diff options
| -rw-r--r-- | arch/arm/mach-omap2/Makefile | 2 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/omap_hwmod.c | 1555 | ||||
| -rw-r--r-- | arch/arm/plat-omap/include/mach/omap_hwmod.h | 447 |
3 files changed, 2003 insertions, 1 deletions
diff --git a/arch/arm/mach-omap2/Makefile b/arch/arm/mach-omap2/Makefile index 59d730fa77e..8cb16777661 100644 --- a/arch/arm/mach-omap2/Makefile +++ b/arch/arm/mach-omap2/Makefile @@ -5,7 +5,7 @@ # Common support obj-y := id.o io.o control.o mux.o devices.o serial.o gpmc.o timer-gp.o -omap-2-3-common = irq.o sdrc.o +omap-2-3-common = irq.o sdrc.o omap_hwmod.o prcm-common = prcm.o powerdomain.o clock-common = clock.o clockdomain.o diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c new file mode 100644 index 00000000000..3b10ad6c47d --- /dev/null +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -0,0 +1,1555 @@ +/* + * omap_hwmod implementation for OMAP2/3/4 + * + * Copyright (C) 2009 Nokia Corporation + * Paul Walmsley + * With fixes and testing from Kevin Hilman + * + * Created in collaboration with (alphabetical order): Benoit Cousson, + * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari + * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * This code manages "OMAP modules" (on-chip devices) and their + * integration with Linux device driver and bus code. + * + * References: + * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064) + * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090) + * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108) + * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140) + * - Open Core Protocol Specification 2.2 + * + * To do: + * - pin mux handling + * - handle IO mapping + * - bus throughput & module latency measurement code + * + * XXX add tests at the beginning of each function to ensure the hwmod is + * in the appropriate state + * XXX error return values should be checked to ensure that they are + * appropriate + */ +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/clk.h> +#include <linux/delay.h> +#include <linux/err.h> +#include <linux/list.h> +#include <linux/mutex.h> +#include <linux/bootmem.h> + +#include <mach/cpu.h> +#include <mach/clockdomain.h> +#include <mach/powerdomain.h> +#include <mach/clock.h> +#include <mach/omap_hwmod.h> + +#include "cm.h" + +/* Maximum microseconds to wait for OMAP module to reset */ +#define MAX_MODULE_RESET_WAIT 10000 + +/* Name of the OMAP hwmod for the MPU */ +#define MPU_INITIATOR_NAME "mpu_hwmod" + +/* omap_hwmod_list contains all registered struct omap_hwmods */ +static LIST_HEAD(omap_hwmod_list); + +static DEFINE_MUTEX(omap_hwmod_mutex); + +/* mpu_oh: used to add/remove MPU initiator from sleepdep list */ +static struct omap_hwmod *mpu_oh; + +/* inited: 0 if omap_hwmod_init() has not yet been called; 1 otherwise */ +static u8 inited; + + +/* Private functions */ + +/** + * _update_sysc_cache - return the module OCP_SYSCONFIG register, keep copy + * @oh: struct omap_hwmod * + * + * Load the current value of the hwmod OCP_SYSCONFIG register into the + * struct omap_hwmod for later use. Returns -EINVAL if the hwmod has no + * OCP_SYSCONFIG register or 0 upon success. + */ +static int _update_sysc_cache(struct omap_hwmod *oh) +{ + if (!oh->sysconfig) { + WARN(!oh->sysconfig, "omap_hwmod: %s: cannot read " + "OCP_SYSCONFIG: not defined on hwmod\n", oh->name); + return -EINVAL; + } + + /* XXX ensure module interface clock is up */ + + oh->_sysc_cache = omap_hwmod_readl(oh, oh->sysconfig->sysc_offs); + + oh->_int_flags |= _HWMOD_SYSCONFIG_LOADED; + + return 0; +} + +/** + * _write_sysconfig - write a value to the module's OCP_SYSCONFIG register + * @v: OCP_SYSCONFIG value to write + * @oh: struct omap_hwmod * + * + * Write @v into the module OCP_SYSCONFIG register, if it has one. No + * return value. + */ +static void _write_sysconfig(u32 v, struct omap_hwmod *oh) +{ + if (!oh->sysconfig) { + WARN(!oh->sysconfig, "omap_hwmod: %s: cannot write " + "OCP_SYSCONFIG: not defined on hwmod\n", oh->name); + return; + } + + /* XXX ensure module interface clock is up */ + + if (oh->_sysc_cache != v) { + oh->_sysc_cache = v; + omap_hwmod_writel(v, oh, oh->sysconfig->sysc_offs); + } +} + +/** + * _set_master_standbymode: set the OCP_SYSCONFIG MIDLEMODE field in @v + * @oh: struct omap_hwmod * + * @standbymode: MIDLEMODE field bits + * @v: pointer to register contents to modify + * + * Update the master standby mode bits in @v to be @standbymode for + * the @oh hwmod. Does not write to the hardware. Returns -EINVAL + * upon error or 0 upon success. + */ +static int _set_master_standbymode(struct omap_hwmod *oh, u8 standbymode, + u32 *v) +{ + if (!oh->sysconfig || + !(oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE)) + return -EINVAL; + + *v &= ~SYSC_MIDLEMODE_MASK; + *v |= __ffs(standbymode) << SYSC_MIDLEMODE_SHIFT; + + return 0; +} + +/** + * _set_slave_idlemode: set the OCP_SYSCONFIG SIDLEMODE field in @v + * @oh: struct omap_hwmod * + * @idlemode: SIDLEMODE field bits + * @v: pointer to register contents to modify + * + * Update the slave idle mode bits in @v to be @idlemode for the @oh + * hwmod. Does not write to the hardware. Returns -EINVAL upon error + * or 0 upon success. + */ +static int _set_slave_idlemode(struct omap_hwmod *oh, u8 idlemode, u32 *v) +{ + if (!oh->sysconfig || + !(oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE)) + return -EINVAL; + + *v &= ~SYSC_SIDLEMODE_MASK; + *v |= __ffs(idlemode) << SYSC_SIDLEMODE_SHIFT; + + return 0; +} + +/** + * _set_clockactivity: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v + * @oh: struct omap_hwmod * + * @clockact: CLOCKACTIVITY field bits + * @v: pointer to register contents to modify + * + * Update the clockactivity mode bits in @v to be @clockact for the + * @oh hwmod. Used for additional powersaving on some modules. Does + * not write to the hardware. Returns -EINVAL upon error or 0 upon + * success. + */ +static int _set_clockactivity(struct omap_hwmod *oh, u8 clockact, u32 *v) +{ + if (!oh->sysconfig || + !(oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY)) + return -EINVAL; + + *v &= ~SYSC_CLOCKACTIVITY_MASK; + *v |= clockact << SYSC_CLOCKACTIVITY_SHIFT; + + return 0; +} + +/** + * _set_softreset: set OCP_SYSCONFIG.CLOCKACTIVITY bits in @v + * @oh: struct omap_hwmod * + * @v: pointer to register contents to modify + * + * Set the SOFTRESET bit in @v for hwmod @oh. Returns -EINVAL upon + * error or 0 upon success. + */ +static int _set_softreset(struct omap_hwmod *oh, u32 *v) +{ + if (!oh->sysconfig || + !(oh->sysconfig->sysc_flags & SYSC_HAS_SOFTRESET)) + return -EINVAL; + + *v |= SYSC_SOFTRESET_MASK; + + return 0; +} + +/** + * _enable_wakeup: set OCP_SYSCONFIG.ENAWAKEUP bit in the hardware + * @oh: struct omap_hwmod * + * + * Allow the hardware module @oh to send wakeups. Returns -EINVAL + * upon error or 0 upon success. + */ +static int _enable_wakeup(struct omap_hwmod *oh) +{ + u32 v; + + if (!oh->sysconfig || + !