diff options
455 files changed, 7454 insertions, 3419 deletions
diff --git a/Documentation/arm/Samsung-S3C24XX/GPIO.txt b/Documentation/arm/Samsung-S3C24XX/GPIO.txt index b5d20c0b2ab..ea7ccfc4b27 100644 --- a/Documentation/arm/Samsung-S3C24XX/GPIO.txt +++ b/Documentation/arm/Samsung-S3C24XX/GPIO.txt @@ -13,6 +13,21 @@ Introduction data-sheet/users manual to find out the complete list. +GPIOLIB +------- + + With the event of the GPIOLIB in drivers/gpio, support for some + of the GPIO functions such as reading and writing a pin will + be removed in favour of this common access method. + + Once all the extant drivers have been converted, the functions + listed below will be removed (they may be marked as __deprecated + in the near future). + + - s3c2410_gpio_getpin + - s3c2410_gpio_setpin + + Headers ------- diff --git a/Documentation/arm/Samsung-S3C24XX/Overview.txt b/Documentation/arm/Samsung-S3C24XX/Overview.txt index 014a8ec4877..cff6227b448 100644 --- a/Documentation/arm/Samsung-S3C24XX/Overview.txt +++ b/Documentation/arm/Samsung-S3C24XX/Overview.txt @@ -8,9 +8,10 @@ Introduction The Samsung S3C24XX range of ARM9 System-on-Chip CPUs are supported by the 's3c2410' architecture of ARM Linux. Currently the S3C2410, - S3C2412, S3C2413, S3C2440 and S3C2442 devices are supported. + S3C2412, S3C2413, S3C2440, S3C2442 and S3C2443 devices are supported. + + Support for the S3C2400 and S3C24A0 series are in progress. - Support for the S3C2400 series is in progress. Configuration ------------- @@ -38,6 +39,22 @@ Layout Register, kernel and platform data definitions are held in the arch/arm/mach-s3c2410 directory./include/mach +arch/arm/plat-s3c24xx: + + Files in here are either common to all the s3c24xx family, + or are common to only some of them with names to indicate this + status. The files that are not common to all are generally named + with the initial cpu they support in the series to ensure a short + name without any possibility of confusion with newer devices. + + As an example, initially s3c244x would cover s3c2440 and s3c2442, but + with the s3c2443 which does not share many of the same drivers in + this directory, the name becomes invalid. We stick to s3c2440-<x> + to indicate a driver that is s3c2440 and s3c2442 compatible. + + This does mean that to find the status of any given SoC, a number + of directories may need to be searched. + Machines -------- @@ -159,6 +176,17 @@ NAND For more information see Documentation/arm/Samsung-S3C24XX/NAND.txt +SD/MMC +------ + + The SD/MMC hardware pre S3C2443 is supported in the current + kernel, the driver is drivers/mmc/host/s3cmci.c and supports + 1 and 4 bit SD or MMC cards. + + The SDIO behaviour of this driver has not been fully tested. There is no + current support for hardware SDIO interrupts. + + Serial ------ @@ -178,6 +206,9 @@ GPIO The core contains support for manipulating the GPIO, see the documentation in GPIO.txt in the same directory as this file. + Newer kernels carry GPIOLIB, and support is being moved towards + this with some of the older support in line to be removed. + Clock Management ---------------- diff --git a/Documentation/filesystems/ubifs.txt b/Documentation/filesystems/ubifs.txt index 540e9e7f59c..6a0d70a22f0 100644 --- a/Documentation/filesystems/ubifs.txt +++ b/Documentation/filesystems/ubifs.txt @@ -57,7 +57,7 @@ Similarly to JFFS2, UBIFS supports on-the-flight compression which makes it possible to fit quite a lot of data to the flash. Similarly to JFFS2, UBIFS is tolerant of unclean reboots and power-cuts. -It does not need stuff like ckfs.ext2. UBIFS automatically replays its +It does not need stuff like fsck.ext2. UBIFS automatically replays its journal and recovers from crashes, ensuring that the on-flash data structures are consistent. diff --git a/Documentation/hwmon/ibmaem b/Documentation/hwmon/ibmaem index 2fefaf582a4..e98bdfea346 100644 --- a/Documentation/hwmon/ibmaem +++ b/Documentation/hwmon/ibmaem @@ -1,8 +1,11 @@ Kernel driver ibmaem ====================== +This driver talks to the IBM Systems Director Active Energy Manager, known +henceforth as AEM. + Supported systems: - * Any recent IBM System X server with Active Energy Manager support. + * Any recent IBM System X server with AEM support. This includes the x3350, x3550, x3650, x3655, x3755, x3850 M2, x3950 M2, and certain HS2x/LS2x/QS2x blades. The IPMI host interface driver ("ipmi-si") needs to be loaded for this driver to do anything. @@ -14,24 +17,22 @@ Author: Darrick J. Wong Description ----------- -This driver implements sensor reading support for the energy and power -meters available on various IBM System X hardware through the BMC. All -sensor banks will be exported as platform devices; this driver can talk -to both v1 and v2 interfaces. This driver is completely separate from the -older ibmpex driver. +This driver implements sensor reading support for the energy and power meters +available on various IBM System X hardware through the BMC. All sensor banks +will be exported as platform devices; this driver can talk to both v1 and v2 +interfaces. This driver is completely separate from the older ibmpex driver. -The v1 AEM interface has a simple set of features to monitor energy use. -There is a register that displays an estimate of raw energy consumption -since the last BMC reset, and a power sensor that returns average power -use over a configurable interval. +The v1 AEM interface has a simple set of features to monitor energy use. There +is a register that displays an estimate of raw energy consumption since the +last BMC reset, and a power sensor that returns average power use over a +configurable interval. -The v2 AEM interface is a bit more sophisticated, being able to present -a wider range of energy and power use registers, the power cap as -set by the AEM software, and temperature sensors. +The v2 AEM interface is a bit more sophisticated, being able to present a wider +range of energy and power use registers, the power cap as set by the AEM +software, and temperature sensors. Special Features ---------------- -The "power_cap" value displays the current system power cap, as set by -the Active Energy Manager software. Setting the power cap from the host -is not currently supported. +The "power_cap" value displays the current system power cap, as set by the AEM +software. Setting the power cap from the host is not currently supported. diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt index 02dc748b76c..71f0fe1fc1b 100644 --- a/Documentation/laptops/thinkpad-acpi.txt +++ b/Documentation/laptops/thinkpad-acpi.txt @@ -44,7 +44,7 @@ detailed description): - LCD brightness control - Volume control - Fan control and monitoring: fan speed, fan enable/disable - - Experimental: WAN enable and disable + - WAN enable and disable A compatibility table by model and feature is maintained on the web site, http://ibm-acpi.sf.net/. I appreciate any success or failure @@ -1375,18 +1375,13 @@ with EINVAL, try to set pwm1_enable to 1 and pwm1 to at least 128 (255 would be the safest choice, though). -EXPERIMENTAL: WAN ------------------ +WAN +--- procfs: /proc/acpi/ibm/wan sysfs device attribute: wwan_enable (deprecated) sysfs rfkill class: switch "tpacpi_wwan_sw" -This feature is marked EXPERIMENTAL because the implementation -directly accesses hardware registers and may not work as expected. USE -WITH CAUTION! To use this feature, you need to supply the -experimental=1 parameter when loading the module. - This feature shows the presence and current state of a W-WAN (Sierra Wireless EV-DO) device. diff --git a/Documentation/sound/alsa/ALSA-Configuration.txt b/Documentation/sound/alsa/ALSA-Configuration.txt index 6f6d117ac7e..b117e42a616 100644 --- a/Documentation/sound/alsa/ALSA-Configuration.txt +++ b/Documentation/sound/alsa/ALSA-Configuration.txt @@ -1144,8 +1144,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. This module supports autoprobe and multiple cards. - Power management is _not_ supported. - Module snd-ice1712 ------------------ @@ -1628,8 +1626,6 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. This module supports autoprobe and multiple cards. - Power management is _not_ supported. - Module snd-pcsp ----------------- @@ -2081,13 +2077,11 @@ Prior to version 0.9.0rc4 options had a 'snd_' prefix. This was removed. Module snd-virtuoso ------------------- - Module for sound cards based on the Asus AV200 chip, i.e., - Xonar D2 and Xonar D2X. + Module for sound cards based on the Asus AV100/AV200 chips, + i.e., Xonar D1, DX, D2 and D2X. This module supports autoprobe and multiple cards. - Power management is _not_ supported. - Module snd-vx222 ---------------- diff --git a/Documentation/vm/page_migration b/Documentation/vm/page_migration index 99f89aa1016..d5fdfd34bba 100644 --- a/Documentation/vm/page_migration +++ b/Documentation/vm/page_migration @@ -18,10 +18,11 @@ migrate_pages function call takes two sets of nodes and moves pages of a process that are located on the from nodes to the destination nodes. Page migration functions are provided by the numactl package by Andi Kleen (a version later than 0.9.3 is required. Get it from -ftp://ftp.suse.com/pub/people/ak). numactl provided libnuma which -provides an interface similar to other numa functionality for page migration. -cat /proc/<pid>/numa_maps allows an easy review of where the pages of -a process are located. See also the numa_maps manpage in the numactl package. +ftp://oss.sgi.com/www/projects/libnuma/download/). numactl provides libnuma +which provides an interface similar to other numa functionality for page +migration. cat /proc/<pid>/numa_maps allows an easy review of where the +pages of a process are located. See also the numa_maps documentation in the +proc(5) man page. Manual migration is useful if for example the scheduler has relocated a process to a processor on a distant node. A batch scheduler or an diff --git a/MAINTAINERS b/MAINTAINERS index 4c5e9fe0f7d..9fc7c1c7e1b 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -175,12 +175,18 @@ M: bcrl@kvack.org L: linux-aio@kvack.org S: Supported -ABIT UGURU HARDWARE MONITOR DRIVER +ABIT UGURU 1,2 HARDWARE MONITOR DRIVER P: Hans de Goede M: j.w.r.degoede@hhs.nl L: lm-sensors@lm-sensors.org S: Maintained +ABIT UGURU 3 HARDWARE MONITOR DRIVER +P: Alistair John Strachan +M: alistair@devzero.co.uk +L: lm-sensors@lm-sensors.org +S: Maintained + ACENIC DRIVER P: Jes Sorensen M: jes@trained-monkey.org @@ -216,8 +222,7 @@ W: http://code.google.com/p/aceracpi S: Maintained ACPI -P: Andi Kleen -M: ak@linux.intel.com +P: Len Brown M: lenb@kernel.org L: linux-acpi@vger.kernel.org W: http://www.lesswatts.org/projects/acpi/ @@ -3748,6 +3753,16 @@ L: linux-visws-devel@lists.sf.net W: http://linux-visws.sf.net S: Maintained for 2.6. +SGI GRU DRIVER +P: Jack Steiner +M: steiner@sgi.com +S: Maintained + +SGI XP/XPC/XPNET DRIVER +P: Dean Nelson +M: dcn@sgi.com +S: Maintained + SIMTEC EB110ATX (Chalice CATS) P: Ben Dooks P: Vincent Sanders diff --git a/include/asm-alpha/8253pit.h b/arch/alpha/include/asm/8253pit.h index fef5c1450e4..fef5c1450e4 100644 --- a/include/asm-alpha/8253pit.h +++ b/arch/alpha/include/asm/8253pit.h diff --git a/include/asm-alpha/Kbuild b/arch/alpha/include/asm/Kbuild index b7c8f188b31..b7c8f188b31 100644 --- a/include/asm-alpha/Kbuild +++ b/arch/alpha/include/asm/Kbuild diff --git a/include/asm-alpha/a.out-core.h b/arch/alpha/include/asm/a.out-core.h index 9e33e92e524..9e33e92e524 100644 --- a/include/asm-alpha/a.out-core.h +++ b/arch/alpha/include/asm/a.out-core.h diff --git a/include/asm-alpha/a.out.h b/arch/alpha/include/asm/a.out.h index 02ce8473870..02ce8473870 100644 --- a/include/asm-alpha/a.out.h +++ b/arch/alpha/include/asm/a.out.h diff --git a/include/asm-alpha/agp.h b/arch/alpha/include/asm/agp.h index 26c17913529..26c17913529 100644 --- a/include/asm-alpha/agp.h +++ b/arch/alpha/include/asm/agp.h diff --git a/include/asm-alpha/agp_backend.h b/arch/alpha/include/asm/agp_backend.h index 55dd44a2cea..55dd44a2cea 100644 --- a/include/asm-alpha/agp_backend.h +++ b/arch/alpha/include/asm/agp_backend.h diff --git a/include/asm-alpha/atomic.h b/arch/alpha/include/asm/atomic.h index ca88e54dec9..ca88e54dec9 100644 --- a/include/asm-alpha/atomic.h +++ b/arch/alpha/include/asm/atomic.h diff --git a/include/asm-alpha/auxvec.h b/arch/alpha/include/asm/auxvec.h index e96fe880e31..e96fe880e31 100644 --- a/include/asm-alpha/auxvec.h +++ b/arch/alpha/include/asm/auxvec.h diff --git a/include/asm-alpha/barrier.h b/arch/alpha/include/asm/barrier.h index ac78eba909b..ac78eba909b 100644 --- a/include/asm-alpha/barrier.h +++ b/arch/alpha/include/asm/barrier.h diff --git a/include/asm-alpha/bitops.h b/arch/alpha/include/asm/bitops.h index 15f3ae25c51..15f3ae25c51 100644 --- a/include/asm-alpha/bitops.h +++ b/arch/alpha/include/asm/bitops.h diff --git a/include/asm-alpha/bug.h b/arch/alpha/include/asm/bug.h index 695a5ee4b5d..695a5ee4b5d 100644 --- a/include/asm-alpha/bug.h +++ b/arch/alpha/include/asm/bug.h diff --git a/include/asm-alpha/bugs.h b/arch/alpha/include/asm/bugs.h index 78030d1c7e7..78030d1c7e7 100644 --- a/include/asm-alpha/bugs.h +++ b/arch/alpha/include/asm/bugs.h diff --git a/include/asm-alpha/byteorder.h b/arch/alpha/include/asm/byteorder.h index 58e958fc7f1..58e958fc7f1 100644 --- a/include/asm-alpha/byteorder.h +++ b/arch/alpha/include/asm/byteorder.h diff --git a/include/asm-alpha/cache.h b/arch/alpha/include/asm/cache.h index f199e69a5d0..f199e69a5d0 100644 --- a/include/asm-alpha/cache.h +++ b/arch/alpha/include/asm/cache.h diff --git a/include/asm-alpha/cacheflush.h b/arch/alpha/include/asm/cacheflush.h index b686cc7fc44..b686cc7fc44 100644 --- a/include/asm-alpha/cacheflush.h +++ b/arch/alpha/include/asm/cacheflush.h diff --git a/include/asm-alpha/checksum.h b/arch/alpha/include/asm/checksum.h index d3854bbf0a9..d3854bbf0a9 100644 --- a/include/asm-alpha/checksum.h +++ b/arch/alpha/include/asm/checksum.h diff --git a/include/asm-alpha/compiler.h b/arch/alpha/include/asm/compiler.h index da6bb199839..da6bb199839 100644 --- a/include/asm-alpha/compiler.h +++ b/arch/alpha/include/asm/compiler.h diff --git a/include/asm-alpha/console.h b/arch/alpha/include/asm/console.h index a3ce4e62249..a3ce4e62249 100644 --- a/include/asm-alpha/console.h +++ b/arch/alpha/include/asm/console.h diff --git a/include/asm-alpha/core_apecs.h b/arch/alpha/include/asm/core_apecs.h index 6785ff7e02b..6785ff7e02b 100644 --- a/include/asm-alpha/core_apecs.h +++ b/arch/alpha/include/asm/core_apecs.h diff --git a/include/asm-alpha/core_cia.h b/arch/alpha/include/asm/core_cia.h index 9e0516c0ca2..9e0516c0ca2 100644 --- a/include/asm-alpha/core_cia.h +++ b/arch/alpha/include/asm/core_cia.h diff --git a/include/asm-alpha/core_irongate.h b/arch/alpha/include/asm/core_irongate.h index 24b2db54150..24b2db54150 100644 --- a/include/asm-alpha/core_irongate.h +++ b/arch/alpha/include/asm/core_irongate.h diff --git a/include/asm-alpha/core_lca.h b/arch/alpha/include/asm/core_lca.h index f7cb4b46095..f7cb4b46095 100644 --- a/include/asm-alpha/core_lca.h +++ b/arch/alpha/include/asm/core_lca.h diff --git a/include/asm-alpha/core_marvel.h b/arch/alpha/include/asm/core_marvel.h index 30d55fe7aaf..30d55fe7aaf 100644 --- a/include/asm-alpha/core_marvel.h +++ b/arch/alpha/include/asm/core_marvel.h diff --git a/include/asm-alpha/core_mcpcia.h b/arch/alpha/include/asm/core_mcpcia.h index acf55b48347..acf55b48347 100644 --- a/include/asm-alpha/core_mcpcia.h +++ b/arch/alpha/include/asm/core_mcpcia.h diff --git a/include/asm-alpha/core_polaris.h b/arch/alpha/include/asm/core_polaris.h index 2f966b64659..2f966b64659 100644 --- a/include/asm-alpha/core_polaris.h +++ b/arch/alpha/include/asm/core_polaris.h diff --git a/include/asm-alpha/core_t2.h b/arch/alpha/include/asm/core_t2.h index 46bfff58f67..46bfff58f67 100644 --- a/include/asm-alpha/core_t2.h +++ b/arch/alpha/include/asm/core_t2.h diff --git a/include/asm-alpha/core_titan.h b/arch/alpha/include/asm/core_titan.h index a17f6f33b68..a17f6f33b68 100644 --- a/include/asm-alpha/core_titan.h +++ b/arch/alpha/include/asm/core_titan.h diff --git a/include/asm-alpha/core_tsunami.h b/arch/alpha/include/asm/core_tsunami.h index 58d4fe48742..58d4fe48742 100644 --- a/include/asm-alpha/core_tsunami.h +++ b/arch/alpha/include/asm/core_tsunami.h diff --git a/include/asm-alpha/core_wildfire.h b/arch/alpha/include/asm/core_wildfire.h index cd562f544ba..cd562f544ba 100644 --- a/include/asm-alpha/core_wildfire.h +++ b/arch/alpha/include/asm/core_wildfire.h diff --git a/include/asm-alpha/cputime.h b/arch/alpha/include/asm/cputime.h index 19577fd9323..19577fd9323 100644 --- a/include/asm-alpha/cputime.h +++ b/arch/alpha/include/asm/cputime.h diff --git a/include/asm-alpha/current.h b/arch/alpha/include/asm/current.h index 094d285a1b3..094d285a1b3 100644 --- a/include/asm-alpha/current.h +++ b/arch/alpha/include/asm/current.h diff --git a/include/asm-alpha/delay.h b/arch/alpha/include/asm/delay.h index 2aa3f410f7e..2aa3f410f7e 100644 --- a/include/asm-alpha/delay.h +++ b/arch/alpha/include/asm/delay.h diff --git a/include/asm-alpha/device.h b/arch/alpha/include/asm/device.h index d8f9872b0e2..d8f9872b0e2 100644 --- a/include/asm-alpha/device.h +++ b/arch/alpha/include/asm/device.h diff --git a/include/asm-alpha/div64.h b/arch/alpha/include/asm/div64.h index 6cd978cefb2..6cd978cefb2 100644 --- a/include/asm-alpha/div64.h +++ b/arch/alpha/include/asm/div64.h diff --git a/include/asm-alpha/dma-mapping.h b/arch/alpha/include/asm/dma-mapping.h index a5801ae02e4..a5801ae02e4 100644 --- a/include/asm-alpha/dma-mapping.h +++ b/arch/alpha/include/asm/dma-mapping.h diff --git a/include/asm-alpha/dma.h b/arch/alpha/include/asm/dma.h index 87cfdbdf08f..87cfdbdf08f 100644 --- a/include/asm-alpha/dma.h +++ b/arch/alpha/include/asm/dma.h diff --git a/include/asm-alpha/elf.h b/arch/alpha/include/asm/elf.h index fc1002ea1e0..fc1002ea1e0 100644 --- a/include/asm-alpha/elf.h +++ b/arch/alpha/include/asm/elf.h diff --git a/include/asm-alpha/emergency-restart.h b/arch/alpha/include/asm/emergency-restart.h index 108d8c48e42..108d8c48e42 100644 --- a/include/asm-alpha/emergency-restart.h +++ b/arch/alpha/include/asm/emergency-restart.h diff --git a/include/asm-alpha/err_common.h b/arch/alpha/include/asm/err_common.h index c2509594210..c2509594210 100644 --- a/include/asm-alpha/err_common.h +++ b/arch/alpha/include/asm/err_common.h diff --git a/include/asm-alpha/err_ev6.h b/arch/alpha/include/asm/err_ev6.h index ea637791e4a..ea637791e4a 100644 --- a/include/asm-alpha/err_ev6.h +++ b/arch/alpha/include/asm/err_ev6.h diff --git a/include/asm-alpha/err_ev7.h b/arch/alpha/include/asm/err_ev7.h index 87f99777c2e..87f99777c2e 100644 --- a/include/asm-alpha/err_ev7.h +++ b/arch/alpha/include/asm/err_ev7.h diff --git a/include/asm-alpha/errno.h b/arch/alpha/include/asm/errno.h index 69e2655249d..69e2655249d 100644 --- a/include/asm-alpha/errno.h +++ b/arch/alpha/include/asm/errno.h diff --git a/include/asm-alpha/fb.h b/arch/alpha/include/asm/fb.h index fa9bbb96b2b..fa9bbb96b2b 100644 --- a/include/asm-alpha/fb.h +++ b/arch/alpha/include/asm/fb.h diff --git a/include/asm-alpha/fcntl.h b/arch/alpha/include/asm/fcntl.h index 25da0017ec8..25da0017ec8 100644 --- a/include/asm-alpha/fcntl.h +++ b/arch/alpha/include/asm/fcntl.h diff --git a/include/asm-alpha/floppy.h b/arch/alpha/include/asm/floppy.h index 0be50413b2b..0be50413b2b 100644 --- a/include/asm-alpha/floppy.h +++ b/arch/alpha/include/asm/floppy.h diff --git a/include/asm-alpha/fpu.h b/arch/alpha/include/asm/fpu.h index ecb17a72acc..ecb17a72acc 100644 --- a/include/asm-alpha/fpu.h +++ b/arch/alpha/include/asm/fpu.h diff --git a/include/asm-alpha/futex.h b/arch/alpha/include/asm/futex.h index 6a332a9f099..6a332a9f099 100644 --- a/include/asm-alpha/futex.h +++ b/arch/alpha/include/asm/futex.h diff --git a/include/asm-alpha/gct.h b/arch/alpha/include/asm/gct.h index 3504c704927..3504c704927 100644 --- a/include/asm-alpha/gct.h +++ b/arch/alpha/include/asm/gct.h diff --git a/include/asm-alpha/gentrap.h b/arch/alpha/include/asm/gentrap.h index ae50cc3192c..ae50cc3192c 100644 --- a/include/asm-alpha/gentrap.h +++ b/arch/alpha/include/asm/gentrap.h diff --git a/include/asm-alpha/hardirq.h b/arch/alpha/include/asm/hardirq.h index d953e234daa..d953e234daa 100644 --- a/include/asm-alpha/hardirq.h +++ b/arch/alpha/include/asm/hardirq.h diff --git a/include/asm-alpha/hw_irq.h b/arch/alpha/include/asm/hw_irq.h index a37db0f9509..a37db0f9509 100644 --- a/include/asm-alpha/hw_irq.h +++ b/arch/alpha/include/asm/hw_irq.h diff --git a/include/asm-alpha/hwrpb.h b/arch/alpha/include/asm/hwrpb.h index 8e8f871af7c..8e8f871af7c 100644 --- a/include/asm-alpha/hwrpb.h +++ b/arch/alpha/include/asm/hwrpb.h diff --git a/include/asm-alpha/io.h b/arch/alpha/include/asm/io.h index e971ab000f9..e971ab000f9 100644 --- a/include/asm-alpha/io.h +++ b/arch/alpha/include/asm/io.h diff --git a/include/asm-alpha/io_trivial.h b/arch/alpha/include/asm/io_trivial.h index 1c77f10b4b3..1c77f10b4b3 100644 --- a/include/asm-alpha/io_trivial.h +++ b/arch/alpha/include/asm/io_trivial.h diff --git a/include/asm-alpha/ioctl.h b/arch/alpha/include/asm/ioctl.h index fc63727f417..fc63727f417 100644 --- a/include/asm-alpha/ioctl.h +++ b/arch/alpha/include/asm/ioctl.h diff --git a/include/asm-alpha/ioctls.h b/arch/alpha/include/asm/ioctls.h index 67bb9f6fdbe..67bb9f6fdbe 100644 --- a/include/asm-alpha/ioctls.h +++ b/arch/alpha/include/asm/ioctls.h diff --git a/include/asm-alpha/ipcbuf.h b/arch/alpha/include/asm/ipcbuf.h index d9c0e1a5070..d9c0e1a5070 100644 --- a/include/asm-alpha/ipcbuf.h +++ b/arch/alpha/include/asm/ipcbuf.h diff --git a/include/asm-alpha/irq.h b/arch/alpha/include/asm/irq.h index 06377400dc0..06377400dc0 100644 --- a/include/asm-alpha/irq.h +++ b/arch/alpha/include/asm/irq.h diff --git a/include/asm-alpha/irq_regs.h b/arch/alpha/include/asm/irq_regs.h index 3dd9c0b7027..3dd9c0b7027 100644 --- a/include/asm-alpha/irq_regs.h +++ b/arch/alpha/include/asm/irq_regs.h diff --git a/include/asm-alpha/jensen.h b/arch/alpha/include/asm/jensen.h index 964b06ead43..964b06ead43 100644 --- a/include/asm-alpha/jensen.h +++ b/arch/alpha/include/asm/jensen.h diff --git a/include/asm-alpha/kdebug.h b/arch/alpha/include/asm/kdebug.h index 6ece1b03766..6ece1b03766 100644 --- a/include/asm-alpha/kdebug.h +++ b/arch/alpha/include/asm/kdebug.h diff --git a/include/asm-alpha/kmap_types.h b/arch/alpha/include/asm/kmap_types.h index 3e6735a34c5..3e6735a34c5 100644 --- a/include/asm-alpha/kmap_types.h +++ b/arch/alpha/include/asm/kmap_types.h diff --git a/include/asm-alpha/linkage.h b/arch/alpha/include/asm/linkage.h index 291c2d01c44..291c2d01c44 100644 --- a/include/asm-alpha/linkage.h +++ b/arch/alpha/include/asm/linkage.h diff --git a/include/asm-alpha/local.h b/arch/alpha/include/asm/local.h index 6ad3ea69642..6ad3ea69642 100644 --- a/include/asm-alpha/local.h +++ b/arch/alpha/include/asm/local.h diff --git a/include/asm-alpha/machvec.h b/arch/alpha/include/asm/machvec.h index a86c083cdf7..a86c083cdf7 100644 --- a/include/asm-alpha/machvec.h +++ b/arch/alpha/include/asm/machvec.h diff --git a/include/asm-alpha/mc146818rtc.h b/arch/alpha/include/asm/mc146818rtc.h index 097703f1c8c..097703f1c8c 100644 --- a/include/asm-alpha/mc146818rtc.h +++ b/arch/alpha/include/asm/mc146818rtc.h diff --git a/include/asm-alpha/md.h b/arch/alpha/include/asm/md.h index 6c9b8222a4f..6c9b8222a4f 100644 --- a/include/asm-alpha/md.h +++ b/arch/alpha/include/asm/md.h diff --git a/include/asm-alpha/mman.h b/arch/alpha/include/asm/mman.h index 90d7c35d286..90d7c35d286 100644 --- a/include/asm-alpha/mman.h +++ b/arch/alpha/include/asm/mman.h diff --git a/include/asm-alpha/mmu.h b/arch/alpha/include/asm/mmu.h index 3dc12777932..3dc12777932 100644 --- a/include/asm-alpha/mmu.h +++ b/arch/alpha/include/asm/mmu.h diff --git a/include/asm-alpha/mmu_context.h b/arch/alpha/include/asm/mmu_context.h index 86c08a02d23..86c08a02d23 100644 --- a/include/asm-alpha/mmu_context.h +++ b/arch/alpha/include/asm/mmu_context.h diff --git a/include/asm-alpha/mmzone.h b/arch/alpha/include/asm/mmzone.h index 8af56ce346a..8af56ce346a 100644 --- a/include/asm-alpha/mmzone.h +++ b/arch/alpha/include/asm/mmzone.h diff --git a/include/asm-alpha/module.h b/arch/alpha/include/asm/module.h index 7b63743c534..7b63743c534 100644 --- a/include/asm-alpha/module.h +++ b/arch/alpha/include/asm/module.h diff --git a/include/asm-alpha/msgbuf.h b/arch/alpha/include/asm/msgbuf.h index 98496501a2b..98496501a2b 100644 --- a/include/asm-alpha/msgbuf.h +++ b/arch/alpha/include/asm/msgbuf.h diff --git a/include/asm-alpha/mutex.h b/arch/alpha/include/asm/mutex.h index 458c1f7fbc1..458c1f7fbc1 100644 --- a/include/asm-alpha/mutex.h +++ b/arch/alpha/include/asm/mutex.h diff --git a/include/asm-alpha/page.h b/arch/alpha/include/asm/page.h index 0995f9d1341..0995f9d1341 100644 --- a/include/asm-alpha/page.h +++ b/arch/alpha/include/asm/page.h diff --git a/include/asm-alpha/pal.h b/arch/alpha/include/asm/pal.h index 9b4ba0d6f00..9b4ba0d6f00 100644 --- a/include/asm-alpha/pal.h +++ b/arch/alpha/include/asm/pal.h diff --git a/include/asm-alpha/param.h b/arch/alpha/include/asm/param.h index e691ecfedb2..e691ecfedb2 100644 --- a/include/asm-alpha/param.h +++ b/arch/alpha/include/asm/param.h diff --git a/include/asm-alpha/parport.h b/arch/alpha/include/asm/parport.h index c5ee7cbb2fc..c5ee7cbb2fc 100644 --- a/include/asm-alpha/parport.h +++ b/arch/alpha/include/asm/parport.h diff --git a/include/asm-alpha/pci.h b/arch/alpha/include/asm/pci.h index 2a14302c17a..2a14302c17a 100644 --- a/include/asm-alpha/pci.h +++ b/arch/alpha/include/asm/pci.h diff --git a/include/asm-alpha/percpu.h b/arch/alpha/include/asm/percpu.h index 3495e8e00d7..3495e8e00d7 100644 --- a/include/asm-alpha/percpu.h +++ b/arch/alpha/include/asm/percpu.h diff --git a/include/asm-alpha/pgalloc.h b/arch/alpha/include/asm/pgalloc.h index fd090155dcc..fd090155dcc 100644 --- a/include/asm-alpha/pgalloc.h +++ b/arch/alpha/include/asm/pgalloc.h diff --git a/include/asm-alpha/pgtable.h b/arch/alpha/include/asm/pgtable.h index 3f0c59f6d8a..3f0c59f6d8a 100644 --- a/include/asm-alpha/pgtable.h +++ b/arch/alpha/include/asm/pgtable.h diff --git a/include/asm-alpha/poll.h b/arch/alpha/include/asm/poll.h index c98509d3149..c98509d3149 100644 --- a/include/asm-alpha/poll.h +++ b/arch/alpha/include/asm/poll.h diff --git a/include/asm-alpha/posix_types.h b/arch/alpha/include/asm/posix_types.h index db167413300..db167413300 100644 --- a/include/asm-alpha/posix_types.h +++ b/arch/alpha/include/asm/posix_types.h diff --git a/include/asm-alpha/processor.h b/arch/alpha/include/asm/processor.h index 94afe585930..94afe585930 100644 --- a/include/asm-alpha/processor.h +++ b/arch/alpha/include/asm/processor.h diff --git a/include/asm-alpha/ptrace.h b/arch/alpha/include/asm/ptrace.h index 32c7a5cddd5..32c7a5cddd5 100644 --- a/include/asm-alpha/ptrace.h +++ b/arch/alpha/include/asm/ptrace.h diff --git a/include/asm-alpha/reg.h b/arch/alpha/include/asm/reg.h index 86ff916fb06..86ff916fb06 100644 --- a/include/asm-alpha/reg.h +++ b/arch/alpha/include/asm/reg.h diff --git a/include/asm-alpha/regdef.h b/arch/alpha/include/asm/regdef.h index 142df9c4f8b..142df9c4f8b 100644 --- a/include/asm-alpha/regdef.h +++ b/arch/alpha/include/asm/regdef.h diff --git a/include/asm-alpha/resource.h b/arch/alpha/include/asm/resource.h index c10874ff597..c10874ff597 100644 --- a/include/asm-alpha/resource.h +++ b/arch/alpha/include/asm/resource.h diff --git a/include/asm-alpha/rtc.h b/arch/alpha/include/asm/rtc.h index 4e854b1333e..4e854b1333e 100644 --- a/include/asm-alpha/rtc.h +++ b/arch/alpha/include/asm/rtc.h diff --git a/include/asm-alpha/rwsem.h b/arch/alpha/include/asm/rwsem.h index 1570c0b5433..1570c0b5433 100644 --- a/include/asm-alpha/rwsem.h +++ b/arch/alpha/include/asm/rwsem.h diff --git a/include/asm-alpha/scatterlist.h b/arch/alpha/include/asm/scatterlist.h index 440747ca634..440747ca634 100644 --- a/include/asm-alpha/scatterlist.h +++ b/arch/alpha/include/asm/scatterlist.h diff --git a/include/asm-alpha/sections.h b/arch/alpha/include/asm/sections.h index 43b40edd6e4..43b40edd6e4 100644 --- a/include/asm-alpha/sections.h +++ b/arch/alpha/include/asm/sections.h diff --git a/include/asm-alpha/segment.h b/arch/alpha/include/asm/segment.h index 0453d97daae..0453d97daae 100644 --- a/include/asm-alpha/segment.h +++ b/arch/alpha/include/asm/segment.h diff --git a/include/asm-alpha/sembuf.h b/arch/alpha/include/asm/sembuf.h index 7b38b153478..7b38b153478 100644 --- a/include/asm-alpha/sembuf.h +++ b/arch/alpha/include/asm/sembuf.h diff --git a/include/asm-alpha/serial.h b/arch/alpha/include/asm/serial.h index 9d263e8d8cc..9d263e8d8cc 100644 --- a/include/asm-alpha/serial.h +++ b/arch/alpha/include/asm/serial.h diff --git a/include/asm-alpha/setup.h b/arch/alpha/include/asm/setup.h index 2e023a4aa31..2e023a4aa31 100644 --- a/include/asm-alpha/setup.h +++ b/arch/alpha/include/asm/setup.h diff --git a/include/asm-alpha/sfp-machine.h b/arch/alpha/include/asm/sfp-machine.h index 5fe63afbd47..5fe63afbd47 100644 --- a/include/asm-alpha/sfp-machine.h +++ b/arch/alpha/include/asm/sfp-machine.h diff --git a/include/asm-alpha/shmbuf.h b/arch/alpha/include/asm/shmbuf.h index 37ee84f0508..37ee84f0508 100644 --- a/include/asm-alpha/shmbuf.h +++ b/arch/alpha/include/asm/shmbuf.h diff --git a/include/asm-alpha/shmparam.h b/arch/alpha/include/asm/shmparam.h index cc901d58aeb..cc901d58aeb 100644 --- a/include/asm-alpha/shmparam.h +++ b/arch/alpha/include/asm/shmparam.h diff --git a/include/asm-alpha/sigcontext.h b/arch/alpha/include/asm/sigcontext.h index 323cdb02619..323cdb02619 100644 --- a/include/asm-alpha/sigcontext.h +++ b/arch/alpha/include/asm/sigcontext.h diff --git a/include/asm-alpha/siginfo.h b/arch/alpha/include/asm/siginfo.h index 9822362a842..9822362a842 100644 --- a/include/asm-alpha/siginfo.h +++ b/arch/alpha/include/asm/siginfo.h diff --git a/include/asm-alpha/signal.h b/arch/alpha/include/asm/signal.h index 13c2305d35e..13c2305d35e 100644 --- a/include/asm-alpha/signal.h +++ b/arch/alpha/include/asm/signal.h diff --git a/include/asm-alpha/smp.h b/arch/alpha/include/asm/smp.h index 544c69af816..544c69af816 100644 --- a/include/asm-alpha/smp.h +++ b/arch/alpha/include/asm/smp.h diff --git a/include/asm-alpha/socket.h b/arch/alpha/include/asm/socket.h index a1057c2d95e..a1057c2d95e 100644 --- a/include/asm-alpha/socket.h +++ b/arch/alpha/include/asm/socket.h diff --git a/include/asm-alpha/sockios.h b/arch/alpha/include/asm/sockios.h index 7932c7ab4a4..7932c7ab4a4 100644 --- a/include/asm-alpha/sockios.h +++ b/arch/alpha/include/asm/sockios.h diff --git a/include/asm-alpha/spinlock.h b/arch/alpha/include/asm/spinlock.h index aeeb125f685..aeeb125f685 100644 --- a/include/asm-alpha/spinlock.h +++ b/arch/alpha/include/asm/spinlock.h diff --git a/include/asm-alpha/spinlock_types.h b/arch/alpha/include/asm/spinlock_types.h index 8141eb5ebf0..8141eb5ebf0 100644 --- a/include/asm-alpha/spinlock_types.h +++ b/arch/alpha/include/asm/spinlock_types.h diff --git a/include/asm-alpha/stat.h b/arch/alpha/include/asm/stat.h index 07ad3e6b3f3..07ad3e6b3f3 100644 --- a/include/asm-alpha/stat.h +++ b/arch/alpha/include/asm/stat.h diff --git a/include/asm-alpha/statfs.h b/arch/alpha/include/asm/statfs.h index ad15830baef..ad15830baef 100644 --- a/include/asm-alpha/statfs.h +++ b/arch/alpha/include/asm/statfs.h diff --git a/include/asm-alpha/string.h b/arch/alpha/include/asm/string.h index b02b8a28294..b02b8a28294 100644 --- a/include/asm-alpha/string.h +++ b/arch/alpha/include/asm/string.h diff --git a/include/asm-alpha/suspend.h b/arch/alpha/include/asm/suspend.h index c7042d57585..c7042d57585 100644 --- a/include/asm-alpha/suspend.h +++ b/arch/alpha/include/asm/suspend.h diff --git a/include/asm-alpha/sysinfo.h b/arch/alpha/include/asm/sysinfo.h index 086aba284df..086aba284df 100644 --- a/include/asm-alpha/sysinfo.h +++ b/arch/alpha/include/asm/sysinfo.h diff --git a/include/asm-alpha/system.h b/arch/alpha/include/asm/system.h index afe20fa58c9..afe20fa58c9 100644 --- a/include/asm-alpha/system.h +++ b/arch/alpha/include/asm/system.h diff --git a/include/asm-alpha/termbits.h b/arch/alpha/include/asm/termbits.h index ad854a4a3af..ad854a4a3af 100644 --- a/include/asm-alpha/termbits.h +++ b/arch/alpha/include/asm/termbits.h diff --git a/include/asm-alpha/termios.h b/arch/alpha/include/asm/termios.h index fa13716a11c..fa13716a11c 100644 --- a/include/asm-alpha/termios.h +++ b/arch/alpha/include/asm/termios.h diff --git a/include/asm-alpha/thread_info.h b/arch/alpha/include/asm/thread_info.h index 15fda434442..15fda434442 100644 --- a/include/asm-alpha/thread_info.h +++ b/arch/alpha/include/asm/thread_info.h diff --git a/include/asm-alpha/timex.h b/arch/alpha/include/asm/timex.h index afa0c45e3e9..afa0c45e3e9 100644 --- a/include/asm-alpha/timex.h +++ b/arch/alpha/include/asm/timex.h diff --git a/include/asm-alpha/tlb.h b/arch/alpha/include/asm/tlb.h index c13636575fb..c13636575fb 100644 --- a/include/asm-alpha/tlb.h +++ b/arch/alpha/include/asm/tlb.h diff --git a/include/asm-alpha/tlbflush.h b/arch/alpha/include/asm/tlbflush.h index 9d87aaa08c0..9d87aaa08c0 100644 --- a/include/asm-alpha/tlbflush.h +++ b/arch/alpha/include/asm/tlbflush.h diff --git a/include/asm-alpha/topology.h b/arch/alpha/include/asm/topology.h index 149532e162c..149532e162c 100644 --- a/include/asm-alpha/topology.h +++ b/arch/alpha/include/asm/topology.h diff --git a/include/asm-alpha/types.h b/arch/alpha/include/asm/types.h index c1541353cce..c1541353cce 100644 --- a/include/asm-alpha/types.h +++ b/arch/alpha/include/asm/types.h diff --git a/include/asm-alpha/uaccess.h b/arch/alpha/include/asm/uaccess.h index 22de3b434a2..22de3b434a2 100644 --- a/include/asm-alpha/uaccess.h +++ b/arch/alpha/include/asm/uaccess.h diff --git a/include/asm-alpha/ucontext.h b/arch/alpha/include/asm/ucontext.h index 47578ab4215..47578ab4215 100644 --- a/include/asm-alpha/ucontext.h +++ b/arch/alpha/include/asm/ucontext.h diff --git a/include/asm-alpha/unaligned.h b/arch/alpha/include/asm/unaligned.h index 3787c60aed3..3787c60aed3 100644 --- a/include/asm-alpha/unaligned.h +++ b/arch/alpha/include/asm/unaligned.h diff --git a/include/asm-alpha/unistd.h b/arch/alpha/include/asm/unistd.h index 5b5c1748594..5b5c1748594 100644 --- a/include/asm-alpha/unistd.h +++ b/arch/alpha/include/asm/unistd.h diff --git a/include/asm-alpha/user.h b/arch/alpha/include/asm/user.h index a4eb6a4ca8d..a4eb6a4ca8d 100644 --- a/include/asm-alpha/user.h +++ b/arch/alpha/include/asm/user.h diff --git a/include/asm-alpha/vga.h b/arch/alpha/include/asm/vga.h index c00106bac52..c00106bac52 100644 --- a/include/asm-alpha/vga.h +++ b/arch/alpha/include/asm/vga.h diff --git a/include/asm-alpha/xor.h b/arch/alpha/include/asm/xor.h index 5ee1c2bc049..5ee1c2bc049 100644 --- a/include/asm-alpha/xor.h +++ b/arch/alpha/include/asm/xor.h diff --git a/arch/arm/boot/compressed/.gitignore b/arch/arm/boot/compressed/.gitignore index b15f927a592..ab204db594d 100644 --- a/arch/arm/boot/compressed/.gitignore +++ b/arch/arm/boot/compressed/.gitignore @@ -1,2 +1,3 @@ -piggy.gz font.c +piggy.gz +vmlinux.lds diff --git a/arch/arm/common/dmabounce.c b/arch/arm/common/dmabounce.c index 69130f36590..aecc6c3f908 100644 --- a/arch/arm/common/dmabounce.c +++ b/arch/arm/common/dmabounce.c @@ -246,9 +246,9 @@ map_single(struct device *dev, void *ptr, size_t size, } dev_dbg(dev, - "%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n", - __func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr), - buf->safe, (void *) buf->safe_dma_addr); + "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", + __func__, buf->ptr, virt_to_dma(dev, buf->ptr), + buf->safe, buf->safe_dma_addr); if ((dir == DMA_TO_DEVICE) || (dir == DMA_BIDIRECTIONAL)) { @@ -292,9 +292,9 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, BUG_ON(buf->size != size); dev_dbg(dev, - "%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n", - __func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr), - buf->safe, (void *) buf->safe_dma_addr); + "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", + __func__, buf->ptr, virt_to_dma(dev, buf->ptr), + buf->safe, buf->safe_dma_addr); DO_STATS ( device_info->bounce_count++ ); @@ -321,9 +321,8 @@ unmap_single(struct device *dev, dma_addr_t dma_addr, size_t size, } } -static inline void -sync_single(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction dir) +static int sync_single(struct device *dev, dma_addr_t dma_addr, size_t size, + enum dma_data_direction dir) { struct dmabounce_device_info *device_info = dev->archdata.dmabounce; struct safe_buffer *buf = NULL; @@ -355,9 +354,9 @@ sync_single(struct device *dev, dma_addr_t dma_addr, size_t size, */ dev_dbg(dev, - "%s: unsafe buffer %p (phy=%p) mapped to %p (phy=%p)\n", - __func__, buf->ptr, (void *) virt_to_dma(dev, buf->ptr), - buf->safe, (void *) buf->safe_dma_addr); + "%s: unsafe buffer %p (dma=%#x) mapped to %p (dma=%#x)\n", + __func__, buf->ptr, virt_to_dma(dev, buf->ptr), + buf->safe, buf->safe_dma_addr); DO_STATS ( device_info->bounce_count++ ); @@ -383,8 +382,9 @@ sync_single(struct device *dev, dma_addr_t dma_addr, size_t size, * No need to sync the safe buffer - it was allocated * via the coherent allocators. */ + return 0; } else { - dma_cache_maint(dma_to_virt(dev, dma_addr), size, dir); + return 1; } } @@ -474,25 +474,29 @@ dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nents, } } -void -dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction dir) +void dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t dma_addr, + unsigned long offset, size_t size, + enum dma_data_direction dir) { - dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n", - __func__, (void *) dma_addr, size, dir); + dev_dbg(dev, "%s(dma=%#x,off=%#lx,size=%zx,dir=%x)\n", + __func__, dma_addr, offset, size, dir); - sync_single(dev, dma_addr, size, dir); + if (sync_single(dev, dma_addr, offset + size, dir)) + dma_cache_maint(dma_to_virt(dev, dma_addr) + offset, size, dir); } +EXPORT_SYMBOL(dma_sync_single_range_for_cpu); -void -dma_sync_single_for_device(struct device *dev, dma_addr_t dma_addr, size_t size, - enum dma_data_direction dir) +void dma_sync_single_range_for_device(struct device *dev, dma_addr_t dma_addr, + unsigned long offset, size_t size, + enum dma_data_direction dir) { - dev_dbg(dev, "%s(ptr=%p,size=%d,dir=%x)\n", - __func__, (void *) dma_addr, size, dir); + dev_dbg(dev, "%s(dma=%#x,off=%#lx,size=%zx,dir=%x)\n", + __func__, dma_addr, offset, size, dir); - sync_single(dev, dma_addr, size, dir); + if (sync_single(dev, dma_addr, offset + size, dir)) + dma_cache_maint(dma_to_virt(dev, dma_addr) + offset, size, dir); } +EXPORT_SYMBOL(dma_sync_single_range_for_device); void dma_sync_sg_for_cpu(struct device *dev, struct scatterlist *sg, int nents, @@ -644,8 +648,6 @@ EXPORT_SYMBOL(dma_map_single); EXPORT_SYMBOL(dma_unmap_single); EXPORT_SYMBOL(dma_map_sg); EXPORT_SYMBOL(dma_unmap_sg); -EXPORT_SYMBOL(dma_sync_single_for_cpu); -EXPORT_SYMBOL(dma_sync_single_for_device); EXPORT_SYMBOL(dma_sync_sg_for_cpu); EXPORT_SYMBOL(dma_sync_sg_for_device); EXPORT_SYMBOL(dmabounce_register_dev); diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 9578b5d9f9c..1464ffe7171 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -757,7 +757,14 @@ CONFIG_INPUT_EVDEV=y # # Input Device Drivers # -# CONFIG_INPUT_KEYBOARD is not set +CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ATKBD is not set +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +CONFIG_KEYBOARD_GPIO=y # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TABLET is not set @@ -1111,11 +1118,11 @@ CONFIG_RTC_DRV_DS1307=y CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_ISL1208 is not set # CONFIG_RTC_DRV_X1205 is not set -# CONFIG_RTC_DRV_PCF8563 is not set +CONFIG_RTC_DRV_PCF8563=y # CONFIG_RTC_DRV_PCF8583 is not set CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set -# CONFIG_RTC_DRV_S35390A is not set +CONFIG_RTC_DRV_S35390A=y # # SPI RTC drivers diff --git a/arch/arm/include/asm/dma-mapping.h b/arch/arm/include/asm/dma-mapping.h index 45329fca1b6..7b95d205839 100644 --- a/arch/arm/include/asm/dma-mapping.h +++ b/arch/arm/include/asm/dma-mapping.h @@ -3,11 +3,48 @@ #ifdef __KERNEL__ -#include <linux/mm.h> /* need struct page */ - +#include <linux/mm_types.h> #include <linux/scatterlist.h> #include <asm-generic/dma-coherent.h> +#include <asm/memory.h> + +/* + * page_to_dma/dma_to_virt/virt_to_dma are architecture private functions + * used internally by the DMA-mapping API to provide DMA addresses. They + * must not be used by drivers. + */ +#ifndef __arch_page_to_dma +static inline dma_addr_t page_to_dma(struct device *dev, struct page *page) +{ + return (dma_addr_t)__virt_to_bus((unsigned long)page_address(page)); +} + +static inline void *dma_to_virt(struct device *dev, dma_addr_t addr) +{ + return (void *)__bus_to_virt(addr); +} + +static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) +{ + return (dma_addr_t)__virt_to_bus((unsigned long)(addr)); +} +#else +static inline dma_addr_t page_to_dma(struct device *dev, struct page *page) +{ + return __arch_page_to_dma(dev, page); +} + +static inline void *dma_to_virt(struct device *dev, dma_addr_t addr) +{ + return __arch_dma_to_virt(dev, addr); +} + +static inline dma_addr_t virt_to_dma(struct device *dev, void *addr) +{ + return __arch_virt_to_dma(dev, addr); +} +#endif /* * DMA-consistent mapping functions. These allocate/free a region of @@ -169,7 +206,7 @@ dma_map_single(struct device *dev, void *cpu_addr, size_t size, if (!arch_is_coherent()) dma_cache_maint(cpu_addr, size, dir); - return virt_to_dma(dev, (unsigned long)cpu_addr); + return virt_to_dma(dev, cpu_addr); } #else extern dma_addr_t dma_map_single(struct device *,void *, size_t, enum dma_data_direction); @@ -195,7 +232,7 @@ dma_map_page(struct device *dev, struct page *page, unsigned long offset, size_t size, enum dma_data_direction dir) { - return dma_map_single(dev, page_address(page) + offset, size, (int)dir); + return dma_map_single(dev, page_address(page) + offset, size, dir); } /** @@ -241,7 +278,7 @@ static inline void dma_unmap_page(struct device *dev, dma_addr_t handle, size_t size, enum dma_data_direction dir) { - dma_unmap_single(dev, handle, size, (int)dir); + dma_unmap_single(dev, handle, size, dir); } /** @@ -314,11 +351,12 @@ extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_da /** - * dma_sync_single_for_cpu + * dma_sync_single_range_for_cpu * @dev: valid struct device pointer, or NULL for ISA and EISA-like devices * @handle: DMA address of buffer - * @size: size of buffer to map - * @dir: DMA transfer direction + * @offset: offset of region to start sync + * @size: size of region to sync + * @dir: DMA transfer direction (same as passed to dma_map_single) * * Make physical memory consistent for a single streaming mode DMA * translation after a transfer. @@ -332,25 +370,41 @@ extern void dma_unmap_sg(struct device *, struct scatterlist *, int, enum dma_da */ #ifndef CONFIG_DMABOUNCE static inline void -dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, - enum dma_data_direction dir) +dma_sync_single_range_for_cpu(struct device *dev, dma_addr_t handle, + unsigned long offset, size_t size, + enum dma_data_direction dir) { if (!arch_is_coherent()) - dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir); + dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir); } static inline void -dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size, - enum dma_data_direction dir) +dma_sync_single_range_for_device(struct device *dev, dma_addr_t handle, + unsigned long offset, size_t size, + enum dma_data_direction dir) { if (!arch_is_coherent()) - dma_cache_maint((void *)dma_to_virt(dev, handle), size, dir); + dma_cache_maint(dma_to_virt(dev, handle) + offset, size, dir); } #else -extern void dma_sync_single_for_cpu(struct device*, dma_addr_t, size_t, enum dma_data_direction); -extern void dma_sync_single_for_device(struct device*, dma_addr_t, size_t, enum dma_data_direction); +extern void dma_sync_single_range_for_cpu(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction); +extern void dma_sync_single_range_for_device(struct device *, dma_addr_t, unsigned long, size_t, enum dma_data_direction); #endif +static inline void +dma_sync_single_for_cpu(struct device *dev, dma_addr_t handle, size_t size, + enum dma_data_direction dir) +{ + dma_sync_single_range_for_cpu(dev, handle, 0, size, dir); +} + +static inline void +dma_sync_single_for_device(struct device *dev, dma_addr_t handle, size_t size, + enum dma_data_direction dir) +{ + dma_sync_single_range_for_device(dev, handle, 0, size, dir); +} + /** * dma_sync_sg_for_cpu diff --git a/arch/arm/include/asm/kexec.h b/arch/arm/include/asm/kexec.h index c8986bb99ed..df15a0dc228 100644 --- a/arch/arm/include/asm/kexec.h +++ b/arch/arm/include/asm/kexec.h @@ -10,7 +10,7 @@ /* Maximum address we can use for the control code buffer */ #define KEXEC_CONTROL_MEMORY_LIMIT (-1UL) -#define KEXEC_CONTROL_CODE_SIZE 4096 +#define KEXEC_CONTROL_PAGE_SIZE 4096 #define KEXEC_ARCH KEXEC_ARCH_ARM diff --git a/arch/arm/include/asm/memory.h b/arch/arm/include/asm/memory.h index 1e070a2b561..bf7c737c922 100644 --- a/arch/arm/include/asm/memory.h +++ b/arch/arm/include/asm/memory.h @@ -150,6 +150,14 @@ #endif /* + * Amount of memory reserved for the vmalloc() area, and minimum + * address for vmalloc mappings. + */ +extern unsigned long vmalloc_reserve; + +#define VMALLOC_MIN (void *)(VMALLOC_END - vmalloc_reserve) + +/* * PFNs are used to describe any physical page; this means * PFN 0 == physical address 0. * @@ -306,20 +314,6 @@ static inline __deprecated void *bus_to_virt(unsigned long x) #define page_to_phys(page) (page_to_pfn(page) << PAGE_SHIFT) /* - * Optional device DMA address remapping. Do _not_ use directly! - * We should really eliminate virt_to_bus() here - it's deprecated. - */ -#ifndef __arch_page_to_dma -#define page_to_dma(dev, page) ((dma_addr_t)__virt_to_bus((unsigned long)page_address(page))) -#define dma_to_virt(dev, addr) ((void *)__bus_to_virt(addr)) -#define virt_to_dma(dev, addr) ((dma_addr_t)__virt_to_bus((unsigned long)(addr))) -#else -#define page_to_dma(dev, page) (__arch_page_to_dma(dev, page)) -#define dma_to_virt(dev, addr) (__arch_dma_to_virt(dev, addr)) -#define virt_to_dma(dev, addr) (__arch_virt_to_dma(dev, addr)) -#endif - -/* * Optional coherency support. Currently used only by selected * Intel XSC3-based systems. */ diff --git a/arch/arm/include/asm/mtd-xip.h b/arch/arm/include/asm/mtd-xip.h index 4225372a26f..d8fbe2d9b8b 100644 --- a/arch/arm/include/asm/mtd-xip.h +++ b/arch/arm/include/asm/mtd-xip.h @@ -10,8 +10,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $ */ #ifndef __ARM_MTD_XIP_H__ diff --git a/arch/arm/include/asm/processor.h b/arch/arm/include/asm/processor.h index b01d5e7e3d5..517a4d6ffc7 100644 --- a/arch/arm/include/asm/processor.h +++ b/arch/arm/include/asm/processor.h @@ -112,9 +112,9 @@ extern int kernel_thread(int (*fn)(void *), void *arg, unsigned long flags); static inline void prefetch(const void *ptr) { __asm__ __volatile__( - "pld\t%0" + "pld\t%a0" : - : "o" (*(char *)ptr) + : "p" (ptr) : "cc"); } diff --git a/arch/arm/include/asm/tlbflush.h b/arch/arm/include/asm/tlbflush.h index 0d0d40f1b59..b543a054a17 100644 --- a/arch/arm/include/asm/tlbflush.h +++ b/arch/arm/include/asm/tlbflush.h @@ -54,6 +54,7 @@ * v4wbi - ARMv4 with write buffer with I TLB flush entry instruction * fr - Feroceon (v4wbi with non-outer-cacheable page table walks) * v6wbi - ARMv6 with write buffer with I TLB flush entry instruction + * v7wbi - identical to v6wbi */ #undef _TLB #undef MULTI_TLB @@ -266,14 +267,16 @@ extern struct cpu_tlb_fns cpu_tlb; v4wbi_possible_flags | \ fr_possible_flags | \ v4wb_possible_flags | \ - v6wbi_possible_flags) + v6wbi_possible_flags | \ + v7wbi_possible_flags) #define always_tlb_flags (v3_always_flags & \ v4_always_flags & \ v4wbi_always_flags & \ fr_always_flags & \ v4wb_always_flags & \ - v6wbi_always_flags) + v6wbi_always_flags & \ + v7wbi_always_flags) #define tlb_flag(f) ((always_tlb_flags & (f)) || (__tlb_flag & possible_tlb_flags & (f))) diff --git a/arch/arm/include/asm/unistd.h b/arch/arm/include/asm/unistd.h index f95fbb2fcb5..010618487cf 100644 --- a/arch/arm/include/asm/unistd.h +++ b/arch/arm/include/asm/unistd.h @@ -381,6 +381,12 @@ #define __NR_fallocate (__NR_SYSCALL_BASE+352) #define __NR_timerfd_settime (__NR_SYSCALL_BASE+353) #define __NR_timerfd_gettime (__NR_SYSCALL_BASE+354) +#define __NR_signalfd4 (__NR_SYSCALL_BASE+355) +#define __NR_eventfd2 (__NR_SYSCALL_BASE+356) +#define __NR_epoll_create1 (__NR_SYSCALL_BASE+357) +#define __NR_dup3 (__NR_SYSCALL_BASE+358) +#define __NR_pipe2 (__NR_SYSCALL_BASE+359) +#define __NR_inotify_init1 (__NR_SYSCALL_BASE+360) /* * The following SWIs are ARM private. diff --git a/arch/arm/kernel/.gitignore b/arch/arm/kernel/.gitignore new file mode 100644 index 00000000000..c5f676c3c22 --- /dev/null +++ b/arch/arm/kernel/.gitignore @@ -0,0 +1 @@ +vmlinux.lds diff --git a/arch/arm/kernel/calls.S b/arch/arm/kernel/calls.S index 30a67a5a40a..09a061cb783 100644 --- a/arch/arm/kernel/calls.S +++ b/arch/arm/kernel/calls.S @@ -262,10 +262,10 @@ /* 250 */ CALL(sys_epoll_create) CALL(ABI(sys_epoll_ctl, sys_oabi_epoll_ctl)) CALL(ABI(sys_epoll_wait, sys_oabi_epoll_wait)) - CALL(sys_remap_file_pages) + CALL(sys_remap_file_pages) CALL(sys_ni_syscall) /* sys_set_thread_area */ /* 255 */ CALL(sys_ni_syscall) /* sys_get_thread_area */ - CALL(sys_set_tid_address) + CALL(sys_set_tid_address) CALL(sys_timer_create) CALL(sys_timer_settime) CALL(sys_timer_gettime) @@ -364,6 +364,12 @@ CALL(sys_fallocate) CALL(sys_timerfd_settime) CALL(sys_timerfd_gettime) +/* 355 */ CALL(sys_signalfd4) + CALL(sys_eventfd2) + CALL(sys_epoll_create1) + CALL(sys_dup3) + CALL(sys_pipe2) +/* 360 */ CALL(sys_inotify_init1) #ifndef syscalls_counted .equ syscalls_padding, ((NR_syscalls + 3) & ~3) - NR_syscalls #define syscalls_counted diff --git a/arch/arm/kernel/machine_kexec.c b/arch/arm/kernel/machine_kexec.c index db8f54a3451..fae5beb3c3d 100644 --- a/arch/arm/kernel/machine_kexec.c +++ b/arch/arm/kernel/machine_kexec.c @@ -71,7 +71,7 @@ void machine_kexec(struct kimage *image) flush_icache_range((unsigned long) reboot_code_buffer, - (unsigned long) reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE); + (unsigned long) reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE); printk(KERN_INFO "Bye!\n"); cpu_proc_fin(); diff --git a/arch/arm/kernel/setup.c b/arch/arm/kernel/setup.c index 38f0e7940a1..2ca7038b67a 100644 --- a/arch/arm/kernel/setup.c +++ b/arch/arm/kernel/setup.c @@ -81,6 +81,8 @@ EXPORT_SYMBOL(system_serial_high); unsigned int elf_hwcap; EXPORT_SYMBOL(elf_hwcap); +unsigned long __initdata vmalloc_reserve = 128 << 20; + #ifdef MULTI_CPU struct processor processor; @@ -501,6 +503,17 @@ static void __init early_mem(char **p) __early_param("mem=", early_mem); /* + * vmalloc=size forces the vmalloc area to be exactly 'size' + * bytes. This can be used to increase (or decrease) the vmalloc + * area - the default is 128m. + */ +static void __init early_vmalloc(char **arg) +{ + vmalloc_reserve = memparse(*arg, arg); +} +__early_param("vmalloc=", early_vmalloc); + +/* * Initial parsing of the command line. */ static void __init parse_cmdline(char **cmdline_p, char *from) diff --git a/arch/arm/kernel/traps.c b/arch/arm/kernel/traps.c index 7277aef8309..872f1f8fbb5 100644 --- a/arch/arm/kernel/traps.c +++ b/arch/arm/kernel/traps.c @@ -288,14 +288,28 @@ void unregister_undef_hook(struct undef_hook *hook) spin_unlock_irqrestore(&undef_lock, flags); } +static int call_undef_hook(struct pt_regs *regs, unsigned int instr) +{ + struct undef_hook *hook; + unsigned long flags; + int (*fn)(struct pt_regs *regs, unsigned int instr) = NULL; + + spin_lock_irqsave(&undef_lock, flags); + list_for_each_entry(hook, &undef_hook, node) + if ((instr & hook->instr_mask) == hook->instr_val && + (regs->ARM_cpsr & hook->cpsr_mask) == hook->cpsr_val) + fn = hook->fn; + spin_unlock_irqrestore(&undef_lock, flags); + + return fn ? fn(regs, instr) : 1; +} + asmlinkage void __exception do_undefinstr(struct pt_regs *regs) { unsigned int correction = thumb_mode(regs) ? 2 : 4; unsigned int instr; - struct undef_hook *hook; siginfo_t info; void __user *pc; - unsigned long flags; /* * According to the ARM ARM, PC is 2 or 4 bytes ahead, @@ -325,17 +339,8 @@ asmlinkage void __exception do_undefinstr(struct pt_regs *regs) } #endif - spin_lock_irqsave(&undef_lock, flags); - list_for_each_entry(hook, &undef_hook, node) { - if ((instr & hook->instr_mask) == hook->instr_val && - (regs->ARM_cpsr & hook->cpsr_mask) == hook->cpsr_val) { - if (hook->fn(regs, instr) == 0) { - spin_unlock_irqrestore(&undef_lock, flags); - return; - } - } - } - spin_unlock_irqrestore(&undef_lock, flags); + if (call_undef_hook(regs, instr) == 0) + return; #ifdef CONFIG_DEBUG_USER if (user_debug & UDBG_UNDEFINED) { diff --git a/arch/arm/mach-footbridge/cats-pci.c b/arch/arm/mach-footbridge/cats-pci.c index 35eb232a649..ae3e1c8c758 100644 --- a/arch/arm/mach-footbridge/cats-pci.c +++ b/arch/arm/mach-footbridge/cats-pci.c @@ -18,6 +18,9 @@ static int irqmap_cats[] __initdata = { IRQ_PCI, IRQ_IN0, IRQ_IN1, IRQ_IN3 }; static int __init cats_map_irq(struct pci_dev *dev, u8 slot, u8 pin) { + if (dev->irq >= 255) + return -1; /* not a valid interrupt. */ + if (dev->irq >= 128) return dev->irq & 0x1f; diff --git a/arch/arm/mach-integrator/cpu.c b/arch/arm/mach-integrator/cpu.c index ce5ea7c2667..7c49d55e6b2 100644 --- a/arch/arm/mach-integrator/cpu.c +++ b/arch/arm/mach-integrator/cpu.c @@ -3,8 +3,6 @@ * * Copyright (C) 2001-2002 Deep Blue Solutions Ltd. * - * $Id: cpu.c,v 1.6 2002/07/18 13:58:51 rmk Exp $ - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. diff --git a/arch/arm/mach-integrator/include/mach/platform.h b/arch/arm/mach-integrator/include/mach/platform.h index 83c4c1ceb41..028b87839c0 100644 --- a/arch/arm/mach-integrator/include/mach/platform.h +++ b/arch/arm/mach-integrator/include/mach/platform.h @@ -26,8 +26,6 @@ * NOTE: This is a multi-hosted header file for use with uHAL and * supported debuggers. * - * $Id: platform.s,v 1.32 2000/02/18 10:51:39 asims Exp $ - * * ***********************************************************************/ #ifndef __address_h diff --git a/arch/arm/mach-kirkwood/common.c b/arch/arm/mach-kirkwood/common.c index 0e509b8ad56..189f16f3619 100644 --- a/arch/arm/mach-kirkwood/common.c +++ b/arch/arm/mach-kirkwood/common.c @@ -15,15 +15,17 @@ #include <linux/mbus.h> #include <linux/mv643xx_eth.h> #include <linux/ata_platform.h> +#include <linux/spi/orion_spi.h> #include <asm/page.h> #include <asm/timex.h> #include <asm/mach/map.h> #include <asm/mach/time.h> #include <mach/kirkwood.h> -#include <asm/plat-orion/cache-feroceon-l2.h> -#include <asm/plat-orion/ehci-orion.h> -#include <asm/plat-orion/orion_nand.h> -#include <asm/plat-orion/time.h> +#include <plat/cache-feroceon-l2.h> +#include <plat/ehci-orion.h> +#include <plat/mv_xor.h> +#include <plat/orion_nand.h> +#include <plat/time.h> #include "common.h" /***************************************************************************** @@ -196,6 +198,37 @@ void __init kirkwood_sata_init(struct mv_sata_platform_data *sata_data) /***************************************************************************** + * SPI + ****************************************************************************/ +static struct orion_spi_info kirkwood_spi_plat_data = { + .tclk = KIRKWOOD_TCLK, +}; + +static struct resource kirkwood_spi_resources[] = { + { + .start = SPI_PHYS_BASE, + .end = SPI_PHYS_BASE + SZ_512 - 1, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device kirkwood_spi = { + .name = "orion_spi", + .id = 0, + .resource = kirkwood_spi_resources, + .dev = { + .platform_data = &kirkwood_spi_plat_data, + }, + .num_resources = ARRAY_SIZE(kirkwood_spi_resources), +}; + +void __init kirkwood_spi_init() +{ + platform_device_register(&kirkwood_spi); +} + + +/***************************************************************************** * UART0 ****************************************************************************/ static struct plat_serial8250_port kirkwood_uart0_data[] = { @@ -284,6 +317,212 @@ void __init kirkwood_uart1_init(void) /***************************************************************************** + * XOR + ****************************************************************************/ +static struct mv_xor_platform_shared_data kirkwood_xor_shared_data = { + .dram = &kirkwood_mbus_dram_info, +}; + +static u64 kirkwood_xor_dmamask = DMA_32BIT_MASK; + + +/***************************************************************************** + * XOR0 + ****************************************************************************/ +static struct resource kirkwood_xor0_shared_resources[] = { + { + .name = "xor 0 low", + .start = XOR0_PHYS_BASE, + .end = XOR0_PHYS_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, { + .name = "xor 0 high", + .start = XOR0_HIGH_PHYS_BASE, + .end = XOR0_HIGH_PHYS_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device kirkwood_xor0_shared = { + .name = MV_XOR_SHARED_NAME, + .id = 0, + .dev = { + .platform_data = &kirkwood_xor_shared_data, + }, + .num_resources = ARRAY_SIZE(kirkwood_xor0_shared_resources), + .resource = kirkwood_xor0_shared_resources, +}; + +static struct resource kirkwood_xor00_resources[] = { + [0] = { + .start = IRQ_KIRKWOOD_XOR_00, + .end = IRQ_KIRKWOOD_XOR_00, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mv_xor_platform_data kirkwood_xor00_data = { + .shared = &kirkwood_xor0_shared, + .hw_id = 0, + .pool_size = PAGE_SIZE, +}; + +static struct platform_device kirkwood_xor00_channel = { + .name = MV_XOR_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(kirkwood_xor00_resources), + .resource = kirkwood_xor00_resources, + .dev = { + .dma_mask = &kirkwood_xor_dmamask, + .coherent_dma_mask = DMA_64BIT_MASK, + .platform_data = (void *)&kirkwood_xor00_data, + }, +}; + +static struct resource kirkwood_xor01_resources[] = { + [0] = { + .start = IRQ_KIRKWOOD_XOR_01, + .end = IRQ_KIRKWOOD_XOR_01, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mv_xor_platform_data kirkwood_xor01_data = { + .shared = &kirkwood_xor0_shared, + .hw_id = 1, + .pool_size = PAGE_SIZE, +}; + +static struct platform_device kirkwood_xor01_channel = { + .name = MV_XOR_NAME, + .id = 1, + .num_resources = ARRAY_SIZE(kirkwood_xor01_resources), + .resource = kirkwood_xor01_resources, + .dev = { + .dma_mask = &kirkwood_xor_dmamask, + .coherent_dma_mask = DMA_64BIT_MASK, + .platform_data = (void *)&kirkwood_xor01_data, + }, +}; + +void __init kirkwood_xor0_init(void) +{ + platform_device_register(&kirkwood_xor0_shared); + + /* + * two engines can't do memset simultaneously, this limitation + * satisfied by removing memset support from one of the engines. + */ + dma_cap_set(DMA_MEMCPY, kirkwood_xor00_data.cap_mask); + dma_cap_set(DMA_XOR, kirkwood_xor00_data.cap_mask); + platform_device_register(&kirkwood_xor00_channel); + + dma_cap_set(DMA_MEMCPY, kirkwood_xor01_data.cap_mask); + dma_cap_set(DMA_MEMSET, kirkwood_xor01_data.cap_mask); + dma_cap_set(DMA_XOR, kirkwood_xor01_data.cap_mask); + platform_device_register(&kirkwood_xor01_channel); +} + + +/***************************************************************************** + * XOR1 + ****************************************************************************/ +static struct resource kirkwood_xor1_shared_resources[] = { + { + .name = "xor 1 low", + .start = XOR1_PHYS_BASE, + .end = XOR1_PHYS_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, { + .name = "xor 1 high", + .start = XOR1_HIGH_PHYS_BASE, + .end = XOR1_HIGH_PHYS_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device kirkwood_xor1_shared = { + .name = MV_XOR_SHARED_NAME, + .id = 1, + .dev = { + .platform_data = &kirkwood_xor_shared_data, + }, + .num_resources = ARRAY_SIZE(kirkwood_xor1_shared_resources), + .resource = kirkwood_xor1_shared_resources, +}; + +static struct resource kirkwood_xor10_resources[] = { + [0] = { + .start = IRQ_KIRKWOOD_XOR_10, + .end = IRQ_KIRKWOOD_XOR_10, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mv_xor_platform_data kirkwood_xor10_data = { + .shared = &kirkwood_xor1_shared, + .hw_id = 0, + .pool_size = PAGE_SIZE, +}; + +static struct platform_device kirkwood_xor10_channel = { + .name = MV_XOR_NAME, + .id = 2, + .num_resources = ARRAY_SIZE(kirkwood_xor10_resources), + .resource = kirkwood_xor10_resources, + .dev = { + .dma_mask = &kirkwood_xor_dmamask, + .coherent_dma_mask = DMA_64BIT_MASK, + .platform_data = (void *)&kirkwood_xor10_data, + }, +}; + +static struct resource kirkwood_xor11_resources[] = { + [0] = { + .start = IRQ_KIRKWOOD_XOR_11, + .end = IRQ_KIRKWOOD_XOR_11, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mv_xor_platform_data kirkwood_xor11_data = { + .shared = &kirkwood_xor1_shared, + .hw_id = 1, + .pool_size = PAGE_SIZE, +}; + +static struct platform_device kirkwood_xor11_channel = { + .name = MV_XOR_NAME, + .id = 3, + .num_resources = ARRAY_SIZE(kirkwood_xor11_resources), + .resource = kirkwood_xor11_resources, + .dev = { + .dma_mask = &kirkwood_xor_dmamask, + .coherent_dma_mask = DMA_64BIT_MASK, + .platform_data = (void *)&kirkwood_xor11_data, + }, +}; + +void __init kirkwood_xor1_init(void) +{ + platform_device_register(&kirkwood_xor1_shared); + + /* + * two engines can't do memset simultaneously, this limitation + * satisfied by removing memset support from one of the engines. + */ + dma_cap_set(DMA_MEMCPY, kirkwood_xor10_data.cap_mask); + dma_cap_set(DMA_XOR, kirkwood_xor10_data.cap_mask); + platform_device_register(&kirkwood_xor10_channel); + + dma_cap_set(DMA_MEMCPY, kirkwood_xor11_data.cap_mask); + dma_cap_set(DMA_MEMSET, kirkwood_xor11_data.cap_mask); + dma_cap_set(DMA_XOR, kirkwood_xor11_data.cap_mask); + platform_device_register(&kirkwood_xor11_channel); +} + + +/***************************************************************************** * Time handling ****************************************************************************/ static void kirkwood_timer_init(void) diff --git a/arch/arm/mach-kirkwood/common.h b/arch/arm/mach-kirkwood/common.h index 5dee2f6b40a..69cd113af03 100644 --- a/arch/arm/mach-kirkwood/common.h +++ b/arch/arm/mach-kirkwood/common.h @@ -33,8 +33,11 @@ void kirkwood_ge00_init(struct mv643xx_eth_platform_data *eth_data); void kirkwood_pcie_init(void); void kirkwood_rtc_init(void); void kirkwood_sata_init(struct mv_sata_platform_data *sata_data); +void kirkwood_spi_init(void); void kirkwood_uart0_init(void); void kirkwood_uart1_init(void); +void kirkwood_xor0_init(void); +void kirkwood_xor1_init(void); extern struct sys_timer kirkwood_timer; diff --git a/arch/arm/mach-kirkwood/include/mach/kirkwood.h b/arch/arm/mach-kirkwood/include/mach/kirkwood.h index d1336b41f0f..5c69992295e 100644 --- a/arch/arm/mach-kirkwood/include/mach/kirkwood.h +++ b/arch/arm/mach-kirkwood/include/mach/kirkwood.h @@ -88,6 +88,15 @@ #define USB_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x50000) +#define XOR0_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60800) +#define XOR0_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60800) +#define XOR1_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60900) +#define XOR1_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60900) +#define XOR0_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60A00) +#define XOR0_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60A00) +#define XOR1_HIGH_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x60B00) +#define XOR1_HIGH_VIRT_BASE (KIRKWOOD_REGS_VIRT_BASE | 0x60B00) + #define GE00_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x70000) #define GE01_PHYS_BASE (KIRKWOOD_REGS_PHYS_BASE | 0x74000) diff --git a/arch/arm/mach-kirkwood/irq.c b/arch/arm/mach-kirkwood/irq.c index 302bb2cf666..5790643ffe0 100644 --- a/arch/arm/mach-kirkwood/irq.c +++ b/arch/arm/mach-kirkwood/irq.c @@ -12,7 +12,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/io.h> -#include <asm/plat-orion/irq.h> +#include <plat/irq.h> #include "common.h" void __init kirkwood_init_irq(void) diff --git a/arch/arm/mach-kirkwood/pcie.c b/arch/arm/mach-kirkwood/pcie.c index 8282d0ff84b..2195fa31f6b 100644 --- a/arch/arm/mach-kirkwood/pcie.c +++ b/arch/arm/mach-kirkwood/pcie.c @@ -12,7 +12,7 @@ #include <linux/pci.h> #include <linux/mbus.h> #include <asm/mach/pci.h> -#include <asm/plat-orion/pcie.h> +#include <plat/pcie.h> #include "common.h" diff --git a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c index 182230a5d19..a3012d44597 100644 --- a/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6192-nas-setup.c @@ -18,6 +18,9 @@ #include <linux/timer.h> #include <linux/ata_platform.h> #include <linux/mv643xx_eth.h> +#include <linux/spi/flash.h> +#include <linux/spi/spi.h> +#include <linux/spi/orion_spi.