diff options
| -rw-r--r-- | drivers/input/touchscreen/Kconfig | 12 | ||||
| -rw-r--r-- | drivers/input/touchscreen/Makefile | 1 | ||||
| -rw-r--r-- | drivers/input/touchscreen/penmount.c | 185 | ||||
| -rw-r--r-- | include/linux/serio.h | 1 |
4 files changed, 199 insertions, 0 deletions
diff --git a/drivers/input/touchscreen/Kconfig b/drivers/input/touchscreen/Kconfig index b1b14f8d4dd..fa038126d50 100644 --- a/drivers/input/touchscreen/Kconfig +++ b/drivers/input/touchscreen/Kconfig @@ -108,4 +108,16 @@ config TOUCHSCREEN_HP600 To compile this driver as a module, choose M here: the module will be called hp680_ts_input. +config TOUCHSCREEN_PENMOUNT + tristate "Penmount serial touchscreen" + select SERIO + help + Say Y here if you have a Penmount serial touchscreen connected to + your system. + + If unsure, say N. + + To compile this driver as a module, choose M here: the + module will be called penmount. + endif diff --git a/drivers/input/touchscreen/Makefile b/drivers/input/touchscreen/Makefile index 5e5557c4312..72e7be8097a 100644 --- a/drivers/input/touchscreen/Makefile +++ b/drivers/input/touchscreen/Makefile @@ -12,3 +12,4 @@ obj-$(CONFIG_TOUCHSCREEN_ELO) += elo.o obj-$(CONFIG_TOUCHSCREEN_MTOUCH) += mtouch.o obj-$(CONFIG_TOUCHSCREEN_MK712) += mk712.o obj-$(CONFIG_TOUCHSCREEN_HP600) += hp680_ts_input.o +obj-$(CONFIG_TOUCHSCREEN_PENMOUNT) += penmount.o diff --git a/drivers/input/touchscreen/penmount.c b/drivers/input/touchscreen/penmount.c new file mode 100644 index 00000000000..f7370109d43 --- /dev/null +++ b/drivers/input/touchscreen/penmount.c @@ -0,0 +1,185 @@ +/* + * Penmount serial touchscreen driver + * + * Copyright (c) 2006 Rick Koch <n1gp@hotmail.com> + * + * Based on ELO driver (drivers/input/touchscreen/elo.c) + * Copyright (c) 2004 Vojtech Pavlik + */ + +/* + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include <linux/errno.h> +#include <linux/kernel.h> +#include <linux/module.h> +#include <linux/slab.h> +#include <linux/input.h> +#include <linux/serio.h> +#include <linux/init.h> + +#define DRIVER_DESC "Penmount serial touchscreen driver" + +MODULE_AUTHOR("Rick Koch <n1gp@hotmail.com>"); +MODULE_DESCRIPTION(DRIVER_DESC); +MODULE_LICENSE("GPL"); + +/* + * Definitions & global arrays. + */ + +#define PM_MAX_LENGTH 5 + +/* + * Per-touchscreen data. + */ + +struct pm { + struct input_dev *dev; + struct serio *serio; + int idx; + unsigned char data[PM_MAX_LENGTH]; + char phys[32]; +}; + +static irqreturn_t pm_interrupt(struct serio *serio, + unsigned char data, unsigned int flags, struct pt_regs *regs) +{ + struct pm *pm = serio_get_drvdata(serio); + struct input_dev *dev = pm->dev; + + pm->data[pm->idx] = data; + + if (pm->data[0] & 0x80) { + if (PM_MAX_LENGTH == ++pm->idx) { + input_regs(dev, regs); + input_report_abs(dev, ABS_X, pm->data[2] * 128 + pm->data[1]); + input_report_abs(dev, ABS_Y, pm->data[4] * 128 + pm->data[3]); + input_report_key(dev, BTN_TOUCH, !!(pm->data[0] & 0x40)); + input_sync(dev); + pm->idx = 0; + } + } + + return IRQ_HANDLED; +} + +/* + * pm_disconnect() is the opposite of pm_connect() + */ + +static void pm_disconnect(struct serio *serio) +{ + struct pm *pm = serio_get_drvdata(serio); + + input_get_device(pm->dev); + input_unregister_device(pm->dev); + serio_close(serio); + serio_set_drvdata(serio, NULL); + input_put_device(pm->dev); + kfree(pm); +} + +/* + * pm_connect() is the routine that is called when someone adds a + * new serio device that supports Gunze protocol and registers it as + * an input device. + */ + +static int pm_connect(struct serio *serio, struct serio_driver *drv) +{ + struct pm *pm; + struct input_dev *input_dev; + int err; + + pm = kzalloc(sizeof(struct pm), GFP_KERNEL); + input_dev = input_allocate_device(); + if (!pm || !input_dev) { + err = -ENOMEM; + goto fail1; + } + + pm->serio = serio; + pm->dev = input_dev; + snprintf(pm->phys, sizeof(pm->phys), "%s/input0", serio->phys); + + input_dev->private = pm; + input_dev->name = "Penmount Serial TouchScreen"; + input_dev->phys = pm->phys; + input_dev->id.bustype = BUS_RS232; + input_dev->id.vendor = SERIO_PENMOUNT; + input_dev->id.product = 0; + input_dev->id.version = 0x0100; + input_dev->cdev.dev = &serio->dev; + + input_dev->evbit[0] = BIT(EV_KEY) | BIT(EV_ABS); + input_dev->keybit[LONG(BTN_TOUCH)] = BIT(BTN_TOUCH); + input_set_abs_params(pm->dev, ABS_X, 0, 0x3ff, 0, 0); + input_set_abs_params(pm->dev, ABS_Y, 0, 0x3ff, 0, 0); + + serio_set_drvdata(serio, pm); + + err = serio_open(serio, drv); + if (err) + goto fail2; + + err = input_register_device(pm->dev); + if (err) + goto fail3; + + return 0; + + fail3: serio_close(serio); + fail2: serio_set_drvdata(serio, NULL); + fail1: input_free_device(input_dev); + kfree(pm); + return err; +} + +/* + * The serio driver structure. + */ + +static struct serio_device_id pm_serio_ids[] = { + { + .type = SERIO_RS232, + .proto = SERIO_PENMOUNT, + .id = SERIO_ANY, + .extra = SERIO_ANY, + }, + { 0 } +}; + +MODULE_DEVICE_TABLE(serio, pm_serio_ids); + +static struct serio_driver pm_drv = { + .driver = { + .name = "penmountlpc", + }, + .description = DRIVER_DESC, + .id_table = pm_serio_ids, + .interrupt = pm_interrupt, + .connect = pm_connect, + .disconnect = pm_disconnect, +}; + +/* + * The functions for inserting/removing us as a module. + */ + +static int __init pm_init(void) +{ + serio_register_driver(&pm_drv); + return 0; +} + +static void __exit pm_exit(void) +{ + serio_unregister_driver(&pm_drv); +} + +module_init(pm_init); +module_exit(pm_exit); diff --git a/include/linux/serio.h b/include/linux/serio.h index 6348e833089..ad546a0205c 100644 --- a/include/linux/serio.h +++ b/include/linux/serio.h @@ -217,5 +217,6 @@ static inline void serio_unpin_driver(struct serio *serio) #define SERIO_LKKBD 0x28 #define SERIO_ELO 0x29 #define SERIO_MICROTOUCH 0x30 +#define SERIO_PENMOUNT 0x31 #endif |