aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/acpi/sleep/main.c160
-rw-r--r--drivers/pci/pci-acpi.c28
-rw-r--r--drivers/pci/pci.c8
-rw-r--r--drivers/pci/pci.h2
-rw-r--r--drivers/pnp/driver.c5
-rw-r--r--drivers/pnp/pnpacpi/core.c14
-rw-r--r--include/acpi/acpi_bus.h2
-rw-r--r--include/linux/pnp.h4
8 files changed, 181 insertions, 42 deletions
diff --git a/drivers/acpi/sleep/main.c b/drivers/acpi/sleep/main.c
index 54c2dfcf865..ab21357c5c7 100644
--- a/drivers/acpi/sleep/main.c
+++ b/drivers/acpi/sleep/main.c
@@ -34,35 +34,55 @@ static u32 acpi_suspend_states[] = {
static int init_8259A_after_S1;
+extern int acpi_sleep_prepare(u32 acpi_state);
+extern void acpi_power_off(void);
+
+static u32 acpi_target_sleep_state = ACPI_STATE_S0;
+
+/**
+ * acpi_pm_set_target - Set the target system sleep state to the state
+ * associated with given @pm_state, if supported.
+ */
+
+static int acpi_pm_set_target(suspend_state_t pm_state)
+{
+ u32 acpi_state = acpi_suspend_states[pm_state];
+ int error = 0;
+
+ if (sleep_states[acpi_state]) {
+ acpi_target_sleep_state = acpi_state;
+ } else {
+ printk(KERN_ERR "ACPI does not support this state: %d\n",
+ pm_state);
+ error = -ENOSYS;
+ }
+ return error;
+}
+
/**
* acpi_pm_prepare - Do preliminary suspend work.
- * @pm_state: suspend state we're entering.
+ * @pm_state: ignored
*
- * Make sure we support the state. If we do, and we need it, set the
- * firmware waking vector and do arch-specific nastiness to get the
- * wakeup code to the waking vector.
+ * If necessary, set the firmware waking vector and do arch-specific
+ * nastiness to get the wakeup code to the waking vector.
*/
-extern int acpi_sleep_prepare(u32 acpi_state);
-extern void acpi_power_off(void);
-
static int acpi_pm_prepare(suspend_state_t pm_state)
{
- u32 acpi_state = acpi_suspend_states[pm_state];
+ int error = acpi_sleep_prepare(acpi_target_sleep_state);
- if (!sleep_states[acpi_state]) {
- printk("acpi_pm_prepare does not support %d \n", pm_state);
- return -EPERM;
- }
- return acpi_sleep_prepare(acpi_state);
+ if (error)
+ acpi_target_sleep_state = ACPI_STATE_S0;
+
+ return error;
}
/**
* acpi_pm_enter - Actually enter a sleep state.
- * @pm_state: State we're entering.
+ * @pm_state: ignored
*
- * Flush caches and go to sleep. For STR or STD, we have to call
- * arch-specific assembly, which in turn call acpi_enter_sleep_state().
+ * Flush caches and go to sleep. For STR we have to call arch-specific
+ * assembly, which in turn call acpi_enter_sleep_state().
* It's unfortunate, but it works. Please fix if you're feeling frisky.
*/
@@ -70,31 +90,31 @@ static int acpi_pm_enter(suspend_state_t pm_state)
{
acpi_status status = AE_OK;
unsigned long flags = 0;
- u32 acpi_state = acpi_suspend_states[pm_state];
+ u32 acpi_state = acpi_target_sleep_state;
ACPI_FLUSH_CPU_CACHE();
/* Do arch specific saving of state. */
- if (pm_state > PM_SUSPEND_STANDBY) {
+ if (acpi_state == ACPI_STATE_S3) {
int error = acpi_save_state_mem();
- if (error)
+
+ if (error) {
+ acpi_target_sleep_state = ACPI_STATE_S0;
return error;
+ }
}
local_irq_save(flags);
acpi_enable_wakeup_device(acpi_state);
- switch (pm_state) {
- case PM_SUSPEND_STANDBY:
+ switch (acpi_state) {
+ case ACPI_STATE_S1:
barrier();
status = acpi_enter_sleep_state(acpi_state);
break;
- case PM_SUSPEND_MEM:
+ case ACPI_STATE_S3:
do_suspend_lowlevel();
break;
-
- default:
- return -EINVAL;
}
/* ACPI 3.0 specs (P62) says that it's the responsabilty
@@ -107,12 +127,8 @@ static int acpi_pm_enter(suspend_state_t pm_state)
local_irq_restore(flags);
printk(KERN_DEBUG "Back to C!\n");
- /* restore processor state
- * We should only be here if we're coming back from STR or STD.
