aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/configs/nhk8815_defconfig2
-rw-r--r--arch/arm/mach-nomadik/board-nhk8815.c92
-rw-r--r--arch/arm/mach-nomadik/include/mach/fsmc.h29
-rw-r--r--arch/arm/mach-nomadik/include/mach/nand.h16
-rw-r--r--drivers/mtd/nand/Kconfig6
-rw-r--r--drivers/mtd/nand/Makefile1
-rw-r--r--drivers/mtd/nand/nomadik_nand.c250
7 files changed, 395 insertions, 1 deletions
diff --git a/arch/arm/configs/nhk8815_defconfig b/arch/arm/configs/nhk8815_defconfig
index 9bb45b932f0..600cb270f2b 100644
--- a/arch/arm/configs/nhk8815_defconfig
+++ b/arch/arm/configs/nhk8815_defconfig
@@ -498,7 +498,7 @@ CONFIG_MTD_CFI_I2=y
# CONFIG_MTD_DOC2001PLUS is not set
CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_NAND_ECC_SMC is not set
+CONFIG_MTD_NAND_ECC_SMC=y
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
diff --git a/arch/arm/mach-nomadik/board-nhk8815.c b/arch/arm/mach-nomadik/board-nhk8815.c
index 79bdea943eb..59c1dbb686c 100644
--- a/arch/arm/mach-nomadik/board-nhk8815.c
+++ b/arch/arm/mach-nomadik/board-nhk8815.c
@@ -16,12 +16,103 @@
#include <linux/amba/bus.h>
#include <linux/interrupt.h>
#include <linux/gpio.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+#include <asm/sizes.h>
#include <asm/mach-types.h>
#include <asm/mach/arch.h>
#include <asm/mach/irq.h>
#include <mach/setup.h>
+#include <mach/nand.h>
+#include <mach/fsmc.h>
#include "clock.h"
+/* These adresses span 16MB, so use three individual pages */
+static struct resource nhk8815_nand_resources[] = {
+ {
+ .name = "nand_addr",
+ .start = NAND_IO_ADDR,
+ .end = NAND_IO_ADDR + 0xfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "nand_cmd",
+ .start = NAND_IO_CMD,
+ .end = NAND_IO_CMD + 0xfff,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .name = "nand_data",
+ .start = NAND_IO_DATA,
+ .end = NAND_IO_DATA + 0xfff,
+ .flags = IORESOURCE_MEM,
+ }
+};
+
+static int nhk8815_nand_init(void)
+{
+ /* FSMC setup for nand chip select (8-bit nand in 8815NHK) */
+ writel(0x0000000E, FSMC_PCR(0));
+ writel(0x000D0A00, FSMC_PMEM(0));
+ writel(0x00100A00, FSMC_PATT(0));
+
+ /* enable access to the chip select area */
+ writel(readl(FSMC_PCR(0)) | 0x04, FSMC_PCR(0));
+
+ return 0;
+}
+
+/*
+ * These partitions are the same as those used in the 2.6.20 release
+ * shipped by the vendor; the first two partitions are mandated
+ * by the boot ROM, and the bootloader area is somehow oversized...
