aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/boot/compressed/head.S2
-rw-r--r--arch/arm/include/asm/fiq.h5
-rw-r--r--arch/arm/kernel/fiq.c79
-rw-r--r--arch/arm/mach-s3c2410/include/mach/gpio.h5
-rw-r--r--arch/arm/mach-s3c2410/include/mach/irqs.h22
-rw-r--r--arch/arm/mach-s3c2410/include/mach/ts.h35
-rw-r--r--arch/arm/mach-s3c2442/Kconfig5
-rw-r--r--arch/arm/mach-s3c2442/Makefile8
-rw-r--r--arch/arm/mach-s3c2442/gta02-fiq.c135
-rw-r--r--arch/arm/mach-s3c2442/gta02-pm-bt.c257
-rw-r--r--arch/arm/mach-s3c2442/gta02-pm-gps.c246
-rw-r--r--arch/arm/mach-s3c2442/gta02-pm-gsm.c303
-rw-r--r--arch/arm/mach-s3c2442/gta02-pm-wlan.c201
-rw-r--r--arch/arm/mach-s3c2442/include/mach/gta02-fiq.h9
-rw-r--r--arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h1
-rw-r--r--arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h10
-rw-r--r--arch/arm/mach-s3c2442/include/mach/gta02.h6
-rw-r--r--arch/arm/mach-s3c2442/mach-gta02.c741
-rw-r--r--arch/arm/plat-s3c/include/plat/devs.h2
-rw-r--r--arch/arm/plat-s3c/include/plat/nand.h1
-rw-r--r--arch/arm/plat-s3c/include/plat/uncompress.h19
-rw-r--r--arch/arm/plat-s3c/pwm.c72
-rw-r--r--arch/arm/plat-s3c24xx/adc.c58
-rw-r--r--arch/arm/plat-s3c24xx/devs.c20
-rw-r--r--arch/arm/plat-s3c24xx/gpiolib.c13
-rw-r--r--arch/arm/plat-s3c24xx/include/plat/irq.h21
-rw-r--r--arch/arm/plat-s3c24xx/irq.c48
-rw-r--r--drivers/input/misc/pcf50633-input.c7
-rw-r--r--drivers/input/touchscreen/Kconfig63
-rw-r--r--drivers/input/touchscreen/Makefile6
-rw-r--r--drivers/input/touchscreen/s3c2410_ts.c552
-rw-r--r--drivers/input/touchscreen/ts_filter_chain.c183
-rw-r--r--drivers/input/touchscreen/ts_filter_group.c330
-rw-r--r--drivers/input/touchscreen/ts_filter_linear.c212
-rw-r--r--drivers/input/touchscreen/ts_filter_mean.c174
-rw-r--r--drivers/input/touchscreen/ts_filter_median.c261
-rw-r--r--drivers/mfd/Kconfig2
-rw-r--r--drivers/mfd/Makefile1
-rw-r--r--drivers/mfd/glamo/Kconfig42
-rw-r--r--drivers/mfd/glamo/Makefile11
-rw-r--r--drivers/mfd/glamo/glamo-core.c1284
-rw-r--r--drivers/mfd/glamo/glamo-core.h60
-rw-r--r--drivers/mfd/glamo/glamo-fb.c981
-rw-r--r--drivers/mfd/glamo/glamo-gpio.c284
-rw-r--r--drivers/mfd/glamo/glamo-mci.c1025
-rw-r--r--drivers/mfd/glamo/glamo-regs.h630
-rw-r--r--drivers/mfd/pcf50633-adc.c5
-rw-r--r--drivers/mfd/pcf50633-core.c91
-rw-r--r--drivers/mtd/nand/s3c2410.c2
-rw-r--r--drivers/power/Kconfig18
-rw-r--r--drivers/power/Makefile4
-rw-r--r--drivers/power/bq27000_battery.c477
-rw-r--r--drivers/power/hdq.c515
-rw-r--r--drivers/power/pcf50633-charger.c226
-rw-r--r--drivers/power/platform_battery.c119
-rw-r--r--drivers/regulator/pcf50633-regulator.c5
-rw-r--r--drivers/rtc/rtc-pcf50633.c10
-rw-r--r--drivers/serial/samsung.c19
-rw-r--r--drivers/usb/gadget/s3c2410_udc.c3
-rw-r--r--drivers/video/backlight/Kconfig20
-rw-r--r--drivers/video/backlight/Makefile2
-rw-r--r--drivers/video/backlight/jbt6k74.c896
-rw-r--r--drivers/video/backlight/pcf50633-backlight.c185
-rw-r--r--include/linux/bq27000_battery.h16
-rw-r--r--include/linux/fb.h1
-rw-r--r--include/linux/glamofb.h35
-rw-r--r--include/linux/hdq.h32
-rw-r--r--include/linux/input/touchscreen/ts_filter.h74
-rw-r--r--include/linux/input/touchscreen/ts_filter_chain.h58
-rw-r--r--include/linux/input/touchscreen/ts_filter_group.h36
-rw-r--r--include/linux/input/touchscreen/ts_filter_linear.h31
-rw-r--r--include/linux/input/touchscreen/ts_filter_mean.h28
-rw-r--r--include/linux/input/touchscreen/ts_filter_median.h32
-rw-r--r--include/linux/jbt6k74.h21
-rw-r--r--include/linux/mfd/glamo.h52
-rw-r--r--include/linux/mfd/pcf50633/backlight.h44
-rw-r--r--include/linux/mfd/pcf50633/core.h14
-rw-r--r--include/linux/mfd/pcf50633/mbc.h1
-rw-r--r--include/linux/platform_battery.h12
-rw-r--r--sound/soc/s3c24xx/Kconfig17
-rw-r--r--sound/soc/s3c24xx/Makefile2
-rw-r--r--sound/soc/s3c24xx/neo1973_gta02_wm8753.c498
-rw-r--r--sound/soc/s3c24xx/neo1973_wm8753.c757
83 files changed, 11693 insertions, 1097 deletions
diff --git a/arch/arm/boot/compressed/head.S b/arch/arm/boot/compressed/head.S
index fa6fbf45cf3..4f0708b83ed 100644
--- a/arch/arm/boot/compressed/head.S
+++ b/arch/arm/boot/compressed/head.S
@@ -58,7 +58,7 @@
add \rb, \rb, #0x00010000 @ Ser1
#endif
.endm
-#elif defined(CONFIG_ARCH_S3C2410)
+#elif defined(CONFIG_ARCH_S3C2410) && CONFIG_S3C_LOWLEVEL_UART_PORT >= 0
.macro loadsp, rb
mov \rb, #0x50000000
add \rb, \rb, #0x4000 * CONFIG_S3C_LOWLEVEL_UART_PORT
diff --git a/arch/arm/include/asm/fiq.h b/arch/arm/include/asm/fiq.h
index 2242ce22ec6..7ade2b8445d 100644
--- a/arch/arm/include/asm/fiq.h
+++ b/arch/arm/include/asm/fiq.h
@@ -29,8 +29,9 @@ struct fiq_handler {
extern int claim_fiq(struct fiq_handler *f);
extern void release_fiq(struct fiq_handler *f);
extern void set_fiq_handler(void *start, unsigned int length);
-extern void set_fiq_regs(struct pt_regs *regs);
-extern void get_fiq_regs(struct pt_regs *regs);
+extern void set_fiq_c_handler(void (*handler)(void));
+extern void __attribute__((naked)) set_fiq_regs(struct pt_regs *regs);
+extern void __attribute__((naked)) get_fiq_regs(struct pt_regs *regs);
extern void enable_fiq(int fiq);
extern void disable_fiq(int fiq);
diff --git a/arch/arm/kernel/fiq.c b/arch/arm/kernel/fiq.c
index 6ff7919613d..c07691ef4c0 100644
--- a/arch/arm/kernel/fiq.c
+++ b/arch/arm/kernel/fiq.c
@@ -8,6 +8,8 @@
*
* FIQ support re-written by Russell King to be more generic
*
+ * FIQ handler in C supoprt written by Andy Green <andy@openmoko.com>
+ *
* We now properly support a method by which the FIQ handlers can
* be stacked onto the vector. We still do not support sharing
* the FIQ vector itself.
@@ -124,6 +126,83 @@ void __naked get_fiq_regs(struct pt_regs *regs)
: "r" (&regs->ARM_r8), "I" (PSR_I_BIT | PSR_F_BIT | FIQ_MODE));
}
+/* -------- FIQ handler in C ---------
+ *
+ * Major Caveats for using this
+ * ---------------------------
+ * *
+ * * 1) it CANNOT touch any vmalloc()'d memory, only memory
+ * that was kmalloc()'d. Static allocations in the monolithic kernel
+ * are kmalloc()'d so they are okay. You can touch memory-mapped IO, but
+ * the pointer for it has to have been stored in kmalloc'd memory. The
+ * reason for this is simple: every now and then Linux turns off interrupts
+ * and reorders the paging tables. If a FIQ happens during this time, the
+ * virtual memory space can be partly or entirely disordered or missing.
+ *
+ * 2) Because vmalloc() is used when a module is inserted, THIS FIQ
+ * ISR HAS TO BE IN THE MONOLITHIC KERNEL, not a module. But the way
+ * it is set up, you can all to enable and disable it from your module
+ * and intercommunicate with it through struct fiq_ipc
+ * fiq_ipc which you can define in
+ * asm/archfiq_ipc_type.h. The reason is the same as above, a
+ * FIQ could happen while even the ISR is not present in virtual memory
+ * space due to pagetables being changed at the time.
+ *
+ * 3) You can't call any Linux API code except simple macros
+ * - understand that FIQ can come in at any time, no matter what
+ * state of undress the kernel may privately be in, thinking it
+ * locked the door by turning off interrupts... FIQ is an
+ * unstoppable monster force (which is its value)
+ * - they are not vmalloc()'d memory safe
+ * - they might do crazy stuff like sleep: FIQ pisses fire and
+ * is not interested in 'sleep' that the weak seem to need
+ * - calling APIs from FIQ can re-enter un-renterable things
+ * - summary: you cannot interoperate with linux APIs directly in the FIQ ISR
+ *
+ * If you follow these rules, it is fantastic, an extremely powerful, solid,
+ * genuine hard realtime feature.
+ */
+
+static void (*current_fiq_c_isr)(void);
+#define FIQ_C_ISR_STACK_SIZE 256
+
+static void __attribute__((naked)) __jump_to_isr(void)
+{
+ asm __volatile__ ("mov pc, r8");
+}
+
+
+static void __attribute__((naked)) __actual_isr(void)
+{
+ asm __volatile__ (
+ "stmdb sp!, {r0-r12, lr};"
+ "mov fp, sp;"
+ );
+
+ current_fiq_c_isr();
+
+ asm __volatile__ (
+ "ldmia sp!, {r0-r12, lr};"
+ "subs pc, lr, #4;"
+ );
+}
+
+void set_fiq_c_handler(void (*isr)(void))
+{
+ struct pt_regs regs;
+
+ memset(&regs, 0, sizeof(regs));
+ regs.ARM_r8 = (unsigned long) __actual_isr;
+ regs.ARM_sp = 0xffff001c + FIQ_C_ISR_STACK_SIZE;
+
+ set_fiq_handler(__jump_to_isr, 4);
+
+ current_fiq_c_isr = isr;
+
+ set_fiq_regs(&regs);
+}
+/* -------- FIQ handler in C ---------*/
+
int claim_fiq(struct fiq_handler *f)
{
int ret = 0;
diff --git a/arch/arm/mach-s3c2410/include/mach/gpio.h b/arch/arm/mach-s3c2410/include/mach/gpio.h
index 15f0b3e7ce6..0b53cad80fe 100644
--- a/arch/arm/mach-s3c2410/include/mach/gpio.h
+++ b/arch/arm/mach-s3c2410/include/mach/gpio.h
@@ -20,10 +20,11 @@
* devices that need GPIO.
*/
-#define ARCH_NR_GPIOS (256 + CONFIG_S3C24XX_GPIO_EXTRA)
+#define ARCH_NR_GPIOS (512 + CONFIG_S3C24XX_GPIO_EXTRA)
#include <asm-generic/gpio.h>
#include <mach/gpio-nrs.h>
#include <mach/gpio-fns.h>
+#include <mach/regs-gpioj.h>
-#define S3C_GPIO_END (S3C2410_GPIO_BANKH + 32)
+#define S3C_GPIO_END (S3C2440_GPIO_BANKJ + 32)
diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h
index 6c12c6312ad..6986d02fd4d 100644
--- a/arch/arm/mach-s3c2410/include/mach/irqs.h
+++ b/arch/arm/mach-s3c2410/include/mach/irqs.h
@@ -153,9 +153,9 @@
#define IRQ_S3C2443_AC97 S3C2410_IRQSUB(28)
#ifdef CONFIG_CPU_S3C2443
-#define NR_IRQS (IRQ_S3C2443_AC97+1)
+#define S3C2410_NR_INTERNAL_IRQS (IRQ_S3C2443_AC97+1)
#else
-#define NR_IRQS (IRQ_S3C2440_AC97+1)
+#define S3C2410_NR_INTERNAL_IRQS (IRQ_S3C2440_AC97+1)
#endif
/* compatibility define. */
@@ -173,4 +173,22 @@
/* Our FIQs are routable from IRQ_EINT0 to IRQ_ADCPARENT */
#define FIQ_START IRQ_EINT0
+/* Board specific IRQs
+ * If your board needs a extra set of IRQ numbers add it to the list here.
+ * Make sure that the numbers are kept in descending, so if multiple boards are
+ * selected the maximum will be used and there are enough IRQ numbers available
+ * for each board.
+ */
+
+#if defined(CONFIG_MACH_NEO1973_GTA02)
+#define S3C2410_NR_BOARD_IRQS 9
+#else
+#define S3C2410_NR_BOARD_IRQS 0
+#endif
+
+#define S3C2410_BOARD_IRQ_START S3C2410_NR_INTERNAL_IRQS
+#define S3C2410_BOARD_IRQ_END (S3C2410_BOARD_IRQ_START + S3C2410_NR_BOARD_IRQS)
+
+#define NR_IRQS S3C2410_BOARD_IRQ_END
+
#endif /* __ASM_ARCH_IRQ_H */
diff --git a/arch/arm/mach-s3c2410/include/mach/ts.h b/arch/arm/mach-s3c2410/include/mach/ts.h
new file mode 100644
index 00000000000..ac0c727d155
--- /dev/null
+++ b/arch/arm/mach-s3c2410/include/mach/ts.h
@@ -0,0 +1,35 @@
+/* arch/arm/mach-s3c2410/include/mach/ts.h
+ *
+ * Copyright (c) 2005 Arnaud Patard <arnaud.patard@rtp-net.org>
+ *
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ *
+ * Changelog:
+ * 24-Mar-2005 RTP Created file
+ * 03-Aug-2005 RTP Renamed to ts.h
+ */
+
+#ifndef __ASM_ARM_TS_H
+#define __ASM_ARM_TS_H
+
+#include <linux/input/touchscreen/ts_filter.h>
+
+struct s3c2410_ts_mach_info {
+ /* Touchscreen delay. */
+ int delay;
+ /* Prescaler value. */
+ int presc;
+ /*
+ * Null-terminated array of pointers to filter APIs and configurations
+ * we want to use. In the same order they will be applied.
+ */
+ const struct ts_filter_chain_configuration *filter_config;
+};
+
+void set_s3c2410ts_info(const struct s3c2410_ts_mach_info *hard_s3c2410ts_info);
+
+#endif /* __ASM_ARM_TS_H */
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
index 103e913f225..bdb37dd567d 100644
--- a/arch/arm/mach-s3c2442/Kconfig
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -33,6 +33,11 @@ config MACH_NEO1973_GTA02
select POWER_SUPPLY
select MACH_NEO1973
select S3C2410_PWM
+ select S3C_DEV_USB_HOST
+ select S3C_DEV_NAND
+ select FIQ
+ select S3C_PWM
+ select S3C24XX_GPIO_EXTRA64
help
Say Y here if you are using the Openmoko GTA02 / Freerunner GSM Phone
diff --git a/arch/arm/mach-s3c2442/Makefile b/arch/arm/mach-s3c2442/Makefile
index 2a19113a576..cf39481cb5c 100644
--- a/arch/arm/mach-s3c2442/Makefile
+++ b/arch/arm/mach-s3c2442/Makefile
@@ -12,7 +12,11 @@ obj- :=
obj-$(CONFIG_CPU_S3C2442) += s3c2442.o
obj-$(CONFIG_CPU_S3C2442) += clock.o
-obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o
-
+obj-$(CONFIG_MACH_NEO1973_GTA02) += mach-gta02.o \
+ gta02-pm-bt.o \
+ gta02-pm-gps.o \
+ gta02-pm-gsm.o \
+ gta02-pm-wlan.o \
+ gta02-fiq.o
# Machine support
diff --git a/arch/arm/mach-s3c2442/gta02-fiq.c b/arch/arm/mach-s3c2442/gta02-fiq.c
new file mode 100644
index 00000000000..d91c52341d5
--- /dev/null
+++ b/arch/arm/mach-s3c2442/gta02-fiq.c
@@ -0,0 +1,135 @@
+#include <linux/kernel.h>
+
+#include <asm/fiq.h>
+#include <mach/regs-irq.h>
+#include <plat/regs-timer.h>
+#include <mach/irqs.h>
+#include <linux/io.h>
+#include <linux/pwm.h>
+#include <linux/err.h>
+#include <linux/hdq.h>
+
+/* -------------------------------------------------------------------------------
+ * GTA02 FIQ related
+ *
+ * Calls into vibrator and hdq and based on the return values
+ * determines if we the FIQ source be kept alive
+ */
+
+#define DIVISOR_FROM_US(x) ((x) << 3)
+
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+#define FIQ_DIVISOR_HDQ DIVISOR_FROM_US(HDQ_SAMPLE_PERIOD_US)
+extern int hdq_fiq_handler(void);
+#endif
+
+/* Global data related to our fiq source */
+static uint32_t gta02_fiq_ack_mask;
+static const int gta02_gta02_fiq_timer_id = 2;
+
+struct pwm_device* gta02_fiq_timer;
+
+void gta02_fiq_handler(void)
+{
+ unsigned long intmask;
+ int keep_running = 0;
+ /* disable further timer interrupts if nobody has any work
+ * or adjust rate according to who still has work
+ *
+ * CAUTION: it means forground code must disable FIQ around
+ * its own non-atomic S3C2410_INTMSK changes... not common
+ * thankfully and taken care of by the fiq-basis patch
+ */
+
+#ifdef CONFIG_HDQ_GPIO_BITBANG
+ keep_running = hdq_fiq_handler();
+#endif
+ if (!keep_running) {
+ /* Disable irq */
+ intmask = __raw_readl(S3C2410_INTMSK);
+ intmask |= (gta02_fiq_ack_mask);
+ __raw_writel(intmask, S3C2410_INTMSK);
+ }
+
+ __raw_writel(gta02_fiq_ack_mask, S3C2410_SRCPND);
+}
+
+void gta02_fiq_kick(void)
+{
+ unsigned long flags;
+ unsigned long intmask;
+ /* we have to take care about FIQ because this modification is
+ * non-atomic, FIQ could come in after the read and before the
+ * writeback and its changes to the register would be lost
+ * (platform INTMSK mod code is taken care of already)
+ */
+ local_save_flags(flags);
+ local_fiq_disable();
+
+ /* allow FIQs to resume */
+ intmask = __raw_readl(S3C2410_INTMSK);
+ intmask &= ~(gta02_fiq_ack_mask);
+ __raw_writel(intmask, S3C2410_INTMSK);
+
+ local_irq_restore(flags);
+
+}
+
+int gta02_fiq_enable(void)
+{
+ int ret = 0;
+
+ local_fiq_disable();
+
+ gta02_fiq_timer = pwm_request(gta02_gta02_fiq_timer_id, "fiq timer");
+
+ if (IS_ERR(gta02_fiq_timer)) {
+ ret = PTR_ERR(gta02_fiq_timer);
+ printk("GTA02 FIQ: Could not request fiq timer: %d\n", ret);
+ return ret;
+ }
+
+ gta02_fiq_ack_mask = 1 << (IRQ_TIMER0 + gta02_gta02_fiq_timer_id
+ - S3C2410_CPUIRQ_OFFSET);
+
+
+ ret = pwm_config(gta02_fiq_timer, HDQ_SAMPLE_PERIOD_US * 1000,
+ HDQ_SAMPLE_PERIOD_US * 1000);
+ if (ret) {
+ printk("GTA02 FIQ: Could not configure fiq timer: %d\n", ret);
+ goto err;
+ }
+
+ set_fiq_c_handler(gta02_fiq_handler);
+
+ __raw_writel(gta02_fiq_ack_mask, S3C2410_INTMOD);
+
+ pwm_enable(gta02_fiq_timer);
+
+ local_fiq_enable();
+
+ return 0;
+
+err:
+ pwm_free(gta02_fiq_timer);
+
+ return ret;
+}
+
+void gta02_fiq_disable(void)
+{
+ local_fiq_disable();
+
+ if (!gta02_fiq_timer)
+ return;
+
+ __raw_writel(0, S3C2410_INTMOD);
+ set_fiq_c_handler(NULL);
+
+ pwm_disable(gta02_fiq_timer);
+
+ pwm_free(gta02_fiq_timer);
+
+ gta02_fiq_timer = NULL;
+}
+/* -------------------- /GTA02 FIQ Handler ------------------------------------- */
diff --git a/arch/arm/mach-s3c2442/gta02-pm-bt.c b/arch/arm/mach-s3c2442/gta02-pm-bt.c
new file mode 100644
index 00000000000..76671ce96d0
--- /dev/null
+++ b/arch/arm/mach-s3c2442/gta02-pm-bt.c
@@ -0,0 +1,257 @@
+/*
+ * Bluetooth PM code for the Openmoko Freerunner GSM Phone
+ *
+ * (C) 2007 by Openmoko Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/rfkill.h>
+#include <linux/err.h>
+#include <mach/gpio-fns.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/gta02.h>
+#include <linux/mfd/pcf50633/gpio.h>
+
+#include <linux/regulator/consumer.h>
+
+#define DRVMSG "Openmoko Freerunner Bluetooth Power Management"
+
+struct gta02_pm_bt_data {
+ struct regulator *regulator;
+ struct rfkill *rfkill;
+ int pre_resume_state;
+};
+
+static ssize_t bt_read(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int ret = 0;
+ if (!strcmp(attr->attr.name, "power_on")) {
+ if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN))
+ ret = 1;
+ } else if (!strcmp(attr->attr.name, "reset")) {
+ if (s3c2410_gpio_getpin(GTA02_GPIO_BT_EN) == 0)
+ ret = 1;
+ }
+
+ if (!ret) {
+ return strlcpy(buf, "0\n", 3);
+ } else {
+ return strlcpy(buf, "1\n", 3);
+ }
+}
+
+static void __gta02_pm_bt_toggle_radio(struct device *dev, unsigned int on)
+{
+ struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev);
+
+ dev_info(dev, "__gta02_pm_bt_toggle_radio %d\n", on);
+
+ bt_data = dev_get_drvdata(dev);
+
+ s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, !on);
+
+ if (on) {
+ if (!regulator_is_enabled(bt_data->regulator))
+ regulator_enable(bt_data->regulator);
+ } else {
+ if (regulator_is_enabled(bt_data->regulator))
+ regulator_disable(bt_data->regulator);
+ }
+
+ s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, on);
+}
+
+
+static int bt_rfkill_set_block(void *data, bool blocked)
+{
+ struct device *dev = data;
+
+ __gta02_pm_bt_toggle_radio(dev, !blocked);
+
+ return 0;
+}
+
+static const struct rfkill_ops gta02_bt_rfkill_ops = {
+ .set_block = bt_rfkill_set_block,
+};
+
+
+static ssize_t bt_write(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long on = simple_strtoul(buf, NULL, 10);
+ struct gta02_pm_bt_data *bt_data = dev_get_drvdata(dev);
+
+ if (!strcmp(attr->attr.name, "power_on")) {
+ rfkill_set_sw_state(bt_data->rfkill, on ? 1 : 0);
+
+ __gta02_pm_bt_toggle_radio(dev, on);
+ } else if (!strcmp(attr->attr.name, "reset")) {
+ /* reset is low-active, so we need to invert */
+ s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, on ? 0 : 1);
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR(power_on, 0644, bt_read, bt_write);
+static DEVICE_ATTR(reset, 0644, bt_read, bt_write);
+
+#ifdef CONFIG_PM
+static int gta02_bt_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
+
+ dev_dbg(&pdev->dev, DRVMSG ": suspending\n");
+
+ bt_data->pre_resume_state = s3c2410_gpio_getpin(GTA02_GPIO_BT_EN);
+ __gta02_pm_bt_toggle_radio(&pdev->dev, 0);
+
+ return 0;
+}
+
+static int gta02_bt_resume(struct platform_device *pdev)
+{
+ struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
+ dev_dbg(&pdev->dev, DRVMSG ": resuming\n");
+
+ __gta02_pm_bt_toggle_radio(&pdev->dev, bt_data->pre_resume_state);
+ return 0;
+}
+#else
+#define gta02_bt_suspend NULL
+#define gta02_bt_resume NULL
+#endif
+
+static struct attribute *gta02_bt_sysfs_entries[] = {
+ &dev_attr_power_on.attr,
+ &dev_attr_reset.attr,
+ NULL
+};
+
+static struct attribute_group gta02_bt_attr_group = {
+ .name = NULL,
+ .attrs = gta02_bt_sysfs_entries,
+};
+
+static int __init gta02_bt_probe(struct platform_device *pdev)
+{
+ struct rfkill *rfkill;
+ struct regulator *regulator;
+ struct gta02_pm_bt_data *bt_data;
+ int ret;
+
+ dev_info(&pdev->dev, DRVMSG ": starting\n");
+
+ bt_data = kzalloc(sizeof(*bt_data), GFP_KERNEL);
+ dev_set_drvdata(&pdev->dev, bt_data);
+
+ regulator = regulator_get(&pdev->dev, "BT_3V2");
+ if (IS_ERR(regulator))
+ return -ENODEV;
+
+ bt_data->regulator = regulator;
+
+ /* this tests the true physical state of the regulator... */
+ if (regulator_is_enabled(regulator)) {
+ /*
+ * but these only operate on the logical state of the
+ * regulator... so we need to logicaly "adopt" it on
+ * to turn it off
+ */
+ regulator_enable(regulator);
+ regulator_disable(regulator);
+ }
+
+ /* we pull reset to low to make sure that the chip doesn't
+ * drain power through the reset line */
+ s3c2410_gpio_setpin(GTA02_GPIO_BT_EN, 0);
+
+ rfkill = rfkill_alloc(pdev->name, &pdev->dev, RFKILL_TYPE_BLUETOOTH,
+ &gta02_bt_rfkill_ops, &pdev->dev);
+
+ if (!rfkill) {
+ dev_err(&pdev->dev, "Failed to allocate rfkill\n");
+ return -ENOMEM;
+ }
+
+ rfkill_init_sw_state(rfkill, 0);
+
+ ret = rfkill_register(rfkill);
+ if (ret) {
+ rfkill_destroy(rfkill);
+ dev_err(&pdev->dev, "Failed to register rfkill\n");
+ return ret;
+ }
+
+ bt_data->rfkill = rfkill;
+
+ return sysfs_create_group(&pdev->dev.kobj, &gta02_bt_attr_group);
+}
+
+static int gta02_bt_remove(struct platform_device *pdev)
+{
+ struct gta02_pm_bt_data *bt_data = dev_get_drvdata(&pdev->dev);
+ struct regulator *regulator;
+
+ sysfs_remove_group(&pdev->dev.kobj, &gta02_bt_attr_group);
+
+ if (bt_data->rfkill) {
+ rfkill_destroy(bt_data->rfkill);
+ }
+
+ if (!bt_data || !bt_data->regulator)
+ return 0;
+
+ regulator = bt_data->regulator;
+
+ /* Make sure regulator is disabled before calling regulator_put */
+ if (regulator_is_enabled(regulator))
+ regulator_disable(regulator);
+
+ regulator_put(regulator);
+
+ kfree(bt_data);
+
+ return 0;
+}
+
+static struct platform_driver gta02_bt_driver = {
+ .probe = gta02_bt_probe,
+ .remove = gta02_bt_remove,
+ .suspend = gta02_bt_suspend,
+ .resume = gta02_bt_resume,
+ .driver = {
+ .name = "gta02-pm-bt",
+ },
+};
+
+static int __devinit gta02_bt_init(void)
+{
+ return platform_driver_register(&gta02_bt_driver);
+}
+module_init(gta02_bt_init);
+
+static void gta02_bt_exit(void)
+{
+ platform_driver_unregister(&gta02_bt_driver);
+}
+module_exit(gta02_bt_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION(DRVMSG);
diff --git a/arch/arm/mach-s3c2442/gta02-pm-gps.c b/arch/arm/mach-s3c2442/gta02-pm-gps.c
new file mode 100644
index 00000000000..2b71b7e4811
--- /dev/null
+++ b/arch/arm/mach-s3c2442/gta02-pm-gps.c
@@ -0,0 +1,246 @@
+/*
+ * GPS Power Management code for the Openmoko Freerunner GSM Phone
+ *
+ * (C) 2007-2009 by Openmoko Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <mach/gpio-fns.h>
+
+#include <asm/mach-types.h>
+
+#include <mach/gta02.h>
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/pmic.h>
+
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+
+struct gta02_pm_gps_data {
+#ifdef CONFIG_PM
+ int keep_on_in_suspend;
+#endif
+ int power_was_on;
+ struct regulator *regulator;
+};
+
+static struct gta02_pm_gps_data gta02_gps;
+
+int gta02_pm_gps_is_on(void)
+{
+ return gta02_gps.power_was_on;
+}
+EXPORT_SYMBOL_GPL(gta02_pm_gps_is_on);
+
+/* This is the POWERON pin */
+static void gps_pwron_set(int on)
+{
+ if (on) {
+ /* return UART pins to being UART pins */
+ s3c2410_gpio_cfgpin(S3C2410_GPH(4), S3C2410_GPH4_TXD1);
+ /* remove pulldown now it won't be floating any more */
+ s3c2410_gpio_pullup(S3C2410_GPH(5), 0);
+
+ if (!gta02_gps.power_was_on)
+ regulator_enable(gta02_gps.regulator);
+ } else {
+ /*
+ * take care not to power unpowered GPS from UART TX
+ * return them to GPIO and force low
+ */
+ s3c2410_gpio_cfgpin(S3C2410_GPH(4), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPH(4), 0);
+ /* don't let RX from unpowered GPS float */
+ s3c2410_gpio_pullup(S3C2410_GPH(5), 1);
+ if (gta02_gps.power_was_on)
+ regulator_disable(gta02_gps.regulator);
+ }
+}
+
+static int gps_pwron_get(void)
+{
+ return regulator_is_enabled(gta02_gps.regulator);
+}
+
+#ifdef CONFIG_PM
+/* This is the flag for keeping gps ON during suspend */
+static void gps_keep_on_in_suspend_set(int on)
+{
+ gta02_gps.keep_on_in_suspend = on;
+}
+
+static int gps_keep_on_in_suspend_get(void)
+{
+ return gta02_gps.keep_on_in_suspend;
+}
+#endif
+
+static ssize_t power_gps_read(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ int ret = 0;
+
+ if (!strcmp(attr->attr.name, "power_on") ||
+ !strcmp(attr->attr.name, "pwron")) {
+ ret = gps_pwron_get();
+#ifdef CONFIG_PM
+ } else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
+ ret = gps_keep_on_in_suspend_get();
+#endif
+ }
+ if (ret)
+ return strlcpy(buf, "1\n", 3);
+ else
+ return strlcpy(buf, "0\n", 3);
+}
+
+static ssize_t power_gps_write(struct device *dev,
+ struct device_attribute *attr, const char *buf,
+ size_t count)
+{
+ unsigned long on = simple_strtoul(buf, NULL, 10);
+
+ if (!strcmp(attr->attr.name, "power_on") ||
+ !strcmp(attr->attr.name, "pwron")) {
+ gps_pwron_set(on);
+ gta02_gps.power_was_on = !!on;
+#ifdef CONFIG_PM
+ } else if (!strcmp(attr->attr.name, "keep_on_in_suspend")) {
+ gps_keep_on_in_suspend_set(on);
+#endif
+ }
+ return count;
+}
+
+#ifdef CONFIG_PM
+static int gta02_pm_gps_suspend(struct device *dev)
+{
+ if (!gta02_gps.keep_on_in_suspend ||
+ !gta02_gps.power_was_on)
+ gps_pwron_set(0);
+ else
+ dev_warn(dev, "GTA02: keeping gps ON "
+ "during suspend\n");
+ return 0;
+}
+
+static int gta02_pm_gps_resume(struct device *dev)
+{
+ if (!gta02_gps.keep_on_in_suspend && gta02_gps.power_was_on)
+ gps_pwron_set(1);
+
+ return 0;
+}
+
+static DEVICE_ATTR(keep_on_in_suspend, 0644, power_gps_read, power_gps_write);
+
+static struct dev_pm_ops gta02_gps_pm_ops = {
+ .suspend = gta02_pm_gps_suspend,
+ .resume = gta02_pm_gps_resume,
+};
+
+#define GTA02_GPS_PM_OPS (&gta02_gps_pm_ops)
+
+#else
+#define GTA02_GPS_PM_OPS NULL
+#endif
+
+static DEVICE_ATTR(power_on, 0644, power_gps_read, power_gps_write);
+
+static struct attribute *gta02_gps_sysfs_entries[] = {
+ &dev_attr_power_on.attr,
+#ifdef CONFIG_PM
+ &dev_attr_keep_on_in_suspend.attr,
+#endif
+ NULL
+};
+
+static struct attribute_group gta02_gps_attr_group = {
+ .name = NULL,
+ .attrs = gta02_gps_sysfs_entries,
+};
+
+static int __init gta02_pm_gps_probe(struct platform_device *pdev)
+{
+ gta02_gps.regulator = regulator_get(&pdev->dev, "RF_3V");
+ if (IS_ERR(gta02_gps.regulator)) {
+ dev_err(&pdev->dev, "probe failed %ld\n",
+ PTR_ERR(gta02_gps.regulator));
+
+ return PTR_ERR(gta02_gps.regulator);
+ }
+
+ dev_info(&pdev->dev, "starting\n");
+
+ /*
+ * Here we should call the code that handles the set GPS power
+ * off action. But, the regulator API does not allow us to
+ * reassert regulator state, and when we read the regulator API
+ * logical state, it can differ from the actual state, So
+ * a workaround for this is to just set the regulator off in the
+ * PMU directly. Because that's different from normal flow, we
+ * have to reproduce other things from the OFF action here too.
+ */
+
+ /*
+ * u-boot enables LDO5 (GPS), which doesn't make sense and
+ * causes confusion. We therefore disable the regulator here.
+ */
+ pcf50633_reg_write(gta02_pcf, PCF50633_REG_LDO5ENA, 0);
+
+ /*
+ * take care not to power unpowered GPS from UART TX
+ * return them to GPIO and force low
+ */
+ s3c2410_gpio_cfgpin(S3C2410_GPH(4), S3C2410_GPIO_OUTPUT);
+ s3c2410_gpio_setpin(S3C2410_GPH(4), 0);
+ /* don't let RX from unpowered GPS float */
+ s3c2410_gpio_pullup(S3C2410_GPH(5), 1);
+
+ return sysfs_create_group(&pdev->dev.kobj,
+ &gta02_gps_attr_group);
+}
+
+static int gta02_pm_gps_remove(struct platform_device *pdev)
+{
+ regulator_put(gta02_gps.regulator);
+ sysfs_remove_group(&pdev->dev.kobj, &gta02_gps_attr_group);
+ return 0;
+}
+
+static struct platform_driver gta02_pm_gps_driver = {
+ .probe = gta02_pm_gps_probe,
+ .remove = gta02_pm_gps_remove,
+ .driver = {
+ .name = "gta02-pm-gps",
+ .pm = GTA02_GPS_PM_OPS,
+ },
+};
+
+static int __devinit gta02_pm_gps_init(void)
+{
+ return platform_driver_register(&gta02_pm_gps_driver);
+}
+module_init(gta02_pm_gps_init);
+
+static void gta02_pm_gps_exit(void)
+{
+ platform_driver_unregister(&gta02_pm_gps_driver);
+}
+module_exit(gta02_pm_gps_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
diff --git a/arch/arm/mach-s3c2442/gta02-pm-gsm.c b/arch/arm/mach-s3c2442/gta02-pm-gsm.c
new file mode 100644
index 00000000000..4b6cad806fe
--- /dev/null
+++ b/arch/arm/mach-s3c2442/gta02-pm-gsm.c
@@ -0,0 +1,303 @@
+/*
+ * GSM Management code for the Openmoko Freerunner GSM Phone
+ *
+ * (C) 2007 by Openmoko Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/platform_device.h>
+#include <linux/console.h>
+#include <linux/errno.h>
+#include <linux/interrupt.h>
+#include <linux/delay.h>
+
+#include <mach/gpio.h>
+#include <asm/mach-types.h>
+
+#include <mach/hardware.h>
+
+#include <mach/gta02.h>
+#include <linux/mfd/pcf50633/gpio.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+
+/* FIXME: Add interrupt handler counting irqs or something */
+static int gta_gsm_interrupts;
+
+extern void s3c24xx_serial_console_set_silence(int);
+
+struct gta02pm_priv {
+ int gpio_ndl_gsm;
+ struct console *con;
+};
+
+static struct gta02pm_priv gta02_gsm;
+
+static struct console *find_s3c24xx_console(void)
+{
+ struct console *con;
+
+ acquire_console_sem();
+
+ for (con = console_drivers; con; con = con->next) {
+ if (!strcmp(con->name, "ttySAC"))
+ break;
+ }
+
+ release_console_sem();
+
+ return con;
+}
+
+static ssize_t gsm_read(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ if (!strcmp(attr->attr.name, "power_on")) {
+ if (pcf50633_gpio_get(gta02_pcf, PCF50633_GPIO2))
+ goto out_1;
+ } else if (!strcmp(attr->attr.name, "download")) {
+ if (!s3c2410_gpio_getpin(GTA02_GPIO_nDL_GSM))
+ goto out_1;
+ } else if (!strcmp(attr->attr.name, "flowcontrolled")) {
+ if (s3c2410_gpio_getcfg(S3C2410_GPH(1)) == S3C2410_GPIO_OUTPUT)
+ goto out_1;
+ }
+
+ return strlcpy(buf, "0\n", 3);
+out_1:
+ return strlcpy(buf, "1\n", 3);
+}
+
+static void gsm_on_off(struct device *dev, int on)
+{
+ if (!on) {
+ s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_INPUT);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPIO_INPUT);
+
+ pcf50633_gpio_set(gta02_pcf, PCF50633_GPIO2, 0);
+
+ if (gta02_gsm.con) {
+ s3c24xx_serial_console_set_silence(0);
+ console_start(gta02_gsm.con);
+
+ dev_dbg(dev, "powered down gta02 GSM, enabling "
+ "serial console\n");
+ }
+
+ return;
+ }
+
+ if (gta02_gsm.con) {
+ dev_dbg(dev, "powering up GSM, thus "
+ "disconnecting serial console\n");
+
+ console_stop(gta02_gsm.con);
+ s3c24xx_serial_console_set_silence(1);
+ }
+
+ /* allow UART to talk to GSM side now we will power it */
+ s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPH1_nRTS0);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(2), S3C2410_GPH2_TXD0);
+
+ pcf50633_gpio_set(gta02_pcf, PCF50633_GPIO2, 7);
+
+ msleep(100);
+
+ s3c2410_gpio_setpin(GTA02_GPIO_MODEM_ON, 1);
+ msleep(500);
+ s3c2410_gpio_setpin(GTA02_GPIO_MODEM_ON, 0);
+
+ /*
+ * workaround for calypso firmware moko10 and earlier,
+ * without this it will leave IRQ line high after
+ * booting
+ */
+ s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+ msleep(1000);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPH1_nRTS0);
+
+}
+
+static ssize_t gsm_write(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ unsigned long on = simple_strtoul(buf, NULL, 10);
+
+ if (!strcmp(attr->attr.name, "power_on")) {
+ gsm_on_off(dev, on);
+
+ return count;
+ }
+
+ if (!strcmp(attr->attr.name, "download")) {
+ /*
+ * the keyboard / buttons driver requests and enables
+ * the JACK_INSERT IRQ. We have to take care about
+ * not enabling and disabling the IRQ when it was
+ * already in that state or we get "unblanaced IRQ"
+ * kernel warnings and stack dumps. So we use the
+ * copy of the ndl_gsm state to figure out if we should
+ * enable or disable the jack interrupt
+ */
+ if (on) {
+ if (gta02_gsm.gpio_ndl_gsm)
+ disable_irq(gpio_to_irq(
+ GTA02_GPIO_JACK_INSERT));
+ } else {
+ if (!gta02_gsm.gpio_ndl_gsm)
+ enable_irq(gpio_to_irq(
+ GTA02_GPIO_JACK_INSERT));
+ }
+
+ gta02_gsm.gpio_ndl_gsm = !on;
+ s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, !on);
+
+ return count;
+ }
+
+ if (!strcmp(attr->attr.name, "flowcontrolled")) {
+ if (on) {
+ gta_gsm_interrupts = 0;
+ s3c2410_gpio_setpin(S3C2410_GPH(1), 1);
+ s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPIO_OUTPUT);
+ } else
+ s3c2410_gpio_cfgpin(S3C2410_GPH(1), S3C2410_GPH1_nRTS0);
+ }
+
+ return count;
+}
+
+static DEVICE_ATTR(power_on, 0644, gsm_read, gsm_write);
+static DEVICE_ATTR(reset, 0644, gsm_read, gsm_write);
+static DEVICE_ATTR(download, 0644, gsm_read, gsm_write);
+static DEVICE_ATTR(flowcontrolled, 0644, gsm_read, gsm_write);
+
+#ifdef CONFIG_PM
+
+static int gta02_gsm_suspend(struct device *dev)
+{
+ /* GPIO state is saved/restored by S3C2410 core GPIO driver, so we
+ * don't need to do much here. */
+
+ /* If flowcontrol asserted, abort if GSM already interrupted */
+ if (s3c2410_gpio_getcfg(S3C2410_GPH(1)) == S3C2410_GPIO_OUTPUT) {
+ if (gta_gsm_interrupts)
+ goto busy;
+ }
+
+ /* disable DL GSM to prevent jack_insert becoming 'floating' */
+ s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, 1);
+ return 0;
+
+busy:
+ return -EBUSY;
+}
+
+static int gta02_gsm_suspend_late(struct device *dev)
+{
+ /* Last chance: abort if GSM already interrupted */
+ if (s3c2410_gpio_getcfg(S3C2410_GPH(1)) == S3C2410_GPIO_OUTPUT) {
+ if (gta_gsm_interrupts)
+ return -EBUSY;
+ }
+ return 0;
+}
+
+static int gta02_gsm_resume(struct device *dev)
+{
+ /* GPIO state is saved/restored by S3C2410 core GPIO driver, so we
+ * don't need to do much here. */
+
+ /* Make sure that the kernel console on the serial port is still
+ * disabled. FIXME: resume ordering race with serial driver! */
+ if (gta02_gsm.con && s3c2410_gpio_getpin(GTA02_GPIO_MODEM_ON))
+ console_stop(gta02_gsm.con);
+
+ s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, gta02_gsm.gpio_ndl_gsm);
+
+ return 0;
+}
+
+static struct dev_pm_ops gta02_gsm_pm_ops = {
+ .suspend = gta02_gsm_suspend,
+ .suspend_noirq = gta02_gsm_suspend_late,
+ .resume = gta02_gsm_resume,
+};
+
+#define GTA02_GSM_PM_OPS (&gta02_gsm_pm_ops)
+
+#else
+#define GTA02_GSM_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+static struct attribute *gta02_gsm_sysfs_entries[] = {
+ &dev_attr_power_on.attr,
+ &dev_attr_reset.attr,
+ &dev_attr_download.attr,
+ &dev_attr_flowcontrolled.attr,
+ NULL
+};
+
+static struct attribute_group gta02_gsm_attr_group = {
+ .name = NULL,
+ .attrs = gta02_gsm_sysfs_entries,
+};
+
+static int __init gta02_gsm_probe(struct platform_device *pdev)
+{
+ gta02_gsm.con = find_s3c24xx_console();
+ if (!gta02_gsm.con)
+ dev_warn(&pdev->dev,
+ "cannot find S3C24xx console driver\n");
+
+ /* note that download initially disabled, and enforce that */
+ gta02_gsm.gpio_ndl_gsm = 1;
+ s3c2410_gpio_setpin(GTA02_GPIO_nDL_GSM, 1);
+
+ /* GSM is to be initially off (at boot, or if this module inserted) */
+ gsm_on_off(&pdev->dev, 0);
+
+ return sysfs_create_group(&pdev->dev.kobj, &gta02_gsm_attr_group);
+}
+
+static int gta02_gsm_remove(struct platform_device *pdev)
+{
+ sysfs_remove_group(&pdev->dev.kobj, &gta02_gsm_attr_group);
+
+ return 0;
+}
+
+static struct platform_driver gta02_gsm_driver = {
+ .probe = gta02_gsm_probe,
+ .remove = gta02_gsm_remove,
+ .driver = {
+ .name = "gta02-pm-gsm",
+ .pm = GTA02_GSM_PM_OPS,
+ },
+};
+
+static int __devinit gta02_gsm_init(void)
+{
+ return platform_driver_register(&gta02_gsm_driver);
+}
+module_init(gta02_gsm_init);
+
+static void gta02_gsm_exit(void)
+{
+ platform_driver_unregister(&gta02_gsm_driver);
+}
+module_exit(gta02_gsm_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION("Openmoko Freerunner GSM Power Management");
diff --git a/arch/arm/mach-s3c2442/gta02-pm-wlan.c b/arch/arm/mach-s3c2442/gta02-pm-wlan.c
new file mode 100644
index 00000000000..6e0226600b1
--- /dev/null
+++ b/arch/arm/mach-s3c2442/gta02-pm-wlan.c
@@ -0,0 +1,201 @@
+/*
+ * GTA02 WLAN power management
+ *
+ * (C) 2008, 2009 by Openmoko Inc.
+ * Author: Andy Green <andy@openmoko.com>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation
+ *
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/kernel.h>
+#include <linux/mutex.h>
+#include <linux/platform_device.h>
+
+#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/gta02.h>
+#include <mach/gta02-pm-wlan.h>
+#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
+#include <mach/gpio-fns.h>
+
+#include <linux/delay.h>
+#include <linux/rfkill.h>
+
+
+/* ----- Module hardware reset ("power") ----------------------------------- */
+
+
+void gta02_wlan_reset(int assert_reset)
+{
+ if (assert_reset) {
+ s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 0);
+ msleep(200); /* probably excessive but we don't have specs */
+ } else {
+ s3c2410_gpio_setpin(GTA02_GPIO_nWLAN_RESET, 1);
+ }
+}
+
+/* ----- rfkill ------------------------------------------------------------ */
+
+/*
+ * S3C MCI handles suspend/resume through device removal/insertion. In order to
+ * preserve rfkill state, as required in clause 7 of section 3.1 in rfkill.txt,
+ * we therefore need to maintain rfkill state outside the driver.
+ *
+ * This platform driver is as good a place as any other.
+ */
+
+static int (*gta02_wlan_rfkill_cb)(void *user, int on);
+static void *gta02_wlan_rfkill_user;
+static DEFINE_MUTEX(gta02_wlan_rfkill_lock);
+static int gta02_wlan_rfkill_on;
+
+/*
+ * gta02_wlan_query_rfkill_lock is used to obtain the rfkill state before the
+ * driver is ready to process rfkill callbacks. To prevent the state from
+ * changing until the driver has completed its initialization, we grab and hold
+ * the rfkill lock.
+ *
+ * A call to gta02_wlan_query_rfkill_lock must be followed by either
+ * - a call to gta02_wlan_set_rfkill_cb, to complete the setup, or
+ * - a call to gta02_wlan_query_rfkill_unlock to abort the setup process.
+ */
+
+int gta02_wlan_query_rfkill_lock(void)
+{
+ mutex_lock(&gta02_wlan_rfkill_lock);
+ return gta02_wlan_rfkill_on;
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_query_rfkill_lock);
+
+void gta02_wlan_query_rfkill_unlock(void)
+{
+ mutex_unlock(&gta02_wlan_rfkill_lock);
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_query_rfkill_unlock);
+
+void gta02_wlan_set_rfkill_cb(int (*cb)(void *user, int on), void *user)
+{
+ BUG_ON(!mutex_is_locked(&gta02_wlan_rfkill_lock));
+ BUG_ON(gta02_wlan_rfkill_cb);
+ gta02_wlan_rfkill_cb = cb;
+ gta02_wlan_rfkill_user = user;
+ mutex_unlock(&gta02_wlan_rfkill_lock);
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_set_rfkill_cb);
+
+void gta02_wlan_clear_rfkill_cb(void)
+{
+ mutex_lock(&gta02_wlan_rfkill_lock);
+ BUG_ON(!gta02_wlan_rfkill_cb);
+ gta02_wlan_rfkill_cb = NULL;
+ mutex_unlock(&gta02_wlan_rfkill_lock);
+}
+EXPORT_SYMBOL_GPL(gta02_wlan_clear_rfkill_cb);
+
+static int gta02_wlan_set_radio_block(void *data, bool blocked)
+{
+ struct device *dev = data;
+ int res = 0;
+
+ dev_dbg(dev, "gta02_wlan_toggle_radio: blocked %d (%p)\n",
+ blocked, gta02_wlan_rfkill_cb);
+ mutex_lock(&gta02_wlan_rfkill_lock);
+ if (gta02_wlan_rfkill_cb)
+ res = gta02_wlan_rfkill_cb(gta02_wlan_rfkill_user, !blocked);
+ if (!res)
+ gta02_wlan_rfkill_on = !blocked;
+ mutex_unlock(&gta02_wlan_rfkill_lock);
+ return res;
+}
+
+static const struct rfkill_ops gta02_wlan_rfkill_ops = {
+ .set_block = gta02_wlan_set_radio_block,
+};
+
+/* ----- Initialization/removal -------------------------------------------- */
+
+
+static int __init gta02_wlan_probe(struct platform_device *pdev)
+{
+ /* default-on for now */
+ const int default_state = 1;
+ struct rfkill *rfkill;
+ int ret;
+
+ dev_info(&pdev->dev, "starting\n");
+
+ s3c2410_gpio_cfgpin(GTA02_GPIO_nWLAN_RESET, S3C2410_GPIO_OUTPUT);
+ gta02_wlan_reset(1);
+ gta02_wlan_reset(0);
+
+ rfkill = rfkill_alloc("ar6000", &pdev->dev, RFKILL_TYPE_WLAN,
+ &gta02_wlan_rfkill_ops, &pdev->dev);
+
+
+ if (!rfkill) {
+ dev_err(&pdev->dev, "Failed to allocate rfkill\n");
+ return -ENOMEM;
+ }
+
+ rfkill_init_sw_state(rfkill, default_state);
+ /*
+ * If the WLAN driver somehow managed to get activated before we're
+ * ready, the driver is now in an unknown state, which isn't something
+ * we're prepared to handle. This can't happen, so just fail hard.
+ */
+ BUG_ON(gta02_wlan_rfkill_cb);
+ gta02_wlan_rfkill_on = default_state;
+
+ ret = rfkill_register(rfkill);
+ if (ret) {
+ rfkill_destroy(rfkill);
+ dev_err(&pdev->dev, "Failed to register rfkill\n");
+ return ret;
+ }
+
+ dev_set_drvdata(&pdev->dev, rfkill);
+
+ return 0;
+}
+
+static int gta02_wlan_remove(struct platform_device *pdev)
+{
+ struct rfkill *rfkill = dev_get_drvdata(&pdev->dev);
+
+ rfkill_destroy(rfkill);
+
+ return 0;
+}
+
+static struct platform_driver gta02_wlan_driver = {
+ .probe = gta02_wlan_probe,
+ .remove = gta02_wlan_remove,
+ .driver = {
+ .name = "gta02-pm-wlan",
+ },
+};
+
+static int __devinit gta02_wlan_init(void)
+{
+ return platform_driver_register(&gta02_wlan_driver);
+}
+module_init(gta02_wlan_init);
+
+static void gta02_wlan_exit(void)
+{
+ platform_driver_unregister(&gta02_wlan_driver);
+}
+module_exit(gta02_wlan_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("Openmoko GTA02 WLAN power management");
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02-fiq.h b/arch/arm/mach-s3c2442/include/mach/gta02-fiq.h
new file mode 100644
index 00000000000..90de3530595
--- /dev/null
+++ b/arch/arm/mach-s3c2442/include/mach/gta02-fiq.h
@@ -0,0 +1,9 @@
+#ifndef __GTA02_FIQ_H
+#define __GTA02_FIQ_H
+
+extern void gta02_fiq_handler(void);
+extern void gta02_fiq_kick(void);
+extern int gta02_fiq_enable(void);
+extern void gta02_fiq_disable(void);
+
+#endif
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h b/arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h
new file mode 100644
index 00000000000..f15180ac079
--- /dev/null
+++ b/arch/arm/mach-s3c2442/include/mach/gta02-pm-gps.h
@@ -0,0 +1 @@
+extern int gta02_pm_gps_is_on(void);
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h b/arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h
new file mode 100644
index 00000000000..48369789709
--- /dev/null
+++ b/arch/arm/mach-s3c2442/include/mach/gta02-pm-wlan.h
@@ -0,0 +1,10 @@
+#ifndef __MACH_GTA02_PM_WLAN_H
+#define __MACH_GTA02_PM_WLAN_H
+
+void gta02_wlan_reset(int assert_reset);
+int gta02_wlan_query_rfkill_lock(void);
+void gta02_wlan_query_rfkill_unlock(void);
+void gta02_wlan_set_rfkill_cb(int (*cb)(void *user, int on), void *user);
+void gta02_wlan_clear_rfkill_cb(void);
+
+#endif /* __MACH_GTA02_PM_WLAN_H */
diff --git a/arch/arm/mach-s3c2442/include/mach/gta02.h b/arch/arm/mach-s3c2442/include/mach/gta02.h
index 953331d8d56..b67e5ec2919 100644
--- a/arch/arm/mach-s3c2442/include/mach/gta02.h
+++ b/arch/arm/mach-s3c2442/include/mach/gta02.h
@@ -2,6 +2,7 @@
#define _GTA02_H
#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
/* Different hardware revisions, passed in ATAG_REVISION by u-boot */
#define GTA02v1_SYSTEM_REV 0x00000310
@@ -79,6 +80,11 @@
#define GTA02_PCB_ID2_0 S3C2410_GPD(3)
#define GTA02_PCB_ID2_1 S3C2410_GPD(4)
+#define GTA02_GPIO_GLAMO_BASE S3C_GPIO_END
+#define GTA02_GPIO_GLAMO(x) (GTA02_GPIO_GLAMO_BASE + (x))
+
int gta02_get_pcb_revision(void);
+extern struct pcf50633 *gta02_pcf;
+
#endif /* _GTA02_H */
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index 0fb385bd9cd..1480881268c 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -38,6 +38,7 @@
#include <linux/platform_device.h>
#include <linux/serial_core.h>
#include <linux/spi/spi.h>
+#include <linux/spi/spi_gpio.h>
#include <linux/mmc/host.h>
@@ -49,7 +50,6 @@
#include <linux/io.h>
#include <linux/i2c.h>
-#include <linux/backlight.h>
#include <linux/regulator/machine.h>
#include <linux/mfd/pcf50633/core.h>
@@ -57,6 +57,13 @@
#include <linux/mfd/pcf50633/adc.h>
#include <linux/mfd/pcf50633/gpio.h>
#include <linux/mfd/pcf50633/pmic.h>
+#include <linux/mfd/pcf50633/backlight.h>
+
+#include <linux/input.h>
+#include <linux/gpio_keys.h>
+
+#include <linux/leds.h>
+#include <linux/leds_pwm.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
@@ -85,9 +92,33 @@
#include <plat/pm.h>
#include <plat/udc.h>
#include <plat/gpio-cfg.h>
+#include <plat/gpio-core.h>
#include <plat/iic.h>
-static struct pcf50633 *gta02_pcf;
+#include <mach/gta02-pm-gps.h>
+#include <mach/gta02-pm-wlan.h>
+
+#include <linux/jbt6k74.h>
+#include <linux/glamofb.h>
+#include <linux/mfd/glamo.h>
+
+#include <mach/gta02-fiq.h>
+
+#include <linux/hdq.h>
+#include <linux/bq27000_battery.h>
+
+#include <linux/platform_battery.h>
+
+#include <mach/ts.h>
+#include <linux/input/touchscreen/ts_filter_chain.h>
+#ifdef CONFIG_TOUCHSCREEN_FILTER
+#include <linux/input/touchscreen/ts_filter_linear.h>
+#include <linux/input/touchscreen/ts_filter_mean.h>
+#include <linux/input/touchscreen/ts_filter_median.h>
+#include <linux/input/touchscreen/ts_filter_group.h>
+#endif
+
+struct pcf50633 *gta02_pcf;
/*
* This gets called every 1ms when we paniced.
@@ -149,6 +180,140 @@ static struct s3c2410_uartcfg gta02_uartcfgs[] = {
},
};
+/*
+ * we crank down SD Card clock dynamically when GPS is powered
+ */
+
+static int gta02_glamo_mci_use_slow(void)
+{
+ return gta02_pm_gps_is_on();
+}
+
+static void gta02_glamo_external_reset(int level)
+{
+ s3c2410_gpio_setpin(GTA02_GPIO_3D_RESET, level);
+ s3c2410_gpio_cfgpin(GTA02_GPIO_3D_RESET, S3C2410_GPIO_OUTPUT);
+}
+
+struct spi_gpio_platform_data spigpio_platform_data = {
+ .sck = GTA02_GPIO_GLAMO(10),
+ .mosi = GTA02_GPIO_GLAMO(11),
+ .miso = GTA02_GPIO_GLAMO(5),
+ .num_chipselect = 1,
+};
+
+static struct platform_device spigpio_device = {
+ .name = "spi_gpio",
+ .id = 2,
+ .dev = {
+ .platform_data = &spigpio_platform_data,
+ },
+};
+
+static void gta02_glamo_registered(struct device *dev)
+{
+ spigpio_device.dev.parent = dev;
+ platform_device_register(&spigpio_device);
+}
+
+static struct fb_videomode gta02_glamo_modes[] = {
+ {
+ .name = "480x640",
+ .xres = 480,
+ .yres = 640,
+ .pixclock = 40816,
+ .left_margin = 8,
+ .right_margin = 16,
+ .upper_margin = 2,
+ .lower_margin = 16,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .vmode = FB_VMODE_NONINTERLACED,
+ }, {
+ .name = "240x320",
+ .xres = 240,
+ .yres = 320,
+ .pixclock = 40816,
+ .left_margin = 8,
+ .right_margin = 16,
+ .upper_margin = 2,
+ .lower_margin = 16,
+ .hsync_len = 8,
+ .vsync_len = 2,
+ .vmode = FB_VMODE_NONINTERLACED,
+ }
+};
+
+
+static struct glamo_fb_platform_data gta02_glamo_fb_pdata = {
+ .width = 43,
+ .height = 58,
+
+ .num_modes = ARRAY_SIZE(gta02_glamo_modes),
+ .modes = gta02_glamo_modes,
+};
+
+static struct glamo_mmc_platform_data gta02_glamo_mmc_pdata = {
+ .glamo_mmc_use_slow = gta02_glamo_mci_use_slow,
+};
+
+static struct glamo_gpio_platform_data gta02_glamo_gpio_pdata = {
+ .base = GTA02_GPIO_GLAMO_BASE,
+ .registered = gta02_glamo_registered,
+};
+
+static struct glamo_platform_data gta02_glamo_pdata = {
+ .fb_data = &gta02_glamo_fb_pdata,
+ .mmc_data = &gta02_glamo_mmc_pdata,
+ .gpio_data = &gta02_glamo_gpio_pdata,
+
+ .osci_clock_rate = 32768,
+
+ .glamo_external_reset = gta02_glamo_external_reset,
+};
+
+static struct resource gta02_glamo_resources[] = {
+ [0] = {
+ .start = S3C2410_CS1,
+ .end = S3C2410_CS1 + 0x1000000 - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ [1] = {
+ .start = GTA02_IRQ_3D,
+ .end = GTA02_IRQ_3D,
+ .flags = IORESOURCE_IRQ,
+ },
+ [2] = {
+ .start = S3C2410_BOARD_IRQ_START,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device gta02_glamo_dev = {
+ .name = "glamo3362",
+ .num_resources = ARRAY_SIZE(gta02_glamo_resources),
+ .resource = gta02_glamo_resources,
+ .dev = {
+ .platform_data = &gta02_glamo_pdata,
+ },
+};
+
+static struct platform_device gta02_pm_gps_dev = {
+ .name = "gta02-pm-gps",
+};
+
+static struct platform_device gta02_pm_bt_dev = {
+ .name = "gta02-pm-bt",
+};
+
+static struct platform_device gta02_pm_gsm_dev = {
+ .name = "gta02-pm-gsm",
+};
+
+static struct platform_device gta02_pm_wlan_dev = {
+ .name = "gta02-pm-wlan",
+};
+
#ifdef CONFIG_CHARGER_PCF50633
/*
* On GTA02 the 1A charger features a 48K resistor to 0V on the ID pin.