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP)) + return -EINVAL; + + v = oh->_sysc_cache; + v |= SYSC_ENAWAKEUP_MASK; + _write_sysconfig(v, oh); + + /* XXX test pwrdm_get_wken for this hwmod's subsystem */ + + oh->_int_flags |= _HWMOD_WAKEUP_ENABLED; + + return 0; +} + +/** + * _disable_wakeup: clear OCP_SYSCONFIG.ENAWAKEUP bit in the hardware + * @oh: struct omap_hwmod * + * + * Prevent the hardware module @oh to send wakeups. Returns -EINVAL + * upon error or 0 upon success. + */ +static int _disable_wakeup(struct omap_hwmod *oh) +{ + u32 v; + + if (!oh->sysconfig || + !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP)) + return -EINVAL; + + v = oh->_sysc_cache; + v &= ~SYSC_ENAWAKEUP_MASK; + _write_sysconfig(v, oh); + + /* XXX test pwrdm_get_wken for this hwmod's subsystem */ + + oh->_int_flags &= ~_HWMOD_WAKEUP_ENABLED; + + return 0; +} + +/** + * _add_initiator_dep: prevent @oh from smart-idling while @init_oh is active + * @oh: struct omap_hwmod * + * + * Prevent the hardware module @oh from entering idle while the + * hardare module initiator @init_oh is active. Useful when a module + * will be accessed by a particular initiator (e.g., if a module will + * be accessed by the IVA, there should be a sleepdep between the IVA + * initiator and the module). Only applies to modules in smart-idle + * mode. Returns -EINVAL upon error or passes along + * pwrdm_add_sleepdep() value upon success. + */ +static int _add_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh) +{ + if (!oh->_clk) + return -EINVAL; + + return pwrdm_add_sleepdep(oh->_clk->clkdm->pwrdm.ptr, + init_oh->_clk->clkdm->pwrdm.ptr); +} + +/** + * _del_initiator_dep: allow @oh to smart-idle even if @init_oh is active + * @oh: struct omap_hwmod * + * + * Allow the hardware module @oh to enter idle while the hardare + * module initiator @init_oh is active. Useful when a module will not + * be accessed by a particular initiator (e.g., if a module will not + * be accessed by the IVA, there should be no sleepdep between the IVA + * initiator and the module). Only applies to modules in smart-idle + * mode. Returns -EINVAL upon error or passes along + * pwrdm_add_sleepdep() value upon success. + */ +static int _del_initiator_dep(struct omap_hwmod *oh, struct omap_hwmod *init_oh) +{ + if (!oh->_clk) + return -EINVAL; + + return pwrdm_del_sleepdep(oh->_clk->clkdm->pwrdm.ptr, + init_oh->_clk->clkdm->pwrdm.ptr); +} + +/** + * _init_main_clk - get a struct clk * for the the hwmod's main functional clk + * @oh: struct omap_hwmod * + * + * Called from _init_clocks(). Populates the @oh _clk (main + * functional clock pointer) if a main_clk is present. Returns 0 on + * success or -EINVAL on error. + */ +static int _init_main_clk(struct omap_hwmod *oh) +{ + struct clk *c; + int ret = 0; + + if (!oh->clkdev_con_id) + return 0; + + c = clk_get_sys(oh->clkdev_dev_id, oh->clkdev_con_id); + WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get main_clk %s.%s\n", + oh->name, oh->clkdev_dev_id, oh->clkdev_con_id); + if (IS_ERR(c)) + ret = -EINVAL; + oh->_clk = c; + + return ret; +} + +/** + * _init_interface_clk - get a struct clk * for the the hwmod's interface clks + * @oh: struct omap_hwmod * + * + * Called from _init_clocks(). Populates the @oh OCP slave interface + * clock pointers. Returns 0 on success or -EINVAL on error. + */ +static int _init_interface_clks(struct omap_hwmod *oh) +{ + struct omap_hwmod_ocp_if *os; + struct clk *c; + int i; + int ret = 0; + + if (oh->slaves_cnt == 0) + return 0; + + for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) { + if (!os->clkdev_con_id) + continue; + + c = clk_get_sys(os->clkdev_dev_id, os->clkdev_con_id); + WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get " + "interface_clk %s.%s\n", oh->name, + os->clkdev_dev_id, os->clkdev_con_id); + if (IS_ERR(c)) + ret = -EINVAL; + os->_clk = c; + } + + return ret; +} + +/** + * _init_opt_clk - get a struct clk * for the the hwmod's optional clocks + * @oh: struct omap_hwmod * + * + * Called from _init_clocks(). Populates the @oh omap_hwmod_opt_clk + * clock pointers. Returns 0 on success or -EINVAL on error. + */ +static int _init_opt_clks(struct omap_hwmod *oh) +{ + struct omap_hwmod_opt_clk *oc; + struct clk *c; + int i; + int ret = 0; + + for (i = oh->opt_clks_cnt, oc = oh->opt_clks; i > 0; i--, oc++) { + c = clk_get_sys(oc->clkdev_dev_id, oc->clkdev_con_id); + WARN(IS_ERR(c), "omap_hwmod: %s: cannot clk_get opt_clk " + "%s.%s\n", oh->name, oc->clkdev_dev_id, + oc->clkdev_con_id); + if (IS_ERR(c)) + ret = -EINVAL; + oc->_clk = c; + } + + return ret; +} + +/** + * _enable_clocks - enable hwmod main clock and interface clocks + * @oh: struct omap_hwmod * + * + * Enables all clocks necessary for register reads and writes to succeed + * on the hwmod @oh. Returns 0. + */ +static int _enable_clocks(struct omap_hwmod *oh) +{ + struct omap_hwmod_ocp_if *os; + int i; + + pr_debug("omap_hwmod: %s: enabling clocks\n", oh->name); + + if (oh->_clk && !IS_ERR(oh->_clk)) + clk_enable(oh->_clk); + + if (oh->slaves_cnt > 0) { + for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) { + struct clk *c = os->_clk; + + if (c && !IS_ERR(c) && (os->flags & OCPIF_SWSUP_IDLE)) + clk_enable(c); + } + } + + /* The opt clocks are controlled by the device driver. */ + + return 0; +} + +/** + * _disable_clocks - disable hwmod main clock and interface clocks + * @oh: struct omap_hwmod * + * + * Disables the hwmod @oh main functional and interface clocks. Returns 0. + */ +static int _disable_clocks(struct omap_hwmod *oh) +{ + struct omap_hwmod_ocp_if *os; + int i; + + pr_debug("omap_hwmod: %s: disabling clocks\n", oh->name); + + if (oh->_clk && !IS_ERR(oh->_clk)) + clk_disable(oh->_clk); + + if (oh->slaves_cnt > 0) { + for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) { + struct clk *c = os->_clk; + + if (c && !IS_ERR(c) && (os->flags & OCPIF_SWSUP_IDLE)) + clk_disable(c); + } + } + + /* The opt clocks are controlled by the device driver. */ + + return 0; +} + +/** + * _find_mpu_port_index - find hwmod OCP slave port ID intended for MPU use + * @oh: struct omap_hwmod * + * + * Returns the array index of the OCP slave port that the MPU + * addresses the device on, or -EINVAL upon error or not found. + */ +static int _find_mpu_port_index(struct omap_hwmod *oh) +{ + struct omap_hwmod_ocp_if *os; + int i; + int found = 0; + + if (!oh || oh->slaves_cnt == 0) + return -EINVAL; + + for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) { + if (os->user & OCP_USER_MPU) { + found = 1; + break; + } + } + + if (found) + pr_debug("omap_hwmod: %s: MPU OCP slave port ID %d\n", + oh->name, i); + else + pr_debug("omap_hwmod: %s: no MPU OCP slave port found\n", + oh->name); + + return (found) ? i : -EINVAL; +} + +/** + * _find_mpu_rt_base - find hwmod register target base addr accessible by MPU + * @oh: struct omap_hwmod * + * + * Return the virtual address of the base of the register target of + * device @oh, or NULL on error. + */ +static void __iomem *_find_mpu_rt_base(struct omap_hwmod *oh, u8 index) +{ + struct omap_hwmod_ocp_if *os; + struct omap_hwmod_addr_space *mem; + int i; + int found = 0; + + if (!oh || oh->slaves_cnt == 0) + return NULL; + + os = *oh->slaves + index; + + for (i = 0, mem = os->addr; i < os->addr_cnt; i++, mem++) { + if (mem->flags & ADDR_TYPE_RT) { + found = 1; + break; + } + } + + /* XXX use ioremap() instead? */ + + if (found) + pr_debug("omap_hwmod: %s: MPU register target at va %p\n", + oh->name, OMAP2_IO_ADDRESS(mem->pa_start)); + else + pr_debug("omap_hwmod: %s: no MPU register target found\n", + oh->name); + + return (found) ? OMAP2_IO_ADDRESS(mem->pa_start) : NULL; +} + +/** + * _sysc_enable - try to bring a module out of idle via OCP_SYSCONFIG + * @oh: struct omap_hwmod * + * + * If module is marked as SWSUP_SIDLE, force the module out of slave + * idle; otherwise, configure it for smart-idle. If module is marked + * as SWSUP_MSUSPEND, force the module out of master standby; + * otherwise, configure it for smart-standby. No return value. + */ +static void _sysc_enable(struct omap_hwmod *oh) +{ + u8 idlemode; + u32 v; + + if (!oh->sysconfig) + return; + + v = oh->_sysc_cache; + + if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE) { + idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? + HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; + _set_slave_idlemode(oh, idlemode, &v); + } + + if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE) { + idlemode = (oh->flags & HWMOD_SWSUP_MSTANDBY) ? + HWMOD_IDLEMODE_NO : HWMOD_IDLEMODE_SMART; + _set_master_standbymode(oh, idlemode, &v); + } + + /* XXX OCP AUTOIDLE bit? */ + + if (oh->flags & HWMOD_SET_DEFAULT_CLOCKACT && + oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY) + _set_clockactivity(oh, oh->sysconfig->clockact, &v); + + _write_sysconfig(v, oh); +} + +/** + * _sysc_idle - try to put a module into idle via OCP_SYSCONFIG + * @oh: struct omap_hwmod * + * + * If module is marked as SWSUP_SIDLE, force the module into slave + * idle; otherwise, configure it for smart-idle. If module is marked + * as SWSUP_MSUSPEND, force the module into master standby; otherwise, + * configure it for smart-standby. No return value. + */ +static void _sysc_idle(struct omap_hwmod *oh) +{ + u8 idlemode; + u32 v; + + if (!oh->sysconfig) + return; + + v = oh->_sysc_cache; + + if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE) { + idlemode = (oh->flags & HWMOD_SWSUP_SIDLE) ? + HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART; + _set_slave_idlemode(oh, idlemode, &v); + } + + if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE) { + idlemode = (oh->flags & HWMOD_SWSUP_MSTANDBY) ? + HWMOD_IDLEMODE_FORCE : HWMOD_IDLEMODE_SMART; + _set_master_standbymode(oh, idlemode, &v); + } + + _write_sysconfig(v, oh); +} + +/** + * _sysc_shutdown - force a module into idle via OCP_SYSCONFIG + * @oh: struct omap_hwmod * + * + * Force the module into slave idle and master suspend. No return + * value. + */ +static void _sysc_shutdown(struct omap_hwmod *oh) +{ + u32 v; + + if (!oh->sysconfig) + return; + + v = oh->_sysc_cache; + + if (oh->sysconfig->sysc_flags & SYSC_HAS_SIDLEMODE) + _set_slave_idlemode(oh, HWMOD_IDLEMODE_FORCE, &v); + + if (oh->sysconfig->sysc_flags & SYSC_HAS_MIDLEMODE) + _set_master_standbymode(oh, HWMOD_IDLEMODE_FORCE, &v); + + /* XXX clear OCP AUTOIDLE bit? */ + + _write_sysconfig(v, oh); +} + +/** + * _lookup - find an omap_hwmod by name + * @name: find an omap_hwmod by name + * + * Return a pointer to an omap_hwmod by name, or NULL if not found. + * Caller must hold omap_hwmod_mutex. + */ +static struct omap_hwmod *_lookup(const char *name) +{ + struct omap_hwmod *oh, *temp_oh; + + oh = NULL; + + list_for_each_entry(temp_oh, &omap_hwmod_list, node) { + if (!strcmp(name, temp_oh->name)) { + oh = temp_oh; + break; + } + } + + return oh; +} + +/** + * _init_clocks - clk_get() all clocks associated with this hwmod + * @oh: struct omap_hwmod * + * + * Called by omap_hwmod_late_init() (after omap2_clk_init()). + * Resolves all clock names embedded in the hwmod. Must be called + * with omap_hwmod_mutex held. Returns -EINVAL if the omap_hwmod + * has not yet been registered or if the clocks have already been + * initialized, 0 on success, or a non-zero error on failure. + */ +static int _init_clocks(struct omap_hwmod *oh) +{ + int ret = 0; + + if (!oh || (oh->_state != _HWMOD_STATE_REGISTERED)) + return -EINVAL; + + pr_debug("omap_hwmod: %s: looking up clocks\n", oh->name); + + ret |= _init_main_clk(oh); + ret |= _init_interface_clks(oh); + ret |= _init_opt_clks(oh); + + oh->_state = _HWMOD_STATE_CLKS_INITED; + + return ret; +} + +/** + * _wait_target_ready - wait for a module to leave slave idle + * @oh: struct omap_hwmod * + * + * Wait for a module @oh to leave slave idle. Returns 0 if the module + * does not have an IDLEST bit or if the module successfully leaves + * slave idle; otherwise, pass along the return value of the + * appropriate *_cm_wait_module_ready() function. + */ +static int _wait_target_ready(struct omap_hwmod *oh) +{ + struct omap_hwmod_ocp_if *os; + int ret; + + if (!oh) + return -EINVAL; + + if (oh->_int_flags & _HWMOD_NO_MPU_PORT) + return 0; + + os = *oh->slaves + oh->_mpu_port_index; + + if (!(os->flags & OCPIF_HAS_IDLEST)) + return 0; + + /* XXX check module SIDLEMODE */ + + /* XXX check clock enable states */ + + if (cpu_is_omap24xx() || cpu_is_omap34xx()) { + ret = omap2_cm_wait_module_ready(oh->prcm.omap2.module_offs, + oh->prcm.omap2.idlest_reg_id, + oh->prcm.omap2.idlest_idle_bit); +#if 0 + } else if (cpu_is_omap44xx()) { + ret = omap4_cm_wait_module_ready(oh->prcm.omap4.module_offs, + oh->prcm.omap4.device_offs); +#endif + } else { + BUG(); + }; + + return ret; +} + +/** + * _reset - reset an omap_hwmod + * @oh: struct omap_hwmod * + * + * Resets an omap_hwmod @oh via the OCP_SYSCONFIG bit. hwmod must be + * enabled for this to work. Must be called with omap_hwmod_mutex + * held. Returns -EINVAL if the hwmod cannot be reset this way or if + * the hwmod is in the wrong state, -ETIMEDOUT if the module did not + * reset in time, or 0 upon success. + */ +static int _reset(struct omap_hwmod *oh) +{ + u32 r, v; + int c; + + if (!oh->sysconfig || + !(oh->sysconfig->sysc_flags & SYSC_HAS_SOFTRESET) || + (oh->sysconfig->sysc_flags & SYSS_MISSING)) + return -EINVAL; + + /* clocks must be on for this operation */ + if (oh->_state != _HWMOD_STATE_ENABLED) { + WARN(1, "omap_hwmod: %s: reset can only be entered from " + "enabled state\n", oh->name); + return -EINVAL; + } + + pr_debug("omap_hwmod: %s: resetting\n", oh->name); + + v = oh->_sysc_cache; + r = _set_softreset(oh, &v); + if (r) + return r; + _write_sysconfig(v, oh); + + c = 0; + while (c < MAX_MODULE_RESET_WAIT && + !(omap_hwmod_readl(oh, oh->sysconfig->syss_offs) & + SYSS_RESETDONE_MASK)) { + udelay(1); + c++; + } + + if (c == MAX_MODULE_RESET_WAIT) + WARN(1, "omap_hwmod: %s: failed to reset in %d usec\n", + oh->name, MAX_MODULE_RESET_WAIT); + else + pr_debug("omap_hwmod: %s: reset in %d usec\n", oh->name, + MAX_MODULE_RESET_WAIT); + + /* + * XXX add _HWMOD_STATE_WEDGED for modules that don't come back from + * _wait_target_ready() or _reset() + */ + + return (c == MAX_MODULE_RESET_WAIT) ? -ETIMEDOUT : 0; +} + +/** + * _enable - enable an omap_hwmod + * @oh: struct omap_hwmod * + * + * Enables an omap_hwmod @oh such that the MPU can access the hwmod's + * register target. Must be called with omap_hwmod_mutex held. + * Returns -EINVAL if the hwmod is in the wrong state or passes along + * the return value of _wait_target_ready(). + */ +static int _enable(struct omap_hwmod *oh) +{ + int r; + + if (oh->_state != _HWMOD_STATE_INITIALIZED && + oh->_state != _HWMOD_STATE_IDLE && + oh->_state != _HWMOD_STATE_DISABLED) { + WARN(1, "omap_hwmod: %s: enabled state can only be entered " + "from initialized, idle, or disabled state\n", oh->name); + return -EINVAL; + } + + pr_debug("omap_hwmod: %s: enabling\n", oh->name); + + /* XXX mux balls */ + + _add_initiator_dep(oh, mpu_oh); + _enable_clocks(oh); + + if (oh->sysconfig) { + if (!