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/pci.h> @@ -34,6 +37,21 @@ static struct mv_sata_platform_data rd88f6192_sata_data = { .n_ports = 2, }; +static const struct flash_platform_data rd88F6192_spi_slave_data = { + .type = "m25p128", +}; + +static struct spi_board_info __initdata rd88F6192_spi_slave_info[] = { + { + .modalias = "m25p80", + .platform_data = &rd88F6192_spi_slave_data, + .irq = -1, + .max_speed_hz = 20000000, + .bus_num = 0, + .chip_select = 0, + }, +}; + static void __init rd88f6192_init(void) { /* @@ -45,7 +63,12 @@ static void __init rd88f6192_init(void) kirkwood_ge00_init(&rd88f6192_ge00_data); kirkwood_rtc_init(); kirkwood_sata_init(&rd88f6192_sata_data); + spi_register_board_info(rd88F6192_spi_slave_info, + ARRAY_SIZE(rd88F6192_spi_slave_info)); + kirkwood_spi_init(); kirkwood_uart0_init(); + kirkwood_xor0_init(); + kirkwood_xor1_init(); } static int __init rd88f6192_pci_init(void) diff --git a/arch/arm/mach-kirkwood/rd88f6281-setup.c b/arch/arm/mach-kirkwood/rd88f6281-setup.c index d8a43018c7d..d96487a0f18 100644 --- a/arch/arm/mach-kirkwood/rd88f6281-setup.c +++ b/arch/arm/mach-kirkwood/rd88f6281-setup.c @@ -23,7 +23,7 @@ #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/kirkwood.h> -#include <asm/plat-orion/orion_nand.h> +#include <plat/orion_nand.h> #include "common.h" static struct mtd_partition rd88f6281_nand_parts[] = { diff --git a/arch/arm/mach-lh7a40x/include/mach/ssp.h b/arch/arm/mach-lh7a40x/include/mach/ssp.h index 132b1c4d5ce..509916182e3 100644 --- a/arch/arm/mach-lh7a40x/include/mach/ssp.h +++ b/arch/arm/mach-lh7a40x/include/mach/ssp.h @@ -1,5 +1,4 @@ /* ssp.h - $Id$ written by Marc Singer 6 Dec 2004 diff --git a/arch/arm/mach-lh7a40x/lcd-panel.h b/arch/arm/mach-lh7a40x/lcd-panel.h index df6e38ed425..a7f5027b2f7 100644 --- a/arch/arm/mach-lh7a40x/lcd-panel.h +++ b/arch/arm/mach-lh7a40x/lcd-panel.h @@ -1,5 +1,4 @@ /* lcd-panel.h - $Id$ written by Marc Singer 18 Jul 2005 diff --git a/arch/arm/mach-loki/common.c b/arch/arm/mach-loki/common.c index e20cdbca1eb..c0d2d9d12e7 100644 --- a/arch/arm/mach-loki/common.c +++ b/arch/arm/mach-loki/common.c @@ -19,8 +19,8 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> #include <mach/loki.h> -#include <asm/plat-orion/orion_nand.h> -#include <asm/plat-orion/time.h> +#include <plat/orion_nand.h> +#include <plat/time.h> #include "common.h" /***************************************************************************** diff --git a/arch/arm/mach-loki/irq.c b/arch/arm/mach-loki/irq.c index d839af91fe0..5a487930cb2 100644 --- a/arch/arm/mach-loki/irq.c +++ b/arch/arm/mach-loki/irq.c @@ -12,7 +12,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <asm/io.h> -#include <asm/plat-orion/irq.h> +#include <plat/irq.h> #include "common.h" void __init loki_init_irq(void) diff --git a/arch/arm/mach-mv78xx0/common.c b/arch/arm/mach-mv78xx0/common.c index e633f9cb239..953a26c469c 100644 --- a/arch/arm/mach-mv78xx0/common.c +++ b/arch/arm/mach-mv78xx0/common.c @@ -18,10 +18,10 @@ #include <asm/mach/map.h> #include <asm/mach/time.h> #include <mach/mv78xx0.h> -#include <asm/plat-orion/cache-feroceon-l2.h> -#include <asm/plat-orion/ehci-orion.h> -#include <asm/plat-orion/orion_nand.h> -#include <asm/plat-orion/time.h> +#include <plat/cache-feroceon-l2.h> +#include <plat/ehci-orion.h> +#include <plat/orion_nand.h> +#include <plat/time.h> #include "common.h" diff --git a/arch/arm/mach-mv78xx0/irq.c b/arch/arm/mach-mv78xx0/irq.c index 3198abf54c9..28248d37b99 100644 --- a/arch/arm/mach-mv78xx0/irq.c +++ b/arch/arm/mach-mv78xx0/irq.c @@ -12,7 +12,7 @@ #include <linux/init.h> #include <linux/pci.h> #include <mach/mv78xx0.h> -#include <asm/plat-orion/irq.h> +#include <plat/irq.h> #include "common.h" void __init mv78xx0_init_irq(void) diff --git a/arch/arm/mach-mv78xx0/pcie.c b/arch/arm/mach-mv78xx0/pcie.c index b78e1443159..430ea84d587 100644 --- a/arch/arm/mach-mv78xx0/pcie.c +++ b/arch/arm/mach-mv78xx0/pcie.c @@ -12,7 +12,7 @@ #include <linux/pci.h> #include <linux/mbus.h> #include <asm/mach/pci.h> -#include <asm/plat-orion/pcie.h> +#include <plat/pcie.h> #include "common.h" struct pcie_port { diff --git a/arch/arm/mach-orion5x/common.c b/arch/arm/mach-orion5x/common.c index 168eeacaa4c..7b11e552bc5 100644 --- a/arch/arm/mach-orion5x/common.c +++ b/arch/arm/mach-orion5x/common.c @@ -26,9 +26,10 @@ #include <asm/mach/time.h> #include <mach/hardware.h> #include <mach/orion5x.h> -#include <asm/plat-orion/ehci-orion.h> -#include <asm/plat-orion/orion_nand.h> -#include <asm/plat-orion/time.h> +#include <plat/ehci-orion.h> +#include <plat/mv_xor.h> +#include <plat/orion_nand.h> +#include <plat/time.h> #include "common.h" /***************************************************************************** @@ -355,6 +356,103 @@ void __init orion5x_uart1_init(void) /***************************************************************************** + * XOR engine + ****************************************************************************/ +static struct resource orion5x_xor_shared_resources[] = { + { + .name = "xor low", + .start = ORION5X_XOR_PHYS_BASE, + .end = ORION5X_XOR_PHYS_BASE + 0xff, + .flags = IORESOURCE_MEM, + }, { + .name = "xor high", + .start = ORION5X_XOR_PHYS_BASE + 0x200, + .end = ORION5X_XOR_PHYS_BASE + 0x2ff, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device orion5x_xor_shared = { + .name = MV_XOR_SHARED_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(orion5x_xor_shared_resources), + .resource = orion5x_xor_shared_resources, +}; + +static u64 orion5x_xor_dmamask = DMA_32BIT_MASK; + +static struct resource orion5x_xor0_resources[] = { + [0] = { + .start = IRQ_ORION5X_XOR0, + .end = IRQ_ORION5X_XOR0, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mv_xor_platform_data orion5x_xor0_data = { + .shared = &orion5x_xor_shared, + .hw_id = 0, + .pool_size = PAGE_SIZE, +}; + +static struct platform_device orion5x_xor0_channel = { + .name = MV_XOR_NAME, + .id = 0, + .num_resources = ARRAY_SIZE(orion5x_xor0_resources), + .resource = orion5x_xor0_resources, + .dev = { + .dma_mask = &orion5x_xor_dmamask, + .coherent_dma_mask = DMA_64BIT_MASK, + .platform_data = (void *)&orion5x_xor0_data, + }, +}; + +static struct resource orion5x_xor1_resources[] = { + [0] = { + .start = IRQ_ORION5X_XOR1, + .end = IRQ_ORION5X_XOR1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct mv_xor_platform_data orion5x_xor1_data = { + .shared = &orion5x_xor_shared, + .hw_id = 1, + .pool_size = PAGE_SIZE, +}; + +static struct platform_device orion5x_xor1_channel = { + .name = MV_XOR_NAME, + .id = 1, + .num_resources = ARRAY_SIZE(orion5x_xor1_resources), + .resource = orion5x_xor1_resources, + .dev = { + .dma_mask = &orion5x_xor_dmamask, + .coherent_dma_mask = DMA_64BIT_MASK, + .platform_data = (void *)&orion5x_xor1_data, + }, +}; + +void __init orion5x_xor_init(void) +{ + platform_device_register(&orion5x_xor_shared); + + /* + * two engines can't do memset simultaneously, this limitation + * satisfied by removing memset support from one of the engines. + */ + dma_cap_set(DMA_MEMCPY, orion5x_xor0_data.cap_mask); + dma_cap_set(DMA_XOR, orion5x_xor0_data.cap_mask); + platform_device_register(&orion5x_xor0_channel); + + dma_cap_set(DMA_MEMCPY, orion5x_xor1_data.cap_mask); + dma_cap_set(DMA_MEMSET, orion5x_xor1_data.cap_mask); + dma_cap_set(DMA_XOR, orion5x_xor1_data.cap_mask); + platform_device_register(&orion5x_xor1_channel); +} + + +/***************************************************************************** * Time handling ****************************************************************************/ static void orion5x_timer_init(void) @@ -382,6 +480,8 @@ static void __init orion5x_id(u32 *dev, u32 *rev, char **dev_name) *dev_name = "MV88F5281-D2"; } else if (*rev == MV88F5281_REV_D1) { *dev_name = "MV88F5281-D1"; + } else if (*rev == MV88F5281_REV_D0) { + *dev_name = "MV88F5281-D0"; } else { *dev_name = "MV88F5281-Rev-Unsupported"; } @@ -416,6 +516,15 @@ void __init orion5x_init(void) * Setup Orion address map */ orion5x_setup_cpu_mbus_bridge(); + + /* + * Don't issue "Wait for Interrupt" instruction if we are + * running on D0 5281 silicon. + */ + if (dev == MV88F5281_DEV_ID && rev == MV88F5281_REV_D0) { + printk(KERN_INFO "Orion: Applying 5281 D0 WFI workaround.\n"); + disable_hlt(); + } } /* diff --git a/arch/arm/mach-orion5x/common.h b/arch/arm/mach-orion5x/common.h index f72cf0e7754..e75bd7004b9 100644 --- a/arch/arm/mach-orion5x/common.h +++ b/arch/arm/mach-orion5x/common.h @@ -32,6 +32,7 @@ void orion5x_i2c_init(void); void orion5x_sata_init(struct mv_sata_platform_data *sata_data); void orion5x_uart0_init(void); void orion5x_uart1_init(void); +void orion5x_xor_init(void); /* * PCIe/PCI functions. diff --git a/arch/arm/mach-orion5x/db88f5281-setup.c b/arch/arm/mach-orion5x/db88f5281-setup.c index 48ce6d0e002..ff13e9060b1 100644 --- a/arch/arm/mach-orion5x/db88f5281-setup.c +++ b/arch/arm/mach-orion5x/db88f5281-setup.c @@ -25,7 +25,7 @@ #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> -#include <asm/plat-orion/orion_nand.h> +#include <plat/orion_nand.h> #include "common.h" #include "mpp.h" diff --git a/arch/arm/mach-orion5x/include/mach/orion5x.h b/arch/arm/mach-orion5x/include/mach/orion5x.h index f52a7d65bec..61eb74a8886 100644 --- a/arch/arm/mach-orion5x/include/mach/orion5x.h +++ b/arch/arm/mach-orion5x/include/mach/orion5x.h @@ -73,6 +73,7 @@ #define MV88F5182_REV_A2 2 /* Orion-2 (88F5281) */ #define MV88F5281_DEV_ID 0x5281 +#define MV88F5281_REV_D0 4 #define MV88F5281_REV_D1 5 #define MV88F5281_REV_D2 6 @@ -105,6 +106,10 @@ #define ORION5X_USB0_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x50000) #define ORION5X_USB0_REG(x) (ORION5X_USB0_VIRT_BASE | (x)) +#define ORION5X_XOR_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x60900) +#define ORION5X_XOR_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x60900) +#define ORION5X_XOR_REG(x) (ORION5X_XOR_VIRT_BASE | (x)) + #define ORION5X_ETH_PHYS_BASE (ORION5X_REGS_PHYS_BASE | 0x70000) #define ORION5X_ETH_VIRT_BASE (ORION5X_REGS_VIRT_BASE | 0x70000) #define ORION5X_ETH_REG(x) (ORION5X_ETH_VIRT_BASE | (x)) diff --git a/arch/arm/mach-orion5x/irq.c b/arch/arm/mach-orion5x/irq.c index cc2a017fd2a..2545ff9e583 100644 --- a/arch/arm/mach-orion5x/irq.c +++ b/arch/arm/mach-orion5x/irq.c @@ -16,7 +16,7 @@ #include <asm/gpio.h> #include <asm/io.h> #include <mach/orion5x.h> -#include <asm/plat-orion/irq.h> +#include <plat/irq.h> #include "common.h" /***************************************************************************** diff --git a/arch/arm/mach-orion5x/kurobox_pro-setup.c b/arch/arm/mach-orion5x/kurobox_pro-setup.c index 0caaaac74bc..cb72f1bb9cb 100644 --- a/arch/arm/mach-orion5x/kurobox_pro-setup.c +++ b/arch/arm/mach-orion5x/kurobox_pro-setup.c @@ -25,7 +25,7 @@ #include <asm/mach/arch.h> #include <asm/mach/pci.h> #include <mach/orion5x.h> -#include <asm/plat-orion/orion_nand.h> +#include <plat/orion_nand.h> #include "common.h" #include "mpp.h" @@ -356,6 +356,7 @@ static void __init kurobox_pro_init(void) orion5x_sata_init(&kurobox_pro_sata_data); orion5x_uart0_init(); orion5x_uart1_init(); + orion5x_xor_init(); orion5x_setup_dev_boot_win(KUROBOX_PRO_NOR_BOOT_BASE, KUROBOX_PRO_NOR_BOOT_SIZE); diff --git a/arch/arm/mach-orion5x/mss2-setup.c b/arch/arm/mach-orion5x/mss2-setup.c index 4403cc963d6..53ff1893b88 100644 --- a/arch/arm/mach-orion5x/mss2-setup.c +++ b/arch/arm/mach-orion5x/mss2-setup.c @@ -239,6 +239,7 @@ static void __init mss2_init(void) orion5x_i2c_init(); orion5x_sata_init(&mss2_sata_data); orion5x_uart0_init(); + orion5x_xor_init(); orion5x_setup_dev_boot_win(MSS2_NOR_BOOT_BASE, MSS2_NOR_BOOT_SIZE); platform_device_register(&mss2_nor_flash); diff --git a/arch/arm/mach-orion5x/mv2120-setup.c b/arch/arm/mach-orion5x/mv2120-setup.c index 67b2c0df615..978d4d59939 100644 --- a/arch/arm/mach-orion5x/mv2120-setup.c +++ b/arch/arm/mach-orion5x/mv2120-setup.c @@ -203,6 +203,7 @@ static void __init mv2120_init(void) orion5x_i2c_init(); orion5x_sata_init(&mv2120_sata_data); orion5x_uart0_init(); + orion5x_xor_init(); orion5x_setup_dev_boot_win(MV2120_NOR_BOOT_BASE, MV2120_NOR_BOOT_SIZE); platform_device_register(&mv2120_nor_flash); diff --git a/arch/arm/mach-orion5x/pci.c b/arch/arm/mach-orion5x/pci.c index 256a4f68093..fbceecc4b7e 100644 --- a/arch/arm/mach-orion5x/pci.c +++ b/arch/arm/mach-orion5x/pci.c @@ -14,7 +14,7 @@ #include <linux/pci.h> #include <linux/mbus.h> #include <asm/mach/pci.h> -#include <asm/plat-orion/pcie.h> +#include <plat/pcie.h> #include "common.h" /***************************************************************************** diff --git a/arch/arm/mach-orion5x/rd88f5182-setup.c b/arch/arm/mach-orion5x/rd88f5182-setup.c index 8771cb76f0d..4c3bcd76ac8 100644 --- a/arch/arm/mach-orion5x/rd88f5182-setup.c +++ b/arch/arm/mach-orion5x/rd88f5182-setup.c @@ -292,6 +292,7 @@ static void __init rd88f5182_init(void) orion5x_i2c_init(); orion5x_sata_init(&rd88f5182_sata_data); orion5x_uart0_init(); + orion5x_xor_init(); orion5x_setup_dev_boot_win(RD88F5182_NOR_BOOT_BASE, RD88F5182_NOR_BOOT_SIZE); diff --git a/arch/arm/mach-orion5x/ts209-setup.c b/arch/arm/mach-orion5x/ts209-setup.c index 809132de31d..dd657163cd8 100644 --- a/arch/arm/mach-orion5x/ts209-setup.c +++ b/arch/arm/mach-orion5x/ts209-setup.c @@ -207,12 +207,12 @@ static struct i2c_board_info __initdata qnap_ts209_i2c_rtc = { static struct gpio_keys_button qnap_ts209_buttons[] = { { - .code = KEY_RESTART, + .code = KEY_COPY, .gpio = QNAP_TS209_GPIO_KEY_MEDIA, .desc = "USB Copy Button", .active_low = 1, }, { - .code = KEY_POWER, + .code = KEY_RESTART, .gpio = QNAP_TS209_GPIO_KEY_RESET, .desc = "Reset Button", .active_low = 1, @@ -296,6 +296,7 @@ static void __init qnap_ts209_init(void) orion5x_i2c_init(); orion5x_sata_init(&qnap_ts209_sata_data); orion5x_uart0_init(); + orion5x_xor_init(); orion5x_setup_dev_boot_win(QNAP_TS209_NOR_BOOT_BASE, QNAP_TS209_NOR_BOOT_SIZE); diff --git a/arch/arm/mach-orion5x/ts409-setup.c b/arch/arm/mach-orion5x/ts409-setup.c index 6053e76ac96..b27d2b76208 100644 --- a/arch/arm/mach-orion5x/ts409-setup.c +++ b/arch/arm/mach-orion5x/ts409-setup.c @@ -3,6 +3,9 @@ * * Maintainer: Sylver Bruneau <sylver.bruneau@gmail.com> * + * Copyright (C) 2008 Sylver Bruneau <sylver.bruneau@gmail.com> + * Copyright (C) 2008 Martin Michlmayr <tbm@cyrius.com> + * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License * as published by the Free Software Foundation; either version @@ -16,6 +19,7 @@ #include <linux/irq.h> #include <linux/mtd/physmap.h> #include <linux/mv643xx_eth.h> +#include <linux/leds.h> #include <linux/gpio_keys.h> #include <linux/input.h> #include <linux/i2c.h> @@ -162,16 +166,59 @@ static struct i2c_board_info __initdata qnap_ts409_i2c_rtc = { I2C_BOARD_INFO("s35390a", 0x30), }; +/***************************************************************************** + * LEDs attached to GPIO + ****************************************************************************/ + +static struct gpio_led ts409_led_pins[] = { + { + .name = "ts409:red:sata1", + .gpio = 4, + .active_low = 1, + }, { + .name = "ts409:red:sata2", + .gpio = 5, + .active_low = 1, + }, { + .name = "ts409:red:sata3", + .gpio = 6, + .active_low = 1, + }, { + .name = "ts409:red:sata4", + .gpio = 7, + .active_low = 1, + }, +}; + +static struct gpio_led_platform_data ts409_led_data = { + .leds = ts409_led_pins, + .num_leds = ARRAY_SIZE(ts409_led_pins), +}; + +static struct platform_device ts409_leds = { + .name = "leds-gpio", + .id = -1, + .dev = { + .platform_data = &ts409_led_data, + }, +}; + /**************************************************************************** * GPIO Attached Keys * Power button is attached to the PIC microcontroller ****************************************************************************/ +#define QNAP_TS409_GPIO_KEY_RESET 14 #define QNAP_TS409_GPIO_KEY_MEDIA 15 static struct gpio_keys_button qnap_ts409_buttons[] = { { .code = KEY_RESTART, + .gpio = QNAP_TS409_GPIO_KEY_RESET, + .desc = "Reset Button", + .active_low = 1, + }, { + .code = KEY_COPY, .gpio = QNAP_TS409_GPIO_KEY_MEDIA, .desc = "USB Copy Button", .active_low = 1, @@ -255,6 +302,7 @@ static void __init qnap_ts409_init(void) if (qnap_ts409_i2c_rtc.irq == 0) pr_warning("qnap_ts409_init: failed to get RTC IRQ\n"); i2c_register_board_info(0, &qnap_ts409_i2c_rtc, 1); + platform_device_register(&ts409_leds); /* register tsx09 specific power-off method */ pm_power_off = qnap_tsx09_power_off; diff --git a/arch/arm/mach-orion5x/ts78xx-setup.c b/arch/arm/mach-orion5x/ts78xx-setup.c index 014916a28fd..ae0a5dccd2a 100644 --- a/arch/arm/mach-orion5x/ts78xx-setup.c +++ b/arch/arm/mach-orion5x/ts78xx-setup.c @@ -256,6 +256,7 @@ static void __init ts78xx_init(void) orion5x_sata_init(&ts78xx_sata_data); orion5x_uart0_init(); orion5x_uart1_init(); + orion5x_xor_init(); orion5x_setup_dev_boot_win(TS78XX_NOR_BOOT_BASE, TS78XX_NOR_BOOT_SIZE); diff --git a/arch/arm/mach-pxa/include/mach/mtd-xip.h b/arch/arm/mach-pxa/include/mach/mtd-xip.h index 351f32f13ce..4d452fcb150 100644 --- a/arch/arm/mach-pxa/include/mach/mtd-xip.h +++ b/arch/arm/mach-pxa/include/mach/mtd-xip.h @@ -10,8 +10,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $ */ #ifndef __ARCH_PXA_MTD_XIP_H__ diff --git a/arch/arm/mach-pxa/include/mach/poodle.h b/arch/arm/mach-pxa/include/mach/poodle.h index 8956afe8195..67debc47e8c 100644 --- a/arch/arm/mach-pxa/include/mach/poodle.h +++ b/arch/arm/mach-pxa/include/mach/poodle.h @@ -70,6 +70,12 @@ #define POODLE_SCOOP_IO_DIR ( POODLE_SCOOP_VPEN | POODLE_SCOOP_HS_OUT ) #define POODLE_SCOOP_IO_OUT ( 0 ) +#define POODLE_LOCOMO_GPIO_AMP_ON LOCOMO_GPIO(8) +#define POODLE_LOCOMO_GPIO_MUTE_L LOCOMO_GPIO(10) +#define POODLE_LOCOMO_GPIO_MUTE_R LOCOMO_GPIO(11) +#define POODLE_LOCOMO_GPIO_232VCC_ON LOCOMO_GPIO(12) +#define POODLE_LOCOMO_GPIO_JK_B LOCOMO_GPIO(13) + extern struct platform_device poodle_locomo_device; #endif /* __ASM_ARCH_POODLE_H */ diff --git a/arch/arm/mach-pxa/include/mach/pxafb.h b/arch/arm/mach-pxa/include/mach/pxafb.h index 65447549616..8e591118371 100644 --- a/arch/arm/mach-pxa/include/mach/pxafb.h +++ b/arch/arm/mach-pxa/include/mach/pxafb.h @@ -28,6 +28,7 @@ * bits 10-17 : for AC Bias Pin Frequency * bit 18 : for output enable polarity * bit 19 : for pixel clock edge + * bit 20 : for output pixel format when base is RGBT16 */ #define LCD_CONN_TYPE(_x) ((_x) & 0x0f) #define LCD_CONN_WIDTH(_x) (((_x) >> 4) & 0x1f) @@ -53,10 +54,11 @@ #define LCD_SMART_PANEL_18BPP ((18 << 4) | LCD_TYPE_SMART_PANEL) #define LCD_AC_BIAS_FREQ(x) (((x) & 0xff) << 10) -#define LCD_BIAS_ACTIVE_HIGH (0 << 17) -#define LCD_BIAS_ACTIVE_LOW (1 << 17) -#define LCD_PCLK_EDGE_RISE (0 << 18) -#define LCD_PCLK_EDGE_FALL (1 << 18) +#define LCD_BIAS_ACTIVE_HIGH (0 << 18) +#define LCD_BIAS_ACTIVE_LOW (1 << 18) +#define LCD_PCLK_EDGE_RISE (0 << 19) +#define LCD_PCLK_EDGE_FALL (1 << 19) +#define LCD_ALTERNATE_MAPPING (1 << 20) /* * This structure describes the machine which we are running on. diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h index d583688458a..b3f90aa7807 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h @@ -11,7 +11,7 @@ */ #ifndef __ASM_ARM_REGS_CLOCK -#define __ASM_ARM_REGS_CLOCK "$Id: clock.h,v 1.4 2003/04/30 14:50:51 ben Exp $" +#define __ASM_ARM_REGS_CLOCK #define S3C2410_CLKREG(x) ((x) + S3C24XX_VA_CLKPWR) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index 30bec027f5f..528080ceac4 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -12,7 +12,7 @@ #ifndef __ASM_ARCH_REGS_GPIO_H -#define __ASM_ARCH_REGS_GPIO_H "$Id: gpio.h,v 1.5 2003/05/19 12:51:08 ben Exp $" +#define __ASM_ARCH_REGS_GPIO_H #define S3C2410_GPIONO(bank,offset) ((bank) + (offset)) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-irq.h b/arch/arm/mach-s3c2410/include/mach/regs-irq.h index b057c06d167..de86ee8812b 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-irq.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-irq.h @@ -10,7 +10,7 @@ #ifndef ___ASM_ARCH_REGS_IRQ_H -#define ___ASM_ARCH_REGS_IRQ_H "$Id: irq.h,v 1.3 2003/03/25 21:29:06 ben Exp $" +#define ___ASM_ARCH_REGS_IRQ_H /* interrupt controller */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-lcd.h b/arch/arm/mach-s3c2410/include/mach/regs-lcd.h index 893b8742f95..ee8f040aff5 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-lcd.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-lcd.h @@ -10,7 +10,7 @@ #ifndef ___ASM_ARCH_REGS_LCD_H -#define ___ASM_ARCH_REGS_LCD_H "$Id: lcd.h,v 1.3 2003/06/26 13:25:06 ben Exp $" +#define ___ASM_ARCH_REGS_LCD_H #define S3C2410_LCDREG(x) (x) diff --git a/arch/arm/mach-s3c2410/include/mach/regs-mem.h b/arch/arm/mach-s3c2410/include/mach/regs-mem.h index f9926abd5cd..57759804e2f 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-mem.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-mem.h @@ -11,7 +11,7 @@ */ #ifndef __ASM_ARM_MEMREGS_H -#define __ASM_ARM_MEMREGS_H "$Id: regs.h,v 1.8 2003/05/01 15:55:41 ben Exp $" +#define __ASM_ARM_MEMREGS_H #ifndef S3C2410_MEMREG #define S3C2410_MEMREG(x) (S3C24XX_VA_MEMCTRL + (x)) diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index fb1e78e28e5..24c6334fac8 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -562,7 +562,7 @@ static struct platform_device *bast_devices[] __initdata = { &bast_sio, }; -static struct clk *bast_clocks[] = { +static struct clk *bast_clocks[] __initdata = { &s3c24xx_dclk0, &s3c24xx_dclk1, &s3c24xx_clkout0, diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index c9040080727..b88939d7228 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -5,7 +5,6 @@ * Copyright (C) 2004 by FS Forth-Systeme GmbH * All rights reserved. * - * $Id: mach-smdk2410.c,v 1.1 2004/05/11 14:15:38 mpietrek Exp $ * @Author: Jonas Dietsche * * This program is free software; you can redistribute it and/or diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 12cbca68f57..fbc0213d548 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -344,7 +344,7 @@ static struct platform_device *vr1000_devices[] __initdata = { &vr1000_led3, }; -static struct clk *vr1000_clocks[] = { +static struct clk *vr1000_clocks[] __initdata = { &s3c24xx_dclk0, &s3c24xx_dclk1, &s3c24xx_clkout0, diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index 30f613a79bf..4c061d29463 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -26,9 +26,6 @@ #include <linux/spi/spi.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/partitions.h> - #include <asm/mach/arch.h> #include <asm/mach/map.h> #include <asm/mach/irq.h> diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index 265c77dec9d..441f4bc0947 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -414,7 +414,7 @@ static struct platform_device *anubis_devices[] __initdata = { &anubis_device_sm501, }; -static struct clk *anubis_clocks[] = { +static struct clk *anubis_clocks[] __initdata = { &s3c24xx_dclk0, &s3c24xx_dclk1, &s3c24xx_clkout0, diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index d2ee0cd148c..8b83f93b610 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -341,7 +341,7 @@ static struct platform_device *osiris_devices[] __initdata = { &osiris_pcmcia, }; -static struct clk *osiris_clocks[] = { +static struct clk *osiris_clocks[] __initdata = { &s3c24xx_dclk0, &s3c24xx_dclk1, &s3c24xx_clkout0, diff --git a/arch/arm/mach-sa1100/cpu-sa1110.c b/arch/arm/mach-sa1100/cpu-sa1110.c index 39d38c80173..029dbfbbafc 100644 --- a/arch/arm/mach-sa1100/cpu-sa1110.c +++ b/arch/arm/mach-sa1100/cpu-sa1110.c @@ -3,8 +3,6 @@ * * Copyright (C) 2001 Russell King * - * $Id: cpu-sa1110.c,v 1.9 2002/07/06 16:53:18 rmk Exp $ - * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. diff --git a/arch/arm/mach-sa1100/include/mach/mtd-xip.h b/arch/arm/mach-sa1100/include/mach/mtd-xip.h index 80cfdac2b94..eaa09e86ad1 100644 --- a/arch/arm/mach-sa1100/include/mach/mtd-xip.h +++ b/arch/arm/mach-sa1100/include/mach/mtd-xip.h @@ -10,8 +10,6 @@ * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License version 2 as * published by the Free Software Foundation. - * - * $Id: xip.h,v 1.2 2004/12/01 15:49:10 nico Exp $ */ #ifndef __ARCH_SA1100_MTD_XIP_H__ diff --git a/arch/arm/mm/cache-feroceon-l2.c b/arch/arm/mm/cache-feroceon-l2.c index 20eec4ba173..7b5a25d8157 100644 --- a/arch/arm/mm/cache-feroceon-l2.c +++ b/arch/arm/mm/cache-feroceon-l2.c @@ -14,7 +14,7 @@ #include <linux/init.h> #include <asm/cacheflush.h> -#include <asm/plat-orion/cache-feroceon-l2.h> +#include <plat/cache-feroceon-l2.h> /* diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index 2d6d682c206..25d9a11eb61 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -568,6 +568,55 @@ void __init iotable_init(struct map_desc *io_desc, int nr) create_mapping(io_desc + i); } +static int __init check_membank_valid(struct membank *mb) +{ + /* + * Check whether this memory region has non-zero size. + */ + if (mb->size == 0) + return 0; + + /* + * Check whether this memory region would entirely overlap + * the vmalloc area. + */ + if (phys_to_virt(mb->start) >= VMALLOC_MIN) { + printk(KERN_NOTICE "Ignoring RAM at %.8lx-%.8lx " + "(vmalloc region overlap).\n", + mb->start, mb->start + mb->size - 1); + return 0; + } + + /* + * Check whether this memory region would partially overlap + * the vmalloc area. + */ + if (phys_to_virt(mb->start + mb->size) < phys_to_virt(mb->start) || + phys_to_virt(mb->start + mb->size) > VMALLOC_MIN) { + unsigned long newsize = VMALLOC_MIN - phys_to_virt(mb->start); + + printk(KERN_NOTICE "Truncating RAM at %.8lx-%.8lx " + "to -%.8lx (vmalloc region overlap).\n", + mb->start, mb->start + mb->size - 1, + mb->start + newsize - 1); + mb->size = newsize; + } + + return 1; +} + +static void __init sanity_check_meminfo(struct meminfo *mi) +{ + int i; + int j; + + for (i = 0, j = 0; i < mi->nr_banks; i++) { + if (check_membank_valid(&mi->bank[i])) + mi->bank[j++] = mi->bank[i]; + } + mi->nr_banks = j; +} + static inline void prepare_page_table(struct meminfo *mi) { unsigned long addr; @@ -753,6 +802,7 @@ void __init paging_init(struct meminfo *mi, struct machine_desc *mdesc) void *zero_page; build_mem_type_table(); + sanity_check_meminfo(mi); prepare_page_table(mi); bootmem_init(mi); devicemaps_init(mdesc); diff --git a/arch/arm/mm/proc-arm940.S b/arch/arm/mm/proc-arm940.S index 1a3d63df8e9..551244d5ca1 100644 --- a/arch/arm/mm/proc-arm940.S +++ b/arch/arm/mm/proc-arm940.S @@ -15,6 +15,7 @@ #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> #include <asm/ptrace.h> +#include "proc-macros.S" /* ARM940T has a 4KB DCache comprising 256 lines of 4 words */ #define CACHE_DLINESIZE 16 diff --git a/arch/arm/mm/proc-arm946.S b/arch/arm/mm/proc-arm946.S index 82d579ac9b9..6168c6160de 100644 --- a/arch/arm/mm/proc-arm946.S +++ b/arch/arm/mm/proc-arm946.S @@ -17,6 +17,7 @@ #include <asm/pgtable-hwdef.h> #include <asm/pgtable.h> #include <asm/ptrace.h> +#include "proc-macros.S" /* * ARM946E-S is synthesizable to have 0KB to 1MB sized D-Cache, diff --git a/arch/arm/plat-omap/include/mach/memory.h b/arch/arm/plat-omap/include/mach/memory.h index 037486c5f4a..a325caf80d0 100644 --- a/arch/arm/plat-omap/include/mach/memory.h +++ b/arch/arm/plat-omap/include/mach/memory.h @@ -76,13 +76,14 @@ (dma_addr_t)virt_to_lbus(page_address(page)) : \ (dma_addr_t)__virt_to_bus(page_address(page));}) -#define __arch_dma_to_virt(dev, addr) ({is_lbus_device(dev) ? \ - lbus_to_virt(addr) : \ - __bus_to_virt(addr);}) - -#define __arch_virt_to_dma(dev, addr) ({is_lbus_device(dev) ? \ - virt_to_lbus(addr) : \ - __virt_to_bus(addr);}) +#define __arch_dma_to_virt(dev, addr) ({ (void *) (is_lbus_device(dev) ? \ + lbus_to_virt(addr) : \ + __bus_to_virt(addr)); }) + +#define __arch_virt_to_dma(dev, addr) ({ unsigned long __addr = (unsigned long)(addr); \ + (dma_addr_t) (is_lbus_device(dev) ? \ + virt_to_lbus(__addr) : \ + __virt_to_bus(__addr)); }) #endif /* CONFIG_ARCH_OMAP15XX */ diff --git a/include/asm-arm/plat-orion/cache-feroceon-l2.h b/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h index ba4e016d3ec..06f982d5569 100644 --- a/include/asm-arm/plat-orion/cache-feroceon-l2.h +++ b/arch/arm/plat-orion/include/plat/cache-feroceon-l2.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/plat-orion/cache-feroceon-l2.h + * arch/arm/plat-orion/include/plat/cache-feroceon-l2.h * * Copyright (C) 2008 Marvell Semiconductor * diff --git a/include/asm-arm/plat-orion/ehci-orion.h b/arch/arm/plat-orion/include/plat/ehci-orion.h index 785705651e2..64343051095 100644 --- a/include/asm-arm/plat-orion/ehci-orion.h +++ b/arch/arm/plat-orion/include/plat/ehci-orion.h @@ -1,13 +1,13 @@ /* - * include/asm-arm/plat-orion/ehci-orion.h + * arch/arm/plat-orion/include/plat/ehci-orion.h * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#ifndef __ASM_PLAT_ORION_EHCI_ORION_H -#define __ASM_PLAT_ORION_EHCI_ORION_H +#ifndef __PLAT_EHCI_ORION_H +#define __PLAT_EHCI_ORION_H #include <linux/mbus.h> diff --git a/include/asm-arm/plat-orion/irq.h b/arch/arm/plat-orion/include/plat/irq.h index 94aeed919d5..f05eeab9496 100644 --- a/include/asm-arm/plat-orion/irq.h +++ b/arch/arm/plat-orion/include/plat/irq.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/plat-orion/irq.h + * arch/arm/plat-orion/include/plat/irq.h * * Marvell Orion SoC IRQ handling. * @@ -8,8 +8,8 @@ * warranty of any kind, whether express or implied. */ -#ifndef __ASM_PLAT_ORION_IRQ_H -#define __ASM_PLAT_ORION_IRQ_H +#ifndef __PLAT_IRQ_H +#define __PLAT_IRQ_H void orion_irq_init(unsigned int irq_start, void __iomem *maskaddr); diff --git a/include/asm-arm/plat-orion/mv_xor.h b/arch/arm/plat-orion/include/plat/mv_xor.h index c349e8ff5cc..bd5f3bdb4ae 100644 --- a/include/asm-arm/plat-orion/mv_xor.h +++ b/arch/arm/plat-orion/include/plat/mv_xor.h @@ -1,9 +1,11 @@ /* + * arch/arm/plat-orion/include/plat/mv_xor.h + * * Marvell XOR platform device data definition file. */ -#ifndef __ASM_PLAT_ORION_MV_XOR_H -#define __ASM_PLAT_ORION_MV_XOR_H +#ifndef __PLAT_MV_XOR_H +#define __PLAT_MV_XOR_H #include <linux/dmaengine.h> #include <linux/mbus.h> diff --git a/include/asm-arm/plat-orion/orion_nand.h b/arch/arm/plat-orion/include/plat/orion_nand.h index ad4ce94c199..d6a4cfa3778 100644 --- a/include/asm-arm/plat-orion/orion_nand.h +++ b/arch/arm/plat-orion/include/plat/orion_nand.h @@ -1,13 +1,13 @@ /* - * include/asm-arm/plat-orion/orion_nand.h + * arch/arm/plat-orion/include/plat/orion_nand.h * * This file is licensed under the terms of the GNU General Public * License version 2. This program is licensed "as is" without any * warranty of any kind, whether express or implied. */ -#ifndef __ASM_PLAT_ORION_ORION_NAND_H -#define __ASM_PLAT_ORION_ORION_NAND_H +#ifndef __PLAT_ORION_NAND_H +#define __PLAT_ORION_NAND_H /* * Device bus NAND private data diff --git a/include/asm-arm/plat-orion/pcie.h b/arch/arm/plat-orion/include/plat/pcie.h index e61b7bd97af..3ebfef72b4e 100644 --- a/include/asm-arm/plat-orion/pcie.h +++ b/arch/arm/plat-orion/include/plat/pcie.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/plat-orion/pcie.h + * arch/arm/plat-orion/include/plat/pcie.h * * Marvell Orion SoC PCIe handling. * @@ -8,8 +8,8 @@ * warranty of any kind, whether express or implied. */ -#ifndef __ASM_PLAT_ORION_PCIE_H -#define __ASM_PLAT_ORION_PCIE_H +#ifndef __PLAT_PCIE_H +#define __PLAT_PCIE_H u32 orion_pcie_dev_id(void __iomem *base); u32 orion_pcie_rev(void __iomem *base); diff --git a/include/asm-arm/plat-orion/time.h b/arch/arm/plat-orion/include/plat/time.h index 0e85cc8f44d..c06ca35f361 100644 --- a/include/asm-arm/plat-orion/time.h +++ b/arch/arm/plat-orion/include/plat/time.h @@ -1,5 +1,5 @@ /* - * include/asm-arm/plat-orion/time.h + * arch/arm/plat-orion/include/plat/time.h * * Marvell Orion SoC time handling. * @@ -8,8 +8,8 @@ * warranty of any kind, whether express or implied. */ -#ifndef __ASM_PLAT_ORION_TIME_H -#define __ASM_PLAT_ORION_TIME_H +#ifndef __PLAT_TIME_H +#define __PLAT_TIME_H void orion_time_init(unsigned int irq, unsigned int tclk); diff --git a/arch/arm/plat-orion/irq.c b/arch/arm/plat-orion/irq.c index fe66a183516..3f9d34fc738 100644 --- a/arch/arm/plat-orion/irq.c +++ b/arch/arm/plat-orion/irq.c @@ -12,7 +12,7 @@ #include <linux/init.h> #include <linux/irq.h> #include <linux/io.h> -#include <asm/plat-orion/irq.h> +#include <plat/irq.h> static void orion_irq_mask(u32 irq) { diff --git a/arch/arm/plat-orion/pcie.c b/arch/arm/plat-orion/pcie.c index ca32c60e14d..883902fead8 100644 --- a/arch/arm/plat-orion/pcie.c +++ b/arch/arm/plat-orion/pcie.c @@ -12,7 +12,7 @@ #include <linux/pci.h> #include <linux/mbus.h> #include <asm/mach/pci.h> -#include <asm/plat-orion/pcie.h> +#include <plat/pcie.h> /* * PCIe unit register offsets. diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 6d60f0476bb..89ce60eabd5 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -169,9 +169,7 @@ static struct map_desc s3c_iodesc[] __initdata = { IODESC_ENT(UART) }; - -static struct cpu_table * -s3c_lookup_cpu(unsigned long idcode) +static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode) { struct cpu_table *tab; int count; diff --git a/arch/arm/tools/mach-types b/arch/arm/tools/mach-types index 8b8f564c3aa..56281c030a7 100644 --- a/arch/arm/tools/mach-types +++ b/arch/arm/tools/mach-types @@ -12,7 +12,7 @@ # # http://www.arm.linux.org.uk/developer/machines/?action=new # -# Last update: Sun Jul 13 12:04:05 2008 +# Last update: Wed Aug 13 21:56:02 2008 # # machine_is_xxx CONFIG_xxxx MACH_TYPE_xxx number # @@ -843,7 +843,7 @@ borzoi MACH_BORZOI BORZOI 831 gecko MACH_GECKO GECKO 832 ds101 MACH_DS101 DS101 833 omap_palmtt2 MACH_OMAP_PALMTT2 OMAP_PALMTT2 834 -xscale_palmld MACH_XSCALE_PALMLD XSCALE_PALMLD 835 +palmld MACH_PALMLD PALMLD 835 cc9c MACH_CC9C CC9C 836 sbc1670 MACH_SBC1670 SBC1670 837 ixdp28x5 MACH_IXDP28X5 IXDP28X5 838 @@ -852,7 +852,7 @@ ml696k MACH_ML696K ML696K 840 arcom_zeus MACH_ARCOM_ZEUS ARCOM_ZEUS 841 osiris MACH_OSIRIS OSIRIS 842 maestro MACH_MAESTRO MAESTRO 843 -tunge2 MACH_TUNGE2 TUNGE2 844 +palmte2 MACH_PALMTE2 PALMTE2 844 ixbbm MACH_IXBBM IXBBM 845 mx27ads MACH_MX27ADS MX27ADS 846 ax8004 MACH_AX8004 AX8004 847 @@ -916,7 +916,7 @@ nxdb500 MACH_NXDB500 NXDB500 905 apf9328 MACH_APF9328 APF9328 906 omap_wipoq MACH_OMAP_WIPOQ OMAP_WIPOQ 907 omap_twip MACH_OMAP_TWIP OMAP_TWIP 908 -palmtreo650 MACH_PALMTREO650 PALMTREO650 909 +palmt650 MACH_PALMT650 PALMT650 909 acumen MACH_ACUMEN ACUMEN 910 xp100 MACH_XP100 XP100 911 fs2410 MACH_FS2410 FS2410 912 @@ -1096,7 +1096,7 @@ atc6 MACH_ATC6 ATC6 1086 multmdw MACH_MULTMDW MULTMDW 1087 mba2440 MACH_MBA2440 MBA2440 1088 ecsd MACH_ECSD ECSD 1089 -zire31 MACH_ZIRE31 ZIRE31 1090 +palmz31 MACH_PALMZ31 PALMZ31 1090 fsg MACH_FSG FSG 1091 razor101 MACH_RAZOR101 RAZOR101 1092 opera_tdm MACH_OPERA_TDM OPERA_TDM 1093 @@ -1810,7 +1810,7 @@ kriss_sensor MACH_KRISS_SENSOR KRISS_SENSOR 1819 pilz_pmi5 MACH_PILZ_PMI5 PILZ_PMI5 1820 jade MACH_JADE JADE 1821 ks8695_softplc MACH_KS8695_SOFTPLC KS8695_SOFTPLC 1822 -gprisc4 MACH_GPRISC4 GPRISC4 1823 +gprisc3 MACH_GPRISC4 GPRISC4 1823 stamp9260 MACH_STAMP9260 STAMP9260 1824 smdk6430 MACH_SMDK6430 SMDK6430 1825 smdkc100 MACH_SMDKC100 SMDKC100 1826 @@ -1820,3 +1820,44 @@ deister_eyecam MACH_DEISTER_EYECAM DEISTER_EYECAM 1829 at91sam9m10ek MACH_AT91SAM9M10EK AT91SAM9M10EK 1830 linkstation_produo MACH_LINKSTATION_PRODUO LINKSTATION_PRODUO 1831 hit_b0 MACH_HIT_B0 HIT_B0 1832 +adx_rmu MACH_ADX_RMU ADX_RMU 1833 +xg_cpe_main MACH_XG_CPE_MAIN XG_CPE_MAIN 1834 +edb9407a MACH_EDB9407A EDB9407A 1835 +dtb9608 MACH_DTB9608 DTB9608 1836 +em104v1 MACH_EM104V1 EM104V1 1837 +demo MACH_DEMO DEMO 1838 +logi9260 MACH_LOGI9260 LOGI9260 1839 +mx31_exm32 MACH_MX31_EXM32 MX31_EXM32 1840 +usb_a9g20 MACH_USB_A9G20 USB_A9G20 1841 +picproje2008 MACH_PICPROJE2008 PICPROJE2008 1842 +cs_e9315 MACH_CS_E9315 CS_E9315 1843 +qil_a9g20 MACH_QIL_A9G20 QIL_A9G20 1844 +sha_pon020 MACH_SHA_PON020 SHA_PON020 1845 +nad MACH_NAD NAD 1846 +sbc35_a9260 MACH_SBC35_A9260 SBC35_A9260 1847 +sbc35_a9g20 MACH_SBC35_A9G20 SBC35_A9G20 1848 +davinci_beginning MACH_DAVINCI_BEGINNING DAVINCI_BEGINNING 1849 +uwc MACH_UWC UWC 1850 +mxlads MACH_MXLADS MXLADS 1851 +htcnike MACH_HTCNIKE HTCNIKE 1852 +deister_pxa270 MACH_DEISTER_PXA270 DEISTER_PXA270 1853 +cme9210js MACH_CME9210JS CME9210JS 1854 +cc9p9360 MACH_CC9P9360 CC9P9360 1855 +mocha MACH_MOCHA MOCHA 1856 +wapd170ag MACH_WAPD170AG WAPD170AG 1857 +linkstation_mini MACH_LINKSTATION_MINI LINKSTATION_MINI 1858 +afeb9260 MACH_AFEB9260 AFEB9260 1859 +w90x900 MACH_W90X900 W90X900 1860 +w90x700 MACH_W90X700 W90X700 1861 +kt300ip MACH_KT300IP KT300IP 1862 +kt300ip_g20 MACH_KT300IP_G20 KT300IP_G20 1863 +srcm MACH_SRCM SRCM 1864 +wlnx_9260 MACH_WLNX_9260 WLNX_9260 1865 +openmoko_gta03 MACH_OPENMOKO_GTA03 OPENMOKO_GTA03 1866 +osprey2 MACH_OSPREY2 OSPREY2 1867 +kbio9260 MACH_KBIO9260 KBIO9260 1868 +ginza MACH_GINZA GINZA 1869 +a636n MACH_A636N A636N 1870 +imx27ipcam MACH_IMX27IPCAM IMX27IPCAM 1871 +nenoc MACH_NEMOC NEMOC 1872 +geneva MACH_GENEVA GENEVA 1873 diff --git a/arch/blackfin/Kconfig b/arch/blackfin/Kconfig index 5a097c46bc4..f64d25973a3 100644 --- a/arch/blackfin/Kconfig +++ b/arch/blackfin/Kconfig @@ -249,7 +249,7 @@ config MEM_MT48LC8M32B2B5_7 config MEM_MT48LC32M16A2TG_75 bool - depends on (BFIN527_EZKIT || BFIN532_IP0X) + depends on (BFIN527_EZKIT || BFIN532_IP0X || BLACKSTAMP) default y source "arch/blackfin/mach-bf527/Kconfig" @@ -292,7 +292,7 @@ config CLKIN_HZ int "Frequency of the crystal on the board in Hz" default "11059200" if BFIN533_STAMP default "27000000" if BFIN533_EZKIT - default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS) + default "25000000" if (BFIN537_STAMP || BFIN527_EZKIT || H8606_HVSISTEMAS || BLACKSTAMP) default "30000000" if BFIN561_EZKIT default "24576000" if PNAV10 default "10000000" if BFIN532_IP0X @@ -332,7 +332,7 @@ config VCO_MULT default "22" if BFIN533_BLUETECHNIX_CM default "20" if (BFIN537_BLUETECHNIX_CM || BFIN527_BLUETECHNIX_CM || BFIN561_BLUETECHNIX_CM) default "20" if BFIN561_EZKIT - default "16" if H8606_HVSISTEMAS + default "16" if (H8606_HVSISTEMAS || BLACKSTAMP) help This controls the frequency of the on-chip PLL. This can be between 1 and 64. PLL Frequency = (Crystal Frequency) * (this setting) @@ -622,6 +622,33 @@ config CPLB_SWITCH_TAB_L1 If enabled, the CPLB Switch Tables are linked into L1 data memory. (less latency) +comment "Speed Optimizations" +config BFIN_INS_LOWOVERHEAD + bool "ins[bwl] low overhead, higher interrupt latency" + default y + help + Reads on the Blackfin are speculative. In Blackfin terms, this means + they can be interrupted at any time (even after they have been issued + on to the external bus), and re-issued after the interrupt occurs. + For memory - this is not a big deal, since memory does not change if + it sees a read. + + If a FIFO is sitting on the end of the read, it will see two reads, + when the core only sees one since the FIFO receives both the read + which is cancelled (and not delivered to the core) and the one which + is re-issued (which is delivered to the core). + + To solve this, interrupts are turned off before reads occur to + I/O space. This option controls which the overhead/latency of + controlling interrupts during this time + "n" turns interrupts off every read + (higher overhead, but lower interrupt latency) + "y" turns interrupts off every loop + (low overhead, but longer interrupt latency) + + default behavior is to leave this set to on (type "Y"). If you are experiencing + interrupt latency issues, it is safe and OK to turn this off. + endmenu @@ -933,13 +960,6 @@ endchoice comment "Possible Suspend Mem / Hibernate Wake-Up Sources" depends on PM -config PM_BFIN_WAKE_RTC - bool "Allow Wake-Up from RESET and on-chip RTC" - depends on PM - default n - help - Enable RTC Wake-Up (Voltage Regulator Power-Up) - config PM_BFIN_WAKE_PH6 bool "Allow Wake-Up from on-chip PHY or PH6 GP" depends on PM && (BF52x || BF534 || BF536 || BF537) @@ -947,41 +967,12 @@ config PM_BFIN_WAKE_PH6 help Enable PHY and PH6 GP Wake-Up (Voltage Regulator Power-Up) -config PM_BFIN_WAKE_CAN - bool "Allow Wake-Up from on-chip CAN0/1" - depends on PM && (BF54x || BF534 || BF536 || BF537) - default n - help - Enable CAN0/1 Wake-Up (Voltage Regulator Power-Up) - config PM_BFIN_WAKE_GP bool "Allow Wake-Up from GPIOs" depends on PM && BF54x default n help Enable General-Purpose Wake-Up (Voltage Regulator Power-Up) - -config PM_BFIN_WAKE_USB - bool "Allow Wake-Up from on-chip USB" - depends on PM && (BF54x || BF52x) - default n - help - Enable USB Wake-Up (Voltage Regulator Power-Up) - -config PM_BFIN_WAKE_KEYPAD - bool "Allow Wake-Up from on-chip Keypad" - depends on PM && BF54x - default n - help - Enable Keypad Wake-Up (Voltage Regulator Power-Up) - -config PM_BFIN_WAKE_ROTARY - bool "Allow Wake-Up from on-chip Rotary" - depends on PM && BF54x - default n - help - Enable Rotary Wake-Up (Voltage Regulator Power-Up) - endmenu menu "CPU Frequency scaling" diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig new file mode 100644 index 00000000000..2921f9952d5 --- /dev/null +++ b/arch/blackfin/configs/BlackStamp_defconfig @@ -0,0 +1,1195 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.26.2 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_AUDIT is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +# CONFIG_NAMESPACES is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_HAVE_KPROBES is not set +# CONFIG_HAVE_KRETPROBES is not set +# CONFIG_HAVE_DMA_ATTRS is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_CLASSIC_RCU=y +# CONFIG_PREEMPT_NONE is not set +CONFIG_PREEMPT_VOLUNTARY=y +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +CONFIG_BF532=y +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +# CONFIG_BF537 is not set +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +# CONFIG_BF_REV_0_2 is not set +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +CONFIG_BF_REV_0_5=y +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF53x=y +CONFIG_MEM_MT48LC32M16A2TG_75=y +# CONFIG_BFIN533_EZKIT is not set +# CONFIG_BFIN533_STAMP is not set +# CONFIG_BFIN533_BLUETECHNIX_CM is not set +# CONFIG_H8606_HVSISTEMAS is not set +# CONFIG_BFIN532_IP0X is not set +CONFIG_BLACKSTAMP=y +# CONFIG_GENERIC_BF533_BOARD is not set + +# +# BF533/2/1 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_UART_ERROR=7 +CONFIG_SPORT0_ERROR=7 +CONFIG_SPI_ERROR=7 +CONFIG_SPORT1_ERROR=7 +CONFIG_PPI_ERROR=7 +CONFIG_DMA_ERROR=7 +CONFIG_PLLWAKE_ERROR=7 +CONFIG_RTC_ERROR=8 +CONFIG_DMA0_PPI=8 +CONFIG_DMA1_SPORT0RX=9 +CONFIG_DMA2_SPORT0TX=9 +CONFIG_DMA3_SPORT1RX=9 +CONFIG_DMA4_SPORT1TX=9 +CONFIG_DMA5_SPI=10 +CONFIG_DMA6_UARTRX=10 +CONFIG_DMA7_UARTTX=10 +CONFIG_TIMER0=11 +CONFIG_TIMER1=11 +CONFIG_TIMER2=11 +CONFIG_PFA=12 +CONFIG_PFB=12 +CONFIG_MEMDMA0=13 +CONFIG_MEMDMA1=13 +CONFIG_WDTIMER=13 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +# CONFIG_PLL_BYPASS is not set +# CONFIG_CLKIN_HALF is not set +CONFIG_VCO_MULT=16 +CONFIG_CCLK_DIV_1=y +# CONFIG_CCLK_DIV_2 is not set +# CONFIG_CCLK_DIV_4 is not set +# CONFIG_CCLK_DIV_8 is not set +CONFIG_SCLK_DIV=3 +CONFIG_MAX_MEM_SIZE=64 +CONFIG_MAX_VCO_HZ=400000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +# CONFIG_SCHED_HRTICK is not set +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +CONFIG_TICK_ONESHOT=y +# CONFIG_NO_HZ is not set +CONFIG_HIGH_RES_TIMERS=y +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# Memory Setup +# + +# +# Misc +# +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +# CONFIG_IP_CHECKSUM_L1 is not set +CONFIG_CACHELINE_ALIGNED_L1=y +# CONFIG_SYSCALL_TAB_L1 is not set +# CONFIG_CPLB_SWITCH_TAB_L1 is not set +# CONFIG_RAMKERNEL is not set +CONFIG_ROMKERNEL=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +CONFIG_BFIN_GPTIMERS=y +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_4M is not set +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +# CONFIG_BFIN_WB is not set +CONFIG_BFIN_WT=y +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0xAAC2 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +CONFIG_PM_SLEEP=y +CONFIG_SUSPEND=y +CONFIG_SUSPEND_FREEZER=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_PM_BFIN_SLEEP_DEEPER=y +# CONFIG_PM_BFIN_SLEEP is not set +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# Possible Suspend Mem / Hibernate Wake-Up Sources +# + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set +# CONFIG_XFRM_SUB_POLICY is not set +# CONFIG_XFRM_MIGRATE is not set +# CONFIG_XFRM_STATISTICS is not set +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +# CONFIG_IP_PNP_DHCP is not set +# CONFIG_IP_PNP_BOOTP is not set +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +CONFIG_SYN_COOKIES=y +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_INET_XFRM_MODE_TRANSPORT=y +CONFIG_INET_XFRM_MODE_TUNNEL=y +CONFIG_INET_XFRM_MODE_BEET=y +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_NETLABEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_CAN is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_FW_LOADER is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_CONNECTOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y +# CONFIG_MTD_AR7_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=m +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=m +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_GEN_PROBE=m +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=m +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=m +CONFIG_MTD_RAM=y +CONFIG_MTD_ROM=m +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +CONFIG_MTD_COMPLEX_MAPPINGS=y +# CONFIG_MTD_PHYSMAP is not set +# CONFIG_MTD_GPIO_ADDR is not set +# CONFIG_MTD_UCLINUX is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +CONFIG_MTD_M25P80=y +# CONFIG_M25PXX_USE_FAST_READ is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_NBD=y +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +CONFIG_SMC91X=y +# CONFIG_SMSC911X is not set +# CONFIG_DM9000 is not set +# CONFIG_ENC28J60 is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_IWLWIFI_LEDS is not set +# CONFIG_WAN is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +# CONFIG_INPUT_MOUSEDEV is not set +# CONFIG_INPUT_JOYDEV is not set +CONFIG_INPUT_EVDEV=m +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +# CONFIG_INPUT_KEYBOARD is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +CONFIG_BF5xx_PPI=y +CONFIG_BFIN_SPORT=y +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_TWI_LCD is not set +CONFIG_SIMPLE_GPIO=m +# CONFIG_VT is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=m +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=m +CONFIG_I2C_ALGOBIT=m + +# +# I2C Hardware Bus support +# +CONFIG_I2C_GPIO=m +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_SIMTEC is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_PCA_PLATFORM is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_SENSORS_AD5252 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +CONFIG_SPI_AT25=y +CONFIG_SPI_SPIDEV=m +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM70 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set +# CONFIG_HTC_PASIC3 is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +# CONFIG_HID_DEBUG is not set +# CONFIG_HIDRAW is not set +# CONFIG_USB_SUPPORT is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD Host Controller Drivers +# +CONFIG_MMC_SPI=y +# CONFIG_SPI_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_ACCESSIBILITY is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +# CONFIG_RTC_DRV_PCF8563 is not set +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +CONFIG_RTC_DRV_BFIN=y +# CONFIG_UIO is not set + +# +# File systems +# +# CONFIG_EXT2_FS is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_DNOTIFY is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=y +CONFIG_MSDOS_FS=y +CONFIG_VFAT_FS=y +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_YAFFS_FS=m +CONFIG_YAFFS_YAFFS1=y +# CONFIG_YAFFS_9BYTE_TAGS is not set +# CONFIG_YAFFS_DOES_ECC is not set +CONFIG_YAFFS_YAFFS2=y +CONFIG_YAFFS_AUTO_YAFFS2=y +# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set +# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set +# CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED is not set +CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V4=y +# CONFIG_NFSD is not set +# CONFIG_ROOT_NFS is not set +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +CONFIG_SUNRPC_GSS=y +# CONFIG_SUNRPC_BIND34 is not set +CONFIG_RPCSEC_GSS_KRB5=y +# CONFIG_RPCSEC_GSS_SPKM3 is not set +CONFIG_SMB_FS=y +# CONFIG_SMB_NLS_DEFAULT is not set +CONFIG_CIFS=y +# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_WEAK_PW_HASH is not set +# CONFIG_CIFS_XATTR is not set +# CONFIG_CIFS_DEBUG2 is not set +# CONFIG_CIFS_EXPERIMENTAL is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +CONFIG_NLS=y +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=y +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +# CONFIG_NLS_CODEPAGE_850 is not set +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +CONFIG_NLS_ASCII=y +# CONFIG_NLS_ISO8859_1 is not set +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +# CONFIG_NLS_ISO8859_15 is not set +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=y +# CONFIG_DLM is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_MMRS=y +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +CONFIG_EARLY_PRINTK=y +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +# CONFIG_SECURITY_CAPABILITIES is not set +CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 +CONFIG_CRYPTO=y + +# +# Crypto core or helper +# +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_GF128MUL is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_CRYPTD is not set +# CONFIG_CRYPTO_AUTHENC is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Authenticated Encryption with Associated Data +# +# CONFIG_CRYPTO_CCM is not set +# CONFIG_CRYPTO_GCM is not set +# CONFIG_CRYPTO_SEQIV is not set + +# +# Block modes +# +CONFIG_CRYPTO_CBC=y +# CONFIG_CRYPTO_CTR is not set +# CONFIG_CRYPTO_CTS is not set +# CONFIG_CRYPTO_ECB is not set +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_PCBC is not set +# CONFIG_CRYPTO_XTS is not set + +# +# Hash modes +# +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set + +# +# Digest +# +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_WP512 is not set + +# +# Ciphers +# +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_SALSA20 is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_TWOFISH is not set + +# +# Compression +# +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_LZO is not set +CONFIG_CRYPTO_HW=y + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_GENERIC_FIND_FIRST_BIT is not set +CONFIG_CRC_CCITT=m +# CONFIG_CRC16 is not set +CONFIG_CRC_ITU_T=y +CONFIG_CRC32=y +CONFIG_CRC7=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig new file mode 100644 index 00000000000..c482ee171f9 --- /dev/null +++ b/arch/blackfin/configs/TCM-BF537_defconfig @@ -0,0 +1,693 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24.7 +# Thu Jul 31 00:53:15 2008 +# +# CONFIG_MMU is not set +# CONFIG_FPU is not set +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +CONFIG_BLACKFIN=y +CONFIG_ZONE_DMA=y +CONFIG_SEMAPHORE_SLEEPERS=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_GENERIC_GPIO=y +CONFIG_FORCE_MAX_ZONEORDER=14 +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_IKCONFIG=y +CONFIG_IKCONFIG_PROC=y +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +# CONFIG_UID16 is not set +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_HOTPLUG is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +CONFIG_TINY_SHMEM=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +# CONFIG_LBD is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +# CONFIG_IOSCHED_AS is not set +# CONFIG_IOSCHED_DEADLINE is not set +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_NOOP=y +CONFIG_DEFAULT_IOSCHED="noop" +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set + +# +# Blackfin Processor Options +# + +# +# Processor and Board Settings +# +# CONFIG_BF522 is not set +# CONFIG_BF523 is not set +# CONFIG_BF524 is not set +# CONFIG_BF525 is not set +# CONFIG_BF526 is not set +# CONFIG_BF527 is not set +# CONFIG_BF531 is not set +# CONFIG_BF532 is not set +# CONFIG_BF533 is not set +# CONFIG_BF534 is not set +# CONFIG_BF536 is not set +CONFIG_BF537=y +# CONFIG_BF542 is not set +# CONFIG_BF544 is not set +# CONFIG_BF547 is not set +# CONFIG_BF548 is not set +# CONFIG_BF549 is not set +# CONFIG_BF561 is not set +# CONFIG_BF_REV_0_0 is not set +# CONFIG_BF_REV_0_1 is not set +CONFIG_BF_REV_0_2=y +# CONFIG_BF_REV_0_3 is not set +# CONFIG_BF_REV_0_4 is not set +# CONFIG_BF_REV_0_5 is not set +# CONFIG_BF_REV_ANY is not set +# CONFIG_BF_REV_NONE is not set +CONFIG_BF53x=y +CONFIG_IRQ_PLL_WAKEUP=7 +CONFIG_IRQ_RTC=8 +CONFIG_IRQ_PPI=8 +CONFIG_IRQ_SPORT0_RX=9 +CONFIG_IRQ_SPORT0_TX=9 +CONFIG_IRQ_SPORT1_RX=9 +CONFIG_IRQ_SPORT1_TX=9 +CONFIG_IRQ_TWI=10 +CONFIG_IRQ_SPI=10 +CONFIG_IRQ_UART0_RX=10 +CONFIG_IRQ_UART0_TX=10 +CONFIG_IRQ_UART1_RX=10 +CONFIG_IRQ_UART1_TX=10 +CONFIG_IRQ_MAC_RX=11 +CONFIG_IRQ_MAC_TX=11 +CONFIG_IRQ_TMR0=12 +CONFIG_IRQ_TMR1=12 +CONFIG_IRQ_TMR2=12 +CONFIG_IRQ_TMR3=12 +CONFIG_IRQ_TMR4=12 +CONFIG_IRQ_TMR5=12 +CONFIG_IRQ_TMR6=12 +CONFIG_IRQ_TMR7=12 +CONFIG_IRQ_PORTG_INTB=12 +CONFIG_IRQ_MEM_DMA0=13 +CONFIG_IRQ_MEM_DMA1=13 +CONFIG_IRQ_WATCH=13 +# CONFIG_BFIN537_STAMP is not set +# CONFIG_BFIN537_BLUETECHNIX_CM is not set +CONFIG_BFIN537_BLUETECHNIX_TCM=y +# CONFIG_PNAV10 is not set +# CONFIG_CAMSIG_MINOTAUR is not set +# CONFIG_GENERIC_BF537_BOARD is not set + +# +# BF537 Specific Configuration +# + +# +# Interrupt Priority Assignment +# + +# +# Priority +# +CONFIG_IRQ_DMA_ERROR=7 +CONFIG_IRQ_ERROR=7 +CONFIG_IRQ_CAN_RX=11 +CONFIG_IRQ_CAN_TX=11 +CONFIG_IRQ_PROG_INTA=12 + +# +# Board customizations +# +# CONFIG_CMDLINE_BOOL is not set +CONFIG_BOOT_LOAD=0x1000 + +# +# Clock/PLL Setup +# +CONFIG_CLKIN_HZ=25000000 +# CONFIG_BFIN_KERNEL_CLOCK is not set +CONFIG_MAX_MEM_SIZE=32 +CONFIG_MAX_VCO_HZ=600000000 +CONFIG_MIN_VCO_HZ=50000000 +CONFIG_MAX_SCLK_HZ=133333333 +CONFIG_MIN_SCLK_HZ=27000000 + +# +# Kernel Timer/Scheduler +# +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_CYCLES_CLOCKSOURCE is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y + +# +# Misc +# +CONFIG_BFIN_SCRATCH_REG_RETN=y +# CONFIG_BFIN_SCRATCH_REG_RETE is not set +# CONFIG_BFIN_SCRATCH_REG_CYCLES is not set + +# +# Blackfin Kernel Optimizations +# + +# +# Memory Optimizations +# +CONFIG_I_ENTRY_L1=y +CONFIG_EXCPT_IRQ_SYSC_L1=y +CONFIG_DO_IRQ_L1=y +CONFIG_CORE_TIMER_IRQ_L1=y +CONFIG_IDLE_L1=y +CONFIG_SCHEDULE_L1=y +CONFIG_ARITHMETIC_OPS_L1=y +CONFIG_ACCESS_OK_L1=y +CONFIG_MEMSET_L1=y +CONFIG_MEMCPY_L1=y +CONFIG_SYS_BFIN_SPINLOCK_L1=y +CONFIG_IP_CHECKSUM_L1=y +CONFIG_CACHELINE_ALIGNED_L1=y +CONFIG_SYSCALL_TAB_L1=y +CONFIG_CPLB_SWITCH_TAB_L1=y +CONFIG_RAMKERNEL=y +# CONFIG_ROMKERNEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y +# CONFIG_BFIN_GPTIMERS is not set +CONFIG_BFIN_DMA_5XX=y +# CONFIG_DMA_UNCACHED_4M is not set +# CONFIG_DMA_UNCACHED_2M is not set +CONFIG_DMA_UNCACHED_1M=y +# CONFIG_DMA_UNCACHED_NONE is not set + +# +# Cache Support +# +CONFIG_BFIN_ICACHE=y +CONFIG_BFIN_DCACHE=y +# CONFIG_BFIN_DCACHE_BANKA is not set +# CONFIG_BFIN_ICACHE_LOCK is not set +CONFIG_BFIN_WB=y +# CONFIG_BFIN_WT is not set +# CONFIG_MPU is not set + +# +# Asynchonous Memory Configuration +# + +# +# EBIU_AMGCTL Global Control +# +CONFIG_C_AMCKEN=y +CONFIG_C_CDPRIO=y +# CONFIG_C_AMBEN is not set +# CONFIG_C_AMBEN_B0 is not set +# CONFIG_C_AMBEN_B0_B1 is not set +# CONFIG_C_AMBEN_B0_B1_B2 is not set +CONFIG_C_AMBEN_ALL=y + +# +# EBIU_AMBCTL Control +# +CONFIG_BANK_0=0x7BB0 +CONFIG_BANK_1=0x7BB0 +CONFIG_BANK_2=0x7BB0 +CONFIG_BANK_3=0xFFC2 + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +# CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF_FDPIC=y +CONFIG_BINFMT_FLAT=y +CONFIG_BINFMT_ZFLAT=y +CONFIG_BINFMT_SHARED_FLAT=y +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +# CONFIG_PM_WAKEUP_BY_GPIO is not set + +# +# CPU Frequency scaling +# +# CONFIG_CPU_FREQ is not set + +# +# Networking +# +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_RAM=y +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_GPIO_ADDR is not set +CONFIG_MTD_UCLINUX=y +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_AD9960 is not set +# CONFIG_SPI_ADC_BF533 is not set +# CONFIG_BF5xx_PPIFCD is not set +# CONFIG_BFIN_SIMPLE_TIMER is not set +# CONFIG_BF5xx_PPI is not set +CONFIG_BFIN_SPORT=y +# CONFIG_BFIN_TIMER_LATENCY is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +# CONFIG_SERIAL_8250 is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_BFIN=y +CONFIG_SERIAL_BFIN_CONSOLE=y +CONFIG_SERIAL_BFIN_DMA=y +# CONFIG_SERIAL_BFIN_PIO is not set +CONFIG_SERIAL_BFIN_UART0=y +# CONFIG_BFIN_UART0_CTSRTS is not set +CONFIG_SERIAL_BFIN_UART1=y +# CONFIG_BFIN_UART1_CTSRTS is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_BFIN_SPORT is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# CAN, the car bus and industrial fieldbus +# +# CONFIG_CAN4LINUX is not set +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +# CONFIG_I2C is not set + +# +# SPI support +# +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BFIN=y +# CONFIG_SPI_BITBANG is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set + +# +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_BFIN_WDT=y + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +CONFIG_EXT2_FS_XATTR=y +# CONFIG_EXT2_FS_POSIX_ACL is not set +# CONFIG_EXT2_FS_SECURITY is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_DNOTIFY is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +# CONFIG_TMPFS is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_YAFFS_FS is not set +# CONFIG_JFFS2_FS is not set +# CONFIG_CRAMFS is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_INSTRUMENTATION is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +# CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +CONFIG_DEBUG_FS=y +# CONFIG_HEADERS_CHECK is not set +# CONFIG_DEBUG_KERNEL is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_SAMPLES is not set +CONFIG_DEBUG_MMRS=y +CONFIG_DEBUG_HUNT_FOR_ZERO=y +CONFIG_DEBUG_BFIN_HWTRACE_ON=y +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_OFF=y +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_ONE is not set +# CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION_TWO is not