@@ -161,6 +326,20 @@ static struct s3c2410_uartcfg gta02_uartcfgs[] = {
#define ADC_NOM_CHG_DETECT_1A 6
#define ADC_NOM_CHG_DETECT_USB 43
+static int gta02_get_charger_online_status(void)
+{
+ struct pcf50633 *pcf = gta02_pcf;
+
+ return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ONLINE;
+}
+
+static int gta02_get_charger_active_status(void)
+{
+ struct pcf50633 *pcf = gta02_pcf;
+
+ return pcf50633_mbc_get_status(pcf) & PCF50633_MBC_USB_ACTIVE;
+}
+
static void
gta02_configure_pmu_for_charger(struct pcf50633 *pcf, void *unused, int res)
{
@@ -237,6 +416,8 @@ static void gta02_udc_vbus_draw(unsigned int ma)
#else /* !CONFIG_CHARGER_PCF50633 */
#define gta02_pmu_event_callback NULL
#define gta02_udc_vbus_draw NULL
+#define gta02_get_charger_online_status NULL
+#define gta02_get_charger_active_status NULL
#endif
/*
@@ -254,6 +435,38 @@ static char *gta02_batteries[] = {
"battery",
};
+static struct regulator_consumer_supply ldo4_consumers[] = {
+ {
+ .dev = &gta02_pm_bt_dev.dev,
+ .supply = "BT_3V2",
+ },
+};
+
+static struct regulator_consumer_supply ldo5_consumers[] = {
+ {
+ .dev = &gta02_pm_gps_dev.dev,
+ .supply = "RF_3V",
+ },
+};
+
+static struct regulator_consumer_supply hcldo_consumers[] = {
+ {
+ .dev = &gta02_glamo_dev.dev,
+ .supply = "SD_3V3",
+ },
+};
+
+static struct regulator_consumer_supply ldo6_consumers[] = {
+ REGULATOR_SUPPLY("VDC", "spi2.0"),
+ REGULATOR_SUPPLY("VDDIO", "spi2.0"),
+};
+
+static struct pcf50633_bl_platform_data gta02_backlight_data = {
+ .default_brightness = 0x3f,
+ .default_brightness_limit = 0,
+ .ramp_time = 3,
+};
+
struct pcf50633_platform_data gta02_pcf_pdata = {
.resumers = {
[0] = PCF50633_INT1_USBINS |
@@ -268,12 +481,18 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
.batteries = gta02_batteries,
.num_batteries = ARRAY_SIZE(gta02_batteries),
+
+ .chg_ref_current_ma = 1000,
+
+ .backlight_data = &gta02_backlight_data,
+
.reg_init_data = {
[PCF50633_REGULATOR_AUTO] = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.always_on = 1,
.apply_uV = 1,
.state_mem = {
@@ -286,6 +505,7 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
.min_uV = 1300000,
.max_uV = 1600000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.always_on = 1,
.apply_uV = 1,
},
@@ -307,15 +527,19 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
.min_uV = 2000000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
- .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE,
+ .valid_ops_mask = REGULATOR_CHANGE_VOLTAGE |
+ REGULATOR_CHANGE_VOLTAGE,
.always_on = 1,
},
+ .num_consumer_supplies = ARRAY_SIZE(hcldo_consumers),
+ .consumer_supplies = hcldo_consumers,
},
[PCF50633_REGULATOR_LDO1] = {
.constraints = {
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
.state_mem = {
.enabled = 0,
@@ -327,6 +551,7 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
.min_uV = 3300000,
.max_uV = 3300000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
},
},
@@ -335,6 +560,7 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
.min_uV = 3000000,
.max_uV = 3000000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
},
},
@@ -343,32 +569,42 @@ struct pcf50633_platform_data gta02_pcf_pdata = {
.min_uV = 3200000,
.max_uV = 3200000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
},
+ .num_consumer_supplies = ARRAY_SIZE(ldo4_consumers),
+ .consumer_supplies = ldo4_consumers,
},
[PCF50633_REGULATOR_LDO5] = {
.constraints = {
.min_uV = 3000000,
.max_uV = 3000000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.apply_uV = 1,
.state_mem = {
.enabled = 1,
},
},
+ .num_consumer_supplies = ARRAY_SIZE(ldo5_consumers),
+ .consumer_supplies = ldo5_consumers,
},
[PCF50633_REGULATOR_LDO6] = {
.constraints = {
.min_uV = 3000000,
.max_uV = 3000000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
},
+ .num_consumer_supplies = ARRAY_SIZE(ldo6_consumers),
+ .consumer_supplies = ldo6_consumers,
},
[PCF50633_REGULATOR_MEMLDO] = {
.constraints = {
.min_uV = 1800000,
.max_uV = 1800000,
.valid_modes_mask = REGULATOR_MODE_NORMAL,
+ .valid_ops_mask = REGULATOR_CHANGE_STATUS,
.state_mem = {
.enabled = 1,
},
@@ -406,12 +642,6 @@ static struct platform_device gta02_nor_flash = {
.num_resources = 1,
};
-
-struct platform_device s3c24xx_pwm_device = {
- .name = "s3c24xx_pwm",
- .num_resources = 0,
-};
-
static struct i2c_board_info gta02_i2c_devs[] __initdata = {
{
I2C_BOARD_INFO("pcf50633", 0x73),
@@ -448,6 +678,7 @@ static struct s3c2410_platform_nand gta02_nand_info = {
.twrph1 = 15,
.nr_sets = ARRAY_SIZE(gta02_nand_sets),
.sets = gta02_nand_sets,
+ .software_ecc = 1,
};
@@ -456,11 +687,11 @@ static void gta02_udc_command(enum s3c2410_udc_cmd_e cmd)
switch (cmd) {
case S3C2410_UDC_P_ENABLE:
pr_debug("%s S3C2410_UDC_P_ENABLE\n", __func__);
- gpio_direction_output(GTA02_GPIO_USB_PULLUP, 1);
+ gpio_set_value(GTA02_GPIO_USB_PULLUP, 1);
break;
case S3C2410_UDC_P_DISABLE:
pr_debug("%s S3C2410_UDC_P_DISABLE\n", __func__);
- gpio_direction_output(GTA02_GPIO_USB_PULLUP, 0);
+ gpio_set_value(GTA02_GPIO_USB_PULLUP, 0);
break;
case S3C2410_UDC_P_RESET:
pr_debug("%s S3C2410_UDC_P_RESET\n", __func__);
@@ -475,81 +706,358 @@ static struct s3c2410_udc_mach_info gta02_udc_cfg = {
};
+/* USB */
+static struct s3c2410_hcd_info gta02_usb_info = {
+ .port[0] = {
+ .flags = S3C_HCDFLG_USED,
+ },
+ .port[1] = {
+ .flags = 0,
+ },
+};
+
+/* JBT6k74 display controller */
+static void gta02_jbt6k74_probe_completed(struct device *dev)
+{
+ pcf50633_bl_set_brightness_limit(gta02_pcf, 0x3f);
+}
+
+const struct jbt6k74_platform_data jbt6k74_pdata = {
+ .probe_completed = gta02_jbt6k74_probe_completed,
+ .gpio_reset = GTA02_GPIO_GLAMO(4),
+};
+
+static struct spi_board_info gta02_spi_board_info[] = {
+ {
+ .modalias = "jbt6k74",
+ .platform_data = &jbt6k74_pdata,
+ .controller_data = (void*)GTA02_GPIO_GLAMO(12),
+ /* irq */
+ .max_speed_hz = 100 * 1000,
+ .bus_num = 2,
+ .chip_select = 0
+ },
+};
+
+/* BQ27000 Battery */
+
+struct bq27000_platform_data bq27000_pdata = {
+ .name = "battery",
+ .rsense_mohms = 20,
+ .hdq_read = hdq_read,
+ .hdq_write = hdq_write,
+ .hdq_initialized = hdq_initialized,
+ .get_charger_online_status = gta02_get_charger_online_status,
+ .get_charger_active_status = gta02_get_charger_active_status
+};
+
+struct platform_device bq27000_battery_device = {
+ .name = "bq27000-battery",
+ .dev = {
+ .platform_data = &bq27000_pdata,
+ },
+};
+
+/* Platform battery */
+/* Capacity of a typical BL-5C dumb battery */
+#define GTA02_BAT_CHARGE_FULL 850000
-static void gta02_bl_set_intensity(int intensity)
+static int gta02_bat_voltscale(int volt)
+{
+ /* This table is suggested by SpeedEvil based on analysis of
+ * experimental data */
+ static const int lut[][2] = {
+ { 4120, 100 },
+ { 3900, 60 },
+ { 3740, 25 },
+ { 3600, 5 },
+ { 3000, 0 } };
+ int i, res = 0;
+
+ if (volt > lut[0][0])
+ res = lut[0][1];
+ else
+ for (i = 0; lut[i][1]; i++) {
+ if (volt <= lut[i][0] && volt >= lut[i+1][0]) {
+ res = lut[i][1] - (lut[i][0]-volt)*
+ (lut[i][1]-lut[i+1][1])/
+ (lut[i][0]-lut[i+1][0]);
+ break;
+ }
+ }
+ return res;
+}
+
+static int gta02_bat_get_voltage(void)
{
struct pcf50633 *pcf = gta02_pcf;
- int old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
+ u16 adc, mv = 0;
+ adc = pcf50633_adc_sync_read(pcf,
+ PCF50633_ADCC1_MUX_BATSNS_RES,
+ PCF50633_ADCC1_AVERAGE_16);
+ /* The formula from DS is for divide-by-two mode, current driver uses
+ divide-by-three */
+ mv = (adc * 6000) / 1023;
+ return mv * 1000;
+}
- /* We map 8-bit intensity to 6-bit intensity in hardware. */
- intensity >>= 2;
+static int gta02_bat_get_present(void)
+{
+ /* There is no reliable way to tell if it is present or not */
+ return 1;
+}
- /*
- * This can happen during, eg, print of panic on blanked console,
- * but we can't service i2c without interrupts active, so abort.
- */
- if (in_atomic()) {
- printk(KERN_ERR "gta02_bl_set_intensity called while atomic\n");
- return;
+static int gta02_bat_get_status(void)
+{
+#ifdef CONFIG_CHARGER_PCF50633
+ if (gta02_get_charger_active_status())
+ return POWER_SUPPLY_STATUS_CHARGING;
+ else
+ return POWER_SUPPLY_STATUS_DISCHARGING;
+#else
+ return POWER_SUPPLY_STATUS_UNKNOWN;
+#endif
+}
+
+static int gta02_bat_get_capacity(void)
+{
+ return gta02_bat_voltscale(gta02_bat_get_voltage()/1000);
+}
+
+static int gta02_bat_get_charge_full(void)
+{
+ return GTA02_BAT_CHARGE_FULL;
+}
+
+static int gta02_bat_get_charge_now(void)
+{
+ return gta02_bat_get_capacity() * gta02_bat_get_charge_full() / 100;
+}
+
+static enum power_supply_property gta02_platform_bat_properties[] = {
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_CHARGE_NOW,
+};
+
+int (*gta02_platform_bat_get_property[])(void) = {
+ gta02_bat_get_present,
+ gta02_bat_get_status,
+ gta02_bat_get_voltage,
+ gta02_bat_get_capacity,
+ gta02_bat_get_charge_full,
+ gta02_bat_get_charge_now,
+};
+
+static struct platform_bat_platform_data gta02_platform_bat_pdata = {
+ .name = "battery",
+ .properties = gta02_platform_bat_properties,
+ .num_properties = ARRAY_SIZE(gta02_platform_bat_properties),
+ .get_property = gta02_platform_bat_get_property,
+ .is_present = gta02_bat_get_present,
+};
+
+struct platform_device gta02_platform_bat = {
+ .name = "platform_battery",
+ .id = -1,
+ .dev = {
+ .platform_data = &gta02_platform_bat_pdata,
}
+};
- old_intensity = pcf50633_reg_read(pcf, PCF50633_REG_LEDOUT);
- if (intensity == old_intensity)
- return;
+/* HDQ */
- /* We can't do this anywhere else. */
- pcf50633_reg_write(pcf, PCF50633_REG_LEDDIM, 5);
+static void gta02_hdq_attach_child_devices(struct device *parent_device)
+{
+ bq27000_battery_device.dev.parent = parent_device;
+ platform_device_register(&bq27000_battery_device);
+}
- if (!(pcf50633_reg_read(pcf, PCF50633_REG_LEDENA) & 3))
- old_intensity = 0;
+static void gta02_hdq_gpio_direction_out(void)
+{
+ s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_OUTPUT);
+}
- /*
- * The PCF50633 cannot handle LEDOUT = 0 (datasheet p60)
- * if seen, you have to re-enable the LED unit.
- */
- if (!intensity || !old_intensity)
- pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 0);
+static void gta02_hdq_gpio_direction_in(void)
+{
+ s3c2410_gpio_cfgpin(GTA02v5_GPIO_HDQ, S3C2410_GPIO_INPUT);
+}
- /* Illegal to set LEDOUT to 0. */
- if (!intensity)
- pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f, 2);
- else
- pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_LEDOUT, 0x3f,
- intensity);
+static void gta02_hdq_gpio_set_value(int val)
+{
- if (intensity)
- pcf50633_reg_write(pcf, PCF50633_REG_LEDENA, 2);
+ s3c2410_gpio_setpin(GTA02v5_GPIO_HDQ, val);
+}
+static int gta02_hdq_gpio_get_value(void)
+{
+ return s3c2410_gpio_getpin(GTA02v5_GPIO_HDQ);
}
-static struct generic_bl_info gta02_bl_info = {
- .name = "gta02-bl",
- .max_intensity = 0xff,
- .default_intensity = 0xff,
- .set_bl_intensity = gta02_bl_set_intensity,
+static struct resource gta02_hdq_resources[] = {
+ [0] = {
+ .start = GTA02v5_GPIO_HDQ,
+ .end = GTA02v5_GPIO_HDQ,
+ },
+};
+
+/* Buttons */
+static struct gpio_keys_button gta02_buttons[] = {
+ {
+ .gpio = GTA02_GPIO_AUX_KEY,
+ .code = KEY_PHONE,
+ .desc = "Aux",
+ .type = EV_KEY,
+ .debounce_interval = 100,
+ },
+ {
+ .gpio = GTA02_GPIO_HOLD_KEY,
+ .code = KEY_PAUSE,
+ .desc = "Hold",
+ .type = EV_KEY,
+ .debounce_interval = 100,
+ },
+};
+
+static struct gpio_keys_platform_data gta02_buttons_pdata = {
+ .buttons = gta02_buttons,
+ .nbuttons = ARRAY_SIZE(gta02_buttons),
};
-static struct platform_device gta02_bl_dev = {
- .name = "generic-bl",
- .id = 1,
+static struct platform_device gta02_buttons_device = {
+ .name = "gpio-keys",
+ .id = -1,
.dev = {
- .platform_data = &gta02_bl_info,
+ .platform_data = &gta02_buttons_pdata,
},
};
+/* LEDs */
+static struct gpio_led gta02_gpio_leds[] = {
+ {
+ .name = "gta02:red:aux",
+ .gpio = GTA02_GPIO_AUX_LED,
+ },
+};
+static struct gpio_led_platform_data gta02_gpio_leds_pdata = {
+ .leds = gta02_gpio_leds,
+ .num_leds = ARRAY_SIZE(gta02_gpio_leds),
+};
-/* USB */
-static struct s3c2410_hcd_info gta02_usb_info = {
- .port[0] = {
- .flags = S3C_HCDFLG_USED,
+static struct platform_device gta02_leds_device = {
+ .name = "leds-gpio",
+ .id = -1,
+ .dev = {
+ .platform_data = &gta02_gpio_leds_pdata,
},
- .port[1] = {
- .flags = 0,
+};
+
+static struct led_pwm gta02_pwm_leds[] = {
+ {
+ .name = "gta02:orange:power",
+ .max_brightness = 0xff,
+ .pwm_period_ns = 1000000,
+ .pwm_id = 0,
+ },
+ {
+ .name = "gta02:blue:power",
+ .max_brightness = 0xff,
+ .pwm_period_ns = 1000000,
+ .pwm_id = 1,
},
+ {
+ .name = "gta02::vibrator",
+ .max_brightness = 0x3f,
+ .pwm_period_ns = 60000000,
+ .pwm_id = 3,
+ }
+};
+
+static struct led_pwm_platform_data gta02_pwm_leds_pdata = {
+ .num_leds = ARRAY_SIZE(gta02_pwm_leds),
+ .leds = gta02_pwm_leds,
+};
+
+static struct platform_device gta02_pwm_leds_device = {
+ .name = "leds_pwm",
+ .id = -1,
+ .dev = {
+ .platform_data = &gta02_pwm_leds_pdata,
+ }
+};
+
+/* Touchscreen configuration. */
+
+#ifdef CONFIG_TOUCHSCREEN_FILTER
+const static struct ts_filter_group_configuration gta02_ts_group = {
+ .length = 12,
+ .close_enough = 10,
+ .threshold = 6, /* At least half of the points in a group. */
+ .attempts = 10,
+};
+
+const static struct ts_filter_median_configuration gta02_ts_median = {
+ .extent = 20,
+ .decimation_below = 3,
+ .decimation_threshold = 8 * 3,
+ .decimation_above = 4,
+};
+
+const static struct ts_filter_mean_configuration gta02_ts_mean = {
+ .length = 4,
+};
+
+const static struct ts_filter_linear_configuration gta02_ts_linear = {
+ .constants = {1, 0, 0, 0, 1, 0, 1}, /* Don't modify coords. */
+ .coord0 = 0,
+ .coord1 = 1,
+};
+#endif
+
+const static struct ts_filter_chain_configuration gta02_filter_configuration[] =
+{
+#ifdef CONFIG_TOUCHSCREEN_FILTER
+ {&ts_filter_group_api, &gta02_ts_group.config},
+ {&ts_filter_median_api, &gta02_ts_median.config},
+ {&ts_filter_mean_api, &gta02_ts_mean.config},
+ {&ts_filter_linear_api, &gta02_ts_linear.config},
+#endif
+ {NULL, NULL},
+};
+
+const static struct s3c2410_ts_mach_info gta02_ts_cfg = {
+ .delay = 10000,
+ .presc = 0xff, /* slow as we can go */
+ .filter_config = gta02_filter_configuration,
};
+struct hdq_platform_data gta02_hdq_platform_data = {
+ .attach_child_devices = gta02_hdq_attach_child_devices,
+ .gpio_dir_out = gta02_hdq_gpio_direction_out,
+ .gpio_dir_in = gta02_hdq_gpio_direction_in,
+ .gpio_set = gta02_hdq_gpio_set_value,
+ .gpio_get = gta02_hdq_gpio_get_value,
+
+ .enable_fiq = gta02_fiq_enable,
+ .disable_fiq = gta02_fiq_disable,
+ .kick_fiq = gta02_fiq_kick,
+
+};
+
+struct platform_device gta02_hdq_device = {
+ .name = "hdq",
+ .num_resources = 1,
+ .resource = gta02_hdq_resources,
+ .dev = {
+ .platform_data = &gta02_hdq_platform_data,
+ .parent = &s3c_device_timer[2].dev,
+ },
+};
static void __init gta02_map_io(void)
{
@@ -568,15 +1076,28 @@ static struct platform_device *gta02_devices[] __initdata = {
&s3c_device_usbgadget,
&s3c_device_nand,
&gta02_nor_flash,
- &s3c24xx_pwm_device,
+ &s3c_device_timer[0],
+ &s3c_device_timer[1],
+ &s3c_device_timer[3],
&s3c_device_iis,
&s3c_device_i2c0,
+ &gta02_buttons_device,
+ &gta02_leds_device,
+ &gta02_pwm_leds_device,
+ &gta02_pm_gps_dev,
+ &gta02_pm_bt_dev,
+ &gta02_pm_gsm_dev,
+ &gta02_pm_wlan_dev,
+ &s3c_device_adc,
};
/* These guys DO need to be children of PMU. */
static struct platform_device *gta02_devices_pmu_children[] = {
- &gta02_bl_dev,
+ &s3c_device_ts,
+ &gta02_glamo_dev,
+ &s3c_device_timer[2],
+ &gta02_hdq_device,
};
@@ -609,11 +1130,106 @@ static void gta02_poweroff(void)
pcf50633_reg_set_bit_mask(gta02_pcf, PCF50633_REG_OOCSHDWN, 1, 1);
}
+/* On hardware rev 5 and earlier the leds are missing a resistor and reading
+ * from their gpio pins will always return 0, so we have to shadow the
+ * led states software */
+static unsigned long gpb_shadow;
+extern struct s3c_gpio_chip s3c24xx_gpios[];
+
+static void gta02_gpb_set(struct gpio_chip *chip,
+ unsigned offset, int value)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(S3C2410_GPB(0));
+ unsigned long flags;
+ unsigned long dat;
+
+ local_irq_save(flags);
+
+ dat = __raw_readl(base + 0x04) | gpb_shadow;
+ dat &= ~(1 << offset);
+ gpb_shadow &= ~(1 << offset);
+ if (value) {
+ dat |= 1 << offset;
+ switch (offset) {
+ case 0 ... 2:
+ gpb_shadow |= 1 << offset;
+ break;
+ default:
+ break;
+ }
+ }
+ __raw_writel(dat, base + 0x04);
+
+ local_irq_restore(flags);
+}
+
+static int gta02_gpb_get(struct gpio_chip *chip, unsigned offset)
+{
+ void __iomem *base = S3C24XX_GPIO_BASE(S3C2410_GPB(0));
+ unsigned long val;
+
+ val = __raw_readl(base + 0x04) | gpb_shadow;
+ val >>= offset;
+ val &= 1;
+
+ return val;
+}
+
+static void gta02_hijack_gpb(void)
+{
+/* Uncomment this, once support for S3C_SYSTEM_REV_ATAG has been merged
+ * upstream.
+ if (S3C_SYSTEM_REV_ATAG > GTA02v5_SYSTEM_REV)
+ return;
+*/
+
+ s3c24xx_gpios[1].chip.set = gta02_gpb_set;
+ s3c24xx_gpios[1].chip.get = gta02_gpb_get;
+}
+
+/*
+ * Allow the bootloader to enable hw ecc
+ * hardware_ecc=1|0
+ */
+static int __init hardware_ecc_setup(char *str)
+{
+ if (str && str[0] == '1')
+ gta02_nand_info.software_ecc = 0;
+ return 1;
+}
+__setup("hardware_ecc=", hardware_ecc_setup);
+
+static void gta02_request_gpios(void)
+{
+ int ret;
+ ret = gpio_request(GTA02_GPIO_USB_PULLUP, "USB pullup");
+ if (ret) {
+ printk(KERN_ERR "Failed to request USB pullup gpio pin: %d\n", ret);
+ } else {
+ ret = gpio_direction_output(GTA02_GPIO_USB_PULLUP, 0);
+ if (ret)
+ printk(KERN_ERR "Failed to set USB pullup gpio direction: %d\n", ret);
+ }
+}
+
+static void gta02_enable_pwm_pins(void)
+{
+ s3c2410_gpio_cfgpin(GTA02_GPIO_PWR_LED1, S3C2410_GPB0_TOUT0);
+ s3c2410_gpio_cfgpin(GTA02_GPIO_PWR_LED2, S3C2410_GPB1_TOUT1);
+ s3c2410_gpio_cfgpin(GTA02_GPIO_VIBRATOR_ON, S3C2410_GPB3_TOUT3);
+}
+
static void __init gta02_machine_init(void)
{
/* Set the panic callback to make AUX LED blink at ~5Hz. */
panic_blink = gta02_panic_blink;
+ s3c_device_ts.name = "s3c2440-ts";
+
+ gta02_hijack_gpb();
+
+ gta02_request_gpios();
+
s3c_pm_init();
#ifdef CONFIG_CHARGER_PCF50633
@@ -625,10 +1241,15 @@ static void __init gta02_machine_init(void)
s3c24xx_udc_set_platdata(&gta02_udc_cfg);
s3c_i2c0_set_platdata(NULL);
+ set_s3c2410ts_info(&gta02_ts_cfg);
i2c_register_board_info(0, gta02_i2c_devs, ARRAY_SIZE(gta02_i2c_devs));
+ spi_register_board_info(gta02_spi_board_info,
+ ARRAY_SIZE(gta02_spi_board_info));
platform_add_devices(gta02_devices, ARRAY_SIZE(gta02_devices));
+ gta02_enable_pwm_pins();
+
pm_power_off = gta02_poweroff;
}
diff --git a/arch/arm/plat-s3c/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h
index 0f540ea1e99..50d50a2f086 100644
--- a/arch/arm/plat-s3c/include/plat/devs.h
+++ b/arch/arm/plat-s3c/include/plat/devs.h
@@ -53,6 +53,8 @@ extern struct platform_device s3c_device_nand;
extern struct platform_device s3c_device_usbgadget;
extern struct platform_device s3c_device_usb_hsotg;
+extern struct platform_device s3c_device_ts;
+
/* s3c2440 specific devices */
#ifdef CONFIG_CPU_S3C2440
diff --git a/arch/arm/plat-s3c/include/plat/nand.h b/arch/arm/plat-s3c/include/plat/nand.h
index 18f958801e6..723ab032059 100644
--- a/arch/arm/plat-s3c/include/plat/nand.h
+++ b/arch/arm/plat-s3c/include/plat/nand.h
@@ -47,6 +47,7 @@ struct s3c2410_platform_nand {
int twrph1; /* time for release CLE/ALE from nWE/nOE inactive */
unsigned int ignore_unset_ecc:1;
+ unsigned int software_ecc:1; /* force software ecc at runtime */
int nr_sets;
struct s3c2410_nand_set *sets;
diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-s3c/include/plat/uncompress.h
index dc66a477f62..8e02073e307 100644
--- a/arch/arm/plat-s3c/include/plat/uncompress.h
+++ b/arch/arm/plat-s3c/include/plat/uncompress.h
@@ -37,6 +37,8 @@ static void arch_detect_cpu(void);
/* how many bytes we allow into the FIFO at a time in FIFO mode */
#define FIFO_MAX (14)
+#if CONFIG_S3C_LOWLEVEL_UART_PORT >= 0
+
#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT)
static __inline__ void
@@ -86,10 +88,6 @@ static void putc(int ch)
uart_wr(S3C2410_UTXH, ch);
}
-static inline void flush(void)
-{
-}
-
#define __raw_writel(d, ad) \
do { \
*((volatile unsigned int __force *)(ad)) = (d); \
@@ -163,6 +161,19 @@ static inline void arch_enable_uart_fifo(void)
#define arch_enable_uart_fifo() do { } while(0)
#endif
+#else
+static inline void putc(int ch)
+{
+}
+
+#define arch_enable_uart_fifo() do { } while(0)
+#define arch_decomp_wdog_start()
+#define arch_decomp_wdog()
+#endif
+
+static inline void flush(void)
+{
+}
static void
arch_decomp_setup(void)
diff --git a/arch/arm/plat-s3c/pwm.c b/arch/arm/plat-s3c/pwm.c
index 4fdc5b307fd..2a5275d98ca 100644
--- a/arch/arm/plat-s3c/pwm.c
+++ b/arch/arm/plat-s3c/pwm.c
@@ -21,6 +21,8 @@
#include <mach/irqs.h>
#include <mach/map.h>
+#include <mach/gpio.h>
+#include <mach/regs-gpio.h>
#include <plat/devs.h>
#include <plat/regs-timer.h>
@@ -40,6 +42,10 @@ struct pwm_device {
unsigned char running;
unsigned char use_count;
unsigned char pwm_id;
+
+ /* Used for saving state during suspend */
+ unsigned long tcon;
+ unsigned char routed_to_gpio:1;
};
#define pwm_dbg(_pwm, msg...) dev_dbg(&(_pwm)->pdev->dev, msg)
@@ -130,6 +136,7 @@ void pwm_free(struct pwm_device *pwm)
EXPORT_SYMBOL(pwm_free);
+#define pwm_tcon_mask(pwm) (0xf << (pwm->tcon_base))
#define pwm_tcon_start(pwm) (1 << (pwm->tcon_base + 0))
#define pwm_tcon_invert(pwm) (1 << (pwm->tcon_base + 2))
#define pwm_tcon_autoreload(pwm) (1 << (pwm->tcon_base + 3))
@@ -379,10 +386,75 @@ static int s3c_pwm_remove(struct platform_device *pdev)
return 0;
}
+#ifdef CONFIG_PM
+
+static int s3c_pwm_suspend(struct device *dev)
+{
+ struct pwm_device *pwm = dev_get_drvdata(dev);
+ unsigned int gpio_cfg = s3c2410_gpio_getcfg(S3C2410_GPB(pwm->pwm_id));
+
+ /* During suspend the pwm registers are reseted. If the invert bit is not
+ * set the output of TOUTn is high when the pwm is not active. In order to
+ * prevent spurious high output on the gpio at resume time, we stop routing
+ * the pwm signal to the gpio until tcon has been restored. */
+ if (gpio_cfg == S3C2410_GPIO_SFN2) {
+ s3c2410_gpio_cfgpin(S3C2410_GPB(pwm->pwm_id), S3C2410_GPIO_INPUT);
+ pwm->routed_to_gpio = 1;
+ } else {
+ pwm->routed_to_gpio = 0;
+ }
+
+ pwm->tcon = __raw_readl(S3C2410_TCON);
+
+ return 0;
+}
+
+static int s3c_pwm_resume(struct device *dev)
+{
+ struct pwm_device *pwm = dev_get_drvdata(dev);
+ unsigned long flags;
+ unsigned long tcon;
+ int duty_ns, period_ns;
+
+ duty_ns = pwm->duty_ns;
+ period_ns = pwm->period_ns;
+ pwm->duty_ns = -1;
+ pwm->period_ns = -1;
+ pwm_config(pwm, duty_ns, period_ns);
+
+ local_irq_save(flags);
+ tcon = __raw_readl(S3C2410_TCON);
+ tcon = __raw_readl(S3C2410_TCON);
+ tcon &= ~pwm_tcon_mask(pwm);
+ tcon |= pwm->tcon;
+ __raw_writel(tcon, S3C2410_TCON);
+ local_irq_restore(flags);
+
+ if (pwm->routed_to_gpio)
+ s3c2410_gpio_cfgpin(S3C2410_GPB(pwm->pwm_id), S3C2410_GPIO_SFN2);
+
+ return 0;
+}
+
+struct dev_pm_ops s3c_pwm_pm_ops = {
+ .suspend = s3c_pwm_suspend,
+ .resume = s3c_pwm_resume,
+ .freeze = s3c_pwm_suspend,
+ .thaw = s3c_pwm_resume,
+};
+
+#define S3C_PWM_PM_OPS (&s3c_pwm_pm_ops)
+
+#else
+#define S3C_PWM_PM_OPS NULL
+#endif
+
+
static struct platform_driver s3c_pwm_driver = {
.driver = {
.name = "s3c24xx-pwm",
.owner = THIS_MODULE,
+ .pm = S3C_PWM_PM_OPS,
},
.probe = s3c_pwm_probe,
.remove = __devexit_p(s3c_pwm_remove),
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index df47322492d..8c443153d05 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -46,6 +46,7 @@ struct s3c_adc_client {
int result;
unsigned char is_ts;
unsigned char channel;
+ unsigned int selected;
void (*select_cb)(struct s3c_adc_client *c, unsigned selected);
void (*convert_cb)(struct s3c_adc_client *c,
@@ -62,20 +63,31 @@ struct adc_device {
void __iomem *regs;
unsigned int prescale;
+ unsigned int delay;
int irq;
};
static struct adc_device *adc_dev;
+static struct work_struct resume_work;
+
static LIST_HEAD(adc_pending);
#define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
+#define AUTOPST (S3C2410_ADCTSC_YM_SEN | S3C2410_ADCTSC_YP_SEN | \
+ S3C2410_ADCTSC_XP_SEN | S3C2410_ADCTSC_AUTO_PST | \
+ S3C2410_ADCTSC_XY_PST(0))
+
static inline void s3c_adc_convert(struct adc_device *adc)
{
unsigned con = readl(adc->regs + S3C2410_ADCCON);
+ if (adc->cur->is_ts)
+ writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST,
+ adc->regs + S3C2410_ADCTSC);
+
con |= S3C2410_ADCCON_ENABLE_START;
writel(con, adc->regs + S3C2410_ADCCON);
}
@@ -85,7 +97,10 @@ static inline void s3c_adc_select(struct adc_device *adc,
{
unsigned con = readl(adc->regs + S3C2410_ADCCON);
- client->select_cb(client, 1);
+ if (!client->selected) {
+ client->selected = 1;
+ client->select_cb(client, 1);
+ }
con &= ~S3C2410_ADCCON_MUXMASK;
con &= ~S3C2410_ADCCON_STDBM;
@@ -109,12 +124,9 @@ static void s3c_adc_try(struct adc_device *adc)
{
struct s3c_adc_client *next = adc->ts_pend;
- if (!next && !list_empty(&adc_pending)) {
+ if (!next && !list_empty(&adc_pending))
next = list_first_entry(&adc_pending,
struct s3c_adc_client, pend);
- list_del(&next->pend);
- } else
- adc->ts_pend = NULL;
if (next) {
adc_dbg(adc, "new client is %p\n", next);
@@ -277,14 +289,20 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
if (client->nr_samples > 0) {
/* fire another conversion for this */
-
+ client->selected = 1;
client->select_cb(client, 1);
s3c_adc_convert(adc);
} else {
local_irq_save(flags);
- (client->select_cb)(client, 0);
+ client->selected = 0;
+ if (!adc->cur->is_ts)
+ list_del(&adc->cur->pend);
+ else
+ adc->ts_pend = NULL;
adc->cur = NULL;
+ (client->select_cb)(client, 0);
+
s3c_adc_try(adc);
local_irq_restore(flags);
}
@@ -307,6 +325,7 @@ static int s3c_adc_probe(struct platform_device *pdev)
adc->pdev = pdev;
adc->prescale = S3C2410_ADCCON_PRSCVL(49);
+ adc->delay = 0x2710;
adc->irq = platform_get_irq(pdev, 1);
if (adc->irq <= 0) {
@@ -346,6 +365,7 @@ static int s3c_adc_probe(struct platform_device *pdev)
writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
adc->regs + S3C2410_ADCCON);
+ writel(adc->delay, adc->regs + S3C2410_ADCDLY);
dev_info(dev, "attached adc driver\n");
@@ -389,18 +409,42 @@ static int s3c_adc_suspend(struct platform_device *pdev, pm_message_t state)
writel(con, adc->regs + S3C2410_ADCCON);
clk_disable(adc->clk);
+ disable_irq(IRQ_ADC);
+ if (!list_empty(&adc_pending) || adc->ts_pend)
+ dev_info(&pdev->dev, "We still have adc clients pending\n");
return 0;
}
+/* It seems this is not needed. This is under upstream review now. */
+static void adc_resume_work(struct work_struct *work)
+{
+ if (!adc_dev) /* Have no ADC here */
+ return;
+
+ if (!list_empty(&adc_pending) || adc_dev->ts_pend)
+ /* We still have adc clients pending */
+ s3c_adc_try(adc_dev);
+}
+
static int s3c_adc_resume(struct platform_device *pdev)
{
struct adc_device *adc = platform_get_drvdata(pdev);
+ enable_irq(IRQ_ADC);
clk_enable(adc->clk);
writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
adc->regs + S3C2410_ADCCON);
+ writel(adc->delay, adc->regs + S3C2410_ADCDLY);
+
+ /* Schedule task if there are clients pending. */
+ if (!list_empty(&adc_pending) || adc_dev->ts_pend) {
+ INIT_WORK(&resume_work, adc_resume_work);
+ if (!schedule_work(&resume_work))
+ dev_err(&pdev->dev,
+ "Failed to schedule adc_resume work!\n");
+ }
return 0;
}
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index f52a92ce8dd..9ef0e97d56e 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -30,6 +30,8 @@
#include <mach/irqs.h>
#include <asm/irq.h>
+#include <mach/ts.h>
+
#include <plat/regs-serial.h>
#include <plat/udc.h>
@@ -182,6 +184,24 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd)
}
}
+/* Touchscreen */
+
+struct platform_device s3c_device_ts = {
+ .name = "s3c2410-ts",
+ .id = -1,
+ .dev.parent = &s3c_device_adc.dev,
+};
+
+static struct s3c2410_ts_mach_info s3c2410ts_info;
+
+void set_s3c2410ts_info(const struct s3c2410_ts_mach_info *hard_s3c2410ts_info)
+{
+ memcpy(&s3c2410ts_info, hard_s3c2410ts_info,
+ sizeof(struct s3c2410_ts_mach_info));
+ s3c_device_ts.dev.platform_data = &s3c2410ts_info;
+}
+EXPORT_SYMBOL(set_s3c2410ts_info);
+
/* USB Device (Gadget)*/
static struct resource s3c_usbgadget_resource[] = {
diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c
index 6d7a961d326..c2dd900660b 100644
--- a/arch/arm/plat-s3c24xx/gpiolib.c
+++ b/arch/arm/plat-s3c24xx/gpiolib.c
@@ -26,6 +26,7 @@
#include <plat/pm.h>
#include <mach/regs-gpio.h>
+#include <mach/regs-gpioj.h>
static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset)
{
@@ -160,8 +161,16 @@ struct s3c_gpio_chip s3c24xx_gpios[] = {
.label = "GPIOH",
.ngpio = 11,
},
- },
-};
+ }, {
+ .base = S3C2440_GPJCON,
+ .pm = __gpio_pm(&s3c_gpio_pm_2bit),
+ .chip = {
+ .base = S3C2440_GPJ0,
+ .owner = THIS_MODULE,
+ .label = "GPIOJ",
+ .ngpio = 11,
+ },
+ },};
static __init int s3c24xx_gpiolib_init(void)
{
diff --git a/arch/arm/plat-s3c24xx/include/plat/irq.h b/arch/arm/plat-s3c24xx/include/plat/irq.h
index 69e1be8bec3..11a866466d8 100644
--- a/arch/arm/plat-s3c24xx/include/plat/irq.h
+++ b/arch/arm/plat-s3c24xx/include/plat/irq.h
@@ -12,6 +12,7 @@
#include <linux/io.h>
+#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/regs-irq.h>
#include <mach/regs-gpio.h>
@@ -31,8 +32,15 @@ s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
{
unsigned long mask;
unsigned long submask;
+#ifdef CONFIG_S3C2440_C_FIQ
+ unsigned long flags;
+#endif
submask = __raw_readl(S3C2410_INTSUBMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_save_flags(flags);
+ local_fiq_disable();
+#endif
mask = __raw_readl(S3C2410_INTMSK);
submask |= (1UL << (irqno - IRQ_S3CUART_RX0));
@@ -45,6 +53,9 @@ s3c_irqsub_mask(unsigned int irqno, unsigned int parentbit,
/* write back masks */
__raw_writel(submask, S3C2410_INTSUBMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_irq_restore(flags);
+#endif
}
@@ -53,8 +64,15 @@ s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
{
unsigned long mask;
unsigned long submask;
+#ifdef CONFIG_S3C2440_C_FIQ
+ unsigned long flags;
+#endif
submask = __raw_readl(S3C2410_INTSUBMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_save_flags(flags);
+ local_fiq_disable();
+#endif
mask = __raw_readl(S3C2410_INTMSK);
submask &= ~(1UL << (irqno - IRQ_S3CUART_RX0));
@@ -63,6 +81,9 @@ s3c_irqsub_unmask(unsigned int irqno, unsigned int parentbit)
/* write back masks */
__raw_writel(submask, S3C2410_INTSUBMSK);
__raw_writel(mask, S3C2410_INTMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_irq_restore(flags);
+#endif
}
diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c
index d02f5f02045..14aa528d985 100644
--- a/arch/arm/plat-s3c24xx/irq.c
+++ b/arch/arm/plat-s3c24xx/irq.c
@@ -28,6 +28,8 @@
#include <asm/mach/irq.h>
#include <plat/regs-irqtype.h>
+#include <mach/regs-irq.h>
+#include <mach/regs-gpio.h>
#include <plat/cpu.h>
#include <plat/pm.h>
@@ -37,12 +39,20 @@ static void
s3c_irq_mask(unsigned int irqno)
{
unsigned long mask;
-
+#ifdef CONFIG_S3C2440_C_FIQ
+ unsigned long flags;
+#endif
irqno -= IRQ_EINT0;
-
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_save_flags(flags);
+ local_fiq_disable();
+#endif
mask = __raw_readl(S3C2410_INTMSK);
mask |= 1UL << irqno;
__raw_writel(mask, S3C2410_INTMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_irq_restore(flags);
+#endif
}
static inline void
@@ -59,9 +69,19 @@ s3c_irq_maskack(unsigned int irqno)
{
unsigned long bitval = 1UL << (irqno - IRQ_EINT0);
unsigned long mask;
+#ifdef CONFIG_S3C2440_C_FIQ
+ unsigned long flags;
+#endif
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_save_flags(flags);
+ local_fiq_disable();
+#endif
mask = __raw_readl(S3C2410_INTMSK);
__raw_writel(mask|bitval, S3C2410_INTMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_irq_restore(flags);
+#endif
__raw_writel(bitval, S3C2410_SRCPND);
__raw_writel(bitval, S3C2410_INTPND);
@@ -72,15 +92,25 @@ static void
s3c_irq_unmask(unsigned int irqno)
{
unsigned long mask;
+#ifdef CONFIG_S3C2440_C_FIQ
+ unsigned long flags;
+#endif
if (irqno != IRQ_TIMER4 && irqno != IRQ_EINT8t23)
irqdbf2("s3c_irq_unmask %d\n", irqno);
irqno -= IRQ_EINT0;
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_save_flags(flags);
+ local_fiq_disable();
+#endif
mask = __raw_readl(S3C2410_INTMSK);
mask &= ~(1UL << irqno);
__raw_writel(mask, S3C2410_INTMSK);
+#ifdef CONFIG_S3C2440_C_FIQ
+ local_irq_restore(flags);
+#endif
}
struct irq_chip s3c_irq_level_chip = {
@@ -559,26 +589,26 @@ void __init s3c24xx_init_irq(void)
last = 0;
for (i = 0; i < 4; i++) {
- pend = __raw_readl(S3C2410_INTPND);
+ pend = __raw_readl(S3C2410_SUBSRCPND);
if (pend == 0 || pend == last)
break;
- __raw_writel(pend, S3C2410_SRCPND);
- __raw_writel(pend, S3C2410_INTPND);
- printk("irq: clearing pending status %08x\n", (int)pend);
+ printk("irq: clearing subpending status %08x\n", (int)pend);
+ __raw_writel(pend, S3C2410_SUBSRCPND);
last = pend;
}
last = 0;
for (i = 0; i < 4; i++) {
- pend = __raw_readl(S3C2410_SUBSRCPND);
+ pend = __raw_readl(S3C2410_INTPND);
if (pend == 0 || pend == last)
break;
- printk("irq: clearing subpending status %08x\n", (int)pend);
- __raw_writel(pend, S3C2410_SUBSRCPND);
+ __raw_writel(pend, S3C2410_SRCPND);
+ __raw_writel(pend, S3C2410_INTPND);
+ printk("irq: clearing pending status %08x\n", (int)pend);
last = pend;
}
diff --git a/drivers/input/misc/pcf50633-input.c b/drivers/input/misc/pcf50633-input.c
index 039dcb00ebd..008de0c5834 100644
--- a/drivers/input/misc/pcf50633-input.c
+++ b/drivers/input/misc/pcf50633-input.c
@@ -55,7 +55,6 @@ pcf50633_input_irq(int irq, void *data)
static int __devinit pcf50633_input_probe(struct platform_device *pdev)
{
struct pcf50633_input *input;
- struct pcf50633_subdev_pdata *pdata = pdev->dev.platform_data;
struct input_dev *input_dev;
int ret;
@@ -71,7 +70,7 @@ static int __devinit pcf50633_input_probe(struct platform_device *pdev)
}
platform_set_drvdata(pdev, input);
- input->pcf = pdata->pcf;
+ input->pcf = dev_to_pcf50633(pdev->dev.parent);
input->input_dev = input_dev;
input_dev->name = "PCF50633 PMU events";
@@ -85,9 +84,9 @@ static int __devinit pcf50633_input_probe(struct platform_device *pdev)
kfree(input);
return ret;
}
- pcf50633_register_irq(pdata->pcf, PCF50633_IRQ_ONKEYR,
+ pcf50633_register_irq(input->pcf, PCF50633_IRQ_ONKEYR,
pcf50633_input_irq, input);
- pcf50633_register_irq(pdata->pcf, PCF50633_IRQ_ONKEYF,
+ pcf50633_register_irq(input->pcf, PCF50633_IRQ_ONKEYF,
pcf50633_input_irq, input);
return 0;
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig
index 8cc453c85ea..ac11fd783a7 100644
--- a/drivers/input/touchscreen/Kconfig
+++ b/drivers/input/touchscreen/Kconfig
@@ -11,6 +11,69 @@ menuconfig INPUT_TOUCHSCREEN
if INPUT_TOUCHSCREEN
+menuconfig TOUCHSCREEN_FILTER
+ boolean "Touchscreen Filtering"
+ depends on INPUT_TOUCHSCREEN
+ select TOUCHSCREEN_FILTER_GROUP
+ select TOUCHSCREEN_FILTER_MEDIAN
+ select TOUCHSCREEN_FILTER_MEAN
+ select TOUCHSCREEN_FILTER_LINEAR
+ help
+ Select this to include kernel touchscreen filter support. The filters
+ can be combined in any order in your machine init and the parameters
+ for them can also be set there.
+
+config TOUCHSCREEN_FILTER_GROUP
+ bool "Group Touchscreen Filter"
+ depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
+ default Y
+ help
+ Say Y here if you want to use the Group touchscreen filter, it
+ avoids using atypical samples.
+
+config TOUCHSCREEN_FILTER_MEDIAN
+ bool "Median Average Touchscreen Filter"
+ depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
+ default Y
+ help
+ Say Y here if you want to use the Median touchscreen filter, it's
+ highly effective if you data is noisy with occasional excursions.
+
+config TOUCHSCREEN_FILTER_MEAN
+ bool "Mean Average Touchscreen Filter"
+ depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
+ default Y
+ help
+ Say Y here if you want to use the Mean touchscreen filter, it
+ can further improve decent quality data by removing jitter
+
+config TOUCHSCREEN_FILTER_LINEAR
+ bool "Linear Touchscreen Filter"
+ depends on INPUT_TOUCHSCREEN && TOUCHSCREEN_FILTER
+ default Y
+ help
+ Say Y here if you want to use the Linear touchscreen filter, it
+ enables the use of calibration data for the touchscreen.
+
+config TOUCHSCREEN_S3C2410
+ tristate "Samsung S3C2410 touchscreen input driver"
+ depends on ARCH_S3C2410 && INPUT && INPUT_TOUCHSCREEN
+ select S3C24XX_ADC
+ select SERIO
+ help
+ Say Y here if you have the s3c2410 touchscreen.
+
+ If unsure, say N.
+
+ To compile this driver as a module, choose M here: the
+ module will be called s3c2410_ts.
+
+config TOUCHSCREEN_S3C2410_DEBUG
+ boolean "Samsung S3C2410 touchscreen debug messages"
+ depends on TOUCHSCREEN_S3C2410
+ help
+ Select this if you want debug messages
+
config TOUCHSCREEN_ADS7846
tristate "ADS7846/TSC2046 and ADS7843 based touchscreens"
depends on SPI_MASTER
diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile
index 15fa62cffc7..453477fe012 100644
--- a/drivers/input/touchscreen/Makefile
+++ b/drivers/input/touchscreen/Makefile
@@ -42,3 +42,9 @@ obj-$(CONFIG_TOUCHSCREEN_WM97XX_MAINSTONE) += mainstone-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_WM97XX_ZYLONITE) += zylonite-wm97xx.o
obj-$(CONFIG_TOUCHSCREEN_W90X900) += w90p910_ts.o
obj-$(CONFIG_TOUCHSCREEN_PCAP) += pcap_ts.o
+obj-$(CONFIG_TOUCHSCREEN_FILTER) += ts_filter_chain.o
+obj-$(CONFIG_TOUCHSCREEN_FILTER_GROUP) += ts_filter_group.o
+obj-$(CONFIG_TOUCHSCREEN_FILTER_LINEAR) += ts_filter_linear.o
+obj-$(CONFIG_TOUCHSCREEN_FILTER_MEDIAN) += ts_filter_median.o
+obj-$(CONFIG_TOUCHSCREEN_FILTER_MEAN) += ts_filter_mean.o
+obj-$(CONFIG_TOUCHSCREEN_S3C2410) += s3c2410_ts.o
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
new file mode 100644
index 00000000000..97def9d620e
--- /dev/null
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -0,0 +1,552 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2004 Arnaud Patard <arnaud.patard@rtp-net.org>
+ * iPAQ H1940 touchscreen support
+ *
+ * ChangeLog
+ *
+ * 2004-09-05: Herbert Pötzl <herbert@13thfloor.at>
+ * - Added clock (de-)allocation code
+ *
+ * 2005-03-06: Arnaud Patard <arnaud.patard@rtp-net.org>
+ * - h1940_ -> s3c2410 (this driver is now also used on the n30
+ * machines :P)
+ * - Debug messages are now enabled with the config option
+ * TOUCHSCREEN_S3C2410_DEBUG
+ * - Changed the way the value are read
+ * - Input subsystem should now work
+ * - Use ioremap and readl/writel
+ *
+ * 2005-03-23: Arnaud Patard <arnaud.patard@rtp-net.org>
+ * - Make use of some undocumented features of the touchscreen
+ * controller
+ *
+ * 2007-05-23: Harald Welte <laforge@openmoko.org>
+ * - Add proper support for S32440
+ *
+ * 2008-06-23: Andy Green <andy@warmcat.com>
+ * - Removed averaging system
+ * - Added generic Touchscreen filter stuff
+ *
+ * 2008-11-27: Nelson Castillo <arhuaco@freaks-unidos.net>
+ * - Improve interrupt handling
+ *
+ * 2009-04-09: Nelson Castillo <arhuaco@freaks-unidos.net>
+ * - Use s3c-adc API (Vasily Khoruzhick <anarsoul@gmail.com> provided
+ * a working example for a simpler version of this driver).
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/slab.h>
+#include <linux/input.h>
+#include <linux/init.h>
+#include <linux/serio.h>
+#include <linux/timer.h>
+#include <linux/kfifo.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+#include <asm/irq.h>
+
+#include <mach/regs-gpio.h>
+#include <mach/gpio-nrs.h>
+#include <mach/gpio-fns.h>
+#include <mach/ts.h>
+#include <mach/hardware.h>
+#include <plat/regs-adc.h>
+#include <plat/adc.h>
+
+#include <linux/input/touchscreen/ts_filter_chain.h>
+
+/* For ts.dev.id.version */
+#define S3C2410TSVERSION 0x0101
+
+#define WAIT4INT(x) (((x)<<8) | \
+ S3C2410_ADCTSC_YM_SEN | \
+ S3C2410_ADCTSC_YP_SEN | \
+ S3C2410_ADCTSC_XP_SEN | \
+ S3C2410_ADCTSC_XY_PST(3))
+
+#define TSPRINTK(fmt, args...) \
+ printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+# define DPRINTK TSPRINTK
+#else
+# define DPRINTK(fmt, args...)
+#endif
+
+
+MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
+MODULE_DESCRIPTION("s3c2410 touchscreen driver");
+MODULE_LICENSE("GPL");
+
+/*
+ * Definitions & global arrays.
+ */
+
+static char *s3c2410ts_name = "s3c2410 TouchScreen";
+
+#define TS_RELEASE_TIMEOUT (HZ >> 7 ? HZ >> 7 : 1) /* 8ms (5ms if HZ is 200) */
+#define TS_EVENT_FIFO_SIZE (2 << 6) /* Must be a power of 2. */
+
+/*
+ * Per-touchscreen data.
+ */
+
+enum ts_state {TS_STATE_STANDBY, TS_STATE_PRESSED, TS_STATE_RELEASE_PENDING,
+ TS_STATE_RELEASE};
+
+struct s3c2410ts {
+ struct input_dev *dev;
+ struct ts_filter_chain *chain;
+ enum ts_state state;
+ int is_down;
+ struct kfifo *event_fifo;
+ struct s3c_adc_client *adc_client;
+ unsigned adc_selected;
+};
+
+static struct s3c2410ts ts;
+
+static void __iomem *base_addr;
+
+/*
+ * A few low level functions.
+ */
+
+static inline void s3c2410_ts_connect(void)
+{
+ s3c2410_gpio_cfgpin(S3C2410_GPG(12), S3C2410_GPG12_XMON);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(13), S3C2410_GPG13_nXPON);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(14), S3C2410_GPG14_YMON);
+ s3c2410_gpio_cfgpin(S3C2410_GPG(15), S3C2410_GPG15_nYPON);
+}
+
+/*
+ * Code that starts ADC conversions.
+ */
+
+static void ts_adc_timer_f(unsigned long data);
+static struct timer_list ts_adc_timer = TIMER_INITIALIZER(ts_adc_timer_f, 0, 0);
+
+static void ts_adc_timer_f(unsigned long data)
+{
+ if (s3c_adc_start(ts.adc_client, 0, 1))
+ mod_timer(&ts_adc_timer, jiffies + 1);
+}
+
+static void s3c2410_ts_start_adc_conversion(void)
+{
+ if (ts.adc_selected)
+ mod_timer(&ts_adc_timer, jiffies + 1);
+ else
+ ts_adc_timer_f(0);
+}
+
+/* Callback for the s3c-adc API. */
+void adc_selected_f(struct s3c_adc_client *client, unsigned selected)
+{
+ ts.adc_selected = selected;
+}
+
+/*
+ * Just send the input events.
+ */
+
+enum ts_input_event {IE_DOWN = 0, IE_UP};
+
+static void ts_input_report(int event, int coords[])
+{
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+ static char *s[] = {"down", "up"};
+ struct timeval tv;
+
+ do_gettimeofday(&tv);
+#endif
+
+ if (event == IE_DOWN) {
+ input_report_abs(ts.dev, ABS_X, coords[0]);
+ input_report_abs(ts.dev, ABS_Y, coords[1]);
+ input_report_key(ts.dev, BTN_TOUCH, 1);
+ input_report_abs(ts.dev, ABS_PRESSURE, 1);
+
+ DPRINTK("T:%06d %6s (X:%03d, Y:%03d)\n",
+ (int)tv.tv_usec, s[event], coords[0], coords[1]);
+ } else {
+ input_report_key(ts.dev, BTN_TOUCH, 0);
+ input_report_abs(ts.dev, ABS_PRESSURE, 0);
+
+ DPRINTK("T:%06d %6s\n",
+ (int)tv.tv_usec, s[event]);
+ }
+
+ input_sync(ts.dev);
+}
+
+/*
+ * Manage the state of the touchscreen.
+ */
+
+static void event_send_timer_f(unsigned long data);
+
+static struct timer_list event_send_timer =
+ TIMER_INITIALIZER(event_send_timer_f, 0, 0);
+
+static void event_send_timer_f(unsigned long data)
+{
+ static int noop_counter;
+ int event_type;
+
+ while (__kfifo_get(ts.event_fifo, (unsigned char *)&event_type,
+ sizeof(int))) {
+ int buf[2];
+
+ switch (event_type) {
+ case 'D':
+ if (ts.state == TS_STATE_RELEASE_PENDING)
+ /* Ignore short UP event. */
+ ts.state = TS_STATE_PRESSED;
+ break;
+
+ case 'U':
+ ts.state = TS_STATE_RELEASE_PENDING;
+ break;
+
+ case 'P':
+ if (ts.is_down) /* Stylus_action needs a conversion. */
+ s3c2410_ts_start_adc_conversion();
+
+ if (unlikely(__kfifo_get(ts.event_fifo,
+ (unsigned char *)buf,
+ sizeof(int) * 2)
+ != sizeof(int) * 2)) {
+ /* This will only happen if we have a bug. */
+ TSPRINTK("Invalid packet\n");
+ return;
+ }
+
+ ts_input_report(IE_DOWN, buf);
+ ts.state = TS_STATE_PRESSED;
+ break;
+ }
+
+ noop_counter = 0;
+ }
+
+ if (noop_counter++ >= 1) {
+ noop_counter = 0;
+ if (ts.state == TS_STATE_RELEASE_PENDING) {
+ /*
+ * We delay the UP event for a while to avoid jitter.
+ * If we get a DOWN event we do not send it.
+ */
+ ts_input_report(IE_UP, NULL);
+ ts.state = TS_STATE_STANDBY;
+
+ ts_filter_chain_clear(ts.chain);
+ }
+ } else {
+ mod_timer(&event_send_timer, jiffies + TS_RELEASE_TIMEOUT);
+ }
+}
+
+/*
+ * Manage interrupts.
+ */
+
+static irqreturn_t stylus_updown(int irq, void *dev_id)
+{
+ unsigned long data0;
+ unsigned long data1;
+ int event_type;
+
+ data0 = readl(base_addr + S3C2410_ADCDAT0);
+ data1 = readl(base_addr + S3C2410_ADCDAT1);
+
+ ts.is_down = !(data0 & S3C2410_ADCDAT0_UPDOWN) &&
+ !(data1 & S3C2410_ADCDAT0_UPDOWN);
+
+ event_type = ts.is_down ? 'D' : 'U';
+
+ if (unlikely(__kfifo_put(ts.event_fifo, (unsigned char *)&event_type,
+ sizeof(int)) != sizeof(int)))
+ /* Only happens if we have a bug. */
+ TSPRINTK("FIFO full\n");
+
+ if (ts.is_down)
+ s3c2410_ts_start_adc_conversion();
+ else
+ writel(WAIT4INT(0), base_addr + S3C2410_ADCTSC);
+
+ mod_timer(&event_send_timer, jiffies + 1);
+
+ return IRQ_HANDLED;
+}
+
+static void stylus_adc_action(struct s3c_adc_client *client, unsigned p0, unsigned p1, unsigned *conv_left)
+{
+ int buf[3];
+
+ /* TODO: Do we really need this? */
+ if (p0 & S3C2410_ADCDAT0_AUTO_PST ||
+ p1 & S3C2410_ADCDAT1_AUTO_PST) {
+ *conv_left = 1;
+ return;
+ }
+
+ buf[1] = p0;
+ buf[2] = p1;
+
+ switch (ts_filter_chain_feed(ts.chain, &buf[1])) {
+ case 0:
+ /* The filter wants more points. */
+ *conv_left = 1;
+ return;
+ case 1:
+ /* We have a point from the filters or no filtering enabled. */
+ buf[0] = 'P';
+ break;
+ default:
+ TSPRINTK("invalid return value\n");
+ case -1:
+ /* Too much noise. Ignore the event. */
+ ts_filter_chain_clear(ts.chain);
+ writel(WAIT4INT(1), base_addr + S3C2410_ADCTSC);
+ return;
+ };
+
+ if (unlikely(__kfifo_put(ts.event_fifo, (unsigned char *)buf,
+ sizeof(int) * 3) != sizeof(int) * 3))
+ /* This will only happen if we have a bug. */
+ TSPRINTK("FIFO full\n");
+
+ writel(WAIT4INT(1), base_addr + S3C2410_ADCTSC);
+ mod_timer(&event_send_timer, jiffies + 1);
+
+ return;
+}
+
+/*
+ * The functions for inserting/removing us as a module.
+ */
+
+static int __init s3c2410ts_probe(struct platform_device *pdev)
+{
+ int rc;
+ struct s3c2410_ts_mach_info *info;
+ struct input_dev *input_dev;
+ int ret = 0;
+
+ dev_info(&pdev->dev, "Starting\n");
+
+ info = (struct s3c2410_ts_mach_info *)pdev->dev.platform_data;
+
+ if (!info) {
+ dev_err(&pdev->dev, "No platform data\n");
+ return -EINVAL;
+ }
+
+ base_addr = ioremap(S3C2410_PA_ADC, 0x20);
+ if (base_addr == NULL) {
+ dev_err(&pdev->dev, "Failed to remap register block\n");
+ ret = -ENOMEM;
+ goto bail0;
+ }
+
+ /* If we acutally are a S3C2410: Configure GPIOs */
+ if (!strcmp(pdev->name, "s3c2410-ts"))
+ s3c2410_ts_connect();
+
+ writel(WAIT4INT(0), base_addr + S3C2410_ADCTSC);
+
+ /* Initialise input stuff */
+ memset(&ts, 0, sizeof(struct s3c2410ts));
+
+ ts.adc_client =
+ s3c_adc_register(pdev, adc_selected_f, stylus_adc_action, 1);
+ if (!ts.adc_client) {
+ dev_err(&pdev->dev,
+ "Unable to register s3c2410_ts as s3_adc client\n");
+ iounmap(base_addr);
+ ret = -EIO;
+ goto bail0;
+ }
+
+ input_dev = input_allocate_device();
+ if (!input_dev) {
+ dev_err(&pdev->dev, "Unable to allocate the input device\n");
+ ret = -ENOMEM;
+ goto bail1;
+ }
+
+ ts.dev = input_dev;
+ ts.dev->evbit[0] = BIT_MASK(EV_SYN) | BIT_MASK(EV_KEY) |
+ BIT_MASK(EV_ABS);
+ ts.dev->keybit[BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH);
+ input_set_abs_params(ts.dev, ABS_X, 0, 0x3FF, 0, 0);
+ input_set_abs_params(ts.dev, ABS_Y, 0, 0x3FF, 0, 0);
+ input_set_abs_params(ts.dev, ABS_PRESSURE, 0, 1, 0, 0);
+
+ ts.dev->name = s3c2410ts_name;
+ ts.dev->id.bustype = BUS_RS232;
+ ts.dev->id.vendor = 0xDEAD;
+ ts.dev->id.product = 0xBEEF;
+ ts.dev->id.version = S3C2410TSVERSION;
+ ts.state = TS_STATE_STANDBY;
+ ts.event_fifo = kfifo_alloc(TS_EVENT_FIFO_SIZE, GFP_KERNEL, NULL);
+ if (IS_ERR(ts.event_fifo)) {
+ ret = -EIO;
+ goto bail2;
+ }
+
+ /* Create the filter chain set up for the 2 coordinates we produce. */
+ ts.chain = ts_filter_chain_create(pdev, info->filter_config, 2);
+
+ if (IS_ERR(ts.chain))
+ goto bail2;
+
+ ts_filter_chain_clear(ts.chain);
+
+ /* Get IRQ. */
+ if (request_irq(IRQ_TC, stylus_updown, 0, "s3c2410_action", ts.dev)) {
+ dev_err(&pdev->dev, "Could not allocate ts IRQ_TC !\n");
+ iounmap(base_addr);
+ ret = -EIO;
+ goto bail3;
+ }
+
+ dev_info(&pdev->dev, "Successfully loaded\n");
+
+ /* All went ok. Register to the input system. */
+ rc = input_register_device(ts.dev);
+ if (rc) {
+ dev_info(&pdev->dev, "Could not register input device\n");
+ ret = -EIO;
+ goto bail4;
+ }
+
+ return 0;
+
+bail4:
+ free_irq(IRQ_TC, ts.dev);
+ iounmap(base_addr);
+ disable_irq(IRQ_TC);
+bail3:
+ ts_filter_chain_destroy(ts.chain);
+ kfifo_free(ts.event_fifo);
+bail2:
+ input_unregister_device(ts.dev);
+bail1:
+ iounmap(base_addr);
+bail0:
+
+ return ret;
+}
+
+static int s3c2410ts_remove(struct platform_device *pdev)
+{
+ disable_irq(IRQ_TC);
+ free_irq(IRQ_TC, ts.dev);
+
+ s3c_adc_release(ts.adc_client);
+ input_unregister_device(ts.dev);
+ iounmap(base_addr);
+
+ ts_filter_chain_destroy(ts.chain);
+
+ kfifo_free(ts.event_fifo);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+#define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | \
+ S3C2410_ADCTSC_XY_PST(0))
+
+static int s3c2410ts_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ writel(TSC_SLEEP, base_addr + S3C2410_ADCTSC);
+ writel(readl(base_addr + S3C2410_ADCCON) | S3C2410_ADCCON_STDBM,
+ base_addr + S3C2410_ADCCON);
+ disable_irq(IRQ_TC);
+
+ return 0;
+}
+
+static int s3c2410ts_resume(struct platform_device *pdev)
+{
+ ts_filter_chain_clear(ts.chain);
+ enable_irq(IRQ_TC);
+ writel(WAIT4INT(0), base_addr + S3C2410_ADCTSC);
+
+ return 0;
+}
+
+#else
+#define s3c2410ts_suspend NULL
+#define s3c2410ts_resume NULL
+#endif
+
+static struct platform_driver s3c2410ts_driver = {
+ .driver = {
+ .name = "s3c2410-ts",
+ .owner = THIS_MODULE,
+ },
+ .probe = s3c2410ts_probe,
+ .remove = s3c2410ts_remove,
+ .suspend = s3c2410ts_suspend,
+ .resume = s3c2410ts_resume,
+};
+
+static struct platform_driver s3c2440ts_driver = {
+ .driver = {
+ .name = "s3c2440-ts",
+ .owner = THIS_MODULE,
+ },
+ .probe = s3c2410ts_probe,
+ .remove = s3c2410ts_remove,
+ .suspend = s3c2410ts_suspend,
+ .resume = s3c2410ts_resume,
+};
+
+static int __init s3c2410ts_init(void)
+{
+ int rc;
+
+ rc = platform_driver_register(&s3c2410ts_driver);
+ if (rc < 0)
+ return rc;
+
+ rc = platform_driver_register(&s3c2440ts_driver);
+ if (rc < 0)
+ platform_driver_unregister(&s3c2410ts_driver);
+
+ return rc;
+}
+
+static void __exit s3c2410ts_exit(void)
+{
+ platform_driver_unregister(&s3c2440ts_driver);
+ platform_driver_unregister(&s3c2410ts_driver);
+}
+
+module_init(s3c2410ts_init);
+module_exit(s3c2410ts_exit);
+
diff --git a/drivers/input/touchscreen/ts_filter_chain.c b/drivers/input/touchscreen/ts_filter_chain.c
new file mode 100644
index 00000000000..8b5e2145b27
--- /dev/null
+++ b/drivers/input/touchscreen/ts_filter_chain.c
@@ -0,0 +1,183 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2008,2009 Andy Green <andy@warmcat.com>
+ */
+
+#include <linux/kernel.h>
+#include <linux/device.h>
+
+#include <linux/input/touchscreen/ts_filter_chain.h>
+#include <linux/input/touchscreen/ts_filter.h>
+
+/*
+ * Tux, would you like the following function in /lib?
+ * It helps us avoid silly code.
+ */
+
+/**
+ * sptrlen - Count how many non-null pointers are in a pointer array
+ * @arr: The array of pointers
+ */
+static int sptrlen(const void *arr)
+{
+ /* All pointers have the same size. */
+ const int **p = (const int **)arr;
+ int len = 0;
+
+ while (*(p++))
+ len++;
+
+ return len;
+}
+
+
+struct ts_filter_chain {
+ /* All of the filters. */
+ struct ts_filter **arr;
+ /* Filters that can propagate values in the chain. */
+ struct ts_filter **pchain;
+ /* Length of the pchain array. */
+ int pchain_len;
+ /* FIXME: Add a spinlock and use it. */
+};
+
+struct ts_filter_chain *ts_filter_chain_create(
+ struct platform_device *pdev,
+ const struct ts_filter_chain_configuration conf[],
+ int count_coords)
+{
+ struct ts_filter_chain *c;
+ int count = 0;
+ int len;
+
+ BUG_ON((count_coords < 1));
+ BUG_ON(count_coords > MAX_TS_FILTER_COORDS);
+
+ c = kzalloc(sizeof(struct ts_filter_chain), GFP_KERNEL);
+ if (!c)
+ goto create_err_1;
+
+ len = (sptrlen(conf) + 1);
+ /* Memory for two null-terminated arrays of filters. */
+ c->arr = kzalloc(2 * sizeof(struct ts_filter *) * len, GFP_KERNEL);
+ if (!c->arr)
+ goto create_err_1;
+ c->pchain = c->arr + len;
+
+ while (conf->api) {
+ /* TODO: Can we get away with only sending pdev->dev? */
+ struct ts_filter *f =
+ (conf->api->create)(pdev, conf->config, count_coords);
+ if (!f) {
+ dev_info(&pdev->dev, "Filter %d creation failed\n",
+ count);
+ goto create_err_2;
+ }
+
+ f->api = conf->api;
+ c->arr[count++] = f;
+
+ if (f->api->haspoint && f->api->getpoint && f->api->process)
+ c->pchain[c->pchain_len++] = f;
+
+ conf++;
+ }
+
+ dev_info(&pdev->dev, "%d filter(s) initialized\n", count);
+
+ return c;
+
+create_err_2:
+ ts_filter_chain_destroy(c); /* Also frees c. */
+create_err_1:
+ dev_info(&pdev->dev, "Error in filter chain initialization\n");
+ /*
+ * FIXME: Individual filters have to return errors this way.