(oh->_int_flags & _HWMOD_SYSCONFIG_LOADED)) + _update_sysc_cache(oh); + _sysc_enable(oh); + } + + r = _wait_target_ready(oh); + if (!r) + oh->_state = _HWMOD_STATE_ENABLED; + + return r; +} + +/** + * _idle - idle an omap_hwmod + * @oh: struct omap_hwmod * + * + * Idles an omap_hwmod @oh. This should be called once the hwmod has + * no further work. Returns -EINVAL if the hwmod is in the wrong + * state or returns 0. + */ +static int _idle(struct omap_hwmod *oh) +{ + if (oh->_state != _HWMOD_STATE_ENABLED) { + WARN(1, "omap_hwmod: %s: idle state can only be entered from " + "enabled state\n", oh->name); + return -EINVAL; + } + + pr_debug("omap_hwmod: %s: idling\n", oh->name); + + if (oh->sysconfig) + _sysc_idle(oh); + _del_initiator_dep(oh, mpu_oh); + _disable_clocks(oh); + + oh->_state = _HWMOD_STATE_IDLE; + + return 0; +} + +/** + * _shutdown - shutdown an omap_hwmod + * @oh: struct omap_hwmod * + * + * Shut down an omap_hwmod @oh. This should be called when the driver + * used for the hwmod is removed or unloaded or if the driver is not + * used by the system. Returns -EINVAL if the hwmod is in the wrong + * state or returns 0. + */ +static int _shutdown(struct omap_hwmod *oh) +{ + if (oh->_state != _HWMOD_STATE_IDLE && + oh->_state != _HWMOD_STATE_ENABLED) { + WARN(1, "omap_hwmod: %s: disabled state can only be entered " + "from idle, or enabled state\n", oh->name); + return -EINVAL; + } + + pr_debug("omap_hwmod: %s: disabling\n", oh->name); + + if (oh->sysconfig) + _sysc_shutdown(oh); + _del_initiator_dep(oh, mpu_oh); + /* XXX what about the other system initiators here? DMA, tesla, d2d */ + _disable_clocks(oh); + /* XXX Should this code also force-disable the optional clocks? */ + + /* XXX mux any associated balls to safe mode */ + + oh->_state = _HWMOD_STATE_DISABLED; + + return 0; +} + +/** + * _write_clockact_lock - set the module's clockactivity bits + * @oh: struct omap_hwmod * + * @clockact: CLOCKACTIVITY field bits + * + * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh + * OCP_SYSCONFIG register. Returns -EINVAL if the hwmod is in the + * wrong state or returns 0. + */ +static int _write_clockact_lock(struct omap_hwmod *oh, u8 clockact) +{ + u32 v; + + if (!oh->sysconfig || + !(oh->sysconfig->sysc_flags & SYSC_HAS_CLOCKACTIVITY)) + return -EINVAL; + + mutex_lock(&omap_hwmod_mutex); + v = oh->_sysc_cache; + _set_clockactivity(oh, clockact, &v); + _write_sysconfig(v, oh); + mutex_unlock(&omap_hwmod_mutex); + + return 0; +} + + +/** + * _setup - do initial configuration of omap_hwmod + * @oh: struct omap_hwmod * + * + * Writes the CLOCKACTIVITY bits @clockact to the hwmod @oh + * OCP_SYSCONFIG register. Must be called with omap_hwmod_mutex + * held. Returns -EINVAL if the hwmod is in the wrong state or returns + * 0. + */ +static int _setup(struct omap_hwmod *oh) +{ + struct omap_hwmod_ocp_if *os; + int i; + + if (!oh) + return -EINVAL; + + /* Set iclk autoidle mode */ + if (oh->slaves_cnt > 0) { + for (i = 0, os = *oh->slaves; i < oh->slaves_cnt; i++, os++) { + struct clk *c = os->_clk; + + if (!c || IS_ERR(c)) + continue; + + if (os->flags & OCPIF_SWSUP_IDLE) { + /* XXX omap_iclk_deny_idle(c); */ + } else { + /* XXX omap_iclk_allow_idle(c); */ + clk_enable(c); + } + } + } + + oh->_state = _HWMOD_STATE_INITIALIZED; + + _enable(oh); + + if (!(oh->flags & HWMOD_INIT_NO_RESET)) + _reset(oh); + + /* XXX OCP AUTOIDLE bit? */ + /* XXX OCP ENAWAKEUP bit? */ + + if (!(oh->flags & HWMOD_INIT_NO_IDLE)) + _idle(oh); + + return 0; +} + + + +/* Public functions */ + +u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs) +{ + return __raw_readl(oh->_rt_va + reg_offs); +} + +void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs) +{ + __raw_writel(v, oh->_rt_va + reg_offs); +} + +/** + * omap_hwmod_register - register a struct omap_hwmod + * @oh: struct omap_hwmod * + * + * Registers the omap_hwmod @oh. Returns -EEXIST if an omap_hwmod already + * has been registered by the same name; -EINVAL if the omap_hwmod is in the + * wrong state, or 0 on success. + * + * XXX The data should be copied into bootmem, so the original data + * should be marked __initdata and freed after init. This would allow + * unneeded omap_hwmods to be freed on multi-OMAP configurations. Note + * that the copy process would be relatively complex due to the large number + * of substructures. + */ +int omap_hwmod_register(struct omap_hwmod *oh) +{ + int ret, ms_id; + + if (!oh || (oh->_state != _HWMOD_STATE_UNKNOWN)) + return -EINVAL; + + mutex_lock(&omap_hwmod_mutex); + + pr_debug("omap_hwmod: %s: registering\n", oh->name); + + if (_lookup(oh->name)) { + ret = -EEXIST; + goto ohr_unlock; + } + + ms_id = _find_mpu_port_index(oh); + if (!IS_ERR_VALUE(ms_id)) { + oh->_mpu_port_index = ms_id; + oh->_rt_va = _find_mpu_rt_base(oh, oh->_mpu_port_index); + } else { + oh->_int_flags |= _HWMOD_NO_MPU_PORT; + } + + list_add_tail(&oh->node, &omap_hwmod_list); + + oh->_state = _HWMOD_STATE_REGISTERED; + + ret = 0; + +ohr_unlock: + mutex_unlock(&omap_hwmod_mutex); + return ret; +} + +/** + * omap_hwmod_lookup - look up a registered omap_hwmod by name + * @name: name of the omap_hwmod to look up + * + * Given a @name of an omap_hwmod, return a pointer to the registered + * struct omap_hwmod *, or NULL upon error. + */ +struct omap_hwmod *omap_hwmod_lookup(const char *name) +{ + struct omap_hwmod *oh; + + if (!name) + return NULL; + + mutex_lock(&omap_hwmod_mutex); + oh = _lookup(name); + mutex_unlock(&omap_hwmod_mutex); + + return oh; +} + +/** + * omap_hwmod_for_each - call function for each registered omap_hwmod + * @fn: pointer to a callback function + * + * Call @fn for each registered omap_hwmod, passing @data to each + * function. @fn must return 0 for success or any other value for + * failure. If @fn returns non-zero, the iteration across omap_hwmods + * will stop and the non-zero return value will be passed to the + * caller of omap_hwmod_for_each(). @fn is called with + * omap_hwmod_for_each() held. + */ +int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh)) +{ + struct omap_hwmod *temp_oh; + int ret; + + if (!fn) + return -EINVAL; + + mutex_lock(&omap_hwmod_mutex); + list_for_each_entry(temp_oh, &omap_hwmod_list, node) { + ret = (*fn)(temp_oh); + if (ret) + break; + } + mutex_unlock(&omap_hwmod_mutex); + + return ret; +} + + +/** + * omap_hwmod_init - init omap_hwmod code and register hwmods + * @ohs: pointer to an array of omap_hwmods to register + * + * Intended to be called early in boot before the clock framework is + * initialized. If @ohs is not null, will register all omap_hwmods + * listed in @ohs that are valid for this chip. Returns -EINVAL if + * omap_hwmod_init() has already been called or 0 otherwise. + */ +int