aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--net/mac80211/rc80211_pid.c181
1 files changed, 161 insertions, 20 deletions
diff --git a/net/mac80211/rc80211_pid.c b/net/mac80211/rc80211_pid.c
index b358824b5ac..1116dc67ddd 100644
--- a/net/mac80211/rc80211_pid.c
+++ b/net/mac80211/rc80211_pid.c
@@ -2,6 +2,7 @@
* Copyright 2002-2005, Instant802 Networks, Inc.
* Copyright 2005, Devicescape Software, Inc.
* Copyright 2007, Mattias Nissler <mattias.nissler@gmx.de>
+ * Copyright 2007, Stefano Brivio <stefano.brivio@polimi.it>
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -39,12 +40,18 @@
* an actual sliding window. The advantage is that we don't need to keep an
* array of the last N error values and computation is easier.
*
- * Once we have the adj value, we need to map it to a TX rate to be selected.
- * For now, we depend on the rates to be ordered in a way such that more robust
- * rates (i.e. such that exhibit a lower framed failed percentage) come first.
- * E.g. for the 802.11b/g case, we first have the b rates in ascending order,
- * then the g rates. The adj simply decides the index of the TX rate in the list
- * to switch to (relative to the current TX rate entry).
+ * Once we have the adj value, we map it to a rate by means of a learning
+ * algorithm. This algorithm keeps the state of the percentual failed frames
+ * difference between rates. The behaviour of the lowest available rate is kept
+ * as a reference value, and every time we switch between two rates, we compute
+ * the difference between the failed frames each rate exhibited. By doing so,
+ * we compare behaviours which different rates exhibited in adjacent timeslices,
+ * thus the comparison is minimally affected by external conditions. This
+ * difference gets propagated to the whole set of measurements, so that the
+ * reference is always the same. Periodically, we normalize this set so that
+ * recent events weigh the most. By comparing the adj value with this set, we
+ * avoid pejorative switches to lower rates and allow for switches to higher
+ * rates if they behaved well.
*
* Note that for the computations we use a fixed-point representation to avoid
* floating point arithmetic. Hence, all values are shifted left by
@@ -78,6 +85,16 @@
*/
#define RC_PID_TARGET_PF (11 << RC_PID_ARITH_SHIFT)
+/* Rate behaviour normalization quantity over time. */
+#define RC_PID_NORM_OFFSET 3
+
+/* Push high rates right after loading. */
+#define RC_PID_FAST_START 0
+
+/* Arithmetic right shift for positive and negative values for ISO C. */
+#define RC_PID_DO_ARITH_RIGHT_SHIFT(x, y) \
+ (x) < 0 ? -((-(x)) >> (y)) : (x) >> (y)
+
struct rc_pid_sta_info {
unsigned long last_change;
unsigned long last_sample;
@@ -121,6 +138,18 @@ struct rc_pid_sta_info {
/* Algorithm parameters. We keep them on a per-algorithm approach, so they can
* be tuned individually for each interface.
