diff options
1263 files changed, 24321 insertions, 12466 deletions
diff --git a/Documentation/cputopology.txt b/Documentation/cputopology.txt index 45932ec21ce..b41f3e58aef 100644 --- a/Documentation/cputopology.txt +++ b/Documentation/cputopology.txt @@ -18,11 +18,11 @@ For an architecture to support this feature, it must define some of these macros in include/asm-XXX/topology.h: #define topology_physical_package_id(cpu) #define topology_core_id(cpu) -#define topology_thread_siblings(cpu) -#define topology_core_siblings(cpu) +#define topology_thread_cpumask(cpu) +#define topology_core_cpumask(cpu) The type of **_id is int. -The type of siblings is cpumask_t. +The type of siblings is (const) struct cpumask *. To be consistent on all architectures, include/linux/topology.h provides default definitions for any of the above macros that are diff --git a/Documentation/filesystems/nfs-rdma.txt b/Documentation/filesystems/nfs-rdma.txt index 44bd766f2e5..85eaeaddd27 100644 --- a/Documentation/filesystems/nfs-rdma.txt +++ b/Documentation/filesystems/nfs-rdma.txt @@ -251,7 +251,7 @@ NFS/RDMA Setup Instruct the server to listen on the RDMA transport: - $ echo rdma 2050 > /proc/fs/nfsd/portlist + $ echo rdma 20049 > /proc/fs/nfsd/portlist - On the client system @@ -263,7 +263,7 @@ NFS/RDMA Setup Regardless of how the client was built (module or built-in), use this command to mount the NFS/RDMA server: - $ mount -o rdma,port=2050 <IPoIB-server-name-or-address>:/<export> /mnt + $ mount -o rdma,port=20049 <IPoIB-server-name-or-address>:/<export> /mnt To verify that the mount is using RDMA, run "cat /proc/mounts" and check the "proto" field for the given mount. diff --git a/Documentation/kbuild/kbuild.txt b/Documentation/kbuild/kbuild.txt index 923f9ddee8f..f3355b6812d 100644 --- a/Documentation/kbuild/kbuild.txt +++ b/Documentation/kbuild/kbuild.txt @@ -3,7 +3,7 @@ Environment variables KCPPFLAGS -------------------------------------------------- Additional options to pass when preprocessing. The preprocessing options -will be used in all cases where kbuild do preprocessing including +will be used in all cases where kbuild does preprocessing including building C files and assembler files. KAFLAGS @@ -16,7 +16,7 @@ Additional options to the C compiler. KBUILD_VERBOSE -------------------------------------------------- -Set the kbuild verbosity. Can be assinged same values as "V=...". +Set the kbuild verbosity. Can be assigned same values as "V=...". See make help for the full list. Setting "V=..." takes precedence over KBUILD_VERBOSE. @@ -35,14 +35,14 @@ KBUILD_OUTPUT -------------------------------------------------- Specify the output directory when building the kernel. The output directory can also be specificed using "O=...". -Setting "O=..." takes precedence over KBUILD_OUTPUT +Setting "O=..." takes precedence over KBUILD_OUTPUT. ARCH -------------------------------------------------- Set ARCH to the architecture to be built. In most cases the name of the architecture is the same as the directory name found in the arch/ directory. -But some architectures suach as x86 and sparc has aliases. +But some architectures such as x86 and sparc have aliases. x86: i386 for 32 bit, x86_64 for 64 bit sparc: sparc for 32 bit, sparc64 for 64 bit @@ -63,7 +63,7 @@ CF is often used on the command-line like this: INSTALL_PATH -------------------------------------------------- INSTALL_PATH specifies where to place the updated kernel and system map -images. Default is /boot, but you can set it to other values +images. Default is /boot, but you can set it to other values. MODLIB @@ -90,7 +90,7 @@ INSTALL_MOD_STRIP will used as the options to the strip command. INSTALL_FW_PATH -------------------------------------------------- -INSTALL_FW_PATH specify where to install the firmware blobs. +INSTALL_FW_PATH specifies where to install the firmware blobs. The default value is: $(INSTALL_MOD_PATH)/lib/firmware @@ -99,7 +99,7 @@ The value can be overridden in which case the default value is ignored. INSTALL_HDR_PATH -------------------------------------------------- -INSTALL_HDR_PATH specify where to install user space headers when +INSTALL_HDR_PATH specifies where to install user space headers when executing "make headers_*". The default value is: @@ -112,22 +112,23 @@ The value can be overridden in which case the default value is ignored. KBUILD_MODPOST_WARN -------------------------------------------------- -KBUILD_MODPOST_WARN can be set to avoid error out in case of undefined -symbols in the final module linking stage. +KBUILD_MODPOST_WARN can be set to avoid errors in case of undefined +symbols in the final module linking stage. It changes such errors +into warnings. -KBUILD_MODPOST_FINAL +KBUILD_MODPOST_NOFINAL -------------------------------------------------- KBUILD_MODPOST_NOFINAL can be set to skip the final link of modules. -This is solely usefull to speed up test compiles. +This is solely useful to speed up test compiles. KBUILD_EXTRA_SYMBOLS -------------------------------------------------- -For modules use symbols from another modules. +For modules that use symbols from other modules. See more details in modules.txt. ALLSOURCE_ARCHS -------------------------------------------------- -For tags/TAGS/cscope targets, you can specify more than one archs -to be included in the databases, separated by blankspace. e.g. +For tags/TAGS/cscope targets, you can specify more than one arch +to be included in the databases, separated by blank space. E.g.: $ make ALLSOURCE_ARCHS="x86 mips arm" tags diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 8511d3532c2..d8362cf9909 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -577,9 +577,6 @@ and is between 256 and 4096 characters. It is defined in the file a memory unit (amount[KMG]). See also Documentation/kdump/kdump.txt for a example. - cs4232= [HW,OSS] - Format: <io>,<irq>,<dma>,<dma2>,<mpuio>,<mpuirq> - cs89x0_dma= [HW,NET] Format: <dma> @@ -732,10 +729,6 @@ and is between 256 and 4096 characters. It is defined in the file Default value is 0. Value can be changed at runtime via /selinux/enforce. - es1371= [HW,OSS] - Format: <spdif>,[<nomix>,[<amplifier>]] - See also header of sound/oss/es1371.c. - ether= [HW,NET] Ethernet cards parameters This option is obsoleted by the "netdev=" option, which has equivalent usage. See its documentation for details. diff --git a/Documentation/networking/netconsole.txt b/Documentation/networking/netconsole.txt index 3c2f2b32863..8d022073e3e 100644 --- a/Documentation/networking/netconsole.txt +++ b/Documentation/networking/netconsole.txt @@ -51,7 +51,8 @@ Built-in netconsole starts immediately after the TCP stack is initialized and attempts to bring up the supplied dev at the supplied address. -The remote host can run either 'netcat -u -l -p <port>' or syslogd. +The remote host can run either 'netcat -u -l -p <port>', +'nc -l -u <port>' or syslogd. Dynamic reconfiguration: ======================== diff --git a/Documentation/sound/alsa/HD-Audio-Models.txt b/Documentation/sound/alsa/HD-Audio-Models.txt index 64eb1100eec..0f5d26bea80 100644 --- a/Documentation/sound/alsa/HD-Audio-Models.txt +++ b/Documentation/sound/alsa/HD-Audio-Models.txt @@ -349,6 +349,7 @@ STAC92HD73* STAC92HD83* =========== ref Reference board + mic-ref Reference board with power managment for ports STAC9872 ======== diff --git a/Documentation/x86/boot.txt b/Documentation/x86/boot.txt index 7b4596ac412..12299697b7c 100644 --- a/Documentation/x86/boot.txt +++ b/Documentation/x86/boot.txt @@ -158,7 +158,7 @@ Offset Proto Name Meaning 0202/4 2.00+ header Magic signature "HdrS" 0206/2 2.00+ version Boot protocol version supported 0208/4 2.00+ realmode_swtch Boot loader hook (see below) -020C/2 2.00+ start_sys The load-low segment (0x1000) (obsolete) +020C/2 2.00+ start_sys_seg The load-low segment (0x1000) (obsolete) 020E/2 2.00+ kernel_version Pointer to kernel version string 0210/1 2.00+ type_of_loader Boot loader identifier 0211/1 2.00+ loadflags Boot protocol option flags @@ -170,10 +170,11 @@ Offset Proto Name Meaning 0224/2 2.01+ heap_end_ptr Free memory after setup end 0226/2 N/A pad1 Unused 0228/4 2.02+ cmd_line_ptr 32-bit pointer to the kernel command line -022C/4 2.03+ initrd_addr_max Highest legal initrd address +022C/4 2.03+ ramdisk_max Highest legal initrd address 0230/4 2.05+ kernel_alignment Physical addr alignment required for kernel 0234/1 2.05+ relocatable_kernel Whether kernel is relocatable or not -0235/3 N/A pad2 Unused +0235/1 N/A pad2 Unused +0236/2 N/A pad3 Unused 0238/4 2.06+ cmdline_size Maximum size of the kernel command line 023C/4 2.07+ hardware_subarch Hardware subarchitecture 0240/8 2.07+ hardware_subarch_data Subarchitecture-specific data @@ -299,14 +300,14 @@ Protocol: 2.00+ e.g. 0x0204 for version 2.04, and 0x0a11 for a hypothetical version 10.17. -Field name: readmode_swtch +Field name: realmode_swtch Type: modify (optional) Offset/size: 0x208/4 Protocol: 2.00+ Boot loader hook (see ADVANCED BOOT LOADER HOOKS below.) -Field name: start_sys +Field name: start_sys_seg Type: read Offset/size: 0x20c/2 Protocol: 2.00+ @@ -468,7 +469,7 @@ Protocol: 2.02+ zero, the kernel will assume that your boot loader does not support the 2.02+ protocol. -Field name: initrd_addr_max +Field name: ramdisk_max Type: read Offset/size: 0x22c/4 Protocol: 2.03+ diff --git a/MAINTAINERS b/MAINTAINERS index 3fe4dc2c256..d992d407197 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -2102,7 +2102,8 @@ M: khali@linux-fr.org P: Ben Dooks (embedded platforms) M: ben-linux@fluff.org L: linux-i2c@vger.kernel.org -T: quilt http://khali.linux-fr.org/devel/linux-2.6/jdelvare-i2c/ +W: http://i2c.wiki.kernel.org/ +T: quilt kernel.org/pub/linux/kernel/people/jdelvare/linux-2.6/jdelvare-i2c/ S: Maintained I2C-TINY-USB DRIVER @@ -1,7 +1,7 @@ VERSION = 2 PATCHLEVEL = 6 SUBLEVEL = 29 -EXTRAVERSION = -rc2 +EXTRAVERSION = -rc3 NAME = Erotic Pickled Herring # *DOCUMENTATION* @@ -213,6 +213,10 @@ endif # Where to locate arch specific headers hdr-arch := $(SRCARCH) +ifeq ($(ARCH),m68knommu) + hdr-arch := m68k +endif + KCONFIG_CONFIG ?= .config # SHELL used by kbuild @@ -606,25 +610,20 @@ export INSTALL_PATH ?= /boot MODLIB = $(INSTALL_MOD_PATH)/lib/modules/$(KERNELRELEASE) export MODLIB -strip-symbols := $(srctree)/scripts/strip-symbols \ - $(wildcard $(srctree)/arch/$(ARCH)/scripts/strip-symbols) - # -# INSTALL_MOD_STRIP, if defined, will cause modules to be stripped while -# they get installed. If INSTALL_MOD_STRIP is '1', then the default -# options (see below) will be used. Otherwise, INSTALL_MOD_STRIP will -# be used as the option(s) to the objcopy command. +# INSTALL_MOD_STRIP, if defined, will cause modules to be +# stripped after they are installed. If INSTALL_MOD_STRIP is '1', then +# the default option --strip-debug will be used. Otherwise, +# INSTALL_MOD_STRIP will used as the options to the strip command. + ifdef INSTALL_MOD_STRIP ifeq ($(INSTALL_MOD_STRIP),1) -mod_strip_cmd = $(OBJCOPY) --strip-debug -ifeq ($(CONFIG_KALLSYMS_ALL),$(CONFIG_KALLSYMS_STRIP_GENERATED)) -mod_strip_cmd += --wildcard $(addprefix --strip-symbols ,$(strip-symbols)) -endif +mod_strip_cmd = $(STRIP) --strip-debug else -mod_strip_cmd = $(OBJCOPY) $(INSTALL_MOD_STRIP) +mod_strip_cmd = $(STRIP) $(INSTALL_MOD_STRIP) endif # INSTALL_MOD_STRIP=1 else -mod_strip_cmd = false +mod_strip_cmd = true endif # INSTALL_MOD_STRIP export mod_strip_cmd @@ -754,7 +753,6 @@ last_kallsyms := 2 endif kallsyms.o := .tmp_kallsyms$(last_kallsyms).o -kallsyms.h := $(wildcard include/config/kallsyms/*.h) $(wildcard include/config/kallsyms/*/*.h) define verify_kallsyms $(Q)$(if $($(quiet)cmd_sysmap), \ @@ -779,41 +777,24 @@ endef # Generate .S file with all kernel symbols quiet_cmd_kallsyms = KSYM $@ - cmd_kallsyms = { test $* -eq 0 || $(NM) -n $<; } \ - | $(KALLSYMS) $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) >$@ + cmd_kallsyms = $(NM) -n $< | $(KALLSYMS) \ + $(if $(CONFIG_KALLSYMS_ALL),--all-symbols) > $@ -quiet_cmd_kstrip = STRIP $@ - cmd_kstrip = $(OBJCOPY) --wildcard $(addprefix --strip$(if $(CONFIG_RELOCATABLE),-unneeded)-symbols ,$(filter %/scripts/strip-symbols,$^)) $< $@ - -$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): KBUILD_AFLAGS += -Wa,--strip-local-absolute -$(foreach n,0 1 2 3,.tmp_kallsyms$(n).o): %.o: %.S scripts FORCE +.tmp_kallsyms1.o .tmp_kallsyms2.o .tmp_kallsyms3.o: %.o: %.S scripts FORCE $(call if_changed_dep,as_o_S) -ifeq ($(CONFIG_KALLSYMS_STRIP_GENERATED),y) -strip-ext := .stripped -endif - -.tmp_kallsyms%.S: .tmp_vmlinux%$(strip-ext) $(KALLSYMS) $(kallsyms.h) +.tmp_kallsyms%.S: .tmp_vmlinux% $(KALLSYMS) $(call cmd,kallsyms) -# make -jN seems to have problems with intermediate files, see bug #3330. -.SECONDARY: $(foreach n,1 2 3,.tmp_vmlinux$(n).stripped) -.tmp_vmlinux%.stripped: .tmp_vmlinux% $(strip-symbols) $(kallsyms.h) - $(call cmd,kstrip) - -ifneq ($(CONFIG_DEBUG_INFO),y) -.tmp_vmlinux%: LDFLAGS_vmlinux += -S -endif # .tmp_vmlinux1 must be complete except kallsyms, so update vmlinux version -.tmp_vmlinux%: $(vmlinux-lds) $(vmlinux-all) FORCE - $(if $(filter 1,$*),$(call if_changed_rule,ksym_ld),$(call if_changed,vmlinux__)) +.tmp_vmlinux1: $(vmlinux-lds) $(vmlinux-all) FORCE + $(call if_changed_rule,ksym_ld) -.tmp_vmlinux0$(strip-ext): - $(Q)echo "placeholder" >$@ +.tmp_vmlinux2: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms1.o FORCE + $(call if_changed,vmlinux__) -.tmp_vmlinux1: .tmp_kallsyms0.o -.tmp_vmlinux2: .tmp_kallsyms1.o -.tmp_vmlinux3: .tmp_kallsyms2.o +.tmp_vmlinux3: $(vmlinux-lds) $(vmlinux-all) .tmp_kallsyms2.o FORCE + $(call if_changed,vmlinux__) # Needs to visit scripts/ before $(KALLSYMS) can be used. $(KALLSYMS): scripts ; diff --git a/arch/alpha/kernel/irq.c b/arch/alpha/kernel/irq.c index 703731accda..7bc7489223f 100644 --- a/arch/alpha/kernel/irq.c +++ b/arch/alpha/kernel/irq.c @@ -55,7 +55,7 @@ int irq_select_affinity(unsigned int irq) cpu = (cpu < (NR_CPUS-1) ? cpu + 1 : 0); last_cpu = cpu; - irq_desc[irq].affinity = cpumask_of_cpu(cpu); + cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu)); irq_desc[irq].chip->set_affinity(irq, cpumask_of(cpu)); return 0; } diff --git a/arch/arm/common/clkdev.c b/arch/arm/common/clkdev.c index 17a17b49a45..1037bba1832 100644 --- a/arch/arm/common/clkdev.c +++ b/arch/arm/common/clkdev.c @@ -24,6 +24,15 @@ static LIST_HEAD(clocks); static DEFINE_MUTEX(clocks_mutex); +/* + * Find the correct struct clk for the device and connection ID. + * We do slightly fuzzy matching here: + * An entry with a NULL ID is assumed to be a wildcard. + * If an entry has a device ID, it must match + * If an entry has a connection ID, it must match + * Then we take the most specific entry - with the following + * order of precidence: dev+con > dev only > con only. + */ static struct clk *clk_find(const char *dev_id, const char *con_id) { struct clk_lookup *p; @@ -31,13 +40,17 @@ static struct clk *clk_find(const char *dev_id, const char *con_id) int match, best = 0; list_for_each_entry(p, &clocks, node) { - if ((p->dev_id && !dev_id) || (p->con_id && !con_id)) - continue; match = 0; - if (p->dev_id) - match += 2 * (strcmp(p->dev_id, dev_id) == 0); - if (p->con_id) - match += 1 * (strcmp(p->con_id, con_id) == 0); + if (p->dev_id) { + if (!dev_id || strcmp(p->dev_id, dev_id)) + continue; + match += 2; + } + if (p->con_id) { + if (!con_id || strcmp(p->con_id, con_id)) + continue; + match += 1; + } if (match == 0) continue; diff --git a/arch/arm/configs/afeb9260_defconfig b/arch/arm/configs/afeb9260_defconfig index ce909586a34..f7a272cb3da 100644 --- a/arch/arm/configs/afeb9260_defconfig +++ b/arch/arm/configs/afeb9260_defconfig @@ -719,8 +719,8 @@ CONFIG_I2C_GPIO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_AT24=y -# CONFIG_SENSORS_EEPROM is not set +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -744,7 +744,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/ams_delta_defconfig b/arch/arm/configs/ams_delta_defconfig index 2c4aa11f0b0..764732529ea 100644 --- a/arch/arm/configs/ams_delta_defconfig +++ b/arch/arm/configs/ams_delta_defconfig @@ -767,7 +767,7 @@ CONFIG_I2C_OMAP=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/at91cap9adk_defconfig b/arch/arm/configs/at91cap9adk_defconfig index bf97801a106..bc6bd9f6174 100644 --- a/arch/arm/configs/at91cap9adk_defconfig +++ b/arch/arm/configs/at91cap9adk_defconfig @@ -676,7 +676,7 @@ CONFIG_I2C_CHARDEV=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -703,7 +703,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/at91rm9200dk_defconfig b/arch/arm/configs/at91rm9200dk_defconfig index 868fb7b9530..238b218394e 100644 --- a/arch/arm/configs/at91rm9200dk_defconfig +++ b/arch/arm/configs/at91rm9200dk_defconfig @@ -636,7 +636,7 @@ CONFIG_I2C_GPIO=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/at91rm9200ek_defconfig b/arch/arm/configs/at91rm9200ek_defconfig index de43fc67561..9f7a99ace51 100644 --- a/arch/arm/configs/at91rm9200ek_defconfig +++ b/arch/arm/configs/at91rm9200ek_defconfig @@ -610,7 +610,7 @@ CONFIG_I2C_GPIO=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/at91sam9260ek_defconfig b/arch/arm/configs/at91sam9260ek_defconfig index 38e6a0abeb4..e0ee7060f9a 100644 --- a/arch/arm/configs/at91sam9260ek_defconfig +++ b/arch/arm/configs/at91sam9260ek_defconfig @@ -582,7 +582,7 @@ CONFIG_I2C_GPIO=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/at91sam9261ek_defconfig b/arch/arm/configs/at91sam9261ek_defconfig index 93b779f94b4..01d1ef97d8b 100644 --- a/arch/arm/configs/at91sam9261ek_defconfig +++ b/arch/arm/configs/at91sam9261ek_defconfig @@ -660,7 +660,7 @@ CONFIG_I2C_GPIO=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -687,7 +687,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/at91sam9263ek_defconfig b/arch/arm/configs/at91sam9263ek_defconfig index a7ddd94363c..036a126725c 100644 --- a/arch/arm/configs/at91sam9263ek_defconfig +++ b/arch/arm/configs/at91sam9263ek_defconfig @@ -670,7 +670,7 @@ CONFIG_I2C_GPIO=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -697,7 +697,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/at91sam9g20ek_defconfig b/arch/arm/configs/at91sam9g20ek_defconfig index df0d6ee672b..7e018a04c31 100644 --- a/arch/arm/configs/at91sam9g20ek_defconfig +++ b/arch/arm/configs/at91sam9g20ek_defconfig @@ -665,7 +665,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/at91sam9rlek_defconfig b/arch/arm/configs/at91sam9rlek_defconfig index 811bebbdc78..237a2a6a851 100644 --- a/arch/arm/configs/at91sam9rlek_defconfig +++ b/arch/arm/configs/at91sam9rlek_defconfig @@ -566,7 +566,7 @@ CONFIG_I2C_GPIO=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -593,7 +593,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/ateb9200_defconfig b/arch/arm/configs/ateb9200_defconfig index 85c80f723d8..a19e824cf7f 100644 --- a/arch/arm/configs/ateb9200_defconfig +++ b/arch/arm/configs/ateb9200_defconfig @@ -723,7 +723,7 @@ CONFIG_I2C_GPIO=m # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/badge4_defconfig b/arch/arm/configs/badge4_defconfig index b2bbf217c70..80222feb7da 100644 --- a/arch/arm/configs/badge4_defconfig +++ b/arch/arm/configs/badge4_defconfig @@ -750,7 +750,7 @@ CONFIG_I2C_ELEKTOR=m # Other I2C Chip support # # CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set diff --git a/arch/arm/configs/cam60_defconfig b/arch/arm/configs/cam60_defconfig index f945105d6cd..8448108347c 100644 --- a/arch/arm/configs/cam60_defconfig +++ b/arch/arm/configs/cam60_defconfig @@ -722,7 +722,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -749,7 +749,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/cm_x300_defconfig b/arch/arm/configs/cm_x300_defconfig index 46f1c9dc350..227da0843ea 100644 --- a/arch/arm/configs/cm_x300_defconfig +++ b/arch/arm/configs/cm_x300_defconfig @@ -763,8 +763,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/colibri_defconfig b/arch/arm/configs/colibri_defconfig index c3e3418ed4f..744086fff41 100644 --- a/arch/arm/configs/colibri_defconfig +++ b/arch/arm/configs/colibri_defconfig @@ -801,7 +801,7 @@ CONFIG_I2C_CHARDEV=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/corgi_defconfig b/arch/arm/configs/corgi_defconfig index 98765438048..d6cd165e931 100644 --- a/arch/arm/configs/corgi_defconfig +++ b/arch/arm/configs/corgi_defconfig @@ -982,8 +982,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -1008,7 +1008,7 @@ CONFIG_SPI_PXA2XX=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/arm/configs/csb337_defconfig b/arch/arm/configs/csb337_defconfig index 67e65e4f0cd..29f68c2effe 100644 --- a/arch/arm/configs/csb337_defconfig +++ b/arch/arm/configs/csb337_defconfig @@ -679,7 +679,7 @@ CONFIG_I2C_GPIO=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/csb637_defconfig b/arch/arm/configs/csb637_defconfig index 99702146c9f..f7b60ceed6c 100644 --- a/arch/arm/configs/csb637_defconfig +++ b/arch/arm/configs/csb637_defconfig @@ -704,7 +704,7 @@ CONFIG_I2C_CHARDEV=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/ecbat91_defconfig b/arch/arm/configs/ecbat91_defconfig index cfeb817ad21..ca520733bdb 100644 --- a/arch/arm/configs/ecbat91_defconfig +++ b/arch/arm/configs/ecbat91_defconfig @@ -721,7 +721,7 @@ CONFIG_I2C_GPIO=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -747,7 +747,7 @@ CONFIG_SPI_AT91=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # diff --git a/arch/arm/configs/ep93xx_defconfig b/arch/arm/configs/ep93xx_defconfig index 21aa013793c..3f89d5f25bc 100644 --- a/arch/arm/configs/ep93xx_defconfig +++ b/arch/arm/configs/ep93xx_defconfig @@ -681,7 +681,7 @@ CONFIG_I2C_ALGOBIT=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/ezx_defconfig b/arch/arm/configs/ezx_defconfig index 2a84d557adc..d5ee16e6abf 100644 --- a/arch/arm/configs/ezx_defconfig +++ b/arch/arm/configs/ezx_defconfig @@ -877,7 +877,7 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -900,7 +900,7 @@ CONFIG_SPI_PXA2XX=m # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_HAVE_GPIO_LIB=y diff --git a/arch/arm/configs/footbridge_defconfig b/arch/arm/configs/footbridge_defconfig index 299dc22294a..6ace512fa10 100644 --- a/arch/arm/configs/footbridge_defconfig +++ b/arch/arm/configs/footbridge_defconfig @@ -801,7 +801,7 @@ CONFIG_I2C=m # # Other I2C Chip support # -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set diff --git a/arch/arm/configs/iop13xx_defconfig b/arch/arm/configs/iop13xx_defconfig index 482e5706105..89c17761726 100644 --- a/arch/arm/configs/iop13xx_defconfig +++ b/arch/arm/configs/iop13xx_defconfig @@ -744,7 +744,7 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/iop32x_defconfig b/arch/arm/configs/iop32x_defconfig index 8612f58e105..d70177b38f5 100644 --- a/arch/arm/configs/iop32x_defconfig +++ b/arch/arm/configs/iop32x_defconfig @@ -847,7 +847,7 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/iop33x_defconfig b/arch/arm/configs/iop33x_defconfig index 8b0098d19d0..eec48829826 100644 --- a/arch/arm/configs/iop33x_defconfig +++ b/arch/arm/configs/iop33x_defconfig @@ -746,7 +746,7 @@ CONFIG_I2C_IOP3XX=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/ixp2000_defconfig b/arch/arm/configs/ixp2000_defconfig index 84680db6c61..57526c15e85 100644 --- a/arch/arm/configs/ixp2000_defconfig +++ b/arch/arm/configs/ixp2000_defconfig @@ -768,7 +768,7 @@ CONFIG_I2C_IXP2000=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/ixp23xx_defconfig b/arch/arm/configs/ixp23xx_defconfig index 4a2f7b2372d..ef97561ed75 100644 --- a/arch/arm/configs/ixp23xx_defconfig +++ b/arch/arm/configs/ixp23xx_defconfig @@ -900,7 +900,7 @@ CONFIG_I2C_ALGOBIT=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=y +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/ixp4xx_defconfig b/arch/arm/configs/ixp4xx_defconfig index fc14932e3ab..95cd8dfb5f1 100644 --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig @@ -1083,7 +1083,7 @@ CONFIG_I2C_IXP4XX=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -CONFIG_SENSORS_EEPROM=y +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/kafa_defconfig b/arch/arm/configs/kafa_defconfig index 6dd95a2c8d5..9f92fc527f5 100644 --- a/arch/arm/configs/kafa_defconfig +++ b/arch/arm/configs/kafa_defconfig @@ -603,7 +603,7 @@ CONFIG_I2C_GPIO=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index ab8b1e0d0da..4bc38078d58 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -905,8 +905,8 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -930,7 +930,7 @@ CONFIG_SPI_ORION=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/loki_defconfig b/arch/arm/configs/loki_defconfig index 17da7c3b3d5..b720fcffbcd 100644 --- a/arch/arm/configs/loki_defconfig +++ b/arch/arm/configs/loki_defconfig @@ -654,7 +654,7 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -675,7 +675,7 @@ CONFIG_SPI_MASTER=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index 4d11678584d..73ba62b7106 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -678,7 +678,7 @@ CONFIG_I2C_PXA=m # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/msm_defconfig b/arch/arm/configs/msm_defconfig index 3b4ecf2a90d..cc3b06ee24f 100644 --- a/arch/arm/configs/msm_defconfig +++ b/arch/arm/configs/msm_defconfig @@ -580,7 +580,7 @@ CONFIG_I2C_MSM=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set CONFIG_SENSORS_PCA9633=y diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index d38ebf8721a..83c817f31bc 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -832,7 +832,7 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/n770_defconfig b/arch/arm/configs/n770_defconfig index 568ef1770d5..672f6db06a5 100644 --- a/arch/arm/configs/n770_defconfig +++ b/arch/arm/configs/n770_defconfig @@ -767,7 +767,7 @@ CONFIG_I2C_OMAP=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -798,7 +798,7 @@ CONFIG_SPI_OMAP_UWIRE=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_TSC2101 is not set # CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC210X is not set diff --git a/arch/arm/configs/neocore926_defconfig b/arch/arm/configs/neocore926_defconfig index 325f1e105f6..e0e4e98b5aa 100644 --- a/arch/arm/configs/neocore926_defconfig +++ b/arch/arm/configs/neocore926_defconfig @@ -774,8 +774,8 @@ CONFIG_I2C_CHARDEV=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -798,7 +798,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/neponset_defconfig b/arch/arm/configs/neponset_defconfig index 92ccdc6492f..d81ea219c93 100644 --- a/arch/arm/configs/neponset_defconfig +++ b/arch/arm/configs/neponset_defconfig @@ -737,7 +737,7 @@ CONFIG_I2C_ALGOBIT=y # # Other I2C Chip support # -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_RTC8564 is not set diff --git a/arch/arm/configs/omap3_beagle_defconfig b/arch/arm/configs/omap3_beagle_defconfig index e042d27eae1..4c6fb7e959d 100644 --- a/arch/arm/configs/omap3_beagle_defconfig +++ b/arch/arm/configs/omap3_beagle_defconfig @@ -687,8 +687,8 @@ CONFIG_I2C_OMAP=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/arm/configs/omap3_pandora_defconfig b/arch/arm/configs/omap3_pandora_defconfig index 09543f4de5b..b54ad2e2da3 100644 --- a/arch/arm/configs/omap3_pandora_defconfig +++ b/arch/arm/configs/omap3_pandora_defconfig @@ -713,8 +713,8 @@ CONFIG_I2C_OMAP=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -740,7 +740,7 @@ CONFIG_SPI_OMAP24XX=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/arm/configs/omap_2430sdp_defconfig b/arch/arm/configs/omap_2430sdp_defconfig index b0617c0da2a..640e9afc463 100644 --- a/arch/arm/configs/omap_2430sdp_defconfig +++ b/arch/arm/configs/omap_2430sdp_defconfig @@ -710,7 +710,7 @@ CONFIG_I2C_OMAP=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -743,7 +743,7 @@ CONFIG_SPI_MASTER=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_TSC2101 is not set # CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC210X is not set diff --git a/arch/arm/configs/omap_apollon_2420_defconfig b/arch/arm/configs/omap_apollon_2420_defconfig index bb39dfc72d6..ac7adf34c54 100644 --- a/arch/arm/configs/omap_apollon_2420_defconfig +++ b/arch/arm/configs/omap_apollon_2420_defconfig @@ -612,7 +612,7 @@ CONFIG_SPI_OMAP24XX=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_TSC2101 is not set # CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC210X is not set diff --git a/arch/arm/configs/omap_generic_1510_defconfig b/arch/arm/configs/omap_generic_1510_defconfig index 4b1c252f209..ccdc661b585 100644 --- a/arch/arm/configs/omap_generic_1510_defconfig +++ b/arch/arm/configs/omap_generic_1510_defconfig @@ -637,7 +637,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/omap_generic_1610_defconfig b/arch/arm/configs/omap_generic_1610_defconfig index fc66f019d56..0c42c895504 100644 --- a/arch/arm/configs/omap_generic_1610_defconfig +++ b/arch/arm/configs/omap_generic_1610_defconfig @@ -641,7 +641,7 @@ CONFIG_I2C_ALGOBIT=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/omap_h2_1610_defconfig b/arch/arm/configs/omap_h2_1610_defconfig index c03507202f3..74dbdc644d3 100644 --- a/arch/arm/configs/omap_h2_1610_defconfig +++ b/arch/arm/configs/omap_h2_1610_defconfig @@ -700,7 +700,7 @@ CONFIG_I2C_OMAP=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -731,7 +731,7 @@ CONFIG_SPI_OMAP_UWIRE=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_TSC2101=y # CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC210X is not set diff --git a/arch/arm/configs/omap_h4_2420_defconfig b/arch/arm/configs/omap_h4_2420_defconfig index 5bc89185a64..a4aab8e4c29 100644 --- a/arch/arm/configs/omap_h4_2420_defconfig +++ b/arch/arm/configs/omap_h4_2420_defconfig @@ -681,7 +681,7 @@ CONFIG_I2C_OMAP=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/omap_innovator_1510_defconfig b/arch/arm/configs/omap_innovator_1510_defconfig index 55b2611bd90..0cfe363e336 100644 --- a/arch/arm/configs/omap_innovator_1510_defconfig +++ b/arch/arm/configs/omap_innovator_1510_defconfig @@ -631,7 +631,7 @@ CONFIG_I2C_BOARDINFO=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/omap_ldp_defconfig b/arch/arm/configs/omap_ldp_defconfig index b77d054169e..aa9d34feddc 100644 --- a/arch/arm/configs/omap_ldp_defconfig +++ b/arch/arm/configs/omap_ldp_defconfig @@ -629,8 +629,8 @@ CONFIG_I2C_OMAP=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -656,7 +656,7 @@ CONFIG_SPI_OMAP24XX=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/arm/configs/omap_osk_5912_defconfig b/arch/arm/configs/omap_osk_5912_defconfig index b68e0144cab..6b3b5c610da 100644 --- a/arch/arm/configs/omap_osk_5912_defconfig +++ b/arch/arm/configs/omap_osk_5912_defconfig @@ -711,7 +711,7 @@ CONFIG_I2C_OMAP=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/onearm_defconfig b/arch/arm/configs/onearm_defconfig index 418ca2febbe..f8701fadb60 100644 --- a/arch/arm/configs/onearm_defconfig +++ b/arch/arm/configs/onearm_defconfig @@ -698,7 +698,7 @@ CONFIG_I2C_CHARDEV=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index b2456ca544c..a8ee6984a09 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -886,8 +886,8 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/arm/configs/overo_defconfig b/arch/arm/configs/overo_defconfig index 49200967a15..a57f9e4124f 100644 --- a/arch/arm/configs/overo_defconfig +++ b/arch/arm/configs/overo_defconfig @@ -858,8 +858,8 @@ CONFIG_I2C_OMAP=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=y +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -885,7 +885,7 @@ CONFIG_SPI_OMAP24XX=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/arm/configs/palmz71_defconfig b/arch/arm/configs/palmz71_defconfig index 6361922e71c..08e14068fff 100644 --- a/arch/arm/configs/palmz71_defconfig +++ b/arch/arm/configs/palmz71_defconfig @@ -554,7 +554,7 @@ CONFIG_SPI_OMAP_UWIRE=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_TSC2101 is not set # CONFIG_SPI_TSC2102 is not set # CONFIG_SPI_TSC210X is not set diff --git a/arch/arm/configs/palmz72_defconfig b/arch/arm/configs/palmz72_defconfig index 3245f8f33e0..a0dc37c05de 100644 --- a/arch/arm/configs/palmz72_defconfig +++ b/arch/arm/configs/palmz72_defconfig @@ -527,8 +527,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -552,7 +552,7 @@ CONFIG_SPI_MASTER=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/arm/configs/pcm027_defconfig b/arch/arm/configs/pcm027_defconfig index 17b9b246957..05ad96a43b1 100644 --- a/arch/arm/configs/pcm027_defconfig +++ b/arch/arm/configs/pcm027_defconfig @@ -606,7 +606,7 @@ CONFIG_I2C_PXA=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -CONFIG_SENSORS_EEPROM=y +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/pcm038_defconfig b/arch/arm/configs/pcm038_defconfig index 6b798c215ca..41429a00f58 100644 --- a/arch/arm/configs/pcm038_defconfig +++ b/arch/arm/configs/pcm038_defconfig @@ -604,7 +604,7 @@ CONFIG_I2C_BOARDINFO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -626,7 +626,7 @@ CONFIG_SPI_BITBANG=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_HAVE_GPIO_LIB=y diff --git a/arch/arm/configs/picotux200_defconfig b/arch/arm/configs/picotux200_defconfig index 59e4463c2da..9018f0f298a 100644 --- a/arch/arm/configs/picotux200_defconfig +++ b/arch/arm/configs/picotux200_defconfig @@ -744,7 +744,7 @@ CONFIG_I2C_GPIO=m # CONFIG_SENSORS_DS1337=m CONFIG_SENSORS_DS1374=m -CONFIG_SENSORS_EEPROM=m +CONFIG_EEPROM_LEGACY=m CONFIG_SENSORS_PCF8574=m CONFIG_SENSORS_PCA9539=m CONFIG_SENSORS_PCF8591=m diff --git a/arch/arm/configs/pnx4008_defconfig b/arch/arm/configs/pnx4008_defconfig index 811b8f60d19..67b5f1e15f4 100644 --- a/arch/arm/configs/pnx4008_defconfig +++ b/arch/arm/configs/pnx4008_defconfig @@ -915,7 +915,7 @@ CONFIG_I2C_ALGOPCA=m # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=m +CONFIG_EEPROM_LEGACY=m CONFIG_SENSORS_PCF8574=m # CONFIG_SENSORS_PCA9539 is not set CONFIG_SENSORS_PCF8591=m diff --git a/arch/arm/configs/qil-a9260_defconfig b/arch/arm/configs/qil-a9260_defconfig index 5cbd8158964..cd1d717903a 100644 --- a/arch/arm/configs/qil-a9260_defconfig +++ b/arch/arm/configs/qil-a9260_defconfig @@ -687,7 +687,7 @@ CONFIG_I2C_CHARDEV=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -714,7 +714,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/rpc_defconfig b/arch/arm/configs/rpc_defconfig index f62d1817d2c..a29d61fe4c6 100644 --- a/arch/arm/configs/rpc_defconfig +++ b/arch/arm/configs/rpc_defconfig @@ -590,7 +590,7 @@ CONFIG_I2C_ACORN=y # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/s3c2410_defconfig b/arch/arm/configs/s3c2410_defconfig index 35faaea8623..65a583ee5df 100644 --- a/arch/arm/configs/s3c2410_defconfig +++ b/arch/arm/configs/s3c2410_defconfig @@ -923,7 +923,7 @@ CONFIG_I2C_SIMTEC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_SENSORS_EEPROM=m +CONFIG_EEPROM_LEGACY=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -950,7 +950,7 @@ CONFIG_SPI_S3C24XX_GPIO=m # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_HAVE_GPIO_LIB=y diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig index cf3c1b5d704..2e8fa50e9a0 100644 --- a/arch/arm/configs/s3c6400_defconfig +++ b/arch/arm/configs/s3c6400_defconfig @@ -465,8 +465,8 @@ CONFIG_I2C_S3C2410=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_AT24=y -# CONFIG_SENSORS_EEPROM is not set +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/arm/configs/spitz_defconfig b/arch/arm/configs/spitz_defconfig index 4df5b4db2aa..745c68ffb88 100644 --- a/arch/arm/configs/spitz_defconfig +++ b/arch/arm/configs/spitz_defconfig @@ -977,8 +977,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -1003,7 +1003,7 @@ CONFIG_SPI_PXA2XX=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/arm/configs/sx1_defconfig b/arch/arm/configs/sx1_defconfig index 853dcdd9f2e..25b007ff8ba 100644 --- a/arch/arm/configs/sx1_defconfig +++ b/arch/arm/configs/sx1_defconfig @@ -610,7 +610,7 @@ CONFIG_I2C_OMAP=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/trizeps4_defconfig b/arch/arm/configs/trizeps4_defconfig index 9033d147f05..b6f83819781 100644 --- a/arch/arm/configs/trizeps4_defconfig +++ b/arch/arm/configs/trizeps4_defconfig @@ -948,7 +948,7 @@ CONFIG_I2C_PXA_SLAVE=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/usb-a9260_defconfig b/arch/arm/configs/usb-a9260_defconfig index fcb4aaabd43..fd7774033d6 100644 --- a/arch/arm/configs/usb-a9260_defconfig +++ b/arch/arm/configs/usb-a9260_defconfig @@ -676,7 +676,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/usb-a9263_defconfig b/arch/arm/configs/usb-a9263_defconfig index b786e0407e8..e7c19dd9255 100644 --- a/arch/arm/configs/usb-a9263_defconfig +++ b/arch/arm/configs/usb-a9263_defconfig @@ -668,7 +668,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/arm/configs/versatile_defconfig b/arch/arm/configs/versatile_defconfig index 8355f88f729..b11c5da3996 100644 --- a/arch/arm/configs/versatile_defconfig +++ b/arch/arm/configs/versatile_defconfig @@ -611,7 +611,7 @@ CONFIG_I2C_ALGOBIT=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -CONFIG_SENSORS_EEPROM=m +CONFIG_EEPROM_LEGACY=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig index d01fecb8673..30f463d2fa8 100644 --- a/arch/arm/configs/viper_defconfig +++ b/arch/arm/configs/viper_defconfig @@ -860,8 +860,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/arm/configs/xm_x2xx_defconfig b/arch/arm/configs/xm_x2xx_defconfig index f891364dece..1039f366bf8 100644 --- a/arch/arm/configs/xm_x2xx_defconfig +++ b/arch/arm/configs/xm_x2xx_defconfig @@ -1009,8 +1009,8 @@ CONFIG_I2C_PXA=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/arm/configs/yl9200_defconfig b/arch/arm/configs/yl9200_defconfig index a9f41c24c9d..9192e597767 100644 --- a/arch/arm/configs/yl9200_defconfig +++ b/arch/arm/configs/yl9200_defconfig @@ -682,7 +682,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set diff --git a/arch/arm/kernel/irq.c b/arch/arm/kernel/irq.c index 7141cee1fab..4bb723eadad 100644 --- a/arch/arm/kernel/irq.c +++ b/arch/arm/kernel/irq.c @@ -104,6 +104,11 @@ static struct irq_desc bad_irq_desc = { .lock = SPIN_LOCK_UNLOCKED }; +#ifdef CONFIG_CPUMASK_OFFSTACK +/* We are not allocating bad_irq_desc.affinity or .pending_mask */ +#error "ARM architecture does not support CONFIG_CPUMASK_OFFSTACK." +#endif + /* * do_IRQ handles all hardware IRQ's. Decoded IRQs should not * come via this function. Instead, they should provide their @@ -161,7 +166,7 @@ void __init init_IRQ(void) irq_desc[irq].status |= IRQ_NOREQUEST | IRQ_NOPROBE; #ifdef CONFIG_SMP - bad_irq_desc.affinity = CPU_MASK_ALL; + cpumask_setall(bad_irq_desc.affinity); bad_irq_desc.cpu = smp_processor_id(); #endif init_arch_irq(); @@ -191,15 +196,16 @@ void migrate_irqs(void) struct irq_desc *desc = irq_desc + i; if (desc->cpu == cpu) { - unsigned int newcpu = any_online_cpu(desc->affinity); - - if (newcpu == NR_CPUS) { + unsigned int newcpu = cpumask_any_and(desc->affinity, + cpu_online_mask); + if (newcpu >= nr_cpu_ids) { if (printk_ratelimit()) printk(KERN_INFO "IRQ%u no longer affine to CPU%u\n", i, cpu); - cpus_setall(desc->affinity); - newcpu = any_online_cpu(desc->affinity); + cpumask_setall(desc->affinity); + newcpu = cpumask_any_and(desc->affinity, + cpu_online_mask); } route_irq(desc, i, newcpu); diff --git a/arch/arm/kernel/vmlinux.lds.S b/arch/arm/kernel/vmlinux.lds.S index 00216071eaf..85598f7da40 100644 --- a/arch/arm/kernel/vmlinux.lds.S +++ b/arch/arm/kernel/vmlinux.lds.S @@ -65,6 +65,7 @@ SECTIONS #endif . = ALIGN(4096); __per_cpu_start = .; + *(.data.percpu.page_aligned) *(.data.percpu) *(.data.percpu.shared_aligned) __per_cpu_end = .; diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index fe182a85159..867ead2559a 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -12,6 +12,7 @@ #include <mach/common.h> #include <mach/hardware.h> +#include <mach/irqs.h> #if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE) static struct musb_hdrc_eps_bits musb_eps[] = { @@ -76,29 +77,6 @@ static struct platform_device usb_dev = { .num_resources = ARRAY_SIZE(usb_resources), }; -#ifdef CONFIG_USB_MUSB_OTG - -static struct otg_transceiver *xceiv; - -struct otg_transceiver *otg_get_transceiver(void) -{ - if (xceiv) - get_device(xceiv->dev); - return xceiv; -} -EXPORT_SYMBOL(otg_get_transceiver); - -int otg_set_transceiver(struct otg_transceiver *x) -{ - if (xceiv && x) - return -EBUSY; - xceiv = x; - return 0; -} -EXPORT_SYMBOL(otg_set_transceiver); - -#endif - void __init setup_usb(unsigned mA, unsigned potpgt_msec) { usb_data.power = mA / 2; diff --git a/arch/arm/mach-integrator/clock.h b/arch/arm/mach-integrator/clock.h deleted file mode 100644 index e69de29bb2d..00000000000 --- a/arch/arm/mach-integrator/clock.h +++ /dev/null diff --git a/arch/arm/mach-omap1/board-h2.c b/arch/arm/mach-omap1/board-h2.c index b240c5f861d..0d784a79509 100644 --- a/arch/arm/mach-omap1/board-h2.c +++ b/arch/arm/mach-omap1/board-h2.c @@ -37,16 +37,14 @@ #include <asm/mach/flash.h> #include <asm/mach/map.h> -#include <mach/gpio-switch.h> #include <mach/mux.h> +#include <mach/dma.h> #include <mach/tc.h> #include <mach/nand.h> #include <mach/irda.h> #include <mach/usb.h> #include <mach/keypad.h> #include <mach/common.h> -#include <mach/mcbsp.h> -#include <mach/omap-alsa.h> static int h2_keymap[] = { KEY(0, 0, KEY_LEFT), @@ -292,41 +290,6 @@ static struct platform_device h2_lcd_device = { .id = -1, }; -static struct omap_mcbsp_reg_cfg mcbsp_regs = { - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), - .spcr1 = RINTM(3) | RRST, - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1), - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG, - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), - .srgr1 = FWID(15), - .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), - - .pcr0 = CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP, - /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */ -}; - -static struct omap_alsa_codec_config alsa_config = { - .name = "H2 TSC2101", - .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, /* tsc2101_configure, */ - .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */ - .codec_clock_setup = NULL, /* tsc2101_clock_setup, */ - .codec_clock_on = NULL, /* tsc2101_clock_on, */ - .codec_clock_off = NULL, /* tsc2101_clock_off, */ - .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */ -}; - -static struct platform_device h2_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &alsa_config, - }, -}; - static struct platform_device *h2_devices[] __initdata = { &h2_nor_device, &h2_nand_device, @@ -334,7 +297,6 @@ static struct platform_device *h2_devices[] __initdata = { &h2_irda_device, &h2_kp_device, &h2_lcd_device, - &h2_mcbsp1_device, }; static void __init h2_init_smc91x(void) @@ -409,11 +371,6 @@ static struct omap_board_config_kernel h2_config[] __initdata = { #define H2_NAND_RB_GPIO_PIN 62 -static int h2_nand_dev_ready(struct omap_nand_platform_data *data) -{ - return gpio_get_value(H2_NAND_RB_GPIO_PIN); -} - static void __init h2_init(void) { /* Here we assume the NOR boot config: NOR on CS3 (possibly swapped diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c index 5157eea9be3..bf08b6ad22e 100644 --- a/arch/arm/mach-omap1/board-h3.c +++ b/arch/arm/mach-omap1/board-h3.c @@ -49,8 +49,6 @@ #include <mach/keypad.h> #include <mach/dma.h> #include <mach/common.h> -#include <mach/mcbsp.h> -#include <mach/omap-alsa.h> #define H3_TS_GPIO 48 @@ -387,41 +385,6 @@ static struct spi_board_info h3_spi_board_info[] __initdata = { }, }; -static struct omap_mcbsp_reg_cfg mcbsp_regs = { - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), - .spcr1 = RINTM(3) | RRST, - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(1), - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(1) | XFIG, - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), - .srgr1 = FWID(15), - .srgr2 = GSYNC | CLKSP | FSGM | FPER(31), - - .pcr0 = CLKRM | SCLKME | FSXP | FSRP | CLKXP | CLKRP, - /*.pcr0 = CLKXP | CLKRP,*/ /* mcbsp: slave */ -}; - -static struct omap_alsa_codec_config alsa_config = { - .name = "H3 TSC2101", - .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, /* tsc2101_configure, */ - .codec_set_samplerate = NULL, /* tsc2101_set_samplerate, */ - .codec_clock_setup = NULL, /* tsc2101_clock_setup, */ - .codec_clock_on = NULL, /* tsc2101_clock_on, */ - .codec_clock_off = NULL, /* tsc2101_clock_off, */ - .get_default_samplerate = NULL, /* tsc2101_get_default_samplerate, */ -}; - -static struct platform_device h3_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &alsa_config, - }, -}; - static struct platform_device *devices[] __initdata = { &nor_device, &nand_device, @@ -430,7 +393,6 @@ static struct platform_device *devices[] __initdata = { &h3_irda_device, &h3_kp_device, &h3_lcd_device, - &h3_mcbsp1_device, }; static struct omap_usb_config h3_usb_config __initdata = { @@ -472,18 +434,6 @@ static struct i2c_board_info __initdata h3_i2c_board_info[] = { }, }; -static struct omap_gpio_switch h3_gpio_switches[] __initdata = { - { - .name = "mmc_slot", - .gpio = OMAP_MPUIO(1), - .type = OMAP_GPIO_SWITCH_TYPE_COVER, - .debounce_rising = 100, - .debounce_falling = 0, - .notify = h3_mmc_slot_cover_handler, - .notify_data = NULL, - }, -}; - #define H3_NAND_RB_GPIO_PIN 10 static int nand_dev_ready(struct omap_nand_platform_data *data) diff --git a/arch/arm/mach-omap1/board-innovator.c b/arch/arm/mach-omap1/board-innovator.c index af2fb907008..071cd02a734 100644 --- a/arch/arm/mach-omap1/board-innovator.c +++ b/arch/arm/mach-omap1/board-innovator.c @@ -37,8 +37,6 @@ #include <mach/usb.h> #include <mach/keypad.h> #include <mach/common.h> -#include <mach/mcbsp.h> -#include <mach/omap-alsa.h> #include <mach/mmc.h> static int innovator_keymap[] = { @@ -115,42 +113,6 @@ static struct platform_device innovator_flash_device = { .resource = &innovator_flash_resource, }; -#define DEFAULT_BITPERSAMPLE 16 - -static struct omap_mcbsp_reg_cfg mcbsp_regs = { - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), - .spcr1 = RINTM(3) | RRST, - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), - .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), - .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1), - /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */ - .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ -}; - -static struct omap_alsa_codec_config alsa_config = { - .name = "OMAP Innovator AIC23", - .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, /* aic23_configure, */ - .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ - .codec_clock_setup = NULL, /* aic23_clock_setup, */ - .codec_clock_on = NULL, /* aic23_clock_on, */ - .codec_clock_off = NULL, /* aic23_clock_off, */ - .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ -}; - -static struct platform_device innovator_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &alsa_config, - }, -}; - static struct resource innovator_kp_resources[] = { [0] = { .start = INT_KEYBOARD, @@ -227,7 +189,6 @@ static struct platform_device innovator1510_spi_device = { static struct platform_device *innovator1510_devices[] __initdata = { &innovator_flash_device, &innovator1510_smc91x_device, - &innovator_mcbsp1_device, &innovator_kp_device, &innovator1510_lcd_device, &innovator1510_spi_device, diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c index 4970c402a59..af51e0b180f 100644 --- a/arch/arm/mach-omap1/board-nokia770.c +++ b/arch/arm/mach-omap1/board-nokia770.c @@ -32,7 +32,6 @@ #include <mach/keypad.h> #include <mach/common.h> #include <mach/dsp_common.h> -#include <mach/aic23.h> #include <mach/omapfb.h> #include <mach/lcd_mipid.h> #include <mach/mmc.h> @@ -261,6 +260,13 @@ static DEFINE_MUTEX(audio_pwr_lock); */ static int audio_pwr_state = -1; +static inline void aic23_power_up(void) +{ +} +static inline void aic23_power_down(void) +{ +} + /* * audio_pwr_up / down should be called under audio_pwr_lock */ diff --git a/arch/arm/mach-omap1/board-osk.c b/arch/arm/mach-omap1/board-osk.c index ff9e67baa5c..1a16ecb2ccc 100644 --- a/arch/arm/mach-omap1/board-osk.c +++ b/arch/arm/mach-omap1/board-osk.c @@ -51,8 +51,6 @@ #include <mach/mux.h> #include <mach/tc.h> #include <mach/common.h> -#include <mach/mcbsp.h> -#include <mach/omap-alsa.h> static struct mtd_partition osk_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ @@ -141,47 +139,10 @@ static struct platform_device osk5912_cf_device = { .resource = osk5912_cf_resources, }; -#define DEFAULT_BITPERSAMPLE 16 - -static struct omap_mcbsp_reg_cfg mcbsp_regs = { - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), - .spcr1 = RINTM(3) | RRST, - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), - .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), - .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1), - /*.pcr0 = FSXM | FSRM | CLKXM | CLKRM | CLKXP | CLKRP,*/ /* mcbsp: master */ - .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ -}; - -static struct omap_alsa_codec_config alsa_config = { - .name = "OSK AIC23", - .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, /* aic23_configure, */ - .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ - .codec_clock_setup = NULL, /* aic23_clock_setup, */ - .codec_clock_on = NULL, /* aic23_clock_on, */ - .codec_clock_off = NULL, /* aic23_clock_off, */ - .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ -}; - -static struct platform_device osk5912_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &alsa_config, - }, -}; - static struct platform_device *osk5912_devices[] __initdata = { &osk5912_flash_device, &osk5912_smc91x_device, &osk5912_cf_device, - &osk5912_mcbsp1_device, }; static struct gpio_led tps_leds[] = { @@ -259,8 +220,10 @@ static struct i2c_board_info __initdata osk_i2c_board_info[] = { .platform_data = &tps_board, }, + { + I2C_BOARD_INFO("tlv320aic23", 0x1B), + }, /* TODO when driver support is ready: - * - aic23 audio chip at 0x1a * - optionally on Mistral, ov9640 camera sensor at 0x30 */ }; diff --git a/arch/arm/mach-omap1/board-palmte.c b/arch/arm/mach-omap1/board-palmte.c index 75e32d35afd..99f2b43f254 100644 --- a/arch/arm/mach-omap1/board-palmte.c +++ b/arch/arm/mach-omap1/board-palmte.c @@ -42,8 +42,6 @@ #include <mach/irda.h> #include <mach/keypad.h> #include <mach/common.h> -#include <mach/mcbsp.h> -#include <mach/omap-alsa.h> static void __init omap_palmte_init_irq(void) { @@ -195,15 +193,6 @@ static struct omap_usb_config palmte_usb_config __initdata = { .pins[0] = 2, }; -static struct omap_mmc_config palmte_mmc_config __initdata = { - .mmc[0] = { - .enabled = 1, - .wp_pin = PALMTE_MMC_WP_GPIO, - .power_pin = PALMTE_MMC_POWER_GPIO, - .switch_pin = PALMTE_MMC_SWITCH_GPIO, - }, -}; - static struct omap_lcd_config palmte_lcd_config __initdata = { .ctrl_name = "internal", }; @@ -212,24 +201,6 @@ static struct omap_uart_config palmte_uart_config __initdata = { .enabled_uarts = (1 << 0) | (1 << 1) | (0 << 2), }; -static struct omap_mcbsp_reg_cfg palmte_mcbsp1_regs = { - .spcr2 = FRST | GRST | XRST | XINTM(3), - .xcr2 = XDATDLY(1) | XFIG, - .xcr1 = XWDLEN1(OMAP_MCBSP_WORD_32), - .pcr0 = SCLKME | FSXP | CLKXP, -}; - -static struct omap_alsa_codec_config palmte_alsa_config = { - .name = "TSC2102 audio", - .mcbsp_regs_alsa = &palmte_mcbsp1_regs, - .codec_configure_dev = NULL, /* tsc2102_configure, */ - .codec_set_samplerate = NULL, /* tsc2102_set_samplerate, */ - .codec_clock_setup = NULL, /* tsc2102_clock_setup, */ - .codec_clock_on = NULL, /* tsc2102_clock_on, */ - .codec_clock_off = NULL, /* tsc2102_clock_off, */ - .get_default_samplerate = NULL, /* tsc2102_get_default_samplerate, */ -}; - #ifdef CONFIG_APM /* * Values measured in 10 minute intervals averaged over 10 samples. diff --git a/arch/arm/mach-omap1/board-palmtt.c b/arch/arm/mach-omap1/board-palmtt.c index 5c001afe806..1cbc1275c95 100644 --- a/arch/arm/mach-omap1/board-palmtt.c +++ b/arch/arm/mach-omap1/board-palmtt.c @@ -30,7 +30,6 @@ #include <asm/mach/flash.h> #include <mach/led.h> -#include <mach/mcbsp.h> #include <mach/gpio.h> #include <mach/mux.h> #include <mach/usb.h> @@ -40,7 +39,6 @@ #include <mach/irda.h> #include <mach/keypad.h> #include <mach/common.h> -#include <mach/omap-alsa.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> @@ -122,44 +120,6 @@ static struct platform_device palmtt_flash_device = { .resource = &palmtt_flash_resource, }; -#define DEFAULT_BITPERSAMPLE 16 - -static struct omap_mcbsp_reg_cfg mcbsp_regs = { - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), - .spcr1 = RINTM(3) | RRST, - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | - RWDLEN1(OMAP_MCBSP_WORD_16), - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | - XWDLEN1(OMAP_MCBSP_WORD_16), - .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), - .srgr2 = GSYNC | CLKSP | FSGM | - FPER(DEFAULT_BITPERSAMPLE * 2 - 1), - .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ -}; - -static struct omap_alsa_codec_config alsa_config = { - .name = "PalmTT AIC23", - .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, /* aic23_configure, */ - .codec_set_samplerate = NULL, /* aic23_set_samplerate, */ - .codec_clock_setup = NULL, /* aic23_clock_setup, */ - .codec_clock_on = NULL, /* aic23_clock_on, */ - .codec_clock_off = NULL, /* aic23_clock_off, */ - .get_default_samplerate = NULL, /* aic23_get_default_samplerate, */ -}; - -static struct platform_device palmtt_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &alsa_config, - }, -}; - static struct resource palmtt_kp_resources[] = { [0] = { .start = INT_KEYBOARD, @@ -257,7 +217,6 @@ static struct platform_device palmtt_led_device = { static struct platform_device *palmtt_devices[] __initdata = { &palmtt_flash_device, - &palmtt_mcbsp1_device, &palmtt_kp_device, &palmtt_lcd_device, &palmtt_irda_device, diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index cc05257eb1c..baf5efbfe3e 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -32,7 +32,6 @@ #include <asm/mach/map.h> #include <asm/mach/flash.h> -#include <mach/mcbsp.h> #include <mach/gpio.h> #include <mach/mux.h> #include <mach/usb.h> @@ -179,41 +178,6 @@ static struct platform_device palmz71_spi_device = { .id = -1, }; -#define DEFAULT_BITPERSAMPLE 16 - -static struct omap_mcbsp_reg_cfg mcbsp_regs = { - .spcr2 = FREE | FRST | GRST | XRST | XINTM(3), - .spcr1 = RINTM(3) | RRST, - .rcr2 = RPHASE | RFRLEN2(OMAP_MCBSP_WORD_8) | - RWDLEN2(OMAP_MCBSP_WORD_16) | RDATDLY(0), - .rcr1 = RFRLEN1(OMAP_MCBSP_WORD_8) | RWDLEN1(OMAP_MCBSP_WORD_16), - .xcr2 = XPHASE | XFRLEN2(OMAP_MCBSP_WORD_8) | - XWDLEN2(OMAP_MCBSP_WORD_16) | XDATDLY(0) | XFIG, - .xcr1 = XFRLEN1(OMAP_MCBSP_WORD_8) | XWDLEN1(OMAP_MCBSP_WORD_16), - .srgr1 = FWID(DEFAULT_BITPERSAMPLE - 1), - .srgr2 = GSYNC | CLKSP | FSGM | FPER(DEFAULT_BITPERSAMPLE * 2 - 1), - .pcr0 = CLKXP | CLKRP, /* mcbsp: slave */ -}; - -static struct omap_alsa_codec_config alsa_config = { - .name = "PalmZ71 AIC23", - .mcbsp_regs_alsa = &mcbsp_regs, - .codec_configure_dev = NULL, /* aic23_configure */ - .codec_set_samplerate = NULL, /* aic23_set_samplerate */ - .codec_clock_setup = NULL, /* aic23_clock_setup */ - .codec_clock_on = NULL, /* aic23_clock_on */ - .codec_clock_off = NULL, /* aic23_clock_off */ - .get_default_samplerate = NULL, /* aic23_get_default_samplerate */ -}; - -static struct platform_device palmz71_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &alsa_config, - }, -}; - static struct omap_backlight_config palmz71_backlight_config = { .default_intensity = 0xa0, }; @@ -229,7 +193,6 @@ static struct platform_device palmz71_backlight_device = { static struct platform_device *devices[] __initdata = { &palmz71_rom_device, &palmz71_kp_device, - &palmz71_mcbsp1_device, &palmz71_lcd_device, &palmz71_irda_device, &palmz71_spi_device, diff --git a/arch/arm/mach-omap1/board-sx1.c b/arch/arm/mach-omap1/board-sx1.c index 8171fe0ca08..28c76a1e71c 100644 --- a/arch/arm/mach-omap1/board-sx1.c +++ b/arch/arm/mach-omap1/board-sx1.c @@ -34,13 +34,12 @@ #include <mach/gpio.h> #include <mach/mux.h> +#include <mach/dma.h> #include <mach/irda.h> #include <mach/usb.h> #include <mach/tc.h> #include <mach/board.h> #include <mach/common.h> -#include <mach/mcbsp.h> -#include <mach/omap-alsa.h> #include <mach/keypad.h> /* Write to I2C device */ @@ -254,35 +253,6 @@ static struct platform_device sx1_irda_device = { .resource = sx1_irda_resources, }; -/*----------- McBSP & Sound -------------------------*/ - -/* Playback interface - McBSP1 */ -static struct omap_mcbsp_reg_cfg mcbsp1_regs = { - .spcr2 = XINTM(3), /* SPCR2=30 */ - .spcr1 = RINTM(3), /* SPCR1=30 */ - .rcr2 = 0, /* RCR2 =00 */ - .rcr1 = RFRLEN1(1) | RWDLEN1(OMAP_MCBSP_WORD_16), /* RCR1=140 */ - .xcr2 = 0, /* XCR2 = 0 */ - .xcr1 = XFRLEN1(1) | XWDLEN1(OMAP_MCBSP_WORD_16), /* XCR1 = 140 */ - .srgr1 = FWID(15) | CLKGDV(12), /* SRGR1=0f0c */ - .srgr2 = FSGM | FPER(31), /* SRGR2=101f */ - .pcr0 = FSXM | FSRM | CLKXM | CLKRM | FSXP | FSRP | CLKXP | CLKRP, - /* PCR0 =0f0f */ -}; - -static struct omap_alsa_codec_config sx1_alsa_config = { - .name = "SX1 EGold", - .mcbsp_regs_alsa = &mcbsp1_regs, -}; - -static struct platform_device sx1_mcbsp1_device = { - .name = "omap_alsa_mcbsp", - .id = 1, - .dev = { - .platform_data = &sx1_alsa_config, - }, -}; - /*----------- MTD -------------------------*/ static struct mtd_partition sx1_partitions[] = { @@ -394,7 +364,6 @@ static struct platform_device *sx1_devices[] __initdata = { &sx1_flash_device, &sx1_kp_device, &sx1_lcd_device, - &sx1_mcbsp1_device, &sx1_irda_device, }; /*-----------------------------------------*/ @@ -423,9 +392,9 @@ static void __init omap_sx1_init(void) /* turn on USB power */ /* sx1_setusbpower(1); cant do it here because i2c is not ready */ - omap_request_gpio(1); /* A_IRDA_OFF */ - omap_request_gpio(11); /* A_SWITCH */ - omap_request_gpio(15); /* A_USB_ON */ + gpio_request(1, "A_IRDA_OFF"); + gpio_request(11, "A_SWITCH"); + gpio_request(15, "A_USB_ON"); gpio_direction_output(1, 1); /*A_IRDA_OFF = 1 */ gpio_direction_output(11, 0); /*A_SWITCH = 0 */ gpio_direction_output(15, 0); /*A_USB_ON = 0 */ diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index c224f3c6423..a7653542a2b 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -22,7 +22,6 @@ #include <linux/reboot.h> #include <linux/serial_8250.h> #include <linux/serial_reg.h> -#include <linux/irq.h> #include <mach/hardware.h> #include <asm/mach-types.h> diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 4474da7bc88..ca7a0cc1707 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -17,6 +17,7 @@ #include <linux/io.h> #include <linux/platform_device.h> +#include <mach/irqs.h> #include <mach/dma.h> #include <mach/irqs.h> #include <mach/mux.h> diff --git a/arch/arm/mach-omap2/board-apollon.c b/arch/arm/mach-omap2/board-apollon.c index bf1e5d32c2a..0a7b24ba165 100644 --- a/arch/arm/mach-omap2/board-apollon.c +++ b/arch/arm/mach-omap2/board-apollon.c @@ -22,8 +22,6 @@ #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/onenand.h> -#include <linux/irq.h> -#include <linux/interrupt.h> #include <linux/delay.h> #include <linux/leds.h> #include <linux/err.h> @@ -282,65 +280,16 @@ static void __init apollon_led_init(void) { /* LED0 - AA10 */ omap_cfg_reg(AA10_242X_GPIO13); - omap_request_gpio(LED0_GPIO13); - omap_set_gpio_direction(LED0_GPIO13, 0); - omap_set_gpio_dataout(LED0_GPIO13, 0); + gpio_request(LED0_GPIO13, "LED0"); + gpio_direction_output(LED0_GPIO13, 0); /* LED1 - AA6 */ omap_cfg_reg(AA6_242X_GPIO14); - omap_request_gpio(LED1_GPIO14); - omap_set_gpio_direction(LED1_GPIO14, 0); - omap_set_gpio_dataout(LED1_GPIO14, 0); + gpio_request(LED1_GPIO14, "LED1"); + gpio_direction_output(LED1_GPIO14, 0); /* LED2 - AA4 */ omap_cfg_reg(AA4_242X_GPIO15); - omap_request_gpio(LED2_GPIO15); - omap_set_gpio_direction(LED2_GPIO15, 0); - omap_set_gpio_dataout(LED2_GPIO15, 0); -} - -static irqreturn_t apollon_sw_interrupt(int irq, void *ignored) -{ - static unsigned int led0, led1, led2; - - if (irq == OMAP_GPIO_IRQ(SW_ENTER_GPIO16)) - omap_set_gpio_dataout(LED0_GPIO13, led0 ^= 1); - else if (irq == OMAP_GPIO_IRQ(SW_UP_GPIO17)) - omap_set_gpio_dataout(LED1_GPIO14, led1 ^= 1); - else if (irq == OMAP_GPIO_IRQ(SW_DOWN_GPIO58)) - omap_set_gpio_dataout(LED2_GPIO15, led2 ^= 1); - - return IRQ_HANDLED; -} - -static void __init apollon_sw_init(void) -{ - /* Enter SW - Y11 */ - omap_cfg_reg(Y11_242X_GPIO16); - omap_request_gpio(SW_ENTER_GPIO16); - gpio_direction_input(SW_ENTER_GPIO16); - /* Up SW - AA12 */ - omap_cfg_reg(AA12_242X_GPIO17); - omap_request_gpio(SW_UP_GPIO17); - gpio_direction_input(SW_UP_GPIO17); - /* Down SW - AA8 */ - omap_cfg_reg(AA8_242X_GPIO58); - omap_request_gpio(SW_DOWN_GPIO58); - gpio_direction_input(SW_DOWN_GPIO58); - - set_irq_type(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), IRQ_TYPE_EDGE_RISING); - if (request_irq(OMAP_GPIO_IRQ(SW_ENTER_GPIO16), &apollon_sw_interrupt, - IRQF_SHARED, "enter sw", - &apollon_sw_interrupt)) - return; - set_irq_type(OMAP_GPIO_IRQ(SW_UP_GPIO17), IRQ_TYPE_EDGE_RISING); - if (request_irq(OMAP_GPIO_IRQ(SW_UP_GPIO17), &apollon_sw_interrupt, - IRQF_SHARED, "up sw", - &apollon_sw_interrupt)) - return; - set_irq_type(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), IRQ_TYPE_EDGE_RISING); - if (request_irq(OMAP_GPIO_IRQ(SW_DOWN_GPIO58), &apollon_sw_interrupt, - IRQF_SHARED, "down sw", - &apollon_sw_interrupt)) - return; + gpio_request(LED2_GPIO15, "LED2"); + gpio_direction_output(LED2_GPIO15, 0); } static void __init apollon_usb_init(void) @@ -357,7 +306,6 @@ static void __init omap_apollon_init(void) u32 v; apollon_led_init(); - apollon_sw_init(); apollon_flash_init(); apollon_usb_init(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index aa6972781e4..f6a13451d1f 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -88,7 +88,7 @@ static inline void __init ldp_init_smc911x(void) ldp_smc911x_resources[1].start = OMAP_GPIO_IRQ(eth_gpio); - if (omap_request_gpio(eth_gpio) < 0) { + if (gpio_request(eth_gpio, "smc911x irq") < 0) { printk(KERN_ERR "Failed to request GPIO%d for smc911x IRQ\n", eth_gpio); return; diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index 9e5ada01b5f..38c88fbe658 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -28,6 +28,8 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/nand.h> +#include <linux/i2c/twl4030.h> + #include <mach/hardware.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -120,6 +122,9 @@ static int beagle_twl_gpio_setup(struct device *dev, unsigned gpio, unsigned ngpio) { /* gpio + 0 is "mmc0_cd" (input/IRQ) */ + omap_cfg_reg(AH8_34XX_GPIO29); + mmc[0].gpio_cd = gpio + 0; + twl4030_mmc_init(mmc); /* REVISIT: need ehci-omap hooks for external VBUS * power switch and overcurrent detect @@ -304,10 +309,6 @@ static void __init omap3_beagle_init(void) omap_board_config_size = ARRAY_SIZE(omap3_beagle_config); omap_serial_init(); - omap_cfg_reg(AH8_34XX_GPIO29); - mmc[0].gpio_cd = gpio + 0; - twl4030_mmc_init(mmc); - omap_cfg_reg(J25_34XX_GPIO170); gpio_request(170, "DVI_nPD"); /* REVISIT leave DVI powered down until it's needed ... */ diff --git a/arch/arm/mach-omap2/mcbsp.c b/arch/arm/mach-omap2/mcbsp.c index acdc709901c..e20023c9d15 100644 --- a/arch/arm/mach-omap2/mcbsp.c +++ b/arch/arm/mach-omap2/mcbsp.c @@ -17,6 +17,7 @@ #include <linux/io.h> #include <linux/platform_device.h> +#include <mach/irqs.h> #include <mach/dma.h> #include <mach/irqs.h> #include <mach/mux.h> diff --git a/arch/arm/mm/copypage-v4mc.c b/arch/arm/mm/copypage-v4mc.c index bdb5fd983b1..1601698b980 100644 --- a/arch/arm/mm/copypage-v4mc.c +++ b/arch/arm/mm/copypage-v4mc.c @@ -68,7 +68,7 @@ mc_copy_user_page(void *from, void *to) : "r" (from), "r" (to), "I" (PAGE_SIZE / 64)); } -void v4_mc_copy_user_highpage(struct page *from, struct page *to, +void v4_mc_copy_user_highpage(struct page *to, struct page *from, unsigned long vaddr) { void *kto = kmap_atomic(to, KM_USER1); diff --git a/arch/arm/mm/ioremap.c b/arch/arm/mm/ioremap.c index 18373f73f2f..9f88dd3be60 100644 --- a/arch/arm/mm/ioremap.c +++ b/arch/arm/mm/ioremap.c @@ -138,7 +138,7 @@ void __check_kvm_seq(struct mm_struct *mm) */ static void unmap_area_sections(unsigned long virt, unsigned long size) { - unsigned long addr = virt, end = virt + (size & ~SZ_1M); + unsigned long addr = virt, end = virt + (size & ~(SZ_1M - 1)); pgd_t *pgd; flush_cache_vunmap(addr, end); @@ -337,10 +337,7 @@ void __iounmap(volatile void __iomem *io_addr) void *addr = (void *)(PAGE_MASK & (unsigned long)io_addr); #ifndef CONFIG_SMP struct vm_struct **p, *tmp; -#endif - unsigned int section_mapping = 0; -#ifndef CONFIG_SMP /* * If this is a section based mapping we need to handle it * specially as the VM subsystem does not know how to handle @@ -352,11 +349,8 @@ void __iounmap(volatile void __iomem *io_addr) for (p = &vmlist ; (tmp = *p) ; p = &tmp->next) { if ((tmp->flags & VM_IOREMAP) && (tmp->addr == addr)) { if (tmp->flags & VM_ARM_SECTION_MAPPING) { - *p = tmp->next; unmap_area_sections((unsigned long)tmp->addr, tmp->size); - kfree(tmp); - section_mapping = 1; } break; } @@ -364,7 +358,6 @@ void __iounmap(volatile void __iomem *io_addr) write_unlock(&vmlist_lock); #endif - if (!section_mapping) - vunmap(addr); + vunmap(addr); } EXPORT_SYMBOL(__iounmap); diff --git a/arch/arm/oprofile/op_model_mpcore.c b/arch/arm/oprofile/op_model_mpcore.c index 6d6bd589924..853d42bb868 100644 --- a/arch/arm/oprofile/op_model_mpcore.c +++ b/arch/arm/oprofile/op_model_mpcore.c @@ -263,7 +263,7 @@ static void em_route_irq(int irq, unsigned int cpu) const struct cpumask *mask = cpumask_of(cpu); spin_lock_irq(&desc->lock); - desc->affinity = *mask; + cpumask_copy(desc->affinity, mask); desc->chip->set_affinity(irq, mask); spin_unlock_irq(&desc->lock); } diff --git a/arch/arm/plat-mxc/include/mach/ipu.h b/arch/arm/plat-mxc/include/mach/ipu.h new file mode 100644 index 00000000000..a9221f1cc1a --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/ipu.h @@ -0,0 +1,181 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _IPU_H_ +#define _IPU_H_ + +#include <linux/types.h> +#include <linux/dmaengine.h> + +/* IPU DMA Controller channel definitions. */ +enum ipu_channel { + IDMAC_IC_0 = 0, /* IC (encoding task) to memory */ + IDMAC_IC_1 = 1, /* IC (viewfinder task) to memory */ + IDMAC_ADC_0 = 1, + IDMAC_IC_2 = 2, + IDMAC_ADC_1 = 2, + IDMAC_IC_3 = 3, + IDMAC_IC_4 = 4, + IDMAC_IC_5 = 5, + IDMAC_IC_6 = 6, + IDMAC_IC_7 = 7, /* IC (sensor data) to memory */ + IDMAC_IC_8 = 8, + IDMAC_IC_9 = 9, + IDMAC_IC_10 = 10, + IDMAC_IC_11 = 11, + IDMAC_IC_12 = 12, + IDMAC_IC_13 = 13, + IDMAC_SDC_0 = 14, /* Background synchronous display data */ + IDMAC_SDC_1 = 15, /* Foreground data (overlay) */ + IDMAC_SDC_2 = 16, + IDMAC_SDC_3 = 17, + IDMAC_ADC_2 = 18, + IDMAC_ADC_3 = 19, + IDMAC_ADC_4 = 20, + IDMAC_ADC_5 = 21, + IDMAC_ADC_6 = 22, + IDMAC_ADC_7 = 23, + IDMAC_PF_0 = 24, + IDMAC_PF_1 = 25, + IDMAC_PF_2 = 26, + IDMAC_PF_3 = 27, + IDMAC_PF_4 = 28, + IDMAC_PF_5 = 29, + IDMAC_PF_6 = 30, + IDMAC_PF_7 = 31, +}; + +/* Order significant! */ +enum ipu_channel_status { + IPU_CHANNEL_FREE, + IPU_CHANNEL_INITIALIZED, + IPU_CHANNEL_READY, + IPU_CHANNEL_ENABLED, +}; + +#define IPU_CHANNELS_NUM 32 + +enum pixel_fmt { + /* 1 byte */ + IPU_PIX_FMT_GENERIC, + IPU_PIX_FMT_RGB332, + IPU_PIX_FMT_YUV420P, + IPU_PIX_FMT_YUV422P, + IPU_PIX_FMT_YUV420P2, + IPU_PIX_FMT_YVU422P, + /* 2 bytes */ + IPU_PIX_FMT_RGB565, + IPU_PIX_FMT_RGB666, + IPU_PIX_FMT_BGR666, + IPU_PIX_FMT_YUYV, + IPU_PIX_FMT_UYVY, + /* 3 bytes */ + IPU_PIX_FMT_RGB24, + IPU_PIX_FMT_BGR24, + /* 4 bytes */ + IPU_PIX_FMT_GENERIC_32, + IPU_PIX_FMT_RGB32, + IPU_PIX_FMT_BGR32, + IPU_PIX_FMT_ABGR32, + IPU_PIX_FMT_BGRA32, + IPU_PIX_FMT_RGBA32, +}; + +enum ipu_color_space { + IPU_COLORSPACE_RGB, + IPU_COLORSPACE_YCBCR, + IPU_COLORSPACE_YUV +}; + +/* + * Enumeration of IPU rotation modes + */ +enum ipu_rotate_mode { + /* Note the enum values correspond to BAM value */ + IPU_ROTATE_NONE = 0, + IPU_ROTATE_VERT_FLIP = 1, + IPU_ROTATE_HORIZ_FLIP = 2, + IPU_ROTATE_180 = 3, + IPU_ROTATE_90_RIGHT = 4, + IPU_ROTATE_90_RIGHT_VFLIP = 5, + IPU_ROTATE_90_RIGHT_HFLIP = 6, + IPU_ROTATE_90_LEFT = 7, +}; + +struct ipu_platform_data { + unsigned int irq_base; +}; + +/* + * Enumeration of DI ports for ADC. + */ +enum display_port { + DISP0, + DISP1, + DISP2, + DISP3 +}; + +struct idmac_video_param { + unsigned short in_width; + unsigned short in_height; + uint32_t in_pixel_fmt; + unsigned short out_width; + unsigned short out_height; + uint32_t out_pixel_fmt; + unsigned short out_stride; + bool graphics_combine_en; + bool global_alpha_en; + bool key_color_en; + enum display_port disp; + unsigned short out_left; + unsigned short out_top; +}; + +/* + * Union of initialization parameters for a logical channel. So far only video + * parameters are used. + */ +union ipu_channel_param { + struct idmac_video_param video; +}; + +struct idmac_tx_desc { + struct dma_async_tx_descriptor txd; + struct scatterlist *sg; /* scatterlist for this */ + unsigned int sg_len; /* tx-descriptor. */ + struct list_head list; +}; + +struct idmac_channel { + struct dma_chan dma_chan; + dma_cookie_t completed; /* last completed cookie */ + union ipu_channel_param params; + enum ipu_channel link; /* input channel, linked to the output */ + enum ipu_channel_status status; + void *client; /* Only one client per channel */ + unsigned int n_tx_desc; + struct idmac_tx_desc *desc; /* allocated tx-descriptors */ + struct scatterlist *sg[2]; /* scatterlist elements in buffer-0 and -1 */ + struct list_head free_list; /* free tx-descriptors */ + struct list_head queue; /* queued tx-descriptors */ + spinlock_t lock; /* protects sg[0,1], queue */ + struct mutex chan_mutex; /* protects status, cookie, free_list */ + bool sec_chan_en; + int active_buffer; + unsigned int eof_irq; + char eof_name[16]; /* EOF IRQ name for request_irq() */ +}; + +#define to_tx_desc(tx) container_of(tx, struct idmac_tx_desc, txd) +#define to_idmac_chan(c) container_of(c, struct idmac_channel, dma_chan) + +#endif diff --git a/arch/arm/plat-mxc/include/mach/irqs.h b/arch/arm/plat-mxc/include/mach/irqs.h index e06d3cb0ee1..c02b8fc2d82 100644 --- a/arch/arm/plat-mxc/include/mach/irqs.h +++ b/arch/arm/plat-mxc/include/mach/irqs.h @@ -35,7 +35,15 @@ #define MXC_BOARD_IRQ_START (MXC_INTERNAL_IRQS + MXC_GPIO_IRQS) #define MXC_BOARD_IRQS 16 -#define NR_IRQS (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS) +#define MXC_IPU_IRQ_START (MXC_BOARD_IRQ_START + MXC_BOARD_IRQS) + +#ifdef CONFIG_MX3_IPU_IRQS +#define MX3_IPU_IRQS CONFIG_MX3_IPU_IRQS +#else +#define MX3_IPU_IRQS 0 +#endif + +#define NR_IRQS (MXC_IPU_IRQ_START + MX3_IPU_IRQS) extern void imx_irq_set_priority(unsigned char irq, unsigned char prio); diff --git a/arch/arm/plat-mxc/include/mach/mx3fb.h b/arch/arm/plat-mxc/include/mach/mx3fb.h new file mode 100644 index 00000000000..e391a76ca87 --- /dev/null +++ b/arch/arm/plat-mxc/include/mach/mx3fb.h @@ -0,0 +1,38 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef __ASM_ARCH_MX3FB_H__ +#define __ASM_ARCH_MX3FB_H__ + +#include <linux/device.h> +#include <linux/fb.h> + +/* Proprietary FB_SYNC_ flags */ +#define FB_SYNC_OE_ACT_HIGH 0x80000000 +#define FB_SYNC_CLK_INVERT 0x40000000 +#define FB_SYNC_DATA_INVERT 0x20000000 +#define FB_SYNC_CLK_IDLE_EN 0x10000000 +#define FB_SYNC_SHARP_MODE 0x08000000 +#define FB_SYNC_SWAP_RGB 0x04000000 +#define FB_SYNC_CLK_SEL_EN 0x02000000 + +/** + * struct mx3fb_platform_data - mx3fb platform data + * + * @dma_dev: pointer to the dma-device, used for dma-slave connection + * @mode: pointer to a platform-provided per mxc_register_fb() videomode + */ +struct mx3fb_platform_data { + struct device *dma_dev; + const char *name; + const struct fb_videomode *mode; + int num_modes; +}; + +#endif diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c index 692d2b495af..e77373c39f8 100644 --- a/arch/arm/plat-omap/dma.c +++ b/arch/arm/plat-omap/dma.c @@ -278,14 +278,11 @@ void omap_set_dma_transfer_params(int lch, int data_type, int elem_count, u32 val; val = dma_read(CCR(lch)); - val &= ~(3 << 19); - if (dma_trigger > 63) - val |= 1 << 20; - if (dma_trigger > 31) - val |= 1 << 19; - - val &= ~(0x1f); - val |= (dma_trigger & 0x1f); + + /* DMA_SYNCHRO_CONTROL_UPPER depends on the channel number */ + val &= ~((3 << 19) | 0x1f); + val |= (dma_trigger & ~0x1f) << 14; + val |= dma_trigger & 0x1f; if (sync_mode & OMAP_DMA_SYNC_FRAME) val |= 1 << 5; diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 07b6968a7d1..f856a90b264 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -1789,6 +1789,8 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) /* FIXME for at least omap2, show pullup/pulldown state */ irqstat = irq_desc[irq].status; +#if defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP24XX) || \ + defined(CONFIG_ARCH_OMAP34XX) if (is_in && ((bank->suspend_wakeup & mask) || irqstat & IRQ_TYPE_SENSE_MASK)) { char *trigger = NULL; @@ -1818,6 +1820,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) (bank->suspend_wakeup & mask) ? " wakeup" : ""); } +#endif seq_printf(s, "\n"); } diff --git a/arch/arm/plat-omap/include/mach/aic23.h b/arch/arm/plat-omap/include/mach/aic23.h deleted file mode 100644 index 5ccedac7752..00000000000 --- a/arch/arm/plat-omap/include/mach/aic23.h +++ /dev/null @@ -1,116 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/aic23.h - * - * Hardware definitions for TI TLV320AIC23 audio codec - * - * Copyright (C) 2002 RidgeRun, Inc. - * Author: Steve Johnson - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - */ - -#ifndef __ASM_ARCH_AIC23_H -#define __ASM_ARCH_AIC23_H - -// Codec TLV320AIC23 -#define LEFT_LINE_VOLUME_ADDR 0x00 -#define RIGHT_LINE_VOLUME_ADDR 0x01 -#define LEFT_CHANNEL_VOLUME_ADDR 0x02 -#define RIGHT_CHANNEL_VOLUME_ADDR 0x03 -#define ANALOG_AUDIO_CONTROL_ADDR 0x04 -#define DIGITAL_AUDIO_CONTROL_ADDR 0x05 -#define POWER_DOWN_CONTROL_ADDR 0x06 -#define DIGITAL_AUDIO_FORMAT_ADDR 0x07 -#define SAMPLE_RATE_CONTROL_ADDR 0x08 -#define DIGITAL_INTERFACE_ACT_ADDR 0x09 -#define RESET_CONTROL_ADDR 0x0F - -// Left (right) line input volume control register -#define LRS_ENABLED 0x0100 -#define LIM_MUTED 0x0080 -#define LIV_DEFAULT 0x0017 -#define LIV_MAX 0x001f -#define LIV_MIN 0x0000 - -// Left (right) channel headphone volume control register -#define LZC_ON 0x0080 -#define LHV_DEFAULT 0x0079 -#define LHV_MAX 0x007f -#define LHV_MIN 0x0000 - -// Analog audio path control register -#define STA_REG(x) ((x)<<6) -#define STE_ENABLED 0x0020 -#define DAC_SELECTED 0x0010 -#define BYPASS_ON 0x0008 -#define INSEL_MIC 0x0004 -#define MICM_MUTED 0x0002 -#define MICB_20DB 0x0001 - -// Digital audio path control register -#define DACM_MUTE 0x0008 -#define DEEMP_32K 0x0002 -#define DEEMP_44K 0x0004 -#define DEEMP_48K 0x0006 -#define ADCHP_ON 0x0001 - -// Power control down register -#define DEVICE_POWER_OFF 0x0080 -#define CLK_OFF 0x0040 -#define OSC_OFF 0x0020 -#define OUT_OFF 0x0010 -#define DAC_OFF 0x0008 -#define ADC_OFF 0x0004 -#define MIC_OFF 0x0002 -#define LINE_OFF 0x0001 - -// Digital audio interface register -#define MS_MASTER 0x0040 -#define LRSWAP_ON 0x0020 -#define LRP_ON 0x0010 -#define IWL_16 0x0000 -#define IWL_20 0x0004 -#define IWL_24 0x0008 -#define IWL_32 0x000C -#define FOR_I2S 0x0002 -#define FOR_DSP 0x0003 - -// Sample rate control register -#define CLKOUT_HALF 0x0080 -#define CLKIN_HALF 0x0040 -#define BOSR_384fs 0x0002 // BOSR_272fs when in USB mode -#define USB_CLK_ON 0x0001 -#define SR_MASK 0xf -#define CLKOUT_SHIFT 7 -#define CLKIN_SHIFT 6 -#define SR_SHIFT 2 -#define BOSR_SHIFT 1 - -// Digital interface register -#define ACT_ON 0x0001 - -#define TLV320AIC23ID1 (0x1a) // cs low -#define TLV320AIC23ID2 (0x1b) // cs high - -void aic23_power_up(void); -void aic23_power_down(void); - -#endif /* __ASM_ARCH_AIC23_H */ diff --git a/arch/arm/plat-omap/include/mach/board-h3.h b/arch/arm/plat-omap/include/mach/board-h3.h index 14909dc7858..1888326da7e 100644 --- a/arch/arm/plat-omap/include/mach/board-h3.h +++ b/arch/arm/plat-omap/include/mach/board-h3.h @@ -30,7 +30,9 @@ /* In OMAP1710 H3 the Ethernet is directly connected to CS1 */ #define OMAP1710_ETHR_START 0x04000300 +#define H3_TPS_GPIO_BASE (OMAP_MAX_GPIO_LINES + 16 /* MPUIO */) +# define H3_TPS_GPIO_MMC_PWR_EN (H3_TPS_GPIO_BASE + 4) + extern void h3_mmc_init(void); -extern void h3_mmc_slot_cover_handler(void *arg, int state); #endif /* __ASM_ARCH_OMAP_H3_H */ diff --git a/arch/arm/plat-omap/include/mach/gpio.h b/arch/arm/plat-omap/include/mach/gpio.h index 04e68e88f13..8d9dfe31438 100644 --- a/arch/arm/plat-omap/include/mach/gpio.h +++ b/arch/arm/plat-omap/include/mach/gpio.h @@ -87,16 +87,6 @@ extern void omap_set_gpio_debounce_time(int gpio, int enable); #include <linux/errno.h> #include <asm-generic/gpio.h> -static inline int omap_request_gpio(int gpio) -{ - return gpio_request(gpio, "FIXME"); -} - -static inline void omap_free_gpio(int gpio) -{ - gpio_free(gpio); -} - static inline int gpio_get_value(unsigned gpio) { return __gpio_get_value(gpio); diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index 6a0d1a0a24a..eef873db3d4 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -87,6 +87,10 @@ #define OMAP_MCBSP_REG_XCERG 0x3A #define OMAP_MCBSP_REG_XCERH 0x3C +/* Dummy defines, these are not available on omap1 */ +#define OMAP_MCBSP_REG_XCCR 0x00 +#define OMAP_MCBSP_REG_RCCR 0x00 + #define AUDIO_MCBSP_DATAWRITE (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DXR1) #define AUDIO_MCBSP_DATAREAD (OMAP1510_MCBSP1_BASE + OMAP_MCBSP_REG_DRR1) @@ -231,11 +235,16 @@ #define XPBBLK(value) ((value)<<7) /* Bits 7:8 */ /*********************** McBSP XCCR bit definitions *************************/ +#define EXTCLKGATE 0x8000 +#define PPCONNECT 0x4000 +#define DXENDLY(value) ((value)<<12) /* Bits 12:13 */ +#define XFULL_CYCLE 0x0800 #define DILB 0x0020 #define XDMAEN 0x0008 #define XDISABLE 0x0001 /********************** McBSP RCCR bit definitions *************************/ +#define RFULL_CYCLE 0x0800 #define RDMAEN 0x0008 #define RDISABLE 0x0001 @@ -267,6 +276,8 @@ struct omap_mcbsp_reg_cfg { u16 rcerh; u16 xcerg; u16 xcerh; + u16 xccr; + u16 rccr; }; typedef enum { diff --git a/arch/arm/plat-omap/mcbsp.c b/arch/arm/plat-omap/mcbsp.c index af33fc713e1..f2401a831f9 100644 --- a/arch/arm/plat-omap/mcbsp.c +++ b/arch/arm/plat-omap/mcbsp.c @@ -173,6 +173,10 @@ void omap_mcbsp_config(unsigned int id, const struct omap_mcbsp_reg_cfg *config) OMAP_MCBSP_WRITE(io_base, MCR2, config->mcr2); OMAP_MCBSP_WRITE(io_base, MCR1, config->mcr1); OMAP_MCBSP_WRITE(io_base, PCR0, config->pcr0); + if (cpu_is_omap2430() || cpu_is_omap34xx()) { + OMAP_MCBSP_WRITE(io_base, XCCR, config->xccr); + OMAP_MCBSP_WRITE(io_base, RCCR, config->rccr); + } } EXPORT_SYMBOL(omap_mcbsp_config); diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index add0485703b..e278de6862a 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -431,15 +431,6 @@ bad: /*-------------------------------------------------------------------------*/ -#if defined(CONFIG_USB_GADGET_OMAP) || \ - defined(CONFIG_USB_OHCI_HCD) || defined(CONFIG_USB_OHCI_HCD_MODULE) || \ - (defined(CONFIG_USB_OTG) && defined(CONFIG_ARCH_OMAP_OTG)) -static void usb_release(struct device *dev) -{ - /* normally not freed */ -} -#endif - #ifdef CONFIG_USB_GADGET_OMAP static struct resource udc_resources[] = { @@ -466,7 +457,6 @@ static struct platform_device udc_device = { .name = "omap_udc", .id = -1, .dev = { - .release = usb_release, .dma_mask = &udc_dmamask, .coherent_dma_mask = 0xffffffff, }, @@ -497,7 +487,6 @@ static struct platform_device ohci_device = { .name = "ohci", .id = -1, .dev = { - .release = usb_release, .dma_mask = &ohci_dmamask, .coherent_dma_mask = 0xffffffff, }, @@ -524,9 +513,6 @@ static struct resource otg_resources[] = { static struct platform_device otg_device = { .name = "omap_otg", .id = -1, - .dev = { - .release = usb_release, - }, .num_resources = ARRAY_SIZE(otg_resources), .resource = otg_resources, }; diff --git a/arch/avr32/configs/atngw100_defconfig b/arch/avr32/configs/atngw100_defconfig index 164e2814ae7..574aca97533 100644 --- a/arch/avr32/configs/atngw100_defconfig +++ b/arch/avr32/configs/atngw100_defconfig @@ -644,8 +644,8 @@ CONFIG_I2C_GPIO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_AT24=m -# CONFIG_SENSORS_EEPROM is not set +CONFIG_EEPROM_AT24=m +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -670,7 +670,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/avr32/configs/atngw100_evklcd100_defconfig b/arch/avr32/configs/atngw100_evklcd100_defconfig index b0572d21382..86a45b5c9d0 100644 --- a/arch/avr32/configs/atngw100_evklcd100_defconfig +++ b/arch/avr32/configs/atngw100_evklcd100_defconfig @@ -671,7 +671,7 @@ CONFIG_I2C_GPIO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -699,7 +699,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set CONFIG_HAVE_GPIO_LIB=y diff --git a/arch/avr32/configs/atngw100_evklcd101_defconfig b/arch/avr32/configs/atngw100_evklcd101_defconfig index c5b898d2107..a96b68ea5e8 100644 --- a/arch/avr32/configs/atngw100_evklcd101_defconfig +++ b/arch/avr32/configs/atngw100_evklcd101_defconfig @@ -671,7 +671,7 @@ CONFIG_I2C_GPIO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -699,7 +699,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set CONFIG_HAVE_GPIO_LIB=y diff --git a/arch/avr32/configs/atstk1002_defconfig b/arch/avr32/configs/atstk1002_defconfig index c9dc64832a1..0abe90adb1a 100644 --- a/arch/avr32/configs/atstk1002_defconfig +++ b/arch/avr32/configs/atstk1002_defconfig @@ -663,8 +663,8 @@ CONFIG_I2C_GPIO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_AT24=m -# CONFIG_SENSORS_EEPROM is not set +CONFIG_EEPROM_AT24=m +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -689,7 +689,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/avr32/configs/atstk1003_defconfig b/arch/avr32/configs/atstk1003_defconfig index 29ea1327b49..101972f40f0 100644 --- a/arch/avr32/configs/atstk1003_defconfig +++ b/arch/avr32/configs/atstk1003_defconfig @@ -611,8 +611,8 @@ CONFIG_I2C_GPIO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_AT24=m -# CONFIG_SENSORS_EEPROM is not set +CONFIG_EEPROM_AT24=m +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -637,7 +637,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/avr32/configs/atstk1004_defconfig b/arch/avr32/configs/atstk1004_defconfig index 69e6c0d08ce..518f7898df7 100644 --- a/arch/avr32/configs/atstk1004_defconfig +++ b/arch/avr32/configs/atstk1004_defconfig @@ -394,7 +394,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/avr32/configs/atstk1006_defconfig b/arch/avr32/configs/atstk1006_defconfig index 361c31c2af1..c1603c4860e 100644 --- a/arch/avr32/configs/atstk1006_defconfig +++ b/arch/avr32/configs/atstk1006_defconfig @@ -684,8 +684,8 @@ CONFIG_I2C_GPIO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -710,7 +710,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/avr32/configs/favr-32_defconfig b/arch/avr32/configs/favr-32_defconfig index e2bd9982e2a..4c3ac0643e4 100644 --- a/arch/avr32/configs/favr-32_defconfig +++ b/arch/avr32/configs/favr-32_defconfig @@ -633,8 +633,8 @@ CONFIG_I2C_GPIO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -659,7 +659,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/avr32/configs/hammerhead_defconfig b/arch/avr32/configs/hammerhead_defconfig index 0d3d2982c8f..3970fcc4d76 100644 --- a/arch/avr32/configs/hammerhead_defconfig +++ b/arch/avr32/configs/hammerhead_defconfig @@ -716,8 +716,8 @@ CONFIG_I2C_GPIO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -742,7 +742,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/avr32/configs/mimc200_defconfig b/arch/avr32/configs/mimc200_defconfig index 981e4f8b8ae..1a58ffbc752 100644 --- a/arch/avr32/configs/mimc200_defconfig +++ b/arch/avr32/configs/mimc200_defconfig @@ -565,8 +565,8 @@ CONFIG_I2C_GPIO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_AT24=y -# CONFIG_SENSORS_EEPROM is not set +CONFIG_EEPROM_AT24=y +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -592,7 +592,7 @@ CONFIG_SPI_ATMEL=y # # SPI Protocol Masters # -CONFIG_SPI_AT25=y +CONFIG_EEPROM_AT25=y # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_REQUIRE_GPIOLIB=y diff --git a/arch/blackfin/configs/BF518F-EZBRD_defconfig b/arch/blackfin/configs/BF518F-EZBRD_defconfig index e0b3f242b55..defb9785c65 100644 --- a/arch/blackfin/configs/BF518F-EZBRD_defconfig +++ b/arch/blackfin/configs/BF518F-EZBRD_defconfig @@ -746,9 +746,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/blackfin/configs/BF526-EZBRD_defconfig b/arch/blackfin/configs/BF526-EZBRD_defconfig index 69f66c35b2a..992424ff315 100644 --- a/arch/blackfin/configs/BF526-EZBRD_defconfig +++ b/arch/blackfin/configs/BF526-EZBRD_defconfig @@ -793,9 +793,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -820,7 +820,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF527-EZKIT_defconfig b/arch/blackfin/configs/BF527-EZKIT_defconfig index f92668af00b..21e3c1af55b 100644 --- a/arch/blackfin/configs/BF527-EZKIT_defconfig +++ b/arch/blackfin/configs/BF527-EZKIT_defconfig @@ -837,9 +837,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -864,7 +864,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF533-EZKIT_defconfig b/arch/blackfin/configs/BF533-EZKIT_defconfig index 92afd988449..0bdf20a1af6 100644 --- a/arch/blackfin/configs/BF533-EZKIT_defconfig +++ b/arch/blackfin/configs/BF533-EZKIT_defconfig @@ -719,7 +719,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF533-STAMP_defconfig b/arch/blackfin/configs/BF533-STAMP_defconfig index 49eabb41e9e..2f747d6e97e 100644 --- a/arch/blackfin/configs/BF533-STAMP_defconfig +++ b/arch/blackfin/configs/BF533-STAMP_defconfig @@ -743,9 +743,9 @@ CONFIG_I2C_HELPER_AUTO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -770,7 +770,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF537-STAMP_defconfig b/arch/blackfin/configs/BF537-STAMP_defconfig index 332142f7f9b..8b0a81294e6 100644 --- a/arch/blackfin/configs/BF537-STAMP_defconfig +++ b/arch/blackfin/configs/BF537-STAMP_defconfig @@ -794,9 +794,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set CONFIG_SENSORS_AD5252=m -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -821,7 +821,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF538-EZKIT_defconfig b/arch/blackfin/configs/BF538-EZKIT_defconfig index ed15934c67c..a1f766bf7d9 100644 --- a/arch/blackfin/configs/BF538-EZKIT_defconfig +++ b/arch/blackfin/configs/BF538-EZKIT_defconfig @@ -796,9 +796,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -823,7 +823,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF548-EZKIT_defconfig b/arch/blackfin/configs/BF548-EZKIT_defconfig index d4ed9ce1f62..cd2da6b7692 100644 --- a/arch/blackfin/configs/BF548-EZKIT_defconfig +++ b/arch/blackfin/configs/BF548-EZKIT_defconfig @@ -928,9 +928,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -955,7 +955,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BF561-EZKIT_defconfig b/arch/blackfin/configs/BF561-EZKIT_defconfig index 1ecb7a38c90..b398ca202db 100644 --- a/arch/blackfin/configs/BF561-EZKIT_defconfig +++ b/arch/blackfin/configs/BF561-EZKIT_defconfig @@ -756,7 +756,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/BlackStamp_defconfig b/arch/blackfin/configs/BlackStamp_defconfig index 9683b2e1309..3a20e281d23 100644 --- a/arch/blackfin/configs/BlackStamp_defconfig +++ b/arch/blackfin/configs/BlackStamp_defconfig @@ -691,7 +691,7 @@ CONFIG_I2C_GPIO=m # # CONFIG_DS1682 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set @@ -713,7 +713,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -CONFIG_SPI_AT25=y +CONFIG_EEPROM_AT25=y CONFIG_SPI_SPIDEV=m # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/blackfin/configs/CM-BF527_defconfig b/arch/blackfin/configs/CM-BF527_defconfig index a041e7eba77..95146948166 100644 --- a/arch/blackfin/configs/CM-BF527_defconfig +++ b/arch/blackfin/configs/CM-BF527_defconfig @@ -715,7 +715,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -742,7 +742,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/blackfin/configs/CM-BF548_defconfig b/arch/blackfin/configs/CM-BF548_defconfig index efd68bc78f3..efe9741b1f1 100644 --- a/arch/blackfin/configs/CM-BF548_defconfig +++ b/arch/blackfin/configs/CM-BF548_defconfig @@ -798,7 +798,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8575 is not set # CONFIG_SENSORS_PCA9543 is not set @@ -826,7 +826,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set diff --git a/arch/blackfin/configs/H8606_defconfig b/arch/blackfin/configs/H8606_defconfig index 5d3901d23fd..bd553da15db 100644 --- a/arch/blackfin/configs/H8606_defconfig +++ b/arch/blackfin/configs/H8606_defconfig @@ -750,7 +750,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -CONFIG_SPI_AT25=y +CONFIG_EEPROM_AT25=y CONFIG_SPI_SPIDEV=y # diff --git a/arch/blackfin/configs/IP0X_defconfig b/arch/blackfin/configs/IP0X_defconfig index e66f5daaa82..eae83b5de92 100644 --- a/arch/blackfin/configs/IP0X_defconfig +++ b/arch/blackfin/configs/IP0X_defconfig @@ -803,7 +803,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # diff --git a/arch/blackfin/configs/PNAV-10_defconfig b/arch/blackfin/configs/PNAV-10_defconfig index ce5dde9de9d..ad096702ac1 100644 --- a/arch/blackfin/configs/PNAV-10_defconfig +++ b/arch/blackfin/configs/PNAV-10_defconfig @@ -755,9 +755,9 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set +# CONFIG_EEPROM_AT24 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set CONFIG_SENSORS_PCF8574=m # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -781,7 +781,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/configs/SRV1_defconfig b/arch/blackfin/configs/SRV1_defconfig index 7c8250d6fa6..fa580affc9d 100644 --- a/arch/blackfin/configs/SRV1_defconfig +++ b/arch/blackfin/configs/SRV1_defconfig @@ -798,7 +798,7 @@ CONFIG_I2C_BLACKFIN_TWI_CLK_KHZ=100 # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_SENSORS_AD5252 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCF8575 is not set # CONFIG_SENSORS_PCA9543 is not set @@ -826,7 +826,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -CONFIG_SPI_AT25=m +CONFIG_EEPROM_AT25=m # CONFIG_SPI_SPIDEV is not set # diff --git a/arch/blackfin/configs/TCM-BF537_defconfig b/arch/blackfin/configs/TCM-BF537_defconfig index 9af522c7dad..97a1f1d20dc 100644 --- a/arch/blackfin/configs/TCM-BF537_defconfig +++ b/arch/blackfin/configs/TCM-BF537_defconfig @@ -533,7 +533,7 @@ CONFIG_SPI_BFIN=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y diff --git a/arch/blackfin/kernel/irqchip.c b/arch/blackfin/kernel/irqchip.c index ab8209cbbad..5780d6df154 100644 --- a/arch/blackfin/kernel/irqchip.c +++ b/arch/blackfin/kernel/irqchip.c @@ -69,6 +69,11 @@ static struct irq_desc bad_irq_desc = { #endif }; +#ifdef CONFIG_CPUMASK_OFFSTACK +/* We are not allocating a variable-sized bad_irq_desc.affinity */ +#error "Blackfin architecture does not support CONFIG_CPUMASK_OFFSTACK." +#endif + int show_interrupts(struct seq_file *p, void *v) { int i = *(loff_t *) v, j; diff --git a/arch/ia64/configs/bigsur_defconfig b/arch/ia64/configs/bigsur_defconfig index 6dd8655664f..ace41096b47 100644 --- a/arch/ia64/configs/bigsur_defconfig +++ b/arch/ia64/configs/bigsur_defconfig @@ -752,7 +752,7 @@ CONFIG_I2C_ALGOBIT=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/ia64/configs/zx1_defconfig b/arch/ia64/configs/zx1_defconfig index 0a06b1333c9..514f0635daf 100644 --- a/arch/ia64/configs/zx1_defconfig +++ b/arch/ia64/configs/zx1_defconfig @@ -841,7 +841,7 @@ CONFIG_I2C_ALGOPCF=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/ia64/include/asm/topology.h b/arch/ia64/include/asm/topology.h index 32f3af1641c..3193f4417e1 100644 --- a/arch/ia64/include/asm/topology.h +++ b/arch/ia64/include/asm/topology.h @@ -84,7 +84,7 @@ void build_cpu_to_node_map(void); .child = NULL, \ .groups = NULL, \ .min_interval = 8, \ - .max_interval = 8*(min(num_online_cpus(), 32)), \ + .max_interval = 8*(min(num_online_cpus(), 32U)), \ .busy_factor = 64, \ .imbalance_pct = 125, \ .cache_nice_tries = 2, \ diff --git a/arch/ia64/kernel/iosapic.c b/arch/ia64/kernel/iosapic.c index 5cfd3d91001..006ad366a45 100644 --- a/arch/ia64/kernel/iosapic.c +++ b/arch/ia64/kernel/iosapic.c @@ -880,7 +880,7 @@ iosapic_unregister_intr (unsigned int gsi) if (iosapic_intr_info[irq].count == 0) { #ifdef CONFIG_SMP /* Clear affinity */ - cpus_setall(idesc->affinity); + cpumask_setall(idesc->affinity); #endif /* Clear the interrupt information */ iosapic_intr_info[irq].dest = 0; diff --git a/arch/ia64/kernel/irq.c b/arch/ia64/kernel/irq.c index a58f64ca9f0..226233a6fa1 100644 --- a/arch/ia64/kernel/irq.c +++ b/arch/ia64/kernel/irq.c @@ -103,7 +103,7 @@ static char irq_redir [NR_IRQS]; // = { [0 ... NR_IRQS-1] = 1 }; void set_irq_affinity_info (unsigned int irq, int hwid, int redir) { if (irq < NR_IRQS) { - cpumask_copy(&irq_desc[irq].affinity, + cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu_logical_id(hwid))); irq_redir[irq] = (char) (redir & 0xff); } @@ -148,7 +148,7 @@ static void migrate_irqs(void) if (desc->status == IRQ_PER_CPU) continue; - if (cpumask_any_and(&irq_desc[irq].affinity, cpu_online_mask) + if (cpumask_any_and(irq_desc[irq].affinity, cpu_online_mask) >= nr_cpu_ids) { /* * Save it for phase 2 processing diff --git a/arch/ia64/kernel/irq_ia64.c b/arch/ia64/kernel/irq_ia64.c index 28d3d483db9..927ad027820 100644 --- a/arch/ia64/kernel/irq_ia64.c +++ b/arch/ia64/kernel/irq_ia64.c @@ -493,11 +493,13 @@ ia64_handle_irq (ia64_vector vector, struct pt_regs *regs) saved_tpr = ia64_getreg(_IA64_REG_CR_TPR); ia64_srlz_d(); while (vector != IA64_SPURIOUS_INT_VECTOR) { + struct irq_desc *desc = irq_to_desc(vector); + if (unlikely(IS_LOCAL_TLB_FLUSH(vector))) { smp_local_flush_tlb(); - kstat_this_cpu.irqs[vector]++; + kstat_incr_irqs_this_cpu(vector, desc); } else if (unlikely(IS_RESCHEDULE(vector))) - kstat_this_cpu.irqs[vector]++; + kstat_incr_irqs_this_cpu(vector, desc); else { int irq = local_vector_to_irq(vector); @@ -551,11 +553,13 @@ void ia64_process_pending_intr(void) * Perform normal interrupt style processing */ while (vector != IA64_SPURIOUS_INT_VECTOR) { + struct irq_desc *desc = irq_to_desc(vector); + if (unlikely(IS_LOCAL_TLB_FLUSH(vector))) { smp_local_flush_tlb(); - kstat_this_cpu.irqs[vector]++; + kstat_incr_irqs_this_cpu(vector, desc); } else if (unlikely(IS_RESCHEDULE(vector))) - kstat_this_cpu.irqs[vector]++; + kstat_incr_irqs_this_cpu(vector, desc); else { struct pt_regs *old_regs = set_irq_regs(NULL); int irq = local_vector_to_irq(vector); diff --git a/arch/ia64/kernel/msi_ia64.c b/arch/ia64/kernel/msi_ia64.c index 89033933903..dcb6b7c51ea 100644 --- a/arch/ia64/kernel/msi_ia64.c +++ b/arch/ia64/kernel/msi_ia64.c @@ -75,7 +75,7 @@ static void ia64_set_msi_irq_affinity(unsigned int irq, msg.data = data; write_msi_msg(irq, &msg); - irq_desc[irq].affinity = cpumask_of_cpu(cpu); + cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu)); } #endif /* CONFIG_SMP */ @@ -187,7 +187,7 @@ static void dmar_msi_set_affinity(unsigned int irq, const struct cpumask *mask) msg.address_lo |= MSI_ADDR_DESTID_CPU(cpu_physical_id(cpu)); dmar_msi_write(irq, &msg); - irq_desc[irq].affinity = *mask; + cpumask_copy(irq_desc[irq].affinity, mask); } #endif /* CONFIG_SMP */ diff --git a/arch/ia64/kernel/vmlinux.lds.S b/arch/ia64/kernel/vmlinux.lds.S index 10a7d47e851..f45e4e508ec 100644 --- a/arch/ia64/kernel/vmlinux.lds.S +++ b/arch/ia64/kernel/vmlinux.lds.S @@ -219,6 +219,7 @@ SECTIONS .data.percpu PERCPU_ADDR : AT(__phys_per_cpu_start - LOAD_OFFSET) { __per_cpu_start = .; + *(.data.percpu.page_aligned) *(.data.percpu) *(.data.percpu.shared_aligned) __per_cpu_end = .; diff --git a/arch/ia64/sn/kernel/msi_sn.c b/arch/ia64/sn/kernel/msi_sn.c index ca553b0429c..81e428943d7 100644 --- a/arch/ia64/sn/kernel/msi_sn.c +++ b/arch/ia64/sn/kernel/msi_sn.c @@ -205,7 +205,7 @@ static void sn_set_msi_irq_affinity(unsigned int irq, msg.address_lo = (u32)(bus_addr & 0x00000000ffffffff); write_msi_msg(irq, &msg); - irq_desc[irq].affinity = *cpu_mask; + cpumask_copy(irq_desc[irq].affinity, cpu_mask); } #endif /* CONFIG_SMP */ diff --git a/arch/m32r/configs/m32104ut_defconfig b/arch/m32r/configs/m32104ut_defconfig index 9b5af6cd2e0..6f54b00b383 100644 --- a/arch/m32r/configs/m32104ut_defconfig +++ b/arch/m32r/configs/m32104ut_defconfig @@ -621,7 +621,7 @@ CONFIG_I2C_ELEKTOR=m # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/include/asm-m68k/Kbuild b/arch/m68k/include/asm/Kbuild index 1a922fad76f..1a922fad76f 100644 --- a/include/asm-m68k/Kbuild +++ b/arch/m68k/include/asm/Kbuild diff --git a/arch/m68knommu/include/asm/MC68328.h b/arch/m68k/include/asm/MC68328.h index a337e56d09b..a337e56d09b 100644 --- a/arch/m68knommu/include/asm/MC68328.h +++ b/arch/m68k/include/asm/MC68328.h diff --git a/arch/m68knommu/include/asm/MC68332.h b/arch/m68k/include/asm/MC68332.h index 6bb8f02685a..6bb8f02685a 100644 --- a/arch/m68knommu/include/asm/MC68332.h +++ b/arch/m68k/include/asm/MC68332.h diff --git a/arch/m68knommu/include/asm/MC68EZ328.h b/arch/m68k/include/asm/MC68EZ328.h index 69b7f9139e5..69b7f9139e5 100644 --- a/arch/m68knommu/include/asm/MC68EZ328.h +++ b/arch/m68k/include/asm/MC68EZ328.h diff --git a/arch/m68knommu/include/asm/MC68VZ328.h b/arch/m68k/include/asm/MC68VZ328.h index 2b9bf626a0a..2b9bf626a0a 100644 --- a/arch/m68knommu/include/asm/MC68VZ328.h +++ b/arch/m68k/include/asm/MC68VZ328.h diff --git a/include/asm-m68k/a.out-core.h b/arch/m68k/include/asm/a.out-core.h index f6bfc1d63ff..f6bfc1d63ff 100644 --- a/include/asm-m68k/a.out-core.h +++ b/arch/m68k/include/asm/a.out-core.h diff --git a/include/asm-m68k/a.out.h b/arch/m68k/include/asm/a.out.h index 3885fe43432..3885fe43432 100644 --- a/include/asm-m68k/a.out.h +++ b/arch/m68k/include/asm/a.out.h diff --git a/include/asm-m68k/adb_iop.h b/arch/m68k/include/asm/adb_iop.h index 8a48e56f2d6..8a48e56f2d6 100644 --- a/include/asm-m68k/adb_iop.h +++ b/arch/m68k/include/asm/adb_iop.h diff --git a/include/asm-m68k/amigahw.h b/arch/m68k/include/asm/amigahw.h index 5ca5dd951a4..5ca5dd951a4 100644 --- a/include/asm-m68k/amigahw.h +++ b/arch/m68k/include/asm/amigahw.h diff --git a/include/asm-m68k/amigaints.h b/arch/m68k/include/asm/amigaints.h index b1bcdb835ab..b1bcdb835ab 100644 --- a/include/asm-m68k/amigaints.h +++ b/arch/m68k/include/asm/amigaints.h diff --git a/include/asm-m68k/amigayle.h b/arch/m68k/include/asm/amigayle.h index bb5a6aa329f..bb5a6aa329f 100644 --- a/include/asm-m68k/amigayle.h +++ b/arch/m68k/include/asm/amigayle.h diff --git a/include/asm-m68k/amipcmcia.h b/arch/m68k/include/asm/amipcmcia.h index 6f1ec1887d8..6f1ec1887d8 100644 --- a/include/asm-m68k/amipcmcia.h +++ b/arch/m68k/include/asm/amipcmcia.h diff --git a/arch/m68knommu/include/asm/anchor.h b/arch/m68k/include/asm/anchor.h index 871c0d5cfc3..871c0d5cfc3 100644 --- a/arch/m68knommu/include/asm/anchor.h +++ b/arch/m68k/include/asm/anchor.h diff --git a/include/asm-m68k/apollodma.h b/arch/m68k/include/asm/apollodma.h index 954adc851ad..954adc851ad 100644 --- a/include/asm-m68k/apollodma.h +++ b/arch/m68k/include/asm/apollodma.h diff --git a/include/asm-m68k/apollohw.h b/arch/m68k/include/asm/apollohw.h index a1373b9aa28..a1373b9aa28 100644 --- a/include/asm-m68k/apollohw.h +++ b/arch/m68k/include/asm/apollohw.h diff --git a/include/asm-m68k/atafd.h b/arch/m68k/include/asm/atafd.h index 8456889ee7d..8456889ee7d 100644 --- a/include/asm-m68k/atafd.h +++ b/arch/m68k/include/asm/atafd.h diff --git a/include/asm-m68k/atafdreg.h b/arch/m68k/include/asm/atafdreg.h index bbf80949fd9..bbf80949fd9 100644 --- a/include/asm-m68k/atafdreg.h +++ b/arch/m68k/include/asm/atafdreg.h diff --git a/include/asm-m68k/atari_joystick.h b/arch/m68k/include/asm/atari_joystick.h index 93be7da9f2c..93be7da9f2c 100644 --- a/include/asm-m68k/atari_joystick.h +++ b/arch/m68k/include/asm/atari_joystick.h diff --git a/include/asm-m68k/atari_stdma.h b/arch/m68k/include/asm/atari_stdma.h index 8e389b7fa70..8e389b7fa70 100644 --- a/include/asm-m68k/atari_stdma.h +++ b/arch/m68k/include/asm/atari_stdma.h diff --git a/include/asm-m68k/atari_stram.h b/arch/m68k/include/asm/atari_stram.h index 7546d13963b..7546d13963b 100644 --- a/include/asm-m68k/atari_stram.h +++ b/arch/m68k/include/asm/atari_stram.h diff --git a/include/asm-m68k/atarihw.h b/arch/m68k/include/asm/atarihw.h index 1412b4ab202..1412b4ab202 100644 --- a/include/asm-m68k/atarihw.h +++ b/arch/m68k/include/asm/atarihw.h diff --git a/include/asm-m68k/atariints.h b/arch/m68k/include/asm/atariints.h index 5748e99f4e2..5748e99f4e2 100644 --- a/include/asm-m68k/atariints.h +++ b/arch/m68k/include/asm/atariints.h diff --git a/include/asm-m68k/atarikb.h b/arch/m68k/include/asm/atarikb.h index 546e7da5804..546e7da5804 100644 --- a/include/asm-m68k/atarikb.h +++ b/arch/m68k/include/asm/atarikb.h diff --git a/arch/m68k/include/asm/atomic.h b/arch/m68k/include/asm/atomic.h new file mode 100644 index 00000000000..8d29145ebb2 --- /dev/null +++ b/arch/m68k/include/asm/atomic.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "atomic_no.h" +#else +#include "atomic_mm.h" +#endif diff --git a/include/asm-m68k/atomic.h b/arch/m68k/include/asm/atomic_mm.h index eb0ab9d4ee7..eb0ab9d4ee7 100644 --- a/include/asm-m68k/atomic.h +++ b/arch/m68k/include/asm/atomic_mm.h diff --git a/arch/m68knommu/include/asm/atomic.h b/arch/m68k/include/asm/atomic_no.h index 6bb674855a3..6bb674855a3 100644 --- a/arch/m68knommu/include/asm/atomic.h +++ b/arch/m68k/include/asm/atomic_no.h diff --git a/arch/m68knommu/include/asm/auxvec.h b/arch/m68k/include/asm/auxvec.h index 844d6d52204..844d6d52204 100644 --- a/arch/m68knommu/include/asm/auxvec.h +++ b/arch/m68k/include/asm/auxvec.h diff --git a/arch/m68k/include/asm/bitops.h b/arch/m68k/include/asm/bitops.h new file mode 100644 index 00000000000..ce163abddab --- /dev/null +++ b/arch/m68k/include/asm/bitops.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "bitops_no.h" +#else +#include "bitops_mm.h" +#endif diff --git a/include/asm-m68k/bitops.h b/arch/m68k/include/asm/bitops_mm.h index 9bde784e7ba..9bde784e7ba 100644 --- a/include/asm-m68k/bitops.h +++ b/arch/m68k/include/asm/bitops_mm.h diff --git a/arch/m68knommu/include/asm/bitops.h b/arch/m68k/include/asm/bitops_no.h index 9d3cbe5fad1..9d3cbe5fad1 100644 --- a/arch/m68knommu/include/asm/bitops.h +++ b/arch/m68k/include/asm/bitops_no.h diff --git a/include/asm-m68k/blinken.h b/arch/m68k/include/asm/blinken.h index 1a749cf7b06..1a749cf7b06 100644 --- a/include/asm-m68k/blinken.h +++ b/arch/m68k/include/asm/blinken.h diff --git a/arch/m68k/include/asm/bootinfo.h b/arch/m68k/include/asm/bootinfo.h new file mode 100644 index 00000000000..fedf3e32612 --- /dev/null +++ b/arch/m68k/include/asm/bootinfo.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "bootinfo_no.h" +#else +#include "bootinfo_mm.h" +#endif diff --git a/include/asm-m68k/bootinfo.h b/arch/m68k/include/asm/bootinfo_mm.h index fb8a06b9ab6..fb8a06b9ab6 100644 --- a/include/asm-m68k/bootinfo.h +++ b/arch/m68k/include/asm/bootinfo_mm.h diff --git a/arch/m68knommu/include/asm/bootinfo.h b/arch/m68k/include/asm/bootinfo_no.h index c12e526f518..c12e526f518 100644 --- a/arch/m68knommu/include/asm/bootinfo.h +++ b/arch/m68k/include/asm/bootinfo_no.h diff --git a/arch/m68knommu/include/asm/bootstd.h b/arch/m68k/include/asm/bootstd.h index bdc1a4ac4fe..bdc1a4ac4fe 100644 --- a/arch/m68knommu/include/asm/bootstd.h +++ b/arch/m68k/include/asm/bootstd.h diff --git a/arch/m68k/include/asm/bug.h b/arch/m68k/include/asm/bug.h new file mode 100644 index 00000000000..997e0944ebc --- /dev/null +++ b/arch/m68k/include/asm/bug.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "bug_no.h" +#else +#include "bug_mm.h" +#endif diff --git a/include/asm-m68k/bug.h b/arch/m68k/include/asm/bug_mm.h index e5b528deb8a..e5b528deb8a 100644 --- a/include/asm-m68k/bug.h +++ b/arch/m68k/include/asm/bug_mm.h diff --git a/arch/m68knommu/include/asm/bug.h b/arch/m68k/include/asm/bug_no.h index 70e7dc0af21..70e7dc0af21 100644 --- a/arch/m68knommu/include/asm/bug.h +++ b/arch/m68k/include/asm/bug_no.h diff --git a/arch/m68k/include/asm/bugs.h b/arch/m68k/include/asm/bugs.h new file mode 100644 index 00000000000..01f047d784e --- /dev/null +++ b/arch/m68k/include/asm/bugs.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "bugs_no.h" +#else +#include "bugs_mm.h" +#endif diff --git a/include/asm-m68k/bugs.h b/arch/m68k/include/asm/bugs_mm.h index d0193559241..d0193559241 100644 --- a/include/asm-m68k/bugs.h +++ b/arch/m68k/include/asm/bugs_mm.h diff --git a/arch/m68knommu/include/asm/bugs.h b/arch/m68k/include/asm/bugs_no.h index 5f382dac3a6..5f382dac3a6 100644 --- a/arch/m68knommu/include/asm/bugs.h +++ b/arch/m68k/include/asm/bugs_no.h diff --git a/include/asm-m68k/bvme6000hw.h b/arch/m68k/include/asm/bvme6000hw.h index f40d2f8510e..f40d2f8510e 100644 --- a/include/asm-m68k/bvme6000hw.h +++ b/arch/m68k/include/asm/bvme6000hw.h diff --git a/include/asm-m68k/byteorder.h b/arch/m68k/include/asm/byteorder.h index 31b260a8880..31b260a8880 100644 --- a/include/asm-m68k/byteorder.h +++ b/arch/m68k/include/asm/byteorder.h diff --git a/arch/m68k/include/asm/cache.h b/arch/m68k/include/asm/cache.h new file mode 100644 index 00000000000..599c29bc8f4 --- /dev/null +++ b/arch/m68k/include/asm/cache.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "cache_no.h" +#else +#include "cache_mm.h" +#endif diff --git a/include/asm-m68k/cache.h b/arch/m68k/include/asm/cache_mm.h index fed3fd30de7..fed3fd30de7 100644 --- a/include/asm-m68k/cache.h +++ b/arch/m68k/include/asm/cache_mm.h diff --git a/arch/m68knommu/include/asm/cache.h b/arch/m68k/include/asm/cache_no.h index 24e9eace5f8..24e9eace5f8 100644 --- a/arch/m68knommu/include/asm/cache.h +++ b/arch/m68k/include/asm/cache_no.h diff --git a/include/asm-m68k/cachectl.h b/arch/m68k/include/asm/cachectl.h index 525978e959e..525978e959e 100644 --- a/include/asm-m68k/cachectl.h +++ b/arch/m68k/include/asm/cachectl.h diff --git a/arch/m68k/include/asm/cacheflush.h b/arch/m68k/include/asm/cacheflush.h new file mode 100644 index 00000000000..a70d7319630 --- /dev/null +++ b/arch/m68k/include/asm/cacheflush.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "cacheflush_no.h" +#else +#include "cacheflush_mm.h" +#endif diff --git a/include/asm-m68k/cacheflush.h b/arch/m68k/include/asm/cacheflush_mm.h index 16bf375fdbe..16bf375fdbe 100644 --- a/include/asm-m68k/cacheflush.h +++ b/arch/m68k/include/asm/cacheflush_mm.h diff --git a/arch/m68knommu/include/asm/cacheflush.h b/arch/m68k/include/asm/cacheflush_no.h index 87e5dc0413b..c65f00a9455 100644 --- a/arch/m68knommu/include/asm/cacheflush.h +++ b/arch/m68k/include/asm/cacheflush_no.h @@ -51,13 +51,20 @@ static inline void __flush_cache_all(void) "movec %%d0,%%CACR\n\t" : : : "d0", "a0" ); #endif /* CONFIG_M5407 */ -#if defined(CONFIG_M527x) || defined(CONFIG_M528x) +#if defined(CONFIG_M523x) || defined(CONFIG_M527x) + __asm__ __volatile__ ( + "movel #0x81400100, %%d0\n\t" + "movec %%d0, %%CACR\n\t" + "nop\n\t" + : : : "d0" ); +#endif /* CONFIG_M523x || CONFIG_M527x */ +#if defined(CONFIG_M528x) __asm__ __volatile__ ( "movel #0x81000200, %%d0\n\t" "movec %%d0, %%CACR\n\t" "nop\n\t" : : : "d0" ); -#endif /* CONFIG_M527x || CONFIG_M528x */ +#endif /* CONFIG_M528x */ #if defined(CONFIG_M5206) || defined(CONFIG_M5206e) || defined(CONFIG_M5272) __asm__ __volatile__ ( "movel #0x81000100, %%d0\n\t" diff --git a/arch/m68k/include/asm/checksum.h b/arch/m68k/include/asm/checksum.h new file mode 100644 index 00000000000..1cf54476745 --- /dev/null +++ b/arch/m68k/include/asm/checksum.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "checksum_no.h" +#else +#include "checksum_mm.h" +#endif diff --git a/include/asm-m68k/checksum.h b/arch/m68k/include/asm/checksum_mm.h index 494f9aec37e..494f9aec37e 100644 --- a/include/asm-m68k/checksum.h +++ b/arch/m68k/include/asm/checksum_mm.h diff --git a/arch/m68knommu/include/asm/checksum.h b/arch/m68k/include/asm/checksum_no.h index 81883482ffb..81883482ffb 100644 --- a/arch/m68knommu/include/asm/checksum.h +++ b/arch/m68k/include/asm/checksum_no.h diff --git a/arch/m68knommu/include/asm/coldfire.h b/arch/m68k/include/asm/coldfire.h index 83a9fa4e618..83a9fa4e618 100644 --- a/arch/m68knommu/include/asm/coldfire.h +++ b/arch/m68k/include/asm/coldfire.h diff --git a/arch/m68knommu/include/asm/commproc.h b/arch/m68k/include/asm/commproc.h index edf5eb6c08d..edf5eb6c08d 100644 --- a/arch/m68knommu/include/asm/commproc.h +++ b/arch/m68k/include/asm/commproc.h diff --git a/include/asm-m68k/contregs.h b/arch/m68k/include/asm/contregs.h index d1ea750bddf..d1ea750bddf 100644 --- a/include/asm-m68k/contregs.h +++ b/arch/m68k/include/asm/contregs.h diff --git a/include/asm-m68k/cputime.h b/arch/m68k/include/asm/cputime.h index c79c5e89230..c79c5e89230 100644 --- a/include/asm-m68k/cputime.h +++ b/arch/m68k/include/asm/cputime.h diff --git a/arch/m68k/include/asm/current.h b/arch/m68k/include/asm/current.h new file mode 100644 index 00000000000..51b056dfaed --- /dev/null +++ b/arch/m68k/include/asm/current.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "current_no.h" +#else +#include "current_mm.h" +#endif diff --git a/include/asm-m68k/current.h b/arch/m68k/include/asm/current_mm.h index 8de8f8ceda6..8de8f8ceda6 100644 --- a/include/asm-m68k/current.h +++ b/arch/m68k/include/asm/current_mm.h diff --git a/arch/m68knommu/include/asm/current.h b/arch/m68k/include/asm/current_no.h index 53ee0f9f7ce..53ee0f9f7ce 100644 --- a/arch/m68knommu/include/asm/current.h +++ b/arch/m68k/include/asm/current_no.h diff --git a/arch/m68knommu/include/asm/dbg.h b/arch/m68k/include/asm/dbg.h index 27af3270f67..27af3270f67 100644 --- a/arch/m68knommu/include/asm/dbg.h +++ b/arch/m68k/include/asm/dbg.h diff --git a/arch/m68k/include/asm/delay.h b/arch/m68k/include/asm/delay.h new file mode 100644 index 00000000000..d2598e3dd7b --- /dev/null +++ b/arch/m68k/include/asm/delay.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "delay_no.h" +#else +#include "delay_mm.h" +#endif diff --git a/include/asm-m68k/delay.h b/arch/m68k/include/asm/delay_mm.h index 5ed92851bc6..5ed92851bc6 100644 --- a/include/asm-m68k/delay.h +++ b/arch/m68k/include/asm/delay_mm.h diff --git a/arch/m68knommu/include/asm/delay.h b/arch/m68k/include/asm/delay_no.h index 55cbd6294ab..55cbd6294ab 100644 --- a/arch/m68knommu/include/asm/delay.h +++ b/arch/m68k/include/asm/delay_no.h diff --git a/arch/m68knommu/include/asm/device.h b/arch/m68k/include/asm/device.h index d8f9872b0e2..d8f9872b0e2 100644 --- a/arch/m68knommu/include/asm/device.h +++ b/arch/m68k/include/asm/device.h diff --git a/arch/m68k/include/asm/div64.h b/arch/m68k/include/asm/div64.h new file mode 100644 index 00000000000..d211d9f5427 --- /dev/null +++ b/arch/m68k/include/asm/div64.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "div64_no.h" +#else +#include "div64_mm.h" +#endif diff --git a/include/asm-m68k/div64.h b/arch/m68k/include/asm/div64_mm.h index 8243c931b5c..8243c931b5c 100644 --- a/include/asm-m68k/div64.h +++ b/arch/m68k/include/asm/div64_mm.h diff --git a/arch/m68knommu/include/asm/div64.h b/arch/m68k/include/asm/div64_no.h index 6cd978cefb2..6cd978cefb2 100644 --- a/arch/m68knommu/include/asm/div64.h +++ b/arch/m68k/include/asm/div64_no.h diff --git a/arch/m68k/include/asm/dma-mapping.h b/arch/m68k/include/asm/dma-mapping.h new file mode 100644 index 00000000000..f4a4c7638f8 --- /dev/null +++ b/arch/m68k/include/asm/dma-mapping.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "dma-mapping_no.h" +#else +#include "dma-mapping_mm.h" +#endif diff --git a/include/asm-m68k/dma-mapping.h b/arch/m68k/include/asm/dma-mapping_mm.h index 26f505488c1..26f505488c1 100644 --- a/include/asm-m68k/dma-mapping.h +++ b/arch/m68k/include/asm/dma-mapping_mm.h diff --git a/arch/m68knommu/include/asm/dma-mapping.h b/arch/m68k/include/asm/dma-mapping_no.h index 6aeab18e58b..1748f2bca94 100644 --- a/arch/m68knommu/include/asm/dma-mapping.h +++ b/arch/m68k/include/asm/dma-mapping_no.h @@ -1,10 +1,6 @@ #ifndef _M68KNOMMU_DMA_MAPPING_H #define _M68KNOMMU_DMA_MAPPING_H -#ifdef CONFIG_PCI -#include <asm-generic/dma-mapping.h> -#else #include <asm-generic/dma-mapping-broken.h> -#endif #endif /* _M68KNOMMU_DMA_MAPPING_H */ diff --git a/arch/m68k/include/asm/dma.h b/arch/m68k/include/asm/dma.h new file mode 100644 index 00000000000..b82e660cf1c --- /dev/null +++ b/arch/m68k/include/asm/dma.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "dma_no.h" +#else +#include "dma_mm.h" +#endif diff --git a/include/asm-m68k/dma.h b/arch/m68k/include/asm/dma_mm.h index 4240fbc946f..4240fbc946f 100644 --- a/include/asm-m68k/dma.h +++ b/arch/m68k/include/asm/dma_mm.h diff --git a/arch/m68knommu/include/asm/dma.h b/arch/m68k/include/asm/dma_no.h index 939a0205621..939a0205621 100644 --- a/arch/m68knommu/include/asm/dma.h +++ b/arch/m68k/include/asm/dma_no.h diff --git a/include/asm-m68k/dsp56k.h b/arch/m68k/include/asm/dsp56k.h index 2d8c0c9f794..2d8c0c9f794 100644 --- a/include/asm-m68k/dsp56k.h +++ b/arch/m68k/include/asm/dsp56k.h diff --git a/include/asm-m68k/dvma.h b/arch/m68k/include/asm/dvma.h index 890bbf7e775..890bbf7e775 100644 --- a/include/asm-m68k/dvma.h +++ b/arch/m68k/include/asm/dvma.h diff --git a/arch/m68k/include/asm/elf.h b/arch/m68k/include/asm/elf.h new file mode 100644 index 00000000000..04ce488bc63 --- /dev/null +++ b/arch/m68k/include/asm/elf.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "elf_no.h" +#else +#include "elf_mm.h" +#endif diff --git a/include/asm-m68k/elf.h b/arch/m68k/include/asm/elf_mm.h index 0b0f49eb876..0b0f49eb876 100644 --- a/include/asm-m68k/elf.h +++ b/arch/m68k/include/asm/elf_mm.h diff --git a/arch/m68knommu/include/asm/elf.h b/arch/m68k/include/asm/elf_no.h index b8046837f38..b8046837f38 100644 --- a/arch/m68knommu/include/asm/elf.h +++ b/arch/m68k/include/asm/elf_no.h diff --git a/arch/m68knommu/include/asm/elia.h b/arch/m68k/include/asm/elia.h index e037d4e2de3..e037d4e2de3 100644 --- a/arch/m68knommu/include/asm/elia.h +++ b/arch/m68k/include/asm/elia.h diff --git a/arch/m68knommu/include/asm/emergency-restart.h b/arch/m68k/include/asm/emergency-restart.h index 108d8c48e42..108d8c48e42 100644 --- a/arch/m68knommu/include/asm/emergency-restart.h +++ b/arch/m68k/include/asm/emergency-restart.h diff --git a/arch/m68k/include/asm/entry.h b/arch/m68k/include/asm/entry.h new file mode 100644 index 00000000000..876eec6f2b5 --- /dev/null +++ b/arch/m68k/include/asm/entry.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "entry_no.h" +#else +#include "entry_mm.h" +#endif diff --git a/include/asm-m68k/entry.h b/arch/m68k/include/asm/entry_mm.h index 5202f5a5b42..5202f5a5b42 100644 --- a/include/asm-m68k/entry.h +++ b/arch/m68k/include/asm/entry_mm.h diff --git a/arch/m68knommu/include/asm/entry.h b/arch/m68k/include/asm/entry_no.h index c2553d26273..c2553d26273 100644 --- a/arch/m68knommu/include/asm/entry.h +++ b/arch/m68k/include/asm/entry_no.h diff --git a/include/asm-m68k/errno.h b/arch/m68k/include/asm/errno.h index 0d4e188d6ef..0d4e188d6ef 100644 --- a/include/asm-m68k/errno.h +++ b/arch/m68k/include/asm/errno.h diff --git a/arch/m68k/include/asm/fb.h b/arch/m68k/include/asm/fb.h new file mode 100644 index 00000000000..97bcaefd206 --- /dev/null +++ b/arch/m68k/include/asm/fb.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "fb_no.h" +#else +#include "fb_mm.h" +#endif diff --git a/include/asm-m68k/fb.h b/arch/m68k/include/asm/fb_mm.h index 380b97ae815..380b97ae815 100644 --- a/include/asm-m68k/fb.h +++ b/arch/m68k/include/asm/fb_mm.h diff --git a/arch/m68knommu/include/asm/fb.h b/arch/m68k/include/asm/fb_no.h index c7df3803099..c7df3803099 100644 --- a/arch/m68knommu/include/asm/fb.h +++ b/arch/m68k/include/asm/fb_no.h diff --git a/include/asm-m68k/fbio.h b/arch/m68k/include/asm/fbio.h index b9215a0907d..b9215a0907d 100644 --- a/include/asm-m68k/fbio.h +++ b/arch/m68k/include/asm/fbio.h diff --git a/include/asm-m68k/fcntl.h b/arch/m68k/include/asm/fcntl.h index 1c369b20dc4..1c369b20dc4 100644 --- a/include/asm-m68k/fcntl.h +++ b/arch/m68k/include/asm/fcntl.h diff --git a/arch/m68knommu/include/asm/flat.h b/arch/m68k/include/asm/flat.h index 814b5174a8e..814b5174a8e 100644 --- a/arch/m68knommu/include/asm/flat.h +++ b/arch/m68k/include/asm/flat.h diff --git a/include/asm-m68k/floppy.h b/arch/m68k/include/asm/floppy.h index 697d50393dd..697d50393dd 100644 --- a/include/asm-m68k/floppy.h +++ b/arch/m68k/include/asm/floppy.h diff --git a/arch/m68k/include/asm/fpu.h b/arch/m68k/include/asm/fpu.h new file mode 100644 index 00000000000..e19bc5ed9c3 --- /dev/null +++ b/arch/m68k/include/asm/fpu.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "fpu_no.h" +#else +#include "fpu_mm.h" +#endif diff --git a/include/asm-m68k/fpu.h b/arch/m68k/include/asm/fpu_mm.h index ffb6b8cfc6d..ffb6b8cfc6d 100644 --- a/include/asm-m68k/fpu.h +++ b/arch/m68k/include/asm/fpu_mm.h diff --git a/arch/m68knommu/include/asm/fpu.h b/arch/m68k/include/asm/fpu_no.h index b16b2e4fca2..b16b2e4fca2 100644 --- a/arch/m68knommu/include/asm/fpu.h +++ b/arch/m68k/include/asm/fpu_no.h diff --git a/arch/m68knommu/include/asm/futex.h b/arch/m68k/include/asm/futex.h index 6a332a9f099..6a332a9f099 100644 --- a/arch/m68knommu/include/asm/futex.h +++ b/arch/m68k/include/asm/futex.h diff --git a/arch/m68k/include/asm/hardirq.h b/arch/m68k/include/asm/hardirq.h new file mode 100644 index 00000000000..56d0d5db231 --- /dev/null +++ b/arch/m68k/include/asm/hardirq.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "hardirq_no.h" +#else +#include "hardirq_mm.h" +#endif diff --git a/include/asm-m68k/hardirq.h b/arch/m68k/include/asm/hardirq_mm.h index 394ee946015..394ee946015 100644 --- a/include/asm-m68k/hardirq.h +++ b/arch/m68k/include/asm/hardirq_mm.h diff --git a/arch/m68knommu/include/asm/hardirq.h b/arch/m68k/include/asm/hardirq_no.h index bfad28149a4..bfad28149a4 100644 --- a/arch/m68knommu/include/asm/hardirq.h +++ b/arch/m68k/include/asm/hardirq_no.h diff --git a/include/asm-m68k/hp300hw.h b/arch/m68k/include/asm/hp300hw.h index d998ea67c19..d998ea67c19 100644 --- a/include/asm-m68k/hp300hw.h +++ b/arch/m68k/include/asm/hp300hw.h diff --git a/arch/m68k/include/asm/hw_irq.h b/arch/m68k/include/asm/hw_irq.h new file mode 100644 index 00000000000..e1952601589 --- /dev/null +++ b/arch/m68k/include/asm/hw_irq.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "hw_irq_no.h" +#else +#include "hw_irq_mm.h" +#endif diff --git a/include/asm-m68k/hw_irq.h b/arch/m68k/include/asm/hw_irq_mm.h index eacef0951fb..eacef0951fb 100644 --- a/include/asm-m68k/hw_irq.h +++ b/arch/m68k/include/asm/hw_irq_mm.h diff --git a/arch/m68knommu/include/asm/hw_irq.h b/arch/m68k/include/asm/hw_irq_no.h index f3ec9e5ae04..f3ec9e5ae04 100644 --- a/arch/m68knommu/include/asm/hw_irq.h +++ b/arch/m68k/include/asm/hw_irq_no.h diff --git a/include/asm-m68k/hwtest.h b/arch/m68k/include/asm/hwtest.h index 402c8a4401f..402c8a4401f 100644 --- a/include/asm-m68k/hwtest.h +++ b/arch/m68k/include/asm/hwtest.h diff --git a/include/asm-m68k/ide.h b/arch/m68k/include/asm/ide.h index b996a3c8cff..b996a3c8cff 100644 --- a/include/asm-m68k/ide.h +++ b/arch/m68k/include/asm/ide.h diff --git a/include/asm-m68k/idprom.h b/arch/m68k/include/asm/idprom.h index 160616a89e0..160616a89e0 100644 --- a/include/asm-m68k/idprom.h +++ b/arch/m68k/include/asm/idprom.h diff --git a/include/asm-m68k/intersil.h b/arch/m68k/include/asm/intersil.h index f482902cac8..f482902cac8 100644 --- a/include/asm-m68k/intersil.h +++ b/arch/m68k/include/asm/intersil.h diff --git a/arch/m68k/include/asm/io.h b/arch/m68k/include/asm/io.h new file mode 100644 index 00000000000..c7210ba184e --- /dev/null +++ b/arch/m68k/include/asm/io.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "io_no.h" +#else +#include "io_mm.h" +#endif diff --git a/include/asm-m68k/io.h b/arch/m68k/include/asm/io_mm.h index 9e673e3bd43..9e673e3bd43 100644 --- a/include/asm-m68k/io.h +++ b/arch/m68k/include/asm/io_mm.h diff --git a/arch/m68knommu/include/asm/io.h b/arch/m68k/include/asm/io_no.h index 6adef1ee208..6adef1ee208 100644 --- a/arch/m68knommu/include/asm/io.h +++ b/arch/m68k/include/asm/io_no.h diff --git a/arch/m68knommu/include/asm/ioctl.h b/arch/m68k/include/asm/ioctl.h index b279fe06dfe..b279fe06dfe 100644 --- a/arch/m68knommu/include/asm/ioctl.h +++ b/arch/m68k/include/asm/ioctl.h diff --git a/include/asm-m68k/ioctls.h b/arch/m68k/include/asm/ioctls.h index b8d2f4be7fd..b8d2f4be7fd 100644 --- a/include/asm-m68k/ioctls.h +++ b/arch/m68k/include/asm/ioctls.h diff --git a/include/asm-m68k/ipcbuf.h b/arch/m68k/include/asm/ipcbuf.h index a623ea3f095..a623ea3f095 100644 --- a/include/asm-m68k/ipcbuf.h +++ b/arch/m68k/include/asm/ipcbuf.h diff --git a/arch/m68k/include/asm/irq.h b/arch/m68k/include/asm/irq.h new file mode 100644 index 00000000000..d031416595b --- /dev/null +++ b/arch/m68k/include/asm/irq.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "irq_no.h" +#else +#include "irq_mm.h" +#endif diff --git a/include/asm-m68k/irq.h b/arch/m68k/include/asm/irq_mm.h index 226bfc0f21b..226bfc0f21b 100644 --- a/include/asm-m68k/irq.h +++ b/arch/m68k/include/asm/irq_mm.h diff --git a/arch/m68knommu/include/asm/irq.h b/arch/m68k/include/asm/irq_no.h index 9373c31ac87..9373c31ac87 100644 --- a/arch/m68knommu/include/asm/irq.h +++ b/arch/m68k/include/asm/irq_no.h diff --git a/arch/m68knommu/include/asm/irq_regs.h b/arch/m68k/include/asm/irq_regs.h index 3dd9c0b7027..3dd9c0b7027 100644 --- a/arch/m68knommu/include/asm/irq_regs.h +++ b/arch/m68k/include/asm/irq_regs.h diff --git a/arch/m68knommu/include/asm/kdebug.h b/arch/m68k/include/asm/kdebug.h index 6ece1b03766..6ece1b03766 100644 --- a/arch/m68knommu/include/asm/kdebug.h +++ b/arch/m68k/include/asm/kdebug.h diff --git a/arch/m68k/include/asm/kmap_types.h b/arch/m68k/include/asm/kmap_types.h new file mode 100644 index 00000000000..045d9fd122a --- /dev/null +++ b/arch/m68k/include/asm/kmap_types.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "kmap_types_no.h" +#else +#include "kmap_types_mm.h" +#endif diff --git a/include/asm-m68k/kmap_types.h b/arch/m68k/include/asm/kmap_types_mm.h index c843c63d380..c843c63d380 100644 --- a/include/asm-m68k/kmap_types.h +++ b/arch/m68k/include/asm/kmap_types_mm.h diff --git a/arch/m68knommu/include/asm/kmap_types.h b/arch/m68k/include/asm/kmap_types_no.h index bfb6707575d..bfb6707575d 100644 --- a/arch/m68knommu/include/asm/kmap_types.h +++ b/arch/m68k/include/asm/kmap_types_no.h diff --git a/include/asm-m68k/linkage.h b/arch/m68k/include/asm/linkage.h index 5a822bb790f..5a822bb790f 100644 --- a/include/asm-m68k/linkage.h +++ b/arch/m68k/include/asm/linkage.h diff --git a/include/asm-m68k/local.h b/arch/m68k/include/asm/local.h index 6c259263e1f..6c259263e1f 100644 --- a/include/asm-m68k/local.h +++ b/arch/m68k/include/asm/local.h diff --git a/arch/m68knommu/include/asm/m5206sim.h b/arch/m68k/include/asm/m5206sim.h index 7e3594dea88..7e3594dea88 100644 --- a/arch/m68knommu/include/asm/m5206sim.h +++ b/arch/m68k/include/asm/m5206sim.h diff --git a/arch/m68knommu/include/asm/m520xsim.h b/arch/m68k/include/asm/m520xsim.h index 49d016e6391..49d016e6391 100644 --- a/arch/m68knommu/include/asm/m520xsim.h +++ b/arch/m68k/include/asm/m520xsim.h diff --git a/arch/m68knommu/include/asm/m523xsim.h b/arch/m68k/include/asm/m523xsim.h index bf397313e93..bf397313e93 100644 --- a/arch/m68knommu/include/asm/m523xsim.h +++ b/arch/m68k/include/asm/m523xsim.h diff --git a/arch/m68knommu/include/asm/m5249sim.h b/arch/m68k/include/asm/m5249sim.h index 366eb8602d2..366eb8602d2 100644 --- a/arch/m68knommu/include/asm/m5249sim.h +++ b/arch/m68k/include/asm/m5249sim.h diff --git a/arch/m68knommu/include/asm/m5272sim.h b/arch/m68k/include/asm/m5272sim.h index 6217edc2113..6217edc2113 100644 --- a/arch/m68knommu/include/asm/m5272sim.h +++ b/arch/m68k/include/asm/m5272sim.h diff --git a/arch/m68knommu/include/asm/m527xsim.h b/arch/m68k/include/asm/m527xsim.h index 1f63ab3fb3e..1f63ab3fb3e 100644 --- a/arch/m68knommu/include/asm/m527xsim.h +++ b/arch/m68k/include/asm/m527xsim.h diff --git a/arch/m68knommu/include/asm/m528xsim.h b/arch/m68k/include/asm/m528xsim.h index 28bf783a5d6..28bf783a5d6 100644 --- a/arch/m68knommu/include/asm/m528xsim.h +++ b/arch/m68k/include/asm/m528xsim.h diff --git a/arch/m68knommu/include/asm/m5307sim.h b/arch/m68k/include/asm/m5307sim.h index 5886728409c..5886728409c 100644 --- a/arch/m68knommu/include/asm/m5307sim.h +++ b/arch/m68k/include/asm/m5307sim.h diff --git a/arch/m68knommu/include/asm/m532xsim.h b/arch/m68k/include/asm/m532xsim.h index 1835fd20a82..1835fd20a82 100644 --- a/arch/m68knommu/include/asm/m532xsim.h +++ b/arch/m68k/include/asm/m532xsim.h diff --git a/arch/m68knommu/include/asm/m5407sim.h b/arch/m68k/include/asm/m5407sim.h index cc22c4a5300..cc22c4a5300 100644 --- a/arch/m68knommu/include/asm/m5407sim.h +++ b/arch/m68k/include/asm/m5407sim.h diff --git a/arch/m68knommu/include/asm/m68360.h b/arch/m68k/include/asm/m68360.h index eb7d39ef285..eb7d39ef285 100644 --- a/arch/m68knommu/include/asm/m68360.h +++ b/arch/m68k/include/asm/m68360.h diff --git a/arch/m68knommu/include/asm/m68360_enet.h b/arch/m68k/include/asm/m68360_enet.h index c36f4d05920..c36f4d05920 100644 --- a/arch/m68knommu/include/asm/m68360_enet.h +++ b/arch/m68k/include/asm/m68360_enet.h diff --git a/arch/m68knommu/include/asm/m68360_pram.h b/arch/m68k/include/asm/m68360_pram.h index e6088bbce93..e6088bbce93 100644 --- a/arch/m68knommu/include/asm/m68360_pram.h +++ b/arch/m68k/include/asm/m68360_pram.h diff --git a/arch/m68knommu/include/asm/m68360_quicc.h b/arch/m68k/include/asm/m68360_quicc.h index 6d40f4d18e1..6d40f4d18e1 100644 --- a/arch/m68knommu/include/asm/m68360_quicc.h +++ b/arch/m68k/include/asm/m68360_quicc.h diff --git a/arch/m68knommu/include/asm/m68360_regs.h b/arch/m68k/include/asm/m68360_regs.h index d57217ca4f2..d57217ca4f2 100644 --- a/arch/m68knommu/include/asm/m68360_regs.h +++ b/arch/m68k/include/asm/m68360_regs.h diff --git a/include/asm-m68k/mac_asc.h b/arch/m68k/include/asm/mac_asc.h index fc2e5467b41..fc2e5467b41 100644 --- a/include/asm-m68k/mac_asc.h +++ b/arch/m68k/include/asm/mac_asc.h diff --git a/include/asm-m68k/mac_baboon.h b/arch/m68k/include/asm/mac_baboon.h index c2a042b8c34..c2a042b8c34 100644 --- a/include/asm-m68k/mac_baboon.h +++ b/arch/m68k/include/asm/mac_baboon.h diff --git a/include/asm-m68k/mac_iop.h b/arch/m68k/include/asm/mac_iop.h index a2c7e6fcca3..a2c7e6fcca3 100644 --- a/include/asm-m68k/mac_iop.h +++ b/arch/m68k/include/asm/mac_iop.h diff --git a/include/asm-m68k/mac_mouse.h b/arch/m68k/include/asm/mac_mouse.h index 39a5c292eae..39a5c292eae 100644 --- a/include/asm-m68k/mac_mouse.h +++ b/arch/m68k/include/asm/mac_mouse.h diff --git a/include/asm-m68k/mac_oss.h b/arch/m68k/include/asm/mac_oss.h index 7221f725193..7221f725193 100644 --- a/include/asm-m68k/mac_oss.h +++ b/arch/m68k/include/asm/mac_oss.h diff --git a/include/asm-m68k/mac_psc.h b/arch/m68k/include/asm/mac_psc.h index 7808bb0b232..7808bb0b232 100644 --- a/include/asm-m68k/mac_psc.h +++ b/arch/m68k/include/asm/mac_psc.h diff --git a/include/asm-m68k/mac_via.h b/arch/m68k/include/asm/mac_via.h index 39afb438b65..39afb438b65 100644 --- a/include/asm-m68k/mac_via.h +++ b/arch/m68k/include/asm/mac_via.h diff --git a/arch/m68k/include/asm/machdep.h b/arch/m68k/include/asm/machdep.h new file mode 100644 index 00000000000..fc24b6fc550 --- /dev/null +++ b/arch/m68k/include/asm/machdep.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "machdep_no.h" +#else +#include "machdep_mm.h" +#endif diff --git a/include/asm-m68k/machdep.h b/arch/m68k/include/asm/machdep_mm.h index 5637dcef314..5637dcef314 100644 --- a/include/asm-m68k/machdep.h +++ b/arch/m68k/include/asm/machdep_mm.h diff --git a/arch/m68knommu/include/asm/machdep.h b/arch/m68k/include/asm/machdep_no.h index de9f47a51cc..de9f47a51cc 100644 --- a/arch/m68knommu/include/asm/machdep.h +++ b/arch/m68k/include/asm/machdep_no.h diff --git a/include/asm-m68k/machines.h b/arch/m68k/include/asm/machines.h index be667e84f01..be667e84f01 100644 --- a/include/asm-m68k/machines.h +++ b/arch/m68k/include/asm/machines.h diff --git a/include/asm-m68k/machw.h b/arch/m68k/include/asm/machw.h index 2b4de0c2ce4..2b4de0c2ce4 100644 --- a/include/asm-m68k/machw.h +++ b/arch/m68k/include/asm/machw.h diff --git a/include/asm-m68k/macintosh.h b/arch/m68k/include/asm/macintosh.h index 05309f7e3d0..05309f7e3d0 100644 --- a/include/asm-m68k/macintosh.h +++ b/arch/m68k/include/asm/macintosh.h diff --git a/include/asm-m68k/macints.h b/arch/m68k/include/asm/macints.h index 679c48ab440..679c48ab440 100644 --- a/include/asm-m68k/macints.h +++ b/arch/m68k/include/asm/macints.h diff --git a/include/asm-m68k/math-emu.h b/arch/m68k/include/asm/math-emu.h index ddfab96403c..ddfab96403c 100644 --- a/include/asm-m68k/math-emu.h +++ b/arch/m68k/include/asm/math-emu.h diff --git a/arch/m68k/include/asm/mc146818rtc.h b/arch/m68k/include/asm/mc146818rtc.h new file mode 100644 index 00000000000..fb90dcf7842 --- /dev/null +++ b/arch/m68k/include/asm/mc146818rtc.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "mc146818rtc_no.h" +#else +#include "mc146818rtc_mm.h" +#endif diff --git a/include/asm-m68k/mc146818rtc.h b/arch/m68k/include/asm/mc146818rtc_mm.h index 9f70a01f73d..9f70a01f73d 100644 --- a/include/asm-m68k/mc146818rtc.h +++ b/arch/m68k/include/asm/mc146818rtc_mm.h diff --git a/arch/m68knommu/include/asm/mc146818rtc.h b/arch/m68k/include/asm/mc146818rtc_no.h index 907a0481a14..907a0481a14 100644 --- a/arch/m68knommu/include/asm/mc146818rtc.h +++ b/arch/m68k/include/asm/mc146818rtc_no.h diff --git a/arch/m68knommu/include/asm/mcfcache.h b/arch/m68k/include/asm/mcfcache.h index c042634fada..c042634fada 100644 --- a/arch/m68knommu/include/asm/mcfcache.h +++ b/arch/m68k/include/asm/mcfcache.h diff --git a/arch/m68knommu/include/asm/mcfdma.h b/arch/m68k/include/asm/mcfdma.h index 705c52c79cd..705c52c79cd 100644 --- a/arch/m68knommu/include/asm/mcfdma.h +++ b/arch/m68k/include/asm/mcfdma.h diff --git a/arch/m68knommu/include/asm/mcfmbus.h b/arch/m68k/include/asm/mcfmbus.h index 319899c47a2..319899c47a2 100644 --- a/arch/m68knommu/include/asm/mcfmbus.h +++ b/arch/m68k/include/asm/mcfmbus.h diff --git a/arch/m68knommu/include/asm/mcfne.h b/arch/m68k/include/asm/mcfne.h index 431f63aadd0..431f63aadd0 100644 --- a/arch/m68knommu/include/asm/mcfne.h +++ b/arch/m68k/include/asm/mcfne.h diff --git a/arch/m68knommu/include/asm/mcfpci.h b/arch/m68k/include/asm/mcfpci.h index f1507dd06ec..f1507dd06ec 100644 --- a/arch/m68knommu/include/asm/mcfpci.h +++ b/arch/m68k/include/asm/mcfpci.h diff --git a/arch/m68knommu/include/asm/mcfpit.h b/arch/m68k/include/asm/mcfpit.h index f570cf64fd2..f570cf64fd2 100644 --- a/arch/m68knommu/include/asm/mcfpit.h +++ b/arch/m68k/include/asm/mcfpit.h diff --git a/arch/m68knommu/include/asm/mcfsim.h b/arch/m68k/include/asm/mcfsim.h index da3f2ceff3a..da3f2ceff3a 100644 --- a/arch/m68knommu/include/asm/mcfsim.h +++ b/arch/m68k/include/asm/mcfsim.h diff --git a/arch/m68knommu/include/asm/mcfsmc.h b/arch/m68k/include/asm/mcfsmc.h index 2d7a4dbd968..2d7a4dbd968 100644 --- a/arch/m68knommu/include/asm/mcfsmc.h +++ b/arch/m68k/include/asm/mcfsmc.h diff --git a/arch/m68knommu/include/asm/mcftimer.h b/arch/m68k/include/asm/mcftimer.h index 0f90f6d2227..0f90f6d2227 100644 --- a/arch/m68knommu/include/asm/mcftimer.h +++ b/arch/m68k/include/asm/mcftimer.h diff --git a/arch/m68knommu/include/asm/mcfuart.h b/arch/m68k/include/asm/mcfuart.h index ef229387361..ef229387361 100644 --- a/arch/m68knommu/include/asm/mcfuart.h +++ b/arch/m68k/include/asm/mcfuart.h diff --git a/arch/m68knommu/include/asm/mcfwdebug.h b/arch/m68k/include/asm/mcfwdebug.h index 27f70e45d70..27f70e45d70 100644 --- a/arch/m68knommu/include/asm/mcfwdebug.h +++ b/arch/m68k/include/asm/mcfwdebug.h diff --git a/include/asm-m68k/md.h b/arch/m68k/include/asm/md.h index d2f78f226f3..d2f78f226f3 100644 --- a/include/asm-m68k/md.h +++ b/arch/m68k/include/asm/md.h diff --git a/include/asm-m68k/mman.h b/arch/m68k/include/asm/mman.h index 1626d37f489..1626d37f489 100644 --- a/include/asm-m68k/mman.h +++ b/arch/m68k/include/asm/mman.h diff --git a/arch/m68k/include/asm/mmu.h b/arch/m68k/include/asm/mmu.h new file mode 100644 index 00000000000..a81d3946675 --- /dev/null +++ b/arch/m68k/include/asm/mmu.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "mmu_no.h" +#else +#include "mmu_mm.h" +#endif diff --git a/arch/m68k/include/asm/mmu_context.h b/arch/m68k/include/asm/mmu_context.h new file mode 100644 index 00000000000..b440928fc6c --- /dev/null +++ b/arch/m68k/include/asm/mmu_context.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "mmu_context_no.h" +#else +#include "mmu_context_mm.h" +#endif diff --git a/include/asm-m68k/mmu_context.h b/arch/m68k/include/asm/mmu_context_mm.h index 894dacbcee1..894dacbcee1 100644 --- a/include/asm-m68k/mmu_context.h +++ b/arch/m68k/include/asm/mmu_context_mm.h diff --git a/arch/m68knommu/include/asm/mmu_context.h b/arch/m68k/include/asm/mmu_context_no.h index 9ccee4278c9..9ccee4278c9 100644 --- a/arch/m68knommu/include/asm/mmu_context.h +++ b/arch/m68k/include/asm/mmu_context_no.h diff --git a/include/asm-m68k/mmu.h b/arch/m68k/include/asm/mmu_mm.h index ccd36d26615..ccd36d26615 100644 --- a/include/asm-m68k/mmu.h +++ b/arch/m68k/include/asm/mmu_mm.h diff --git a/arch/m68knommu/include/asm/mmu.h b/arch/m68k/include/asm/mmu_no.h index e2da1e6f09f..e2da1e6f09f 100644 --- a/arch/m68knommu/include/asm/mmu.h +++ b/arch/m68k/include/asm/mmu_no.h diff --git a/include/asm-m68k/mmzone.h b/arch/m68k/include/asm/mmzone.h index e1f1ec7b700..e1f1ec7b700 100644 --- a/include/asm-m68k/mmzone.h +++ b/arch/m68k/include/asm/mmzone.h diff --git a/arch/m68k/include/asm/module.h b/arch/m68k/include/asm/module.h new file mode 100644 index 00000000000..79b59d137dd --- /dev/null +++ b/arch/m68k/include/asm/module.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "module_no.h" +#else +#include "module_mm.h" +#endif diff --git a/include/asm-m68k/module.h b/arch/m68k/include/asm/module_mm.h index 382d20a6fc1..382d20a6fc1 100644 --- a/include/asm-m68k/module.h +++ b/arch/m68k/include/asm/module_mm.h diff --git a/arch/m68knommu/include/asm/module.h b/arch/m68k/include/asm/module_no.h index 2e45ab50b23..2e45ab50b23 100644 --- a/arch/m68knommu/include/asm/module.h +++ b/arch/m68k/include/asm/module_no.h diff --git a/include/asm-m68k/motorola_pgalloc.h b/arch/m68k/include/asm/motorola_pgalloc.h index d08bf6261df..d08bf6261df 100644 --- a/include/asm-m68k/motorola_pgalloc.h +++ b/arch/m68k/include/asm/motorola_pgalloc.h diff --git a/include/asm-m68k/motorola_pgtable.h b/arch/m68k/include/asm/motorola_pgtable.h index 8e9a8a754dd..8e9a8a754dd 100644 --- a/include/asm-m68k/motorola_pgtable.h +++ b/arch/m68k/include/asm/motorola_pgtable.h diff --git a/include/asm-m68k/movs.h b/arch/m68k/include/asm/movs.h index 67dbea36960..67dbea36960 100644 --- a/include/asm-m68k/movs.h +++ b/arch/m68k/include/asm/movs.h diff --git a/include/asm-m68k/msgbuf.h b/arch/m68k/include/asm/msgbuf.h index 243cb798de8..243cb798de8 100644 --- a/include/asm-m68k/msgbuf.h +++ b/arch/m68k/include/asm/msgbuf.h diff --git a/arch/m68knommu/include/asm/mutex.h b/arch/m68k/include/asm/mutex.h index 458c1f7fbc1..458c1f7fbc1 100644 --- a/arch/m68knommu/include/asm/mutex.h +++ b/arch/m68k/include/asm/mutex.h diff --git a/include/asm-m68k/mvme147hw.h b/arch/m68k/include/asm/mvme147hw.h index b8104310847..b8104310847 100644 --- a/include/asm-m68k/mvme147hw.h +++ b/arch/m68k/include/asm/mvme147hw.h diff --git a/include/asm-m68k/mvme16xhw.h b/arch/m68k/include/asm/mvme16xhw.h index 6117f56653d..6117f56653d 100644 --- a/include/asm-m68k/mvme16xhw.h +++ b/arch/m68k/include/asm/mvme16xhw.h diff --git a/arch/m68knommu/include/asm/nettel.h b/arch/m68k/include/asm/nettel.h index 0299f6a2dee..0299f6a2dee 100644 --- a/arch/m68knommu/include/asm/nettel.h +++ b/arch/m68k/include/asm/nettel.h diff --git a/include/asm-m68k/nubus.h b/arch/m68k/include/asm/nubus.h index d6be9976f1a..d6be9976f1a 100644 --- a/include/asm-m68k/nubus.h +++ b/arch/m68k/include/asm/nubus.h diff --git a/include/asm-m68k/openprom.h b/arch/m68k/include/asm/openprom.h index d33cdadf78e..d33cdadf78e 100644 --- a/include/asm-m68k/openprom.h +++ b/arch/m68k/include/asm/openprom.h diff --git a/include/asm-m68k/oplib.h b/arch/m68k/include/asm/oplib.h index f082d03336b..f082d03336b 100644 --- a/include/asm-m68k/oplib.h +++ b/arch/m68k/include/asm/oplib.h diff --git a/arch/m68k/include/asm/page.h b/arch/m68k/include/asm/page.h new file mode 100644 index 00000000000..f2b4480cc98 --- /dev/null +++ b/arch/m68k/include/asm/page.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "page_no.h" +#else +#include "page_mm.h" +#endif diff --git a/include/asm-m68k/page.h b/arch/m68k/include/asm/page_mm.h index a34b8bad784..a34b8bad784 100644 --- a/include/asm-m68k/page.h +++ b/arch/m68k/include/asm/page_mm.h diff --git a/arch/m68knommu/include/asm/page.h b/arch/m68k/include/asm/page_no.h index 3a1ede4544c..3a1ede4544c 100644 --- a/arch/m68knommu/include/asm/page.h +++ b/arch/m68k/include/asm/page_no.h diff --git a/arch/m68k/include/asm/page_offset.h b/arch/m68k/include/asm/page_offset.h new file mode 100644 index 00000000000..66455c849fb --- /dev/null +++ b/arch/m68k/include/asm/page_offset.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "page_offset_no.h" +#else +#include "page_offset_mm.h" +#endif diff --git a/include/asm-m68k/page_offset.h b/arch/m68k/include/asm/page_offset_mm.h index 1cbdb7f30ac..1cbdb7f30ac 100644 --- a/include/asm-m68k/page_offset.h +++ b/arch/m68k/include/asm/page_offset_mm.h diff --git a/arch/m68knommu/include/asm/page_offset.h b/arch/m68k/include/asm/page_offset_no.h index d4e73e0ba64..d4e73e0ba64 100644 --- a/arch/m68knommu/include/asm/page_offset.h +++ b/arch/m68k/include/asm/page_offset_no.h diff --git a/arch/m68k/include/asm/param.h b/arch/m68k/include/asm/param.h new file mode 100644 index 00000000000..40d1112a458 --- /dev/null +++ b/arch/m68k/include/asm/param.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "param_no.h" +#else +#include "param_mm.h" +#endif diff --git a/include/asm-m68k/param.h b/arch/m68k/include/asm/param_mm.h index 536a2788835..536a2788835 100644 --- a/include/asm-m68k/param.h +++ b/arch/m68k/include/asm/param_mm.h diff --git a/arch/m68knommu/include/asm/param.h b/arch/m68k/include/asm/param_no.h index 6044397adb6..6044397adb6 100644 --- a/arch/m68knommu/include/asm/param.h +++ b/arch/m68k/include/asm/param_no.h diff --git a/include/asm-m68k/parport.h b/arch/m68k/include/asm/parport.h index 646b1872f73..646b1872f73 100644 --- a/include/asm-m68k/parport.h +++ b/arch/m68k/include/asm/parport.h diff --git a/arch/m68k/include/asm/pci.h b/arch/m68k/include/asm/pci.h new file mode 100644 index 00000000000..dbea9537308 --- /dev/null +++ b/arch/m68k/include/asm/pci.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "pci_no.h" +#else +#include "pci_mm.h" +#endif diff --git a/include/asm-m68k/pci.h b/arch/m68k/include/asm/pci_mm.h index 4ad0aea48ab..4ad0aea48ab 100644 --- a/include/asm-m68k/pci.h +++ b/arch/m68k/include/asm/pci_mm.h diff --git a/arch/m68knommu/include/asm/pci.h b/arch/m68k/include/asm/pci_no.h index a13f3cc8745..9abbc03c73e 100644 --- a/arch/m68knommu/include/asm/pci.h +++ b/arch/m68k/include/asm/pci_no.h @@ -1,7 +1,7 @@ #ifndef M68KNOMMU_PCI_H #define M68KNOMMU_PCI_H -#include <asm-m68k/pci.h> +#include <asm/pci_mm.h> #ifdef CONFIG_COMEMPCI /* diff --git a/include/asm-m68k/percpu.h b/arch/m68k/include/asm/percpu.h index 0859d048faf..0859d048faf 100644 --- a/include/asm-m68k/percpu.h +++ b/arch/m68k/include/asm/percpu.h diff --git a/arch/m68k/include/asm/pgalloc.h b/arch/m68k/include/asm/pgalloc.h new file mode 100644 index 00000000000..059cb73e78f --- /dev/null +++ b/arch/m68k/include/asm/pgalloc.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "pgalloc_no.h" +#else +#include "pgalloc_mm.h" +#endif diff --git a/include/asm-m68k/pgalloc.h b/arch/m68k/include/asm/pgalloc_mm.h index 4cb1a57ab76..4cb1a57ab76 100644 --- a/include/asm-m68k/pgalloc.h +++ b/arch/m68k/include/asm/pgalloc_mm.h diff --git a/arch/m68knommu/include/asm/pgalloc.h b/arch/m68k/include/asm/pgalloc_no.h index d6352f671ec..d6352f671ec 100644 --- a/arch/m68knommu/include/asm/pgalloc.h +++ b/arch/m68k/include/asm/pgalloc_no.h diff --git a/arch/m68k/include/asm/pgtable.h b/arch/m68k/include/asm/pgtable.h new file mode 100644 index 00000000000..ee6759eb445 --- /dev/null +++ b/arch/m68k/include/asm/pgtable.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "pgtable_no.h" +#else +#include "pgtable_mm.h" +#endif diff --git a/include/asm-m68k/pgtable.h b/arch/m68k/include/asm/pgtable_mm.h index 0b604f0f192..0b604f0f192 100644 --- a/include/asm-m68k/pgtable.h +++ b/arch/m68k/include/asm/pgtable_mm.h diff --git a/arch/m68knommu/include/asm/pgtable.h b/arch/m68k/include/asm/pgtable_no.h index 46251016e82..46251016e82 100644 --- a/arch/m68knommu/include/asm/pgtable.h +++ b/arch/m68k/include/asm/pgtable_no.h diff --git a/include/asm-m68k/poll.h b/arch/m68k/include/asm/poll.h index f080fcdb61b..f080fcdb61b 100644 --- a/include/asm-m68k/poll.h +++ b/arch/m68k/include/asm/poll.h diff --git a/include/asm-m68k/posix_types.h b/arch/m68k/include/asm/posix_types.h index 63cdcc142d9..63cdcc142d9 100644 --- a/include/asm-m68k/posix_types.h +++ b/arch/m68k/include/asm/posix_types.h diff --git a/arch/m68k/include/asm/processor.h b/arch/m68k/include/asm/processor.h new file mode 100644 index 00000000000..fc3f2c22f2b --- /dev/null +++ b/arch/m68k/include/asm/processor.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "processor_no.h" +#else +#include "processor_mm.h" +#endif diff --git a/include/asm-m68k/processor.h b/arch/m68k/include/asm/processor_mm.h index 1f61ef53f0e..1f61ef53f0e 100644 --- a/include/asm-m68k/processor.h +++ b/arch/m68k/include/asm/processor_mm.h diff --git a/arch/m68knommu/include/asm/processor.h b/arch/m68k/include/asm/processor_no.h index 91cba18acdd..91cba18acdd 100644 --- a/arch/m68knommu/include/asm/processor.h +++ b/arch/m68k/include/asm/processor_no.h diff --git a/arch/m68k/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace.h new file mode 100644 index 00000000000..e83cd2f6610 --- /dev/null +++ b/arch/m68k/include/asm/ptrace.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "ptrace_no.h" +#else +#include "ptrace_mm.h" +#endif diff --git a/include/asm-m68k/ptrace.h b/arch/m68k/include/asm/ptrace_mm.h index 57e763d79bf..57e763d79bf 100644 --- a/include/asm-m68k/ptrace.h +++ b/arch/m68k/include/asm/ptrace_mm.h diff --git a/arch/m68knommu/include/asm/ptrace.h b/arch/m68k/include/asm/ptrace_no.h index 8c9194b9854..8c9194b9854 100644 --- a/arch/m68knommu/include/asm/ptrace.h +++ b/arch/m68k/include/asm/ptrace_no.h diff --git a/include/asm-m68k/q40_master.h b/arch/m68k/include/asm/q40_master.h index 3907a09d4fc..3907a09d4fc 100644 --- a/include/asm-m68k/q40_master.h +++ b/arch/m68k/include/asm/q40_master.h diff --git a/include/asm-m68k/q40ints.h b/arch/m68k/include/asm/q40ints.h index 3d970afb708..3d970afb708 100644 --- a/include/asm-m68k/q40ints.h +++ b/arch/m68k/include/asm/q40ints.h diff --git a/arch/m68knommu/include/asm/quicc_simple.h b/arch/m68k/include/asm/quicc_simple.h index c3636932d4b..c3636932d4b 100644 --- a/arch/m68knommu/include/asm/quicc_simple.h +++ b/arch/m68k/include/asm/quicc_simple.h diff --git a/include/asm-m68k/raw_io.h b/arch/m68k/include/asm/raw_io.h index d9eb9834ccc..d9eb9834ccc 100644 --- a/include/asm-m68k/raw_io.h +++ b/arch/m68k/include/asm/raw_io.h diff --git a/include/asm-m68k/resource.h b/arch/m68k/include/asm/resource.h index e7d35019f33..e7d35019f33 100644 --- a/include/asm-m68k/resource.h +++ b/arch/m68k/include/asm/resource.h diff --git a/include/asm-m68k/rtc.h b/arch/m68k/include/asm/rtc.h index 5d3e0385984..5d3e0385984 100644 --- a/include/asm-m68k/rtc.h +++ b/arch/m68k/include/asm/rtc.h diff --git a/include/asm-m68k/sbus.h b/arch/m68k/include/asm/sbus.h index bfe3ba147f2..bfe3ba147f2 100644 --- a/include/asm-m68k/sbus.h +++ b/arch/m68k/include/asm/sbus.h diff --git a/arch/m68k/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist.h new file mode 100644 index 00000000000..b7e52863625 --- /dev/null +++ b/arch/m68k/include/asm/scatterlist.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "scatterlist_no.h" +#else +#include "scatterlist_mm.h" +#endif diff --git a/include/asm-m68k/scatterlist.h b/arch/m68k/include/asm/scatterlist_mm.h index d3a7a0edfec..d3a7a0edfec 100644 --- a/include/asm-m68k/scatterlist.h +++ b/arch/m68k/include/asm/scatterlist_mm.h diff --git a/arch/m68knommu/include/asm/scatterlist.h b/arch/m68k/include/asm/scatterlist_no.h index afc4788b0d2..afc4788b0d2 100644 --- a/arch/m68knommu/include/asm/scatterlist.h +++ b/arch/m68k/include/asm/scatterlist_no.h diff --git a/include/asm-m68k/sections.h b/arch/m68k/include/asm/sections.h index d64967ecfec..d64967ecfec 100644 --- a/include/asm-m68k/sections.h +++ b/arch/m68k/include/asm/sections.h diff --git a/arch/m68k/include/asm/segment.h b/arch/m68k/include/asm/segment.h new file mode 100644 index 00000000000..82583bc004b --- /dev/null +++ b/arch/m68k/include/asm/segment.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "segment_no.h" +#else +#include "segment_mm.h" +#endif diff --git a/include/asm-m68k/segment.h b/arch/m68k/include/asm/segment_mm.h index 7b0b2d3127f..7b0b2d3127f 100644 --- a/include/asm-m68k/segment.h +++ b/arch/m68k/include/asm/segment_mm.h diff --git a/arch/m68knommu/include/asm/segment.h b/arch/m68k/include/asm/segment_no.h index 42318ebec7e..42318ebec7e 100644 --- a/arch/m68knommu/include/asm/segment.h +++ b/arch/m68k/include/asm/segment_no.h diff --git a/include/asm-m68k/sembuf.h b/arch/m68k/include/asm/sembuf.h index 2308052a8c2..2308052a8c2 100644 --- a/include/asm-m68k/sembuf.h +++ b/arch/m68k/include/asm/sembuf.h diff --git a/include/asm-m68k/serial.h b/arch/m68k/include/asm/serial.h index 2b90d6e6907..2b90d6e6907 100644 --- a/include/asm-m68k/serial.h +++ b/arch/m68k/include/asm/serial.h diff --git a/arch/m68k/include/asm/setup.h b/arch/m68k/include/asm/setup.h new file mode 100644 index 00000000000..842f86f75cc --- /dev/null +++ b/arch/m68k/include/asm/setup.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "setup_no.h" +#else +#include "setup_mm.h" +#endif diff --git a/include/asm-m68k/setup.h b/arch/m68k/include/asm/setup_mm.h index 4dfb3952b37..4dfb3952b37 100644 --- a/include/asm-m68k/setup.h +++ b/arch/m68k/include/asm/setup_mm.h diff --git a/arch/m68knommu/include/asm/setup.h b/arch/m68k/include/asm/setup_no.h index fb86bb2a607..45d286ce939 100644 --- a/arch/m68knommu/include/asm/setup.h +++ b/arch/m68k/include/asm/setup_no.h @@ -1,6 +1,6 @@ #ifdef __KERNEL__ -#include <asm-m68k/setup.h> +#include <asm/setup_mm.h> /* We have a bigger command line buffer. */ #undef COMMAND_LINE_SIZE diff --git a/include/asm-m68k/shm.h b/arch/m68k/include/asm/shm.h index fa56ec84a12..fa56ec84a12 100644 --- a/include/asm-m68k/shm.h +++ b/arch/m68k/include/asm/shm.h diff --git a/include/asm-m68k/shmbuf.h b/arch/m68k/include/asm/shmbuf.h index f8928d62f1b..f8928d62f1b 100644 --- a/include/asm-m68k/shmbuf.h +++ b/arch/m68k/include/asm/shmbuf.h diff --git a/include/asm-m68k/shmparam.h b/arch/m68k/include/asm/shmparam.h index 558892a2efb..558892a2efb 100644 --- a/include/asm-m68k/shmparam.h +++ b/arch/m68k/include/asm/shmparam.h diff --git a/arch/m68k/include/asm/sigcontext.h b/arch/m68k/include/asm/sigcontext.h new file mode 100644 index 00000000000..bff6d40345a --- /dev/null +++ b/arch/m68k/include/asm/sigcontext.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "sigcontext_no.h" +#else +#include "sigcontext_mm.h" +#endif diff --git a/include/asm-m68k/sigcontext.h b/arch/m68k/include/asm/sigcontext_mm.h index 64fbe34cf26..64fbe34cf26 100644 --- a/include/asm-m68k/sigcontext.h +++ b/arch/m68k/include/asm/sigcontext_mm.h diff --git a/arch/m68knommu/include/asm/sigcontext.h b/arch/m68k/include/asm/sigcontext_no.h index 36c293fc133..36c293fc133 100644 --- a/arch/m68knommu/include/asm/sigcontext.h +++ b/arch/m68k/include/asm/sigcontext_no.h diff --git a/arch/m68k/include/asm/siginfo.h b/arch/m68k/include/asm/siginfo.h new file mode 100644 index 00000000000..61219d7affc --- /dev/null +++ b/arch/m68k/include/asm/siginfo.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "siginfo_no.h" +#else +#include "siginfo_mm.h" +#endif diff --git a/include/asm-m68k/siginfo.h b/arch/m68k/include/asm/siginfo_mm.h index 05a8d6d90b5..05a8d6d90b5 100644 --- a/include/asm-m68k/siginfo.h +++ b/arch/m68k/include/asm/siginfo_mm.h diff --git a/arch/m68knommu/include/asm/siginfo.h b/arch/m68k/include/asm/siginfo_no.h index b18e5f4064a..b18e5f4064a 100644 --- a/arch/m68knommu/include/asm/siginfo.h +++ b/arch/m68k/include/asm/siginfo_no.h diff --git a/arch/m68k/include/asm/signal.h b/arch/m68k/include/asm/signal.h new file mode 100644 index 00000000000..3c19988bd93 --- /dev/null +++ b/arch/m68k/include/asm/signal.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "signal_no.h" +#else +#include "signal_mm.h" +#endif diff --git a/include/asm-m68k/signal.h b/arch/m68k/include/asm/signal_mm.h index 3db8a81942f..3db8a81942f 100644 --- a/include/asm-m68k/signal.h +++ b/arch/m68k/include/asm/signal_mm.h diff --git a/arch/m68knommu/include/asm/signal.h b/arch/m68k/include/asm/signal_no.h index 216c08be54a..216c08be54a 100644 --- a/arch/m68knommu/include/asm/signal.h +++ b/arch/m68k/include/asm/signal_no.h diff --git a/arch/m68knommu/include/asm/smp.h b/arch/m68k/include/asm/smp.h index 9e9bd7e5892..9e9bd7e5892 100644 --- a/arch/m68knommu/include/asm/smp.h +++ b/arch/m68k/include/asm/smp.h diff --git a/include/asm-m68k/socket.h b/arch/m68k/include/asm/socket.h index dbc64e92c41..dbc64e92c41 100644 --- a/include/asm-m68k/socket.h +++ b/arch/m68k/include/asm/socket.h diff --git a/include/asm-m68k/sockios.h b/arch/m68k/include/asm/sockios.h index c04a23943cb..c04a23943cb 100644 --- a/include/asm-m68k/sockios.h +++ b/arch/m68k/include/asm/sockios.h diff --git a/include/asm-m68k/spinlock.h b/arch/m68k/include/asm/spinlock.h index 20f46e27b53..20f46e27b53 100644 --- a/include/asm-m68k/spinlock.h +++ b/arch/m68k/include/asm/spinlock.h diff --git a/include/asm-m68k/stat.h b/arch/m68k/include/asm/stat.h index dd38bc2e9f9..dd38bc2e9f9 100644 --- a/include/asm-m68k/stat.h +++ b/arch/m68k/include/asm/stat.h diff --git a/include/asm-m68k/statfs.h b/arch/m68k/include/asm/statfs.h index 08d93f14e06..08d93f14e06 100644 --- a/include/asm-m68k/statfs.h +++ b/arch/m68k/include/asm/statfs.h diff --git a/arch/m68k/include/asm/string.h b/arch/m68k/include/asm/string.h new file mode 100644 index 00000000000..2c356f90f17 --- /dev/null +++ b/arch/m68k/include/asm/string.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "string_no.h" +#else +#include "string_mm.h" +#endif diff --git a/include/asm-m68k/string.h b/arch/m68k/include/asm/string_mm.h index 2eb7df1e0f5..2eb7df1e0f5 100644 --- a/include/asm-m68k/string.h +++ b/arch/m68k/include/asm/string_mm.h diff --git a/arch/m68knommu/include/asm/string.h b/arch/m68k/include/asm/string_no.h index af09e17000f..af09e17000f 100644 --- a/arch/m68knommu/include/asm/string.h +++ b/arch/m68k/include/asm/string_no.h diff --git a/include/asm-m68k/sun3-head.h b/arch/m68k/include/asm/sun3-head.h index 05af2f18b3b..05af2f18b3b 100644 --- a/include/asm-m68k/sun3-head.h +++ b/arch/m68k/include/asm/sun3-head.h diff --git a/include/asm-m68k/sun3_pgalloc.h b/arch/m68k/include/asm/sun3_pgalloc.h index d4c83f14381..d4c83f14381 100644 --- a/include/asm-m68k/sun3_pgalloc.h +++ b/arch/m68k/include/asm/sun3_pgalloc.h diff --git a/include/asm-m68k/sun3_pgtable.h b/arch/m68k/include/asm/sun3_pgtable.h index f847ec732d6..f847ec732d6 100644 --- a/include/asm-m68k/sun3_pgtable.h +++ b/arch/m68k/include/asm/sun3_pgtable.h diff --git a/include/asm-m68k/sun3ints.h b/arch/m68k/include/asm/sun3ints.h index 309d6e6a137..309d6e6a137 100644 --- a/include/asm-m68k/sun3ints.h +++ b/arch/m68k/include/asm/sun3ints.h diff --git a/include/asm-m68k/sun3mmu.h b/arch/m68k/include/asm/sun3mmu.h index d8f17a0d8c9..d8f17a0d8c9 100644 --- a/include/asm-m68k/sun3mmu.h +++ b/arch/m68k/include/asm/sun3mmu.h diff --git a/include/asm-m68k/sun3x.h b/arch/m68k/include/asm/sun3x.h index f5691a1ed7c..f5691a1ed7c 100644 --- a/include/asm-m68k/sun3x.h +++ b/arch/m68k/include/asm/sun3x.h diff --git a/include/asm-m68k/sun3xflop.h b/arch/m68k/include/asm/sun3xflop.h index 32c45f84ac6..32c45f84ac6 100644 --- a/include/asm-m68k/sun3xflop.h +++ b/arch/m68k/include/asm/sun3xflop.h diff --git a/include/asm-m68k/sun3xprom.h b/arch/m68k/include/asm/sun3xprom.h index 6735efcf5f6..6735efcf5f6 100644 --- a/include/asm-m68k/sun3xprom.h +++ b/arch/m68k/include/asm/sun3xprom.h diff --git a/include/asm-m68k/suspend.h b/arch/m68k/include/asm/suspend.h index 57b3ddb4d26..57b3ddb4d26 100644 --- a/include/asm-m68k/suspend.h +++ b/arch/m68k/include/asm/suspend.h diff --git a/arch/m68k/include/asm/swab.h b/arch/m68k/include/asm/swab.h new file mode 100644 index 00000000000..7d7dde1c73e --- /dev/null +++ b/arch/m68k/include/asm/swab.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "swab_no.h" +#else +#include "swab_mm.h" +#endif diff --git a/include/asm-m68k/swab.h b/arch/m68k/include/asm/swab_mm.h index 7221e306682..7221e306682 100644 --- a/include/asm-m68k/swab.h +++ b/arch/m68k/include/asm/swab_mm.h diff --git a/arch/m68knommu/include/asm/swab.h b/arch/m68k/include/asm/swab_no.h index e582257db30..e582257db30 100644 --- a/arch/m68knommu/include/asm/swab.h +++ b/arch/m68k/include/asm/swab_no.h diff --git a/arch/m68k/include/asm/system.h b/arch/m68k/include/asm/system.h new file mode 100644 index 00000000000..ccea925ff4f --- /dev/null +++ b/arch/m68k/include/asm/system.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "system_no.h" +#else +#include "system_mm.h" +#endif diff --git a/include/asm-m68k/system.h b/arch/m68k/include/asm/system_mm.h index dbb6515ffd5..dbb6515ffd5 100644 --- a/include/asm-m68k/system.h +++ b/arch/m68k/include/asm/system_mm.h diff --git a/arch/m68knommu/include/asm/system.h b/arch/m68k/include/asm/system_no.h index 40f49de6982..4496c0aa837 100644 --- a/arch/m68knommu/include/asm/system.h +++ b/arch/m68k/include/asm/system_no.h @@ -230,7 +230,7 @@ static inline unsigned long __xchg(unsigned long x, volatile void * ptr, int siz jmp 0xf0000400; \ "); \ }) -#elif defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \ +#elif defined(CONFIG_NETtel) || \ defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA) #define HARD_RESET_NOW() ({ \ asm(" \ diff --git a/include/asm-m68k/termbits.h b/arch/m68k/include/asm/termbits.h index 8c14170996b..8c14170996b 100644 --- a/include/asm-m68k/termbits.h +++ b/arch/m68k/include/asm/termbits.h diff --git a/include/asm-m68k/termios.h b/arch/m68k/include/asm/termios.h index 0823032e404..0823032e404 100644 --- a/include/asm-m68k/termios.h +++ b/arch/m68k/include/asm/termios.h diff --git a/arch/m68k/include/asm/thread_info.h b/arch/m68k/include/asm/thread_info.h new file mode 100644 index 00000000000..f31a3f42b7b --- /dev/null +++ b/arch/m68k/include/asm/thread_info.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "thread_info_no.h" +#else +#include "thread_info_mm.h" +#endif diff --git a/include/asm-m68k/thread_info.h b/arch/m68k/include/asm/thread_info_mm.h index af0fda46e94..af0fda46e94 100644 --- a/include/asm-m68k/thread_info.h +++ b/arch/m68k/include/asm/thread_info_mm.h diff --git a/arch/m68knommu/include/asm/thread_info.h b/arch/m68k/include/asm/thread_info_no.h index 82529f424ea..82529f424ea 100644 --- a/arch/m68knommu/include/asm/thread_info.h +++ b/arch/m68k/include/asm/thread_info_no.h diff --git a/arch/m68k/include/asm/timex.h b/arch/m68k/include/asm/timex.h new file mode 100644 index 00000000000..71976298057 --- /dev/null +++ b/arch/m68k/include/asm/timex.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "timex_no.h" +#else +#include "timex_mm.h" +#endif diff --git a/include/asm-m68k/timex.h b/arch/m68k/include/asm/timex_mm.h index b87f2f278f6..b87f2f278f6 100644 --- a/include/asm-m68k/timex.h +++ b/arch/m68k/include/asm/timex_mm.h diff --git a/arch/m68knommu/include/asm/timex.h b/arch/m68k/include/asm/timex_no.h index 109050f3fe9..109050f3fe9 100644 --- a/arch/m68knommu/include/asm/timex.h +++ b/arch/m68k/include/asm/timex_no.h diff --git a/include/asm-m68k/tlb.h b/arch/m68k/include/asm/tlb.h index 1785cff7344..1785cff7344 100644 --- a/include/asm-m68k/tlb.h +++ b/arch/m68k/include/asm/tlb.h diff --git a/arch/m68k/include/asm/tlbflush.h b/arch/m68k/include/asm/tlbflush.h new file mode 100644 index 00000000000..b6f93b30951 --- /dev/null +++ b/arch/m68k/include/asm/tlbflush.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "tlbflush_no.h" +#else +#include "tlbflush_mm.h" +#endif diff --git a/include/asm-m68k/tlbflush.h b/arch/m68k/include/asm/tlbflush_mm.h index acb6bf21a32..acb6bf21a32 100644 --- a/include/asm-m68k/tlbflush.h +++ b/arch/m68k/include/asm/tlbflush_mm.h diff --git a/arch/m68knommu/include/asm/tlbflush.h b/arch/m68k/include/asm/tlbflush_no.h index a470cfb803e..a470cfb803e 100644 --- a/arch/m68knommu/include/asm/tlbflush.h +++ b/arch/m68k/include/asm/tlbflush_no.h diff --git a/arch/m68knommu/include/asm/topology.h b/arch/m68k/include/asm/topology.h index ca173e9f26f..ca173e9f26f 100644 --- a/arch/m68knommu/include/asm/topology.h +++ b/arch/m68k/include/asm/topology.h diff --git a/arch/m68k/include/asm/traps.h b/arch/m68k/include/asm/traps.h new file mode 100644 index 00000000000..3011ec0f536 --- /dev/null +++ b/arch/m68k/include/asm/traps.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "traps_no.h" +#else +#include "traps_mm.h" +#endif diff --git a/include/asm-m68k/traps.h b/arch/m68k/include/asm/traps_mm.h index 8caef25624c..8caef25624c 100644 --- a/include/asm-m68k/traps.h +++ b/arch/m68k/include/asm/traps_mm.h diff --git a/arch/m68knommu/include/asm/traps.h b/arch/m68k/include/asm/traps_no.h index d0671e5f8e2..d0671e5f8e2 100644 --- a/arch/m68knommu/include/asm/traps.h +++ b/arch/m68k/include/asm/traps_no.h diff --git a/include/asm-m68k/types.h b/arch/m68k/include/asm/types.h index 6441cb5f8e7..6441cb5f8e7 100644 --- a/include/asm-m68k/types.h +++ b/arch/m68k/include/asm/types.h diff --git a/arch/m68k/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess.h new file mode 100644 index 00000000000..38f92dbb9a4 --- /dev/null +++ b/arch/m68k/include/asm/uaccess.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "uaccess_no.h" +#else +#include "uaccess_mm.h" +#endif diff --git a/include/asm-m68k/uaccess.h b/arch/m68k/include/asm/uaccess_mm.h index 7107f3fbdbb..7107f3fbdbb 100644 --- a/include/asm-m68k/uaccess.h +++ b/arch/m68k/include/asm/uaccess_mm.h diff --git a/arch/m68knommu/include/asm/uaccess.h b/arch/m68k/include/asm/uaccess_no.h index 68bbe9b312f..68bbe9b312f 100644 --- a/arch/m68knommu/include/asm/uaccess.h +++ b/arch/m68k/include/asm/uaccess_no.h diff --git a/arch/m68k/include/asm/ucontext.h b/arch/m68k/include/asm/ucontext.h new file mode 100644 index 00000000000..b53cd160c0b --- /dev/null +++ b/arch/m68k/include/asm/ucontext.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "ucontext_no.h" +#else +#include "ucontext_mm.h" +#endif diff --git a/include/asm-m68k/ucontext.h b/arch/m68k/include/asm/ucontext_mm.h index e4e22669edc..e4e22669edc 100644 --- a/include/asm-m68k/ucontext.h +++ b/arch/m68k/include/asm/ucontext_mm.h diff --git a/arch/m68knommu/include/asm/ucontext.h b/arch/m68k/include/asm/ucontext_no.h index 713a27f901c..713a27f901c 100644 --- a/arch/m68knommu/include/asm/ucontext.h +++ b/arch/m68k/include/asm/ucontext_no.h diff --git a/arch/m68k/include/asm/unaligned.h b/arch/m68k/include/asm/unaligned.h new file mode 100644 index 00000000000..c640bba3bdf --- /dev/null +++ b/arch/m68k/include/asm/unaligned.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "unaligned_no.h" +#else +#include "unaligned_mm.h" +#endif diff --git a/include/asm-m68k/unaligned.h b/arch/m68k/include/asm/unaligned_mm.h index 77698f2dc33..77698f2dc33 100644 --- a/include/asm-m68k/unaligned.h +++ b/arch/m68k/include/asm/unaligned_mm.h diff --git a/arch/m68knommu/include/asm/unaligned.h b/arch/m68k/include/asm/unaligned_no.h index eb1ea4cb9a5..eb1ea4cb9a5 100644 --- a/arch/m68knommu/include/asm/unaligned.h +++ b/arch/m68k/include/asm/unaligned_no.h diff --git a/arch/m68k/include/asm/unistd.h b/arch/m68k/include/asm/unistd.h new file mode 100644 index 00000000000..df1d9d4cb1f --- /dev/null +++ b/arch/m68k/include/asm/unistd.h @@ -0,0 +1,5 @@ +#ifdef __uClinux__ +#include "unistd_no.h" +#else +#include "unistd_mm.h" +#endif diff --git a/include/asm-m68k/unistd.h b/arch/m68k/include/asm/unistd_mm.h index 3c19027331f..3c19027331f 100644 --- a/include/asm-m68k/unistd.h +++ b/arch/m68k/include/asm/unistd_mm.h diff --git a/arch/m68knommu/include/asm/unistd.h b/arch/m68k/include/asm/unistd_no.h index b034a2f7b44..b034a2f7b44 100644 --- a/arch/m68knommu/include/asm/unistd.h +++ b/arch/m68k/include/asm/unistd_no.h diff --git a/include/asm-m68k/user.h b/arch/m68k/include/asm/user.h index f1f478d6e05..f1f478d6e05 100644 --- a/include/asm-m68k/user.h +++ b/arch/m68k/include/asm/user.h diff --git a/include/asm-m68k/virtconvert.h b/arch/m68k/include/asm/virtconvert.h index 22ab05c9c52..22ab05c9c52 100644 --- a/include/asm-m68k/virtconvert.h +++ b/arch/m68k/include/asm/virtconvert.h diff --git a/include/asm-m68k/xor.h b/arch/m68k/include/asm/xor.h index c82eb12a5b1..c82eb12a5b1 100644 --- a/include/asm-m68k/xor.h +++ b/arch/m68k/include/asm/xor.h diff --git a/include/asm-m68k/zorro.h b/arch/m68k/include/asm/zorro.h index 5ce97c22b58..5ce97c22b58 100644 --- a/include/asm-m68k/zorro.h +++ b/arch/m68k/include/asm/zorro.h diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index 76b66feb74d..4beb59dfc6e 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -14,6 +14,10 @@ config MMU bool default n +config NO_DMA + bool + default y + config FPU bool default n @@ -398,12 +402,6 @@ config M5307C3 help Support for the Motorola M5307C3 board. -config eLIA - bool "Moreton Bay eLIA board support" - depends on M5307 - help - Support for the Moreton Bay eLIA board. - config SECUREEDGEMP3 bool "SnapGear SecureEdge/MP3 platform support" depends on M5307 @@ -697,25 +695,8 @@ config ISA_DMA_API depends on !M5272 default y -menu "Bus options (PCI, PCMCIA, EISA, MCA, ISA)" - -config PCI - bool "PCI support" - help - Support for PCI bus. - -config COMEMPCI - bool "CO-MEM lite PCI controller support" - depends on (M5307 || M5407) - -source "drivers/pci/Kconfig" - source "drivers/pcmcia/Kconfig" -source "drivers/pci/hotplug/Kconfig" - -endmenu - menu "Executable file formats" source "fs/Kconfig.binfmt" diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile index b63bbcf874f..fd0fb303d88 100644 --- a/arch/m68knommu/Makefile +++ b/arch/m68knommu/Makefile @@ -41,7 +41,6 @@ board-$(CONFIG_M5271EVB) := M5271EVB board-$(CONFIG_M5275EVB) := M5275EVB board-$(CONFIG_M5282EVB) := M5282EVB board-$(CONFIG_ELITE) := eLITE -board-$(CONFIG_eLIA) := eLIA board-$(CONFIG_NETtel) := NETtel board-$(CONFIG_SECUREEDGEMP3) := MP3 board-$(CONFIG_CLEOPATRA) := CLEOPATRA diff --git a/arch/m68knommu/include/asm/Kbuild b/arch/m68knommu/include/asm/Kbuild deleted file mode 100644 index c68e1680da0..00000000000 --- a/arch/m68knommu/include/asm/Kbuild +++ /dev/null @@ -1 +0,0 @@ -include include/asm-generic/Kbuild.asm diff --git a/arch/m68knommu/include/asm/byteorder.h b/arch/m68knommu/include/asm/byteorder.h deleted file mode 100644 index 9c6c76a1504..00000000000 --- a/arch/m68knommu/include/asm/byteorder.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _M68KNOMMU_BYTEORDER_H -#define _M68KNOMMU_BYTEORDER_H - -#include <linux/byteorder/big_endian.h> - -#endif /* _M68KNOMMU_BYTEORDER_H */ diff --git a/arch/m68knommu/include/asm/cachectl.h b/arch/m68knommu/include/asm/cachectl.h deleted file mode 100644 index bcf5a6a9dd5..00000000000 --- a/arch/m68knommu/include/asm/cachectl.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/cachectl.h> diff --git a/arch/m68knommu/include/asm/cputime.h b/arch/m68knommu/include/asm/cputime.h deleted file mode 100644 index a0c4a660878..00000000000 --- a/arch/m68knommu/include/asm/cputime.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __M68KNOMMU_CPUTIME_H -#define __M68KNOMMU_CPUTIME_H - -#include <asm-generic/cputime.h> - -#endif /* __M68KNOMMU_CPUTIME_H */ diff --git a/arch/m68knommu/include/asm/errno.h b/arch/m68knommu/include/asm/errno.h deleted file mode 100644 index 7e8c22b9a5e..00000000000 --- a/arch/m68knommu/include/asm/errno.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/errno.h> diff --git a/arch/m68knommu/include/asm/fcntl.h b/arch/m68knommu/include/asm/fcntl.h deleted file mode 100644 index f6a552cda4c..00000000000 --- a/arch/m68knommu/include/asm/fcntl.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/fcntl.h> diff --git a/arch/m68knommu/include/asm/hwtest.h b/arch/m68knommu/include/asm/hwtest.h deleted file mode 100644 index 700626a1b1b..00000000000 --- a/arch/m68knommu/include/asm/hwtest.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/hwtest.h> diff --git a/arch/m68knommu/include/asm/ioctls.h b/arch/m68knommu/include/asm/ioctls.h deleted file mode 100644 index 0b1eb4d8505..00000000000 --- a/arch/m68knommu/include/asm/ioctls.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/ioctls.h> diff --git a/arch/m68knommu/include/asm/ipcbuf.h b/arch/m68knommu/include/asm/ipcbuf.h deleted file mode 100644 index e4a7be6dd70..00000000000 --- a/arch/m68knommu/include/asm/ipcbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/ipcbuf.h> diff --git a/arch/m68knommu/include/asm/linkage.h b/arch/m68knommu/include/asm/linkage.h deleted file mode 100644 index c288a19ff48..00000000000 --- a/arch/m68knommu/include/asm/linkage.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/linkage.h> diff --git a/arch/m68knommu/include/asm/local.h b/arch/m68knommu/include/asm/local.h deleted file mode 100644 index 84a39c1b86f..00000000000 --- a/arch/m68knommu/include/asm/local.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __M68KNOMMU_LOCAL_H -#define __M68KNOMMU_LOCAL_H - -#include <asm-generic/local.h> - -#endif /* __M68KNOMMU_LOCAL_H */ diff --git a/arch/m68knommu/include/asm/math-emu.h b/arch/m68knommu/include/asm/math-emu.h deleted file mode 100644 index 7e7090517b7..00000000000 --- a/arch/m68knommu/include/asm/math-emu.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/math-emu.h> diff --git a/arch/m68knommu/include/asm/md.h b/arch/m68knommu/include/asm/md.h deleted file mode 100644 index d810c78de5f..00000000000 --- a/arch/m68knommu/include/asm/md.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/md.h> diff --git a/arch/m68knommu/include/asm/mman.h b/arch/m68knommu/include/asm/mman.h deleted file mode 100644 index 4846c682efe..00000000000 --- a/arch/m68knommu/include/asm/mman.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/mman.h> diff --git a/arch/m68knommu/include/asm/movs.h b/arch/m68knommu/include/asm/movs.h deleted file mode 100644 index 81a16779e83..00000000000 --- a/arch/m68knommu/include/asm/movs.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/movs.h> diff --git a/arch/m68knommu/include/asm/msgbuf.h b/arch/m68knommu/include/asm/msgbuf.h deleted file mode 100644 index bdfadec4d52..00000000000 --- a/arch/m68knommu/include/asm/msgbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/msgbuf.h> diff --git a/arch/m68knommu/include/asm/openprom.h b/arch/m68knommu/include/asm/openprom.h deleted file mode 100644 index fdba7953ff9..00000000000 --- a/arch/m68knommu/include/asm/openprom.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/openprom.h> diff --git a/arch/m68knommu/include/asm/oplib.h b/arch/m68knommu/include/asm/oplib.h deleted file mode 100644 index ce079dc332d..00000000000 --- a/arch/m68knommu/include/asm/oplib.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/oplib.h> diff --git a/arch/m68knommu/include/asm/percpu.h b/arch/m68knommu/include/asm/percpu.h deleted file mode 100644 index 5de72c327ef..00000000000 --- a/arch/m68knommu/include/asm/percpu.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef __ARCH_M68KNOMMU_PERCPU__ -#define __ARCH_M68KNOMMU_PERCPU__ - -#include <asm-generic/percpu.h> - -#endif /* __ARCH_M68KNOMMU_PERCPU__ */ diff --git a/arch/m68knommu/include/asm/poll.h b/arch/m68knommu/include/asm/poll.h deleted file mode 100644 index ee1b6cb549c..00000000000 --- a/arch/m68knommu/include/asm/poll.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/poll.h> diff --git a/arch/m68knommu/include/asm/posix_types.h b/arch/m68knommu/include/asm/posix_types.h deleted file mode 100644 index 6205fb9392a..00000000000 --- a/arch/m68knommu/include/asm/posix_types.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/posix_types.h> diff --git a/arch/m68knommu/include/asm/resource.h b/arch/m68knommu/include/asm/resource.h deleted file mode 100644 index 7fa63d5ea57..00000000000 --- a/arch/m68knommu/include/asm/resource.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/resource.h> diff --git a/arch/m68knommu/include/asm/rtc.h b/arch/m68knommu/include/asm/rtc.h deleted file mode 100644 index eaf18ec83c8..00000000000 --- a/arch/m68knommu/include/asm/rtc.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/rtc.h> diff --git a/arch/m68knommu/include/asm/sections.h b/arch/m68knommu/include/asm/sections.h deleted file mode 100644 index dd0ecb98ec0..00000000000 --- a/arch/m68knommu/include/asm/sections.h +++ /dev/null @@ -1,7 +0,0 @@ -#ifndef _M68KNOMMU_SECTIONS_H -#define _M68KNOMMU_SECTIONS_H - -/* nothing to see, move along */ -#include <asm-generic/sections.h> - -#endif diff --git a/arch/m68knommu/include/asm/sembuf.h b/arch/m68knommu/include/asm/sembuf.h deleted file mode 100644 index 3a634f9ecf5..00000000000 --- a/arch/m68knommu/include/asm/sembuf.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/sembuf.h> diff --git a/arch/m68knommu/include/asm/shm.h b/arch/m68knommu/include/asm/shm.h deleted file mode 100644 index cc8e522d905..00000000000 --- a/arch/m68knommu/include/asm/shm.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/shm.h> diff --git a/arch/m68knommu/include/asm/shmbuf.h b/arch/m68knommu/include/asm/shmbuf.h deleted file mode 100644 index bc34cf8eefc..00000000000 --- a/arch/m68knommu/include/asm/shmbuf.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/shmbuf.h> diff --git a/arch/m68knommu/include/asm/shmparam.h b/arch/m68knommu/include/asm/shmparam.h deleted file mode 100644 index d7ee69648eb..00000000000 --- a/arch/m68knommu/include/asm/shmparam.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/shmparam.h> diff --git a/arch/m68knommu/include/asm/socket.h b/arch/m68knommu/include/asm/socket.h deleted file mode 100644 index ac5478bf637..00000000000 --- a/arch/m68knommu/include/asm/socket.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/socket.h> diff --git a/arch/m68knommu/include/asm/sockios.h b/arch/m68knommu/include/asm/sockios.h deleted file mode 100644 index dcc6a8900ce..00000000000 --- a/arch/m68knommu/include/asm/sockios.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/sockios.h> diff --git a/arch/m68knommu/include/asm/spinlock.h b/arch/m68knommu/include/asm/spinlock.h deleted file mode 100644 index 6bb1f06c478..00000000000 --- a/arch/m68knommu/include/asm/spinlock.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/spinlock.h> diff --git a/arch/m68knommu/include/asm/stat.h b/arch/m68knommu/include/asm/stat.h deleted file mode 100644 index 3d4b260e7c0..00000000000 --- a/arch/m68knommu/include/asm/stat.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/stat.h> diff --git a/arch/m68knommu/include/asm/statfs.h b/arch/m68knommu/include/asm/statfs.h deleted file mode 100644 index 2ce99eaf097..00000000000 --- a/arch/m68knommu/include/asm/statfs.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/statfs.h> diff --git a/arch/m68knommu/include/asm/termbits.h b/arch/m68knommu/include/asm/termbits.h deleted file mode 100644 index 05dd6bc2728..00000000000 --- a/arch/m68knommu/include/asm/termbits.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/termbits.h> diff --git a/arch/m68knommu/include/asm/termios.h b/arch/m68knommu/include/asm/termios.h deleted file mode 100644 index e7337881a98..00000000000 --- a/arch/m68knommu/include/asm/termios.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/termios.h> diff --git a/arch/m68knommu/include/asm/tlb.h b/arch/m68knommu/include/asm/tlb.h deleted file mode 100644 index 77a7c51ca29..00000000000 --- a/arch/m68knommu/include/asm/tlb.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/tlb.h> diff --git a/arch/m68knommu/include/asm/types.h b/arch/m68knommu/include/asm/types.h deleted file mode 100644 index 031238c2d18..00000000000 --- a/arch/m68knommu/include/asm/types.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/types.h> diff --git a/arch/m68knommu/include/asm/user.h b/arch/m68knommu/include/asm/user.h deleted file mode 100644 index a5a555b761c..00000000000 --- a/arch/m68knommu/include/asm/user.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-m68k/user.h> diff --git a/arch/m68knommu/kernel/Makefile b/arch/m68knommu/kernel/Makefile index f0eab3dedb5..37c3fc074c0 100644 --- a/arch/m68knommu/kernel/Makefile +++ b/arch/m68knommu/kernel/Makefile @@ -8,4 +8,3 @@ obj-y += dma.o entry.o init_task.o irq.o m68k_ksyms.o process.o ptrace.o \ setup.o signal.o syscalltable.o sys_m68k.o time.o traps.o obj-$(CONFIG_MODULES) += module.o -obj-$(CONFIG_COMEMPCI) += comempci.o diff --git a/arch/m68knommu/kernel/comempci.c b/arch/m68knommu/kernel/comempci.c deleted file mode 100644 index 0a68b5a85f8..00000000000 --- a/arch/m68knommu/kernel/comempci.c +++ /dev/null @@ -1,980 +0,0 @@ -/*****************************************************************************/ - -/* - * comemlite.c -- PCI access code for embedded CO-MEM Lite PCI controller. - * - * (C) Copyright 1999-2003, Greg Ungerer (gerg@snapgear.com). - * (C) Copyright 2000, Lineo (www.lineo.com) - */ - -/*****************************************************************************/ - -#include <linux/kernel.h> -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/ptrace.h> -#include <linux/spinlock.h> -#include <linux/interrupt.h> -#include <linux/sched.h> -#include <asm/coldfire.h> -#include <asm/mcfsim.h> -#include <asm/irq.h> -#include <asm/anchor.h> - -#ifdef CONFIG_eLIA -#include <asm/elia.h> -#endif - -/*****************************************************************************/ - -/* - * Debug configuration defines. DEBUGRES sets debugging output for - * the resource allocation phase. DEBUGPCI traces on pcibios_ function - * calls, and DEBUGIO traces all accesses to devices on the PCI bus. - */ -/*#define DEBUGRES 1*/ -/*#define DEBUGPCI 1*/ -/*#define DEBUGIO 1*/ - -/*****************************************************************************/ - -/* - * PCI markers for bus present and active slots. - */ -int pci_bus_is_present = 0; -unsigned long pci_slotmask = 0; - -/* - * We may or may not need to swap the bytes of PCI bus tranfers. - * The endianess is re-roder automatically by the CO-MEM, but it - * will get the wrong byte order for a pure data stream. - */ -#define pci_byteswap 0 - - -/* - * Resource tracking. The CO-MEM part creates a virtual address - * space that all the PCI devices live in - it is not in any way - * directly mapped into the ColdFire address space. So we can - * really assign any resources we like to devices, as long as - * they do not clash with other PCI devices. - */ -unsigned int pci_iobase = PCIBIOS_MIN_IO; /* Arbitrary start address */ -unsigned int pci_membase = PCIBIOS_MIN_MEM; /* Arbitrary start address */ - -#define PCI_MINIO 0x100 /* 256 byte minimum I/O */ -#define PCI_MINMEM 0x00010000 /* 64k minimum chunk */ - -/* - * The CO-MEM's shared memory segment is visible inside the PCI - * memory address space. We need to keep track of the address that - * this is mapped at, to setup the bus masters pointers. - */ -unsigned int pci_shmemaddr; - -/*****************************************************************************/ - -void pci_interrupt(int irq, void *id, struct pt_regs *fp); - -/*****************************************************************************/ - -/* - * Some platforms have custom ways of reseting the PCI bus. - */ - -void pci_resetbus(void) -{ -#ifdef CONFIG_eLIA - int i; - -#ifdef DEBUGPCI - printk(KERN_DEBUG "pci_resetbus()\n"); -#endif - - *((volatile unsigned short *) (MCF_MBAR+MCFSIM_PADDR)) |= eLIA_PCIRESET; - for (i = 0; (i < 1000); i++) { - *((volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT)) = - (ppdata | eLIA_PCIRESET); - } - - - *((volatile unsigned short *) (MCF_MBAR + MCFSIM_PADAT)) = ppdata; -#endif -} - -/*****************************************************************************/ - -int pcibios_assign_resource_slot(int slot) -{ - volatile unsigned long *rp; - volatile unsigned char *ip; - unsigned int idsel, addr, val, align, i; - int bar; - -#ifdef DEBUGPCI - printk(KERN_INFO "pcibios_assign_resource_slot(slot=%x)\n", slot); -#endif - - rp = (volatile unsigned long *) COMEM_BASE; - idsel = COMEM_DA_ADDR(0x1 << (slot + 16)); - - /* Try to assign resource to each BAR */ - for (bar = 0; (bar < 6); bar++) { - addr = COMEM_PCIBUS + PCI_BASE_ADDRESS_0 + (bar * 4); - rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGRD | idsel; - val = rp[LREG(addr)]; -#ifdef DEBUGRES - printk(KERN_DEBUG "-----------------------------------" - "-------------------------------------\n"); - printk(KERN_DEBUG "BAR[%d]: read=%08x ", bar, val); -#endif - - rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGWR | idsel; - rp[LREG(addr)] = 0xffffffff; - - rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGRD | idsel; - val = rp[LREG(addr)]; -#ifdef DEBUGRES - printk(KERN_DEBUG "write=%08x ", val); -#endif - if (val == 0) { -#ifdef DEBUGRES - printk(KERN_DEBUG "\n"); -#endif - continue; - } - - /* Determine space required by BAR */ - /* FIXME: this should go backwords from 0x80000000... */ - for (i = 0; (i < 32); i++) { - if ((0x1 << i) & (val & 0xfffffffc)) - break; - } - -#ifdef DEBUGRES - printk(KERN_DEBUG "size=%08x(%d)\n", (0x1 << i), i); -#endif - i = 0x1 << i; - - /* Assign a resource */ - if (val & PCI_BASE_ADDRESS_SPACE_IO) { - if (i < PCI_MINIO) - i = PCI_MINIO; -#ifdef DEBUGRES - printk(KERN_DEBUG "BAR[%d]: IO size=%08x iobase=%08x\n", - bar, i, pci_iobase); -#endif - if (i > 0xffff) { - /* Invalid size?? */ - val = 0 | PCI_BASE_ADDRESS_SPACE_IO; -#ifdef DEBUGRES - printk(KERN_DEBUG "BAR[%d]: too big for IO??