diff options
-rw-r--r-- | drivers/ata/Kconfig | 2 | ||||
-rw-r--r-- | drivers/ata/sata_mv.c | 132 |
2 files changed, 75 insertions, 59 deletions
diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index ae19c9b30d1..ba8f7f4dfa1 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -69,7 +69,7 @@ config ATA_PIIX config SATA_MV tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" - depends on PCI && EXPERIMENTAL + depends on EXPERIMENTAL help This option enables support for the Marvell Serial ATA family. Currently supports 88SX[56]0[48][01] chips. diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 38d4d08283e..3c1b5c9027d 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -127,6 +127,9 @@ enum { /* Host Flags */ MV_FLAG_DUAL_HC = (1 << 30), /* two SATA Host Controllers */ MV_FLAG_IRQ_COALESCE = (1 << 29), /* IRQ coalescing capability */ + /* SoC integrated controllers, no PCI interface */ + MV_FLAG_SOC = (1 << 28), + MV_COMMON_FLAGS = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | ATA_FLAG_MMIO | ATA_FLAG_NO_ATAPI | ATA_FLAG_PIO_POLLING, @@ -340,6 +343,7 @@ enum { #define IS_GEN_I(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_I) #define IS_GEN_II(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_II) #define IS_GEN_IIE(hpriv) ((hpriv)->hp_flags & MV_HP_GEN_IIE) +#define HAS_PCI(host) (!((host)->ports[0]->flags & MV_FLAG_SOC)) enum { /* DMA boundary 0xffff is required by the s/g splitting @@ -442,7 +446,7 @@ struct mv_hw_ops { int (*reset_hc)(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int n_hc); void (*reset_flash)(struct mv_host_priv *hpriv, void __iomem *mmio); - void (*reset_bus)(struct pci_dev *pdev, void __iomem *mmio); + void (*reset_bus)(struct ata_host *host, void __iomem *mmio); }; static void mv_irq_clear(struct ata_port *ap); @@ -459,7 +463,6 @@ static void mv_error_handler(struct ata_port *ap); static void mv_eh_freeze(struct ata_port *ap); static void mv_eh_thaw(struct ata_port *ap); static void mv6_dev_config(struct ata_device *dev); -static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); static void mv5_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int port); @@ -469,7 +472,7 @@ static void mv5_read_preamp(struct mv_host_priv *hpriv, int idx, static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int n_hc); static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); -static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio); +static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio); static void mv6_phy_errata(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int port); @@ -479,7 +482,7 @@ static void mv6_read_preamp(struct mv_host_priv *hpriv, int idx, static int mv6_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int n_hc); static void mv6_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio); -static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio); +static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio); static void mv_channel_reset(struct mv_host_priv *hpriv, void __iomem *mmio, unsigned int port_no); static void mv_edma_cfg(struct mv_port_priv *pp, struct mv_host_priv *hpriv, @@ -690,13 +693,6 @@ static const struct pci_device_id mv_pci_tbl[] = { { } /* terminate list */ }; -static struct pci_driver mv_pci_driver = { - .name = DRV_NAME, - .id_table = mv_pci_tbl, - .probe = mv_init_one, - .remove = ata_pci_remove_one, -}; - static const struct mv_hw_ops mv5xxx_ops = { .phy_errata = mv5_phy_errata, .enable_leds = mv5_enable_leds, @@ -716,45 +712,6 @@ static const struct mv_hw_ops mv6xxx_ops = { }; /* - * module options - */ -static int msi; /* Use PCI msi; either zero (off, default) or non-zero */ - - -/* move to PCI layer or libata core? */ -static int pci_go_64(struct pci_dev *pdev) -{ - int rc; - - if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { - rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); - if (rc) { - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "64-bit DMA enable failed\n"); - return rc; - } - } - } else { - rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit DMA enable failed\n"); - return rc; - } - rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); - if (rc) { - dev_printk(KERN_ERR, &pdev->dev, - "32-bit consistent DMA enable