+ * We only have to forward the errors we find.
+ */
+ return ERR_PTR(-ENOMEM);
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_create);
+
+void ts_filter_chain_destroy(struct ts_filter_chain *c)
+{
+ if (c->arr) {
+ struct ts_filter **a = c->arr;
+ while (*a) {
+ ((*a)->api->destroy)(*a);
+ a++;
+ }
+ kfree(c->arr);
+ }
+ kfree(c);
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_destroy);
+
+void ts_filter_chain_clear(struct ts_filter_chain *c)
+{
+ struct ts_filter **a = c->arr;
+
+ while (*a) {
+ if ((*a)->api->clear)
+ ((*a)->api->clear)(*a);
+ a++;
+ }
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_clear);
+
+static void ts_filter_chain_scale(struct ts_filter_chain *c, int *coords)
+{
+ struct ts_filter **a = c->arr;
+ while (*a) {
+ if ((*a)->api->scale)
+ ((*a)->api->scale)(*a, coords);
+ a++;
+ }
+}
+
+int ts_filter_chain_feed(struct ts_filter_chain *c, int *coords)
+{
+ int len = c->pchain_len;
+ int i = len - 1;
+
+ if (!c->pchain[0])
+ return 1; /* Nothing to do. */
+
+ BUG_ON(c->pchain[0]->api->haspoint(c->pchain[0]));
+
+ if (c->pchain[0]->api->process(c->pchain[0], coords))
+ return -1;
+
+ while (i >= 0 && i < len) {
+ if (c->pchain[i]->api->haspoint(c->pchain[i])) {
+ c->pchain[i]->api->getpoint(c->pchain[i], coords);
+ if (++i < len &&
+ c->pchain[i]->api->process(c->pchain[i], coords))
+ return -1; /* Error. */
+ } else {
+ i--;
+ }
+ }
+
+ if (i >= 0) { /* Same as i == len. */
+ ts_filter_chain_scale(c, coords);
+ return 1;
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(ts_filter_chain_feed);
+
diff --git a/drivers/input/touchscreen/ts_filter_group.c b/drivers/input/touchscreen/ts_filter_group.c
new file mode 100644
index 00000000000..9e344c5f19f
--- /dev/null
+++ b/drivers/input/touchscreen/ts_filter_group.c
@@ -0,0 +1,330 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2008,2009 by Openmoko, Inc.
+ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
+ * All rights reserved.
+ *
+ *
+ * This filter is useful to reject samples that are not reliable. We consider
+ * that a sample is not reliable if it deviates form the Majority.
+ * This filter mixes information from all the available dimensions. It means
+ * that for two dimensions we draw a rectangle where the thought-to-be good
+ * points can be found.
+ *
+ * The implementation would be more efficient with a double-linked list but
+ * let's keep it simple for now.
+ *
+ * 1) We collect S samples and keep it in sorted sets.
+ * - Points that are "close enough" are considered to be in the same set.
+ * We don't actually keep the sets but ranges of points.
+ *
+ * 2) For each dimension:
+ * - We choose the range with more elements. If more than "threshold"
+ * points are in this range we use the minimum and the maximum point
+ * of the range to define the valid range for this dimension [min, max],
+ * otherwise we discard all the points and the ranges and go to step 1.
+ *
+ * 3) We consider the unsorted S samples and try to feed them to the next
+ * filter in the chain. If one of the points of each sample
+ * is not in the allowed range for its dimension we discard the sample.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input/touchscreen/ts_filter_group.h>
+
+struct coord_range {
+ int min; /* Minimum value of the range. */
+ int max; /* Maximum value of the range */
+ int N; /* Number of points in the range. */
+};
+
+struct ts_filter_group {
+ /* Private filter configuration. */
+ struct ts_filter_group_configuration *config;
+ /* Filter API. */
+ struct ts_filter tsf;
+
+ int N; /* How many samples we have. */
+ int *samples[MAX_TS_FILTER_COORDS]; /* The samples: our input. */
+
+ /* Temporal values that help us compute range_min and range_max. */
+ struct coord_range *ranges[MAX_TS_FILTER_COORDS]; /* Ranges. */
+ int n_ranges[MAX_TS_FILTER_COORDS]; /* Number of ranges */
+
+ /* Computed ranges that help us filter the points. */
+ int range_max[MAX_TS_FILTER_COORDS]; /* Max. computed ranges. */
+ int range_min[MAX_TS_FILTER_COORDS]; /* Min. computed ranges. */
+
+ int tries_left; /* We finish if we can't get enough samples. */
+ int ready; /* If we are ready to deliver samples. */
+ int result; /* Index of the point being returned. */
+};
+
+#define ts_filter_to_filter_group(f) \
+ container_of(f, struct ts_filter_group, tsf)
+
+
+static void ts_filter_group_clear_internal(struct ts_filter_group *tsfg,
+ int attempts)
+{
+ int n;
+ tsfg->N = 0;
+ tsfg->tries_left = attempts;
+ tsfg->ready = 0;
+ tsfg->result = 0;
+ for (n = 0; n < tsfg->tsf.count_coords; n++)
+ tsfg->n_ranges[n] = 0;
+}
+
+static void ts_filter_group_clear(struct ts_filter *tsf)
+{
+ struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
+
+ ts_filter_group_clear_internal(tsfg, tsfg->config->attempts);
+}
+
+static struct ts_filter *ts_filter_group_create(
+ struct platform_device *pdev,
+ const struct ts_filter_configuration *conf,
+ int count_coords)
+{
+ struct ts_filter_group *tsfg;
+ int i;
+
+ tsfg = kzalloc(sizeof(struct ts_filter_group), GFP_KERNEL);
+ if (!tsfg)
+ return NULL;
+
+ tsfg->config = container_of(conf,
+ struct ts_filter_group_configuration,
+ config);
+ tsfg->tsf.count_coords = count_coords;
+
+ BUG_ON(tsfg->config->attempts <= 0);
+ BUG_ON(tsfg->config->length < tsfg->config->threshold);
+
+ tsfg->samples[0] = kmalloc(count_coords * sizeof(int) *
+ tsfg->config->length, GFP_KERNEL);
+ if (!tsfg->samples[0]) {
+ kfree(tsfg);
+ return NULL;
+ }
+ for (i = 1; i < count_coords; ++i)
+ tsfg->samples[i] = tsfg->samples[0] + i * tsfg->config->length;
+
+ tsfg->ranges[0] = kmalloc(count_coords * sizeof(struct coord_range) *
+ tsfg->config->length, GFP_KERNEL);
+ if (!tsfg->ranges[0]) {
+ kfree(tsfg->samples[0]);
+ kfree(tsfg);
+ return NULL;
+ }
+ for (i = 1; i < count_coords; ++i)
+ tsfg->ranges[i] = tsfg->ranges[0] + i * tsfg->config->length;
+
+ ts_filter_group_clear_internal(tsfg, tsfg->config->attempts);
+
+ dev_info(&pdev->dev, "Created Group filter len:%d coords:%d close:%d "
+ "thresh:%d\n", tsfg->config->length, count_coords,
+ tsfg->config->close_enough, tsfg->config->threshold);
+
+ return &tsfg->tsf;
+}
+
+static void ts_filter_group_destroy(struct ts_filter *tsf)
+{
+ struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
+
+ kfree(tsfg->samples[0]);
+ kfree(tsfg->ranges[0]);
+ kfree(tsf);
+}
+
+static void ts_filter_group_prepare_next(struct ts_filter *tsf);
+
+#define MIN(a, b) ((a) < (b) ? (a) : (b))
+#define MAX(a, b) ((a) > (b) ? (a) : (b))
+#define IN_RANGE(c, r) ((c) >= (r).min - tsfg->config->close_enough && \
+ (c) <= (r).max + tsfg->config->close_enough)
+
+static void delete_spot(struct coord_range *v, int n, int size)
+{
+ int i;
+ for (i = n; i < size - 1; ++i)
+ v[i] = v[i + 1];
+}
+
+static int ts_filter_group_process(struct ts_filter *tsf, int *coords)
+{
+ struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
+ int n;
+ int j;
+
+ BUG_ON(tsfg->N >= tsfg->config->length);
+ BUG_ON(tsfg->ready);
+
+ for (n = 0; n < tsfg->tsf.count_coords; n++) {
+ int i;
+ struct coord_range *range = tsfg->ranges[n];
+ int *n_ranges = &tsfg->n_ranges[n];
+ int found = 0;
+
+ tsfg->samples[n][tsfg->N] = coords[n];
+
+ for (i = 0; i < *n_ranges; ++i) {
+ if (IN_RANGE(coords[n], range[i])) {
+ range[i].min = MIN(range[i].min, coords[n]);
+ range[i].max = MAX(range[i].max, coords[n]);
+ range[i].N++;
+ found = 1;
+ break;
+ } else if (coords[n] <= range[i].min)
+ break; /* We need to insert a range. */
+ }
+ if (found) { /* We might need to melt ranges. */
+ if (i && range[i - 1].max + tsfg->config->close_enough
+ >= range[i].min) {
+ BUG_ON(range[i - 1].max >= range[i].max);
+ range[i - 1].max = range[i].max;
+ range[i - 1].N += range[i].N;
+ delete_spot(range, i, *n_ranges);
+ (*n_ranges)--;
+ i--;
+ }
+ if (i < *n_ranges - 1 && range[i + 1].min -
+ tsfg->config->close_enough <= range[i].max) {
+ range[i].max = range[i + 1].max;
+ range[i].N += range[i + 1].N;
+ delete_spot(range, i + 1, *n_ranges);
+ (*n_ranges)--;
+ }
+ } else {
+ BUG_ON((*n_ranges) >= tsfg->config->length);
+ (*n_ranges)++;
+ for (j = *n_ranges - 1; j > i; --j)
+ range[j] = range[j - 1];
+ range[i].N = 1;
+ range[i].min = coords[n];
+ range[i].max = coords[n];
+ }
+ }
+
+ if (++tsfg->N < tsfg->config->length)
+ return 0;
+
+ for (n = 0; n < tsfg->tsf.count_coords; ++n) {
+ int best = 0;
+ for (j = 1; j < tsfg->n_ranges[n]; ++j)
+ if (tsfg->ranges[n][best].N < tsfg->ranges[n][j].N)
+ best = j;
+ if (tsfg->ranges[n][best].N < tsfg->config->threshold) {
+ /* This set of points is not good enough for us. */
+ if (--tsfg->tries_left) {
+ ts_filter_group_clear_internal
+ (tsfg, tsfg->tries_left);
+ /* No errors but we need more samples. */
+ return 0;
+ }
+ return 1; /* We give up: error. */
+ }
+ tsfg->range_min[n] = tsfg->ranges[n][best].min;
+ tsfg->range_max[n] = tsfg->ranges[n][best].max;
+ }
+
+ ts_filter_group_prepare_next(tsf);
+
+ return 0;
+}
+
+/*
+ * This private function prepares a point that will be returned
+ * in ts_filter_group_getpoint if it is available. It updates
+ * the priv->ready state also.
+ */
+static void ts_filter_group_prepare_next(struct ts_filter *tsf)
+{
+ struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+ int n;
+
+ while (priv->result < priv->N) {
+ for (n = 0; n < priv->tsf.count_coords; ++n) {
+ if (priv->samples[n][priv->result] <
+ priv->range_min[n] ||
+ priv->samples[n][priv->result] > priv->range_max[n])
+ break;
+ }
+
+ if (n == priv->tsf.count_coords) /* Sample is OK. */
+ break;
+
+ priv->result++;
+ }
+
+ if (unlikely(priv->result >= priv->N)) { /* No sample to deliver. */
+ ts_filter_group_clear_internal(priv, priv->config->attempts);
+ priv->ready = 0;
+ } else {
+ priv->ready = 1;
+ }
+}
+
+static int ts_filter_group_haspoint(struct ts_filter *tsf)
+{
+ struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+
+ return priv->ready;
+}
+
+static void ts_filter_group_getpoint(struct ts_filter *tsf, int *point)
+{
+ struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+ int n;
+
+ BUG_ON(!priv->ready);
+
+ for (n = 0; n < priv->tsf.count_coords; n++)
+ point[n] = priv->samples[n][priv->result];
+
+ priv->result++;
+
+ /* This call will update priv->ready. */
+ ts_filter_group_prepare_next(tsf);
+}
+
+/*
+ * Get ready to process the next batch of points, forget
+ * points we could have delivered.
+ */
+static void ts_filter_group_scale(struct ts_filter *tsf, int *coords)
+{
+ struct ts_filter_group *priv = ts_filter_to_filter_group(tsf);
+
+ ts_filter_group_clear_internal(priv, priv->config->attempts);
+}
+
+const struct ts_filter_api ts_filter_group_api = {
+ .create = ts_filter_group_create,
+ .destroy = ts_filter_group_destroy,
+ .clear = ts_filter_group_clear,
+ .process = ts_filter_group_process,
+ .haspoint = ts_filter_group_haspoint,
+ .getpoint = ts_filter_group_getpoint,
+ .scale = ts_filter_group_scale,
+};
+EXPORT_SYMBOL_GPL(ts_filter_group_api);
+
diff --git a/drivers/input/touchscreen/ts_filter_linear.c b/drivers/input/touchscreen/ts_filter_linear.c
new file mode 100644
index 00000000000..8b496591eec
--- /dev/null
+++ b/drivers/input/touchscreen/ts_filter_linear.c
@@ -0,0 +1,212 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (C) 2008,2009 by Openmoko, Inc.
+ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
+ * All rights reserved.
+ *
+ * Linearly scale touchscreen values.
+ *
+ * Expose the TS_FILTER_LINEAR_NCONSTANTS for the linear transformation
+ * using sysfs.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+
+#include <linux/input/touchscreen/ts_filter_linear.h>
+
+struct ts_filter_linear;
+
+/* Sysfs code. */
+
+struct const_obj {
+ /* The actual private object. */
+ struct ts_filter_linear *tsfl;
+ /* Our kobject. */
+ struct kobject kobj;
+};
+
+#define to_const_obj(x) container_of(x, struct const_obj, kobj)
+
+struct const_attribute {
+ struct attribute attr;
+ ssize_t (*show)(struct const_obj *const, struct const_attribute *attr,
+ char *buf);
+ ssize_t (*store)(struct const_obj *const, struct const_attribute *attr,
+ const char *buf, size_t count);
+};
+
+#define to_const_attr(x) container_of(x, struct const_attribute, attr)
+
+
+/* Private linear filter structure. */
+
+struct ts_filter_linear {
+ /* Private configuration for this filter. */
+ struct ts_filter_linear_configuration *config;
+
+ /* Generic filter API. */
+ struct ts_filter tsf;
+
+ /* Linear constants for the transformation. */
+ int constants[TS_FILTER_LINEAR_NCONSTANTS];
+
+ /* Sysfs. */
+
+ /* Our const_object. */
+ struct const_obj c_obj;
+ /* Our type. We will stick operations to it. */
+ struct kobj_type const_ktype;
+ /* Attrs. of the virtual files. */
+ struct const_attribute kattrs[TS_FILTER_LINEAR_NCONSTANTS];
+ /* Default Attrs. Always NULL for us. */
+ struct attribute *attrs[TS_FILTER_LINEAR_NCONSTANTS + 1];
+ /* Storage for the name of the virtual files. */
+ char attr_names[TS_FILTER_LINEAR_NCONSTANTS][2];
+};
+
+#define ts_filter_to_filter_linear(f) \
+ container_of(f, struct ts_filter_linear, tsf)
+
+/* Sysfs functions. */
+
+static ssize_t const_attr_show(struct kobject *kobj,
+ struct attribute *attr,
+ char *buf)
+{
+ struct const_attribute *a = to_const_attr(attr);
+
+ return a->show(to_const_obj(kobj), a, buf);
+}
+
+static ssize_t const_attr_store(struct kobject *kobj,
+ struct attribute *attr,
+ const char *buf, size_t len)
+{
+ struct const_attribute *a = to_const_attr(attr);
+
+ return a->store(to_const_obj(kobj), a, buf, len);
+}
+
+static struct sysfs_ops const_sysfs_ops = {
+ .show = const_attr_show,
+ .store = const_attr_store,
+};
+
+static void const_release(struct kobject *kobj)
+{
+ kfree(to_const_obj(kobj)->tsfl);
+}
+
+static ssize_t const_show(struct const_obj *obj, struct const_attribute *attr,
+ char *buf)
+{
+ int who;
+
+ sscanf(attr->attr.name, "%d", &who);
+ return sprintf(buf, "%d\n", obj->tsfl->constants[who]);
+}
+
+static ssize_t const_store(struct const_obj *obj, struct const_attribute *attr,
+ const char *buf, size_t count)
+{
+ int who;
+
+ sscanf(attr->attr.name, "%d", &who);
+ sscanf(buf, "%d", &obj->tsfl->constants[who]);
+ return count;
+}
+
+/* Filter functions. */
+
+static struct ts_filter *ts_filter_linear_create(
+ struct platform_device *pdev,
+ const struct ts_filter_configuration *conf,
+ int count_coords)
+{
+ struct ts_filter_linear *tsfl;
+ int i;
+ int ret;
+
+ tsfl = kzalloc(sizeof(struct ts_filter_linear), GFP_KERNEL);
+ if (!tsfl)
+ return NULL;
+
+ tsfl->config = container_of(conf,
+ struct ts_filter_linear_configuration,
+ config);
+
+ tsfl->tsf.count_coords = count_coords;
+
+ for (i = 0; i < TS_FILTER_LINEAR_NCONSTANTS; ++i) {
+ tsfl->constants[i] = tsfl->config->constants[i];
+
+ /* sysfs */
+ sprintf(tsfl->attr_names[i], "%d", i);
+ tsfl->kattrs[i].attr.name = tsfl->attr_names[i];
+ tsfl->kattrs[i].attr.mode = 0666;
+ tsfl->kattrs[i].show = const_show;
+ tsfl->kattrs[i].store = const_store;
+ tsfl->attrs[i] = &tsfl->kattrs[i].attr;
+ }
+ tsfl->attrs[i] = NULL;
+
+ tsfl->const_ktype.sysfs_ops = &const_sysfs_ops;
+ tsfl->const_ktype.release = const_release;
+ tsfl->const_ktype.default_attrs = tsfl->attrs;
+ tsfl->c_obj.tsfl = tsfl; /* kernel frees tsfl in const_release */
+
+ ret = kobject_init_and_add(&tsfl->c_obj.kobj, &tsfl->const_ktype,
+ &pdev->dev.kobj, "calibration");
+ if (ret) {
+ kobject_put(&tsfl->c_obj.kobj);
+ return NULL;
+ }
+
+ dev_info(&pdev->dev, "Created Linear filter coords:%d\n", count_coords);
+
+ return &tsfl->tsf;
+}
+
+static void ts_filter_linear_destroy(struct ts_filter *tsf)
+{
+ struct ts_filter_linear *tsfl = ts_filter_to_filter_linear(tsf);
+
+ /* Kernel frees tsfl in const_release. */
+ kobject_put(&tsfl->c_obj.kobj);
+}
+
+static void ts_filter_linear_scale(struct ts_filter *tsf, int *coords)
+{
+ struct ts_filter_linear *tsfl = ts_filter_to_filter_linear(tsf);
+
+ int *k = tsfl->constants;
+ int c0 = coords[tsfl->config->coord0];
+ int c1 = coords[tsfl->config->coord1];
+
+ coords[tsfl->config->coord0] = (k[2] + k[0] * c0 + k[1] * c1) / k[6];
+ coords[tsfl->config->coord1] = (k[5] + k[3] * c0 + k[4] * c1) / k[6];
+}
+
+const struct ts_filter_api ts_filter_linear_api = {
+ .create = ts_filter_linear_create,
+ .destroy = ts_filter_linear_destroy,
+ .scale = ts_filter_linear_scale,
+};
+EXPORT_SYMBOL_GPL(ts_filter_linear_api);
+
diff --git a/drivers/input/touchscreen/ts_filter_mean.c b/drivers/input/touchscreen/ts_filter_mean.c
new file mode 100644
index 00000000000..ad4e9c1207c
--- /dev/null
+++ b/drivers/input/touchscreen/ts_filter_mean.c
@@ -0,0 +1,174 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2008,2009
+ * Andy Green <andy@warmcat.com>
+ * Nelson Castillo <arhuaco@freaks-unidos.net>
+ *
+ * Simple mean filter.
+ *
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+
+#include <linux/input/touchscreen/ts_filter_mean.h>
+
+struct ts_filter_mean {
+ /* Copy of the private filter configuration. */
+ struct ts_filter_mean_configuration *config;
+ /* Filter API. */
+ struct ts_filter tsf;
+
+ /* Index on a circular buffer. */
+ int curr;
+ /* Useful to tell if the circular buffer is full(read:ready). */
+ int count;
+ /* Sumation used to compute the mean. */
+ int sum[MAX_TS_FILTER_COORDS];
+ /* Keep point values and decrement them from the sum on time. */
+ int *fifo[MAX_TS_FILTER_COORDS];
+ /* Store the output of this filter. */
+ int ready;
+};
+
+#define ts_filter_to_filter_mean(f) container_of(f, struct ts_filter_mean, tsf)
+
+
+static void ts_filter_mean_clear(struct ts_filter *tsf);
+
+static struct ts_filter *ts_filter_mean_create(
+ struct platform_device *pdev,
+ const struct ts_filter_configuration *conf,
+ int count_coords)
+{
+ struct ts_filter_mean *priv;
+ int *v;
+ int n;
+
+ priv = kzalloc(sizeof(struct ts_filter_mean), GFP_KERNEL);
+ if (!priv)
+ return NULL;
+
+ priv->tsf.count_coords = count_coords;
+ priv->config = container_of(conf,
+ struct ts_filter_mean_configuration,
+ config);
+
+ BUG_ON(priv->config->length <= 0);
+
+ v = kmalloc(priv->config->length * sizeof(int) * count_coords,
+ GFP_KERNEL);
+ if (!v)
+ return NULL;
+
+ for (n = 0; n < count_coords; n++) {
+ priv->fifo[n] = v;
+ v += priv->config->length;
+ }
+
+ ts_filter_mean_clear(&priv->tsf);
+
+ dev_info(&pdev->dev, "Created Mean filter len:%d coords:%d\n",
+ priv->config->length, count_coords);
+
+ return &priv->tsf;
+}
+
+static void ts_filter_mean_destroy(struct ts_filter *tsf)
+{
+ struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+ kfree(priv->fifo[0]); /* first guy has pointer from kmalloc */
+ kfree(tsf);
+}
+
+static void ts_filter_mean_clear(struct ts_filter *tsf)
+{
+ struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+ priv->count = 0;
+ priv->curr = 0;
+ priv->ready = 0;
+ memset(priv->sum, 0, tsf->count_coords * sizeof(int));
+}
+
+static int ts_filter_mean_process(struct ts_filter *tsf, int *coords)
+{
+ struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+ int n;
+
+ BUG_ON(priv->ready);
+
+ for (n = 0; n < tsf->count_coords; n++) {
+ priv->sum[n] += coords[n];
+ priv->fifo[n][priv->curr] = coords[n];
+ }
+
+ if (priv->count + 1 == priv->config->length)
+ priv->ready = 1;
+ else
+ priv->count++;
+
+ priv->curr = (priv->curr + 1) % priv->config->length;
+
+ return 0; /* No error. */
+}
+
+static int ts_filter_mean_haspoint(struct ts_filter *tsf)
+{
+ struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+ return priv->ready;
+}
+
+static void ts_filter_mean_getpoint(struct ts_filter *tsf, int *point)
+{
+ struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+ int n;
+
+ BUG_ON(!priv->ready);
+
+ for (n = 0; n < tsf->count_coords; n++) {
+ point[n] = priv->sum[n];
+ priv->sum[n] -= priv->fifo[n][priv->curr];
+ }
+
+ priv->ready = 0;
+}
+
+static void ts_filter_mean_scale(struct ts_filter *tsf, int *coords)
+{
+ int n;
+ struct ts_filter_mean *priv = ts_filter_to_filter_mean(tsf);
+
+ for (n = 0; n < tsf->count_coords; n++) {
+ coords[n] += priv->config->length >> 1; /* Rounding. */
+ coords[n] /= priv->config->length;
+ }
+}
+
+const struct ts_filter_api ts_filter_mean_api = {
+ .create = ts_filter_mean_create,
+ .destroy = ts_filter_mean_destroy,
+ .clear = ts_filter_mean_clear,
+ .process = ts_filter_mean_process,
+ .scale = ts_filter_mean_scale,
+ .haspoint = ts_filter_mean_haspoint,
+ .getpoint = ts_filter_mean_getpoint,
+};
+EXPORT_SYMBOL_GPL(ts_filter_mean_api);
+
diff --git a/drivers/input/touchscreen/ts_filter_median.c b/drivers/input/touchscreen/ts_filter_median.c
new file mode 100644
index 00000000000..c608f7a9794
--- /dev/null
+++ b/drivers/input/touchscreen/ts_filter_median.c
@@ -0,0 +1,261 @@
+/*
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ * Copyright (c) 2008 Andy Green <andy@warmcat.com>
+ *
+ *
+ * Median averaging stuff. We sort incoming raw samples into an array of
+ * MEDIAN_SIZE length, discarding the oldest sample each time once we are full.
+ * We then return the sum of the middle three samples for X and Y. It means
+ * the final result must be divided by (3 * scaling factor) to correct for
+ * avoiding the repeated /3.
+ *
+ * This strongly rejects brief excursions away from a central point that is
+ * sticky in time compared to the excursion duration.
+ *
+ * Thanks to Dale Schumacher (who wrote some example code) and Carl-Daniel
+ * Halifinger who pointed out this would be a good method.
+ */
+
+#include <linux/errno.h>
+#include <linux/kernel.h>
+#include <linux/slab.h>
+#include <linux/input/touchscreen/ts_filter_median.h>
+
+struct ts_filter_median {
+ /* Private configuration. */
+ struct ts_filter_median_configuration *config;
+ /* Generic Filter API. */
+ struct ts_filter tsf;
+
+ /* Count raw samples we get. */
+ int samples_count;
+ /*
+ * Remember the last coordinates we got in order to know if
+ * we are moving slow or fast.
+ */
+ int last_issued[MAX_TS_FILTER_COORDS];
+ /* How many samples in the sort buffer are valid. */
+ int valid;
+ /* Samples taken for median in sorted form. */
+ int *sort[MAX_TS_FILTER_COORDS];
+ /* Samples taken for median. */
+ int *fifo[MAX_TS_FILTER_COORDS];
+ /* Where we are in the fifo sample memory. */
+ int pos;
+ /* Do we have a sample to deliver? */
+ int ready;
+};
+
+#define ts_filter_to_filter_median(f) \
+ container_of(f, struct ts_filter_median, tsf)
+
+
+static void ts_filter_median_insert(int *p, int sample, int count)
+{
+ int n;
+
+ /* Search through what we got so far to find where to put sample. */
+ for (n = 0; n < count; n++)
+ if (sample < p[n]) { /* We met somebody bigger than us? */
+ /* Starting from the end, push bigger guys down one. */
+ for (count--; count >= n; count--)
+ p[count + 1] = p[count];
+ p[n] = sample; /* Put us in place of first bigger. */
+ return;
+ }
+
+ p[count] = sample; /* Nobody was bigger than us, add us on the end. */
+}
+
+static void ts_filter_median_del(int *p, int value, int count)
+{
+ int index;
+
+ for (index = 0; index < count; index++)
+ if (p[index] == value) {
+ for (; index < count; index++)
+ p[index] = p[index + 1];
+ return;
+ }
+}
+
+
+static void ts_filter_median_clear(struct ts_filter *tsf)
+{
+ struct ts_filter_median *tsfm = ts_filter_to_filter_median(tsf);
+
+ tsfm->pos = 0;
+ tsfm->valid = 0;
+ tsfm->ready = 0;
+ memset(&tsfm->last_issued[0], 1, tsf->count_coords * sizeof(int));
+}
+
+static struct ts_filter *ts_filter_median_create(
+ struct platform_device *pdev,
+ const struct ts_filter_configuration *conf,
+ int count_coords)
+{
+ int *p;
+ int n;
+ struct ts_filter_median *tsfm = kzalloc(sizeof(struct ts_filter_median),
+ GFP_KERNEL);
+
+ if (!tsfm)
+ return NULL;
+
+ tsfm->config = container_of(conf,
+ struct ts_filter_median_configuration,
+ config);
+
+ tsfm->tsf.count_coords = count_coords;
+
+ tsfm->config->midpoint = (tsfm->config->extent >> 1) + 1;
+
+ p = kmalloc(2 * count_coords * sizeof(int) * (tsfm->config->extent + 1),
+ GFP_KERNEL);
+ if (!p) {
+ kfree(tsfm);
+ return NULL;
+ }
+
+ for (n = 0; n < count_coords; n++) {
+ tsfm->sort[n] = p;
+ p += tsfm->config->extent + 1;
+ tsfm->fifo[n] = p;
+ p += tsfm->config->extent + 1;
+ }
+
+ ts_filter_median_clear(&tsfm->tsf);
+
+ dev_info(&pdev->dev,
+ "Created Median filter len:%d coords:%d dec_threshold:%d\n",
+ tsfm->config->extent, count_coords,
+ tsfm->config->decimation_threshold);
+
+ return &tsfm->tsf;
+}
+
+static void ts_filter_median_destroy(struct ts_filter *tsf)
+{
+ struct ts_filter_median *tsfm = ts_filter_to_filter_median(tsf);
+
+ kfree(tsfm->sort[0]); /* First guy has pointer from kmalloc. */
+ kfree(tsf);
+}
+
+static void ts_filter_median_scale(struct ts_filter *tsf, int *coords)
+{
+ int n;
+
+ for (n = 0; n < tsf->count_coords; n++)
+ coords[n] = (coords[n] + 2) / 3;
+}
+
+/*
+ * Give us the raw sample data coords, and if we return 1 then you can
+ * get a filtered coordinate from coords. If we return 0 you didn't
+ * fill all the filters with samples yet.
+ */
+
+static int ts_filter_median_process(struct ts_filter *tsf, int *coords)
+{
+ struct ts_filter_median *tsfm = ts_filter_to_filter_median(tsf);
+ int n;
+ int movement = 1;
+
+ for (n = 0; n < tsf->count_coords; n++) {
+ /* Grab copy in insertion order to remove when oldest. */
+ tsfm->fifo[n][tsfm->pos] = coords[n];
+ /* Insert these samples in sorted order in the median arrays. */
+ ts_filter_median_insert(tsfm->sort[n], coords[n], tsfm->valid);
+ }
+ /* Move us on in the fifo. */
+ if (++tsfm->pos == (tsfm->config->extent + 1))
+ tsfm->pos = 0;
+
+ /* Have we finished a median sampling? */
+ if (++tsfm->valid < tsfm->config->extent)
+ goto process_exit; /* No valid sample to use. */
+
+ BUG_ON(tsfm->valid != tsfm->config->extent);
+
+ tsfm->valid--;
+
+ /*
+ * Sum the middle 3 in the median sorted arrays. We don't divide back
+ * down which increases the sum resolution by a factor of 3 until the
+ * scale API function is called.
+ */
+ for (n = 0; n < tsf->count_coords; n++)
+ /* Perform the deletion of the oldest sample. */
+ ts_filter_median_del(tsfm->sort[n], tsfm->fifo[n][tsfm->pos],
+ tsfm->valid);
+
+ tsfm->samples_count--;
+ if (tsfm->samples_count >= 0)
+ goto process_exit;
+
+ for (n = 0; n < tsf->count_coords; n++) {
+ /* Give the coordinate result from summing median 3. */
+ coords[n] = tsfm->sort[n][tsfm->config->midpoint - 1] +
+ tsfm->sort[n][tsfm->config->midpoint] +
+ tsfm->sort[n][tsfm->config->midpoint + 1];
+
+ movement += abs(tsfm->last_issued[n] - coords[n]);
+ }
+
+ if (movement > tsfm->config->decimation_threshold) /* Moving fast. */
+ tsfm->samples_count = tsfm->config->decimation_above;
+ else
+ tsfm->samples_count = tsfm->config->decimation_below;
+
+ memcpy(&tsfm->last_issued[0], coords, tsf->count_coords * sizeof(int));
+
+ tsfm->ready = 1;
+
+process_exit:
+ return 0;
+}
+
+static int ts_filter_median_haspoint(struct ts_filter *tsf)
+{
+ struct ts_filter_median *priv = ts_filter_to_filter_median(tsf);
+
+ return priv->ready;
+}
+
+static void ts_filter_median_getpoint(struct ts_filter *tsf, int *point)
+{
+ struct ts_filter_median *priv = ts_filter_to_filter_median(tsf);
+
+ BUG_ON(!priv->ready);
+
+ memcpy(point, &priv->last_issued[0], tsf->count_coords * sizeof(int));
+
+ priv->ready = 0;
+}
+
+const struct ts_filter_api ts_filter_median_api = {
+ .create = ts_filter_median_create,
+ .destroy = ts_filter_median_destroy,
+ .clear = ts_filter_median_clear,
+ .process = ts_filter_median_process,
+ .scale = ts_filter_median_scale,
+ .haspoint = ts_filter_median_haspoint,
+ .getpoint = ts_filter_median_getpoint,
+};
+EXPORT_SYMBOL_GPL(ts_filter_median_api);
+
diff --git a/drivers/mfd/Kconfig b/drivers/mfd/Kconfig
index 570be139f9d..f5a60b49dfb 100644
--- a/drivers/mfd/Kconfig
+++ b/drivers/mfd/Kconfig
@@ -305,6 +305,8 @@ config EZX_PCAP
This enables the PCAP ASIC present on EZX Phones. This is
needed for MMC, TouchScreen, Sound, USB, etc..
+source "drivers/mfd/glamo/Kconfig"
+
endmenu
menu "Multimedia Capabilities Port drivers"
diff --git a/drivers/mfd/Makefile b/drivers/mfd/Makefile
index f3b277b90d4..5272b0451f0 100644
--- a/drivers/mfd/Makefile
+++ b/drivers/mfd/Makefile
@@ -4,6 +4,7 @@
obj-$(CONFIG_MFD_SM501) += sm501.o
obj-$(CONFIG_MFD_ASIC3) += asic3.o
+obj-$(CONFIG_MFD_GLAMO) += glamo/
obj-$(CONFIG_HTC_EGPIO) += htc-egpio.o
obj-$(CONFIG_HTC_PASIC3) += htc-pasic3.o
diff --git a/drivers/mfd/glamo/Kconfig b/drivers/mfd/glamo/Kconfig
new file mode 100644
index 00000000000..3aa4831a4ff
--- /dev/null
+++ b/drivers/mfd/glamo/Kconfig
@@ -0,0 +1,42 @@
+config MFD_GLAMO
+ bool "Smedia Glamo 336x/337x support"
+ select MFD_CORE
+ help
+ This enables the core driver for the Smedia Glamo 336x/337x
+ multi-function device. It includes irq_chip demultiplex as
+ well as clock / power management and GPIO support.
+
+config MFD_GLAMO_FB
+ tristate "Smedia Glamo 336x/337x framebuffer support"
+ depends on FB && MFD_GLAMO
+ select FB_CFB_FILLRECT
+ select FB_CFB_COPYAREA
+ select FB_CFB_IMAGEBLIT
+ help
+ Frame buffer driver for the LCD controller in the Smedia Glamo
+ 336x/337x.
+
+ This driver is also available as a module ( = code which can be
+ inserted and removed from the running kernel whenever you want). The
+ module will be called glamofb. If you want to compile it as a module,
+ say M here and read <file:Documentation/modules.txt>.
+
+ If unsure, say N.
+
+config MFD_GLAMO_GPIO
+ tristate "Glamo GPIO support"
+ depends on MFD_GLAMO
+
+ help
+ Enable a bitbanging SPI adapter driver for the Smedia Glamo.
+
+config MFD_GLAMO_MCI
+ tristate "Glamo S3C SD/MMC Card Interface support"
+ depends on MFD_GLAMO && MMC && REGULATOR
+ select CRC7
+ help
+ This selects a driver for the MCI interface found in
+ the S-Media GLAMO chip, as used in Openmoko
+ neo1973 GTA-02.
+
+ If unsure, say N.
diff --git a/drivers/mfd/glamo/Makefile b/drivers/mfd/glamo/Makefile
new file mode 100644
index 00000000000..ebf26f7e473
--- /dev/null
+++ b/drivers/mfd/glamo/Makefile
@@ -0,0 +1,11 @@
+#
+# Makefile for the Smedia Glamo framebuffer driver
+#
+
+obj-$(CONFIG_MFD_GLAMO) += glamo-core.o
+obj-$(CONFIG_MFD_GLAMO_GPIO) += glamo-gpio.o
+obj-$(CONFIG_MFD_GLAMO_SPI) += glamo-spi.o
+
+obj-$(CONFIG_MFD_GLAMO_FB) += glamo-fb.o
+obj-$(CONFIG_MFD_GLAMO_MCI) += glamo-mci.o
+
diff --git a/drivers/mfd/glamo/glamo-core.c b/drivers/mfd/glamo/glamo-core.c
new file mode 100644
index 00000000000..e0e39409595
--- /dev/null
+++ b/drivers/mfd/glamo/glamo-core.c
@@ -0,0 +1,1284 @@
+/* Smedia Glamo 3362 driver
+ *
+ * (C) 2007 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/init.h>
+#include <linux/irq.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/kernel_stat.h>
+#include <linux/spinlock.h>
+#include <linux/mfd/core.h>
+#include <linux/mfd/glamo.h>
+#include <linux/io.h>
+
+#include <linux/pm.h>
+
+#include "glamo-regs.h"
+#include "glamo-core.h"
+
+#define GLAMO_MEM_REFRESH_COUNT 0x100
+
+#define GLAMO_NR_IRQS 9
+
+#define GLAMO_IRQ_HOSTBUS 0
+#define GLAMO_IRQ_JPEG 1
+#define GLAMO_IRQ_MPEG 2
+#define GLAMO_IRQ_MPROC1 3
+#define GLAMO_IRQ_MPROC0 4
+#define GLAMO_IRQ_CMDQUEUE 5
+#define GLAMO_IRQ_2D 6
+#define GLAMO_IRQ_MMC 7
+#define GLAMO_IRQ_RISC 8
+
+/*
+ * Glamo internal settings
+ *
+ * We run the memory interface from the faster PLLB on 2.6.28 kernels and
+ * above. Couple of GTA02 users report trouble with memory bus when they
+ * upgraded from 2.6.24. So this parameter allows reversion to 2.6.24
+ * scheme if their Glamo chip needs it.
+ *
+ * you can override the faster default on kernel commandline using
+ *
+ * glamo3362.slow_memory=1
+ *
+ * for example
+ */
+
+static int slow_memory;
+module_param(slow_memory, int, 0644);
+
+struct reg_range {
+ int start;
+ int count;
+ char *name;
+ unsigned dump:1;
+};
+
+static const struct reg_range reg_range[] = {
+ { 0x0000, 0x76, "General", 1 },
+ { 0x0200, 0x18, "Host Bus", 1 },
+ { 0x0300, 0x38, "Memory", 1 },
+/* { 0x0400, 0x100, "Sensor", 0 }, */
+/* { 0x0500, 0x300, "ISP", 0 }, */
+/* { 0x0800, 0x400, "JPEG", 0 }, */
+/* { 0x0c00, 0xcc, "MPEG", 0 }, */
+ { 0x1100, 0xb2, "LCD 1", 1 },
+ { 0x1200, 0x64, "LCD 2", 1 },
+ { 0x1400, 0x42, "MMC", 1 },
+/* { 0x1500, 0x080, "MPU 0", 0 },
+ { 0x1580, 0x080, "MPU 1", 0 },
+ { 0x1600, 0x080, "Cmd Queue", 0 },
+ { 0x1680, 0x080, "RISC CPU", 0 },*/
+ { 0x1700, 0x400, "2D Unit", 1 },
+/* { 0x1b00, 0x900, "3D Unit", 0 }, */
+};
+
+static inline void __reg_write(struct glamo_core *glamo,
+ uint16_t reg, uint16_t val)
+{
+ writew(val, glamo->base + reg);
+}
+
+void glamo_reg_write(struct glamo_core *glamo,
+ uint16_t reg, uint16_t val)
+{
+ spin_lock(&glamo->lock);
+ __reg_write(glamo, reg, val);
+ spin_unlock(&glamo->lock);
+}
+EXPORT_SYMBOL_GPL(glamo_reg_write);
+
+
+static inline uint16_t __reg_read(struct glamo_core *glamo,
+ uint16_t reg)
+{
+ return readw(glamo->base + reg);
+}
+
+uint16_t glamo_reg_read(struct glamo_core *glamo, uint16_t reg)
+{
+ uint16_t val;
+ spin_lock(&glamo->lock);
+ val = __reg_read(glamo, reg);
+ spin_unlock(&glamo->lock);
+
+ return val;
+}
+EXPORT_SYMBOL_GPL(glamo_reg_read);
+
+static void __reg_set_bit_mask(struct glamo_core *glamo,
+ uint16_t reg, uint16_t mask,
+ uint16_t val)
+{
+ uint16_t tmp;
+
+ val &= mask;
+
+ tmp = __reg_read(glamo, reg);
+ tmp &= ~mask;
+ tmp |= val;
+ __reg_write(glamo, reg, tmp);
+}
+
+static void reg_set_bit_mask(struct glamo_core *glamo,
+ uint16_t reg, uint16_t mask,
+ uint16_t val)
+{
+ spin_lock(&glamo->lock);
+ __reg_set_bit_mask(glamo, reg, mask, val);
+ spin_unlock(&glamo->lock);
+}
+
+static inline void __reg_set_bit(struct glamo_core *glamo,
+ uint16_t reg, uint16_t bit)
+{
+ uint16_t tmp;
+ tmp = __reg_read(glamo, reg);
+ tmp |= bit;
+ __reg_write(glamo, reg, tmp);
+}
+
+static inline void __reg_clear_bit(struct glamo_core *glamo,
+ uint16_t reg, uint16_t bit)
+{
+ uint16_t tmp;
+ tmp = __reg_read(glamo, reg);
+ tmp &= ~bit;
+ __reg_write(glamo, reg, tmp);
+}
+
+static void __reg_write_batch(struct glamo_core *glamo, uint16_t reg,
+ uint16_t count, uint16_t *values)
+{
+ uint16_t end;
+ for (end = reg + count * 2; reg < end; reg += 2, ++values)
+ __reg_write(glamo, reg, *values);
+}
+
+static void __reg_read_batch(struct glamo_core *glamo, uint16_t reg,
+ uint16_t count, uint16_t *values)
+{
+ uint16_t end;
+ for (end = reg + count * 2; reg < end; reg += 2, ++values)
+ *values = __reg_read(glamo, reg);
+}
+
+void glamo_reg_write_batch(struct glamo_core *glamo, uint16_t reg,
+ uint16_t count, uint16_t *values)
+{
+ spin_lock(&glamo->lock);
+ __reg_write_batch(glamo, reg, count, values);
+ spin_unlock(&glamo->lock);
+}
+EXPORT_SYMBOL(glamo_reg_write_batch);
+
+void glamo_reg_read_batch(struct glamo_core *glamo, uint16_t reg,
+ uint16_t count, uint16_t *values)
+{
+ spin_lock(&glamo->lock);
+ __reg_read_batch(glamo, reg, count, values);
+ spin_unlock(&glamo->lock);
+}
+EXPORT_SYMBOL(glamo_reg_read_batch);
+
+/***********************************************************************
+ * resources of sibling devices
+ ***********************************************************************/
+
+static struct resource glamo_fb_resources[] = {
+ {
+ .name = "glamo-fb-regs",
+ .start = GLAMO_REGOFS_LCD,
+ .end = GLAMO_REGOFS_MMC - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "glamo-fb-mem",
+ .start = GLAMO_OFFSET_FB,
+ .end = GLAMO_OFFSET_FB + GLAMO_FB_SIZE - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct resource glamo_mmc_resources[] = {
+ {
+ .name = "glamo-mmc-regs",
+ .start = GLAMO_REGOFS_MMC,
+ .end = GLAMO_REGOFS_MPROC0 - 1,
+ .flags = IORESOURCE_MEM
+ }, {
+ .name = "glamo-mmc-mem",
+ .start = GLAMO_OFFSET_FB + GLAMO_FB_SIZE,
+ .end = GLAMO_OFFSET_FB + GLAMO_FB_SIZE +
+ GLAMO_MMC_BUFFER_SIZE - 1,
+ .flags = IORESOURCE_MEM
+ }, {
+ .start = GLAMO_IRQ_MMC,
+ .end = GLAMO_IRQ_MMC,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+enum glamo_cells {
+ GLAMO_CELL_FB,
+ GLAMO_CELL_MMC,
+ GLAMO_CELL_GPIO,
+};
+
+static const struct mfd_cell glamo_cells[] = {
+ [GLAMO_CELL_FB] = {
+ .name = "glamo-fb",
+ .num_resources = ARRAY_SIZE(glamo_fb_resources),
+ .resources = glamo_fb_resources,
+ },
+ [GLAMO_CELL_MMC] = {
+ .name = "glamo-mci",
+ .num_resources = ARRAY_SIZE(glamo_mmc_resources),
+ .resources = glamo_mmc_resources,
+ },
+ [GLAMO_CELL_GPIO] = {
+ .name = "glamo-gpio",
+ },
+};
+
+/***********************************************************************
+ * IRQ demultiplexer
+ ***********************************************************************/
+#define glamo_irq_bit(glamo, x) BIT(x - glamo->irq_base)
+
+static inline struct glamo_core *irq_to_glamo(unsigned int irq)
+{
+ return (struct glamo_core *)get_irq_chip_data(irq);
+}
+
+static void glamo_ack_irq(unsigned int irq)
+{
+ struct glamo_core *glamo = irq_to_glamo(irq);
+ /* clear interrupt source */
+ __reg_write(glamo, GLAMO_REG_IRQ_CLEAR, glamo_irq_bit(glamo, irq));
+}
+
+static void glamo_mask_irq(unsigned int irq)
+{
+ struct glamo_core *glamo = irq_to_glamo(irq);
+
+ /* clear bit in enable register */
+ __reg_clear_bit(glamo, GLAMO_REG_IRQ_ENABLE, glamo_irq_bit(glamo, irq));
+}
+
+static void glamo_unmask_irq(unsigned int irq)
+{
+ struct glamo_core *glamo = irq_to_glamo(irq);
+
+ /* set bit in enable register */
+ __reg_set_bit(glamo, GLAMO_REG_IRQ_ENABLE, glamo_irq_bit(glamo, irq));
+}
+
+static struct irq_chip glamo_irq_chip = {
+ .name = "glamo",
+ .ack = glamo_ack_irq,
+ .mask = glamo_mask_irq,
+ .unmask = glamo_unmask_irq,
+};
+
+static void glamo_irq_demux_handler(unsigned int irq, struct irq_desc *desc)
+{
+ struct glamo_core *glamo = get_irq_desc_data(desc);
+ desc->status &= ~(IRQ_REPLAY | IRQ_WAITING);
+
+ if (unlikely(desc->status & IRQ_INPROGRESS)) {
+ desc->status |= (IRQ_PENDING | IRQ_MASKED);
+ desc->chip->mask(irq);
+ desc->chip->ack(irq);
+ return;
+ }
+ kstat_incr_irqs_this_cpu(irq, desc);
+
+ desc->chip->ack(irq);
+ desc->status |= IRQ_INPROGRESS;
+
+ do {
+ uint16_t irqstatus;
+ int i;
+
+ if (unlikely((desc->status &
+ (IRQ_PENDING | IRQ_MASKED | IRQ_DISABLED)) ==
+ (IRQ_PENDING | IRQ_MASKED))) {
+ /* dealing with pending IRQ, unmasking */
+ desc->chip->unmask(irq);
+ desc->status &= ~IRQ_MASKED;
+ }
+
+ desc->status &= ~IRQ_PENDING;
+
+ /* read IRQ status register */
+ irqstatus = __reg_read(glamo, GLAMO_REG_IRQ_STATUS);
+ for (i = 0; i < 9; ++i) {
+ if (irqstatus & BIT(i))
+ generic_handle_irq(glamo->irq_base + i);
+ }
+
+ } while ((desc->status & (IRQ_PENDING | IRQ_DISABLED)) == IRQ_PENDING);
+
+ desc->status &= ~IRQ_INPROGRESS;
+}
+
+/*
+sysfs
+*/
+
+static ssize_t regs_write(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct glamo_core *glamo = dev_get_drvdata(dev);
+ unsigned int reg;
+ unsigned int val;
+
+ sscanf(buf, "%u %u", &reg, &val);
+ printk(KERN_INFO"reg 0x%02x <-- 0x%04x\n",
+ reg, val);
+
+ glamo_reg_write(glamo, reg, val);
+
+ return count;
+}
+
+static ssize_t regs_read(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct glamo_core *glamo = dev_get_drvdata(dev);
+ int i, n;
+ char *end = buf;
+ const struct reg_range *rr = reg_range;
+
+ spin_lock(&glamo->lock);
+
+ for (i = 0; i < ARRAY_SIZE(reg_range); ++i, ++rr) {
+ if (!rr->dump)
+ continue;
+ end += sprintf(end, "\n%s\n", rr->name);
+ for (n = rr->start; n < rr->start + rr->count; n += 2) {
+ if ((n & 15) == 0)
+ end += sprintf(end, "\n%04X: ", n);
+ end += sprintf(end, "%04x ", __reg_read(glamo, n));
+ }
+ end += sprintf(end, "\n");
+ }
+ spin_unlock(&glamo->lock);
+
+ return end - buf;
+}
+
+static DEVICE_ATTR(regs, 0644, regs_read, regs_write);
+
+struct glamo_engine_reg_set {
+ uint16_t reg;
+ uint16_t mask_suspended;
+ uint16_t mask_enabled;
+};
+
+struct glamo_engine_desc {
+ const char *name;
+ uint16_t hostbus;
+ const struct glamo_engine_reg_set *regs;
+ int num_regs;
+};
+
+static const struct glamo_engine_reg_set glamo_lcd_regs[] = {
+ { GLAMO_REG_CLOCK_LCD,
+ GLAMO_CLOCK_LCD_EN_M5CLK |
+ GLAMO_CLOCK_LCD_DG_M5CLK |
+ GLAMO_CLOCK_LCD_EN_DMCLK,
+
+ GLAMO_CLOCK_LCD_EN_DHCLK |
+ GLAMO_CLOCK_LCD_EN_DCLK
+ },
+ { GLAMO_REG_CLOCK_GEN5_1,
+ GLAMO_CLOCK_GEN51_EN_DIV_DMCLK,
+
+ GLAMO_CLOCK_GEN51_EN_DIV_DHCLK |
+ GLAMO_CLOCK_GEN51_EN_DIV_DCLK
+ }
+};
+
+static const struct glamo_engine_reg_set glamo_mmc_regs[] = {
+ { GLAMO_REG_CLOCK_MMC,
+ GLAMO_CLOCK_MMC_EN_M9CLK |
+ GLAMO_CLOCK_MMC_DG_M9CLK,
+
+ GLAMO_CLOCK_MMC_EN_TCLK |
+ GLAMO_CLOCK_MMC_DG_TCLK
+ },
+ { GLAMO_REG_CLOCK_GEN5_1,
+ 0,
+ GLAMO_CLOCK_GEN51_EN_DIV_TCLK
+ }
+};
+
+static const struct glamo_engine_reg_set glamo_2d_regs[] = {
+ { GLAMO_REG_CLOCK_2D,
+ GLAMO_CLOCK_2D_EN_M7CLK |
+ GLAMO_CLOCK_2D_DG_M7CLK,
+
+ GLAMO_CLOCK_2D_EN_GCLK |
+ GLAMO_CLOCK_2D_DG_GCLK
+ },
+ { GLAMO_REG_CLOCK_GEN5_1,
+ 0,
+ GLAMO_CLOCK_GEN51_EN_DIV_GCLK,
+ }
+};
+
+static const struct glamo_engine_reg_set glamo_cmdq_regs[] = {
+ { GLAMO_REG_CLOCK_2D,
+ GLAMO_CLOCK_2D_EN_M6CLK,
+ 0
+ },
+};
+
+#define GLAMO_ENGINE(xname, xhostbus, xregs) { \
+ .name = xname, \
+ .hostbus = xhostbus, \
+ .num_regs = ARRAY_SIZE(xregs), \
+ .regs = xregs, \
+}
+
+static const struct glamo_engine_desc glamo_engines[] = {
+ [GLAMO_ENGINE_LCD] = GLAMO_ENGINE("LCD", GLAMO_HOSTBUS2_MMIO_EN_LCD,
+ glamo_lcd_regs),
+ [GLAMO_ENGINE_MMC] = GLAMO_ENGINE("MMC", GLAMO_HOSTBUS2_MMIO_EN_MMC,
+ glamo_mmc_regs),
+ [GLAMO_ENGINE_2D] = GLAMO_ENGINE("2D", GLAMO_HOSTBUS2_MMIO_EN_2D,
+ glamo_2d_regs),
+ [GLAMO_ENGINE_CMDQ] = GLAMO_ENGINE("CMDQ", GLAMO_HOSTBUS2_MMIO_EN_CQ,
+ glamo_cmdq_regs),
+};
+
+static inline const char *glamo_engine_name(enum glamo_engine engine)
+{
+ return glamo_engines[engine].name;
+}
+
+/***********************************************************************
+ * 'engine' support
+ ***********************************************************************/
+
+int __glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+ int i;
+ const struct glamo_engine_desc *engine_desc = &glamo_engines[engine];
+ const struct glamo_engine_reg_set *reg;
+
+ switch (engine) {
+ case GLAMO_ENGINE_LCD:
+ case GLAMO_ENGINE_MMC:
+ case GLAMO_ENGINE_2D:
+ case GLAMO_ENGINE_CMDQ:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ reg = engine_desc->regs;
+
+ __reg_set_bit(glamo, GLAMO_REG_HOSTBUS(2),
+ engine_desc->hostbus);
+ for (i = engine_desc->num_regs; i; --i, ++reg)
+ __reg_set_bit(glamo, reg->reg,
+ reg->mask_suspended | reg->mask_enabled);
+
+ return 0;
+}
+
+int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+ int ret = 0;
+
+ spin_lock(&glamo->lock);
+
+ if (glamo->engine_state[engine] != GLAMO_ENGINE_ENABLED) {
+ ret = __glamo_engine_enable(glamo, engine);
+ if (!ret)
+ glamo->engine_state[engine] = GLAMO_ENGINE_ENABLED;
+ }
+
+ spin_unlock(&glamo->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(glamo_engine_enable);
+
+int __glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+ int i;
+ const struct glamo_engine_desc *engine_desc = &glamo_engines[engine];
+ const struct glamo_engine_reg_set *reg;
+
+ switch (engine) {
+ case GLAMO_ENGINE_LCD:
+ case GLAMO_ENGINE_MMC:
+ case GLAMO_ENGINE_2D:
+ case GLAMO_ENGINE_CMDQ:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ reg = engine_desc->regs;
+
+ __reg_clear_bit(glamo, GLAMO_REG_HOSTBUS(2),
+ engine_desc->hostbus);
+ for (i = engine_desc->num_regs; i; --i, ++reg)
+ __reg_clear_bit(glamo, reg->reg,
+ reg->mask_suspended | reg->mask_enabled);
+
+ return 0;
+}
+int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine)
+{
+ int ret = 0;
+
+ spin_lock(&glamo->lock);
+
+ if (glamo->engine_state[engine] != GLAMO_ENGINE_DISABLED) {
+ ret = __glamo_engine_disable(glamo, engine);
+ if (!ret)
+ glamo->engine_state[engine] = GLAMO_ENGINE_DISABLED;
+ }
+
+ spin_unlock(&glamo->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(glamo_engine_disable);
+
+int __glamo_engine_suspend(struct glamo_core *glamo, enum glamo_engine engine)
+{
+ int i;
+ const struct glamo_engine_desc *engine_desc = &glamo_engines[engine];
+ const struct glamo_engine_reg_set *reg;
+
+ switch (engine) {
+ case GLAMO_ENGINE_LCD:
+ case GLAMO_ENGINE_MMC:
+ case GLAMO_ENGINE_2D:
+ case GLAMO_ENGINE_CMDQ:
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ reg = engine_desc->regs;
+
+ __reg_set_bit(glamo, GLAMO_REG_HOSTBUS(2),
+ engine_desc->hostbus);
+ for (i = engine_desc->num_regs; i; --i, ++reg) {
+ __reg_set_bit(glamo, reg->reg, reg->mask_suspended);
+ __reg_clear_bit(glamo, reg->reg, reg->mask_enabled);
+ }
+
+ return 0;
+}
+
+int glamo_engine_suspend(struct glamo_core *glamo, enum glamo_engine engine)
+{
+ int ret = 0;
+
+ spin_lock(&glamo->lock);
+
+ if (glamo->engine_state[engine] != GLAMO_ENGINE_SUSPENDED) {
+ ret = __glamo_engine_suspend(glamo, engine);
+ if (!ret)
+ glamo->engine_state[engine] = GLAMO_ENGINE_SUSPENDED;
+ }
+
+ spin_unlock(&glamo->lock);
+
+ return ret;
+}
+EXPORT_SYMBOL_GPL(glamo_engine_suspend);
+
+static const struct glamo_script reset_regs[] = {
+ [GLAMO_ENGINE_LCD] = {
+ GLAMO_REG_CLOCK_LCD, GLAMO_CLOCK_LCD_RESET
+ },
+ [GLAMO_ENGINE_MMC] = {
+ GLAMO_REG_CLOCK_MMC, GLAMO_CLOCK_MMC_RESET
+ },
+ [GLAMO_ENGINE_CMDQ] = {
+ GLAMO_REG_CLOCK_2D, GLAMO_CLOCK_2D_CQ_RESET
+ },
+ [GLAMO_ENGINE_2D] = {
+ GLAMO_REG_CLOCK_2D, GLAMO_CLOCK_2D_RESET
+ },
+ [GLAMO_ENGINE_JPEG] = {
+ GLAMO_REG_CLOCK_JPEG, GLAMO_CLOCK_JPEG_RESET
+ },
+};
+
+void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine)
+{
+ uint16_t reg = reset_regs[engine].reg;
+ uint16_t val = reset_regs[engine].val;
+
+ if (engine >= ARRAY_SIZE(reset_regs)) {
+ dev_warn(&glamo->pdev->dev, "unknown engine %u ", engine);
+ return;
+ }
+
+ spin_lock(&glamo->lock);
+ __reg_set_bit(glamo, reg, val);
+ __reg_clear_bit(glamo, reg, val);
+ spin_unlock(&glamo->lock);
+}
+EXPORT_SYMBOL_GPL(glamo_engine_reset);
+
+int glamo_pll_rate(struct glamo_core *glamo,
+ enum glamo_pll pll)
+{
+ uint16_t reg;
+ unsigned int osci = glamo->pdata->osci_clock_rate;
+
+ switch (pll) {
+ case GLAMO_PLL1:
+ reg = __reg_read(glamo, GLAMO_REG_PLL_GEN1);
+ break;
+ case GLAMO_PLL2:
+ reg = __reg_read(glamo, GLAMO_REG_PLL_GEN3);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return (int)osci * (int)reg;
+}
+EXPORT_SYMBOL_GPL(glamo_pll_rate);
+
+int glamo_engine_reclock(struct glamo_core *glamo,
+ enum glamo_engine engine,
+ int hz)
+{
+ int pll;
+ uint16_t reg, mask, div;
+
+ if (!hz)
+ return -EINVAL;
+
+ switch (engine) {
+ case GLAMO_ENGINE_LCD:
+ pll = GLAMO_PLL1;
+ reg = GLAMO_REG_CLOCK_GEN7;
+ mask = 0xff;
+ break;
+ case GLAMO_ENGINE_MMC:
+ pll = GLAMO_PLL1;
+ reg = GLAMO_REG_CLOCK_GEN8;
+ mask = 0xff;
+ break;
+ default:
+ dev_warn(&glamo->pdev->dev,
+ "reclock of engine 0x%x not supported\n", engine);
+ return -EINVAL;
+ break;
+ }
+
+ pll = glamo_pll_rate(glamo, pll);
+
+ div = pll / hz;
+
+ if (div != 0 && pll / div <= hz)
+ --div;
+
+ if (div > mask)
+ div = mask;
+
+ dev_dbg(&glamo->pdev->dev,
+ "PLL %d, kHZ %d, div %d\n", pll, hz / 1000, div);
+
+ reg_set_bit_mask(glamo, reg, mask, div);
+ mdelay(5); /* wait some time to stabilize */
+
+ return pll / (div + 1);
+}
+EXPORT_SYMBOL_GPL(glamo_engine_reclock);
+
+/***********************************************************************
+ * script support
+ ***********************************************************************/
+
+#define GLAMO_SCRIPT_END 0xffff
+#define GLAMO_SCRIPT_WAIT 0xfffe
+#define GLAMO_SCRIPT_LOCK_PLL 0xfffd
+
+/*
+ * couple of people reported artefacts with 2.6.28 changes, this
+ * allows reversion to 2.6.24 settings
+*/
+static const uint16_t reg_0x200[] = {
+0xe03, /* 0 waits on Async BB R & W, Use PLL 2 for mem bus */
+0xef0, /* 3 waits on Async BB R & W, Use PLL 1 for mem bus */
+0xea0, /* 2 waits on Async BB R & W, Use PLL 1 for mem bus */
+0xe50, /* 1 waits on Async BB R & W, Use PLL 1 for mem bus */
+0xe00, /* 0 waits on Async BB R & W, Use PLL 1 for mem bus */
+0xef3, /* 3 waits on Async BB R & W, Use PLL 2 for mem bus */
+0xea3, /* 2 waits on Async BB R & W, Use PLL 2 for mem bus */
+0xe53, /* 1 waits on Async BB R & W, Use PLL 2 for mem bus */
+};
+
+static int glamo_run_script(struct glamo_core *glamo,
+ const struct glamo_script *script, int len,
+ int may_sleep)
+{
+ int i;
+ uint16_t status;
+ const struct glamo_script *line = script;
+
+ for (i = 0; i < len; ++i, ++line) {
+ switch (line->reg) {
+ case GLAMO_SCRIPT_END:
+ return 0;
+ case GLAMO_SCRIPT_WAIT:
+ if (may_sleep)
+ msleep(line->val);
+ else
+ mdelay(line->val * 4);
+ break;
+ case GLAMO_SCRIPT_LOCK_PLL:
+ /* spin until PLLs lock */
+ do {
+ status = __reg_read(glamo, GLAMO_REG_PLL_GEN5);
+ } while ((status & 3) != 3);
+ break;
+ case 0x200:
+ __reg_write(glamo, line->reg,
+ reg_0x200[slow_memory & 0x8]);
+ break;
+ default:
+ __reg_write(glamo, line->reg, line->val);
+ break;
+ }
+ }
+
+ return 0;
+}
+
+static const struct glamo_script glamo_init_script[] = {
+ { GLAMO_REG_CLOCK_HOST, 0x1000 },
+ { GLAMO_SCRIPT_WAIT, 2 },
+ { GLAMO_REG_CLOCK_MEMORY, 0x1000 },
+ { GLAMO_REG_CLOCK_MEMORY, 0x2000 },
+ { GLAMO_REG_CLOCK_LCD, 0x1000 },
+ { GLAMO_REG_CLOCK_MMC, 0x1000 },
+ { GLAMO_REG_CLOCK_ISP, 0x1000 },
+ { GLAMO_REG_CLOCK_ISP, 0x3000 },
+ { GLAMO_REG_CLOCK_JPEG, 0x1000 },
+ { GLAMO_REG_CLOCK_3D, 0x1000 },
+ { GLAMO_REG_CLOCK_3D, 0x3000 },
+ { GLAMO_REG_CLOCK_2D, 0x1000 },
+ { GLAMO_REG_CLOCK_2D, 0x3000 },
+ { GLAMO_REG_CLOCK_RISC1, 0x1000 },
+ { GLAMO_REG_CLOCK_MPEG, 0x1000 },
+ { GLAMO_REG_CLOCK_MPEG, 0x3000 },
+ { GLAMO_REG_CLOCK_MPROC, 0x1000 /*0x100f*/ },
+ { GLAMO_SCRIPT_WAIT, 2 },
+ { GLAMO_REG_CLOCK_HOST, 0x0000 },
+ { GLAMO_REG_CLOCK_MEMORY, 0x0000 },
+ { GLAMO_REG_CLOCK_LCD, 0x0000 },
+ { GLAMO_REG_CLOCK_MMC, 0x0000 },
+ { GLAMO_REG_PLL_GEN1, 0x05db }, /* 48MHz */
+ { GLAMO_REG_PLL_GEN3, 0x0aba }, /* 90MHz */
+ { GLAMO_SCRIPT_LOCK_PLL, 0 },
+ /*
+ * b9 of this register MUST be zero to get any interrupts on INT#
+ * the other set bits enable all the engine interrupt sources
+ */
+ { GLAMO_REG_IRQ_ENABLE, 0x0100 },
+ { GLAMO_REG_CLOCK_GEN6, 0x2000 },
+ { GLAMO_REG_CLOCK_GEN7, 0x0101 },
+ { GLAMO_REG_CLOCK_GEN8, 0x0100 },
+ { GLAMO_REG_CLOCK_HOST, 0x000d },
+ /*
+ * b7..b4 = 0 = no wait states on read or write
+ * b0 = 1 select PLL2 for Host interface, b1 = enable it
+ */
+ { GLAMO_REG_HOSTBUS(0), 0x0e03 /* this is replaced by script parser */ },
+ { GLAMO_REG_HOSTBUS(1), 0x07ff }, /* TODO: Disable all */
+ { GLAMO_REG_HOSTBUS(10), 0x0000 },
+ { GLAMO_REG_HOSTBUS(11), 0x4000 },
+ { GLAMO_REG_HOSTBUS(12), 0xf00e },
+
+ /* S-Media recommended "set tiling mode to 512 mode for memory access
+ * more efficiency when 640x480" */
+ { GLAMO_REG_MEM_TYPE, 0x0c74 }, /* 8MB, 16 word pg wr+rd */
+ { GLAMO_REG_MEM_GEN, 0xafaf }, /* 63 grants min + max */
+
+ { GLAMO_REG_MEM_TIMING1, 0x0108 },
+ { GLAMO_REG_MEM_TIMING2, 0x0010 }, /* Taa = 3 MCLK */
+ { GLAMO_REG_MEM_TIMING3, 0x0000 },
+ { GLAMO_REG_MEM_TIMING4, 0x0000 }, /* CE1# delay fall/rise */
+ { GLAMO_REG_MEM_TIMING5, 0x0000 }, /* UB# LB# */
+ { GLAMO_REG_MEM_TIMING6, 0x0000 }, /* OE# */
+ { GLAMO_REG_MEM_TIMING7, 0x0000 }, /* WE# */
+ { GLAMO_REG_MEM_TIMING8, 0x1002 }, /* MCLK delay, was 0x1000 */
+ { GLAMO_REG_MEM_TIMING9, 0x6006 },
+ { GLAMO_REG_MEM_TIMING10, 0x00ff },
+ { GLAMO_REG_MEM_TIMING11, 0x0001 },
+ { GLAMO_REG_MEM_POWER1, 0x0020 },
+ { GLAMO_REG_MEM_POWER2, 0x0000 },
+ { GLAMO_REG_MEM_DRAM1, 0x0000 },
+ { GLAMO_SCRIPT_WAIT, 1 },
+ { GLAMO_REG_MEM_DRAM1, 0xc100 },
+ { GLAMO_SCRIPT_WAIT, 1 },
+ { GLAMO_REG_MEM_DRAM1, 0xe100 },
+ { GLAMO_REG_MEM_DRAM2, 0x01d6 },
+ { GLAMO_REG_CLOCK_MEMORY, 0x000b },
+};
+
+/* Find out if we can support this version of the Glamo chip */
+static int __devinit glamo_supported(struct glamo_core *glamo)
+{
+ uint16_t dev_id, rev_id;
+
+ dev_id = __reg_read(glamo, GLAMO_REG_DEVICE_ID);
+ rev_id = __reg_read(glamo, GLAMO_REG_REVISION_ID);
+
+ switch (dev_id) {
+ case 0x3650:
+ switch (rev_id) {
+ case GLAMO_CORE_REV_A2:
+ break;
+ case GLAMO_CORE_REV_A0:
+ case GLAMO_CORE_REV_A1:
+ case GLAMO_CORE_REV_A3:
+ dev_warn(&glamo->pdev->dev, "untested core revision "
+ "%04x, your mileage may vary\n", rev_id);
+ break;
+ default:
+ dev_warn(&glamo->pdev->dev, "unknown glamo revision "
+ "%04x, your mileage may vary\n", rev_id);
+ }
+ break;
+ default:
+ dev_err(&glamo->pdev->dev, "unsupported Glamo device %04x\n",
+ dev_id);
+ return 0;
+ }
+
+ dev_dbg(&glamo->pdev->dev, "Detected Glamo core %04x Revision %04x "
+ "(%uHz CPU / %uHz Memory)\n", dev_id, rev_id,
+ glamo_pll_rate(glamo, GLAMO_PLL1),
+ glamo_pll_rate(glamo, GLAMO_PLL2));
+
+ return 1;
+}
+
+static int __devinit glamo_probe(struct platform_device *pdev)
+{
+ int ret = 0, irq, irq_base;
+ struct glamo_core *glamo;
+ struct resource *mem;
+
+ glamo = kmalloc(GFP_KERNEL, sizeof(*glamo));
+ if (!glamo)
+ return -ENOMEM;
+
+ spin_lock_init(&glamo->lock);
+
+ glamo->pdev = pdev;
+ mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ glamo->irq = platform_get_irq(pdev, 0);
+ glamo->irq_base = irq_base = platform_get_irq(pdev, 1);
+ glamo->pdata = pdev->dev.platform_data;
+
+ if (glamo->irq < 0) {
+ ret = glamo->irq;
+ dev_err(&pdev->dev, "Failed to get platform irq: %d\n", ret);
+ goto err_free;
+ }
+
+ if (irq_base < 0) {
+ ret = glamo->irq;
+ dev_err(&pdev->dev, "Failed to get glamo irq base: %d\n", ret);
+ goto err_free;
+ }
+
+ if (!mem) {
+ dev_err(&pdev->dev, "Failed to get platform memory\n");
+ ret = -ENOENT;
+ goto err_free;
+ }
+
+ if (!glamo->pdata) {
+ dev_err(&pdev->dev, "Missing platform data\n");
+ ret = -ENOENT;
+ goto err_free;
+ }
+
+ /* only request the generic, hostbus and memory controller registers */
+ glamo->mem = request_mem_region(mem->start, GLAMO_REGOFS_VIDCAP,
+ pdev->name);
+
+ if (!glamo->mem) {
+ dev_err(&pdev->dev, "Failed to request io memory region\n");
+ ret = -ENOENT;
+ goto err_free;
+ }
+
+ glamo->base = ioremap(glamo->mem->start, resource_size(glamo->mem));
+ if (!glamo->base) {
+ dev_err(&pdev->dev, "Failed to ioremap() memory region\n");
+ goto err_release_mem_region;
+ }
+
+ /* confirm it isn't insane version */
+ if (!glamo_supported(glamo)) {
+ dev_err(&pdev->dev,
+ "This version of the Glamo is not supported\n");
+ goto err_iounmap;
+ }
+
+ platform_set_drvdata(pdev, glamo);
+
+ /* sysfs */
+ ret = device_create_file(&pdev->dev, &dev_attr_regs);
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Failed to create sysfs file\n");
+ goto err_iounmap;
+ }
+
+ /* init the chip with canned register set */
+ glamo_run_script(glamo, glamo_init_script,
+ ARRAY_SIZE(glamo_init_script), 1);
+
+ /*
+ * finally set the mfd interrupts up
+ */
+ for (irq = irq_base; irq < irq_base + GLAMO_NR_IRQS; ++irq) {
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, IRQF_VALID);
+#else
+ set_irq_noprobe(irq);
+#endif
+ set_irq_chip_data(irq, glamo);
+ set_irq_chip_and_handler(irq, &glamo_irq_chip,
+ handle_level_irq);
+ }
+
+ set_irq_type(glamo->irq, IRQ_TYPE_EDGE_FALLING);
+ set_irq_data(glamo->irq, glamo);
+ set_irq_chained_handler(glamo->irq, glamo_irq_demux_handler);
+ glamo->irq_works = 1;
+
+ ret = mfd_add_devices(&pdev->dev, pdev->id, glamo_cells,
+ ARRAY_SIZE(glamo_cells), mem, glamo->irq_base);
+
+ if (ret) {
+ dev_err(&pdev->dev, "Failed to add child devices: %d\n", ret);
+ goto err_free_irqs;
+ }
+
+ dev_info(&glamo->pdev->dev, "Glamo core PLL1: %uHz, PLL2: %uHz\n",
+ glamo_pll_rate(glamo, GLAMO_PLL1),
+ glamo_pll_rate(glamo, GLAMO_PLL2));
+
+ return 0;
+
+err_free_irqs:
+ disable_irq(glamo->irq);
+ set_irq_chained_handler(glamo->irq, NULL);
+ set_irq_chip_data(glamo->irq, NULL);
+
+ for (irq = irq_base; irq < irq_base + GLAMO_NR_IRQS; ++irq) {
+ set_irq_chip(irq, NULL);
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, 0);
+#else
+ set_irq_probe(irq);
+#endif
+ set_irq_chip_data(irq, NULL);
+ }
+err_iounmap:
+ iounmap(glamo->base);
+err_release_mem_region:
+ release_mem_region(glamo->mem->start, resource_size(glamo->mem));
+err_free:
+ platform_set_drvdata(pdev, NULL);
+ kfree(glamo);
+
+ return ret;
+}
+
+static int __devexit glamo_remove(struct platform_device *pdev)
+{
+ struct glamo_core *glamo = platform_get_drvdata(pdev);
+ int irq;
+ int irq_base = glamo->irq_base;
+
+ mfd_remove_devices(&pdev->dev);
+
+ disable_irq(glamo->irq);
+ set_irq_chained_handler(glamo->irq, NULL);
+ set_irq_chip_data(glamo->irq, NULL);
+
+ for (irq = irq_base; irq < irq_base + GLAMO_NR_IRQS; ++irq) {
+#ifdef CONFIG_ARM
+ set_irq_flags(irq, 0);
+#else
+ set_irq_noprobe();
+#endif
+ set_irq_chip(irq, NULL);
+ set_irq_chip_data(irq, NULL);
+ }
+
+ platform_set_drvdata(pdev, NULL);
+ iounmap(glamo->base);
+ release_mem_region(glamo->mem->start, resource_size(glamo->mem));
+ kfree(glamo);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+#if 0
+static struct glamo_script glamo_resume_script[] = {
+
+ { GLAMO_REG_PLL_GEN1, 0x05db }, /* 48MHz */
+ { GLAMO_REG_PLL_GEN3, 0x0aba }, /* 90MHz */
+ { GLAMO_REG_DFT_GEN6, 1 },
+ { 0xfffe, 100 },
+ { 0xfffd, 0 },
+ { 0x200, 0x0e03 },
+
+ /*
+ * b9 of this register MUST be zero to get any interrupts on INT#
+ * the other set bits enable all the engine interrupt sources
+ */
+ { GLAMO_REG_IRQ_ENABLE, 0x01ff },
+ { GLAMO_REG_CLOCK_HOST, 0x0018 },
+ { GLAMO_REG_CLOCK_GEN5_1, 0x18b1 },
+
+ { GLAMO_REG_MEM_DRAM1, 0x0000 },
+ { 0xfffe, 1 },
+ { GLAMO_REG_MEM_DRAM1, 0xc100 },
+ { 0xfffe, 1 },
+ { GLAMO_REG_MEM_DRAM1, 0xe100 },
+ { GLAMO_REG_MEM_DRAM2, 0x01d6 },
+ { GLAMO_REG_CLOCK_MEMORY, 0x000b },
+};
+#endif
+
+#if 0
+static void glamo_power(struct glamo_core *glamo)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&glamo->lock, flags);
+
+ /*
+Power management
+static const REG_VALUE_MASK_TYPE reg_powerOn[] =
+{
+ { REG_GEN_DFT6, REG_BIT_ALL, REG_DATA(1u << 0) },
+ { REG_GEN_PLL3, 0u, REG_DATA(1u << 13) },
+ { REG_GEN_MEM_CLK, REG_BIT_ALL, REG_BIT_EN_MOCACLK },
+ { REG_MEM_DRAM2, 0u, REG_BIT_EN_DEEP_POWER_DOWN },
+ { REG_MEM_DRAM1, 0u, REG_BIT_SELF_REFRESH }
+};
+
+static const REG_VALUE_MASK_TYPE reg_powerStandby[] =
+{
+ { REG_MEM_DRAM1, REG_BIT_ALL, REG_BIT_SELF_REFRESH },
+ { REG_GEN_MEM_CLK, 0u, REG_BIT_EN_MOCACLK },
+ { REG_GEN_PLL3, REG_BIT_ALL, REG_DATA(1u << 13) },
+ { REG_GEN_DFT5, REG_BIT_ALL, REG_DATA(1u << 0) }
+};
+
+static const REG_VALUE_MASK_TYPE reg_powerSuspend[] =
+{
+ { REG_MEM_DRAM2, REG_BIT_ALL, REG_BIT_EN_DEEP_POWER_DOWN },
+ { REG_GEN_MEM_CLK, 0u, REG_BIT_EN_MOCACLK },
+ { REG_GEN_PLL3, REG_BIT_ALL, REG_DATA(1u << 13) },
+ { REG_GEN_DFT5, REG_BIT_ALL, REG_DATA(1u << 0) }
+};
+*/
+ switch (new_state) {
+ case GLAMO_POWER_ON:
+
+ /*
+ * glamo state on resume is nondeterministic in some
+ * fundamental way, it has also been observed that the
+ * Glamo reset pin can get asserted by, eg, touching it with
+ * a scope probe. So the only answer is to roll with it and
+ * force an external reset on the Glamo during resume.