+ */
+static struct mtd_partition nhk8815_partitions[] = {
+ {
+ .name = "X-Loader(NAND)",
+ .offset = 0,
+ .size = SZ_256K,
+ }, {
+ .name = "MemInit(NAND)",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_256K,
+ }, {
+ .name = "BootLoader(NAND)",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_2M,
+ }, {
+ .name = "Kernel zImage(NAND)",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 3 * SZ_1M,
+ }, {
+ .name = "Root Filesystem(NAND)",
+ .offset = MTDPART_OFS_APPEND,
+ .size = 22 * SZ_1M,
+ }, {
+ .name = "User Filesystem(NAND)",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ }
+};
+
+static struct nomadik_nand_platform_data nhk8815_nand_data = {
+ .parts = nhk8815_partitions,
+ .nparts = ARRAY_SIZE(nhk8815_partitions),
+ .options = NAND_COPYBACK | NAND_CACHEPRG | NAND_NO_PADDING \
+ | NAND_NO_READRDY | NAND_NO_AUTOINCR,
+ .init = nhk8815_nand_init,
+};
+
+static struct platform_device nhk8815_nand_device = {
+ .name = "nomadik_nand",
+ .dev = {
+ .platform_data = &nhk8815_nand_data,
+ },
+ .resource = nhk8815_nand_resources,
+ .num_resources = ARRAY_SIZE(nhk8815_nand_resources),
+};
+
+
#define __MEM_4K_RESOURCE(x) \
.res = {.start = (x), .end = (x) + SZ_4K - 1, .flags = IORESOURCE_MEM}
@@ -81,6 +172,7 @@ static int __init nhk8815_eth_init(void)
device_initcall(nhk8815_eth_init);
static struct platform_device *nhk8815_platform_devices[] __initdata = {
+ &nhk8815_nand_device,
&nhk8815_eth_device,
/* will add more devices */
};
diff --git a/arch/arm/mach-nomadik/include/mach/fsmc.h b/arch/arm/mach-nomadik/include/mach/fsmc.h
new file mode 100644
index 00000000000..8c2c0518368
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/fsmc.h
@@ -0,0 +1,29 @@
+
+/* Definitions for the Nomadik FSMC "Flexible Static Memory controller" */
+
+#ifndef __ASM_ARCH_FSMC_H
+#define __ASM_ARCH_FSMC_H
+
+#include <mach/hardware.h>
+/*
+ * Register list
+ */
+
+/* bus control reg. and bus timing reg. for CS0..CS3 */
+#define FSMC_BCR(x) (NOMADIK_FSMC_VA + (x << 3))
+#define FSMC_BTR(x) (NOMADIK_FSMC_VA + (x << 3) + 0x04)
+
+/* PC-card and NAND:
+ * PCR = control register
+ * PMEM = memory timing
+ * PATT = attribute timing
+ * PIO = I/O timing
+ * PECCR = ECC result
+ */
+#define FSMC_PCR(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x00)
+#define FSMC_PMEM(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x08)
+#define FSMC_PATT(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x0c)
+#define FSMC_PIO(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x10)
+#define FSMC_PECCR(x) (NOMADIK_FSMC_VA + ((2 + x) << 5) + 0x14)
+
+#endif /* __ASM_ARCH_FSMC_H */
diff --git a/arch/arm/mach-nomadik/include/mach/nand.h b/arch/arm/mach-nomadik/include/mach/nand.h
new file mode 100644
index 00000000000..c3c8254c22a
--- /dev/null
+++ b/arch/arm/mach-nomadik/include/mach/nand.h
@@ -0,0 +1,16 @@
+#ifndef __ASM_ARCH_NAND_H
+#define __ASM_ARCH_NAND_H
+
+struct nomadik_nand_platform_data {
+ struct mtd_partition *parts;
+ int nparts;
+ int options;
+ int (*init) (void);
+ int (*exit) (void);
+};
+
+#define NAND_IO_DATA 0x40000000
+#define NAND_IO_CMD 0x40800000
+#define NAND_IO_ADDR 0x41000000
+
+#endif /* __ASM_ARCH_NAND_H */
diff --git a/drivers/mtd/nand/Kconfig b/drivers/mtd/nand/Kconfig
index 2c9a0ed4aed..2fda0b61524 100644
--- a/drivers/mtd/nand/Kconfig
+++ b/drivers/mtd/nand/Kconfig
@@ -443,6 +443,12 @@ config MTD_NAND_MXC
This enables the driver for the NAND flash controller on the
MXC processors.
+config MTD_NAND_NOMADIK
+ tristate "ST Nomadik 8815 NAND support"
+ depends on ARCH_NOMADIK
+ help
+ Driver for the NAND flash controller on the Nomadik, with ECC.