set +CONFIG_DEBUG_BFIN_HWTRACE_COMPRESSION=0 +# CONFIG_DEBUG_BFIN_HWTRACE_EXPAND is not set +# CONFIG_DEBUG_BFIN_NO_KERN_HWTRACE is not set +# CONFIG_EARLY_PRINTK is not set +CONFIG_CPLB_INFO=y +CONFIG_ACCESS_CHECK=y + +# +# Security options +# +# CONFIG_KEYS is not set +CONFIG_SECURITY=y +# CONFIG_SECURITY_NETWORK is not set +CONFIG_SECURITY_CAPABILITIES=y +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +# CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y diff --git a/arch/blackfin/kernel/cplb-mpu/cacheinit.c b/arch/blackfin/kernel/cplb-mpu/cacheinit.c index 9eecfa40318..a8b712a24c5 100644 --- a/arch/blackfin/kernel/cplb-mpu/cacheinit.c +++ b/arch/blackfin/kernel/cplb-mpu/cacheinit.c @@ -25,7 +25,7 @@ #include <asm/cplbinit.h> #if defined(CONFIG_BFIN_ICACHE) -void bfin_icache_init(void) +void __init bfin_icache_init(void) { unsigned long ctrl; int i; @@ -43,7 +43,7 @@ void bfin_icache_init(void) #endif #if defined(CONFIG_BFIN_DCACHE) -void bfin_dcache_init(void) +void __init bfin_dcache_init(void) { unsigned long ctrl; int i; diff --git a/arch/blackfin/kernel/cplb-nompu/cacheinit.c b/arch/blackfin/kernel/cplb-nompu/cacheinit.c index 8a18399f607..bd0831592c2 100644 --- a/arch/blackfin/kernel/cplb-nompu/cacheinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cacheinit.c @@ -25,7 +25,7 @@ #include <asm/cplbinit.h> #if defined(CONFIG_BFIN_ICACHE) -void bfin_icache_init(void) +void __init bfin_icache_init(void) { unsigned long *table = icplb_table; unsigned long ctrl; @@ -47,7 +47,7 @@ void bfin_icache_init(void) #endif #if defined(CONFIG_BFIN_DCACHE) -void bfin_dcache_init(void) +void __init bfin_dcache_init(void) { unsigned long *table = dcplb_table; unsigned long ctrl; diff --git a/arch/blackfin/kernel/cplb-nompu/cplbinit.c b/arch/blackfin/kernel/cplb-nompu/cplbinit.c index 224e7cc30bc..728f708d398 100644 --- a/arch/blackfin/kernel/cplb-nompu/cplbinit.c +++ b/arch/blackfin/kernel/cplb-nompu/cplbinit.c @@ -164,17 +164,13 @@ static struct cplb_desc cplb_data[] = { .name = "Asynchronous Memory Banks", }, { -#ifdef L2_START .start = L2_START, .end = L2_START + L2_LENGTH, .psize = SIZE_1M, .attr = SWITCH_T | I_CPLB | D_CPLB, .i_conf = L2_MEMORY, .d_conf = L2_MEMORY, - .valid = 1, -#else - .valid = 0, -#endif + .valid = (L2_LENGTH > 0), .name = "L2 Memory", }, { diff --git a/arch/blackfin/kernel/setup.c b/arch/blackfin/kernel/setup.c index 23e637eb78d..7a82d10b4eb 100644 --- a/arch/blackfin/kernel/setup.c +++ b/arch/blackfin/kernel/setup.c @@ -52,6 +52,7 @@ EXPORT_SYMBOL(mtd_size); #endif char __initdata command_line[COMMAND_LINE_SIZE]; +unsigned int __initdata *__retx; /* boot memmap, for parsing "memmap=" */ #define BFIN_MEMMAP_MAX 128 /* number of entries in bfin_memmap */ @@ -131,14 +132,14 @@ void __init bf53x_relocate_l1_mem(void) dma_memcpy(_sdata_b_l1, _l1_lma_start + l1_code_length + l1_data_a_length, l1_data_b_length); -#ifdef L2_LENGTH - l2_length = _ebss_l2 - _stext_l2; - if (l2_length > L2_LENGTH) - panic("L2 SRAM Overflow\n"); + if (L2_LENGTH != 0) { + l2_length = _ebss_l2 - _stext_l2; + if (l2_length > L2_LENGTH) + panic("L2 SRAM Overflow\n"); - /* Copy _stext_l2 to _edata_l2 to L2 SRAM */ - dma_memcpy(_stext_l2, _l2_lma_start, l2_length); -#endif + /* Copy _stext_l2 to _edata_l2 to L2 SRAM */ + dma_memcpy(_stext_l2, _l2_lma_start, l2_length); + } } /* add_memory_region to memmap */ @@ -738,6 +739,16 @@ void __init setup_arch(char **cmdline_p) memory_setup(); + /* Initialize Async memory banks */ + bfin_write_EBIU_AMBCTL0(AMBCTL0VAL); + bfin_write_EBIU_AMBCTL1(AMBCTL1VAL); + bfin_write_EBIU_AMGCTL(AMGCTLVAL); +#ifdef CONFIG_EBIU_MBSCTLVAL + bfin_write_EBIU_MBSCTL(CONFIG_EBIU_MBSCTLVAL); + bfin_write_EBIU_MODE(CONFIG_EBIU_MODEVAL); + bfin_write_EBIU_FCTL(CONFIG_EBIU_FCTLVAL); +#endif + cclk = get_cclk(); sclk = get_sclk(); @@ -775,7 +786,11 @@ void __init setup_arch(char **cmdline_p) bfin_write_SWRST(DOUBLE_FAULT); if (_bfin_swrst & RESET_DOUBLE) - printk(KERN_INFO "Recovering from Double Fault event\n"); + /* + * don't decode the address, since you don't know if this + * kernel's symbol map is the same as the crashing kernel + */ + printk(KERN_INFO "Recovering from Double Fault event at %pF\n", __retx); else if (_bfin_swrst & RESET_WDOG) printk(KERN_INFO "Recovering from Watchdog event\n"); else if (_bfin_swrst & RESET_SOFTWARE) @@ -1049,7 +1064,7 @@ static int show_cpuinfo(struct seq_file *m, void *v) dsup_banks, BFIN_DSUBBANKS, BFIN_DWAYS, BFIN_DLINES); #ifdef CONFIG_BFIN_ICACHE_LOCK - switch (read_iloc()) { + switch ((bfin_read_IMEM_CONTROL() >> 3) & WAYALL_L) { case WAY0_L: seq_printf(m, "Way0 Locked-Down\n"); break; diff --git a/arch/blackfin/kernel/traps.c b/arch/blackfin/kernel/traps.c index ad922ab9154..9a9d5083acf 100644 --- a/arch/blackfin/kernel/traps.c +++ b/arch/blackfin/kernel/traps.c @@ -567,7 +567,7 @@ bool get_instruction(unsigned short *val, unsigned short *address) * we don't read something in the async space that can hang forever */ if ((addr >= FIXED_CODE_START && (addr + 2) <= physical_mem_end) || -#ifdef L2_START +#if L2_LENGTH != 0 (addr >= L2_START && (addr + 2) <= (L2_START + L2_LENGTH)) || #endif (addr >= BOOT_ROM_START && (addr + 2) <= (BOOT_ROM_START + BOOT_ROM_LENGTH)) || @@ -601,12 +601,55 @@ bool get_instruction(unsigned short *val, unsigned short *address) return false; } +/* + * decode the instruction if we are printing out the trace, as it + * makes things easier to follow, without running it through objdump + * These are the normal instructions which cause change of flow, which + * would be at the source of the trace buffer + */ +void decode_instruction(unsigned short *address) +{ + unsigned short opcode; + + if (get_instruction(&opcode, address)) { + if (opcode == 0x0010) + printk("RTS"); + else if (opcode == 0x0011) + printk("RTI"); + else if (opcode == 0x0012) + printk("RTX"); + else if (opcode >= 0x0050 && opcode <= 0x0057) + printk("JUMP (P%i)", opcode & 7); + else if (opcode >= 0x0060 && opcode <= 0x0067) + printk("CALL (P%i)", opcode & 7); + else if (opcode >= 0x0070 && opcode <= 0x0077) + printk("CALL (PC+P%i)", opcode & 7); + else if (opcode >= 0x0080 && opcode <= 0x0087) + printk("JUMP (PC+P%i)", opcode & 7); + else if ((opcode >= 0x1000 && opcode <= 0x13FF) || (opcode >= 0x1800 && opcode <= 0x1BFF)) + printk("IF !CC JUMP"); + else if ((opcode >= 0x1400 && opcode <= 0x17ff) || (opcode >= 0x1c00 && opcode <= 0x1fff)) + printk("IF CC JUMP"); + else if (opcode >= 0x2000 && opcode <= 0x2fff) + printk("JUMP.S"); + else if (opcode >= 0xe080 && opcode <= 0xe0ff) + printk("LSETUP"); + else if (opcode >= 0xe200 && opcode <= 0xe2ff) + printk("JUMP.L"); + else if (opcode >= 0xe300 && opcode <= 0xe3ff) + printk("CALL pcrel"); + else + printk("0x%04x", opcode); + } + +} + void dump_bfin_trace_buffer(void) { #ifdef CONFIG_DEBUG_BFIN_HWTRACE_ON int tflags, i = 0; char buf[150]; - unsigned short val = 0, *addr; + unsigned short *addr; #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND int j, index; #endif @@ -615,6 +658,10 @@ void dump_bfin_trace_buffer(void) printk(KERN_NOTICE "Hardware Trace:\n"); +#ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND + printk(KERN_NOTICE "WARNING: Expanded trace turned on - can not trace exceptions\n"); +#endif + if (likely(bfin_read_TBUFSTAT() & TBUFCNT)) { for (; bfin_read_TBUFSTAT() & TBUFCNT; i++) { decode_address(buf, (unsigned long)bfin_read_TBUF()); @@ -622,45 +669,14 @@ void dump_bfin_trace_buffer(void) addr = (unsigned short *)bfin_read_TBUF(); decode_address(buf, (unsigned long)addr); printk(KERN_NOTICE " Source : %s ", buf); - if (get_instruction(&val, addr)) { - if (val == 0x0010) - printk("RTS"); - else if (val == 0x0011) - printk("RTI"); - else if (val == 0x0012) - printk("RTX"); - else if (val >= 0x0050 && val <= 0x0057) - printk("JUMP (P%i)", val & 7); - else if (val >= 0x0060 && val <= 0x0067) - printk("CALL (P%i)", val & 7); - else if (val >= 0x0070 && val <= 0x0077) - printk("CALL (PC+P%i)", val & 7); - else if (val >= 0x0080 && val <= 0x0087) - printk("JUMP (PC+P%i)", val & 7); - else if ((val >= 0x1000 && val <= 0x13FF) || - (val >= 0x1800 && val <= 0x1BFF)) - printk("IF !CC JUMP"); - else if ((val >= 0x1400 && val <= 0x17ff) || - (val >= 0x1c00 && val <= 0x1fff)) - printk("IF CC JUMP"); - else if (val >= 0x2000 && val <= 0x2fff) - printk("JUMP.S"); - else if (val >= 0xe080 && val <= 0xe0ff) - printk("LSETUP"); - else if (val >= 0xe200 && val <= 0xe2ff) - printk("JUMP.L"); - else if (val >= 0xe300 && val <= 0xe3ff) - printk("CALL pcrel"); - else - printk("0x%04x", val); - } + decode_instruction(addr); printk("\n"); } } #ifdef CONFIG_DEBUG_BFIN_HWTRACE_EXPAND if (trace_buff_offset) - index = trace_buff_offset/4 - 1; + index = trace_buff_offset / 4; else index = EXPAND_LEN; @@ -672,7 +688,9 @@ void dump_bfin_trace_buffer(void) if (index < 0 ) index = EXPAND_LEN; decode_address(buf, software_trace_buff[index]); - printk(KERN_NOTICE " Source : %s\n", buf); + printk(KERN_NOTICE " Source : %s ", buf); + decode_instruction((unsigned short *)software_trace_buff[index]); + printk("\n"); index -= 1; if (index < 0) index = EXPAND_LEN; diff --git a/arch/blackfin/kernel/vmlinux.lds.S b/arch/blackfin/kernel/vmlinux.lds.S index 0896e38d610..7d12c6692a6 100644 --- a/arch/blackfin/kernel/vmlinux.lds.S +++ b/arch/blackfin/kernel/vmlinux.lds.S @@ -83,6 +83,7 @@ SECTIONS #if !L1_DATA_B_LENGTH *(.l1.bss.B) #endif + . = ALIGN(4); ___bss_stop = .; } @@ -101,7 +102,7 @@ SECTIONS #if !L1_DATA_B_LENGTH *(.l1.data.B) #endif -#ifndef L2_LENGTH +#if !L2_LENGTH . = ALIGN(32); *(.data_l2.cacheline_aligned) *(.l2.data) @@ -211,20 +212,19 @@ SECTIONS __ebss_b_l1 = .; } -#ifdef L2_LENGTH __l2_lma_start = .; .text_data_l2 L2_START : AT(LOADADDR(.data_b_l1) + SIZEOF(.data_b_l1)) { . = ALIGN(4); __stext_l2 = .; - *(.l1.text) + *(.l2.text) . = ALIGN(4); __etext_l2 = .; . = ALIGN(4); __sdata_l2 = .; - *(.l1.data) + *(.l2.data) __edata_l2 = .; . = ALIGN(32); @@ -232,11 +232,10 @@ SECTIONS . = ALIGN(4); __sbss_l2 = .; - *(.l1.bss) + *(.l2.bss) . = ALIGN(4); __ebss_l2 = .; } -#endif /* Force trailing alignment of our init section so that when we * free our init memory, we don't leave behind a partial page. diff --git a/arch/blackfin/lib/ins.S b/arch/blackfin/lib/ins.S index eba2343b1b5..d60554dce87 100644 --- a/arch/blackfin/lib/ins.S +++ b/arch/blackfin/lib/ins.S @@ -33,7 +33,28 @@ .align 2 +/* + * Reads on the Blackfin are speculative. In Blackfin terms, this means they + * can be interrupted at any time (even after they have been issued on to the + * external bus), and re-issued after the interrupt occurs. + * + * If a FIFO is sitting on the end of the read, it will see two reads, + * when the core only sees one. The FIFO receives the read which is cancelled, + * and not delivered to the core. + * + * To solve this, interrupts are turned off before reads occur to I/O space. + * There are 3 versions of all these functions + * - turns interrupts off every read (higher overhead, but lower latency) + * - turns interrupts off every loop (low overhead, but longer latency) + * - DMA version, which do not suffer from this issue. DMA versions have + * different name (prefixed by dma_ ), and are located in + * ../kernel/bfin_dma_5xx.c + * Using the dma related functions are recommended for transfering large + * buffers in/out of FIFOs. + */ + ENTRY(_insl) +#ifdef CONFIG_BFIN_INS_LOWOVERHEAD P0 = R0; /* P0 = port */ cli R3; P1 = R1; /* P1 = address */ @@ -46,9 +67,26 @@ ENTRY(_insl) .Llong_loop_e: NOP; sti R3; RTS; +#else + P0 = R0; /* P0 = port */ + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + SSYNC; + LSETUP( .Llong_loop_s, .Llong_loop_e) LC0 = P2; +.Llong_loop_s: + CLI R3; + NOP; NOP; NOP; + R0 = [P0]; + [P1++] = R0; +.Llong_loop_e: + STI R3; + + RTS; +#endif ENDPROC(_insl) ENTRY(_insw) +#ifdef CONFIG_BFIN_INS_LOWOVERHEAD P0 = R0; /* P0 = port */ cli R3; P1 = R1; /* P1 = address */ @@ -61,9 +99,26 @@ ENTRY(_insw) .Lword_loop_e: NOP; sti R3; RTS; +#else + P0 = R0; /* P0 = port */ + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + SSYNC; + LSETUP( .Lword_loop_s, .Lword_loop_e) LC0 = P2; +.Lword_loop_s: + CLI R3; + NOP; NOP; NOP; + R0 = W[P0]; + W[P1++] = R0; +.Lword_loop_e: + STI R3; + RTS; + +#endif ENDPROC(_insw) ENTRY(_insw_8) +#ifdef CONFIG_BFIN_INS_LOWOVERHEAD P0 = R0; /* P0 = port */ cli R3; P1 = R1; /* P1 = address */ @@ -78,9 +133,29 @@ ENTRY(_insw_8) .Lword8_loop_e: NOP; sti R3; RTS; +#else + P0 = R0; /* P0 = port */ + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + SSYNC; + LSETUP( .Lword8_loop_s, .Lword8_loop_e) LC0 = P2; +.Lword8_loop_s: + CLI R3; + NOP; NOP; NOP; + R0 = W[P0]; + B[P1++] = R0; + R0 = R0 >> 8; + B[P1++] = R0; + NOP; +.Lword8_loop_e: + STI R3; + + RTS; +#endif ENDPROC(_insw_8) ENTRY(_insb) +#ifdef CONFIG_BFIN_INS_LOWOVERHEAD P0 = R0; /* P0 = port */ cli R3; P1 = R1; /* P1 = address */ @@ -93,9 +168,26 @@ ENTRY(_insb) .Lbyte_loop_e: NOP; sti R3; RTS; +#else + P0 = R0; /* P0 = port */ + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + SSYNC; + LSETUP( .Lbyte_loop_s, .Lbyte_loop_e) LC0 = P2; +.Lbyte_loop_s: + CLI R3; + NOP; NOP; NOP; + R0 = B[P0]; + B[P1++] = R0; +.Lbyte_loop_e: + STI R3; + + RTS; +#endif ENDPROC(_insb) ENTRY(_insl_16) +#ifdef CONFIG_BFIN_INS_LOWOVERHEAD P0 = R0; /* P0 = port */ cli R3; P1 = R1; /* P1 = address */ @@ -110,4 +202,21 @@ ENTRY(_insl_16) .Llong16_loop_e: NOP; sti R3; RTS; +#else + P0 = R0; /* P0 = port */ + P1 = R1; /* P1 = address */ + P2 = R2; /* P2 = count */ + SSYNC; + LSETUP( .Llong16_loop_s, .Llong16_loop_e) LC0 = P2; +.Llong16_loop_s: + CLI R3; + NOP; NOP; NOP; + R0 = [P0]; + W[P1++] = R0; + R0 = R0 >> 16; + W[P1++] = R0; +.Llong16_loop_e: + STI R3; + RTS; +#endif ENDPROC(_insl_16) diff --git a/arch/blackfin/mach-bf527/boards/cm_bf527.c b/arch/blackfin/mach-bf527/boards/cm_bf527.c index 0b26ae2de5e..d22bc777371 100644 --- a/arch/blackfin/mach-bf527/boards/cm_bf527.c +++ b/arch/blackfin/mach-bf527/boards/cm_bf527.c @@ -39,7 +39,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif -#include <linux/pata_platform.h> #include <linux/i2c.h> #include <linux/irq.h> #include <linux/interrupt.h> @@ -160,15 +159,15 @@ static struct platform_device musb_device = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition ezkit_partitions[] = { { - .name = "Bootloader", + .name = "bootloader(nor)", .size = 0x40000, .offset = 0, }, { - .name = "Kernel", + .name = "linux kernel(nor)", .size = 0x1C0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "RootFS", + .name = "file system(nor)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -200,12 +199,12 @@ static struct platform_device ezkit_flash_device = { #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) static struct mtd_partition partition_info[] = { { - .name = "Linux Kernel", + .name = "linux kernel(nand)", .offset = 0, .size = 4 * SIZE_1M, }, { - .name = "File System", + .name = "file system(nand)", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, }, @@ -438,12 +437,12 @@ static struct platform_device net2272_bfin_device = { || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "linux kernel", + .name = "linux kernel(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -799,43 +798,6 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -961,10 +923,6 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport1_uart_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif @@ -987,10 +945,6 @@ static int __init stamp_init(void) platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf527/boards/ezkit.c b/arch/blackfin/mach-bf527/boards/ezkit.c index 689b69c98ee..762f754c06c 100644 --- a/arch/blackfin/mach-bf527/boards/ezkit.c +++ b/arch/blackfin/mach-bf527/boards/ezkit.c @@ -38,7 +38,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif -#include <linux/ata_platform.h> #include <linux/i2c.h> #include <linux/irq.h> #include <linux/interrupt.h> @@ -177,15 +176,15 @@ static struct platform_device bf52x_t350mcqb_device = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition ezkit_partitions[] = { { - .name = "Bootloader", + .name = "bootloader(nor)", .size = 0x40000, .offset = 0, }, { - .name = "Kernel", + .name = "linux kernel(nor)", .size = 0x1C0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "RootFS", + .name = "file system(nor)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -217,12 +216,12 @@ static struct platform_device ezkit_flash_device = { #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) static struct mtd_partition partition_info[] = { { - .name = "Linux Kernel", + .name = "linux kernel(nand)", .offset = 0, .size = 4 * SIZE_1M, }, { - .name = "File System", + .name = "file system(nand)", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, }, @@ -460,12 +459,12 @@ static struct platform_device net2272_bfin_device = { || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "linux kernel", + .name = "linux kernel(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -825,43 +824,6 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -996,10 +958,6 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport1_uart_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif @@ -1022,10 +980,6 @@ static int __init stamp_init(void) platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf527/head.S b/arch/blackfin/mach-bf527/head.S index fe05cc1ef17..c3334cc5bcb 100644 --- a/arch/blackfin/mach-bf527/head.S +++ b/arch/blackfin/mach-bf527/head.S @@ -30,293 +30,11 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/blackfin.h> -#include <asm/trace.h> - #ifdef CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif -.extern ___bss_stop -.extern ___bss_start -.extern _bf53x_relocate_l1_mem - -#define INITIAL_STACK 0xFFB01000 - -__INIT - -ENTRY(__start) - /* R0: argument of command line string, passed from uboot, save it */ - R7 = R0; - /* Enable Cycle Counter and Nesting Of Interrupts */ -#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES - R0 = SYSCFG_SNEN; -#else - R0 = SYSCFG_SNEN | SYSCFG_CCEN; -#endif - SYSCFG = R0; - R0 = 0; - - /* Clear Out All the data and pointer Registers */ - R1 = R0; - R2 = R0; - R3 = R0; - R4 = R0; - R5 = R0; - R6 = R0; - - P0 = R0; - P1 = R0; - P2 = R0; - P3 = R0; - P4 = R0; - P5 = R0; - - LC0 = r0; - LC1 = r0; - L0 = r0; - L1 = r0; - L2 = r0; - L3 = r0; - - /* Clear Out All the DAG Registers */ - B0 = r0; - B1 = r0; - B2 = r0; - B3 = r0; - - I0 = r0; - I1 = r0; - I2 = r0; - I3 = r0; - - M0 = r0; - M1 = r0; - M2 = r0; - M3 = r0; - - trace_buffer_init(p0,r0); - P0 = R1; - R0 = R1; - - /* Turn off the icache */ - p0.l = LO(IMEM_CONTROL); - p0.h = HI(IMEM_CONTROL); - R1 = [p0]; - R0 = ~ENICPLB; - R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif - [p0] = R0; - SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif - - /* Turn off the dcache */ - p0.l = LO(DMEM_CONTROL); - p0.h = HI(DMEM_CONTROL); - R1 = [p0]; - R0 = ~ENDCPLB; - R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif - [p0] = R0; - SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif - - -#if defined(CONFIG_BF527) - p0.h = hi(EMAC_SYSTAT); - p0.l = lo(EMAC_SYSTAT); - R0.h = 0xFFFF; /* Clear EMAC Interrupt Status bits */ - R0.l = 0xFFFF; - [P0] = R0; - SSYNC; -#endif - - /* Initialise UART - when booting from u-boot, the UART is not disabled - * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(UART1_LCR); - p0.l = lo(UART1_LCR); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable DLL writes */ - ssync; - - p0.h = hi(UART1_DLL); - p0.l = lo(UART1_DLL); - r0 = 0x0(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(UART1_DLH); - p0.l = lo(UART1_DLH); - r0 = 0x00(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(UART1_GCTL); - p0.l = lo(UART1_GCTL); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable UART clock */ - ssync; - - /* Initialize stack pointer */ - sp.l = lo(INITIAL_STACK); - sp.h = hi(INITIAL_STACK); - fp = sp; - usp = sp; - -#ifdef CONFIG_EARLY_PRINTK - SP += -12; - call _init_early_exception_vectors; - SP += 12; -#endif - - /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ - call _bf53x_relocate_l1_mem; -#ifdef CONFIG_BFIN_KERNEL_CLOCK - call _start_dma_code; -#endif - - /* Code for initializing Async memory banks */ - - p2.h = hi(EBIU_AMBCTL1); - p2.l = lo(EBIU_AMBCTL1); - r0.h = hi(AMBCTL1VAL); - r0.l = lo(AMBCTL1VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMBCTL0); - p2.l = lo(EBIU_AMBCTL0); - r0.h = hi(AMBCTL0VAL); - r0.l = lo(AMBCTL0VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMGCTL); - p2.l = lo(EBIU_AMGCTL); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - /* This section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* EVT15 = _real_start */ - - p0.l = lo(EVT15); - p0.h = hi(EVT15); - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - csync; - - p0.l = lo(IMASK); - p0.h = hi(IMASK); - p1.l = IMASK_IVG15; - p1.h = 0x0; - [p0] = p1; - csync; - - raise 15; - p0.l = .LWAIT_HERE; - p0.h = .LWAIT_HERE; - reti = p0; -#if ANOMALY_05000281 - nop; nop; nop; -#endif - rti; - -.LWAIT_HERE: - jump .LWAIT_HERE; -ENDPROC(__start) - -ENTRY(_real_start) - [ -- sp ] = reti; - p0.l = lo(WDOG_CTL); - p0.h = hi(WDOG_CTL); - r0 = 0xAD6(z); - w[p0] = r0; /* watchdog off for now */ - ssync; - - /* Code update for BSS size == 0 - * Zero out the bss region. - */ - - p1.l = ___bss_start; - p1.h = ___bss_start; - p2.l = ___bss_stop; - p2.h = ___bss_stop; - r0 = 0; - p2 -= p1; - lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; -.L_clear_bss: - B[p1++] = r0; - - /* In case there is a NULL pointer reference - * Zero out region before stext - */ - - p1.l = 0x0; - p1.h = 0x0; - r0.l = __stext; - r0.h = __stext; - r0 = r0 >> 1; - p2 = r0; - r0 = 0; - lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; -.L_clear_zero: - W[p1++] = r0; - - /* pass the uboot arguments to the global value command line */ - R0 = R7; - call _cmdline_init; - - p1.l = __rambase; - p1.h = __rambase; - r0.l = __sdata; - r0.h = __sdata; - [p1] = r0; - - p1.l = __ramstart; - p1.h = __ramstart; - p3.l = ___bss_stop; - p3.h = ___bss_stop; - - r1 = p3; - [p1] = r1; - - /* - * load the current thread pointer and stack - */ - r1.l = _init_thread_union; - r1.h = _init_thread_union; - - r2.l = 0x2000; - r2.h = 0x0000; - r1 = r1 + r2; - sp = r1; - usp = sp; - fp = sp; - jump.l _start_kernel; -ENDPROC(_real_start) - -__FINIT - .section .l1.text #ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) @@ -420,13 +138,6 @@ ENTRY(_start_dma_code) [P2] = R1; SSYNC; - p0.h = hi(SIC_IWR0); - p0.l = lo(SIC_IWR0); - r0.l = lo(IWR_ENABLE_ALL); - r0.h = hi(IWR_ENABLE_ALL); - [p0] = r0; - SSYNC; - RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-bf527/ints-priority.c b/arch/blackfin/mach-bf527/ints-priority.c index 1fa38979396..8a2367403d2 100644 --- a/arch/blackfin/mach-bf527/ints-priority.c +++ b/arch/blackfin/mach-bf527/ints-priority.c @@ -31,7 +31,7 @@ #include <linux/irq.h> #include <asm/blackfin.h> -void program_IAR(void) +void __init program_IAR(void) { /* Program the IAR0 Register with the configured priority */ bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) | diff --git a/arch/blackfin/mach-bf533/boards/H8606.c b/arch/blackfin/mach-bf533/boards/H8606.c index 4103a97c1a7..c66a68f3023 100644 --- a/arch/blackfin/mach-bf533/boards/H8606.c +++ b/arch/blackfin/mach-bf533/boards/H8606.c @@ -38,7 +38,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif -#include <linux/ata_platform.h> #include <linux/irq.h> #include <asm/dma.h> @@ -141,16 +140,16 @@ static struct platform_device net2272_bfin_device = { #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00060000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0x100000, .offset = 0x60000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x6a0000, .offset = 0x00160000, } diff --git a/arch/blackfin/mach-bf533/boards/Kconfig b/arch/blackfin/mach-bf533/boards/Kconfig index 840059241fb..308c98dc5ab 100644 --- a/arch/blackfin/mach-bf533/boards/Kconfig +++ b/arch/blackfin/mach-bf533/boards/Kconfig @@ -14,6 +14,12 @@ config BFIN533_STAMP help BF533-STAMP board support. +config BLACKSTAMP + bool "BlackStamp" + help + Support for the BlackStamp board. Hardware info available at + http://blackfin.uclinux.org/gf/project/blackstamp/ + config BFIN533_BLUETECHNIX_CM bool "Bluetechnix CM-BF533" depends on (BF533) diff --git a/arch/blackfin/mach-bf533/boards/Makefile b/arch/blackfin/mach-bf533/boards/Makefile index b7a1a1d79bd..9afbe72b484 100644 --- a/arch/blackfin/mach-bf533/boards/Makefile +++ b/arch/blackfin/mach-bf533/boards/Makefile @@ -7,4 +7,5 @@ obj-$(CONFIG_BFIN533_STAMP) += stamp.o obj-$(CONFIG_BFIN532_IP0X) += ip0x.o obj-$(CONFIG_BFIN533_EZKIT) += ezkit.o obj-$(CONFIG_BFIN533_BLUETECHNIX_CM) += cm_bf533.o +obj-$(CONFIG_BLACKSTAMP) += blackstamp.o obj-$(CONFIG_H8606_HVSISTEMAS) += H8606.o diff --git a/arch/blackfin/mach-bf533/boards/blackstamp.c b/arch/blackfin/mach-bf533/boards/blackstamp.c new file mode 100644 index 00000000000..d064ded8771 --- /dev/null +++ b/arch/blackfin/mach-bf533/boards/blackstamp.c @@ -0,0 +1,401 @@ +/* + * File: arch/blackfin/mach-bf533/blackstamp.c + * Based on: arch/blackfin/mach-bf533/stamp.c + * Author: Benjamin Matthews <bmat@lle.rochester.edu> + * Aidan Williams <aidan@nicta.com.au> + * + * Created: 2008 + * Description: Board Info File for the BlackStamp + * + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * More info about the BlackStamp at: + * http://blackfin.uclinux.org/gf/project/blackstamp/ + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/device.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#include <linux/irq.h> +#include <linux/i2c.h> +#include <asm/dma.h> +#include <asm/bfin5xx_spi.h> +#include <asm/portmux.h> +#include <asm/dpmc.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "BlackStamp"; + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +/* + * Driver needs to know address, irq and flag pin. + */ +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .name = "smc91x-regs", + .start = 0x20300300, + .end = 0x20300300 + 16, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF3, + .end = IRQ_PF3, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader(spi)", + .size = 0x00040000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel(spi)", + .size = 0x180000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(spi)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p64", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) +static struct bfin5xx_spi_chip spidev_chip_info = { + .enable_dma = 0, + .bits_per_word = 8, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 2, /* Framework chip select. */ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 0, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 20000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_SPIDEV) || defined(CONFIG_SPI_SPIDEV_MODULE) + { + .modalias = "spidev", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 7, + .controller_data = &spidev_chip_info, + }, +#endif +}; + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master bfin_spi0_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bfin_spi0_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, +}; +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) +#include <linux/input.h> +#include <linux/gpio_keys.h> + +static struct gpio_keys_button bfin_gpio_keys_table[] = { + {BTN_0, GPIO_PF4, 0, "gpio-keys: BTN0"}, + {BTN_1, GPIO_PF5, 0, "gpio-keys: BTN1"}, + {BTN_2, GPIO_PF6, 0, "gpio-keys: BTN2"}, +}; /* Mapped to the first three PF Test Points */ + +static struct gpio_keys_platform_data bfin_gpio_keys_data = { + .buttons = bfin_gpio_keys_table, + .nbuttons = ARRAY_SIZE(bfin_gpio_keys_table), +}; + +static struct platform_device bfin_device_gpiokeys = { + .name = "gpio-keys", + .dev = { + .platform_data = &bfin_gpio_keys_data, + }, +}; +#endif + +static struct resource bfin_gpios_resources = { + .start = 0, + .end = MAX_BLACKFIN_GPIOS - 1, + .flags = IORESOURCE_IRQ, +}; + +static struct platform_device bfin_gpios_device = { + .name = "simple-gpio", + .id = -1, + .num_resources = 1, + .resource = &bfin_gpios_resources, +}; + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) +#include <linux/i2c-gpio.h> + +static struct i2c_gpio_platform_data i2c_gpio_data = { + .sda_pin = 8, + .scl_pin = 9, + .sda_is_open_drain = 0, + .scl_is_open_drain = 0, + .udelay = 40, +}; /* This hasn't actually been used these pins + * are (currently) free pins on the expansion connector */ + +static struct platform_device i2c_gpio_device = { + .name = "i2c-gpio", + .id = 0, + .dev = { + .platform_data = &i2c_gpio_data, + }, +}; +#endif + +#ifdef CONFIG_I2C_BOARDINFO +static struct i2c_board_info __initdata bfin_i2c_board_info[] = { +}; +#endif + +static const unsigned int cclk_vlev_datasheet[] = +{ + VRPAIR(VLEV_085, 250000000), + VRPAIR(VLEV_090, 376000000), + VRPAIR(VLEV_095, 426000000), + VRPAIR(VLEV_100, 426000000), + VRPAIR(VLEV_105, 476000000), + VRPAIR(VLEV_110, 476000000), + VRPAIR(VLEV_115, 476000000), + VRPAIR(VLEV_120, 600000000), + VRPAIR(VLEV_125, 600000000), + VRPAIR(VLEV_130, 600000000), +}; + +static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { + .tuple_tab = cclk_vlev_datasheet, + .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), + .vr_settling_time = 25 /* us */, +}; + +static struct platform_device bfin_dpmc = { + .name = "bfin dpmc", + .dev = { + .platform_data = &bfin_dmpc_vreg_data, + }, +}; + +static struct platform_device *stamp_devices[] __initdata = { + + &bfin_dpmc, + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bfin_spi0_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) + &bfin_sport0_uart_device, + &bfin_sport1_uart_device, +#endif + +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &bfin_device_gpiokeys, +#endif + +#if defined(CONFIG_I2C_GPIO) || defined(CONFIG_I2C_GPIO_MODULE) + &i2c_gpio_device, +#endif + + &bfin_gpios_device, +}; + +static int __init blackstamp_init(void) +{ + int ret; + + printk(KERN_INFO "%s(): registering device resources\n", __func__); + +#ifdef CONFIG_I2C_BOARDINFO + i2c_register_board_info(0, bfin_i2c_board_info, + ARRAY_SIZE(bfin_i2c_board_info)); +#endif + + ret = platform_add_devices(stamp_devices, ARRAY_SIZE(stamp_devices)); + if (ret < 0) + return ret; + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + /* setup BF533_STAMP CPLD to route AMS3 to Ethernet MAC */ + bfin_write_FIO_DIR(bfin_read_FIO_DIR() | PF0); + bfin_write_FIO_FLAG_S(PF0); + SSYNC(); +#endif + + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); + return 0; +} + +arch_initcall(blackstamp_init); diff --git a/arch/blackfin/mach-bf533/boards/cm_bf533.c b/arch/blackfin/mach-bf533/boards/cm_bf533.c index ed2b0b8f5dc..575843f6d9e 100644 --- a/arch/blackfin/mach-bf533/boards/cm_bf533.c +++ b/arch/blackfin/mach-bf533/boards/cm_bf533.c @@ -36,7 +36,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif -#include <linux/ata_platform.h> #include <linux/irq.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> @@ -53,16 +52,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF533"; #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = 0x20000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x700000, .offset = 0x00100000, } @@ -307,43 +306,6 @@ static struct platform_device isp1362_hcd_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 38 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 2, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x2030C000, - .end = 0x2030C01F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2030D018, - .end = 0x2030D01B, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - static const unsigned int cclk_vlev_datasheet[] = { VRPAIR(VLEV_085, 250000000), @@ -403,10 +365,6 @@ static struct platform_device *cm_bf533_devices[] __initdata = { #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) &bfin_spi0_device, #endif - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif }; static int __init cm_bf533_init(void) @@ -416,10 +374,6 @@ static int __init cm_bf533_init(void) #if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); #endif - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf533/boards/ezkit.c b/arch/blackfin/mach-bf533/boards/ezkit.c index 079389cbd85..cc2e7eeb1d5 100644 --- a/arch/blackfin/mach-bf533/boards/ezkit.c +++ b/arch/blackfin/mach-bf533/boards/ezkit.c @@ -37,7 +37,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif -#include <linux/ata_platform.h> #include <linux/irq.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> @@ -90,16 +89,16 @@ static struct platform_device smc91x_device = { #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "file system", + .name = "file system(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -255,43 +254,6 @@ static struct platform_device bfin_sir_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -404,10 +366,6 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_sir_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif @@ -424,10 +382,6 @@ static int __init ezkit_init(void) printk(KERN_INFO "%s(): registering device resources\n", __func__); platform_add_devices(ezkit_devices, ARRAY_SIZE(ezkit_devices)); spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf533/boards/stamp.c b/arch/blackfin/mach-bf533/boards/stamp.c index 13ae49515f7..050ffca5353 100644 --- a/arch/blackfin/mach-bf533/boards/stamp.c +++ b/arch/blackfin/mach-bf533/boards/stamp.c @@ -38,7 +38,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif -#include <linux/ata_platform.h> #include <linux/irq.h> #include <linux/i2c.h> #include <asm/dma.h> @@ -114,15 +113,15 @@ static struct platform_device net2272_bfin_device = { #if defined(CONFIG_MTD_BFIN_ASYNC) || defined(CONFIG_MTD_BFIN_ASYNC_MODULE) static struct mtd_partition stamp_partitions[] = { { - .name = "Bootloader", + .name = "bootloader(nor)", .size = 0x40000, .offset = 0, }, { - .name = "Kernel", + .name = "linux kernel(nor)", .size = 0xE0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "RootFS", + .name = "file system(nor)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -164,16 +163,16 @@ static struct platform_device stamp_flash_device = { #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "file system", + .name = "file system(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -404,43 +403,6 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -583,10 +545,6 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport1_uart_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif @@ -625,10 +583,6 @@ static int __init stamp_init(void) #endif spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf533/head.S b/arch/blackfin/mach-bf533/head.S index c671e8549b1..d59db86195b 100644 --- a/arch/blackfin/mach-bf533/head.S +++ b/arch/blackfin/mach-bf533/head.S @@ -30,294 +30,11 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/blackfin.h> -#include <asm/trace.h> #ifdef CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif -.extern ___bss_stop -.extern ___bss_start -.extern _bf53x_relocate_l1_mem - -#define INITIAL_STACK 0xFFB01000 - -__INIT - -ENTRY(__start) - /* R0: argument of command line string, passed from uboot, save it */ - R7 = R0; - /* Enable Cycle Counter and Nesting Of Interrupts */ -#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES - R0 = SYSCFG_SNEN; -#else - R0 = SYSCFG_SNEN | SYSCFG_CCEN; -#endif - SYSCFG = R0; - R0 = 0; - - /* Clear Out All the data and pointer Registers */ - R1 = R0; - R2 = R0; - R3 = R0; - R4 = R0; - R5 = R0; - R6 = R0; - - P0 = R0; - P1 = R0; - P2 = R0; - P3 = R0; - P4 = R0; - P5 = R0; - - LC0 = r0; - LC1 = r0; - L0 = r0; - L1 = r0; - L2 = r0; - L3 = r0; - - /* Clear Out All the DAG Registers */ - B0 = r0; - B1 = r0; - B2 = r0; - B3 = r0; - - I0 = r0; - I1 = r0; - I2 = r0; - I3 = r0; - - M0 = r0; - M1 = r0; - M2 = r0; - M3 = r0; - - trace_buffer_init(p0,r0); - P0 = R1; - R0 = R1; - - p0.h = hi(FIO_MASKA_C); - p0.l = lo(FIO_MASKA_C); - r0 = 0xFFFF(Z); - w[p0] = r0.L; /* Disable all interrupts */ - ssync; - - p0.h = hi(FIO_MASKB_C); - p0.l = lo(FIO_MASKB_C); - r0 = 0xFFFF(Z); - w[p0] = r0.L; /* Disable all interrupts */ - ssync; - - /* Turn off the icache */ - p0.l = LO(IMEM_CONTROL); - p0.h = HI(IMEM_CONTROL); - R1 = [p0]; - R0 = ~ENICPLB; - R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif - [p0] = R0; - SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif - - /* Turn off the dcache */ - p0.l = LO(DMEM_CONTROL); - p0.h = HI(DMEM_CONTROL); - R1 = [p0]; - R0 = ~ENDCPLB; - R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif - [p0] = R0; - SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif - - /* Initialise UART - when booting from u-boot, the UART is not disabled - * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(BFIN_UART_LCR); - p0.l = lo(BFIN_UART_LCR); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable DLL writes */ - ssync; - - p0.h = hi(BFIN_UART_DLL); - p0.l = lo(BFIN_UART_DLL); - r0 = 0x0(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_DLH); - p0.l = lo(BFIN_UART_DLH); - r0 = 0x00(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_GCTL); - p0.l = lo(BFIN_UART_GCTL); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable UART clock */ - ssync; - - /* Initialize stack pointer */ - sp.l = lo(INITIAL_STACK); - sp.h = hi(INITIAL_STACK); - fp = sp; - usp = sp; - -#ifdef CONFIG_EARLY_PRINTK - SP += -12; - call _init_early_exception_vectors; - SP += 12; -#endif - - /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ - call _bf53x_relocate_l1_mem; -#ifdef CONFIG_BFIN_KERNEL_CLOCK - call _start_dma_code; -#endif - - /* Code for initializing Async memory banks */ - - p2.h = hi(EBIU_AMBCTL1); - p2.l = lo(EBIU_AMBCTL1); - r0.h = hi(AMBCTL1VAL); - r0.l = lo(AMBCTL1VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMBCTL0); - p2.l = lo(EBIU_AMBCTL0); - r0.h = hi(AMBCTL0VAL); - r0.l = lo(AMBCTL0VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMGCTL); - p2.l = lo(EBIU_AMGCTL); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - /* This section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* EVT15 = _real_start */ - - p0.l = lo(EVT15); - p0.h = hi(EVT15); - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - csync; - - p0.l = lo(IMASK); - p0.h = hi(IMASK); - p1.l = IMASK_IVG15; - p1.h = 0x0; - [p0] = p1; - csync; - - raise 15; - p0.l = .LWAIT_HERE; - p0.h = .LWAIT_HERE; - reti = p0; -#if ANOMALY_05000281 - nop; nop; nop; -#endif - rti; - -.LWAIT_HERE: - jump .LWAIT_HERE; -ENDPROC(__start) - -ENTRY(_real_start) - [ -- sp ] = reti; - p0.l = lo(WDOG_CTL); - p0.h = hi(WDOG_CTL); - r0 = 0xAD6(z); - w[p0] = r0; /* watchdog off for now */ - ssync; - - /* Code update for BSS size == 0 - * Zero out the bss region. - */ - - p1.l = ___bss_start; - p1.h = ___bss_start; - p2.l = ___bss_stop; - p2.h = ___bss_stop; - r0 = 0; - p2 -= p1; - lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; -.L_clear_bss: - B[p1++] = r0; - - /* In case there is a NULL pointer reference - * Zero out region before stext - */ - - p1.l = 0x0; - p1.h = 0x0; - r0.l = __stext; - r0.h = __stext; - r0 = r0 >> 1; - p2 = r0; - r0 = 0; - lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; -.L_clear_zero: - W[p1++] = r0; - - /* pass the uboot arguments to the global value command line */ - R0 = R7; - call _cmdline_init; - - p1.l = __rambase; - p1.h = __rambase; - r0.l = __sdata; - r0.h = __sdata; - [p1] = r0; - - p1.l = __ramstart; - p1.h = __ramstart; - p3.l = ___bss_stop; - p3.h = ___bss_stop; - - r1 = p3; - [p1] = r1; - - /* - * load the current thread pointer and stack - */ - r1.l = _init_thread_union; - r1.h = _init_thread_union; - - r2.l = 0x2000; - r2.h = 0x0000; - r1 = r1 + r2; - sp = r1; - usp = sp; - fp = sp; - jump.l _start_kernel; -ENDPROC(_real_start) - -__FINIT - .section .l1.text #ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) @@ -412,13 +129,6 @@ ENTRY(_start_dma_code) [P2] = R1; SSYNC; - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = lo(IWR_ENABLE_ALL); - r0.h = hi(IWR_ENABLE_ALL); - [p0] = r0; - SSYNC; - RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-bf533/ints-priority.c b/arch/blackfin/mach-bf533/ints-priority.c index 7d79e0f9503..f51994b7a2b 100644 --- a/arch/blackfin/mach-bf533/ints-priority.c +++ b/arch/blackfin/mach-bf533/ints-priority.c @@ -31,7 +31,7 @@ #include <linux/irq.h> #include <asm/blackfin.h> -void program_IAR(void) +void __init program_IAR(void) { /* Program the IAR0 Register with the configured priority */ bfin_write_SIC_IAR0(((CONFIG_PLLWAKE_ERROR - 7) << PLLWAKE_ERROR_POS) | diff --git a/arch/blackfin/mach-bf537/boards/Kconfig b/arch/blackfin/mach-bf537/boards/Kconfig index 7e789dbef03..42a57b0acb2 100644 --- a/arch/blackfin/mach-bf537/boards/Kconfig +++ b/arch/blackfin/mach-bf537/boards/Kconfig @@ -15,6 +15,12 @@ config BFIN537_BLUETECHNIX_CM help CM-BF537 support for EVAL- and DEV-Board. +config BFIN537_BLUETECHNIX_TCM + bool "Bluetechnix TCM-BF537" + depends on (BF537) + help + TCM-BF537 support for EVAL- and DEV-Board. + config PNAV10 bool "PNAV board" depends on (BF537) diff --git a/arch/blackfin/mach-bf537/boards/Makefile b/arch/blackfin/mach-bf537/boards/Makefile index c94f7a5b821..7168cc14afd 100644 --- a/arch/blackfin/mach-bf537/boards/Makefile +++ b/arch/blackfin/mach-bf537/boards/Makefile @@ -5,5 +5,6 @@ obj-$(CONFIG_GENERIC_BF537_BOARD) += generic_board.o obj-$(CONFIG_BFIN537_STAMP) += stamp.o obj-$(CONFIG_BFIN537_BLUETECHNIX_CM) += cm_bf537.o +obj-$(CONFIG_BFIN537_BLUETECHNIX_TCM) += tcm_bf537.o obj-$(CONFIG_PNAV10) += pnav10.o obj-$(CONFIG_CAMSIG_MINOTAUR) += minotaur.o diff --git a/arch/blackfin/mach-bf537/boards/cm_bf537.c b/arch/blackfin/mach-bf537/boards/cm_bf537.c index 73f2142875e..dde14720b0e 100644 --- a/arch/blackfin/mach-bf537/boards/cm_bf537.c +++ b/arch/blackfin/mach-bf537/boards/cm_bf537.c @@ -33,6 +33,7 @@ #include <linux/platform_device.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> #include <linux/spi/spi.h> #include <linux/spi/flash.h> #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) @@ -56,16 +57,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF537"; #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = 0x20000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x700000, .offset = 0x00100000, } @@ -307,6 +308,55 @@ static struct platform_device net2272_bfin_device = { }; #endif +#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +static struct mtd_partition cm_partitions[] = { + { + .name = "bootloader(nor)", + .size = 0x40000, + .offset = 0, + }, { + .name = "linux kernel(nor)", + .size = 0xE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(nor)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data cm_flash_data = { + .width = 2, + .parts = cm_partitions, + .nr_parts = ARRAY_SIZE(cm_partitions), +}; + +static unsigned cm_flash_gpios[] = { GPIO_PF4 }; + +static struct resource cm_flash_resource[] = { + { + .name = "cfi_probe", + .start = 0x20000000, + .end = 0x201fffff, + .flags = IORESOURCE_MEM, + }, { + .start = (unsigned long)cm_flash_gpios, + .end = ARRAY_SIZE(cm_flash_gpios), + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device cm_flash_device = { + .name = "gpio-addr-flash", + .id = 0, + .dev = { + .platform_data = &cm_flash_data, + }, + .num_resources = ARRAY_SIZE(cm_flash_resource), + .resource = cm_flash_resource, +}; +#endif + #if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) static struct resource bfin_uart_resources[] = { { @@ -395,7 +445,7 @@ static struct platform_device bfin_mac_device = { #endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 64 +#define PATA_INT IRQ_PF14 static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 2, @@ -510,6 +560,10 @@ static struct platform_device *cm_bf537_devices[] __initdata = { #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) &bfin_pata_device, #endif + +#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) + &cm_flash_device, +#endif }; static int __init cm_bf537_init(void) diff --git a/arch/blackfin/mach-bf537/boards/generic_board.c b/arch/blackfin/mach-bf537/boards/generic_board.c index 01b63e2ec18..78a13d5bfd5 100644 --- a/arch/blackfin/mach-bf537/boards/generic_board.c +++ b/arch/blackfin/mach-bf537/boards/generic_board.c @@ -38,7 +38,6 @@ #if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) #include <linux/usb/isp1362.h> #endif -#include <linux/ata_platform.h> #include <linux/irq.h> #include <linux/interrupt.h> #include <linux/usb/sl811.h> @@ -307,16 +306,16 @@ static struct platform_device net2272_bfin_device = { || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = 0x20000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x700000, .offset = 0x00100000, } @@ -619,43 +618,6 @@ static struct platform_device bfin_sport1_uart_device = { }; #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - static struct platform_device *stamp_devices[] __initdata = { #if defined(CONFIG_BFIN_CFPCMCIA) || defined(CONFIG_BFIN_CFPCMCIA_MODULE) &bfin_pcmcia_cf_device, @@ -717,10 +679,6 @@ static struct platform_device *stamp_devices[] __initdata = { &bfin_sport0_uart_device, &bfin_sport1_uart_device, #endif - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif }; static int __init stamp_init(void) @@ -732,9 +690,6 @@ static int __init stamp_init(void) ARRAY_SIZE(bfin_spi_board_info)); #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf537/boards/minotaur.c b/arch/blackfin/mach-bf537/boards/minotaur.c index 18ddf7a5200..48c4cd2d1be 100644 --- a/arch/blackfin/mach-bf537/boards/minotaur.c +++ b/arch/blackfin/mach-bf537/boards/minotaur.c @@ -100,16 +100,16 @@ static struct platform_device net2272_bfin_device = { static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "uboot", + .name = "bootloader(spi)", .size = PSIZE_UBOOT, .offset = 0x000000, .mask_flags = MTD_CAP_ROM }, { - .name = "initramfs", + .name = "initramfs(spi)", .size = PSIZE_INITRAMFS, .offset = PSIZE_UBOOT }, { - .name = "opt", + .name = "opt(spi)", .size = FLASH_SIZE - (PSIZE_UBOOT + PSIZE_INITRAMFS), .offset = PSIZE_UBOOT + PSIZE_INITRAMFS, } diff --git a/arch/blackfin/mach-bf537/boards/pnav10.c b/arch/blackfin/mach-bf537/boards/pnav10.c index 51c3bab14a6..f9174c11cbd 100644 --- a/arch/blackfin/mach-bf537/boards/pnav10.c +++ b/arch/blackfin/mach-bf537/boards/pnav10.c @@ -231,16 +231,16 @@ static struct platform_device net2272_bfin_device = { || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = 0x20000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x700000, .offset = 0x00100000, } diff --git a/arch/blackfin/mach-bf537/boards/stamp.c b/arch/blackfin/mach-bf537/boards/stamp.c index 6dbc76fb080..e93964fdb43 100644 --- a/arch/blackfin/mach-bf537/boards/stamp.c +++ b/arch/blackfin/mach-bf537/boards/stamp.c @@ -364,11 +364,11 @@ const char *part_probes[] = { "cmdlinepart", "RedBoot", NULL }; static struct mtd_partition bfin_plat_nand_partitions[] = { { - .name = "linux kernel", + .name = "linux kernel(nand)", .size = 0x400000, .offset = 0, }, { - .name = "file system", + .name = "file system(nand)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, }, @@ -439,19 +439,19 @@ static void bfin_plat_nand_init(void) {} #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition stamp_partitions[] = { { - .name = "Bootloader", + .name = "bootloader(nor)", .size = 0x40000, .offset = 0, }, { - .name = "Kernel", + .name = "linux kernel(nor)", .size = 0xE0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "RootFS", + .name = "file system(nor)", .size = 0x400000 - 0x40000 - 0xE0000 - 0x10000, .offset = MTDPART_OFS_APPEND, }, { - .name = "MAC Address", + .name = "MAC Address(nor)", .size = MTDPART_SIZ_FULL, .offset = 0x3F0000, .mask_flags = MTD_WRITEABLE, @@ -485,16 +485,16 @@ static struct platform_device stamp_flash_device = { || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "file system", + .name = "file system(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } diff --git a/arch/blackfin/mach-bf537/boards/tcm_bf537.c b/arch/blackfin/mach-bf537/boards/tcm_bf537.c new file mode 100644 index 00000000000..d5ff705a512 --- /dev/null +++ b/arch/blackfin/mach-bf537/boards/tcm_bf537.c @@ -0,0 +1,590 @@ +/* + * File: arch/blackfin/mach-bf537/boards/tcm_bf537.c + * Based on: arch/blackfin/mach-bf533/boards/cm_bf537.c + * Author: Aidan Williams <aidan@nicta.com.au> + * + * Created: 2005 + * Description: Board description file + * + * Modified: + * Copyright 2005 National ICT Australia (NICTA) + * Copyright 2004-2006 Analog Devices Inc. + * + * Bugs: Enter bugs at http://blackfin.uclinux.org/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, see the file COPYING, or write + * to the Free Software Foundation, Inc., + * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA + */ + +#include <linux/device.h> +#include <linux/etherdevice.h> +#include <linux/platform_device.h> +#include <linux/mtd/mtd.h> +#include <linux/mtd/partitions.h> +#include <linux/mtd/physmap.h> +#include <linux/spi/spi.h> +#include <linux/spi/flash.h> +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +#include <linux/usb/isp1362.h> +#endif +#include <linux/ata_platform.h> +#include <linux/irq.h> +#include <asm/dma.h> +#include <asm/bfin5xx_spi.h> +#include <asm/portmux.h> +#include <asm/dpmc.h> + +/* + * Name the Board for the /proc/cpuinfo + */ +const char bfin_board_name[] = "Bluetechnix TCM BF537"; + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) +/* all SPI peripherals info goes here */ + +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) +static struct mtd_partition bfin_spi_flash_partitions[] = { + { + .name = "bootloader(spi)", + .size = 0x00020000, + .offset = 0, + .mask_flags = MTD_CAP_ROM + }, { + .name = "linux kernel(spi)", + .size = 0xe0000, + .offset = 0x20000 + }, { + .name = "file system(spi)", + .size = 0x700000, + .offset = 0x00100000, + } +}; + +static struct flash_platform_data bfin_spi_flash_data = { + .name = "m25p80", + .parts = bfin_spi_flash_partitions, + .nr_parts = ARRAY_SIZE(bfin_spi_flash_partitions), + .type = "m25p64", +}; + +/* SPI flash chip (m25p64) */ +static struct bfin5xx_spi_chip spi_flash_chip_info = { + .enable_dma = 0, /* use dma transfer with this chip*/ + .bits_per_word = 8, +}; +#endif + +#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) +/* SPI ADC chip */ +static struct bfin5xx_spi_chip spi_adc_chip_info = { + .enable_dma = 1, /* use dma transfer with this chip*/ + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) +static struct bfin5xx_spi_chip ad1836_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) +static struct bfin5xx_spi_chip ad9960_spi_chip_info = { + .enable_dma = 0, + .bits_per_word = 16, +}; +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) +static struct bfin5xx_spi_chip spi_mmc_chip_info = { + .enable_dma = 1, + .bits_per_word = 8, +}; +#endif + +static struct spi_board_info bfin_spi_board_info[] __initdata = { +#if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) + { + /* the modalias must be the same as spi device driver name */ + .modalias = "m25p80", /* Name of spi_driver for this device */ + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. On STAMP537 it is SPISSEL1*/ + .platform_data = &bfin_spi_flash_data, + .controller_data = &spi_flash_chip_info, + .mode = SPI_MODE_3, + }, +#endif + +#if defined(CONFIG_SPI_ADC_BF533) || defined(CONFIG_SPI_ADC_BF533_MODULE) + { + .modalias = "bfin_spi_adc", /* Name of spi_driver for this device */ + .max_speed_hz = 6250000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, /* Framework bus number */ + .chip_select = 1, /* Framework chip select. */ + .platform_data = NULL, /* No spi_driver specific config */ + .controller_data = &spi_adc_chip_info, + }, +#endif + +#if defined(CONFIG_SND_BLACKFIN_AD1836) || defined(CONFIG_SND_BLACKFIN_AD1836_MODULE) + { + .modalias = "ad1836-spi", + .max_speed_hz = 3125000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SND_BLACKFIN_SPI_PFBIT, + .controller_data = &ad1836_spi_chip_info, + }, +#endif + +#if defined(CONFIG_AD9960) || defined(CONFIG_AD9960_MODULE) + { + .modalias = "ad9960-spi", + .max_speed_hz = 10000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 1, + .controller_data = &ad9960_spi_chip_info, + }, +#endif + +#if defined(CONFIG_SPI_MMC) || defined(CONFIG_SPI_MMC_MODULE) + { + .modalias = "spi_mmc_dummy", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = 7, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, + { + .modalias = "spi_mmc", + .max_speed_hz = 25000000, /* max spi clock (SCK) speed in HZ */ + .bus_num = 0, + .chip_select = CONFIG_SPI_MMC_CS_CHAN, + .platform_data = NULL, + .controller_data = &spi_mmc_chip_info, + .mode = SPI_MODE_3, + }, +#endif +}; + +/* SPI (0) */ +static struct resource bfin_spi0_resource[] = { + [0] = { + .start = SPI0_REGBASE, + .end = SPI0_REGBASE + 0xFF, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = CH_SPI, + .end = CH_SPI, + .flags = IORESOURCE_IRQ, + } +}; + +/* SPI controller data */ +static struct bfin5xx_spi_master bfin_spi0_info = { + .num_chipselect = 8, + .enable_dma = 1, /* master has the ability to do dma transfer */ + .pin_req = {P_SPI0_SCK, P_SPI0_MISO, P_SPI0_MOSI, 0}, +}; + +static struct platform_device bfin_spi0_device = { + .name = "bfin-spi", + .id = 0, /* Bus number */ + .num_resources = ARRAY_SIZE(bfin_spi0_resource), + .resource = bfin_spi0_resource, + .dev = { + .platform_data = &bfin_spi0_info, /* Passed to driver */ + }, +}; +#endif /* spi master and devices */ + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) +static struct platform_device rtc_device = { + .name = "rtc-bfin", + .id = -1, +}; +#endif + +#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) +static struct platform_device hitachi_fb_device = { + .name = "hitachi-tx09", +}; +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) +static struct resource smc91x_resources[] = { + { + .start = 0x20200300, + .end = 0x20200300 + 16, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PF14, + .end = IRQ_PF14, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device smc91x_device = { + .name = "smc91x", + .id = 0, + .num_resources = ARRAY_SIZE(smc91x_resources), + .resource = smc91x_resources, +}; +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) +static struct resource isp1362_hcd_resources[] = { + { + .start = 0x20308000, + .end = 0x20308000, + .flags = IORESOURCE_MEM, + }, { + .start = 0x20308004, + .end = 0x20308004, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PG15, + .end = IRQ_PG15, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct isp1362_platform_data isp1362_priv = { + .sel15Kres = 1, + .clknotstop = 0, + .oc_enable = 0, + .int_act_high = 0, + .int_edge_triggered = 0, + .remote_wakeup_connected = 0, + .no_power_switching = 1, + .power_switching_mode = 0, +}; + +static struct platform_device isp1362_hcd_device = { + .name = "isp1362-hcd", + .id = 0, + .dev = { + .platform_data = &isp1362_priv, + }, + .num_resources = ARRAY_SIZE(isp1362_hcd_resources), + .resource = isp1362_hcd_resources, +}; +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) +static struct resource net2272_bfin_resources[] = { + { + .start = 0x20200000, + .end = 0x20200000 + 0x100, + .flags = IORESOURCE_MEM, + }, { + .start = IRQ_PH14, + .end = IRQ_PH14, + .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHLEVEL, + }, +}; + +static struct platform_device net2272_bfin_device = { + .name = "net2272", + .id = -1, + .num_resources = ARRAY_SIZE(net2272_bfin_resources), + .resource = net2272_bfin_resources, +}; +#endif + +#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) +static struct mtd_partition cm_partitions[] = { + { + .name = "bootloader(nor)", + .size = 0x40000, + .offset = 0, + }, { + .name = "linux kernel(nor)", + .size = 0xE0000, + .offset = MTDPART_OFS_APPEND, + }, { + .name = "file system(nor)", + .size = MTDPART_SIZ_FULL, + .offset = MTDPART_OFS_APPEND, + } +}; + +static struct physmap_flash_data cm_flash_data = { + .width = 2, + .parts = cm_partitions, + .nr_parts = ARRAY_SIZE(cm_partitions), +}; + +static unsigned cm_flash_gpios[] = { GPIO_PF4, GPIO_PF5 }; + +static struct resource cm_flash_resource[] = { + { + .name = "cfi_probe", + .start = 0x20000000, + .end = 0x201fffff, + .flags = IORESOURCE_MEM, + }, { + .start = (unsigned long)cm_flash_gpios, + .end = ARRAY_SIZE(cm_flash_gpios), + .flags = IORESOURCE_IRQ, + } +}; + +static struct platform_device cm_flash_device = { + .name = "gpio-addr-flash", + .id = 0, + .dev = { + .platform_data = &cm_flash_data, + }, + .num_resources = ARRAY_SIZE(cm_flash_resource), + .resource = cm_flash_resource, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) +static struct resource bfin_uart_resources[] = { + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +}; + +static struct platform_device bfin_uart_device = { + .name = "bfin-uart", + .id = 1, + .num_resources = ARRAY_SIZE(bfin_uart_resources), + .resource = bfin_uart_resources, +}; +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) +static struct resource bfin_sir_resources[] = { +#ifdef CONFIG_BFIN_SIR0 + { + .start = 0xFFC00400, + .end = 0xFFC004FF, + .flags = IORESOURCE_MEM, + }, +#endif +#ifdef CONFIG_BFIN_SIR1 + { + .start = 0xFFC02000, + .end = 0xFFC020FF, + .flags = IORESOURCE_MEM, + }, +#endif +}; + +static struct platform_device bfin_sir_device = { + .name = "bfin_sir", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_sir_resources), + .resource = bfin_sir_resources, +}; +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) +static struct resource bfin_twi0_resource[] = { + [0] = { + .start = TWI0_REGBASE, + .end = TWI0_REGBASE, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_TWI, + .end = IRQ_TWI, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device i2c_bfin_twi_device = { + .name = "i2c-bfin-twi", + .id = 0, + .num_resources = ARRAY_SIZE(bfin_twi0_resource), + .resource = bfin_twi0_resource, +}; +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) +static struct platform_device bfin_sport0_uart_device = { + .name = "bfin-sport-uart", + .id = 0, +}; + +static struct platform_device bfin_sport1_uart_device = { + .name = "bfin-sport-uart", + .id = 1, +}; +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) +static struct platform_device bfin_mac_device = { + .name = "bfin_mac", +}; +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) +#define PATA_INT IRQ_PF14 + +static struct pata_platform_info bfin_pata_platform_data = { + .ioport_shift = 2, + .