+ */
+
+
+ break;
+
+ case GLAMO_POWER_SUSPEND:
+
+ break;
+ }
+ spin_unlock_irqrestore(&glamo->lock, flags);
+}
+#endif
+
+static int glamo_suspend(struct device *dev)
+{
+ struct glamo_core *glamo = dev_get_drvdata(dev);
+ int n;
+
+ spin_lock(&glamo->lock);
+
+ /* nuke interrupts */
+ __reg_write(glamo, GLAMO_REG_IRQ_ENABLE, 0x200);
+
+ /* take down each engine before we kill mem and pll */
+ for (n = 0; n < __NUM_GLAMO_ENGINES; n++) {
+ if (glamo->engine_state != GLAMO_ENGINE_DISABLED)
+ __glamo_engine_disable(glamo, n);
+ }
+
+ /* enable self-refresh */
+
+ __reg_write(glamo, GLAMO_REG_MEM_DRAM1,
+ GLAMO_MEM_DRAM1_EN_DRAM_REFRESH |
+ GLAMO_MEM_DRAM1_EN_GATE_CKE |
+ GLAMO_MEM_DRAM1_SELF_REFRESH |
+ GLAMO_MEM_REFRESH_COUNT);
+ __reg_write(glamo, GLAMO_REG_MEM_DRAM1,
+ GLAMO_MEM_DRAM1_EN_MODEREG_SET |
+ GLAMO_MEM_DRAM1_EN_DRAM_REFRESH |
+ GLAMO_MEM_DRAM1_EN_GATE_CKE |
+ GLAMO_MEM_DRAM1_SELF_REFRESH |
+ GLAMO_MEM_REFRESH_COUNT);
+
+ /* force RAM into deep powerdown */
+ __reg_write(glamo, GLAMO_REG_MEM_DRAM2,
+ GLAMO_MEM_DRAM2_DEEP_PWRDOWN |
+ (7 << 6) | /* tRC */
+ (1 << 4) | /* tRP */
+ (1 << 2) | /* tRCD */
+ 2); /* CAS latency */
+
+ /* disable clocks to memory */
+ __reg_write(glamo, GLAMO_REG_CLOCK_MEMORY, 0);
+
+ /* all dividers from OSCI */
+ __reg_set_bit_mask(glamo, GLAMO_REG_CLOCK_GEN5_1, 0x400, 0x400);
+
+ /* PLL2 into bypass */
+ __reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 1 << 12, 1 << 12);
+
+ __reg_write(glamo, GLAMO_BASIC_MMC_EN_TCLK_DLYA1, 0x0e00);
+
+ /* kill PLLS 1 then 2 */
+ __reg_write(glamo, GLAMO_REG_DFT_GEN5, 0x0001);
+ __reg_set_bit_mask(glamo, GLAMO_REG_PLL_GEN3, 1 << 13, 1 << 13);
+
+ spin_unlock(&glamo->lock);
+
+ return 0;
+}
+
+static int glamo_resume(struct device *dev)
+{
+ struct glamo_core *glamo = dev_get_drvdata(dev);
+ int n;
+
+ (glamo->pdata->glamo_external_reset)(0);
+ udelay(10);
+ (glamo->pdata->glamo_external_reset)(1);
+ mdelay(5);
+
+ spin_lock(&glamo->lock);
+
+ glamo_run_script(glamo, glamo_init_script,
+ ARRAY_SIZE(glamo_init_script), 0);
+
+
+ for (n = 0; n < __NUM_GLAMO_ENGINES; n++) {
+ switch (glamo->engine_state[n]) {
+ case GLAMO_ENGINE_SUSPENDED:
+ __glamo_engine_suspend(glamo, n);
+ break;
+ case GLAMO_ENGINE_ENABLED:
+ __glamo_engine_enable(glamo, n);
+ break;
+ default:
+ break;
+ }
+ }
+
+ spin_unlock(&glamo->lock);
+
+ return 0;
+}
+
+static struct dev_pm_ops glamo_pm_ops = {
+ .suspend = glamo_suspend,
+ .resume = glamo_resume,
+ .poweroff = glamo_suspend,
+ .restore = glamo_resume,
+};
+
+#define GLAMO_PM_OPS (&glamo_pm_ops)
+
+#else
+#define GLAMO_PM_OPS NULL
+#endif
+
+static struct platform_driver glamo_driver = {
+ .probe = glamo_probe,
+ .remove = __devexit_p(glamo_remove),
+ .driver = {
+ .name = "glamo3362",
+ .owner = THIS_MODULE,
+ .pm = GLAMO_PM_OPS,
+ },
+};
+
+static int __devinit glamo_init(void)
+{
+ return platform_driver_register(&glamo_driver);
+}
+module_init(glamo_init);
+
+static void __exit glamo_exit(void)
+{
+ platform_driver_unregister(&glamo_driver);
+}
+module_exit(glamo_exit);
+
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("Smedia Glamo 3362 core/resource driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:glamo3362");
diff --git a/drivers/mfd/glamo/glamo-core.h b/drivers/mfd/glamo/glamo-core.h
new file mode 100644
index 00000000000..e5b1a35518a
--- /dev/null
+++ b/drivers/mfd/glamo/glamo-core.h
@@ -0,0 +1,60 @@
+#ifndef __GLAMO_CORE_H
+#define __GLAMO_CORE_H
+
+#include <linux/mfd/glamo.h>
+
+/* for the time being, we put the on-screen framebuffer into the lowest
+ * VRAM space. This should make the code easily compatible with the various
+ * 2MB/4MB/8MB variants of the Smedia chips */
+#define GLAMO_OFFSET_VRAM 0x800000
+#define GLAMO_OFFSET_FB (GLAMO_OFFSET_VRAM)
+
+/* we only allocate the minimum possible size for the framebuffer to make
+ * sure we have sufficient memory for other functions of the chip */
+/*#define GLAMO_FB_SIZE (640*480*4) *//* == 0x12c000 */
+#define GLAMO_INTERNAL_RAM_SIZE 0x800000
+#define GLAMO_MMC_BUFFER_SIZE (64 * 1024)
+#define GLAMO_FB_SIZE (GLAMO_INTERNAL_RAM_SIZE - GLAMO_MMC_BUFFER_SIZE)
+
+enum glamo_pll {
+ GLAMO_PLL1,
+ GLAMO_PLL2,
+};
+
+enum glamo_engine_state {
+ GLAMO_ENGINE_DISABLED,
+ GLAMO_ENGINE_SUSPENDED,
+ GLAMO_ENGINE_ENABLED,
+};
+
+struct glamo_core {
+ int irq;
+ int irq_base;
+ int irq_works; /* 0 means PCB does not support Glamo IRQ */
+ struct resource *mem;
+ void __iomem *base;
+ struct platform_device *pdev;
+ struct glamo_platform_data *pdata;
+ enum glamo_engine_state engine_state[__NUM_GLAMO_ENGINES];
+ spinlock_t lock;
+};
+
+struct glamo_script {
+ uint16_t reg;
+ uint16_t val;
+};
+
+int glamo_pll_rate(struct glamo_core *glamo, enum glamo_pll pll);
+
+int glamo_engine_enable(struct glamo_core *glamo, enum glamo_engine engine);
+int glamo_engine_suspend(struct glamo_core *glamo, enum glamo_engine engine);
+int glamo_engine_disable(struct glamo_core *glamo, enum glamo_engine engine);
+void glamo_engine_reset(struct glamo_core *glamo, enum glamo_engine engine);
+int glamo_engine_reclock(struct glamo_core *glamo,
+ enum glamo_engine engine, int ps);
+
+void glamo_reg_read_batch(struct glamo_core *glamo, uint16_t reg,
+ uint16_t count, uint16_t *values);
+void glamo_reg_write_batch(struct glamo_core *glamo, uint16_t reg,
+ uint16_t count, uint16_t *values);
+#endif /* __GLAMO_CORE_H */
diff --git a/drivers/mfd/glamo/glamo-fb.c b/drivers/mfd/glamo/glamo-fb.c
new file mode 100644
index 00000000000..61a457760f1
--- /dev/null
+++ b/drivers/mfd/glamo/glamo-fb.c
@@ -0,0 +1,981 @@
+/* Smedia Glamo 336x/337x driver
+ *
+ * (C) 2007-2008 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/kernel.h>
+#include <linux/string.h>
+#include <linux/mm.h>
+#include <linux/delay.h>
+#include <linux/fb.h>
+#include <linux/console.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/mfd/glamo.h>
+
+#include <asm/div64.h>
+
+#ifdef CONFIG_PM
+#include <linux/pm.h>
+#endif
+
+#include <linux/glamofb.h>
+
+#include "glamo-regs.h"
+#include "glamo-core.h"
+
+static void glamofb_program_mode(struct glamofb_handle *glamo);
+
+struct glamofb_handle {
+ struct glamo_core *core;
+ struct fb_info *fb;
+ struct device *dev;
+ struct resource *reg;
+ struct resource *fb_res;
+ char __iomem *base;
+ struct glamo_fb_platform_data *mach_info;
+ char __iomem *cursor_addr;
+ int cursor_on;
+ u_int32_t pseudo_pal[16];
+ spinlock_t lock_cmd;
+ int blank_mode;
+ int mode_set; /* 0 if the current display mode hasn't been set on the glamo */
+ int output_enabled; /* 0 if the video output is disabled */
+};
+
+static void glamo_output_enable(struct glamofb_handle *gfb)
+{
+ struct glamo_core *gcore = gfb->core;
+
+ if (gfb->output_enabled)
+ return;
+
+ /* enable the pixel clock if off */
+ glamo_engine_enable(gcore, GLAMO_ENGINE_LCD);
+
+ gfb->output_enabled = 1;
+ if (!gfb->mode_set)
+ glamofb_program_mode(gfb);
+}
+
+static void glamo_output_disable(struct glamofb_handle *gfb)
+{
+ struct glamo_core *gcore = gfb->core;
+
+ if (!gfb->output_enabled)
+ return;
+
+ /* enable the pixel clock if off */
+ glamo_engine_suspend(gcore, GLAMO_ENGINE_LCD);
+
+ gfb->output_enabled = 0;
+}
+
+
+static int reg_read(struct glamofb_handle *glamo,
+ u_int16_t reg)
+{
+ int i = 0;
+
+ for (i = 0; i != 2; i++)
+ nop();
+
+ return readw(glamo->base + reg);
+}
+
+static void reg_write(struct glamofb_handle *glamo,
+ uint16_t reg, uint16_t val)
+{
+ int i = 0;
+
+ for (i = 0; i != 2; i++)
+ nop();
+
+ writew(val, glamo->base + reg);
+}
+
+static struct glamo_script glamo_regs[] = {
+ { GLAMO_REG_LCD_MODE1, 0x0020 },
+ /* no display rotation, no hardware cursor, no dither, no gamma,
+ * no retrace flip, vsync low-active, hsync low active,
+ * no TVCLK, no partial display, hw dest color from fb,
+ * no partial display mode, LCD1, software flip, */
+ { GLAMO_REG_LCD_MODE2, 0x9020 },
+ /* video flip, no ptr, no ptr, dhclk off,
+ * normal mode, no cpuif,
+ * res, serial msb first, single fb, no fr ctrl,
+ * cpu if bits all zero, no crc
+ * 0000 0000 0010 0000 */
+ { GLAMO_REG_LCD_MODE3, 0x0b40 },
+ /* src data rgb565, res, 18bit rgb666
+ * 000 01 011 0100 0000 */
+ { GLAMO_REG_LCD_POLARITY, 0x440c },
+ /* DE high active, no cpu/lcd if, cs0 force low, a0 low active,
+ * np cpu if, 9bit serial data, sclk rising edge latch data
+ * 01 00 0 100 0 000 01 0 0 */
+ /* The following values assume 640*480@16bpp */
+ { GLAMO_REG_LCD_A_BASE1, 0x0000 }, /* display A base address 15:0 */
+ { GLAMO_REG_LCD_A_BASE2, 0x0000 }, /* display A base address 22:16 */
+ { GLAMO_REG_LCD_CURSOR_BASE1, 0xC000 }, /* cursor base address 15:0 */
+ { GLAMO_REG_LCD_CURSOR_BASE2, 0x0012 }, /* cursor base address 22:16 */
+ { GLAMO_REG_LCD_COMMAND2, 0x0000 }, /* display page A */
+};
+
+static int glamofb_run_script(struct glamofb_handle *glamo,
+ struct glamo_script *script, int len)
+{
+ int i;
+
+ for (i = 0; i < len; i++) {
+ struct glamo_script *line = &script[i];
+
+ if (line->reg == 0xffff)
+ return 0;
+ else if (line->reg == 0xfffe)
+ msleep(line->val);
+ else
+ reg_write(glamo, script[i].reg, script[i].val);
+ }
+
+ return 0;
+}
+
+static int glamofb_check_var(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ struct glamofb_handle *glamo = info->par;
+
+ if (var->bits_per_pixel != 16)
+ var->bits_per_pixel = 16;
+
+ var->height = glamo->mach_info->height;
+ var->width = glamo->mach_info->width;
+
+ /* FIXME: set rgb positions */
+ switch (var->bits_per_pixel) {
+ case 16:
+ switch (reg_read(glamo, GLAMO_REG_LCD_MODE3) & 0xc000) {
+ case GLAMO_LCD_SRC_RGB565:
+ var->red.offset = 11;
+ var->green.offset = 5;
+ var->blue.offset = 0;
+ var->red.length = 5;
+ var->green.length = 6;
+ var->blue.length = 5;
+ var->transp.length = 0;
+ break;
+ case GLAMO_LCD_SRC_ARGB1555:
+ var->transp.offset = 15;
+ var->red.offset = 10;
+ var->green.offset = 5;
+ var->blue.offset = 0;
+ var->transp.length = 1;
+ var->red.length = 5;
+ var->green.length = 5;
+ var->blue.length = 5;
+ break;
+ case GLAMO_LCD_SRC_ARGB4444:
+ var->transp.offset = 12;
+ var->red.offset = 8;
+ var->green.offset = 4;
+ var->blue.offset = 0;
+ var->transp.length = 4;
+ var->red.length = 4;
+ var->green.length = 4;
+ var->blue.length = 4;
+ break;
+ }
+ break;
+ case 24:
+ case 32:
+ default:
+ /* The Smedia Glamo doesn't support anything but 16bit color */
+ printk(KERN_ERR
+ "Smedia driver does not [yet?] support 24/32bpp\n");
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void reg_set_bit_mask(struct glamofb_handle *glamo,
+ uint16_t reg, uint16_t mask,
+ uint16_t val)
+{
+ u_int16_t tmp;
+
+ val &= mask;
+
+ tmp = reg_read(glamo, reg);
+ tmp &= ~mask;
+ tmp |= val;
+ reg_write(glamo, reg, tmp);
+}
+
+#define GLAMO_LCD_WIDTH_MASK 0x03FF
+#define GLAMO_LCD_HEIGHT_MASK 0x03FF
+#define GLAMO_LCD_PITCH_MASK 0x07FE
+#define GLAMO_LCD_HV_TOTAL_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_START_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_END_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_DISP_START_MASK 0x03FF
+#define GLAMO_LCD_HV_RETR_DISP_END_MASK 0x03FF
+
+/* the caller has to enxure lock_cmd is held and we are in cmd mode */
+static void __rotate_lcd(struct glamofb_handle *glamo, __u32 rotation)
+{
+ int glamo_rot;
+
+ switch (rotation) {
+ case FB_ROTATE_CW:
+ glamo_rot = GLAMO_LCD_ROT_MODE_90;
+ break;
+ case FB_ROTATE_UD:
+ glamo_rot = GLAMO_LCD_ROT_MODE_180;
+ break;
+ case FB_ROTATE_CCW:
+ glamo_rot = GLAMO_LCD_ROT_MODE_270;
+ break;
+ default:
+ glamo_rot = GLAMO_LCD_ROT_MODE_0;
+ break;
+ }
+
+ reg_set_bit_mask(glamo,
+ GLAMO_REG_LCD_WIDTH,
+ GLAMO_LCD_ROT_MODE_MASK,
+ glamo_rot);
+ reg_set_bit_mask(glamo,
+ GLAMO_REG_LCD_MODE1,
+ GLAMO_LCD_MODE1_ROTATE_EN,
+ (glamo_rot != GLAMO_LCD_ROT_MODE_0) ?
+ GLAMO_LCD_MODE1_ROTATE_EN : 0);
+}
+
+static void glamofb_program_mode(struct glamofb_handle *gfb)
+{
+ int sync, bp, disp, fp, total;
+ unsigned long flags;
+ struct glamo_core *gcore = gfb->core;
+ struct fb_var_screeninfo *var = &gfb->fb->var;
+
+ dev_dbg(&gcore->pdev->dev,
+ "glamofb_program_mode spin_lock_irqsave\n");
+ spin_lock_irqsave(&gfb->lock_cmd, flags);
+
+ if (glamofb_cmd_mode(gfb, 1))
+ goto out_unlock;
+
+ if (var->pixclock)
+ glamo_engine_reclock(gcore, GLAMO_ENGINE_LCD,
+ (1000000000UL / gfb->fb->var.pixclock) * 1000);
+
+ reg_set_bit_mask(gfb,
+ GLAMO_REG_LCD_WIDTH,
+ GLAMO_LCD_WIDTH_MASK,
+ var->xres);
+ reg_set_bit_mask(gfb,
+ GLAMO_REG_LCD_HEIGHT,
+ GLAMO_LCD_HEIGHT_MASK,
+ var->yres);
+ reg_set_bit_mask(gfb,
+ GLAMO_REG_LCD_PITCH,
+ GLAMO_LCD_PITCH_MASK,
+ gfb->fb->fix.line_length);
+
+ /* honour the rotation request */
+ __rotate_lcd(gfb, var->rotate);
+
+ /* update scannout timings */
+ sync = 0;
+ bp = sync + var->hsync_len;
+ disp = bp + var->left_margin;
+ fp = disp + var->xres;
+ total = fp + var->right_margin;
+
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_TOTAL,
+ GLAMO_LCD_HV_TOTAL_MASK, total);
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_RETR_START,
+ GLAMO_LCD_HV_RETR_START_MASK, sync);
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_RETR_END,
+ GLAMO_LCD_HV_RETR_END_MASK, bp);
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_DISP_START,
+ GLAMO_LCD_HV_RETR_DISP_START_MASK, disp);
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_HORIZ_DISP_END,
+ GLAMO_LCD_HV_RETR_DISP_END_MASK, fp);
+
+ sync = 0;
+ bp = sync + var->vsync_len;
+ disp = bp + var->upper_margin;
+ fp = disp + var->yres;
+ total = fp + var->lower_margin;
+
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_TOTAL,
+ GLAMO_LCD_HV_TOTAL_MASK, total);
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_RETR_START,
+ GLAMO_LCD_HV_RETR_START_MASK, sync);
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_RETR_END,
+ GLAMO_LCD_HV_RETR_END_MASK, bp);
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_DISP_START,
+ GLAMO_LCD_HV_RETR_DISP_START_MASK, disp);
+ reg_set_bit_mask(gfb, GLAMO_REG_LCD_VERT_DISP_END,
+ GLAMO_LCD_HV_RETR_DISP_END_MASK, fp);
+
+ glamofb_cmd_mode(gfb, 0);
+
+ gfb->mode_set = 1;
+
+out_unlock:
+ dev_dbg(&gcore->pdev->dev,
+ "glamofb_program_mode spin_unlock_irqrestore\n");
+ spin_unlock_irqrestore(&gfb->lock_cmd, flags);
+}
+
+
+static int glamofb_pan_display(struct fb_var_screeninfo *var,
+ struct fb_info *info)
+{
+ return 0;
+}
+
+static struct fb_videomode *glamofb_find_mode(struct fb_info *info,
+ struct fb_var_screeninfo *var)
+{
+ struct glamofb_handle *glamo = info->par;
+ struct glamo_fb_platform_data *pdata = glamo->mach_info;
+ struct fb_videomode *mode;
+ int i;
+
+ for (i = pdata->num_modes, mode = pdata->modes; i; --i, ++mode) {
+ if (mode->xres == var->xres &&
+ mode->yres == var->yres)
+ return mode;
+ }
+
+ return NULL;
+}
+
+static int glamofb_set_par(struct fb_info *info)
+{
+ struct glamofb_handle *glamo = info->par;
+ struct fb_var_screeninfo *var = &info->var;
+ struct fb_videomode *mode;
+
+ mode = glamofb_find_mode(info, var);
+ if (!mode)
+ return -EINVAL;
+
+ fb_videomode_to_var(var, mode);
+
+ info->mode = mode;
+
+ glamo->mode_set = 0;
+
+ switch (var->rotate) {
+ case FB_ROTATE_CW:
+ case FB_ROTATE_CCW:
+ info->fix.line_length = (var->yres * var->bits_per_pixel) / 8;
+ /* FIXME: Limit pixelclock */
+ var->pixclock *= 2;
+ break;
+ default:
+ info->fix.line_length = (var->xres * var->bits_per_pixel) / 8;
+ break;
+ }
+
+ if (glamo->output_enabled)
+ glamofb_program_mode(glamo);
+
+ return 0;
+}
+
+static int glamofb_blank(int blank_mode, struct fb_info *info)
+{
+ struct glamofb_handle *gfb = info->par;
+
+ dev_dbg(gfb->dev, "glamofb_blank(%u)\n", blank_mode);
+
+ switch (blank_mode) {
+ case FB_BLANK_VSYNC_SUSPEND:
+ case FB_BLANK_HSYNC_SUSPEND:
+ /* FIXME: add pdata hook/flag to indicate whether
+ * we should already switch off pixel clock here */
+ break;
+ case FB_BLANK_POWERDOWN:
+ /* disable the pixel clock */
+ glamo_output_disable(gfb);
+ gfb->blank_mode = blank_mode;
+ break;
+ case FB_BLANK_UNBLANK:
+ case FB_BLANK_NORMAL:
+ glamo_output_enable(gfb);
+ gfb->blank_mode = blank_mode;
+ break;
+ }
+
+ /* FIXME: once we have proper clock management in glamo-core,
+ * we can determine if other units need MCLK1 or the PLL, and
+ * disable it if not used. */
+ return 0;
+}
+
+static inline unsigned int chan_to_field(unsigned int chan,
+ struct fb_bitfield *bf)
+{
+ chan &= 0xffff;
+ chan >>= 16 - bf->length;
+ return chan << bf->offset;
+}
+
+static int glamofb_setcolreg(unsigned regno,
+ unsigned red, unsigned green, unsigned blue,
+ unsigned transp, struct fb_info *info)
+{
+ struct glamofb_handle *glamo = info->par;
+ unsigned int val;
+
+ switch (glamo->fb->fix.visual) {
+ case FB_VISUAL_TRUECOLOR:
+ case FB_VISUAL_DIRECTCOLOR:
+ /* true-colour, use pseuo-palette */
+
+ if (regno < 16) {
+ u32 *pal = glamo->fb->pseudo_palette;
+
+ val = chan_to_field(red, &glamo->fb->var.red);
+ val |= chan_to_field(green, &glamo->fb->var.green);
+ val |= chan_to_field(blue, &glamo->fb->var.blue);
+
+ pal[regno] = val;
+ };
+ break;
+ default:
+ return 1; /* unknown type */
+ }
+
+ return 0;
+}
+
+static int glamofb_ioctl(struct fb_info *info, unsigned int cmd,
+ unsigned long arg)
+{
+ struct glamofb_handle *gfb = (struct glamofb_handle *)info->par;
+ struct glamo_core *gcore = gfb->core;
+ int retval = -ENOTTY;
+
+ switch (cmd) {
+ case GLAMOFB_ENGINE_ENABLE:
+ retval = glamo_engine_enable(gcore, arg);
+ break;
+ case GLAMOFB_ENGINE_DISABLE:
+ retval = glamo_engine_disable(gcore, arg);
+ break;
+ case GLAMOFB_ENGINE_RESET:
+ glamo_engine_reset(gcore, arg);
+ retval = 0;
+ break;
+ default:
+ break;
+ }
+
+ return retval;
+}
+
+
+#ifdef CONFIG_MFD_GLAMO_HWACCEL
+static inline void glamofb_vsync_wait(struct glamofb_handle *glamo,
+ int line, int size, int range)
+{
+ int count[2];
+
+ do {
+ count[0] = reg_read(glamo, GLAMO_REG_LCD_STATUS2) & 0x3ff;
+ count[1] = reg_read(glamo, GLAMO_REG_LCD_STATUS2) & 0x3ff;
+ } while (count[0] != count[1] ||
+ (line < count[0] + range &&
+ size > count[0] - range) ||
+ count[0] < range * 2);
+}
+
+/*
+ * Enable/disable the hardware cursor mode altogether
+ * (for blinking and such, use glamofb_cursor()).
+ */
+static void glamofb_cursor_onoff(struct glamofb_handle *glamo, int on)
+{
+ int y, size;
+
+ if (glamo->cursor_on) {
+ y = reg_read(glamo, GLAMO_REG_LCD_CURSOR_Y_POS);
+ size = reg_read(glamo, GLAMO_REG_LCD_CURSOR_Y_SIZE);
+
+ glamofb_vsync_wait(glamo, y, size, 30);
+ }
+
+ reg_set_bit_mask(glamo, GLAMO_REG_LCD_MODE1,
+ GLAMO_LCD_MODE1_CURSOR_EN,
+ on ? GLAMO_LCD_MODE1_CURSOR_EN : 0);
+ glamo->cursor_on = on;
+
+ /* Hide the cursor by default */
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_SIZE, 0);
+}
+
+static int glamofb_cursor(struct fb_info *info, struct fb_cursor *cursor)
+{
+ struct glamofb_handle *glamo = info->par;
+ unsigned long flags;
+
+ spin_lock_irqsave(&glamo->lock_cmd, flags);
+
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_SIZE,
+ cursor->enable ? cursor->image.width : 0);
+
+ if (cursor->set & FB_CUR_SETPOS) {
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_X_POS,
+ cursor->image.dx);
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_Y_POS,
+ cursor->image.dy);
+ }
+
+ if (cursor->set & FB_CUR_SETCMAP) {
+ uint16_t fg = glamo->pseudo_pal[cursor->image.fg_color];
+ uint16_t bg = glamo->pseudo_pal[cursor->image.bg_color];
+
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_FG_COLOR, fg);
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_BG_COLOR, bg);
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_DST_COLOR, fg);
+ }
+
+ if (cursor->set & FB_CUR_SETHOT)
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_PRESET,
+ (cursor->hot.x << 8) | cursor->hot.y);
+
+ if ((cursor->set & FB_CUR_SETSIZE) ||
+ (cursor->set & (FB_CUR_SETIMAGE | FB_CUR_SETSHAPE))) {
+ int x, y, pitch, op;
+ const uint8_t *pcol = cursor->image.data;
+ const uint8_t *pmsk = cursor->mask;
+ uint8_t __iomem *dst = glamo->cursor_addr;
+ uint8_t dcol = 0;
+ uint8_t dmsk = 0;
+ uint8_t byte = 0;
+
+ if (cursor->image.depth > 1) {
+ spin_unlock_irqrestore(&glamo->lock_cmd, flags);
+ return -EINVAL;
+ }
+
+ pitch = ((cursor->image.width + 7) >> 2) & ~1;
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_PITCH,
+ pitch);
+ reg_write(glamo, GLAMO_REG_LCD_CURSOR_Y_SIZE,
+ cursor->image.height);
+
+ for (y = 0; y < cursor->image.height; y++) {
+ byte = 0;
+ for (x = 0; x < cursor->image.width; x++) {
+ if ((x % 8) == 0) {
+ dcol = *pcol++;
+ dmsk = *pmsk++;
+ } else {
+ dcol >>= 1;
+ dmsk >>= 1;
+ }
+
+ if (cursor->rop == ROP_COPY)
+ op = (dmsk & 1) ?
+ (dcol & 1) ? 1 : 3 : 0;
+ else
+ op = ((dmsk & 1) << 1) |
+ ((dcol & 1) << 0);
+ byte |= op << ((x & 3) << 1);
+
+ if (x % 4 == 3) {
+ writeb(byte, dst + x / 4);
+ byte = 0;
+ }
+ }
+ if (x % 4) {
+ writeb(byte, dst + x / 4);
+ byte = 0;
+ }
+
+ dst += pitch;
+ }
+ }
+
+ spin_unlock_irqrestore(&glamo->lock_cmd, flags);
+
+ return 0;
+}
+#endif
+
+static inline int glamofb_cmdq_empty(struct glamofb_handle *gfb)
+{
+ /* DGCMdQempty -- 1 == command queue is empty */
+ return reg_read(gfb, GLAMO_REG_LCD_STATUS1) & (1 << 15);
+}
+
+/* call holding gfb->lock_cmd when locking, until you unlock */
+int glamofb_cmd_mode(struct glamofb_handle *gfb, int on)
+{
+ int timeout = 2000000;
+
+ dev_dbg(gfb->dev, "glamofb_cmd_mode(gfb=%p, on=%d)\n", gfb, on);
+ if (on) {
+ dev_dbg(gfb->dev, "%s: waiting for cmdq empty: ",
+ __func__);
+ while (!glamofb_cmdq_empty(gfb) && (timeout--))
+ cpu_relax();
+ if (timeout < 0) {
+ printk(KERN_ERR "glamofb cmd_queue never got empty\n");
+ return -EIO;
+ }
+ dev_dbg(gfb->dev, "empty!\n");
+
+ /* display the entire frame then switch to command */
+ reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
+ GLAMO_LCD_CMD_TYPE_DISP |
+ GLAMO_LCD_CMD_DATA_FIRE_VSYNC);
+
+ /* wait until lcd idle */
+ dev_dbg(gfb->dev, "waiting for lcd idle: ");
+ timeout = 2000000;
+ while (!(reg_read(gfb, GLAMO_REG_LCD_STATUS2) & (1 << 12)) &&
+ (timeout--))
+ cpu_relax();
+ if (timeout < 0) {
+ printk(KERN_ERR"*************"
+ "glamofb lcd never idle"
+ "*************\n");
+ return -EIO;
+ }
+
+ mdelay(100);
+
+ dev_dbg(gfb->dev, "cmd mode entered\n");
+
+ } else {
+ /* RGB interface needs vsync/hsync */
+ if (reg_read(gfb, GLAMO_REG_LCD_MODE3) & GLAMO_LCD_MODE3_RGB)
+ reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
+ GLAMO_LCD_CMD_TYPE_DISP |
+ GLAMO_LCD_CMD_DATA_DISP_SYNC);
+
+ reg_write(gfb, GLAMO_REG_LCD_COMMAND1,
+ GLAMO_LCD_CMD_TYPE_DISP |
+ GLAMO_LCD_CMD_DATA_DISP_FIRE);
+ }
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(glamofb_cmd_mode);
+
+
+int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val)
+{
+ int timeout = 200000;
+
+ dev_dbg(gfb->dev, "%s: waiting for cmdq empty\n", __func__);
+ while ((!glamofb_cmdq_empty(gfb)) && (timeout--))
+ yield();
+ if (timeout < 0) {
+ printk(KERN_ERR"*************"
+ "glamofb cmd_queue never got empty"
+ "*************\n");
+ return 1;
+ }
+ dev_dbg(gfb->dev, "idle, writing 0x%04x\n", val);
+
+ reg_write(gfb, GLAMO_REG_LCD_COMMAND1, val);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(glamofb_cmd_write);
+
+static struct fb_ops glamofb_ops = {
+ .owner = THIS_MODULE,
+ .fb_check_var = glamofb_check_var,
+ .fb_pan_display = glamofb_pan_display,
+ .fb_set_par = glamofb_set_par,
+ .fb_blank = glamofb_blank,
+ .fb_setcolreg = glamofb_setcolreg,
+ .fb_ioctl = glamofb_ioctl,
+#ifdef CONFIG_MFD_GLAMO_HWACCEL
+ .fb_cursor = glamofb_cursor,
+#endif
+ .fb_fillrect = cfb_fillrect,
+ .fb_copyarea = cfb_copyarea,
+ .fb_imageblit = cfb_imageblit,
+};
+
+static int glamofb_init_regs(struct glamofb_handle *glamo)
+{
+ struct fb_info *info = glamo->fb;
+
+ glamofb_check_var(&info->var, info);
+ glamofb_run_script(glamo, glamo_regs, ARRAY_SIZE(glamo_regs));
+ glamofb_set_par(info);
+
+ return 0;
+}
+
+static int __init glamofb_probe(struct platform_device *pdev)
+{
+ int rc = -EIO;
+ struct fb_info *fbinfo;
+ struct glamofb_handle *glamofb;
+ struct glamo_core *core = dev_get_drvdata(pdev->dev.parent);
+ struct glamo_fb_platform_data *mach_info;
+
+ printk(KERN_INFO "SMEDIA Glamo frame buffer driver (C) 2007 "
+ "Openmoko, Inc.\n");
+
+ if (!core->pdata || !core->pdata->fb_data)
+ return -ENOENT;
+
+
+ fbinfo = framebuffer_alloc(sizeof(struct glamofb_handle), &pdev->dev);
+ if (!fbinfo)
+ return -ENOMEM;
+
+
+ glamofb = fbinfo->par;
+ glamofb->fb = fbinfo;
+ glamofb->dev = &pdev->dev;
+
+ glamofb->blank_mode = FB_BLANK_POWERDOWN;
+
+ strcpy(fbinfo->fix.id, "SMedia Glamo");
+
+ glamofb->reg = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "glamo-fb-regs");
+ if (!glamofb->reg) {
+ dev_err(&pdev->dev, "platform device with no registers?\n");
+ rc = -ENOENT;
+ goto out_free;
+ }
+
+ glamofb->fb_res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "glamo-fb-mem");
+ if (!glamofb->fb_res) {
+ dev_err(&pdev->dev, "platform device with no memory ?\n");
+ rc = -ENOENT;
+ goto out_free;
+ }
+
+ glamofb->reg = request_mem_region(glamofb->reg->start,
+ resource_size(glamofb->reg),
+ pdev->name);
+ if (!glamofb->reg) {
+ dev_err(&pdev->dev, "failed to request mmio region\n");
+ goto out_free;
+ }
+
+ glamofb->fb_res = request_mem_region(glamofb->fb_res->start,
+ resource_size(glamofb->fb_res),
+ pdev->name);
+ if (!glamofb->fb_res) {
+ dev_err(&pdev->dev, "failed to request vram region\n");
+ goto out_release_reg;
+ }
+
+ /* we want to remap only the registers required for this core
+ * driver. */
+ glamofb->base = ioremap_nocache(glamofb->reg->start,
+ resource_size(glamofb->reg));
+ if (!glamofb->base) {
+ dev_err(&pdev->dev, "failed to ioremap() mmio memory\n");
+ goto out_release_fb;
+ }
+
+ fbinfo->fix.smem_start = (unsigned long) glamofb->fb_res->start;
+ fbinfo->fix.smem_len = (__u32) resource_size(glamofb->fb_res);
+
+ fbinfo->screen_base = ioremap(glamofb->fb_res->start,
+ resource_size(glamofb->fb_res));
+ if (!fbinfo->screen_base) {
+ dev_err(&pdev->dev, "failed to ioremap() vram memory\n");
+ goto out_release_fb;
+ }
+ glamofb->cursor_addr = fbinfo->screen_base + 0x12C000;
+
+ platform_set_drvdata(pdev, glamofb);
+
+ mach_info = core->pdata->fb_data;
+ glamofb->core = core;
+ glamofb->mach_info = mach_info;
+
+ fbinfo->fix.visual = FB_VISUAL_TRUECOLOR;
+ fbinfo->fix.type = FB_TYPE_PACKED_PIXELS;
+ fbinfo->fix.type_aux = 0;
+ fbinfo->fix.xpanstep = 0;
+ fbinfo->fix.ypanstep = 0;
+ fbinfo->fix.ywrapstep = 0;
+ fbinfo->fix.accel = FB_ACCEL_GLAMO;
+
+
+ fbinfo->fbops = &glamofb_ops;
+ fbinfo->flags = FBINFO_FLAG_DEFAULT;
+ fbinfo->pseudo_palette = &glamofb->pseudo_pal;
+
+ fbinfo->mode = mach_info->modes;
+ fb_videomode_to_var(&fbinfo->var, fbinfo->mode);
+ fbinfo->var.bits_per_pixel = 16;
+ fbinfo->var.nonstd = 0;
+ fbinfo->var.activate = FB_ACTIVATE_NOW;
+ fbinfo->var.height = mach_info->height;
+ fbinfo->var.width = mach_info->width;
+ fbinfo->var.accel_flags = 0;
+ fbinfo->var.vmode = FB_VMODE_NONINTERLACED;
+
+ glamo_engine_enable(core, GLAMO_ENGINE_LCD);
+ glamo_engine_reset(core, GLAMO_ENGINE_LCD);
+ glamofb->output_enabled = 1;
+ glamofb->mode_set = 1;
+
+ dev_info(&pdev->dev, "spin_lock_init\n");
+ spin_lock_init(&glamofb->lock_cmd);
+ glamofb_init_regs(glamofb);
+#ifdef CONFIG_MFD_GLAMO_HWACCEL
+ glamofb_cursor_onoff(glamofb, 1);
+#endif
+
+ fb_videomode_to_modelist(mach_info->modes, mach_info->num_modes,
+ &fbinfo->modelist);
+
+ rc = register_framebuffer(fbinfo);
+ if (rc < 0) {
+ dev_err(&pdev->dev, "failed to register framebuffer\n");
+ goto out_unmap_fb;
+ }
+
+ printk(KERN_INFO "fb%d: %s frame buffer device\n",
+ fbinfo->node, fbinfo->fix.id);
+
+ return 0;
+
+out_unmap_fb:
+ iounmap(fbinfo->screen_base);
+ iounmap(glamofb->base);
+out_release_fb:
+ release_mem_region(glamofb->fb_res->start,
+ resource_size(glamofb->fb_res));
+out_release_reg:
+ release_mem_region(glamofb->reg->start,
+ resource_size(glamofb->reg));
+out_free:
+ framebuffer_release(fbinfo);
+ return rc;
+}
+
+static int glamofb_remove(struct platform_device *pdev)
+{
+ struct glamofb_handle *glamofb = platform_get_drvdata(pdev);
+
+ platform_set_drvdata(pdev, NULL);
+ iounmap(glamofb->base);
+ release_mem_region(glamofb->reg->start, resource_size(glamofb->reg));
+ kfree(glamofb);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+
+static int glamofb_suspend(struct device *dev)
+{
+ struct glamofb_handle *gfb = dev_get_drvdata(dev);
+
+ acquire_console_sem();
+ fb_set_suspend(gfb->fb, 1);
+ release_console_sem();
+
+ /* seriously -- nobody is allowed to touch glamo memory when we
+ * are suspended or we lock on nWAIT
+ */
+ /* iounmap(gfb->fb->screen_base); */
+
+ return 0;
+}
+
+static int glamofb_resume(struct device *dev)
+{
+ struct glamofb_handle *gfb = dev_get_drvdata(dev);
+
+ /* OK let's allow framebuffer ops again */
+ /* gfb->fb->screen_base = ioremap(gfb->fb_res->start,
+ resource_size(gfb->fb_res)); */
+ glamo_engine_enable(gfb->core, GLAMO_ENGINE_LCD);
+ glamo_engine_reset(gfb->core, GLAMO_ENGINE_LCD);
+
+ glamofb_init_regs(gfb);
+#ifdef CONFIG_MFD_GLAMO_HWACCEL
+ glamofb_cursor_onoff(gfb, 1);
+#endif
+
+ acquire_console_sem();
+ fb_set_suspend(gfb->fb, 0);
+ release_console_sem();
+
+ return 0;
+}
+
+static struct dev_pm_ops glamofb_pm_ops = {
+ .suspend = glamofb_suspend,
+ .resume = glamofb_resume,
+};
+
+#define GLAMOFB_PM_OPS (&glamofb_pm_ops)
+
+#else
+#define GLAMOFB_PM_OPS NULL
+#endif
+
+static struct platform_driver glamofb_driver = {
+ .probe = glamofb_probe,
+ .remove = glamofb_remove,
+ .driver = {
+ .name = "glamo-fb",
+ .owner = THIS_MODULE,
+ .pm = GLAMOFB_PM_OPS
+ },
+};
+
+static int __devinit glamofb_init(void)
+{
+ return platform_driver_register(&glamofb_driver);
+}
+
+static void __exit glamofb_cleanup(void)
+{
+ platform_driver_unregister(&glamofb_driver);
+}
+
+module_init(glamofb_init);
+module_exit(glamofb_cleanup);
+
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_DESCRIPTION("Smedia Glamo 336x/337x framebuffer driver");
+MODULE_LICENSE("GPL");
diff --git a/drivers/mfd/glamo/glamo-gpio.c b/drivers/mfd/glamo/glamo-gpio.c
new file mode 100644
index 00000000000..1bcec99de41
--- /dev/null
+++ b/drivers/mfd/glamo/glamo-gpio.c
@@ -0,0 +1,284 @@
+/* Smedia Glamo 336x/337x gpio driver
+ *
+ * (C) 2009 Lars-Peter Clausen
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/spinlock.h>
+#include <linux/io.h>
+#include <linux/platform_device.h>
+
+#include <linux/gpio.h>
+#include <linux/mfd/glamo.h>
+
+#include "glamo-core.h"
+#include "glamo-regs.h"
+
+#define GLAMO_NR_GPIO 21
+#define GLAMO_NR_GPIO_REGS DIV_ROUND_UP(GLAMO_NR_GPIO, 4)
+
+#define GLAMO_REG_GPIO(x) (((x) * 2) + GLAMO_REG_GPIO_GEN1)
+
+struct glamo_gpio {
+ struct glamo_core *glamo;
+ struct gpio_chip chip;
+ uint16_t saved_regs[GLAMO_NR_GPIO_REGS];
+};
+
+#define REG_OF_GPIO(gpio) (GLAMO_REG_GPIO(gpio >> 2))
+#define NUM_OF_GPIO(gpio) (gpio & 0x3)
+#define DIRECTION_BIT(gpio) (1 << (NUM_OF_GPIO(gpio) + 0))
+#define OUTPUT_BIT(gpio) (1 << (NUM_OF_GPIO(gpio) + 4))
+#define INPUT_BIT(gpio) (1 << (NUM_OF_GPIO(gpio) + 8))
+#define FUNC_BIT(gpio) (1 << (NUM_OF_GPIO(gpio) + 12))
+
+
+static inline struct glamo_core *chip_to_glamo(struct gpio_chip *chip)
+{
+ return container_of(chip, struct glamo_gpio, chip)->glamo;
+}
+
+static void glamo_gpio_set(struct gpio_chip *chip, unsigned offset, int value)
+{
+ struct glamo_core *glamo = chip_to_glamo(chip);
+ unsigned int reg = REG_OF_GPIO(offset);
+ u_int16_t tmp;
+
+ spin_lock(&glamo->lock);
+ tmp = readw(glamo->base + reg);
+ if (value)
+ tmp |= OUTPUT_BIT(offset);
+ else
+ tmp &= ~OUTPUT_BIT(offset);
+ writew(tmp, glamo->base + reg);
+ spin_unlock(&glamo->lock);
+}
+
+static int glamo_gpio_get(struct gpio_chip *chip, unsigned offset)
+{
+ struct glamo_core *glamo = chip_to_glamo(chip);
+ return !!(readw(glamo->base + REG_OF_GPIO(offset)) & INPUT_BIT(offset));
+}
+
+static int glamo_gpio_request(struct gpio_chip *chip, unsigned offset)
+{
+ struct glamo_core *glamo = chip_to_glamo(chip);
+ unsigned int reg = REG_OF_GPIO(offset);
+ u_int16_t tmp;
+
+ spin_lock(&glamo->lock);
+ tmp = readw(glamo->base + reg);
+ if ((tmp & FUNC_BIT(offset)) == 0) {
+ tmp |= FUNC_BIT(offset);
+ writew(tmp, glamo->base + reg);
+ }
+ spin_unlock(&glamo->lock);
+
+ return 0;
+}
+
+static void glamo_gpio_free(struct gpio_chip *chip, unsigned offset)
+{
+ struct glamo_core *glamo = chip_to_glamo(chip);
+ unsigned int reg = REG_OF_GPIO(offset);
+ u_int16_t tmp;
+
+ spin_lock(&glamo->lock);
+ tmp = readw(glamo->base + reg);
+ if ((tmp & FUNC_BIT(offset)) == 1) {
+ tmp &= ~FUNC_BIT(offset);
+ writew(tmp, glamo->base + reg);
+ }
+ spin_unlock(&glamo->lock);
+}
+
+static int glamo_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
+ int value)
+{
+ struct glamo_core *glamo = chip_to_glamo(chip);
+ unsigned int reg = REG_OF_GPIO(offset);
+ u_int16_t tmp;
+
+ spin_lock(&glamo->lock);
+ tmp = readw(glamo->base + reg);
+ tmp &= ~DIRECTION_BIT(offset);
+
+ if (value)
+ tmp |= OUTPUT_BIT(offset);
+ else
+ tmp &= ~OUTPUT_BIT(offset);
+
+ writew(tmp, glamo->base + reg);
+ spin_unlock(&glamo->lock);
+
+ return 0;
+}
+
+static int glamo_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
+{
+ struct glamo_core *glamo = chip_to_glamo(chip);
+ unsigned int reg = REG_OF_GPIO(offset);
+ u_int16_t tmp;
+
+ spin_lock(&glamo->lock);
+ tmp = readw(glamo->base + reg);
+ if ((tmp & DIRECTION_BIT(offset)) == 0) {
+ tmp |= DIRECTION_BIT(offset);
+ writew(tmp, glamo->base + reg);
+ }
+ spin_unlock(&glamo->lock);
+
+ return 0;
+}
+
+static const struct __devinit gpio_chip glamo_gpio_chip = {
+ .label = "glamo",
+ .request = glamo_gpio_request,
+ .free = glamo_gpio_free,
+ .direction_input = glamo_gpio_direction_input,
+ .get = glamo_gpio_get,
+ .direction_output = glamo_gpio_direction_output,
+ .set = glamo_gpio_set,
+ .base = -1,
+ .ngpio = GLAMO_NR_GPIO,
+ .can_sleep = 0,
+ .owner = THIS_MODULE,
+};
+
+static int __devinit glamo_gpio_probe(struct platform_device *pdev)
+{
+ struct glamo_platform_data *pdata = pdev->dev.parent->platform_data;
+ struct glamo_gpio *glamo_gpio;
+ int ret;
+
+ glamo_gpio = kzalloc(sizeof(struct glamo_gpio), GFP_KERNEL);
+ if (!glamo_gpio)
+ return -ENOMEM;
+
+ glamo_gpio->glamo = dev_get_drvdata(pdev->dev.parent);
+ glamo_gpio->chip = glamo_gpio_chip;
+ glamo_gpio->chip.dev = &pdev->dev;
+ if (pdata && pdata->gpio_data)
+ glamo_gpio->chip.base = pdata->gpio_data->base;
+
+ ret = gpiochip_add(&glamo_gpio->chip);
+
+ if (ret) {
+ dev_err(&pdev->dev, "Could not register gpio chip: %d\n", ret);
+ goto err;
+ }
+
+ platform_set_drvdata(pdev, glamo_gpio);
+
+ if (pdata && pdata->gpio_data && pdata->gpio_data->registered)
+ pdata->gpio_data->registered(&pdev->dev);
+
+ return 0;
+err:
+ kfree(glamo_gpio);
+ return ret;
+}
+
+static int __devexit glamo_gpio_remove(struct platform_device *pdev)
+{
+ struct glamo_gpio *glamo_gpio = platform_get_drvdata(pdev);
+ int ret;
+
+ ret = gpiochip_remove(&glamo_gpio->chip);
+ if (!ret)
+ goto done;
+
+ platform_set_drvdata(pdev, NULL);
+ kfree(glamo_gpio);
+
+done:
+ return ret;
+}
+
+#ifdef CONFIG_PM
+
+static int glamo_gpio_suspend(struct device *dev)
+{
+ struct glamo_gpio *glamo_gpio = dev_get_drvdata(dev);
+ struct glamo_core *glamo = glamo_gpio->glamo;
+ uint16_t *saved_regs = glamo_gpio->saved_regs;
+ int i;
+
+ spin_lock(&glamo->lock);
+ for (i = 0; i < GLAMO_NR_GPIO / 4; ++i)
+ saved_regs[i] = readw(glamo->base + GLAMO_REG_GPIO(i));
+ spin_unlock(&glamo->lock);
+
+ return 0;
+}
+
+static int glamo_gpio_resume(struct device *dev)
+{
+ struct glamo_gpio *glamo_gpio = dev_get_drvdata(dev);
+ struct glamo_core *glamo = glamo_gpio->glamo;
+ uint16_t *saved_regs = glamo_gpio->saved_regs;
+ int i;
+
+ spin_lock(&glamo->lock);
+ for (i = 0; i < GLAMO_NR_GPIO_REGS; ++i)
+ writew(saved_regs[i], glamo->base + GLAMO_REG_GPIO(i));
+ spin_unlock(&glamo->lock);
+ return 0;
+}
+
+static const struct dev_pm_ops glamo_pm_ops = {
+ .suspend = glamo_gpio_suspend,
+ .resume = glamo_gpio_resume,
+ .freeze = glamo_gpio_suspend,
+ .thaw = glamo_gpio_resume,
+};
+
+#define GLAMO_GPIO_PM_OPS (&glamo_pm_ops)
+
+#else
+#define GLAMO_GPIO_PM_OPS NULL
+#endif
+
+static struct platform_driver glamo_gpio_driver = {
+ .driver = {
+ .name = "glamo-gpio",
+ .owner = THIS_MODULE,
+ .pm = GLAMO_GPIO_PM_OPS,
+ },
+ .probe = glamo_gpio_probe,
+ .remove = __devexit_p(glamo_gpio_remove),
+};
+
+static int __devinit glamo_gpio_init(void)
+{
+ return platform_driver_register(&glamo_gpio_driver);
+}
+module_init(glamo_gpio_init);
+
+static void __exit glamo_gpio_exit(void)
+{
+ platform_driver_unregister(&glamo_gpio_driver);
+}
+module_exit(glamo_gpio_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("GPIO interface for the Glamo multimedia device");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:glamo-gpio");
diff --git a/drivers/mfd/glamo/glamo-mci.c b/drivers/mfd/glamo/glamo-mci.c
new file mode 100644
index 00000000000..faeb885c553
--- /dev/null
+++ b/drivers/mfd/glamo/glamo-mci.c
@@ -0,0 +1,1025 @@
+/*
+ * linux/drivers/mmc/host/glamo-mmc.c - Glamo MMC driver
+ *
+ * Copyright (C) 2007 Openmoko, Inc, Andy Green <andy@openmoko.com>
+ * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
+ * Based on S3C MMC driver that was:
+ * Copyright (C) 2004-2006 maintech GmbH, Thomas Kleffel <tk@maintech.de>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/module.h>
+#include <linux/mmc/mmc.h>
+#include <linux/mmc/sd.h>
+#include <linux/mmc/host.h>
+#include <linux/platform_device.h>
+#include <linux/irq.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/workqueue.h>
+#include <linux/crc7.h>
+#include <linux/scatterlist.h>
+#include <linux/io.h>
+#include <linux/regulator/consumer.h>
+#include <linux/err.h>
+#include <linux/mfd/glamo.h>
+
+#include "glamo-core.h"
+#include "glamo-regs.h"
+
+struct glamo_mci_host {
+ struct glamo_mmc_platform_data *pdata;
+ struct platform_device *pdev;
+ struct glamo_core *core;
+ struct mmc_host *mmc;
+ struct resource *mmio_mem;
+ struct resource *data_mem;
+ void __iomem *mmio_base;
+ uint16_t __iomem *data_base;
+
+ unsigned int irq;
+
+ struct regulator *regulator;
+ struct mmc_request *mrq;
+
+ unsigned int clk_rate;
+
+ unsigned short vdd;
+ char power_mode;
+
+ unsigned char request_counter;
+
+ struct timer_list disable_timer;
+
+ struct work_struct irq_work;
+ struct work_struct read_work;
+
+ unsigned clk_enabled:1;
+};
+
+static void glamo_mci_send_request(struct mmc_host *mmc,
+ struct mmc_request *mrq);
+static void glamo_mci_send_command(struct glamo_mci_host *host,
+ struct mmc_command *cmd);
+
+/*
+ * Max SD clock rate
+ *
+ * held at /(3 + 1) due to concerns of 100R recommended series resistor
+ * allows 16MHz @ 4-bit --> 8MBytes/sec raw
+ *
+ * you can override this on kernel commandline using
+ *
+ * glamo_mci.sd_max_clk=10000000
+ *
+ * for example
+ */
+
+static int sd_max_clk = 21000000;
+module_param(sd_max_clk, int, 0644);
+
+/*
+ * Slow SD clock rate
+ *
+ * you can override this on kernel commandline using
+ *
+ * glamo_mci.sd_slow_ratio=8
+ *
+ * for example
+ *
+ * platform callback is used to decide effective clock rate, if not
+ * defined then max is used, if defined and returns nonzero, rate is
+ * divided by this factor
+ */
+
+static int sd_slow_ratio = 8;
+module_param(sd_slow_ratio, int, 0644);
+
+/*
+ * Post-power SD clock rate
+ *
+ * you can override this on kernel commandline using
+ *
+ * glamo_mci.sd_post_power_clock=1000000
+ *
+ * for example
+ *
+ * After changing power to card, clock is held at this rate until first bulk
+ * transfer completes
+ */
+
+static int sd_post_power_clock = 1000000;
+module_param(sd_post_power_clock, int, 0644);
+
+
+static inline void glamo_reg_write(struct glamo_mci_host *glamo,
+ uint16_t reg, uint16_t val)
+{
+ writew(val, glamo->mmio_base + reg);
+}
+
+static inline uint16_t glamo_reg_read(struct glamo_mci_host *glamo,
+ uint16_t reg)
+{
+ return readw(glamo->mmio_base + reg);
+}
+
+static void glamo_reg_set_bit_mask(struct glamo_mci_host *glamo,
+ uint16_t reg, uint16_t mask,
+ uint16_t val)
+{
+ uint16_t tmp;
+
+ val &= mask;
+
+ tmp = glamo_reg_read(glamo, reg);
+ tmp &= ~mask;
+ tmp |= val;
+ glamo_reg_write(glamo, reg, tmp);
+}
+
+static void glamo_mci_reset(struct glamo_mci_host *host)
+{
+ glamo_engine_reset(host->core, GLAMO_ENGINE_MMC);
+
+ glamo_reg_write(host, GLAMO_REG_MMC_WDATADS1,
+ (uint16_t)(host->data_mem->start));
+ glamo_reg_write(host, GLAMO_REG_MMC_WDATADS2,
+ (uint16_t)(host->data_mem->start >> 16));
+
+ glamo_reg_write(host, GLAMO_REG_MMC_RDATADS1,
+ (uint16_t)(host->data_mem->start));
+ glamo_reg_write(host, GLAMO_REG_MMC_RDATADS2,
+ (uint16_t)(host->data_mem->start >> 16));
+
+}
+
+static void glamo_mci_clock_disable(struct glamo_mci_host *host)
+{
+ glamo_engine_suspend(host->core, GLAMO_ENGINE_MMC);
+}
+
+static void glamo_mci_clock_enable(struct glamo_mci_host *host)
+{
+ del_timer_sync(&host->disable_timer);
+
+ glamo_engine_enable(host->core, GLAMO_ENGINE_MMC);
+}
+
+static void glamo_mci_disable_timer(unsigned long data)
+{
+ struct glamo_mci_host *host = (struct glamo_mci_host *)data;
+ glamo_mci_clock_disable(host);
+}
+
+
+static void do_pio_read(struct glamo_mci_host *host, struct mmc_data *data)
+{
+ struct sg_mapping_iter miter;
+ uint16_t __iomem *from_ptr = host->data_base;
+
+ dev_dbg(&host->pdev->dev, "pio_read():\n");
+
+ sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_TO_SG);
+
+ while (sg_miter_next(&miter)) {
+ memcpy(miter.addr, from_ptr, miter.length);
+ from_ptr += miter.length >> 1;
+
+ data->bytes_xfered += miter.length;
+ }
+
+ sg_miter_stop(&miter);
+
+ dev_dbg(&host->pdev->dev, "pio_read(): "
+ "complete (no more data).\n");
+}
+
+static void do_pio_write(struct glamo_mci_host *host, struct mmc_data *data)
+{
+ struct sg_mapping_iter miter;
+ uint16_t __iomem *to_ptr = host->data_base;
+
+ dev_dbg(&host->pdev->dev, "pio_write():\n");
+ sg_miter_start(&miter, data->sg, data->sg_len, SG_MITER_FROM_SG);
+
+ while (sg_miter_next(&miter)) {
+ memcpy(to_ptr, miter.addr, miter.length);
+ to_ptr += miter.length >> 1;
+
+ data->bytes_xfered += miter.length;
+ }
+
+ sg_miter_stop(&miter);
+ dev_dbg(&host->pdev->dev, "pio_write(): complete\n");
+}
+
+static int glamo_mci_set_card_clock(struct glamo_mci_host *host, int freq)
+{
+ int real_rate = 0;
+
+ if (freq) {
+ glamo_mci_clock_enable(host);
+ real_rate = glamo_engine_reclock(host->core, GLAMO_ENGINE_MMC,
+ freq);
+ } else {
+ glamo_mci_clock_disable(host);
+ }
+
+ return real_rate;
+}
+
+static int glamo_mci_wait_idle(struct glamo_mci_host *host,
+ unsigned long timeout)
+{
+ uint16_t status;
+ do {
+ status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+ } while (!(status & GLAMO_STAT1_MMC_IDLE) &&
+ time_is_after_jiffies(timeout));
+
+ if (time_is_before_eq_jiffies(timeout)) {
+ glamo_mci_reset(host);
+ return -ETIMEDOUT;
+ }
+
+ return 0;
+}
+
+static void glamo_mci_request_done(struct glamo_mci_host *host, struct
+mmc_request *mrq)
+{
+ mod_timer(&host->disable_timer, jiffies + HZ / 16);
+ mmc_request_done(host->mmc, mrq);
+}
+
+
+static void glamo_mci_irq_worker(struct work_struct *work)
+{
+ struct glamo_mci_host *host = container_of(work, struct glamo_mci_host,
+ irq_work);
+ struct mmc_request *mrq;
+ struct mmc_command *cmd;
+ uint16_t status;
+
+ if (!host->mrq || !host->mrq->cmd)
+ return;
+
+ mrq = host->mrq;
+ cmd = mrq->cmd;
+
+#if 0
+ if (cmd->data->flags & MMC_DATA_READ)
+ return;
+#endif
+
+ status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+ dev_dbg(&host->pdev->dev, "status = 0x%04x\n", status);
+
+ /* we ignore a data timeout report if we are also told the data came */
+ if (status & GLAMO_STAT1_MMC_RB_DRDY)
+ status &= ~GLAMO_STAT1_MMC_DTOUT;
+
+ if (status & (GLAMO_STAT1_MMC_RTOUT | GLAMO_STAT1_MMC_DTOUT))
+ cmd->error = -ETIMEDOUT;
+ else if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR))
+ cmd->error = -EILSEQ;
+
+ if (cmd->error) {
+ dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n", status);
+ goto done;
+ }
+
+ /* issue STOP if we have been given one to use */
+ if (mrq->stop)
+ glamo_mci_send_command(host, mrq->stop);
+
+ if (cmd->data->flags & MMC_DATA_READ)
+ do_pio_read(host, cmd->data);
+
+ if (mrq->stop)
+ mrq->stop->error = glamo_mci_wait_idle(host, jiffies + HZ);
+
+done:
+ host->mrq = NULL;
+ glamo_mci_request_done(host, cmd->mrq);
+}
+
+static void glamo_mci_read_worker(struct work_struct *work)
+{
+ struct glamo_mci_host *host = container_of(work, struct glamo_mci_host,
+ read_work);
+ struct mmc_command *cmd;
+ uint16_t status;
+ uint16_t blocks_ready;
+ size_t data_read = 0;
+ size_t data_ready;
+ struct scatterlist *sg;
+ uint16_t __iomem *from_ptr = host->data_base;
+ void *sg_pointer;
+
+
+ cmd = host->mrq->cmd;
+ sg = cmd->data->sg;
+ do {
+ status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+
+ if (status & (GLAMO_STAT1_MMC_RTOUT | GLAMO_STAT1_MMC_DTOUT))
+ cmd->error = -ETIMEDOUT;
+ if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR))
+ cmd->error = -EILSEQ;
+ if (cmd->error) {
+ dev_info(&host->pdev->dev, "Error after cmd: 0x%x\n",
+ status);
+ goto done;
+ }
+
+ blocks_ready = glamo_reg_read(host, GLAMO_REG_MMC_RB_BLKCNT);
+ data_ready = blocks_ready * cmd->data->blksz;
+
+ if (data_ready == data_read)
+ yield();
+
+ while (sg && data_read + sg->length <= data_ready) {
+ sg_pointer = page_address(sg_page(sg)) + sg->offset;
+ memcpy(sg_pointer, from_ptr, sg->length);
+ from_ptr += sg->length >> 1;
+
+ data_read += sg->length;
+ sg = sg_next(sg);
+ }
+
+ } while (sg);
+ cmd->data->bytes_xfered = data_read;
+
+ do {
+ status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+ } while (!(status & GLAMO_STAT1_MMC_IDLE));
+
+ if (host->mrq->stop)
+ glamo_mci_send_command(host, host->mrq->stop);
+
+ do {
+ status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+ } while (!(status & GLAMO_STAT1_MMC_IDLE));
+done:
+ host->mrq = NULL;
+ glamo_mci_request_done(host, cmd->mrq);
+}
+
+static irqreturn_t glamo_mci_irq(int irq, void *devid)
+{
+ struct glamo_mci_host *host = (struct glamo_mci_host *)devid;
+ schedule_work(&host->irq_work);
+
+ return IRQ_HANDLED;
+}
+
+static void glamo_mci_send_command(struct glamo_mci_host *host,
+ struct mmc_command *cmd)
+{
+ uint8_t u8a[6];
+ uint16_t fire = 0;
+ unsigned int timeout = 1000000;
+ uint16_t *reg_resp = (uint16_t *)(host->mmio_base + GLAMO_REG_MMC_CMD_RSP1);
+ uint16_t status;
+ int triggers_int = 1;
+
+ /* if we can't do it, reject as busy */
+ if (!(glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1) &
+ GLAMO_STAT1_MMC_IDLE)) {
+ cmd->error = -EBUSY;
+ return;
+ }
+
+ /* create an array in wire order for CRC computation */
+ u8a[0] = 0x40 | (cmd->opcode & 0x3f);
+ u8a[1] = (uint8_t)(cmd->arg >> 24);
+ u8a[2] = (uint8_t)(cmd->arg >> 16);
+ u8a[3] = (uint8_t)(cmd->arg >> 8);
+ u8a[4] = (uint8_t)cmd->arg;
+ u8a[5] = (crc7(0, u8a, 5) << 1) | 0x01;
+
+ /* issue the wire-order array including CRC in register order */
+ glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG1, ((u8a[4] << 8) | u8a[5]));
+ glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG2, ((u8a[2] << 8) | u8a[3]));
+ glamo_reg_write(host, GLAMO_REG_MMC_CMD_REG3, ((u8a[0] << 8) | u8a[1]));
+
+ /* command index toggle */
+ fire |= (host->request_counter & 1) << 12;
+
+ /* set type of command */
+ switch (mmc_cmd_type(cmd)) {
+ case MMC_CMD_BC:
+ fire |= GLAMO_FIRE_MMC_CMDT_BNR;
+ break;
+ case MMC_CMD_BCR:
+ fire |= GLAMO_FIRE_MMC_CMDT_BR;
+ break;
+ case MMC_CMD_AC:
+ fire |= GLAMO_FIRE_MMC_CMDT_AND;
+ break;
+ case MMC_CMD_ADTC:
+ fire |= GLAMO_FIRE_MMC_CMDT_AD;
+ break;
+ }
+ /*
+ * if it expects a response, set the type expected
+ *
+ * R1, Length : 48bit, Normal response
+ * R1b, Length : 48bit, same R1, but added card busy status
+ * R2, Length : 136bit (really 128 bits with CRC snipped)
+ * R3, Length : 48bit (OCR register value)
+ * R4, Length : 48bit, SDIO_OP_CONDITION, Reverse SDIO Card
+ * R5, Length : 48bit, IO_RW_DIRECTION, Reverse SDIO Card
+ * R6, Length : 48bit (RCA register)
+ * R7, Length : 48bit (interface condition, VHS(voltage supplied),
+ * check pattern, CRC7)
+ */
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_R1: /* same index as R6 and R7 */
+ fire |= GLAMO_FIRE_MMC_RSPT_R1;
+ break;
+ case MMC_RSP_R1B:
+ fire |= GLAMO_FIRE_MMC_RSPT_R1b;
+ break;
+ case MMC_RSP_R2:
+ fire |= GLAMO_FIRE_MMC_RSPT_R2;
+ break;
+ case MMC_RSP_R3:
+ fire |= GLAMO_FIRE_MMC_RSPT_R3;
+ break;
+ /* R4 and R5 supported by chip not defined in linux/mmc/core.h (sdio) */
+ }
+ /*
+ * From the command index, set up the command class in the host ctrllr
+ *
+ * missing guys present on chip but couldn't figure out how to use yet:
+ * 0x0 "stream read"
+ * 0x9 "cancel running command"
+ */
+ switch (cmd->opcode) {
+ case MMC_READ_SINGLE_BLOCK:
+ fire |= GLAMO_FIRE_MMC_CC_SBR; /* single block read */
+ break;
+ case MMC_SWITCH: /* 64 byte payload */
+ case SD_APP_SEND_SCR:
+ case MMC_READ_MULTIPLE_BLOCK:
+ /* we will get an interrupt off this */
+ if (!cmd->mrq->stop) {
+ /* multiblock no stop */
+ fire |= GLAMO_FIRE_MMC_CC_MBRNS;
+ } else {
+ /* multiblock with stop */
+ fire |= GLAMO_FIRE_MMC_CC_MBRS;
+ }
+ break;
+ case MMC_WRITE_BLOCK:
+ fire |= GLAMO_FIRE_MMC_CC_SBW; /* single block write */
+ break;
+ case MMC_WRITE_MULTIPLE_BLOCK:
+ if (cmd->mrq->stop) {
+ /* multiblock with stop */
+ fire |= GLAMO_FIRE_MMC_CC_MBWS;
+ } else {
+ /* multiblock NO stop-- 'RESERVED'? */
+ fire |= GLAMO_FIRE_MMC_CC_MBWNS;
+ }
+ break;
+ case MMC_STOP_TRANSMISSION:
+ fire |= GLAMO_FIRE_MMC_CC_STOP; /* STOP */
+ triggers_int = 0;
+ break;
+ default:
+ fire |= GLAMO_FIRE_MMC_CC_BASIC; /* "basic command" */
+ triggers_int = 0;
+ break;
+ }
+
+ if (cmd->data)
+ host->mrq = cmd->mrq;
+
+ /* always largest timeout */
+ glamo_reg_write(host, GLAMO_REG_MMC_TIMEOUT, 0xfff);
+
+ /* Generate interrupt on txfer */
+ glamo_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC, 0xff36,
+ 0x0800 |
+ GLAMO_BASIC_MMC_NO_CLK_RD_WAIT |
+ GLAMO_BASIC_MMC_EN_COMPL_INT |
+ GLAMO_BASIC_MMC_EN_DATA_PUPS |
+ GLAMO_BASIC_MMC_EN_CMD_PUP);
+
+ /* send the command out on the wire */
+ /* dev_info(&host->pdev->dev, "Using FIRE %04X\n", fire); */
+ glamo_reg_write(host, GLAMO_REG_MMC_CMD_FIRE, fire);
+
+ /* we are deselecting card? because it isn't going to ack then... */
+ if ((cmd->opcode == 7) && (cmd->arg == 0))
+ return;
+
+ /*
+ * we must spin until response is ready or timed out
+ * -- we don't get interrupts unless there is a bulk rx
+ */
+ do
+ status = glamo_reg_read(host, GLAMO_REG_MMC_RB_STAT1);
+ while (((((status >> 15) & 1) != (host->request_counter & 1)) ||
+ (!(status & (GLAMO_STAT1_MMC_RB_RRDY |
+ GLAMO_STAT1_MMC_RTOUT |
+ GLAMO_STAT1_MMC_DTOUT |
+ GLAMO_STAT1_MMC_BWERR |
+ GLAMO_STAT1_MMC_BRERR)))) && (timeout--));
+
+ if ((status & (GLAMO_STAT1_MMC_RTOUT |
+ GLAMO_STAT1_MMC_DTOUT)) ||
+ (timeout == 0)) {
+ cmd->error = -ETIMEDOUT;
+ } else if (status & (GLAMO_STAT1_MMC_BWERR | GLAMO_STAT1_MMC_BRERR)) {
+ cmd->error = -EILSEQ;
+ }
+
+ if (cmd->flags & MMC_RSP_PRESENT) {
+ if (cmd->flags & MMC_RSP_136) {
+ cmd->resp[3] = readw(&reg_resp[0]) |
+ (readw(&reg_resp[1]) << 16);
+ cmd->resp[2] = readw(&reg_resp[2]) |
+ (readw(&reg_resp[3]) << 16);
+ cmd->resp[1] = readw(&reg_resp[4]) |
+ (readw(&reg_resp[5]) << 16);
+ cmd->resp[0] = readw(&reg_resp[6]) |
+ (readw(&reg_resp[7]) << 16);
+ } else {
+ cmd->resp[0] = (readw(&reg_resp[0]) >> 8) |
+ (readw(&reg_resp[1]) << 8) |
+ (readw(&reg_resp[2]) << 24);
+ }
+ }
+
+#if 0
+ /* We'll only get an interrupt when all data has been transfered.