\n", bar); -#endif - } else { - /* Check for un-alignment */ - if ((align = pci_iobase % i)) - pci_iobase += (i - align); - val = pci_iobase | PCI_BASE_ADDRESS_SPACE_IO; - pci_iobase += i; - } - } else { - if (i < PCI_MINMEM) - i = PCI_MINMEM; -#ifdef DEBUGRES - printk(KERN_DEBUG "BAR[%d]: MEMORY size=%08x membase=%08x\n", - bar, i, pci_membase); -#endif - /* Check for un-alignment */ - if ((align = pci_membase % i)) - pci_membase += (i - align); - val = pci_membase | PCI_BASE_ADDRESS_SPACE_MEMORY; - pci_membase += i; - } - - /* Write resource back into BAR register */ - rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGWR | idsel; - rp[LREG(addr)] = val; -#ifdef DEBUGRES - printk(KERN_DEBUG "BAR[%d]: assigned bar=%08x\n", bar, val); -#endif - } - -#ifdef DEBUGRES - printk(KERN_DEBUG "-----------------------------------" - "-------------------------------------\n"); -#endif - - /* Assign IRQ if one is wanted... */ - ip = (volatile unsigned char *) (COMEM_BASE + COMEM_PCIBUS); - rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGRD | idsel; - - addr = (PCI_INTERRUPT_PIN & 0xfc) + (~PCI_INTERRUPT_PIN & 0x03); - if (ip[addr]) { - rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGWR | idsel; - addr = (PCI_INTERRUPT_LINE & 0xfc)+(~PCI_INTERRUPT_LINE & 0x03); - ip[addr] = 25; -#ifdef DEBUGRES - printk(KERN_DEBUG "IRQ LINE=25\n"); -#endif - } - - return(0); -} - -/*****************************************************************************/ - -int pcibios_enable_slot(int slot) -{ - volatile unsigned long *rp; - volatile unsigned short *wp; - unsigned int idsel, addr; - unsigned short cmd; - -#ifdef DEBUGPCI - printk(KERN_DEBUG "pcibios_enbale_slot(slot=%x)\n", slot); -#endif - - rp = (volatile unsigned long *) COMEM_BASE; - wp = (volatile unsigned short *) COMEM_BASE; - idsel = COMEM_DA_ADDR(0x1 << (slot + 16)); - - /* Get current command settings */ - addr = COMEM_PCIBUS + PCI_COMMAND; - addr = (addr & ~0x3) + (~addr & 0x02); - rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGRD | idsel; - cmd = wp[WREG(addr)]; - /*val = ((val & 0xff) << 8) | ((val >> 8) & 0xff);*/ - - /* Enable I/O and memory accesses to this device */ - rp[LREG(COMEM_DAHBASE)] = COMEM_DA_CFGWR | idsel; - cmd |= PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER; - wp[WREG(addr)] = cmd; - - return(0); -} - -/*****************************************************************************/ - -void pcibios_assign_resources(void) -{ - volatile unsigned long *rp; - unsigned long sel, id; - int slot; - - rp = (volatile unsigned long *) COMEM_BASE; - - /* - * Do a quick scan of the PCI bus and see what is here. - */ - for (slot = COMEM_MINDEV; (slot <= COMEM_MAXDEV); slot++) { - sel = COMEM_DA_CFGRD | COMEM_DA_ADDR(0x1 << (slot + 16)); - rp[LREG(COMEM_DAHBASE)] = sel; - rp[LREG(COMEM_PCIBUS)] = 0; /* Clear bus */ - id = rp[LREG(COMEM_PCIBUS)]; - if ((id != 0) && ((id & 0xffff0000) != (sel & 0xffff0000))) { - printk(KERN_INFO "PCI: slot=%d id=%08x\n", slot, (int) id); - pci_slotmask |= 0x1 << slot; - pcibios_assign_resource_slot(slot); - pcibios_enable_slot(slot); - } - } -} - -/*****************************************************************************/ - -int pcibios_init(void) -{ - volatile unsigned long *rp; - unsigned long sel, id; - int slot; - -#ifdef DEBUGPCI - printk(KERN_DEBUG "pcibios_init()\n"); -#endif - - pci_resetbus(); - - /* - * Do some sort of basic check to see if the CO-MEM part - * is present... This works ok, but I think we really need - * something better... - */ - rp = (volatile unsigned long *) COMEM_BASE; - if ((rp[LREG(COMEM_LBUSCFG)] & 0xff) != 0x50) { - printk(KERN_INFO "PCI: no PCI bus present\n"); - return(0); - } - -#ifdef COMEM_BRIDGEDEV - /* - * Setup the PCI bridge device first. It needs resources too, - * so that bus masters can get to its shared memory. - */ - slot = COMEM_BRIDGEDEV; - sel = COMEM_DA_CFGRD | COMEM_DA_ADDR(0x1 << (slot + 16)); - rp[LREG(COMEM_DAHBASE)] = sel; - rp[LREG(COMEM_PCIBUS)] = 0; /* Clear bus */ - id = rp[LREG(COMEM_PCIBUS)]; - if ((id == 0) || ((id & 0xffff0000) == (sel & 0xffff0000))) { - printk(KERN_INFO "PCI: no PCI bus bridge present\n"); - return(0); - } - - printk(KERN_INFO "PCI: bridge device at slot=%d id=%08x\n", slot, (int) id); - pci_slotmask |= 0x1 << slot; - pci_shmemaddr = pci_membase; - pcibios_assign_resource_slot(slot); - pcibios_enable_slot(slot); -#endif - - pci_bus_is_present = 1; - - /* Get PCI irq for local vectoring */ - if (request_irq(COMEM_IRQ, pci_interrupt, 0, "PCI bridge", NULL)) { - printk(KERN_WARNING "PCI: failed to acquire interrupt %d\n", COMEM_IRQ); - } else { - mcf_autovector(COMEM_IRQ); - } - - pcibios_assign_resources(); - - return(0); -} - -/*****************************************************************************/ - -char *pcibios_setup(char *option) -{ - /* Nothing for us to handle. */ - return(option); -} -/*****************************************************************************/ - -void pcibios_fixup_bus(struct pci_bus *b) -{ -} - -/*****************************************************************************/ - -void pcibios_align_resource(void *data, struct resource *res, - resource_size_t size, resource_size_t align) -{ -} - -/*****************************************************************************/ - -int pcibios_enable_device(struct pci_dev *dev, int mask) -{ - int slot; - - slot = PCI_SLOT(dev->devfn); - if ((dev->bus == 0) && (pci_slotmask & (1 << slot))) - pcibios_enable_slot(slot); - return(0); -} - -/*****************************************************************************/ - -/* - * Local routines to interrcept the standard I/O and vector handling - * code. Don't include this 'till now - initialization code above needs - * access to the real code too. - */ -#include <asm/mcfpci.h> - -/*****************************************************************************/ - -void pci_outb(unsigned char val, unsigned int addr) -{ - volatile unsigned long *rp; - volatile unsigned char *bp; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_outb(val=%02x,addr=%x)\n", val, addr); -#endif - - rp = (volatile unsigned long *) COMEM_BASE; - bp = (volatile unsigned char *) COMEM_BASE; - rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IOWR | COMEM_DA_ADDR(addr); - addr = (addr & ~0x3) + (~addr & 0x03); - bp[(COMEM_PCIBUS + COMEM_DA_OFFSET(addr))] = val; -} - -/*****************************************************************************/ - -void pci_outw(unsigned short val, unsigned int addr) -{ - volatile unsigned long *rp; - volatile unsigned short *sp; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_outw(val=%04x,addr=%x)\n", val, addr); -#endif - - rp = (volatile unsigned long *) COMEM_BASE; - sp = (volatile unsigned short *) COMEM_BASE; - rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IOWR | COMEM_DA_ADDR(addr); - addr = (addr & ~0x3) + (~addr & 0x02); - if (pci_byteswap) - val = ((val & 0xff) << 8) | ((val >> 8) & 0xff); - sp[WREG(COMEM_PCIBUS + COMEM_DA_OFFSET(addr))] = val; -} - -/*****************************************************************************/ - -void pci_outl(unsigned int val, unsigned int addr) -{ - volatile unsigned long *rp; - volatile unsigned int *lp; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_outl(val=%08x,addr=%x)\n", val, addr); -#endif - - rp = (volatile unsigned long *) COMEM_BASE; - lp = (volatile unsigned int *) COMEM_BASE; - rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IOWR | COMEM_DA_ADDR(addr); - - if (pci_byteswap) - val = (val << 24) | ((val & 0x0000ff00) << 8) | - ((val & 0x00ff0000) >> 8) | (val >> 24); - - lp[LREG(COMEM_PCIBUS + COMEM_DA_OFFSET(addr))] = val; -} - -/*****************************************************************************/ - -unsigned long pci_blmask[] = { - 0x000000e0, - 0x000000d0, - 0x000000b0, - 0x00000070 -}; - -unsigned char pci_inb(unsigned int addr) -{ - volatile unsigned long *rp; - volatile unsigned char *bp; - unsigned long r; - unsigned char val; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_inb(addr=%x)\n", addr); -#endif - - rp = (volatile unsigned long *) COMEM_BASE; - bp = (volatile unsigned char *) COMEM_BASE; - - r = COMEM_DA_IORD | COMEM_DA_ADDR(addr) | pci_blmask[(addr & 0x3)]; - rp[LREG(COMEM_DAHBASE)] = r; - - addr = (addr & ~0x3) + (~addr & 0x3); - val = bp[(COMEM_PCIBUS + COMEM_DA_OFFSET(addr))]; - return(val); -} - -/*****************************************************************************/ - -unsigned long pci_bwmask[] = { - 0x000000c0, - 0x000000c0, - 0x00000030, - 0x00000030 -}; - -unsigned short pci_inw(unsigned int addr) -{ - volatile unsigned long *rp; - volatile unsigned short *sp; - unsigned long r; - unsigned short val; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_inw(addr=%x)", addr); -#endif - - rp = (volatile unsigned long *) COMEM_BASE; - r = COMEM_DA_IORD | COMEM_DA_ADDR(addr) | pci_bwmask[(addr & 0x3)]; - rp[LREG(COMEM_DAHBASE)] = r; - - sp = (volatile unsigned short *) COMEM_BASE; - addr = (addr & ~0x3) + (~addr & 0x02); - val = sp[WREG(COMEM_PCIBUS + COMEM_DA_OFFSET(addr))]; - if (pci_byteswap) - val = ((val & 0xff) << 8) | ((val >> 8) & 0xff); -#ifdef DEBUGIO - printk(KERN_DEBUG "=%04x\n", val); -#endif - return(val); -} - -/*****************************************************************************/ - -unsigned int pci_inl(unsigned int addr) -{ - volatile unsigned long *rp; - volatile unsigned int *lp; - unsigned int val; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_inl(addr=%x)", addr); -#endif - - rp = (volatile unsigned long *) COMEM_BASE; - lp = (volatile unsigned int *) COMEM_BASE; - rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IORD | COMEM_DA_ADDR(addr); - val = lp[LREG(COMEM_PCIBUS + COMEM_DA_OFFSET(addr))]; - - if (pci_byteswap) - val = (val << 24) | ((val & 0x0000ff00) << 8) | - ((val & 0x00ff0000) >> 8) | (val >> 24); - -#ifdef DEBUGIO - printk(KERN_DEBUG "=%08x\n", val); -#endif - return(val); -} - -/*****************************************************************************/ - -void pci_outsb(void *addr, void *buf, int len) -{ - volatile unsigned long *rp; - volatile unsigned char *bp; - unsigned char *dp = (unsigned char *) buf; - unsigned int a = (unsigned int) addr; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_outsb(addr=%x,buf=%x,len=%d)\n", (int)addr, (int)buf, len); -#endif - - rp = (volatile unsigned long *) COMEM_BASE; - rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IOWR | COMEM_DA_ADDR(a); - - a = (a & ~0x3) + (~a & 0x03); - bp = (volatile unsigned char *) - (COMEM_BASE + COMEM_PCIBUS + COMEM_DA_OFFSET(a)); - - while (len--) - *bp = *dp++; -} - -/*****************************************************************************/ - -void pci_outsw(void *addr, void *buf, int len) -{ - volatile unsigned long *rp; - volatile unsigned short *wp; - unsigned short w, *dp = (unsigned short *) buf; - unsigned int a = (unsigned int) addr; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_outsw(addr=%x,buf=%x,len=%d)\n", (int)addr, (int)buf, len); -#endif - - rp = (volatile unsigned long *) COMEM_BASE; - rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IOWR | COMEM_DA_ADDR(a); - - a = (a & ~0x3) + (~a & 0x2); - wp = (volatile unsigned short *) - (COMEM_BASE + COMEM_PCIBUS + COMEM_DA_OFFSET(a)); - - while (len--) { - w = *dp++; - if (pci_byteswap) - w = ((w & 0xff) << 8) | ((w >> 8) & 0xff); - *wp = w; - } -} - -/*****************************************************************************/ - -void pci_outsl(void *addr, void *buf, int len) -{ - volatile unsigned long *rp; - volatile unsigned long *lp; - unsigned long l, *dp = (unsigned long *) buf; - unsigned int a = (unsigned int) addr; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_outsl(addr=%x,buf=%x,len=%d)\n", (int)addr, (int)buf, len); -#endif - - rp = (volatile unsigned long *) COMEM_BASE; - rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IOWR | COMEM_DA_ADDR(a); - - lp = (volatile unsigned long *) - (COMEM_BASE + COMEM_PCIBUS + COMEM_DA_OFFSET(a)); - - while (len--) { - l = *dp++; - if (pci_byteswap) - l = (l << 24) | ((l & 0x0000ff00) << 8) | - ((l & 0x00ff0000) >> 8) | (l >> 24); - *lp = l; - } -} - -/*****************************************************************************/ - -void pci_insb(void *addr, void *buf, int len) -{ - volatile unsigned long *rp; - volatile unsigned char *bp; - unsigned char *dp = (unsigned char *) buf; - unsigned int a = (unsigned int) addr; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_insb(addr=%x,buf=%x,len=%d)\n", (int)addr, (int)buf, len); -#endif - - rp = (volatile unsigned long *) COMEM_BASE; - rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IORD | COMEM_DA_ADDR(a); - - a = (a & ~0x3) + (~a & 0x03); - bp = (volatile unsigned char *) - (COMEM_BASE + COMEM_PCIBUS + COMEM_DA_OFFSET(a)); - - while (len--) - *dp++ = *bp; -} - -/*****************************************************************************/ - -void pci_insw(void *addr, void *buf, int len) -{ - volatile unsigned long *rp; - volatile unsigned short *wp; - unsigned short w, *dp = (unsigned short *) buf; - unsigned int a = (unsigned int) addr; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_insw(addr=%x,buf=%x,len=%d)\n", (int)addr, (int)buf, len); -#endif - - rp = (volatile unsigned long *) COMEM_BASE; - rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IORD | COMEM_DA_ADDR(a); - - a = (a & ~0x3) + (~a & 0x2); - wp = (volatile unsigned short *) - (COMEM_BASE + COMEM_PCIBUS + COMEM_DA_OFFSET(a)); - - while (len--) { - w = *wp; - if (pci_byteswap) - w = ((w & 0xff) << 8) | ((w >> 8) & 0xff); - *dp++ = w; - } -} - -/*****************************************************************************/ - -void pci_insl(void *addr, void *buf, int len) -{ - volatile unsigned long *rp; - volatile unsigned long *lp; - unsigned long l, *dp = (unsigned long *) buf; - unsigned int a = (unsigned int) addr; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_insl(addr=%x,buf=%x,len=%d)\n", (int)addr, (int)buf, len); -#endif - - rp = (volatile unsigned long *) COMEM_BASE; - rp[LREG(COMEM_DAHBASE)] = COMEM_DA_IORD | COMEM_DA_ADDR(a); - - lp = (volatile unsigned long *) - (COMEM_BASE + COMEM_PCIBUS + COMEM_DA_OFFSET(a)); - - while (len--) { - l = *lp; - if (pci_byteswap) - l = (l << 24) | ((l & 0x0000ff00) << 8) | - ((l & 0x00ff0000) >> 8) | (l >> 24); - *dp++ = l; - } -} - -/*****************************************************************************/ - -struct pci_localirqlist { - void (*handler)(int, void *, struct pt_regs *); - const char *device; - void *dev_id; -}; - -struct pci_localirqlist pci_irqlist[COMEM_MAXPCI]; - -/*****************************************************************************/ - -int pci_request_irq(unsigned int irq, - void (*handler)(int, void *, struct pt_regs *), - unsigned long flags, const char *device, void *dev_id) -{ - int i; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_request_irq(irq=%d,handler=%x,flags=%x,device=%s," - "dev_id=%x)\n", irq, (int) handler, (int) flags, device, - (int) dev_id); -#endif - - /* Check if this interrupt handler is already lodged */ - for (i = 0; (i < COMEM_MAXPCI); i++) { - if (pci_irqlist[i].handler == handler) - return(0); - } - - /* Find a free spot to put this handler */ - for (i = 0; (i < COMEM_MAXPCI); i++) { - if (pci_irqlist[i].handler == 0) { - pci_irqlist[i].handler = handler; - pci_irqlist[i].device = device; - pci_irqlist[i].dev_id = dev_id; - return(0); - } - } - - /* Couldn't fit?? */ - return(1); -} - -/*****************************************************************************/ - -void pci_free_irq(unsigned int irq, void *dev_id) -{ - int i; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_free_irq(irq=%d,dev_id=%x)\n", irq, (int) dev_id); -#endif - - if (dev_id == (void *) NULL) - return; - - /* Check if this interrupt handler is lodged */ - for (i = 0; (i < COMEM_MAXPCI); i++) { - if (pci_irqlist[i].dev_id == dev_id) { - pci_irqlist[i].handler = NULL; - pci_irqlist[i].device = NULL; - pci_irqlist[i].dev_id = NULL; - break; - } - } -} - -/*****************************************************************************/ - -void pci_interrupt(int irq, void *id, struct pt_regs *fp) -{ - int i; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_interrupt(irq=%d,id=%x,fp=%x)\n", irq, (int) id, (int) fp); -#endif - - for (i = 0; (i < COMEM_MAXPCI); i++) { - if (pci_irqlist[i].handler) - (*pci_irqlist[i].handler)(irq,pci_irqlist[i].dev_id,fp); - } -} - -/*****************************************************************************/ - -/* - * The shared memory region is broken up into contiguous 512 byte - * regions for easy allocation... This is not an optimal solution - * but it makes allocation and freeing regions really easy. - */ - -#define PCI_MEMSLOTSIZE 512 -#define PCI_MEMSLOTS (COMEM_SHMEMSIZE / PCI_MEMSLOTSIZE) - -char pci_shmemmap[PCI_MEMSLOTS]; - - -void *pci_bmalloc(int size) -{ - int i, j, nrslots; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_bmalloc(size=%d)\n", size); -#endif - - if (size <= 0) - return((void *) NULL); - - nrslots = (size - 1) / PCI_MEMSLOTSIZE; - - for (i = 0; (i < (PCI_MEMSLOTS-nrslots)); i++) { - if (pci_shmemmap[i] == 0) { - for (j = i+1; (j < (i+nrslots)); j++) { - if (pci_shmemmap[j]) - goto restart; - } - - for (j = i; (j <= i+nrslots); j++) - pci_shmemmap[j] = 1; - break; - } -restart: - } - - return((void *) (COMEM_BASE + COMEM_SHMEM + (i * PCI_MEMSLOTSIZE))); -} - -/*****************************************************************************/ - -void pci_bmfree(void *mp, int size) -{ - int i, j, nrslots; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_bmfree(mp=%x,size=%d)\n", (int) mp, size); -#endif - - nrslots = size / PCI_MEMSLOTSIZE; - i = (((unsigned long) mp) - (COMEM_BASE + COMEM_SHMEM)) / - PCI_MEMSLOTSIZE; - - for (j = i; (j < (i+nrslots)); j++) - pci_shmemmap[j] = 0; -} - -/*****************************************************************************/ - -unsigned long pci_virt_to_bus(volatile void *address) -{ - unsigned long l; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_virt_to_bus(address=%x)", (int) address); -#endif - - l = ((unsigned long) address) - COMEM_BASE; -#ifdef DEBUGIO - printk(KERN_DEBUG "=%x\n", (int) (l+pci_shmemaddr)); -#endif - return(l + pci_shmemaddr); -} - -/*****************************************************************************/ - -void *pci_bus_to_virt(unsigned long address) -{ - unsigned long l; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_bus_to_virt(address=%x)", (int) address); -#endif - - l = address - pci_shmemaddr; -#ifdef DEBUGIO - printk(KERN_DEBUG "=%x\n", (int) (address + COMEM_BASE)); -#endif - return((void *) (address + COMEM_BASE)); -} - -/*****************************************************************************/ - -void pci_bmcpyto(void *dst, void *src, int len) -{ - unsigned long *dp, *sp, val; - unsigned char *dcp, *scp; - int i, j; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_bmcpyto(dst=%x,src=%x,len=%d)\n", (int)dst, (int)src, len); -#endif - - dp = (unsigned long *) dst; - sp = (unsigned long *) src; - i = len >> 2; - -#if 0 - printk(KERN_INFO "DATA:"); - scp = (unsigned char *) sp; - for (i = 0; (i < len); i++) { - if ((i % 16) == 0) printk(KERN_INFO "\n%04x: ", i); - printk(KERN_INFO "%02x ", *scp++); - } - printk(KERN_INFO "\n"); -#endif - - for (j = 0; (i >= 0); i--, j++) { - val = *sp++; - val = (val << 24) | ((val & 0x0000ff00) << 8) | - ((val & 0x00ff0000) >> 8) | (val >> 24); - *dp++ = val; - } - - if (len & 0x3) { - dcp = (unsigned char *) dp; - scp = ((unsigned char *) sp) + 3; - for (i = 0; (i < (len & 0x3)); i++) - *dcp++ = *scp--; - } -} - -/*****************************************************************************/ - -void pci_bmcpyfrom(void *dst, void *src, int len) -{ - unsigned long *dp, *sp, val; - unsigned char *dcp, *scp; - int i; - -#ifdef DEBUGIO - printk(KERN_DEBUG "pci_bmcpyfrom(dst=%x,src=%x,len=%d)\n",(int)dst,(int)src,len); -#endif - - dp = (unsigned long *) dst; - sp = (unsigned long *) src; - i = len >> 2; - - for (; (i >= 0); i--) { - val = *sp++; - val = (val << 24) | ((val & 0x0000ff00) << 8) | - ((val & 0x00ff0000) >> 8) | (val >> 24); - *dp++ = val; - } - - if (len & 0x3) { - dcp = ((unsigned char *) dp) + 3; - scp = (unsigned char *) sp; - for (i = 0; (i < (len & 0x3)); i++) - *dcp++ = *scp--; - } - -#if 0 - printk(KERN_INFO "DATA:"); - dcp = (unsigned char *) dst; - for (i = 0; (i < len); i++) { - if ((i % 16) == 0) printk(KERN_INFO "\n%04x: ", i); - printk(KERN_INFO "%02x ", *dcp++); - } - printk(KERN_INFO "\n"); -#endif -} - -/*****************************************************************************/ - -void *pci_alloc_consistent(struct pci_dev *dev, size_t size, dma_addr_t *dma_addr) -{ - void *mp; - if ((mp = pci_bmalloc(size)) != NULL) { - dma_addr = mp - (COMEM_BASE + COMEM_SHMEM); - return(mp); - } - *dma_addr = (dma_addr_t) NULL; - return(NULL); -} - -/*****************************************************************************/ - -void pci_free_consistent(struct pci_dev *dev, size_t size, void *cpu_addr, dma_addr_t dma_addr) -{ - pci_bmfree(cpu_addr, size); -} - -/*****************************************************************************/ diff --git a/arch/m68knommu/kernel/signal.c b/arch/m68knommu/kernel/signal.c index bbfcae9e52b..5ab6a04af14 100644 --- a/arch/m68knommu/kernel/signal.c +++ b/arch/m68knommu/kernel/signal.c @@ -279,6 +279,9 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext *usc, void *fp, struct sigcontext context; int err = 0; + /* Always make any pending restarted system calls return -EINTR */ + current_thread_info()->restart_block.fn = do_no_restart_syscall; + /* get previous context */ if (copy_from_user(&context, usc, sizeof(context))) goto badframe; @@ -316,6 +319,9 @@ rt_restore_ucontext(struct pt_regs *regs, struct switch_stack *sw, unsigned long usp; int err; + /* Always make any pending restarted system calls return -EINTR */ + current_thread_info()->restart_block.fn = do_no_restart_syscall; + err = __get_user(temp, &uc->uc_mcontext.version); if (temp != MCONTEXT_VERSION) goto badframe; @@ -692,6 +698,15 @@ handle_restart(struct pt_regs *regs, struct k_sigaction *ka, int has_handler) regs->d0 = -EINTR; break; + case -ERESTART_RESTARTBLOCK: + if (!has_handler) { + regs->d0 = __NR_restart_syscall; + regs->pc -= 2; + break; + } + regs->d0 = -EINTR; + break; + case -ERESTARTSYS: if (has_handler && !(ka->sa.sa_flags & SA_RESTART)) { regs->d0 = -EINTR; diff --git a/arch/m68knommu/kernel/syscalltable.S b/arch/m68knommu/kernel/syscalltable.S index 5c3e3f62194..1017e76f371 100644 --- a/arch/m68knommu/kernel/syscalltable.S +++ b/arch/m68knommu/kernel/syscalltable.S @@ -18,7 +18,7 @@ .text ALIGN ENTRY(sys_call_table) - .long sys_ni_syscall /* 0 - old "setup()" system call*/ + .long sys_restart_syscall /* 0 - old "setup()" system call */ .long sys_exit .long sys_fork .long sys_read diff --git a/arch/m68knommu/platform/5307/config.c b/arch/m68knommu/platform/5307/config.c index 11cff6625dc..724faf05852 100644 --- a/arch/m68knommu/platform/5307/config.c +++ b/arch/m68knommu/platform/5307/config.c @@ -123,7 +123,7 @@ void __init config_BSP(char *commandp, int size) { mcf_setimr(MCFSIM_IMR_MASKALL); -#if defined(CONFIG_NETtel) || defined(CONFIG_eLIA) || \ +#if defined(CONFIG_NETtel) || \ defined(CONFIG_SECUREEDGEMP3) || defined(CONFIG_CLEOPATRA) /* Copy command line from FLASH to local buffer... */ memcpy(commandp, (char *) 0xf0004000, size); diff --git a/arch/m68knommu/platform/532x/config.c b/arch/m68knommu/platform/532x/config.c index 4f44b632045..a347623d6ee 100644 --- a/arch/m68knommu/platform/532x/config.c +++ b/arch/m68knommu/platform/532x/config.c @@ -41,15 +41,15 @@ extern unsigned int mcf_timerlevel; static struct mcf_platform_uart m532x_uart_platform[] = { { - .mapbase = MCF_MBAR + MCFUART_BASE1, + .mapbase = MCFUART_BASE1, .irq = MCFINT_VECBASE + MCFINT_UART0, }, { - .mapbase = MCF_MBAR + MCFUART_BASE2, + .mapbase = MCFUART_BASE2, .irq = MCFINT_VECBASE + MCFINT_UART1, }, { - .mapbase = MCF_MBAR + MCFUART_BASE3, + .mapbase = MCFUART_BASE3, .irq = MCFINT_VECBASE + MCFINT_UART2, }, { }, @@ -108,7 +108,7 @@ void mcf_settimericr(unsigned int timer, unsigned int level) default: irq = 32; icr = MCFSIM_ICR_TIMER1; break; } - icrp = (volatile unsigned char *) (MCF_MBAR + icr); + icrp = (volatile unsigned char *) (icr); *icrp = level; mcf_enable_irq0(irq); } diff --git a/arch/m68knommu/platform/coldfire/entry.S b/arch/m68knommu/platform/coldfire/entry.S index 1e3c0dcbd7a..3b471c0da24 100644 --- a/arch/m68knommu/platform/coldfire/entry.S +++ b/arch/m68knommu/platform/coldfire/entry.S @@ -215,19 +215,8 @@ ENTRY(fasthandler) RESTORE_LOCAL ENTRY(ret_from_interrupt) - moveb %sp@(PT_SR),%d0 - andl #0x7,%d0 - jeq 1f - - RESTORE_ALL - -1: - /* check if we need to do software interrupts */ - movel irq_stat+CPUSTAT_SOFTIRQ_PENDING,%d0 - jeq ret_from_exception - - pea ret_from_exception - jmp do_softirq + /* the fasthandler is confusing me, haven't seen any user */ + jmp ret_from_exception /* * Beware - when entering resume, prev (the current task) is diff --git a/arch/mips/configs/bigsur_defconfig b/arch/mips/configs/bigsur_defconfig index a3bbbf067a3..783da855a2e 100644 --- a/arch/mips/configs/bigsur_defconfig +++ b/arch/mips/configs/bigsur_defconfig @@ -959,7 +959,7 @@ CONFIG_I2C_SIBYTE=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_SENSORS_EEPROM=y +CONFIG_EEPROM_LEGACY=y CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set CONFIG_SENSORS_PCF8591=y diff --git a/arch/mips/configs/emma2rh_defconfig b/arch/mips/configs/emma2rh_defconfig index 634bb4eaf13..fea9bc9865a 100644 --- a/arch/mips/configs/emma2rh_defconfig +++ b/arch/mips/configs/emma2rh_defconfig @@ -996,7 +996,7 @@ CONFIG_I2C_CHARDEV=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/mips/configs/fulong_defconfig b/arch/mips/configs/fulong_defconfig index b6698a232ae..786a9bc9a69 100644 --- a/arch/mips/configs/fulong_defconfig +++ b/arch/mips/configs/fulong_defconfig @@ -1006,8 +1006,8 @@ CONFIG_I2C_VIAPRO=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/mips/configs/msp71xx_defconfig b/arch/mips/configs/msp71xx_defconfig index dd13db4d0fb..84d6491b3d4 100644 --- a/arch/mips/configs/msp71xx_defconfig +++ b/arch/mips/configs/msp71xx_defconfig @@ -929,7 +929,7 @@ CONFIG_I2C_PMCMSP=y # # CONFIG_SENSORS_DS1337 is not set # CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set CONFIG_PMCTWILED=y # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/mips/configs/mtx1_defconfig b/arch/mips/configs/mtx1_defconfig index db9272677aa..8426d3b9501 100644 --- a/arch/mips/configs/mtx1_defconfig +++ b/arch/mips/configs/mtx1_defconfig @@ -1845,7 +1845,7 @@ CONFIG_I2C_VOODOO3=m CONFIG_SENSORS_DS1337=m CONFIG_SENSORS_DS1374=m # CONFIG_DS1682 is not set -CONFIG_SENSORS_EEPROM=m +CONFIG_EEPROM_LEGACY=m CONFIG_SENSORS_PCF8574=m CONFIG_SENSORS_PCA9539=m CONFIG_SENSORS_PCF8591=m @@ -1872,7 +1872,7 @@ CONFIG_SPI_BUTTERFLY=m # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_W1=m diff --git a/arch/mips/configs/pnx8335-stb225_defconfig b/arch/mips/configs/pnx8335-stb225_defconfig index d9536522cff..2728caa6c2f 100644 --- a/arch/mips/configs/pnx8335-stb225_defconfig +++ b/arch/mips/configs/pnx8335-stb225_defconfig @@ -640,8 +640,8 @@ CONFIG_I2C_CHARDEV=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/mips/configs/rbtx49xx_defconfig b/arch/mips/configs/rbtx49xx_defconfig index c7c0864b8ce..83d5c58662c 100644 --- a/arch/mips/configs/rbtx49xx_defconfig +++ b/arch/mips/configs/rbtx49xx_defconfig @@ -522,7 +522,7 @@ CONFIG_SPI_TXX9=y # # SPI Protocol Masters # -CONFIG_SPI_AT25=y +CONFIG_EEPROM_AT25=y # CONFIG_SPI_TLE62X0 is not set CONFIG_HAVE_GPIO_LIB=y diff --git a/arch/mips/include/asm/irq.h b/arch/mips/include/asm/irq.h index abc62aa744a..3214ade02d1 100644 --- a/arch/mips/include/asm/irq.h +++ b/arch/mips/include/asm/irq.h @@ -66,7 +66,7 @@ extern void smtc_forward_irq(unsigned int irq); */ #define IRQ_AFFINITY_HOOK(irq) \ do { \ - if (!cpu_isset(smp_processor_id(), irq_desc[irq].affinity)) { \ + if (!cpumask_test_cpu(smp_processor_id(), irq_desc[irq].affinity)) {\ smtc_forward_irq(irq); \ irq_exit(); \ return; \ diff --git a/arch/mips/kernel/irq-gic.c b/arch/mips/kernel/irq-gic.c index 494a49a317e..87deb8f6c45 100644 --- a/arch/mips/kernel/irq-gic.c +++ b/arch/mips/kernel/irq-gic.c @@ -187,7 +187,7 @@ static void gic_set_affinity(unsigned int irq, const struct cpumask *cpumask) set_bit(irq, pcpu_masks[first_cpu(tmp)].pcpu_mask); } - irq_desc[irq].affinity = *cpumask; + cpumask_copy(irq_desc[irq].affinity, cpumask); spin_unlock_irqrestore(&gic_lock, flags); } diff --git a/arch/mips/kernel/smtc.c b/arch/mips/kernel/smtc.c index b6cca01ff82..5f5af7d4c89 100644 --- a/arch/mips/kernel/smtc.c +++ b/arch/mips/kernel/smtc.c @@ -686,7 +686,7 @@ void smtc_forward_irq(unsigned int irq) * and efficiency, we just pick the easiest one to find. */ - target = first_cpu(irq_desc[irq].affinity); + target = cpumask_first(irq_desc[irq].affinity); /* * We depend on the platform code to have correctly processed @@ -921,11 +921,13 @@ void ipi_decode(struct smtc_ipi *pipi) struct clock_event_device *cd; void *arg_copy = pipi->arg; int type_copy = pipi->type; + int irq = MIPS_CPU_IRQ_BASE + 1; + smtc_ipi_nq(&freeIPIq, pipi); switch (type_copy) { case SMTC_CLOCK_TICK: irq_enter(); - kstat_this_cpu.irqs[MIPS_CPU_IRQ_BASE + 1]++; + kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); cd = &per_cpu(mips_clockevent_device, cpu); cd->event_handler(cd); irq_exit(); diff --git a/arch/mips/mti-malta/malta-smtc.c b/arch/mips/mti-malta/malta-smtc.c index aabd7274507..5ba31888fef 100644 --- a/arch/mips/mti-malta/malta-smtc.c +++ b/arch/mips/mti-malta/malta-smtc.c @@ -116,7 +116,7 @@ struct plat_smp_ops msmtc_smp_ops = { void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity) { - cpumask_t tmask = *affinity; + cpumask_t tmask; int cpu = 0; void smtc_set_irq_affinity(unsigned int irq, cpumask_t aff); @@ -139,11 +139,12 @@ void plat_set_irq_affinity(unsigned int irq, const struct cpumask *affinity) * be made to forward to an offline "CPU". */ + cpumask_copy(&tmask, affinity); for_each_cpu(cpu, affinity) { if ((cpu_data[cpu].vpe_id != 0) || !cpu_online(cpu)) cpu_clear(cpu, tmask); } - irq_desc[irq].affinity = tmask; + cpumask_copy(irq_desc[irq].affinity, &tmask); if (cpus_empty(tmask)) /* diff --git a/arch/mips/sgi-ip22/ip22-int.c b/arch/mips/sgi-ip22/ip22-int.c index f8b18af141a..0ecd5fe9486 100644 --- a/arch/mips/sgi-ip22/ip22-int.c +++ b/arch/mips/sgi-ip22/ip22-int.c @@ -155,7 +155,7 @@ static void indy_buserror_irq(void) int irq = SGI_BUSERR_IRQ; irq_enter(); - kstat_this_cpu.irqs[irq]++; + kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); ip22_be_interrupt(irq); irq_exit(); } diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c index 3dcb27ec0c5..c8f7d2328b2 100644 --- a/arch/mips/sgi-ip22/ip22-time.c +++ b/arch/mips/sgi-ip22/ip22-time.c @@ -122,7 +122,7 @@ void indy_8254timer_irq(void) char c; irq_enter(); - kstat_this_cpu.irqs[irq]++; + kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); printk(KERN_ALERT "Oops, got 8254 interrupt.\n"); ArcRead(0, &c, 1, &cnt); ArcEnterInteractiveMode(); diff --git a/arch/mips/sibyte/bcm1480/smp.c b/arch/mips/sibyte/bcm1480/smp.c index dddfda8e829..314691648c9 100644 --- a/arch/mips/sibyte/bcm1480/smp.c +++ b/arch/mips/sibyte/bcm1480/smp.c @@ -178,9 +178,10 @@ struct plat_smp_ops bcm1480_smp_ops = { void bcm1480_mailbox_interrupt(void) { int cpu = smp_processor_id(); + int irq = K_BCM1480_INT_MBOX_0_0; unsigned int action; - kstat_this_cpu.irqs[K_BCM1480_INT_MBOX_0_0]++; + kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); /* Load the mailbox register to figure out what we're supposed to do */ action = (__raw_readq(mailbox_0_regs[cpu]) >> 48) & 0xffff; diff --git a/arch/mips/sibyte/sb1250/smp.c b/arch/mips/sibyte/sb1250/smp.c index 5950a288a7d..cad14003b84 100644 --- a/arch/mips/sibyte/sb1250/smp.c +++ b/arch/mips/sibyte/sb1250/smp.c @@ -166,9 +166,10 @@ struct plat_smp_ops sb_smp_ops = { void sb1250_mailbox_interrupt(void) { int cpu = smp_processor_id(); + int irq = K_INT_MBOX_0; unsigned int action; - kstat_this_cpu.irqs[K_INT_MBOX_0]++; + kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); /* Load the mailbox register to figure out what we're supposed to do */ action = (____raw_readq(mailbox_regs[cpu]) >> 48) & 0xffff; diff --git a/arch/mn10300/kernel/mn10300-watchdog.c b/arch/mn10300/kernel/mn10300-watchdog.c index 10811e981d2..2e370d88a87 100644 --- a/arch/mn10300/kernel/mn10300-watchdog.c +++ b/arch/mn10300/kernel/mn10300-watchdog.c @@ -130,6 +130,7 @@ void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep) * the stack NMI-atomically, it's safe to use smp_processor_id(). */ int sum, cpu = smp_processor_id(); + int irq = NMIIRQ; u8 wdt, tmp; wdt = WDCTR & ~WDCTR_WDCNE; @@ -138,7 +139,7 @@ void watchdog_interrupt(struct pt_regs *regs, enum exception_code excep) NMICR = NMICR_WDIF; nmi_count(cpu)++; - kstat_this_cpu.irqs[NMIIRQ]++; + kstat_incr_irqs_this_cpu(irq, irq_to_desc(irq)); sum = irq_stat[cpu].__irq_count; if (last_irq_sums[cpu] == sum) { diff --git a/arch/parisc/kernel/irq.c b/arch/parisc/kernel/irq.c index ac2c822928c..49482806863 100644 --- a/arch/parisc/kernel/irq.c +++ b/arch/parisc/kernel/irq.c @@ -120,7 +120,7 @@ int cpu_check_affinity(unsigned int irq, cpumask_t *dest) if (CHECK_IRQ_PER_CPU(irq)) { /* Bad linux design decision. The mask has already * been set; we must reset it */ - irq_desc[irq].affinity = CPU_MASK_ALL; + cpumask_setall(irq_desc[irq].affinity); return -EINVAL; } @@ -136,7 +136,7 @@ static void cpu_set_affinity_irq(unsigned int irq, const struct cpumask *dest) if (cpu_check_affinity(irq, dest)) return; - irq_desc[irq].affinity = *dest; + cpumask_copy(irq_desc[irq].affinity, dest); } #endif @@ -295,7 +295,7 @@ int txn_alloc_irq(unsigned int bits_wide) unsigned long txn_affinity_addr(unsigned int irq, int cpu) { #ifdef CONFIG_SMP - irq_desc[irq].affinity = cpumask_of_cpu(cpu); + cpumask_copy(irq_desc[irq].affinity, cpumask_of(cpu)); #endif return per_cpu(cpu_data, cpu).txn_addr; @@ -352,7 +352,7 @@ void do_cpu_irq_mask(struct pt_regs *regs) irq = eirr_to_irq(eirr_val); #ifdef CONFIG_SMP - dest = irq_desc[irq].affinity; + cpumask_copy(&dest, irq_desc[irq].affinity); if (CHECK_IRQ_PER_CPU(irq_desc[irq].status) && !cpu_isset(smp_processor_id(), dest)) { int cpu = first_cpu(dest); diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index e39b73bc0ff..74cc312c347 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -876,10 +876,6 @@ source "drivers/Kconfig" source "fs/Kconfig" -# XXX source "arch/ppc/8xx_io/Kconfig" - -# XXX source "arch/ppc/8260_io/Kconfig" - source "arch/powerpc/sysdev/qe_lib/Kconfig" source "lib/Kconfig" diff --git a/arch/powerpc/boot/cuboot-warp.c b/arch/powerpc/boot/cuboot-warp.c index 21780210057..806df693fea 100644 --- a/arch/powerpc/boot/cuboot-warp.c +++ b/arch/powerpc/boot/cuboot-warp.c @@ -18,57 +18,14 @@ static bd_t bd; -static void warp_fixup_one_nor(u32 from, u32 to) -{ - void *devp; - char name[50]; - u32 v[2]; - - sprintf(name, "/plb/opb/ebc/nor_flash@0,0/partition@%x", from); - - devp = finddevice(name); - if (!devp) - return; - - if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) { - v[0] = to; - setprop(devp, "reg", v, sizeof(v)); - - printf("NOR 64M fixup %x -> %x\r\n", from, to); - } -} - - static void warp_fixups(void) { ibm440ep_fixup_clocks(66000000, 11059200, 50000000); ibm4xx_sdram_fixup_memsize(); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); dt_fixup_mac_address_by_alias("ethernet0", bd.bi_enetaddr); - - /* Fixup for 64M flash on Rev A boards. */ - if (bd.bi_flashsize == 0x4000000) { - void *devp; - u32 v[3]; - - devp = finddevice("/plb/opb/ebc/nor_flash@0,0"); - if (!devp) - return; - - /* Fixup the size */ - if (getprop(devp, "reg", v, sizeof(v)) == sizeof(v)) { - v[2] = bd.bi_flashsize; - setprop(devp, "reg", v, sizeof(v)); - } - - /* Fixup parition offsets */ - warp_fixup_one_nor(0x300000, 0x3f00000); - warp_fixup_one_nor(0x340000, 0x3f40000); - warp_fixup_one_nor(0x380000, 0x3f80000); - } } - void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, unsigned long r6, unsigned long r7) { diff --git a/arch/powerpc/boot/dts/haleakala.dts b/arch/powerpc/boot/dts/haleakala.dts index 513bc43a71a..5b2a4947bf8 100644 --- a/arch/powerpc/boot/dts/haleakala.dts +++ b/arch/powerpc/boot/dts/haleakala.dts @@ -89,8 +89,11 @@ clock-frequency = <0>; /* Filled in by U-Boot */ SDRAM0: memory-controller { - compatible = "ibm,sdram-405exr"; + compatible = "ibm,sdram-405exr", "ibm,sdram-4xx-ddr2"; dcr-reg = <0x010 0x002>; + interrupt-parent = <&UIC2>; + interrupts = <0x5 0x4 /* ECC DED Error */ + 0x6 0x4>; /* ECC SEC Error */ }; MAL0: mcmal { diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index dececc4b5ff..2804444812e 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -90,8 +90,11 @@ clock-frequency = <0>; /* Filled in by U-Boot */ SDRAM0: memory-controller { - compatible = "ibm,sdram-405ex"; + compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; dcr-reg = <0x010 0x002>; + interrupt-parent = <&UIC2>; + interrupts = <0x5 0x4 /* ECC DED Error */ + 0x6 0x4>; /* ECC SEC Error */ }; MAL0: mcmal { diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts index 945508c7e7d..ffc246e7267 100644 --- a/arch/powerpc/boot/dts/makalu.dts +++ b/arch/powerpc/boot/dts/makalu.dts @@ -90,8 +90,11 @@ clock-frequency = <0>; /* Filled in by U-Boot */ SDRAM0: memory-controller { - compatible = "ibm,sdram-405ex"; + compatible = "ibm,sdram-405ex", "ibm,sdram-4xx-ddr2"; dcr-reg = <0x010 0x002>; + interrupt-parent = <&UIC2>; + interrupts = <0x5 0x4 /* ECC DED Error */ + 0x6 0x4 /* ECC SEC Error */ >; }; MAL0: mcmal { diff --git a/arch/powerpc/boot/dts/mpc8313erdb.dts b/arch/powerpc/boot/dts/mpc8313erdb.dts index d4df8b6857a..909a89cab9a 100644 --- a/arch/powerpc/boot/dts/mpc8313erdb.dts +++ b/arch/powerpc/boot/dts/mpc8313erdb.dts @@ -185,7 +185,7 @@ cell-index = <0>; device_type = "network"; model = "eTSEC"; - compatible = "gianfar", "simple-bus"; + compatible = "gianfar"; reg = <0x24000 0x1000>; local-mac-address = [ 00 00 00 00 00 00 ]; interrupts = <37 0x8 36 0x8 35 0x8>; diff --git a/arch/powerpc/boot/dts/mpc8572ds.dts b/arch/powerpc/boot/dts/mpc8572ds.dts index 3dcc001b8ed..359c3b72742 100644 --- a/arch/powerpc/boot/dts/mpc8572ds.dts +++ b/arch/powerpc/boot/dts/mpc8572ds.dts @@ -89,7 +89,7 @@ ramdisk@0 { reg = <0x0 0x03000000>; - readl-only; + read-only; }; diagnostic@3000000 { diff --git a/arch/powerpc/boot/dts/warp.dts b/arch/powerpc/boot/dts/warp.dts index f4e4ba69eef..7e183ff9a31 100644 --- a/arch/powerpc/boot/dts/warp.dts +++ b/arch/powerpc/boot/dts/warp.dts @@ -149,12 +149,17 @@ reg = <0x00000002 0x00004000 0x00000A00>; }; - nor_flash@0,0 { + nor@0,0 { compatible = "amd,s29gl032a", "cfi-flash"; bank-width = <2>; reg = <0x00000000 0x00000000 0x00400000>; #address-cells = <1>; #size-cells = <1>; + + partition@0 { + label = "splash"; + reg = <0x00000000 0x00020000>; + }; partition@300000 { label = "fpga"; reg = <0x0300000 0x00040000>; @@ -168,6 +173,41 @@ reg = <0x0380000 0x00080000>; }; }; + + ndfc@1,0 { + compatible = "ibm,ndfc"; + reg = <0x00000001 0x00000000 0x00002000>; + ccr = <0x00001000>; + bank-settings = <0x80002222>; + #address-cells = <1>; + #size-cells = <1>; + + nand { + #address-cells = <1>; + #size-cells = <1>; + + partition@0 { + label = "kernel"; + reg = <0x00000000 0x00200000>; + }; + partition@200000 { + label = "root"; + reg = <0x00200000 0x03E00000>; + }; + partition@40000000 { + label = "persistent"; + reg = <0x04000000 0x04000000>; + }; + partition@80000000 { + label = "persistent1"; + reg = <0x08000000 0x04000000>; + }; + partition@C0000000 { + label = "persistent2"; + reg = <0x0C000000 0x04000000>; + }; + }; + }; }; UART0: serial@ef600300 { diff --git a/arch/powerpc/configs/40x/acadia_defconfig b/arch/powerpc/configs/40x/acadia_defconfig index 25572cc837c..a32ec8d323a 100644 --- a/arch/powerpc/configs/40x/acadia_defconfig +++ b/arch/powerpc/configs/40x/acadia_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 08:49:18 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:17:46 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_40x=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_4xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -40,7 +41,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,12 +72,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -89,6 +90,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -111,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,7 +123,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -130,11 +130,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,6 +149,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -182,6 +184,7 @@ CONFIG_405EZ=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -205,6 +208,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -219,12 +223,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -248,6 +254,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -272,6 +279,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -322,6 +330,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -334,6 +343,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -359,6 +369,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -431,6 +442,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -524,6 +541,10 @@ CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -576,9 +597,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -597,11 +621,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -611,7 +635,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -670,7 +694,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -704,10 +730,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -717,6 +740,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -757,6 +781,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -807,6 +832,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -815,18 +841,24 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -853,11 +885,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/40x/ep405_defconfig b/arch/powerpc/configs/40x/ep405_defconfig index b80ba7aa312..4e9d85f39da 100644 --- a/arch/powerpc/configs/40x/ep405_defconfig +++ b/arch/powerpc/configs/40x/ep405_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 08:49:20 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:17:48 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_40x=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_4xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -40,7 +41,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,12 +72,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -89,6 +90,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -111,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,7 +123,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -130,11 +130,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,6 +149,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -184,6 +186,7 @@ CONFIG_IBM405_ERR51=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -207,6 +210,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -221,12 +225,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -250,6 +256,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -274,6 +281,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -324,6 +332,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -336,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -361,6 +371,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -433,6 +444,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -464,6 +481,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -546,6 +564,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -570,6 +589,10 @@ CONFIG_NETDEV_10000=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -629,9 +652,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -650,11 +676,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -664,7 +690,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -723,6 +749,7 @@ CONFIG_USB_MON=y # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -748,11 +775,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # # CONFIG_USB_LIBUSUAL is not set @@ -791,6 +818,10 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -816,7 +847,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -850,10 +883,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -863,6 +893,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -903,6 +934,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -953,6 +985,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -961,18 +994,24 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -999,11 +1038,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/40x/hcu4_defconfig b/arch/powerpc/configs/40x/hcu4_defconfig index 45dcb824503..8c019d79bf2 100644 --- a/arch/powerpc/configs/40x/hcu4_defconfig +++ b/arch/powerpc/configs/40x/hcu4_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 08:49:22 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:17:50 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_40x=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_4xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -40,7 +41,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,12 +72,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -89,6 +90,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -111,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,7 +123,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -130,11 +130,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,6 +149,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -182,6 +184,7 @@ CONFIG_405GPR=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -205,6 +208,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -219,12 +223,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -248,6 +254,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -272,6 +279,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -322,6 +330,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -334,6 +343,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -359,6 +369,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -431,6 +442,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -461,6 +478,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -543,6 +561,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -565,6 +584,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -617,9 +640,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -639,11 +665,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -653,7 +679,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -712,7 +738,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -746,10 +774,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -759,6 +784,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -799,6 +825,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -849,6 +876,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -857,18 +885,24 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -895,11 +929,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/40x/kilauea_defconfig b/arch/powerpc/configs/40x/kilauea_defconfig index e2f3695d9d0..9917a09bad3 100644 --- a/arch/powerpc/configs/40x/kilauea_defconfig +++ b/arch/powerpc/configs/40x/kilauea_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 08:49:23 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:17:52 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_40x=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_4xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -40,7 +41,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,12 +72,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -89,6 +90,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -111,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,7 +123,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -130,11 +130,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,6 +149,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -182,6 +184,7 @@ CONFIG_405EX=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -205,6 +208,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -219,12 +223,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -248,6 +254,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -272,6 +279,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -322,6 +330,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -334,6 +343,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -359,6 +369,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -431,6 +442,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -524,6 +541,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -576,9 +597,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -597,11 +621,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -611,7 +635,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -670,7 +694,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -704,10 +730,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -717,6 +740,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -757,6 +781,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -807,6 +832,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -815,18 +841,24 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -853,11 +885,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/40x/makalu_defconfig b/arch/powerpc/configs/40x/makalu_defconfig index 413c778ecd7..58bf2ac2e0d 100644 --- a/arch/powerpc/configs/40x/makalu_defconfig +++ b/arch/powerpc/configs/40x/makalu_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 08:49:25 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:17:53 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_40x=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_4xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -40,7 +41,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,12 +72,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -89,6 +90,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -111,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,7 +123,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -130,11 +130,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,6 +149,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -182,6 +184,7 @@ CONFIG_405EX=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -205,6 +208,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -219,12 +223,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -248,6 +254,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -272,6 +279,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -322,6 +330,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -334,6 +343,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -359,6 +369,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -431,6 +442,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -524,6 +541,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -576,9 +597,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -597,11 +621,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -611,7 +635,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -670,7 +694,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -704,10 +730,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -717,6 +740,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -757,6 +781,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -807,6 +832,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -815,18 +841,24 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -853,11 +885,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/40x/virtex_defconfig b/arch/powerpc/configs/40x/virtex_defconfig index 9a9350ded29..b6888384dd7 100644 --- a/arch/powerpc/configs/40x/virtex_defconfig +++ b/arch/powerpc/configs/40x/virtex_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Fri Nov 14 10:49:16 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:17:55 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_40x=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_4xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -41,7 +42,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -74,8 +75,8 @@ CONFIG_POSIX_MQUEUE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -113,7 +114,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -124,7 +124,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -132,11 +131,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -153,6 +150,10 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -188,6 +189,7 @@ CONFIG_IBM405_ERR51=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -205,13 +207,13 @@ CONFIG_HZ=250 # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -226,12 +228,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -256,6 +260,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -280,6 +285,8 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NET_NS is not set +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -423,6 +430,7 @@ CONFIG_IP_NF_MANGLE=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -438,8 +446,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -574,6 +583,10 @@ CONFIG_NETDEV_1000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -674,9 +687,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m # CONFIG_NVRAM is not set @@ -854,7 +870,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -870,6 +885,7 @@ CONFIG_EXT2_FS=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -906,10 +922,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -918,6 +931,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -997,6 +1011,7 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1046,6 +1061,7 @@ CONFIG_DEBUG_INFO=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1055,6 +1071,8 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1064,11 +1082,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1094,6 +1114,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/40x/walnut_defconfig b/arch/powerpc/configs/40x/walnut_defconfig index 5820e0a4fc5..5ab29dddd21 100644 --- a/arch/powerpc/configs/40x/walnut_defconfig +++ b/arch/powerpc/configs/40x/walnut_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 08:49:27 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:17:57 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_40x=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_4xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -40,7 +41,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,12 +72,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -89,6 +90,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -111,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,7 +123,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -130,11 +130,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,6 +149,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -185,6 +187,7 @@ CONFIG_IBM405_ERR51=y # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set CONFIG_OF_RTC=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -208,6 +211,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -222,12 +226,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -251,6 +257,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -275,6 +282,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -325,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -337,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -362,6 +372,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -434,6 +445,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -464,6 +481,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -546,6 +564,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -568,6 +587,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -620,9 +643,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -641,11 +667,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -655,7 +681,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -701,9 +727,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -729,7 +759,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -763,10 +795,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -776,6 +805,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -816,6 +846,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -866,6 +897,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -874,18 +906,24 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -912,11 +950,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/44x/arches_defconfig b/arch/powerpc/configs/44x/arches_defconfig index 082158d591c..1d72b0ac3f2 100644 --- a/arch/powerpc/configs/44x/arches_defconfig +++ b/arch/powerpc/configs/44x/arches_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 09:16:04 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:22:31 2009 # # CONFIG_PPC64 is not set @@ -19,6 +19,7 @@ CONFIG_4xx=y CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -44,7 +45,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,8 +76,8 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -111,7 +112,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,7 +122,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -130,11 +129,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,6 +148,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -188,6 +189,7 @@ CONFIG_460EX=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -212,6 +214,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -226,12 +229,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -255,6 +260,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -279,6 +285,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -329,6 +336,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -341,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -453,6 +462,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -505,9 +518,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -527,11 +543,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -541,7 +557,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -600,7 +616,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -634,10 +652,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -646,6 +661,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -686,6 +702,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -736,6 +753,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -744,18 +762,24 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set diff --git a/arch/powerpc/configs/44x/bamboo_defconfig b/arch/powerpc/configs/44x/bamboo_defconfig index f47c2f3420f..959bdc43a49 100644 --- a/arch/powerpc/configs/44x/bamboo_defconfig +++ b/arch/powerpc/configs/44x/bamboo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 09:16:06 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:22:33 2009 # # CONFIG_PPC64 is not set @@ -19,6 +19,7 @@ CONFIG_4xx=y CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -44,7 +45,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +76,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -115,7 +116,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -126,7 +126,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -134,11 +133,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -155,6 +152,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -193,6 +194,7 @@ CONFIG_IBM440EP_ERR42=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -216,6 +218,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -230,12 +233,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -259,6 +264,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -283,6 +289,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -333,6 +340,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -345,6 +353,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -394,6 +403,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -476,6 +486,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -498,6 +509,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -550,9 +565,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -571,11 +589,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -585,7 +603,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -631,9 +649,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -659,7 +681,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -693,10 +717,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -705,6 +726,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -745,6 +767,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -795,6 +818,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -803,18 +827,24 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -841,11 +871,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/44x/canyonlands_defconfig b/arch/powerpc/configs/44x/canyonlands_defconfig index 0694756ac75..81cdcc4b927 100644 --- a/arch/powerpc/configs/44x/canyonlands_defconfig +++ b/arch/powerpc/configs/44x/canyonlands_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 09:16:08 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:22:35 2009 # # CONFIG_PPC64 is not set @@ -19,6 +19,7 @@ CONFIG_4xx=y CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -44,7 +45,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,8 +76,8 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -111,7 +112,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -122,7 +122,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -130,11 +129,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,6 +148,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -188,6 +189,7 @@ CONFIG_460EX=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -212,6 +214,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -226,12 +229,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -255,6 +260,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -279,6 +285,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -329,6 +336,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -341,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -453,6 +462,10 @@ CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -505,9 +518,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -527,11 +543,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -541,7 +557,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -600,7 +616,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -634,10 +652,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -646,6 +661,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -686,6 +702,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -736,6 +753,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -744,18 +762,24 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set diff --git a/arch/powerpc/configs/44x/ebony_defconfig b/arch/powerpc/configs/44x/ebony_defconfig index c9937578ef7..be64aa644d1 100644 --- a/arch/powerpc/configs/44x/ebony_defconfig +++ b/arch/powerpc/configs/44x/ebony_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 09:16:09 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:22:36 2009 # # CONFIG_PPC64 is not set @@ -18,6 +18,7 @@ CONFIG_4xx=y CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -43,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -74,12 +75,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -92,6 +93,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -114,7 +116,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -125,7 +126,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -133,11 +133,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -154,6 +152,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -192,6 +194,7 @@ CONFIG_440GP=y # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set CONFIG_OF_RTC=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -215,6 +218,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -229,12 +233,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -257,6 +263,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -281,6 +288,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -331,6 +339,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -343,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -368,6 +378,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -439,6 +450,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -469,6 +486,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -551,6 +569,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -573,6 +592,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -625,9 +648,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -646,11 +672,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -660,7 +686,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -706,9 +732,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -734,7 +764,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -768,10 +800,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -791,6 +820,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -831,6 +861,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -882,6 +913,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -890,18 +922,24 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -928,11 +966,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/44x/katmai_defconfig b/arch/powerpc/configs/44x/katmai_defconfig index e326ee8bd19..f67250b24ec 100644 --- a/arch/powerpc/configs/44x/katmai_defconfig +++ b/arch/powerpc/configs/44x/katmai_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 09:16:11 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:22:38 2009 # # CONFIG_PPC64 is not set @@ -18,6 +18,7 @@ CONFIG_4xx=y CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -43,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -74,8 +75,8 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -110,7 +111,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -121,7 +121,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -129,11 +128,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -150,6 +147,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -187,6 +188,7 @@ CONFIG_440SPe=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -210,6 +212,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -224,12 +227,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -253,6 +258,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -277,6 +283,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -327,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -339,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -388,6 +397,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -472,6 +482,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -494,6 +505,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -546,9 +561,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -568,11 +586,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -582,7 +600,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -628,9 +646,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -656,7 +678,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -690,10 +714,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -702,6 +723,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -742,6 +764,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -792,6 +815,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -800,18 +824,24 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -837,11 +867,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/44x/rainier_defconfig b/arch/powerpc/configs/44x/rainier_defconfig index 927f829e208..9348c12bd7a 100644 --- a/arch/powerpc/configs/44x/rainier_defconfig +++ b/arch/powerpc/configs/44x/rainier_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 09:16:13 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:22:41 2009 # # CONFIG_PPC64 is not set @@ -18,6 +18,7 @@ CONFIG_4xx=y CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -43,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -74,12 +75,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -114,7 +115,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -125,7 +125,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -133,11 +132,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -154,6 +151,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -191,6 +192,7 @@ CONFIG_440GRX=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -214,6 +216,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -228,12 +231,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -257,6 +262,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -281,6 +287,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -331,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -343,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -368,6 +377,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -440,6 +450,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -470,6 +486,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -532,6 +549,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -554,6 +572,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -606,9 +628,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -627,11 +652,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -641,7 +666,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -687,9 +712,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -715,7 +744,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -749,10 +780,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -772,6 +800,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -812,6 +841,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -863,6 +893,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -871,18 +902,24 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -922,11 +959,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/44x/sam440ep_defconfig b/arch/powerpc/configs/44x/sam440ep_defconfig index 15f48e03ec2..70d5c3fa328 100644 --- a/arch/powerpc/configs/44x/sam440ep_defconfig +++ b/arch/powerpc/configs/44x/sam440ep_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 09:16:15 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:22:42 2009 # # CONFIG_PPC64 is not set @@ -19,6 +19,7 @@ CONFIG_4xx=y CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -44,7 +45,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -76,12 +77,12 @@ CONFIG_POSIX_MQUEUE=y CONFIG_IKCONFIG=y # CONFIG_IKCONFIG_PROC is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -115,7 +116,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -126,7 +126,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -134,11 +133,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -155,6 +152,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -193,6 +194,7 @@ CONFIG_IBM440EP_ERR42=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -216,6 +218,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -230,12 +233,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -258,6 +263,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -282,6 +288,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -332,6 +339,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -344,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -551,6 +560,10 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -605,6 +618,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -661,9 +675,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -730,8 +747,8 @@ CONFIG_I2C_IBM_IIC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -751,11 +768,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -764,9 +781,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -848,12 +869,13 @@ CONFIG_FB_RADEON_BACKLIGHT=y # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y # CONFIG_LCD_ILI9320 is not set # CONFIG_LCD_PLATFORM is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -# CONFIG_BACKLIGHT_CORGI is not set +CONFIG_BACKLIGHT_GENERIC=y # # Display device support @@ -894,11 +916,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -906,12 +926,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set CONFIG_THRUSTMASTER_FF=m CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y @@ -943,6 +966,7 @@ CONFIG_USB_EHCI_HCD=m # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -968,18 +992,17 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1027,6 +1050,10 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1065,6 +1092,7 @@ CONFIG_RTC_DRV_M41T80=y CONFIG_RTC_DRV_M41T80_WDT=y # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1117,6 +1145,7 @@ CONFIG_FS_POSIX_ACL=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1156,10 +1185,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set CONFIG_AFFS_FS=m # CONFIG_HFS_FS is not set @@ -1168,6 +1194,7 @@ CONFIG_AFFS_FS=m # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1245,6 +1272,7 @@ CONFIG_NLS_ISO8859_1=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1278,12 +1306,17 @@ CONFIG_MAGIC_SYSRQ=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/configs/44x/sequoia_defconfig b/arch/powerpc/configs/44x/sequoia_defconfig index 562beeaab53..a921fe3c371 100644 --- a/arch/powerpc/configs/44x/sequoia_defconfig +++ b/arch/powerpc/configs/44x/sequoia_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 09:16:16 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:22:45 2009 # # CONFIG_PPC64 is not set @@ -19,6 +19,7 @@ CONFIG_4xx=y CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -44,7 +45,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +76,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -115,7 +116,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -126,7 +126,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -134,11 +133,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -155,6 +152,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -192,6 +193,7 @@ CONFIG_440EPX=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -216,6 +218,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -230,12 +233,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -259,6 +264,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -283,6 +289,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -333,6 +340,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -345,6 +353,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -370,6 +379,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -442,6 +452,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -472,6 +488,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -554,6 +571,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -576,6 +594,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -628,9 +650,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -649,11 +674,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -663,7 +688,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -709,9 +734,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -737,7 +766,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -771,10 +802,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -794,6 +822,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -834,6 +863,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -885,6 +915,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -893,18 +924,24 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -944,11 +981,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/44x/taishan_defconfig b/arch/powerpc/configs/44x/taishan_defconfig index 427bb6a11be..826700872d2 100644 --- a/arch/powerpc/configs/44x/taishan_defconfig +++ b/arch/powerpc/configs/44x/taishan_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 09:16:18 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:22:47 2009 # # CONFIG_PPC64 is not set @@ -18,6 +18,7 @@ CONFIG_4xx=y CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -43,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -74,12 +75,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -114,7 +115,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -125,7 +125,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -133,11 +132,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -154,6 +151,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -191,6 +192,7 @@ CONFIG_440GX=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -214,6 +216,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -228,12 +231,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -257,6 +262,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -281,6 +287,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -331,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -343,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -368,6 +377,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -440,6 +450,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -470,6 +486,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -554,6 +571,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -576,6 +594,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -628,9 +650,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -649,11 +674,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -663,7 +688,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -709,9 +734,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -737,7 +766,9 @@ CONFIG_EXT2_FS=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -771,10 +802,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -784,6 +812,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -824,6 +853,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -874,6 +904,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -882,18 +913,24 @@ CONFIG_SCHED_DEBUG=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -920,11 +957,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/44x/virtex5_defconfig b/arch/powerpc/configs/44x/virtex5_defconfig index 7513d360e0b..15aab1ca638 100644 --- a/arch/powerpc/configs/44x/virtex5_defconfig +++ b/arch/powerpc/configs/44x/virtex5_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Fri Nov 14 10:31:16 2008 +# Linux kernel version: 2.6.29-rc2 +# Tue Jan 20 08:22:49 2009 # # CONFIG_PPC64 is not set @@ -18,6 +18,7 @@ CONFIG_4xx=y CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -44,7 +45,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -77,8 +78,8 @@ CONFIG_POSIX_MQUEUE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -116,7 +117,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -127,7 +127,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -135,11 +134,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -156,6 +153,10 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # CONFIG_PPC4xx_PCI_EXPRESS is not set @@ -194,6 +195,7 @@ CONFIG_XILINX_VIRTEX_5_FXT=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -211,13 +213,13 @@ CONFIG_HZ=250 # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -232,12 +234,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -261,6 +265,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -285,6 +290,8 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NET_NS is not set +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -428,6 +435,7 @@ CONFIG_IP_NF_MANGLE=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -443,8 +451,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -579,6 +588,10 @@ CONFIG_NETDEV_1000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -679,9 +692,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m # CONFIG_NVRAM is not set @@ -859,7 +875,6 @@ CONFIG_LOGO_LINUX_CLUT224=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -875,6 +890,7 @@ CONFIG_EXT2_FS=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -911,10 +927,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -923,6 +936,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1002,6 +1016,7 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1051,6 +1066,7 @@ CONFIG_DEBUG_INFO=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1060,6 +1076,8 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1069,11 +1087,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1099,6 +1119,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/44x/warp_defconfig b/arch/powerpc/configs/44x/warp_defconfig index 59cbd2761ed..3b77f092abe 100644 --- a/arch/powerpc/configs/44x/warp_defconfig +++ b/arch/powerpc/configs/44x/warp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 09:16:22 2008 +# Linux kernel version: 2.6.29-rc2 +# Fri Jan 23 07:57:16 2009 # # CONFIG_PPC64 is not set @@ -19,6 +19,7 @@ CONFIG_4xx=y CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -44,7 +45,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +76,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -113,7 +114,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -124,7 +124,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -132,11 +131,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -153,6 +150,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -190,6 +191,7 @@ CONFIG_IBM440EP_ERR42=y # CONFIG_GENERIC_IOMAP is not set # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -213,6 +215,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -227,12 +230,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -273,6 +278,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -348,6 +354,7 @@ CONFIG_VLAN_8021Q=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -360,6 +367,7 @@ CONFIG_VLAN_8021Q=y # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -380,8 +388,9 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set -# CONFIG_MTD_CMDLINE_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y # CONFIG_MTD_AR7_PARTS is not set @@ -396,7 +405,7 @@ CONFIG_MTD_BLOCK=y # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set # CONFIG_SSFDC is not set -CONFIG_MTD_OOPS=m +# CONFIG_MTD_OOPS is not set # # RAM/ROM/Flash chip drivers @@ -450,6 +459,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_ECC_SMC=y # CONFIG_MTD_NAND_MUSEUM_IDS is not set CONFIG_MTD_NAND_IDS=y +CONFIG_MTD_NAND_NDFC=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_NANDSIM is not set # CONFIG_MTD_NAND_PLATFORM is not set @@ -458,6 +468,12 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -480,7 +496,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -562,6 +580,10 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -616,9 +638,12 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -638,7 +663,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # -# CONFIG_I2C_IBM_IIC is not set +CONFIG_I2C_IBM_IIC=y # CONFIG_I2C_MPC is not set # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -660,8 +685,8 @@ CONFIG_I2C_HELPER_AUTO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=y +CONFIG_EEPROM_AT24=y +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -679,7 +704,7 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_AD7414 is not set +CONFIG_SENSORS_AD7414=y # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -687,8 +712,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_F71805F is not set @@ -708,6 +735,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -729,13 +757,26 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set CONFIG_THERMAL=y -# CONFIG_THERMAL_HWMON is not set -# CONFIG_WATCHDOG is not set +CONFIG_THERMAL_HWMON=y +CONFIG_WATCHDOG=y +# CONFIG_WATCHDOG_NOWAYOUT is not set # -# Sonics Silicon Backplane +# Watchdog Device Drivers +# +# CONFIG_SOFT_WATCHDOG is not set +CONFIG_PIKA_WDT=y +# CONFIG_BOOKE_WDT is not set + +# +# USB-based Watchdog Cards # +# CONFIG_USBPCWATCHDOG is not set CONFIG_SSB_POSSIBLE=y + +# +# Sonics Silicon Backplane +# # CONFIG_SSB is not set # @@ -744,9 +785,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -802,6 +847,7 @@ CONFIG_USB_MON=y # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -824,18 +870,17 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -880,14 +925,18 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set -CONFIG_MMC=m + +# +# OTG and related infrastructure +# +CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set # CONFIG_MMC_UNSAFE_RESUME is not set # # MMC/SD/SDIO Card Drivers # -CONFIG_MMC_BLOCK=m +CONFIG_MMC_BLOCK=y CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_SDIO_UART is not set # CONFIG_MMC_TEST is not set @@ -898,7 +947,18 @@ CONFIG_MMC_BLOCK_BOUNCE=y # CONFIG_MMC_SDHCI is not set # CONFIG_MMC_WBSD is not set # CONFIG_MEMSTICK is not set -# CONFIG_NEW_LEDS is not set +CONFIG_NEW_LEDS=y +CONFIG_LEDS_CLASS=y + +# +# LED drivers +# +# CONFIG_LEDS_PCA955X is not set + +# +# LED Triggers +# +# CONFIG_LEDS_TRIGGERS is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set @@ -912,14 +972,18 @@ CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set -# CONFIG_EXT3_FS is not set +CONFIG_EXT3_FS=y +# CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set +CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -952,13 +1016,11 @@ CONFIG_PROC_KCORE=y CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y -# CONFIG_TMPFS is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -978,6 +1040,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1057,6 +1120,7 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1107,6 +1171,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1115,18 +1180,24 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1134,7 +1205,7 @@ CONFIG_HAVE_ARCH_KGDB=y # CONFIG_FTR_FIXUP_SELFTEST is not set # CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set -# CONFIG_IRQSTACKS is not set +CONFIG_IRQSTACKS=y # CONFIG_VIRQ_DEBUG is not set CONFIG_BDI_SWITCH=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -1153,6 +1224,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/52xx/cm5200_defconfig b/arch/powerpc/configs/52xx/cm5200_defconfig index 3df627494b6..99c495ad9c7 100644 --- a/arch/powerpc/configs/52xx/cm5200_defconfig +++ b/arch/powerpc/configs/52xx/cm5200_defconfig @@ -629,8 +629,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/52xx/lite5200b_defconfig b/arch/powerpc/configs/52xx/lite5200b_defconfig index 5b969f9c925..9796220032f 100644 --- a/arch/powerpc/configs/52xx/lite5200b_defconfig +++ b/arch/powerpc/configs/52xx/lite5200b_defconfig @@ -762,8 +762,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/52xx/motionpro_defconfig b/arch/powerpc/configs/52xx/motionpro_defconfig index 3c0d4e56172..d081e003105 100644 --- a/arch/powerpc/configs/52xx/motionpro_defconfig +++ b/arch/powerpc/configs/52xx/motionpro_defconfig @@ -629,8 +629,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=y +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/52xx/pcm030_defconfig b/arch/powerpc/configs/52xx/pcm030_defconfig index 9d0207783d6..b21b8e8c3a7 100644 --- a/arch/powerpc/configs/52xx/pcm030_defconfig +++ b/arch/powerpc/configs/52xx/pcm030_defconfig @@ -740,8 +740,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=m +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/52xx/tqm5200_defconfig b/arch/powerpc/configs/52xx/tqm5200_defconfig index bc190051e8d..79954579f5e 100644 --- a/arch/powerpc/configs/52xx/tqm5200_defconfig +++ b/arch/powerpc/configs/52xx/tqm5200_defconfig @@ -645,8 +645,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig index cbecaf3d790..fc4a39a40e7 100644 --- a/arch/powerpc/configs/83xx/asp8347_defconfig +++ b/arch/powerpc/configs/83xx/asp8347_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:49 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:47 2009 # # CONFIG_PPC64 is not set @@ -44,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -76,12 +76,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -114,7 +114,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -124,7 +123,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -132,11 +130,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -153,6 +149,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -199,6 +199,8 @@ CONFIG_IPIC=y # CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_MCU_MPC8349EMITX is not set # # Kernel options @@ -226,6 +228,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -237,12 +240,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -267,6 +272,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -289,6 +295,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -345,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -360,8 +368,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -382,6 +391,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set CONFIG_MTD_REDBOOT_PARTS=y CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED=y @@ -456,6 +466,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -486,8 +502,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -536,6 +554,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -590,6 +611,10 @@ CONFIG_GIANFAR=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -666,8 +691,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -732,15 +759,14 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set -# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -760,8 +786,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -782,6 +810,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -827,11 +856,11 @@ CONFIG_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -840,18 +869,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -916,6 +940,7 @@ CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set @@ -934,11 +959,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # # CONFIG_USB_LIBUSUAL is not set @@ -977,6 +1002,10 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1014,6 +1043,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1061,6 +1091,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1094,10 +1125,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1117,6 +1145,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1209,6 +1238,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1244,6 +1274,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1251,6 +1283,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1269,11 +1302,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig index bfc32ea265a..9e47ae957e2 100644 --- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:50 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:48 2009 # # CONFIG_PPC64 is not set @@ -44,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +75,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -113,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,7 +122,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -131,11 +129,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -152,6 +148,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -198,6 +198,8 @@ CONFIG_IPIC=y # CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_MCU_MPC8349EMITX is not set # # Kernel options @@ -225,6 +227,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -236,12 +239,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -267,6 +272,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -289,6 +295,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -345,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -360,8 +368,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -384,6 +393,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -468,6 +478,12 @@ CONFIG_MTD_NAND_FSL_ELBC=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -499,8 +515,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -543,6 +561,7 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -559,6 +578,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -627,6 +648,9 @@ CONFIG_CICADA_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -651,7 +675,6 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -661,6 +684,7 @@ CONFIG_E100=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -691,6 +715,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -715,6 +740,10 @@ CONFIG_NETDEV_10000=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -792,8 +821,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -858,15 +889,14 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set -# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -884,7 +914,7 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -902,8 +932,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -925,6 +957,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set @@ -971,11 +1004,11 @@ CONFIG_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -984,18 +1017,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1080,6 +1108,7 @@ CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1106,18 +1135,17 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1177,9 +1205,11 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set # CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_AMD5536UDC is not set # CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set CONFIG_USB_GADGET_NET2280=y CONFIG_USB_NET2280=y # CONFIG_USB_GADGET_GOKU is not set @@ -1194,6 +1224,10 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1231,12 +1265,14 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set @@ -1284,6 +1320,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1317,10 +1354,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1340,6 +1374,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1397,6 +1432,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1448,6 +1484,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1457,6 +1494,8 @@ CONFIG_SCHED_DEBUG=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1465,11 +1504,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1496,11 +1537,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig index aad0e1a98c5..03db97c6cf3 100644 --- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:51 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:49 2009 # # CONFIG_PPC64 is not set @@ -44,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +75,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -113,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,7 +122,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -131,11 +129,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -152,6 +148,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -198,6 +198,8 @@ CONFIG_IPIC=y # CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_MCU_MPC8349EMITX is not set # # Kernel options @@ -225,6 +227,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -236,12 +239,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -267,6 +272,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -289,6 +295,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -345,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -360,8 +368,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -384,6 +393,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set @@ -468,6 +478,12 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -499,8 +515,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -543,6 +561,7 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -559,6 +578,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -688,6 +709,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -712,7 +736,6 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -722,6 +745,7 @@ CONFIG_E100=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -752,6 +776,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -776,6 +801,10 @@ CONFIG_NETDEV_10000=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -853,8 +882,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -919,15 +950,14 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set -# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -945,7 +975,7 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -963,8 +993,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -986,6 +1018,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set @@ -1032,11 +1065,11 @@ CONFIG_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -1045,18 +1078,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1141,6 +1169,7 @@ CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1167,18 +1196,17 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1238,9 +1266,11 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set # CONFIG_USB_GADGET_M66592 is not set # CONFIG_USB_GADGET_AMD5536UDC is not set # CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set CONFIG_USB_GADGET_NET2280=y CONFIG_USB_NET2280=y # CONFIG_USB_GADGET_GOKU is not set @@ -1255,6 +1285,10 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1292,12 +1326,14 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set @@ -1345,6 +1381,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1378,10 +1415,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1401,6 +1435,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1458,6 +1493,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1509,6 +1545,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1518,6 +1555,8 @@ CONFIG_SCHED_DEBUG=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1526,11 +1565,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1557,11 +1598,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig index 9cb8c8b956e..fb17de53cc0 100644 --- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:53 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:50 2009 # # CONFIG_PPC64 is not set @@ -44,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +75,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -113,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,7 +122,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -131,11 +129,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -152,6 +148,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -198,6 +198,8 @@ CONFIG_IPIC=y CONFIG_QUICC_ENGINE=y # CONFIG_QE_GPIO is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_MCU_MPC8349EMITX is not set # # Kernel options @@ -226,6 +228,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -237,12 +240,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -267,6 +272,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -289,6 +295,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -345,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -360,8 +368,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -405,8 +414,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -449,6 +460,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -465,6 +477,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -523,6 +537,9 @@ CONFIG_DAVICOM_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -563,7 +580,6 @@ CONFIG_NETDEV_1000=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set -# CONFIG_UGETH_FILTERING is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -572,6 +588,7 @@ CONFIG_UCC_GETH=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -594,6 +611,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -665,8 +686,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -730,15 +753,14 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set -# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -758,8 +780,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -780,6 +804,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -820,11 +845,11 @@ CONFIG_WATCHDOG=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -833,18 +858,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -900,9 +920,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -940,6 +964,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -987,6 +1012,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1020,10 +1046,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1032,6 +1055,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1087,6 +1111,7 @@ CONFIG_UCC=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1120,6 +1145,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1127,6 +1154,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1145,11 +1173,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig index 9cc976f010c..a012ce23520 100644 --- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:54 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:52 2009 # # CONFIG_PPC64 is not set @@ -44,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +75,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -113,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,7 +122,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -131,11 +129,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -152,6 +148,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -198,6 +198,8 @@ CONFIG_IPIC=y CONFIG_QUICC_ENGINE=y # CONFIG_QE_GPIO is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_MCU_MPC8349EMITX is not set # # Kernel options @@ -226,6 +228,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -237,12 +240,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -267,6 +272,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -289,6 +295,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -345,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -360,8 +368,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -407,8 +416,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -451,6 +462,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -467,6 +479,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -525,6 +539,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set CONFIG_ICPLUS_PHY=y # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -566,7 +583,6 @@ CONFIG_E1000=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set -# CONFIG_UGETH_FILTERING is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -575,6 +591,7 @@ CONFIG_UCC_GETH=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -599,6 +616,10 @@ CONFIG_NETDEV_10000=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -677,8 +698,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -745,15 +768,14 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set -# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -770,7 +792,7 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -788,8 +810,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -811,6 +835,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1111 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set @@ -857,11 +882,11 @@ CONFIG_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -870,18 +895,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -966,6 +986,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -991,18 +1012,17 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1050,6 +1070,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set @@ -1099,6 +1123,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1135,10 +1160,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1147,6 +1169,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1246,6 +1269,7 @@ CONFIG_UCC=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1279,6 +1303,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1286,6 +1312,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1304,11 +1331,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig index 07a674f5344..4bcc4a1ff30 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:56 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:53 2009 # # CONFIG_PPC64 is not set @@ -44,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +75,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -113,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,7 +122,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -131,11 +129,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -152,6 +148,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -198,6 +198,8 @@ CONFIG_IPIC=y # CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_MCU_MPC8349EMITX is not set # # Kernel options @@ -225,6 +227,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -236,12 +239,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -266,6 +271,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -288,6 +294,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -344,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -359,8 +367,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -381,6 +390,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set # CONFIG_MTD_PARTITIONS is not set +# CONFIG_MTD_TESTS is not set # # User Modules And Translation Layers @@ -426,9 +436,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0xfe000000 -CONFIG_MTD_PHYSMAP_LEN=0x1000000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_PHYSMAP_OF is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -454,6 +462,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -485,8 +499,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -499,7 +515,6 @@ CONFIG_IDE_GD_ATA=y # CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -524,6 +539,7 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -577,6 +593,7 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -593,6 +610,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -723,6 +742,9 @@ CONFIG_CICADA_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set # CONFIG_NET_ETHERNET is not set @@ -751,6 +773,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -775,6 +798,10 @@ CONFIG_NETDEV_10000=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -832,8 +859,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -898,15 +927,14 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set -# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -923,7 +951,7 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -953,11 +981,11 @@ CONFIG_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -966,18 +994,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1041,6 +1064,7 @@ CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set @@ -1059,18 +1083,17 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1117,6 +1140,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1154,12 +1181,14 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set @@ -1207,6 +1236,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1243,10 +1273,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1256,6 +1283,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1352,6 +1380,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1385,6 +1414,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1392,6 +1423,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1410,11 +1442,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig index 426232cb009..9ba5518ce8d 100644 --- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:57 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:55 2009 # # CONFIG_PPC64 is not set @@ -44,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +75,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -113,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,7 +122,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -131,11 +129,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -152,6 +148,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -198,6 +198,8 @@ CONFIG_IPIC=y # CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_MCU_MPC8349EMITX is not set # # Kernel options @@ -225,6 +227,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -236,12 +239,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -266,6 +271,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -288,6 +294,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -344,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -359,8 +367,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -381,6 +390,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set # CONFIG_MTD_PARTITIONS is not set +# CONFIG_MTD_TESTS is not set # # User Modules And Translation Layers @@ -426,9 +436,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0xfe000000 -CONFIG_MTD_PHYSMAP_LEN=0x800000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_PHYSMAP_OF is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -454,6 +462,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=2 # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -485,8 +499,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -529,6 +545,7 @@ CONFIG_SCSI_SPI_ATTRS=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -545,6 +562,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -603,6 +622,9 @@ CONFIG_CICADA_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set # CONFIG_NET_ETHERNET is not set @@ -631,6 +653,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -655,6 +678,10 @@ CONFIG_NETDEV_10000=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -712,8 +739,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -778,15 +807,14 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set CONFIG_SENSORS_PCF8574=y # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set -# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -803,7 +831,7 @@ CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -833,11 +861,11 @@ CONFIG_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -846,18 +874,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -921,6 +944,7 @@ CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set @@ -939,18 +963,17 @@ CONFIG_USB_UHCI_HCD=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -996,6 +1019,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1033,12 +1060,14 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set @@ -1086,6 +1115,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1122,10 +1152,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1135,6 +1162,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1231,6 +1259,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1264,6 +1293,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1271,6 +1302,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1289,11 +1321,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig index 36e2e93a1c5..18e4bc0b3c1 100644 --- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:58 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:56 2009 # # CONFIG_PPC64 is not set @@ -44,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +75,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -113,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,7 +122,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -131,11 +129,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -152,6 +148,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -198,6 +198,8 @@ CONFIG_IPIC=y # CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_MCU_MPC8349EMITX is not set # # Kernel options @@ -225,6 +227,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -236,12 +239,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -266,6 +271,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -288,6 +294,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -344,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -359,8 +367,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -404,8 +413,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -454,6 +465,9 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -477,7 +491,6 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -487,6 +500,7 @@ CONFIG_E100=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -517,6 +531,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -539,6 +554,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -608,8 +627,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -673,15 +694,14 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set -# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -701,8 +721,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -723,6 +745,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -763,11 +786,11 @@ CONFIG_WATCHDOG=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -776,18 +799,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -843,9 +861,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -883,6 +905,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -930,6 +953,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -963,10 +987,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -975,6 +996,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1028,6 +1050,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1061,6 +1084,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1068,6 +1093,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1086,11 +1112,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig index 80eb6c9a05c..76db8138eac 100644 --- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:59 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:58 2009 # # CONFIG_PPC64 is not set @@ -44,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +75,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -113,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,7 +122,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -131,11 +129,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -152,6 +148,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -197,6 +197,8 @@ CONFIG_IPIC=y CONFIG_QUICC_ENGINE=y # CONFIG_QE_GPIO is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_MCU_MPC8349EMITX is not set # # Kernel options @@ -224,6 +226,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -235,12 +238,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -265,6 +270,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -287,6 +293,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -343,6 +350,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -358,8 +366,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -380,6 +389,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -451,6 +461,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -480,8 +496,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -524,6 +542,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -540,6 +559,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -598,6 +619,9 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -638,7 +662,6 @@ CONFIG_NETDEV_1000=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set -# CONFIG_UGETH_FILTERING is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -647,6 +670,7 @@ CONFIG_UCC_GETH=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -669,6 +693,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -740,8 +768,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -805,15 +835,14 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set -# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -833,8 +862,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -855,6 +886,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -895,11 +927,11 @@ CONFIG_WATCHDOG=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -908,18 +940,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -975,9 +1002,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1015,6 +1046,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1062,6 +1094,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1095,10 +1128,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1108,6 +1138,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1163,6 +1194,7 @@ CONFIG_UCC=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1196,6 +1228,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1203,6 +1237,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1221,11 +1256,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig index b9b236806e9..0dc11c44306 100644 --- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig +++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:00 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:01 2009 # # CONFIG_PPC64 is not set @@ -45,7 +45,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -76,12 +76,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -114,7 +114,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -124,7 +123,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -132,11 +130,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -153,6 +149,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -198,6 +198,8 @@ CONFIG_IPIC=y CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_MCU_MPC8349EMITX is not set # # Kernel options @@ -224,6 +226,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -235,12 +238,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -267,6 +272,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -289,6 +295,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -345,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -360,8 +368,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -384,6 +393,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -462,6 +472,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -493,8 +509,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -543,6 +561,9 @@ CONFIG_PHYLIB=y CONFIG_BROADCOM_PHY=y # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set # CONFIG_NET_ETHERNET is not set @@ -566,7 +587,6 @@ CONFIG_NETDEV_1000=y # CONFIG_GIANFAR is not set CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set -# CONFIG_UGETH_FILTERING is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -582,6 +602,10 @@ CONFIG_UCC_GETH=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -656,8 +680,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_SERIAL_QE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -723,16 +749,14 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set -# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -744,12 +768,13 @@ CONFIG_SPI_MASTER=y # SPI Master Controller Drivers # CONFIG_SPI_BITBANG=y +# CONFIG_SPI_GPIO is not set CONFIG_SPI_MPC83xx=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set CONFIG_SPI_SPIDEV=y # CONFIG_SPI_TLE62X0 is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y @@ -758,6 +783,11 @@ CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set # +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# # I2C GPIO expanders: # # CONFIG_GPIO_MAX732X is not set @@ -794,11 +824,11 @@ CONFIG_WATCHDOG=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -807,18 +837,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -897,6 +923,7 @@ CONFIG_FB_OF=y # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -962,6 +989,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -995,10 +1023,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1018,6 +1043,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1074,6 +1100,7 @@ CONFIG_UCC=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1109,6 +1136,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1116,6 +1145,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set CONFIG_PPC_EARLY_DEBUG=y @@ -1145,11 +1175,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig index f6350d7e168..e42f6b3917d 100644 --- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:00 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:59 2009 # # CONFIG_PPC64 is not set @@ -44,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +75,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -113,7 +113,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -124,7 +123,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -132,11 +130,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -153,6 +149,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -199,6 +199,8 @@ CONFIG_IPIC=y # CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_MCU_MPC8349EMITX is not set # # Kernel options @@ -225,6 +227,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -236,12 +239,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -266,6 +271,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -288,6 +294,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -344,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -359,8 +367,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -404,8 +413,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -448,6 +459,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -464,6 +476,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -583,6 +597,9 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -628,6 +645,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -650,6 +668,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -720,8 +742,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -787,15 +811,14 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set -# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -815,8 +838,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -837,6 +862,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -877,11 +903,11 @@ CONFIG_WATCHDOG=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -890,18 +916,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -957,9 +978,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -991,6 +1016,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1024,10 +1050,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1036,6 +1059,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1093,6 +1117,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1124,6 +1149,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1131,6 +1158,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1149,11 +1177,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig index f447de16f75..408022f79a5 100644 --- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig +++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:01 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:01 2009 # # CONFIG_PPC64 is not set @@ -44,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +75,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -113,7 +113,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -124,7 +123,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -132,11 +130,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -153,6 +149,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -199,6 +199,8 @@ CONFIG_IPIC=y # CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_MCU_MPC8349EMITX is not set # # Kernel options @@ -225,6 +227,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -236,12 +239,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -266,6 +271,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -288,6 +294,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -339,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -354,8 +362,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -400,8 +409,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -460,6 +471,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -590,6 +603,9 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -644,6 +660,10 @@ CONFIG_GIANFAR=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -721,8 +741,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -789,15 +811,14 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set -# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -817,8 +838,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -839,6 +862,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -884,11 +908,11 @@ CONFIG_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -897,18 +921,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -961,11 +980,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -973,12 +990,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set CONFIG_THRUSTMASTER_FF=m CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y @@ -1011,6 +1031,7 @@ CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set @@ -1029,11 +1050,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set @@ -1074,6 +1095,10 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1105,6 +1130,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1138,10 +1164,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1150,6 +1173,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1207,6 +1231,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1238,6 +1263,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1245,6 +1272,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1267,11 +1295,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig index 8d2d7eeab5f..a0c42fb65cb 100644 --- a/arch/powerpc/configs/83xx/sbc834x_defconfig +++ b/arch/powerpc/configs/83xx/sbc834x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:02 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:02 2009 # # CONFIG_PPC64 is not set @@ -44,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +75,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -112,7 +112,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -122,7 +121,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -130,11 +128,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,6 +147,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -197,6 +197,8 @@ CONFIG_IPIC=y # CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_MCU_MPC8349EMITX is not set # # Kernel options @@ -223,6 +225,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -234,12 +237,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -264,6 +269,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -286,6 +292,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -342,6 +349,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -357,8 +365,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -402,8 +411,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -452,6 +463,9 @@ CONFIG_PHYLIB=y CONFIG_BROADCOM_PHY=y # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -504,6 +518,10 @@ CONFIG_GIANFAR=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -573,8 +591,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -640,15 +660,14 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set -# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -668,8 +687,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -690,6 +711,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -730,11 +752,11 @@ CONFIG_WATCHDOG=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -743,18 +765,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -822,6 +839,7 @@ CONFIG_HID_COMPAT=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -855,10 +873,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -867,6 +882,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -908,6 +924,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -939,6 +956,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -946,6 +965,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -964,11 +984,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig index 1af7b9e37b6..6479bb9f3f5 100644 --- a/arch/powerpc/configs/85xx/ksi8560_defconfig +++ b/arch/powerpc/configs/85xx/ksi8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:03 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:03 2009 # # CONFIG_PPC64 is not set @@ -21,7 +21,9 @@ CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set @@ -46,7 +48,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -76,8 +78,8 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -111,7 +113,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -122,13 +123,11 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -145,6 +144,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -185,6 +188,7 @@ CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -222,12 +226,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -268,6 +274,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -324,6 +331,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -339,8 +347,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -432,6 +441,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -454,6 +469,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -507,9 +523,12 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=y -# CONFIG_MDIO_OF_GPIO is not set +# CONFIG_MDIO_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -534,6 +553,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -595,8 +618,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -614,6 +639,11 @@ CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set # +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# # I2C GPIO expanders: # @@ -642,11 +672,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -656,14 +686,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set - -# -# Voltage and Current regulators -# # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -716,9 +739,13 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -749,6 +776,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -782,10 +810,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -795,6 +820,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -845,6 +871,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -895,6 +922,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -904,6 +932,8 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -912,11 +942,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -943,6 +975,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig index e243e14a670..e31b6a4732e 100644 --- a/arch/powerpc/configs/85xx/mpc8536_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8536_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:05 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:04 2009 # # CONFIG_PPC64 is not set @@ -21,7 +21,9 @@ CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set @@ -45,7 +47,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -78,12 +80,12 @@ CONFIG_AUDIT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -96,6 +98,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -118,7 +121,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -129,7 +131,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -137,11 +138,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -158,6 +157,10 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -197,6 +200,7 @@ CONFIG_MPIC=y # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -235,12 +239,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -265,6 +271,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -288,6 +295,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -376,6 +384,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -392,8 +401,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -442,8 +452,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -487,6 +499,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -503,6 +516,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -622,6 +637,9 @@ CONFIG_VITESSE_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -668,6 +686,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -692,6 +711,10 @@ CONFIG_NETDEV_10000=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -783,8 +806,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -849,8 +874,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=y +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -869,11 +894,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -882,18 +907,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -920,6 +940,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m +# CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -965,6 +986,12 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_FE_CUSTOMISE is not set # +# Multistandard (satellite) frontends +# +# CONFIG_DVB_STB0899 is not set +# CONFIG_DVB_STB6100 is not set + +# # DVB-S (satellite) frontends # # CONFIG_DVB_CX24110 is not set @@ -976,8 +1003,10 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_TDA8261 is not set # CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TUNER_CX24113 is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TUA6100 is not set # CONFIG_DVB_CX24116 is not set @@ -1018,11 +1047,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_OR51132 is not set # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set +# CONFIG_DVB_LGDT3304 is not set # CONFIG_DVB_S5H1409 is not set # CONFIG_DVB_AU8522 is not set # CONFIG_DVB_S5H1411 is not set # +# ISDB-T (terrestrial) frontends +# +# CONFIG_DVB_S921 is not set + +# # Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set @@ -1073,6 +1108,7 @@ CONFIG_SND_PCM=y # CONFIG_SND_SEQUENCER is not set # CONFIG_SND_MIXER_OSS is not set # CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set CONFIG_SND_SUPPORT_OLD_API=y CONFIG_SND_VERBOSE_PROCFS=y @@ -1175,11 +1211,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -1187,12 +1221,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set CONFIG_THRUSTMASTER_FF=m CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y @@ -1225,6 +1262,7 @@ CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1250,18 +1288,17 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1309,6 +1346,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1346,6 +1387,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1405,7 +1447,9 @@ CONFIG_FS_MBCACHE=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1447,10 +1491,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y CONFIG_ADFS_FS=m # CONFIG_ADFS_FS_RW is not set CONFIG_AFFS_FS=m @@ -1461,6 +1502,7 @@ CONFIG_BEFS_FS=m CONFIG_BFS_FS=m CONFIG_EFS_FS=m CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set CONFIG_VXFS_FS=m # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1562,6 +1604,7 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1613,6 +1656,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1622,6 +1666,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1630,11 +1676,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1661,11 +1709,16 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1699,7 +1752,7 @@ CONFIG_CRYPTO_HMAC=y # # Digest # -# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig index d790cbab80b..905e8a3388d 100644 --- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:06 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:05 2009 # # CONFIG_PPC64 is not set @@ -21,7 +21,9 @@ CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set @@ -45,7 +47,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +77,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -114,7 +116,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -124,13 +125,11 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -147,6 +146,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -186,6 +189,7 @@ CONFIG_MPIC=y # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -224,12 +228,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -270,6 +276,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -326,6 +333,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -341,8 +349,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -380,6 +389,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -415,6 +425,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -437,6 +450,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -502,8 +519,10 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -534,11 +553,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -548,14 +567,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set - -# -# Voltage and Current regulators -# # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -608,9 +620,13 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -640,6 +656,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -673,10 +690,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -685,6 +699,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -735,6 +750,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -784,6 +800,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -793,6 +810,8 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -801,11 +820,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -831,6 +852,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig index f6cb01495ea..f6fa0b761cb 100644 --- a/arch/powerpc/configs/85xx/mpc8544_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8544_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:08 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:07 2009 # # CONFIG_PPC64 is not set @@ -21,7 +21,9 @@ CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set @@ -45,7 +47,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -78,12 +80,12 @@ CONFIG_AUDIT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -96,6 +98,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -118,7 +121,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -129,7 +131,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -137,11 +138,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -158,6 +157,10 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -197,6 +200,7 @@ CONFIG_PPC_I8259=y # CONFIG_CPM2 is not set CONFIG_FSL_ULI1575=y # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -235,12 +239,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -266,6 +272,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -289,6 +296,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -377,6 +385,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -393,8 +402,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -443,8 +453,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -488,6 +500,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -504,6 +517,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -623,6 +638,9 @@ CONFIG_VITESSE_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -667,6 +685,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -691,6 +710,10 @@ CONFIG_NETDEV_10000=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -782,8 +805,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y CONFIG_NVRAM=y @@ -848,8 +873,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=y +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -869,11 +894,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -882,18 +907,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -920,6 +940,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m +# CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -965,6 +986,12 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_FE_CUSTOMISE is not set # +# Multistandard (satellite) frontends +# +# CONFIG_DVB_STB0899 is not set +# CONFIG_DVB_STB6100 is not set + +# # DVB-S (satellite) frontends # # CONFIG_DVB_CX24110 is not set @@ -976,8 +1003,10 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_TDA8261 is not set # CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TUNER_CX24113 is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TUA6100 is not set # CONFIG_DVB_CX24116 is not set @@ -1018,11 +1047,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_OR51132 is not set # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set +# CONFIG_DVB_LGDT3304 is not set # CONFIG_DVB_S5H1409 is not set # CONFIG_DVB_AU8522 is not set # CONFIG_DVB_S5H1411 is not set # +# ISDB-T (terrestrial) frontends +# +# CONFIG_DVB_S921 is not set + +# # Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set @@ -1075,6 +1110,7 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y @@ -1177,11 +1213,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -1189,12 +1223,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set CONFIG_THRUSTMASTER_FF=m CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y @@ -1227,6 +1264,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1252,18 +1290,17 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1311,6 +1348,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1348,6 +1389,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1406,7 +1448,9 @@ CONFIG_FS_MBCACHE=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1448,10 +1492,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y CONFIG_ADFS_FS=m # CONFIG_ADFS_FS_RW is not set CONFIG_AFFS_FS=m @@ -1462,6 +1503,7 @@ CONFIG_BEFS_FS=m CONFIG_BFS_FS=m CONFIG_EFS_FS=m CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set CONFIG_VXFS_FS=m # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1563,6 +1605,7 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1614,6 +1657,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1623,6 +1667,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1631,11 +1677,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1661,11 +1709,16 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1699,7 +1752,7 @@ CONFIG_CRYPTO_HMAC=y # # Digest # -# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig index 6cf929259ba..095e2ded6e8 100644 --- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig +++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:09 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:09 2009 # # CONFIG_PPC64 is not set @@ -21,7 +21,9 @@ CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set @@ -46,7 +48,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -76,12 +78,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -116,7 +118,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -127,13 +128,11 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -150,6 +149,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -190,6 +193,7 @@ CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -227,12 +231,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -257,6 +263,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -280,6 +287,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -336,6 +344,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -351,8 +360,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -400,6 +410,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -448,6 +459,9 @@ CONFIG_DAVICOM_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -496,6 +510,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -518,6 +533,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -583,8 +602,10 @@ CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -604,6 +625,11 @@ CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set # +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# # I2C GPIO expanders: # @@ -637,11 +663,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -651,14 +677,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set - -# -# Voltage and Current regulators -# # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -714,9 +733,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -748,6 +771,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -781,10 +805,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -793,6 +814,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -843,6 +865,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -892,6 +915,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -901,6 +925,8 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -909,11 +935,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -939,6 +967,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/85xx/mpc8568mds_defconfig b/arch/powerpc/configs/85xx/mpc8568mds_defconfig index 597be849181..186c1010a13 100644 --- a/arch/powerpc/configs/85xx/mpc8568mds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8568mds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:11 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:10 2009 # # CONFIG_PPC64 is not set @@ -21,7 +21,9 @@ CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set @@ -45,7 +47,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +77,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -113,7 +115,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,7 +124,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -131,11 +131,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -152,6 +150,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -192,6 +194,7 @@ CONFIG_QUICC_ENGINE=y # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -230,12 +233,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -260,6 +265,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -283,6 +289,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -339,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -354,8 +362,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -401,8 +410,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -445,6 +456,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -461,6 +473,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -519,6 +533,9 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -564,6 +581,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -586,6 +604,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -658,8 +680,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -723,8 +747,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -750,8 +774,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -772,6 +798,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -812,11 +839,11 @@ CONFIG_WATCHDOG=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -825,18 +852,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -892,9 +914,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -932,6 +958,7 @@ CONFIG_RTC_DRV_DS1374=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -979,6 +1006,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1012,10 +1040,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1024,6 +1049,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1077,6 +1103,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1126,6 +1153,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1135,6 +1163,8 @@ CONFIG_SCHED_DEBUG=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1143,11 +1173,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1184,11 +1216,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig index 32aeb79216f..813223ae174 100644 --- a/arch/powerpc/configs/85xx/mpc8572_ds_defconfig +++ b/arch/powerpc/configs/85xx/mpc8572_ds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc8 -# Tue Dec 30 11:17:46 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:12 2009 # # CONFIG_PPC64 is not set @@ -48,7 +48,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -81,12 +81,12 @@ CONFIG_AUDIT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -99,6 +99,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -121,7 +122,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -133,7 +133,6 @@ CONFIG_USE_GENERIC_SMP_HELPERS=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -141,12 +140,10 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -163,6 +160,10 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -242,7 +243,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y @@ -276,6 +276,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -299,6 +300,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -387,6 +389,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -403,8 +406,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -500,6 +504,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -516,6 +521,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -635,6 +642,9 @@ CONFIG_VITESSE_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -679,6 +689,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -703,6 +714,10 @@ CONFIG_NETDEV_10000=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -794,6 +809,7 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HVC_UDBG is not set @@ -861,8 +877,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=y +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -895,10 +911,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -926,6 +944,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m +# CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -971,6 +990,12 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_FE_CUSTOMISE is not set # +# Multistandard (satellite) frontends +# +# CONFIG_DVB_STB0899 is not set +# CONFIG_DVB_STB6100 is not set + +# # DVB-S (satellite) frontends # # CONFIG_DVB_CX24110 is not set @@ -982,8 +1007,10 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_TDA8261 is not set # CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TUNER_CX24113 is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TUA6100 is not set # CONFIG_DVB_CX24116 is not set @@ -1024,11 +1051,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_OR51132 is not set # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set +# CONFIG_DVB_LGDT3304 is not set # CONFIG_DVB_S5H1409 is not set # CONFIG_DVB_AU8522 is not set # CONFIG_DVB_S5H1411 is not set # +# ISDB-T (terrestrial) frontends +# +# CONFIG_DVB_S921 is not set + +# # Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set @@ -1081,6 +1114,7 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y @@ -1183,11 +1217,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -1195,12 +1227,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set CONFIG_THRUSTMASTER_FF=m CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y @@ -1233,6 +1268,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1269,7 +1305,6 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1317,6 +1352,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1401,7 +1440,9 @@ CONFIG_FS_MBCACHE=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1443,10 +1484,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y CONFIG_ADFS_FS=m # CONFIG_ADFS_FS_RW is not set CONFIG_AFFS_FS=m @@ -1457,6 +1495,7 @@ CONFIG_BEFS_FS=m CONFIG_BFS_FS=m CONFIG_EFS_FS=m CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set CONFIG_VXFS_FS=m # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1558,6 +1597,7 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1609,6 +1649,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1618,6 +1659,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1626,6 +1669,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set @@ -1700,7 +1744,7 @@ CONFIG_CRYPTO_HMAC=y # # Digest # -# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig index 8769359dfe6..f95961c04a2 100644 --- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig +++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:14 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:13 2009 # # CONFIG_PPC64 is not set @@ -21,7 +21,9 @@ CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set @@ -45,7 +47,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +77,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -115,7 +117,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -125,13 +126,11 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,6 +147,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -187,6 +190,7 @@ CONFIG_PPC_I8259=y # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -225,12 +229,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -255,6 +261,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -278,6 +285,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -334,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -349,8 +358,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -397,6 +407,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -439,6 +450,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -498,6 +510,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -542,6 +557,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -564,6 +580,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -634,8 +654,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -672,11 +694,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -686,14 +708,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set - -# -# Voltage and Current regulators -# # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -749,9 +764,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -783,6 +802,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -816,10 +836,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -828,6 +845,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -878,6 +896,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -927,6 +946,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -936,6 +956,8 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -944,11 +966,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -974,6 +998,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig index bfe3c973157..e68e80987aa 100644 --- a/arch/powerpc/configs/85xx/sbc8548_defconfig +++ b/arch/powerpc/configs/85xx/sbc8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:16 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:15 2009 # # CONFIG_PPC64 is not set @@ -21,7 +21,9 @@ CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set @@ -45,7 +47,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +77,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -113,7 +115,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,13 +124,11 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -146,6 +145,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -185,6 +188,7 @@ CONFIG_MPIC=y # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -222,12 +226,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -251,6 +257,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -274,6 +281,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -330,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -345,8 +354,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -391,6 +401,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -439,6 +450,9 @@ CONFIG_PHYLIB=y CONFIG_BROADCOM_PHY=y # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -483,6 +497,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -505,6 +520,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -575,8 +594,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -613,11 +634,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -627,14 +648,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set - -# -# Voltage and Current regulators -# # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -693,6 +707,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -726,10 +741,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -738,6 +750,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -776,6 +789,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -807,6 +821,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -814,6 +830,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -831,6 +848,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig index 8c507f8d15a..b1c766ef7e2 100644 --- a/arch/powerpc/configs/85xx/sbc8560_defconfig +++ b/arch/powerpc/configs/85xx/sbc8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:17 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:17 2009 # # CONFIG_PPC64 is not set @@ -21,7 +21,9 @@ CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set @@ -45,7 +47,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +77,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -113,7 +115,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,13 +124,11 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -146,6 +145,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -185,6 +188,7 @@ CONFIG_MPIC=y # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -222,12 +226,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -268,6 +274,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -324,6 +331,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -339,8 +347,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -378,6 +387,7 @@ CONFIG_BLK_DEV_RAM_SIZE=32768 CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -413,6 +423,9 @@ CONFIG_PHYLIB=y CONFIG_BROADCOM_PHY=y # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -435,6 +448,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -500,8 +517,10 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -530,11 +549,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -544,14 +563,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set - -# -# Voltage and Current regulators -# # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -604,9 +616,13 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -666,6 +682,7 @@ CONFIG_RTC_DRV_M48T59=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -699,10 +716,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -711,6 +725,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -761,6 +776,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -809,6 +825,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -818,6 +835,8 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -826,11 +845,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -867,6 +888,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig index 5a0cf58d2b8..eb4ba7a5f41 100644 --- a/arch/powerpc/configs/85xx/stx_gp3_defconfig +++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:19 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:18 2009 # # CONFIG_PPC64 is not set @@ -21,7 +21,9 @@ CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set @@ -46,7 +48,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -76,12 +78,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -116,7 +118,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -128,18 +129,15 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -156,6 +154,10 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -196,6 +198,7 @@ CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -233,12 +236,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -263,6 +268,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -286,6 +292,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -400,6 +407,7 @@ CONFIG_IP_NF_FILTER=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -415,8 +423,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -470,14 +479,17 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -485,7 +497,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -510,6 +521,7 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -564,6 +576,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -580,6 +593,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -640,6 +655,9 @@ CONFIG_MARVELL_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -686,6 +704,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -708,6 +727,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -805,11 +828,13 @@ CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 CONFIG_PRINTER=m # CONFIG_LP_CONSOLE is not set # CONFIG_PPDEV is not set +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m # CONFIG_NVRAM is not set @@ -823,6 +848,7 @@ CONFIG_I2C=m CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=m CONFIG_I2C_HELPER_AUTO=y +CONFIG_I2C_ALGOBIT=m # # I2C Hardware Bus support @@ -877,13 +903,12 @@ CONFIG_I2C_HELPER_AUTO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -898,6 +923,11 @@ CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set # +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# # I2C GPIO expanders: # # CONFIG_GPIO_MAX732X is not set @@ -924,8 +954,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -946,6 +978,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -972,11 +1005,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -985,17 +1018,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1061,9 +1089,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1096,6 +1128,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1135,10 +1168,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1147,6 +1177,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=m +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1227,6 +1258,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=m @@ -1278,6 +1310,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1287,6 +1320,8 @@ CONFIG_SCHED_DEBUG=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1295,11 +1330,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1325,6 +1362,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig index f3e4f3481fd..f4379b1cf84 100644 --- a/arch/powerpc/configs/85xx/tqm8540_defconfig +++ b/arch/powerpc/configs/85xx/tqm8540_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:20 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:19 2009 # # CONFIG_PPC64 is not set @@ -21,7 +21,9 @@ CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set @@ -45,7 +47,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +77,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -113,7 +115,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -123,13 +124,11 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -146,6 +145,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -186,6 +189,7 @@ CONFIG_MPIC=y # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -223,12 +227,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -252,6 +258,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_HAS_RAPIDIO is not set # @@ -273,6 +280,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -329,6 +337,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -344,8 +353,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -435,6 +445,12 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -464,8 +480,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -508,6 +526,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -567,6 +586,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -590,7 +612,6 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -600,6 +621,7 @@ CONFIG_E100=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -629,6 +651,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -651,6 +674,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -721,8 +748,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -787,8 +816,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -814,8 +843,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -836,6 +867,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -862,11 +894,11 @@ CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -875,18 +907,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -942,9 +969,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -976,6 +1007,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1009,10 +1041,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1032,6 +1061,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1082,6 +1112,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1117,6 +1148,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1124,6 +1157,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1141,6 +1175,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig index c6248939453..b8669231c1f 100644 --- a/arch/powerpc/configs/85xx/tqm8541_defconfig +++ b/arch/powerpc/configs/85xx/tqm8541_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:21 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:20 2009 # # CONFIG_PPC64 is not set @@ -21,7 +21,9 @@ CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set @@ -46,7 +48,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -76,12 +78,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -114,7 +116,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -125,13 +126,11 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,6 +147,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -189,6 +192,7 @@ CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -226,12 +230,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -255,6 +261,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_HAS_RAPIDIO is not set # @@ -276,6 +283,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -332,6 +340,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -347,8 +356,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -438,6 +448,12 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -468,8 +484,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -512,6 +530,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -571,6 +590,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -594,7 +616,6 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -604,6 +625,7 @@ CONFIG_E100=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -634,6 +656,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -656,6 +679,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -728,8 +755,10 @@ CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -796,13 +825,12 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -816,6 +844,11 @@ CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set # +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# # I2C GPIO expanders: # # CONFIG_GPIO_MAX732X is not set @@ -842,8 +875,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -864,6 +899,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -890,11 +926,11 @@ CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -903,18 +939,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -970,9 +1002,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1004,6 +1040,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1037,10 +1074,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1060,6 +1094,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1110,6 +1145,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1145,6 +1181,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1152,6 +1190,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1169,6 +1208,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig index eef45b97dc3..0bc45975911 100644 --- a/arch/powerpc/configs/85xx/tqm8548_defconfig +++ b/arch/powerpc/configs/85xx/tqm8548_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:22 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:20 2009 # # CONFIG_PPC64 is not set @@ -21,7 +21,9 @@ CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set @@ -45,7 +47,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +77,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -115,7 +117,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -126,7 +127,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -134,11 +134,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -155,6 +153,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -195,6 +197,7 @@ CONFIG_MPIC=y # CONFIG_CPM2 is not set # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -233,12 +236,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -265,6 +270,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -288,6 +294,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -344,6 +351,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -359,8 +367,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -383,6 +392,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -465,6 +475,12 @@ CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # CONFIG_MTD_UBI=m @@ -502,8 +518,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -546,6 +564,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -605,6 +624,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -649,6 +671,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -671,6 +694,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -741,8 +768,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -806,8 +835,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -833,8 +862,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -855,6 +886,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -881,11 +913,11 @@ CONFIG_SENSORS_LM75=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -894,18 +926,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -961,9 +988,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1001,6 +1032,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1048,6 +1080,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1081,10 +1114,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1095,6 +1125,7 @@ CONFIG_TMPFS=y # CONFIG_JFFS2_FS is not set # CONFIG_UBIFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1145,6 +1176,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1194,6 +1226,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1203,6 +1236,8 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1211,11 +1246,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1241,6 +1278,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig index 11b637e99a5..d5a864d7446 100644 --- a/arch/powerpc/configs/85xx/tqm8555_defconfig +++ b/arch/powerpc/configs/85xx/tqm8555_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:23 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:21 2009 # # CONFIG_PPC64 is not set @@ -21,7 +21,9 @@ CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set @@ -46,7 +48,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -76,12 +78,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -114,7 +116,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -125,13 +126,11 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,6 +147,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -189,6 +192,7 @@ CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -226,12 +230,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -255,6 +261,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_HAS_RAPIDIO is not set # @@ -276,6 +283,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -332,6 +340,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -347,8 +356,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -438,6 +448,12 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -468,8 +484,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -512,6 +530,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -571,6 +590,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -594,7 +616,6 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -604,6 +625,7 @@ CONFIG_E100=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -634,6 +656,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -656,6 +679,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -728,8 +755,10 @@ CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -796,13 +825,12 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -816,6 +844,11 @@ CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set # +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# # I2C GPIO expanders: # # CONFIG_GPIO_MAX732X is not set @@ -842,8 +875,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -864,6 +899,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -890,11 +926,11 @@ CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -903,18 +939,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -970,9 +1002,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1004,6 +1040,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1037,10 +1074,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1060,6 +1094,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1110,6 +1145,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1145,6 +1181,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1152,6 +1190,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1169,6 +1208,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig index 2519169b6d4..a25009174f3 100644 --- a/arch/powerpc/configs/85xx/tqm8560_defconfig +++ b/arch/powerpc/configs/85xx/tqm8560_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:25 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:22 2009 # # CONFIG_PPC64 is not set @@ -21,7 +21,9 @@ CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set @@ -46,7 +48,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -76,12 +78,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -114,7 +116,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -125,13 +126,11 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -148,6 +147,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -189,6 +192,7 @@ CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -226,12 +230,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -255,6 +261,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_HAS_RAPIDIO is not set # @@ -276,6 +283,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -332,6 +340,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -347,8 +356,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -438,6 +448,12 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -468,8 +484,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -512,6 +530,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -571,6 +590,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -594,7 +616,6 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -604,6 +625,7 @@ CONFIG_E100=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -634,6 +656,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -656,6 +679,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -728,8 +755,10 @@ CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -796,13 +825,12 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -816,6 +844,11 @@ CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set # +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# # I2C GPIO expanders: # # CONFIG_GPIO_MAX732X is not set @@ -842,8 +875,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -864,6 +899,7 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -890,11 +926,11 @@ CONFIG_HWMON_DEBUG_CHIP=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -903,18 +939,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -970,9 +1002,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1004,6 +1040,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1037,10 +1074,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1060,6 +1094,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1110,6 +1145,7 @@ CONFIG_PARTITION_ADVANCED=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1145,6 +1181,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1152,6 +1190,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1169,6 +1208,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig index 391874c7b43..1ab5abae00a 100644 --- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig +++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:30 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:26 2009 # # CONFIG_PPC64 is not set @@ -42,11 +42,12 @@ CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -78,12 +79,12 @@ CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y @@ -117,7 +118,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -129,7 +129,6 @@ CONFIG_USE_GENERIC_SMP_HELPERS=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -137,12 +136,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -159,6 +156,10 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -197,6 +198,7 @@ CONFIG_MPIC=y # CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -215,7 +217,6 @@ CONFIG_SCHED_HRTICK=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set @@ -225,6 +226,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -237,12 +239,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -270,6 +274,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_HAS_RAPIDIO=y @@ -293,6 +298,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -502,6 +508,7 @@ CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m +# CONFIG_NET_SCH_DRR is not set # # Classification @@ -522,6 +529,7 @@ CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_CLS_ACT is not set # CONFIG_NET_CLS_IND is not set CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set # # Network testing @@ -538,8 +546,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -562,6 +571,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set @@ -638,10 +648,17 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -668,8 +685,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -729,6 +748,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -848,6 +869,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -902,6 +926,10 @@ CONFIG_GIANFAR=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -924,6 +952,7 @@ CONFIG_ATM_DRIVERS=y # CONFIG_ATM_IA is not set # CONFIG_ATM_FORE200E is not set # CONFIG_ATM_HE is not set +# CONFIG_ATM_SOLOS is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PPP=m @@ -1016,7 +1045,9 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -1055,6 +1086,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -1081,8 +1113,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # CONFIG_DS1682=y -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -1095,7 +1127,31 @@ CONFIG_DS1682=y # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -1108,8 +1164,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1130,6 +1188,7 @@ CONFIG_HWMON=y CONFIG_SENSORS_LM90=y CONFIG_SENSORS_LM92=y # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -1163,8 +1222,8 @@ CONFIG_WATCHDOG=y # # CONFIG_SOFT_WATCHDOG is not set # CONFIG_ALIM7101_WDT is not set -# CONFIG_8xxx_WDT is not set CONFIG_GEF_WDT=y +# CONFIG_8xxx_WDT is not set # # PCI-based Watchdog Cards @@ -1176,11 +1235,11 @@ CONFIG_GEF_WDT=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -1189,18 +1248,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1260,11 +1315,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -1272,12 +1325,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set CONFIG_THRUSTMASTER_FF=m CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y @@ -1310,6 +1366,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set # CONFIG_USB_EHCI_HCD_PPC_OF is not set +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1332,18 +1389,17 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1391,6 +1447,11 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_VST is not set # CONFIG_USB_ATM is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1478,6 +1539,7 @@ CONFIG_FS_POSIX_ACL=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1514,10 +1576,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1527,6 +1586,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1613,6 +1673,7 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1663,6 +1724,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1672,6 +1734,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1681,11 +1745,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1706,6 +1772,7 @@ CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set +# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set # CONFIG_SECURITY_ROOTPLUG is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 @@ -1716,11 +1783,16 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig index 72854a10dfa..bbdf4bfc432 100644 --- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig +++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:28 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:24 2009 # # CONFIG_PPC64 is not set @@ -44,7 +44,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +75,12 @@ CONFIG_SYSVIPC_SYSCTL=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -115,7 +115,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -126,7 +125,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -134,11 +132,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -155,6 +151,10 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -194,6 +194,7 @@ CONFIG_MPIC=y # CONFIG_QUICC_ENGINE is not set CONFIG_FSL_ULI1575=y # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -213,7 +214,6 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_IOMMU_HELPER is not set @@ -221,6 +221,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -232,12 +233,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=12 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -265,6 +268,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -287,6 +291,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -360,6 +365,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -375,8 +381,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -401,6 +408,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_OF_PARTS is not set @@ -481,6 +489,12 @@ CONFIG_MTD_NAND_FSL_ELBC=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -510,8 +524,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -524,7 +540,6 @@ CONFIG_IDE_GD_ATA=y # CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -549,6 +564,7 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -618,6 +634,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -757,6 +775,10 @@ CONFIG_ULI526X=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -841,7 +863,9 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -905,8 +929,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -926,11 +950,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -939,18 +963,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1029,6 +1048,7 @@ CONFIG_FB_FSL_DIU=y # CONFIG_FB_IBM_GXT4500 is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1054,6 +1074,7 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y @@ -1130,6 +1151,7 @@ CONFIG_SND_PPC=y CONFIG_SND_SOC=y CONFIG_SND_SOC_MPC8610=y CONFIG_SND_SOC_MPC8610_HPCD=y +CONFIG_SND_SOC_I2C_AND_SPI=y # CONFIG_SND_SOC_ALL_CODECS is not set CONFIG_SND_SOC_CS4270=y CONFIG_SND_SOC_CS4270_VD33_ERRATA=y @@ -1157,9 +1179,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1197,6 +1223,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1244,6 +1271,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -1276,10 +1304,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1289,6 +1314,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1388,6 +1414,7 @@ CONFIG_NLS_DEFAULT="iso8859-1" # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1438,6 +1465,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1447,6 +1475,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1455,11 +1485,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1486,6 +1518,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig index 41220ece603..92acfdf3540 100644 --- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig +++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:29 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:25 2009 # # CONFIG_PPC64 is not set @@ -45,7 +45,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -78,12 +78,12 @@ CONFIG_AUDIT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -96,6 +96,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -118,7 +119,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -130,7 +130,6 @@ CONFIG_USE_GENERIC_SMP_HELPERS=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -138,12 +137,10 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -160,6 +157,10 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -198,6 +199,7 @@ CONFIG_PPC_I8259=y # CONFIG_QUICC_ENGINE is not set CONFIG_FSL_ULI1575=y # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -225,6 +227,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set # CONFIG_IRQ_ALL_CPUS is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -237,12 +240,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -268,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_HAS_RAPIDIO=y @@ -291,6 +297,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -379,6 +386,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -395,8 +403,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -445,8 +454,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -490,6 +501,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -506,6 +518,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -625,6 +639,9 @@ CONFIG_VITESSE_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -670,6 +687,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -694,6 +712,10 @@ CONFIG_NETDEV_10000=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -785,8 +807,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y @@ -851,8 +875,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=y +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -872,11 +896,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -885,18 +909,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -923,6 +942,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m +# CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -968,6 +988,12 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_FE_CUSTOMISE is not set # +# Multistandard (satellite) frontends +# +# CONFIG_DVB_STB0899 is not set +# CONFIG_DVB_STB6100 is not set + +# # DVB-S (satellite) frontends # # CONFIG_DVB_CX24110 is not set @@ -979,8 +1005,10 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_TDA8261 is not set # CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TUNER_CX24113 is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TUA6100 is not set # CONFIG_DVB_CX24116 is not set @@ -1021,11 +1049,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_OR51132 is not set # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set +# CONFIG_DVB_LGDT3304 is not set # CONFIG_DVB_S5H1409 is not set # CONFIG_DVB_AU8522 is not set # CONFIG_DVB_S5H1411 is not set # +# ISDB-T (terrestrial) frontends +# +# CONFIG_DVB_S921 is not set + +# # Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set @@ -1078,6 +1112,7 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y @@ -1180,11 +1215,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -1192,12 +1225,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set CONFIG_THRUSTMASTER_FF=m CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y @@ -1230,6 +1266,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1255,18 +1292,17 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1314,6 +1350,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1351,6 +1391,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1397,7 +1438,9 @@ CONFIG_FS_MBCACHE=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1439,10 +1482,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y CONFIG_ADFS_FS=m # CONFIG_ADFS_FS_RW is not set CONFIG_AFFS_FS=m @@ -1453,6 +1493,7 @@ CONFIG_BEFS_FS=m CONFIG_BFS_FS=m CONFIG_EFS_FS=m CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set CONFIG_VXFS_FS=m # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1554,6 +1595,7 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1605,6 +1647,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1614,6 +1657,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1622,11 +1667,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1653,11 +1700,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1691,7 +1742,7 @@ CONFIG_CRYPTO_HMAC=y # # Digest # -# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig index a4342862f6e..04797e730c5 100644 --- a/arch/powerpc/configs/86xx/sbc8641d_defconfig +++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:40:26 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:36:23 2009 # # CONFIG_PPC64 is not set @@ -46,7 +46,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -78,12 +78,12 @@ CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y CONFIG_RELAY=y @@ -117,7 +117,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -129,7 +128,6 @@ CONFIG_USE_GENERIC_SMP_HELPERS=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -137,12 +135,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -159,6 +155,10 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -197,6 +197,7 @@ CONFIG_MPIC=y # CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -215,7 +216,6 @@ CONFIG_SCHED_HRTICK=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set @@ -225,6 +225,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_IRQ_ALL_CPUS=y CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -237,12 +238,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -270,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -292,6 +296,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -501,6 +506,7 @@ CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m +# CONFIG_NET_SCH_DRR is not set # # Classification @@ -521,6 +527,7 @@ CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_CLS_ACT is not set # CONFIG_NET_CLS_IND is not set CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set # # Network testing @@ -537,8 +544,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -561,6 +569,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set @@ -637,6 +646,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -666,8 +681,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -734,6 +751,9 @@ CONFIG_PHYLIB=y CONFIG_BROADCOM_PHY=y # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -786,6 +806,10 @@ CONFIG_GIANFAR=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set CONFIG_ATM_DRIVERS=y # CONFIG_ATM_DUMMY is not set @@ -801,6 +825,7 @@ CONFIG_ATM_DRIVERS=y # CONFIG_ATM_IA is not set # CONFIG_ATM_FORE200E is not set # CONFIG_ATM_HE is not set +# CONFIG_ATM_SOLOS is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set CONFIG_PPP=m @@ -892,8 +917,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m # CONFIG_NVRAM is not set @@ -958,8 +985,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -985,8 +1012,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1007,6 +1036,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -1047,11 +1077,11 @@ CONFIG_SOFT_WATCHDOG=m # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -1060,18 +1090,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1134,9 +1159,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1182,11 +1211,18 @@ CONFIG_OCFS2_FS_O2CB=m CONFIG_OCFS2_FS_STATS=y CONFIG_OCFS2_DEBUG_MASKLOG=y # CONFIG_OCFS2_DEBUG_FS is not set -# CONFIG_OCFS2_COMPAT_JBD is not set +# CONFIG_OCFS2_FS_POSIX_ACL is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set +CONFIG_QUOTA=y +# CONFIG_QUOTA_NETLINK_INTERFACE is not set +CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=m +# CONFIG_QFMT_V1 is not set +# CONFIG_QFMT_V2 is not set +CONFIG_QUOTACTL=y CONFIG_AUTOFS_FS=m CONFIG_AUTOFS4_FS=m # CONFIG_FUSE_FS is not set @@ -1216,10 +1252,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1229,6 +1262,7 @@ CONFIG_CONFIGFS_FS=m # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set CONFIG_MINIX_FS=m # CONFIG_OMFS_FS is not set @@ -1317,6 +1351,7 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1367,6 +1402,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1376,6 +1412,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1385,11 +1423,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1411,6 +1451,7 @@ CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set +# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_CRYPTO=y @@ -1420,11 +1461,16 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig index 024f279af90..aaab5cc3751 100644 --- a/arch/powerpc/configs/adder875_defconfig +++ b/arch/powerpc/configs/adder875_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:32 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:24 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_8xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_8xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -40,7 +41,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -71,12 +72,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -109,7 +110,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -119,13 +119,11 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -142,6 +140,10 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -187,6 +189,7 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -205,12 +208,12 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_8XX_MINIMAL_FPEMU is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -225,12 +228,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +277,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -323,6 +329,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -338,8 +345,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -428,6 +436,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -470,6 +484,9 @@ CONFIG_DAVICOM_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -495,6 +512,10 @@ CONFIG_FS_ENET_MDIO_FEC=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -580,7 +601,9 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -598,11 +621,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -612,14 +635,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set - -# -# Voltage and Current regulators -# # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -674,6 +690,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -706,10 +723,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -719,6 +733,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -774,6 +789,7 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -821,6 +837,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -829,6 +846,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -837,11 +856,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig index 5078594cd1f..5103319a7f5 100644 --- a/arch/powerpc/configs/c2k_defconfig +++ b/arch/powerpc/configs/c2k_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:34 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:26 2009 # # CONFIG_PPC64 is not set @@ -45,7 +45,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -78,12 +78,12 @@ CONFIG_AUDITSYSCALL=y CONFIG_AUDIT_TREE=y # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -122,6 +122,7 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y @@ -135,7 +136,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -143,11 +143,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -164,6 +162,10 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -221,6 +223,7 @@ CONFIG_CPU_FREQ_GOV_ONDEMAND=m # # CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -243,10 +246,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -258,12 +263,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -287,6 +294,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y CONFIG_PCI_MSI=y # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set CONFIG_HOTPLUG_PCI=y # CONFIG_HOTPLUG_PCI_FAKE is not set @@ -314,6 +322,8 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NET_NS is not set +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -574,6 +584,7 @@ CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m +# CONFIG_NET_SCH_DRR is not set # # Classification @@ -594,6 +605,7 @@ CONFIG_NET_CLS_RSVP6=m # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set # # Network testing @@ -616,8 +628,6 @@ CONFIG_BT_HIDP=m # # Bluetooth device drivers # -CONFIG_BT_HCIUSB=m -CONFIG_BT_HCIUSB_SCO=y # CONFIG_BT_HCIBTUSB is not set CONFIG_BT_HCIUART=m CONFIG_BT_HCIUART_H4=y @@ -635,12 +645,9 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -665,6 +672,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=m CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -737,6 +745,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -834,6 +848,8 @@ CONFIG_MEGARAID_MAILBOX=m CONFIG_MEGARAID_SAS=m # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set CONFIG_SCSI_FUTURE_DOMAIN=m @@ -852,6 +868,7 @@ CONFIG_SCSI_QLOGIC_1280=m # CONFIG_SCSI_QLA_FC is not set # CONFIG_SCSI_QLA_ISCSI is not set CONFIG_SCSI_LPFC=m +# CONFIG_SCSI_LPFC_DEBUG_FS is not set # CONFIG_SCSI_DC395x is not set # CONFIG_SCSI_DC390T is not set # CONFIG_SCSI_NSP32 is not set @@ -896,6 +913,9 @@ CONFIG_VITESSE_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -949,6 +969,10 @@ CONFIG_MV643XX_ETH=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -1055,7 +1079,9 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m CONFIG_NVRAM=m @@ -1124,8 +1150,8 @@ CONFIG_I2C_MV64XXX=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=m +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=m CONFIG_SENSORS_PCF8574=m # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -1151,8 +1177,10 @@ CONFIG_SENSORS_ADM1026=m # CONFIG_SENSORS_ADM1029 is not set CONFIG_SENSORS_ADM1031=m # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set CONFIG_SENSORS_DS1621=m # CONFIG_SENSORS_I5K_AMB is not set @@ -1173,6 +1201,7 @@ CONFIG_SENSORS_LM87=m CONFIG_SENSORS_LM90=m # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set CONFIG_SENSORS_MAX1619=m # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -1218,11 +1247,11 @@ CONFIG_WDT_501_PCI=y # USB-based Watchdog Cards # CONFIG_USBPCWATCHDOG=m +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -1234,14 +1263,8 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1298,7 +1321,7 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_SUSPEND=y # CONFIG_USB_OTG is not set -CONFIG_USB_MON=y +CONFIG_USB_MON=m # CONFIG_USB_WUSB is not set # CONFIG_USB_WUSB_CBAF is not set @@ -1310,6 +1333,7 @@ CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m @@ -1339,18 +1363,17 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y CONFIG_USB_STORAGE_ISD200=y -CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y @@ -1419,12 +1442,14 @@ CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_SERIAL_HP4X is not set CONFIG_USB_SERIAL_SAFE=m CONFIG_USB_SERIAL_SAFE_PADDED=y +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_TI is not set CONFIG_USB_SERIAL_CYBERJACK=m CONFIG_USB_SERIAL_XIRCOM=m # CONFIG_USB_SERIAL_OPTION is not set CONFIG_USB_SERIAL_OMNINET=m +# CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_DEBUG is not set # @@ -1458,6 +1483,10 @@ CONFIG_USB_SPEEDTOUCH=m # CONFIG_USB_UEAGLEATM is not set # CONFIG_USB_XUSBATM is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1500,19 +1529,23 @@ CONFIG_EXT3_FS_POSIX_ACL=y CONFIG_EXT3_FS_SECURITY=y # CONFIG_EXT4_FS is not set CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set CONFIG_FS_POSIX_ACL=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y CONFIG_QUOTA=y # CONFIG_QUOTA_NETLINK_INTERFACE is not set CONFIG_PRINT_QUOTA_WARNING=y +CONFIG_QUOTA_TREE=y # CONFIG_QFMT_V1 is not set CONFIG_QFMT_V2=y CONFIG_QUOTACTL=y @@ -1549,10 +1582,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_ECRYPT_FS is not set @@ -1573,6 +1603,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=m +# CONFIG_SQUASHFS is not set CONFIG_VXFS_FS=m # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1678,6 +1709,7 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=m @@ -1703,7 +1735,7 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set @@ -1722,6 +1754,7 @@ CONFIG_DEBUG_SPINLOCK=y # CONFIG_DEBUG_MUTEXES is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_HIGHMEM=y CONFIG_DEBUG_BUGVERBOSE=y @@ -1731,6 +1764,7 @@ CONFIG_DEBUG_INFO=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1741,7 +1775,12 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y # # Tracers @@ -1750,11 +1789,14 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_DEBUG_PAGEALLOC is not set @@ -1763,6 +1805,7 @@ CONFIG_DEBUG_STACK_USAGE=y # CONFIG_MSI_BITMAP_SELFTEST is not set # CONFIG_XMON is not set # CONFIG_IRQSTACKS is not set +# CONFIG_VIRQ_DEBUG is not set # CONFIG_BDI_SWITCH is not set CONFIG_BOOTX_TEXT=y # CONFIG_PPC_EARLY_DEBUG is not set @@ -1776,6 +1819,7 @@ CONFIG_SECURITY=y # CONFIG_SECURITYFS is not set CONFIG_SECURITY_NETWORK=y # CONFIG_SECURITY_NETWORK_XFRM is not set +# CONFIG_SECURITY_PATH is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0 CONFIG_SECURITY_SELINUX=y @@ -1785,7 +1829,6 @@ CONFIG_SECURITY_SELINUX_DISABLE=y CONFIG_SECURITY_SELINUX_DEVELOP=y CONFIG_SECURITY_SELINUX_AVC_STATS=y CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1 -# CONFIG_SECURITY_SELINUX_ENABLE_SECMARK_DEFAULT is not set # CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set CONFIG_CRYPTO=y @@ -1794,11 +1837,16 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD=m +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/cell_defconfig b/arch/powerpc/configs/cell_defconfig index c420e47426f..c6d2baa7aae 100644 --- a/arch/powerpc/configs/cell_defconfig +++ b/arch/powerpc/configs/cell_defconfig @@ -1012,7 +1012,7 @@ CONFIG_I2C_ALGOBIT=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/powerpc/configs/celleb_defconfig b/arch/powerpc/configs/celleb_defconfig index 9ba3c6fc2fe..d2123779512 100644 --- a/arch/powerpc/configs/celleb_defconfig +++ b/arch/powerpc/configs/celleb_defconfig @@ -834,7 +834,7 @@ CONFIG_I2C_ALGOBIT=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/powerpc/configs/chrp32_defconfig b/arch/powerpc/configs/chrp32_defconfig index 63b3c2372ce..5094a65a449 100644 --- a/arch/powerpc/configs/chrp32_defconfig +++ b/arch/powerpc/configs/chrp32_defconfig @@ -941,8 +941,8 @@ CONFIG_I2C_ALGOBIT=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig index a6f1cff564e..add6419c15d 100644 --- a/arch/powerpc/configs/ep8248e_defconfig +++ b/arch/powerpc/configs/ep8248e_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:36 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:27 2009 # # CONFIG_PPC64 is not set @@ -44,7 +44,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -86,6 +86,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -107,7 +108,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -118,13 +118,11 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -140,6 +138,10 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -181,6 +183,7 @@ CONFIG_8272=y CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -206,6 +209,7 @@ CONFIG_BINFMT_MISC=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y @@ -213,12 +217,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -243,6 +249,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -265,6 +272,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -346,6 +354,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -360,8 +369,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # @@ -455,6 +465,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -522,9 +538,12 @@ CONFIG_DAVICOM_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=y -# CONFIG_MDIO_OF_GPIO is not set +# CONFIG_MDIO_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set @@ -569,6 +588,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -591,6 +611,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PPP is not set @@ -633,6 +657,7 @@ CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -651,6 +676,11 @@ CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set # +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# # I2C GPIO expanders: # @@ -668,11 +698,11 @@ CONFIG_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -682,14 +712,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set - -# -# Voltage and Current regulators -# # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -782,13 +805,11 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_HFSPLUS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -877,6 +898,7 @@ CONFIG_NLS_UTF8=y # # Library routines # +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -924,6 +946,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -933,6 +956,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -941,10 +966,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -971,11 +998,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig index 870d28976a4..b2fdfd9e183 100644 --- a/arch/powerpc/configs/ep88xc_defconfig +++ b/arch/powerpc/configs/ep88xc_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:37 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:28 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_8xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_8xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -40,7 +41,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -70,12 +71,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -108,7 +109,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -118,13 +118,11 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -141,6 +139,10 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -186,6 +188,7 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -205,12 +208,12 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set CONFIG_8XX_MINIMAL_FPEMU=y # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -225,12 +228,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -272,6 +277,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -323,6 +329,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -338,8 +345,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -428,6 +436,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -470,6 +484,9 @@ CONFIG_LXT_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -495,6 +512,10 @@ CONFIG_FS_ENET_MDIO_FEC=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -536,7 +557,9 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -555,11 +578,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -569,14 +592,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set - -# -# Voltage and Current regulators -# # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -630,6 +646,7 @@ CONFIG_DAB=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -662,10 +679,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -675,6 +689,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -730,6 +745,7 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -777,6 +793,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -785,6 +802,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -793,11 +812,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set diff --git a/arch/powerpc/configs/g5_defconfig b/arch/powerpc/configs/g5_defconfig index f85e71ccb98..fc905924c02 100644 --- a/arch/powerpc/configs/g5_defconfig +++ b/arch/powerpc/configs/g5_defconfig @@ -994,8 +994,8 @@ CONFIG_I2C_POWERMAC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig index 54fa6248137..aa5855a156d 100644 --- a/arch/powerpc/configs/linkstation_defconfig +++ b/arch/powerpc/configs/linkstation_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:38 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:29 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -74,12 +74,12 @@ CONFIG_POSIX_MQUEUE=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -118,7 +118,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -129,7 +128,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -137,11 +135,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -158,6 +154,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -200,6 +200,7 @@ CONFIG_MPIC=y # CONFIG_TAU is not set # CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -227,6 +228,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -238,12 +240,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -267,6 +271,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -289,6 +294,8 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NET_NS is not set +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -455,6 +462,7 @@ CONFIG_IP_NF_ARP_MANGLE=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -471,12 +479,9 @@ CONFIG_WIRELESS=y CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -CONFIG_IEEE80211=m -CONFIG_IEEE80211_DEBUG=y -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -501,6 +506,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set CONFIG_MTD_CONCAT=y CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set @@ -554,9 +560,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0xffc00000 -CONFIG_MTD_PHYSMAP_LEN=0x400000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_PHYSMAP_OF is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -580,6 +584,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -610,8 +620,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -654,6 +666,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -670,6 +683,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -827,6 +842,7 @@ CONFIG_R8169=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -851,6 +867,10 @@ CONFIG_NETDEV_10000=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -949,8 +969,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -1015,8 +1037,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=m +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=m # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -1042,8 +1064,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -1064,6 +1088,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -1090,11 +1115,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -1103,18 +1128,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1165,12 +1185,6 @@ CONFIG_HID=m # CONFIG_HID_PID is not set # -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set - -# # Special HID drivers # CONFIG_HID_COMPAT=y @@ -1202,6 +1216,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1227,18 +1242,17 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1295,12 +1309,14 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_SERIAL_SPCP8X5 is not set # CONFIG_USB_SERIAL_HP4X is not set # CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_SIEMENS_MPI is not set # CONFIG_USB_SERIAL_SIERRAWIRELESS is not set # CONFIG_USB_SERIAL_TI is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OPTION is not set # CONFIG_USB_SERIAL_OMNINET is not set +# CONFIG_USB_SERIAL_OPTICON is not set # CONFIG_USB_SERIAL_DEBUG is not set # @@ -1329,6 +1345,10 @@ CONFIG_USB_SERIAL_FTDI_SIO=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1366,6 +1386,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1417,6 +1438,7 @@ CONFIG_XFS_FS=m # CONFIG_XFS_RT is not set # CONFIG_XFS_DEBUG is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1458,10 +1480,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1471,6 +1490,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1561,6 +1581,7 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1614,6 +1635,7 @@ CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1623,6 +1645,8 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1631,11 +1655,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1662,11 +1688,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/maple_defconfig b/arch/powerpc/configs/maple_defconfig index 045f1b008ce..8b244003b9e 100644 --- a/arch/powerpc/configs/maple_defconfig +++ b/arch/powerpc/configs/maple_defconfig @@ -866,8 +866,8 @@ CONFIG_I2C_AMD8111=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig index 8d3c6232400..c58c38d5b7a 100644 --- a/arch/powerpc/configs/mgcoge_defconfig +++ b/arch/powerpc/configs/mgcoge_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:38 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:30 2009 # # CONFIG_PPC64 is not set @@ -44,7 +44,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -89,6 +89,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -111,7 +112,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -122,13 +122,11 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -144,6 +142,10 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -190,6 +192,7 @@ CONFIG_PPC_MPC106=y CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -215,6 +218,7 @@ CONFIG_BINFMT_MISC=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y @@ -222,12 +226,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -253,6 +259,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -275,6 +282,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -337,6 +345,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -351,8 +360,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # @@ -451,6 +461,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -522,6 +538,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -558,6 +577,10 @@ CONFIG_FS_ENET_HAS_SCC=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_PPP is not set @@ -601,6 +624,7 @@ CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_BRIQ_PANEL is not set @@ -621,6 +645,11 @@ CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set # +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# # I2C GPIO expanders: # @@ -638,11 +667,11 @@ CONFIG_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -652,14 +681,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set - -# -# Voltage and Current regulators -# # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -753,10 +775,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_HFSPLUS_FS is not set CONFIG_JFFS2_FS=y CONFIG_JFFS2_FS_DEBUG=0 @@ -768,6 +787,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -857,6 +877,7 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -905,6 +926,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -914,6 +936,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -922,10 +946,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -953,11 +979,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig index fbaa67f7b0e..297b5d5042b 100644 --- a/arch/powerpc/configs/mgsuvd_defconfig +++ b/arch/powerpc/configs/mgsuvd_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:39 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:32 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_8xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_8xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -40,7 +41,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -69,12 +70,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=17 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -106,7 +107,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -117,13 +117,11 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -140,6 +138,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -186,6 +188,7 @@ CONFIG_UCODE_PATCH=y # CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -209,6 +212,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -223,12 +227,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -269,6 +275,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -325,6 +332,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -340,8 +348,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -435,6 +444,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -489,6 +504,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -514,6 +532,10 @@ CONFIG_FS_ENET_HAS_SCC=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -555,7 +577,9 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -574,11 +598,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -588,14 +612,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set - -# -# Voltage and Current regulators -# # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -659,6 +676,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -692,10 +710,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -715,6 +730,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -771,6 +787,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -802,6 +819,8 @@ CONFIG_DEBUG_FS=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -809,6 +828,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_VIRQ_DEBUG is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -827,6 +847,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/mpc5200_defconfig b/arch/powerpc/configs/mpc5200_defconfig index 15c5604d0b2..5ff3de205d6 100644 --- a/arch/powerpc/configs/mpc5200_defconfig +++ b/arch/powerpc/configs/mpc5200_defconfig @@ -844,8 +844,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig index f80b1ca43af..38712e861c4 100644 --- a/arch/powerpc/configs/mpc7448_hpc2_defconfig +++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:40 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:33 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -73,12 +73,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -112,7 +112,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -122,13 +121,11 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -145,6 +142,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -184,6 +185,7 @@ CONFIG_MPIC_WEIRD=y # CONFIG_CPU_FREQ is not set # CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -211,6 +213,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -222,12 +225,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -249,6 +254,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -271,6 +277,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -327,6 +334,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -342,8 +350,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -388,6 +397,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -429,6 +439,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -445,6 +456,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -563,6 +576,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -586,7 +602,6 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -600,6 +615,7 @@ CONFIG_8139TOO=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -630,6 +646,7 @@ CONFIG_TSI108_ETH=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -652,6 +669,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -722,8 +743,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -760,11 +783,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -774,14 +797,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set - -# -# Voltage and Current regulators -# # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -837,9 +853,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -870,7 +890,9 @@ CONFIG_FS_MBCACHE=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -904,10 +926,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -916,6 +935,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -970,6 +990,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1003,6 +1024,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1010,6 +1033,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1028,6 +1052,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig index c8f5dec1b69..d85a43cb821 100644 --- a/arch/powerpc/configs/mpc8272_ads_defconfig +++ b/arch/powerpc/configs/mpc8272_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:41 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:35 2009 # # CONFIG_PPC64 is not set @@ -44,7 +44,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -86,6 +86,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -108,7 +109,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -119,13 +119,11 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -141,6 +139,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -183,6 +185,7 @@ CONFIG_PQ2_ADS_PCI_PIC=y CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -209,6 +212,7 @@ CONFIG_BINFMT_MISC=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y @@ -216,12 +220,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -246,6 +252,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -268,6 +275,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -349,6 +357,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -363,8 +372,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # @@ -459,6 +469,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -526,9 +542,12 @@ CONFIG_DAVICOM_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=y -# CONFIG_MDIO_OF_GPIO is not set +# CONFIG_MDIO_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set @@ -573,6 +592,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -595,6 +615,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set CONFIG_PPP=y @@ -690,6 +714,7 @@ CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -708,6 +733,11 @@ CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set # +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# # I2C GPIO expanders: # @@ -725,11 +755,11 @@ CONFIG_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -739,14 +769,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set - -# -# Voltage and Current regulators -# # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -843,13 +866,11 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_HFSPLUS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -940,6 +961,7 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -991,6 +1013,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1000,6 +1023,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1008,10 +1033,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1038,11 +1065,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig index d582014b0a3..45f03cad8db 100644 --- a/arch/powerpc/configs/mpc83xx_defconfig +++ b/arch/powerpc/configs/mpc83xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:42 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:36 2009 # # CONFIG_PPC64 is not set @@ -45,7 +45,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -77,12 +77,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -115,7 +115,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -126,7 +125,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -134,11 +132,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -155,6 +151,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -205,6 +205,8 @@ CONFIG_QUICC_ENGINE=y CONFIG_QE_GPIO=y # CONFIG_FSL_ULI1575 is not set # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set +# CONFIG_MCU_MPC8349EMITX is not set # # Kernel options @@ -232,6 +234,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -243,12 +246,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -275,6 +280,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -297,6 +303,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -353,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -368,8 +376,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -390,6 +399,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -472,6 +482,12 @@ CONFIG_MTD_NAND_FSL_ELBC=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -503,8 +519,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -547,6 +565,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -563,6 +582,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -682,6 +703,9 @@ CONFIG_VITESSE_PHY=y # CONFIG_BROADCOM_PHY is not set CONFIG_ICPLUS_PHY=y # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -722,7 +746,6 @@ CONFIG_NETDEV_1000=y CONFIG_GIANFAR=y CONFIG_UCC_GETH=y # CONFIG_UGETH_MAGIC_PACKET is not set -# CONFIG_UGETH_FILTERING is not set # CONFIG_UGETH_TX_ON_DEMAND is not set # CONFIG_MV643XX_ETH is not set # CONFIG_QLA3XXX is not set @@ -731,6 +754,7 @@ CONFIG_UCC_GETH=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -755,6 +779,10 @@ CONFIG_NETDEV_10000=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -833,8 +861,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -902,16 +932,14 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set -# CONFIG_MCU_MPC8349EMITX is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set @@ -923,6 +951,11 @@ CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set # +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# # I2C GPIO expanders: # # CONFIG_GPIO_MAX732X is not set @@ -949,8 +982,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -971,6 +1006,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -1016,11 +1052,11 @@ CONFIG_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -1029,18 +1065,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1093,11 +1125,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -1105,12 +1135,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set CONFIG_THRUSTMASTER_FF=m CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y @@ -1143,6 +1176,7 @@ CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set @@ -1161,11 +1195,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set @@ -1206,6 +1240,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1237,6 +1276,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1270,10 +1310,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1283,6 +1320,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1342,6 +1380,7 @@ CONFIG_UCC=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1373,6 +1412,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1380,6 +1421,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1398,11 +1440,16 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/mpc85xx_defconfig b/arch/powerpc/configs/mpc85xx_defconfig index c87b53abc61..fb08819d7cc 100644 --- a/arch/powerpc/configs/mpc85xx_defconfig +++ b/arch/powerpc/configs/mpc85xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:43 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:37 2009 # # CONFIG_PPC64 is not set @@ -21,7 +21,9 @@ CONFIG_FSL_BOOKE=y CONFIG_FSL_EMB_PERFMON=y # CONFIG_PHYS_64BIT is not set CONFIG_SPE=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set +# CONFIG_SMP is not set CONFIG_PPC32=y CONFIG_WORD_SIZE=32 # CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set @@ -46,7 +48,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -79,12 +81,12 @@ CONFIG_AUDIT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -97,6 +99,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -119,7 +122,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -131,7 +133,6 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -139,11 +140,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -160,6 +159,10 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -202,6 +205,7 @@ CONFIG_CPM2=y CONFIG_FSL_ULI1575=y CONFIG_CPM=y # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -240,12 +244,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -271,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -294,6 +301,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -382,6 +390,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -398,8 +407,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -449,8 +459,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -494,6 +506,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -510,6 +523,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -629,6 +644,9 @@ CONFIG_VITESSE_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -675,6 +693,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -699,6 +718,10 @@ CONFIG_NETDEV_10000=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -792,8 +815,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_OF_PLATFORM is not set # CONFIG_SERIAL_QE is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y @@ -860,13 +885,12 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=y +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -881,6 +905,11 @@ CONFIG_GPIOLIB=y # CONFIG_GPIO_SYSFS is not set # +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# # I2C GPIO expanders: # # CONFIG_GPIO_MAX732X is not set @@ -901,11 +930,11 @@ CONFIG_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -915,18 +944,14 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -953,6 +978,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m +# CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -998,6 +1024,12 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_FE_CUSTOMISE is not set # +# Multistandard (satellite) frontends +# +# CONFIG_DVB_STB0899 is not set +# CONFIG_DVB_STB6100 is not set + +# # DVB-S (satellite) frontends # # CONFIG_DVB_CX24110 is not set @@ -1009,8 +1041,10 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_TDA8261 is not set # CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TUNER_CX24113 is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TUA6100 is not set # CONFIG_DVB_CX24116 is not set @@ -1051,11 +1085,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_OR51132 is not set # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set +# CONFIG_DVB_LGDT3304 is not set # CONFIG_DVB_S5H1409 is not set # CONFIG_DVB_AU8522 is not set # CONFIG_DVB_S5H1411 is not set # +# ISDB-T (terrestrial) frontends +# +# CONFIG_DVB_S921 is not set + +# # Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set @@ -1108,6 +1148,7 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y @@ -1210,11 +1251,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -1222,12 +1261,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set CONFIG_THRUSTMASTER_FF=m CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y @@ -1260,6 +1302,7 @@ CONFIG_USB_EHCI_ROOT_HUB_TT=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_FSL=y CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1286,18 +1329,17 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1345,6 +1387,11 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1389,6 +1436,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1448,7 +1496,9 @@ CONFIG_FS_MBCACHE=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1490,10 +1540,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y CONFIG_ADFS_FS=m # CONFIG_ADFS_FS_RW is not set CONFIG_AFFS_FS=m @@ -1504,6 +1551,7 @@ CONFIG_BEFS_FS=m CONFIG_BFS_FS=m CONFIG_EFS_FS=m CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set CONFIG_VXFS_FS=m # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1605,6 +1653,7 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1656,6 +1705,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1665,6 +1715,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1673,11 +1725,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1704,11 +1758,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1742,7 +1800,7 @@ CONFIG_CRYPTO_HMAC=y # # Digest # -# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig index 8272b1ac71f..1793d08e9c0 100644 --- a/arch/powerpc/configs/mpc866_ads_defconfig +++ b/arch/powerpc/configs/mpc866_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:43 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:38 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_8xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_8xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -40,7 +41,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -69,12 +70,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -106,7 +107,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -117,13 +117,11 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -140,6 +138,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -185,6 +187,7 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -209,6 +212,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -223,12 +227,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 # CONFIG_PROC_DEVICETREE is not set # CONFIG_CMDLINE_BOOL is not set @@ -269,6 +275,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -325,6 +332,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -340,8 +348,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -372,6 +381,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -407,6 +417,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set CONFIG_FIXED_PHY=y # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -433,6 +446,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -518,7 +535,9 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -549,11 +568,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -563,14 +582,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set - -# -# Voltage and Current regulators -# # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -623,9 +635,13 @@ CONFIG_USB_SUPPORT=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -657,6 +673,7 @@ CONFIG_FS_MBCACHE=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -690,10 +707,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -702,6 +716,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -758,6 +773,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -790,6 +806,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -797,6 +815,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -814,6 +833,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig index 1736bbc281e..adc756e1f25 100644 --- a/arch/powerpc/configs/mpc86xx_defconfig +++ b/arch/powerpc/configs/mpc86xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:44 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:39 2009 # # CONFIG_PPC64 is not set @@ -41,11 +41,12 @@ CONFIG_ARCH_HAS_ILOG2_U32=y CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_FIND_NEXT_BIT=y +CONFIG_GENERIC_GPIO=y # CONFIG_ARCH_NO_VIRT_TO_BUS is not set CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -78,12 +79,12 @@ CONFIG_AUDIT=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -96,6 +97,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -118,7 +120,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -130,7 +131,6 @@ CONFIG_USE_GENERIC_SMP_HELPERS=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -138,12 +138,10 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -160,6 +158,10 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -199,6 +201,7 @@ CONFIG_PPC_I8259=y # CONFIG_QUICC_ENGINE is not set CONFIG_FSL_ULI1575=y # CONFIG_MPC8xxx_GPIO is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -226,6 +229,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set # CONFIG_IRQ_ALL_CPUS is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y @@ -238,12 +242,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -269,6 +275,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set CONFIG_HAS_RAPIDIO=y @@ -292,6 +299,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -380,6 +388,7 @@ CONFIG_SCTP_HMAC_MD5=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -396,8 +405,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -420,6 +430,7 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_CONNECTOR is not set # CONFIG_MTD is not set CONFIG_OF_DEVICE=y +CONFIG_OF_GPIO=y CONFIG_OF_I2C=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y @@ -446,8 +457,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -491,6 +504,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -507,6 +521,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -626,6 +642,9 @@ CONFIG_VITESSE_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -671,6 +690,7 @@ CONFIG_GIANFAR=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -695,6 +715,10 @@ CONFIG_NETDEV_10000=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -786,8 +810,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set CONFIG_NVRAM=y @@ -826,6 +852,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_GPIO is not set CONFIG_I2C_MPC=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SIMTEC is not set @@ -852,8 +879,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -CONFIG_SENSORS_EEPROM=y +# CONFIG_EEPROM_AT24 is not set +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -866,18 +893,42 @@ CONFIG_SENSORS_EEPROM=y # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -# CONFIG_GPIOLIB is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -886,18 +937,15 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_UCB1400_CORE is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -924,6 +972,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_XC2028=m CONFIG_MEDIA_TUNER_XC5000=m +# CONFIG_DVB_DYNAMIC_MINORS is not set CONFIG_DVB_CAPTURE_DRIVERS=y # @@ -969,6 +1018,12 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_FE_CUSTOMISE is not set # +# Multistandard (satellite) frontends +# +# CONFIG_DVB_STB0899 is not set +# CONFIG_DVB_STB6100 is not set + +# # DVB-S (satellite) frontends # # CONFIG_DVB_CX24110 is not set @@ -980,8 +1035,10 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_STV0299 is not set # CONFIG_DVB_TDA8083 is not set # CONFIG_DVB_TDA10086 is not set +# CONFIG_DVB_TDA8261 is not set # CONFIG_DVB_VES1X93 is not set # CONFIG_DVB_TUNER_ITD1000 is not set +# CONFIG_DVB_TUNER_CX24113 is not set # CONFIG_DVB_TDA826X is not set # CONFIG_DVB_TUA6100 is not set # CONFIG_DVB_CX24116 is not set @@ -1022,11 +1079,17 @@ CONFIG_DVB_CAPTURE_DRIVERS=y # CONFIG_DVB_OR51132 is not set # CONFIG_DVB_BCM3510 is not set # CONFIG_DVB_LGDT330X is not set +# CONFIG_DVB_LGDT3304 is not set # CONFIG_DVB_S5H1409 is not set # CONFIG_DVB_AU8522 is not set # CONFIG_DVB_S5H1411 is not set # +# ISDB-T (terrestrial) frontends +# +# CONFIG_DVB_S921 is not set + +# # Digital terrestrial only tuners/PLL # # CONFIG_DVB_PLL is not set @@ -1079,6 +1142,7 @@ CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_PCM_OSS_PLUGINS=y +# CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set CONFIG_SND_VERBOSE_PROCFS=y @@ -1181,11 +1245,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -1193,12 +1255,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set CONFIG_THRUSTMASTER_FF=m CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y @@ -1231,6 +1296,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1256,18 +1322,17 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1315,6 +1380,11 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1352,6 +1422,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1398,7 +1469,9 @@ CONFIG_FS_MBCACHE=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1440,10 +1513,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y CONFIG_ADFS_FS=m # CONFIG_ADFS_FS_RW is not set CONFIG_AFFS_FS=m @@ -1454,6 +1524,7 @@ CONFIG_BEFS_FS=m CONFIG_BFS_FS=m CONFIG_EFS_FS=m CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set CONFIG_VXFS_FS=m # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1555,6 +1626,7 @@ CONFIG_NLS_UTF8=m # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1606,6 +1678,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1615,6 +1688,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1623,11 +1698,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1654,11 +1731,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1692,7 +1773,7 @@ CONFIG_CRYPTO_HMAC=y # # Digest # -# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CRC32C=m # CONFIG_CRYPTO_MD4 is not set CONFIG_CRYPTO_MD5=y # CONFIG_CRYPTO_MICHAEL_MIC is not set diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig index a4283b6a43d..4b76321c0ec 100644 --- a/arch/powerpc/configs/mpc885_ads_defconfig +++ b/arch/powerpc/configs/mpc885_ads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:46 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:41 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_PPC_8xx=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_8xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -40,7 +41,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -70,12 +71,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -108,7 +109,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -118,13 +118,11 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -141,6 +139,10 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -193,6 +195,7 @@ CONFIG_NO_UCODE_PATCH=y # CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -212,12 +215,12 @@ CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set CONFIG_8XX_MINIMAL_FPEMU=y # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -232,12 +235,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -279,6 +284,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -330,6 +336,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -345,8 +352,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -439,6 +447,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -481,6 +495,9 @@ CONFIG_DAVICOM_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -506,6 +523,10 @@ CONFIG_FS_ENET_MDIO_FEC=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set @@ -547,7 +568,9 @@ CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y # CONFIG_NVRAM is not set @@ -566,11 +589,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -580,14 +603,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set - -# -# Voltage and Current regulators -# # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -641,6 +657,7 @@ CONFIG_DAB=y CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set # CONFIG_DNOTIFY is not set # CONFIG_INOTIFY is not set # CONFIG_QUOTA is not set @@ -673,10 +690,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -686,6 +700,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -741,6 +756,7 @@ CONFIG_MSDOS_PARTITION=y # # Library routines # +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -788,6 +804,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -796,6 +813,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -804,11 +823,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set diff --git a/arch/powerpc/configs/pasemi_defconfig b/arch/powerpc/configs/pasemi_defconfig index 199e5f59d7a..4f8681cc8d7 100644 --- a/arch/powerpc/configs/pasemi_defconfig +++ b/arch/powerpc/configs/pasemi_defconfig @@ -984,7 +984,7 @@ CONFIG_I2C_PASEMI=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_SENSORS_EEPROM=y +CONFIG_EEPROM_LEGACY=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCF8591 is not set diff --git a/arch/powerpc/configs/pmac32_defconfig b/arch/powerpc/configs/pmac32_defconfig index de9b121820a..5339bb44cce 100644 --- a/arch/powerpc/configs/pmac32_defconfig +++ b/arch/powerpc/configs/pmac32_defconfig @@ -1232,8 +1232,8 @@ CONFIG_I2C_POWERMAC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/ppc40x_defconfig b/arch/powerpc/configs/ppc40x_defconfig index 4256e2c4534..326205cabf7 100644 --- a/arch/powerpc/configs/ppc40x_defconfig +++ b/arch/powerpc/configs/ppc40x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Fri Nov 14 09:54:44 2008 +# Linux kernel version: 2.6.29-rc2 +# Fri Jan 23 08:44:03 2009 # # CONFIG_PPC64 is not set @@ -15,6 +15,7 @@ CONFIG_40x=y # CONFIG_44x is not set # CONFIG_E200 is not set CONFIG_4xx=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -41,7 +42,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -72,12 +73,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -90,6 +91,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -112,7 +114,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -123,7 +124,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -131,11 +131,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -152,6 +150,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -192,6 +194,7 @@ CONFIG_IBM405_ERR51=y # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set CONFIG_OF_RTC=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -215,6 +218,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set # CONFIG_MATH_EMULATION is not set # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -229,12 +233,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -258,6 +264,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -282,6 +289,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -355,6 +363,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -370,8 +379,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -397,6 +407,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y CONFIG_MTD_OF_PARTS=y @@ -469,6 +480,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # CONFIG_MTD_UBI=m @@ -593,6 +610,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -615,6 +633,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set @@ -674,9 +696,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -745,13 +770,12 @@ CONFIG_I2C_IBM_IIC=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -803,9 +827,11 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -904,9 +930,13 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -918,7 +948,6 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -939,7 +968,9 @@ CONFIG_FS_MBCACHE=m # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -976,10 +1007,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1005,6 +1033,7 @@ CONFIG_UBIFS_FS_LZO=y CONFIG_UBIFS_FS_ZLIB=y # CONFIG_UBIFS_FS_DEBUG is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1084,6 +1113,7 @@ CONFIG_NLS_ISO8859_1=m # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m # CONFIG_CRC_T10DIF is not set @@ -1137,6 +1167,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1146,6 +1177,8 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1154,11 +1187,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1185,11 +1220,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/ppc44x_defconfig b/arch/powerpc/configs/ppc44x_defconfig index 034a1fbdc88..5e6d55f006b 100644 --- a/arch/powerpc/configs/ppc44x_defconfig +++ b/arch/powerpc/configs/ppc44x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc4 -# Fri Nov 14 10:06:19 2008 +# Linux kernel version: 2.6.29-rc2 +# Fri Jan 23 08:43:46 2009 # # CONFIG_PPC64 is not set @@ -19,6 +19,7 @@ CONFIG_4xx=y CONFIG_BOOKE=y CONFIG_PTE_64BIT=y CONFIG_PHYS_64BIT=y +CONFIG_PPC_MMU_NOHASH=y # CONFIG_PPC_MM_SLICES is not set CONFIG_NOT_COHERENT_CACHE=y CONFIG_PPC32=y @@ -45,7 +46,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -76,12 +77,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -94,6 +95,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y CONFIG_KALLSYMS_EXTRA_PASS=y CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -116,7 +118,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y @@ -127,7 +128,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -135,11 +135,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -157,6 +155,10 @@ CONFIG_DEFAULT_AS=y CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_PREEMPT_NOTIFIERS=y CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set CONFIG_PPC4xx_PCI_EXPRESS=y @@ -204,6 +206,7 @@ CONFIG_XILINX_VIRTEX_5_FXT=y # CONFIG_CPU_FREQ is not set # CONFIG_FSL_ULI1575 is not set CONFIG_OF_RTC=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -227,6 +230,7 @@ CONFIG_BINFMT_ELF=y # CONFIG_BINFMT_MISC is not set CONFIG_MATH_EMULATION=y # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y @@ -241,12 +245,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -CONFIG_RESOURCES_64BIT=y CONFIG_PHYS_ADDR_T_64BIT=y CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -269,6 +275,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -293,6 +300,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -354,10 +362,12 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_IP_SCTP is not set # CONFIG_TIPC is not set # CONFIG_ATM is not set +CONFIG_STP=m CONFIG_BRIDGE=m # CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set +CONFIG_LLC=m # CONFIG_LLC2 is not set # CONFIG_IPX is not set # CONFIG_ATALK is not set @@ -366,6 +376,7 @@ CONFIG_BRIDGE=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -378,6 +389,7 @@ CONFIG_BRIDGE=m # CONFIG_AF_RXRPC is not set # CONFIG_PHONET is not set # CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -403,6 +415,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set CONFIG_MTD_OF_PARTS=y @@ -474,6 +487,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # CONFIG_MTD_UBI=m @@ -631,6 +650,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -655,6 +675,10 @@ CONFIG_NETDEV_10000=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -722,9 +746,12 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y +# CONFIG_SERIAL_OF_PLATFORM_NWPSERIAL is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -794,13 +821,12 @@ CONFIG_I2C_IBM_IIC=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_PCF8591 is not set -# CONFIG_TPS65010 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -853,9 +879,11 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set # @@ -972,6 +1000,7 @@ CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_BIG_ENDIAN_MMIO=y CONFIG_USB_EHCI_BIG_ENDIAN_DESC=y CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=m @@ -1012,7 +1041,6 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -1058,6 +1086,11 @@ CONFIG_USB_STORAGE=m # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1069,7 +1102,6 @@ CONFIG_USB_STORAGE=m # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -1089,7 +1121,9 @@ CONFIG_FS_MBCACHE=m # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1126,10 +1160,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1155,6 +1186,7 @@ CONFIG_UBIFS_FS_LZO=y CONFIG_UBIFS_FS_ZLIB=y # CONFIG_UBIFS_FS_DEBUG is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1234,6 +1266,7 @@ CONFIG_NLS_ISO8859_1=m # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=m CONFIG_CRC_T10DIF=m @@ -1287,6 +1320,7 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1296,6 +1330,8 @@ CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1304,11 +1340,13 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1333,11 +1371,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1419,5 +1461,6 @@ CONFIG_CRYPTO_LZO=m CONFIG_VIRTUALIZATION=y CONFIG_KVM=y CONFIG_KVM_440=y +# CONFIG_KVM_EXIT_TIMING is not set # CONFIG_VIRTIO_PCI is not set # CONFIG_VIRTIO_BALLOON is not set diff --git a/arch/powerpc/configs/ppc64_defconfig b/arch/powerpc/configs/ppc64_defconfig index d4685d1c0be..88c6295b76c 100644 --- a/arch/powerpc/configs/ppc64_defconfig +++ b/arch/powerpc/configs/ppc64_defconfig @@ -1261,8 +1261,8 @@ CONFIG_I2C_PASEMI=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/ppc6xx_defconfig b/arch/powerpc/configs/ppc6xx_defconfig index 01f05ec5abf..7d044dfd923 100644 --- a/arch/powerpc/configs/ppc6xx_defconfig +++ b/arch/powerpc/configs/ppc6xx_defconfig @@ -1801,8 +1801,8 @@ CONFIG_I2C_STUB=m # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -CONFIG_AT24=m -CONFIG_SENSORS_EEPROM=m +CONFIG_EEPROM_AT24=m +CONFIG_EEPROM_LEGACY=m CONFIG_SENSORS_PCF8574=m CONFIG_PCF8575=m CONFIG_SENSORS_PCA9539=m diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig index 228099d77c3..fdded96633a 100644 --- a/arch/powerpc/configs/pq2fads_defconfig +++ b/arch/powerpc/configs/pq2fads_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:47 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:42 2009 # # CONFIG_PPC64 is not set @@ -44,7 +44,7 @@ CONFIG_GENERIC_GPIO=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -87,6 +87,7 @@ CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -109,7 +110,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -120,13 +120,11 @@ CONFIG_HAVE_CLK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -142,6 +140,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -183,6 +185,7 @@ CONFIG_PQ2_ADS_PCI_PIC=y CONFIG_CPM2=y # CONFIG_FSL_ULI1575 is not set CONFIG_CPM=y +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -209,6 +212,7 @@ CONFIG_BINFMT_MISC=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_FLATMEM=y @@ -216,12 +220,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -247,6 +253,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -269,6 +276,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -350,6 +358,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -364,8 +373,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # @@ -460,6 +470,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -520,6 +536,7 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -577,9 +594,12 @@ CONFIG_DAVICOM_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=y -# CONFIG_MDIO_OF_GPIO is not set +# CONFIG_MDIO_GPIO is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_HAPPYMEAL is not set @@ -624,6 +644,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -646,6 +667,10 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # CONFIG_WAN is not set # CONFIG_FDDI is not set CONFIG_PPP=y @@ -743,6 +768,7 @@ CONFIG_SERIAL_CPM=y CONFIG_SERIAL_CPM_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -761,6 +787,11 @@ CONFIG_GPIOLIB=y # CONFIG_DEBUG_GPIO is not set # +# Memory mapped GPIO expanders: +# +# CONFIG_GPIO_XILINX is not set + +# # I2C GPIO expanders: # @@ -778,11 +809,11 @@ CONFIG_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -792,14 +823,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set - -# -# Voltage and Current regulators -# # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -844,7 +868,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y # CONFIG_USB_GADGET_MUSB_HDRC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG is not set @@ -859,10 +883,12 @@ CONFIG_USB_GADGET_SELECTED=y # CONFIG_USB_GADGET_PXA25X is not set # CONFIG_USB_GADGET_PXA27X is not set # CONFIG_USB_GADGET_S3C2410 is not set +# CONFIG_USB_GADGET_IMX is not set CONFIG_USB_GADGET_M66592=y CONFIG_USB_M66592=y # CONFIG_USB_GADGET_AMD5536UDC is not set # CONFIG_USB_GADGET_FSL_QE is not set +# CONFIG_USB_GADGET_CI13XXX is not set # CONFIG_USB_GADGET_NET2280 is not set # CONFIG_USB_GADGET_GOKU is not set # CONFIG_USB_GADGET_DUMMY_HCD is not set @@ -876,6 +902,11 @@ CONFIG_USB_ETH_RNDIS=y # CONFIG_USB_MIDI_GADGET is not set # CONFIG_USB_G_PRINTER is not set # CONFIG_USB_CDC_COMPOSITE is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -938,13 +969,11 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_HFSPLUS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1035,6 +1064,7 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set @@ -1086,6 +1116,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1095,6 +1126,8 @@ CONFIG_DEBUG_INFO=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1103,10 +1136,12 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_DEBUG_STACKOVERFLOW is not set # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_DEBUG_PAGEALLOC is not set @@ -1133,11 +1168,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig index 6046dc0cbd8..e971db17113 100644 --- a/arch/powerpc/configs/prpmc2800_defconfig +++ b/arch/powerpc/configs/prpmc2800_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:48 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:44 2009 # # CONFIG_PPC64 is not set @@ -45,7 +45,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -75,12 +75,12 @@ CONFIG_POSIX_MQUEUE=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y # CONFIG_FAIR_GROUP_SCHED is not set # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -118,7 +118,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -128,13 +127,11 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -151,6 +148,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -190,6 +191,7 @@ CONFIG_MV64X60=y # CONFIG_CPU_FREQ is not set # CONFIG_TAU is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -213,10 +215,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y # CONFIG_IOMMU_HELPER is not set +CONFIG_PPC_NEED_DMA_SYNC_OPS=y CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -228,12 +232,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y # CONFIG_CMDLINE_BOOL is not set @@ -255,6 +261,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -279,6 +286,8 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NET_NS is not set +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -335,6 +344,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -350,8 +360,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -445,6 +456,12 @@ CONFIG_MTD_PHYSMAP_OF=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -475,8 +492,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -489,7 +508,6 @@ CONFIG_IDE_GD_ATA=y # CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -519,6 +537,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -571,6 +590,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -587,6 +607,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -707,6 +729,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -730,7 +755,6 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set CONFIG_E100=y # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -744,6 +768,7 @@ CONFIG_8139TOO=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -773,6 +798,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -797,6 +823,10 @@ CONFIG_NETDEV_10000=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -877,8 +907,10 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set @@ -943,8 +975,8 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -970,8 +1002,10 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set @@ -992,6 +1026,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4245 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set @@ -1018,11 +1053,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -1031,18 +1066,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -1101,11 +1131,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -1113,12 +1141,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +CONFIG_HID_NTRIG=y CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +CONFIG_HID_TOPSEED=y CONFIG_THRUSTMASTER_FF=y CONFIG_ZEROPLUS_FF=y CONFIG_USB_SUPPORT=y @@ -1148,6 +1179,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_ROOT_HUB_TT is not set # CONFIG_USB_EHCI_TT_NEWSCHED is not set CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -1170,11 +1202,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set @@ -1216,6 +1248,10 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1253,6 +1289,7 @@ CONFIG_RTC_DRV_MAX6900=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1299,7 +1336,9 @@ CONFIG_FS_MBCACHE=y # CONFIG_FS_POSIX_ACL is not set CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1333,10 +1372,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1346,6 +1382,7 @@ CONFIG_TMPFS=y # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1400,6 +1437,7 @@ CONFIG_MSDOS_PARTITION=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1433,6 +1471,8 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1440,6 +1480,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set @@ -1458,6 +1499,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set diff --git a/arch/powerpc/configs/pseries_defconfig b/arch/powerpc/configs/pseries_defconfig index 1e520ab6511..61b10084971 100644 --- a/arch/powerpc/configs/pseries_defconfig +++ b/arch/powerpc/configs/pseries_defconfig @@ -1055,8 +1055,8 @@ CONFIG_I2C_ALGOBIT=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig index b3f5671972a..86512c8790d 100644 --- a/arch/powerpc/configs/storcenter_defconfig +++ b/arch/powerpc/configs/storcenter_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc3 -# Sat Nov 8 12:39:48 2008 +# Linux kernel version: 2.6.29-rc2 +# Mon Jan 26 15:35:46 2009 # # CONFIG_PPC64 is not set @@ -43,7 +43,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_PPC=y CONFIG_EARLY_PRINTK=y CONFIG_GENERIC_NVRAM=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y @@ -73,12 +73,12 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set CONFIG_GROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y # CONFIG_RT_GROUP_SCHED is not set CONFIG_USER_SCHED=y # CONFIG_CGROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -110,7 +110,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y CONFIG_HAVE_IOREMAP_PROT=y @@ -120,7 +119,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y # CONFIG_HAVE_GENERIC_DMA_COHERENT is not set CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -128,11 +126,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -149,6 +145,10 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -191,6 +191,7 @@ CONFIG_MPIC=y # CONFIG_TAU is not set # CONFIG_QUICC_ENGINE is not set # CONFIG_FSL_ULI1575 is not set +# CONFIG_SIMPLE_GPIO is not set # # Kernel options @@ -217,6 +218,7 @@ CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y CONFIG_ARCH_HAS_WALK_MEMORY=y CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y # CONFIG_KEXEC is not set +# CONFIG_CRASH_DUMP is not set CONFIG_ARCH_FLATMEM_ENABLE=y CONFIG_ARCH_POPULATES_NODE_MAP=y CONFIG_SELECT_MEMORY_MODEL=y @@ -228,12 +230,14 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=1 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_PPC_4K_PAGES=y +# CONFIG_PPC_16K_PAGES is not set +# CONFIG_PPC_64K_PAGES is not set CONFIG_FORCE_MAX_ZONEORDER=11 CONFIG_PROC_DEVICETREE=y CONFIG_CMDLINE_BOOL=y @@ -257,6 +261,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_ARCH_SUPPORTS_MSI=y # CONFIG_PCI_MSI is not set # CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_STUB is not set # CONFIG_PCCARD is not set # CONFIG_HOTPLUG_PCI is not set # CONFIG_HAS_RAPIDIO is not set @@ -279,6 +284,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=m # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -330,6 +336,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -345,8 +352,9 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -367,6 +375,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set # CONFIG_MTD_CMDLINE_PARTS is not set # CONFIG_MTD_OF_PARTS is not set @@ -416,9 +425,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0xFF800000 -CONFIG_MTD_PHYSMAP_LEN=0x00800000 -CONFIG_MTD_PHYSMAP_BANKWIDTH=1 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_PHYSMAP_OF is not set # CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set @@ -442,6 +449,12 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=1 # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set +# CONFIG_MTD_QINFO_PROBE is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -468,8 +481,10 @@ CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -483,7 +498,6 @@ CONFIG_IDE_GD_ATA=y # CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -512,6 +526,7 @@ CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -582,6 +597,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_EATA is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -672,6 +689,10 @@ CONFIG_R8169=y # CONFIG_IWLWIFI_LEDS is not set # +# Enable WiMAX (Networking options) to see the WiMAX drivers +# + +# # USB Network Adapters # # CONFIG_USB_CATC is not set @@ -729,8 +750,10 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set # CONFIG_SERIAL_OF_PLATFORM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_HVC_UDBG is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m CONFIG_NVRAM=y @@ -795,8 +818,8 @@ CONFIG_I2C_MPC=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -816,11 +839,11 @@ CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -829,18 +852,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set - -# -# Voltage and Current regulators -# +# CONFIG_MFD_PCF50633 is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # # Multimedia devices @@ -903,6 +921,7 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_EHCI_TT_NEWSCHED is not set # CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PPC_OF=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y @@ -925,18 +944,17 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set # CONFIG_USB_STORAGE_DATAFAB is not set # CONFIG_USB_STORAGE_FREECOM is not set # CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set # CONFIG_USB_STORAGE_USBAT is not set # CONFIG_USB_STORAGE_SDDR09 is not set # CONFIG_USB_STORAGE_SDDR55 is not set @@ -983,6 +1001,10 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# # CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set @@ -1020,6 +1042,7 @@ CONFIG_RTC_DRV_DS1307=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1070,7 +1093,9 @@ CONFIG_XFS_FS=m # CONFIG_XFS_POSIX_ACL is not set # CONFIG_XFS_RT is not set # CONFIG_XFS_DEBUG is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1104,10 +1129,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1127,6 +1149,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set # CONFIG_CRAMFS is not set +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1204,6 +1227,7 @@ CONFIG_NLS_UTF8=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y @@ -1239,6 +1263,8 @@ CONFIG_FRAME_WARN=1024 # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # Tracers @@ -1246,6 +1272,7 @@ CONFIG_HAVE_FUNCTION_TRACER=y # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y +CONFIG_PRINT_STACK_DEPTH=64 # CONFIG_IRQSTACKS is not set # CONFIG_BOOTX_TEXT is not set # CONFIG_PPC_EARLY_DEBUG is not set diff --git a/arch/powerpc/kernel/irq.c b/arch/powerpc/kernel/irq.c index 23b8b5e36f9..ad1e5ac721d 100644 --- a/arch/powerpc/kernel/irq.c +++ b/arch/powerpc/kernel/irq.c @@ -231,7 +231,7 @@ void fixup_irqs(cpumask_t map) if (irq_desc[irq].status & IRQ_PER_CPU) continue; - cpus_and(mask, irq_desc[irq].affinity, map); + cpumask_and(&mask, irq_desc[irq].affinity, &map); if (any_online_cpu(mask) == NR_CPUS) { printk("Breaking affinity for irq %i\n", irq); mask = map; diff --git a/arch/powerpc/kernel/vio.c b/arch/powerpc/kernel/vio.c index 94aa7b011b2..d3694498f3a 100644 --- a/arch/powerpc/kernel/vio.c +++ b/arch/powerpc/kernel/vio.c @@ -492,14 +492,14 @@ static void *vio_dma_iommu_alloc_coherent(struct device *dev, size_t size, struct vio_dev *viodev = to_vio_dev(dev); void *ret; - if (vio_cmo_alloc(viodev, roundup(size, IOMMU_PAGE_SIZE))) { + if (vio_cmo_alloc(viodev, roundup(size, PAGE_SIZE))) { atomic_inc(&viodev->cmo.allocs_failed); return NULL; } ret = dma_iommu_ops.alloc_coherent(dev, size, dma_handle, flag); if (unlikely(ret == NULL)) { - vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE)); + vio_cmo_dealloc(viodev, roundup(size, PAGE_SIZE)); atomic_inc(&viodev->cmo.allocs_failed); } @@ -513,7 +513,7 @@ static void vio_dma_iommu_free_coherent(struct device *dev, size_t size, dma_iommu_ops.free_coherent(dev, size, vaddr, dma_handle); - vio_cmo_dealloc(viodev, roundup(size, IOMMU_PAGE_SIZE)); + vio_cmo_dealloc(viodev, roundup(size, PAGE_SIZE)); } static dma_addr_t vio_dma_iommu_map_page(struct device *dev, struct page *page, @@ -572,6 +572,7 @@ static int vio_dma_iommu_map_sg(struct device *dev, struct scatterlist *sglist, if (unlikely(!ret)) { vio_cmo_dealloc(viodev, alloc_size); atomic_inc(&viodev->cmo.allocs_failed); + return ret; } for (sgl = sglist, count = 0; count < ret; count++, sgl++) diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S index 161b9b9691f..295ccc5e86b 100644 --- a/arch/powerpc/kernel/vmlinux.lds.S +++ b/arch/powerpc/kernel/vmlinux.lds.S @@ -184,6 +184,7 @@ SECTIONS . = ALIGN(PAGE_SIZE); .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { __per_cpu_start = .; + *(.data.percpu.page_aligned) *(.data.percpu) *(.data.percpu.shared_aligned) __per_cpu_end = .; diff --git a/arch/powerpc/mm/ppc_mmu_32.c b/arch/powerpc/mm/ppc_mmu_32.c index 45d925360b8..fe65c405412 100644 --- a/arch/powerpc/mm/ppc_mmu_32.c +++ b/arch/powerpc/mm/ppc_mmu_32.c @@ -123,9 +123,9 @@ void __init setbat(int index, unsigned long virt, phys_addr_t phys, int wimgxpp; struct ppc_bat *bat = BATS[index]; - if (((flags & _PAGE_NO_CACHE) == 0) && - cpu_has_feature(CPU_FTR_NEED_COHERENT)) - flags |= _PAGE_COHERENT; + if ((flags & _PAGE_NO_CACHE) || + (cpu_has_feature(CPU_FTR_NEED_COHERENT) == 0)) + flags &= ~_PAGE_COHERENT; bl = (size >> 17) - 1; if (PVR_VER(mfspr(SPRN_PVR)) != 1) { diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 698133180ae..01f51daace1 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -3,5 +3,4 @@ obj-$(CONFIG_PPC44x_SIMPLE) += ppc44x_simple.o obj-$(CONFIG_EBONY) += ebony.o obj-$(CONFIG_SAM440EP) += sam440ep.o obj-$(CONFIG_WARP) += warp.o -obj-$(CONFIG_WARP) += warp-nand.o obj-$(CONFIG_XILINX_VIRTEX_5_FXT) += virtex.o diff --git a/arch/powerpc/platforms/44x/warp-nand.c b/arch/powerpc/platforms/44x/warp-nand.c deleted file mode 100644 index 89ecd76127d..00000000000 --- a/arch/powerpc/platforms/44x/warp-nand.c +++ /dev/null @@ -1,135 +0,0 @@ -/* - * PIKA Warp(tm) NAND flash specific routines - * - * Copyright (c) 2008 PIKA Technologies - * Sean MacLennan <smaclennan@pikatech.com> - */ - -#include <linux/platform_device.h> -#include <linux/mtd/mtd.h> -#include <linux/mtd/map.h> -#include <linux/mtd/partitions.h> -#include <linux/mtd/nand.h> -#include <linux/mtd/ndfc.h> -#include <linux/of.h> -#include <asm/machdep.h> - - -#ifdef CONFIG_MTD_NAND_NDFC - -#define CS_NAND_0 1 /* use chip select 1 for NAND device 0 */ - -#define WARP_NAND_FLASH_REG_ADDR 0xD0000000UL -#define WARP_NAND_FLASH_REG_SIZE 0x2000 - -static struct resource warp_ndfc = { - .start = WARP_NAND_FLASH_REG_ADDR, - .end = WARP_NAND_FLASH_REG_ADDR + WARP_NAND_FLASH_REG_SIZE - 1, - .flags = IORESOURCE_MEM, -}; - -static struct mtd_partition nand_parts[] = { - { - .name = "kernel", - .offset = 0, - .size = 0x0200000 - }, - { - .name = "root", - .offset = 0x0200000, - .size = 0x3E00000 - }, - { - .name = "persistent", - .offset = 0x4000000, - .size = 0x4000000 - }, - { - .name = "persistent1", - .offset = 0x8000000, - .size = 0x4000000 - }, - { - .name = "persistent2", - .offset = 0xC000000, - .size = 0x4000000 - } -}; - -struct ndfc_controller_settings warp_ndfc_settings = { - .ccr_settings = (NDFC_CCR_BS(CS_NAND_0) | NDFC_CCR_ARAC1), - .ndfc_erpn = 0, -}; - -static struct ndfc_chip_settings warp_chip0_settings = { - .bank_settings = 0x80002222, -}; - -struct platform_nand_ctrl warp_nand_ctrl = { - .priv = &warp_ndfc_settings, -}; - -static struct platform_device warp_ndfc_device = { - .name = "ndfc-nand", - .id = 0, - .dev = { - .platform_data = &warp_nand_ctrl, - }, - .num_resources = 1, - .resource = &warp_ndfc, -}; - -/* Do NOT set the ecclayout: let it default so it is correct for both - * 64M and 256M flash chips. - */ -static struct platform_nand_chip warp_nand_chip0 = { - .nr_chips = 1, - .chip_offset = CS_NAND_0, - .nr_partitions = ARRAY_SIZE(nand_parts), - .partitions = nand_parts, - .chip_delay = 20, - .priv = &warp_chip0_settings, -}; - -static struct platform_device warp_nand_device = { - .name = "ndfc-chip", - .id = 0, - .num_resources = 0, - .dev = { - .platform_data = &warp_nand_chip0, - .parent = &warp_ndfc_device.dev, - } -}; - -static int warp_setup_nand_flash(void) -{ - struct device_node *np; - - /* Try to detect a rev A based on NOR size. */ - np = of_find_compatible_node(NULL, NULL, "cfi-flash"); - if (np) { - struct property *pp; - - pp = of_find_property(np, "reg", NULL); - if (pp && (pp->length == 12)) { - u32 *v = pp->value; - if (v[2] == 0x4000000) { - /* Rev A = 64M NAND */ - warp_nand_chip0.nr_partitions = 3; - - nand_parts[1].size = 0x3000000; - nand_parts[2].offset = 0x3200000; - nand_parts[2].size = 0x0e00000; - } - } - of_node_put(np); - } - - platform_device_register(&warp_ndfc_device); - platform_device_register(&warp_nand_device); - - return 0; -} -machine_device_initcall(warp, warp_setup_nand_flash); - -#endif diff --git a/arch/powerpc/platforms/83xx/mpc831x_rdb.c b/arch/powerpc/platforms/83xx/mpc831x_rdb.c index 5177bdd2c62..91a2c80b9d7 100644 --- a/arch/powerpc/platforms/83xx/mpc831x_rdb.c +++ b/arch/powerpc/platforms/83xx/mpc831x_rdb.c @@ -71,6 +71,7 @@ static int __init mpc831x_rdb_probe(void) static struct of_device_id __initdata of_bus_ids[] = { { .compatible = "simple-bus" }, + { .compatible = "gianfar" }, {}, }; diff --git a/arch/powerpc/platforms/pseries/phyp_dump.c b/arch/powerpc/platforms/pseries/phyp_dump.c index 6cf35cd8d0b..15eb6107bcd 100644 --- a/arch/powerpc/platforms/pseries/phyp_dump.c +++ b/arch/powerpc/platforms/pseries/phyp_dump.c @@ -144,8 +144,8 @@ static void print_dump_header(const struct phyp_dump_header *ph) ph->first_offset_section); printk(KERN_INFO "dump disk sections should be zero\n"); printk(KERN_INFO "dump disk section = %d\n", ph->dump_disk_section); - printk(KERN_INFO "block num = %ld\n", ph->block_num_dd); - printk(KERN_INFO "number of blocks = %ld\n", ph->num_of_blocks_dd); + printk(KERN_INFO "block num = %lld\n", ph->block_num_dd); + printk(KERN_INFO "number of blocks = %lld\n", ph->num_of_blocks_dd); printk(KERN_INFO "dump disk offset = %d\n", ph->offset_dd); printk(KERN_INFO "Max auto time= %d\n", ph->maxtime_to_auto); @@ -154,33 +154,33 @@ static void print_dump_header(const struct phyp_dump_header *ph) printk(KERN_INFO "cpu dump_flags =%d\n", ph->cpu_data.dump_flags); printk(KERN_INFO "cpu source_type =%d\n", ph->cpu_data.source_type); printk(KERN_INFO "cpu error_flags =%d\n", ph->cpu_data.error_flags); - printk(KERN_INFO "cpu source_address =%lx\n", + printk(KERN_INFO "cpu source_address =%llx\n", ph->cpu_data.source_address); - printk(KERN_INFO "cpu source_length =%lx\n", + printk(KERN_INFO "cpu source_length =%llx\n", ph->cpu_data.source_length); - printk(KERN_INFO "cpu length_copied =%lx\n", + printk(KERN_INFO "cpu length_copied =%llx\n", ph->cpu_data.length_copied); printk(KERN_INFO " HPTE AREA \n"); printk(KERN_INFO "HPTE dump_flags =%d\n", ph->hpte_data.dump_flags); printk(KERN_INFO "HPTE source_type =%d\n", ph->hpte_data.source_type); printk(KERN_INFO "HPTE error_flags =%d\n", ph->hpte_data.error_flags); - printk(KERN_INFO "HPTE source_address =%lx\n", + printk(KERN_INFO "HPTE source_address =%llx\n", ph->hpte_data.source_address); - printk(KERN_INFO "HPTE source_length =%lx\n", + printk(KERN_INFO "HPTE source_length =%llx\n", ph->hpte_data.source_length); - printk(KERN_INFO "HPTE length_copied =%lx\n", + printk(KERN_INFO "HPTE length_copied =%llx\n", ph->hpte_data.length_copied); printk(KERN_INFO " SRSD AREA \n"); printk(KERN_INFO "SRSD dump_flags =%d\n", ph->kernel_data.dump_flags); printk(KERN_INFO "SRSD source_type =%d\n", ph->kernel_data.source_type); printk(KERN_INFO "SRSD error_flags =%d\n", ph->kernel_data.error_flags); - printk(KERN_INFO "SRSD source_address =%lx\n", + printk(KERN_INFO "SRSD source_address =%llx\n", ph->kernel_data.source_address); - printk(KERN_INFO "SRSD source_length =%lx\n", + printk(KERN_INFO "SRSD source_length =%llx\n", ph->kernel_data.source_length); - printk(KERN_INFO "SRSD length_copied =%lx\n", + printk(KERN_INFO "SRSD length_copied =%llx\n", ph->kernel_data.length_copied); #endif } @@ -367,8 +367,8 @@ static ssize_t show_release_region(struct kobject *kobj, /* total reserved size - start of scratch area */ second_addr_range = phyp_dump_info->init_reserve_size - phyp_dump_info->reserved_scratch_size; - return sprintf(buf, "CPU:0x%lx-0x%lx: HPTE:0x%lx-0x%lx:" - " DUMP:0x%lx-0x%lx, 0x%lx-0x%lx:\n", + return sprintf(buf, "CPU:0x%llx-0x%llx: HPTE:0x%llx-0x%llx:" + " DUMP:0x%llx-0x%llx, 0x%lx-0x%llx:\n", phdr.cpu_data.destination_address, phdr.cpu_data.length_copied, phdr.hpte_data.destination_address, diff --git a/arch/powerpc/platforms/pseries/xics.c b/arch/powerpc/platforms/pseries/xics.c index 84e058f1e1c..80b513449f4 100644 --- a/arch/powerpc/platforms/pseries/xics.c +++ b/arch/powerpc/platforms/pseries/xics.c @@ -153,9 +153,10 @@ static int get_irq_server(unsigned int virq, unsigned int strict_check) { int server; /* For the moment only implement delivery to all cpus or one cpu */ - cpumask_t cpumask = irq_desc[virq].affinity; + cpumask_t cpumask; cpumask_t tmp = CPU_MASK_NONE; + cpumask_copy(&cpumask, irq_desc[virq].affinity); if (!distribute_irqs) return default_server; @@ -869,7 +870,7 @@ void xics_migrate_irqs_away(void) virq, cpu); /* Reset affinity to all cpus */ - irq_desc[virq].affinity = CPU_MASK_ALL; + cpumask_setall(irq_desc[virq].affinity); desc->chip->set_affinity(virq, cpu_all_mask); unlock: spin_unlock_irqrestore(&desc->lock, flags); diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c index a35297dbac2..532e205303a 100644 --- a/arch/powerpc/sysdev/mpic.c +++ b/arch/powerpc/sysdev/mpic.c @@ -566,9 +566,10 @@ static void __init mpic_scan_ht_pics(struct mpic *mpic) #ifdef CONFIG_SMP static int irq_choose_cpu(unsigned int virt_irq) { - cpumask_t mask = irq_desc[virt_irq].affinity; + cpumask_t mask; int cpuid; + cpumask_copy(&mask, irq_desc[virt_irq].affinity); if (cpus_equal(mask, CPU_MASK_ALL)) { static int irq_rover; static DEFINE_SPINLOCK(irq_rover_lock); diff --git a/arch/s390/include/asm/elf.h b/arch/s390/include/asm/elf.h index d480f39d65e..74d0bbb7d95 100644 --- a/arch/s390/include/asm/elf.h +++ b/arch/s390/include/asm/elf.h @@ -172,14 +172,14 @@ extern char elf_platform[]; #ifndef __s390x__ #define SET_PERSONALITY(ex) set_personality(PER_LINUX) #else /* __s390x__ */ -#define SET_PERSONALITY(ex) \ -do { \ - if (current->personality != PER_LINUX32) \ - set_personality(PER_LINUX); \ - if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ - set_thread_flag(TIF_31BIT); \ - else \ - clear_thread_flag(TIF_31BIT); \ +#define SET_PERSONALITY(ex) \ +do { \ + if (personality(current->personality) != PER_LINUX32) \ + set_personality(PER_LINUX); \ + if ((ex).e_ident[EI_CLASS] == ELFCLASS32) \ + set_thread_flag(TIF_31BIT); \ + else \ + clear_thread_flag(TIF_31BIT); \ } while (0) #endif /* __s390x__ */ diff --git a/arch/s390/kernel/compat_wrapper.S b/arch/s390/kernel/compat_wrapper.S index 6035cd20c7a..62c706eb0de 100644 --- a/arch/s390/kernel/compat_wrapper.S +++ b/arch/s390/kernel/compat_wrapper.S @@ -1767,3 +1767,41 @@ sys_dup3_wrapper: sys_epoll_create1_wrapper: lgfr %r2,%r2 # int jg sys_epoll_create1 # branch to system call + + .globl sys32_readahead_wrapper +sys32_readahead_wrapper: + lgfr %r2,%r2 # int + llgfr %r3,%r3 # u32 + llgfr %r4,%r4 # u32 + lgfr %r5,%r5 # s32 + jg sys32_readahead # branch to system call + + .globl sys32_sendfile64_wrapper +sys32_sendfile64_wrapper: + lgfr %r2,%r2 # int + lgfr %r3,%r3 # int + llgtr %r4,%r4 # compat_loff_t * + lgfr %r5,%r5 # s32 + jg sys32_sendfile64 # branch to system call + + .globl sys_tkill_wrapper +sys_tkill_wrapper: + lgfr %r2,%r2 # pid_t + lgfr %r3,%r3 # int + jg sys_tkill # branch to system call + + .globl sys_tgkill_wrapper +sys_tgkill_wrapper: + lgfr %r2,%r2 # pid_t + lgfr %r3,%r3 # pid_t + lgfr %r4,%r4 # int + jg sys_tgkill # branch to system call + + .globl compat_sys_keyctl_wrapper +compat_sys_keyctl_wrapper: + llgfr %r2,%r2 # u32 + llgfr %r3,%r3 # u32 + llgfr %r4,%r4 # u32 + llgfr %r5,%r5 # u32 + llgfr %r6,%r6 # u32 + jg compat_sys_keyctl # branch to system call diff --git a/arch/s390/kernel/syscalls.S b/arch/s390/kernel/syscalls.S index 76d16e0140b..fe5b25a988a 100644 --- a/arch/s390/kernel/syscalls.S +++ b/arch/s390/kernel/syscalls.S @@ -194,7 +194,7 @@ SYSCALL(sys_chown16,sys_ni_syscall,sys32_chown16_wrapper) /* old chown16 syscall SYSCALL(sys_getcwd,sys_getcwd,sys32_getcwd_wrapper) SYSCALL(sys_capget,sys_capget,sys32_capget_wrapper) SYSCALL(sys_capset,sys_capset,sys32_capset_wrapper) /* 185 */ -SYSCALL(sys_sigaltstack,sys_sigaltstack,sys32_sigaltstack) +SYSCALL(sys_sigaltstack,sys_sigaltstack,sys32_sigaltstack_wrapper) SYSCALL(sys_sendfile,sys_sendfile64,sys32_sendfile_wrapper) NI_SYSCALL /* streams1 */ NI_SYSCALL /* streams2 */ @@ -230,8 +230,8 @@ SYSCALL(sys_mincore,sys_mincore,sys32_mincore_wrapper) SYSCALL(sys_madvise,sys_madvise,sys32_madvise_wrapper) SYSCALL(sys_getdents64,sys_getdents64,sys32_getdents64_wrapper) /* 220 */ SYSCALL(sys_fcntl64,sys_ni_syscall,compat_sys_fcntl64_wrapper) -SYSCALL(sys_readahead,sys_readahead,sys32_readahead) -SYSCALL(sys_sendfile64,sys_ni_syscall,sys32_sendfile64) +SYSCALL(sys_readahead,sys_readahead,sys32_readahead_wrapper) +SYSCALL(sys_sendfile64,sys_ni_syscall,sys32_sendfile64_wrapper) SYSCALL(sys_setxattr,sys_setxattr,sys32_setxattr_wrapper) SYSCALL(sys_lsetxattr,sys_lsetxattr,sys32_lsetxattr_wrapper) /* 225 */ SYSCALL(sys_fsetxattr,sys_fsetxattr,sys32_fsetxattr_wrapper) @@ -245,11 +245,11 @@ SYSCALL(sys_removexattr,sys_removexattr,sys32_removexattr_wrapper) SYSCALL(sys_lremovexattr,sys_lremovexattr,sys32_lremovexattr_wrapper) SYSCALL(sys_fremovexattr,sys_fremovexattr,sys32_fremovexattr_wrapper) /* 235 */ SYSCALL(sys_gettid,sys_gettid,sys_gettid) -SYSCALL(sys_tkill,sys_tkill,sys_tkill) +SYSCALL(sys_tkill,sys_tkill,sys_tkill_wrapper) SYSCALL(sys_futex,sys_futex,compat_sys_futex_wrapper) SYSCALL(sys_sched_setaffinity,sys_sched_setaffinity,sys32_sched_setaffinity_wrapper) SYSCALL(sys_sched_getaffinity,sys_sched_getaffinity,sys32_sched_getaffinity_wrapper) /* 240 */ -SYSCALL(sys_tgkill,sys_tgkill,sys_tgkill) +SYSCALL(sys_tgkill,sys_tgkill,sys_tgkill_wrapper) NI_SYSCALL /* reserved for TUX */ SYSCALL(sys_io_setup,sys_io_setup,sys32_io_setup_wrapper) SYSCALL(sys_io_destroy,sys_io_destroy,sys32_io_destroy_wrapper) @@ -288,7 +288,7 @@ SYSCALL(sys_mq_getsetattr,sys_mq_getsetattr,compat_sys_mq_getsetattr_wrapper) SYSCALL(sys_kexec_load,sys_kexec_load,compat_sys_kexec_load_wrapper) SYSCALL(sys_add_key,sys_add_key,compat_sys_add_key_wrapper) SYSCALL(sys_request_key,sys_request_key,compat_sys_request_key_wrapper) -SYSCALL(sys_keyctl,sys_keyctl,compat_sys_keyctl) /* 280 */ +SYSCALL(sys_keyctl,sys_keyctl,compat_sys_keyctl_wrapper) /* 280 */ SYSCALL(sys_waitid,sys_waitid,compat_sys_waitid_wrapper) SYSCALL(sys_ioprio_set,sys_ioprio_set,sys_ioprio_set_wrapper) SYSCALL(sys_ioprio_get,sys_ioprio_get,sys_ioprio_get_wrapper) diff --git a/arch/s390/kernel/time.c b/arch/s390/kernel/time.c index d649600df5b..fc468cae446 100644 --- a/arch/s390/kernel/time.c +++ b/arch/s390/kernel/time.c @@ -399,8 +399,10 @@ static struct workqueue_struct *time_sync_wq; static void __init time_init_wq(void) { - if (!time_sync_wq) - time_sync_wq = create_singlethread_workqueue("timesync"); + if (time_sync_wq) + return; + time_sync_wq = create_singlethread_workqueue("timesync"); + stop_machine_create(); } /* diff --git a/arch/s390/kernel/vtime.c b/arch/s390/kernel/vtime.c index 2fb36e46219..ecf0304e61c 100644 --- a/arch/s390/kernel/vtime.c +++ b/arch/s390/kernel/vtime.c @@ -516,8 +516,12 @@ EXPORT_SYMBOL(del_virt_timer); */ void init_cpu_vtimer(void) { + struct thread_info *ti = current_thread_info(); struct vtimer_queue *vq; + S390_lowcore.user_timer = ti->user_timer; + S390_lowcore.system_timer = ti->system_timer; + /* kick the virtual timer */ asm volatile ("STCK %0" : "=m" (S390_lowcore.last_update_clock)); asm volatile ("STPT %0" : "=m" (S390_lowcore.last_update_timer)); diff --git a/arch/sh/Kconfig b/arch/sh/Kconfig index f32a5197128..ebabe518e72 100644 --- a/arch/sh/Kconfig +++ b/arch/sh/Kconfig @@ -644,66 +644,25 @@ endmenu menu "Bus options" -# Even on SuperH devices which don't have an ISA bus, -# this variable helps the PCMCIA modules handle -# IRQ requesting properly -- Greg Banks. -# -# Though we're generally not interested in it when -# we're not using PCMCIA, so we make it dependent on -# PCMCIA outright. -- PFM. -config ISA - def_bool y - depends on PCMCIA && HD6446X_SERIES - help - Find out whether you have ISA slots on your motherboard. ISA is the - name of a bus system, i.e. the way the CPU talks to the other stuff - inside your box. Other bus systems are PCI, EISA, MicroChannel - (MCA) or VESA. ISA is an older system, now being displaced by PCI; - newer boards don't support it. If you have ISA, say Y, otherwise N. - -config EISA - bool - ---help--- - The Extended Industry Standard Architecture (EISA) bus was - developed as an open alternative to the IBM MicroChannel bus. - - The EISA bus provided some of the features of the IBM MicroChannel - bus while maintaining backward compatibility with cards made for - the older ISA bus. The EISA bus saw limited use between 1988 and - 1995 when it was made obsolete by the PCI bus. - - Say Y here if you are building a kernel for an EISA-based machine. - - Otherwise, say N. - -config MCA - bool - help - MicroChannel Architecture is found in some IBM PS/2 machines and - laptops. It is a bus system similar to PCI or ISA. See - <file:Documentation/mca.txt> (and especially the web page given - there) before attempting to build an MCA bus kernel. - -config SBUS - bool - config SUPERHYWAY tristate "SuperHyway Bus support" depends on CPU_SUBTYPE_SH4_202 config MAPLE - bool "Maple Bus support" - depends on SH_DREAMCAST - help - The Maple Bus is SEGA's serial communication bus for peripherals - on the Dreamcast. Without this bus support you won't be able to - get your Dreamcast keyboard etc to work, so most users - probably want to say 'Y' here, unless you are only using the - Dreamcast with a serial line terminal or a remote network - connection. + bool "Maple Bus support" + depends on SH_DREAMCAST + help + The Maple Bus is SEGA's serial communication bus for peripherals + on the Dreamcast. Without this bus support you won't be able to + get your Dreamcast keyboard etc to work, so most users + probably want to say 'Y' here, unless you are only using the + Dreamcast with a serial line terminal or a remote network + connection. source "arch/sh/drivers/pci/Kconfig" +source "drivers/pci/pcie/Kconfig" + source "drivers/pci/Kconfig" source "drivers/pcmcia/Kconfig" diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 1c67cba6e34..caf4c33f4e8 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -18,8 +18,10 @@ #include <linux/mtd/sh_flctl.h> #include <linux/delay.h> #include <linux/i2c.h> -#include <linux/smc911x.h> +#include <linux/smsc911x.h> #include <linux/gpio.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> #include <media/soc_camera_platform.h> #include <media/sh_mobile_ceu.h> #include <video/sh_mobile_lcdc.h> @@ -27,12 +29,14 @@ #include <asm/clock.h> #include <cpu/sh7723.h> -static struct smc911x_platdata smc911x_info = { - .flags = SMC911X_USE_32BIT, - .irq_flags = IRQF_TRIGGER_LOW, +static struct smsc911x_platform_config smsc911x_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT, }; -static struct resource smc9118_resources[] = { +static struct resource smsc9118_resources[] = { [0] = { .start = 0xb6080000, .end = 0xb60fffff, @@ -45,13 +49,13 @@ static struct resource smc9118_resources[] = { } }; -static struct platform_device smc9118_device = { - .name = "smc911x", +static struct platform_device smsc9118_device = { + .name = "smsc911x", .id = -1, - .num_resources = ARRAY_SIZE(smc9118_resources), - .resource = smc9118_resources, + .num_resources = ARRAY_SIZE(smsc9118_resources), + .resource = smsc9118_resources, .dev = { - .platform_data = &smc911x_info, + .platform_data = &smsc911x_config, }, }; @@ -315,8 +319,22 @@ static struct platform_device ceu_device = { }, }; +struct spi_gpio_platform_data sdcard_cn3_platform_data = { + .sck = GPIO_PTD0, + .mosi = GPIO_PTD1, + .miso = GPIO_PTD2, + .num_chipselect = 1, +}; + +static struct platform_device sdcard_cn3_device = { + .name = "spi_gpio", + .dev = { + .platform_data = &sdcard_cn3_platform_data, + }, +}; + static struct platform_device *ap325rxa_devices[] __initdata = { - &smc9118_device, + &smsc9118_device, &ap325rxa_nor_flash_device, &lcdc_device, &ceu_device, @@ -324,6 +342,7 @@ static struct platform_device *ap325rxa_devices[] __initdata = { &camera_device, #endif &nand_flash_device, + &sdcard_cn3_device, }; static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { @@ -332,6 +351,15 @@ static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { }, }; +static struct spi_board_info ap325rxa_spi_devices[] = { + { + .modalias = "mmc_spi", + .max_speed_hz = 5000000, + .chip_select = 0, + .controller_data = (void *) GPIO_PTD5, + }, +}; + static int __init ap325rxa_devices_setup(void) { /* LD3 and LD4 LEDs */ @@ -429,6 +457,9 @@ static int __init ap325rxa_devices_setup(void) i2c_register_board_info(0, ap325rxa_i2c_devices, ARRAY_SIZE(ap325rxa_i2c_devices)); + spi_register_board_info(ap325rxa_spi_devices, + ARRAY_SIZE(ap325rxa_spi_devices)); + return platform_add_devices(ap325rxa_devices, ARRAY_SIZE(ap325rxa_devices)); } diff --git a/arch/sh/boards/board-magicpanelr2.c b/arch/sh/boards/board-magicpanelr2.c index 3de22ccdeb7..0a37c8bfc95 100644 --- a/arch/sh/boards/board-magicpanelr2.c +++ b/arch/sh/boards/board-magicpanelr2.c @@ -14,6 +14,7 @@ #include <linux/platform_device.h> #include <linux/delay.h> #include <linux/gpio.h> +#include <linux/smsc911x.h> #include <linux/mtd/mtd.h> #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> @@ -242,7 +243,7 @@ static void __init mpr2_setup(char **cmdline_p) printk(KERN_WARNING "Ethernet not ready\n"); } -static struct resource smc911x_resources[] = { +static struct resource smsc911x_resources[] = { [0] = { .start = 0xa8000000, .end = 0xabffffff, @@ -255,11 +256,21 @@ static struct resource smc911x_resources[] = { }, }; -static struct platform_device smc911x_device = { - .name = "smc911x", +static struct smsc911x_platform_config smsc911x_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_32BIT, +}; + +static struct platform_device smsc911x_device = { + .name = "smsc911x", .id = -1, - .num_resources = ARRAY_SIZE(smc911x_resources), - .resource = smc911x_resources, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, + .dev = { + .platform_data = &smsc911x_config, + }, }; static struct resource heartbeat_resources[] = { @@ -360,7 +371,7 @@ static void __init set_mtd_partitions(void) static struct platform_device *mpr2_devices[] __initdata = { &heartbeat_device, - &smc911x_device, + &smsc911x_device, &flash_device, }; diff --git a/arch/sh/boards/board-sh7785lcr.c b/arch/sh/boards/board-sh7785lcr.c index 408bbddaf32..38a64968d7b 100644 --- a/arch/sh/boards/board-sh7785lcr.c +++ b/arch/sh/boards/board-sh7785lcr.c @@ -18,6 +18,7 @@ #include <linux/i2c.h> #include <linux/i2c-pca-platform.h> #include <linux/i2c-algo-pca.h> +#include <linux/irq.h> #include <asm/heartbeat.h> #include <mach/sh7785lcr.h> diff --git a/arch/sh/boards/mach-highlander/setup.c b/arch/sh/boards/mach-highlander/setup.c index 806438b42ca..20fe72c515d 100644 --- a/arch/sh/boards/mach-highlander/setup.c +++ b/arch/sh/boards/mach-highlander/setup.c @@ -18,6 +18,7 @@ #include <linux/ata_platform.h> #include <linux/types.h> #include <linux/i2c.h> +#include <linux/irq.h> #include <net/ax88796.h> #include <asm/machvec.h> #include <mach/highlander.h> diff --git a/arch/sh/boards/mach-hp6xx/setup.c b/arch/sh/boards/mach-hp6xx/setup.c index 48fece78ff5..746742bdc01 100644 --- a/arch/sh/boards/mach-hp6xx/setup.c +++ b/arch/sh/boards/mach-hp6xx/setup.c @@ -12,9 +12,9 @@ #include <linux/types.h> #include <linux/init.h> #include <linux/platform_device.h> +#include <linux/irq.h> #include <asm/hd64461.h> #include <asm/io.h> -#include <asm/irq.h> #include <mach/hp6xx.h> #include <cpu/dac.h> diff --git a/arch/sh/boards/mach-migor/setup.c b/arch/sh/boards/mach-migor/setup.c index cc1408119c2..28e56c5809a 100644 --- a/arch/sh/boards/mach-migor/setup.c +++ b/arch/sh/boards/mach-migor/setup.c @@ -18,9 +18,12 @@ #include <linux/delay.h> #include <linux/clk.h> #include <linux/gpio.h> -#include <media/soc_camera_platform.h> -#include <media/sh_mobile_ceu.h> +#include <linux/spi/spi.h> +#include <linux/spi/spi_gpio.h> #include <video/sh_mobile_lcdc.h> +#include <media/sh_mobile_ceu.h> +#include <media/ov772x.h> +#include <media/tw9910.h> #include <asm/clock.h> #include <asm/machvec.h> #include <asm/io.h> @@ -292,9 +295,12 @@ static struct platform_device migor_lcdc_device = { }; static struct clk *camera_clk; +static DEFINE_MUTEX(camera_lock); -static void camera_power_on(void) +static void camera_power_on(int is_tw) { + mutex_lock(&camera_lock); + /* Use 10 MHz VIO_CKO instead of 24 MHz to work * around signal quality issues on Panel Board V2.1. */ @@ -304,6 +310,12 @@ static void camera_power_on(void) /* use VIO_RST to take camera out of reset */ mdelay(10); + if (is_tw) { + gpio_set_value(GPIO_PTT2, 0); + gpio_set_value(GPIO_PTT0, 0); + } else { + gpio_set_value(GPIO_PTT0, 1); + } gpio_set_value(GPIO_PTT3, 0); mdelay(10); gpio_set_value(GPIO_PTT3, 1); @@ -316,107 +328,29 @@ static void camera_power_off(void) clk_put(camera_clk); gpio_set_value(GPIO_PTT3, 0); + mutex_unlock(&camera_lock); } -static void camera_power(int mode) +static int ov7725_power(struct device *dev, int mode) { if (mode) - camera_power_on(); + camera_power_on(0); else camera_power_off(); -} -#ifdef CONFIG_I2C -static unsigned char camera_ov772x_magic[] = -{ - 0x09, 0x01, 0x0c, 0x20, 0x0d, 0x41, 0x0e, 0x01, - 0x12, 0x00, 0x13, 0x8F, 0x14, 0x4A, 0x15, 0x00, - 0x16, 0x00, 0x17, 0x23, 0x18, 0xa0, 0x19, 0x07, - 0x1a, 0xf0, 0x1b, 0x40, 0x1f, 0x00, 0x20, 0x10, - 0x22, 0xff, 0x23, 0x01, 0x28, 0x00, 0x29, 0xa0, - 0x2a, 0x00, 0x2b, 0x00, 0x2c, 0xf0, 0x2d, 0x00, - 0x2e, 0x00, 0x30, 0x80, 0x31, 0x60, 0x32, 0x00, - 0x33, 0x00, 0x34, 0x00, 0x3d, 0x80, 0x3e, 0xe2, - 0x3f, 0x1f, 0x42, 0x80, 0x43, 0x80, 0x44, 0x80, - 0x45, 0x80, 0x46, 0x00, 0x47, 0x00, 0x48, 0x00, - 0x49, 0x50, 0x4a, 0x30, 0x4b, 0x50, 0x4c, 0x50, - 0x4d, 0x00, 0x4e, 0xef, 0x4f, 0x10, 0x50, 0x60, - 0x51, 0x00, 0x52, 0x00, 0x53, 0x24, 0x54, 0x7a, - 0x55, 0xfc, 0x62, 0xff, 0x63, 0xf0, 0x64, 0x1f, - 0x65, 0x00, 0x66, 0x10, 0x67, 0x00, 0x68, 0x00, - 0x69, 0x5c, 0x6a, 0x11, 0x6b, 0xa2, 0x6c, 0x01, - 0x6d, 0x50, 0x6e, 0x80, 0x6f, 0x80, 0x70, 0x0f, - 0x71, 0x00, 0x72, 0x00, 0x73, 0x0f, 0x74, 0x0f, - 0x75, 0xff, 0x78, 0x10, 0x79, 0x70, 0x7a, 0x70, - 0x7b, 0xf0, 0x7c, 0xf0, 0x7d, 0xf0, 0x7e, 0x0e, - 0x7f, 0x1a, 0x80, 0x31, 0x81, 0x5a, 0x82, 0x69, - 0x83, 0x75, 0x84, 0x7e, 0x85, 0x88, 0x86, 0x8f, - 0x87, 0x96, 0x88, 0xa3, 0x89, 0xaf, 0x8a, 0xc4, - 0x8b, 0xd7, 0x8c, 0xe8, 0x8d, 0x20, 0x8e, 0x00, - 0x8f, 0x00, 0x90, 0x08, 0x91, 0x10, 0x92, 0x1f, - 0x93, 0x01, 0x94, 0x2c, 0x95, 0x24, 0x96, 0x08, - 0x97, 0x14, 0x98, 0x24, 0x99, 0x38, 0x9a, 0x9e, - 0x9b, 0x00, 0x9c, 0x40, 0x9e, 0x11, 0x9f, 0x02, - 0xa0, 0x00, 0xa1, 0x40, 0xa2, 0x40, 0xa3, 0x06, - 0xa4, 0x00, 0xa6, 0x00, 0xa7, 0x40, 0xa8, 0x40, - 0xa9, 0x80, 0xaa, 0x80, 0xab, 0x06, 0xac, 0xff, - 0x12, 0x06, 0x64, 0x3f, 0x12, 0x46, 0x17, 0x3f, - 0x18, 0x50, 0x19, 0x03, 0x1a, 0x78, 0x29, 0x50, - 0x2c, 0x78, -}; + return 0; +} -static int ov772x_set_capture(struct soc_camera_platform_info *info, - int enable) +static int tw9910_power(struct device *dev, int mode) { - struct i2c_adapter *a = i2c_get_adapter(0); - struct i2c_msg msg; - int ret = 0; - int i; - - if (!enable) - return 0; /* camera_power_off() is enough */ - - for (i = 0; i < ARRAY_SIZE(camera_ov772x_magic); i += 2) { - u_int8_t buf[8]; - - msg.addr = 0x21; - msg.buf = buf; - msg.len = 2; - msg.flags = 0; - - buf[0] = camera_ov772x_magic[i]; - buf[1] = camera_ov772x_magic[i + 1]; - - ret = (ret < 0) ? ret : i2c_transfer(a, &msg, 1); - } + if (mode) + camera_power_on(1); + else + camera_power_off(); - return ret; + return 0; } -static struct soc_camera_platform_info ov772x_info = { - .iface = 0, - .format_name = "RGB565", - .format_depth = 16, - .format = { - .pixelformat = V4L2_PIX_FMT_RGB565, - .colorspace = V4L2_COLORSPACE_SRGB, - .width = 320, - .height = 240, - }, - .bus_param = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | - SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, - .power = camera_power, - .set_capture = ov772x_set_capture, -}; - -static struct platform_device migor_camera_device = { - .name = "soc_camera_platform", - .dev = { - .platform_data = &ov772x_info, - }, -}; -#endif /* CONFIG_I2C */ - static struct sh_mobile_ceu_info sh_mobile_ceu_info = { .flags = SOCAM_MASTER | SOCAM_DATAWIDTH_8 | SOCAM_PCLK_SAMPLE_RISING \ | SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH, @@ -448,16 +382,43 @@ static struct platform_device migor_ceu_device = { }, }; +static struct ov772x_camera_info ov7725_info = { + .buswidth = SOCAM_DATAWIDTH_8, + .link = { + .power = ov7725_power, + }, +}; + +static struct tw9910_video_info tw9910_info = { + .buswidth = SOCAM_DATAWIDTH_8, + .mpout = TW9910_MPO_FIELD, + .link = { + .power = tw9910_power, + } +}; + +struct spi_gpio_platform_data sdcard_cn9_platform_data = { + .sck = GPIO_PTD0, + .mosi = GPIO_PTD1, + .miso = GPIO_PTD2, + .num_chipselect = 1, +}; + +static struct platform_device sdcard_cn9_device = { + .name = "spi_gpio", + .dev = { + .platform_data = &sdcard_cn9_platform_data, + }, +}; + static struct platform_device *migor_devices[] __initdata = { &smc91x_eth_device, &sh_keysc_device, &migor_lcdc_device, &migor_ceu_device, -#ifdef CONFIG_I2C - &migor_camera_device, -#endif &migor_nor_flash_device, &migor_nand_flash_device, + &sdcard_cn9_device, }; static struct i2c_board_info migor_i2c_devices[] = { @@ -468,6 +429,23 @@ static struct i2c_board_info migor_i2c_devices[] = { I2C_BOARD_INFO("migor_ts", 0x51), .irq = 38, /* IRQ6 */ }, + { + I2C_BOARD_INFO("ov772x", 0x21), + .platform_data = &ov7725_info, + }, + { + I2C_BOARD_INFO("tw9910", 0x45), + .platform_data = &tw9910_info, + }, +}; + +static struct spi_board_info migor_spi_devices[] = { + { + .modalias = "mmc_spi", + .max_speed_hz = 5000000, + .chip_select = 0, + .controller_data = (void *) GPIO_PTD5, + }, }; static int __init migor_devices_setup(void) @@ -592,6 +570,9 @@ static int __init migor_devices_setup(void) i2c_register_board_info(0, migor_i2c_devices, ARRAY_SIZE(migor_i2c_devices)); + spi_register_board_info(migor_spi_devices, + ARRAY_SIZE(migor_spi_devices)); + return platform_add_devices(migor_devices, ARRAY_SIZE(migor_devices)); } __initcall(migor_devices_setup); diff --git a/arch/sh/boards/mach-rsk/devices-rsk7203.c b/arch/sh/boards/mach-rsk/devices-rsk7203.c index 73f743b9be8..d8a65ea9166 100644 --- a/arch/sh/boards/mach-rsk/devices-rsk7203.c +++ b/arch/sh/boards/mach-rsk/devices-rsk7203.c @@ -15,19 +15,21 @@ #include <linux/mtd/partitions.h> #include <linux/mtd/physmap.h> #include <linux/mtd/map.h> -#include <linux/smc911x.h> +#include <linux/smsc911x.h> #include <linux/gpio.h> #include <linux/leds.h> #include <asm/machvec.h> #include <asm/io.h> #include <cpu/sh7203.h> -static struct smc911x_platdata smc911x_info = { - .flags = SMC911X_USE_16BIT, - .irq_flags = IRQF_TRIGGER_LOW, +static struct smsc911x_platform_config smsc911x_config = { + .phy_interface = PHY_INTERFACE_MODE_MII, + .irq_polarity = SMSC911X_IRQ_POLARITY_ACTIVE_LOW, + .irq_type = SMSC911X_IRQ_TYPE_OPEN_DRAIN, + .flags = SMSC911X_USE_16BIT, }; -static struct resource smc911x_resources[] = { +static struct resource smsc911x_resources[] = { [0] = { .start = 0x24000000, .end = 0x24000000 + 0x100, @@ -40,13 +42,13 @@ static struct resource smc911x_resources[] = { }, }; -static struct platform_device smc911x_device = { - .name = "smc911x", +static struct platform_device smsc911x_device = { + .name = "smsc911x", .id = -1, - .num_resources = ARRAY_SIZE(smc911x_resources), - .resource = smc911x_resources, + .num_resources = ARRAY_SIZE(smsc911x_resources), + .resource = smsc911x_resources, .dev = { - .platform_data = &smc911x_info, + .platform_data = &smsc911x_config, }, }; @@ -87,7 +89,7 @@ static struct platform_device led_device = { }; static struct platform_device *rsk7203_devices[] __initdata = { - &smc911x_device, + &smsc911x_device, &led_device, }; diff --git a/arch/sh/boards/mach-x3proto/setup.c b/arch/sh/boards/mach-x3proto/setup.c index a70d23b2178..a340492087f 100644 --- a/arch/sh/boards/mach-x3proto/setup.c +++ b/arch/sh/boards/mach-x3proto/setup.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/io.h> #include <linux/smc91x.h> +#include <linux/irq.h> #include <asm/ilsel.h> static struct resource heartbeat_resources[] = { diff --git a/arch/sh/configs/ap325rxa_defconfig b/arch/sh/configs/ap325rxa_defconfig index 874dd9726e5..5c423fa8e6b 100644 --- a/arch/sh/configs/ap325rxa_defconfig +++ b/arch/sh/configs/ap325rxa_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Tue Oct 21 18:20:06 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 16:54:19 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -75,12 +77,10 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y @@ -90,7 +90,6 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -98,11 +97,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -119,6 +116,10 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -128,6 +129,7 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -192,7 +194,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -269,7 +270,6 @@ CONFIG_SECCOMP=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # @@ -293,11 +293,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -353,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -368,8 +376,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -447,6 +455,8 @@ CONFIG_MTD_PHYSMAP_BANKWIDTH=0 # # Self-contained MTD device drivers # +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_M25P80 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -472,7 +482,15 @@ CONFIG_MTD_NAND_SH_FLCTL=y # # UBI - Unsorted block images # -# CONFIG_MTD_UBI is not set +CONFIG_MTD_UBI=y +CONFIG_MTD_UBI_WL_THRESHOLD=4096 +CONFIG_MTD_UBI_BEB_RESERVE=1 +# CONFIG_MTD_UBI_GLUEBI is not set + +# +# UBI debugging options +# +# CONFIG_MTD_UBI_DEBUG is not set # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set @@ -487,7 +505,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -530,6 +550,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set # CONFIG_ATA is not set @@ -541,13 +562,34 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_SMC91X is not set -CONFIG_SMC911X=y +# CONFIG_ENC28J60 is not set +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -630,6 +672,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -637,19 +680,102 @@ CONFIG_HW_RANDOM=y # CONFIG_R3964 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_SH_MOBILE=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +# CONFIG_AT24 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +CONFIG_SPI=y +CONFIG_SPI_MASTER=y + +# +# SPI Master Controller Drivers +# +CONFIG_SPI_BITBANG=y +CONFIG_SPI_GPIO=y +# CONFIG_SPI_SH_SCI is not set + +# +# SPI Protocol Masters +# +# CONFIG_SPI_AT25 is not set +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_TLE62X0 is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MCP23S08 is not set # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -658,8 +784,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -668,13 +799,47 @@ CONFIG_SSB_POSSIBLE=y # # Multimedia core support # -# CONFIG_VIDEO_DEV is not set +CONFIG_VIDEO_DEV=y +CONFIG_VIDEO_V4L2_COMMON=y +# CONFIG_VIDEO_ALLOW_V4L1 is not set +CONFIG_VIDEO_V4L1_COMPAT=y # CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set +CONFIG_VIDEO_MEDIA=y # # Multimedia drivers # +# CONFIG_MEDIA_ATTACH is not set +CONFIG_MEDIA_TUNER=y +# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set +CONFIG_MEDIA_TUNER_SIMPLE=y +CONFIG_MEDIA_TUNER_TDA8290=y +CONFIG_MEDIA_TUNER_TDA9887=y +CONFIG_MEDIA_TUNER_TEA5761=y +CONFIG_MEDIA_TUNER_TEA5767=y +CONFIG_MEDIA_TUNER_MT20XX=y +CONFIG_MEDIA_TUNER_XC2028=y +CONFIG_MEDIA_TUNER_XC5000=y +CONFIG_VIDEO_V4L2=y +CONFIG_VIDEOBUF_GEN=y +CONFIG_VIDEOBUF_DMA_CONTIG=y +CONFIG_VIDEO_CAPTURE_DRIVERS=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_HELPER_CHIPS_AUTO=y +# CONFIG_VIDEO_VIVI is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +CONFIG_SOC_CAMERA=y +# CONFIG_SOC_CAMERA_MT9M001 is not set +# CONFIG_SOC_CAMERA_MT9M111 is not set +# CONFIG_SOC_CAMERA_MT9T031 is not set +# CONFIG_SOC_CAMERA_MT9V022 is not set +# CONFIG_SOC_CAMERA_TW9910 is not set +CONFIG_SOC_CAMERA_PLATFORM=y +# CONFIG_SOC_CAMERA_OV772X is not set +CONFIG_VIDEO_SH_MOBILE_CEU=y +# CONFIG_RADIO_ADAPTERS is not set # CONFIG_DAB is not set # @@ -682,7 +847,34 @@ CONFIG_SSB_POSSIBLE=y # # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set +CONFIG_FB=y +# CONFIG_FIRMWARE_EDID is not set +# CONFIG_FB_DDC is not set +# CONFIG_FB_BOOT_VESA_SUPPORT is not set +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set +# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y +# CONFIG_FB_FOREIGN_ENDIAN is not set +CONFIG_FB_SYS_FOPS=y +CONFIG_FB_DEFERRED_IO=y +# CONFIG_FB_SVGALIB is not set +# CONFIG_FB_MACMODES is not set +# CONFIG_FB_BACKLIGHT is not set +# CONFIG_FB_MODE_HELPERS is not set +# CONFIG_FB_TILEBLITTING is not set + +# +# Frame buffer hardware drivers +# +# CONFIG_FB_S1D13XXX is not set +CONFIG_FB_SH_MOBILE_LCDC=y +# CONFIG_FB_VIRTUAL is not set +# CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -694,14 +886,103 @@ CONFIG_SSB_POSSIBLE=y # Console display driver support # CONFIG_DUMMY_CONSOLE=y +CONFIG_FRAMEBUFFER_CONSOLE=y +# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set +# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set +# CONFIG_FONTS is not set +CONFIG_FONT_8x8=y +CONFIG_FONT_8x16=y +CONFIG_LOGO=y +CONFIG_LOGO_LINUX_MONO=y +CONFIG_LOGO_LINUX_VGA16=y +CONFIG_LOGO_LINUX_CLUT224=y +CONFIG_LOGO_SUPERH_MONO=y +CONFIG_LOGO_SUPERH_VGA16=y +CONFIG_LOGO_SUPERH_CLUT224=y # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set +CONFIG_MMC=y +# CONFIG_MMC_DEBUG is not set +# CONFIG_MMC_UNSAFE_RESUME is not set + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +# CONFIG_SDIO_UART is not set +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +# CONFIG_MMC_SDHCI is not set +CONFIG_MMC_SPI=y # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set # CONFIG_ACCESSIBILITY is not set -# CONFIG_RTC_CLASS is not set +CONFIG_RTC_LIB=y +CONFIG_RTC_CLASS=y +CONFIG_RTC_HCTOSYS=y +CONFIG_RTC_HCTOSYS_DEVICE="rtc0" +# CONFIG_RTC_DEBUG is not set + +# +# RTC interfaces +# +CONFIG_RTC_INTF_SYSFS=y +CONFIG_RTC_INTF_PROC=y +CONFIG_RTC_INTF_DEV=y +# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set +# CONFIG_RTC_DRV_TEST is not set + +# +# I2C RTC drivers +# +# CONFIG_RTC_DRV_DS1307 is not set +# CONFIG_RTC_DRV_DS1374 is not set +# CONFIG_RTC_DRV_DS1672 is not set +# CONFIG_RTC_DRV_MAX6900 is not set +# CONFIG_RTC_DRV_RS5C372 is not set +# CONFIG_RTC_DRV_ISL1208 is not set +# CONFIG_RTC_DRV_X1205 is not set +CONFIG_RTC_DRV_PCF8563=y +# CONFIG_RTC_DRV_PCF8583 is not set +# CONFIG_RTC_DRV_M41T80 is not set +# CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set + +# +# SPI RTC drivers +# +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_DS3234 is not set + +# +# Platform RTC drivers +# +# CONFIG_RTC_DRV_DS1286 is not set +# CONFIG_RTC_DRV_DS1511 is not set +# CONFIG_RTC_DRV_DS1553 is not set +# CONFIG_RTC_DRV_DS1742 is not set +# CONFIG_RTC_DRV_STK17TA8 is not set +# CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set +# CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set +# CONFIG_RTC_DRV_V3020 is not set + +# +# on-CPU RTC drivers +# +# CONFIG_RTC_DRV_SH is not set # CONFIG_DMADEVICES is not set CONFIG_UIO=y # CONFIG_UIO_PDRV is not set @@ -768,10 +1049,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -780,6 +1058,7 @@ CONFIG_TMPFS=y # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_JFFS2_FS is not set +# CONFIG_UBIFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set @@ -878,13 +1157,19 @@ CONFIG_FRAME_WARN=1024 # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -900,11 +1185,14 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -987,12 +1275,13 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y -# CONFIG_CRC_ITU_T is not set +CONFIG_CRC_ITU_T=y CONFIG_CRC32=y -# CONFIG_CRC7 is not set +CONFIG_CRC7=y # CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y diff --git a/arch/sh/configs/cayman_defconfig b/arch/sh/configs/cayman_defconfig index e21c0e8e22d..92895013813 100644 --- a/arch/sh/configs/cayman_defconfig +++ b/arch/sh/configs/cayman_defconfig @@ -700,8 +700,8 @@ CONFIG_I2C_HELPER_AUTO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/sh/configs/dreamcast_defconfig b/arch/sh/configs/dreamcast_defconfig index be4c2e0dbb2..2d86e048751 100644 --- a/arch/sh/configs/dreamcast_defconfig +++ b/arch/sh/configs/dreamcast_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 18:18:02 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 16:54:55 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -78,7 +80,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y -# CONFIG_MARKERS is not set # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -90,7 +91,6 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -98,11 +98,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -119,6 +117,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -126,6 +128,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -195,7 +198,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -290,7 +292,6 @@ CONFIG_SECCOMP=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set @@ -310,6 +311,7 @@ CONFIG_MAPLE=y CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set @@ -322,11 +324,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -379,6 +388,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -394,8 +404,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -434,6 +444,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -477,6 +488,7 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -492,7 +504,6 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -506,6 +517,7 @@ CONFIG_8139TOO=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -611,6 +623,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -643,11 +656,11 @@ CONFIG_SH_WDT=y # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -657,7 +670,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -732,6 +745,7 @@ CONFIG_FB_PVR2=y # CONFIG_FB_SH_MOBILE_LCDC is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -788,9 +802,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -847,10 +862,7 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -901,13 +913,19 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -923,6 +941,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1006,6 +1025,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/edosk7705_defconfig b/arch/sh/configs/edosk7705_defconfig index 8f4329fbbd3..461bfb35022 100644 --- a/arch/sh/configs/edosk7705_defconfig +++ b/arch/sh/configs/edosk7705_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc6 -# Wed Dec 17 13:53:02 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 16:55:29 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -64,7 +64,6 @@ CONFIG_SHMEM=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y @@ -72,11 +71,14 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set # CONFIG_BLOCK is not set CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -151,7 +153,6 @@ CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -362,7 +363,6 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -382,10 +382,7 @@ CONFIG_STAGING_EXCLUDE_BUILD=y # CONFIG_TMPFS is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_NLS is not set # @@ -426,6 +423,7 @@ CONFIG_HAVE_ARCH_KGDB=y # # Library routines # +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/edosk7760_defconfig b/arch/sh/configs/edosk7760_defconfig index 158006847ad..14d4b35685a 100644 --- a/arch/sh/configs/edosk7760_defconfig +++ b/arch/sh/configs/edosk7760_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 18:20:09 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 16:55:48 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -59,6 +61,7 @@ CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -75,13 +78,11 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -92,7 +93,6 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -100,11 +100,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -121,6 +119,10 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -128,6 +130,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -191,7 +194,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -272,7 +274,6 @@ CONFIG_SCHED_HRTICK=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set @@ -298,11 +299,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -353,6 +361,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -368,8 +377,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -510,6 +519,7 @@ CONFIG_MII=y # CONFIG_STNIC is not set CONFIG_SMC91X=y # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -592,6 +602,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -632,8 +643,8 @@ CONFIG_I2C_SH7760=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -651,11 +662,11 @@ CONFIG_I2C_DEBUG_CHIP=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -664,9 +675,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -693,15 +707,16 @@ CONFIG_FB=m # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set # CONFIG_FB_BOOT_VESA_SUPPORT is not set -CONFIG_FB_CFB_FILLRECT=m -CONFIG_FB_CFB_COPYAREA=m -CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m # CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -716,6 +731,7 @@ CONFIG_FB_SH_MOBILE_LCDC=m # CONFIG_FB_SH7760 is not set # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -737,6 +753,7 @@ CONFIG_SND_PCM=y # CONFIG_SND_SEQUENCER is not set # CONFIG_SND_MIXER_OSS is not set # CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_HRTIMER is not set # CONFIG_SND_DYNAMIC_MINORS is not set # CONFIG_SND_SUPPORT_OLD_API is not set # CONFIG_SND_VERBOSE_PROCFS is not set @@ -753,6 +770,7 @@ CONFIG_SND_SOC=y # # SoC Audio support for SuperH # +CONFIG_SND_SOC_I2C_AND_SPI=y # CONFIG_SND_SOC_ALL_CODECS is not set # CONFIG_SOUND_PRIME is not set # CONFIG_HID_SUPPORT is not set @@ -823,10 +841,7 @@ CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -950,6 +965,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_FRAME_POINTER is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -958,17 +974,25 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000 @@ -978,7 +1002,9 @@ CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set # CONFIG_IRQSTACKS is not set -# CONFIG_SH_KGDB is not set +CONFIG_DUMP_CODE=y +# CONFIG_SH_NO_BSS_INIT is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -994,7 +1020,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1077,6 +1107,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/hp6xx_defconfig b/arch/sh/configs/hp6xx_defconfig index 1032b235f08..847a2510663 100644 --- a/arch/sh/configs/hp6xx_defconfig +++ b/arch/sh/configs/hp6xx_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 18:23:53 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 16:56:55 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,7 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_SYS_SUPPORTS_PM=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_APM_EMULATION=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -70,12 +71,10 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y @@ -85,13 +84,11 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -108,6 +105,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set CONFIG_FREEZER=y # @@ -115,6 +116,7 @@ CONFIG_FREEZER=y # CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -178,7 +180,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -236,7 +237,6 @@ CONFIG_NR_ONCHIP_DMA_CHANNELS=4 # CONFIG_HD6446X_SERIES=y CONFIG_HD64461=y -# CONFIG_HD64465 is not set CONFIG_HD64461_IRQ=36 CONFIG_HD64461_IOBASE=0xb0000000 CONFIG_HD64461_ENABLER=y @@ -275,7 +275,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # # Bus options # -CONFIG_ISA=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCCARD=y # CONFIG_PCMCIA_DEBUG is not set @@ -286,9 +285,6 @@ CONFIG_PCMCIA_IOCTL=y # # PC-card bridges # -# CONFIG_I82365 is not set -# CONFIG_TCIC is not set -CONFIG_PCMCIA_PROBE=y # # Executable file formats @@ -301,13 +297,13 @@ CONFIG_BINFMT_ELF=y # # Power management options (EXPERIMENTAL) # -CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_PM_SLEEP=y CONFIG_SUSPEND=y CONFIG_SUSPEND_FREEZER=y CONFIG_APM_EMULATION=y +# CONFIG_CPU_IDLE is not set # CONFIG_NET is not set # @@ -326,7 +322,6 @@ CONFIG_EXTRA_FIRMWARE="" # CONFIG_SYS_HYPERVISOR is not set # CONFIG_MTD is not set # CONFIG_PARPORT is not set -# CONFIG_PNP is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set @@ -336,6 +331,7 @@ CONFIG_BLK_DEV=y CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -375,18 +371,7 @@ CONFIG_BLK_DEV_SD=y # CONFIG_SCSI_SAS_LIBSAS is not set # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y -# CONFIG_SCSI_AHA152X is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_IN2000 is not set -# CONFIG_SCSI_DTC3280 is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_GENERIC_NCR5380 is not set -# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set -# CONFIG_SCSI_NCR53C406A is not set -# CONFIG_SCSI_PAS16 is not set -# CONFIG_SCSI_QLOGIC_FAS is not set -# CONFIG_SCSI_SYM53C416 is not set -# CONFIG_SCSI_T128 is not set +# CONFIG_LIBFC is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_LOWLEVEL_PCMCIA is not set # CONFIG_SCSI_DH is not set @@ -395,10 +380,7 @@ CONFIG_ATA=y CONFIG_SATA_PMP=y CONFIG_ATA_SFF=y # CONFIG_SATA_MV is not set -# CONFIG_PATA_LEGACY is not set # CONFIG_PATA_PCMCIA is not set -# CONFIG_PATA_QDI is not set -# CONFIG_PATA_WINBOND_VLB is not set CONFIG_PATA_PLATFORM=y # CONFIG_MD is not set # CONFIG_PHONE is not set @@ -438,11 +420,11 @@ CONFIG_INPUT_TOUCHSCREEN=y # CONFIG_TOUCHSCREEN_FUJITSU is not set # CONFIG_TOUCHSCREEN_GUNZE is not set # CONFIG_TOUCHSCREEN_ELO is not set +# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set # CONFIG_TOUCHSCREEN_MTOUCH is not set # CONFIG_TOUCHSCREEN_INEXIO is not set # CONFIG_TOUCHSCREEN_MK712 is not set CONFIG_TOUCHSCREEN_HP600=y -# CONFIG_TOUCHSCREEN_HTCPEN is not set # CONFIG_TOUCHSCREEN_PENMOUNT is not set # CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set # CONFIG_TOUCHSCREEN_TOUCHWIN is not set @@ -484,11 +466,11 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=64 # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y -# CONFIG_DTLK is not set # CONFIG_R3964 is not set # @@ -499,7 +481,6 @@ CONFIG_HW_RANDOM=y # CONFIG_CARDMAN_4040 is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set -CONFIG_DEVPORT=y # CONFIG_I2C is not set # CONFIG_SPI is not set # CONFIG_W1 is not set @@ -508,11 +489,11 @@ CONFIG_DEVPORT=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -522,7 +503,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -552,11 +533,12 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set +CONFIG_FB_SYS_FILLRECT=y +CONFIG_FB_SYS_COPYAREA=y +CONFIG_FB_SYS_IMAGEBLIT=y # CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_SYS_FOPS=y +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -571,6 +553,7 @@ CONFIG_FB_HIT=y CONFIG_FB_SH_MOBILE_LCDC=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set CONFIG_BACKLIGHT_LCD_SUPPORT=y CONFIG_LCD_CLASS_DEVICE=y # CONFIG_LCD_ILI9320 is not set @@ -587,7 +570,6 @@ CONFIG_BACKLIGHT_HP680=y # # Console display driver support # -# CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE=y # CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set @@ -701,10 +683,7 @@ CONFIG_SYSFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -785,13 +764,19 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -807,11 +792,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -893,6 +882,7 @@ CONFIG_CRYPTO_MD5=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set CONFIG_CRC16=y CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/landisk_defconfig b/arch/sh/configs/landisk_defconfig index b82dfb4da3a..d3bbbb03771 100644 --- a/arch/sh/configs/landisk_defconfig +++ b/arch/sh/configs/landisk_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 18:25:51 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 16:58:46 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -76,7 +78,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -87,7 +88,6 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -95,11 +95,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -116,6 +114,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -123,6 +125,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -186,7 +189,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -285,6 +287,7 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y CONFIG_PCCARD=y @@ -315,11 +318,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -401,6 +411,7 @@ CONFIG_ATALK=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -416,8 +427,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -462,6 +473,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -478,7 +490,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -CONFIG_BLK_DEV_IDESCSI=y # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -508,6 +519,7 @@ CONFIG_BLK_DEV_AEC62XX=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -560,6 +572,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -573,6 +586,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -634,6 +649,7 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -649,7 +665,6 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -659,6 +674,7 @@ CONFIG_8139CP=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -687,6 +703,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -695,6 +712,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set @@ -791,6 +809,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -832,11 +851,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -846,7 +865,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -952,11 +971,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=m CONFIG_HID_APPLE=m CONFIG_HID_BELKIN=m -CONFIG_HID_BRIGHT=m CONFIG_HID_CHERRY=m CONFIG_HID_CHICONY=m CONFIG_HID_CYPRESS=m -CONFIG_HID_DELL=m CONFIG_HID_EZKEY=m CONFIG_HID_GYRATION=m CONFIG_HID_LOGITECH=m @@ -964,12 +981,15 @@ CONFIG_HID_LOGITECH=m # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=m CONFIG_HID_MONTEREY=m +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=m # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=m CONFIG_HID_SAMSUNG=m CONFIG_HID_SONY=m CONFIG_HID_SUNPLUS=m +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set CONFIG_THRUSTMASTER_FF=m CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y @@ -990,6 +1010,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1007,6 +1029,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1017,11 +1041,11 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=m # CONFIG_USB_STORAGE_DEBUG is not set @@ -1119,6 +1143,7 @@ CONFIG_USB_SISUSBVGA_CON=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1192,10 +1217,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1302,14 +1324,20 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_PRINTK is not set -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1325,6 +1353,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1408,6 +1437,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/lboxre2_defconfig b/arch/sh/configs/lboxre2_defconfig index c3ecedfc1bc..d5c5a1dbaa6 100644 --- a/arch/sh/configs/lboxre2_defconfig +++ b/arch/sh/configs/lboxre2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 18:29:42 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:02:46 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -76,7 +78,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -87,7 +88,6 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -95,11 +95,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -116,6 +114,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -123,6 +125,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -186,7 +189,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -286,6 +288,7 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y CONFIG_PCCARD=y @@ -315,11 +318,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -399,6 +409,7 @@ CONFIG_NETFILTER_ADVANCED=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -414,8 +425,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -459,6 +470,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -501,6 +513,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -514,6 +527,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -627,6 +642,7 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -642,7 +658,6 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -656,6 +671,7 @@ CONFIG_8139TOO_TUNE_TWISTER=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -684,6 +700,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -692,6 +709,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set @@ -787,6 +805,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -828,11 +847,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -842,7 +861,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -902,9 +921,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1007,10 +1027,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1100,14 +1117,20 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_PRINTK is not set -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1123,6 +1146,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1206,6 +1230,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/magicpanelr2_defconfig b/arch/sh/configs/magicpanelr2_defconfig index 499ed720438..125d8019dc2 100644 --- a/arch/sh/configs/magicpanelr2_defconfig +++ b/arch/sh/configs/magicpanelr2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 18:32:23 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:03:37 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -58,6 +60,7 @@ CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -74,12 +77,10 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -90,7 +91,6 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -98,11 +98,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set CONFIG_MODVERSIONS=y CONFIG_MODULE_SRCVERSION_ALL=y -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -119,6 +117,10 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -126,6 +128,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -189,7 +192,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -296,11 +298,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -351,6 +360,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -366,8 +376,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -483,6 +493,7 @@ CONFIG_BLK_DEV_RAM_SIZE=65536 CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -502,13 +513,33 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_SMC91X is not set -CONFIG_SMC911X=y +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -618,6 +649,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -627,17 +659,37 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -647,7 +699,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -778,10 +830,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -912,6 +961,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -920,16 +970,24 @@ CONFIG_FRAME_POINTER=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y CONFIG_EARLY_SCIF_CONSOLE_PORT=0xa4430000 @@ -939,25 +997,9 @@ CONFIG_EARLY_PRINTK=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set # CONFIG_IRQSTACKS is not set -CONFIG_SH_KGDB=y - -# -# KGDB configuration options -# +CONFIG_DUMP_CODE=y +# CONFIG_SH_NO_BSS_INIT is not set # CONFIG_MORE_COMPILE_OPTIONS is not set -# CONFIG_KGDB_NMI is not set -CONFIG_KGDB_SYSRQ=y - -# -# Serial port setup -# -CONFIG_KGDB_DEFPORT=0 -CONFIG_KGDB_DEFBAUD=115200 -CONFIG_KGDB_DEFPARITY_N=y -# CONFIG_KGDB_DEFPARITY_E is not set -# CONFIG_KGDB_DEFPARITY_O is not set -CONFIG_KGDB_DEFBITS_8=y -# CONFIG_KGDB_DEFBITS_7 is not set # # Security options @@ -972,6 +1014,7 @@ CONFIG_KGDB_DEFBITS_8=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/microdev_defconfig b/arch/sh/configs/microdev_defconfig index b8ada8ce98d..5a1c0485a35 100644 --- a/arch/sh/configs/microdev_defconfig +++ b/arch/sh/configs/microdev_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 18:37:41 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:06:47 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -72,12 +74,10 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y @@ -87,13 +87,11 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -110,6 +108,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -117,6 +119,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -186,7 +189,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -265,7 +267,6 @@ CONFIG_HZ=250 # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set @@ -292,11 +293,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_PACKET is not set # CONFIG_UNIX is not set CONFIG_XFRM=y @@ -351,6 +359,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -366,8 +375,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -400,12 +409,14 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -445,6 +456,7 @@ CONFIG_MII=y # CONFIG_STNIC is not set CONFIG_SMC91X=y # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -503,6 +515,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -530,11 +543,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -544,7 +557,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -588,7 +601,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set @@ -656,10 +669,7 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -761,13 +771,19 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -783,11 +799,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -869,6 +889,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/migor_defconfig b/arch/sh/configs/migor_defconfig index 30cac42f25e..7758263514b 100644 --- a/arch/sh/configs/migor_defconfig +++ b/arch/sh/configs/migor_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Fri Oct 31 15:58:06 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:09:35 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -77,6 +79,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -89,18 +92,15 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -117,6 +117,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -127,6 +131,7 @@ CONFIG_CPU_SH4A=y CONFIG_CPU_SH4AL_DSP=y CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -196,7 +201,6 @@ CONFIG_SPARSEMEM_STATIC=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_MIGRATION is not set -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -299,11 +303,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -359,6 +370,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -375,8 +387,8 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -493,7 +505,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -536,6 +550,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set # CONFIG_ATA is not set @@ -554,6 +569,7 @@ CONFIG_MII=y # CONFIG_STNIC is not set CONFIG_SMC91X=y # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -644,6 +660,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -684,8 +701,8 @@ CONFIG_I2C_SH_MOBILE=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -697,17 +714,39 @@ CONFIG_I2C_SH_MOBILE=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -716,10 +755,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -762,8 +804,11 @@ CONFIG_VIDEO_HELPER_CHIPS_AUTO=y CONFIG_SOC_CAMERA=y # CONFIG_SOC_CAMERA_MT9M001 is not set # CONFIG_SOC_CAMERA_MT9M111 is not set +# CONFIG_SOC_CAMERA_MT9T031 is not set # CONFIG_SOC_CAMERA_MT9V022 is not set +# CONFIG_SOC_CAMERA_TW9910 is not set CONFIG_SOC_CAMERA_PLATFORM=y +# CONFIG_SOC_CAMERA_OV772X is not set CONFIG_VIDEO_SH_MOBILE_CEU=y # CONFIG_RADIO_ADAPTERS is not set # CONFIG_DAB is not set @@ -806,7 +851,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # CONFIG_USB_GADGET_MUSB_HDRC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # CONFIG_USB_GADGET=y # CONFIG_USB_GADGET_DEBUG_FILES is not set @@ -872,6 +917,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -948,10 +994,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1008,19 +1051,29 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000 CONFIG_EARLY_PRINTK=y -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1035,12 +1088,13 @@ CONFIG_CRYPTO=y # Crypto core or helper # # CONFIG_CRYPTO_FIPS is not set -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y +CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1123,6 +1177,7 @@ CONFIG_CRYPTO_MANAGER=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/r7780mp_defconfig b/arch/sh/configs/r7780mp_defconfig index 2e65149e950..65b01a9e593 100644 --- a/arch/sh/configs/r7780mp_defconfig +++ b/arch/sh/configs/r7780mp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 20:03:46 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:10:19 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -85,6 +87,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y @@ -96,7 +99,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -104,11 +106,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -125,6 +125,10 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -133,6 +137,7 @@ CONFIG_CLASSIC_RCU=y CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -203,7 +208,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -284,7 +288,6 @@ CONFIG_KEXEC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # @@ -302,6 +305,7 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set @@ -315,11 +319,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -382,6 +393,7 @@ CONFIG_LLC=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -398,8 +410,8 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -442,8 +454,10 @@ CONFIG_MISC_DEVICES=y CONFIG_EEPROM_93CX6=y # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -486,6 +500,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -499,6 +514,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -611,6 +628,7 @@ CONFIG_AX88796_93CX6=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -626,7 +644,6 @@ CONFIG_PCNET32=m # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -640,6 +657,7 @@ CONFIG_8139TOO_8129=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set CONFIG_VIA_RHINE=m @@ -669,6 +687,7 @@ CONFIG_R8169=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -677,6 +696,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set @@ -771,6 +791,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -836,8 +857,8 @@ CONFIG_I2C_HIGHLANDER=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -861,6 +882,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set @@ -909,11 +931,11 @@ CONFIG_HWMON=y CONFIG_THERMAL=y # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -922,9 +944,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -982,9 +1007,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1020,6 +1046,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1106,10 +1133,7 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1228,6 +1252,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y @@ -1236,6 +1261,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_FRAME_POINTER is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1244,16 +1270,28 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set CONFIG_EARLY_PRINTK=y @@ -1262,7 +1300,9 @@ CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set # CONFIG_IRQSTACKS is not set -# CONFIG_SH_KGDB is not set +CONFIG_DUMP_CODE=y +# CONFIG_SH_NO_BSS_INIT is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1278,11 +1318,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1366,6 +1410,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/r7785rp_defconfig b/arch/sh/configs/r7785rp_defconfig index 043a8a509e0..8defaa5f13b 100644 --- a/arch/sh/configs/r7785rp_defconfig +++ b/arch/sh/configs/r7785rp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 16:25:30 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:14:41 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -13,9 +13,11 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_GENERIC_IRQ_PROBE=y -# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y @@ -63,6 +65,7 @@ CONFIG_UID16=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -84,6 +87,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -97,7 +101,6 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -105,11 +108,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -126,6 +127,11 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" # CONFIG_CLASSIC_RCU is not set +# CONFIG_TREE_RCU is not set +CONFIG_PREEMPT_RCU=y +CONFIG_RCU_TRACE=y +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_PREEMPT_RCU_TRACE=y # CONFIG_FREEZER is not set # @@ -135,6 +141,7 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -211,7 +218,6 @@ CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -307,8 +313,6 @@ CONFIG_KEXEC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_RCU=y -CONFIG_RCU_TRACE=y CONFIG_GUSA=y # @@ -326,6 +330,7 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCI_LEGACY is not set # CONFIG_PCI_DEBUG is not set @@ -339,11 +344,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -406,6 +418,7 @@ CONFIG_LLC=m # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -423,8 +436,8 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -467,8 +480,10 @@ CONFIG_MISC_DEVICES=y CONFIG_EEPROM_93CX6=y # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -511,6 +526,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -524,6 +540,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -636,6 +654,7 @@ CONFIG_AX88796_93CX6=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -671,6 +690,7 @@ CONFIG_R8169=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -679,6 +699,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set @@ -732,6 +753,7 @@ CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set # CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set # CONFIG_KEYBOARD_SH_KEYSC is not set # CONFIG_INPUT_MOUSE is not set # CONFIG_INPUT_JOYSTICK is not set @@ -773,6 +795,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -812,6 +835,7 @@ CONFIG_I2C_HELPER_AUTO=y # # I2C system bus drivers (mostly embedded / system-on-chip) # +# CONFIG_I2C_GPIO is not set CONFIG_I2C_HIGHLANDER=y # CONFIG_I2C_OCORES is not set # CONFIG_I2C_SH_MOBILE is not set @@ -838,8 +862,8 @@ CONFIG_I2C_HIGHLANDER=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -851,6 +875,30 @@ CONFIG_I2C_HIGHLANDER=y # CONFIG_I2C_DEBUG_BUS is not set # CONFIG_I2C_DEBUG_CHIP is not set # CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# +# CONFIG_GPIO_BT8XX is not set + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y @@ -863,6 +911,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set # CONFIG_SENSORS_ATXP1 is not set @@ -911,11 +960,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -924,9 +973,13 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TPS65010 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -954,15 +1007,16 @@ CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set # CONFIG_FB_BOOT_VESA_SUPPORT is not set -CONFIG_FB_CFB_FILLRECT=m -CONFIG_FB_CFB_COPYAREA=m -CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m # CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -1000,6 +1054,7 @@ CONFIG_FB_CFB_IMAGEBLIT=m CONFIG_FB_SH_MOBILE_LCDC=m # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1034,9 +1089,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1072,6 +1128,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1158,10 +1215,7 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1291,6 +1345,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_KPROBES_SANITY_TEST is not set @@ -1300,16 +1355,28 @@ CONFIG_FRAME_POINTER=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set CONFIG_EARLY_PRINTK=y @@ -1318,7 +1385,9 @@ CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y CONFIG_4KSTACKS=y # CONFIG_IRQSTACKS is not set -# CONFIG_SH_KGDB is not set +CONFIG_DUMP_CODE=y +# CONFIG_SH_NO_BSS_INIT is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1334,11 +1403,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1422,6 +1495,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/rsk7201_defconfig b/arch/sh/configs/rsk7201_defconfig index 014c18cbf46..64ee69eef47 100644 --- a/arch/sh/configs/rsk7201_defconfig +++ b/arch/sh/configs/rsk7201_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc6 -# Mon Dec 8 14:48:02 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:19:04 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -77,6 +77,7 @@ CONFIG_VM_EVENT_COUNTERS=y # CONFIG_SLUB is not set CONFIG_SLOB=y CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -87,18 +88,15 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -115,6 +113,10 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -185,7 +187,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -563,7 +564,6 @@ CONFIG_RTC_DRV_SH=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -606,10 +606,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -658,22 +655,28 @@ CONFIG_MAGIC_SYSRQ=y CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y # # Tracers # # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -688,6 +691,7 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/rsk7203_defconfig b/arch/sh/configs/rsk7203_defconfig index dcdef31cf19..8d7a5972a86 100644 --- a/arch/sh/configs/rsk7203_defconfig +++ b/arch/sh/configs/rsk7203_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc6 -# Mon Dec 8 14:35:03 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:20:31 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -62,6 +62,7 @@ CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -81,6 +82,7 @@ CONFIG_VM_EVENT_COUNTERS=y # CONFIG_SLUB is not set CONFIG_SLOB=y CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -91,18 +93,15 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -119,6 +118,10 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -189,7 +192,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -313,6 +315,8 @@ CONFIG_NET=y # # Networking options # +# CONFIG_NET_NS is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_PACKET is not set # CONFIG_UNIX is not set # CONFIG_NET_KEY is not set @@ -361,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -376,8 +381,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -509,13 +514,33 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +# CONFIG_MARVELL_PHY is not set +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +CONFIG_SMSC_PHY=y +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set # CONFIG_STNIC is not set # CONFIG_SMC91X is not set -CONFIG_SMC911X=y +# CONFIG_SMC911X is not set +CONFIG_SMSC911X=y # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -611,6 +636,26 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_TCG_TPM is not set # CONFIG_I2C is not set # CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# Memory mapped GPIO expanders: +# + +# +# I2C GPIO expanders: +# + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# # CONFIG_W1 is not set # CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set @@ -685,11 +730,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -697,12 +740,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set CONFIG_THRUSTMASTER_FF=m CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y @@ -847,7 +893,6 @@ CONFIG_RTC_DRV_SH=y # CONFIG_DMADEVICES is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -890,10 +935,7 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -961,6 +1003,7 @@ CONFIG_DEBUG_OBJECTS=y # CONFIG_DEBUG_OBJECTS_SELFTEST is not set # CONFIG_DEBUG_OBJECTS_FREE is not set # CONFIG_DEBUG_OBJECTS_TIMERS is not set +CONFIG_DEBUG_OBJECTS_ENABLE_DEFAULT=1 # CONFIG_DEBUG_RT_MUTEXES is not set # CONFIG_RT_MUTEX_TESTER is not set # CONFIG_DEBUG_SPINLOCK is not set @@ -970,6 +1013,7 @@ CONFIG_DEBUG_MUTEXES=y # CONFIG_LOCK_STAT is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y CONFIG_DEBUG_INFO=y @@ -978,6 +1022,7 @@ CONFIG_DEBUG_WRITECOUNT=y # CONFIG_DEBUG_MEMORY_INIT is not set CONFIG_DEBUG_LIST=y CONFIG_DEBUG_SG=y +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -986,9 +1031,12 @@ CONFIG_FRAME_POINTER=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_HAVE_DYNAMIC_FTRACE=y CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y # # Tracers @@ -997,9 +1045,13 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y CONFIG_EARLY_SCIF_CONSOLE_PORT=0xfffe8000 @@ -1008,6 +1060,9 @@ CONFIG_DEBUG_BOOTMEM=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_IRQSTACKS is not set +CONFIG_DUMP_CODE=y +# CONFIG_SH_NO_BSS_INIT is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1022,6 +1077,7 @@ CONFIG_DEBUG_STACK_USAGE=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/rts7751r2d1_defconfig b/arch/sh/configs/rts7751r2d1_defconfig index 7d2a9e88838..d6680f4382c 100644 --- a/arch/sh/configs/rts7751r2d1_defconfig +++ b/arch/sh/configs/rts7751r2d1_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 18:44:36 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:23:15 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -77,6 +79,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -89,18 +92,15 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -117,6 +117,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -124,6 +128,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -187,7 +192,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -293,6 +297,7 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set @@ -308,11 +313,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -365,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -381,8 +394,8 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -426,6 +439,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -468,6 +482,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -481,6 +496,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -593,6 +610,7 @@ CONFIG_MII=y # CONFIG_SMC91X is not set # CONFIG_ENC28J60 is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -608,7 +626,6 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -622,6 +639,7 @@ CONFIG_8139TOO=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -650,6 +668,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -658,6 +677,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set @@ -755,6 +775,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -777,7 +798,7 @@ CONFIG_SPI_SH_SCI=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set @@ -805,11 +826,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -819,7 +840,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_MFD_SM501=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -852,11 +873,12 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m # CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -895,6 +917,7 @@ CONFIG_FB_SH_MOBILE_LCDC=m CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1031,11 +1054,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -1043,12 +1064,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set CONFIG_THRUSTMASTER_FF=m CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y @@ -1069,6 +1093,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1084,6 +1110,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1094,11 +1122,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1151,6 +1179,7 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1176,6 +1205,7 @@ CONFIG_RTC_INTF_DEV=y # # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set CONFIG_RTC_DRV_R9701=y # CONFIG_RTC_DRV_RS5C348 is not set @@ -1254,10 +1284,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1343,19 +1370,29 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000 CONFIG_EARLY_PRINTK=y -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1371,6 +1408,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1454,6 +1492,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/rts7751r2dplus_defconfig b/arch/sh/configs/rts7751r2dplus_defconfig index f680d3eecdf..3fca10e2483 100644 --- a/arch/sh/configs/rts7751r2dplus_defconfig +++ b/arch/sh/configs/rts7751r2dplus_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 18:47:39 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:26:10 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -77,6 +79,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -89,18 +92,15 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -117,6 +117,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -124,6 +128,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -187,7 +192,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -293,6 +297,7 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set @@ -308,11 +313,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -365,6 +377,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -381,8 +394,8 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -426,6 +439,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -468,6 +482,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -481,6 +496,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -593,6 +610,7 @@ CONFIG_MII=y # CONFIG_SMC91X is not set # CONFIG_ENC28J60 is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -608,7 +626,6 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -622,6 +639,7 @@ CONFIG_8139TOO=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -650,6 +668,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -658,6 +677,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set @@ -755,6 +775,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -777,7 +798,7 @@ CONFIG_SPI_SH_SCI=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set @@ -805,11 +826,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -819,7 +840,7 @@ CONFIG_SSB_POSSIBLE=y CONFIG_MFD_SM501=y # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -852,11 +873,12 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m # CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -895,6 +917,7 @@ CONFIG_FB_SH_MOBILE_LCDC=m CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1031,11 +1054,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -1043,12 +1064,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set CONFIG_THRUSTMASTER_FF=m CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y @@ -1069,6 +1093,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1084,6 +1110,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1094,11 +1122,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1151,6 +1179,7 @@ CONFIG_USB_LIBUSUAL=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1176,6 +1205,7 @@ CONFIG_RTC_INTF_DEV=y # # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set CONFIG_RTC_DRV_R9701=y # CONFIG_RTC_DRV_RS5C348 is not set @@ -1254,10 +1284,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1343,19 +1370,29 @@ CONFIG_FRAME_WARN=1024 CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe80000 CONFIG_EARLY_PRINTK=y -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1371,6 +1408,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1454,6 +1492,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/sdk7780_defconfig b/arch/sh/configs/sdk7780_defconfig index 543287b97a6..5d6b06755ae 100644 --- a/arch/sh/configs/sdk7780_defconfig +++ b/arch/sh/configs/sdk7780_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 18:53:22 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:26:40 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -59,6 +61,7 @@ CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -81,7 +84,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -92,7 +94,6 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -100,11 +101,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y CONFIG_LBD=y # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -121,6 +120,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -129,6 +132,7 @@ CONFIG_CLASSIC_RCU=y CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -199,7 +203,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_RESOURCES_64BIT=y # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -282,7 +285,6 @@ CONFIG_SCHED_HRTICK=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # @@ -300,6 +302,7 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCI_LEGACY is not set CONFIG_PCI_DEBUG=y @@ -334,11 +337,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -434,6 +444,7 @@ CONFIG_NET_SCHED=y # CONFIG_NET_SCH_GRED is not set # CONFIG_NET_SCH_DSMARK is not set # CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set # # Classification @@ -449,6 +460,7 @@ CONFIG_NET_SCHED=y # CONFIG_NET_EMATCH is not set # CONFIG_NET_CLS_ACT is not set CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set # # Network testing @@ -464,8 +476,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -516,6 +528,7 @@ CONFIG_IDE=y # # Please see Documentation/ide/ide.txt for help/info on IDE drives # +CONFIG_IDE_ATAPI=y # CONFIG_BLK_DEV_IDE_SATA is not set CONFIG_IDE_GD=y CONFIG_IDE_GD_ATA=y @@ -525,7 +538,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=y CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -553,6 +565,7 @@ CONFIG_BLK_DEV_GENERIC=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -619,6 +632,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -742,6 +757,7 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set CONFIG_SMC91X=y # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -826,6 +842,7 @@ CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set # CONFIG_MOUSE_PS2_TOUCHKIT is not set # CONFIG_MOUSE_SERIAL is not set # CONFIG_MOUSE_APPLETOUCH is not set @@ -875,6 +892,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_PRINTER is not set @@ -905,11 +923,11 @@ CONFIG_POWER_SUPPLY=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y CONFIG_SSB=y CONFIG_SSB_SPROM=y CONFIG_SSB_PCIHOST_POSSIBLE=y @@ -929,7 +947,7 @@ CONFIG_SSB_DRIVER_PCICORE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -957,15 +975,16 @@ CONFIG_FB=y # CONFIG_FIRMWARE_EDID is not set # CONFIG_FB_DDC is not set # CONFIG_FB_BOOT_VESA_SUPPORT is not set -CONFIG_FB_CFB_FILLRECT=m -CONFIG_FB_CFB_COPYAREA=m -CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m # CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -1003,6 +1022,7 @@ CONFIG_FB_CFB_IMAGEBLIT=m CONFIG_FB_SH_MOBILE_LCDC=m # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -1054,11 +1074,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -1066,12 +1084,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set CONFIG_THRUSTMASTER_FF=m CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y @@ -1092,6 +1113,8 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1106,6 +1129,8 @@ CONFIG_USB_EHCI_HCD=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1116,11 +1141,11 @@ CONFIG_USB_PRINTER=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1176,6 +1201,7 @@ CONFIG_USB_STORAGE=y # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set CONFIG_NEW_LEDS=y @@ -1260,10 +1286,7 @@ CONFIG_TMPFS_POSIX_ACL=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1392,6 +1415,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_FRAME_POINTER is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1400,17 +1424,25 @@ CONFIG_DEBUG_INFO=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_PRINTK is not set @@ -1419,7 +1451,9 @@ CONFIG_DEBUG_STACKOVERFLOW=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set # CONFIG_IRQSTACKS is not set -# CONFIG_SH_KGDB is not set +CONFIG_DUMP_CODE=y +# CONFIG_SH_NO_BSS_INIT is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1435,7 +1469,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1519,6 +1557,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/se7206_defconfig b/arch/sh/configs/se7206_defconfig index 25717ff26ca..e5b55b6f002 100644 --- a/arch/sh/configs/se7206_defconfig +++ b/arch/sh/configs/se7206_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 18:57:39 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:31:27 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set # CONFIG_GENERIC_TIME is not set # CONFIG_GENERIC_CLOCKEVENTS is not set +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -69,6 +71,7 @@ CONFIG_EMBEDDED=y # CONFIG_SYSCTL_SYSCALL is not set CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -84,11 +87,11 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y # CONFIG_SLAB is not set # CONFIG_SLUB is not set CONFIG_SLOB=y CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -99,7 +102,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -107,11 +109,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -128,6 +128,11 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" # CONFIG_CLASSIC_RCU is not set +# CONFIG_TREE_RCU is not set +CONFIG_PREEMPT_RCU=y +CONFIG_RCU_TRACE=y +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_PREEMPT_RCU_TRACE=y # CONFIG_FREEZER is not set # @@ -136,6 +141,7 @@ CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CPU_SH2=y CONFIG_CPU_SH2A=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set CONFIG_CPU_SUBTYPE_SH7206=y # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -197,7 +203,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -281,8 +286,6 @@ CONFIG_KEXEC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_RCU=y -CONFIG_RCU_TRACE=y CONFIG_GUSA=y # @@ -296,10 +299,6 @@ CONFIG_CMDLINE="console=ttySC3,115200 ignore_loglevel earlyprintk=serial" # # Bus options # -CONFIG_CF_ENABLER=y -# CONFIG_CF_AREA5 is not set -CONFIG_CF_AREA6=y -CONFIG_CF_BASE_ADDR=0xb8000000 # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set @@ -312,11 +311,19 @@ CONFIG_BINFMT_ZFLAT=y CONFIG_BINFMT_SHARED_FLAT=y # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +# CONFIG_NET_NS is not set +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -372,6 +379,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -387,8 +395,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -500,6 +508,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_MISC_DEVICES=y CONFIG_EEPROM_93CX6=y # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -526,6 +535,7 @@ CONFIG_MII=y # CONFIG_STNIC is not set CONFIG_SMC91X=y # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -598,11 +608,11 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -612,7 +622,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -732,10 +742,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=y - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -812,6 +819,7 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_LOCK_STAT is not set CONFIG_DEBUG_SPINLOCK_SLEEP=y # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set @@ -820,6 +828,7 @@ CONFIG_DEBUG_VM=y # CONFIG_DEBUG_MEMORY_INIT is not set CONFIG_DEBUG_LIST=y # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set @@ -827,20 +836,35 @@ CONFIG_FRAME_POINTER=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DEBUG_BOOTMEM is not set CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_IRQSTACKS is not set +CONFIG_DUMP_CODE=y +# CONFIG_SH_NO_BSS_INIT is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -856,7 +880,11 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_HASH=y +CONFIG_CRYPTO_HASH2=y # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -890,7 +918,7 @@ CONFIG_CRYPTO_ALGAPI=y # # Digest # -# CONFIG_CRYPTO_CRC32C is not set +CONFIG_CRYPTO_CRC32C=y # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set @@ -939,6 +967,7 @@ CONFIG_CRYPTO_LZO=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y CONFIG_CRC16=y # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/se7343_defconfig b/arch/sh/configs/se7343_defconfig index be246f38150..39005257703 100644 --- a/arch/sh/configs/se7343_defconfig +++ b/arch/sh/configs/se7343_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc6 -# Thu Dec 4 16:40:25 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:33:53 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -78,7 +80,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -88,7 +89,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -96,11 +96,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -117,6 +115,10 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -190,7 +192,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -280,7 +281,6 @@ CONFIG_CMDLINE="console=ttySC0,115200" # # Bus options # -# CONFIG_CF_ENABLER is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set @@ -291,11 +291,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -347,6 +354,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -362,8 +370,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -661,8 +669,8 @@ CONFIG_I2C_SH_MOBILE=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -693,6 +701,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set # CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set @@ -743,11 +752,13 @@ CONFIG_V4L_USB_DRIVERS=y # CONFIG_USB_VIDEO_CLASS is not set CONFIG_USB_GSPCA=m # CONFIG_USB_M5602 is not set +# CONFIG_USB_STV06XX is not set # CONFIG_USB_GSPCA_CONEX is not set # CONFIG_USB_GSPCA_ETOMS is not set # CONFIG_USB_GSPCA_FINEPIX is not set # CONFIG_USB_GSPCA_MARS is not set # CONFIG_USB_GSPCA_OV519 is not set +# CONFIG_USB_GSPCA_OV534 is not set # CONFIG_USB_GSPCA_PAC207 is not set # CONFIG_USB_GSPCA_PAC7311 is not set # CONFIG_USB_GSPCA_SONIXB is not set @@ -786,6 +797,7 @@ CONFIG_RADIO_ADAPTERS=y # CONFIG_USB_DSBR is not set # CONFIG_USB_SI470X is not set # CONFIG_USB_MR800 is not set +# CONFIG_RADIO_TEA5764 is not set # CONFIG_DAB is not set # @@ -797,15 +809,16 @@ CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set # CONFIG_FB_BOOT_VESA_SUPPORT is not set -CONFIG_FB_CFB_FILLRECT=m -CONFIG_FB_CFB_COPYAREA=m -CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m # CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -881,11 +894,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -893,12 +904,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set # CONFIG_THRUSTMASTER_FF is not set # CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y @@ -997,7 +1011,6 @@ CONFIG_UIO=y # CONFIG_UIO_SMX is not set # CONFIG_UIO_SERCOS3 is not set # CONFIG_STAGING is not set -CONFIG_STAGING_EXCLUDE_BUILD=y # # File systems @@ -1051,10 +1064,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1138,11 +1148,12 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y # # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set CONFIG_EARLY_SCIF_CONSOLE=y CONFIG_EARLY_SCIF_CONSOLE_PORT=0xffe00000 CONFIG_EARLY_PRINTK=y -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1158,6 +1169,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1240,6 +1252,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/se7619_defconfig b/arch/sh/configs/se7619_defconfig index db9cacd7c4e..932b0235b1d 100644 --- a/arch/sh/configs/se7619_defconfig +++ b/arch/sh/configs/se7619_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 19:03:29 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:36:46 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set # CONFIG_GENERIC_TIME is not set # CONFIG_GENERIC_CLOCKEVENTS is not set +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -61,12 +63,10 @@ CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_AIO=y # CONFIG_VM_EVENT_COUNTERS is not set -CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y @@ -74,12 +74,10 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -96,6 +94,10 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -103,6 +105,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH2=y CONFIG_CPU_SUBTYPE_SH7619=y +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -164,7 +167,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -244,7 +246,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # # Bus options # -# CONFIG_CF_ENABLER is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # @@ -256,6 +257,12 @@ CONFIG_BINFMT_ZFLAT=y # CONFIG_BINFMT_SHARED_FLAT is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set # CONFIG_NET is not set # @@ -359,6 +366,7 @@ CONFIG_BLK_DEV=y CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -439,11 +447,11 @@ CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -453,7 +461,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -506,7 +514,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set @@ -557,10 +565,7 @@ CONFIG_PROC_SYSCTL=y # CONFIG_SYSFS is not set # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -602,12 +607,19 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -621,6 +633,7 @@ CONFIG_HAVE_FTRACE=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/se7705_defconfig b/arch/sh/configs/se7705_defconfig index d88190fdd7c..8574d6eb00a 100644 --- a/arch/sh/configs/se7705_defconfig +++ b/arch/sh/configs/se7705_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 19:04:52 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:37:50 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -68,12 +70,10 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y @@ -83,17 +83,14 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -110,6 +107,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -117,6 +118,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -180,7 +182,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -258,7 +259,6 @@ CONFIG_HZ=250 # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set @@ -272,10 +272,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # # Bus options # -CONFIG_CF_ENABLER=y -# CONFIG_CF_AREA5 is not set -CONFIG_CF_AREA6=y -CONFIG_CF_BASE_ADDR=0xb8000000 # CONFIG_ARCH_SUPPORTS_MSI is not set # @@ -285,11 +281,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -345,6 +348,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -360,8 +364,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -465,6 +469,7 @@ CONFIG_BLK_DEV_RAM_SIZE=8192 CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -491,6 +496,7 @@ CONFIG_NET_ETHERNET=y CONFIG_STNIC=y # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -583,6 +589,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=y @@ -609,11 +616,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -623,7 +630,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -677,7 +684,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set @@ -734,10 +741,7 @@ CONFIG_PROC_PAGE_MONITOR=y # CONFIG_TMPFS is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -806,13 +810,19 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -827,6 +837,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -909,6 +920,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/se7712_defconfig b/arch/sh/configs/se7712_defconfig index 869ab1737de..e31ea84f116 100644 --- a/arch/sh/configs/se7712_defconfig +++ b/arch/sh/configs/se7712_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 19:08:12 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:40:12 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -15,6 +15,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -55,6 +57,7 @@ CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -71,12 +74,10 @@ CONFIG_EVENTFD=y # CONFIG_SHMEM is not set CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -87,18 +88,15 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -115,6 +113,10 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -122,6 +124,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -185,7 +188,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -277,10 +279,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda1" # # Bus options # -CONFIG_CF_ENABLER=y -# CONFIG_CF_AREA5 is not set -CONFIG_CF_AREA6=y -CONFIG_CF_BASE_ADDR=0xb8000000 # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set @@ -291,11 +289,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -376,6 +381,7 @@ CONFIG_NET_SCH_TBF=y CONFIG_NET_SCH_GRED=y CONFIG_NET_SCH_DSMARK=y CONFIG_NET_SCH_NETEM=y +# CONFIG_NET_SCH_DRR is not set # # Classification @@ -394,6 +400,7 @@ CONFIG_NET_CLS_FW=y # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set # # Network testing @@ -410,8 +417,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -518,6 +525,7 @@ CONFIG_BLK_DEV=y CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -560,6 +568,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -591,6 +600,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=y @@ -600,6 +612,7 @@ CONFIG_MII=y CONFIG_SH_ETH=y # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -658,6 +671,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set CONFIG_HW_RANDOM=m @@ -672,11 +686,11 @@ CONFIG_HW_RANDOM=m # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -686,7 +700,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -730,7 +744,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set @@ -748,6 +762,7 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set @@ -809,10 +824,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -902,6 +914,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -910,16 +923,24 @@ CONFIG_FRAME_POINTER=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DEBUG_BOOTMEM is not set @@ -927,7 +948,9 @@ CONFIG_HAVE_FTRACE=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set # CONFIG_IRQSTACKS is not set -# CONFIG_SH_KGDB is not set +# CONFIG_DUMP_CODE is not set +# CONFIG_SH_NO_BSS_INIT is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -943,11 +966,16 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1030,6 +1058,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/se7721_defconfig b/arch/sh/configs/se7721_defconfig index b52be14074d..ad1bace3ad4 100644 --- a/arch/sh/configs/se7721_defconfig +++ b/arch/sh/configs/se7721_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 19:12:06 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:43:33 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -15,6 +15,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -59,6 +61,7 @@ CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -75,12 +78,10 @@ CONFIG_EVENTFD=y # CONFIG_SHMEM is not set CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -91,18 +92,15 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -119,6 +117,10 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -126,6 +128,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -189,7 +192,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -280,10 +282,6 @@ CONFIG_CMDLINE="console=ttySC0,115200 root=/dev/sda2" # # Bus options # -CONFIG_CF_ENABLER=y -# CONFIG_CF_AREA5 is not set -CONFIG_CF_AREA6=y -CONFIG_CF_BASE_ADDR=0xb8000000 # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set @@ -294,11 +292,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -379,6 +384,7 @@ CONFIG_NET_SCH_TBF=y CONFIG_NET_SCH_GRED=y CONFIG_NET_SCH_DSMARK=y CONFIG_NET_SCH_NETEM=y +# CONFIG_NET_SCH_DRR is not set # # Classification @@ -397,6 +403,7 @@ CONFIG_NET_CLS_FW=y # CONFIG_NET_CLS_ACT is not set CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set # # Network testing @@ -413,8 +420,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -522,6 +529,7 @@ CONFIG_BLK_DEV=y CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -673,6 +681,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set @@ -686,11 +695,11 @@ CONFIG_UNIX98_PTYS=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -700,7 +709,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -750,11 +759,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -762,12 +769,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set CONFIG_THRUSTMASTER_FF=m CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y @@ -788,19 +798,21 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -811,11 +823,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -883,6 +895,7 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y # CONFIG_LEDS_TRIGGER_TIMER is not set # CONFIG_LEDS_TRIGGER_HEARTBEAT is not set +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set # CONFIG_ACCESSIBILITY is not set # CONFIG_RTC_CLASS is not set @@ -947,10 +960,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1063,6 +1073,7 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1071,16 +1082,24 @@ CONFIG_FRAME_POINTER=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DEBUG_BOOTMEM is not set @@ -1088,7 +1107,9 @@ CONFIG_HAVE_FTRACE=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set # CONFIG_IRQSTACKS is not set -# CONFIG_SH_KGDB is not set +# CONFIG_DUMP_CODE is not set +# CONFIG_SH_NO_BSS_INIT is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1104,11 +1125,16 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1191,6 +1217,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/se7722_defconfig b/arch/sh/configs/se7722_defconfig index e6df51f098f..abb189a1d31 100644 --- a/arch/sh/configs/se7722_defconfig +++ b/arch/sh/configs/se7722_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 19:15:10 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:46:59 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -75,13 +77,11 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y -# CONFIG_MARKERS is not set # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -93,7 +93,6 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -101,11 +100,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -122,6 +119,10 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -132,6 +133,7 @@ CONFIG_CPU_SH4A=y CONFIG_CPU_SH4AL_DSP=y CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -207,7 +209,6 @@ CONFIG_SPARSEMEM_STATIC=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -287,7 +288,6 @@ CONFIG_KEXEC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # @@ -300,10 +300,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # # Bus options # -CONFIG_CF_ENABLER=y -# CONFIG_CF_AREA5 is not set -CONFIG_CF_AREA6=y -CONFIG_CF_BASE_ADDR=0xb8000000 # CONFIG_ARCH_SUPPORTS_MSI is not set # CONFIG_PCCARD is not set @@ -314,11 +310,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -371,6 +374,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -386,8 +390,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -420,6 +424,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -462,6 +467,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -485,6 +491,7 @@ CONFIG_MII=y # CONFIG_STNIC is not set CONFIG_SMC91X=y # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -577,6 +584,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -604,11 +612,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -618,7 +626,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -672,7 +680,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set @@ -774,10 +782,7 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -831,14 +836,20 @@ CONFIG_DEBUG_FS=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_PRINTK is not set -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -854,6 +865,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -936,6 +948,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/se7750_defconfig b/arch/sh/configs/se7750_defconfig index a577099c324..ac874f63a62 100644 --- a/arch/sh/configs/se7750_defconfig +++ b/arch/sh/configs/se7750_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 19:17:29 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:49:22 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -72,12 +74,10 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -88,18 +88,15 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -116,6 +113,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -123,6 +124,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -186,7 +188,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -278,10 +279,6 @@ CONFIG_BOOT_LINK_OFFSET=0x00800000 # # Bus options # -CONFIG_CF_ENABLER=y -# CONFIG_CF_AREA5 is not set -CONFIG_CF_AREA6=y -CONFIG_CF_BASE_ADDR=0xb8000000 # CONFIG_ARCH_SUPPORTS_MSI is not set # @@ -291,11 +288,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -352,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -367,8 +372,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -469,6 +474,7 @@ CONFIG_BLK_DEV=y CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -481,7 +487,6 @@ CONFIG_IDE_GD_ATA=y # CONFIG_IDE_GD_ATAPI is not set # CONFIG_BLK_DEV_IDECD is not set # CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -530,6 +535,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set # CONFIG_ATA is not set @@ -548,6 +554,7 @@ CONFIG_NET_ETHERNET=y CONFIG_STNIC=y # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -610,6 +617,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -645,11 +653,11 @@ CONFIG_WATCHDOG=y # CONFIG_SOFT_WATCHDOG is not set CONFIG_SH_WDT=y # CONFIG_SH_WDT_MMAP is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -659,7 +667,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -703,7 +711,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set @@ -761,10 +769,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -847,13 +852,19 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -869,6 +880,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -951,6 +963,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/se7751_defconfig b/arch/sh/configs/se7751_defconfig index d99a6bdf410..f54ae056f17 100644 --- a/arch/sh/configs/se7751_defconfig +++ b/arch/sh/configs/se7751_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 19:21:12 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:51:47 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -72,12 +74,10 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -88,18 +88,15 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -116,6 +113,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -123,6 +124,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -186,7 +188,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -280,7 +281,6 @@ CONFIG_CMDLINE="console=ttySC1,38400" # # Bus options # -# CONFIG_CF_ENABLER is not set # CONFIG_ARCH_SUPPORTS_MSI is not set # @@ -290,11 +290,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -370,6 +377,7 @@ CONFIG_IP_NF_QUEUE=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -385,8 +393,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -490,6 +498,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -516,6 +525,7 @@ CONFIG_MII=y # CONFIG_STNIC is not set # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -570,6 +580,7 @@ CONFIG_DEVKMEM=y # # CONFIG_SERIAL_SH_SCI is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -604,11 +615,11 @@ CONFIG_WATCHDOG=y # # CONFIG_SOFT_WATCHDOG is not set # CONFIG_SH_WDT is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -618,7 +629,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -662,7 +673,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set @@ -722,10 +733,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -787,13 +795,19 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -809,6 +823,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -891,6 +906,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/se7780_defconfig b/arch/sh/configs/se7780_defconfig index ad95b80bb19..7504978e874 100644 --- a/arch/sh/configs/se7780_defconfig +++ b/arch/sh/configs/se7780_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 19:27:30 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:53:50 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -74,7 +76,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y @@ -84,18 +85,15 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set CONFIG_MODULE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_INTEGRITY is not set # @@ -111,6 +109,10 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -119,6 +121,7 @@ CONFIG_CLASSIC_RCU=y CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -185,7 +188,6 @@ CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -274,11 +276,11 @@ CONFIG_CMDLINE="console=ttySC0.115200 root=/dev/sda1" # # Bus options # -# CONFIG_CF_ENABLER is not set CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -294,6 +296,7 @@ CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -349,6 +352,7 @@ CONFIG_IPV6=y # CONFIG_IPX is not set # CONFIG_ATALK is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -363,8 +367,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # @@ -533,6 +537,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -569,11 +575,13 @@ CONFIG_SATA_SIL=y # CONFIG_SATA_VIA is not set # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set +# CONFIG_PATA_ALI is not set # CONFIG_PATA_AMD is not set # CONFIG_PATA_ARTOP is not set # CONFIG_PATA_ATIIXP is not set # CONFIG_PATA_CMD64X is not set # CONFIG_PATA_CS5520 is not set +# CONFIG_PATA_CS5530 is not set # CONFIG_PATA_EFAR is not set # CONFIG_ATA_GENERIC is not set # CONFIG_PATA_HPT366 is not set @@ -585,10 +593,15 @@ CONFIG_SATA_SIL=y # CONFIG_PATA_MPIIX is not set # CONFIG_PATA_OLDPIIX is not set # CONFIG_PATA_NETCELL is not set +# CONFIG_PATA_NS87410 is not set +# CONFIG_PATA_NS87415 is not set +# CONFIG_PATA_PDC_OLD is not set # CONFIG_PATA_RZ1000 is not set +# CONFIG_PATA_SC1200 is not set # CONFIG_PATA_SERVERWORKS is not set # CONFIG_PATA_PDC2027X is not set # CONFIG_PATA_SIL680 is not set +# CONFIG_PATA_SIS is not set # CONFIG_PATA_VIA is not set # CONFIG_PATA_WINBOND is not set # CONFIG_PATA_PLATFORM is not set @@ -627,6 +640,9 @@ CONFIG_SMSC_PHY=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y @@ -639,6 +655,7 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set CONFIG_SMC91X=y # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -654,7 +671,6 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -663,6 +679,7 @@ CONFIG_NET_PCI=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -754,6 +771,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set # CONFIG_LEGACY_PTYS is not set # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set @@ -779,11 +797,11 @@ CONFIG_HWMON=y CONFIG_THERMAL=y # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -793,7 +811,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -821,15 +839,16 @@ CONFIG_FB=y CONFIG_FIRMWARE_EDID=y # CONFIG_FB_DDC is not set # CONFIG_FB_BOOT_VESA_SUPPORT is not set -CONFIG_FB_CFB_FILLRECT=m -CONFIG_FB_CFB_COPYAREA=m -CONFIG_FB_CFB_IMAGEBLIT=m +# CONFIG_FB_CFB_FILLRECT is not set +# CONFIG_FB_CFB_COPYAREA is not set +# CONFIG_FB_CFB_IMAGEBLIT is not set # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m # CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -865,6 +884,7 @@ CONFIG_FB_CFB_IMAGEBLIT=m CONFIG_FB_SH_MOBILE_LCDC=m # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -912,11 +932,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -924,12 +942,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set CONFIG_THRUSTMASTER_FF=m CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y @@ -949,6 +970,7 @@ CONFIG_USB_DEVICEFS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -974,11 +996,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1094,10 +1116,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_HFSPLUS_FS is not set # CONFIG_JFFS2_FS is not set CONFIG_CRAMFS=y @@ -1188,13 +1207,19 @@ CONFIG_DEBUG_FS=y # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1210,6 +1235,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set @@ -1288,6 +1314,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/sh03_defconfig b/arch/sh/configs/sh03_defconfig index 95f0f5d5b63..04bde1e9696 100644 --- a/arch/sh/configs/sh03_defconfig +++ b/arch/sh/configs/sh03_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 19:31:54 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 17:56:46 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -79,6 +81,7 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=m CONFIG_HAVE_OPROFILE=y @@ -91,7 +94,6 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -99,11 +101,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_MODVERSIONS=y # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -120,6 +120,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -127,6 +131,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -190,7 +195,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -268,7 +272,6 @@ CONFIG_HZ=250 # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set @@ -284,14 +287,11 @@ CONFIG_CMDLINE="console=ttySC1,115200 mem=64M root=/dev/nfs" # # Bus options # -CONFIG_CF_ENABLER=y -CONFIG_CF_AREA5=y -# CONFIG_CF_AREA6 is not set -CONFIG_CF_BASE_ADDR=0xb4000000 CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCCARD is not set @@ -307,11 +307,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -369,6 +376,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -384,8 +392,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -427,6 +435,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y CONFIG_IDE=y @@ -441,7 +450,6 @@ CONFIG_IDE_GD_ATA=y CONFIG_BLK_DEV_IDECD=m CONFIG_BLK_DEV_IDECD_VERBOSE_ERRORS=y CONFIG_BLK_DEV_IDETAPE=m -# CONFIG_BLK_DEV_IDESCSI is not set # CONFIG_IDE_TASK_IOCTL is not set CONFIG_IDE_PROC_FS=y @@ -466,6 +474,7 @@ CONFIG_IDE_PROC_FS=y # CONFIG_BLK_DEV_JMICRON is not set # CONFIG_BLK_DEV_SC1200 is not set # CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_IT8172 is not set # CONFIG_BLK_DEV_IT8213 is not set # CONFIG_BLK_DEV_IT821X is not set # CONFIG_BLK_DEV_NS87415 is not set @@ -519,6 +528,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -532,6 +542,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -583,6 +595,7 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -598,7 +611,6 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -608,6 +620,7 @@ CONFIG_8139CP=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -636,6 +649,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -644,6 +658,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set @@ -734,6 +749,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -782,11 +798,11 @@ CONFIG_SH_WDT=m # # CONFIG_PCIPCWATCHDOG is not set # CONFIG_WDTPCI is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -796,7 +812,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -856,9 +872,10 @@ CONFIG_USB_ARCH_HAS_EHCI=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -883,6 +900,7 @@ CONFIG_EXT3_FS_POSIX_ACL=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -930,10 +948,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1048,21 +1063,31 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_EARLY_PRINTK is not set -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1078,11 +1103,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1166,6 +1195,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=y # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/sh7710voipgw_defconfig b/arch/sh/configs/sh7710voipgw_defconfig index 9a768b28adc..1b869f452ad 100644 --- a/arch/sh/configs/sh7710voipgw_defconfig +++ b/arch/sh/configs/sh7710voipgw_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 19:35:18 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 18:00:31 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -74,12 +76,10 @@ CONFIG_EVENTFD=y # CONFIG_SHMEM is not set CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -89,7 +89,6 @@ CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -97,11 +96,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -118,6 +115,10 @@ CONFIG_DEFAULT_DEADLINE=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="deadline" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -125,6 +126,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -188,7 +190,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -287,11 +288,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -378,6 +386,7 @@ CONFIG_NET_SCH_CBQ=y # CONFIG_NET_SCH_GRED is not set # CONFIG_NET_SCH_DSMARK is not set # CONFIG_NET_SCH_NETEM is not set +# CONFIG_NET_SCH_DRR is not set # # Classification @@ -398,6 +407,7 @@ CONFIG_NET_CLS_U32=y # CONFIG_NET_CLS_ACT is not set # CONFIG_NET_CLS_IND is not set CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set # # Network testing @@ -413,8 +423,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -519,6 +529,7 @@ CONFIG_BLK_DEV=y CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -546,6 +557,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_SH_ETH is not set # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -638,11 +650,11 @@ CONFIG_HW_RANDOM=y # CONFIG_HWMON is not set CONFIG_THERMAL=y # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -652,7 +664,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -706,7 +718,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set @@ -763,10 +775,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -828,13 +837,19 @@ CONFIG_DEBUG_FS=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -850,6 +865,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -932,6 +948,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/sh7763rdp_defconfig b/arch/sh/configs/sh7763rdp_defconfig index 6a77f691fb8..ba33aca75af 100644 --- a/arch/sh/configs/sh7763rdp_defconfig +++ b/arch/sh/configs/sh7763rdp_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 19:37:12 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 18:02:28 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -79,11 +81,11 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -96,18 +98,15 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set # CONFIG_MODULE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -124,6 +123,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -132,6 +135,7 @@ CONFIG_CLASSIC_RCU=y CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -199,7 +203,6 @@ CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -297,11 +300,19 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +# CONFIG_NET_NS is not set +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -357,6 +368,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -373,8 +385,8 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -529,6 +541,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set # CONFIG_ATA is not set @@ -555,6 +568,9 @@ CONFIG_PHYLIB=y # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_FIXED_PHY is not set CONFIG_MDIO_BITBANG=y CONFIG_NET_ETHERNET=y @@ -564,6 +580,7 @@ CONFIG_MII=y CONFIG_SH_ETH=y # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -655,6 +672,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -670,11 +688,11 @@ CONFIG_HW_RANDOM=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -684,7 +702,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -737,6 +755,7 @@ CONFIG_FB_BOTH_ENDIAN=y CONFIG_FB_SH7760=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -781,19 +800,21 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set CONFIG_USB_OHCI_HCD=y # CONFIG_USB_OHCI_BIG_ENDIAN_DESC is not set # CONFIG_USB_OHCI_BIG_ENDIAN_MMIO is not set CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -804,11 +825,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -897,6 +918,7 @@ CONFIG_EXT3_FS_XATTR=y # CONFIG_EXT3_FS_SECURITY is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set CONFIG_FS_MBCACHE=y # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set @@ -942,10 +964,7 @@ CONFIG_TMPFS_POSIX_ACL=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1038,20 +1057,30 @@ CONFIG_TRACE_IRQFLAGS_SUPPORT=y CONFIG_FRAME_WARN=1024 # CONFIG_MAGIC_SYSRQ is not set # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_BUGVERBOSE is not set # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1067,6 +1096,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1149,6 +1179,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set CONFIG_CRC_T10DIF=y diff --git a/arch/sh/configs/sh7785lcr_defconfig b/arch/sh/configs/sh7785lcr_defconfig index 07e33c285b9..1d63628df6f 100644 --- a/arch/sh/configs/sh7785lcr_defconfig +++ b/arch/sh/configs/sh7785lcr_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 19:49:23 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 18:05:18 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y @@ -86,7 +88,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set CONFIG_PROFILING=y -# CONFIG_MARKERS is not set # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -98,7 +99,6 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -106,11 +106,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -127,6 +125,10 @@ CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -136,6 +138,7 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -206,7 +209,6 @@ CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -285,7 +287,6 @@ CONFIG_KEXEC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # @@ -302,6 +303,7 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set @@ -315,11 +317,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -380,6 +389,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -396,8 +406,8 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -757,6 +767,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -823,8 +834,8 @@ CONFIG_I2C_PCA_PLATFORM=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -842,11 +853,11 @@ CONFIG_I2C_PCA_PLATFORM=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -855,9 +866,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set CONFIG_MFD_SM501=y # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -889,11 +903,12 @@ CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y # CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -# CONFIG_FB_SYS_FILLRECT is not set -# CONFIG_FB_SYS_COPYAREA is not set -# CONFIG_FB_SYS_IMAGEBLIT is not set +CONFIG_FB_SYS_FILLRECT=m +CONFIG_FB_SYS_COPYAREA=m +CONFIG_FB_SYS_IMAGEBLIT=m # CONFIG_FB_FOREIGN_ENDIAN is not set -# CONFIG_FB_SYS_FOPS is not set +CONFIG_FB_SYS_FOPS=m +CONFIG_FB_DEFERRED_IO=y # CONFIG_FB_SVGALIB is not set # CONFIG_FB_MACMODES is not set # CONFIG_FB_BACKLIGHT is not set @@ -932,6 +947,7 @@ CONFIG_FB_SH_MOBILE_LCDC=m CONFIG_FB_SM501=y # CONFIG_FB_VIRTUAL is not set # CONFIG_FB_METRONOME is not set +# CONFIG_FB_MB862XX is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set # @@ -976,11 +992,9 @@ CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y -CONFIG_HID_BRIGHT=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y -CONFIG_HID_DELL=y CONFIG_HID_EZKEY=y CONFIG_HID_GYRATION=y CONFIG_HID_LOGITECH=y @@ -988,12 +1002,15 @@ CONFIG_HID_LOGITECH=y # CONFIG_LOGIRUMBLEPAD2_FF is not set CONFIG_HID_MICROSOFT=y CONFIG_HID_MONTEREY=y +# CONFIG_HID_NTRIG is not set CONFIG_HID_PANTHERLORD=y # CONFIG_PANTHERLORD_FF is not set CONFIG_HID_PETALYNX=y CONFIG_HID_SAMSUNG=y CONFIG_HID_SONY=y CONFIG_HID_SUNPLUS=y +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set CONFIG_THRUSTMASTER_FF=m CONFIG_ZEROPLUS_FF=m CONFIG_USB_SUPPORT=y @@ -1014,6 +1031,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1031,6 +1050,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set CONFIG_USB_R8A66597_HCD=y +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1041,11 +1062,11 @@ CONFIG_USB_R8A66597_HCD=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1100,6 +1121,7 @@ CONFIG_USB_TEST=m # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1135,6 +1157,7 @@ CONFIG_RTC_DRV_RS5C372=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1220,10 +1243,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1353,6 +1373,7 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_FRAME_POINTER is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1361,17 +1382,25 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DEBUG_BOOTMEM is not set @@ -1379,7 +1408,9 @@ CONFIG_HAVE_FTRACE=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set # CONFIG_IRQSTACKS is not set -# CONFIG_SH_KGDB is not set +# CONFIG_DUMP_CODE is not set +# CONFIG_SH_NO_BSS_INIT is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1395,11 +1426,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1482,6 +1517,7 @@ CONFIG_CRYPTO_DES=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/shmin_defconfig b/arch/sh/configs/shmin_defconfig index e2b38a33497..8ba10e1e08c 100644 --- a/arch/sh/configs/shmin_defconfig +++ b/arch/sh/configs/shmin_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 19:52:59 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 18:09:00 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -15,6 +15,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -65,12 +67,10 @@ CONFIG_EVENTFD=y # CONFIG_SHMEM is not set CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y # CONFIG_SLAB is not set # CONFIG_SLUB is not set CONFIG_SLOB=y # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y @@ -78,12 +78,10 @@ CONFIG_HAVE_KRETPROBES=y CONFIG_HAVE_ARCH_TRACEHOOK=y CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=1 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -100,6 +98,10 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -107,6 +109,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH3=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -170,7 +173,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -268,11 +270,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_PACKET is not set CONFIG_UNIX=y CONFIG_XFRM=y @@ -327,6 +336,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -342,8 +352,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -448,6 +458,7 @@ CONFIG_BLK_DEV_LOOP=y CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -474,6 +485,7 @@ CONFIG_NET_ETHERNET=y # CONFIG_STNIC is not set # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -532,6 +544,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -547,11 +560,11 @@ CONFIG_HW_RANDOM=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -561,7 +574,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -605,7 +618,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set @@ -660,10 +673,7 @@ CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -723,14 +733,20 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set CONFIG_EARLY_PRINTK=y -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -745,6 +761,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -826,6 +843,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/shx3_defconfig b/arch/sh/configs/shx3_defconfig index ae5cbe237ff..ed90a7e8109 100644 --- a/arch/sh/configs/shx3_defconfig +++ b/arch/sh/configs/shx3_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Tue Oct 21 12:16:25 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 18:10:57 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -18,6 +18,8 @@ CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_LOCKBREAK=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_SMP=y CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_STACKTRACE_SUPPORT=y @@ -79,6 +81,7 @@ CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_STRIP_GENERATED=y # CONFIG_KALLSYMS_EXTRA_PASS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y @@ -95,11 +98,11 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y # CONFIG_SLAB is not set # CONFIG_SLUB is not set CONFIG_SLOB=y CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -113,7 +116,6 @@ CONFIG_USE_GENERIC_SMP_HELPERS=y CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -121,12 +123,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_STOP_MACHINE=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -143,6 +143,11 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_CLASSIC_RCU is not set +# CONFIG_TREE_RCU is not set +CONFIG_PREEMPT_RCU=y +CONFIG_RCU_TRACE=y +# CONFIG_TREE_RCU_TRACE is not set +CONFIG_PREEMPT_RCU_TRACE=y CONFIG_FREEZER=y # @@ -152,6 +157,7 @@ CONFIG_CPU_SH4=y CONFIG_CPU_SH4A=y CONFIG_CPU_SHX3=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -230,7 +236,6 @@ CONFIG_MEMORY_HOTPLUG_SPARSE=y CONFIG_MEMORY_HOTREMOVE=y CONFIG_SPLIT_PTLOCK_CPUS=4 CONFIG_MIGRATION=y -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -323,8 +328,6 @@ CONFIG_NR_CPUS=4 # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -CONFIG_PREEMPT_RCU=y -CONFIG_RCU_TRACE=y # # Boot options @@ -347,11 +350,19 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=y + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +# CONFIG_NET_NS is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_PACKET is not set # CONFIG_UNIX is not set CONFIG_XFRM=y @@ -424,6 +435,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -479,7 +491,9 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # CONFIG_BLK_DEV_HD is not set CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -522,6 +536,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -546,6 +561,7 @@ CONFIG_MII=y CONFIG_SMC91X=y # CONFIG_ENC28J60 is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -613,6 +629,7 @@ CONFIG_SERIAL_SH_SCI_CONSOLE=y CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -653,8 +670,8 @@ CONFIG_I2C_HELPER_AUTO=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set @@ -678,7 +695,7 @@ CONFIG_SPI_MASTER=y # # SPI Protocol Masters # -# CONFIG_SPI_AT25 is not set +# CONFIG_EEPROM_AT25 is not set # CONFIG_SPI_SPIDEV is not set # CONFIG_SPI_TLE62X0 is not set # CONFIG_W1 is not set @@ -699,11 +716,11 @@ CONFIG_WATCHDOG=y # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -715,6 +732,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_TMIO is not set # CONFIG_MFD_WM8400 is not set # CONFIG_MFD_WM8350_I2C is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -763,15 +781,17 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_SL811_HCD is not set CONFIG_USB_R8A66597_HCD=m +# CONFIG_USB_HWA_HCD is not set # CONFIG_USB_GADGET_MUSB_HDRC is not set # @@ -783,11 +803,11 @@ CONFIG_USB_R8A66597_HCD=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # # CONFIG_USB_STORAGE is not set # CONFIG_USB_LIBUSUAL is not set @@ -890,12 +910,14 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_M41T80 is not set # CONFIG_RTC_DRV_S35390A is not set # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers # # CONFIG_RTC_DRV_M41T94 is not set # CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1390 is not set # CONFIG_RTC_DRV_MAX6902 is not set # CONFIG_RTC_DRV_R9701 is not set # CONFIG_RTC_DRV_RS5C348 is not set @@ -981,10 +1003,7 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1049,6 +1068,7 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set CONFIG_DEBUG_BUGVERBOSE=y # CONFIG_DEBUG_INFO is not set @@ -1057,6 +1077,7 @@ CONFIG_DEBUG_VM=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_KPROBES_SANITY_TEST is not set @@ -1066,16 +1087,28 @@ CONFIG_FRAME_POINTER=y # CONFIG_FAULT_INJECTION is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_FTRACE_STARTUP_TEST is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set CONFIG_SH_STANDARD_BIOS=y # CONFIG_EARLY_SCIF_CONSOLE is not set CONFIG_EARLY_PRINTK=y @@ -1083,7 +1116,9 @@ CONFIG_EARLY_PRINTK=y CONFIG_DEBUG_STACKOVERFLOW=y CONFIG_DEBUG_STACK_USAGE=y # CONFIG_IRQSTACKS is not set -# CONFIG_SH_KGDB is not set +CONFIG_DUMP_CODE=y +# CONFIG_SH_NO_BSS_INIT is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1099,6 +1134,7 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set # CONFIG_CRYPTO_MANAGER is not set +# CONFIG_CRYPTO_MANAGER2 is not set # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1181,6 +1217,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/snapgear_defconfig b/arch/sh/configs/snapgear_defconfig index b4ca5110958..98377e50265 100644 --- a/arch/sh/configs/snapgear_defconfig +++ b/arch/sh/configs/snapgear_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 19:55:03 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 18:14:08 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -76,7 +78,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y CONFIG_HAVE_IOREMAP_PROT=y CONFIG_HAVE_KPROBES=y @@ -86,13 +87,11 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 # CONFIG_MODULES is not set CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -109,6 +108,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -116,6 +119,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -179,7 +183,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -282,6 +285,7 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y @@ -292,11 +296,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_PACKET is not set # CONFIG_UNIX is not set # CONFIG_NET_KEY is not set @@ -342,6 +353,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -357,8 +369,8 @@ CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set # CONFIG_WIRELESS_OLD_REGULATORY is not set # CONFIG_WIRELESS_EXT is not set +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -515,6 +527,7 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -530,7 +543,6 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -544,6 +556,7 @@ CONFIG_8139TOO_PIO=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -624,6 +637,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -641,11 +655,11 @@ CONFIG_DEVPORT=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -655,7 +669,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -689,6 +703,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_SOUND is not set # CONFIG_HID_SUPPORT is not set # CONFIG_USB_SUPPORT is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -746,10 +761,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -801,13 +813,19 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -822,6 +840,7 @@ CONFIG_HAVE_FTRACE=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/systemh_defconfig b/arch/sh/configs/systemh_defconfig index 1711f0f70d7..72703bf57af 100644 --- a/arch/sh/configs/systemh_defconfig +++ b/arch/sh/configs/systemh_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 19:56:48 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 18:15:56 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y CONFIG_HAVE_LATENCYTOP_SUPPORT=y @@ -68,12 +70,10 @@ CONFIG_EVENTFD=y CONFIG_SHMEM=y CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y -CONFIG_PCI_QUIRKS=y CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -84,7 +84,6 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -92,11 +91,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -113,6 +110,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -120,6 +121,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -183,7 +185,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -264,7 +265,6 @@ CONFIG_HZ=250 # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # CONFIG_GUSA_RB is not set @@ -288,6 +288,12 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set # CONFIG_NET is not set # @@ -314,6 +320,7 @@ CONFIG_BLK_DEV_RAM_SIZE=1024 CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -360,6 +367,7 @@ CONFIG_DEVKMEM=y # # CONFIG_SERIAL_SH_SCI is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -387,11 +395,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -401,7 +409,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -444,7 +452,7 @@ CONFIG_USB_ARCH_HAS_HCD=y # # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set @@ -501,10 +509,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -546,13 +551,19 @@ CONFIG_FRAME_WARN=1024 # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -567,6 +578,7 @@ CONFIG_HAVE_FTRACE=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/titan_defconfig b/arch/sh/configs/titan_defconfig index ea3c5e838fc..01fc1defb33 100644 --- a/arch/sh/configs/titan_defconfig +++ b/arch/sh/configs/titan_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27 -# Wed Oct 22 19:58:12 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 18:17:19 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_PCI=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -79,7 +81,6 @@ CONFIG_SLAB=y # CONFIG_SLUB is not set # CONFIG_SLOB is not set # CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set CONFIG_HAVE_IOREMAP_PROT=y @@ -90,7 +91,6 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -98,11 +98,9 @@ CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -119,6 +117,10 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -126,6 +128,7 @@ CONFIG_CLASSIC_RCU=y # CONFIG_CPU_SH4=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -189,7 +192,6 @@ CONFIG_FLAT_NODE_MEM_MAP=y CONFIG_SPARSEMEM_STATIC=y CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -293,6 +295,7 @@ CONFIG_PCI=y CONFIG_SH_PCIDMA_NONCOHERENT=y CONFIG_PCI_AUTO=y CONFIG_PCI_AUTO_UPDATE_RESOURCES=y +# CONFIG_PCIEPORTBUS is not set # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set @@ -309,11 +312,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -507,6 +517,7 @@ CONFIG_NET_SCH_TBF=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m +# CONFIG_NET_SCH_DRR is not set CONFIG_NET_SCH_INGRESS=m # @@ -543,6 +554,7 @@ CONFIG_NET_ACT_PEDIT=m # CONFIG_NET_ACT_SKBEDIT is not set CONFIG_NET_CLS_IND=y CONFIG_NET_SCH_FIFO=y +# CONFIG_DCB is not set # # Network testing @@ -560,12 +572,8 @@ CONFIG_WIRELESS=y # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -CONFIG_IEEE80211=y -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=y -CONFIG_IEEE80211_CRYPT_CCMP=y -CONFIG_IEEE80211_CRYPT_TKIP=y # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -695,6 +703,7 @@ CONFIG_MISC_DEVICES=y # CONFIG_TIFM_CORE is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -738,6 +747,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_SCSI_CXGB3_ISCSI is not set # CONFIG_BLK_DEV_3W_XXXX_RAID is not set # CONFIG_SCSI_3W_9XXX is not set # CONFIG_SCSI_ACARD is not set @@ -751,6 +761,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -807,6 +819,9 @@ CONFIG_CICADA_PHY=m # CONFIG_BROADCOM_PHY is not set # CONFIG_ICPLUS_PHY is not set # CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set # CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y @@ -818,6 +833,7 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -833,7 +849,6 @@ CONFIG_NET_PCI=y # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -847,6 +862,7 @@ CONFIG_8139_OLD_RX_RESET=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set @@ -875,6 +891,7 @@ CONFIG_NETDEV_1000=y # CONFIG_JME is not set CONFIG_NETDEV_10000=y # CONFIG_CHELSIO_T1 is not set +CONFIG_CHELSIO_T3_DEPENDS=y # CONFIG_CHELSIO_T3 is not set # CONFIG_ENIC is not set # CONFIG_IXGBE is not set @@ -883,6 +900,7 @@ CONFIG_NETDEV_10000=y # CONFIG_MYRI10GE is not set # CONFIG_NETXEN_NIC is not set # CONFIG_NIU is not set +# CONFIG_MLX4_EN is not set # CONFIG_MLX4_CORE is not set # CONFIG_TEHUTI is not set # CONFIG_BNX2X is not set @@ -1002,6 +1020,7 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_IPMI_HANDLER is not set @@ -1055,11 +1074,11 @@ CONFIG_SH_WDT=m # USB-based Watchdog Cards # # CONFIG_USBPCWATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -1069,7 +1088,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_WM8400 is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -1145,6 +1164,8 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set CONFIG_USB_MON=y +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1162,6 +1183,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1172,11 +1195,11 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1273,6 +1296,7 @@ CONFIG_USB_SERIAL_PL2303=m # CONFIG_USB_ISIGHTFW is not set # CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set # CONFIG_MEMSTICK is not set # CONFIG_NEW_LEDS is not set @@ -1379,10 +1403,7 @@ CONFIG_TMPFS=y # CONFIG_HUGETLBFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1530,6 +1551,7 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_FRAME_POINTER is not set # CONFIG_RCU_TORTURE_TEST is not set # CONFIG_RCU_CPU_STALL_DETECTOR is not set @@ -1537,16 +1559,24 @@ CONFIG_SCHED_DEBUG=y # CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y -# CONFIG_FTRACE is not set +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set # CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set # CONFIG_DEBUG_BOOTMEM is not set @@ -1554,7 +1584,9 @@ CONFIG_HAVE_FTRACE=y # CONFIG_DEBUG_STACK_USAGE is not set # CONFIG_4KSTACKS is not set # CONFIG_IRQSTACKS is not set -# CONFIG_SH_KGDB is not set +# CONFIG_DUMP_CODE is not set +# CONFIG_SH_NO_BSS_INIT is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1570,11 +1602,16 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set CONFIG_CRYPTO_NULL=m # CONFIG_CRYPTO_CRYPTD is not set @@ -1659,6 +1696,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y CONFIG_CRC_CCITT=m CONFIG_CRC16=m # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/configs/ul2_defconfig b/arch/sh/configs/ul2_defconfig index 9afff67d9ff..27f968a959f 100644 --- a/arch/sh/configs/ul2_defconfig +++ b/arch/sh/configs/ul2_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.28-rc2 -# Tue Oct 28 17:35:17 2008 +# Linux kernel version: 2.6.28 +# Fri Jan 9 18:22:53 2009 # CONFIG_SUPERH=y CONFIG_SUPERH32=y @@ -16,6 +16,8 @@ CONFIG_GENERIC_IRQ_PROBE=y # CONFIG_GENERIC_GPIO is not set CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y +# CONFIG_ARCH_SUSPEND_POSSIBLE is not set +# CONFIG_ARCH_HIBERNATION_POSSIBLE is not set CONFIG_SYS_SUPPORTS_NUMA=y CONFIG_STACKTRACE_SUPPORT=y CONFIG_LOCKDEP_SUPPORT=y @@ -80,7 +82,6 @@ CONFIG_SLUB_DEBUG=y CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y -# CONFIG_MARKERS is not set # CONFIG_OPROFILE is not set CONFIG_HAVE_OPROFILE=y # CONFIG_KPROBES is not set @@ -92,7 +93,6 @@ CONFIG_HAVE_CLK=y CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -100,11 +100,9 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -121,6 +119,10 @@ CONFIG_IOSCHED_NOOP=y CONFIG_DEFAULT_NOOP=y CONFIG_DEFAULT_IOSCHED="noop" CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_FREEZER is not set # @@ -131,6 +133,7 @@ CONFIG_CPU_SH4A=y CONFIG_CPU_SH4AL_DSP=y CONFIG_CPU_SHX2=y # CONFIG_CPU_SUBTYPE_SH7619 is not set +# CONFIG_CPU_SUBTYPE_SH7201 is not set # CONFIG_CPU_SUBTYPE_SH7203 is not set # CONFIG_CPU_SUBTYPE_SH7206 is not set # CONFIG_CPU_SUBTYPE_SH7263 is not set @@ -206,7 +209,6 @@ CONFIG_SPARSEMEM_STATIC=y # CONFIG_MEMORY_HOTPLUG is not set CONFIG_SPLIT_PTLOCK_CPUS=4 # CONFIG_MIGRATION is not set -# CONFIG_RESOURCES_64BIT is not set # CONFIG_PHYS_ADDR_T_64BIT is not set CONFIG_ZONE_DMA_FLAG=0 CONFIG_NR_QUICK=2 @@ -283,7 +285,6 @@ CONFIG_KEXEC=y # CONFIG_PREEMPT_NONE is not set # CONFIG_PREEMPT_VOLUNTARY is not set CONFIG_PREEMPT=y -# CONFIG_PREEMPT_RCU is not set CONFIG_GUSA=y # @@ -307,11 +308,18 @@ CONFIG_BINFMT_ELF=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set # CONFIG_HAVE_AOUT is not set # CONFIG_BINFMT_MISC is not set + +# +# Power management options (EXPERIMENTAL) +# +# CONFIG_PM is not set +# CONFIG_CPU_IDLE is not set CONFIG_NET=y # # Networking options # +CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -367,6 +375,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing @@ -380,10 +389,12 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_PHONET is not set CONFIG_WIRELESS=y CONFIG_CFG80211=y +# CONFIG_CFG80211_REG_DEBUG is not set CONFIG_NL80211=y # CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +CONFIG_LIB80211=m CONFIG_MAC80211=y # @@ -397,11 +408,6 @@ CONFIG_MAC80211_RC_DEFAULT="pid" # CONFIG_MAC80211_MESH is not set # CONFIG_MAC80211_LEDS is not set # CONFIG_MAC80211_DEBUG_MENU is not set -CONFIG_IEEE80211=m -CONFIG_IEEE80211_DEBUG=y -CONFIG_IEEE80211_CRYPT_WEP=m -CONFIG_IEEE80211_CRYPT_CCMP=m -CONFIG_IEEE80211_CRYPT_TKIP=m # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -510,6 +516,7 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 CONFIG_MISC_DEVICES=y # CONFIG_EEPROM_93CX6 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_C2PORT is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -552,6 +559,7 @@ CONFIG_SCSI_WAIT_SCAN=m # CONFIG_SCSI_SRP_ATTRS is not set CONFIG_SCSI_LOWLEVEL=y # CONFIG_ISCSI_TCP is not set +# CONFIG_LIBFC is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_DH is not set CONFIG_ATA=y @@ -575,6 +583,7 @@ CONFIG_MII=y # CONFIG_STNIC is not set # CONFIG_SMC91X is not set # CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set @@ -714,11 +723,11 @@ CONFIG_HWMON=y # CONFIG_THERMAL is not set # CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -728,6 +737,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set # CONFIG_MFD_TMIO is not set +# CONFIG_REGULATOR is not set # # Multimedia devices @@ -785,7 +795,6 @@ CONFIG_USB_MON=y # # CONFIG_USB_C67X00_HCD is not set # CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_SL811_HCD is not set CONFIG_USB_R8A66597_HCD=y # CONFIG_SUPERH_ON_CHIP_R8A66597 is not set @@ -800,11 +809,11 @@ CONFIG_USB_R8A66597_HCD=y # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; # # -# may also be needed; see USB_STORAGE Help for more information +# see USB_STORAGE Help for more information # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -937,10 +946,7 @@ CONFIG_TMPFS=y CONFIG_HUGETLBFS=y CONFIG_HUGETLB_PAGE=y # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1046,13 +1052,19 @@ CONFIG_FRAME_WARN=1024 # CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_LATENCYTOP is not set # CONFIG_SYSCTL_SYSCALL_CHECK is not set -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FTRACE=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y + +# +# Tracers +# # CONFIG_DYNAMIC_PRINTK_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y # CONFIG_SH_STANDARD_BIOS is not set # CONFIG_EARLY_SCIF_CONSOLE is not set -# CONFIG_SH_KGDB is not set +# CONFIG_MORE_COMPILE_OPTIONS is not set # # Security options @@ -1068,11 +1080,15 @@ CONFIG_CRYPTO=y # # CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_AEAD=y +CONFIG_CRYPTO_ALGAPI2=y +CONFIG_CRYPTO_AEAD2=y CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_RNG=y +CONFIG_CRYPTO_HASH2=y +CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_MANAGER=y +CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set # CONFIG_CRYPTO_CRYPTD is not set @@ -1155,6 +1171,7 @@ CONFIG_CRYPTO_HW=y # Library routines # CONFIG_BITREVERSE=y +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set # CONFIG_CRC_T10DIF is not set diff --git a/arch/sh/include/asm/posix_types_32.h b/arch/sh/include/asm/posix_types_32.h index 0a3d2f54ab2..2172732c55c 100644 --- a/arch/sh/include/asm/posix_types_32.h +++ b/arch/sh/include/asm/posix_types_32.h @@ -39,14 +39,10 @@ typedef long long __kernel_loff_t; #endif typedef struct { -#if defined(__KERNEL__) || defined(__USE_ALL) int val[2]; -#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ - int __val[2]; -#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ } __kernel_fsid_t; -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) +#if defined(__KERNEL__) #undef __FD_SET static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) @@ -117,6 +113,6 @@ static __inline__ void __FD_ZERO(__kernel_fd_set *__p) } } -#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ +#endif /* defined(__KERNEL__) */ #endif /* __ASM_SH_POSIX_TYPES_H */ diff --git a/arch/sh/include/asm/posix_types_64.h b/arch/sh/include/asm/posix_types_64.h index 0620317a6f0..f83e9bd463d 100644 --- a/arch/sh/include/asm/posix_types_64.h +++ b/arch/sh/include/asm/posix_types_64.h @@ -48,14 +48,10 @@ typedef long long __kernel_loff_t; #endif typedef struct { -#if defined(__KERNEL__) || defined(__USE_ALL) int val[2]; -#else /* !defined(__KERNEL__) && !defined(__USE_ALL) */ - int __val[2]; -#endif /* !defined(__KERNEL__) && !defined(__USE_ALL) */ } __kernel_fsid_t; -#if defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) +#if defined(__KERNEL__) #undef __FD_SET static __inline__ void __FD_SET(unsigned long __fd, __kernel_fd_set *__fdsetp) @@ -126,6 +122,6 @@ static __inline__ void __FD_ZERO(__kernel_fd_set *__p) } } -#endif /* defined(__KERNEL__) || !defined(__GLIBC__) || (__GLIBC__ < 2) */ +#endif /* defined(__KERNEL__) */ #endif /* __ASM_SH64_POSIX_TYPES_H */ diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c index 0623e377f48..4ff4dc64520 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7343.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7343.c @@ -112,6 +112,34 @@ static struct platform_device veu_device = { .num_resources = ARRAY_SIZE(veu_resources), }; +static struct uio_info jpu_platform_data = { + .name = "JPU", + .version = "0", + .irq = 27, +}; + +static struct resource jpu_resources[] = { + [0] = { + .name = "JPU", + .start = 0xfea00000, + .end = 0xfea102d3, + .flags = IORESOURCE_MEM, + }, + [1] = { + /* place holder for contiguous memory */ + }, +}; + +static struct platform_device jpu_device = { + .name = "uio_pdrv_genirq", + .id = 2, + .dev = { + .platform_data = &jpu_platform_data, + }, + .resource = jpu_resources, + .num_resources = ARRAY_SIZE(jpu_resources), +}; + static struct plat_sci_port sci_platform_data[] = { { .mapbase = 0xffe00000, @@ -152,6 +180,7 @@ static struct platform_device *sh7343_devices[] __initdata = { &sci_device, &vpu_device, &veu_device, + &jpu_device, }; static int __init sh7343_devices_setup(void) @@ -160,9 +189,11 @@ static int __init sh7343_devices_setup(void) clk_always_enable("xymem0"); /* XYMEM */ clk_always_enable("veu0"); /* VEU */ clk_always_enable("vpu0"); /* VPU */ + clk_always_enable("jpu0"); /* JPU */ platform_resource_setup_memory(&vpu_device, "vpu", 1 << 20); platform_resource_setup_memory(&veu_device, "veu", 2 << 20); + platform_resource_setup_memory(&jpu_device, "jpu", 2 << 20); return platform_add_devices(sh7343_devices, ARRAY_SIZE(sh7343_devices)); diff --git a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c index 50cf6838ec4..5146afc156e 100644 --- a/arch/sh/kernel/cpu/sh4a/setup-sh7722.c +++ b/arch/sh/kernel/cpu/sh4a/setup-sh7722.c @@ -158,7 +158,7 @@ static struct resource jpu_resources[] = { [0] = { .name = "JPU", .start = 0xfea00000, - .end = 0xfea102d0, + .end = 0xfea102d3, .flags = IORESOURCE_MEM, }, [1] = { diff --git a/arch/sh/kernel/process_64.c b/arch/sh/kernel/process_64.c index a7e5f2e74ba..c90c7e5e5fe 100644 --- a/arch/sh/kernel/process_64.c +++ b/arch/sh/kernel/process_64.c @@ -520,7 +520,6 @@ asmlinkage int sys_execve(char *ufilename, char **uargv, int error; char *filename; - lock_kernel(); filename = getname((char __user *)ufilename); error = PTR_ERR(filename); if (IS_ERR(filename)) @@ -537,7 +536,6 @@ asmlinkage int sys_execve(char *ufilename, char **uargv, } putname(filename); out: - unlock_kernel(); return error; } diff --git a/arch/sh/kernel/traps_32.c b/arch/sh/kernel/traps_32.c index c0aa3d83ec0..60dcf87ed01 100644 --- a/arch/sh/kernel/traps_32.c +++ b/arch/sh/kernel/traps_32.c @@ -125,20 +125,18 @@ static inline void die_if_kernel(const char *str, struct pt_regs *regs, * - userspace errors just cause EFAULT to be returned, resulting in SEGV * - kernel/userspace interfaces cause a jump to an appropriate handler * - other kernel errors are bad - * - return 0 if fixed-up, -EFAULT if non-fatal (to the kernel) fault */ -static int die_if_no_fixup(const char * str, struct pt_regs * regs, long err) +static void die_if_no_fixup(const char * str, struct pt_regs * regs, long err) { if (!user_mode(regs)) { const struct exception_table_entry *fixup; fixup = search_exception_tables(regs->pc); if (fixup) { regs->pc = fixup->fixup; - return 0; + return; } die(str, regs, err); } - return -EFAULT; } static inline void sign_extend(unsigned int count, unsigned char *dst) @@ -314,7 +312,8 @@ static int handle_unaligned_ins(opcode_t instruction, struct pt_regs *regs, /* Argh. Address not only misaligned but also non-existent. * Raise an EFAULT and see if it's trapped */ - return die_if_no_fixup("Fault in unaligned fixup", regs, 0); + die_if_no_fixup("Fault in unaligned fixup", regs, 0); + return -EFAULT; } /* diff --git a/arch/sh/mm/ioremap_64.c b/arch/sh/mm/ioremap_64.c index 6e0be24d26e..31e1bb5effb 100644 --- a/arch/sh/mm/ioremap_64.c +++ b/arch/sh/mm/ioremap_64.c @@ -71,9 +71,9 @@ void *__ioremap(unsigned long phys_addr, unsigned long size, * Ok, go for it.. */ area = get_vm_area(size, VM_IOREMAP); - pr_debug("Get vm_area returns %p addr %p\n",area,area->addr); if (!area) return NULL; + pr_debug("Get vm_area returns %p addr %p\n", area, area->addr); area->phys_addr = phys_addr; addr = area->addr; if (ioremap_page_range((unsigned long)addr, (unsigned long)addr + size, diff --git a/arch/sparc/Kconfig b/arch/sparc/Kconfig index de58c02633b..c3ea215334f 100644 --- a/arch/sparc/Kconfig +++ b/arch/sparc/Kconfig @@ -36,6 +36,7 @@ config SPARC64 select HAVE_KRETPROBES select HAVE_KPROBES select HAVE_LMB + select HAVE_SYSCALL_WRAPPERS select USE_GENERIC_SMP_HELPERS if SMP select RTC_DRV_CMOS select RTC_DRV_BQ4802 diff --git a/arch/sparc/configs/sparc64_defconfig b/arch/sparc/configs/sparc64_defconfig index cde19ae78f5..ade49941def 100644 --- a/arch/sparc/configs/sparc64_defconfig +++ b/arch/sparc/configs/sparc64_defconfig @@ -867,8 +867,8 @@ CONFIG_I2C_ALGOBIT=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/sparc/kernel/central.c b/arch/sparc/kernel/central.c index 05f1c916db0..f3b5466c389 100644 --- a/arch/sparc/kernel/central.c +++ b/arch/sparc/kernel/central.c @@ -103,6 +103,7 @@ static int __devinit clock_board_probe(struct of_device *op, p->leds_resource.name = "leds"; p->leds_pdev.name = "sunfire-clockboard-leds"; + p->leds_pdev.id = -1; p->leds_pdev.resource = &p->leds_resource; p->leds_pdev.num_resources = 1; p->leds_pdev.dev.parent = &op->dev; @@ -197,6 +198,7 @@ static int __devinit fhc_probe(struct of_device *op, p->leds_resource.name = "leds"; p->leds_pdev.name = "sunfire-fhc-leds"; + p->leds_pdev.id = p->board_num; p->leds_pdev.resource = &p->leds_resource; p->leds_pdev.num_resources = 1; p->leds_pdev.dev.parent = &op->dev; diff --git a/arch/sparc/kernel/cpu.c b/arch/sparc/kernel/cpu.c index f0b825505da..32d32b4824f 100644 --- a/arch/sparc/kernel/cpu.c +++ b/arch/sparc/kernel/cpu.c @@ -239,14 +239,26 @@ unsigned int fsr_storage; static void set_cpu_and_fpu(int psr_impl, int psr_vers, int fpu_vers) { + const struct manufacturer_info *manuf; + int i; + sparc_cpu_type = NULL; sparc_fpu_type = NULL; - if (psr_impl < ARRAY_SIZE(manufacturer_info)) + manuf = NULL; + + for (i = 0; i < ARRAY_SIZE(manufacturer_info); i++) + { + if (psr_impl == manufacturer_info[i].psr_impl) { + manuf = &manufacturer_info[i]; + break; + } + } + if (manuf != NULL) { const struct cpu_info *cpu; const struct fpu_info *fpu; - cpu = &manufacturer_info[psr_impl].cpu_info[0]; + cpu = &manuf->cpu_info[0]; while (cpu->psr_vers != -1) { if (cpu->psr_vers == psr_vers) { @@ -256,7 +268,7 @@ static void set_cpu_and_fpu(int psr_impl, int psr_vers, int fpu_vers) } cpu++; } - fpu = &manufacturer_info[psr_impl].fpu_info[0]; + fpu = &manuf->fpu_info[0]; while (fpu->fp_vers != -1) { if (fpu->fp_vers == fpu_vers) { diff --git a/arch/sparc/kernel/irq_64.c b/arch/sparc/kernel/irq_64.c index cab8e028687..4ac5c651e00 100644 --- a/arch/sparc/kernel/irq_64.c +++ b/arch/sparc/kernel/irq_64.c @@ -247,9 +247,10 @@ struct irq_handler_data { #ifdef CONFIG_SMP static int irq_choose_cpu(unsigned int virt_irq) { - cpumask_t mask = irq_desc[virt_irq].affinity; + cpumask_t mask; int cpuid; + cpumask_copy(&mask, irq_desc[virt_irq].affinity); if (cpus_equal(mask, CPU_MASK_ALL)) { static int irq_rover; static DEFINE_SPINLOCK(irq_rover_lock); @@ -854,7 +855,7 @@ void fixup_irqs(void) !(irq_desc[irq].status & IRQ_PER_CPU)) { if (irq_desc[irq].chip->set_affinity) irq_desc[irq].chip->set_affinity(irq, - &irq_desc[irq].affinity); + irq_desc[irq].affinity); } spin_unlock_irqrestore(&irq_desc[irq].lock, flags); } diff --git a/arch/sparc/kernel/sys_sparc_64.c b/arch/sparc/kernel/sys_sparc_64.c index 09058fc39e7..e2d102447a4 100644 --- a/arch/sparc/kernel/sys_sparc_64.c +++ b/arch/sparc/kernel/sys_sparc_64.c @@ -399,7 +399,7 @@ void arch_pick_mmap_layout(struct mm_struct *mm) } } -asmlinkage unsigned long sparc_brk(unsigned long brk) +SYSCALL_DEFINE1(sparc_brk, unsigned long, brk) { /* People could try to be nasty and use ta 0x6d in 32bit programs */ if (test_thread_flag(TIF_32BIT) && brk >= STACK_TOP32) @@ -415,7 +415,7 @@ asmlinkage unsigned long sparc_brk(unsigned long brk) * sys_pipe() is the normal C calling standard for creating * a pipe. It's not the way unix traditionally does this, though. */ -asmlinkage long sparc_pipe(struct pt_regs *regs) +SYSCALL_DEFINE1(sparc_pipe_real, struct pt_regs *, regs) { int fd[2]; int error; @@ -435,8 +435,8 @@ out: * This is really horribly ugly. */ -asmlinkage long sys_ipc(unsigned int call, int first, unsigned long second, - unsigned long third, void __user *ptr, long fifth) +SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, unsigned long, second, + unsigned long, third, void __user *, ptr, long, fifth) { long err; @@ -519,7 +519,7 @@ out: return err; } -asmlinkage long sparc64_newuname(struct new_utsname __user *name) +SYSCALL_DEFINE1(sparc64_newuname, struct new_utsname __user *, name) { int ret = sys_newuname(name); @@ -530,7 +530,7 @@ asmlinkage long sparc64_newuname(struct new_utsname __user *name) return ret; } -asmlinkage long sparc64_personality(unsigned long personality) +SYSCALL_DEFINE1(sparc64_personality, unsigned long, personality) { int ret; @@ -564,9 +564,9 @@ int sparc_mmap_check(unsigned long addr, unsigned long len) } /* Linux version of mmap */ -asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, unsigned long fd, - unsigned long off) +SYSCALL_DEFINE6(mmap, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, unsigned long, fd, + unsigned long, off) { struct file * file = NULL; unsigned long retval = -EBADF; @@ -589,7 +589,7 @@ out: return retval; } -asmlinkage long sys64_munmap(unsigned long addr, size_t len) +SYSCALL_DEFINE2(64_munmap, unsigned long, addr, size_t, len) { long ret; @@ -606,9 +606,9 @@ extern unsigned long do_mremap(unsigned long addr, unsigned long old_len, unsigned long new_len, unsigned long flags, unsigned long new_addr); -asmlinkage unsigned long sys64_mremap(unsigned long addr, - unsigned long old_len, unsigned long new_len, - unsigned long flags, unsigned long new_addr) +SYSCALL_DEFINE5(64_mremap, unsigned long, addr, unsigned long, old_len, + unsigned long, new_len, unsigned long, flags, + unsigned long, new_addr) { unsigned long ret = -EINVAL; @@ -671,7 +671,7 @@ asmlinkage void sparc_breakpoint(struct pt_regs *regs) extern void check_pending(int signum); -asmlinkage long sys_getdomainname(char __user *name, int len) +SYSCALL_DEFINE2(getdomainname, char __user *, name, int, len) { int nlen, err; @@ -694,11 +694,10 @@ out: return err; } -asmlinkage long sys_utrap_install(utrap_entry_t type, - utrap_handler_t new_p, - utrap_handler_t new_d, - utrap_handler_t __user *old_p, - utrap_handler_t __user *old_d) +SYSCALL_DEFINE5(utrap_install, utrap_entry_t, type, + utrap_handler_t, new_p, utrap_handler_t, new_d, + utrap_handler_t __user *, old_p, + utrap_handler_t __user *, old_d) { if (type < UT_INSTRUCTION_EXCEPTION || type > UT_TRAP_INSTRUCTION_31) return -EINVAL; @@ -764,11 +763,9 @@ asmlinkage long sparc_memory_ordering(unsigned long model, return 0; } -asmlinkage long sys_rt_sigaction(int sig, - const struct sigaction __user *act, - struct sigaction __user *oact, - void __user *restorer, - size_t sigsetsize) +SYSCALL_DEFINE5(rt_sigaction, int, sig, const struct sigaction __user *, act, + struct sigaction __user *, oact, void __user *, restorer, + size_t, sigsetsize) { struct k_sigaction new_ka, old_ka; int ret; @@ -808,7 +805,8 @@ asmlinkage void update_perfctrs(void) reset_pic(); } -asmlinkage long sys_perfctr(int opcode, unsigned long arg0, unsigned long arg1, unsigned long arg2) +SYSCALL_DEFINE4(perfctr, int, opcode, unsigned long, arg0, + unsigned long, arg1, unsigned long, arg2) { int err = 0; diff --git a/arch/sparc/kernel/syscalls.S b/arch/sparc/kernel/syscalls.S index 87f5a3b8a25..d150c2aa98d 100644 --- a/arch/sparc/kernel/syscalls.S +++ b/arch/sparc/kernel/syscalls.S @@ -21,7 +21,7 @@ execve_merge: .align 32 sys_sparc_pipe: - ba,pt %xcc, sparc_pipe + ba,pt %xcc, sys_sparc_pipe_real add %sp, PTREGS_OFF, %o0 sys_nis_syscall: ba,pt %xcc, c_sys_nis_syscall diff --git a/arch/sparc/kernel/systbls.h b/arch/sparc/kernel/systbls.h index bc9f5dac406..15c2d752b2b 100644 --- a/arch/sparc/kernel/systbls.h +++ b/arch/sparc/kernel/systbls.h @@ -16,9 +16,6 @@ extern asmlinkage long sys_ipc(unsigned int call, int first, void __user *ptr, long fifth); extern asmlinkage long sparc64_newuname(struct new_utsname __user *name); extern asmlinkage long sparc64_personality(unsigned long personality); -extern asmlinkage unsigned long sys_mmap(unsigned long addr, unsigned long len, - unsigned long prot, unsigned long flags, - unsigned long fd, unsigned long off); extern asmlinkage long sys64_munmap(unsigned long addr, size_t len); extern asmlinkage unsigned long sys64_mremap(unsigned long addr, unsigned long old_len, diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index e6007bb3704..f93c42a2b52 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -21,7 +21,7 @@ sys_call_table32: /*0*/ .word sys_restart_syscall, sys32_exit, sys_fork, sys_read, sys_write /*5*/ .word sys32_open, sys_close, sys32_wait4, sys32_creat, sys_link /*10*/ .word sys_unlink, sunos_execv, sys_chdir, sys_chown16, sys32_mknod -/*15*/ .word sys_chmod, sys_lchown16, sparc_brk, sys32_perfctr, sys32_lseek +/*15*/ .word sys_chmod, sys_lchown16, sys_sparc_brk, sys32_perfctr, sys32_lseek /*20*/ .word sys_getpid, sys_capget, sys_capset, sys_setuid16, sys_getuid16 /*25*/ .word sys32_vmsplice, compat_sys_ptrace, sys_alarm, sys32_sigaltstack, sys_pause /*30*/ .word compat_sys_utime, sys_lchown, sys_fchown, sys32_access, sys32_nice @@ -55,8 +55,8 @@ sys_call_table32: /*170*/ .word sys32_lsetxattr, sys32_fsetxattr, sys_getxattr, sys_lgetxattr, compat_sys_getdents .word sys_setsid, sys_fchdir, sys32_fgetxattr, sys_listxattr, sys_llistxattr /*180*/ .word sys32_flistxattr, sys_removexattr, sys_lremovexattr, compat_sys_sigpending, sys_ni_syscall - .word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sparc64_newuname -/*190*/ .word sys32_init_module, sparc64_personality, sys_remap_file_pages, sys32_epoll_create, sys32_epoll_ctl + .word sys32_setpgid, sys32_fremovexattr, sys32_tkill, sys32_exit_group, sys_sparc64_newuname +/*190*/ .word sys32_init_module, sys_sparc64_personality, sys_remap_file_pages, sys32_epoll_create, sys32_epoll_ctl .word sys32_epoll_wait, sys32_ioprio_set, sys_getppid, sys32_sigaction, sys_sgetmask /*200*/ .word sys32_ssetmask, sys_sigsuspend, compat_sys_newlstat, sys_uselib, compat_sys_old_readdir .word sys32_readahead, sys32_socketcall, sys32_syslog, sys32_lookup_dcookie, sys32_fadvise64 @@ -95,7 +95,7 @@ sys_call_table: /*0*/ .word sys_restart_syscall, sparc_exit, sys_fork, sys_read, sys_write /*5*/ .word sys_open, sys_close, sys_wait4, sys_creat, sys_link /*10*/ .word sys_unlink, sys_nis_syscall, sys_chdir, sys_chown, sys_mknod -/*15*/ .word sys_chmod, sys_lchown, sparc_brk, sys_perfctr, sys_lseek +/*15*/ .word sys_chmod, sys_lchown, sys_sparc_brk, sys_perfctr, sys_lseek /*20*/ .word sys_getpid, sys_capget, sys_capset, sys_setuid, sys_getuid /*25*/ .word sys_vmsplice, sys_ptrace, sys_alarm, sys_sigaltstack, sys_nis_syscall /*30*/ .word sys_utime, sys_nis_syscall, sys_nis_syscall, sys_access, sys_nice @@ -106,7 +106,7 @@ sys_call_table: .word sys_reboot, sys_nis_syscall, sys_symlink, sys_readlink, sys_execve /*60*/ .word sys_umask, sys_chroot, sys_newfstat, sys_fstat64, sys_getpagesize .word sys_msync, sys_vfork, sys_pread64, sys_pwrite64, sys_nis_syscall -/*70*/ .word sys_nis_syscall, sys_mmap, sys_nis_syscall, sys64_munmap, sys_mprotect +/*70*/ .word sys_nis_syscall, sys_mmap, sys_nis_syscall, sys_64_munmap, sys_mprotect .word sys_madvise, sys_vhangup, sys_nis_syscall, sys_mincore, sys_getgroups /*80*/ .word sys_setgroups, sys_getpgrp, sys_nis_syscall, sys_setitimer, sys_nis_syscall .word sys_swapon, sys_getitimer, sys_nis_syscall, sys_sethostname, sys_nis_syscall @@ -129,8 +129,8 @@ sys_call_table: /*170*/ .word sys_lsetxattr, sys_fsetxattr, sys_getxattr, sys_lgetxattr, sys_getdents .word sys_setsid, sys_fchdir, sys_fgetxattr, sys_listxattr, sys_llistxattr /*180*/ .word sys_flistxattr, sys_removexattr, sys_lremovexattr, sys_nis_syscall, sys_ni_syscall - .word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sparc64_newuname -/*190*/ .word sys_init_module, sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl + .word sys_setpgid, sys_fremovexattr, sys_tkill, sys_exit_group, sys_sparc64_newuname +/*190*/ .word sys_init_module, sys_sparc64_personality, sys_remap_file_pages, sys_epoll_create, sys_epoll_ctl .word sys_epoll_wait, sys_ioprio_set, sys_getppid, sys_nis_syscall, sys_sgetmask /*200*/ .word sys_ssetmask, sys_nis_syscall, sys_newlstat, sys_uselib, sys_nis_syscall .word sys_readahead, sys_socketcall, sys_syslog, sys_lookup_dcookie, sys_fadvise64 @@ -142,7 +142,7 @@ sys_call_table: .word sys_fstatfs64, sys_llseek, sys_mlock, sys_munlock, sys_mlockall /*240*/ .word sys_munlockall, sys_sched_setparam, sys_sched_getparam, sys_sched_setscheduler, sys_sched_getscheduler .word sys_sched_yield, sys_sched_get_priority_max, sys_sched_get_priority_min, sys_sched_rr_get_interval, sys_nanosleep -/*250*/ .word sys64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl +/*250*/ .word sys_64_mremap, sys_sysctl, sys_getsid, sys_fdatasync, sys_nfsservctl .word sys_sync_file_range, sys_clock_settime, sys_clock_gettime, sys_clock_getres, sys_clock_nanosleep /*260*/ .word sys_sched_getaffinity, sys_sched_setaffinity, sys_timer_settime, sys_timer_gettime, sys_timer_getoverrun .word sys_timer_delete, sys_timer_create, sys_ni_syscall, sys_io_setup, sys_io_destroy diff --git a/arch/sparc/kernel/time_64.c b/arch/sparc/kernel/time_64.c index 2db3c2229b9..db310aa0018 100644 --- a/arch/sparc/kernel/time_64.c +++ b/arch/sparc/kernel/time_64.c @@ -729,7 +729,7 @@ void timer_interrupt(int irq, struct pt_regs *regs) irq_enter(); - kstat_this_cpu.irqs[0]++; + kstat_incr_irqs_this_cpu(0, irq_to_desc(0)); if (unlikely(!evt->event_handler)) { printk(KERN_WARNING diff --git a/arch/sparc/kernel/traps_64.c b/arch/sparc/kernel/traps_64.c index c2d153d4658..d809c4ebb48 100644 --- a/arch/sparc/kernel/traps_64.c +++ b/arch/sparc/kernel/traps_64.c @@ -1,6 +1,6 @@ /* arch/sparc64/kernel/traps.c * - * Copyright (C) 1995,1997,2008 David S. Miller (davem@davemloft.net) + * Copyright (C) 1995,1997,2008,2009 David S. Miller (davem@davemloft.net) * Copyright (C) 1997,1999,2000 Jakub Jelinek (jakub@redhat.com) */ @@ -314,6 +314,21 @@ void sun4v_data_access_exception(struct pt_regs *regs, unsigned long addr, unsig return; if (regs->tstate & TSTATE_PRIV) { + /* Test if this comes from uaccess places. */ + const struct exception_table_entry *entry; + + entry = search_exception_tables(regs->tpc); + if (entry) { + /* Ouch, somebody is trying VM hole tricks on us... */ +#ifdef DEBUG_EXCEPTIONS + printk("Exception: PC<%016lx> faddr<UNKNOWN>\n", regs->tpc); + printk("EX_TABLE: insn<%016lx> fixup<%016lx>\n", + regs->tpc, entry->fixup); +#endif + regs->tpc = entry->fixup; + regs->tnpc = regs->tpc + 4; + return; + } printk("sun4v_data_access_exception: ADDR[%016lx] " "CTX[%04x] TYPE[%04x], going.\n", addr, ctx, type); diff --git a/arch/sparc/lib/Makefile b/arch/sparc/lib/Makefile index 273fc85269f..e75faf0e59a 100644 --- a/arch/sparc/lib/Makefile +++ b/arch/sparc/lib/Makefile @@ -18,7 +18,7 @@ lib-$(CONFIG_SPARC32) += lshrdi3.o ashldi3.o lib-y += rwsem_$(BITS).o lib-$(CONFIG_SPARC32) += muldi3.o bitext.o cmpdi2.o -lib-$(CONFIG_SPARC64) += PeeCeeI.o copy_page.o clear_page.o bzero.o +lib-$(CONFIG_SPARC64) += copy_page.o clear_page.o bzero.o lib-$(CONFIG_SPARC64) += csum_copy.o csum_copy_from_user.o csum_copy_to_user.o lib-$(CONFIG_SPARC64) += VISsave.o lib-$(CONFIG_SPARC64) += bitops.o @@ -43,3 +43,4 @@ lib-$(CONFIG_SPARC64) += mcount.o ipcsum.o xor.o obj-y += iomap.o obj-$(CONFIG_SPARC32) += atomic32.o obj-y += ksyms.o +obj-$(CONFIG_SPARC64) += PeeCeeI.o diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 73f7fe8fd4d..d6218e6c982 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -133,7 +133,7 @@ config ARCH_HAS_CACHE_LINE_SIZE def_bool y config HAVE_SETUP_PER_CPU_AREA - def_bool X86_64_SMP || (X86_SMP && !X86_VOYAGER) + def_bool y config HAVE_CPUMASK_OF_CPU_MAP def_bool X86_64_SMP @@ -391,6 +391,13 @@ config X86_RDC321X as R-8610-(G). If you don't have one of these chips, you should say N here. +config X86_UV + bool "SGI Ultraviolet" + depends on X86_64 + help + This option is needed in order to support SGI Ultraviolet systems. + If you don't have one of these, you should say N here. + config SCHED_OMIT_FRAME_POINTER def_bool y prompt "Single-depth WCHAN output" @@ -1340,13 +1347,17 @@ config SECCOMP If unsure, say Y. Only embedded should say N here. +config CC_STACKPROTECTOR_ALL + bool + config CC_STACKPROTECTOR bool "Enable -fstack-protector buffer overflow detection (EXPERIMENTAL)" - depends on X86_64 && EXPERIMENTAL && BROKEN + depends on X86_64 + select CC_STACKPROTECTOR_ALL help - This option turns on the -fstack-protector GCC feature. This - feature puts, at the beginning of critical functions, a canary - value on the stack just before the return address, and validates + This option turns on the -fstack-protector GCC feature. This + feature puts, at the beginning of functions, a canary value on + the stack just before the return address, and validates the value just before actually returning. Stack based buffer overflows (that need to overwrite this return address) now also overwrite the canary, which gets detected and the attack is then @@ -1354,15 +1365,8 @@ config CC_STACKPROTECTOR This feature requires gcc version 4.2 or above, or a distribution gcc with the feature backported. Older versions are automatically - detected and for those versions, this configuration option is ignored. - -config CC_STACKPROTECTOR_ALL - bool "Use stack-protector for all functions" - depends on CC_STACKPROTECTOR - help - Normally, GCC only inserts the canary value protection for - functions that use large-ish on-stack buffers. By enabling - this option, GCC will be asked to do this for ALL functions. + detected and for those versions, this configuration option is + ignored. (and a warning is printed during bootup) source kernel/Kconfig.hz diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu index 8078955845a..8eb50ba9161 100644 --- a/arch/x86/Kconfig.cpu +++ b/arch/x86/Kconfig.cpu @@ -292,25 +292,23 @@ config X86_CPU # Define implied options from the CPU selection here config X86_L1_CACHE_BYTES int - default "128" if GENERIC_CPU || MPSC - default "64" if MK8 || MCORE2 - depends on X86_64 + default "128" if MPSC + default "64" if GENERIC_CPU || MK8 || MCORE2 || X86_32 config X86_INTERNODE_CACHE_BYTES int default "4096" if X86_VSMP default X86_L1_CACHE_BYTES if !X86_VSMP - depends on X86_64 config X86_CMPXCHG def_bool X86_64 || (X86_32 && !M386) config X86_L1_CACHE_SHIFT int - default "7" if MPENTIUM4 || X86_GENERIC || GENERIC_CPU || MPSC + default "7" if MPENTIUM4 || MPSC default "4" if X86_ELAN || M486 || M386 || MGEODEGX1 default "5" if MWINCHIP3D || MWINCHIPC6 || MCRUSOE || MEFFICEON || MCYRIXIII || MK6 || MPENTIUMIII || MPENTIUMII || M686 || M586MMX || M586TSC || M586 || MVIAC3_2 || MGEODE_LX - default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7 + default "6" if MK7 || MK8 || MPENTIUMM || MCORE2 || MVIAC7 || X86_GENERIC || GENERIC_CPU config X86_XADD def_bool y diff --git a/arch/x86/Kconfig.debug b/arch/x86/Kconfig.debug index 10d6cc3fd05..28f111461ca 100644 --- a/arch/x86/Kconfig.debug +++ b/arch/x86/Kconfig.debug @@ -117,6 +117,7 @@ config DEBUG_RODATA config DEBUG_RODATA_TEST bool "Testcase for the DEBUG_RODATA feature" depends on DEBUG_RODATA + default y help This option enables a testcase for the DEBUG_RODATA feature as well as for the change_page_attr() infrastructure. diff --git a/arch/x86/Makefile b/arch/x86/Makefile index d1a47adb5ae..cacee981d16 100644 --- a/arch/x86/Makefile +++ b/arch/x86/Makefile @@ -73,7 +73,7 @@ else stackp := $(CONFIG_SHELL) $(srctree)/scripts/gcc-x86_64-has-stack-protector.sh stackp-$(CONFIG_CC_STACKPROTECTOR) := $(shell $(stackp) \ - "$(CC)" -fstack-protector ) + "$(CC)" "-fstack-protector -DGCC_HAS_SP" ) stackp-$(CONFIG_CC_STACKPROTECTOR_ALL) += $(shell $(stackp) \ "$(CC)" -fstack-protector-all ) diff --git a/arch/x86/boot/video-vesa.c b/arch/x86/boot/video-vesa.c index 75115849af3..4a58c8ce3f6 100644 --- a/arch/x86/boot/video-vesa.c +++ b/arch/x86/boot/video-vesa.c @@ -269,9 +269,8 @@ void vesa_store_edid(void) we genuinely have to assume all registers are destroyed here. */ asm("pushw %%es; movw %2,%%es; "INT10"; popw %%es" - : "+a" (ax), "+b" (bx) - : "c" (cx), "D" (di) - : "esi"); + : "+a" (ax), "+b" (bx), "+c" (cx), "+D" (di) + : : "esi", "edx"); if (ax != 0x004f) return; /* No EDID */ @@ -285,9 +284,9 @@ void vesa_store_edid(void) dx = 0; /* EDID block number */ di =(size_t) &boot_params.edid_info; /* (ES:)Pointer to block */ asm(INT10 - : "+a" (ax), "+b" (bx), "+d" (dx), "=m" (boot_params.edid_info) - : "c" (cx), "D" (di) - : "esi"); + : "+a" (ax), "+b" (bx), "+d" (dx), "=m" (boot_params.edid_info), + "+c" (cx), "+D" (di) + : : "esi"); #endif /* CONFIG_FIRMWARE_EDID */ } diff --git a/arch/x86/configs/i386_defconfig b/arch/x86/configs/i386_defconfig index b30a08ed8eb..edba00d98ac 100644 --- a/arch/x86/configs/i386_defconfig +++ b/arch/x86/configs/i386_defconfig @@ -1331,8 +1331,8 @@ CONFIG_I2C_I801=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/x86/configs/x86_64_defconfig b/arch/x86/configs/x86_64_defconfig index 0e7dbc0a3e4..322dd2748fc 100644 --- a/arch/x86/configs/x86_64_defconfig +++ b/arch/x86/configs/x86_64_defconfig @@ -1311,8 +1311,8 @@ CONFIG_I2C_I801=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_AT24 is not set -# CONFIG_SENSORS_EEPROM is not set +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set diff --git a/arch/x86/ia32/ia32_signal.c b/arch/x86/ia32/ia32_signal.c index 9dabd00e980..dd77ac0cac4 100644 --- a/arch/x86/ia32/ia32_signal.c +++ b/arch/x86/ia32/ia32_signal.c @@ -46,78 +46,83 @@ void signal_fault(struct pt_regs *regs, void __user *frame, char *where); int copy_siginfo_to_user32(compat_siginfo_t __user *to, siginfo_t *from) { - int err; + int err = 0; if (!access_ok(VERIFY_WRITE, to, sizeof(compat_siginfo_t))) return -EFAULT; - /* If you change siginfo_t structure, please make sure that - this code is fixed accordingly. - It should never copy any pad contained in the structure - to avoid security leaks, but must copy the generic - 3 ints plus the relevant union member. */ - err = __put_user(from->si_signo, &to->si_signo); - err |= __put_user(from->si_errno, &to->si_errno); - err |= __put_user((short)from->si_code, &to->si_code); - - if (from->si_code < 0) { - err |= __put_user(from->si_pid, &to->si_pid); - err |= __put_user(from->si_uid, &to->si_uid); - err |= __put_user(ptr_to_compat(from->si_ptr), &to->si_ptr); - } else { - /* - * First 32bits of unions are always present: - * si_pid === si_band === si_tid === si_addr(LS half) - */ - err |= __put_user(from->_sifields._pad[0], - &to->_sifields._pad[0]); - switch (from->si_code >> 16) { - case __SI_FAULT >> 16: - break; - case __SI_CHLD >> 16: - err |= __put_user(from->si_utime, &to->si_utime); - err |= __put_user(from->si_stime, &to->si_stime); - err |= __put_user(from->si_status, &to->si_status); - /* FALL THROUGH */ - default: - case __SI_KILL >> 16: - err |= __put_user(from->si_uid, &to->si_uid); - break; - case __SI_POLL >> 16: - err |= __put_user(from->si_fd, &to->si_fd); - break; - case __SI_TIMER >> 16: - err |= __put_user(from->si_overrun, &to->si_overrun); - err |= __put_user(ptr_to_compat(from->si_ptr), - &to->si_ptr); - break; - /* This is not generated by the kernel as of now. */ - case __SI_RT >> 16: - case __SI_MESGQ >> 16: - err |= __put_user(from->si_uid, &to->si_uid); - err |= __put_user(from->si_int, &to->si_int); - break; + put_user_try { + /* If you change siginfo_t structure, please make sure that + this code is fixed accordingly. + It should never copy any pad contained in the structure + to avoid security leaks, but must copy the generic + 3 ints plus the relevant union member. */ + put_user_ex(from->si_signo, &to->si_signo); + put_user_ex(from->si_errno, &to->si_errno); + put_user_ex((short)from->si_code, &to->si_code); + + if (from->si_code < 0) { + put_user_ex(from->si_pid, &to->si_pid); + put_user_ex(from->si_uid, &to->si_uid); + put_user_ex(ptr_to_compat(from->si_ptr), &to->si_ptr); + } else { + /* + * First 32bits of unions are always present: + * si_pid === si_band === si_tid === si_addr(LS half) + */ + put_user_ex(from->_sifields._pad[0], + &to->_sifields._pad[0]); + switch (from->si_code >> 16) { + case __SI_FAULT >> 16: + break; + case __SI_CHLD >> 16: + put_user_ex(from->si_utime, &to->si_utime); + put_user_ex(from->si_stime, &to->si_stime); + put_user_ex(from->si_status, &to->si_status); + /* FALL THROUGH */ + default: + case __SI_KILL >> 16: + put_user_ex(from->si_uid, &to->si_uid); + break; + case __SI_POLL >> 16: + put_user_ex(from->si_fd, &to->si_fd); + break; + case __SI_TIMER >> 16: + put_user_ex(from->si_overrun, &to->si_overrun); + put_user_ex(ptr_to_compat(from->si_ptr), + &to->si_ptr); + break; + /* This is not generated by the kernel as of now. */ + case __SI_RT >> 16: + case __SI_MESGQ >> 16: + put_user_ex(from->si_uid, &to->si_uid); + put_user_ex(from->si_int, &to->si_int); + break; + } } - } + } put_user_catch(err); + return err; } int copy_siginfo_from_user32(siginfo_t *to, compat_siginfo_t __user *from) { - int err; + int err = 0; u32 ptr32; if (!access_ok(VERIFY_READ, from, sizeof(compat_siginfo_t))) return -EFAULT; - err = __get_user(to->si_signo, &from->si_signo); - err |= __get_user(to->si_errno, &from->si_errno); - err |= __get_user(to->si_code, &from->si_code); + get_user_try { + get_user_ex(to->si_signo, &from->si_signo); + get_user_ex(to->si_errno, &from->si_errno); + get_user_ex(to->si_code, &from->si_code); - err |= __get_user(to->si_pid, &from->si_pid); - err |= __get_user(to->si_uid, &from->si_uid); - err |= __get_user(ptr32, &from->si_ptr); - to->si_ptr = compat_ptr(ptr32); + get_user_ex(to->si_pid, &from->si_pid); + get_user_ex(to->si_uid, &from->si_uid); + get_user_ex(ptr32, &from->si_ptr); + to->si_ptr = compat_ptr(ptr32); + } get_user_catch(err); return err; } @@ -142,17 +147,23 @@ asmlinkage long sys32_sigaltstack(const stack_ia32_t __user *uss_ptr, struct pt_regs *regs) { stack_t uss, uoss; - int ret; + int ret, err = 0; mm_segment_t seg; if (uss_ptr) { u32 ptr; memset(&uss, 0, sizeof(stack_t)); - if (!access_ok(VERIFY_READ, uss_ptr, sizeof(stack_ia32_t)) || - __get_user(ptr, &uss_ptr->ss_sp) || - __get_user(uss.ss_flags, &uss_ptr->ss_flags) || - __get_user(uss.ss_size, &uss_ptr->ss_size)) + if (!access_ok(VERIFY_READ, uss_ptr, sizeof(stack_ia32_t))) + return -EFAULT; + + get_user_try { + get_user_ex(ptr, &uss_ptr->ss_sp); + get_user_ex(uss.ss_flags, &uss_ptr->ss_flags); + get_user_ex(uss.ss_size, &uss_ptr->ss_size); + } get_user_catch(err); + + if (err) return -EFAULT; uss.ss_sp = compat_ptr(ptr); } @@ -161,10 +172,16 @@ asmlinkage long sys32_sigaltstack(const stack_ia32_t __user *uss_ptr, ret = do_sigaltstack(uss_ptr ? &uss : NULL, &uoss, regs->sp); set_fs(seg); if (ret >= 0 && uoss_ptr) { - if (!access_ok(VERIFY_WRITE, uoss_ptr, sizeof(stack_ia32_t)) || - __put_user(ptr_to_compat(uoss.ss_sp), &uoss_ptr->ss_sp) || - __put_user(uoss.ss_flags, &uoss_ptr->ss_flags) || - __put_user(uoss.ss_size, &uoss_ptr->ss_size)) + if (!access_ok(VERIFY_WRITE, uoss_ptr, sizeof(stack_ia32_t))) + return -EFAULT; + + put_user_try { + put_user_ex(ptr_to_compat(uoss.ss_sp), &uoss_ptr->ss_sp); + put_user_ex(uoss.ss_flags, &uoss_ptr->ss_flags); + put_user_ex(uoss.ss_size, &uoss_ptr->ss_size); + } put_user_catch(err); + + if (err) ret = -EFAULT; } return ret; @@ -174,18 +191,18 @@ asmlinkage long sys32_sigaltstack(const stack_ia32_t __user *uss_ptr, * Do a signal return; undo the signal stack. */ #define COPY(x) { \ - err |= __get_user(regs->x, &sc->x); \ + get_user_ex(regs->x, &sc->x); \ } #define COPY_SEG_CPL3(seg) { \ unsigned short tmp; \ - err |= __get_user(tmp, &sc->seg); \ + get_user_ex(tmp, &sc->seg); \ regs->seg = tmp | 3; \ } #define RELOAD_SEG(seg) { \ unsigned int cur, pre; \ - err |= __get_user(pre, &sc->seg); \ + get_user_ex(pre, &sc->seg); \ savesegment(seg, cur); \ pre |= 3; \ if (pre != cur) \ @@ -209,39 +226,42 @@ static int ia32_restore_sigcontext(struct pt_regs *regs, sc, sc->err, sc->ip, sc->cs, sc->flags); #endif - /* - * Reload fs and gs if they have changed in the signal - * handler. This does not handle long fs/gs base changes in - * the handler, but does not clobber them at least in the - * normal case. - */ - err |= __get_user(gs, &sc->gs); - gs |= 3; - savesegment(gs, oldgs); - if (gs != oldgs) - load_gs_index(gs); - - RELOAD_SEG(fs); - RELOAD_SEG(ds); - RELOAD_SEG(es); - - COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx); - COPY(dx); COPY(cx); COPY(ip); - /* Don't touch extended registers */ - - COPY_SEG_CPL3(cs); - COPY_SEG_CPL3(ss); - - err |= __get_user(tmpflags, &sc->flags); - regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS); - /* disable syscall checks */ - regs->orig_ax = -1; - - err |= __get_user(tmp, &sc->fpstate); - buf = compat_ptr(tmp); - err |= restore_i387_xstate_ia32(buf); - - err |= __get_user(*pax, &sc->ax); + get_user_try { + /* + * Reload fs and gs if they have changed in the signal + * handler. This does not handle long fs/gs base changes in + * the handler, but does not clobber them at least in the + * normal case. + */ + get_user_ex(gs, &sc->gs); + gs |= 3; + savesegment(gs, oldgs); + if (gs != oldgs) + load_gs_index(gs); + + RELOAD_SEG(fs); + RELOAD_SEG(ds); + RELOAD_SEG(es); + + COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx); + COPY(dx); COPY(cx); COPY(ip); + /* Don't touch extended registers */ + + COPY_SEG_CPL3(cs); + COPY_SEG_CPL3(ss); + + get_user_ex(tmpflags, &sc->flags); + regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS); + /* disable syscall checks */ + regs->orig_ax = -1; + + get_user_ex(tmp, &sc->fpstate); + buf = compat_ptr(tmp); + err |= restore_i387_xstate_ia32(buf); + + get_user_ex(*pax, &sc->ax); + } get_user_catch(err); + return err; } @@ -319,36 +339,38 @@ static int ia32_setup_sigcontext(struct sigcontext_ia32 __user *sc, { int tmp, err = 0; - savesegment(gs, tmp); - err |= __put_user(tmp, (unsigned int __user *)&sc->gs); - savesegment(fs, tmp); - err |= __put_user(tmp, (unsigned int __user *)&sc->fs); - savesegment(ds, tmp); - err |= __put_user(tmp, (unsigned int __user *)&sc->ds); - savesegment(es, tmp); - err |= __put_user(tmp, (unsigned int __user *)&sc->es); - - err |= __put_user(regs->di, &sc->di); - err |= __put_user(regs->si, &sc->si); - err |= __put_user(regs->bp, &sc->bp); - err |= __put_user(regs->sp, &sc->sp); - err |= __put_user(regs->bx, &sc->bx); - err |= __put_user(regs->dx, &sc->dx); - err |= __put_user(regs->cx, &sc->cx); - err |= __put_user(regs->ax, &sc->ax); - err |= __put_user(current->thread.trap_no, &sc->trapno); - err |= __put_user(current->thread.error_code, &sc->err); - err |= __put_user(regs->ip, &sc->ip); - err |= __put_user(regs->cs, (unsigned int __user *)&sc->cs); - err |= __put_user(regs->flags, &sc->flags); - err |= __put_user(regs->sp, &sc->sp_at_signal); - err |= __put_user(regs->ss, (unsigned int __user *)&sc->ss); - - err |= __put_user(ptr_to_compat(fpstate), &sc->fpstate); - - /* non-iBCS2 extensions.. */ - err |= __put_user(mask, &sc->oldmask); - err |= __put_user(current->thread.cr2, &sc->cr2); + put_user_try { + savesegment(gs, tmp); + put_user_ex(tmp, (unsigned int __user *)&sc->gs); + savesegment(fs, tmp); + put_user_ex(tmp, (unsigned int __user *)&sc->fs); + savesegment(ds, tmp); + put_user_ex(tmp, (unsigned int __user *)&sc->ds); + savesegment(es, tmp); + put_user_ex(tmp, (unsigned int __user *)&sc->es); + + put_user_ex(regs->di, &sc->di); + put_user_ex(regs->si, &sc->si); + put_user_ex(regs->bp, &sc->bp); + put_user_ex(regs->sp, &sc->sp); + put_user_ex(regs->bx, &sc->bx); + put_user_ex(regs->dx, &sc->dx); + put_user_ex(regs->cx, &sc->cx); + put_user_ex(regs->ax, &sc->ax); + put_user_ex(current->thread.trap_no, &sc->trapno); + put_user_ex(current->thread.error_code, &sc->err); + put_user_ex(regs->ip, &sc->ip); + put_user_ex(regs->cs, (unsigned int __user *)&sc->cs); + put_user_ex(regs->flags, &sc->flags); + put_user_ex(regs->sp, &sc->sp_at_signal); + put_user_ex(regs->ss, (unsigned int __user *)&sc->ss); + + put_user_ex(ptr_to_compat(fpstate), &sc->fpstate); + + /* non-iBCS2 extensions.. */ + put_user_ex(mask, &sc->oldmask); + put_user_ex(current->thread.cr2, &sc->cr2); + } put_user_catch(err); return err; } @@ -437,13 +459,17 @@ int ia32_setup_frame(int sig, struct k_sigaction *ka, else restorer = &frame->retcode; } - err |= __put_user(ptr_to_compat(restorer), &frame->pretcode); - /* - * These are actually not used anymore, but left because some - * gdb versions depend on them as a marker. - */ - err |= __put_user(*((u64 *)&code), (u64 *)frame->retcode); + put_user_try { + put_user_ex(ptr_to_compat(restorer), &frame->pretcode); + + /* + * These are actually not used anymore, but left because some + * gdb versions depend on them as a marker. + */ + put_user_ex(*((u64 *)&code), (u64 *)frame->retcode); + } put_user_catch(err); + if (err) return -EFAULT; @@ -496,41 +522,40 @@ int ia32_setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) return -EFAULT; - err |= __put_user(sig, &frame->sig); - err |= __put_user(ptr_to_compat(&frame->info), &frame->pinfo); - err |= __put_user(ptr_to_compat(&frame->uc), &frame->puc); - err |= copy_siginfo_to_user32(&frame->info, info); - if (err) - return -EFAULT; + put_user_try { + put_user_ex(sig, &frame->sig); + put_user_ex(ptr_to_compat(&frame->info), &frame->pinfo); + put_user_ex(ptr_to_compat(&frame->uc), &frame->puc); + err |= copy_siginfo_to_user32(&frame->info, info); - /* Create the ucontext. */ - if (cpu_has_xsave) - err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags); - else - err |= __put_user(0, &frame->uc.uc_flags); - err |= __put_user(0, &frame->uc.uc_link); - err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); - err |= __put_user(sas_ss_flags(regs->sp), - &frame->uc.uc_stack.ss_flags); - err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); - err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, fpstate, - regs, set->sig[0]); - err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); - if (err) - return -EFAULT; + /* Create the ucontext. */ + if (cpu_has_xsave) + put_user_ex(UC_FP_XSTATE, &frame->uc.uc_flags); + else + put_user_ex(0, &frame->uc.uc_flags); + put_user_ex(0, &frame->uc.uc_link); + put_user_ex(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); + put_user_ex(sas_ss_flags(regs->sp), + &frame->uc.uc_stack.ss_flags); + put_user_ex(current->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= ia32_setup_sigcontext(&frame->uc.uc_mcontext, fpstate, + regs, set->sig[0]); + err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); + + if (ka->sa.sa_flags & SA_RESTORER) + restorer = ka->sa.sa_restorer; + else + restorer = VDSO32_SYMBOL(current->mm->context.vdso, + rt_sigreturn); + put_user_ex(ptr_to_compat(restorer), &frame->pretcode); + + /* + * Not actually used anymore, but left because some gdb + * versions need it. + */ + put_user_ex(*((u64 *)&code), (u64 *)frame->retcode); + } put_user_catch(err); - if (ka->sa.sa_flags & SA_RESTORER) - restorer = ka->sa.sa_restorer; - else - restorer = VDSO32_SYMBOL(current->mm->context.vdso, - rt_sigreturn); - err |= __put_user(ptr_to_compat(restorer), &frame->pretcode); - - /* - * Not actually used anymore, but left because some gdb - * versions need it. - */ - err |= __put_user(*((u64 *)&code), (u64 *)frame->retcode); if (err) return -EFAULT; diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S index 256b00b6189..9c79b247700 100644 --- a/arch/x86/ia32/ia32entry.S +++ b/arch/x86/ia32/ia32entry.S @@ -112,8 +112,8 @@ ENTRY(ia32_sysenter_target) CFI_DEF_CFA rsp,0 CFI_REGISTER rsp,rbp SWAPGS_UNSAFE_STACK - movq %gs:pda_kernelstack, %rsp - addq $(PDA_STACKOFFSET),%rsp + movq PER_CPU_VAR(kernel_stack), %rsp + addq $(KERNEL_STACK_OFFSET),%rsp /* * No need to follow this irqs on/off section: the syscall * disabled irqs, here we enable it straight after entry: @@ -273,13 +273,13 @@ ENDPROC(ia32_sysenter_target) ENTRY(ia32_cstar_target) CFI_STARTPROC32 simple CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,PDA_STACKOFFSET + CFI_DEF_CFA rsp,KERNEL_STACK_OFFSET CFI_REGISTER rip,rcx /*CFI_REGISTER rflags,r11*/ SWAPGS_UNSAFE_STACK movl %esp,%r8d CFI_REGISTER rsp,r8 - movq %gs:pda_kernelstack,%rsp + movq PER_CPU_VAR(kernel_stack),%rsp /* * No need to follow this irqs on/off section: the syscall * disabled irqs and here we enable it straight after entry: diff --git a/arch/x86/include/asm/apicnum.h b/arch/x86/include/asm/apicnum.h new file mode 100644 index 00000000000..82f613c607c --- /dev/null +++ b/arch/x86/include/asm/apicnum.h @@ -0,0 +1,12 @@ +#ifndef _ASM_X86_APICNUM_H +#define _ASM_X86_APICNUM_H + +/* define MAX_IO_APICS */ +#ifdef CONFIG_X86_32 +# define MAX_IO_APICS 64 +#else +# define MAX_IO_APICS 128 +# define MAX_LOCAL_APIC 32768 +#endif + +#endif /* _ASM_X86_APICNUM_H */ diff --git a/arch/x86/include/asm/bitops.h b/arch/x86/include/asm/bitops.h index e02a359d2aa..02b47a603fc 100644 --- a/arch/x86/include/asm/bitops.h +++ b/arch/x86/include/asm/bitops.h @@ -3,6 +3,9 @@ /* * Copyright 1992, Linus Torvalds. + * + * Note: inlines with more than a single statement should be marked + * __always_inline to avoid problems with older gcc's inlining heuristics. */ #ifndef _LINUX_BITOPS_H @@ -53,7 +56,8 @@ * Note that @nr may be almost arbitrarily large; this function is not * restricted to acting on a single-word quantity. */ -static inline void set_bit(unsigned int nr, volatile unsigned long *addr) +static __always_inline void +set_bit(unsigned int nr, volatile unsigned long *addr) { if (IS_IMMEDIATE(nr)) { asm volatile(LOCK_PREFIX "orb %1,%0" @@ -90,7 +94,8 @@ static inline void __set_bit(int nr, volatile unsigned long *addr) * you should call smp_mb__before_clear_bit() and/or smp_mb__after_clear_bit() * in order to ensure changes are visible on other processors. */ -static inline void clear_bit(int nr, volatile unsigned long *addr) +static __always_inline void +clear_bit(int nr, volatile unsigned long *addr) { if (IS_IMMEDIATE(nr)) { asm volatile(LOCK_PREFIX "andb %1,%0" @@ -204,7 +209,8 @@ static inline int test_and_set_bit(int nr, volatile unsigned long *addr) * * This is the same as test_and_set_bit on x86. */ -static inline int test_and_set_bit_lock(int nr, volatile unsigned long *addr) +static __always_inline int +test_and_set_bit_lock(int nr, volatile unsigned long *addr) { return test_and_set_bit(nr, addr); } @@ -300,7 +306,7 @@ static inline int test_and_change_bit(int nr, volatile unsigned long *addr) return oldbit; } -static inline int constant_test_bit(unsigned int nr, const volatile unsigned long *addr) +static __always_inline int constant_test_bit(unsigned int nr, const volatile unsigned long *addr) { return ((1UL << (nr % BITS_PER_LONG)) & (((unsigned long *)addr)[nr / BITS_PER_LONG])) != 0; diff --git a/arch/x86/include/asm/cpu.h b/arch/x86/include/asm/cpu.h index bae482df603..f03b23e3286 100644 --- a/arch/x86/include/asm/cpu.h +++ b/arch/x86/include/asm/cpu.h @@ -7,6 +7,20 @@ #include <linux/nodemask.h> #include <linux/percpu.h> +#ifdef CONFIG_SMP + +extern void prefill_possible_map(void); + +#else /* CONFIG_SMP */ + +static inline void prefill_possible_map(void) {} + +#define cpu_physical_id(cpu) boot_cpu_physical_apicid +#define safe_smp_processor_id() 0 +#define stack_smp_processor_id() 0 + +#endif /* CONFIG_SMP */ + struct x86_cpu { struct cpu cpu; }; @@ -17,4 +31,11 @@ extern void arch_unregister_cpu(int); #endif DECLARE_PER_CPU(int, cpu_state); + +#ifdef CONFIG_X86_HAS_BOOT_CPU_ID +extern unsigned char boot_cpu_id; +#else +#define boot_cpu_id 0 +#endif + #endif /* _ASM_X86_CPU_H */ diff --git a/arch/x86/include/asm/cpumask.h b/arch/x86/include/asm/cpumask.h new file mode 100644 index 00000000000..a7f3c75f8ad --- /dev/null +++ b/arch/x86/include/asm/cpumask.h @@ -0,0 +1,32 @@ +#ifndef _ASM_X86_CPUMASK_H +#define _ASM_X86_CPUMASK_H +#ifndef __ASSEMBLY__ +#include <linux/cpumask.h> + +#ifdef CONFIG_X86_64 + +extern cpumask_var_t cpu_callin_mask; +extern cpumask_var_t cpu_callout_mask; +extern cpumask_var_t cpu_initialized_mask; +extern cpumask_var_t cpu_sibling_setup_mask; + +extern void setup_cpu_local_masks(void); + +#else /* CONFIG_X86_32 */ + +extern cpumask_t cpu_callin_map; +extern cpumask_t cpu_callout_map; +extern cpumask_t cpu_initialized; +extern cpumask_t cpu_sibling_setup_map; + +#define cpu_callin_mask ((struct cpumask *)&cpu_callin_map) +#define cpu_callout_mask ((struct cpumask *)&cpu_callout_map) +#define cpu_initialized_mask ((struct cpumask *)&cpu_initialized) +#define cpu_sibling_setup_mask ((struct cpumask *)&cpu_sibling_setup_map) + +static inline void setup_cpu_local_masks(void) { } + +#endif /* CONFIG_X86_32 */ + +#endif /* __ASSEMBLY__ */ +#endif /* _ASM_X86_CPUMASK_H */ diff --git a/arch/x86/include/asm/current.h b/arch/x86/include/asm/current.h index 0930b4f8d67..c68c361697e 100644 --- a/arch/x86/include/asm/current.h +++ b/arch/x86/include/asm/current.h @@ -1,39 +1,21 @@ #ifndef _ASM_X86_CURRENT_H #define _ASM_X86_CURRENT_H -#ifdef CONFIG_X86_32 #include <linux/compiler.h> #include <asm/percpu.h> +#ifndef __ASSEMBLY__ struct task_struct; DECLARE_PER_CPU(struct task_struct *, current_task); -static __always_inline struct task_struct *get_current(void) -{ - return x86_read_percpu(current_task); -} - -#else /* X86_32 */ - -#ifndef __ASSEMBLY__ -#include <asm/pda.h> - -struct task_struct; static __always_inline struct task_struct *get_current(void) { - return read_pda(pcurrent); + return percpu_read(current_task); } -#else /* __ASSEMBLY__ */ - -#include <asm/asm-offsets.h> -#define GET_CURRENT(reg) movq %gs:(pda_pcurrent),reg +#define current get_current() #endif /* __ASSEMBLY__ */ -#endif /* X86_32 */ - -#define current get_current() - #endif /* _ASM_X86_CURRENT_H */ diff --git a/arch/x86/include/asm/genapic_32.h b/arch/x86/include/asm/genapic_32.h index 2c05b737ee2..4334502d366 100644 --- a/arch/x86/include/asm/genapic_32.h +++ b/arch/x86/include/asm/genapic_32.h @@ -138,11 +138,4 @@ struct genapic { extern struct genapic *genapic; extern void es7000_update_genapic_to_cluster(void); -enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC}; -#define get_uv_system_type() UV_NONE -#define is_uv_system() 0 -#define uv_wakeup_secondary(a, b) 1 -#define uv_system_init() do {} while (0) - - #endif /* _ASM_X86_GENAPIC_32_H */ diff --git a/arch/x86/include/asm/genapic_64.h b/arch/x86/include/asm/genapic_64.h index adf32fb56aa..7bb092c5905 100644 --- a/arch/x86/include/asm/genapic_64.h +++ b/arch/x86/include/asm/genapic_64.h @@ -51,15 +51,9 @@ extern struct genapic apic_x2apic_phys; extern int acpi_madt_oem_check(char *, char *); extern void apic_send_IPI_self(int vector); -enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC}; -extern enum uv_system_type get_uv_system_type(void); -extern int is_uv_system(void); extern struct genapic apic_x2apic_uv_x; DECLARE_PER_CPU(int, x2apic_extra_bits); -extern void uv_cpu_init(void); -extern void uv_system_init(void); -extern int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip); extern void setup_apic_routing(void); diff --git a/arch/x86/include/asm/hardirq.h b/arch/x86/include/asm/hardirq.h index 000787df66e..176f058e715 100644 --- a/arch/x86/include/asm/hardirq.h +++ b/arch/x86/include/asm/hardirq.h @@ -1,11 +1,52 @@ -#ifdef CONFIG_X86_32 -# include "hardirq_32.h" -#else -# include "hardirq_64.h" +#ifndef _ASM_X86_HARDIRQ_H +#define _ASM_X86_HARDIRQ_H + +#include <linux/threads.h> +#include <linux/irq.h> + +typedef struct { + unsigned int __softirq_pending; + unsigned int __nmi_count; /* arch dependent */ + unsigned int irq0_irqs; +#ifdef CONFIG_X86_LOCAL_APIC + unsigned int apic_timer_irqs; /* arch dependent */ + unsigned int irq_spurious_count; +#endif +#ifdef CONFIG_SMP + unsigned int irq_resched_count; + unsigned int irq_call_count; + unsigned int irq_tlb_count; +#endif +#ifdef CONFIG_X86_MCE + unsigned int irq_thermal_count; +# ifdef CONFIG_X86_64 + unsigned int irq_threshold_count; +# endif #endif +} ____cacheline_aligned irq_cpustat_t; + +DECLARE_PER_CPU(irq_cpustat_t, irq_stat); + +/* We can have at most NR_VECTORS irqs routed to a cpu at a time */ +#define MAX_HARDIRQS_PER_CPU NR_VECTORS + +#define __ARCH_IRQ_STAT + +#define inc_irq_stat(member) percpu_add(irq_stat.member, 1) + +#define local_softirq_pending() percpu_read(irq_stat.__softirq_pending) + +#define __ARCH_SET_SOFTIRQ_PENDING + +#define set_softirq_pending(x) percpu_write(irq_stat.__softirq_pending, (x)) +#define or_softirq_pending(x) percpu_or(irq_stat.__softirq_pending, (x)) + +extern void ack_bad_irq(unsigned int irq); extern u64 arch_irq_stat_cpu(unsigned int cpu); #define arch_irq_stat_cpu arch_irq_stat_cpu extern u64 arch_irq_stat(void); #define arch_irq_stat arch_irq_stat + +#endif /* _ASM_X86_HARDIRQ_H */ diff --git a/arch/x86/include/asm/hardirq_32.h b/arch/x86/include/asm/hardirq_32.h deleted file mode 100644 index cf7954d1405..00000000000 --- a/arch/x86/include/asm/hardirq_32.h +++ /dev/null @@ -1,30 +0,0 @@ -#ifndef _ASM_X86_HARDIRQ_32_H -#define _ASM_X86_HARDIRQ_32_H - -#include <linux/threads.h> -#include <linux/irq.h> - -typedef struct { - unsigned int __softirq_pending; - unsigned long idle_timestamp; - unsigned int __nmi_count; /* arch dependent */ - unsigned int apic_timer_irqs; /* arch dependent */ - unsigned int irq0_irqs; - unsigned int irq_resched_count; - unsigned int irq_call_count; - unsigned int irq_tlb_count; - unsigned int irq_thermal_count; - unsigned int irq_spurious_count; -} ____cacheline_aligned irq_cpustat_t; - -DECLARE_PER_CPU(irq_cpustat_t, irq_stat); - -#define __ARCH_IRQ_STAT -#define __IRQ_STAT(cpu, member) (per_cpu(irq_stat, cpu).member) - -#define inc_irq_stat(member) (__get_cpu_var(irq_stat).member++) - -void ack_bad_irq(unsigned int irq); -#include <linux/irq_cpustat.h> - -#endif /* _ASM_X86_HARDIRQ_32_H */ diff --git a/arch/x86/include/asm/hardirq_64.h b/arch/x86/include/asm/hardirq_64.h deleted file mode 100644 index b5a6b5d5670..00000000000 --- a/arch/x86/include/asm/hardirq_64.h +++ /dev/null @@ -1,25 +0,0 @@ -#ifndef _ASM_X86_HARDIRQ_64_H -#define _ASM_X86_HARDIRQ_64_H - -#include <linux/threads.h> -#include <linux/irq.h> -#include <asm/pda.h> -#include <asm/apic.h> - -/* We can have at most NR_VECTORS irqs routed to a cpu at a time */ -#define MAX_HARDIRQS_PER_CPU NR_VECTORS - -#define __ARCH_IRQ_STAT 1 - -#define inc_irq_stat(member) add_pda(member, 1) - -#define local_softirq_pending() read_pda(__softirq_pending) - -#define __ARCH_SET_SOFTIRQ_PENDING 1 - -#define set_softirq_pending(x) write_pda(__softirq_pending, (x)) -#define or_softirq_pending(x) or_pda(__softirq_pending, (x)) - -extern void ack_bad_irq(unsigned int irq); - -#endif /* _ASM_X86_HARDIRQ_64_H */ diff --git a/arch/x86/include/asm/io.h b/arch/x86/include/asm/io.h index bdbb4b96160..bcf7ea4e136 100644 --- a/arch/x86/include/asm/io.h +++ b/arch/x86/include/asm/io.h @@ -99,7 +99,6 @@ extern void __iomem *ioremap_wc(resource_size_t offset, unsigned long size); * A boot-time mapping is currently limited to at most 16 pages. */ extern void early_ioremap_init(void); -extern void early_ioremap_clear(void); extern void early_ioremap_reset(void); extern void __iomem *early_ioremap(unsigned long offset, unsigned long size); extern void __iomem *early_memremap(unsigned long offset, unsigned long size); diff --git a/arch/x86/include/asm/io_apic.h b/arch/x86/include/asm/io_apic.h index 7a1f44ac1f1..08ec793aa04 100644 --- a/arch/x86/include/asm/io_apic.h +++ b/arch/x86/include/asm/io_apic.h @@ -114,38 +114,16 @@ struct IR_IO_APIC_route_entry { extern int nr_ioapics; extern int nr_ioapic_registers[MAX_IO_APICS]; -/* - * MP-BIOS irq configuration table structures: - */ - #define MP_MAX_IOAPIC_PIN 127 -struct mp_config_ioapic { - unsigned long mp_apicaddr; - unsigned int mp_apicid; - unsigned char mp_type; - unsigned char mp_apicver; - unsigned char mp_flags; -}; - -struct mp_config_intsrc { - unsigned int mp_dstapic; - unsigned char mp_type; - unsigned char mp_irqtype; - unsigned short mp_irqflag; - unsigned char mp_srcbus; - unsigned char mp_srcbusirq; - unsigned char mp_dstirq; -}; - /* I/O APIC entries */ -extern struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; +extern struct mpc_ioapic mp_ioapics[MAX_IO_APICS]; /* # of MP IRQ source entries */ extern int mp_irq_entries; /* MP IRQ source entries */ -extern struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; +extern struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* non-0 if default (table-less) MP configuration */ extern int mpc_default_type; diff --git a/arch/x86/include/asm/irq_regs.h b/arch/x86/include/asm/irq_regs.h index 89c898ab298..77843225b7e 100644 --- a/arch/x86/include/asm/irq_regs.h +++ b/arch/x86/include/asm/irq_regs.h @@ -1,5 +1,31 @@ -#ifdef CONFIG_X86_32 -# include "irq_regs_32.h" -#else -# include "irq_regs_64.h" -#endif +/* + * Per-cpu current frame pointer - the location of the last exception frame on + * the stack, stored in the per-cpu area. + * + * Jeremy Fitzhardinge <jeremy@goop.org> + */ +#ifndef _ASM_X86_IRQ_REGS_H +#define _ASM_X86_IRQ_REGS_H + +#include <asm/percpu.h> + +#define ARCH_HAS_OWN_IRQ_REGS + +DECLARE_PER_CPU(struct pt_regs *, irq_regs); + +static inline struct pt_regs *get_irq_regs(void) +{ + return percpu_read(irq_regs); +} + +static inline struct pt_regs *set_irq_regs(struct pt_regs *new_regs) +{ + struct pt_regs *old_regs; + + old_regs = get_irq_regs(); + percpu_write(irq_regs, new_regs); + + return old_regs; +} + +#endif /* _ASM_X86_IRQ_REGS_32_H */ diff --git a/arch/x86/include/asm/irq_regs_32.h b/arch/x86/include/asm/irq_regs_32.h deleted file mode 100644 index 86afd747345..00000000000 --- a/arch/x86/include/asm/irq_regs_32.h +++ /dev/null @@ -1,31 +0,0 @@ -/* - * Per-cpu current frame pointer - the location of the last exception frame on - * the stack, stored in the per-cpu area. - * - * Jeremy Fitzhardinge <jeremy@goop.org> - */ -#ifndef _ASM_X86_IRQ_REGS_32_H -#define _ASM_X86_IRQ_REGS_32_H - -#include <asm/percpu.h> - -#define ARCH_HAS_OWN_IRQ_REGS - -DECLARE_PER_CPU(struct pt_regs *, irq_regs); - -static inline struct pt_regs *get_irq_regs(void) -{ - return x86_read_percpu(irq_regs); -} - -static inline struct pt_regs *set_irq_regs(struct pt_regs *new_regs) -{ - struct pt_regs *old_regs; - - old_regs = get_irq_regs(); - x86_write_percpu(irq_regs, new_regs); - - return old_regs; -} - -#endif /* _ASM_X86_IRQ_REGS_32_H */ diff --git a/arch/x86/include/asm/irq_regs_64.h b/arch/x86/include/asm/irq_regs_64.h deleted file mode 100644 index 3dd9c0b7027..00000000000 --- a/arch/x86/include/asm/irq_regs_64.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/irq_regs.h> diff --git a/arch/x86/include/asm/irq_vectors.h b/arch/x86/include/asm/irq_vectors.h index f7ff65032b9..9a83a10a5d5 100644 --- a/arch/x86/include/asm/irq_vectors.h +++ b/arch/x86/include/asm/irq_vectors.h @@ -49,31 +49,33 @@ * some of the following vectors are 'rare', they are merged * into a single vector (CALL_FUNCTION_VECTOR) to save vector space. * TLB, reschedule and local APIC vectors are performance-critical. - * - * Vectors 0xf0-0xfa are free (reserved for future Linux use). */ #ifdef CONFIG_X86_32 # define SPURIOUS_APIC_VECTOR 0xff # define ERROR_APIC_VECTOR 0xfe -# define INVALIDATE_TLB_VECTOR 0xfd -# define RESCHEDULE_VECTOR 0xfc -# define CALL_FUNCTION_VECTOR 0xfb -# define CALL_FUNCTION_SINGLE_VECTOR 0xfa -# define THERMAL_APIC_VECTOR 0xf0 +# define RESCHEDULE_VECTOR 0xfd +# define CALL_FUNCTION_VECTOR 0xfc +# define CALL_FUNCTION_SINGLE_VECTOR 0xfb +# define THERMAL_APIC_VECTOR 0xfa +/* 0xf8 - 0xf9 : free */ +# define INVALIDATE_TLB_VECTOR_END 0xf7 +# define INVALIDATE_TLB_VECTOR_START 0xf0 /* f0-f7 used for TLB flush */ + +# define NUM_INVALIDATE_TLB_VECTORS 8 #else -#define SPURIOUS_APIC_VECTOR 0xff -#define ERROR_APIC_VECTOR 0xfe -#define RESCHEDULE_VECTOR 0xfd -#define CALL_FUNCTION_VECTOR 0xfc -#define CALL_FUNCTION_SINGLE_VECTOR 0xfb -#define THERMAL_APIC_VECTOR 0xfa -#define THRESHOLD_APIC_VECTOR 0xf9 -#define UV_BAU_MESSAGE 0xf8 -#define INVALIDATE_TLB_VECTOR_END 0xf7 -#define INVALIDATE_TLB_VECTOR_START 0xf0 /* f0-f7 used for TLB flush */ +# define SPURIOUS_APIC_VECTOR 0xff +# define ERROR_APIC_VECTOR 0xfe +# define RESCHEDULE_VECTOR 0xfd +# define CALL_FUNCTION_VECTOR 0xfc +# define CALL_FUNCTION_SINGLE_VECTOR 0xfb +# define THERMAL_APIC_VECTOR 0xfa +# define THRESHOLD_APIC_VECTOR 0xf9 +# define UV_BAU_MESSAGE 0xf8 +# define INVALIDATE_TLB_VECTOR_END 0xf7 +# define INVALIDATE_TLB_VECTOR_START 0xf0 /* f0-f7 used for TLB flush */ #define NUM_INVALIDATE_TLB_VECTORS 8 @@ -105,6 +107,8 @@ #if defined(CONFIG_X86_IO_APIC) && !defined(CONFIG_X86_VOYAGER) +#include <asm/apicnum.h> /* need MAX_IO_APICS */ + #ifndef CONFIG_SPARSE_IRQ # if NR_CPUS < MAX_IO_APICS # define NR_IRQS (NR_VECTORS + (32 * NR_CPUS)) @@ -112,11 +116,12 @@ # define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS)) # endif #else -# if (8 * NR_CPUS) > (32 * MAX_IO_APICS) -# define NR_IRQS (NR_VECTORS + (8 * NR_CPUS)) -# else -# define NR_IRQS (NR_VECTORS + (32 * MAX_IO_APICS)) -# endif + +# define NR_IRQS \ + ((8 * NR_CPUS) > (32 * MAX_IO_APICS) ? \ + (NR_VECTORS + (8 * NR_CPUS)) : \ + (NR_VECTORS + (32 * MAX_IO_APICS))) \ + #endif #elif defined(CONFIG_X86_VOYAGER) diff --git a/arch/x86/include/asm/mach-default/entry_arch.h b/arch/x86/include/asm/mach-default/entry_arch.h index 6b1add8e31d..6fa399ad1de 100644 --- a/arch/x86/include/asm/mach-default/entry_arch.h +++ b/arch/x86/include/asm/mach-default/entry_arch.h @@ -11,10 +11,26 @@ */ #ifdef CONFIG_X86_SMP BUILD_INTERRUPT(reschedule_interrupt,RESCHEDULE_VECTOR) -BUILD_INTERRUPT(invalidate_interrupt,INVALIDATE_TLB_VECTOR) BUILD_INTERRUPT(call_function_interrupt,CALL_FUNCTION_VECTOR) BUILD_INTERRUPT(call_function_single_interrupt,CALL_FUNCTION_SINGLE_VECTOR) BUILD_INTERRUPT(irq_move_cleanup_interrupt,IRQ_MOVE_CLEANUP_VECTOR) + +BUILD_INTERRUPT3(invalidate_interrupt0,INVALIDATE_TLB_VECTOR_START+0, + smp_invalidate_interrupt) +BUILD_INTERRUPT3(invalidate_interrupt1,INVALIDATE_TLB_VECTOR_START+1, + smp_invalidate_interrupt) +BUILD_INTERRUPT3(invalidate_interrupt2,INVALIDATE_TLB_VECTOR_START+2, + smp_invalidate_interrupt) +BUILD_INTERRUPT3(invalidate_interrupt3,INVALIDATE_TLB_VECTOR_START+3, + smp_invalidate_interrupt) +BUILD_INTERRUPT3(invalidate_interrupt4,INVALIDATE_TLB_VECTOR_START+4, + smp_invalidate_interrupt) +BUILD_INTERRUPT3(invalidate_interrupt5,INVALIDATE_TLB_VECTOR_START+5, + smp_invalidate_interrupt) +BUILD_INTERRUPT3(invalidate_interrupt6,INVALIDATE_TLB_VECTOR_START+6, + smp_invalidate_interrupt) +BUILD_INTERRUPT3(invalidate_interrupt7,INVALIDATE_TLB_VECTOR_START+7, + smp_invalidate_interrupt) #endif /* diff --git a/arch/x86/include/asm/mach-rdc321x/gpio.h b/arch/x86/include/asm/mach-rdc321x/gpio.h deleted file mode 100644 index c210ab5788b..00000000000 --- a/arch/x86/include/asm/mach-rdc321x/gpio.h +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef _ASM_X86_MACH_RDC321X_GPIO_H -#define _ASM_X86_MACH_RDC321X_GPIO_H - -#include <linux/kernel.h> - -extern int rdc_gpio_get_value(unsigned gpio); -extern void rdc_gpio_set_value(unsigned gpio, int value); -extern int rdc_gpio_direction_input(unsigned gpio); -extern int rdc_gpio_direction_output(unsigned gpio, int value); -extern int rdc_gpio_request(unsigned gpio, const char *label); -extern void rdc_gpio_free(unsigned gpio); -extern void __init rdc321x_gpio_setup(void); - -/* Wrappers for the arch-neutral GPIO API */ - -static inline int gpio_request(unsigned gpio, const char *label) -{ - return rdc_gpio_request(gpio, label); -} - -static inline void gpio_free(unsigned gpio) -{ - might_sleep(); - rdc_gpio_free(gpio); -} - -static inline int gpio_direction_input(unsigned gpio) -{ - return rdc_gpio_direction_input(gpio); -} - -static inline int gpio_direction_output(unsigned gpio, int value) -{ - return rdc_gpio_direction_output(gpio, value); -} - -static inline int gpio_get_value(unsigned gpio) -{ - return rdc_gpio_get_value(gpio); -} - -static inline void gpio_set_value(unsigned gpio, int value) -{ - rdc_gpio_set_value(gpio, value); -} - -static inline int gpio_to_irq(unsigned gpio) -{ - return gpio; -} - -static inline int irq_to_gpio(unsigned irq) -{ - return irq; -} - -/* For cansleep */ -#include <asm-generic/gpio.h> - -#endif /* _ASM_X86_MACH_RDC321X_GPIO_H */ diff --git a/arch/x86/include/asm/mmu_context.h b/arch/x86/include/asm/mmu_context.h index 8aeeb3fd73d..52948df9cd1 100644 --- a/arch/x86/include/asm/mmu_context.h +++ b/arch/x86/include/asm/mmu_context.h @@ -21,11 +21,54 @@ static inline void paravirt_activate_mm(struct mm_struct *prev, int init_new_context(struct task_struct *tsk, struct mm_struct *mm); void destroy_context(struct mm_struct *mm); -#ifdef CONFIG_X86_32 -# include "mmu_context_32.h" -#else -# include "mmu_context_64.h" + +static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) +{ +#ifdef CONFIG_SMP + if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK) + percpu_write(cpu_tlbstate.state, TLBSTATE_LAZY); +#endif +} + +static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, + struct task_struct *tsk) +{ + unsigned cpu = smp_processor_id(); + + if (likely(prev != next)) { + /* stop flush ipis for the previous mm */ + cpu_clear(cpu, prev->cpu_vm_mask); +#ifdef CONFIG_SMP + percpu_write(cpu_tlbstate.state, TLBSTATE_OK); + percpu_write(cpu_tlbstate.active_mm, next); #endif + cpu_set(cpu, next->cpu_vm_mask); + + /* Re-load page tables */ + load_cr3(next->pgd); + + /* + * load the LDT, if the LDT is different: + */ + if (unlikely(prev->context.ldt != next->context.ldt)) + load_LDT_nolock(&next->context); + } +#ifdef CONFIG_SMP + else { + percpu_write(cpu_tlbstate.state, TLBSTATE_OK); + BUG_ON(percpu_read(cpu_tlbstate.active_mm) != next); + + if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) { + /* We were in lazy tlb mode and leave_mm disabled + * tlb flush IPI delivery. We must reload CR3 + * to make sure to use no freed page tables. + */ + load_cr3(next->pgd); + load_LDT_nolock(&next->context); + } + } +#endif +} #define activate_mm(prev, next) \ do { \ @@ -33,5 +76,17 @@ do { \ switch_mm((prev), (next), NULL); \ } while (0); +#ifdef CONFIG_X86_32 +#define deactivate_mm(tsk, mm) \ +do { \ + loadsegment(gs, 0); \ +} while (0) +#else +#define deactivate_mm(tsk, mm) \ +do { \ + load_gs_index(0); \ + loadsegment(fs, 0); \ +} while (0) +#endif #endif /* _ASM_X86_MMU_CONTEXT_H */ diff --git a/arch/x86/include/asm/mmu_context_32.h b/arch/x86/include/asm/mmu_context_32.h deleted file mode 100644 index 7e98ce1d2c0..00000000000 --- a/arch/x86/include/asm/mmu_context_32.h +++ /dev/null @@ -1,55 +0,0 @@ -#ifndef _ASM_X86_MMU_CONTEXT_32_H -#define _ASM_X86_MMU_CONTEXT_32_H - -static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -#ifdef CONFIG_SMP - if (x86_read_percpu(cpu_tlbstate.state) == TLBSTATE_OK) - x86_write_percpu(cpu_tlbstate.state, TLBSTATE_LAZY); -#endif -} - -static inline void switch_mm(struct mm_struct *prev, - struct mm_struct *next, - struct task_struct *tsk) -{ - int cpu = smp_processor_id(); - - if (likely(prev != next)) { - /* stop flush ipis for the previous mm */ - cpu_clear(cpu, prev->cpu_vm_mask); -#ifdef CONFIG_SMP - x86_write_percpu(cpu_tlbstate.state, TLBSTATE_OK); - x86_write_percpu(cpu_tlbstate.active_mm, next); -#endif - cpu_set(cpu, next->cpu_vm_mask); - - /* Re-load page tables */ - load_cr3(next->pgd); - - /* - * load the LDT, if the LDT is different: - */ - if (unlikely(prev->context.ldt != next->context.ldt)) - load_LDT_nolock(&next->context); - } -#ifdef CONFIG_SMP - else { - x86_write_percpu(cpu_tlbstate.state, TLBSTATE_OK); - BUG_ON(x86_read_percpu(cpu_tlbstate.active_mm) != next); - - if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) { - /* We were in lazy tlb mode and leave_mm disabled - * tlb flush IPI delivery. We must reload %cr3. - */ - load_cr3(next->pgd); - load_LDT_nolock(&next->context); - } - } -#endif -} - -#define deactivate_mm(tsk, mm) \ - asm("movl %0,%%gs": :"r" (0)); - -#endif /* _ASM_X86_MMU_CONTEXT_32_H */ diff --git a/arch/x86/include/asm/mmu_context_64.h b/arch/x86/include/asm/mmu_context_64.h deleted file mode 100644 index 677d36e9540..00000000000 --- a/arch/x86/include/asm/mmu_context_64.h +++ /dev/null @@ -1,54 +0,0 @@ -#ifndef _ASM_X86_MMU_CONTEXT_64_H -#define _ASM_X86_MMU_CONTEXT_64_H - -#include <asm/pda.h> - -static inline void enter_lazy_tlb(struct mm_struct *mm, struct task_struct *tsk) -{ -#ifdef CONFIG_SMP - if (read_pda(mmu_state) == TLBSTATE_OK) - write_pda(mmu_state, TLBSTATE_LAZY); -#endif -} - -static inline void switch_mm(struct mm_struct *prev, struct mm_struct *next, - struct task_struct *tsk) -{ - unsigned cpu = smp_processor_id(); - if (likely(prev != next)) { - /* stop flush ipis for the previous mm */ - cpu_clear(cpu, prev->cpu_vm_mask); -#ifdef CONFIG_SMP - write_pda(mmu_state, TLBSTATE_OK); - write_pda(active_mm, next); -#endif - cpu_set(cpu, next->cpu_vm_mask); - load_cr3(next->pgd); - - if (unlikely(next->context.ldt != prev->context.ldt)) - load_LDT_nolock(&next->context); - } -#ifdef CONFIG_SMP - else { - write_pda(mmu_state, TLBSTATE_OK); - if (read_pda(active_mm) != next) - BUG(); - if (!cpu_test_and_set(cpu, next->cpu_vm_mask)) { - /* We were in lazy tlb mode and leave_mm disabled - * tlb flush IPI delivery. We must reload CR3 - * to make sure to use no freed page tables. - */ - load_cr3(next->pgd); - load_LDT_nolock(&next->context); - } - } -#endif -} - -#define deactivate_mm(tsk, mm) \ -do { \ - load_gs_index(0); \ - asm volatile("movl %0,%%fs"::"r"(0)); \ -} while (0) - -#endif /* _ASM_X86_MMU_CONTEXT_64_H */ diff --git a/arch/x86/include/asm/mpspec_def.h b/arch/x86/include/asm/mpspec_def.h index 59568bc4767..4a7f96d7c18 100644 --- a/arch/x86/include/asm/mpspec_def.h +++ b/arch/x86/include/asm/mpspec_def.h @@ -24,17 +24,18 @@ # endif #endif -struct intel_mp_floating { - char mpf_signature[4]; /* "_MP_" */ - unsigned int mpf_physptr; /* Configuration table address */ - unsigned char mpf_length; /* Our length (paragraphs) */ - unsigned char mpf_specification;/* Specification version */ - unsigned char mpf_checksum; /* Checksum (makes sum 0) */ - unsigned char mpf_feature1; /* Standard or configuration ? */ - unsigned char mpf_feature2; /* Bit7 set for IMCR|PIC */ - unsigned char mpf_feature3; /* Unused (0) */ - unsigned char mpf_feature4; /* Unused (0) */ - unsigned char mpf_feature5; /* Unused (0) */ +/* Intel MP Floating Pointer Structure */ +struct mpf_intel { + char signature[4]; /* "_MP_" */ + unsigned int physptr; /* Configuration table address */ + unsigned char length; /* Our length (paragraphs) */ + unsigned char specification; /* Specification version */ + unsigned char checksum; /* Checksum (makes sum 0) */ + unsigned char feature1; /* Standard or configuration ? */ + unsigned char feature2; /* Bit7 set for IMCR|PIC */ + unsigned char feature3; /* Unused (0) */ + unsigned char feature4; /* Unused (0) */ + unsigned char feature5; /* Unused (0) */ }; #define MPC_SIGNATURE "PCMP" diff --git a/arch/x86/include/asm/msr-index.h b/arch/x86/include/asm/msr-index.h index cb58643947b..358acc59ae0 100644 --- a/arch/x86/include/asm/msr-index.h +++ b/arch/x86/include/asm/msr-index.h @@ -202,6 +202,35 @@ #define MSR_IA32_THERM_STATUS 0x0000019c #define MSR_IA32_MISC_ENABLE 0x000001a0 +/* MISC_ENABLE bits: architectural */ +#define MSR_IA32_MISC_ENABLE_FAST_STRING (1ULL << 0) +#define MSR_IA32_MISC_ENABLE_TCC (1ULL << 1) +#define MSR_IA32_MISC_ENABLE_EMON (1ULL << 7) +#define MSR_IA32_MISC_ENABLE_BTS_UNAVAIL (1ULL << 11) +#define MSR_IA32_MISC_ENABLE_PEBS_UNAVAIL (1ULL << 12) +#define MSR_IA32_MISC_ENABLE_ENHANCED_SPEEDSTEP (1ULL << 16) +#define MSR_IA32_MISC_ENABLE_MWAIT (1ULL << 18) +#define MSR_IA32_MISC_ENABLE_LIMIT_CPUID (1ULL << 22) +#define MSR_IA32_MISC_ENABLE_XTPR_DISABLE (1ULL << 23) +#define MSR_IA32_MISC_ENABLE_XD_DISABLE (1ULL << 34) + +/* MISC_ENABLE bits: model-specific, meaning may vary from core to core */ +#define MSR_IA32_MISC_ENABLE_X87_COMPAT (1ULL << 2) +#define MSR_IA32_MISC_ENABLE_TM1 (1ULL << 3) +#define MSR_IA32_MISC_ENABLE_SPLIT_LOCK_DISABLE (1ULL << 4) +#define MSR_IA32_MISC_ENABLE_L3CACHE_DISABLE (1ULL << 6) +#define MSR_IA32_MISC_ENABLE_SUPPRESS_LOCK (1ULL << 8) +#define MSR_IA32_MISC_ENABLE_PREFETCH_DISABLE (1ULL << 9) +#define MSR_IA32_MISC_ENABLE_FERR (1ULL << 10) +#define MSR_IA32_MISC_ENABLE_FERR_MULTIPLEX (1ULL << 10) +#define MSR_IA32_MISC_ENABLE_TM2 (1ULL << 13) +#define MSR_IA32_MISC_ENABLE_ADJ_PREF_DISABLE (1ULL << 19) +#define MSR_IA32_MISC_ENABLE_SPEEDSTEP_LOCK (1ULL << 20) +#define MSR_IA32_MISC_ENABLE_L1D_CONTEXT (1ULL << 24) +#define MSR_IA32_MISC_ENABLE_DCU_PREF_DISABLE (1ULL << 37) +#define MSR_IA32_MISC_ENABLE_TURBO_DISABLE (1ULL << 38) +#define MSR_IA32_MISC_ENABLE_IP_PREF_DISABLE (1ULL << 39) + /* Intel Model 6 */ #define MSR_P6_EVNTSEL0 0x00000186 #define MSR_P6_EVNTSEL1 0x00000187 diff --git a/arch/x86/include/asm/page.h b/arch/x86/include/asm/page.h index e9873a2e869..6b9810859da 100644 --- a/arch/x86/include/asm/page.h +++ b/arch/x86/include/asm/page.h @@ -147,7 +147,7 @@ static inline pteval_t native_pte_val(pte_t pte) return pte.pte; } -static inline pteval_t native_pte_flags(pte_t pte) +static inline pteval_t pte_flags(pte_t pte) { return native_pte_val(pte) & PTE_FLAGS_MASK; } @@ -173,7 +173,6 @@ static inline pteval_t native_pte_flags(pte_t pte) #endif #define pte_val(x) native_pte_val(x) -#define pte_flags(x) native_pte_flags(x) #define __pte(x) native_make_pte(x) #endif /* CONFIG_PARAVIRT */ diff --git a/arch/x86/include/asm/page_64.h b/arch/x86/include/asm/page_64.h index 5ebca29f44f..e27fdbe5f9e 100644 --- a/arch/x86/include/asm/page_64.h +++ b/arch/x86/include/asm/page_64.h @@ -13,8 +13,8 @@ #define DEBUG_STACK_ORDER (EXCEPTION_STACK_ORDER + 1) #define DEBUG_STKSZ (PAGE_SIZE << DEBUG_STACK_ORDER) -#define IRQSTACK_ORDER 2 -#define IRQSTACKSIZE (PAGE_SIZE << IRQSTACK_ORDER) +#define IRQ_STACK_ORDER 2 +#define IRQ_STACK_SIZE (PAGE_SIZE << IRQ_STACK_ORDER) #define STACKFAULT_STACK 1 #define DOUBLEFAULT_STACK 2 diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h index ba3e2ff6aed..7e674ea80f0 100644 --- a/arch/x86/include/asm/paravirt.h +++ b/arch/x86/include/asm/paravirt.h @@ -244,7 +244,8 @@ struct pv_mmu_ops { void (*flush_tlb_user)(void); void (*flush_tlb_kernel)(void); void (*flush_tlb_single)(unsigned long addr); - void (*flush_tlb_others)(const cpumask_t *cpus, struct mm_struct *mm, + void (*flush_tlb_others)(const struct cpumask *cpus, + struct mm_struct *mm, unsigned long va); /* Hooks for allocating and freeing a pagetable top-level */ @@ -279,7 +280,6 @@ struct pv_mmu_ops { pte_t *ptep, pte_t pte); pteval_t (*pte_val)(pte_t); - pteval_t (*pte_flags)(pte_t); pte_t (*make_pte)(pteval_t pte); pgdval_t (*pgd_val)(pgd_t); @@ -984,10 +984,11 @@ static inline void __flush_tlb_single(unsigned long addr) PVOP_VCALL1(pv_mmu_ops.flush_tlb_single, addr); } -static inline void flush_tlb_others(cpumask_t cpumask, struct mm_struct *mm, +static inline void flush_tlb_others(const struct cpumask *cpumask, + struct mm_struct *mm, unsigned long va) { - PVOP_VCALL3(pv_mmu_ops.flush_tlb_others, &cpumask, mm, va); + PVOP_VCALL3(pv_mmu_ops.flush_tlb_others, cpumask, mm, va); } static inline int paravirt_pgd_alloc(struct mm_struct *mm) @@ -1084,23 +1085,6 @@ static inline pteval_t pte_val(pte_t pte) return ret; } -static inline pteval_t pte_flags(pte_t pte) -{ - pteval_t ret; - - if (sizeof(pteval_t) > sizeof(long)) - ret = PVOP_CALL2(pteval_t, pv_mmu_ops.pte_flags, - pte.pte, (u64)pte.pte >> 32); - else - ret = PVOP_CALL1(pteval_t, pv_mmu_ops.pte_flags, - pte.pte); - -#ifdef CONFIG_PARAVIRT_DEBUG - BUG_ON(ret & PTE_PFN_MASK); -#endif - return ret; -} - static inline pgd_t __pgd(pgdval_t val) { pgdval_t ret; @@ -1389,8 +1373,6 @@ static inline void __set_fixmap(unsigned /* enum fixed_addresses */ idx, void _paravirt_nop(void); #define paravirt_nop ((void *)_paravirt_nop) -void paravirt_use_bytelocks(void); - #ifdef CONFIG_SMP static inline int __raw_spin_is_locked(struct raw_spinlock *lock) diff --git a/arch/x86/include/asm/pat.h b/arch/x86/include/asm/pat.h index b8493b3b989..9709fdff661 100644 --- a/arch/x86/include/asm/pat.h +++ b/arch/x86/include/asm/pat.h @@ -5,10 +5,8 @@ #ifdef CONFIG_X86_PAT extern int pat_enabled; -extern void validate_pat_support(struct cpuinfo_x86 *c); #else static const int pat_enabled; -static inline void validate_pat_support(struct cpuinfo_x86 *c) { } #endif extern void pat_init(void); @@ -17,6 +15,4 @@ extern int reserve_memtype(u64 start, u64 end, unsigned long req_type, unsigned long *ret_type); extern int free_memtype(u64 start, u64 end); -extern void pat_disable(char *reason); - #endif /* _ASM_X86_PAT_H */ diff --git a/arch/x86/include/asm/pda.h b/arch/x86/include/asm/pda.h deleted file mode 100644 index 2fbfff88df3..00000000000 --- a/arch/x86/include/asm/pda.h +++ /dev/null @@ -1,137 +0,0 @@ -#ifndef _ASM_X86_PDA_H -#define _ASM_X86_PDA_H - -#ifndef __ASSEMBLY__ -#include <linux/stddef.h> -#include <linux/types.h> -#include <linux/cache.h> -#include <asm/page.h> - -/* Per processor datastructure. %gs points to it while the kernel runs */ -struct x8664_pda { - struct task_struct *pcurrent; /* 0 Current process */ - unsigned long data_offset; /* 8 Per cpu data offset from linker - address */ - unsigned long kernelstack; /* 16 top of kernel stack for current */ - unsigned long oldrsp; /* 24 user rsp for system call */ - int irqcount; /* 32 Irq nesting counter. Starts -1 */ - unsigned int cpunumber; /* 36 Logical CPU number */ -#ifdef CONFIG_CC_STACKPROTECTOR - unsigned long stack_canary; /* 40 stack canary value */ - /* gcc-ABI: this canary MUST be at - offset 40!!! */ -#endif - char *irqstackptr; - short nodenumber; /* number of current node (32k max) */ - short in_bootmem; /* pda lives in bootmem */ - unsigned int __softirq_pending; - unsigned int __nmi_count; /* number of NMI on this CPUs */ - short mmu_state; - short isidle; - struct mm_struct *active_mm; - unsigned apic_timer_irqs; - unsigned irq0_irqs; - unsigned irq_resched_count; - unsigned irq_call_count; - unsigned irq_tlb_count; - unsigned irq_thermal_count; - unsigned irq_threshold_count; - unsigned irq_spurious_count; -} ____cacheline_aligned_in_smp; - -extern struct x8664_pda **_cpu_pda; -extern void pda_init(int); - -#define cpu_pda(i) (_cpu_pda[i]) - -/* - * There is no fast way to get the base address of the PDA, all the accesses - * have to mention %fs/%gs. So it needs to be done this Torvaldian way. - */ -extern void __bad_pda_field(void) __attribute__((noreturn)); - -/* - * proxy_pda doesn't actually exist, but tell gcc it is accessed for - * all PDA accesses so it gets read/write dependencies right. - */ -extern struct x8664_pda _proxy_pda; - -#define pda_offset(field) offsetof(struct x8664_pda, field) - -#define pda_to_op(op, field, val) \ -do { \ - typedef typeof(_proxy_pda.field) T__; \ - if (0) { T__ tmp__; tmp__ = (val); } /* type checking */ \ - switch (sizeof(_proxy_pda.field)) { \ - case 2: \ - asm(op "w %1,%%gs:%c2" : \ - "+m" (_proxy_pda.field) : \ - "ri" ((T__)val), \ - "i"(pda_offset(field))); \ - break; \ - case 4: \ - asm(op "l %1,%%gs:%c2" : \ - "+m" (_proxy_pda.field) : \ - "ri" ((T__)val), \ - "i" (pda_offset(field))); \ - break; \ - case 8: \ - asm(op "q %1,%%gs:%c2": \ - "+m" (_proxy_pda.field) : \ - "ri" ((T__)val), \ - "i"(pda_offset(field))); \ - break; \ - default: \ - __bad_pda_field(); \ - } \ -} while (0) - -#define pda_from_op(op, field) \ -({ \ - typeof(_proxy_pda.field) ret__; \ - switch (sizeof(_proxy_pda.field)) { \ - case 2: \ - asm(op "w %%gs:%c1,%0" : \ - "=r" (ret__) : \ - "i" (pda_offset(field)), \ - "m" (_proxy_pda.field)); \ - break; \ - case 4: \ - asm(op "l %%gs:%c1,%0": \ - "=r" (ret__): \ - "i" (pda_offset(field)), \ - "m" (_proxy_pda.field)); \ - break; \ - case 8: \ - asm(op "q %%gs:%c1,%0": \ - "=r" (ret__) : \ - "i" (pda_offset(field)), \ - "m" (_proxy_pda.field)); \ - break; \ - default: \ - __bad_pda_field(); \ - } \ - ret__; \ -}) - -#define read_pda(field) pda_from_op("mov", field) -#define write_pda(field, val) pda_to_op("mov", field, val) -#define add_pda(field, val) pda_to_op("add", field, val) -#define sub_pda(field, val) pda_to_op("sub", field, val) -#define or_pda(field, val) pda_to_op("or", field, val) - -/* This is not atomic against other CPUs -- CPU preemption needs to be off */ -#define test_and_clear_bit_pda(bit, field) \ -({ \ - int old__; \ - asm volatile("btr %2,%%gs:%c3\n\tsbbl %0,%0" \ - : "=r" (old__), "+m" (_proxy_pda.field) \ - : "dIr" (bit), "i" (pda_offset(field)) : "memory");\ - old__; \ -}) - -#endif - -#define PDA_STACKOFFSET (5*8) - -#endif /* _ASM_X86_PDA_H */ diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h index ece72053ba6..0b64af4f13a 100644 --- a/arch/x86/include/asm/percpu.h +++ b/arch/x86/include/asm/percpu.h @@ -2,53 +2,12 @@ #define _ASM_X86_PERCPU_H #ifdef CONFIG_X86_64 -#include <linux/compiler.h> - -/* Same as asm-generic/percpu.h, except that we store the per cpu offset - in the PDA. Longer term the PDA and every per cpu variable - should be just put into a single section and referenced directly - from %gs */ - -#ifdef CONFIG_SMP -#include <asm/pda.h> - -#define __per_cpu_offset(cpu) (cpu_pda(cpu)->data_offset) -#define __my_cpu_offset read_pda(data_offset) - -#define per_cpu_offset(x) (__per_cpu_offset(x)) - +#define __percpu_seg gs +#define __percpu_mov_op movq +#else +#define __percpu_seg fs +#define __percpu_mov_op movl #endif -#include <asm-generic/percpu.h> - -DECLARE_PER_CPU(struct x8664_pda, pda); - -/* - * These are supposed to be implemented as a single instruction which - * operates on the per-cpu data base segment. x86-64 doesn't have - * that yet, so this is a fairly inefficient workaround for the - * meantime. The single instruction is atomic with respect to - * preemption and interrupts, so we need to explicitly disable - * interrupts here to achieve the same effect. However, because it - * can be used from within interrupt-disable/enable, we can't actually - * disable interrupts; disabling preemption is enough. - */ -#define x86_read_percpu(var) \ - ({ \ - typeof(per_cpu_var(var)) __tmp; \ - preempt_disable(); \ - __tmp = __get_cpu_var(var); \ - preempt_enable(); \ - __tmp; \ - }) - -#define x86_write_percpu(var, val) \ - do { \ - preempt_disable(); \ - __get_cpu_var(var) = (val); \ - preempt_enable(); \ - } while(0) - -#else /* CONFIG_X86_64 */ #ifdef __ASSEMBLY__ @@ -65,47 +24,26 @@ DECLARE_PER_CPU(struct x8664_pda, pda); * PER_CPU(cpu_gdt_descr, %ebx) */ #ifdef CONFIG_SMP -#define PER_CPU(var, reg) \ - movl %fs:per_cpu__##this_cpu_off, reg; \ +#define PER_CPU(var, reg) \ + __percpu_mov_op %__percpu_seg:per_cpu__this_cpu_off, reg; \ lea per_cpu__##var(reg), reg -#define PER_CPU_VAR(var) %fs:per_cpu__##var +#define PER_CPU_VAR(var) %__percpu_seg:per_cpu__##var #else /* ! SMP */ -#define PER_CPU(var, reg) \ - movl $per_cpu__##var, reg +#define PER_CPU(var, reg) \ + __percpu_mov_op $per_cpu__##var, reg #define PER_CPU_VAR(var) per_cpu__##var #endif /* SMP */ #else /* ...!ASSEMBLY */ -/* - * PER_CPU finds an address of a per-cpu variable. - * - * Args: - * var - variable name - * cpu - 32bit register containing the current CPU number - * - * The resulting address is stored in the "cpu" argument. - * - * Example: - * PER_CPU(cpu_gdt_descr, %ebx) - */ -#ifdef CONFIG_SMP - -#define __my_cpu_offset x86_read_percpu(this_cpu_off) +#include <linux/stringify.h> -/* fs segment starts at (positive) offset == __per_cpu_offset[cpu] */ -#define __percpu_seg "%%fs:" - -#else /* !SMP */ - -#define __percpu_seg "" - -#endif /* SMP */ - -#include <asm-generic/percpu.h> - -/* We can use this directly for local CPU (faster). */ -DECLARE_PER_CPU(unsigned long, this_cpu_off); +#ifdef CONFIG_SMP +#define __percpu_arg(x) "%%"__stringify(__percpu_seg)":%P" #x +#define __my_cpu_offset percpu_read(this_cpu_off) +#else +#define __percpu_arg(x) "%" #x +#endif /* For arch-specific code, we can use direct single-insn ops (they * don't give an lvalue though). */ @@ -120,20 +58,25 @@ do { \ } \ switch (sizeof(var)) { \ case 1: \ - asm(op "b %1,"__percpu_seg"%0" \ + asm(op "b %1,"__percpu_arg(0) \ : "+m" (var) \ : "ri" ((T__)val)); \ break; \ case 2: \ - asm(op "w %1,"__percpu_seg"%0" \ + asm(op "w %1,"__percpu_arg(0) \ : "+m" (var) \ : "ri" ((T__)val)); \ break; \ case 4: \ - asm(op "l %1,"__percpu_seg"%0" \ + asm(op "l %1,"__percpu_arg(0) \ : "+m" (var) \ : "ri" ((T__)val)); \ break; \ + case 8: \ + asm(op "q %1,"__percpu_arg(0) \ + : "+m" (var) \ + : "re" ((T__)val)); \ + break; \ default: __bad_percpu_size(); \ } \ } while (0) @@ -143,17 +86,22 @@ do { \ typeof(var) ret__; \ switch (sizeof(var)) { \ case 1: \ - asm(op "b "__percpu_seg"%1,%0" \ + asm(op "b "__percpu_arg(1)",%0" \ : "=r" (ret__) \ : "m" (var)); \ break; \ case 2: \ - asm(op "w "__percpu_seg"%1,%0" \ + asm(op "w "__percpu_arg(1)",%0" \ : "=r" (ret__) \ : "m" (var)); \ break; \ case 4: \ - asm(op "l "__percpu_seg"%1,%0" \ + asm(op "l "__percpu_arg(1)",%0" \ + : "=r" (ret__) \ + : "m" (var)); \ + break; \ + case 8: \ + asm(op "q "__percpu_arg(1)",%0" \ : "=r" (ret__) \ : "m" (var)); \ break; \ @@ -162,13 +110,30 @@ do { \ ret__; \ }) -#define x86_read_percpu(var) percpu_from_op("mov", per_cpu__##var) -#define x86_write_percpu(var, val) percpu_to_op("mov", per_cpu__##var, val) -#define x86_add_percpu(var, val) percpu_to_op("add", per_cpu__##var, val) -#define x86_sub_percpu(var, val) percpu_to_op("sub", per_cpu__##var, val) -#define x86_or_percpu(var, val) percpu_to_op("or", per_cpu__##var, val) +#define percpu_read(var) percpu_from_op("mov", per_cpu__##var) +#define percpu_write(var, val) percpu_to_op("mov", per_cpu__##var, val) +#define percpu_add(var, val) percpu_to_op("add", per_cpu__##var, val) +#define percpu_sub(var, val) percpu_to_op("sub", per_cpu__##var, val) +#define percpu_and(var, val) percpu_to_op("and", per_cpu__##var, val) +#define percpu_or(var, val) percpu_to_op("or", per_cpu__##var, val) +#define percpu_xor(var, val) percpu_to_op("xor", per_cpu__##var, val) + +/* This is not atomic against other CPUs -- CPU preemption needs to be off */ +#define x86_test_and_clear_bit_percpu(bit, var) \ +({ \ + int old__; \ + asm volatile("btr %2,"__percpu_arg(1)"\n\tsbbl %0,%0" \ + : "=r" (old__), "+m" (per_cpu__##var) \ + : "dIr" (bit)); \ + old__; \ +}) + +#include <asm-generic/percpu.h> + +/* We can use this directly for local CPU (faster). */ +DECLARE_PER_CPU(unsigned long, this_cpu_off); + #endif /* !__ASSEMBLY__ */ -#endif /* !CONFIG_X86_64 */ #ifdef CONFIG_SMP @@ -195,9 +160,9 @@ do { \ #define early_per_cpu_ptr(_name) (_name##_early_ptr) #define early_per_cpu_map(_name, _idx) (_name##_early_map[_idx]) #define early_per_cpu(_name, _cpu) \ - (early_per_cpu_ptr(_name) ? \ - early_per_cpu_ptr(_name)[_cpu] : \ - per_cpu(_name, _cpu)) + *(early_per_cpu_ptr(_name) ? \ + &early_per_cpu_ptr(_name)[_cpu] : \ + &per_cpu(_name, _cpu)) #else /* !CONFIG_SMP */ #define DEFINE_EARLY_PER_CPU(_type, _name, _initvalue) \ diff --git a/arch/x86/include/asm/pgalloc.h b/arch/x86/include/asm/pgalloc.h index cb7c151a8bf..dd14c54ac71 100644 --- a/arch/x86/include/asm/pgalloc.h +++ b/arch/x86/include/asm/pgalloc.h @@ -42,6 +42,7 @@ static inline void pte_free_kernel(struct mm_struct *mm, pte_t *pte) static inline void pte_free(struct mm_struct *mm, struct page *pte) { + pgtable_page_dtor(pte); __free_page(pte); } diff --git a/arch/x86/include/asm/pgtable.h b/arch/x86/include/asm/pgtable.h index 06bbcbd66e9..6ceaef08486 100644 --- a/arch/x86/include/asm/pgtable.h +++ b/arch/x86/include/asm/pgtable.h @@ -240,64 +240,78 @@ static inline int pmd_large(pmd_t pte) (_PAGE_PSE | _PAGE_PRESENT); } +static inline pte_t pte_set_flags(pte_t pte, pteval_t set) +{ + pteval_t v = native_pte_val(pte); + + return native_make_pte(v | set); +} + +static inline pte_t pte_clear_flags(pte_t pte, pteval_t clear) +{ + pteval_t v = native_pte_val(pte); + + return native_make_pte(v & ~clear); +} + static inline pte_t pte_mkclean(pte_t pte) { - return __pte(pte_val(pte) & ~_PAGE_DIRTY); + return pte_clear_flags(pte, _PAGE_DIRTY); } static inline pte_t pte_mkold(pte_t pte) { - return __pte(pte_val(pte) & ~_PAGE_ACCESSED); + return pte_clear_flags(pte, _PAGE_ACCESSED); } static inline pte_t pte_wrprotect(pte_t pte) { - return __pte(pte_val(pte) & ~_PAGE_RW); + return pte_clear_flags(pte, _PAGE_RW); } static inline pte_t pte_mkexec(pte_t pte) { - return __pte(pte_val(pte) & ~_PAGE_NX); + return pte_clear_flags(pte, _PAGE_NX); } static inline pte_t pte_mkdirty(pte_t pte) { - return __pte(pte_val(pte) | _PAGE_DIRTY); + return pte_set_flags(pte, _PAGE_DIRTY); } static inline pte_t pte_mkyoung(pte_t pte) { - return __pte(pte_val(pte) | _PAGE_ACCESSED); + return pte_set_flags(pte, _PAGE_ACCESSED); } static inline pte_t pte_mkwrite(pte_t pte) { - return __pte(pte_val(pte) | _PAGE_RW); + return pte_set_flags(pte, _PAGE_RW); } static inline pte_t pte_mkhuge(pte_t pte) { - return __pte(pte_val(pte) | _PAGE_PSE); + return pte_set_flags(pte, _PAGE_PSE); } static inline pte_t pte_clrhuge(pte_t pte) { - return __pte(pte_val(pte) & ~_PAGE_PSE); + return pte_clear_flags(pte, _PAGE_PSE); } static inline pte_t pte_mkglobal(pte_t pte) { - return __pte(pte_val(pte) | _PAGE_GLOBAL); + return pte_set_flags(pte, _PAGE_GLOBAL); } static inline pte_t pte_clrglobal(pte_t pte) { - return __pte(pte_val(pte) & ~_PAGE_GLOBAL); + return pte_clear_flags(pte, _PAGE_GLOBAL); } static inline pte_t pte_mkspecial(pte_t pte) { - return __pte(pte_val(pte) | _PAGE_SPECIAL); + return pte_set_flags(pte, _PAGE_SPECIAL); } extern pteval_t __supported_pte_mask; diff --git a/arch/x86/include/asm/pgtable_64.h b/arch/x86/include/asm/pgtable_64.h index ba09289acca..1df9637dfda 100644 --- a/arch/x86/include/asm/pgtable_64.h +++ b/arch/x86/include/asm/pgtable_64.h @@ -11,7 +11,6 @@ #include <asm/processor.h> #include <linux/bitops.h> #include <linux/threads.h> -#include <asm/pda.h> extern pud_t level3_kernel_pgt[512]; extern pud_t level3_ident_pgt[512]; diff --git a/arch/x86/include/asm/prctl.h b/arch/x86/include/asm/prctl.h index a8894647dd9..3ac5032fae0 100644 --- a/arch/x86/include/asm/prctl.h +++ b/arch/x86/include/asm/prctl.h @@ -6,8 +6,4 @@ #define ARCH_GET_FS 0x1003 #define ARCH_GET_GS 0x1004 -#ifdef CONFIG_X86_64 -extern long sys_arch_prctl(int, unsigned long); -#endif /* CONFIG_X86_64 */ - #endif /* _ASM_X86_PRCTL_H */ diff --git a/arch/x86/include/asm/processor.h b/arch/x86/include/asm/processor.h index 091cd8855f2..84afa0d4d71 100644 --- a/arch/x86/include/asm/processor.h +++ b/arch/x86/include/asm/processor.h @@ -73,7 +73,7 @@ struct cpuinfo_x86 { char pad0; #else /* Number of 4K pages in DTLB/ITLB combined(in pages): */ - int x86_tlbsize; + int x86_tlbsize; __u8 x86_virt_bits; __u8 x86_phys_bits; #endif @@ -378,6 +378,22 @@ union thread_xstate { #ifdef CONFIG_X86_64 DECLARE_PER_CPU(struct orig_ist, orig_ist); + +union irq_stack_union { + char irq_stack[IRQ_STACK_SIZE]; + /* + * GCC hardcodes the stack canary as %gs:40. Since the + * irq_stack is the object at %gs:0, we reserve the bottom + * 48 bytes of the irq stack for the canary. + */ + struct { + char gs_base[40]; + unsigned long stack_canary; + }; +}; + +DECLARE_PER_CPU(union irq_stack_union, irq_stack_union); +DECLARE_PER_CPU(char *, irq_stack_ptr); #endif extern void print_cpu_info(struct cpuinfo_x86 *); @@ -754,7 +770,6 @@ extern struct desc_ptr early_gdt_descr; extern void cpu_set_gdt(int); extern void switch_to_new_gdt(void); extern void cpu_init(void); -extern void init_gdt(int cpu); static inline unsigned long get_debugctlmsr(void) { diff --git a/arch/x86/include/asm/mach-rdc321x/rdc321x_defs.h b/arch/x86/include/asm/rdc321x_defs.h index c8e9c8bed3d..c8e9c8bed3d 100644 --- a/arch/x86/include/asm/mach-rdc321x/rdc321x_defs.h +++ b/arch/x86/include/asm/rdc321x_defs.h diff --git a/arch/x86/include/asm/setup.h b/arch/x86/include/asm/setup.h index ebe858cdc8a..45b40278b58 100644 --- a/arch/x86/include/asm/setup.h +++ b/arch/x86/include/asm/setup.h @@ -1,6 +1,8 @@ #ifndef _ASM_X86_SETUP_H #define _ASM_X86_SETUP_H +#ifdef __KERNEL__ + #define COMMAND_LINE_SIZE 2048 #ifndef __ASSEMBLY__ @@ -8,10 +10,8 @@ /* Interrupt control for vSMPowered x86_64 systems */ void vsmp_init(void); - void setup_bios_corruption_check(void); - #ifdef CONFIG_X86_VISWS extern void visws_early_detect(void); extern int is_visws_box(void); @@ -43,7 +43,7 @@ struct x86_quirks { void (*mpc_oem_bus_info)(struct mpc_bus *m, char *name); void (*mpc_oem_pci_bus)(struct mpc_bus *m); void (*smp_read_mpc_oem)(struct mpc_oemtable *oemtable, - unsigned short oemsize); + unsigned short oemsize); int (*setup_ioapic_ids)(void); int (*update_genapic)(void); }; @@ -56,8 +56,6 @@ extern unsigned long saved_video_mode; #endif #endif /* __ASSEMBLY__ */ -#ifdef __KERNEL__ - #ifdef __i386__ #include <linux/pfn.h> @@ -100,7 +98,6 @@ extern unsigned long init_pg_tables_start; extern unsigned long init_pg_tables_end; #else -void __init x86_64_init_pda(void); void __init x86_64_start_kernel(char *real_mode); void __init x86_64_start_reservations(char *real_mode_data); diff --git a/arch/x86/include/asm/sigcontext32.h b/arch/x86/include/asm/sigcontext32.h index 6126188cf3a..ad1478c4ae1 100644 --- a/arch/x86/include/asm/sigcontext32.h +++ b/arch/x86/include/asm/sigcontext32.h @@ -1,6 +1,8 @@ #ifndef _ASM_X86_SIGCONTEXT32_H #define _ASM_X86_SIGCONTEXT32_H +#include <linux/types.h> + /* signal context for 32bit programs. */ #define X86_FXSR_MAGIC 0x0000 diff --git a/arch/x86/include/asm/smp.h b/arch/x86/include/asm/smp.h index 19953df61c5..45ef8a1b9d7 100644 --- a/arch/x86/include/asm/smp.h +++ b/arch/x86/include/asm/smp.h @@ -15,34 +15,8 @@ # include <asm/io_apic.h> # endif #endif -#include <asm/pda.h> #include <asm/thread_info.h> - -#ifdef CONFIG_X86_64 - -extern cpumask_var_t cpu_callin_mask; -extern cpumask_var_t cpu_callout_mask; -extern cpumask_var_t cpu_initialized_mask; -extern cpumask_var_t cpu_sibling_setup_mask; - -#else /* CONFIG_X86_32 */ - -extern cpumask_t cpu_callin_map; -extern cpumask_t cpu_callout_map; -extern cpumask_t cpu_initialized; -extern cpumask_t cpu_sibling_setup_map; - -#define cpu_callin_mask ((struct cpumask *)&cpu_callin_map) -#define cpu_callout_mask ((struct cpumask *)&cpu_callout_map) -#define cpu_initialized_mask ((struct cpumask *)&cpu_initialized) -#define cpu_sibling_setup_mask ((struct cpumask *)&cpu_sibling_setup_map) - -#endif /* CONFIG_X86_32 */ - -extern void (*mtrr_hook)(void); -extern void zap_low_mappings(void); - -extern int __cpuinit get_local_pda(int cpu); +#include <asm/cpumask.h> extern int smp_num_siblings; extern unsigned int num_processors; @@ -50,9 +24,7 @@ extern unsigned int num_processors; DECLARE_PER_CPU(cpumask_t, cpu_sibling_map); DECLARE_PER_CPU(cpumask_t, cpu_core_map); DECLARE_PER_CPU(u16, cpu_llc_id); -#ifdef CONFIG_X86_32 DECLARE_PER_CPU(int, cpu_number); -#endif static inline struct cpumask *cpu_sibling_mask(int cpu) { @@ -167,8 +139,6 @@ void play_dead_common(void); void native_send_call_func_ipi(const struct cpumask *mask); void native_send_call_func_single_ipi(int cpu); -extern void prefill_possible_map(void); - void smp_store_cpu_info(int id); #define cpu_physical_id(cpu) per_cpu(x86_cpu_to_apicid, cpu) @@ -177,10 +147,6 @@ static inline int num_booting_cpus(void) { return cpumask_weight(cpu_callout_mask); } -#else -static inline void prefill_possible_map(void) -{ -} #endif /* CONFIG_SMP */ extern unsigned disabled_cpus __cpuinitdata; @@ -191,11 +157,11 @@ extern unsigned disabled_cpus __cpuinitdata; * from the initial startup. We map APIC_BASE very early in page_setup(), * so this is correct in the x86 case. */ -#define raw_smp_processor_id() (x86_read_percpu(cpu_number)) +#define raw_smp_processor_id() (percpu_read(cpu_number)) extern int safe_smp_processor_id(void); #elif defined(CONFIG_X86_64_SMP) -#define raw_smp_processor_id() read_pda(cpunumber) +#define raw_smp_processor_id() (percpu_read(cpu_number)) #define stack_smp_processor_id() \ ({ \ @@ -205,10 +171,6 @@ extern int safe_smp_processor_id(void); }) #define safe_smp_processor_id() smp_processor_id() -#else /* !CONFIG_X86_32_SMP && !CONFIG_X86_64_SMP */ -#define cpu_physical_id(cpu) boot_cpu_physical_apicid -#define safe_smp_processor_id() 0 -#define stack_smp_processor_id() 0 #endif #ifdef CONFIG_X86_LOCAL_APIC @@ -251,11 +213,5 @@ static inline int hard_smp_processor_id(void) #endif /* CONFIG_X86_LOCAL_APIC */ -#ifdef CONFIG_X86_HAS_BOOT_CPU_ID -extern unsigned char boot_cpu_id; -#else -#define boot_cpu_id 0 -#endif - #endif /* __ASSEMBLY__ */ #endif /* _ASM_X86_SMP_H */ diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h index d17c91981da..139b4249a5e 100644 --- a/arch/x86/include/asm/spinlock.h +++ b/arch/x86/include/asm/spinlock.h @@ -172,70 +172,8 @@ static inline int __ticket_spin_is_contended(raw_spinlock_t *lock) return (((tmp >> TICKET_SHIFT) - tmp) & ((1 << TICKET_SHIFT) - 1)) > 1; } -#ifdef CONFIG_PARAVIRT -/* - * Define virtualization-friendly old-style lock byte lock, for use in - * pv_lock_ops if desired. - * - * This differs from the pre-2.6.24 spinlock by always using xchgb - * rather than decb to take the lock; this allows it to use a - * zero-initialized lock structure. It also maintains a 1-byte - * contention counter, so that we can implement - * __byte_spin_is_contended. - */ -struct __byte_spinlock { - s8 lock; - s8 spinners; -}; - -static inline int __byte_spin_is_locked(raw_spinlock_t *lock) -{ - struct __byte_spinlock *bl = (struct __byte_spinlock *)lock; - return bl->lock != 0; -} - -static inline int __byte_spin_is_contended(raw_spinlock_t *lock) -{ - struct __byte_spinlock *bl = (struct __byte_spinlock *)lock; - return bl->spinners != 0; -} - -static inline void __byte_spin_lock(raw_spinlock_t *lock) -{ - struct __byte_spinlock *bl = (struct __byte_spinlock *)lock; - s8 val = 1; - - asm("1: xchgb %1, %0\n" - " test %1,%1\n" - " jz 3f\n" - " " LOCK_PREFIX "incb %2\n" - "2: rep;nop\n" - " cmpb $1, %0\n" - " je 2b\n" - " " LOCK_PREFIX "decb %2\n" - " jmp 1b\n" - "3:" - : "+m" (bl->lock), "+q" (val), "+m" (bl->spinners): : "memory"); -} - -static inline int __byte_spin_trylock(raw_spinlock_t *lock) -{ - struct __byte_spinlock *bl = (struct __byte_spinlock *)lock; - u8 old = 1; - - asm("xchgb %1,%0" - : "+m" (bl->lock), "+q" (old) : : "memory"); +#ifndef CONFIG_PARAVIRT - return old == 0; -} - -static inline void __byte_spin_unlock(raw_spinlock_t *lock) -{ - struct __byte_spinlock *bl = (struct __byte_spinlock *)lock; - smp_wmb(); - bl->lock = 0; -} -#else /* !CONFIG_PARAVIRT */ static inline int __raw_spin_is_locked(raw_spinlock_t *lock) { return __ticket_spin_is_locked(lock); @@ -267,7 +205,7 @@ static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock, __raw_spin_lock(lock); } -#endif /* CONFIG_PARAVIRT */ +#endif static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock) { @@ -329,8 +267,7 @@ static inline int __raw_read_trylock(raw_rwlock_t *lock) { atomic_t *count = (atomic_t *)lock; - atomic_dec(count); - if (atomic_read(count) >= 0) + if (atomic_dec_return(count) >= 0) return 1; atomic_inc(count); return 0; diff --git a/arch/x86/include/asm/stackprotector.h b/arch/x86/include/asm/stackprotector.h new file mode 100644 index 00000000000..36a700acaf2 --- /dev/null +++ b/arch/x86/include/asm/stackprotector.h @@ -0,0 +1,38 @@ +#ifndef _ASM_STACKPROTECTOR_H +#define _ASM_STACKPROTECTOR_H 1 + +#include <asm/tsc.h> +#include <asm/processor.h> + +/* + * Initialize the stackprotector canary value. + * + * NOTE: this must only be called from functions that never return, + * and it must always be inlined. + */ +static __always_inline void boot_init_stack_canary(void) +{ + u64 canary; + u64 tsc; + + /* + * Build time only check to make sure the stack_canary is at + * offset 40 in the pda; this is a gcc ABI requirement + */ + BUILD_BUG_ON(offsetof(union irq_stack_union, stack_canary) != 40); + + /* + * We both use the random pool and the current TSC as a source + * of randomness. The TSC only matters for very early init, + * there it already has some randomness on most systems. Later + * on during the bootup the random pool has true entropy too. + */ + get_random_bytes(&canary, sizeof(canary)); + tsc = __native_read_tsc(); + canary += tsc + (tsc << 32UL); + + current->stack_canary = canary; + percpu_write(irq_stack_union.stack_canary, canary); +} + +#endif diff --git a/arch/x86/include/asm/syscalls.h b/arch/x86/include/asm/syscalls.h index 9c6797c3e56..c0b0bda754e 100644 --- a/arch/x86/include/asm/syscalls.h +++ b/arch/x86/include/asm/syscalls.h @@ -40,7 +40,7 @@ asmlinkage int sys_sigaction(int, const struct old_sigaction __user *, struct old_sigaction __user *); asmlinkage int sys_sigaltstack(unsigned long); asmlinkage unsigned long sys_sigreturn(unsigned long); -asmlinkage int sys_rt_sigreturn(struct pt_regs); +asmlinkage int sys_rt_sigreturn(unsigned long); /* kernel/ioport.c */ asmlinkage long sys_iopl(unsigned long); diff --git a/arch/x86/include/asm/system.h b/arch/x86/include/asm/system.h index 8e626ea33a1..c22383743f3 100644 --- a/arch/x86/include/asm/system.h +++ b/arch/x86/include/asm/system.h @@ -86,27 +86,44 @@ do { \ , "rcx", "rbx", "rdx", "r8", "r9", "r10", "r11", \ "r12", "r13", "r14", "r15" +#ifdef CONFIG_CC_STACKPROTECTOR +#define __switch_canary \ + "movq %P[task_canary](%%rsi),%%r8\n\t" \ + "movq %%r8,"__percpu_arg([gs_canary])"\n\t" +#define __switch_canary_oparam \ + , [gs_canary] "=m" (per_cpu_var(irq_stack_union.stack_canary)) +#define __switch_canary_iparam \ + , [task_canary] "i" (offsetof(struct task_struct, stack_canary)) +#else /* CC_STACKPROTECTOR */ +#define __switch_canary +#define __switch_canary_oparam +#define __switch_canary_iparam +#endif /* CC_STACKPROTECTOR */ + /* Save restore flags to clear handle leaking NT */ #define switch_to(prev, next, last) \ - asm volatile(SAVE_CONTEXT \ + asm volatile(SAVE_CONTEXT \ "movq %%rsp,%P[threadrsp](%[prev])\n\t" /* save RSP */ \ "movq %P[threadrsp](%[next]),%%rsp\n\t" /* restore RSP */ \ "call __switch_to\n\t" \ ".globl thread_return\n" \ "thread_return:\n\t" \ - "movq %%gs:%P[pda_pcurrent],%%rsi\n\t" \ + "movq "__percpu_arg([current_task])",%%rsi\n\t" \ + __switch_canary \ "movq %P[thread_info](%%rsi),%%r8\n\t" \ - LOCK_PREFIX "btr %[tif_fork],%P[ti_flags](%%r8)\n\t" \ "movq %%rax,%%rdi\n\t" \ - "jc ret_from_fork\n\t" \ + "testl %[_tif_fork],%P[ti_flags](%%r8)\n\t" \ + "jnz ret_from_fork\n\t" \ RESTORE_CONTEXT \ : "=a" (last) \ + __switch_canary_oparam \ : [next] "S" (next), [prev] "D" (prev), \ [threadrsp] "i" (offsetof(struct task_struct, thread.sp)), \ [ti_flags] "i" (offsetof(struct thread_info, flags)), \ - [tif_fork] "i" (TIF_FORK), \ + [_tif_fork] "i" (_TIF_FORK), \ [thread_info] "i" (offsetof(struct task_struct, stack)), \ - [pda_pcurrent] "i" (offsetof(struct x8664_pda, pcurrent)) \ + [current_task] "m" (per_cpu_var(current_task)) \ + __switch_canary_iparam \ : "memory", "cc" __EXTRA_CLOBBER) #endif diff --git a/arch/x86/include/asm/thread_info.h b/arch/x86/include/asm/thread_info.h index 98789647baa..df9d5f78385 100644 --- a/arch/x86/include/asm/thread_info.h +++ b/arch/x86/include/asm/thread_info.h @@ -40,6 +40,7 @@ struct thread_info { */ __u8 supervisor_stack[0]; #endif + int uaccess_err; }; #define INIT_THREAD_INFO(tsk) \ @@ -194,25 +195,21 @@ static inline struct thread_info *current_thread_info(void) #else /* X86_32 */ -#include <asm/pda.h> +#include <asm/percpu.h> +#define KERNEL_STACK_OFFSET (5*8) /* * macros/functions for gaining access to the thread information structure * preempt_count needs to be 1 initially, until the scheduler is functional. */ #ifndef __ASSEMBLY__ -static inline struct thread_info *current_thread_info(void) -{ - struct thread_info *ti; - ti = (void *)(read_pda(kernelstack) + PDA_STACKOFFSET - THREAD_SIZE); - return ti; -} +DECLARE_PER_CPU(unsigned long, kernel_stack); -/* do not use in interrupt context */ -static inline struct thread_info *stack_thread_info(void) +static inline struct thread_info *current_thread_info(void) { struct thread_info *ti; - asm("andq %%rsp,%0; " : "=r" (ti) : "0" (~(THREAD_SIZE - 1))); + ti = (void *)(percpu_read(kernel_stack) + + KERNEL_STACK_OFFSET - THREAD_SIZE); return ti; } @@ -220,8 +217,8 @@ static inline struct thread_info *stack_thread_info(void) /* how to get the thread information struct from ASM */ #define GET_THREAD_INFO(reg) \ - movq %gs:pda_kernelstack,reg ; \ - subq $(THREAD_SIZE-PDA_STACKOFFSET),reg + movq PER_CPU_VAR(kernel_stack),reg ; \ + subq $(THREAD_SIZE-KERNEL_STACK_OFFSET),reg #endif diff --git a/arch/x86/include/asm/timex.h b/arch/x86/include/asm/timex.h index 1287dc1347d..b5c9d45c981 100644 --- a/arch/x86/include/asm/timex.h +++ b/arch/x86/include/asm/timex.h @@ -1,18 +1,13 @@ -/* x86 architecture timex specifications */ #ifndef _ASM_X86_TIMEX_H #define _ASM_X86_TIMEX_H #include <asm/processor.h> #include <asm/tsc.h> -#ifdef CONFIG_X86_ELAN -# define PIT_TICK_RATE 1189200 /* AMD Elan has different frequency! */ -#elif defined(CONFIG_X86_RDC321X) -# define PIT_TICK_RATE 1041667 /* Underlying HZ for R8610 */ -#else -# define PIT_TICK_RATE 1193182 /* Underlying HZ */ -#endif -#define CLOCK_TICK_RATE PIT_TICK_RATE +/* The PIT ticks at this frequency (in HZ): */ +#define PIT_TICK_RATE 1193182 + +#define CLOCK_TICK_RATE PIT_TICK_RATE #define ARCH_HAS_READ_CURRENT_TIMER diff --git a/arch/x86/include/asm/tlbflush.h b/arch/x86/include/asm/tlbflush.h index 0e7bbb54911..d3539f998f8 100644 --- a/arch/x86/include/asm/tlbflush.h +++ b/arch/x86/include/asm/tlbflush.h @@ -113,7 +113,7 @@ static inline void flush_tlb_range(struct vm_area_struct *vma, __flush_tlb(); } -static inline void native_flush_tlb_others(const cpumask_t *cpumask, +static inline void native_flush_tlb_others(const struct cpumask *cpumask, struct mm_struct *mm, unsigned long va) { @@ -142,31 +142,28 @@ static inline void flush_tlb_range(struct vm_area_struct *vma, flush_tlb_mm(vma->vm_mm); } -void native_flush_tlb_others(const cpumask_t *cpumask, struct mm_struct *mm, - unsigned long va); +void native_flush_tlb_others(const struct cpumask *cpumask, + struct mm_struct *mm, unsigned long va); #define TLBSTATE_OK 1 #define TLBSTATE_LAZY 2 -#ifdef CONFIG_X86_32 struct tlb_state { struct mm_struct *active_mm; int state; - char __cacheline_padding[L1_CACHE_BYTES-8]; }; DECLARE_PER_CPU(struct tlb_state, cpu_tlbstate); -void reset_lazy_tlbstate(void); -#else static inline void reset_lazy_tlbstate(void) { + percpu_write(cpu_tlbstate.state, 0); + percpu_write(cpu_tlbstate.active_mm, &init_mm); } -#endif #endif /* SMP */ #ifndef CONFIG_PARAVIRT -#define flush_tlb_others(mask, mm, va) native_flush_tlb_others(&mask, mm, va) +#define flush_tlb_others(mask, mm, va) native_flush_tlb_others(mask, mm, va) #endif static inline void flush_tlb_kernel_range(unsigned long start, @@ -175,4 +172,6 @@ static inline void flush_tlb_kernel_range(unsigned long start, flush_tlb_all(); } +extern void zap_low_mappings(void); + #endif /* _ASM_X86_TLBFLUSH_H */ diff --git a/arch/x86/include/asm/topology.h b/arch/x86/include/asm/topology.h index 4e2f2e0aab2..77cfb2cfb38 100644 --- a/arch/x86/include/asm/topology.h +++ b/arch/x86/include/asm/topology.h @@ -74,6 +74,8 @@ static inline const struct cpumask *cpumask_of_node(int node) return &node_to_cpumask_map[node]; } +static inline void setup_node_to_cpumask_map(void) { } + #else /* CONFIG_X86_64 */ /* Mappings between node number and cpus on that node. */ @@ -83,7 +85,8 @@ extern cpumask_t *node_to_cpumask_map; DECLARE_EARLY_PER_CPU(int, x86_cpu_to_node_map); /* Returns the number of the current Node. */ -#define numa_node_id() read_pda(nodenumber) +DECLARE_PER_CPU(int, node_number); +#define numa_node_id() percpu_read(node_number) #ifdef CONFIG_DEBUG_PER_CPU_MAPS extern int cpu_to_node(int cpu); @@ -102,10 +105,7 @@ static inline int cpu_to_node(int cpu) /* Same function but used if called before per_cpu areas are setup */ static inline int early_cpu_to_node(int cpu) { - if (early_per_cpu_ptr(x86_cpu_to_node_map)) - return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu]; - - return per_cpu(x86_cpu_to_node_map, cpu); + return early_per_cpu(x86_cpu_to_node_map, cpu); } /* Returns a pointer to the cpumask of CPUs on Node 'node'. */ @@ -122,6 +122,8 @@ static inline cpumask_t node_to_cpumask(int node) #endif /* !CONFIG_DEBUG_PER_CPU_MAPS */ +extern void setup_node_to_cpumask_map(void); + /* * Replace default node_to_cpumask_ptr with optimized version * Deprecated: use "const struct cpumask *mask = cpumask_of_node(node)" @@ -192,9 +194,20 @@ extern int __node_distance(int, int); #else /* !CONFIG_NUMA */ -#define numa_node_id() 0 -#define cpu_to_node(cpu) 0 -#define early_cpu_to_node(cpu) 0 +static inline int numa_node_id(void) +{ + return 0; +} + +static inline int cpu_to_node(int cpu) +{ + return 0; +} + +static inline int early_cpu_to_node(int cpu) +{ + return 0; +} static inline const cpumask_t *cpumask_of_node(int node) { @@ -209,6 +222,8 @@ static inline int node_to_first_cpu(int node) return first_cpu(cpu_online_map); } +static inline void setup_node_to_cpumask_map(void) { } + /* * Replace default node_to_cpumask_ptr with optimized version * Deprecated: use "const struct cpumask *mask = cpumask_of_node(node)" diff --git a/arch/x86/include/asm/trampoline.h b/arch/x86/include/asm/trampoline.h index 780ba0ab94f..90f06c25221 100644 --- a/arch/x86/include/asm/trampoline.h +++ b/arch/x86/include/asm/trampoline.h @@ -13,6 +13,7 @@ extern unsigned char *trampoline_base; extern unsigned long init_rsp; extern unsigned long initial_code; +extern unsigned long initial_gs; #define TRAMPOLINE_SIZE roundup(trampoline_end - trampoline_data, PAGE_SIZE) #define TRAMPOLINE_BASE 0x6000 diff --git a/arch/x86/include/asm/uaccess.h b/arch/x86/include/asm/uaccess.h index 4340055b755..0ec6de4bcb0 100644 --- a/arch/x86/include/asm/uaccess.h +++ b/arch/x86/include/asm/uaccess.h @@ -121,7 +121,7 @@ extern int __get_user_bad(void); #define __get_user_x(size, ret, x, ptr) \ asm volatile("call __get_user_" #size \ - : "=a" (ret),"=d" (x) \ + : "=a" (ret), "=d" (x) \ : "0" (ptr)) \ /* Careful: we have to cast the result to the type of the pointer @@ -181,12 +181,12 @@ extern int __get_user_bad(void); #define __put_user_x(size, x, ptr, __ret_pu) \ asm volatile("call __put_user_" #size : "=a" (__ret_pu) \ - :"0" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx") + : "0" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx") #ifdef CONFIG_X86_32 -#define __put_user_u64(x, addr, err) \ +#define __put_user_asm_u64(x, addr, err) \ asm volatile("1: movl %%eax,0(%2)\n" \ "2: movl %%edx,4(%2)\n" \ "3:\n" \ @@ -199,12 +199,22 @@ extern int __get_user_bad(void); : "=r" (err) \ : "A" (x), "r" (addr), "i" (-EFAULT), "0" (err)) +#define __put_user_asm_ex_u64(x, addr) \ + asm volatile("1: movl %%eax,0(%1)\n" \ + "2: movl %%edx,4(%1)\n" \ + "3:\n" \ + _ASM_EXTABLE(1b, 2b - 1b) \ + _ASM_EXTABLE(2b, 3b - 2b) \ + : : "A" (x), "r" (addr)) + #define __put_user_x8(x, ptr, __ret_pu) \ asm volatile("call __put_user_8" : "=a" (__ret_pu) \ : "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx") #else -#define __put_user_u64(x, ptr, retval) \ +#define __put_user_asm_u64(x, ptr, retval) \ __put_user_asm(x, ptr, retval, "q", "", "Zr", -EFAULT) +#define __put_user_asm_ex_u64(x, addr) \ + __put_user_asm_ex(x, addr, "q", "", "Zr") #define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu) #endif @@ -276,10 +286,31 @@ do { \ __put_user_asm(x, ptr, retval, "w", "w", "ir", errret); \ break; \ case 4: \ - __put_user_asm(x, ptr, retval, "l", "k", "ir", errret);\ + __put_user_asm(x, ptr, retval, "l", "k", "ir", errret); \ break; \ case 8: \ - __put_user_u64((__typeof__(*ptr))(x), ptr, retval); \ + __put_user_asm_u64((__typeof__(*ptr))(x), ptr, retval); \ + break; \ + default: \ + __put_user_bad(); \ + } \ +} while (0) + +#define __put_user_size_ex(x, ptr, size) \ +do { \ + __chk_user_ptr(ptr); \ + switch (size) { \ + case 1: \ + __put_user_asm_ex(x, ptr, "b", "b", "iq"); \ + break; \ + case 2: \ + __put_user_asm_ex(x, ptr, "w", "w", "ir"); \ + break; \ + case 4: \ + __put_user_asm_ex(x, ptr, "l", "k", "ir"); \ + break; \ + case 8: \ + __put_user_asm_ex_u64((__typeof__(*ptr))(x), ptr); \ break; \ default: \ __put_user_bad(); \ @@ -311,9 +342,12 @@ do { \ #ifdef CONFIG_X86_32 #define __get_user_asm_u64(x, ptr, retval, errret) (x) = __get_user_bad() +#define __get_user_asm_ex_u64(x, ptr) (x) = __get_user_bad() #else #define __get_user_asm_u64(x, ptr, retval, errret) \ __get_user_asm(x, ptr, retval, "q", "", "=r", errret) +#define __get_user_asm_ex_u64(x, ptr) \ + __get_user_asm_ex(x, ptr, "q", "", "=r") #endif #define __get_user_size(x, ptr, size, retval, errret) \ @@ -350,6 +384,33 @@ do { \ : "=r" (err), ltype(x) \ : "m" (__m(addr)), "i" (errret), "0" (err)) +#define __get_user_size_ex(x, ptr, size) \ +do { \ + __chk_user_ptr(ptr); \ + switch (size) { \ + case 1: \ + __get_user_asm_ex(x, ptr, "b", "b", "=q"); \ + break; \ + case 2: \ + __get_user_asm_ex(x, ptr, "w", "w", "=r"); \ + break; \ + case 4: \ + __get_user_asm_ex(x, ptr, "l", "k", "=r"); \ + break; \ + case 8: \ + __get_user_asm_ex_u64(x, ptr); \ + break; \ + default: \ + (x) = __get_user_bad(); \ + } \ +} while (0) + +#define __get_user_asm_ex(x, addr, itype, rtype, ltype) \ + asm volatile("1: mov"itype" %1,%"rtype"0\n" \ + "2:\n" \ + _ASM_EXTABLE(1b, 2b - 1b) \ + : ltype(x) : "m" (__m(addr))) + #define __put_user_nocheck(x, ptr, size) \ ({ \ int __pu_err; \ @@ -385,6 +446,26 @@ struct __large_struct { unsigned long buf[100]; }; _ASM_EXTABLE(1b, 3b) \ : "=r"(err) \ : ltype(x), "m" (__m(addr)), "i" (errret), "0" (err)) + +#define __put_user_asm_ex(x, addr, itype, rtype, ltype) \ + asm volatile("1: mov"itype" %"rtype"0,%1\n" \ + "2:\n" \ + _ASM_EXTABLE(1b, 2b - 1b) \ + : : ltype(x), "m" (__m(addr))) + +/* + * uaccess_try and catch + */ +#define uaccess_try do { \ + int prev_err = current_thread_info()->uaccess_err; \ + current_thread_info()->uaccess_err = 0; \ + barrier(); + +#define uaccess_catch(err) \ + (err) |= current_thread_info()->uaccess_err; \ + current_thread_info()->uaccess_err = prev_err; \ +} while (0) + /** * __get_user: - Get a simple variable from user space, with less checking. * @x: Variable to store result. @@ -408,6 +489,7 @@ struct __large_struct { unsigned long buf[100]; }; #define __get_user(x, ptr) \ __get_user_nocheck((x), (ptr), sizeof(*(ptr))) + /** * __put_user: - Write a simple value into user space, with less checking. * @x: Value to copy to user space. @@ -435,6 +517,27 @@ struct __large_struct { unsigned long buf[100]; }; #define __put_user_unaligned __put_user /* + * {get|put}_user_try and catch + * + * get_user_try { + * get_user_ex(...); + * } get_user_catch(err) + */ +#define get_user_try uaccess_try +#define get_user_catch(err) uaccess_catch(err) +#define put_user_try uaccess_try +#define put_user_catch(err) uaccess_catch(err) + +#define get_user_ex(x, ptr) do { \ + unsigned long __gue_val; \ + __get_user_size_ex((__gue_val), (ptr), (sizeof(*(ptr)))); \ + (x) = (__force __typeof__(*(ptr)))__gue_val; \ +} while (0) + +#define put_user_ex(x, ptr) \ + __put_user_size_ex((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr))) + +/* * movsl can be slow when source and dest are not both 8-byte aligned */ #ifdef CONFIG_X86_INTEL_USERCOPY diff --git a/arch/x86/include/asm/uv/uv.h b/arch/x86/include/asm/uv/uv.h new file mode 100644 index 00000000000..8ac1d7e312f --- /dev/null +++ b/arch/x86/include/asm/uv/uv.h @@ -0,0 +1,33 @@ +#ifndef _ASM_X86_UV_UV_H +#define _ASM_X86_UV_UV_H + +enum uv_system_type {UV_NONE, UV_LEGACY_APIC, UV_X2APIC, UV_NON_UNIQUE_APIC}; + +#ifdef CONFIG_X86_UV + +extern enum uv_system_type get_uv_system_type(void); +extern int is_uv_system(void); +extern void uv_cpu_init(void); +extern void uv_system_init(void); +extern int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip); +extern const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, + struct mm_struct *mm, + unsigned long va, + unsigned int cpu); + +#else /* X86_UV */ + +static inline enum uv_system_type get_uv_system_type(void) { return UV_NONE; } +static inline int is_uv_system(void) { return 0; } +static inline void uv_cpu_init(void) { } +static inline void uv_system_init(void) { } +static inline int uv_wakeup_secondary(int phys_apicid, unsigned int start_rip) +{ return 1; } +static inline const struct cpumask * +uv_flush_tlb_others(const struct cpumask *cpumask, struct mm_struct *mm, + unsigned long va, unsigned int cpu) +{ return cpumask; } + +#endif /* X86_UV */ + +#endif /* _ASM_X86_UV_UV_H */ diff --git a/arch/x86/include/asm/uv/uv_bau.h b/arch/x86/include/asm/uv/uv_bau.h index 50423c7b56b..9b0e61bf7a8 100644 --- a/arch/x86/include/asm/uv/uv_bau.h +++ b/arch/x86/include/asm/uv/uv_bau.h @@ -325,7 +325,6 @@ static inline void bau_cpubits_clear(struct bau_local_cpumask *dstp, int nbits) #define cpubit_isset(cpu, bau_local_cpumask) \ test_bit((cpu), (bau_local_cpumask).bits) -extern int uv_flush_tlb_others(cpumask_t *, struct mm_struct *, unsigned long); extern void uv_bau_message_intr1(void); extern void uv_bau_timeout_intr1(void); diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile index d364df03c1d..37fa30bada1 100644 --- a/arch/x86/kernel/Makefile +++ b/arch/x86/kernel/Makefile @@ -23,11 +23,12 @@ nostackp := $(call cc-option, -fno-stack-protector) CFLAGS_vsyscall_64.o := $(PROFILING) -g0 $(nostackp) CFLAGS_hpet.o := $(nostackp) CFLAGS_tsc.o := $(nostackp) +CFLAGS_paravirt.o := $(nostackp) obj-y := process_$(BITS).o signal.o entry_$(BITS).o obj-y += traps.o irq.o irq_$(BITS).o dumpstack_$(BITS).o obj-y += time_$(BITS).o ioport.o ldt.o dumpstack.o -obj-y += setup.o i8259.o irqinit_$(BITS).o setup_percpu.o +obj-y += setup.o i8259.o irqinit_$(BITS).o obj-$(CONFIG_X86_VISWS) += visws_quirks.o obj-$(CONFIG_X86_32) += probe_roms_32.o obj-$(CONFIG_X86_32) += sys_i386_32.o i386_ksyms_32.o @@ -57,9 +58,9 @@ obj-$(CONFIG_PCI) += early-quirks.o apm-y := apm_32.o obj-$(CONFIG_APM) += apm.o obj-$(CONFIG_X86_SMP) += smp.o -obj-$(CONFIG_X86_SMP) += smpboot.o tsc_sync.o ipi.o tlb_$(BITS).o -obj-$(CONFIG_X86_32_SMP) += smpcommon.o -obj-$(CONFIG_X86_64_SMP) += tsc_sync.o smpcommon.o +obj-$(CONFIG_X86_SMP) += smpboot.o tsc_sync.o ipi.o +obj-$(CONFIG_SMP) += setup_percpu.o +obj-$(CONFIG_X86_64_SMP) += tsc_sync.o obj-$(CONFIG_X86_TRAMPOLINE) += trampoline_$(BITS).o obj-$(CONFIG_X86_MPPARSE) += mpparse.o obj-$(CONFIG_X86_LOCAL_APIC) += apic.o nmi.o @@ -114,10 +115,11 @@ obj-$(CONFIG_SWIOTLB) += pci-swiotlb_64.o # NB rename without _64 ### # 64 bit specific files ifeq ($(CONFIG_X86_64),y) - obj-y += genapic_64.o genapic_flat_64.o genx2apic_uv_x.o tlb_uv.o - obj-y += bios_uv.o uv_irq.o uv_sysfs.o + obj-y += genapic_64.o genapic_flat_64.o obj-y += genx2apic_cluster.o obj-y += genx2apic_phys.o + obj-$(CONFIG_X86_UV) += genx2apic_uv_x.o tlb_uv.o + obj-$(CONFIG_X86_UV) += bios_uv.o uv_irq.o uv_sysfs.o obj-$(CONFIG_X86_PM_TIMER) += pmtimer_64.o obj-$(CONFIG_AUDIT) += audit_64.o diff --git a/arch/x86/kernel/acpi/boot.c b/arch/x86/kernel/acpi/boot.c index d37593c2f43..4cb5964f149 100644 --- a/arch/x86/kernel/acpi/boot.c +++ b/arch/x86/kernel/acpi/boot.c @@ -912,8 +912,8 @@ static u8 __init uniq_ioapic_id(u8 id) DECLARE_BITMAP(used, 256); bitmap_zero(used, 256); for (i = 0; i < nr_ioapics; i++) { - struct mp_config_ioapic *ia = &mp_ioapics[i]; - __set_bit(ia->mp_apicid, used); + struct mpc_ioapic *ia = &mp_ioapics[i]; + __set_bit(ia->apicid, used); } if (!test_bit(id, used)) return id; @@ -945,47 +945,47 @@ void __init mp_register_ioapic(int id, u32 address, u32 gsi_base) idx = nr_ioapics; - mp_ioapics[idx].mp_type = MP_IOAPIC; - mp_ioapics[idx].mp_flags = MPC_APIC_USABLE; - mp_ioapics[idx].mp_apicaddr = address; + mp_ioapics[idx].type = MP_IOAPIC; + mp_ioapics[idx].flags = MPC_APIC_USABLE; + mp_ioapics[idx].apicaddr = address; set_fixmap_nocache(FIX_IO_APIC_BASE_0 + idx, address); - mp_ioapics[idx].mp_apicid = uniq_ioapic_id(id); + mp_ioapics[idx].apicid = uniq_ioapic_id(id); #ifdef CONFIG_X86_32 - mp_ioapics[idx].mp_apicver = io_apic_get_version(idx); + mp_ioapics[idx].apicver = io_apic_get_version(idx); #else - mp_ioapics[idx].mp_apicver = 0; + mp_ioapics[idx].apicver = 0; #endif /* * Build basic GSI lookup table to facilitate gsi->io_apic lookups * and to prevent reprogramming of IOAPIC pins (PCI GSIs). */ - mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].mp_apicid; + mp_ioapic_routing[idx].apic_id = mp_ioapics[idx].apicid; mp_ioapic_routing[idx].gsi_base = gsi_base; mp_ioapic_routing[idx].gsi_end = gsi_base + io_apic_get_redir_entries(idx); - printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%lx, " - "GSI %d-%d\n", idx, mp_ioapics[idx].mp_apicid, - mp_ioapics[idx].mp_apicver, mp_ioapics[idx].mp_apicaddr, + printk(KERN_INFO "IOAPIC[%d]: apic_id %d, version %d, address 0x%x, " + "GSI %d-%d\n", idx, mp_ioapics[idx].apicid, + mp_ioapics[idx].apicver, mp_ioapics[idx].apicaddr, mp_ioapic_routing[idx].gsi_base, mp_ioapic_routing[idx].gsi_end); nr_ioapics++; } -static void assign_to_mp_irq(struct mp_config_intsrc *m, - struct mp_config_intsrc *mp_irq) +static void assign_to_mp_irq(struct mpc_intsrc *m, + struct mpc_intsrc *mp_irq) { - memcpy(mp_irq, m, sizeof(struct mp_config_intsrc)); + memcpy(mp_irq, m, sizeof(struct mpc_intsrc)); } -static int mp_irq_cmp(struct mp_config_intsrc *mp_irq, - struct mp_config_intsrc *m) +static int mp_irq_cmp(struct mpc_intsrc *mp_irq, + struct mpc_intsrc *m) { - return memcmp(mp_irq, m, sizeof(struct mp_config_intsrc)); + return memcmp(mp_irq, m, sizeof(struct mpc_intsrc)); } -static void save_mp_irq(struct mp_config_intsrc *m) +static void save_mp_irq(struct mpc_intsrc *m) { int i; @@ -1003,7 +1003,7 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) { int ioapic; int pin; - struct mp_config_intsrc mp_irq; + struct mpc_intsrc mp_irq; /* * Convert 'gsi' to 'ioapic.pin'. @@ -1021,13 +1021,13 @@ void __init mp_override_legacy_irq(u8 bus_irq, u8 polarity, u8 trigger, u32 gsi) if ((bus_irq == 0) && (trigger == 3)) trigger = 1; - mp_irq.mp_type = MP_INTSRC; - mp_irq.mp_irqtype = mp_INT; - mp_irq.mp_irqflag = (trigger << 2) | polarity; - mp_irq.mp_srcbus = MP_ISA_BUS; - mp_irq.mp_srcbusirq = bus_irq; /* IRQ */ - mp_irq.mp_dstapic = mp_ioapics[ioapic].mp_apicid; /* APIC ID */ - mp_irq.mp_dstirq = pin; /* INTIN# */ + mp_irq.type = MP_INTSRC; + mp_irq.irqtype = mp_INT; + mp_irq.irqflag = (trigger << 2) | polarity; + mp_irq.srcbus = MP_ISA_BUS; + mp_irq.srcbusirq = bus_irq; /* IRQ */ + mp_irq.dstapic = mp_ioapics[ioapic].apicid; /* APIC ID */ + mp_irq.dstirq = pin; /* INTIN# */ save_mp_irq(&mp_irq); } @@ -1037,7 +1037,7 @@ void __init mp_config_acpi_legacy_irqs(void) int i; int ioapic; unsigned int dstapic; - struct mp_config_intsrc mp_irq; + struct mpc_intsrc mp_irq; #if defined (CONFIG_MCA) || defined (CONFIG_EISA) /* @@ -1062,7 +1062,7 @@ void __init mp_config_acpi_legacy_irqs(void) ioapic = mp_find_ioapic(0); if (ioapic < 0) return; - dstapic = mp_ioapics[ioapic].mp_apicid; + dstapic = mp_ioapics[ioapic].apicid; /* * Use the default configuration for the IRQs 0-15. Unless @@ -1072,16 +1072,14 @@ void __init mp_config_acpi_legacy_irqs(void) int idx; for (idx = 0; idx < mp_irq_entries; idx++) { - struct mp_config_intsrc *irq = mp_irqs + idx; + struct mpc_intsrc *irq = mp_irqs + idx; /* Do we already have a mapping for this ISA IRQ? */ - if (irq->mp_srcbus == MP_ISA_BUS - && irq->mp_srcbusirq == i) + if (irq->srcbus == MP_ISA_BUS && irq->srcbusirq == i) break; /* Do we already have a mapping for this IOAPIC pin */ - if (irq->mp_dstapic == dstapic && - irq->mp_dstirq == i) + if (irq->dstapic == dstapic && irq->dstirq == i) break; } @@ -1090,13 +1088,13 @@ void __init mp_config_acpi_legacy_irqs(void) continue; /* IRQ already used */ } - mp_irq.mp_type = MP_INTSRC; - mp_irq.mp_irqflag = 0; /* Conforming */ - mp_irq.mp_srcbus = MP_ISA_BUS; - mp_irq.mp_dstapic = dstapic; - mp_irq.mp_irqtype = mp_INT; - mp_irq.mp_srcbusirq = i; /* Identity mapped */ - mp_irq.mp_dstirq = i; + mp_irq.type = MP_INTSRC; + mp_irq.irqflag = 0; /* Conforming */ + mp_irq.srcbus = MP_ISA_BUS; + mp_irq.dstapic = dstapic; + mp_irq.irqtype = mp_INT; + mp_irq.srcbusirq = i; /* Identity mapped */ + mp_irq.dstirq = i; save_mp_irq(&mp_irq); } @@ -1207,22 +1205,22 @@ int mp_config_acpi_gsi(unsigned char number, unsigned int devfn, u8 pin, u32 gsi, int triggering, int polarity) { #ifdef CONFIG_X86_MPPARSE - struct mp_config_intsrc mp_irq; + struct mpc_intsrc mp_irq; int ioapic; if (!acpi_ioapic) return 0; /* print the entry should happen on mptable identically */ - mp_irq.mp_type = MP_INTSRC; - mp_irq.mp_irqtype = mp_INT; - mp_irq.mp_irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) | + mp_irq.type = MP_INTSRC; + mp_irq.irqtype = mp_INT; + mp_irq.irqflag = (triggering == ACPI_EDGE_SENSITIVE ? 4 : 0x0c) | (polarity == ACPI_ACTIVE_HIGH ? 