diff options
-rw-r--r-- | drivers/net/wireless/b43/phy_lp.c | 105 | ||||
-rw-r--r-- | drivers/net/wireless/b43/phy_lp.h | 5 |
2 files changed, 103 insertions, 7 deletions
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c index cfb8337d385..996b7eccfaf 100644 --- a/drivers/net/wireless/b43/phy_lp.c +++ b/drivers/net/wireless/b43/phy_lp.c @@ -1257,18 +1257,109 @@ static void lpphy_calibration(struct b43_wldev *dev) b43_mac_enable(dev); } +static void lpphy_set_tssi_mux(struct b43_wldev *dev, enum tssi_mux_mode mode) +{ + if (mode != TSSI_MUX_EXT) { + b43_radio_set(dev, B2063_PA_SP1, 0x2); + b43_phy_set(dev, B43_PHY_OFDM(0xF3), 0x1000); + b43_radio_write(dev, B2063_PA_CTL10, 0x51); + if (mode == TSSI_MUX_POSTPA) { + b43_radio_mask(dev, B2063_PA_SP1, 0xFFFE); + b43_phy_mask(dev, B43_LPPHY_AFE_CTL_OVRVAL, 0xFFC7); + } else { + b43_radio_maskset(dev, B2063_PA_SP1, 0xFFFE, 0x1); + b43_phy_maskset(dev, B43_LPPHY_AFE_CTL_OVRVAL, + 0xFFC7, 0x20); + } + } else { + B43_WARN_ON(1); + } +} + +static void lpphy_tx_pctl_init_hw(struct b43_wldev *dev) +{ + u16 tmp; + int i; + + //SPEC TODO Call LP PHY Clear TX Power offsets + for (i = 0; i < 64; i++) { + if (dev->phy.rev >= 2) + b43_lptab_write(dev, B43_LPTAB32(7, i + 1), i); + else + b43_lptab_write(dev, B43_LPTAB32(10, i + 1), i); + } + + b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_NNUM, 0xFF00, 0xFF); + b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_NNUM, 0x8FFF, 0x5000); + b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_IDLETSSI, 0xFFC0, 0x1F); + if (dev->phy.rev < 2) { + b43_phy_mask(dev, B43_LPPHY_LP_PHY_CTL, 0xEFFF); + b43_phy_maskset(dev, B43_LPPHY_LP_PHY_CTL, 0xDFFF, 0x2000); + } else { + b43_phy_mask(dev, B43_PHY_OFDM(0x103), 0xFFFE); + b43_phy_maskset(dev, B43_PHY_OFDM(0x103), 0xFFFB, 0x4); + b43_phy_maskset(dev, B43_PHY_OFDM(0x103), 0xFFEF, 0x10); + b43_radio_maskset(dev, B2063_IQ_CALIB_CTL2, 0xF3, 0x1); + lpphy_set_tssi_mux(dev, TSSI_MUX_POSTPA); + } + b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_IDLETSSI, 0x7FFF, 0x8000); + b43_phy_mask(dev, B43_LPPHY_TX_PWR_CTL_DELTAPWR_LIMIT, 0xFF); + b43_phy_write(dev, B43_LPPHY_TX_PWR_CTL_DELTAPWR_LIMIT, 0xA); + b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD, + (u16)~B43_LPPHY_TX_PWR_CTL_CMD_MODE, + B43_LPPHY_TX_PWR_CTL_CMD_MODE_OFF); + b43_phy_mask(dev, B43_LPPHY_TX_PWR_CTL_NNUM, 0xF8FF); + b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_CMD, + (u16)~B43_LPPHY_TX_PWR_CTL_CMD_MODE, + B43_LPPHY_TX_PWR_CTL_CMD_MODE_SW); + + if (dev->phy.rev < 2) { + b43_phy_maskset(dev, B43_LPPHY_RF_OVERRIDE_0, 0xEFFF, 0x1000); + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_VAL_0, 0xEFFF); + } else { + lpphy_set_tx_power_by_index(dev, 0x7F); + } + + b43_dummy_transmission(dev, true, true); + + tmp = b43_phy_read(dev, B43_LPPHY_TX_PWR_CTL_STAT); + if (tmp & 0x8000) { + b43_phy_maskset(dev, B43_LPPHY_TX_PWR_CTL_IDLETSSI, + 0xFFC0, (tmp & 0xFF) - 32); + } + + b43_phy_mask(dev, B43_LPPHY_RF_OVERRIDE_0, 0xEFFF); + + // (SPEC?) TODO Set "Target TX frequency" variable to 0 + // SPEC FIXME "Set BB Multiplier to 0xE000" impossible - bb_mult is u8! +} + +static void lpphy_tx_pctl_init_sw(struct b43_wldev *dev) +{ + struct lpphy_tx_gains gains; + + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { + gains.gm = 4; + gains.pad = 12; + gains.pga = 12; + gains.dac = 0; + } else { + gains.gm = 7; + gains.pad = 14; + gains.pga = 15; + gains.dac = 0; + } + lpphy_set_tx_gains(dev, gains); + lpphy_set_bb_mult(dev, 150); +} + /* Initialize TX power control */ static void lpphy_tx_pctl_init(struct b43_wldev *dev) { if (0/*FIXME HWPCTL capable */) { - //TODO + lpphy_tx_pctl_init_hw(dev); } else { /* This device is only software TX power control capable. */ - if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) { - //TODO - } else { - //TODO - } - //TODO set BB multiplier to 0x0096 + lpphy_tx_pctl_init_sw(dev); } } diff --git a/drivers/net/wireless/b43/phy_lp.h b/drivers/net/wireless/b43/phy_lp.h index 0461d5b3144..4eab760ac61 100644 --- a/drivers/net/wireless/b43/phy_lp.h +++ b/drivers/net/wireless/b43/phy_lp.h @@ -886,6 +886,11 @@ struct b43_phy_lp { u16 dig_flt_state[9]; }; +enum tssi_mux_mode { + TSSI_MUX_PREPA, + TSSI_MUX_POSTPA, + TSSI_MUX_EXT, +}; struct b43_phy_operations; extern const struct b43_phy_operations b43_phyops_lp; |