aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/i2c/busses/i2c-piix42
-rw-r--r--drivers/i2c/busses/Kconfig2
-rw-r--r--drivers/i2c/busses/i2c-piix4.c8
-rw-r--r--drivers/net/sfc/sfe4001.c4
-rw-r--r--include/linux/i2c.h18
-rw-r--r--include/linux/pci_ids.h2
6 files changed, 27 insertions, 9 deletions
diff --git a/Documentation/i2c/busses/i2c-piix4 b/Documentation/i2c/busses/i2c-piix4
index c5b37c57055..ac540c71c7e 100644
--- a/Documentation/i2c/busses/i2c-piix4
+++ b/Documentation/i2c/busses/i2c-piix4
@@ -8,7 +8,7 @@ Supported adapters:
Datasheet: Only available via NDA from ServerWorks
* ATI IXP200, IXP300, IXP400, SB600, SB700 and SB800 southbridges
Datasheet: Not publicly available
- * AMD SB900
+ * AMD Hudson-2
Datasheet: Not publicly available
* Standard Microsystems (SMSC) SLC90E66 (Victory66) southbridge
Datasheet: Publicly available at the SMSC website http://www.smsc.com
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index 737335ff2b2..e8fe7f169e2 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -128,7 +128,7 @@ config I2C_PIIX4
ATI SB600
ATI SB700
ATI SB800
- AMD SB900
+ AMD Hudson-2
Serverworks OSB4
Serverworks CSB5
Serverworks CSB6
diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c
index d26a972aaca..1e245e9cad3 100644
--- a/drivers/i2c/busses/i2c-piix4.c
+++ b/drivers/i2c/busses/i2c-piix4.c
@@ -22,7 +22,7 @@
Intel PIIX4, 440MX
Serverworks OSB4, CSB5, CSB6, HT-1000, HT-1100
ATI IXP200, IXP300, IXP400, SB600, SB700, SB800
- AMD SB900
+ AMD Hudson-2
SMSC Victory66
Note: we assume there can only be one device, with one SMBus interface.
@@ -233,9 +233,9 @@ static int __devinit piix4_setup_sb800(struct pci_dev *PIIX4_dev,
unsigned short smba_idx = 0xcd6;
u8 smba_en_lo, smba_en_hi, i2ccfg, i2ccfg_offset = 0x10, smb_en = 0x2c;
- /* SB800 SMBus does not support forcing address */
+ /* SB800 and later SMBus does not support forcing address */
if (force || force_addr) {
- dev_err(&PIIX4_dev->dev, "SB800 SMBus does not support "
+ dev_err(&PIIX4_dev->dev, "SMBus does not support "
"forcing address!\n");
return -EINVAL;
}
@@ -480,7 +480,7 @@ static struct pci_device_id piix4_ids[] = {
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP300_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_IXP400_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_ATI, PCI_DEVICE_ID_ATI_SBX00_SMBUS) },
- { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_SB900_SMBUS) },
+ { PCI_DEVICE(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_HUDSON2_SMBUS) },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
PCI_DEVICE_ID_SERVERWORKS_OSB4) },
{ PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS,
diff --git a/drivers/net/sfc/sfe4001.c b/drivers/net/sfc/sfe4001.c
index cee00ad49b5..49eb91b5f50 100644
--- a/drivers/net/sfc/sfe4001.c
+++ b/drivers/net/sfc/sfe4001.c
@@ -188,7 +188,7 @@ static int sfn4111t_reset(struct efx_nic *efx)
efx_oword_t reg;
/* GPIO 3 and the GPIO register are shared with I2C, so block that */
- mutex_lock(&efx->i2c_adap.bus_lock);
+ i2c_lock_adapter(&efx->i2c_adap);
/* Pull RST_N (GPIO 2) low then let it up again, setting the
* FLASH_CFG_1 strap (GPIO 3) appropriately. Only change the
@@ -204,7 +204,7 @@ static int sfn4111t_reset(struct efx_nic *efx)
falcon_write(efx, &reg, GPIO_CTL_REG_KER);
msleep(1);
- mutex_unlock(&efx->i2c_adap.bus_lock);
+ i2c_unlock_adapter(&efx->i2c_adap);
ssleep(1);
return 0;
diff --git a/include/linux/i2c.h b/include/linux/i2c.h
index 57d41b0abce..7b40cda57a7 100644
--- a/include/linux/i2c.h
+++ b/include/linux/i2c.h
@@ -361,6 +361,24 @@ static inline void i2c_set_adapdata(struct i2c_adapter *dev, void *data)
dev_set_drvdata(&dev->dev, data);
}
+/**
+ * i2c_lock_adapter - Prevent access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ */
+static inline void i2c_lock_adapter(struct i2c_adapter *adapter)
+{
+ mutex_lock(&adapter->bus_lock);
+}
+
+/**
+ * i2c_unlock_adapter - Reauthorize access to an I2C bus segment
+ * @adapter: Target I2C bus segment
+ */
+static inline void i2c_unlock_adapter(struct i2c_adapter *adapter)
+{
+ mutex_unlock(&adapter->bus_lock);
+}
+
/*flags for the client struct: */
#define I2C_CLIENT_PEC 0x04 /* Use Packet Error Checking */
#define I2C_CLIENT_TEN 0x10 /* we have a ten bit chip address */
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index b0f0f3851cd..9ceb392cb98 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -543,7 +543,7 @@
#define PCI_DEVICE_ID_AMD_8131_BRIDGE 0x7450
#define PCI_DEVICE_ID_AMD_8131_APIC 0x7451
#define PCI_DEVICE_ID_AMD_8132_BRIDGE 0x7458
-#define PCI_DEVICE_ID_AMD_SB900_SMBUS 0x780b
+#define PCI_DEVICE_ID_AMD_HUDSON2_SMBUS 0x780b
#define PCI_DEVICE_ID_AMD_CS5535_IDE 0x208F
#define PCI_DEVICE_ID_AMD_CS5536_ISA 0x2090
#define PCI_DEVICE_ID_AMD_CS5536_FLASH 0x2091