*/
+struct rc_pid_rateinfo {
+
+ /* Map sorted rates to rates in ieee80211_hw_mode. */
+ int index;
+
+ /* Map rates in ieee80211_hw_mode to sorted rates. */
+ int rev_index;
+
+ /* Comparison with the lowest rate. */
+ int diff;
+};
+
struct rc_pid_info {
/* The failed frames percentage target. */
@@ -130,15 +159,56 @@ struct rc_pid_info {
s32 coeff_p;
s32 coeff_i;
s32 coeff_d;
+
+ /* Rates information. */
+ struct rc_pid_rateinfo *rinfo;
+
+ /* Index of the last used rate. */
+ int oldrate;
};
+/* Shift the adjustment so that we won't switch to a lower rate if it exhibited
+ * a worse failed frames behaviour and we'll choose the highest rate whose
+ * failed frames behaviour is not worse than the one of the original rate
+ * target. While at it, check that the adjustment is within the ranges. Then,
+ * provide the new rate index. */
+static int rate_control_pid_shift_adjust(struct rc_pid_rateinfo *r,
+ int adj, int cur, int l)
+{
+ int i, j, k, tmp;
+
+ if (cur + adj < 0)
+ return 0;
+ if (cur + adj >= l)
+ return l - 1;
+
+ i = r[cur + adj].rev_index;
+
+ j = r[cur].rev_index;
+
+ if (adj < 0) {
+ tmp = i;
+ for (k = j; k >= i; k--)
+ if (r[k].diff <= r[j].diff)
+ tmp = k;
+ return r[tmp].index;
+ } else if (adj > 0) {
+ tmp = i;
+ for (k = i + 1; k + i < l; k++)
+ if (r[k].diff <= r[i].diff)
+ tmp = k;
+ return r[tmp].index;
+ }
+ return cur + adj;
+}
static void rate_control_pid_adjust_rate(struct ieee80211_local *local,
- struct sta_info *sta, int adj)
+ struct sta_info *sta, int adj,
+ struct rc_pid_rateinfo *rinfo)
{
struct ieee80211_sub_if_data *sdata;
struct ieee80211_hw_mode *mode;
- int newidx = sta->txrate + adj;
+ int newidx;
int maxrate;
int back = (adj > 0) ? 1 : -1;
@@ -151,10 +221,8 @@ static void rate_control_pid_adjust_rate(struct ieee80211_local *local,
mode = local->oper_hw_mode;
maxrate = sdata->bss ? sdata->bss->max_ratectrl_rateidx : -1;
- if (newidx < 0)
- newidx = 0;
- else if (newidx >= mode->num_rates)
- newidx = mode->num_rates - 1;
+ newidx = rate_control_pid_shift_adjust(rinfo, adj, sta->txrate,
+ mode->num_rates);
while (newidx != sta->txrate) {
if (rate_supported(sta, mode, newidx) &&
@@ -167,18 +235,37 @@ static void rate_control_pid_adjust_rate(struct ieee80211_local *local,
}
}
+/* Normalize the failed frames per-rate differences. */
+static void rate_control_pid_normalize(struct rc_pid_rateinfo *r, int l)
+{
+ int i;
+
+ if (r[0].diff > RC_PID_NORM_OFFSET)
+ r[0].diff -= RC_PID_NORM_OFFSET;
+ else if (r[0].diff < -RC_PID_NORM_OFFSET)
+ r[0].diff += RC_PID_NORM_OFFSET;
+ for (i = 0; i < l - 1; i++)
+ if (r[i + 1].diff > r[i].diff + RC_PID_NORM_OFFSET)
+ r[i + 1].diff -= RC_PID_NORM_OFFSET;
+ else if (r[i + 1].diff <= r[i].diff)
+ r[i + 1].diff += RC_PID_NORM_OFFSET;
+}
+
static void rate_control_pid_sample(struct rc_pid_info *pinfo,
struct ieee80211_local *local,
struct sta_info *sta)
{
struct rc_pid_sta_info *spinfo = sta->rate_ctrl_priv;
+ struct rc_pid_rateinfo *rinfo = pinfo->rinfo;
+ struct ieee80211_hw_mode *mode;
u32 pf;
s32 err_avg;
s32 err_prop;
s32 err_int;
s32 err_der;
- int adj;
+ int adj, i, j, tmp;
+ mode = local->oper_hw_mode;
spinfo = sta->rate_ctrl_priv;