- * And, in the case of the latter, the memory image should have already
- * been loaded from disk.
- */
- if (pm_state > PM_SUSPEND_STANDBY)
+ /* restore processor state */
+ if (acpi_state == ACPI_STATE_S3)
acpi_restore_state_mem();
return ACPI_SUCCESS(status) ? 0 : -EFAULT;
@@ -120,7 +136,7 @@ static int acpi_pm_enter(suspend_state_t pm_state)
/**
* acpi_pm_finish - Finish up suspend sequence.
- * @pm_state: State we're coming out of.
+ * @pm_state: ignored
*
* This is called after we wake back up (or if entering the sleep state
* failed).
@@ -128,7 +144,7 @@ static int acpi_pm_enter(suspend_state_t pm_state)
static int acpi_pm_finish(suspend_state_t pm_state)
{
- u32 acpi_state = acpi_suspend_states[pm_state];
+ u32 acpi_state = acpi_target_sleep_state;
acpi_leave_sleep_state(acpi_state);
acpi_disable_wakeup_device(acpi_state);
@@ -136,6 +152,8 @@ static int acpi_pm_finish(suspend_state_t pm_state)
/* reset firmware waking vector */
acpi_set_firmware_waking_vector((acpi_physical_address) 0);
+ acpi_target_sleep_state = ACPI_STATE_S0;
+
#ifdef CONFIG_X86
if (init_8259A_after_S1) {
printk("Broken toshiba laptop -> kicking interrupts\n");
@@ -178,6 +196,7 @@ static int acpi_pm_state_valid(suspend_state_t pm_state)
static struct pm_ops acpi_pm_ops = {
.valid = acpi_pm_state_valid,
+ .set_target = acpi_pm_set_target,
.prepare = acpi_pm_prepare,
.enter = acpi_pm_enter,
.finish = acpi_pm_finish,
@@ -237,6 +256,81 @@ static struct hibernation_ops acpi_hibernation_ops = {
};
#endif /* CONFIG_SOFTWARE_SUSPEND */
+/**
+ * acpi_pm_device_sleep_state - return preferred power state of ACPI device
+ * in the system sleep state given by %acpi_target_sleep_state
+ * @dev: device to examine
+ * @wake: if set, the device should be able to wake up the system
+ * @d_min_p: used to store the upper limit of allowed states range
+ * Return value: preferred power state of the device on success, -ENODEV on
+ * failure (ie. if there's no 'struct acpi_device' for @dev)
+ *
+ * Find the lowest power (highest number) ACPI device power state that
+ * device @dev can be in while the system is in the sleep state represented
+ * by %acpi_target_sleep_state. If @wake is nonzero, the device should be
+ * able to wake up the system from this sleep state. If @d_min_p is set,
+ * the highest power (lowest number) device power state of @dev allowed
+ * in this system sleep state is stored at the location pointed to by it.
+ *
+ * The caller must ensure that @dev is valid before using this function.
+ * The caller is also responsible for figuring out if the device is
+ * supposed to be able to wake up the system and passing this information
+ * via @wake.
+ */
+
+int acpi_pm_device_sleep_state(struct device *dev, int wake, int *d_min_p)
+{
+ acpi_handle handle = DEVICE_ACPI_HANDLE(dev);
+ struct acpi_device *adev;
+ char acpi_method[] = "_SxD";
+ unsigned long d_min, d_max;
+
+ if (!handle || ACPI_FAILURE(acpi_bus_get_device(handle, &adev))) {
+ printk(KERN_ERR "ACPI handle has no context!\n");
+ return -ENODEV;
+ }
+
+ acpi_method[2] = '0' + acpi_target_sleep_state;
+ /*
+ * If the sleep state is S0, we will return D3, but if the device has
+ * _S0W, we will use the value from _S0W
+ */
+ d_min = ACPI_STATE_D0;
+ d_max = ACPI_STATE_D3;
+
+ /*
+ * If present, _SxD methods return the minimum D-state (highest power
+ * state) we can use for the corresponding S-states. Otherwise, the
+ * minimum D-state is D0 (ACPI 3.x).