1 : 3); - mp_irq.mp_srcbus = number; - mp_irq.mp_srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3); + mp_irq.srcbus = number; + mp_irq.srcbusirq = (((devfn >> 3) & 0x1f) << 2) | ((pin - 1) & 3); ioapic = mp_find_ioapic(gsi); - mp_irq.mp_dstapic = mp_ioapic_routing[ioapic].apic_id; - mp_irq.mp_dstirq = gsi - mp_ioapic_routing[ioapic].gsi_base; + mp_irq.dstapic = mp_ioapic_routing[ioapic].apic_id; + mp_irq.dstirq = gsi - mp_ioapic_routing[ioapic].gsi_base; save_mp_irq(&mp_irq); #endif diff --git a/arch/x86/kernel/acpi/sleep.c b/arch/x86/kernel/acpi/sleep.c index 707c1f6f95f..4abff454c55 100644 --- a/arch/x86/kernel/acpi/sleep.c +++ b/arch/x86/kernel/acpi/sleep.c @@ -101,6 +101,7 @@ int acpi_save_state_mem(void) stack_start.sp = temp_stack + sizeof(temp_stack); early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(smp_processor_id()); + initial_gs = per_cpu_offset(smp_processor_id()); #endif initial_code = (unsigned long)wakeup_long64; saved_magic = 0x123456789abcdef0; diff --git a/arch/x86/kernel/apic.c b/arch/x86/kernel/apic.c index 0f830e4f567..c6f15647eba 100644 --- a/arch/x86/kernel/apic.c +++ b/arch/x86/kernel/apic.c @@ -60,6 +60,24 @@ # error SPURIOUS_APIC_VECTOR definition error #endif +unsigned int num_processors; +unsigned disabled_cpus __cpuinitdata; +/* Processor that is doing the boot up */ +unsigned int boot_cpu_physical_apicid = -1U; +EXPORT_SYMBOL(boot_cpu_physical_apicid); +unsigned int max_physical_apicid; + +/* Bitmask of physically existing CPUs */ +physid_mask_t phys_cpu_present_map; + +/* + * Map cpu index to physical APIC ID + */ +DEFINE_EARLY_PER_CPU(u16, x86_cpu_to_apicid, BAD_APICID); +DEFINE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid, BAD_APICID); +EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid); +EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid); + #ifdef CONFIG_X86_32 /* * Knob to control our willingness to enable the local APIC. @@ -895,6 +913,10 @@ void disable_local_APIC(void) { unsigned int value; + /* APIC hasn't been mapped yet */ + if (!apic_phys) + return; + clear_local_APIC(); /* @@ -1126,6 +1148,13 @@ void __cpuinit setup_local_APIC(void) unsigned int value; int i, j; + if (disable_apic) { +#ifdef CONFIG_X86_IO_APIC + disable_ioapic_setup(); +#endif + return; + } + #ifdef CONFIG_X86_32 /* Pound the ESR really hard over the head with a big hammer - mbligh */ if (lapic_is_integrated() && esr_disable) { @@ -1566,11 +1595,11 @@ int apic_version[MAX_APICS]; int __init APIC_init_uniprocessor(void) { -#ifdef CONFIG_X86_64 if (disable_apic) { pr_info("Apic disabled\n"); return -1; } +#ifdef CONFIG_X86_64 if (!cpu_has_apic) { disable_apic = 1; pr_info("Apic disabled by BIOS\n"); @@ -1833,6 +1862,11 @@ void __cpuinit generic_processor_info(int apicid, int version) num_processors++; cpu = cpumask_next_zero(-1, cpu_present_mask); + if (version != apic_version[boot_cpu_physical_apicid]) + WARN_ONCE(1, + "ACPI: apic version mismatch, bootcpu: %x cpu %d: %x\n", + apic_version[boot_cpu_physical_apicid], cpu, version); + physid_set(apicid, phys_cpu_present_map); if (apicid == boot_cpu_physical_apicid) { /* @@ -1868,17 +1902,8 @@ void __cpuinit generic_processor_info(int apicid, int version) #endif #if defined(CONFIG_X86_SMP) || defined(CONFIG_X86_64) - /* are we being called early in kernel startup? */ - if (early_per_cpu_ptr(x86_cpu_to_apicid)) { - u16 *cpu_to_apicid = early_per_cpu_ptr(x86_cpu_to_apicid); - u16 *bios_cpu_apicid = early_per_cpu_ptr(x86_bios_cpu_apicid); - - cpu_to_apicid[cpu] = apicid; - bios_cpu_apicid[cpu] = apicid; - } else { - per_cpu(x86_cpu_to_apicid, cpu) = apicid; - per_cpu(x86_bios_cpu_apicid, cpu) = apicid; - } + early_per_cpu(x86_cpu_to_apicid, cpu) = apicid; + early_per_cpu(x86_bios_cpu_apicid, cpu) = apicid; #endif set_cpu_possible(cpu, true); diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c index 1d41d3f1edb..8793ab33e2c 100644 --- a/arch/x86/kernel/asm-offsets_64.c +++ b/arch/x86/kernel/asm-offsets_64.c @@ -11,7 +11,6 @@ #include <linux/hardirq.h> #include <linux/suspend.h> #include <linux/kbuild.h> -#include <asm/pda.h> #include <asm/processor.h> #include <asm/segment.h> #include <asm/thread_info.h> @@ -48,16 +47,6 @@ int main(void) #endif BLANK(); #undef ENTRY -#define ENTRY(entry) DEFINE(pda_ ## entry, offsetof(struct x8664_pda, entry)) - ENTRY(kernelstack); - ENTRY(oldrsp); - ENTRY(pcurrent); - ENTRY(irqcount); - ENTRY(cpunumber); - ENTRY(irqstackptr); - ENTRY(data_offset); - BLANK(); -#undef ENTRY #ifdef CONFIG_PARAVIRT BLANK(); OFFSET(PARAVIRT_enabled, pv_info, paravirt_enabled); diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c index 2cf23634b6d..4e581fdc0a5 100644 --- a/arch/x86/kernel/cpu/addon_cpuid_features.c +++ b/arch/x86/kernel/cpu/addon_cpuid_features.c @@ -143,37 +143,3 @@ void __cpuinit detect_extended_topology(struct cpuinfo_x86 *c) return; #endif } - -#ifdef CONFIG_X86_PAT -void __cpuinit validate_pat_support(struct cpuinfo_x86 *c) -{ - if (!cpu_has_pat) - pat_disable("PAT not supported by CPU."); - - switch (c->x86_vendor) { - case X86_VENDOR_INTEL: - /* - * There is a known erratum on Pentium III and Core Solo - * and Core Duo CPUs. - * " Page with PAT set to WC while associated MTRR is UC - * may consolidate to UC " - * Because of this erratum, it is better to stick with - * setting WC in MTRR rather than using PAT on these CPUs. - * - * Enable PAT WC only on P4, Core 2 or later CPUs. - */ - if (c->x86 > 0x6 || (c->x86 == 6 && c->x86_model >= 15)) - return; - - pat_disable("PAT WC disabled due to known CPU erratum."); - return; - - case X86_VENDOR_AMD: - case X86_VENDOR_CENTAUR: - case X86_VENDOR_TRANSMETA: - return; - } - - pat_disable("PAT disabled. Not yet verified on this CPU type."); -} -#endif diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index 83492b1f93b..275e2cb43b9 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -21,14 +21,16 @@ #include <asm/asm.h> #include <asm/numa.h> #include <asm/smp.h> +#include <asm/cpu.h> +#include <asm/cpumask.h> #ifdef CONFIG_X86_LOCAL_APIC #include <asm/mpspec.h> #include <asm/apic.h> #include <mach_apic.h> #include <asm/genapic.h> +#include <asm/uv/uv.h> #endif -#include <asm/pda.h> #include <asm/pgtable.h> #include <asm/processor.h> #include <asm/desc.h> @@ -50,6 +52,15 @@ cpumask_var_t cpu_initialized_mask; /* representing cpus for which sibling maps can be computed */ cpumask_var_t cpu_sibling_setup_mask; +/* correctly size the local cpu masks */ +void __init setup_cpu_local_masks(void) +{ + alloc_bootmem_cpumask_var(&cpu_initialized_mask); + alloc_bootmem_cpumask_var(&cpu_callin_mask); + alloc_bootmem_cpumask_var(&cpu_callout_mask); + alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask); +} + #else /* CONFIG_X86_32 */ cpumask_t cpu_callin_map; @@ -62,23 +73,23 @@ cpumask_t cpu_sibling_setup_map; static struct cpu_dev *this_cpu __cpuinitdata; +DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = { #ifdef CONFIG_X86_64 -/* We need valid kernel segments for data and code in long mode too - * IRET will check the segment types kkeil 2000/10/28 - * Also sysret mandates a special GDT layout - */ -/* The TLS descriptors are currently at a different place compared to i386. - Hopefully nobody expects them at a fixed place (Wine?) */ -DEFINE_PER_CPU(struct gdt_page, gdt_page) = { .gdt = { + /* + * We need valid kernel segments for data and code in long mode too + * IRET will check the segment types kkeil 2000/10/28 + * Also sysret mandates a special GDT layout + * + * The TLS descriptors are currently at a different place compared to i386. + * Hopefully nobody expects them at a fixed place (Wine?) + */ [GDT_ENTRY_KERNEL32_CS] = { { { 0x0000ffff, 0x00cf9b00 } } }, [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00af9b00 } } }, [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9300 } } }, [GDT_ENTRY_DEFAULT_USER32_CS] = { { { 0x0000ffff, 0x00cffb00 } } }, [GDT_ENTRY_DEFAULT_USER_DS] = { { { 0x0000ffff, 0x00cff300 } } }, [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00affb00 } } }, -} }; #else -DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = { [GDT_ENTRY_KERNEL_CS] = { { { 0x0000ffff, 0x00cf9a00 } } }, [GDT_ENTRY_KERNEL_DS] = { { { 0x0000ffff, 0x00cf9200 } } }, [GDT_ENTRY_DEFAULT_USER_CS] = { { { 0x0000ffff, 0x00cffa00 } } }, @@ -110,9 +121,9 @@ DEFINE_PER_CPU_PAGE_ALIGNED(struct gdt_page, gdt_page) = { .gdt = { [GDT_ENTRY_APMBIOS_BASE+2] = { { { 0x0000ffff, 0x00409200 } } }, [GDT_ENTRY_ESPFIX_SS] = { { { 0x00000000, 0x00c09200 } } }, - [GDT_ENTRY_PERCPU] = { { { 0x00000000, 0x00000000 } } }, -} }; + [GDT_ENTRY_PERCPU] = { { { 0x0000ffff, 0x00cf9200 } } }, #endif +} }; EXPORT_PER_CPU_SYMBOL_GPL(gdt_page); #ifdef CONFIG_X86_32 @@ -213,6 +224,49 @@ static inline void squash_the_stupid_serial_number(struct cpuinfo_x86 *c) #endif /* + * Some CPU features depend on higher CPUID levels, which may not always + * be available due to CPUID level capping or broken virtualization + * software. Add those features to this table to auto-disable them. + */ +struct cpuid_dependent_feature { + u32 feature; + u32 level; +}; +static const struct cpuid_dependent_feature __cpuinitconst +cpuid_dependent_features[] = { + { X86_FEATURE_MWAIT, 0x00000005 }, + { X86_FEATURE_DCA, 0x00000009 }, + { X86_FEATURE_XSAVE, 0x0000000d }, + { 0, 0 } +}; + +static void __cpuinit filter_cpuid_features(struct cpuinfo_x86 *c, bool warn) +{ + const struct cpuid_dependent_feature *df; + for (df = cpuid_dependent_features; df->feature; df++) { + /* + * Note: cpuid_level is set to -1 if unavailable, but + * extended_extended_level is set to 0 if unavailable + * and the legitimate extended levels are all negative + * when signed; hence the weird messing around with + * signs here... + */ + if (cpu_has(c, df->feature) && + ((s32)df->feature < 0 ? + (u32)df->feature > (u32)c->extended_cpuid_level : + (s32)df->feature > (s32)c->cpuid_level)) { + clear_cpu_cap(c, df->feature); + if (warn) + printk(KERN_WARNING + "CPU: CPU feature %s disabled " + "due to lack of CPUID level 0x%x\n", + x86_cap_flags[df->feature], + df->level); + } + } +} + +/* * Naming convention should be: <Name> [(<Codename>)] * This table only is used unless init_<vendor>() below doesn't set it; * in particular, if CPUID levels 0x80000002..4 are supported, this isn't used @@ -247,12 +301,17 @@ __u32 cleared_cpu_caps[NCAPINTS] __cpuinitdata; void switch_to_new_gdt(void) { struct desc_ptr gdt_descr; + int cpu = smp_processor_id(); - gdt_descr.address = (long)get_cpu_gdt_table(smp_processor_id()); + gdt_descr.address = (long)get_cpu_gdt_table(cpu); gdt_descr.size = GDT_SIZE - 1; load_gdt(&gdt_descr); + /* Reload the per-cpu base */ #ifdef CONFIG_X86_32 - asm("mov %0, %%fs" : : "r" (__KERNEL_PERCPU) : "memory"); + loadsegment(fs, __KERNEL_PERCPU); +#else + loadsegment(gs, 0); + wrmsrl(MSR_GS_BASE, (unsigned long)per_cpu(irq_stack_union.gs_base, cpu)); #endif } @@ -570,11 +629,10 @@ static void __init early_identify_cpu(struct cpuinfo_x86 *c) if (this_cpu->c_early_init) this_cpu->c_early_init(c); - validate_pat_support(c); - #ifdef CONFIG_SMP c->cpu_index = boot_cpu_id; #endif + filter_cpuid_features(c, false); } void __init early_cpu_init(void) @@ -708,6 +766,9 @@ static void __cpuinit identify_cpu(struct cpuinfo_x86 *c) * we do "generic changes." */ + /* Filter out anything that depends on CPUID levels we don't have */ + filter_cpuid_features(c, true); + /* If the model name is still unset, do table lookup. */ if (!c->x86_model_id[0]) { char *p; @@ -877,54 +938,26 @@ static __init int setup_disablecpuid(char *arg) __setup("clearcpuid=", setup_disablecpuid); #ifdef CONFIG_X86_64 -struct x8664_pda **_cpu_pda __read_mostly; -EXPORT_SYMBOL(_cpu_pda); - struct desc_ptr idt_descr = { 256 * 16 - 1, (unsigned long) idt_table }; -static char boot_cpu_stack[IRQSTACKSIZE] __page_aligned_bss; - -void __cpuinit pda_init(int cpu) -{ - struct x8664_pda *pda = cpu_pda(cpu); +DEFINE_PER_CPU_FIRST(union irq_stack_union, + irq_stack_union) __aligned(PAGE_SIZE); +#ifdef CONFIG_SMP +DEFINE_PER_CPU(char *, irq_stack_ptr); /* will be set during per cpu init */ +#else +DEFINE_PER_CPU(char *, irq_stack_ptr) = + per_cpu_var(irq_stack_union.irq_stack) + IRQ_STACK_SIZE - 64; +#endif - /* Setup up data that may be needed in __get_free_pages early */ - loadsegment(fs, 0); - loadsegment(gs, 0); - /* Memory clobbers used to order PDA accessed */ - mb(); - wrmsrl(MSR_GS_BASE, pda); - mb(); - - pda->cpunumber = cpu; - pda->irqcount = -1; - pda->kernelstack = (unsigned long)stack_thread_info() - - PDA_STACKOFFSET + THREAD_SIZE; - pda->active_mm = &init_mm; - pda->mmu_state = 0; - - if (cpu == 0) { - /* others are initialized in smpboot.c */ - pda->pcurrent = &init_task; - pda->irqstackptr = boot_cpu_stack; - pda->irqstackptr += IRQSTACKSIZE - 64; - } else { - if (!pda->irqstackptr) { - pda->irqstackptr = (char *) - __get_free_pages(GFP_ATOMIC, IRQSTACK_ORDER); - if (!pda->irqstackptr) - panic("cannot allocate irqstack for cpu %d", - cpu); - pda->irqstackptr += IRQSTACKSIZE - 64; - } +DEFINE_PER_CPU(unsigned long, kernel_stack) = + (unsigned long)&init_thread_union - KERNEL_STACK_OFFSET + THREAD_SIZE; +EXPORT_PER_CPU_SYMBOL(kernel_stack); - if (pda->nodenumber == 0 && cpu_to_node(cpu) != NUMA_NO_NODE) - pda->nodenumber = cpu_to_node(cpu); - } -} +DEFINE_PER_CPU(unsigned int, irq_count) = -1; -static char boot_exception_stacks[(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + - DEBUG_STKSZ] __page_aligned_bss; +static DEFINE_PER_CPU_PAGE_ALIGNED(char, exception_stacks + [(N_EXCEPTION_STACKS - 1) * EXCEPTION_STKSZ + DEBUG_STKSZ]) + __aligned(PAGE_SIZE); extern asmlinkage void ignore_sysret(void); @@ -982,15 +1015,14 @@ void __cpuinit cpu_init(void) struct tss_struct *t = &per_cpu(init_tss, cpu); struct orig_ist *orig_ist = &per_cpu(orig_ist, cpu); unsigned long v; - char *estacks = NULL; struct task_struct *me; int i; - /* CPU 0 is initialised in head64.c */ - if (cpu != 0) - pda_init(cpu); - else - estacks = boot_exception_stacks; +#ifdef CONFIG_NUMA + if (cpu != 0 && percpu_read(node_number) == 0 && + cpu_to_node(cpu) != NUMA_NO_NODE) + percpu_write(node_number, cpu_to_node(cpu)); +#endif me = current; @@ -1007,6 +1039,8 @@ void __cpuinit cpu_init(void) */ switch_to_new_gdt(); + loadsegment(fs, 0); + load_idt((const struct desc_ptr *)&idt_descr); memset(me->thread.tls_array, 0, GDT_ENTRY_TLS_ENTRIES * 8); @@ -1024,18 +1058,13 @@ void __cpuinit cpu_init(void) * set up and load the per-CPU TSS */ if (!orig_ist->ist[0]) { - static const unsigned int order[N_EXCEPTION_STACKS] = { - [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STACK_ORDER, - [DEBUG_STACK - 1] = DEBUG_STACK_ORDER + static const unsigned int sizes[N_EXCEPTION_STACKS] = { + [0 ... N_EXCEPTION_STACKS - 1] = EXCEPTION_STKSZ, + [DEBUG_STACK - 1] = DEBUG_STKSZ }; + char *estacks = per_cpu(exception_stacks, cpu); for (v = 0; v < N_EXCEPTION_STACKS; v++) { - if (cpu) { - estacks = (char *)__get_free_pages(GFP_ATOMIC, order[v]); - if (!estacks) - panic("Cannot allocate exception " - "stack %ld %d\n", v, cpu); - } - estacks += PAGE_SIZE << order[v]; + estacks += sizes[v]; orig_ist->ist[v] = t->x86_tss.ist[v] = (unsigned long)estacks; } @@ -1069,22 +1098,19 @@ void __cpuinit cpu_init(void) */ if (kgdb_connected && arch_kgdb_ops.correct_hw_break) arch_kgdb_ops.correct_hw_break(); - else { + else #endif - /* - * Clear all 6 debug registers: - */ - - set_debugreg(0UL, 0); - set_debugreg(0UL, 1); - set_debugreg(0UL, 2); - set_debugreg(0UL, 3); - set_debugreg(0UL, 6); - set_debugreg(0UL, 7); -#ifdef CONFIG_KGDB - /* If the kgdb is connected no debug regs should be altered. */ + { + /* + * Clear all 6 debug registers: + */ + set_debugreg(0UL, 0); + set_debugreg(0UL, 1); + set_debugreg(0UL, 2); + set_debugreg(0UL, 3); + set_debugreg(0UL, 6); + set_debugreg(0UL, 7); } -#endif fpu_init(); diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 6f11e029e8c..4b1c319d30c 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -145,13 +145,14 @@ typedef union { struct drv_cmd { unsigned int type; - cpumask_var_t mask; + const struct cpumask *mask; drv_addr_union addr; u32 val; }; -static void do_drv_read(struct drv_cmd *cmd) +static long do_drv_read(void *_cmd) { + struct drv_cmd *cmd = _cmd; u32 h; switch (cmd->type) { @@ -166,10 +167,12 @@ static void do_drv_read(struct drv_cmd *cmd) default: break; } + return 0; } -static void do_drv_write(struct drv_cmd *cmd) +static long do_drv_write(void *_cmd) { + struct drv_cmd *cmd = _cmd; u32 lo, hi; switch (cmd->type) { @@ -186,30 +189,23 @@ static void do_drv_write(struct drv_cmd *cmd) default: break; } + return 0; } static void drv_read(struct drv_cmd *cmd) { - cpumask_t saved_mask = current->cpus_allowed; cmd->val = 0; - set_cpus_allowed_ptr(current, cmd->mask); - do_drv_read(cmd); - set_cpus_allowed_ptr(current, &saved_mask); + work_on_cpu(cpumask_any(cmd->mask), do_drv_read, cmd); } static void drv_write(struct drv_cmd *cmd) { - cpumask_t saved_mask = current->cpus_allowed; unsigned int i; for_each_cpu(i, cmd->mask) { - set_cpus_allowed_ptr(current, cpumask_of(i)); - do_drv_write(cmd); + work_on_cpu(i, do_drv_write, cmd); } - - set_cpus_allowed_ptr(current, &saved_mask); - return; } static u32 get_cur_val(const struct cpumask *mask) @@ -235,8 +231,7 @@ static u32 get_cur_val(const struct cpumask *mask) return 0; } - cpumask_copy(cmd.mask, mask); - + cmd.mask = mask; drv_read(&cmd); dprintk("get_cur_val = %u\n", cmd.val); @@ -368,7 +363,7 @@ static unsigned int get_cur_freq_on_cpu(unsigned int cpu) return freq; } -static unsigned int check_freqs(const cpumask_t *mask, unsigned int freq, +static unsigned int check_freqs(const struct cpumask *mask, unsigned int freq, struct acpi_cpufreq_data *data) { unsigned int cur_freq; @@ -403,9 +398,6 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, return -ENODEV; } - if (unlikely(!alloc_cpumask_var(&cmd.mask, GFP_KERNEL))) - return -ENOMEM; - perf = data->acpi_data; result = cpufreq_frequency_table_target(policy, data->freq_table, @@ -450,9 +442,9 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, /* cpufreq holds the hotplug lock, so we are safe from here on */ if (policy->shared_type != CPUFREQ_SHARED_TYPE_ANY) - cpumask_and(cmd.mask, cpu_online_mask, policy->cpus); + cmd.mask = policy->cpus; else - cpumask_copy(cmd.mask, cpumask_of(policy->cpu)); + cmd.mask = cpumask_of(policy->cpu); freqs.old = perf->states[perf->state].core_frequency * 1000; freqs.new = data->freq_table[next_state].frequency; @@ -479,7 +471,6 @@ static int acpi_cpufreq_target(struct cpufreq_policy *policy, perf->state = next_perf_state; out: - free_cpumask_var(cmd.mask); return result; } diff --git a/arch/x86/kernel/cpu/intel.c b/arch/x86/kernel/cpu/intel.c index 8ea6929e974..5deefae9064 100644 --- a/arch/x86/kernel/cpu/intel.c +++ b/arch/x86/kernel/cpu/intel.c @@ -29,6 +29,19 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) { + /* Unmask CPUID levels if masked: */ + if (c->x86 > 6 || (c->x86 == 6 && c->x86_model >= 0xd)) { + u64 misc_enable; + + rdmsrl(MSR_IA32_MISC_ENABLE, misc_enable); + + if (misc_enable & MSR_IA32_MISC_ENABLE_LIMIT_CPUID) { + misc_enable &= ~MSR_IA32_MISC_ENABLE_LIMIT_CPUID; + wrmsrl(MSR_IA32_MISC_ENABLE, misc_enable); + c->cpuid_level = cpuid_eax(0); + } + } + if ((c->x86 == 0xf && c->x86_model >= 0x03) || (c->x86 == 0x6 && c->x86_model >= 0x0e)) set_cpu_cap(c, X86_FEATURE_CONSTANT_TSC); @@ -50,6 +63,18 @@ static void __cpuinit early_init_intel(struct cpuinfo_x86 *c) set_cpu_cap(c, X86_FEATURE_NONSTOP_TSC); } + /* + * There is a known erratum on Pentium III and Core Solo + * and Core Duo CPUs. + * " Page with PAT set to WC while associated MTRR is UC + * may consolidate to UC " + * Because of this erratum, it is better to stick with + * setting WC in MTRR rather than using PAT on these CPUs. + * + * Enable PAT WC only on P4, Core 2 or later CPUs. + */ + if (c->x86 == 6 && c->x86_model < 15) + clear_cpu_cap(c, X86_FEATURE_PAT); } #ifdef CONFIG_X86_32 diff --git a/arch/x86/kernel/cpu/intel_cacheinfo.c b/arch/x86/kernel/cpu/intel_cacheinfo.c index 48533d77be7..58527a9fc40 100644 --- a/arch/x86/kernel/cpu/intel_cacheinfo.c +++ b/arch/x86/kernel/cpu/intel_cacheinfo.c @@ -132,7 +132,16 @@ struct _cpuid4_info { union _cpuid4_leaf_ecx ecx; unsigned long size; unsigned long can_disable; - cpumask_t shared_cpu_map; /* future?: only cpus/node is needed */ + DECLARE_BITMAP(shared_cpu_map, NR_CPUS); +}; + +/* subset of above _cpuid4_info w/o shared_cpu_map */ +struct _cpuid4_info_regs { + union _cpuid4_leaf_eax eax; + union _cpuid4_leaf_ebx ebx; + union _cpuid4_leaf_ecx ecx; + unsigned long size; + unsigned long can_disable; }; #ifdef CONFIG_PCI @@ -263,7 +272,7 @@ amd_cpuid4(int leaf, union _cpuid4_leaf_eax *eax, } static void __cpuinit -amd_check_l3_disable(int index, struct _cpuid4_info *this_leaf) +amd_check_l3_disable(int index, struct _cpuid4_info_regs *this_leaf) { if (index < 3) return; @@ -271,7 +280,8 @@ amd_check_l3_disable(int index, struct _cpuid4_info *this_leaf) } static int -__cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf) +__cpuinit cpuid4_cache_lookup_regs(int index, + struct _cpuid4_info_regs *this_leaf) { union _cpuid4_leaf_eax eax; union _cpuid4_leaf_ebx ebx; @@ -299,6 +309,15 @@ __cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf) return 0; } +static int +__cpuinit cpuid4_cache_lookup(int index, struct _cpuid4_info *this_leaf) +{ + struct _cpuid4_info_regs *leaf_regs = + (struct _cpuid4_info_regs *)this_leaf; + + return cpuid4_cache_lookup_regs(index, leaf_regs); +} + static int __cpuinit find_num_cache_leaves(void) { unsigned int eax, ebx, ecx, edx; @@ -338,11 +357,10 @@ unsigned int __cpuinit init_intel_cacheinfo(struct cpuinfo_x86 *c) * parameters cpuid leaf to find the cache details */ for (i = 0; i < num_cache_leaves; i++) { - struct _cpuid4_info this_leaf; - + struct _cpuid4_info_regs this_leaf; int retval; - retval = cpuid4_cache_lookup(i, &this_leaf); + retval = cpuid4_cache_lookup_regs(i, &this_leaf); if (retval >= 0) { switch(this_leaf.eax.split.level) { case 1: @@ -491,17 +509,20 @@ static void __cpuinit cache_shared_cpu_map_setup(unsigned int cpu, int index) num_threads_sharing = 1 + this_leaf->eax.split.num_threads_sharing; if (num_threads_sharing == 1) - cpu_set(cpu, this_leaf->shared_cpu_map); + cpumask_set_cpu(cpu, to_cpumask(this_leaf->shared_cpu_map)); else { index_msb = get_count_order(num_threads_sharing); for_each_online_cpu(i) { if (cpu_data(i).apicid >> index_msb == c->apicid >> index_msb) { - cpu_set(i, this_leaf->shared_cpu_map); + cpumask_set_cpu(i, + to_cpumask(this_leaf->shared_cpu_map)); if (i != cpu && per_cpu(cpuid4_info, i)) { - sibling_leaf = CPUID4_INFO_IDX(i, index); - cpu_set(cpu, sibling_leaf->shared_cpu_map); + sibling_leaf = + CPUID4_INFO_IDX(i, index); + cpumask_set_cpu(cpu, to_cpumask( + sibling_leaf->shared_cpu_map)); } } } @@ -513,9 +534,10 @@ static void __cpuinit cache_remove_shared_cpu_map(unsigned int cpu, int index) int sibling; this_leaf = CPUID4_INFO_IDX(cpu, index); - for_each_cpu_mask_nr(sibling, this_leaf->shared_cpu_map) { + for_each_cpu(sibling, to_cpumask(this_leaf->shared_cpu_map)) { sibling_leaf = CPUID4_INFO_IDX(sibling, index); - cpu_clear(cpu, sibling_leaf->shared_cpu_map); + cpumask_clear_cpu(cpu, + to_cpumask(sibling_leaf->shared_cpu_map)); } } #else @@ -620,8 +642,9 @@ static ssize_t show_shared_cpu_map_func(struct _cpuid4_info *this_leaf, int n = 0; if (len > 1) { - cpumask_t *mask = &this_leaf->shared_cpu_map; + const struct cpumask *mask; + mask = to_cpumask(this_leaf->shared_cpu_map); n = type? cpulist_scnprintf(buf, len-2, mask) : cpumask_scnprintf(buf, len-2, mask); @@ -684,7 +707,8 @@ static struct pci_dev *get_k8_northbridge(int node) static ssize_t show_cache_disable(struct _cpuid4_info *this_leaf, char *buf) { - int node = cpu_to_node(first_cpu(this_leaf->shared_cpu_map)); + const struct cpumask *mask = to_cpumask(this_leaf->shared_cpu_map); + int node = cpu_to_node(cpumask_first(mask)); struct pci_dev *dev = NULL; ssize_t ret = 0; int i; @@ -718,7 +742,8 @@ static ssize_t store_cache_disable(struct _cpuid4_info *this_leaf, const char *buf, size_t count) { - int node = cpu_to_node(first_cpu(this_leaf->shared_cpu_map)); + const struct cpumask *mask = to_cpumask(this_leaf->shared_cpu_map); + int node = cpu_to_node(cpumask_first(mask)); struct pci_dev *dev = NULL; unsigned int ret, index, val; @@ -863,7 +888,7 @@ err_out: return -ENOMEM; } -static cpumask_t cache_dev_map = CPU_MASK_NONE; +static DECLARE_BITMAP(cache_dev_map, NR_CPUS); /* Add/Remove cache interface for CPU device */ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) @@ -903,7 +928,7 @@ static int __cpuinit cache_add_dev(struct sys_device * sys_dev) } kobject_uevent(&(this_object->kobj), KOBJ_ADD); } - cpu_set(cpu, cache_dev_map); + cpumask_set_cpu(cpu, to_cpumask(cache_dev_map)); kobject_uevent(per_cpu(cache_kobject, cpu), KOBJ_ADD); return 0; @@ -916,9 +941,9 @@ static void __cpuinit cache_remove_dev(struct sys_device * sys_dev) if (per_cpu(cpuid4_info, cpu) == NULL) return; - if (!cpu_isset(cpu, cache_dev_map)) + if (!cpumask_test_cpu(cpu, to_cpumask(cache_dev_map))) return; - cpu_clear(cpu, cache_dev_map); + cpumask_clear_cpu(cpu, to_cpumask(cache_dev_map)); for (i = 0; i < num_cache_leaves; i++) kobject_put(&(INDEX_KOBJECT_PTR(cpu,i)->kobj)); diff --git a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c index 8ae8c4ff094..4772e91e824 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_amd_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_amd_64.c @@ -67,7 +67,7 @@ static struct threshold_block threshold_defaults = { struct threshold_bank { struct kobject *kobj; struct threshold_block *blocks; - cpumask_t cpus; + cpumask_var_t cpus; }; static DEFINE_PER_CPU(struct threshold_bank *, threshold_banks[NR_BANKS]); @@ -481,7 +481,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) #ifdef CONFIG_SMP if (cpu_data(cpu).cpu_core_id && shared_bank[bank]) { /* symlink */ - i = first_cpu(per_cpu(cpu_core_map, cpu)); + i = cpumask_first(&per_cpu(cpu_core_map, cpu)); /* first core not up yet */ if (cpu_data(i).cpu_core_id) @@ -501,7 +501,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) if (err) goto out; - b->cpus = per_cpu(cpu_core_map, cpu); + cpumask_copy(b->cpus, &per_cpu(cpu_core_map, cpu)); per_cpu(threshold_banks, cpu)[bank] = b; goto out; } @@ -512,15 +512,20 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) err = -ENOMEM; goto out; } + if (!alloc_cpumask_var(&b->cpus, GFP_KERNEL)) { + kfree(b); + err = -ENOMEM; + goto out; + } b->kobj = kobject_create_and_add(name, &per_cpu(device_mce, cpu).kobj); if (!b->kobj) goto out_free; #ifndef CONFIG_SMP - b->cpus = CPU_MASK_ALL; + cpumask_setall(b->cpus); #else - b->cpus = per_cpu(cpu_core_map, cpu); + cpumask_copy(b->cpus, &per_cpu(cpu_core_map, cpu)); #endif per_cpu(threshold_banks, cpu)[bank] = b; @@ -529,7 +534,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) if (err) goto out_free; - for_each_cpu_mask_nr(i, b->cpus) { + for_each_cpu(i, b->cpus) { if (i == cpu) continue; @@ -545,6 +550,7 @@ static __cpuinit int threshold_create_bank(unsigned int cpu, unsigned int bank) out_free: per_cpu(threshold_banks, cpu)[bank] = NULL; + free_cpumask_var(b->cpus); kfree(b); out: return err; @@ -619,7 +625,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank) #endif /* remove all sibling symlinks before unregistering */ - for_each_cpu_mask_nr(i, b->cpus) { + for_each_cpu(i, b->cpus) { if (i == cpu) continue; @@ -632,6 +638,7 @@ static void threshold_remove_bank(unsigned int cpu, int bank) free_out: kobject_del(b->kobj); kobject_put(b->kobj); + free_cpumask_var(b->cpus); kfree(b); per_cpu(threshold_banks, cpu)[bank] = NULL; } diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c index 4b48f251fd3..5e8c79e748a 100644 --- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c +++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c @@ -7,6 +7,7 @@ #include <linux/interrupt.h> #include <linux/percpu.h> #include <asm/processor.h> +#include <asm/apic.h> #include <asm/msr.h> #include <asm/mce.h> #include <asm/hw_irq.h> diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c index b59ddcc88cd..0c0a455fe95 100644 --- a/arch/x86/kernel/cpu/mtrr/generic.c +++ b/arch/x86/kernel/cpu/mtrr/generic.c @@ -33,11 +33,13 @@ u64 mtrr_tom2; struct mtrr_state_type mtrr_state = {}; EXPORT_SYMBOL_GPL(mtrr_state); -#undef MODULE_PARAM_PREFIX -#define MODULE_PARAM_PREFIX "mtrr." - -static int mtrr_show; -module_param_named(show, mtrr_show, bool, 0); +static int __initdata mtrr_show; +static int __init mtrr_debug(char *opt) +{ + mtrr_show = 1; + return 0; +} +early_param("mtrr.show", mtrr_debug); /* * Returns the effective MTRR type for the region diff --git a/arch/x86/kernel/crash.c b/arch/x86/kernel/crash.c index c689d19e35a..11b93cabdf7 100644 --- a/arch/x86/kernel/crash.c +++ b/arch/x86/kernel/crash.c @@ -24,7 +24,7 @@ #include <asm/apic.h> #include <asm/hpet.h> #include <linux/kdebug.h> -#include <asm/smp.h> +#include <asm/cpu.h> #include <asm/reboot.h> #include <asm/virtext.h> diff --git a/arch/x86/kernel/dumpstack_64.c b/arch/x86/kernel/dumpstack_64.c index c302d070704..d35db5993fd 100644 --- a/arch/x86/kernel/dumpstack_64.c +++ b/arch/x86/kernel/dumpstack_64.c @@ -106,7 +106,8 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs, const struct stacktrace_ops *ops, void *data) { const unsigned cpu = get_cpu(); - unsigned long *irqstack_end = (unsigned long *)cpu_pda(cpu)->irqstackptr; + unsigned long *irq_stack_end = + (unsigned long *)per_cpu(irq_stack_ptr, cpu); unsigned used = 0; struct thread_info *tinfo; int graph = 0; @@ -160,23 +161,23 @@ void dump_trace(struct task_struct *task, struct pt_regs *regs, stack = (unsigned long *) estack_end[-2]; continue; } - if (irqstack_end) { - unsigned long *irqstack; - irqstack = irqstack_end - - (IRQSTACKSIZE - 64) / sizeof(*irqstack); + if (irq_stack_end) { + unsigned long *irq_stack; + irq_stack = irq_stack_end - + (IRQ_STACK_SIZE - 64) / sizeof(*irq_stack); - if (stack >= irqstack && stack < irqstack_end) { + if (stack >= irq_stack && stack < irq_stack_end) { if (ops->stack(data, "IRQ") < 0) break; bp = print_context_stack(tinfo, stack, bp, - ops, data, irqstack_end, &graph); + ops, data, irq_stack_end, &graph); /* * We link to the next stack (which would be * the process stack normally) the last * pointer (index -1 to end) in the IRQ stack: */ - stack = (unsigned long *) (irqstack_end[-1]); - irqstack_end = NULL; + stack = (unsigned long *) (irq_stack_end[-1]); + irq_stack_end = NULL; ops->stack(data, "EOI"); continue; } @@ -199,10 +200,10 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, unsigned long *stack; int i; const int cpu = smp_processor_id(); - unsigned long *irqstack_end = - (unsigned long *) (cpu_pda(cpu)->irqstackptr); - unsigned long *irqstack = - (unsigned long *) (cpu_pda(cpu)->irqstackptr - IRQSTACKSIZE); + unsigned long *irq_stack_end = + (unsigned long *)(per_cpu(irq_stack_ptr, cpu)); + unsigned long *irq_stack = + (unsigned long *)(per_cpu(irq_stack_ptr, cpu) - IRQ_STACK_SIZE); /* * debugging aid: "show_stack(NULL, NULL);" prints the @@ -218,9 +219,9 @@ show_stack_log_lvl(struct task_struct *task, struct pt_regs *regs, stack = sp; for (i = 0; i < kstack_depth_to_print; i++) { - if (stack >= irqstack && stack <= irqstack_end) { - if (stack == irqstack_end) { - stack = (unsigned long *) (irqstack_end[-1]); + if (stack >= irq_stack && stack <= irq_stack_end) { + if (stack == irq_stack_end) { + stack = (unsigned long *) (irq_stack_end[-1]); printk(" <EOI> "); } } else { @@ -241,7 +242,7 @@ void show_registers(struct pt_regs *regs) int i; unsigned long sp; const int cpu = smp_processor_id(); - struct task_struct *cur = cpu_pda(cpu)->pcurrent; + struct task_struct *cur = current; sp = regs->sp; printk("CPU %d ", cpu); diff --git a/arch/x86/kernel/efi.c b/arch/x86/kernel/efi.c index 1119d247fe1..b205272ad39 100644 --- a/arch/x86/kernel/efi.c +++ b/arch/x86/kernel/efi.c @@ -366,10 +366,12 @@ void __init efi_init(void) SMBIOS_TABLE_GUID)) { efi.smbios = config_tables[i].table; printk(" SMBIOS=0x%lx ", config_tables[i].table); +#ifdef CONFIG_X86_UV } else if (!efi_guidcmp(config_tables[i].guid, UV_SYSTEM_TABLE_GUID)) { efi.uv_systab = config_tables[i].table; printk(" UVsystab=0x%lx ", config_tables[i].table); +#endif } else if (!efi_guidcmp(config_tables[i].guid, HCDP_TABLE_GUID)) { efi.hcdp = config_tables[i].table; diff --git a/arch/x86/kernel/efi_64.c b/arch/x86/kernel/efi_64.c index 652c5287215..a4ee29127fd 100644 --- a/arch/x86/kernel/efi_64.c +++ b/arch/x86/kernel/efi_64.c @@ -36,6 +36,7 @@ #include <asm/proto.h> #include <asm/efi.h> #include <asm/cacheflush.h> +#include <asm/fixmap.h> static pgd_t save_pgd __initdata; static unsigned long efi_flags __initdata; diff --git a/arch/x86/kernel/entry_32.S b/arch/x86/kernel/entry_32.S index 46469029e9d..a0b91aac72a 100644 --- a/arch/x86/kernel/entry_32.S +++ b/arch/x86/kernel/entry_32.S @@ -672,7 +672,7 @@ common_interrupt: ENDPROC(common_interrupt) CFI_ENDPROC -#define BUILD_INTERRUPT(name, nr) \ +#define BUILD_INTERRUPT3(name, nr, fn) \ ENTRY(name) \ RING0_INT_FRAME; \ pushl $~(nr); \ @@ -680,11 +680,13 @@ ENTRY(name) \ SAVE_ALL; \ TRACE_IRQS_OFF \ movl %esp,%eax; \ - call smp_##name; \ + call fn; \ jmp ret_from_intr; \ CFI_ENDPROC; \ ENDPROC(name) +#define BUILD_INTERRUPT(name, nr) BUILD_INTERRUPT3(name, nr, smp_##name) + /* The include is where all of the SMP etc. interrupts come from */ #include "entry_arch.h" diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S index e28c7a98779..82801fd2e93 100644 --- a/arch/x86/kernel/entry_64.S +++ b/arch/x86/kernel/entry_64.S @@ -52,6 +52,7 @@ #include <asm/irqflags.h> #include <asm/paravirt.h> #include <asm/ftrace.h> +#include <asm/percpu.h> /* Avoid __ASSEMBLER__'ifying <linux/audit.h> just for this. */ #include <linux/elf-em.h> @@ -209,7 +210,7 @@ ENTRY(native_usergs_sysret64) /* %rsp:at FRAMEEND */ .macro FIXUP_TOP_OF_STACK tmp offset=0 - movq %gs:pda_oldrsp,\tmp + movq PER_CPU_VAR(old_rsp),\tmp movq \tmp,RSP+\offset(%rsp) movq $__USER_DS,SS+\offset(%rsp) movq $__USER_CS,CS+\offset(%rsp) @@ -220,7 +221,7 @@ ENTRY(native_usergs_sysret64) .macro RESTORE_TOP_OF_STACK tmp offset=0 movq RSP+\offset(%rsp),\tmp - movq \tmp,%gs:pda_oldrsp + movq \tmp,PER_CPU_VAR(old_rsp) movq EFLAGS+\offset(%rsp),\tmp movq \tmp,R11+\offset(%rsp) .endm @@ -336,15 +337,15 @@ ENTRY(save_args) je 1f SWAPGS /* - * irqcount is used to check if a CPU is already on an interrupt stack + * irq_count is used to check if a CPU is already on an interrupt stack * or not. While this is essentially redundant with preempt_count it is * a little cheaper to use a separate counter in the PDA (short of * moving irq_enter into assembly, which would be too much work) */ -1: incl %gs:pda_irqcount +1: incl PER_CPU_VAR(irq_count) jne 2f popq_cfi %rax /* move return address... */ - mov %gs:pda_irqstackptr,%rsp + mov PER_CPU_VAR(irq_stack_ptr),%rsp EMPTY_FRAME 0 pushq_cfi %rax /* ... to the new stack */ /* @@ -408,6 +409,8 @@ END(save_paranoid) ENTRY(ret_from_fork) DEFAULT_FRAME + LOCK ; btr $TIF_FORK,TI_flags(%r8) + push kernel_eflags(%rip) CFI_ADJUST_CFA_OFFSET 8 popf # reset kernel eflags @@ -467,7 +470,7 @@ END(ret_from_fork) ENTRY(system_call) CFI_STARTPROC simple CFI_SIGNAL_FRAME - CFI_DEF_CFA rsp,PDA_STACKOFFSET + CFI_DEF_CFA rsp,KERNEL_STACK_OFFSET CFI_REGISTER rip,rcx /*CFI_REGISTER rflags,r11*/ SWAPGS_UNSAFE_STACK @@ -478,8 +481,8 @@ ENTRY(system_call) */ ENTRY(system_call_after_swapgs) - movq %rsp,%gs:pda_oldrsp - movq %gs:pda_kernelstack,%rsp + movq %rsp,PER_CPU_VAR(old_rsp) + movq PER_CPU_VAR(kernel_stack),%rsp /* * No need to follow this irqs off/on section - it's straight * and short: @@ -522,7 +525,7 @@ sysret_check: CFI_REGISTER rip,rcx RESTORE_ARGS 0,-ARG_SKIP,1 /*CFI_REGISTER rflags,r11*/ - movq %gs:pda_oldrsp, %rsp + movq PER_CPU_VAR(old_rsp), %rsp USERGS_SYSRET64 CFI_RESTORE_STATE @@ -832,11 +835,11 @@ common_interrupt: XCPT_FRAME addq $-0x80,(%rsp) /* Adjust vector to [-256,-1] range */ interrupt do_IRQ - /* 0(%rsp): oldrsp-ARGOFFSET */ + /* 0(%rsp): old_rsp-ARGOFFSET */ ret_from_intr: DISABLE_INTERRUPTS(CLBR_NONE) TRACE_IRQS_OFF - decl %gs:pda_irqcount + decl PER_CPU_VAR(irq_count) leaveq CFI_DEF_CFA_REGISTER rsp CFI_ADJUST_CFA_OFFSET -8 @@ -981,8 +984,10 @@ apicinterrupt IRQ_MOVE_CLEANUP_VECTOR \ irq_move_cleanup_interrupt smp_irq_move_cleanup_interrupt #endif +#ifdef CONFIG_X86_UV apicinterrupt UV_BAU_MESSAGE \ uv_bau_message_intr1 uv_bau_message_interrupt +#endif apicinterrupt LOCAL_TIMER_VECTOR \ apic_timer_interrupt smp_apic_timer_interrupt @@ -1072,10 +1077,10 @@ ENTRY(\sym) TRACE_IRQS_OFF movq %rsp,%rdi /* pt_regs pointer */ xorl %esi,%esi /* no error code */ - movq %gs:pda_data_offset, %rbp - subq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp) + PER_CPU(init_tss, %rbp) + subq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%rbp) call \do_sym - addq $EXCEPTION_STKSZ, per_cpu__init_tss + TSS_ist + (\ist - 1) * 8(%rbp) + addq $EXCEPTION_STKSZ, TSS_ist + (\ist - 1) * 8(%rbp) jmp paranoid_exit /* %ebx: no swapgs flag */ CFI_ENDPROC END(\sym) @@ -1259,14 +1264,14 @@ ENTRY(call_softirq) CFI_REL_OFFSET rbp,0 mov %rsp,%rbp CFI_DEF_CFA_REGISTER rbp - incl %gs:pda_irqcount - cmove %gs:pda_irqstackptr,%rsp + incl PER_CPU_VAR(irq_count) + cmove PER_CPU_VAR(irq_stack_ptr),%rsp push %rbp # backlink for old unwinder call __do_softirq leaveq CFI_DEF_CFA_REGISTER rsp CFI_ADJUST_CFA_OFFSET -8 - decl %gs:pda_irqcount + decl PER_CPU_VAR(irq_count) ret CFI_ENDPROC END(call_softirq) @@ -1296,15 +1301,15 @@ ENTRY(xen_do_hypervisor_callback) # do_hypervisor_callback(struct *pt_regs) movq %rdi, %rsp # we don't return, adjust the stack frame CFI_ENDPROC DEFAULT_FRAME -11: incl %gs:pda_irqcount +11: incl PER_CPU_VAR(irq_count) movq %rsp,%rbp CFI_DEF_CFA_REGISTER rbp - cmovzq %gs:pda_irqstackptr,%rsp + cmovzq PER_CPU_VAR(irq_stack_ptr),%rsp pushq %rbp # backlink for old unwinder call xen_evtchn_do_upcall popq %rsp CFI_DEF_CFA_REGISTER rsp - decl %gs:pda_irqcount + decl PER_CPU_VAR(irq_count) jmp error_exit CFI_ENDPROC END(do_hypervisor_callback) diff --git a/arch/x86/kernel/genapic_64.c b/arch/x86/kernel/genapic_64.c index 2bced78b0b8..e656c272115 100644 --- a/arch/x86/kernel/genapic_64.c +++ b/arch/x86/kernel/genapic_64.c @@ -32,7 +32,9 @@ extern struct genapic apic_x2apic_cluster; struct genapic __read_mostly *genapic = &apic_flat; static struct genapic *apic_probe[] __initdata = { +#ifdef CONFIG_X86_UV &apic_x2apic_uv_x, +#endif &apic_x2apic_phys, &apic_x2apic_cluster, &apic_physflat, diff --git a/arch/x86/kernel/genx2apic_uv_x.c b/arch/x86/kernel/genx2apic_uv_x.c index b193e082f6c..bfe36249145 100644 --- a/arch/x86/kernel/genx2apic_uv_x.c +++ b/arch/x86/kernel/genx2apic_uv_x.c @@ -25,6 +25,7 @@ #include <asm/ipi.h> #include <asm/genapic.h> #include <asm/pgtable.h> +#include <asm/uv/uv.h> #include <asm/uv/uv_mmrs.h> #include <asm/uv/uv_hub.h> #include <asm/uv/bios.h> diff --git a/arch/x86/kernel/head64.c b/arch/x86/kernel/head64.c index b9a4d8c4b93..f5b27224769 100644 --- a/arch/x86/kernel/head64.c +++ b/arch/x86/kernel/head64.c @@ -26,27 +26,6 @@ #include <asm/bios_ebda.h> #include <asm/trampoline.h> -/* boot cpu pda */ -static struct x8664_pda _boot_cpu_pda; - -#ifdef CONFIG_SMP -/* - * We install an empty cpu_pda pointer table to indicate to early users - * (numa_set_node) that the cpu_pda pointer table for cpus other than - * the boot cpu is not yet setup. - */ -static struct x8664_pda *__cpu_pda[NR_CPUS] __initdata; -#else -static struct x8664_pda *__cpu_pda[NR_CPUS] __read_mostly; -#endif - -void __init x86_64_init_pda(void) -{ - _cpu_pda = __cpu_pda; - cpu_pda(0) = &_boot_cpu_pda; - pda_init(0); -} - static void __init zap_identity_mappings(void) { pgd_t *pgd = pgd_offset_k(0UL); @@ -112,8 +91,6 @@ void __init x86_64_start_kernel(char * real_mode_data) if (console_loglevel == 10) early_printk("Kernel alive\n"); - x86_64_init_pda(); - x86_64_start_reservations(real_mode_data); } diff --git a/arch/x86/kernel/head_32.S b/arch/x86/kernel/head_32.S index e835b4eea70..722464c520c 100644 --- a/arch/x86/kernel/head_32.S +++ b/arch/x86/kernel/head_32.S @@ -429,12 +429,14 @@ is386: movl $2,%ecx # set MP ljmp $(__KERNEL_CS),$1f 1: movl $(__KERNEL_DS),%eax # reload all the segment registers movl %eax,%ss # after changing gdt. - movl %eax,%fs # gets reset once there's real percpu movl $(__USER_DS),%eax # DS/ES contains default USER segment movl %eax,%ds movl %eax,%es + movl $(__KERNEL_PERCPU), %eax + movl %eax,%fs # set this cpu's percpu + xorl %eax,%eax # Clear GS and LDT movl %eax,%gs lldt %ax @@ -446,8 +448,6 @@ is386: movl $2,%ecx # set MP movb $1, ready cmpb $0,%cl # the first CPU calls start_kernel je 1f - movl $(__KERNEL_PERCPU), %eax - movl %eax,%fs # set this cpu's percpu movl (stack_start), %esp 1: #endif /* CONFIG_SMP */ @@ -548,12 +548,8 @@ early_fault: pushl %eax pushl %edx /* trapno */ pushl $fault_msg -#ifdef CONFIG_EARLY_PRINTK - call early_printk -#else call printk #endif -#endif call dump_stack hlt_loop: hlt @@ -580,11 +576,10 @@ ignore_int: pushl 32(%esp) pushl 40(%esp) pushl $int_msg -#ifdef CONFIG_EARLY_PRINTK - call early_printk -#else call printk -#endif + + call dump_stack + addl $(5*4),%esp popl %ds popl %es @@ -660,7 +655,7 @@ early_recursion_flag: .long 0 int_msg: - .asciz "Unknown interrupt or fault at EIP %p %p %p\n" + .asciz "Unknown interrupt or fault at: %p %p %p\n" fault_msg: /* fault info: */ diff --git a/arch/x86/kernel/head_64.S b/arch/x86/kernel/head_64.S index 0e275d49556..a0a2b5ca9b7 100644 --- a/arch/x86/kernel/head_64.S +++ b/arch/x86/kernel/head_64.S @@ -19,6 +19,7 @@ #include <asm/msr.h> #include <asm/cache.h> #include <asm/processor-flags.h> +#include <asm/percpu.h> #ifdef CONFIG_PARAVIRT #include <asm/asm-offsets.h> @@ -204,6 +205,19 @@ ENTRY(secondary_startup_64) pushq $0 popfq +#ifdef CONFIG_SMP + /* + * Fix up static pointers that need __per_cpu_load added. The assembler + * is unable to do this directly. This is only needed for the boot cpu. + * These values are set up with the correct base addresses by C code for + * secondary cpus. + */ + movq initial_gs(%rip), %rax + cmpl $0, per_cpu__cpu_number(%rax) + jne 1f + addq %rax, early_gdt_descr_base(%rip) +1: +#endif /* * We must switch to a new descriptor in kernel space for the GDT * because soon the kernel won't have access anymore to the userspace @@ -226,12 +240,15 @@ ENTRY(secondary_startup_64) movl %eax,%fs movl %eax,%gs - /* - * Setup up a dummy PDA. this is just for some early bootup code - * that does in_interrupt() - */ + /* Set up %gs. + * + * The base of %gs always points to the bottom of the irqstack + * union. If the stack protector canary is enabled, it is + * located at %gs:40. Note that, on SMP, the boot cpu uses + * init data section till per cpu areas are set up. + */ movl $MSR_GS_BASE,%ecx - movq $empty_zero_page,%rax + movq initial_gs(%rip),%rax movq %rax,%rdx shrq $32,%rdx wrmsr @@ -257,6 +274,12 @@ ENTRY(secondary_startup_64) .align 8 ENTRY(initial_code) .quad x86_64_start_kernel + ENTRY(initial_gs) +#ifdef CONFIG_SMP + .quad __per_cpu_load +#else + .quad PER_CPU_VAR(irq_stack_union) +#endif __FINITDATA ENTRY(stack_start) @@ -401,7 +424,8 @@ NEXT_PAGE(level2_spare_pgt) .globl early_gdt_descr early_gdt_descr: .word GDT_ENTRIES*8-1 - .quad per_cpu__gdt_page +early_gdt_descr_base: + .quad per_cpu__gdt_page ENTRY(phys_base) /* This must match the first entry in level2_kernel_pgt */ diff --git a/arch/x86/kernel/hpet.c b/arch/x86/kernel/hpet.c index cd759ad9069..64d5ad0b8ad 100644 --- a/arch/x86/kernel/hpet.c +++ b/arch/x86/kernel/hpet.c @@ -628,11 +628,12 @@ static int hpet_cpuhp_notify(struct notifier_block *n, switch (action & 0xf) { case CPU_ONLINE: - INIT_DELAYED_WORK(&work.work, hpet_work); + INIT_DELAYED_WORK_ON_STACK(&work.work, hpet_work); init_completion(&work.complete); /* FIXME: add schedule_work_on() */ schedule_delayed_work_on(cpu, &work.work, 0); wait_for_completion(&work.complete); + destroy_timer_on_stack(&work.work.timer); break; case CPU_DEAD: if (hdev) { diff --git a/arch/x86/kernel/io_apic.c b/arch/x86/kernel/io_apic.c index 1c4a1302536..bfb7d734062 100644 --- a/arch/x86/kernel/io_apic.c +++ b/arch/x86/kernel/io_apic.c @@ -46,6 +46,7 @@ #include <asm/idle.h> #include <asm/io.h> #include <asm/smp.h> +#include <asm/cpu.h> #include <asm/desc.h> #include <asm/proto.h> #include <asm/acpi.h> @@ -82,11 +83,11 @@ static DEFINE_SPINLOCK(vector_lock); int nr_ioapic_registers[MAX_IO_APICS]; /* I/O APIC entries */ -struct mp_config_ioapic mp_ioapics[MAX_IO_APICS]; +struct mpc_ioapic mp_ioapics[MAX_IO_APICS]; int nr_ioapics; /* MP IRQ source entries */ -struct mp_config_intsrc mp_irqs[MAX_IRQ_SOURCES]; +struct mpc_intsrc mp_irqs[MAX_IRQ_SOURCES]; /* # of MP IRQ source entries */ int mp_irq_entries; @@ -356,7 +357,7 @@ set_extra_move_desc(struct irq_desc *desc, const struct cpumask *mask) if (!cfg->move_in_progress) { /* it means that domain is not changed */ - if (!cpumask_intersects(&desc->affinity, mask)) + if (!cpumask_intersects(desc->affinity, mask)) cfg->move_desc_pending = 1; } } @@ -386,7 +387,7 @@ struct io_apic { static __attribute_const__ struct io_apic __iomem *io_apic_base(int idx) { return (void __iomem *) __fix_to_virt(FIX_IO_APIC_BASE_0 + idx) - + (mp_ioapics[idx].mp_apicaddr & ~PAGE_MASK); + + (mp_ioapics[idx].apicaddr & ~PAGE_MASK); } static inline unsigned int io_apic_read(unsigned int apic, unsigned int reg) @@ -579,9 +580,9 @@ set_desc_affinity(struct irq_desc *desc, const struct cpumask *mask) if (assign_irq_vector(irq, cfg, mask)) return BAD_APICID; - cpumask_and(&desc->affinity, cfg->domain, mask); + cpumask_and(desc->affinity, cfg->domain, mask); set_extra_move_desc(desc, mask); - return cpu_mask_to_apicid_and(&desc->affinity, cpu_online_mask); + return cpu_mask_to_apicid_and(desc->affinity, cpu_online_mask); } static void @@ -944,10 +945,10 @@ static int find_irq_entry(int apic, int pin, int type) int i; for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mp_irqtype == type && - (mp_irqs[i].mp_dstapic == mp_ioapics[apic].mp_apicid || - mp_irqs[i].mp_dstapic == MP_APIC_ALL) && - mp_irqs[i].mp_dstirq == pin) + if (mp_irqs[i].irqtype == type && + (mp_irqs[i].dstapic == mp_ioapics[apic].apicid || + mp_irqs[i].dstapic == MP_APIC_ALL) && + mp_irqs[i].dstirq == pin) return i; return -1; @@ -961,13 +962,13 @@ static int __init find_isa_irq_pin(int irq, int type) int i; for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mp_srcbus; + int lbus = mp_irqs[i].srcbus; if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mp_irqtype == type) && - (mp_irqs[i].mp_srcbusirq == irq)) + (mp_irqs[i].irqtype == type) && + (mp_irqs[i].srcbusirq == irq)) - return mp_irqs[i].mp_dstirq; + return mp_irqs[i].dstirq; } return -1; } @@ -977,17 +978,17 @@ static int __init find_isa_irq_apic(int irq, int type) int i; for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mp_srcbus; + int lbus = mp_irqs[i].srcbus; if (test_bit(lbus, mp_bus_not_pci) && - (mp_irqs[i].mp_irqtype == type) && - (mp_irqs[i].mp_srcbusirq == irq)) + (mp_irqs[i].irqtype == type) && + (mp_irqs[i].srcbusirq == irq)) break; } if (i < mp_irq_entries) { int apic; for(apic = 0; apic < nr_ioapics; apic++) { - if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic) + if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic) return apic; } } @@ -1012,23 +1013,23 @@ int IO_APIC_get_PCI_irq_vector(int bus, int slot, int pin) return -1; } for (i = 0; i < mp_irq_entries; i++) { - int lbus = mp_irqs[i].mp_srcbus; + int lbus = mp_irqs[i].srcbus; for (apic = 0; apic < nr_ioapics; apic++) - if (mp_ioapics[apic].mp_apicid == mp_irqs[i].mp_dstapic || - mp_irqs[i].mp_dstapic == MP_APIC_ALL) + if (mp_ioapics[apic].apicid == mp_irqs[i].dstapic || + mp_irqs[i].dstapic == MP_APIC_ALL) break; if (!test_bit(lbus, mp_bus_not_pci) && - !mp_irqs[i].mp_irqtype && + !mp_irqs[i].irqtype && (bus == lbus) && - (slot == ((mp_irqs[i].mp_srcbusirq >> 2) & 0x1f))) { - int irq = pin_2_irq(i,apic,mp_irqs[i].mp_dstirq); + (slot == ((mp_irqs[i].srcbusirq >> 2) & 0x1f))) { + int irq = pin_2_irq(i, apic, mp_irqs[i].dstirq); if (!(apic || IO_APIC_IRQ(irq))) continue; - if (pin == (mp_irqs[i].mp_srcbusirq & 3)) + if (pin == (mp_irqs[i].srcbusirq & 3)) return irq; /* * Use the first all-but-pin matching entry as a @@ -1071,7 +1072,7 @@ static int EISA_ELCR(unsigned int irq) * EISA conforming in the MP table, that means its trigger type must * be read in from the ELCR */ -#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].mp_srcbusirq)) +#define default_EISA_trigger(idx) (EISA_ELCR(mp_irqs[idx].srcbusirq)) #define default_EISA_polarity(idx) default_ISA_polarity(idx) /* PCI interrupts are always polarity one level triggered, @@ -1088,13 +1089,13 @@ static int EISA_ELCR(unsigned int irq) static int MPBIOS_polarity(int idx) { - int bus = mp_irqs[idx].mp_srcbus; + int bus = mp_irqs[idx].srcbus; int polarity; /* * Determine IRQ line polarity (high active or low active): */ - switch (mp_irqs[idx].mp_irqflag & 3) + switch (mp_irqs[idx].irqflag & 3) { case 0: /* conforms, ie. bus-type dependent polarity */ if (test_bit(bus, mp_bus_not_pci)) @@ -1130,13 +1131,13 @@ static int MPBIOS_polarity(int idx) static int MPBIOS_trigger(int idx) { - int bus = mp_irqs[idx].mp_srcbus; + int bus = mp_irqs[idx].srcbus; int trigger; /* * Determine IRQ trigger mode (edge or level sensitive): */ - switch ((mp_irqs[idx].mp_irqflag>>2) & 3) + switch ((mp_irqs[idx].irqflag>>2) & 3) { case 0: /* conforms, ie. bus-type dependent */ if (test_bit(bus, mp_bus_not_pci)) @@ -1214,16 +1215,16 @@ int (*ioapic_renumber_irq)(int ioapic, int irq); static int pin_2_irq(int idx, int apic, int pin) { int irq, i; - int bus = mp_irqs[idx].mp_srcbus; + int bus = mp_irqs[idx].srcbus; /* * Debugging check, we are in big trouble if this message pops up! */ - if (mp_irqs[idx].mp_dstirq != pin) + if (mp_irqs[idx].dstirq != pin) printk(KERN_ERR "broken BIOS or MPTABLE parser, ayiee!!\n"); if (test_bit(bus, mp_bus_not_pci)) { - irq = mp_irqs[idx].mp_srcbusirq; + irq = mp_irqs[idx].srcbusirq; } else { /* * PCI IRQs are mapped in order @@ -1566,14 +1567,14 @@ static void setup_IO_APIC_irq(int apic, int pin, unsigned int irq, struct irq_de apic_printk(APIC_VERBOSE,KERN_DEBUG "IOAPIC[%d]: Set routing entry (%d-%d -> 0x%x -> " "IRQ %d Mode:%i Active:%i)\n", - apic, mp_ioapics[apic].mp_apicid, pin, cfg->vector, + apic, mp_ioapics[apic].apicid, pin, cfg->vector, irq, trigger, polarity); - if (setup_ioapic_entry(mp_ioapics[apic].mp_apicid, irq, &entry, + if (setup_ioapic_entry(mp_ioapics[apic].apicid, irq, &entry, dest, trigger, polarity, cfg->vector)) { printk("Failed to setup ioapic entry for ioapic %d, pin %d\n", - mp_ioapics[apic].mp_apicid, pin); + mp_ioapics[apic].apicid, pin); __clear_irq_vector(irq, cfg); return; } @@ -1604,12 +1605,10 @@ static void __init setup_IO_APIC_irqs(void) notcon = 1; apic_printk(APIC_VERBOSE, KERN_DEBUG " %d-%d", - mp_ioapics[apic].mp_apicid, - pin); + mp_ioapics[apic].apicid, pin); } else apic_printk(APIC_VERBOSE, " %d-%d", - mp_ioapics[apic].mp_apicid, - pin); + mp_ioapics[apic].apicid, pin); continue; } if (notcon) { @@ -1699,7 +1698,7 @@ __apicdebuginit(void) print_IO_APIC(void) printk(KERN_DEBUG "number of MP IRQ sources: %d.\n", mp_irq_entries); for (i = 0; i < nr_ioapics; i++) printk(KERN_DEBUG "number of IO-APIC #%d registers: %d.\n", - mp_ioapics[i].mp_apicid, nr_ioapic_registers[i]); + mp_ioapics[i].apicid, nr_ioapic_registers[i]); /* * We are a bit conservative about what we expect. We have to @@ -1719,7 +1718,7 @@ __apicdebuginit(void) print_IO_APIC(void) spin_unlock_irqrestore(&ioapic_lock, flags); printk("\n"); - printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].mp_apicid); + printk(KERN_DEBUG "IO APIC #%d......\n", mp_ioapics[apic].apicid); printk(KERN_DEBUG ".... register #00: %08X\n", reg_00.raw); printk(KERN_DEBUG "....... : physical APIC id: %02X\n", reg_00.bits.ID); printk(KERN_DEBUG "....... : Delivery Type: %X\n", reg_00.bits.delivery_type); @@ -2121,14 +2120,14 @@ static void __init setup_ioapic_ids_from_mpc(void) reg_00.raw = io_apic_read(apic, 0); spin_unlock_irqrestore(&ioapic_lock, flags); - old_id = mp_ioapics[apic].mp_apicid; + old_id = mp_ioapics[apic].apicid; - if (mp_ioapics[apic].mp_apicid >= get_physical_broadcast()) { + if (mp_ioapics[apic].apicid >= get_physical_broadcast()) { printk(KERN_ERR "BIOS bug, IO-APIC#%d ID is %d in the MPC table!...\n", - apic, mp_ioapics[apic].mp_apicid); + apic, mp_ioapics[apic].apicid); printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", reg_00.bits.ID); - mp_ioapics[apic].mp_apicid = reg_00.bits.ID; + mp_ioapics[apic].apicid = reg_00.bits.ID; } /* @@ -2137,9 +2136,9 @@ static void __init setup_ioapic_ids_from_mpc(void) * 'stuck on smp_invalidate_needed IPI wait' messages. */ if (check_apicid_used(phys_id_present_map, - mp_ioapics[apic].mp_apicid)) { + mp_ioapics[apic].apicid)) { printk(KERN_ERR "BIOS bug, IO-APIC#%d ID %d is already used!...\n", - apic, mp_ioapics[apic].mp_apicid); + apic, mp_ioapics[apic].apicid); for (i = 0; i < get_physical_broadcast(); i++) if (!physid_isset(i, phys_id_present_map)) break; @@ -2148,13 +2147,13 @@ static void __init setup_ioapic_ids_from_mpc(void) printk(KERN_ERR "... fixing up to %d. (tell your hw vendor)\n", i); physid_set(i, phys_id_present_map); - mp_ioapics[apic].mp_apicid = i; + mp_ioapics[apic].apicid = i; } else { physid_mask_t tmp; - tmp = apicid_to_cpu_present(mp_ioapics[apic].mp_apicid); + tmp = apicid_to_cpu_present(mp_ioapics[apic].apicid); apic_printk(APIC_VERBOSE, "Setting %d in the " "phys_id_present_map\n", - mp_ioapics[apic].mp_apicid); + mp_ioapics[apic].apicid); physids_or(phys_id_present_map, phys_id_present_map, tmp); } @@ -2163,11 +2162,11 @@ static void __init setup_ioapic_ids_from_mpc(void) * We need to adjust the IRQ routing table * if the ID changed. */ - if (old_id != mp_ioapics[apic].mp_apicid) + if (old_id != mp_ioapics[apic].apicid) for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mp_dstapic == old_id) - mp_irqs[i].mp_dstapic - = mp_ioapics[apic].mp_apicid; + if (mp_irqs[i].dstapic == old_id) + mp_irqs[i].dstapic + = mp_ioapics[apic].apicid; /* * Read the right value from the MPC table and @@ -2175,9 +2174,9 @@ static void __init setup_ioapic_ids_from_mpc(void) */ apic_printk(APIC_VERBOSE, KERN_INFO "...changing IO-APIC physical APIC ID to %d ...", - mp_ioapics[apic].mp_apicid); + mp_ioapics[apic].apicid); - reg_00.bits.ID = mp_ioapics[apic].mp_apicid; + reg_00.bits.ID = mp_ioapics[apic].apicid; spin_lock_irqsave(&ioapic_lock, flags); io_apic_write(apic, 0, reg_00.raw); spin_unlock_irqrestore(&ioapic_lock, flags); @@ -2188,7 +2187,7 @@ static void __init setup_ioapic_ids_from_mpc(void) spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(apic, 0); spin_unlock_irqrestore(&ioapic_lock, flags); - if (reg_00.bits.ID != mp_ioapics[apic].mp_apicid) + if (reg_00.bits.ID != mp_ioapics[apic].apicid) printk("could not set ID!\n"); else apic_printk(APIC_VERBOSE, " ok.\n"); @@ -2383,7 +2382,7 @@ migrate_ioapic_irq_desc(struct irq_desc *desc, const struct cpumask *mask) if (cfg->move_in_progress) send_cleanup_vector(cfg); - cpumask_copy(&desc->affinity, mask); + cpumask_copy(desc->affinity, mask); } static int migrate_irq_remapped_level_desc(struct irq_desc *desc) @@ -2405,11 +2404,11 @@ static int migrate_irq_remapped_level_desc(struct irq_desc *desc) } /* everthing is clear. we have right of way */ - migrate_ioapic_irq_desc(desc, &desc->pending_mask); + migrate_ioapic_irq_desc(desc, desc->pending_mask); ret = 0; desc->status &= ~IRQ_MOVE_PENDING; - cpumask_clear(&desc->pending_mask); + cpumask_clear(desc->pending_mask); unmask: unmask_IO_APIC_irq_desc(desc); @@ -2434,7 +2433,7 @@ static void ir_irq_migration(struct work_struct *work) continue; } - desc->chip->set_affinity(irq, &desc->pending_mask); + desc->chip->set_affinity(irq, desc->pending_mask); spin_unlock_irqrestore(&desc->lock, flags); } } @@ -2448,7 +2447,7 @@ static void set_ir_ioapic_affinity_irq_desc(struct irq_desc *desc, { if (desc->status & IRQ_LEVEL) { desc->status |= IRQ_MOVE_PENDING; - cpumask_copy(&desc->pending_mask, mask); + cpumask_copy(desc->pending_mask, mask); migrate_irq_remapped_level_desc(desc); return; } @@ -2516,7 +2515,7 @@ static void irq_complete_move(struct irq_desc **descp) /* domain has not changed, but affinity did */ me = smp_processor_id(); - if (cpu_isset(me, desc->affinity)) { + if (cpumask_test_cpu(me, desc->affinity)) { *descp = desc = move_irq_desc(desc, me); /* get the new one */ cfg = desc->chip_data; @@ -3117,8 +3116,8 @@ static int ioapic_resume(struct sys_device *dev) spin_lock_irqsave(&ioapic_lock, flags); reg_00.raw = io_apic_read(dev->id, 0); - if (reg_00.bits.ID != mp_ioapics[dev->id].mp_apicid) { - reg_00.bits.ID = mp_ioapics[dev->id].mp_apicid; + if (reg_00.bits.ID != mp_ioapics[dev->id].apicid) { + reg_00.bits.ID = mp_ioapics[dev->id].apicid; io_apic_write(dev->id, 0, reg_00.raw); } spin_unlock_irqrestore(&ioapic_lock, flags); @@ -3183,7 +3182,7 @@ unsigned int create_irq_nr(unsigned int irq_want) irq = 0; spin_lock_irqsave(&vector_lock, flags); - for (new = irq_want; new < NR_IRQS; new++) { + for (new = irq_want; new < nr_irqs; new++) { if (platform_legacy_irq(new)) continue; @@ -3258,6 +3257,9 @@ static int msi_compose_msg(struct pci_dev *pdev, unsigned int irq, struct msi_ms int err; unsigned dest; + if (disable_apic) + return -ENXIO; + cfg = irq_cfg(irq); err = assign_irq_vector(irq, cfg, TARGET_CPUS); if (err) @@ -3463,40 +3465,6 @@ static int setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc, int irq) return 0; } -int arch_setup_msi_irq(struct pci_dev *dev, struct msi_desc *msidesc) -{ - unsigned int irq; - int ret; - unsigned int irq_want; - - irq_want = nr_irqs_gsi; - irq = create_irq_nr(irq_want); - if (irq == 0) - return -1; - -#ifdef CONFIG_INTR_REMAP - if (!intr_remapping_enabled) - goto no_ir; - - ret = msi_alloc_irte(dev, irq, 1); - if (ret < 0) - goto error; -no_ir: -#endif - ret = setup_msi_irq(dev, msidesc, irq); - if (ret < 0) { - destroy_irq(irq); - return ret; - } - return 0; - -#ifdef CONFIG_INTR_REMAP -error: - destroy_irq(irq); - return ret; -#endif -} - int arch_setup_msi_irqs(struct pci_dev *dev, int nvec, int type) { unsigned int irq; @@ -3726,6 +3694,9 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) struct irq_cfg *cfg; int err; + if (disable_apic) + return -ENXIO; + cfg = irq_cfg(irq); err = assign_irq_vector(irq, cfg, TARGET_CPUS); if (!err) { @@ -3760,7 +3731,7 @@ int arch_setup_ht_irq(unsigned int irq, struct pci_dev *dev) } #endif /* CONFIG_HT_IRQ */ -#ifdef CONFIG_X86_64 +#ifdef CONFIG_X86_UV /* * Re-target the irq to the specified CPU and enable the specified MMR located * on the specified blade to allow the sending of MSIs to the specified CPU. @@ -3850,6 +3821,22 @@ void __init probe_nr_irqs_gsi(void) nr_irqs_gsi = nr; } +#ifdef CONFIG_SPARSE_IRQ +int __init arch_probe_nr_irqs(void) +{ + int nr; + + nr = ((8 * nr_cpu_ids) > (32 * nr_ioapics) ? + (NR_VECTORS + (8 * nr_cpu_ids)) : + (NR_VECTORS + (32 * nr_ioapics))); + + if (nr < nr_irqs && nr > nr_irqs_gsi) + nr_irqs = nr; + + return 0; +} +#endif + /* -------------------------------------------------------------------------- ACPI-based IOAPIC Configuration -------------------------------------------------------------------------- */ @@ -3984,8 +3971,8 @@ int acpi_get_override_irq(int bus_irq, int *trigger, int *polarity) return -1; for (i = 0; i < mp_irq_entries; i++) - if (mp_irqs[i].mp_irqtype == mp_INT && - mp_irqs[i].mp_srcbusirq == bus_irq) + if (mp_irqs[i].irqtype == mp_INT && + mp_irqs[i].srcbusirq == bus_irq) break; if (i >= mp_irq_entries) return -1; @@ -4039,7 +4026,7 @@ void __init setup_ioapic_dest(void) */ if (desc->status & (IRQ_NO_BALANCING | IRQ_AFFINITY_SET)) - mask = &desc->affinity; + mask = desc->affinity; else mask = TARGET_CPUS; @@ -4100,7 +4087,7 @@ void __init ioapic_init_mappings(void) ioapic_res = ioapic_setup_resources(); for (i = 0; i < nr_ioapics; i++) { if (smp_found_config) { - ioapic_phys = mp_ioapics[i].mp_apicaddr; + ioapic_phys = mp_ioapics[i].apicaddr; #ifdef CONFIG_X86_32 if (!ioapic_phys) { printk(KERN_ERR diff --git a/arch/x86/kernel/irq.c b/arch/x86/kernel/irq.c index 3973e2df7f8..8b30d0c2512 100644 --- a/arch/x86/kernel/irq.c +++ b/arch/x86/kernel/irq.c @@ -36,11 +36,7 @@ void ack_bad_irq(unsigned int irq) #endif } -#ifdef CONFIG_X86_32 -# define irq_stats(x) (&per_cpu(irq_stat, x)) -#else -# define irq_stats(x) cpu_pda(x) -#endif +#define irq_stats(x) (&per_cpu(irq_stat, x)) /* * /proc/interrupts printing: */ diff --git a/arch/x86/kernel/irq_32.c b/arch/x86/kernel/irq_32.c index 74b9ff7341e..e0f29be8ab0 100644 --- a/arch/x86/kernel/irq_32.c +++ b/arch/x86/kernel/irq_32.c @@ -248,7 +248,7 @@ void fixup_irqs(void) if (irq == 2) continue; - affinity = &desc->affinity; + affinity = desc->affinity; if (cpumask_any_and(affinity, cpu_online_mask) >= nr_cpu_ids) { printk("Breaking affinity for irq %i\n", irq); affinity = cpu_all_mask; diff --git a/arch/x86/kernel/irq_64.c b/arch/x86/kernel/irq_64.c index 63c88e6ec02..018963aa6ee 100644 --- a/arch/x86/kernel/irq_64.c +++ b/arch/x86/kernel/irq_64.c @@ -18,6 +18,13 @@ #include <linux/smp.h> #include <asm/io_apic.h> #include <asm/idle.h> +#include <asm/apic.h> + +DEFINE_PER_CPU_SHARED_ALIGNED(irq_cpustat_t, irq_stat); +EXPORT_PER_CPU_SYMBOL(irq_stat); + +DEFINE_PER_CPU(struct pt_regs *, irq_regs); +EXPORT_PER_CPU_SYMBOL(irq_regs); /* * Probabilistic stack overflow check: @@ -100,7 +107,7 @@ void fixup_irqs(void) /* interrupt's are disabled at this point */ spin_lock(&desc->lock); - affinity = &desc->affinity; + affinity = desc->affinity; if (!irq_has_action(irq) || cpumask_equal(affinity, cpu_online_mask)) { spin_unlock(&desc->lock); diff --git a/arch/x86/kernel/irqinit_32.c b/arch/x86/kernel/irqinit_32.c index 1507ad4e674..bf629cadec1 100644 --- a/arch/x86/kernel/irqinit_32.c +++ b/arch/x86/kernel/irqinit_32.c @@ -149,8 +149,15 @@ void __init native_init_IRQ(void) */ alloc_intr_gate(RESCHEDULE_VECTOR, reschedule_interrupt); - /* IPI for invalidation */ - alloc_intr_gate(INVALIDATE_TLB_VECTOR, invalidate_interrupt); + /* IPIs for invalidation */ + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+0, invalidate_interrupt0); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+1, invalidate_interrupt1); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+2, invalidate_interrupt2); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+3, invalidate_interrupt3); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+4, invalidate_interrupt4); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+5, invalidate_interrupt5); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+6, invalidate_interrupt6); + alloc_intr_gate(INVALIDATE_TLB_VECTOR_START+7, invalidate_interrupt7); /* IPI for generic function call */ alloc_intr_gate(CALL_FUNCTION_VECTOR, call_function_interrupt); diff --git a/arch/x86/kernel/microcode_intel.c b/arch/x86/kernel/microcode_intel.c index b7f4c929e61..5e9f4fc5138 100644 --- a/arch/x86/kernel/microcode_intel.c +++ b/arch/x86/kernel/microcode_intel.c @@ -87,9 +87,9 @@ #include <linux/cpu.h> #include <linux/firmware.h> #include <linux/platform_device.h> +#include <linux/uaccess.h> #include <asm/msr.h> -#include <asm/uaccess.h> #include <asm/processor.h> #include <asm/microcode.h> @@ -196,7 +196,7 @@ static inline int update_match_cpu(struct cpu_signature *csig, int sig, int pf) return (!sigmatch(sig, csig->sig, pf, csig->pf)) ? 0 : 1; } -static inline int +static inline int update_match_revision(struct microcode_header_intel *mc_header, int rev) { return (mc_header->rev <= rev) ? 0 : 1; @@ -442,8 +442,8 @@ static int request_microcode_fw(int cpu, struct device *device) return ret; } - ret = generic_load_microcode(cpu, (void*)firmware->data, firmware->size, - &get_ucode_fw); + ret = generic_load_microcode(cpu, (void *)firmware->data, + firmware->size, &get_ucode_fw); release_firmware(firmware); @@ -460,7 +460,7 @@ static int request_microcode_user(int cpu, const void __user *buf, size_t size) /* We should bind the task to the CPU */ BUG_ON(cpu != raw_smp_processor_id()); - return generic_load_microcode(cpu, (void*)buf, size, &get_ucode_user); + return generic_load_microcode(cpu, (void *)buf, size, &get_ucode_user); } static void microcode_fini_cpu(int cpu) diff --git a/arch/x86/kernel/module_32.c b/arch/x86/kernel/module_32.c index 3db0a5442eb..0edd819050e 100644 --- a/arch/x86/kernel/module_32.c +++ b/arch/x86/kernel/module_32.c @@ -42,7 +42,7 @@ void module_free(struct module *mod, void *module_region) { vfree(module_region); /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ + table entries. */ } /* We don't need anything special. */ @@ -113,13 +113,13 @@ int module_finalize(const Elf_Ehdr *hdr, *para = NULL; char *secstrings = (void *)hdr + sechdrs[hdr->e_shstrndx].sh_offset; - for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) { + for (s = sechdrs; s < sechdrs + hdr->e_shnum; s++) { if (!strcmp(".text", secstrings + s->sh_name)) text = s; if (!strcmp(".altinstructions", secstrings + s->sh_name)) alt = s; if (!strcmp(".smp_locks", secstrings + s->sh_name)) - locks= s; + locks = s; if (!strcmp(".parainstructions", secstrings + s->sh_name)) para = s; } diff --git a/arch/x86/kernel/module_64.c b/arch/x86/kernel/module_64.c index 6ba87830d4b..c23880b90b5 100644 --- a/arch/x86/kernel/module_64.c +++ b/arch/x86/kernel/module_64.c @@ -30,14 +30,14 @@ #include <asm/page.h> #include <asm/pgtable.h> -#define DEBUGP(fmt...) +#define DEBUGP(fmt...) #ifndef CONFIG_UML void module_free(struct module *mod, void *module_region) { vfree(module_region); /* FIXME: If module_region == mod->init_region, trim exception - table entries. */ + table entries. */ } void *module_alloc(unsigned long size) @@ -77,7 +77,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, Elf64_Rela *rel = (void *)sechdrs[relsec].sh_addr; Elf64_Sym *sym; void *loc; - u64 val; + u64 val; DEBUGP("Applying relocate section %u to %u\n", relsec, sechdrs[relsec].sh_info); @@ -91,11 +91,11 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, sym = (Elf64_Sym *)sechdrs[symindex].sh_addr + ELF64_R_SYM(rel[i].r_info); - DEBUGP("type %d st_value %Lx r_addend %Lx loc %Lx\n", - (int)ELF64_R_TYPE(rel[i].r_info), - sym->st_value, rel[i].r_addend, (u64)loc); + DEBUGP("type %d st_value %Lx r_addend %Lx loc %Lx\n", + (int)ELF64_R_TYPE(rel[i].r_info), + sym->st_value, rel[i].r_addend, (u64)loc); - val = sym->st_value + rel[i].r_addend; + val = sym->st_value + rel[i].r_addend; switch (ELF64_R_TYPE(rel[i].r_info)) { case R_X86_64_NONE: @@ -113,16 +113,16 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, if ((s64)val != *(s32 *)loc) goto overflow; break; - case R_X86_64_PC32: + case R_X86_64_PC32: val -= (u64)loc; *(u32 *)loc = val; #if 0 if ((s64)val != *(s32 *)loc) - goto overflow; + goto overflow; #endif break; default: - printk(KERN_ERR "module %s: Unknown rela relocation: %Lu\n", + printk(KERN_ERR "module %s: Unknown rela relocation: %llu\n", me->name, ELF64_R_TYPE(rel[i].r_info)); return -ENOEXEC; } @@ -130,7 +130,7 @@ int apply_relocate_add(Elf64_Shdr *sechdrs, return 0; overflow: - printk(KERN_ERR "overflow in relocation type %d val %Lx\n", + printk(KERN_ERR "overflow in relocation type %d val %Lx\n", (int)ELF64_R_TYPE(rel[i].r_info), val); printk(KERN_ERR "`%s' likely not compiled with -mcmodel=kernel\n", me->name); @@ -143,13 +143,13 @@ int apply_relocate(Elf_Shdr *sechdrs, unsigned int relsec, struct module *me) { - printk("non add relocation not supported\n"); + printk(KERN_ERR "non add relocation not supported\n"); return -ENOSYS; -} +} int module_finalize(const Elf_Ehdr *hdr, - const Elf_Shdr *sechdrs, - struct module *me) + const Elf_Shdr *sechdrs, + struct module *me) { const Elf_Shdr *s, *text = NULL, *alt = NULL, *locks = NULL, *para = NULL; @@ -161,7 +161,7 @@ int module_finalize(const Elf_Ehdr *hdr, if (!strcmp(".altinstructions", secstrings + s->sh_name)) alt = s; if (!strcmp(".smp_locks", secstrings + s->sh_name)) - locks= s; + locks = s; if (!strcmp(".parainstructions", secstrings + s->sh_name)) para = s; } diff --git a/arch/x86/kernel/mpparse.c b/arch/x86/kernel/mpparse.c index a649a4ccad4..fa6bb263892 100644 --- a/arch/x86/kernel/mpparse.c +++ b/arch/x86/kernel/mpparse.c @@ -144,11 +144,11 @@ static void __init MP_ioapic_info(struct mpc_ioapic *m) if (bad_ioapic(m->apicaddr)) return; - mp_ioapics[nr_ioapics].mp_apicaddr = m->apicaddr; - mp_ioapics[nr_ioapics].mp_apicid = m->apicid; - mp_ioapics[nr_ioapics].mp_type = m->type; - mp_ioapics[nr_ioapics].mp_apicver = m->apicver; - mp_ioapics[nr_ioapics].mp_flags = m->flags; + mp_ioapics[nr_ioapics].apicaddr = m->apicaddr; + mp_ioapics[nr_ioapics].apicid = m->apicid; + mp_ioapics[nr_ioapics].type = m->type; + mp_ioapics[nr_ioapics].apicver = m->apicver; + mp_ioapics[nr_ioapics].flags = m->flags; nr_ioapics++; } @@ -160,55 +160,55 @@ static void print_MP_intsrc_info(struct mpc_intsrc *m) m->srcbusirq, m->dstapic, m->dstirq); } -static void __init print_mp_irq_info(struct mp_config_intsrc *mp_irq) +static void __init print_mp_irq_info(struct mpc_intsrc *mp_irq) { apic_printk(APIC_VERBOSE, "Int: type %d, pol %d, trig %d, bus %02x," " IRQ %02x, APIC ID %x, APIC INT %02x\n", - mp_irq->mp_irqtype, mp_irq->mp_irqflag & 3, - (mp_irq->mp_irqflag >> 2) & 3, mp_irq->mp_srcbus, - mp_irq->mp_srcbusirq, mp_irq->mp_dstapic, mp_irq->mp_dstirq); + mp_irq->irqtype, mp_irq->irqflag & 3, + (mp_irq->irqflag >> 2) & 3, mp_irq->srcbus, + mp_irq->srcbusirq, mp_irq->dstapic, mp_irq->dstirq); } static void __init assign_to_mp_irq(struct mpc_intsrc *m, - struct mp_config_intsrc *mp_irq) + struct mpc_intsrc *mp_irq) { - mp_irq->mp_dstapic = m->dstapic; - mp_irq->mp_type = m->type; - mp_irq->mp_irqtype = m->irqtype; - mp_irq->mp_irqflag = m->irqflag; - mp_irq->mp_srcbus = m->srcbus; - mp_irq->mp_srcbusirq = m->srcbusirq; - mp_irq->mp_dstirq = m->dstirq; + mp_irq->dstapic = m->dstapic; + mp_irq->type = m->type; + mp_irq->irqtype = m->irqtype; + mp_irq->irqflag = m->irqflag; + mp_irq->srcbus = m->srcbus; + mp_irq->srcbusirq = m->srcbusirq; + mp_irq->dstirq = m->dstirq; } -static void __init assign_to_mpc_intsrc(struct mp_config_intsrc *mp_irq, +static void __init assign_to_mpc_intsrc(struct mpc_intsrc *mp_irq, struct mpc_intsrc *m) { - m->dstapic = mp_irq->mp_dstapic; - m->type = mp_irq->mp_type; - m->irqtype = mp_irq->mp_irqtype; - m->irqflag = mp_irq->mp_irqflag; - m->srcbus = mp_irq->mp_srcbus; - m->srcbusirq = mp_irq->mp_srcbusirq; - m->dstirq = mp_irq->mp_dstirq; + m->dstapic = mp_irq->dstapic; + m->type = mp_irq->type; + m->irqtype = mp_irq->irqtype; + m->irqflag = mp_irq->irqflag; + m->srcbus = mp_irq->srcbus; + m->srcbusirq = mp_irq->srcbusirq; + m->dstirq = mp_irq->dstirq; } -static int __init mp_irq_mpc_intsrc_cmp(struct mp_config_intsrc *mp_irq, +static int __init mp_irq_mpc_intsrc_cmp(struct mpc_intsrc *mp_irq, struct mpc_intsrc *m) { - if (mp_irq->mp_dstapic != m->dstapic) + if (mp_irq->dstapic != m->dstapic) return 1; - if (mp_irq->mp_type != m->type) + if (mp_irq->type != m->type) return 2; - if (mp_irq->mp_irqtype != m->irqtype) + if (mp_irq->irqtype != m->irqtype) return 3; - if (mp_irq->mp_irqflag != m->irqflag) + if (mp_irq->irqflag != m->irqflag) return 4; - if (mp_irq->mp_srcbus != m->srcbus) + if (mp_irq->srcbus != m->srcbus) return 5; - if (mp_irq->mp_srcbusirq != m->srcbusirq) + if (mp_irq->srcbusirq != m->srcbusirq) return 6; - if (mp_irq->mp_dstirq != m->dstirq) + if (mp_irq->dstirq != m->dstirq) return 7; return 0; @@ -417,7 +417,7 @@ static void __init construct_default_ioirq_mptable(int mpc_default_type) intsrc.type = MP_INTSRC; intsrc.irqflag = 0; /* conforming */ intsrc.srcbus = 0; - intsrc.dstapic = mp_ioapics[0].mp_apicid; + intsrc.dstapic = mp_ioapics[0].apicid; intsrc.irqtype = mp_INT; @@ -570,14 +570,14 @@ static inline void __init construct_default_ISA_mptable(int mpc_default_type) } } -static struct intel_mp_floating *mpf_found; +static struct mpf_intel *mpf_found; /* * Scan the memory blocks for an SMP configuration block. */ static void __init __get_smp_config(unsigned int early) { - struct intel_mp_floating *mpf = mpf_found; + struct mpf_intel *mpf = mpf_found; if (!mpf) return; @@ -598,9 +598,9 @@ static void __init __get_smp_config(unsigned int early) } printk(KERN_INFO "Intel MultiProcessor Specification v1.%d\n", - mpf->mpf_specification); + mpf->specification); #if defined(CONFIG_X86_LOCAL_APIC) && defined(CONFIG_X86_32) - if (mpf->mpf_feature2 & (1 << 7)) { + if (mpf->feature2 & (1 << 7)) { printk(KERN_INFO " IMCR and PIC compatibility mode.\n"); pic_mode = 1; } else { @@ -611,7 +611,7 @@ static void __init __get_smp_config(unsigned int early) /* * Now see if we need to read further. */ - if (mpf->mpf_feature1 != 0) { + if (mpf->feature1 != 0) { if (early) { /* * local APIC has default address @@ -621,16 +621,16 @@ static void __init __get_smp_config(unsigned int early) } printk(KERN_INFO "Default MP configuration #%d\n", - mpf->mpf_feature1); - construct_default_ISA_mptable(mpf->mpf_feature1); + mpf->feature1); + construct_default_ISA_mptable(mpf->feature1); - } else if (mpf->mpf_physptr) { + } else if (mpf->physptr) { /* * Read the physical hardware table. Anything here will * override the defaults. */ - if (!smp_read_mpc(phys_to_virt(mpf->mpf_physptr), early)) { + if (!smp_read_mpc(phys_to_virt(mpf->physptr), early)) { #ifdef CONFIG_X86_LOCAL_APIC smp_found_config = 0; #endif @@ -688,19 +688,19 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, unsigned reserve) { unsigned int *bp = phys_to_virt(base); - struct intel_mp_floating *mpf; + struct mpf_intel *mpf; apic_printk(APIC_VERBOSE, "Scan SMP from %p for %ld bytes.\n", bp, length); BUILD_BUG_ON(sizeof(*mpf) != 16); while (length > 0) { - mpf = (struct intel_mp_floating *)bp; + mpf = (struct mpf_intel *)bp; if ((*bp == SMP_MAGIC_IDENT) && - (mpf->mpf_length == 1) && + (mpf->length == 1) && !mpf_checksum((unsigned char *)bp, 16) && - ((mpf->mpf_specification == 1) - || (mpf->mpf_specification == 4))) { + ((mpf->specification == 1) + || (mpf->specification == 4))) { #ifdef CONFIG_X86_LOCAL_APIC smp_found_config = 1; #endif @@ -713,7 +713,7 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, return 1; reserve_bootmem_generic(virt_to_phys(mpf), PAGE_SIZE, BOOTMEM_DEFAULT); - if (mpf->mpf_physptr) { + if (mpf->physptr) { unsigned long size = PAGE_SIZE; #ifdef CONFIG_X86_32 /* @@ -722,14 +722,14 @@ static int __init smp_scan_config(unsigned long base, unsigned long length, * the bottom is mapped now. * PC-9800's MPC table places on the very last * of physical memory; so that simply reserving - * PAGE_SIZE from mpg->mpf_physptr yields BUG() + * PAGE_SIZE from mpf->physptr yields BUG() * in reserve_bootmem. */ unsigned long end = max_low_pfn * PAGE_SIZE; - if (mpf->mpf_physptr + size > end) - size = end - mpf->mpf_physptr; + if (mpf->physptr + size > end) + size = end - mpf->physptr; #endif - reserve_bootmem_generic(mpf->mpf_physptr, size, + reserve_bootmem_generic(mpf->physptr, size, BOOTMEM_DEFAULT); } @@ -809,15 +809,15 @@ static int __init get_MP_intsrc_index(struct mpc_intsrc *m) /* not legacy */ for (i = 0; i < mp_irq_entries; i++) { - if (mp_irqs[i].mp_irqtype != mp_INT) + if (mp_irqs[i].irqtype != mp_INT) continue; - if (mp_irqs[i].mp_irqflag != 0x0f) + if (mp_irqs[i].irqflag != 0x0f) continue; - if (mp_irqs[i].mp_srcbus != m->srcbus) + if (mp_irqs[i].srcbus != m->srcbus) continue; - if (mp_irqs[i].mp_srcbusirq != m->srcbusirq) + if (mp_irqs[i].srcbusirq != m->srcbusirq) continue; if (irq_used[i]) { /* already claimed */ @@ -922,10 +922,10 @@ static int __init replace_intsrc_all(struct mpc_table *mpc, if (irq_used[i]) continue; - if (mp_irqs[i].mp_irqtype != mp_INT) + if (mp_irqs[i].irqtype != mp_INT) continue; - if (mp_irqs[i].mp_irqflag != 0x0f) + if (mp_irqs[i].irqflag != 0x0f) continue; if (nr_m_spare > 0) { @@ -1001,7 +1001,7 @@ static int __init update_mp_table(void) { char str[16]; char oem[10]; - struct intel_mp_floating *mpf; + struct mpf_intel *mpf; struct mpc_table *mpc, *mpc_new; if (!enable_update_mptable) @@ -1014,19 +1014,19 @@ static int __init update_mp_table(void) /* * Now see if we need to go further. */ - if (mpf->mpf_feature1 != 0) + if (mpf->feature1 != 0) return 0; - if (!mpf->mpf_physptr) + if (!mpf->physptr) return 0; - mpc = phys_to_virt(mpf->mpf_physptr); + mpc = phys_to_virt(mpf->physptr); if (!smp_check_mpc(mpc, oem, str)) return 0; printk(KERN_INFO "mpf: %lx\n", virt_to_phys(mpf)); - printk(KERN_INFO "mpf_physptr: %x\n", mpf->mpf_physptr); + printk(KERN_INFO "physptr: %x\n", mpf->physptr); if (mpc_new_phys && mpc->length > mpc_new_length) { mpc_new_phys = 0; @@ -1047,23 +1047,23 @@ static int __init update_mp_table(void) } printk(KERN_INFO "use in-positon replacing\n"); } else { - mpf->mpf_physptr = mpc_new_phys; + mpf->physptr = mpc_new_phys; mpc_new = phys_to_virt(mpc_new_phys); memcpy(mpc_new, mpc, mpc->length); mpc = mpc_new; /* check if we can modify that */ - if (mpc_new_phys - mpf->mpf_physptr) { - struct intel_mp_floating *mpf_new; + if (mpc_new_phys - mpf->physptr) { + struct mpf_intel *mpf_new; /* steal 16 bytes from [0, 1k) */ printk(KERN_INFO "mpf new: %x\n", 0x400 - 16); mpf_new = phys_to_virt(0x400 - 16); memcpy(mpf_new, mpf, 16); mpf = mpf_new; - mpf->mpf_physptr = mpc_new_phys; + mpf->physptr = mpc_new_phys; } - mpf->mpf_checksum = 0; - mpf->mpf_checksum -= mpf_checksum((unsigned char *)mpf, 16); - printk(KERN_INFO "mpf_physptr new: %x\n", mpf->mpf_physptr); + mpf->checksum = 0; + mpf->checksum -= mpf_checksum((unsigned char *)mpf, 16); + printk(KERN_INFO "physptr new: %x\n", mpf->physptr); } /* diff --git a/arch/x86/kernel/msr.c b/arch/x86/kernel/msr.c index 726266695b2..3cf3413ec62 100644 --- a/arch/x86/kernel/msr.c +++ b/arch/x86/kernel/msr.c @@ -35,10 +35,10 @@ #include <linux/device.h> #include <linux/cpu.h> #include <linux/notifier.h> +#include <linux/uaccess.h> #include <asm/processor.h> #include <asm/msr.h> -#include <asm/uaccess.h> #include <asm/system.h> static struct class *msr_class; diff --git a/arch/x86/kernel/nmi.c b/arch/x86/kernel/nmi.c index 7228979f1e7..23b6d9e6e4f 100644 --- a/arch/x86/kernel/nmi.c +++ b/arch/x86/kernel/nmi.c @@ -61,11 +61,7 @@ static int endflag __initdata; static inline unsigned int get_nmi_count(int cpu) { -#ifdef CONFIG_X86_64 - return cpu_pda(cpu)->__nmi_count; -#else - return nmi_count(cpu); -#endif + return per_cpu(irq_stat, cpu).__nmi_count; } static inline int mce_in_progress(void) @@ -82,12 +78,8 @@ static inline int mce_in_progress(void) */ static inline unsigned int get_timer_irqs(int cpu) { -#ifdef CONFIG_X86_64 - return read_pda(apic_timer_irqs) + read_pda(irq0_irqs); -#else return per_cpu(irq_stat, cpu).apic_timer_irqs + per_cpu(irq_stat, cpu).irq0_irqs; -#endif } #ifdef CONFIG_SMP diff --git a/arch/x86/kernel/paravirt-spinlocks.c b/arch/x86/kernel/paravirt-spinlocks.c index 95777b0faa7..3a7c5a44082 100644 --- a/arch/x86/kernel/paravirt-spinlocks.c +++ b/arch/x86/kernel/paravirt-spinlocks.c @@ -26,13 +26,3 @@ struct pv_lock_ops pv_lock_ops = { }; EXPORT_SYMBOL(pv_lock_ops); -void __init paravirt_use_bytelocks(void) -{ -#ifdef CONFIG_SMP - pv_lock_ops.spin_is_locked = __byte_spin_is_locked; - pv_lock_ops.spin_is_contended = __byte_spin_is_contended; - pv_lock_ops.spin_lock = __byte_spin_lock; - pv_lock_ops.spin_trylock = __byte_spin_trylock; - pv_lock_ops.spin_unlock = __byte_spin_unlock; -#endif -} diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c index e4c8fb60887..202514be592 100644 --- a/arch/x86/kernel/paravirt.c +++ b/arch/x86/kernel/paravirt.c @@ -435,7 +435,6 @@ struct pv_mmu_ops pv_mmu_ops = { #endif /* PAGETABLE_LEVELS >= 3 */ .pte_val = native_pte_val, - .pte_flags = native_pte_flags, .pgd_val = native_pgd_val, .make_pte = native_make_pte, diff --git a/arch/x86/kernel/process_32.c b/arch/x86/kernel/process_32.c index a546f55c77b..1a1ae8edc40 100644 --- a/arch/x86/kernel/process_32.c +++ b/arch/x86/kernel/process_32.c @@ -66,9 +66,6 @@ asmlinkage void ret_from_fork(void) __asm__("ret_from_fork"); DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task; EXPORT_PER_CPU_SYMBOL(current_task); -DEFINE_PER_CPU(int, cpu_number); -EXPORT_PER_CPU_SYMBOL(cpu_number); - /* * Return saved PC of a blocked thread. */ @@ -111,7 +108,6 @@ void cpu_idle(void) play_dead(); local_irq_disable(); - __get_cpu_var(irq_stat).idle_timestamp = jiffies; /* Don't trace irqs off for idle */ stop_critical_timings(); pm_idle(); @@ -591,7 +587,7 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) if (prev->gs | next->gs) loadsegment(gs, next->gs); - x86_write_percpu(current_task, next_p); + percpu_write(current_task, next_p); return prev_p; } diff --git a/arch/x86/kernel/process_64.c b/arch/x86/kernel/process_64.c index 416fb9282f4..c422eebb0c5 100644 --- a/arch/x86/kernel/process_64.c +++ b/arch/x86/kernel/process_64.c @@ -16,6 +16,7 @@ #include <stdarg.h> +#include <linux/stackprotector.h> #include <linux/cpu.h> #include <linux/errno.h> #include <linux/sched.h> @@ -46,7 +47,6 @@ #include <asm/processor.h> #include <asm/i387.h> #include <asm/mmu_context.h> -#include <asm/pda.h> #include <asm/prctl.h> #include <asm/desc.h> #include <asm/proto.h> @@ -57,6 +57,12 @@ asmlinkage extern void ret_from_fork(void); +DEFINE_PER_CPU(struct task_struct *, current_task) = &init_task; +EXPORT_PER_CPU_SYMBOL(current_task); + +DEFINE_PER_CPU(unsigned long, old_rsp); +static DEFINE_PER_CPU(unsigned char, is_idle); + unsigned long kernel_thread_flags = CLONE_VM | CLONE_UNTRACED; static ATOMIC_NOTIFIER_HEAD(idle_notifier); @@ -75,13 +81,13 @@ EXPORT_SYMBOL_GPL(idle_notifier_unregister); void enter_idle(void) { - write_pda(isidle, 1); + percpu_write(is_idle, 1); atomic_notifier_call_chain(&idle_notifier, IDLE_START, NULL); } static void __exit_idle(void) { - if (test_and_clear_bit_pda(0, isidle) == 0) + if (x86_test_and_clear_bit_percpu(0, is_idle) == 0) return; atomic_notifier_call_chain(&idle_notifier, IDLE_END, NULL); } @@ -111,6 +117,17 @@ static inline void play_dead(void) void cpu_idle(void) { current_thread_info()->status |= TS_POLLING; + + /* + * If we're the non-boot CPU, nothing set the PDA stack + * canary up for us - and if we are the boot CPU we have + * a 0 stack canary. This is a good place for updating + * it, as we wont ever return from this function (so the + * invalid canaries already on the stack wont ever + * trigger): + */ + boot_init_stack_canary(); + /* endless idle loop with no priority at all */ while (1) { tick_nohz_stop_sched_tick(1); @@ -392,7 +409,7 @@ start_thread(struct pt_regs *regs, unsigned long new_ip, unsigned long new_sp) load_gs_index(0); regs->ip = new_ip; regs->sp = new_sp; - write_pda(oldrsp, new_sp); + percpu_write(old_rsp, new_sp); regs->cs = __USER_CS; regs->ss = __USER_DS; regs->flags = 0x200; @@ -613,21 +630,13 @@ __switch_to(struct task_struct *prev_p, struct task_struct *next_p) /* * Switch the PDA and FPU contexts. */ - prev->usersp = read_pda(oldrsp); - write_pda(oldrsp, next->usersp); - write_pda(pcurrent, next_p); + prev->usersp = percpu_read(old_rsp); + percpu_write(old_rsp, next->usersp); + percpu_write(current_task, next_p); - write_pda(kernelstack, + percpu_write(kernel_stack, (unsigned long)task_stack_page(next_p) + - THREAD_SIZE - PDA_STACKOFFSET); -#ifdef CONFIG_CC_STACKPROTECTOR - write_pda(stack_canary, next_p->stack_canary); - /* - * Build time only check to make sure the stack_canary is at - * offset 40 in the pda; this is a gcc ABI requirement - */ - BUILD_BUG_ON(offsetof(struct x8664_pda, stack_canary) != 40); -#endif + THREAD_SIZE - KERNEL_STACK_OFFSET); /* * Now maybe reload the debug registers and handle I/O bitmaps diff --git a/arch/x86/kernel/reboot.c b/arch/x86/kernel/reboot.c index 2b46eb41643..f8536fee5c1 100644 --- a/arch/x86/kernel/reboot.c +++ b/arch/x86/kernel/reboot.c @@ -14,6 +14,7 @@ #include <asm/reboot.h> #include <asm/pci_x86.h> #include <asm/virtext.h> +#include <asm/cpu.h> #ifdef CONFIG_X86_32 # include <linux/dmi.h> diff --git a/arch/x86/kernel/setup.c b/arch/x86/kernel/setup.c index ae0d8042cf6..f41c4486c27 100644 --- a/arch/x86/kernel/setup.c +++ b/arch/x86/kernel/setup.c @@ -89,7 +89,7 @@ #include <asm/system.h> #include <asm/vsyscall.h> -#include <asm/smp.h> +#include <asm/cpu.h> #include <asm/desc.h> #include <asm/dma.h> #include <asm/iommu.h> diff --git a/arch/x86/kernel/setup_percpu.c b/arch/x86/kernel/setup_percpu.c index 55c46074eba..0d1e7ac439f 100644 --- a/arch/x86/kernel/setup_percpu.c +++ b/arch/x86/kernel/setup_percpu.c @@ -13,145 +13,46 @@ #include <asm/mpspec.h> #include <asm/apicdef.h> #include <asm/highmem.h> +#include <asm/proto.h> +#include <asm/cpumask.h> +#include <asm/cpu.h> -#ifdef CONFIG_X86_LOCAL_APIC -unsigned int num_processors; -unsigned disabled_cpus __cpuinitdata; -/* Processor that is doing the boot up */ -unsigned int boot_cpu_physical_apicid = -1U; -EXPORT_SYMBOL(boot_cpu_physical_apicid); -unsigned int max_physical_apicid; - -/* Bitmask of physically existing CPUs */ -physid_mask_t phys_cpu_present_map; -#endif - -/* map cpu index to physical APIC ID */ -DEFINE_EARLY_PER_CPU(u16, x86_cpu_to_apicid, BAD_APICID); -DEFINE_EARLY_PER_CPU(u16, x86_bios_cpu_apicid, BAD_APICID); -EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_apicid); -EXPORT_EARLY_PER_CPU_SYMBOL(x86_bios_cpu_apicid); - -#if defined(CONFIG_NUMA) && defined(CONFIG_X86_64) -#define X86_64_NUMA 1 - -/* map cpu index to node index */ -DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE); -EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map); - -/* which logical CPUs are on which nodes */ -cpumask_t *node_to_cpumask_map; -EXPORT_SYMBOL(node_to_cpumask_map); - -/* setup node_to_cpumask_map */ -static void __init setup_node_to_cpumask_map(void); - +#ifdef CONFIG_DEBUG_PER_CPU_MAPS +# define DBG(x...) printk(KERN_DEBUG x) #else -static inline void setup_node_to_cpumask_map(void) { } +# define DBG(x...) #endif -#if defined(CONFIG_HAVE_SETUP_PER_CPU_AREA) && defined(CONFIG_X86_SMP) -/* - * Copy data used in early init routines from the initial arrays to the - * per cpu data areas. These arrays then become expendable and the - * *_early_ptr's are zeroed indicating that the static arrays are gone. - */ -static void __init setup_per_cpu_maps(void) -{ - int cpu; +DEFINE_PER_CPU(int, cpu_number); +EXPORT_PER_CPU_SYMBOL(cpu_number); - for_each_possible_cpu(cpu) { - per_cpu(x86_cpu_to_apicid, cpu) = - early_per_cpu_map(x86_cpu_to_apicid, cpu); - per_cpu(x86_bios_cpu_apicid, cpu) = - early_per_cpu_map(x86_bios_cpu_apicid, cpu); -#ifdef X86_64_NUMA - per_cpu(x86_cpu_to_node_map, cpu) = - early_per_cpu_map(x86_cpu_to_node_map, cpu); +#ifdef CONFIG_X86_64 +#define BOOT_PERCPU_OFFSET ((unsigned long)__per_cpu_load) +#else +#define BOOT_PERCPU_OFFSET 0 #endif - } - /* indicate the early static arrays will soon be gone */ - early_per_cpu_ptr(x86_cpu_to_apicid) = NULL; - early_per_cpu_ptr(x86_bios_cpu_apicid) = NULL; -#ifdef X86_64_NUMA - early_per_cpu_ptr(x86_cpu_to_node_map) = NULL; -#endif -} +DEFINE_PER_CPU(unsigned long, this_cpu_off) = BOOT_PERCPU_OFFSET; +EXPORT_PER_CPU_SYMBOL(this_cpu_off); -#ifdef CONFIG_X86_32 -/* - * Great future not-so-futuristic plan: make i386 and x86_64 do it - * the same way - */ -unsigned long __per_cpu_offset[NR_CPUS] __read_mostly; +unsigned long __per_cpu_offset[NR_CPUS] __read_mostly = { + [0 ... NR_CPUS-1] = BOOT_PERCPU_OFFSET, +}; EXPORT_SYMBOL(__per_cpu_offset); -static inline void setup_cpu_pda_map(void) { } - -#elif !defined(CONFIG_SMP) -static inline void setup_cpu_pda_map(void) { } - -#else /* CONFIG_SMP && CONFIG_X86_64 */ - -/* - * Allocate cpu_pda pointer table and array via alloc_bootmem. - */ -static void __init setup_cpu_pda_map(void) -{ - char *pda; - struct x8664_pda **new_cpu_pda; - unsigned long size; - int cpu; - - size = roundup(sizeof(struct x8664_pda), cache_line_size()); - - /* allocate cpu_pda array and pointer table */ - { - unsigned long tsize = nr_cpu_ids * sizeof(void *); - unsigned long asize = size * (nr_cpu_ids - 1); - tsize = roundup(tsize, cache_line_size()); - new_cpu_pda = alloc_bootmem(tsize + asize); - pda = (char *)new_cpu_pda + tsize; - } - - /* initialize pointer table to static pda's */ - for_each_possible_cpu(cpu) { - if (cpu == 0) { - /* leave boot cpu pda in place */ - new_cpu_pda[0] = cpu_pda(0); - continue; - } - new_cpu_pda[cpu] = (struct x8664_pda *)pda; - new_cpu_pda[cpu]->in_bootmem = 1; - pda += size; - } - - /* point to new pointer table */ - _cpu_pda = new_cpu_pda; -} - -#endif /* CONFIG_SMP && CONFIG_X86_64 */ - -#ifdef CONFIG_X86_64 - -/* correctly size the local cpu masks */ -static void setup_cpu_local_masks(void) +static inline void setup_percpu_segment(int cpu) { - alloc_bootmem_cpumask_var(&cpu_initialized_mask); - alloc_bootmem_cpumask_var(&cpu_callin_mask); - alloc_bootmem_cpumask_var(&cpu_callout_mask); - alloc_bootmem_cpumask_var(&cpu_sibling_setup_mask); -} - -#else /* CONFIG_X86_32 */ +#ifdef CONFIG_X86_32 + struct desc_struct gdt; -static inline void setup_cpu_local_masks(void) -{ + pack_descriptor(&gdt, per_cpu_offset(cpu), 0xFFFFF, + 0x2 | DESCTYPE_S, 0x8); + gdt.s = 1; + write_gdt_entry(get_cpu_gdt_table(cpu), + GDT_ENTRY_PERCPU, &gdt, DESCTYPE_S); +#endif } -#endif /* CONFIG_X86_32 */ - /* * Great future plan: * Declare PDA itself and support (irqstack,tss,pgd) as per cpu data. @@ -159,18 +60,12 @@ static inline void setup_cpu_local_masks(void) */ void __init setup_per_cpu_areas(void) { - ssize_t size, old_size; + ssize_t size; char *ptr; int cpu; - unsigned long align = 1; - - /* Setup cpu_pda map */ - setup_cpu_pda_map(); /* Copy section for each CPU (we discard the original) */ - old_size = PERCPU_ENOUGH_ROOM; - align = max_t(unsigned long, PAGE_SIZE, align); - size = roundup(old_size, align); + size = roundup(PERCPU_ENOUGH_ROOM, PAGE_SIZE); pr_info("NR_CPUS:%d nr_cpumask_bits:%d nr_cpu_ids:%d nr_node_ids:%d\n", NR_CPUS, nr_cpumask_bits, nr_cpu_ids, nr_node_ids); @@ -179,30 +74,67 @@ void __init setup_per_cpu_areas(void) for_each_possible_cpu(cpu) { #ifndef CONFIG_NEED_MULTIPLE_NODES - ptr = __alloc_bootmem(size, align, - __pa(MAX_DMA_ADDRESS)); + ptr = alloc_bootmem_pages(size); #else int node = early_cpu_to_node(cpu); if (!node_online(node) || !NODE_DATA(node)) { - ptr = __alloc_bootmem(size, align, - __pa(MAX_DMA_ADDRESS)); + ptr = alloc_bootmem_pages(size); pr_info("cpu %d has no node %d or node-local memory\n", cpu, node); pr_debug("per cpu data for cpu%d at %016lx\n", cpu, __pa(ptr)); } else { - ptr = __alloc_bootmem_node(NODE_DATA(node), size, align, - __pa(MAX_DMA_ADDRESS)); + ptr = alloc_bootmem_pages_node(NODE_DATA(node), size); pr_debug("per cpu data for cpu%d on node%d at %016lx\n", cpu, node, __pa(ptr)); } #endif + + memcpy(ptr, __per_cpu_load, __per_cpu_end - __per_cpu_start); per_cpu_offset(cpu) = ptr - __per_cpu_start; - memcpy(ptr, __per_cpu_start, __per_cpu_end - __per_cpu_start); + per_cpu(this_cpu_off, cpu) = per_cpu_offset(cpu); + per_cpu(cpu_number, cpu) = cpu; + setup_percpu_segment(cpu); + /* + * Copy data used in early init routines from the + * initial arrays to the per cpu data areas. These + * arrays then become expendable and the *_early_ptr's + * are zeroed indicating that the static arrays are + * gone. + */ +#ifdef CONFIG_X86_LOCAL_APIC + per_cpu(x86_cpu_to_apicid, cpu) = + early_per_cpu_map(x86_cpu_to_apicid, cpu); + per_cpu(x86_bios_cpu_apicid, cpu) = + early_per_cpu_map(x86_bios_cpu_apicid, cpu); +#endif +#ifdef CONFIG_X86_64 + per_cpu(irq_stack_ptr, cpu) = + per_cpu(irq_stack_union.irq_stack, cpu) + + IRQ_STACK_SIZE - 64; +#ifdef CONFIG_NUMA + per_cpu(x86_cpu_to_node_map, cpu) = + early_per_cpu_map(x86_cpu_to_node_map, cpu); +#endif +#endif + /* + * Up to this point, the boot CPU has been using .data.init + * area. Reload any changed state for the boot CPU. + */ + if (cpu == boot_cpu_id) + switch_to_new_gdt(); + + DBG("PERCPU: cpu %4d %p\n", cpu, ptr); } - /* Setup percpu data maps */ - setup_per_cpu_maps(); + /* indicate the early static arrays will soon be gone */ +#ifdef CONFIG_X86_LOCAL_APIC + early_per_cpu_ptr(x86_cpu_to_apicid) = NULL; + early_per_cpu_ptr(x86_bios_cpu_apicid) = NULL; +#endif +#if defined(CONFIG_X86_64) && defined(CONFIG_NUMA) + early_per_cpu_ptr(x86_cpu_to_node_map) = NULL; +#endif /* Setup node to cpumask map */ setup_node_to_cpumask_map(); @@ -210,199 +142,3 @@ void __init setup_per_cpu_areas(void) /* Setup cpu initialized, callin, callout masks */ setup_cpu_local_masks(); } - -#endif - -#ifdef X86_64_NUMA - -/* - * Allocate node_to_cpumask_map based on number of available nodes - * Requires node_possible_map to be valid. - * - * Note: node_to_cpumask() is not valid until after this is done. - */ -static void __init setup_node_to_cpumask_map(void) -{ - unsigned int node, num = 0; - cpumask_t *map; - - /* setup nr_node_ids if not done yet */ - if (nr_node_ids == MAX_NUMNODES) { - for_each_node_mask(node, node_possible_map) - num = node; - nr_node_ids = num + 1; - } - - /* allocate the map */ - map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t)); - - pr_debug("Node to cpumask map at %p for %d nodes\n", - map, nr_node_ids); - - /* node_to_cpumask() will now work */ - node_to_cpumask_map = map; -} - -void __cpuinit numa_set_node(int cpu, int node) -{ - int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map); - - if (cpu_pda(cpu) && node != NUMA_NO_NODE) - cpu_pda(cpu)->nodenumber = node; - - if (cpu_to_node_map) - cpu_to_node_map[cpu] = node; - - else if (per_cpu_offset(cpu)) - per_cpu(x86_cpu_to_node_map, cpu) = node; - - else - pr_debug("Setting node for non-present cpu %d\n", cpu); -} - -void __cpuinit numa_clear_node(int cpu) -{ - numa_set_node(cpu, NUMA_NO_NODE); -} - -#ifndef CONFIG_DEBUG_PER_CPU_MAPS - -void __cpuinit numa_add_cpu(int cpu) -{ - cpu_set(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]); -} - -void __cpuinit numa_remove_cpu(int cpu) -{ - cpu_clear(cpu, node_to_cpumask_map[cpu_to_node(cpu)]); -} - -#else /* CONFIG_DEBUG_PER_CPU_MAPS */ - -/* - * --------- debug versions of the numa functions --------- - */ -static void __cpuinit numa_set_cpumask(int cpu, int enable) -{ - int node = cpu_to_node(cpu); - cpumask_t *mask; - char buf[64]; - - if (node_to_cpumask_map == NULL) { - printk(KERN_ERR "node_to_cpumask_map NULL\n"); - dump_stack(); - return; - } - - mask = &node_to_cpumask_map[node]; - if (enable) - cpu_set(cpu, *mask); - else - cpu_clear(cpu, *mask); - - cpulist_scnprintf(buf, sizeof(buf), mask); - printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n", - enable ? "numa_add_cpu" : "numa_remove_cpu", cpu, node, buf); -} - -void __cpuinit numa_add_cpu(int cpu) -{ - numa_set_cpumask(cpu, 1); -} - -void __cpuinit numa_remove_cpu(int cpu) -{ - numa_set_cpumask(cpu, 0); -} - -int cpu_to_node(int cpu) -{ - if (early_per_cpu_ptr(x86_cpu_to_node_map)) { - printk(KERN_WARNING - "cpu_to_node(%d): usage too early!\n", cpu); - dump_stack(); - return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu]; - } - return per_cpu(x86_cpu_to_node_map, cpu); -} -EXPORT_SYMBOL(cpu_to_node); - -/* - * Same function as cpu_to_node() but used if called before the - * per_cpu areas are setup. - */ -int early_cpu_to_node(int cpu) -{ - if (early_per_cpu_ptr(x86_cpu_to_node_map)) - return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu]; - - if (!per_cpu_offset(cpu)) { - printk(KERN_WARNING - "early_cpu_to_node(%d): no per_cpu area!\n", cpu); - dump_stack(); - return NUMA_NO_NODE; - } - return per_cpu(x86_cpu_to_node_map, cpu); -} - - -/* empty cpumask */ -static const cpumask_t cpu_mask_none; - -/* - * Returns a pointer to the bitmask of CPUs on Node 'node'. - */ -const cpumask_t *cpumask_of_node(int node) -{ - if (node_to_cpumask_map == NULL) { - printk(KERN_WARNING - "cpumask_of_node(%d): no node_to_cpumask_map!\n", - node); - dump_stack(); - return (const cpumask_t *)&cpu_online_map; - } - if (node >= nr_node_ids) { - printk(KERN_WARNING - "cpumask_of_node(%d): node > nr_node_ids(%d)\n", - node, nr_node_ids); - dump_stack(); - return &cpu_mask_none; - } - return &node_to_cpumask_map[node]; -} -EXPORT_SYMBOL(cpumask_of_node); - -/* - * Returns a bitmask of CPUs on Node 'node'. - * - * Side note: this function creates the returned cpumask on the stack - * so with a high NR_CPUS count, excessive stack space is used. The - * node_to_cpumask_ptr function should be used whenever possible. - */ -cpumask_t node_to_cpumask(int node) -{ - if (node_to_cpumask_map == NULL) { - printk(KERN_WARNING - "node_to_cpumask(%d): no node_to_cpumask_map!\n", node); - dump_stack(); - return cpu_online_map; - } - if (node >= nr_node_ids) { - printk(KERN_WARNING - "node_to_cpumask(%d): node > nr_node_ids(%d)\n", - node, nr_node_ids); - dump_stack(); - return cpu_mask_none; - } - return node_to_cpumask_map[node]; -} -EXPORT_SYMBOL(node_to_cpumask); - -/* - * --------- end of debug versions of the numa functions --------- - */ - -#endif /* CONFIG_DEBUG_PER_CPU_MAPS */ - -#endif /* X86_64_NUMA */ - diff --git a/arch/x86/kernel/signal.c b/arch/x86/kernel/signal.c index 89bb7668041..7fc78b01981 100644 --- a/arch/x86/kernel/signal.c +++ b/arch/x86/kernel/signal.c @@ -51,24 +51,24 @@ #endif #define COPY(x) { \ - err |= __get_user(regs->x, &sc->x); \ + get_user_ex(regs->x, &sc->x); \ } #define COPY_SEG(seg) { \ unsigned short tmp; \ - err |= __get_user(tmp, &sc->seg); \ + get_user_ex(tmp, &sc->seg); \ regs->seg = tmp; \ } #define COPY_SEG_CPL3(seg) { \ unsigned short tmp; \ - err |= __get_user(tmp, &sc->seg); \ + get_user_ex(tmp, &sc->seg); \ regs->seg = tmp | 3; \ } #define GET_SEG(seg) { \ unsigned short tmp; \ - err |= __get_user(tmp, &sc->seg); \ + get_user_ex(tmp, &sc->seg); \ loadsegment(seg, tmp); \ } @@ -83,45 +83,49 @@ restore_sigcontext(struct pt_regs *regs, struct sigcontext __user *sc, /* Always make any pending restarted system calls return -EINTR */ current_thread_info()->restart_block.fn = do_no_restart_syscall; + get_user_try { + #ifdef CONFIG_X86_32 - GET_SEG(gs); - COPY_SEG(fs); - COPY_SEG(es); - COPY_SEG(ds); + GET_SEG(gs); + COPY_SEG(fs); + COPY_SEG(es); + COPY_SEG(ds); #endif /* CONFIG_X86_32 */ - COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx); - COPY(dx); COPY(cx); COPY(ip); + COPY(di); COPY(si); COPY(bp); COPY(sp); COPY(bx); + COPY(dx); COPY(cx); COPY(ip); #ifdef CONFIG_X86_64 - COPY(r8); - COPY(r9); - COPY(r10); - COPY(r11); - COPY(r12); - COPY(r13); - COPY(r14); - COPY(r15); + COPY(r8); + COPY(r9); + COPY(r10); + COPY(r11); + COPY(r12); + COPY(r13); + COPY(r14); + COPY(r15); #endif /* CONFIG_X86_64 */ #ifdef CONFIG_X86_32 - COPY_SEG_CPL3(cs); - COPY_SEG_CPL3(ss); + COPY_SEG_CPL3(cs); + COPY_SEG_CPL3(ss); #else /* !CONFIG_X86_32 */ - /* Kernel saves and restores only the CS segment register on signals, - * which is the bare minimum needed to allow mixed 32/64-bit code. - * App's signal handler can save/restore other segments if needed. */ - COPY_SEG_CPL3(cs); + /* Kernel saves and restores only the CS segment register on signals, + * which is the bare minimum needed to allow mixed 32/64-bit code. + * App's signal handler can save/restore other segments if needed. */ + COPY_SEG_CPL3(cs); #endif /* CONFIG_X86_32 */ - err |= __get_user(tmpflags, &sc->flags); - regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS); - regs->orig_ax = -1; /* disable syscall checks */ + get_user_ex(tmpflags, &sc->flags); + regs->flags = (regs->flags & ~FIX_EFLAGS) | (tmpflags & FIX_EFLAGS); + regs->orig_ax = -1; /* disable syscall checks */ + + get_user_ex(buf, &sc->fpstate); + err |= restore_i387_xstate(buf); - err |= __get_user(buf, &sc->fpstate); - err |= restore_i387_xstate(buf); + get_user_ex(*pax, &sc->ax); + } get_user_catch(err); - err |= __get_user(*pax, &sc->ax); return err; } @@ -131,57 +135,60 @@ setup_sigcontext(struct sigcontext __user *sc, void __user *fpstate, { int err = 0; + put_user_try { + #ifdef CONFIG_X86_32 - { - unsigned int tmp; + { + unsigned int tmp; - savesegment(gs, tmp); - err |= __put_user(tmp, (unsigned int __user *)&sc->gs); - } - err |= __put_user(regs->fs, (unsigned int __user *)&sc->fs); - err |= __put_user(regs->es, (unsigned int __user *)&sc->es); - err |= __put_user(regs->ds, (unsigned int __user *)&sc->ds); + savesegment(gs, tmp); + put_user_ex(tmp, (unsigned int __user *)&sc->gs); + } + put_user_ex(regs->fs, (unsigned int __user *)&sc->fs); + put_user_ex(regs->es, (unsigned int __user *)&sc->es); + put_user_ex(regs->ds, (unsigned int __user *)&sc->ds); #endif /* CONFIG_X86_32 */ - err |= __put_user(regs->di, &sc->di); - err |= __put_user(regs->si, &sc->si); - err |= __put_user(regs->bp, &sc->bp); - err |= __put_user(regs->sp, &sc->sp); - err |= __put_user(regs->bx, &sc->bx); - err |= __put_user(regs->dx, &sc->dx); - err |= __put_user(regs->cx, &sc->cx); - err |= __put_user(regs->ax, &sc->ax); + put_user_ex(regs->di, &sc->di); + put_user_ex(regs->si, &sc->si); + put_user_ex(regs->bp, &sc->bp); + put_user_ex(regs->sp, &sc->sp); + put_user_ex(regs->bx, &sc->bx); + put_user_ex(regs->dx, &sc->dx); + put_user_ex(regs->cx, &sc->cx); + put_user_ex(regs->ax, &sc->ax); #ifdef CONFIG_X86_64 - err |= __put_user(regs->r8, &sc->r8); - err |= __put_user(regs->r9, &sc->r9); - err |= __put_user(regs->r10, &sc->r10); - err |= __put_user(regs->r11, &sc->r11); - err |= __put_user(regs->r12, &sc->r12); - err |= __put_user(regs->r13, &sc->r13); - err |= __put_user(regs->r14, &sc->r14); - err |= __put_user(regs->r15, &sc->r15); + put_user_ex(regs->r8, &sc->r8); + put_user_ex(regs->r9, &sc->r9); + put_user_ex(regs->r10, &sc->r10); + put_user_ex(regs->r11, &sc->r11); + put_user_ex(regs->r12, &sc->r12); + put_user_ex(regs->r13, &sc->r13); + put_user_ex(regs->r14, &sc->r14); + put_user_ex(regs->r15, &sc->r15); #endif /* CONFIG_X86_64 */ - err |= __put_user(current->thread.trap_no, &sc->trapno); - err |= __put_user(current->thread.error_code, &sc->err); - err |= __put_user(regs->ip, &sc->ip); + put_user_ex(current->thread.trap_no, &sc->trapno); + put_user_ex(current->thread.error_code, &sc->err); + put_user_ex(regs->ip, &sc->ip); #ifdef CONFIG_X86_32 - err |= __put_user(regs->cs, (unsigned int __user *)&sc->cs); - err |= __put_user(regs->flags, &sc->flags); - err |= __put_user(regs->sp, &sc->sp_at_signal); - err |= __put_user(regs->ss, (unsigned int __user *)&sc->ss); + put_user_ex(regs->cs, (unsigned int __user *)&sc->cs); + put_user_ex(regs->flags, &sc->flags); + put_user_ex(regs->sp, &sc->sp_at_signal); + put_user_ex(regs->ss, (unsigned int __user *)&sc->ss); #else /* !CONFIG_X86_32 */ - err |= __put_user(regs->flags, &sc->flags); - err |= __put_user(regs->cs, &sc->cs); - err |= __put_user(0, &sc->gs); - err |= __put_user(0, &sc->fs); + put_user_ex(regs->flags, &sc->flags); + put_user_ex(regs->cs, &sc->cs); + put_user_ex(0, &sc->gs); + put_user_ex(0, &sc->fs); #endif /* CONFIG_X86_32 */ - err |= __put_user(fpstate, &sc->fpstate); + put_user_ex(fpstate, &sc->fpstate); - /* non-iBCS2 extensions.. */ - err |= __put_user(mask, &sc->oldmask); - err |= __put_user(current->thread.cr2, &sc->cr2); + /* non-iBCS2 extensions.. */ + put_user_ex(mask, &sc->oldmask); + put_user_ex(current->thread.cr2, &sc->cr2); + } put_user_catch(err); return err; } @@ -336,43 +343,41 @@ static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, if (!access_ok(VERIFY_WRITE, frame, sizeof(*frame))) return -EFAULT; - err |= __put_user(sig, &frame->sig); - err |= __put_user(&frame->info, &frame->pinfo); - err |= __put_user(&frame->uc, &frame->puc); - err |= copy_siginfo_to_user(&frame->info, info); - if (err) - return -EFAULT; - - /* Create the ucontext. */ - if (cpu_has_xsave) - err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags); - else - err |= __put_user(0, &frame->uc.uc_flags); - err |= __put_user(0, &frame->uc.uc_link); - err |= __put_user(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); - err |= __put_user(sas_ss_flags(regs->sp), - &frame->uc.uc_stack.ss_flags); - err |= __put_user(current->sas_ss_size, &frame->uc.uc_stack.ss_size); - err |= setup_sigcontext(&frame->uc.uc_mcontext, fpstate, - regs, set->sig[0]); - err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); - if (err) - return -EFAULT; + put_user_try { + put_user_ex(sig, &frame->sig); + put_user_ex(&frame->info, &frame->pinfo); + put_user_ex(&frame->uc, &frame->puc); + err |= copy_siginfo_to_user(&frame->info, info); - /* Set up to return from userspace. */ - restorer = VDSO32_SYMBOL(current->mm->context.vdso, rt_sigreturn); - if (ka->sa.sa_flags & SA_RESTORER) - restorer = ka->sa.sa_restorer; - err |= __put_user(restorer, &frame->pretcode); + /* Create the ucontext. */ + if (cpu_has_xsave) + put_user_ex(UC_FP_XSTATE, &frame->uc.uc_flags); + else + put_user_ex(0, &frame->uc.uc_flags); + put_user_ex(0, &frame->uc.uc_link); + put_user_ex(current->sas_ss_sp, &frame->uc.uc_stack.ss_sp); + put_user_ex(sas_ss_flags(regs->sp), + &frame->uc.uc_stack.ss_flags); + put_user_ex(current->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= setup_sigcontext(&frame->uc.uc_mcontext, fpstate, + regs, set->sig[0]); + err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); + + /* Set up to return from userspace. */ + restorer = VDSO32_SYMBOL(current->mm->context.vdso, rt_sigreturn); + if (ka->sa.sa_flags & SA_RESTORER) + restorer = ka->sa.sa_restorer; + put_user_ex(restorer, &frame->pretcode); - /* - * This is movl $__NR_rt_sigreturn, %ax ; int $0x80 - * - * WE DO NOT USE IT ANY MORE! It's only left here for historical - * reasons and because gdb uses it as a signature to notice - * signal handler stack frames. - */ - err |= __put_user(*((u64 *)&rt_retcode), (u64 *)frame->retcode); + /* + * This is movl $__NR_rt_sigreturn, %ax ; int $0x80 + * + * WE DO NOT USE IT ANY MORE! It's only left here for historical + * reasons and because gdb uses it as a signature to notice + * signal handler stack frames. + */ + put_user_ex(*((u64 *)&rt_retcode), (u64 *)frame->retcode); + } put_user_catch(err); if (err) return -EFAULT; @@ -436,28 +441,30 @@ static int __setup_rt_frame(int sig, struct k_sigaction *ka, siginfo_t *info, return -EFAULT; } - /* Create the ucontext. */ - if (cpu_has_xsave) - err |= __put_user(UC_FP_XSTATE, &frame->uc.uc_flags); - else - err |= __put_user(0, &frame->uc.uc_flags); - err |= __put_user(0, &frame->uc.uc_link); - err |= __put_user(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp); - err |= __put_user(sas_ss_flags(regs->sp), - &frame->uc.uc_stack.ss_flags); - err |= __put_user(me->sas_ss_size, &frame->uc.uc_stack.ss_size); - err |= setup_sigcontext(&frame->uc.uc_mcontext, fp, regs, set->sig[0]); - err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); - - /* Set up to return from userspace. If provided, use a stub - already in userspace. */ - /* x86-64 should always use SA_RESTORER. */ - if (ka->sa.sa_flags & SA_RESTORER) { - err |= __put_user(ka->sa.sa_restorer, &frame->pretcode); - } else { - /* could use a vstub here */ - return -EFAULT; - } + put_user_try { + /* Create the ucontext. */ + if (cpu_has_xsave) + put_user_ex(UC_FP_XSTATE, &frame->uc.uc_flags); + else + put_user_ex(0, &frame->uc.uc_flags); + put_user_ex(0, &frame->uc.uc_link); + put_user_ex(me->sas_ss_sp, &frame->uc.uc_stack.ss_sp); + put_user_ex(sas_ss_flags(regs->sp), + &frame->uc.uc_stack.ss_flags); + put_user_ex(me->sas_ss_size, &frame->uc.uc_stack.ss_size); + err |= setup_sigcontext(&frame->uc.uc_mcontext, fp, regs, set->sig[0]); + err |= __copy_to_user(&frame->uc.uc_sigmask, set, sizeof(*set)); + + /* Set up to return from userspace. If provided, use a stub + already in userspace. */ + /* x86-64 should always use SA_RESTORER. */ + if (ka->sa.sa_flags & SA_RESTORER) { + put_user_ex(ka->sa.sa_restorer, &frame->pretcode); + } else { + /* could use a vstub here */ + err |= -EFAULT; + } + } put_user_catch(err); if (err) return -EFAULT; @@ -509,31 +516,41 @@ sys_sigaction(int sig, const struct old_sigaction __user *act, struct old_sigaction __user *oact) { struct k_sigaction new_ka, old_ka; - int ret; + int ret = 0; if (act) { old_sigset_t mask; - if (!access_ok(VERIFY_READ, act, sizeof(*act)) || - __get_user(new_ka.sa.sa_handler, &act->sa_handler) || - __get_user(new_ka.sa.sa_restorer, &act->sa_restorer)) + if (!access_ok(VERIFY_READ, act, sizeof(*act))) return -EFAULT; - __get_user(new_ka.sa.sa_flags, &act->sa_flags); - __get_user(mask, &act->sa_mask); + get_user_try { + get_user_ex(new_ka.sa.sa_handler, &act->sa_handler); + get_user_ex(new_ka.sa.sa_flags, &act->sa_flags); + get_user_ex(mask, &act->sa_mask); + get_user_ex(new_ka.sa.sa_restorer, &act->sa_restorer); + } get_user_catch(ret); + + if (ret) + return -EFAULT; siginitset(&new_ka.sa.sa_mask, mask); } ret = do_sigaction(sig, act ? &new_ka : NULL, oact ? &old_ka : NULL); if (!ret && oact) { - if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact)) || - __put_user(old_ka.sa.sa_handler, &oact->sa_handler) || - __put_user(old_ka.sa.sa_restorer, &oact->sa_restorer)) + if (!access_ok(VERIFY_WRITE, oact, sizeof(*oact))) return -EFAULT; - __put_user(old_ka.sa.sa_flags, &oact->sa_flags); - __put_user(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); + put_user_try { + put_user_ex(old_ka.sa.sa_handler, &oact->sa_handler); + put_user_ex(old_ka.sa.sa_flags, &oact->sa_flags); + put_user_ex(old_ka.sa.sa_mask.sig[0], &oact->sa_mask); + put_user_ex(old_ka.sa.sa_restorer, &oact->sa_restorer); + } put_user_catch(ret); + + if (ret) + return -EFAULT; } return ret; @@ -632,9 +649,16 @@ badframe: } #ifdef CONFIG_X86_32 -asmlinkage int sys_rt_sigreturn(struct pt_regs regs) +/* + * Note: do not pass in pt_regs directly as with tail-call optimization + * GCC will incorrectly stomp on the caller's frame and corrupt user-space + * register state: + */ +asmlinkage int sys_rt_sigreturn(unsigned long __unused) { - return do_rt_sigreturn(®s); + struct pt_regs *regs = (struct pt_regs *)&__unused; + + return do_rt_sigreturn(regs); } #else /* !CONFIG_X86_32 */ asmlinkage long sys_rt_sigreturn(struct pt_regs *regs) diff --git a/arch/x86/kernel/smpboot.c b/arch/x86/kernel/smpboot.c index bb1a3b1fc87..f9dbcff4354 100644 --- a/arch/x86/kernel/smpboot.c +++ b/arch/x86/kernel/smpboot.c @@ -53,7 +53,6 @@ #include <asm/nmi.h> #include <asm/irq.h> #include <asm/idle.h> -#include <asm/smp.h> #include <asm/trampoline.h> #include <asm/cpu.h> #include <asm/numa.h> @@ -63,6 +62,7 @@ #include <asm/vmi.h> #include <asm/genapic.h> #include <asm/setup.h> +#include <asm/uv/uv.h> #include <linux/mc146818rtc.h> #include <mach_apic.h> @@ -745,52 +745,6 @@ static void __cpuinit do_fork_idle(struct work_struct *work) complete(&c_idle->done); } -#ifdef CONFIG_X86_64 - -/* __ref because it's safe to call free_bootmem when after_bootmem == 0. */ -static void __ref free_bootmem_pda(struct x8664_pda *oldpda) -{ - if (!after_bootmem) - free_bootmem((unsigned long)oldpda, sizeof(*oldpda)); -} - -/* - * Allocate node local memory for the AP pda. - * - * Must be called after the _cpu_pda pointer table is initialized. - */ -int __cpuinit get_local_pda(int cpu) -{ - struct x8664_pda *oldpda, *newpda; - unsigned long size = sizeof(struct x8664_pda); - int node = cpu_to_node(cpu); - - if (cpu_pda(cpu) && !cpu_pda(cpu)->in_bootmem) - return 0; - - oldpda = cpu_pda(cpu); - newpda = kmalloc_node(size, GFP_ATOMIC, node); - if (!newpda) { - printk(KERN_ERR "Could not allocate node local PDA " - "for CPU %d on node %d\n", cpu, node); - - if (oldpda) - return 0; /* have a usable pda */ - else - return -1; - } - - if (oldpda) { - memcpy(newpda, oldpda, size); - free_bootmem_pda(oldpda); - } - - newpda->in_bootmem = 0; - cpu_pda(cpu) = newpda; - return 0; -} -#endif /* CONFIG_X86_64 */ - static int __cpuinit do_boot_cpu(int apicid, int cpu) /* * NOTE - on most systems this is a PHYSICAL apic ID, but on multiquad @@ -808,16 +762,6 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu) }; INIT_WORK(&c_idle.work, do_fork_idle); -#ifdef CONFIG_X86_64 - /* Allocate node local memory for AP pdas */ - if (cpu > 0) { - boot_error = get_local_pda(cpu); - if (boot_error) - goto restore_state; - /* if can't get pda memory, can't start cpu */ - } -#endif - alternatives_smp_switch(1); c_idle.idle = get_idle_for_cpu(cpu); @@ -847,14 +791,16 @@ static int __cpuinit do_boot_cpu(int apicid, int cpu) set_idle_for_cpu(cpu, c_idle.idle); do_rest: -#ifdef CONFIG_X86_32 per_cpu(current_task, cpu) = c_idle.idle; - init_gdt(cpu); +#ifdef CONFIG_X86_32 /* Stack for startup_32 can be just as for start_secondary onwards */ irq_ctx_init(cpu); #else - cpu_pda(cpu)->pcurrent = c_idle.idle; clear_tsk_thread_flag(c_idle.idle, TIF_FORK); + initial_gs = per_cpu_offset(cpu); + per_cpu(kernel_stack, cpu) = + (unsigned long)task_stack_page(c_idle.idle) - + KERNEL_STACK_OFFSET + THREAD_SIZE; #endif early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu); initial_code = (unsigned long)start_secondary; @@ -931,9 +877,7 @@ do_rest: inquire_remote_apic(apicid); } } -#ifdef CONFIG_X86_64 -restore_state: -#endif + if (boot_error) { /* Try to put things back the way they were before ... */ numa_remove_cpu(cpu); /* was set by numa_add_cpu */ @@ -1125,6 +1069,7 @@ static int __init smp_sanity_check(unsigned max_cpus) printk(KERN_ERR "... forcing use of dummy APIC emulation." "(tell your hw vendor)\n"); smpboot_clear_io_apic(); + disable_ioapic_setup(); return -1; } @@ -1240,9 +1185,6 @@ out: void __init native_smp_prepare_boot_cpu(void) { int me = smp_processor_id(); -#ifdef CONFIG_X86_32 - init_gdt(me); -#endif switch_to_new_gdt(); /* already set me in cpu_online_mask in boot_cpu_init() */ cpumask_set_cpu(me, cpu_callout_mask); diff --git a/arch/x86/kernel/smpcommon.c b/arch/x86/kernel/smpcommon.c deleted file mode 100644 index 397e309839d..00000000000 --- a/arch/x86/kernel/smpcommon.c +++ /dev/null @@ -1,30 +0,0 @@ -/* - * SMP stuff which is common to all sub-architectures. - */ -#include <linux/module.h> -#include <asm/smp.h> - -#ifdef CONFIG_X86_32 -DEFINE_PER_CPU(unsigned long, this_cpu_off); -EXPORT_PER_CPU_SYMBOL(this_cpu_off); - -/* - * Initialize the CPU's GDT. This is either the boot CPU doing itself - * (still using the master per-cpu area), or a CPU doing it for a - * secondary which will soon come up. - */ -__cpuinit void init_gdt(int cpu) -{ - struct desc_struct gdt; - - pack_descriptor(&gdt, __per_cpu_offset[cpu], 0xFFFFF, - 0x2 | DESCTYPE_S, 0x8); - gdt.s = 1; - - write_gdt_entry(get_cpu_gdt_table(cpu), - GDT_ENTRY_PERCPU, &gdt, DESCTYPE_S); - - per_cpu(this_cpu_off, cpu) = __per_cpu_offset[cpu]; - per_cpu(cpu_number, cpu) = cpu; -} -#endif diff --git a/arch/x86/kernel/tlb_32.c b/arch/x86/kernel/tlb_32.c deleted file mode 100644 index ce505464224..00000000000 --- a/arch/x86/kernel/tlb_32.c +++ /dev/null @@ -1,256 +0,0 @@ -#include <linux/spinlock.h> -#include <linux/cpu.h> -#include <linux/interrupt.h> - -#include <asm/tlbflush.h> - -DEFINE_PER_CPU(struct tlb_state, cpu_tlbstate) - ____cacheline_aligned = { &init_mm, 0, }; - -/* must come after the send_IPI functions above for inlining */ -#include <mach_ipi.h> - -/* - * Smarter SMP flushing macros. - * c/o Linus Torvalds. - * - * These mean you can really definitely utterly forget about - * writing to user space from interrupts. (Its not allowed anyway). - * - * Optimizations Manfred Spraul <manfred@colorfullife.com> - */ - -static cpumask_t flush_cpumask; -static struct mm_struct *flush_mm; -static unsigned long flush_va; -static DEFINE_SPINLOCK(tlbstate_lock); - -/* - * We cannot call mmdrop() because we are in interrupt context, - * instead update mm->cpu_vm_mask. - * - * We need to reload %cr3 since the page tables may be going - * away from under us.. - */ -void leave_mm(int cpu) -{ - BUG_ON(x86_read_percpu(cpu_tlbstate.state) == TLBSTATE_OK); - cpu_clear(cpu, x86_read_percpu(cpu_tlbstate.active_mm)->cpu_vm_mask); - load_cr3(swapper_pg_dir); -} -EXPORT_SYMBOL_GPL(leave_mm); - -/* - * - * The flush IPI assumes that a thread switch happens in this order: - * [cpu0: the cpu that switches] - * 1) switch_mm() either 1a) or 1b) - * 1a) thread switch to a different mm - * 1a1) cpu_clear(cpu, old_mm->cpu_vm_mask); - * Stop ipi delivery for the old mm. This is not synchronized with - * the other cpus, but smp_invalidate_interrupt ignore flush ipis - * for the wrong mm, and in the worst case we perform a superfluous - * tlb flush. - * 1a2) set cpu_tlbstate to TLBSTATE_OK - * Now the smp_invalidate_interrupt won't call leave_mm if cpu0 - * was in lazy tlb mode. - * 1a3) update cpu_tlbstate[].active_mm - * Now cpu0 accepts tlb flushes for the new mm. - * 1a4) cpu_set(cpu, new_mm->cpu_vm_mask); - * Now the other cpus will send tlb flush ipis. - * 1a4) change cr3. - * 1b) thread switch without mm change - * cpu_tlbstate[].active_mm is correct, cpu0 already handles - * flush ipis. - * 1b1) set cpu_tlbstate to TLBSTATE_OK - * 1b2) test_and_set the cpu bit in cpu_vm_mask. - * Atomically set the bit [other cpus will start sending flush ipis], - * and test the bit. - * 1b3) if the bit was 0: leave_mm was called, flush the tlb. - * 2) switch %%esp, ie current - * - * The interrupt must handle 2 special cases: - * - cr3 is changed before %%esp, ie. it cannot use current->{active_,}mm. - * - the cpu performs speculative tlb reads, i.e. even if the cpu only - * runs in kernel space, the cpu could load tlb entries for user space - * pages. - * - * The good news is that cpu_tlbstate is local to each cpu, no - * write/read ordering problems. - */ - -/* - * TLB flush IPI: - * - * 1) Flush the tlb entries if the cpu uses the mm that's being flushed. - * 2) Leave the mm if we are in the lazy tlb mode. - */ - -void smp_invalidate_interrupt(struct pt_regs *regs) -{ - unsigned long cpu; - - cpu = get_cpu(); - - if (!cpu_isset(cpu, flush_cpumask)) - goto out; - /* - * This was a BUG() but until someone can quote me the - * line from the intel manual that guarantees an IPI to - * multiple CPUs is retried _only_ on the erroring CPUs - * its staying as a return - * - * BUG(); - */ - - if (flush_mm == x86_read_percpu(cpu_tlbstate.active_mm)) { - if (x86_read_percpu(cpu_tlbstate.state) == TLBSTATE_OK) { - if (flush_va == TLB_FLUSH_ALL) - local_flush_tlb(); - else - __flush_tlb_one(flush_va); - } else - leave_mm(cpu); - } - ack_APIC_irq(); - smp_mb__before_clear_bit(); - cpu_clear(cpu, flush_cpumask); - smp_mb__after_clear_bit(); -out: - put_cpu_no_resched(); - inc_irq_stat(irq_tlb_count); -} - -void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm, - unsigned long va) -{ - cpumask_t cpumask = *cpumaskp; - - /* - * A couple of (to be removed) sanity checks: - * - * - current CPU must not be in mask - * - mask must exist :) - */ - BUG_ON(cpus_empty(cpumask)); - BUG_ON(cpu_isset(smp_processor_id(), cpumask)); - BUG_ON(!mm); - -#ifdef CONFIG_HOTPLUG_CPU - /* If a CPU which we ran on has gone down, OK. */ - cpus_and(cpumask, cpumask, cpu_online_map); - if (unlikely(cpus_empty(cpumask))) - return; -#endif - - /* - * i'm not happy about this global shared spinlock in the - * MM hot path, but we'll see how contended it is. - * AK: x86-64 has a faster method that could be ported. - */ - spin_lock(&tlbstate_lock); - - flush_mm = mm; - flush_va = va; - cpus_or(flush_cpumask, cpumask, flush_cpumask); - - /* - * Make the above memory operations globally visible before - * sending the IPI. - */ - smp_mb(); - /* - * We have to send the IPI only to - * CPUs affected. - */ - send_IPI_mask(&cpumask, INVALIDATE_TLB_VECTOR); - - while (!cpus_empty(flush_cpumask)) - /* nothing. lockup detection does not belong here */ - cpu_relax(); - - flush_mm = NULL; - flush_va = 0; - spin_unlock(&tlbstate_lock); -} - -void flush_tlb_current_task(void) -{ - struct mm_struct *mm = current->mm; - cpumask_t cpu_mask; - - preempt_disable(); - cpu_mask = mm->cpu_vm_mask; - cpu_clear(smp_processor_id(), cpu_mask); - - local_flush_tlb(); - if (!cpus_empty(cpu_mask)) - flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL); - preempt_enable(); -} - -void flush_tlb_mm(struct mm_struct *mm) -{ - cpumask_t cpu_mask; - - preempt_disable(); - cpu_mask = mm->cpu_vm_mask; - cpu_clear(smp_processor_id(), cpu_mask); - - if (current->active_mm == mm) { - if (current->mm) - local_flush_tlb(); - else - leave_mm(smp_processor_id()); - } - if (!cpus_empty(cpu_mask)) - flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL); - - preempt_enable(); -} - -void flush_tlb_page(struct vm_area_struct *vma, unsigned long va) -{ - struct mm_struct *mm = vma->vm_mm; - cpumask_t cpu_mask; - - preempt_disable(); - cpu_mask = mm->cpu_vm_mask; - cpu_clear(smp_processor_id(), cpu_mask); - - if (current->active_mm == mm) { - if (current->mm) - __flush_tlb_one(va); - else - leave_mm(smp_processor_id()); - } - - if (!cpus_empty(cpu_mask)) - flush_tlb_others(cpu_mask, mm, va); - - preempt_enable(); -} -EXPORT_SYMBOL(flush_tlb_page); - -static void do_flush_tlb_all(void *info) -{ - unsigned long cpu = smp_processor_id(); - - __flush_tlb_all(); - if (x86_read_percpu(cpu_tlbstate.state) == TLBSTATE_LAZY) - leave_mm(cpu); -} - -void flush_tlb_all(void) -{ - on_each_cpu(do_flush_tlb_all, NULL, 1); -} - -void reset_lazy_tlbstate(void) -{ - int cpu = raw_smp_processor_id(); - - per_cpu(cpu_tlbstate, cpu).state = 0; - per_cpu(cpu_tlbstate, cpu).active_mm = &init_mm; -} - diff --git a/arch/x86/kernel/tlb_uv.c b/arch/x86/kernel/tlb_uv.c index f885023167e..89fce1b6d01 100644 --- a/arch/x86/kernel/tlb_uv.c +++ b/arch/x86/kernel/tlb_uv.c @@ -11,6 +11,7 @@ #include <linux/kernel.h> #include <asm/mmu_context.h> +#include <asm/uv/uv.h> #include <asm/uv/uv_mmrs.h> #include <asm/uv/uv_hub.h> #include <asm/uv/uv_bau.h> @@ -200,6 +201,7 @@ static int uv_wait_completion(struct bau_desc *bau_desc, destination_timeouts = 0; } } + cpu_relax(); } return FLUSH_COMPLETE; } @@ -209,14 +211,15 @@ static int uv_wait_completion(struct bau_desc *bau_desc, * * Send a broadcast and wait for a broadcast message to complete. * - * The cpumaskp mask contains the cpus the broadcast was sent to. + * The flush_mask contains the cpus the broadcast was sent to. * - * Returns 1 if all remote flushing was done. The mask is zeroed. - * Returns 0 if some remote flushing remains to be done. The mask is left - * unchanged. + * Returns NULL if all remote flushing was done. The mask is zeroed. + * Returns @flush_mask if some remote flushing remains to be done. The + * mask will have some bits still set. */ -int uv_flush_send_and_wait(int cpu, int this_blade, struct bau_desc *bau_desc, - cpumask_t *cpumaskp) +const struct cpumask *uv_flush_send_and_wait(int cpu, int this_blade, + struct bau_desc *bau_desc, + struct cpumask *flush_mask) { int completion_status = 0; int right_shift; @@ -263,59 +266,69 @@ int uv_flush_send_and_wait(int cpu, int this_blade, struct bau_desc *bau_desc, * Success, so clear the remote cpu's from the mask so we don't * use the IPI method of shootdown on them. */ - for_each_cpu_mask(bit, *cpumaskp) { + for_each_cpu(bit, flush_mask) { blade = uv_cpu_to_blade_id(bit); if (blade == this_blade) continue; - cpu_clear(bit, *cpumaskp); + cpumask_clear_cpu(bit, flush_mask); } - if (!cpus_empty(*cpumaskp)) - return 0; - return 1; + if (!cpumask_empty(flush_mask)) + return flush_mask; + return NULL; } /** * uv_flush_tlb_others - globally purge translation cache of a virtual * address or all TLB's - * @cpumaskp: mask of all cpu's in which the address is to be removed + * @cpumask: mask of all cpu's in which the address is to be removed * @mm: mm_struct containing virtual address range * @va: virtual address to be removed (or TLB_FLUSH_ALL for all TLB's on cpu) + * @cpu: the current cpu * * This is the entry point for initiating any UV global TLB shootdown. * * Purges the translation caches of all specified processors of the given * virtual address, or purges all TLB's on specified processors. * - * The caller has derived the cpumaskp from the mm_struct and has subtracted - * the local cpu from the mask. This function is called only if there - * are bits set in the mask. (e.g. flush_tlb_page()) + * The caller has derived the cpumask from the mm_struct. This function + * is called only if there are bits set in the mask. (e.g. flush_tlb_page()) * - * The cpumaskp is converted into a nodemask of the nodes containing + * The cpumask is converted into a nodemask of the nodes containing * the cpus. * - * Returns 1 if all remote flushing was done. - * Returns 0 if some remote flushing remains to be done. + * Note that this function should be called with preemption disabled. + * + * Returns NULL if all remote flushing was done. + * Returns pointer to cpumask if some remote flushing remains to be + * done. The returned pointer is valid till preemption is re-enabled. */ -int uv_flush_tlb_others(cpumask_t *cpumaskp, struct mm_struct *mm, - unsigned long va) +const struct cpumask *uv_flush_tlb_others(const struct cpumask *cpumask, + struct mm_struct *mm, + unsigned long va, unsigned int cpu) { + static DEFINE_PER_CPU(cpumask_t, flush_tlb_mask); + struct cpumask *flush_mask = &__get_cpu_var(flush_tlb_mask); int i; int bit; int blade; - int cpu; + int uv_cpu; int this_blade; int locals = 0; struct bau_desc *bau_desc; - cpu = uv_blade_processor_id(); + WARN_ON(!in_atomic()); + + cpumask_andnot(flush_mask, cpumask, cpumask_of(cpu)); + + uv_cpu = uv_blade_processor_id(); this_blade = uv_numa_blade_id(); bau_desc = __get_cpu_var(bau_control).descriptor_base; - bau_desc += UV_ITEMS_PER_DESCRIPTOR * cpu; + bau_desc += UV_ITEMS_PER_DESCRIPTOR * uv_cpu; bau_nodes_clear(&bau_desc->distribution, UV_DISTRIBUTION_SIZE); i = 0; - for_each_cpu_mask(bit, *cpumaskp) { + for_each_cpu(bit, flush_mask) { blade = uv_cpu_to_blade_id(bit); BUG_ON(blade > (UV_DISTRIBUTION_SIZE - 1)); if (blade == this_blade) { @@ -330,17 +343,17 @@ int uv_flush_tlb_others(cpumask_t *cpumaskp, struct mm_struct *mm, * no off_node flushing; return status for local node */ if (locals) - return 0; + return flush_mask; else - return 1; + return NULL; } __get_cpu_var(ptcstats).requestor++; __get_cpu_var(ptcstats).ntargeted += i; bau_desc->payload.address = va; - bau_desc->payload.sending_cpu = smp_processor_id(); + bau_desc->payload.sending_cpu = cpu; - return uv_flush_send_and_wait(cpu, this_blade, bau_desc, cpumaskp); + return uv_flush_send_and_wait(uv_cpu, this_blade, bau_desc, flush_mask); } /* diff --git a/arch/x86/kernel/traps.c b/arch/x86/kernel/traps.c index 98c2d055284..ed5aee5f3fc 100644 --- a/arch/x86/kernel/traps.c +++ b/arch/x86/kernel/traps.c @@ -59,7 +59,6 @@ #ifdef CONFIG_X86_64 #include <asm/pgalloc.h> #include <asm/proto.h> -#include <asm/pda.h> #else #include <asm/processor-flags.h> #include <asm/arch_hooks.h> diff --git a/arch/x86/kernel/vmi_32.c b/arch/x86/kernel/vmi_32.c index 23206ba1687..1d3302cc2dd 100644 --- a/arch/x86/kernel/vmi_32.c +++ b/arch/x86/kernel/vmi_32.c @@ -858,7 +858,7 @@ void __init vmi_init(void) #endif } -void vmi_activate(void) +void __init vmi_activate(void) { unsigned long flags; diff --git a/arch/x86/kernel/vmlinux_32.lds.S b/arch/x86/kernel/vmlinux_32.lds.S index 82c67559dde..3eba7f7bac0 100644 --- a/arch/x86/kernel/vmlinux_32.lds.S +++ b/arch/x86/kernel/vmlinux_32.lds.S @@ -178,14 +178,7 @@ SECTIONS __initramfs_end = .; } #endif - . = ALIGN(PAGE_SIZE); - .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { - __per_cpu_start = .; - *(.data.percpu.page_aligned) - *(.data.percpu) - *(.data.percpu.shared_aligned) - __per_cpu_end = .; - } + PERCPU(PAGE_SIZE) . = ALIGN(PAGE_SIZE); /* freed after init ends here */ diff --git a/arch/x86/kernel/vmlinux_64.lds.S b/arch/x86/kernel/vmlinux_64.lds.S index 1a614c0e6be..c9740996430 100644 --- a/arch/x86/kernel/vmlinux_64.lds.S +++ b/arch/x86/kernel/vmlinux_64.lds.S @@ -5,6 +5,7 @@ #define LOAD_OFFSET __START_KERNEL_map #include <asm-generic/vmlinux.lds.h> +#include <asm/asm-offsets.h> #include <asm/page.h> #undef i386 /* in case the preprocessor is a 32bit one */ @@ -13,12 +14,14 @@ OUTPUT_FORMAT("elf64-x86-64", "elf64-x86-64", "elf64-x86-64") OUTPUT_ARCH(i386:x86-64) ENTRY(phys_startup_64) jiffies_64 = jiffies; -_proxy_pda = 1; PHDRS { text PT_LOAD FLAGS(5); /* R_E */ data PT_LOAD FLAGS(7); /* RWE */ user PT_LOAD FLAGS(7); /* RWE */ data.init PT_LOAD FLAGS(7); /* RWE */ +#ifdef CONFIG_SMP + percpu PT_LOAD FLAGS(7); /* RWE */ +#endif note PT_NOTE FLAGS(0); /* ___ */ } SECTIONS @@ -208,14 +211,28 @@ SECTIONS __initramfs_end = .; #endif +#ifdef CONFIG_SMP + /* + * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the + * output PHDR, so the next output section - __data_nosave - should + * switch it back to data.init. Also, pda should be at the head of + * percpu area. Preallocate it and define the percpu offset symbol + * so that it can be accessed as a percpu variable. + */ + . = ALIGN(PAGE_SIZE); + PERCPU_VADDR(0, :percpu) +#else PERCPU(PAGE_SIZE) +#endif . = ALIGN(PAGE_SIZE); __init_end = .; . = ALIGN(PAGE_SIZE); __nosave_begin = .; - .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { *(.data.nosave) } + .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) { + *(.data.nosave) + } :data.init /* switch back to data.init, see PERCPU_VADDR() above */ . = ALIGN(PAGE_SIZE); __nosave_end = .; @@ -244,3 +261,8 @@ SECTIONS */ ASSERT((_end - _text <= KERNEL_IMAGE_SIZE), "kernel image bigger than KERNEL_IMAGE_SIZE") + +#ifdef CONFIG_SMP +ASSERT((per_cpu__irq_stack_union == 0), + "irq_stack_union is not at start of per-cpu area"); +#endif diff --git a/arch/x86/kernel/x8664_ksyms_64.c b/arch/x86/kernel/x8664_ksyms_64.c index 695e426aa35..3909e3ba5ce 100644 --- a/arch/x86/kernel/x8664_ksyms_64.c +++ b/arch/x86/kernel/x8664_ksyms_64.c @@ -58,5 +58,3 @@ EXPORT_SYMBOL(__memcpy); EXPORT_SYMBOL(empty_zero_page); EXPORT_SYMBOL(init_level4_pgt); EXPORT_SYMBOL(load_gs_index); - -EXPORT_SYMBOL(_proxy_pda); diff --git a/arch/x86/lib/usercopy_32.c b/arch/x86/lib/usercopy_32.c index 4a20b2f9a38..7c8ca91bb9e 100644 --- a/arch/x86/lib/usercopy_32.c +++ b/arch/x86/lib/usercopy_32.c @@ -56,7 +56,7 @@ do { \ " jmp 2b\n" \ ".previous\n" \ _ASM_EXTABLE(0b,3b) \ - : "=d"(res), "=c"(count), "=&a" (__d0), "=&S" (__d1), \ + : "=&d"(res), "=&c"(count), "=&a" (__d0), "=&S" (__d1), \ "=&D" (__d2) \ : "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \ : "memory"); \ @@ -218,7 +218,7 @@ long strnlen_user(const char __user *s, long n) " .align 4\n" " .long 0b,2b\n" ".previous" - :"=r" (n), "=D" (s), "=a" (res), "=c" (tmp) + :"=&r" (n), "=&D" (s), "=&a" (res), "=&c" (tmp) :"0" (n), "1" (s), "2" (0), "3" (mask) :"cc"); return res & mask; diff --git a/arch/x86/lib/usercopy_64.c b/arch/x86/lib/usercopy_64.c index 64d6c84e635..ec13cb5f17e 100644 --- a/arch/x86/lib/usercopy_64.c +++ b/arch/x86/lib/usercopy_64.c @@ -32,7 +32,7 @@ do { \ " jmp 2b\n" \ ".previous\n" \ _ASM_EXTABLE(0b,3b) \ - : "=r"(res), "=c"(count), "=&a" (__d0), "=&S" (__d1), \ + : "=&r"(res), "=&c"(count), "=&a" (__d0), "=&S" (__d1), \ "=&D" (__d2) \ : "i"(-EFAULT), "0"(count), "1"(count), "3"(src), "4"(dst) \ : "memory"); \ @@ -86,7 +86,7 @@ unsigned long __clear_user(void __user *addr, unsigned long size) ".previous\n" _ASM_EXTABLE(0b,3b) _ASM_EXTABLE(1b,2b) - : [size8] "=c"(size), [dst] "=&D" (__d0) + : [size8] "=&c"(size), [dst] "=&D" (__d0) : [size1] "r"(size & 7), "[size8]" (size / 8), "[dst]"(addr), [zero] "r" (0UL), [eight] "r" (8UL)); return size; diff --git a/arch/x86/mach-rdc321x/Makefile b/arch/x86/mach-rdc321x/Makefile deleted file mode 100644 index 8325b4ca431..00000000000 --- a/arch/x86/mach-rdc321x/Makefile +++ /dev/null @@ -1,5 +0,0 @@ -# -# Makefile for the RDC321x specific parts of the kernel -# -obj-$(CONFIG_X86_RDC321X) := gpio.o platform.o - diff --git a/arch/x86/mach-rdc321x/gpio.c b/arch/x86/mach-rdc321x/gpio.c deleted file mode 100644 index 247f33d3a40..00000000000 --- a/arch/x86/mach-rdc321x/gpio.c +++ /dev/null @@ -1,194 +0,0 @@ -/* - * GPIO support for RDC SoC R3210/R8610 - * - * Copyright (C) 2007, Florian Fainelli <florian@openwrt.org> - * Copyright (C) 2008, Volker Weiss <dev@tintuc.de> - * - * This program is free software; you can redistribute it and/or modify - * it under the terms of the GNU General Public License as published by - * the Free Software Foundation; either version 2 of the License, or - * (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the Free Software - * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. - * - */ - - -#include <linux/spinlock.h> -#include <linux/io.h> -#include <linux/types.h> -#include <linux/module.h> - -#include <asm/gpio.h> -#include <asm/mach-rdc321x/rdc321x_defs.h> - - -/* spin lock to protect our private copy of GPIO data register plus - the access to PCI conf registers. */ -static DEFINE_SPINLOCK(gpio_lock); - -/* copy of GPIO data registers */ -static u32 gpio_data_reg1; -static u32 gpio_data_reg2; - -static u32 gpio_request_data[2]; - - -static inline void rdc321x_conf_write(unsigned addr, u32 value) -{ - outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR); - outl(value, RDC3210_CFGREG_DATA); -} - -static inline void rdc321x_conf_or(unsigned addr, u32 value) -{ - outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR); - value |= inl(RDC3210_CFGREG_DATA); - outl(value, RDC3210_CFGREG_DATA); -} - -static inline u32 rdc321x_conf_read(unsigned addr) -{ - outl((1 << 31) | (7 << 11) | addr, RDC3210_CFGREG_ADDR); - - return inl(RDC3210_CFGREG_DATA); -} - -/* configure pin as GPIO */ -static void rdc321x_configure_gpio(unsigned gpio) -{ - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - rdc321x_conf_or(gpio < 32 - ? RDC321X_GPIO_CTRL_REG1 : RDC321X_GPIO_CTRL_REG2, - 1 << (gpio & 0x1f)); - spin_unlock_irqrestore(&gpio_lock, flags); -} - -/* initially setup the 2 copies of the gpio data registers. - This function must be called by the platform setup code. */ -void __init rdc321x_gpio_setup() -{ - /* this might not be, what others (BIOS, bootloader, etc.) - wrote to these registers before, but it's a good guess. Still - better than just using 0xffffffff. */ - - gpio_data_reg1 = rdc321x_conf_read(RDC321X_GPIO_DATA_REG1); - gpio_data_reg2 = rdc321x_conf_read(RDC321X_GPIO_DATA_REG2); -} - -/* determine, if gpio number is valid */ -static inline int rdc321x_is_gpio(unsigned gpio) -{ - return gpio <= RDC321X_MAX_GPIO; -} - -/* request GPIO */ -int rdc_gpio_request(unsigned gpio, const char *label) -{ - unsigned long flags; - - if (!rdc321x_is_gpio(gpio)) - return -EINVAL; - - spin_lock_irqsave(&gpio_lock, flags); - if (gpio_request_data[(gpio & 0x20) ? 1 : 0] & (1 << (gpio & 0x1f))) - goto inuse; - gpio_request_data[(gpio & 0x20) ? 1 : 0] |= (1 << (gpio & 0x1f)); - spin_unlock_irqrestore(&gpio_lock, flags); - - return 0; -inuse: - spin_unlock_irqrestore(&gpio_lock, flags); - return -EINVAL; -} -EXPORT_SYMBOL(rdc_gpio_request); - -/* release previously-claimed GPIO */ -void rdc_gpio_free(unsigned gpio) -{ - unsigned long flags; - - if (!rdc321x_is_gpio(gpio)) - return; - - spin_lock_irqsave(&gpio_lock, flags); - gpio_request_data[(gpio & 0x20) ? 1 : 0] &= ~(1 << (gpio & 0x1f)); - spin_unlock_irqrestore(&gpio_lock, flags); -} -EXPORT_SYMBOL(rdc_gpio_free); - -/* read GPIO pin */ -int rdc_gpio_get_value(unsigned gpio) -{ - u32 reg; - unsigned long flags; - - spin_lock_irqsave(&gpio_lock, flags); - reg = rdc321x_conf_read(gpio < 32 - ? RDC321X_GPIO_DATA_REG1 : RDC321X_GPIO_DATA_REG2); - spin_unlock_irqrestore(&gpio_lock, flags); - - return (1 << (gpio & 0x1f)) & reg ? 1 : 0; -} -EXPORT_SYMBOL(rdc_gpio_get_value); - -/* set GPIO pin to value */ -void rdc_gpio_set_value(unsigned gpio, int value) -{ - unsigned long flags; - u32 reg; - - reg = 1 << (gpio & 0x1f); - if (gpio < 32) { - spin_lock_irqsave(&gpio_lock, flags); - if (value) - gpio_data_reg1 |= reg; - else - gpio_data_reg1 &= ~reg; - rdc321x_conf_write(RDC321X_GPIO_DATA_REG1, gpio_data_reg1); - spin_unlock_irqrestore(&gpio_lock, flags); - } else { - spin_lock_irqsave(&gpio_lock, flags); - if (value) - gpio_data_reg2 |= reg; - else - gpio_data_reg2 &= ~reg; - rdc321x_conf_write(RDC321X_GPIO_DATA_REG2, gpio_data_reg2); - spin_unlock_irqrestore(&gpio_lock, flags); - } -} -EXPORT_SYMBOL(rdc_gpio_set_value); - -/* configure GPIO pin as input */ -int rdc_gpio_direction_input(unsigned gpio) -{ - if (!rdc321x_is_gpio(gpio)) - return -EINVAL; - - rdc321x_configure_gpio(gpio); - - return 0; -} -EXPORT_SYMBOL(rdc_gpio_direction_input); - -/* configure GPIO pin as output and set value */ -int rdc_gpio_direction_output(unsigned gpio, int value) -{ - if (!rdc321x_is_gpio(gpio)) - return -EINVAL; - - gpio_set_value(gpio, value); - rdc321x_configure_gpio(gpio); - - return 0; -} -EXPORT_SYMBOL(rdc_gpio_direction_output); diff --git a/arch/x86/mach-rdc321x/platform.c b/arch/x86/mach-rdc321x/platform.c deleted file mode 100644 index 4f4e50c3ad3..00000000000 --- a/arch/x86/mach-rdc321x/platform.c +++ /dev/null @@ -1,69 +0,0 @@ -/* - * Generic RDC321x platform devices - * - * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org> - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License - * as published by the Free Software Foundation; either version 2 - * of the License, or (at your option) any later version. - * - * This program is distributed in the hope that it will be useful, - * but WITHOUT ANY WARRANTY; without even the implied warranty of - * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - * - * You should have received a copy of the GNU General Public License - * along with this program; if not, write to the - * Free Software Foundation, Inc., 51 Franklin Street, Fifth Floor, - * Boston, MA 02110-1301, USA. - * - */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/list.h> -#include <linux/device.h> -#include <linux/platform_device.h> -#include <linux/leds.h> - -#include <asm/gpio.h> - -/* LEDS */ -static struct gpio_led default_leds[] = { - { .name = "rdc:dmz", .gpio = 1, }, -}; - -static struct gpio_led_platform_data rdc321x_led_data = { - .num_leds = ARRAY_SIZE(default_leds), - .leds = default_leds, -}; - -static struct platform_device rdc321x_leds = { - .name = "leds-gpio", - .id = -1, - .dev = { - .platform_data = &rdc321x_led_data, - } -}; - -/* Watchdog */ -static struct platform_device rdc321x_wdt = { - .name = "rdc321x-wdt", - .id = -1, - .num_resources = 0, -}; - -static struct platform_device *rdc321x_devs[] = { - &rdc321x_leds, - &rdc321x_wdt -}; - -static int __init rdc_board_setup(void) -{ - rdc321x_gpio_setup(); - - return platform_add_devices(rdc321x_devs, ARRAY_SIZE(rdc321x_devs)); -} - -arch_initcall(rdc_board_setup); diff --git a/arch/x86/mach-voyager/setup.c b/arch/x86/mach-voyager/setup.c index a580b9562e7..0ade62555ff 100644 --- a/arch/x86/mach-voyager/setup.c +++ b/arch/x86/mach-voyager/setup.c @@ -9,6 +9,7 @@ #include <asm/e820.h> #include <asm/io.h> #include <asm/setup.h> +#include <asm/cpu.h> void __init pre_intr_init_hook(void) { diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c index 9840b7ec749..331cd6d5648 100644 --- a/arch/x86/mach-voyager/voyager_smp.c +++ b/arch/x86/mach-voyager/voyager_smp.c @@ -402,7 +402,7 @@ void __init find_smp_config(void) VOYAGER_SUS_IN_CONTROL_PORT); current_thread_info()->cpu = boot_cpu_id; - x86_write_percpu(cpu_number, boot_cpu_id); + percpu_write(cpu_number, boot_cpu_id); } /* @@ -530,7 +530,6 @@ static void __init do_boot_cpu(__u8 cpu) /* init_tasks (in sched.c) is indexed logically */ stack_start.sp = (void *)idle->thread.sp; - init_gdt(cpu); per_cpu(current_task, cpu) = idle; early_gdt_descr.address = (unsigned long)get_cpu_gdt_table(cpu); irq_ctx_init(cpu); @@ -1747,7 +1746,6 @@ static void __init voyager_smp_prepare_cpus(unsigned int max_cpus) static void __cpuinit voyager_smp_prepare_boot_cpu(void) { - init_gdt(smp_processor_id()); switch_to_new_gdt(); cpu_set(smp_processor_id(), cpu_online_map); @@ -1780,7 +1778,6 @@ static void __init voyager_smp_cpus_done(unsigned int max_cpus) void __init smp_setup_processor_id(void) { current_thread_info()->cpu = hard_smp_processor_id(); - x86_write_percpu(cpu_number, hard_smp_processor_id()); } static void voyager_send_call_func(cpumask_t callmask) diff --git a/arch/x86/mm/Makefile b/arch/x86/mm/Makefile index d8cc96a2738..9f05157220f 100644 --- a/arch/x86/mm/Makefile +++ b/arch/x86/mm/Makefile @@ -1,6 +1,8 @@ obj-y := init_$(BITS).o fault.o ioremap.o extable.o pageattr.o mmap.o \ pat.o pgtable.o gup.o +obj-$(CONFIG_X86_SMP) += tlb.o + obj-$(CONFIG_X86_32) += pgtable_32.o iomap_32.o obj-$(CONFIG_HUGETLB_PAGE) += hugetlbpage.o diff --git a/arch/x86/mm/extable.c b/arch/x86/mm/extable.c index 7e8db53528a..61b41ca3b5a 100644 --- a/arch/x86/mm/extable.c +++ b/arch/x86/mm/extable.c @@ -23,6 +23,12 @@ int fixup_exception(struct pt_regs *regs) fixup = search_exception_tables(regs->ip); if (fixup) { + /* If fixup is less than 16, it means uaccess error */ + if (fixup->fixup < 16) { + current_thread_info()->uaccess_err = -EFAULT; + regs->ip += fixup->fixup; + return 1; + } regs->ip = fixup->fixup; return 1; } diff --git a/arch/x86/mm/fault.c b/arch/x86/mm/fault.c index 90dfae511a4..d3eee74f830 100644 --- a/arch/x86/mm/fault.c +++ b/arch/x86/mm/fault.c @@ -26,6 +26,7 @@ #include <linux/kprobes.h> #include <linux/uaccess.h> #include <linux/kdebug.h> +#include <linux/magic.h> #include <asm/system.h> #include <asm/desc.h> @@ -91,8 +92,8 @@ static inline int notify_page_fault(struct pt_regs *regs) * * Opcode checker based on code by Richard Brunner */ -static int is_prefetch(struct pt_regs *regs, unsigned long addr, - unsigned long error_code) +static int is_prefetch(struct pt_regs *regs, unsigned long error_code, + unsigned long addr) { unsigned char *instr; int scan_more = 1; @@ -409,17 +410,16 @@ static void show_fault_oops(struct pt_regs *regs, unsigned long error_code, } #ifdef CONFIG_X86_64 -static noinline void pgtable_bad(unsigned long address, struct pt_regs *regs, - unsigned long error_code) +static noinline void pgtable_bad(struct pt_regs *regs, + unsigned long error_code, unsigned long address) { unsigned long flags = oops_begin(); int sig = SIGKILL; - struct task_struct *tsk; + struct task_struct *tsk = current; printk(KERN_ALERT "%s: Corrupted page table at address %lx\n", - current->comm, address); + tsk->comm, address); dump_pagetable(address); - tsk = current; tsk->thread.cr2 = address; tsk->thread.trap_no = 14; tsk->thread.error_code = error_code; @@ -429,6 +429,196 @@ static noinline void pgtable_bad(unsigned long address, struct pt_regs *regs, } #endif +static noinline void no_context(struct pt_regs *regs, + unsigned long error_code, unsigned long address) +{ + struct task_struct *tsk = current; + unsigned long *stackend; + +#ifdef CONFIG_X86_64 + unsigned long flags; + int sig; +#endif + + /* Are we prepared to handle this kernel fault? */ + if (fixup_exception(regs)) + return; + + /* + * X86_32 + * Valid to do another page fault here, because if this fault + * had been triggered by is_prefetch fixup_exception would have + * handled it. + * + * X86_64 + * Hall of shame of CPU/BIOS bugs. + */ + if (is_prefetch(regs, error_code, address)) + return; + + if (is_errata93(regs, address)) + return; + + /* + * Oops. The kernel tried to access some bad page. We'll have to + * terminate things with extreme prejudice. + */ +#ifdef CONFIG_X86_32 + bust_spinlocks(1); +#else + flags = oops_begin(); +#endif + + show_fault_oops(regs, error_code, address); + + stackend = end_of_stack(tsk); + if (*stackend != STACK_END_MAGIC) + printk(KERN_ALERT "Thread overran stack, or stack corrupted\n"); + + tsk->thread.cr2 = address; + tsk->thread.trap_no = 14; + tsk->thread.error_code = error_code; + +#ifdef CONFIG_X86_32 + die("Oops", regs, error_code); + bust_spinlocks(0); + do_exit(SIGKILL); +#else + sig = SIGKILL; + if (__die("Oops", regs, error_code)) + sig = 0; + /* Executive summary in case the body of the oops scrolled away */ + printk(KERN_EMERG "CR2: %016lx\n", address); + oops_end(flags, regs, sig); +#endif +} + +static void __bad_area_nosemaphore(struct pt_regs *regs, + unsigned long error_code, unsigned long address, + int si_code) +{ + struct task_struct *tsk = current; + + /* User mode accesses just cause a SIGSEGV */ + if (error_code & PF_USER) { + /* + * It's possible to have interrupts off here. + */ + local_irq_enable(); + + /* + * Valid to do another page fault here because this one came + * from user space. + */ + if (is_prefetch(regs, error_code, address)) + return; + + if (is_errata100(regs, address)) + return; + + if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) && + printk_ratelimit()) { + printk( + "%s%s[%d]: segfault at %lx ip %p sp %p error %lx", + task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG, + tsk->comm, task_pid_nr(tsk), address, + (void *) regs->ip, (void *) regs->sp, error_code); + print_vma_addr(" in ", regs->ip); + printk("\n"); + } + + tsk->thread.cr2 = address; + /* Kernel addresses are always protection faults */ + tsk->thread.error_code = error_code | (address >= TASK_SIZE); + tsk->thread.trap_no = 14; + force_sig_info_fault(SIGSEGV, si_code, address, tsk); + return; + } + + if (is_f00f_bug(regs, address)) + return; + + no_context(regs, error_code, address); +} + +static noinline void bad_area_nosemaphore(struct pt_regs *regs, + unsigned long error_code, unsigned long address) +{ + __bad_area_nosemaphore(regs, error_code, address, SEGV_MAPERR); +} + +static void __bad_area(struct pt_regs *regs, + unsigned long error_code, unsigned long address, + int si_code) +{ + struct mm_struct *mm = current->mm; + + /* + * Something tried to access memory that isn't in our memory map.. + * Fix it, but check if it's kernel or user first.. + */ + up_read(&mm->mmap_sem); + + __bad_area_nosemaphore(regs, error_code, address, si_code); +} + +static noinline void bad_area(struct pt_regs *regs, + unsigned long error_code, unsigned long address) +{ + __bad_area(regs, error_code, address, SEGV_MAPERR); +} + +static noinline void bad_area_access_error(struct pt_regs *regs, + unsigned long error_code, unsigned long address) +{ + __bad_area(regs, error_code, address, SEGV_ACCERR); +} + +/* TODO: fixup for "mm-invoke-oom-killer-from-page-fault.patch" */ +static void out_of_memory(struct pt_regs *regs, + unsigned long error_code, unsigned long address) +{ + /* + * We ran out of memory, call the OOM killer, and return the userspace + * (which will retry the fault, or kill us if we got oom-killed). + */ + up_read(¤t->mm->mmap_sem); + pagefault_out_of_memory(); +} + +static void do_sigbus(struct pt_regs *regs, + unsigned long error_code, unsigned long address) +{ + struct task_struct *tsk = current; + struct mm_struct *mm = tsk->mm; + + up_read(&mm->mmap_sem); + + /* Kernel mode? Handle exceptions or die */ + if (!(error_code & PF_USER)) + no_context(regs, error_code, address); +#ifdef CONFIG_X86_32 + /* User space => ok to do another page fault */ + if (is_prefetch(regs, error_code, address)) + return; +#endif + tsk->thread.cr2 = address; + tsk->thread.error_code = error_code; + tsk->thread.trap_no = 14; + force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk); +} + +static noinline void mm_fault_error(struct pt_regs *regs, + unsigned long error_code, unsigned long address, unsigned int fault) +{ + if (fault & VM_FAULT_OOM) + out_of_memory(regs, error_code, address); + else if (fault & VM_FAULT_SIGBUS) + do_sigbus(regs, error_code, address); + else + BUG(); +} + static int spurious_fault_check(unsigned long error_code, pte_t *pte) { if ((error_code & PF_WRITE) && !pte_write(*pte)) @@ -448,8 +638,8 @@ static int spurious_fault_check(unsigned long error_code, pte_t *pte) * There are no security implications to leaving a stale TLB when * increasing the permissions on a page. */ -static int spurious_fault(unsigned long address, - unsigned long error_code) +static noinline int spurious_fault(unsigned long error_code, + unsigned long address) { pgd_t *pgd; pud_t *pud; @@ -494,7 +684,7 @@ static int spurious_fault(unsigned long address, * * This assumes no large pages in there. */ -static int vmalloc_fault(unsigned long address) +static noinline int vmalloc_fault(unsigned long address) { #ifdef CONFIG_X86_32 unsigned long pgd_paddr; @@ -573,6 +763,25 @@ static int vmalloc_fault(unsigned long address) int show_unhandled_signals = 1; +static inline int access_error(unsigned long error_code, int write, + struct vm_area_struct *vma) +{ + if (write) { + /* write, present and write, not present */ + if (unlikely(!(vma->vm_flags & VM_WRITE))) + return 1; + } else if (unlikely(error_code & PF_PROT)) { + /* read, present */ + return 1; + } else { + /* read, not present */ + if (unlikely(!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE)))) + return 1; + } + + return 0; +} + /* * This routine handles page faults. It determines the address, * and the problem, and then passes it off to one of the appropriate @@ -583,16 +792,12 @@ asmlinkage #endif void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code) { + unsigned long address; struct task_struct *tsk; struct mm_struct *mm; struct vm_area_struct *vma; - unsigned long address; - int write, si_code; + int write; int fault; -#ifdef CONFIG_X86_64 - unsigned long flags; - int sig; -#endif tsk = current; mm = tsk->mm; @@ -601,9 +806,7 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code) /* get the address */ address = read_cr2(); - si_code = SEGV_MAPERR; - - if (notify_page_fault(regs)) + if (unlikely(notify_page_fault(regs))) return; if (unlikely(kmmio_fault(regs, address))) return; @@ -631,17 +834,17 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code) return; /* Can handle a stale RO->RW TLB */ - if (spurious_fault(address, error_code)) + if (spurious_fault(error_code, address)) return; /* * Don't take the mm semaphore here. If we fixup a prefetch * fault we could otherwise deadlock. */ - goto bad_area_nosemaphore; + bad_area_nosemaphore(regs, error_code, address); + return; } - /* * It's safe to allow irq's after cr2 has been saved and the * vmalloc fault has been handled. @@ -657,15 +860,17 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code) #ifdef CONFIG_X86_64 if (unlikely(error_code & PF_RSVD)) - pgtable_bad(address, regs, error_code); + pgtable_bad(regs, error_code, address); #endif /* * If we're in an interrupt, have no user context or are running in an * atomic region then we must not take the fault. */ - if (unlikely(in_atomic() || !mm)) - goto bad_area_nosemaphore; + if (unlikely(in_atomic() || !mm)) { + bad_area_nosemaphore(regs, error_code, address); + return; + } /* * When running in the kernel we expect faults to occur only to @@ -683,20 +888,26 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code) * source. If this is invalid we can skip the address space check, * thus avoiding the deadlock. */ - if (!down_read_trylock(&mm->mmap_sem)) { + if (unlikely(!down_read_trylock(&mm->mmap_sem))) { if ((error_code & PF_USER) == 0 && - !search_exception_tables(regs->ip)) - goto bad_area_nosemaphore; + !search_exception_tables(regs->ip)) { + bad_area_nosemaphore(regs, error_code, address); + return; + } down_read(&mm->mmap_sem); } vma = find_vma(mm, address); - if (!vma) - goto bad_area; - if (vma->vm_start <= address) + if (unlikely(!vma)) { + bad_area(regs, error_code, address); + return; + } + if (likely(vma->vm_start <= address)) goto good_area; - if (!(vma->vm_flags & VM_GROWSDOWN)) - goto bad_area; + if (unlikely(!(vma->vm_flags & VM_GROWSDOWN))) { + bad_area(regs, error_code, address); + return; + } if (error_code & PF_USER) { /* * Accessing the stack below %sp is always a bug. @@ -704,31 +915,25 @@ void __kprobes do_page_fault(struct pt_regs *regs, unsigned long error_code) * and pusha to work. ("enter $65535,$31" pushes * 32 pointers and then decrements %sp by 65535.) */ - if (address + 65536 + 32 * sizeof(unsigned long) < regs->sp) - goto bad_area; + if (unlikely(address + 65536 + 32 * sizeof(unsigned long) < regs->sp)) { + bad_area(regs, error_code, address); + return; + } } - if (expand_stack(vma, address)) - goto bad_area; -/* - * Ok, we have a good vm_area for this memory access, so - * we can handle it.. - */ + if (unlikely(expand_stack(vma, address))) { + bad_area(regs, error_code, address); + return; + } + + /* + * Ok, we have a good vm_area for this memory access, so + * we can handle it.. + */ good_area: - si_code = SEGV_ACCERR; - write = 0; - switch (error_code & (PF_PROT|PF_WRITE)) { - default: /* 3: write, present */ - /* fall through */ - case PF_WRITE: /* write, not present */ - if (!(vma->vm_flags & VM_WRITE)) - goto bad_area; - write++; - break; - case PF_PROT: /* read, present */ - goto bad_area; - case 0: /* read, not present */ - if (!(vma->vm_flags & (VM_READ | VM_EXEC | VM_WRITE))) - goto bad_area; + write = error_code & PF_WRITE; + if (unlikely(access_error(error_code, write, vma))) { + bad_area_access_error(regs, error_code, address); + return; } /* @@ -738,11 +943,8 @@ good_area: */ fault = handle_mm_fault(mm, vma, address, write); if (unlikely(fault & VM_FAULT_ERROR)) { - if (fault & VM_FAULT_OOM) - goto out_of_memory; - else if (fault & VM_FAULT_SIGBUS) - goto do_sigbus; - BUG(); + mm_fault_error(regs, error_code, address, fault); + return; } if (fault & VM_FAULT_MAJOR) tsk->maj_flt++; @@ -760,128 +962,6 @@ good_area: } #endif up_read(&mm->mmap_sem); - return; - -/* - * Something tried to access memory that isn't in our memory map.. - * Fix it, but check if it's kernel or user first.. - */ -bad_area: - up_read(&mm->mmap_sem); - -bad_area_nosemaphore: - /* User mode accesses just cause a SIGSEGV */ - if (error_code & PF_USER) { - /* - * It's possible to have interrupts off here. - */ - local_irq_enable(); - - /* - * Valid to do another page fault here because this one came - * from user space. - */ - if (is_prefetch(regs, address, error_code)) - return; - - if (is_errata100(regs, address)) - return; - - if (show_unhandled_signals && unhandled_signal(tsk, SIGSEGV) && - printk_ratelimit()) { - printk( - "%s%s[%d]: segfault at %lx ip %p sp %p error %lx", - task_pid_nr(tsk) > 1 ? KERN_INFO : KERN_EMERG, - tsk->comm, task_pid_nr(tsk), address, - (void *) regs->ip, (void *) regs->sp, error_code); - print_vma_addr(" in ", regs->ip); - printk("\n"); - } - - tsk->thread.cr2 = address; - /* Kernel addresses are always protection faults */ - tsk->thread.error_code = error_code | (address >= TASK_SIZE); - tsk->thread.trap_no = 14; - force_sig_info_fault(SIGSEGV, si_code, address, tsk); - return; - } - - if (is_f00f_bug(regs, address)) - return; - -no_context: - /* Are we prepared to handle this kernel fault? */ - if (fixup_exception(regs)) - return; - - /* - * X86_32 - * Valid to do another page fault here, because if this fault - * had been triggered by is_prefetch fixup_exception would have - * handled it. - * - * X86_64 - * Hall of shame of CPU/BIOS bugs. - */ - if (is_prefetch(regs, address, error_code)) - return; - - if (is_errata93(regs, address)) - return; - -/* - * Oops. The kernel tried to access some bad page. We'll have to - * terminate things with extreme prejudice. - */ -#ifdef CONFIG_X86_32 - bust_spinlocks(1); -#else - flags = oops_begin(); -#endif - - show_fault_oops(regs, error_code, address); - - tsk->thread.cr2 = address; - tsk->thread.trap_no = 14; - tsk->thread.error_code = error_code; - -#ifdef CONFIG_X86_32 - die("Oops", regs, error_code); - bust_spinlocks(0); - do_exit(SIGKILL); -#else - sig = SIGKILL; - if (__die("Oops", regs, error_code)) - sig = 0; - /* Executive summary in case the body of the oops scrolled away */ - printk(KERN_EMERG "CR2: %016lx\n", address); - oops_end(flags, regs, sig); -#endif - -out_of_memory: - /* - * We ran out of memory, call the OOM killer, and return the userspace - * (which will retry the fault, or kill us if we got oom-killed). - */ - up_read(&mm->mmap_sem); - pagefault_out_of_memory(); - return; - -do_sigbus: - up_read(&mm->mmap_sem); - - /* Kernel mode? Handle exceptions or die */ - if (!(error_code & PF_USER)) - goto no_context; -#ifdef CONFIG_X86_32 - /* User space => ok to do another page fault */ - if (is_prefetch(regs, address, error_code)) - return; -#endif - tsk->thread.cr2 = address; - tsk->thread.error_code = error_code; - tsk->thread.trap_no = 14; - force_sig_info_fault(SIGBUS, BUS_ADRERR, address, tsk); } DEFINE_SPINLOCK(pgd_lock); diff --git a/arch/x86/mm/init_32.c b/arch/x86/mm/init_32.c index 88f1b10de3b..00263bf07a8 100644 --- a/arch/x86/mm/init_32.c +++ b/arch/x86/mm/init_32.c @@ -49,7 +49,6 @@ #include <asm/paravirt.h> #include <asm/setup.h> #include <asm/cacheflush.h> -#include <asm/smp.h> unsigned int __VMALLOC_RESERVE = 128 << 20; @@ -138,6 +137,47 @@ static pte_t * __init one_page_table_init(pmd_t *pmd) return pte_offset_kernel(pmd, 0); } +static pte_t *__init page_table_kmap_check(pte_t *pte, pmd_t *pmd, + unsigned long vaddr, pte_t *lastpte) +{ +#ifdef CONFIG_HIGHMEM + /* + * Something (early fixmap) may already have put a pte + * page here, which causes the page table allocation + * to become nonlinear. Attempt to fix it, and if it + * is still nonlinear then we have to bug. + */ + int pmd_idx_kmap_begin = fix_to_virt(FIX_KMAP_END) >> PMD_SHIFT; + int pmd_idx_kmap_end = fix_to_virt(FIX_KMAP_BEGIN) >> PMD_SHIFT; + + if (pmd_idx_kmap_begin != pmd_idx_kmap_end + && (vaddr >> PMD_SHIFT) >= pmd_idx_kmap_begin + && (vaddr >> PMD_SHIFT) <= pmd_idx_kmap_end + && ((__pa(pte) >> PAGE_SHIFT) < table_start + || (__pa(pte) >> PAGE_SHIFT) >= table_end)) { + pte_t *newpte; + int i; + + BUG_ON(after_init_bootmem); + newpte = alloc_low_page(); + for (i = 0; i < PTRS_PER_PTE; i++) + set_pte(newpte + i, pte[i]); + + paravirt_alloc_pte(&init_mm, __pa(newpte) >> PAGE_SHIFT); + set_pmd(pmd, __pmd(__pa(newpte)|_PAGE_TABLE)); + BUG_ON(newpte != pte_offset_kernel(pmd, 0)); + __flush_tlb_all(); + + paravirt_release_pte(__pa(pte) >> PAGE_SHIFT); + pte = newpte; + } + BUG_ON(vaddr < fix_to_virt(FIX_KMAP_BEGIN - 1) + && vaddr > fix_to_virt(FIX_KMAP_END) + && lastpte && lastpte + PTRS_PER_PTE != pte); +#endif + return pte; +} + /* * This function initializes a certain range of kernel virtual memory * with new bootmem page tables, everywhere page tables are missing in @@ -154,6 +194,7 @@ page_table_range_init(unsigned long start, unsigned long end, pgd_t *pgd_base) unsigned long vaddr; pgd_t *pgd; pmd_t *pmd; + pte_t *pte = NULL; vaddr = start; pgd_idx = pgd_index(vaddr); @@ -165,7 +206,8 @@ page_table_range_init(unsigned long start, unsigned long end, pgd_t *pgd_base) pmd = pmd + pmd_index(vaddr); for (; (pmd_idx < PTRS_PER_PMD) && (vaddr != end); pmd++, pmd_idx++) { - one_page_table_init(pmd); + pte = page_table_kmap_check(one_page_table_init(pmd), + pmd, vaddr, pte); vaddr += PMD_SIZE; } @@ -508,7 +550,6 @@ static void __init early_ioremap_page_table_range_init(pgd_t *pgd_base) * Fixed mappings, only the page table structure has to be * created - mappings will be set by set_fixmap(): */ - early_ioremap_clear(); vaddr = __fix_to_virt(__end_of_fixed_addresses - 1) & PMD_MASK; end = (FIXADDR_TOP + PMD_SIZE - 1) & PMD_MASK; page_table_range_init(vaddr, end, pgd_base); @@ -801,7 +842,7 @@ static void __init find_early_table_space(unsigned long end, int use_pse) tables += PAGE_ALIGN(ptes * sizeof(pte_t)); /* for fixmap */ - tables += PAGE_SIZE * 2; + tables += PAGE_ALIGN(__end_of_fixed_addresses * sizeof(pte_t)); /* * RED-PEN putting page tables only on node 0 could diff --git a/arch/x86/mm/init_64.c b/arch/x86/mm/init_64.c index 23f68e77ad1..e6d36b49025 100644 --- a/arch/x86/mm/init_64.c +++ b/arch/x86/mm/init_64.c @@ -596,7 +596,7 @@ static void __init init_gbpages(void) direct_gbpages = 0; } -static unsigned long __init kernel_physical_mapping_init(unsigned long start, +static unsigned long __meminit kernel_physical_mapping_init(unsigned long start, unsigned long end, unsigned long page_size_mask) { diff --git a/arch/x86/mm/iomap_32.c b/arch/x86/mm/iomap_32.c index d0151d8ce45..ca53224fc56 100644 --- a/arch/x86/mm/iomap_32.c +++ b/arch/x86/mm/iomap_32.c @@ -17,6 +17,7 @@ */ #include <asm/iomap.h> +#include <asm/pat.h> #include <linux/module.h> /* Map 'pfn' using fixed map 'type' and protections 'prot' @@ -29,6 +30,15 @@ iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot) pagefault_disable(); + /* + * For non-PAT systems, promote PAGE_KERNEL_WC to PAGE_KERNEL_UC_MINUS. + * PAGE_KERNEL_WC maps to PWT, which translates to uncached if the + * MTRR is UC or WC. UC_MINUS gets the real intention, of the + * user, which is "WC if the MTRR is WC, UC if you can't do that." + */ + if (!pat_enabled && pgprot_val(prot) == pgprot_val(PAGE_KERNEL_WC)) + prot = PAGE_KERNEL_UC_MINUS; + idx = type + KM_TYPE_NR*smp_processor_id(); vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx); set_pte(kmap_pte-idx, pfn_pte(pfn, prot)); diff --git a/arch/x86/mm/ioremap.c b/arch/x86/mm/ioremap.c index 2ddb1e79a19..1448bcb7f22 100644 --- a/arch/x86/mm/ioremap.c +++ b/arch/x86/mm/ioremap.c @@ -557,34 +557,9 @@ void __init early_ioremap_init(void) } } -void __init early_ioremap_clear(void) -{ - pmd_t *pmd; - - if (early_ioremap_debug) - printk(KERN_INFO "early_ioremap_clear()\n"); - - pmd = early_ioremap_pmd(fix_to_virt(FIX_BTMAP_BEGIN)); - pmd_clear(pmd); - paravirt_release_pte(__pa(bm_pte) >> PAGE_SHIFT); - __flush_tlb_all(); -} - void __init early_ioremap_reset(void) { - enum fixed_addresses idx; - unsigned long addr, phys; - pte_t *pte; - after_paging_init = 1; - for (idx = FIX_BTMAP_BEGIN; idx >= FIX_BTMAP_END; idx--) { - addr = fix_to_virt(idx); - pte = early_ioremap_pte(addr); - if (pte_present(*pte)) { - phys = pte_val(*pte) & PAGE_MASK; - set_fixmap(idx, phys); - } - } } static void __init __early_set_fixmap(enum fixed_addresses idx, diff --git a/arch/x86/mm/numa_64.c b/arch/x86/mm/numa_64.c index 71a14f89f89..08d140fbc31 100644 --- a/arch/x86/mm/numa_64.c +++ b/arch/x86/mm/numa_64.c @@ -20,6 +20,12 @@ #include <asm/acpi.h> #include <asm/k8.h> +#ifdef CONFIG_DEBUG_PER_CPU_MAPS +# define DBG(x...) printk(KERN_DEBUG x) +#else +# define DBG(x...) +#endif + struct pglist_data *node_data[MAX_NUMNODES] __read_mostly; EXPORT_SYMBOL(node_data); @@ -33,6 +39,21 @@ int numa_off __initdata; static unsigned long __initdata nodemap_addr; static unsigned long __initdata nodemap_size; +DEFINE_PER_CPU(int, node_number) = 0; +EXPORT_PER_CPU_SYMBOL(node_number); + +/* + * Map cpu index to node index + */ +DEFINE_EARLY_PER_CPU(int, x86_cpu_to_node_map, NUMA_NO_NODE); +EXPORT_EARLY_PER_CPU_SYMBOL(x86_cpu_to_node_map); + +/* + * Which logical CPUs are on which nodes + */ +cpumask_t *node_to_cpumask_map; +EXPORT_SYMBOL(node_to_cpumask_map); + /* * Given a shift value, try to populate memnodemap[] * Returns : @@ -640,3 +661,199 @@ void __init init_cpu_to_node(void) #endif +/* + * Allocate node_to_cpumask_map based on number of available nodes + * Requires node_possible_map to be valid. + * + * Note: node_to_cpumask() is not valid until after this is done. + * (Use CONFIG_DEBUG_PER_CPU_MAPS to check this.) + */ +void __init setup_node_to_cpumask_map(void) +{ + unsigned int node, num = 0; + cpumask_t *map; + + /* setup nr_node_ids if not done yet */ + if (nr_node_ids == MAX_NUMNODES) { + for_each_node_mask(node, node_possible_map) + num = node; + nr_node_ids = num + 1; + } + + /* allocate the map */ + map = alloc_bootmem_low(nr_node_ids * sizeof(cpumask_t)); + DBG("node_to_cpumask_map at %p for %d nodes\n", map, nr_node_ids); + + pr_debug("Node to cpumask map at %p for %d nodes\n", + map, nr_node_ids); + + /* node_to_cpumask() will now work */ + node_to_cpumask_map = map; +} + +void __cpuinit numa_set_node(int cpu, int node) +{ + int *cpu_to_node_map = early_per_cpu_ptr(x86_cpu_to_node_map); + + /* early setting, no percpu area yet */ + if (cpu_to_node_map) { + cpu_to_node_map[cpu] = node; + return; + } + +#ifdef CONFIG_DEBUG_PER_CPU_MAPS + if (cpu >= nr_cpu_ids || !per_cpu_offset(cpu)) { + printk(KERN_ERR "numa_set_node: invalid cpu# (%d)\n", cpu); + dump_stack(); + return; + } +#endif + per_cpu(x86_cpu_to_node_map, cpu) = node; + + if (node != NUMA_NO_NODE) + per_cpu(node_number, cpu) = node; +} + +void __cpuinit numa_clear_node(int cpu) +{ + numa_set_node(cpu, NUMA_NO_NODE); +} + +#ifndef CONFIG_DEBUG_PER_CPU_MAPS + +void __cpuinit numa_add_cpu(int cpu) +{ + cpu_set(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]); +} + +void __cpuinit numa_remove_cpu(int cpu) +{ + cpu_clear(cpu, node_to_cpumask_map[early_cpu_to_node(cpu)]); +} + +#else /* CONFIG_DEBUG_PER_CPU_MAPS */ + +/* + * --------- debug versions of the numa functions --------- + */ +static void __cpuinit numa_set_cpumask(int cpu, int enable) +{ + int node = early_cpu_to_node(cpu); + cpumask_t *mask; + char buf[64]; + + if (node_to_cpumask_map == NULL) { + printk(KERN_ERR "node_to_cpumask_map NULL\n"); + dump_stack(); + return; + } + + mask = &node_to_cpumask_map[node]; + if (enable) + cpu_set(cpu, *mask); + else + cpu_clear(cpu, *mask); + + cpulist_scnprintf(buf, sizeof(buf), mask); + printk(KERN_DEBUG "%s cpu %d node %d: mask now %s\n", + enable ? "numa_add_cpu" : "numa_remove_cpu", cpu, node, buf); +} + +void __cpuinit numa_add_cpu(int cpu) +{ + numa_set_cpumask(cpu, 1); +} + +void __cpuinit numa_remove_cpu(int cpu) +{ + numa_set_cpumask(cpu, 0); +} + +int cpu_to_node(int cpu) +{ + if (early_per_cpu_ptr(x86_cpu_to_node_map)) { + printk(KERN_WARNING + "cpu_to_node(%d): usage too early!\n", cpu); + dump_stack(); + return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu]; + } + return per_cpu(x86_cpu_to_node_map, cpu); +} +EXPORT_SYMBOL(cpu_to_node); + +/* + * Same function as cpu_to_node() but used if called before the + * per_cpu areas are setup. + */ +int early_cpu_to_node(int cpu) +{ + if (early_per_cpu_ptr(x86_cpu_to_node_map)) + return early_per_cpu_ptr(x86_cpu_to_node_map)[cpu]; + + if (!per_cpu_offset(cpu)) { + printk(KERN_WARNING + "early_cpu_to_node(%d): no per_cpu area!\n", cpu); + dump_stack(); + return NUMA_NO_NODE; + } + return per_cpu(x86_cpu_to_node_map, cpu); +} + + +/* empty cpumask */ +static const cpumask_t cpu_mask_none; + +/* + * Returns a pointer to the bitmask of CPUs on Node 'node'. + */ +const cpumask_t *cpumask_of_node(int node) +{ + if (node_to_cpumask_map == NULL) { + printk(KERN_WARNING + "cpumask_of_node(%d): no node_to_cpumask_map!\n", + node); + dump_stack(); + return (const cpumask_t *)&cpu_online_map; + } + if (node >= nr_node_ids) { + printk(KERN_WARNING + "cpumask_of_node(%d): node > nr_node_ids(%d)\n", + node, nr_node_ids); + dump_stack(); + return &cpu_mask_none; + } + return &node_to_cpumask_map[node]; +} +EXPORT_SYMBOL(cpumask_of_node); + +/* + * Returns a bitmask of CPUs on Node 'node'. + * + * Side note: this function creates the returned cpumask on the stack + * so with a high NR_CPUS count, excessive stack space is used. The + * node_to_cpumask_ptr function should be used whenever possible. + */ +cpumask_t node_to_cpumask(int node) +{ + if (node_to_cpumask_map == NULL) { + printk(KERN_WARNING + "node_to_cpumask(%d): no node_to_cpumask_map!\n", node); + dump_stack(); + return cpu_online_map; + } + if (node >= nr_node_ids) { + printk(KERN_WARNING + "node_to_cpumask(%d): node > nr_node_ids(%d)\n", + node, nr_node_ids); + dump_stack(); + return cpu_mask_none; + } + return node_to_cpumask_map[node]; +} +EXPORT_SYMBOL(node_to_cpumask); + +/* + * --------- end of debug versions of the numa functions --------- + */ + +#endif /* CONFIG_DEBUG_PER_CPU_MAPS */ diff --git a/arch/x86/mm/pageattr.c b/arch/x86/mm/pageattr.c index e89d24815f2..84ba74820ad 100644 --- a/arch/x86/mm/pageattr.c +++ b/arch/x86/mm/pageattr.c @@ -534,6 +534,36 @@ out_unlock: return 0; } +static int __cpa_process_fault(struct cpa_data *cpa, unsigned long vaddr, + int primary) +{ + /* + * Ignore all non primary paths. + */ + if (!primary) + return 0; + + /* + * Ignore the NULL PTE for kernel identity mapping, as it is expected + * to have holes. + * Also set numpages to '1' indicating that we processed cpa req for + * one virtual address page and its pfn. TBD: numpages can be set based + * on the initial value and the level returned by lookup_address(). + */ + if (within(vaddr, PAGE_OFFSET, + PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT))) { + cpa->numpages = 1; + cpa->pfn = __pa(vaddr) >> PAGE_SHIFT; + return 0; + } else { + WARN(1, KERN_WARNING "CPA: called for zero pte. " + "vaddr = %lx cpa->vaddr = %lx\n", vaddr, + *cpa->vaddr); + + return -EFAULT; + } +} + static int __change_page_attr(struct cpa_data *cpa, int primary) { unsigned long address; @@ -549,17 +579,11 @@ static int __change_page_attr(struct cpa_data *cpa, int primary) repeat: kpte = lookup_address(address, &level); if (!kpte) - return 0; + return __cpa_process_fault(cpa, address, primary); old_pte = *kpte; - if (!pte_val(old_pte)) { - if (!primary) - return 0; - WARN(1, KERN_WARNING "CPA: called for zero pte. " - "vaddr = %lx cpa->vaddr = %lx\n", address, - *cpa->vaddr); - return -EINVAL; - } + if (!pte_val(old_pte)) + return __cpa_process_fault(cpa, address, primary); if (level == PG_LEVEL_4K) { pte_t new_pte; @@ -657,12 +681,7 @@ static int cpa_process_alias(struct cpa_data *cpa) vaddr = *cpa->vaddr; if (!(within(vaddr, PAGE_OFFSET, - PAGE_OFFSET + (max_low_pfn_mapped << PAGE_SHIFT)) -#ifdef CONFIG_X86_64 - || within(vaddr, PAGE_OFFSET + (1UL<<32), - PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT)) -#endif - )) { + PAGE_OFFSET + (max_pfn_mapped << PAGE_SHIFT)))) { alias_cpa = *cpa; temp_cpa_vaddr = (unsigned long) __va(cpa->pfn << PAGE_SHIFT); diff --git a/arch/x86/mm/pat.c b/arch/x86/mm/pat.c index 8b08fb95527..9127e31c726 100644 --- a/arch/x86/mm/pat.c +++ b/arch/x86/mm/pat.c @@ -30,7 +30,7 @@ #ifdef CONFIG_X86_PAT int __read_mostly pat_enabled = 1; -void __cpuinit pat_disable(char *reason) +void __cpuinit pat_disable(const char *reason) { pat_enabled = 0; printk(KERN_INFO "%s\n", reason); @@ -42,6 +42,11 @@ static int __init nopat(char *str) return 0; } early_param("nopat", nopat); +#else +static inline void pat_disable(const char *reason) +{ + (void)reason; +} #endif @@ -78,16 +83,20 @@ void pat_init(void) if (!pat_enabled) return; - /* Paranoia check. */ - if (!cpu_has_pat && boot_pat_state) { - /* - * If this happens we are on a secondary CPU, but - * switched to PAT on the boot CPU. We have no way to - * undo PAT. - */ - printk(KERN_ERR "PAT enabled, " - "but not supported by secondary CPU\n"); - BUG(); + if (!cpu_has_pat) { + if (!boot_pat_state) { + pat_disable("PAT not supported by CPU."); + return; + } else { + /* + * If this happens we are on a secondary CPU, but + * switched to PAT on the boot CPU. We have no way to + * undo PAT. + */ + printk(KERN_ERR "PAT enabled, " + "but not supported by secondary CPU\n"); + BUG(); + } } /* Set PWT to Write-Combining. All other bits stay the same */ @@ -333,11 +342,23 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, req_type & _PAGE_CACHE_MASK); } - is_range_ram = pagerange_is_ram(start, end); - if (is_range_ram == 1) - return reserve_ram_pages_type(start, end, req_type, new_type); - else if (is_range_ram < 0) - return -EINVAL; + if (new_type) + *new_type = actual_type; + + /* + * For legacy reasons, some parts of the physical address range in the + * legacy 1MB region is treated as non-RAM (even when listed as RAM in + * the e820 tables). So we will track the memory attributes of this + * legacy 1MB region using the linear memtype_list always. + */ + if (end >= ISA_END_ADDRESS) { + is_range_ram = pagerange_is_ram(start, end); + if (is_range_ram == 1) + return reserve_ram_pages_type(start, end, req_type, + new_type); + else if (is_range_ram < 0) + return -EINVAL; + } new = kmalloc(sizeof(struct memtype), GFP_KERNEL); if (!new) @@ -347,9 +368,6 @@ int reserve_memtype(u64 start, u64 end, unsigned long req_type, new->end = end; new->type = actual_type; - if (new_type) - *new_type = actual_type; - spin_lock(&memtype_lock); if (cached_entry && start >= cached_start) @@ -437,11 +455,19 @@ int free_memtype(u64 start, u64 end) if (is_ISA_range(start, end - 1)) return 0; - is_range_ram = pagerange_is_ram(start, end); - if (is_range_ram == 1) - return free_ram_pages_type(start, end); - else if (is_range_ram < 0) - return -EINVAL; + /* + * For legacy reasons, some parts of the physical address range in the + * legacy 1MB region is treated as non-RAM (even when listed as RAM in + * the e820 tables). So we will track the memory attributes of this + * legacy 1MB region using the linear memtype_list always. + */ + if (end >= ISA_END_ADDRESS) { + is_range_ram = pagerange_is_ram(start, end); + if (is_range_ram == 1) + return free_ram_pages_type(start, end); + else if (is_range_ram < 0) + return -EINVAL; + } spin_lock(&memtype_lock); list_for_each_entry(entry, &memtype_list, nd) { diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c index 09737c8af07..15df1baee10 100644 --- a/arch/x86/mm/srat_64.c +++ b/arch/x86/mm/srat_64.c @@ -21,6 +21,7 @@ #include <asm/numa.h> #include <asm/e820.h> #include <asm/genapic.h> +#include <asm/uv/uv.h> int acpi_numa __initdata; diff --git a/arch/x86/kernel/tlb_64.c b/arch/x86/mm/tlb.c index f8be6f1d2e4..72a6d4ebe34 100644 --- a/arch/x86/kernel/tlb_64.c +++ b/arch/x86/mm/tlb.c @@ -1,22 +1,18 @@ #include <linux/init.h> #include <linux/mm.h> -#include <linux/delay.h> #include <linux/spinlock.h> #include <linux/smp.h> -#include <linux/kernel_stat.h> -#include <linux/mc146818rtc.h> #include <linux/interrupt.h> +#include <linux/module.h> -#include <asm/mtrr.h> -#include <asm/pgalloc.h> #include <asm/tlbflush.h> #include <asm/mmu_context.h> -#include <asm/proto.h> -#include <asm/apicdef.h> -#include <asm/idle.h> -#include <asm/uv/uv_hub.h> -#include <asm/uv/uv_bau.h> +#include <asm/apic.h> +#include <asm/uv/uv.h> + +DEFINE_PER_CPU_SHARED_ALIGNED(struct tlb_state, cpu_tlbstate) + = { &init_mm, 0, }; #include <mach_ipi.h> /* @@ -33,7 +29,7 @@ * To avoid global state use 8 different call vectors. * Each CPU uses a specific vector to trigger flushes on other * CPUs. Depending on the received vector the target CPUs look into - * the right per cpu variable for the flush data. + * the right array slot for the flush data. * * With more than 8 CPUs they are hashed to the 8 available * vectors. The limited global vector space forces us to this right now. @@ -43,18 +39,18 @@ union smp_flush_state { struct { - cpumask_t flush_cpumask; struct mm_struct *flush_mm; unsigned long flush_va; spinlock_t tlbstate_lock; + DECLARE_BITMAP(flush_cpumask, NR_CPUS); }; - char pad[SMP_CACHE_BYTES]; -} ____cacheline_aligned; + char pad[CONFIG_X86_INTERNODE_CACHE_BYTES]; +} ____cacheline_internodealigned_in_smp; /* State is put into the per CPU data section, but padded to a full cache line because other CPUs can access it and we don't want false sharing in the per cpu data segment. */ -static DEFINE_PER_CPU(union smp_flush_state, flush_state); +static union smp_flush_state flush_state[NUM_INVALIDATE_TLB_VECTORS]; /* * We cannot call mmdrop() because we are in interrupt context, @@ -62,9 +58,9 @@ static DEFINE_PER_CPU(union smp_flush_state, flush_state); */ void leave_mm(int cpu) { - if (read_pda(mmu_state) == TLBSTATE_OK) + if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK) BUG(); - cpu_clear(cpu, read_pda(active_mm)->cpu_vm_mask); + cpu_clear(cpu, percpu_read(cpu_tlbstate.active_mm)->cpu_vm_mask); load_cr3(swapper_pg_dir); } EXPORT_SYMBOL_GPL(leave_mm); @@ -117,10 +113,20 @@ EXPORT_SYMBOL_GPL(leave_mm); * Interrupts are disabled. */ -asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs) +/* + * FIXME: use of asmlinkage is not consistent. On x86_64 it's noop + * but still used for documentation purpose but the usage is slightly + * inconsistent. On x86_32, asmlinkage is regparm(0) but interrupt + * entry calls in with the first parameter in %eax. Maybe define + * intrlinkage? + */ +#ifdef CONFIG_X86_64 +asmlinkage +#endif +void smp_invalidate_interrupt(struct pt_regs *regs) { - int cpu; - int sender; + unsigned int cpu; + unsigned int sender; union smp_flush_state *f; cpu = smp_processor_id(); @@ -129,9 +135,9 @@ asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs) * Use that to determine where the sender put the data. */ sender = ~regs->orig_ax - INVALIDATE_TLB_VECTOR_START; - f = &per_cpu(flush_state, sender); + f = &flush_state[sender]; - if (!cpu_isset(cpu, f->flush_cpumask)) + if (!cpumask_test_cpu(cpu, to_cpumask(f->flush_cpumask))) goto out; /* * This was a BUG() but until someone can quote me the @@ -142,8 +148,8 @@ asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs) * BUG(); */ - if (f->flush_mm == read_pda(active_mm)) { - if (read_pda(mmu_state) == TLBSTATE_OK) { + if (f->flush_mm == percpu_read(cpu_tlbstate.active_mm)) { + if (percpu_read(cpu_tlbstate.state) == TLBSTATE_OK) { if (f->flush_va == TLB_FLUSH_ALL) local_flush_tlb(); else @@ -153,23 +159,21 @@ asmlinkage void smp_invalidate_interrupt(struct pt_regs *regs) } out: ack_APIC_irq(); - cpu_clear(cpu, f->flush_cpumask); + smp_mb__before_clear_bit(); + cpumask_clear_cpu(cpu, to_cpumask(f->flush_cpumask)); + smp_mb__after_clear_bit(); inc_irq_stat(irq_tlb_count); } -void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm, - unsigned long va) +static void flush_tlb_others_ipi(const struct cpumask *cpumask, + struct mm_struct *mm, unsigned long va) { - int sender; + unsigned int sender; union smp_flush_state *f; - cpumask_t cpumask = *cpumaskp; - - if (is_uv_system() && uv_flush_tlb_others(&cpumask, mm, va)) - return; /* Caller has disabled preemption */ sender = smp_processor_id() % NUM_INVALIDATE_TLB_VECTORS; - f = &per_cpu(flush_state, sender); + f = &flush_state[sender]; /* * Could avoid this lock when @@ -180,7 +184,8 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm, f->flush_mm = mm; f->flush_va = va; - cpus_or(f->flush_cpumask, cpumask, f->flush_cpumask); + cpumask_andnot(to_cpumask(f->flush_cpumask), + cpumask, cpumask_of(smp_processor_id())); /* * Make the above memory operations globally visible before @@ -191,9 +196,10 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm, * We have to send the IPI only to * CPUs affected. */ - send_IPI_mask(&cpumask, INVALIDATE_TLB_VECTOR_START + sender); + send_IPI_mask(to_cpumask(f->flush_cpumask), + INVALIDATE_TLB_VECTOR_START + sender); - while (!cpus_empty(f->flush_cpumask)) + while (!cpumask_empty(to_cpumask(f->flush_cpumask))) cpu_relax(); f->flush_mm = NULL; @@ -201,12 +207,28 @@ void native_flush_tlb_others(const cpumask_t *cpumaskp, struct mm_struct *mm, spin_unlock(&f->tlbstate_lock); } +void native_flush_tlb_others(const struct cpumask *cpumask, + struct mm_struct *mm, unsigned long va) +{ + if (is_uv_system()) { + unsigned int cpu; + + cpu = get_cpu(); + cpumask = uv_flush_tlb_others(cpumask, mm, va, cpu); + if (cpumask) + flush_tlb_others_ipi(cpumask, mm, va); + put_cpu(); + return; + } + flush_tlb_others_ipi(cpumask, mm, va); +} + static int __cpuinit init_smp_flush(void) { int i; - for_each_possible_cpu(i) - spin_lock_init(&per_cpu(flush_state, i).tlbstate_lock); + for (i = 0; i < ARRAY_SIZE(flush_state); i++) + spin_lock_init(&flush_state[i].tlbstate_lock); return 0; } @@ -215,25 +237,18 @@ core_initcall(init_smp_flush); void flush_tlb_current_task(void) { struct mm_struct *mm = current->mm; - cpumask_t cpu_mask; preempt_disable(); - cpu_mask = mm->cpu_vm_mask; - cpu_clear(smp_processor_id(), cpu_mask); local_flush_tlb(); - if (!cpus_empty(cpu_mask)) - flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL); + if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids) + flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL); preempt_enable(); } void flush_tlb_mm(struct mm_struct *mm) { - cpumask_t cpu_mask; - preempt_disable(); - cpu_mask = mm->cpu_vm_mask; - cpu_clear(smp_processor_id(), cpu_mask); if (current->active_mm == mm) { if (current->mm) @@ -241,8 +256,8 @@ void flush_tlb_mm(struct mm_struct *mm) else leave_mm(smp_processor_id()); } - if (!cpus_empty(cpu_mask)) - flush_tlb_others(cpu_mask, mm, TLB_FLUSH_ALL); + if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids) + flush_tlb_others(&mm->cpu_vm_mask, mm, TLB_FLUSH_ALL); preempt_enable(); } @@ -250,11 +265,8 @@ void flush_tlb_mm(struct mm_struct *mm) void flush_tlb_page(struct vm_area_struct *vma, unsigned long va) { struct mm_struct *mm = vma->vm_mm; - cpumask_t cpu_mask; preempt_disable(); - cpu_mask = mm->cpu_vm_mask; - cpu_clear(smp_processor_id(), cpu_mask); if (current->active_mm == mm) { if (current->mm) @@ -263,8 +275,8 @@ void flush_tlb_page(struct vm_area_struct *vma, unsigned long va) leave_mm(smp_processor_id()); } - if (!cpus_empty(cpu_mask)) - flush_tlb_others(cpu_mask, mm, va); + if (cpumask_any_but(&mm->cpu_vm_mask, smp_processor_id()) < nr_cpu_ids) + flush_tlb_others(&mm->cpu_vm_mask, mm, va); preempt_enable(); } @@ -274,7 +286,7 @@ static void do_flush_tlb_all(void *info) unsigned long cpu = smp_processor_id(); __flush_tlb_all(); - if (read_pda(mmu_state) == TLBSTATE_LAZY) + if (percpu_read(cpu_tlbstate.state) == TLBSTATE_LAZY) leave_mm(cpu); } diff --git a/arch/x86/scripts/strip-symbols b/arch/x86/scripts/strip-symbols deleted file mode 100644 index a2f1ccb827c..00000000000 --- a/arch/x86/scripts/strip-symbols +++ /dev/null @@ -1 +0,0 @@ -__cpu_vendor_dev_X86_VENDOR_* diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index bea215230b2..6b3f7eef57e 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -634,35 +634,27 @@ static void xen_flush_tlb_single(unsigned long addr) preempt_enable(); } -static void xen_flush_tlb_others(const cpumask_t *cpus, struct mm_struct *mm, - unsigned long va) +static void xen_flush_tlb_others(const struct cpumask *cpus, + struct mm_struct *mm, unsigned long va) { struct { struct mmuext_op op; - cpumask_t mask; + DECLARE_BITMAP(mask, NR_CPUS); } *args; - cpumask_t cpumask = *cpus; struct multicall_space mcs; - /* - * A couple of (to be removed) sanity checks: - * - * - current CPU must not be in mask - * - mask must exist :) - */ - BUG_ON(cpus_empty(cpumask)); - BUG_ON(cpu_isset(smp_processor_id(), cpumask)); + BUG_ON(cpumask_empty(cpus)); BUG_ON(!mm); - /* If a CPU which we ran on has gone down, OK. */ - cpus_and(cpumask, cpumask, cpu_online_map); - if (cpus_empty(cpumask)) - return; - mcs = xen_mc_entry(sizeof(*args)); args = mcs.args; - args->mask = cpumask; - args->op.arg2.vcpumask = &args->mask; + args->op.arg2.vcpumask = to_cpumask(args->mask); + + /* Remove us, and any offline CPUS. */ + cpumask_and(to_cpumask(args->mask), cpus, cpu_online_mask); + cpumask_clear_cpu(smp_processor_id(), to_cpumask(args->mask)); + if (unlikely(cpumask_empty(to_cpumask(args->mask)))) + goto issue; if (va == TLB_FLUSH_ALL) { args->op.cmd = MMUEXT_TLB_FLUSH_MULTI; @@ -673,6 +665,7 @@ static void xen_flush_tlb_others(const cpumask_t *cpus, struct mm_struct *mm, MULTI_mmuext_op(mcs.mc, &args->op, 1, NULL, DOMID_SELF); +issue: xen_mc_issue(PARAVIRT_LAZY_MMU); } @@ -702,17 +695,17 @@ static void xen_write_cr0(unsigned long cr0) static void xen_write_cr2(unsigned long cr2) { - x86_read_percpu(xen_vcpu)->arch.cr2 = cr2; + percpu_read(xen_vcpu)->arch.cr2 = cr2; } static unsigned long xen_read_cr2(void) { - return x86_read_percpu(xen_vcpu)->arch.cr2; + return percpu_read(xen_vcpu)->arch.cr2; } static unsigned long xen_read_cr2_direct(void) { - return x86_read_percpu(xen_vcpu_info.arch.cr2); + return percpu_read(xen_vcpu_info.arch.cr2); } static void xen_write_cr4(unsigned long cr4) @@ -725,12 +718,12 @@ static void xen_write_cr4(unsigned long cr4) static unsigned long xen_read_cr3(void) { - return x86_read_percpu(xen_cr3); + return percpu_read(xen_cr3); } static void set_current_cr3(void *v) { - x86_write_percpu(xen_current_cr3, (unsigned long)v); + percpu_write(xen_current_cr3, (unsigned long)v); } static void __xen_write_cr3(bool kernel, unsigned long cr3) @@ -755,7 +748,7 @@ static void __xen_write_cr3(bool kernel, unsigned long cr3) MULTI_mmuext_op(mcs.mc, op, 1, NULL, DOMID_SELF); if (kernel) { - x86_write_percpu(xen_cr3, cr3); + percpu_write(xen_cr3, cr3); /* Update xen_current_cr3 once the batch has actually been submitted. */ @@ -771,7 +764,7 @@ static void xen_write_cr3(unsigned long cr3) /* Update while interrupts are disabled, so its atomic with respect to ipis */ - x86_write_percpu(xen_cr3, cr3); + percpu_write(xen_cr3, cr3); __xen_write_cr3(true, cr3); @@ -1314,7 +1307,6 @@ static const struct pv_mmu_ops xen_mmu_ops __initdata = { .ptep_modify_prot_commit = __ptep_modify_prot_commit, .pte_val = xen_pte_val, - .pte_flags = native_pte_flags, .pgd_val = xen_pgd_val, .make_pte = xen_make_pte, @@ -1652,7 +1644,6 @@ asmlinkage void __init xen_start_kernel(void) #ifdef CONFIG_X86_64 /* Disable until direct per-cpu data access. */ have_vcpu_info_placement = 0; - x86_64_init_pda(); #endif xen_smp_init(); diff --git a/arch/x86/xen/irq.c b/arch/x86/xen/irq.c index bb042608c60..2e8271431e1 100644 --- a/arch/x86/xen/irq.c +++ b/arch/x86/xen/irq.c @@ -39,7 +39,7 @@ static unsigned long xen_save_fl(void) struct vcpu_info *vcpu; unsigned long flags; - vcpu = x86_read_percpu(xen_vcpu); + vcpu = percpu_read(xen_vcpu); /* flag has opposite sense of mask */ flags = !vcpu->evtchn_upcall_mask; @@ -62,7 +62,7 @@ static void xen_restore_fl(unsigned long flags) make sure we're don't switch CPUs between getting the vcpu pointer and updating the mask. */ preempt_disable(); - vcpu = x86_read_percpu(xen_vcpu); + vcpu = percpu_read(xen_vcpu); vcpu->evtchn_upcall_mask = flags; preempt_enable_no_resched(); @@ -83,7 +83,7 @@ static void xen_irq_disable(void) make sure we're don't switch CPUs between getting the vcpu pointer and updating the mask. */ preempt_disable(); - x86_read_percpu(xen_vcpu)->evtchn_upcall_mask = 1; + percpu_read(xen_vcpu)->evtchn_upcall_mask = 1; preempt_enable_no_resched(); } @@ -96,7 +96,7 @@ static void xen_irq_enable(void) the caller is confused and is trying to re-enable interrupts on an indeterminate processor. */ - vcpu = x86_read_percpu(xen_vcpu); + vcpu = percpu_read(xen_vcpu); vcpu->evtchn_upcall_mask = 0; /* Doesn't matter if we get preempted here, because any diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c index 503c240e26c..98cb9869eb2 100644 --- a/arch/x86/xen/mmu.c +++ b/arch/x86/xen/mmu.c @@ -1063,18 +1063,14 @@ static void drop_other_mm_ref(void *info) struct mm_struct *mm = info; struct mm_struct *active_mm; -#ifdef CONFIG_X86_64 - active_mm = read_pda(active_mm); -#else - active_mm = __get_cpu_var(cpu_tlbstate).active_mm; -#endif + active_mm = percpu_read(cpu_tlbstate.active_mm); if (active_mm == mm) leave_mm(smp_processor_id()); /* If this cpu still has a stale cr3 reference, then make sure it has been flushed. */ - if (x86_read_percpu(xen_current_cr3) == __pa(mm->pgd)) { + if (percpu_read(xen_current_cr3) == __pa(mm->pgd)) { load_cr3(swapper_pg_dir); arch_flush_lazy_cpu_mode(); } diff --git a/arch/x86/xen/multicalls.h b/arch/x86/xen/multicalls.h index 85893824161..e786fa7f261 100644 --- a/arch/x86/xen/multicalls.h +++ b/arch/x86/xen/multicalls.h @@ -39,7 +39,7 @@ static inline void xen_mc_issue(unsigned mode) xen_mc_flush(); /* restore flags saved in xen_mc_batch */ - local_irq_restore(x86_read_percpu(xen_mc_irq_flags)); + local_irq_restore(percpu_read(xen_mc_irq_flags)); } /* Set up a callback to be called when the current batch is flushed */ diff --git a/arch/x86/xen/smp.c b/arch/x86/xen/smp.c index c44e2069c7c..7735e3dd359 100644 --- a/arch/x86/xen/smp.c +++ b/arch/x86/xen/smp.c @@ -50,11 +50,7 @@ static irqreturn_t xen_call_function_single_interrupt(int irq, void *dev_id); */ static irqreturn_t xen_reschedule_interrupt(int irq, void *dev_id) { -#ifdef CONFIG_X86_32 - __get_cpu_var(irq_stat).irq_resched_count++; -#else - add_pda(irq_resched_count, 1); -#endif + inc_irq_stat(irq_resched_count); return IRQ_HANDLED; } @@ -78,7 +74,7 @@ static __cpuinit void cpu_bringup(void) xen_setup_cpu_clockevents(); cpu_set(cpu, cpu_online_map); - x86_write_percpu(cpu_state, CPU_ONLINE); + percpu_write(cpu_state, CPU_ONLINE); wmb(); /* We can take interrupts now: we're officially "up". */ @@ -283,22 +279,10 @@ static int __cpuinit xen_cpu_up(unsigned int cpu) struct task_struct *idle = idle_task(cpu); int rc; -#ifdef CONFIG_X86_64 - /* Allocate node local memory for AP pdas */ - WARN_ON(cpu == 0); - if (cpu > 0) { - rc = get_local_pda(cpu); - if (rc) - return rc; - } -#endif - -#ifdef CONFIG_X86_32 - init_gdt(cpu); per_cpu(current_task, cpu) = idle; +#ifdef CONFIG_X86_32 irq_ctx_init(cpu); #else - cpu_pda(cpu)->pcurrent = idle; clear_tsk_thread_flag(idle, TIF_FORK); #endif xen_setup_timer(cpu); @@ -445,11 +429,7 @@ static irqreturn_t xen_call_function_interrupt(int irq, void *dev_id) { irq_enter(); generic_smp_call_function_interrupt(); -#ifdef CONFIG_X86_32 - __get_cpu_var(irq_stat).irq_call_count++; -#else - add_pda(irq_call_count, 1); -#endif + inc_irq_stat(irq_call_count); irq_exit(); return IRQ_HANDLED; @@ -459,11 +439,7 @@ static irqreturn_t xen_call_function_single_interrupt(int irq, void *dev_id) { irq_enter(); generic_smp_call_function_single_interrupt(); -#ifdef CONFIG_X86_32 - __get_cpu_var(irq_stat).irq_call_count++; -#else - add_pda(irq_call_count, 1); -#endif + inc_irq_stat(irq_call_count); irq_exit(); return IRQ_HANDLED; diff --git a/arch/x86/xen/suspend.c b/arch/x86/xen/suspend.c index 212ffe012b7..95be7b43472 100644 --- a/arch/x86/xen/suspend.c +++ b/arch/x86/xen/suspend.c @@ -6,6 +6,7 @@ #include <asm/xen/hypercall.h> #include <asm/xen/page.h> +#include <asm/fixmap.h> #include "xen-ops.h" #include "mmu.h" diff --git a/arch/x86/xen/xen-asm_64.S b/arch/x86/xen/xen-asm_64.S index 05794c566e8..d6fc51f4ce8 100644 --- a/arch/x86/xen/xen-asm_64.S +++ b/arch/x86/xen/xen-asm_64.S @@ -17,6 +17,7 @@ #include <asm/processor-flags.h> #include <asm/errno.h> #include <asm/segment.h> +#include <asm/percpu.h> #include <xen/interface/xen.h> @@ -28,12 +29,10 @@ #if 1 /* - x86-64 does not yet support direct access to percpu variables - via a segment override, so we just need to make sure this code - never gets used + FIXME: x86_64 now can support direct access to percpu variables + via a segment override. Update xen accordingly. */ #define BUG ud2a -#define PER_CPU_VAR(var, off) 0xdeadbeef #endif /* @@ -45,14 +44,14 @@ ENTRY(xen_irq_enable_direct) BUG /* Unmask events */ - movb $0, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask) + movb $0, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask /* Preempt here doesn't matter because that will deal with any pending interrupts. The pending check may end up being run on the wrong CPU, but that doesn't hurt. */ /* Test for pending */ - testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_pending) + testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending jz 1f 2: call check_events @@ -69,7 +68,7 @@ ENDPATCH(xen_irq_enable_direct) ENTRY(xen_irq_disable_direct) BUG - movb $1, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask) + movb $1, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask ENDPATCH(xen_irq_disable_direct) ret ENDPROC(xen_irq_disable_direct) @@ -87,7 +86,7 @@ ENDPATCH(xen_irq_disable_direct) ENTRY(xen_save_fl_direct) BUG - testb $0xff, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask) + testb $0xff, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask setz %ah addb %ah,%ah ENDPATCH(xen_save_fl_direct) @@ -107,13 +106,13 @@ ENTRY(xen_restore_fl_direct) BUG testb $X86_EFLAGS_IF>>8, %ah - setz PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_mask) + setz PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_mask /* Preempt here doesn't matter because that will deal with any pending interrupts. The pending check may end up being run on the wrong CPU, but that doesn't hurt. */ /* check for unmasked and pending */ - cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info, XEN_vcpu_info_pending) + cmpw $0x0001, PER_CPU_VAR(xen_vcpu_info) + XEN_vcpu_info_pending jz 1f 2: call check_events 1: @@ -195,11 +194,11 @@ RELOC(xen_sysexit, 1b+1) ENTRY(xen_sysret64) /* We're already on the usermode stack at this point, but still with the kernel gs, so we can easily switch back */ - movq %rsp, %gs:pda_oldrsp - movq %gs:pda_kernelstack,%rsp + movq %rsp, PER_CPU_VAR(old_rsp) + movq PER_CPU_VAR(kernel_stack),%rsp pushq $__USER_DS - pushq %gs:pda_oldrsp + pushq PER_CPU_VAR(old_rsp) pushq %r11 pushq $__USER_CS pushq %rcx @@ -212,11 +211,11 @@ RELOC(xen_sysret64, 1b+1) ENTRY(xen_sysret32) /* We're already on the usermode stack at this point, but still with the kernel gs, so we can easily switch back */ - movq %rsp, %gs:pda_oldrsp - movq %gs:pda_kernelstack, %rsp + movq %rsp, PER_CPU_VAR(old_rsp) + movq PER_CPU_VAR(kernel_stack), %rsp pushq $__USER32_DS - pushq %gs:pda_oldrsp + pushq PER_CPU_VAR(old_rsp) pushq %r11 pushq $__USER32_CS pushq %rcx diff --git a/crypto/authenc.c b/crypto/authenc.c index 40b6e9ec9e3..5793b64c81a 100644 --- a/crypto/authenc.c +++ b/crypto/authenc.c @@ -158,16 +158,19 @@ static int crypto_authenc_genicv(struct aead_request *req, u8 *iv, dstp = sg_page(dst); vdst = PageHighMem(dstp) ? NULL : page_address(dstp) + dst->offset; - sg_init_table(cipher, 2); - sg_set_buf(cipher, iv, ivsize); - authenc_chain(cipher, dst, vdst == iv + ivsize); + if (ivsize) { + sg_init_table(cipher, 2); + sg_set_buf(cipher, iv, ivsize); + authenc_chain(cipher, dst, vdst == iv + ivsize); + dst = cipher; + } cryptlen = req->cryptlen + ivsize; - hash = crypto_authenc_hash(req, flags, cipher, cryptlen); + hash = crypto_authenc_hash(req, flags, dst, cryptlen); if (IS_ERR(hash)) return PTR_ERR(hash); - scatterwalk_map_and_copy(hash, cipher, cryptlen, + scatterwalk_map_and_copy(hash, dst, cryptlen, crypto_aead_authsize(authenc), 1); return 0; } @@ -285,11 +288,14 @@ static int crypto_authenc_iverify(struct aead_request *req, u8 *iv, srcp = sg_page(src); vsrc = PageHighMem(srcp) ? NULL : page_address(srcp) + src->offset; - sg_init_table(cipher, 2); - sg_set_buf(cipher, iv, ivsize); - authenc_chain(cipher, src, vsrc == iv + ivsize); + if (ivsize) { + sg_init_table(cipher, 2); + sg_set_buf(cipher, iv, ivsize); + authenc_chain(cipher, src, vsrc == iv + ivsize); + src = cipher; + } - return crypto_authenc_verify(req, cipher, cryptlen + ivsize); + return crypto_authenc_verify(req, src, cryptlen + ivsize); } static int crypto_authenc_decrypt(struct aead_request *req) diff --git a/crypto/blkcipher.c b/crypto/blkcipher.c index 4a7e65c4df4..d70a41c002d 100644 --- a/crypto/blkcipher.c +++ b/crypto/blkcipher.c @@ -124,6 +124,7 @@ int blkcipher_walk_done(struct blkcipher_desc *desc, scatterwalk_done(&walk->in, 0, nbytes); scatterwalk_done(&walk->out, 1, nbytes); +err: walk->total = nbytes; walk->nbytes = nbytes; @@ -132,7 +133,6 @@ int blkcipher_walk_done(struct blkcipher_desc *desc, return blkcipher_walk_next(desc, walk); } -err: if (walk->iv != desc->info) memcpy(desc->info, walk->iv, crypto_blkcipher_ivsize(tfm)); if (walk->buffer != walk->page) diff --git a/crypto/ccm.c b/crypto/ccm.c index 7cf7e5a6b78..c36d654cf56 100644 --- a/crypto/ccm.c +++ b/crypto/ccm.c @@ -266,6 +266,8 @@ static int crypto_ccm_auth(struct aead_request *req, struct scatterlist *plain, if (assoclen) { pctx->ilen = format_adata(idata, assoclen); get_data_to_compute(cipher, pctx, req->assoc, req->assoclen); + } else { + pctx->ilen = 0; } /* compute plaintext into mac */ diff --git a/drivers/ata/Kconfig b/drivers/ata/Kconfig index 503a908afc8..0bcf2646467 100644 --- a/drivers/ata/Kconfig +++ b/drivers/ata/Kconfig @@ -112,11 +112,11 @@ config ATA_PIIX If unsure, say N. config SATA_MV - tristate "Marvell SATA support (HIGHLY EXPERIMENTAL)" - depends on EXPERIMENTAL + tristate "Marvell SATA support" help This option enables support for the Marvell Serial ATA family. - Currently supports 88SX[56]0[48][01] chips. + Currently supports 88SX[56]0[48][01] PCI(-X) chips, + as well as the newer [67]042 PCI-X/PCIe and SOC devices. If unsure, say N. diff --git a/drivers/ata/ahci.c b/drivers/ata/ahci.c index 96039671e3b..77bba4c083c 100644 --- a/drivers/ata/ahci.c +++ b/drivers/ata/ahci.c @@ -2548,6 +2548,32 @@ static void ahci_p5wdh_workaround(struct ata_host *host) } } +static bool ahci_broken_system_poweroff(struct pci_dev *pdev) +{ + static const struct dmi_system_id broken_systems[] = { + { + .ident = "HP Compaq nx6310", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6310"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, + + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(broken_systems); + + if (dmi) { + unsigned long slot = (unsigned long)dmi->driver_data; + /* apply the quirk only to on-board controllers */ + return slot == PCI_SLOT(pdev->devfn); + } + + return false; +} + static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; @@ -2647,6 +2673,12 @@ static int ahci_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) } } + if (ahci_broken_system_poweroff(pdev)) { + pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN; + dev_info(&pdev->dev, + "quirky BIOS, skipping spindown on poweroff\n"); + } + /* CAP.NP sometimes indicate the index of the last enabled * port, at other times, that of the last possible port, so * determining the maximum port number requires looking at diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c index 887d8f46a28..54961c0b2c7 100644 --- a/drivers/ata/ata_piix.c +++ b/drivers/ata/ata_piix.c @@ -1387,6 +1387,32 @@ static void piix_iocfg_bit18_quirk(struct ata_host *host) } } +static bool piix_broken_system_poweroff(struct pci_dev *pdev) +{ + static const struct dmi_system_id broken_systems[] = { + { + .ident = "HP Compaq 2510p", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq 2510p"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x1FUL, + }, + + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(broken_systems); + + if (dmi) { + unsigned long slot = (unsigned long)dmi->driver_data; + /* apply the quirk only to on-board controllers */ + return slot == PCI_SLOT(pdev->devfn); + } + + return false; +} + /** * piix_init_one - Register PIIX ATA PCI device with kernel services * @pdev: PCI device to register @@ -1422,6 +1448,14 @@ static int __devinit piix_init_one(struct pci_dev *pdev, if (!in_module_init) return -ENODEV; + if (piix_broken_system_poweroff(pdev)) { + piix_port_info[ent->driver_data].flags |= + ATA_FLAG_NO_POWEROFF_SPINDOWN | + ATA_FLAG_NO_HIBERNATE_SPINDOWN; + dev_info(&pdev->dev, "quirky BIOS, skipping spindown " + "on poweroff and hibernation\n"); + } + port_info[0] = piix_port_info[ent->driver_data]; port_info[1] = piix_port_info[ent->driver_data]; diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c index a1a6e6298c3..3c4c5ae277b 100644 --- a/drivers/ata/libata-scsi.c +++ b/drivers/ata/libata-scsi.c @@ -46,6 +46,7 @@ #include <linux/libata.h> #include <linux/hdreg.h> #include <linux/uaccess.h> +#include <linux/suspend.h> #include "libata.h" @@ -1303,6 +1304,17 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) tf->command = ATA_CMD_VERIFY; /* READ VERIFY */ } else { + /* Some odd clown BIOSen issue spindown on power off (ACPI S4 + * or S5) causing some drives to spin up and down again. + */ + if ((qc->ap->flags & ATA_FLAG_NO_POWEROFF_SPINDOWN) && + system_state == SYSTEM_POWER_OFF) + goto skip; + + if ((qc->ap->flags & ATA_FLAG_NO_HIBERNATE_SPINDOWN) && + system_entering_hibernation()) + goto skip; + /* XXX: This is for backward compatibility, will be * removed. Read Documentation/feature-removal-schedule.txt * for more info. @@ -1326,8 +1338,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) scmd->scsi_done = qc->scsidone; qc->scsidone = ata_delayed_done; } - scmd->result = SAM_STAT_GOOD; - return 1; + goto skip; } /* Issue ATA STANDBY IMMEDIATE command */ @@ -1343,10 +1354,13 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc) return 0; -invalid_fld: + invalid_fld: ata_scsi_set_sense(scmd, ILLEGAL_REQUEST, 0x24, 0x0); /* "Invalid field in cbd" */ return 1; + skip: + scmd->result = SAM_STAT_GOOD; + return 1; } diff --git a/drivers/ata/libata-sff.c b/drivers/ata/libata-sff.c index 5a4aad123c4..0b299b0f817 100644 --- a/drivers/ata/libata-sff.c +++ b/drivers/ata/libata-sff.c @@ -1322,7 +1322,7 @@ fsm_start: * condition. Mark hint. */ ata_ehi_push_desc(ehi, "ST-ATA: " - "DRQ=1 with device error, " + "DRQ=0 without device error, " "dev_stat 0x%X", status); qc->err_mask |= AC_ERR_HSM | AC_ERR_NODEV_HINT; @@ -1358,6 +1358,16 @@ fsm_start: qc->err_mask |= AC_ERR_HSM; } + /* There are oddball controllers with + * status register stuck at 0x7f and + * lbal/m/h at zero which makes it + * pass all other presence detection + * mechanisms we have. Set NODEV_HINT + * for it. Kernel bz#7241. + */ + if (status == 0x7f) + qc->err_mask |= AC_ERR_NODEV_HINT; + /* ata_pio_sectors() might change the * state to HSM_ST_LAST. so, the state * is changed after ata_pio_sectors(). diff --git a/drivers/ata/pata_rb532_cf.c b/drivers/ata/pata_rb532_cf.c index c2e6fb9f2ef..ebfcda26d63 100644 --- a/drivers/ata/pata_rb532_cf.c +++ b/drivers/ata/pata_rb532_cf.c @@ -63,8 +63,6 @@ static inline void rb532_pata_finish_io(struct ata_port *ap) ata_sff_sync might be sufficient. */ ata_sff_dma_pause(ap); ndelay(RB500_CF_IO_DELAY); - - set_irq_type(info->irq, IRQ_TYPE_LEVEL_HIGH); } static void rb532_pata_exec_command(struct ata_port *ap, diff --git a/drivers/ata/pata_via.c b/drivers/ata/pata_via.c index 681169c9c64..79a6c9a0b72 100644 --- a/drivers/ata/pata_via.c +++ b/drivers/ata/pata_via.c @@ -86,6 +86,10 @@ enum { VIA_SATA_PATA = 0x800, /* SATA/PATA combined configuration */ }; +enum { + VIA_IDFLAG_SINGLE = (1 << 0), /* single channel controller) */ +}; + /* * VIA SouthBridge chips. */ @@ -97,8 +101,12 @@ static const struct via_isa_bridge { u8 rev_max; u16 flags; } via_isa_bridges[] = { + { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, + VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, { "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, + { "vt8261", PCI_DEVICE_ID_VIA_8261, 0x00, 0x2f, + VIA_UDMA_133 | VIA_BAD_AST }, { "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "vt8251", PCI_DEVICE_ID_VIA_8251, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST }, { "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, VIA_UDMA_133 | VIA_BAD_AST | VIA_SATA_PATA }, @@ -122,6 +130,8 @@ static const struct via_isa_bridge { { "vt82c586", PCI_DEVICE_ID_VIA_82C586_0, 0x00, 0x0f, VIA_UDMA_NONE | VIA_SET_FIFO }, { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK }, { "vt82c576", PCI_DEVICE_ID_VIA_82C576, 0x00, 0x2f, VIA_UDMA_NONE | VIA_SET_FIFO | VIA_NO_UNMASK | VIA_BAD_ID }, + { "vtxxxx", PCI_DEVICE_ID_VIA_ANON, 0x00, 0x2f, + VIA_UDMA_133 | VIA_BAD_AST }, { NULL } }; @@ -460,6 +470,7 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) static int printed_version; u8 enable; u32 timing; + unsigned long flags = id->driver_data; int rc; if (!printed_version++) @@ -469,9 +480,13 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) if (rc) return rc; + if (flags & VIA_IDFLAG_SINGLE) + ppi[1] = &ata_dummy_port_info; + /* To find out how the IDE will behave and what features we actually have to look at the bridge not the IDE controller */ - for (config = via_isa_bridges; config->id; config++) + for (config = via_isa_bridges; config->id != PCI_DEVICE_ID_VIA_ANON; + config++) if ((isa = pci_get_device(PCI_VENDOR_ID_VIA + !!(config->flags & VIA_BAD_ID), config->id, NULL))) { @@ -482,10 +497,6 @@ static int via_init_one(struct pci_dev *pdev, const struct pci_device_id *id) pci_dev_put(isa); } - if (!config->id) { - printk(KERN_WARNING "via: Unknown VIA SouthBridge, disabling.\n"); - return -ENODEV; - } pci_dev_put(isa); if (!(config->flags & VIA_NO_ENABLES)) { @@ -587,6 +598,7 @@ static const struct pci_device_id via[] = { { PCI_VDEVICE(VIA, 0x1571), }, { PCI_VDEVICE(VIA, 0x3164), }, { PCI_VDEVICE(VIA, 0x5324), }, + { PCI_VDEVICE(VIA, 0xC409), VIA_IDFLAG_SINGLE }, { }, }; diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c index 86918634a4c..f2d8a020ea5 100644 --- a/drivers/ata/sata_mv.c +++ b/drivers/ata/sata_mv.c @@ -33,10 +33,6 @@ * * --> ATAPI support (Marvell claims the 60xx/70xx chips can do it). * - * --> Investigate problems with PCI Message Signalled Interrupts (MSI). - * - * --> Cache frequently-accessed registers in mv_port_priv to reduce overhead. - * * --> Develop a low-power-consumption strategy, and implement it. * * --> [Experiment, low priority] Investigate interrupt coalescing. @@ -72,7 +68,7 @@ #include <linux/libata.h> #define DRV_NAME "sata_mv" -#define DRV_VERSION "1.24" +#define DRV_VERSION "1.25" enum { /* BAR's are enumerated in terms of pci_resource_start() terms */ @@ -351,8 +347,6 @@ enum { EDMA_HALTCOND_OFS = 0x60, /* GenIIe halt conditions */ - GEN_II_NCQ_MAX_SECTORS = 256, /* max sects/io on Gen2 w/NCQ */ - /* Host private flags (hp_flags) */ MV_HP_FLAG_MSI = (1 << 0), MV_HP_ERRATA_50XXB0 = (1 << 1), @@ -883,19 +877,15 @@ static void mv_start_dma(struct ata_port *ap, void __iomem *port_mmio, struct mv_host_priv *hpriv = ap->host->private_data; int hardport = mv_hardport_from_port(ap->port_no); void __iomem *hc_mmio = mv_hc_base_from_port( - mv_host_base(ap->host), hardport); - u32 hc_irq_cause, ipending; + mv_host_base(ap->host), ap->port_no); + u32 hc_irq_cause; /* clear EDMA event indicators, if any */ writelfl(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); - /* clear EDMA interrupt indicator, if any */ - hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); - ipending = (DEV_IRQ | DMA_IRQ) << hardport; - if (hc_irq_cause & ipending) { - writelfl(hc_irq_cause & ~ipending, - hc_mmio + HC_IRQ_CAUSE_OFS); - } + /* clear pending irq events */ + hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); + writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); mv_edma_cfg(ap, want_ncq); @@ -1099,20 +1089,12 @@ static void mv6_dev_config(struct ata_device *adev) * * Gen-II does not support NCQ over a port multiplier * (no FIS-based switching). - * - * We don't have hob_nsect when doing NCQ commands on Gen-II. - * See mv_qc_prep() for more info. */ if (adev->flags & ATA_DFLAG_NCQ) { if (sata_pmp_attached(adev->link->ap)) { adev->flags &= ~ATA_DFLAG_NCQ; ata_dev_printk(adev, KERN_INFO, "NCQ disabled for command-based switching\n"); - } else if (adev->max_sectors > GEN_II_NCQ_MAX_SECTORS) { - adev->max_sectors = GEN_II_NCQ_MAX_SECTORS; - ata_dev_printk(adev, KERN_INFO, - "max_sectors limited to %u for NCQ\n", - adev->max_sectors); } } } @@ -1450,7 +1432,8 @@ static void mv_qc_prep(struct ata_queued_cmd *qc) * only 11 bytes...so we must pick and choose required * registers based on the command. So, we drop feature and * hob_feature for [RW] DMA commands, but they are needed for - * NCQ. NCQ will drop hob_nsect. + * NCQ. NCQ will drop hob_nsect, which is not needed there + * (nsect is used only for the tag; feat/hob_feat hold true nsect). */ switch (tf->command) { case ATA_CMD_READ: @@ -2214,9 +2197,15 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) struct ata_host *host = dev_instance; struct mv_host_priv *hpriv = host->private_data; unsigned int handled = 0; + int using_msi = hpriv->hp_flags & MV_HP_FLAG_MSI; u32 main_irq_cause, pending_irqs; spin_lock(&host->lock); + + /* for MSI: block new interrupts while in here */ + if (using_msi) + writel(0, hpriv->main_irq_mask_addr); + main_irq_cause = readl(hpriv->main_irq_cause_addr); pending_irqs = main_irq_cause & hpriv->main_irq_mask; /* @@ -2230,6 +2219,11 @@ static irqreturn_t mv_interrupt(int irq, void *dev_instance) handled = mv_host_intr(host, pending_irqs); } spin_unlock(&host->lock); + + /* for MSI: unmask; interrupt cause bits will retrigger now */ + if (using_msi) + writel(hpriv->main_irq_mask, hpriv->main_irq_mask_addr); + return IRQ_RETVAL(handled); } @@ -2821,8 +2815,7 @@ static void mv_eh_thaw(struct ata_port *ap) writel(0, port_mmio + EDMA_ERR_IRQ_CAUSE_OFS); /* clear pending irq events */ - hc_irq_cause = readl(hc_mmio + HC_IRQ_CAUSE_OFS); - hc_irq_cause &= ~((DEV_IRQ | DMA_IRQ) << hardport); + hc_irq_cause = ~((DEV_IRQ | DMA_IRQ) << hardport); writelfl(hc_irq_cause, hc_mmio + HC_IRQ_CAUSE_OFS); mv_enable_port_irqs(ap, ERR_IRQ); @@ -3075,6 +3068,9 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx) hpriv->main_irq_mask_addr = mmio + PCI_HC_MAIN_IRQ_MASK_OFS; } + /* initialize shadow irq mask with register's value */ + hpriv->main_irq_mask = readl(hpriv->main_irq_mask_addr); + /* global interrupt mask: 0 == mask everything */ mv_set_main_irq_mask(host, ~0, 0); @@ -3430,9 +3426,9 @@ static int mv_pci_init_one(struct pci_dev *pdev, if (rc) return rc; - /* Enable interrupts */ - if (msi && pci_enable_msi(pdev)) - pci_intx(pdev, 1); + /* Enable message-switched interrupts, if requested */ + if (msi && pci_enable_msi(pdev) == 0) + hpriv->hp_flags |= MV_HP_FLAG_MSI; mv_dump_pci_cfg(pdev, 0x68); mv_print_info(host); diff --git a/drivers/ata/sata_nv.c b/drivers/ata/sata_nv.c index 6f146061432..c49ad0e61b6 100644 --- a/drivers/ata/sata_nv.c +++ b/drivers/ata/sata_nv.c @@ -305,10 +305,10 @@ static irqreturn_t nv_ck804_interrupt(int irq, void *dev_instance); static int nv_scr_read(struct ata_link *link, unsigned int sc_reg, u32 *val); static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val); +static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline); static void nv_nf2_freeze(struct ata_port *ap); static void nv_nf2_thaw(struct ata_port *ap); -static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline); static void nv_ck804_freeze(struct ata_port *ap); static void nv_ck804_thaw(struct ata_port *ap); static int nv_adma_slave_config(struct scsi_device *sdev); @@ -352,6 +352,7 @@ enum nv_host_type NFORCE3 = NFORCE2, /* NF2 == NF3 as far as sata_nv is concerned */ CK804, ADMA, + MCP5x, SWNCQ, }; @@ -363,10 +364,10 @@ static const struct pci_device_id nv_pci_tbl[] = { { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2), CK804 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA), CK804 }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2), CK804 }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), SWNCQ }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), SWNCQ }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), SWNCQ }, - { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), SWNCQ }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA), MCP5x }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2), MCP5x }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA), MCP5x }, + { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP55_SATA2), MCP5x }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA), GENERIC }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA2), GENERIC }, { PCI_VDEVICE(NVIDIA, PCI_DEVICE_ID_NVIDIA_NFORCE_MCP61_SATA3), GENERIC }, @@ -432,7 +433,7 @@ static struct ata_port_operations nv_nf2_ops = { .inherits = &nv_common_ops, .freeze = nv_nf2_freeze, .thaw = nv_nf2_thaw, - .hardreset = nv_nf2_hardreset, + .hardreset = nv_noclassify_hardreset, }; /* CK804 finally gets hardreset right */ @@ -467,8 +468,19 @@ static struct ata_port_operations nv_adma_ops = { .host_stop = nv_adma_host_stop, }; +/* Kernel bz#12351 reports that when SWNCQ is enabled, for hotplug to + * work, hardreset should be used and hardreset can't report proper + * signature, which suggests that mcp5x is closer to nf2 as long as + * reset quirkiness is concerned. Define separate ops for mcp5x with + * nv_noclassify_hardreset(). + */ +static struct ata_port_operations nv_mcp5x_ops = { + .inherits = &nv_common_ops, + .hardreset = nv_noclassify_hardreset, +}; + static struct ata_port_operations nv_swncq_ops = { - .inherits = &nv_generic_ops, + .inherits = &nv_mcp5x_ops, .qc_defer = ata_std_qc_defer, .qc_prep = nv_swncq_qc_prep, @@ -531,6 +543,15 @@ static const struct ata_port_info nv_port_info[] = { .port_ops = &nv_adma_ops, .private_data = NV_PI_PRIV(nv_adma_interrupt, &nv_adma_sht), }, + /* MCP5x */ + { + .