+
config MTD_NAND_SH_FLCTL
tristate "Support for NAND on Renesas SuperH FLCTL"
depends on MTD_NAND && SUPERH && CPU_SUBTYPE_SH7723
diff --git a/drivers/mtd/nand/Makefile b/drivers/mtd/nand/Makefile
index 4f7b1890f83..6950d3dabf1 100644
--- a/drivers/mtd/nand/Makefile
+++ b/drivers/mtd/nand/Makefile
@@ -41,5 +41,6 @@ obj-$(CONFIG_MTD_NAND_MXC) += mxc_nand.o
obj-$(CONFIG_MTD_NAND_SOCRATES) += socrates_nand.o
obj-$(CONFIG_MTD_NAND_TXX9NDFMC) += txx9ndfmc.o
obj-$(CONFIG_MTD_NAND_W90P910) += w90p910_nand.o
+obj-$(CONFIG_MTD_NAND_NOMADIK) += nomadik_nand.o
nand-objs := nand_base.o nand_bbt.o
diff --git a/drivers/mtd/nand/nomadik_nand.c b/drivers/mtd/nand/nomadik_nand.c
new file mode 100644
index 00000000000..7c302d55910
--- /dev/null
+++ b/drivers/mtd/nand/nomadik_nand.c
@@ -0,0 +1,250 @@
+/*
+ * drivers/mtd/nand/nomadik_nand.c
+ *
+ * Overview:
+ * Driver for on-board NAND flash on Nomadik Platforms
+ *
+ * Copyright © 2007 STMicroelectronics Pvt. Ltd.
+ * Author: Sachin Verma <sachin.verma@st.com>
+ *
+ * Copyright © 2009 Alessandro Rubini
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ */
+
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/types.h>
+#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
+#include <linux/mtd/nand_ecc.h>
+#include <linux/platform_device.h>
+#include <linux/mtd/partitions.h>
+#include <linux/io.h>
+#include <mach/nand.h>
+#include <mach/fsmc.h>
+
+#include <mtd/mtd-abi.h>
+
+struct nomadik_nand_host {
+ struct mtd_info mtd;
+ struct nand_chip nand;
+ void __iomem *data_va;
+ void __iomem *cmd_va;
+ void __iomem *addr_va;
+ struct nand_bbt_descr *bbt_desc;
+};
+
+static struct nand_ecclayout nomadik_ecc_layout = {
+ .eccbytes = 3 * 4,
+ .eccpos = { /* each subpage has 16 bytes: pos 2,3,4 hosts ECC */
+ 0x02, 0x03, 0x04,
+ 0x12, 0x13, 0x14,
+ 0x22, 0x23, 0x24,
+ 0x32, 0x33, 0x34},
+ /* let's keep bytes 5,6,7 for us, just in case we change ECC algo */
+ .oobfree = { {0x08, 0x08}, {0x18, 0x08}, {0x28, 0x08}, {0x38, 0x08} },
+};
+
+static void nomadik_ecc_control(struct mtd_info *mtd, int mode)
+{
+ /* No need to enable hw ecc, it's on by default */
+}
+
+static void nomadik_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
+{
+ struct nand_chip *nand = mtd->priv;
+ struct nomadik_nand_host *host = nand->priv;
+
+ if (cmd == NAND_CMD_NONE)
+ return;
+
+ if (ctrl & NAND_CLE)
+ writeb(cmd, host->cmd_va);
+ else
+ writeb(cmd, host->addr_va);
+}
+
+static int nomadik_nand_probe(struct platform_device *pdev)
+{
+ struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data;
+ struct nomadik_nand_host *host;
+ struct mtd_info *mtd;
+ struct nand_chip *nand;
+ struct resource *res;
+ int ret = 0;
+
+ /* Allocate memory for the device structure (and zero it) */
+ host = kzalloc(sizeof(struct nomadik_nand_host), GFP_KERNEL);
+ if (!host) {
+ dev_err(&pdev->dev, "Failed to allocate device structure.\n");
+ return -ENOMEM;
+ }
+
+ /* Call the client's init function, if any */
+ if (pdata->init)
+ ret = pdata->init();
+ if (ret < 0) {
+ dev_err(&pdev->dev, "Init function failed\n");
+ goto err;
+ }
+
+ /* ioremap three regions */
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_addr");
+ if (!res) {
+ ret = -EIO;
+ goto err_unmap;
+ }
+ host->addr_va = ioremap(res->start, res->end - res->start + 1);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_data");
+ if (!res) {
+ ret = -EIO;
+ goto err_unmap;
+ }
+ host->data_va = ioremap(res->start, res->end - res->start + 1);
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "nand_cmd");
+ if (!res) {
+ ret = -EIO;
+ goto err_unmap;
+ }
+ host->cmd_va = ioremap(res->start, res->end - res->start + 1);
+
+ if (!host->addr_va || !host->data_va || !host->cmd_va) {
+ ret = -ENOMEM;
+ goto err_unmap;
+ }
+
+ /* Link all private pointers */
+ mtd = &host->mtd;
+ nand = &host->nand;
+ mtd->priv = nand;
+ nand->priv = host;
+
+ host->mtd.owner = THIS_MODULE;
+ nand->IO_ADDR_R = host->data_va;
+ nand->IO_ADDR_W = host->data_va;
+ nand->cmd_ctrl = nomadik_cmd_ctrl;
+
+ /*
+ * This stanza declares ECC_HW but uses soft routines. It's because
+ * HW claims to make the calculation but not the correction. However,
+ * I haven't managed to get the desired data out of it until now.