failed\n"); - return rc; - } - } - - return rc; -} - -/* * Functions */ @@ -1823,7 +1780,7 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) n_hcs = mv_get_hc_count(host->ports[0]->flags); - if (unlikely(irq_stat & PCI_ERR)) { + if (unlikely((irq_stat & PCI_ERR) && HAS_PCI(host))) { mv_pci_error(host, mmio); handled = 1; goto out_unlock; /* skip all other HC irq handling */ @@ -1894,8 +1851,9 @@ static int mv5_scr_write(struct ata_port *ap, unsigned int sc_reg_in, u32 val) return -EINVAL; } -static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio) +static void mv5_reset_bus(struct ata_host *host, void __iomem *mmio) { + struct pci_dev *pdev = to_pci_dev(host->dev); int early_5080; early_5080 = (pdev->device == 0x5080) && (pdev->revision == 0); @@ -1906,7 +1864,7 @@ static void mv5_reset_bus(struct pci_dev *pdev, void __iomem *mmio) writel(tmp, mmio + MV_PCI_EXP_ROM_BAR_CTL); } - mv_reset_pci_bus(pdev, mmio); + mv_reset_pci_bus(host, mmio); } static void mv5_reset_flash(struct mv_host_priv *hpriv, void __iomem *mmio) @@ -2030,9 +1988,8 @@ static int mv5_reset_hc(struct mv_host_priv *hpriv, void __iomem *mmio, #undef ZERO #define ZERO(reg) writel(0, mmio + (reg)) -static void mv_reset_pci_bus(struct pci_dev *pdev, void __iomem *mmio) +static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio) { - struct ata_host *host = dev_get_drvdata(&pdev->dev); struct mv_host_priv *hpriv = host->private_data; u32 tmp; @@ -2676,7 +2633,6 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx) static int mv_init_host(struct ata_host *host, unsigned int board_idx) { int rc = 0, n_hc, port, hc; - struct pci_dev *pdev = to_pci_dev(host->dev); void __iomem *mmio = host->iomap[MV_PRIMARY_BAR]; struct mv_host_priv *hpriv = host->private_data; @@ -2697,7 +2653,7 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) goto done; hpriv->ops->reset_flash(hpriv, mmio); - hpriv->ops->reset_bus(pdev, mmio); + hpriv->ops->reset_bus(host, mmio); hpriv->ops->enable_leds(hpriv, mmio); for (port = 0; port < host->n_ports; port++) { @@ -2720,8 +2676,10 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) mv_port_init(&ap->ioaddr, port_mmio); +#ifdef CONFIG_PCI ata_port_pbar_desc(ap, MV_PRIMARY_BAR, -1, "mmio"); ata_port_pbar_desc(ap, MV_PRIMARY_BAR, offset, "port"); +#endif } for (hc = 0; hc < n_hc; hc++) { @@ -2758,6 +2716,55 @@ done: return rc; } +#ifdef CONFIG_PCI +static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent); + +static struct pci_driver mv_pci_driver = { + .name = DRV_NAME, + .id_table = mv_pci_tbl, + .probe = mv_init_one, + .remove = ata_pci_remove_one, +}; + +/* + * module options + */ +static int msi; /* Use PCI msi; either zero (off, default) or non-zero */ + + +/* move to PCI layer or libata core? */ +static int pci_go_64(struct pci_dev *pdev) +{ + int rc; + + if (!pci_set_dma_mask(pdev, DMA_64BIT_MASK)) { + rc = pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); + if (rc) { + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "64-bit DMA enable failed\n"); + return rc; + } + } + } else { + rc = pci_set_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit DMA enable failed\n"); + return rc; + } + rc = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK); + if (rc) { + dev_printk(KERN_ERR, &pdev->dev, + "32-bit consistent DMA enable failed\n"); + return rc; + } + } + + return rc; +} + /** * mv_print_info - Dump key info to kernel log for perusal. * @host: ATA host to print info about @@ -2886,15 +2893,22 @@ static int mv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) return ata_host_activate(host, pdev->irq, mv_interrupt, IRQF_SHARED, IS_GEN_I(hpriv) ? &mv5_sht : &mv6_sht); } +#endif static int __init mv_init(void) { - return pci_register_driver(&mv_pci_driver); + int rc = -ENODEV; +#ifdef CONFIG_PCI + rc = pci_register_driver(&mv_pci_driver); +#endif + return rc; } static void __exit mv_exit(void) { +#ifdef CONFIG_PCI pci_unregister_driver(&mv_pci_driver); +#endif } MODULE_AUTHOR("Brett Russ"); @@ -2903,8 +2917,10 @@ MODULE_LICENSE("GPL"); MODULE_DEVICE_TABLE(pci, mv_pci_tbl); MODULE_VERSION(DRV_VERSION); +#ifdef CONFIG_PCI module_param(msi, int, 0444); MODULE_PARM_DESC(msi, "Enable use of PCI MSI (0=off, 1=on)"); +#endif module_init(mv_init); module_exit(mv_exit); |