omap_hwmod_init(struct omap_hwmod **ohs) +{ + struct omap_hwmod *oh; + int r; + + if (inited) + return -EINVAL; + + inited = 1; + + if (!ohs) + return 0; + + oh = *ohs; + while (oh) { + if (omap_chip_is(oh->omap_chip)) { + r = omap_hwmod_register(oh); + WARN(r, "omap_hwmod: %s: omap_hwmod_register returned " + "%d\n", oh->name, r); + } + oh = *++ohs; + } + + return 0; +} + +/** + * omap_hwmod_late_init - do some post-clock framework initialization + * + * Must be called after omap2_clk_init(). Resolves the struct clk names + * to struct clk pointers for each registered omap_hwmod. Also calls + * _setup() on each hwmod. Returns 0. + */ +int omap_hwmod_late_init(void) +{ + int r; + + /* XXX check return value */ + r = omap_hwmod_for_each(_init_clocks); + WARN(r, "omap_hwmod: omap_hwmod_late_init(): _init_clocks failed\n"); + + mpu_oh = omap_hwmod_lookup(MPU_INITIATOR_NAME); + WARN(!mpu_oh, "omap_hwmod: could not find MPU initiator hwmod %s\n", + MPU_INITIATOR_NAME); + + omap_hwmod_for_each(_setup); + + return 0; +} + +/** + * omap_hwmod_unregister - unregister an omap_hwmod + * @oh: struct omap_hwmod * + * + * Unregisters a previously-registered omap_hwmod @oh. There's probably + * no use case for this, so it is likely to be removed in a later version. + * + * XXX Free all of the bootmem-allocated structures here when that is + * implemented. Make it clear that core code is the only code that is + * expected to unregister modules. + */ +int omap_hwmod_unregister(struct omap_hwmod *oh) +{ + if (!oh) + return -EINVAL; + + pr_debug("omap_hwmod: %s: unregistering\n", oh->name); + + mutex_lock(&omap_hwmod_mutex); + list_del(&oh->node); + mutex_unlock(&omap_hwmod_mutex); + + return 0; +} + +/** + * omap_hwmod_enable - enable an omap_hwmod + * @oh: struct omap_hwmod * + * + * Enable an omap_hwomd @oh. Intended to be called by omap_device_enable(). + * Returns -EINVAL on error or passes along the return value from _enable(). + */ +int omap_hwmod_enable(struct omap_hwmod *oh) +{ + int r; + + if (!oh) + return -EINVAL; + + mutex_lock(&omap_hwmod_mutex); + r = _enable(oh); + mutex_unlock(&omap_hwmod_mutex); + + return r; +} + +/** + * omap_hwmod_idle - idle an omap_hwmod + * @oh: struct omap_hwmod * + * + * Idle an omap_hwomd @oh. Intended to be called by omap_device_idle(). + * Returns -EINVAL on error or passes along the return value from _idle(). + */ +int omap_hwmod_idle(struct omap_hwmod *oh) +{ + if (!oh) + return -EINVAL; + + mutex_lock(&omap_hwmod_mutex); + _idle(oh); + mutex_unlock(&omap_hwmod_mutex); + + return 0; +} + +/** + * omap_hwmod_shutdown - shutdown an omap_hwmod + * @oh: struct omap_hwmod * + * + * Shutdown an omap_hwomd @oh. Intended to be called by + * omap_device_shutdown(). Returns -EINVAL on error or passes along + * the return value from _shutdown(). + */ +int omap_hwmod_shutdown(struct omap_hwmod *oh) +{ + if (!oh) + return -EINVAL; + + mutex_lock(&omap_hwmod_mutex); + _shutdown(oh); + mutex_unlock(&omap_hwmod_mutex); + + return 0; +} + +/** + * omap_hwmod_enable_clocks - enable main_clk, all interface clocks + * @oh: struct omap_hwmod *oh + * + * Intended to be called by the omap_device code. + */ +int omap_hwmod_enable_clocks(struct omap_hwmod *oh) +{ + mutex_lock(&omap_hwmod_mutex); + _enable_clocks(oh); + mutex_unlock(&omap_hwmod_mutex); + + return 0; +} + +/** + * omap_hwmod_disable_clocks - disable main_clk, all interface clocks + * @oh: struct omap_hwmod *oh + * + * Intended to be called by the omap_device code. + */ +int omap_hwmod_disable_clocks(struct omap_hwmod *oh) +{ + mutex_lock(&omap_hwmod_mutex); + _disable_clocks(oh); + mutex_unlock(&omap_hwmod_mutex); + + return 0; +} + +/** + * omap_hwmod_ocp_barrier - wait for posted writes against the hwmod to complete + * @oh: struct omap_hwmod *oh + * + * Intended to be called by drivers and core code when all posted + * writes to a device must complete before continuing further + * execution (for example, after clearing some device IRQSTATUS + * register bits) + * + * XXX what about targets with multiple OCP threads? + */ +void omap_hwmod_ocp_barrier(struct omap_hwmod *oh) +{ + BUG_ON(!oh); + + if (!oh->sysconfig || !oh->sysconfig->sysc_flags) { + WARN(1, "omap_device: %s: OCP barrier impossible due to " + "device configuration\n", oh->name); + return; + } + + /* + * Forces posted writes to complete on the OCP thread handling + * register writes + */ + omap_hwmod_readl(oh, oh->sysconfig->sysc_offs); +} + +/** + * omap_hwmod_reset - reset the hwmod + * @oh: struct omap_hwmod * + * + * Under some conditions, a driver may wish to reset the entire device. + * Called from omap_device code. Returns -EINVAL on error or passes along + * the return value from _reset()/_enable(). + */ +int omap_hwmod_reset(struct omap_hwmod *oh) +{ + int r; + + if (!oh || !(oh->_state & _HWMOD_STATE_ENABLED)) + return -EINVAL; + + mutex_lock(&omap_hwmod_mutex); + r = _reset(oh); + if (!r) + r = _enable(oh); + mutex_unlock(&omap_hwmod_mutex); + + return r; +} + +/** + * omap_hwmod_count_resources - count number of struct resources needed by hwmod + * @oh: struct omap_hwmod * + * @res: pointer to the first element of an array of struct resource to fill + * + * Count the number of struct resource array elements necessary to + * contain omap_hwmod @oh resources. Intended to be called by code + * that registers omap_devices. Intended to be used to determine the + * size of a dynamically-allocated struct resource array, before + * calling omap_hwmod_fill_resources(). Returns the number of struct + * resource array elements needed. + * + * XXX This code is not optimized. It could attempt to merge adjacent + * resource IDs. + * + */ +int omap_hwmod_count_resources(struct omap_hwmod *oh) +{ + int ret, i; + + ret = oh->mpu_irqs_cnt + oh->sdma_chs_cnt; + + for (i = 0; i < oh->slaves_cnt; i++) + ret += (*oh->slaves + i)->addr_cnt; + + return ret; +} + +/** + * omap_hwmod_fill_resources - fill struct resource array with hwmod data + * @oh: struct omap_hwmod * + * @res: pointer to the first element of an array of struct resource to fill + * + * Fill the struct resource array @res with resource data from the + * omap_hwmod @oh. Intended to be called by code that registers + * omap_devices. See also omap_hwmod_count_resources(). Returns the + * number of array elements filled. + */ +int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res) +{ + int i, j; + int r = 0; + + /* For each IRQ, DMA, memory area, fill in array.