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, +}; + +static struct resource bfin_pata_resources[] = { + { + .start = 0x2030C000, + .end = 0x2030C01F, + .flags = IORESOURCE_MEM, + }, + { + .start = 0x2030D018, + .end = 0x2030D01B, + .flags = IORESOURCE_MEM, + }, + { + .start = PATA_INT, + .end = PATA_INT, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct platform_device bfin_pata_device = { + .name = "pata_platform", + .id = -1, + .num_resources = ARRAY_SIZE(bfin_pata_resources), + .resource = bfin_pata_resources, + .dev = { + .platform_data = &bfin_pata_platform_data, + } +}; +#endif + +static const unsigned int cclk_vlev_datasheet[] = +{ + VRPAIR(VLEV_085, 250000000), + VRPAIR(VLEV_090, 376000000), + VRPAIR(VLEV_095, 426000000), + VRPAIR(VLEV_100, 426000000), + VRPAIR(VLEV_105, 476000000), + VRPAIR(VLEV_110, 476000000), + VRPAIR(VLEV_115, 476000000), + VRPAIR(VLEV_120, 500000000), + VRPAIR(VLEV_125, 533000000), + VRPAIR(VLEV_130, 600000000), +}; + +static struct bfin_dpmc_platform_data bfin_dmpc_vreg_data = { + .tuple_tab = cclk_vlev_datasheet, + .tabsize = ARRAY_SIZE(cclk_vlev_datasheet), + .vr_settling_time = 25 /* us */, +}; + +static struct platform_device bfin_dpmc = { + .name = "bfin dpmc", + .dev = { + .platform_data = &bfin_dmpc_vreg_data, + }, +}; + +static struct platform_device *cm_bf537_devices[] __initdata = { + + &bfin_dpmc, + +#if defined(CONFIG_FB_HITACHI_TX09) || defined(CONFIG_FB_HITACHI_TX09_MODULE) + &hitachi_fb_device, +#endif + +#if defined(CONFIG_RTC_DRV_BFIN) || defined(CONFIG_RTC_DRV_BFIN_MODULE) + &rtc_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN) || defined(CONFIG_SERIAL_BFIN_MODULE) + &bfin_uart_device, +#endif + +#if defined(CONFIG_BFIN_SIR) || defined(CONFIG_BFIN_SIR_MODULE) + &bfin_sir_device, +#endif + +#if defined(CONFIG_I2C_BLACKFIN_TWI) || defined(CONFIG_I2C_BLACKFIN_TWI_MODULE) + &i2c_bfin_twi_device, +#endif + +#if defined(CONFIG_SERIAL_BFIN_SPORT) || defined(CONFIG_SERIAL_BFIN_SPORT_MODULE) + &bfin_sport0_uart_device, + &bfin_sport1_uart_device, +#endif + +#if defined(CONFIG_USB_ISP1362_HCD) || defined(CONFIG_USB_ISP1362_HCD_MODULE) + &isp1362_hcd_device, +#endif + +#if defined(CONFIG_SMC91X) || defined(CONFIG_SMC91X_MODULE) + &smc91x_device, +#endif + +#if defined(CONFIG_BFIN_MAC) || defined(CONFIG_BFIN_MAC_MODULE) + &bfin_mac_device, +#endif + +#if defined(CONFIG_USB_NET2272) || defined(CONFIG_USB_NET2272_MODULE) + &net2272_bfin_device, +#endif + +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + &bfin_spi0_device, +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + &bfin_pata_device, +#endif + +#if defined(CONFIG_MTD_GPIO_ADDR) || defined(CONFIG_MTD_GPIO_ADDR_MODULE) + &cm_flash_device, +#endif +}; + +static int __init cm_bf537_init(void) +{ + printk(KERN_INFO "%s(): registering device resources\n", __func__); + platform_add_devices(cm_bf537_devices, ARRAY_SIZE(cm_bf537_devices)); +#if defined(CONFIG_SPI_BFIN) || defined(CONFIG_SPI_BFIN_MODULE) + spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); +#endif + +#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) + irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; +#endif + return 0; +} + +arch_initcall(cm_bf537_init); + +void bfin_get_ether_addr(char *addr) +{ + random_ether_addr(addr); + printk(KERN_WARNING "%s:%s: Setting Ethernet MAC to a random one\n", __FILE__, __func__); +} +EXPORT_SYMBOL(bfin_get_ether_addr); diff --git a/arch/blackfin/mach-bf537/head.S b/arch/blackfin/mach-bf537/head.S index 6b019eaee0b..64e0287ab26 100644 --- a/arch/blackfin/mach-bf537/head.S +++ b/arch/blackfin/mach-bf537/head.S @@ -30,325 +30,11 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/blackfin.h> -#include <asm/trace.h> - #ifdef CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif -.extern ___bss_stop -.extern ___bss_start -.extern _bf53x_relocate_l1_mem - -#define INITIAL_STACK 0xFFB01000 - -__INIT - -ENTRY(__start) - /* R0: argument of command line string, passed from uboot, save it */ - R7 = R0; - /* Enable Cycle Counter and Nesting Of Interrupts */ -#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES - R0 = SYSCFG_SNEN; -#else - R0 = SYSCFG_SNEN | SYSCFG_CCEN; -#endif - SYSCFG = R0; - R0 = 0; - - /* Clear Out All the data and pointer Registers */ - R1 = R0; - R2 = R0; - R3 = R0; - R4 = R0; - R5 = R0; - R6 = R0; - - P0 = R0; - P1 = R0; - P2 = R0; - P3 = R0; - P4 = R0; - P5 = R0; - - LC0 = r0; - LC1 = r0; - L0 = r0; - L1 = r0; - L2 = r0; - L3 = r0; - - /* Clear Out All the DAG Registers */ - B0 = r0; - B1 = r0; - B2 = r0; - B3 = r0; - - I0 = r0; - I1 = r0; - I2 = r0; - I3 = r0; - - M0 = r0; - M1 = r0; - M2 = r0; - M3 = r0; - - trace_buffer_init(p0,r0); - P0 = R1; - R0 = R1; - - /* Turn off the icache */ - p0.l = LO(IMEM_CONTROL); - p0.h = HI(IMEM_CONTROL); - R1 = [p0]; - R0 = ~ENICPLB; - R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif - [p0] = R0; - SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif - - /* Turn off the dcache */ - p0.l = LO(DMEM_CONTROL); - p0.h = HI(DMEM_CONTROL); - R1 = [p0]; - R0 = ~ENDCPLB; - R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif - [p0] = R0; - SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif - - /* Initialise General-Purpose I/O Modules on BF537 */ - /* Rev 0.0 Anomaly 05000212 - PORTx_FER, - * PORT_MUX Registers Do Not accept "writes" correctly: - */ - p0.h = hi(BFIN_PORT_MUX); - p0.l = lo(BFIN_PORT_MUX); -#if ANOMALY_05000212 - R0.L = W[P0]; /* Read */ - SSYNC; -#endif - R0 = (PGDE_UART | PFTE_UART)(Z); -#if ANOMALY_05000212 - W[P0] = R0.L; /* Write */ - SSYNC; -#endif - W[P0] = R0.L; /* Enable both UARTS */ - SSYNC; - - p0.h = hi(PORTF_FER); - p0.l = lo(PORTF_FER); -#if ANOMALY_05000212 - R0.L = W[P0]; /* Read */ - SSYNC; -#endif - R0 = 0x000F(Z); -#if ANOMALY_05000212 - W[P0] = R0.L; /* Write */ - SSYNC; -#endif - /* Enable peripheral function of PORTF for UART0 and UART1 */ - W[P0] = R0.L; - SSYNC; - -#if !defined(CONFIG_BF534) - p0.h = hi(EMAC_SYSTAT); - p0.l = lo(EMAC_SYSTAT); - R0.h = 0xFFFF; /* Clear EMAC Interrupt Status bits */ - R0.l = 0xFFFF; - [P0] = R0; - SSYNC; -#endif - - /* Initialise UART - when booting from u-boot, the UART is not disabled - * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(BFIN_UART_LCR); - p0.l = lo(BFIN_UART_LCR); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable DLL writes */ - ssync; - - p0.h = hi(BFIN_UART_DLL); - p0.l = lo(BFIN_UART_DLL); - r0 = 0x0(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_DLH); - p0.l = lo(BFIN_UART_DLH); - r0 = 0x00(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_GCTL); - p0.l = lo(BFIN_UART_GCTL); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable UART clock */ - ssync; - - /* Initialize stack pointer */ - sp.l = lo(INITIAL_STACK); - sp.h = hi(INITIAL_STACK); - fp = sp; - usp = sp; - -#ifdef CONFIG_EARLY_PRINTK - SP += -12; - call _init_early_exception_vectors; - SP += 12; -#endif - - /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ - call _bf53x_relocate_l1_mem; -#ifdef CONFIG_BFIN_KERNEL_CLOCK - call _start_dma_code; -#endif - - /* Code for initializing Async memory banks */ - - p2.h = hi(EBIU_AMBCTL1); - p2.l = lo(EBIU_AMBCTL1); - r0.h = hi(AMBCTL1VAL); - r0.l = lo(AMBCTL1VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMBCTL0); - p2.l = lo(EBIU_AMBCTL0); - r0.h = hi(AMBCTL0VAL); - r0.l = lo(AMBCTL0VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMGCTL); - p2.l = lo(EBIU_AMGCTL); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - /* This section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* EVT15 = _real_start */ - - p0.l = lo(EVT15); - p0.h = hi(EVT15); - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - csync; - - p0.l = lo(IMASK); - p0.h = hi(IMASK); - p1.l = IMASK_IVG15; - p1.h = 0x0; - [p0] = p1; - csync; - - raise 15; - p0.l = .LWAIT_HERE; - p0.h = .LWAIT_HERE; - reti = p0; -#if ANOMALY_05000281 - nop; nop; nop; -#endif - rti; - -.LWAIT_HERE: - jump .LWAIT_HERE; -ENDPROC(__start) - -ENTRY(_real_start) - [ -- sp ] = reti; - p0.l = lo(WDOG_CTL); - p0.h = hi(WDOG_CTL); - r0 = 0xAD6(z); - w[p0] = r0; /* watchdog off for now */ - ssync; - - /* Code update for BSS size == 0 - * Zero out the bss region. - */ - - p1.l = ___bss_start; - p1.h = ___bss_start; - p2.l = ___bss_stop; - p2.h = ___bss_stop; - r0 = 0; - p2 -= p1; - lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; -.L_clear_bss: - B[p1++] = r0; - - /* In case there is a NULL pointer reference - * Zero out region before stext - */ - - p1.l = 0x0; - p1.h = 0x0; - r0.l = __stext; - r0.h = __stext; - r0 = r0 >> 1; - p2 = r0; - r0 = 0; - lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; -.L_clear_zero: - W[p1++] = r0; - - /* pass the uboot arguments to the global value command line */ - R0 = R7; - call _cmdline_init; - - p1.l = __rambase; - p1.h = __rambase; - r0.l = __sdata; - r0.h = __sdata; - [p1] = r0; - - p1.l = __ramstart; - p1.h = __ramstart; - p3.l = ___bss_stop; - p3.h = ___bss_stop; - - r1 = p3; - [p1] = r1; - - /* - * load the current thread pointer and stack - */ - r1.l = _init_thread_union; - r1.h = _init_thread_union; - - r2.l = 0x2000; - r2.h = 0x0000; - r1 = r1 + r2; - sp = r1; - usp = sp; - fp = sp; - jump.l _start_kernel; -ENDPROC(_real_start) - -__FINIT - .section .l1.text #ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) @@ -452,13 +138,6 @@ ENTRY(_start_dma_code) [P2] = R1; SSYNC; - p0.h = hi(SIC_IWR); - p0.l = lo(SIC_IWR); - r0.l = lo(IWR_ENABLE_ALL); - r0.h = hi(IWR_ENABLE_ALL); - [p0] = r0; - SSYNC; - RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-bf537/ints-priority.c b/arch/blackfin/mach-bf537/ints-priority.c index a8b915f202e..b1300b3f181 100644 --- a/arch/blackfin/mach-bf537/ints-priority.c +++ b/arch/blackfin/mach-bf537/ints-priority.c @@ -31,7 +31,7 @@ #include <linux/irq.h> #include <asm/blackfin.h> -void program_IAR(void) +void __init program_IAR(void) { /* Program the IAR0 Register with the configured priority */ bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) | diff --git a/arch/blackfin/mach-bf548/boards/cm_bf548.c b/arch/blackfin/mach-bf548/boards/cm_bf548.c index 4f4ae8787ed..58abbed0a22 100644 --- a/arch/blackfin/mach-bf548/boards/cm_bf548.c +++ b/arch/blackfin/mach-bf548/boards/cm_bf548.c @@ -319,12 +319,12 @@ static struct platform_device bfin_atapi_device = { #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) static struct mtd_partition partition_info[] = { { - .name = "Linux Kernel", + .name = "linux kernel(nand)", .offset = 0, .size = 4 * SIZE_1M, }, { - .name = "File System", + .name = "file system(nand)", .offset = 4 * SIZE_1M, .size = (256 - 4) * SIZE_1M, }, @@ -377,12 +377,12 @@ static struct platform_device bf54x_sdh_device = { /* SPI flash chip (m25p16) */ static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "linux kernel", + .name = "linux kernel(spi)", .size = 0x1c0000, .offset = 0x40000 } diff --git a/arch/blackfin/mach-bf548/boards/ezkit.c b/arch/blackfin/mach-bf548/boards/ezkit.c index 166fa2201ee..0d6333ada1d 100644 --- a/arch/blackfin/mach-bf548/boards/ezkit.c +++ b/arch/blackfin/mach-bf548/boards/ezkit.c @@ -365,12 +365,12 @@ static struct platform_device bfin_atapi_device = { #if defined(CONFIG_MTD_NAND_BF5XX) || defined(CONFIG_MTD_NAND_BF5XX_MODULE) static struct mtd_partition partition_info[] = { { - .name = "Linux Kernel", + .name = "linux kernel(nand)", .offset = 0, .size = 4 * SIZE_1M, }, { - .name = "File System", + .name = "file system(nand)", .offset = MTDPART_OFS_APPEND, .size = MTDPART_SIZ_FULL, }, @@ -419,15 +419,15 @@ static struct platform_device bf54x_sdh_device = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition ezkit_partitions[] = { { - .name = "Bootloader", + .name = "bootloader(nor)", .size = 0x40000, .offset = 0, }, { - .name = "Kernel", + .name = "linux kernel(nor)", .size = 0x1C0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "RootFS", + .name = "file system(nor)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -461,12 +461,12 @@ static struct platform_device ezkit_flash_device = { /* SPI flash chip (m25p16) */ static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00040000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "linux kernel", + .name = "linux kernel(spi)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } diff --git a/arch/blackfin/mach-bf548/head.S b/arch/blackfin/mach-bf548/head.S index 06b9178cfcf..e3000f70a26 100644 --- a/arch/blackfin/mach-bf548/head.S +++ b/arch/blackfin/mach-bf548/head.S @@ -30,263 +30,11 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/blackfin.h> -#include <asm/trace.h> #ifdef CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif -.extern ___bss_stop -.extern ___bss_start -.extern _bf53x_relocate_l1_mem - -#define INITIAL_STACK 0xFFB01000 - -__INIT - -ENTRY(__start) - /* R0: argument of command line string, passed from uboot, save it */ - R7 = R0; - /* Enable Cycle Counter and Nesting Of Interrupts */ -#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES - R0 = SYSCFG_SNEN; -#else - R0 = SYSCFG_SNEN | SYSCFG_CCEN; -#endif - SYSCFG = R0; - R0 = 0; - - /* Clear Out All the data and pointer Registers*/ - R1 = R0; - R2 = R0; - R3 = R0; - R4 = R0; - R5 = R0; - R6 = R0; - - P0 = R0; - P1 = R0; - P2 = R0; - P3 = R0; - P4 = R0; - P5 = R0; - - LC0 = r0; - LC1 = r0; - L0 = r0; - L1 = r0; - L2 = r0; - L3 = r0; - - /* Clear Out All the DAG Registers*/ - B0 = r0; - B1 = r0; - B2 = r0; - B3 = r0; - - I0 = r0; - I1 = r0; - I2 = r0; - I3 = r0; - - M0 = r0; - M1 = r0; - M2 = r0; - M3 = r0; - - trace_buffer_init(p0,r0); - P0 = R1; - R0 = R1; - - /* Turn off the icache */ - p0.l = LO(IMEM_CONTROL); - p0.h = HI(IMEM_CONTROL); - R1 = [p0]; - R0 = ~ENICPLB; - R0 = R0 & R1; - [p0] = R0; - SSYNC; - - /* Turn off the dcache */ - p0.l = LO(DMEM_CONTROL); - p0.h = HI(DMEM_CONTROL); - R1 = [p0]; - R0 = ~ENDCPLB; - R0 = R0 & R1; - [p0] = R0; - SSYNC; - - /* Initialize stack pointer */ - SP.L = LO(INITIAL_STACK); - SP.H = HI(INITIAL_STACK); - FP = SP; - USP = SP; - -#ifdef CONFIG_EARLY_PRINTK - SP += -12; - call _init_early_exception_vectors; - SP += 12; -#endif - - /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ - call _bf53x_relocate_l1_mem; -#ifdef CONFIG_BFIN_KERNEL_CLOCK - call _start_dma_code; -#endif - /* Code for initializing Async memory banks */ - - p2.h = hi(EBIU_AMBCTL1); - p2.l = lo(EBIU_AMBCTL1); - r0.h = hi(AMBCTL1VAL); - r0.l = lo(AMBCTL1VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMBCTL0); - p2.l = lo(EBIU_AMBCTL0); - r0.h = hi(AMBCTL0VAL); - r0.l = lo(AMBCTL0VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMGCTL); - p2.l = lo(EBIU_AMGCTL); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - p2.h = hi(EBIU_MBSCTL); - p2.l = lo(EBIU_MBSCTL); - r0.h = hi(CONFIG_EBIU_MBSCTLVAL); - r0.l = lo(CONFIG_EBIU_MBSCTLVAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_MODE); - p2.l = lo(EBIU_MODE); - r0.h = hi(CONFIG_EBIU_MODEVAL); - r0.l = lo(CONFIG_EBIU_MODEVAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_FCTL); - p2.l = lo(EBIU_FCTL); - r0.h = hi(CONFIG_EBIU_FCTLVAL); - r0.l = lo(CONFIG_EBIU_FCTLVAL); - [p2] = r0; - ssync; - - /* This section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* EVT15 = _real_start */ - - p0.l = lo(EVT15); - p0.h = hi(EVT15); - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - csync; - - p0.l = lo(IMASK); - p0.h = hi(IMASK); - p1.l = IMASK_IVG15; - p1.h = 0x0; - [p0] = p1; - csync; - - raise 15; - p0.l = .LWAIT_HERE; - p0.h = .LWAIT_HERE; - reti = p0; -#if ANOMALY_05000281 - nop; - nop; - nop; -#endif - rti; - -.LWAIT_HERE: - jump .LWAIT_HERE; -ENDPROC(__start) - -ENTRY(_real_start) - [ -- sp ] = reti; - p0.l = lo(WDOG_CTL); - p0.h = hi(WDOG_CTL); - r0 = 0xAD6(z); - w[p0] = r0; /* watchdog off for now */ - ssync; - - /* Code update for BSS size == 0 - * Zero out the bss region. - */ - - p1.l = ___bss_start; - p1.h = ___bss_start; - p2.l = ___bss_stop; - p2.h = ___bss_stop; - r0 = 0; - p2 -= p1; - lsetup (.L_clear_bss, .L_clear_bss ) lc0 = p2; -.L_clear_bss: - B[p1++] = r0; - - /* In case there is a NULL pointer reference - * Zero out region before stext - */ - - p1.l = 0x0; - p1.h = 0x0; - r0.l = __stext; - r0.h = __stext; - r0 = r0 >> 1; - p2 = r0; - r0 = 0; - lsetup (.L_clear_zero, .L_clear_zero ) lc0 = p2; -.L_clear_zero: - W[p1++] = r0; - - /* pass the uboot arguments to the global value command line */ - R0 = R7; - call _cmdline_init; - - p1.l = __rambase; - p1.h = __rambase; - r0.l = __sdata; - r0.h = __sdata; - [p1] = r0; - - p1.l = __ramstart; - p1.h = __ramstart; - p3.l = ___bss_stop; - p3.h = ___bss_stop; - - r1 = p3; - [p1] = r1; - - - /* - * load the current thread pointer and stack - */ - r1.l = _init_thread_union; - r1.h = _init_thread_union; - - r2.l = 0x2000; - r2.h = 0x0000; - r1 = r1 + r2; - sp = r1; - usp = sp; - fp = sp; - call _start_kernel; -.L_exit: - jump.s .L_exit; -ENDPROC(_real_start) - -__FINIT - .section .l1.text #ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) @@ -443,13 +191,6 @@ ENTRY(_start_dma_code) SSYNC; #endif - p0.h = hi(SIC_IWR0); - p0.l = lo(SIC_IWR0); - r0.l = lo(IWR_ENABLE_ALL); - r0.h = hi(IWR_ENABLE_ALL); - [p0] = r0; - SSYNC; - RTS; ENDPROC(_start_dma_code) #endif /* CONFIG_BFIN_KERNEL_CLOCK */ diff --git a/arch/blackfin/mach-bf548/ints-priority.c b/arch/blackfin/mach-bf548/ints-priority.c index 2665653cee3..9dd0fa3ac4d 100644 --- a/arch/blackfin/mach-bf548/ints-priority.c +++ b/arch/blackfin/mach-bf548/ints-priority.c @@ -31,7 +31,7 @@ #include <linux/irq.h> #include <asm/blackfin.h> -void program_IAR(void) +void __init program_IAR(void) { /* Program the IAR0 Register with the configured priority */ bfin_write_SIC_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) | diff --git a/arch/blackfin/mach-bf561/boards/cm_bf561.c b/arch/blackfin/mach-bf561/boards/cm_bf561.c index 466ef5929a2..8f40990eea2 100644 --- a/arch/blackfin/mach-bf561/boards/cm_bf561.c +++ b/arch/blackfin/mach-bf561/boards/cm_bf561.c @@ -54,16 +54,16 @@ const char bfin_board_name[] = "Bluetechnix CM BF561"; #if defined(CONFIG_MTD_M25P80) || defined(CONFIG_MTD_M25P80_MODULE) static struct mtd_partition bfin_spi_flash_partitions[] = { { - .name = "bootloader", + .name = "bootloader(spi)", .size = 0x00020000, .offset = 0, .mask_flags = MTD_CAP_ROM }, { - .name = "kernel", + .name = "linux kernel(spi)", .size = 0xe0000, .offset = 0x20000 }, { - .name = "file system", + .name = "file system(spi)", .size = 0x700000, .offset = 0x00100000, } @@ -306,7 +306,7 @@ static struct platform_device bfin_sir_device = { #endif #if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 119 +#define PATA_INT IRQ_PF46 static struct pata_platform_info bfin_pata_platform_data = { .ioport_shift = 2, diff --git a/arch/blackfin/mach-bf561/boards/ezkit.c b/arch/blackfin/mach-bf561/boards/ezkit.c index bc6feded856..50b4cdceccf 100644 --- a/arch/blackfin/mach-bf561/boards/ezkit.c +++ b/arch/blackfin/mach-bf561/boards/ezkit.c @@ -35,7 +35,6 @@ #include <linux/spi/spi.h> #include <linux/irq.h> #include <linux/interrupt.h> -#include <linux/ata_platform.h> #include <asm/dma.h> #include <asm/bfin5xx_spi.h> #include <asm/portmux.h> @@ -243,15 +242,15 @@ static struct platform_device bfin_sir_device = { #if defined(CONFIG_MTD_PHYSMAP) || defined(CONFIG_MTD_PHYSMAP_MODULE) static struct mtd_partition ezkit_partitions[] = { { - .name = "Bootloader", + .name = "bootloader(nor)", .size = 0x40000, .offset = 0, }, { - .name = "Kernel", + .name = "linux kernel(nor)", .size = 0x1C0000, .offset = MTDPART_OFS_APPEND, }, { - .name = "RootFS", + .name = "file system(nor)", .size = MTDPART_SIZ_FULL, .offset = MTDPART_OFS_APPEND, } @@ -350,43 +349,6 @@ static struct spi_board_info bfin_spi_board_info[] __initdata = { #endif }; -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) -#define PATA_INT 55 - -static struct pata_platform_info bfin_pata_platform_data = { - .ioport_shift = 1, - .irq_type = IRQF_TRIGGER_HIGH | IRQF_DISABLED, -}; - -static struct resource bfin_pata_resources[] = { - { - .start = 0x20314020, - .end = 0x2031403F, - .flags = IORESOURCE_MEM, - }, - { - .start = 0x2031401C, - .end = 0x2031401F, - .flags = IORESOURCE_MEM, - }, - { - .start = PATA_INT, - .end = PATA_INT, - .flags = IORESOURCE_IRQ, - }, -}; - -static struct platform_device bfin_pata_device = { - .name = "pata_platform", - .id = -1, - .num_resources = ARRAY_SIZE(bfin_pata_resources), - .resource = bfin_pata_resources, - .dev = { - .platform_data = &bfin_pata_platform_data, - } -}; -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) #include <linux/input.h> #include <linux/gpio_keys.h> @@ -499,10 +461,6 @@ static struct platform_device *ezkit_devices[] __initdata = { &bfin_sir_device, #endif -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - &bfin_pata_device, -#endif - #if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) &bfin_device_gpiokeys, #endif @@ -538,10 +496,6 @@ static int __init ezkit_init(void) #endif spi_register_board_info(bfin_spi_board_info, ARRAY_SIZE(bfin_spi_board_info)); - -#if defined(CONFIG_PATA_PLATFORM) || defined(CONFIG_PATA_PLATFORM_MODULE) - irq_desc[PATA_INT].status |= IRQ_NOAUTOEN; -#endif return 0; } diff --git a/arch/blackfin/mach-bf561/head.S b/arch/blackfin/mach-bf561/head.S index cf1a2dff01e..c7a81e34703 100644 --- a/arch/blackfin/mach-bf561/head.S +++ b/arch/blackfin/mach-bf561/head.S @@ -30,284 +30,13 @@ #include <linux/linkage.h> #include <linux/init.h> #include <asm/blackfin.h> -#include <asm/trace.h> - -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK #include <asm/mach-common/clocks.h> #include <asm/mach/mem_init.h> #endif -.extern ___bss_stop -.extern ___bss_start -.extern _bf53x_relocate_l1_mem - -#define INITIAL_STACK 0xFFB01000 - -__INIT - -ENTRY(__start) - /* R0: argument of command line string, passed from uboot, save it */ - R7 = R0; - /* Enable Cycle Counter and Nesting Of Interrupts */ -#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES - R0 = SYSCFG_SNEN; -#else - R0 = SYSCFG_SNEN | SYSCFG_CCEN; -#endif - SYSCFG = R0; - R0 = 0; - - /* Clear Out All the data and pointer Registers */ - R1 = R0; - R2 = R0; - R3 = R0; - R4 = R0; - R5 = R0; - R6 = R0; - - P0 = R0; - P1 = R0; - P2 = R0; - P3 = R0; - P4 = R0; - P5 = R0; - - LC0 = r0; - LC1 = r0; - L0 = r0; - L1 = r0; - L2 = r0; - L3 = r0; - - /* Clear Out All the DAG Registers */ - B0 = r0; - B1 = r0; - B2 = r0; - B3 = r0; - - I0 = r0; - I1 = r0; - I2 = r0; - I3 = r0; - - M0 = r0; - M1 = r0; - M2 = r0; - M3 = r0; - - trace_buffer_init(p0,r0); - P0 = R1; - R0 = R1; - - /* Turn off the icache */ - p0.l = LO(IMEM_CONTROL); - p0.h = HI(IMEM_CONTROL); - R1 = [p0]; - R0 = ~ENICPLB; - R0 = R0 & R1; - -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif - [p0] = R0; - SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif - - /* Turn off the dcache */ - p0.l = LO(DMEM_CONTROL); - p0.h = HI(DMEM_CONTROL); - R1 = [p0]; - R0 = ~ENDCPLB; - R0 = R0 & R1; - - /* Anomaly 05000125 */ -#if ANOMALY_05000125 - CLI R2; - SSYNC; -#endif - [p0] = R0; - SSYNC; -#if ANOMALY_05000125 - STI R2; -#endif - - /* Initialise UART - when booting from u-boot, the UART is not disabled - * so if we dont initalize here, our serial console gets hosed */ - p0.h = hi(BFIN_UART_LCR); - p0.l = lo(BFIN_UART_LCR); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable DLL writes */ - ssync; - - p0.h = hi(BFIN_UART_DLL); - p0.l = lo(BFIN_UART_DLL); - r0 = 0x0(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_DLH); - p0.l = lo(BFIN_UART_DLH); - r0 = 0x00(Z); - w[p0] = r0.L; - ssync; - - p0.h = hi(BFIN_UART_GCTL); - p0.l = lo(BFIN_UART_GCTL); - r0 = 0x0(Z); - w[p0] = r0.L; /* To enable UART clock */ - ssync; - - /* Initialize stack pointer */ - sp.l = lo(INITIAL_STACK); - sp.h = hi(INITIAL_STACK); - fp = sp; - usp = sp; - -#ifdef CONFIG_EARLY_PRINTK - SP += -12; - call _init_early_exception_vectors; - SP += 12; -#endif - - /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ - call _bf53x_relocate_l1_mem; -#if CONFIG_BFIN_KERNEL_CLOCK - call _start_dma_code; -#endif - - /* Code for initializing Async memory banks */ - - p2.h = hi(EBIU_AMBCTL1); - p2.l = lo(EBIU_AMBCTL1); - r0.h = hi(AMBCTL1VAL); - r0.l = lo(AMBCTL1VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMBCTL0); - p2.l = lo(EBIU_AMBCTL0); - r0.h = hi(AMBCTL0VAL); - r0.l = lo(AMBCTL0VAL); - [p2] = r0; - ssync; - - p2.h = hi(EBIU_AMGCTL); - p2.l = lo(EBIU_AMGCTL); - r0 = AMGCTLVAL; - w[p2] = r0; - ssync; - - /* This section keeps the processor in supervisor mode - * during kernel boot. Switches to user mode at end of boot. - * See page 3-9 of Hardware Reference manual for documentation. - */ - - /* EVT15 = _real_start */ - - p0.l = lo(EVT15); - p0.h = hi(EVT15); - p1.l = _real_start; - p1.h = _real_start; - [p0] = p1; - csync; - - p0.l = lo(IMASK); - p0.h = hi(IMASK); - p1.l = IMASK_IVG15; - p1.h = 0x0; - [p0] = p1; - csync; - - raise 15; - p0.l = .LWAIT_HERE; - p0.h = .LWAIT_HERE; - reti = p0; -#if ANOMALY_05000281 - nop; nop; nop; -#endif - rti; - -.LWAIT_HERE: - jump .LWAIT_HERE; -ENDPROC(__start) - -ENTRY(_real_start) - [ -- sp ] = reti; - p0.l = lo(WDOGA_CTL); - p0.h = hi(WDOGA_CTL); - r0 = 0xAD6(z); - w[p0] = r0; /* watchdog off for now */ - ssync; - - /* Code update for BSS size == 0 - * Zero out the bss region. - */ - - p1.l = ___bss_start; - p1.h = ___bss_start; - p2.l = ___bss_stop; - p2.h = ___bss_stop; - r0 = 0; - p2 -= p1; - lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; -.L_clear_bss: - B[p1++] = r0; - - /* In case there is a NULL pointer reference - * Zero out region before stext - */ - - p1.l = 0x0; - p1.h = 0x0; - r0.l = __stext; - r0.h = __stext; - r0 = r0 >> 1; - p2 = r0; - r0 = 0; - lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; -.L_clear_zero: - W[p1++] = r0; - - /* pass the uboot arguments to the global value command line */ - R0 = R7; - call _cmdline_init; - - p1.l = __rambase; - p1.h = __rambase; - r0.l = __sdata; - r0.h = __sdata; - [p1] = r0; - - p1.l = __ramstart; - p1.h = __ramstart; - p3.l = ___bss_stop; - p3.h = ___bss_stop; - - r1 = p3; - [p1] = r1; - - /* - * load the current thread pointer and stack - */ - r1.l = _init_thread_union; - r1.h = _init_thread_union; - - r2.l = 0x2000; - r2.h = 0x0000; - r1 = r1 + r2; - sp = r1; - usp = sp; - fp = sp; - jump.l _start_kernel; -ENDPROC(_real_start) - -__FINIT - .section .l1.text -#if CONFIG_BFIN_KERNEL_CLOCK +#ifdef CONFIG_BFIN_KERNEL_CLOCK ENTRY(_start_dma_code) p0.h = hi(SICA_IWR0); p0.l = lo(SICA_IWR0); diff --git a/arch/blackfin/mach-bf561/ints-priority.c b/arch/blackfin/mach-bf561/ints-priority.c index 09b541b0f7c..9d2f2334472 100644 --- a/arch/blackfin/mach-bf561/ints-priority.c +++ b/arch/blackfin/mach-bf561/ints-priority.c @@ -31,7 +31,7 @@ #include <linux/irq.h> #include <asm/blackfin.h> -void program_IAR(void) +void __init program_IAR(void) { /* Program the IAR0 Register with the configured priority */ bfin_write_SICA_IAR0(((CONFIG_IRQ_PLL_WAKEUP - 7) << IRQ_PLL_WAKEUP_POS) | diff --git a/arch/blackfin/mach-common/Makefile b/arch/blackfin/mach-common/Makefile index 422bfee34ad..e6ed57c56d4 100644 --- a/arch/blackfin/mach-common/Makefile +++ b/arch/blackfin/mach-common/Makefile @@ -3,9 +3,10 @@ # obj-y := \ - cache.o cacheinit.o entry.o \ - interrupt.o lock.o irqpanic.o arch_checks.o ints-priority.o + cache.o entry.o head.o \ + interrupt.o irqpanic.o arch_checks.o ints-priority.o +obj-$(CONFIG_BFIN_ICACHE_LOCK) += lock.o obj-$(CONFIG_PM) += pm.o dpmc_modes.o obj-$(CONFIG_CPU_FREQ) += cpufreq.o obj-$(CONFIG_CPU_VOLTAGE) += dpmc.o diff --git a/arch/blackfin/mach-common/arch_checks.c b/arch/blackfin/mach-common/arch_checks.c index f9160d83b91..5986758b275 100644 --- a/arch/blackfin/mach-common/arch_checks.c +++ b/arch/blackfin/mach-common/arch_checks.c @@ -27,6 +27,7 @@ * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA */ +#include <asm/fixed_code.h> #include <asm/mach/anomaly.h> #include <asm/mach-common/clocks.h> @@ -53,3 +54,11 @@ # endif #endif /* CONFIG_BFIN_KERNEL_CLOCK */ + +#if CONFIG_BOOT_LOAD < FIXED_CODE_END +# error "The kernel load address must be after the fixed code section" +#endif + +#if (CONFIG_BOOT_LOAD & 0x3) +# error "The kernel load address must be 4 byte aligned" +#endif diff --git a/arch/blackfin/mach-common/cache.S b/arch/blackfin/mach-common/cache.S index 0521b158820..85f8c79b3c3 100644 --- a/arch/blackfin/mach-common/cache.S +++ b/arch/blackfin/mach-common/cache.S @@ -34,81 +34,6 @@ #include <asm/cache.h> .text -.align 2 -ENTRY(_cache_invalidate) - - /* - * Icache or DcacheA or DcacheB Invalidation - * or any combination thereof - * R0 has bits - * CPLB_ENABLE_ICACHE_P,CPLB_ENABLE_DCACHE_P,CPLB_ENABLE_DCACHE2_P - * set as required - */ - [--SP] = R7; - - R7 = R0; - CC = BITTST(R7,CPLB_ENABLE_ICACHE_P); - IF !CC JUMP .Lno_icache; - [--SP] = RETS; - CALL _icache_invalidate; - RETS = [SP++]; -.Lno_icache: - CC = BITTST(R7,CPLB_ENABLE_DCACHE_P); - IF !CC JUMP .Lno_dcache_a; - R0 = 0; /* specifies bank A */ - [--SP] = RETS; - CALL _dcache_invalidate; - RETS = [SP++]; -.Lno_dcache_a: - CC = BITTST(R7,CPLB_ENABLE_DCACHE2_P); - IF !CC JUMP .Lno_dcache_b; - R0 = 0; - BITSET(R0, 23); /* specifies bank B */ - [--SP] = RETS; - CALL _dcache_invalidate; - RETS = [SP++]; -.Lno_dcache_b: - R7 = [SP++]; - RTS; -ENDPROC(_cache_invalidate) - -/* Invalidate the Entire Instruction cache by - * disabling IMC bit - */ -ENTRY(_icache_invalidate) -ENTRY(_invalidate_entire_icache) - [--SP] = ( R7:5); - - P0.L = LO(IMEM_CONTROL); - P0.H = HI(IMEM_CONTROL); - R7 = [P0]; - - /* Clear the IMC bit , All valid bits in the instruction - * cache are set to the invalid state - */ - BITCLR(R7,IMC_P); - CLI R6; - SSYNC; /* SSYNC required before invalidating cache. */ - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - /* Configures the instruction cache agian */ - R6 = (IMC | ENICPLB); - R7 = R7 | R6; - - CLI R6; - SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - ( R7:5) = [SP++]; - RTS; -ENDPROC(_invalidate_entire_icache) -ENDPROC(_icache_invalidate) /* * blackfin_cache_flush_range(start, end) @@ -190,46 +115,6 @@ ENTRY(_blackfin_dcache_invalidate_range) RTS; ENDPROC(_blackfin_dcache_invalidate_range) -/* Invalidate the Entire Data cache by - * clearing DMC[1:0] bits - */ -ENTRY(_invalidate_entire_dcache) -ENTRY(_dcache_invalidate) - [--SP] = ( R7:6); - - P0.L = LO(DMEM_CONTROL); - P0.H = HI(DMEM_CONTROL); - R7 = [P0]; - - /* Clear the DMC[1:0] bits, All valid bits in the data - * cache are set to the invalid state - */ - BITCLR(R7,DMC0_P); - BITCLR(R7,DMC1_P); - CLI R6; - SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - /* Configures the data cache again */ - - R6 = DMEM_CNTR; - R7 = R7 | R6; - - CLI R6; - SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ - .align 8; - [P0] = R7; - SSYNC; - STI R6; - - ( R7:6) = [SP++]; - RTS; -ENDPROC(_dcache_invalidate) -ENDPROC(_invalidate_entire_dcache) - ENTRY(_blackfin_dcache_flush_range) R2 = -L1_CACHE_BYTES; R2 = R0 & R2; diff --git a/arch/blackfin/mach-common/cacheinit.S b/arch/blackfin/mach-common/cacheinit.S deleted file mode 100644 index 22fada0c1cb..00000000000 --- a/arch/blackfin/mach-common/cacheinit.S +++ /dev/null @@ -1,77 +0,0 @@ -/* - * File: arch/blackfin/mach-common/cacheinit.S - * Based on: - * Author: LG Soft India - * - * Created: ? - * Description: cache initialization - * - * Modified: - * Copyright 2004-2006 Analog Devices Inc. - * - * Bugs: Enter bugs at http://blackfin.uclinux.org/ - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, see the file COPYING, or write - * to the Free Software Foundation, Inc., - * 51 Franklin St, Fifth Floor, Boston, MA 02110-1301 USA - */ - -/* This function sets up the data and instruction cache. The - * tables like icplb table, dcplb table and Page Descriptor table - * are defined in cplbtab.h. You can configure those tables for - * your suitable requirements - */ - -#include <linux/linkage.h> -#include <asm/blackfin.h> - -.text - -#if ANOMALY_05000125 -#if defined(CONFIG_BFIN_ICACHE) -ENTRY(_bfin_write_IMEM_CONTROL) - - /* Enable Instruction Cache */ - P0.l = LO(IMEM_CONTROL); - P0.h = HI(IMEM_CONTROL); - - /* Anomaly 05000125 */ - CLI R1; - SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ - .align 8; - [P0] = R0; - SSYNC; - STI R1; - RTS; - -ENDPROC(_bfin_write_IMEM_CONTROL) -#endif - -#if defined(CONFIG_BFIN_DCACHE) -ENTRY(_bfin_write_DMEM_CONTROL) - P0.l = LO(DMEM_CONTROL); - P0.h = HI(DMEM_CONTROL); - - CLI R1; - SSYNC; /* SSYNC required before writing to DMEM_CONTROL. */ - .align 8; - [P0] = R0; - SSYNC; - STI R1; - RTS; - -ENDPROC(_bfin_write_DMEM_CONTROL) -#endif - -#endif diff --git a/arch/blackfin/mach-common/dpmc_modes.S b/arch/blackfin/mach-common/dpmc_modes.S index 5e3f1d8a4fb..838b0b2ce9a 100644 --- a/arch/blackfin/mach-common/dpmc_modes.S +++ b/arch/blackfin/mach-common/dpmc_modes.S @@ -78,62 +78,6 @@ ENTRY(_hibernate_mode) jump .Lforever; ENDPROC(_hibernate_mode) -ENTRY(_deep_sleep) - [--SP] = ( R7:0, P5:0 ); - [--SP] = RETS; - - CLI R4; - - R0 = IWR_ENABLE(0); - R1 = IWR_DISABLE_ALL; - R2 = IWR_DISABLE_ALL; - - call _set_sic_iwr; - - call _set_dram_srfs; - - /* Clear all the interrupts,bits sticky */ - R0 = 0xFFFF (Z); - call _set_rtc_istat - - P0.H = hi(PLL_CTL); - P0.L = lo(PLL_CTL); - R0 = W[P0](z); - BITSET (R0, 5); - W[P0] = R0.L; - - call _test_pll_locked; - - SSYNC; - IDLE; - - call _unset_dram_srfs; - - call _test_pll_locked; - - R0 = IWR_ENABLE(0); - R1 = IWR_DISABLE_ALL; - R2 = IWR_DISABLE_ALL; - - call _set_sic_iwr; - - P0.H = hi(PLL_CTL); - P0.L = lo(PLL_CTL); - R0 = w[p0](z); - BITCLR (R0, 3); - BITCLR (R0, 5); - BITCLR (R0, 8); - w[p0] = R0; - IDLE; - call _test_pll_locked; - - STI R4; - - RETS = [SP++]; - ( R7:0, P5:0 ) = [SP++]; - RTS; -ENDPROC(_deep_sleep) - ENTRY(_sleep_deeper) [--SP] = ( R7:0, P5:0 ); [--SP] = RETS; diff --git a/arch/blackfin/mach-common/entry.S b/arch/blackfin/mach-common/entry.S index eceb484d90f..117c01c2c6b 100644 --- a/arch/blackfin/mach-common/entry.S +++ b/arch/blackfin/mach-common/entry.S @@ -158,14 +158,16 @@ ENTRY(_ex_single_step) cc = r7 == r6; if cc jump _bfin_return_from_exception; +#ifdef CONFIG_KGDB /* Don't do single step in hardware exception handler */ p5.l = lo(IPEND); p5.h = hi(IPEND); r6 = [p5]; + cc = bittst(r6, 4); + if cc jump _bfin_return_from_exception; cc = bittst(r6, 5); if cc jump _bfin_return_from_exception; -#ifdef CONFIG_KGDB /* skip single step if current interrupt priority is higher than * that of the first instruction, from which gdb starts single step */ r6 >>= 6; @@ -186,17 +188,27 @@ ENTRY(_ex_single_step) if cc jump .Ldo_single_step; r6 += -1; cc = r6 < r7; - if cc jump _bfin_return_from_exception; + if cc jump 1f; .Ldo_single_step: -#endif - +#else /* If we were in user mode, do the single step normally. */ + p5.l = lo(IPEND); + p5.h = hi(IPEND); r6 = [p5]; r7 = 0xffe0 (z); r7 = r7 & r6; cc = r7 == 0; - if cc jump 1f; + if !cc jump 1f; +#endif + /* Single stepping only a single instruction, so clear the trace + * bit here. */ + r7 = syscfg; + bitclr (r7, 0); + syscfg = R7; + jump _ex_trap_c; + +1: /* * We were in an interrupt handler. By convention, all of them save * SYSCFG with their first instruction, so by checking whether our @@ -224,15 +236,11 @@ ENTRY(_ex_single_step) cc = R7 == R6; if !cc jump _bfin_return_from_exception; -1: - /* Single stepping only a single instruction, so clear the trace - * bit here. */ r7 = syscfg; bitclr (r7, 0); syscfg = R7; - jump _ex_trap_c; - + /* Fall through to _bfin_return_from_exception. */ ENDPROC(_ex_single_step) ENTRY(_bfin_return_from_exception) @@ -1414,6 +1422,12 @@ ENTRY(_sys_call_table) .long _sys_semtimedop .long _sys_timerfd_settime .long _sys_timerfd_gettime + .long _sys_signalfd4 /* 360 */ + .long _sys_eventfd2 + .long _sys_epoll_create1 + .long _sys_dup3 + .long _sys_pipe2 + .long _sys_inotify_init1 /* 365 */ .rept NR_syscalls-(.-_sys_call_table)/4 .long _sys_ni_syscall diff --git a/arch/blackfin/mach-common/head.S b/arch/blackfin/mach-common/head.S new file mode 100644 index 00000000000..191b4e974c4 --- /dev/null +++ b/arch/blackfin/mach-common/head.S @@ -0,0 +1,207 @@ +/* + * Common Blackfin startup code + * + * Copyright 2004-2008 Analog Devices Inc. + * + * Enter bugs at http://blackfin.uclinux.org/ + * + * Licensed under the GPL-2 or later. + */ + +#include <linux/linkage.h> +#include <linux/init.h> +#include <asm/blackfin.h> +#include <asm/thread_info.h> +#include <asm/trace.h> + +__INIT + +#define INITIAL_STACK (L1_SCRATCH_START + L1_SCRATCH_LENGTH - 12) + +ENTRY(__start) + /* R0: argument of command line string, passed from uboot, save it */ + R7 = R0; + /* Enable Cycle Counter and Nesting Of Interrupts */ +#ifdef CONFIG_BFIN_SCRATCH_REG_CYCLES + R0 = SYSCFG_SNEN; +#else + R0 = SYSCFG_SNEN | SYSCFG_CCEN; +#endif + SYSCFG = R0; + R0 = 0; + + /* Clear Out All the data and pointer Registers */ + R1 = R0; + R2 = R0; + R3 = R0; + R4 = R0; + R5 = R0; + R6 = R0; + + P0 = R0; + P1 = R0; + P2 = R0; + P3 = R0; + P4 = R0; + P5 = R0; + + LC0 = r0; + LC1 = r0; + L0 = r0; + L1 = r0; + L2 = r0; + L3 = r0; + + /* Clear Out All the DAG Registers */ + B0 = r0; + B1 = r0; + B2 = r0; + B3 = r0; + + I0 = r0; + I1 = r0; + I2 = r0; + I3 = r0; + + M0 = r0; + M1 = r0; + M2 = r0; + M3 = r0; + + trace_buffer_init(p0,r0); + P0 = R1; + R0 = R1; + + /* Turn off the icache */ + p0.l = LO(IMEM_CONTROL); + p0.h = HI(IMEM_CONTROL); + R1 = [p0]; + R0 = ~ENICPLB; + R0 = R0 & R1; + [p0] = R0; + SSYNC; + + /* Turn off the dcache */ + p0.l = LO(DMEM_CONTROL); + p0.h = HI(DMEM_CONTROL); + R1 = [p0]; + R0 = ~ENDCPLB; + R0 = R0 & R1; + [p0] = R0; + SSYNC; + + /* Save RETX, in case of doublefault */ + p0.l = ___retx; + p0.h = ___retx; + R0 = RETX; + [P0] = R0; + + /* Initialize stack pointer */ + sp.l = lo(INITIAL_STACK); + sp.h = hi(INITIAL_STACK); + fp = sp; + usp = sp; + +#ifdef CONFIG_EARLY_PRINTK + call _init_early_exception_vectors; +#endif + + /* Put The Code for PLL Programming and SDRAM Programming in L1 ISRAM */ + call _bf53x_relocate_l1_mem; +#ifdef CONFIG_BFIN_KERNEL_CLOCK + call _start_dma_code; +#endif + + /* This section keeps the processor in supervisor mode + * during kernel boot. Switches to user mode at end of boot. + * See page 3-9 of Hardware Reference manual for documentation. + */ + + /* EVT15 = _real_start */ + + p0.l = lo(EVT15); + p0.h = hi(EVT15); + p1.l = _real_start; + p1.h = _real_start; + [p0] = p1; + csync; + + p0.l = lo(IMASK); + p0.h = hi(IMASK); + p1.l = IMASK_IVG15; + p1.h = 0x0; + [p0] = p1; + csync; + + raise 15; + p0.l = .LWAIT_HERE; + p0.h = .LWAIT_HERE; + reti = p0; +#if ANOMALY_05000281 + nop; nop; nop; +#endif + rti; + +.LWAIT_HERE: + jump .LWAIT_HERE; +ENDPROC(__start) + +/* A little BF561 glue ... */ +#ifndef WDOG_CTL +# define WDOG_CTL WDOGA_CTL +#endif + +ENTRY(_real_start) + /* Enable nested interrupts */ + [--sp] = reti; + + /* watchdog off for now */ + p0.l = lo(WDOG_CTL); + p0.h = hi(WDOG_CTL); + r0 = 0xAD6(z); + w[p0] = r0; + ssync; + + /* Zero out the bss region + * Note: this will fail if bss is 0 bytes ... + */ + r0 = 0 (z); + r1.l = ___bss_start; + r1.h = ___bss_start; + r2.l = ___bss_stop; + r2.h = ___bss_stop; + r2 = r2 - r1; + r2 >>= 2; + p1 = r1; + p2 = r2; + lsetup (.L_clear_bss, .L_clear_bss) lc0 = p2; +.L_clear_bss: + [p1++] = r0; + + /* In case there is a NULL pointer reference, + * zero out region before stext + */ + p1 = r0; + r2.l = __stext; + r2.h = __stext; + r2 >>= 2; + p2 = r2; + lsetup (.L_clear_zero, .L_clear_zero) lc0 = p2; +.L_clear_zero: + [p1++] = r0; + + /* Pass the u-boot arguments to the global value command line */ + R0 = R7; + call _cmdline_init; + + /* Load the current thread pointer and stack */ + sp.l = _init_thread_union; + sp.h = _init_thread_union; + p1 = THREAD_SIZE (z); + sp = sp + p1; + usp = sp; + fp = sp; + jump.l _start_kernel; +ENDPROC(_real_start) + +__FINIT diff --git a/arch/blackfin/mach-common/ints-priority.c b/arch/blackfin/mach-common/ints-priority.c index 64d746114e4..62f8883a5c2 100644 --- a/arch/blackfin/mach-common/ints-priority.c +++ b/arch/blackfin/mach-common/ints-priority.c @@ -71,6 +71,7 @@ atomic_t num_spurious; #ifdef CONFIG_PM unsigned long bfin_sic_iwr[3]; /* Up to 3 SIC_IWRx registers */ +unsigned vr_wakeup; #endif struct ivgx { @@ -184,17 +185,56 @@ static void bfin_internal_unmask_irq(unsigned int irq) #ifdef CONFIG_PM int bfin_internal_set_wake(unsigned int irq, unsigned int state) { - unsigned bank, bit; + unsigned bank, bit, wakeup = 0; unsigned long flags; bank = SIC_SYSIRQ(irq) / 32; bit = SIC_SYSIRQ(irq) % 32; + switch (irq) { +#ifdef IRQ_RTC + case IRQ_RTC: + wakeup |= WAKE; + break; +#endif +#ifdef IRQ_CAN0_RX + case IRQ_CAN0_RX: + wakeup |= CANWE; + break; +#endif +#ifdef IRQ_CAN1_RX + case IRQ_CAN1_RX: + wakeup |= CANWE; + break; +#endif +#ifdef IRQ_USB_INT0 + case IRQ_USB_INT0: + wakeup |= USBWE; + break; +#endif +#ifdef IRQ_KEY + case IRQ_KEY: + wakeup |= KPADWE; + break; +#endif +#ifdef IRQ_CNT + case IRQ_CNT: + wakeup |= ROTWE; + break; +#endif + default: + break; + } + local_irq_save(flags); - if (state) + if (state) { bfin_sic_iwr[bank] |= (1 << bit); - else + vr_wakeup |= wakeup; + + } else { bfin_sic_iwr[bank] &= ~(1 << bit); + vr_wakeup &= ~wakeup; + } local_irq_restore(flags); @@ -943,6 +983,11 @@ int __init init_arch_irq(void) local_irq_disable(); +#if defined(CONFIG_BF527) || defined(CONFIG_BF536) || defined(CONFIG_BF537) + /* Clear EMAC Interrupt Status bits so we can demux it later */ + bfin_write_EMAC_SYSTAT(-1); +#endif + #ifdef CONFIG_BF54x # ifdef CONFIG_PINTx_REASSIGN pint[0]->assign = CONFIG_PINT0_ASSIGN; @@ -1028,13 +1073,22 @@ int __init init_arch_irq(void) IMASK_IVG10 | IMASK_IVG9 | IMASK_IVG8 | IMASK_IVG7 | IMASK_IVGHW; #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) - bfin_write_SIC_IWR0(IWR_ENABLE_ALL); - bfin_write_SIC_IWR1(IWR_ENABLE_ALL); + bfin_write_SIC_IWR0(IWR_DISABLE_ALL); +#if defined(CONFIG_BF52x) + /* BF52x system reset does not properly reset SIC_IWR1 which + * will screw up the bootrom as it relies on MDMA0/1 waking it + * up from IDLE instructions. See this report for more info: + * http://blackfin.uclinux.org/gf/tracker/4323 + */ + bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11)); +#else + bfin_write_SIC_IWR1(IWR_DISABLE_ALL); +#endif # ifdef CONFIG_BF54x - bfin_write_SIC_IWR2(IWR_ENABLE_ALL); + bfin_write_SIC_IWR2(IWR_DISABLE_ALL); # endif #else - bfin_write_SIC_IWR(IWR_ENABLE_ALL); + bfin_write_SIC_IWR(IWR_DISABLE_ALL); #endif return 0; diff --git a/arch/blackfin/mach-common/lock.S b/arch/blackfin/mach-common/lock.S index 30b887e67dd..9daf01201e9 100644 --- a/arch/blackfin/mach-common/lock.S +++ b/arch/blackfin/mach-common/lock.S @@ -28,13 +28,10 @@ */ #include <linux/linkage.h> -#include <asm/cplb.h> #include <asm/blackfin.h> .text -#ifdef CONFIG_BFIN_ICACHE_LOCK - /* When you come here, it is assumed that * R0 - Which way to be locked */ @@ -189,18 +186,38 @@ ENTRY(_cache_lock) RTS; ENDPROC(_cache_lock) -#endif /* BFIN_ICACHE_LOCK */ - -/* Return the ILOC bits of IMEM_CONTROL +/* Invalidate the Entire Instruction cache by + * disabling IMC bit */ +ENTRY(_invalidate_entire_icache) + [--SP] = ( R7:5); -ENTRY(_read_iloc) - P1.H = HI(IMEM_CONTROL); - P1.L = LO(IMEM_CONTROL); - R1 = 0xF; - R0 = [P1]; - R0 = R0 >> 3; - R0 = R0 & R1; + P0.L = LO(IMEM_CONTROL); + P0.H = HI(IMEM_CONTROL); + R7 = [P0]; + + /* Clear the IMC bit , All valid bits in the instruction + * cache are set to the invalid state + */ + BITCLR(R7,IMC_P); + CLI R6; + SSYNC; /* SSYNC required before invalidating cache. */ + .align 8; + [P0] = R7; + SSYNC; + STI R6; + + /* Configures the instruction cache agian */ + R6 = (IMC | ENICPLB); + R7 = R7 | R6; + + CLI R6; + SSYNC; /* SSYNC required before writing to IMEM_CONTROL. */ + .align 8; + [P0] = R7; + SSYNC; + STI R6; + ( R7:5) = [SP++]; RTS; -ENDPROC(_read_iloc) +ENDPROC(_invalidate_entire_icache) diff --git a/arch/blackfin/mach-common/pm.c b/arch/blackfin/mach-common/pm.c index 4fe6a2366b1..e28c6af1f41 100644 --- a/arch/blackfin/mach-common/pm.c +++ b/arch/blackfin/mach-common/pm.c @@ -83,13 +83,22 @@ void bfin_pm_suspend_standby_enter(void) bfin_pm_standby_restore(); #if defined(CONFIG_BF54x) || defined(CONFIG_BF52x) || defined(CONFIG_BF561) - bfin_write_SIC_IWR0(IWR_ENABLE_ALL); - bfin_write_SIC_IWR1(IWR_ENABLE_ALL); + bfin_write_SIC_IWR0(IWR_DISABLE_ALL); +#if defined(CONFIG_BF52x) + /* BF52x system reset does not properly reset SIC_IWR1 which + * will screw up the bootrom as it relies on MDMA0/1 waking it + * up from IDLE instructions. See this report for more info: + * http://blackfin.uclinux.org/gf/tracker/4323 + */ + bfin_write_SIC_IWR1(IWR_ENABLE(10) | IWR_ENABLE(11)); +#else + bfin_write_SIC_IWR1(IWR_DISABLE_ALL); +#endif # ifdef CONFIG_BF54x - bfin_write_SIC_IWR2(IWR_ENABLE_ALL); + bfin_write_SIC_IWR2(IWR_DISABLE_ALL); # endif #else - bfin_write_SIC_IWR(IWR_ENABLE_ALL); + bfin_write_SIC_IWR(IWR_DISABLE_ALL); #endif local_irq_restore(flags); @@ -229,28 +238,12 @@ int bfin_pm_suspend_mem_enter(void) wakeup = bfin_read_VR_CTL() & ~FREQ; wakeup |= SCKELOW; - /* FIXME: merge this somehow with set_irq_wake */ -#ifdef CONFIG_PM_BFIN_WAKE_RTC - wakeup |= WAKE; -#endif #ifdef CONFIG_PM_BFIN_WAKE_PH6 wakeup |= PHYWE; #endif -#ifdef CONFIG_PM_BFIN_WAKE_CAN - wakeup |= CANWE; -#endif #ifdef CONFIG_PM_BFIN_WAKE_GP wakeup |= GPWE; #endif -#ifdef CONFIG_PM_BFIN_WAKE_USB - wakeup |= USBWE; -#endif -#ifdef CONFIG_PM_BFIN_WAKE_KEYPAD - wakeup |= KPADWE; -#endif -#ifdef CONFIG_PM_BFIN_WAKE_ROTARY - wakeup |= ROTWE; -#endif local_irq_save(flags); @@ -268,7 +261,7 @@ int bfin_pm_suspend_mem_enter(void) icache_disable(); bf53x_suspend_l1_mem(memptr); - do_hibernate(wakeup); /* Goodbye */ + do_hibernate(wakeup | vr_wakeup); /* Goodbye */ bf53x_resume_l1_mem(memptr); diff --git a/arch/blackfin/mm/blackfin_sram.c b/arch/blackfin/mm/blackfin_sram.c index 5af3c31c936..9d2be43ac3d 100644 --- a/arch/blackfin/mm/blackfin_sram.c +++ b/arch/blackfin/mm/blackfin_sram.c @@ -66,7 +66,7 @@ static struct sram_piece free_l1_data_B_sram_head, used_l1_data_B_sram_head; static struct sram_piece free_l1_inst_sram_head, used_l1_inst_sram_head; #endif -#ifdef L2_LENGTH +#if L2_LENGTH != 0 static struct sram_piece free_l2_sram_head, used_l2_sram_head; #endif @@ -175,7 +175,7 @@ static void __init l1_inst_sram_init(void) static void __init l2_sram_init(void) { -#ifdef L2_LENGTH +#if L2_LENGTH != 0 free_l2_sram_head.next = kmem_cache_alloc(sram_piece_cache, GFP_KERNEL); if (!free_l2_sram_head.next) { @@ -367,7 +367,7 @@ int sram_free(const void *addr) && addr < (void *)(L1_DATA_B_START + L1_DATA_B_LENGTH)) return l1_data_B_sram_free(addr); #endif -#ifdef L2_LENGTH +#if L2_LENGTH != 0 else if (addr >= (void *)L2_START && addr < (void *)(L2_START + L2_LENGTH)) return l2_sram_free(addr); @@ -604,7 +604,7 @@ int l1sram_free(const void *addr) void *l2_sram_alloc(size_t size) { -#ifdef L2_LENGTH +#if L2_LENGTH != 0 unsigned flags; void *addr; @@ -640,7 +640,7 @@ EXPORT_SYMBOL(l2_sram_zalloc); int l2_sram_free(const void *addr) { -#ifdef L2_LENGTH +#if L2_LENGTH != 0 unsigned flags; int ret; @@ -779,7 +779,7 @@ static int sram_proc_read(char *buf, char **start, off_t offset, int count, &free_l1_inst_sram_head, &used_l1_inst_sram_head)) goto not_done; #endif -#ifdef L2_LENGTH +#if L2_LENGTH != 0 if (_sram_proc_read(buf, &len, count, "L2", &free_l2_sram_head, &used_l2_sram_head)) goto not_done; diff --git a/arch/ia64/include/asm/kexec.h b/arch/ia64/include/asm/kexec.h index 541be835fc5..e1d58f819d7 100644 --- a/arch/ia64/include/asm/kexec.h +++ b/arch/ia64/include/asm/kexec.h @@ -9,7 +9,7 @@ /* Maximum address we can use for the control code buffer */ #define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE -#define KEXEC_CONTROL_CODE_SIZE (8192 + 8192 + 4096) +#define KEXEC_CONTROL_PAGE_SIZE (8192 + 8192 + 4096) /* The native architecture */ #define KEXEC_ARCH KEXEC_ARCH_IA_64 diff --git a/arch/powerpc/include/asm/kexec.h b/arch/powerpc/include/asm/kexec.h index acdcdc66f1b..3736d9b3328 100644 --- a/arch/powerpc/include/asm/kexec.h +++ b/arch/powerpc/include/asm/kexec.h @@ -22,7 +22,7 @@ #define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE #endif -#define KEXEC_CONTROL_CODE_SIZE 4096 +#define KEXEC_CONTROL_PAGE_SIZE 4096 /* The native architecture */ #ifdef __powerpc64__ diff --git a/arch/powerpc/kernel/machine_kexec_32.c b/arch/powerpc/kernel/machine_kexec_32.c index cbaa3419679..ae63a964b85 100644 --- a/arch/powerpc/kernel/machine_kexec_32.c +++ b/arch/powerpc/kernel/machine_kexec_32.c @@ -51,7 +51,7 @@ void default_machine_kexec(struct kimage *image) relocate_new_kernel_size); flush_icache_range(reboot_code_buffer, - reboot_code_buffer + KEXEC_CONTROL_CODE_SIZE); + reboot_code_buffer + KEXEC_CONTROL_PAGE_SIZE); printk(KERN_INFO "Bye!\n"); /* now call it */ diff --git a/arch/s390/include/asm/kexec.h b/arch/s390/include/asm/kexec.h index f219c6411e0..bb729b84a21 100644 --- a/arch/s390/include/asm/kexec.h +++ b/arch/s390/include/asm/kexec.h @@ -31,7 +31,7 @@ #define KEXEC_CONTROL_MEMORY_LIMIT (1UL<<31) /* Allocate one page for the pdp and the second for the code */ -#define KEXEC_CONTROL_CODE_SIZE 4096 +#define KEXEC_CONTROL_PAGE_SIZE 4096 /* The native architecture */ #define KEXEC_ARCH KEXEC_ARCH_S390 diff --git a/arch/sh/include/asm/kexec.h b/arch/sh/include/asm/kexec.h index 00f4260ef09..765a5e1660f 100644 --- a/arch/sh/include/asm/kexec.h +++ b/arch/sh/include/asm/kexec.h @@ -21,7 +21,7 @@ /* Maximum address we can use for the control code buffer */ #define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE -#define KEXEC_CONTROL_CODE_SIZE 4096 +#define KEXEC_CONTROL_PAGE_SIZE 4096 /* The native architecture */ #define KEXEC_ARCH KEXEC_ARCH_SH diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index ac2fb0641a0..68d91c8233f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -951,9 +951,9 @@ config NUMA local memory controller of the CPU and add some more NUMA awareness to the kernel. - For i386 this is currently highly experimental and should be only + For 32-bit this is currently highly experimental and should be only used for kernel development. It might also cause boot failures. - For x86_64 this is recommended on all multiprocessor Opteron systems. + For 64-bit this is recommended on all multiprocessor Opteron systems. If the system is EM64T, you should say N unless your system is EM64T NUMA. @@ -1263,7 +1263,7 @@ config KEXEC strongly in flux, so no good recommendation can be made. config CRASH_DUMP - bool "kernel crash dumps (EXPERIMENTAL)" + bool "kernel crash dumps" depends on X86_64 || (X86_32 && HIGHMEM) help Generate crash dump after being started by kexec. diff --git a/arch/x86/boot/boot.h b/arch/x86/boot/boot.h index a34b9982c7c..616b804a229 100644 --- a/arch/x86/boot/boot.h +++ b/arch/x86/boot/boot.h @@ -24,6 +24,8 @@ #include <linux/edd.h> #include <asm/boot.h> #include <asm/setup.h> +#include "bitops.h" +#include <asm/cpufeature.h> /* Useful macros */ #define BUILD_BUG_ON(condition) ((void)sizeof(char[1 - 2*!!(condition)])) @@ -242,6 +244,12 @@ int cmdline_find_option(const char *option, char *buffer, int bufsize); int cmdline_find_option_bool(const char *option); /* cpu.c, cpucheck.c */ +struct cpu_features { + int level; /* Family, or 64 for x86-64 */ + int model; + u32 flags[NCAPINTS]; +}; +extern struct cpu_features cpu; int check_cpu(int *cpu_level_ptr, int *req_level_ptr, u32 **err_flags_ptr); int validate_cpu(void); diff --git a/arch/x86/boot/cpu.c b/arch/x86/boot/cpu.c index 92d6fd73dc7..75298fe2edc 100644 --- a/arch/x86/boot/cpu.c +++ b/arch/x86/boot/cpu.c @@ -16,9 +16,6 @@ */ #include "boot.h" -#include "bitops.h" -#include <asm/cpufeature.h> - #include "cpustr.h" static char *cpu_name(int level) diff --git a/arch/x86/boot/cpucheck.c b/arch/x86/boot/cpucheck.c index 7804389ee00..4b9ae7c5674 100644 --- a/arch/x86/boot/cpucheck.c +++ b/arch/x86/boot/cpucheck.c @@ -22,21 +22,13 @@ #ifdef _SETUP # include "boot.h" -# include "bitops.h" #endif #include <linux/types.h> -#include <asm/cpufeature.h> #include <asm/processor-flags.h> #include <asm/required-features.h> #include <asm/msr-index.h> -struct cpu_features { - int level; /* Family, or 64 for x86-64 */ - int model; - u32 flags[NCAPINTS]; -}; - -static struct cpu_features cpu; +struct cpu_features cpu; static u32 cpu_vendor[3]; static u32 err_flags[NCAPINTS]; diff --git a/arch/x86/boot/main.c b/arch/x86/boot/main.c index 2296164b54d..197421db1af 100644 --- a/arch/x86/boot/main.c +++ b/arch/x86/boot/main.c @@ -73,6 +73,11 @@ static void keyboard_set_repeat(void) */ static void query_ist(void) { + /* Some older BIOSes apparently crash on this call, so filter + it from machines too old to have SpeedStep at all. */ + if (cpu.level < 6) + return; + asm("int $0x15" : "=a" (boot_params.ist_info.signature), "=b" (boot_params.ist_info.command), diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index fa88a1d7129..bfd10fd211c 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -97,6 +97,8 @@ static u64 acpi_lapic_addr __initdata = APIC_DEFAULT_PHYS_BASE; #warning ACPI uses CMPXCHG, i486 and later hardware #endif +static int acpi_mcfg_64bit_base_addr __initdata = FALSE; + /* -------------------------------------------------------------------------- Boot-time Configuration -------------------------------------------------------------------------- */ @@ -158,6 +160,14 @@ char *__init __acpi_map_table(unsigned long phys, unsigned long size) struct acpi_mcfg_allocation *pci_mmcfg_config; int pci_mmcfg_config_num; +static int __init acpi_mcfg_oem_check(struct acpi_table_mcfg *mcfg) +{ + if (!strcmp(mcfg->header.oem_id, "SGI")) + acpi_mcfg_64bit_base_addr = TRUE; + + return 0; +} + int __init acpi_parse_mcfg(struct acpi_table_header *header) { struct acpi_table_mcfg *mcfg; @@ -190,8 +200,12 @@ int __init acpi_parse_mcfg(struct acpi_table_header *header) } memcpy(pci_mmcfg_config, &mcfg[1], config_size); + + acpi_mcfg_oem_check(mcfg); + for (i = 0; i < pci_mmcfg_config_num; ++i) { - if (pci_mmcfg_config[i].address > 0xFFFFFFFF) { + if ((pci_mmcfg_config[i].address > 0xFFFFFFFF) && + !acpi_mcfg_64bit_base_addr) { printk(KERN_ERR PREFIX "MMCONFIG not in low 4GB of memory\n"); kfree(pci_mmcfg_config); diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index fa2161d5003..81e5ab6542d 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -20,7 +20,7 @@ unsigned long acpi_realmode_flags; /* address in low memory of the wakeup routine. */ static unsigned long acpi_realmode; -#ifdef CONFIG_64BIT +#if defined(CONFIG_SMP) && defined(CONFIG_64BIT) static char temp_stack[10240]; #endif diff --git a/arch/x86/kernel/amd_iommu.c b/arch/x86/kernel/amd_iommu.c index 22d7d050905..de39e1f2ede 100644 --- a/arch/x86/kernel/amd_iommu.c +++ b/arch/x86/kernel/amd_iommu.c @@ -101,16 +101,13 @@ static int iommu_queue_command(struct amd_iommu *iommu, struct iommu_cmd *cmd) */ static int iommu_completion_wait(struct amd_iommu *iommu) { - int ret; + int ret, ready = 0; + unsigned status = 0; struct iommu_cmd cmd; - volatile u64 ready = 0; - unsigned long ready_phys = virt_to_phys(&ready); unsigned long i = 0; memset(&cmd, 0, sizeof(cmd)); - cmd.data[0] = LOW_U32(ready_phys) | CMD_COMPL_WAIT_STORE_MASK; - cmd.data[1] = upper_32_bits(ready_phys); - cmd.data[2] = 1; /* value written to 'ready' */ + cmd.data[0] = CMD_COMPL_WAIT_INT_MASK; CMD_SET_TYPE(&cmd, CMD_COMPL_WAIT); iommu->need_sync = 0; @@ -122,9 +119,15 @@ static int iommu_completion_wait(struct amd_iommu *iommu) while (!ready && (i < EXIT_LOOP_COUNT)) { ++i; - cpu_relax(); + /* wait for the bit to become one */ + status = readl(iommu->mmio_base + MMIO_STATUS_OFFSET); + ready = status & MMIO_STATUS_COM_WAIT_INT_MASK; } + /* set bit back to zero */ + status &= ~MMIO_STATUS_COM_WAIT_INT_MASK; + writel(status, iommu->mmio_base + MMIO_STATUS_OFFSET); + if (unlikely((i == EXIT_LOOP_COUNT) && printk_ratelimit())) printk(KERN_WARNING "AMD IOMMU: Completion wait loop failed\n"); @@ -161,7 +164,7 @@ static int iommu_queue_inv_iommu_pages(struct amd_iommu *iommu, address &= PAGE_MASK; CMD_SET_TYPE(&cmd, CMD_INV_IOMMU_PAGES); cmd.data[1] |= domid; - cmd.data[2] = LOW_U32(address); + cmd.data[2] = lower_32_bits(address); cmd.data[3] = upper_32_bits(address); if (s) /* size bit - we flush more than one 4kb page */ cmd.data[2] |= CMD_INV_IOMMU_PAGES_SIZE_MASK; diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index d9a9da597e7..a69cc0f5204 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -801,6 +801,21 @@ static int __init init_memory_definitions(struct acpi_table_header *table) } /* + * Init the device table to not allow DMA access for devices and + * suppress all page faults + */ +static void init_device_table(void) +{ + u16 devid; + + for (devid = 0; devid <= amd_iommu_last_bdf; ++devid) { + set_dev_entry_bit(devid, DEV_ENTRY_VALID); + set_dev_entry_bit(devid, DEV_ENTRY_TRANSLATION); + set_dev_entry_bit(devid, DEV_ENTRY_NO_PAGE_FAULT); + } +} + +/* * This function finally enables all IOMMUs found in the system after * they have been initialized */ @@ -931,6 +946,9 @@ int __init amd_iommu_init(void) if (amd_iommu_pd_alloc_bitmap == NULL) goto free; + /* init the device table */ + init_device_table(); + /* * let all alias entries point to itself */ @@ -954,15 +972,15 @@ int __init amd_iommu_init(void) if (acpi_table_parse("IVRS", init_memory_definitions) != 0) goto free; - ret = amd_iommu_init_dma_ops(); + ret = sysdev_class_register(&amd_iommu_sysdev_class); if (ret) goto free; - ret = sysdev_class_register(&amd_iommu_sysdev_class); + ret = sysdev_register(&device_amd_iommu); if (ret) goto free; - ret = sysdev_register(&device_amd_iommu); + ret = amd_iommu_init_dma_ops(); if (ret) goto free; diff --git a/arch/x86/kernel/apic_32.c b/arch/x86/kernel/apic_32.c index 039a8d4aaf6..f88bd0d982b 100644 --- a/arch/x86/kernel/apic_32.c +++ b/arch/x86/kernel/apic_32.c @@ -1454,8 +1454,6 @@ void disconnect_bsp_APIC(int virt_wire_setup) } } -unsigned int __cpuinitdata maxcpus = NR_CPUS; - void __cpuinit generic_processor_info(int apicid, int version) { int cpu; @@ -1482,12 +1480,6 @@ void __cpuinit generic_processor_info(int apicid, int version) return; } - if (num_processors >= maxcpus) { - printk(KERN_WARNING "WARNING: maxcpus limit of %i reached." - " Processor ignored.\n", maxcpus); - return; - } - num_processors++; cpus_complement(tmp_map, cpu_present_map); cpu = first_cpu(tmp_map); diff --git a/arch/x86/kernel/apic_64.c b/arch/x86/kernel/apic_64.c index 7f1f030da7e..446c062e831 100644 --- a/arch/x86/kernel/apic_64.c +++ b/arch/x86/kernel/apic_64.c @@ -90,7 +90,6 @@ static unsigned long apic_phys; unsigned long mp_lapic_addr; -unsigned int __cpuinitdata maxcpus = NR_CPUS; /* * Get the LAPIC version */ @@ -1062,12 +1061,6 @@ void __cpuinit generic_processor_info(int apicid, int version) return; } - if (num_processors >= maxcpus) { - printk(KERN_WARNING "WARNING: maxcpus limit of %i reached." - " Processor ignored.\n", maxcpus); - return; - } - num_processors++; cpus_complement(tmp_map, cpu_present_map); cpu = first_cpu(tmp_map); diff --git a/arch/x86/kernel/cpu/perfctr-watchdog.c b/arch/x86/kernel/cpu/perfctr-watchdog.c index de7439f82b9..05cc22dbd4f 100644 --- a/arch/x86/kernel/cpu/perfctr-watchdog.c +++ b/arch/x86/kernel/cpu/perfctr-watchdog.c @@ -478,7 +478,13 @@ static int setup_p4_watchdog(unsigned nmi_hz) perfctr_msr = MSR_P4_IQ_PERFCTR1; evntsel_msr = MSR_P4_CRU_ESCR0; cccr_msr = MSR_P4_IQ_CCCR1; - cccr_val = P4_CCCR_OVF_PMI1 | P4_CCCR_ESCR_SELECT(4); + + /* Pentium 4 D processors don't support P4_CCCR_OVF_PMI1 */ + if (boot_cpu_data.x86_model == 4 && boot_cpu_data.x86_mask == 4) + cccr_val = P4_CCCR_OVF_PMI0; + else + cccr_val = P4_CCCR_OVF_PMI1; + cccr_val |= P4_CCCR_ESCR_SELECT(4); } evntsel = P4_ESCR_EVENT_SELECT(0x3F) diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c index 2cfcbded888..2d7e307c777 100644 --- a/arch/x86/kernel/genx2apic_uv_x.c +++ b/arch/x86/kernel/genx2apic_uv_x.c @@ -222,7 +222,7 @@ static __init void map_low_mmrs(void) enum map_type {map_wb, map_uc}; -static void map_high(char *id, unsigned long base, int shift, enum map_type map_type) +static __init void map_high(char *id, unsigned long base, int shift, enum map_type map_type) { unsigned long bytes, paddr; diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index 1b318e903bf..9bfc4d72fb2 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -88,6 +88,7 @@ void __init x86_64_start_kernel(char * real_mode_data) BUILD_BUG_ON(!(MODULES_VADDR > __START_KERNEL)); BUILD_BUG_ON(!(((MODULES_END - 1) & PGDIR_MASK) == (__START_KERNEL & PGDIR_MASK))); + BUILD_BUG_ON(__fix_to_virt(__end_of_fixed_addresses) <= MODULES_END); /* clear bss before set_intr_gate with early_idt_handler */ clear_bss(); diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index ad2b15a1334..59fd3b6b130 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -359,6 +359,7 @@ static int hpet_clocksource_register(void) int __init hpet_enable(void) { unsigned long id; + int i; if (!is_hpet_capable()) return 0; @@ -369,6 +370,29 @@ int __init hpet_enable(void) * Read the period and check for a sane value: */ hpet_period = hpet_readl(HPET_PERIOD); + + /* + * AMD SB700 based systems with spread spectrum enabled use a + * SMM based HPET emulation to provide proper frequency + * setting. The SMM code is initialized with the first HPET + * register access and takes some time to complete. During + * this time the config register reads 0xffffffff. We check + * for max. 1000 loops whether the config register reads a non + * 0xffffffff value to make sure that HPET is up and running + * before we go further. A counting loop is safe, as the HPET + * access takes thousands of CPU cycles. On non SB700 based + * machines this check is only done once and has no side + * effects. + */ + for (i = 0; hpet_readl(HPET_CFG) == 0xFFFFFFFF; i++) { + if (i == 1000) { + printk(KERN_WARNING + "HPET config register value = 0xFFFFFFFF. " + "Disabling HPET\n"); + goto out_nohpet; + } + } + if (hpet_period < HPET_MIN_PERIOD || hpet_period > HPET_MAX_PERIOD) goto out_nohpet; diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c index 9fe478d9840..0732adba05c 100644 --- a/arch/x86/kernel/machine_kexec_32.c +++ b/arch/x86/kernel/machine_kexec_32.c @@ -12,6 +12,7 @@ #include <linux/init.h> #include <linux/numa.h> #include <linux/ftrace.h> +#include <linux/suspend.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> @@ -78,7 +79,7 @@ static void load_segments(void) /* * A architecture hook called to validate the * proposed image and prepare the control pages - * as needed. The pages for KEXEC_CONTROL_CODE_SIZE + * as needed. The pages for KEXEC_CONTROL_PAGE_SIZE * have been allocated, but the segments have yet * been copied into the kernel. * @@ -113,6 +114,7 @@ void machine_kexec(struct kimage *image) { unsigned long page_list[PAGES_NR]; void *control_page; + int save_ftrace_enabled; asmlinkage unsigned long (*relocate_kernel_ptr)(unsigned long indirection_page, unsigned long control_page, @@ -120,7 +122,12 @@ void machine_kexec(struct kimage *image) unsigned int has_pae, unsigned int preserve_context); - tracer_disable(); +#ifdef CONFIG_KEXEC_JUMP + if (kexec_image->preserve_context) + save_processor_state(); +#endif + + save_ftrace_enabled = __ftrace_enabled_save(); /* Interrupts aren't acceptable while we reboot */ local_irq_disable(); @@ -138,7 +145,7 @@ void machine_kexec(struct kimage *image) } control_page = page_address(image->control_code_page); - memcpy(control_page, relocate_kernel, PAGE_SIZE/2); + memcpy(control_page, relocate_kernel, KEXEC_CONTROL_CODE_MAX_SIZE); relocate_kernel_ptr = control_page; page_list[PA_CONTROL_PAGE] = __pa(control_page); @@ -178,6 +185,13 @@ void machine_kexec(struct kimage *image) (unsigned long)page_list, image->start, cpu_has_pae, image->preserve_context); + +#ifdef CONFIG_KEXEC_JUMP + if (kexec_image->preserve_context) + restore_processor_state(); +#endif + + __ftrace_enabled_restore(save_ftrace_enabled); } void arch_crash_save_vmcoreinfo(void) diff --git a/arch/x86/kernel/mfgpt_32.c b/arch/x86/kernel/mfgpt_32.c index 07c0f828f48..3b599518c32 100644 --- a/arch/x86/kernel/mfgpt_32.c +++ b/arch/x86/kernel/mfgpt_32.c @@ -33,6 +33,8 @@ #include <linux/module.h> #include <asm/geode.h> +#define MFGPT_DEFAULT_IRQ 7 + static struct mfgpt_timer_t { unsigned int avail:1; } mfgpt_timers[MFGPT_MAX_TIMERS]; @@ -157,29 +159,48 @@ int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable) } EXPORT_SYMBOL_GPL(geode_mfgpt_toggle_event); -int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable) +int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable) { - u32 val, dummy; - int offset; + u32 zsel, lpc, dummy; + int shift; if (timer < 0 || timer >= MFGPT_MAX_TIMERS) return -EIO; - if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable)) + /* + * Unfortunately, MFGPTs come in pairs sharing their IRQ lines. If VSA + * is using the same CMP of the timer's Siamese twin, the IRQ is set to + * 2, and we mustn't use nor change it. + * XXX: Likewise, 2 Linux drivers might clash if the 2nd overwrites the + * IRQ of the 1st. This can only happen if forcing an IRQ, calling this + * with *irq==0 is safe. Currently there _are_ no 2 drivers. + */ + rdmsr(MSR_PIC_ZSEL_LOW, zsel, dummy); + shift = ((cmp == MFGPT_CMP1 ? 