aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/usb/gadget/Kconfig23
-rw-r--r--drivers/usb/gadget/cdc2.c1
-rw-r--r--drivers/usb/gadget/composite.c4
-rw-r--r--drivers/usb/gadget/ether.c2
-rw-r--r--drivers/usb/gadget/f_loopback.c1
-rw-r--r--drivers/usb/gadget/f_sourcesink.c1
-rw-r--r--drivers/usb/gadget/file_storage.c2
-rw-r--r--drivers/usb/gadget/gmidi.c2
-rw-r--r--drivers/usb/gadget/printer.c3
-rw-r--r--drivers/usb/gadget/serial.c1
10 files changed, 25 insertions, 15 deletions
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig
index c0dfd9be311..1a72715bce8 100644
--- a/drivers/usb/gadget/Kconfig
+++ b/drivers/usb/gadget/Kconfig
@@ -45,7 +45,7 @@ if USB_GADGET
config USB_GADGET_DEBUG
boolean "Debugging messages (DEVELOPMENT)"
- depends on USB_GADGET && DEBUG_KERNEL
+ depends on DEBUG_KERNEL
help
Many controller and gadget drivers will print some debugging
messages if you use this option to ask for those messages.
@@ -59,7 +59,7 @@ config USB_GADGET_DEBUG
config USB_GADGET_DEBUG_FILES
boolean "Debugging information files (DEVELOPMENT)"
- depends on USB_GADGET && PROC_FS
+ depends on PROC_FS
help
Some of the drivers in the "gadget" framework can expose
debugging information in files such as /proc/driver/udc
@@ -70,7 +70,7 @@ config USB_GADGET_DEBUG_FILES
config USB_GADGET_DEBUG_FS
boolean "Debugging information files in debugfs (DEVELOPMENT)"
- depends on USB_GADGET && DEBUG_FS
+ depends on DEBUG_FS
help
Some of the drivers in the "gadget" framework can expose
debugging information in files under /sys/kernel/debug/.
@@ -79,6 +79,23 @@ config USB_GADGET_DEBUG_FS
Enable these files by choosing "Y" here. If in doubt, or
to conserve kernel memory, say "N".
+config USB_GADGET_VBUS_DRAW
+ int "Maximum VBUS Power usage (2-500 mA)"
+ range 2 500
+ default 2
+ help
+ Some devices need to draw power from USB when they are
+ configured, perhaps to operate circuitry or to recharge
+ batteries. This is in addition to any local power supply,
+ such as an AC adapter or batteries.
+
+ Enter the maximum power your device draws through USB, in
+ milliAmperes. The permitted range of values is 2 - 500 mA;
+ 0 mA would be legal, but can make some hosts misbehave.
+
+ This value will be used except for system-specific gadget
+ drivers that have more specific information.
+
config USB_GADGET_SELECTED
boolean
diff --git a/drivers/usb/gadget/cdc2.c b/drivers/usb/gadget/cdc2.c
index a724fc14985..5495b171cf2 100644
--- a/drivers/usb/gadget/cdc2.c
+++ b/drivers/usb/gadget/cdc2.c
@@ -155,7 +155,6 @@ static struct usb_configuration cdc_config_driver = {
.bConfigurationValue = 1,
/* .iConfiguration = DYNAMIC */
.bmAttributes = USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 1, /* 2 mA, minimal */
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c
index f79fdb839cb..f2da0269e1b 100644
--- a/drivers/usb/gadget/composite.c
+++ b/drivers/usb/gadget/composite.c
@@ -245,7 +245,7 @@ static int config_buf(struct usb_configuration *config,
c->bConfigurationValue = config->bConfigurationValue;
c->iConfiguration = config->iConfiguration;
c->bmAttributes = USB_CONFIG_ATT_ONE | config->bmAttributes;
- c->bMaxPower = config->bMaxPower;
+ c->bMaxPower = config->bMaxPower ? : (CONFIG_USB_GADGET_VBUS_DRAW / 2);
/* There may be e.g. OTG descriptors */
if (config->descriptors) {
@@ -432,7 +432,7 @@ static int set_config(struct usb_composite_dev *cdev,
}
/* when we return, be sure our power usage is valid */
- power = 2 * c->bMaxPower;
+ power = c->bMaxPower ? (2 * c->bMaxPower) : CONFIG_USB_GADGET_VBUS_DRAW;
done:
usb_gadget_vbus_draw(gadget, power);
return result;
diff --git a/drivers/usb/gadget/ether.c b/drivers/usb/gadget/ether.c
index 944c8e889ab..37252d0012a 100644