*/ + + for (i = 0; i < oh->mpu_irqs_cnt; i++) { + (res + r)->start = *(oh->mpu_irqs + i); + (res + r)->end = *(oh->mpu_irqs + i); + (res + r)->flags = IORESOURCE_IRQ; + r++; + } + + for (i = 0; i < oh->sdma_chs_cnt; i++) { + (res + r)->name = (oh->sdma_chs + i)->name; + (res + r)->start = (oh->sdma_chs + i)->dma_ch; + (res + r)->end = (oh->sdma_chs + i)->dma_ch; + (res + r)->flags = IORESOURCE_DMA; + r++; + } + + for (i = 0; i < oh->slaves_cnt; i++) { + struct omap_hwmod_ocp_if *os; + + os = *oh->slaves + i; + + for (j = 0; j < os->addr_cnt; j++) { + (res + r)->start = (os->addr + j)->pa_start; + (res + r)->end = (os->addr + j)->pa_end; + (res + r)->flags = IORESOURCE_MEM; + r++; + } + } + + return r; +} + +/** + * omap_hwmod_get_pwrdm - return pointer to this module's main powerdomain + * @oh: struct omap_hwmod * + * + * Return the powerdomain pointer associated with the OMAP module + * @oh's main clock. If @oh does not have a main clk, return the + * powerdomain associated with the interface clock associated with the + * module's MPU port. (XXX Perhaps this should use the SDMA port + * instead?) Returns NULL on error, or a struct powerdomain * on + * success. + */ +struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh) +{ + struct clk *c; + + if (!oh) + return NULL; + + if (oh->_clk) { + c = oh->_clk; + } else { + if (oh->_int_flags & _HWMOD_NO_MPU_PORT) + return NULL; + c = oh->slaves[oh->_mpu_port_index]->_clk; + } + + return c->clkdm->pwrdm.ptr; + +} + +/** + * omap_hwmod_add_initiator_dep - add sleepdep from @init_oh to @oh + * @oh: struct omap_hwmod * + * @init_oh: struct omap_hwmod * (initiator) + * + * Add a sleep dependency between the initiator @init_oh and @oh. + * Intended to be called by DSP/Bridge code via platform_data for the + * DSP case; and by the DMA code in the sDMA case. DMA code, *Bridge + * code needs to add/del initiator dependencies dynamically + * before/after accessing a device. Returns the return value from + * _add_initiator_dep(). + * + * XXX Keep a usecount in the clockdomain code + */ +int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh, + struct omap_hwmod *init_oh) +{ + return _add_initiator_dep(oh, init_oh); +} + +/* + * XXX what about functions for drivers to save/restore ocp_sysconfig + * for context save/restore operations? + */ + +/** + * omap_hwmod_del_initiator_dep - remove sleepdep from @init_oh to @oh + * @oh: struct omap_hwmod * + * @init_oh: struct omap_hwmod * (initiator) + * + * Remove a sleep dependency between the initiator @init_oh and @oh. + * Intended to be called by DSP/Bridge code via platform_data for the + * DSP case; and by the DMA code in the sDMA case. DMA code, *Bridge + * code needs to add/del initiator dependencies dynamically + * before/after accessing a device. Returns the return value from + * _del_initiator_dep(). + * + * XXX Keep a usecount in the clockdomain code + */ +int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, + struct omap_hwmod *init_oh) +{ + return _del_initiator_dep(oh, init_oh); +} + +/** + * omap_hwmod_set_clockact_none - set clockactivity test to BOTH + * @oh: struct omap_hwmod * + * + * On some modules, this function can affect the wakeup latency vs. + * power consumption balance. Intended to be called by the + * omap_device layer. Passes along the return value from + * _write_clockact_lock(). + */ +int omap_hwmod_set_clockact_both(struct omap_hwmod *oh) +{ + return _write_clockact_lock(oh, CLOCKACT_TEST_BOTH); +} + +/** + * omap_hwmod_set_clockact_none - set clockactivity test to MAIN + * @oh: struct omap_hwmod * + * + * On some modules, this function can affect the wakeup latency vs. + * power consumption balance. Intended to be called by the + * omap_device layer. Passes along the return value from + * _write_clockact_lock(). + */ +int omap_hwmod_set_clockact_main(struct omap_hwmod *oh) +{ + return _write_clockact_lock(oh, CLOCKACT_TEST_MAIN); +} + +/** + * omap_hwmod_set_clockact_none - set clockactivity test to ICLK + * @oh: struct omap_hwmod * + * + * On some modules, this function can affect the wakeup latency vs. + * power consumption balance. Intended to be called by the + * omap_device layer. Passes along the return value from + * _write_clockact_lock(). + */ +int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh) +{ + return _write_clockact_lock(oh, CLOCKACT_TEST_ICLK); +} + +/** + * omap_hwmod_set_clockact_none - set clockactivity test to NONE + * @oh: struct omap_hwmod * + * + * On some modules, this function can affect the wakeup latency vs. + * power consumption balance. Intended to be called by the + * omap_device layer. Passes along the return value from + * _write_clockact_lock(). + */ +int omap_hwmod_set_clockact_none(struct omap_hwmod *oh) +{ + return _write_clockact_lock(oh, CLOCKACT_TEST_NONE); +} + +/** + * omap_hwmod_enable_wakeup - allow device to wake up the system + * @oh: struct omap_hwmod * + * + * Sets the module OCP socket ENAWAKEUP bit to allow the module to + * send wakeups to the PRCM. Eventually this should sets PRCM wakeup + * registers to cause the PRCM to receive wakeup events from the + * module. Does not set any wakeup routing registers beyond this + * point - if the module is to wake up any other module or subsystem, + * that must be set separately. Called by omap_device code. Returns + * -EINVAL on error or 0 upon success. + */ +int omap_hwmod_enable_wakeup(struct omap_hwmod *oh) +{ + if (!oh->sysconfig || + !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP)) + return -EINVAL; + + mutex_lock(&omap_hwmod_mutex); + _enable_wakeup(oh); + mutex_unlock(&omap_hwmod_mutex); + + return 0; +} + +/** + * omap_hwmod_disable_wakeup - prevent device from waking the system + * @oh: struct omap_hwmod * + * + * Clears the module OCP socket ENAWAKEUP bit to prevent the module + * from sending wakeups to the PRCM. Eventually this should clear + * PRCM wakeup registers to cause the PRCM to ignore wakeup events + * from the module. Does not set any wakeup routing registers beyond + * this point - if the module is to wake up any other module or + * subsystem, that must be set separately. Called by omap_device + * code. Returns -EINVAL on error or 0 upon success. + */ +int omap_hwmod_disable_wakeup(struct omap_hwmod *oh) +{ + if (!oh->sysconfig || + !(oh->sysconfig->sysc_flags & SYSC_HAS_ENAWAKEUP)) + return -EINVAL; + + mutex_lock(&omap_hwmod_mutex); + _disable_wakeup(oh); + mutex_unlock(&omap_hwmod_mutex); + + return 0; +} diff --git a/arch/arm/plat-omap/include/mach/omap_hwmod.h b/arch/arm/plat-omap/include/mach/omap_hwmod.h new file mode 100644 index 00000000000..1f79c20e292 --- /dev/null +++ b/arch/arm/plat-omap/include/mach/omap_hwmod.h @@ -0,0 +1,447 @@ +/* + * omap_hwmod macros, structures + * + * Copyright (C) 2009 Nokia Corporation + * Paul Walmsley + * + * Created in collaboration with (alphabetical order): Benoit Cousson, + * Kevin Hilman, Tony Lindgren, Rajendra Nayak, Vikram Pandita, Sakari + * Poussa, Anand Sawant, Santosh Shilimkar, Richard Woodruff + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * These headers and macros are used to define OMAP on-chip module + * data and their integration with other OMAP modules and Linux. + * + * References: + * - OMAP2420 Multimedia Processor Silicon Revision 2.1.1, 2.2 (SWPU064) + * - OMAP2430 Multimedia Device POP Silicon Revision 2.1 (SWPU090) + * - OMAP34xx Multimedia Device Silicon Revision 3.1 (SWPU108) + * - OMAP4430 Multimedia Device Silicon Revision 1.0 (SWPU140) + * - Open Core Protocol Specification 2.2 + * + * To do: + * - add interconnect error log structures + * - add pinmuxing + * - init_conn_id_bit (CONNID_BIT_VECTOR) + * - implement default hwmod SMS/SDRC flags? + * + */ +#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H +#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_OMAP_HWMOD_H + +#include <linux/kernel.h> +#include <linux/ioport.h> + +#include <mach/cpu.h> + +struct omap_device; + +/* OCP