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY, + .pio_mask = NV_PIO_MASK, + .mwdma_mask = NV_MWDMA_MASK, + .udma_mask = NV_UDMA_MASK, + .port_ops = &nv_mcp5x_ops, + .private_data = NV_PI_PRIV(nv_generic_interrupt, &nv_sht), + }, /* SWNCQ */ { .flags = ATA_FLAG_SATA | ATA_FLAG_NO_LEGACY | @@ -1530,6 +1551,17 @@ static int nv_scr_write(struct ata_link *link, unsigned int sc_reg, u32 val) return 0; } +static int nv_noclassify_hardreset(struct ata_link *link, unsigned int *class, + unsigned long deadline) +{ + bool online; + int rc; + + rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, + &online, NULL); + return online ? -EAGAIN : rc; +} + static void nv_nf2_freeze(struct ata_port *ap) { void __iomem *scr_addr = ap->host->ports[0]->ioaddr.scr_addr; @@ -1554,17 +1586,6 @@ static void nv_nf2_thaw(struct ata_port *ap) iowrite8(mask, scr_addr + NV_INT_ENABLE); } -static int nv_nf2_hardreset(struct ata_link *link, unsigned int *class, - unsigned long deadline) -{ - bool online; - int rc; - - rc = sata_link_hardreset(link, sata_deb_timing_hotplug, deadline, - &online, NULL); - return online ? -EAGAIN : rc; -} - static void nv_ck804_freeze(struct ata_port *ap) { void __iomem *mmio_base = ap->host->iomap[NV_MMIO_BAR]; @@ -2355,14 +2376,9 @@ static int nv_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (type == CK804 && adma_enabled) { dev_printk(KERN_NOTICE, &pdev->dev, "Using ADMA mode\n"); type = ADMA; - } - - if (type == SWNCQ) { - if (swncq_enabled) - dev_printk(KERN_NOTICE, &pdev->dev, - "Using SWNCQ mode\n"); - else - type = GENERIC; + } else if (type == MCP5x && swncq_enabled) { + dev_printk(KERN_NOTICE, &pdev->dev, "Using SWNCQ mode\n"); + type = SWNCQ; } ppi[0] = &nv_port_info[type]; diff --git a/drivers/ata/sata_sil.c b/drivers/ata/sata_sil.c index 564c142b03b..bfd55b085ae 100644 --- a/drivers/ata/sata_sil.c +++ b/drivers/ata/sata_sil.c @@ -695,11 +695,38 @@ static void sil_init_controller(struct ata_host *host) } } +static bool sil_broken_system_poweroff(struct pci_dev *pdev) +{ + static const struct dmi_system_id broken_systems[] = { + { + .ident = "HP Compaq nx6325", + .matches = { + DMI_MATCH(DMI_SYS_VENDOR, "Hewlett-Packard"), + DMI_MATCH(DMI_PRODUCT_NAME, "HP Compaq nx6325"), + }, + /* PCI slot number of the controller */ + .driver_data = (void *)0x12UL, + }, + + { } /* terminate list */ + }; + const struct dmi_system_id *dmi = dmi_first_match(broken_systems); + + if (dmi) { + unsigned long slot = (unsigned long)dmi->driver_data; + /* apply the quirk only to on-board controllers */ + return slot == PCI_SLOT(pdev->devfn); + } + + return false; +} + static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) { static int printed_version; int board_id = ent->driver_data; - const struct ata_port_info *ppi[] = { &sil_port_info[board_id], NULL }; + struct ata_port_info pi = sil_port_info[board_id]; + const struct ata_port_info *ppi[] = { &pi, NULL }; struct ata_host *host; void __iomem *mmio_base; int n_ports, rc; @@ -713,6 +740,13 @@ static int sil_init_one(struct pci_dev *pdev, const struct pci_device_id *ent) if (board_id == sil_3114) n_ports = 4; + if (sil_broken_system_poweroff(pdev)) { + pi.flags |= ATA_FLAG_NO_POWEROFF_SPINDOWN | + ATA_FLAG_NO_HIBERNATE_SPINDOWN; + dev_info(&pdev->dev, "quirky BIOS, skipping spindown " + "on poweroff and hibernation\n"); + } + host = ata_host_alloc_pinfo(&pdev->dev, ppi, n_ports); if (!host) return -ENOMEM; diff --git a/drivers/base/core.c b/drivers/base/core.c index 8079afca497..55e530942ab 100644 --- a/drivers/base/core.c +++ b/drivers/base/core.c @@ -777,10 +777,16 @@ static void device_remove_class_symlinks(struct device *dev) int dev_set_name(struct device *dev, const char *fmt, ...) { va_list vargs; + char *s; va_start(vargs, fmt); vsnprintf(dev->bus_id, sizeof(dev->bus_id), fmt, vargs); va_end(vargs); + + /* ewww... some of these buggers have / in the name... */ + while ((s = strchr(dev->bus_id, '/'))) + *s = '!'; + return 0; } EXPORT_SYMBOL_GPL(dev_set_name); diff --git a/drivers/base/cpu.c b/drivers/base/cpu.c index 719ee5c1c8d..5b257a57bc5 100644 --- a/drivers/base/cpu.c +++ b/drivers/base/cpu.c @@ -107,7 +107,7 @@ static SYSDEV_ATTR(crash_notes, 0400, show_crash_notes, NULL); /* * Print cpu online, possible, present, and system maps */ -static ssize_t print_cpus_map(char *buf, cpumask_t *map) +static ssize_t print_cpus_map(char *buf, const struct cpumask *map) { int n = cpulist_scnprintf(buf, PAGE_SIZE-2, map); diff --git a/drivers/base/topology.c b/drivers/base/topology.c index a778fb52b11..bf6b13206d0 100644 --- a/drivers/base/topology.c +++ b/drivers/base/topology.c @@ -31,7 +31,10 @@ #include <linux/hardirq.h> #include <linux/topology.h> -#define define_one_ro(_name) \ +#define define_one_ro_named(_name, _func) \ +static SYSDEV_ATTR(_name, 0444, _func, NULL) + +#define define_one_ro(_name) \ static SYSDEV_ATTR(_name, 0444, show_##_name, NULL) #define define_id_show_func(name) \ @@ -42,8 +45,8 @@ static ssize_t show_##name(struct sys_device *dev, \ return sprintf(buf, "%d\n", topology_##name(cpu)); \ } -#if defined(topology_thread_siblings) || defined(topology_core_siblings) -static ssize_t show_cpumap(int type, cpumask_t *mask, char *buf) +#if defined(topology_thread_cpumask) || defined(topology_core_cpumask) +static ssize_t show_cpumap(int type, const struct cpumask *mask, char *buf) { ptrdiff_t len = PTR_ALIGN(buf + PAGE_SIZE - 1, PAGE_SIZE) - buf; int n = 0; @@ -65,7 +68,7 @@ static ssize_t show_##name(struct sys_device *dev, \ struct sysdev_attribute *attr, char *buf) \ { \ unsigned int cpu = dev->id; \ - return show_cpumap(0, &(topology_##name(cpu)), buf); \ + return show_cpumap(0, topology_##name(cpu), buf); \ } #define define_siblings_show_list(name) \ @@ -74,7 +77,7 @@ static ssize_t show_##name##_list(struct sys_device *dev, \ char *buf) \ { \ unsigned int cpu = dev->id; \ - return show_cpumap(1, &(topology_##name(cpu)), buf); \ + return show_cpumap(1, topology_##name(cpu), buf); \ } #else @@ -82,9 +85,7 @@ static ssize_t show_##name##_list(struct sys_device *dev, \ static ssize_t show_##name(struct sys_device *dev, \ struct sysdev_attribute *attr, char *buf) \ { \ - unsigned int cpu = dev->id; \ - cpumask_t mask = topology_##name(cpu); \ - return show_cpumap(0, &mask, buf); \ + return show_cpumap(0, topology_##name(dev->id), buf); \ } #define define_siblings_show_list(name) \ @@ -92,9 +93,7 @@ static ssize_t show_##name##_list(struct sys_device *dev, \ struct sysdev_attribute *attr, \ char *buf) \ { \ - unsigned int cpu = dev->id; \ - cpumask_t mask = topology_##name(cpu); \ - return show_cpumap(1, &mask, buf); \ + return show_cpumap(1, topology_##name(dev->id), buf); \ } #endif @@ -107,13 +106,13 @@ define_one_ro(physical_package_id); define_id_show_func(core_id); define_one_ro(core_id); -define_siblings_show_func(thread_siblings); -define_one_ro(thread_siblings); -define_one_ro(thread_siblings_list); +define_siblings_show_func(thread_cpumask); +define_one_ro_named(thread_siblings, show_thread_cpumask); +define_one_ro_named(thread_siblings_list, show_thread_cpumask_list); -define_siblings_show_func(core_siblings); -define_one_ro(core_siblings); -define_one_ro(core_siblings_list); +define_siblings_show_func(core_cpumask); +define_one_ro_named(core_siblings, show_core_cpumask); +define_one_ro_named(core_siblings_list, show_core_cpumask_list); static struct attribute *default_attrs[] = { &attr_physical_package_id.attr, diff --git a/drivers/char/hw_random/omap-rng.c b/drivers/char/hw_random/omap-rng.c index d4e7dca06e4..ba68a4671cb 100644 --- a/drivers/char/hw_random/omap-rng.c +++ b/drivers/char/hw_random/omap-rng.c @@ -102,7 +102,7 @@ static int __init omap_rng_probe(struct platform_device *pdev) return -EBUSY; if (cpu_is_omap24xx()) { - rng_ick = clk_get(NULL, "rng_ick"); + rng_ick = clk_get(&pdev->dev, "rng_ick"); if (IS_ERR(rng_ick)) { dev_err(&pdev->dev, "Could not get rng_ick\n"); ret = PTR_ERR(rng_ick); diff --git a/drivers/char/tty_io.c b/drivers/char/tty_io.c index d33e5ab0617..bc84e125c6b 100644 --- a/drivers/char/tty_io.c +++ b/drivers/char/tty_io.c @@ -1817,8 +1817,10 @@ got_driver: /* check whether we're reopening an existing tty */ tty = tty_driver_lookup_tty(driver, inode, index); - if (IS_ERR(tty)) + if (IS_ERR(tty)) { + mutex_unlock(&tty_mutex); return PTR_ERR(tty); + } } if (tty) { diff --git a/drivers/dma/Kconfig b/drivers/dma/Kconfig index e34b0642081..48ea59e7967 100644 --- a/drivers/dma/Kconfig +++ b/drivers/dma/Kconfig @@ -62,6 +62,25 @@ config MV_XOR ---help--- Enable support for the Marvell XOR engine. +config MX3_IPU + bool "MX3x Image Processing Unit support" + depends on ARCH_MX3 + select DMA_ENGINE + default y + help + If you plan to use the Image Processing unit in the i.MX3x, say + Y here. If unsure, select Y. + +config MX3_IPU_IRQS + int "Number of dynamically mapped interrupts for IPU" + depends on MX3_IPU + range 2 137 + default 4 + help + Out of 137 interrupt sources on i.MX31 IPU only very few are used. + To avoid bloating the irq_desc[] array we allocate a sufficient + number of IRQ slots and map them dynamically to specific sources. + config DMA_ENGINE bool diff --git a/drivers/dma/Makefile b/drivers/dma/Makefile index 14f59527d4f..2e5dc96700d 100644 --- a/drivers/dma/Makefile +++ b/drivers/dma/Makefile @@ -7,3 +7,4 @@ obj-$(CONFIG_INTEL_IOP_ADMA) += iop-adma.o obj-$(CONFIG_FSL_DMA) += fsldma.o obj-$(CONFIG_MV_XOR) += mv_xor.o obj-$(CONFIG_DW_DMAC) += dw_dmac.o +obj-$(CONFIG_MX3_IPU) += ipu/ diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c index 403dbe78112..a58993011ed 100644 --- a/drivers/dma/dmaengine.c +++ b/drivers/dma/dmaengine.c @@ -329,9 +329,6 @@ struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type) struct dma_chan *chan; int cpu; - WARN_ONCE(dmaengine_ref_count == 0, - "client called %s without a reference", __func__); - cpu = get_cpu(); chan = per_cpu_ptr(channel_table[tx_type], cpu)->chan; put_cpu(); @@ -348,9 +345,6 @@ void dma_issue_pending_all(void) struct dma_device *device; struct dma_chan *chan; - WARN_ONCE(dmaengine_ref_count == 0, - "client called %s without a reference", __func__); - rcu_read_lock(); list_for_each_entry_rcu(device, &dma_device_list, global_node) { if (dma_has_cap(DMA_PRIVATE, device->cap_mask)) @@ -961,6 +955,8 @@ void dma_run_dependencies(struct dma_async_tx_descriptor *tx) if (!dep) return; + /* we'll submit tx->next now, so clear the link */ + tx->next = NULL; chan = dep->chan; /* keep submitting up until a channel switch is detected diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c index 3603f1ea5b2..732fa1ec36a 100644 --- a/drivers/dma/dmatest.c +++ b/drivers/dma/dmatest.c @@ -217,6 +217,10 @@ static int dmatest_func(void *data) chan = thread->chan; while (!kthread_should_stop()) { + struct dma_device *dev = chan->device; + struct dma_async_tx_descriptor *tx; + dma_addr_t dma_src, dma_dest; + total_tests++; len = dmatest_random() % test_buf_size + 1; @@ -226,10 +230,30 @@ static int dmatest_func(void *data) dmatest_init_srcbuf(thread->srcbuf, src_off, len); dmatest_init_dstbuf(thread->dstbuf, dst_off, len); - cookie = dma_async_memcpy_buf_to_buf(chan, - thread->dstbuf + dst_off, - thread->srcbuf + src_off, - len); + dma_src = dma_map_single(dev->dev, thread->srcbuf + src_off, + len, DMA_TO_DEVICE); + /* map with DMA_BIDIRECTIONAL to force writeback/invalidate */ + dma_dest = dma_map_single(dev->dev, thread->dstbuf, + test_buf_size, DMA_BIDIRECTIONAL); + + tx = dev->device_prep_dma_memcpy(chan, dma_dest + dst_off, + dma_src, len, + DMA_CTRL_ACK | DMA_COMPL_SKIP_DEST_UNMAP); + if (!tx) { + dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE); + dma_unmap_single(dev->dev, dma_dest, + test_buf_size, DMA_BIDIRECTIONAL); + pr_warning("%s: #%u: prep error with src_off=0x%x " + "dst_off=0x%x len=0x%x\n", + thread_name, total_tests - 1, + src_off, dst_off, len); + msleep(100); + failed_tests++; + continue; + } + tx->callback = NULL; + cookie = tx->tx_submit(tx); + if (dma_submit_error(cookie)) { pr_warning("%s: #%u: submit error %d with src_off=0x%x " "dst_off=0x%x len=0x%x\n", @@ -253,6 +277,9 @@ static int dmatest_func(void *data) failed_tests++; continue; } + /* Unmap by myself (see DMA_COMPL_SKIP_DEST_UNMAP above) */ + dma_unmap_single(dev->dev, dma_dest, + test_buf_size, DMA_BIDIRECTIONAL); error_count = 0; diff --git a/drivers/dma/fsldma.c b/drivers/dma/fsldma.c index ca70a21afc6..70126a60623 100644 --- a/drivers/dma/fsldma.c +++ b/drivers/dma/fsldma.c @@ -822,7 +822,7 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev, */ WARN_ON(fdev->feature != new_fsl_chan->feature); - new_fsl_chan->dev = &new_fsl_chan->common.dev->device; + new_fsl_chan->dev = fdev->dev; new_fsl_chan->reg_base = ioremap(new_fsl_chan->reg.start, new_fsl_chan->reg.end - new_fsl_chan->reg.start + 1); @@ -875,7 +875,8 @@ static int __devinit fsl_dma_chan_probe(struct fsl_dma_device *fdev, } dev_info(fdev->dev, "#%d (%s), irq %d\n", new_fsl_chan->id, - compatible, new_fsl_chan->irq); + compatible, + new_fsl_chan->irq != NO_IRQ ? new_fsl_chan->irq : fdev->irq); return 0; @@ -890,7 +891,8 @@ err_no_reg: static void fsl_dma_chan_remove(struct fsl_dma_chan *fchan) { - free_irq(fchan->irq, fchan); + if (fchan->irq != NO_IRQ) + free_irq(fchan->irq, fchan); list_del(&fchan->common.device_node); iounmap(fchan->reg_base); kfree(fchan); diff --git a/drivers/dma/ipu/Makefile b/drivers/dma/ipu/Makefile new file mode 100644 index 00000000000..6704cf48326 --- /dev/null +++ b/drivers/dma/ipu/Makefile @@ -0,0 +1 @@ +obj-y += ipu_irq.o ipu_idmac.o diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c new file mode 100644 index 00000000000..1f154d08e98 --- /dev/null +++ b/drivers/dma/ipu/ipu_idmac.c @@ -0,0 +1,1740 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/platform_device.h> +#include <linux/err.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/list.h> +#include <linux/clk.h> +#include <linux/vmalloc.h> +#include <linux/string.h> +#include <linux/interrupt.h> +#include <linux/io.h> + +#include <mach/ipu.h> + +#include "ipu_intern.h" + +#define FS_VF_IN_VALID 0x00000002 +#define FS_ENC_IN_VALID 0x00000001 + +/* + * There can be only one, we could allocate it dynamically, but then we'd have + * to add an extra parameter to some functions, and use something as ugly as + * struct ipu *ipu = to_ipu(to_idmac(ichan->dma_chan.device)); + * in the ISR + */ +static struct ipu ipu_data; + +#define to_ipu(id) container_of(id, struct ipu, idmac) + +static u32 __idmac_read_icreg(struct ipu *ipu, unsigned long reg) +{ + return __raw_readl(ipu->reg_ic + reg); +} + +#define idmac_read_icreg(ipu, reg) __idmac_read_icreg(ipu, reg - IC_CONF) + +static void __idmac_write_icreg(struct ipu *ipu, u32 value, unsigned long reg) +{ + __raw_writel(value, ipu->reg_ic + reg); +} + +#define idmac_write_icreg(ipu, v, reg) __idmac_write_icreg(ipu, v, reg - IC_CONF) + +static u32 idmac_read_ipureg(struct ipu *ipu, unsigned long reg) +{ + return __raw_readl(ipu->reg_ipu + reg); +} + +static void idmac_write_ipureg(struct ipu *ipu, u32 value, unsigned long reg) +{ + __raw_writel(value, ipu->reg_ipu + reg); +} + +/***************************************************************************** + * IPU / IC common functions + */ +static void dump_idmac_reg(struct ipu *ipu) +{ + dev_dbg(ipu->dev, "IDMAC_CONF 0x%x, IC_CONF 0x%x, IDMAC_CHA_EN 0x%x, " + "IDMAC_CHA_PRI 0x%x, IDMAC_CHA_BUSY 0x%x\n", + idmac_read_icreg(ipu, IDMAC_CONF), + idmac_read_icreg(ipu, IC_CONF), + idmac_read_icreg(ipu, IDMAC_CHA_EN), + idmac_read_icreg(ipu, IDMAC_CHA_PRI), + idmac_read_icreg(ipu, IDMAC_CHA_BUSY)); + dev_dbg(ipu->dev, "BUF0_RDY 0x%x, BUF1_RDY 0x%x, CUR_BUF 0x%x, " + "DB_MODE 0x%x, TASKS_STAT 0x%x\n", + idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY), + idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY), + idmac_read_ipureg(ipu, IPU_CHA_CUR_BUF), + idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL), + idmac_read_ipureg(ipu, IPU_TASKS_STAT)); +} + +static uint32_t bytes_per_pixel(enum pixel_fmt fmt) +{ + switch (fmt) { + case IPU_PIX_FMT_GENERIC: /* generic data */ + case IPU_PIX_FMT_RGB332: + case IPU_PIX_FMT_YUV420P: + case IPU_PIX_FMT_YUV422P: + default: + return 1; + case IPU_PIX_FMT_RGB565: + case IPU_PIX_FMT_YUYV: + case IPU_PIX_FMT_UYVY: + return 2; + case IPU_PIX_FMT_BGR24: + case IPU_PIX_FMT_RGB24: + return 3; + case IPU_PIX_FMT_GENERIC_32: /* generic data */ + case IPU_PIX_FMT_BGR32: + case IPU_PIX_FMT_RGB32: + case IPU_PIX_FMT_ABGR32: + return 4; + } +} + +/* Enable / disable direct write to memory by the Camera Sensor Interface */ +static void ipu_ic_enable_task(struct ipu *ipu, enum ipu_channel channel) +{ + uint32_t ic_conf, mask; + + switch (channel) { + case IDMAC_IC_0: + mask = IC_CONF_PRPENC_EN; + break; + case IDMAC_IC_7: + mask = IC_CONF_RWS_EN | IC_CONF_PRPENC_EN; + break; + default: + return; + } + ic_conf = idmac_read_icreg(ipu, IC_CONF) | mask; + idmac_write_icreg(ipu, ic_conf, IC_CONF); +} + +static void ipu_ic_disable_task(struct ipu *ipu, enum ipu_channel channel) +{ + uint32_t ic_conf, mask; + + switch (channel) { + case IDMAC_IC_0: + mask = IC_CONF_PRPENC_EN; + break; + case IDMAC_IC_7: + mask = IC_CONF_RWS_EN | IC_CONF_PRPENC_EN; + break; + default: + return; + } + ic_conf = idmac_read_icreg(ipu, IC_CONF) & ~mask; + idmac_write_icreg(ipu, ic_conf, IC_CONF); +} + +static uint32_t ipu_channel_status(struct ipu *ipu, enum ipu_channel channel) +{ + uint32_t stat = TASK_STAT_IDLE; + uint32_t task_stat_reg = idmac_read_ipureg(ipu, IPU_TASKS_STAT); + + switch (channel) { + case IDMAC_IC_7: + stat = (task_stat_reg & TSTAT_CSI2MEM_MASK) >> + TSTAT_CSI2MEM_OFFSET; + break; + case IDMAC_IC_0: + case IDMAC_SDC_0: + case IDMAC_SDC_1: + default: + break; + } + return stat; +} + +struct chan_param_mem_planar { + /* Word 0 */ + u32 xv:10; + u32 yv:10; + u32 xb:12; + + u32 yb:12; + u32 res1:2; + u32 nsb:1; + u32 lnpb:6; + u32 ubo_l:11; + + u32 ubo_h:15; + u32 vbo_l:17; + + u32 vbo_h:9; + u32 res2:3; + u32 fw:12; + u32 fh_l:8; + + u32 fh_h:4; + u32 res3:28; + + /* Word 1 */ + u32 eba0; + + u32 eba1; + + u32 bpp:3; + u32 sl:14; + u32 pfs:3; + u32 bam:3; + u32 res4:2; + u32 npb:6; + u32 res5:1; + + u32 sat:2; + u32 res6:30; +} __attribute__ ((packed)); + +struct chan_param_mem_interleaved { + /* Word 0 */ + u32 xv:10; + u32 yv:10; + u32 xb:12; + + u32 yb:12; + u32 sce:1; + u32 res1:1; + u32 nsb:1; + u32 lnpb:6; + u32 sx:10; + u32 sy_l:1; + + u32 sy_h:9; + u32 ns:10; + u32 sm:10; + u32 sdx_l:3; + + u32 sdx_h:2; + u32 sdy:5; + u32 sdrx:1; + u32 sdry:1; + u32 sdr1:1; + u32 res2:2; + u32 fw:12; + u32 fh_l:8; + + u32 fh_h:4; + u32 res3:28; + + /* Word 1 */ + u32 eba0; + + u32 eba1; + + u32 bpp:3; + u32 sl:14; + u32 pfs:3; + u32 bam:3; + u32 res4:2; + u32 npb:6; + u32 res5:1; + + u32 sat:2; + u32 scc:1; + u32 ofs0:5; + u32 ofs1:5; + u32 ofs2:5; + u32 ofs3:5; + u32 wid0:3; + u32 wid1:3; + u32 wid2:3; + + u32 wid3:3; + u32 dec_sel:1; + u32 res6:28; +} __attribute__ ((packed)); + +union chan_param_mem { + struct chan_param_mem_planar pp; + struct chan_param_mem_interleaved ip; +}; + +static void ipu_ch_param_set_plane_offset(union chan_param_mem *params, + u32 u_offset, u32 v_offset) +{ + params->pp.ubo_l = u_offset & 0x7ff; + params->pp.ubo_h = u_offset >> 11; + params->pp.vbo_l = v_offset & 0x1ffff; + params->pp.vbo_h = v_offset >> 17; +} + +static void ipu_ch_param_set_size(union chan_param_mem *params, + uint32_t pixel_fmt, uint16_t width, + uint16_t height, uint16_t stride) +{ + u32 u_offset; + u32 v_offset; + + params->pp.fw = width - 1; + params->pp.fh_l = height - 1; + params->pp.fh_h = (height - 1) >> 8; + params->pp.sl = stride - 1; + + switch (pixel_fmt) { + case IPU_PIX_FMT_GENERIC: + /*Represents 8-bit Generic data */ + params->pp.bpp = 3; + params->pp.pfs = 7; + params->pp.npb = 31; + params->pp.sat = 2; /* SAT = use 32-bit access */ + break; + case IPU_PIX_FMT_GENERIC_32: + /*Represents 32-bit Generic data */ + params->pp.bpp = 0; + params->pp.pfs = 7; + params->pp.npb = 7; + params->pp.sat = 2; /* SAT = use 32-bit access */ + break; + case IPU_PIX_FMT_RGB565: + params->ip.bpp = 2; + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 0; /* Red bit offset */ + params->ip.ofs1 = 5; /* Green bit offset */ + params->ip.ofs2 = 11; /* Blue bit offset */ + params->ip.ofs3 = 16; /* Alpha bit offset */ + params->ip.wid0 = 4; /* Red bit width - 1 */ + params->ip.wid1 = 5; /* Green bit width - 1 */ + params->ip.wid2 = 4; /* Blue bit width - 1 */ + break; + case IPU_PIX_FMT_BGR24: + params->ip.bpp = 1; /* 24 BPP & RGB PFS */ + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 0; /* Red bit offset */ + params->ip.ofs1 = 8; /* Green bit offset */ + params->ip.ofs2 = 16; /* Blue bit offset */ + params->ip.ofs3 = 24; /* Alpha bit offset */ + params->ip.wid0 = 7; /* Red bit width - 1 */ + params->ip.wid1 = 7; /* Green bit width - 1 */ + params->ip.wid2 = 7; /* Blue bit width - 1 */ + break; + case IPU_PIX_FMT_RGB24: + params->ip.bpp = 1; /* 24 BPP & RGB PFS */ + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 16; /* Red bit offset */ + params->ip.ofs1 = 8; /* Green bit offset */ + params->ip.ofs2 = 0; /* Blue bit offset */ + params->ip.ofs3 = 24; /* Alpha bit offset */ + params->ip.wid0 = 7; /* Red bit width - 1 */ + params->ip.wid1 = 7; /* Green bit width - 1 */ + params->ip.wid2 = 7; /* Blue bit width - 1 */ + break; + case IPU_PIX_FMT_BGRA32: + case IPU_PIX_FMT_BGR32: + params->ip.bpp = 0; + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 8; /* Red bit offset */ + params->ip.ofs1 = 16; /* Green bit offset */ + params->ip.ofs2 = 24; /* Blue bit offset */ + params->ip.ofs3 = 0; /* Alpha bit offset */ + params->ip.wid0 = 7; /* Red bit width - 1 */ + params->ip.wid1 = 7; /* Green bit width - 1 */ + params->ip.wid2 = 7; /* Blue bit width - 1 */ + params->ip.wid3 = 7; /* Alpha bit width - 1 */ + break; + case IPU_PIX_FMT_RGBA32: + case IPU_PIX_FMT_RGB32: + params->ip.bpp = 0; + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 24; /* Red bit offset */ + params->ip.ofs1 = 16; /* Green bit offset */ + params->ip.ofs2 = 8; /* Blue bit offset */ + params->ip.ofs3 = 0; /* Alpha bit offset */ + params->ip.wid0 = 7; /* Red bit width - 1 */ + params->ip.wid1 = 7; /* Green bit width - 1 */ + params->ip.wid2 = 7; /* Blue bit width - 1 */ + params->ip.wid3 = 7; /* Alpha bit width - 1 */ + break; + case IPU_PIX_FMT_ABGR32: + params->ip.bpp = 0; + params->ip.pfs = 4; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + params->ip.ofs0 = 8; /* Red bit offset */ + params->ip.ofs1 = 16; /* Green bit offset */ + params->ip.ofs2 = 24; /* Blue bit offset */ + params->ip.ofs3 = 0; /* Alpha bit offset */ + params->ip.wid0 = 7; /* Red bit width - 1 */ + params->ip.wid1 = 7; /* Green bit width - 1 */ + params->ip.wid2 = 7; /* Blue bit width - 1 */ + params->ip.wid3 = 7; /* Alpha bit width - 1 */ + break; + case IPU_PIX_FMT_UYVY: + params->ip.bpp = 2; + params->ip.pfs = 6; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + break; + case IPU_PIX_FMT_YUV420P2: + case IPU_PIX_FMT_YUV420P: + params->ip.bpp = 3; + params->ip.pfs = 3; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + u_offset = stride * height; + v_offset = u_offset + u_offset / 4; + ipu_ch_param_set_plane_offset(params, u_offset, v_offset); + break; + case IPU_PIX_FMT_YVU422P: + params->ip.bpp = 3; + params->ip.pfs = 2; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + v_offset = stride * height; + u_offset = v_offset + v_offset / 2; + ipu_ch_param_set_plane_offset(params, u_offset, v_offset); + break; + case IPU_PIX_FMT_YUV422P: + params->ip.bpp = 3; + params->ip.pfs = 2; + params->ip.npb = 7; + params->ip.sat = 2; /* SAT = 32-bit access */ + u_offset = stride * height; + v_offset = u_offset + u_offset / 2; + ipu_ch_param_set_plane_offset(params, u_offset, v_offset); + break; + default: + dev_err(ipu_data.dev, + "mxc ipu: unimplemented pixel format %d\n", pixel_fmt); + break; + } + + params->pp.nsb = 1; +} + +static void ipu_ch_param_set_burst_size(union chan_param_mem *params, + uint16_t burst_pixels) +{ + params->pp.npb = burst_pixels - 1; +}; + +static void ipu_ch_param_set_buffer(union chan_param_mem *params, + dma_addr_t buf0, dma_addr_t buf1) +{ + params->pp.eba0 = buf0; + params->pp.eba1 = buf1; +}; + +static void ipu_ch_param_set_rotation(union chan_param_mem *params, + enum ipu_rotate_mode rotate) +{ + params->pp.bam = rotate; +}; + +static void ipu_write_param_mem(uint32_t addr, uint32_t *data, + uint32_t num_words) +{ + for (; num_words > 0; num_words--) { + dev_dbg(ipu_data.dev, + "write param mem - addr = 0x%08X, data = 0x%08X\n", + addr, *data); + idmac_write_ipureg(&ipu_data, addr, IPU_IMA_ADDR); + idmac_write_ipureg(&ipu_data, *data++, IPU_IMA_DATA); + addr++; + if ((addr & 0x7) == 5) { + addr &= ~0x7; /* set to word 0 */ + addr += 8; /* increment to next row */ + } + } +} + +static int calc_resize_coeffs(uint32_t in_size, uint32_t out_size, + uint32_t *resize_coeff, + uint32_t *downsize_coeff) +{ + uint32_t temp_size; + uint32_t temp_downsize; + + *resize_coeff = 1 << 13; + *downsize_coeff = 1 << 13; + + /* Cannot downsize more than 8:1 */ + if (out_size << 3 < in_size) + return -EINVAL; + + /* compute downsizing coefficient */ + temp_downsize = 0; + temp_size = in_size; + while (temp_size >= out_size * 2 && temp_downsize < 2) { + temp_size >>= 1; + temp_downsize++; + } + *downsize_coeff = temp_downsize; + + /* + * compute resizing coefficient using the following formula: + * resize_coeff = M*(SI -1)/(SO - 1) + * where M = 2^13, SI - input size, SO - output size + */ + *resize_coeff = (8192L * (temp_size - 1)) / (out_size - 1); + if (*resize_coeff >= 16384L) { + dev_err(ipu_data.dev, "Warning! Overflow on resize coeff.\n"); + *resize_coeff = 0x3FFF; + } + + dev_dbg(ipu_data.dev, "resizing from %u -> %u pixels, " + "downsize=%u, resize=%u.%lu (reg=%u)\n", in_size, out_size, + *downsize_coeff, *resize_coeff >= 8192L ? 1 : 0, + ((*resize_coeff & 0x1FFF) * 10000L) / 8192L, *resize_coeff); + + return 0; +} + +static enum ipu_color_space format_to_colorspace(enum pixel_fmt fmt) +{ + switch (fmt) { + case IPU_PIX_FMT_RGB565: + case IPU_PIX_FMT_BGR24: + case IPU_PIX_FMT_RGB24: + case IPU_PIX_FMT_BGR32: + case IPU_PIX_FMT_RGB32: + return IPU_COLORSPACE_RGB; + default: + return IPU_COLORSPACE_YCBCR; + } +} + +static int ipu_ic_init_prpenc(struct ipu *ipu, + union ipu_channel_param *params, bool src_is_csi) +{ + uint32_t reg, ic_conf; + uint32_t downsize_coeff, resize_coeff; + enum ipu_color_space in_fmt, out_fmt; + + /* Setup vertical resizing */ + calc_resize_coeffs(params->video.in_height, + params->video.out_height, + &resize_coeff, &downsize_coeff); + reg = (downsize_coeff << 30) | (resize_coeff << 16); + + /* Setup horizontal resizing */ + calc_resize_coeffs(params->video.in_width, + params->video.out_width, + &resize_coeff, &downsize_coeff); + reg |= (downsize_coeff << 14) | resize_coeff; + + /* Setup color space conversion */ + in_fmt = format_to_colorspace(params->video.in_pixel_fmt); + out_fmt = format_to_colorspace(params->video.out_pixel_fmt); + + /* + * Colourspace conversion unsupported yet - see _init_csc() in + * Freescale sources + */ + if (in_fmt != out_fmt) { + dev_err(ipu->dev, "Colourspace conversion unsupported!\n"); + return -EOPNOTSUPP; + } + + idmac_write_icreg(ipu, reg, IC_PRP_ENC_RSC); + + ic_conf = idmac_read_icreg(ipu, IC_CONF); + + if (src_is_csi) + ic_conf &= ~IC_CONF_RWS_EN; + else + ic_conf |= IC_CONF_RWS_EN; + + idmac_write_icreg(ipu, ic_conf, IC_CONF); + + return 0; +} + +static uint32_t dma_param_addr(uint32_t dma_ch) +{ + /* Channel Parameter Memory */ + return 0x10000 | (dma_ch << 4); +}; + +static void ipu_channel_set_priority(struct ipu *ipu, enum ipu_channel channel, + bool prio) +{ + u32 reg = idmac_read_icreg(ipu, IDMAC_CHA_PRI); + + if (prio) + reg |= 1UL << channel; + else + reg &= ~(1UL << channel); + + idmac_write_icreg(ipu, reg, IDMAC_CHA_PRI); + + dump_idmac_reg(ipu); +} + +static uint32_t ipu_channel_conf_mask(enum ipu_channel channel) +{ + uint32_t mask; + + switch (channel) { + case IDMAC_IC_0: + case IDMAC_IC_7: + mask = IPU_CONF_CSI_EN | IPU_CONF_IC_EN; + break; + case IDMAC_SDC_0: + case IDMAC_SDC_1: + mask = IPU_CONF_SDC_EN | IPU_CONF_DI_EN; + break; + default: + mask = 0; + break; + } + + return mask; +} + +/** + * ipu_enable_channel() - enable an IPU channel. + * @channel: channel ID. + * @return: 0 on success or negative error code on failure. + */ +static int ipu_enable_channel(struct idmac *idmac, struct idmac_channel *ichan) +{ + struct ipu *ipu = to_ipu(idmac); + enum ipu_channel channel = ichan->dma_chan.chan_id; + uint32_t reg; + unsigned long flags; + + spin_lock_irqsave(&ipu->lock, flags); + + /* Reset to buffer 0 */ + idmac_write_ipureg(ipu, 1UL << channel, IPU_CHA_CUR_BUF); + ichan->active_buffer = 0; + ichan->status = IPU_CHANNEL_ENABLED; + + switch (channel) { + case IDMAC_SDC_0: + case IDMAC_SDC_1: + case IDMAC_IC_7: + ipu_channel_set_priority(ipu, channel, true); + default: + break; + } + + reg = idmac_read_icreg(ipu, IDMAC_CHA_EN); + + idmac_write_icreg(ipu, reg | (1UL << channel), IDMAC_CHA_EN); + + ipu_ic_enable_task(ipu, channel); + + spin_unlock_irqrestore(&ipu->lock, flags); + return 0; +} + +/** + * ipu_init_channel_buffer() - initialize a buffer for logical IPU channel. + * @channel: channel ID. + * @pixel_fmt: pixel format of buffer. Pixel format is a FOURCC ASCII code. + * @width: width of buffer in pixels. + * @height: height of buffer in pixels. + * @stride: stride length of buffer in pixels. + * @rot_mode: rotation mode of buffer. A rotation setting other than + * IPU_ROTATE_VERT_FLIP should only be used for input buffers of + * rotation channels. + * @phyaddr_0: buffer 0 physical address. + * @phyaddr_1: buffer 1 physical address. Setting this to a value other than + * NULL enables double buffering mode. + * @return: 0 on success or negative error code on failure. + */ +static int ipu_init_channel_buffer(struct idmac_channel *ichan, + enum pixel_fmt pixel_fmt, + uint16_t width, uint16_t height, + uint32_t stride, + enum ipu_rotate_mode rot_mode, + dma_addr_t phyaddr_0, dma_addr_t phyaddr_1) +{ + enum ipu_channel channel = ichan->dma_chan.chan_id; + struct idmac *idmac = to_idmac(ichan->dma_chan.device); + struct ipu *ipu = to_ipu(idmac); + union chan_param_mem params = {}; + unsigned long flags; + uint32_t reg; + uint32_t stride_bytes; + + stride_bytes = stride * bytes_per_pixel(pixel_fmt); + + if (stride_bytes % 4) { + dev_err(ipu->dev, + "Stride length must be 32-bit aligned, stride = %d, bytes = %d\n", + stride, stride_bytes); + return -EINVAL; + } + + /* IC channel's stride must be a multiple of 8 pixels */ + if ((channel <= 13) && (stride % 8)) { + dev_err(ipu->dev, "Stride must be 8 pixel multiple\n"); + return -EINVAL; + } + + /* Build parameter memory data for DMA channel */ + ipu_ch_param_set_size(¶ms, pixel_fmt, width, height, stride_bytes); + ipu_ch_param_set_buffer(¶ms, phyaddr_0, phyaddr_1); + ipu_ch_param_set_rotation(¶ms, rot_mode); + /* Some channels (rotation) have restriction on burst length */ + switch (channel) { + case IDMAC_IC_7: /* Hangs with burst 8, 16, other values + invalid - Table 44-30 */ +/* + ipu_ch_param_set_burst_size(¶ms, 8); + */ + break; + case IDMAC_SDC_0: + case IDMAC_SDC_1: + /* In original code only IPU_PIX_FMT_RGB565 was setting burst */ + ipu_ch_param_set_burst_size(¶ms, 16); + break; + case IDMAC_IC_0: + default: + break; + } + + spin_lock_irqsave(&ipu->lock, flags); + + ipu_write_param_mem(dma_param_addr(channel), (uint32_t *)¶ms, 10); + + reg = idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL); + + if (phyaddr_1) + reg |= 1UL << channel; + else + reg &= ~(1UL << channel); + + idmac_write_ipureg(ipu, reg, IPU_CHA_DB_MODE_SEL); + + ichan->status = IPU_CHANNEL_READY; + + spin_unlock_irqrestore(ipu->lock, flags); + + return 0; +} + +/** + * ipu_select_buffer() - mark a channel's buffer as ready. + * @channel: channel ID. + * @buffer_n: buffer number to mark ready. + */ +static void ipu_select_buffer(enum ipu_channel channel, int buffer_n) +{ + /* No locking - this is a write-one-to-set register, cleared by IPU */ + if (buffer_n == 0) + /* Mark buffer 0 as ready. */ + idmac_write_ipureg(&ipu_data, 1UL << channel, IPU_CHA_BUF0_RDY); + else + /* Mark buffer 1 as ready. */ + idmac_write_ipureg(&ipu_data, 1UL << channel, IPU_CHA_BUF1_RDY); +} + +/** + * ipu_update_channel_buffer() - update physical address of a channel buffer. + * @channel: channel ID. + * @buffer_n: buffer number to update. + * 0 or 1 are the only valid values. + * @phyaddr: buffer physical address. + * @return: Returns 0 on success or negative error code on failure. This + * function will fail if the buffer is set to ready. + */ +/* Called under spin_lock(_irqsave)(&ichan->lock) */ +static int ipu_update_channel_buffer(enum ipu_channel channel, + int buffer_n, dma_addr_t phyaddr) +{ + uint32_t reg; + unsigned long flags; + + spin_lock_irqsave(&ipu_data.lock, flags); + + if (buffer_n == 0) { + reg = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF0_RDY); + if (reg & (1UL << channel)) { + spin_unlock_irqrestore(&ipu_data.lock, flags); + return -EACCES; + } + + /* 44.3.3.1.9 - Row Number 1 (WORD1, offset 0) */ + idmac_write_ipureg(&ipu_data, dma_param_addr(channel) + + 0x0008UL, IPU_IMA_ADDR); + idmac_write_ipureg(&ipu_data, phyaddr, IPU_IMA_DATA); + } else { + reg = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF1_RDY); + if (reg & (1UL << channel)) { + spin_unlock_irqrestore(&ipu_data.lock, flags); + return -EACCES; + } + + /* Check if double-buffering is already enabled */ + reg = idmac_read_ipureg(&ipu_data, IPU_CHA_DB_MODE_SEL); + + if (!(reg & (1UL << channel))) + idmac_write_ipureg(&ipu_data, reg | (1UL << channel), + IPU_CHA_DB_MODE_SEL); + + /* 44.3.3.1.9 - Row Number 1 (WORD1, offset 1) */ + idmac_write_ipureg(&ipu_data, dma_param_addr(channel) + + 0x0009UL, IPU_IMA_ADDR); + idmac_write_ipureg(&ipu_data, phyaddr, IPU_IMA_DATA); + } + + spin_unlock_irqrestore(&ipu_data.lock, flags); + + return 0; +} + +/* Called under spin_lock_irqsave(&ichan->lock) */ +static int ipu_submit_channel_buffers(struct idmac_channel *ichan, + struct idmac_tx_desc *desc) +{ + struct scatterlist *sg; + int i, ret = 0; + + for (i = 0, sg = desc->sg; i < 2 && sg; i++) { + if (!ichan->sg[i]) { + ichan->sg[i] = sg; + + /* + * On first invocation this shouldn't be necessary, the + * call to ipu_init_channel_buffer() above will set + * addresses for us, so we could make it conditional + * on status >= IPU_CHANNEL_ENABLED, but doing it again + * shouldn't hurt either. + */ + ret = ipu_update_channel_buffer(ichan->dma_chan.chan_id, i, + sg_dma_address(sg)); + if (ret < 0) + return ret; + + ipu_select_buffer(ichan->dma_chan.chan_id, i); + + sg = sg_next(sg); + } + } + + return ret; +} + +static dma_cookie_t idmac_tx_submit(struct dma_async_tx_descriptor *tx) +{ + struct idmac_tx_desc *desc = to_tx_desc(tx); + struct idmac_channel *ichan = to_idmac_chan(tx->chan); + struct idmac *idmac = to_idmac(tx->chan->device); + struct ipu *ipu = to_ipu(idmac); + dma_cookie_t cookie; + unsigned long flags; + + /* Sanity check */ + if (!list_empty(&desc->list)) { + /* The descriptor doesn't belong to client */ + dev_err(&ichan->dma_chan.dev->device, + "Descriptor %p not prepared!\n", tx); + return -EBUSY; + } + + mutex_lock(&ichan->chan_mutex); + + if (ichan->status < IPU_CHANNEL_READY) { + struct idmac_video_param *video = &ichan->params.video; + /* + * Initial buffer assignment - the first two sg-entries from + * the descriptor will end up in the IDMAC buffers + */ + dma_addr_t dma_1 = sg_is_last(desc->sg) ? 0 : + sg_dma_address(&desc->sg[1]); + + WARN_ON(ichan->sg[0] || ichan->sg[1]); + + cookie = ipu_init_channel_buffer(ichan, + video->out_pixel_fmt, + video->out_width, + video->out_height, + video->out_stride, + IPU_ROTATE_NONE, + sg_dma_address(&desc->sg[0]), + dma_1); + if (cookie < 0) + goto out; + } + + /* ipu->lock can be taken under ichan->lock, but not v.v. */ + spin_lock_irqsave(&ichan->lock, flags); + + /* submit_buffers() atomically verifies and fills empty sg slots */ + cookie = ipu_submit_channel_buffers(ichan, desc); + + spin_unlock_irqrestore(&ichan->lock, flags); + + if (cookie < 0) + goto out; + + cookie = ichan->dma_chan.cookie; + + if (++cookie < 0) + cookie = 1; + + /* from dmaengine.h: "last cookie value returned to client" */ + ichan->dma_chan.cookie = cookie; + tx->cookie = cookie; + spin_lock_irqsave(&ichan->lock, flags); + list_add_tail(&desc->list, &ichan->queue); + spin_unlock_irqrestore(&ichan->lock, flags); + + if (ichan->status < IPU_CHANNEL_ENABLED) { + int ret = ipu_enable_channel(idmac, ichan); + if (ret < 0) { + cookie = ret; + spin_lock_irqsave(&ichan->lock, flags); + list_del_init(&desc->list); + spin_unlock_irqrestore(&ichan->lock, flags); + tx->cookie = cookie; + ichan->dma_chan.cookie = cookie; + } + } + + dump_idmac_reg(ipu); + +out: + mutex_unlock(&ichan->chan_mutex); + + return cookie; +} + +/* Called with ichan->chan_mutex held */ +static int idmac_desc_alloc(struct idmac_channel *ichan, int n) +{ + struct idmac_tx_desc *desc = vmalloc(n * sizeof(struct idmac_tx_desc)); + struct idmac *idmac = to_idmac(ichan->dma_chan.device); + + if (!desc) + return -ENOMEM; + + /* No interrupts, just disable the tasklet for a moment */ + tasklet_disable(&to_ipu(idmac)->tasklet); + + ichan->n_tx_desc = n; + ichan->desc = desc; + INIT_LIST_HEAD(&ichan->queue); + INIT_LIST_HEAD(&ichan->free_list); + + while (n--) { + struct dma_async_tx_descriptor *txd = &desc->txd; + + memset(txd, 0, sizeof(*txd)); + dma_async_tx_descriptor_init(txd, &ichan->dma_chan); + txd->tx_submit = idmac_tx_submit; + txd->chan = &ichan->dma_chan; + INIT_LIST_HEAD(&txd->tx_list); + + list_add(&desc->list, &ichan->free_list); + + desc++; + } + + tasklet_enable(&to_ipu(idmac)->tasklet); + + return 0; +} + +/** + * ipu_init_channel() - initialize an IPU channel. + * @idmac: IPU DMAC context. + * @ichan: pointer to the channel object. + * @return 0 on success or negative error code on failure. + */ +static int ipu_init_channel(struct idmac *idmac, struct idmac_channel *ichan) +{ + union ipu_channel_param *params = &ichan->params; + uint32_t ipu_conf; + enum ipu_channel channel = ichan->dma_chan.chan_id; + unsigned long flags; + uint32_t reg; + struct ipu *ipu = to_ipu(idmac); + int ret = 0, n_desc = 0; + + dev_dbg(ipu->dev, "init channel = %d\n", channel); + + if (channel != IDMAC_SDC_0 && channel != IDMAC_SDC_1 && + channel != IDMAC_IC_7) + return -EINVAL; + + spin_lock_irqsave(&ipu->lock, flags); + + switch (channel) { + case IDMAC_IC_7: + n_desc = 16; + reg = idmac_read_icreg(ipu, IC_CONF); + idmac_write_icreg(ipu, reg & ~IC_CONF_CSI_MEM_WR_EN, IC_CONF); + break; + case IDMAC_IC_0: + n_desc = 16; + reg = idmac_read_ipureg(ipu, IPU_FS_PROC_FLOW); + idmac_write_ipureg(ipu, reg & ~FS_ENC_IN_VALID, IPU_FS_PROC_FLOW); + ret = ipu_ic_init_prpenc(ipu, params, true); + break; + case IDMAC_SDC_0: + case IDMAC_SDC_1: + n_desc = 4; + default: + break; + } + + ipu->channel_init_mask |= 1L << channel; + + /* Enable IPU sub module */ + ipu_conf = idmac_read_ipureg(ipu, IPU_CONF) | + ipu_channel_conf_mask(channel); + idmac_write_ipureg(ipu, ipu_conf, IPU_CONF); + + spin_unlock_irqrestore(&ipu->lock, flags); + + if (n_desc && !ichan->desc) + ret = idmac_desc_alloc(ichan, n_desc); + + dump_idmac_reg(ipu); + + return ret; +} + +/** + * ipu_uninit_channel() - uninitialize an IPU channel. + * @idmac: IPU DMAC context. + * @ichan: pointer to the channel object. + */ +static void ipu_uninit_channel(struct idmac *idmac, struct idmac_channel *ichan) +{ + enum ipu_channel channel = ichan->dma_chan.chan_id; + unsigned long flags; + uint32_t reg; + unsigned long chan_mask = 1UL << channel; + uint32_t ipu_conf; + struct ipu *ipu = to_ipu(idmac); + + spin_lock_irqsave(&ipu->lock, flags); + + if (!(ipu->channel_init_mask & chan_mask)) { + dev_err(ipu->dev, "Channel already uninitialized %d\n", + channel); + spin_unlock_irqrestore(&ipu->lock, flags); + return; + } + + /* Reset the double buffer */ + reg = idmac_read_ipureg(ipu, IPU_CHA_DB_MODE_SEL); + idmac_write_ipureg(ipu, reg & ~chan_mask, IPU_CHA_DB_MODE_SEL); + + ichan->sec_chan_en = false; + + switch (channel) { + case IDMAC_IC_7: + reg = idmac_read_icreg(ipu, IC_CONF); + idmac_write_icreg(ipu, reg & ~(IC_CONF_RWS_EN | IC_CONF_PRPENC_EN), + IC_CONF); + break; + case IDMAC_IC_0: + reg = idmac_read_icreg(ipu, IC_CONF); + idmac_write_icreg(ipu, reg & ~(IC_CONF_PRPENC_EN | IC_CONF_PRPENC_CSC1), + IC_CONF); + break; + case IDMAC_SDC_0: + case IDMAC_SDC_1: + default: + break; + } + + ipu->channel_init_mask &= ~(1L << channel); + + ipu_conf = idmac_read_ipureg(ipu, IPU_CONF) & + ~ipu_channel_conf_mask(channel); + idmac_write_ipureg(ipu, ipu_conf, IPU_CONF); + + spin_unlock_irqrestore(&ipu->lock, flags); + + ichan->n_tx_desc = 0; + vfree(ichan->desc); + ichan->desc = NULL; +} + +/** + * ipu_disable_channel() - disable an IPU channel. + * @idmac: IPU DMAC context. + * @ichan: channel object pointer. + * @wait_for_stop: flag to set whether to wait for channel end of frame or + * return immediately. + * @return: 0 on success or negative error code on failure. + */ +static int ipu_disable_channel(struct idmac *idmac, struct idmac_channel *ichan, + bool wait_for_stop) +{ + enum ipu_channel channel = ichan->dma_chan.chan_id; + struct ipu *ipu = to_ipu(idmac); + uint32_t reg; + unsigned long flags; + unsigned long chan_mask = 1UL << channel; + unsigned int timeout; + + if (wait_for_stop && channel != IDMAC_SDC_1 && channel != IDMAC_SDC_0) { + timeout = 40; + /* This waiting always fails. Related to spurious irq problem */ + while ((idmac_read_icreg(ipu, IDMAC_CHA_BUSY) & chan_mask) || + (ipu_channel_status(ipu, channel) == TASK_STAT_ACTIVE)) { + timeout--; + msleep(10); + + if (!timeout) { + dev_dbg(ipu->dev, + "Warning: timeout waiting for channel %u to " + "stop: buf0_rdy = 0x%08X, buf1_rdy = 0x%08X, " + "busy = 0x%08X, tstat = 0x%08X\n", channel, + idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY), + idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY), + idmac_read_icreg(ipu, IDMAC_CHA_BUSY), + idmac_read_ipureg(ipu, IPU_TASKS_STAT)); + break; + } + } + dev_dbg(ipu->dev, "timeout = %d * 10ms\n", 40 - timeout); + } + /* SDC BG and FG must be disabled before DMA is disabled */ + if (wait_for_stop && (channel == IDMAC_SDC_0 || + channel == IDMAC_SDC_1)) { + for (timeout = 5; + timeout && !ipu_irq_status(ichan->eof_irq); timeout--) + msleep(5); + } + + spin_lock_irqsave(&ipu->lock, flags); + + /* Disable IC task */ + ipu_ic_disable_task(ipu, channel); + + /* Disable DMA channel(s) */ + reg = idmac_read_icreg(ipu, IDMAC_CHA_EN); + idmac_write_icreg(ipu, reg & ~chan_mask, IDMAC_CHA_EN); + + /* + * Problem (observed with channel DMAIC_7): after enabling the channel + * and initialising buffers, there comes an interrupt with current still + * pointing at buffer 0, whereas it should use buffer 0 first and only + * generate an interrupt when it is done, then current should already + * point to buffer 1. This spurious interrupt also comes on channel + * DMASDC_0. With DMAIC_7 normally, is we just leave the ISR after the + * first interrupt, there comes the second with current correctly + * pointing to buffer 1 this time. But sometimes this second interrupt + * doesn't come and the channel hangs. Clearing BUFx_RDY when disabling + * the channel seems to prevent the channel from hanging, but it doesn't + * prevent the spurious interrupt. This might also be unsafe. Think + * about the IDMAC controller trying to switch to a buffer, when we + * clear the ready bit, and re-enable it a moment later. + */ + reg = idmac_read_ipureg(ipu, IPU_CHA_BUF0_RDY); + idmac_write_ipureg(ipu, 0, IPU_CHA_BUF0_RDY); + idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF0_RDY); + + reg = idmac_read_ipureg(ipu, IPU_CHA_BUF1_RDY); + idmac_write_ipureg(ipu, 0, IPU_CHA_BUF1_RDY); + idmac_write_ipureg(ipu, reg & ~(1UL << channel), IPU_CHA_BUF1_RDY); + + spin_unlock_irqrestore(&ipu->lock, flags); + + return 0; +} + +/* + * We have several possibilities here: + * current BUF next BUF + * + * not last sg next not last sg + * not last sg next last sg + * last sg first sg from next descriptor + * last sg NULL + * + * Besides, the descriptor queue might be empty or not. We process all these + * cases carefully. + */ +static irqreturn_t idmac_interrupt(int irq, void *dev_id) +{ + struct idmac_channel *ichan = dev_id; + unsigned int chan_id = ichan->dma_chan.chan_id; + struct scatterlist **sg, *sgnext, *sgnew = NULL; + /* Next transfer descriptor */ + struct idmac_tx_desc *desc = NULL, *descnew; + dma_async_tx_callback callback; + void *callback_param; + bool done = false; + u32 ready0 = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF0_RDY), + ready1 = idmac_read_ipureg(&ipu_data, IPU_CHA_BUF1_RDY), + curbuf = idmac_read_ipureg(&ipu_data, IPU_CHA_CUR_BUF); + + /* IDMAC has cleared the respective BUFx_RDY bit, we manage the buffer */ + + pr_debug("IDMAC irq %d\n", irq); + /* Other interrupts do not interfere with this channel */ + spin_lock(&ichan->lock); + + if (unlikely(chan_id != IDMAC_SDC_0 && chan_id != IDMAC_SDC_1 && + ((curbuf >> chan_id) & 1) == ichan->active_buffer)) { + int i = 100; + + /* This doesn't help. See comment in ipu_disable_channel() */ + while (--i) { + curbuf = idmac_read_ipureg(&ipu_data, IPU_CHA_CUR_BUF); + if (((curbuf >> chan_id) & 1) != ichan->active_buffer) + break; + cpu_relax(); + } + + if (!i) { + spin_unlock(&ichan->lock); + dev_dbg(ichan->dma_chan.device->dev, + "IRQ on active buffer on channel %x, active " + "%d, ready %x, %x, current %x!\n", chan_id, + ichan->active_buffer, ready0, ready1, curbuf); + return IRQ_NONE; + } + } + + if (unlikely((ichan->active_buffer && (ready1 >> chan_id) & 1) || + (!ichan->active_buffer && (ready0 >> chan_id) & 1) + )) { + spin_unlock(&ichan->lock); + dev_dbg(ichan->dma_chan.device->dev, + "IRQ with active buffer still ready on channel %x, " + "active %d, ready %x, %x!\n", chan_id, + ichan->active_buffer, ready0, ready1); + return IRQ_NONE; + } + + if (unlikely(list_empty(&ichan->queue))) { + spin_unlock(&ichan->lock); + dev_err(ichan->dma_chan.device->dev, + "IRQ without queued buffers on channel %x, active %d, " + "ready %x, %x!\n", chan_id, + ichan->active_buffer, ready0, ready1); + return IRQ_NONE; + } + + /* + * active_buffer is a software flag, it shows which buffer we are + * currently expecting back from the hardware, IDMAC should be + * processing the other buffer already + */ + sg = &ichan->sg[ichan->active_buffer]; + sgnext = ichan->sg[!ichan->active_buffer]; + + /* + * if sgnext == NULL sg must be the last element in a scatterlist and + * queue must be empty + */ + if (unlikely(!sgnext)) { + if (unlikely(sg_next(*sg))) { + dev_err(ichan->dma_chan.device->dev, + "Broken buffer-update locking on channel %x!\n", + chan_id); + /* We'll let the user catch up */ + } else { + /* Underrun */ + ipu_ic_disable_task(&ipu_data, chan_id); + dev_dbg(ichan->dma_chan.device->dev, + "Underrun on channel %x\n", chan_id); + ichan->status = IPU_CHANNEL_READY; + /* Continue to check for complete descriptor */ + } + } + + desc = list_entry(ichan->queue.next, struct idmac_tx_desc, list); + + /* First calculate and submit the next sg element */ + if (likely(sgnext)) + sgnew = sg_next(sgnext); + + if (unlikely(!sgnew)) { + /* Start a new scatterlist, if any queued */ + if (likely(desc->list.next != &ichan->queue)) { + descnew = list_entry(desc->list.next, + struct idmac_tx_desc, list); + sgnew = &descnew->sg[0]; + } + } + + if (unlikely(!sg_next(*sg)) || !sgnext) { + /* + * Last element in scatterlist done, remove from the queue, + * _init for debugging + */ + list_del_init(&desc->list); + done = true; + } + + *sg = sgnew; + + if (likely(sgnew)) { + int ret; + + ret = ipu_update_channel_buffer(chan_id, ichan->active_buffer, + sg_dma_address(*sg)); + if (ret < 0) + dev_err(ichan->dma_chan.device->dev, + "Failed to update buffer on channel %x buffer %d!\n", + chan_id, ichan->active_buffer); + else + ipu_select_buffer(chan_id, ichan->active_buffer); + } + + /* Flip the active buffer - even if update above failed */ + ichan->active_buffer = !ichan->active_buffer; + if (done) + ichan->completed = desc->txd.cookie; + + callback = desc->txd.callback; + callback_param = desc->txd.callback_param; + + spin_unlock(&ichan->lock); + + if (done && (desc->txd.flags & DMA_PREP_INTERRUPT) && callback) + callback(callback_param); + + return IRQ_HANDLED; +} + +static void ipu_gc_tasklet(unsigned long arg) +{ + struct ipu *ipu = (struct ipu *)arg; + int i; + + for (i = 0; i < IPU_CHANNELS_NUM; i++) { + struct idmac_channel *ichan = ipu->channel + i; + struct idmac_tx_desc *desc; + unsigned long flags; + int j; + + for (j = 0; j < ichan->n_tx_desc; j++) { + desc = ichan->desc + j; + spin_lock_irqsave(&ichan->lock, flags); + if (async_tx_test_ack(&desc->txd)) { + list_move(&desc->list, &ichan->free_list); + async_tx_clear_ack(&desc->txd); + } + spin_unlock_irqrestore(&ichan->lock, flags); + } + } +} + +/* + * At the time .device_alloc_chan_resources() method is called, we cannot know, + * whether the client will accept the channel. Thus we must only check, if we + * can satisfy client's request but the only real criterion to verify, whether + * the client has accepted our offer is the client_count. That's why we have to + * perform the rest of our allocation tasks on the first call to this function. + */ +static struct dma_async_tx_descriptor *idmac_prep_slave_sg(struct dma_chan *chan, + struct scatterlist *sgl, unsigned int sg_len, + enum dma_data_direction direction, unsigned long tx_flags) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + struct idmac_tx_desc *desc = NULL; + struct dma_async_tx_descriptor *txd = NULL; + unsigned long flags; + + /* We only can handle these three channels so far */ + if (ichan->dma_chan.chan_id != IDMAC_SDC_0 && ichan->dma_chan.chan_id != IDMAC_SDC_1 && + ichan->dma_chan.chan_id != IDMAC_IC_7) + return NULL; + + if (direction != DMA_FROM_DEVICE && direction != DMA_TO_DEVICE) { + dev_err(chan->device->dev, "Invalid DMA direction %d!\n", direction); + return NULL; + } + + mutex_lock(&ichan->chan_mutex); + + spin_lock_irqsave(&ichan->lock, flags); + if (!list_empty(&ichan->free_list)) { + desc = list_entry(ichan->free_list.next, + struct idmac_tx_desc, list); + + list_del_init(&desc->list); + + desc->sg_len = sg_len; + desc->sg = sgl; + txd = &desc->txd; + txd->flags = tx_flags; + } + spin_unlock_irqrestore(&ichan->lock, flags); + + mutex_unlock(&ichan->chan_mutex); + + tasklet_schedule(&to_ipu(to_idmac(chan->device))->tasklet); + + return txd; +} + +/* Re-select the current buffer and re-activate the channel */ +static void idmac_issue_pending(struct dma_chan *chan) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + struct idmac *idmac = to_idmac(chan->device); + struct ipu *ipu = to_ipu(idmac); + unsigned long flags; + + /* This is not always needed, but doesn't hurt either */ + spin_lock_irqsave(&ipu->lock, flags); + ipu_select_buffer(ichan->dma_chan.chan_id, ichan->active_buffer); + spin_unlock_irqrestore(&ipu->lock, flags); + + /* + * Might need to perform some parts of initialisation from + * ipu_enable_channel(), but not all, we do not want to reset to buffer + * 0, don't need to set priority again either, but re-enabling the task + * and the channel might be a good idea. + */ +} + +static void __idmac_terminate_all(struct dma_chan *chan) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + struct idmac *idmac = to_idmac(chan->device); + unsigned long flags; + int i; + + ipu_disable_channel(idmac, ichan, + ichan->status >= IPU_CHANNEL_ENABLED); + + tasklet_disable(&to_ipu(idmac)->tasklet); + + /* ichan->queue is modified in ISR, have to spinlock */ + spin_lock_irqsave(&ichan->lock, flags); + list_splice_init(&ichan->queue, &ichan->free_list); + + if (ichan->desc) + for (i = 0; i < ichan->n_tx_desc; i++) { + struct idmac_tx_desc *desc = ichan->desc + i; + if (list_empty(&desc->list)) + /* Descriptor was prepared, but not submitted */ + list_add(&desc->list, + &ichan->free_list); + + async_tx_clear_ack(&desc->txd); + } + + ichan->sg[0] = NULL; + ichan->sg[1] = NULL; + spin_unlock_irqrestore(&ichan->lock, flags); + + tasklet_enable(&to_ipu(idmac)->tasklet); + + ichan->status = IPU_CHANNEL_INITIALIZED; +} + +static void idmac_terminate_all(struct dma_chan *chan) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + + mutex_lock(&ichan->chan_mutex); + + __idmac_terminate_all(chan); + + mutex_unlock(&ichan->chan_mutex); +} + +static int idmac_alloc_chan_resources(struct dma_chan *chan) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + struct idmac *idmac = to_idmac(chan->device); + int ret; + + /* dmaengine.c now guarantees to only offer free channels */ + BUG_ON(chan->client_count > 1); + WARN_ON(ichan->status != IPU_CHANNEL_FREE); + + chan->cookie = 1; + ichan->completed = -ENXIO; + + ret = ipu_irq_map(ichan->dma_chan.chan_id); + if (ret < 0) + goto eimap; + + ichan->eof_irq = ret; + ret = request_irq(ichan->eof_irq, idmac_interrupt, 0, + ichan->eof_name, ichan); + if (ret < 0) + goto erirq; + + ret = ipu_init_channel(idmac, ichan); + if (ret < 0) + goto eichan; + + ichan->status = IPU_CHANNEL_INITIALIZED; + + dev_dbg(&ichan->dma_chan.dev->device, "Found channel 0x%x, irq %d\n", + ichan->dma_chan.chan_id, ichan->eof_irq); + + return ret; + +eichan: + free_irq(ichan->eof_irq, ichan); +erirq: + ipu_irq_unmap(ichan->dma_chan.chan_id); +eimap: + return ret; +} + +static void idmac_free_chan_resources(struct dma_chan *chan) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + struct idmac *idmac = to_idmac(chan->device); + + mutex_lock(&ichan->chan_mutex); + + __idmac_terminate_all(chan); + + if (ichan->status > IPU_CHANNEL_FREE) { + free_irq(ichan->eof_irq, ichan); + ipu_irq_unmap(ichan->dma_chan.chan_id); + } + + ichan->status = IPU_CHANNEL_FREE; + + ipu_uninit_channel(idmac, ichan); + + mutex_unlock(&ichan->chan_mutex); + + tasklet_schedule(&to_ipu(idmac)->tasklet); +} + +static enum dma_status idmac_is_tx_complete(struct dma_chan *chan, + dma_cookie_t cookie, dma_cookie_t *done, dma_cookie_t *used) +{ + struct idmac_channel *ichan = to_idmac_chan(chan); + + if (done) + *done = ichan->completed; + if (used) + *used = chan->cookie; + if (cookie != chan->cookie) + return DMA_ERROR; + return DMA_SUCCESS; +} + +static int __init ipu_idmac_init(struct ipu *ipu) +{ + struct idmac *idmac = &ipu->idmac; + struct dma_device *dma = &idmac->dma; + int i; + + dma_cap_set(DMA_SLAVE, dma->cap_mask); + dma_cap_set(DMA_PRIVATE, dma->cap_mask); + + /* Compulsory common fields */ + dma->dev = ipu->dev; + dma->device_alloc_chan_resources = idmac_alloc_chan_resources; + dma->device_free_chan_resources = idmac_free_chan_resources; + dma->device_is_tx_complete = idmac_is_tx_complete; + dma->device_issue_pending = idmac_issue_pending; + + /* Compulsory for DMA_SLAVE fields */ + dma->device_prep_slave_sg = idmac_prep_slave_sg; + dma->device_terminate_all = idmac_terminate_all; + + INIT_LIST_HEAD(&dma->channels); + for (i = 0; i < IPU_CHANNELS_NUM; i++) { + struct idmac_channel *ichan = ipu->channel + i; + struct dma_chan *dma_chan = &ichan->dma_chan; + + spin_lock_init(&ichan->lock); + mutex_init(&ichan->chan_mutex); + + ichan->status = IPU_CHANNEL_FREE; + ichan->sec_chan_en = false; + ichan->completed = -ENXIO; + snprintf(ichan->eof_name, sizeof(ichan->eof_name), "IDMAC EOF %d", i); + + dma_chan->device = &idmac->dma; + dma_chan->cookie = 1; + dma_chan->chan_id = i; + list_add_tail(&ichan->dma_chan.device_node, &dma->channels); + } + + idmac_write_icreg(ipu, 0x00000070, IDMAC_CONF); + + return dma_async_device_register(&idmac->dma); +} + +static void ipu_idmac_exit(struct ipu *ipu) +{ + int i; + struct idmac *idmac = &ipu->idmac; + + for (i = 0; i < IPU_CHANNELS_NUM; i++) { + struct idmac_channel *ichan = ipu->channel + i; + + idmac_terminate_all(&ichan->dma_chan); + idmac_prep_slave_sg(&ichan->dma_chan, NULL, 0, DMA_NONE, 0); + } + + dma_async_device_unregister(&idmac->dma); +} + +/***************************************************************************** + * IPU common probe / remove + */ + +static int ipu_probe(struct platform_device *pdev) +{ + struct ipu_platform_data *pdata = pdev->dev.platform_data; + struct resource *mem_ipu, *mem_ic; + int ret; + + spin_lock_init(&ipu_data.lock); + + mem_ipu = platform_get_resource(pdev, IORESOURCE_MEM, 0); + mem_ic = platform_get_resource(pdev, IORESOURCE_MEM, 1); + if (!pdata || !mem_ipu || !mem_ic) + return -EINVAL; + + ipu_data.dev = &pdev->dev; + + platform_set_drvdata(pdev, &ipu_data); + + ret = platform_get_irq(pdev, 0); + if (ret < 0) + goto err_noirq; + + ipu_data.irq_fn = ret; + ret = platform_get_irq(pdev, 1); + if (ret < 0) + goto err_noirq; + + ipu_data.irq_err = ret; + ipu_data.irq_base = pdata->irq_base; + + dev_dbg(&pdev->dev, "fn irq %u, err irq %u, irq-base %u\n", + ipu_data.irq_fn, ipu_data.irq_err, ipu_data.irq_base); + + /* Remap IPU common registers */ + ipu_data.reg_ipu = ioremap(mem_ipu->start, + mem_ipu->end - mem_ipu->start + 1); + if (!ipu_data.reg_ipu) { + ret = -ENOMEM; + goto err_ioremap_ipu; + } + + /* Remap Image Converter and Image DMA Controller registers */ + ipu_data.reg_ic = ioremap(mem_ic->start, + mem_ic->end - mem_ic->start + 1); + if (!ipu_data.reg_ic) { + ret = -ENOMEM; + goto err_ioremap_ic; + } + + /* Get IPU clock */ + ipu_data.ipu_clk = clk_get(&pdev->dev, "ipu_clk"); + if (IS_ERR(ipu_data.ipu_clk)) { + ret = PTR_ERR(ipu_data.ipu_clk); + goto err_clk_get; + } + + /* Make sure IPU HSP clock is running */ + clk_enable(ipu_data.ipu_clk); + + /* Disable all interrupts */ + idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_1); + idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_2); + idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_3); + idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_4); + idmac_write_ipureg(&ipu_data, 0, IPU_INT_CTRL_5); + + dev_dbg(&pdev->dev, "%s @ 0x%08lx, fn irq %u, err irq %u\n", pdev->name, + (unsigned long)mem_ipu->start, ipu_data.irq_fn, ipu_data.irq_err); + + ret = ipu_irq_attach_irq(&ipu_data, pdev); + if (ret < 0) + goto err_attach_irq; + + /* Initialize DMA engine */ + ret = ipu_idmac_init(&ipu_data); + if (ret < 0) + goto err_idmac_init; + + tasklet_init(&ipu_data.tasklet, ipu_gc_tasklet, (unsigned long)&ipu_data); + + ipu_data.dev = &pdev->dev; + + dev_dbg(ipu_data.dev, "IPU initialized\n"); + + return 0; + +err_idmac_init: +err_attach_irq: + ipu_irq_detach_irq(&ipu_data, pdev); + clk_disable(ipu_data.ipu_clk); + clk_put(ipu_data.ipu_clk); +err_clk_get: + iounmap(ipu_data.reg_ic); +err_ioremap_ic: + iounmap(ipu_data.reg_ipu); +err_ioremap_ipu: +err_noirq: + dev_err(&pdev->dev, "Failed to probe IPU: %d\n", ret); + return ret; +} + +static int ipu_remove(struct platform_device *pdev) +{ + struct ipu *ipu = platform_get_drvdata(pdev); + + ipu_idmac_exit(ipu); + ipu_irq_detach_irq(ipu, pdev); + clk_disable(ipu->ipu_clk); + clk_put(ipu->ipu_clk); + iounmap(ipu->reg_ic); + iounmap(ipu->reg_ipu); + tasklet_kill(&ipu->tasklet); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +/* + * We need two MEM resources - with IPU-common and Image Converter registers, + * including PF_CONF and IDMAC_* registers, and two IRQs - function and error + */ +static struct platform_driver ipu_platform_driver = { + .driver = { + .name = "ipu-core", + .owner = THIS_MODULE, + }, + .remove = ipu_remove, +}; + +static int __init ipu_init(void) +{ + return platform_driver_probe(&ipu_platform_driver, ipu_probe); +} +subsys_initcall(ipu_init); + +MODULE_DESCRIPTION("IPU core driver"); +MODULE_LICENSE("GPL v2"); +MODULE_AUTHOR("Guennadi Liakhovetski <lg@denx.de>"); +MODULE_ALIAS("platform:ipu-core"); diff --git a/drivers/dma/ipu/ipu_intern.h b/drivers/dma/ipu/ipu_intern.h new file mode 100644 index 00000000000..545cf11a94a --- /dev/null +++ b/drivers/dma/ipu/ipu_intern.h @@ -0,0 +1,176 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * Copyright (C) 2005-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#ifndef _IPU_INTERN_H_ +#define _IPU_INTERN_H_ + +#include <linux/dmaengine.h> +#include <linux/platform_device.h> +#include <linux/interrupt.h> + +/* IPU Common registers */ +#define IPU_CONF 0x00 +#define IPU_CHA_BUF0_RDY 0x04 +#define IPU_CHA_BUF1_RDY 0x08 +#define IPU_CHA_DB_MODE_SEL 0x0C +#define IPU_CHA_CUR_BUF 0x10 +#define IPU_FS_PROC_FLOW 0x14 +#define IPU_FS_DISP_FLOW 0x18 +#define IPU_TASKS_STAT 0x1C +#define IPU_IMA_ADDR 0x20 +#define IPU_IMA_DATA 0x24 +#define IPU_INT_CTRL_1 0x28 +#define IPU_INT_CTRL_2 0x2C +#define IPU_INT_CTRL_3 0x30 +#define IPU_INT_CTRL_4 0x34 +#define IPU_INT_CTRL_5 0x38 +#define IPU_INT_STAT_1 0x3C +#define IPU_INT_STAT_2 0x40 +#define IPU_INT_STAT_3 0x44 +#define IPU_INT_STAT_4 0x48 +#define IPU_INT_STAT_5 0x4C +#define IPU_BRK_CTRL_1 0x50 +#define IPU_BRK_CTRL_2 0x54 +#define IPU_BRK_STAT 0x58 +#define IPU_DIAGB_CTRL 0x5C + +/* IPU_CONF Register bits */ +#define IPU_CONF_CSI_EN 0x00000001 +#define IPU_CONF_IC_EN 0x00000002 +#define IPU_CONF_ROT_EN 0x00000004 +#define IPU_CONF_PF_EN 0x00000008 +#define IPU_CONF_SDC_EN 0x00000010 +#define IPU_CONF_ADC_EN 0x00000020 +#define IPU_CONF_DI_EN 0x00000040 +#define IPU_CONF_DU_EN 0x00000080 +#define IPU_CONF_PXL_ENDIAN 0x00000100 + +/* Image Converter Registers */ +#define IC_CONF 0x88 +#define IC_PRP_ENC_RSC 0x8C +#define IC_PRP_VF_RSC 0x90 +#define IC_PP_RSC 0x94 +#define IC_CMBP_1 0x98 +#define IC_CMBP_2 0x9C +#define PF_CONF 0xA0 +#define IDMAC_CONF 0xA4 +#define IDMAC_CHA_EN 0xA8 +#define IDMAC_CHA_PRI 0xAC +#define IDMAC_CHA_BUSY 0xB0 + +/* Image Converter Register bits */ +#define IC_CONF_PRPENC_EN 0x00000001 +#define IC_CONF_PRPENC_CSC1 0x00000002 +#define IC_CONF_PRPENC_ROT_EN 0x00000004 +#define IC_CONF_PRPVF_EN 0x00000100 +#define IC_CONF_PRPVF_CSC1 0x00000200 +#define IC_CONF_PRPVF_CSC2 0x00000400 +#define IC_CONF_PRPVF_CMB 0x00000800 +#define IC_CONF_PRPVF_ROT_EN 0x00001000 +#define IC_CONF_PP_EN 0x00010000 +#define IC_CONF_PP_CSC1 0x00020000 +#define IC_CONF_PP_CSC2 0x00040000 +#define IC_CONF_PP_CMB 0x00080000 +#define IC_CONF_PP_ROT_EN 0x00100000 +#define IC_CONF_IC_GLB_LOC_A 0x10000000 +#define IC_CONF_KEY_COLOR_EN 0x20000000 +#define IC_CONF_RWS_EN 0x40000000 +#define IC_CONF_CSI_MEM_WR_EN 0x80000000 + +#define IDMA_CHAN_INVALID 0x000000FF +#define IDMA_IC_0 0x00000001 +#define IDMA_IC_1 0x00000002 +#define IDMA_IC_2 0x00000004 +#define IDMA_IC_3 0x00000008 +#define IDMA_IC_4 0x00000010 +#define IDMA_IC_5 0x00000020 +#define IDMA_IC_6 0x00000040 +#define IDMA_IC_7 0x00000080 +#define IDMA_IC_8 0x00000100 +#define IDMA_IC_9 0x00000200 +#define IDMA_IC_10 0x00000400 +#define IDMA_IC_11 0x00000800 +#define IDMA_IC_12 0x00001000 +#define IDMA_IC_13 0x00002000 +#define IDMA_SDC_BG 0x00004000 +#define IDMA_SDC_FG 0x00008000 +#define IDMA_SDC_MASK 0x00010000 +#define IDMA_SDC_PARTIAL 0x00020000 +#define IDMA_ADC_SYS1_WR 0x00040000 +#define IDMA_ADC_SYS2_WR 0x00080000 +#define IDMA_ADC_SYS1_CMD 0x00100000 +#define IDMA_ADC_SYS2_CMD 0x00200000 +#define IDMA_ADC_SYS1_RD 0x00400000 +#define IDMA_ADC_SYS2_RD 0x00800000 +#define IDMA_PF_QP 0x01000000 +#define IDMA_PF_BSP 0x02000000 +#define IDMA_PF_Y_IN 0x04000000 +#define IDMA_PF_U_IN 0x08000000 +#define IDMA_PF_V_IN 0x10000000 +#define IDMA_PF_Y_OUT 0x20000000 +#define IDMA_PF_U_OUT 0x40000000 +#define IDMA_PF_V_OUT 0x80000000 + +#define TSTAT_PF_H264_PAUSE 0x00000001 +#define TSTAT_CSI2MEM_MASK 0x0000000C +#define TSTAT_CSI2MEM_OFFSET 2 +#define TSTAT_VF_MASK 0x00000600 +#define TSTAT_VF_OFFSET 9 +#define TSTAT_VF_ROT_MASK 0x000C0000 +#define TSTAT_VF_ROT_OFFSET 18 +#define TSTAT_ENC_MASK 0x00000180 +#define TSTAT_ENC_OFFSET 7 +#define TSTAT_ENC_ROT_MASK 0x00030000 +#define TSTAT_ENC_ROT_OFFSET 16 +#define TSTAT_PP_MASK 0x00001800 +#define TSTAT_PP_OFFSET 11 +#define TSTAT_PP_ROT_MASK 0x00300000 +#define TSTAT_PP_ROT_OFFSET 20 +#define TSTAT_PF_MASK 0x00C00000 +#define TSTAT_PF_OFFSET 22 +#define TSTAT_ADCSYS1_MASK 0x03000000 +#define TSTAT_ADCSYS1_OFFSET 24 +#define TSTAT_ADCSYS2_MASK 0x0C000000 +#define TSTAT_ADCSYS2_OFFSET 26 + +#define TASK_STAT_IDLE 0 +#define TASK_STAT_ACTIVE 1 +#define TASK_STAT_WAIT4READY 2 + +struct idmac { + struct dma_device dma; +}; + +struct ipu { + void __iomem *reg_ipu; + void __iomem *reg_ic; + unsigned int irq_fn; /* IPU Function IRQ to the CPU */ + unsigned int irq_err; /* IPU Error IRQ to the CPU */ + unsigned int irq_base; /* Beginning of the IPU IRQ range */ + unsigned long channel_init_mask; + spinlock_t lock; + struct clk *ipu_clk; + struct device *dev; + struct idmac idmac; + struct idmac_channel channel[IPU_CHANNELS_NUM]; + struct tasklet_struct tasklet; +}; + +#define to_idmac(d) container_of(d, struct idmac, dma) + +extern int ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev); +extern void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev); + +extern bool ipu_irq_status(uint32_t irq); +extern int ipu_irq_map(unsigned int source); +extern int ipu_irq_unmap(unsigned int source); + +#endif diff --git a/drivers/dma/ipu/ipu_irq.c b/drivers/dma/ipu/ipu_irq.c new file mode 100644 index 00000000000..83f532cc767 --- /dev/null +++ b/drivers/dma/ipu/ipu_irq.c @@ -0,0 +1,413 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/init.h> +#include <linux/err.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/clk.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <mach/ipu.h> + +#include "ipu_intern.h" + +/* + * Register read / write - shall be inlined by the compiler + */ +static u32 ipu_read_reg(struct ipu *ipu, unsigned long reg) +{ + return __raw_readl(ipu->reg_ipu + reg); +} + +static void ipu_write_reg(struct ipu *ipu, u32 value, unsigned long reg) +{ + __raw_writel(value, ipu->reg_ipu + reg); +} + + +/* + * IPU IRQ chip driver + */ + +#define IPU_IRQ_NR_FN_BANKS 3 +#define IPU_IRQ_NR_ERR_BANKS 2 +#define IPU_IRQ_NR_BANKS (IPU_IRQ_NR_FN_BANKS + IPU_IRQ_NR_ERR_BANKS) + +struct ipu_irq_bank { + unsigned int control; + unsigned int status; + spinlock_t lock; + struct ipu *ipu; +}; + +static struct ipu_irq_bank irq_bank[IPU_IRQ_NR_BANKS] = { + /* 3 groups of functional interrupts */ + { + .control = IPU_INT_CTRL_1, + .status = IPU_INT_STAT_1, + }, { + .control = IPU_INT_CTRL_2, + .status = IPU_INT_STAT_2, + }, { + .control = IPU_INT_CTRL_3, + .status = IPU_INT_STAT_3, + }, + /* 2 groups of error interrupts */ + { + .control = IPU_INT_CTRL_4, + .status = IPU_INT_STAT_4, + }, { + .control = IPU_INT_CTRL_5, + .status = IPU_INT_STAT_5, + }, +}; + +struct ipu_irq_map { + unsigned int irq; + int source; + struct ipu_irq_bank *bank; + struct ipu *ipu; +}; + +static struct ipu_irq_map irq_map[CONFIG_MX3_IPU_IRQS]; +/* Protects allocations from the above array of maps */ +static DEFINE_MUTEX(map_lock); +/* Protects register accesses and individual mappings */ +static DEFINE_SPINLOCK(bank_lock); + +static struct ipu_irq_map *src2map(unsigned int src) +{ + int i; + + for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) + if (irq_map[i].source == src) + return irq_map + i; + + return NULL; +} + +static void ipu_irq_unmask(unsigned int irq) +{ + struct ipu_irq_map *map = get_irq_chip_data(irq); + struct ipu_irq_bank *bank; + uint32_t reg; + unsigned long lock_flags; + + spin_lock_irqsave(&bank_lock, lock_flags); + + bank = map->bank; + if (!bank) { + spin_unlock_irqrestore(&bank_lock, lock_flags); + pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq); + return; + } + + reg = ipu_read_reg(bank->ipu, bank->control); + reg |= (1UL << (map->source & 31)); + ipu_write_reg(bank->ipu, reg, bank->control); + + spin_unlock_irqrestore(&bank_lock, lock_flags); +} + +static void ipu_irq_mask(unsigned int irq) +{ + struct ipu_irq_map *map = get_irq_chip_data(irq); + struct ipu_irq_bank *bank; + uint32_t reg; + unsigned long lock_flags; + + spin_lock_irqsave(&bank_lock, lock_flags); + + bank = map->bank; + if (!bank) { + spin_unlock_irqrestore(&bank_lock, lock_flags); + pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq); + return; + } + + reg = ipu_read_reg(bank->ipu, bank->control); + reg &= ~(1UL << (map->source & 31)); + ipu_write_reg(bank->ipu, reg, bank->control); + + spin_unlock_irqrestore(&bank_lock, lock_flags); +} + +static void ipu_irq_ack(unsigned int irq) +{ + struct ipu_irq_map *map = get_irq_chip_data(irq); + struct ipu_irq_bank *bank; + unsigned long lock_flags; + + spin_lock_irqsave(&bank_lock, lock_flags); + + bank = map->bank; + if (!bank) { + spin_unlock_irqrestore(&bank_lock, lock_flags); + pr_err("IPU: %s(%u) - unmapped!\n", __func__, irq); + return; + } + + ipu_write_reg(bank->ipu, 1UL << (map->source & 31), bank->status); + spin_unlock_irqrestore(&bank_lock, lock_flags); +} + +/** + * ipu_irq_status() - returns the current interrupt status of the specified IRQ. + * @irq: interrupt line to get status for. + * @return: true if the interrupt is pending/asserted or false if the + * interrupt is not pending. + */ +bool ipu_irq_status(unsigned int irq) +{ + struct ipu_irq_map *map = get_irq_chip_data(irq); + struct ipu_irq_bank *bank; + unsigned long lock_flags; + bool ret; + + spin_lock_irqsave(&bank_lock, lock_flags); + bank = map->bank; + ret = bank && ipu_read_reg(bank->ipu, bank->status) & + (1UL << (map->source & 31)); + spin_unlock_irqrestore(&bank_lock, lock_flags); + + return ret; +} + +/** + * ipu_irq_map() - map an IPU interrupt source to an IRQ number + * @source: interrupt source bit position (see below) + * @return: mapped IRQ number or negative error code + * + * The source parameter has to be explained further. On i.MX31 IPU has 137 IRQ + * sources, they are broken down in 5 32-bit registers, like 32, 32, 24, 32, 17. + * However, the source argument of this function is not the sequence number of + * the possible IRQ, but rather its bit position. So, first interrupt in fourth + * register has source number 96, and not 88. This makes calculations easier, + * and also provides forward compatibility with any future IPU implementations + * with any interrupt bit assignments. + */ +int ipu_irq_map(unsigned int source) +{ + int i, ret = -ENOMEM; + struct ipu_irq_map *map; + + might_sleep(); + + mutex_lock(&map_lock); + map = src2map(source); + if (map) { + pr_err("IPU: Source %u already mapped to IRQ %u\n", source, map->irq); + ret = -EBUSY; + goto out; + } + + for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) { + if (irq_map[i].source < 0) { + unsigned long lock_flags; + + spin_lock_irqsave(&bank_lock, lock_flags); + irq_map[i].source = source; + irq_map[i].bank = irq_bank + source / 32; + spin_unlock_irqrestore(&bank_lock, lock_flags); + + ret = irq_map[i].irq; + pr_debug("IPU: mapped source %u to IRQ %u\n", + source, ret); + break; + } + } +out: + mutex_unlock(&map_lock); + + if (ret < 0) + pr_err("IPU: couldn't map source %u: %d\n", source, ret); + + return ret; +} + +/** + * ipu_irq_map() - map an IPU interrupt source to an IRQ number + * @source: interrupt source bit position (see ipu_irq_map()) + * @return: 0 or negative error code + */ +int ipu_irq_unmap(unsigned int source) +{ + int i, ret = -EINVAL; + + might_sleep(); + + mutex_lock(&map_lock); + for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) { + if (irq_map[i].source == source) { + unsigned long lock_flags; + + pr_debug("IPU: unmapped source %u from IRQ %u\n", + source, irq_map[i].irq); + + spin_lock_irqsave(&bank_lock, lock_flags); + irq_map[i].source = -EINVAL; + irq_map[i].bank = NULL; + spin_unlock_irqrestore(&bank_lock, lock_flags); + + ret = 0; + break; + } + } + mutex_unlock(&map_lock); + + return ret; +} + +/* Chained IRQ handler for IPU error interrupt */ +static void ipu_irq_err(unsigned int irq, struct irq_desc *desc) +{ + struct ipu *ipu = get_irq_data(irq); + u32 status; + int i, line; + + for (i = IPU_IRQ_NR_FN_BANKS; i < IPU_IRQ_NR_BANKS; i++) { + struct ipu_irq_bank *bank = irq_bank + i; + + spin_lock(&bank_lock); + status = ipu_read_reg(ipu, bank->status); + /* + * Don't think we have to clear all interrupts here, they will + * be acked by ->handle_irq() (handle_level_irq). However, we + * might want to clear unhandled interrupts after the loop... + */ + status &= ipu_read_reg(ipu, bank->control); + spin_unlock(&bank_lock); + while ((line = ffs(status))) { + struct ipu_irq_map *map; + + line--; + status &= ~(1UL << line); + + spin_lock(&bank_lock); + map = src2map(32 * i + line); + if (map) + irq = map->irq; + spin_unlock(&bank_lock); + + if (!map) { + pr_err("IPU: Interrupt on unmapped source %u bank %d\n", + line, i); + continue; + } + generic_handle_irq(irq); + } + } +} + +/* Chained IRQ handler for IPU function interrupt */ +static void ipu_irq_fn(unsigned int irq, struct irq_desc *desc) +{ + struct ipu *ipu = get_irq_data(irq); + u32 status; + int i, line; + + for (i = 0; i < IPU_IRQ_NR_FN_BANKS; i++) { + struct ipu_irq_bank *bank = irq_bank + i; + + spin_lock(&bank_lock); + status = ipu_read_reg(ipu, bank->status); + /* Not clearing all interrupts, see above */ + status &= ipu_read_reg(ipu, bank->control); + spin_unlock(&bank_lock); + while ((line = ffs(status))) { + struct ipu_irq_map *map; + + line--; + status &= ~(1UL << line); + + spin_lock(&bank_lock); + map = src2map(32 * i + line); + if (map) + irq = map->irq; + spin_unlock(&bank_lock); + + if (!map) { + pr_err("IPU: Interrupt on unmapped source %u bank %d\n", + line, i); + continue; + } + generic_handle_irq(irq); + } + } +} + +static struct irq_chip ipu_irq_chip = { + .name = "ipu_irq", + .ack = ipu_irq_ack, + .mask = ipu_irq_mask, + .unmask = ipu_irq_unmask, +}; + +/* Install the IRQ handler */ +int ipu_irq_attach_irq(struct ipu *ipu, struct platform_device *dev) +{ + struct ipu_platform_data *pdata = dev->dev.platform_data; + unsigned int irq, irq_base, i; + + irq_base = pdata->irq_base; + + for (i = 0; i < IPU_IRQ_NR_BANKS; i++) + irq_bank[i].ipu = ipu; + + for (i = 0; i < CONFIG_MX3_IPU_IRQS; i++) { + int ret; + + irq = irq_base + i; + ret = set_irq_chip(irq, &ipu_irq_chip); + if (ret < 0) + return ret; + ret = set_irq_chip_data(irq, irq_map + i); + if (ret < 0) + return ret; + irq_map[i].ipu = ipu; + irq_map[i].irq = irq; + irq_map[i].source = -EINVAL; + set_irq_handler(irq, handle_level_irq); +#ifdef CONFIG_ARM + set_irq_flags(irq, IRQF_VALID | IRQF_PROBE); +#endif + } + + set_irq_data(ipu->irq_fn, ipu); + set_irq_chained_handler(ipu->irq_fn, ipu_irq_fn); + + set_irq_data(ipu->irq_err, ipu); + set_irq_chained_handler(ipu->irq_err, ipu_irq_err); + + return 0; +} + +void ipu_irq_detach_irq(struct ipu *ipu, struct platform_device *dev) +{ + struct ipu_platform_data *pdata = dev->dev.platform_data; + unsigned int irq, irq_base; + + irq_base = pdata->irq_base; + + set_irq_chained_handler(ipu->irq_fn, NULL); + set_irq_data(ipu->irq_fn, NULL); + + set_irq_chained_handler(ipu->irq_err, NULL); + set_irq_data(ipu->irq_err, NULL); + + for (irq = irq_base; irq < irq_base + CONFIG_MX3_IPU_IRQS; irq++) { +#ifdef CONFIG_ARM + set_irq_flags(irq, 0); +#endif + set_irq_chip(irq, NULL); + set_irq_chip_data(irq, NULL); + } +} diff --git a/drivers/edac/cell_edac.c b/drivers/edac/cell_edac.c index cd2e3b8087e..24f3ca85152 100644 --- a/drivers/edac/cell_edac.c +++ b/drivers/edac/cell_edac.c @@ -36,7 +36,7 @@ static void cell_edac_count_ce(struct mem_ctl_info *mci, int chan, u64 ar) struct csrow_info *csrow = &mci->csrows[0]; unsigned long address, pfn, offset, syndrome; - dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016lx\n", + dev_dbg(mci->dev, "ECC CE err on node %d, channel %d, ar = 0x%016llx\n", priv->node, chan, ar); /* Address decoding is likely a bit bogus, to dbl check */ @@ -58,7 +58,7 @@ static void cell_edac_count_ue(struct mem_ctl_info *mci, int chan, u64 ar) struct csrow_info *csrow = &mci->csrows[0]; unsigned long address, pfn, offset; - dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016lx\n", + dev_dbg(mci->dev, "ECC UE err on node %d, channel %d, ar = 0x%016llx\n", priv->node, chan, ar); /* Address decoding is likely a bit bogus, to dbl check */ @@ -169,7 +169,7 @@ static int __devinit cell_edac_probe(struct platform_device *pdev) /* Get channel population */ reg = in_be64(®s->mic_mnt_cfg); - dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016lx\n", reg); + dev_dbg(&pdev->dev, "MIC_MNT_CFG = 0x%016llx\n", reg); chanmask = 0; if (reg & CBE_MIC_MNT_CFG_CHAN_0_POP) chanmask |= 0x1; @@ -180,7 +180,7 @@ static int __devinit cell_edac_probe(struct platform_device *pdev) "Yuck ! No channel populated ? Aborting !\n"); return -ENODEV; } - dev_dbg(&pdev->dev, "Initial FIR = 0x%016lx\n", + dev_dbg(&pdev->dev, "Initial FIR = 0x%016llx\n", in_be64(®s->mic_fir)); /* Allocate & init EDAC MC data structure */ diff --git a/drivers/firmware/dcdbas.c b/drivers/firmware/dcdbas.c index 777fba48d2d..3009e0171e5 100644 --- a/drivers/firmware/dcdbas.c +++ b/drivers/firmware/dcdbas.c @@ -244,7 +244,7 @@ static ssize_t host_control_on_shutdown_store(struct device *dev, */ int dcdbas_smi_request(struct smi_cmd *smi_cmd) { - cpumask_t old_mask; + cpumask_var_t old_mask; int ret = 0; if (smi_cmd->magic != SMI_CMD_MAGIC) { @@ -254,8 +254,11 @@ int dcdbas_smi_request(struct smi_cmd *smi_cmd) } /* SMI requires CPU 0 */ - old_mask = current->cpus_allowed; - set_cpus_allowed_ptr(current, &cpumask_of_cpu(0)); + if (!alloc_cpumask_var(&old_mask, GFP_KERNEL)) + return -ENOMEM; + + cpumask_copy(old_mask, ¤t->cpus_allowed); + set_cpus_allowed_ptr(current, cpumask_of(0)); if (smp_processor_id() != 0) { dev_dbg(&dcdbas_pdev->dev, "%s: failed to get CPU 0\n", __func__); @@ -275,7 +278,8 @@ int dcdbas_smi_request(struct smi_cmd *smi_cmd) ); out: - set_cpus_allowed_ptr(current, &old_mask); + set_cpus_allowed_ptr(current, old_mask); + free_cpumask_var(old_mask); return ret; } diff --git a/drivers/firmware/dmi_scan.c b/drivers/firmware/dmi_scan.c index d76adfea5df..8f0f7c44930 100644 --- a/drivers/firmware/dmi_scan.c +++ b/drivers/firmware/dmi_scan.c @@ -415,6 +415,29 @@ void __init dmi_scan_machine(void) } /** + * dmi_matches - check if dmi_system_id structure matches system DMI data + * @dmi: pointer to the dmi_system_id structure to check + */ +static bool dmi_matches(const struct dmi_system_id *dmi) +{ + int i; + + WARN(!dmi_initialized, KERN_ERR "dmi check: not initialized yet.\n"); + + for (i = 0; i < ARRAY_SIZE(dmi->matches); i++) { + int s = dmi->matches[i].slot; + if (s == DMI_NONE) + continue; + if (dmi_ident[s] + && strstr(dmi_ident[s], dmi->matches[i].substr)) + continue; + /* No match */ + return false; + } + return true; +} + +/** * dmi_check_system - check system DMI data * @list: array of dmi_system_id structures to match against * All non-null elements of the list must match @@ -429,32 +452,45 @@ void __init dmi_scan_machine(void) */ int dmi_check_system(const struct dmi_system_id *list) { - int i, count = 0; - const struct dmi_system_id *d = list; - - WARN(!dmi_initialized, KERN_ERR "dmi check: not initialized yet.\n"); - - while (d->ident) { - for (i = 0; i < ARRAY_SIZE(d->matches); i++) { - int s = d->matches[i].slot; - if (s == DMI_NONE) - continue; - if (dmi_ident[s] && strstr(dmi_ident[s], d->matches[i].substr)) - continue; - /* No match */ - goto fail; + int count = 0; + const struct dmi_system_id *d; + + for (d = list; d->ident; d++) + if (dmi_matches(d)) { + count++; + if (d->callback && d->callback(d)) + break; } - count++; - if (d->callback && d->callback(d)) - break; -fail: d++; - } return count; } EXPORT_SYMBOL(dmi_check_system); /** + * dmi_first_match - find dmi_system_id structure matching system DMI data + * @list: array of dmi_system_id structures to match against + * All non-null elements of the list must match + * their slot's (field index's) data (i.e., each + * list string must be a substring of the specified + * DMI slot's string data) to be considered a + * successful match. + * + * Walk the blacklist table until the first match is found. Return the + * pointer to the matching entry or NULL if there's no match. + */ +const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list) +{ + const struct dmi_system_id *d; + + for (d = list; d->ident; d++) + if (dmi_matches(d)) + return d; + + return NULL; +} +EXPORT_SYMBOL(dmi_first_match); + +/** * dmi_get_system_info - return DMI data value * @field: data index (see enum dmi_field) * diff --git a/drivers/gpu/drm/drm_agpsupport.c b/drivers/gpu/drm/drm_agpsupport.c index 3d33b8252b5..14796594e5d 100644 --- a/drivers/gpu/drm/drm_agpsupport.c +++ b/drivers/gpu/drm/drm_agpsupport.c @@ -33,10 +33,11 @@ #include "drmP.h" #include <linux/module.h> -#include <asm/agp.h> #if __OS_HAS_AGP +#include <asm/agp.h> + /** * Get AGP information. * diff --git a/drivers/gpu/drm/drm_crtc.c b/drivers/gpu/drm/drm_crtc.c index 5b2cbb77816..bfce0992fef 100644 --- a/drivers/gpu/drm/drm_crtc.c +++ b/drivers/gpu/drm/drm_crtc.c @@ -194,7 +194,6 @@ char *drm_get_connector_status_name(enum drm_connector_status status) * @type: object type * * LOCKING: - * Caller must hold DRM mode_config lock. * * Create a unique identifier based on @ptr in @dev's identifier space. Used * for tracking modes, CRTCs and connectors. @@ -209,15 +208,15 @@ static int drm_mode_object_get(struct drm_device *dev, int new_id = 0; int ret; - WARN(!mutex_is_locked(&dev->mode_config.mutex), - "%s called w/o mode_config lock\n", __func__); again: if (idr_pre_get(&dev->mode_config.crtc_idr, GFP_KERNEL) == 0) { DRM_ERROR("Ran out memory getting a mode number\n"); return -EINVAL; } + mutex_lock(&dev->mode_config.idr_mutex); ret = idr_get_new_above(&dev->mode_config.crtc_idr, obj, 1, &new_id); + mutex_unlock(&dev->mode_config.idr_mutex); if (ret == -EAGAIN) goto again; @@ -239,16 +238,20 @@ again: static void drm_mode_object_put(struct drm_device *dev, struct drm_mode_object *object) { + mutex_lock(&dev->mode_config.idr_mutex); idr_remove(&dev->mode_config.crtc_idr, object->id); + mutex_unlock(&dev->mode_config.idr_mutex); } void *drm_mode_object_find(struct drm_device *dev, uint32_t id, uint32_t type) { - struct drm_mode_object *obj; + struct drm_mode_object *obj = NULL; + mutex_lock(&dev->mode_config.idr_mutex); obj = idr_find(&dev->mode_config.crtc_idr, id); if (!obj || (obj->type != type) || (obj->id != id)) - return NULL; + obj = NULL; + mutex_unlock(&dev->mode_config.idr_mutex); return obj; } @@ -786,6 +789,7 @@ EXPORT_SYMBOL(drm_mode_create_dithering_property); void drm_mode_config_init(struct drm_device *dev) { mutex_init(&dev->mode_config.mutex); + mutex_init(&dev->mode_config.idr_mutex); INIT_LIST_HEAD(&dev->mode_config.fb_list); INIT_LIST_HEAD(&dev->mode_config.fb_kernel_list); INIT_LIST_HEAD(&dev->mode_config.crtc_list); diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index 5ff88d95222..14c7a23dc15 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -294,6 +294,7 @@ EXPORT_SYMBOL(drm_init); */ static void drm_cleanup(struct drm_device * dev) { + struct drm_map_list *r_list, *list_temp; DRM_DEBUG("\n"); if (!dev) { @@ -325,6 +326,9 @@ static void drm_cleanup(struct drm_device * dev) drm_ht_remove(&dev->map_hash); drm_ctxbitmap_cleanup(dev); + list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head) + drm_rmmap(dev, r_list->map); + if (drm_core_check_feature(dev, DRIVER_MODESET)) drm_put_minor(&dev->control); diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c index 0fbb0da342c..5a4d3244758 100644 --- a/drivers/gpu/drm/drm_edid.c +++ b/drivers/gpu/drm/drm_edid.c @@ -660,7 +660,7 @@ struct edid *drm_get_edid(struct drm_connector *connector, edid = (struct edid *)drm_ddc_read(adapter); if (!edid) { - dev_warn(&connector->dev->pdev->dev, "%s: no EDID data\n", + dev_info(&connector->dev->pdev->dev, "%s: no EDID data\n", drm_get_connector_name(connector)); return NULL; } diff --git a/drivers/gpu/drm/drm_irq.c b/drivers/gpu/drm/drm_irq.c index 477caa1b1e4..69aa0ab2840 100644 --- a/drivers/gpu/drm/drm_irq.c +++ b/drivers/gpu/drm/drm_irq.c @@ -106,8 +106,6 @@ void drm_vblank_cleanup(struct drm_device *dev) drm_free(dev->vbl_queue, sizeof(*dev->vbl_queue) * dev->num_crtcs, DRM_MEM_DRIVER); - drm_free(dev->vbl_sigs, sizeof(*dev->vbl_sigs) * dev->num_crtcs, - DRM_MEM_DRIVER); drm_free(dev->_vblank_count, sizeof(*dev->_vblank_count) * dev->num_crtcs, DRM_MEM_DRIVER); drm_free(dev->vblank_refcount, sizeof(*dev->vblank_refcount) * @@ -132,7 +130,6 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs) setup_timer(&dev->vblank_disable_timer, vblank_disable_fn, (unsigned long)dev); spin_lock_init(&dev->vbl_lock); - atomic_set(&dev->vbl_signal_pending, 0); dev->num_crtcs = num_crtcs; dev->vbl_queue = drm_alloc(sizeof(wait_queue_head_t) * num_crtcs, @@ -140,11 +137,6 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs) if (!dev->vbl_queue) goto err; - dev->vbl_sigs = drm_alloc(sizeof(struct list_head) * num_crtcs, - DRM_MEM_DRIVER); - if (!dev->vbl_sigs) - goto err; - dev->_vblank_count = drm_alloc(sizeof(atomic_t) * num_crtcs, DRM_MEM_DRIVER); if (!dev->_vblank_count) @@ -177,7 +169,6 @@ int drm_vblank_init(struct drm_device *dev, int num_crtcs) /* Zero per-crtc vblank stuff */ for (i = 0; i < num_crtcs; i++) { init_waitqueue_head(&dev->vbl_queue[i]); - INIT_LIST_HEAD(&dev->vbl_sigs[i]); atomic_set(&dev->_vblank_count[i], 0); atomic_set(&dev->vblank_refcount[i], 0); } @@ -540,15 +531,10 @@ out: * \param data user argument, pointing to a drm_wait_vblank structure. * \return zero on success or a negative number on failure. * - * Verifies the IRQ is installed. - * - * If a signal is requested checks if this task has already scheduled the same signal - * for the same vblank sequence number - nothing to be done in - * that case. If the number of tasks waiting for the interrupt exceeds 100 the - * function fails. Otherwise adds a new entry to drm_device::vbl_sigs for this - * task. - * - * If a signal is not requested, then calls vblank_wait(). + * This function enables the vblank interrupt on the pipe requested, then + * sleeps waiting for the requested sequence number to occur, and drops + * the vblank interrupt refcount afterwards. (vblank irq disable follows that + * after a timeout with no further vblank waits scheduled). */ int drm_wait_vblank(struct drm_device *dev, void *data, struct drm_file *file_priv) @@ -560,6 +546,9 @@ int drm_wait_vblank(struct drm_device *dev, void *data, if ((!dev->pdev->irq) || (!dev->irq_enabled)) return -EINVAL; + if (vblwait->request.type & _DRM_VBLANK_SIGNAL) + return -EINVAL; + if (vblwait->request.type & ~(_DRM_VBLANK_TYPES_MASK | _DRM_VBLANK_FLAGS_MASK)) { DRM_ERROR("Unsupported type value 0x%x, supported mask 0x%x\n", @@ -597,89 +586,26 @@ int drm_wait_vblank(struct drm_device *dev, void *data, vblwait->request.sequence = seq + 1; } - if (flags & _DRM_VBLANK_SIGNAL) { - unsigned long irqflags; - struct list_head *vbl_sigs = &dev->vbl_sigs[crtc]; - struct drm_vbl_sig *vbl_sig; - - spin_lock_irqsave(&dev->vbl_lock, irqflags); - - /* Check if this task has already scheduled the same signal - * for the same vblank sequence number; nothing to be done in - * that case - */ - list_for_each_entry(vbl_sig, vbl_sigs, head) { - if (vbl_sig->sequence == vblwait->request.sequence - && vbl_sig->info.si_signo == - vblwait->request.signal - && vbl_sig->task == current) { - spin_unlock_irqrestore(&dev->vbl_lock, - irqflags); - vblwait->reply.sequence = seq; - goto done; - } - } - - if (atomic_read(&dev->vbl_signal_pending) >= 100) { - spin_unlock_irqrestore(&dev->vbl_lock, irqflags); - ret = -EBUSY; - goto done; - } - - spin_unlock_irqrestore(&dev->vbl_lock, irqflags); - - vbl_sig = drm_calloc(1, sizeof(struct drm_vbl_sig), - DRM_MEM_DRIVER); - if (!vbl_sig) { - ret = -ENOMEM; - goto done; - } - - /* Get a refcount on the vblank, which will be released by - * drm_vbl_send_signals(). - */ - ret = drm_vblank_get(dev, crtc); - if (ret) { - drm_free(vbl_sig, sizeof(struct drm_vbl_sig), - DRM_MEM_DRIVER); - goto done; - } - - atomic_inc(&dev->vbl_signal_pending); - - vbl_sig->sequence = vblwait->request.sequence; - vbl_sig->info.si_signo = vblwait->request.signal; - vbl_sig->task = current; + DRM_DEBUG("waiting on vblank count %d, crtc %d\n", + vblwait->request.sequence, crtc); + dev->last_vblank_wait[crtc] = vblwait->request.sequence; + DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ, + (((drm_vblank_count(dev, crtc) - + vblwait->request.sequence) <= (1 << 23)) || + !dev->irq_enabled)); - spin_lock_irqsave(&dev->vbl_lock, irqflags); - - list_add_tail(&vbl_sig->head, vbl_sigs); + if (ret != -EINTR) { + struct timeval now; - spin_unlock_irqrestore(&dev->vbl_lock, irqflags); + do_gettimeofday(&now); - vblwait->reply.sequence = seq; + vblwait->reply.tval_sec = now.tv_sec; + vblwait->reply.tval_usec = now.tv_usec; + vblwait->reply.sequence = drm_vblank_count(dev, crtc); + DRM_DEBUG("returning %d to client\n", + vblwait->reply.sequence); } else { - DRM_DEBUG("waiting on vblank count %d, crtc %d\n", - vblwait->request.sequence, crtc); - dev->last_vblank_wait[crtc] = vblwait->request.sequence; - DRM_WAIT_ON(ret, dev->vbl_queue[crtc], 3 * DRM_HZ, - (((drm_vblank_count(dev, crtc) - - vblwait->request.sequence) <= (1 << 23)) || - !dev->irq_enabled)); - - if (ret != -EINTR) { - struct timeval now; - - do_gettimeofday(&now); - - vblwait->reply.tval_sec = now.tv_sec; - vblwait->reply.tval_usec = now.tv_usec; - vblwait->reply.sequence = drm_vblank_count(dev, crtc); - DRM_DEBUG("returning %d to client\n", - vblwait->reply.sequence); - } else { - DRM_DEBUG("vblank wait interrupted by signal\n"); - } + DRM_DEBUG("vblank wait interrupted by signal\n"); } done: @@ -688,46 +614,6 @@ done: } /** - * Send the VBLANK signals. - * - * \param dev DRM device. - * \param crtc CRTC where the vblank event occurred - * - * Sends a signal for each task in drm_device::vbl_sigs and empties the list. - * - * If a signal is not requested, then calls vblank_wait(). - */ -static void drm_vbl_send_signals(struct drm_device *dev, int crtc) -{ - struct drm_vbl_sig *vbl_sig, *tmp; - struct list_head *vbl_sigs; - unsigned int vbl_seq; - unsigned long flags; - - spin_lock_irqsave(&dev->vbl_lock, flags); - - vbl_sigs = &dev->vbl_sigs[crtc]; - vbl_seq = drm_vblank_count(dev, crtc); - - list_for_each_entry_safe(vbl_sig, tmp, vbl_sigs, head) { - if ((vbl_seq - vbl_sig->sequence) <= (1 << 23)) { - vbl_sig->info.si_code = vbl_seq; - send_sig_info(vbl_sig->info.si_signo, - &vbl_sig->info, vbl_sig->task); - - list_del(&vbl_sig->head); - - drm_free(vbl_sig, sizeof(*vbl_sig), - DRM_MEM_DRIVER); - atomic_dec(&dev->vbl_signal_pending); - drm_vblank_put(dev, crtc); - } - } - - spin_unlock_irqrestore(&dev->vbl_lock, flags); -} - -/** * drm_handle_vblank - handle a vblank event * @dev: DRM device * @crtc: where this event occurred @@ -739,6 +625,5 @@ void drm_handle_vblank(struct drm_device *dev, int crtc) { atomic_inc(&dev->_vblank_count[crtc]); DRM_WAKEUP(&dev->vbl_queue[crtc]); - drm_vbl_send_signals(dev, crtc); } EXPORT_SYMBOL(drm_handle_vblank); diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c index 5ca132afa4f..46bb923b097 100644 --- a/drivers/gpu/drm/drm_stub.c +++ b/drivers/gpu/drm/drm_stub.c @@ -118,12 +118,20 @@ static void drm_master_destroy(struct kref *kref) struct drm_master *master = container_of(kref, struct drm_master, refcount); struct drm_magic_entry *pt, *next; struct drm_device *dev = master->minor->dev; + struct drm_map_list *r_list, *list_temp; list_del(&master->head); if (dev->driver->master_destroy) dev->driver->master_destroy(dev, master); + list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head) { + if (r_list->master == master) { + drm_rmmap_locked(dev, r_list->map); + r_list = NULL; + } + } + if (master->unique) { drm_free(master->unique, master->unique_size, DRM_MEM_DRIVER); master->unique = NULL; diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index bbadf1c0414..ee64b7301f6 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -944,13 +944,14 @@ static int i915_load_modeset_init(struct drm_device *dev) dev->mode_config.fb_base = drm_get_resource_start(dev, fb_bar) & 0xff000000; - DRM_DEBUG("*** fb base 0x%08lx\n", dev->mode_config.fb_base); - - if (IS_MOBILE(dev) || (IS_I9XX(dev) && !IS_I965G(dev) && !IS_G33(dev))) + if (IS_MOBILE(dev) || IS_I9XX(dev)) dev_priv->cursor_needs_physical = true; else dev_priv->cursor_needs_physical = false; + if (IS_I965G(dev) || IS_G33(dev)) + dev_priv->cursor_needs_physical = false; + ret = i915_probe_agp(dev, &agp_size, &prealloc_size); if (ret) goto kfree_devname; diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c index 96316fd4723..debad5c04cc 100644 --- a/drivers/gpu/drm/i915/i915_gem.c +++ b/drivers/gpu/drm/i915/i915_gem.c @@ -3364,7 +3364,7 @@ void i915_gem_free_all_phys_object(struct drm_device *dev) { int i; - for (i = 0; i < I915_MAX_PHYS_OBJECT; i++) + for (i = I915_GEM_PHYS_CURSOR_0; i <= I915_MAX_PHYS_OBJECT; i++) i915_gem_free_phys_object(dev, i); } @@ -3427,7 +3427,7 @@ i915_gem_attach_phys_object(struct drm_device *dev, ret = i915_gem_init_phys_object(dev, id, obj->size); if (ret) { - DRM_ERROR("failed to init phys object %d size: %d\n", id, obj->size); + DRM_ERROR("failed to init phys object %d size: %zu\n", id, obj->size); goto out; } } diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c index a5a2f5339e9..5ee9d4c2575 100644 --- a/drivers/gpu/drm/i915/intel_i2c.c +++ b/drivers/gpu/drm/i915/intel_i2c.c @@ -137,10 +137,6 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg, chan->reg = reg; snprintf(chan->adapter.name, I2C_NAME_SIZE, "intel drm %s", name); chan->adapter.owner = THIS_MODULE; -#ifndef I2C_HW_B_INTELFB -#define I2C_HW_B_INTELFB I2C_HW_B_I810 -#endif - chan->adapter.id = I2C_HW_B_INTELFB; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &dev->pdev->dev; chan->algo.setsda = set_data; diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c index 2fafdcc108f..6b1148fc2cb 100644 --- a/drivers/gpu/drm/i915/intel_lvds.c +++ b/drivers/gpu/drm/i915/intel_lvds.c @@ -340,6 +340,18 @@ static void intel_lvds_destroy(struct drm_connector *connector) kfree(connector); } +static int intel_lvds_set_property(struct drm_connector *connector, + struct drm_property *property, + uint64_t value) +{ + struct drm_device *dev = connector->dev; + + if (property == dev->mode_config.dpms_property && connector->encoder) + intel_lvds_dpms(connector->encoder, (uint32_t)(value & 0xf)); + + return 0; +} + static const struct drm_encoder_helper_funcs intel_lvds_helper_funcs = { .dpms = intel_lvds_dpms, .mode_fixup = intel_lvds_mode_fixup, @@ -359,6 +371,7 @@ static const struct drm_connector_funcs intel_lvds_connector_funcs = { .restore = intel_lvds_restore, .detect = intel_lvds_detect, .fill_modes = drm_helper_probe_single_connector_modes, + .set_property = intel_lvds_set_property, .destroy = intel_lvds_destroy, }; diff --git a/drivers/i2c/busses/i2c-acorn.c b/drivers/i2c/busses/i2c-acorn.c index 75089febbc1..9fee3ca1734 100644 --- a/drivers/i2c/busses/i2c-acorn.c +++ b/drivers/i2c/busses/i2c-acorn.c @@ -83,7 +83,6 @@ static struct i2c_algo_bit_data ioc_data = { }; static struct i2c_adapter ioc_ops = { - .id = I2C_HW_B_IOC, .algo_data = &ioc_data, }; diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 9cead9b9458..981e080b32a 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -476,7 +476,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter ali1535_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_ALI1535, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-ali1563.c b/drivers/i2c/busses/i2c-ali1563.c index dd9e796fad6..f70f46582c6 100644 --- a/drivers/i2c/busses/i2c-ali1563.c +++ b/drivers/i2c/busses/i2c-ali1563.c @@ -386,7 +386,6 @@ static const struct i2c_algorithm ali1563_algorithm = { static struct i2c_adapter ali1563_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_ALI1563, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &ali1563_algorithm, }; diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 234fdde7d40..39066dee46e 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -473,7 +473,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter ali15x3_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_ALI15X3, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 36bee5b9c95..220f4a1eee1 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -298,7 +298,6 @@ static const struct i2c_algorithm smbus_algorithm = { struct i2c_adapter amd756_smbus = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_AMD756, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-amd8111.c b/drivers/i2c/busses/i2c-amd8111.c index 3972208876b..edab51973bf 100644 --- a/drivers/i2c/busses/i2c-amd8111.c +++ b/drivers/i2c/busses/i2c-amd8111.c @@ -387,7 +387,6 @@ static int __devinit amd8111_probe(struct pci_dev *dev, smbus->adapter.owner = THIS_MODULE; snprintf(smbus->adapter.name, sizeof(smbus->adapter.name), "SMBus2 AMD8111 adapter at %04x", smbus->base); - smbus->adapter.id = I2C_HW_SMBUS_AMD8111; smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; diff --git a/drivers/i2c/busses/i2c-au1550.c b/drivers/i2c/busses/i2c-au1550.c index 66a04c2c660..f78ce523e3d 100644 --- a/drivers/i2c/busses/i2c-au1550.c +++ b/drivers/i2c/busses/i2c-au1550.c @@ -400,7 +400,6 @@ i2c_au1550_probe(struct platform_device *pdev) priv->xfer_timeout = 200; priv->ack_timeout = 200; - priv->adap.id = I2C_HW_AU1550_PSC; priv->adap.nr = pdev->id; priv->adap.algo = &au1550_algo; priv->adap.algo_data = priv; diff --git a/drivers/i2c/busses/i2c-bfin-twi.c b/drivers/i2c/busses/i2c-bfin-twi.c index 3fd2c417c1e..fc548b3d002 100644 --- a/drivers/i2c/busses/i2c-bfin-twi.c +++ b/drivers/i2c/busses/i2c-bfin-twi.c @@ -651,7 +651,6 @@ static int i2c_bfin_twi_probe(struct platform_device *pdev) iface->timeout_timer.data = (unsigned long)iface; p_adap = &iface->adap; - p_adap->id = I2C_HW_BLACKFIN; p_adap->nr = pdev->id; strlcpy(p_adap->name, pdev->name, sizeof(p_adap->name)); p_adap->algo = &bfin_twi_algorithm; diff --git a/drivers/i2c/busses/i2c-elektor.c b/drivers/i2c/busses/i2c-elektor.c index 0ed3ccb81b6..448b4bf35eb 100644 --- a/drivers/i2c/busses/i2c-elektor.c +++ b/drivers/i2c/busses/i2c-elektor.c @@ -202,7 +202,6 @@ static struct i2c_algo_pcf_data pcf_isa_data = { static struct i2c_adapter pcf_isa_ops = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, - .id = I2C_HW_P_ELEK, .algo_data = &pcf_isa_data, .name = "i2c-elektor", }; diff --git a/drivers/i2c/busses/i2c-hydra.c b/drivers/i2c/busses/i2c-hydra.c index 648aa7baff8..bec9b845dd1 100644 --- a/drivers/i2c/busses/i2c-hydra.c +++ b/drivers/i2c/busses/i2c-hydra.c @@ -102,7 +102,6 @@ static struct i2c_algo_bit_data hydra_bit_data = { static struct i2c_adapter hydra_adap = { .owner = THIS_MODULE, .name = "Hydra i2c", - .id = I2C_HW_B_HYDRA, .algo_data = &hydra_bit_data, }; diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 526625eaa84..230238df56c 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -556,7 +556,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter i801_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_I801, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-ibm_iic.c b/drivers/i2c/busses/i2c-ibm_iic.c index 651f2f1ae5b..88f0db73b36 100644 --- a/drivers/i2c/busses/i2c-ibm_iic.c +++ b/drivers/i2c/busses/i2c-ibm_iic.c @@ -746,7 +746,6 @@ static int __devinit iic_probe(struct of_device *ofdev, adap->dev.parent = &ofdev->dev; strlcpy(adap->name, "IBM IIC", sizeof(adap->name)); i2c_set_adapdata(adap, dev); - adap->id = I2C_HW_OCP; adap->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; adap->algo = &iic_algo; adap->timeout = 1; diff --git a/drivers/i2c/busses/i2c-iop3xx.c b/drivers/i2c/busses/i2c-iop3xx.c index fc2714ac0c0..3190690c26c 100644 --- a/drivers/i2c/busses/i2c-iop3xx.c +++ b/drivers/i2c/busses/i2c-iop3xx.c @@ -480,7 +480,6 @@ iop3xx_i2c_probe(struct platform_device *pdev) } memcpy(new_adapter->name, pdev->name, strlen(pdev->name)); - new_adapter->id = I2C_HW_IOP3XX; new_adapter->owner = THIS_MODULE; new_adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; new_adapter->dev.parent = &pdev->dev; diff --git a/drivers/i2c/busses/i2c-ixp2000.c b/drivers/i2c/busses/i2c-ixp2000.c index 05d72e98135..8e846797048 100644 --- a/drivers/i2c/busses/i2c-ixp2000.c +++ b/drivers/i2c/busses/i2c-ixp2000.c @@ -116,7 +116,6 @@ static int ixp2000_i2c_probe(struct platform_device *plat_dev) drv_data->algo_data.udelay = 6; drv_data->algo_data.timeout = 100; - drv_data->adapter.id = I2C_HW_B_IXP2000, strlcpy(drv_data->adapter.name, plat_dev->dev.driver->name, sizeof(drv_data->adapter.name)); drv_data->adapter.algo_data = &drv_data->algo_data, diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c index a9a45fcc854..aedbbe6618d 100644 --- a/drivers/i2c/busses/i2c-mpc.c +++ b/drivers/i2c/busses/i2c-mpc.c @@ -310,7 +310,6 @@ static const struct i2c_algorithm mpc_algo = { static struct i2c_adapter mpc_ops = { .owner = THIS_MODULE, .name = "MPC adapter", - .id = I2C_HW_MPC107, .algo = &mpc_algo, .timeout = 1, }; diff --git a/drivers/i2c/busses/i2c-mv64xxx.c b/drivers/i2c/busses/i2c-mv64xxx.c index 9e8118d2fe6..eeda276f8f1 100644 --- a/drivers/i2c/busses/i2c-mv64xxx.c +++ b/drivers/i2c/busses/i2c-mv64xxx.c @@ -527,7 +527,6 @@ mv64xxx_i2c_probe(struct platform_device *pd) goto exit_unmap_regs; } drv_data->adapter.dev.parent = &pd->dev; - drv_data->adapter.id = I2C_HW_MV64XXX; drv_data->adapter.algo = &mv64xxx_i2c_algo; drv_data->adapter.owner = THIS_MODULE; drv_data->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 3b19bc41a60..05af6cd7f27 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -355,7 +355,6 @@ static int __devinit nforce2_probe_smb (struct pci_dev *dev, int bar, return -EBUSY; } smbus->adapter.owner = THIS_MODULE; - smbus->adapter.id = I2C_HW_SMBUS_NFORCE2; smbus->adapter.class = I2C_CLASS_HWMON | I2C_CLASS_SPD; smbus->adapter.algo = &smbus_algorithm; smbus->adapter.algo_data = smbus; diff --git a/drivers/i2c/busses/i2c-parport-light.c b/drivers/i2c/busses/i2c-parport-light.c index b2b8380f660..322c5691e38 100644 --- a/drivers/i2c/busses/i2c-parport-light.c +++ b/drivers/i2c/busses/i2c-parport-light.c @@ -115,7 +115,6 @@ static struct i2c_algo_bit_data parport_algo_data = { static struct i2c_adapter parport_adapter = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON, - .id = I2C_HW_B_LP, .algo_data = &parport_algo_data, .name = "Parallel port adapter (light)", }; diff --git a/drivers/i2c/busses/i2c-parport.c b/drivers/i2c/busses/i2c-parport.c index a257cd5cd13..0d8998610c7 100644 --- a/drivers/i2c/busses/i2c-parport.c +++ b/drivers/i2c/busses/i2c-parport.c @@ -164,7 +164,6 @@ static void i2c_parport_attach (struct parport *port) /* Fill the rest of the structure */ adapter->adapter.owner = THIS_MODULE; adapter->adapter.class = I2C_CLASS_HWMON; - adapter->adapter.id = I2C_HW_B_LP; strlcpy(adapter->adapter.name, "Parallel port adapter", sizeof(adapter->adapter.name)); adapter->algo_data = parport_algo_data; diff --git a/drivers/i2c/busses/i2c-pca-isa.c b/drivers/i2c/busses/i2c-pca-isa.c index 9eb76268ec7..4aa8138cb0a 100644 --- a/drivers/i2c/busses/i2c-pca-isa.c +++ b/drivers/i2c/busses/i2c-pca-isa.c @@ -101,7 +101,6 @@ static struct i2c_algo_pca_data pca_isa_data = { static struct i2c_adapter pca_isa_ops = { .owner = THIS_MODULE, - .id = I2C_HW_A_ISA, .algo_data = &pca_isa_data, .name = "PCA9564 ISA Adapter", .timeout = 100, diff --git a/drivers/i2c/busses/i2c-piix4.c b/drivers/i2c/busses/i2c-piix4.c index eaa9b387543..761f9dd5362 100644 --- a/drivers/i2c/busses/i2c-piix4.c +++ b/drivers/i2c/busses/i2c-piix4.c @@ -403,7 +403,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter piix4_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_PIIX4, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sibyte.c b/drivers/i2c/busses/i2c-sibyte.c index 4ddefbf238e..98b1ec48915 100644 --- a/drivers/i2c/busses/i2c-sibyte.c +++ b/drivers/i2c/busses/i2c-sibyte.c @@ -155,7 +155,6 @@ static struct i2c_algo_sibyte_data sibyte_board_data[2] = { static struct i2c_adapter sibyte_board_adapter[2] = { { .owner = THIS_MODULE, - .id = I2C_HW_SIBYTE, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = NULL, .algo_data = &sibyte_board_data[0], @@ -164,7 +163,6 @@ static struct i2c_adapter sibyte_board_adapter[2] = { }, { .owner = THIS_MODULE, - .id = I2C_HW_SIBYTE, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = NULL, .algo_data = &sibyte_board_data[1], diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index 8ce2daff985..f320ab27da4 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -365,7 +365,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis5595_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_SIS5595, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 9c9c016ff2b..50c3610e602 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -464,7 +464,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis630_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_SIS630, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index f1bba639664..7e1594b4057 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -241,7 +241,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter sis96x_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_SIS96X, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-via.c b/drivers/i2c/busses/i2c-via.c index 29cef0433f3..8b24f192103 100644 --- a/drivers/i2c/busses/i2c-via.c +++ b/drivers/i2c/busses/i2c-via.c @@ -83,7 +83,6 @@ static struct i2c_algo_bit_data bit_data = { static struct i2c_adapter vt586b_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_B_VIA, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .name = "VIA i2c", .algo_data = &bit_data, diff --git a/drivers/i2c/busses/i2c-viapro.c b/drivers/i2c/busses/i2c-viapro.c index 9f194d9efd9..02e6f724b05 100644 --- a/drivers/i2c/busses/i2c-viapro.c +++ b/drivers/i2c/busses/i2c-viapro.c @@ -321,7 +321,6 @@ static const struct i2c_algorithm smbus_algorithm = { static struct i2c_adapter vt596_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_SMBUS_VIA2, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, .algo = &smbus_algorithm, }; diff --git a/drivers/i2c/busses/i2c-voodoo3.c b/drivers/i2c/busses/i2c-voodoo3.c index 1d4ae26ba73..1a474acc0dd 100644 --- a/drivers/i2c/busses/i2c-voodoo3.c +++ b/drivers/i2c/busses/i2c-voodoo3.c @@ -163,7 +163,6 @@ static struct i2c_algo_bit_data voo_i2c_bit_data = { static struct i2c_adapter voodoo3_i2c_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_B_VOO, .class = I2C_CLASS_TV_ANALOG, .name = "I2C Voodoo3/Banshee adapter", .algo_data = &voo_i2c_bit_data, @@ -180,7 +179,6 @@ static struct i2c_algo_bit_data voo_ddc_bit_data = { static struct i2c_adapter voodoo3_ddc_adapter = { .owner = THIS_MODULE, - .id = I2C_HW_B_VOO, .class = I2C_CLASS_DDC, .name = "DDC Voodoo3/Banshee adapter", .algo_data = &voo_ddc_bit_data, diff --git a/drivers/i2c/busses/scx200_acb.c b/drivers/i2c/busses/scx200_acb.c index ed794b145a1..648ecc6f60e 100644 --- a/drivers/i2c/busses/scx200_acb.c +++ b/drivers/i2c/busses/scx200_acb.c @@ -440,7 +440,6 @@ static __init struct scx200_acb_iface *scx200_create_iface(const char *text, i2c_set_adapdata(adapter, iface); snprintf(adapter->name, sizeof(adapter->name), "%s ACB%d", text, index); adapter->owner = THIS_MODULE; - adapter->id = I2C_HW_SMBUS_SCX200; adapter->algo = &scx200_acb_algorithm; adapter->class = I2C_CLASS_HWMON | I2C_CLASS_SPD; adapter->dev.parent = dev; diff --git a/drivers/i2c/busses/scx200_i2c.c b/drivers/i2c/busses/scx200_i2c.c index e4c98539c51..162b74a0488 100644 --- a/drivers/i2c/busses/scx200_i2c.c +++ b/drivers/i2c/busses/scx200_i2c.c @@ -82,7 +82,6 @@ static struct i2c_algo_bit_data scx200_i2c_data = { static struct i2c_adapter scx200_i2c_ops = { .owner = THIS_MODULE, .class = I2C_CLASS_HWMON | I2C_CLASS_SPD, - .id = I2C_HW_B_SCX200, .algo_data = &scx200_i2c_data, .name = "NatSemi SCx200 I2C", }; diff --git a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig index b9bef04b7be..c80312c1f38 100644 --- a/drivers/i2c/chips/Kconfig +++ b/drivers/i2c/chips/Kconfig @@ -16,43 +16,6 @@ config DS1682 This driver can also be built as a module. If so, the module will be called ds1682. -config AT24 - tristate "EEPROMs from most vendors" - depends on SYSFS && EXPERIMENTAL - help - Enable this driver to get read/write support to most I2C EEPROMs, - after you configure the driver to know about each EEPROM on - your target board. Use these generic chip names, instead of - vendor-specific ones like at24c64 or 24lc02: - - 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08, - 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024 - - Unless you like data loss puzzles, always be sure that any chip - you configure as a 24c32 (32 kbit) or larger is NOT really a - 24c16 (16 kbit) or smaller, and vice versa. Marking the chip - as read-only won't help recover from this. Also, if your chip - has any software write-protect mechanism you may want to review the - code to make sure this driver won't turn it on by accident. - - If you use this with an SMBus adapter instead of an I2C adapter, - full functionality is not available. Only smaller devices are - supported (24c16 and below, max 4 kByte). - - This driver can also be built as a module. If so, the module - will be called at24. - -config SENSORS_EEPROM - tristate "EEPROM reader" - depends on EXPERIMENTAL - help - If you say yes here you get read-only access to the EEPROM data - available on modern memory DIMMs and Sony Vaio laptops. Such - EEPROMs could theoretically be available on other devices as well. - - This driver can also be built as a module. If so, the module - will be called eeprom. - config SENSORS_PCF8574 tristate "Philips PCF8574 and PCF8574A (DEPRECATED)" depends on EXPERIMENTAL && GPIO_PCF857X = "n" diff --git a/drivers/i2c/chips/Makefile b/drivers/i2c/chips/Makefile index 00fcb5193ac..d142f238a2d 100644 --- a/drivers/i2c/chips/Makefile +++ b/drivers/i2c/chips/Makefile @@ -11,8 +11,6 @@ # obj-$(CONFIG_DS1682) += ds1682.o -obj-$(CONFIG_AT24) += at24.o -obj-$(CONFIG_SENSORS_EEPROM) += eeprom.o obj-$(CONFIG_SENSORS_MAX6875) += max6875.o obj-$(CONFIG_SENSORS_PCA9539) += pca9539.o obj-$(CONFIG_SENSORS_PCF8574) += pcf8574.o diff --git a/drivers/ide/falconide.c b/drivers/ide/falconide.c index a5ba820d69b..a638e952d67 100644 --- a/drivers/ide/falconide.c +++ b/drivers/ide/falconide.c @@ -82,7 +82,7 @@ static const struct ide_tp_ops falconide_tp_ops = { static const struct ide_port_info falconide_port_info = { .tp_ops = &falconide_tp_ops, - .host_flags = IDE_HFLAG_NO_DMA, + .host_flags = IDE_HFLAG_NO_DMA | IDE_HFLAG_SERIALIZE, }; static void __init falconide_setup_ports(hw_regs_t *hw) diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 312127ea443..0db1ed9f5fc 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -649,7 +649,8 @@ static int ide_register_port(ide_hwif_t *hwif) /* register with global device tree */ dev_set_name(&hwif->gendev, hwif->name); hwif->gendev.driver_data = hwif; - hwif->gendev.parent = hwif->dev; + if (hwif->gendev.parent == NULL) + hwif->gendev.parent = hwif->dev; hwif->gendev.release = hwif_release_dev; ret = device_register(&hwif->gendev); diff --git a/drivers/ide/palm_bk3710.c b/drivers/ide/palm_bk3710.c index a7ac490c9ae..f38aac78044 100644 --- a/drivers/ide/palm_bk3710.c +++ b/drivers/ide/palm_bk3710.c @@ -346,7 +346,8 @@ static int __init palm_bk3710_probe(struct platform_device *pdev) { struct clk *clk; struct resource *mem, *irq; - unsigned long base, rate; + void __iomem *base; + unsigned long rate; int i, rc; hw_regs_t hw, *hws[] = { &hw, NULL, NULL, NULL }; @@ -382,11 +383,13 @@ static int __init palm_bk3710_probe(struct platform_device *pdev) base = IO_ADDRESS(mem->start); /* Configure the Palm Chip controller */ - palm_bk3710_chipinit((void __iomem *)base); + palm_bk3710_chipinit(base); for (i = 0; i < IDE_NR_PORTS - 2; i++) - hw.io_ports_array[i] = base + IDE_PALM_ATA_PRI_REG_OFFSET + i; - hw.io_ports.ctl_addr = base + IDE_PALM_ATA_PRI_CTL_OFFSET; + hw.io_ports_array[i] = (unsigned long) + (base + IDE_PALM_ATA_PRI_REG_OFFSET + i); + hw.io_ports.ctl_addr = (unsigned long) + (base + IDE_PALM_ATA_PRI_CTL_OFFSET); hw.irq = irq->start; hw.dev = &pdev->dev; hw.chipset = ide_palm3710; diff --git a/drivers/ieee1394/pcilynx.c b/drivers/ieee1394/pcilynx.c index dc15cadb06e..38f71203620 100644 --- a/drivers/ieee1394/pcilynx.c +++ b/drivers/ieee1394/pcilynx.c @@ -1419,7 +1419,6 @@ static int __devinit add_card(struct pci_dev *dev, i2c_ad = kzalloc(sizeof(*i2c_ad), GFP_KERNEL); if (!i2c_ad) FAIL("failed to allocate I2C adapter memory"); - i2c_ad->id = I2C_HW_B_PCILYNX; strlcpy(i2c_ad->name, "PCILynx I2C", sizeof(i2c_ad->name)); i2c_adapter_data = bit_data; i2c_ad->algo_data = &i2c_adapter_data; diff --git a/drivers/isdn/i4l/isdn_ppp.c b/drivers/isdn/i4l/isdn_ppp.c index a3551dd0324..aa30b5cb351 100644 --- a/drivers/isdn/i4l/isdn_ppp.c +++ b/drivers/isdn/i4l/isdn_ppp.c @@ -431,6 +431,7 @@ set_arg(void __user *b, void *val,int len) return 0; } +#ifdef CONFIG_IPPP_FILTER static int get_filter(void __user *arg, struct sock_filter **p) { struct sock_fprog uprog; @@ -465,6 +466,7 @@ static int get_filter(void __user *arg, struct sock_filter **p) *p = code; return uprog.len; } +#endif /* CONFIG_IPPP_FILTER */ /* * ippp device ioctl diff --git a/drivers/misc/Kconfig b/drivers/misc/Kconfig index 419c378bd24..396d935012f 100644 --- a/drivers/misc/Kconfig +++ b/drivers/misc/Kconfig @@ -87,14 +87,6 @@ config PHANTOM If you choose to build module, its name will be phantom. If unsure, say N here. -config EEPROM_93CX6 - tristate "EEPROM 93CX6 support" - ---help--- - This is a driver for the EEPROM chipsets 93c46 and 93c66. - The driver supports both read as well as write commands. - - If unsure, say N. - config SGI_IOC4 tristate "SGI IOC4 Base IO support" depends on PCI @@ -170,7 +162,7 @@ config ENCLOSURE_SERVICES config SGI_XP tristate "Support communication between SGI SSIs" depends on NET - depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_64) && SMP + depends on (IA64_GENERIC || IA64_SGI_SN2 || IA64_SGI_UV || X86_UV) && SMP select IA64_UNCACHED_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 select GENERIC_ALLOCATOR if IA64_GENERIC || IA64_SGI_SN2 select SGI_GRU if (IA64_GENERIC || IA64_SGI_UV || X86_64) && SMP @@ -197,7 +189,7 @@ config HP_ILO config SGI_GRU tristate "SGI GRU driver" - depends on (X86_64 || IA64_SGI_UV || IA64_GENERIC) && SMP + depends on (X86_UV || IA64_SGI_UV || IA64_GENERIC) && SMP default n select MMU_NOTIFIER ---help--- @@ -231,5 +223,6 @@ config DELL_LAPTOP laptops. source "drivers/misc/c2port/Kconfig" +source "drivers/misc/eeprom/Kconfig" endif # MISC_DEVICES diff --git a/drivers/misc/Makefile b/drivers/misc/Makefile index d5749a7bc77..bc119983055 100644 --- a/drivers/misc/Makefile +++ b/drivers/misc/Makefile @@ -13,10 +13,10 @@ obj-$(CONFIG_TIFM_CORE) += tifm_core.o obj-$(CONFIG_TIFM_7XX1) += tifm_7xx1.o obj-$(CONFIG_PHANTOM) += phantom.o obj-$(CONFIG_SGI_IOC4) += ioc4.o -obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o obj-$(CONFIG_ENCLOSURE_SERVICES) += enclosure.o obj-$(CONFIG_KGDB_TESTS) += kgdbts.o obj-$(CONFIG_SGI_XP) += sgi-xp/ obj-$(CONFIG_SGI_GRU) += sgi-gru/ obj-$(CONFIG_HP_ILO) += hpilo.o obj-$(CONFIG_C2PORT) += c2port/ +obj-y += eeprom/ diff --git a/drivers/misc/eeprom/Kconfig b/drivers/misc/eeprom/Kconfig new file mode 100644 index 00000000000..c76df8cda5e --- /dev/null +++ b/drivers/misc/eeprom/Kconfig @@ -0,0 +1,59 @@ +menu "EEPROM support" + +config EEPROM_AT24 + tristate "I2C EEPROMs from most vendors" + depends on I2C && SYSFS && EXPERIMENTAL + help + Enable this driver to get read/write support to most I2C EEPROMs, + after you configure the driver to know about each EEPROM on + your target board. Use these generic chip names, instead of + vendor-specific ones like at24c64 or 24lc02: + + 24c00, 24c01, 24c02, spd (readonly 24c02), 24c04, 24c08, + 24c16, 24c32, 24c64, 24c128, 24c256, 24c512, 24c1024 + + Unless you like data loss puzzles, always be sure that any chip + you configure as a 24c32 (32 kbit) or larger is NOT really a + 24c16 (16 kbit) or smaller, and vice versa. Marking the chip + as read-only won't help recover from this. Also, if your chip + has any software write-protect mechanism you may want to review the + code to make sure this driver won't turn it on by accident. + + If you use this with an SMBus adapter instead of an I2C adapter, + full functionality is not available. Only smaller devices are + supported (24c16 and below, max 4 kByte). + + This driver can also be built as a module. If so, the module + will be called at24. + +config EEPROM_AT25 + tristate "SPI EEPROMs from most vendors" + depends on SPI && SYSFS + help + Enable this driver to get read/write support to most SPI EEPROMs, + after you configure the board init code to know about each eeprom + on your target board. + + This driver can also be built as a module. If so, the module + will be called at25. + +config EEPROM_LEGACY + tristate "Old I2C EEPROM reader" + depends on I2C && SYSFS + help + If you say yes here you get read-only access to the EEPROM data + available on modern memory DIMMs and Sony Vaio laptops via I2C. Such + EEPROMs could theoretically be available on other devices as well. + + This driver can also be built as a module. If so, the module + will be called eeprom. + +config EEPROM_93CX6 + tristate "EEPROM 93CX6 support" + help + This is a driver for the EEPROM chipsets 93c46 and 93c66. + The driver supports both read as well as write commands. + + If unsure, say N. + +endmenu diff --git a/drivers/misc/eeprom/Makefile b/drivers/misc/eeprom/Makefile new file mode 100644 index 00000000000..539dd8f8812 --- /dev/null +++ b/drivers/misc/eeprom/Makefile @@ -0,0 +1,4 @@ +obj-$(CONFIG_EEPROM_AT24) += at24.o +obj-$(CONFIG_EEPROM_AT25) += at25.o +obj-$(CONFIG_EEPROM_LEGACY) += eeprom.o +obj-$(CONFIG_EEPROM_93CX6) += eeprom_93cx6.o diff --git a/drivers/i2c/chips/at24.c b/drivers/misc/eeprom/at24.c index d4775528abc..d4775528abc 100644 --- a/drivers/i2c/chips/at24.c +++ b/drivers/misc/eeprom/at24.c diff --git a/drivers/spi/at25.c b/drivers/misc/eeprom/at25.c index 290dbe99647..290dbe99647 100644 --- a/drivers/spi/at25.c +++ b/drivers/misc/eeprom/at25.c diff --git a/drivers/i2c/chips/eeprom.c b/drivers/misc/eeprom/eeprom.c index 2c27193aeaa..2c27193aeaa 100644 --- a/drivers/i2c/chips/eeprom.c +++ b/drivers/misc/eeprom/eeprom.c diff --git a/drivers/misc/eeprom_93cx6.c b/drivers/misc/eeprom/eeprom_93cx6.c index 15b1780025c..15b1780025c 100644 --- a/drivers/misc/eeprom_93cx6.c +++ b/drivers/misc/eeprom/eeprom_93cx6.c diff --git a/drivers/misc/sgi-gru/gru.h b/drivers/misc/sgi-gru/gru.h index f93f03a9e6e..1b5f579df15 100644 --- a/drivers/misc/sgi-gru/gru.h +++ b/drivers/misc/sgi-gru/gru.h @@ -19,6 +19,8 @@ #ifndef __GRU_H__ #define __GRU_H__ +#include <asm/uv/uv.h> + /* * GRU architectural definitions */ diff --git a/drivers/misc/sgi-xp/xp.h b/drivers/misc/sgi-xp/xp.h index 7b4cbd5e03e..069ad3a1c2a 100644 --- a/drivers/misc/sgi-xp/xp.h +++ b/drivers/misc/sgi-xp/xp.h @@ -15,6 +15,8 @@ #include <linux/mutex.h> +#include <asm/uv/uv.h> + #ifdef CONFIG_IA64 #include <asm/system.h> #include <asm/sn/arch.h> /* defines is_shub1() and is_shub2() */ diff --git a/drivers/misc/sgi-xp/xpc_main.c b/drivers/misc/sgi-xp/xpc_main.c index 89218f7cfaa..6576170de96 100644 --- a/drivers/misc/sgi-xp/xpc_main.c +++ b/drivers/misc/sgi-xp/xpc_main.c @@ -318,7 +318,7 @@ xpc_hb_checker(void *ignore) /* this thread was marked active by xpc_hb_init() */ - set_cpus_allowed_ptr(current, &cpumask_of_cpu(XPC_HB_CHECK_CPU)); + set_cpus_allowed_ptr(current, cpumask_of(XPC_HB_CHECK_CPU)); /* set our heartbeating to other partitions into motion */ xpc_hb_check_timeout = jiffies + (xpc_hb_check_interval * HZ); diff --git a/drivers/mmc/host/Kconfig b/drivers/mmc/host/Kconfig index dfa585f7fea..0efa390978b 100644 --- a/drivers/mmc/host/Kconfig +++ b/drivers/mmc/host/Kconfig @@ -76,6 +76,16 @@ config MMC_OMAP If unsure, say N. +config MMC_OMAP_HS + tristate "TI OMAP High Speed Multimedia Card Interface support" + depends on ARCH_OMAP2430 || ARCH_OMAP3 + help + This selects the TI OMAP High Speed Multimedia card Interface. + If you have an OMAP2430 or OMAP3 board with a Multimedia Card slot, + say Y or M here. + + If unsure, say N. + config MMC_WBSD tristate "Winbond W83L51xD SD/MMC Card Interface support" depends on ISA_DMA_API diff --git a/drivers/mmc/host/Makefile b/drivers/mmc/host/Makefile index f4853288bbb..98cab84829b 100644 --- a/drivers/mmc/host/Makefile +++ b/drivers/mmc/host/Makefile @@ -15,6 +15,7 @@ obj-$(CONFIG_MMC_RICOH_MMC) += ricoh_mmc.o obj-$(CONFIG_MMC_WBSD) += wbsd.o obj-$(CONFIG_MMC_AU1X) += au1xmmc.o obj-$(CONFIG_MMC_OMAP) += omap.o +obj-$(CONFIG_MMC_OMAP_HS) += omap_hsmmc.o obj-$(CONFIG_MMC_AT91) += at91_mci.o obj-$(CONFIG_MMC_ATMELMCI) += atmel-mci.o obj-$(CONFIG_MMC_TIFM_SD) += tifm_sd.o diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c new file mode 100644 index 00000000000..db37490f67e --- /dev/null +++ b/drivers/mmc/host/omap_hsmmc.c @@ -0,0 +1,1242 @@ +/* + * drivers/mmc/host/omap_hsmmc.c + * + * Driver for OMAP2430/3430 MMC controller. + * + * Copyright (C) 2007 Texas Instruments. + * + * Authors: + * Syed Mohammed Khasim <x0khasim@ti.com> + * Madhusudhan <madhu.cr@ti.com> + * Mohit Jalori <mjalori@ti.com> + * + * This file is licensed under the terms of the GNU General Public License + * version 2. This program is licensed "as is" without any warranty of any + * kind, whether express or implied. + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/delay.h> +#include <linux/dma-mapping.h> +#include <linux/platform_device.h> +#include <linux/workqueue.h> +#include <linux/timer.h> +#include <linux/clk.h> +#include <linux/mmc/host.h> +#include <linux/io.h> +#include <linux/semaphore.h> +#include <mach/dma.h> +#include <mach/hardware.h> +#include <mach/board.h> +#include <mach/mmc.h> +#include <mach/cpu.h> + +/* OMAP HSMMC Host Controller Registers */ +#define OMAP_HSMMC_SYSCONFIG 0x0010 +#define OMAP_HSMMC_CON 0x002C +#define OMAP_HSMMC_BLK 0x0104 +#define OMAP_HSMMC_ARG 0x0108 +#define OMAP_HSMMC_CMD 0x010C +#define OMAP_HSMMC_RSP10 0x0110 +#define OMAP_HSMMC_RSP32 0x0114 +#define OMAP_HSMMC_RSP54 0x0118 +#define OMAP_HSMMC_RSP76 0x011C +#define OMAP_HSMMC_DATA 0x0120 +#define OMAP_HSMMC_HCTL 0x0128 +#define OMAP_HSMMC_SYSCTL 0x012C +#define OMAP_HSMMC_STAT 0x0130 +#define OMAP_HSMMC_IE 0x0134 +#define OMAP_HSMMC_ISE 0x0138 +#define OMAP_HSMMC_CAPA 0x0140 + +#define VS18 (1 << 26) +#define VS30 (1 << 25) +#define SDVS18 (0x5 << 9) +#define SDVS30 (0x6 << 9) +#define SDVSCLR 0xFFFFF1FF +#define SDVSDET 0x00000400 +#define AUTOIDLE 0x1 +#define SDBP (1 << 8) +#define DTO 0xe +#define ICE 0x1 +#define ICS 0x2 +#define CEN (1 << 2) +#define CLKD_MASK 0x0000FFC0 +#define CLKD_SHIFT 6 +#define DTO_MASK 0x000F0000 +#define DTO_SHIFT 16 +#define INT_EN_MASK 0x307F0033 +#define INIT_STREAM (1 << 1) +#define DP_SELECT (1 << 21) +#define DDIR (1 << 4) +#define DMA_EN 0x1 +#define MSBS (1 << 5) +#define BCE (1 << 1) +#define FOUR_BIT (1 << 1) +#define CC 0x1 +#define TC 0x02 +#define OD 0x1 +#define ERR (1 << 15) +#define CMD_TIMEOUT (1 << 16) +#define DATA_TIMEOUT (1 << 20) +#define CMD_CRC (1 << 17) +#define DATA_CRC (1 << 21) +#define CARD_ERR (1 << 28) +#define STAT_CLEAR 0xFFFFFFFF +#define INIT_STREAM_CMD 0x00000000 +#define DUAL_VOLT_OCR_BIT 7 +#define SRC (1 << 25) +#define SRD (1 << 26) + +/* + * FIXME: Most likely all the data using these _DEVID defines should come + * from the platform_data, or implemented in controller and slot specific + * functions. + */ +#define OMAP_MMC1_DEVID 0 +#define OMAP_MMC2_DEVID 1 + +#define OMAP_MMC_DATADIR_NONE 0 +#define OMAP_MMC_DATADIR_READ 1 +#define OMAP_MMC_DATADIR_WRITE 2 +#define MMC_TIMEOUT_MS 20 +#define OMAP_MMC_MASTER_CLOCK 96000000 +#define DRIVER_NAME "mmci-omap-hs" + +/* + * One controller can have multiple slots, like on some omap boards using + * omap.c controller driver. Luckily this is not currently done on any known + * omap_hsmmc.c device. + */ +#define mmc_slot(host) (host->pdata->slots[host->slot_id]) + +/* + * MMC Host controller read/write API's + */ +#define OMAP_HSMMC_READ(base, reg) \ + __raw_readl((base) + OMAP_HSMMC_##reg) + +#define OMAP_HSMMC_WRITE(base, reg, val) \ + __raw_writel((val), (base) + OMAP_HSMMC_##reg) + +struct mmc_omap_host { + struct device *dev; + struct mmc_host *mmc; + struct mmc_request *mrq; + struct mmc_command *cmd; + struct mmc_data *data; + struct clk *fclk; + struct clk *iclk; + struct clk *dbclk; + struct semaphore sem; + struct work_struct mmc_carddetect_work; + void __iomem *base; + resource_size_t mapbase; + unsigned int id; + unsigned int dma_len; + unsigned int dma_dir; + unsigned char bus_mode; + unsigned char datadir; + u32 *buffer; + u32 bytesleft; + int suspended; + int irq; + int carddetect; + int use_dma, dma_ch; + int initstr; + int slot_id; + int dbclk_enabled; + struct omap_mmc_platform_data *pdata; +}; + +/* + * Stop clock to the card + */ +static void omap_mmc_stop_clock(struct mmc_omap_host *host) +{ + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) & ~CEN); + if ((OMAP_HSMMC_READ(host->base, SYSCTL) & CEN) != 0x0) + dev_dbg(mmc_dev(host->mmc), "MMC Clock is not stoped\n"); +} + +/* + * Send init stream sequence to card + * before sending IDLE command + */ +static void send_init_stream(struct mmc_omap_host *host) +{ + int reg = 0; + unsigned long timeout; + + disable_irq(host->irq); + OMAP_HSMMC_WRITE(host->base, CON, + OMAP_HSMMC_READ(host->base, CON) | INIT_STREAM); + OMAP_HSMMC_WRITE(host->base, CMD, INIT_STREAM_CMD); + + timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); + while ((reg != CC) && time_before(jiffies, timeout)) + reg = OMAP_HSMMC_READ(host->base, STAT) & CC; + + OMAP_HSMMC_WRITE(host->base, CON, + OMAP_HSMMC_READ(host->base, CON) & ~INIT_STREAM); + enable_irq(host->irq); +} + +static inline +int mmc_omap_cover_is_closed(struct mmc_omap_host *host) +{ + int r = 1; + + if (host->pdata->slots[host->slot_id].get_cover_state) + r = host->pdata->slots[host->slot_id].get_cover_state(host->dev, + host->slot_id); + return r; +} + +static ssize_t +mmc_omap_show_cover_switch(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev); + struct mmc_omap_host *host = mmc_priv(mmc); + + return sprintf(buf, "%s\n", mmc_omap_cover_is_closed(host) ? "closed" : + "open"); +} + +static DEVICE_ATTR(cover_switch, S_IRUGO, mmc_omap_show_cover_switch, NULL); + +static ssize_t +mmc_omap_show_slot_name(struct device *dev, struct device_attribute *attr, + char *buf) +{ + struct mmc_host *mmc = container_of(dev, struct mmc_host, class_dev); + struct mmc_omap_host *host = mmc_priv(mmc); + struct omap_mmc_slot_data slot = host->pdata->slots[host->slot_id]; + + return sprintf(buf, "slot:%s\n", slot.name); +} + +static DEVICE_ATTR(slot_name, S_IRUGO, mmc_omap_show_slot_name, NULL); + +/* + * Configure the response type and send the cmd. + */ +static void +mmc_omap_start_command(struct mmc_omap_host *host, struct mmc_command *cmd, + struct mmc_data *data) +{ + int cmdreg = 0, resptype = 0, cmdtype = 0; + + dev_dbg(mmc_dev(host->mmc), "%s: CMD%d, argument 0x%08x\n", + mmc_hostname(host->mmc), cmd->opcode, cmd->arg); + host->cmd = cmd; + + /* + * Clear status bits and enable interrupts + */ + OMAP_HSMMC_WRITE(host->base, STAT, STAT_CLEAR); + OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK); + OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK); + + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) + resptype = 1; + else + resptype = 2; + } + + /* + * Unlike OMAP1 controller, the cmdtype does not seem to be based on + * ac, bc, adtc, bcr. Only commands ending an open ended transfer need + * a val of 0x3, rest 0x0. + */ + if (cmd == host->mrq->stop) + cmdtype = 0x3; + + cmdreg = (cmd->opcode << 24) | (resptype << 16) | (cmdtype << 22); + + if (data) { + cmdreg |= DP_SELECT | MSBS | BCE; + if (data->flags & MMC_DATA_READ) + cmdreg |= DDIR; + else + cmdreg &= ~(DDIR); + } + + if (host->use_dma) + cmdreg |= DMA_EN; + + OMAP_HSMMC_WRITE(host->base, ARG, cmd->arg); + OMAP_HSMMC_WRITE(host->base, CMD, cmdreg); +} + +/* + * Notify the transfer complete to MMC core + */ +static void +mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data) +{ + host->data = NULL; + + if (host->use_dma && host->dma_ch != -1) + dma_unmap_sg(mmc_dev(host->mmc), data->sg, host->dma_len, + host->dma_dir); + + host->datadir = OMAP_MMC_DATADIR_NONE; + + if (!data->error) + data->bytes_xfered += data->blocks * (data->blksz); + else + data->bytes_xfered = 0; + + if (!data->stop) { + host->mrq = NULL; + mmc_request_done(host->mmc, data->mrq); + return; + } + mmc_omap_start_command(host, data->stop, NULL); +} + +/* + * Notify the core about command completion + */ +static void +mmc_omap_cmd_done(struct mmc_omap_host *host, struct mmc_command *cmd) +{ + host->cmd = NULL; + + if (cmd->flags & MMC_RSP_PRESENT) { + if (cmd->flags & MMC_RSP_136) { + /* response type 2 */ + cmd->resp[3] = OMAP_HSMMC_READ(host->base, RSP10); + cmd->resp[2] = OMAP_HSMMC_READ(host->base, RSP32); + cmd->resp[1] = OMAP_HSMMC_READ(host->base, RSP54); + cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP76); + } else { + /* response types 1, 1b, 3, 4, 5, 6 */ + cmd->resp[0] = OMAP_HSMMC_READ(host->base, RSP10); + } + } + if (host->data == NULL || cmd->error) { + host->mrq = NULL; + mmc_request_done(host->mmc, cmd->mrq); + } +} + +/* + * DMA clean up for command errors + */ +static void mmc_dma_cleanup(struct mmc_omap_host *host) +{ + host->data->error = -ETIMEDOUT; + + if (host->use_dma && host->dma_ch != -1) { + dma_unmap_sg(mmc_dev(host->mmc), host->data->sg, host->dma_len, + host->dma_dir); + omap_free_dma(host->dma_ch); + host->dma_ch = -1; + up(&host->sem); + } + host->data = NULL; + host->datadir = OMAP_MMC_DATADIR_NONE; +} + +/* + * Readable error output + */ +#ifdef CONFIG_MMC_DEBUG +static void mmc_omap_report_irq(struct mmc_omap_host *host, u32 status) +{ + /* --- means reserved bit without definition at documentation */ + static const char *mmc_omap_status_bits[] = { + "CC", "TC", "BGE", "---", "BWR", "BRR", "---", "---", "CIRQ", + "OBI", "---", "---", "---", "---", "---", "ERRI", "CTO", "CCRC", + "CEB", "CIE", "DTO", "DCRC", "DEB", "---", "ACE", "---", + "---", "---", "---", "CERR", "CERR", "BADA", "---", "---", "---" + }; + char res[256]; + char *buf = res; + int len, i; + + len = sprintf(buf, "MMC IRQ 0x%x :", status); + buf += len; + + for (i = 0; i < ARRAY_SIZE(mmc_omap_status_bits); i++) + if (status & (1 << i)) { + len = sprintf(buf, " %s", mmc_omap_status_bits[i]); + buf += len; + } + + dev_dbg(mmc_dev(host->mmc), "%s\n", res); +} +#endif /* CONFIG_MMC_DEBUG */ + + +/* + * MMC controller IRQ handler + */ +static irqreturn_t mmc_omap_irq(int irq, void *dev_id) +{ + struct mmc_omap_host *host = dev_id; + struct mmc_data *data; + int end_cmd = 0, end_trans = 0, status; + + if (host->cmd == NULL && host->data == NULL) { + OMAP_HSMMC_WRITE(host->base, STAT, + OMAP_HSMMC_READ(host->base, STAT)); + return IRQ_HANDLED; + } + + data = host->data; + status = OMAP_HSMMC_READ(host->base, STAT); + dev_dbg(mmc_dev(host->mmc), "IRQ Status is %x\n", status); + + if (status & ERR) { +#ifdef CONFIG_MMC_DEBUG + mmc_omap_report_irq(host, status); +#endif + if ((status & CMD_TIMEOUT) || + (status & CMD_CRC)) { + if (host->cmd) { + if (status & CMD_TIMEOUT) { + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, + SYSCTL) | SRC); + while (OMAP_HSMMC_READ(host->base, + SYSCTL) & SRC) + ; + + host->cmd->error = -ETIMEDOUT; + } else { + host->cmd->error = -EILSEQ; + } + end_cmd = 1; + } + if (host->data) + mmc_dma_cleanup(host); + } + if ((status & DATA_TIMEOUT) || + (status & DATA_CRC)) { + if (host->data) { + if (status & DATA_TIMEOUT) + mmc_dma_cleanup(host); + else + host->data->error = -EILSEQ; + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, + SYSCTL) | SRD); + while (OMAP_HSMMC_READ(host->base, + SYSCTL) & SRD) + ; + end_trans = 1; + } + } + if (status & CARD_ERR) { + dev_dbg(mmc_dev(host->mmc), + "Ignoring card err CMD%d\n", host->cmd->opcode); + if (host->cmd) + end_cmd = 1; + if (host->data) + end_trans = 1; + } + } + + OMAP_HSMMC_WRITE(host->base, STAT, status); + + if (end_cmd || (status & CC)) + mmc_omap_cmd_done(host, host->cmd); + if (end_trans || (status & TC)) + mmc_omap_xfer_done(host, data); + + return IRQ_HANDLED; +} + +/* + * Switch MMC operating voltage + */ +static int omap_mmc_switch_opcond(struct mmc_omap_host *host, int vdd) +{ + u32 reg_val = 0; + int ret; + + /* Disable the clocks */ + clk_disable(host->fclk); + clk_disable(host->iclk); + clk_disable(host->dbclk); + + /* Turn the power off */ + ret = mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); + if (ret != 0) + goto err; + + /* Turn the power ON with given VDD 1.8 or 3.0v */ + ret = mmc_slot(host).set_power(host->dev, host->slot_id, 1, vdd); + if (ret != 0) + goto err; + + clk_enable(host->fclk); + clk_enable(host->iclk); + clk_enable(host->dbclk); + + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) & SDVSCLR); + reg_val = OMAP_HSMMC_READ(host->base, HCTL); + /* + * If a MMC dual voltage card is detected, the set_ios fn calls + * this fn with VDD bit set for 1.8V. Upon card removal from the + * slot, omap_mmc_set_ios sets the VDD back to 3V on MMC_POWER_OFF. + * + * Only MMC1 supports 3.0V. MMC2 will not function if SDVS30 is + * set in HCTL. + */ + if (host->id == OMAP_MMC1_DEVID && (((1 << vdd) == MMC_VDD_32_33) || + ((1 << vdd) == MMC_VDD_33_34))) + reg_val |= SDVS30; + if ((1 << vdd) == MMC_VDD_165_195) + reg_val |= SDVS18; + + OMAP_HSMMC_WRITE(host->base, HCTL, reg_val); + + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) | SDBP); + + return 0; +err: + dev_dbg(mmc_dev(host->mmc), "Unable to switch operating voltage\n"); + return ret; +} + +/* + * Work Item to notify the core about card insertion/removal + */ +static void mmc_omap_detect(struct work_struct *work) +{ + struct mmc_omap_host *host = container_of(work, struct mmc_omap_host, + mmc_carddetect_work); + + sysfs_notify(&host->mmc->class_dev.kobj, NULL, "cover_switch"); + if (host->carddetect) { + mmc_detect_change(host->mmc, (HZ * 200) / 1000); + } else { + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) | SRD); + while (OMAP_HSMMC_READ(host->base, SYSCTL) & SRD) + ; + + mmc_detect_change(host->mmc, (HZ * 50) / 1000); + } +} + +/* + * ISR for handling card insertion and removal + */ +static irqreturn_t omap_mmc_cd_handler(int irq, void *dev_id) +{ + struct mmc_omap_host *host = (struct mmc_omap_host *)dev_id; + + host->carddetect = mmc_slot(host).card_detect(irq); + schedule_work(&host->mmc_carddetect_work); + + return IRQ_HANDLED; +} + +/* + * DMA call back function + */ +static void mmc_omap_dma_cb(int lch, u16 ch_status, void *data) +{ + struct mmc_omap_host *host = data; + + if (ch_status & OMAP2_DMA_MISALIGNED_ERR_IRQ) + dev_dbg(mmc_dev(host->mmc), "MISALIGNED_ADRS_ERR\n"); + + if (host->dma_ch < 0) + return; + + omap_free_dma(host->dma_ch); + host->dma_ch = -1; + /* + * DMA Callback: run in interrupt context. + * mutex_unlock will through a kernel warning if used. + */ + up(&host->sem); +} + +/* + * Configure dma src and destination parameters + */ +static int mmc_omap_config_dma_param(int sync_dir, struct mmc_omap_host *host, + struct mmc_data *data) +{ + if (sync_dir == 0) { + omap_set_dma_dest_params(host->dma_ch, 0, + OMAP_DMA_AMODE_CONSTANT, + (host->mapbase + OMAP_HSMMC_DATA), 0, 0); + omap_set_dma_src_params(host->dma_ch, 0, + OMAP_DMA_AMODE_POST_INC, + sg_dma_address(&data->sg[0]), 0, 0); + } else { + omap_set_dma_src_params(host->dma_ch, 0, + OMAP_DMA_AMODE_CONSTANT, + (host->mapbase + OMAP_HSMMC_DATA), 0, 0); + omap_set_dma_dest_params(host->dma_ch, 0, + OMAP_DMA_AMODE_POST_INC, + sg_dma_address(&data->sg[0]), 0, 0); + } + return 0; +} +/* + * Routine to configure and start DMA for the MMC card + */ +static int +mmc_omap_start_dma_transfer(struct mmc_omap_host *host, struct mmc_request *req) +{ + int sync_dev, sync_dir = 0; + int dma_ch = 0, ret = 0, err = 1; + struct mmc_data *data = req->data; + + /* + * If for some reason the DMA transfer is still active, + * we wait for timeout period and free the dma + */ + if (host->dma_ch != -1) { + set_current_state(TASK_UNINTERRUPTIBLE); + schedule_timeout(100); + if (down_trylock(&host->sem)) { + omap_free_dma(host->dma_ch); + host->dma_ch = -1; + up(&host->sem); + return err; + } + } else { + if (down_trylock(&host->sem)) + return err; + } + + if (!(data->flags & MMC_DATA_WRITE)) { + host->dma_dir = DMA_FROM_DEVICE; + if (host->id == OMAP_MMC1_DEVID) + sync_dev = OMAP24XX_DMA_MMC1_RX; + else + sync_dev = OMAP24XX_DMA_MMC2_RX; + } else { + host->dma_dir = DMA_TO_DEVICE; + if (host->id == OMAP_MMC1_DEVID) + sync_dev = OMAP24XX_DMA_MMC1_TX; + else + sync_dev = OMAP24XX_DMA_MMC2_TX; + } + + ret = omap_request_dma(sync_dev, "MMC/SD", mmc_omap_dma_cb, + host, &dma_ch); + if (ret != 0) { + dev_dbg(mmc_dev(host->mmc), + "%s: omap_request_dma() failed with %d\n", + mmc_hostname(host->mmc), ret); + return ret; + } + + host->dma_len = dma_map_sg(mmc_dev(host->mmc), data->sg, + data->sg_len, host->dma_dir); + host->dma_ch = dma_ch; + + if (!(data->flags & MMC_DATA_WRITE)) + mmc_omap_config_dma_param(1, host, data); + else + mmc_omap_config_dma_param(0, host, data); + + if ((data->blksz % 4) == 0) + omap_set_dma_transfer_params(dma_ch, OMAP_DMA_DATA_TYPE_S32, + (data->blksz / 4), data->blocks, OMAP_DMA_SYNC_FRAME, + sync_dev, sync_dir); + else + /* REVISIT: The MMC buffer increments only when MSB is written. + * Return error for blksz which is non multiple of four. + */ + return -EINVAL; + + omap_start_dma(dma_ch); + return 0; +} + +static void set_data_timeout(struct mmc_omap_host *host, + struct mmc_request *req) +{ + unsigned int timeout, cycle_ns; + uint32_t reg, clkd, dto = 0; + + reg = OMAP_HSMMC_READ(host->base, SYSCTL); + clkd = (reg & CLKD_MASK) >> CLKD_SHIFT; + if (clkd == 0) + clkd = 1; + + cycle_ns = 1000000000 / (clk_get_rate(host->fclk) / clkd); + timeout = req->data->timeout_ns / cycle_ns; + timeout += req->data->timeout_clks; + if (timeout) { + while ((timeout & 0x80000000) == 0) { + dto += 1; + timeout <<= 1; + } + dto = 31 - dto; + timeout <<= 1; + if (timeout && dto) + dto += 1; + if (dto >= 13) + dto -= 13; + else + dto = 0; + if (dto > 14) + dto = 14; + } + + reg &= ~DTO_MASK; + reg |= dto << DTO_SHIFT; + OMAP_HSMMC_WRITE(host->base, SYSCTL, reg); +} + +/* + * Configure block length for MMC/SD cards and initiate the transfer. + */ +static int +mmc_omap_prepare_data(struct mmc_omap_host *host, struct mmc_request *req) +{ + int ret; + host->data = req->data; + + if (req->data == NULL) { + host->datadir = OMAP_MMC_DATADIR_NONE; + OMAP_HSMMC_WRITE(host->base, BLK, 0); + return 0; + } + + OMAP_HSMMC_WRITE(host->base, BLK, (req->data->blksz) + | (req->data->blocks << 16)); + set_data_timeout(host, req); + + host->datadir = (req->data->flags & MMC_DATA_WRITE) ? + OMAP_MMC_DATADIR_WRITE : OMAP_MMC_DATADIR_READ; + + if (host->use_dma) { + ret = mmc_omap_start_dma_transfer(host, req); + if (ret != 0) { + dev_dbg(mmc_dev(host->mmc), "MMC start dma failure\n"); + return ret; + } + } + return 0; +} + +/* + * Request function. for read/write operation + */ +static void omap_mmc_request(struct mmc_host *mmc, struct mmc_request *req) +{ + struct mmc_omap_host *host = mmc_priv(mmc); + + WARN_ON(host->mrq != NULL); + host->mrq = req; + mmc_omap_prepare_data(host, req); + mmc_omap_start_command(host, req->cmd, req->data); +} + + +/* Routine to configure clock values. Exposed API to core */ +static void omap_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) +{ + struct mmc_omap_host *host = mmc_priv(mmc); + u16 dsor = 0; + unsigned long regval; + unsigned long timeout; + + switch (ios->power_mode) { + case MMC_POWER_OFF: + mmc_slot(host).set_power(host->dev, host->slot_id, 0, 0); + /* + * Reset bus voltage to 3V if it got set to 1.8V earlier. + * REVISIT: If we are able to detect cards after unplugging + * a 1.8V card, this code should not be needed. + */ + if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) { + int vdd = fls(host->mmc->ocr_avail) - 1; + if (omap_mmc_switch_opcond(host, vdd) != 0) + host->mmc->ios.vdd = vdd; + } + break; + case MMC_POWER_UP: + mmc_slot(host).set_power(host->dev, host->slot_id, 1, ios->vdd); + break; + } + + switch (mmc->ios.bus_width) { + case MMC_BUS_WIDTH_4: + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) | FOUR_BIT); + break; + case MMC_BUS_WIDTH_1: + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) & ~FOUR_BIT); + break; + } + + if (host->id == OMAP_MMC1_DEVID) { + /* Only MMC1 can operate at 3V/1.8V */ + if ((OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET) && + (ios->vdd == DUAL_VOLT_OCR_BIT)) { + /* + * The mmc_select_voltage fn of the core does + * not seem to set the power_mode to + * MMC_POWER_UP upon recalculating the voltage. + * vdd 1.8v. + */ + if (omap_mmc_switch_opcond(host, ios->vdd) != 0) + dev_dbg(mmc_dev(host->mmc), + "Switch operation failed\n"); + } + } + + if (ios->clock) { + dsor = OMAP_MMC_MASTER_CLOCK / ios->clock; + if (dsor < 1) + dsor = 1; + + if (OMAP_MMC_MASTER_CLOCK / dsor > ios->clock) + dsor++; + + if (dsor > 250) + dsor = 250; + } + omap_mmc_stop_clock(host); + regval = OMAP_HSMMC_READ(host->base, SYSCTL); + regval = regval & ~(CLKD_MASK); + regval = regval | (dsor << 6) | (DTO << 16); + OMAP_HSMMC_WRITE(host->base, SYSCTL, regval); + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) | ICE); + + /* Wait till the ICS bit is set */ + timeout = jiffies + msecs_to_jiffies(MMC_TIMEOUT_MS); + while ((OMAP_HSMMC_READ(host->base, SYSCTL) & ICS) != 0x2 + && time_before(jiffies, timeout)) + msleep(1); + + OMAP_HSMMC_WRITE(host->base, SYSCTL, + OMAP_HSMMC_READ(host->base, SYSCTL) | CEN); + + if (ios->power_mode == MMC_POWER_ON) + send_init_stream(host); + + if (ios->bus_mode == MMC_BUSMODE_OPENDRAIN) + OMAP_HSMMC_WRITE(host->base, CON, + OMAP_HSMMC_READ(host->base, CON) | OD); +} + +static int omap_hsmmc_get_cd(struct mmc_host *mmc) +{ + struct mmc_omap_host *host = mmc_priv(mmc); + struct omap_mmc_platform_data *pdata = host->pdata; + + if (!pdata->slots[0].card_detect) + return -ENOSYS; + return pdata->slots[0].card_detect(pdata->slots[0].card_detect_irq); +} + +static int omap_hsmmc_get_ro(struct mmc_host *mmc) +{ + struct mmc_omap_host *host = mmc_priv(mmc); + struct omap_mmc_platform_data *pdata = host->pdata; + + if (!pdata->slots[0].get_ro) + return -ENOSYS; + return pdata->slots[0].get_ro(host->dev, 0); +} + +static struct mmc_host_ops mmc_omap_ops = { + .request = omap_mmc_request, + .set_ios = omap_mmc_set_ios, + .get_cd = omap_hsmmc_get_cd, + .get_ro = omap_hsmmc_get_ro, + /* NYET -- enable_sdio_irq */ +}; + +static int __init omap_mmc_probe(struct platform_device *pdev) +{ + struct omap_mmc_platform_data *pdata = pdev->dev.platform_data; + struct mmc_host *mmc; + struct mmc_omap_host *host = NULL; + struct resource *res; + int ret = 0, irq; + u32 hctl, capa; + + if (pdata == NULL) { + dev_err(&pdev->dev, "Platform Data is missing\n"); + return -ENXIO; + } + + if (pdata->nr_slots == 0) { + dev_err(&pdev->dev, "No Slots\n"); + return -ENXIO; + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + irq = platform_get_irq(pdev, 0); + if (res == NULL || irq < 0) + return -ENXIO; + + res = request_mem_region(res->start, res->end - res->start + 1, + pdev->name); + if (res == NULL) + return -EBUSY; + + mmc = mmc_alloc_host(sizeof(struct mmc_omap_host), &pdev->dev); + if (!mmc) { + ret = -ENOMEM; + goto err; + } + + host = mmc_priv(mmc); + host->mmc = mmc; + host->pdata = pdata; + host->dev = &pdev->dev; + host->use_dma = 1; + host->dev->dma_mask = &pdata->dma_mask; + host->dma_ch = -1; + host->irq = irq; + host->id = pdev->id; + host->slot_id = 0; + host->mapbase = res->start; + host->base = ioremap(host->mapbase, SZ_4K); + + platform_set_drvdata(pdev, host); + INIT_WORK(&host->mmc_carddetect_work, mmc_omap_detect); + + mmc->ops = &mmc_omap_ops; + mmc->f_min = 400000; + mmc->f_max = 52000000; + + sema_init(&host->sem, 1); + + host->iclk = clk_get(&pdev->dev, "mmchs_ick"); + if (IS_ERR(host->iclk)) { + ret = PTR_ERR(host->iclk); + host->iclk = NULL; + goto err1; + } + host->fclk = clk_get(&pdev->dev, "mmchs_fck"); + if (IS_ERR(host->fclk)) { + ret = PTR_ERR(host->fclk); + host->fclk = NULL; + clk_put(host->iclk); + goto err1; + } + + if (clk_enable(host->fclk) != 0) { + clk_put(host->iclk); + clk_put(host->fclk); + goto err1; + } + + if (clk_enable(host->iclk) != 0) { + clk_disable(host->fclk); + clk_put(host->iclk); + clk_put(host->fclk); + goto err1; + } + + host->dbclk = clk_get(&pdev->dev, "mmchsdb_fck"); + /* + * MMC can still work without debounce clock. + */ + if (IS_ERR(host->dbclk)) + dev_warn(mmc_dev(host->mmc), "Failed to get debounce clock\n"); + else + if (clk_enable(host->dbclk) != 0) + dev_dbg(mmc_dev(host->mmc), "Enabling debounce" + " clk failed\n"); + else + host->dbclk_enabled = 1; + +#ifdef CONFIG_MMC_BLOCK_BOUNCE + mmc->max_phys_segs = 1; + mmc->max_hw_segs = 1; +#endif + mmc->max_blk_size = 512; /* Block Length at max can be 1024 */ + mmc->max_blk_count = 0xFFFF; /* No. of Blocks is 16 bits */ + mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count; + mmc->max_seg_size = mmc->max_req_size; + + mmc->ocr_avail = mmc_slot(host).ocr_mask; + mmc->caps |= MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED; + + if (pdata->slots[host->slot_id].wires >= 4) + mmc->caps |= MMC_CAP_4_BIT_DATA; + + /* Only MMC1 supports 3.0V */ + if (host->id == OMAP_MMC1_DEVID) { + hctl = SDVS30; + capa = VS30 | VS18; + } else { + hctl = SDVS18; + capa = VS18; + } + + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) | hctl); + + OMAP_HSMMC_WRITE(host->base, CAPA, + OMAP_HSMMC_READ(host->base, CAPA) | capa); + + /* Set the controller to AUTO IDLE mode */ + OMAP_HSMMC_WRITE(host->base, SYSCONFIG, + OMAP_HSMMC_READ(host->base, SYSCONFIG) | AUTOIDLE); + + /* Set SD bus power bit */ + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) | SDBP); + + /* Request IRQ for MMC operations */ + ret = request_irq(host->irq, mmc_omap_irq, IRQF_DISABLED, + mmc_hostname(mmc), host); + if (ret) { + dev_dbg(mmc_dev(host->mmc), "Unable to grab HSMMC IRQ\n"); + goto err_irq; + } + + if (pdata->init != NULL) { + if (pdata->init(&pdev->dev) != 0) { + dev_dbg(mmc_dev(host->mmc), + "Unable to configure MMC IRQs\n"); + goto err_irq_cd_init; + } + } + + /* Request IRQ for card detect */ + if ((mmc_slot(host).card_detect_irq) && (mmc_slot(host).card_detect)) { + ret = request_irq(mmc_slot(host).card_detect_irq, + omap_mmc_cd_handler, + IRQF_TRIGGER_RISING | IRQF_TRIGGER_FALLING + | IRQF_DISABLED, + mmc_hostname(mmc), host); + if (ret) { + dev_dbg(mmc_dev(host->mmc), + "Unable to grab MMC CD IRQ\n"); + goto err_irq_cd; + } + } + + OMAP_HSMMC_WRITE(host->base, ISE, INT_EN_MASK); + OMAP_HSMMC_WRITE(host->base, IE, INT_EN_MASK); + + mmc_add_host(mmc); + + if (host->pdata->slots[host->slot_id].name != NULL) { + ret = device_create_file(&mmc->class_dev, &dev_attr_slot_name); + if (ret < 0) + goto err_slot_name; + } + if (mmc_slot(host).card_detect_irq && mmc_slot(host).card_detect && + host->pdata->slots[host->slot_id].get_cover_state) { + ret = device_create_file(&mmc->class_dev, + &dev_attr_cover_switch); + if (ret < 0) + goto err_cover_switch; + } + + return 0; + +err_cover_switch: + device_remove_file(&mmc->class_dev, &dev_attr_cover_switch); +err_slot_name: + mmc_remove_host(mmc); +err_irq_cd: + free_irq(mmc_slot(host).card_detect_irq, host); +err_irq_cd_init: + free_irq(host->irq, host); +err_irq: + clk_disable(host->fclk); + clk_disable(host->iclk); + clk_put(host->fclk); + clk_put(host->iclk); + if (host->dbclk_enabled) { + clk_disable(host->dbclk); + clk_put(host->dbclk); + } + +err1: + iounmap(host->base); +err: + dev_dbg(mmc_dev(host->mmc), "Probe Failed\n"); + release_mem_region(res->start, res->end - res->start + 1); + if (host) + mmc_free_host(mmc); + return ret; +} + +static int omap_mmc_remove(struct platform_device *pdev) +{ + struct mmc_omap_host *host = platform_get_drvdata(pdev); + struct resource *res; + + if (host) { + mmc_remove_host(host->mmc); + if (host->pdata->cleanup) + host->pdata->cleanup(&pdev->dev); + free_irq(host->irq, host); + if (mmc_slot(host).card_detect_irq) + free_irq(mmc_slot(host).card_detect_irq, host); + flush_scheduled_work(); + + clk_disable(host->fclk); + clk_disable(host->iclk); + clk_put(host->fclk); + clk_put(host->iclk); + if (host->dbclk_enabled) { + clk_disable(host->dbclk); + clk_put(host->dbclk); + } + + mmc_free_host(host->mmc); + iounmap(host->base); + } + + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (res) + release_mem_region(res->start, res->end - res->start + 1); + platform_set_drvdata(pdev, NULL); + + return 0; +} + +#ifdef CONFIG_PM +static int omap_mmc_suspend(struct platform_device *pdev, pm_message_t state) +{ + int ret = 0; + struct mmc_omap_host *host = platform_get_drvdata(pdev); + + if (host && host->suspended) + return 0; + + if (host) { + ret = mmc_suspend_host(host->mmc, state); + if (ret == 0) { + host->suspended = 1; + + OMAP_HSMMC_WRITE(host->base, ISE, 0); + OMAP_HSMMC_WRITE(host->base, IE, 0); + + if (host->pdata->suspend) { + ret = host->pdata->suspend(&pdev->dev, + host->slot_id); + if (ret) + dev_dbg(mmc_dev(host->mmc), + "Unable to handle MMC board" + " level suspend\n"); + } + + if (!(OMAP_HSMMC_READ(host->base, HCTL) & SDVSDET)) { + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) + & SDVSCLR); + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) + | SDVS30); + OMAP_HSMMC_WRITE(host->base, HCTL, + OMAP_HSMMC_READ(host->base, HCTL) + | SDBP); + } + + clk_disable(host->fclk); + clk_disable(host->iclk); + clk_disable(host->dbclk); + } + + } + return ret; +} + +/* Routine to resume the MMC device */ +static int omap_mmc_resume(struct platform_device *pdev) +{ + int ret = 0; + struct mmc_omap_host *host = platform_get_drvdata(pdev); + + if (host && !host->suspended) + return 0; + + if (host) { + + ret = clk_enable(host->fclk); + if (ret) + goto clk_en_err; + + ret = clk_enable(host->iclk); + if (ret) { + clk_disable(host->fclk); + clk_put(host->fclk); + goto clk_en_err; + } + + if (clk_enable(host->dbclk) != 0) + dev_dbg(mmc_dev(host->mmc), + "Enabling debounce clk failed\n"); + + if (host->pdata->resume) { + ret = host->pdata->resume(&pdev->dev, host->slot_id); + if (ret) + dev_dbg(mmc_dev(host->mmc), + "Unmask interrupt failed\n"); + } + + /* Notify the core to resume the host */ + ret = mmc_resume_host(host->mmc); + if (ret == 0) + host->suspended = 0; + } + + return ret; + +clk_en_err: + dev_dbg(mmc_dev(host->mmc), + "Failed to enable MMC clocks during resume\n"); + return ret; +} + +#else +#define omap_mmc_suspend NULL +#define omap_mmc_resume NULL +#endif + +static struct platform_driver omap_mmc_driver = { + .probe = omap_mmc_probe, + .remove = omap_mmc_remove, + .suspend = omap_mmc_suspend, + .resume = omap_mmc_resume, + .driver = { + .name = DRIVER_NAME, + .owner = THIS_MODULE, + }, +}; + +static int __init omap_mmc_init(void) +{ + /* Register the MMC driver */ + return platform_driver_register(&omap_mmc_driver); +} + +static void __exit omap_mmc_cleanup(void) +{ + /* Unregister MMC driver */ + platform_driver_unregister(&omap_mmc_driver); +} + +module_init(omap_mmc_init); +module_exit(omap_mmc_cleanup); + +MODULE_DESCRIPTION("OMAP High Speed Multimedia Card driver"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:" DRIVER_NAME); +MODULE_AUTHOR("Texas Instruments Inc"); diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index fcc98a4cce3..35a98eec741 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -20,7 +20,7 @@ #include <linux/irq.h> #include <linux/io.h> -#include <asm/dma.h> +#include <mach/dma.h> #include <mach/regs-sdi.h> #include <mach/regs-gpio.h> diff --git a/drivers/mtd/nand/fsl_elbc_nand.c b/drivers/mtd/nand/fsl_elbc_nand.c index 65929db2944..1f6eb257871 100644 --- a/drivers/mtd/nand/fsl_elbc_nand.c +++ b/drivers/mtd/nand/fsl_elbc_nand.c @@ -676,7 +676,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) dev_dbg(ctrl->dev, "fsl_elbc_init: nand->numchips = %d\n", chip->numchips); - dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %ld\n", + dev_dbg(ctrl->dev, "fsl_elbc_init: nand->chipsize = %lld\n", chip->chipsize); dev_dbg(ctrl->dev, "fsl_elbc_init: nand->pagemask = %8x\n", chip->pagemask); @@ -703,7 +703,7 @@ static int fsl_elbc_chip_init_tail(struct mtd_info *mtd) dev_dbg(ctrl->dev, "fsl_elbc_init: nand->ecc.layout = %p\n", chip->ecc.layout); dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->flags = %08x\n", mtd->flags); - dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %d\n", mtd->size); + dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->size = %lld\n", mtd->size); dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->erasesize = %d\n", mtd->erasesize); dev_dbg(ctrl->dev, "fsl_elbc_init: mtd->writesize = %d\n", @@ -932,8 +932,8 @@ static int __devinit fsl_elbc_chip_probe(struct fsl_elbc_ctrl *ctrl, #endif add_mtd_device(&priv->mtd); - printk(KERN_INFO "eLBC NAND device at 0x%zx, bank %d\n", - res.start, priv->bank); + printk(KERN_INFO "eLBC NAND device at 0x%llx, bank %d\n", + (unsigned long long)res.start, priv->bank); return 0; err: diff --git a/drivers/mtd/nand/pasemi_nand.c b/drivers/mtd/nand/pasemi_nand.c index 9bd6c9ac844..a8b9376cf32 100644 --- a/drivers/mtd/nand/pasemi_nand.c +++ b/drivers/mtd/nand/pasemi_nand.c @@ -107,7 +107,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev, if (pasemi_nand_mtd) return -ENODEV; - pr_debug("pasemi_nand at %lx-%lx\n", res.start, res.end); + pr_debug("pasemi_nand at %llx-%llx\n", res.start, res.end); /* Allocate memory for MTD device structure and private data */ pasemi_nand_mtd = kzalloc(sizeof(struct mtd_info) + @@ -170,7 +170,7 @@ static int __devinit pasemi_nand_probe(struct of_device *ofdev, goto out_lpc; } - printk(KERN_INFO "PA Semi NAND flash at %08lx, control at I/O %x\n", + printk(KERN_INFO "PA Semi NAND flash at %08llx, control at I/O %x\n", res.start, lpcctl); return 0; diff --git a/drivers/mtd/onenand/omap2.c b/drivers/mtd/onenand/omap2.c index 96ecc1766fa..77a4f144615 100644 --- a/drivers/mtd/onenand/omap2.c +++ b/drivers/mtd/onenand/omap2.c @@ -629,7 +629,7 @@ static int __devinit omap2_onenand_probe(struct platform_device *pdev) } if (c->gpio_irq) { - if ((r = omap_request_gpio(c->gpio_irq)) < 0) { + if ((r = gpio_request(c->gpio_irq, "OneNAND irq")) < 0) { dev_err(&pdev->dev, "Failed to request GPIO%d for " "OneNAND\n", c->gpio_irq); goto err_iounmap; @@ -726,7 +726,7 @@ err_release_dma: free_irq(gpio_to_irq(c->gpio_irq), c); err_release_gpio: if (c->gpio_irq) - omap_free_gpio(c->gpio_irq); + gpio_free(c->gpio_irq); err_iounmap: iounmap(c->onenand.base); err_release_mem_region: @@ -761,7 +761,7 @@ static int __devexit omap2_onenand_remove(struct platform_device *pdev) platform_set_drvdata(pdev, NULL); if (c->gpio_irq) { free_irq(gpio_to_irq(c->gpio_irq), c); - omap_free_gpio(c->gpio_irq); + gpio_free(c->gpio_irq); } iounmap(c->onenand.base); release_mem_region(c->phys_base, ONENAND_IO_SIZE); diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig index 9fe8cb7d43a..6bdfd47d679 100644 --- a/drivers/net/Kconfig +++ b/drivers/net/Kconfig @@ -1829,7 +1829,7 @@ config 68360_ENET config FEC bool "FEC ethernet controller (of ColdFire CPUs)" - depends on M523x || M527x || M5272 || M528x || M520x + depends on M523x || M527x || M5272 || M528x || M520x || M532x help Say Y here if you want to use the built-in 10/100 Fast ethernet controller on some Motorola ColdFire processors. diff --git a/drivers/net/arm/am79c961a.c b/drivers/net/arm/am79c961a.c index 0c628a9e533..c2d012fcc29 100644 --- a/drivers/net/arm/am79c961a.c +++ b/drivers/net/arm/am79c961a.c @@ -208,9 +208,9 @@ am79c961_init_for_open(struct net_device *dev) /* * Stop the chip. */ - spin_lock_irqsave(priv->chip_lock, flags); + spin_lock_irqsave(&priv->chip_lock, flags); write_rreg (dev->base_addr, CSR0, CSR0_BABL|CSR0_CERR|CSR0_MISS|CSR0_MERR|CSR0_TINT|CSR0_RINT|CSR0_STOP); - spin_unlock_irqrestore(priv->chip_lock, flags); + spin_unlock_irqrestore(&priv->chip_lock, flags); write_ireg (dev->base_addr, 5, 0x00a0); /* Receive address LED */ write_ireg (dev->base_addr, 6, 0x0081); /* Collision LED */ @@ -332,10 +332,10 @@ am79c961_close(struct net_device *dev) netif_stop_queue(dev); netif_carrier_off(dev); - spin_lock_irqsave(priv->chip_lock, flags); + spin_lock_irqsave(&priv->chip_lock, flags); write_rreg (dev->base_addr, CSR0, CSR0_STOP); write_rreg (dev->base_addr, CSR3, CSR3_MASKALL); - spin_unlock_irqrestore(priv->chip_lock, flags); + spin_unlock_irqrestore(&priv->chip_lock, flags); free_irq (dev->irq, dev); @@ -391,7 +391,7 @@ static void am79c961_setmulticastlist (struct net_device *dev) am79c961_mc_hash(dmi, multi_hash); } - spin_lock_irqsave(priv->chip_lock, flags); + spin_lock_irqsave(&priv->chip_lock, flags); stopped = read_rreg(dev->base_addr, CSR0) & CSR0_STOP; @@ -405,9 +405,9 @@ static void am79c961_setmulticastlist (struct net_device *dev) * Spin waiting for chip to report suspend mode */ while ((read_rreg(dev->base_addr, CTRL1) & CTRL1_SPND) == 0) { - spin_unlock_irqrestore(priv->chip_lock, flags); + spin_unlock_irqrestore(&priv->chip_lock, flags); nop(); - spin_lock_irqsave(priv->chip_lock, flags); + spin_lock_irqsave(&priv->chip_lock, flags); } } @@ -429,7 +429,7 @@ static void am79c961_setmulticastlist (struct net_device *dev) write_rreg(dev->base_addr, CTRL1, 0); } - spin_unlock_irqrestore(priv->chip_lock, flags); + spin_unlock_irqrestore(&priv->chip_lock, flags); } static void am79c961_timeout(struct net_device *dev) @@ -467,10 +467,10 @@ am79c961_sendpacket(struct sk_buff *skb, struct net_device *dev) am_writeword (dev, hdraddr + 2, TMD_OWN|TMD_STP|TMD_ENP); priv->txhead = head; - spin_lock_irqsave(priv->chip_lock, flags); + spin_lock_irqsave(&priv->chip_lock, flags); write_rreg (dev->base_addr, CSR0, CSR0_TDMD|CSR0_IENA); dev->trans_start = jiffies; - spin_unlock_irqrestore(priv->chip_lock, flags); + spin_unlock_irqrestore(&priv->chip_lock, flags); /* * If the next packet is owned by the ethernet device, diff --git a/drivers/net/bnx2x.h b/drivers/net/bnx2x.h index 6fcccef4cf3..15a5cf0f676 100644 --- a/drivers/net/bnx2x.h +++ b/drivers/net/bnx2x.h @@ -1,6 +1,6 @@ /* bnx2x.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2008 Broadcom Corporation + * Copyright (c) 2007-2009 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -271,14 +271,7 @@ struct bnx2x_fastpath { #define bnx2x_fp(bp, nr, var) (bp->fp[nr].var) -#define BNX2X_HAS_TX_WORK(fp) \ - ((fp->tx_pkt_prod != le16_to_cpu(*fp->tx_cons_sb)) || \ - (fp->tx_pkt_prod != fp->tx_pkt_cons)) - -#define BNX2X_HAS_RX_WORK(fp) \ - (fp->rx_comp_cons != rx_cons_sb) - -#define BNX2X_HAS_WORK(fp) (BNX2X_HAS_RX_WORK(fp) || BNX2X_HAS_TX_WORK(fp)) +#define BNX2X_HAS_WORK(fp) (bnx2x_has_rx_work(fp) || bnx2x_has_tx_work(fp)) /* MC hsi */ diff --git a/drivers/net/bnx2x_link.c b/drivers/net/bnx2x_link.c index fefa6ab1306..aea26b4dc45 100644 --- a/drivers/net/bnx2x_link.c +++ b/drivers/net/bnx2x_link.c @@ -1,4 +1,4 @@ -/* Copyright 2008 Broadcom Corporation +/* Copyright 2008-2009 Broadcom Corporation * * Unless you and Broadcom execute a separate written software license * agreement governing use of this software, this software is licensed to you @@ -317,6 +317,9 @@ static u8 bnx2x_emac_enable(struct link_params *params, val &= ~0x810; EMAC_WR(bp, EMAC_REG_EMAC_MODE, val); + /* enable emac */ + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 1); + /* enable emac for jumbo packets */ EMAC_WR(bp, EMAC_REG_EMAC_RX_MTU_SIZE, (EMAC_RX_MTU_SIZE_JUMBO_ENA | @@ -1609,7 +1612,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, u32 gp_status) { struct bnx2x *bp = params->bp; - + u16 new_line_speed; u8 rc = 0; vars->link_status = 0; @@ -1629,7 +1632,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, switch (gp_status & GP_STATUS_SPEED_MASK) { case GP_STATUS_10M: - vars->line_speed = SPEED_10; + new_line_speed = SPEED_10; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_10TFD; else @@ -1637,7 +1640,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, break; case GP_STATUS_100M: - vars->line_speed = SPEED_100; + new_line_speed = SPEED_100; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_100TXFD; else @@ -1646,7 +1649,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, case GP_STATUS_1G: case GP_STATUS_1G_KX: - vars->line_speed = SPEED_1000; + new_line_speed = SPEED_1000; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_1000TFD; else @@ -1654,7 +1657,7 @@ static u8 bnx2x_link_settings_status(struct link_params *params, break; case GP_STATUS_2_5G: - vars->line_speed = SPEED_2500; + new_line_speed = SPEED_2500; if (vars->duplex == DUPLEX_FULL) vars->link_status |= LINK_2500TFD; else @@ -1671,32 +1674,32 @@ static u8 bnx2x_link_settings_status(struct link_params *params, case GP_STATUS_10G_KX4: case GP_STATUS_10G_HIG: case GP_STATUS_10G_CX4: - vars->line_speed = SPEED_10000; + new_line_speed = SPEED_10000; vars->link_status |= LINK_10GTFD; break; case GP_STATUS_12G_HIG: - vars->line_speed = SPEED_12000; + new_line_speed = SPEED_12000; vars->link_status |= LINK_12GTFD; break; case GP_STATUS_12_5G: - vars->line_speed = SPEED_12500; + new_line_speed = SPEED_12500; vars->link_status |= LINK_12_5GTFD; break; case GP_STATUS_13G: - vars->line_speed = SPEED_13000; + new_line_speed = SPEED_13000; vars->link_status |= LINK_13GTFD; break; case GP_STATUS_15G: - vars->line_speed = SPEED_15000; + new_line_speed = SPEED_15000; vars->link_status |= LINK_15GTFD; break; case GP_STATUS_16G: - vars->line_speed = SPEED_16000; + new_line_speed = SPEED_16000; vars->link_status |= LINK_16GTFD; break; @@ -1708,6 +1711,15 @@ static u8 bnx2x_link_settings_status(struct link_params *params, break; } + /* Upon link speed change set the NIG into drain mode. + Comes to deals with possible FIFO glitch due to clk change + when speed is decreased without link down indicator */ + if (new_line_speed != vars->line_speed) { + REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + + params->port*4, 0); + msleep(1); + } + vars->line_speed = new_line_speed; vars->link_status |= LINK_STATUS_SERDES_LINK; if ((params->req_line_speed == SPEED_AUTO_NEG) && @@ -3571,7 +3583,7 @@ static void bnx2x_set_xgxs_loopback(struct link_params *params, (MDIO_REG_BANK_CL73_IEEEB0 + (MDIO_CL73_IEEEB0_CL73_AN_CONTROL & 0xf)), 0x6041); - + msleep(200); /* set aer mmd back */ bnx2x_set_aer_mmd(params, vars); @@ -3870,9 +3882,15 @@ static u8 bnx2x_link_initialize(struct link_params *params, } if (vars->phy_flags & PHY_XGXS_FLAG) { - if (params->req_line_speed && + if ((params->req_line_speed && ((params->req_line_speed == SPEED_100) || - (params->req_line_speed == SPEED_10))) { + (params->req_line_speed == SPEED_10))) || + (!params->req_line_speed && + (params->speed_cap_mask >= + PORT_HW_CFG_SPEED_CAPABILITY_D0_10M_FULL) && + (params->speed_cap_mask < + PORT_HW_CFG_SPEED_CAPABILITY_D0_1G) + )) { vars->phy_flags |= PHY_SGMII_FLAG; } else { vars->phy_flags &= ~PHY_SGMII_FLAG; @@ -4194,6 +4212,11 @@ static u8 bnx2x_update_link_down(struct link_params *params, /* activate nig drain */ REG_WR(bp, NIG_REG_EGRESS_DRAIN0_MODE + port*4, 1); + /* disable emac */ + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); + + msleep(10); + /* reset BigMac */ bnx2x_bmac_rx_disable(bp, params->port); REG_WR(bp, GRCBASE_MISC + @@ -4238,6 +4261,7 @@ static u8 bnx2x_update_link_up(struct link_params *params, /* update shared memory */ bnx2x_update_mng(params, vars->link_status); + msleep(20); return rc; } /* This function should called upon link interrupt */ @@ -4276,6 +4300,9 @@ u8 bnx2x_link_update(struct link_params *params, struct link_vars *vars) REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK10G + port*0x68), REG_RD(bp, NIG_REG_XGXS0_STATUS_LINK_STATUS + port*0x68)); + /* disable emac */ + REG_WR(bp, NIG_REG_NIG_EMAC0_EN + port*4, 0); + ext_phy_type = XGXS_EXT_PHY_TYPE(params->ext_phy_config); /* Check external link change only for non-direct */ @@ -4377,10 +4404,11 @@ static u8 bnx2x_8073_common_init_phy(struct bnx2x *bp, u32 shmem_base) ext_phy_addr[port], MDIO_PMA_DEVAD, MDIO_PMA_REG_ROM_VER1, &fw_ver1); - if (fw_ver1 == 0) { + if (fw_ver1 == 0 || fw_ver1 == 0x4321) { DP(NETIF_MSG_LINK, - "bnx2x_8073_common_init_phy port %x " - "fw Download failed\n", port); + "bnx2x_8073_common_init_phy port %x:" + "Download failed. fw version = 0x%x\n", + port, fw_ver1); return -EINVAL; } diff --git a/drivers/net/bnx2x_main.c b/drivers/net/bnx2x_main.c index 7c533797c06..d3e7775a9cc 100644 --- a/drivers/net/bnx2x_main.c +++ b/drivers/net/bnx2x_main.c @@ -1,6 +1,6 @@ /* bnx2x_main.c: Broadcom Everest network driver. * - * Copyright (c) 2007-2008 Broadcom Corporation + * Copyright (c) 2007-2009 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by @@ -57,8 +57,8 @@ #include "bnx2x.h" #include "bnx2x_init.h" -#define DRV_MODULE_VERSION "1.45.23" -#define DRV_MODULE_RELDATE "2008/11/03" +#define DRV_MODULE_VERSION "1.45.26" +#define DRV_MODULE_RELDATE "2009/01/26" #define BNX2X_BC_VER 0x040200 /* Time in jiffies before concluding the transmitter is hung */ @@ -69,7 +69,7 @@ static char version[] __devinitdata = DRV_MODULE_NAME " " DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n"; MODULE_AUTHOR("Eliezer Tamir"); -MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710 Driver"); +MODULE_DESCRIPTION("Broadcom NetXtreme II BCM57710/57711/57711E Driver"); MODULE_LICENSE("GPL"); MODULE_VERSION(DRV_MODULE_VERSION); @@ -733,6 +733,24 @@ static u16 bnx2x_ack_int(struct bnx2x *bp) * fast path service functions */ +static inline int bnx2x_has_tx_work(struct bnx2x_fastpath *fp) +{ + u16 tx_cons_sb; + + /* Tell compiler that status block fields can change */ + barrier(); + tx_cons_sb = le16_to_cpu(*fp->tx_cons_sb); + return (fp->tx_pkt_cons != tx_cons_sb); +} + +static inline int bnx2x_has_tx_work_unload(struct bnx2x_fastpath *fp) +{ + /* Tell compiler that consumer and producer can change */ + barrier(); + return (fp->tx_pkt_prod != fp->tx_pkt_cons); + +} + /* free skb in the packet ring at pos idx * return idx of last bd freed */ @@ -5137,12 +5155,21 @@ static void enable_blocks_attention(struct bnx2x *bp) } +static void bnx2x_reset_common(struct bnx2x *bp) +{ + /* reset_common */ + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, + 0xd3ffff7f); + REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403); +} + static int bnx2x_init_common(struct bnx2x *bp) { u32 val, i; DP(BNX2X_MSG_MCP, "starting common init func %d\n", BP_FUNC(bp)); + bnx2x_reset_common(bp); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_SET, 0xffffffff); REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_SET, 0xfffc); @@ -6123,8 +6150,8 @@ static void bnx2x_netif_start(struct bnx2x *bp) static void bnx2x_netif_stop(struct bnx2x *bp, int disable_hw) { bnx2x_int_disable_sync(bp, disable_hw); + bnx2x_napi_disable(bp); if (netif_running(bp->dev)) { - bnx2x_napi_disable(bp); netif_tx_disable(bp->dev); bp->dev->trans_start = jiffies; /* prevent tx timeout */ } @@ -6144,7 +6171,7 @@ static void bnx2x_set_mac_addr_e1(struct bnx2x *bp, int set) * multicast 64-127:port0 128-191:port1 */ config->hdr.length_6b = 2; - config->hdr.offset = port ? 31 : 0; + config->hdr.offset = port ? 32 : 0; config->hdr.client_id = BP_CL_ID(bp); config->hdr.reserved1 = 0; @@ -6308,7 +6335,7 @@ static void bnx2x_set_rx_mode(struct net_device *dev); static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) { u32 load_code; - int i, rc; + int i, rc = 0; #ifdef BNX2X_STOP_ON_ERROR if (unlikely(bp->panic)) return -EPERM; @@ -6316,48 +6343,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) bp->state = BNX2X_STATE_OPENING_WAIT4_LOAD; - /* Send LOAD_REQUEST command to MCP - Returns the type of LOAD command: - if it is the first port to be initialized - common blocks should be initialized, otherwise - not - */ - if (!BP_NOMCP(bp)) { - load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ); - if (!load_code) { - BNX2X_ERR("MCP response failure, aborting\n"); - return -EBUSY; - } - if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) - return -EBUSY; /* other port in diagnostic mode */ - - } else { - int port = BP_PORT(bp); - - DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n", - load_count[0], load_count[1], load_count[2]); - load_count[0]++; - load_count[1 + port]++; - DP(NETIF_MSG_IFUP, "NO MCP new load counts %d, %d, %d\n", - load_count[0], load_count[1], load_count[2]); - if (load_count[0] == 1) - load_code = FW_MSG_CODE_DRV_LOAD_COMMON; - else if (load_count[1 + port] == 1) - load_code = FW_MSG_CODE_DRV_LOAD_PORT; - else - load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION; - } - - if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) || - (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) - bp->port.pmf = 1; - else - bp->port.pmf = 0; - DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf); - - /* if we can't use MSI-X we only need one fp, - * so try to enable MSI-X with the requested number of fp's - * and fallback to inta with one fp - */ if (use_inta) { bp->num_queues = 1; @@ -6372,7 +6357,15 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) else bp->num_queues = 1; - if (bnx2x_enable_msix(bp)) { + DP(NETIF_MSG_IFUP, + "set number of queues to %d\n", bp->num_queues); + + /* if we can't use MSI-X we only need one fp, + * so try to enable MSI-X with the requested number of fp's + * and fallback to MSI or legacy INTx with one fp + */ + rc = bnx2x_enable_msix(bp); + if (rc) { /* failed to enable MSI-X */ bp->num_queues = 1; if (use_multi) @@ -6380,8 +6373,6 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) " to enable MSI-X\n"); } } - DP(NETIF_MSG_IFUP, - "set number of queues to %d\n", bp->num_queues); if (bnx2x_alloc_mem(bp)) return -ENOMEM; @@ -6390,30 +6381,85 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) bnx2x_fp(bp, i, disable_tpa) = ((bp->flags & TPA_ENABLE_FLAG) == 0); + for_each_queue(bp, i) + netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi), + bnx2x_poll, 128); + +#ifdef BNX2X_STOP_ON_ERROR + for_each_queue(bp, i) { + struct bnx2x_fastpath *fp = &bp->fp[i]; + + fp->poll_no_work = 0; + fp->poll_calls = 0; + fp->poll_max_calls = 0; + fp->poll_complete = 0; + fp->poll_exit = 0; + } +#endif + bnx2x_napi_enable(bp); + if (bp->flags & USING_MSIX_FLAG) { rc = bnx2x_req_msix_irqs(bp); if (rc) { pci_disable_msix(bp->pdev); - goto load_error; + goto load_error1; } + printk(KERN_INFO PFX "%s: using MSI-X\n", bp->dev->name); } else { bnx2x_ack_int(bp); rc = bnx2x_req_irq(bp); if (rc) { - BNX2X_ERR("IRQ request failed, aborting\n"); - goto load_error; + BNX2X_ERR("IRQ request failed rc %d, aborting\n", rc); + goto load_error1; } } - for_each_queue(bp, i) - netif_napi_add(bp->dev, &bnx2x_fp(bp, i, napi), - bnx2x_poll, 128); + /* Send LOAD_REQUEST command to MCP + Returns the type of LOAD command: + if it is the first port to be initialized + common blocks should be initialized, otherwise - not + */ + if (!BP_NOMCP(bp)) { + load_code = bnx2x_fw_command(bp, DRV_MSG_CODE_LOAD_REQ); + if (!load_code) { + BNX2X_ERR("MCP response failure, aborting\n"); + rc = -EBUSY; + goto load_error2; + } + if (load_code == FW_MSG_CODE_DRV_LOAD_REFUSED) { + rc = -EBUSY; /* other port in diagnostic mode */ + goto load_error2; + } + + } else { + int port = BP_PORT(bp); + + DP(NETIF_MSG_IFUP, "NO MCP load counts before us %d, %d, %d\n", + load_count[0], load_count[1], load_count[2]); + load_count[0]++; + load_count[1 + port]++; + DP(NETIF_MSG_IFUP, "NO MCP new load counts %d, %d, %d\n", + load_count[0], load_count[1], load_count[2]); + if (load_count[0] == 1) + load_code = FW_MSG_CODE_DRV_LOAD_COMMON; + else if (load_count[1 + port] == 1) + load_code = FW_MSG_CODE_DRV_LOAD_PORT; + else + load_code = FW_MSG_CODE_DRV_LOAD_FUNCTION; + } + + if ((load_code == FW_MSG_CODE_DRV_LOAD_COMMON) || + (load_code == FW_MSG_CODE_DRV_LOAD_PORT)) + bp->port.pmf = 1; + else + bp->port.pmf = 0; + DP(NETIF_MSG_LINK, "pmf %d\n", bp->port.pmf); /* Initialize HW */ rc = bnx2x_init_hw(bp, load_code); if (rc) { BNX2X_ERR("HW init failed, aborting\n"); - goto load_int_disable; + goto load_error2; } /* Setup NIC internals and enable interrupts */ @@ -6425,7 +6471,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) if (!load_code) { BNX2X_ERR("MCP response failure, aborting\n"); rc = -EBUSY; - goto load_rings_free; + goto load_error3; } } @@ -6434,7 +6480,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) rc = bnx2x_setup_leading(bp); if (rc) { BNX2X_ERR("Setup leading failed!\n"); - goto load_netif_stop; + goto load_error3; } if (CHIP_IS_E1H(bp)) @@ -6447,7 +6493,7 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) for_each_nondefault_queue(bp, i) { rc = bnx2x_setup_multi(bp, i); if (rc) - goto load_netif_stop; + goto load_error3; } if (CHIP_IS_E1(bp)) @@ -6463,18 +6509,18 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) case LOAD_NORMAL: /* Tx queue should be only reenabled */ netif_wake_queue(bp->dev); + /* Initialize the receive filter. */ bnx2x_set_rx_mode(bp->dev); break; case LOAD_OPEN: netif_start_queue(bp->dev); + /* Initialize the receive filter. */ bnx2x_set_rx_mode(bp->dev); - if (bp->flags & USING_MSIX_FLAG) - printk(KERN_INFO PFX "%s: using MSI-X\n", - bp->dev->name); break; case LOAD_DIAG: + /* Initialize the receive filter. */ bnx2x_set_rx_mode(bp->dev); bp->state = BNX2X_STATE_DIAG; break; @@ -6492,20 +6538,25 @@ static int bnx2x_nic_load(struct bnx2x *bp, int load_mode) return 0; -load_netif_stop: - bnx2x_napi_disable(bp); -load_rings_free: +load_error3: + bnx2x_int_disable_sync(bp, 1); + if (!BP_NOMCP(bp)) { + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_REQ_WOL_MCP); + bnx2x_fw_command(bp, DRV_MSG_CODE_UNLOAD_DONE); + } + bp->port.pmf = 0; /* Free SKBs, SGEs, TPA pool and driver internals */ bnx2x_free_skbs(bp); for_each_queue(bp, i) bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); -load_int_disable: - bnx2x_int_disable_sync(bp, 1); +load_error2: /* Release IRQs */ bnx2x_free_irq(bp); -load_error: +load_error1: + bnx2x_napi_disable(bp); + for_each_queue(bp, i) + netif_napi_del(&bnx2x_fp(bp, i, napi)); bnx2x_free_mem(bp); - bp->port.pmf = 0; /* TBD we really need to reset the chip if we want to recover from this */ @@ -6578,6 +6629,7 @@ static int bnx2x_stop_leading(struct bnx2x *bp) } cnt--; msleep(1); + rmb(); /* Refresh the dsb_sp_prod */ } bp->state = BNX2X_STATE_CLOSING_WAIT4_UNLOAD; bp->fp[0].state = BNX2X_FP_STATE_CLOSED; @@ -6629,14 +6681,6 @@ static void bnx2x_reset_port(struct bnx2x *bp) /* TODO: Close Doorbell port? */ } -static void bnx2x_reset_common(struct bnx2x *bp) -{ - /* reset_common */ - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_1_CLEAR, - 0xd3ffff7f); - REG_WR(bp, GRCBASE_MISC + MISC_REGISTERS_RESET_REG_2_CLEAR, 0x1403); -} - static void bnx2x_reset_chip(struct bnx2x *bp, u32 reset_code) { DP(BNX2X_MSG_MCP, "function %d reset_code %x\n", @@ -6677,20 +6721,22 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) bnx2x_set_storm_rx_mode(bp); bnx2x_netif_stop(bp, 1); - if (!netif_running(bp->dev)) - bnx2x_napi_disable(bp); + del_timer_sync(&bp->timer); SHMEM_WR(bp, func_mb[BP_FUNC(bp)].drv_pulse_mb, (DRV_PULSE_ALWAYS_ALIVE | bp->fw_drv_pulse_wr_seq)); bnx2x_stats_handle(bp, STATS_EVENT_STOP); + /* Release IRQs */ + bnx2x_free_irq(bp); + /* Wait until tx fast path tasks complete */ for_each_queue(bp, i) { struct bnx2x_fastpath *fp = &bp->fp[i]; cnt = 1000; smp_rmb(); - while (BNX2X_HAS_TX_WORK(fp)) { + while (bnx2x_has_tx_work_unload(fp)) { bnx2x_tx_int(fp, 1000); if (!cnt) { @@ -6711,9 +6757,6 @@ static int bnx2x_nic_unload(struct bnx2x *bp, int unload_mode) /* Give HW time to discard old tx messages */ msleep(1); - /* Release IRQs */ - bnx2x_free_irq(bp); - if (CHIP_IS_E1(bp)) { struct mac_configuration_cmd *config = bnx2x_sp(bp, mcast_config); @@ -6822,6 +6865,8 @@ unload_error: bnx2x_free_skbs(bp); for_each_queue(bp, i) bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); + for_each_queue(bp, i) + netif_napi_del(&bnx2x_fp(bp, i, napi)); bnx2x_free_mem(bp); bp->state = BNX2X_STATE_CLOSED; @@ -6874,10 +6919,6 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) */ bnx2x_acquire_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); val = REG_RD(bp, DORQ_REG_NORM_CID_OFST); - if (val == 0x7) - REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); - bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); - if (val == 0x7) { u32 reset_code = DRV_MSG_CODE_UNLOAD_REQ_WOL_DIS; /* save our func */ @@ -6885,6 +6926,9 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) u32 swap_en; u32 swap_val; + /* clear the UNDI indication */ + REG_WR(bp, DORQ_REG_NORM_CID_OFST, 0); + BNX2X_DEV_INFO("UNDI is active! reset device\n"); /* try unload UNDI on port 0 */ @@ -6910,6 +6954,9 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) bnx2x_fw_command(bp, reset_code); } + /* now it's safe to release the lock */ + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); + REG_WR(bp, (BP_PORT(bp) ? HC_REG_CONFIG_1 : HC_REG_CONFIG_0), 0x1000); @@ -6954,7 +7001,9 @@ static void __devinit bnx2x_undi_unload(struct bnx2x *bp) bp->fw_seq = (SHMEM_RD(bp, func_mb[bp->func].drv_mb_header) & DRV_MSG_SEQ_NUMBER_MASK); - } + + } else + bnx2x_release_hw_lock(bp, HW_LOCK_RESOURCE_UNDI); } } @@ -6971,7 +7020,7 @@ static void __devinit bnx2x_get_common_hwinfo(struct bnx2x *bp) id |= ((val & 0xf) << 12); val = REG_RD(bp, MISC_REG_CHIP_METAL); id |= ((val & 0xff) << 4); - REG_RD(bp, MISC_REG_BOND_ID); + val = REG_RD(bp, MISC_REG_BOND_ID); id |= (val & 0xf); bp->common.chip_id = id; bp->link_params.chip_id = bp->common.chip_id; @@ -8103,6 +8152,9 @@ static int bnx2x_get_eeprom(struct net_device *dev, struct bnx2x *bp = netdev_priv(dev); int rc; + if (!netif_running(dev)) + return -EAGAIN; + DP(BNX2X_MSG_NVM, "ethtool_eeprom: cmd %d\n" DP_LEVEL " magic 0x%x offset 0x%x (%d) len 0x%x (%d)\n", eeprom->cmd, eeprom->magic, eeprom->offset, eeprom->offset, @@ -8705,18 +8757,17 @@ static int bnx2x_run_loopback(struct bnx2x *bp, int loopback_mode, u8 link_up) if (loopback_mode == BNX2X_MAC_LOOPBACK) { bp->link_params.loopback_mode = LOOPBACK_BMAC; - bnx2x_acquire_phy_lock(bp); bnx2x_phy_init(&bp->link_params, &bp->link_vars); - bnx2x_release_phy_lock(bp); } else if (loopback_mode == BNX2X_PHY_LOOPBACK) { + u16 cnt = 1000; bp->link_params.loopback_mode = LOOPBACK_XGXS_10; - bnx2x_acquire_phy_lock(bp); bnx2x_phy_init(&bp->link_params, &bp->link_vars); - bnx2x_release_phy_lock(bp); /* wait until link state is restored */ - bnx2x_wait_for_link(bp, link_up); - + if (link_up) + while (cnt-- && bnx2x_test_link(&bp->link_params, + &bp->link_vars)) + msleep(10); } else return -EINVAL; @@ -8822,6 +8873,7 @@ static int bnx2x_test_loopback(struct bnx2x *bp, u8 link_up) return BNX2X_LOOPBACK_FAILED; bnx2x_netif_stop(bp, 1); + bnx2x_acquire_phy_lock(bp); if (bnx2x_run_loopback(bp, BNX2X_MAC_LOOPBACK, link_up)) { DP(NETIF_MSG_PROBE, "MAC loopback failed\n"); @@ -8833,6 +8885,7 @@ static int bnx2x_test_loopback(struct bnx2x *bp, u8 link_up) rc |= BNX2X_PHY_LOOPBACK_FAILED; } + bnx2x_release_phy_lock(bp); bnx2x_netif_start(bp); return rc; @@ -8906,7 +8959,10 @@ static int bnx2x_test_intr(struct bnx2x *bp) return -ENODEV; config->hdr.length_6b = 0; - config->hdr.offset = 0; + if (CHIP_IS_E1(bp)) + config->hdr.offset = (BP_PORT(bp) ? 