+ By starting to copy data when it's avaiable we can increase
+ throughput by up to 30%. */
+ if (cmd->data && (cmd->data->flags & MMC_DATA_READ))
+ schedule_work(&host->read_work);
+#endif
+
+}
+
+static int glamo_mci_prepare_pio(struct glamo_mci_host *host,
+ struct mmc_data *data)
+{
+ /* set up the block info */
+ glamo_reg_write(host, GLAMO_REG_MMC_DATBLKLEN, data->blksz);
+ glamo_reg_write(host, GLAMO_REG_MMC_DATBLKCNT, data->blocks);
+
+ data->bytes_xfered = 0;
+
+ /* if write, prep the write into the shared RAM before the command */
+ if (data->flags & MMC_DATA_WRITE)
+ do_pio_write(host, data);
+
+ dev_dbg(&host->pdev->dev, "(blksz=%d, count=%d)\n",
+ data->blksz, data->blocks);
+ return 0;
+}
+
+static int glamo_mci_irq_poll(struct glamo_mci_host *host,
+ struct mmc_command *cmd)
+{
+ int timeout = 1000000;
+ uint16_t status;
+ /*
+ * if the glamo INT# line isn't wired (*cough* it can happen)
+ * I'm afraid we have to spin on the IRQ status bit and "be
+ * our own INT# line"
+ */
+ /*
+ * we have faith we will get an "interrupt"...
+ * but something insane like suspend problems can mean
+ * we spin here forever, so we timeout after a LONG time
+ */
+ do {
+ status = glamo_reg_read(host, GLAMO_REG_IRQ_STATUS);
+ } while ((--timeout) && !(status & GLAMO_IRQ_MMC));
+
+ if (timeout <= 0) {
+ if (cmd->data->error)
+ cmd->data->error = -ETIMEDOUT;
+ dev_err(&host->pdev->dev, "Payload timeout\n");
+ return -ETIMEDOUT;
+ }
+ /* ack this interrupt source */
+ writew(GLAMO_IRQ_MMC, host->core->base +
+ GLAMO_REG_IRQ_CLEAR);
+
+ /* yay we are an interrupt controller! -- call the ISR
+ * it will stop clock to card
+ */
+ glamo_mci_irq(host->irq, host);
+
+ return 0;
+}
+
+static void glamo_mci_send_request(struct mmc_host *mmc,
+ struct mmc_request *mrq)
+{
+ struct glamo_mci_host *host = mmc_priv(mmc);
+ struct mmc_command *cmd = mrq->cmd;
+
+ glamo_mci_clock_enable(host);
+ host->request_counter++;
+ if (cmd->data) {
+ if (glamo_mci_prepare_pio(host, cmd->data)) {
+ cmd->error = -EIO;
+ cmd->data->error = -EIO;
+ goto done;
+ }
+ }
+
+ dev_dbg(&host->pdev->dev, "cmd 0x%x, "
+ "arg 0x%x data=%p mrq->stop=%p flags 0x%x\n",
+ cmd->opcode, cmd->arg, cmd->data, cmd->mrq->stop,
+ cmd->flags);
+
+ glamo_mci_send_command(host, cmd);
+
+ /*
+ * if we don't have bulk data to take care of, we're done
+ */
+ if (!cmd->data || cmd->error)
+ goto done;
+
+
+ if (!host->core->irq_works) {
+ if (glamo_mci_irq_poll(host, mrq->cmd))
+ goto done;
+ }
+
+ /*
+ * Otherwise can can use the interrupt as async completion --
+ * if there is read data coming, or we wait for write data to complete,
+ * exit without mmc_request_done() as the payload interrupt
+ * will service it
+ */
+ dev_dbg(&host->pdev->dev, "Waiting for payload data\n");
+ return;
+done:
+ if (!cmd->error)
+ cmd->error = glamo_mci_wait_idle(host, jiffies + 2 * HZ);
+ glamo_mci_request_done(host, mrq);
+}
+
+static void glamo_mci_set_power_mode(struct glamo_mci_host *host,
+ unsigned char power_mode)
+{
+ int ret;
+
+ if (power_mode == host->power_mode)
+ return;
+
+ switch (power_mode) {
+ case MMC_POWER_UP:
+ if (host->power_mode == MMC_POWER_OFF) {
+ printk("ENABLE\n");
+ ret = regulator_enable(host->regulator);
+ if (ret)
+ dev_err(&host->pdev->dev,
+ "Failed to enable regulator: %d\n",
+ ret);
+ }
+ break;
+ case MMC_POWER_ON:
+ break;
+ case MMC_POWER_OFF:
+ default:
+ printk("DISABLE\n");
+ glamo_engine_disable(host->core, GLAMO_ENGINE_MMC);
+
+ ret = regulator_disable(host->regulator);
+ if (ret)
+ dev_warn(&host->pdev->dev,
+ "Failed to disable regulator: %d\n",
+ ret);
+ break;
+ }
+ host->power_mode = power_mode;
+}
+
+static void glamo_mci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct glamo_mci_host *host = mmc_priv(mmc);
+ int bus_width = 0;
+ int rate;
+ int sd_drive;
+ int ret;
+
+ /* Set power */
+ glamo_mci_set_power_mode(host, ios->power_mode);
+
+ if (host->vdd != ios->vdd) {
+ ret = mmc_regulator_set_ocr(host->regulator, ios->vdd);
+ if (ret)
+ dev_err(&host->pdev->dev,
+ "Failed to set regulator voltage: %d\n", ret);
+ else
+ host->vdd = ios->vdd;
+ }
+ rate = glamo_mci_set_card_clock(host, ios->clock);
+
+ if ((ios->power_mode == MMC_POWER_ON) ||
+ (ios->power_mode == MMC_POWER_UP)) {
+ dev_info(&host->pdev->dev,
+ "powered (vdd = %hu) clk: %dkHz div=%hu (req: %ukHz). "
+ "Bus width=%d\n", ios->vdd,
+ rate / 1000, 0,
+ ios->clock / 1000, (int)ios->bus_width);
+ } else {
+ dev_info(&host->pdev->dev, "glamo_mci_set_ios: power down.\n");
+ }
+
+ /* set bus width */
+ if (ios->bus_width == MMC_BUS_WIDTH_4)
+ bus_width = GLAMO_BASIC_MMC_EN_4BIT_DATA;
+
+ sd_drive = (rate * 4) / host->clk_rate;
+ if (sd_drive > 3)
+ sd_drive = 3;
+
+ glamo_reg_set_bit_mask(host, GLAMO_REG_MMC_BASIC,
+ GLAMO_BASIC_MMC_EN_4BIT_DATA | 0xb0,
+ bus_width | sd_drive << 6);
+}
+
+
+/*
+ * no physical write protect supported by us
+ */
+static int glamo_mci_get_ro(struct mmc_host *mmc)
+{
+ return 0;
+}
+
+static struct mmc_host_ops glamo_mci_ops = {
+ .request = glamo_mci_send_request,
+ .set_ios = glamo_mci_set_ios,
+ .get_ro = glamo_mci_get_ro,
+};
+
+static int glamo_mci_probe(struct platform_device *pdev)
+{
+ struct mmc_host *mmc;
+ struct glamo_mci_host *host;
+ struct glamo_core *core = dev_get_drvdata(pdev->dev.parent);
+ int ret;
+
+ dev_info(&pdev->dev, "glamo_mci driver (C)2007 Openmoko, Inc\n");
+
+ mmc = mmc_alloc_host(sizeof(struct glamo_mci_host), &pdev->dev);
+ if (!mmc) {
+ ret = -ENOMEM;
+ goto probe_out;
+ }
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ host->pdev = pdev;
+ if (core->pdata)
+ host->pdata = core->pdata->mmc_data;
+ host->power_mode = MMC_POWER_OFF;
+ host->clk_enabled = 0;
+ host->core = core;
+ host->irq = platform_get_irq(pdev, 0);
+
+ INIT_WORK(&host->irq_work, glamo_mci_irq_worker);
+ INIT_WORK(&host->read_work, glamo_mci_read_worker);
+
+ host->regulator = regulator_get(pdev->dev.parent, "SD_3V3");
+ if (IS_ERR(host->regulator)) {
+ dev_err(&pdev->dev, "Cannot proceed without regulator.\n");
+ ret = PTR_ERR(host->regulator);
+ goto probe_free_host;
+ }
+
+ host->mmio_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!host->mmio_mem) {
+ dev_err(&pdev->dev,
+ "failed to get io memory region resouce.\n");
+ ret = -ENOENT;
+ goto probe_regulator_put;
+ }
+
+ host->mmio_mem = request_mem_region(host->mmio_mem->start,
+ resource_size(host->mmio_mem),
+ pdev->name);
+
+ if (!host->mmio_mem) {
+ dev_err(&pdev->dev, "failed to request io memory region.\n");
+ ret = -ENOENT;
+ goto probe_regulator_put;
+ }
+
+ host->mmio_base = ioremap(host->mmio_mem->start,
+ resource_size(host->mmio_mem));
+ if (!host->mmio_base) {
+ dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
+ ret = -EINVAL;
+ goto probe_free_mem_region_mmio;
+ }
+
+
+ /* Get ahold of our data buffer we use for data in and out on MMC */
+ host->data_mem = platform_get_resource(pdev, IORESOURCE_MEM, 1);
+ if (!host->data_mem) {
+ dev_err(&pdev->dev,
+ "failed to get io memory region resource.\n");
+ ret = -ENOENT;
+ goto probe_iounmap_mmio;
+ }
+
+ host->data_mem = request_mem_region(host->data_mem->start,
+ resource_size(host->data_mem),
+ pdev->name);
+
+ if (!host->data_mem) {
+ dev_err(&pdev->dev, "failed to request io memory region.\n");
+ ret = -ENOENT;
+ goto probe_iounmap_mmio;
+ }
+ host->data_base = ioremap(host->data_mem->start,
+ resource_size(host->data_mem));
+
+ if (host->data_base == 0) {
+ dev_err(&pdev->dev, "failed to ioremap() io memory region.\n");
+ ret = -EINVAL;
+ goto probe_free_mem_region_data;
+ }
+
+ ret = request_irq(host->irq, glamo_mci_irq, IRQF_SHARED,
+ pdev->name, host);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to register irq.\n");
+ goto probe_iounmap_data;
+ }
+
+
+ host->vdd = 0;
+ host->clk_rate = glamo_pll_rate(host->core, GLAMO_PLL1);
+
+ /* explain our host controller capabilities */
+ mmc->ops = &glamo_mci_ops;
+ mmc->ocr_avail = mmc_regulator_get_ocrmask(host->regulator);
+ mmc->caps = MMC_CAP_4_BIT_DATA |
+ MMC_CAP_MMC_HIGHSPEED |
+ MMC_CAP_SD_HIGHSPEED;
+ mmc->f_min = host->clk_rate / 256;
+ mmc->f_max = sd_max_clk;
+
+ mmc->max_blk_count = (1 << 16) - 1; /* GLAMO_REG_MMC_RB_BLKCNT */
+ mmc->max_blk_size = (1 << 12) - 1; /* GLAMO_REG_MMC_RB_BLKLEN */
+ mmc->max_req_size = resource_size(host->data_mem);
+ mmc->max_seg_size = mmc->max_req_size;
+ mmc->max_phys_segs = 128;
+ mmc->max_hw_segs = 128;
+
+ if (mmc->ocr_avail < 0) {
+ dev_warn(&pdev->dev,
+ "Failed to get ocr list for regulator: %d.\n",
+ mmc->ocr_avail);
+ mmc->ocr_avail = MMC_VDD_32_33 | MMC_VDD_33_34;
+ }
+
+ platform_set_drvdata(pdev, mmc);
+
+ glamo_engine_enable(host->core, GLAMO_ENGINE_MMC);
+ glamo_mci_reset(host);
+ glamo_engine_disable(host->core, GLAMO_ENGINE_MMC);
+
+ setup_timer(&host->disable_timer, glamo_mci_disable_timer,
+ (unsigned long)host);
+
+ ret = mmc_add_host(mmc);
+ if (ret) {
+ dev_err(&pdev->dev, "failed to add mmc host.\n");
+ goto probe_freeirq;
+ }
+
+ return 0;
+
+probe_freeirq:
+ free_irq(host->irq, host);
+probe_iounmap_data:
+ iounmap(host->data_base);
+probe_free_mem_region_data:
+ release_mem_region(host->data_mem->start,
+ resource_size(host->data_mem));
+probe_iounmap_mmio:
+ iounmap(host->mmio_base);
+probe_free_mem_region_mmio:
+ release_mem_region(host->mmio_mem->start,
+ resource_size(host->mmio_mem));
+probe_regulator_put:
+ regulator_put(host->regulator);
+probe_free_host:
+ mmc_free_host(mmc);
+probe_out:
+ return ret;
+}
+
+static int glamo_mci_remove(struct platform_device *pdev)
+{
+ struct mmc_host *mmc = platform_get_drvdata(pdev);
+ struct glamo_mci_host *host = mmc_priv(mmc);
+
+ free_irq(host->irq, host);
+
+ mmc_remove_host(mmc);
+ iounmap(host->mmio_base);
+ iounmap(host->data_base);
+ release_mem_region(host->mmio_mem->start,
+ resource_size(host->mmio_mem));
+ release_mem_region(host->data_mem->start,
+ resource_size(host->data_mem));
+
+ regulator_put(host->regulator);
+
+ mmc_free_host(mmc);
+
+ glamo_engine_disable(host->core, GLAMO_ENGINE_MMC);
+ return 0;
+}
+
+
+#ifdef CONFIG_PM
+
+static int glamo_mci_suspend(struct device *dev)
+{
+ struct mmc_host *mmc = dev_get_drvdata(dev);
+ struct glamo_mci_host *host = mmc_priv(mmc);
+ int ret;
+
+ cancel_work_sync(&host->irq_work);
+
+ ret = mmc_suspend_host(mmc, PMSG_SUSPEND);
+
+ return ret;
+}
+
+static int glamo_mci_resume(struct device *dev)
+{
+ struct mmc_host *mmc = dev_get_drvdata(dev);
+ struct glamo_mci_host *host = mmc_priv(mmc);
+ int ret;
+
+
+ glamo_mci_reset(host);
+ glamo_engine_enable(host->core, GLAMO_ENGINE_MMC);
+ mdelay(10);
+
+ ret = mmc_resume_host(host->mmc);
+
+ return 0;
+}
+
+static struct dev_pm_ops glamo_mci_pm_ops = {
+ .suspend = glamo_mci_suspend,
+ .resume = glamo_mci_resume,
+ .freeze = glamo_mci_suspend,
+ .thaw = glamo_mci_resume,
+};
+#define GLAMO_MCI_PM_OPS (&glamo_mci_pm_ops)
+
+#else /* CONFIG_PM */
+#define GLAMO_MCI_PM_OPS NULL
+#endif /* CONFIG_PM */
+
+
+static struct platform_driver glamo_mci_driver = {
+ .probe = glamo_mci_probe,
+ .remove = glamo_mci_remove,
+ .driver = {
+ .name = "glamo-mci",
+ .owner = THIS_MODULE,
+ .pm = GLAMO_MCI_PM_OPS,
+ },
+};
+
+static int __init glamo_mci_init(void)
+{
+ platform_driver_register(&glamo_mci_driver);
+ return 0;
+}
+module_init(glamo_mci_init);
+
+static void __exit glamo_mci_exit(void)
+{
+ platform_driver_unregister(&glamo_mci_driver);
+}
+module_exit(glamo_mci_exit);
+
+MODULE_DESCRIPTION("Glamo MMC/SD Card Interface driver");
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
diff --git a/drivers/mfd/glamo/glamo-regs.h b/drivers/mfd/glamo/glamo-regs.h
new file mode 100644
index 00000000000..59848e1122e
--- /dev/null
+++ b/drivers/mfd/glamo/glamo-regs.h
@@ -0,0 +1,630 @@
+#ifndef _GLAMO_REGS_H
+#define _GLAMO_REGS_H
+
+/* Smedia Glamo 336x/337x driver
+ *
+ * (C) 2007 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ */
+
+enum glamo_regster_offsets {
+ GLAMO_REGOFS_GENERIC = 0x0000,
+ GLAMO_REGOFS_HOSTBUS = 0x0200,
+ GLAMO_REGOFS_MEMORY = 0x0300,
+ GLAMO_REGOFS_VIDCAP = 0x0400,
+ GLAMO_REGOFS_ISP = 0x0500,
+ GLAMO_REGOFS_JPEG = 0x0800,
+ GLAMO_REGOFS_MPEG = 0x0c00,
+ GLAMO_REGOFS_LCD = 0x1100,
+ GLAMO_REGOFS_MMC = 0x1400,
+ GLAMO_REGOFS_MPROC0 = 0x1500,
+ GLAMO_REGOFS_MPROC1 = 0x1580,
+ GLAMO_REGOFS_CMDQUEUE = 0x1600,
+ GLAMO_REGOFS_RISC = 0x1680,
+ GLAMO_REGOFS_2D = 0x1700,
+ GLAMO_REGOFS_3D = 0x1b00,
+ GLAMO_REGOFS_END = 0x2400,
+};
+
+
+enum glamo_register_generic {
+ GLAMO_REG_GCONF1 = 0x0000,
+ GLAMO_REG_GCONF2 = 0x0002,
+#define GLAMO_REG_DEVICE_ID GLAMO_REG_GCONF2
+ GLAMO_REG_GCONF3 = 0x0004,
+#define GLAMO_REG_REVISION_ID GLAMO_REG_GCONF3
+ GLAMO_REG_IRQ_GEN1 = 0x0006,
+#define GLAMO_REG_IRQ_ENABLE GLAMO_REG_IRQ_GEN1
+ GLAMO_REG_IRQ_GEN2 = 0x0008,
+#define GLAMO_REG_IRQ_SET GLAMO_REG_IRQ_GEN2
+ GLAMO_REG_IRQ_GEN3 = 0x000a,
+#define GLAMO_REG_IRQ_CLEAR GLAMO_REG_IRQ_GEN3
+ GLAMO_REG_IRQ_GEN4 = 0x000c,
+#define GLAMO_REG_IRQ_STATUS GLAMO_REG_IRQ_GEN4
+ GLAMO_REG_CLOCK_HOST = 0x0010,
+ GLAMO_REG_CLOCK_MEMORY = 0x0012,
+ GLAMO_REG_CLOCK_LCD = 0x0014,
+ GLAMO_REG_CLOCK_MMC = 0x0016,
+ GLAMO_REG_CLOCK_ISP = 0x0018,
+ GLAMO_REG_CLOCK_JPEG = 0x001a,
+ GLAMO_REG_CLOCK_3D = 0x001c,
+ GLAMO_REG_CLOCK_2D = 0x001e,
+ GLAMO_REG_CLOCK_RISC1 = 0x0020, /* 3365 only? */
+ GLAMO_REG_CLOCK_RISC2 = 0x0022, /* 3365 only? */
+ GLAMO_REG_CLOCK_MPEG = 0x0024,
+ GLAMO_REG_CLOCK_MPROC = 0x0026,
+
+ GLAMO_REG_CLOCK_GEN5_1 = 0x0030,
+ GLAMO_REG_CLOCK_GEN5_2 = 0x0032,
+ GLAMO_REG_CLOCK_GEN6 = 0x0034,
+ GLAMO_REG_CLOCK_GEN7 = 0x0036,
+ GLAMO_REG_CLOCK_GEN8 = 0x0038,
+ GLAMO_REG_CLOCK_GEN9 = 0x003a,
+ GLAMO_REG_CLOCK_GEN10 = 0x003c,
+ GLAMO_REG_CLOCK_GEN11 = 0x003e,
+ GLAMO_REG_PLL_GEN1 = 0x0040,
+ GLAMO_REG_PLL_GEN2 = 0x0042,
+ GLAMO_REG_PLL_GEN3 = 0x0044,
+ GLAMO_REG_PLL_GEN4 = 0x0046,
+ GLAMO_REG_PLL_GEN5 = 0x0048,
+ GLAMO_REG_GPIO_GEN1 = 0x0050,
+ GLAMO_REG_GPIO_GEN2 = 0x0052,
+ GLAMO_REG_GPIO_GEN3 = 0x0054,
+ GLAMO_REG_GPIO_GEN4 = 0x0056,
+ GLAMO_REG_GPIO_GEN5 = 0x0058,
+ GLAMO_REG_GPIO_GEN6 = 0x005a,
+ GLAMO_REG_GPIO_GEN7 = 0x005c,
+ GLAMO_REG_GPIO_GEN8 = 0x005e,
+ GLAMO_REG_GPIO_GEN9 = 0x0060,
+ GLAMO_REG_GPIO_GEN10 = 0x0062,
+ GLAMO_REG_DFT_GEN1 = 0x0070,
+ GLAMO_REG_DFT_GEN2 = 0x0072,
+ GLAMO_REG_DFT_GEN3 = 0x0074,
+ GLAMO_REG_DFT_GEN4 = 0x0076,
+
+ GLAMO_REG_DFT_GEN5 = 0x01e0,
+ GLAMO_REG_DFT_GEN6 = 0x01f0,
+};
+
+#define GLAMO_REG_HOSTBUS(x) (GLAMO_REGOFS_HOSTBUS-2+(x*2))
+
+#define REG_MEM(x) (GLAMO_REGOFS_MEMORY+(x))
+#define GLAMO_REG_MEM_TIMING(x) (GLAMO_REG_MEM_TIMING1-2+(x*2))
+
+enum glamo_register_mem {
+ GLAMO_REG_MEM_TYPE = REG_MEM(0x00),
+ GLAMO_REG_MEM_GEN = REG_MEM(0x02),
+ GLAMO_REG_MEM_TIMING1 = REG_MEM(0x04),
+ GLAMO_REG_MEM_TIMING2 = REG_MEM(0x06),
+ GLAMO_REG_MEM_TIMING3 = REG_MEM(0x08),
+ GLAMO_REG_MEM_TIMING4 = REG_MEM(0x0a),
+ GLAMO_REG_MEM_TIMING5 = REG_MEM(0x0c),
+ GLAMO_REG_MEM_TIMING6 = REG_MEM(0x0e),
+ GLAMO_REG_MEM_TIMING7 = REG_MEM(0x10),
+ GLAMO_REG_MEM_TIMING8 = REG_MEM(0x12),
+ GLAMO_REG_MEM_TIMING9 = REG_MEM(0x14),
+ GLAMO_REG_MEM_TIMING10 = REG_MEM(0x16),
+ GLAMO_REG_MEM_TIMING11 = REG_MEM(0x18),
+ GLAMO_REG_MEM_POWER1 = REG_MEM(0x1a),
+ GLAMO_REG_MEM_POWER2 = REG_MEM(0x1c),
+ GLAMO_REG_MEM_LCD_BUF1 = REG_MEM(0x1e),
+ GLAMO_REG_MEM_LCD_BUF2 = REG_MEM(0x20),
+ GLAMO_REG_MEM_LCD_BUF3 = REG_MEM(0x22),
+ GLAMO_REG_MEM_LCD_BUF4 = REG_MEM(0x24),
+ GLAMO_REG_MEM_BIST1 = REG_MEM(0x26),
+ GLAMO_REG_MEM_BIST2 = REG_MEM(0x28),
+ GLAMO_REG_MEM_BIST3 = REG_MEM(0x2a),
+ GLAMO_REG_MEM_BIST4 = REG_MEM(0x2c),
+ GLAMO_REG_MEM_BIST5 = REG_MEM(0x2e),
+ GLAMO_REG_MEM_MAH1 = REG_MEM(0x30),
+ GLAMO_REG_MEM_MAH2 = REG_MEM(0x32),
+ GLAMO_REG_MEM_DRAM1 = REG_MEM(0x34),
+ GLAMO_REG_MEM_DRAM2 = REG_MEM(0x36),
+ GLAMO_REG_MEM_CRC = REG_MEM(0x38),
+};
+
+#define GLAMO_MEM_TYPE_MASK 0x03
+
+enum glamo_reg_mem_dram1 {
+ /* b0 - b10 == refresh period, 1 -> 2048 clocks */
+ GLAMO_MEM_DRAM1_EN_GATE_CLK = (1 << 11),
+ GLAMO_MEM_DRAM1_SELF_REFRESH = (1 << 12),
+ GLAMO_MEM_DRAM1_EN_GATE_CKE = (1 << 13),
+ GLAMO_MEM_DRAM1_EN_DRAM_REFRESH = (1 << 14),
+ GLAMO_MEM_DRAM1_EN_MODEREG_SET = (1 << 15),
+};
+
+enum glamo_reg_mem_dram2 {
+ GLAMO_MEM_DRAM2_DEEP_PWRDOWN = (1 << 12),
+};
+
+enum glamo_irq_index {
+ GLAMO_IRQIDX_HOSTBUS = 0,
+ GLAMO_IRQIDX_JPEG = 1,
+ GLAMO_IRQIDX_MPEG = 2,
+ GLAMO_IRQIDX_MPROC1 = 3,
+ GLAMO_IRQIDX_MPROC0 = 4,
+ GLAMO_IRQIDX_CMDQUEUE = 5,
+ GLAMO_IRQIDX_2D = 6,
+ GLAMO_IRQIDX_MMC = 7,
+ GLAMO_IRQIDX_RISC = 8,
+};
+
+enum glamo_irq {
+ GLAMO_IRQ_HOSTBUS = (1 << GLAMO_IRQIDX_HOSTBUS),
+ GLAMO_IRQ_JPEG = (1 << GLAMO_IRQIDX_JPEG),
+ GLAMO_IRQ_MPEG = (1 << GLAMO_IRQIDX_MPEG),
+ GLAMO_IRQ_MPROC1 = (1 << GLAMO_IRQIDX_MPROC1),
+ GLAMO_IRQ_MPROC0 = (1 << GLAMO_IRQIDX_MPROC0),
+ GLAMO_IRQ_CMDQUEUE = (1 << GLAMO_IRQIDX_CMDQUEUE),
+ GLAMO_IRQ_2D = (1 << GLAMO_IRQIDX_2D),
+ GLAMO_IRQ_MMC = (1 << GLAMO_IRQIDX_MMC),
+ GLAMO_IRQ_RISC = (1 << GLAMO_IRQIDX_RISC),
+};
+
+enum glamo_reg_clock_host {
+ GLAMO_CLOCK_HOST_DG_BCLK = 0x0001,
+ GLAMO_CLOCK_HOST_DG_M0CLK = 0x0004,
+ GLAMO_CLOCK_HOST_RESET = 0x1000,
+};
+
+enum glamo_reg_clock_mem {
+ GLAMO_CLOCK_MEM_DG_M1CLK = 0x0001,
+ GLAMO_CLOCK_MEM_EN_M1CLK = 0x0002,
+ GLAMO_CLOCK_MEM_DG_MOCACLK = 0x0004,
+ GLAMO_CLOCK_MEM_EN_MOCACLK = 0x0008,
+ GLAMO_CLOCK_MEM_RESET = 0x1000,
+ GLAMO_CLOCK_MOCA_RESET = 0x2000,
+};
+
+enum glamo_reg_clock_lcd {
+ GLAMO_CLOCK_LCD_DG_DCLK = 0x0001,
+ GLAMO_CLOCK_LCD_EN_DCLK = 0x0002,
+ GLAMO_CLOCK_LCD_DG_DMCLK = 0x0004,
+ GLAMO_CLOCK_LCD_EN_DMCLK = 0x0008,
+ GLAMO_CLOCK_LCD_EN_DHCLK = 0x0020,
+ GLAMO_CLOCK_LCD_DG_M5CLK = 0x0040,
+ GLAMO_CLOCK_LCD_EN_M5CLK = 0x0080,
+ GLAMO_CLOCK_LCD_RESET = 0x1000,
+};
+
+enum glamo_reg_clock_mmc {
+ GLAMO_CLOCK_MMC_DG_TCLK = 0x0001,
+ GLAMO_CLOCK_MMC_EN_TCLK = 0x0002,
+ GLAMO_CLOCK_MMC_DG_M9CLK = 0x0004,
+ GLAMO_CLOCK_MMC_EN_M9CLK = 0x0008,
+ GLAMO_CLOCK_MMC_RESET = 0x1000,
+};
+
+enum glamo_reg_basic_mmc {
+ /* set to disable CRC error rejection */
+ GLAMO_BASIC_MMC_DISABLE_CRC = 0x0001,
+ /* enable completion interrupt */
+ GLAMO_BASIC_MMC_EN_COMPL_INT = 0x0002,
+ /* stop MMC clock while enforced idle waiting for data from card */
+ GLAMO_BASIC_MMC_NO_CLK_RD_WAIT = 0x0004,
+ /* 0 = 1-bit bus to card, 1 = use 4-bit bus (has to be negotiated) */
+ GLAMO_BASIC_MMC_EN_4BIT_DATA = 0x0008,
+ /* enable 75K pullups on D3..D0 */
+ GLAMO_BASIC_MMC_EN_DATA_PUPS = 0x0010,
+ /* enable 75K pullup on CMD */
+ GLAMO_BASIC_MMC_EN_CMD_PUP = 0x0020,
+ /* IO drive strength 00=weak -> 11=strongest */
+ GLAMO_BASIC_MMC_EN_DR_STR0 = 0x0040,
+ GLAMO_BASIC_MMC_EN_DR_STR1 = 0x0080,
+ /* TCLK delay stage A, 0000 = 500ps --> 1111 = 8ns */
+ GLAMO_BASIC_MMC_EN_TCLK_DLYA0 = 0x0100,
+ GLAMO_BASIC_MMC_EN_TCLK_DLYA1 = 0x0200,
+ GLAMO_BASIC_MMC_EN_TCLK_DLYA2 = 0x0400,
+ GLAMO_BASIC_MMC_EN_TCLK_DLYA3 = 0x0800,
+ /* TCLK delay stage B (cumulative), 0000 = 500ps --> 1111 = 8ns */
+ GLAMO_BASIC_MMC_EN_TCLK_DLYB0 = 0x1000,
+ GLAMO_BASIC_MMC_EN_TCLK_DLYB1 = 0x2000,
+ GLAMO_BASIC_MMC_EN_TCLK_DLYB2 = 0x4000,
+ GLAMO_BASIC_MMC_EN_TCLK_DLYB3 = 0x8000,
+};
+
+enum glamo_reg_stat1_mmc {
+ /* command "counter" (really: toggle) */
+ GLAMO_STAT1_MMC_CMD_CTR = 0x8000,
+ /* engine is idle */
+ GLAMO_STAT1_MMC_IDLE = 0x4000,
+ /* readback response is ready */
+ GLAMO_STAT1_MMC_RB_RRDY = 0x0200,
+ /* readback data is ready */
+ GLAMO_STAT1_MMC_RB_DRDY = 0x0100,
+ /* no response timeout */
+ GLAMO_STAT1_MMC_RTOUT = 0x0020,
+ /* no data timeout */
+ GLAMO_STAT1_MMC_DTOUT = 0x0010,
+ /* CRC error on block write */
+ GLAMO_STAT1_MMC_BWERR = 0x0004,
+ /* CRC error on block read */
+ GLAMO_STAT1_MMC_BRERR = 0x0002
+};
+
+enum glamo_reg_fire_mmc {
+ /* command "counter" (really: toggle)
+ * the STAT1 register reflects this so you can ensure you don't look
+ * at status for previous command
+ */
+ GLAMO_FIRE_MMC_CMD_CTR = 0x8000,
+ /* sets kind of response expected */
+ GLAMO_FIRE_MMC_RES_MASK = 0x0700,
+ /* sets command type */
+ GLAMO_FIRE_MMC_TYP_MASK = 0x00C0,
+ /* sets command class */
+ GLAMO_FIRE_MMC_CLS_MASK = 0x000F,
+};
+
+enum glamo_fire_mmc_response_types {
+ GLAMO_FIRE_MMC_RSPT_R1 = 0x0000,
+ GLAMO_FIRE_MMC_RSPT_R1b = 0x0100,
+ GLAMO_FIRE_MMC_RSPT_R2 = 0x0200,
+ GLAMO_FIRE_MMC_RSPT_R3 = 0x0300,
+ GLAMO_FIRE_MMC_RSPT_R4 = 0x0400,
+ GLAMO_FIRE_MMC_RSPT_R5 = 0x0500,
+};
+
+enum glamo_fire_mmc_command_types {
+ /* broadcast, no response */
+ GLAMO_FIRE_MMC_CMDT_BNR = 0x0000,
+ /* broadcast, with response */
+ GLAMO_FIRE_MMC_CMDT_BR = 0x0040,
+ /* addressed, no data */
+ GLAMO_FIRE_MMC_CMDT_AND = 0x0080,
+ /* addressed, with data */
+ GLAMO_FIRE_MMC_CMDT_AD = 0x00C0,
+};
+
+enum glamo_fire_mmc_command_class {
+ /* "Stream Read" */
+ GLAMO_FIRE_MMC_CC_STRR = 0x0000,
+ /* Single Block Read */
+ GLAMO_FIRE_MMC_CC_SBR = 0x0001,
+ /* Multiple Block Read With Stop */
+ GLAMO_FIRE_MMC_CC_MBRS = 0x0002,
+ /* Multiple Block Read No Stop */
+ GLAMO_FIRE_MMC_CC_MBRNS = 0x0003,
+ /* RESERVED for "Stream Write" */
+ GLAMO_FIRE_MMC_CC_STRW = 0x0004,
+ /* "Stream Write" */
+ GLAMO_FIRE_MMC_CC_SBW = 0x0005,
+ /* RESERVED for Multiple Block Write With Stop */
+ GLAMO_FIRE_MMC_CC_MBWS = 0x0006,
+ /* Multiple Block Write No Stop */
+ GLAMO_FIRE_MMC_CC_MBWNS = 0x0007,
+ /* STOP command */
+ GLAMO_FIRE_MMC_CC_STOP = 0x0008,
+ /* Cancel on Running Command */
+ GLAMO_FIRE_MMC_CC_CANCL = 0x0009,
+ /* "Basic Command" */
+ GLAMO_FIRE_MMC_CC_BASIC = 0x000a,
+};
+
+/* these are offsets from the start of the MMC register region */
+enum glamo_register_mmc {
+ /* MMC command, b15..8 = cmd arg b7..0; b7..1 = CRC; b0 = end bit */
+ GLAMO_REG_MMC_CMD_REG1 = 0x00,
+ /* MMC command, b15..0 = cmd arg b23 .. 8 */
+ GLAMO_REG_MMC_CMD_REG2 = 0x02,
+ /* MMC command, b15=start, b14=transmission,
+ * b13..8=cmd idx, b7..0=cmd arg b31..24
+ */
+ GLAMO_REG_MMC_CMD_REG3 = 0x04,
+ GLAMO_REG_MMC_CMD_FIRE = 0x06,
+ GLAMO_REG_MMC_CMD_RSP1 = 0x10,
+ GLAMO_REG_MMC_CMD_RSP2 = 0x12,
+ GLAMO_REG_MMC_CMD_RSP3 = 0x14,
+ GLAMO_REG_MMC_CMD_RSP4 = 0x16,
+ GLAMO_REG_MMC_CMD_RSP5 = 0x18,
+ GLAMO_REG_MMC_CMD_RSP6 = 0x1a,
+ GLAMO_REG_MMC_CMD_RSP7 = 0x1c,
+ GLAMO_REG_MMC_CMD_RSP8 = 0x1e,
+ GLAMO_REG_MMC_RB_STAT1 = 0x20,
+ GLAMO_REG_MMC_RB_BLKCNT = 0x22,
+ GLAMO_REG_MMC_RB_BLKLEN = 0x24,
+ GLAMO_REG_MMC_BASIC = 0x30,
+ GLAMO_REG_MMC_RDATADS1 = 0x34,
+ GLAMO_REG_MMC_RDATADS2 = 0x36,
+ GLAMO_REG_MMC_WDATADS1 = 0x38,
+ GLAMO_REG_MMC_WDATADS2 = 0x3a,
+ GLAMO_REG_MMC_DATBLKCNT = 0x3c,
+ GLAMO_REG_MMC_DATBLKLEN = 0x3e,
+ GLAMO_REG_MMC_TIMEOUT = 0x40,
+
+};
+
+enum glamo_reg_clock_isp {
+ GLAMO_CLOCK_ISP_DG_I1CLK = 0x0001,
+ GLAMO_CLOCK_ISP_EN_I1CLK = 0x0002,
+ GLAMO_CLOCK_ISP_DG_CCLK = 0x0004,
+ GLAMO_CLOCK_ISP_EN_CCLK = 0x0008,
+ GLAMO_CLOCK_ISP_EN_SCLK = 0x0020,
+ GLAMO_CLOCK_ISP_DG_M2CLK = 0x0040,
+ GLAMO_CLOCK_ISP_EN_M2CLK = 0x0080,
+ GLAMO_CLOCK_ISP_DG_M15CLK = 0x0100,
+ GLAMO_CLOCK_ISP_EN_M15CLK = 0x0200,
+ GLAMO_CLOCK_ISP1_RESET = 0x1000,
+ GLAMO_CLOCK_ISP2_RESET = 0x2000,
+};
+
+enum glamo_reg_clock_jpeg {
+ GLAMO_CLOCK_JPEG_DG_JCLK = 0x0001,
+ GLAMO_CLOCK_JPEG_EN_JCLK = 0x0002,
+ GLAMO_CLOCK_JPEG_DG_M3CLK = 0x0004,
+ GLAMO_CLOCK_JPEG_EN_M3CLK = 0x0008,
+ GLAMO_CLOCK_JPEG_RESET = 0x1000,
+};
+
+enum glamo_reg_clock_2d {
+ GLAMO_CLOCK_2D_DG_GCLK = 0x0001,
+ GLAMO_CLOCK_2D_EN_GCLK = 0x0002,
+ GLAMO_CLOCK_2D_DG_M7CLK = 0x0004,
+ GLAMO_CLOCK_2D_EN_M7CLK = 0x0008,
+ GLAMO_CLOCK_2D_DG_M6CLK = 0x0010,
+ GLAMO_CLOCK_2D_EN_M6CLK = 0x0020,
+ GLAMO_CLOCK_2D_RESET = 0x1000,
+ GLAMO_CLOCK_2D_CQ_RESET = 0x2000,
+};
+
+enum glamo_reg_clock_3d {
+ GLAMO_CLOCK_3D_DG_ECLK = 0x0001,
+ GLAMO_CLOCK_3D_EN_ECLK = 0x0002,
+ GLAMO_CLOCK_3D_DG_RCLK = 0x0004,
+ GLAMO_CLOCK_3D_EN_RCLK = 0x0008,
+ GLAMO_CLOCK_3D_DG_M8CLK = 0x0010,
+ GLAMO_CLOCK_3D_EN_M8CLK = 0x0020,
+ GLAMO_CLOCK_3D_BACK_RESET = 0x1000,
+ GLAMO_CLOCK_3D_FRONT_RESET = 0x2000,
+};
+
+enum glamo_reg_clock_mpeg {
+ GLAMO_CLOCK_MPEG_DG_X0CLK = 0x0001,
+ GLAMO_CLOCK_MPEG_EN_X0CLK = 0x0002,
+ GLAMO_CLOCK_MPEG_DG_X1CLK = 0x0004,
+ GLAMO_CLOCK_MPEG_EN_X1CLK = 0x0008,
+ GLAMO_CLOCK_MPEG_DG_X2CLK = 0x0010,
+ GLAMO_CLOCK_MPEG_EN_X2CLK = 0x0020,
+ GLAMO_CLOCK_MPEG_DG_X3CLK = 0x0040,
+ GLAMO_CLOCK_MPEG_EN_X3CLK = 0x0080,
+ GLAMO_CLOCK_MPEG_DG_X4CLK = 0x0100,
+ GLAMO_CLOCK_MPEG_EN_X4CLK = 0x0200,
+ GLAMO_CLOCK_MPEG_DG_X6CLK = 0x0400,
+ GLAMO_CLOCK_MPEG_EN_X6CLK = 0x0800,
+ GLAMO_CLOCK_MPEG_ENC_RESET = 0x1000,
+ GLAMO_CLOCK_MPEG_DEC_RESET = 0x2000,
+};
+
+enum glamo_reg_clock51 {
+ GLAMO_CLOCK_GEN51_EN_DIV_MCLK = 0x0001,
+ GLAMO_CLOCK_GEN51_EN_DIV_SCLK = 0x0002,
+ GLAMO_CLOCK_GEN51_EN_DIV_JCLK = 0x0004,
+ GLAMO_CLOCK_GEN51_EN_DIV_DCLK = 0x0008,
+ GLAMO_CLOCK_GEN51_EN_DIV_DMCLK = 0x0010,
+ GLAMO_CLOCK_GEN51_EN_DIV_DHCLK = 0x0020,
+ GLAMO_CLOCK_GEN51_EN_DIV_GCLK = 0x0040,
+ GLAMO_CLOCK_GEN51_EN_DIV_TCLK = 0x0080,
+ /* FIXME: higher bits */
+};
+
+enum glamo_reg_hostbus2 {
+ GLAMO_HOSTBUS2_MMIO_EN_ISP = 0x0001,
+ GLAMO_HOSTBUS2_MMIO_EN_JPEG = 0x0002,
+ GLAMO_HOSTBUS2_MMIO_EN_MPEG = 0x0004,
+ GLAMO_HOSTBUS2_MMIO_EN_LCD = 0x0008,
+ GLAMO_HOSTBUS2_MMIO_EN_MMC = 0x0010,
+ GLAMO_HOSTBUS2_MMIO_EN_MICROP0 = 0x0020,
+ GLAMO_HOSTBUS2_MMIO_EN_MICROP1 = 0x0040,
+ GLAMO_HOSTBUS2_MMIO_EN_CQ = 0x0080,
+ GLAMO_HOSTBUS2_MMIO_EN_RISC = 0x0100,
+ GLAMO_HOSTBUS2_MMIO_EN_2D = 0x0200,
+ GLAMO_HOSTBUS2_MMIO_EN_3D = 0x0400,
+};
+
+/* LCD Controller */
+
+#define REG_LCD(x) (x)
+enum glamo_reg_lcd {
+ GLAMO_REG_LCD_MODE1 = REG_LCD(0x00),
+ GLAMO_REG_LCD_MODE2 = REG_LCD(0x02),
+ GLAMO_REG_LCD_MODE3 = REG_LCD(0x04),
+ GLAMO_REG_LCD_WIDTH = REG_LCD(0x06),
+ GLAMO_REG_LCD_HEIGHT = REG_LCD(0x08),
+ GLAMO_REG_LCD_POLARITY = REG_LCD(0x0a),
+ GLAMO_REG_LCD_A_BASE1 = REG_LCD(0x0c),
+ GLAMO_REG_LCD_A_BASE2 = REG_LCD(0x0e),
+ GLAMO_REG_LCD_B_BASE1 = REG_LCD(0x10),
+ GLAMO_REG_LCD_B_BASE2 = REG_LCD(0x12),
+ GLAMO_REG_LCD_C_BASE1 = REG_LCD(0x14),
+ GLAMO_REG_LCD_C_BASE2 = REG_LCD(0x16),
+ GLAMO_REG_LCD_PITCH = REG_LCD(0x18),
+ /* RES */
+ GLAMO_REG_LCD_HORIZ_TOTAL = REG_LCD(0x1c),
+ /* RES */
+ GLAMO_REG_LCD_HORIZ_RETR_START = REG_LCD(0x20),
+ /* RES */
+ GLAMO_REG_LCD_HORIZ_RETR_END = REG_LCD(0x24),
+ /* RES */
+ GLAMO_REG_LCD_HORIZ_DISP_START = REG_LCD(0x28),
+ /* RES */
+ GLAMO_REG_LCD_HORIZ_DISP_END = REG_LCD(0x2c),
+ /* RES */
+ GLAMO_REG_LCD_VERT_TOTAL = REG_LCD(0x30),
+ /* RES */
+ GLAMO_REG_LCD_VERT_RETR_START = REG_LCD(0x34),
+ /* RES */
+ GLAMO_REG_LCD_VERT_RETR_END = REG_LCD(0x38),
+ /* RES */
+ GLAMO_REG_LCD_VERT_DISP_START = REG_LCD(0x3c),
+ /* RES */
+ GLAMO_REG_LCD_VERT_DISP_END = REG_LCD(0x40),
+ /* RES */
+ GLAMO_REG_LCD_POL = REG_LCD(0x44),
+ GLAMO_REG_LCD_DATA_START = REG_LCD(0x46),
+ GLAMO_REG_LCD_FRATE_CONTRO = REG_LCD(0x48),
+ GLAMO_REG_LCD_DATA_CMD_HDR = REG_LCD(0x4a),
+ GLAMO_REG_LCD_SP_START = REG_LCD(0x4c),
+ GLAMO_REG_LCD_SP_END = REG_LCD(0x4e),
+ GLAMO_REG_LCD_CURSOR_BASE1 = REG_LCD(0x50),
+ GLAMO_REG_LCD_CURSOR_BASE2 = REG_LCD(0x52),
+ GLAMO_REG_LCD_CURSOR_PITCH = REG_LCD(0x54),
+ GLAMO_REG_LCD_CURSOR_X_SIZE = REG_LCD(0x56),
+ GLAMO_REG_LCD_CURSOR_Y_SIZE = REG_LCD(0x58),
+ GLAMO_REG_LCD_CURSOR_X_POS = REG_LCD(0x5a),
+ GLAMO_REG_LCD_CURSOR_Y_POS = REG_LCD(0x5c),
+ GLAMO_REG_LCD_CURSOR_PRESET = REG_LCD(0x5e),
+ GLAMO_REG_LCD_CURSOR_FG_COLOR = REG_LCD(0x60),
+ /* RES */
+ GLAMO_REG_LCD_CURSOR_BG_COLOR = REG_LCD(0x64),
+ /* RES */
+ GLAMO_REG_LCD_CURSOR_DST_COLOR = REG_LCD(0x68),
+ /* RES */
+ GLAMO_REG_LCD_STATUS1 = REG_LCD(0x80),
+ GLAMO_REG_LCD_STATUS2 = REG_LCD(0x82),
+ GLAMO_REG_LCD_STATUS3 = REG_LCD(0x84),
+ GLAMO_REG_LCD_STATUS4 = REG_LCD(0x86),
+ /* RES */
+ GLAMO_REG_LCD_COMMAND1 = REG_LCD(0xa0),
+ GLAMO_REG_LCD_COMMAND2 = REG_LCD(0xa2),
+ /* RES */
+ GLAMO_REG_LCD_WFORM_DELAY1 = REG_LCD(0xb0),
+ GLAMO_REG_LCD_WFORM_DELAY2 = REG_LCD(0xb2),
+ /* RES */
+ GLAMO_REG_LCD_GAMMA_CORR = REG_LCD(0x100),
+ /* RES */
+ GLAMO_REG_LCD_GAMMA_R_ENTRY01 = REG_LCD(0x110),
+ GLAMO_REG_LCD_GAMMA_R_ENTRY23 = REG_LCD(0x112),
+ GLAMO_REG_LCD_GAMMA_R_ENTRY45 = REG_LCD(0x114),
+ GLAMO_REG_LCD_GAMMA_R_ENTRY67 = REG_LCD(0x116),
+ GLAMO_REG_LCD_GAMMA_R_ENTRY8 = REG_LCD(0x118),
+ /* RES */
+ GLAMO_REG_LCD_GAMMA_G_ENTRY01 = REG_LCD(0x130),
+ GLAMO_REG_LCD_GAMMA_G_ENTRY23 = REG_LCD(0x132),
+ GLAMO_REG_LCD_GAMMA_G_ENTRY45 = REG_LCD(0x134),
+ GLAMO_REG_LCD_GAMMA_G_ENTRY67 = REG_LCD(0x136),
+ GLAMO_REG_LCD_GAMMA_G_ENTRY8 = REG_LCD(0x138),
+ /* RES */
+ GLAMO_REG_LCD_GAMMA_B_ENTRY01 = REG_LCD(0x150),
+ GLAMO_REG_LCD_GAMMA_B_ENTRY23 = REG_LCD(0x152),
+ GLAMO_REG_LCD_GAMMA_B_ENTRY45 = REG_LCD(0x154),
+ GLAMO_REG_LCD_GAMMA_B_ENTRY67 = REG_LCD(0x156),
+ GLAMO_REG_LCD_GAMMA_B_ENTRY8 = REG_LCD(0x158),
+ /* RES */
+ GLAMO_REG_LCD_SRAM_DRIVING1 = REG_LCD(0x160),
+ GLAMO_REG_LCD_SRAM_DRIVING2 = REG_LCD(0x162),
+ GLAMO_REG_LCD_SRAM_DRIVING3 = REG_LCD(0x164),
+};
+
+enum glamo_reg_lcd_mode1 {
+ GLAMO_LCD_MODE1_PWRSAVE = 0x0001,
+ GLAMO_LCD_MODE1_PARTIAL_PRT = 0x0002,
+ GLAMO_LCD_MODE1_HWFLIP = 0x0004,
+ GLAMO_LCD_MODE1_LCD2 = 0x0008,
+ /* RES */
+ GLAMO_LCD_MODE1_PARTIAL_MODE = 0x0020,
+ GLAMO_LCD_MODE1_CURSOR_DSTCOLOR = 0x0040,
+ GLAMO_LCD_MODE1_PARTIAL_ENABLE = 0x0080,
+ GLAMO_LCD_MODE1_TVCLK_IN_ENABLE = 0x0100,
+ GLAMO_LCD_MODE1_HSYNC_HIGH_ACT = 0x0200,
+ GLAMO_LCD_MODE1_VSYNC_HIGH_ACT = 0x0400,
+ GLAMO_LCD_MODE1_HSYNC_FLIP = 0x0800,
+ GLAMO_LCD_MODE1_GAMMA_COR_EN = 0x1000,
+ GLAMO_LCD_MODE1_DITHER_EN = 0x2000,
+ GLAMO_LCD_MODE1_CURSOR_EN = 0x4000,
+ GLAMO_LCD_MODE1_ROTATE_EN = 0x8000,
+};
+
+enum glamo_reg_lcd_mode2 {
+ GLAMO_LCD_MODE2_CRC_CHECK_EN = 0x0001,
+ GLAMO_LCD_MODE2_DCMD_PER_LINE = 0x0002,
+ GLAMO_LCD_MODE2_NOUSE_BDEF = 0x0004,
+ GLAMO_LCD_MODE2_OUT_POS_MODE = 0x0008,
+ GLAMO_LCD_MODE2_FRATE_CTRL_EN = 0x0010,
+ GLAMO_LCD_MODE2_SINGLE_BUFFER = 0x0020,
+ GLAMO_LCD_MODE2_SER_LSB_TO_MSB = 0x0040,
+ /* FIXME */
+};
+
+enum glamo_reg_lcd_mode3 {
+ /* LCD color source data format */
+ GLAMO_LCD_SRC_RGB565 = 0x0000,
+ GLAMO_LCD_SRC_ARGB1555 = 0x4000,
+ GLAMO_LCD_SRC_ARGB4444 = 0x8000,
+ /* interface type */
+ GLAMO_LCD_MODE3_LCD = 0x1000,
+ GLAMO_LCD_MODE3_RGB = 0x0800,
+ GLAMO_LCD_MODE3_CPU = 0x0000,
+ /* mode */
+ GLAMO_LCD_MODE3_RGB332 = 0x0000,
+ GLAMO_LCD_MODE3_RGB444 = 0x0100,
+ GLAMO_LCD_MODE3_RGB565 = 0x0200,
+ GLAMO_LCD_MODE3_RGB666 = 0x0300,
+ /* depth */
+ GLAMO_LCD_MODE3_6BITS = 0x0000,
+ GLAMO_LCD_MODE3_8BITS = 0x0010,
+ GLAMO_LCD_MODE3_9BITS = 0x0020,
+ GLAMO_LCD_MODE3_16BITS = 0x0030,
+ GLAMO_LCD_MODE3_18BITS = 0x0040,
+};
+
+enum glamo_lcd_rot_mode {
+ GLAMO_LCD_ROT_MODE_0 = 0x0000,
+ GLAMO_LCD_ROT_MODE_180 = 0x2000,
+ GLAMO_LCD_ROT_MODE_MIRROR = 0x4000,
+ GLAMO_LCD_ROT_MODE_FLIP = 0x6000,
+ GLAMO_LCD_ROT_MODE_90 = 0x8000,
+ GLAMO_LCD_ROT_MODE_270 = 0xa000,
+};
+#define GLAMO_LCD_ROT_MODE_MASK 0xe000
+
+enum glamo_lcd_cmd_type {
+ GLAMO_LCD_CMD_TYPE_DISP = 0x0000,
+ GLAMO_LCD_CMD_TYPE_PARALLEL = 0x4000,
+ GLAMO_LCD_CMD_TYPE_SERIAL = 0x8000,
+ GLAMO_LCD_CMD_TYPE_SERIAL_DIRECT = 0xc000,
+};
+#define GLAMO_LCD_CMD_TYPE_MASK 0xc000
+
+enum glamo_lcd_cmds {
+ GLAMO_LCD_CMD_DATA_DISP_FIRE = 0x00,
+ GLAMO_LCD_CMD_DATA_DISP_SYNC = 0x01, /* RGB only */
+ /* switch to command mode, no display */
+ GLAMO_LCD_CMD_DATA_FIRE_NO_DISP = 0x02,
+ /* display until VSYNC, switch to command */
+ GLAMO_LCD_CMD_DATA_FIRE_VSYNC = 0x11,
+ /* display until HSYNC, switch to command */
+ GLAMO_LCD_CMD_DATA_FIRE_HSYNC = 0x12,
+ /* display until VSYNC, 1 black frame, VSYNC, switch to command */
+ GLAMO_LCD_CMD_DATA_FIRE_VSYNC_B = 0x13,
+ /* don't care about display and switch to command */
+ GLAMO_LCD_CMD_DATA_FIRE_FREE = 0x14, /* RGB only */
+ /* don't care about display, keep data display but disable data,
+ * and switch to command */
+ GLAMO_LCD_CMD_DATA_FIRE_FREE_D = 0x15, /* RGB only */
+};
+
+enum glamo_core_revisions {
+ GLAMO_CORE_REV_A0 = 0x0000,
+ GLAMO_CORE_REV_A1 = 0x0001,
+ GLAMO_CORE_REV_A2 = 0x0002,
+ GLAMO_CORE_REV_A3 = 0x0003,
+};
+
+#endif /* _GLAMO_REGS_H */
diff --git a/drivers/mfd/pcf50633-adc.c b/drivers/mfd/pcf50633-adc.c
index 3d31e97d6a4..6d2e8466df1 100644
--- a/drivers/mfd/pcf50633-adc.c
+++ b/drivers/mfd/pcf50633-adc.c
@@ -209,17 +209,16 @@ static void pcf50633_adc_irq(int irq, void *data)
static int __devinit pcf50633_adc_probe(struct platform_device *pdev)
{
- struct pcf50633_subdev_pdata *pdata = pdev->dev.platform_data;
struct pcf50633_adc *adc;
adc = kzalloc(sizeof(*adc), GFP_KERNEL);
if (!adc)
return -ENOMEM;
- adc->pcf = pdata->pcf;
+ adc->pcf = dev_to_pcf50633(pdev->dev.parent);
platform_set_drvdata(pdev, adc);
- pcf50633_register_irq(pdata->pcf, PCF50633_IRQ_ADCRDY,
+ pcf50633_register_irq(adc->pcf, PCF50633_IRQ_ADCRDY,
pcf50633_adc_irq, adc);
mutex_init(&adc->queue_mutex);
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index d26d7747175..41ac3a52df1 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -290,7 +290,7 @@ out:
int pcf50633_irq_mask(struct pcf50633 *pcf, int irq)
{
- dev_info(pcf->dev, "Masking IRQ %d\n", irq);
+ dev_dbg(pcf->dev, "Masking IRQ %d\n", irq);
return __pcf50633_irq_mask_set(pcf, irq, 1);
}
@@ -298,7 +298,7 @@ EXPORT_SYMBOL_GPL(pcf50633_irq_mask);
int pcf50633_irq_unmask(struct pcf50633 *pcf, int irq)
{
- dev_info(pcf->dev, "Unmasking IRQ %d\n", irq);
+ dev_dbg(pcf->dev, "Unmasking IRQ %d\n", irq);
return __pcf50633_irq_mask_set(pcf, irq, 0);
}
@@ -345,23 +345,26 @@ static void pcf50633_irq_worker(struct work_struct *work)
goto out;
}
+ /* defeat 8s death from lowsys on A5 */
+ pcf50633_reg_write(pcf, PCF50633_REG_OOCSHDWN, 0x04);
+
/* We immediately read the usb and adapter status. We thus make sure
* only of USBINS/USBREM IRQ handlers are called */
if (pcf_int[0] & (PCF50633_INT1_USBINS | PCF50633_INT1_USBREM)) {
chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
if (chgstat & (0x3 << 4))
- pcf_int[0] &= ~(1 << PCF50633_INT1_USBREM);
+ pcf_int[0] &= ~PCF50633_INT1_USBREM;
else
- pcf_int[0] &= ~(1 << PCF50633_INT1_USBINS);
+ pcf_int[0] &= ~PCF50633_INT1_USBINS;
}
/* Make sure only one of ADPINS or ADPREM is set */
if (pcf_int[0] & (PCF50633_INT1_ADPINS | PCF50633_INT1_ADPREM)) {
chgstat = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
if (chgstat & (0x3 << 4))
- pcf_int[0] &= ~(1 << PCF50633_INT1_ADPREM);
+ pcf_int[0] &= ~PCF50633_INT1_ADPREM;
else
- pcf_int[0] &= ~(1 << PCF50633_INT1_ADPINS);
+ pcf_int[0] &= ~PCF50633_INT1_ADPINS;
}
dev_dbg(pcf->dev, "INT1=0x%02x INT2=0x%02x INT3=0x%02x "
@@ -453,7 +456,6 @@ static void
pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
struct platform_device **pdev)
{
- struct pcf50633_subdev_pdata *subdev_pdata;
int ret;
*pdev = platform_device_alloc(name, -1);
@@ -462,15 +464,6 @@ pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
return;
}
- subdev_pdata = kmalloc(sizeof(*subdev_pdata), GFP_KERNEL);
- if (!subdev_pdata) {
- dev_err(pcf->dev, "Error allocating subdev pdata\n");
- platform_device_put(*pdev);
- }
-
- subdev_pdata->pcf = pcf;
- platform_device_add_data(*pdev, subdev_pdata, sizeof(*subdev_pdata));
-
(*pdev)->dev.parent = pcf->dev;
ret = platform_device_add(*pdev);
@@ -482,13 +475,13 @@ pcf50633_client_dev_register(struct pcf50633 *pcf, const char *name,
}
#ifdef CONFIG_PM
-static int pcf50633_suspend(struct device *dev, pm_message_t state)
+static int pcf50633_suspend(struct i2c_client *client, pm_message_t state)
{
struct pcf50633 *pcf;
int ret = 0, i;
u8 res[5];
- pcf = dev_get_drvdata(dev);
+ pcf = i2c_get_clientdata(client);
/* Make sure our interrupt handlers are not called
* henceforth */
@@ -523,12 +516,12 @@ out:
return ret;
}
-static int pcf50633_resume(struct device *dev)
+static int pcf50633_resume(struct i2c_client *client)
{
struct pcf50633 *pcf;
int ret;
- pcf = dev_get_drvdata(dev);
+ pcf = i2c_get_clientdata(client);
/* Write the saved mask registers */
ret = pcf50633_write_block(pcf, PCF50633_REG_INT1M,
@@ -560,9 +553,14 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
{
struct pcf50633 *pcf;
struct pcf50633_platform_data *pdata = client->dev.platform_data;
- int i, ret = 0;
+ int i, ret;
int version, variant;
+ if (!client->irq) {
+ dev_err(&client->dev, "Missing IRQ\n");
+ return -ENOENT;
+ }
+
pcf = kzalloc(sizeof(*pcf), GFP_KERNEL);
if (!pcf)
return -ENOMEM;
@@ -577,6 +575,11 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
pcf->irq = client->irq;
pcf->work_queue = create_singlethread_workqueue("pcf50633");
+ if (!pcf->work_queue) {
+ dev_err(&client->dev, "Failed to alloc workqueue\n");
+ goto err_free;
+ }
+
INIT_WORK(&pcf->irq_work, pcf50633_irq_worker);
version = pcf50633_reg_read(pcf, 0);
@@ -584,7 +587,7 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
if (version < 0 || variant < 0) {
dev_err(pcf->dev, "Unable to probe pcf50633\n");
ret = -ENODEV;
- goto err;
+ goto err_destroy_workqueue;
}
dev_info(pcf->dev, "Probed device version %d variant %d\n",
@@ -598,6 +601,15 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
pcf50633_reg_write(pcf, PCF50633_REG_INT4M, 0x00);
pcf50633_reg_write(pcf, PCF50633_REG_INT5M, 0x00);
+ set_irq_handler(client->irq, handle_level_irq);
+ ret = request_irq(client->irq, pcf50633_irq,
+ IRQF_TRIGGER_LOW, "pcf50633", pcf);
+
+ if (ret) {
+ dev_err(pcf->dev, "Failed to request IRQ %d\n", ret);
+ goto err_destroy_workqueue;
+ }
+
/* Create sub devices */
pcf50633_client_dev_register(pcf, "pcf50633-input",
&pcf->input_pdev);
@@ -607,53 +619,46 @@ static int __devinit pcf50633_probe(struct i2c_client *client,
&pcf->mbc_pdev);
pcf50633_client_dev_register(pcf, "pcf50633-adc",
&pcf->adc_pdev);
+ pcf50633_client_dev_register(pcf, "pcf50633-backlight",
+ &pcf->bl_pdev);
+
for (i = 0; i < PCF50633_NUM_REGULATORS; i++) {
struct platform_device *pdev;
pdev = platform_device_alloc("pcf50633-regltr", i);
if (!pdev) {
- dev_err(pcf->dev, "Cannot create regulator\n");
+ dev_err(pcf->dev, "Cannot create regulator %d\n", i);
continue;
}
pdev->dev.parent = pcf->dev;
- pdev->dev.platform_data = &pdata->reg_init_data[i];
- dev_set_drvdata(&pdev->dev, pcf);
+ platform_device_add_data(pdev, &pdata->reg_init_data[i],
+ sizeof(pdata->reg_init_data[i]));
pcf->regulator_pdev[i] = pdev;
platform_device_add(pdev);
}
- if (client->irq) {
- ret = request_irq(client->irq, pcf50633_irq,
- IRQF_TRIGGER_LOW, "pcf50633", pcf);
-
- if (ret) {
- dev_err(pcf->dev, "Failed to request IRQ %d\n", ret);
- goto err;
- }
- } else {
- dev_err(pcf->dev, "No IRQ configured\n");
- goto err;
- }
-
if (enable_irq_wake(client->irq) < 0)
- dev_err(pcf->dev, "IRQ %u cannot be enabled as wake-up source"
+ dev_info(pcf->dev, "IRQ %u cannot be enabled as wake-up source"
"in this hardware revision", client->irq);
ret = sysfs_create_group(&client->dev.kobj, &pcf_attr_group);
if (ret)
- dev_err(pcf->dev, "error creating sysfs entries\n");
+ dev_info(pcf->dev, "Failed to create sysfs entries\n");
if (pdata->probe_done)
pdata->probe_done(pcf);
return 0;
-err:
+err_destroy_workqueue:
destroy_workqueue(pcf->work_queue);
+err_free:
+ i2c_set_clientdata(client, NULL);
kfree(pcf);
+
return ret;
}
@@ -686,12 +691,12 @@ static struct i2c_device_id pcf50633_id_table[] = {
static struct i2c_driver pcf50633_driver = {
.driver = {
.name = "pcf50633",
- .suspend = pcf50633_suspend,
- .resume = pcf50633_resume,
},
.id_table = pcf50633_id_table,
.probe = pcf50633_probe,
.remove = __devexit_p(pcf50633_remove),
+ .suspend = pcf50633_suspend,
+ .resume = pcf50633_resume,
};
static int __init pcf50633_init(void)
diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c
index 11dc7e69c4f..7dc854c3fd8 100644
--- a/drivers/mtd/nand/s3c2410.c
+++ b/drivers/mtd/nand/s3c2410.c
@@ -816,7 +816,7 @@ static void s3c2410_nand_init_chip(struct s3c2410_nand_info *info,
nmtd->mtd.owner = THIS_MODULE;
nmtd->set = set;
- if (hardware_ecc) {
+ if (!(info->platform && info->platform->software_ecc) && hardware_ecc) {
chip->ecc.calculate = s3c2410_nand_calculate_ecc;
chip->ecc.correct = s3c2410_nand_correct_data;
chip->ecc.mode = NAND_ECC_HW;
diff --git a/drivers/power/Kconfig b/drivers/power/Kconfig
index cea6cef27e8..7cd71fcb0cc 100644
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -110,4 +110,22 @@ config CHARGER_PCF50633
help
Say Y to include support for NXP PCF50633 Main Battery Charger.