+ *
+ * NOTE: We rely on acpi_evaluate_integer() not clobbering the integer
+ * provided -- that's our fault recovery, we ignore retval.
+ */
+ if (acpi_target_sleep_state > ACPI_STATE_S0)
+ acpi_evaluate_integer(handle, acpi_method, NULL, &d_min);
+
+ /*
+ * If _PRW says we can wake up the system from the target sleep state,
+ * the D-state returned by _SxD is sufficient for that (we assume a
+ * wakeup-aware driver if wake is set). Still, if _SxW exists
+ * (ACPI 3.x), it should return the maximum (lowest power) D-state that
+ * can wake the system. _S0W may be valid, too.
+ */
+ if (acpi_target_sleep_state == ACPI_STATE_S0 ||
+ (wake && adev->wakeup.state.enabled &&
+ adev->wakeup.sleep_state <= acpi_target_sleep_state)) {
+ acpi_method[3] = 'W';
+ acpi_evaluate_integer(handle, acpi_method, NULL, &d_max);
+ /* Sanity check */
+ if (d_max < d_min)
+ d_min = d_max;
+ }
+
+ if (d_min_p)
+ *d_min_p = d_min;
+ return d_max;
+}
+
/*
* Toshiba fails to preserve interrupts over S1, reinitialization
* of 8259 is needed after S1 resume.
diff --git a/drivers/pci/pci-acpi.c b/drivers/pci/pci-acpi.c
index c8062494009..67c63d1f158 100644
--- a/drivers/pci/pci-acpi.c
+++ b/drivers/pci/pci-acpi.c
@@ -245,16 +245,33 @@ EXPORT_SYMBOL(pci_osc_control_set);
* currently we simply return _SxD, if present.
*/
-static int acpi_pci_choose_state(struct pci_dev *pdev, pm_message_t state)
+static pci_power_t acpi_pci_choose_state(struct pci_dev *pdev,
+ pm_message_t state)
{
- /* TBD */
-
- return -ENODEV;
+ int acpi_state;
+
+ acpi_state = acpi_pm_device_sleep_state(&pdev->dev,
+ device_may_wakeup(&pdev->dev), NULL);
+ if (acpi_state < 0)
+ return PCI_POWER_ERROR;
+
+ switch (acpi_state) {
+ case ACPI_STATE_D0:
+ return PCI_D0;
+ case ACPI_STATE_D1:
+ return PCI_D1;
+ case ACPI_STATE_D2:
+ return PCI_D2;
+ case ACPI_STATE_D3:
+ return PCI_D3hot;
+ }
+ return PCI_POWER_ERROR;
}
static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
{
acpi_handle handle = DEVICE_ACPI_HANDLE(&dev->dev);
+ acpi_handle tmp;
static int state_conv[] = {
[0] = 0,
[1] = 1,
@@ -266,6 +283,9 @@ static int acpi_pci_set_power_state(struct pci_dev *dev, pci_power_t state)
if (!handle)
return -ENODEV;
+ /* If the ACPI device has _EJ0, ignore the device */
+ if (ACPI_SUCCESS(acpi_get_handle(handle, "_EJ0", &tmp)))
+ return 0;
return acpi_bus_set_power(handle, acpi_state);
}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 03fd59e80fe..1458fd69e67 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -499,7 +499,7 @@ pci_set_power_state(struct pci_dev *dev, pci_power_t state)
return 0;
}
-int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
+pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
/**
* pci_choose_state - Choose the power state of a PCI device
@@ -513,15 +513,15 @@ int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
pci_power_t pci_choose_state(struct pci_dev *dev, pm_message_t state)
{
- int ret;
+ pci_power_t ret;
if (!pci_find_capability(dev, PCI_CAP_ID_PM))
return PCI_D0;
if (platform_pci_choose_state) {
ret = platform_pci_choose_state(dev, state);
- if (ret >= 0)
- state.event = ret;
+ if (ret != PCI_POWER_ERROR)
+ return ret;
}
switch (state.event) {
diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h
index 3fec13d3add..c293ba1f274 100644
--- a/drivers/pci/pci.h
+++ b/drivers/pci/pci.h
@@ -13,7 +13,7 @@ extern int pci_bus_alloc_resource(struct pci_bus *bus, struct resource *res,
resource_size_t, resource_size_t),
void *alignf_data);
/* Firmware callbacks */
-extern int (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
+extern pci_power_t (*platform_pci_choose_state)(struct pci_dev *dev, pm_message_t state);
extern int (*platform_pci_set_power_state)(struct pci_dev *dev, pci_power_t state);
extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val);
diff --git a/drivers/pnp/driver.c b/drivers/pnp/driver.c
index e161423b430..1432806451c 100644
--- a/drivers/pnp/driver.c
+++ b/drivers/pnp/driver.c
@@ -167,6 +167,8 @@ static int pnp_bus_suspend(struct device *dev, pm_message_t state)
return error;
}
+ if (pnp_dev->protocol && pnp_dev->protocol->suspend)
+ pnp_dev->protocol->suspend(pnp_dev, state);
return 0;
}
@@ -179,6 +181,9 @@ static int pnp_bus_resume(struct device *dev)
if (!pnp_drv)
return 0;
+ if (pnp_dev->protocol && pnp_dev->protocol->resume)
+ pnp_dev->protocol->resume(pnp_dev);
+
if (!(pnp_drv->flags & PNP_DRIVER_RES_DO_NOT_CHANGE)) {
error = pnp_start_dev(pnp_dev);
if (error)
diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index a00548799e9..c37a558ecd9 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -119,11 +119,25 @@ static int pnpacpi_disable_resources(struct pnp_dev *dev)
return ACPI_FAILURE(status) ? -ENODEV : 0;
}
+static int pnpacpi_suspend(struct pnp_dev *dev, pm_message_t state)
+{
+ return acpi_bus_set_power((acpi_handle)dev->data,
+ acpi_pm_device_sleep_state(&dev->dev,
+ device_may_wakeup(&dev->dev), NULL));
+}
+
+static int pnpacpi_resume(struct pnp_dev *dev)
+{
+ return acpi_bus_set_power((acpi_handle)dev->data, ACPI_STATE_D0);
+}
+
static struct pnp_protocol pnpacpi_protocol = {
.name = "Plug and Play ACPI",
.get = pnpacpi_get_resources,
.set = pnpacpi_set_resources,
.disable = pnpacpi_disable_resources,
+ .suspend = pnpacpi_suspend,
+ .resume = pnpacpi_resume,
};
static int __init pnpacpi_add_device(struct acpi_device *device)
diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h
index 5e3dcf3299b..a9f73efa01b 100644
--- a/include/acpi/acpi_bus.h
+++ b/include/acpi/acpi_bus.h
@@ -365,6 +365,8 @@ acpi_handle acpi_get_child(acpi_handle, acpi_integer);
acpi_handle acpi_get_pci_rootbridge_handle(unsigned int, unsigned int);
#define DEVICE_ACPI_HANDLE(dev) ((acpi_handle)((dev)->archdata.acpi_handle))
+int acpi_pm_device_sleep_state(struct device *, int, int *);
+
#endif /* CONFIG_ACPI */
#endif /*__ACPI_BUS_H__*/
diff --git a/include/linux/pnp.h b/include/linux/pnp.h
index 2a1897e6f93..66edb229318 100644
--- a/include/linux/pnp.h
+++ b/include/linux/pnp.h
@@ -335,6 +335,10 @@ struct pnp_protocol {
int (*set)(struct pnp_dev *dev, struct pnp_resource_table *res);
int (*disable)(struct pnp_dev *dev);
+ /* protocol specific suspend/resume */
+ int (*suspend)(struct pnp_dev *dev, pm_message_t state);
+ int (*resume)(struct pnp_dev *dev);
+
/* used by pnp layer only (look but don't touch) */
unsigned char number; /* protocol number*/
struct device dev; /* link to driver model */