32 : 0); + else + config->hdr.offset = BP_FUNC(bp); config->hdr.client_id = BP_CL_ID(bp); config->hdr.reserved1 = 0; @@ -9271,6 +9327,18 @@ static int bnx2x_set_power_state(struct bnx2x *bp, pci_power_t state) return 0; } +static inline int bnx2x_has_rx_work(struct bnx2x_fastpath *fp) +{ + u16 rx_cons_sb; + + /* Tell compiler that status block fields can change */ + barrier(); + rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb); + if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT) + rx_cons_sb++; + return (fp->rx_comp_cons != rx_cons_sb); +} + /* * net_device service functions */ @@ -9281,7 +9349,6 @@ static int bnx2x_poll(struct napi_struct *napi, int budget) napi); struct bnx2x *bp = fp->bp; int work_done = 0; - u16 rx_cons_sb; #ifdef BNX2X_STOP_ON_ERROR if (unlikely(bp->panic)) @@ -9294,19 +9361,12 @@ static int bnx2x_poll(struct napi_struct *napi, int budget) bnx2x_update_fpsb_idx(fp); - if (BNX2X_HAS_TX_WORK(fp)) + if (bnx2x_has_tx_work(fp)) bnx2x_tx_int(fp, budget); - rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb); - if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT) - rx_cons_sb++; - if (BNX2X_HAS_RX_WORK(fp)) + if (bnx2x_has_rx_work(fp)) work_done = bnx2x_rx_int(fp, budget); - rmb(); /* BNX2X_HAS_WORK() reads the status block */ - rx_cons_sb = le16_to_cpu(*fp->rx_cons_sb); - if ((rx_cons_sb & MAX_RCQ_DESC_CNT) == MAX_RCQ_DESC_CNT) - rx_cons_sb++; /* must not complete if we consumed full budget */ if ((work_done < budget) && !BNX2X_HAS_WORK(fp)) { @@ -9417,6 +9477,7 @@ static inline u32 bnx2x_xmit_type(struct bnx2x *bp, struct sk_buff *skb) return rc; } +#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3) /* check if packet requires linearization (packet is too fragmented) */ static int bnx2x_pkt_req_lin(struct bnx2x *bp, struct sk_buff *skb, u32 xmit_type) @@ -9494,6 +9555,7 @@ exit_lbl: return to_copy; } +#endif /* called with netif_tx_lock * bnx2x_tx_int() runs without netif_tx_lock unless it needs to call @@ -9534,6 +9596,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) skb->ip_summed, skb->protocol, ipv6_hdr(skb)->nexthdr, ip_hdr(skb)->protocol, skb_shinfo(skb)->gso_type, xmit_type); +#if (MAX_SKB_FRAGS >= MAX_FETCH_BD - 3) /* First, check if we need to linearize the skb (due to FW restrictions) */ if (bnx2x_pkt_req_lin(bp, skb, xmit_type)) { @@ -9546,6 +9609,7 @@ static int bnx2x_start_xmit(struct sk_buff *skb, struct net_device *dev) return NETDEV_TX_OK; } } +#endif /* Please read carefully. First we use one BD which we mark as start, @@ -9776,6 +9840,8 @@ static int bnx2x_open(struct net_device *dev) { struct bnx2x *bp = netdev_priv(dev); + netif_carrier_off(dev); + bnx2x_set_power_state(bp, PCI_D0); return bnx2x_nic_load(bp, LOAD_OPEN); @@ -9859,7 +9925,7 @@ static void bnx2x_set_rx_mode(struct net_device *dev) for (; i < old; i++) { if (CAM_IS_INVALID(config-> config_table[i])) { - i--; /* already invalidated */ + /* already invalidated */ break; } /* invalidate */ @@ -10269,22 +10335,18 @@ static int __devinit bnx2x_init_one(struct pci_dev *pdev, return rc; } - rc = register_netdev(dev); - if (rc) { - dev_err(&pdev->dev, "Cannot register net device\n"); - goto init_one_exit; - } - pci_set_drvdata(pdev, dev); rc = bnx2x_init_bp(bp); + if (rc) + goto init_one_exit; + + rc = register_netdev(dev); if (rc) { - unregister_netdev(dev); + dev_err(&pdev->dev, "Cannot register net device\n"); goto init_one_exit; } - netif_carrier_off(dev); - bp->common.name = board_info[ent->driver_data].name; printk(KERN_INFO "%s: %s (%c%d) PCI-E x%d %s found at mem %lx," " IRQ %d, ", dev->name, bp->common.name, @@ -10432,6 +10494,8 @@ static int bnx2x_eeh_nic_unload(struct bnx2x *bp) bnx2x_free_skbs(bp); for_each_queue(bp, i) bnx2x_free_rx_sge_range(bp, bp->fp + i, NUM_RX_SGE); + for_each_queue(bp, i) + netif_napi_del(&bnx2x_fp(bp, i, napi)); bnx2x_free_mem(bp); bp->state = BNX2X_STATE_CLOSED; diff --git a/drivers/net/bnx2x_reg.h b/drivers/net/bnx2x_reg.h index a67b0c358ae..d084e5fc4b5 100644 --- a/drivers/net/bnx2x_reg.h +++ b/drivers/net/bnx2x_reg.h @@ -1,6 +1,6 @@ /* bnx2x_reg.h: Broadcom Everest network driver. * - * Copyright (c) 2007-2008 Broadcom Corporation + * Copyright (c) 2007-2009 Broadcom Corporation * * This program is free software; you can redistribute it and/or modify * it under the terms of the GNU General Public License as published by diff --git a/drivers/net/cxgb3/sge.c b/drivers/net/cxgb3/sge.c index 14f9fb3e879..379a1324db4 100644 --- a/drivers/net/cxgb3/sge.c +++ b/drivers/net/cxgb3/sge.c @@ -2104,6 +2104,7 @@ static void init_lro_mgr(struct sge_qset *qs, struct net_lro_mgr *lro_mgr) { lro_mgr->dev = qs->netdev; lro_mgr->features = LRO_F_NAPI; + lro_mgr->frag_align_pad = NET_IP_ALIGN; lro_mgr->ip_summed = CHECKSUM_UNNECESSARY; lro_mgr->ip_summed_aggr = CHECKSUM_UNNECESSARY; lro_mgr->max_desc = T3_MAX_LRO_SES; diff --git a/drivers/net/e1000e/82571.c b/drivers/net/e1000e/82571.c index cf43ee743b3..0890162953e 100644 --- a/drivers/net/e1000e/82571.c +++ b/drivers/net/e1000e/82571.c @@ -981,11 +981,15 @@ static void e1000_initialize_hw_bits_82571(struct e1000_hw *hw) ew32(PBA_ECC, reg); } - /* PCI-Ex Control Register */ + /* PCI-Ex Control Registers */ if (hw->mac.type == e1000_82574) { reg = er32(GCR); reg |= (1 << 22); ew32(GCR, reg); + + reg = er32(GCR2); + reg |= 1; + ew32(GCR2, reg); } return; diff --git a/drivers/net/e1000e/hw.h b/drivers/net/e1000e/hw.h index f25e961c6b3..2d4ce0492df 100644 --- a/drivers/net/e1000e/hw.h +++ b/drivers/net/e1000e/hw.h @@ -206,6 +206,7 @@ enum e1e_registers { E1000_MANC2H = 0x05860, /* Management Control To Host - RW */ E1000_SW_FW_SYNC = 0x05B5C, /* Software-Firmware Synchronization - RW */ E1000_GCR = 0x05B00, /* PCI-Ex Control */ + E1000_GCR2 = 0x05B64, /* PCI-Ex Control #2 */ E1000_FACTPS = 0x05B30, /* Function Active and Power State to MNG */ E1000_SWSM = 0x05B50, /* SW Semaphore */ E1000_FWSM = 0x05B54, /* FW Semaphore */ diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 7e33c129d51..2769083bfe8 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -1698,7 +1698,7 @@ static void __inline__ fec_set_mii(struct net_device *dev, struct fec_enet_priva /* * Set MII speed to 2.5 MHz */ - fep->phy_speed = ((((MCF_CLK / 2) / (2500000 / 10)) + 5) / 10) * 2; + fep->phy_speed = (MCF_CLK / 3) / (2500000 * 2 ) * 2; fecp->fec_mii_speed = fep->phy_speed; fec_restart(dev, 0); diff --git a/drivers/net/gianfar.c b/drivers/net/gianfar.c index ea530673236..3f7eab42aef 100644 --- a/drivers/net/gianfar.c +++ b/drivers/net/gianfar.c @@ -1423,15 +1423,11 @@ static void gfar_vlan_rx_register(struct net_device *dev, { struct gfar_private *priv = netdev_priv(dev); unsigned long flags; - struct vlan_group *old_grp; u32 tempval; spin_lock_irqsave(&priv->rxlock, flags); - old_grp = priv->vlgrp; - - if (old_grp == grp) - return; + priv->vlgrp = grp; if (grp) { /* Enable VLAN tag insertion */ diff --git a/drivers/net/ixgbe/ixgbe_main.c b/drivers/net/ixgbe/ixgbe_main.c index acef3c65cd2..d2f4d5f508b 100644 --- a/drivers/net/ixgbe/ixgbe_main.c +++ b/drivers/net/ixgbe/ixgbe_main.c @@ -318,6 +318,9 @@ static void ixgbe_update_rx_dca(struct ixgbe_adapter *adapter, rxctrl |= dca3_get_tag(&adapter->pdev->dev, cpu); rxctrl |= IXGBE_DCA_RXCTRL_DESC_DCA_EN; rxctrl |= IXGBE_DCA_RXCTRL_HEAD_DCA_EN; + rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_RRO_EN); + rxctrl &= ~(IXGBE_DCA_RXCTRL_DESC_WRO_EN | + IXGBE_DCA_RXCTRL_DESC_HSRO_EN); IXGBE_WRITE_REG(&adapter->hw, IXGBE_DCA_RXCTRL(q), rxctrl); rx_ring->cpu = cpu; } @@ -1741,6 +1744,32 @@ static void ixgbe_configure_rx(struct ixgbe_adapter *adapter) IXGBE_WRITE_REG(hw, IXGBE_RXCSUM, rxcsum); } +static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + + /* add VID to filter table */ + hw->mac.ops.set_vfta(&adapter->hw, vid, 0, true); +} + +static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) +{ + struct ixgbe_adapter *adapter = netdev_priv(netdev); + struct ixgbe_hw *hw = &adapter->hw; + + if (!test_bit(__IXGBE_DOWN, &adapter->state)) + ixgbe_irq_disable(adapter); + + vlan_group_set_device(adapter->vlgrp, vid, NULL); + + if (!test_bit(__IXGBE_DOWN, &adapter->state)) + ixgbe_irq_enable(adapter); + + /* remove VID from filter table */ + hw->mac.ops.set_vfta(&adapter->hw, vid, 0, false); +} + static void ixgbe_vlan_rx_register(struct net_device *netdev, struct vlan_group *grp) { @@ -1760,6 +1789,7 @@ static void ixgbe_vlan_rx_register(struct net_device *netdev, ctrl |= IXGBE_VLNCTRL_VME; ctrl &= ~IXGBE_VLNCTRL_CFIEN; IXGBE_WRITE_REG(&adapter->hw, IXGBE_VLNCTRL, ctrl); + ixgbe_vlan_rx_add_vid(netdev, 0); if (grp) { /* enable VLAN tag insert/strip */ @@ -1773,32 +1803,6 @@ static void ixgbe_vlan_rx_register(struct net_device *netdev, ixgbe_irq_enable(adapter); } -static void ixgbe_vlan_rx_add_vid(struct net_device *netdev, u16 vid) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; - - /* add VID to filter table */ - hw->mac.ops.set_vfta(&adapter->hw, vid, 0, true); -} - -static void ixgbe_vlan_rx_kill_vid(struct net_device *netdev, u16 vid) -{ - struct ixgbe_adapter *adapter = netdev_priv(netdev); - struct ixgbe_hw *hw = &adapter->hw; - - if (!test_bit(__IXGBE_DOWN, &adapter->state)) - ixgbe_irq_disable(adapter); - - vlan_group_set_device(adapter->vlgrp, vid, NULL); - - if (!test_bit(__IXGBE_DOWN, &adapter->state)) - ixgbe_irq_enable(adapter); - - /* remove VID from filter table */ - hw->mac.ops.set_vfta(&adapter->hw, vid, 0, false); -} - static void ixgbe_restore_vlan(struct ixgbe_adapter *adapter) { ixgbe_vlan_rx_register(adapter->netdev, adapter->vlgrp); @@ -2074,6 +2078,9 @@ static int ixgbe_up_complete(struct ixgbe_adapter *adapter) ixgbe_irq_enable(adapter); + /* enable transmits */ + netif_tx_start_all_queues(netdev); + /* bring the link up in the watchdog, this could race with our first * link up interrupt but shouldn't be a problem */ adapter->flags |= IXGBE_FLAG_NEED_LINK_UPDATE; @@ -3475,7 +3482,6 @@ static void ixgbe_watchdog_task(struct work_struct *work) (FLOW_TX ? "TX" : "None")))); netif_carrier_on(netdev); - netif_tx_wake_all_queues(netdev); } else { /* Force detection of hung controller */ adapter->detect_tx_hung = true; @@ -3487,7 +3493,6 @@ static void ixgbe_watchdog_task(struct work_struct *work) printk(KERN_INFO "ixgbe: %s NIC Link is Down\n", netdev->name); netif_carrier_off(netdev); - netif_tx_stop_all_queues(netdev); } } @@ -4218,7 +4223,6 @@ static int __devinit ixgbe_probe(struct pci_dev *pdev, } netif_carrier_off(netdev); - netif_tx_stop_all_queues(netdev); strcpy(netdev->name, "eth%d"); err = register_netdev(netdev); diff --git a/drivers/net/ixgbe/ixgbe_type.h b/drivers/net/ixgbe/ixgbe_type.h index 83a11ff9ffd..f011c57c920 100644 --- a/drivers/net/ixgbe/ixgbe_type.h +++ b/drivers/net/ixgbe/ixgbe_type.h @@ -404,6 +404,9 @@ #define IXGBE_DCA_RXCTRL_DESC_DCA_EN (1 << 5) /* DCA Rx Desc enable */ #define IXGBE_DCA_RXCTRL_HEAD_DCA_EN (1 << 6) /* DCA Rx Desc header enable */ #define IXGBE_DCA_RXCTRL_DATA_DCA_EN (1 << 7) /* DCA Rx Desc payload enable */ +#define IXGBE_DCA_RXCTRL_DESC_RRO_EN (1 << 9) /* DCA Rx rd Desc Relax Order */ +#define IXGBE_DCA_RXCTRL_DESC_WRO_EN (1 << 13) /* DCA Rx wr Desc Relax Order */ +#define IXGBE_DCA_RXCTRL_DESC_HSRO_EN (1 << 15) /* DCA Rx Split Header RO */ #define IXGBE_DCA_TXCTRL_CPUID_MASK 0x0000001F /* Tx CPUID Mask */ #define IXGBE_DCA_TXCTRL_DESC_DCA_EN (1 << 5) /* DCA Tx Desc enable */ diff --git a/drivers/net/korina.c b/drivers/net/korina.c index 1d6e48e1336..75010cac76a 100644 --- a/drivers/net/korina.c +++ b/drivers/net/korina.c @@ -416,6 +416,9 @@ static int korina_rx(struct net_device *dev, int limit) if (devcs & ETH_RX_MP) dev->stats.multicast++; + /* 16 bit align */ + skb_reserve(skb_new, 2); + lp->rx_skb[lp->rx_next_done] = skb_new; } @@ -740,6 +743,7 @@ static struct ethtool_ops netdev_ethtool_ops = { static void korina_alloc_ring(struct net_device *dev) { struct korina_private *lp = netdev_priv(dev); + struct sk_buff *skb; int i; /* Initialize the transmit descriptors */ @@ -755,8 +759,6 @@ static void korina_alloc_ring(struct net_device *dev) /* Initialize the receive descriptors */ for (i = 0; i < KORINA_NUM_RDS; i++) { - struct sk_buff *skb = lp->rx_skb[i]; - skb = dev_alloc_skb(KORINA_RBSIZE + 2); if (!skb) break; @@ -769,11 +771,12 @@ static void korina_alloc_ring(struct net_device *dev) lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]); } - /* loop back */ - lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[0]); - lp->rx_next_done = 0; + /* loop back receive descriptors, so the last + * descriptor points to the first one */ + lp->rd_ring[i - 1].link = CPHYSADDR(&lp->rd_ring[0]); + lp->rd_ring[i - 1].control |= DMA_DESC_COD; - lp->rd_ring[i].control |= DMA_DESC_COD; + lp->rx_next_done = 0; lp->rx_chain_head = 0; lp->rx_chain_tail = 0; lp->rx_chain_status = desc_empty; diff --git a/drivers/net/macb.c b/drivers/net/macb.c index a04da4ecaa8..f6c4936e2fa 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -321,6 +321,10 @@ static void macb_tx(struct macb *bp) printk(KERN_ERR "%s: TX underrun, resetting buffers\n", bp->dev->name); + /* Transfer ongoing, disable transmitter, to avoid confusion */ + if (status & MACB_BIT(TGO)) + macb_writel(bp, NCR, macb_readl(bp, NCR) & ~MACB_BIT(TE)); + head = bp->tx_head; /*Mark all the buffer as used to avoid sending a lost buffer*/ @@ -343,6 +347,10 @@ static void macb_tx(struct macb *bp) } bp->tx_head = bp->tx_tail = 0; + + /* Enable the transmitter again */ + if (status & MACB_BIT(TGO)) + macb_writel(bp, NCR, macb_readl(bp, NCR) | MACB_BIT(TE)); } if (!(status & MACB_BIT(COMP))) diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index 7253a499d9c..5f31bbb614a 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -136,21 +136,23 @@ static char mv643xx_eth_driver_version[] = "1.4"; /* * SDMA configuration register. */ +#define RX_BURST_SIZE_4_64BIT (2 << 1) #define RX_BURST_SIZE_16_64BIT (4 << 1) #define BLM_RX_NO_SWAP (1 << 4) #define BLM_TX_NO_SWAP (1 << 5) +#define TX_BURST_SIZE_4_64BIT (2 << 22) #define TX_BURST_SIZE_16_64BIT (4 << 22) #if defined(__BIG_ENDIAN) #define PORT_SDMA_CONFIG_DEFAULT_VALUE \ - (RX_BURST_SIZE_16_64BIT | \ - TX_BURST_SIZE_16_64BIT) + (RX_BURST_SIZE_4_64BIT | \ + TX_BURST_SIZE_4_64BIT) #elif defined(__LITTLE_ENDIAN) #define PORT_SDMA_CONFIG_DEFAULT_VALUE \ - (RX_BURST_SIZE_16_64BIT | \ - BLM_RX_NO_SWAP | \ - BLM_TX_NO_SWAP | \ - TX_BURST_SIZE_16_64BIT) + (RX_BURST_SIZE_4_64BIT | \ + BLM_RX_NO_SWAP | \ + BLM_TX_NO_SWAP | \ + TX_BURST_SIZE_4_64BIT) #else #error One of __BIG_ENDIAN or __LITTLE_ENDIAN must be defined #endif @@ -1594,7 +1596,7 @@ oom: entry = addr_crc(a); } - table[entry >> 2] |= 1 << (entry & 3); + table[entry >> 2] |= 1 << (8 * (entry & 3)); } for (i = 0; i < 0x100; i += 4) { @@ -2210,6 +2212,7 @@ static int mv643xx_eth_stop(struct net_device *dev) struct mv643xx_eth_private *mp = netdev_priv(dev); int i; + wrlp(mp, INT_MASK_EXT, 0x00000000); wrlp(mp, INT_MASK, 0x00000000); rdlp(mp, INT_MASK); diff --git a/drivers/net/myri10ge/myri10ge.c b/drivers/net/myri10ge/myri10ge.c index 6bb71b687f7..e9c1296b267 100644 --- a/drivers/net/myri10ge/myri10ge.c +++ b/drivers/net/myri10ge/myri10ge.c @@ -1,7 +1,7 @@ /************************************************************************* * myri10ge.c: Myricom Myri-10G Ethernet driver. * - * Copyright (C) 2005 - 2007 Myricom, Inc. + * Copyright (C) 2005 - 2009 Myricom, Inc. * All rights reserved. * * Redistribution and use in source and binary forms, with or without @@ -75,7 +75,7 @@ #include "myri10ge_mcp.h" #include "myri10ge_mcp_gen_header.h" -#define MYRI10GE_VERSION_STR "1.4.4-1.398" +#define MYRI10GE_VERSION_STR "1.4.4-1.401" MODULE_DESCRIPTION("Myricom 10G driver (10GbE)"); MODULE_AUTHOR("Maintainer: help@myri.com"); @@ -3786,7 +3786,7 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) if (status != 0) { dev_err(&pdev->dev, "Error %d writing PCI_EXP_DEVCTL\n", status); - goto abort_with_netdev; + goto abort_with_enabled; } pci_set_master(pdev); @@ -3801,13 +3801,13 @@ static int myri10ge_probe(struct pci_dev *pdev, const struct pci_device_id *ent) } if (status != 0) { dev_err(&pdev->dev, "Error %d setting DMA mask\n", status); - goto abort_with_netdev; + goto abort_with_enabled; } (void)pci_set_consistent_dma_mask(pdev, DMA_64BIT_MASK); mgp->cmd = dma_alloc_coherent(&pdev->dev, sizeof(*mgp->cmd), &mgp->cmd_bus, GFP_KERNEL); if (mgp->cmd == NULL) - goto abort_with_netdev; + goto abort_with_enabled; mgp->board_span = pci_resource_len(pdev, 0); mgp->iomem_base = pci_resource_start(pdev, 0); @@ -3943,8 +3943,10 @@ abort_with_mtrr: dma_free_coherent(&pdev->dev, sizeof(*mgp->cmd), mgp->cmd, mgp->cmd_bus); -abort_with_netdev: +abort_with_enabled: + pci_disable_device(pdev); +abort_with_netdev: free_netdev(netdev); return status; } @@ -3990,6 +3992,7 @@ static void myri10ge_remove(struct pci_dev *pdev) mgp->cmd, mgp->cmd_bus); free_netdev(netdev); + pci_disable_device(pdev); pci_set_drvdata(pdev, NULL); } diff --git a/drivers/net/netxen/netxen_nic.h b/drivers/net/netxen/netxen_nic.h index c11c568fd7d..a75a31005fd 100644 --- a/drivers/net/netxen/netxen_nic.h +++ b/drivers/net/netxen/netxen_nic.h @@ -146,7 +146,7 @@ #define MAX_RX_BUFFER_LENGTH 1760 #define MAX_RX_JUMBO_BUFFER_LENGTH 8062 -#define MAX_RX_LRO_BUFFER_LENGTH ((48*1024)-512) +#define MAX_RX_LRO_BUFFER_LENGTH (8062) #define RX_DMA_MAP_LEN (MAX_RX_BUFFER_LENGTH - 2) #define RX_JUMBO_DMA_MAP_LEN \ (MAX_RX_JUMBO_BUFFER_LENGTH - 2) @@ -207,11 +207,11 @@ #define MAX_CMD_DESCRIPTORS 4096 #define MAX_RCV_DESCRIPTORS 16384 -#define MAX_CMD_DESCRIPTORS_HOST (MAX_CMD_DESCRIPTORS / 4) -#define MAX_RCV_DESCRIPTORS_1G (MAX_RCV_DESCRIPTORS / 4) -#define MAX_RCV_DESCRIPTORS_10G 8192 -#define MAX_JUMBO_RCV_DESCRIPTORS 1024 -#define MAX_LRO_RCV_DESCRIPTORS 64 +#define MAX_CMD_DESCRIPTORS_HOST 1024 +#define MAX_RCV_DESCRIPTORS_1G 2048 +#define MAX_RCV_DESCRIPTORS_10G 4096 +#define MAX_JUMBO_RCV_DESCRIPTORS 512 +#define MAX_LRO_RCV_DESCRIPTORS 8 #define MAX_RCVSTATUS_DESCRIPTORS MAX_RCV_DESCRIPTORS #define MAX_JUMBO_RCV_DESC MAX_JUMBO_RCV_DESCRIPTORS #define MAX_RCV_DESC MAX_RCV_DESCRIPTORS diff --git a/drivers/net/netxen/netxen_nic_ethtool.c b/drivers/net/netxen/netxen_nic_ethtool.c index c0bd40fcf70..0894a7be022 100644 --- a/drivers/net/netxen/netxen_nic_ethtool.c +++ b/drivers/net/netxen/netxen_nic_ethtool.c @@ -561,7 +561,10 @@ netxen_nic_get_ringparam(struct net_device *dev, struct ethtool_ringparam *ring) } ring->tx_pending = adapter->max_tx_desc_count; - ring->rx_max_pending = MAX_RCV_DESCRIPTORS; + if (adapter->ahw.board_type == NETXEN_NIC_GBE) + ring->rx_max_pending = MAX_RCV_DESCRIPTORS_1G; + else + ring->rx_max_pending = MAX_RCV_DESCRIPTORS_10G; ring->tx_max_pending = MAX_CMD_DESCRIPTORS_HOST; ring->rx_jumbo_max_pending = MAX_JUMBO_RCV_DESCRIPTORS; ring->rx_mini_max_pending = 0; diff --git a/drivers/net/netxen/netxen_nic_main.c b/drivers/net/netxen/netxen_nic_main.c index d854f07ef4d..645d384fe87 100644 --- a/drivers/net/netxen/netxen_nic_main.c +++ b/drivers/net/netxen/netxen_nic_main.c @@ -735,17 +735,18 @@ netxen_nic_probe(struct pci_dev *pdev, const struct pci_device_id *ent) SET_ETHTOOL_OPS(netdev, &netxen_nic_ethtool_ops); - /* ScatterGather support */ - netdev->features = NETIF_F_SG; - netdev->features |= NETIF_F_IP_CSUM; - netdev->features |= NETIF_F_TSO; + netdev->features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO); + netdev->vlan_features |= (NETIF_F_SG | NETIF_F_IP_CSUM | NETIF_F_TSO); + if (NX_IS_REVISION_P3(revision_id)) { - netdev->features |= NETIF_F_IPV6_CSUM; - netdev->features |= NETIF_F_TSO6; + netdev->features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6); + netdev->vlan_features |= (NETIF_F_IPV6_CSUM | NETIF_F_TSO6); } - if (adapter->pci_using_dac) + if (adapter->pci_using_dac) { netdev->features |= NETIF_F_HIGHDMA; + netdev->vlan_features |= NETIF_F_HIGHDMA; + } /* * Set the CRB window to invalid. If any register in window 0 is @@ -1166,6 +1167,14 @@ static bool netxen_tso_check(struct net_device *netdev, { bool tso = false; u8 opcode = TX_ETHER_PKT; + __be16 protocol = skb->protocol; + u16 flags = 0; + + if (protocol == __constant_htons(ETH_P_8021Q)) { + struct vlan_ethhdr *vh = (struct vlan_ethhdr *)skb->data; + protocol = vh->h_vlan_encapsulated_proto; + flags = FLAGS_VLAN_TAGGED; + } if ((netdev->features & (NETIF_F_TSO | NETIF_F_TSO6)) && skb_shinfo(skb)->gso_size > 0) { @@ -1174,21 +1183,21 @@ static bool netxen_tso_check(struct net_device *netdev, desc->total_hdr_length = skb_transport_offset(skb) + tcp_hdrlen(skb); - opcode = (skb->protocol == htons(ETH_P_IPV6)) ? + opcode = (protocol == __constant_htons(ETH_P_IPV6)) ? TX_TCP_LSO6 : TX_TCP_LSO; tso = true; } else if (skb->ip_summed == CHECKSUM_PARTIAL) { u8 l4proto; - if (skb->protocol == htons(ETH_P_IP)) { + if (protocol == __constant_htons(ETH_P_IP)) { l4proto = ip_hdr(skb)->protocol; if (l4proto == IPPROTO_TCP) opcode = TX_TCP_PKT; else if(l4proto == IPPROTO_UDP) opcode = TX_UDP_PKT; - } else if (skb->protocol == htons(ETH_P_IPV6)) { + } else if (protocol == __constant_htons(ETH_P_IPV6)) { l4proto = ipv6_hdr(skb)->nexthdr; if (l4proto == IPPROTO_TCP) @@ -1199,7 +1208,7 @@ static bool netxen_tso_check(struct net_device *netdev, } desc->tcp_hdr_offset = skb_transport_offset(skb); desc->ip_hdr_offset = skb_network_offset(skb); - netxen_set_tx_flags_opcode(desc, 0, opcode); + netxen_set_tx_flags_opcode(desc, flags, opcode); return tso; } diff --git a/drivers/net/phy/mdio_bus.c b/drivers/net/phy/mdio_bus.c index 11adf6ed462..811a637695c 100644 --- a/drivers/net/phy/mdio_bus.c +++ b/drivers/net/phy/mdio_bus.c @@ -296,9 +296,8 @@ static int mdio_bus_suspend(struct device * dev, pm_message_t state) struct phy_driver *phydrv = to_phy_driver(drv); struct phy_device *phydev = to_phy_device(dev); - if ((!device_may_wakeup(phydev->dev.parent)) && - (phydrv && phydrv->suspend)) - ret = phydrv->suspend(phydev); + if (drv && phydrv->suspend && !device_may_wakeup(phydev->dev.parent)) + ret = phydrv->suspend(phydev); return ret; } @@ -310,8 +309,7 @@ static int mdio_bus_resume(struct device * dev) struct phy_driver *phydrv = to_phy_driver(drv); struct phy_device *phydev = to_phy_device(dev); - if ((!device_may_wakeup(phydev->dev.parent)) && - (phydrv && phydrv->resume)) + if (drv && phydrv->resume && !device_may_wakeup(phydev->dev.parent)) ret = phydrv->resume(phydev); return ret; diff --git a/drivers/net/phy/smsc.c b/drivers/net/phy/smsc.c index c05d38d4635..1387187543e 100644 --- a/drivers/net/phy/smsc.c +++ b/drivers/net/phy/smsc.c @@ -81,6 +81,9 @@ static struct phy_driver lan83c185_driver = { .ack_interrupt = smsc_phy_ack_interrupt, .config_intr = smsc_phy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE, } }; @@ -102,6 +105,9 @@ static struct phy_driver lan8187_driver = { .ack_interrupt = smsc_phy_ack_interrupt, .config_intr = smsc_phy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE, } }; @@ -123,6 +129,9 @@ static struct phy_driver lan8700_driver = { .ack_interrupt = smsc_phy_ack_interrupt, .config_intr = smsc_phy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE, } }; @@ -144,6 +153,9 @@ static struct phy_driver lan911x_int_driver = { .ack_interrupt = smsc_phy_ack_interrupt, .config_intr = smsc_phy_config_intr, + .suspend = genphy_suspend, + .resume = genphy_resume, + .driver = { .owner = THIS_MODULE, } }; diff --git a/drivers/net/sfc/efx.c b/drivers/net/sfc/efx.c index 7673fd92eaf..101c00a7bb7 100644 --- a/drivers/net/sfc/efx.c +++ b/drivers/net/sfc/efx.c @@ -854,20 +854,27 @@ static void efx_fini_io(struct efx_nic *efx) * interrupts across them. */ static int efx_wanted_rx_queues(void) { - cpumask_t core_mask; + cpumask_var_t core_mask; int count; int cpu; - cpus_clear(core_mask); + if (!alloc_cpumask_var(&core_mask, GFP_KERNEL)) { + printk(KERN_WARNING + "efx.c: allocation failure, irq balancing hobbled\n"); + return 1; + } + + cpumask_clear(core_mask); count = 0; for_each_online_cpu(cpu) { - if (!cpu_isset(cpu, core_mask)) { + if (!cpumask_test_cpu(cpu, core_mask)) { ++count; - cpus_or(core_mask, core_mask, - topology_core_siblings(cpu)); + cpumask_or(core_mask, core_mask, + topology_core_cpumask(cpu)); } } + free_cpumask_var(core_mask); return count; } diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c index 5e2dbaee125..8b3f8468538 100644 --- a/drivers/net/tg3.c +++ b/drivers/net/tg3.c @@ -7535,11 +7535,58 @@ static int tg3_test_msi(struct tg3 *tp) return err; } +static int tg3_request_firmware(struct tg3 *tp) +{ + const __be32 *fw_data; + + if (request_firmware(&tp->fw, tp->fw_needed, &tp->pdev->dev)) { + printk(KERN_ERR "%s: Failed to load firmware \"%s\"\n", + tp->dev->name, tp->fw_needed); + return -ENOENT; + } + + fw_data = (void *)tp->fw->data; + + /* Firmware blob starts with version numbers, followed by + * start address and _full_ length including BSS sections + * (which must be longer than the actual data, of course + */ + + tp->fw_len = be32_to_cpu(fw_data[2]); /* includes bss */ + if (tp->fw_len < (tp->fw->size - 12)) { + printk(KERN_ERR "%s: bogus length %d in \"%s\"\n", + tp->dev->name, tp->fw_len, tp->fw_needed); + release_firmware(tp->fw); + tp->fw = NULL; + return -EINVAL; + } + + /* We no longer need firmware; we have it. */ + tp->fw_needed = NULL; + return 0; +} + static int tg3_open(struct net_device *dev) { struct tg3 *tp = netdev_priv(dev); int err; + if (tp->fw_needed) { + err = tg3_request_firmware(tp); + if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) { + if (err) + return err; + } else if (err) { + printk(KERN_WARNING "%s: TSO capability disabled.\n", + tp->dev->name); + tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE; + } else if (!(tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE)) { + printk(KERN_NOTICE "%s: TSO capability restored.\n", + tp->dev->name); + tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE; + } + } + netif_carrier_off(tp->dev); err = tg3_set_power_state(tp, PCI_D0); @@ -12934,7 +12981,6 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, struct net_device *dev; struct tg3 *tp; int err, pm_cap; - const char *fw_name = NULL; char str[40]; u64 dma_mask, persist_dma_mask; @@ -13091,7 +13137,7 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, tg3_init_bufmgr_config(tp); if (tp->pci_chip_rev_id == CHIPREV_ID_5701_A0) - fw_name = FIRMWARE_TG3; + tp->fw_needed = FIRMWARE_TG3; if (tp->tg3_flags2 & TG3_FLG2_HW_TSO) { tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE; @@ -13104,37 +13150,10 @@ static int __devinit tg3_init_one(struct pci_dev *pdev, tp->tg3_flags2 &= ~TG3_FLG2_TSO_CAPABLE; } else { tp->tg3_flags2 |= TG3_FLG2_TSO_CAPABLE | TG3_FLG2_TSO_BUG; - } - if (tp->tg3_flags2 & TG3_FLG2_TSO_CAPABLE) { if (GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5705) - fw_name = FIRMWARE_TG3TSO5; + tp->fw_needed = FIRMWARE_TG3TSO5; else - fw_name = FIRMWARE_TG3TSO; - } - - if (fw_name) { - const __be32 *fw_data; - - err = request_firmware(&tp->fw, fw_name, &tp->pdev->dev); - if (err) { - printk(KERN_ERR "tg3: Failed to load firmware \"%s\"\n", - fw_name); - goto err_out_iounmap; - } - - fw_data = (void *)tp->fw->data; - - /* Firmware blob starts with version numbers, followed by - start address and _full_ length including BSS sections - (which must be longer than the actual data, of course */ - - tp->fw_len = be32_to_cpu(fw_data[2]); /* includes bss */ - if (tp->fw_len < (tp->fw->size - 12)) { - printk(KERN_ERR "tg3: bogus length %d in \"%s\"\n", - tp->fw_len, fw_name); - err = -EINVAL; - goto err_out_fw; - } + tp->fw_needed = FIRMWARE_TG3TSO; } /* TSO is on by default on chips that support hardware TSO. diff --git a/drivers/net/tg3.h b/drivers/net/tg3.h index ae5da603c6a..508def3e077 100644 --- a/drivers/net/tg3.h +++ b/drivers/net/tg3.h @@ -2764,6 +2764,7 @@ struct tg3 { struct ethtool_coalesce coal; /* firmware info */ + const char *fw_needed; const struct firmware *fw; u32 fw_len; /* includes BSS */ }; diff --git a/drivers/net/usb/mcs7830.c b/drivers/net/usb/mcs7830.c index 5385d66b306..ced8f36ebd0 100644 --- a/drivers/net/usb/mcs7830.c +++ b/drivers/net/usb/mcs7830.c @@ -94,10 +94,18 @@ static int mcs7830_get_reg(struct usbnet *dev, u16 index, u16 size, void *data) { struct usb_device *xdev = dev->udev; int ret; + void *buffer; + + buffer = kmalloc(size, GFP_NOIO); + if (buffer == NULL) + return -ENOMEM; ret = usb_control_msg(xdev, usb_rcvctrlpipe(xdev, 0), MCS7830_RD_BREQ, - MCS7830_RD_BMREQ, 0x0000, index, data, + MCS7830_RD_BMREQ, 0x0000, index, buffer, size, MCS7830_CTRL_TIMEOUT); + memcpy(data, buffer, size); + kfree(buffer); + return ret; } @@ -105,10 +113,18 @@ static int mcs7830_set_reg(struct usbnet *dev, u16 index, u16 size, void *data) { struct usb_device *xdev = dev->udev; int ret; + void *buffer; + + buffer = kmalloc(size, GFP_NOIO); + if (buffer == NULL) + return -ENOMEM; + + memcpy(buffer, data, size); ret = usb_control_msg(xdev, usb_sndctrlpipe(xdev, 0), MCS7830_WR_BREQ, - MCS7830_WR_BMREQ, 0x0000, index, data, + MCS7830_WR_BMREQ, 0x0000, index, buffer, size, MCS7830_CTRL_TIMEOUT); + kfree(buffer); return ret; } diff --git a/drivers/net/via-velocity.c b/drivers/net/via-velocity.c index a75f91dc315..c5691fdb707 100644 --- a/drivers/net/via-velocity.c +++ b/drivers/net/via-velocity.c @@ -1302,7 +1302,7 @@ static void velocity_free_rd_ring(struct velocity_info *vptr) static int velocity_init_td_ring(struct velocity_info *vptr) { dma_addr_t curr; - unsigned int j; + int j; /* Init the TD ring entries */ for (j = 0; j < vptr->tx.numq; j++) { diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 43f6523c40b..63ef2a8905f 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -24,6 +24,7 @@ #include <linux/virtio.h> #include <linux/virtio_net.h> #include <linux/scatterlist.h> +#include <linux/if_vlan.h> static int napi_weight = 128; module_param(napi_weight, int, 0444); @@ -33,7 +34,7 @@ module_param(csum, bool, 0444); module_param(gso, bool, 0444); /* FIXME: MTU in config. */ -#define MAX_PACKET_LEN (ETH_HLEN+ETH_DATA_LEN) +#define MAX_PACKET_LEN (ETH_HLEN + VLAN_HLEN + ETH_DATA_LEN) #define GOOD_COPY_LEN 128 struct virtnet_info diff --git a/drivers/net/wimax/i2400m/control.c b/drivers/net/wimax/i2400m/control.c index d3d37fed689..15d9f51b292 100644 --- a/drivers/net/wimax/i2400m/control.c +++ b/drivers/net/wimax/i2400m/control.c @@ -609,7 +609,7 @@ void i2400m_msg_to_dev_cancel_wait(struct i2400m *i2400m, int code) spin_lock_irqsave(&i2400m->rx_lock, flags); ack_skb = i2400m->ack_skb; if (ack_skb && !IS_ERR(ack_skb)) - kfree(ack_skb); + kfree_skb(ack_skb); i2400m->ack_skb = ERR_PTR(code); spin_unlock_irqrestore(&i2400m->rx_lock, flags); } diff --git a/drivers/net/wimax/i2400m/usb-rx.c b/drivers/net/wimax/i2400m/usb-rx.c index 074cc1f8985..a314799967c 100644 --- a/drivers/net/wimax/i2400m/usb-rx.c +++ b/drivers/net/wimax/i2400m/usb-rx.c @@ -184,6 +184,8 @@ void i2400mu_rx_size_maybe_shrink(struct i2400mu *i2400mu) * NOTE: this function might realloc the skb (if it is too small), * so always update with the one returned. * ERR_PTR() is < 0 on error. + * Will return NULL if it cannot reallocate -- this can be + * considered a transient retryable error. */ static struct sk_buff *i2400mu_rx(struct i2400mu *i2400mu, struct sk_buff *rx_skb) @@ -243,8 +245,8 @@ retry: if (printk_ratelimit()) dev_err(dev, "RX: Can't reallocate skb to %d; " "RX dropped\n", rx_size); - kfree(rx_skb); - result = 0; + kfree_skb(rx_skb); + rx_skb = NULL; goto out; /* drop it...*/ } kfree_skb(rx_skb); @@ -344,7 +346,8 @@ int i2400mu_rxd(void *_i2400mu) if (IS_ERR(rx_skb)) goto out; atomic_dec(&i2400mu->rx_pending_count); - if (rx_skb->len == 0) { /* some ignorable condition */ + if (rx_skb == NULL || rx_skb->len == 0) { + /* some "ignorable" condition */ kfree_skb(rx_skb); continue; } diff --git a/drivers/net/wireless/ath9k/rc.c b/drivers/net/wireless/ath9k/rc.c index 04ab457a8fa..1b71b934bb5 100644 --- a/drivers/net/wireless/ath9k/rc.c +++ b/drivers/net/wireless/ath9k/rc.c @@ -490,7 +490,7 @@ static inline int ath_rc_get_nextvalid_txrate(struct ath_rate_table *rate_table, static int ath_rc_valid_phyrate(u32 phy, u32 capflag, int ignore_cw) { - if (WLAN_RC_PHY_HT(phy) & !(capflag & WLAN_RC_HT_FLAG)) + if (WLAN_RC_PHY_HT(phy) && !(capflag & WLAN_RC_HT_FLAG)) return 0; if (WLAN_RC_PHY_DS(phy) && !(capflag & WLAN_RC_DS_FLAG)) return 0; diff --git a/drivers/net/wireless/ath9k/regd_common.h b/drivers/net/wireless/ath9k/regd_common.h index 9112c030b1e..6df1b3b77c2 100644 --- a/drivers/net/wireless/ath9k/regd_common.h +++ b/drivers/net/wireless/ath9k/regd_common.h @@ -228,7 +228,7 @@ enum { }; #define REG_DOMAIN_2GHZ_MASK (REQ_MASK & \ - (!(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB))) + (~(ADHOC_NO_11A | DISALLOW_ADHOC_11A | DISALLOW_ADHOC_11A_TURB))) #define REG_DOMAIN_5GHZ_MASK REQ_MASK static struct reg_dmn_pair_mapping regDomainPairs[] = { diff --git a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c index 9b60a0c5de5..21c841847d8 100644 --- a/drivers/net/wireless/iwlwifi/iwl-3945-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-3945-rs.c @@ -638,12 +638,16 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, s8 scale_action = 0; unsigned long flags; struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)skb->data; - u16 fc, rate_mask; + u16 fc; + u16 rate_mask = 0; struct iwl3945_priv *priv = (struct iwl3945_priv *)priv_r; struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); IWL_DEBUG_RATE("enter\n"); + if (sta) + rate_mask = sta->supp_rates[sband->band]; + /* Send management frames and broadcast/multicast data using lowest * rate. */ fc = le16_to_cpu(hdr->frame_control); @@ -651,11 +655,15 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, is_multicast_ether_addr(hdr->addr1) || !sta || !priv_sta) { IWL_DEBUG_RATE("leave: No STA priv data to update!\n"); - info->control.rates[0].idx = rate_lowest_index(sband, sta); + if (!rate_mask) + info->control.rates[0].idx = + rate_lowest_index(sband, NULL); + else + info->control.rates[0].idx = + rate_lowest_index(sband, sta); return; } - rate_mask = sta->supp_rates[sband->band]; index = min(rs_sta->last_txrate_idx & 0xffff, IWL_RATE_COUNT - 1); if (sband->band == IEEE80211_BAND_5GHZ) diff --git a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c index f3f17929ca0..27f50471aed 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn-rs.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn-rs.c @@ -944,7 +944,8 @@ static void rs_tx_status(void *priv_r, struct ieee80211_supported_band *sband, } /* See if there's a better rate or modulation mode to try. */ - rs_rate_scale_perform(priv, hdr, sta, lq_sta); + if (sta && sta->supp_rates[sband->band]) + rs_rate_scale_perform(priv, hdr, sta, lq_sta); out: return; } @@ -2101,14 +2102,23 @@ static void rs_get_rate(void *priv_r, struct ieee80211_sta *sta, void *priv_sta, struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb); struct iwl_lq_sta *lq_sta = priv_sta; int rate_idx; + u64 mask_bit = 0; IWL_DEBUG_RATE_LIMIT("rate scale calculate new rate for skb\n"); + if (sta) + mask_bit = sta->supp_rates[sband->band]; + /* Send management frames and broadcast/multicast data using lowest * rate. */ if (!ieee80211_is_data(hdr->frame_control) || is_multicast_ether_addr(hdr->addr1) || !sta || !lq_sta) { - info->control.rates[0].idx = rate_lowest_index(sband, sta); + if (!mask_bit) + info->control.rates[0].idx = + rate_lowest_index(sband, NULL); + else + info->control.rates[0].idx = + rate_lowest_index(sband, sta); return; } diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c index 5da6b35cd26..0dc8eed1640 100644 --- a/drivers/net/wireless/iwlwifi/iwl-agn.c +++ b/drivers/net/wireless/iwlwifi/iwl-agn.c @@ -2482,7 +2482,7 @@ static int iwl_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) dev_kfree_skb_any(skb); IWL_DEBUG_MACDUMP("leave\n"); - return 0; + return NETDEV_TX_OK; } static int iwl_mac_add_interface(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/iwlwifi/iwl-hcmd.c b/drivers/net/wireless/iwlwifi/iwl-hcmd.c index 8c71ad4f88c..4b35b30e493 100644 --- a/drivers/net/wireless/iwlwifi/iwl-hcmd.c +++ b/drivers/net/wireless/iwlwifi/iwl-hcmd.c @@ -224,7 +224,7 @@ int iwl_send_cmd_sync(struct iwl_priv *priv, struct iwl_host_cmd *cmd) IWL_ERROR("Error: Response NULL in '%s'\n", get_cmd_string(cmd->id)); ret = -EIO; - goto out; + goto cancel; } ret = 0; diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index d64580805d6..95d01984c80 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -745,7 +745,7 @@ static int iwl3945_send_cmd_sync(struct iwl3945_priv *priv, struct iwl3945_host_ IWL_ERROR("Error: Response NULL in '%s'\n", get_cmd_string(cmd->id)); ret = -EIO; - goto out; + goto cancel; } ret = 0; @@ -6538,7 +6538,7 @@ static int iwl3945_mac_tx(struct ieee80211_hw *hw, struct sk_buff *skb) dev_kfree_skb_any(skb); IWL_DEBUG_MAC80211("leave\n"); - return 0; + return NETDEV_TX_OK; } static int iwl3945_mac_add_interface(struct ieee80211_hw *hw, diff --git a/drivers/net/wireless/libertas/hostcmd.h b/drivers/net/wireless/libertas/hostcmd.h index e173b1b46c2..f6a79a653b7 100644 --- a/drivers/net/wireless/libertas/hostcmd.h +++ b/drivers/net/wireless/libertas/hostcmd.h @@ -32,7 +32,7 @@ struct txpd { u8 pktdelay_2ms; /* reserved */ u8 reserved1; -}; +} __attribute__ ((packed)); /* RxPD Descriptor */ struct rxpd { @@ -63,7 +63,7 @@ struct rxpd { /* Pkt Priority */ u8 priority; u8 reserved[3]; -}; +} __attribute__ ((packed)); struct cmd_header { __le16 command; @@ -97,7 +97,7 @@ struct enc_key { struct lbs_offset_value { u32 offset; u32 value; -}; +} __attribute__ ((packed)); /* Define general data structure */ /* cmd_DS_GEN */ @@ -107,7 +107,7 @@ struct cmd_ds_gen { __le16 seqnum; __le16 result; void *cmdresp[0]; -}; +} __attribute__ ((packed)); #define S_DS_GEN sizeof(struct cmd_ds_gen) @@ -163,7 +163,7 @@ struct cmd_ds_802_11_subscribe_event { * bump this up a bit. */ uint8_t tlv[128]; -}; +} __attribute__ ((packed)); /* * This scan handle Country Information IE(802.11d compliant) @@ -180,7 +180,7 @@ struct cmd_ds_802_11_scan { mrvlietypes_chanlistparamset_t ChanListParamSet; mrvlietypes_ratesparamset_t OpRateSet; #endif -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_scan_rsp { struct cmd_header hdr; @@ -188,7 +188,7 @@ struct cmd_ds_802_11_scan_rsp { __le16 bssdescriptsize; uint8_t nr_sets; uint8_t bssdesc_and_tlvbuffer[0]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_get_log { struct cmd_header hdr; @@ -206,33 +206,33 @@ struct cmd_ds_802_11_get_log { __le32 fcserror; __le32 txframe; __le32 wepundecryptable; -}; +} __attribute__ ((packed)); struct cmd_ds_mac_control { struct cmd_header hdr; __le16 action; u16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_mac_multicast_adr { struct cmd_header hdr; __le16 action; __le16 nr_of_adrs; u8 maclist[ETH_ALEN * MRVDRV_MAX_MULTICAST_LIST_SIZE]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_authenticate { u8 macaddr[ETH_ALEN]; u8 authtype; u8 reserved[10]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_deauthenticate { struct cmd_header hdr; u8 macaddr[ETH_ALEN]; __le16 reasoncode; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_associate { u8 peerstaaddr[6]; @@ -251,7 +251,7 @@ struct cmd_ds_802_11_associate { struct cmd_ds_802_11_associate_rsp { struct ieeetypes_assocrsp assocRsp; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_set_wep { struct cmd_header hdr; @@ -265,7 +265,7 @@ struct cmd_ds_802_11_set_wep { /* 40, 128bit or TXWEP */ uint8_t keytype[4]; uint8_t keymaterial[4][16]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_3_get_stat { __le32 xmitok; @@ -274,7 +274,7 @@ struct cmd_ds_802_3_get_stat { __le32 rcverror; __le32 rcvnobuffer; __le32 rcvcrcerror; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_get_stat { __le32 txfragmentcnt; @@ -294,7 +294,7 @@ struct cmd_ds_802_11_get_stat { __le32 txbeacon; __le32 rxbeacon; __le32 wepundecryptable; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_snmp_mib { struct cmd_header hdr; @@ -303,58 +303,58 @@ struct cmd_ds_802_11_snmp_mib { __le16 oid; __le16 bufsize; u8 value[128]; -}; +} __attribute__ ((packed)); struct cmd_ds_mac_reg_map { __le16 buffersize; u8 regmap[128]; __le16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_bbp_reg_map { __le16 buffersize; u8 regmap[128]; __le16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_rf_reg_map { __le16 buffersize; u8 regmap[64]; __le16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_mac_reg_access { __le16 action; __le16 offset; __le32 value; -}; +} __attribute__ ((packed)); struct cmd_ds_bbp_reg_access { __le16 action; __le16 offset; u8 value; u8 reserved[3]; -}; +} __attribute__ ((packed)); struct cmd_ds_rf_reg_access { __le16 action; __le16 offset; u8 value; u8 reserved[3]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_radio_control { struct cmd_header hdr; __le16 action; __le16 control; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_beacon_control { __le16 action; __le16 beacon_enable; __le16 beacon_period; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_sleep_params { struct cmd_header hdr; @@ -379,7 +379,7 @@ struct cmd_ds_802_11_sleep_params { /* reserved field, should be set to zero */ __le16 reserved; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_inactivity_timeout { struct cmd_header hdr; @@ -389,7 +389,7 @@ struct cmd_ds_802_11_inactivity_timeout { /* Inactivity timeout in msec */ __le16 timeout; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rf_channel { struct cmd_header hdr; @@ -399,7 +399,7 @@ struct cmd_ds_802_11_rf_channel { __le16 rftype; /* unused */ __le16 reserved; /* unused */ u8 channellist[32]; /* unused */ -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rssi { /* weighting factor */ @@ -408,21 +408,21 @@ struct cmd_ds_802_11_rssi { __le16 reserved_0; __le16 reserved_1; __le16 reserved_2; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rssi_rsp { __le16 SNR; __le16 noisefloor; __le16 avgSNR; __le16 avgnoisefloor; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_mac_address { struct cmd_header hdr; __le16 action; u8 macadd[ETH_ALEN]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rf_tx_power { struct cmd_header hdr; @@ -431,7 +431,7 @@ struct cmd_ds_802_11_rf_tx_power { __le16 curlevel; s8 maxlevel; s8 minlevel; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rf_antenna { __le16 action; @@ -439,33 +439,33 @@ struct cmd_ds_802_11_rf_antenna { /* Number of antennas or 0xffff(diversity) */ __le16 antennamode; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_monitor_mode { __le16 action; __le16 mode; -}; +} __attribute__ ((packed)); struct cmd_ds_set_boot2_ver { struct cmd_header hdr; __le16 action; __le16 version; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_fw_wake_method { struct cmd_header hdr; __le16 action; __le16 method; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_sleep_period { struct cmd_header hdr; __le16 action; __le16 period; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_ps_mode { __le16 action; @@ -473,7 +473,7 @@ struct cmd_ds_802_11_ps_mode { __le16 multipledtim; __le16 reserved; __le16 locallisteninterval; -}; +} __attribute__ ((packed)); struct cmd_confirm_sleep { struct cmd_header hdr; @@ -483,7 +483,7 @@ struct cmd_confirm_sleep { __le16 multipledtim; __le16 reserved; __le16 locallisteninterval; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_data_rate { struct cmd_header hdr; @@ -491,14 +491,14 @@ struct cmd_ds_802_11_data_rate { __le16 action; __le16 reserved; u8 rates[MAX_RATES]; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_rate_adapt_rateset { struct cmd_header hdr; __le16 action; __le16 enablehwauto; __le16 bitmap; -}; +} __attribute__ ((packed)); struct cmd_ds_802_11_ad_hoc_start { struct cmd_header hdr; @@ -520,7 +520,7 @@ struct cmd_ds_802_11_ad_hoc_result { u8 pad[3]; u8 bssid[ETH_ALEN]; -}; +} __attribute__ ((packed)); struct adhoc_bssdesc { u8 bssid[ETH_ALEN]; @@ -578,7 +578,7 @@ struct MrvlIEtype_keyParamSet { /* key material of size keylen */ u8 key[32]; -}; +} __attribute__ ((packed)); #define MAX_WOL_RULES 16 @@ -590,7 +590,7 @@ struct host_wol_rule { __le16 reserve; __be32 sig_mask; __be32 signature; -}; +} __attribute__ ((packed)); struct wol_config { uint8_t action; @@ -598,8 +598,7 @@ struct wol_config { uint8_t no_rules_in_cmd; uint8_t result; struct host_wol_rule rule[MAX_WOL_RULES]; -}; - +} __attribute__ ((packed)); struct cmd_ds_host_sleep { struct cmd_header hdr; diff --git a/drivers/net/wireless/orinoco/orinoco.c b/drivers/net/wireless/orinoco/orinoco.c index c3bb85e0251..45a04faa781 100644 --- a/drivers/net/wireless/orinoco/orinoco.c +++ b/drivers/net/wireless/orinoco/orinoco.c @@ -1673,7 +1673,7 @@ static void print_linkstatus(struct net_device *dev, u16 status) s = "UNKNOWN"; } - printk(KERN_INFO "%s: New link status: %s (%04x)\n", + printk(KERN_DEBUG "%s: New link status: %s (%04x)\n", dev->name, s, status); } @@ -5068,33 +5068,30 @@ static int orinoco_ioctl_set_genie(struct net_device *dev, struct orinoco_private *priv = netdev_priv(dev); u8 *buf; unsigned long flags; - int err = 0; /* cut off at IEEE80211_MAX_DATA_LEN */ if ((wrqu->data.length > IEEE80211_MAX_DATA_LEN) || (wrqu->data.length && (extra == NULL))) return -EINVAL; - if (orinoco_lock(priv, &flags) != 0) - return -EBUSY; - if (wrqu->data.length) { buf = kmalloc(wrqu->data.length, GFP_KERNEL); - if (buf == NULL) { - err = -ENOMEM; - goto out; - } + if (buf == NULL) + return -ENOMEM; memcpy(buf, extra, wrqu->data.length); - kfree(priv->wpa_ie); - priv->wpa_ie = buf; - priv->wpa_ie_len = wrqu->data.length; - } else { - kfree(priv->wpa_ie); - priv->wpa_ie = NULL; - priv->wpa_ie_len = 0; + } else + buf = NULL; + + if (orinoco_lock(priv, &flags) != 0) { + kfree(buf); + return -EBUSY; } + kfree(priv->wpa_ie); + priv->wpa_ie = buf; + priv->wpa_ie_len = wrqu->data.length; + if (priv->wpa_ie) { /* Looks like wl_lkm wants to check the auth alg, and * somehow pass it to the firmware. @@ -5103,9 +5100,8 @@ static int orinoco_ioctl_set_genie(struct net_device *dev, */ } -out: orinoco_unlock(priv, &flags); - return err; + return 0; } static int orinoco_ioctl_get_genie(struct net_device *dev, diff --git a/drivers/net/wireless/p54/p54common.c b/drivers/net/wireless/p54/p54common.c index c6a370fa9bc..34561e6e816 100644 --- a/drivers/net/wireless/p54/p54common.c +++ b/drivers/net/wireless/p54/p54common.c @@ -451,8 +451,8 @@ static int p54_parse_eeprom(struct ieee80211_hw *dev, void *eeprom, int len) } if (err) goto err; - - } + } + break; case PDR_PRISM_ZIF_TX_IQ_CALIBRATION: priv->iq_autocal = kmalloc(data_len, GFP_KERNEL); if (!priv->iq_autocal) { @@ -745,7 +745,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) struct ieee80211_tx_info *info = IEEE80211_SKB_CB(entry); struct p54_hdr *entry_hdr; struct p54_tx_data *entry_data; - int pad = 0; + unsigned int pad = 0, frame_len; range = (void *)info->rate_driver_data; if (range->start_addr != addr) { @@ -768,6 +768,7 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) __skb_unlink(entry, &priv->tx_queue); spin_unlock_irqrestore(&priv->tx_queue.lock, flags); + frame_len = entry->len; entry_hdr = (struct p54_hdr *) entry->data; entry_data = (struct p54_tx_data *) entry_hdr->data; priv->tx_stats[entry_data->hw_queue].len--; @@ -814,15 +815,28 @@ static void p54_rx_frame_sent(struct ieee80211_hw *dev, struct sk_buff *skb) info->status.ack_signal = p54_rssi_to_dbm(dev, (int)payload->ack_rssi); - if (entry_data->key_type == P54_CRYPTO_TKIPMICHAEL) { + /* Undo all changes to the frame. */ + switch (entry_data->key_type) { + case P54_CRYPTO_TKIPMICHAEL: { u8 *iv = (u8 *)(entry_data->align + pad + - entry_data->crypt_offset); + entry_data->crypt_offset); /* Restore the original TKIP IV. */ iv[2] = iv[0]; iv[0] = iv[1]; iv[1] = (iv[0] | 0x20) & 0x7f; /* WEPSeed - 8.3.2.2 */ + + frame_len -= 12; /* remove TKIP_MMIC + TKIP_ICV */ + break; + } + case P54_CRYPTO_AESCCMP: + frame_len -= 8; /* remove CCMP_MIC */ + break; + case P54_CRYPTO_WEP: + frame_len -= 4; /* remove WEP_ICV */ + break; } + skb_trim(entry, frame_len); skb_pull(entry, sizeof(*hdr) + pad + sizeof(*entry_data)); ieee80211_tx_status_irqsafe(dev, entry); goto out; @@ -1147,7 +1161,7 @@ static int p54_set_tim(struct ieee80211_hw *dev, struct ieee80211_sta *sta, skb = p54_alloc_skb(dev, P54_HDR_FLAG_CONTROL_OPSET, sizeof(struct p54_hdr) + sizeof(*tim), - P54_CONTROL_TYPE_TIM, GFP_KERNEL); + P54_CONTROL_TYPE_TIM, GFP_ATOMIC); if (!skb) return -ENOMEM; @@ -1610,7 +1624,7 @@ static int p54_scan(struct ieee80211_hw *dev, u16 mode, u16 dwell) err: printk(KERN_ERR "%s: frequency change failed\n", wiphy_name(dev->wiphy)); - kfree_skb(skb); + p54_free_skb(dev, skb); return -EINVAL; } @@ -2077,7 +2091,7 @@ static int p54_set_key(struct ieee80211_hw *dev, enum set_key_cmd cmd, algo = P54_CRYPTO_AESCCMP; break; default: - return -EINVAL; + return -EOPNOTSUPP; } } diff --git a/drivers/net/wireless/p54/p54usb.c b/drivers/net/wireless/p54/p54usb.c index 6a6a72f6f82..5de2ebfb28c 100644 --- a/drivers/net/wireless/p54/p54usb.c +++ b/drivers/net/wireless/p54/p54usb.c @@ -144,11 +144,8 @@ static void p54u_tx_cb(struct urb *urb) struct sk_buff *skb = urb->context; struct ieee80211_hw *dev = (struct ieee80211_hw *) usb_get_intfdata(usb_ifnum_to_if(urb->dev, 0)); - struct p54u_priv *priv = dev->priv; - skb_pull(skb, priv->common.tx_hdr_len); - if (FREE_AFTER_TX(skb)) - p54_free_skb(dev, skb); + p54_free_skb(dev, skb); } static void p54u_tx_dummy_cb(struct urb *urb) { } @@ -230,7 +227,10 @@ static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb) p54u_tx_dummy_cb, dev); usb_fill_bulk_urb(data_urb, priv->udev, usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), - skb->data, skb->len, p54u_tx_cb, skb); + skb->data, skb->len, FREE_AFTER_TX(skb) ? + p54u_tx_cb : p54u_tx_dummy_cb, skb); + addr_urb->transfer_flags |= URB_ZERO_PACKET; + data_urb->transfer_flags |= URB_ZERO_PACKET; usb_anchor_urb(addr_urb, &priv->submitted); err = usb_submit_urb(addr_urb, GFP_ATOMIC); @@ -239,7 +239,7 @@ static void p54u_tx_3887(struct ieee80211_hw *dev, struct sk_buff *skb) goto out; } - usb_anchor_urb(addr_urb, &priv->submitted); + usb_anchor_urb(data_urb, &priv->submitted); err = usb_submit_urb(data_urb, GFP_ATOMIC); if (err) usb_unanchor_urb(data_urb); @@ -269,28 +269,24 @@ static void p54u_tx_lm87(struct ieee80211_hw *dev, struct sk_buff *skb) { struct p54u_priv *priv = dev->priv; struct urb *data_urb; - struct lm87_tx_hdr *hdr; - __le32 checksum; - __le32 addr = ((struct p54_hdr *)skb->data)->req_id; + struct lm87_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr); data_urb = usb_alloc_urb(0, GFP_ATOMIC); if (!data_urb) return; - checksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len); - hdr = (struct lm87_tx_hdr *)skb_push(skb, sizeof(*hdr)); - hdr->chksum = checksum; - hdr->device_addr = addr; + hdr->chksum = p54u_lm87_chksum((__le32 *)skb->data, skb->len); + hdr->device_addr = ((struct p54_hdr *)skb->data)->req_id; usb_fill_bulk_urb(data_urb, priv->udev, usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), - skb->data, skb->len, p54u_tx_cb, skb); + hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ? + p54u_tx_cb : p54u_tx_dummy_cb, skb); data_urb->transfer_flags |= URB_ZERO_PACKET; usb_anchor_urb(data_urb, &priv->submitted); if (usb_submit_urb(data_urb, GFP_ATOMIC)) { usb_unanchor_urb(data_urb); - skb_pull(skb, sizeof(*hdr)); p54_free_skb(dev, skb); } usb_free_urb(data_urb); @@ -300,11 +296,9 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb) { struct p54u_priv *priv = dev->priv; struct urb *int_urb, *data_urb; - struct net2280_tx_hdr *hdr; + struct net2280_tx_hdr *hdr = (void *)skb->data - sizeof(*hdr); struct net2280_reg_write *reg; int err = 0; - __le32 addr = ((struct p54_hdr *) skb->data)->req_id; - __le16 len = cpu_to_le16(skb->len); reg = kmalloc(sizeof(*reg), GFP_ATOMIC); if (!reg) @@ -327,10 +321,9 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb) reg->addr = cpu_to_le32(P54U_DEV_BASE); reg->val = cpu_to_le32(ISL38XX_DEV_INT_DATA); - hdr = (void *)skb_push(skb, sizeof(*hdr)); memset(hdr, 0, sizeof(*hdr)); - hdr->len = len; - hdr->device_addr = addr; + hdr->len = cpu_to_le16(skb->len); + hdr->device_addr = ((struct p54_hdr *) skb->data)->req_id; usb_fill_bulk_urb(int_urb, priv->udev, usb_sndbulkpipe(priv->udev, P54U_PIPE_DEV), reg, sizeof(*reg), @@ -341,11 +334,13 @@ static void p54u_tx_net2280(struct ieee80211_hw *dev, struct sk_buff *skb) * free what's inside the transfer_buffer after the callback routine * has completed. */ - int_urb->transfer_flags |= URB_FREE_BUFFER; + int_urb->transfer_flags |= URB_FREE_BUFFER | URB_ZERO_PACKET; usb_fill_bulk_urb(data_urb, priv->udev, usb_sndbulkpipe(priv->udev, P54U_PIPE_DATA), - skb->data, skb->len, p54u_tx_cb, skb); + hdr, skb->len + sizeof(*hdr), FREE_AFTER_TX(skb) ? + p54u_tx_cb : p54u_tx_dummy_cb, skb); + data_urb->transfer_flags |= URB_ZERO_PACKET; usb_anchor_urb(int_urb, &priv->submitted); err = usb_submit_urb(int_urb, GFP_ATOMIC); diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index 607ce9f61b5..ed93ac41297 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -1649,9 +1649,7 @@ static char *rndis_translate_scan(struct net_device *dev, char *end_buf, struct ndis_80211_bssid_ex *bssid) { -#ifdef DEBUG struct usbnet *usbdev = netdev_priv(dev); -#endif u8 *ie; char *current_val; int bssid_len, ie_len, i; diff --git a/drivers/net/wireless/rt2x00/rt2x00queue.c b/drivers/net/wireless/rt2x00/rt2x00queue.c index 746a8f36b93..0709decec9c 100644 --- a/drivers/net/wireless/rt2x00/rt2x00queue.c +++ b/drivers/net/wireless/rt2x00/rt2x00queue.c @@ -154,6 +154,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, struct rt2x00_dev *rt2x00dev = entry->queue->rt2x00dev; struct ieee80211_tx_info *tx_info = IEEE80211_SKB_CB(entry->skb); struct ieee80211_hdr *hdr = (struct ieee80211_hdr *)entry->skb->data; + struct ieee80211_tx_rate *txrate = &tx_info->control.rates[0]; struct ieee80211_rate *rate = ieee80211_get_tx_rate(rt2x00dev->hw, tx_info); const struct rt2x00_rate *hwrate; @@ -313,7 +314,7 @@ static void rt2x00queue_create_tx_descriptor(struct queue_entry *entry, * When preamble is enabled we should set the * preamble bit for the signal. */ - if (rate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) + if (txrate->flags & IEEE80211_TX_RC_USE_SHORT_PREAMBLE) txdesc->signal |= 0x08; } } diff --git a/drivers/net/wireless/rt2x00/rt2x00rfkill.c b/drivers/net/wireless/rt2x00/rt2x00rfkill.c index c3f53a92180..3298cae1e12 100644 --- a/drivers/net/wireless/rt2x00/rt2x00rfkill.c +++ b/drivers/net/wireless/rt2x00/rt2x00rfkill.c @@ -162,7 +162,7 @@ void rt2x00rfkill_allocate(struct rt2x00_dev *rt2x00dev) void rt2x00rfkill_free(struct rt2x00_dev *rt2x00dev) { - if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->flags)) + if (!test_bit(RFKILL_STATE_ALLOCATED, &rt2x00dev->rfkill_state)) return; cancel_delayed_work_sync(&rt2x00dev->rfkill_work); diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c index 6ad6bac3770..22bc07ef2f3 100644 --- a/drivers/net/wireless/rtl818x/rtl8187_dev.c +++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c @@ -273,6 +273,7 @@ static int rtl8187_tx(struct ieee80211_hw *dev, struct sk_buff *skb) usb_fill_bulk_urb(urb, priv->udev, usb_sndbulkpipe(priv->udev, ep), buf, skb->len, rtl8187_tx_cb, skb); + urb->transfer_flags |= URB_ZERO_PACKET; usb_anchor_urb(urb, &priv->anchored); rc = usb_submit_urb(urb, GFP_ATOMIC); if (rc < 0) { diff --git a/drivers/net/wireless/zd1211rw/zd_usb.c b/drivers/net/wireless/zd1211rw/zd_usb.c index b5db57d2fcf..17527f765b3 100644 --- a/drivers/net/wireless/zd1211rw/zd_usb.c +++ b/drivers/net/wireless/zd1211rw/zd_usb.c @@ -84,6 +84,7 @@ static struct usb_device_id usb_ids[] = { { USB_DEVICE(0x0586, 0x340a), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x0471, 0x1237), .driver_info = DEVICE_ZD1211B }, { USB_DEVICE(0x07fa, 0x1196), .driver_info = DEVICE_ZD1211B }, + { USB_DEVICE(0x0df6, 0x0036), .driver_info = DEVICE_ZD1211B }, /* "Driverless" devices that need ejecting */ { USB_DEVICE(0x0ace, 0x2011), .driver_info = DEVICE_INSTALLER }, { USB_DEVICE(0x0ace, 0x20ff), .driver_info = DEVICE_INSTALLER }, diff --git a/drivers/oprofile/buffer_sync.c b/drivers/oprofile/buffer_sync.c index 9da5a4b8113..c3ea5fa7d05 100644 --- a/drivers/oprofile/buffer_sync.c +++ b/drivers/oprofile/buffer_sync.c @@ -38,7 +38,7 @@ static LIST_HEAD(dying_tasks); static LIST_HEAD(dead_tasks); -static cpumask_t marked_cpus = CPU_MASK_NONE; +static cpumask_var_t marked_cpus; static DEFINE_SPINLOCK(task_mortuary); static void process_task_mortuary(void); @@ -456,10 +456,10 @@ static void mark_done(int cpu) { int i; - cpu_set(cpu, marked_cpus); + cpumask_set_cpu(cpu, marked_cpus); for_each_online_cpu(i) { - if (!cpu_isset(i, marked_cpus)) + if (!cpumask_test_cpu(i, marked_cpus)) return; } @@ -468,7 +468,7 @@ static void mark_done(int cpu) */ process_task_mortuary(); - cpus_clear(marked_cpus); + cpumask_clear(marked_cpus); } @@ -565,6 +565,20 @@ void sync_buffer(int cpu) mutex_unlock(&buffer_mutex); } +int __init buffer_sync_init(void) +{ + if (!alloc_cpumask_var(&marked_cpus, GFP_KERNEL)) + return -ENOMEM; + + cpumask_clear(marked_cpus); + return 0; +} + +void __exit buffer_sync_cleanup(void) +{ + free_cpumask_var(marked_cpus); +} + /* The function can be used to add a buffer worth of data directly to * the kernel buffer. The buffer is assumed to be a circular buffer. * Take the entries from index start and end at index end, wrapping diff --git a/drivers/oprofile/buffer_sync.h b/drivers/oprofile/buffer_sync.h index 3110732c183..0ebf5db6267 100644 --- a/drivers/oprofile/buffer_sync.h +++ b/drivers/oprofile/buffer_sync.h @@ -19,4 +19,8 @@ void sync_stop(void); /* sync the given CPU's buffer */ void sync_buffer(int cpu); +/* initialize/destroy the buffer system. */ +int buffer_sync_init(void); +void buffer_sync_cleanup(void); + #endif /* OPROFILE_BUFFER_SYNC_H */ diff --git a/drivers/oprofile/cpu_buffer.c b/drivers/oprofile/cpu_buffer.c index 2e03b6d796d..e76d715e434 100644 --- a/drivers/oprofile/cpu_buffer.c +++ b/drivers/oprofile/cpu_buffer.c @@ -393,16 +393,21 @@ oprofile_write_reserve(struct op_entry *entry, struct pt_regs * const regs, return; fail: + entry->event = NULL; cpu_buf->sample_lost_overflow++; } int oprofile_add_data(struct op_entry *entry, unsigned long val) { + if (!entry->event) + return 0; return op_cpu_buffer_add_data(entry, val); } int oprofile_write_commit(struct op_entry *entry) { + if (!entry->event) + return -EINVAL; return op_cpu_buffer_write_commit(entry); } diff --git a/drivers/oprofile/cpu_buffer.h b/drivers/oprofile/cpu_buffer.h index 63f81c44846..272995d2029 100644 --- a/drivers/oprofile/cpu_buffer.h +++ b/drivers/oprofile/cpu_buffer.h @@ -66,6 +66,13 @@ static inline void op_cpu_buffer_reset(int cpu) cpu_buf->last_task = NULL; } +/* + * op_cpu_buffer_add_data() and op_cpu_buffer_write_commit() may be + * called only if op_cpu_buffer_write_reserve() did not return NULL or + * entry->event != NULL, otherwise entry->size or entry->event will be + * used uninitialized. + */ + struct op_sample *op_cpu_buffer_write_reserve(struct op_entry *entry, unsigned long size); int op_cpu_buffer_write_commit(struct op_entry *entry); diff --git a/drivers/oprofile/oprof.c b/drivers/oprofile/oprof.c index 3cffce90f82..ced39f60229 100644 --- a/drivers/oprofile/oprof.c +++ b/drivers/oprofile/oprof.c @@ -183,6 +183,10 @@ static int __init oprofile_init(void) { int err; + err = buffer_sync_init(); + if (err) + return err; + err = oprofile_arch_init(&oprofile_ops); if (err < 0 || timer) { @@ -191,8 +195,10 @@ static int __init oprofile_init(void) } err = oprofilefs_register(); - if (err) + if (err) { oprofile_arch_exit(); + buffer_sync_cleanup(); + } return err; } @@ -202,6 +208,7 @@ static void __exit oprofile_exit(void) { oprofilefs_unregister(); oprofile_arch_exit(); + buffer_sync_cleanup(); } diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index 5482d4ed825..c2485542f54 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -126,8 +126,10 @@ static int set_lock_status(struct hotplug_slot *hotplug_slot, u8 status) mutex_lock(&slot->ctrl->crit_sect); /* has it been >1 sec since our last toggle? */ - if ((get_seconds() - slot->last_emi_toggle) < 1) + if ((get_seconds() - slot->last_emi_toggle) < 1) { + mutex_unlock(&slot->ctrl->crit_sect); return -EINVAL; + } /* see what our current state is */ retval = get_lock_status(hotplug_slot, &value); diff --git a/drivers/pci/intr_remapping.c b/drivers/pci/intr_remapping.c index f78371b2252..5a57753ea9f 100644 --- a/drivers/pci/intr_remapping.c +++ b/drivers/pci/intr_remapping.c @@ -6,6 +6,7 @@ #include <linux/irq.h> #include <asm/io_apic.h> #include <asm/smp.h> +#include <asm/cpu.h> #include <linux/intel-iommu.h> #include "intr_remapping.h" diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c index b4a90badd0a..896a15d70f5 100644 --- a/drivers/pci/msi.c +++ b/drivers/pci/msi.c @@ -398,21 +398,19 @@ static int msi_capability_init(struct pci_dev *dev) entry->msi_attrib.masked = 1; entry->msi_attrib.default_irq = dev->irq; /* Save IOAPIC IRQ */ entry->msi_attrib.pos = pos; - if (entry->msi_attrib.maskbit) { - entry->mask_base = (void __iomem *)(long)msi_mask_bits_reg(pos, - entry->msi_attrib.is_64); - } entry->dev = dev; if (entry->msi_attrib.maskbit) { - unsigned int maskbits, temp; + unsigned int base, maskbits, temp; + + base = msi_mask_bits_reg(pos, entry->msi_attrib.is_64); + entry->mask_base = (void __iomem *)(long)base; + /* All MSIs are unmasked by default, Mask them all */ - pci_read_config_dword(dev, - msi_mask_bits_reg(pos, entry->msi_attrib.is_64), - &maskbits); + pci_read_config_dword(dev, base, &maskbits); temp = (1 << multi_msi_capable(control)); temp = ((temp - 1) & ~temp); maskbits |= temp; - pci_write_config_dword(dev, entry->msi_attrib.is_64, maskbits); + pci_write_config_dword(dev, base, maskbits); entry->msi_attrib.maskbits_mask = temp; } list_add_tail(&entry->list, &dev->msi_list); diff --git a/drivers/pci/pci-driver.c b/drivers/pci/pci-driver.c index c697f268085..9de07b75b99 100644 --- a/drivers/pci/pci-driver.c +++ b/drivers/pci/pci-driver.c @@ -355,17 +355,27 @@ static int pci_legacy_suspend(struct device *dev, pm_message_t state) int i = 0; if (drv && drv->suspend) { + pci_dev->state_saved = false; + i = drv->suspend(pci_dev, state); suspend_report_result(drv->suspend, i); - } else { - pci_save_state(pci_dev); - /* - * This is for compatibility with existing code with legacy PM - * support. - */ - pci_pm_set_unknown_state(pci_dev); + if (i) + return i; + + if (pci_dev->state_saved) + goto Fixup; + + if (WARN_ON_ONCE(pci_dev->current_state != PCI_D0)) + goto Fixup; } + pci_save_state(pci_dev); + /* + * This is for compatibility with existing code with legacy PM support. + */ + pci_pm_set_unknown_state(pci_dev); + + Fixup: pci_fixup_device(pci_fixup_suspend, pci_dev); return i; @@ -386,81 +396,34 @@ static int pci_legacy_suspend_late(struct device *dev, pm_message_t state) static int pci_legacy_resume_early(struct device *dev) { - int error = 0; struct pci_dev * pci_dev = to_pci_dev(dev); struct pci_driver * drv = pci_dev->driver; - pci_fixup_device(pci_fixup_resume_early, pci_dev); - - if (drv && drv->resume_early) - error = drv->resume_early(pci_dev); - return error; + return drv && drv->resume_early ? + drv->resume_early(pci_dev) : 0; } static int pci_legacy_resume(struct device *dev) { - int error; struct pci_dev * pci_dev = to_pci_dev(dev); struct pci_driver * drv = pci_dev->driver; pci_fixup_device(pci_fixup_resume, pci_dev); - if (drv && drv->resume) { - error = drv->resume(pci_dev); - } else { - /* restore the PCI config space */ - pci_restore_state(pci_dev); - error = pci_pm_reenable_device(pci_dev); - } - return error; + return drv && drv->resume ? + drv->resume(pci_dev) : pci_pm_reenable_device(pci_dev); } /* Auxiliary functions used by the new power management framework */ -static int pci_restore_standard_config(struct pci_dev *pci_dev) -{ - struct pci_dev *parent = pci_dev->bus->self; - int error = 0; - - /* Check if the device's bus is operational */ - if (!parent || parent->current_state == PCI_D0) { - pci_restore_state(pci_dev); - pci_update_current_state(pci_dev, PCI_D0); - } else { - dev_warn(&pci_dev->dev, "unable to restore config, " - "bridge %s in low power state D%d\n", pci_name(parent), - parent->current_state); - pci_dev->current_state = PCI_UNKNOWN; - error = -EAGAIN; - } - - return error; -} - -static bool pci_is_bridge(struct pci_dev *pci_dev) -{ - return !!(pci_dev->subordinate); -} - static void pci_pm_default_resume_noirq(struct pci_dev *pci_dev) { - if (pci_restore_standard_config(pci_dev)) - pci_fixup_device(pci_fixup_resume_early, pci_dev); + pci_restore_standard_config(pci_dev); + pci_fixup_device(pci_fixup_resume_early, pci_dev); } static int pci_pm_default_resume(struct pci_dev *pci_dev) { - /* - * pci_restore_standard_config() should have been called once already, - * but it would have failed if the device's parent bridge had not been - * in power state D0 at that time. Check it and try again if necessary. - */ - if (pci_dev->current_state == PCI_UNKNOWN) { - int error = pci_restore_standard_config(pci_dev); - if (error) - return error; - } - pci_fixup_device(pci_fixup_resume, pci_dev); if (!pci_is_bridge(pci_dev)) @@ -575,11 +538,11 @@ static int pci_pm_resume_noirq(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; + pci_pm_default_resume_noirq(pci_dev); + if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume_early(dev); - pci_pm_default_resume_noirq(pci_dev); - if (drv && drv->pm && drv->pm->resume_noirq) error = drv->pm->resume_noirq(dev); @@ -730,11 +693,11 @@ static int pci_pm_restore_noirq(struct device *dev) struct device_driver *drv = dev->driver; int error = 0; + pci_pm_default_resume_noirq(pci_dev); + if (pci_has_legacy_pm_support(pci_dev)) return pci_legacy_resume_early(dev); - pci_pm_default_resume_noirq(pci_dev); - if (drv && drv->pm && drv->pm->restore_noirq) error = drv->pm->restore_noirq(dev); diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c index e491fdedf70..17bd9325a24 100644 --- a/drivers/pci/pci.c +++ b/drivers/pci/pci.c @@ -22,7 +22,7 @@ #include <asm/dma.h> /* isa_dma_bridge_buggy */ #include "pci.h" -unsigned int pci_pm_d3_delay = 10; +unsigned int pci_pm_d3_delay = PCI_PM_D3_WAIT; #ifdef CONFIG_PCI_DOMAINS int pci_domains_supported = 1; @@ -426,6 +426,7 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) * given PCI device * @dev: PCI device to handle. * @state: PCI power state (D0, D1, D2, D3hot) to put the device into. + * @wait: If 'true', wait for the device to change its power state * * RETURN VALUE: * -EINVAL if the requested state is invalid. @@ -435,7 +436,7 @@ static inline int platform_pci_sleep_wake(struct pci_dev *dev, bool enable) * 0 if device's power state has been successfully changed. */ static int -pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) +pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state, bool wait) { u16 pmcsr; bool need_restore = false; @@ -480,8 +481,10 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) break; case PCI_UNKNOWN: /* Boot-up */ if ((pmcsr & PCI_PM_CTRL_STATE_MASK) == PCI_D3hot - && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) + && !(pmcsr & PCI_PM_CTRL_NO_SOFT_RESET)) { need_restore = true; + wait = true; + } /* Fall-through: force to D0 */ default: pmcsr = 0; @@ -491,12 +494,15 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) /* enter specified state */ pci_write_config_word(dev, dev->pm_cap + PCI_PM_CTRL, pmcsr); + if (!wait) + return 0; + /* Mandatory power management transition delays */ /* see PCI PM 1.1 5.6.1 table 18 */ if (state == PCI_D3hot || dev->current_state == PCI_D3hot) msleep(pci_pm_d3_delay); else if (state == PCI_D2 || dev->current_state == PCI_D2) - udelay(200); + udelay(PCI_PM_D2_DELAY); dev->current_state = state; @@ -515,7 +521,7 @@ pci_raw_set_power_state(struct pci_dev *dev, pci_power_t state) if (need_restore) pci_restore_bars(dev); - if (dev->bus->self) + if (wait && dev->bus->self) pcie_aspm_pm_state_change(dev->bus->self); return 0; @@ -585,7 +591,7 @@ int pci_set_power_state(struct pci_dev *dev, pci_power_t state) if (state == PCI_D3hot && (dev->dev_flags & PCI_DEV_FLAGS_NO_D3)) return 0; - error = pci_raw_set_power_state(dev, state); + error = pci_raw_set_power_state(dev, state, true); if (state > PCI_D0 && platform_pci_power_manageable(dev)) { /* Allow the platform to finalize the transition */ @@ -730,6 +736,7 @@ pci_save_state(struct pci_dev *dev) /* XXX: 100% dword access ok here? */ for (i = 0; i < 16; i++) pci_read_config_dword(dev, i * 4,&dev->saved_config_space[i]); + dev->state_saved = true; if ((i = pci_save_pcie_state(dev)) != 0) return i; if ((i = pci_save_pcix_state(dev)) != 0) @@ -1374,6 +1381,50 @@ void pci_allocate_cap_save_buffers(struct pci_dev *dev) } /** + * pci_restore_standard_config - restore standard config registers of PCI device + * @dev: PCI device to handle + * + * This function assumes that the device's configuration space is accessible. + * If the device needs to be powered up, the function will wait for it to + * change the state. + */ +int pci_restore_standard_config(struct pci_dev *dev) +{ + pci_power_t prev_state; + int error; + + pci_restore_state(dev); + pci_update_current_state(dev, PCI_D0); + + prev_state = dev->current_state; + if (prev_state == PCI_D0) + return 0; + + error = pci_raw_set_power_state(dev, PCI_D0, false); + if (error) + return error; + + if (pci_is_bridge(dev)) { + if (prev_state > PCI_D1) + mdelay(PCI_PM_BUS_WAIT); + } else { + switch(prev_state) { + case PCI_D3cold: + case PCI_D3hot: + mdelay(pci_pm_d3_delay); + break; + case PCI_D2: + udelay(PCI_PM_D2_DELAY); + break; + } + } + + dev->current_state = PCI_D0; + + return 0; +} + +/** * pci_enable_ari - enable ARI forwarding if hardware support it * @dev: the PCI device */ diff --git a/drivers/pci/pci.h b/drivers/pci/pci.h index 1351bb4addd..26ddf78ac30 100644 --- a/drivers/pci/pci.h +++ b/drivers/pci/pci.h @@ -49,6 +49,12 @@ extern void pci_disable_enabled_device(struct pci_dev *dev); extern void pci_pm_init(struct pci_dev *dev); extern void platform_pci_wakeup_init(struct pci_dev *dev); extern void pci_allocate_cap_save_buffers(struct pci_dev *dev); +extern int pci_restore_standard_config(struct pci_dev *dev); + +static inline bool pci_is_bridge(struct pci_dev *pci_dev) +{ + return !!(pci_dev->subordinate); +} extern int pci_user_read_config_byte(struct pci_dev *dev, int where, u8 *val); extern int pci_user_read_config_word(struct pci_dev *dev, int where, u16 *val); diff --git a/drivers/power/pda_power.c b/drivers/power/pda_power.c index d30bb766fce..b56a704409d 100644 --- a/drivers/power/pda_power.c +++ b/drivers/power/pda_power.c @@ -20,7 +20,7 @@ static inline unsigned int get_irq_flags(struct resource *res) { - unsigned int flags = IRQF_DISABLED | IRQF_SHARED; + unsigned int flags = IRQF_SAMPLE_RANDOM | IRQF_SHARED; flags |= res->flags & IRQF_TRIGGER_MASK; diff --git a/drivers/s390/net/lcs.c b/drivers/s390/net/lcs.c index acca6678cb2..49c3bfa1afd 100644 --- a/drivers/s390/net/lcs.c +++ b/drivers/s390/net/lcs.c @@ -70,7 +70,9 @@ static char debug_buffer[255]; static void lcs_tasklet(unsigned long); static void lcs_start_kernel_thread(struct work_struct *); static void lcs_get_frames_cb(struct lcs_channel *, struct lcs_buffer *); +#ifdef CONFIG_IP_MULTICAST static int lcs_send_delipm(struct lcs_card *, struct lcs_ipm_list *); +#endif /* CONFIG_IP_MULTICAST */ static int lcs_recovery(void *ptr); /** @@ -1285,6 +1287,8 @@ out: lcs_clear_thread_running_bit(card, LCS_SET_MC_THREAD); return 0; } +#endif /* CONFIG_IP_MULTICAST */ + /** * function called by net device to * handle multicast address relevant things @@ -1292,6 +1296,7 @@ out: static void lcs_set_multicast_list(struct net_device *dev) { +#ifdef CONFIG_IP_MULTICAST struct lcs_card *card; LCS_DBF_TEXT(4, trace, "setmulti"); @@ -1299,9 +1304,8 @@ lcs_set_multicast_list(struct net_device *dev) if (!lcs_set_thread_start_bit(card, LCS_SET_MC_THREAD)) schedule_work(&card->kernel_thread_starter); -} - #endif /* CONFIG_IP_MULTICAST */ +} static long lcs_check_irb_error(struct ccw_device *cdev, struct irb *irb) diff --git a/drivers/scsi/ibmvscsi/ibmvfc.c b/drivers/scsi/ibmvscsi/ibmvfc.c index 91ef669d98f..a1a511bdec8 100644 --- a/drivers/scsi/ibmvscsi/ibmvfc.c +++ b/drivers/scsi/ibmvscsi/ibmvfc.c @@ -1322,7 +1322,9 @@ static int ibmvfc_map_sg_data(struct scsi_cmnd *scmd, &evt->ext_list_token); if (!evt->ext_list) { - scmd_printk(KERN_ERR, scmd, "Can't allocate memory for scatterlist\n"); + scsi_dma_unmap(scmd); + if (vhost->log_level > IBMVFC_DEFAULT_LOG_LEVEL) + scmd_printk(KERN_ERR, scmd, "Can't allocate memory for scatterlist\n"); return -ENOMEM; } } diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c index 7225b6e2029..257c24115de 100644 --- a/drivers/scsi/libiscsi.c +++ b/drivers/scsi/libiscsi.c @@ -1981,6 +1981,7 @@ void iscsi_pool_free(struct iscsi_pool *q) kfree(q->pool[i]); if (q->pool) kfree(q->pool); + kfree(q->queue); } EXPORT_SYMBOL_GPL(iscsi_pool_free); diff --git a/drivers/scsi/qla2xxx/qla_attr.c b/drivers/scsi/qla2xxx/qla_attr.c index c7acef50d5d..33a3c13fd89 100644 --- a/drivers/scsi/qla2xxx/qla_attr.c +++ b/drivers/scsi/qla2xxx/qla_attr.c @@ -1016,6 +1016,9 @@ qla2x00_dev_loss_tmo_callbk(struct fc_rport *rport) struct Scsi_Host *host = rport_to_shost(rport); fc_port_t *fcport = *(fc_port_t **)rport->dd_data; + if (!fcport) + return; + qla2x00_abort_fcport_cmds(fcport); /* @@ -1033,6 +1036,9 @@ qla2x00_terminate_rport_io(struct fc_rport *rport) { fc_port_t *fcport = *(fc_port_t **)rport->dd_data; + if (!fcport) + return; + /* * At this point all fcport's software-states are cleared. Perform any * final cleanup of firmware resources (PCBs and XCBs). diff --git a/drivers/scsi/qla2xxx/qla_gbl.h b/drivers/scsi/qla2xxx/qla_gbl.h index ba491335375..a336b4bc81a 100644 --- a/drivers/scsi/qla2xxx/qla_gbl.h +++ b/drivers/scsi/qla2xxx/qla_gbl.h @@ -34,6 +34,7 @@ extern void qla24xx_update_fw_options(scsi_qla_host_t *); extern void qla81xx_update_fw_options(scsi_qla_host_t *); extern int qla2x00_load_risc(struct scsi_qla_host *, uint32_t *); extern int qla24xx_load_risc(scsi_qla_host_t *, uint32_t *); +extern int qla81xx_load_risc(scsi_qla_host_t *, uint32_t *); extern int qla2x00_loop_resync(scsi_qla_host_t *); diff --git a/drivers/scsi/qla2xxx/qla_init.c b/drivers/scsi/qla2xxx/qla_init.c index 9ad4d0968e5..f6368a1d302 100644 --- a/drivers/scsi/qla2xxx/qla_init.c +++ b/drivers/scsi/qla2xxx/qla_init.c @@ -3562,6 +3562,9 @@ qla24xx_reset_adapter(scsi_qla_host_t *vha) WRT_REG_DWORD(®->hccr, HCCRX_REL_RISC_PAUSE); RD_REG_DWORD(®->hccr); spin_unlock_irqrestore(&ha->hardware_lock, flags); + + if (IS_NOPOLLING_TYPE(ha)) + ha->isp_ops->enable_intrs(ha); } /* On sparc systems, obtain port and node WWN from firmware @@ -3847,6 +3850,10 @@ qla24xx_load_risc_flash(scsi_qla_host_t *vha, uint32_t *srisc_addr) uint32_t i; struct qla_hw_data *ha = vha->hw; struct req_que *req = ha->req_q_map[0]; + + qla_printk(KERN_INFO, ha, + "FW: Loading from flash (%x)...\n", ha->flt_region_fw); + rval = QLA_SUCCESS; segments = FA_RISC_CODE_SEGMENTS; @@ -4022,8 +4029,8 @@ fail_fw_integrity: return QLA_FUNCTION_FAILED; } -int -qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) +static int +qla24xx_load_risc_blob(scsi_qla_host_t *vha, uint32_t *srisc_addr) { int rval; int segments, fragment; @@ -4043,12 +4050,12 @@ qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) qla_printk(KERN_ERR, ha, "Firmware images can be retrieved " "from: " QLA_FW_URL ".\n"); - /* Try to load RISC code from flash. */ - qla_printk(KERN_ERR, ha, "Attempting to load (potentially " - "outdated) firmware from flash.\n"); - return qla24xx_load_risc_flash(vha, srisc_addr); + return QLA_FUNCTION_FAILED; } + qla_printk(KERN_INFO, ha, + "FW: Loading via request-firmware...\n"); + rval = QLA_SUCCESS; segments = FA_RISC_CODE_SEGMENTS; @@ -4133,6 +4140,40 @@ fail_fw_integrity: return QLA_FUNCTION_FAILED; } +int +qla24xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) +{ + int rval; + + /* + * FW Load priority: + * 1) Firmware via request-firmware interface (.bin file). + * 2) Firmware residing in flash. + */ + rval = qla24xx_load_risc_blob(vha, srisc_addr); + if (rval == QLA_SUCCESS) + return rval; + + return qla24xx_load_risc_flash(vha, srisc_addr); +} + +int +qla81xx_load_risc(scsi_qla_host_t *vha, uint32_t *srisc_addr) +{ + int rval; + + /* + * FW Load priority: + * 1) Firmware residing in flash. + * 2) Firmware via request-firmware interface (.bin file). + */ + rval = qla24xx_load_risc_flash(vha, srisc_addr); + if (rval == QLA_SUCCESS) + return rval; + + return qla24xx_load_risc_blob(vha, srisc_addr); +} + void qla2x00_try_to_stop_firmware(scsi_qla_host_t *vha) { diff --git a/drivers/scsi/qla2xxx/qla_isr.c b/drivers/scsi/qla2xxx/qla_isr.c index 789fc576f22..e28ad81baf1 100644 --- a/drivers/scsi/qla2xxx/qla_isr.c +++ b/drivers/scsi/qla2xxx/qla_isr.c @@ -1868,6 +1868,7 @@ qla24xx_disable_msix(struct qla_hw_data *ha) static int qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp) { +#define MIN_MSIX_COUNT 2 int i, ret; struct msix_entry *entries; struct qla_msix_entry *qentry; @@ -1883,12 +1884,16 @@ qla24xx_enable_msix(struct qla_hw_data *ha, struct rsp_que *rsp) ret = pci_enable_msix(ha->pdev, entries, ha->msix_count); if (ret) { + if (ret < MIN_MSIX_COUNT) + goto msix_failed; + qla_printk(KERN_WARNING, ha, "MSI-X: Failed to enable support -- %d/%d\n" " Retry with %d vectors\n", ha->msix_count, ret, ret); ha->msix_count = ret; ret = pci_enable_msix(ha->pdev, entries, ha->msix_count); if (ret) { +msix_failed: qla_printk(KERN_WARNING, ha, "MSI-X: Failed to enable" " support, giving up -- %d/%d\n", ha->msix_count, ret); diff --git a/drivers/scsi/qla2xxx/qla_mbx.c b/drivers/scsi/qla2xxx/qla_mbx.c index db4df45234a..f94ffbb98e9 100644 --- a/drivers/scsi/qla2xxx/qla_mbx.c +++ b/drivers/scsi/qla2xxx/qla_mbx.c @@ -58,14 +58,11 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) * seconds. This is to serialize actual issuing of mailbox cmds during * non ISP abort time. */ - if (!abort_active) { - if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, - mcp->tov * HZ)) { - /* Timeout occurred. Return error. */ - DEBUG2_3_11(printk("%s(%ld): cmd access timeout. " - "Exiting.\n", __func__, base_vha->host_no)); - return QLA_FUNCTION_TIMEOUT; - } + if (!wait_for_completion_timeout(&ha->mbx_cmd_comp, mcp->tov * HZ)) { + /* Timeout occurred. Return error. */ + DEBUG2_3_11(printk("%s(%ld): cmd access timeout. " + "Exiting.\n", __func__, base_vha->host_no)); + return QLA_FUNCTION_TIMEOUT; } ha->flags.mbox_busy = 1; @@ -265,8 +262,7 @@ qla2x00_mailbox_command(scsi_qla_host_t *vha, mbx_cmd_t *mcp) } /* Allow next mbx cmd to come in. */ - if (!abort_active) - complete(&ha->mbx_cmd_comp); + complete(&ha->mbx_cmd_comp); if (rval) { DEBUG2_3_11(printk("%s(%ld): **** FAILED. mbx0=%x, mbx1=%x, " diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c index cf32653fe01..c11f872d3e1 100644 --- a/drivers/scsi/qla2xxx/qla_os.c +++ b/drivers/scsi/qla2xxx/qla_os.c @@ -65,8 +65,6 @@ MODULE_PARM_DESC(ql2xextended_error_logging, static void qla2x00_free_device(scsi_qla_host_t *); -static void qla2x00_config_dma_addressing(scsi_qla_host_t *ha); - int ql2xfdmienable=1; module_param(ql2xfdmienable, int, S_IRUGO|S_IRUSR); MODULE_PARM_DESC(ql2xfdmienable, @@ -800,6 +798,7 @@ qla2xxx_eh_abort(struct scsi_cmnd *cmd) if (ha->isp_ops->abort_command(vha, sp, req)) { DEBUG2(printk("%s(%ld): abort_command " "mbx failed.\n", __func__, vha->host_no)); + ret = FAILED; } else { DEBUG3(printk("%s(%ld): abort_command " "mbx success.\n", __func__, vha->host_no)); @@ -1241,9 +1240,8 @@ qla2x00_change_queue_type(struct scsi_device *sdev, int tag_type) * supported addressing method. */ static void -qla2x00_config_dma_addressing(scsi_qla_host_t *vha) +qla2x00_config_dma_addressing(struct qla_hw_data *ha) { - struct qla_hw_data *ha = vha->hw; /* Assume a 32bit DMA mask. */ ha->flags.enable_64bit_addressing = 0; @@ -1480,7 +1478,7 @@ static struct isp_operations qla81xx_isp_ops = { .reset_adapter = qla24xx_reset_adapter, .nvram_config = qla81xx_nvram_config, .update_fw_options = qla81xx_update_fw_options, - .load_risc = qla24xx_load_risc, + .load_risc = qla81xx_load_risc, .pci_info_str = qla24xx_pci_info_str, .fw_version_str = qla24xx_fw_version_str, .intr_handler = qla24xx_intr_handler, @@ -1869,6 +1867,7 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) set_bit(0, (unsigned long *) ha->vp_idx_map); + qla2x00_config_dma_addressing(ha); ret = qla2x00_mem_alloc(ha, req_length, rsp_length, &req, &rsp); if (!ret) { qla_printk(KERN_WARNING, ha, @@ -1888,13 +1887,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) "[ERROR] Failed to allocate memory for scsi_host\n"); ret = -ENOMEM; + qla2x00_mem_free(ha); + qla2x00_free_que(ha, req, rsp); goto probe_hw_failed; } pci_set_drvdata(pdev, base_vha); - qla2x00_config_dma_addressing(base_vha); - host = base_vha->host; base_vha->req_ques[0] = req->id; host->can_queue = req->length + 128; @@ -1917,14 +1916,13 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) /* Set up the irqs */ ret = qla2x00_request_irqs(ha, rsp); if (ret) - goto probe_failed; - + goto probe_init_failed; /* Alloc arrays of request and response ring ptrs */ if (!qla2x00_alloc_queues(ha)) { qla_printk(KERN_WARNING, ha, "[ERROR] Failed to allocate memory for queue" " pointers\n"); - goto probe_failed; + goto probe_init_failed; } ha->rsp_q_map[0] = rsp; ha->req_q_map[0] = req; @@ -1997,6 +1995,10 @@ qla2x00_probe_one(struct pci_dev *pdev, const struct pci_device_id *id) return 0; +probe_init_failed: + qla2x00_free_que(ha, req, rsp); + ha->max_queues = 0; + probe_failed: qla2x00_free_device(base_vha); diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c index 303f8ee11f2..9c3b694c049 100644 --- a/drivers/scsi/qla2xxx/qla_sup.c +++ b/drivers/scsi/qla2xxx/qla_sup.c @@ -944,9 +944,9 @@ qla24xx_unprotect_flash(struct qla_hw_data *ha) if (!ha->fdt_wrt_disable) return; - /* Disable flash write-protection. */ + /* Disable flash write-protection, first clear SR protection bit */ qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0); - /* Some flash parts need an additional zero-write to clear bits.*/ + /* Then write zero again to clear remaining SR bits.*/ qla24xx_write_flash_dword(ha, flash_conf_addr(ha, 0x101), 0); } @@ -980,12 +980,11 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, uint32_t dwords) { int ret; - uint32_t liter, miter; + uint32_t liter; uint32_t sec_mask, rest_addr; - uint32_t fdata, findex; + uint32_t fdata; dma_addr_t optrom_dma; void *optrom = NULL; - uint32_t *s, *d; struct qla_hw_data *ha = vha->hw; ret = QLA_SUCCESS; @@ -1003,17 +1002,15 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, } rest_addr = (ha->fdt_block_size >> 2) - 1; - sec_mask = (ha->optrom_size >> 2) - (ha->fdt_block_size >> 2); + sec_mask = ~rest_addr; qla24xx_unprotect_flash(ha); for (liter = 0; liter < dwords; liter++, faddr++, dwptr++) { - - findex = faddr; - fdata = (findex & sec_mask) << 2; + fdata = (faddr & sec_mask) << 2; /* Are we at the beginning of a sector? */ - if ((findex & rest_addr) == 0) { + if ((faddr & rest_addr) == 0) { /* Do sector unprotect. */ if (ha->fdt_unprotect_sec_cmd) qla24xx_write_flash_dword(ha, @@ -1024,7 +1021,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, (fdata & 0xff00) |((fdata << 16) & 0xff0000) | ((fdata >> 16) & 0xff)); if (ret != QLA_SUCCESS) { - DEBUG9(qla_printk("Unable to flash sector: " + DEBUG9(qla_printk("Unable to erase sector: " "address=%x.\n", faddr)); break; } @@ -1033,9 +1030,7 @@ qla24xx_write_flash_data(scsi_qla_host_t *vha, uint32_t *dwptr, uint32_t faddr, /* Go with burst-write. */ if (optrom && (liter + OPTROM_BURST_DWORDS) <= dwords) { /* Copy data to DMA'ble buffer. */ - for (miter = 0, s = optrom, d = dwptr; - miter < OPTROM_BURST_DWORDS; miter++, s++, d++) - *s = cpu_to_le32(*d); + memcpy(optrom, dwptr, OPTROM_BURST_SIZE); ret = qla2x00_load_ram(vha, optrom_dma, flash_data_addr(ha, faddr), diff --git a/drivers/scsi/qla2xxx/qla_version.h b/drivers/scsi/qla2xxx/qla_version.h index 808bab6ef06..cfa4c11a479 100644 --- a/drivers/scsi/qla2xxx/qla_version.h +++ b/drivers/scsi/qla2xxx/qla_version.h @@ -7,7 +7,7 @@ /* * Driver version */ -#define QLA2XXX_VERSION "8.03.00-k1" +#define QLA2XXX_VERSION "8.03.00-k2" #define QLA_DRIVER_MAJOR_VER 8 #define QLA_DRIVER_MINOR_VER 3 diff --git a/drivers/scsi/qla4xxx/ql4_def.h b/drivers/scsi/qla4xxx/ql4_def.h index d6be0762eb9..b586f27c3bd 100644 --- a/drivers/scsi/qla4xxx/ql4_def.h +++ b/drivers/scsi/qla4xxx/ql4_def.h @@ -244,6 +244,7 @@ struct ddb_entry { uint8_t ip_addr[ISCSI_IPADDR_SIZE]; uint8_t iscsi_name[ISCSI_NAME_SIZE]; /* 72 x48 */ uint8_t iscsi_alias[0x20]; + uint8_t isid[6]; }; /* diff --git a/drivers/scsi/qla4xxx/ql4_init.c b/drivers/scsi/qla4xxx/ql4_init.c index 109c5f5985e..af8c3233e8a 100644 --- a/drivers/scsi/qla4xxx/ql4_init.c +++ b/drivers/scsi/qla4xxx/ql4_init.c @@ -342,8 +342,12 @@ static struct ddb_entry* qla4xxx_get_ddb_entry(struct scsi_qla_host *ha, DEBUG2(printk("scsi%ld: %s: Looking for ddb[%d]\n", ha->host_no, __func__, fw_ddb_index)); list_for_each_entry(ddb_entry, &ha->ddb_list, list) { - if (memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name, - ISCSI_NAME_SIZE) == 0) { + if ((memcmp(ddb_entry->iscsi_name, fw_ddb_entry->iscsi_name, + ISCSI_NAME_SIZE) == 0) && + (ddb_entry->tpgt == + le32_to_cpu(fw_ddb_entry->tgt_portal_grp)) && + (memcmp(ddb_entry->isid, fw_ddb_entry->isid, + sizeof(ddb_entry->isid)) == 0)) { found++; break; } @@ -430,6 +434,8 @@ static int qla4xxx_update_ddb_entry(struct scsi_qla_host *ha, ddb_entry->port = le16_to_cpu(fw_ddb_entry->port); ddb_entry->tpgt = le32_to_cpu(fw_ddb_entry->tgt_portal_grp); + memcpy(ddb_entry->isid, fw_ddb_entry->isid, sizeof(ddb_entry->isid)); + memcpy(&ddb_entry->iscsi_name[0], &fw_ddb_entry->iscsi_name[0], min(sizeof(ddb_entry->iscsi_name), sizeof(fw_ddb_entry->iscsi_name))); diff --git a/drivers/serial/8250_pci.c b/drivers/serial/8250_pci.c index 2a3671233b1..536d8e510f6 100644 --- a/drivers/serial/8250_pci.c +++ b/drivers/serial/8250_pci.c @@ -806,6 +806,8 @@ pci_default_setup(struct serial_private *priv, #define PCI_SUBDEVICE_ID_OCTPRO422 0x0208 #define PCI_SUBDEVICE_ID_POCTAL232 0x0308 #define PCI_SUBDEVICE_ID_POCTAL422 0x0408 +#define PCI_VENDOR_ID_ADVANTECH 0x13fe +#define PCI_DEVICE_ID_ADVANTECH_PCI3620 0x3620 /* Unknown vendors/cards - this should not be in linux/pci_ids.h */ #define PCI_SUBDEVICE_ID_UNKNOWN_0x1584 0x1584 @@ -2152,6 +2154,10 @@ static int pciserial_resume_one(struct pci_dev *dev) #endif static struct pci_device_id serial_pci_tbl[] = { + /* Advantech use PCI_DEVICE_ID_ADVANTECH_PCI3620 (0x3620) as 'PCI_SUBVENDOR_ID' */ + { PCI_VENDOR_ID_ADVANTECH, PCI_DEVICE_ID_ADVANTECH_PCI3620, + PCI_DEVICE_ID_ADVANTECH_PCI3620, 0x0001, 0, 0, + pbn_b2_8_921600 }, { PCI_VENDOR_ID_V3, PCI_DEVICE_ID_V3_V960, PCI_SUBVENDOR_ID_CONNECT_TECH, PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232, 0, 0, diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 3e525e38a5d..7d7f576da20 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -982,7 +982,7 @@ config SERIAL_SH_SCI_CONSOLE config SERIAL_PNX8XXX bool "Enable PNX8XXX SoCs' UART Support" - depends on MIPS && SOC_PNX8550 + depends on MIPS && (SOC_PNX8550 || SOC_PNX833X) select SERIAL_CORE help If you have a MIPS-based Philips SoC such as PNX8550 or PNX8330 diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index 338cf8a08b4..92187e28608 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -180,7 +180,7 @@ static int jsm_probe_one(struct pci_dev *pdev, const struct pci_device_id *ent) return rc; } -static void jsm_remove_one(struct pci_dev *pdev) +static void __devexit jsm_remove_one(struct pci_dev *pdev) { struct jsm_board *brd = pci_get_drvdata(pdev); int i = 0; diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c index b2001c5b145..56841fe5f48 100644 --- a/drivers/serial/mcf.c +++ b/drivers/serial/mcf.c @@ -212,10 +212,18 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, { unsigned long flags; unsigned int baud, baudclk; +#if defined(CONFIG_M5272) + unsigned int baudfr; +#endif unsigned char mr1, mr2; baud = uart_get_baud_rate(port, termios, old, 0, 230400); +#if defined(CONFIG_M5272) + baudclk = (MCF_BUSCLK / baud) / 32; + baudfr = (((MCF_BUSCLK / baud) + 1) / 2) % 16; +#else baudclk = ((MCF_BUSCLK / baud) + 16) / 32; +#endif mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR; mr2 = 0; @@ -262,6 +270,9 @@ static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, writeb(mr2, port->membase + MCFUART_UMR); writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1); writeb((baudclk & 0xff), port->membase + MCFUART_UBG2); +#if defined(CONFIG_M5272) + writeb((baudfr & 0x0f), port->membase + MCFUART_UFPD); +#endif writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER, port->membase + MCFUART_UCSR); writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 38c600c0dbb..3599828b976 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -32,7 +32,9 @@ #elif defined(CONFIG_CPU_SUBTYPE_SH7720) || \ defined(CONFIG_CPU_SUBTYPE_SH7721) # define SCSCR_INIT(port) 0x0030 /* TIE=0,RIE=0,TE=1,RE=1 */ -#define SCIF_ORER 0x0200 /* overrun error bit */ +# define PORT_PTCR 0xA405011EUL +# define PORT_PVCR 0xA4050122UL +# define SCIF_ORER 0x0200 /* overrun error bit */ #elif defined(CONFIG_SH_RTS7751R2D) # define SCSPTR1 0xFFE0001C /* 8 bit SCIF */ # define SCSPTR2 0xFFE80020 /* 16 bit SCIF */ @@ -393,6 +395,7 @@ SCIx_FNS(SCSCR, 0x08, 16, 0x08, 16) SCIx_FNS(SCxTDR, 0x20, 8, 0x0c, 8) SCIx_FNS(SCxSR, 0x14, 16, 0x10, 16) SCIx_FNS(SCxRDR, 0x24, 8, 0x14, 8) +SCIx_FNS(SCSPTR, 0, 0, 0, 0) SCIF_FNS(SCTDSR, 0x0c, 8) SCIF_FNS(SCFER, 0x10, 16) SCIF_FNS(SCFCR, 0x18, 16) diff --git a/drivers/spi/Kconfig b/drivers/spi/Kconfig index 4a6fe01831a..83a185d5296 100644 --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig @@ -230,17 +230,6 @@ config SPI_XILINX # comment "SPI Protocol Masters" -config SPI_AT25 - tristate "SPI EEPROMs from most vendors" - depends on SYSFS - help - Enable this driver to get read/write support to most SPI EEPROMs, - after you configure the board init code to know about each eeprom - on your target board. - - This driver can also be built as a module. If so, the module - will be called at25. - config SPI_SPIDEV tristate "User mode SPI device driver support" depends on EXPERIMENTAL diff --git a/drivers/spi/Makefile b/drivers/spi/Makefile index 5e9f521b884..5d0451936d8 100644 --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile @@ -33,7 +33,6 @@ obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o # ... add above this line ... # SPI protocol drivers (device/link on bus) -obj-$(CONFIG_SPI_AT25) += at25.o obj-$(CONFIG_SPI_SPIDEV) += spidev.o obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o # ... add above this line ... diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile index 8b7c419b876..8bcde8cde55 100644 --- a/drivers/usb/Makefile +++ b/drivers/usb/Makefile @@ -13,6 +13,7 @@ obj-$(CONFIG_USB_EHCI_HCD) += host/ obj-$(CONFIG_USB_ISP116X_HCD) += host/ obj-$(CONFIG_USB_OHCI_HCD) += host/ obj-$(CONFIG_USB_UHCI_HCD) += host/ +obj-$(CONFIG_USB_FHCI_HCD) += host/ obj-$(CONFIG_USB_SL811_HCD) += host/ obj-$(CONFIG_USB_U132_HCD) += host/ obj-$(CONFIG_USB_R8A66597_HCD) += host/ diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 00b47ea24f8..97ba4a985ed 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1349,6 +1349,12 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0e8d, 0x0003), /* FIREFLY, MediaTek Inc; andrey.arapov@gmail.com */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0e8d, 0x3329), /* i-blue 747, Qstarz BT-Q1000, Holux M-241 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, + { USB_DEVICE(0x0e8d, 0x3329), /* MediaTek Inc GPS */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, { USB_DEVICE(0x0482, 0x0203), /* KYOCERA AH-K3001V */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, @@ -1370,6 +1376,9 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1321), /* Conexant USB MODEM CX93010 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */ + .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ + }, /* control interfaces with various AT-command sets */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, diff --git a/drivers/usb/class/usblp.c b/drivers/usb/class/usblp.c index b5775af3ba2..3f3ee135193 100644 --- a/drivers/usb/class/usblp.c +++ b/drivers/usb/class/usblp.c @@ -226,6 +226,7 @@ static const struct quirk_printer_struct quirk_printers[] = { { 0x0409, 0xf0be, USBLP_QUIRK_BIDIR }, /* NEC Picty920 (HP OEM) */ { 0x0409, 0xf1be, USBLP_QUIRK_BIDIR }, /* NEC Picty800 (HP OEM) */ { 0x0482, 0x0010, USBLP_QUIRK_BIDIR }, /* Kyocera Mita FS 820, by zut <kernel@zut.de> */ + { 0x04f9, 0x000d, USBLP_QUIRK_BIDIR }, /* Brother Industries, Ltd HL-1440 Laser Printer */ { 0x04b8, 0x0202, USBLP_QUIRK_BAD_CLASS }, /* Seiko Epson Receipt Printer M129C */ { 0, 0 } }; diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c index 26fece124e0..7513bb083c1 100644 --- a/drivers/usb/core/devio.c +++ b/drivers/usb/core/devio.c @@ -1700,7 +1700,7 @@ const struct file_operations usbdev_file_operations = { .release = usbdev_release, }; -void usb_fs_classdev_common_remove(struct usb_device *udev) +static void usbdev_remove(struct usb_device *udev) { struct dev_state *ps; struct siginfo sinfo; @@ -1742,10 +1742,15 @@ static void usb_classdev_remove(struct usb_device *dev) { if (dev->usb_classdev) device_unregister(dev->usb_classdev); - usb_fs_classdev_common_remove(dev); } -static int usb_classdev_notify(struct notifier_block *self, +#else +#define usb_classdev_add(dev) 0 +#define usb_classdev_remove(dev) do {} while (0) + +#endif + +static int usbdev_notify(struct notifier_block *self, unsigned long action, void *dev) { switch (action) { @@ -1755,15 +1760,15 @@ static int usb_classdev_notify(struct notifier_block *self, break; case USB_DEVICE_REMOVE: usb_classdev_remove(dev); + usbdev_remove(dev); break; } return NOTIFY_OK; } static struct notifier_block usbdev_nb = { - .notifier_call = usb_classdev_notify, + .notifier_call = usbdev_notify, }; -#endif static struct cdev usb_device_cdev; @@ -1798,9 +1803,8 @@ int __init usb_devio_init(void) * to /sys/dev */ usb_classdev_class->dev_kobj = NULL; - - usb_register_notify(&usbdev_nb); #endif + usb_register_notify(&usbdev_nb); out: return retval; @@ -1811,8 +1815,8 @@ error_cdev: void usb_devio_cleanup(void) { -#ifdef CONFIG_USB_DEVICE_CLASS usb_unregister_notify(&usbdev_nb); +#ifdef CONFIG_USB_DEVICE_CLASS class_destroy(usb_classdev_class); #endif cdev_del(&usb_device_cdev); diff --git a/drivers/usb/core/driver.c b/drivers/usb/core/driver.c index 98760553bc9..d0a21a5f820 100644 --- a/drivers/usb/core/driver.c +++ b/drivers/usb/core/driver.c @@ -284,7 +284,7 @@ static int usb_unbind_interface(struct device *dev) * supports "soft" unbinding. */ if (!driver->soft_unbind) - usb_disable_interface(udev, intf); + usb_disable_interface(udev, intf, false); driver->disconnect(intf); usb_cancel_queued_reset(intf); diff --git a/drivers/usb/core/hcd-pci.c b/drivers/usb/core/hcd-pci.c index 507741ed448..c54fc40458b 100644 --- a/drivers/usb/core/hcd-pci.c +++ b/drivers/usb/core/hcd-pci.c @@ -128,7 +128,6 @@ int usb_hcd_pci_probe(struct pci_dev *dev, const struct pci_device_id *id) } pci_set_master(dev); - device_set_wakeup_enable(&dev->dev, 1); retval = usb_add_hcd(hcd, dev->irq, IRQF_DISABLED | IRQF_SHARED); if (retval != 0) @@ -201,6 +200,7 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) struct usb_hcd *hcd = pci_get_drvdata(dev); int retval = 0; int wake, w; + int has_pci_pm; /* Root hub suspend should have stopped all downstream traffic, * and all bus master traffic. And done so for both the interface @@ -230,6 +230,15 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) synchronize_irq(dev->irq); + /* Downstream ports from this root hub should already be quiesced, so + * there will be no DMA activity. Now we can shut down the upstream + * link (except maybe for PME# resume signaling) and enter some PCI + * low power state, if the hardware allows. + */ + pci_disable_device(dev); + + pci_save_state(dev); + /* Don't fail on error to enable wakeup. We rely on pci code * to reject requests the hardware can't implement, rather * than coding the same thing. @@ -241,35 +250,6 @@ int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t message) wake = w; dev_dbg(&dev->dev, "wakeup: %d\n", wake); - /* Downstream ports from this root hub should already be quiesced, so - * there will be no DMA activity. Now we can shut down the upstream - * link (except maybe for PME# resume signaling) and enter some PCI - * low power state, if the hardware allows. - */ - pci_disable_device(dev); - done: - return retval; -} -EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend); - -/** - * usb_hcd_pci_suspend_late - suspend a PCI-based HCD after IRQs are disabled - * @dev: USB Host Controller being suspended - * @message: Power Management message describing this state transition - * - * Store this function in the HCD's struct pci_driver as .suspend_late. - */ -int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message) -{ - int retval = 0; - int has_pci_pm; - - /* We might already be suspended (runtime PM -- not yet written) */ - if (dev->current_state != PCI_D0) - goto done; - - pci_save_state(dev); - /* Don't change state if we don't need to */ if (message.event == PM_EVENT_FREEZE || message.event == PM_EVENT_PRETHAW) { @@ -315,7 +295,7 @@ int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t message) done: return retval; } -EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late); +EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend); /** * usb_hcd_pci_resume_early - resume a PCI-based HCD before IRQs are enabled @@ -325,65 +305,8 @@ EXPORT_SYMBOL_GPL(usb_hcd_pci_suspend_late); */ int usb_hcd_pci_resume_early(struct pci_dev *dev) { - int retval = 0; - pci_power_t state = dev->current_state; - -#ifdef CONFIG_PPC_PMAC - /* Reenable ASIC clocks for USB */ - if (machine_is(powermac)) { - struct device_node *of_node; - - of_node = pci_device_to_OF_node(dev); - if (of_node) - pmac_call_feature(PMAC_FTR_USB_ENABLE, - of_node, 0, 1); - } -#endif - - /* NOTE: chip docs cover clean "real suspend" cases (what Linux - * calls "standby", "suspend to RAM", and so on). There are also - * dirty cases when swsusp fakes a suspend in "shutdown" mode. - */ - if (state != PCI_D0) { -#ifdef DEBUG - int pci_pm; - u16 pmcr; - - pci_pm = pci_find_capability(dev, PCI_CAP_ID_PM); - pci_read_config_word(dev, pci_pm + PCI_PM_CTRL, &pmcr); - pmcr &= PCI_PM_CTRL_STATE_MASK; - if (pmcr) { - /* Clean case: power to USB and to HC registers was - * maintained; remote wakeup is easy. - */ - dev_dbg(&dev->dev, "resume from PCI D%d\n", pmcr); - } else { - /* Clean: HC lost Vcc power, D0 uninitialized - * + Vaux may have preserved port and transceiver - * state ... for remote wakeup from D3cold - * + or not; HCD must reinit + re-enumerate - * - * Dirty: D0 semi-initialized cases with swsusp - * + after BIOS init - * + after Linux init (HCD statically linked) - */ - dev_dbg(&dev->dev, "resume from previous PCI D%d\n", - state); - } -#endif - - retval = pci_set_power_state(dev, PCI_D0); - } else { - /* Same basic cases: clean (powered/not), dirty */ - dev_dbg(&dev->dev, "PCI legacy resume\n"); - } - - if (retval < 0) - dev_err(&dev->dev, "can't resume: %d\n", retval); - else - pci_restore_state(dev); - - return retval; + pci_restore_state(dev); + return 0; } EXPORT_SYMBOL_GPL(usb_hcd_pci_resume_early); @@ -398,6 +321,18 @@ int usb_hcd_pci_resume(struct pci_dev *dev) struct usb_hcd *hcd; int retval; +#ifdef CONFIG_PPC_PMAC + /* Reenable ASIC clocks for USB */ + if (machine_is(powermac)) { + struct device_node *of_node; + + of_node = pci_device_to_OF_node(dev); + if (of_node) + pmac_call_feature(PMAC_FTR_USB_ENABLE, + of_node, 0, 1); + } +#endif + hcd = pci_get_drvdata(dev); if (hcd->state != HC_STATE_SUSPENDED) { dev_dbg(hcd->self.controller, @@ -405,6 +340,8 @@ int usb_hcd_pci_resume(struct pci_dev *dev) return 0; } + pci_enable_wake(dev, PCI_D0, false); + retval = pci_enable_device(dev); if (retval < 0) { dev_err(&dev->dev, "can't re-enable after resume, %d!\n", diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h index 572d2cf46e8..5b94a56bec2 100644 --- a/drivers/usb/core/hcd.h +++ b/drivers/usb/core/hcd.h @@ -257,7 +257,6 @@ extern void usb_hcd_pci_remove(struct pci_dev *dev); #ifdef CONFIG_PM extern int usb_hcd_pci_suspend(struct pci_dev *dev, pm_message_t msg); -extern int usb_hcd_pci_suspend_late(struct pci_dev *dev, pm_message_t msg); extern int usb_hcd_pci_resume_early(struct pci_dev *dev); extern int usb_hcd_pci_resume(struct pci_dev *dev); #endif /* CONFIG_PM */ diff --git a/drivers/usb/core/hub.c b/drivers/usb/core/hub.c index 94d5ee263c2..cd50d86029e 100644 --- a/drivers/usb/core/hub.c +++ b/drivers/usb/core/hub.c @@ -2382,8 +2382,8 @@ static int hub_port_debounce(struct usb_hub *hub, int port1) void usb_ep0_reinit(struct usb_device *udev) { - usb_disable_endpoint(udev, 0 + USB_DIR_IN); - usb_disable_endpoint(udev, 0 + USB_DIR_OUT); + usb_disable_endpoint(udev, 0 + USB_DIR_IN, true); + usb_disable_endpoint(udev, 0 + USB_DIR_OUT, true); usb_enable_endpoint(udev, &udev->ep0, true); } EXPORT_SYMBOL_GPL(usb_ep0_reinit); diff --git a/drivers/usb/core/inode.c b/drivers/usb/core/inode.c index 2a129cb7bb5..dff5760a37f 100644 --- a/drivers/usb/core/inode.c +++ b/drivers/usb/core/inode.c @@ -717,7 +717,6 @@ static void usbfs_remove_device(struct usb_device *dev) fs_remove_file (dev->usbfs_dentry); dev->usbfs_dentry = NULL; } - usb_fs_classdev_common_remove(dev); } static int usbfs_notify(struct notifier_block *self, unsigned long action, void *dev) diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index de51667dd64..31fb204f44c 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -1039,14 +1039,15 @@ static void remove_intf_ep_devs(struct usb_interface *intf) * @dev: the device whose endpoint is being disabled * @epaddr: the endpoint's address. Endpoint number for output, * endpoint number + USB_DIR_IN for input + * @reset_hardware: flag to erase any endpoint state stored in the + * controller hardware * - * Deallocates hcd/hardware state for this endpoint ... and nukes all - * pending urbs. - * - * If the HCD hasn't registered a disable() function, this sets the - * endpoint's maxpacket size to 0 to prevent further submissions. + * Disables the endpoint for URB submission and nukes all pending URBs. + * If @reset_hardware is set then also deallocates hcd/hardware state + * for the endpoint. */ -void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr) +void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr, + bool reset_hardware) { unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK; struct usb_host_endpoint *ep; @@ -1056,15 +1057,18 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr) if (usb_endpoint_out(epaddr)) { ep = dev->ep_out[epnum]; - dev->ep_out[epnum] = NULL; + if (reset_hardware) + dev->ep_out[epnum] = NULL; } else { ep = dev->ep_in[epnum]; - dev->ep_in[epnum] = NULL; + if (reset_hardware) + dev->ep_in[epnum] = NULL; } if (ep) { ep->enabled = 0; usb_hcd_flush_endpoint(dev, ep); - usb_hcd_disable_endpoint(dev, ep); + if (reset_hardware) + usb_hcd_disable_endpoint(dev, ep); } } @@ -1072,17 +1076,21 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr) * usb_disable_interface -- Disable all endpoints for an interface * @dev: the device whose interface is being disabled * @intf: pointer to the interface descriptor + * @reset_hardware: flag to erase any endpoint state stored in the + * controller hardware * * Disables all the endpoints for the interface's current altsetting. */ -void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf) +void usb_disable_interface(struct usb_device *dev, struct usb_interface *intf, + bool reset_hardware) { struct usb_host_interface *alt = intf->cur_altsetting; int i; for (i = 0; i < alt->desc.bNumEndpoints; ++i) { usb_disable_endpoint(dev, - alt->endpoint[i].desc.bEndpointAddress); + alt->endpoint[i].desc.bEndpointAddress, + reset_hardware); } } @@ -1103,8 +1111,8 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0) dev_dbg(&dev->dev, "%s nuking %s URBs\n", __func__, skip_ep0 ? "non-ep0" : "all"); for (i = skip_ep0; i < 16; ++i) { - usb_disable_endpoint(dev, i); - usb_disable_endpoint(dev, i + USB_DIR_IN); + usb_disable_endpoint(dev, i, true); + usb_disable_endpoint(dev, i + USB_DIR_IN, true); } dev->toggle[0] = dev->toggle[1] = 0; @@ -1274,7 +1282,7 @@ int usb_set_interface(struct usb_device *dev, int interface, int alternate) remove_intf_ep_devs(iface); usb_remove_sysfs_intf_files(iface); } - usb_disable_interface(dev, iface); + usb_disable_interface(dev, iface, true); iface->cur_altsetting = alt; @@ -1353,8 +1361,8 @@ int usb_reset_configuration(struct usb_device *dev) */ for (i = 1; i < 16; ++i) { - usb_disable_endpoint(dev, i); - usb_disable_endpoint(dev, i + USB_DIR_IN); + usb_disable_endpoint(dev, i, true); + usb_disable_endpoint(dev, i + USB_DIR_IN, true); } config = dev->actconfig; diff --git a/drivers/usb/core/usb.h b/drivers/usb/core/usb.h index 386177867a8..79d8a9ea559 100644 --- a/drivers/usb/core/usb.h +++ b/drivers/usb/core/usb.h @@ -15,9 +15,10 @@ extern void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep, bool reset_toggle); extern void usb_enable_interface(struct usb_device *dev, struct usb_interface *intf, bool reset_toggles); -extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr); +extern void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr, + bool reset_hardware); extern void usb_disable_interface(struct usb_device *dev, - struct usb_interface *intf); + struct usb_interface *intf, bool reset_hardware); extern void usb_release_interface_cache(struct kref *ref); extern void usb_disable_device(struct usb_device *dev, int skip_ep0); extern int usb_deauthorize_device(struct usb_device *); @@ -151,7 +152,6 @@ extern struct usb_driver usbfs_driver; extern const struct file_operations usbfs_devices_fops; extern const struct file_operations usbdev_file_operations; extern void usbfs_conn_disc_event(void); -extern void usb_fs_classdev_common_remove(struct usb_device *udev); extern int usb_devio_init(void); extern void usb_devio_cleanup(void); diff --git a/drivers/usb/gadget/composite.c b/drivers/usb/gadget/composite.c index f2da0269e1b..5d11c291f1a 100644 --- a/drivers/usb/gadget/composite.c +++ b/drivers/usb/gadget/composite.c @@ -683,6 +683,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) struct usb_request *req = cdev->req; int value = -EOPNOTSUPP; u16 w_index = le16_to_cpu(ctrl->wIndex); + u8 intf = w_index & 0xFF; u16 w_value = le16_to_cpu(ctrl->wValue); u16 w_length = le16_to_cpu(ctrl->wLength); struct usb_function *f = NULL; @@ -769,10 +770,10 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) goto unknown; if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES) break; - f = cdev->config->interface[w_index]; + f = cdev->config->interface[intf]; if (!f) break; - if (w_value && !f->get_alt) + if (w_value && !f->set_alt) break; value = f->set_alt(f, w_index, w_value); break; @@ -781,7 +782,7 @@ composite_setup(struct usb_gadget *gadget, const struct usb_ctrlrequest *ctrl) goto unknown; if (!cdev->config || w_index >= MAX_CONFIG_INTERFACES) break; - f = cdev->config->interface[w_index]; + f = cdev->config->interface[intf]; if (!f) break; /* lots of interfaces only need altsetting zero... */ @@ -808,7 +809,7 @@ unknown: */ if ((ctrl->bRequestType & USB_RECIP_MASK) == USB_RECIP_INTERFACE) { - f = cdev->config->interface[w_index]; + f = cdev->config->interface[intf]; if (f && f->setup) value = f->setup(f, ctrl); else diff --git a/drivers/usb/gadget/imx_udc.c b/drivers/usb/gadget/imx_udc.c index cde8fdf15d5..77c5d0a8a06 100644 --- a/drivers/usb/gadget/imx_udc.c +++ b/drivers/usb/gadget/imx_udc.c @@ -297,7 +297,7 @@ void imx_ep_stall(struct imx_ep_struct *imx_ep) for (i = 0; i < 100; i ++) { temp = __raw_readl(imx_usb->base + USB_EP_STAT(EP_NO(imx_ep))); - if (!temp & EPSTAT_STALL) + if (!(temp & EPSTAT_STALL)) break; udelay(20); } diff --git a/drivers/usb/host/Kconfig b/drivers/usb/host/Kconfig index 2b476b6b3d4..2c63bfb1f8d 100644 --- a/drivers/usb/host/Kconfig +++ b/drivers/usb/host/Kconfig @@ -140,6 +140,7 @@ config USB_OHCI_HCD tristate "OHCI HCD support" depends on USB && USB_ARCH_HAS_OHCI select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 + select USB_OTG_UTILS if ARCH_OMAP ---help--- The Open Host Controller Interface (OHCI) is a standard for accessing USB 1.1 host controller hardware. It does more in hardware than Intel's @@ -238,6 +239,23 @@ config USB_UHCI_HCD To compile this driver as a module, choose M here: the module will be called uhci-hcd. +config USB_FHCI_HCD + tristate "Freescale QE USB Host Controller support" + depends on USB && OF_GPIO && QE_GPIO && QUICC_ENGINE + select FSL_GTM + select QE_USB + help + This driver enables support for Freescale QE USB Host Controller + (as found on MPC8360 and MPC8323 processors), the driver supports + Full and Low Speed USB. + +config FHCI_DEBUG + bool "Freescale QE USB Host Controller debug support" + depends on USB_FHCI_HCD && DEBUG_FS + help + Say "y" to see some FHCI debug information and statistics + throught debugfs. + config USB_U132_HCD tristate "Elan U132 Adapter Host Controller" depends on USB && USB_FTDI_ELAN diff --git a/drivers/usb/host/Makefile b/drivers/usb/host/Makefile index e5f3f20787e..f163571e33d 100644 --- a/drivers/usb/host/Makefile +++ b/drivers/usb/host/Makefile @@ -7,6 +7,11 @@ ifeq ($(CONFIG_USB_DEBUG),y) endif isp1760-objs := isp1760-hcd.o isp1760-if.o +fhci-objs := fhci-hcd.o fhci-hub.o fhci-q.o fhci-mem.o \ + fhci-tds.o fhci-sched.o +ifeq ($(CONFIG_FHCI_DEBUG),y) +fhci-objs += fhci-dbg.o +endif obj-$(CONFIG_USB_WHCI_HCD) += whci/ @@ -17,6 +22,7 @@ obj-$(CONFIG_USB_OXU210HP_HCD) += oxu210hp-hcd.o obj-$(CONFIG_USB_ISP116X_HCD) += isp116x-hcd.o obj-$(CONFIG_USB_OHCI_HCD) += ohci-hcd.o obj-$(CONFIG_USB_UHCI_HCD) += uhci-hcd.o +obj-$(CONFIG_USB_FHCI_HCD) += fhci.o obj-$(CONFIG_USB_SL811_HCD) += sl811-hcd.o obj-$(CONFIG_USB_SL811_CS) += sl811_cs.o obj-$(CONFIG_USB_U132_HCD) += u132-hcd.o diff --git a/drivers/usb/host/ehci-pci.c b/drivers/usb/host/ehci-pci.c index bdc6e86e1f8..bb21fb0a496 100644 --- a/drivers/usb/host/ehci-pci.c +++ b/drivers/usb/host/ehci-pci.c @@ -230,7 +230,7 @@ static int ehci_pci_setup(struct usb_hcd *hcd) pci_read_config_word(pdev, 0x62, &port_wake); if (port_wake & 0x0001) { dev_warn(&pdev->dev, "Enabling legacy PCI PM\n"); - device_init_wakeup(&pdev->dev, 1); + device_set_wakeup_capable(&pdev->dev, 1); } } @@ -432,7 +432,6 @@ static struct pci_driver ehci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .suspend_late = usb_hcd_pci_suspend_late, .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif diff --git a/drivers/usb/host/fhci-dbg.c b/drivers/usb/host/fhci-dbg.c new file mode 100644 index 00000000000..34e14edf390 --- /dev/null +++ b/drivers/usb/host/fhci-dbg.c @@ -0,0 +1,139 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/debugfs.h> +#include <linux/seq_file.h> +#include <linux/usb.h> +#include "../core/hcd.h" +#include "fhci.h" + +void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er) +{ + int i; + + if (usb_er == -1) { + fhci->usb_irq_stat[12]++; + return; + } + + for (i = 0; i < 12; ++i) { + if (usb_er & (1 << i)) + fhci->usb_irq_stat[i]++; + } +} + +static int fhci_dfs_regs_show(struct seq_file *s, void *v) +{ + struct fhci_hcd *fhci = s->private; + struct fhci_regs __iomem *regs = fhci->regs; + + seq_printf(s, + "mode: 0x%x\n" "addr: 0x%x\n" + "command: 0x%x\n" "ep0: 0x%x\n" + "event: 0x%x\n" "mask: 0x%x\n" + "status: 0x%x\n" "SOF timer: %d\n" + "frame number: %d\n" + "lines status: 0x%x\n", + in_8(®s->usb_mod), in_8(®s->usb_addr), + in_8(®s->usb_comm), in_be16(®s->usb_ep[0]), + in_be16(®s->usb_event), in_be16(®s->usb_mask), + in_8(®s->usb_status), in_be16(®s->usb_sof_tmr), + in_be16(®s->usb_frame_num), + fhci_ioports_check_bus_state(fhci)); + + return 0; +} + +static int fhci_dfs_irq_stat_show(struct seq_file *s, void *v) +{ + struct fhci_hcd *fhci = s->private; + int *usb_irq_stat = fhci->usb_irq_stat; + + seq_printf(s, + "RXB: %d\n" "TXB: %d\n" "BSY: %d\n" + "SOF: %d\n" "TXE0: %d\n" "TXE1: %d\n" + "TXE2: %d\n" "TXE3: %d\n" "IDLE: %d\n" + "RESET: %d\n" "SFT: %d\n" "MSF: %d\n" + "IDLE_ONLY: %d\n", + usb_irq_stat[0], usb_irq_stat[1], usb_irq_stat[2], + usb_irq_stat[3], usb_irq_stat[4], usb_irq_stat[5], + usb_irq_stat[6], usb_irq_stat[7], usb_irq_stat[8], + usb_irq_stat[9], usb_irq_stat[10], usb_irq_stat[11], + usb_irq_stat[12]); + + return 0; +} + +static int fhci_dfs_regs_open(struct inode *inode, struct file *file) +{ + return single_open(file, fhci_dfs_regs_show, inode->i_private); +} + +static int fhci_dfs_irq_stat_open(struct inode *inode, struct file *file) +{ + return single_open(file, fhci_dfs_irq_stat_show, inode->i_private); +} + +static const struct file_operations fhci_dfs_regs_fops = { + .open = fhci_dfs_regs_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +static const struct file_operations fhci_dfs_irq_stat_fops = { + .open = fhci_dfs_irq_stat_open, + .read = seq_read, + .llseek = seq_lseek, + .release = single_release, +}; + +void fhci_dfs_create(struct fhci_hcd *fhci) +{ + struct device *dev = fhci_to_hcd(fhci)->self.controller; + + fhci->dfs_root = debugfs_create_dir(dev->bus_id, NULL); + if (!fhci->dfs_root) { + WARN_ON(1); + return; + } + + fhci->dfs_regs = debugfs_create_file("regs", S_IFREG | S_IRUGO, + fhci->dfs_root, fhci, &fhci_dfs_regs_fops); + + fhci->dfs_irq_stat = debugfs_create_file("irq_stat", + S_IFREG | S_IRUGO, fhci->dfs_root, fhci, + &fhci_dfs_irq_stat_fops); + + WARN_ON(!fhci->dfs_regs || !fhci->dfs_irq_stat); +} + +void fhci_dfs_destroy(struct fhci_hcd *fhci) +{ + if (!fhci->dfs_root) + return; + + if (fhci->dfs_irq_stat) + debugfs_remove(fhci->dfs_irq_stat); + + if (fhci->dfs_regs) + debugfs_remove(fhci->dfs_regs); + + debugfs_remove(fhci->dfs_root); +} diff --git a/drivers/usb/host/fhci-hcd.c b/drivers/usb/host/fhci-hcd.c new file mode 100644 index 00000000000..ba622cc8a9b --- /dev/null +++ b/drivers/usb/host/fhci-hcd.c @@ -0,0 +1,836 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/module.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/kernel.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/usb.h> +#include <linux/of_platform.h> +#include <linux/of_gpio.h> +#include <asm/qe.h> +#include <asm/fsl_gtm.h> +#include "../core/hcd.h" +#include "fhci.h" + +void fhci_start_sof_timer(struct fhci_hcd *fhci) +{ + fhci_dbg(fhci, "-> %s\n", __func__); + + /* clear frame_n */ + out_be16(&fhci->pram->frame_num, 0); + + out_be16(&fhci->regs->usb_sof_tmr, 0); + setbits8(&fhci->regs->usb_mod, USB_MODE_SFTE); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +void fhci_stop_sof_timer(struct fhci_hcd *fhci) +{ + fhci_dbg(fhci, "-> %s\n", __func__); + + clrbits8(&fhci->regs->usb_mod, USB_MODE_SFTE); + gtm_stop_timer16(fhci->timer); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +u16 fhci_get_sof_timer_count(struct fhci_usb *usb) +{ + return be16_to_cpu(in_be16(&usb->fhci->regs->usb_sof_tmr) / 12); +} + +/* initialize the endpoint zero */ +static u32 endpoint_zero_init(struct fhci_usb *usb, + enum fhci_mem_alloc data_mem, + u32 ring_len) +{ + u32 rc; + + rc = fhci_create_ep(usb, data_mem, ring_len); + if (rc) + return rc; + + /* inilialize endpoint registers */ + fhci_init_ep_registers(usb, usb->ep0, data_mem); + + return 0; +} + +/* enable the USB interrupts */ +void fhci_usb_enable_interrupt(struct fhci_usb *usb) +{ + struct fhci_hcd *fhci = usb->fhci; + + if (usb->intr_nesting_cnt == 1) { + /* initialize the USB interrupt */ + enable_irq(fhci_to_hcd(fhci)->irq); + + /* initialize the event register and mask register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + + /* enable the timer interrupts */ + enable_irq(fhci->timer->irq); + } else if (usb->intr_nesting_cnt > 1) + fhci_info(fhci, "unbalanced USB interrupts nesting\n"); + usb->intr_nesting_cnt--; +} + +/* diable the usb interrupt */ +void fhci_usb_disable_interrupt(struct fhci_usb *usb) +{ + struct fhci_hcd *fhci = usb->fhci; + + if (usb->intr_nesting_cnt == 0) { + /* diable the timer interrupt */ + disable_irq_nosync(fhci->timer->irq); + + /* disable the usb interrupt */ + disable_irq_nosync(fhci_to_hcd(fhci)->irq); + out_be16(&usb->fhci->regs->usb_mask, 0); + } + usb->intr_nesting_cnt++; +} + +/* enable the USB controller */ +static u32 fhci_usb_enable(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + out_be16(&usb->fhci->regs->usb_event, 0xffff); + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + setbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN); + + mdelay(100); + + return 0; +} + +/* disable the USB controller */ +static u32 fhci_usb_disable(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + fhci_usb_disable_interrupt(usb); + fhci_port_disable(fhci); + + /* disable the usb controller */ + if (usb->port_status == FHCI_PORT_FULL || + usb->port_status == FHCI_PORT_LOW) + fhci_device_disconnected_interrupt(fhci); + + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN); + + return 0; +} + +/* check the bus state by polling the QE bit on the IO ports */ +int fhci_ioports_check_bus_state(struct fhci_hcd *fhci) +{ + u8 bits = 0; + + /* check USBOE,if transmitting,exit */ + if (!gpio_get_value(fhci->gpios[GPIO_USBOE])) + return -1; + + /* check USBRP */ + if (gpio_get_value(fhci->gpios[GPIO_USBRP])) + bits |= 0x2; + + /* check USBRN */ + if (gpio_get_value(fhci->gpios[GPIO_USBRN])) + bits |= 0x1; + + return bits; +} + +static void fhci_mem_free(struct fhci_hcd *fhci) +{ + struct ed *ed; + struct ed *next_ed; + struct td *td; + struct td *next_td; + + list_for_each_entry_safe(ed, next_ed, &fhci->empty_eds, node) { + list_del(&ed->node); + kfree(ed); + } + + list_for_each_entry_safe(td, next_td, &fhci->empty_tds, node) { + list_del(&td->node); + kfree(td); + } + + kfree(fhci->vroot_hub); + fhci->vroot_hub = NULL; + + kfree(fhci->hc_list); + fhci->hc_list = NULL; +} + +static int fhci_mem_init(struct fhci_hcd *fhci) +{ + int i; + + fhci->hc_list = kzalloc(sizeof(*fhci->hc_list), GFP_KERNEL); + if (!fhci->hc_list) + goto err; + + INIT_LIST_HEAD(&fhci->hc_list->ctrl_list); + INIT_LIST_HEAD(&fhci->hc_list->bulk_list); + INIT_LIST_HEAD(&fhci->hc_list->iso_list); + INIT_LIST_HEAD(&fhci->hc_list->intr_list); + INIT_LIST_HEAD(&fhci->hc_list->done_list); + + fhci->vroot_hub = kzalloc(sizeof(*fhci->vroot_hub), GFP_KERNEL); + if (!fhci->vroot_hub) + goto err; + + INIT_LIST_HEAD(&fhci->empty_eds); + INIT_LIST_HEAD(&fhci->empty_tds); + + /* initialize work queue to handle done list */ + fhci_tasklet.data = (unsigned long)fhci; + fhci->process_done_task = &fhci_tasklet; + + for (i = 0; i < MAX_TDS; i++) { + struct td *td; + + td = kmalloc(sizeof(*td), GFP_KERNEL); + if (!td) + goto err; + fhci_recycle_empty_td(fhci, td); + } + for (i = 0; i < MAX_EDS; i++) { + struct ed *ed; + + ed = kmalloc(sizeof(*ed), GFP_KERNEL); + if (!ed) + goto err; + fhci_recycle_empty_ed(fhci, ed); + } + + fhci->active_urbs = 0; + return 0; +err: + fhci_mem_free(fhci); + return -ENOMEM; +} + +/* destroy the fhci_usb structure */ +static void fhci_usb_free(void *lld) +{ + struct fhci_usb *usb = lld; + struct fhci_hcd *fhci = usb->fhci; + + if (usb) { + fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); + fhci_ep0_free(usb); + kfree(usb->actual_frame); + kfree(usb); + } +} + +/* initialize the USB */ +static int fhci_usb_init(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + memset_io(usb->fhci->pram, 0, FHCI_PRAM_SIZE); + + usb->port_status = FHCI_PORT_DISABLED; + usb->max_frame_usage = FRAME_TIME_USAGE; + usb->sw_transaction_time = SW_FIX_TIME_BETWEEN_TRANSACTION; + + usb->actual_frame = kzalloc(sizeof(*usb->actual_frame), GFP_KERNEL); + if (!usb->actual_frame) { + fhci_usb_free(usb); + return -ENOMEM; + } + + INIT_LIST_HEAD(&usb->actual_frame->tds_list); + + /* initializing registers on chip, clear frame number */ + out_be16(&fhci->pram->frame_num, 0); + + /* clear rx state */ + out_be32(&fhci->pram->rx_state, 0); + + /* set mask register */ + usb->saved_msk = (USB_E_TXB_MASK | + USB_E_TXE1_MASK | + USB_E_IDLE_MASK | + USB_E_RESET_MASK | USB_E_SFT_MASK | USB_E_MSF_MASK); + + out_8(&usb->fhci->regs->usb_mod, USB_MODE_HOST | USB_MODE_EN); + + /* clearing the mask register */ + out_be16(&usb->fhci->regs->usb_mask, 0); + + /* initialing the event register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + + if (endpoint_zero_init(usb, DEFAULT_DATA_MEM, DEFAULT_RING_LEN) != 0) { + fhci_usb_free(usb); + return -EINVAL; + } + + return 0; +} + +/* initialize the fhci_usb struct and the corresponding data staruct */ +static struct fhci_usb *fhci_create_lld(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb; + + /* allocate memory for SCC data structure */ + usb = kzalloc(sizeof(*usb), GFP_KERNEL); + if (!usb) { + fhci_err(fhci, "no memory for SCC data struct\n"); + return NULL; + } + + usb->fhci = fhci; + usb->hc_list = fhci->hc_list; + usb->vroot_hub = fhci->vroot_hub; + + usb->transfer_confirm = fhci_transfer_confirm_callback; + + return usb; +} + +static int fhci_start(struct usb_hcd *hcd) +{ + int ret; + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + + ret = fhci_mem_init(fhci); + if (ret) { + fhci_err(fhci, "failed to allocate memory\n"); + goto err; + } + + fhci->usb_lld = fhci_create_lld(fhci); + if (!fhci->usb_lld) { + fhci_err(fhci, "low level driver config failed\n"); + ret = -ENOMEM; + goto err; + } + + ret = fhci_usb_init(fhci); + if (ret) { + fhci_err(fhci, "low level driver initialize failed\n"); + goto err; + } + + spin_lock_init(&fhci->lock); + + /* connect the virtual root hub */ + fhci->vroot_hub->dev_num = 1; /* this field may be needed to fix */ + fhci->vroot_hub->hub.wHubStatus = 0; + fhci->vroot_hub->hub.wHubChange = 0; + fhci->vroot_hub->port.wPortStatus = 0; + fhci->vroot_hub->port.wPortChange = 0; + + hcd->state = HC_STATE_RUNNING; + + /* + * From here on, khubd concurrently accesses the root + * hub; drivers will be talking to enumerated devices. + * (On restart paths, khubd already knows about the root + * hub and could find work as soon as we wrote FLAG_CF.) + * + * Before this point the HC was idle/ready. After, khubd + * and device drivers may start it running. + */ + fhci_usb_enable(fhci); + return 0; +err: + fhci_mem_free(fhci); + return ret; +} + +static void fhci_stop(struct usb_hcd *hcd) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + + fhci_usb_disable_interrupt(fhci->usb_lld); + fhci_usb_disable(fhci); + + fhci_usb_free(fhci->usb_lld); + fhci->usb_lld = NULL; + fhci_mem_free(fhci); +} + +static int fhci_urb_enqueue(struct usb_hcd *hcd, struct urb *urb, + gfp_t mem_flags) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + u32 pipe = urb->pipe; + int ret; + int i; + int size = 0; + struct urb_priv *urb_priv; + unsigned long flags; + + switch (usb_pipetype(pipe)) { + case PIPE_CONTROL: + /* 1 td fro setup,1 for ack */ + size = 2; + case PIPE_BULK: + /* one td for every 4096 bytes(can be upto 8k) */ + size += urb->transfer_buffer_length / 4096; + /* ...add for any remaining bytes... */ + if ((urb->transfer_buffer_length % 4096) != 0) + size++; + /* ..and maybe a zero length packet to wrap it up */ + if (size == 0) + size++; + else if ((urb->transfer_flags & URB_ZERO_PACKET) != 0 + && (urb->transfer_buffer_length + % usb_maxpacket(urb->dev, pipe, + usb_pipeout(pipe))) != 0) + size++; + break; + case PIPE_ISOCHRONOUS: + size = urb->number_of_packets; + if (size <= 0) + return -EINVAL; + for (i = 0; i < urb->number_of_packets; i++) { + urb->iso_frame_desc[i].actual_length = 0; + urb->iso_frame_desc[i].status = (u32) (-EXDEV); + } + break; + case PIPE_INTERRUPT: + size = 1; + } + + /* allocate the private part of the URB */ + urb_priv = kzalloc(sizeof(*urb_priv), mem_flags); + if (!urb_priv) + return -ENOMEM; + + /* allocate the private part of the URB */ + urb_priv->tds = kzalloc(size * sizeof(struct td), mem_flags); + if (!urb_priv->tds) { + kfree(urb_priv); + return -ENOMEM; + } + + spin_lock_irqsave(&fhci->lock, flags); + + ret = usb_hcd_link_urb_to_ep(hcd, urb); + if (ret) + goto err; + + /* fill the private part of the URB */ + urb_priv->num_of_tds = size; + + urb->status = -EINPROGRESS; + urb->actual_length = 0; + urb->error_count = 0; + urb->hcpriv = urb_priv; + + fhci_queue_urb(fhci, urb); +err: + if (ret) { + kfree(urb_priv->tds); + kfree(urb_priv); + } + spin_unlock_irqrestore(&fhci->lock, flags); + return ret; +} + +/* dequeue FHCI URB */ +static int fhci_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + struct fhci_usb *usb = fhci->usb_lld; + int ret = -EINVAL; + unsigned long flags; + + if (!urb || !urb->dev || !urb->dev->bus) + goto out; + + spin_lock_irqsave(&fhci->lock, flags); + + ret = usb_hcd_check_unlink_urb(hcd, urb, status); + if (ret) + goto out2; + + if (usb->port_status != FHCI_PORT_DISABLED) { + struct urb_priv *urb_priv; + + /* + * flag the urb's data for deletion in some upcoming + * SF interrupt's delete list processing + */ + urb_priv = urb->hcpriv; + + if (!urb_priv || (urb_priv->state == URB_DEL)) + goto out2; + + urb_priv->state = URB_DEL; + + /* already pending? */ + urb_priv->ed->state = FHCI_ED_URB_DEL; + } else { + fhci_urb_complete_free(fhci, urb); + } + +out2: + spin_unlock_irqrestore(&fhci->lock, flags); +out: + return ret; +} + +static void fhci_endpoint_disable(struct usb_hcd *hcd, + struct usb_host_endpoint *ep) +{ + struct fhci_hcd *fhci; + struct ed *ed; + unsigned long flags; + + fhci = hcd_to_fhci(hcd); + spin_lock_irqsave(&fhci->lock, flags); + ed = ep->hcpriv; + if (ed) { + while (ed->td_head != NULL) { + struct td *td = fhci_remove_td_from_ed(ed); + fhci_urb_complete_free(fhci, td->urb); + } + fhci_recycle_empty_ed(fhci, ed); + ep->hcpriv = NULL; + } + spin_unlock_irqrestore(&fhci->lock, flags); +} + +static int fhci_get_frame_number(struct usb_hcd *hcd) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + + return get_frame_num(fhci); +} + +static const struct hc_driver fhci_driver = { + .description = "fsl,usb-fhci", + .product_desc = "FHCI HOST Controller", + .hcd_priv_size = sizeof(struct fhci_hcd), + + /* generic hardware linkage */ + .irq = fhci_irq, + .flags = HCD_USB11 | HCD_MEMORY, + + /* basic lifecycle operation */ + .start = fhci_start, + .stop = fhci_stop, + + /* managing i/o requests and associated device resources */ + .urb_enqueue = fhci_urb_enqueue, + .urb_dequeue = fhci_urb_dequeue, + .endpoint_disable = fhci_endpoint_disable, + + /* scheduling support */ + .get_frame_number = fhci_get_frame_number, + + /* root hub support */ + .hub_status_data = fhci_hub_status_data, + .hub_control = fhci_hub_control, +}; + +static int __devinit of_fhci_probe(struct of_device *ofdev, + const struct of_device_id *ofid) +{ + struct device *dev = &ofdev->dev; + struct device_node *node = ofdev->node; + struct usb_hcd *hcd; + struct fhci_hcd *fhci; + struct resource usb_regs; + unsigned long pram_addr; + unsigned int usb_irq; + const char *sprop; + const u32 *iprop; + int size; + int ret; + int i; + int j; + + if (usb_disabled()) + return -ENODEV; + + sprop = of_get_property(node, "mode", NULL); + if (sprop && strcmp(sprop, "host")) + return -ENODEV; + + hcd = usb_create_hcd(&fhci_driver, dev, dev->bus_id); + if (!hcd) { + dev_err(dev, "could not create hcd\n"); + return -ENOMEM; + } + + fhci = hcd_to_fhci(hcd); + hcd->self.controller = dev; + dev_set_drvdata(dev, hcd); + + iprop = of_get_property(node, "hub-power-budget", &size); + if (iprop && size == sizeof(*iprop)) + hcd->power_budget = *iprop; + + /* FHCI registers. */ + ret = of_address_to_resource(node, 0, &usb_regs); + if (ret) { + dev_err(dev, "could not get regs\n"); + goto err_regs; + } + + hcd->regs = ioremap(usb_regs.start, usb_regs.end - usb_regs.start + 1); + if (!hcd->regs) { + dev_err(dev, "could not ioremap regs\n"); + ret = -ENOMEM; + goto err_regs; + } + fhci->regs = hcd->regs; + + /* Parameter RAM. */ + iprop = of_get_property(node, "reg", &size); + if (!iprop || size < sizeof(*iprop) * 4) { + dev_err(dev, "can't get pram offset\n"); + ret = -EINVAL; + goto err_pram; + } + + pram_addr = cpm_muram_alloc_fixed(iprop[2], FHCI_PRAM_SIZE); + if (IS_ERR_VALUE(pram_addr)) { + dev_err(dev, "failed to allocate usb pram\n"); + ret = -ENOMEM; + goto err_pram; + } + fhci->pram = cpm_muram_addr(pram_addr); + + /* GPIOs and pins */ + for (i = 0; i < NUM_GPIOS; i++) { + int gpio; + enum of_gpio_flags flags; + + gpio = of_get_gpio_flags(node, i, &flags); + fhci->gpios[i] = gpio; + fhci->alow_gpios[i] = flags & OF_GPIO_ACTIVE_LOW; + + if (!gpio_is_valid(gpio)) { + if (i < GPIO_SPEED) { + dev_err(dev, "incorrect GPIO%d: %d\n", + i, gpio); + goto err_gpios; + } else { + dev_info(dev, "assuming board doesn't have " + "%s gpio\n", i == GPIO_SPEED ? + "speed" : "power"); + continue; + } + } + + ret = gpio_request(gpio, dev->bus_id); + if (ret) { + dev_err(dev, "failed to request gpio %d", i); + goto err_gpios; + } + + if (i >= GPIO_SPEED) { + ret = gpio_direction_output(gpio, 0); + if (ret) { + dev_err(dev, "failed to set gpio %d as " + "an output\n", i); + i++; + goto err_gpios; + } + } + } + + for (j = 0; j < NUM_PINS; j++) { + fhci->pins[j] = qe_pin_request(ofdev->node, j); + if (IS_ERR(fhci->pins[j])) { + ret = PTR_ERR(fhci->pins[j]); + dev_err(dev, "can't get pin %d: %d\n", j, ret); + goto err_pins; + } + } + + /* Frame limit timer and its interrupt. */ + fhci->timer = gtm_get_timer16(); + if (IS_ERR(fhci->timer)) { + ret = PTR_ERR(fhci->timer); + dev_err(dev, "failed to request qe timer: %i", ret); + goto err_get_timer; + } + + ret = request_irq(fhci->timer->irq, fhci_frame_limit_timer_irq, + IRQF_DISABLED, "qe timer (usb)", hcd); + if (ret) { + dev_err(dev, "failed to request timer irq"); + goto err_timer_irq; + } + + /* USB Host interrupt. */ + usb_irq = irq_of_parse_and_map(node, 0); + if (usb_irq == NO_IRQ) { + dev_err(dev, "could not get usb irq\n"); + ret = -EINVAL; + goto err_usb_irq; + } + + /* Clocks. */ + sprop = of_get_property(node, "fsl,fullspeed-clock", NULL); + if (sprop) { + fhci->fullspeed_clk = qe_clock_source(sprop); + if (fhci->fullspeed_clk == QE_CLK_DUMMY) { + dev_err(dev, "wrong fullspeed-clock\n"); + ret = -EINVAL; + goto err_clocks; + } + } + + sprop = of_get_property(node, "fsl,lowspeed-clock", NULL); + if (sprop) { + fhci->lowspeed_clk = qe_clock_source(sprop); + if (fhci->lowspeed_clk == QE_CLK_DUMMY) { + dev_err(dev, "wrong lowspeed-clock\n"); + ret = -EINVAL; + goto err_clocks; + } + } + + if (fhci->fullspeed_clk == QE_CLK_NONE && + fhci->lowspeed_clk == QE_CLK_NONE) { + dev_err(dev, "no clocks specified\n"); + ret = -EINVAL; + goto err_clocks; + } + + dev_info(dev, "at 0x%p, irq %d\n", hcd->regs, usb_irq); + + fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); + + /* Start with full-speed, if possible. */ + if (fhci->fullspeed_clk != QE_CLK_NONE) { + fhci_config_transceiver(fhci, FHCI_PORT_FULL); + qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK); + } else { + fhci_config_transceiver(fhci, FHCI_PORT_LOW); + qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3); + } + + /* Clear and disable any pending interrupts. */ + out_be16(&fhci->regs->usb_event, 0xffff); + out_be16(&fhci->regs->usb_mask, 0); + + ret = usb_add_hcd(hcd, usb_irq, IRQF_DISABLED); + if (ret < 0) + goto err_add_hcd; + + fhci_dfs_create(fhci); + + return 0; + +err_add_hcd: +err_clocks: + irq_dispose_mapping(usb_irq); +err_usb_irq: + free_irq(fhci->timer->irq, hcd); +err_timer_irq: + gtm_put_timer16(fhci->timer); +err_get_timer: +err_pins: + while (--j >= 0) + qe_pin_free(fhci->pins[j]); +err_gpios: + while (--i >= 0) { + if (gpio_is_valid(fhci->gpios[i])) + gpio_free(fhci->gpios[i]); + } + cpm_muram_free(pram_addr); +err_pram: + iounmap(hcd->regs); +err_regs: + usb_put_hcd(hcd); + return ret; +} + +static int __devexit fhci_remove(struct device *dev) +{ + struct usb_hcd *hcd = dev_get_drvdata(dev); + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + int i; + int j; + + usb_remove_hcd(hcd); + free_irq(fhci->timer->irq, hcd); + gtm_put_timer16(fhci->timer); + cpm_muram_free(cpm_muram_offset(fhci->pram)); + for (i = 0; i < NUM_GPIOS; i++) { + if (!gpio_is_valid(fhci->gpios[i])) + continue; + gpio_free(fhci->gpios[i]); + } + for (j = 0; j < NUM_PINS; j++) + qe_pin_free(fhci->pins[j]); + fhci_dfs_destroy(fhci); + usb_put_hcd(hcd); + return 0; +} + +static int __devexit of_fhci_remove(struct of_device *ofdev) +{ + return fhci_remove(&ofdev->dev); +} + +static struct of_device_id of_fhci_match[] = { + { .compatible = "fsl,mpc8323-qe-usb", }, + {}, +}; +MODULE_DEVICE_TABLE(of, of_fhci_match); + +static struct of_platform_driver of_fhci_driver = { + .name = "fsl,usb-fhci", + .match_table = of_fhci_match, + .probe = of_fhci_probe, + .remove = __devexit_p(of_fhci_remove), +}; + +static int __init fhci_module_init(void) +{ + return of_register_platform_driver(&of_fhci_driver); +} +module_init(fhci_module_init); + +static void __exit fhci_module_exit(void) +{ + of_unregister_platform_driver(&of_fhci_driver); +} +module_exit(fhci_module_exit); + +MODULE_DESCRIPTION("USB Freescale Host Controller Interface Driver"); +MODULE_AUTHOR("Shlomi Gridish <gridish@freescale.com>, " + "Jerry Huang <Chang-Ming.Huang@freescale.com>, " + "Anton Vorontsov <avorontsov@ru.mvista.com>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/usb/host/fhci-hub.c b/drivers/usb/host/fhci-hub.c new file mode 100644 index 00000000000..0cfaedc3e12 --- /dev/null +++ b/drivers/usb/host/fhci-hub.c @@ -0,0 +1,345 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/io.h> +#include <linux/usb.h> +#include <linux/gpio.h> +#include <asm/qe.h> +#include "../core/hcd.h" +#include "fhci.h" + +/* virtual root hub specific descriptor */ +static u8 root_hub_des[] = { + 0x09, /* blength */ + 0x29, /* bDescriptorType;hub-descriptor */ + 0x01, /* bNbrPorts */ + 0x00, /* wHubCharacteristics */ + 0x00, + 0x01, /* bPwrOn2pwrGood;2ms */ + 0x00, /* bHubContrCurrent;0mA */ + 0x00, /* DeviceRemoveable */ + 0xff, /* PortPwrCtrlMask */ +}; + +static void fhci_gpio_set_value(struct fhci_hcd *fhci, int gpio_nr, bool on) +{ + int gpio = fhci->gpios[gpio_nr]; + bool alow = fhci->alow_gpios[gpio_nr]; + + if (!gpio_is_valid(gpio)) + return; + + gpio_set_value(gpio, on ^ alow); + mdelay(5); +} + +void fhci_config_transceiver(struct fhci_hcd *fhci, + enum fhci_port_status status) +{ + fhci_dbg(fhci, "-> %s: %d\n", __func__, status); + + switch (status) { + case FHCI_PORT_POWER_OFF: + fhci_gpio_set_value(fhci, GPIO_POWER, false); + break; + case FHCI_PORT_DISABLED: + case FHCI_PORT_WAITING: + fhci_gpio_set_value(fhci, GPIO_POWER, true); + break; + case FHCI_PORT_LOW: + fhci_gpio_set_value(fhci, GPIO_SPEED, false); + break; + case FHCI_PORT_FULL: + fhci_gpio_set_value(fhci, GPIO_SPEED, true); + break; + default: + WARN_ON(1); + break; + } + + fhci_dbg(fhci, "<- %s: %d\n", __func__, status); +} + +/* disable the USB port by clearing the EN bit in the USBMOD register */ +void fhci_port_disable(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = (struct fhci_usb *)fhci->usb_lld; + enum fhci_port_status port_status; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_stop_sof_timer(fhci); + + fhci_flush_all_transmissions(usb); + + fhci_usb_disable_interrupt((struct fhci_usb *)fhci->usb_lld); + port_status = usb->port_status; + usb->port_status = FHCI_PORT_DISABLED; + + /* Enable IDLE since we want to know if something comes along */ + usb->saved_msk |= USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + + /* check if during the disconnection process attached new device */ + if (port_status == FHCI_PORT_WAITING) + fhci_device_connected_interrupt(fhci); + usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_ENABLE; + usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; + fhci_usb_enable_interrupt((struct fhci_usb *)fhci->usb_lld); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +/* enable the USB port by setting the EN bit in the USBMOD register */ +void fhci_port_enable(void *lld) +{ + struct fhci_usb *usb = (struct fhci_usb *)lld; + struct fhci_hcd *fhci = usb->fhci; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_config_transceiver(fhci, usb->port_status); + + if ((usb->port_status != FHCI_PORT_FULL) && + (usb->port_status != FHCI_PORT_LOW)) + fhci_start_sof_timer(fhci); + + usb->vroot_hub->port.wPortStatus |= USB_PORT_STAT_ENABLE; + usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_ENABLE; + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +void fhci_io_port_generate_reset(struct fhci_hcd *fhci) +{ + fhci_dbg(fhci, "-> %s\n", __func__); + + gpio_direction_output(fhci->gpios[GPIO_USBOE], 0); + gpio_direction_output(fhci->gpios[GPIO_USBTP], 0); + gpio_direction_output(fhci->gpios[GPIO_USBTN], 0); + + mdelay(5); + + qe_pin_set_dedicated(fhci->pins[PIN_USBOE]); + qe_pin_set_dedicated(fhci->pins[PIN_USBTP]); + qe_pin_set_dedicated(fhci->pins[PIN_USBTN]); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +/* generate the RESET condition on the bus */ +void fhci_port_reset(void *lld) +{ + struct fhci_usb *usb = (struct fhci_usb *)lld; + struct fhci_hcd *fhci = usb->fhci; + u8 mode; + u16 mask; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_stop_sof_timer(fhci); + /* disable the USB controller */ + mode = in_8(&fhci->regs->usb_mod); + out_8(&fhci->regs->usb_mod, mode & (~USB_MODE_EN)); + + /* disable idle interrupts */ + mask = in_be16(&fhci->regs->usb_mask); + out_be16(&fhci->regs->usb_mask, mask & (~USB_E_IDLE_MASK)); + + fhci_io_port_generate_reset(fhci); + + /* enable interrupt on this endpoint */ + out_be16(&fhci->regs->usb_mask, mask); + + /* enable the USB controller */ + mode = in_8(&fhci->regs->usb_mod); + out_8(&fhci->regs->usb_mod, mode | USB_MODE_EN); + fhci_start_sof_timer(fhci); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +int fhci_hub_status_data(struct usb_hcd *hcd, char *buf) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + int ret = 0; + unsigned long flags; + + fhci_dbg(fhci, "-> %s\n", __func__); + + spin_lock_irqsave(&fhci->lock, flags); + + if (fhci->vroot_hub->port.wPortChange & (USB_PORT_STAT_C_CONNECTION | + USB_PORT_STAT_C_ENABLE | USB_PORT_STAT_C_SUSPEND | + USB_PORT_STAT_C_RESET | USB_PORT_STAT_C_OVERCURRENT)) { + *buf = 1 << 1; + ret = 1; + fhci_dbg(fhci, "-- %s\n", __func__); + } + + spin_unlock_irqrestore(&fhci->lock, flags); + + fhci_dbg(fhci, "<- %s\n", __func__); + + return ret; +} + +int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + int retval = 0; + int len = 0; + struct usb_hub_status *hub_status; + struct usb_port_status *port_status; + unsigned long flags; + + spin_lock_irqsave(&fhci->lock, flags); + + fhci_dbg(fhci, "-> %s\n", __func__); + + switch (typeReq) { + case ClearHubFeature: + switch (wValue) { + case C_HUB_LOCAL_POWER: + case C_HUB_OVER_CURRENT: + break; + default: + goto error; + } + break; + case ClearPortFeature: + fhci->vroot_hub->feature &= (1 << wValue); + + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_ENABLE; + fhci_port_disable(fhci); + break; + case USB_PORT_FEAT_C_ENABLE: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_ENABLE; + break; + case USB_PORT_FEAT_SUSPEND: + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_SUSPEND; + fhci_stop_sof_timer(fhci); + break; + case USB_PORT_FEAT_C_SUSPEND: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_SUSPEND; + break; + case USB_PORT_FEAT_POWER: + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_POWER; + fhci_config_transceiver(fhci, FHCI_PORT_POWER_OFF); + break; + case USB_PORT_FEAT_C_CONNECTION: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_CONNECTION; + break; + case USB_PORT_FEAT_C_OVER_CURRENT: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_OVERCURRENT; + break; + case USB_PORT_FEAT_C_RESET: + fhci->vroot_hub->port.wPortChange &= + ~USB_PORT_STAT_C_RESET; + break; + default: + goto error; + } + break; + case GetHubDescriptor: + memcpy(buf, root_hub_des, sizeof(root_hub_des)); + buf[3] = 0x11; /* per-port power, no ovrcrnt */ + len = (buf[0] < wLength) ? buf[0] : wLength; + break; + case GetHubStatus: + hub_status = (struct usb_hub_status *)buf; + hub_status->wHubStatus = + cpu_to_le16(fhci->vroot_hub->hub.wHubStatus); + hub_status->wHubChange = + cpu_to_le16(fhci->vroot_hub->hub.wHubChange); + len = 4; + break; + case GetPortStatus: + port_status = (struct usb_port_status *)buf; + port_status->wPortStatus = + cpu_to_le16(fhci->vroot_hub->port.wPortStatus); + port_status->wPortChange = + cpu_to_le16(fhci->vroot_hub->port.wPortChange); + len = 4; + break; + case SetHubFeature: + switch (wValue) { + case C_HUB_OVER_CURRENT: + case C_HUB_LOCAL_POWER: + break; + default: + goto error; + } + break; + case SetPortFeature: + fhci->vroot_hub->feature |= (1 << wValue); + + switch (wValue) { + case USB_PORT_FEAT_ENABLE: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_ENABLE; + fhci_port_enable(fhci->usb_lld); + break; + case USB_PORT_FEAT_SUSPEND: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_SUSPEND; + fhci_stop_sof_timer(fhci); + break; + case USB_PORT_FEAT_RESET: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_RESET; + fhci_port_reset(fhci->usb_lld); + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_ENABLE; + fhci->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_RESET; + break; + case USB_PORT_FEAT_POWER: + fhci->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_POWER; + fhci_config_transceiver(fhci, FHCI_PORT_WAITING); + break; + default: + goto error; + } + break; + default: +error: + retval = -EPIPE; + } + + fhci_dbg(fhci, "<- %s\n", __func__); + + spin_unlock_irqrestore(&fhci->lock, flags); + + return retval; +} diff --git a/drivers/usb/host/fhci-mem.c b/drivers/usb/host/fhci-mem.c new file mode 100644 index 00000000000..2c0736c9971 --- /dev/null +++ b/drivers/usb/host/fhci-mem.c @@ -0,0 +1,113 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/delay.h> +#include <linux/list.h> +#include <linux/usb.h> +#include "../core/hcd.h" +#include "fhci.h" + +static void init_td(struct td *td) +{ + memset(td, 0, sizeof(*td)); + INIT_LIST_HEAD(&td->node); + INIT_LIST_HEAD(&td->frame_lh); +} + +static void init_ed(struct ed *ed) +{ + memset(ed, 0, sizeof(*ed)); + INIT_LIST_HEAD(&ed->td_list); + INIT_LIST_HEAD(&ed->node); +} + +static struct td *get_empty_td(struct fhci_hcd *fhci) +{ + struct td *td; + + if (!list_empty(&fhci->empty_tds)) { + td = list_entry(fhci->empty_tds.next, struct td, node); + list_del(fhci->empty_tds.next); + } else { + td = kmalloc(sizeof(*td), GFP_ATOMIC); + if (!td) + fhci_err(fhci, "No memory to allocate to TD\n"); + else + init_td(td); + } + + return td; +} + +void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td) +{ + init_td(td); + list_add(&td->node, &fhci->empty_tds); +} + +struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci) +{ + struct ed *ed; + + if (!list_empty(&fhci->empty_eds)) { + ed = list_entry(fhci->empty_eds.next, struct ed, node); + list_del(fhci->empty_eds.next); + } else { + ed = kmalloc(sizeof(*ed), GFP_ATOMIC); + if (!ed) + fhci_err(fhci, "No memory to allocate to ED\n"); + else + init_ed(ed); + } + + return ed; +} + +void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed) +{ + init_ed(ed); + list_add(&ed->node, &fhci->empty_eds); +} + +struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb, + struct urb_priv *urb_priv, struct ed *ed, u16 index, + enum fhci_ta_type type, int toggle, u8 *data, u32 len, + u16 interval, u16 start_frame, bool ioc) +{ + struct td *td = get_empty_td(fhci); + + if (!td) + return NULL; + + td->urb = urb; + td->ed = ed; + td->type = type; + td->toggle = toggle; + td->data = data; + td->len = len; + td->iso_index = index; + td->interval = interval; + td->start_frame = start_frame; + td->ioc = ioc; + td->status = USB_TD_OK; + + urb_priv->tds[index] = td; + + return td; +} diff --git a/drivers/usb/host/fhci-q.c b/drivers/usb/host/fhci-q.c new file mode 100644 index 00000000000..b0a1446ba29 --- /dev/null +++ b/drivers/usb/host/fhci-q.c @@ -0,0 +1,284 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/usb.h> +#include "../core/hcd.h" +#include "fhci.h" + +/* maps the hardware error code to the USB error code */ +static int status_to_error(u32 status) +{ + if (status == USB_TD_OK) + return 0; + else if (status & USB_TD_RX_ER_CRC) + return -EILSEQ; + else if (status & USB_TD_RX_ER_NONOCT) + return -EPROTO; + else if (status & USB_TD_RX_ER_OVERUN) + return -ECOMM; + else if (status & USB_TD_RX_ER_BITSTUFF) + return -EPROTO; + else if (status & USB_TD_RX_ER_PID) + return -EILSEQ; + else if (status & (USB_TD_TX_ER_NAK | USB_TD_TX_ER_TIMEOUT)) + return -ETIMEDOUT; + else if (status & USB_TD_TX_ER_STALL) + return -EPIPE; + else if (status & USB_TD_TX_ER_UNDERUN) + return -ENOSR; + else if (status & USB_TD_RX_DATA_UNDERUN) + return -EREMOTEIO; + else if (status & USB_TD_RX_DATA_OVERUN) + return -EOVERFLOW; + else + return -EINVAL; +} + +void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td) +{ + list_add_tail(&td->frame_lh, &frame->tds_list); +} + +void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number) +{ + int i; + + for (i = 0; i < number; i++) { + struct td *td = td_list[i]; + list_add_tail(&td->node, &ed->td_list); + } + if (ed->td_head == NULL) + ed->td_head = td_list[0]; +} + +static struct td *peek_td_from_ed(struct ed *ed) +{ + struct td *td; + + if (!list_empty(&ed->td_list)) + td = list_entry(ed->td_list.next, struct td, node); + else + td = NULL; + + return td; +} + +struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame) +{ + struct td *td; + + if (!list_empty(&frame->tds_list)) { + td = list_entry(frame->tds_list.next, struct td, frame_lh); + list_del_init(frame->tds_list.next); + } else + td = NULL; + + return td; +} + +struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame) +{ + struct td *td; + + if (!list_empty(&frame->tds_list)) + td = list_entry(frame->tds_list.next, struct td, frame_lh); + else + td = NULL; + + return td; +} + +struct td *fhci_remove_td_from_ed(struct ed *ed) +{ + struct td *td; + + if (!list_empty(&ed->td_list)) { + td = list_entry(ed->td_list.next, struct td, node); + list_del_init(ed->td_list.next); + + /* if this TD was the ED's head, find next TD */ + if (!list_empty(&ed->td_list)) + ed->td_head = list_entry(ed->td_list.next, struct td, + node); + else + ed->td_head = NULL; + } else + td = NULL; + + return td; +} + +struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list) +{ + struct td *td; + + if (!list_empty(&p_list->done_list)) { + td = list_entry(p_list->done_list.next, struct td, node); + list_del_init(p_list->done_list.next); + } else + td = NULL; + + return td; +} + +void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed) +{ + struct td *td; + + td = ed->td_head; + list_del_init(&td->node); + + /* If this TD was the ED's head,find next TD */ + if (!list_empty(&ed->td_list)) + ed->td_head = list_entry(ed->td_list.next, struct td, node); + else { + ed->td_head = NULL; + ed->state = FHCI_ED_SKIP; + } + ed->toggle_carry = td->toggle; + list_add_tail(&td->node, &usb->hc_list->done_list); + if (td->ioc) + usb->transfer_confirm(usb->fhci); +} + +/* free done FHCI URB resource such as ED and TD */ +static void free_urb_priv(struct fhci_hcd *fhci, struct urb *urb) +{ + int i; + struct urb_priv *urb_priv = urb->hcpriv; + struct ed *ed = urb_priv->ed; + + for (i = 0; i < urb_priv->num_of_tds; i++) { + list_del_init(&urb_priv->tds[i]->node); + fhci_recycle_empty_td(fhci, urb_priv->tds[i]); + } + + /* if this TD was the ED's head,find the next TD */ + if (!list_empty(&ed->td_list)) + ed->td_head = list_entry(ed->td_list.next, struct td, node); + else + ed->td_head = NULL; + + kfree(urb_priv->tds); + kfree(urb_priv); + urb->hcpriv = NULL; + + /* if this TD was the ED's head,find next TD */ + if (ed->td_head == NULL) + list_del_init(&ed->node); + fhci->active_urbs--; +} + +/* this routine called to complete and free done URB */ +void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb) +{ + free_urb_priv(fhci, urb); + + if (urb->status == -EINPROGRESS) { + if (urb->actual_length != urb->transfer_buffer_length && + urb->transfer_flags & URB_SHORT_NOT_OK) + urb->status = -EREMOTEIO; + else + urb->status = 0; + } + + usb_hcd_unlink_urb_from_ep(fhci_to_hcd(fhci), urb); + + spin_unlock(&fhci->lock); + + usb_hcd_giveback_urb(fhci_to_hcd(fhci), urb, urb->status); + + spin_lock(&fhci->lock); +} + +/* + * caculate transfer length/stats and update the urb + * Precondition: irqsafe(only for urb-?status locking) + */ +void fhci_done_td(struct urb *urb, struct td *td) +{ + struct ed *ed = td->ed; + u32 cc = td->status; + + /* ISO...drivers see per-TD length/status */ + if (ed->mode == FHCI_TF_ISO) { + u32 len; + if (!(urb->transfer_flags & URB_SHORT_NOT_OK && + cc == USB_TD_RX_DATA_UNDERUN)) + cc = USB_TD_OK; + + if (usb_pipeout(urb->pipe)) + len = urb->iso_frame_desc[td->iso_index].length; + else + len = td->actual_len; + + urb->actual_length += len; + urb->iso_frame_desc[td->iso_index].actual_length = len; + urb->iso_frame_desc[td->iso_index].status = + status_to_error(cc); + } + + /* BULK,INT,CONTROL... drivers see aggregate length/status, + * except that "setup" bytes aren't counted and "short" transfers + * might not be reported as errors. + */ + else { + if (td->error_cnt >= 3) + urb->error_count = 3; + + /* control endpoint only have soft stalls */ + + /* update packet status if needed(short may be ok) */ + if (!(urb->transfer_flags & URB_SHORT_NOT_OK) && + cc == USB_TD_RX_DATA_UNDERUN) { + ed->state = FHCI_ED_OPER; + cc = USB_TD_OK; + } + if (cc != USB_TD_OK) { + if (urb->status == -EINPROGRESS) + urb->status = status_to_error(cc); + } + + /* count all non-empty packets except control SETUP packet */ + if (td->type != FHCI_TA_SETUP || td->iso_index != 0) + urb->actual_length += td->actual_len; + } +} + +/* there are some pedning request to unlink */ +void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed) +{ + struct td *td = peek_td_from_ed(ed); + struct urb *urb = td->urb; + struct urb_priv *urb_priv = urb->hcpriv; + + if (urb_priv->state == URB_DEL) { + td = fhci_remove_td_from_ed(ed); + /* HC may have partly processed this TD */ + if (td->status != USB_TD_INPROGRESS) + fhci_done_td(urb, td); + + /* URB is done;clean up */ + if (++(urb_priv->tds_cnt) == urb_priv->num_of_tds) + fhci_urb_complete_free(fhci, urb); + } +} diff --git a/drivers/usb/host/fhci-sched.c b/drivers/usb/host/fhci-sched.c new file mode 100644 index 00000000000..bb63b68ddb7 --- /dev/null +++ b/drivers/usb/host/fhci-sched.c @@ -0,0 +1,888 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/interrupt.h> +#include <linux/io.h> +#include <linux/usb.h> +#include <asm/qe.h> +#include <asm/fsl_gtm.h> +#include "../core/hcd.h" +#include "fhci.h" + +static void recycle_frame(struct fhci_usb *usb, struct packet *pkt) +{ + pkt->data = NULL; + pkt->len = 0; + pkt->status = USB_TD_OK; + pkt->info = 0; + pkt->priv_data = NULL; + + cq_put(usb->ep0->empty_frame_Q, pkt); +} + +/* confirm submitted packet */ +void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt) +{ + struct td *td; + struct packet *td_pkt; + struct ed *ed; + u32 trans_len; + bool td_done = false; + + td = fhci_remove_td_from_frame(usb->actual_frame); + td_pkt = td->pkt; + trans_len = pkt->len; + td->status = pkt->status; + if (td->type == FHCI_TA_IN && td_pkt->info & PKT_DUMMY_PACKET) { + if ((td->data + td->actual_len) && trans_len) + memcpy(td->data + td->actual_len, pkt->data, + trans_len); + cq_put(usb->ep0->dummy_packets_Q, pkt->data); + } + + recycle_frame(usb, pkt); + + ed = td->ed; + if (ed->mode == FHCI_TF_ISO) { + if (ed->td_list.next->next != &ed->td_list) { + struct td *td_next = + list_entry(ed->td_list.next->next, struct td, + node); + + td_next->start_frame = usb->actual_frame->frame_num; + } + td->actual_len = trans_len; + td_done = true; + } else if ((td->status & USB_TD_ERROR) && + !(td->status & USB_TD_TX_ER_NAK)) { + /* + * There was an error on the transaction (but not NAK). + * If it is fatal error (data underrun, stall, bad pid or 3 + * errors exceeded), mark this TD as done. + */ + if ((td->status & USB_TD_RX_DATA_UNDERUN) || + (td->status & USB_TD_TX_ER_STALL) || + (td->status & USB_TD_RX_ER_PID) || + (++td->error_cnt >= 3)) { + ed->state = FHCI_ED_HALTED; + td_done = true; + + if (td->status & USB_TD_RX_DATA_UNDERUN) { + fhci_dbg(usb->fhci, "td err fu\n"); + td->toggle = !td->toggle; + td->actual_len += trans_len; + } else { + fhci_dbg(usb->fhci, "td err f!u\n"); + } + } else { + fhci_dbg(usb->fhci, "td err !f\n"); + /* it is not a fatal error -retry this transaction */ + td->nak_cnt = 0; + td->error_cnt++; + td->status = USB_TD_OK; + } + } else if (td->status & USB_TD_TX_ER_NAK) { + /* there was a NAK response */ + fhci_vdbg(usb->fhci, "td nack\n"); + td->nak_cnt++; + td->error_cnt = 0; + td->status = USB_TD_OK; + } else { + /* there was no error on transaction */ + td->error_cnt = 0; + td->nak_cnt = 0; + td->toggle = !td->toggle; + td->actual_len += trans_len; + + if (td->len == td->actual_len) + td_done = true; + } + + if (td_done) + fhci_move_td_from_ed_to_done_list(usb, ed); +} + +/* + * Flush all transmitted packets from BDs + * This routine is called when disabling the USB port to flush all + * transmissions that are allready scheduled in the BDs + */ +void fhci_flush_all_transmissions(struct fhci_usb *usb) +{ + u8 mode; + struct td *td; + + mode = in_8(&usb->fhci->regs->usb_mod); + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_EN); + + fhci_flush_bds(usb); + + while ((td = fhci_peek_td_from_frame(usb->actual_frame)) != NULL) { + struct packet *pkt = td->pkt; + + pkt->status = USB_TD_TX_ER_TIMEOUT; + fhci_transaction_confirm(usb, pkt); + } + + usb->actual_frame->frame_status = FRAME_END_TRANSMISSION; + + /* reset the event register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + /* enable the USB controller */ + out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN); +} + +/* + * This function forms the packet and transmit the packet. This function + * will handle all endpoint type:ISO,interrupt,control and bulk + */ +static int add_packet(struct fhci_usb *usb, struct ed *ed, struct td *td) +{ + u32 fw_transaction_time, len = 0; + struct packet *pkt; + u8 *data = NULL; + + /* calcalate data address,len and toggle and then add the transaction */ + if (td->toggle == USB_TD_TOGGLE_CARRY) + td->toggle = ed->toggle_carry; + + switch (ed->mode) { + case FHCI_TF_ISO: + len = td->len; + if (td->type != FHCI_TA_IN) + data = td->data; + break; + case FHCI_TF_CTRL: + case FHCI_TF_BULK: + len = min(td->len - td->actual_len, ed->max_pkt_size); + if (!((td->type == FHCI_TA_IN) && + ((len + td->actual_len) == td->len))) + data = td->data + td->actual_len; + break; + case FHCI_TF_INTR: + len = min(td->len, ed->max_pkt_size); + if (!((td->type == FHCI_TA_IN) && + ((td->len + CRC_SIZE) >= ed->max_pkt_size))) + data = td->data; + break; + default: + break; + } + + if (usb->port_status == FHCI_PORT_FULL) + fw_transaction_time = (((len + PROTOCOL_OVERHEAD) * 11) >> 4); + else + fw_transaction_time = ((len + PROTOCOL_OVERHEAD) * 6); + + /* check if there's enough space in this frame to submit this TD */ + if (usb->actual_frame->total_bytes + len + PROTOCOL_OVERHEAD >= + usb->max_bytes_per_frame) { + fhci_vdbg(usb->fhci, "not enough space in this frame: " + "%d %d %d\n", usb->actual_frame->total_bytes, len, + usb->max_bytes_per_frame); + return -1; + } + + /* check if there's enough time in this frame to submit this TD */ + if (usb->actual_frame->frame_status != FRAME_IS_PREPARED && + (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION || + (fw_transaction_time + usb->sw_transaction_time >= + 1000 - fhci_get_sof_timer_count(usb)))) { + fhci_dbg(usb->fhci, "not enough time in this frame\n"); + return -1; + } + + /* update frame object fields before transmitting */ + pkt = cq_get(usb->ep0->empty_frame_Q); + if (!pkt) { + fhci_dbg(usb->fhci, "there is no empty frame\n"); + return -1; + } + td->pkt = pkt; + + pkt->info = 0; + if (data == NULL) { + data = cq_get(usb->ep0->dummy_packets_Q); + BUG_ON(!data); + pkt->info = PKT_DUMMY_PACKET; + } + pkt->data = data; + pkt->len = len; + pkt->status = USB_TD_OK; + /* update TD status field before transmitting */ + td->status = USB_TD_INPROGRESS; + /* update actual frame time object with the actual transmission */ + usb->actual_frame->total_bytes += (len + PROTOCOL_OVERHEAD); + fhci_add_td_to_frame(usb->actual_frame, td); + + if (usb->port_status != FHCI_PORT_FULL && + usb->port_status != FHCI_PORT_LOW) { + pkt->status = USB_TD_TX_ER_TIMEOUT; + pkt->len = 0; + fhci_transaction_confirm(usb, pkt); + } else if (fhci_host_transaction(usb, pkt, td->type, ed->dev_addr, + ed->ep_addr, ed->mode, ed->speed, td->toggle)) { + /* remove TD from actual frame */ + list_del_init(&td->frame_lh); + td->status = USB_TD_OK; + if (pkt->info & PKT_DUMMY_PACKET) + cq_put(usb->ep0->dummy_packets_Q, pkt->data); + recycle_frame(usb, pkt); + usb->actual_frame->total_bytes -= (len + PROTOCOL_OVERHEAD); + fhci_err(usb->fhci, "host transaction failed\n"); + return -1; + } + + return len; +} + +static void move_head_to_tail(struct list_head *list) +{ + struct list_head *node = list->next; + + if (!list_empty(list)) { + list_del(node); + list_add_tail(node, list); + } +} + +/* + * This function goes through the endpoint list and schedules the + * transactions within this list + */ +static int scan_ed_list(struct fhci_usb *usb, + struct list_head *list, enum fhci_tf_mode list_type) +{ + static const int frame_part[4] = { + [FHCI_TF_CTRL] = MAX_BYTES_PER_FRAME, + [FHCI_TF_ISO] = (MAX_BYTES_PER_FRAME * + MAX_PERIODIC_FRAME_USAGE) / 100, + [FHCI_TF_BULK] = MAX_BYTES_PER_FRAME, + [FHCI_TF_INTR] = (MAX_BYTES_PER_FRAME * + MAX_PERIODIC_FRAME_USAGE) / 100 + }; + struct ed *ed; + struct td *td; + int ans = 1; + u32 save_transaction_time = usb->sw_transaction_time; + + list_for_each_entry(ed, list, node) { + td = ed->td_head; + + if (!td || (td && td->status == USB_TD_INPROGRESS)) + continue; + + if (ed->state != FHCI_ED_OPER) { + if (ed->state == FHCI_ED_URB_DEL) { + td->status = USB_TD_OK; + fhci_move_td_from_ed_to_done_list(usb, ed); + ed->state = FHCI_ED_SKIP; + } + continue; + } + + /* + * if it isn't interrupt pipe or it is not iso pipe and the + * interval time passed + */ + if ((list_type == FHCI_TF_INTR || list_type == FHCI_TF_ISO) && + (((usb->actual_frame->frame_num - + td->start_frame) & 0x7ff) < td->interval)) + continue; + + if (add_packet(usb, ed, td) < 0) + continue; + + /* update time stamps in the TD */ + td->start_frame = usb->actual_frame->frame_num; + usb->sw_transaction_time += save_transaction_time; + + if (usb->actual_frame->total_bytes >= + usb->max_bytes_per_frame) { + usb->actual_frame->frame_status = + FRAME_DATA_END_TRANSMISSION; + fhci_push_dummy_bd(usb->ep0); + ans = 0; + break; + } + + if (usb->actual_frame->total_bytes >= frame_part[list_type]) + break; + } + + /* be fair to each ED(move list head around) */ + move_head_to_tail(list); + usb->sw_transaction_time = save_transaction_time; + + return ans; +} + +static u32 rotate_frames(struct fhci_usb *usb) +{ + struct fhci_hcd *fhci = usb->fhci; + + if (!list_empty(&usb->actual_frame->tds_list)) { + if ((((in_be16(&fhci->pram->frame_num) & 0x07ff) - + usb->actual_frame->frame_num) & 0x7ff) > 5) + fhci_flush_actual_frame(usb); + else + return -EINVAL; + } + + usb->actual_frame->frame_status = FRAME_IS_PREPARED; + usb->actual_frame->frame_num = in_be16(&fhci->pram->frame_num) & 0x7ff; + usb->actual_frame->total_bytes = 0; + + return 0; +} + +/* + * This function schedule the USB transaction and will process the + * endpoint in the following order: iso, interrupt, control and bulk. + */ +void fhci_schedule_transactions(struct fhci_usb *usb) +{ + int left = 1; + + if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION) + if (rotate_frames(usb) != 0) + return; + + if (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION) + return; + + if (usb->actual_frame->total_bytes == 0) { + /* + * schedule the next available ISO transfer + *or next stage of the ISO transfer + */ + scan_ed_list(usb, &usb->hc_list->iso_list, FHCI_TF_ISO); + + /* + * schedule the next available interrupt transfer or + * the next stage of the interrupt transfer + */ + scan_ed_list(usb, &usb->hc_list->intr_list, FHCI_TF_INTR); + + /* + * schedule the next available control transfer + * or the next stage of the control transfer + */ + left = scan_ed_list(usb, &usb->hc_list->ctrl_list, + FHCI_TF_CTRL); + } + + /* + * schedule the next available bulk transfer or the next stage of the + * bulk transfer + */ + if (left > 0) + scan_ed_list(usb, &usb->hc_list->bulk_list, FHCI_TF_BULK); +} + +/* Handles SOF interrupt */ +static void sof_interrupt(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + if ((usb->port_status == FHCI_PORT_DISABLED) && + (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_CONNECTION) && + !(usb->vroot_hub->port.wPortChange & USB_PORT_STAT_C_CONNECTION)) { + if (usb->vroot_hub->port.wPortStatus & USB_PORT_STAT_LOW_SPEED) + usb->port_status = FHCI_PORT_LOW; + else + usb->port_status = FHCI_PORT_FULL; + /* Disable IDLE */ + usb->saved_msk &= ~USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + } + + gtm_set_exact_timer16(fhci->timer, usb->max_frame_usage, false); + + fhci_host_transmit_actual_frame(usb); + usb->actual_frame->frame_status = FRAME_IS_TRANSMITTED; + + fhci_schedule_transactions(usb); +} + +/* Handles device disconnected interrupt on port */ +void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci) +{ + struct fhci_usb *usb = fhci->usb_lld; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_usb_disable_interrupt(usb); + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS); + usb->port_status = FHCI_PORT_DISABLED; + + fhci_stop_sof_timer(fhci); + + /* Enable IDLE since we want to know if something comes along */ + usb->saved_msk |= USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, usb->saved_msk); + + usb->vroot_hub->port.wPortStatus &= ~USB_PORT_STAT_CONNECTION; + usb->vroot_hub->port.wPortChange |= USB_PORT_STAT_C_CONNECTION; + usb->max_bytes_per_frame = 0; + fhci_usb_enable_interrupt(usb); + + fhci_dbg(fhci, "<- %s\n", __func__); +} + +/* detect a new device connected on the USB port */ +void fhci_device_connected_interrupt(struct fhci_hcd *fhci) +{ + + struct fhci_usb *usb = fhci->usb_lld; + int state; + int ret; + + fhci_dbg(fhci, "-> %s\n", __func__); + + fhci_usb_disable_interrupt(usb); + state = fhci_ioports_check_bus_state(fhci); + + /* low-speed device was connected to the USB port */ + if (state == 1) { + ret = qe_usb_clock_set(fhci->lowspeed_clk, USB_CLOCK >> 3); + if (ret) { + fhci_warn(fhci, "Low-Speed device is not supported, " + "try use BRGx\n"); + goto out; + } + + usb->port_status = FHCI_PORT_LOW; + setbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS); + usb->vroot_hub->port.wPortStatus |= + (USB_PORT_STAT_LOW_SPEED | + USB_PORT_STAT_CONNECTION); + usb->vroot_hub->port.wPortChange |= + USB_PORT_STAT_C_CONNECTION; + usb->max_bytes_per_frame = + (MAX_BYTES_PER_FRAME >> 3) - 7; + fhci_port_enable(usb); + } else if (state == 2) { + ret = qe_usb_clock_set(fhci->fullspeed_clk, USB_CLOCK); + if (ret) { + fhci_warn(fhci, "Full-Speed device is not supported, " + "try use CLKx\n"); + goto out; + } + + usb->port_status = FHCI_PORT_FULL; + clrbits8(&usb->fhci->regs->usb_mod, USB_MODE_LSS); + usb->vroot_hub->port.wPortStatus &= + ~USB_PORT_STAT_LOW_SPEED; + usb->vroot_hub->port.wPortStatus |= + USB_PORT_STAT_CONNECTION; + usb->vroot_hub->port.wPortChange |= + USB_PORT_STAT_C_CONNECTION; + usb->max_bytes_per_frame = (MAX_BYTES_PER_FRAME - 15); + fhci_port_enable(usb); + } +out: + fhci_usb_enable_interrupt(usb); + fhci_dbg(fhci, "<- %s\n", __func__); +} + +irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd) +{ + struct usb_hcd *hcd = _hcd; + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + struct fhci_usb *usb = fhci->usb_lld; + + spin_lock(&fhci->lock); + + gtm_set_exact_timer16(fhci->timer, 1000, false); + + if (usb->actual_frame->frame_status == FRAME_IS_TRANSMITTED) { + usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION; + fhci_push_dummy_bd(usb->ep0); + } + + fhci_schedule_transactions(usb); + + spin_unlock(&fhci->lock); + + return IRQ_HANDLED; +} + +/* Cancel transmission on the USB endpoint */ +static void abort_transmission(struct fhci_usb *usb) +{ + fhci_dbg(usb->fhci, "-> %s\n", __func__); + /* issue stop Tx command */ + qe_issue_cmd(QE_USB_STOP_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0); + /* flush Tx FIFOs */ + out_8(&usb->fhci->regs->usb_comm, USB_CMD_FLUSH_FIFO | EP_ZERO); + udelay(1000); + /* reset Tx BDs */ + fhci_flush_bds(usb); + /* issue restart Tx command */ + qe_issue_cmd(QE_USB_RESTART_TX, QE_CR_SUBBLOCK_USB, EP_ZERO, 0); + fhci_dbg(usb->fhci, "<- %s\n", __func__); +} + +irqreturn_t fhci_irq(struct usb_hcd *hcd) +{ + struct fhci_hcd *fhci = hcd_to_fhci(hcd); + struct fhci_usb *usb; + u16 usb_er = 0; + unsigned long flags; + + spin_lock_irqsave(&fhci->lock, flags); + + usb = fhci->usb_lld; + + usb_er |= in_be16(&usb->fhci->regs->usb_event) & + in_be16(&usb->fhci->regs->usb_mask); + + /* clear event bits for next time */ + out_be16(&usb->fhci->regs->usb_event, usb_er); + + fhci_dbg_isr(fhci, usb_er); + + if (usb_er & USB_E_RESET_MASK) { + if ((usb->port_status == FHCI_PORT_FULL) || + (usb->port_status == FHCI_PORT_LOW)) { + fhci_device_disconnected_interrupt(fhci); + usb_er &= ~USB_E_IDLE_MASK; + } else if (usb->port_status == FHCI_PORT_WAITING) { + usb->port_status = FHCI_PORT_DISCONNECTING; + + /* Turn on IDLE since we want to disconnect */ + usb->saved_msk |= USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_event, + usb->saved_msk); + } else if (usb->port_status == FHCI_PORT_DISABLED) { + if (fhci_ioports_check_bus_state(fhci) == 1 && + usb->port_status != FHCI_PORT_LOW && + usb->port_status != FHCI_PORT_FULL) + fhci_device_connected_interrupt(fhci); + } + usb_er &= ~USB_E_RESET_MASK; + } + + if (usb_er & USB_E_MSF_MASK) { + abort_transmission(fhci->usb_lld); + usb_er &= ~USB_E_MSF_MASK; + } + + if (usb_er & (USB_E_SOF_MASK | USB_E_SFT_MASK)) { + sof_interrupt(fhci); + usb_er &= ~(USB_E_SOF_MASK | USB_E_SFT_MASK); + } + + if (usb_er & USB_E_TXB_MASK) { + fhci_tx_conf_interrupt(fhci->usb_lld); + usb_er &= ~USB_E_TXB_MASK; + } + + if (usb_er & USB_E_TXE1_MASK) { + fhci_tx_conf_interrupt(fhci->usb_lld); + usb_er &= ~USB_E_TXE1_MASK; + } + + if (usb_er & USB_E_IDLE_MASK) { + if (usb->port_status == FHCI_PORT_DISABLED && + usb->port_status != FHCI_PORT_LOW && + usb->port_status != FHCI_PORT_FULL) { + usb_er &= ~USB_E_RESET_MASK; + fhci_device_connected_interrupt(fhci); + } else if (usb->port_status == + FHCI_PORT_DISCONNECTING) { + /* XXX usb->port_status = FHCI_PORT_WAITING; */ + /* Disable IDLE */ + usb->saved_msk &= ~USB_E_IDLE_MASK; + out_be16(&usb->fhci->regs->usb_mask, + usb->saved_msk); + } else { + fhci_dbg_isr(fhci, -1); + } + + usb_er &= ~USB_E_IDLE_MASK; + } + + spin_unlock_irqrestore(&fhci->lock, flags); + + return IRQ_HANDLED; +} + + +/* + * Process normal completions(error or sucess) and clean the schedule. + * + * This is the main path for handing urbs back to drivers. The only other patth + * is process_del_list(),which unlinks URBs by scanning EDs,instead of scanning + * the (re-reversed) done list as this does. + */ +static void process_done_list(unsigned long data) +{ + struct urb *urb; + struct ed *ed; + struct td *td; + struct urb_priv *urb_priv; + struct fhci_hcd *fhci = (struct fhci_hcd *)data; + + disable_irq(fhci->timer->irq); + disable_irq(fhci_to_hcd(fhci)->irq); + spin_lock(&fhci->lock); + + td = fhci_remove_td_from_done_list(fhci->hc_list); + while (td != NULL) { + urb = td->urb; + urb_priv = urb->hcpriv; + ed = td->ed; + + /* update URB's length and status from TD */ + fhci_done_td(urb, td); + urb_priv->tds_cnt++; + + /* + * if all this urb's TDs are done, call complete() + * Interrupt transfers are the onley special case: + * they are reissued,until "deleted" by usb_unlink_urb + * (real work done in a SOF intr, by process_del_list) + */ + if (urb_priv->tds_cnt == urb_priv->num_of_tds) { + fhci_urb_complete_free(fhci, urb); + } else if (urb_priv->state == URB_DEL && + ed->state == FHCI_ED_SKIP) { + fhci_del_ed_list(fhci, ed); + ed->state = FHCI_ED_OPER; + } else if (ed->state == FHCI_ED_HALTED) { + urb_priv->state = URB_DEL; + ed->state = FHCI_ED_URB_DEL; + fhci_del_ed_list(fhci, ed); + ed->state = FHCI_ED_OPER; + } + + td = fhci_remove_td_from_done_list(fhci->hc_list); + } + + spin_unlock(&fhci->lock); + enable_irq(fhci->timer->irq); + enable_irq(fhci_to_hcd(fhci)->irq); +} + +DECLARE_TASKLET(fhci_tasklet, process_done_list, 0); + +/* transfer complted callback */ +u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci) +{ + if (!fhci->process_done_task->state) + tasklet_schedule(fhci->process_done_task); + return 0; +} + +/* + * adds urb to the endpoint descriptor list + * arguments: + * fhci data structure for the Low level host controller + * ep USB Host endpoint data structure + * urb USB request block data structure + */ +void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb) +{ + struct ed *ed = urb->ep->hcpriv; + struct urb_priv *urb_priv = urb->hcpriv; + u32 data_len = urb->transfer_buffer_length; + int urb_state = 0; + int toggle = 0; + struct td *td; + u8 *data; + u16 cnt = 0; + + if (ed == NULL) { + ed = fhci_get_empty_ed(fhci); + ed->dev_addr = usb_pipedevice(urb->pipe); + ed->ep_addr = usb_pipeendpoint(urb->pipe); + switch (usb_pipetype(urb->pipe)) { + case PIPE_CONTROL: + ed->mode = FHCI_TF_CTRL; + break; + case PIPE_BULK: + ed->mode = FHCI_TF_BULK; + break; + case PIPE_INTERRUPT: + ed->mode = FHCI_TF_INTR; + break; + case PIPE_ISOCHRONOUS: + ed->mode = FHCI_TF_ISO; + break; + default: + break; + } + ed->speed = (urb->dev->speed == USB_SPEED_LOW) ? + FHCI_LOW_SPEED : FHCI_FULL_SPEED; + ed->max_pkt_size = usb_maxpacket(urb->dev, + urb->pipe, usb_pipeout(urb->pipe)); + urb->ep->hcpriv = ed; + fhci_dbg(fhci, "new ep speed=%d max_pkt_size=%d\n", + ed->speed, ed->max_pkt_size); + } + + /* for ISO transfer calculate start frame index */ + if (ed->mode == FHCI_TF_ISO && urb->transfer_flags & URB_ISO_ASAP) + urb->start_frame = ed->td_head ? ed->last_iso + 1 : + get_frame_num(fhci); + + /* + * OHCI handles the DATA toggle itself,we just use the USB + * toggle bits + */ + if (usb_gettoggle(urb->dev, usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe))) + toggle = USB_TD_TOGGLE_CARRY; + else { + toggle = USB_TD_TOGGLE_DATA0; + usb_settoggle(urb->dev, usb_pipeendpoint(urb->pipe), + usb_pipeout(urb->pipe), 1); + } + + urb_priv->tds_cnt = 0; + urb_priv->ed = ed; + if (data_len > 0) + data = urb->transfer_buffer; + else + data = NULL; + + switch (ed->mode) { + case FHCI_TF_BULK: + if (urb->transfer_flags & URB_ZERO_PACKET && + urb->transfer_buffer_length > 0 && + ((urb->transfer_buffer_length % + usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe))) == 0)) + urb_state = US_BULK0; + while (data_len > 4096) { + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + cnt ? USB_TD_TOGGLE_CARRY : + toggle, + data, 4096, 0, 0, true); + data += 4096; + data_len -= 4096; + cnt++; + } + + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN, + cnt ? USB_TD_TOGGLE_CARRY : toggle, + data, data_len, 0, 0, true); + cnt++; + + if (urb->transfer_flags & URB_ZERO_PACKET && + cnt < urb_priv->num_of_tds) { + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + USB_TD_TOGGLE_CARRY, NULL, 0, 0, 0, true); + cnt++; + } + break; + case FHCI_TF_INTR: + urb->start_frame = get_frame_num(fhci) + 1; + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : FHCI_TA_IN, + USB_TD_TOGGLE_DATA0, data, data_len, + urb->interval, urb->start_frame, true); + break; + case FHCI_TF_CTRL: + ed->dev_addr = usb_pipedevice(urb->pipe); + ed->max_pkt_size = usb_maxpacket(urb->dev, urb->pipe, + usb_pipeout(urb->pipe)); + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, FHCI_TA_SETUP, + USB_TD_TOGGLE_DATA0, urb->setup_packet, 8, 0, 0, true); + + if (data_len > 0) { + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + USB_TD_TOGGLE_DATA1, data, data_len, 0, 0, + true); + } + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt++, + usb_pipeout(urb->pipe) ? FHCI_TA_IN : FHCI_TA_OUT, + USB_TD_TOGGLE_DATA1, data, 0, 0, 0, true); + urb_state = US_CTRL_SETUP; + break; + case FHCI_TF_ISO: + for (cnt = 0; cnt < urb->number_of_packets; cnt++) { + u16 frame = urb->start_frame; + + /* + * FIXME scheduling should handle frame counter + * roll-around ... exotic case (and OHCI has + * a 2^16 iso range, vs other HCs max of 2^10) + */ + frame += cnt * urb->interval; + frame &= 0x07ff; + td = fhci_td_fill(fhci, urb, urb_priv, ed, cnt, + usb_pipeout(urb->pipe) ? FHCI_TA_OUT : + FHCI_TA_IN, + USB_TD_TOGGLE_DATA0, + data + urb->iso_frame_desc[cnt].offset, + urb->iso_frame_desc[cnt].length, + urb->interval, frame, true); + } + break; + default: + break; + } + + /* + * set the state of URB + * control pipe:3 states -- setup,data,status + * interrupt and bulk pipe:1 state -- data + */ + urb->pipe &= ~0x1f; + urb->pipe |= urb_state & 0x1f; + + urb_priv->state = URB_INPROGRESS; + + if (!ed->td_head) { + ed->state = FHCI_ED_OPER; + switch (ed->mode) { + case FHCI_TF_CTRL: + list_add(&ed->node, &fhci->hc_list->ctrl_list); + break; + case FHCI_TF_BULK: + list_add(&ed->node, &fhci->hc_list->bulk_list); + break; + case FHCI_TF_INTR: + list_add(&ed->node, &fhci->hc_list->intr_list); + break; + case FHCI_TF_ISO: + list_add(&ed->node, &fhci->hc_list->iso_list); + break; + default: + break; + } + } + + fhci_add_tds_to_ed(ed, urb_priv->tds, urb_priv->num_of_tds); + fhci->active_urbs++; +} diff --git a/drivers/usb/host/fhci-tds.c b/drivers/usb/host/fhci-tds.c new file mode 100644 index 00000000000..b4033229031 --- /dev/null +++ b/drivers/usb/host/fhci-tds.c @@ -0,0 +1,626 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/errno.h> +#include <linux/list.h> +#include <linux/io.h> +#include <linux/usb.h> +#include "../core/hcd.h" +#include "fhci.h" + +#define DUMMY_BD_BUFFER 0xdeadbeef +#define DUMMY2_BD_BUFFER 0xbaadf00d + +/* Transaction Descriptors bits */ +#define TD_R 0x8000 /* ready bit */ +#define TD_W 0x2000 /* wrap bit */ +#define TD_I 0x1000 /* interrupt on completion */ +#define TD_L 0x0800 /* last */ +#define TD_TC 0x0400 /* transmit CRC */ +#define TD_CNF 0x0200 /* CNF - Must be always 1 */ +#define TD_LSP 0x0100 /* Low-speed transaction */ +#define TD_PID 0x00c0 /* packet id */ +#define TD_RXER 0x0020 /* Rx error or not */ + +#define TD_NAK 0x0010 /* No ack. */ +#define TD_STAL 0x0008 /* Stall recieved */ +#define TD_TO 0x0004 /* time out */ +#define TD_UN 0x0002 /* underrun */ +#define TD_NO 0x0010 /* Rx Non Octet Aligned Packet */ +#define TD_AB 0x0008 /* Frame Aborted */ +#define TD_CR 0x0004 /* CRC Error */ +#define TD_OV 0x0002 /* Overrun */ +#define TD_BOV 0x0001 /* Buffer Overrun */ + +#define TD_ERRORS (TD_NAK | TD_STAL | TD_TO | TD_UN | \ + TD_NO | TD_AB | TD_CR | TD_OV | TD_BOV) + +#define TD_PID_DATA0 0x0080 /* Data 0 toggle */ +#define TD_PID_DATA1 0x00c0 /* Data 1 toggle */ +#define TD_PID_TOGGLE 0x00c0 /* Data 0/1 toggle mask */ + +#define TD_TOK_SETUP 0x0000 +#define TD_TOK_OUT 0x4000 +#define TD_TOK_IN 0x8000 +#define TD_ISO 0x1000 +#define TD_ENDP 0x0780 +#define TD_ADDR 0x007f + +#define TD_ENDP_SHIFT 7 + +struct usb_td { + __be16 status; + __be16 length; + __be32 buf_ptr; + __be16 extra; + __be16 reserved; +}; + +static struct usb_td __iomem *next_bd(struct usb_td __iomem *base, + struct usb_td __iomem *td, + u16 status) +{ + if (status & TD_W) + return base; + else + return ++td; +} + +void fhci_push_dummy_bd(struct endpoint *ep) +{ + if (ep->already_pushed_dummy_bd == false) { + u16 td_status = in_be16(&ep->empty_td->status); + + out_be32(&ep->empty_td->buf_ptr, DUMMY_BD_BUFFER); + /* get the next TD in the ring */ + ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status); + ep->already_pushed_dummy_bd = true; + } +} + +/* destroy an USB endpoint */ +void fhci_ep0_free(struct fhci_usb *usb) +{ + struct endpoint *ep; + int size; + + ep = usb->ep0; + if (ep) { + if (ep->td_base) + cpm_muram_free(cpm_muram_offset(ep->td_base)); + + if (ep->conf_frame_Q) { + size = cq_howmany(ep->conf_frame_Q); + for (; size; size--) { + struct packet *pkt = cq_get(ep->conf_frame_Q); + + kfree(pkt); + } + cq_delete(ep->conf_frame_Q); + } + + if (ep->empty_frame_Q) { + size = cq_howmany(ep->empty_frame_Q); + for (; size; size--) { + struct packet *pkt = cq_get(ep->empty_frame_Q); + + kfree(pkt); + } + cq_delete(ep->empty_frame_Q); + } + + if (ep->dummy_packets_Q) { + size = cq_howmany(ep->dummy_packets_Q); + for (; size; size--) { + u8 *buff = cq_get(ep->dummy_packets_Q); + + kfree(buff); + } + cq_delete(ep->dummy_packets_Q); + } + + kfree(ep); + usb->ep0 = NULL; + } +} + +/* + * create the endpoint structure + * + * arguments: + * usb A pointer to the data structure of the USB + * data_mem The data memory partition(BUS) + * ring_len TD ring length + */ +u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem, + u32 ring_len) +{ + struct endpoint *ep; + struct usb_td __iomem *td; + unsigned long ep_offset; + char *err_for = "enpoint PRAM"; + int ep_mem_size; + u32 i; + + /* we need at least 3 TDs in the ring */ + if (!(ring_len > 2)) { + fhci_err(usb->fhci, "illegal TD ring length parameters\n"); + return -EINVAL; + } + + ep = kzalloc(sizeof(*ep), GFP_KERNEL); + if (!ep) + return -ENOMEM; + + ep_mem_size = ring_len * sizeof(*td) + sizeof(struct fhci_ep_pram); + ep_offset = cpm_muram_alloc(ep_mem_size, 32); + if (IS_ERR_VALUE(ep_offset)) + goto err; + ep->td_base = cpm_muram_addr(ep_offset); + + /* zero all queue pointers */ + ep->conf_frame_Q = cq_new(ring_len + 2); + ep->empty_frame_Q = cq_new(ring_len + 2); + ep->dummy_packets_Q = cq_new(ring_len + 2); + if (!ep->conf_frame_Q || !ep->empty_frame_Q || !ep->dummy_packets_Q) { + err_for = "frame_queues"; + goto err; + } + + for (i = 0; i < (ring_len + 1); i++) { + struct packet *pkt; + u8 *buff; + + pkt = kmalloc(sizeof(*pkt), GFP_KERNEL); + if (!pkt) { + err_for = "frame"; + goto err; + } + + buff = kmalloc(1028 * sizeof(*buff), GFP_KERNEL); + if (!buff) { + kfree(pkt); + err_for = "buffer"; + goto err; + } + cq_put(ep->empty_frame_Q, pkt); + cq_put(ep->dummy_packets_Q, buff); + } + + /* we put the endpoint parameter RAM right behind the TD ring */ + ep->ep_pram_ptr = (void __iomem *)ep->td_base + sizeof(*td) * ring_len; + + ep->conf_td = ep->td_base; + ep->empty_td = ep->td_base; + + ep->already_pushed_dummy_bd = false; + + /* initialize tds */ + td = ep->td_base; + for (i = 0; i < ring_len; i++) { + out_be32(&td->buf_ptr, 0); + out_be16(&td->status, 0); + out_be16(&td->length, 0); + out_be16(&td->extra, 0); + td++; + } + td--; + out_be16(&td->status, TD_W); /* for last TD set Wrap bit */ + out_be16(&td->length, 0); + + /* endpoint structure has been created */ + usb->ep0 = ep; + + return 0; +err: + fhci_ep0_free(usb); + kfree(ep); + fhci_err(usb->fhci, "no memory for the %s\n", err_for); + return -ENOMEM; +} + +/* + * initialize the endpoint register according to the given parameters + * + * artuments: + * usb A pointer to the data strucutre of the USB + * ep A pointer to the endpoint structre + * data_mem The data memory partition(BUS) + */ +void fhci_init_ep_registers(struct fhci_usb *usb, struct endpoint *ep, + enum fhci_mem_alloc data_mem) +{ + u8 rt; + + /* set the endpoint registers according to the endpoint */ + out_be16(&usb->fhci->regs->usb_ep[0], + USB_TRANS_CTR | USB_EP_MF | USB_EP_RTE); + out_be16(&usb->fhci->pram->ep_ptr[0], + cpm_muram_offset(ep->ep_pram_ptr)); + + rt = (BUS_MODE_BO_BE | BUS_MODE_GBL); +#ifdef MULTI_DATA_BUS + if (data_mem == MEM_SECONDARY) + rt |= BUS_MODE_DTB; +#endif + out_8(&ep->ep_pram_ptr->rx_func_code, rt); + out_8(&ep->ep_pram_ptr->tx_func_code, rt); + out_be16(&ep->ep_pram_ptr->rx_buff_len, 1028); + out_be16(&ep->ep_pram_ptr->rx_base, 0); + out_be16(&ep->ep_pram_ptr->tx_base, cpm_muram_offset(ep->td_base)); + out_be16(&ep->ep_pram_ptr->rx_bd_ptr, 0); + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, cpm_muram_offset(ep->td_base)); + out_be32(&ep->ep_pram_ptr->tx_state, 0); +} + +/* + * Collect the submitted frames and inform the application about them + * It is also prepearing the TDs for new frames. If the Tx interrupts + * are diabled, the application should call that routine to get + * confirmation about the submitted frames. Otherwise, the routine is + * called frome the interrupt service routine during the Tx interrupt. + * In that case the application is informed by calling the application + * specific 'fhci_transaction_confirm' routine + */ +static void fhci_td_transaction_confirm(struct fhci_usb *usb) +{ + struct endpoint *ep = usb->ep0; + struct packet *pkt; + struct usb_td __iomem *td; + u16 extra_data; + u16 td_status; + u16 td_length; + u32 buf; + + /* + * collect transmitted BDs from the chip. The routine clears all BDs + * with R bit = 0 and the pointer to data buffer is not NULL, that is + * BDs which point to the transmitted data buffer + */ + while (1) { + td = ep->conf_td; + td_status = in_be16(&td->status); + td_length = in_be16(&td->length); + buf = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + + /* check if the TD is empty */ + if (!(!(td_status & TD_R) && ((td_status & ~TD_W) || buf))) + break; + /* check if it is a dummy buffer */ + else if ((buf == DUMMY_BD_BUFFER) && !(td_status & ~TD_W)) + break; + + /* mark TD as empty */ + clrbits16(&td->status, ~TD_W); + out_be16(&td->length, 0); + out_be32(&td->buf_ptr, 0); + out_be16(&td->extra, 0); + /* advance the TD pointer */ + ep->conf_td = next_bd(ep->td_base, ep->conf_td, td_status); + + /* check if it is a dummy buffer(type2) */ + if ((buf == DUMMY2_BD_BUFFER) && !(td_status & ~TD_W)) + continue; + + pkt = cq_get(ep->conf_frame_Q); + if (!pkt) + fhci_err(usb->fhci, "no frame to confirm\n"); + + if (td_status & TD_ERRORS) { + if (td_status & TD_RXER) { + if (td_status & TD_CR) + pkt->status = USB_TD_RX_ER_CRC; + else if (td_status & TD_AB) + pkt->status = USB_TD_RX_ER_BITSTUFF; + else if (td_status & TD_OV) + pkt->status = USB_TD_RX_ER_OVERUN; + else if (td_status & TD_BOV) + pkt->status = USB_TD_RX_DATA_OVERUN; + else if (td_status & TD_NO) + pkt->status = USB_TD_RX_ER_NONOCT; + else + fhci_err(usb->fhci, "illegal error " + "occured\n"); + } else if (td_status & TD_NAK) + pkt->status = USB_TD_TX_ER_NAK; + else if (td_status & TD_TO) + pkt->status = USB_TD_TX_ER_TIMEOUT; + else if (td_status & TD_UN) + pkt->status = USB_TD_TX_ER_UNDERUN; + else if (td_status & TD_STAL) + pkt->status = USB_TD_TX_ER_STALL; + else + fhci_err(usb->fhci, "illegal error occured\n"); + } else if ((extra_data & TD_TOK_IN) && + pkt->len > td_length - CRC_SIZE) { + pkt->status = USB_TD_RX_DATA_UNDERUN; + } + + if (extra_data & TD_TOK_IN) + pkt->len = td_length - CRC_SIZE; + else if (pkt->info & PKT_ZLP) + pkt->len = 0; + else + pkt->len = td_length; + + fhci_transaction_confirm(usb, pkt); + } +} + +/* + * Submitting a data frame to a specified endpoint of a USB device + * The frame is put in the driver's transmit queue for this endpoint + * + * Arguments: + * usb A pointer to the USB structure + * pkt A pointer to the user frame structure + * trans_type Transaction tyep - IN,OUT or SETUP + * dest_addr Device address - 0~127 + * dest_ep Endpoint number of the device - 0~16 + * trans_mode Pipe type - ISO,Interrupt,bulk or control + * dest_speed USB speed - Low speed or FULL speed + * data_toggle Data sequence toggle - 0 or 1 + */ +u32 fhci_host_transaction(struct fhci_usb *usb, + struct packet *pkt, + enum fhci_ta_type trans_type, + u8 dest_addr, + u8 dest_ep, + enum fhci_tf_mode trans_mode, + enum fhci_speed dest_speed, u8 data_toggle) +{ + struct endpoint *ep = usb->ep0; + struct usb_td __iomem *td; + u16 extra_data; + u16 td_status; + + fhci_usb_disable_interrupt(usb); + /* start from the next BD that should be filled */ + td = ep->empty_td; + td_status = in_be16(&td->status); + + if (td_status & TD_R && in_be16(&td->length)) { + /* if the TD is not free */ + fhci_usb_enable_interrupt(usb); + return -1; + } + + /* get the next TD in the ring */ + ep->empty_td = next_bd(ep->td_base, ep->empty_td, td_status); + fhci_usb_enable_interrupt(usb); + pkt->priv_data = td; + out_be32(&td->buf_ptr, virt_to_phys(pkt->data)); + /* sets up transaction parameters - addr,endp,dir,and type */ + extra_data = (dest_ep << TD_ENDP_SHIFT) | dest_addr; + switch (trans_type) { + case FHCI_TA_IN: + extra_data |= TD_TOK_IN; + break; + case FHCI_TA_OUT: + extra_data |= TD_TOK_OUT; + break; + case FHCI_TA_SETUP: + extra_data |= TD_TOK_SETUP; + break; + } + if (trans_mode == FHCI_TF_ISO) + extra_data |= TD_ISO; + out_be16(&td->extra, extra_data); + + /* sets up the buffer descriptor */ + td_status = ((td_status & TD_W) | TD_R | TD_L | TD_I | TD_CNF); + if (!