+config BATTERY_BQ27000_HDQ
+ tristate "BQ27000 HDQ battery monitor driver"
+ help
+ Say Y to enable support for the battery on the Neo Freerunner
+
+config HDQ_GPIO_BITBANG
+ bool "Generic gpio based HDQ bitbang"
+ help
+ Say Y to enable supoort for generic gpio based HDQ bitbang driver.
+ This can not be built as a module.
+
+config BATTERY_PLATFORM
+ tristate "Platform battery driver"
+ help
+ Say Y here to include support for battery driver that gets all
+ information from platform functions.
+
endif # POWER_SUPPLY
+
diff --git a/drivers/power/Makefile b/drivers/power/Makefile
index b96f29d91c2..47f57ffef19 100644
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -29,3 +29,7 @@ obj-$(CONFIG_BATTERY_BQ27x00) += bq27x00_battery.o
obj-$(CONFIG_BATTERY_DA9030) += da9030_battery.o
obj-$(CONFIG_BATTERY_MAX17040) += max17040_battery.o
obj-$(CONFIG_CHARGER_PCF50633) += pcf50633-charger.o
+obj-$(CONFIG_BATTERY_BQ27000_HDQ) += bq27000_battery.o
+
+obj-$(CONFIG_HDQ_GPIO_BITBANG) += hdq.o
+obj-$(CONFIG_BATTERY_PLATFORM) += platform_battery.o
diff --git a/drivers/power/bq27000_battery.c b/drivers/power/bq27000_battery.c
new file mode 100644
index 00000000000..32655dce1f3
--- /dev/null
+++ b/drivers/power/bq27000_battery.c
@@ -0,0 +1,477 @@
+/*
+ * Driver for batteries with bq27000 chips inside via HDQ
+ *
+ * Copyright 2008 Openmoko, Inc
+ * Andy Green <andy@openmoko.com>
+ *
+ * based on ds2760 driver, original copyright notice for that --->
+ *
+ * Copyright © 2007 Anton Vorontsov
+ * 2004-2007 Matt Reimer
+ * 2004 Szabolcs Gyurko
+ *
+ * Use consistent with the GNU GPL is permitted,
+ * provided that this copyright notice is
+ * preserved in its entirety in all copies and derived works.
+ *
+ * Author: Anton Vorontsov <cbou@mail.ru>
+ * February 2007
+ *
+ * Matt Reimer <mreimer@vpop.net>
+ * April 2004, 2005, 2007
+ *
+ * Szabolcs Gyurko <szabolcs.gyurko@tlt.hu>
+ * September 2004
+ */
+
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/jiffies.h>
+#include <linux/delay.h>
+#include <linux/pm.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/bq27000_battery.h>
+
+enum bq27000_regs {
+ /* RAM regs */
+ /* read-write after this */
+ BQ27000_CTRL = 0, /* Device Control Register */
+ BQ27000_MODE, /* Device Mode Register */
+ BQ27000_AR_L, /* At-Rate H L */
+ BQ27000_AR_H,
+ /* read-only after this */
+ BQ27000_ARTTE_L, /* At-Rate Time To Empty H L */
+ BQ27000_ARTTE_H,
+ BQ27000_TEMP_L, /* Reported Temperature H L */
+ BQ27000_TEMP_H,
+ BQ27000_VOLT_L, /* Reported Voltage H L */
+ BQ27000_VOLT_H,
+ BQ27000_FLAGS, /* Status Flags */
+ BQ27000_RSOC, /* Relative State of Charge */
+ BQ27000_NAC_L, /* Nominal Available Capacity H L */
+ BQ27000_NAC_H,
+ BQ27000_CACD_L, /* Discharge Compensated H L */
+ BQ27000_CACD_H,
+ BQ27000_CACT_L, /* Temperature Compensated H L */
+ BQ27000_CACT_H,
+ BQ27000_LMD_L, /* Last measured discharge H L */
+ BQ27000_LMD_H,
+ BQ27000_AI_L, /* Average Current H L */
+ BQ27000_AI_H,
+ BQ27000_TTE_L, /* Time to Empty H L */
+ BQ27000_TTE_H,
+ BQ27000_TTF_L, /* Time to Full H L */
+ BQ27000_TTF_H,
+ BQ27000_SI_L, /* Standby Current H L */
+ BQ27000_SI_H,
+ BQ27000_STTE_L, /* Standby Time To Empty H L */
+ BQ27000_STTE_H,
+ BQ27000_MLI_L, /* Max Load Current H L */
+ BQ27000_MLI_H,
+ BQ27000_MLTTE_L, /* Max Load Time To Empty H L */
+ BQ27000_MLTTE_H,
+ BQ27000_SAE_L, /* Available Energy H L */
+ BQ27000_SAE_H,
+ BQ27000_AP_L, /* Available Power H L */
+ BQ27000_AP_H,
+ BQ27000_TTECP_L, /* Time to Empty at Constant Power H L */
+ BQ27000_TTECP_H,
+ BQ27000_CYCL_L, /* Cycle count since learning cycle H L */
+ BQ27000_CYCL_H,
+ BQ27000_CYCT_L, /* Cycle Count Total H L */
+ BQ27000_CYCT_H,
+ BQ27000_CSOC, /* Compensated State Of Charge */
+ /* EEPROM regs */
+ /* read-write after this */
+ BQ27000_EE_EE_EN = 0x6e, /* EEPROM Program Enable */
+ BQ27000_EE_ILMD = 0x76, /* Initial Last Measured Discharge High Byte */
+ BQ27000_EE_SEDVF, /* Scaled EDVF Threshold */
+ BQ27000_EE_SEDV1, /* Scaled EDV1 Threshold */
+ BQ27000_EE_ISLC, /* Initial Standby Load Current */
+ BQ27000_EE_DMFSD, /* Digital Magnitude Filter and Self Discharge */
+ BQ27000_EE_TAPER, /* Aging Estimate Enable, Charge Termination Taper */
+ BQ27000_EE_PKCFG, /* Pack Configuration Values */
+ BQ27000_EE_IMLC, /* Initial Max Load Current or ID #3 */
+ BQ27000_EE_DCOMP, /* Discharge rate compensation constants or ID #2 */
+ BQ27000_EE_TCOMP, /* Temperature Compensation constants or ID #1 */
+};
+
+enum bq27000_status_flags {
+ BQ27000_STATUS_CHGS = 0x80, /* 1 = being charged */
+ BQ27000_STATUS_NOACT = 0x40, /* 1 = no activity */
+ BQ27000_STATUS_IMIN = 0x20, /* 1 = Lion taper current mode */
+ BQ27000_STATUS_CI = 0x10, /* 1 = capacity likely innacurate */
+ BQ27000_STATUS_CALIP = 0x08, /* 1 = calibration in progress */
+ BQ27000_STATUS_VDQ = 0x04, /* 1 = capacity should be accurate */
+ BQ27000_STATUS_EDV1 = 0x02, /* 1 = end of discharge.. <6% left */
+ BQ27000_STATUS_EDVF = 0x01, /* 1 = no, it's really empty now */
+};
+
+#define NANOVOLTS_UNIT 3750
+
+struct bq27000_bat_regs {
+ int ai;
+ int flags;
+ int lmd;
+ int rsoc;
+ int temp;
+ int tte;
+ int ttf;
+ int volt;
+};
+
+struct bq27000_device_info {
+ struct device *dev;
+ struct power_supply bat;
+ struct power_supply ac;
+ struct power_supply usb;
+ struct delayed_work work;
+ struct bq27000_platform_data *pdata;
+
+ struct bq27000_bat_regs regs;
+};
+
+static unsigned int cache_time = 5000;
+module_param(cache_time, uint, 0644);
+MODULE_PARM_DESC(cache_time, "cache time in milliseconds");
+
+/*
+ * reading 16 bit values over HDQ has a special hazard where the
+ * hdq device firmware can update the 16-bit register during the time we
+ * read the two halves. TI document SLUS556D recommends the algorithm here
+ * to avoid trouble
+ */
+
+static int hdq_read16(struct bq27000_device_info *di, int address)
+{
+ int acc;
+ int high;
+ int retries = 3;
+
+ while (retries--) {
+
+ high = (di->pdata->hdq_read)(address + 1); /* high part */
+
+ if (high < 0)
+ return high;
+ acc = (di->pdata->hdq_read)(address);
+ if (acc < 0)
+ return acc;
+
+ /* confirm high didn't change between reading it and low */
+ if (high == (di->pdata->hdq_read)(address + 1))
+ return (high << 8) | acc;
+ }
+
+ return -ETIME;
+}
+
+static void bq27000_battery_external_power_changed(struct power_supply *psy)
+{
+ struct bq27000_device_info *di = container_of(psy, struct bq27000_device_info, bat);
+
+ dev_dbg(di->dev, "%s\n", __FUNCTION__);
+ schedule_delayed_work(&di->work, 0);
+}
+
+static int bq27000_battery_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ int n;
+ struct bq27000_device_info *di = container_of(psy, struct bq27000_device_info, bat);
+
+ if (di->regs.rsoc < 0 && psp != POWER_SUPPLY_PROP_PRESENT)
+ return -ENODEV;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_STATUS:
+ val->intval = POWER_SUPPLY_STATUS_UNKNOWN;
+
+ if (!di->pdata->get_charger_online_status)
+ goto use_bat;
+ if ((di->pdata->get_charger_online_status)()) {
+ /*
+ * charger is definitively present
+ * we report our state in terms of what it says it
+ * is doing
+ */
+ if (!di->pdata->get_charger_active_status)
+ goto use_bat;
+
+ if ((di->pdata->get_charger_active_status)()) {
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ break;
+ }
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ }
+
+ /*
+ * platform provided definite indication of charger presence,
+ * and it is telling us it isn't there... but we are on so we
+ * must be running from battery --->
+ */
+
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+
+use_bat:
+ /*
+ * either the charger is not connected, or the
+ * platform doesn't give info about charger, use battery state
+ * but... battery state can be out of date by 4 seconds or
+ * so... use the platform callbacks if possible.
+ */
+
+ /* no real activity on the battery */
+ if (di->regs.ai < 2) {
+ if (!di->regs.ttf)
+ val->intval = POWER_SUPPLY_STATUS_FULL;
+ else
+ val->intval = POWER_SUPPLY_STATUS_NOT_CHARGING;
+ break;
+ }
+ /* power is actually going in or out... */
+ if (di->regs.flags < 0)
+ return di->regs.flags;
+ if (di->regs.flags & BQ27000_STATUS_CHGS)
+ val->intval = POWER_SUPPLY_STATUS_CHARGING;
+ else
+ val->intval = POWER_SUPPLY_STATUS_DISCHARGING;
+ break;
+ case POWER_SUPPLY_PROP_HEALTH:
+ val->intval = POWER_SUPPLY_HEALTH_UNKNOWN;
+ /* Do we have accurate readings... */
+ if (di->regs.flags < 0)
+ return di->regs.flags;
+ if (di->regs.flags & BQ27000_STATUS_VDQ)
+ val->intval = POWER_SUPPLY_HEALTH_GOOD;
+ break;
+ case POWER_SUPPLY_PROP_VOLTAGE_NOW:
+ if (di->regs.volt < 0)
+ return di->regs.volt;
+ /* mV -> uV */
+ val->intval = di->regs.volt * 1000;
+ break;
+ case POWER_SUPPLY_PROP_CURRENT_NOW:
+ if (di->regs.flags < 0)
+ return di->regs.flags;
+ if (di->regs.flags & BQ27000_STATUS_CHGS)
+ n = -NANOVOLTS_UNIT;
+ else
+ n = NANOVOLTS_UNIT;
+ if (di->regs.ai < 0)
+ return di->regs.ai;
+ val->intval = (di->regs.ai * n) / di->pdata->rsense_mohms;
+ break;
+ case POWER_SUPPLY_PROP_CHARGE_FULL:
+ if (di->regs.lmd < 0)
+ return di->regs.lmd;
+ val->intval = (di->regs.lmd * 3570) / di->pdata->rsense_mohms;
+ break;
+ case POWER_SUPPLY_PROP_TEMP:
+ if (di->regs.temp < 0)
+ return di->regs.temp;
+ /* K (in 0.25K units) is 273.15 up from C (in 0.1C)*/
+ /* 10926 = 27315 * 4 / 10 */
+ val->intval = (((long)di->regs.temp * 10l) - 10926) / 4;
+ break;
+ case POWER_SUPPLY_PROP_TECHNOLOGY:
+ val->intval = POWER_SUPPLY_TECHNOLOGY_LION;
+ break;
+ case POWER_SUPPLY_PROP_CAPACITY:
+ val->intval = di->regs.rsoc;
+ if (val->intval < 0)
+ return val->intval;
+ break;
+ case POWER_SUPPLY_PROP_PRESENT:
+ val->intval = !(di->regs.rsoc < 0);
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW:
+ if (di->regs.tte < 0)
+ return di->regs.tte;
+ val->intval = 60 * di->regs.tte;
+ break;
+ case POWER_SUPPLY_PROP_TIME_TO_FULL_NOW:
+ if (di->regs.ttf < 0)
+ return di->regs.ttf;
+ val->intval = 60 * di->regs.ttf;
+ break;
+ case POWER_SUPPLY_PROP_ONLINE:
+ if (di->pdata->get_charger_online_status)
+ val->intval = (di->pdata->get_charger_online_status)();
+ else
+ return -EINVAL;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+static void bq27000_battery_work(struct work_struct *work)
+{
+ struct bq27000_device_info *di =
+ container_of(work, struct bq27000_device_info, work.work);
+
+ if ((di->pdata->hdq_initialized)()) {
+ struct bq27000_bat_regs regs;
+
+ regs.ai = hdq_read16(di, BQ27000_AI_L);
+ regs.flags = (di->pdata->hdq_read)(BQ27000_FLAGS);
+ regs.lmd = hdq_read16(di, BQ27000_LMD_L);
+ regs.rsoc = (di->pdata->hdq_read)(BQ27000_RSOC);
+ regs.temp = hdq_read16(di, BQ27000_TEMP_L);
+ regs.tte = hdq_read16(di, BQ27000_TTE_L);
+ regs.ttf = hdq_read16(di, BQ27000_TTF_L);
+ regs.volt = hdq_read16(di, BQ27000_VOLT_L);
+
+ if (memcmp (&regs, &di->regs, sizeof(regs)) != 0) {
+ di->regs = regs;
+ power_supply_changed(&di->bat);
+ }
+ }
+
+ if (!schedule_delayed_work(&di->work, cache_time))
+ dev_err(di->dev, "battery service reschedule failed\n");
+}
+
+static enum power_supply_property bq27000_battery_props[] = {
+ POWER_SUPPLY_PROP_STATUS,
+ POWER_SUPPLY_PROP_HEALTH,
+ POWER_SUPPLY_PROP_VOLTAGE_NOW,
+ POWER_SUPPLY_PROP_CURRENT_NOW,
+ POWER_SUPPLY_PROP_CHARGE_FULL,
+ POWER_SUPPLY_PROP_TEMP,
+ POWER_SUPPLY_PROP_TECHNOLOGY,
+ POWER_SUPPLY_PROP_PRESENT,
+ POWER_SUPPLY_PROP_TIME_TO_EMPTY_NOW,
+ POWER_SUPPLY_PROP_TIME_TO_FULL_NOW,
+ POWER_SUPPLY_PROP_CAPACITY,
+ POWER_SUPPLY_PROP_ONLINE
+};
+
+static int bq27000_battery_probe(struct platform_device *pdev)
+{
+ int retval = 0;
+ struct bq27000_device_info *di;
+ struct bq27000_platform_data *pdata;
+
+ dev_info(&pdev->dev, "BQ27000 Battery Driver (C) 2008 Openmoko, Inc\n");
+
+ di = kzalloc(sizeof(*di), GFP_KERNEL);
+ if (!di) {
+ retval = -ENOMEM;
+ goto di_alloc_failed;
+ }
+
+ platform_set_drvdata(pdev, di);
+
+ pdata = pdev->dev.platform_data;
+ di->dev = &pdev->dev;
+ /* di->w1_dev = pdev->dev.parent; */
+ di->bat.name = pdata->name;
+ di->bat.type = POWER_SUPPLY_TYPE_BATTERY;
+ di->bat.properties = bq27000_battery_props;
+ di->bat.num_properties = ARRAY_SIZE(bq27000_battery_props);
+ di->bat.get_property = bq27000_battery_get_property;
+ di->bat.external_power_changed =
+ bq27000_battery_external_power_changed;
+ di->bat.use_for_apm = 1;
+ di->pdata = pdata;
+
+ retval = power_supply_register(&pdev->dev, &di->bat);
+ if (retval) {
+ dev_err(di->dev, "failed to register battery\n");
+ goto batt_failed;
+ }
+
+ INIT_DELAYED_WORK(&di->work, bq27000_battery_work);
+
+ if (!schedule_delayed_work(&di->work, 0))
+ dev_err(di->dev, "failed to schedule bq27000_battery_work\n");
+
+ return 0;
+
+batt_failed:
+ kfree(di);
+di_alloc_failed:
+ return retval;
+}
+
+static int bq27000_battery_remove(struct platform_device *pdev)
+{
+ struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+ cancel_delayed_work(&di->work);
+
+ power_supply_unregister(&di->bat);
+
+ return 0;
+}
+
+void bq27000_charging_state_change(struct platform_device *pdev)
+{
+ struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+ if (!di)
+ return;
+}
+EXPORT_SYMBOL_GPL(bq27000_charging_state_change);
+
+#ifdef CONFIG_PM
+
+static int bq27000_battery_suspend(struct platform_device *pdev,
+ pm_message_t state)
+{
+ struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+ cancel_delayed_work(&di->work);
+ return 0;
+}
+
+static int bq27000_battery_resume(struct platform_device *pdev)
+{
+ struct bq27000_device_info *di = platform_get_drvdata(pdev);
+
+ schedule_delayed_work(&di->work, 0);
+ return 0;
+}
+
+#else
+
+#define bq27000_battery_suspend NULL
+#define bq27000_battery_resume NULL
+
+#endif /* CONFIG_PM */
+
+static struct platform_driver bq27000_battery_driver = {
+ .driver = {
+ .name = "bq27000-battery",
+ },
+ .probe = bq27000_battery_probe,
+ .remove = bq27000_battery_remove,
+ .suspend = bq27000_battery_suspend,
+ .resume = bq27000_battery_resume,
+};
+
+static int __init bq27000_battery_init(void)
+{
+ return platform_driver_register(&bq27000_battery_driver);
+}
+
+static void __exit bq27000_battery_exit(void)
+{
+ platform_driver_unregister(&bq27000_battery_driver);
+}
+
+module_init(bq27000_battery_init);
+module_exit(bq27000_battery_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("bq27000 battery driver");
diff --git a/drivers/power/hdq.c b/drivers/power/hdq.c
new file mode 100644
index 00000000000..f03fabfb1aa
--- /dev/null
+++ b/drivers/power/hdq.c
@@ -0,0 +1,515 @@
+/*
+ * HDQ generic GPIO bitbang driver using FIQ
+ *
+ * (C) 2006-2007 by Openmoko, Inc.
+ * Author: Andy Green <andy@openmoko.com>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/delay.h>
+#include <linux/platform_device.h>
+#include <linux/hdq.h>
+
+#define HDQ_READ 0
+#define HDQ_WRITE 0x80
+
+enum hdq_bitbang_states {
+ HDQB_IDLE = 0,
+ HDQB_TX_BREAK,
+ HDQB_TX_BREAK_RECOVERY,
+ HDQB_ADS_CALC,
+ HDQB_ADS_LOW,
+ HDQB_ADS_HIGH,
+ HDQB_WAIT_RX,
+ HDQB_DATA_RX_LOW,
+ HDQB_DATA_RX_HIGH,
+ HDQB_WAIT_TX,
+};
+
+static struct hdq_priv {
+ u8 hdq_probed; /* nonzero after HDQ driver probed */
+ struct mutex hdq_lock; /* if you want to use hdq, you have to take lock */
+ unsigned long hdq_gpio_pin; /* GTA02 = GPD14 which pin to meddle with */
+ u8 hdq_ads; /* b7..b6 = register address, b0 = r/w */
+ u8 hdq_tx_data; /* data to tx for write action */
+ u8 hdq_rx_data; /* data received in read action */
+ u8 hdq_request_ctr; /* incremented by "user" to request a transfer */
+ u8 hdq_transaction_ctr; /* incremented after each transfer */
+ u8 hdq_error; /* 0 = no error */
+ u8 hdq_ctr;
+ u8 hdq_ctr2;
+ u8 hdq_bit;
+ u8 hdq_shifter;
+ u8 hdq_tx_data_done;
+ enum hdq_bitbang_states hdq_state;
+ int reported_error;
+
+ struct hdq_platform_data *pdata;
+} hdq_priv;
+
+
+static void hdq_bad(void)
+{
+ if (!hdq_priv.reported_error)
+ printk(KERN_ERR "HDQ error: %d\n", hdq_priv.hdq_error);
+ hdq_priv.reported_error = 1;
+}
+
+static void hdq_good(void)
+{
+ if (hdq_priv.reported_error)
+ printk(KERN_INFO "HDQ responds again\n");
+ hdq_priv.reported_error = 0;
+}
+
+int hdq_fiq_handler(void)
+{
+ if (!hdq_priv.hdq_probed)
+ return 0;
+
+ switch (hdq_priv.hdq_state) {
+ case HDQB_IDLE:
+ if (hdq_priv.hdq_request_ctr == hdq_priv.hdq_transaction_ctr)
+ break;
+ hdq_priv.hdq_ctr = 250 / HDQ_SAMPLE_PERIOD_US;
+ hdq_priv.pdata->gpio_set(0);
+ hdq_priv.pdata->gpio_dir_out();
+ hdq_priv.hdq_tx_data_done = 0;
+ hdq_priv.hdq_state = HDQB_TX_BREAK;
+ break;
+
+ case HDQB_TX_BREAK: /* issue low for > 190us */
+ if (--hdq_priv.hdq_ctr == 0) {
+ hdq_priv.hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US;
+ hdq_priv.hdq_state = HDQB_TX_BREAK_RECOVERY;
+ hdq_priv.pdata->gpio_set(1);
+ }
+ break;
+
+ case HDQB_TX_BREAK_RECOVERY: /* issue low for > 40us */
+ if (--hdq_priv.hdq_ctr)
+ break;
+ hdq_priv.hdq_shifter = hdq_priv.hdq_ads;
+ hdq_priv.hdq_bit = 8; /* 8 bits of ads / rw */
+ hdq_priv.hdq_tx_data_done = 0; /* doing ads */
+ /* fallthru on last one */
+ case HDQB_ADS_CALC:
+ if (hdq_priv.hdq_shifter & 1)
+ hdq_priv.hdq_ctr = 50 / HDQ_SAMPLE_PERIOD_US;
+ else
+ hdq_priv.hdq_ctr = 120 / HDQ_SAMPLE_PERIOD_US;
+ /* carefully precompute the other phase length */
+ hdq_priv.hdq_ctr2 = (210 - (hdq_priv.hdq_ctr * HDQ_SAMPLE_PERIOD_US)) /
+ HDQ_SAMPLE_PERIOD_US;
+ hdq_priv.hdq_state = HDQB_ADS_LOW;
+ hdq_priv.hdq_shifter >>= 1;
+ hdq_priv.hdq_bit--;
+ hdq_priv.pdata->gpio_set(0);
+ break;
+
+ case HDQB_ADS_LOW:
+ if (--hdq_priv.hdq_ctr)
+ break;
+ hdq_priv.pdata->gpio_set(1);
+ hdq_priv.hdq_state = HDQB_ADS_HIGH;
+ break;
+
+ case HDQB_ADS_HIGH:
+ if (--hdq_priv.hdq_ctr2 > 1) /* account for HDQB_ADS_CALC */
+ break;
+ if (hdq_priv.hdq_bit) { /* more bits to do */
+ hdq_priv.hdq_state = HDQB_ADS_CALC;
+ break;
+ }
+ /* no more bits, wait it out until hdq_priv.hdq_ctr2 exhausted */
+ if (hdq_priv.hdq_ctr2)
+ break;
+ /* ok no more bits and very last state */
+ hdq_priv.hdq_ctr = 60 / HDQ_SAMPLE_PERIOD_US;
+ /* FIXME 0 = read */
+ if (hdq_priv.hdq_ads & 0x80) { /* write the byte out */
+ /* set delay before payload */
+ hdq_priv.hdq_ctr = 300 / HDQ_SAMPLE_PERIOD_US;
+ /* already high, no need to write */
+ hdq_priv.hdq_state = HDQB_WAIT_TX;
+ break;
+ }
+ /* read the next byte */
+ hdq_priv.hdq_bit = 8; /* 8 bits of data */
+ hdq_priv.hdq_ctr = 2500 / HDQ_SAMPLE_PERIOD_US;
+ hdq_priv.hdq_state = HDQB_WAIT_RX;
+ hdq_priv.pdata->gpio_dir_in();
+ break;
+
+ case HDQB_WAIT_TX: /* issue low for > 40us */
+ if (--hdq_priv.hdq_ctr)
+ break;
+ if (!hdq_priv.hdq_tx_data_done) { /* was that the data sent? */
+ hdq_priv.hdq_tx_data_done++;
+ hdq_priv.hdq_shifter = hdq_priv.hdq_tx_data;
+ hdq_priv.hdq_bit = 8; /* 8 bits of data */
+ hdq_priv.hdq_state = HDQB_ADS_CALC; /* start sending */
+ break;
+ }
+ hdq_priv.hdq_error = 0;
+ hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
+ hdq_priv.hdq_state = HDQB_IDLE; /* all tx is done */
+ /* idle in input mode, it's pulled up by 10K */
+ hdq_priv.pdata->gpio_dir_in();
+ break;
+
+ case HDQB_WAIT_RX: /* wait for battery to talk to us */
+ if (hdq_priv.pdata->gpio_get() == 0) {
+ /* it talks to us! */
+ hdq_priv.hdq_ctr2 = 1;
+ hdq_priv.hdq_bit = 8; /* 8 bits of data */
+ /* timeout */
+ hdq_priv.hdq_ctr = 500 / HDQ_SAMPLE_PERIOD_US;
+ hdq_priv.hdq_state = HDQB_DATA_RX_LOW;
+ break;
+ }
+ if (--hdq_priv.hdq_ctr == 0) { /* timed out, error */
+ hdq_priv.hdq_error = 1;
+ hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
+ hdq_priv.hdq_state = HDQB_IDLE; /* abort */
+ }
+ break;
+
+ /*
+ * HDQ basically works by measuring the low time of the bit cell
+ * 32-50us --> '1', 80 - 145us --> '0'
+ */
+
+ case HDQB_DATA_RX_LOW:
+ if (hdq_priv.pdata->gpio_get()) {
+ hdq_priv.hdq_rx_data >>= 1;
+ if (hdq_priv.hdq_ctr2 <= (65 / HDQ_SAMPLE_PERIOD_US))
+ hdq_priv.hdq_rx_data |= 0x80;
+
+ if (--hdq_priv.hdq_bit == 0) {
+ hdq_priv.hdq_error = 0;
+ hdq_priv.hdq_transaction_ctr =
+ hdq_priv.hdq_request_ctr;
+
+ hdq_priv.hdq_state = HDQB_IDLE;
+ } else
+ hdq_priv.hdq_state = HDQB_DATA_RX_HIGH;
+ /* timeout */
+ hdq_priv.hdq_ctr = 1000 / HDQ_SAMPLE_PERIOD_US;
+ hdq_priv.hdq_ctr2 = 1;
+ break;
+ }
+ hdq_priv.hdq_ctr2++;
+ if (--hdq_priv.hdq_ctr)
+ break;
+ /* timed out, error */
+ hdq_priv.hdq_error = 2;
+ hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
+ hdq_priv.hdq_state = HDQB_IDLE; /* abort */
+ break;
+
+ case HDQB_DATA_RX_HIGH:
+ if (!hdq_priv.pdata->gpio_get()) {
+ /* it talks to us! */
+ hdq_priv.hdq_ctr2 = 1;
+ /* timeout */
+ hdq_priv.hdq_ctr = 400 / HDQ_SAMPLE_PERIOD_US;
+ hdq_priv.hdq_state = HDQB_DATA_RX_LOW;
+ break;
+ }
+ if (--hdq_priv.hdq_ctr)
+ break;
+ /* timed out, error */
+ hdq_priv.hdq_error = 3;
+ hdq_priv.hdq_transaction_ctr = hdq_priv.hdq_request_ctr;
+
+ /* we're in input mode already */
+ hdq_priv.hdq_state = HDQB_IDLE; /* abort */
+ break;
+ }
+
+ /* Are we interested in keeping the FIQ source alive ? */
+ if (hdq_priv.hdq_state != HDQB_IDLE)
+ return 1;
+ else
+ return 0;
+}
+static int fiq_busy(void)
+{
+ int request = (volatile u8)hdq_priv.hdq_request_ctr;
+ int transact = (volatile u8)hdq_priv.hdq_transaction_ctr;
+
+
+ return (request != transact);
+}
+
+int hdq_initialized(void)
+{
+ return hdq_priv.hdq_probed;
+}
+EXPORT_SYMBOL_GPL(hdq_initialized);
+
+int hdq_read(int address)
+{
+ int count_sleeps = 5;
+ int ret = -ETIME;
+
+ if (!hdq_priv.hdq_probed)
+ return -EINVAL;
+
+ mutex_lock(&hdq_priv.hdq_lock);
+
+ hdq_priv.hdq_error = 0;
+ hdq_priv.hdq_ads = address | HDQ_READ;
+ hdq_priv.hdq_request_ctr++;
+ hdq_priv.pdata->kick_fiq();
+ /*
+ * FIQ takes care of it while we block our calling process
+ * But we're not spinning -- other processes run normally while
+ * we wait for the result
+ */
+ while (count_sleeps--) {
+ msleep(10); /* valid transaction always completes in < 10ms */
+
+ if (fiq_busy())
+ continue;
+
+ if (hdq_priv.hdq_error) {
+ hdq_bad();
+ goto done; /* didn't see a response in good time */
+ }
+ hdq_good();
+
+ ret = hdq_priv.hdq_rx_data;
+ goto done;
+ }
+
+done:
+ mutex_unlock(&hdq_priv.hdq_lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(hdq_read);
+
+int hdq_write(int address, u8 data)
+{
+ int count_sleeps = 5;
+ int ret = -ETIME;
+
+ if (!hdq_priv.hdq_probed)
+ return -EINVAL;
+
+ mutex_lock(&hdq_priv.hdq_lock);
+
+ hdq_priv.hdq_error = 0;
+ hdq_priv.hdq_ads = address | HDQ_WRITE;
+ hdq_priv.hdq_tx_data = data;
+ hdq_priv.hdq_request_ctr++;
+ hdq_priv.pdata->kick_fiq();
+ /*
+ * FIQ takes care of it while we block our calling process
+ * But we're not spinning -- other processes run normally while
+ * we wait for the result
+ */
+ while (count_sleeps--) {
+ msleep(10); /* valid transaction always completes in < 10ms */
+
+ if (fiq_busy())
+ continue; /* something bad with FIQ */
+
+ if (hdq_priv.hdq_error) {
+ hdq_bad();
+ goto done; /* didn't see a response in good time */
+ }
+ hdq_good();
+
+ ret = 0;
+ goto done;
+ }
+
+done:
+ mutex_unlock(&hdq_priv.hdq_lock);
+ return ret;
+}
+EXPORT_SYMBOL_GPL(hdq_write);
+
+/* sysfs */
+
+static ssize_t hdq_sysfs_dump(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ int n;
+ int v;
+ u8 u8a[128]; /* whole address space for HDQ */
+ char *end = buf;
+
+ if (!hdq_priv.hdq_probed)
+ return -EINVAL;
+
+ /* the dump does not take care about 16 bit regs, because at this
+ * bus level we don't know about the chip details
+ */
+ for (n = 0; n < sizeof(u8a); n++) {
+ v = hdq_read(n);
+ if (v < 0)
+ goto bail;
+ u8a[n] = v;
+ }
+
+ for (n = 0; n < sizeof(u8a); n += 16) {
+ hex_dump_to_buffer(u8a + n, sizeof(u8a), 16, 1, end, 4096, 0);
+ end += strlen(end);
+ *end++ = '\n';
+ *end = '\0';
+ }
+ return (end - buf);
+
+bail:
+ return sprintf(buf, "ERROR %d\n", v);
+}
+
+/* you write by <address> <data>, eg, "34 128" */
+
+#define atoi(str) simple_strtoul(((str != NULL) ? str : ""), NULL, 0)
+
+static ssize_t hdq_sysfs_write(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ const char *end = buf + count;
+ int address = atoi(buf);
+
+ if (!hdq_priv.hdq_probed)
+ return -EINVAL;
+
+ while ((buf != end) && (*buf != ' '))
+ buf++;
+ if (buf >= end)
+ return 0;
+ while ((buf < end) && (*buf == ' '))
+ buf++;
+ if (buf >= end)
+ return 0;
+
+ hdq_write(address, atoi(buf));
+
+ return count;
+}
+
+static DEVICE_ATTR(dump, 0400, hdq_sysfs_dump, NULL);
+static DEVICE_ATTR(write, 0600, NULL, hdq_sysfs_write);
+
+static struct attribute *hdq_sysfs_entries[] = {
+ &dev_attr_dump.attr,
+ &dev_attr_write.attr,
+ NULL
+};
+
+static struct attribute_group hdq_attr_group = {
+ .name = "hdq",
+ .attrs = hdq_sysfs_entries,
+};
+
+
+#ifdef CONFIG_PM
+static int hdq_suspend(struct platform_device *pdev, pm_message_t state)
+{
+ /* after 18s of this, the battery monitor will also go to sleep */
+ hdq_priv.pdata->gpio_dir_in();
+ hdq_priv.pdata->disable_fiq();
+ return 0;
+}
+
+static int hdq_resume(struct platform_device *pdev)
+{
+ hdq_priv.pdata->gpio_set(1);
+ hdq_priv.pdata->gpio_dir_out();
+ hdq_priv.pdata->enable_fiq();
+ return 0;
+}
+#endif
+
+static int __init hdq_probe(struct platform_device *pdev)
+{
+ struct resource *r = platform_get_resource(pdev, 0, 0);
+ int ret;
+ struct hdq_platform_data *pdata = pdev->dev.platform_data;
+
+ if (!r || !pdata)
+ return -EINVAL;
+
+ platform_set_drvdata(pdev, NULL);
+
+ mutex_init(&hdq_priv.hdq_lock);
+
+ /* set our HDQ comms pin from the platform data */
+ hdq_priv.hdq_gpio_pin = r->start;
+ hdq_priv.pdata = pdata;
+
+ hdq_priv.pdata->gpio_set(1);
+ hdq_priv.pdata->gpio_dir_out();
+
+ /* Initialize FIQ */
+ if (hdq_priv.pdata->enable_fiq() < 0) {
+ dev_err(&pdev->dev, "Could not enable FIQ source\n");
+ return -EINVAL;
+ }
+
+ ret = sysfs_create_group(&pdev->dev.kobj, &hdq_attr_group);
+ if (ret)
+ return ret;
+
+ hdq_priv.hdq_probed = 1; /* we are ready to do stuff now */
+
+ /*
+ * if wanted, users can defer registration of devices
+ * that depend on HDQ until after we register, and can use our
+ * device as parent so suspend-resume ordering is correct
+ */
+ if (pdata->attach_child_devices)
+ (pdata->attach_child_devices)(&pdev->dev);
+
+ hdq_priv.pdata = pdata;
+
+ return 0;
+}
+
+static int hdq_remove(struct platform_device *pdev)
+{
+ sysfs_remove_group(&pdev->dev.kobj, &hdq_attr_group);
+ return 0;
+}
+
+static struct platform_driver hdq_driver = {
+ .probe = hdq_probe,
+ .remove = hdq_remove,
+#ifdef CONFIG_PM
+ .suspend = hdq_suspend,
+ .resume = hdq_resume,
+#endif
+ .driver = {
+ .name = "hdq",
+ },
+};
+
+static int __init hdq_init(void)
+{
+ return platform_driver_register(&hdq_driver);
+}
+
+static void __exit hdq_exit(void)
+{
+ platform_driver_unregister(&hdq_driver);
+}
+
+module_init(hdq_init);
+module_exit(hdq_exit);
+
+MODULE_AUTHOR("Andy Green <andy@openmoko.com>");
+MODULE_DESCRIPTION("HDQ driver");
diff --git a/drivers/power/pcf50633-charger.c b/drivers/power/pcf50633-charger.c
index e8b278f7178..8424c40672a 100644
--- a/drivers/power/pcf50633-charger.c
+++ b/drivers/power/pcf50633-charger.c
@@ -29,15 +29,12 @@
struct pcf50633_mbc {
struct pcf50633 *pcf;
- int adapter_active;
int adapter_online;
- int usb_active;
int usb_online;
struct power_supply usb;
struct power_supply adapter;
-
- struct delayed_work charging_restart_work;
+ struct power_supply ac;
};
int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
@@ -47,16 +44,21 @@ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
u8 bits;
int charging_start = 1;
u8 mbcs2, chgmod;
+ unsigned int mbcc5;
- if (ma >= 1000)
+ if (ma >= 1000) {
bits = PCF50633_MBCC7_USB_1000mA;
- else if (ma >= 500)
+ ma = 1000;
+ } else if (ma >= 500) {
bits = PCF50633_MBCC7_USB_500mA;
- else if (ma >= 100)
+ ma = 500;
+ } else if (ma >= 100) {
bits = PCF50633_MBCC7_USB_100mA;
- else {
+ ma = 100;
+ } else {
bits = PCF50633_MBCC7_USB_SUSPEND;
charging_start = 0;
+ ma = 0;
}
ret = pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC7,
@@ -66,21 +68,40 @@ int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma)
else
dev_info(pcf->dev, "usb curlim to %d mA\n", ma);
- /* Manual charging start */
- mbcs2 = pcf50633_reg_read(pcf, PCF50633_REG_MBCS2);
+ /*
+ * We limit the charging current to be the USB current limit.
+ * The reason is that on pcf50633, when it enters PMU Standby mode,
+ * which it does when the device goes "off", the USB current limit
+ * reverts to the variant default. In at least one common case, that
+ * default is 500mA. By setting the charging current to be the same
+ * as the USB limit we set here before PMU standby, we enforce it only
+ * using the correct amount of current even when the USB current limit
+ * gets reset to the wrong thing
+ */
+
+ if (mbc->pcf->pdata->chg_ref_current_ma) {
+ mbcc5 = (ma << 8) / mbc->pcf->pdata->chg_ref_current_ma;
+ if (mbcc5 > 255)
+ mbcc5 = 255;
+ pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
+ }
+
+ mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2);
chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
/* If chgmod == BATFULL, setting chgena has no effect.
- * We need to set resume instead.
+ * Datasheet says we need to set resume instead but when autoresume is
+ * used resume doesn't work. Clear and set chgena instead.
*/
if (chgmod != PCF50633_MBCS2_MBC_BAT_FULL)
pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA);
- else
+ else {
+ pcf50633_reg_clear_bits(pcf, PCF50633_REG_MBCC1,
+ PCF50633_MBCC1_CHGENA);
pcf50633_reg_set_bit_mask(pcf, PCF50633_REG_MBCC1,
- PCF50633_MBCC1_RESUME, PCF50633_MBCC1_RESUME);
-
- mbc->usb_active = charging_start;
+ PCF50633_MBCC1_CHGENA, PCF50633_MBCC1_CHGENA);
+ }
power_supply_changed(&mbc->usb);
@@ -92,20 +113,44 @@ int pcf50633_mbc_get_status(struct pcf50633 *pcf)
{
struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev);
int status = 0;
+ u8 chgmod;
+
+ if (!mbc)
+ return 0;
+
+ chgmod = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2)
+ & PCF50633_MBCS2_MBC_MASK;
if (mbc->usb_online)
status |= PCF50633_MBC_USB_ONLINE;
- if (mbc->usb_active)
+ if (chgmod == PCF50633_MBCS2_MBC_USB_PRE ||
+ chgmod == PCF50633_MBCS2_MBC_USB_PRE_WAIT ||
+ chgmod == PCF50633_MBCS2_MBC_USB_FAST ||
+ chgmod == PCF50633_MBCS2_MBC_USB_FAST_WAIT)
status |= PCF50633_MBC_USB_ACTIVE;
if (mbc->adapter_online)
status |= PCF50633_MBC_ADAPTER_ONLINE;
- if (mbc->adapter_active)
+ if (chgmod == PCF50633_MBCS2_MBC_ADP_PRE ||
+ chgmod == PCF50633_MBCS2_MBC_ADP_PRE_WAIT ||
+ chgmod == PCF50633_MBCS2_MBC_ADP_FAST ||
+ chgmod == PCF50633_MBCS2_MBC_ADP_FAST_WAIT)
status |= PCF50633_MBC_ADAPTER_ACTIVE;
return status;
}
EXPORT_SYMBOL_GPL(pcf50633_mbc_get_status);
+int pcf50633_mbc_get_usb_online_status(struct pcf50633 *pcf)
+{
+ struct pcf50633_mbc *mbc = platform_get_drvdata(pcf->mbc_pdev);
+
+ if (!mbc)
+ return 0;
+
+ return mbc->usb_online;
+}
+EXPORT_SYMBOL_GPL(pcf50633_mbc_get_usb_online_status);
+
static ssize_t
show_chgmode(struct device *dev, struct device_attribute *attr, char *buf)
{
@@ -156,9 +201,50 @@ static ssize_t set_usblim(struct device *dev,
static DEVICE_ATTR(usb_curlim, S_IRUGO | S_IWUSR, show_usblim, set_usblim);
+static ssize_t
+show_chglim(struct device *dev, struct device_attribute *attr, char *buf)
+{
+ struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
+ u8 mbcc5 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC5);
+ unsigned int ma;
+
+ if (!mbc->pcf->pdata->chg_ref_current_ma)
+ return -ENODEV;
+
+ ma = (mbc->pcf->pdata->chg_ref_current_ma * mbcc5) >> 8;
+
+ return sprintf(buf, "%u\n", ma);
+}
+
+static ssize_t set_chglim(struct device *dev,
+ struct device_attribute *attr, const char *buf, size_t count)
+{
+ struct pcf50633_mbc *mbc = dev_get_drvdata(dev);
+ unsigned long ma;
+ unsigned int mbcc5;
+ int ret;
+
+ if (!mbc->pcf->pdata->chg_ref_current_ma)
+ return -ENODEV;
+
+ ret = strict_strtoul(buf, 10, &ma);
+ if (ret)
+ return -EINVAL;
+
+ mbcc5 = (ma << 8) / mbc->pcf->pdata->chg_ref_current_ma;
+ if (mbcc5 > 255)
+ mbcc5 = 255;
+ pcf50633_reg_write(mbc->pcf, PCF50633_REG_MBCC5, mbcc5);
+
+ return count;
+}
+
+static DEVICE_ATTR(chg_curlim, S_IRUGO | S_IWUSR, show_chglim, set_chglim);
+
static struct attribute *pcf50633_mbc_sysfs_entries[] = {
&dev_attr_chgmode.attr,
&dev_attr_usb_curlim.attr,
+ &dev_attr_chg_curlim.attr,
NULL,
};
@@ -167,76 +253,26 @@ static struct attribute_group mbc_attr_group = {
.attrs = pcf50633_mbc_sysfs_entries,
};
-/* MBC state machine switches into charging mode when the battery voltage
- * falls below 96% of a battery float voltage. But the voltage drop in Li-ion
- * batteries is marginal(1~2 %) till about 80% of its capacity - which means,
- * after a BATFULL, charging won't be restarted until 80%.
- *
- * This work_struct function restarts charging at regular intervals to make
- * sure we don't discharge too much
- */
-
-static void pcf50633_mbc_charging_restart(struct work_struct *work)
-{
- struct pcf50633_mbc *mbc;
- u8 mbcs2, chgmod;
-
- mbc = container_of(work, struct pcf50633_mbc,
- charging_restart_work.work);
-
- mbcs2 = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCS2);
- chgmod = (mbcs2 & PCF50633_MBCS2_MBC_MASK);
-
- if (chgmod != PCF50633_MBCS2_MBC_BAT_FULL)
- return;
-
- /* Restart charging */
- pcf50633_reg_set_bit_mask(mbc->pcf, PCF50633_REG_MBCC1,
- PCF50633_MBCC1_RESUME, PCF50633_MBCC1_RESUME);
- mbc->usb_active = 1;
- power_supply_changed(&mbc->usb);
-
- dev_info(mbc->pcf->dev, "Charging restarted\n");
-}
-
static void
pcf50633_mbc_irq_handler(int irq, void *data)
{
struct pcf50633_mbc *mbc = data;
- int chg_restart_interval =
- mbc->pcf->pdata->charging_restart_interval;
/* USB */
if (irq == PCF50633_IRQ_USBINS) {
mbc->usb_online = 1;
} else if (irq == PCF50633_IRQ_USBREM) {
mbc->usb_online = 0;
- mbc->usb_active = 0;
pcf50633_mbc_usb_curlim_set(mbc->pcf, 0);
- cancel_delayed_work_sync(&mbc->charging_restart_work);
}
/* Adapter */
- if (irq == PCF50633_IRQ_ADPINS) {
+ if (irq == PCF50633_IRQ_ADPINS)
mbc->adapter_online = 1;
- mbc->adapter_active = 1;
- } else if (irq == PCF50633_IRQ_ADPREM) {
+ else if (irq == PCF50633_IRQ_ADPREM)
mbc->adapter_online = 0;
- mbc->adapter_active = 0;
- }
-
- if (irq == PCF50633_IRQ_BATFULL) {
- mbc->usb_active = 0;
- mbc->adapter_active = 0;
-
- if (chg_restart_interval > 0)
- schedule_delayed_work(&mbc->charging_restart_work,
- chg_restart_interval);
- } else if (irq == PCF50633_IRQ_USBLIMON)
- mbc->usb_active = 0;
- else if (irq == PCF50633_IRQ_USBLIMOFF)
- mbc->usb_active = 1;
+ power_supply_changed(&mbc->ac);
power_supply_changed(&mbc->usb);
power_supply_changed(&mbc->adapter);
@@ -269,10 +305,34 @@ static int usb_get_property(struct power_supply *psy,
{
struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, usb);
int ret = 0;
+ u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
+ PCF50633_MBCC7_USB_MASK;
switch (psp) {
case POWER_SUPPLY_PROP_ONLINE:
- val->intval = mbc->usb_online;
+ val->intval = mbc->usb_online &&
+ (usblim <= PCF50633_MBCC7_USB_500mA);
+ break;
+ default:
+ ret = -EINVAL;
+ break;
+ }
+ return ret;
+}
+
+static int ac_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct pcf50633_mbc *mbc = container_of(psy, struct pcf50633_mbc, ac);
+ int ret = 0;
+ u8 usblim = pcf50633_reg_read(mbc->pcf, PCF50633_REG_MBCC7) &
+ PCF50633_MBCC7_USB_MASK;
+
+ switch (psp) {
+ case POWER_SUPPLY_PROP_ONLINE:
+ val->intval = mbc->usb_online &&
+ (usblim == PCF50633_MBCC7_USB_1000mA);
break;
default:
ret = -EINVAL;
@@ -303,7 +363,6 @@ static const u8 mbc_irq_handlers[] = {
static int __devinit pcf50633_mbc_probe(struct platform_device *pdev)
{
struct pcf50633_mbc *mbc;
- struct pcf50633_subdev_pdata *pdata = pdev->dev.platform_data;
int ret;
int i;
u8 mbcs1;
@@ -313,7 +372,7 @@ static int __devinit pcf50633_mbc_probe(struct platform_device *pdev)
return -ENOMEM;
platform_set_drvdata(pdev, mbc);
- mbc->pcf = pdata->pcf;
+ mbc->pcf = dev_to_pcf50633(pdev->dev.parent);
/* Set up IRQ handlers */
for (i = 0; i < ARRAY_SIZE(mbc_irq_handlers); i++)
@@ -337,6 +396,14 @@ static int __devinit pcf50633_mbc_probe(struct platform_device *pdev)
mbc->usb.supplied_to = mbc->pcf->pdata->batteries;
mbc->usb.num_supplicants = mbc->pcf->pdata->num_batteries;
+ mbc->ac.name = "ac";
+ mbc->ac.type = POWER_SUPPLY_TYPE_MAINS;
+ mbc->ac.properties = power_props;
+ mbc->ac.num_properties = ARRAY_SIZE(power_props);
+ mbc->ac.get_property = ac_get_property;
+ mbc->ac.supplied_to = mbc->pcf->pdata->batteries;
+ mbc->ac.num_supplicants = mbc->pcf->pdata->num_batteries;
+
ret = power_supply_register(&pdev->dev, &mbc->adapter);
if (ret) {
dev_err(mbc->pcf->dev, "failed to register adapter\n");
@@ -352,8 +419,14 @@ static int __devinit pcf50633_mbc_probe(struct platform_device *pdev)
return ret;
}
- INIT_DELAYED_WORK(&mbc->charging_restart_work,
- pcf50633_mbc_charging_restart);
+ ret = power_supply_register(&pdev->dev, &mbc->ac);
+ if (ret) {
+ dev_err(mbc->pcf->dev, "failed to register ac\n");
+ power_supply_unregister(&mbc->adapter);
+ power_supply_unregister(&mbc->usb);
+ kfree(mbc);
+ return ret;
+ }
ret = sysfs_create_group(&pdev->dev.kobj, &mbc_attr_group);
if (ret)
@@ -379,8 +452,7 @@ static int __devexit pcf50633_mbc_remove(struct platform_device *pdev)
power_supply_unregister(&mbc->usb);
power_supply_unregister(&mbc->adapter);
-
- cancel_delayed_work_sync(&mbc->charging_restart_work);
+ power_supply_unregister(&mbc->ac);
kfree(mbc);
diff --git a/drivers/power/platform_battery.c b/drivers/power/platform_battery.c
new file mode 100644
index 00000000000..99e155a2057
--- /dev/null
+++ b/drivers/power/platform_battery.c
@@ -0,0 +1,119 @@
+/*
+ * Driver for platform battery
+ *
+ * Copyright (c) Paul Fertser <fercerpav@gmail.com>
+ * Inspired by Balaji Rao <balajirrao@openmoko.org>
+ *
+ * This driver can be used for dumb batteries when all knowledge about
+ * their state belongs to the platform that does necessary ADC readings,
+ * conversions, guessimations etc.
