diff options
| -rw-r--r-- | arch/powerpc/boot/dts/mpc8315erdb.dts | 287 |
1 files changed, 287 insertions, 0 deletions
diff --git a/arch/powerpc/boot/dts/mpc8315erdb.dts b/arch/powerpc/boot/dts/mpc8315erdb.dts new file mode 100644 index 00000000000..e157f2342ea --- /dev/null +++ b/arch/powerpc/boot/dts/mpc8315erdb.dts @@ -0,0 +1,287 @@ +/* + * MPC8315E RDB Device Tree Source + * + * Copyright 2007 Freescale Semiconductor Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +/dts-v1/; + +/ { + compatible = "fsl,mpc8315erdb"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + ethernet0 = &enet0; + ethernet1 = &enet1; + serial0 = &serial0; + serial1 = &serial1; + pci0 = &pci0; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + PowerPC,8315@0 { + device_type = "cpu"; + reg = <0>; + d-cache-line-size = <32>; + i-cache-line-size = <32>; + d-cache-size = <16384>; + i-cache-size = <16384>; + timebase-frequency = <0>; // from bootloader + bus-frequency = <0>; // from bootloader + clock-frequency = <0>; // from bootloader + }; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x08000000>; // 128MB at 0 + }; + + localbus@e0005000 { + #address-cells = <2>; + #size-cells = <1>; + compatible = "fsl,mpc8315-elbc", "fsl,elbc", "simple-bus"; + reg = <0xe0005000 0x1000>; + interrupts = <77 8>; + interrupt-parent = <&ipic>; + + // CS0 and CS1 are swapped when + // booting from nand, but the + // addresses are the same. + ranges = <0 0 0xfe000000 0x00800000 + 1 0 0xe0600000 0x00002000 + 2 0 0xf0000000 0x00020000 + 3 0 0xfa000000 0x00008000>; + + flash@0,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "cfi-flash"; + reg = <0 0 0x800000>; + bank-width = <2>; + device-width = <1>; + }; + + nand@1,0 { + #address-cells = <1>; + #size-cells = <1>; + compatible = "fsl,mpc8315-fcm-nand", + "fsl,elbc-fcm-nand"; + reg = <1 0 0x2000>; + + u-boot@0 { + reg = <0x0 0x100000>; + read-only; + }; + + kernel@100000 { + reg = <0x100000 0x300000>; + }; + fs@400000 { + reg = <0x400000 0x1c00000>; + }; + }; + }; + + immr@e0000000 { + #address-cells = <1>; + #size-cells = <1>; + device_type = "soc"; + compatible = "simple-bus"; + ranges = <0 0xe0000000 0x00100000>; + reg = <0xe0000000 0x00000200>; + bus-frequency = <0>; + + wdt@200 { + device_type = "watchdog"; + compatible = "mpc83xx_wdt"; + reg = <0x200 0x100>; + }; + + i2c@3000 { + #address-cells = <1>; + #size-cells = <0>; + cell-index = <0>; + compatible = "fsl-i2c"; + reg = <0x3000 0x100>; + interrupts = <14 8>; + interrupt-parent = < &ipic >; + dfsrr; + rtc@68 { + device_type = "rtc"; + compatible = "dallas,ds1339"; + reg = <0x68>; + }; + }; + + spi@7000 { + cell-index = <0>; + compatible = "fsl,spi"; + reg = <0x7000 0x1000>; + interrupts = <16 8>; + interrupt-parent = < &ipic >; + mode = "cpu"; + }; + + usb@23000 { + compatible = "fsl-usb2-dr"; + reg = <0x23000 0x1000>; + #address-cells = <1>; + #size-cells = <0>; + interrupt-parent = < &ipic >; + interrupts = <38 8>; + phy_type = "utmi"; + }; + + mdio@24520 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "fsl,gianfar-mdio"; + reg = <0x24520 0x20>; + phy0: ethernet-phy@0 { + interrupt-parent = < &ipic >; + interrupts = <20 8>; + reg = <0>; + device_type = "ethernet-phy"; + }; + phy1: ethernet-phy@1 { + interrupt-parent = < &ipic >; + interrupts = <19 8>; + reg = <1>; + device_type = "ethernet-phy"; + }; + }; + + enet0: ethernet@24000 { + cell-index = <0>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x24000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <32 8 33 8 34 8>; + interrupt-parent = < &ipic >; + phy-handle = < &phy0 >; + }; + + enet1: ethernet@25000 { + cell-index = <1>; + device_type = "network"; + model = "eTSEC"; + compatible = "gianfar"; + reg = <0x25000 0x1000>; + local-mac-address = [ 00 00 00 00 00 00 ]; + interrupts = <35 8 36 8 37 8>; + interrupt-parent = < &ipic >; + phy-handle = < &phy1 >; + }; + + serial0: serial@4500 { + cell-index = <0>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4500 0x100>; + clock-frequency = <0>; + interrupts = <9 8>; + interrupt-parent = < &ipic >; + }; + + serial1: serial@4600 { + cell-index = <1>; + device_type = "serial"; + compatible = "ns16550"; + reg = <0x4600 0x100>; + clock-frequency = <0>; + interrupts = <10 8>; + interrupt-parent = < &ipic >; + }; + + crypto@30000 { + model = "SEC3"; + device_type = "crypto"; + compatible = "talitos"; + reg = <0x30000 0x10000>; + interrupts = <11 8>; + interrupt-parent = < &ipic >; + /* Rev. 3.0 geometry */ + num-channels = <4>; + channel-fifo-len = <24>; + exec-units-mask = <0x000001fe>; + descriptor-types-mask = <0x03ab0ebf>; + }; + + sata@18000 { + compatible = "fsl,mpc8315-sata", "fsl,pq-sata"; + reg = <0x18000 0x1000>; + cell-index = <1>; + interrupts = <44 8>; + interrupt-parent = < &ipic >; + }; + + sata@19000 { + compatible = "fsl,mpc8315-sata", "fsl,pq-sata"; + reg = <0x19000 0x1000>; + cell-index = <2>; + interrupts = <45 8>; + interrupt-parent = < &ipic >; + }; + + /* IPIC + * interrupts cell = <intr #, sense> + * sense values match linux IORESOURCE_IRQ_* defines: + * sense == 8: Level, low assertion + * sense == 2: Edge, high-to-low change + */ + ipic: interrupt-controller@700 { + interrupt-controller; + #address-cells = <0>; + #interrupt-cells = <2>; + reg = <0x700 0x100>; + device_type = "ipic"; + }; + }; + + pci0: pci@e0008500 { + interrupt-map-mask = <0xf800 0 0 7>; + interrupt-map = < + /* IDSEL 0x0E -mini PCI */ + 0x7000 0 0 1 &ipic 18 8 + 0x7000 0 0 2 &ipic 18 8 + 0x7000 0 0 3 &ipic 18 8 + 0x7000 0 0 4 &ipic 18 8 + + /* IDSEL 0x0F -mini PCI */ + 0x7800 0 0 1 &ipic 17 8 + 0x7800 0 0 2 &ipic 17 8 + 0x7800 0 0 3 &ipic 17 8 + 0x7800 0 0 4 &ipic 17 8 + + /* IDSEL 0x10 - PCI slot */ + 0x8000 0 0 1 &ipic 48 8 + 0x8000 0 0 2 &ipic 17 8 + 0x8000 0 0 3 &ipic 48 8 + 0x8000 0 0 4 &ipic 17 8>; + interrupt-parent = < &ipic >; + interrupts = <66 8>; + bus-range = <0 0>; + ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000 + 0x42000000 0 0x80000000 0x80000000 0 0x10000000 + 0x01000000 0 0x00000000 0xe0300000 0 0x00100000>; + clock-frequency = <66666666>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + reg = <0xe0008500 0x100>; + compatible = "fsl,mpc8349-pci"; + device_type = "pci"; + }; +}; |