0 : 4) + timer % 4) * 4; + if (((zsel >> shift) & 0xF) == 2) return -EIO; - rdmsr(MSR_PIC_ZSEL_LOW, val, dummy); + /* Choose IRQ: if none supplied, keep IRQ already set or use default */ + if (!*irq) + *irq = (zsel >> shift) & 0xF; + if (!*irq) + *irq = MFGPT_DEFAULT_IRQ; - offset = (timer % 4) * 4; - - val &= ~((0xF << offset) | (0xF << (offset + 16))); + /* Can't use IRQ if it's 0 (=disabled), 2, or routed to LPC */ + if (*irq < 1 || *irq == 2 || *irq > 15) + return -EIO; + rdmsr(MSR_PIC_IRQM_LPC, lpc, dummy); + if (lpc & (1 << *irq)) + return -EIO; + /* All chosen and checked - go for it */ + if (geode_mfgpt_toggle_event(timer, cmp, MFGPT_EVENT_IRQ, enable)) + return -EIO; if (enable) { - val |= (irq & 0x0F) << (offset); - val |= (irq & 0x0F) << (offset + 16); + zsel = (zsel & ~(0xF << shift)) | (*irq << shift); + wrmsr(MSR_PIC_ZSEL_LOW, zsel, dummy); } - wrmsr(MSR_PIC_ZSEL_LOW, val, dummy); return 0; } @@ -242,7 +263,7 @@ EXPORT_SYMBOL_GPL(geode_mfgpt_alloc_timer); static unsigned int mfgpt_tick_mode = CLOCK_EVT_MODE_SHUTDOWN; static u16 mfgpt_event_clock; -static int irq = 7; +static int irq; static int __init mfgpt_setup(char *str) { get_option(&str, &irq); @@ -346,7 +367,7 @@ int __init mfgpt_timer_setup(void) mfgpt_event_clock = timer; /* Set up the IRQ on the MFGPT side */ - if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, irq)) { + if (geode_mfgpt_setup_irq(mfgpt_event_clock, MFGPT_CMP2, &irq)) { printk(KERN_ERR "mfgpt-timer: Could not set up IRQ %d\n", irq); return -EIO; } @@ -374,13 +395,14 @@ int __init mfgpt_timer_setup(void) &mfgpt_clockevent); printk(KERN_INFO - "mfgpt-timer: registering the MFGPT timer as a clock event.\n"); + "mfgpt-timer: Registering MFGPT timer %d as a clock event, using IRQ %d\n", + timer, irq); clockevents_register_device(&mfgpt_clockevent); return 0; err: - geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, irq); + geode_mfgpt_release_irq(mfgpt_event_clock, MFGPT_CMP2, &irq); printk(KERN_ERR "mfgpt-timer: Unable to set up the MFGPT clock source\n"); return -EIO; diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c index 9fd80955244..e4393808688 100644 --- a/arch/x86/kernel/msr.c +++ b/arch/x86/kernel/msr.c @@ -131,7 +131,7 @@ static int msr_open(struct inode *inode, struct file *file) ret = -EIO; /* MSR not supported */ out: unlock_kernel(); - return 0; + return ret; } /* diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index ac6d51222e7..abb78a2cc4a 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -114,6 +114,23 @@ static __init void nmi_cpu_busy(void *data) } #endif +static void report_broken_nmi(int cpu, int *prev_nmi_count) +{ + printk(KERN_CONT "\n"); + + printk(KERN_WARNING + "WARNING: CPU#%d: NMI appears to be stuck (%d->%d)!\n", + cpu, prev_nmi_count[cpu], get_nmi_count(cpu)); + + printk(KERN_WARNING + "Please report this to bugzilla.kernel.org,\n"); + printk(KERN_WARNING + "and attach the output of the 'dmesg' command.\n"); + + per_cpu(wd_enabled, cpu) = 0; + atomic_dec(&nmi_active); +} + int __init check_nmi_watchdog(void) { unsigned int *prev_nmi_count; @@ -141,15 +158,8 @@ int __init check_nmi_watchdog(void) for_each_online_cpu(cpu) { if (!per_cpu(wd_enabled, cpu)) continue; - if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) { - printk(KERN_WARNING "WARNING: CPU#%d: NMI " - "appears to be stuck (%d->%d)!\n", - cpu, - prev_nmi_count[cpu], - get_nmi_count(cpu)); - per_cpu(wd_enabled, cpu) = 0; - atomic_dec(&nmi_active); - } + if (get_nmi_count(cpu) - prev_nmi_count[cpu] <= 5) + report_broken_nmi(cpu, prev_nmi_count); } endflag = 1; if (!atomic_read(&nmi_active)) { diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index 53bc653ed5c..3b7a1ddcc0b 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -95,7 +95,6 @@ static inline void play_dead(void) { /* This must be done before dead CPU ack */ cpu_exit_clear(); - wbinvd(); mb(); /* Ack it */ __get_cpu_var(cpu_state) = CPU_DEAD; @@ -104,8 +103,8 @@ static inline void play_dead(void) * With physical CPU hotplug, we should halt the cpu */ local_irq_disable(); - while (1) - halt(); + /* mask all interrupts, flush any and all caches, and halt */ + wbinvd_halt(); } #else static inline void play_dead(void) diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 3fb62a7d9a1..71553b664e2 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -93,14 +93,13 @@ DECLARE_PER_CPU(int, cpu_state); static inline void play_dead(void) { idle_task_exit(); - wbinvd(); mb(); /* Ack it */ __get_cpu_var(cpu_state) = CPU_DEAD; local_irq_disable(); - while (1) - halt(); + /* mask all interrupts, flush any and all caches, and halt */ + wbinvd_halt(); } #else static inline void play_dead(void) diff --git a/arch/x86/kernel/relocate_kernel_32.S b/arch/x86/kernel/relocate_kernel_32.S index 703310a9902..6f50664b2ba 100644 --- a/arch/x86/kernel/relocate_kernel_32.S +++ b/arch/x86/kernel/relocate_kernel_32.S @@ -20,10 +20,11 @@ #define PAGE_ATTR (_PAGE_PRESENT | _PAGE_RW | _PAGE_ACCESSED | _PAGE_DIRTY) #define PAE_PGD_ATTR (_PAGE_PRESENT) -/* control_page + PAGE_SIZE/2 ~ control_page + PAGE_SIZE * 3/4 are - * used to save some data for jumping back +/* control_page + KEXEC_CONTROL_CODE_MAX_SIZE + * ~ control_page + PAGE_SIZE are used as data storage and stack for + * jumping back */ -#define DATA(offset) (PAGE_SIZE/2+(offset)) +#define DATA(offset) (KEXEC_CONTROL_CODE_MAX_SIZE+(offset)) /* Minimal CPU state */ #define ESP DATA(0x0) @@ -376,3 +377,6 @@ swap_pages: popl %ebx popl %ebp ret + + .globl kexec_control_code_size +.set kexec_control_code_size, . - relocate_kernel diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index 68b48e3fbcb..a4656adab53 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -445,7 +445,7 @@ static void __init reserve_early_setup_data(void) * @size: Size of the crashkernel memory to reserve. * Returns the base address on success, and -1ULL on failure. */ -unsigned long long find_and_reserve_crashkernel(unsigned long long size) +unsigned long long __init find_and_reserve_crashkernel(unsigned long long size) { const unsigned long long alignment = 16<<20; /* 16M */ unsigned long long start = 0LL; diff --git a/arch/x86/kernel/signal_64.c b/arch/x86/kernel/signal_64.c index b45ef8ddd65..ca316b5b742 100644 --- a/arch/x86/kernel/signal_64.c +++ b/arch/x86/kernel/signal_64.c @@ -104,7 +104,16 @@ static inline int restore_i387(struct _fpstate __user *buf) clts(); task_thread_info(current)->status |= TS_USEDFPU; } - return restore_fpu_checking((__force struct i387_fxsave_struct *)buf); + err = restore_fpu_checking((__force struct i387_fxsave_struct *)buf); + if (unlikely(err)) { + /* + * Encountered an error while doing the restore from the + * user buffer, clear the fpu state. + */ + clear_fpu(tsk); + clear_used_math(); + } + return err; } /* diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index 91055d7fc1b..a8fb8a980fa 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -994,17 +994,7 @@ int __cpuinit native_cpu_up(unsigned int cpu) flush_tlb_all(); low_mappings = 1; -#ifdef CONFIG_X86_PC - if (def_to_bigsmp && apicid > 8) { - printk(KERN_WARNING - "More than 8 CPUs detected - skipping them.\n" - "Use CONFIG_X86_GENERICARCH and CONFIG_X86_BIGSMP.\n"); - err = -1; - } else - err = do_boot_cpu(apicid, cpu); -#else err = do_boot_cpu(apicid, cpu); -#endif zap_low_mappings(); low_mappings = 0; @@ -1058,6 +1048,34 @@ static __init void disable_smp(void) static int __init smp_sanity_check(unsigned max_cpus) { preempt_disable(); + +#if defined(CONFIG_X86_PC) && defined(CONFIG_X86_32) + if (def_to_bigsmp && nr_cpu_ids > 8) { + unsigned int cpu; + unsigned nr; + + printk(KERN_WARNING + "More than 8 CPUs detected - skipping them.\n" + "Use CONFIG_X86_GENERICARCH and CONFIG_X86_BIGSMP.\n"); + + nr = 0; + for_each_present_cpu(cpu) { + if (nr >= 8) + cpu_clear(cpu, cpu_present_map); + nr++; + } + + nr = 0; + for_each_possible_cpu(cpu) { + if (nr >= 8) + cpu_clear(cpu, cpu_possible_map); + nr++; + } + + nr_cpu_ids = 8; + } +#endif + if (!physid_isset(hard_smp_processor_id(), phys_cpu_present_map)) { printk(KERN_WARNING "weird, boot CPU (#%d) not listed" "by the BIOS.\n", hard_smp_processor_id()); @@ -1386,17 +1404,3 @@ void __cpu_die(unsigned int cpu) BUG(); } #endif - -/* - * If the BIOS enumerates physical processors before logical, - * maxcpus=N at enumeration-time can be used to disable HT. - */ -static int __init parse_maxcpus(char *arg) -{ - extern unsigned int maxcpus; - - if (arg) - maxcpus = simple_strtoul(arg, NULL, 0); - return 0; -} -early_param("maxcpus", parse_maxcpus); diff --git a/arch/x86/kernel/smpcommon.c b/arch/x86/kernel/smpcommon.c index 99941b37eca..397e309839d 100644 --- a/arch/x86/kernel/smpcommon.c +++ b/arch/x86/kernel/smpcommon.c @@ -8,18 +8,21 @@ DEFINE_PER_CPU(unsigned long, this_cpu_off); EXPORT_PER_CPU_SYMBOL(this_cpu_off); -/* Initialize the CPU's GDT. This is either the boot CPU doing itself - (still using the master per-cpu area), or a CPU doing it for a - secondary which will soon come up. */ +/* + * Initialize the CPU's GDT. This is either the boot CPU doing itself + * (still using the master per-cpu area), or a CPU doing it for a + * secondary which will soon come up. + */ __cpuinit void init_gdt(int cpu) { - struct desc_struct *gdt = get_cpu_gdt_table(cpu); + struct desc_struct gdt; - pack_descriptor(&gdt[GDT_ENTRY_PERCPU], - __per_cpu_offset[cpu], 0xFFFFF, + pack_descriptor(&gdt, __per_cpu_offset[cpu], 0xFFFFF, 0x2 | DESCTYPE_S, 0x8); + gdt.s = 1; - gdt[GDT_ENTRY_PERCPU].s = 1; + write_gdt_entry(get_cpu_gdt_table(cpu), + GDT_ENTRY_PERCPU, &gdt, DESCTYPE_S); per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu]; per_cpu(cpu_number, cpu) = cpu; diff --git a/arch/x86/kernel/traps_64.c b/arch/x86/kernel/traps_64.c index 3f18d73f420..513caaca711 100644 --- a/arch/x86/kernel/traps_64.c +++ b/arch/x86/kernel/traps_64.c @@ -1131,7 +1131,14 @@ asmlinkage void math_state_restore(void) } clts(); /* Allow maths ops (or we recurse) */ - restore_fpu_checking(&me->thread.xstate->fxsave); + /* + * Paranoid restore. send a SIGSEGV if we fail to restore the state. + */ + if (unlikely(restore_fpu_checking(&me->thread.xstate->fxsave))) { + stts(); + force_sig(SIGSEGV, me); + return; + } task_thread_info(me)->status |= TS_USEDFPU; me->fpu_counter++; } diff --git a/arch/x86/kernel/visws_quirks.c b/arch/x86/kernel/visws_quirks.c index 41e01b145c4..594ef47f0a6 100644 --- a/arch/x86/kernel/visws_quirks.c +++ b/arch/x86/kernel/visws_quirks.c @@ -184,8 +184,6 @@ static int __init visws_get_smp_config(unsigned int early) return 1; } -extern unsigned int __cpuinitdata maxcpus; - /* * The Visual Workstation is Intel MP compliant in the hardware * sense, but it doesn't have a BIOS(-configuration table). @@ -244,8 +242,8 @@ static int __init visws_find_smp_config(unsigned int reserve) ncpus = CO_CPU_MAX; } - if (ncpus > maxcpus) - ncpus = maxcpus; + if (ncpus > setup_max_cpus) + ncpus = setup_max_cpus; #ifdef CONFIG_X86_LOCAL_APIC smp_found_config = 1; diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S index cdb2363697d..af5bdad8460 100644 --- a/arch/x86/kernel/vmlinux_32.lds.S +++ b/arch/x86/kernel/vmlinux_32.lds.S @@ -209,3 +209,11 @@ SECTIONS DWARF_DEBUG } + +#ifdef CONFIG_KEXEC +/* Link time checks */ +#include <asm/kexec.h> + +ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE, + "kexec control code size is too big") +#endif diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 129618ca0ea..a87ea0e4b3d 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -60,7 +60,7 @@ static unsigned long dma_reserve __initdata; DEFINE_PER_CPU(struct mmu_gather, mmu_gathers); -int direct_gbpages __meminitdata +int direct_gbpages #ifdef CONFIG_DIRECT_GBPAGES = 1 #endif @@ -88,7 +88,11 @@ early_param("gbpages", parse_direct_gbpages_on); int after_bootmem; -static __init void *spp_getpage(void) +/* + * NOTE: This function is marked __ref because it calls __init function + * (alloc_bootmem_pages). It's safe to do it ONLY when after_bootmem == 0. + */ +static __ref void *spp_getpage(void) { void *ptr; @@ -314,6 +318,7 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end, { unsigned long pages = 0; unsigned long last_map_addr = end; + unsigned long start = address; int i = pmd_index(address); @@ -334,6 +339,9 @@ phys_pmd_init(pmd_t *pmd_page, unsigned long address, unsigned long end, if (!pmd_large(*pmd)) last_map_addr = phys_pte_update(pmd, address, end); + /* Count entries we're using from level2_ident_pgt */ + if (start == 0) + pages++; continue; } diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 016f335bbee..6ba6f889c79 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -170,7 +170,7 @@ static void __iomem *__ioremap_caller(resource_size_t phys_addr, phys_addr &= PAGE_MASK; size = PAGE_ALIGN(last_addr+1) - phys_addr; - retval = reserve_memtype(phys_addr, phys_addr + size, + retval = reserve_memtype(phys_addr, (u64)phys_addr + size, prot_val, &new_prot_val); if (retval) { pr_debug("Warning: reserve_memtype returned %d\n", retval); diff --git a/arch/x86/mm/pageattr-test.c b/arch/x86/mm/pageattr-test.c index 0dcd42eb94e..d4aa503caaa 100644 --- a/arch/x86/mm/pageattr-test.c +++ b/arch/x86/mm/pageattr-test.c @@ -221,8 +221,7 @@ static int pageattr_test(void) failed += print_split(&sc); if (failed) { - printk(KERN_ERR "NOT PASSED. Please report.\n"); - WARN_ON(1); + WARN(1, KERN_ERR "NOT PASSED. Please report.\n"); return -EINVAL; } else { if (print) diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index 65c6e46bf05..f5f5154ea11 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -55,13 +55,19 @@ static void split_page_count(int level) int arch_report_meminfo(char *page) { - int n = sprintf(page, "DirectMap4k: %8lu\n" - "DirectMap2M: %8lu\n", - direct_pages_count[PG_LEVEL_4K], - direct_pages_count[PG_LEVEL_2M]); + int n = sprintf(page, "DirectMap4k: %8lu kB\n", + direct_pages_count[PG_LEVEL_4K] << 2); +#if defined(CONFIG_X86_64) || defined(CONFIG_X86_PAE) + n += sprintf(page + n, "DirectMap2M: %8lu kB\n", + direct_pages_count[PG_LEVEL_2M] << 11); +#else + n += sprintf(page + n, "DirectMap4M: %8lu kB\n", + direct_pages_count[PG_LEVEL_2M] << 12); +#endif #ifdef CONFIG_X86_64 - n += sprintf(page + n, "DirectMap1G: %8lu\n", - direct_pages_count[PG_LEVEL_1G]); + if (direct_gbpages) + n += sprintf(page + n, "DirectMap1G: %8lu kB\n", + direct_pages_count[PG_LEVEL_1G] << 20); #endif return n; } @@ -592,10 +598,9 @@ repeat: if (!pte_val(old_pte)) { if (!primary) return 0; - printk(KERN_WARNING "CPA: called for zero pte. " + WARN(1, KERN_WARNING "CPA: called for zero pte. " "vaddr = %lx cpa->vaddr = %lx\n", address, cpa->vaddr); - WARN_ON(1); return -EINVAL; } diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c index 1eb2973a301..16ae70fc57e 100644 --- a/arch/x86/mm/srat_32.c +++ b/arch/x86/mm/srat_32.c @@ -178,7 +178,7 @@ void acpi_numa_arch_fixup(void) * start of the node, and that the current "end" address is after * the previous one. */ -static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk) +static __init int node_read_chunk(int nid, struct node_memory_chunk_s *memory_chunk) { /* * Only add present memory as told by the e820. @@ -189,10 +189,10 @@ static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_c if (memory_chunk->start_pfn >= max_pfn) { printk(KERN_INFO "Ignoring SRAT pfns: %08lx - %08lx\n", memory_chunk->start_pfn, memory_chunk->end_pfn); - return; + return -1; } if (memory_chunk->nid != nid) - return; + return -1; if (!node_has_online_mem(nid)) node_start_pfn[nid] = memory_chunk->start_pfn; @@ -202,6 +202,8 @@ static __init void node_read_chunk(int nid, struct node_memory_chunk_s *memory_c if (node_end_pfn[nid] < memory_chunk->end_pfn) node_end_pfn[nid] = memory_chunk->end_pfn; + + return 0; } int __init get_memcfg_from_srat(void) @@ -259,7 +261,9 @@ int __init get_memcfg_from_srat(void) printk(KERN_DEBUG "chunk %d nid %d start_pfn %08lx end_pfn %08lx\n", j, chunk->nid, chunk->start_pfn, chunk->end_pfn); - node_read_chunk(chunk->nid, chunk); + if (node_read_chunk(chunk->nid, chunk)) + continue; + e820_register_active_regions(chunk->nid, chunk->start_pfn, min(chunk->end_pfn, max_pfn)); } diff --git a/arch/x86/pci/mmconfig-shared.c b/arch/x86/pci/mmconfig-shared.c index 23faaa890ff..2bd5c53f638 100644 --- a/arch/x86/pci/mmconfig-shared.c +++ b/arch/x86/pci/mmconfig-shared.c @@ -365,7 +365,7 @@ static void __init pci_mmcfg_reject_broken(int early) return; reject: - printk(KERN_ERR "PCI: Not using MMCONFIG.\n"); + printk(KERN_INFO "PCI: Not using MMCONFIG.\n"); pci_mmcfg_arch_free(); kfree(pci_mmcfg_config); pci_mmcfg_config = NULL; diff --git a/drivers/acpi/dispatcher/dsobject.c b/drivers/acpi/dispatcher/dsobject.c index 1022e38994c..0f280589921 100644 --- a/drivers/acpi/dispatcher/dsobject.c +++ b/drivers/acpi/dispatcher/dsobject.c @@ -496,7 +496,7 @@ acpi_ds_build_internal_package_obj(struct acpi_walk_state *walk_state, arg = arg->common.next; } - ACPI_ERROR((AE_INFO, + ACPI_WARNING((AE_INFO, "Package List length (%X) larger than NumElements count (%X), truncated\n", i, element_count)); } else if (i < element_count) { diff --git a/drivers/acpi/dock.c b/drivers/acpi/dock.c index bb7c51f712b..7d2edf143f1 100644 --- a/drivers/acpi/dock.c +++ b/drivers/acpi/dock.c @@ -563,9 +563,6 @@ EXPORT_SYMBOL_GPL(unregister_hotplug_dock_device); */ static int handle_eject_request(struct dock_station *ds, u32 event) { - if (!dock_present(ds)) - return -ENODEV; - if (dock_in_progress(ds)) return -EBUSY; @@ -573,8 +570,16 @@ static int handle_eject_request(struct dock_station *ds, u32 event) * here we need to generate the undock * event prior to actually doing the undock * so that the device struct still exists. + * Also, even send the dock event if the + * device is not present anymore */ dock_event(ds, event, UNDOCK_EVENT); + + if (!dock_present(ds)) { + complete_undock(ds); + return -ENODEV; + } + hotplug_dock_devices(ds, ACPI_NOTIFY_EJECT_REQUEST); undock(ds); eject_dock(ds); diff --git a/drivers/acpi/ec.c b/drivers/acpi/ec.c index 5622aee996b..13593f9f219 100644 --- a/drivers/acpi/ec.c +++ b/drivers/acpi/ec.c @@ -110,6 +110,31 @@ static struct acpi_ec { u8 handlers_installed; } *boot_ec, *first_ec; +/* + * Some Asus system have exchanged ECDT data/command IO addresses. + */ +static int print_ecdt_error(const struct dmi_system_id *id) +{ + printk(KERN_NOTICE PREFIX "%s detected - " + "ECDT has exchanged control/data I/O address\n", + id->ident); + return 0; +} + +static struct dmi_system_id __cpuinitdata ec_dmi_table[] = { + { + print_ecdt_error, "Asus L4R", { + DMI_MATCH(DMI_BIOS_VERSION, "1008.006"), + DMI_MATCH(DMI_PRODUCT_NAME, "L4R"), + DMI_MATCH(DMI_BOARD_NAME, "L4R") }, NULL}, + { + print_ecdt_error, "Asus M6R", { + DMI_MATCH(DMI_BIOS_VERSION, "0207"), + DMI_MATCH(DMI_PRODUCT_NAME, "M6R"), + DMI_MATCH(DMI_BOARD_NAME, "M6R") }, NULL}, + {}, +}; + /* -------------------------------------------------------------------------- Transaction Management -------------------------------------------------------------------------- */ @@ -196,6 +221,8 @@ static int acpi_ec_wait(struct acpi_ec *ec, enum ec_event event, int force_poll) return 0; msleep(1); } + if (acpi_ec_check_status(ec,event)) + return 0; } pr_err(PREFIX "acpi_ec_wait timeout, status = 0x%2.2x, event = %s\n", acpi_ec_read_status(ec), @@ -911,6 +938,15 @@ int __init acpi_ec_ecdt_probe(void) pr_info(PREFIX "EC description table is found, configuring boot EC\n"); boot_ec->command_addr = ecdt_ptr->control.address; boot_ec->data_addr = ecdt_ptr->data.address; + if (dmi_check_system(ec_dmi_table)) { + /* + * If the board falls into ec_dmi_table, it means + * that ECDT table gives the incorrect command/status + * & data I/O address. Just fix it. + */ + boot_ec->data_addr = ecdt_ptr->control.address; + boot_ec->command_addr = ecdt_ptr->data.address; + } boot_ec->gpe = ecdt_ptr->gpe; boot_ec->handle = ACPI_ROOT_OBJECT; acpi_get_handle(ACPI_ROOT_OBJECT, ecdt_ptr->id, &boot_ec->handle); diff --git a/drivers/acpi/executer/exconfig.c b/drivers/acpi/executer/exconfig.c index 2a32c843cb4..8892b9824fa 100644 --- a/drivers/acpi/executer/exconfig.c +++ b/drivers/acpi/executer/exconfig.c @@ -479,5 +479,8 @@ acpi_status acpi_ex_unload_table(union acpi_operand_object *ddb_handle) acpi_tb_set_table_loaded_flag(table_index, FALSE); + /* Table unloaded, remove a reference to the ddb_handle object */ + + acpi_ut_remove_reference(ddb_handle); return_ACPI_STATUS(AE_OK); } diff --git a/drivers/acpi/namespace/nsnames.c b/drivers/acpi/namespace/nsnames.c index 549db42f16c..bd577387800 100644 --- a/drivers/acpi/namespace/nsnames.c +++ b/drivers/acpi/namespace/nsnames.c @@ -56,13 +56,14 @@ ACPI_MODULE_NAME("nsnames") * Size - Size of the pathname * *name_buffer - Where to return the pathname * - * RETURN: Places the pathname into the name_buffer, in external format + * RETURN: Status + * Places the pathname into the name_buffer, in external format * (name segments separated by path separators) * * DESCRIPTION: Generate a full pathaname * ******************************************************************************/ -void +acpi_status acpi_ns_build_external_path(struct acpi_namespace_node *node, acpi_size size, char *name_buffer) { @@ -77,7 +78,7 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node, if (index < ACPI_NAME_SIZE) { name_buffer[0] = AML_ROOT_PREFIX; name_buffer[1] = 0; - return; + return (AE_OK); } /* Store terminator byte, then build name backwards */ @@ -105,11 +106,13 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node, if (index != 0) { ACPI_ERROR((AE_INFO, - "Could not construct pathname; index=%X, size=%X, Path=%s", + "Could not construct external pathname; index=%X, size=%X, Path=%s", (u32) index, (u32) size, &name_buffer[size])); + + return (AE_BAD_PARAMETER); } - return; + return (AE_OK); } #ifdef ACPI_DEBUG_OUTPUT @@ -129,6 +132,7 @@ acpi_ns_build_external_path(struct acpi_namespace_node *node, char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node) { + acpi_status status; char *name_buffer; acpi_size size; @@ -138,8 +142,7 @@ char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node) size = acpi_ns_get_pathname_length(node); if (!size) { - ACPI_ERROR((AE_INFO, "Invalid node failure")); - return_PTR(NULL); + return (NULL); } /* Allocate a buffer to be returned to caller */ @@ -152,7 +155,11 @@ char *acpi_ns_get_external_pathname(struct acpi_namespace_node *node) /* Build the path in the allocated buffer */ - acpi_ns_build_external_path(node, size, name_buffer); + status = acpi_ns_build_external_path(node, size, name_buffer); + if (ACPI_FAILURE(status)) { + return (NULL); + } + return_PTR(name_buffer); } #endif @@ -186,7 +193,7 @@ acpi_size acpi_ns_get_pathname_length(struct acpi_namespace_node *node) while (next_node && (next_node != acpi_gbl_root_node)) { if (ACPI_GET_DESCRIPTOR_TYPE(next_node) != ACPI_DESC_TYPE_NAMED) { ACPI_ERROR((AE_INFO, - "Invalid NS Node (%p) while traversing path", + "Invalid Namespace Node (%p) while traversing namespace", next_node)); return 0; } @@ -234,8 +241,7 @@ acpi_ns_handle_to_pathname(acpi_handle target_handle, required_size = acpi_ns_get_pathname_length(node); if (!required_size) { - ACPI_ERROR((AE_INFO, "Invalid node failure")); - return_ACPI_STATUS(AE_ERROR); + return_ACPI_STATUS(AE_BAD_PARAMETER); } /* Validate/Allocate/Clear caller buffer */ @@ -247,7 +253,11 @@ acpi_ns_handle_to_pathname(acpi_handle target_handle, /* Build the path in the caller buffer */ - acpi_ns_build_external_path(node, required_size, buffer->pointer); + status = + acpi_ns_build_external_path(node, required_size, buffer->pointer); + if (ACPI_FAILURE(status)) { + return_ACPI_STATUS(status); + } ACPI_DEBUG_PRINT((ACPI_DB_EXEC, "%s [%X]\n", (char *)buffer->pointer, (u32) required_size)); diff --git a/drivers/acpi/pci_link.c b/drivers/acpi/pci_link.c index 89f3b2abfdc..cf47805a744 100644 --- a/drivers/acpi/pci_link.c +++ b/drivers/acpi/pci_link.c @@ -849,7 +849,7 @@ static int __init acpi_irq_penalty_update(char *str, int used) if (irq < 0) continue; - if (irq >= ACPI_MAX_IRQS) + if (irq >= ARRAY_SIZE(acpi_irq_penalty)) continue; if (used) @@ -872,10 +872,12 @@ static int __init acpi_irq_penalty_update(char *str, int used) */ void acpi_penalize_isa_irq(int irq, int active) { - if (active) - acpi_irq_penalty[irq] += PIRQ_PENALTY_ISA_USED; - else - acpi_irq_penalty[irq] += PIRQ_PENALTY_PCI_USING; + if (irq >= 0 && irq < ARRAY_SIZE(acpi_irq_penalty)) { + if (active) + acpi_irq_penalty[irq] += PIRQ_PENALTY_ISA_USED; + else + acpi_irq_penalty[irq] += PIRQ_PENALTY_PCI_USING; + } } /* diff --git a/drivers/acpi/processor_core.c b/drivers/acpi/processor_core.c index e36422a7122..ee68ac54c0d 100644 --- a/drivers/acpi/processor_core.c +++ b/drivers/acpi/processor_core.c @@ -123,7 +123,7 @@ struct acpi_processor_errata errata __read_mostly; static int set_no_mwait(const struct dmi_system_id *id) { printk(KERN_NOTICE PREFIX "%s detected - " - "disable mwait for CPU C-stetes\n", id->ident); + "disabling mwait for CPU C-states\n", id->ident); idle_nomwait = 1; return 0; } @@ -138,7 +138,7 @@ static struct dmi_system_id __cpuinitdata processor_idle_dmi_table[] = { { set_no_mwait, "Extensa 5220", { DMI_MATCH(DMI_BIOS_VENDOR, "Phoenix Technologies LTD"), - DMI_MATCH(DMI_SYS_VENDOR, "ACER"), + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), DMI_MATCH(DMI_PRODUCT_VERSION, "0100"), DMI_MATCH(DMI_BOARD_NAME, "Columbia") }, NULL}, {}, diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 283c08f5f4d..cf5b1b7b684 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -41,7 +41,6 @@ #include <linux/pm_qos_params.h> #include <linux/clockchips.h> #include <linux/cpuidle.h> -#include <linux/cpuidle.h> /* * Include the apic definitions for x86 to have the APIC timer related defines diff --git a/drivers/acpi/processor_perflib.c b/drivers/acpi/processor_perflib.c index 0133af49cf0..80c251ec6d2 100644 --- a/drivers/acpi/processor_perflib.c +++ b/drivers/acpi/processor_perflib.c @@ -70,8 +70,8 @@ static DEFINE_MUTEX(performance_mutex); * 0 -> cpufreq low level drivers initialized -> consider _PPC values * 1 -> ignore _PPC totally -> forced by user through boot param */ -static unsigned int ignore_ppc = -1; -module_param(ignore_ppc, uint, 0644); +static int ignore_ppc = -1; +module_param(ignore_ppc, int, 0644); MODULE_PARM_DESC(ignore_ppc, "If the frequency of your machine gets wrongly" \ "limited by BIOS, this should help"); diff --git a/drivers/acpi/resources/rscalc.c b/drivers/acpi/resources/rscalc.c index f61ebc679e6..d9063ea414e 100644 --- a/drivers/acpi/resources/rscalc.c +++ b/drivers/acpi/resources/rscalc.c @@ -587,6 +587,9 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object, } else { temp_size_needed += acpi_ns_get_pathname_length((*sub_object_list)->reference.node); + if (!temp_size_needed) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } } } else { /* diff --git a/drivers/acpi/sbshc.c b/drivers/acpi/sbshc.c index bcf2c70fca8..a4e3767b8c6 100644 --- a/drivers/acpi/sbshc.c +++ b/drivers/acpi/sbshc.c @@ -107,6 +107,13 @@ static int wait_transaction_complete(struct acpi_smb_hc *hc, int timeout) if (wait_event_timeout(hc->wait, smb_check_done(hc), msecs_to_jiffies(timeout))) return 0; + /* + * After the timeout happens, OS will try to check the status of SMbus. + * If the status is what OS expected, it will be regarded as the bogus + * timeout. + */ + if (smb_check_done(hc)) + return 0; else return -ETIME; } diff --git a/drivers/acpi/tables.c b/drivers/acpi/tables.c index c3419182c9a..775c97a282b 100644 --- a/drivers/acpi/tables.c +++ b/drivers/acpi/tables.c @@ -300,6 +300,8 @@ int __init acpi_table_init(void) static int __init acpi_parse_apic_instance(char *str) { + if (!str) + return -EINVAL; acpi_apic_instance = simple_strtoul(str, NULL, 0); diff --git a/drivers/acpi/utilities/utalloc.c b/drivers/acpi/utilities/utalloc.c index e7bf34a7b1d..7dcb67e0b21 100644 --- a/drivers/acpi/utilities/utalloc.c +++ b/drivers/acpi/utilities/utalloc.c @@ -242,10 +242,12 @@ acpi_ut_initialize_buffer(struct acpi_buffer * buffer, { acpi_status status = AE_OK; - if (!required_length) { - WARN_ON(1); - return AE_ERROR; + /* Parameter validation */ + + if (!buffer || !required_length) { + return (AE_BAD_PARAMETER); } + switch (buffer->length) { case ACPI_NO_BUFFER: diff --git a/drivers/acpi/utilities/utdelete.c b/drivers/acpi/utilities/utdelete.c index c5c791a575c..42609d3a8aa 100644 --- a/drivers/acpi/utilities/utdelete.c +++ b/drivers/acpi/utilities/utdelete.c @@ -135,6 +135,10 @@ static void acpi_ut_delete_internal_obj(union acpi_operand_object *object) obj_pointer = object->package.elements; break; + /* + * These objects have a possible list of notify handlers. + * Device object also may have a GPE block. + */ case ACPI_TYPE_DEVICE: if (object->device.gpe_block) { @@ -142,9 +146,14 @@ static void acpi_ut_delete_internal_obj(union acpi_operand_object *object) gpe_block); } - /* Walk the handler list for this device */ + /*lint -fallthrough */ + + case ACPI_TYPE_PROCESSOR: + case ACPI_TYPE_THERMAL: + + /* Walk the notify handler list for this object */ - handler_desc = object->device.handler; + handler_desc = object->common_notify.handler; while (handler_desc) { next_desc = handler_desc->address_space.next; acpi_ut_remove_reference(handler_desc); diff --git a/drivers/acpi/utilities/utobject.c b/drivers/acpi/utilities/utobject.c index e25484495e6..916eff399eb 100644 --- a/drivers/acpi/utilities/utobject.c +++ b/drivers/acpi/utilities/utobject.c @@ -425,6 +425,7 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object, acpi_size * obj_length) { acpi_size length; + acpi_size size; acpi_status status = AE_OK; ACPI_FUNCTION_TRACE_PTR(ut_get_simple_object_size, internal_object); @@ -484,10 +485,14 @@ acpi_ut_get_simple_object_size(union acpi_operand_object *internal_object, * Get the actual length of the full pathname to this object. * The reference will be converted to the pathname to the object */ - length += - ACPI_ROUND_UP_TO_NATIVE_WORD - (acpi_ns_get_pathname_length - (internal_object->reference.node)); + size = + acpi_ns_get_pathname_length(internal_object-> + reference.node); + if (!size) { + return_ACPI_STATUS(AE_BAD_PARAMETER); + } + + length += ACPI_ROUND_UP_TO_NATIVE_WORD(size); break; default: diff --git a/drivers/acpi/wmi.c b/drivers/acpi/wmi.c index c33b1c6e93b..cfe2c833474 100644 --- a/drivers/acpi/wmi.c +++ b/drivers/acpi/wmi.c @@ -347,7 +347,7 @@ struct acpi_buffer *out) strcpy(method, "WQ"); strncat(method, block->object_id, 2); - status = acpi_evaluate_object(handle, method, NULL, out); + status = acpi_evaluate_object(handle, method, &input, out); /* * If ACPI_WMI_EXPENSIVE, call the relevant WCxx method, even if diff --git a/drivers/char/pcmcia/ipwireless/tty.c b/drivers/char/pcmcia/ipwireless/tty.c index b1414507997..3a23e7694d5 100644 --- a/drivers/char/pcmcia/ipwireless/tty.c +++ b/drivers/char/pcmcia/ipwireless/tty.c @@ -29,7 +29,6 @@ #include <linux/tty_driver.h> #include <linux/tty_flip.h> #include <linux/uaccess.h> -#include <linux/version.h> #include "tty.h" #include "network.h" diff --git a/drivers/char/synclink_gt.c b/drivers/char/synclink_gt.c index 509c89ac5bd..08911ed6649 100644 --- a/drivers/char/synclink_gt.c +++ b/drivers/char/synclink_gt.c @@ -47,7 +47,6 @@ #include <linux/module.h> -#include <linux/version.h> #include <linux/errno.h> #include <linux/signal.h> #include <linux/sched.h> diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index 0e6866fe0f9..a27160ba21d 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -2496,45 +2496,25 @@ static int tiocgwinsz(struct tty_struct *tty, struct winsize __user *arg) } /** - * tiocswinsz - implement window size set ioctl - * @tty; tty - * @arg: user buffer for result + * tty_do_resize - resize event + * @tty: tty being resized + * @real_tty: real tty (if using a pty/tty pair) + * @rows: rows (character) + * @cols: cols (character) * - * Copies the user idea of the window size to the kernel. Traditionally - * this is just advisory information but for the Linux console it - * actually has driver level meaning and triggers a VC resize. - * - * Locking: - * Called function use the console_sem is used to ensure we do - * not try and resize the console twice at once. - * The tty->termios_mutex is used to ensure we don't double - * resize and get confused. Lock order - tty->termios_mutex before - * console sem + * Update the termios variables and send the neccessary signals to + * peform a terminal resize correctly */ -static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty, - struct winsize __user *arg) +int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, + struct winsize *ws) { - struct winsize tmp_ws; struct pid *pgrp, *rpgrp; unsigned long flags; - if (copy_from_user(&tmp_ws, arg, sizeof(*arg))) - return -EFAULT; - mutex_lock(&tty->termios_mutex); - if (!memcmp(&tmp_ws, &tty->winsize, sizeof(*arg))) + if (!memcmp(ws, &tty->winsize, sizeof(*ws))) goto done; - -#ifdef CONFIG_VT - if (tty->driver->type == TTY_DRIVER_TYPE_CONSOLE) { - if (vc_lock_resize(tty->driver_data, tmp_ws.ws_col, - tmp_ws.ws_row)) { - mutex_unlock(&tty->termios_mutex); - return -ENXIO; - } - } -#endif /* Get the PID values and reference them so we can avoid holding the tty ctrl lock while sending signals */ spin_lock_irqsave(&tty->ctrl_lock, flags); @@ -2550,14 +2530,42 @@ static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty, put_pid(pgrp); put_pid(rpgrp); - tty->winsize = tmp_ws; - real_tty->winsize = tmp_ws; + tty->winsize = *ws; + real_tty->winsize = *ws; done: mutex_unlock(&tty->termios_mutex); return 0; } /** + * tiocswinsz - implement window size set ioctl + * @tty; tty + * @arg: user buffer for result + * + * Copies the user idea of the window size to the kernel. Traditionally + * this is just advisory information but for the Linux console it + * actually has driver level meaning and triggers a VC resize. + * + * Locking: + * Driver dependant. The default do_resize method takes the + * tty termios mutex and ctrl_lock. The console takes its own lock + * then calls into the default method. + */ + +static int tiocswinsz(struct tty_struct *tty, struct tty_struct *real_tty, + struct winsize __user *arg) +{ + struct winsize tmp_ws; + if (copy_from_user(&tmp_ws, arg, sizeof(*arg))) + return -EFAULT; + + if (tty->ops->resize) + return tty->ops->resize(tty, real_tty, &tmp_ws); + else + return tty_do_resize(tty, real_tty, &tmp_ws); +} + +/** * tioccons - allow admin to move logical console * @file: the file to become console * diff --git a/drivers/char/vt.c b/drivers/char/vt.c index 1bc00c9d860..60359c36091 100644 --- a/drivers/char/vt.c +++ b/drivers/char/vt.c @@ -803,7 +803,25 @@ static inline int resize_screen(struct vc_data *vc, int width, int height, */ #define VC_RESIZE_MAXCOL (32767) #define VC_RESIZE_MAXROW (32767) -int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines) + +/** + * vc_do_resize - resizing method for the tty + * @tty: tty being resized + * @real_tty: real tty (different to tty if a pty/tty pair) + * @vc: virtual console private data + * @cols: columns + * @lines: lines + * + * Resize a virtual console, clipping according to the actual constraints. + * If the caller passes a tty structure then update the termios winsize + * information and perform any neccessary signal handling. + * + * Caller must hold the console semaphore. Takes the termios mutex and + * ctrl_lock of the tty IFF a tty is passed. + */ + +static int vc_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, + struct vc_data *vc, unsigned int cols, unsigned int lines) { unsigned long old_origin, new_origin, new_scr_end, rlth, rrem, err = 0; unsigned int old_cols, old_rows, old_row_size, old_screen_size; @@ -907,24 +925,15 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines) gotoxy(vc, vc->vc_x, vc->vc_y); save_cur(vc); - if (vc->vc_tty) { - struct winsize ws, *cws = &vc->vc_tty->winsize; - struct pid *pgrp = NULL; - + if (tty) { + /* Rewrite the requested winsize data with the actual + resulting sizes */ + struct winsize ws; memset(&ws, 0, sizeof(ws)); ws.ws_row = vc->vc_rows; ws.ws_col = vc->vc_cols; ws.ws_ypixel = vc->vc_scan_lines; - - spin_lock_irq(&vc->vc_tty->ctrl_lock); - if ((ws.ws_row != cws->ws_row || ws.ws_col != cws->ws_col)) - pgrp = get_pid(vc->vc_tty->pgrp); - spin_unlock_irq(&vc->vc_tty->ctrl_lock); - if (pgrp) { - kill_pgrp(vc->vc_tty->pgrp, SIGWINCH, 1); - put_pid(pgrp); - } - *cws = ws; + tty_do_resize(tty, real_tty, &ws); } if (CON_IS_VISIBLE(vc)) @@ -932,14 +941,47 @@ int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines) return err; } -int vc_lock_resize(struct vc_data *vc, unsigned int cols, unsigned int lines) +/** + * vc_resize - resize a VT + * @vc: virtual console + * @cols: columns + * @rows: rows + * + * Resize a virtual console as seen from the console end of things. We + * use the common vc_do_resize methods to update the structures. The + * caller must hold the console sem to protect console internals and + * vc->vc_tty + */ + +int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int rows) +{ + return vc_do_resize(vc->vc_tty, vc->vc_tty, vc, cols, rows); +} + +/** + * vt_resize - resize a VT + * @tty: tty to resize + * @real_tty: tty if a pty/tty pair + * @ws: winsize attributes + * + * Resize a virtual terminal. This is called by the tty layer as we + * register our own handler for resizing. The mutual helper does all + * the actual work. + * + * Takes the console sem and the called methods then take the tty + * termios_mutex and the tty ctrl_lock in that order. + */ + +int vt_resize(struct tty_struct *tty, struct tty_struct *real_tty, + struct winsize *ws) { - int rc; + struct vc_data *vc = tty->driver_data; + int ret; acquire_console_sem(); - rc = vc_resize(vc, cols, lines); + ret = vc_do_resize(tty, real_tty, vc, ws->ws_col, ws->ws_row); release_console_sem(); - return rc; + return ret; } void vc_deallocate(unsigned int currcons) @@ -2907,6 +2949,7 @@ static const struct tty_operations con_ops = { .start = con_start, .throttle = con_throttle, .unthrottle = con_unthrottle, + .resize = vt_resize, }; int __init vty_init(void) @@ -4061,7 +4104,6 @@ EXPORT_SYMBOL(default_blu); EXPORT_SYMBOL(update_region); EXPORT_SYMBOL(redraw_screen); EXPORT_SYMBOL(vc_resize); -EXPORT_SYMBOL(vc_lock_resize); EXPORT_SYMBOL(fg_console); EXPORT_SYMBOL(console_blank_hook); EXPORT_SYMBOL(console_blanked); diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index 3211afd9d57..c904e9ad4a7 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -947,14 +947,16 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, get_user(cc, &vtsizes->v_cols)) ret = -EFAULT; else { + acquire_console_sem(); for (i = 0; i < MAX_NR_CONSOLES; i++) { vc = vc_cons[i].d; if (vc) { vc->vc_resize_user = 1; - vc_lock_resize(vc_cons[i].d, cc, ll); + vc_resize(vc_cons[i].d, cc, ll); } } + release_console_sem(); } break; } diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c index 8bfee5fb722..278c9857bcf 100644 --- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c +++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c @@ -74,7 +74,6 @@ * currently programmed in the FPGA. */ -#include <linux/version.h> #include <linux/module.h> #include <linux/kernel.h> #include <linux/types.h> diff --git a/drivers/cpuidle/governors/ladder.c b/drivers/cpuidle/governors/ladder.c index ba7b9a6b17a..a4bec3f919a 100644 --- a/drivers/cpuidle/governors/ladder.c +++ b/drivers/cpuidle/governors/ladder.c @@ -67,10 +67,17 @@ static int ladder_select_state(struct cpuidle_device *dev) struct ladder_device *ldev = &__get_cpu_var(ladder_devices); struct ladder_device_state *last_state; int last_residency, last_idx = ldev->last_state_idx; + int latency_req = pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY); if (unlikely(!ldev)) return 0; + /* Special case when user has set very strict latency requirement */ + if (unlikely(latency_req == 0)) { + ladder_do_selection(ldev, last_idx, 0); + return 0; + } + last_state = &ldev->states[last_idx]; if (dev->states[last_idx].flags & CPUIDLE_FLAG_TIME_VALID) @@ -81,8 +88,7 @@ static int ladder_select_state(struct cpuidle_device *dev) /* consider promotion */ if (last_idx < dev->state_count - 1 && last_residency > last_state->threshold.promotion_time && - dev->states[last_idx + 1].exit_latency <= - pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) { + dev->states[last_idx + 1].exit_latency <= latency_req) { last_state->stats.promotion_count++; last_state->stats.demotion_count = 0; if (last_state->stats.promotion_count >= last_state->threshold.promotion_count) { @@ -92,7 +98,19 @@ static int ladder_select_state(struct cpuidle_device *dev) } /* consider demotion */ - if (last_idx > 0 && + if (last_idx > CPUIDLE_DRIVER_STATE_START && + dev->states[last_idx].exit_latency > latency_req) { + int i; + + for (i = last_idx - 1; i > CPUIDLE_DRIVER_STATE_START; i--) { + if (dev->states[i].exit_latency <= latency_req) + break; + } + ladder_do_selection(ldev, last_idx, i); + return i; + } + + if (last_idx > CPUIDLE_DRIVER_STATE_START && last_residency < last_state->threshold.demotion_time) { last_state->stats.demotion_count++; last_state->stats.promotion_count = 0; @@ -117,7 +135,7 @@ static int ladder_enable_device(struct cpuidle_device *dev) struct ladder_device_state *lstate; struct cpuidle_state *state; - ldev->last_state_idx = 0; + ldev->last_state_idx = CPUIDLE_DRIVER_STATE_START; for (i = 0; i < dev->state_count; i++) { state = &dev->states[i]; diff --git a/drivers/cpuidle/governors/menu.c b/drivers/cpuidle/governors/menu.c index 78d77c5dc35..8d7cf3f3145 100644 --- a/drivers/cpuidle/governors/menu.c +++ b/drivers/cpuidle/governors/menu.c @@ -34,21 +34,28 @@ static DEFINE_PER_CPU(struct menu_device, menu_devices); static int menu_select(struct cpuidle_device *dev) { struct menu_device *data = &__get_cpu_var(menu_devices); + int latency_req = pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY); int i; + /* Special case when user has set very strict latency requirement */ + if (unlikely(latency_req == 0)) { + data->last_state_idx = 0; + return 0; + } + /* determine the expected residency time */ data->expected_us = (u32) ktime_to_ns(tick_nohz_get_sleep_length()) / 1000; /* find the deepest idle state that satisfies our constraints */ - for (i = 1; i < dev->state_count; i++) { + for (i = CPUIDLE_DRIVER_STATE_START + 1; i < dev->state_count; i++) { struct cpuidle_state *s = &dev->states[i]; if (s->target_residency > data->expected_us) break; if (s->target_residency > data->predicted_us) break; - if (s->exit_latency > pm_qos_requirement(PM_QOS_CPU_DMA_LATENCY)) + if (s->exit_latency > latency_req) break; } @@ -67,9 +74,9 @@ static void menu_reflect(struct cpuidle_device *dev) { struct menu_device *data = &__get_cpu_var(menu_devices); int last_idx = data->last_state_idx; - unsigned int measured_us = - cpuidle_get_last_residency(dev) + data->elapsed_us; + unsigned int last_idle_us = cpuidle_get_last_residency(dev); struct cpuidle_state *target = &dev->states[last_idx]; + unsigned int measured_us; /* * Ugh, this idle state doesn't support residency measurements, so we @@ -77,20 +84,27 @@ static void menu_reflect(struct cpuidle_device *dev) * for one full standard timer tick. However, be aware that this * could potentially result in a suboptimal state transition. */ - if (!(target->flags & CPUIDLE_FLAG_TIME_VALID)) - measured_us = USEC_PER_SEC / HZ; + if (unlikely(!(target->flags & CPUIDLE_FLAG_TIME_VALID))) + last_idle_us = USEC_PER_SEC / HZ; + + /* + * measured_us and elapsed_us are the cumulative idle time, since the + * last time we were woken out of idle by an interrupt. + */ + if (data->elapsed_us <= data->elapsed_us + last_idle_us) + measured_us = data->elapsed_us + last_idle_us; + else + measured_us = -1; + + /* Predict time until next break event */ + data->predicted_us = max(measured_us, data->last_measured_us); - /* Predict time remaining until next break event */ - if (measured_us + BREAK_FUZZ < data->expected_us - target->exit_latency) { - data->predicted_us = max(measured_us, data->last_measured_us); + if (last_idle_us + BREAK_FUZZ < + data->expected_us - target->exit_latency) { data->last_measured_us = measured_us; data->elapsed_us = 0; } else { - if (data->elapsed_us < data->elapsed_us + measured_us) - data->elapsed_us = measured_us; - else - data->elapsed_us = -1; - data->predicted_us = max(measured_us, data->last_measured_us); + data->elapsed_us = measured_us; } } diff --git a/drivers/dma/mv_xor.c b/drivers/dma/mv_xor.c index a4e4494663b..0328da020a1 100644 --- a/drivers/dma/mv_xor.c +++ b/drivers/dma/mv_xor.c @@ -25,7 +25,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/memory.h> -#include <asm/plat-orion/mv_xor.h> +#include <plat/mv_xor.h> #include "mv_xor.h" static void mv_xor_issue_pending(struct dma_chan *chan); diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c index 61e78a4369b..b15f8824963 100644 --- a/drivers/hid/usbhid/hid-quirks.c +++ b/drivers/hid/usbhid/hid-quirks.c @@ -654,12 +654,12 @@ static const struct hid_blacklist { { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ANSI, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN }, { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_ISO, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD }, { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_ALU_WIRELESS_JIS, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN }, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, HID_QUIRK_APPLE_HAS_FN }, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD }, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, HID_QUIRK_APPLE_HAS_FN }, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, HID_QUIRK_APPLE_HAS_FN }, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD }, - { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, HID_QUIRK_APPLE_HAS_FN }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD | HID_QUIRK_IGNORE_MOUSE}, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE}, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE}, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_APPLE_ISO_KEYBOARD | HID_QUIRK_IGNORE_MOUSE }, + { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE }, { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_FOUNTAIN_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE }, { USB_VENDOR_ID_APPLE, USB_DEVICE_ID_APPLE_GEYSER1_TP_ONLY, HID_QUIRK_APPLE_NUMLOCK_EMULATION | HID_QUIRK_APPLE_HAS_FN | HID_QUIRK_IGNORE_MOUSE }, diff --git a/drivers/hwmon/Kconfig b/drivers/hwmon/Kconfig index bf4ebfb86fa..d402e8d813c 100644 --- a/drivers/hwmon/Kconfig +++ b/drivers/hwmon/Kconfig @@ -77,6 +77,22 @@ config SENSORS_AD7418 This driver can also be built as a module. If so, the module will be called ad7418. +config SENSORS_ADCXX + tristate "National Semiconductor ADCxxxSxxx" + depends on SPI_MASTER && EXPERIMENTAL + help + If you say yes here you get support for the National Semiconductor + ADC<bb><c>S<sss> chip family, where + * bb is the resolution in number of bits (8, 10, 12) + * c is the number of channels (1, 2, 4, 8) + * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 + kSPS and 101 for 1 MSPS) + + Examples : ADC081S101, ADC124S501, ... + + This driver can also be built as a module. If so, the module + will be called adcxx. + config SENSORS_ADM1021 tristate "Analog Devices ADM1021 and compatibles" depends on I2C diff --git a/drivers/hwmon/Makefile b/drivers/hwmon/Makefile index 7943e5cefb0..950134ab842 100644 --- a/drivers/hwmon/Makefile +++ b/drivers/hwmon/Makefile @@ -17,6 +17,7 @@ obj-$(CONFIG_SENSORS_ABITUGURU) += abituguru.o obj-$(CONFIG_SENSORS_ABITUGURU3)+= abituguru3.o obj-$(CONFIG_SENSORS_AD7414) += ad7414.o obj-$(CONFIG_SENSORS_AD7418) += ad7418.o +obj-$(CONFIG_SENSORS_ADCXX) += adcxx.o obj-$(CONFIG_SENSORS_ADM1021) += adm1021.o obj-$(CONFIG_SENSORS_ADM1025) += adm1025.o obj-$(CONFIG_SENSORS_ADM1026) += adm1026.o diff --git a/drivers/hwmon/abituguru3.c b/drivers/hwmon/abituguru3.c index f00f497b9ca..d568c65c137 100644 --- a/drivers/hwmon/abituguru3.c +++ b/drivers/hwmon/abituguru3.c @@ -1,5 +1,8 @@ /* - abituguru3.c Copyright (c) 2006 Hans de Goede <j.w.r.degoede@hhs.nl> + abituguru3.c + + Copyright (c) 2006-2008 Hans de Goede <j.w.r.degoede@hhs.nl> + Copyright (c) 2008 Alistair John Strachan <alistair@devzero.co.uk> This program is free software; you can redistribute it and/or modify it under the terms of the GNU General Public License as published by @@ -116,7 +119,7 @@ struct abituguru3_sensor_info { struct abituguru3_motherboard_info { u16 id; - const char *name; + const char *dmi_name; /* + 1 -> end of sensors indicated by a sensor with name == NULL */ struct abituguru3_sensor_info sensors[ABIT_UGURU3_MAX_NO_SENSORS + 1]; }; @@ -161,7 +164,7 @@ struct abituguru3_data { /* Constants */ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { - { 0x000C, "unknown", { + { 0x000C, NULL /* Unknown, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 10, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -183,7 +186,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX1 Fan", 35, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x000D, "Abit AW8", { + { 0x000D, NULL /* Abit AW8, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 10, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -212,7 +215,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX5 Fan", 39, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x000E, "AL-8", { + { 0x000E, NULL /* AL-8, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 10, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -233,7 +236,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "SYS Fan", 34, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x000F, "unknown", { + { 0x000F, NULL /* Unknown, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 10, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -254,7 +257,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "SYS Fan", 34, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0010, "Abit NI8 SLI GR", { + { 0x0010, NULL /* Abit NI8 SLI GR, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 10, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -276,7 +279,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "OTES1 Fan", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0011, "Abit AT8 32X", { + { 0x0011, NULL /* Abit AT8 32X, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 20, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -302,7 +305,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX2 Fan", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0012, "Abit AN8 32X", { + { 0x0012, NULL /* Abit AN8 32X, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 20, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -324,7 +327,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX1 Fan", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0013, "Abit AW8D", { + { 0x0013, NULL /* Abit AW8D, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 10, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -353,7 +356,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX5 Fan", 39, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0014, "Abit AB9 Pro", { + { 0x0014, NULL /* Abit AB9 Pro, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 10, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -374,7 +377,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "SYS Fan", 34, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0015, "unknown", { + { 0x0015, NULL /* Unknown, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR", 1, 0, 20, 1, 0 }, { "DDR VTT", 2, 0, 10, 1, 0 }, @@ -398,7 +401,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX3 Fan", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0016, "AW9D-MAX", { + { 0x0016, NULL /* AW9D-MAX, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR2", 1, 0, 20, 1, 0 }, { "DDR2 VTT", 2, 0, 10, 1, 0 }, @@ -426,7 +429,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "OTES1 Fan", 38, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0017, "unknown", { + { 0x0017, NULL /* Unknown, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR2", 1, 0, 20, 1, 0 }, { "DDR2 VTT", 2, 0, 10, 1, 0 }, @@ -451,7 +454,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX3 FAN", 37, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0018, "unknown", { + { 0x0018, NULL /* Unknown, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR2", 1, 0, 20, 1, 0 }, { "DDR2 VTT", 2, 0, 10, 1, 0 }, @@ -478,7 +481,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX3 Fan", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x0019, "unknown", { + { 0x0019, NULL /* Unknown, need DMI string */, { { "CPU Core", 7, 0, 10, 1, 0 }, { "DDR2", 13, 0, 20, 1, 0 }, { "DDR2 VTT", 14, 0, 10, 1, 0 }, @@ -505,7 +508,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX3 FAN", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x001A, "Abit IP35 Pro", { + { 0x001A, "IP35 Pro(Intel P35-ICH9R)", { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR2", 1, 0, 20, 1, 0 }, { "DDR2 VTT", 2, 0, 10, 1, 0 }, @@ -533,7 +536,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX4 Fan", 37, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x001B, "unknown", { + { 0x001B, NULL /* Unknown, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR3", 1, 0, 20, 1, 0 }, { "DDR3 VTT", 2, 0, 10, 1, 0 }, @@ -560,7 +563,7 @@ static const struct abituguru3_motherboard_info abituguru3_motherboards[] = { { "AUX3 Fan", 36, 2, 60, 1, 0 }, { NULL, 0, 0, 0, 0, 0 } } }, - { 0x001C, "unknown", { + { 0x001C, NULL /* Unknown, need DMI string */, { { "CPU Core", 0, 0, 10, 1, 0 }, { "DDR2", 1, 0, 20, 1, 0 }, { "DDR2 VTT", 2, 0, 10, 1, 0 }, @@ -935,9 +938,18 @@ static int __devinit abituguru3_probe(struct platform_device *pdev) goto abituguru3_probe_error; } data->sensors = abituguru3_motherboards[i].sensors; + printk(KERN_INFO ABIT_UGURU3_NAME ": found Abit uGuru3, motherboard " - "ID: %04X (%s)\n", (unsigned int)id, - abituguru3_motherboards[i].name); + "ID: %04X\n", (unsigned int)id); + +#ifdef CONFIG_DMI + if (!abituguru3_motherboards[i].dmi_name) { + printk(KERN_WARNING ABIT_UGURU3_NAME ": this motherboard was " + "not detected using DMI. Please send the output of " + "\"dmidecode\" to the abituguru3 maintainer" + "(see MAINTAINERS)\n"); + } +#endif /* Fill the sysfs attr array */ sysfs_attr_i = 0; @@ -1109,6 +1121,46 @@ static struct platform_driver abituguru3_driver = { .resume = abituguru3_resume }; +#ifdef CONFIG_DMI + +static int __init abituguru3_dmi_detect(void) +{ + const char *board_vendor, *board_name; + int i, err = (force) ? 1 : -ENODEV; + + board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); + if (!board_vendor || strcmp(board_vendor, "http://www.abit.com.tw/")) + return err; + + board_name = dmi_get_system_info(DMI_BOARD_NAME); + if (!board_name) + return err; + + for (i = 0; abituguru3_motherboards[i].id; i++) { + const char *dmi_name = abituguru3_motherboards[i].dmi_name; + if (dmi_name && !strcmp(dmi_name, board_name)) + break; + } + + if (!abituguru3_motherboards[i].id) + return 1; + + return 0; +} + +#else /* !CONFIG_DMI */ + +static inline int abituguru3_dmi_detect(void) +{ + return -ENODEV; +} + +#endif /* CONFIG_DMI */ + +/* FIXME: Manual detection should die eventually; we need to collect stable + * DMI model names first before we can rely entirely on CONFIG_DMI. + */ + static int __init abituguru3_detect(void) { /* See if there is an uguru3 there. An idle uGuru3 will hold 0x00 or @@ -1119,7 +1171,7 @@ static int __init abituguru3_detect(void) if (((data_val == 0x00) || (data_val == 0x08)) && ((cmd_val == 0xAC) || (cmd_val == 0x05) || (cmd_val == 0x55))) - return ABIT_UGURU3_BASE; + return 0; ABIT_UGURU3_DEBUG("no Abit uGuru3 found, data = 0x%02X, cmd = " "0x%02X\n", (unsigned int)data_val, (unsigned int)cmd_val); @@ -1127,7 +1179,7 @@ static int __init abituguru3_detect(void) if (force) { printk(KERN_INFO ABIT_UGURU3_NAME ": Assuming Abit uGuru3 is " "present because of \"force\" parameter\n"); - return ABIT_UGURU3_BASE; + return 0; } /* No uGuru3 found */ @@ -1138,27 +1190,29 @@ static struct platform_device *abituguru3_pdev; static int __init abituguru3_init(void) { - int address, err; struct resource res = { .flags = IORESOURCE_IO }; - -#ifdef CONFIG_DMI - const char *board_vendor = dmi_get_system_info(DMI_BOARD_VENDOR); - - /* safety check, refuse to load on non Abit motherboards */ - if (!force && (!board_vendor || - strcmp(board_vendor, "http://www.abit.com.tw/"))) - return -ENODEV; -#endif - - address = abituguru3_detect(); - if (address < 0) - return address; + int err; + + /* Attempt DMI detection first */ + err = abituguru3_dmi_detect(); + if (err < 0) + return err; + + /* Fall back to manual detection if there was no exact + * board name match, or force was specified. + */ + if (err > 0) { + err = abituguru3_detect(); + if (err) + return err; + } err = platform_driver_register(&abituguru3_driver); if (err) goto exit; - abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME, address); + abituguru3_pdev = platform_device_alloc(ABIT_UGURU3_NAME, + ABIT_UGURU3_BASE); if (!abituguru3_pdev) { printk(KERN_ERR ABIT_UGURU3_NAME ": Device allocation failed\n"); @@ -1166,8 +1220,8 @@ static int __init abituguru3_init(void) goto exit_driver_unregister; } - res.start = address; - res.end = address + ABIT_UGURU3_REGION_LENGTH - 1; + res.start = ABIT_UGURU3_BASE; + res.end = ABIT_UGURU3_BASE + ABIT_UGURU3_REGION_LENGTH - 1; res.name = ABIT_UGURU3_NAME; err = platform_device_add_resources(abituguru3_pdev, &res, 1); diff --git a/drivers/hwmon/adcxx.c b/drivers/hwmon/adcxx.c new file mode 100644 index 00000000000..242294db3db --- /dev/null +++ b/drivers/hwmon/adcxx.c @@ -0,0 +1,329 @@ +/* + * adcxx.c + * + * The adcxx4s is an AD converter family from National Semiconductor (NS). + * + * Copyright (c) 2008 Marc Pignat <marc.pignat@hevs.ch> + * + * The adcxx4s communicates with a host processor via an SPI/Microwire Bus + * interface. This driver supports the whole family of devices with name + * ADC<bb><c>S<sss>, where + * * bb is the resolution in number of bits (8, 10, 12) + * * c is the number of channels (1, 2, 4, 8) + * * sss is the maximum conversion speed (021 for 200 kSPS, 051 for 500 kSPS + * and 101 for 1 MSPS) + * + * Complete datasheets are available at National's website here: + * http://www.national.com/ds/DC/ADC<bb><c>S<sss>.pdf + * + * Handling of 8, 10 and 12 bits converters are the same, the + * unavailable bits are 0 :) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/device.h> +#include <linux/err.h> +#include <linux/sysfs.h> +#include <linux/hwmon.h> +#include <linux/hwmon-sysfs.h> +#include <linux/mutex.h> +#include <linux/spi/spi.h> + +#define DRVNAME "adcxx" + +struct adcxx { + struct device *hwmon_dev; + struct mutex lock; + u32 channels; + u32 reference; /* in millivolts */ +}; + +/* sysfs hook function */ +static ssize_t adcxx_read(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct spi_device *spi = to_spi_device(dev); + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + struct adcxx *adc = dev_get_drvdata(&spi->dev); + u8 tx_buf[2] = { attr->index << 3 }; /* other bits are don't care */ + u8 rx_buf[2]; + int status; + int value; + + if (mutex_lock_interruptible(&adc->lock)) + return -ERESTARTSYS; + + status = spi_write_then_read(spi, tx_buf, sizeof(tx_buf), + rx_buf, sizeof(rx_buf)); + if (status < 0) { + dev_warn(dev, "spi_write_then_read failed with status %d\n", + status); + goto out; + } + + value = (rx_buf[0] << 8) + rx_buf[1]; + dev_dbg(dev, "raw value = 0x%x\n", value); + + value = value * adc->reference >> 12; + status = sprintf(buf, "%d\n", value); +out: + mutex_unlock(&adc->lock); + return status; +} + +static ssize_t adcxx_show_min(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + /* The minimum reference is 0 for this chip family */ + return sprintf(buf, "0\n"); +} + +static ssize_t adcxx_show_max(struct device *dev, + struct device_attribute *devattr, char *buf) +{ + struct spi_device *spi = to_spi_device(dev); + struct adcxx *adc = dev_get_drvdata(&spi->dev); + u32 reference; + + if (mutex_lock_interruptible(&adc->lock)) + return -ERESTARTSYS; + + reference = adc->reference; + + mutex_unlock(&adc->lock); + + return sprintf(buf, "%d\n", reference); +} + +static ssize_t adcxx_set_max(struct device *dev, + struct device_attribute *devattr, const char *buf, size_t count) +{ + struct spi_device *spi = to_spi_device(dev); + struct adcxx *adc = dev_get_drvdata(&spi->dev); + unsigned long value; + + if (strict_strtoul(buf, 10, &value)) + return -EINVAL; + + if (mutex_lock_interruptible(&adc->lock)) + return -ERESTARTSYS; + + adc->reference = value; + + mutex_unlock(&adc->lock); + + return count; +} + +static ssize_t adcxx_show_name(struct device *dev, struct device_attribute + *devattr, char *buf) +{ + struct spi_device *spi = to_spi_device(dev); + struct adcxx *adc = dev_get_drvdata(&spi->dev); + + return sprintf(buf, "adcxx%ds\n", adc->channels); +} + +static struct sensor_device_attribute ad_input[] = { + SENSOR_ATTR(name, S_IRUGO, adcxx_show_name, NULL, 0), + SENSOR_ATTR(in_min, S_IRUGO, adcxx_show_min, NULL, 0), + SENSOR_ATTR(in_max, S_IWUSR | S_IRUGO, adcxx_show_max, + adcxx_set_max, 0), + SENSOR_ATTR(in0_input, S_IRUGO, adcxx_read, NULL, 0), + SENSOR_ATTR(in1_input, S_IRUGO, adcxx_read, NULL, 1), + SENSOR_ATTR(in2_input, S_IRUGO, adcxx_read, NULL, 2), + SENSOR_ATTR(in3_input, S_IRUGO, adcxx_read, NULL, 3), + SENSOR_ATTR(in4_input, S_IRUGO, adcxx_read, NULL, 4), + SENSOR_ATTR(in5_input, S_IRUGO, adcxx_read, NULL, 5), + SENSOR_ATTR(in6_input, S_IRUGO, adcxx_read, NULL, 6), + SENSOR_ATTR(in7_input, S_IRUGO, adcxx_read, NULL, 7), +}; + +/*----------------------------------------------------------------------*/ + +static int __devinit adcxx_probe(struct spi_device *spi, int channels) +{ + struct adcxx *adc; + int status; + int i; + + adc = kzalloc(sizeof *adc, GFP_KERNEL); + if (!adc) + return -ENOMEM; + + /* set a default value for the reference */ + adc->reference = 3300; + adc->channels = channels; + mutex_init(&adc->lock); + + mutex_lock(&adc->lock); + + dev_set_drvdata(&spi->dev, adc); + + for (i = 0; i < 3 + adc->channels; i++) { + status = device_create_file(&spi->dev, &ad_input[i].dev_attr); + if (status) { + dev_err(&spi->dev, "device_create_file failed.