+ *
+ * Use consistent with the GNU GPL is permitted, provided that this
+ * copyright notice is preserved in its entirety in all copies and derived
+ * works.
+ */
+
+#include <linux/module.h>
+#include <linux/param.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/platform_device.h>
+#include <linux/power_supply.h>
+#include <linux/platform_battery.h>
+
+struct platform_battery {
+ struct power_supply psy;
+ struct platform_bat_platform_data *pdata;
+};
+
+static int platform_bat_get_property(struct power_supply *psy,
+ enum power_supply_property psp,
+ union power_supply_propval *val)
+{
+ struct platform_battery *bat =
+ container_of(psy, struct platform_battery, psy);
+ size_t i;
+ int present=1;
+
+ if (bat->pdata->is_present)
+ present = bat->pdata->is_present();
+
+ if (psp != POWER_SUPPLY_PROP_PRESENT && !present)
+ return -ENODEV;
+
+ for (i = 0; i < psy->num_properties; i++)
+ if (psy->properties[i] == psp) {
+ val->intval = bat->pdata->get_property[i]();
+ return 0;
+ }
+
+ return -EINVAL;
+}
+
+static void platform_bat_ext_changed(struct power_supply *psy)
+{
+ struct platform_battery *bat =
+ container_of(psy, struct platform_battery, psy);
+ power_supply_changed(&bat->psy);
+}
+
+static int platform_battery_probe(struct platform_device *pdev)
+{
+ struct platform_battery *platform_bat;
+ struct platform_bat_platform_data *pdata =
+ (struct platform_bat_platform_data *)pdev->dev.platform_data;
+
+ platform_bat = kzalloc(sizeof(*platform_bat), GFP_KERNEL);
+ if (!platform_bat)
+ return -ENOMEM;
+
+ if (pdata->name)
+ platform_bat->psy.name = pdata->name;
+ else
+ platform_bat->psy.name = dev_name(&pdev->dev);
+ platform_bat->psy.type = POWER_SUPPLY_TYPE_BATTERY;
+ platform_bat->psy.properties = pdata->properties;
+ platform_bat->psy.num_properties = pdata->num_properties;
+ platform_bat->psy.get_property = platform_bat_get_property;
+ platform_bat->psy.external_power_changed = platform_bat_ext_changed;
+
+ platform_bat->pdata = pdata;
+ platform_set_drvdata(pdev, platform_bat);
+ power_supply_register(&pdev->dev, &platform_bat->psy);
+
+ return 0;
+}
+
+static int platform_battery_remove(struct platform_device *pdev)
+{
+ struct platform_battery *bat = platform_get_drvdata(pdev);
+
+ power_supply_unregister(&bat->psy);
+ kfree(bat);
+
+ return 0;
+}
+
+static struct platform_driver platform_battery_driver = {
+ .driver = {
+ .name = "platform_battery",
+ },
+ .probe = platform_battery_probe,
+ .remove = platform_battery_remove,
+};
+
+static int __init platform_battery_init(void)
+{
+ return platform_driver_register(&platform_battery_driver);
+}
+module_init(platform_battery_init);
+
+static void __exit platform_battery_exit(void)
+{
+ platform_driver_unregister(&platform_battery_driver);
+}
+module_exit(platform_battery_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("Paul Fertser <fercerpav@gmail.com>");
+MODULE_DESCRIPTION("platform battery driver");
diff --git a/drivers/regulator/pcf50633-regulator.c b/drivers/regulator/pcf50633-regulator.c
index 0803ffe6236..c8f41dc05b7 100644
--- a/drivers/regulator/pcf50633-regulator.c
+++ b/drivers/regulator/pcf50633-regulator.c
@@ -314,13 +314,15 @@ static int __devinit pcf50633_regulator_probe(struct platform_device *pdev)
struct pcf50633 *pcf;
/* Already set by core driver */
- pcf = platform_get_drvdata(pdev);
+ pcf = dev_to_pcf50633(pdev->dev.parent);
rdev = regulator_register(&regulators[pdev->id], &pdev->dev,
pdev->dev.platform_data, pcf);
if (IS_ERR(rdev))
return PTR_ERR(rdev);
+ platform_set_drvdata(pdev, rdev);
+
if (pcf->pdata->regulator_registered)
pcf->pdata->regulator_registered(pcf, pdev->id);
@@ -331,6 +333,7 @@ static int __devexit pcf50633_regulator_remove(struct platform_device *pdev)
{
struct regulator_dev *rdev = platform_get_drvdata(pdev);
+ platform_set_drvdata(pdev, NULL);
regulator_unregister(rdev);
return 0;
diff --git a/drivers/rtc/rtc-pcf50633.c b/drivers/rtc/rtc-pcf50633.c
index 4c5d5d0c4cf..854c3cb365a 100644
--- a/drivers/rtc/rtc-pcf50633.c
+++ b/drivers/rtc/rtc-pcf50633.c
@@ -58,6 +58,7 @@ struct pcf50633_time {
struct pcf50633_rtc {
int alarm_enabled;
int second_enabled;
+ int alarm_pending;
struct pcf50633 *pcf;
struct rtc_device *rtc_dev;
@@ -209,6 +210,7 @@ static int pcf50633_rtc_read_alarm(struct device *dev, struct rtc_wkalrm *alrm)
rtc = dev_get_drvdata(dev);
alrm->enabled = rtc->alarm_enabled;
+ alrm->pending = rtc->alarm_pending;
ret = pcf50633_read_block(rtc->pcf, PCF50633_REG_RTCSCA,
PCF50633_TI_EXTENT, &pcf_tm.time[0]);
@@ -244,6 +246,8 @@ static int pcf50633_rtc_set_alarm(struct device *dev, struct rtc_wkalrm *alrm)
/* Returns 0 on success */
ret = pcf50633_write_block(rtc->pcf, PCF50633_REG_RTCSCA,
PCF50633_TI_EXTENT, &pcf_tm.time[0]);
+ if (!alrm->enabled)
+ rtc->alarm_pending = 0;
if (!alarm_masked || alrm->enabled)
pcf50633_irq_unmask(rtc->pcf, PCF50633_IRQ_ALARM);
@@ -268,6 +272,7 @@ static void pcf50633_rtc_irq(int irq, void *data)
switch (irq) {
case PCF50633_IRQ_ALARM:
rtc_update_irq(rtc->rtc_dev, 1, RTC_AF | RTC_IRQF);
+ rtc->alarm_pending = 1;
break;
case PCF50633_IRQ_SECOND:
rtc_update_irq(rtc->rtc_dev, 1, RTC_UF | RTC_IRQF);
@@ -277,16 +282,13 @@ static void pcf50633_rtc_irq(int irq, void *data)
static int __devinit pcf50633_rtc_probe(struct platform_device *pdev)
{
- struct pcf50633_subdev_pdata *pdata;
struct pcf50633_rtc *rtc;
-
rtc = kzalloc(sizeof(*rtc), GFP_KERNEL);
if (!rtc)
return -ENOMEM;
- pdata = pdev->dev.platform_data;
- rtc->pcf = pdata->pcf;
+ rtc->pcf = dev_to_pcf50633(pdev->dev.parent);
platform_set_drvdata(pdev, rtc);
rtc->rtc_dev = rtc_device_register("pcf50633-rtc", &pdev->dev,
&pcf50633_rtc_ops, THIS_MODULE);
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index 1523e8d9ae7..e0062b5626c 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -1263,6 +1263,13 @@ module_exit(s3c24xx_serial_modexit);
#ifdef CONFIG_SERIAL_SAMSUNG_CONSOLE
static struct uart_port *cons_uart;
+static int cons_silenced;
+
+void s3c24xx_serial_console_set_silence(int silenced)
+{
+ cons_silenced = silenced;
+}
+EXPORT_SYMBOL(s3c24xx_serial_console_set_silence);
static int
s3c24xx_serial_console_txrdy(struct uart_port *port, unsigned int ufcon)
@@ -1287,9 +1294,21 @@ static void
s3c24xx_serial_console_putchar(struct uart_port *port, int ch)
{
unsigned int ufcon = rd_regl(cons_uart, S3C2410_UFCON);
+ unsigned int umcon = rd_regl(cons_uart, S3C2410_UMCON);
+
+ if (cons_silenced)
+ return;
+
+ /* If auto HW flow control enabled, temporarily turn it off */
+ if (umcon & S3C2410_UMCOM_AFC)
+ wr_regl(port, S3C2410_UMCON, (umcon & !S3C2410_UMCOM_AFC));
+
while (!s3c24xx_serial_console_txrdy(port, ufcon))
barrier();
wr_regb(cons_uart, S3C2410_UTXH, ch);
+
+ if (umcon & S3C2410_UMCOM_AFC)
+ wr_regl(port, S3C2410_UMCON, umcon);
}
static void
diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c
index d5f4c1d45c9..e6b76d812c3 100644
--- a/drivers/usb/gadget/s3c2410_udc.c
+++ b/drivers/usb/gadget/s3c2410_udc.c
@@ -842,6 +842,7 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
u32 ep_csr1;
u32 idx;
+handle_ep_again:
if (likely (!list_empty(&ep->queue)))
req = list_entry(ep->queue.next,
struct s3c2410_request, queue);
@@ -881,6 +882,8 @@ static void s3c2410_udc_handle_ep(struct s3c2410_ep *ep)
if ((ep_csr1 & S3C2410_UDC_OCSR1_PKTRDY) && req) {
s3c2410_udc_read_fifo(ep,req);
+ if (s3c2410_udc_fifo_count_out())
+ goto handle_ep_again;
}
}
}
diff --git a/drivers/video/backlight/Kconfig b/drivers/video/backlight/Kconfig
index 09bfa9662e4..ced9bff3a6b 100644
--- a/drivers/video/backlight/Kconfig
+++ b/drivers/video/backlight/Kconfig
@@ -100,6 +100,20 @@ config LCD_HP700
If you have an HP Jornada 700 series handheld (710/720/728)
say Y to enable LCD control driver.
+config LCD_JBT6K74
+ tristate "TPO JBT6K74-AS TFT display ASIC control interface"
+ depends on SPI_MASTER && SYSFS && LCD_CLASS_DEVICE
+ help
+ SPI driver for the control interface of TFT panels containing
+ the TPO JBT6K74-AS controller ASIC, such as the TPO TD028TTEC1
+ TFT diplay module used in the Openmoko Freerunner GSM phone.
+
+ The control interface is required for display operation, as it
+ controls power management, display timing and gamma calibration.
+
+ This driver can also be build as a module, if so it will be called
+ jbt6k74.
+
#
# Backlight
#
@@ -262,3 +276,9 @@ config BACKLIGHT_ADP5520
To compile this driver as a module, choose M here: the module will
be called adp5520_bl.
+config BACKLIGHT_PCF50633
+ tristate "Backlight driver for NXP PCF50633 MFD"
+ depends on BACKLIGHT_CLASS_DEVICE && MFD_PCF50633
+ help
+ If you have a backlight driven by a NXP PCF50633 MFD, say Y here to
+ enable its driver.
diff --git a/drivers/video/backlight/Makefile b/drivers/video/backlight/Makefile
index 9a405548874..c2ceb18c0b1 100644
--- a/drivers/video/backlight/Makefile
+++ b/drivers/video/backlight/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_LCD_PLATFORM) += platform_lcd.o
obj-$(CONFIG_LCD_VGG2432A4) += vgg2432a4.o
obj-$(CONFIG_LCD_TDO24M) += tdo24m.o
obj-$(CONFIG_LCD_TOSA) += tosa_lcd.o
+obj-$(CONFIG_LCD_JBT6K74) += jbt6k74.o
obj-$(CONFIG_BACKLIGHT_CLASS_DEVICE) += backlight.o
obj-$(CONFIG_BACKLIGHT_ATMEL_PWM) += atmel-pwm-bl.o
@@ -28,4 +29,5 @@ obj-$(CONFIG_BACKLIGHT_SAHARA) += kb3886_bl.o
obj-$(CONFIG_BACKLIGHT_WM831X) += wm831x_bl.o
obj-$(CONFIG_BACKLIGHT_ADX) += adx_bl.o
obj-$(CONFIG_BACKLIGHT_ADP5520) += adp5520_bl.o
+obj-$(CONFIG_BACKLIGHT_PCF50633) += pcf50633-backlight.o
diff --git a/drivers/video/backlight/jbt6k74.c b/drivers/video/backlight/jbt6k74.c
new file mode 100644
index 00000000000..8450904d585
--- /dev/null
+++ b/drivers/video/backlight/jbt6k74.c
@@ -0,0 +1,896 @@
+/* Linux kernel driver for the tpo JBT6K74-AS LCM ASIC
+ *
+ * Copyright (C) 2006-2007 by Openmoko, Inc.
+ * Author: Harald Welte <laforge@openmoko.org>,
+ * Stefan Schmidt <stefan@openmoko.org>
+ * Copyright (C) 2008 by Harald Welte <laforge@openmoko.org>
+ * Copyright (C) 2009 by Lars-Peter Clausen <lars@metafoo.de>
+ * All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or
+ * modify it under the terms of the GNU General Public License as
+ * published by the Free Software Foundation; either version 2 of
+ * the License, or (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
+ * MA 02111-1307 USA
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/device.h>
+#include <linux/platform_device.h>
+#include <linux/delay.h>
+#include <linux/workqueue.h>
+#include <linux/jbt6k74.h>
+#include <linux/fb.h>
+#include <linux/lcd.h>
+#include <linux/time.h>
+#include <linux/regulator/consumer.h>
+#include <linux/gpio.h>
+
+enum jbt_register {
+ JBT_REG_SLEEP_IN = 0x10,
+ JBT_REG_SLEEP_OUT = 0x11,
+
+ JBT_REG_DISPLAY_OFF = 0x28,
+ JBT_REG_DISPLAY_ON = 0x29,
+
+ JBT_REG_RGB_FORMAT = 0x3a,
+ JBT_REG_QUAD_RATE = 0x3b,
+
+ JBT_REG_POWER_ON_OFF = 0xb0,
+ JBT_REG_BOOSTER_OP = 0xb1,
+ JBT_REG_BOOSTER_MODE = 0xb2,
+ JBT_REG_BOOSTER_FREQ = 0xb3,
+ JBT_REG_OPAMP_SYSCLK = 0xb4,
+ JBT_REG_VSC_VOLTAGE = 0xb5,
+ JBT_REG_VCOM_VOLTAGE = 0xb6,
+ JBT_REG_EXT_DISPL = 0xb7,
+ JBT_REG_OUTPUT_CONTROL = 0xb8,
+ JBT_REG_DCCLK_DCEV = 0xb9,
+ JBT_REG_DISPLAY_MODE1 = 0xba,
+ JBT_REG_DISPLAY_MODE2 = 0xbb,
+ JBT_REG_DISPLAY_MODE = 0xbc,
+ JBT_REG_ASW_SLEW = 0xbd,
+ JBT_REG_DUMMY_DISPLAY = 0xbe,
+ JBT_REG_DRIVE_SYSTEM = 0xbf,
+
+ JBT_REG_SLEEP_OUT_FR_A = 0xc0,
+ JBT_REG_SLEEP_OUT_FR_B = 0xc1,
+ JBT_REG_SLEEP_OUT_FR_C = 0xc2,
+ JBT_REG_SLEEP_IN_LCCNT_D = 0xc3,
+ JBT_REG_SLEEP_IN_LCCNT_E = 0xc4,
+ JBT_REG_SLEEP_IN_LCCNT_F = 0xc5,
+ JBT_REG_SLEEP_IN_LCCNT_G = 0xc6,
+
+ JBT_REG_GAMMA1_FINE_1 = 0xc7,
+ JBT_REG_GAMMA1_FINE_2 = 0xc8,
+ JBT_REG_GAMMA1_INCLINATION = 0xc9,
+ JBT_REG_GAMMA1_BLUE_OFFSET = 0xca,
+
+ /* VGA */
+ JBT_REG_BLANK_CONTROL = 0xcf,
+ JBT_REG_BLANK_TH_TV = 0xd0,
+ JBT_REG_CKV_ON_OFF = 0xd1,
+ JBT_REG_CKV_1_2 = 0xd2,
+ JBT_REG_OEV_TIMING = 0xd3,
+ JBT_REG_ASW_TIMING_1 = 0xd4,
+ JBT_REG_ASW_TIMING_2 = 0xd5,
+
+ /* QVGA */
+ JBT_REG_BLANK_CONTROL_QVGA = 0xd6,
+ JBT_REG_BLANK_TH_TV_QVGA = 0xd7,
+ JBT_REG_CKV_ON_OFF_QVGA = 0xd8,
+ JBT_REG_CKV_1_2_QVGA = 0xd9,
+ JBT_REG_OEV_TIMING_QVGA = 0xde,
+ JBT_REG_ASW_TIMING_1_QVGA = 0xdf,
+ JBT_REG_ASW_TIMING_2_QVGA = 0xe0,
+
+
+ JBT_REG_HCLOCK_VGA = 0xec,
+ JBT_REG_HCLOCK_QVGA = 0xed,
+};
+
+enum jbt_resolution {
+ JBT_RESOLUTION_VGA,
+ JBT_RESOLUTION_QVGA,
+};
+
+enum jbt_power_mode {
+ JBT_POWER_MODE_DEEP_STANDBY,
+ JBT_POWER_MODE_SLEEP,
+ JBT_POWER_MODE_NORMAL,
+};
+
+static const char *jbt_power_mode_names[] = {
+ [JBT_POWER_MODE_DEEP_STANDBY] = "deep-standby",
+ [JBT_POWER_MODE_SLEEP] = "sleep",
+ [JBT_POWER_MODE_NORMAL] = "normal",
+};
+
+static const char *jbt_resolution_names[] = {
+ [JBT_RESOLUTION_VGA] = "vga",
+ [JBT_RESOLUTION_QVGA] = "qvga",
+};
+
+struct jbt_info {
+ struct mutex lock; /* protects this structure */
+ enum jbt_resolution resolution;
+ enum jbt_power_mode power_mode;
+ enum jbt_power_mode suspend_mode;
+ int suspended;
+
+ struct spi_device *spi;
+ struct lcd_device *lcd_dev;
+
+ unsigned long next_sleep;
+ struct delayed_work blank_work;
+ int blank_mode;
+ struct regulator_bulk_data supplies[2];
+ uint16_t tx_buf[3];
+ uint16_t reg_cache[0xEE];
+};
+
+#define JBT_COMMAND 0x000
+#define JBT_DATA 0x100
+
+static int jbt_reg_write_nodata(struct jbt_info *jbt, uint8_t reg)
+{
+ int ret;
+
+ jbt->tx_buf[0] = JBT_COMMAND | reg;
+ ret = spi_write(jbt->spi, (uint8_t *)jbt->tx_buf,
+ sizeof(uint16_t));
+ if (ret == 0)
+ jbt->reg_cache[reg] = 0;
+ else
+ dev_err(&jbt->spi->dev, "Write failed: %d\n", ret);
+
+ return ret;
+}
+
+
+static int jbt_reg_write(struct jbt_info *jbt, uint8_t reg, uint8_t data)
+{
+ int ret;
+
+ jbt->tx_buf[0] = JBT_COMMAND | reg;
+ jbt->tx_buf[1] = JBT_DATA | data;
+ ret = spi_write(jbt->spi, (uint8_t *)jbt->tx_buf,
+ 2*sizeof(uint16_t));
+ if (ret == 0)
+ jbt->reg_cache[reg] = data;
+ else
+ dev_err(&jbt->spi->dev, "Write failed: %d\n", ret);
+
+ return ret;
+}
+
+static int jbt_reg_write16(struct jbt_info *jbt, uint8_t reg, uint16_t data)
+{
+ int ret;
+
+ jbt->tx_buf[0] = JBT_COMMAND | reg;
+ jbt->tx_buf[1] = JBT_DATA | (data >> 8);
+ jbt->tx_buf[2] = JBT_DATA | (data & 0xff);
+
+ ret = spi_write(jbt->spi, (uint8_t *)jbt->tx_buf,
+ 3*sizeof(uint16_t));
+ if (ret == 0)
+ jbt->reg_cache[reg] = data;
+ else
+ dev_err(&jbt->spi->dev, "Write failed: %d\n", ret);
+
+ return ret;
+}
+
+static int jbt_init_regs(struct jbt_info *jbt)
+{
+ int ret;
+
+ dev_dbg(&jbt->spi->dev, "entering %cVGA mode\n",
+ jbt->resolution == JBT_RESOLUTION_QVGA ? 'Q' : ' ');
+
+ ret = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE1, 0x01);
+ ret |= jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE2, 0x00);
+ ret |= jbt_reg_write(jbt, JBT_REG_RGB_FORMAT, 0x60);
+ ret |= jbt_reg_write(jbt, JBT_REG_DRIVE_SYSTEM, 0x10);
+ ret |= jbt_reg_write(jbt, JBT_REG_BOOSTER_OP, 0x56);
+ ret |= jbt_reg_write(jbt, JBT_REG_BOOSTER_MODE, 0x33);
+ ret |= jbt_reg_write(jbt, JBT_REG_BOOSTER_FREQ, 0x11);
+ ret |= jbt_reg_write(jbt, JBT_REG_OPAMP_SYSCLK, 0x02);
+ ret |= jbt_reg_write(jbt, JBT_REG_VSC_VOLTAGE, 0x2b);
+ ret |= jbt_reg_write(jbt, JBT_REG_VCOM_VOLTAGE, 0x40);
+ ret |= jbt_reg_write(jbt, JBT_REG_EXT_DISPL, 0x03);
+ ret |= jbt_reg_write(jbt, JBT_REG_DCCLK_DCEV, 0x04);
+ /*
+ * default of 0x02 in JBT_REG_ASW_SLEW responsible for 72Hz requirement
+ * to avoid red / blue flicker
+ */
+ ret |= jbt_reg_write(jbt, JBT_REG_ASW_SLEW, 0x00 | (1 << 5));
+ ret |= jbt_reg_write(jbt, JBT_REG_DUMMY_DISPLAY, 0x00);
+
+ ret |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_A, 0x11);
+ ret |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_B, 0x11);
+ ret |= jbt_reg_write(jbt, JBT_REG_SLEEP_OUT_FR_C, 0x11);
+ ret |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_D, 0x2040);
+ ret |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_E, 0x60c0);
+ ret |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_F, 0x1020);
+ ret |= jbt_reg_write16(jbt, JBT_REG_SLEEP_IN_LCCNT_G, 0x60c0);
+
+ ret |= jbt_reg_write16(jbt, JBT_REG_GAMMA1_FINE_1, 0x5533);
+ ret |= jbt_reg_write(jbt, JBT_REG_GAMMA1_FINE_2, 0x00);
+ ret |= jbt_reg_write(jbt, JBT_REG_GAMMA1_INCLINATION, 0x00);
+ ret |= jbt_reg_write(jbt, JBT_REG_GAMMA1_BLUE_OFFSET, 0x00);
+
+ if (jbt->resolution != JBT_RESOLUTION_QVGA) {
+ ret |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_VGA, 0x1f0);
+ ret |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL, 0x02);
+ ret |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV, 0x0804);
+
+ ret |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF, 0x01);
+ ret |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2, 0x0000);
+
+ ret |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING, 0x0d0e);
+ ret |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1, 0x11a4);
+ ret |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2, 0x0e);
+ } else {
+ ret |= jbt_reg_write16(jbt, JBT_REG_HCLOCK_QVGA, 0x00ff);
+ ret |= jbt_reg_write(jbt, JBT_REG_BLANK_CONTROL_QVGA, 0x02);
+ ret |= jbt_reg_write16(jbt, JBT_REG_BLANK_TH_TV_QVGA, 0x0804);
+
+ ret |= jbt_reg_write(jbt, JBT_REG_CKV_ON_OFF_QVGA, 0x01);
+ ret |= jbt_reg_write16(jbt, JBT_REG_CKV_1_2_QVGA, 0x0008);
+
+ ret |= jbt_reg_write16(jbt, JBT_REG_OEV_TIMING_QVGA, 0x050a);
+ ret |= jbt_reg_write16(jbt, JBT_REG_ASW_TIMING_1_QVGA, 0x0a19);
+ ret |= jbt_reg_write(jbt, JBT_REG_ASW_TIMING_2_QVGA, 0x0a);
+ }
+
+ return ret ? -EIO : 0;
+}
+
+static int jbt_standby_to_sleep(struct jbt_info *jbt)
+{
+ int ret;
+ struct jbt6k74_platform_data *pdata = jbt->spi->dev.platform_data;
+
+ gpio_set_value_cansleep(pdata->gpio_reset, 1);
+ ret = regulator_bulk_enable(ARRAY_SIZE(jbt->supplies), jbt->supplies);
+
+ /* three times command zero */
+ ret |= jbt_reg_write_nodata(jbt, 0x00);
+ mdelay(1);
+ ret |= jbt_reg_write_nodata(jbt, 0x00);
+ mdelay(1);
+ ret |= jbt_reg_write_nodata(jbt, 0x00);
+ mdelay(1);
+
+ /* deep standby out */
+ ret |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x11);
+ mdelay(1);
+ ret = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x28);
+
+ /* (re)initialize register set */
+ ret |= jbt_init_regs(jbt);
+
+ return ret ? -EIO : 0;
+}
+
+static int jbt_sleep_to_normal(struct jbt_info *jbt)
+{
+ int ret;
+
+ /* Make sure we are 120 ms after SLEEP_OUT */
+ if (time_before(jiffies, jbt->next_sleep))
+ mdelay(jiffies_to_msecs(jbt->next_sleep - jiffies));
+
+ if (jbt->resolution == JBT_RESOLUTION_VGA) {
+ /* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */
+ ret = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x80);
+
+ /* Quad mode off */
+ ret |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x00);
+ } else {
+ /* RGB I/F on, RAM wirte off, QVGA through, SIGCON enable */
+ ret = jbt_reg_write(jbt, JBT_REG_DISPLAY_MODE, 0x81);
+
+ /* Quad mode on */
+ ret |= jbt_reg_write(jbt, JBT_REG_QUAD_RATE, 0x22);
+ }
+
+ /* AVDD on, XVDD on */
+ ret |= jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x16);
+
+ /* Output control */
+ ret |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0xdff9);
+
+ /* Turn on display */
+ ret |= jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_ON);
+
+ /* Sleep mode off */
+ ret |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_OUT);
+ jbt->next_sleep = jiffies + msecs_to_jiffies(120);
+
+ /* Allow the booster and display controller to restart stably */
+ mdelay(5);
+
+ return ret ? -EIO : 0;
+}
+
+static int jbt_normal_to_sleep(struct jbt_info *jbt)
+{
+ int ret;
+
+ /* Make sure we are 120 ms after SLEEP_OUT */
+ while (time_before(jiffies, jbt->next_sleep))
+ cpu_relax();
+
+ ret = jbt_reg_write_nodata(jbt, JBT_REG_DISPLAY_OFF);
+ ret |= jbt_reg_write16(jbt, JBT_REG_OUTPUT_CONTROL, 0x8000 | 1 << 3);
+ ret |= jbt_reg_write_nodata(jbt, JBT_REG_SLEEP_IN);
+ jbt->next_sleep = jiffies + msecs_to_jiffies(120);
+
+ /* Allow the internal circuits to stop automatically */
+ mdelay(5);
+
+ return ret ? -EIO : 0;
+}
+
+static int jbt_sleep_to_standby(struct jbt_info *jbt)
+{
+ int ret;
+ struct jbt6k74_platform_data *pdata = jbt->spi->dev.platform_data;
+
+ ret = jbt_reg_write(jbt, JBT_REG_POWER_ON_OFF, 0x00);
+
+ if (!ret)
+ ret = regulator_bulk_disable(ARRAY_SIZE(jbt->supplies), jbt->supplies);
+
+ if (!ret)
+ gpio_set_value_cansleep(pdata->gpio_reset, 0);
+
+ return ret;
+}
+
+static int jbt6k74_enter_power_mode(struct jbt_info *jbt,
+ enum jbt_power_mode new_mode)
+{
+ struct jbt6k74_platform_data *pdata = jbt->spi->dev.platform_data;
+ int ret = -EINVAL;
+
+ dev_dbg(&jbt->spi->dev, "entering (old_state=%s, new_state=%s)\n",
+ jbt_power_mode_names[jbt->power_mode],
+ jbt_power_mode_names[new_mode]);
+
+ mutex_lock(&jbt->lock);
+
+ if (jbt->suspended) {
+ switch (new_mode) {
+ case JBT_POWER_MODE_DEEP_STANDBY:
+ case JBT_POWER_MODE_SLEEP:
+ case JBT_POWER_MODE_NORMAL:
+ ret = 0;
+ jbt->suspend_mode = new_mode;
+ break;
+ default:
+ break;
+ }
+ } else if (new_mode == JBT_POWER_MODE_NORMAL &&
+ pdata->enable_pixel_clock) {
+ pdata->enable_pixel_clock(&jbt->spi->dev, 1);
+ }
+
+ switch (jbt->power_mode) {
+ case JBT_POWER_MODE_DEEP_STANDBY:
+ switch (new_mode) {
+ case JBT_POWER_MODE_DEEP_STANDBY:
+ ret = 0;
+ break;
+ case JBT_POWER_MODE_SLEEP:
+ ret = jbt_standby_to_sleep(jbt);
+ break;
+ case JBT_POWER_MODE_NORMAL:
+ /* first transition into sleep */
+ ret = jbt_standby_to_sleep(jbt);
+ /* then transition into normal */
+ ret |= jbt_sleep_to_normal(jbt);
+ break;
+ }
+ break;
+ case JBT_POWER_MODE_SLEEP:
+ switch (new_mode) {
+ case JBT_POWER_MODE_SLEEP:
+ ret = 0;
+ break;
+ case JBT_POWER_MODE_DEEP_STANDBY:
+ ret = jbt_sleep_to_standby(jbt);
+ break;
+ case JBT_POWER_MODE_NORMAL:
+ ret = jbt_sleep_to_normal(jbt);
+ break;
+ }
+ break;
+ case JBT_POWER_MODE_NORMAL:
+ switch (new_mode) {
+ case JBT_POWER_MODE_NORMAL:
+ ret = 0;
+ break;
+ case JBT_POWER_MODE_DEEP_STANDBY:
+ /* first transition into sleep */
+ ret = jbt_normal_to_sleep(jbt);
+ /* then transition into deep standby */
+ ret |= jbt_sleep_to_standby(jbt);
+ break;
+ case JBT_POWER_MODE_SLEEP:
+ ret = jbt_normal_to_sleep(jbt);
+ break;
+ }
+ }
+
+ if (ret == 0) {
+ jbt->power_mode = new_mode;
+ if (new_mode != JBT_POWER_MODE_NORMAL &&
+ pdata->enable_pixel_clock)
+ pdata->enable_pixel_clock(&jbt->spi->dev, 0);
+ } else {
+ dev_err(&jbt->spi->dev, "Failed enter state '%s': %d\n",
+ jbt_power_mode_names[new_mode], ret);
+ }
+
+ mutex_unlock(&jbt->lock);
+
+ return ret;
+}
+
+static int jbt6k74_set_resolution(struct jbt_info *jbt,
+ enum jbt_resolution new_resolution)
+{
+ int ret = 0;
+ enum jbt_resolution old_resolution;
+
+ mutex_lock(&jbt->lock);
+
+ if (jbt->resolution == new_resolution)
+ goto out_unlock;
+
+ old_resolution = jbt->resolution;
+ jbt->resolution = new_resolution;
+
+ if (jbt->power_mode == JBT_POWER_MODE_NORMAL) {
+
+ /* first transition into sleep */
+ ret = jbt_normal_to_sleep(jbt);
+ ret |= jbt_sleep_to_normal(jbt);
+
+ if (ret) {
+ jbt->resolution = old_resolution;
+ dev_err(&jbt->spi->dev, "Failed to set resolution '%s')\n",
+ jbt_resolution_names[new_resolution]);
+ }
+ }
+
+out_unlock:
+ mutex_unlock(&jbt->lock);
+
+ return ret;
+}
+
+static ssize_t resolution_read(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct jbt_info *jbt = dev_get_drvdata(dev);
+
+ if (jbt->resolution >= ARRAY_SIZE(jbt_resolution_names))
+ return -EIO;
+
+ return sprintf(buf, "%s\n", jbt_resolution_names[jbt->resolution]);
+}
+
+static ssize_t resolution_write(struct device *dev,
+ struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ struct jbt_info *jbt = dev_get_drvdata(dev);
+ int i, ret;
+
+ for (i = 0; i < ARRAY_SIZE(jbt_resolution_names); i++) {
+ if (!strncmp(buf, jbt_resolution_names[i],
+ strlen(jbt_resolution_names[i]))) {
+ ret = jbt6k74_set_resolution(jbt, i);
+ if (ret)
+ return ret;
+ return count;
+ }
+ }
+
+ return -EINVAL;
+}
+
+static DEVICE_ATTR(resolution, 0644, resolution_read, resolution_write);
+
+static int reg_by_string(const char *name)
+{
+ if (!strcmp(name, "gamma_fine1"))
+ return JBT_REG_GAMMA1_FINE_1;
+ else if (!strcmp(name, "gamma_fine2"))
+ return JBT_REG_GAMMA1_FINE_2;
+ else if (!strcmp(name, "gamma_inclination"))
+ return JBT_REG_GAMMA1_INCLINATION;
+ else
+ return JBT_REG_GAMMA1_BLUE_OFFSET;
+}
+
+static ssize_t gamma_read(struct device *dev, struct device_attribute *attr,
+ char *buf)
+{
+ struct jbt_info *jbt = dev_get_drvdata(dev);
+ int reg = reg_by_string(attr->attr.name);
+ uint16_t val;
+
+ mutex_lock(&jbt->lock);
+ val = jbt->reg_cache[reg];
+ mutex_unlock(&jbt->lock);
+
+ return sprintf(buf, "0x%04x\n", val);
+}
+
+static ssize_t gamma_write(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ struct jbt_info *jbt = dev_get_drvdata(dev);
+ int reg = reg_by_string(attr->attr.name);
+ unsigned long val;
+
+ ret = strict_strtoul(buf, 10, &val);
+ if (ret)
+ return ret;
+
+ mutex_lock(&jbt->lock);
+ jbt_reg_write(jbt, reg, val & 0xff);
+ mutex_unlock(&jbt->lock);
+
+ return count;
+}
+
+static ssize_t reset_write(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
+{
+ int ret;
+ struct jbt_info *jbt = dev_get_drvdata(dev);
+ struct jbt6k74_platform_data *pdata = jbt->spi->dev.platform_data;
+ enum jbt_power_mode old_power_mode = jbt->power_mode;
+
+ mutex_lock(&jbt->lock);
+
+ if (gpio_is_valid(pdata->gpio_reset)) {
+ /* hard reset the jbt6k74 */
+ gpio_set_value_cansleep(pdata->gpio_reset, 0);
+ mdelay(120);
+ gpio_set_value_cansleep(pdata->gpio_reset, 1);
+ mdelay(120);
+ }
+
+ ret = jbt_reg_write_nodata(jbt, 0x01);
+ if (ret < 0)
+ dev_err(&jbt->spi->dev, "cannot soft reset\n");
+ mdelay(120);
+
+ mutex_unlock(&jbt->lock);
+
+ jbt->power_mode = JBT_POWER_MODE_DEEP_STANDBY;
+ jbt6k74_enter_power_mode(jbt, old_power_mode);
+
+ return count;
+}
+
+static DEVICE_ATTR(gamma_fine1, 0644, gamma_read, gamma_write);
+static DEVICE_ATTR(gamma_fine2, 0644, gamma_read, gamma_write);
+static DEVICE_ATTR(gamma_inclination, 0644, gamma_read, gamma_write);
+static DEVICE_ATTR(gamma_blue_offset, 0644, gamma_read, gamma_write);
+static DEVICE_ATTR(reset, 0600, NULL, reset_write);
+
+static struct attribute *jbt_sysfs_entries[] = {
+ &dev_attr_resolution.attr,
+ &dev_attr_gamma_fine1.attr,
+ &dev_attr_gamma_fine2.attr,
+ &dev_attr_gamma_inclination.attr,
+ &dev_attr_gamma_blue_offset.attr,
+ &dev_attr_reset.attr,
+ NULL,
+};
+
+static struct attribute_group jbt_attr_group = {
+ .name = NULL,
+ .attrs = jbt_sysfs_entries,
+};
+
+/* FIXME: This in an ugly hack to delay display blanking.
+ When the jbt is in sleep mode it displays an all white screen and thus one
+ will a see a short flash.
+ By delaying the blanking we will give the backlight a chance to turn off and
+ thus avoid getting the flash */
+static void jbt_blank_worker(struct work_struct *work)
+{
+ struct jbt_info *jbt = container_of(work, struct jbt_info,
+ blank_work.work);
+
+ switch (jbt->blank_mode) {
+ case FB_BLANK_NORMAL:
+ jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_SLEEP);
+ break;
+ case FB_BLANK_POWERDOWN:
+ jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_DEEP_STANDBY);
+ break;
+ default:
+ break;
+ }
+}
+
+static int jbt6k74_set_mode(struct lcd_device *ld, struct fb_videomode *m)
+{
+ int ret = -EINVAL;
+ struct jbt_info *jbt = dev_get_drvdata(&ld->dev);
+
+ if (m->xres == 240 && m->yres == 320) {
+ ret = jbt6k74_set_resolution(jbt, JBT_RESOLUTION_QVGA);
+ } else if (m->xres == 480 && m->yres == 640) {
+ ret = jbt6k74_set_resolution(jbt, JBT_RESOLUTION_VGA);
+ } else {
+ dev_err(&jbt->spi->dev, "Unknown resolution.\n");
+ jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_SLEEP);
+ }
+
+ return ret;
+}
+
+static int jbt6k74_set_power(struct lcd_device *ld, int power)
+{
+ int ret = -EINVAL;
+ struct jbt_info *jbt = dev_get_drvdata(&ld->dev);
+
+ jbt->blank_mode = power;
+ cancel_rearming_delayed_work(&jbt->blank_work);
+
+ switch (power) {
+ case FB_BLANK_UNBLANK:
+ dev_dbg(&jbt->spi->dev, "unblank\n");
+ mdelay(20);
+ ret = jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_NORMAL);
+ break;
+ case FB_BLANK_NORMAL:
+ dev_dbg(&jbt->spi->dev, "blank\n");
+ ret = schedule_delayed_work(&jbt->blank_work, HZ);
+ break;
+ case FB_BLANK_POWERDOWN:
+ dev_dbg(&jbt->spi->dev, "powerdown\n");
+ ret = schedule_delayed_work(&jbt->blank_work, HZ);
+ break;
+ default:
+ break;
+ }
+
+ return ret;
+}
+
+static int jbt6k74_get_power(struct lcd_device *ld)
+{
+ struct jbt_info *jbt = dev_get_drvdata(&ld->dev);
+
+ switch (jbt->power_mode) {
+ case JBT_POWER_MODE_NORMAL:
+ return FB_BLANK_UNBLANK;
+ case JBT_POWER_MODE_SLEEP:
+ return FB_BLANK_NORMAL;
+ default:
+ return JBT_POWER_MODE_DEEP_STANDBY;
+ }
+}
+
+struct lcd_ops jbt6k74_lcd_ops = {
+ .set_power = jbt6k74_set_power,
+ .get_power = jbt6k74_get_power,
+ .set_mode = jbt6k74_set_mode,
+};
+
+/* linux device model infrastructure */
+
+static int __devinit jbt_probe(struct spi_device *spi)
+{
+ int ret;
+ struct jbt_info *jbt;
+ struct jbt6k74_platform_data *pdata = spi->dev.platform_data;
+
+ /* the controller doesn't have a MISO pin; we can't do detection */
+
+ spi->mode = SPI_CPOL | SPI_CPHA;
+ spi->bits_per_word = 9;
+
+ ret = spi_setup(spi);
+ if (ret < 0) {
+ dev_err(&spi->dev,
+ "Failed to setup spi\n");
+ return ret;
+ }
+
+ jbt = kzalloc(sizeof(*jbt), GFP_KERNEL);
+ if (!jbt)
+ return -ENOMEM;
+
+ jbt->spi = spi;
+
+ jbt->lcd_dev = lcd_device_register("jbt6k74-lcd", &spi->dev, jbt,
+ &jbt6k74_lcd_ops);
+
+ if (IS_ERR(jbt->lcd_dev)) {
+ ret = PTR_ERR(jbt->lcd_dev);
+ goto err_free_drvdata;
+ }
+
+ INIT_DELAYED_WORK(&jbt->blank_work, jbt_blank_worker);
+
+ jbt->resolution = JBT_RESOLUTION_VGA;
+ jbt->power_mode = JBT_POWER_MODE_DEEP_STANDBY;
+ jbt->next_sleep = jiffies + msecs_to_jiffies(120);
+ mutex_init(&jbt->lock);
+
+ dev_set_drvdata(&spi->dev, jbt);
+
+ jbt->supplies[0].supply = "VDC";
+ jbt->supplies[1].supply = "VDDIO";
+
+ ret = regulator_bulk_get(&spi->dev, ARRAY_SIZE(jbt->supplies),
+ jbt->supplies);
+ if (ret) {
+ dev_err(&spi->dev, "Failed to power get supplies: %d\n", ret);
+ goto err_unregister_lcd;
+ }
+
+ if (gpio_is_valid(pdata->gpio_reset)) {
+ ret = gpio_request(pdata->gpio_reset, "jbt6k74 reset");
+ if (ret) {
+ dev_err(&spi->dev, "Failed to request reset gpio: %d\n",
+ ret);
+ goto err_free_supplies;
+ }
+
+ ret = gpio_direction_output(pdata->gpio_reset, 1);
+ if (ret) {
+ dev_err(&spi->dev, "Failed to set reset gpio direction: %d\n",
+ ret);
+ goto err_gpio_free;
+ }
+ }
+
+ ret = sysfs_create_group(&spi->dev.kobj, &jbt_attr_group);
+ if (ret < 0) {
+ dev_err(&spi->dev, "cannot create sysfs group\n");
+ goto err_gpio_free;
+ }
+
+ mdelay(50);
+ ret = jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_NORMAL);
+ if (ret < 0) {
+ dev_err(&spi->dev, "cannot enter NORMAL state\n");
+ goto err_sysfs_remove;
+ }
+
+
+ if (pdata->probe_completed)
+ (pdata->probe_completed)(&spi->dev);
+
+ return 0;
+
+err_sysfs_remove:
+ sysfs_remove_group(&spi->dev.kobj, &jbt_attr_group);
+err_gpio_free:
+ gpio_free(pdata->gpio_reset);
+err_free_supplies:
+ regulator_bulk_free(ARRAY_SIZE(jbt->supplies), jbt->supplies);
+err_unregister_lcd:
+ lcd_device_unregister(jbt->lcd_dev);
+err_free_drvdata:
+ dev_set_drvdata(&spi->dev, NULL);
+ kfree(jbt);
+
+ return ret;
+}
+
+static int __devexit jbt_remove(struct spi_device *spi)
+{
+ struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
+ struct jbt6k74_platform_data *pdata = jbt->spi->dev.platform_data;
+
+ /* We don't want to switch off the display in case the user
+ * accidentially unloads the module (whose use count normally is 0) */
+ jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_NORMAL);
+
+ sysfs_remove_group(&spi->dev.kobj, &jbt_attr_group);
+
+ if (gpio_is_valid(pdata->gpio_reset))
+ gpio_free(pdata->gpio_reset);
+
+ lcd_device_unregister(jbt->lcd_dev);
+
+ dev_set_drvdata(&spi->dev, NULL);
+
+ regulator_bulk_free(ARRAY_SIZE(jbt->supplies), jbt->supplies);
+ kfree(jbt);
+
+ return 0;
+}
+
+#ifdef CONFIG_PM
+static int jbt_suspend(struct spi_device *spi, pm_message_t state)
+{
+ struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
+
+ jbt->suspend_mode = jbt->power_mode;
+
+ jbt6k74_enter_power_mode(jbt, JBT_POWER_MODE_DEEP_STANDBY);
+ jbt->suspended = 1;
+
+ dev_info(&spi->dev, "suspended\n");
+
+ return 0;
+}
+
+int jbt6k74_resume(struct spi_device *spi)
+{
+ struct jbt_info *jbt = dev_get_drvdata(&spi->dev);
+ dev_info(&spi->dev, "starting resume: %d\n", jbt->suspend_mode);
+
+ mdelay(20);
+
+ jbt->suspended = 0;
+ jbt6k74_enter_power_mode(jbt, jbt->suspend_mode);
+
+ dev_info(&spi->dev, "resumed: %d\n", jbt->suspend_mode);
+
+ return 0;
+}
+EXPORT_SYMBOL_GPL(jbt6k74_resume);
+
+#else
+#define jbt_suspend NULL
+#define jbt6k74_resume NULL
+#endif
+
+static struct spi_driver jbt6k74_driver = {
+ .driver = {
+ .name = "jbt6k74",
+ .owner = THIS_MODULE,
+ },
+
+ .probe = jbt_probe,
+ .remove = __devexit_p(jbt_remove),
+ .suspend = jbt_suspend,
+ .resume = jbt6k74_resume,
+};
+
+static int __init jbt_init(void)
+{
+ return spi_register_driver(&jbt6k74_driver);
+}
+module_init(jbt_init);
+
+static void __exit jbt_exit(void)
+{
+ spi_unregister_driver(&jbt6k74_driver);
+}
+module_exit(jbt_exit);
+
+MODULE_DESCRIPTION("SPI driver for tpo JBT6K74-AS LCM control interface");
+MODULE_AUTHOR("Harald Welte <laforge@openmoko.org>");
+MODULE_LICENSE("GPL");
diff --git a/drivers/video/backlight/pcf50633-backlight.c b/drivers/video/backlight/pcf50633-backlight.c
new file mode 100644
index 00000000000..10b9c31bc43
--- /dev/null
+++ b/drivers/video/backlight/pcf50633-backlight.c
@@ -0,0 +1,185 @@
+/*
+ * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
+ * PCF50633 backlight device driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/platform_device.h>
+#include <linux/fb.h>
+#include <linux/backlight.h>
+#include <linux/mfd/pcf50633/core.h>
+#include <linux/mfd/pcf50633/backlight.h>
+
+struct pcf50633_bl {
+ struct pcf50633 *pcf;
+ struct backlight_device *bl;
+
+ unsigned int brightness;
+ unsigned int brightness_limit;
+};
+
+/*
+ * pcf50633_bl_set_brightness_limit
+ *
+ * Update the brightness limit for the pc50633 backlight. The actuall brightness
+ * will not go above the limit. This is useful to limit power drain for example
+ * on low battery.
+ *
+ * @dev: Pointer to a pcf50633 device
+ * @limit: The brightness limit. Valid values are 0-63
+ */
+int pcf50633_bl_set_brightness_limit(struct pcf50633 *pcf, unsigned int limit)
+{
+ struct pcf50633_bl *pcf_bl = platform_get_drvdata(pcf->bl_pdev);
+
+ if (!pcf_bl)
+ return -ENODEV;
+
+ pcf_bl->brightness_limit = limit & 0x3f;
+ backlight_update_status(pcf_bl->bl);
+
+ return 0;
+}
+
+static int pcf50633_bl_update_status(struct backlight_device *bl)
+{
+ struct pcf50633_bl *pcf_bl = bl_get_data(bl);
+ unsigned int new_brightness;
+
+
+ if (bl->props.state & (BL_CORE_SUSPENDED | BL_CORE_FBBLANK) ||
+ bl->props.power != FB_BLANK_UNBLANK)
+ new_brightness = 0;
+ else if (bl->props.brightness < pcf_bl->brightness_limit)
+ new_brightness = bl->props.brightness;
+ else
+ new_brightness = pcf_bl->brightness_limit;
+
+
+ if (pcf_bl->brightness == new_brightness)
+ return 0;
+
+ if (new_brightness) {
+ pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDOUT,
+ new_brightness);
+ if (!pcf_bl->brightness)
+ pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDENA, 1);
+ } else {
+ pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDENA, 0);
+ }
+
+ pcf_bl->brightness = new_brightness;
+
+ return 0;
+}
+
+static int pcf50633_bl_get_brightness(struct backlight_device *bl)
+{
+ struct pcf50633_bl *pcf_bl = bl_get_data(bl);
+ return pcf_bl->brightness;
+}
+
+static struct backlight_ops pcf50633_bl_ops = {
+ .get_brightness = pcf50633_bl_get_brightness,
+ .update_status = pcf50633_bl_update_status,
+ .options = BL_CORE_SUSPENDRESUME,
+};
+
+static int __devinit pcf50633_bl_probe(struct platform_device *pdev)
+{
+ int ret;
+ struct pcf50633_bl *pcf_bl;
+ struct pcf50633_platform_data *pcf50633_data = pdev->dev.parent->platform_data;
+ struct pcf50633_bl_platform_data *pdata = pcf50633_data->backlight_data;
+
+ pcf_bl = kzalloc(sizeof(*pcf_bl), GFP_KERNEL);
+ if (!pcf_bl)
+ return -ENOMEM;
+
+ pcf_bl->pcf = dev_to_pcf50633(pdev->dev.parent);
+
+ pcf_bl->bl = backlight_device_register(pdev->name, &pdev->dev, pcf_bl,
+ &pcf50633_bl_ops);
+
+ if (IS_ERR(pcf_bl->bl)) {
+ ret = PTR_ERR(pcf_bl->bl);
+ goto err_free;
+ }
+
+ platform_set_drvdata(pdev, pcf_bl);
+
+ pcf_bl->bl->props.max_brightness = 0x3f;
+ pcf_bl->bl->props.power = FB_BLANK_UNBLANK;
+
+ if (pdata) {
+ pcf_bl->bl->props.brightness = pdata->default_brightness;
+ pcf_bl->brightness_limit = pdata->default_brightness_limit;
+ } else {
+ pcf_bl->bl->props.brightness = 0x3f;
+ pcf_bl->brightness_limit = 0x3f;
+ }
+
+ pcf50633_reg_write(pcf_bl->pcf, PCF50633_REG_LEDDIM, pdata->ramp_time);
+
+ /* Should be different from props.brightness, so we don't
+ * update_status early the first time it's called */
+ pcf_bl->brightness = pcf_bl->bl->props.brightness + 1;
+
+ backlight_update_status(pcf_bl->bl);
+
+ return 0;
+
+err_free:
+ kfree(pcf_bl);
+
+ return ret;
+}
+
+static int __devexit pcf50633_bl_remove(struct platform_device *pdev)
+{
+ struct pcf50633_bl *pcf_bl = platform_get_drvdata(pdev);
+
+ backlight_device_unregister(pcf_bl->bl);
+
+ platform_set_drvdata(pdev, NULL);
+
+ kfree(pcf_bl);
+
+ return 0;
+}
+
+static struct platform_driver pcf50633_bl_driver = {
+ .probe = pcf50633_bl_probe,
+ .remove = __devexit_p(pcf50633_bl_remove),
+ .driver = {
+ .name = "pcf50633-backlight",
+ },
+};
+
+static int __init pcf50633_bl_init(void)
+{
+ return platform_driver_register(&pcf50633_bl_driver);
+}
+module_init(pcf50633_bl_init);
+
+static void __exit pcf50633_bl_exit(void)
+{
+ platform_driver_unregister(&pcf50633_bl_driver);
+}
+module_exit(pcf50633_bl_exit);
+
+MODULE_AUTHOR("Lars-Peter Clausen <lars@metafoo.de>");
+MODULE_DESCRIPTION("PCF50633 backlight driver");
+MODULE_LICENSE("GPL");
+MODULE_ALIAS("platform:pcf50633-backlight");
diff --git a/include/linux/bq27000_battery.h b/include/linux/bq27000_battery.h
new file mode 100644
index 00000000000..a617466a517
--- /dev/null
+++ b/include/linux/bq27000_battery.h
@@ -0,0 +1,16 @@
+#ifndef __BQ27000_BATTERY_H__
+#define __BQ27000_BATTERY_H__
+
+void bq27000_charging_state_change(struct platform_device *pdev);
+
+struct bq27000_platform_data {
+ const char *name;
+ int rsense_mohms;
+ int (*hdq_read)(int);
+ int (*hdq_write)(int, u8);
+ int (*hdq_initialized)(void);
+ int (*get_charger_online_status)(void);
+ int (*get_charger_active_status)(void);
+};
+
+#endif
diff --git a/include/linux/fb.h b/include/linux/fb.h
index de9c722e7b9..f62332e36df 100644
--- a/include/linux/fb.h
+++ b/include/linux/fb.h
@@ -134,6 +134,7 @@ struct dentry;
#define FB_ACCEL_NEOMAGIC_NM2360 97 /* NeoMagic NM2360 */
#define FB_ACCEL_NEOMAGIC_NM2380 98 /* NeoMagic NM2380 */
#define FB_ACCEL_PXA3XX 99 /* PXA3xx */
+#define FB_ACCEL_GLAMO 100 /* Smedia Glamo 3362 */
#define FB_ACCEL_SAVAGE4 0x80 /* S3 Savage4 */
#define FB_ACCEL_SAVAGE3D 0x81 /* S3 Savage3D */
diff --git a/include/linux/glamofb.h b/include/linux/glamofb.h
new file mode 100644
index 00000000000..5f9fab5a487
--- /dev/null
+++ b/include/linux/glamofb.h
@@ -0,0 +1,35 @@
+#ifndef _LINUX_GLAMOFB_H
+#define _LINUX_GLAMOFB_H
+
+#include <linux/fb.h>
+
+#ifdef __KERNEL__
+
+struct glamo_core;
+struct glamofb_handle;
+
+struct glamo_fb_platform_data {
+ int width, height;
+
+ int num_modes;
+ struct fb_videomode *modes;
+
+ struct glamo_core *core;
+};
+
+int glamofb_cmd_mode(struct glamofb_handle *gfb, int on);
+int glamofb_cmd_write(struct glamofb_handle *gfb, u_int16_t val);
+
+#ifdef CONFIG_MFD_GLAMO
+void glamo_lcm_reset(struct platform_device *pdev, int level);
+#else
+#define glamo_lcm_reset(...) do {} while (0)
+#endif
+
+#endif
+
+#define GLAMOFB_ENGINE_ENABLE _IOW('F', 0x1, __u32)
+#define GLAMOFB_ENGINE_DISABLE _IOW('F', 0x2, __u32)
+#define GLAMOFB_ENGINE_RESET _IOW('F', 0x3, __u32)
+
+#endif
diff --git a/include/linux/hdq.h b/include/linux/hdq.h
new file mode 100644
index 00000000000..377ab387eb3
--- /dev/null
+++ b/include/linux/hdq.h
@@ -0,0 +1,32 @@
+#ifndef __LINUX_HDQ_H__
+#define __LINUX_HDQ_H__
+
+#include <linux/device.h>
+
+#define HDQ_SAMPLE_PERIOD_US 10
+
+/* platform data */
+
+struct hdq_platform_data {
+ /*
+ * give an opportunity to use us as parent for
+ * devices that depend on us
+ */
+ void (*attach_child_devices)(struct device *parent_device);
+
+ void (*gpio_dir_out)(void);
+ void (*gpio_dir_in)(void);
+ void (*gpio_set)(int);
+ int (*gpio_get)(void);
+
+ int (*enable_fiq)(void);
+ void (*disable_fiq)(void);
+ void (*kick_fiq)(void);
+
+};
+
+int hdq_read(int address);
+int hdq_write(int address, u8 data);
+int hdq_initialized(void);
+
+#endif
diff --git a/include/linux/input/touchscreen/ts_filter.h b/include/linux/input/touchscreen/ts_filter.h
new file mode 100644
index 00000000000..632e5fb3f4e
--- /dev/null
+++ b/include/linux/input/touchscreen/ts_filter.h
@@ -0,0 +1,74 @@
+#ifndef __TS_FILTER_H__
+#define __TS_FILTER_H__
+
+/*
+ * Touchscreen filter.
+ *
+ * (c) 2008,2009 Andy Green <andy@warmcat.com>
+ */
+
+#include <linux/platform_device.h>
+
+#define MAX_TS_FILTER_COORDS 3 /* X, Y and Z (pressure). */
+
+struct ts_filter;
+struct ts_filter_configuration;
+
+/* Operations that a filter can perform. */
+
+struct ts_filter_api {
+ /* Create the filter - mandatory. */
+ struct ts_filter * (*create)(
+ struct platform_device *pdev,
+ const struct ts_filter_configuration *config,
+ int count_coords);
+ /* Destroy the filter - mandatory. */
+ void (*destroy)(struct ts_filter *filter);
+ /* Clear the filter - optional. */
+ void (*clear)(struct ts_filter *filter);
+
+
+ /*
+ * The next three API functions only make sense if all of them are
+ * set for a filter. If a filter has the next three methods then
+ * it can propagate coordinates in the chain.
+ */
+
+ /*
+ * Process the filter.
+ * It returns non-zero if the filter reaches an error.
+ */
+ int (*process)(struct ts_filter *filter, int *coords);
+ /*
+ * Is the filter ready to return a point?
+ * Please do not code side effects in this function.
+ */
+ int (*haspoint)(struct ts_filter *filter);
+ /*
+ * Get a point.
+ * Do not call unless the filter actually has a point to deliver.
+ */
+ void (*getpoint)(struct ts_filter *filter, int *coords);
+
+ /*
+ * Scale the points - optional.
+ * A filter could only scale coordinates.
+ */
+ void (*scale)(struct ts_filter *filter, int *coords);
+};
+
+/*
+ * Generic filter configuration. Actual configurations have this structure
+ * as a member.
+ */
+struct ts_filter_configuration {
+};
+
+struct ts_filter {
+ /* Operations for this filter. */
+ const struct ts_filter_api *api;
+ /* Number of coordinates to process. */
+ int count_coords;
+};
+
+#endif
diff --git a/include/linux/input/touchscreen/ts_filter_chain.h b/include/linux/input/touchscreen/ts_filter_chain.h
new file mode 100644
index 00000000000..a021ba25bd4
--- /dev/null
+++ b/include/linux/input/touchscreen/ts_filter_chain.h
@@ -0,0 +1,58 @@
+#ifndef __TS_FILTER_CHAIN_H__
+#define __TS_FILTER_CHAIN_H__
+
+/*
+ * Touchscreen filter chains.
+ *
+ * (c) 2008,2009 Andy Green <andy@warmcat.com>
+ */
+
+#include <linux/input/touchscreen/ts_filter.h>
+
+#include <linux/err.h>
+
+struct ts_filter_chain_configuration {
+ /* API to use. */
+ const struct ts_filter_api *api;
+ /* Generic filter configuration. Different for each filter. */
+ const struct ts_filter_configuration *config;
+};
+
+struct ts_filter_chain;
+
+#ifdef CONFIG_TOUCHSCREEN_FILTER
+
+/*
+ * Create a filter chain. It will allocate an array of
+ * null-terminated pointers to filters. On error it will return
+ * an error you can check with IS_ERR.
+ */
+extern struct ts_filter_chain *ts_filter_chain_create(
+ struct platform_device *pdev,
+ const struct ts_filter_chain_configuration conf[],
+ int count_coords);
+
+/* Destroy the chain. */
+extern void ts_filter_chain_destroy(struct ts_filter_chain *c);
+
+/* Clear the filter chain. */
+extern void ts_filter_chain_clear(struct ts_filter_chain *c);
+
+/*
+ * Try to get one point. Returns 0 if no points are available.
+ * coords will be used as temporal space, thus you supply a point
+ * using coords but you shouldn't rely on its value on return unless
+ * it returns a nonzero value that is not -1.
+ * If one of the filters find an error then this function will
+ * return -1.
+ */
+int ts_filter_chain_feed(struct ts_filter_chain *c, int *coords);
+
+#else /* !CONFIG_TOUCHSCREEN_FILTER */
+#define ts_filter_chain_create(pdev, config, count_coords) (NULL)
+#define ts_filter_chain_destroy(c) do { } while (0)
+#define ts_filter_chain_clear(c) do { } while (0)
+#define ts_filter_chain_feed(c, coords) (1)
+#endif
+
+#endif
diff --git a/include/linux/input/touchscreen/ts_filter_group.h b/include/linux/input/touchscreen/ts_filter_group.h
new file mode 100644
index 00000000000..2d727f30086
--- /dev/null
+++ b/include/linux/input/touchscreen/ts_filter_group.h
@@ -0,0 +1,36 @@
+#ifndef __TS_FILTER_GROUP_H__
+#define __TS_FILTER_GROUP_H__
+
+#include <linux/input/touchscreen/ts_filter.h>
+
+/*
+ * Touchscreen group filter.
+ *
+ * Copyright (C) 2008,2009 by Openmoko, Inc.
+ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
+ *
+ */
+
+struct ts_filter_group_configuration {
+ /* Size of the filter. */
+ int length;
+ /*
+ * If two points are separated by this distance or less they
+ * are considered to be members of the same group.
+ */
+ int close_enough;
+ /* Minimum allowed size for the biggest group in the sample set. */
+ int threshold;
+ /*
+ * Number of times we try to get a group of points with at least
+ * threshold points.
+ */
+ int attempts;
+
+ /* Generic filter configuration. */
+ struct ts_filter_configuration config;
+};
+
+extern const struct ts_filter_api ts_filter_group_api;
+
+#endif
diff --git a/include/linux/input/touchscreen/ts_filter_linear.h b/include/linux/input/touchscreen/ts_filter_linear.h
new file mode 100644
index 00000000000..6f5e8307456
--- /dev/null
+++ b/include/linux/input/touchscreen/ts_filter_linear.h
@@ -0,0 +1,31 @@
+#ifndef __TS_FILTER_LINEAR_H__
+#define __TS_FILTER_LINEAR_H__
+
+#include <linux/input/touchscreen/ts_filter.h>
+#include <linux/kobject.h>
+
+/*
+ * Touchscreen linear filter.