--- a/drivers/usb/gadget/ether.c
+++ b/drivers/usb/gadget/ether.c
@@ -242,7 +242,6 @@ static struct usb_configuration rndis_config_driver = {
.bConfigurationValue = 2,
/* .iConfiguration = DYNAMIC */
.bmAttributes = USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 1, /* 2 mA, minimal */
};
/*-------------------------------------------------------------------------*/
@@ -271,7 +270,6 @@ static struct usb_configuration eth_config_driver = {
.bConfigurationValue = 1,
/* .iConfiguration = DYNAMIC */
.bmAttributes = USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 1, /* 2 mA, minimal */
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/gadget/f_loopback.c b/drivers/usb/gadget/f_loopback.c
index 87dde012dac..8affe1dfc2c 100644
--- a/drivers/usb/gadget/f_loopback.c
+++ b/drivers/usb/gadget/f_loopback.c
@@ -352,7 +352,6 @@ static struct usb_configuration loopback_driver = {
.bind = loopback_bind_config,
.bConfigurationValue = 2,
.bmAttributes = USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 1, /* 2 mA, minimal */
/* .iConfiguration = DYNAMIC */
};
diff --git a/drivers/usb/gadget/f_sourcesink.c b/drivers/usb/gadget/f_sourcesink.c
index f18c3a14d72..dc84d26d283 100644
--- a/drivers/usb/gadget/f_sourcesink.c
+++ b/drivers/usb/gadget/f_sourcesink.c
@@ -552,7 +552,6 @@ static struct usb_configuration sourcesink_driver = {
.setup = sourcesink_setup,
.bConfigurationValue = 3,
.bmAttributes = USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 1, /* 2 mA, minimal */
/* .iConfiguration = DYNAMIC */
};
diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c
index e0f616f39ba..c4e62a6297d 100644
--- a/drivers/usb/gadget/file_storage.c
+++ b/drivers/usb/gadget/file_storage.c
@@ -851,7 +851,7 @@ config_desc = {
.bConfigurationValue = CONFIG_VALUE,
.iConfiguration = STRING_CONFIG,
.bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 1, // self-powered
+ .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2,
};
static struct usb_otg_descriptor
diff --git a/drivers/usb/gadget/gmidi.c b/drivers/usb/gadget/gmidi.c
index 6eee760410d..60d3f9e9b51 100644
--- a/drivers/usb/gadget/gmidi.c
+++ b/drivers/usb/gadget/gmidi.c
@@ -222,7 +222,7 @@ static struct usb_config_descriptor config_desc = {
* power properties of the device. Is it selfpowered?
*/
.bmAttributes = USB_CONFIG_ATT_ONE,
- .bMaxPower = 1,
+ .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2,
};
/* B.3.1 Standard AC Interface Descriptor */
diff --git a/drivers/usb/gadget/printer.c b/drivers/usb/gadget/printer.c
index 00b7ed5013a..5a3034fdfe4 100644
--- a/drivers/usb/gadget/printer.c
+++ b/drivers/usb/gadget/printer.c
@@ -252,7 +252,7 @@ static struct usb_config_descriptor config_desc = {
.bConfigurationValue = DEV_CONFIG_VALUE,
.iConfiguration = 0,
.bmAttributes = USB_CONFIG_ATT_ONE | USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 1 /* Self-Powered */
+ .bMaxPower = CONFIG_USB_GADGET_VBUS_DRAW / 2,
};
static struct usb_interface_descriptor intf_desc = {
@@ -1476,7 +1476,6 @@ autoconf_fail:
if (gadget->is_otg) {
otg_desc.bmAttributes |= USB_OTG_HNP,
config_desc.bmAttributes |= USB_CONFIG_ATT_WAKEUP;
- config_desc.bMaxPower = 4;
}
spin_lock_init(&dev->lock);
diff --git a/drivers/usb/gadget/serial.c b/drivers/usb/gadget/serial.c
index 2dee848b2f5..37879af1c43 100644
--- a/drivers/usb/gadget/serial.c
+++ b/drivers/usb/gadget/serial.c
@@ -159,7 +159,6 @@ static struct usb_configuration serial_config_driver = {
/* .bConfigurationValue = f(use_acm) */
/* .iConfiguration = DYNAMIC */
.bmAttributes = USB_CONFIG_ATT_SELFPOWER,
- .bMaxPower = 1, /* 2 mA, minimal */
};
static int __init gs_bind(struct usb_composite_dev *cdev)
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 23:35:39 +0000