spinfo->last_sample = jiffies;
@@ -194,6 +281,20 @@ static void rate_control_pid_sample(struct rc_pid_info *pinfo,
spinfo->tx_num_failed = 0;
}
+ /* If we just switched rate, update the rate behaviour info. */
+ if (pinfo->oldrate != sta->txrate) {
+
+ i = rinfo[pinfo->oldrate].rev_index;
+ j = rinfo[sta->txrate].rev_index;
+
+ tmp = (pf - spinfo->last_pf);
+ tmp = RC_PID_DO_ARITH_RIGHT_SHIFT(tmp, RC_PID_ARITH_SHIFT);
+
+ rinfo[j].diff = rinfo[i].diff + tmp;
+ pinfo->oldrate = sta->txrate;
+ }
+ rate_control_pid_normalize(rinfo, mode->num_rates);
+
/* Compute the proportional, integral and derivative errors. */
err_prop = RC_PID_TARGET_PF - pf;
@@ -207,16 +308,11 @@ static void rate_control_pid_sample(struct rc_pid_info *pinfo,
/* Compute the controller output. */
adj = (err_prop * pinfo->coeff_p + err_int * pinfo->coeff_i
+ err_der * pinfo->coeff_d);
-
- /* We need to do an arithmetic right shift. ISO C says this is
- * implementation defined for negative left operands. Hence, be
- * careful to get it right, also for negative values. */
- adj = (adj < 0) ? -((-adj) >> (2 * RC_PID_ARITH_SHIFT)) :
- adj >> (2 * RC_PID_ARITH_SHIFT);
+ adj = RC_PID_DO_ARITH_RIGHT_SHIFT(adj, 2 * RC_PID_ARITH_SHIFT);
/* Change rate. */
if (adj)
- rate_control_pid_adjust_rate(local, sta, adj);
+ rate_control_pid_adjust_rate(local, sta, adj, rinfo);
}
static void rate_control_pid_tx_status(void *priv, struct net_device *dev,
@@ -316,13 +412,57 @@ static void rate_control_pid_rate_init(void *priv, void *priv_sta,
static void *rate_control_pid_alloc(struct ieee80211_local *local)
{
struct rc_pid_info *pinfo;
+ struct rc_pid_rateinfo *rinfo;
+ struct ieee80211_hw_mode *mode;
+ int i, j, tmp;
+ bool s;
pinfo = kmalloc(sizeof(*pinfo), GFP_ATOMIC);
+ if (!pinfo)
+ return NULL;
+
+ /* We can safely assume that oper_hw_mode won't change unless we get
+ * reinitialized. */
+ mode = local->oper_hw_mode;
+ rinfo = kmalloc(sizeof(*rinfo) * mode->num_rates, GFP_ATOMIC);
+ if (!rinfo) {
+ kfree(pinfo);
+ return NULL;
+ }
+
+ /* Sort the rates. This is optimized for the most common case (i.e.
+ * almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed
+ * mapping too. */
+ for (i = 0; i < mode->num_rates; i++) {
+ rinfo[i].index = i;
+ rinfo[i].rev_index = i;
+ if (RC_PID_FAST_START)
+ rinfo[i].diff = 0;
+ else
+ rinfo[i].diff = i * RC_PID_NORM_OFFSET;
+ }
+ for (i = 1; i < mode->num_rates; i++) {
+ s = 0;
+ for (j = 0; j < mode->num_rates - i; j++)
+ if (unlikely(mode->rates[rinfo[j].index].rate >
+ mode->rates[rinfo[j + 1].index].rate)) {
+ tmp = rinfo[j].index;
+ rinfo[j].index = rinfo[j + 1].index;
+ rinfo[j + 1].index = tmp;
+ rinfo[rinfo[j].index].rev_index = j;
+ rinfo[rinfo[j + 1].index].rev_index = j + 1;
+ s = 1;
+ }
+ if (!s)
+ break;
+ }
pinfo->target = RC_PID_TARGET_PF;
pinfo->coeff_p = RC_PID_COEFF_P;
pinfo->coeff_i = RC_PID_COEFF_I;
pinfo->coeff_d = RC_PID_COEFF_D;
+ pinfo->rinfo = rinfo;
+ pinfo->oldrate = 0;
return pinfo;
}
@@ -330,6 +470,7 @@ static void *rate_control_pid_alloc(struct ieee80211_local *local)
static void rate_control_pid_free(void *priv)
{
struct rc_pid_info *pinfo = priv;
+ kfree(pinfo->rinfo);
kfree(pinfo);
}