SYSCONFIG bit shifts/masks */ +#define SYSC_MIDLEMODE_SHIFT 12 +#define SYSC_MIDLEMODE_MASK (0x3 << SYSC_MIDLEMODE_SHIFT) +#define SYSC_CLOCKACTIVITY_SHIFT 8 +#define SYSC_CLOCKACTIVITY_MASK (0x3 << SYSC_CLOCKACTIVITY_SHIFT) +#define SYSC_SIDLEMODE_SHIFT 3 +#define SYSC_SIDLEMODE_MASK (0x3 << SYSC_SIDLEMODE_SHIFT) +#define SYSC_ENAWAKEUP_SHIFT 2 +#define SYSC_ENAWAKEUP_MASK (1 << SYSC_ENAWAKEUP_SHIFT) +#define SYSC_SOFTRESET_SHIFT 1 +#define SYSC_SOFTRESET_MASK (1 << SYSC_SOFTRESET_SHIFT) + +/* OCP SYSSTATUS bit shifts/masks */ +#define SYSS_RESETDONE_SHIFT 0 +#define SYSS_RESETDONE_MASK (1 << SYSS_RESETDONE_SHIFT) + +/* Master standby/slave idle mode flags */ +#define HWMOD_IDLEMODE_FORCE (1 << 0) +#define HWMOD_IDLEMODE_NO (1 << 1) +#define HWMOD_IDLEMODE_SMART (1 << 2) + + +/** + * struct omap_hwmod_dma_info - MPU address space handled by the hwmod + * @name: name of the DMA channel (module local name) + * @dma_ch: DMA channel ID + * + * @name should be something short, e.g., "tx" or "rx". It is for use + * by platform_get_resource_byname(). It is defined locally to the + * hwmod. + */ +struct omap_hwmod_dma_info { + const char *name; + u16 dma_ch; +}; + +/** + * struct omap_hwmod_opt_clk - optional clocks used by this hwmod + * @role: "sys", "32k", "tv", etc -- for use in clk_get() + * @clkdev_dev_id: opt clock: clkdev dev_id string + * @clkdev_con_id: opt clock: clkdev con_id string + * @_clk: pointer to the struct clk (filled in at runtime) + * + * The module's interface clock and main functional clock should not + * be added as optional clocks. + */ +struct omap_hwmod_opt_clk { + const char *role; + const char *clkdev_dev_id; + const char *clkdev_con_id; + struct clk *_clk; +}; + + +/* omap_hwmod_omap2_firewall.flags bits */ +#define OMAP_FIREWALL_L3 (1 << 0) +#define OMAP_FIREWALL_L4 (1 << 1) + +/** + * struct omap_hwmod_omap2_firewall - OMAP2/3 device firewall data + * @l3_perm_bit: bit shift for L3_PM_*_PERMISSION_* + * @l4_fw_region: L4 firewall region ID + * @l4_prot_group: L4 protection group ID + * @flags: (see omap_hwmod_omap2_firewall.flags macros above) + */ +struct omap_hwmod_omap2_firewall { + u8 l3_perm_bit; + u8 l4_fw_region; + u8 l4_prot_group; + u8 flags; +}; + + +/* + * omap_hwmod_addr_space.flags bits + * + * ADDR_MAP_ON_INIT: Map this address space during omap_hwmod init. + * ADDR_TYPE_RT: Address space contains module register target data. + */ +#define ADDR_MAP_ON_INIT (1 << 0) +#define ADDR_TYPE_RT (1 << 1) + +/** + * struct omap_hwmod_addr_space - MPU address space handled by the hwmod + * @pa_start: starting physical address + * @pa_end: ending physical address + * @flags: (see omap_hwmod_addr_space.flags macros above) + * + * Address space doesn't necessarily follow physical interconnect + * structure. GPMC is one example. + */ +struct omap_hwmod_addr_space { + u32 pa_start; + u32 pa_end; + u8 flags; +}; + + +/* + * omap_hwmod_ocp_if.user bits: these indicate the initiators that use this + * interface to interact with the hwmod. Used to add sleep dependencies + * when the module is enabled or disabled. + */ +#define OCP_USER_MPU (1 << 0) +#define OCP_USER_SDMA (1 << 1) + +/* omap_hwmod_ocp_if.flags bits */ +#define OCPIF_HAS_IDLEST (1 << 0) +#define OCPIF_SWSUP_IDLE (1 << 1) +#define OCPIF_CAN_BURST (1 << 2) + +/** + * struct omap_hwmod_ocp_if - OCP interface data + * @master: struct omap_hwmod that initiates OCP transactions on this link + * @slave: struct omap_hwmod that responds to OCP transactions on this link + * @addr: address space associated with this link + * @clkdev_dev_id: interface clock: clkdev dev_id string + * @clkdev_con_id: interface clock: clkdev con_id string + * @_clk: pointer to the interface struct clk (filled in at runtime) + * @fw: interface firewall data + * @addr_cnt: ARRAY_SIZE(@addr) + * @width: OCP data width + * @thread_cnt: number of threads + * @max_burst_len: maximum burst length in @width sized words (0 if unlimited) + * @user: initiators using this interface (see OCP_USER_* macros above) + * @flags: OCP interface flags (see OCPIF_* macros above) + * + * It may also be useful to add a tag_cnt field for OCP2.x devices. + * + * Parameter names beginning with an underscore are managed internally by + * the omap_hwmod code and should not be set during initialization. + */ +struct omap_hwmod_ocp_if { + struct omap_hwmod *master; + struct omap_hwmod *slave; + struct omap_hwmod_addr_space *addr; + const char *clkdev_dev_id; + const char *clkdev_con_id; + struct clk *_clk; + union { + struct omap_hwmod_omap2_firewall omap2; + } fw; + u8 addr_cnt; + u8 width; + u8 thread_cnt; + u8 max_burst_len; + u8 user; + u8 flags; +}; + + +/* Macros for use in struct omap_hwmod_sysconfig */ + +/* Flags for use in omap_hwmod_sysconfig.idlemodes */ +#define MASTER_STANDBY_SHIFT 2 +#define SLAVE_IDLE_SHIFT 0 +#define SIDLE_FORCE (HWMOD_IDLEMODE_FORCE << SLAVE_IDLE_SHIFT) +#define SIDLE_NO (HWMOD_IDLEMODE_NO << SLAVE_IDLE_SHIFT) +#define SIDLE_SMART (HWMOD_IDLEMODE_SMART << SLAVE_IDLE_SHIFT) +#define MSTANDBY_FORCE (HWMOD_IDLEMODE_FORCE << MASTER_STANDBY_SHIFT) +#define MSTANDBY_NO (HWMOD_IDLEMODE_NO << MASTER_STANDBY_SHIFT) +#define MSTANDBY_SMART (HWMOD_IDLEMODE_SMART << MASTER_STANDBY_SHIFT) + +/* omap_hwmod_sysconfig.sysc_flags capability flags */ +#define SYSC_HAS_AUTOIDLE (1 << 0) +#define SYSC_HAS_SOFTRESET (1 << 1) +#define SYSC_HAS_ENAWAKEUP (1 << 2) +#define SYSC_HAS_EMUFREE (1 << 3) +#define SYSC_HAS_CLOCKACTIVITY (1 << 4) +#define SYSC_HAS_SIDLEMODE (1 << 5) +#define SYSC_HAS_MIDLEMODE (1 << 6) +#define SYSS_MISSING (1 << 7) + +/* omap_hwmod_sysconfig.clockact flags */ +#define CLOCKACT_TEST_BOTH 0x0 +#define CLOCKACT_TEST_MAIN 0x1 +#define CLOCKACT_TEST_ICLK 0x2 +#define CLOCKACT_TEST_NONE 0x3 + +/** + * struct omap_hwmod_sysconfig - hwmod OCP_SYSCONFIG/OCP_SYSSTATUS data + * @rev_offs: IP block revision register offset (from module base addr) + * @sysc_offs: OCP_SYSCONFIG register offset (from module base addr) + * @syss_offs: OCP_SYSSTATUS register offset (from module base addr) + * @idlemodes: One or more of {SIDLE,MSTANDBY}_{OFF,FORCE,SMART} + * @sysc_flags: SYS{C,S}_HAS* flags indicating SYSCONFIG bits supported + * @clockact: the default value of the module CLOCKACTIVITY bits + * + * @clockact describes to the module which clocks are likely to be + * disabled when the PRCM issues its idle request to the module. Some + * modules have separate clockdomains for the interface clock and main + * functional clock, and can check whether they should acknowledge the + * idle request based on the internal module functionality that has + * been associated with the clocks marked in @clockact. This field is + * only used if HWMOD_SET_DEFAULT_CLOCKACT is set (see below) + * + */ +struct omap_hwmod_sysconfig { + u16 rev_offs; + u16 sysc_offs; + u16 syss_offs; + u8 idlemodes; + u8 sysc_flags; + u8 clockact; +}; + +/** + * struct omap_hwmod_omap2_prcm - OMAP2/3-specific PRCM data + * @module_offs: PRCM submodule offset from the start of the PRM/CM + * @prcm_reg_id: PRCM register ID (e.g., 3 for CM_AUTOIDLE3) + * @module_bit: register bit shift for AUTOIDLE, WKST, WKEN, GRPSEL regs + * @idlest_reg_id: IDLEST register ID (e.g., 3 