\n"); + goto out_err; + } + } + + adc->hwmon_dev = hwmon_device_register(&spi->dev); + if (IS_ERR(adc->hwmon_dev)) { + dev_err(&spi->dev, "hwmon_device_register failed.\n"); + status = PTR_ERR(adc->hwmon_dev); + goto out_err; + } + + mutex_unlock(&adc->lock); + return 0; + +out_err: + for (i--; i >= 0; i--) + device_remove_file(&spi->dev, &ad_input[i].dev_attr); + + dev_set_drvdata(&spi->dev, NULL); + mutex_unlock(&adc->lock); + kfree(adc); + return status; +} + +static int __devinit adcxx1s_probe(struct spi_device *spi) +{ + return adcxx_probe(spi, 1); +} + +static int __devinit adcxx2s_probe(struct spi_device *spi) +{ + return adcxx_probe(spi, 2); +} + +static int __devinit adcxx4s_probe(struct spi_device *spi) +{ + return adcxx_probe(spi, 4); +} + +static int __devinit adcxx8s_probe(struct spi_device *spi) +{ + return adcxx_probe(spi, 8); +} + +static int __devexit adcxx_remove(struct spi_device *spi) +{ + struct adcxx *adc = dev_get_drvdata(&spi->dev); + int i; + + mutex_lock(&adc->lock); + hwmon_device_unregister(adc->hwmon_dev); + for (i = 0; i < 3 + adc->channels; i++) + device_remove_file(&spi->dev, &ad_input[i].dev_attr); + + dev_set_drvdata(&spi->dev, NULL); + mutex_unlock(&adc->lock); + kfree(adc); + + return 0; +} + +static struct spi_driver adcxx1s_driver = { + .driver = { + .name = "adcxx1s", + .owner = THIS_MODULE, + }, + .probe = adcxx1s_probe, + .remove = __devexit_p(adcxx_remove), +}; + +static struct spi_driver adcxx2s_driver = { + .driver = { + .name = "adcxx2s", + .owner = THIS_MODULE, + }, + .probe = adcxx2s_probe, + .remove = __devexit_p(adcxx_remove), +}; + +static struct spi_driver adcxx4s_driver = { + .driver = { + .name = "adcxx4s", + .owner = THIS_MODULE, + }, + .probe = adcxx4s_probe, + .remove = __devexit_p(adcxx_remove), +}; + +static struct spi_driver adcxx8s_driver = { + .driver = { + .name = "adcxx8s", + .owner = THIS_MODULE, + }, + .probe = adcxx8s_probe, + .remove = __devexit_p(adcxx_remove), +}; + +static int __init init_adcxx(void) +{ + int status; + status = spi_register_driver(&adcxx1s_driver); + if (status) + goto reg_1_failed; + + status = spi_register_driver(&adcxx2s_driver); + if (status) + goto reg_2_failed; + + status = spi_register_driver(&adcxx4s_driver); + if (status) + goto reg_4_failed; + + status = spi_register_driver(&adcxx8s_driver); + if (status) + goto reg_8_failed; + + return status; + +reg_8_failed: + spi_unregister_driver(&adcxx4s_driver); +reg_4_failed: + spi_unregister_driver(&adcxx2s_driver); +reg_2_failed: + spi_unregister_driver(&adcxx1s_driver); +reg_1_failed: + return status; +} + +static void __exit exit_adcxx(void) +{ + spi_unregister_driver(&adcxx1s_driver); + spi_unregister_driver(&adcxx2s_driver); + spi_unregister_driver(&adcxx4s_driver); + spi_unregister_driver(&adcxx8s_driver); +} + +module_init(init_adcxx); +module_exit(exit_adcxx); + +MODULE_AUTHOR("Marc Pignat"); +MODULE_DESCRIPTION("National Semiconductor adcxx8sxxx Linux driver"); +MODULE_LICENSE("GPL"); + +MODULE_ALIAS("adcxx1s"); +MODULE_ALIAS("adcxx2s"); +MODULE_ALIAS("adcxx4s"); +MODULE_ALIAS("adcxx8s"); diff --git a/drivers/hwmon/applesmc.c b/drivers/hwmon/applesmc.c index aacc0c4b809..b06b8e090a2 100644 --- a/drivers/hwmon/applesmc.c +++ b/drivers/hwmon/applesmc.c @@ -98,6 +98,12 @@ static const char* temperature_sensors_sets[][36] = { "TH1P", "TH2P", "TH3P", "TMAP", "TMAS", "TMBS", "TM0P", "TM0S", "TM1P", "TM1S", "TM2P", "TM2S", "TM3S", "TM8P", "TM8S", "TM9P", "TM9S", "TN0H", "TS0C", NULL }, +/* Set 5: iMac */ + { "TC0D", "TA0P", "TG0P", "TG0D", "TG0H", "TH0P", "Tm0P", "TO0P", + "Tp0C", NULL }, +/* Set 6: Macbook3 set */ + { "TB0T", "TC0D", "TC0P", "TM0P", "TN0P", "TTF0", "TW0P", "Th0H", + "Th0S", "Th1H", NULL }, }; /* List of keys used to read/write fan speeds */ @@ -1223,6 +1229,10 @@ static __initdata struct dmi_match_data applesmc_dmi_data[] = { { .accelerometer = 0, .light = 0, .temperature_set = 3 }, /* MacPro: temperature set 4 */ { .accelerometer = 0, .light = 0, .temperature_set = 4 }, +/* iMac: temperature set 5 */ + { .accelerometer = 0, .light = 0, .temperature_set = 5 }, +/* MacBook3: accelerometer and temperature set 6 */ + { .accelerometer = 1, .light = 0, .temperature_set = 6 }, }; /* Note that DMI_MATCH(...,"MacBook") will match "MacBookPro1,1". @@ -1232,10 +1242,14 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacBookPro") }, (void*)&applesmc_dmi_data[0]}, - { applesmc_dmi_match, "Apple MacBook", { + { applesmc_dmi_match, "Apple MacBook (v2)", { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacBook2") }, (void*)&applesmc_dmi_data[1]}, + { applesmc_dmi_match, "Apple MacBook (v3)", { + DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), + DMI_MATCH(DMI_PRODUCT_NAME,"MacBook3") }, + (void*)&applesmc_dmi_data[6]}, { applesmc_dmi_match, "Apple MacBook", { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacBook") }, @@ -1248,6 +1262,10 @@ static __initdata struct dmi_system_id applesmc_whitelist[] = { DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), DMI_MATCH(DMI_PRODUCT_NAME,"MacPro2") }, (void*)&applesmc_dmi_data[4]}, + { applesmc_dmi_match, "Apple iMac", { + DMI_MATCH(DMI_BOARD_VENDOR,"Apple"), + DMI_MATCH(DMI_PRODUCT_NAME,"iMac") }, + (void*)&applesmc_dmi_data[5]}, { .ident = NULL } }; diff --git a/drivers/hwmon/coretemp.c b/drivers/hwmon/coretemp.c index 70239acecc8..93c17223b52 100644 --- a/drivers/hwmon/coretemp.c +++ b/drivers/hwmon/coretemp.c @@ -413,10 +413,11 @@ static int __init coretemp_init(void) for_each_online_cpu(i) { struct cpuinfo_x86 *c = &cpu_data(i); - /* check if family 6, models 0xe, 0xf, 0x16, 0x17 */ + /* check if family 6, models 0xe, 0xf, 0x16, 0x17, 0x1A */ if ((c->cpuid_level < 0) || (c->x86 != 0x6) || !((c->x86_model == 0xe) || (c->x86_model == 0xf) || - (c->x86_model == 0x16) || (c->x86_model == 0x17))) { + (c->x86_model == 0x16) || (c->x86_model == 0x17) || + (c->x86_model == 0x1A))) { /* supported CPU not found, but report the unknown family 6 CPU */ diff --git a/drivers/hwmon/hwmon-vid.c b/drivers/hwmon/hwmon-vid.c index 7b0a32c4dcf..c54eff92be4 100644 --- a/drivers/hwmon/hwmon-vid.c +++ b/drivers/hwmon/hwmon-vid.c @@ -37,13 +37,21 @@ * For VRD 10.0 and up, "VRD x.y Design Guide", * available at http://developer.intel.com/. * - * AMD NPT 0Fh (Athlon64 & Opteron), AMD Publication 32559, + * AMD Athlon 64 and AMD Opteron Processors, AMD Publication 26094, + * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/26094.PDF + * Table 74. VID Code Voltages + * This corresponds to an arbitrary VRM code of 24 in the functions below. + * These CPU models (K8 revision <= E) have 5 VID pins. See also: + * Revision Guide for AMD Athlon 64 and AMD Opteron Processors, AMD Publication 25759, + * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/25759.pdf + * + * AMD NPT Family 0Fh Processors, AMD Publication 32559, * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/32559.pdf * Table 71. VID Code Voltages - * AMD Opteron processors don't follow the Intel specifications. - * I'm going to "make up" 2.4 as the spec number for the Opterons. - * No good reason just a mnemonic for the 24x Opteron processor - * series. + * This corresponds to an arbitrary VRM code of 25 in the functions below. + * These CPU models (K8 revision >= F) have 6 VID pins. See also: + * Revision Guide for AMD NPT Family 0Fh Processors, AMD Publication 33610, + * http://www.amd.com/us-en/assets/content_type/white_papers_and_tech_docs/33610.pdf * * The 17 specification is in fact Intel Mobile Voltage Positioning - * (IMVP-II). You can find more information in the datasheet of Max1718 @@ -95,7 +103,12 @@ int vid_from_reg(int val, u8 vrm) return 0; return((1600000 - (val - 2) * 6250 + 500) / 1000); - case 24: /* AMD NPT 0Fh (Athlon64 & Opteron) */ + case 24: /* Athlon64 & Opteron */ + val &= 0x1f; + if (val == 0x1f) + return 0; + /* fall through */ + case 25: /* AMD NPT 0Fh */ val &= 0x3f; return (val < 32) ? 1550 - 25 * val : 775 - (25 * (val - 31)) / 2; @@ -157,11 +170,16 @@ struct vrm_model { #ifdef CONFIG_X86 -/* the stepping parameter is highest acceptable stepping for current line */ +/* + * The stepping parameter is highest acceptable stepping for current line. + * The model match must be exact for 4-bit values. For model values 0x10 + * and above (extended model), all models below the parameter will match. + */ static struct vrm_model vrm_models[] = { {X86_VENDOR_AMD, 0x6, ANY, ANY, 90}, /* Athlon Duron etc */ - {X86_VENDOR_AMD, 0xF, ANY, ANY, 24}, /* Athlon 64, Opteron and above VRM 24 */ + {X86_VENDOR_AMD, 0xF, 0x3F, ANY, 24}, /* Athlon 64, Opteron */ + {X86_VENDOR_AMD, 0xF, ANY, ANY, 25}, /* NPT family 0Fh */ {X86_VENDOR_INTEL, 0x6, 0x9, ANY, 13}, /* Pentium M (130 nm) */ {X86_VENDOR_INTEL, 0x6, 0xB, ANY, 85}, /* Tualatin */ {X86_VENDOR_INTEL, 0x6, 0xD, ANY, 13}, /* Pentium M (90 nm) */ @@ -189,6 +207,8 @@ static u8 find_vrm(u8 eff_family, u8 eff_model, u8 eff_stepping, u8 vendor) if (vrm_models[i].vendor==vendor) if ((vrm_models[i].eff_family==eff_family) && ((vrm_models[i].eff_model==eff_model) || + (vrm_models[i].eff_model >= 0x10 && + eff_model <= vrm_models[i].eff_model) || (vrm_models[i].eff_model==ANY)) && (eff_stepping <= vrm_models[i].eff_stepping)) return vrm_models[i].vrm_type; diff --git a/drivers/hwmon/i5k_amb.c b/drivers/hwmon/i5k_amb.c index f9e2ed621f7..2ede9388096 100644 --- a/drivers/hwmon/i5k_amb.c +++ b/drivers/hwmon/i5k_amb.c @@ -81,6 +81,8 @@ static unsigned long amb_reg_temp(unsigned int amb) #define MAX_AMBS_PER_CHANNEL 16 #define MAX_AMBS (MAX_MEM_CHANNELS * \ MAX_AMBS_PER_CHANNEL) +#define CHANNEL_SHIFT 4 +#define DIMM_MASK 0xF /* * Ugly hack: For some reason the highest bit is set if there * are _any_ DIMMs in the channel. Attempting to read from @@ -89,7 +91,7 @@ static unsigned long amb_reg_temp(unsigned int amb) * might prevent us from seeing the 16th DIMM in the channel. */ #define REAL_MAX_AMBS_PER_CHANNEL 15 -#define KNOBS_PER_AMB 5 +#define KNOBS_PER_AMB 6 static unsigned long amb_num_from_reg(unsigned int byte_num, unsigned int bit) { @@ -238,6 +240,16 @@ static ssize_t show_amb_temp(struct device *dev, 500 * amb_read_byte(data, amb_reg_temp(attr->index))); } +static ssize_t show_label(struct device *dev, + struct device_attribute *devattr, + char *buf) +{ + struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); + + return sprintf(buf, "Ch. %d DIMM %d\n", attr->index >> CHANNEL_SHIFT, + attr->index & DIMM_MASK); +} + static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev) { int i, j, k, d = 0; @@ -268,6 +280,20 @@ static int __devinit i5k_amb_hwmon_init(struct platform_device *pdev) continue; d++; + /* sysfs label */ + iattr = data->attrs + data->num_attrs; + snprintf(iattr->name, AMB_SYSFS_NAME_LEN, + "temp%d_label", d); + iattr->s_attr.dev_attr.attr.name = iattr->name; + iattr->s_attr.dev_attr.attr.mode = S_IRUGO; + iattr->s_attr.dev_attr.show = show_label; + iattr->s_attr.index = k; + res = device_create_file(&pdev->dev, + &iattr->s_attr.dev_attr); + if (res) + goto exit_remove; + data->num_attrs++; + /* Temperature sysfs knob */ iattr = data->attrs + data->num_attrs; snprintf(iattr->name, AMB_SYSFS_NAME_LEN, diff --git a/drivers/hwmon/ibmaem.c b/drivers/hwmon/ibmaem.c index c9416e65748..0f70dc20410 100644 --- a/drivers/hwmon/ibmaem.c +++ b/drivers/hwmon/ibmaem.c @@ -1,6 +1,6 @@ /* - * A hwmon driver for the IBM Active Energy Manager temperature/power sensors - * and capping functionality. + * A hwmon driver for the IBM System Director Active Energy Manager (AEM) + * temperature/power/energy sensors and capping functionality. * Copyright (C) 2008 IBM * * Author: Darrick J. Wong <djwong@us.ibm.com> @@ -463,12 +463,18 @@ static int aem_read_sensor(struct aem_data *data, u8 elt, u8 reg, } /* Update AEM energy registers */ +static void update_aem_energy_one(struct aem_data *data, int which) +{ + aem_read_sensor(data, AEM_ENERGY_ELEMENT, which, + &data->energy[which], 8); +} + static void update_aem_energy(struct aem_data *data) { - aem_read_sensor(data, AEM_ENERGY_ELEMENT, 0, &data->energy[0], 8); + update_aem_energy_one(data, 0); if (data->ver_major < 2) return; - aem_read_sensor(data, AEM_ENERGY_ELEMENT, 1, &data->energy[1], 8); + update_aem_energy_one(data, 1); } /* Update all AEM1 sensors */ @@ -676,7 +682,8 @@ static int aem_find_aem2(struct aem_ipmi_data *data, return -ETIMEDOUT; if (data->rx_result || data->rx_msg_len != sizeof(*fi_resp) || - memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id))) + memcmp(&fi_resp->id, &system_x_id, sizeof(system_x_id)) || + fi_resp->num_instances <= instance_num) return -ENOENT; return 0; @@ -849,7 +856,7 @@ static ssize_t aem_show_power(struct device *dev, struct timespec b, a; mutex_lock(&data->lock); - update_aem_energy(data); + update_aem_energy_one(data, attr->index); getnstimeofday(&b); before = data->energy[attr->index]; @@ -861,7 +868,7 @@ static ssize_t aem_show_power(struct device *dev, return 0; } - update_aem_energy(data); + update_aem_energy_one(data, attr->index); getnstimeofday(&a); after = data->energy[attr->index]; mutex_unlock(&data->lock); @@ -880,7 +887,9 @@ static ssize_t aem_show_energy(struct device *dev, { struct sensor_device_attribute *attr = to_sensor_dev_attr(devattr); struct aem_data *a = dev_get_drvdata(dev); - a->update(a); + mutex_lock(&a->lock); + update_aem_energy_one(a, attr->index); + mutex_unlock(&a->lock); return sprintf(buf, "%llu\n", (unsigned long long)a->energy[attr->index] * 1000); @@ -1104,7 +1113,7 @@ static void __exit aem_exit(void) } MODULE_AUTHOR("Darrick J. Wong <djwong@us.ibm.com>"); -MODULE_DESCRIPTION("IBM Active Energy Manager power/temp sensor driver"); +MODULE_DESCRIPTION("IBM AEM power/temp/energy sensor driver"); MODULE_LICENSE("GPL"); module_init(aem_init); diff --git a/drivers/hwmon/w83791d.c b/drivers/hwmon/w83791d.c index daa7d121483..de21142d106 100644 --- a/drivers/hwmon/w83791d.c +++ b/drivers/hwmon/w83791d.c @@ -1055,9 +1055,10 @@ static int w83791d_probe(struct i2c_client *client, { struct w83791d_data *data; struct device *dev = &client->dev; - int i, val1, err; + int i, err; #ifdef DEBUG + int val1; val1 = w83791d_read(client, W83791D_REG_DID_VID4); dev_dbg(dev, "Device ID version: %d.%d (0x%02x)\n", (val1 >> 5) & 0x07, (val1 >> 1) & 0x0f, val1); diff --git a/drivers/input/evdev.c b/drivers/input/evdev.c index 2d65411f676..a92d8156755 100644 --- a/drivers/input/evdev.c +++ b/drivers/input/evdev.c @@ -647,6 +647,47 @@ static int str_to_user(const char *str, unsigned int maxlen, void __user *p) return copy_to_user(p, str, len) ? -EFAULT : len; } +#define OLD_KEY_MAX 0x1ff +static int handle_eviocgbit(struct input_dev *dev, unsigned int cmd, void __user *p, int compat_mode) +{ + static unsigned long keymax_warn_time; + unsigned long *bits; + int len; + + switch (_IOC_NR(cmd) & EV_MAX) { + + case 0: bits = dev->evbit; len = EV_MAX; break; + case EV_KEY: bits = dev->keybit; len = KEY_MAX; break; + case EV_REL: bits = dev->relbit; len = REL_MAX; break; + case EV_ABS: bits = dev->absbit; len = ABS_MAX; break; + case EV_MSC: bits = dev->mscbit; len = MSC_MAX; break; + case EV_LED: bits = dev->ledbit; len = LED_MAX; break; + case EV_SND: bits = dev->sndbit; len = SND_MAX; break; + case EV_FF: bits = dev->ffbit; len = FF_MAX; break; + case EV_SW: bits = dev->swbit; len = SW_MAX; break; + default: return -EINVAL; + } + + /* + * Work around bugs in userspace programs that like to do + * EVIOCGBIT(EV_KEY, KEY_MAX) and not realize that 'len' + * should be in bytes, not in bits. + */ + if ((_IOC_NR(cmd) & EV_MAX) == EV_KEY && _IOC_SIZE(cmd) == OLD_KEY_MAX) { + len = OLD_KEY_MAX; + if (printk_timed_ratelimit(&keymax_warn_time, 10 * 1000)) + printk(KERN_WARNING + "evdev.c(EVIOCGBIT): Suspicious buffer size %d, " + "limiting output to %d bytes. See " + "http://userweb.kernel.org/~dtor/eviocgbit-bug.html\n", + OLD_KEY_MAX, + BITS_TO_LONGS(OLD_KEY_MAX) * sizeof(long)); + } + + return bits_to_user(bits, len, _IOC_SIZE(cmd), p, compat_mode); +} +#undef OLD_KEY_MAX + static long evdev_do_ioctl(struct file *file, unsigned int cmd, void __user *p, int compat_mode) { @@ -733,26 +774,8 @@ static long evdev_do_ioctl(struct file *file, unsigned int cmd, if (_IOC_DIR(cmd) == _IOC_READ) { - if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0))) { - - unsigned long *bits; - int len; - - switch (_IOC_NR(cmd) & EV_MAX) { - - case 0: bits = dev->evbit; len = EV_MAX; break; - case EV_KEY: bits = dev->keybit; len = KEY_MAX; break; - case EV_REL: bits = dev->relbit; len = REL_MAX; break; - case EV_ABS: bits = dev->absbit; len = ABS_MAX; break; - case EV_MSC: bits = dev->mscbit; len = MSC_MAX; break; - case EV_LED: bits = dev->ledbit; len = LED_MAX; break; - case EV_SND: bits = dev->sndbit; len = SND_MAX; break; - case EV_FF: bits = dev->ffbit; len = FF_MAX; break; - case EV_SW: bits = dev->swbit; len = SW_MAX; break; - default: return -EINVAL; - } - return bits_to_user(bits, len, _IOC_SIZE(cmd), p, compat_mode); - } + if ((_IOC_NR(cmd) & ~EV_MAX) == _IOC_NR(EVIOCGBIT(0, 0))) + return handle_eviocgbit(dev, cmd, p, compat_mode); if (_IOC_NR(cmd) == _IOC_NR(EVIOCGKEY(0))) return bits_to_user(dev->key, KEY_MAX, _IOC_SIZE(cmd), diff --git a/drivers/input/joystick/xpad.c b/drivers/input/joystick/xpad.c index 87d3e7eabff..6791be81eb2 100644 --- a/drivers/input/joystick/xpad.c +++ b/drivers/input/joystick/xpad.c @@ -127,6 +127,7 @@ static const struct xpad_device { { 0x0738, 0x4716, "Mad Catz Wired Xbox 360 Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX360 }, { 0x0738, 0x6040, "Mad Catz Beat Pad Pro", MAP_DPAD_TO_BUTTONS, XTYPE_XBOX }, { 0x0c12, 0x8802, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, + { 0x0c12, 0x880a, "Pelican Eclipse PL-2023", MAP_DPAD_TO_AXES, XTYPE_XBOX }, { 0x0c12, 0x8810, "Zeroplus Xbox Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, { 0x0c12, 0x9902, "HAMA VibraX - *FAULTY HARDWARE*", MAP_DPAD_TO_AXES, XTYPE_XBOX }, { 0x0e4c, 0x1097, "Radica Gamester Controller", MAP_DPAD_TO_AXES, XTYPE_XBOX }, diff --git a/drivers/input/keyboard/gpio_keys.c b/drivers/input/keyboard/gpio_keys.c index be58730e636..3f48279f219 100644 --- a/drivers/input/keyboard/gpio_keys.c +++ b/drivers/input/keyboard/gpio_keys.c @@ -118,6 +118,7 @@ static int __devinit gpio_keys_probe(struct platform_device *pdev) unsigned int type = button->type ?: EV_KEY; bdata->input = input; + bdata->button = button; setup_timer(&bdata->timer, gpio_check_button, (unsigned long)bdata); @@ -256,7 +257,7 @@ static int gpio_keys_resume(struct platform_device *pdev) #define gpio_keys_resume NULL #endif -struct platform_driver gpio_keys_device_driver = { +static struct platform_driver gpio_keys_device_driver = { .probe = gpio_keys_probe, .remove = __devexit_p(gpio_keys_remove), .suspend = gpio_keys_suspend, diff --git a/drivers/input/mouse/Kconfig b/drivers/input/mouse/Kconfig index 7bbea097cda..f996546fc44 100644 --- a/drivers/input/mouse/Kconfig +++ b/drivers/input/mouse/Kconfig @@ -130,6 +130,29 @@ config MOUSE_APPLETOUCH To compile this driver as a module, choose M here: the module will be called appletouch. +config MOUSE_BCM5974 + tristate "Apple USB BCM5974 Multitouch trackpad support" + depends on USB_ARCH_HAS_HCD + select USB + help + Say Y here if you have an Apple USB BCM5974 Multitouch + trackpad. + + The BCM5974 is the multitouch trackpad found in the Macbook + Air (JAN2008) and Macbook Pro Penryn (FEB2008) laptops. + + It is also found in the IPhone (2007) and Ipod Touch (2008). + + This driver provides multitouch functionality together with + the synaptics X11 driver. + + The interface is currently identical to the appletouch interface, + for further information, see + <file:Documentation/input/appletouch.txt>. + + To compile this driver as a module, choose M here: the + module will be called bcm5974. + config MOUSE_INPORT tristate "InPort/MS/ATIXL busmouse" depends on ISA diff --git a/drivers/input/mouse/Makefile b/drivers/input/mouse/Makefile index 9e6e3633082..d4d20251609 100644 --- a/drivers/input/mouse/Makefile +++ b/drivers/input/mouse/Makefile @@ -6,6 +6,7 @@ obj-$(CONFIG_MOUSE_AMIGA) += amimouse.o obj-$(CONFIG_MOUSE_APPLETOUCH) += appletouch.o +obj-$(CONFIG_MOUSE_BCM5974) += bcm5974.o obj-$(CONFIG_MOUSE_ATARI) += atarimouse.o obj-$(CONFIG_MOUSE_RISCPC) += rpcmouse.o obj-$(CONFIG_MOUSE_INPORT) += inport.o diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c new file mode 100644 index 00000000000..2ec921bf3c6 --- /dev/null +++ b/drivers/input/mouse/bcm5974.c @@ -0,0 +1,681 @@ +/* + * Apple USB BCM5974 (Macbook Air and Penryn Macbook Pro) multitouch driver + * + * Copyright (C) 2008 Henrik Rydberg (rydberg@euromail.se) + * + * The USB initialization and package decoding was made by + * Scott Shawcroft as part of the touchd user-space driver project: + * Copyright (C) 2008 Scott Shawcroft (scott.shawcroft@gmail.com) + * + * The BCM5974 driver is based on the appletouch driver: + * Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com) + * Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net) + * Copyright (C) 2005 Stelian Pop (stelian@popies.net) + * Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de) + * Copyright (C) 2005 Peter Osterlund (petero2@telia.com) + * Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch) + * Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/init.h> +#include <linux/slab.h> +#include <linux/module.h> +#include <linux/usb/input.h> +#include <linux/hid.h> +#include <linux/mutex.h> + +#define USB_VENDOR_ID_APPLE 0x05ac + +/* MacbookAir, aka wellspring */ +#define USB_DEVICE_ID_APPLE_WELLSPRING_ANSI 0x0223 +#define USB_DEVICE_ID_APPLE_WELLSPRING_ISO 0x0224 +#define USB_DEVICE_ID_APPLE_WELLSPRING_JIS 0x0225 +/* MacbookProPenryn, aka wellspring2 */ +#define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230 +#define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231 +#define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232 + +#define BCM5974_DEVICE(prod) { \ + .match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \ + USB_DEVICE_ID_MATCH_INT_CLASS | \ + USB_DEVICE_ID_MATCH_INT_PROTOCOL), \ + .idVendor = USB_VENDOR_ID_APPLE, \ + .idProduct = (prod), \ + .bInterfaceClass = USB_INTERFACE_CLASS_HID, \ + .bInterfaceProtocol = USB_INTERFACE_PROTOCOL_MOUSE \ +} + +/* table of devices that work with this driver */ +static const struct usb_device_id bcm5974_table [] = { + /* MacbookAir1.1 */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING_JIS), + /* MacbookProPenryn */ + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ISO), + BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_JIS), + /* Terminating entry */ + {} +}; +MODULE_DEVICE_TABLE(usb, bcm5974_table); + +MODULE_AUTHOR("Henrik Rydberg"); +MODULE_DESCRIPTION("Apple USB BCM5974 multitouch driver"); +MODULE_LICENSE("GPL"); + +#define dprintk(level, format, a...)\ + { if (debug >= level) printk(KERN_DEBUG format, ##a); } + +static int debug = 1; +module_param(debug, int, 0644); +MODULE_PARM_DESC(debug, "Activate debugging output"); + +/* button data structure */ +struct bt_data { + u8 unknown1; /* constant */ + u8 button; /* left button */ + u8 rel_x; /* relative x coordinate */ + u8 rel_y; /* relative y coordinate */ +}; + +/* trackpad header structure */ +struct tp_header { + u8 unknown1[16]; /* constants, timers, etc */ + u8 fingers; /* number of fingers on trackpad */ + u8 unknown2[9]; /* constants, timers, etc */ +}; + +/* trackpad finger structure */ +struct tp_finger { + __le16 origin; /* left/right origin? */ + __le16 abs_x; /* absolute x coodinate */ + __le16 abs_y; /* absolute y coodinate */ + __le16 rel_x; /* relative x coodinate */ + __le16 rel_y; /* relative y coodinate */ + __le16 size_major; /* finger size, major axis? */ + __le16 size_minor; /* finger size, minor axis? */ + __le16 orientation; /* 16384 when point, else 15 bit angle */ + __le16 force_major; /* trackpad force, major axis? */ + __le16 force_minor; /* trackpad force, minor axis? */ + __le16 unused[3]; /* zeros */ + __le16 multi; /* one finger: varies, more fingers: constant */ +}; + +/* trackpad data structure, empirically at least ten fingers */ +struct tp_data { + struct tp_header header; + struct tp_finger finger[16]; +}; + +/* device-specific parameters */ +struct bcm5974_param { + int dim; /* logical dimension */ + int fuzz; /* logical noise value */ + int devmin; /* device minimum reading */ + int devmax; /* device maximum reading */ +}; + +/* device-specific configuration */ +struct bcm5974_config { + int ansi, iso, jis; /* the product id of this device */ + int bt_ep; /* the endpoint of the button interface */ + int bt_datalen; /* data length of the button interface */ + int tp_ep; /* the endpoint of the trackpad interface */ + int tp_datalen; /* data length of the trackpad interface */ + struct bcm5974_param p; /* finger pressure limits */ + struct bcm5974_param w; /* finger width limits */ + struct bcm5974_param x; /* horizontal limits */ + struct bcm5974_param y; /* vertical limits */ +}; + +/* logical device structure */ +struct bcm5974 { + char phys[64]; + struct usb_device *udev; /* usb device */ + struct usb_interface *intf; /* our interface */ + struct input_dev *input; /* input dev */ + struct bcm5974_config cfg; /* device configuration */ + struct mutex pm_mutex; /* serialize access to open/suspend */ + int opened; /* 1: opened, 0: closed */ + struct urb *bt_urb; /* button usb request block */ + struct bt_data *bt_data; /* button transferred data */ + struct urb *tp_urb; /* trackpad usb request block */ + struct tp_data *tp_data; /* trackpad transferred data */ +}; + +/* logical dimensions */ +#define DIM_PRESSURE 256 /* maximum finger pressure */ +#define DIM_WIDTH 16 /* maximum finger width */ +#define DIM_X 1280 /* maximum trackpad x value */ +#define DIM_Y 800 /* maximum trackpad y value */ + +/* logical signal quality */ +#define SN_PRESSURE 45 /* pressure signal-to-noise ratio */ +#define SN_WIDTH 100 /* width signal-to-noise ratio */ +#define SN_COORD 250 /* coordinate signal-to-noise ratio */ + +/* device constants */ +static const struct bcm5974_config bcm5974_config_table[] = { + { + USB_DEVICE_ID_APPLE_WELLSPRING_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING_JIS, + 0x84, sizeof(struct bt_data), + 0x81, sizeof(struct tp_data), + { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 }, + { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, + { DIM_X, DIM_X / SN_COORD, -4824, 5342 }, + { DIM_Y, DIM_Y / SN_COORD, -172, 5820 } + }, + { + USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI, + USB_DEVICE_ID_APPLE_WELLSPRING2_ISO, + USB_DEVICE_ID_APPLE_WELLSPRING2_JIS, + 0x84, sizeof(struct bt_data), + 0x81, sizeof(struct tp_data), + { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 }, + { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 }, + { DIM_X, DIM_X / SN_COORD, -4824, 4824 }, + { DIM_Y, DIM_Y / SN_COORD, -172, 4290 } + }, + {} +}; + +/* return the device-specific configuration by device */ +static const struct bcm5974_config *bcm5974_get_config(struct usb_device *udev) +{ + u16 id = le16_to_cpu(udev->descriptor.idProduct); + const struct bcm5974_config *cfg; + + for (cfg = bcm5974_config_table; cfg->ansi; ++cfg) + if (cfg->ansi == id || cfg->iso == id || cfg->jis == id) + return cfg; + + return bcm5974_config_table; +} + +/* convert 16-bit little endian to signed integer */ +static inline int raw2int(__le16 x) +{ + return (signed short)le16_to_cpu(x); +} + +/* scale device data to logical dimensions (asserts devmin < devmax) */ +static inline int int2scale(const struct bcm5974_param *p, int x) +{ + return x * p->dim / (p->devmax - p->devmin); +} + +/* all logical value ranges are [0,dim). */ +static inline int int2bound(const struct bcm5974_param *p, int x) +{ + int s = int2scale(p, x); + + return clamp_val(s, 0, p->dim - 1); +} + +/* setup which logical events to report */ +static void setup_events_to_report(struct input_dev *input_dev, + const struct bcm5974_config *cfg) +{ + __set_bit(EV_ABS, input_dev->evbit); + + input_set_abs_params(input_dev, ABS_PRESSURE, + 0, cfg->p.dim, cfg->p.fuzz, 0); + input_set_abs_params(input_dev, ABS_TOOL_WIDTH, + 0, cfg->w.dim, cfg->w.fuzz, 0); + input_set_abs_params(input_dev, ABS_X, + 0, cfg->x.dim, cfg->x.fuzz, 0); + input_set_abs_params(input_dev, ABS_Y, + 0, cfg->y.dim, cfg->y.fuzz, 0); + + __set_bit(EV_KEY, input_dev->evbit); + __set_bit(BTN_TOOL_FINGER, input_dev->keybit); + __set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit); + __set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit); + __set_bit(BTN_LEFT, input_dev->keybit); +} + +/* report button data as logical button state */ +static int report_bt_state(struct bcm5974 *dev, int size) +{ + if (size != sizeof(struct bt_data)) + return -EIO; + + input_report_key(dev->input, BTN_LEFT, dev->bt_data->button); + input_sync(dev->input); + + return 0; +} + +/* report trackpad data as logical trackpad state */ +static int report_tp_state(struct bcm5974 *dev, int size) +{ + const struct bcm5974_config *c = &dev->cfg; + const struct tp_finger *f = dev->tp_data->finger; + struct input_dev *input = dev->input; + const int fingers = (size - 26) / 28; + int p = 0, w, x, y, n = 0; + + if (size < 26 || (size - 26) % 28 != 0) + return -EIO; + + if (fingers) { + p = raw2int(f->force_major); + w = raw2int(f->size_major); + x = raw2int(f->abs_x); + y = raw2int(f->abs_y); + n = p > 0 ? fingers : 0; + + dprintk(9, + "bcm5974: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n", + p, w, x, y, n); + + input_report_abs(input, ABS_TOOL_WIDTH, int2bound(&c->w, w)); + input_report_abs(input, ABS_X, int2bound(&c->x, x - c->x.devmin)); + input_report_abs(input, ABS_Y, int2bound(&c->y, c->y.devmax - y)); + } + + input_report_abs(input, ABS_PRESSURE, int2bound(&c->p, p)); + + input_report_key(input, BTN_TOOL_FINGER, n == 1); + input_report_key(input, BTN_TOOL_DOUBLETAP, n == 2); + input_report_key(input, BTN_TOOL_TRIPLETAP, n > 2); + + input_sync(input); + + return 0; +} + +/* Wellspring initialization constants */ +#define BCM5974_WELLSPRING_MODE_READ_REQUEST_ID 1 +#define BCM5974_WELLSPRING_MODE_WRITE_REQUEST_ID 9 +#define BCM5974_WELLSPRING_MODE_REQUEST_VALUE 0x300 +#define BCM5974_WELLSPRING_MODE_REQUEST_INDEX 0 +#define BCM5974_WELLSPRING_MODE_VENDOR_VALUE 0x01 + +static int bcm5974_wellspring_mode(struct bcm5974 *dev) +{ + char *data = kmalloc(8, GFP_KERNEL); + int retval = 0, size; + + if (!data) { + err("bcm5974: out of memory"); + retval = -ENOMEM; + goto out; + } + + /* read configuration */ + size = usb_control_msg(dev->udev, usb_rcvctrlpipe(dev->udev, 0), + BCM5974_WELLSPRING_MODE_READ_REQUEST_ID, + USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + BCM5974_WELLSPRING_MODE_REQUEST_VALUE, + BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000); + + if (size != 8) { + err("bcm5974: could not read from device"); + retval = -EIO; + goto out; + } + + /* apply the mode switch */ + data[0] = BCM5974_WELLSPRING_MODE_VENDOR_VALUE; + + /* write configuration */ + size = usb_control_msg(dev->udev, usb_sndctrlpipe(dev->udev, 0), + BCM5974_WELLSPRING_MODE_WRITE_REQUEST_ID, + USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE, + BCM5974_WELLSPRING_MODE_REQUEST_VALUE, + BCM5974_WELLSPRING_MODE_REQUEST_INDEX, data, 8, 5000); + + if (size != 8) { + err("bcm5974: could not write to device"); + retval = -EIO; + goto out; + } + + dprintk(2, "bcm5974: switched to wellspring mode.\n"); + + out: + kfree(data); + return retval; +} + +static void bcm5974_irq_button(struct urb *urb) +{ + struct bcm5974 *dev = urb->context; + int error; + + switch (urb->status) { + case 0: + break; + case -EOVERFLOW: + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + dbg("bcm5974: button urb shutting down: %d", urb->status); + return; + default: + dbg("bcm5974: button urb status: %d", urb->status); + goto exit; + } + + if (report_bt_state(dev, dev->bt_urb->actual_length)) + dprintk(1, "bcm5974: bad button package, length: %d\n", + dev->bt_urb->actual_length); + +exit: + error = usb_submit_urb(dev->bt_urb, GFP_ATOMIC); + if (error) + err("bcm5974: button urb failed: %d", error); +} + +static void bcm5974_irq_trackpad(struct urb *urb) +{ + struct bcm5974 *dev = urb->context; + int error; + + switch (urb->status) { + case 0: + break; + case -EOVERFLOW: + case -ECONNRESET: + case -ENOENT: + case -ESHUTDOWN: + dbg("bcm5974: trackpad urb shutting down: %d", urb->status); + return; + default: + dbg("bcm5974: trackpad urb status: %d", urb->status); + goto exit; + } + + /* control response ignored */ + if (dev->tp_urb->actual_length == 2) + goto exit; + + if (report_tp_state(dev, dev->tp_urb->actual_length)) + dprintk(1, "bcm5974: bad trackpad package, length: %d\n", + dev->tp_urb->actual_length); + +exit: + error = usb_submit_urb(dev->tp_urb, GFP_ATOMIC); + if (error) + err("bcm5974: trackpad urb failed: %d", error); +} + +/* + * The Wellspring trackpad, like many recent Apple trackpads, share + * the usb device with the keyboard. Since keyboards are usually + * handled by the HID system, the device ends up being handled by two + * modules. Setting up the device therefore becomes slightly + * complicated. To enable multitouch features, a mode switch is + * required, which is usually applied via the control interface of the + * device. It can be argued where this switch should take place. In + * some drivers, like appletouch, the switch is made during + * probe. However, the hid module may also alter the state of the + * device, resulting in trackpad malfunction under certain + * circumstances. To get around this problem, there is at least one + * example that utilizes the USB_QUIRK_RESET_RESUME quirk in order to + * recieve a reset_resume request rather than the normal resume. + * Since the implementation of reset_resume is equal to mode switch + * plus start_traffic, it seems easier to always do the switch when + * starting traffic on the device. + */ +static int bcm5974_start_traffic(struct bcm5974 *dev) +{ + if (bcm5974_wellspring_mode(dev)) { + dprintk(1, "bcm5974: mode switch failed\n"); + goto error; + } + + if (usb_submit_urb(dev->bt_urb, GFP_KERNEL)) + goto error; + + if (usb_submit_urb(dev->tp_urb, GFP_KERNEL)) + goto err_kill_bt; + + return 0; + +err_kill_bt: + usb_kill_urb(dev->bt_urb); +error: + return -EIO; +} + +static void bcm5974_pause_traffic(struct bcm5974 *dev) +{ + usb_kill_urb(dev->tp_urb); + usb_kill_urb(dev->bt_urb); +} + +/* + * The code below implements open/close and manual suspend/resume. + * All functions may be called in random order. + * + * Opening a suspended device fails with EACCES - permission denied. + * + * Failing a resume leaves the device resumed but closed. + */ +static int bcm5974_open(struct input_dev *input) +{ + struct bcm5974 *dev = input_get_drvdata(input); + int error; + + error = usb_autopm_get_interface(dev->intf); + if (error) + return error; + + mutex_lock(&dev->pm_mutex); + + error = bcm5974_start_traffic(dev); + if (!error) + dev->opened = 1; + + mutex_unlock(&dev->pm_mutex); + + if (error) + usb_autopm_put_interface(dev->intf); + + return error; +} + +static void bcm5974_close(struct input_dev *input) +{ + struct bcm5974 *dev = input_get_drvdata(input); + + mutex_lock(&dev->pm_mutex); + + bcm5974_pause_traffic(dev); + dev->opened = 0; + + mutex_unlock(&dev->pm_mutex); + + usb_autopm_put_interface(dev->intf); +} + +static int bcm5974_suspend(struct usb_interface *iface, pm_message_t message) +{ + struct bcm5974 *dev = usb_get_intfdata(iface); + + mutex_lock(&dev->pm_mutex); + + if (dev->opened) + bcm5974_pause_traffic(dev); + + mutex_unlock(&dev->pm_mutex); + + return 0; +} + +static int bcm5974_resume(struct usb_interface *iface) +{ + struct bcm5974 *dev = usb_get_intfdata(iface); + int error = 0; + + mutex_lock(&dev->pm_mutex); + + if (dev->opened) + error = bcm5974_start_traffic(dev); + + mutex_unlock(&dev->pm_mutex); + + return error; +} + +static int bcm5974_probe(struct usb_interface *iface, + const struct usb_device_id *id) +{ + struct usb_device *udev = interface_to_usbdev(iface); + const struct bcm5974_config *cfg; + struct bcm5974 *dev; + struct input_dev *input_dev; + int error = -ENOMEM; + + /* find the product index */ + cfg = bcm5974_get_config(udev); + + /* allocate memory for our device state and initialize it */ + dev = kzalloc(sizeof(struct bcm5974), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!dev || !input_dev) { + err("bcm5974: out of memory"); + goto err_free_devs; + } + + dev->udev = udev; + dev->intf = iface; + dev->input = input_dev; + dev->cfg = *cfg; + mutex_init(&dev->pm_mutex); + + /* setup urbs */ + dev->bt_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->bt_urb) + goto err_free_devs; + + dev->tp_urb = usb_alloc_urb(0, GFP_KERNEL); + if (!dev->tp_urb) + goto err_free_bt_urb; + + dev->bt_data = usb_buffer_alloc(dev->udev, + dev->cfg.bt_datalen, GFP_KERNEL, + &dev->bt_urb->transfer_dma); + if (!dev->bt_data) + goto err_free_urb; + + dev->tp_data = usb_buffer_alloc(dev->udev, + dev->cfg.tp_datalen, GFP_KERNEL, + &dev->tp_urb->transfer_dma); + if (!dev->tp_data) + goto err_free_bt_buffer; + + usb_fill_int_urb(dev->bt_urb, udev, + usb_rcvintpipe(udev, cfg->bt_ep), + dev->bt_data, dev->cfg.bt_datalen, + bcm5974_irq_button, dev, 1); + + usb_fill_int_urb(dev->tp_urb, udev, + usb_rcvintpipe(udev, cfg->tp_ep), + dev->tp_data, dev->cfg.tp_datalen, + bcm5974_irq_trackpad, dev, 1); + + /* create bcm5974 device */ + usb_make_path(udev, dev->phys, sizeof(dev->phys)); + strlcat(dev->phys, "/input0", sizeof(dev->phys)); + + input_dev->name = "bcm5974"; + input_dev->phys = dev->phys; + usb_to_input_id(dev->udev, &input_dev->id); + input_dev->dev.parent = &iface->dev; + + input_set_drvdata(input_dev, dev); + + input_dev->open = bcm5974_open; + input_dev->close = bcm5974_close; + + setup_events_to_report(input_dev, cfg); + + error = input_register_device(dev->input); + if (error) + goto err_free_buffer; + + /* save our data pointer in this interface device */ + usb_set_intfdata(iface, dev); + + return 0; + +err_free_buffer: + usb_buffer_free(dev->udev, dev->cfg.tp_datalen, + dev->tp_data, dev->tp_urb->transfer_dma); +err_free_bt_buffer: + usb_buffer_free(dev->udev, dev->cfg.bt_datalen, + dev->bt_data, dev->bt_urb->transfer_dma); +err_free_urb: + usb_free_urb(dev->tp_urb); +err_free_bt_urb: + usb_free_urb(dev->bt_urb); +err_free_devs: + usb_set_intfdata(iface, NULL); + input_free_device(input_dev); + kfree(dev); + return error; +} + +static void bcm5974_disconnect(struct usb_interface *iface) +{ + struct bcm5974 *dev = usb_get_intfdata(iface); + + usb_set_intfdata(iface, NULL); + + input_unregister_device(dev->input); + usb_buffer_free(dev->udev, dev->cfg.tp_datalen, + dev->tp_data, dev->tp_urb->transfer_dma); + usb_buffer_free(dev->udev, dev->cfg.bt_datalen, + dev->bt_data, dev->bt_urb->transfer_dma); + usb_free_urb(dev->tp_urb); + usb_free_urb(dev->bt_urb); + kfree(dev); +} + +static struct usb_driver bcm5974_driver = { + .name = "bcm5974", + .probe = bcm5974_probe, + .disconnect = bcm5974_disconnect, + .suspend = bcm5974_suspend, + .resume = bcm5974_resume, + .reset_resume = bcm5974_resume, + .id_table = bcm5974_table, + .supports_autosuspend = 1, +}; + +static int __init bcm5974_init(void) +{ + return usb_register(&bcm5974_driver); +} + +static void __exit bcm5974_exit(void) +{ + usb_deregister(&bcm5974_driver); +} + +module_init(bcm5974_init); +module_exit(bcm5974_exit); + diff --git a/drivers/input/serio/i8042-x86ia64io.h b/drivers/input/serio/i8042-x86ia64io.h index fe732a574ec..3282b741e24 100644 --- a/drivers/input/serio/i8042-x86ia64io.h +++ b/drivers/input/serio/i8042-x86ia64io.h @@ -394,6 +394,13 @@ static struct dmi_system_id __initdata i8042_dmi_dritek_table[] = { DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 2490"), }, }, + { + .ident = "Acer TravelMate 4280", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Acer"), + DMI_MATCH(DMI_PRODUCT_NAME, "TravelMate 4280"), + }, + }, { } }; diff --git a/drivers/input/serio/xilinx_ps2.c b/drivers/input/serio/xilinx_ps2.c index 0ed044d5e68..765007899d9 100644 --- a/drivers/input/serio/xilinx_ps2.c +++ b/drivers/input/serio/xilinx_ps2.c @@ -269,8 +269,8 @@ static int xps2_setup(struct device *dev, struct resource *regs_res, * we have the PS2 in a good state */ out_be32(drvdata->base_address + XPS2_SRST_OFFSET, XPS2_SRST_RESET); - dev_info(dev, "Xilinx PS2 at 0x%08X mapped to 0x%08X, irq=%d\n", - drvdata->phys_addr, (u32)drvdata->base_address, drvdata->irq); + dev_info(dev, "Xilinx PS2 at 0x%08X mapped to 0x%p, irq=%d\n", + drvdata->phys_addr, drvdata->base_address, drvdata->irq); serio = &drvdata->serio; serio->id.type = SERIO_8042; diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index 6e60a97a234..25287e80e23 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -249,29 +249,26 @@ config TOUCHSCREEN_WM97XX config TOUCHSCREEN_WM9705 bool "WM9705 Touchscreen interface support" depends on TOUCHSCREEN_WM97XX + default y help - Say Y here if you have a Wolfson Microelectronics WM9705 - touchscreen controller connected to your system. - - If unsure, say N. + Say Y here to enable support for the Wolfson Microelectronics + WM9705 touchscreen controller. config TOUCHSCREEN_WM9712 bool "WM9712 Touchscreen interface support" depends on TOUCHSCREEN_WM97XX + default y help - Say Y here if you have a Wolfson Microelectronics WM9712 - touchscreen controller connected to your system. - - If unsure, say N. + Say Y here to enable support for the Wolfson Microelectronics + WM9712 touchscreen controller. config TOUCHSCREEN_WM9713 bool "WM9713 Touchscreen interface support" depends on TOUCHSCREEN_WM97XX + default y help - Say Y here if you have a Wolfson Microelectronics WM9713 touchscreen - controller connected to your system. - - If unsure, say N. + Say Y here to enable support for the Wolfson Microelectronics + WM9713 touchscreen controller. config TOUCHSCREEN_WM97XX_MAINSTONE tristate "WM97xx Mainstone accelerated touch" diff --git a/drivers/md/md.c b/drivers/md/md.c index c7aae66c6f9..8cfadc5bd2b 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -2393,6 +2393,8 @@ static void analyze_sbs(mddev_t * mddev) } +static void md_safemode_timeout(unsigned long data); + static ssize_t safe_delay_show(mddev_t *mddev, char *page) { @@ -2432,9 +2434,12 @@ safe_delay_store(mddev_t *mddev, const char *cbuf, size_t len) if (msec == 0) mddev->safemode_delay = 0; else { + unsigned long old_delay = mddev->safemode_delay; mddev->safemode_delay = (msec*HZ)/1000; if (mddev->safemode_delay == 0) mddev->safemode_delay = 1; + if (mddev->safemode_delay < old_delay) + md_safemode_timeout((unsigned long)mddev); } return len; } @@ -4634,6 +4639,11 @@ static int update_size(mddev_t *mddev, sector_t num_sectors) */ if (mddev->sync_thread) return -EBUSY; + if (mddev->bitmap) + /* Sorry, cannot grow a bitmap yet, just remove it, + * grow, and re-add. + */ + return -EBUSY; rdev_for_each(rdev, tmp, mddev) { sector_t avail; avail = rdev->size * 2; @@ -5993,7 +6003,7 @@ static int remove_and_add_spares(mddev_t *mddev) } } - if (mddev->degraded) { + if (mddev->degraded && ! mddev->ro) { rdev_for_each(rdev, rtmp, mddev) { if (rdev->raid_disk >= 0 && !test_bit(In_sync, &rdev->flags) && @@ -6067,6 +6077,8 @@ void md_check_recovery(mddev_t *mddev) flush_signals(current); } + if (mddev->ro && !test_bit(MD_RECOVERY_NEEDED, &mddev->recovery)) + return; if ( ! ( (mddev->flags && !mddev->external) || test_bit(MD_RECOVERY_NEEDED, &mddev->recovery) || @@ -6080,6 +6092,15 @@ void md_check_recovery(mddev_t *mddev) if (mddev_trylock(mddev)) { int spares = 0; + if (mddev->ro) { + /* Only thing we do on a ro array is remove + * failed devices. + */ + remove_and_add_spares(mddev); + clear_bit(MD_RECOVERY_NEEDED, &mddev->recovery); + goto unlock; + } + if (!mddev->external) { int did_change = 0; spin_lock_irq(&mddev->write_lock); @@ -6117,7 +6138,8 @@ void md_check_recovery(mddev_t *mddev) /* resync has finished, collect result */ md_unregister_thread(mddev->sync_thread); mddev->sync_thread = NULL; - if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery)) { + if (!test_bit(MD_RECOVERY_INTR, &mddev->recovery) && + !test_bit(MD_RECOVERY_REQUESTED, &mddev->recovery)) { /* success...*/ /* activate any spares */ if (mddev->pers->spare_active(mddev)) @@ -6169,6 +6191,7 @@ void md_check_recovery(mddev_t *mddev) } else if ((spares = remove_and_add_spares(mddev))) { clear_bit(MD_RECOVERY_SYNC, &mddev->recovery); clear_bit(MD_RECOVERY_CHECK, &mddev->recovery); + clear_bit(MD_RECOVERY_REQUESTED, &mddev->recovery); set_bit(MD_RECOVERY_RECOVER, &mddev->recovery); } else if (mddev->recovery_cp < MaxSector) { set_bit(MD_RECOVERY_SYNC, &mddev->recovery); @@ -6232,7 +6255,11 @@ static int md_notify_reboot(struct notifier_block *this, for_each_mddev(mddev, tmp) if (mddev_trylock(mddev)) { - do_md_stop (mddev, 1, 0); + /* Force a switch to readonly even array + * appears to still be in use. Hence + * the '100'. + */ + do_md_stop (mddev, 1, 100); mddev_unlock(mddev); } /* diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c index d41bebb6da0..e34cd0e6247 100644 --- a/drivers/md/raid10.c +++ b/drivers/md/raid10.c @@ -76,11 +76,13 @@ static void r10bio_pool_free(void *r10_bio, void *data) kfree(r10_bio); } +/* Maximum size of each resync request */ #define RESYNC_BLOCK_SIZE (64*1024) -//#define RESYNC_BLOCK_SIZE PAGE_SIZE -#define RESYNC_SECTORS (RESYNC_BLOCK_SIZE >> 9) #define RESYNC_PAGES ((RESYNC_BLOCK_SIZE + PAGE_SIZE-1) / PAGE_SIZE) -#define RESYNC_WINDOW (2048*1024) +/* amount of memory to reserve for resync requests */ +#define RESYNC_WINDOW (1024*1024) +/* maximum number of concurrent requests, memory permitting */ +#define RESYNC_DEPTH (32*1024*1024/RESYNC_BLOCK_SIZE) /* * When performing a resync, we need to read and compare, so @@ -690,7 +692,6 @@ static int flush_pending_writes(conf_t *conf) * there is no normal IO happeing. It must arrange to call * lower_barrier when the particular background IO completes. */ -#define RESYNC_DEPTH 32 static void raise_barrier(conf_t *conf, int force) { diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 40e93967565..224de022e7c 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -2568,10 +2568,10 @@ static bool handle_stripe5(struct stripe_head *sh) if (dev->written) s.written++; rdev = rcu_dereference(conf->disks[i].rdev); - if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) { + if (blocked_rdev == NULL && + rdev && unlikely(test_bit(Blocked, &rdev->flags))) { blocked_rdev = rdev; atomic_inc(&rdev->nr_pending); - break; } if (!rdev || !test_bit(In_sync, &rdev->flags)) { /* The ReadError flag will just be confusing now */ @@ -2588,8 +2588,14 @@ static bool handle_stripe5(struct stripe_head *sh) rcu_read_unlock(); if (unlikely(blocked_rdev)) { - set_bit(STRIPE_HANDLE, &sh->state); - goto unlock; + if (s.syncing || s.expanding || s.expanded || + s.to_write || s.written) { + set_bit(STRIPE_HANDLE, &sh->state); + goto unlock; + } + /* There is nothing for the blocked_rdev to block */ + rdev_dec_pending(blocked_rdev, conf->mddev); + blocked_rdev = NULL; } if (s.to_fill && !test_bit(STRIPE_BIOFILL_RUN, &sh->state)) { @@ -2832,10 +2838,10 @@ static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page) if (dev->written) s.written++; rdev = rcu_dereference(conf->disks[i].rdev); - if (rdev && unlikely(test_bit(Blocked, &rdev->flags))) { + if (blocked_rdev == NULL && + rdev && unlikely(test_bit(Blocked, &rdev->flags))) { blocked_rdev = rdev; atomic_inc(&rdev->nr_pending); - break; } if (!rdev || !test_bit(In_sync, &rdev->flags)) { /* The ReadError flag will just be confusing now */ @@ -2853,9 +2859,16 @@ static bool handle_stripe6(struct stripe_head *sh, struct page *tmp_page) rcu_read_unlock(); if (unlikely(blocked_rdev)) { - set_bit(STRIPE_HANDLE, &sh->state); - goto unlock; + if (s.syncing || s.expanding || s.expanded || + s.to_write || s.written) { + set_bit(STRIPE_HANDLE, &sh->state); + goto unlock; + } + /* There is nothing for the blocked_rdev to block */ + rdev_dec_pending(blocked_rdev, conf->mddev); + blocked_rdev = NULL; } + pr_debug("locked=%d uptodate=%d to_read=%d" " to_write=%d failed=%d failed_num=%d,%d\n", s.locked, s.uptodate, s.to_read, s.to_write, s.failed, @@ -4446,6 +4459,9 @@ static int raid5_check_reshape(mddev_t *mddev) return -EINVAL; /* Cannot shrink array or change level yet */ if (mddev->delta_disks == 0) return 0; /* nothing to do */ + if (mddev->bitmap) + /* Cannot grow a bitmap yet */ + return -EBUSY; /* Can only proceed if there are plenty of stripe_heads. * We need a minimum of one full stripe,, and for sensible progress diff --git a/drivers/misc/acer-wmi.c b/drivers/misc/acer-wmi.c index e7a3fe508df..b2d9878dc3f 100644 --- a/drivers/misc/acer-wmi.c +++ b/drivers/misc/acer-wmi.c @@ -803,11 +803,30 @@ static acpi_status get_u32(u32 *value, u32 cap) static acpi_status set_u32(u32 value, u32 cap) { + acpi_status status; + if (interface->capability & cap) { switch (interface->type) { case ACER_AMW0: return AMW0_set_u32(value, cap, interface); case ACER_AMW0_V2: + if (cap == ACER_CAP_MAILLED) + return AMW0_set_u32(value, cap, interface); + + /* + * On some models, some WMID methods don't toggle + * properly. For those cases, we want to run the AMW0 + * method afterwards to be certain we've really toggled + * the device state. + */ + if (cap == ACER_CAP_WIRELESS || + cap == ACER_CAP_BLUETOOTH) { + status = WMID_set_u32(value, cap, interface); + if (ACPI_FAILURE(status)) + return status; + + return AMW0_set_u32(value, cap, interface); + } case ACER_WMID: return WMID_set_u32(value, cap, interface); default: diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c index d3eb7903c34..6b9300779a4 100644 --- a/drivers/misc/thinkpad_acpi.c +++ b/drivers/misc/thinkpad_acpi.c @@ -3086,7 +3086,6 @@ static struct ibm_struct wan_driver_data = { .read = wan_read, .write = wan_write, .exit = wan_exit, - .flags.experimental = 1, }; /************************************************************************* diff --git a/drivers/mtd/nand/orion_nand.c b/drivers/mtd/nand/orion_nand.c index 64002488c6e..917cf8d3ae9 100644 --- a/drivers/mtd/nand/orion_nand.c +++ b/drivers/mtd/nand/orion_nand.c @@ -19,7 +19,7 @@ #include <asm/io.h> #include <asm/sizes.h> #include <mach/hardware.h> -#include <asm/plat-orion/orion_nand.h> +#include <plat/orion_nand.h> #ifdef CONFIG_MTD_CMDLINE_PARTS static const char *part_probes[] = { "cmdlinepart", NULL }; diff --git a/drivers/pcmcia/pxa2xx_palmtx.c b/drivers/pcmcia/pxa2xx_palmtx.c index a8771ffc61e..e07b5c51ec5 100644 --- a/drivers/pcmcia/pxa2xx_palmtx.c +++ b/drivers/pcmcia/pxa2xx_palmtx.c @@ -23,12 +23,57 @@ static int palmtx_pcmcia_hw_init(struct soc_pcmcia_socket *skt) { - skt->irq = IRQ_GPIO(GPIO_NR_PALMTX_PCMCIA_READY); + int ret; + + ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER1, "PCMCIA PWR1"); + if (ret) + goto err1; + ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER1, 0); + if (ret) + goto err2; + + ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_POWER2, "PCMCIA PWR2"); + if (ret) + goto err2; + ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_POWER2, 0); + if (ret) + goto err3; + + ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_RESET, "PCMCIA RST"); + if (ret) + goto err3; + ret = gpio_direction_output(GPIO_NR_PALMTX_PCMCIA_RESET, 1); + if (ret) + goto err4; + + ret = gpio_request(GPIO_NR_PALMTX_PCMCIA_READY, "PCMCIA RDY"); + if (ret) + goto err4; + ret = gpio_direction_input(GPIO_NR_PALMTX_PCMCIA_READY); + if (ret) + goto err5; + + skt->irq = gpio_to_irq(GPIO_NR_PALMTX_PCMCIA_READY); return 0; + +err5: + gpio_free(GPIO_NR_PALMTX_PCMCIA_READY); +err4: + gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET); +err3: + gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2); +err2: + gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1); +err1: + return ret; } static void palmtx_pcmcia_hw_shutdown(struct soc_pcmcia_socket *skt) { + gpio_free(GPIO_NR_PALMTX_PCMCIA_READY); + gpio_free(GPIO_NR_PALMTX_PCMCIA_RESET); + gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER2); + gpio_free(GPIO_NR_PALMTX_PCMCIA_POWER1); } static void palmtx_pcmcia_socket_state(struct soc_pcmcia_socket *skt, @@ -109,7 +154,7 @@ static void __exit palmtx_pcmcia_exit(void) platform_device_unregister(palmtx_pcmcia_device); } -fs_initcall(palmtx_pcmcia_init); +module_init(palmtx_pcmcia_init); module_exit(palmtx_pcmcia_exit); MODULE_AUTHOR("Marek Vasut <marek.vasut@gmail.com>"); diff --git a/drivers/pnp/pnpacpi/rsparser.c b/drivers/pnp/pnpacpi/rsparser.c index d7e9f2152df..95015cbfd33 100644 --- a/drivers/pnp/pnpacpi/rsparser.c +++ b/drivers/pnp/pnpacpi/rsparser.c @@ -405,8 +405,6 @@ static acpi_status pnpacpi_allocated_resource(struct acpi_resource *res, case ACPI_RESOURCE_TYPE_EXTENDED_IRQ: extended_irq = &res->data.extended_irq; - if (extended_irq->producer_consumer == ACPI_PRODUCER) - return AE_OK; if (extended_irq->interrupt_count == 0) pnp_add_irq_resource(dev, 0, IORESOURCE_DISABLED); diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 3b4a14e355c..77cb34270fc 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -449,6 +449,7 @@ config SERIAL_CLPS711X_CONSOLE config SERIAL_SAMSUNG tristate "Samsung SoC serial support" depends on ARM && PLAT_S3C24XX + select SERIAL_CORE help Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, providing /dev/ttySAC0, 1 and 2 (note, some machines may not diff --git a/drivers/spi/spi.c b/drivers/spi/spi.c index 964124b60db..75e86865234 100644 --- a/drivers/spi/spi.c +++ b/drivers/spi/spi.c @@ -226,10 +226,11 @@ EXPORT_SYMBOL_GPL(spi_alloc_device); * Companion function to spi_alloc_device. Devices allocated with * spi_alloc_device can be added onto the spi bus with this function. * - * Returns 0 on success; non-zero on failure + * Returns 0 on success; negative errno on failure */ int spi_add_device(struct spi_device *spi) { + static DEFINE_MUTEX(spi_add_lock); struct device *dev = spi->master->dev.parent; int status; @@ -246,26 +247,43 @@ int spi_add_device(struct spi_device *spi) "%s.