+ */
+ nand->ecc.mode = NAND_ECC_SOFT;
+ nand->ecc.layout = &nomadik_ecc_layout;
+ nand->ecc.hwctl = nomadik_ecc_control;
+ nand->ecc.size = 512;
+ nand->ecc.bytes = 3;
+
+ nand->options = pdata->options;
+
+ /*
+ * Scan to find existance of the device
+ */
+ if (nand_scan(&host->mtd, 1)) {
+ ret = -ENXIO;
+ goto err_unmap;
+ }
+
+#ifdef CONFIG_MTD_PARTITIONS
+ add_mtd_partitions(&host->mtd, pdata->parts, pdata->nparts);
+#else
+ pr_info("Registering %s as whole device\n", mtd->name);
+ add_mtd_device(mtd);
+#endif
+
+ platform_set_drvdata(pdev, host);
+ return 0;
+
+ err_unmap:
+ if (host->cmd_va)
+ iounmap(host->cmd_va);
+ if (host->data_va)
+ iounmap(host->data_va);
+ if (host->addr_va)
+ iounmap(host->addr_va);
+ err:
+ kfree(host);
+ return ret;
+}
+
+/*
+ * Clean up routine
+ */
+static int nomadik_nand_remove(struct platform_device *pdev)
+{
+ struct nomadik_nand_host *host = platform_get_drvdata(pdev);
+ struct nomadik_nand_platform_data *pdata = pdev->dev.platform_data;
+
+ if (pdata->exit)
+ pdata->exit();
+
+ if (host) {
+ iounmap(host->cmd_va);
+ iounmap(host->data_va);
+ iounmap(host->addr_va);
+ kfree(host);
+ }
+ return 0;
+}
+
+static int nomadik_nand_suspend(struct device *dev)
+{
+ struct nomadik_nand_host *host = dev_get_drvdata(dev);
+ int ret = 0;
+ if (host)
+ ret = host->mtd.suspend(&host->mtd);
+ return ret;
+}
+
+static int nomadik_nand_resume(struct device *dev)
+{
+ struct nomadik_nand_host *host = dev_get_drvdata(dev);
+ if (host)
+ host->mtd.resume(&host->mtd);
+ return 0;
+}
+
+static struct dev_pm_ops nomadik_nand_pm_ops = {
+ .suspend = nomadik_nand_suspend,
+ .resume = nomadik_nand_resume,
+};
+
+static struct platform_driver nomadik_nand_driver = {
+ .probe = nomadik_nand_probe,
+ .remove = nomadik_nand_remove,
+ .driver = {
+ .owner = THIS_MODULE,
+ .name = "nomadik_nand",
+ .pm = &nomadik_nand_pm_ops,
+ },
+};
+
+static int __init nand_nomadik_init(void)
+{
+ pr_info("Nomadik NAND driver\n");
+ return platform_driver_register(&nomadik_nand_driver);
+}
+
+static void __exit nand_nomadik_exit(void)
+{
+ platform_driver_unregister(&nomadik_nand_driver);
+}
+
+module_init(nand_nomadik_init);
+module_exit(nand_nomadik_exit);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("ST Microelectronics (sachin.verma@st.com)");
+MODULE_DESCRIPTION("NAND driver for Nomadik Platform");