for CM_IDLEST3) + * @idlest_idle_bit: register bit shift for CM_IDLEST slave idle bit + * @idlest_stdby_bit: register bit shift for CM_IDLEST master standby bit + * + * @prcm_reg_id and @module_bit are specific to the AUTOIDLE, WKST, + * WKEN, GRPSEL registers. In an ideal world, no extra information + * would be needed for IDLEST information, but alas, there are some + * exceptions, so @idlest_reg_id, @idlest_idle_bit, @idlest_stdby_bit + * are needed for the IDLEST registers (c.f. 2430 I2CHS, 3430 USBHOST) + */ +struct omap_hwmod_omap2_prcm { + s16 module_offs; + u8 prcm_reg_id; + u8 module_bit; + u8 idlest_reg_id; + u8 idlest_idle_bit; + u8 idlest_stdby_bit; +}; + + +/** + * struct omap_hwmod_omap4_prcm - OMAP4-specific PRCM data + * @module_offs: PRCM submodule offset from the start of the PRM/CM1/CM2 + * @device_offs: device register offset from @module_offs + * @submodule_wkdep_bit: bit shift of the WKDEP range + */ +struct omap_hwmod_omap4_prcm { + u32 module_offs; + u16 device_offs; + u8 submodule_wkdep_bit; +}; + + +/* + * omap_hwmod.flags definitions + * + * HWMOD_SWSUP_SIDLE: omap_hwmod code should manually bring module in and out + * of idle, rather than relying on module smart-idle + * HWMOD_SWSUP_MSTDBY: omap_hwmod code should manually bring module in and out + * of standby, rather than relying on module smart-standby + * HWMOD_INIT_NO_RESET: don't reset this module at boot - important for + * SDRAM controller, etc. + * HWMOD_INIT_NO_IDLE: don't idle this module at boot - important for SDRAM + * controller, etc. + * HWMOD_SET_DEFAULT_CLOCKACT: program CLOCKACTIVITY bits at startup + */ +#define HWMOD_SWSUP_SIDLE (1 << 0) +#define HWMOD_SWSUP_MSTANDBY (1 << 1) +#define HWMOD_INIT_NO_RESET (1 << 2) +#define HWMOD_INIT_NO_IDLE (1 << 3) +#define HWMOD_SET_DEFAULT_CLOCKACT (1 << 4) + +/* + * omap_hwmod._int_flags definitions + * These are for internal use only and are managed by the omap_hwmod code. + * + * _HWMOD_NO_MPU_PORT: no path exists for the MPU to write to this module + * _HWMOD_WAKEUP_ENABLED: set when the omap_hwmod code has enabled ENAWAKEUP + * _HWMOD_SYSCONFIG_LOADED: set when the OCP_SYSCONFIG value has been cached + */ +#define _HWMOD_NO_MPU_PORT (1 << 0) +#define _HWMOD_WAKEUP_ENABLED (1 << 1) +#define _HWMOD_SYSCONFIG_LOADED (1 << 2) + +/* + * omap_hwmod._state definitions + * + * INITIALIZED: reset (optionally), initialized, enabled, disabled + * (optionally) + * + * + */ +#define _HWMOD_STATE_UNKNOWN 0 +#define _HWMOD_STATE_REGISTERED 1 +#define _HWMOD_STATE_CLKS_INITED 2 +#define _HWMOD_STATE_INITIALIZED 3 +#define _HWMOD_STATE_ENABLED 4 +#define _HWMOD_STATE_IDLE 5 +#define _HWMOD_STATE_DISABLED 6 + +/** + * struct omap_hwmod - integration data for OMAP hardware "modules" (IP blocks) + * @name: name of the hwmod + * @od: struct omap_device currently associated with this hwmod (internal use) + * @mpu_irqs: ptr to an array of MPU IRQs (see also mpu_irqs_cnt) + * @sdma_chs: ptr to an array of SDMA channel IDs (see also sdma_chs_cnt) + * @prcm: PRCM data pertaining to this hwmod + * @clkdev_dev_id: main clock: clkdev dev_id string + * @clkdev_con_id: main clock: clkdev con_id string + * @_clk: pointer to the main struct clk (filled in at runtime) + * @opt_clks: other device clocks that drivers can request (0..*) + * @masters: ptr to array of OCP ifs that this hwmod can initiate on + * @slaves: ptr to array of OCP ifs that this hwmod can respond on + * @sysconfig: device SYSCONFIG/SYSSTATUS register data + * @dev_attr: arbitrary device attributes that can be passed to the driver + * @_sysc_cache: internal-use hwmod flags + * @_rt_va: cached register target start address (internal use) + * @_mpu_port_index: cached MPU register target slave ID (internal use) + * @msuspendmux_reg_id: CONTROL_MSUSPENDMUX register ID (1-6) + * @msuspendmux_shift: CONTROL_MSUSPENDMUX register bit shift + * @mpu_irqs_cnt: number of @mpu_irqs + * @sdma_chs_cnt: number of @sdma_chs + * @opt_clks_cnt: number of @opt_clks + * @master_cnt: number of @master entries + * @slaves_cnt: number of @slave entries + * @response_lat: device OCP response latency (in interface clock cycles) + * @_int_flags: internal-use hwmod flags + * @_state: internal-use hwmod state + * @flags: hwmod flags (documented below) + * @omap_chip: OMAP chips this hwmod is present on + * @node: list node for hwmod list (internal use) + * + * @clkdev_dev_id, @clkdev_con_id, and @clk all refer to this module's "main + * clock," which for our purposes is defined as "the functional clock needed + * for register accesses to complete." Modules may not have a main clock if + * the interface clock also serves as a main clock. + * + * Parameter names beginning with an underscore are managed internally by + * the omap_hwmod code and should not be set during initialization. + */ +struct omap_hwmod { + const char *name; + struct omap_device *od; + u8 *mpu_irqs; + struct omap_hwmod_dma_info *sdma_chs; + union { + struct omap_hwmod_omap2_prcm omap2; + struct omap_hwmod_omap4_prcm omap4; + } prcm; + const char *clkdev_dev_id; + const char *clkdev_con_id; + struct clk *_clk; + struct omap_hwmod_opt_clk *opt_clks; + struct omap_hwmod_ocp_if **masters; /* connect to *_IA */ + struct omap_hwmod_ocp_if **slaves; /* connect to *_TA */ + struct omap_hwmod_sysconfig *sysconfig; + void *dev_attr; + u32 _sysc_cache; + void __iomem *_rt_va; + struct list_head node; + u16 flags; + u8 _mpu_port_index; + u8 msuspendmux_reg_id; + u8 msuspendmux_shift; + u8 response_lat; + u8 mpu_irqs_cnt; + u8 sdma_chs_cnt; + u8 opt_clks_cnt; + u8 masters_cnt; + u8 slaves_cnt; + u8 hwmods_cnt; + u8 _int_flags; + u8 _state; + const struct omap_chip_id omap_chip; +}; + +int omap_hwmod_init(struct omap_hwmod **ohs); +int omap_hwmod_register(struct omap_hwmod *oh); +int omap_hwmod_unregister(struct omap_hwmod *oh); +struct omap_hwmod *omap_hwmod_lookup(const char *name); +int omap_hwmod_for_each(int (*fn)(struct omap_hwmod *oh)); +int omap_hwmod_late_init(void); + +int omap_hwmod_enable(struct omap_hwmod *oh); +int omap_hwmod_idle(struct omap_hwmod *oh); +int omap_hwmod_shutdown(struct omap_hwmod *oh); + +int omap_hwmod_enable_clocks(struct omap_hwmod *oh); +int omap_hwmod_disable_clocks(struct omap_hwmod *oh); + +int omap_hwmod_reset(struct omap_hwmod *oh); +void omap_hwmod_ocp_barrier(struct omap_hwmod *oh); + +void omap_hwmod_writel(u32 v, struct omap_hwmod *oh, u16 reg_offs); +u32 omap_hwmod_readl(struct omap_hwmod *oh, u16 reg_offs); + +int omap_hwmod_count_resources(struct omap_hwmod *oh); +int omap_hwmod_fill_resources(struct omap_hwmod *oh, struct resource *res); + +struct powerdomain *omap_hwmod_get_pwrdm(struct omap_hwmod *oh); + +int omap_hwmod_add_initiator_dep(struct omap_hwmod *oh, + struct omap_hwmod *init_oh); +int omap_hwmod_del_initiator_dep(struct omap_hwmod *oh, + struct omap_hwmod *init_oh); + +int omap_hwmod_set_clockact_both(struct omap_hwmod *oh); +int omap_hwmod_set_clockact_main(struct omap_hwmod *oh); +int omap_hwmod_set_clockact_iclk(struct omap_hwmod *oh); +int omap_hwmod_set_clockact_none(struct omap_hwmod *oh); + +int omap_hwmod_enable_wakeup(struct omap_hwmod *oh); +int omap_hwmod_disable_wakeup(struct omap_hwmod *oh); + +#endif |