%u", spi->master->dev.bus_id, spi->chip_select); - /* drivers may modify this initial i/o setup */ + + /* We need to make sure there's no other device with this + * chipselect **BEFORE** we call setup(), else we'll trash + * its configuration. Lock against concurrent add() calls. + */ + mutex_lock(&spi_add_lock); + + if (bus_find_device_by_name(&spi_bus_type, NULL, spi->dev.bus_id) + != NULL) { + dev_err(dev, "chipselect %d already in use\n", + spi->chip_select); + status = -EBUSY; + goto done; + } + + /* Drivers may modify this initial i/o setup, but will + * normally rely on the device being setup. Devices + * using SPI_CS_HIGH can't coexist well otherwise... + */ status = spi->master->setup(spi); if (status < 0) { dev_err(dev, "can't %s %s, status %d\n", "setup", spi->dev.bus_id, status); - return status; + goto done; } - /* driver core catches callers that misbehave by defining - * devices that already exist. - */ + /* Device may be bound to an active driver when this returns */ status = device_add(&spi->dev); - if (status < 0) { + if (status < 0) dev_err(dev, "can't %s %s, status %d\n", "add", spi->dev.bus_id, status); - return status; - } + else + dev_dbg(dev, "registered child %s\n", spi->dev.bus_id); - dev_dbg(dev, "registered child %s\n", spi->dev.bus_id); - return 0; +done: + mutex_unlock(&spi_add_lock); + return status; } EXPORT_SYMBOL_GPL(spi_add_device); diff --git a/drivers/usb/host/ehci-orion.c b/drivers/usb/host/ehci-orion.c index 5fbdc14e63b..5416cf96900 100644 --- a/drivers/usb/host/ehci-orion.c +++ b/drivers/usb/host/ehci-orion.c @@ -12,7 +12,7 @@ #include <linux/module.h> #include <linux/platform_device.h> #include <linux/mbus.h> -#include <asm/plat-orion/ehci-orion.h> +#include <plat/ehci-orion.h> #define rdl(off) __raw_readl(hcd->regs + (off)) #define wrl(off, val) __raw_writel((val), hcd->regs + (off)) diff --git a/drivers/video/fsl-diu-fb.c b/drivers/video/fsl-diu-fb.c index bd320a2bfb7..fb51197d1c9 100644 --- a/drivers/video/fsl-diu-fb.c +++ b/drivers/video/fsl-diu-fb.c @@ -479,6 +479,10 @@ static void adjust_aoi_size_position(struct fb_var_screeninfo *var, base_plane_width = machine_data->fsl_diu_info[0]->var.xres; base_plane_height = machine_data->fsl_diu_info[0]->var.yres; + if (mfbi->x_aoi_d < 0) + mfbi->x_aoi_d = 0; + if (mfbi->y_aoi_d < 0) + mfbi->y_aoi_d = 0; switch (index) { case 0: if (mfbi->x_aoi_d != 0) @@ -778,6 +782,22 @@ static void unmap_video_memory(struct fb_info *info) } /* + * Using the fb_var_screeninfo in fb_info we set the aoi of this + * particular framebuffer. It is a light version of fsl_diu_set_par. + */ +static int fsl_diu_set_aoi(struct fb_info *info) +{ + struct fb_var_screeninfo *var = &info->var; + struct mfb_info *mfbi = info->par; + struct diu_ad *ad = mfbi->ad; + + /* AOI should not be greater than display size */ + ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset); + ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d); + return 0; +} + +/* * Using the fb_var_screeninfo in fb_info we set the resolution of this * particular framebuffer. This function alters the fb_fix_screeninfo stored * in fb_info. It does not alter var in fb_info since we are using that @@ -817,11 +837,11 @@ static int fsl_diu_set_par(struct fb_info *info) diu_ops.get_pixel_format(var->bits_per_pixel, machine_data->monitor_port); ad->addr = cpu_to_le32(info->fix.smem_start); - ad->src_size_g_alpha = cpu_to_le32((var->yres << 12) | - var->xres) | mfbi->g_alpha; - /* fix me. AOI should not be greater than display size */ + ad->src_size_g_alpha = cpu_to_le32((var->yres_virtual << 12) | + var->xres_virtual) | mfbi->g_alpha; + /* AOI should not be greater than display size */ ad->aoi_size = cpu_to_le32((var->yres << 16) | var->xres); - ad->offset_xyi = 0; + ad->offset_xyi = cpu_to_le32((var->yoffset << 16) | var->xoffset); ad->offset_xyd = cpu_to_le32((mfbi->y_aoi_d << 16) | mfbi->x_aoi_d); /* Disable chroma keying function */ @@ -921,6 +941,8 @@ static int fsl_diu_pan_display(struct fb_var_screeninfo *var, else info->var.vmode &= ~FB_VMODE_YWRAP; + fsl_diu_set_aoi(info); + return 0; } @@ -989,7 +1011,7 @@ static int fsl_diu_ioctl(struct fb_info *info, unsigned int cmd, pr_debug("set AOI display offset of index %d to (%d,%d)\n", mfbi->index, aoi_d.x_aoi_d, aoi_d.y_aoi_d); fsl_diu_check_var(&info->var, info); - fsl_diu_set_par(info); + fsl_diu_set_aoi(info); break; case MFB_GET_AOID: aoi_d.x_aoi_d = mfbi->x_aoi_d; diff --git a/drivers/video/pxafb.c b/drivers/video/pxafb.c index e7aa7ae8fca..97204497d9f 100644 --- a/drivers/video/pxafb.c +++ b/drivers/video/pxafb.c @@ -1031,7 +1031,9 @@ static void pxafb_setup_gpio(struct pxafb_info *fbi) pxa_gpio_mode(GPIO74_LCD_FCLK_MD); pxa_gpio_mode(GPIO75_LCD_LCLK_MD); pxa_gpio_mode(GPIO76_LCD_PCLK_MD); - pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD); + + if ((lccr0 & LCCR0_PAS) == 0) + pxa_gpio_mode(GPIO77_LCD_ACBIAS_MD); } static void pxafb_enable_controller(struct pxafb_info *fbi) @@ -1400,6 +1402,8 @@ static void pxafb_decode_mach_info(struct pxafb_info *fbi, if (lcd_conn == LCD_MONO_STN_8BPP) fbi->lccr0 |= LCCR0_DPD; + fbi->lccr0 |= (lcd_conn & LCD_ALTERNATE_MAPPING) ? LCCR0_LDDALT : 0; + fbi->lccr3 = LCCR3_Acb((inf->lcd_conn >> 10) & 0xff); fbi->lccr3 |= (lcd_conn & LCD_BIAS_ACTIVE_LOW) ? LCCR3_OEP : 0; fbi->lccr3 |= (lcd_conn & LCD_PCLK_EDGE_FALL) ? LCCR3_PCP : 0; @@ -1673,53 +1677,63 @@ MODULE_PARM_DESC(options, "LCD parameters (see Documentation/fb/pxafb.txt)"); #define pxafb_setup_options() (0) #endif -static int __devinit pxafb_probe(struct platform_device *dev) -{ - struct pxafb_info *fbi; - struct pxafb_mach_info *inf; - struct resource *r; - int irq, ret; - - dev_dbg(&dev->dev, "pxafb_probe\n"); - - inf = dev->dev.platform_data; - ret = -ENOMEM; - fbi = NULL; - if (!inf) - goto failed; - - ret = pxafb_parse_options(&dev->dev, g_options); - if (ret < 0) - goto failed; - #ifdef DEBUG_VAR - /* Check for various illegal bit-combinations. Currently only - * a warning is given. */ +/* Check for various illegal bit-combinations. Currently only + * a warning is given. */ +static void __devinit pxafb_check_options(struct device *dev, + struct pxafb_mach_info *inf) +{ + if (inf->lcd_conn) + return; if (inf->lccr0 & LCCR0_INVALID_CONFIG_MASK) - dev_warn(&dev->dev, "machine LCCR0 setting contains " + dev_warn(dev, "machine LCCR0 setting contains " "illegal bits: %08x\n", inf->lccr0 & LCCR0_INVALID_CONFIG_MASK); if (inf->lccr3 & LCCR3_INVALID_CONFIG_MASK) - dev_warn(&dev->dev, "machine LCCR3 setting contains " + dev_warn(dev, "machine LCCR3 setting contains " "illegal bits: %08x\n", inf->lccr3 & LCCR3_INVALID_CONFIG_MASK); if (inf->lccr0 & LCCR0_DPD && ((inf->lccr0 & LCCR0_PAS) != LCCR0_Pas || (inf->lccr0 & LCCR0_SDS) != LCCR0_Sngl || (inf->lccr0 & LCCR0_CMS) != LCCR0_Mono)) - dev_warn(&dev->dev, "Double Pixel Data (DPD) mode is " + dev_warn(dev, "Double Pixel Data (DPD) mode is " "only valid in passive mono" " single panel mode\n"); if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Act && (inf->lccr0 & LCCR0_SDS) == LCCR0_Dual) - dev_warn(&dev->dev, "Dual panel only valid in passive mode\n"); + dev_warn(dev, "Dual panel only valid in passive mode\n"); if ((inf->lccr0 & LCCR0_PAS) == LCCR0_Pas && (inf->modes->upper_margin || inf->modes->lower_margin)) - dev_warn(&dev->dev, "Upper and lower margins must be 0 in " + dev_warn(dev, "Upper and lower margins must be 0 in " "passive mode\n"); +} +#else +#define pxafb_check_options(...) do {} while (0) #endif +static int __devinit pxafb_probe(struct platform_device *dev) +{ + struct pxafb_info *fbi; + struct pxafb_mach_info *inf; + struct resource *r; + int irq, ret; + + dev_dbg(&dev->dev, "pxafb_probe\n"); + + inf = dev->dev.platform_data; + ret = -ENOMEM; + fbi = NULL; + if (!inf) + goto failed; + + ret = pxafb_parse_options(&dev->dev, g_options); + if (ret < 0) + goto failed; + + pxafb_check_options(&dev->dev, inf); + dev_dbg(&dev->dev, "got a %dx%dx%d LCD\n", inf->modes->xres, inf->modes->yres, diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index 3da2b90d2fe..22715e3be5e 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -157,8 +157,6 @@ static void s3c2410wdt_start(void) writel(wdt_count, wdt_base + S3C2410_WTCNT); writel(wtcon, wdt_base + S3C2410_WTCON); spin_unlock(&wdt_lock); - - return 0; } static int s3c2410wdt_set_heartbeat(int timeout) diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c index e8da4ee761b..25ecbd5b040 100644 --- a/fs/cifs/cifsfs.c +++ b/fs/cifs/cifsfs.c @@ -175,6 +175,8 @@ out_no_root: if (inode) iput(inode); + cifs_umount(sb, cifs_sb); + out_mount_failed: if (cifs_sb) { #ifdef CONFIG_CIFS_DFS_UPCALL diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c index 28a22092d45..848286861c3 100644 --- a/fs/cifs/inode.c +++ b/fs/cifs/inode.c @@ -649,6 +649,7 @@ struct inode *cifs_iget(struct super_block *sb, unsigned long ino) inode->i_fop = &simple_dir_operations; inode->i_uid = cifs_sb->mnt_uid; inode->i_gid = cifs_sb->mnt_gid; + } else if (rc) { _FreeXid(xid); iget_failed(inode); return ERR_PTR(rc); diff --git a/fs/inode.c b/fs/inode.c index b6726f64453..0487ddba139 100644 --- a/fs/inode.c +++ b/fs/inode.c @@ -166,6 +166,7 @@ static struct inode *alloc_inode(struct super_block *sb) mapping_set_gfp_mask(mapping, GFP_HIGHUSER_PAGECACHE); mapping->assoc_mapping = NULL; mapping->backing_dev_info = &default_backing_dev_info; + mapping->writeback_index = 0; /* * If the block_device provides a backing_dev_info for client diff --git a/fs/omfs/bitmap.c b/fs/omfs/bitmap.c index 697663b01ba..e1c0ec0ae98 100644 --- a/fs/omfs/bitmap.c +++ b/fs/omfs/bitmap.c @@ -92,7 +92,7 @@ int omfs_allocate_block(struct super_block *sb, u64 block) struct buffer_head *bh; struct omfs_sb_info *sbi = OMFS_SB(sb); int bits_per_entry = 8 * sb->s_blocksize; - int map, bit; + unsigned int map, bit; int ret = 0; u64 tmp; @@ -176,7 +176,8 @@ int omfs_clear_range(struct super_block *sb, u64 block, int count) struct omfs_sb_info *sbi = OMFS_SB(sb); int bits_per_entry = 8 * sb->s_blocksize; u64 tmp; - int map, bit, ret; + unsigned int map, bit; + int ret; tmp = block; bit = do_div(tmp, bits_per_entry); diff --git a/fs/omfs/file.c b/fs/omfs/file.c index 7e2499053e4..834b2331f6b 100644 --- a/fs/omfs/file.c +++ b/fs/omfs/file.c @@ -26,6 +26,13 @@ static int omfs_sync_file(struct file *file, struct dentry *dentry, return err ? -EIO : 0; } +static u32 omfs_max_extents(struct omfs_sb_info *sbi, int offset) +{ + return (sbi->s_sys_blocksize - offset - + sizeof(struct omfs_extent)) / + sizeof(struct omfs_extent_entry) + 1; +} + void omfs_make_empty_table(struct buffer_head *bh, int offset) { struct omfs_extent *oe = (struct omfs_extent *) &bh->b_data[offset]; @@ -45,6 +52,7 @@ int omfs_shrink_inode(struct inode *inode) struct buffer_head *bh; u64 next, last; u32 extent_count; + u32 max_extents; int ret; /* traverse extent table, freeing each entry that is greater @@ -62,15 +70,18 @@ int omfs_shrink_inode(struct inode *inode) goto out; oe = (struct omfs_extent *)(&bh->b_data[OMFS_EXTENT_START]); + max_extents = omfs_max_extents(sbi, OMFS_EXTENT_START); for (;;) { - if (omfs_is_bad(sbi, (struct omfs_header *) bh->b_data, next)) { - brelse(bh); - goto out; - } + if (omfs_is_bad(sbi, (struct omfs_header *) bh->b_data, next)) + goto out_brelse; extent_count = be32_to_cpu(oe->e_extent_count); + + if (extent_count > max_extents) + goto out_brelse; + last = next; next = be64_to_cpu(oe->e_next); entry = &oe->e_entry; @@ -98,10 +109,14 @@ int omfs_shrink_inode(struct inode *inode) if (!bh) goto out; oe = (struct omfs_extent *) (&bh->b_data[OMFS_EXTENT_CONT]); + max_extents = omfs_max_extents(sbi, OMFS_EXTENT_CONT); } ret = 0; out: return ret; +out_brelse: + brelse(bh); + return ret; } static void omfs_truncate(struct inode *inode) @@ -154,9 +169,7 @@ static int omfs_grow_extent(struct inode *inode, struct omfs_extent *oe, goto out; } } - max_count = (sbi->s_sys_blocksize - OMFS_EXTENT_START - - sizeof(struct omfs_extent)) / - sizeof(struct omfs_extent_entry) + 1; + max_count = omfs_max_extents(sbi, OMFS_EXTENT_START); /* TODO: add a continuation block here */ if (be32_to_cpu(oe->e_extent_count) > max_count-1) @@ -225,6 +238,7 @@ static int omfs_get_block(struct inode *inode, sector_t block, sector_t next, offset; int ret; u64 new_block; + u32 max_extents; int extent_count; struct omfs_extent *oe; struct omfs_extent_entry *entry; @@ -238,6 +252,7 @@ static int omfs_get_block(struct inode *inode, sector_t block, goto out; oe = (struct omfs_extent *)(&bh->b_data[OMFS_EXTENT_START]); + max_extents = omfs_max_extents(sbi, OMFS_EXTENT_START); next = inode->i_ino; for (;;) { @@ -249,6 +264,9 @@ static int omfs_get_block(struct inode *inode, sector_t block, next = be64_to_cpu(oe->e_next); entry = &oe->e_entry; + if (extent_count > max_extents) + goto out_brelse; + offset = find_block(inode, entry, block, extent_count, &remain); if (offset > 0) { ret = 0; @@ -266,6 +284,7 @@ static int omfs_get_block(struct inode *inode, sector_t block, if (!bh) goto out; oe = (struct omfs_extent *) (&bh->b_data[OMFS_EXTENT_CONT]); + max_extents = omfs_max_extents(sbi, OMFS_EXTENT_CONT); } if (create) { ret = omfs_grow_extent(inode, oe, &new_block); diff --git a/fs/omfs/inode.c b/fs/omfs/inode.c index a95fe5984f4..d29047b1b9b 100644 --- a/fs/omfs/inode.c +++ b/fs/omfs/inode.c @@ -232,8 +232,7 @@ struct inode *omfs_iget(struct super_block *sb, ino_t ino) inode->i_mode = S_IFDIR | (S_IRWXUGO & ~sbi->s_dmask); inode->i_op = &omfs_dir_inops; inode->i_fop = &omfs_dir_operations; - inode->i_size = be32_to_cpu(oi->i_head.h_body_size) + - sizeof(struct omfs_header); + inode->i_size = sbi->s_sys_blocksize; inc_nlink(inode); break; case OMFS_FILE: diff --git a/fs/ubifs/budget.c b/fs/ubifs/budget.c index d81fb9ed2b8..15409815747 100644 --- a/fs/ubifs/budget.c +++ b/fs/ubifs/budget.c @@ -263,8 +263,8 @@ int ubifs_calc_min_idx_lebs(struct ubifs_info *c) idx_size = c->old_idx_sz + c->budg_idx_growth + c->budg_uncommitted_idx; - /* And make sure we have twice the index size of space reserved */ - idx_size <<= 1; + /* And make sure we have thrice the index size of space reserved */ + idx_size = idx_size + (idx_size << 1); /* * We do not maintain 'old_idx_size' as 'old_idx_lebs'/'old_idx_bytes' @@ -388,11 +388,11 @@ static int can_use_rp(struct ubifs_info *c) * This function makes sure UBIFS has enough free eraseblocks for index growth * and data. * - * When budgeting index space, UBIFS reserves twice as more LEBs as the index + * When budgeting index space, UBIFS reserves thrice as many LEBs as the index * would take if it was consolidated and written to the flash. This guarantees * that the "in-the-gaps" commit method always succeeds and UBIFS will always * be able to commit dirty index. So this function basically adds amount of - * budgeted index space to the size of the current index, multiplies this by 2, + * budgeted index space to the size of the current index, multiplies this by 3, * and makes sure this does not exceed the amount of free eraseblocks. * * Notes about @c->min_idx_lebs and @c->lst.idx_lebs variables: @@ -543,8 +543,16 @@ int ubifs_budget_space(struct ubifs_info *c, struct ubifs_budget_req *req) int err, idx_growth, data_growth, dd_growth; struct retries_info ri; + ubifs_assert(req->new_page <= 1); + ubifs_assert(req->dirtied_page <= 1); + ubifs_assert(req->new_dent <= 1); + ubifs_assert(req->mod_dent <= 1); + ubifs_assert(req->new_ino <= 1); + ubifs_assert(req->new_ino_d <= UBIFS_MAX_INO_DATA); ubifs_assert(req->dirtied_ino <= 4); ubifs_assert(req->dirtied_ino_d <= UBIFS_MAX_INO_DATA * 4); + ubifs_assert(!(req->new_ino_d & 7)); + ubifs_assert(!(req->dirtied_ino_d & 7)); data_growth = calc_data_growth(c, req); dd_growth = calc_dd_growth(c, req); @@ -618,8 +626,16 @@ again: */ void ubifs_release_budget(struct ubifs_info *c, struct ubifs_budget_req *req) { + ubifs_assert(req->new_page <= 1); + ubifs_assert(req->dirtied_page <= 1); + ubifs_assert(req->new_dent <= 1); + ubifs_assert(req->mod_dent <= 1); + ubifs_assert(req->new_ino <= 1); + ubifs_assert(req->new_ino_d <= UBIFS_MAX_INO_DATA); ubifs_assert(req->dirtied_ino <= 4); ubifs_assert(req->dirtied_ino_d <= UBIFS_MAX_INO_DATA * 4); + ubifs_assert(!(req->new_ino_d & 7)); + ubifs_assert(!(req->dirtied_ino_d & 7)); if (!req->recalculate) { ubifs_assert(req->idx_growth >= 0); ubifs_assert(req->data_growth >= 0); @@ -647,7 +663,11 @@ void ubifs_release_budget(struct ubifs_info *c, struct ubifs_budget_req *req) ubifs_assert(c->budg_idx_growth >= 0); ubifs_assert(c->budg_data_growth >= 0); + ubifs_assert(c->budg_dd_growth >= 0); ubifs_assert(c->min_idx_lebs < c->main_lebs); + ubifs_assert(!(c->budg_idx_growth & 7)); + ubifs_assert(!(c->budg_data_growth & 7)); + ubifs_assert(!(c->budg_dd_growth & 7)); spin_unlock(&c->space_lock); } @@ -686,9 +706,10 @@ void ubifs_convert_page_budget(struct ubifs_info *c) void ubifs_release_dirty_inode_budget(struct ubifs_info *c, struct ubifs_inode *ui) { - struct ubifs_budget_req req = {.dd_growth = c->inode_budget, - .dirtied_ino_d = ui->data_len}; + struct ubifs_budget_req req; + memset(&req, 0, sizeof(struct ubifs_budget_req)); + req.dd_growth = c->inode_budget + ALIGN(ui->data_len, 8); ubifs_release_budget(c, &req); } diff --git a/fs/ubifs/commit.c b/fs/ubifs/commit.c index 3b516316c9b..0a6aa2cc78f 100644 --- a/fs/ubifs/commit.c +++ b/fs/ubifs/commit.c @@ -74,6 +74,7 @@ static int do_commit(struct ubifs_info *c) goto out_up; } + c->cmt_no += 1; err = ubifs_gc_start_commit(c); if (err) goto out_up; @@ -115,7 +116,7 @@ static int do_commit(struct ubifs_info *c) goto out; mutex_lock(&c->mst_mutex); - c->mst_node->cmt_no = cpu_to_le64(++c->cmt_no); + c->mst_node->cmt_no = cpu_to_le64(c->cmt_no); c->mst_node->log_lnum = cpu_to_le32(new_ltail_lnum); c->mst_node->root_lnum = cpu_to_le32(zroot.lnum); c->mst_node->root_offs = cpu_to_le32(zroot.offs); diff --git a/fs/ubifs/debug.c b/fs/ubifs/debug.c index 4e3aaeba4ec..b9cb7747375 100644 --- a/fs/ubifs/debug.c +++ b/fs/ubifs/debug.c @@ -568,8 +568,8 @@ void dbg_dump_budget_req(const struct ubifs_budget_req *req) void dbg_dump_lstats(const struct ubifs_lp_stats *lst) { spin_lock(&dbg_lock); - printk(KERN_DEBUG "Lprops statistics: empty_lebs %d, idx_lebs %d\n", - lst->empty_lebs, lst->idx_lebs); + printk(KERN_DEBUG "(pid %d) Lprops statistics: empty_lebs %d, " + "idx_lebs %d\n", current->pid, lst->empty_lebs, lst->idx_lebs); printk(KERN_DEBUG "\ttaken_empty_lebs %d, total_free %lld, " "total_dirty %lld\n", lst->taken_empty_lebs, lst->total_free, lst->total_dirty); @@ -587,8 +587,8 @@ void dbg_dump_budg(struct ubifs_info *c) struct ubifs_gced_idx_leb *idx_gc; spin_lock(&dbg_lock); - printk(KERN_DEBUG "Budgeting info: budg_data_growth %lld, " - "budg_dd_growth %lld, budg_idx_growth %lld\n", + printk(KERN_DEBUG "(pid %d) Budgeting info: budg_data_growth %lld, " + "budg_dd_growth %lld, budg_idx_growth %lld\n", current->pid, c->budg_data_growth, c->budg_dd_growth, c->budg_idx_growth); printk(KERN_DEBUG "\tdata budget sum %lld, total budget sum %lld, " "freeable_cnt %d\n", c->budg_data_growth + c->budg_dd_growth, @@ -634,7 +634,7 @@ void dbg_dump_lprops(struct ubifs_info *c) struct ubifs_lprops lp; struct ubifs_lp_stats lst; - printk(KERN_DEBUG "Dumping LEB properties\n"); + printk(KERN_DEBUG "(pid %d) Dumping LEB properties\n", current->pid); ubifs_get_lp_stats(c, &lst); dbg_dump_lstats(&lst); @@ -655,7 +655,7 @@ void dbg_dump_leb(const struct ubifs_info *c, int lnum) if (dbg_failure_mode) return; - printk(KERN_DEBUG "Dumping LEB %d\n", lnum); + printk(KERN_DEBUG "(pid %d) Dumping LEB %d\n", current->pid, lnum); sleb = ubifs_scan(c, lnum, 0, c->dbg_buf); if (IS_ERR(sleb)) { @@ -720,8 +720,8 @@ void dbg_dump_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, int cat) { int i; - printk(KERN_DEBUG "Dumping heap cat %d (%d elements)\n", - cat, heap->cnt); + printk(KERN_DEBUG "(pid %d) Dumping heap cat %d (%d elements)\n", + current->pid, cat, heap->cnt); for (i = 0; i < heap->cnt; i++) { struct ubifs_lprops *lprops = heap->arr[i]; @@ -736,7 +736,7 @@ void dbg_dump_pnode(struct ubifs_info *c, struct ubifs_pnode *pnode, { int i; - printk(KERN_DEBUG "Dumping pnode:\n"); + printk(KERN_DEBUG "(pid %d) Dumping pnode:\n", current->pid); printk(KERN_DEBUG "\taddress %zx parent %zx cnext %zx\n", (size_t)pnode, (size_t)parent, (size_t)pnode->cnext); printk(KERN_DEBUG "\tflags %lu iip %d level %d num %d\n", @@ -755,7 +755,7 @@ void dbg_dump_tnc(struct ubifs_info *c) int level; printk(KERN_DEBUG "\n"); - printk(KERN_DEBUG "Dumping the TNC tree\n"); + printk(KERN_DEBUG "(pid %d) Dumping the TNC tree\n", current->pid); znode = ubifs_tnc_levelorder_next(c->zroot.znode, NULL); level = znode->level; printk(KERN_DEBUG "== Level %d ==\n", level); @@ -2208,16 +2208,17 @@ int dbg_leb_read(struct ubi_volume_desc *desc, int lnum, char *buf, int offset, int dbg_leb_write(struct ubi_volume_desc *desc, int lnum, const void *buf, int offset, int len, int dtype) { - int err; + int err, failing; if (in_failure_mode(desc)) return -EIO; - if (do_fail(desc, lnum, 1)) + failing = do_fail(desc, lnum, 1); + if (failing) cut_data(buf, len); err = ubi_leb_write(desc, lnum, buf, offset, len, dtype); if (err) return err; - if (in_failure_mode(desc)) + if (failing) return -EIO; return 0; } diff --git a/fs/ubifs/debug.h b/fs/ubifs/debug.h index 3c4f1e93c9e..50315fc5718 100644 --- a/fs/ubifs/debug.h +++ b/fs/ubifs/debug.h @@ -27,7 +27,7 @@ #define UBIFS_DBG(op) op -#define ubifs_assert(expr) do { \ +#define ubifs_assert(expr) do { \ if (unlikely(!(expr))) { \ printk(KERN_CRIT "UBIFS assert failed in %s at %u (pid %d)\n", \ __func__, __LINE__, current->pid); \ @@ -73,50 +73,50 @@ const char *dbg_key_str1(const struct ubifs_info *c, const union ubifs_key *key); /* - * DBGKEY macros require dbg_lock to be held, which it is in the dbg message + * DBGKEY macros require @dbg_lock to be held, which it is in the dbg message * macros. */ #define DBGKEY(key) dbg_key_str0(c, (key)) #define DBGKEY1(key) dbg_key_str1(c, (key)) /* General messages */ -#define dbg_gen(fmt, ...) dbg_do_msg(UBIFS_MSG_GEN, fmt, ##__VA_ARGS__) +#define dbg_gen(fmt, ...) dbg_do_msg(UBIFS_MSG_GEN, fmt, ##__VA_ARGS__) /* Additional journal messages */ -#define dbg_jnl(fmt, ...) dbg_do_msg(UBIFS_MSG_JNL, fmt, ##__VA_ARGS__) +#define dbg_jnl(fmt, ...) dbg_do_msg(UBIFS_MSG_JNL, fmt, ##__VA_ARGS__) /* Additional TNC messages */ -#define dbg_tnc(fmt, ...) dbg_do_msg(UBIFS_MSG_TNC, fmt, ##__VA_ARGS__) +#define dbg_tnc(fmt, ...) dbg_do_msg(UBIFS_MSG_TNC, fmt, ##__VA_ARGS__) /* Additional lprops messages */ -#define dbg_lp(fmt, ...) dbg_do_msg(UBIFS_MSG_LP, fmt, ##__VA_ARGS__) +#define dbg_lp(fmt, ...) dbg_do_msg(UBIFS_MSG_LP, fmt, ##__VA_ARGS__) /* Additional LEB find messages */ -#define dbg_find(fmt, ...) dbg_do_msg(UBIFS_MSG_FIND, fmt, ##__VA_ARGS__) +#define dbg_find(fmt, ...) dbg_do_msg(UBIFS_MSG_FIND, fmt, ##__VA_ARGS__) /* Additional mount messages */ -#define dbg_mnt(fmt, ...) dbg_do_msg(UBIFS_MSG_MNT, fmt, ##__VA_ARGS__) +#define dbg_mnt(fmt, ...) dbg_do_msg(UBIFS_MSG_MNT, fmt, ##__VA_ARGS__) /* Additional I/O messages */ -#define dbg_io(fmt, ...) dbg_do_msg(UBIFS_MSG_IO, fmt, ##__VA_ARGS__) +#define dbg_io(fmt, ...) dbg_do_msg(UBIFS_MSG_IO, fmt, ##__VA_ARGS__) /* Additional commit messages */ -#define dbg_cmt(fmt, ...) dbg_do_msg(UBIFS_MSG_CMT, fmt, ##__VA_ARGS__) +#define dbg_cmt(fmt, ...) dbg_do_msg(UBIFS_MSG_CMT, fmt, ##__VA_ARGS__) /* Additional budgeting messages */ -#define dbg_budg(fmt, ...) dbg_do_msg(UBIFS_MSG_BUDG, fmt, ##__VA_ARGS__) +#define dbg_budg(fmt, ...) dbg_do_msg(UBIFS_MSG_BUDG, fmt, ##__VA_ARGS__) /* Additional log messages */ -#define dbg_log(fmt, ...) dbg_do_msg(UBIFS_MSG_LOG, fmt, ##__VA_ARGS__) +#define dbg_log(fmt, ...) dbg_do_msg(UBIFS_MSG_LOG, fmt, ##__VA_ARGS__) /* Additional gc messages */ -#define dbg_gc(fmt, ...) dbg_do_msg(UBIFS_MSG_GC, fmt, ##__VA_ARGS__) +#define dbg_gc(fmt, ...) dbg_do_msg(UBIFS_MSG_GC, fmt, ##__VA_ARGS__) /* Additional scan messages */ -#define dbg_scan(fmt, ...) dbg_do_msg(UBIFS_MSG_SCAN, fmt, ##__VA_ARGS__) +#define dbg_scan(fmt, ...) dbg_do_msg(UBIFS_MSG_SCAN, fmt, ##__VA_ARGS__) /* Additional recovery messages */ -#define dbg_rcvry(fmt, ...) dbg_do_msg(UBIFS_MSG_RCVRY, fmt, ##__VA_ARGS__) +#define dbg_rcvry(fmt, ...) dbg_do_msg(UBIFS_MSG_RCVRY, fmt, ##__VA_ARGS__) /* * Debugging message type flags (must match msg_type_names in debug.c). @@ -239,34 +239,23 @@ typedef int (*dbg_leaf_callback)(struct ubifs_info *c, struct ubifs_zbranch *zbr, void *priv); typedef int (*dbg_znode_callback)(struct ubifs_info *c, struct ubifs_znode *znode, void *priv); - int dbg_walk_index(struct ubifs_info *c, dbg_leaf_callback leaf_cb, dbg_znode_callback znode_cb, void *priv); /* Checking functions */ int dbg_check_lprops(struct ubifs_info *c); - int dbg_old_index_check_init(struct ubifs_info *c, struct ubifs_zbranch *zroot); int dbg_check_old_index(struct ubifs_info *c, struct ubifs_zbranch *zroot); - int dbg_check_cats(struct ubifs_info *c); - int dbg_check_ltab(struct ubifs_info *c); - int dbg_check_synced_i_size(struct inode *inode); - int dbg_check_dir_size(struct ubifs_info *c, const struct inode *dir); - int dbg_check_tnc(struct ubifs_info *c, int extra); - int dbg_check_idx_size(struct ubifs_info *c, long long idx_size); - int dbg_check_filesystem(struct ubifs_info *c); - void dbg_check_heap(struct ubifs_info *c, struct ubifs_lpt_heap *heap, int cat, int add_pos); - int dbg_check_lprops(struct ubifs_info *c); int dbg_check_lpt_nodes(struct ubifs_info *c, struct ubifs_cnode *cnode, int row, int col); @@ -329,71 +318,77 @@ static inline int dbg_change(struct ubi_volume_desc *desc, int lnum, #else /* !CONFIG_UBIFS_FS_DEBUG */ #define UBIFS_DBG(op) -#define ubifs_assert(expr) ({}) -#define ubifs_assert_cmt_locked(c) + +/* Use "if (0)" to make compiler check arguments even if debugging is off */ +#define ubifs_assert(expr) do { \ + if (0 && (expr)) \ + printk(KERN_CRIT "UBIFS assert failed in %s at %u (pid %d)\n", \ + __func__, __LINE__, current->pid); \ +} while (0) + +#define dbg_err(fmt, ...) do { \ + if (0) \ + ubifs_err(fmt, ##__VA_ARGS__); \ +} while (0) + +#define dbg_msg(fmt, ...) do { \ + if (0) \ + printk(KERN_DEBUG "UBIFS DBG (pid %d): %s: " fmt "\n", \ + current->pid, __func__, ##__VA_ARGS__); \ +} while (0) + #define dbg_dump_stack() -#define dbg_err(fmt, ...) ({}) -#define dbg_msg(fmt, ...) ({}) -#define dbg_key(c, key, fmt, ...) ({}) - -#define dbg_gen(fmt, ...) ({}) -#define dbg_jnl(fmt, ...) ({}) -#define dbg_tnc(fmt, ...) ({}) -#define dbg_lp(fmt, ...) ({}) -#define dbg_find(fmt, ...) ({}) -#define dbg_mnt(fmt, ...) ({}) -#define dbg_io(fmt, ...) ({}) -#define dbg_cmt(fmt, ...) ({}) -#define dbg_budg(fmt, ...) ({}) -#define dbg_log(fmt, ...) ({}) -#define dbg_gc(fmt, ...) ({}) -#define dbg_scan(fmt, ...) ({}) -#define dbg_rcvry(fmt, ...) ({}) - -#define dbg_ntype(type) "" -#define dbg_cstate(cmt_state) "" -#define dbg_get_key_dump(c, key) ({}) -#define dbg_dump_inode(c, inode) ({}) -#define dbg_dump_node(c, node) ({}) -#define dbg_dump_budget_req(req) ({}) -#define dbg_dump_lstats(lst) ({}) -#define dbg_dump_budg(c) ({}) -#define dbg_dump_lprop(c, lp) ({}) -#define dbg_dump_lprops(c) ({}) -#define dbg_dump_leb(c, lnum) ({}) -#define dbg_dump_znode(c, znode) ({}) -#define dbg_dump_heap(c, heap, cat) ({}) -#define dbg_dump_pnode(c, pnode, parent, iip) ({}) -#define dbg_dump_tnc(c) ({}) -#define dbg_dump_index(c) ({}) +#define ubifs_assert_cmt_locked(c) -#define dbg_walk_index(c, leaf_cb, znode_cb, priv) 0 +#define dbg_gen(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__) +#define dbg_jnl(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__) +#define dbg_tnc(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__) +#define dbg_lp(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__) +#define dbg_find(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__) +#define dbg_mnt(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__) +#define dbg_io(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__) +#define dbg_cmt(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__) +#define dbg_budg(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__) +#define dbg_log(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__) +#define dbg_gc(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__) +#define dbg_scan(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__) +#define dbg_rcvry(fmt, ...) dbg_msg(fmt, ##__VA_ARGS__) + +#define DBGKEY(key) ((char *)(key)) +#define DBGKEY1(key) ((char *)(key)) + +#define dbg_ntype(type) "" +#define dbg_cstate(cmt_state) "" +#define dbg_get_key_dump(c, key) ({}) +#define dbg_dump_inode(c, inode) ({}) +#define dbg_dump_node(c, node) ({}) +#define dbg_dump_budget_req(req) ({}) +#define dbg_dump_lstats(lst) ({}) +#define dbg_dump_budg(c) ({}) +#define dbg_dump_lprop(c, lp) ({}) +#define dbg_dump_lprops(c) ({}) +#define dbg_dump_leb(c, lnum) ({}) +#define dbg_dump_znode(c, znode) ({}) +#define dbg_dump_heap(c, heap, cat) ({}) +#define dbg_dump_pnode(c, pnode, parent, iip) ({}) +#define dbg_dump_tnc(c) ({}) +#define dbg_dump_index(c) ({}) +#define dbg_walk_index(c, leaf_cb, znode_cb, priv) 0 #define dbg_old_index_check_init(c, zroot) 0 #define dbg_check_old_index(c, zroot) 0 - #define dbg_check_cats(c) 0 - #define dbg_check_ltab(c) 0 - #define dbg_check_synced_i_size(inode) 0 - #define dbg_check_dir_size(c, dir) 0 - #define dbg_check_tnc(c, x) 0 - #define dbg_check_idx_size(c, idx_size) 0 - #define dbg_check_filesystem(c) 0 - #define dbg_check_heap(c, heap, cat, add_pos) ({}) - #define dbg_check_lprops(c) 0 #define dbg_check_lpt_nodes(c, cnode, row, col) 0 - #define dbg_force_in_the_gaps_enabled 0 #define dbg_force_in_the_gaps() 0 - #define dbg_failure_mode 0 #define dbg_failure_mode_registration(c) ({}) #define dbg_failure_mode_deregistration(c) ({}) diff --git a/fs/ubifs/dir.c b/fs/ubifs/dir.c index e90374be7d3..5c96f1fb701 100644 --- a/fs/ubifs/dir.c +++ b/fs/ubifs/dir.c @@ -165,7 +165,6 @@ struct inode *ubifs_new_inode(struct ubifs_info *c, const struct inode *dir, } inode->i_ino = ++c->highest_inum; - inode->i_generation = ++c->vfs_gen; /* * The creation sequence number remains with this inode for its * lifetime. All nodes for this inode have a greater sequence number, @@ -220,15 +219,7 @@ static struct dentry *ubifs_lookup(struct inode *dir, struct dentry *dentry, err = ubifs_tnc_lookup_nm(c, &key, dent, &dentry->d_name); if (err) { - /* - * Do not hash the direntry if parent 'i_nlink' is zero, because - * this has side-effects - '->delete_inode()' call will not be - * called for the parent orphan inode, because 'd_count' of its - * direntry will stay 1 (it'll be negative direntry I guess) - * and prevent 'iput_final()' until the dentry is destroyed due - * to unmount or memory pressure. - */ - if (err == -ENOENT && dir->i_nlink != 0) { + if (err == -ENOENT) { dbg_gen("not found"); goto done; } @@ -525,7 +516,7 @@ static int ubifs_link(struct dentry *old_dentry, struct inode *dir, struct ubifs_inode *dir_ui = ubifs_inode(dir); int err, sz_change = CALC_DENT_SIZE(dentry->d_name.len); struct ubifs_budget_req req = { .new_dent = 1, .dirtied_ino = 2, - .dirtied_ino_d = ui->data_len }; + .dirtied_ino_d = ALIGN(ui->data_len, 8) }; /* * Budget request settings: new direntry, changing the target inode, @@ -727,8 +718,7 @@ static int ubifs_mkdir(struct inode *dir, struct dentry *dentry, int mode) struct ubifs_inode *dir_ui = ubifs_inode(dir); struct ubifs_info *c = dir->i_sb->s_fs_info; int err, sz_change = CALC_DENT_SIZE(dentry->d_name.len); - struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1, - .dirtied_ino_d = 1 }; + struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1 }; /* * Budget request settings: new inode, new direntry and changing parent @@ -789,7 +779,8 @@ static int ubifs_mknod(struct inode *dir, struct dentry *dentry, int sz_change = CALC_DENT_SIZE(dentry->d_name.len); int err, devlen = 0; struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1, - .new_ino_d = devlen, .dirtied_ino = 1 }; + .new_ino_d = ALIGN(devlen, 8), + .dirtied_ino = 1 }; /* * Budget request settings: new inode, new direntry and changing parent @@ -863,7 +854,8 @@ static int ubifs_symlink(struct inode *dir, struct dentry *dentry, int err, len = strlen(symname); int sz_change = CALC_DENT_SIZE(dentry->d_name.len); struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1, - .new_ino_d = len, .dirtied_ino = 1 }; + .new_ino_d = ALIGN(len, 8), + .dirtied_ino = 1 }; /* * Budget request settings: new inode, new direntry and changing parent @@ -1012,7 +1004,7 @@ static int ubifs_rename(struct inode *old_dir, struct dentry *old_dentry, struct ubifs_budget_req req = { .new_dent = 1, .mod_dent = 1, .dirtied_ino = 3 }; struct ubifs_budget_req ino_req = { .dirtied_ino = 1, - .dirtied_ino_d = old_inode_ui->data_len }; + .dirtied_ino_d = ALIGN(old_inode_ui->data_len, 8) }; struct timespec time; /* diff --git a/fs/ubifs/file.c b/fs/ubifs/file.c index 8565e586e53..4071d1cae29 100644 --- a/fs/ubifs/file.c +++ b/fs/ubifs/file.c @@ -890,7 +890,7 @@ static int do_setattr(struct ubifs_info *c, struct inode *inode, loff_t new_size = attr->ia_size; struct ubifs_inode *ui = ubifs_inode(inode); struct ubifs_budget_req req = { .dirtied_ino = 1, - .dirtied_ino_d = ui->data_len }; + .dirtied_ino_d = ALIGN(ui->data_len, 8) }; err = ubifs_budget_space(c, &req); if (err) @@ -941,7 +941,8 @@ int ubifs_setattr(struct dentry *dentry, struct iattr *attr) struct inode *inode = dentry->d_inode; struct ubifs_info *c = inode->i_sb->s_fs_info; - dbg_gen("ino %lu, ia_valid %#x", inode->i_ino, attr->ia_valid); + dbg_gen("ino %lu, mode %#x, ia_valid %#x", + inode->i_ino, inode->i_mode, attr->ia_valid); err = inode_change_ok(inode, attr); if (err) return err; @@ -1051,7 +1052,7 @@ static int update_mctime(struct ubifs_info *c, struct inode *inode) if (mctime_update_needed(inode, &now)) { int err, release; struct ubifs_budget_req req = { .dirtied_ino = 1, - .dirtied_ino_d = ui->data_len }; + .dirtied_ino_d = ALIGN(ui->data_len, 8) }; err = ubifs_budget_space(c, &req); if (err) @@ -1270,6 +1271,7 @@ struct file_operations ubifs_file_operations = { .fsync = ubifs_fsync, .unlocked_ioctl = ubifs_ioctl, .splice_read = generic_file_splice_read, + .splice_write = generic_file_splice_write, #ifdef CONFIG_COMPAT .compat_ioctl = ubifs_compat_ioctl, #endif diff --git a/fs/ubifs/find.c b/fs/ubifs/find.c index 10394c54836..adee7b5ddea 100644 --- a/fs/ubifs/find.c +++ b/fs/ubifs/find.c @@ -290,9 +290,14 @@ int ubifs_find_dirty_leb(struct ubifs_info *c, struct ubifs_lprops *ret_lp, idx_lp = idx_heap->arr[0]; sum = idx_lp->free + idx_lp->dirty; /* - * Since we reserve twice as more space for the index than it + * Since we reserve thrice as much space for the index than it * actually takes, it does not make sense to pick indexing LEBs - * with less than half LEB of dirty space. + * with less than, say, half LEB of dirty space. May be half is + * not the optimal boundary - this should be tested and + * checked. This boundary should determine how much we use + * in-the-gaps to consolidate the index comparing to how much + * we use garbage collector to consolidate it. The "half" + * criteria just feels to be fine. */ if (sum < min_space || sum < c->half_leb_size) idx_lp = NULL; diff --git a/fs/ubifs/io.c b/fs/ubifs/io.c index 3374f91b670..054363f2b20 100644 --- a/fs/ubifs/io.c +++ b/fs/ubifs/io.c @@ -54,6 +54,20 @@ #include "ubifs.h" /** + * ubifs_ro_mode - switch UBIFS to read read-only mode. + * @c: UBIFS file-system description object + * @err: error code which is the reason of switching to R/O mode + */ +void ubifs_ro_mode(struct ubifs_info *c, int err) +{ + if (!c->ro_media) { + c->ro_media = 1; + ubifs_warn("switched to read-only mode, error %d", err); + dbg_dump_stack(); + } +} + +/** * ubifs_check_node - check node. * @c: UBIFS file-system description object * @buf: node to check diff --git a/fs/ubifs/journal.c b/fs/ubifs/journal.c index 283155abe5f..22993f867d1 100644 --- a/fs/ubifs/journal.c +++ b/fs/ubifs/journal.c @@ -447,13 +447,11 @@ static int get_dent_type(int mode) * @ino: buffer in which to pack inode node * @inode: inode to pack * @last: indicates the last node of the group - * @last_reference: non-zero if this is a deletion inode */ static void pack_inode(struct ubifs_info *c, struct ubifs_ino_node *ino, - const struct inode *inode, int last, - int last_reference) + const struct inode *inode, int last) { - int data_len = 0; + int data_len = 0, last_reference = !inode->i_nlink; struct ubifs_inode *ui = ubifs_inode(inode); ino->ch.node_type = UBIFS_INO_NODE; @@ -596,9 +594,9 @@ int ubifs_jnl_update(struct ubifs_info *c, const struct inode *dir, ubifs_prep_grp_node(c, dent, dlen, 0); ino = (void *)dent + aligned_dlen; - pack_inode(c, ino, inode, 0, last_reference); + pack_inode(c, ino, inode, 0); ino = (void *)ino + aligned_ilen; - pack_inode(c, ino, dir, 1, 0); + pack_inode(c, ino, dir, 1); if (last_reference) { err = ubifs_add_orphan(c, inode->i_ino); @@ -606,6 +604,7 @@ int ubifs_jnl_update(struct ubifs_info *c, const struct inode *dir, release_head(c, BASEHD); goto out_finish; } + ui->del_cmtno = c->cmt_no; } err = write_head(c, BASEHD, dent, len, &lnum, &dent_offs, sync); @@ -750,30 +749,25 @@ out_free: * ubifs_jnl_write_inode - flush inode to the journal. * @c: UBIFS file-system description object * @inode: inode to flush - * @deletion: inode has been deleted * * This function writes inode @inode to the journal. If the inode is * synchronous, it also synchronizes the write-buffer. Returns zero in case of * success and a negative error code in case of failure. */ -int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode, - int deletion) +int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode) { - int err, len, lnum, offs, sync = 0; + int err, lnum, offs; struct ubifs_ino_node *ino; struct ubifs_inode *ui = ubifs_inode(inode); + int sync = 0, len = UBIFS_INO_NODE_SZ, last_reference = !inode->i_nlink; - dbg_jnl("ino %lu%s", inode->i_ino, - deletion ? " (last reference)" : ""); - if (deletion) - ubifs_assert(inode->i_nlink == 0); + dbg_jnl("ino %lu, nlink %u", inode->i_ino, inode->i_nlink); - len = UBIFS_INO_NODE_SZ; /* * If the inode is being deleted, do not write the attached data. No * need to synchronize the write-buffer either. */ - if (!deletion) { + if (!last_reference) { len += ui->data_len; sync = IS_SYNC(inode); } @@ -786,7 +780,7 @@ int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode, if (err) goto out_free; - pack_inode(c, ino, inode, 1, deletion); + pack_inode(c, ino, inode, 1); err = write_head(c, BASEHD, ino, len, &lnum, &offs, sync); if (err) goto out_release; @@ -795,7 +789,7 @@ int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode, inode->i_ino); release_head(c, BASEHD); - if (deletion) { + if (last_reference) { err = ubifs_tnc_remove_ino(c, inode->i_ino); if (err) goto out_ro; @@ -828,6 +822,65 @@ out_free: } /** + * ubifs_jnl_delete_inode - delete an inode. + * @c: UBIFS file-system description object + * @inode: inode to delete + * + * This function deletes inode @inode which includes removing it from orphans, + * deleting it from TNC and, in some cases, writing a deletion inode to the + * journal. + * + * When regular file inodes are unlinked or a directory inode is removed, the + * 'ubifs_jnl_update()' function writes a corresponding deletion inode and + * direntry to the media, and adds the inode to orphans. After this, when the + * last reference to this inode has been dropped, this function is called. In + * general, it has to write one more deletion inode to the media, because if + * a commit happened between 'ubifs_jnl_update()' and + * 'ubifs_jnl_delete_inode()', the deletion inode is not in the journal + * anymore, and in fact it might not be on the flash anymore, because it might + * have been garbage-collected already. And for optimization reasons UBIFS does + * not read the orphan area if it has been unmounted cleanly, so it would have + * no indication in the journal that there is a deleted inode which has to be + * removed from TNC. + * + * However, if there was no commit between 'ubifs_jnl_update()' and + * 'ubifs_jnl_delete_inode()', then there is no need to write the deletion + * inode to the media for the second time. And this is quite a typical case. + * + * This function returns zero in case of success and a negative error code in + * case of failure. + */ +int ubifs_jnl_delete_inode(struct ubifs_info *c, const struct inode *inode) +{ + int err; + struct ubifs_inode *ui = ubifs_inode(inode); + + ubifs_assert(inode->i_nlink == 0); + + if (ui->del_cmtno != c->cmt_no) + /* A commit happened for sure */ + return ubifs_jnl_write_inode(c, inode); + + down_read(&c->commit_sem); + /* + * Check commit number again, because the first test has been done + * without @c->commit_sem, so a commit might have happened. + */ + if (ui->del_cmtno != c->cmt_no) { + up_read(&c->commit_sem); + return ubifs_jnl_write_inode(c, inode); + } + + err = ubifs_tnc_remove_ino(c, inode->i_ino); + if (err) + ubifs_ro_mode(c, err); + else + ubifs_delete_orphan(c, inode->i_ino); + up_read(&c->commit_sem); + return err; +} + +/** * ubifs_jnl_rename - rename a directory entry. * @c: UBIFS file-system description object * @old_dir: parent inode of directory entry to rename @@ -917,16 +970,16 @@ int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir, p = (void *)dent2 + aligned_dlen2; if (new_inode) { - pack_inode(c, p, new_inode, 0, last_reference); + pack_inode(c, p, new_inode, 0); p += ALIGN(ilen, 8); } if (!move) - pack_inode(c, p, old_dir, 1, 0); + pack_inode(c, p, old_dir, 1); else { - pack_inode(c, p, old_dir, 0, 0); + pack_inode(c, p, old_dir, 0); p += ALIGN(plen, 8); - pack_inode(c, p, new_dir, 1, 0); + pack_inode(c, p, new_dir, 1); } if (last_reference) { @@ -935,6 +988,7 @@ int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir, release_head(c, BASEHD); goto out_finish; } + new_ui->del_cmtno = c->cmt_no; } err = write_head(c, BASEHD, dent, len, &lnum, &offs, sync); @@ -1131,7 +1185,7 @@ int ubifs_jnl_truncate(struct ubifs_info *c, const struct inode *inode, if (err) goto out_free; - pack_inode(c, ino, inode, 0, 0); + pack_inode(c, ino, inode, 0); ubifs_prep_grp_node(c, trun, UBIFS_TRUN_NODE_SZ, dlen ? 0 : 1); if (dlen) ubifs_prep_grp_node(c, dn, dlen, 1); @@ -1251,9 +1305,9 @@ int ubifs_jnl_delete_xattr(struct ubifs_info *c, const struct inode *host, ubifs_prep_grp_node(c, xent, xlen, 0); ino = (void *)xent + aligned_xlen; - pack_inode(c, ino, inode, 0, 1); + pack_inode(c, ino, inode, 0); ino = (void *)ino + UBIFS_INO_NODE_SZ; - pack_inode(c, ino, host, 1, 0); + pack_inode(c, ino, host, 1); err = write_head(c, BASEHD, xent, len, &lnum, &xent_offs, sync); if (!sync && !err) @@ -1320,7 +1374,7 @@ int ubifs_jnl_change_xattr(struct ubifs_info *c, const struct inode *inode, const struct inode *host) { int err, len1, len2, aligned_len, aligned_len1, lnum, offs; - struct ubifs_inode *host_ui = ubifs_inode(inode); + struct ubifs_inode *host_ui = ubifs_inode(host); struct ubifs_ino_node *ino; union ubifs_key key; int sync = IS_DIRSYNC(host); @@ -1344,8 +1398,8 @@ int ubifs_jnl_change_xattr(struct ubifs_info *c, const struct inode *inode, if (err) goto out_free; - pack_inode(c, ino, host, 0, 0); - pack_inode(c, (void *)ino + aligned_len1, inode, 1, 0); + pack_inode(c, ino, host, 0); + pack_inode(c, (void *)ino + aligned_len1, inode, 1); err = write_head(c, BASEHD, ino, aligned_len, &lnum, &offs, 0); if (!sync && !err) { diff --git a/fs/ubifs/log.c b/fs/ubifs/log.c index 36857b9ed59..3e0aa736755 100644 --- a/fs/ubifs/log.c +++ b/fs/ubifs/log.c @@ -317,6 +317,8 @@ int ubifs_add_bud_to_log(struct ubifs_info *c, int jhead, int lnum, int offs) return 0; out_unlock: + if (err != -EAGAIN) + ubifs_ro_mode(c, err); mutex_unlock(&c->log_mutex); kfree(ref); kfree(bud); @@ -410,7 +412,7 @@ int ubifs_log_start_commit(struct ubifs_info *c, int *ltail_lnum) return -ENOMEM; cs->ch.node_type = UBIFS_CS_NODE; - cs->cmt_no = cpu_to_le64(c->cmt_no + 1); + cs->cmt_no = cpu_to_le64(c->cmt_no); ubifs_prepare_node(c, cs, UBIFS_CS_NODE_SZ, 0); /* diff --git a/fs/ubifs/misc.h b/fs/ubifs/misc.h index 4beccfc256d..87dabf9fe74 100644 --- a/fs/ubifs/misc.h +++ b/fs/ubifs/misc.h @@ -80,20 +80,6 @@ static inline struct ubifs_inode *ubifs_inode(const struct inode *inode) } /** - * ubifs_ro_mode - switch UBIFS to read read-only mode. - * @c: UBIFS file-system description object - * @err: error code which is the reason of switching to R/O mode - */ -static inline void ubifs_ro_mode(struct ubifs_info *c, int err) -{ - if (!c->ro_media) { - c->ro_media = 1; - ubifs_warn("switched to read-only mode, error %d", err); - dbg_dump_stack(); - } -} - -/** * ubifs_compr_present - check if compressor was compiled in. * @compr_type: compressor type to check * @@ -322,7 +308,7 @@ static inline long long ubifs_reported_space(const struct ubifs_info *c, { int divisor, factor; - divisor = UBIFS_MAX_DATA_NODE_SZ + (c->max_idx_node_sz << 1); + divisor = UBIFS_MAX_DATA_NODE_SZ + (c->max_idx_node_sz * 3); factor = UBIFS_MAX_DATA_NODE_SZ - UBIFS_DATA_NODE_SZ; do_div(free, divisor); diff --git a/fs/ubifs/orphan.c b/fs/ubifs/orphan.c index 3afeb9242c6..02d3462f4d3 100644 --- a/fs/ubifs/orphan.c +++ b/fs/ubifs/orphan.c @@ -310,10 +310,10 @@ static int write_orph_node(struct ubifs_info *c, int atomic) c->cmt_orphans -= cnt; spin_unlock(&c->orphan_lock); if (c->cmt_orphans) - orph->cmt_no = cpu_to_le64(c->cmt_no + 1); + orph->cmt_no = cpu_to_le64(c->cmt_no); else /* Mark the last node of the commit */ - orph->cmt_no = cpu_to_le64((c->cmt_no + 1) | (1ULL << 63)); + orph->cmt_no = cpu_to_le64((c->cmt_no) | (1ULL << 63)); ubifs_assert(c->ohead_offs + len <= c->leb_size); ubifs_assert(c->ohead_lnum >= c->orph_first); ubifs_assert(c->ohead_lnum <= c->orph_last); diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c index ca1e2d4e03c..f71e6b8822c 100644 --- a/fs/ubifs/super.c +++ b/fs/ubifs/super.c @@ -30,7 +30,6 @@ #include <linux/slab.h> #include <linux/module.h> #include <linux/ctype.h> -#include <linux/random.h> #include <linux/kthread.h> #include <linux/parser.h> #include <linux/seq_file.h> @@ -149,7 +148,7 @@ struct inode *ubifs_iget(struct super_block *sb, unsigned long inum) if (err) goto out_invalid; - /* Disable readahead */ + /* Disable read-ahead */ inode->i_mapping->backing_dev_info = &c->bdi; switch (inode->i_mode & S_IFMT) { @@ -278,7 +277,7 @@ static void ubifs_destroy_inode(struct inode *inode) */ static int ubifs_write_inode(struct inode *inode, int wait) { - int err; + int err = 0; struct ubifs_info *c = inode->i_sb->s_fs_info; struct ubifs_inode *ui = ubifs_inode(inode); @@ -299,10 +298,18 @@ static int ubifs_write_inode(struct inode *inode, int wait) return 0; } - dbg_gen("inode %lu", inode->i_ino); - err = ubifs_jnl_write_inode(c, inode, 0); - if (err) - ubifs_err("can't write inode %lu, error %d", inode->i_ino, err); + /* + * As an optimization, do not write orphan inodes to the media just + * because this is not needed. + */ + dbg_gen("inode %lu, mode %#x, nlink %u", + inode->i_ino, (int)inode->i_mode, inode->i_nlink); + if (inode->i_nlink) { + err = ubifs_jnl_write_inode(c, inode); + if (err) + ubifs_err("can't write inode %lu, error %d", + inode->i_ino, err); + } ui->dirty = 0; mutex_unlock(&ui->ui_mutex); @@ -314,8 +321,9 @@ static void ubifs_delete_inode(struct inode *inode) { int err; struct ubifs_info *c = inode->i_sb->s_fs_info; + struct ubifs_inode *ui = ubifs_inode(inode); - if (ubifs_inode(inode)->xattr) + if (ui->xattr) /* * Extended attribute inode deletions are fully handled in * 'ubifs_removexattr()'. These inodes are special and have @@ -323,7 +331,7 @@ static void ubifs_delete_inode(struct inode *inode) */ goto out; - dbg_gen("inode %lu", inode->i_ino); + dbg_gen("inode %lu, mode %#x", inode->i_ino, (int)inode->i_mode); ubifs_assert(!atomic_read(&inode->i_count)); ubifs_assert(inode->i_nlink == 0); @@ -331,15 +339,19 @@ static void ubifs_delete_inode(struct inode *inode) if (is_bad_inode(inode)) goto out; - ubifs_inode(inode)->ui_size = inode->i_size = 0; - err = ubifs_jnl_write_inode(c, inode, 1); + ui->ui_size = inode->i_size = 0; + err = ubifs_jnl_delete_inode(c, inode); if (err) /* * Worst case we have a lost orphan inode wasting space, so a - * simple error message is ok here. + * simple error message is OK here. */ - ubifs_err("can't write inode %lu, error %d", inode->i_ino, err); + ubifs_err("can't delete inode %lu, error %d", + inode->i_ino, err); + out: + if (ui->dirty) + ubifs_release_dirty_inode_budget(c, ui); clear_inode(inode); } @@ -1122,8 +1134,8 @@ static int mount_ubifs(struct ubifs_info *c) if (err) goto out_infos; - ubifs_msg("mounted UBI device %d, volume %d", c->vi.ubi_num, - c->vi.vol_id); + ubifs_msg("mounted UBI device %d, volume %d, name \"%s\"", + c->vi.ubi_num, c->vi.vol_id, c->vi.name); if (mounted_read_only) ubifs_msg("mounted read-only"); x = (long long)c->main_lebs * c->leb_size; @@ -1469,6 +1481,7 @@ static void ubifs_put_super(struct super_block *sb) */ ubifs_assert(atomic_long_read(&c->dirty_pg_cnt) == 0); ubifs_assert(c->budg_idx_growth == 0); + ubifs_assert(c->budg_dd_growth == 0); ubifs_assert(c->budg_data_growth == 0); /* @@ -1657,7 +1670,6 @@ static int ubifs_fill_super(struct super_block *sb, void *data, int silent) INIT_LIST_HEAD(&c->orph_new); c->highest_inum = UBIFS_FIRST_INO; - get_random_bytes(&c->vfs_gen, sizeof(int)); c->lhead_lnum = c->ltail_lnum = UBIFS_LOG_LNUM; ubi_get_volume_info(ubi, &c->vi); @@ -1671,10 +1683,10 @@ static int ubifs_fill_super(struct super_block *sb, void *data, int silent) } /* - * UBIFS provids 'backing_dev_info' in order to disable readahead. For + * UBIFS provides 'backing_dev_info' in order to disable read-ahead. For * UBIFS, I/O is not deferred, it is done immediately in readpage, * which means the user would have to wait not just for their own I/O - * but the readahead I/O as well i.e. completely pointless. + * but the read-ahead I/O as well i.e. completely pointless. * * Read-ahead will be disabled because @c->bdi.ra_pages is 0. */ diff --git a/fs/ubifs/tnc_commit.c b/fs/ubifs/tnc_commit.c index 8117e65ba2e..8ac76b1c2d5 100644 --- a/fs/ubifs/tnc_commit.c +++ b/fs/ubifs/tnc_commit.c @@ -372,26 +372,25 @@ static int layout_in_gaps(struct ubifs_info *c, int cnt) written = layout_leb_in_gaps(c, p); if (written < 0) { err = written; - if (err == -ENOSPC) { - if (!dbg_force_in_the_gaps_enabled) { - /* - * Do not print scary warnings if the - * debugging option which forces - * in-the-gaps is enabled. - */ - ubifs_err("out of space"); - spin_lock(&c->space_lock); - dbg_dump_budg(c); - spin_unlock(&c->space_lock); - dbg_dump_lprops(c); - } - /* Try to commit anyway */ - err = 0; - break; + if (err != -ENOSPC) { + kfree(c->gap_lebs); + c->gap_lebs = NULL; + return err; } - kfree(c->gap_lebs); - c->gap_lebs = NULL; - return err; + if (!dbg_force_in_the_gaps_enabled) { + /* + * Do not print scary warnings if the debugging + * option which forces in-the-gaps is enabled. + */ + ubifs_err("out of space"); + spin_lock(&c->space_lock); + dbg_dump_budg(c); + spin_unlock(&c->space_lock); + dbg_dump_lprops(c); + } + /* Try to commit anyway */ + err = 0; + break; } p++; cnt -= written; diff --git a/fs/ubifs/ubifs-media.h b/fs/ubifs/ubifs-media.h index 0cc7da9bed4..bd2121f3426 100644 --- a/fs/ubifs/ubifs-media.h +++ b/fs/ubifs/ubifs-media.h @@ -228,10 +228,10 @@ enum { /* Minimum number of orphan area logical eraseblocks */ #define UBIFS_MIN_ORPH_LEBS 1 /* - * Minimum number of main area logical eraseblocks (buds, 2 for the index, 1 + * Minimum number of main area logical eraseblocks (buds, 3 for the index, 1 * for GC, 1 for deletions, and at least 1 for committed data). */ -#define UBIFS_MIN_MAIN_LEBS (UBIFS_MIN_BUD_LEBS + 5) +#define UBIFS_MIN_MAIN_LEBS (UBIFS_MIN_BUD_LEBS + 6) /* Minimum number of logical eraseblocks */ #define UBIFS_MIN_LEB_CNT (UBIFS_SB_LEBS + UBIFS_MST_LEBS + \ diff --git a/fs/ubifs/ubifs.h b/fs/ubifs/ubifs.h index e4f89f27182..d7f706f7a30 100644 --- a/fs/ubifs/ubifs.h +++ b/fs/ubifs/ubifs.h @@ -20,8 +20,6 @@ * Adrian Hunter */ -/* Implementation version 0.7 */ - #ifndef __UBIFS_H__ #define __UBIFS_H__ @@ -322,6 +320,8 @@ struct ubifs_gced_idx_leb { * struct ubifs_inode - UBIFS in-memory inode description. * @vfs_inode: VFS inode description object * @creat_sqnum: sequence number at time of creation + * @del_cmtno: commit number corresponding to the time the inode was deleted, + * protected by @c->commit_sem; * @xattr_size: summarized size of all extended attributes in bytes * @xattr_cnt: count of extended attributes this inode has * @xattr_names: sum of lengths of all extended attribute names belonging to @@ -373,6 +373,7 @@ struct ubifs_gced_idx_leb { struct ubifs_inode { struct inode vfs_inode; unsigned long long creat_sqnum; + unsigned long long del_cmtno; unsigned int xattr_size; unsigned int xattr_cnt; unsigned int xattr_names; @@ -779,7 +780,7 @@ struct ubifs_compressor { /** * struct ubifs_budget_req - budget requirements of an operation. * - * @fast: non-zero if the budgeting should try to aquire budget quickly and + * @fast: non-zero if the budgeting should try to acquire budget quickly and * should not try to call write-back * @recalculate: non-zero if @idx_growth, @data_growth, and @dd_growth fields * have to be re-calculated @@ -805,21 +806,31 @@ struct ubifs_compressor { * An inode may contain 4KiB of data at max., thus the widths of @new_ino_d * is 13 bits, and @dirtied_ino_d - 15, because up to 4 inodes may be made * dirty by the re-name operation. + * + * Note, UBIFS aligns node lengths to 8-bytes boundary, so the requester has to + * make sure the amount of inode data which contribute to @new_ino_d and + * @dirtied_ino_d fields are aligned. */ struct ubifs_budget_req { unsigned int fast:1; unsigned int recalculate:1; +#ifndef UBIFS_DEBUG unsigned int new_page:1; unsigned int dirtied_page:1; unsigned int new_dent:1; unsigned int mod_dent:1; unsigned int new_ino:1; unsigned int new_ino_d:13; -#ifndef UBIFS_DEBUG unsigned int dirtied_ino:4; unsigned int dirtied_ino_d:15; #else /* Not bit-fields to check for overflows */ + unsigned int new_page; + unsigned int dirtied_page; + unsigned int new_dent; + unsigned int mod_dent; + unsigned int new_ino; + unsigned int new_ino_d; unsigned int dirtied_ino; unsigned int dirtied_ino_d; #endif @@ -860,13 +871,13 @@ struct ubifs_mount_opts { * struct ubifs_info - UBIFS file-system description data structure * (per-superblock). * @vfs_sb: VFS @struct super_block object - * @bdi: backing device info object to make VFS happy and disable readahead + * @bdi: backing device info object to make VFS happy and disable read-ahead * * @highest_inum: highest used inode number - * @vfs_gen: VFS inode generation counter * @max_sqnum: current global sequence number - * @cmt_no: commit number (last successfully completed commit) - * @cnt_lock: protects @highest_inum, @vfs_gen, and @max_sqnum counters + * @cmt_no: commit number of the last successfully completed commit, protected + * by @commit_sem + * @cnt_lock: protects @highest_inum and @max_sqnum counters * @fmt_version: UBIFS on-flash format version * @uuid: UUID from super block * @@ -1103,7 +1114,6 @@ struct ubifs_info { struct backing_dev_info bdi; ino_t highest_inum; - unsigned int vfs_gen; unsigned long long max_sqnum; unsigned long long cmt_no; spinlock_t cnt_lock; @@ -1346,6 +1356,7 @@ extern struct backing_dev_info ubifs_backing_dev_info; extern struct ubifs_compressor *ubifs_compressors[UBIFS_COMPR_TYPES_CNT]; /* io.c */ +void ubifs_ro_mode(struct ubifs_info *c, int err); int ubifs_wbuf_write_nolock(struct ubifs_wbuf *wbuf, void *buf, int len); int ubifs_wbuf_seek_nolock(struct ubifs_wbuf *wbuf, int lnum, int offs, int dtype); @@ -1399,8 +1410,8 @@ int ubifs_jnl_update(struct ubifs_info *c, const struct inode *dir, int deletion, int xent); int ubifs_jnl_write_data(struct ubifs_info *c, const struct inode *inode, const union ubifs_key *key, const void *buf, int len); -int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode, - int last_reference); +int ubifs_jnl_write_inode(struct ubifs_info *c, const struct inode *inode); +int ubifs_jnl_delete_inode(struct ubifs_info *c, const struct inode *inode); int ubifs_jnl_rename(struct ubifs_info *c, const struct inode *old_dir, const struct dentry *old_dentry, const struct inode *new_dir, diff --git a/fs/ubifs/xattr.c b/fs/ubifs/xattr.c index 1388a078e1a..649bec78b64 100644 --- a/fs/ubifs/xattr.c +++ b/fs/ubifs/xattr.c @@ -61,7 +61,7 @@ /* * Limit the number of extended attributes per inode so that the total size - * (xattr_size) is guaranteeded to fit in an 'unsigned int'. + * (@xattr_size) is guaranteeded to fit in an 'unsigned int'. */ #define MAX_XATTRS_PER_INODE 65535 @@ -103,14 +103,14 @@ static int create_xattr(struct ubifs_info *c, struct inode *host, struct inode *inode; struct ubifs_inode *ui, *host_ui = ubifs_inode(host); struct ubifs_budget_req req = { .new_ino = 1, .new_dent = 1, - .new_ino_d = size, .dirtied_ino = 1, - .dirtied_ino_d = host_ui->data_len}; + .new_ino_d = ALIGN(size, 8), .dirtied_ino = 1, + .dirtied_ino_d = ALIGN(host_ui->data_len, 8) }; if (host_ui->xattr_cnt >= MAX_XATTRS_PER_INODE) return -ENOSPC; /* * Linux limits the maximum size of the extended attribute names list - * to %XATTR_LIST_MAX. This means we should not allow creating more* + * to %XATTR_LIST_MAX. This means we should not allow creating more * extended attributes if the name list becomes larger. This limitation * is artificial for UBIFS, though. */ @@ -128,7 +128,6 @@ static int create_xattr(struct ubifs_info *c, struct inode *host, goto out_budg; } - mutex_lock(&host_ui->ui_mutex); /* Re-define all operations to be "nothing" */ inode->i_mapping->a_ops = &none_address_operations; inode->i_op = &none_inode_operations; @@ -141,23 +140,19 @@ static int create_xattr(struct ubifs_info *c, struct inode *host, ui->data = kmalloc(size, GFP_NOFS); if (!ui->data) { err = -ENOMEM; - goto out_unlock; + goto out_free; } - memcpy(ui->data, value, size); + inode->i_size = ui->ui_size = size; + ui->data_len = size; + + mutex_lock(&host_ui->ui_mutex); host->i_ctime = ubifs_current_time(host); host_ui->xattr_cnt += 1; host_ui->xattr_size += CALC_DENT_SIZE(nm->len); host_ui->xattr_size += CALC_XATTR_BYTES(size); host_ui->xattr_names += nm->len; - /* - * We do not use i_size_write() because nobody can race with us as we - * are holding host @host->i_mutex - every xattr operation for this - * inode is serialized by it. - */ - inode->i_size = ui->ui_size = size; - ui->data_len = size; err = ubifs_jnl_update(c, host, nm, inode, 0, 1); if (err) goto out_cancel; @@ -172,8 +167,8 @@ out_cancel: host_ui->xattr_cnt -= 1; host_ui->xattr_size -= CALC_DENT_SIZE(nm->len); host_ui->xattr_size -= CALC_XATTR_BYTES(size); -out_unlock: mutex_unlock(&host_ui->ui_mutex); +out_free: make_bad_inode(inode); iput(inode); out_budg: @@ -200,29 +195,28 @@ static int change_xattr(struct ubifs_info *c, struct inode *host, struct ubifs_inode *host_ui = ubifs_inode(host); struct ubifs_inode *ui = ubifs_inode(inode); struct ubifs_budget_req req = { .dirtied_ino = 2, - .dirtied_ino_d = size + host_ui->data_len }; + .dirtied_ino_d = ALIGN(size, 8) + ALIGN(host_ui->data_len, 8) }; ubifs_assert(ui->data_len == inode->i_size); err = ubifs_budget_space(c, &req); if (err) return err; - mutex_lock(&host_ui->ui_mutex); - host->i_ctime = ubifs_current_time(host); - host_ui->xattr_size -= CALC_XATTR_BYTES(ui->data_len); - host_ui->xattr_size += CALC_XATTR_BYTES(size); - kfree(ui->data); ui->data = kmalloc(size, GFP_NOFS); if (!ui->data) { err = -ENOMEM; - goto out_unlock; + goto out_free; } - memcpy(ui->data, value, size); inode->i_size = ui->ui_size = size; ui->data_len = size; + mutex_lock(&host_ui->ui_mutex); + host->i_ctime = ubifs_current_time(host); + host_ui->xattr_size -= CALC_XATTR_BYTES(ui->data_len); + host_ui->xattr_size += CALC_XATTR_BYTES(size); + /* * It is important to write the host inode after the xattr inode * because if the host inode gets synchronized (via 'fsync()'), then @@ -240,9 +234,9 @@ static int change_xattr(struct ubifs_info *c, struct inode *host, out_cancel: host_ui->xattr_size -= CALC_XATTR_BYTES(size); host_ui->xattr_size += CALC_XATTR_BYTES(ui->data_len); - make_bad_inode(inode); -out_unlock: mutex_unlock(&host_ui->ui_mutex); + make_bad_inode(inode); +out_free: ubifs_release_budget(c, &req); return err; } @@ -312,6 +306,7 @@ int ubifs_setxattr(struct dentry *dentry, const char *name, dbg_gen("xattr '%s', host ino %lu ('%.