+ *
+ * Copyright (C) 2008,2009 by Openmoko, Inc.
+ * Author: Nelson Castillo <arhuaco@freaks-unidos.net>
+ *
+ */
+
+#define TS_FILTER_LINEAR_NCONSTANTS 7
+
+struct ts_filter_linear_configuration {
+ /* Calibration constants. */
+ int constants[TS_FILTER_LINEAR_NCONSTANTS];
+ /* First coordinate. */
+ int coord0;
+ /* Second coordinate. */
+ int coord1;
+
+ /* Generic filter configuration. */
+ struct ts_filter_configuration config;
+};
+
+extern const struct ts_filter_api ts_filter_linear_api;
+
+#endif
diff --git a/include/linux/input/touchscreen/ts_filter_mean.h b/include/linux/input/touchscreen/ts_filter_mean.h
new file mode 100644
index 00000000000..d4870413987
--- /dev/null
+++ b/include/linux/input/touchscreen/ts_filter_mean.h
@@ -0,0 +1,28 @@
+#ifndef __TS_FILTER_MEAN_H__
+#define __TS_FILTER_MEAN_H__
+
+#include <linux/input/touchscreen/ts_filter.h>
+
+/*
+ * Touchscreen filter.
+ *
+ * mean
+ *
+ * (c) 2008,2009
+ * Andy Green <andy@warmcat.com>
+ * Nelson Castillo <arhuaco@freaks-unidos.net>
+ */
+
+/* Configuration for this filter. */
+struct ts_filter_mean_configuration {
+ /* Number of points for the mean. */
+ int length;
+
+ /* Generic filter configuration. */
+ struct ts_filter_configuration config;
+};
+
+/* API functions for the mean filter */
+extern const struct ts_filter_api ts_filter_mean_api;
+
+#endif /* __TS_FILTER_MEAN_H__ */
diff --git a/include/linux/input/touchscreen/ts_filter_median.h b/include/linux/input/touchscreen/ts_filter_median.h
new file mode 100644
index 00000000000..08051619531
--- /dev/null
+++ b/include/linux/input/touchscreen/ts_filter_median.h
@@ -0,0 +1,32 @@
+#ifndef __TS_FILTER_MEDIAN_H__
+#define __TS_FILTER_MEDIAN_H__
+
+#include <linux/input/touchscreen/ts_filter.h>
+
+/*
+ * Touchscreen filter.
+ *
+ * median
+ *
+ * (c) 2008 Andy Green <andy@warmcat.com>
+ */
+
+struct ts_filter_median_configuration {
+ /* Size of the filter. */
+ int extent;
+ /* Precomputed midpoint. */
+ int midpoint;
+ /* A reference value for us to check if we are going fast or slow. */
+ int decimation_threshold;
+ /* How many points to replace if we're going fast. */
+ int decimation_above;
+ /* How many points to replace if we're going slow. */
+ int decimation_below;
+
+ /* Generic configuration. */
+ struct ts_filter_configuration config;
+};
+
+extern const struct ts_filter_api ts_filter_median_api;
+
+#endif
diff --git a/include/linux/jbt6k74.h b/include/linux/jbt6k74.h
new file mode 100644
index 00000000000..75488c41136
--- /dev/null
+++ b/include/linux/jbt6k74.h
@@ -0,0 +1,21 @@
+#ifndef __JBT6K74_H__
+#define __JBT6K74_H__
+
+#include <linux/spi/spi.h>
+
+/*
+ * struct jbt6k74_platform_data - Platform data for jbt6k74 driver
+ * @probe_completed: Callback to be called when the driver has been
+ * successfully probed.
+ * @enable_pixel_clock: Callback to enable or disable the pixelclock of the
+ * gpu.
+ * @gpio_reset: Reset gpio pin number.
+ */
+struct jbt6k74_platform_data {
+ void (*probe_completed)(struct device *dev);
+ void (*enable_pixel_clock)(struct device *dev, int enable);
+
+ int gpio_reset;
+};
+
+#endif
diff --git a/include/linux/mfd/glamo.h b/include/linux/mfd/glamo.h
new file mode 100644
index 00000000000..529d4f07f03
--- /dev/null
+++ b/include/linux/mfd/glamo.h
@@ -0,0 +1,52 @@
+#ifndef __GLAMO_MFD_H
+#define __GLAMO_MFD_H
+
+struct glamo_core;
+struct glamo_spigpio_platform_data;
+struct glamo_fb_platform_data;
+
+struct glamo_mmc_platform_data {
+ int (*glamo_mmc_use_slow)(void);
+
+ struct glamo_core *core;
+};
+
+struct glamo_gpio_platform_data {
+ int base;
+ void (*registered)(struct device *dev);
+};
+
+struct glamo_platform_data {
+ struct glamo_fb_platform_data *fb_data;
+ struct glamo_mmc_platform_data *mmc_data;
+ struct glamo_gpio_platform_data *gpio_data;
+
+ unsigned int osci_clock_rate;
+
+ void (*glamo_external_reset)(int);
+};
+
+enum glamo_engine {
+ GLAMO_ENGINE_CAPTURE = 0,
+ GLAMO_ENGINE_ISP = 1,
+ GLAMO_ENGINE_JPEG = 2,
+ GLAMO_ENGINE_MPEG_ENC = 3,
+ GLAMO_ENGINE_MPEG_DEC = 4,
+ GLAMO_ENGINE_LCD = 5,
+ GLAMO_ENGINE_CMDQ = 6,
+ GLAMO_ENGINE_2D = 7,
+ GLAMO_ENGINE_3D = 8,
+ GLAMO_ENGINE_MMC = 9,
+ GLAMO_ENGINE_MICROP0 = 10,
+ GLAMO_ENGINE_RISC = 11,
+ GLAMO_ENGINE_MICROP1_MPEG_ENC = 12,
+ GLAMO_ENGINE_MICROP1_MPEG_DEC = 13,
+#if 0
+ GLAMO_ENGINE_H264_DEC = 14,
+ GLAMO_ENGINE_RISC1 = 15,
+ GLAMO_ENGINE_SPI = 16,
+#endif
+ __NUM_GLAMO_ENGINES
+};
+
+#endif
diff --git a/include/linux/mfd/pcf50633/backlight.h b/include/linux/mfd/pcf50633/backlight.h
new file mode 100644
index 00000000000..9d3646af056
--- /dev/null
+++ b/include/linux/mfd/pcf50633/backlight.h
@@ -0,0 +1,44 @@
+/*
+ * Copyright (C) 2009, Lars-Peter Clausen <lars@metafoo.de>
+ * PCF50633 backlight device driver
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+#ifndef __LINUX_MFD_PCF50633_BACKLIGHT
+#define __LINUX_MFD_PCF50633_BACKLIGHT
+
+/*
+* @default_brightness: Brightness to be used after the driver has been
+ probed. Valid range 0-63.
+* @default_brightness_limit: Brightness limit to be used after the driver has
+* been probed. This is usfull when it is not known
+* how much power is available for the backlight
+* during probe. Valid range 0-63
+* @ramp_time: When changing the backlights brightness the change
+* is not instant, instead it fades smooth from one
+* state to another. This value specifies how long the
+* fade should take. The lower the value the higher
+* the fade time. Valid range 0-255
+*/
+struct pcf50633_bl_platform_data {
+ unsigned int default_brightness;
+ unsigned int default_brightness_limit;
+ uint8_t ramp_time;
+};
+
+
+struct pcf50633;
+
+int pcf50633_bl_set_brightness_limit(struct pcf50633 *pcf, unsigned int limit);
+
+#endif
+
diff --git a/include/linux/mfd/pcf50633/core.h b/include/linux/mfd/pcf50633/core.h
index 9aba7b779fb..42f9af553ed 100644
--- a/include/linux/mfd/pcf50633/core.h
+++ b/include/linux/mfd/pcf50633/core.h
@@ -18,6 +18,7 @@
#include <linux/regulator/driver.h>
#include <linux/regulator/machine.h>
#include <linux/power_supply.h>
+#include <linux/mfd/pcf50633/backlight.h>
struct pcf50633;
@@ -29,7 +30,7 @@ struct pcf50633_platform_data {
char **batteries;
int num_batteries;
- int charging_restart_interval;
+ int chg_ref_current_ma;
/* Callbacks */
void (*probe_done)(struct pcf50633 *);
@@ -38,10 +39,8 @@ struct pcf50633_platform_data {
void (*force_shutdown)(struct pcf50633 *);
u8 resumers[5];
-};
-struct pcf50633_subdev_pdata {
- struct pcf50633 *pcf;
+ struct pcf50633_bl_platform_data *backlight_data;
};
struct pcf50633_irq {
@@ -151,6 +150,7 @@ struct pcf50633 {
struct platform_device *mbc_pdev;
struct platform_device *adc_pdev;
struct platform_device *input_pdev;
+ struct platform_device *bl_pdev;
struct platform_device *regulator_pdev[PCF50633_NUM_REGULATORS];
};
@@ -217,5 +217,9 @@ enum pcf50633_reg_int5 {
#define PCF50633_REG_LEDCTL 0x2a
#define PCF50633_REG_LEDDIM 0x2b
-#endif
+static inline struct pcf50633 *dev_to_pcf50633(struct device *dev)
+{
+ return dev_get_drvdata(dev);
+}
+#endif
diff --git a/include/linux/mfd/pcf50633/mbc.h b/include/linux/mfd/pcf50633/mbc.h
index 4119579acf2..df4f5fa88de 100644
--- a/include/linux/mfd/pcf50633/mbc.h
+++ b/include/linux/mfd/pcf50633/mbc.h
@@ -128,6 +128,7 @@ enum pcf50633_reg_mbcs3 {
int pcf50633_mbc_usb_curlim_set(struct pcf50633 *pcf, int ma);
int pcf50633_mbc_get_status(struct pcf50633 *);
+int pcf50633_mbc_get_usb_online_status(struct pcf50633 *);
#endif
diff --git a/include/linux/platform_battery.h b/include/linux/platform_battery.h
new file mode 100644
index 00000000000..00f7651096a
--- /dev/null
+++ b/include/linux/platform_battery.h
@@ -0,0 +1,12 @@
+#ifndef __PLATFORM_BATTERY_H__
+#define __PLATFORM_BATTERY_H__
+
+struct platform_bat_platform_data {
+ const char *name;
+ int (**get_property)(void);
+ int (*is_present)(void);
+ enum power_supply_property *properties;
+ size_t num_properties;
+};
+
+#endif
diff --git a/sound/soc/s3c24xx/Kconfig b/sound/soc/s3c24xx/Kconfig
index 923428fc1ad..e8c13762a8f 100644
--- a/sound/soc/s3c24xx/Kconfig
+++ b/sound/soc/s3c24xx/Kconfig
@@ -31,22 +31,13 @@ config SND_S3C2443_SOC_AC97
select SND_SOC_AC97_BUS
config SND_S3C24XX_SOC_NEO1973_WM8753
- tristate "SoC I2S Audio support for NEO1973 - WM8753"
- depends on SND_S3C24XX_SOC && MACH_NEO1973_GTA01
+ tristate "Audio support for Openmoko Neo1973 Smartphones (GTA01/GTA02)"
+ depends on SND_S3C24XX_SOC && (MACH_NEO1973_GTA01 || MACH_NEO1973_GTA02)
select SND_S3C24XX_SOC_I2S
select SND_SOC_WM8753
help
- Say Y if you want to add support for SoC audio on smdk2440
- with the WM8753.
-
-config SND_S3C24XX_SOC_NEO1973_GTA02_WM8753
- tristate "Audio support for the Openmoko Neo FreeRunner (GTA02)"
- depends on SND_S3C24XX_SOC && MACH_NEO1973_GTA02
- select SND_S3C24XX_SOC_I2S
- select SND_SOC_WM8753
- help
- This driver provides audio support for the Openmoko Neo FreeRunner
- smartphone.
+ Say Y here to enable audio support for the Openmoko Neo1973
+ Smartphones.
config SND_S3C24XX_SOC_JIVE_WM8750
tristate "SoC I2S Audio support for Jive"
diff --git a/sound/soc/s3c24xx/Makefile b/sound/soc/s3c24xx/Makefile
index 99f5a7dd3fc..bcf1258a930 100644
--- a/sound/soc/s3c24xx/Makefile
+++ b/sound/soc/s3c24xx/Makefile
@@ -16,7 +16,6 @@ obj-$(CONFIG_SND_S3C_I2SV2_SOC) += snd-soc-s3c-i2s-v2.o
# S3C24XX Machine Support
snd-soc-jive-wm8750-objs := jive_wm8750.o
snd-soc-neo1973-wm8753-objs := neo1973_wm8753.o
-snd-soc-neo1973-gta02-wm8753-objs := neo1973_gta02_wm8753.o
snd-soc-smdk2443-wm9710-objs := smdk2443_wm9710.o
snd-soc-ln2440sbc-alc650-objs := ln2440sbc_alc650.o
snd-soc-s3c24xx-uda134x-objs := s3c24xx_uda134x.o
@@ -26,7 +25,6 @@ snd-soc-s3c24xx-simtec-tlv320aic23-objs := s3c24xx_simtec_tlv320aic23.o
obj-$(CONFIG_SND_S3C24XX_SOC_JIVE_WM8750) += snd-soc-jive-wm8750.o
obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_WM8753) += snd-soc-neo1973-wm8753.o
-obj-$(CONFIG_SND_S3C24XX_SOC_NEO1973_GTA02_WM8753) += snd-soc-neo1973-gta02-wm8753.o
obj-$(CONFIG_SND_S3C24XX_SOC_SMDK2443_WM9710) += snd-soc-smdk2443-wm9710.o
obj-$(CONFIG_SND_S3C24XX_SOC_LN2440SBC_ALC650) += snd-soc-ln2440sbc-alc650.o
obj-$(CONFIG_SND_S3C24XX_SOC_S3C24XX_UDA134X) += snd-soc-s3c24xx-uda134x.o
diff --git a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c b/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
deleted file mode 100644
index 0c52e36ddd8..00000000000
--- a/sound/soc/s3c24xx/neo1973_gta02_wm8753.c
+++ /dev/null
@@ -1,498 +0,0 @@
-/*
- * neo1973_gta02_wm8753.c -- SoC audio for Openmoko Freerunner(GTA02)
- *
- * Copyright 2007 Openmoko Inc
- * Author: Graeme Gregory <graeme@openmoko.org>
- * Copyright 2007 Wolfson Microelectronics PLC.
- * Author: Graeme Gregory <linux@wolfsonmicro.com>
- * Copyright 2009 Wolfson Microelectronics
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- */
-
-#include <linux/module.h>
-#include <linux/moduleparam.h>
-#include <linux/timer.h>
-#include <linux/interrupt.h>
-#include <linux/platform_device.h>
-#include <linux/gpio.h>
-#include <sound/core.h>
-#include <sound/pcm.h>
-#include <sound/soc.h>
-#include <sound/soc-dapm.h>
-
-#include <asm/mach-types.h>
-
-#include <plat/regs-iis.h>
-
-#include <mach/regs-clock.h>
-#include <asm/io.h>
-#include <mach/gta02.h>
-#include "../codecs/wm8753.h"
-#include "s3c24xx-pcm.h"
-#include "s3c24xx-i2s.h"
-
-static struct snd_soc_card neo1973_gta02;
-
-static int neo1973_gta02_hifi_hw_params(struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
- struct snd_soc_dai *cpu_dai = rtd->dai->cpu_dai;
- unsigned int pll_out = 0, bclk = 0;
- int ret = 0;
- unsigned long iis_clkrate;
-
- iis_clkrate = s3c24xx_i2s_get_clockrate();
-
- switch (params_rate(params)) {
- case 8000:
- case 16000:
- pll_out = 12288000;
- break;
- case 48000:
- bclk = WM8753_BCLK_DIV_4;
- pll_out = 12288000;
- break;
- case 96000:
- bclk = WM8753_BCLK_DIV_2;
- pll_out = 12288000;
- break;
- case 11025:
- bclk = WM8753_BCLK_DIV_16;
- pll_out = 11289600;
- break;
- case 22050:
- bclk = WM8753_BCLK_DIV_8;
- pll_out = 11289600;
- break;
- case 44100:
- bclk = WM8753_BCLK_DIV_4;
- pll_out = 11289600;
- break;
- case 88200:
- bclk = WM8753_BCLK_DIV_2;
- pll_out = 11289600;
- break;
- }
-
- /* set codec DAI configuration */
- ret = snd_soc_dai_set_fmt(codec_dai,
- SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0)
- return ret;
-
- /* set cpu DAI configuration */
- ret = snd_soc_dai_set_fmt(cpu_dai,
- SND_SOC_DAIFMT_I2S | SND_SOC_DAIFMT_NB_NF |
- SND_SOC_DAIFMT_CBM_CFM);
- if (ret < 0)
- return ret;
-
- /* set the codec system clock for DAC and ADC */
- ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_MCLK, pll_out,
- SND_SOC_CLOCK_IN);
- if (ret < 0)
- return ret;
-
- /* set MCLK division for sample rate */
- ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_MCLK,
- S3C2410_IISMOD_32FS);
- if (ret < 0)
- return ret;
-
- /* set codec BCLK division for sample rate */
- ret = snd_soc_dai_set_clkdiv(codec_dai,
- WM8753_BCLKDIV, bclk);
- if (ret < 0)
- return ret;
-
- /* set prescaler division for sample rate */
- ret = snd_soc_dai_set_clkdiv(cpu_dai, S3C24XX_DIV_PRESCALER,
- S3C24XX_PRESCALE(4, 4));
- if (ret < 0)
- return ret;
-
- /* codec PLL input is PCLK/4 */
- ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL1,
- iis_clkrate / 4, pll_out);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-static int neo1973_gta02_hifi_hw_free(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
-
- /* disable the PLL */
- return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0);
-}
-
-/*
- * Neo1973 WM8753 HiFi DAI opserations.
- */
-static struct snd_soc_ops neo1973_gta02_hifi_ops = {
- .hw_params = neo1973_gta02_hifi_hw_params,
- .hw_free = neo1973_gta02_hifi_hw_free,
-};
-
-static int neo1973_gta02_voice_hw_params(
- struct snd_pcm_substream *substream,
- struct snd_pcm_hw_params *params)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
- unsigned int pcmdiv = 0;
- int ret = 0;
- unsigned long iis_clkrate;
-
- iis_clkrate = s3c24xx_i2s_get_clockrate();
-
- if (params_rate(params) != 8000)
- return -EINVAL;
- if (params_channels(params) != 1)
- return -EINVAL;
-
- pcmdiv = WM8753_PCM_DIV_6; /* 2.048 MHz */
-
- /* todo: gg check mode (DSP_B) against CSR datasheet */
- /* set codec DAI configuration */
- ret = snd_soc_dai_set_fmt(codec_dai, SND_SOC_DAIFMT_DSP_B |
- SND_SOC_DAIFMT_NB_NF | SND_SOC_DAIFMT_CBS_CFS);
- if (ret < 0)
- return ret;
-
- /* set the codec system clock for DAC and ADC */
- ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK,
- 12288000, SND_SOC_CLOCK_IN);
- if (ret < 0)
- return ret;
-
- /* set codec PCM division for sample rate */
- ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV,
- pcmdiv);
- if (ret < 0)
- return ret;
-
- /* configue and enable PLL for 12.288MHz output */
- ret = snd_soc_dai_set_pll(codec_dai, WM8753_PLL2,
- iis_clkrate / 4, 12288000);
- if (ret < 0)
- return ret;
-
- return 0;
-}
-
-static int neo1973_gta02_voice_hw_free(struct snd_pcm_substream *substream)
-{
- struct snd_soc_pcm_runtime *rtd = substream->private_data;
- struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
-
- /* disable the PLL */
- return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0);
-}
-
-static struct snd_soc_ops neo1973_gta02_voice_ops = {
- .hw_params = neo1973_gta02_voice_hw_params,
- .hw_free = neo1973_gta02_voice_hw_free,
-};
-
-#define LM4853_AMP 1
-#define LM4853_SPK 2
-
-static u8 lm4853_state;
-
-/* This has no effect, it exists only to maintain compatibility with
- * existing ALSA state files.
- */
-static int lm4853_set_state(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- int val = ucontrol->value.integer.value[0];
-
- if (val)
- lm4853_state |= LM4853_AMP;
- else
- lm4853_state &= ~LM4853_AMP;
-
- return 0;
-}
-
-static int lm4853_get_state(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.integer.value[0] = lm4853_state & LM4853_AMP;
-
- return 0;
-}
-
-static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- int val = ucontrol->value.integer.value[0];
-
- if (val) {
- lm4853_state |= LM4853_SPK;
- gpio_set_value(GTA02_GPIO_HP_IN, 0);
- } else {
- lm4853_state &= ~LM4853_SPK;
- gpio_set_value(GTA02_GPIO_HP_IN, 1);
- }
-
- return 0;
-}
-
-static int lm4853_get_spk(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.integer.value[0] = (lm4853_state & LM4853_SPK) >> 1;
-
- return 0;
-}
-
-static int lm4853_event(struct snd_soc_dapm_widget *w,
- struct snd_kcontrol *k,
- int event)
-{
- gpio_set_value(GTA02_GPIO_AMP_SHUT, SND_SOC_DAPM_EVENT_OFF(value));
-
- return 0;
-}
-
-static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
- SND_SOC_DAPM_SPK("Stereo Out", lm4853_event),
- SND_SOC_DAPM_LINE("GSM Line Out", NULL),
- SND_SOC_DAPM_LINE("GSM Line In", NULL),
- SND_SOC_DAPM_MIC("Headset Mic", NULL),
- SND_SOC_DAPM_MIC("Handset Mic", NULL),
- SND_SOC_DAPM_SPK("Handset Spk", NULL),
-};
-
-
-/* example machine audio_mapnections */
-static const struct snd_soc_dapm_route audio_map[] = {
-
- /* Connections to the lm4853 amp */
- {"Stereo Out", NULL, "LOUT1"},
- {"Stereo Out", NULL, "ROUT1"},
-
- /* Connections to the GSM Module */
- {"GSM Line Out", NULL, "MONO1"},
- {"GSM Line Out", NULL, "MONO2"},
- {"RXP", NULL, "GSM Line In"},
- {"RXN", NULL, "GSM Line In"},
-
- /* Connections to Headset */
- {"MIC1", NULL, "Mic Bias"},
- {"Mic Bias", NULL, "Headset Mic"},
-
- /* Call Mic */
- {"MIC2", NULL, "Mic Bias"},
- {"MIC2N", NULL, "Mic Bias"},
- {"Mic Bias", NULL, "Handset Mic"},
-
- /* Call Speaker */
- {"Handset Spk", NULL, "LOUT2"},
- {"Handset Spk", NULL, "ROUT2"},
-
- /* Connect the ALC pins */
- {"ACIN", NULL, "ACOP"},
-};
-
-static const struct snd_kcontrol_new wm8753_neo1973_gta02_controls[] = {
- SOC_DAPM_PIN_SWITCH("Stereo Out"),
- SOC_DAPM_PIN_SWITCH("GSM Line Out"),
- SOC_DAPM_PIN_SWITCH("GSM Line In"),
- SOC_DAPM_PIN_SWITCH("Headset Mic"),
- SOC_DAPM_PIN_SWITCH("Handset Mic"),
- SOC_DAPM_PIN_SWITCH("Handset Spk"),
-
- /* This has no effect, it exists only to maintain compatibility with
- * existing ALSA state files.
- */
- SOC_SINGLE_EXT("Amp State Switch", 6, 0, 1, 0,
- lm4853_get_state,
- lm4853_set_state),
- SOC_SINGLE_EXT("Amp Spk Switch", 7, 0, 1, 0,
- lm4853_get_spk,
- lm4853_set_spk),
-};
-
-/*
- * This is an example machine initialisation for a wm8753 connected to a
- * neo1973 GTA02.
- */
-static int neo1973_gta02_wm8753_init(struct snd_soc_codec *codec)
-{
- int err;
-
- /* set up NC codec pins */
- snd_soc_dapm_nc_pin(codec, "OUT3");
- snd_soc_dapm_nc_pin(codec, "OUT4");
- snd_soc_dapm_nc_pin(codec, "LINE1");
- snd_soc_dapm_nc_pin(codec, "LINE2");
-
- /* Add neo1973 gta02 specific widgets */
- snd_soc_dapm_new_controls(codec, wm8753_dapm_widgets,
- ARRAY_SIZE(wm8753_dapm_widgets));
-
- /* add neo1973 gta02 specific controls */
- err = snd_soc_add_controls(codec, wm8753_neo1973_gta02_controls,
- ARRAY_SIZE(wm8753_neo1973_gta02_controls));
-
- if (err < 0)
- return err;
-
- /* set up neo1973 gta02 specific audio path audio_map */
- snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
-
- /* set endpoints to default off mode */
- snd_soc_dapm_disable_pin(codec, "Stereo Out");
- snd_soc_dapm_disable_pin(codec, "GSM Line Out");
- snd_soc_dapm_disable_pin(codec, "GSM Line In");
- snd_soc_dapm_disable_pin(codec, "Headset Mic");
- snd_soc_dapm_disable_pin(codec, "Handset Mic");
- snd_soc_dapm_disable_pin(codec, "Handset Spk");
-
- snd_soc_dapm_sync(codec);
-
- return 0;
-}
-
-/*
- * BT Codec DAI
- */
-static struct snd_soc_dai bt_dai = {
- .name = "Bluetooth",
- .id = 0,
- .playback = {
- .channels_min = 1,
- .channels_max = 1,
- .rates = SNDRV_PCM_RATE_8000,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,},
- .capture = {
- .channels_min = 1,
- .channels_max = 1,
- .rates = SNDRV_PCM_RATE_8000,
- .formats = SNDRV_PCM_FMTBIT_S16_LE,},
-};
-
-static struct snd_soc_dai_link neo1973_gta02_dai[] = {
-{ /* Hifi Playback - for similatious use with voice below */
- .name = "WM8753",
- .stream_name = "WM8753 HiFi",
- .cpu_dai = &s3c24xx_i2s_dai,
- .codec_dai = &wm8753_dai[WM8753_DAI_HIFI],
- .init = neo1973_gta02_wm8753_init,
- .ops = &neo1973_gta02_hifi_ops,
-},
-{ /* Voice via BT */
- .name = "Bluetooth",
- .stream_name = "Voice",
- .cpu_dai = &bt_dai,
- .codec_dai = &wm8753_dai[WM8753_DAI_VOICE],
- .ops = &neo1973_gta02_voice_ops,
-},
-};
-
-static struct snd_soc_card neo1973_gta02 = {
- .name = "neo1973-gta02",
- .platform = &s3c24xx_soc_platform,
- .dai_link = neo1973_gta02_dai,
- .num_links = ARRAY_SIZE(neo1973_gta02_dai),
-};
-
-static struct snd_soc_device neo1973_gta02_snd_devdata = {
- .card = &neo1973_gta02,
- .codec_dev = &soc_codec_dev_wm8753,
-};
-
-static struct platform_device *neo1973_gta02_snd_device;
-
-static int __init neo1973_gta02_init(void)
-{
- int ret;
-
- if (!machine_is_neo1973_gta02()) {
- printk(KERN_INFO
- "Only GTA02 is supported by this ASoC driver\n");
- return -ENODEV;
- }
-
- /* register bluetooth DAI here */
- ret = snd_soc_register_dai(&bt_dai);
- if (ret)
- return ret;
-
- neo1973_gta02_snd_device = platform_device_alloc("soc-audio", -1);
- if (!neo1973_gta02_snd_device)
- return -ENOMEM;
-
- platform_set_drvdata(neo1973_gta02_snd_device,
- &neo1973_gta02_snd_devdata);
- neo1973_gta02_snd_devdata.dev = &neo1973_gta02_snd_device->dev;
- ret = platform_device_add(neo1973_gta02_snd_device);
-
- if (ret) {
- platform_device_put(neo1973_gta02_snd_device);
- return ret;
- }
-
- /* Initialise GPIOs used by amp */
- ret = gpio_request(GTA02_GPIO_HP_IN, "GTA02_HP_IN");
- if (ret) {
- pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_HP_IN);
- goto err_unregister_device;
- }
-
- ret = gpio_direction_output(GTA02_GPIO_AMP_HP_IN, 1);
- if (ret) {
- pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_HP_IN);
- goto err_free_gpio_hp_in;
- }
-
- ret = gpio_request(GTA02_GPIO_AMP_SHUT, "GTA02_AMP_SHUT");
- if (ret) {
- pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_AMP_SHUT);
- goto err_free_gpio_hp_in;
- }
-
- ret = gpio_direction_output(GTA02_GPIO_AMP_SHUT, 1);
- if (ret) {
- pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_AMP_SHUT);
- goto err_free_gpio_amp_shut;
- }
-
- return 0;
-
-err_free_gpio_amp_shut:
- gpio_free(GTA02_GPIO_AMP_SHUT);
-err_free_gpio_hp_in:
- gpio_free(GTA02_GPIO_HP_IN);
-err_unregister_device:
- platform_device_unregister(neo1973_gta02_snd_device);
- return ret;
-}
-module_init(neo1973_gta02_init);
-
-static void __exit neo1973_gta02_exit(void)
-{
- snd_soc_unregister_dai(&bt_dai);
- platform_device_unregister(neo1973_gta02_snd_device);
- gpio_free(GTA02_GPIO_HP_IN);
- gpio_free(GTA02_GPIO_AMP_SHUT);
-}
-module_exit(neo1973_gta02_exit);
-
-/* Module information */
-MODULE_AUTHOR("Graeme Gregory, graeme@openmoko.org");
-MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973 GTA02");
-MODULE_LICENSE("GPL");
diff --git a/sound/soc/s3c24xx/neo1973_wm8753.c b/sound/soc/s3c24xx/neo1973_wm8753.c
index 906709e6dd5..5cc1ef2c8fe 100644
--- a/sound/soc/s3c24xx/neo1973_wm8753.c
+++ b/sound/soc/s3c24xx/neo1973_wm8753.c
@@ -1,15 +1,16 @@
/*
- * neo1973_wm8753.c -- SoC audio for Neo1973
+ * neo1973_gta02_wm8753.c -- SoC audio for Openmoko Freerunner(GTA02)
*
+ * Copyright 2007 Openmoko Inc
+ * Author: Graeme Gregory <graeme@openmoko.org>
* Copyright 2007 Wolfson Microelectronics PLC.
- * Author: Graeme Gregory
- * graeme.gregory@wolfsonmicro.com or linux@wolfsonmicro.com
+ * Author: Graeme Gregory <linux@wolfsonmicro.com>
+ * Copyright 2009 Wolfson Microelectronics
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License as published by the
* Free Software Foundation; either version 2 of the License, or (at your
* option) any later version.
- *
*/
#include <linux/module.h>
@@ -17,7 +18,7 @@
#include <linux/timer.h>
#include <linux/interrupt.h>
#include <linux/platform_device.h>
-#include <linux/i2c.h>
+#include <linux/gpio.h>
#include <sound/core.h>
#include <sound/pcm.h>
#include <sound/soc.h>
@@ -25,34 +26,161 @@
#include <sound/tlv.h>
#include <asm/mach-types.h>
-#include <asm/hardware/scoop.h>
-#include <mach/regs-clock.h>
-#include <mach/regs-gpio.h>
-#include <mach/hardware.h>
-#include <plat/audio.h>
-#include <linux/io.h>
-#include <mach/spi-gpio.h>
#include <plat/regs-iis.h>
+#include <mach/regs-clock.h>
+#include <mach/gta02.h>
#include "../codecs/wm8753.h"
-#include "lm4857.h"
#include "s3c24xx-pcm.h"
#include "s3c24xx-i2s.h"
-/* define the scenarios */
-#define NEO_AUDIO_OFF 0
-#define NEO_GSM_CALL_AUDIO_HANDSET 1
-#define NEO_GSM_CALL_AUDIO_HEADSET 2
-#define NEO_GSM_CALL_AUDIO_BLUETOOTH 3
-#define NEO_STEREO_TO_SPEAKERS 4
-#define NEO_STEREO_TO_HEADPHONES 5
-#define NEO_CAPTURE_HANDSET 6
-#define NEO_CAPTURE_HEADSET 7
-#define NEO_CAPTURE_BLUETOOTH 8
+#include "lm4857.h"
+#include <linux/i2c.h>
+
+#ifdef CONFIG_MACH_NEO1973_GTA01
+
+static struct lm4857 {
+ struct i2c_client *i2c;
+ uint8_t regs[4];
+ uint8_t state;
+} lm4857 = {
+ .regs = {0x00, 0x40, 0x80, 0xC0},
+};
+
+static void lm4857_write_regs(void)
+{
+ if (!lm4857.i2c)
+ return;
+
+ if (i2c_master_send(lm4857.i2c, lm4857.regs, 4) != 4)
+ printk(KERN_ERR "lm4857: i2c write failed\n");
+}
-static struct snd_soc_card neo1973;
-static struct i2c_client *i2c;
+static int lm4857_get_reg(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ int reg = mc->reg;
+ int shift = mc->shift;
+ int mask = mc->max;
+
+ ucontrol->value.integer.value[0] = (lm4857.regs[reg] >> shift) & mask;
+ return 0;
+}
+
+static int lm4857_set_reg(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ struct soc_mixer_control *mc =
+ (struct soc_mixer_control *)kcontrol->private_value;
+ int reg = mc->reg;
+ int shift = mc->shift;
+ int mask = mc->max;
+
+ if (((lm4857.regs[reg] >> shift) & mask) ==
+ ucontrol->value.integer.value[0])
+ return 0;
+
+ lm4857.regs[reg] &= ~(mask << shift);
+ lm4857.regs[reg] |= ucontrol->value.integer.value[0] << shift;
+ lm4857_write_regs();
+ return 1;
+}
+
+static int lm4857_get_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ uint8_t value = lm4857.regs[LM4857_CTRL] & 0x0F;
+
+ if (value)
+ value -= 5;
+
+ ucontrol->value.integer.value[0] = value;
+ return 0;
+}
+
+static int lm4857_set_mode(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ uint8_t value = ucontrol->value.integer.value[0];
+
+ if (value)
+ value += 5;
+
+ if ((lm4857.regs[LM4857_CTRL] & 0x0F) == value)
+ return 0;
+
+ lm4857.regs[LM4857_CTRL] &= 0xF0;
+ lm4857.regs[LM4857_CTRL] |= value;
+ lm4857_write_regs();
+ return 1;
+}
+
+static int lm4857_i2c_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ if (lm4857.i2c)
+ return -EBUSY;
+
+ lm4857.i2c = client;
+
+ lm4857_write_regs();
+ return 0;
+}
+
+static int lm4857_i2c_remove(struct i2c_client *client)
+{
+ lm4857.i2c = NULL;
+
+ return 0;
+}
+
+static int lm4857_suspend(struct i2c_client *dev, pm_message_t state)
+{
+ lm4857.state = lm4857.regs[LM4857_CTRL] & 0xf;
+ if (lm4857.state) {
+ lm4857.regs[LM4857_CTRL] &= 0xf0;
+ lm4857_write_regs();
+ }
+ return 0;
+}
+
+static int lm4857_resume(struct i2c_client *dev)
+{
+ if (lm4857.state) {
+ lm4857.regs[LM4857_CTRL] |= (lm4857.state & 0x0f);
+ lm4857_write_regs();
+ }
+ return 0;
+}
+
+static void lm4857_shutdown(struct i2c_client *dev)
+{
+ lm4857.regs[LM4857_CTRL] &= 0xf0;
+ lm4857_write_regs();
+}
+
+static const struct i2c_device_id lm4857_i2c_id[] = {
+ { "neo1973_lm4857", 0 },
+ { }
+};
+
+static struct i2c_driver lm4857_i2c_driver = {
+ .driver = {
+ .name = "LM4857 I2C Amp",
+ .owner = THIS_MODULE,
+ },
+ .suspend = lm4857_suspend,
+ .resume = lm4857_resume,
+ .shutdown = lm4857_shutdown,
+ .probe = lm4857_i2c_probe,
+ .remove = lm4857_i2c_remove,
+ .id_table = lm4857_i2c_id,
+};
+
+#endif
static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
@@ -64,8 +192,6 @@ static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream,
int ret = 0;
unsigned long iis_clkrate;
- pr_debug("Entered %s\n", __func__);
-
iis_clkrate = s3c24xx_i2s_get_clockrate();
switch (params_rate(params)) {
@@ -126,7 +252,8 @@ static int neo1973_hifi_hw_params(struct snd_pcm_substream *substream,
return ret;
/* set codec BCLK division for sample rate */
- ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_BCLKDIV, bclk);
+ ret = snd_soc_dai_set_clkdiv(codec_dai,
+ WM8753_BCLKDIV, bclk);
if (ret < 0)
return ret;
@@ -150,8 +277,6 @@ static int neo1973_hifi_hw_free(struct snd_pcm_substream *substream)
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
- pr_debug("Entered %s\n", __func__);
-
/* disable the PLL */
return snd_soc_dai_set_pll(codec_dai, WM8753_PLL1, 0, 0);
}
@@ -164,7 +289,8 @@ static struct snd_soc_ops neo1973_hifi_ops = {
.hw_free = neo1973_hifi_hw_free,
};
-static int neo1973_voice_hw_params(struct snd_pcm_substream *substream,
+static int neo1973_voice_hw_params(
+ struct snd_pcm_substream *substream,
struct snd_pcm_hw_params *params)
{
struct snd_soc_pcm_runtime *rtd = substream->private_data;
@@ -173,8 +299,6 @@ static int neo1973_voice_hw_params(struct snd_pcm_substream *substream,
int ret = 0;
unsigned long iis_clkrate;
- pr_debug("Entered %s\n", __func__);
-
iis_clkrate = s3c24xx_i2s_get_clockrate();
if (params_rate(params) != 8000)
@@ -192,13 +316,14 @@ static int neo1973_voice_hw_params(struct snd_pcm_substream *substream,
return ret;
/* set the codec system clock for DAC and ADC */
- ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK, 12288000,
- SND_SOC_CLOCK_IN);
+ ret = snd_soc_dai_set_sysclk(codec_dai, WM8753_PCMCLK,
+ 12288000, SND_SOC_CLOCK_IN);
if (ret < 0)
return ret;
/* set codec PCM division for sample rate */
- ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV, pcmdiv);
+ ret = snd_soc_dai_set_clkdiv(codec_dai, WM8753_PCMDIV,
+ pcmdiv);
if (ret < 0)
return ret;
@@ -216,8 +341,6 @@ static int neo1973_voice_hw_free(struct snd_pcm_substream *substream)
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct snd_soc_dai *codec_dai = rtd->dai->codec_dai;
- pr_debug("Entered %s\n", __func__);
-
/* disable the PLL */
return snd_soc_dai_set_pll(codec_dai, WM8753_PLL2, 0, 0);
}
@@ -227,202 +350,20 @@ static struct snd_soc_ops neo1973_voice_ops = {
.hw_free = neo1973_voice_hw_free,
};
-static int neo1973_scenario;
-
-static int neo1973_get_scenario(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- ucontrol->value.integer.value[0] = neo1973_scenario;
- return 0;
-}
-
-static int set_scenario_endpoints(struct snd_soc_codec *codec, int scenario)
-{
- pr_debug("Entered %s\n", __func__);
-
- switch (neo1973_scenario) {
- case NEO_AUDIO_OFF:
- snd_soc_dapm_disable_pin(codec, "Audio Out");
- snd_soc_dapm_disable_pin(codec, "GSM Line Out");
- snd_soc_dapm_disable_pin(codec, "GSM Line In");
- snd_soc_dapm_disable_pin(codec, "Headset Mic");
- snd_soc_dapm_disable_pin(codec, "Call Mic");
- break;
- case NEO_GSM_CALL_AUDIO_HANDSET:
- snd_soc_dapm_enable_pin(codec, "Audio Out");
- snd_soc_dapm_enable_pin(codec, "GSM Line Out");
- snd_soc_dapm_enable_pin(codec, "GSM Line In");
- snd_soc_dapm_disable_pin(codec, "Headset Mic");
- snd_soc_dapm_enable_pin(codec, "Call Mic");
- break;
- case NEO_GSM_CALL_AUDIO_HEADSET:
- snd_soc_dapm_enable_pin(codec, "Audio Out");
- snd_soc_dapm_enable_pin(codec, "GSM Line Out");
- snd_soc_dapm_enable_pin(codec, "GSM Line In");
- snd_soc_dapm_enable_pin(codec, "Headset Mic");
- snd_soc_dapm_disable_pin(codec, "Call Mic");
- break;
- case NEO_GSM_CALL_AUDIO_BLUETOOTH:
- snd_soc_dapm_disable_pin(codec, "Audio Out");
- snd_soc_dapm_enable_pin(codec, "GSM Line Out");
- snd_soc_dapm_enable_pin(codec, "GSM Line In");
- snd_soc_dapm_disable_pin(codec, "Headset Mic");
- snd_soc_dapm_disable_pin(codec, "Call Mic");
- break;
- case NEO_STEREO_TO_SPEAKERS:
- snd_soc_dapm_enable_pin(codec, "Audio Out");
- snd_soc_dapm_disable_pin(codec, "GSM Line Out");
- snd_soc_dapm_disable_pin(codec, "GSM Line In");
- snd_soc_dapm_disable_pin(codec, "Headset Mic");
- snd_soc_dapm_disable_pin(codec, "Call Mic");
- break;
- case NEO_STEREO_TO_HEADPHONES:
- snd_soc_dapm_enable_pin(codec, "Audio Out");
- snd_soc_dapm_disable_pin(codec, "GSM Line Out");
- snd_soc_dapm_disable_pin(codec, "GSM Line In");
- snd_soc_dapm_disable_pin(codec, "Headset Mic");
- snd_soc_dapm_disable_pin(codec, "Call Mic");
- break;
- case NEO_CAPTURE_HANDSET:
- snd_soc_dapm_disable_pin(codec, "Audio Out");
- snd_soc_dapm_disable_pin(codec, "GSM Line Out");
- snd_soc_dapm_disable_pin(codec, "GSM Line In");
- snd_soc_dapm_disable_pin(codec, "Headset Mic");
- snd_soc_dapm_enable_pin(codec, "Call Mic");
- break;
- case NEO_CAPTURE_HEADSET:
- snd_soc_dapm_disable_pin(codec, "Audio Out");
- snd_soc_dapm_disable_pin(codec, "GSM Line Out");
- snd_soc_dapm_disable_pin(codec, "GSM Line In");
- snd_soc_dapm_enable_pin(codec, "Headset Mic");
- snd_soc_dapm_disable_pin(codec, "Call Mic");
- break;
- case NEO_CAPTURE_BLUETOOTH:
- snd_soc_dapm_disable_pin(codec, "Audio Out");
- snd_soc_dapm_disable_pin(codec, "GSM Line Out");
- snd_soc_dapm_disable_pin(codec, "GSM Line In");
- snd_soc_dapm_disable_pin(codec, "Headset Mic");
- snd_soc_dapm_disable_pin(codec, "Call Mic");
- break;
- default:
- snd_soc_dapm_disable_pin(codec, "Audio Out");
- snd_soc_dapm_disable_pin(codec, "GSM Line Out");
- snd_soc_dapm_disable_pin(codec, "GSM Line In");
- snd_soc_dapm_disable_pin(codec, "Headset Mic");
- snd_soc_dapm_disable_pin(codec, "Call Mic");
- }
-
- snd_soc_dapm_sync(codec);
-
- return 0;
-}
-
-static int neo1973_set_scenario(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct snd_soc_codec *codec = snd_kcontrol_chip(kcontrol);
-
- pr_debug("Entered %s\n", __func__);
-
- if (neo1973_scenario == ucontrol->value.integer.value[0])
- return 0;
-
- neo1973_scenario = ucontrol->value.integer.value[0];
- set_scenario_endpoints(codec, neo1973_scenario);
- return 1;
-}
-
-static u8 lm4857_regs[4] = {0x00, 0x40, 0x80, 0xC0};
-
-static void lm4857_write_regs(void)
-{
- pr_debug("Entered %s\n", __func__);
-
- if (i2c_master_send(i2c, lm4857_regs, 4) != 4)
- printk(KERN_ERR "lm4857: i2c write failed\n");
-}
-
-static int lm4857_get_reg(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct soc_mixer_control *mc =
- (struct soc_mixer_control *)kcontrol->private_value;
- int reg = mc->reg;
- int shift = mc->shift;
- int mask = mc->max;
-
- pr_debug("Entered %s\n", __func__);
-
- ucontrol->value.integer.value[0] = (lm4857_regs[reg] >> shift) & mask;
- return 0;
-}
-
-static int lm4857_set_reg(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- struct soc_mixer_control *mc =
- (struct soc_mixer_control *)kcontrol->private_value;
- int reg = mc->reg;
- int shift = mc->shift;
- int mask = mc->max;
-
- if (((lm4857_regs[reg] >> shift) & mask) ==
- ucontrol->value.integer.value[0])
- return 0;
-
- lm4857_regs[reg] &= ~(mask << shift);
- lm4857_regs[reg] |= ucontrol->value.integer.value[0] << shift;
- lm4857_write_regs();
- return 1;
-}
-
-static int lm4857_get_mode(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- u8 value = lm4857_regs[LM4857_CTRL] & 0x0F;
-
- pr_debug("Entered %s\n", __func__);
-
- if (value)
- value -= 5;
-
- ucontrol->value.integer.value[0] = value;
- return 0;
-}
-
-static int lm4857_set_mode(struct snd_kcontrol *kcontrol,
- struct snd_ctl_elem_value *ucontrol)
-{
- u8 value = ucontrol->value.integer.value[0];
-
- pr_debug("Entered %s\n", __func__);
-
- if (value)
- value += 5;
-
- if ((lm4857_regs[LM4857_CTRL] & 0x0F) == value)
- return 0;
-
- lm4857_regs[LM4857_CTRL] &= 0xF0;
- lm4857_regs[LM4857_CTRL] |= value;
- lm4857_write_regs();
- return 1;
-}
+/* Shared routes and controls */
static const struct snd_soc_dapm_widget wm8753_dapm_widgets[] = {
- SND_SOC_DAPM_LINE("Audio Out", NULL),
SND_SOC_DAPM_LINE("GSM Line Out", NULL),
SND_SOC_DAPM_LINE("GSM Line In", NULL),
SND_SOC_DAPM_MIC("Headset Mic", NULL),
- SND_SOC_DAPM_MIC("Call Mic", NULL),
+ SND_SOC_DAPM_MIC("Handset Mic", NULL),
};
+static const struct snd_soc_dapm_route audio_map[] = {
-static const struct snd_soc_dapm_route dapm_routes[] = {
-
- /* Connections to the lm4857 amp */
- {"Audio Out", NULL, "LOUT1"},
- {"Audio Out", NULL, "ROUT1"},
+ /* Connections to the lm4853 amp */
+ {"Stereo Out", NULL, "LOUT1"},
+ {"Stereo Out", NULL, "ROUT1"},
/* Connections to the GSM Module */
{"GSM Line Out", NULL, "MONO1"},
@@ -437,12 +378,24 @@ static const struct snd_soc_dapm_route dapm_routes[] = {
/* Call Mic */
{"MIC2", NULL, "Mic Bias"},
{"MIC2N", NULL, "Mic Bias"},
- {"Mic Bias", NULL, "Call Mic"},
+ {"Mic Bias", NULL, "Handset Mic"},
/* Connect the ALC pins */
{"ACIN", NULL, "ACOP"},
};
+static const struct snd_kcontrol_new wm8753_neo1973_controls[] = {
+ SOC_DAPM_PIN_SWITCH("Stereo Out"),
+ SOC_DAPM_PIN_SWITCH("GSM Line Out"),
+ SOC_DAPM_PIN_SWITCH("GSM Line In"),
+ SOC_DAPM_PIN_SWITCH("Headset Mic"),
+ SOC_DAPM_PIN_SWITCH("Handset Mic"),
+};
+
+/* GTA01 specific controlls */
+
+#ifdef CONFIG_MACH_NEO1973_GTA01
+
static const char *lm4857_mode[] = {
"Off",
"Call Speaker",
@@ -455,26 +408,10 @@ static const struct soc_enum lm4857_mode_enum[] = {
SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(lm4857_mode), lm4857_mode),
};
-static const char *neo_scenarios[] = {
- "Off",
- "GSM Handset",
- "GSM Headset",
- "GSM Bluetooth",
- "Speakers",
- "Headphones",
- "Capture Handset",
- "Capture Headset",
- "Capture Bluetooth"
-};
-
-static const struct soc_enum neo_scenario_enum[] = {
- SOC_ENUM_SINGLE_EXT(ARRAY_SIZE(neo_scenarios), neo_scenarios),
-};
-
static const DECLARE_TLV_DB_SCALE(stereo_tlv, -4050, 150, 0);
static const DECLARE_TLV_DB_SCALE(mono_tlv, -3450, 150, 0);
-static const struct snd_kcontrol_new wm8753_neo1973_controls[] = {
+static const struct snd_kcontrol_new wm8753_neo1973_gta01_controls[] = {
SOC_SINGLE_EXT_TLV("Amp Left Playback Volume", LM4857_LVOL, 0, 31, 0,
lm4857_get_reg, lm4857_set_reg, stereo_tlv),
SOC_SINGLE_EXT_TLV("Amp Right Playback Volume", LM4857_RVOL, 0, 31, 0,
@@ -483,8 +420,6 @@ static const struct snd_kcontrol_new wm8753_neo1973_controls[] = {
lm4857_get_reg, lm4857_set_reg, mono_tlv),
SOC_ENUM_EXT("Amp Mode", lm4857_mode_enum[0],
lm4857_get_mode, lm4857_set_mode),
- SOC_ENUM_EXT("Neo Mode", neo_scenario_enum[0],
- neo1973_get_scenario, neo1973_set_scenario),
SOC_SINGLE_EXT("Amp Spk 3D Playback Switch", LM4857_LVOL, 5, 1, 0,
lm4857_get_reg, lm4857_set_reg),
SOC_SINGLE_EXT("Amp HP 3d Playback Switch", LM4857_RVOL, 5, 1, 0,
@@ -495,20 +430,98 @@ static const struct snd_kcontrol_new wm8753_neo1973_controls[] = {
lm4857_get_reg, lm4857_set_reg),
};
-/*
- * This is an example machine initialisation for a wm8753 connected to a
- * neo1973 II. It is missing logic to detect hp/mic insertions and logic
- * to re-route the audio in such an event.
- */
+static const struct snd_soc_dapm_widget wm8753_dapm_widgets_gta01[] = {
+ SND_SOC_DAPM_SPK("Stereo Out", NULL),
+};
+
+#else
+static const struct snd_kcontrol_new wm8753_neo1973_gta01_controls[] = {};
+static const struct snd_soc_dapm_widget wm8753_dapm_widgets_gta01[] = {};
+#endif
+
+/* GTA02 specific routes and controlls */
+
+#ifdef CONFIG_MACH_NEO1973_GTA02
+
+static int lm4853_set_spk(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ int val = ucontrol->value.integer.value[0];
+
+ gpio_set_value(GTA02_GPIO_HP_IN, !val);
+
+ return 0;
+}
+
+static int lm4853_get_spk(struct snd_kcontrol *kcontrol,
+ struct snd_ctl_elem_value *ucontrol)
+{
+ ucontrol->value.integer.value[0] = !gpio_get_value(GTA02_GPIO_HP_IN);
+
+ return 0;
+}
+
+static int lm4853_event(struct snd_soc_dapm_widget *w,
+ struct snd_kcontrol *k,
+ int event)
+{
+ gpio_set_value(GTA02_GPIO_AMP_SHUT, !SND_SOC_DAPM_EVENT_ON(event));
+
+ return 0;
+}
+
+static const struct snd_soc_dapm_route audio_map_gta02[] = {
+ /* Call Speaker */
+ {"Handset Spk", NULL, "LOUT2"},
+ {"Handset Spk", NULL, "ROUT2"},
+};
+
+static const struct snd_kcontrol_new wm8753_neo1973_gta02_controls[] = {
+ SOC_DAPM_PIN_SWITCH("Handset Spk"),
+
+ SOC_SINGLE_BOOL_EXT("Amp Spk Switch", 0,
+ lm4853_get_spk,
+ lm4853_set_spk),
+};
+
+static const struct snd_soc_dapm_widget wm8753_dapm_widgets_gta02[] = {
+ SND_SOC_DAPM_SPK("Stereo Out", lm4853_event),
+ SND_SOC_DAPM_SPK("Handset Spk", NULL),
+};
+
+#else
+static const struct snd_soc_dapm_route audio_map_gta02[]= {};
+static const struct snd_kcontrol_new wm8753_neo1973_gta02_controls[] = {};
+static const struct snd_soc_dapm_widget wm8753_dapm_widgets_gta02[] = {};
+#endif
+
static int neo1973_wm8753_init(struct snd_soc_codec *codec)
{
int err;
-
- pr_debug("Entered %s\n", __func__);
+ const struct snd_soc_dapm_widget *machine_widgets;
+ size_t num_machine_widgets;
+ const struct snd_kcontrol_new *machine_controls;
+ size_t num_machine_controls;
+
+ if (machine_is_neo1973_gta01()) {
+ machine_widgets = wm8753_dapm_widgets_gta01;
+ num_machine_widgets = ARRAY_SIZE(wm8753_dapm_widgets_gta01);
+
+ machine_controls = wm8753_neo1973_gta01_controls;
+ num_machine_controls = ARRAY_SIZE(wm8753_neo1973_gta01_controls);
+ } else {
+ machine_widgets = wm8753_dapm_widgets_gta02;
+ num_machine_widgets = ARRAY_SIZE(wm8753_dapm_widgets_gta02);
+
+ machine_controls = wm8753_neo1973_gta02_controls;
+ num_machine_controls = ARRAY_SIZE(wm8753_neo1973_gta02_controls);
+ }
/* set up NC codec pins */
- snd_soc_dapm_nc_pin(codec, "LOUT2");
- snd_soc_dapm_nc_pin(codec, "ROUT2");
+ if (!machine_is_neo1973_gta02()) {
+ snd_soc_dapm_nc_pin(codec, "LOUT2");
+ snd_soc_dapm_nc_pin(codec, "ROUT2");
+ }
snd_soc_dapm_nc_pin(codec, "OUT3");
snd_soc_dapm_nc_pin(codec, "OUT4");
snd_soc_dapm_nc_pin(codec, "LINE1");
@@ -518,20 +531,41 @@ static int neo1973_wm8753_init(struct snd_soc_codec *codec)
snd_soc_dapm_new_controls(codec, wm8753_dapm_widgets,
ARRAY_SIZE(wm8753_dapm_widgets));
- /* set endpoints to default mode */
- set_scenario_endpoints(codec, NEO_AUDIO_OFF);
+ snd_soc_dapm_new_controls(codec, machine_widgets, num_machine_widgets);
+
/* add neo1973 specific controls */
err = snd_soc_add_controls(codec, wm8753_neo1973_controls,
- ARRAY_SIZE(8753_neo1973_controls));
+ ARRAY_SIZE(wm8753_neo1973_controls));
+
if (err < 0)
return err;
- /* set up neo1973 specific audio routes */
- err = snd_soc_dapm_add_routes(codec, dapm_routes,
- ARRAY_SIZE(dapm_routes));
+ err = snd_soc_add_controls(codec, machine_controls,
+ num_machine_controls);
+
+ if (err < 0)
+ return err;
+
+ /* set up neo1973 gta02 specific audio path audio_map */
+ snd_soc_dapm_add_routes(codec, audio_map, ARRAY_SIZE(audio_map));
+
+ if (machine_is_neo1973_gta02()) {
+ snd_soc_dapm_add_routes(codec, audio_map_gta02,
+ ARRAY_SIZE(audio_map_gta02));
+ }
+
+ /* set endpoints to default off mode */
+ snd_soc_dapm_disable_pin(codec, "Stereo Out");
+ snd_soc_dapm_disable_pin(codec, "GSM Line Out");
+ snd_soc_dapm_disable_pin(codec, "GSM Line In");
+ snd_soc_dapm_disable_pin(codec, "Headset Mic");
+ snd_soc_dapm_disable_pin(codec, "Handset Mic");
+ if (machine_is_neo1973_gta02())
+ snd_soc_dapm_disable_pin(codec, "Handset Spk");
snd_soc_dapm_sync(codec);
+
return 0;
}
@@ -555,126 +589,111 @@ static struct snd_soc_dai bt_dai = {
static struct snd_soc_dai_link neo1973_dai[] = {
{ /* Hifi Playback - for similatious use with voice below */
- .name = "WM8753",
- .stream_name = "WM8753 HiFi",
- .cpu_dai = &s3c24xx_i2s_dai,
- .codec_dai = &wm8753_dai[WM8753_DAI_HIFI],
- .init = neo1973_wm8753_init,
- .ops = &neo1973_hifi_ops,
+ .name = "WM8753",
+ .stream_name = "WM8753 HiFi",
+ .cpu_dai = &s3c24xx_i2s_dai,
+ .codec_dai = &wm8753_dai[WM8753_DAI_HIFI],
+ .init = neo1973_wm8753_init,
+ .ops = &neo1973_hifi_ops,
},
{ /* Voice via BT */
- .name = "Bluetooth",
- .stream_name = "Voice",
- .cpu_dai = &bt_dai,
- .codec_dai = &wm8753_dai[WM8753_DAI_VOICE],
- .ops = &neo1973_voice_ops,
+ .name = "Bluetooth",
+ .stream_name = "Voice",
+ .cpu_dai = &bt_dai,
+ .codec_dai = &wm8753_dai[WM8753_DAI_VOICE],
+ .ops = &neo1973_voice_ops,
},
};
static struct snd_soc_card neo1973 = {
- .name = "neo1973",
- .platform = &s3c24xx_soc_platform,
- .dai_link = neo1973_dai,
- .num_links = ARRAY_SIZE(neo1973_dai),
+ .name = "neo1973",
+ .platform = &s3c24xx_soc_platform,
+ .dai_link = neo1973_dai,
+ .num_links = ARRAY_SIZE(neo1973_dai),
};
static struct snd_soc_device neo1973_snd_devdata = {
- .card = &neo1973,
- .codec_dev = &soc_codec_dev_wm8753,
+ .card = &neo1973,
+ .codec_dev = &soc_codec_dev_wm8753,
};
-static int lm4857_i2c_probe(struct i2c_client *client,
- const struct i2c_device_id *id)
-{
- pr_debug("Entered %s\n", __func__);
-
- i2c = client;
-
- lm4857_write_regs();
- return 0;
-}
+static struct platform_device *neo1973_snd_device;
-static int lm4857_i2c_remove(struct i2c_client *client)
+#ifdef CONFIG_MACH_NEO1973_GTA01
+static int __init neo1973_gta01_init(void)
{
- pr_debug("Entered %s\n", __func__);
-
- i2c = NULL;
-
- return 0;
+ return i2c_add_driver(&lm4857_i2c_driver);
}
+#else
+static inline int neo1973_gta01_init(void) { return 0; }
+#endif
-static u8 lm4857_state;
-
-static int lm4857_suspend(struct i2c_client *dev, pm_message_t state)
+#ifdef CONFIG_MACH_NEO1973_GTA02
+static int __init neo1973_gta02_init(void)
{
- pr_debug("Entered %s\n", __func__);
+ int ret;
- dev_dbg(&dev->dev, "lm4857_suspend\n");
- lm4857_state = lm4857_regs[LM4857_CTRL] & 0xf;
- if (lm4857_state) {
- lm4857_regs[LM4857_CTRL] &= 0xf0;
- lm4857_write_regs();
+ /* Initialise GPIOs used by amp */
+ ret = gpio_request(GTA02_GPIO_HP_IN, "GTA02_HP_IN");
+ if (ret) {
+ pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_HP_IN);
+ goto err;
}
- return 0;
-}
-
-static int lm4857_resume(struct i2c_client *dev)
-{
- pr_debug("Entered %s\n", __func__);
- if (lm4857_state) {
- lm4857_regs[LM4857_CTRL] |= (lm4857_state & 0x0f);
- lm4857_write_regs();
+ ret = gpio_direction_output(GTA02_GPIO_HP_IN, 1);
+ if (ret) {
+ pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_HP_IN);
+ goto err_free_gpio_hp_in;
}
- return 0;
-}
-static void lm4857_shutdown(struct i2c_client *dev)
-{
- pr_debug("Entered %s\n", __func__);
-
- dev_dbg(&dev->dev, "lm4857_shutdown\n");
- lm4857_regs[LM4857_CTRL] &= 0xf0;
- lm4857_write_regs();
-}
+ ret = gpio_request(GTA02_GPIO_AMP_SHUT, "GTA02_AMP_SHUT");
+ if (ret) {
+ pr_err("gta02_wm8753: Failed to register GPIO %d\n", GTA02_GPIO_AMP_SHUT);
+ goto err_free_gpio_hp_in;
+ }
-static const struct i2c_device_id lm4857_i2c_id[] = {
- { "neo1973_lm4857", 0 },
- { }
-};
+ ret = gpio_direction_output(GTA02_GPIO_AMP_SHUT, 1);
+ if (ret) {
+ pr_err("gta02_wm8753: Failed to configure GPIO %d\n", GTA02_GPIO_AMP_SHUT);
+ goto err_free_gpio_amp_shut;
+ }
-static struct i2c_driver lm4857_i2c_driver = {
- .driver = {
- .name = "LM4857 I2C Amp",
- .owner = THIS_MODULE,
- },
- .suspend = lm4857_suspend,
- .resume = lm4857_resume,
- .shutdown = lm4857_shutdown,
- .probe = lm4857_i2c_probe,
- .remove = lm4857_i2c_remove,
- .id_table = lm4857_i2c_id,
-};
+ return 0;
-static struct platform_device *neo1973_snd_device;
+err_free_gpio_amp_shut:
+ gpio_free(GTA02_GPIO_AMP_SHUT);
+err_free_gpio_hp_in:
+ gpio_free(GTA02_GPIO_HP_IN);
+err:
+ return ret;
+}
+#else
+static inline int neo1973_gta02_init(void) { return 0; }
+#endif
static int __init neo1973_init(void)
{
int ret;
- pr_debug("Entered %s\n", __func__);
-
- if (!machine_is_neo1973_gta01()) {
- printk(KERN_INFO
- "Only GTA01 hardware supported by ASoC driver\n");
+ if (!machine_is_neo1973_gta01() && !machine_is_neo1973_gta02()) {
return -ENODEV;
}
+ if (machine_is_neo1973_gta02()) {
+ neo1973_snd_devdata.card->name = "neo1973gta02";
+ }
+
+ /* register bluetooth DAI here */
+ ret = snd_soc_register_dai(&bt_dai);
+ if (ret)
+ return ret;
+
neo1973_snd_device = platform_device_alloc("soc-audio", -1);
if (!neo1973_snd_device)
return -ENOMEM;
- platform_set_drvdata(neo1973_snd_device, &neo1973_snd_devdata);
+ platform_set_drvdata(neo1973_snd_device,
+ &neo1973_snd_devdata);
neo1973_snd_devdata.dev = &neo1973_snd_device->dev;
ret = platform_device_add(neo1973_snd_device);
@@ -683,26 +702,54 @@ static int __init neo1973_init(void)
return ret;
}
- ret = i2c_add_driver(&lm4857_i2c_driver);
+ if (machine_is_neo1973_gta01())
+ ret = neo1973_gta01_init();
+ else
+ ret = neo1973_gta02_init();
- if (ret != 0)
- platform_device_unregister(neo1973_snd_device);
+ if (ret)
+ goto err_unregister_device;
+ return 0;
+
+err_unregister_device:
+ platform_device_unregister(neo1973_snd_device);
return ret;
}
+module_init(neo1973_init);
-static void __exit neo1973_exit(void)
+#ifdef CONFIG_MACH_NEO1973_GTA01
+static void __exit neo1973_gta01_exit(void)
{
- pr_debug("Entered %s\n", __func__);
-
i2c_del_driver(&lm4857_i2c_driver);
- platform_device_unregister(neo1973_snd_device);
}
+#else
+static inline void neo1973_gta01_exit(void) {}
+#endif
-module_init(neo1973_init);
+#ifdef CONFIG_MACH_NEO1973_GTA02
+static void __exit neo1973_gta02_exit(void)
+{
+ gpio_free(GTA02_GPIO_HP_IN);
+ gpio_free(GTA02_GPIO_AMP_SHUT);
+}
+#else
+static inline void neo1973_gta02_exit(void) {}
+#endif
+
+static void __exit neo1973_exit(void)
+{
+ snd_soc_unregister_dai(&bt_dai);
+ platform_device_unregister(neo1973_snd_device);
+
+ if (machine_is_neo1973_gta01())
+ neo1973_gta01_exit();
+ else
+ neo1973_gta02_exit();
+}
module_exit(neo1973_exit);
/* Module information */
-MODULE_AUTHOR("Graeme Gregory, graeme@openmoko.org, www.openmoko.org");
-MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973");
+MODULE_AUTHOR("Graeme Gregory, graeme@openmoko.org");
+MODULE_DESCRIPTION("ALSA SoC WM8753 Neo1973 devices");
MODULE_LICENSE("GPL");