*s'), size %zd", name, host->i_ino, dentry->d_name.len, dentry->d_name.name, size); + ubifs_assert(mutex_is_locked(&host->i_mutex)); if (size > UBIFS_MAX_INO_DATA) return -ERANGE; @@ -384,7 +379,6 @@ ssize_t ubifs_getxattr(struct dentry *dentry, const char *name, void *buf, if (!xent) return -ENOMEM; - mutex_lock(&host->i_mutex); xent_key_init(c, &key, host->i_ino, &nm); err = ubifs_tnc_lookup_nm(c, &key, xent, &nm); if (err) { @@ -419,7 +413,6 @@ ssize_t ubifs_getxattr(struct dentry *dentry, const char *name, void *buf, out_iput: iput(inode); out_unlock: - mutex_unlock(&host->i_mutex); kfree(xent); return err; } @@ -449,8 +442,6 @@ ssize_t ubifs_listxattr(struct dentry *dentry, char *buffer, size_t size) return -ERANGE; lowest_xent_key(c, &key, host->i_ino); - - mutex_lock(&host->i_mutex); while (1) { int type; @@ -479,7 +470,6 @@ ssize_t ubifs_listxattr(struct dentry *dentry, char *buffer, size_t size) pxent = xent; key_read(c, &xent->key, &key); } - mutex_unlock(&host->i_mutex); kfree(pxent); if (err != -ENOENT) { @@ -497,8 +487,8 @@ static int remove_xattr(struct ubifs_info *c, struct inode *host, int err; struct ubifs_inode *host_ui = ubifs_inode(host); struct ubifs_inode *ui = ubifs_inode(inode); - struct ubifs_budget_req req = { .dirtied_ino = 1, .mod_dent = 1, - .dirtied_ino_d = host_ui->data_len }; + struct ubifs_budget_req req = { .dirtied_ino = 2, .mod_dent = 1, + .dirtied_ino_d = ALIGN(host_ui->data_len, 8) }; ubifs_assert(ui->data_len == inode->i_size); diff --git a/include/acpi/acnamesp.h b/include/acpi/acnamesp.h index 9ed70a05058..c34008507b6 100644 --- a/include/acpi/acnamesp.h +++ b/include/acpi/acnamesp.h @@ -182,7 +182,7 @@ acpi_status acpi_ns_evaluate(struct acpi_evaluate_info *info); */ u32 acpi_ns_opens_scope(acpi_object_type type); -void +acpi_status acpi_ns_build_external_path(struct acpi_namespace_node *node, acpi_size size, char *name_buffer); diff --git a/include/asm-arm/plat-s3c/regs-nand.h b/include/asm-arm/plat-s3c/regs-nand.h index 09f0b5503f5..b2caa4bca27 100644 --- a/include/asm-arm/plat-s3c/regs-nand.h +++ b/include/asm-arm/plat-s3c/regs-nand.h @@ -11,7 +11,7 @@ */ #ifndef __ASM_ARM_REGS_NAND -#define __ASM_ARM_REGS_NAND "$Id: nand.h,v 1.3 2003/12/09 11:36:29 ben Exp $" +#define __ASM_ARM_REGS_NAND #define S3C2410_NFREG(x) (x) diff --git a/include/asm-arm/plat-s3c/regs-timer.h b/include/asm-arm/plat-s3c/regs-timer.h index b4366ea3967..cc0eedd53e3 100644 --- a/include/asm-arm/plat-s3c/regs-timer.h +++ b/include/asm-arm/plat-s3c/regs-timer.h @@ -12,7 +12,7 @@ #ifndef __ASM_ARCH_REGS_TIMER_H -#define __ASM_ARCH_REGS_TIMER_H "$Id: timer.h,v 1.4 2003/05/06 19:30:50 ben Exp $" +#define __ASM_ARCH_REGS_TIMER_H #define S3C_TIMERREG(x) (S3C_VA_TIMER + (x)) #define S3C_TIMERREG2(tmr,reg) S3C_TIMERREG((reg)+0x0c+((tmr)*0x0c)) diff --git a/include/asm-arm/plat-s3c/regs-watchdog.h b/include/asm-arm/plat-s3c/regs-watchdog.h index 1229f076c0a..4938492470f 100644 --- a/include/asm-arm/plat-s3c/regs-watchdog.h +++ b/include/asm-arm/plat-s3c/regs-watchdog.h @@ -12,7 +12,7 @@ #ifndef __ASM_ARCH_REGS_WATCHDOG_H -#define __ASM_ARCH_REGS_WATCHDOG_H "$Id: watchdog.h,v 1.2 2003/04/29 13:31:09 ben Exp $" +#define __ASM_ARCH_REGS_WATCHDOG_H #define S3C_WDOGREG(x) ((x) + S3C_VA_WATCHDOG) diff --git a/include/asm-arm/plat-s3c24xx/s3c2410.h b/include/asm-arm/plat-s3c24xx/s3c2410.h index 36de0b83587..3cd1ec677b3 100644 --- a/include/asm-arm/plat-s3c24xx/s3c2410.h +++ b/include/asm-arm/plat-s3c24xx/s3c2410.h @@ -21,11 +21,11 @@ extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); extern void s3c2410_init_clocks(int xtal); -extern int s3c2410_baseclk_add(void); - #else #define s3c2410_init_clocks NULL #define s3c2410_init_uarts NULL #define s3c2410_map_io NULL #define s3c2410_init NULL #endif + +extern int s3c2410_baseclk_add(void); diff --git a/include/asm-blackfin/Kbuild b/include/asm-blackfin/Kbuild index 71f8fe78325..606ecfdcc96 100644 --- a/include/asm-blackfin/Kbuild +++ b/include/asm-blackfin/Kbuild @@ -1,3 +1,3 @@ include include/asm-generic/Kbuild.asm -header-y += fixed_code.h +unifdef-y += fixed_code.h diff --git a/include/asm-blackfin/bfin-global.h b/include/asm-blackfin/bfin-global.h index 320aa5e167e..7ba70de66f2 100644 --- a/include/asm-blackfin/bfin-global.h +++ b/include/asm-blackfin/bfin-global.h @@ -56,37 +56,20 @@ extern void dump_bfin_process(struct pt_regs *regs); extern void dump_bfin_mem(struct pt_regs *regs); extern void dump_bfin_trace_buffer(void); +/* init functions only */ extern int init_arch_irq(void); -extern void bfin_reset(void); -extern void _cplb_hdr(void); -/* Blackfin cache functions */ extern void bfin_icache_init(void); extern void bfin_dcache_init(void); -extern int read_iloc(void); -extern int bfin_console_init(void); -extern asmlinkage void lower_to_irq14(void); -extern asmlinkage void bfin_return_from_exception(void); extern void init_exception_vectors(void); -extern void init_dma(void); extern void program_IAR(void); -extern void evt14_softirq(void); + +extern void bfin_reset(void); +extern asmlinkage void lower_to_irq14(void); +extern asmlinkage void bfin_return_from_exception(void); +extern asmlinkage void evt14_softirq(void); extern asmlinkage void asm_do_IRQ(unsigned int irq, struct pt_regs *regs); -extern void bfin_gpio_interrupt_setup(int irq, int irq_pfx, int type); extern int bfin_internal_set_wake(unsigned int irq, unsigned int state); -extern asmlinkage void finish_atomic_sections (struct pt_regs *regs); -extern char fixed_code_start; -extern char fixed_code_end; -extern int atomic_xchg32(void); -extern int atomic_cas32(void); -extern int atomic_add32(void); -extern int atomic_sub32(void); -extern int atomic_ior32(void); -extern int atomic_and32(void); -extern int atomic_xor32(void); -extern void safe_user_instruction(void); -extern void sigreturn_stub(void); - extern void *l1_data_A_sram_alloc(size_t); extern void *l1_data_B_sram_alloc(size_t); extern void *l1_inst_sram_alloc(size_t); @@ -110,11 +93,10 @@ extern void *sram_alloc_with_lsl(size_t, unsigned long); extern int sram_free_with_lsl(const void*); extern const char bfin_board_name[]; -extern unsigned long wall_jiffies; extern unsigned long bfin_sic_iwr[]; +extern unsigned vr_wakeup; extern u16 _bfin_swrst; /* shadow for Software Reset Register (SWRST) */ -extern struct file_operations dpmc_fops; extern unsigned long _ramstart, _ramend, _rambase; extern unsigned long memory_start, memory_end, physical_mem_end; extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[], @@ -122,8 +104,12 @@ extern char _stext_l1[], _etext_l1[], _sdata_l1[], _edata_l1[], _sbss_l1[], _stext_l2[], _etext_l2[], _sdata_l2[], _edata_l2[], _sbss_l2[], _ebss_l2[], _l2_lma_start[]; -#ifdef CONFIG_MTD_UCLINUX +/* only used when CONFIG_MTD_UCLINUX */ extern unsigned long memory_mtd_start, memory_mtd_end, mtd_size; + +#ifdef CONFIG_BFIN_ICACHE_LOCK +extern void cache_grab_lock(int way); +extern void cache_lock(int way); #endif #endif diff --git a/include/asm-blackfin/dpmc.h b/include/asm-blackfin/dpmc.h index de28e6e018b..96e8208f929 100644 --- a/include/asm-blackfin/dpmc.h +++ b/include/asm-blackfin/dpmc.h @@ -11,7 +11,6 @@ #ifndef __ASSEMBLY__ void sleep_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2); -void deep_sleep(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2); void hibernate_mode(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2); void sleep_deeper(u32 sic_iwr0, u32 sic_iwr1, u32 sic_iwr2); void do_hibernate(int wakeup); diff --git a/include/asm-blackfin/fixed_code.h b/include/asm-blackfin/fixed_code.h index 37db66c7030..32c4d495d84 100644 --- a/include/asm-blackfin/fixed_code.h +++ b/include/asm-blackfin/fixed_code.h @@ -1,6 +1,28 @@ /* This file defines the fixed addresses where userspace programs can find atomic code sequences. */ +#ifndef __BFIN_ASM_FIXED_CODE_H__ +#define __BFIN_ASM_FIXED_CODE_H__ + +#ifdef __KERNEL__ +#ifndef __ASSEMBLY__ +#include <linux/linkage.h> +#include <linux/ptrace.h> +extern asmlinkage void finish_atomic_sections(struct pt_regs *regs); +extern char fixed_code_start; +extern char fixed_code_end; +extern int atomic_xchg32(void); +extern int atomic_cas32(void); +extern int atomic_add32(void); +extern int atomic_sub32(void); +extern int atomic_ior32(void); +extern int atomic_and32(void); +extern int atomic_xor32(void); +extern void safe_user_instruction(void); +extern void sigreturn_stub(void); +#endif +#endif + #define FIXED_CODE_START 0x400 #define SIGRETURN_STUB 0x400 @@ -20,3 +42,5 @@ #define SAFE_USER_INSTRUCTION 0x480 #define FIXED_CODE_END 0x490 + +#endif diff --git a/include/asm-blackfin/mach-bf527/mem_map.h b/include/asm-blackfin/mach-bf527/mem_map.h index 193082deaa4..ef46dc991cd 100644 --- a/include/asm-blackfin/mach-bf527/mem_map.h +++ b/include/asm-blackfin/mach-bf527/mem_map.h @@ -89,6 +89,11 @@ #define BFIN_DSUPBANKS 0 #endif /*CONFIG_BFIN_DCACHE */ +/* Level 2 Memory - none */ + +#define L2_START 0 +#define L2_LENGTH 0 + /* Scratch Pad Memory */ #define L1_SCRATCH_START 0xFFB00000 diff --git a/include/asm-blackfin/mach-bf533/mem_init.h b/include/asm-blackfin/mach-bf533/mem_init.h index 995c06b2b1e..ed2034bf10e 100644 --- a/include/asm-blackfin/mach-bf533/mem_init.h +++ b/include/asm-blackfin/mach-bf533/mem_init.h @@ -47,7 +47,7 @@ #define SDRAM_tRCD TRCD_2 #define SDRAM_tWR TWR_2 #endif -#if (CONFIG_SCLK_HZ > 8955223) && (CONFIG_SCLK_HZ <= 104477612) +#if (CONFIG_SCLK_HZ > 89552239) && (CONFIG_SCLK_HZ <= 104477612) #define SDRAM_tRP TRP_2 #define SDRAM_tRP_num 2 #define SDRAM_tRAS TRAS_5 diff --git a/include/asm-blackfin/mach-bf533/mem_map.h b/include/asm-blackfin/mach-bf533/mem_map.h index bd30b6f3be0..581fc6eea78 100644 --- a/include/asm-blackfin/mach-bf533/mem_map.h +++ b/include/asm-blackfin/mach-bf533/mem_map.h @@ -158,6 +158,11 @@ #endif +/* Level 2 Memory - none */ + +#define L2_START 0 +#define L2_LENGTH 0 + /* Scratch Pad Memory */ #define L1_SCRATCH_START 0xFFB00000 diff --git a/include/asm-blackfin/mach-bf537/mem_map.h b/include/asm-blackfin/mach-bf537/mem_map.h index 5c6726d6f3b..5078b669431 100644 --- a/include/asm-blackfin/mach-bf537/mem_map.h +++ b/include/asm-blackfin/mach-bf537/mem_map.h @@ -166,6 +166,11 @@ #endif +/* Level 2 Memory - none */ + +#define L2_START 0 +#define L2_LENGTH 0 + /* Scratch Pad Memory */ #define L1_SCRATCH_START 0xFFB00000 diff --git a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h index ede210eca4e..d39c396f850 100644 --- a/include/asm-blackfin/mach-common/cdef_LPBlackfin.h +++ b/include/asm-blackfin/mach-common/cdef_LPBlackfin.h @@ -39,11 +39,7 @@ #define bfin_read_SRAM_BASE_ADDRESS() bfin_read32(SRAM_BASE_ADDRESS) #define bfin_write_SRAM_BASE_ADDRESS(val) bfin_write32(SRAM_BASE_ADDRESS,val) #define bfin_read_DMEM_CONTROL() bfin_read32(DMEM_CONTROL) -#if ANOMALY_05000125 -extern void bfin_write_DMEM_CONTROL(unsigned int val); -#else #define bfin_write_DMEM_CONTROL(val) bfin_write32(DMEM_CONTROL,val) -#endif #define bfin_read_DCPLB_STATUS() bfin_read32(DCPLB_STATUS) #define bfin_write_DCPLB_STATUS(val) bfin_write32(DCPLB_STATUS,val) #define bfin_read_DCPLB_FAULT_ADDR() bfin_read32(DCPLB_FAULT_ADDR) @@ -129,11 +125,7 @@ extern void bfin_write_DMEM_CONTROL(unsigned int val); #define DTEST_DATA3 0xFFE0040C */ #define bfin_read_IMEM_CONTROL() bfin_read32(IMEM_CONTROL) -#if ANOMALY_05000125 -extern void bfin_write_IMEM_CONTROL(unsigned int val); -#else #define bfin_write_IMEM_CONTROL(val) bfin_write32(IMEM_CONTROL,val) -#endif #define bfin_read_ICPLB_STATUS() bfin_read32(ICPLB_STATUS) #define bfin_write_ICPLB_STATUS(val) bfin_write32(ICPLB_STATUS,val) #define bfin_read_ICPLB_FAULT_ADDR() bfin_read32(ICPLB_FAULT_ADDR) diff --git a/include/asm-blackfin/unistd.h b/include/asm-blackfin/unistd.h index 42955d0c439..1e57b636e0b 100644 --- a/include/asm-blackfin/unistd.h +++ b/include/asm-blackfin/unistd.h @@ -372,8 +372,14 @@ #define __NR_semtimedop 357 #define __NR_timerfd_settime 358 #define __NR_timerfd_gettime 359 +#define __NR_signalfd4 360 +#define __NR_eventfd2 361 +#define __NR_epoll_create1 362 +#define __NR_dup3 363 +#define __NR_pipe2 364 +#define __NR_inotify_init1 365 -#define __NR_syscall 360 +#define __NR_syscall 366 #define NR_syscalls __NR_syscall /* Old optional stuff no one actually uses */ diff --git a/include/asm-mips/kexec.h b/include/asm-mips/kexec.h index cdbab43b7d3..4314892aaeb 100644 --- a/include/asm-mips/kexec.h +++ b/include/asm-mips/kexec.h @@ -16,7 +16,7 @@ /* Maximum address we can use for the control code buffer */ #define KEXEC_CONTROL_MEMORY_LIMIT (0x20000000) -#define KEXEC_CONTROL_CODE_SIZE 4096 +#define KEXEC_CONTROL_PAGE_SIZE 4096 /* The native architecture */ #define KEXEC_ARCH KEXEC_ARCH_MIPS diff --git a/include/asm-x86/amd_iommu_types.h b/include/asm-x86/amd_iommu_types.h index 22aa58ca199..dcc81206739 100644 --- a/include/asm-x86/amd_iommu_types.h +++ b/include/asm-x86/amd_iommu_types.h @@ -31,9 +31,6 @@ #define ALIAS_TABLE_ENTRY_SIZE 2 #define RLOOKUP_TABLE_ENTRY_SIZE (sizeof(void *)) -/* helper macros */ -#define LOW_U32(x) ((x) & ((1ULL << 32)-1)) - /* Length of the MMIO region for the AMD IOMMU */ #define MMIO_REGION_LENGTH 0x4000 @@ -69,6 +66,9 @@ #define MMIO_EVT_TAIL_OFFSET 0x2018 #define MMIO_STATUS_OFFSET 0x2020 +/* MMIO status bits */ +#define MMIO_STATUS_COM_WAIT_INT_MASK 0x04 + /* feature control bits */ #define CONTROL_IOMMU_EN 0x00ULL #define CONTROL_HT_TUN_EN 0x01ULL @@ -89,6 +89,7 @@ #define CMD_INV_IOMMU_PAGES 0x03 #define CMD_COMPL_WAIT_STORE_MASK 0x01 +#define CMD_COMPL_WAIT_INT_MASK 0x02 #define CMD_INV_IOMMU_PAGES_SIZE_MASK 0x01 #define CMD_INV_IOMMU_PAGES_PDE_MASK 0x02 @@ -99,6 +100,7 @@ #define DEV_ENTRY_TRANSLATION 0x01 #define DEV_ENTRY_IR 0x3d #define DEV_ENTRY_IW 0x3e +#define DEV_ENTRY_NO_PAGE_FAULT 0x62 #define DEV_ENTRY_EX 0x67 #define DEV_ENTRY_SYSMGT1 0x68 #define DEV_ENTRY_SYSMGT2 0x69 diff --git a/include/asm-x86/geode.h b/include/asm-x86/geode.h index bb06027fc83..2c1cda0b8a8 100644 --- a/include/asm-x86/geode.h +++ b/include/asm-x86/geode.h @@ -50,6 +50,7 @@ extern int geode_get_dev_base(unsigned int dev); #define MSR_PIC_YSEL_HIGH 0x51400021 #define MSR_PIC_ZSEL_LOW 0x51400022 #define MSR_PIC_ZSEL_HIGH 0x51400023 +#define MSR_PIC_IRQM_LPC 0x51400025 #define MSR_MFGPT_IRQ 0x51400028 #define MSR_MFGPT_NR 0x51400029 @@ -237,7 +238,7 @@ static inline u16 geode_mfgpt_read(int timer, u16 reg) } extern int geode_mfgpt_toggle_event(int timer, int cmp, int event, int enable); -extern int geode_mfgpt_set_irq(int timer, int cmp, int irq, int enable); +extern int geode_mfgpt_set_irq(int timer, int cmp, int *irq, int enable); extern int geode_mfgpt_alloc_timer(int timer, int domain); #define geode_mfgpt_setup_irq(t, c, i) geode_mfgpt_set_irq((t), (c), (i), 1) diff --git a/include/asm-x86/i387.h b/include/asm-x86/i387.h index 6d3b2106341..56d00e31aec 100644 --- a/include/asm-x86/i387.h +++ b/include/asm-x86/i387.h @@ -63,8 +63,6 @@ static inline int restore_fpu_checking(struct i387_fxsave_struct *fx) #else : [fx] "cdaSDb" (fx), "m" (*fx), "0" (0)); #endif - if (unlikely(err)) - init_fpu(current); return err; } diff --git a/include/asm-x86/io.h b/include/asm-x86/io.h index bf5d629b3a3..0f954dc89cb 100644 --- a/include/asm-x86/io.h +++ b/include/asm-x86/io.h @@ -21,7 +21,7 @@ extern void __iomem *fix_ioremap(unsigned idx, unsigned long phys); #define build_mmio_read(name, size, type, reg, barrier) \ static inline type name(const volatile void __iomem *addr) \ -{ type ret; asm volatile("mov" size " %1,%0":"=" reg (ret) \ +{ type ret; asm volatile("mov" size " %1,%0":reg (ret) \ :"m" (*(volatile type __force *)addr) barrier); return ret; } #define build_mmio_write(name, size, type, reg, barrier) \ @@ -29,13 +29,13 @@ static inline void name(type val, volatile void __iomem *addr) \ { asm volatile("mov" size " %0,%1": :reg (val), \ "m" (*(volatile type __force *)addr) barrier); } -build_mmio_read(readb, "b", unsigned char, "q", :"memory") -build_mmio_read(readw, "w", unsigned short, "r", :"memory") -build_mmio_read(readl, "l", unsigned int, "r", :"memory") +build_mmio_read(readb, "b", unsigned char, "=q", :"memory") +build_mmio_read(readw, "w", unsigned short, "=r", :"memory") +build_mmio_read(readl, "l", unsigned int, "=r", :"memory") -build_mmio_read(__readb, "b", unsigned char, "q", ) -build_mmio_read(__readw, "w", unsigned short, "r", ) -build_mmio_read(__readl, "l", unsigned int, "r", ) +build_mmio_read(__readb, "b", unsigned char, "=q", ) +build_mmio_read(__readw, "w", unsigned short, "=r", ) +build_mmio_read(__readl, "l", unsigned int, "=r", ) build_mmio_write(writeb, "b", unsigned char, "q", :"memory") build_mmio_write(writew, "w", unsigned short, "r", :"memory") @@ -59,8 +59,8 @@ build_mmio_write(__writel, "l", unsigned int, "r", ) #define mmiowb() barrier() #ifdef CONFIG_X86_64 -build_mmio_read(readq, "q", unsigned long, "r", :"memory") -build_mmio_read(__readq, "q", unsigned long, "r", ) +build_mmio_read(readq, "q", unsigned long, "=r", :"memory") +build_mmio_read(__readq, "q", unsigned long, "=r", ) build_mmio_write(writeq, "q", unsigned long, "r", :"memory") build_mmio_write(__writeq, "q", unsigned long, "r", ) diff --git a/include/asm-x86/kexec.h b/include/asm-x86/kexec.h index c0e52a14fd4..4246ab7dc98 100644 --- a/include/asm-x86/kexec.h +++ b/include/asm-x86/kexec.h @@ -41,6 +41,10 @@ # define PAGES_NR 17 #endif +#ifdef CONFIG_X86_32 +# define KEXEC_CONTROL_CODE_MAX_SIZE 2048 +#endif + #ifndef __ASSEMBLY__ #include <linux/string.h> @@ -63,7 +67,7 @@ /* Maximum address we can use for the control code buffer */ # define KEXEC_CONTROL_MEMORY_LIMIT TASK_SIZE -# define KEXEC_CONTROL_CODE_SIZE 4096 +# define KEXEC_CONTROL_PAGE_SIZE 4096 /* The native architecture */ # define KEXEC_ARCH KEXEC_ARCH_386 @@ -79,7 +83,7 @@ # define KEXEC_CONTROL_MEMORY_LIMIT (0xFFFFFFFFFFUL) /* Allocate one page for the pdp and the second for the code */ -# define KEXEC_CONTROL_CODE_SIZE (4096UL + 4096UL) +# define KEXEC_CONTROL_PAGE_SIZE (4096UL + 4096UL) /* The native architecture */ # define KEXEC_ARCH KEXEC_ARCH_X86_64 diff --git a/include/asm-x86/mman.h b/include/asm-x86/mman.h index c1682b542da..90bc4108a4f 100644 --- a/include/asm-x86/mman.h +++ b/include/asm-x86/mman.h @@ -12,6 +12,7 @@ #define MAP_NORESERVE 0x4000 /* don't check for reservations */ #define MAP_POPULATE 0x8000 /* populate (prefault) pagetables */ #define MAP_NONBLOCK 0x10000 /* do not block on IO */ +#define MAP_STACK 0x20000 /* give out an address that is best suited for process/thread stacks */ #define MCL_CURRENT 1 /* lock all current mappings */ #define MCL_FUTURE 2 /* lock all future mappings */ diff --git a/include/asm-x86/mmzone_32.h b/include/asm-x86/mmzone_32.h index b2298a22756..5862e646065 100644 --- a/include/asm-x86/mmzone_32.h +++ b/include/asm-x86/mmzone_32.h @@ -97,10 +97,16 @@ static inline int pfn_valid(int pfn) reserve_bootmem_node(NODE_DATA(0), (addr), (size), (flags)) #define alloc_bootmem(x) \ __alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, __pa(MAX_DMA_ADDRESS)) +#define alloc_bootmem_nopanic(x) \ + __alloc_bootmem_node_nopanic(NODE_DATA(0), (x), SMP_CACHE_BYTES, \ + __pa(MAX_DMA_ADDRESS)) #define alloc_bootmem_low(x) \ __alloc_bootmem_node(NODE_DATA(0), (x), SMP_CACHE_BYTES, 0) #define alloc_bootmem_pages(x) \ __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, __pa(MAX_DMA_ADDRESS)) +#define alloc_bootmem_pages_nopanic(x) \ + __alloc_bootmem_node_nopanic(NODE_DATA(0), (x), PAGE_SIZE, \ + __pa(MAX_DMA_ADDRESS)) #define alloc_bootmem_low_pages(x) \ __alloc_bootmem_node(NODE_DATA(0), (x), PAGE_SIZE, 0) #define alloc_bootmem_node(pgdat, x) \ diff --git a/include/asm-x86/pgtable_64.h b/include/asm-x86/pgtable_64.h index ac5fff4cc58..549144d03d9 100644 --- a/include/asm-x86/pgtable_64.h +++ b/include/asm-x86/pgtable_64.h @@ -151,7 +151,7 @@ static inline void native_pgd_clear(pgd_t *pgd) #define VMALLOC_END _AC(0xffffe1ffffffffff, UL) #define VMEMMAP_START _AC(0xffffe20000000000, UL) #define MODULES_VADDR _AC(0xffffffffa0000000, UL) -#define MODULES_END _AC(0xfffffffffff00000, UL) +#define MODULES_END _AC(0xffffffffff000000, UL) #define MODULES_LEN (MODULES_END - MODULES_VADDR) #ifndef __ASSEMBLY__ diff --git a/include/asm-x86/processor.h b/include/asm-x86/processor.h index 5f58da401b4..4df3e2f6fb5 100644 --- a/include/asm-x86/processor.h +++ b/include/asm-x86/processor.h @@ -728,6 +728,29 @@ extern unsigned long boot_option_idle_override; extern unsigned long idle_halt; extern unsigned long idle_nomwait; +/* + * on systems with caches, caches must be flashed as the absolute + * last instruction before going into a suspended halt. Otherwise, + * dirty data can linger in the cache and become stale on resume, + * leading to strange errors. + * + * perform a variety of operations to guarantee that the compiler + * will not reorder instructions. wbinvd itself is serializing + * so the processor will not reorder. + * + * Systems without cache can just go into halt. + */ +static inline void wbinvd_halt(void) +{ + mb(); + /* check for clflush to determine if wbinvd is legal */ + if (cpu_has_clflush) + asm volatile("cli; wbinvd; 1: hlt; jmp 1b" : : : "memory"); + else + while (1) + halt(); +} + extern void enable_sep_cpu(void); extern int sysenter_setup(void); diff --git a/include/asm-x86/spinlock.h b/include/asm-x86/spinlock.h index 4f9a9861799..e39c790dbfd 100644 --- a/include/asm-x86/spinlock.h +++ b/include/asm-x86/spinlock.h @@ -65,7 +65,7 @@ static inline int __ticket_spin_is_contended(raw_spinlock_t *lock) { int tmp = ACCESS_ONCE(lock->slock); - return (((tmp >> 8) & 0xff) - (tmp & 0xff)) > 1; + return (((tmp >> 8) - tmp) & 0xff) > 1; } static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock) @@ -127,7 +127,7 @@ static inline int __ticket_spin_is_contended(raw_spinlock_t *lock) { int tmp = ACCESS_ONCE(lock->slock); - return (((tmp >> 16) & 0xffff) - (tmp & 0xffff)) > 1; + return (((tmp >> 16) - tmp) & 0xffff) > 1; } static __always_inline void __ticket_spin_lock(raw_spinlock_t *lock) diff --git a/include/linux/Kbuild b/include/linux/Kbuild index 327f60658d9..7d970678f94 100644 --- a/include/linux/Kbuild +++ b/include/linux/Kbuild @@ -250,6 +250,8 @@ unifdef-y += isdn.h unifdef-y += isdnif.h unifdef-y += isdn_divertif.h unifdef-y += isdn_ppp.h +unifdef-y += ivtv.h +unifdef-y += ivtvfb.h unifdef-y += joystick.h unifdef-y += kdev_t.h unifdef-y += kd.h diff --git a/include/linux/capability.h b/include/linux/capability.h index 02673846d20..9d1fe30b6f6 100644 --- a/include/linux/capability.h +++ b/include/linux/capability.h @@ -503,8 +503,19 @@ extern const kernel_cap_t __cap_init_eff_set; kernel_cap_t cap_set_effective(const kernel_cap_t pE_new); -int capable(int cap); -int __capable(struct task_struct *t, int cap); +/** + * has_capability - Determine if a task has a superior capability available + * @t: The task in question + * @cap: The capability to be tested for + * + * Return true if the specified task has the given superior capability + * currently in effect, false if not. + * + * Note that this does not set PF_SUPERPRIV on the task. + */ +#define has_capability(t, cap) (security_capable((t), (cap)) == 0) + +extern int capable(int cap); #endif /* __KERNEL__ */ diff --git a/include/linux/completion.h b/include/linux/completion.h index 57faa60de9b..02ef8835999 100644 --- a/include/linux/completion.h +++ b/include/linux/completion.h @@ -49,6 +49,8 @@ extern unsigned long wait_for_completion_timeout(struct completion *x, unsigned long timeout); extern unsigned long wait_for_completion_interruptible_timeout( struct completion *x, unsigned long timeout); +extern bool try_wait_for_completion(struct completion *x); +extern bool completion_done(struct completion *x); extern void complete(struct completion *); extern void complete_all(struct completion *); @@ -56,48 +58,4 @@ extern void complete_all(struct completion *); #define INIT_COMPLETION(x) ((x).done = 0) -/** - * try_wait_for_completion - try to decrement a completion without blocking - * @x: completion structure - * - * Returns: 0 if a decrement cannot be done without blocking - * 1 if a decrement succeeded. - * - * If a completion is being used as a counting completion, - * attempt to decrement the counter without blocking. This - * enables us to avoid waiting if the resource the completion - * is protecting is not available. - */ -static inline bool try_wait_for_completion(struct completion *x) -{ - int ret = 1; - - spin_lock_irq(&x->wait.lock); - if (!x->done) - ret = 0; - else - x->done--; - spin_unlock_irq(&x->wait.lock); - return ret; -} - -/** - * completion_done - Test to see if a completion has any waiters - * @x: completion structure - * - * Returns: 0 if there are waiters (wait_for_completion() in progress) - * 1 if there are no waiters. - * - */ -static inline bool completion_done(struct completion *x) -{ - int ret = 1; - - spin_lock_irq(&x->wait.lock); - if (!x->done) - ret = 0; - spin_unlock_irq(&x->wait.lock); - return ret; -} - #endif diff --git a/include/linux/ftrace.h b/include/linux/ftrace.h index f368d041e02..bb384068272 100644 --- a/include/linux/ftrace.h +++ b/include/linux/ftrace.h @@ -98,6 +98,27 @@ static inline void tracer_disable(void) #endif } +/* Ftrace disable/restore without lock. Some synchronization mechanism + * must be used to prevent ftrace_enabled to be changed between + * disable/restore. */ +static inline int __ftrace_enabled_save(void) +{ +#ifdef CONFIG_FTRACE + int saved_ftrace_enabled = ftrace_enabled; + ftrace_enabled = 0; + return saved_ftrace_enabled; +#else + return 0; +#endif +} + +static inline void __ftrace_enabled_restore(int enabled) +{ +#ifdef CONFIG_FTRACE + ftrace_enabled = enabled; +#endif +} + #ifdef CONFIG_FRAME_POINTER /* TODO: need to fix this for ARM */ # define CALLER_ADDR0 ((unsigned long)__builtin_return_address(0)) diff --git a/include/linux/ivtv.h b/include/linux/ivtv.h index 794b8daa937..17ca64b5a66 100644 --- a/include/linux/ivtv.h +++ b/include/linux/ivtv.h @@ -21,11 +21,7 @@ #ifndef __LINUX_IVTV_H__ #define __LINUX_IVTV_H__ -#ifdef __KERNEL__ -#include <linux/compiler.h> /* need __user */ -#else -#define __user -#endif +#include <linux/compiler.h> #include <linux/types.h> /* ivtv knows several distinct output modes: MPEG streaming, diff --git a/include/linux/ivtvfb.h b/include/linux/ivtvfb.h index e980ba62ddc..e20af47b59a 100644 --- a/include/linux/ivtvfb.h +++ b/include/linux/ivtvfb.h @@ -21,11 +21,7 @@ #ifndef __LINUX_IVTVFB_H__ #define __LINUX_IVTVFB_H__ -#ifdef __KERNEL__ -#include <linux/compiler.h> /* need __user */ -#else -#define __user -#endif +#include <linux/compiler.h> #include <linux/types.h> /* Framebuffer external API */ diff --git a/include/linux/kexec.h b/include/linux/kexec.h index 32110cede64..17f76fc0517 100644 --- a/include/linux/kexec.h +++ b/include/linux/kexec.h @@ -25,8 +25,8 @@ #error KEXEC_CONTROL_MEMORY_LIMIT not defined #endif -#ifndef KEXEC_CONTROL_CODE_SIZE -#error KEXEC_CONTROL_CODE_SIZE not defined +#ifndef KEXEC_CONTROL_PAGE_SIZE +#error KEXEC_CONTROL_PAGE_SIZE not defined #endif #ifndef KEXEC_ARCH diff --git a/include/linux/mm.h b/include/linux/mm.h index fa651609b65..72a15dc26bb 100644 --- a/include/linux/mm.h +++ b/include/linux/mm.h @@ -73,7 +73,7 @@ extern unsigned int kobjsize(const void *objp); #endif /* - * vm_flags.. + * vm_flags in vm_area_struct, see mm_types.h. */ #define VM_READ 0x00000001 /* currently active flags */ #define VM_WRITE 0x00000002 diff --git a/include/linux/mm_types.h b/include/linux/mm_types.h index 386edbe2cb4..bf334138c7c 100644 --- a/include/linux/mm_types.h +++ b/include/linux/mm_types.h @@ -113,7 +113,7 @@ struct vm_area_struct { struct vm_area_struct *vm_next; pgprot_t vm_page_prot; /* Access permissions of this VMA. */ - unsigned long vm_flags; /* Flags, listed below. */ + unsigned long vm_flags; /* Flags, see mm.h. */ struct rb_node vm_rb; diff --git a/include/linux/reboot.h b/include/linux/reboot.h index b93b541cf11..988e55fe649 100644 --- a/include/linux/reboot.h +++ b/include/linux/reboot.h @@ -59,6 +59,7 @@ extern void machine_crash_shutdown(struct pt_regs *); * Architecture independent implemenations of sys_reboot commands. */ +extern void kernel_restart_prepare(char *cmd); extern void kernel_restart(char *cmd); extern void kernel_halt(void); extern void kernel_power_off(void); diff --git a/include/linux/security.h b/include/linux/security.h index fd96e7f8a6f..2ee5ecfb239 100644 --- a/include/linux/security.h +++ b/include/linux/security.h @@ -46,8 +46,8 @@ struct audit_krule; */ extern int cap_capable(struct task_struct *tsk, int cap); extern int cap_settime(struct timespec *ts, struct timezone *tz); -extern int cap_ptrace(struct task_struct *parent, struct task_struct *child, - unsigned int mode); +extern int cap_ptrace_may_access(struct task_struct *child, unsigned int mode); +extern int cap_ptrace_traceme(struct task_struct *parent); extern int cap_capget(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted); extern int cap_capset_check(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted); extern void cap_capset_set(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted); @@ -1157,17 +1157,24 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) * @alter contains the flag indicating whether changes are to be made. * Return 0 if permission is granted. * - * @ptrace: - * Check permission before allowing the @parent process to trace the + * @ptrace_may_access: + * Check permission before allowing the current process to trace the * @child process. * Security modules may also want to perform a process tracing check * during an execve in the set_security or apply_creds hooks of * binprm_security_ops if the process is being traced and its security * attributes would be changed by the execve. - * @parent contains the task_struct structure for parent process. - * @child contains the task_struct structure for child process. + * @child contains the task_struct structure for the target process. * @mode contains the PTRACE_MODE flags indicating the form of access. * Return 0 if permission is granted. + * @ptrace_traceme: + * Check that the @parent process has sufficient permission to trace the + * current process before allowing the current process to present itself + * to the @parent process for tracing. + * The parent process will still have to undergo the ptrace_may_access + * checks before it is allowed to trace this one. + * @parent contains the task_struct structure for debugger process. + * Return 0 if permission is granted. * @capget: * Get the @effective, @inheritable, and @permitted capability sets for * the @target process. The hook may also perform permission checking to @@ -1287,8 +1294,8 @@ static inline void security_free_mnt_opts(struct security_mnt_opts *opts) struct security_operations { char name[SECURITY_NAME_MAX + 1]; - int (*ptrace) (struct task_struct *parent, struct task_struct *child, - unsigned int mode); + int (*ptrace_may_access) (struct task_struct *child, unsigned int mode); + int (*ptrace_traceme) (struct task_struct *parent); int (*capget) (struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, kernel_cap_t *permitted); @@ -1560,8 +1567,8 @@ extern struct dentry *securityfs_create_dir(const char *name, struct dentry *par extern void securityfs_remove(struct dentry *dentry); /* Security operations */ -int security_ptrace(struct task_struct *parent, struct task_struct *child, - unsigned int mode); +int security_ptrace_may_access(struct task_struct *child, unsigned int mode); +int security_ptrace_traceme(struct task_struct *parent); int security_capget(struct task_struct *target, kernel_cap_t *effective, kernel_cap_t *inheritable, @@ -1742,11 +1749,15 @@ static inline int security_init(void) return 0; } -static inline int security_ptrace(struct task_struct *parent, - struct task_struct *child, - unsigned int mode) +static inline int security_ptrace_may_access(struct task_struct *child, + unsigned int mode) +{ + return cap_ptrace_may_access(child, mode); +} + +static inline int security_ptrace_traceme(struct task_struct *child) { - return cap_ptrace(parent, child, mode); + return cap_ptrace_traceme(parent); } static inline int security_capget(struct task_struct *target, diff --git a/include/linux/suspend.h b/include/linux/suspend.h index c6343509597..2ce8207686e 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -217,11 +217,11 @@ struct platform_hibernation_ops { #ifdef CONFIG_HIBERNATION /* kernel/power/snapshot.c */ extern void __register_nosave_region(unsigned long b, unsigned long e, int km); -static inline void register_nosave_region(unsigned long b, unsigned long e) +static inline void __init register_nosave_region(unsigned long b, unsigned long e) { __register_nosave_region(b, e, 0); } -static inline void register_nosave_region_late(unsigned long b, unsigned long e) +static inline void __init register_nosave_region_late(unsigned long b, unsigned long e) { __register_nosave_region(b, e, 1); } diff --git a/include/linux/tty.h b/include/linux/tty.h index e3579cb086e..0cbec74ec08 100644 --- a/include/linux/tty.h +++ b/include/linux/tty.h @@ -331,6 +331,8 @@ extern int tty_write_room(struct tty_struct *tty); extern void tty_driver_flush_buffer(struct tty_struct *tty); extern void tty_throttle(struct tty_struct *tty); extern void tty_unthrottle(struct tty_struct *tty); +extern int tty_do_resize(struct tty_struct *tty, struct tty_struct *real_tty, + struct winsize *ws); extern int is_current_pgrp_orphaned(void); extern struct pid *tty_get_pgrp(struct tty_struct *tty); diff --git a/include/linux/tty_driver.h b/include/linux/tty_driver.h index e1065ac0d92..16d27944c32 100644 --- a/include/linux/tty_driver.h +++ b/include/linux/tty_driver.h @@ -168,6 +168,18 @@ * * Optional: If not provided then the write method is called under * the atomic write lock to keep it serialized with the ldisc. + * + * int (*resize)(struct tty_struct *tty, struct tty_struct *real_tty, + * unsigned int rows, unsigned int cols); + * + * Called when a termios request is issued which changes the + * requested terminal geometry. + * + * Optional: the default action is to update the termios structure + * without error. This is usually the correct behaviour. Drivers should + * not force errors here if they are not resizable objects (eg a serial + * line). See tty_do_resize() if you need to wrap the standard method + * in your own logic - the usual case. */ #include <linux/fs.h> @@ -206,6 +218,8 @@ struct tty_operations { int (*tiocmget)(struct tty_struct *tty, struct file *file); int (*tiocmset)(struct tty_struct *tty, struct file *file, unsigned int set, unsigned int clear); + int (*resize)(struct tty_struct *tty, struct tty_struct *real_tty, + struct winsize *ws); #ifdef CONFIG_CONSOLE_POLL int (*poll_init)(struct tty_driver *driver, int line, char *options); int (*poll_get_char)(struct tty_driver *driver, int line); diff --git a/include/linux/videodev2.h b/include/linux/videodev2.h index e466bd54a50..e65a6bed4e3 100644 --- a/include/linux/videodev2.h +++ b/include/linux/videodev2.h @@ -55,13 +55,13 @@ */ #ifndef __LINUX_VIDEODEV2_H #define __LINUX_VIDEODEV2_H + #ifdef __KERNEL__ #include <linux/time.h> /* need struct timeval */ -#include <linux/compiler.h> /* need __user */ #else -#define __user #include <sys/time.h> #endif +#include <linux/compiler.h> #include <linux/ioctl.h> #include <linux/types.h> diff --git a/include/linux/vmalloc.h b/include/linux/vmalloc.h index 364789aae9f..328eb402272 100644 --- a/include/linux/vmalloc.h +++ b/include/linux/vmalloc.h @@ -4,9 +4,9 @@ #include <linux/spinlock.h> #include <asm/page.h> /* pgprot_t */ -struct vm_area_struct; +struct vm_area_struct; /* vma defining user mapping in mm_types.h */ -/* bits in vm_struct->flags */ +/* bits in flags of vmalloc's vm_struct below */ #define VM_IOREMAP 0x00000001 /* ioremap() and friends */ #define VM_ALLOC 0x00000002 /* vmalloc() */ #define VM_MAP 0x00000004 /* vmap()ed pages */ diff --git a/include/linux/vt_kern.h b/include/linux/vt_kern.h index 1c78d56c57e..1cbd0a7db4e 100644 --- a/include/linux/vt_kern.h +++ b/include/linux/vt_kern.h @@ -35,7 +35,6 @@ extern int fg_console, last_console, want_console; int vc_allocate(unsigned int console); int vc_cons_allocated(unsigned int console); int vc_resize(struct vc_data *vc, unsigned int cols, unsigned int lines); -int vc_lock_resize(struct vc_data *vc, unsigned int cols, unsigned int lines); void vc_deallocate(unsigned int console); void reset_palette(struct vc_data *vc); void do_blank_screen(int entering_gfx); diff --git a/init/Kconfig b/init/Kconfig index b678803decc..c11da38837e 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -558,17 +558,6 @@ config SYSCTL_SYSCALL If unsure say Y here. -config SYSCTL_SYSCALL_CHECK - bool "Sysctl checks" if EMBEDDED - depends on SYSCTL_SYSCALL - default y - ---help--- - sys_sysctl uses binary paths that have been found challenging - to properly maintain and use. This enables checks that help - you to keep things correct. - - If unsure say Y here. - config KALLSYMS bool "Load all symbols for debugging/ksymoops" if EMBEDDED default y diff --git a/kernel/capability.c b/kernel/capability.c index 0101e847603..33e51e78c2d 100644 --- a/kernel/capability.c +++ b/kernel/capability.c @@ -486,17 +486,22 @@ asmlinkage long sys_capset(cap_user_header_t header, const cap_user_data_t data) return ret; } -int __capable(struct task_struct *t, int cap) +/** + * capable - Determine if the current task has a superior capability in effect + * @cap: The capability to be tested for + * + * Return true if the current task has the given superior capability currently + * available for use, false if not. + * + * This sets PF_SUPERPRIV on the task if the capability is available on the + * assumption that it's about to be used. + */ +int capable(int cap) { - if (security_capable(t, cap) == 0) { - t->flags |= PF_SUPERPRIV; + if (has_capability(current, cap)) { + current->flags |= PF_SUPERPRIV; return 1; } return 0; } - -int capable(int cap) -{ - return __capable(current, cap); -} EXPORT_SYMBOL(capable); diff --git a/kernel/kexec.c b/kernel/kexec.c index c8a4370e2a3..59f3f0df35d 100644 --- a/kernel/kexec.c +++ b/kernel/kexec.c @@ -12,7 +12,7 @@ #include <linux/slab.h> #include <linux/fs.h> #include <linux/kexec.h> -#include <linux/spinlock.h> +#include <linux/mutex.h> #include <linux/list.h> #include <linux/highmem.h> #include <linux/syscalls.h> @@ -77,7 +77,7 @@ int kexec_should_crash(struct task_struct *p) * * The code for the transition from the current kernel to the * the new kernel is placed in the control_code_buffer, whose size - * is given by KEXEC_CONTROL_CODE_SIZE. In the best case only a single + * is given by KEXEC_CONTROL_PAGE_SIZE. In the best case only a single * page of memory is necessary, but some architectures require more. * Because this memory must be identity mapped in the transition from * virtual to physical addresses it must live in the range @@ -242,7 +242,7 @@ static int kimage_normal_alloc(struct kimage **rimage, unsigned long entry, */ result = -ENOMEM; image->control_code_page = kimage_alloc_control_pages(image, - get_order(KEXEC_CONTROL_CODE_SIZE)); + get_order(KEXEC_CONTROL_PAGE_SIZE)); if (!image->control_code_page) { printk(KERN_ERR "Could not allocate control_code_buffer\n"); goto out; @@ -317,7 +317,7 @@ static int kimage_crash_alloc(struct kimage **rimage, unsigned long entry, */ result = -ENOMEM; image->control_code_page = kimage_alloc_control_pages(image, - get_order(KEXEC_CONTROL_CODE_SIZE)); + get_order(KEXEC_CONTROL_PAGE_SIZE)); if (!image->control_code_page) { printk(KERN_ERR "Could not allocate control_code_buffer\n"); goto out; @@ -924,19 +924,14 @@ static int kimage_load_segment(struct kimage *image, */ struct kimage *kexec_image; struct kimage *kexec_crash_image; -/* - * A home grown binary mutex. - * Nothing can wait so this mutex is safe to use - * in interrupt context :) - */ -static int kexec_lock; + +static DEFINE_MUTEX(kexec_mutex); asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments, struct kexec_segment __user *segments, unsigned long flags) { struct kimage **dest_image, *image; - int locked; int result; /* We only trust the superuser with rebooting the system. */ @@ -972,8 +967,7 @@ asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments, * * KISS: always take the mutex. */ - locked = xchg(&kexec_lock, 1); - if (locked) + if (!mutex_trylock(&kexec_mutex)) return -EBUSY; dest_image = &kexec_image; @@ -1015,8 +1009,7 @@ asmlinkage long sys_kexec_load(unsigned long entry, unsigned long nr_segments, image = xchg(dest_image, image); out: - locked = xchg(&kexec_lock, 0); /* Release the mutex */ - BUG_ON(!locked); + mutex_unlock(&kexec_mutex); kimage_free(image); return result; @@ -1063,10 +1056,7 @@ asmlinkage long compat_sys_kexec_load(unsigned long entry, void crash_kexec(struct pt_regs *regs) { - int locked; - - - /* Take the kexec_lock here to prevent sys_kexec_load + /* Take the kexec_mutex here to prevent sys_kexec_load * running on one cpu from replacing the crash kernel * we are using after a panic on a different cpu. * @@ -1074,8 +1064,7 @@ void crash_kexec(struct pt_regs *regs) * of memory the xchg(&kexec_crash_image) would be * sufficient. But since I reuse the memory... */ - locked = xchg(&kexec_lock, 1); - if (!locked) { + if (mutex_trylock(&kexec_mutex)) { if (kexec_crash_image) { struct pt_regs fixed_regs; crash_setup_regs(&fixed_regs, regs); @@ -1083,8 +1072,7 @@ void crash_kexec(struct pt_regs *regs) machine_crash_shutdown(&fixed_regs); machine_kexec(kexec_crash_image); } - locked = xchg(&kexec_lock, 0); - BUG_ON(!locked); + mutex_unlock(&kexec_mutex); } } @@ -1426,25 +1414,23 @@ static int __init crash_save_vmcoreinfo_init(void) module_init(crash_save_vmcoreinfo_init) -/** - * kernel_kexec - reboot the system - * - * Move into place and start executing a preloaded standalone - * executable. If nothing was preloaded return an error. +/* + * Move into place and start executing a preloaded standalone + * executable. If nothing was preloaded return an error. */ int kernel_kexec(void) { int error = 0; - if (xchg(&kexec_lock, 1)) + if (!mutex_trylock(&kexec_mutex)) return -EBUSY; if (!kexec_image) { error = -EINVAL; goto Unlock; } - if (kexec_image->preserve_context) { #ifdef CONFIG_KEXEC_JUMP + if (kexec_image->preserve_context) { mutex_lock(&pm_mutex); pm_prepare_console(); error = freeze_processes(); @@ -1459,6 +1445,7 @@ int kernel_kexec(void) error = disable_nonboot_cpus(); if (error) goto Resume_devices; + device_pm_lock(); local_irq_disable(); /* At this point, device_suspend() has been called, * but *not* device_power_down(). We *must* @@ -1470,26 +1457,22 @@ int kernel_kexec(void) error = device_power_down(PMSG_FREEZE); if (error) goto Enable_irqs; - save_processor_state(); + } else #endif - } else { - blocking_notifier_call_chain(&reboot_notifier_list, - SYS_RESTART, NULL); - system_state = SYSTEM_RESTART; - device_shutdown(); - sysdev_shutdown(); + { + kernel_restart_prepare(NULL); printk(KERN_EMERG "Starting new kernel\n"); machine_shutdown(); } machine_kexec(kexec_image); - if (kexec_image->preserve_context) { #ifdef CONFIG_KEXEC_JUMP - restore_processor_state(); + if (kexec_image->preserve_context) { device_power_up(PMSG_RESTORE); Enable_irqs: local_irq_enable(); + device_pm_unlock(); enable_nonboot_cpus(); Resume_devices: device_resume(PMSG_RESTORE); @@ -1499,11 +1482,10 @@ int kernel_kexec(void) Restore_console: pm_restore_console(); mutex_unlock(&pm_mutex); -#endif } +#endif Unlock: - xchg(&kexec_lock, 0); - + mutex_unlock(&kexec_mutex); return error; } diff --git a/kernel/lockdep.c b/kernel/lockdep.c index 1aa91fd6b06..77fa776a2da 100644 --- a/kernel/lockdep.c +++ b/kernel/lockdep.c @@ -1759,11 +1759,10 @@ static void check_chain_key(struct task_struct *curr) hlock = curr->held_locks + i; if (chain_key != hlock->prev_chain_key) { debug_locks_off(); - printk("hm#1, depth: %u [%u], %016Lx != %016Lx\n", + WARN(1, "hm#1, depth: %u [%u], %016Lx != %016Lx\n", curr->lockdep_depth, i, (unsigned long long)chain_key, (unsigned long long)hlock->prev_chain_key); - WARN_ON(1); return; } id = hlock->class_idx - 1; @@ -1778,11 +1777,10 @@ static void check_chain_key(struct task_struct *curr) } if (chain_key != curr->curr_chain_key) { debug_locks_off(); - printk("hm#2, depth: %u [%u], %016Lx != %016Lx\n", + WARN(1, "hm#2, depth: %u [%u], %016Lx != %016Lx\n", curr->lockdep_depth, i, (unsigned long long)chain_key, (unsigned long long)curr->curr_chain_key); - WARN_ON(1); } #endif } diff --git a/kernel/lockdep_internals.h b/kernel/lockdep_internals.h index 55db193d366..56b196932c0 100644 --- a/kernel/lockdep_internals.h +++ b/kernel/lockdep_internals.h @@ -50,8 +50,21 @@ extern unsigned int nr_process_chains; extern unsigned int max_lockdep_depth; extern unsigned int max_recursion_depth; +#ifdef CONFIG_PROVE_LOCKING extern unsigned long lockdep_count_forward_deps(struct lock_class *); extern unsigned long lockdep_count_backward_deps(struct lock_class *); +#else +static inline unsigned long +lockdep_count_forward_deps(struct lock_class *class) +{ + return 0; +} +static inline unsigned long +lockdep_count_backward_deps(struct lock_class *class) +{ + return 0; +} +#endif #ifdef CONFIG_DEBUG_LOCKDEP /* diff --git a/kernel/lockdep_proc.c b/kernel/lockdep_proc.c index fa19aee604c..4b194d34d77 100644 --- a/kernel/lockdep_proc.c +++ b/kernel/lockdep_proc.c @@ -82,7 +82,6 @@ static void print_name(struct seq_file *m, struct lock_class *class) static int l_show(struct seq_file *m, void *v) { - unsigned long nr_forward_deps, nr_backward_deps; struct lock_class *class = v; struct lock_list *entry; char c1, c2, c3, c4; @@ -96,11 +95,10 @@ static int l_show(struct seq_file *m, void *v) #ifdef CONFIG_DEBUG_LOCKDEP seq_printf(m, " OPS:%8ld", class->ops); #endif - nr_forward_deps = lockdep_count_forward_deps(class); - seq_printf(m, " FD:%5ld", nr_forward_deps); - - nr_backward_deps = lockdep_count_backward_deps(class); - seq_printf(m, " BD:%5ld", nr_backward_deps); +#ifdef CONFIG_PROVE_LOCKING + seq_printf(m, " FD:%5ld", lockdep_count_forward_deps(class)); + seq_printf(m, " BD:%5ld", lockdep_count_backward_deps(class)); +#endif get_usage_chars(class, &c1, &c2, &c3, &c4); seq_printf(m, " %c%c%c%c", c1, c2, c3, c4); @@ -325,7 +323,9 @@ static int lockdep_stats_show(struct seq_file *m, void *v) if (class->usage_mask & LOCKF_ENABLED_HARDIRQS_READ) nr_hardirq_read_unsafe++; +#ifdef CONFIG_PROVE_LOCKING sum_forward_deps += lockdep_count_forward_deps(class); +#endif } #ifdef CONFIG_DEBUG_LOCKDEP DEBUG_LOCKS_WARN_ON(debug_atomic_read(&nr_unused_locks) != nr_unused); diff --git a/kernel/ptrace.c b/kernel/ptrace.c index 082b3fcb32a..356699a96d5 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -140,7 +140,7 @@ int __ptrace_may_access(struct task_struct *task, unsigned int mode) if (!dumpable && !capable(CAP_SYS_PTRACE)) return -EPERM; - return security_ptrace(current, task, mode); + return security_ptrace_may_access(task, mode); } bool ptrace_may_access(struct task_struct *task, unsigned int mode) @@ -499,8 +499,7 @@ repeat: goto repeat; } - ret = security_ptrace(current->parent, current, - PTRACE_MODE_ATTACH); + ret = security_ptrace_traceme(current->parent); /* * Set the ptrace bit in the process ptrace flags. diff --git a/kernel/sched.c b/kernel/sched.c index d601fb0406c..9a1ddb84e26 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -808,9 +808,9 @@ const_debug unsigned int sysctl_sched_nr_migrate = 32; /* * ratelimit for updating the group shares. - * default: 0.5ms + * default: 0.25ms */ -const_debug unsigned int sysctl_sched_shares_ratelimit = 500000; +unsigned int sysctl_sched_shares_ratelimit = 250000; /* * period over which we measure -rt task cpu usage in us. @@ -4669,6 +4669,52 @@ int __sched wait_for_completion_killable(struct completion *x) } EXPORT_SYMBOL(wait_for_completion_killable); +/** + * try_wait_for_completion - try to decrement a completion without blocking + * @x: completion structure + * + * Returns: 0 if a decrement cannot be done without blocking + * 1 if a decrement succeeded. + * + * If a completion is being used as a counting completion, + * attempt to decrement the counter without blocking. This + * enables us to avoid waiting if the resource the completion + * is protecting is not available. + */ +bool try_wait_for_completion(struct completion *x) +{ + int ret = 1; + + spin_lock_irq(&x->wait.lock); + if (!x->done) + ret = 0; + else + x->done--; + spin_unlock_irq(&x->wait.lock); + return ret; +} +EXPORT_SYMBOL(try_wait_for_completion); + +/** + * completion_done - Test to see if a completion has any waiters + * @x: completion structure + * + * Returns: 0 if there are waiters (wait_for_completion() in progress) + * 1 if there are no waiters. + * + */ +bool completion_done(struct completion *x) +{ + int ret = 1; + + spin_lock_irq(&x->wait.lock); + if (!x->done) + ret = 0; + spin_unlock_irq(&x->wait.lock); + return ret; +} +EXPORT_SYMBOL(completion_done); + static long __sched sleep_on_common(wait_queue_head_t *q, int state, long timeout) { @@ -5740,6 +5786,8 @@ static inline void sched_init_granularity(void) sysctl_sched_latency = limit; sysctl_sched_wakeup_granularity *= factor; + + sysctl_sched_shares_ratelimit *= factor; } #ifdef CONFIG_SMP @@ -8462,8 +8510,8 @@ struct task_group *sched_create_group(struct task_group *parent) WARN_ON(!parent); /* root should already exist */ tg->parent = parent; - list_add_rcu(&tg->siblings, &parent->children); INIT_LIST_HEAD(&tg->children); + list_add_rcu(&tg->siblings, &parent->children); spin_unlock_irqrestore(&task_group_lock, flags); return tg; diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 6163e4cf885..998ba54b454 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -298,7 +298,7 @@ static void __disable_runtime(struct rq *rq) struct rt_rq *iter = sched_rt_period_rt_rq(rt_b, i); s64 diff; - if (iter == rt_rq) + if (iter == rt_rq || iter->rt_runtime == RUNTIME_INF) continue; spin_lock(&iter->rt_runtime_lock); diff --git a/kernel/spinlock.c b/kernel/spinlock.c index 44baeea94ab..29ab20749dd 100644 --- a/kernel/spinlock.c +++ b/kernel/spinlock.c @@ -290,7 +290,6 @@ void __lockfunc _spin_lock_nested(spinlock_t *lock, int subclass) spin_acquire(&lock->dep_map, subclass, 0, _RET_IP_); LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock); } - EXPORT_SYMBOL(_spin_lock_nested); unsigned long __lockfunc _spin_lock_irqsave_nested(spinlock_t *lock, int subclass) @@ -312,7 +311,6 @@ unsigned long __lockfunc _spin_lock_irqsave_nested(spinlock_t *lock, int subclas #endif return flags; } - EXPORT_SYMBOL(_spin_lock_irqsave_nested); void __lockfunc _spin_lock_nest_lock(spinlock_t *lock, @@ -322,7 +320,6 @@ void __lockfunc _spin_lock_nest_lock(spinlock_t *lock, spin_acquire_nest(&lock->dep_map, 0, 0, nest_lock, _RET_IP_); LOCK_CONTENDED(lock, _raw_spin_trylock, _raw_spin_lock); } - EXPORT_SYMBOL(_spin_lock_nest_lock); #endif diff --git a/kernel/sys.c b/kernel/sys.c index c01858090a9..3dacb00a7f7 100644 --- a/kernel/sys.c +++ b/kernel/sys.c @@ -274,7 +274,7 @@ void emergency_restart(void) } EXPORT_SYMBOL_GPL(emergency_restart); -static void kernel_restart_prepare(char *cmd) +void kernel_restart_prepare(char *cmd) { blocking_notifier_call_chain(&reboot_notifier_list, SYS_RESTART, cmd); system_state = SYSTEM_RESTART; diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 800ac848554..8b5a7d304a5 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -693,6 +693,14 @@ config LATENCYTOP Enable this option if you want to use the LatencyTOP tool to find out which userspace is blocking on what kernel operations. +config SYSCTL_SYSCALL_CHECK + bool "Sysctl checks" + depends on SYSCTL_SYSCALL + ---help--- + sys_sysctl uses binary paths that have been found challenging + to properly maintain and use. This enables checks that help + you to keep things correct. + source kernel/trace/Kconfig config PROVIDE_OHCI1394_DMA_INIT diff --git a/mm/bootmem.c b/mm/bootmem.c index 4af15d0340a..e023c68b025 100644 --- a/mm/bootmem.c +++ b/mm/bootmem.c @@ -473,7 +473,7 @@ find_block: goto find_block; } - if (bdata->last_end_off && + if (bdata->last_end_off & (PAGE_SIZE - 1) && PFN_DOWN(bdata->last_end_off) + 1 == sidx) start_off = ALIGN(bdata->last_end_off, align); else diff --git a/mm/oom_kill.c b/mm/oom_kill.c index 8a5467ee626..64e5b4bcd96 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -26,6 +26,7 @@ #include <linux/module.h> #include <linux/notifier.h> #include <linux/memcontrol.h> +#include <linux/security.h> int sysctl_panic_on_oom; int sysctl_oom_kill_allocating_task; @@ -128,7 +129,8 @@ unsigned long badness(struct task_struct *p, unsigned long uptime) * Superuser processes are usually more important, so we make it * less likely that we kill those. */ - if (__capable(p, CAP_SYS_ADMIN) || __capable(p, CAP_SYS_RESOURCE)) + if (has_capability(p, CAP_SYS_ADMIN) || + has_capability(p, CAP_SYS_RESOURCE)) points /= 4; /* @@ -137,7 +139,7 @@ unsigned long badness(struct task_struct *p, unsigned long uptime) * tend to only have this flag set on applications they think * of as important. */ - if (__capable(p, CAP_SYS_RAWIO)) + if (has_capability(p, CAP_SYS_RAWIO)) points /= 4; /* diff --git a/security/capability.c b/security/capability.c index 63d10da515a..24587481903 100644 --- a/security/capability.c +++ b/security/capability.c @@ -811,7 +811,8 @@ struct security_operations default_security_ops = { void security_fixup_ops(struct security_operations *ops) { - set_to_cap_if_null(ops, ptrace); + set_to_cap_if_null(ops, ptrace_may_access); + set_to_cap_if_null(ops, ptrace_traceme); set_to_cap_if_null(ops, capget); set_to_cap_if_null(ops, capset_check); set_to_cap_if_null(ops, capset_set); diff --git a/security/commoncap.c b/security/commoncap.c index 4afbece37a0..e4c4b3fc0c0 100644 --- a/security/commoncap.c +++ b/security/commoncap.c @@ -63,14 +63,24 @@ int cap_settime(struct timespec *ts, struct timezone *tz) return 0; } -int cap_ptrace (struct task_struct *parent, struct task_struct *child, - unsigned int mode) +int cap_ptrace_may_access(struct task_struct *child, unsigned int mode) { /* Derived from arch/i386/kernel/ptrace.c:sys_ptrace. */ - if (!cap_issubset(child->cap_permitted, parent->cap_permitted) && - !__capable(parent, CAP_SYS_PTRACE)) - return -EPERM; - return 0; + if (cap_issubset(child->cap_permitted, current->cap_permitted)) + return 0; + if (capable(CAP_SYS_PTRACE)) + return 0; + return -EPERM; +} + +int cap_ptrace_traceme(struct task_struct *parent) +{ + /* Derived from arch/i386/kernel/ptrace.c:sys_ptrace. */ + if (cap_issubset(current->cap_permitted, parent->cap_permitted)) + return 0; + if (has_capability(parent, CAP_SYS_PTRACE)) + return 0; + return -EPERM; } int cap_capget (struct task_struct *target, kernel_cap_t *effective, @@ -534,7 +544,7 @@ int cap_task_post_setuid (uid_t old_ruid, uid_t old_euid, uid_t old_suid, static inline int cap_safe_nice(struct task_struct *p) { if (!cap_issubset(p->cap_permitted, current->cap_permitted) && - !__capable(current, CAP_SYS_NICE)) + !capable(CAP_SYS_NICE)) return -EPERM; return 0; } diff --git a/security/root_plug.c b/security/root_plug.c index be0ebec2580..c3f68b5b372 100644 --- a/security/root_plug.c +++ b/security/root_plug.c @@ -72,7 +72,8 @@ static int rootplug_bprm_check_security (struct linux_binprm *bprm) static struct security_operations rootplug_security_ops = { /* Use the capability functions for some of the hooks */ - .ptrace = cap_ptrace, + .ptrace_may_access = cap_ptrace_may_access, + .ptrace_traceme = cap_ptrace_traceme, .capget = cap_capget, .capset_check = cap_capset_check, .capset_set = cap_capset_set, diff --git a/security/security.c b/security/security.c index ff706872775..3a4b4f55b33 100644 --- a/security/security.c +++ b/security/security.c @@ -127,10 +127,14 @@ int register_security(struct security_operations *ops) /* Security operations */ -int security_ptrace(struct task_struct *parent, struct task_struct *child, - unsigned int mode) +int security_ptrace_may_access(struct task_struct *child, unsigned int mode) { - return security_ops->ptrace(parent, child, mode); + return security_ops->ptrace_may_access(child, mode); +} + +int security_ptrace_traceme(struct task_struct *parent) +{ + return security_ops->ptrace_traceme(parent); } int security_capget(struct task_struct *target, diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index 3ae9bec5a50..03fc6a81ae3 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -1738,24 +1738,34 @@ static inline u32 file_to_av(struct file *file) /* Hook functions begin here. */ -static int selinux_ptrace(struct task_struct *parent, - struct task_struct *child, - unsigned int mode) +static int selinux_ptrace_may_access(struct task_struct *child, + unsigned int mode) { int rc; - rc = secondary_ops->ptrace(parent, child, mode); + rc = secondary_ops->ptrace_may_access(child, mode); if (rc) return rc; if (mode == PTRACE_MODE_READ) { - struct task_security_struct *tsec = parent->security; + struct task_security_struct *tsec = current->security; struct task_security_struct *csec = child->security; return avc_has_perm(tsec->sid, csec->sid, SECCLASS_FILE, FILE__READ, NULL); } - return task_has_perm(parent, child, PROCESS__PTRACE); + return task_has_perm(current, child, PROCESS__PTRACE); +} + +static int selinux_ptrace_traceme(struct task_struct *parent) +{ + int rc; + + rc = secondary_ops->ptrace_traceme(parent); + if (rc) + return rc; + + return task_has_perm(parent, current, PROCESS__PTRACE); } static int selinux_capget(struct task_struct *target, kernel_cap_t *effective, @@ -5346,7 +5356,8 @@ static int selinux_key_getsecurity(struct key *key, char **_buffer) static struct security_operations selinux_ops = { .name = "selinux", - .ptrace = selinux_ptrace, + .ptrace_may_access = selinux_ptrace_may_access, + .ptrace_traceme = selinux_ptrace_traceme, .capget = selinux_capget, .capset_check = selinux_capset_check, .capset_set = selinux_capset_set, diff --git a/security/smack/smack_lsm.c b/security/smack/smack_lsm.c index 1b40e558f98..87d75417ea9 100644 --- a/security/smack/smack_lsm.c +++ b/security/smack/smack_lsm.c @@ -87,27 +87,46 @@ struct inode_smack *new_inode_smack(char *smack) */ /** - * smack_ptrace - Smack approval on ptrace - * @ptp: parent task pointer + * smack_ptrace_may_access - Smack approval on PTRACE_ATTACH * @ctp: child task pointer * * Returns 0 if access is OK, an error code otherwise * * Do the capability checks, and require read and write. */ -static int smack_ptrace(struct task_struct *ptp, struct task_struct *ctp, - unsigned int mode) +static int smack_ptrace_may_access(struct task_struct *ctp, unsigned int mode) { int rc; - rc = cap_ptrace(ptp, ctp, mode); + rc = cap_ptrace_may_access(ctp, mode); if (rc != 0) return rc; - rc = smk_access(ptp->security, ctp->security, MAY_READWRITE); - if (rc != 0 && __capable(ptp, CAP_MAC_OVERRIDE)) + rc = smk_access(current->security, ctp->security, MAY_READWRITE); + if (rc != 0 && capable(CAP_MAC_OVERRIDE)) return 0; + return rc; +} + +/** + * smack_ptrace_traceme - Smack approval on PTRACE_TRACEME + * @ptp: parent task pointer + * + * Returns 0 if access is OK, an error code otherwise + * + * Do the capability checks, and require read and write. + */ +static int smack_ptrace_traceme(struct task_struct *ptp) +{ + int rc; + + rc = cap_ptrace_traceme(ptp); + if (rc != 0) + return rc; + rc = smk_access(ptp->security, current->security, MAY_READWRITE); + if (rc != 0 && has_capability(ptp, CAP_MAC_OVERRIDE)) + return 0; return rc; } @@ -923,7 +942,7 @@ static int smack_file_send_sigiotask(struct task_struct *tsk, */ file = container_of(fown, struct file, f_owner); rc = smk_access(file->f_security, tsk->security, MAY_WRITE); - if (rc != 0 && __capable(tsk, CAP_MAC_OVERRIDE)) + if (rc != 0 && has_capability(tsk, CAP_MAC_OVERRIDE)) return 0; return rc; } @@ -1164,12 +1183,12 @@ static int smack_task_wait(struct task_struct *p) * account for the smack labels having gotten to * be different in the first place. * - * This breaks the strict subjet/object access + * This breaks the strict subject/object access * control ideal, taking the object's privilege * state into account in the decision as well as * the smack value. */ - if (capable(CAP_MAC_OVERRIDE) || __capable(p, CAP_MAC_OVERRIDE)) + if (capable(CAP_MAC_OVERRIDE) || has_capability(p, CAP_MAC_OVERRIDE)) return 0; return rc; @@ -2016,9 +2035,6 @@ static int smack_setprocattr(struct task_struct *p, char *name, { char *newsmack; - if (!__capable(p, CAP_MAC_ADMIN)) - return -EPERM; - /* * Changing another process' Smack value is too dangerous * and supports no sane use case. @@ -2026,6 +2042,9 @@ static int smack_setprocattr(struct task_struct *p, char *name, if (p != current) return -EPERM; + if (!capable(CAP_MAC_ADMIN)) + return -EPERM; + if (value == NULL || size == 0 || size >= SMK_LABELLEN) return -EINVAL; @@ -2552,7 +2571,8 @@ static void smack_release_secctx(char *secdata, u32 seclen) struct security_operations smack_ops = { .name = "smack", - .ptrace = smack_ptrace, + .ptrace_may_access = smack_ptrace_may_access, + .ptrace_traceme = smack_ptrace_traceme, .capget = cap_capget, .capset_check = cap_capset_check, .capset_set = cap_capset_set, @@ -2729,4 +2749,3 @@ static __init int smack_init(void) * all processes and objects when they are created. */ security_initcall(smack_init); - diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index f7d95b224a9..31f52d3fc21 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -845,7 +845,7 @@ config SND_VIRTUOSO select SND_OXYGEN_LIB help Say Y here to include support for sound cards based on the - Asus AV100/AV200 chips, i.e., Xonar D2, DX and D2X. + Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2 and D2X. To compile this driver as a module, choose M here: the module will be called snd-virtuoso. diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c index 9a2c16bf94e..01d7b75f918 100644 --- a/sound/pci/oxygen/virtuoso.c +++ b/sound/pci/oxygen/virtuoso.c @@ -36,15 +36,15 @@ */ /* - * Xonar DX - * -------- + * Xonar D1/DX + * ----------- * * CMI8788: * * I²C <-> CS4398 (front) * <-> CS4362A (surround, center/LFE, back) * - * GPI 0 <- external power present + * GPI 0 <- external power present (DX only) * * GPIO 0 -> enable output to speakers * GPIO 1 -> enable front panel I/O @@ -96,6 +96,7 @@ MODULE_PARM_DESC(enable, "enable card"); enum { MODEL_D2, MODEL_D2X, + MODEL_D1, MODEL_DX, }; @@ -103,6 +104,7 @@ static struct pci_device_id xonar_ids[] __devinitdata = { { OXYGEN_PCI_SUBID(0x1043, 0x8269), .driver_data = MODEL_D2 }, { OXYGEN_PCI_SUBID(0x1043, 0x8275), .driver_data = MODEL_DX }, { OXYGEN_PCI_SUBID(0x1043, 0x82b7), .driver_data = MODEL_D2X }, + { OXYGEN_PCI_SUBID(0x1043, 0x834f), .driver_data = MODEL_D1 }, { } }; MODULE_DEVICE_TABLE(pci, xonar_ids); @@ -313,15 +315,12 @@ static void cs43xx_init(struct oxygen *chip) cs4362a_write(chip, 0x01, CS4362A_CPEN); } -static void xonar_dx_init(struct oxygen *chip) +static void xonar_d1_init(struct oxygen *chip) { struct xonar_data *data = chip->model_data; data->anti_pop_delay = 800; data->output_enable_bit = GPIO_DX_OUTPUT_ENABLE; - data->ext_power_reg = OXYGEN_GPI_DATA; - data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK; - data->ext_power_bit = GPI_DX_EXT_POWER; data->cs4398_fm = CS4398_FM_SINGLE | CS4398_DEM_NONE | CS4398_DIF_LJUST; data->cs4362a_fm = CS4362A_FM_SINGLE | CS4362A_ATAPI_B_R | CS4362A_ATAPI_A_L; @@ -345,6 +344,16 @@ static void xonar_dx_init(struct oxygen *chip) snd_component_add(chip->card, "CS5361"); } +static void xonar_dx_init(struct oxygen *chip) +{ + struct xonar_data *data = chip->model_data; + + data->ext_power_reg = OXYGEN_GPI_DATA; + data->ext_power_int_reg = OXYGEN_GPI_INTERRUPT_MASK; + data->ext_power_bit = GPI_DX_EXT_POWER; + xonar_d1_init(chip); +} + static void xonar_cleanup(struct oxygen *chip) { struct xonar_data *data = chip->model_data; @@ -352,7 +361,7 @@ static void xonar_cleanup(struct oxygen *chip) oxygen_clear_bits16(chip, OXYGEN_GPIO_DATA, data->output_enable_bit); } -static void xonar_dx_cleanup(struct oxygen *chip) +static void xonar_d1_cleanup(struct oxygen *chip) { xonar_cleanup(chip); cs4362a_write(chip, 0x01, CS4362A_PDN | CS4362A_CPEN); @@ -365,7 +374,7 @@ static void xonar_d2_resume(struct oxygen *chip) xonar_enable_output(chip); } -static void xonar_dx_resume(struct oxygen *chip) +static void xonar_d1_resume(struct oxygen *chip) { cs43xx_init(chip); xonar_enable_output(chip); @@ -513,7 +522,7 @@ static const struct snd_kcontrol_new front_panel_switch = { .put = front_panel_put, }; -static void xonar_dx_ac97_switch(struct oxygen *chip, +static void xonar_d1_ac97_switch(struct oxygen *chip, unsigned int reg, unsigned int mute) { if (reg == AC97_LINE) { @@ -536,7 +545,7 @@ static int xonar_d2_control_filter(struct snd_kcontrol_new *template) return 0; } -static int xonar_dx_control_filter(struct snd_kcontrol_new *template) +static int xonar_d1_control_filter(struct snd_kcontrol_new *template) { if (!strncmp(template->name, "CD Capture ", 11)) return 1; /* no CD input */ @@ -548,7 +557,7 @@ static int xonar_mixer_init(struct oxygen *chip) return snd_ctl_add(chip->card, snd_ctl_new1(&alt_switch, chip)); } -static int xonar_dx_mixer_init(struct oxygen *chip) +static int xonar_d1_mixer_init(struct oxygen *chip) { return snd_ctl_add(chip->card, snd_ctl_new1(&front_panel_switch, chip)); } @@ -615,23 +624,51 @@ static const struct oxygen_model xonar_models[] = { .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST, .adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST, }, + [MODEL_D1] = { + .shortname = "Xonar D1", + .longname = "Asus Virtuoso 100", + .chip = "AV200", + .owner = THIS_MODULE, + .init = xonar_d1_init, + .control_filter = xonar_d1_control_filter, + .mixer_init = xonar_d1_mixer_init, + .cleanup = xonar_d1_cleanup, + .suspend = xonar_d1_cleanup, + .resume = xonar_d1_resume, + .set_dac_params = set_cs43xx_params, + .set_adc_params = set_cs53x1_params, + .update_dac_volume = update_cs43xx_volume, + .update_dac_mute = update_cs43xx_mute, + .ac97_switch = xonar_d1_ac97_switch, + .dac_tlv = cs4362a_db_scale, + .model_data_size = sizeof(struct xonar_data), + .pcm_dev_cfg = PLAYBACK_0_TO_I2S | + PLAYBACK_1_TO_SPDIF | + CAPTURE_0_FROM_I2S_2, + .dac_channels = 8, + .dac_volume_min = 0, + .dac_volume_max = 127, + .function_flags = OXYGEN_FUNCTION_2WIRE, + .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST, + .adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST, + }, [MODEL_DX] = { .shortname = "Xonar DX", .longname = "Asus Virtuoso 100", .chip = "AV200", .owner = THIS_MODULE, .init = xonar_dx_init, - .control_filter = xonar_dx_control_filter, - .mixer_init = xonar_dx_mixer_init, - .cleanup = xonar_dx_cleanup, - .suspend = xonar_dx_cleanup, - .resume = xonar_dx_resume, + .control_filter = xonar_d1_control_filter, + .mixer_init = xonar_d1_mixer_init, + .cleanup = xonar_d1_cleanup, + .suspend = xonar_d1_cleanup, + .resume = xonar_d1_resume, .set_dac_params = set_cs43xx_params, .set_adc_params = set_cs53x1_params, .update_dac_volume = update_cs43xx_volume, .update_dac_mute = update_cs43xx_mute, .gpio_changed = xonar_gpio_changed, - .ac97_switch = xonar_dx_ac97_switch, + .ac97_switch = xonar_d1_ac97_switch, .dac_tlv = cs4362a_db_scale, .model_data_size = sizeof(struct xonar_data), .pcm_dev_cfg = PLAYBACK_0_TO_I2S | diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c index 3ecce5168e9..e44153fa38d 100644 --- a/sound/soc/codecs/wm8990.c +++ b/sound/soc/codecs/wm8990.c @@ -82,7 +82,7 @@ static const u16 wm8990_reg[] = { 0x0003, /* R35 - ClassD1 */ 0x0000, /* R36 */ 0x0100, /* R37 - ClassD3 */ - 0x0000, /* R38 */ + 0x0079, /* R38 - ClassD4 */ 0x0000, /* R39 - Input Mixer1 */ 0x0000, /* R40 - Input Mixer2 */ 0x0000, /* R41 - Input Mixer3 */ @@ -311,11 +311,15 @@ SOC_SINGLE("Speaker Mode Switch", WM8990_CLASSD1, WM8990_CDMODE_BIT, 1, 0), SOC_SINGLE("Speaker Output Attenuation Volume", WM8990_SPEAKER_VOLUME, - WM8990_SPKVOL_SHIFT, WM8990_SPKVOL_MASK, 0), + WM8990_SPKATTN_SHIFT, WM8990_SPKATTN_MASK, 0), SOC_SINGLE("Speaker DC Boost Volume", WM8990_CLASSD3, WM8990_DCGAIN_SHIFT, WM8990_DCGAIN_MASK, 0), SOC_SINGLE("Speaker AC Boost Volume", WM8990_CLASSD3, WM8990_ACGAIN_SHIFT, WM8990_ACGAIN_MASK, 0), +SOC_SINGLE_TLV("Speaker Volume", WM8990_CLASSD4, + WM8990_SPKVOL_SHIFT, WM8990_SPKVOL_MASK, 0, out_pga_tlv), +SOC_SINGLE("Speaker ZC Switch", WM8990_CLASSD4, + WM8990_SPKZC_SHIFT, WM8990_SPKZC_MASK, 0), SOC_WM899X_OUTPGA_SINGLE_R_TLV("Left DAC Digital Volume", WM8990_LEFT_DAC_DIGITAL_VOLUME, @@ -920,7 +924,7 @@ static const struct snd_soc_dapm_route audio_map[] = { {"SPKMIX", "SPKMIX Left Mixer PGA Switch", "LOPGA"}, {"SPKMIX", "SPKMIX Right Mixer PGA Switch", "ROPGA"}, {"SPKMIX", "SPKMIX Right DAC Switch", "Right DAC"}, - {"SPKMIX", "SPKMIX Left DAC Switch", "Right DAC"}, + {"SPKMIX", "SPKMIX Left DAC Switch", "Left DAC"}, /* LONMIX */ {"LONMIX", "LONMIX Left Mixer PGA Switch", "LOPGA"}, diff --git a/sound/soc/codecs/wm8990.h b/sound/soc/codecs/wm8990.h index 6bea5748528..0a08325d544 100644 --- a/sound/soc/codecs/wm8990.h +++ b/sound/soc/codecs/wm8990.h @@ -54,6 +54,7 @@ #define WM8990_SPEAKER_VOLUME 0x22 #define WM8990_CLASSD1 0x23 #define WM8990_CLASSD3 0x25 +#define WM8990_CLASSD4 0x26 #define WM8990_INPUT_MIXER1 0x27 #define WM8990_INPUT_MIXER2 0x28 #define WM8990_INPUT_MIXER3 0x29 @@ -528,8 +529,8 @@ /* * R34 (0x22) - Speaker Volume */ -#define WM8990_SPKVOL_MASK 0x0003 /* SPKVOL - [1:0] */ -#define WM8990_SPKVOL_SHIFT 0 +#define WM8990_SPKATTN_MASK 0x0003 /* SPKATTN - [1:0] */ +#define WM8990_SPKATTN_SHIFT 0 /* * R35 (0x23) - ClassD1 @@ -544,6 +545,15 @@ #define WM8990_DCGAIN_SHIFT 3 #define WM8990_ACGAIN_MASK 0x0007 /* ACGAIN - [2:0] */ #define WM8990_ACGAIN_SHIFT 0 + +/* + * R38 (0x26) - ClassD4 + */ +#define WM8990_SPKZC_MASK 0x0001 /* SPKZC */ +#define WM8990_SPKZC_SHIFT 7 /* SPKZC */ +#define WM8990_SPKVOL_MASK 0x007F /* SPKVOL - [6:0] */ +#define WM8990_SPKVOL_SHIFT 0 /* SPKVOL - [6:0] */ + /* * R39 (0x27) - Input Mixer1 */ |