(pkt->info & PKT_NO_CRC)) + td_status |= TD_TC; + + switch (trans_type) { + case FHCI_TA_IN: + if (data_toggle) + pkt->info |= PKT_PID_DATA1; + else + pkt->info |= PKT_PID_DATA0; + break; + default: + if (data_toggle) { + td_status |= TD_PID_DATA1; + pkt->info |= PKT_PID_DATA1; + } else { + td_status |= TD_PID_DATA0; + pkt->info |= PKT_PID_DATA0; + } + break; + } + + if ((dest_speed == FHCI_LOW_SPEED) && + (usb->port_status == FHCI_PORT_FULL)) + td_status |= TD_LSP; + + out_be16(&td->status, td_status); + + /* set up buffer length */ + if (trans_type == FHCI_TA_IN) + out_be16(&td->length, pkt->len + CRC_SIZE); + else + out_be16(&td->length, pkt->len); + + /* put the frame to the confirmation queue */ + cq_put(ep->conf_frame_Q, pkt); + + if (cq_howmany(ep->conf_frame_Q) == 1) + out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO); + + return 0; +} + +/* Reset the Tx BD ring */ +void fhci_flush_bds(struct fhci_usb *usb) +{ + u16 extra_data; + u16 td_status; + u32 buf; + struct usb_td __iomem *td; + struct endpoint *ep = usb->ep0; + + td = ep->td_base; + while (1) { + td_status = in_be16(&td->status); + buf = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + + /* if the TD is not empty - we'll confirm it as Timeout */ + if (td_status & TD_R) + out_be16(&td->status, (td_status & ~TD_R) | TD_TO); + /* if this TD is dummy - let's skip this TD */ + else if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER) + out_be32(&td->buf_ptr, DUMMY2_BD_BUFFER); + /* if this is the last TD - break */ + if (td_status & TD_W) + break; + + td++; + } + + fhci_td_transaction_confirm(usb); + + td = ep->td_base; + do { + out_be16(&td->status, 0); + out_be16(&td->length, 0); + out_be32(&td->buf_ptr, 0); + out_be16(&td->extra, 0); + td++; + } while (!(in_be16(&td->status) & TD_W)); + out_be16(&td->status, TD_W); /* for last TD set Wrap bit */ + out_be16(&td->length, 0); + out_be32(&td->buf_ptr, 0); + out_be16(&td->extra, 0); + + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, + in_be16(&ep->ep_pram_ptr->tx_base)); + out_be32(&ep->ep_pram_ptr->tx_state, 0); + out_be16(&ep->ep_pram_ptr->tx_cnt, 0); + ep->empty_td = ep->td_base; + ep->conf_td = ep->td_base; +} + +/* + * Flush all transmitted packets from TDs in the actual frame. + * This routine is called when something wrong with the controller and + * we want to get rid of the actual frame and start again next frame + */ +void fhci_flush_actual_frame(struct fhci_usb *usb) +{ + u8 mode; + u16 tb_ptr; + u16 extra_data; + u16 td_status; + u32 buf_ptr; + struct usb_td __iomem *td; + struct endpoint *ep = usb->ep0; + + /* disable the USB controller */ + mode = in_8(&usb->fhci->regs->usb_mod); + out_8(&usb->fhci->regs->usb_mod, mode & ~USB_MODE_EN); + + tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr); + td = cpm_muram_addr(tb_ptr); + td_status = in_be16(&td->status); + buf_ptr = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + do { + if (td_status & TD_R) { + out_be16(&td->status, (td_status & ~TD_R) | TD_TO); + } else { + out_be32(&td->buf_ptr, 0); + ep->already_pushed_dummy_bd = false; + break; + } + + /* advance the TD pointer */ + td = next_bd(ep->td_base, td, td_status); + td_status = in_be16(&td->status); + buf_ptr = in_be32(&td->buf_ptr); + extra_data = in_be16(&td->extra); + } while ((td_status & TD_R) || buf_ptr); + + fhci_td_transaction_confirm(usb); + + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, + in_be16(&ep->ep_pram_ptr->tx_base)); + out_be32(&ep->ep_pram_ptr->tx_state, 0); + out_be16(&ep->ep_pram_ptr->tx_cnt, 0); + ep->empty_td = ep->td_base; + ep->conf_td = ep->td_base; + + usb->actual_frame->frame_status = FRAME_TIMER_END_TRANSMISSION; + + /* reset the event register */ + out_be16(&usb->fhci->regs->usb_event, 0xffff); + /* enable the USB controller */ + out_8(&usb->fhci->regs->usb_mod, mode | USB_MODE_EN); +} + +/* handles Tx confirm and Tx error interrupt */ +void fhci_tx_conf_interrupt(struct fhci_usb *usb) +{ + fhci_td_transaction_confirm(usb); + + /* + * Schedule another transaction to this frame only if we have + * already confirmed all transaction in the frame. + */ + if (((fhci_get_sof_timer_count(usb) < usb->max_frame_usage) || + (usb->actual_frame->frame_status & FRAME_END_TRANSMISSION)) && + (list_empty(&usb->actual_frame->tds_list))) + fhci_schedule_transactions(usb); +} + +void fhci_host_transmit_actual_frame(struct fhci_usb *usb) +{ + u16 tb_ptr; + u16 td_status; + struct usb_td __iomem *td; + struct endpoint *ep = usb->ep0; + + tb_ptr = in_be16(&ep->ep_pram_ptr->tx_bd_ptr); + td = cpm_muram_addr(tb_ptr); + + if (in_be32(&td->buf_ptr) == DUMMY_BD_BUFFER) { + struct usb_td __iomem *old_td = td; + + ep->already_pushed_dummy_bd = false; + td_status = in_be16(&td->status); + /* gets the next TD in the ring */ + td = next_bd(ep->td_base, td, td_status); + tb_ptr = cpm_muram_offset(td); + out_be16(&ep->ep_pram_ptr->tx_bd_ptr, tb_ptr); + + /* start transmit only if we have something in the TDs */ + if (in_be16(&td->status) & TD_R) + out_8(&usb->fhci->regs->usb_comm, USB_CMD_STR_FIFO); + + if (in_be32(&ep->conf_td->buf_ptr) == DUMMY_BD_BUFFER) { + out_be32(&old_td->buf_ptr, 0); + ep->conf_td = next_bd(ep->td_base, ep->conf_td, + td_status); + } else { + out_be32(&old_td->buf_ptr, DUMMY2_BD_BUFFER); + } + } +} diff --git a/drivers/usb/host/fhci.h b/drivers/usb/host/fhci.h new file mode 100644 index 00000000000..7116284ed21 --- /dev/null +++ b/drivers/usb/host/fhci.h @@ -0,0 +1,607 @@ +/* + * Freescale QUICC Engine USB Host Controller Driver + * + * Copyright (c) Freescale Semicondutor, Inc. 2006. + * Shlomi Gridish <gridish@freescale.com> + * Jerry Huang <Chang-Ming.Huang@freescale.com> + * Copyright (c) Logic Product Development, Inc. 2007 + * Peter Barada <peterb@logicpd.com> + * Copyright (c) MontaVista Software, Inc. 2008. + * Anton Vorontsov <avorontsov@ru.mvista.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#ifndef __FHCI_H +#define __FHCI_H + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/spinlock.h> +#include <linux/interrupt.h> +#include <linux/kfifo.h> +#include <linux/io.h> +#include <linux/usb.h> +#include <asm/qe.h> +#include "../core/hcd.h" + +#define USB_CLOCK 48000000 + +#define FHCI_PRAM_SIZE 0x100 + +#define MAX_EDS 32 +#define MAX_TDS 32 + + +/* CRC16 field size */ +#define CRC_SIZE 2 + +/* USB protocol overhead for each frame transmitted from the host */ +#define PROTOCOL_OVERHEAD 7 + +/* Packet structure, info field */ +#define PKT_PID_DATA0 0x80000000 /* PID - Data toggle zero */ +#define PKT_PID_DATA1 0x40000000 /* PID - Data toggle one */ +#define PKT_PID_SETUP 0x20000000 /* PID - Setup bit */ +#define PKT_SETUP_STATUS 0x10000000 /* Setup status bit */ +#define PKT_SETADDR_STATUS 0x08000000 /* Set address status bit */ +#define PKT_SET_HOST_LAST 0x04000000 /* Last data packet */ +#define PKT_HOST_DATA 0x02000000 /* Data packet */ +#define PKT_FIRST_IN_FRAME 0x01000000 /* First packet in the frame */ +#define PKT_TOKEN_FRAME 0x00800000 /* Token packet */ +#define PKT_ZLP 0x00400000 /* Zero length packet */ +#define PKT_IN_TOKEN_FRAME 0x00200000 /* IN token packet */ +#define PKT_OUT_TOKEN_FRAME 0x00100000 /* OUT token packet */ +#define PKT_SETUP_TOKEN_FRAME 0x00080000 /* SETUP token packet */ +#define PKT_STALL_FRAME 0x00040000 /* STALL packet */ +#define PKT_NACK_FRAME 0x00020000 /* NACK packet */ +#define PKT_NO_PID 0x00010000 /* No PID */ +#define PKT_NO_CRC 0x00008000 /* don't append CRC */ +#define PKT_HOST_COMMAND 0x00004000 /* Host command packet */ +#define PKT_DUMMY_PACKET 0x00002000 /* Dummy packet, used for mmm */ +#define PKT_LOW_SPEED_PACKET 0x00001000 /* Low-Speed packet */ + +#define TRANS_OK (0) +#define TRANS_INPROGRESS (-1) +#define TRANS_DISCARD (-2) +#define TRANS_FAIL (-3) + +#define PS_INT 0 +#define PS_DISCONNECTED 1 +#define PS_CONNECTED 2 +#define PS_READY 3 +#define PS_MISSING 4 + +/* Transfer Descriptor status field */ +#define USB_TD_OK 0x00000000 /* TD transmited or received ok */ +#define USB_TD_INPROGRESS 0x80000000 /* TD is being transmitted */ +#define USB_TD_RX_ER_NONOCT 0x40000000 /* Tx Non Octet Aligned Packet */ +#define USB_TD_RX_ER_BITSTUFF 0x20000000 /* Frame Aborted-Received pkt */ +#define USB_TD_RX_ER_CRC 0x10000000 /* CRC error */ +#define USB_TD_RX_ER_OVERUN 0x08000000 /* Over - run occured */ +#define USB_TD_RX_ER_PID 0x04000000 /* wrong PID received */ +#define USB_TD_RX_DATA_UNDERUN 0x02000000 /* shorter than expected */ +#define USB_TD_RX_DATA_OVERUN 0x01000000 /* longer than expected */ +#define USB_TD_TX_ER_NAK 0x00800000 /* NAK handshake */ +#define USB_TD_TX_ER_STALL 0x00400000 /* STALL handshake */ +#define USB_TD_TX_ER_TIMEOUT 0x00200000 /* transmit time out */ +#define USB_TD_TX_ER_UNDERUN 0x00100000 /* transmit underrun */ + +#define USB_TD_ERROR (USB_TD_RX_ER_NONOCT | USB_TD_RX_ER_BITSTUFF | \ + USB_TD_RX_ER_CRC | USB_TD_RX_ER_OVERUN | USB_TD_RX_ER_PID | \ + USB_TD_RX_DATA_UNDERUN | USB_TD_RX_DATA_OVERUN | \ + USB_TD_TX_ER_NAK | USB_TD_TX_ER_STALL | \ + USB_TD_TX_ER_TIMEOUT | USB_TD_TX_ER_UNDERUN) + +/* Transfer Descriptor toggle field */ +#define USB_TD_TOGGLE_DATA0 0 +#define USB_TD_TOGGLE_DATA1 1 +#define USB_TD_TOGGLE_CARRY 2 + +/* #define MULTI_DATA_BUS */ + +/* Bus mode register RBMR/TBMR */ +#define BUS_MODE_GBL 0x20 /* Global snooping */ +#define BUS_MODE_BO 0x18 /* Byte ordering */ +#define BUS_MODE_BO_BE 0x10 /* Byte ordering - Big-endian */ +#define BUS_MODE_DTB 0x02 /* Data bus */ + +/* FHCI QE USB Register Description */ + +/* USB Mode Register bit define */ +#define USB_MODE_EN 0x01 +#define USB_MODE_HOST 0x02 +#define USB_MODE_TEST 0x04 +#define USB_MODE_SFTE 0x08 +#define USB_MODE_RESUME 0x40 +#define USB_MODE_LSS 0x80 + +/* USB Slave Address Register Mask */ +#define USB_SLVADDR_MASK 0x7F + +/* USB Endpoint register define */ +#define USB_EPNUM_MASK 0xF000 +#define USB_EPNUM_SHIFT 12 + +#define USB_TRANS_MODE_SHIFT 8 +#define USB_TRANS_CTR 0x0000 +#define USB_TRANS_INT 0x0100 +#define USB_TRANS_BULK 0x0200 +#define USB_TRANS_ISO 0x0300 + +#define USB_EP_MF 0x0020 +#define USB_EP_RTE 0x0010 + +#define USB_THS_SHIFT 2 +#define USB_THS_MASK 0x000c +#define USB_THS_NORMAL 0x0 +#define USB_THS_IGNORE_IN 0x0004 +#define USB_THS_NACK 0x0008 +#define USB_THS_STALL 0x000c + +#define USB_RHS_SHIFT 0 +#define USB_RHS_MASK 0x0003 +#define USB_RHS_NORMAL 0x0 +#define USB_RHS_IGNORE_OUT 0x0001 +#define USB_RHS_NACK 0x0002 +#define USB_RHS_STALL 0x0003 + +#define USB_RTHS_MASK 0x000f + +/* USB Command Register define */ +#define USB_CMD_STR_FIFO 0x80 +#define USB_CMD_FLUSH_FIFO 0x40 +#define USB_CMD_ISFT 0x20 +#define USB_CMD_DSFT 0x10 +#define USB_CMD_EP_MASK 0x03 + +/* USB Event and Mask Register define */ +#define USB_E_MSF_MASK 0x0800 +#define USB_E_SFT_MASK 0x0400 +#define USB_E_RESET_MASK 0x0200 +#define USB_E_IDLE_MASK 0x0100 +#define USB_E_TXE4_MASK 0x0080 +#define USB_E_TXE3_MASK 0x0040 +#define USB_E_TXE2_MASK 0x0020 +#define USB_E_TXE1_MASK 0x0010 +#define USB_E_SOF_MASK 0x0008 +#define USB_E_BSY_MASK 0x0004 +#define USB_E_TXB_MASK 0x0002 +#define USB_E_RXB_MASK 0x0001 + +/* Freescale USB Host controller registers */ +struct fhci_regs { + u8 usb_mod; /* mode register */ + u8 usb_addr; /* address register */ + u8 usb_comm; /* command register */ + u8 reserved1[1]; + __be16 usb_ep[4]; /* endpoint register */ + u8 reserved2[4]; + __be16 usb_event; /* event register */ + u8 reserved3[2]; + __be16 usb_mask; /* mask register */ + u8 reserved4[1]; + u8 usb_status; /* status register */ + __be16 usb_sof_tmr; /* Start Of Frame timer */ + u8 reserved5[2]; + __be16 usb_frame_num; /* frame number register */ + u8 reserved6[1]; +}; + +/* Freescale USB HOST */ +struct fhci_pram { + __be16 ep_ptr[4]; /* Endpoint porter reg */ + __be32 rx_state; /* Rx internal state */ + __be32 rx_ptr; /* Rx internal data pointer */ + __be16 frame_num; /* Frame number */ + __be16 rx_cnt; /* Rx byte count */ + __be32 rx_temp; /* Rx temp */ + __be32 rx_data_temp; /* Rx data temp */ + __be16 rx_u_ptr; /* Rx microcode return address temp */ + u8 reserved1[2]; /* reserved area */ + __be32 sof_tbl; /* SOF lookup table pointer */ + u8 sof_u_crc_temp; /* SOF micorcode CRC5 temp reg */ + u8 reserved2[0xdb]; +}; + +/* Freescale USB Endpoint*/ +struct fhci_ep_pram { + __be16 rx_base; /* Rx BD base address */ + __be16 tx_base; /* Tx BD base address */ + u8 rx_func_code; /* Rx function code */ + u8 tx_func_code; /* Tx function code */ + __be16 rx_buff_len; /* Rx buffer length */ + __be16 rx_bd_ptr; /* Rx BD pointer */ + __be16 tx_bd_ptr; /* Tx BD pointer */ + __be32 tx_state; /* Tx internal state */ + __be32 tx_ptr; /* Tx internal data pointer */ + __be16 tx_crc; /* temp transmit CRC */ + __be16 tx_cnt; /* Tx byte count */ + __be32 tx_temp; /* Tx temp */ + __be16 tx_u_ptr; /* Tx microcode return address temp */ + __be16 reserved; +}; + +struct fhci_controller_list { + struct list_head ctrl_list; /* control endpoints */ + struct list_head bulk_list; /* bulk endpoints */ + struct list_head iso_list; /* isochronous endpoints */ + struct list_head intr_list; /* interruput endpoints */ + struct list_head done_list; /* done transfers */ +}; + +struct virtual_root_hub { + int dev_num; /* USB address of the root hub */ + u32 feature; /* indicates what feature has been set */ + struct usb_hub_status hub; + struct usb_port_status port; +}; + +enum fhci_gpios { + GPIO_USBOE = 0, + GPIO_USBTP, + GPIO_USBTN, + GPIO_USBRP, + GPIO_USBRN, + /* these are optional */ + GPIO_SPEED, + GPIO_POWER, + NUM_GPIOS, +}; + +enum fhci_pins { + PIN_USBOE = 0, + PIN_USBTP, + PIN_USBTN, + NUM_PINS, +}; + +struct fhci_hcd { + enum qe_clock fullspeed_clk; + enum qe_clock lowspeed_clk; + struct qe_pin *pins[NUM_PINS]; + int gpios[NUM_GPIOS]; + bool alow_gpios[NUM_GPIOS]; + + struct fhci_regs __iomem *regs; /* I/O memory used to communicate */ + struct fhci_pram __iomem *pram; /* Parameter RAM */ + struct gtm_timer *timer; + + spinlock_t lock; + struct fhci_usb *usb_lld; /* Low-level driver */ + struct virtual_root_hub *vroot_hub; /* the virtual root hub */ + int active_urbs; + struct fhci_controller_list *hc_list; + struct tasklet_struct *process_done_task; /* tasklet for done list */ + + struct list_head empty_eds; + struct list_head empty_tds; + +#ifdef CONFIG_FHCI_DEBUG + int usb_irq_stat[13]; + struct dentry *dfs_root; + struct dentry *dfs_regs; + struct dentry *dfs_irq_stat; +#endif +}; + +#define USB_FRAME_USAGE 90 +#define FRAME_TIME_USAGE (USB_FRAME_USAGE*10) /* frame time usage */ +#define SW_FIX_TIME_BETWEEN_TRANSACTION 150 /* SW */ +#define MAX_BYTES_PER_FRAME (USB_FRAME_USAGE*15) +#define MAX_PERIODIC_FRAME_USAGE 90 + +/* transaction type */ +enum fhci_ta_type { + FHCI_TA_IN = 0, /* input transaction */ + FHCI_TA_OUT, /* output transaction */ + FHCI_TA_SETUP, /* setup transaction */ +}; + +/* transfer mode */ +enum fhci_tf_mode { + FHCI_TF_CTRL = 0, + FHCI_TF_ISO, + FHCI_TF_BULK, + FHCI_TF_INTR, +}; + +enum fhci_speed { + FHCI_FULL_SPEED, + FHCI_LOW_SPEED, +}; + +/* endpoint state */ +enum fhci_ed_state { + FHCI_ED_NEW = 0, /* pipe is new */ + FHCI_ED_OPER, /* pipe is operating */ + FHCI_ED_URB_DEL, /* pipe is in hold because urb is being deleted */ + FHCI_ED_SKIP, /* skip this pipe */ + FHCI_ED_HALTED, /* pipe is halted */ +}; + +enum fhci_port_status { + FHCI_PORT_POWER_OFF = 0, + FHCI_PORT_DISABLED, + FHCI_PORT_DISCONNECTING, + FHCI_PORT_WAITING, /* waiting for connection */ + FHCI_PORT_FULL, /* full speed connected */ + FHCI_PORT_LOW, /* low speed connected */ +}; + +enum fhci_mem_alloc { + MEM_CACHABLE_SYS = 0x00000001, /* primary DDR,cachable */ + MEM_NOCACHE_SYS = 0x00000004, /* primary DDR,non-cachable */ + MEM_SECONDARY = 0x00000002, /* either secondary DDR or SDRAM */ + MEM_PRAM = 0x00000008, /* multi-user RAM identifier */ +}; + +/* USB default parameters*/ +#define DEFAULT_RING_LEN 8 +#define DEFAULT_DATA_MEM MEM_CACHABLE_SYS + +struct ed { + u8 dev_addr; /* device address */ + u8 ep_addr; /* endpoint address */ + enum fhci_tf_mode mode; /* USB transfer mode */ + enum fhci_speed speed; + unsigned int max_pkt_size; + enum fhci_ed_state state; + struct list_head td_list; /* a list of all queued TD to this pipe */ + struct list_head node; + + /* read only parameters, should be cleared upon initialization */ + u8 toggle_carry; /* toggle carry from the last TD submitted */ + u32 last_iso; /* time stamp of last queued ISO transfer */ + struct td *td_head; /* a pointer to the current TD handled */ +}; + +struct td { + void *data; /* a pointer to the data buffer */ + unsigned int len; /* length of the data to be submitted */ + unsigned int actual_len; /* actual bytes transfered on this td */ + enum fhci_ta_type type; /* transaction type */ + u8 toggle; /* toggle for next trans. within this TD */ + u16 iso_index; /* ISO transaction index */ + u16 start_frame; /* start frame time stamp */ + u16 interval; /* interval between trans. (for ISO/Intr) */ + u32 status; /* status of the TD */ + struct ed *ed; /* a handle to the corresponding ED */ + struct urb *urb; /* a handle to the corresponding URB */ + bool ioc; /* Inform On Completion */ + struct list_head node; + + /* read only parameters should be cleared upon initialization */ + struct packet *pkt; + int nak_cnt; + int error_cnt; + struct list_head frame_lh; +}; + +struct packet { + u8 *data; /* packet data */ + u32 len; /* packet length */ + u32 status; /* status of the packet - equivalent to the status + * field for the corresponding structure td */ + u32 info; /* packet information */ + void __iomem *priv_data; /* private data of the driver (TDs or BDs) */ +}; + +/* struct for each URB */ +#define URB_INPROGRESS 0 +#define URB_DEL 1 + +/* URB states (state field) */ +#define US_BULK 0 +#define US_BULK0 1 + +/* three setup states */ +#define US_CTRL_SETUP 2 +#define US_CTRL_DATA 1 +#define US_CTRL_ACK 0 + +#define EP_ZERO 0 + +struct urb_priv { + int num_of_tds; + int tds_cnt; + int state; + + struct td **tds; + struct ed *ed; + struct timer_list time_out; +}; + +struct endpoint { + /* Pointer to ep parameter RAM */ + struct fhci_ep_pram __iomem *ep_pram_ptr; + + /* Host transactions */ + struct usb_td __iomem *td_base; /* first TD in the ring */ + struct usb_td __iomem *conf_td; /* next TD for confirm after transac */ + struct usb_td __iomem *empty_td;/* next TD for new transaction req. */ + struct kfifo *empty_frame_Q; /* Empty frames list to use */ + struct kfifo *conf_frame_Q; /* frames passed to TDs,waiting for tx */ + struct kfifo *dummy_packets_Q;/* dummy packets for the CRC overun */ + + bool already_pushed_dummy_bd; +}; + +/* struct for each 1mSec frame time */ +#define FRAME_IS_TRANSMITTED 0x00 +#define FRAME_TIMER_END_TRANSMISSION 0x01 +#define FRAME_DATA_END_TRANSMISSION 0x02 +#define FRAME_END_TRANSMISSION 0x03 +#define FRAME_IS_PREPARED 0x04 + +struct fhci_time_frame { + u16 frame_num; /* frame number */ + u16 total_bytes; /* total bytes submitted within this frame */ + u8 frame_status; /* flag that indicates to stop fill this frame */ + struct list_head tds_list; /* all tds of this frame */ +}; + +/* internal driver structure*/ +struct fhci_usb { + u16 saved_msk; /* saving of the USB mask register */ + struct endpoint *ep0; /* pointer for endpoint0 structure */ + int intr_nesting_cnt; /* interrupt nesting counter */ + u16 max_frame_usage; /* max frame time usage,in micro-sec */ + u16 max_bytes_per_frame; /* max byte can be tx in one time frame */ + u32 sw_transaction_time; /* sw complete trans time,in micro-sec */ + struct fhci_time_frame *actual_frame; + struct fhci_controller_list *hc_list; /* main structure for hc */ + struct virtual_root_hub *vroot_hub; + enum fhci_port_status port_status; /* v_rh port status */ + + u32 (*transfer_confirm)(struct fhci_hcd *fhci); + + struct fhci_hcd *fhci; +}; + +/* + * Various helpers and prototypes below. + */ + +static inline u16 get_frame_num(struct fhci_hcd *fhci) +{ + return in_be16(&fhci->pram->frame_num) & 0x07ff; +} + +#define fhci_dbg(fhci, fmt, args...) \ + dev_dbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_vdbg(fhci, fmt, args...) \ + dev_vdbg(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_err(fhci, fmt, args...) \ + dev_err(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_info(fhci, fmt, args...) \ + dev_info(fhci_to_hcd(fhci)->self.controller, fmt, ##args) +#define fhci_warn(fhci, fmt, args...) \ + dev_warn(fhci_to_hcd(fhci)->self.controller, fmt, ##args) + +static inline struct fhci_hcd *hcd_to_fhci(struct usb_hcd *hcd) +{ + return (struct fhci_hcd *)hcd->hcd_priv; +} + +static inline struct usb_hcd *fhci_to_hcd(struct fhci_hcd *fhci) +{ + return container_of((void *)fhci, struct usb_hcd, hcd_priv); +} + +/* fifo of pointers */ +static inline struct kfifo *cq_new(int size) +{ + return kfifo_alloc(size * sizeof(void *), GFP_KERNEL, NULL); +} + +static inline void cq_delete(struct kfifo *kfifo) +{ + kfifo_free(kfifo); +} + +static inline unsigned int cq_howmany(struct kfifo *kfifo) +{ + return __kfifo_len(kfifo) / sizeof(void *); +} + +static inline int cq_put(struct kfifo *kfifo, void *p) +{ + return __kfifo_put(kfifo, (void *)&p, sizeof(p)); +} + +static inline void *cq_get(struct kfifo *kfifo) +{ + void *p = NULL; + + __kfifo_get(kfifo, (void *)&p, sizeof(p)); + return p; +} + +/* fhci-hcd.c */ +void fhci_start_sof_timer(struct fhci_hcd *fhci); +void fhci_stop_sof_timer(struct fhci_hcd *fhci); +u16 fhci_get_sof_timer_count(struct fhci_usb *usb); +void fhci_usb_enable_interrupt(struct fhci_usb *usb); +void fhci_usb_disable_interrupt(struct fhci_usb *usb); +int fhci_ioports_check_bus_state(struct fhci_hcd *fhci); + +/* fhci-mem.c */ +void fhci_recycle_empty_td(struct fhci_hcd *fhci, struct td *td); +void fhci_recycle_empty_ed(struct fhci_hcd *fhci, struct ed *ed); +struct ed *fhci_get_empty_ed(struct fhci_hcd *fhci); +struct td *fhci_td_fill(struct fhci_hcd *fhci, struct urb *urb, + struct urb_priv *urb_priv, struct ed *ed, u16 index, + enum fhci_ta_type type, int toggle, u8 *data, u32 len, + u16 interval, u16 start_frame, bool ioc); +void fhci_add_tds_to_ed(struct ed *ed, struct td **td_list, int number); + +/* fhci-hub.c */ +void fhci_config_transceiver(struct fhci_hcd *fhci, + enum fhci_port_status status); +void fhci_port_disable(struct fhci_hcd *fhci); +void fhci_port_enable(void *lld); +void fhci_io_port_generate_reset(struct fhci_hcd *fhci); +void fhci_port_reset(void *lld); +int fhci_hub_status_data(struct usb_hcd *hcd, char *buf); +int fhci_hub_control(struct usb_hcd *hcd, u16 typeReq, u16 wValue, + u16 wIndex, char *buf, u16 wLength); + +/* fhci-tds.c */ +void fhci_flush_bds(struct fhci_usb *usb); +void fhci_flush_actual_frame(struct fhci_usb *usb); +u32 fhci_host_transaction(struct fhci_usb *usb, struct packet *pkt, + enum fhci_ta_type trans_type, u8 dest_addr, + u8 dest_ep, enum fhci_tf_mode trans_mode, + enum fhci_speed dest_speed, u8 data_toggle); +void fhci_host_transmit_actual_frame(struct fhci_usb *usb); +void fhci_tx_conf_interrupt(struct fhci_usb *usb); +void fhci_push_dummy_bd(struct endpoint *ep); +u32 fhci_create_ep(struct fhci_usb *usb, enum fhci_mem_alloc data_mem, + u32 ring_len); +void fhci_init_ep_registers(struct fhci_usb *usb, + struct endpoint *ep, + enum fhci_mem_alloc data_mem); +void fhci_ep0_free(struct fhci_usb *usb); + +/* fhci-sched.c */ +extern struct tasklet_struct fhci_tasklet; +void fhci_transaction_confirm(struct fhci_usb *usb, struct packet *pkt); +void fhci_flush_all_transmissions(struct fhci_usb *usb); +void fhci_schedule_transactions(struct fhci_usb *usb); +void fhci_device_connected_interrupt(struct fhci_hcd *fhci); +void fhci_device_disconnected_interrupt(struct fhci_hcd *fhci); +void fhci_queue_urb(struct fhci_hcd *fhci, struct urb *urb); +u32 fhci_transfer_confirm_callback(struct fhci_hcd *fhci); +irqreturn_t fhci_irq(struct usb_hcd *hcd); +irqreturn_t fhci_frame_limit_timer_irq(int irq, void *_hcd); + +/* fhci-q.h */ +void fhci_urb_complete_free(struct fhci_hcd *fhci, struct urb *urb); +struct td *fhci_remove_td_from_ed(struct ed *ed); +struct td *fhci_remove_td_from_frame(struct fhci_time_frame *frame); +void fhci_move_td_from_ed_to_done_list(struct fhci_usb *usb, struct ed *ed); +struct td *fhci_peek_td_from_frame(struct fhci_time_frame *frame); +void fhci_add_td_to_frame(struct fhci_time_frame *frame, struct td *td); +struct td *fhci_remove_td_from_done_list(struct fhci_controller_list *p_list); +void fhci_done_td(struct urb *urb, struct td *td); +void fhci_del_ed_list(struct fhci_hcd *fhci, struct ed *ed); + +#ifdef CONFIG_FHCI_DEBUG + +void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er); +void fhci_dfs_destroy(struct fhci_hcd *fhci); +void fhci_dfs_create(struct fhci_hcd *fhci); + +#else + +static inline void fhci_dbg_isr(struct fhci_hcd *fhci, int usb_er) {} +static inline void fhci_dfs_destroy(struct fhci_hcd *fhci) {} +static inline void fhci_dfs_create(struct fhci_hcd *fhci) {} + +#endif /* CONFIG_FHCI_DEBUG */ + +#endif /* __FHCI_H */ diff --git a/drivers/usb/host/ohci-hcd.c b/drivers/usb/host/ohci-hcd.c index 65a9609f4ad..5cf5f1eca4f 100644 --- a/drivers/usb/host/ohci-hcd.c +++ b/drivers/usb/host/ohci-hcd.c @@ -593,12 +593,10 @@ static int ohci_run (struct ohci_hcd *ohci) * to be checked in case boot firmware (BIOS/SMM/...) has set up * wakeup in a way the bus isn't aware of (e.g., legacy PCI PM). * If the bus glue detected wakeup capability then it should - * already be enabled. Either way, if wakeup should be enabled - * but isn't, we'll enable it now. + * already be enabled; if so we'll just enable it again. */ - if ((ohci->hc_control & OHCI_CTRL_RWC) != 0 - && !device_can_wakeup(hcd->self.controller)) - device_init_wakeup(hcd->self.controller, 1); + if ((ohci->hc_control & OHCI_CTRL_RWC) != 0) + device_set_wakeup_capable(hcd->self.controller, 1); switch (ohci->hc_control & OHCI_CTRL_HCFS) { case OHCI_USB_OPER: diff --git a/drivers/usb/host/ohci-omap.c b/drivers/usb/host/ohci-omap.c index 4bbddb73abd..f3aaba35e91 100644 --- a/drivers/usb/host/ohci-omap.c +++ b/drivers/usb/host/ohci-omap.c @@ -315,14 +315,14 @@ static int usb_hcd_omap_probe (const struct hc_driver *driver, return -ENODEV; } - usb_host_ck = clk_get(0, "usb_hhc_ck"); + usb_host_ck = clk_get(&pdev->dev, "usb_hhc_ck"); if (IS_ERR(usb_host_ck)) return PTR_ERR(usb_host_ck); if (!cpu_is_omap15xx()) - usb_dc_ck = clk_get(0, "usb_dc_ck"); + usb_dc_ck = clk_get(&pdev->dev, "usb_dc_ck"); else - usb_dc_ck = clk_get(0, "lb_ck"); + usb_dc_ck = clk_get(&pdev->dev, "lb_ck"); if (IS_ERR(usb_dc_ck)) { clk_put(usb_host_ck); diff --git a/drivers/usb/host/ohci-pci.c b/drivers/usb/host/ohci-pci.c index 8b28ae7865b..5d625c3fd42 100644 --- a/drivers/usb/host/ohci-pci.c +++ b/drivers/usb/host/ohci-pci.c @@ -487,7 +487,6 @@ static struct pci_driver ohci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .suspend_late = usb_hcd_pci_suspend_late, .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif diff --git a/drivers/usb/host/uhci-hcd.c b/drivers/usb/host/uhci-hcd.c index 4e221060f58..944f7e0ca4d 100644 --- a/drivers/usb/host/uhci-hcd.c +++ b/drivers/usb/host/uhci-hcd.c @@ -942,7 +942,6 @@ static struct pci_driver uhci_pci_driver = { #ifdef CONFIG_PM .suspend = usb_hcd_pci_suspend, - .suspend_late = usb_hcd_pci_suspend_late, .resume_early = usb_hcd_pci_resume_early, .resume = usb_hcd_pci_resume, #endif /* PM */ diff --git a/drivers/usb/misc/ldusb.c b/drivers/usb/misc/ldusb.c index 189a9db0350..ad4fb15b5dc 100644 --- a/drivers/usb/misc/ldusb.c +++ b/drivers/usb/misc/ldusb.c @@ -57,7 +57,6 @@ #define USB_DEVICE_ID_LD_MACHINETEST 0x2040 /* USB Product ID of Machine Test System */ #define USB_VENDOR_ID_VERNIER 0x08f7 -#define USB_DEVICE_ID_VERNIER_LABPRO 0x0001 #define USB_DEVICE_ID_VERNIER_GOTEMP 0x0002 #define USB_DEVICE_ID_VERNIER_SKIP 0x0003 #define USB_DEVICE_ID_VERNIER_CYCLOPS 0x0004 @@ -85,7 +84,6 @@ static struct usb_device_id ld_usb_table [] = { { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_NETWORKANALYSER) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_POWERCONTROL) }, { USB_DEVICE(USB_VENDOR_ID_LD, USB_DEVICE_ID_LD_MACHINETEST) }, - { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_LABPRO) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_GOTEMP) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_SKIP) }, { USB_DEVICE(USB_VENDOR_ID_VERNIER, USB_DEVICE_ID_VERNIER_CYCLOPS) }, diff --git a/drivers/usb/mon/mon_bin.c b/drivers/usb/mon/mon_bin.c index e06810aef2d..4cf27c72423 100644 --- a/drivers/usb/mon/mon_bin.c +++ b/drivers/usb/mon/mon_bin.c @@ -37,6 +37,7 @@ #define MON_IOCX_GET _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get) #define MON_IOCX_MFETCH _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch) #define MON_IOCH_MFLUSH _IO(MON_IOC_MAGIC, 8) + #ifdef CONFIG_COMPAT #define MON_IOCX_GET32 _IOW(MON_IOC_MAGIC, 6, struct mon_bin_get32) #define MON_IOCX_MFETCH32 _IOWR(MON_IOC_MAGIC, 7, struct mon_bin_mfetch32) @@ -921,21 +922,6 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file, } break; -#ifdef CONFIG_COMPAT - case MON_IOCX_GET32: { - struct mon_bin_get32 getb; - - if (copy_from_user(&getb, (void __user *)arg, - sizeof(struct mon_bin_get32))) - return -EFAULT; - - ret = mon_bin_get_event(file, rp, - compat_ptr(getb.hdr32), compat_ptr(getb.data32), - getb.alloc32); - } - break; -#endif - case MON_IOCX_MFETCH: { struct mon_bin_mfetch mfetch; @@ -962,7 +948,57 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file, } break; + case MON_IOCG_STATS: { + struct mon_bin_stats __user *sp; + unsigned int nevents; + unsigned int ndropped; + + spin_lock_irqsave(&rp->b_lock, flags); + ndropped = rp->cnt_lost; + rp->cnt_lost = 0; + spin_unlock_irqrestore(&rp->b_lock, flags); + nevents = mon_bin_queued(rp); + + sp = (struct mon_bin_stats __user *)arg; + if (put_user(rp->cnt_lost, &sp->dropped)) + return -EFAULT; + if (put_user(nevents, &sp->queued)) + return -EFAULT; + + } + break; + + default: + return -ENOTTY; + } + + return ret; +} + #ifdef CONFIG_COMPAT +static long mon_bin_compat_ioctl(struct file *file, + unsigned int cmd, unsigned long arg) +{ + struct mon_reader_bin *rp = file->private_data; + int ret; + + switch (cmd) { + + case MON_IOCX_GET32: { + struct mon_bin_get32 getb; + + if (copy_from_user(&getb, (void __user *)arg, + sizeof(struct mon_bin_get32))) + return -EFAULT; + + ret = mon_bin_get_event(file, rp, + compat_ptr(getb.hdr32), compat_ptr(getb.data32), + getb.alloc32); + if (ret < 0) + return ret; + } + return 0; + case MON_IOCX_MFETCH32: { struct mon_bin_mfetch32 mfetch; @@ -986,37 +1022,25 @@ static int mon_bin_ioctl(struct inode *inode, struct file *file, return ret; if (put_user(ret, &uptr->nfetch32)) return -EFAULT; - ret = 0; } - break; -#endif - - case MON_IOCG_STATS: { - struct mon_bin_stats __user *sp; - unsigned int nevents; - unsigned int ndropped; - - spin_lock_irqsave(&rp->b_lock, flags); - ndropped = rp->cnt_lost; - rp->cnt_lost = 0; - spin_unlock_irqrestore(&rp->b_lock, flags); - nevents = mon_bin_queued(rp); + return 0; - sp = (struct mon_bin_stats __user *)arg; - if (put_user(rp->cnt_lost, &sp->dropped)) - return -EFAULT; - if (put_user(nevents, &sp->queued)) - return -EFAULT; + case MON_IOCG_STATS: + return mon_bin_ioctl(NULL, file, cmd, + (unsigned long) compat_ptr(arg)); - } - break; + case MON_IOCQ_URB_LEN: + case MON_IOCQ_RING_SIZE: + case MON_IOCT_RING_SIZE: + case MON_IOCH_MFLUSH: + return mon_bin_ioctl(NULL, file, cmd, arg); default: - return -ENOTTY; + ; } - - return ret; + return -ENOTTY; } +#endif /* CONFIG_COMPAT */ static unsigned int mon_bin_poll(struct file *file, struct poll_table_struct *wait) @@ -1094,6 +1118,9 @@ static const struct file_operations mon_fops_binary = { /* .write = mon_text_write, */ .poll = mon_bin_poll, .ioctl = mon_bin_ioctl, +#ifdef CONFIG_COMPAT + .compat_ioctl = mon_bin_compat_ioctl, +#endif .release = mon_bin_release, .mmap = mon_bin_mmap, }; diff --git a/drivers/usb/musb/Kconfig b/drivers/usb/musb/Kconfig index 5af7379cd9a..9985db08e7d 100644 --- a/drivers/usb/musb/Kconfig +++ b/drivers/usb/musb/Kconfig @@ -11,6 +11,7 @@ config USB_MUSB_HDRC depends on (USB || USB_GADGET) && HAVE_CLK depends on !SUPERH select TWL4030_USB if MACH_OMAP_3430SDP + select USB_OTG_UTILS tristate 'Inventra Highspeed Dual Role Controller (TI, ADI, ...)' help Say Y here if your system has a dual role high speed USB @@ -49,7 +50,7 @@ comment "OMAP 343x high speed USB support" depends on USB_MUSB_HDRC && ARCH_OMAP34XX comment "Blackfin high speed USB Support" - depends on USB_MUSB_HDRC && (BF54x && !BF544) || (BF52x && !BF522 && !BF523) + depends on USB_MUSB_HDRC && ((BF54x && !BF544) || (BF52x && !BF522 && !BF523)) config USB_TUSB6010 boolean "TUSB 6010 support" diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c index 5ad6d0893cb..569ef0fed0f 100644 --- a/drivers/usb/musb/cppi_dma.c +++ b/drivers/usb/musb/cppi_dma.c @@ -9,6 +9,7 @@ #include <linux/usb.h> #include "musb_core.h" +#include "musb_debug.h" #include "cppi_dma.h" @@ -423,6 +424,7 @@ cppi_rndis_update(struct cppi_channel *c, int is_rx, } } +#ifdef CONFIG_USB_MUSB_DEBUG static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd) { pr_debug("RXBD/%s %08x: " @@ -431,10 +433,11 @@ static void cppi_dump_rxbd(const char *tag, struct cppi_descriptor *bd) bd->hw_next, bd->hw_bufp, bd->hw_off_len, bd->hw_options); } +#endif static void cppi_dump_rxq(int level, const char *tag, struct cppi_channel *rx) { -#if MUSB_DEBUG > 0 +#ifdef CONFIG_USB_MUSB_DEBUG struct cppi_descriptor *bd; if (!_dbg_level(level)) @@ -881,12 +884,14 @@ cppi_next_rx_segment(struct musb *musb, struct cppi_channel *rx, int onepacket) bd->hw_options |= CPPI_SOP_SET; tail->hw_options |= CPPI_EOP_SET; - if (debug >= 5) { +#ifdef CONFIG_USB_MUSB_DEBUG + if (_dbg_level(5)) { struct cppi_descriptor *d; for (d = rx->head; d; d = d->next) cppi_dump_rxbd("S", d); } +#endif /* in case the preceding transfer left some state... */ tail = rx->last_processed; @@ -990,6 +995,7 @@ static int cppi_channel_program(struct dma_channel *ch, cppi_ch->offset = 0; cppi_ch->maxpacket = maxpacket; cppi_ch->buf_len = len; + cppi_ch->channel.actual_len = 0; /* TX channel? or RX? */ if (cppi_ch->transmit) diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 0d566dc5ce0..5a8fd5d57a1 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -32,9 +32,10 @@ #include <linux/io.h> #include <linux/gpio.h> -#include <mach/arch/hardware.h> -#include <mach/arch/memory.h> -#include <mach/arch/gpio.h> +#include <mach/hardware.h> +#include <mach/memory.h> +#include <mach/gpio.h> + #include <asm/mach-types.h> #include "musb_core.h" @@ -370,12 +371,6 @@ int musb_platform_set_mode(struct musb *musb, u8 mode) return -EIO; } -int musb_platform_set_mode(struct musb *musb, u8 mode) -{ - /* EVM can't do this (right?) */ - return -EIO; -} - int __init musb_platform_init(struct musb *musb) { void __iomem *tibase = musb->ctrl_base; diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 6c7faacfb53..2cc34fa05b7 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -1824,8 +1824,9 @@ static void musb_free(struct musb *musb) musb_gadget_cleanup(musb); #endif - if (musb->nIrq >= 0 && musb->irq_wake) { - disable_irq_wake(musb->nIrq); + if (musb->nIrq >= 0) { + if (musb->irq_wake) + disable_irq_wake(musb->nIrq); free_irq(musb->nIrq, musb); } if (is_dma_capable() && musb->dma_controller) { diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 6197daeab8f..4ea30538798 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -874,10 +874,10 @@ static int musb_gadget_enable(struct usb_ep *ep, status = -EBUSY; goto fail; } - musb_ep->type = desc->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + musb_ep->type = usb_endpoint_type(desc); /* check direction and (later) maxpacket size against endpoint */ - if ((desc->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK) != epnum) + if (usb_endpoint_num(desc) != epnum) goto fail; /* REVISIT this rules out high bandwidth periodic transfers */ @@ -890,7 +890,7 @@ static int musb_gadget_enable(struct usb_ep *ep, * packet size (or fail), set the mode, clear the fifo */ musb_ep_select(mbase, epnum); - if (desc->bEndpointAddress & USB_DIR_IN) { + if (usb_endpoint_dir_in(desc)) { u16 int_txe = musb_readw(mbase, MUSB_INTRTXE); if (hw_ep->is_shared_fifo) diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index 99fa6123487..a035ceccf95 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -1847,8 +1847,8 @@ static int musb_urb_enqueue( goto done; } - qh->epnum = epd->bEndpointAddress & USB_ENDPOINT_NUMBER_MASK; - qh->type = epd->bmAttributes & USB_ENDPOINT_XFERTYPE_MASK; + qh->epnum = usb_endpoint_num(epd); + qh->type = usb_endpoint_type(epd); /* NOTE: urb->dev->devnum is wrong during SET_ADDRESS */ qh->addr_reg = (u8) usb_pipedevice(urb->pipe); diff --git a/drivers/usb/musb/tusb6010_omap.c b/drivers/usb/musb/tusb6010_omap.c index 52f7f29cebd..7e073a0d7ac 100644 --- a/drivers/usb/musb/tusb6010_omap.c +++ b/drivers/usb/musb/tusb6010_omap.c @@ -15,8 +15,8 @@ #include <linux/usb.h> #include <linux/platform_device.h> #include <linux/dma-mapping.h> -#include <asm/arch/dma.h> -#include <asm/arch/mux.h> +#include <mach/dma.h> +#include <mach/mux.h> #include "musb_core.h" diff --git a/drivers/usb/otg/Kconfig b/drivers/usb/otg/Kconfig index 8e8dbdb9b39..ee55b449ffd 100644 --- a/drivers/usb/otg/Kconfig +++ b/drivers/usb/otg/Kconfig @@ -6,14 +6,14 @@ comment "OTG and related infrastructure" -if USB || USB_GADGET - config USB_OTG_UTILS bool help Select this to make sure the build includes objects from the OTG infrastructure directory. +if USB || USB_GADGET + # # USB Transceiver Drivers # diff --git a/drivers/usb/serial/cp2101.c b/drivers/usb/serial/cp2101.c index cfaf1f08553..027f4b7dde8 100644 --- a/drivers/usb/serial/cp2101.c +++ b/drivers/usb/serial/cp2101.c @@ -85,6 +85,8 @@ static struct usb_device_id id_table [] = { { USB_DEVICE(0x10C4, 0x81E2) }, /* Lipowsky Industrie Elektronik GmbH, Baby-LIN */ { USB_DEVICE(0x10C4, 0x81E7) }, /* Aerocomm Radio */ { USB_DEVICE(0x10C4, 0x8218) }, /* Lipowsky Industrie Elektronik GmbH, HARP-1 */ + { USB_DEVICE(0x10C4, 0x822B) }, /* Modem EDGE(GSM) Comander 2 */ + { USB_DEVICE(0x10C4, 0x826B) }, /* Cygnal Integrated Products, Inc., Fasttrax GPS demostration module */ { USB_DEVICE(0x10c4, 0x8293) }, /* Telegesys ETRX2USB */ { USB_DEVICE(0x10C4, 0x8341) }, /* Siemens MC35PU GPRS Modem */ { USB_DEVICE(0x10C4, 0x83A8) }, /* Amber Wireless AMB2560 */ diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c index c70a8f667d8..75597337583 100644 --- a/drivers/usb/serial/ftdi_sio.c +++ b/drivers/usb/serial/ftdi_sio.c @@ -660,6 +660,8 @@ static struct usb_device_id id_table_combined [] = { { USB_DEVICE(PAPOUCH_VID, PAPOUCH_QUIDO4x4_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DGQG_PID) }, { USB_DEVICE(FTDI_VID, FTDI_DOMINTELL_DUSB_PID) }, + { USB_DEVICE(ALTI2_VID, ALTI2_N3_PID) }, + { USB_DEVICE(FTDI_VID, DIEBOLD_BCS_SE923_PID) }, { }, /* Optional parameter entry */ { } /* Terminating entry */ }; diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h index 373ee09975b..1b62eff475d 100644 --- a/drivers/usb/serial/ftdi_sio.h +++ b/drivers/usb/serial/ftdi_sio.h @@ -854,6 +854,10 @@ #define FTDI_DOMINTELL_DGQG_PID 0xEF50 /* Master */ #define FTDI_DOMINTELL_DUSB_PID 0xEF51 /* DUSB01 module */ +/* Alti-2 products http://www.alti-2.com */ +#define ALTI2_VID 0x1BC9 +#define ALTI2_N3_PID 0x6001 /* Neptune 3 */ + /* Commands */ #define FTDI_SIO_RESET 0 /* Reset the port */ #define FTDI_SIO_MODEM_CTRL 1 /* Set the modem control register */ @@ -881,6 +885,11 @@ #define RATOC_PRODUCT_ID_USB60F 0xb020 /* + * DIEBOLD BCS SE923 + */ +#define DIEBOLD_BCS_SE923_PID 0xfb99 + +/* * BmRequestType: 1100 0000b * bRequest: FTDI_E2_READ * wValue: 0 diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index 5ed183477aa..6c89da9c6fe 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -158,6 +158,13 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define HUAWEI_PRODUCT_E143E 0x143E #define HUAWEI_PRODUCT_E143F 0x143F +#define QUANTA_VENDOR_ID 0x0408 +#define QUANTA_PRODUCT_Q101 0xEA02 +#define QUANTA_PRODUCT_Q111 0xEA03 +#define QUANTA_PRODUCT_GLX 0xEA04 +#define QUANTA_PRODUCT_GKE 0xEA05 +#define QUANTA_PRODUCT_GLE 0xEA06 + #define NOVATELWIRELESS_VENDOR_ID 0x1410 /* YISO PRODUCTS */ @@ -224,7 +231,7 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po #define ONDA_VENDOR_ID 0x19d2 #define ONDA_PRODUCT_MSA501HS 0x0001 #define ONDA_PRODUCT_ET502HS 0x0002 -#define ONDA_PRODUCT_MT503HS 0x0200 +#define ONDA_PRODUCT_MT503HS 0x2000 #define BANDRICH_VENDOR_ID 0x1A8D #define BANDRICH_PRODUCT_C100_1 0x1002 @@ -298,6 +305,11 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_GT) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_MODEM_EX) }, { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_ETNA_KOI_MODEM) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q101) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_Q111) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLX) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GKE) }, + { USB_DEVICE(QUANTA_VENDOR_ID, QUANTA_PRODUCT_GLE) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E600, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220, 0xff, 0xff, 0xff) }, { USB_DEVICE_AND_INTERFACE_INFO(HUAWEI_VENDOR_ID, HUAWEI_PRODUCT_E220BIS, 0xff, 0xff, 0xff) }, diff --git a/drivers/usb/serial/ti_usb_3410_5052.c b/drivers/usb/serial/ti_usb_3410_5052.c index 3cf41df302d..baf591137b8 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.c +++ b/drivers/usb/serial/ti_usb_3410_5052.c @@ -184,6 +184,7 @@ static struct usb_device_id ti_id_table_3410[7+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(MTS_VENDOR_ID, MTS_CDMA_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_GSM_PRODUCT_ID) }, { USB_DEVICE(MTS_VENDOR_ID, MTS_EDGE_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, }; static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { @@ -191,6 +192,7 @@ static struct usb_device_id ti_id_table_5052[4+TI_EXTRA_VID_PID_COUNT+1] = { { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, }; static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = { @@ -205,6 +207,7 @@ static struct usb_device_id ti_id_table_combined[6+2*TI_EXTRA_VID_PID_COUNT+1] = { USB_DEVICE(TI_VENDOR_ID, TI_5152_BOOT_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_EEPROM_PRODUCT_ID) }, { USB_DEVICE(TI_VENDOR_ID, TI_5052_FIRMWARE_PRODUCT_ID) }, + { USB_DEVICE(IBM_VENDOR_ID, IBM_4543_PRODUCT_ID) }, { } }; diff --git a/drivers/usb/serial/ti_usb_3410_5052.h b/drivers/usb/serial/ti_usb_3410_5052.h index 7e4752fbf23..b7ea5dbadee 100644 --- a/drivers/usb/serial/ti_usb_3410_5052.h +++ b/drivers/usb/serial/ti_usb_3410_5052.h @@ -27,7 +27,9 @@ /* Vendor and product ids */ #define TI_VENDOR_ID 0x0451 +#define IBM_VENDOR_ID 0x04b3 #define TI_3410_PRODUCT_ID 0x3410 +#define IBM_4543_PRODUCT_ID 0x4543 #define TI_3410_EZ430_ID 0xF430 /* TI ez430 development tool */ #define TI_5052_BOOT_PRODUCT_ID 0x5052 /* no EEPROM, no firmware */ #define TI_5152_BOOT_PRODUCT_ID 0x5152 /* no EEPROM, no firmware */ diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index a7f9513fa19..69269f73956 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -995,6 +995,16 @@ UNUSUAL_DEV( 0x071b, 0x3203, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), +/* Reported by Jean-Baptiste Onofre <jb@nanthrax.net> + * Support the following product : + * "Dane-Elec MediaTouch" + */ +UNUSUAL_DEV( 0x071b, 0x32bb, 0x0000, 0x0000, + "RockChip", + "MTP", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_NO_WP_DETECT | US_FL_MAX_SECTORS_64), + /* Reported by Massimiliano Ghilardi <massimiliano.ghilardi@gmail.com> * This USB MP3/AVI player device fails and disconnects if more than 128 * sectors (64kB) are read/written in a single command, and may be present @@ -1251,6 +1261,13 @@ UNUSUAL_DEV( 0x0840, 0x0084, 0x0001, 0x0001, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_FIX_CAPACITY), +/* Reported by Martijn Hijdra <martijn.hijdra@gmail.com> */ +UNUSUAL_DEV( 0x0840, 0x0085, 0x0001, 0x0001, + "Argosy", + "Storage", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_FIX_CAPACITY), + /* Entry and supporting patch by Theodore Kilgore <kilgota@auburn.edu>. * Flag will support Bulk devices which use a standards-violating 32-byte * Command Block Wrapper. Here, the "DC2MEGA" cameras (several brands) with @@ -1589,6 +1606,13 @@ UNUSUAL_DEV( 0x0fce, 0xd008, 0x0000, 0x0000, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_NO_WP_DETECT ), +/* Reported by The Solutor <thesolutor@gmail.com> */ +UNUSUAL_DEV( 0x0fce, 0xd0e1, 0x0000, 0x0000, + "Sony Ericsson", + "MD400", + US_SC_DEVICE, US_PR_DEVICE, NULL, + US_FL_IGNORE_DEVICE), + /* Reported by Jan Mate <mate@fiit.stuba.sk> * and by Soeren Sonnenburg <kernel@nn7.de> */ UNUSUAL_DEV( 0x0fce, 0xe030, 0x0000, 0x0000, @@ -2031,15 +2055,11 @@ UNUSUAL_DEV( 0x1652, 0x6600, 0x0201, 0x0201, US_SC_DEVICE, US_PR_DEVICE, NULL, US_FL_IGNORE_RESIDUE ), -/* Reported by Mauro Andreolini <andreoli@weblab.ing.unimo.it> - * This entry is needed to bypass the ZeroCD mechanism - * and to properly load as a modem device. - */ -UNUSUAL_DEV( 0x19d2, 0x2000, 0x0000, 0x0000, - "Onda ET502HS", - "USB MMC Storage", +UNUSUAL_DEV( 0x2116, 0x0320, 0x0001, 0x0001, + "ST", + "2A", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_IGNORE_DEVICE), + US_FL_FIX_CAPACITY), /* patch submitted by Davide Perini <perini.davide@dpsoftware.org> * and Renato Perini <rperini@email.it> diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig index 6372f8b17b4..c94f71980c1 100644 --- a/drivers/video/Kconfig +++ b/drivers/video/Kconfig @@ -2123,6 +2123,18 @@ config FB_PRE_INIT_FB Select this option if display contents should be inherited as set by the bootloader. +config FB_MX3 + tristate "MX3 Framebuffer support" + depends on FB && MX3_IPU + select FB_CFB_FILLRECT + select FB_CFB_COPYAREA + select FB_CFB_IMAGEBLIT + default y + help + This is a framebuffer device for the i.MX31 LCD Controller. So + far only synchronous displays are supported. If you plan to use + an LCD display with your i.MX31 system, say Y here. + source "drivers/video/omap/Kconfig" source "drivers/video/backlight/Kconfig" diff --git a/drivers/video/Makefile b/drivers/video/Makefile index be2b657546e..2a998ca6181 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -132,6 +132,7 @@ obj-$(CONFIG_FB_VGA16) += vga16fb.o obj-$(CONFIG_FB_OF) += offb.o obj-$(CONFIG_FB_BF54X_LQ043) += bf54x-lq043fb.o obj-$(CONFIG_FB_BFIN_T350MCQB) += bfin-t350mcqb-fb.o +obj-$(CONFIG_FB_MX3) += mx3fb.o # the test framebuffer is last obj-$(CONFIG_FB_VIRTUAL) += vfb.o diff --git a/drivers/video/aty/radeon_i2c.c b/drivers/video/aty/radeon_i2c.c index 2c5567175dc..359fc64e761 100644 --- a/drivers/video/aty/radeon_i2c.c +++ b/drivers/video/aty/radeon_i2c.c @@ -72,7 +72,6 @@ static int radeon_setup_i2c_bus(struct radeon_i2c_chan *chan, const char *name) snprintf(chan->adapter.name, sizeof(chan->adapter.name), "radeonfb %s", name); chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_HW_B_RADEON; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->rinfo->pdev->dev; chan->algo.setsda = radeon_gpio_setsda; diff --git a/drivers/video/i810/i810-i2c.c b/drivers/video/i810/i810-i2c.c index 7787c3322ff..9dd55e5324a 100644 --- a/drivers/video/i810/i810-i2c.c +++ b/drivers/video/i810/i810-i2c.c @@ -90,7 +90,6 @@ static int i810_setup_i2c_bus(struct i810fb_i2c_chan *chan, const char *name) chan->adapter.owner = THIS_MODULE; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->par->dev->dev; - chan->adapter.id = I2C_HW_B_I810; chan->algo.setsda = i810i2c_setsda; chan->algo.setscl = i810i2c_setscl; chan->algo.getsda = i810i2c_getsda; diff --git a/drivers/video/intelfb/intelfb_i2c.c b/drivers/video/intelfb/intelfb_i2c.c index 5d896b81f4e..b3065492bb2 100644 --- a/drivers/video/intelfb/intelfb_i2c.c +++ b/drivers/video/intelfb/intelfb_i2c.c @@ -111,7 +111,6 @@ static int intelfb_setup_i2c_bus(struct intelfb_info *dinfo, "intelfb %s", name); chan->adapter.class = class; chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_HW_B_INTELFB; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->dinfo->pdev->dev; chan->algo.setsda = intelfb_gpio_setsda; diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c new file mode 100644 index 00000000000..8a75d05f433 --- /dev/null +++ b/drivers/video/mx3fb.c @@ -0,0 +1,1555 @@ +/* + * Copyright (C) 2008 + * Guennadi Liakhovetski, DENX Software Engineering, <lg@denx.de> + * + * Copyright 2004-2007 Freescale Semiconductor, Inc. All Rights Reserved. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/sched.h> +#include <linux/errno.h> +#include <linux/string.h> +#include <linux/interrupt.h> +#include <linux/slab.h> +#include <linux/fb.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/ioport.h> +#include <linux/dma-mapping.h> +#include <linux/dmaengine.h> +#include <linux/console.h> +#include <linux/clk.h> +#include <linux/mutex.h> + +#include <mach/hardware.h> +#include <mach/ipu.h> +#include <mach/mx3fb.h> + +#include <asm/io.h> +#include <asm/uaccess.h> + +#define MX3FB_NAME "mx3_sdc_fb" + +#define MX3FB_REG_OFFSET 0xB4 + +/* SDC Registers */ +#define SDC_COM_CONF (0xB4 - MX3FB_REG_OFFSET) +#define SDC_GW_CTRL (0xB8 - MX3FB_REG_OFFSET) +#define SDC_FG_POS (0xBC - MX3FB_REG_OFFSET) +#define SDC_BG_POS (0xC0 - MX3FB_REG_OFFSET) +#define SDC_CUR_POS (0xC4 - MX3FB_REG_OFFSET) +#define SDC_PWM_CTRL (0xC8 - MX3FB_REG_OFFSET) +#define SDC_CUR_MAP (0xCC - MX3FB_REG_OFFSET) +#define SDC_HOR_CONF (0xD0 - MX3FB_REG_OFFSET) +#define SDC_VER_CONF (0xD4 - MX3FB_REG_OFFSET) +#define SDC_SHARP_CONF_1 (0xD8 - MX3FB_REG_OFFSET) +#define SDC_SHARP_CONF_2 (0xDC - MX3FB_REG_OFFSET) + +/* Register bits */ +#define SDC_COM_TFT_COLOR 0x00000001UL +#define SDC_COM_FG_EN 0x00000010UL +#define SDC_COM_GWSEL 0x00000020UL +#define SDC_COM_GLB_A 0x00000040UL +#define SDC_COM_KEY_COLOR_G 0x00000080UL +#define SDC_COM_BG_EN 0x00000200UL +#define SDC_COM_SHARP 0x00001000UL + +#define SDC_V_SYNC_WIDTH_L 0x00000001UL + +/* Display Interface registers */ +#define DI_DISP_IF_CONF (0x0124 - MX3FB_REG_OFFSET) +#define DI_DISP_SIG_POL (0x0128 - MX3FB_REG_OFFSET) +#define DI_SER_DISP1_CONF (0x012C - MX3FB_REG_OFFSET) +#define DI_SER_DISP2_CONF (0x0130 - MX3FB_REG_OFFSET) +#define DI_HSP_CLK_PER (0x0134 - MX3FB_REG_OFFSET) +#define DI_DISP0_TIME_CONF_1 (0x0138 - MX3FB_REG_OFFSET) +#define DI_DISP0_TIME_CONF_2 (0x013C - MX3FB_REG_OFFSET) +#define DI_DISP0_TIME_CONF_3 (0x0140 - MX3FB_REG_OFFSET) +#define DI_DISP1_TIME_CONF_1 (0x0144 - MX3FB_REG_OFFSET) +#define DI_DISP1_TIME_CONF_2 (0x0148 - MX3FB_REG_OFFSET) +#define DI_DISP1_TIME_CONF_3 (0x014C - MX3FB_REG_OFFSET) +#define DI_DISP2_TIME_CONF_1 (0x0150 - MX3FB_REG_OFFSET) +#define DI_DISP2_TIME_CONF_2 (0x0154 - MX3FB_REG_OFFSET) +#define DI_DISP2_TIME_CONF_3 (0x0158 - MX3FB_REG_OFFSET) +#define DI_DISP3_TIME_CONF (0x015C - MX3FB_REG_OFFSET) +#define DI_DISP0_DB0_MAP (0x0160 - MX3FB_REG_OFFSET) +#define DI_DISP0_DB1_MAP (0x0164 - MX3FB_REG_OFFSET) +#define DI_DISP0_DB2_MAP (0x0168 - MX3FB_REG_OFFSET) +#define DI_DISP0_CB0_MAP (0x016C - MX3FB_REG_OFFSET) +#define DI_DISP0_CB1_MAP (0x0170 - MX3FB_REG_OFFSET) +#define DI_DISP0_CB2_MAP (0x0174 - MX3FB_REG_OFFSET) +#define DI_DISP1_DB0_MAP (0x0178 - MX3FB_REG_OFFSET) +#define DI_DISP1_DB1_MAP (0x017C - MX3FB_REG_OFFSET) +#define DI_DISP1_DB2_MAP (0x0180 - MX3FB_REG_OFFSET) +#define DI_DISP1_CB0_MAP (0x0184 - MX3FB_REG_OFFSET) +#define DI_DISP1_CB1_MAP (0x0188 - MX3FB_REG_OFFSET) +#define DI_DISP1_CB2_MAP (0x018C - MX3FB_REG_OFFSET) +#define DI_DISP2_DB0_MAP (0x0190 - MX3FB_REG_OFFSET) +#define DI_DISP2_DB1_MAP (0x0194 - MX3FB_REG_OFFSET) +#define DI_DISP2_DB2_MAP (0x0198 - MX3FB_REG_OFFSET) +#define DI_DISP2_CB0_MAP (0x019C - MX3FB_REG_OFFSET) +#define DI_DISP2_CB1_MAP (0x01A0 - MX3FB_REG_OFFSET) +#define DI_DISP2_CB2_MAP (0x01A4 - MX3FB_REG_OFFSET) +#define DI_DISP3_B0_MAP (0x01A8 - MX3FB_REG_OFFSET) +#define DI_DISP3_B1_MAP (0x01AC - MX3FB_REG_OFFSET) +#define DI_DISP3_B2_MAP (0x01B0 - MX3FB_REG_OFFSET) +#define DI_DISP_ACC_CC (0x01B4 - MX3FB_REG_OFFSET) +#define DI_DISP_LLA_CONF (0x01B8 - MX3FB_REG_OFFSET) +#define DI_DISP_LLA_DATA (0x01BC - MX3FB_REG_OFFSET) + +/* DI_DISP_SIG_POL bits */ +#define DI_D3_VSYNC_POL_SHIFT 28 +#define DI_D3_HSYNC_POL_SHIFT 27 +#define DI_D3_DRDY_SHARP_POL_SHIFT 26 +#define DI_D3_CLK_POL_SHIFT 25 +#define DI_D3_DATA_POL_SHIFT 24 + +/* DI_DISP_IF_CONF bits */ +#define DI_D3_CLK_IDLE_SHIFT 26 +#define DI_D3_CLK_SEL_SHIFT 25 +#define DI_D3_DATAMSK_SHIFT 24 + +enum ipu_panel { + IPU_PANEL_SHARP_TFT, + IPU_PANEL_TFT, +}; + +struct ipu_di_signal_cfg { + unsigned datamask_en:1; + unsigned clksel_en:1; + unsigned clkidle_en:1; + unsigned data_pol:1; /* true = inverted */ + unsigned clk_pol:1; /* true = rising edge */ + unsigned enable_pol:1; + unsigned Hsync_pol:1; /* true = active high */ + unsigned Vsync_pol:1; +}; + +static const struct fb_videomode mx3fb_modedb[] = { + { + /* 240x320 @ 60 Hz */ + .name = "Sharp-QVGA", + .refresh = 60, + .xres = 240, + .yres = 320, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | + FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | + FB_SYNC_CLK_IDLE_EN, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 240x33 @ 60 Hz */ + .name = "Sharp-CLI", + .refresh = 60, + .xres = 240, + .yres = 33, + .pixclock = 185925, + .left_margin = 9, + .right_margin = 16, + .upper_margin = 7, + .lower_margin = 9 + 287, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_HOR_HIGH_ACT | FB_SYNC_SHARP_MODE | + FB_SYNC_CLK_INVERT | FB_SYNC_DATA_INVERT | + FB_SYNC_CLK_IDLE_EN, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* 640x480 @ 60 Hz */ + .name = "NEC-VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 38255, + .left_margin = 144, + .right_margin = 0, + .upper_margin = 34, + .lower_margin = 40, + .hsync_len = 1, + .vsync_len = 1, + .sync = FB_SYNC_VERT_HIGH_ACT | FB_SYNC_OE_ACT_HIGH, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* NTSC TV output */ + .name = "TV-NTSC", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 37538, + .left_margin = 38, + .right_margin = 858 - 640 - 38 - 3, + .upper_margin = 36, + .lower_margin = 518 - 480 - 36 - 1, + .hsync_len = 3, + .vsync_len = 1, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* PAL TV output */ + .name = "TV-PAL", + .refresh = 50, + .xres = 640, + .yres = 480, + .pixclock = 37538, + .left_margin = 38, + .right_margin = 960 - 640 - 38 - 32, + .upper_margin = 32, + .lower_margin = 555 - 480 - 32 - 3, + .hsync_len = 32, + .vsync_len = 3, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, { + /* TV output VGA mode, 640x480 @ 65 Hz */ + .name = "TV-VGA", + .refresh = 60, + .xres = 640, + .yres = 480, + .pixclock = 40574, + .left_margin = 35, + .right_margin = 45, + .upper_margin = 9, + .lower_margin = 1, + .hsync_len = 46, + .vsync_len = 5, + .sync = 0, + .vmode = FB_VMODE_NONINTERLACED, + .flag = 0, + }, +}; + +struct mx3fb_data { + struct fb_info *fbi; + int backlight_level; + void __iomem *reg_base; + spinlock_t lock; + struct device *dev; + + uint32_t h_start_width; + uint32_t v_start_width; +}; + +struct dma_chan_request { + struct mx3fb_data *mx3fb; + enum ipu_channel id; +}; + +/* MX3 specific framebuffer information. */ +struct mx3fb_info { + int blank; + enum ipu_channel ipu_ch; + uint32_t cur_ipu_buf; + + u32 pseudo_palette[16]; + + struct completion flip_cmpl; + struct mutex mutex; /* Protects fb-ops */ + struct mx3fb_data *mx3fb; + struct idmac_channel *idmac_channel; + struct dma_async_tx_descriptor *txd; + dma_cookie_t cookie; + struct scatterlist sg[2]; + + u32 sync; /* preserve var->sync flags */ +}; + +static void mx3fb_dma_done(void *); + +/* Used fb-mode and bpp. Can be set on kernel command line, therefore file-static. */ +static const char *fb_mode; +static unsigned long default_bpp = 16; + +static u32 mx3fb_read_reg(struct mx3fb_data *mx3fb, unsigned long reg) +{ + return __raw_readl(mx3fb->reg_base + reg); +} + +static void mx3fb_write_reg(struct mx3fb_data *mx3fb, u32 value, unsigned long reg) +{ + __raw_writel(value, mx3fb->reg_base + reg); +} + +static const uint32_t di_mappings[] = { + 0x1600AAAA, 0x00E05555, 0x00070000, 3, /* RGB888 */ + 0x0005000F, 0x000B000F, 0x0011000F, 1, /* RGB666 */ + 0x0011000F, 0x000B000F, 0x0005000F, 1, /* BGR666 */ + 0x0004003F, 0x000A000F, 0x000F003F, 1 /* RGB565 */ +}; + +static void sdc_fb_init(struct mx3fb_info *fbi) +{ + struct mx3fb_data *mx3fb = fbi->mx3fb; + uint32_t reg; + + reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); + + mx3fb_write_reg(mx3fb, reg | SDC_COM_BG_EN, SDC_COM_CONF); +} + +/* Returns enabled flag before uninit */ +static uint32_t sdc_fb_uninit(struct mx3fb_info *fbi) +{ + struct mx3fb_data *mx3fb = fbi->mx3fb; + uint32_t reg; + + reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); + + mx3fb_write_reg(mx3fb, reg & ~SDC_COM_BG_EN, SDC_COM_CONF); + + return reg & SDC_COM_BG_EN; +} + +static void sdc_enable_channel(struct mx3fb_info *mx3_fbi) +{ + struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; + struct idmac_channel *ichan = mx3_fbi->idmac_channel; + struct dma_chan *dma_chan = &ichan->dma_chan; + unsigned long flags; + dma_cookie_t cookie; + + dev_dbg(mx3fb->dev, "mx3fbi %p, desc %p, sg %p\n", mx3_fbi, + to_tx_desc(mx3_fbi->txd), to_tx_desc(mx3_fbi->txd)->sg); + + /* This enables the channel */ + if (mx3_fbi->cookie < 0) { + mx3_fbi->txd = dma_chan->device->device_prep_slave_sg(dma_chan, + &mx3_fbi->sg[0], 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT); + if (!mx3_fbi->txd) { + dev_err(mx3fb->dev, "Cannot allocate descriptor on %d\n", + dma_chan->chan_id); + return; + } + + mx3_fbi->txd->callback_param = mx3_fbi->txd; + mx3_fbi->txd->callback = mx3fb_dma_done; + + cookie = mx3_fbi->txd->tx_submit(mx3_fbi->txd); + dev_dbg(mx3fb->dev, "%d: Submit %p #%d [%c]\n", __LINE__, + mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); + } else { + if (!mx3_fbi->txd || !mx3_fbi->txd->tx_submit) { + dev_err(mx3fb->dev, "Cannot enable channel %d\n", + dma_chan->chan_id); + return; + } + + /* Just re-activate the same buffer */ + dma_async_issue_pending(dma_chan); + cookie = mx3_fbi->cookie; + dev_dbg(mx3fb->dev, "%d: Re-submit %p #%d [%c]\n", __LINE__, + mx3_fbi->txd, cookie, list_empty(&ichan->queue) ? '-' : '+'); + } + + if (cookie >= 0) { + spin_lock_irqsave(&mx3fb->lock, flags); + sdc_fb_init(mx3_fbi); + mx3_fbi->cookie = cookie; + spin_unlock_irqrestore(&mx3fb->lock, flags); + } + + /* + * Attention! Without this msleep the channel keeps generating + * interrupts. Next sdc_set_brightness() is going to be called + * from mx3fb_blank(). + */ + msleep(2); +} + +static void sdc_disable_channel(struct mx3fb_info *mx3_fbi) +{ + struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; + uint32_t enabled; + unsigned long flags; + + spin_lock_irqsave(&mx3fb->lock, flags); + + enabled = sdc_fb_uninit(mx3_fbi); + + spin_unlock_irqrestore(&mx3fb->lock, flags); + + mx3_fbi->txd->chan->device->device_terminate_all(mx3_fbi->txd->chan); + mx3_fbi->txd = NULL; + mx3_fbi->cookie = -EINVAL; +} + +/** + * sdc_set_window_pos() - set window position of the respective plane. + * @mx3fb: mx3fb context. + * @channel: IPU DMAC channel ID. + * @x_pos: X coordinate relative to the top left corner to place window at. + * @y_pos: Y coordinate relative to the top left corner to place window at. + * @return: 0 on success or negative error code on failure. + */ +static int sdc_set_window_pos(struct mx3fb_data *mx3fb, enum ipu_channel channel, + int16_t x_pos, int16_t y_pos) +{ + x_pos += mx3fb->h_start_width; + y_pos += mx3fb->v_start_width; + + if (channel != IDMAC_SDC_0) + return -EINVAL; + + mx3fb_write_reg(mx3fb, (x_pos << 16) | y_pos, SDC_BG_POS); + return 0; +} + +/** + * sdc_init_panel() - initialize a synchronous LCD panel. + * @mx3fb: mx3fb context. + * @panel: panel type. + * @pixel_clk: desired pixel clock frequency in Hz. + * @width: width of panel in pixels. + * @height: height of panel in pixels. + * @pixel_fmt: pixel format of buffer as FOURCC ASCII code. + * @h_start_width: number of pixel clocks between the HSYNC signal pulse + * and the start of valid data. + * @h_sync_width: width of the HSYNC signal in units of pixel clocks. + * @h_end_width: number of pixel clocks between the end of valid data + * and the HSYNC signal for next line. + * @v_start_width: number of lines between the VSYNC signal pulse and the + * start of valid data. + * @v_sync_width: width of the VSYNC signal in units of lines + * @v_end_width: number of lines between the end of valid data and the + * VSYNC signal for next frame. + * @sig: bitfield of signal polarities for LCD interface. + * @return: 0 on success or negative error code on failure. + */ +static int sdc_init_panel(struct mx3fb_data *mx3fb, enum ipu_panel panel, + uint32_t pixel_clk, + uint16_t width, uint16_t height, + enum pixel_fmt pixel_fmt, + uint16_t h_start_width, uint16_t h_sync_width, + uint16_t h_end_width, uint16_t v_start_width, + uint16_t v_sync_width, uint16_t v_end_width, + struct ipu_di_signal_cfg sig) +{ + unsigned long lock_flags; + uint32_t reg; + uint32_t old_conf; + uint32_t div; + struct clk *ipu_clk; + + dev_dbg(mx3fb->dev, "panel size = %d x %d", width, height); + + if (v_sync_width == 0 || h_sync_width == 0) + return -EINVAL; + + /* Init panel size and blanking periods */ + reg = ((uint32_t) (h_sync_width - 1) << 26) | + ((uint32_t) (width + h_start_width + h_end_width - 1) << 16); + mx3fb_write_reg(mx3fb, reg, SDC_HOR_CONF); + +#ifdef DEBUG + printk(KERN_CONT " hor_conf %x,", reg); +#endif + + reg = ((uint32_t) (v_sync_width - 1) << 26) | SDC_V_SYNC_WIDTH_L | + ((uint32_t) (height + v_start_width + v_end_width - 1) << 16); + mx3fb_write_reg(mx3fb, reg, SDC_VER_CONF); + +#ifdef DEBUG + printk(KERN_CONT " ver_conf %x\n", reg); +#endif + + mx3fb->h_start_width = h_start_width; + mx3fb->v_start_width = v_start_width; + + switch (panel) { + case IPU_PANEL_SHARP_TFT: + mx3fb_write_reg(mx3fb, 0x00FD0102L, SDC_SHARP_CONF_1); + mx3fb_write_reg(mx3fb, 0x00F500F4L, SDC_SHARP_CONF_2); + mx3fb_write_reg(mx3fb, SDC_COM_SHARP | SDC_COM_TFT_COLOR, SDC_COM_CONF); + break; + case IPU_PANEL_TFT: + mx3fb_write_reg(mx3fb, SDC_COM_TFT_COLOR, SDC_COM_CONF); + break; + default: + return -EINVAL; + } + + /* Init clocking */ + + /* + * Calculate divider: fractional part is 4 bits so simply multiple by + * 24 to get fractional part, as long as we stay under ~250MHz and on + * i.MX31 it (HSP_CLK) is <= 178MHz. Currently 128.267MHz + */ + dev_dbg(mx3fb->dev, "pixel clk = %d\n", pixel_clk); + + ipu_clk = clk_get(mx3fb->dev, "ipu_clk"); + div = clk_get_rate(ipu_clk) * 16 / pixel_clk; + clk_put(ipu_clk); + + if (div < 0x40) { /* Divider less than 4 */ + dev_dbg(mx3fb->dev, + "InitPanel() - Pixel clock divider less than 4\n"); + div = 0x40; + } + + spin_lock_irqsave(&mx3fb->lock, lock_flags); + + /* + * DISP3_IF_CLK_DOWN_WR is half the divider value and 2 fraction bits + * fewer. Subtract 1 extra from DISP3_IF_CLK_DOWN_WR based on timing + * debug. DISP3_IF_CLK_UP_WR is 0 + */ + mx3fb_write_reg(mx3fb, (((div / 8) - 1) << 22) | div, DI_DISP3_TIME_CONF); + + /* DI settings */ + old_conf = mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF) & 0x78FFFFFF; + old_conf |= sig.datamask_en << DI_D3_DATAMSK_SHIFT | + sig.clksel_en << DI_D3_CLK_SEL_SHIFT | + sig.clkidle_en << DI_D3_CLK_IDLE_SHIFT; + mx3fb_write_reg(mx3fb, old_conf, DI_DISP_IF_CONF); + + old_conf = mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL) & 0xE0FFFFFF; + old_conf |= sig.data_pol << DI_D3_DATA_POL_SHIFT | + sig.clk_pol << DI_D3_CLK_POL_SHIFT | + sig.enable_pol << DI_D3_DRDY_SHARP_POL_SHIFT | + sig.Hsync_pol << DI_D3_HSYNC_POL_SHIFT | + sig.Vsync_pol << DI_D3_VSYNC_POL_SHIFT; + mx3fb_write_reg(mx3fb, old_conf, DI_DISP_SIG_POL); + + switch (pixel_fmt) { + case IPU_PIX_FMT_RGB24: + mx3fb_write_reg(mx3fb, di_mappings[0], DI_DISP3_B0_MAP); + mx3fb_write_reg(mx3fb, di_mappings[1], DI_DISP3_B1_MAP); + mx3fb_write_reg(mx3fb, di_mappings[2], DI_DISP3_B2_MAP); + mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | + ((di_mappings[3] - 1) << 12), DI_DISP_ACC_CC); + break; + case IPU_PIX_FMT_RGB666: + mx3fb_write_reg(mx3fb, di_mappings[4], DI_DISP3_B0_MAP); + mx3fb_write_reg(mx3fb, di_mappings[5], DI_DISP3_B1_MAP); + mx3fb_write_reg(mx3fb, di_mappings[6], DI_DISP3_B2_MAP); + mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | + ((di_mappings[7] - 1) << 12), DI_DISP_ACC_CC); + break; + case IPU_PIX_FMT_BGR666: + mx3fb_write_reg(mx3fb, di_mappings[8], DI_DISP3_B0_MAP); + mx3fb_write_reg(mx3fb, di_mappings[9], DI_DISP3_B1_MAP); + mx3fb_write_reg(mx3fb, di_mappings[10], DI_DISP3_B2_MAP); + mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | + ((di_mappings[11] - 1) << 12), DI_DISP_ACC_CC); + break; + default: + mx3fb_write_reg(mx3fb, di_mappings[12], DI_DISP3_B0_MAP); + mx3fb_write_reg(mx3fb, di_mappings[13], DI_DISP3_B1_MAP); + mx3fb_write_reg(mx3fb, di_mappings[14], DI_DISP3_B2_MAP); + mx3fb_write_reg(mx3fb, mx3fb_read_reg(mx3fb, DI_DISP_ACC_CC) | + ((di_mappings[15] - 1) << 12), DI_DISP_ACC_CC); + break; + } + + spin_unlock_irqrestore(&mx3fb->lock, lock_flags); + + dev_dbg(mx3fb->dev, "DI_DISP_IF_CONF = 0x%08X\n", + mx3fb_read_reg(mx3fb, DI_DISP_IF_CONF)); + dev_dbg(mx3fb->dev, "DI_DISP_SIG_POL = 0x%08X\n", + mx3fb_read_reg(mx3fb, DI_DISP_SIG_POL)); + dev_dbg(mx3fb->dev, "DI_DISP3_TIME_CONF = 0x%08X\n", + mx3fb_read_reg(mx3fb, DI_DISP3_TIME_CONF)); + + return 0; +} + +/** + * sdc_set_color_key() - set the transparent color key for SDC graphic plane. + * @mx3fb: mx3fb context. + * @channel: IPU DMAC channel ID. + * @enable: boolean to enable or disable color keyl. + * @color_key: 24-bit RGB color to use as transparent color key. + * @return: 0 on success or negative error code on failure. + */ +static int sdc_set_color_key(struct mx3fb_data *mx3fb, enum ipu_channel channel, + bool enable, uint32_t color_key) +{ + uint32_t reg, sdc_conf; + unsigned long lock_flags; + + spin_lock_irqsave(&mx3fb->lock, lock_flags); + + sdc_conf = mx3fb_read_reg(mx3fb, SDC_COM_CONF); + if (channel == IDMAC_SDC_0) + sdc_conf &= ~SDC_COM_GWSEL; + else + sdc_conf |= SDC_COM_GWSEL; + + if (enable) { + reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0xFF000000L; + mx3fb_write_reg(mx3fb, reg | (color_key & 0x00FFFFFFL), + SDC_GW_CTRL); + + sdc_conf |= SDC_COM_KEY_COLOR_G; + } else { + sdc_conf &= ~SDC_COM_KEY_COLOR_G; + } + mx3fb_write_reg(mx3fb, sdc_conf, SDC_COM_CONF); + + spin_unlock_irqrestore(&mx3fb->lock, lock_flags); + + return 0; +} + +/** + * sdc_set_global_alpha() - set global alpha blending modes. + * @mx3fb: mx3fb context. + * @enable: boolean to enable or disable global alpha blending. If disabled, + * per pixel blending is used. + * @alpha: global alpha value. + * @return: 0 on success or negative error code on failure. + */ +static int sdc_set_global_alpha(struct mx3fb_data *mx3fb, bool enable, uint8_t alpha) +{ + uint32_t reg; + unsigned long lock_flags; + + spin_lock_irqsave(&mx3fb->lock, lock_flags); + + if (enable) { + reg = mx3fb_read_reg(mx3fb, SDC_GW_CTRL) & 0x00FFFFFFL; + mx3fb_write_reg(mx3fb, reg | ((uint32_t) alpha << 24), SDC_GW_CTRL); + + reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); + mx3fb_write_reg(mx3fb, reg | SDC_COM_GLB_A, SDC_COM_CONF); + } else { + reg = mx3fb_read_reg(mx3fb, SDC_COM_CONF); + mx3fb_write_reg(mx3fb, reg & ~SDC_COM_GLB_A, SDC_COM_CONF); + } + + spin_unlock_irqrestore(&mx3fb->lock, lock_flags); + + return 0; +} + +static void sdc_set_brightness(struct mx3fb_data *mx3fb, uint8_t value) +{ + /* This might be board-specific */ + mx3fb_write_reg(mx3fb, 0x03000000UL | value << 16, SDC_PWM_CTRL); + return; +} + +static uint32_t bpp_to_pixfmt(int bpp) +{ + uint32_t pixfmt = 0; + switch (bpp) { + case 24: + pixfmt = IPU_PIX_FMT_BGR24; + break; + case 32: + pixfmt = IPU_PIX_FMT_BGR32; + break; + case 16: + pixfmt = IPU_PIX_FMT_RGB565; + break; + } + return pixfmt; +} + +static int mx3fb_blank(int blank, struct fb_info *fbi); +static int mx3fb_map_video_memory(struct fb_info *fbi); +static int mx3fb_unmap_video_memory(struct fb_info *fbi); + +/** + * mx3fb_set_fix() - set fixed framebuffer parameters from variable settings. + * @info: framebuffer information pointer + * @return: 0 on success or negative error code on failure. + */ +static int mx3fb_set_fix(struct fb_info *fbi) +{ + struct fb_fix_screeninfo *fix = &fbi->fix; + struct fb_var_screeninfo *var = &fbi->var; + + strncpy(fix->id, "DISP3 BG", 8); + + fix->line_length = var->xres_virtual * var->bits_per_pixel / 8; + + fix->type = FB_TYPE_PACKED_PIXELS; + fix->accel = FB_ACCEL_NONE; + fix->visual = FB_VISUAL_TRUECOLOR; + fix->xpanstep = 1; + fix->ypanstep = 1; + + return 0; +} + +static void mx3fb_dma_done(void *arg) +{ + struct idmac_tx_desc *tx_desc = to_tx_desc(arg); + struct dma_chan *chan = tx_desc->txd.chan; + struct idmac_channel *ichannel = to_idmac_chan(chan); + struct mx3fb_data *mx3fb = ichannel->client; + struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; + + dev_dbg(mx3fb->dev, "irq %d callback\n", ichannel->eof_irq); + + /* We only need one interrupt, it will be re-enabled as needed */ + disable_irq(ichannel->eof_irq); + + complete(&mx3_fbi->flip_cmpl); +} + +/** + * mx3fb_set_par() - set framebuffer parameters and change the operating mode. + * @fbi: framebuffer information pointer. + * @return: 0 on success or negative error code on failure. + */ +static int mx3fb_set_par(struct fb_info *fbi) +{ + u32 mem_len; + struct ipu_di_signal_cfg sig_cfg; + enum ipu_panel mode = IPU_PANEL_TFT; + struct mx3fb_info *mx3_fbi = fbi->par; + struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; + struct idmac_channel *ichan = mx3_fbi->idmac_channel; + struct idmac_video_param *video = &ichan->params.video; + struct scatterlist *sg = mx3_fbi->sg; + size_t screen_size; + + dev_dbg(mx3fb->dev, "%s [%c]\n", __func__, list_empty(&ichan->queue) ? '-' : '+'); + + mutex_lock(&mx3_fbi->mutex); + + /* Total cleanup */ + if (mx3_fbi->txd) + sdc_disable_channel(mx3_fbi); + + mx3fb_set_fix(fbi); + + mem_len = fbi->var.yres_virtual * fbi->fix.line_length; + if (mem_len > fbi->fix.smem_len) { + if (fbi->fix.smem_start) + mx3fb_unmap_video_memory(fbi); + + fbi->fix.smem_len = mem_len; + if (mx3fb_map_video_memory(fbi) < 0) { + mutex_unlock(&mx3_fbi->mutex); + return -ENOMEM; + } + } + + screen_size = fbi->fix.line_length * fbi->var.yres; + + sg_init_table(&sg[0], 1); + sg_init_table(&sg[1], 1); + + sg_dma_address(&sg[0]) = fbi->fix.smem_start; + sg_set_page(&sg[0], virt_to_page(fbi->screen_base), + fbi->fix.smem_len, + offset_in_page(fbi->screen_base)); + + if (mx3_fbi->ipu_ch == IDMAC_SDC_0) { + memset(&sig_cfg, 0, sizeof(sig_cfg)); + if (fbi->var.sync & FB_SYNC_HOR_HIGH_ACT) + sig_cfg.Hsync_pol = true; + if (fbi->var.sync & FB_SYNC_VERT_HIGH_ACT) + sig_cfg.Vsync_pol = true; + if (fbi->var.sync & FB_SYNC_CLK_INVERT) + sig_cfg.clk_pol = true; + if (fbi->var.sync & FB_SYNC_DATA_INVERT) + sig_cfg.data_pol = true; + if (fbi->var.sync & FB_SYNC_OE_ACT_HIGH) + sig_cfg.enable_pol = true; + if (fbi->var.sync & FB_SYNC_CLK_IDLE_EN) + sig_cfg.clkidle_en = true; + if (fbi->var.sync & FB_SYNC_CLK_SEL_EN) + sig_cfg.clksel_en = true; + if (fbi->var.sync & FB_SYNC_SHARP_MODE) + mode = IPU_PANEL_SHARP_TFT; + + dev_dbg(fbi->device, "pixclock = %ul Hz\n", + (u32) (PICOS2KHZ(fbi->var.pixclock) * 1000UL)); + + if (sdc_init_panel(mx3fb, mode, + (PICOS2KHZ(fbi->var.pixclock)) * 1000UL, + fbi->var.xres, fbi->var.yres, + (fbi->var.sync & FB_SYNC_SWAP_RGB) ? + IPU_PIX_FMT_BGR666 : IPU_PIX_FMT_RGB666, + fbi->var.left_margin, + fbi->var.hsync_len, + fbi->var.right_margin + + fbi->var.hsync_len, + fbi->var.upper_margin, + fbi->var.vsync_len, + fbi->var.lower_margin + + fbi->var.vsync_len, sig_cfg) != 0) { + mutex_unlock(&mx3_fbi->mutex); + dev_err(fbi->device, + "mx3fb: Error initializing panel.\n"); + return -EINVAL; + } + } + + sdc_set_window_pos(mx3fb, mx3_fbi->ipu_ch, 0, 0); + + mx3_fbi->cur_ipu_buf = 0; + + video->out_pixel_fmt = bpp_to_pixfmt(fbi->var.bits_per_pixel); + video->out_width = fbi->var.xres; + video->out_height = fbi->var.yres; + video->out_stride = fbi->var.xres_virtual; + + if (mx3_fbi->blank == FB_BLANK_UNBLANK) + sdc_enable_channel(mx3_fbi); + + mutex_unlock(&mx3_fbi->mutex); + + return 0; +} + +/** + * mx3fb_check_var() - check and adjust framebuffer variable parameters. + * @var: framebuffer variable parameters + * @fbi: framebuffer information pointer + */ +static int mx3fb_check_var(struct fb_var_screeninfo *var, struct fb_info *fbi) +{ + struct mx3fb_info *mx3_fbi = fbi->par; + u32 vtotal; + u32 htotal; + + dev_dbg(fbi->device, "%s\n", __func__); + + if (var->xres_virtual < var->xres) + var->xres_virtual = var->xres; + if (var->yres_virtual < var->yres) + var->yres_virtual = var->yres; + + if ((var->bits_per_pixel != 32) && (var->bits_per_pixel != 24) && + (var->bits_per_pixel != 16)) + var->bits_per_pixel = default_bpp; + + switch (var->bits_per_pixel) { + case 16: + var->red.length = 5; + var->red.offset = 11; + var->red.msb_right = 0; + + var->green.length = 6; + var->green.offset = 5; + var->green.msb_right = 0; + + var->blue.length = 5; + var->blue.offset = 0; + var->blue.msb_right = 0; + + var->transp.length = 0; + var->transp.offset = 0; + var->transp.msb_right = 0; + break; + case 24: + var->red.length = 8; + var->red.offset = 16; + var->red.msb_right = 0; + + var->green.length = 8; + var->green.offset = 8; + var->green.msb_right = 0; + + var->blue.length = 8; + var->blue.offset = 0; + var->blue.msb_right = 0; + + var->transp.length = 0; + var->transp.offset = 0; + var->transp.msb_right = 0; + break; + case 32: + var->red.length = 8; + var->red.offset = 16; + var->red.msb_right = 0; + + var->green.length = 8; + var->green.offset = 8; + var->green.msb_right = 0; + + var->blue.length = 8; + var->blue.offset = 0; + var->blue.msb_right = 0; + + var->transp.length = 8; + var->transp.offset = 24; + var->transp.msb_right = 0; + break; + } + + if (var->pixclock < 1000) { + htotal = var->xres + var->right_margin + var->hsync_len + + var->left_margin; + vtotal = var->yres + var->lower_margin + var->vsync_len + + var->upper_margin; + var->pixclock = (vtotal * htotal * 6UL) / 100UL; + var->pixclock = KHZ2PICOS(var->pixclock); + dev_dbg(fbi->device, "pixclock set for 60Hz refresh = %u ps\n", + var->pixclock); + } + + var->height = -1; + var->width = -1; + var->grayscale = 0; + + /* Preserve sync flags */ + var->sync |= mx3_fbi->sync; + mx3_fbi->sync |= var->sync; + + return 0; +} + +static u32 chan_to_field(unsigned int chan, struct fb_bitfield *bf) +{ + chan &= 0xffff; + chan >>= 16 - bf->length; + return chan << bf->offset; +} + +static int mx3fb_setcolreg(unsigned int regno, unsigned int red, + unsigned int green, unsigned int blue, + unsigned int trans, struct fb_info *fbi) +{ + struct mx3fb_info *mx3_fbi = fbi->par; + u32 val; + int ret = 1; + + dev_dbg(fbi->device, "%s\n", __func__); + + mutex_lock(&mx3_fbi->mutex); + /* + * If greyscale is true, then we convert the RGB value + * to greyscale no matter what visual we are using. + */ + if (fbi->var.grayscale) + red = green = blue = (19595 * red + 38470 * green + + 7471 * blue) >> 16; + switch (fbi->fix.visual) { + case FB_VISUAL_TRUECOLOR: + /* + * 16-bit True Colour. We encode the RGB value + * according to the RGB bitfield information. + */ + if (regno < 16) { + u32 *pal = fbi->pseudo_palette; + + val = chan_to_field(red, &fbi->var.red); + val |= chan_to_field(green, &fbi->var.green); + val |= chan_to_field(blue, &fbi->var.blue); + + pal[regno] = val; + + ret = 0; + } + break; + + case FB_VISUAL_STATIC_PSEUDOCOLOR: + case FB_VISUAL_PSEUDOCOLOR: + break; + } + mutex_unlock(&mx3_fbi->mutex); + + return ret; +} + +/** + * mx3fb_blank() - blank the display. + */ +static int mx3fb_blank(int blank, struct fb_info *fbi) +{ + struct mx3fb_info *mx3_fbi = fbi->par; + struct mx3fb_data *mx3fb = mx3_fbi->mx3fb; + + dev_dbg(fbi->device, "%s\n", __func__); + + dev_dbg(fbi->device, "blank = %d\n", blank); + + if (mx3_fbi->blank == blank) + return 0; + + mutex_lock(&mx3_fbi->mutex); + mx3_fbi->blank = blank; + + switch (blank) { + case FB_BLANK_POWERDOWN: + case FB_BLANK_VSYNC_SUSPEND: + case FB_BLANK_HSYNC_SUSPEND: + case FB_BLANK_NORMAL: + sdc_disable_channel(mx3_fbi); + sdc_set_brightness(mx3fb, 0); + break; + case FB_BLANK_UNBLANK: + sdc_enable_channel(mx3_fbi); + sdc_set_brightness(mx3fb, mx3fb->backlight_level); + break; + } + mutex_unlock(&mx3_fbi->mutex); + + return 0; +} + +/** + * mx3fb_pan_display() - pan or wrap the display + * @var: variable screen buffer information. + * @info: framebuffer information pointer. + * + * We look only at xoffset, yoffset and the FB_VMODE_YWRAP flag + */ +static int mx3fb_pan_display(struct fb_var_screeninfo *var, + struct fb_info *fbi) +{ + struct mx3fb_info *mx3_fbi = fbi->par; + u32 y_bottom; + unsigned long base; + off_t offset; + dma_cookie_t cookie; + struct scatterlist *sg = mx3_fbi->sg; + struct dma_chan *dma_chan = &mx3_fbi->idmac_channel->dma_chan; + struct dma_async_tx_descriptor *txd; + int ret; + + dev_dbg(fbi->device, "%s [%c]\n", __func__, + list_empty(&mx3_fbi->idmac_channel->queue) ? '-' : '+'); + + if (var->xoffset > 0) { + dev_dbg(fbi->device, "x panning not supported\n"); + return -EINVAL; + } + + if (fbi->var.xoffset == var->xoffset && + fbi->var.yoffset == var->yoffset) + return 0; /* No change, do nothing */ + + y_bottom = var->yoffset; + + if (!(var->vmode & FB_VMODE_YWRAP)) + y_bottom += var->yres; + + if (y_bottom > fbi->var.yres_virtual) + return -EINVAL; + + mutex_lock(&mx3_fbi->mutex); + + offset = (var->yoffset * var->xres_virtual + var->xoffset) * + (var->bits_per_pixel / 8); + base = fbi->fix.smem_start + offset; + + dev_dbg(fbi->device, "Updating SDC BG buf %d address=0x%08lX\n", + mx3_fbi->cur_ipu_buf, base); + + /* + * We enable the End of Frame interrupt, which will free a tx-descriptor, + * which we will need for the next device_prep_slave_sg(). The + * IRQ-handler will disable the IRQ again. + */ + init_completion(&mx3_fbi->flip_cmpl); + enable_irq(mx3_fbi->idmac_channel->eof_irq); + + ret = wait_for_completion_timeout(&mx3_fbi->flip_cmpl, HZ / 10); + if (ret <= 0) { + mutex_unlock(&mx3_fbi->mutex); + dev_info(fbi->device, "Panning failed due to %s\n", ret < 0 ? + "user interrupt" : "timeout"); + return ret ? : -ETIMEDOUT; + } + + mx3_fbi->cur_ipu_buf = !mx3_fbi->cur_ipu_buf; + + sg_dma_address(&sg[mx3_fbi->cur_ipu_buf]) = base; + sg_set_page(&sg[mx3_fbi->cur_ipu_buf], + virt_to_page(fbi->screen_base + offset), fbi->fix.smem_len, + offset_in_page(fbi->screen_base + offset)); + + txd = dma_chan->device->device_prep_slave_sg(dma_chan, sg + + mx3_fbi->cur_ipu_buf, 1, DMA_TO_DEVICE, DMA_PREP_INTERRUPT); + if (!txd) { + dev_err(fbi->device, + "Error preparing a DMA transaction descriptor.\n"); + mutex_unlock(&mx3_fbi->mutex); + return -EIO; + } + + txd->callback_param = txd; + txd->callback = mx3fb_dma_done; + + /* + * Emulate original mx3fb behaviour: each new call to idmac_tx_submit() + * should switch to another buffer + */ + cookie = txd->tx_submit(txd); + dev_dbg(fbi->device, "%d: Submit %p #%d\n", __LINE__, txd, cookie); + if (cookie < 0) { + dev_err(fbi->device, + "Error updating SDC buf %d to address=0x%08lX\n", + mx3_fbi->cur_ipu_buf, base); + mutex_unlock(&mx3_fbi->mutex); + return -EIO; + } + + if (mx3_fbi->txd) + async_tx_ack(mx3_fbi->txd); + mx3_fbi->txd = txd; + + fbi->var.xoffset = var->xoffset; + fbi->var.yoffset = var->yoffset; + + if (var->vmode & FB_VMODE_YWRAP) + fbi->var.vmode |= FB_VMODE_YWRAP; + else + fbi->var.vmode &= ~FB_VMODE_YWRAP; + + mutex_unlock(&mx3_fbi->mutex); + + dev_dbg(fbi->device, "Update complete\n"); + + return 0; +} + +/* + * This structure contains the pointers to the control functions that are + * invoked by the core framebuffer driver to perform operations like + * blitting, rectangle filling, copy regions and cursor definition. + */ +static struct fb_ops mx3fb_ops = { + .owner = THIS_MODULE, + .fb_set_par = mx3fb_set_par, + .fb_check_var = mx3fb_check_var, + .fb_setcolreg = mx3fb_setcolreg, + .fb_pan_display = mx3fb_pan_display, + .fb_fillrect = cfb_fillrect, + .fb_copyarea = cfb_copyarea, + .fb_imageblit = cfb_imageblit, + .fb_blank = mx3fb_blank, +}; + +#ifdef CONFIG_PM +/* + * Power management hooks. Note that we won't be called from IRQ context, + * unlike the blank functions above, so we may sleep. + */ + +/* + * Suspends the framebuffer and blanks the screen. Power management support + */ +static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state) +{ + struct mx3fb_data *drv_data = platform_get_drvdata(pdev); + struct mx3fb_info *mx3_fbi = drv_data->fbi->par; + + acquire_console_sem(); + fb_set_suspend(drv_data->fbi, 1); + release_console_sem(); + + if (mx3_fbi->blank == FB_BLANK_UNBLANK) { + sdc_disable_channel(mx3_fbi); + sdc_set_brightness(mx3fb, 0); + + } + return 0; +} + +/* + * Resumes the framebuffer and unblanks the screen. Power management support + */ +static int mx3fb_resume(struct platform_device *pdev) +{ + struct mx3fb_data *drv_data = platform_get_drvdata(pdev); + struct mx3fb_info *mx3_fbi = drv_data->fbi->par; + + if (mx3_fbi->blank == FB_BLANK_UNBLANK) { + sdc_enable_channel(mx3_fbi); + sdc_set_brightness(mx3fb, drv_data->backlight_level); + } + + acquire_console_sem(); + fb_set_suspend(drv_data->fbi, 0); + release_console_sem(); + + return 0; +} +#else +#define mx3fb_suspend NULL +#define mx3fb_resume NULL +#endif + +/* + * Main framebuffer functions + */ + +/** + * mx3fb_map_video_memory() - allocates the DRAM memory for the frame buffer. + * @fbi: framebuffer information pointer + * @return: Error code indicating success or failure + * + * This buffer is remapped into a non-cached, non-buffered, memory region to + * allow palette and pixel writes to occur without flushing the cache. Once this + * area is remapped, all virtual memory access to the video memory should occur + * at the new region. + */ +static int mx3fb_map_video_memory(struct fb_info *fbi) +{ + int retval = 0; + dma_addr_t addr; + + fbi->screen_base = dma_alloc_writecombine(fbi->device, + fbi->fix.smem_len, + &addr, GFP_DMA); + + if (!fbi->screen_base) { + dev_err(fbi->device, "Cannot allocate %u bytes framebuffer memory\n", + fbi->fix.smem_len); + retval = -EBUSY; + goto err0; + } + + fbi->fix.smem_start = addr; + + dev_dbg(fbi->device, "allocated fb @ p=0x%08x, v=0x%p, size=%d.\n", + (uint32_t) fbi->fix.smem_start, fbi->screen_base, fbi->fix.smem_len); + + fbi->screen_size = fbi->fix.smem_len; + + /* Clear the screen */ + memset((char *)fbi->screen_base, 0, fbi->fix.smem_len); + + return 0; + +err0: + fbi->fix.smem_len = 0; + fbi->fix.smem_start = 0; + fbi->screen_base = NULL; + return retval; +} + +/** + * mx3fb_unmap_video_memory() - de-allocate frame buffer memory. + * @fbi: framebuffer information pointer + * @return: error code indicating success or failure + */ +static int mx3fb_unmap_video_memory(struct fb_info *fbi) +{ + dma_free_writecombine(fbi->device, fbi->fix.smem_len, + fbi->screen_base, fbi->fix.smem_start); + + fbi->screen_base = 0; + fbi->fix.smem_start = 0; + fbi->fix.smem_len = 0; + return 0; +} + +/** + * mx3fb_init_fbinfo() - initialize framebuffer information object. + * @return: initialized framebuffer structure. + */ +static struct fb_info *mx3fb_init_fbinfo(struct device *dev, struct fb_ops *ops) +{ + struct fb_info *fbi; + struct mx3fb_info *mx3fbi; + int ret; + + /* Allocate sufficient memory for the fb structure */ + fbi = framebuffer_alloc(sizeof(struct mx3fb_info), dev); + if (!fbi) + return NULL; + + mx3fbi = fbi->par; + mx3fbi->cookie = -EINVAL; + mx3fbi->cur_ipu_buf = 0; + + fbi->var.activate = FB_ACTIVATE_NOW; + + fbi->fbops = ops; + fbi->flags = FBINFO_FLAG_DEFAULT; + fbi->pseudo_palette = mx3fbi->pseudo_palette; + + mutex_init(&mx3fbi->mutex); + + /* Allocate colormap */ + ret = fb_alloc_cmap(&fbi->cmap, 16, 0); + if (ret < 0) { + framebuffer_release(fbi); + return NULL; + } + + return fbi; +} + +static int init_fb_chan(struct mx3fb_data *mx3fb, struct idmac_channel *ichan) +{ + struct device *dev = mx3fb->dev; + struct mx3fb_platform_data *mx3fb_pdata = dev->platform_data; + const char *name = mx3fb_pdata->name; + unsigned int irq; + struct fb_info *fbi; + struct mx3fb_info *mx3fbi; + const struct fb_videomode *mode; + int ret, num_modes; + + ichan->client = mx3fb; + irq = ichan->eof_irq; + + if (ichan->dma_chan.chan_id != IDMAC_SDC_0) + return -EINVAL; + + fbi = mx3fb_init_fbinfo(dev, &mx3fb_ops); + if (!fbi) + return -ENOMEM; + + if (!fb_mode) + fb_mode = name; + + if (!fb_mode) { + ret = -EINVAL; + goto emode; + } + + if (mx3fb_pdata->mode && mx3fb_pdata->num_modes) { + mode = mx3fb_pdata->mode; + num_modes = mx3fb_pdata->num_modes; + } else { + mode = mx3fb_modedb; + num_modes = ARRAY_SIZE(mx3fb_modedb); + } + + if (!fb_find_mode(&fbi->var, fbi, fb_mode, mode, + num_modes, NULL, default_bpp)) { + ret = -EBUSY; + goto emode; + } + + fb_videomode_to_modelist(mode, num_modes, &fbi->modelist); + + /* Default Y virtual size is 2x panel size */ + fbi->var.yres_virtual = fbi->var.yres * 2; + + mx3fb->fbi = fbi; + + /* set Display Interface clock period */ + mx3fb_write_reg(mx3fb, 0x00100010L, DI_HSP_CLK_PER); + /* Might need to trigger HSP clock change - see 44.3.3.8.5 */ + + sdc_set_brightness(mx3fb, 255); + sdc_set_global_alpha(mx3fb, true, 0xFF); + sdc_set_color_key(mx3fb, IDMAC_SDC_0, false, 0); + + mx3fbi = fbi->par; + mx3fbi->idmac_channel = ichan; + mx3fbi->ipu_ch = ichan->dma_chan.chan_id; + mx3fbi->mx3fb = mx3fb; + mx3fbi->blank = FB_BLANK_NORMAL; + + init_completion(&mx3fbi->flip_cmpl); + disable_irq(ichan->eof_irq); + dev_dbg(mx3fb->dev, "disabling irq %d\n", ichan->eof_irq); + ret = mx3fb_set_par(fbi); + if (ret < 0) + goto esetpar; + + mx3fb_blank(FB_BLANK_UNBLANK, fbi); + + dev_info(dev, "mx3fb: fb registered, using mode %s\n", fb_mode); + + ret = register_framebuffer(fbi); + if (ret < 0) + goto erfb; + + return 0; + +erfb: +esetpar: +emode: + fb_dealloc_cmap(&fbi->cmap); + framebuffer_release(fbi); + + return ret; +} + +static bool chan_filter(struct dma_chan *chan, void *arg) +{ + struct dma_chan_request *rq = arg; + struct device *dev; + struct mx3fb_platform_data *mx3fb_pdata; + + if (!rq) + return false; + + dev = rq->mx3fb->dev; + mx3fb_pdata = dev->platform_data; + + return rq->id == chan->chan_id && + mx3fb_pdata->dma_dev == chan->device->dev; +} + +static void release_fbi(struct fb_info *fbi) +{ + mx3fb_unmap_video_memory(fbi); + + fb_dealloc_cmap(&fbi->cmap); + + unregister_framebuffer(fbi); + framebuffer_release(fbi); +} + +static int mx3fb_probe(struct platform_device *pdev) +{ + struct device *dev = &pdev->dev; + int ret; + struct resource *sdc_reg; + struct mx3fb_data *mx3fb; + dma_cap_mask_t mask; + struct dma_chan *chan; + struct dma_chan_request rq; + + /* + * Display Interface (DI) and Synchronous Display Controller (SDC) + * registers + */ + sdc_reg = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (!sdc_reg) + return -EINVAL; + + mx3fb = kzalloc(sizeof(*mx3fb), GFP_KERNEL); + if (!mx3fb) + return -ENOMEM; + + spin_lock_init(&mx3fb->lock); + + mx3fb->reg_base = ioremap(sdc_reg->start, resource_size(sdc_reg)); + if (!mx3fb->reg_base) { + ret = -ENOMEM; + goto eremap; + } + + pr_debug("Remapped %x to %x at %p\n", sdc_reg->start, sdc_reg->end, + mx3fb->reg_base); + + /* IDMAC interface */ + dmaengine_get(); + + mx3fb->dev = dev; + platform_set_drvdata(pdev, mx3fb); + + rq.mx3fb = mx3fb; + + dma_cap_zero(mask); + dma_cap_set(DMA_SLAVE, mask); + dma_cap_set(DMA_PRIVATE, mask); + rq.id = IDMAC_SDC_0; + chan = dma_request_channel(mask, chan_filter, &rq); + if (!chan) { + ret = -EBUSY; + goto ersdc0; + } + + ret = init_fb_chan(mx3fb, to_idmac_chan(chan)); + if (ret < 0) + goto eisdc0; + + mx3fb->backlight_level = 255; + + return 0; + +eisdc0: + dma_release_channel(chan); +ersdc0: + dmaengine_put(); + iounmap(mx3fb->reg_base); +eremap: + kfree(mx3fb); + dev_err(dev, "mx3fb: failed to register fb\n"); + return ret; +} + +static int mx3fb_remove(struct platform_device *dev) +{ + struct mx3fb_data *mx3fb = platform_get_drvdata(dev); + struct fb_info *fbi = mx3fb->fbi; + struct mx3fb_info *mx3_fbi = fbi->par; + struct dma_chan *chan; + + chan = &mx3_fbi->idmac_channel->dma_chan; + release_fbi(fbi); + + dma_release_channel(chan); + dmaengine_put(); + + iounmap(mx3fb->reg_base); + kfree(mx3fb); + return 0; +} + +static struct platform_driver mx3fb_driver = { + .driver = { + .name = MX3FB_NAME, + }, + .probe = mx3fb_probe, + .remove = mx3fb_remove, + .suspend = mx3fb_suspend, + .resume = mx3fb_resume, +}; + +/* + * Parse user specified options (`video=mx3fb:') + * example: + * video=mx3fb:bpp=16 + */ +static int mx3fb_setup(void) +{ +#ifndef MODULE + char *opt, *options = NULL; + + if (fb_get_options("mx3fb", &options)) + return -ENODEV; + + if (!options || !*options) + return 0; + + while ((opt = strsep(&options, ",")) != NULL) { + if (!*opt) + continue; + if (!strncmp(opt, "bpp=", 4)) + default_bpp = simple_strtoul(opt + 4, NULL, 0); + else + fb_mode = opt; + } +#endif + + return 0; +} + +static int __init mx3fb_init(void) +{ + int ret = mx3fb_setup(); + + if (ret < 0) + return ret; + + ret = platform_driver_register(&mx3fb_driver); + return ret; +} + +static void __exit mx3fb_exit(void) +{ + platform_driver_unregister(&mx3fb_driver); +} + +module_init(mx3fb_init); +module_exit(mx3fb_exit); + +MODULE_AUTHOR("Freescale Semiconductor, Inc."); +MODULE_DESCRIPTION("MX3 framebuffer driver"); +MODULE_ALIAS("platform:" MX3FB_NAME); +MODULE_LICENSE("GPL v2"); diff --git a/drivers/video/nvidia/nv_i2c.c b/drivers/video/nvidia/nv_i2c.c index 6fd7cb8f9b8..6aaddb4f678 100644 --- a/drivers/video/nvidia/nv_i2c.c +++ b/drivers/video/nvidia/nv_i2c.c @@ -87,7 +87,6 @@ static int nvidia_setup_i2c_bus(struct nvidia_i2c_chan *chan, const char *name, strcpy(chan->adapter.name, name); chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_HW_B_NVIDIA; chan->adapter.class = i2c_class; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->par->pci_dev->dev; diff --git a/drivers/video/omap/lcdc.c b/drivers/video/omap/lcdc.c index 6e2ea751876..ab394925667 100644 --- a/drivers/video/omap/lcdc.c +++ b/drivers/video/omap/lcdc.c @@ -800,14 +800,14 @@ static int omap_lcdc_init(struct omapfb_device *fbdev, int ext_mode, /* FIXME: * According to errata some platforms have a clock rate limitiation */ - lcdc.lcd_ck = clk_get(NULL, "lcd_ck"); + lcdc.lcd_ck = clk_get(fbdev->dev, "lcd_ck"); if (IS_ERR(lcdc.lcd_ck)) { dev_err(fbdev->dev, "unable to access LCD clock\n"); r = PTR_ERR(lcdc.lcd_ck); goto fail0; } - tc_ck = clk_get(NULL, "tc_ck"); + tc_ck = clk_get(fbdev->dev, "tc_ck"); if (IS_ERR(tc_ck)) { dev_err(fbdev->dev, "unable to access TC clock\n"); r = PTR_ERR(tc_ck); diff --git a/drivers/video/savage/savagefb-i2c.c b/drivers/video/savage/savagefb-i2c.c index 783d4adffb9..574b29e9f8f 100644 --- a/drivers/video/savage/savagefb-i2c.c +++ b/drivers/video/savage/savagefb-i2c.c @@ -137,7 +137,6 @@ static int savage_setup_i2c_bus(struct savagefb_i2c_chan *chan, if (chan->par) { strcpy(chan->adapter.name, name); chan->adapter.owner = THIS_MODULE; - chan->adapter.id = I2C_HW_B_SAVAGE; chan->adapter.algo_data = &chan->algo; chan->adapter.dev.parent = &chan->par->pcidev->dev; chan->algo.udelay = 10; diff --git a/drivers/watchdog/Kconfig b/drivers/watchdog/Kconfig index 3efa12f9ee5..09a3d5522b4 100644 --- a/drivers/watchdog/Kconfig +++ b/drivers/watchdog/Kconfig @@ -187,10 +187,10 @@ config EP93XX_WATCHDOG config OMAP_WATCHDOG tristate "OMAP Watchdog" - depends on ARCH_OMAP16XX || ARCH_OMAP24XX + depends on ARCH_OMAP16XX || ARCH_OMAP24XX || ARCH_OMAP34XX help - Support for TI OMAP1610/OMAP1710/OMAP2420 watchdog. Say 'Y' here to - enable the OMAP1610/OMAP1710 watchdog timer. + Support for TI OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog. Say 'Y' + here to enable the OMAP1610/OMAP1710/OMAP2420/OMAP3430 watchdog timer. config PNX4008_WATCHDOG tristate "PNX4008 Watchdog" diff --git a/drivers/watchdog/at91rm9200_wdt.c b/drivers/watchdog/at91rm9200_wdt.c index 993e5f52afe..5531691f46e 100644 --- a/drivers/watchdog/at91rm9200_wdt.c +++ b/drivers/watchdog/at91rm9200_wdt.c @@ -13,6 +13,7 @@ #include <linux/errno.h> #include <linux/fs.h> #include <linux/init.h> +#include <linux/io.h> #include <linux/kernel.h> #include <linux/miscdevice.h> #include <linux/module.h> diff --git a/drivers/watchdog/rdc321x_wdt.c b/drivers/watchdog/rdc321x_wdt.c index bf92802f2bb..36e221beedc 100644 --- a/drivers/watchdog/rdc321x_wdt.c +++ b/drivers/watchdog/rdc321x_wdt.c @@ -37,7 +37,7 @@ #include <linux/io.h> #include <linux/uaccess.h> -#include <asm/mach-rdc321x/rdc321x_defs.h> +#include <asm/rdc321x_defs.h> #define RDC_WDT_MASK 0x80000000 /* Mask */ #define RDC_WDT_EN 0x00800000 /* Enable bit */ diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index 8dc7109d61b..2ba8f95516a 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -298,6 +298,14 @@ static int decrease_reservation(unsigned long nr_pages) frame_list[i] = pfn_to_mfn(pfn); scrub_page(page); + + if (!PageHighMem(page)) { + ret = HYPERVISOR_update_va_mapping( + (unsigned long)__va(pfn << PAGE_SHIFT), + __pte_ma(0), 0); + BUG_ON(ret); + } + } /* Ensure that ballooned highmem pages don't have kmaps. */ diff --git a/drivers/xen/events.c b/drivers/xen/events.c index eb0dfdeaa94..3141e149d59 100644 --- a/drivers/xen/events.c +++ b/drivers/xen/events.c @@ -26,6 +26,7 @@ #include <linux/irq.h> #include <linux/module.h> #include <linux/string.h> +#include <linux/bootmem.h> #include <asm/ptrace.h> #include <asm/irq.h> @@ -75,7 +76,14 @@ enum { static int evtchn_to_irq[NR_EVENT_CHANNELS] = { [0 ... NR_EVENT_CHANNELS-1] = -1 }; -static unsigned long cpu_evtchn_mask[NR_CPUS][NR_EVENT_CHANNELS/BITS_PER_LONG]; +struct cpu_evtchn_s { + unsigned long bits[NR_EVENT_CHANNELS/BITS_PER_LONG]; +}; +static struct cpu_evtchn_s *cpu_evtchn_mask_p; +static inline unsigned long *cpu_evtchn_mask(int cpu) +{ + return cpu_evtchn_mask_p[cpu].bits; +} static u8 cpu_evtchn[NR_EVENT_CHANNELS]; /* Reference counts for bindings to IRQs. */ @@ -115,7 +123,7 @@ static inline unsigned long active_evtchns(unsigned int cpu, unsigned int idx) { return (sh->evtchn_pending[idx] & - cpu_evtchn_mask[cpu][idx] & + cpu_evtchn_mask(cpu)[idx] & ~sh->evtchn_mask[idx]); } @@ -125,11 +133,11 @@ static void bind_evtchn_to_cpu(unsigned int chn, unsigned int cpu) BUG_ON(irq == -1); #ifdef CONFIG_SMP - irq_to_desc(irq)->affinity = cpumask_of_cpu(cpu); + cpumask_copy(irq_to_desc(irq)->affinity, cpumask_of(cpu)); #endif - __clear_bit(chn, cpu_evtchn_mask[cpu_evtchn[chn]]); - __set_bit(chn, cpu_evtchn_mask[cpu]); + __clear_bit(chn, cpu_evtchn_mask(cpu_evtchn[chn])); + __set_bit(chn, cpu_evtchn_mask(cpu)); cpu_evtchn[chn] = cpu; } @@ -142,12 +150,12 @@ static void init_evtchn_cpu_bindings(void) /* By default all event channels notify CPU#0. */ for_each_irq_desc(i, desc) { - desc->affinity = cpumask_of_cpu(0); + cpumask_copy(desc->affinity, cpumask_of(0)); } #endif memset(cpu_evtchn, 0, sizeof(cpu_evtchn)); - memset(cpu_evtchn_mask[0], ~0, sizeof(cpu_evtchn_mask[0])); + memset(cpu_evtchn_mask(0), ~0, sizeof(cpu_evtchn_mask(0))); } static inline unsigned int cpu_from_evtchn(unsigned int evtchn) @@ -822,6 +830,10 @@ static struct irq_chip xen_dynamic_chip __read_mostly = { void __init xen_init_IRQ(void) { int i; + size_t size = nr_cpu_ids * sizeof(struct cpu_evtchn_s); + + cpu_evtchn_mask_p = alloc_bootmem(size); + BUG_ON(cpu_evtchn_mask_p == NULL); init_evtchn_cpu_bindings(); diff --git a/drivers/xen/manage.c b/drivers/xen/manage.c index 9b91617b958..e7e83b65c18 100644 --- a/drivers/xen/manage.c +++ b/drivers/xen/manage.c @@ -100,7 +100,7 @@ static void do_suspend(void) /* XXX use normal device tree? */ xenbus_suspend(); - err = stop_machine(xen_suspend, &cancelled, &cpumask_of_cpu(0)); + err = stop_machine(xen_suspend, &cancelled, cpumask_of(0)); if (err) { printk(KERN_ERR "failed to start xen_suspend: %d\n", err); goto out; diff --git a/drivers/xen/xenfs/xenbus.c b/drivers/xen/xenfs/xenbus.c index 875a4c59c59..a9592d981b1 100644 --- a/drivers/xen/xenfs/xenbus.c +++ b/drivers/xen/xenfs/xenbus.c @@ -291,7 +291,7 @@ static void watch_fired(struct xenbus_watch *watch, static int xenbus_write_transaction(unsigned msg_type, struct xenbus_file_priv *u) { - int rc, ret; + int rc; void *reply; struct xenbus_transaction_holder *trans = NULL; LIST_HEAD(staging_q); @@ -326,15 +326,14 @@ static int xenbus_write_transaction(unsigned msg_type, } mutex_lock(&u->reply_mutex); - ret = queue_reply(&staging_q, &u->u.msg, sizeof(u->u.msg)); - if (!ret) - ret = queue_reply(&staging_q, reply, u->u.msg.len); - if (!ret) { + rc = queue_reply(&staging_q, &u->u.msg, sizeof(u->u.msg)); + if (!rc) + rc = queue_reply(&staging_q, reply, u->u.msg.len); + if (!rc) { list_splice_tail(&staging_q, &u->read_buffers); wake_up(&u->read_waitq); } else { queue_cleanup(&staging_q); - rc = ret; } mutex_unlock(&u->reply_mutex); diff --git a/fs/9p/Kconfig b/fs/9p/Kconfig new file mode 100644 index 00000000000..74e0723e90b --- /dev/null +++ b/fs/9p/Kconfig @@ -0,0 +1,10 @@ +config 9P_FS + tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)" + depends on INET && NET_9P && EXPERIMENTAL + help + If you say Y here, you will get experimental support for + Plan 9 resource sharing via the 9P2000 protocol. + + See <http://v9fs.sf.net> for more information. + + If unsure, say N. diff --git a/fs/Kconfig b/fs/Kconfig index 51307b0fdf0..93945dd0b1a 100644 --- a/fs/Kconfig +++ b/fs/Kconfig @@ -27,141 +27,8 @@ config FS_MBCACHE default y if EXT4_FS=y && EXT4_FS_XATTR default m if EXT2_FS_XATTR || EXT3_FS_XATTR || EXT4_FS_XATTR -config REISERFS_FS - tristate "Reiserfs support" - help - Stores not just filenames but the files themselves in a balanced - tree. Uses journalling. - - Balanced trees are more efficient than traditional file system - architectural foundations. - - In general, ReiserFS is as fast as ext2, but is very efficient with - large directories and small files. Additional patches are needed - for NFS and quotas, please see <http://www.namesys.com/> for links. - - It is more easily extended to have features currently found in - database and keyword search systems than block allocation based file - systems are. The next version will be so extended, and will support - plugins consistent with our motto ``It takes more than a license to - make source code open.'' - - Read <http://www.namesys.com/> to learn more about reiserfs. - - Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com. - - If you like it, you can pay us to add new features to it that you - need, buy a support contract, or pay us to port it to another OS. - -config REISERFS_CHECK - bool "Enable reiserfs debug mode" - depends on REISERFS_FS - help - If you set this to Y, then ReiserFS will perform every check it can - possibly imagine of its internal consistency throughout its - operation. It will also go substantially slower. More than once we - have forgotten that this was on, and then gone despondent over the - latest benchmarks.:-) Use of this option allows our team to go all - out in checking for consistency when debugging without fear of its - effect on end users. If you are on the verge of sending in a bug - report, say Y and you might get a useful error message. Almost - everyone should say N. - -config REISERFS_PROC_INFO - bool "Stats in /proc/fs/reiserfs" - depends on REISERFS_FS && PROC_FS - help - Create under /proc/fs/reiserfs a hierarchy of files, displaying - various ReiserFS statistics and internal data at the expense of - making your kernel or module slightly larger (+8 KB). This also - increases the amount of kernel memory required for each mount. - Almost everyone but ReiserFS developers and people fine-tuning - reiserfs or tracing problems should say N. - -config REISERFS_FS_XATTR - bool "ReiserFS extended attributes" - depends on REISERFS_FS - help - Extended attributes are name:value pairs associated with inodes by - the kernel or by users (see the attr(5) manual page, or visit - <http://acl.bestbits.at/> for details). - - If unsure, say N. - -config REISERFS_FS_POSIX_ACL - bool "ReiserFS POSIX Access Control Lists" - depends on REISERFS_FS_XATTR - select FS_POSIX_ACL - help - Posix Access Control Lists (ACLs) support permissions for users and - groups beyond the owner/group/world scheme. - - To learn more about Access Control Lists, visit the Posix ACLs for - Linux website <http://acl.bestbits.at/>. - - If you don't know what Access Control Lists are, say N - -config REISERFS_FS_SECURITY - bool "ReiserFS Security Labels" - depends on REISERFS_FS_XATTR - help - Security labels support alternative access control models - implemented by security modules like SELinux. This option - enables an extended attribute handler for file security - labels in the ReiserFS filesystem. - - If you are not using a security module that requires using - extended attributes for file security labels, say N. - -config JFS_FS - tristate "JFS filesystem support" - select NLS - help - This is a port of IBM's Journaled Filesystem . More information is - available in the file <file:Documentation/filesystems/jfs.txt>. - - If you do not intend to use the JFS filesystem, say N. - -config JFS_POSIX_ACL - bool "JFS POSIX Access Control Lists" - depends on JFS_FS - select FS_POSIX_ACL - help - Posix Access Control Lists (ACLs) support permissions for users and - groups beyond the owner/group/world scheme. - - To learn more about Access Control Lists, visit the Posix ACLs for - Linux website <http://acl.bestbits.at/>. - - If you don't know what Access Control Lists are, say N - -config JFS_SECURITY - bool "JFS Security Labels" - depends on JFS_FS - help - Security labels support alternative access control models - implemented by security modules like SELinux. This option - enables an extended attribute handler for file security - labels in the jfs filesystem. - - If you are not using a security module that requires using - extended attributes for file security labels, say N. - -config JFS_DEBUG - bool "JFS debugging" - depends on JFS_FS - help - If you are experiencing any problems with the JFS filesystem, say - Y here. This will result in additional debugging messages to be - written to the system log. Under normal circumstances, this - results in very little overhead. - -config JFS_STATISTICS - bool "JFS statistics" - depends on JFS_FS - help - Enabling this option will cause statistics from the JFS file system - to be made available to the user in the /proc/fs/jfs/ directory. +source "fs/reiserfs/Kconfig" +source "fs/jfs/Kconfig" config FS_POSIX_ACL # Posix ACL utility routines (for now, only ext2/ext3/jfs/reiserfs/nfs4) @@ -182,111 +49,8 @@ config FILE_LOCKING source "fs/xfs/Kconfig" source "fs/gfs2/Kconfig" - -config OCFS2_FS - tristate "OCFS2 file system support" - depends on NET && SYSFS - select CONFIGFS_FS - select JBD2 - select CRC32 - select QUOTA - select QUOTA_TREE - help - OCFS2 is a general purpose extent based shared disk cluster file - system with many similarities to ext3. It supports 64 bit inode - numbers, and has automatically extending metadata groups which may - also make it attractive for non-clustered use. - - You'll want to install the ocfs2-tools package in order to at least - get "mount.ocfs2". - - Project web page: http://oss.oracle.com/projects/ocfs2 - Tools web page: http://oss.oracle.com/projects/ocfs2-tools - OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/ - - For more information on OCFS2, see the file - <file:Documentation/filesystems/ocfs2.txt>. - -config OCFS2_FS_O2CB - tristate "O2CB Kernelspace Clustering" - depends on OCFS2_FS - default y - help - OCFS2 includes a simple kernelspace clustering package, the OCFS2 - Cluster Base. It only requires a very small userspace component - to configure it. This comes with the standard ocfs2-tools package. - O2CB is limited to maintaining a cluster for OCFS2 file systems. - It cannot manage any other cluster applications. - - It is always safe to say Y here, as the clustering method is - run-time selectable. - -config OCFS2_FS_USERSPACE_CLUSTER - tristate "OCFS2 Userspace Clustering" - depends on OCFS2_FS && DLM - default y - help - This option will allow OCFS2 to use userspace clustering services - in conjunction with the DLM in fs/dlm. If you are using a - userspace cluster manager, say Y here. - - It is safe to say Y, as the clustering method is run-time - selectable. - -config OCFS2_FS_STATS - bool "OCFS2 statistics" - depends on OCFS2_FS - default y - help - This option allows some fs statistics to be captured. Enabling - this option may increase the memory consumption. - -config OCFS2_DEBUG_MASKLOG - bool "OCFS2 logging support" - depends on OCFS2_FS - default y - help - The ocfs2 filesystem has an extensive logging system. The system - allows selection of events to log via files in /sys/o2cb/logmask/. - This option will enlarge your kernel, but it allows debugging of - ocfs2 filesystem issues. - -config OCFS2_DEBUG_FS - bool "OCFS2 expensive checks" - depends on OCFS2_FS - default n - help - This option will enable expensive consistency checks. Enable - this option for debugging only as it is likely to decrease - performance of the filesystem. - -config OCFS2_FS_POSIX_ACL - bool "OCFS2 POSIX Access Control Lists" - depends on OCFS2_FS - select FS_POSIX_ACL - default n - help - Posix Access Control Lists (ACLs) support permissions for users and - groups beyond the owner/group/world scheme. - -config BTRFS_FS - tristate "Btrfs filesystem (EXPERIMENTAL) Unstable disk format" - depends on EXPERIMENTAL - select LIBCRC32C - select ZLIB_INFLATE - select ZLIB_DEFLATE - help - Btrfs is a new filesystem with extents, writable snapshotting, - support for multiple devices and many more features. - - Btrfs is highly experimental, and THE DISK FORMAT IS NOT YET - FINALIZED. You should say N here unless you are interested in - testing Btrfs with non-critical data. - - To compile this file system support as a module, choose M here. The - module will be called btrfs. - - If unsure, say N. +source "fs/ocfs2/Kconfig" +source "fs/btrfs/Kconfig" endif # BLOCK @@ -348,64 +112,9 @@ config QUOTACTL depends on XFS_QUOTA || QUOTA default y -config AUTOFS_FS - tristate "Kernel automounter support" - help - The automounter is a tool to automatically mount remote file systems - on demand. This implementation is partially kernel-based to reduce - overhead in the already-mounted case; this is unlike the BSD - automounter (amd), which is a pure user space daemon. - - To use the automounter you need the user-space tools from the autofs - package; you can find the location in <file:Documentation/Changes>. - You also want to answer Y to "NFS file system support", below. - - If you want to use the newer version of the automounter with more - features, say N here and say Y to "Kernel automounter v4 support", - below. - - To compile this support as a module, choose M here: the module will be - called autofs. - - If you are not a part of a fairly large, distributed network, you - probably do not need an automounter, and can say N here. - -config AUTOFS4_FS - tristate "Kernel automounter version 4 support (also supports v3)" - help - The automounter is a tool to automatically mount remote file systems - on demand. This implementation is partially kernel-based to reduce - overhead in the already-mounted case; this is unlike the BSD - automounter (amd), which is a pure user space daemon. - - To use the automounter you need the user-space tools from - <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also - want to answer Y to "NFS file system support", below. - - To compile this support as a module, choose M here: the module will be - called autofs4. You will need to add "alias autofs autofs4" to your - modules configuration file. - - If you are not a part of a fairly large, distributed network or - don't have a laptop which needs to dynamically reconfigure to the - local network, you probably do not need an automounter, and can say - N here. - -config FUSE_FS - tristate "FUSE (Filesystem in Userspace) support" - help - With FUSE it is possible to implement a fully functional filesystem - in a userspace program. - - There's also companion library: libfuse. This library along with - utilities is available from the FUSE homepage: - <http://fuse.sourceforge.net/> - - See <file:Documentation/filesystems/fuse.txt> for more information. - See <file:Documentation/Changes> for needed library/utility version. - - If you want to develop a userspace FS, or if you want to use - a filesystem based on FUSE, answer Y or M. +source "fs/autofs/Kconfig" +source "fs/autofs4/Kconfig" +source "fs/fuse/Kconfig" config GENERIC_ACL bool @@ -414,64 +123,8 @@ config GENERIC_ACL if BLOCK menu "CD-ROM/DVD Filesystems" -config ISO9660_FS - tristate "ISO 9660 CDROM file system support" - help - This is the standard file system used on CD-ROMs. It was previously - known as "High Sierra File System" and is called "hsfs" on other - Unix systems. The so-called Rock-Ridge extensions which allow for - long Unix filenames and symbolic links are also supported by this - driver. If you have a CD-ROM drive and want to do more with it than - just listen to audio CDs and watch its LEDs, say Y (and read - <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO, - available from <http://www.tldp.org/docs.html#howto>), thereby - enlarging your kernel by about 27 KB; otherwise say N. - - To compile this file system support as a module, choose M here: the - module will be called isofs. - -config JOLIET - bool "Microsoft Joliet CDROM extensions" - depends on ISO9660_FS - select NLS - help - Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system - which allows for long filenames in unicode format (unicode is the - new 16 bit character code, successor to ASCII, which encodes the - characters of almost all languages of the world; see - <http://www.unicode.org/> for more information). Say Y here if you - want to be able to read Joliet CD-ROMs under Linux. - -config ZISOFS - bool "Transparent decompression extension" - depends on ISO9660_FS - select ZLIB_INFLATE - help - This is a Linux-specific extension to RockRidge which lets you store - data in compressed form on a CD-ROM and have it transparently - decompressed when the CD-ROM is accessed. See - <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools - necessary to create such a filesystem. Say Y here if you want to be - able to read such compressed CD-ROMs. - -config UDF_FS - tristate "UDF file system support" - select CRC_ITU_T - help - This is the new file system used on some CD-ROMs and DVDs. Say Y if - you intend to mount DVD discs or CDRW's written in packet mode, or - if written to by other UDF utilities, such as DirectCD. - Please read <file:Documentation/filesystems/udf.txt>. - - To compile this file system support as a module, choose M here: the - module will be called udf. - - If unsure, say N. - -config UDF_NLS - bool - default y - depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y) +source "fs/isofs/Kconfig" +source "fs/udf/Kconfig" endmenu endif # BLOCK @@ -479,182 +132,8 @@ endif # BLOCK if BLOCK menu "DOS/FAT/NT Filesystems" -config FAT_FS - tristate - select NLS - help - If you want to use one of the FAT-based file systems (the MS-DOS and - VFAT (Windows 95) file systems), then you must say Y or M here - to include FAT support. You will then be able to mount partitions or - diskettes with FAT-based file systems and transparently access the - files on them, i.e. MSDOS files will look and behave just like all - other Unix files. - - This FAT support is not a file system in itself, it only provides - the foundation for the other file systems. You will have to say Y or - M to at least one of "MSDOS fs support" or "VFAT fs support" in - order to make use of it. - - Another way to read and write MSDOS floppies and hard drive - partitions from within Linux (but not transparently) is with the - mtools ("man mtools") program suite. You don't need to say Y here in - order to do that. - - If you need to move large files on floppies between a DOS and a - Linux box, say Y here, mount the floppy under Linux with an MSDOS - file system and use GNU tar's M option. GNU tar is a program - available for Unix and DOS ("man tar" or "info tar"). - - The FAT support will enlarge your kernel by about 37 KB. If unsure, - say Y. - - To compile this as a module, choose M here: the module will be called - fat. Note that if you compile the FAT support as a module, you - cannot compile any of the FAT-based file systems into the kernel - -- they will have to be modules as well. - -config MSDOS_FS - tristate "MSDOS fs support" - select FAT_FS - help - This allows you to mount MSDOS partitions of your hard drive (unless - they are compressed; to access compressed MSDOS partitions under - Linux, you can either use the DOS emulator DOSEMU, described in the - DOSEMU-HOWTO, available from - <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in - <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you - intend to use dosemu with a non-compressed MSDOS partition, say Y - here) and MSDOS floppies. This means that file access becomes - transparent, i.e. the MSDOS files look and behave just like all - other Unix files. - - If you have Windows 95 or Windows NT installed on your MSDOS - partitions, you should use the VFAT file system (say Y to "VFAT fs - support" below), or you will not be able to see the long filenames - generated by Windows 95 / Windows NT. - - This option will enlarge your kernel by about 7 KB. If unsure, - answer Y. This will only work if you said Y to "DOS FAT fs support" - as well. To compile this as a module, choose M here: the module will - be called msdos. - -config VFAT_FS - tristate "VFAT (Windows-95) fs support" - select FAT_FS - help - This option provides support for normal Windows file systems with - long filenames. That includes non-compressed FAT-based file systems - used by Windows 95, Windows 98, Windows NT 4.0, and the Unix - programs from the mtools package. - - The VFAT support enlarges your kernel by about 10 KB and it only - works if you said Y to the "DOS FAT fs support" above. Please read - the file <file:Documentation/filesystems/vfat.txt> for details. If - unsure, say Y. - - To compile this as a module, choose M here: the module will be called - vfat. - -config FAT_DEFAULT_CODEPAGE - int "Default codepage for FAT" - depends on MSDOS_FS || VFAT_FS - default 437 - help - This option should be set to the codepage of your FAT filesystems. - It can be overridden with the "codepage" mount option. - See <file:Documentation/filesystems/vfat.txt> for more information. - -config FAT_DEFAULT_IOCHARSET - string "Default iocharset for FAT" - depends on VFAT_FS - default "iso8859-1" - help - Set this to the default input/output character set you'd - like FAT to use. It should probably match the character set - that most of your FAT filesystems use, and can be overridden - with the "iocharset" mount option for FAT filesystems. - Note that "utf8" is not recommended for FAT filesystems. - If unsure, you shouldn't set "utf8" here. - See <file:Documentation/filesystems/vfat.txt> for more information. - -config NTFS_FS - tristate "NTFS file system support" - select NLS - help - NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003. - - Saying Y or M here enables read support. There is partial, but - safe, write support available. For write support you must also - say Y to "NTFS write support" below. - - There are also a number of user-space tools available, called - ntfsprogs. These include ntfsundelete and ntfsresize, that work - without NTFS support enabled in the kernel. - - This is a rewrite from scratch of Linux NTFS support and replaced - the old NTFS code starting with Linux 2.5.11. A backport to - the Linux 2.4 kernel series is separately available as a patch - from the project web site. - - For more information see <file:Documentation/filesystems/ntfs.txt> - and <http://www.linux-ntfs.org/>. - - To compile this file system support as a module, choose M here: the - module will be called ntfs. - - If you are not using Windows NT, 2000, XP or 2003 in addition to - Linux on your computer it is safe to say N. - -config NTFS_DEBUG - bool "NTFS debugging support" - depends on NTFS_FS - help - If you are experiencing any problems with the NTFS file system, say - Y here. This will result in additional consistency checks to be - performed by the driver as well as additional debugging messages to - be written to the system log. Note that debugging messages are - disabled by default. To enable them, supply the option debug_msgs=1 - at the kernel command line when booting the kernel or as an option - to insmod when loading the ntfs module. Once the driver is active, - you can enable debugging messages by doing (as root): - echo 1 > /proc/sys/fs/ntfs-debug - Replacing the "1" with "0" would disable debug messages. - - If you leave debugging messages disabled, this results in little - overhead, but enabling debug messages results in very significant - slowdown of the system. - - When reporting bugs, please try to have available a full dump of - debugging messages while the misbehaviour was occurring. - -config NTFS_RW - bool "NTFS write support" - depends on NTFS_FS - help - This enables the partial, but safe, write support in the NTFS driver. - - The only supported operation is overwriting existing files, without - changing the file length. No file or directory creation, deletion or - renaming is possible. Note only non-resident files can be written to - so you may find that some very small files (<500 bytes or so) cannot - be written to. - - While we cannot guarantee that it will not damage any data, we have - so far not received a single report where the driver would have - damaged someones data so we assume it is perfectly safe to use. - - Note: While write support is safe in this version (a rewrite from - scratch of the NTFS support), it should be noted that the old NTFS - write support, included in Linux 2.5.10 and before (since 1997), - is not safe. - - This is currently useful with TopologiLinux. TopologiLinux is run - on top of any DOS/Microsoft Windows system without partitioning your - hard disk. Unlike other Linux distributions TopologiLinux does not - need its own partition. For more information see - <http://topologi-linux.sourceforge.net/> - - It is perfectly safe to say N here. +source "fs/fat/Kconfig" +source "fs/ntfs/Kconfig" endmenu endif # BLOCK @@ -662,30 +141,7 @@ endif # BLOCK menu "Pseudo filesystems" source "fs/proc/Kconfig" - -config SYSFS - bool "sysfs file system support" if EMBEDDED - default y - help - The sysfs filesystem is a virtual filesystem that the kernel uses to - export internal kernel objects, their attributes, and their - relationships to one another. - - Users can use sysfs to ascertain useful information about the running - kernel, such as the devices the kernel has discovered on each bus and - which driver each is bound to. sysfs can also be used to tune devices - and other kernel subsystems. - - Some system agents rely on the information in sysfs to operate. - /sbin/hotplug uses device and object attributes in sysfs to assist in - delegating policy decisions, like persistently naming devices. - - sysfs is currently used by the block subsystem to mount the root - partition. If sysfs is disabled you must specify the boot device on - the kernel boot command line via its major and minor numbers. For - example, "root=03:01" for /dev/hda1. - - Designers of embedded systems may wish to say N here to conserve space. +source "fs/sysfs/Kconfig" config TMPFS bool "Virtual memory file system support (former shm fs)" @@ -726,17 +182,7 @@ config HUGETLBFS config HUGETLB_PAGE def_bool HUGETLBFS -config CONFIGFS_FS - tristate "Userspace-driven configuration filesystem" - depends on SYSFS - help - configfs is a ram-based filesystem that provides the converse - of sysfs's functionality. Where sysfs is a filesystem-based - view of kernel objects, configfs is a filesystem-based manager - of kernel objects, or config_items. - - Both sysfs and configfs can and should exist together on the - same system. One is not a replacement for the other. +source "fs/configfs/Kconfig" endmenu @@ -755,425 +201,27 @@ menuconfig MISC_FILESYSTEMS if MISC_FILESYSTEMS -config ADFS_FS - tristate "ADFS file system support (EXPERIMENTAL)" - depends on BLOCK && EXPERIMENTAL - help - The Acorn Disc Filing System is the standard file system of the - RiscOS operating system which runs on Acorn's ARM-based Risc PC - systems and the Acorn Archimedes range of machines. If you say Y - here, Linux will be able to read from ADFS partitions on hard drives - and from ADFS-formatted floppy discs. If you also want to be able to - write to those devices, say Y to "ADFS write support" below. - - The ADFS partition should be the first partition (i.e., - /dev/[hs]d?1) on each of your drives. Please read the file - <file:Documentation/filesystems/adfs.txt> for further details. - - To compile this code as a module, choose M here: the module will be - called adfs. - - If unsure, say N. - -config ADFS_FS_RW - bool "ADFS write support (DANGEROUS)" - depends on ADFS_FS - help - If you say Y here, you will be able to write to ADFS partitions on - hard drives and ADFS-formatted floppy disks. This is experimental - codes, so if you're unsure, say N. - -config AFFS_FS - tristate "Amiga FFS file system support (EXPERIMENTAL)" - depends on BLOCK && EXPERIMENTAL - help - The Fast File System (FFS) is the common file system used on hard - disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20). Say Y - if you want to be able to read and write files from and to an Amiga - FFS partition on your hard drive. Amiga floppies however cannot be - read with this driver due to an incompatibility of the floppy - controller used in an Amiga and the standard floppy controller in - PCs and workstations. Read <file:Documentation/filesystems/affs.txt> - and <file:fs/affs/Changes>. - - With this driver you can also mount disk files used by Bernd - Schmidt's Un*X Amiga Emulator - (<http://www.freiburg.linux.de/~uae/>). - If you want to do this, you will also need to say Y or M to "Loop - device support", above. - - To compile this file system support as a module, choose M here: the - module will be called affs. If unsure, say N. - -config ECRYPT_FS - tristate "eCrypt filesystem layer support (EXPERIMENTAL)" - depends on EXPERIMENTAL && KEYS && CRYPTO && NET - help - Encrypted filesystem that operates on the VFS layer. See - <file:Documentation/filesystems/ecryptfs.txt> to learn more about - eCryptfs. Userspace components are required and can be - obtained from <http://ecryptfs.sf.net>. - - To compile this file system support as a module, choose M here: the - module will be called ecryptfs. - -config HFS_FS - tristate "Apple Macintosh file system support (EXPERIMENTAL)" - depends on BLOCK && EXPERIMENTAL - select NLS - help - If you say Y here, you will be able to mount Macintosh-formatted - floppy disks and hard drive partitions with full read-write access. - Please read <file:Documentation/filesystems/hfs.txt> to learn about - the available mount options. - - To compile this file system support as a module, choose M here: the - module will be called hfs. - -config HFSPLUS_FS - tristate "Apple Extended HFS file system support" - depends on BLOCK - select NLS - select NLS_UTF8 - help - If you say Y here, you will be able to mount extended format - Macintosh-formatted hard drive partitions with full read-write access. - - This file system is often called HFS+ and was introduced with - MacOS 8. It includes all Mac specific filesystem data such as - data forks and creator codes, but it also has several UNIX - style features such as file ownership and permissions. - -config BEFS_FS - tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)" - depends on BLOCK && EXPERIMENTAL - select NLS - help - The BeOS File System (BeFS) is the native file system of Be, Inc's - BeOS. Notable features include support for arbitrary attributes - on files and directories, and database-like indices on selected - attributes. (Also note that this driver doesn't make those features - available at this time). It is a 64 bit filesystem, so it supports - extremely large volumes and files. - - If you use this filesystem, you should also say Y to at least one - of the NLS (native language support) options below. - - If you don't know what this is about, say N. - - To compile this as a module, choose M here: the module will be - called befs. - -config BEFS_DEBUG - bool "Debug BeFS" - depends on BEFS_FS - help - If you say Y here, you can use the 'debug' mount option to enable - debugging output from the driver. - -config BFS_FS - tristate "BFS file system support (EXPERIMENTAL)" - depends on BLOCK && EXPERIMENTAL - help - Boot File System (BFS) is a file system used under SCO UnixWare to - allow the bootloader access to the kernel image and other important - files during the boot process. It is usually mounted under /stand - and corresponds to the slice marked as "STAND" in the UnixWare - partition. You should say Y if you want to read or write the files - on your /stand slice from within Linux. You then also need to say Y - to "UnixWare slices support", below. More information about the BFS - file system is contained in the file - <file:Documentation/filesystems/bfs.txt>. - - If you don't know what this is about, say N. - - To compile this as a module, choose M here: the module will be called - bfs. Note that the file system of your root partition (the one - containing the directory /) cannot be compiled as a module. - - - -config EFS_FS - tristate "EFS file system support (read only) (EXPERIMENTAL)" - depends on BLOCK && EXPERIMENTAL - help - EFS is an older file system used for non-ISO9660 CD-ROMs and hard - disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer - uses the XFS file system for hard disk partitions however). - - This implementation only offers read-only access. If you don't know - what all this is about, it's safe to say N. For more information - about EFS see its home page at <http://aeschi.ch.eu.org/efs/>. - - To compile the EFS file system support as a module, choose M here: the - module will be called efs. - +source "fs/adfs/Kconfig" +source "fs/affs/Kconfig" +source "fs/ecryptfs/Kconfig" +source "fs/hfs/Kconfig" +source "fs/hfsplus/Kconfig" +source "fs/befs/Kconfig" +source "fs/bfs/Kconfig" +source "fs/efs/Kconfig" source "fs/jffs2/Kconfig" # UBIFS File system configuration source "fs/ubifs/Kconfig" - -config CRAMFS - tristate "Compressed ROM file system support (cramfs)" - depends on BLOCK - select ZLIB_INFLATE - help - Saying Y here includes support for CramFs (Compressed ROM File - System). CramFs is designed to be a simple, small, and compressed - file system for ROM based embedded systems. CramFs is read-only, - limited to 256MB file systems (with 16MB files), and doesn't support - 16/32 bits uid/gid, hard links and timestamps. - - See <file:Documentation/filesystems/cramfs.txt> and - <file:fs/cramfs/README> for further information. - - To compile this as a module, choose M here: the module will be called - cramfs. Note that the root file system (the one containing the - directory /) cannot be compiled as a module. - - If unsure, say N. - -config SQUASHFS - tristate "SquashFS 4.0 - Squashed file system support" - depends on BLOCK - select ZLIB_INFLATE - help - Saying Y here includes support for SquashFS 4.0 (a Compressed - Read-Only File System). Squashfs is a highly compressed read-only - filesystem for Linux. It uses zlib compression to compress both - files, inodes and directories. Inodes in the system are very small - and all blocks are packed to minimise data overhead. Block sizes - greater than 4K are supported up to a maximum of 1 Mbytes (default - block size 128K). SquashFS 4.0 supports 64 bit filesystems and files - (larger than 4GB), full uid/gid information, hard links and - timestamps. - - Squashfs is intended for general read-only filesystem use, for - archival use (i.e. in cases where a .tar.gz file may be used), and in - embedded systems where low overhead is needed. Further information - and tools are available from http://squashfs.sourceforge.net. - - If you want to compile this as a module ( = code which can be - inserted in and removed from the running kernel whenever you want), - say M here and read <file:Documentation/modules.txt>. The module - will be called squashfs. Note that the root file system (the one - containing the directory /) cannot be compiled as a module. - - If unsure, say N. - -config SQUASHFS_EMBEDDED - - bool "Additional option for memory-constrained systems" - depends on SQUASHFS - default n - help - Saying Y here allows you to specify cache size. - - If unsure, say N. - -config SQUASHFS_FRAGMENT_CACHE_SIZE - int "Number of fragments cached" if SQUASHFS_EMBEDDED - depends on SQUASHFS - default "3" - help - By default SquashFS caches the last 3 fragments read from - the filesystem. Increasing this amount may mean SquashFS - has to re-read fragments less often from disk, at the expense - of extra system memory. Decreasing this amount will mean - SquashFS uses less memory at the expense of extra reads from disk. - - Note there must be at least one cached fragment. Anything - much more than three will probably not make much difference. - -config VXFS_FS - tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)" - depends on BLOCK - help - FreeVxFS is a file system driver that support the VERITAS VxFS(TM) - file system format. VERITAS VxFS(TM) is the standard file system - of SCO UnixWare (and possibly others) and optionally available - for Sunsoft Solaris, HP-UX and many other operating systems. - Currently only readonly access is supported. - - NOTE: the file system type as used by mount(1), mount(2) and - fstab(5) is 'vxfs' as it describes the file system format, not - the actual driver. - - To compile this as a module, choose M here: the module will be - called freevxfs. If unsure, say N. - -config MINIX_FS - tristate "Minix file system support" - depends on BLOCK - help - Minix is a simple operating system used in many classes about OS's. - The minix file system (method to organize files on a hard disk - partition or a floppy disk) was the original file system for Linux, - but has been superseded by the second extended file system ext2fs. - You don't want to use the minix file system on your hard disk - because of certain built-in restrictions, but it is sometimes found - on older Linux floppy disks. This option will enlarge your kernel - by about 28 KB. If unsure, say N. - - To compile this file system support as a module, choose M here: the - module will be called minix. Note that the file system of your root - partition (the one containing the directory /) cannot be compiled as - a module. - -config OMFS_FS - tristate "SonicBlue Optimized MPEG File System support" - depends on BLOCK - select CRC_ITU_T - help - This is the proprietary file system used by the Rio Karma music - player and ReplayTV DVR. Despite the name, this filesystem is not - more efficient than a standard FS for MPEG files, in fact likely - the opposite is true. Say Y if you have either of these devices - and wish to mount its disk. - - To compile this file system support as a module, choose M here: the - module will be called omfs. If unsure, say N. - -config HPFS_FS - tristate "OS/2 HPFS file system support" - depends on BLOCK - help - OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS - is the file system used for organizing files on OS/2 hard disk - partitions. Say Y if you want to be able to read files from and - write files to an OS/2 HPFS partition on your hard drive. OS/2 - floppies however are in regular MSDOS format, so you don't need this - option in order to be able to read them. Read - <file:Documentation/filesystems/hpfs.txt>. - - To compile this file system support as a module, choose M here: the - module will be called hpfs. If unsure, say N. - - -config QNX4FS_FS - tristate "QNX4 file system support (read only)" - depends on BLOCK - help - This is the file system used by the real-time operating systems - QNX 4 and QNX 6 (the latter is also called QNX RTP). - Further information is available at <http://www.qnx.com/>. - Say Y if you intend to mount QNX hard disks or floppies. - Unless you say Y to "QNX4FS read-write support" below, you will - only be able to read these file systems. - - To compile this file system support as a module, choose M here: the - module will be called qnx4. - - If you don't know whether you need it, then you don't need it: - answer N. - -config QNX4FS_RW - bool "QNX4FS write support (DANGEROUS)" - depends on QNX4FS_FS && EXPERIMENTAL && BROKEN - help - Say Y if you want to test write support for QNX4 file systems. - - It's currently broken, so for now: - answer N. - -config ROMFS_FS - tristate "ROM file system support" - depends on BLOCK - ---help--- - This is a very small read-only file system mainly intended for - initial ram disks of installation disks, but it could be used for - other read-only media as well. Read - <file:Documentation/filesystems/romfs.txt> for details. - - To compile this file system support as a module, choose M here: the - module will be called romfs. Note that the file system of your - root partition (the one containing the directory /) cannot be a - module. - - If you don't know whether you need it, then you don't need it: - answer N. - - -config SYSV_FS - tristate "System V/Xenix/V7/Coherent file system support" - depends on BLOCK - help - SCO, Xenix and Coherent are commercial Unix systems for Intel - machines, and Version 7 was used on the DEC PDP-11. Saying Y - here would allow you to read from their floppies and hard disk - partitions. - - If you have floppies or hard disk partitions like that, it is likely - that they contain binaries from those other Unix systems; in order - to run these binaries, you will want to install linux-abi which is - a set of kernel modules that lets you run SCO, Xenix, Wyse, - UnixWare, Dell Unix and System V programs under Linux. It is - available via FTP (user: ftp) from - <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>). - NOTE: that will work only for binaries from Intel-based systems; - PDP ones will have to wait until somebody ports Linux to -11 ;-) - - If you only intend to mount files from some other Unix over the - network using NFS, you don't need the System V file system support - (but you need NFS file system support obviously). - - Note that this option is generally not needed for floppies, since a - good portable way to transport files and directories between unixes - (and even other operating systems) is given by the tar program ("man - tar" or preferably "info tar"). Note also that this option has - nothing whatsoever to do with the option "System V IPC". Read about - the System V file system in - <file:Documentation/filesystems/sysv-fs.txt>. - Saying Y here will enlarge your kernel by about 27 KB. - - To compile this as a module, choose M here: the module will be called - sysv. - - If you haven't heard about all of this before, it's safe to say N. - - -config UFS_FS - tristate "UFS file system support (read only)" - depends on BLOCK - help - BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD, - OpenBSD and NeXTstep) use a file system called UFS. Some System V - Unixes can create and mount hard disk partitions and diskettes using - this file system as well. Saying Y here will allow you to read from - these partitions; if you also want to write to them, say Y to the - experimental "UFS file system write support", below. Please read the - file <file:Documentation/filesystems/ufs.txt> for more information. - - The recently released UFS2 variant (used in FreeBSD 5.x) is - READ-ONLY supported. - - Note that this option is generally not needed for floppies, since a - good portable way to transport files and directories between unixes - (and even other operating systems) is given by the tar program ("man - tar" or preferably "info tar"). - - When accessing NeXTstep files, you may need to convert them from the - NeXT character set to the Latin1 character set; use the program - recode ("info recode") for this purpose. - - To compile the UFS file system support as a module, choose M here: the - module will be called ufs. - - If you haven't heard about all of this before, it's safe to say N. - -config UFS_FS_WRITE - bool "UFS file system write support (DANGEROUS)" - depends on UFS_FS && EXPERIMENTAL - help - Say Y here if you want to try writing to UFS partitions. This is - experimental, so you should back up your UFS partitions beforehand. - -config UFS_DEBUG - bool "UFS debugging" - depends on UFS_FS - help - If you are experiencing any problems with the UFS filesystem, say - Y here. This will result in _many_ additional debugging messages to be - written to the system log. +source "fs/cramfs/Kconfig" +source "fs/squashfs/Kconfig" +source "fs/freevxfs/Kconfig" +source "fs/minix/Kconfig" +source "fs/omfs/Kconfig" +source "fs/hpfs/Kconfig" +source "fs/qnx4/Kconfig" +source "fs/romfs/Kconfig" +source "fs/sysv/Kconfig" +source "fs/ufs/Kconfig" endif # MISC_FILESYSTEMS @@ -1193,173 +241,8 @@ menuconfig NETWORK_FILESYSTEMS if NETWORK_FILESYSTEMS -config NFS_FS - tristate "NFS client support" - depends on INET - select LOCKD - select SUNRPC - select NFS_ACL_SUPPORT if NFS_V3_ACL - help - Choose Y here if you want to access files residing on other - computers using Sun's Network File System protocol. To compile - this file system support as a module, choose M here: the module - will be called nfs. - - To mount file systems exported by NFS servers, you also need to - install the user space mount.nfs command which can be found in - the Linux nfs-utils package, available from http://linux-nfs.org/. - Information about using the mount command is available in the - mount(8) man page. More detail about the Linux NFS client - implementation is available via the nfs(5) man page. - - Below you can choose which versions of the NFS protocol are - available in the kernel to mount NFS servers. Support for NFS - version 2 (RFC 1094) is always available when NFS_FS is selected. - - To configure a system which mounts its root file system via NFS - at boot time, say Y here, select "Kernel level IP - autoconfiguration" in the NETWORK menu, and select "Root file - system on NFS" below. You cannot compile this file system as a - module in this case. - - If unsure, say N. - -config NFS_V3 - bool "NFS client support for NFS version 3" - depends on NFS_FS - help - This option enables support for version 3 of the NFS protocol - (RFC 1813) in the kernel's NFS client. - - If unsure, say Y. - -config NFS_V3_ACL - bool "NFS client support for the NFSv3 ACL protocol extension" - depends on NFS_V3 - help - Some NFS servers support an auxiliary NFSv3 ACL protocol that - Sun added to Solaris but never became an official part of the - NFS version 3 protocol. This protocol extension allows - applications on NFS clients to manipulate POSIX Access Control - Lists on files residing on NFS servers. NFS servers enforce - ACLs on local files whether this protocol is available or not. - - Choose Y here if your NFS server supports the Solaris NFSv3 ACL - protocol extension and you want your NFS client to allow - applications to access and modify ACLs on files on the server. - - Most NFS servers don't support the Solaris NFSv3 ACL protocol - extension. You can choose N here or specify the "noacl" mount - option to prevent your NFS client from trying to use the NFSv3 - ACL protocol. - - If unsure, say N. - -config NFS_V4 - bool "NFS client support for NFS version 4 (EXPERIMENTAL)" - depends on NFS_FS && EXPERIMENTAL - select RPCSEC_GSS_KRB5 - help - This option enables support for version 4 of the NFS protocol - (RFC 3530) in the kernel's NFS client. - - To mount NFS servers using NFSv4, you also need to install user - space programs which can be found in the Linux nfs-utils package, - available from http://linux-nfs.org/. - - If unsure, say N. - -config ROOT_NFS - bool "Root file system on NFS" - depends on NFS_FS=y && IP_PNP - help - If you want your system to mount its root file system via NFS, - choose Y here. This is common practice for managing systems - without local permanent storage. For details, read - <file:Documentation/filesystems/nfsroot.txt>. - - Most people say N here. - -config NFSD - tristate "NFS server support" - depends on INET - select LOCKD - select SUNRPC - select EXPORTFS - select NFS_ACL_SUPPORT if NFSD_V2_ACL - help - Choose Y here if you want to allow other computers to access - files residing on this system using Sun's Network File System - protocol. To compile the NFS server support as a module, - choose M here: the module will be called nfsd. - - You may choose to use a user-space NFS server instead, in which - case you can choose N here. - - To export local file systems using NFS, you also need to install - user space programs which can be found in the Linux nfs-utils - package, available from http://linux-nfs.org/. More detail about - the Linux NFS server implementation is available via the - exports(5) man page. - - Below you can choose which versions of the NFS protocol are - available to clients mounting the NFS server on this system. - Support for NFS version 2 (RFC 1094) is always available when - CONFIG_NFSD is selected. - - If unsure, say N. - -config NFSD_V2_ACL - bool - depends on NFSD - -config NFSD_V3 - bool "NFS server support for NFS version 3" - depends on NFSD - help - This option enables support in your system's NFS server for - version 3 of the NFS protocol (RFC 1813). - - If unsure, say Y. - -config NFSD_V3_ACL - bool "NFS server support for the NFSv3 ACL protocol extension" - depends on NFSD_V3 - select NFSD_V2_ACL - help - Solaris NFS servers support an auxiliary NFSv3 ACL protocol that - never became an official part of the NFS version 3 protocol. - This protocol extension allows applications on NFS clients to - manipulate POSIX Access Control Lists on files residing on NFS - servers. NFS servers enforce POSIX ACLs on local files whether - this protocol is available or not. - - This option enables support in your system's NFS server for the - NFSv3 ACL protocol extension allowing NFS clients to manipulate - POSIX ACLs on files exported by your system's NFS server. NFS - clients which support the Solaris NFSv3 ACL protocol can then - access and modify ACLs on your NFS server. - - To store ACLs on your NFS server, you also need to enable ACL- - related CONFIG options for your local file systems of choice. - - If unsure, say N. - -config NFSD_V4 - bool "NFS server support for NFS version 4 (EXPERIMENTAL)" - depends on NFSD && PROC_FS && EXPERIMENTAL - select NFSD_V3 - select FS_POSIX_ACL - select RPCSEC_GSS_KRB5 - help - This option enables support in your system's NFS server for - version 4 of the NFS protocol (RFC 3530). - - To export files using NFSv4, you need to install additional user - space programs which can be found in the Linux nfs-utils package, - available from http://linux-nfs.org/. - - If unsure, say N. +source "fs/nfs/Kconfig" +source "fs/nfsd/Kconfig" config LOCKD tristate @@ -1381,221 +264,13 @@ config NFS_COMMON depends on NFSD || NFS_FS default y -config SUNRPC - tristate - -config SUNRPC_GSS - tristate - -config SUNRPC_XPRT_RDMA - tristate - depends on SUNRPC && INFINIBAND && EXPERIMENTAL - default SUNRPC && INFINIBAND - help - This option enables an RPC client transport capability that - allows the NFS client to mount servers via an RDMA-enabled - transport. - - To compile RPC client RDMA transport support as a module, - choose M here: the module will be called xprtrdma. - - If unsure, say N. - -config SUNRPC_REGISTER_V4 - bool "Register local RPC services via rpcbind v4 (EXPERIMENTAL)" - depends on SUNRPC && EXPERIMENTAL - default n - help - Sun added support for registering RPC services at an IPv6 - address by creating two new versions of the rpcbind protocol - (RFC 1833). - - This option enables support in the kernel RPC server for - registering kernel RPC services via version 4 of the rpcbind - protocol. If you enable this option, you must run a portmapper - daemon that supports rpcbind protocol version 4. - - Serving NFS over IPv6 from knfsd (the kernel's NFS server) - requires that you enable this option and use a portmapper that - supports rpcbind version 4. - - If unsure, say N to get traditional behavior (register kernel - RPC services using only rpcbind version 2). Distributions - using the legacy Linux portmapper daemon must say N here. - -config RPCSEC_GSS_KRB5 - tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)" - depends on SUNRPC && EXPERIMENTAL - select SUNRPC_GSS - select CRYPTO - select CRYPTO_MD5 - select CRYPTO_DES - select CRYPTO_CBC - help - Choose Y here to enable Secure RPC using the Kerberos version 5 - GSS-API mechanism (RFC 1964). - - Secure RPC calls with Kerberos require an auxiliary user-space - daemon which may be found in the Linux nfs-utils package - available from http://linux-nfs.org/. In addition, user-space - Kerberos support should be installed. - - If unsure, say N. - -config RPCSEC_GSS_SPKM3 - tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)" - depends on SUNRPC && EXPERIMENTAL - select SUNRPC_GSS - select CRYPTO - select CRYPTO_MD5 - select CRYPTO_DES - select CRYPTO_CAST5 - select CRYPTO_CBC - help - Choose Y here to enable Secure RPC using the SPKM3 public key - GSS-API mechansim (RFC 2025). - - Secure RPC calls with SPKM3 require an auxiliary userspace - daemon which may be found in the Linux nfs-utils package - available from http://linux-nfs.org/. - - If unsure, say N. - -config SMB_FS - tristate "SMB file system support (OBSOLETE, please use CIFS)" - depends on INET - select NLS - help - SMB (Server Message Block) is the protocol Windows for Workgroups - (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share - files and printers over local networks. Saying Y here allows you to - mount their file systems (often called "shares" in this context) and - access them just like any other Unix directory. Currently, this - works only if the Windows machines use TCP/IP as the underlying - transport protocol, and not NetBEUI. For details, read - <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO, - available from <http://www.tldp.org/docs.html#howto>. - - Note: if you just want your box to act as an SMB *server* and make - files and printing services available to Windows clients (which need - to have a TCP/IP stack), you don't need to say Y here; you can use - the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>) - for that. - - General information about how to connect Linux, Windows machines and - Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. - - To compile the SMB support as a module, choose M here: - the module will be called smbfs. Most people say N, however. - -config SMB_NLS_DEFAULT - bool "Use a default NLS" - depends on SMB_FS - help - Enabling this will make smbfs use nls translations by default. You - need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls - settings and you need to give the default nls for the SMB server as - CONFIG_SMB_NLS_REMOTE. - - The nls settings can be changed at mount time, if your smbmount - supports that, using the codepage and iocharset parameters. - - smbmount from samba 2.2.0 or later supports this. - -config SMB_NLS_REMOTE - string "Default Remote NLS Option" - depends on SMB_NLS_DEFAULT - default "cp437" - help - This setting allows you to specify a default value for which - codepage the server uses. If this field is left blank no - translations will be done by default. The local codepage/charset - default to CONFIG_NLS_DEFAULT. - - The nls settings can be changed at mount time, if your smbmount - supports that, using the codepage and iocharset parameters. - - smbmount from samba 2.2.0 or later supports this. - +source "net/sunrpc/Kconfig" +source "fs/smbfs/Kconfig" source "fs/cifs/Kconfig" - -config NCP_FS - tristate "NCP file system support (to mount NetWare volumes)" - depends on IPX!=n || INET - help - NCP (NetWare Core Protocol) is a protocol that runs over IPX and is - used by Novell NetWare clients to talk to file servers. It is to - IPX what NFS is to TCP/IP, if that helps. Saying Y here allows you - to mount NetWare file server volumes and to access them just like - any other Unix directory. For details, please read the file - <file:Documentation/filesystems/ncpfs.txt> in the kernel source and - the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>. - - You do not have to say Y here if you want your Linux box to act as a - file *server* for Novell NetWare clients. - - General information about how to connect Linux, Windows machines and - Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. - - To compile this as a module, choose M here: the module will be called - ncpfs. Say N unless you are connected to a Novell network. - source "fs/ncpfs/Kconfig" - -config CODA_FS - tristate "Coda file system support (advanced network fs)" - depends on INET - help - Coda is an advanced network file system, similar to NFS in that it - enables you to mount file systems of a remote server and access them - with regular Unix commands as if they were sitting on your hard - disk. Coda has several advantages over NFS: support for - disconnected operation (e.g. for laptops), read/write server - replication, security model for authentication and encryption, - persistent client caches and write back caching. - - If you say Y here, your Linux box will be able to act as a Coda - *client*. You will need user level code as well, both for the - client and server. Servers are currently user level, i.e. they need - no kernel support. Please read - <file:Documentation/filesystems/coda.txt> and check out the Coda - home page <http://www.coda.cs.cmu.edu/>. - - To compile the coda client support as a module, choose M here: the - module will be called coda. - -config AFS_FS - tristate "Andrew File System support (AFS) (EXPERIMENTAL)" - depends on INET && EXPERIMENTAL - select AF_RXRPC - help - If you say Y here, you will get an experimental Andrew File System - driver. It currently only supports unsecured read-only AFS access. - - See <file:Documentation/filesystems/afs.txt> for more information. - - If unsure, say N. - -config AFS_DEBUG - bool "AFS dynamic debugging" - depends on AFS_FS - help - Say Y here to make runtime controllable debugging messages appear. - - See <file:Documentation/filesystems/afs.txt> for more information. - - If unsure, say N. - -config 9P_FS - tristate "Plan 9 Resource Sharing Support (9P2000) (Experimental)" - depends on INET && NET_9P && EXPERIMENTAL - help - If you say Y here, you will get experimental support for - Plan 9 resource sharing via the 9P2000 protocol. - - See <http://v9fs.sf.net> for more information. - - If unsure, say N. +source "fs/coda/Kconfig" +source "fs/afs/Kconfig" +source "fs/9p/Kconfig" endif # NETWORK_FILESYSTEMS diff --git a/fs/adfs/Kconfig b/fs/adfs/Kconfig new file mode 100644 index 00000000000..e55182a7460 --- /dev/null +++ b/fs/adfs/Kconfig @@ -0,0 +1,27 @@ +config ADFS_FS + tristate "ADFS file system support (EXPERIMENTAL)" + depends on BLOCK && EXPERIMENTAL + help + The Acorn Disc Filing System is the standard file system of the + RiscOS operating system which runs on Acorn's ARM-based Risc PC + systems and the Acorn Archimedes range of machines. If you say Y + here, Linux will be able to read from ADFS partitions on hard drives + and from ADFS-formatted floppy discs. If you also want to be able to + write to those devices, say Y to "ADFS write support" below. + + The ADFS partition should be the first partition (i.e., + /dev/[hs]d?1) on each of your drives. Please read the file + <file:Documentation/filesystems/adfs.txt> for further details. + + To compile this code as a module, choose M here: the module will be + called adfs. + + If unsure, say N. + +config ADFS_FS_RW + bool "ADFS write support (DANGEROUS)" + depends on ADFS_FS + help + If you say Y here, you will be able to write to ADFS partitions on + hard drives and ADFS-formatted floppy disks. This is experimental + codes, so if you're unsure, say N. diff --git a/fs/affs/Kconfig b/fs/affs/Kconfig new file mode 100644 index 00000000000..cfad9afb476 --- /dev/null +++ b/fs/affs/Kconfig @@ -0,0 +1,21 @@ +config AFFS_FS + tristate "Amiga FFS file system support (EXPERIMENTAL)" + depends on BLOCK && EXPERIMENTAL + help + The Fast File System (FFS) is the common file system used on hard + disks by Amiga(tm) systems since AmigaOS Version 1.3 (34.20). Say Y + if you want to be able to read and write files from and to an Amiga + FFS partition on your hard drive. Amiga floppies however cannot be + read with this driver due to an incompatibility of the floppy + controller used in an Amiga and the standard floppy controller in + PCs and workstations. Read <file:Documentation/filesystems/affs.txt> + and <file:fs/affs/Changes>. + + With this driver you can also mount disk files used by Bernd + Schmidt's Un*X Amiga Emulator + (<http://www.freiburg.linux.de/~uae/>). + If you want to do this, you will also need to say Y or M to "Loop + device support", above. + + To compile this file system support as a module, choose M here: the + module will be called affs. If unsure, say N. diff --git a/fs/afs/Kconfig b/fs/afs/Kconfig new file mode 100644 index 00000000000..e7b522fe15e --- /dev/null +++ b/fs/afs/Kconfig @@ -0,0 +1,21 @@ +config AFS_FS + tristate "Andrew File System support (AFS) (EXPERIMENTAL)" + depends on INET && EXPERIMENTAL + select AF_RXRPC + help + If you say Y here, you will get an experimental Andrew File System + driver. It currently only supports unsecured read-only AFS access. + + See <file:Documentation/filesystems/afs.txt> for more information. + + If unsure, say N. + +config AFS_DEBUG + bool "AFS dynamic debugging" + depends on AFS_FS + help + Say Y here to make runtime controllable debugging messages appear. + + See <file:Documentation/filesystems/afs.txt> for more information. + + If unsure, say N. diff --git a/fs/autofs/Kconfig b/fs/autofs/Kconfig new file mode 100644 index 00000000000..5f3bea90911 --- /dev/null +++ b/fs/autofs/Kconfig @@ -0,0 +1,21 @@ +config AUTOFS_FS + tristate "Kernel automounter support" + help + The automounter is a tool to automatically mount remote file systems + on demand. This implementation is partially kernel-based to reduce + overhead in the already-mounted case; this is unlike the BSD + automounter (amd), which is a pure user space daemon. + + To use the automounter you need the user-space tools from the autofs + package; you can find the location in <file:Documentation/Changes>. + You also want to answer Y to "NFS file system support", below. + + If you want to use the newer version of the automounter with more + features, say N here and say Y to "Kernel automounter v4 support", + below. + + To compile this support as a module, choose M here: the module will be + called autofs. + + If you are not a part of a fairly large, distributed network, you + probably do not need an automounter, and can say N here. diff --git a/fs/autofs4/Kconfig b/fs/autofs4/Kconfig new file mode 100644 index 00000000000..1204d6384d3 --- /dev/null +++ b/fs/autofs4/Kconfig @@ -0,0 +1,20 @@ +config AUTOFS4_FS + tristate "Kernel automounter version 4 support (also supports v3)" + help + The automounter is a tool to automatically mount remote file systems + on demand. This implementation is partially kernel-based to reduce + overhead in the already-mounted case; this is unlike the BSD + automounter (amd), which is a pure user space daemon. + + To use the automounter you need the user-space tools from + <ftp://ftp.kernel.org/pub/linux/daemons/autofs/v4/>; you also + want to answer Y to "NFS file system support", below. + + To compile this support as a module, choose M here: the module will be + called autofs4. You will need to add "alias autofs autofs4" to your + modules configuration file. + + If you are not a part of a fairly large, distributed network or + don't have a laptop which needs to dynamically reconfigure to the + local network, you probably do not need an automounter, and can say + N here. diff --git a/fs/befs/Kconfig b/fs/befs/Kconfig new file mode 100644 index 00000000000..7835d30f211 --- /dev/null +++ b/fs/befs/Kconfig @@ -0,0 +1,26 @@ +config BEFS_FS + tristate "BeOS file system (BeFS) support (read only) (EXPERIMENTAL)" + depends on BLOCK && EXPERIMENTAL + select NLS + help + The BeOS File System (BeFS) is the native file system of Be, Inc's + BeOS. Notable features include support for arbitrary attributes + on files and directories, and database-like indices on selected + attributes. (Also note that this driver doesn't make those features + available at this time). It is a 64 bit filesystem, so it supports + extremely large volumes and files. + + If you use this filesystem, you should also say Y to at least one + of the NLS (native language support) options below. + + If you don't know what this is about, say N. + + To compile this as a module, choose M here: the module will be + called befs. + +config BEFS_DEBUG + bool "Debug BeFS" + depends on BEFS_FS + help + If you say Y here, you can use the 'debug' mount option to enable + debugging output from the driver. diff --git a/fs/bfs/Kconfig b/fs/bfs/Kconfig new file mode 100644 index 00000000000..c2336c62024 --- /dev/null +++ b/fs/bfs/Kconfig @@ -0,0 +1,19 @@ +config BFS_FS + tristate "BFS file system support (EXPERIMENTAL)" + depends on BLOCK && EXPERIMENTAL + help + Boot File System (BFS) is a file system used under SCO UnixWare to + allow the bootloader access to the kernel image and other important + files during the boot process. It is usually mounted under /stand + and corresponds to the slice marked as "STAND" in the UnixWare + partition. You should say Y if you want to read or write the files + on your /stand slice from within Linux. You then also need to say Y + to "UnixWare slices support", below. More information about the BFS + file system is contained in the file + <file:Documentation/filesystems/bfs.txt>. + + If you don't know what this is about, say N. + + To compile this as a module, choose M here: the module will be called + bfs. Note that the file system of your root partition (the one + containing the directory /) cannot be compiled as a module. diff --git a/fs/btrfs/Kconfig b/fs/btrfs/Kconfig new file mode 100644 index 00000000000..f8fcf999ea1 --- /dev/null +++ b/fs/btrfs/Kconfig @@ -0,0 +1,18 @@ +config BTRFS_FS + tristate "Btrfs filesystem (EXPERIMENTAL) Unstable disk format" + depends on EXPERIMENTAL + select LIBCRC32C + select ZLIB_INFLATE + select ZLIB_DEFLATE + help + Btrfs is a new filesystem with extents, writable snapshotting, + support for multiple devices and many more features. + + Btrfs is highly experimental, and THE DISK FORMAT IS NOT YET + FINALIZED. You should say N here unless you are interested in + testing Btrfs with non-critical data. + + To compile this file system support as a module, choose M here. The + module will be called btrfs. + + If unsure, say N. diff --git a/fs/coda/Kconfig b/fs/coda/Kconfig new file mode 100644 index 00000000000..c0e5a7fad06 --- /dev/null +++ b/fs/coda/Kconfig @@ -0,0 +1,21 @@ +config CODA_FS + tristate "Coda file system support (advanced network fs)" + depends on INET + help + Coda is an advanced network file system, similar to NFS in that it + enables you to mount file systems of a remote server and access them + with regular Unix commands as if they were sitting on your hard + disk. Coda has several advantages over NFS: support for + disconnected operation (e.g. for laptops), read/write server + replication, security model for authentication and encryption, + persistent client caches and write back caching. + + If you say Y here, your Linux box will be able to act as a Coda + *client*. You will need user level code as well, both for the + client and server. Servers are currently user level, i.e. they need + no kernel support. Please read + <file:Documentation/filesystems/coda.txt> and check out the Coda + home page <http://www.coda.cs.cmu.edu/>. + + To compile the coda client support as a module, choose M here: the + module will be called coda. diff --git a/fs/configfs/Kconfig b/fs/configfs/Kconfig new file mode 100644 index 00000000000..13587cc97a0 --- /dev/null +++ b/fs/configfs/Kconfig @@ -0,0 +1,11 @@ +config CONFIGFS_FS + tristate "Userspace-driven configuration filesystem" + depends on SYSFS + help + configfs is a ram-based filesystem that provides the converse + of sysfs's functionality. Where sysfs is a filesystem-based + view of kernel objects, configfs is a filesystem-based manager + of kernel objects, or config_items. + + Both sysfs and configfs can and should exist together on the + same system. One is not a replacement for the other. diff --git a/fs/cramfs/Kconfig b/fs/cramfs/Kconfig new file mode 100644 index 00000000000..cd06466f365 --- /dev/null +++ b/fs/cramfs/Kconfig @@ -0,0 +1,19 @@ +config CRAMFS + tristate "Compressed ROM file system support (cramfs)" + depends on BLOCK + select ZLIB_INFLATE + help + Saying Y here includes support for CramFs (Compressed ROM File + System). CramFs is designed to be a simple, small, and compressed + file system for ROM based embedded systems. CramFs is read-only, + limited to 256MB file systems (with 16MB files), and doesn't support + 16/32 bits uid/gid, hard links and timestamps. + + See <file:Documentation/filesystems/cramfs.txt> and + <file:fs/cramfs/README> for further information. + + To compile this as a module, choose M here: the module will be called + cramfs. Note that the root file system (the one containing the + directory /) cannot be compiled as a module. + + If unsure, say N. diff --git a/fs/dlm/plock.c b/fs/dlm/plock.c index eba87ff3177..894a32d438d 100644 --- a/fs/dlm/plock.c +++ b/fs/dlm/plock.c @@ -168,7 +168,7 @@ static int dlm_plock_callback(struct plock_op *op) notify = xop->callback; if (op->info.rv) { - notify(flc, NULL, op->info.rv); + notify(fl, NULL, op->info.rv); goto out; } @@ -187,7 +187,7 @@ static int dlm_plock_callback(struct plock_op *op) (unsigned long long)op->info.number, file, fl); } - rv = notify(flc, NULL, 0); + rv = notify(fl, NULL, 0); if (rv) { /* XXX: We need to cancel the fs lock here: */ log_print("dlm_plock_callback: lock granted after lock request " @@ -304,7 +304,9 @@ int dlm_posix_get(dlm_lockspace_t *lockspace, u64 number, struct file *file, if (rv == -ENOENT) rv = 0; else if (rv > 0) { + locks_init_lock(fl); fl->fl_type = (op->info.ex) ? F_WRLCK : F_RDLCK; + fl->fl_flags = FL_POSIX; fl->fl_pid = op->info.pid; fl->fl_start = op->info.start; fl->fl_end = op->info.end; diff --git a/fs/dquot.c b/fs/dquot.c index 48c0571f831..bca3cac4bee 100644 --- a/fs/dquot.c +++ b/fs/dquot.c @@ -87,14 +87,17 @@ #define __DQUOT_PARANOIA /* - * There are two quota SMP locks. dq_list_lock protects all lists with quotas - * and quota formats and also dqstats structure containing statistics about the - * lists. dq_data_lock protects data from dq_dqb and also mem_dqinfo structures - * and also guards consistency of dquot->dq_dqb with inode->i_blocks, i_bytes. + * There are three quota SMP locks. dq_list_lock protects all lists with quotas + * and quota formats, dqstats structure containing statistics about the lists + * dq_data_lock protects data from dq_dqb and also mem_dqinfo structures and + * also guards consistency of dquot->dq_dqb with inode->i_blocks, i_bytes. * i_blocks and i_bytes updates itself are guarded by i_lock acquired directly - * in inode_add_bytes() and inode_sub_bytes(). + * in inode_add_bytes() and inode_sub_bytes(). dq_state_lock protects + * modifications of quota state (on quotaon and quotaoff) and readers who care + * about latest values take it as well. * - * The spinlock ordering is hence: dq_data_lock > dq_list_lock > i_lock + * The spinlock ordering is hence: dq_data_lock > dq_list_lock > i_lock, + * dq_list_lock > dq_state_lock * * Note that some things (eg. sb pointer, type, id) doesn't change during * the life of the dquot structure and so needn't to be protected by a lock @@ -103,12 +106,7 @@ * operation is just reading pointers from inode (or not using them at all) the * read lock is enough. If pointers are altered function must hold write lock * (these locking rules also apply for S_NOQUOTA flag in the inode - note that - * for altering the flag i_mutex is also needed). If operation is holding - * reference to dquot in other way (e.g. quotactl ops) it must be guarded by - * dqonoff_mutex. - * This locking assures that: - * a) update/access to dquot pointers in inode is serialized - * b) everyone is guarded against invalidate_dquots() + * for altering the flag i_mutex is also needed). * * Each dquot has its dq_lock mutex. Locked dquots might not be referenced * from inodes (dquot_alloc_space() and such don't check the dq_lock). @@ -122,10 +120,17 @@ * Lock ordering (including related VFS locks) is the following: * i_mutex > dqonoff_sem > journal_lock > dqptr_sem > dquot->dq_lock > * dqio_mutex + * The lock ordering of dqptr_sem imposed by quota code is only dqonoff_sem > + * dqptr_sem. But filesystem has to count with the fact that functions such as + * dquot_alloc_space() acquire dqptr_sem and they usually have to be called + * from inside a transaction to keep filesystem consistency after a crash. Also + * filesystems usually want to do some IO on dquot from ->mark_dirty which is + * called with dqptr_sem held. * i_mutex on quota files is special (it's below dqio_mutex) */ static DEFINE_SPINLOCK(dq_list_lock); +static DEFINE_SPINLOCK(dq_state_lock); DEFINE_SPINLOCK(dq_data_lock); static char *quotatypes[] = INITQFNAMES; @@ -428,7 +433,7 @@ static inline void do_destroy_dquot(struct dquot *dquot) * quota is disabled and pointers from inodes removed so there cannot be new * quota users. There can still be some users of quotas due to inodes being * just deleted or pruned by prune_icache() (those are not attached to any - * list). We have to wait for such users. + * list) or parallel quotactl call. We have to wait for such users. */ static void invalidate_dquots(struct super_block *sb, int type) { @@ -600,7 +605,6 @@ static struct shrinker dqcache_shrinker = { /* * Put reference to dquot * NOTE: If you change this function please check whether dqput_blocks() works right... - * MUST be called with either dqptr_sem or dqonoff_mutex held */ void dqput(struct dquot *dquot) { @@ -697,36 +701,30 @@ static struct dquot *get_empty_dquot(struct super_block *sb, int type) } /* - * Check whether dquot is in memory. - * MUST be called with either dqptr_sem or dqonoff_mutex held - */ -int dquot_is_cached(struct super_block *sb, unsigned int id, int type) -{ - unsigned int hashent = hashfn(sb, id, type); - int ret = 0; - - if (!sb_has_quota_active(sb, type)) - return 0; - spin_lock(&dq_list_lock); - if (find_dquot(hashent, sb, id, type) != NODQUOT) - ret = 1; - spin_unlock(&dq_list_lock); - return ret; -} - -/* * Get reference to dquot - * MUST be called with either dqptr_sem or dqonoff_mutex held + * + * Locking is slightly tricky here. We are guarded from parallel quotaoff() + * destroying our dquot by: + * a) checking for quota flags under dq_list_lock and + * b) getting a reference to dquot before we release dq_list_lock */ struct dquot *dqget(struct super_block *sb, unsigned int id, int type) { unsigned int hashent = hashfn(sb, id, type); - struct dquot *dquot, *empty = NODQUOT; + struct dquot *dquot = NODQUOT, *empty = NODQUOT; if (!sb_has_quota_active(sb, type)) return NODQUOT; we_slept: spin_lock(&dq_list_lock); + spin_lock(&dq_state_lock); + if (!sb_has_quota_active(sb, type)) { + spin_unlock(&dq_state_lock); + spin_unlock(&dq_list_lock); + goto out; + } + spin_unlock(&dq_state_lock); + if ((dquot = find_dquot(hashent, sb, id, type)) == NODQUOT) { if (empty == NODQUOT) { spin_unlock(&dq_list_lock); @@ -735,6 +733,7 @@ we_slept: goto we_slept; } dquot = empty; + empty = NODQUOT; dquot->dq_id = id; /* all dquots go on the inuse_list */ put_inuse(dquot); @@ -749,8 +748,6 @@ we_slept: dqstats.cache_hits++; dqstats.lookups++; spin_unlock(&dq_list_lock); - if (empty) - do_destroy_dquot(empty); } /* Wait for dq_lock - after this we know that either dquot_release() is already * finished or it will be canceled due to dq_count > 1 test */ @@ -758,11 +755,15 @@ we_slept: /* Read the dquot and instantiate it (everything done only if needed) */ if (!test_bit(DQ_ACTIVE_B, &dquot->dq_flags) && sb->dq_op->acquire_dquot(dquot) < 0) { dqput(dquot); - return NODQUOT; + dquot = NODQUOT; + goto out; } #ifdef __DQUOT_PARANOIA BUG_ON(!dquot->dq_sb); /* Has somebody invalidated entry under us? */ #endif +out: + if (empty) + do_destroy_dquot(empty); return dquot; } @@ -1198,63 +1199,76 @@ static int info_bdq_free(struct dquot *dquot, qsize_t space) } /* * Initialize quota pointers in inode - * Transaction must be started at entry + * We do things in a bit complicated way but by that we avoid calling + * dqget() and thus filesystem callbacks under dqptr_sem. */ int dquot_initialize(struct inode *inode, int type) { unsigned int id = 0; int cnt, ret = 0; + struct dquot *got[MAXQUOTAS] = { NODQUOT, NODQUOT }; + struct super_block *sb = inode->i_sb; /* First test before acquiring mutex - solves deadlocks when we * re-enter the quota code and are already holding the mutex */ if (IS_NOQUOTA(inode)) return 0; - down_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + + /* First get references to structures we might need. */ + for (cnt = 0; cnt < MAXQUOTAS; cnt++) { + if (type != -1 && cnt != type) + continue; + switch (cnt) { + case USRQUOTA: + id = inode->i_uid; + break; + case GRPQUOTA: + id = inode->i_gid; + break; + } + got[cnt] = dqget(sb, id, cnt); + } + + down_write(&sb_dqopt(sb)->dqptr_sem); /* Having dqptr_sem we know NOQUOTA flags can't be altered... */ if (IS_NOQUOTA(inode)) goto out_err; for (cnt = 0; cnt < MAXQUOTAS; cnt++) { if (type != -1 && cnt != type) continue; + /* Avoid races with quotaoff() */ + if (!sb_has_quota_active(sb, cnt)) + continue; if (inode->i_dquot[cnt] == NODQUOT) { - switch (cnt) { - case USRQUOTA: - id = inode->i_uid; - break; - case GRPQUOTA: - id = inode->i_gid; - break; - } - inode->i_dquot[cnt] = dqget(inode->i_sb, id, cnt); + inode->i_dquot[cnt] = got[cnt]; + got[cnt] = NODQUOT; } } out_err: - up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + up_write(&sb_dqopt(sb)->dqptr_sem); + /* Drop unused references */ + for (cnt = 0; cnt < MAXQUOTAS; cnt++) + dqput(got[cnt]); return ret; } /* * Release all quotas referenced by inode - * Transaction must be started at an entry */ -int dquot_drop_locked(struct inode *inode) +int dquot_drop(struct inode *inode) { int cnt; + struct dquot *put[MAXQUOTAS]; + down_write(&sb_dqopt(inode->i_sb)->dqptr_sem); for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - if (inode->i_dquot[cnt] != NODQUOT) { - dqput(inode->i_dquot[cnt]); - inode->i_dquot[cnt] = NODQUOT; - } + put[cnt] = inode->i_dquot[cnt]; + inode->i_dquot[cnt] = NODQUOT; } - return 0; -} - -int dquot_drop(struct inode *inode) -{ - down_write(&sb_dqopt(inode->i_sb)->dqptr_sem); - dquot_drop_locked(inode); up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + + for (cnt = 0; cnt < MAXQUOTAS; cnt++) + dqput(put[cnt]); return 0; } @@ -1470,8 +1484,9 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr) qsize_t space; struct dquot *transfer_from[MAXQUOTAS]; struct dquot *transfer_to[MAXQUOTAS]; - int cnt, ret = NO_QUOTA, chuid = (iattr->ia_valid & ATTR_UID) && inode->i_uid != iattr->ia_uid, - chgid = (iattr->ia_valid & ATTR_GID) && inode->i_gid != iattr->ia_gid; + int cnt, ret = QUOTA_OK; + int chuid = iattr->ia_valid & ATTR_UID && inode->i_uid != iattr->ia_uid, + chgid = iattr->ia_valid & ATTR_GID && inode->i_gid != iattr->ia_gid; char warntype_to[MAXQUOTAS]; char warntype_from_inodes[MAXQUOTAS], warntype_from_space[MAXQUOTAS]; @@ -1479,21 +1494,11 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr) * re-enter the quota code and are already holding the mutex */ if (IS_NOQUOTA(inode)) return QUOTA_OK; - /* Clear the arrays */ + /* Initialize the arrays */ for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - transfer_to[cnt] = transfer_from[cnt] = NODQUOT; + transfer_from[cnt] = NODQUOT; + transfer_to[cnt] = NODQUOT; warntype_to[cnt] = QUOTA_NL_NOWARN; - } - down_write(&sb_dqopt(inode->i_sb)->dqptr_sem); - /* Now recheck reliably when holding dqptr_sem */ - if (IS_NOQUOTA(inode)) { /* File without quota accounting? */ - up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); - return QUOTA_OK; - } - /* First build the transfer_to list - here we can block on - * reading/instantiating of dquots. We know that the transaction for - * us was already started so we don't violate lock ranking here */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) { switch (cnt) { case USRQUOTA: if (!chuid) @@ -1507,6 +1512,13 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr) break; } } + + down_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + /* Now recheck reliably when holding dqptr_sem */ + if (IS_NOQUOTA(inode)) { /* File without quota accounting? */ + up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + goto put_all; + } spin_lock(&dq_data_lock); space = inode_get_bytes(inode); /* Build the transfer_from list and check the limits */ @@ -1517,7 +1529,7 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr) if (check_idq(transfer_to[cnt], 1, warntype_to + cnt) == NO_QUOTA || check_bdq(transfer_to[cnt], space, 0, warntype_to + cnt) == NO_QUOTA) - goto warn_put_all; + goto over_quota; } /* @@ -1545,28 +1557,37 @@ int dquot_transfer(struct inode *inode, struct iattr *iattr) inode->i_dquot[cnt] = transfer_to[cnt]; } - ret = QUOTA_OK; -warn_put_all: spin_unlock(&dq_data_lock); + up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + /* Dirtify all the dquots - this can block when journalling */ for (cnt = 0; cnt < MAXQUOTAS; cnt++) { if (transfer_from[cnt]) mark_dquot_dirty(transfer_from[cnt]); - if (transfer_to[cnt]) + if (transfer_to[cnt]) { mark_dquot_dirty(transfer_to[cnt]); + /* The reference we got is transferred to the inode */ + transfer_to[cnt] = NODQUOT; + } } +warn_put_all: flush_warnings(transfer_to, warntype_to); flush_warnings(transfer_from, warntype_from_inodes); flush_warnings(transfer_from, warntype_from_space); - +put_all: for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - if (ret == QUOTA_OK && transfer_from[cnt] != NODQUOT) - dqput(transfer_from[cnt]); - if (ret == NO_QUOTA && transfer_to[cnt] != NODQUOT) - dqput(transfer_to[cnt]); + dqput(transfer_from[cnt]); + dqput(transfer_to[cnt]); } - up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); return ret; +over_quota: + spin_unlock(&dq_data_lock); + up_write(&sb_dqopt(inode->i_sb)->dqptr_sem); + /* Clear dquot pointers we don't want to dqput() */ + for (cnt = 0; cnt < MAXQUOTAS; cnt++) + transfer_from[cnt] = NODQUOT; + ret = NO_QUOTA; + goto warn_put_all; } /* Wrapper for transferring ownership of an inode */ @@ -1651,19 +1672,24 @@ int vfs_quota_disable(struct super_block *sb, int type, unsigned int flags) continue; if (flags & DQUOT_SUSPENDED) { + spin_lock(&dq_state_lock); dqopt->flags |= dquot_state_flag(DQUOT_SUSPENDED, cnt); + spin_unlock(&dq_state_lock); } else { + spin_lock(&dq_state_lock); dqopt->flags &= ~dquot_state_flag(flags, cnt); /* Turning off suspended quotas? */ if (!sb_has_quota_loaded(sb, cnt) && sb_has_quota_suspended(sb, cnt)) { dqopt->flags &= ~dquot_state_flag( DQUOT_SUSPENDED, cnt); + spin_unlock(&dq_state_lock); iput(dqopt->files[cnt]); dqopt->files[cnt] = NULL; continue; } + spin_unlock(&dq_state_lock); } /* We still have to keep quota loaded? */ @@ -1830,7 +1856,9 @@ static int vfs_load_quota_inode(struct inode *inode, int type, int format_id, } mutex_unlock(&dqopt->dqio_mutex); mutex_unlock(&inode->i_mutex); + spin_lock(&dq_state_lock); dqopt->flags |= dquot_state_flag(flags, type); + spin_unlock(&dq_state_lock); add_dquot_ref(sb, type); mutex_unlock(&dqopt->dqonoff_mutex); @@ -1872,9 +1900,11 @@ static int vfs_quota_on_remount(struct super_block *sb, int type) } inode = dqopt->files[type]; dqopt->files[type] = NULL; + spin_lock(&dq_state_lock); flags = dqopt->flags & dquot_state_flag(DQUOT_USAGE_ENABLED | DQUOT_LIMITS_ENABLED, type); dqopt->flags &= ~dquot_state_flag(DQUOT_STATE_FLAGS, type); + spin_unlock(&dq_state_lock); mutex_unlock(&dqopt->dqonoff_mutex); flags = dquot_generic_flag(flags, type); @@ -1952,7 +1982,9 @@ int vfs_quota_enable(struct inode *inode, int type, int format_id, ret = -EBUSY; goto out_lock; } + spin_lock(&dq_state_lock); sb_dqopt(sb)->flags |= dquot_state_flag(flags, type); + spin_unlock(&dq_state_lock); out_lock: mutex_unlock(&dqopt->dqonoff_mutex); return ret; @@ -2039,14 +2071,12 @@ int vfs_get_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *d { struct dquot *dquot; - mutex_lock(&sb_dqopt(sb)->dqonoff_mutex); - if (!(dquot = dqget(sb, id, type))) { - mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex); + dquot = dqget(sb, id, type); + if (dquot == NODQUOT) return -ESRCH; - } do_get_dqblk(dquot, di); dqput(dquot); - mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex); + return 0; } @@ -2130,7 +2160,6 @@ int vfs_set_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *d struct dquot *dquot; int rc; - mutex_lock(&sb_dqopt(sb)->dqonoff_mutex); dquot = dqget(sb, id, type); if (!dquot) { rc = -ESRCH; @@ -2139,7 +2168,6 @@ int vfs_set_dqblk(struct super_block *sb, int type, qid_t id, struct if_dqblk *d rc = do_set_dqblk(dquot, di); dqput(dquot); out: - mutex_unlock(&sb_dqopt(sb)->dqonoff_mutex); return rc; } @@ -2370,11 +2398,9 @@ EXPORT_SYMBOL(dquot_release); EXPORT_SYMBOL(dquot_mark_dquot_dirty); EXPORT_SYMBOL(dquot_initialize); EXPORT_SYMBOL(dquot_drop); -EXPORT_SYMBOL(dquot_drop_locked); EXPORT_SYMBOL(vfs_dq_drop); EXPORT_SYMBOL(dqget); EXPORT_SYMBOL(dqput); -EXPORT_SYMBOL(dquot_is_cached); EXPORT_SYMBOL(dquot_alloc_space); EXPORT_SYMBOL(dquot_alloc_inode); EXPORT_SYMBOL(dquot_free_space); diff --git a/fs/ecryptfs/Kconfig b/fs/ecryptfs/Kconfig new file mode 100644 index 00000000000..0c754e64232 --- /dev/null +++ b/fs/ecryptfs/Kconfig @@ -0,0 +1,11 @@ +config ECRYPT_FS + tristate "eCrypt filesystem layer support (EXPERIMENTAL)" + depends on EXPERIMENTAL && KEYS && CRYPTO && NET + help + Encrypted filesystem that operates on the VFS layer. See + <file:Documentation/filesystems/ecryptfs.txt> to learn more about + eCryptfs. Userspace components are required and can be + obtained from <http://ecryptfs.sf.net>. + + To compile this file system support as a module, choose M here: the + module will be called ecryptfs. diff --git a/fs/efs/Kconfig b/fs/efs/Kconfig new file mode 100644 index 00000000000..6ebfc1c207a --- /dev/null +++ b/fs/efs/Kconfig @@ -0,0 +1,14 @@ +config EFS_FS + tristate "EFS file system support (read only) (EXPERIMENTAL)" + depends on BLOCK && EXPERIMENTAL + help + EFS is an older file system used for non-ISO9660 CD-ROMs and hard + disk partitions by SGI's IRIX operating system (IRIX 6.0 and newer + uses the XFS file system for hard disk partitions however). + + This implementation only offers read-only access. If you don't know + what all this is about, it's safe to say N. For more information + about EFS see its home page at <http://aeschi.ch.eu.org/efs/>. + + To compile the EFS file system support as a module, choose M here: the + module will be called efs. diff --git a/fs/fat/Kconfig b/fs/fat/Kconfig new file mode 100644 index 00000000000..d0a69ff2537 --- /dev/null +++ b/fs/fat/Kconfig @@ -0,0 +1,97 @@ +config FAT_FS + tristate + select NLS + help + If you want to use one of the FAT-based file systems (the MS-DOS and + VFAT (Windows 95) file systems), then you must say Y or M here + to include FAT support. You will then be able to mount partitions or + diskettes with FAT-based file systems and transparently access the + files on them, i.e. MSDOS files will look and behave just like all + other Unix files. + + This FAT support is not a file system in itself, it only provides + the foundation for the other file systems. You will have to say Y or + M to at least one of "MSDOS fs support" or "VFAT fs support" in + order to make use of it. + + Another way to read and write MSDOS floppies and hard drive + partitions from within Linux (but not transparently) is with the + mtools ("man mtools") program suite. You don't need to say Y here in + order to do that. + + If you need to move large files on floppies between a DOS and a + Linux box, say Y here, mount the floppy under Linux with an MSDOS + file system and use GNU tar's M option. GNU tar is a program + available for Unix and DOS ("man tar" or "info tar"). + + The FAT support will enlarge your kernel by about 37 KB. If unsure, + say Y. + + To compile this as a module, choose M here: the module will be called + fat. Note that if you compile the FAT support as a module, you + cannot compile any of the FAT-based file systems into the kernel + -- they will have to be modules as well. + +config MSDOS_FS + tristate "MSDOS fs support" + select FAT_FS + help + This allows you to mount MSDOS partitions of your hard drive (unless + they are compressed; to access compressed MSDOS partitions under + Linux, you can either use the DOS emulator DOSEMU, described in the + DOSEMU-HOWTO, available from + <http://www.tldp.org/docs.html#howto>, or try dmsdosfs in + <ftp://ibiblio.org/pub/Linux/system/filesystems/dosfs/>. If you + intend to use dosemu with a non-compressed MSDOS partition, say Y + here) and MSDOS floppies. This means that file access becomes + transparent, i.e. the MSDOS files look and behave just like all + other Unix files. + + If you have Windows 95 or Windows NT installed on your MSDOS + partitions, you should use the VFAT file system (say Y to "VFAT fs + support" below), or you will not be able to see the long filenames + generated by Windows 95 / Windows NT. + + This option will enlarge your kernel by about 7 KB. If unsure, + answer Y. This will only work if you said Y to "DOS FAT fs support" + as well. To compile this as a module, choose M here: the module will + be called msdos. + +config VFAT_FS + tristate "VFAT (Windows-95) fs support" + select FAT_FS + help + This option provides support for normal Windows file systems with + long filenames. That includes non-compressed FAT-based file systems + used by Windows 95, Windows 98, Windows NT 4.0, and the Unix + programs from the mtools package. + + The VFAT support enlarges your kernel by about 10 KB and it only + works if you said Y to the "DOS FAT fs support" above. Please read + the file <file:Documentation/filesystems/vfat.txt> for details. If + unsure, say Y. + + To compile this as a module, choose M here: the module will be called + vfat. + +config FAT_DEFAULT_CODEPAGE + int "Default codepage for FAT" + depends on MSDOS_FS || VFAT_FS + default 437 + help + This option should be set to the codepage of your FAT filesystems. + It can be overridden with the "codepage" mount option. + See <file:Documentation/filesystems/vfat.txt> for more information. + +config FAT_DEFAULT_IOCHARSET + string "Default iocharset for FAT" + depends on VFAT_FS + default "iso8859-1" + help + Set this to the default input/output character set you'd + like FAT to use. It should probably match the character set + that most of your FAT filesystems use, and can be overridden + with the "iocharset" mount option for FAT filesystems. + Note that "utf8" is not recommended for FAT filesystems. + If unsure, you shouldn't set "utf8" here. + See <file:Documentation/filesystems/vfat.txt> for more information. diff --git a/fs/freevxfs/Kconfig b/fs/freevxfs/Kconfig new file mode 100644 index 00000000000..8dc1cd5c1ef --- /dev/null +++ b/fs/freevxfs/Kconfig @@ -0,0 +1,16 @@ +config VXFS_FS + tristate "FreeVxFS file system support (VERITAS VxFS(TM) compatible)" + depends on BLOCK + help + FreeVxFS is a file system driver that support the VERITAS VxFS(TM) + file system format. VERITAS VxFS(TM) is the standard file system + of SCO UnixWare (and possibly others) and optionally available + for Sunsoft Solaris, HP-UX and many other operating systems. + Currently only readonly access is supported. + + NOTE: the file system type as used by mount(1), mount(2) and + fstab(5) is 'vxfs' as it describes the file system format, not + the actual driver. + + To compile this as a module, choose M here: the module will be + called freevxfs. If unsure, say N. diff --git a/fs/fuse/Kconfig b/fs/fuse/Kconfig new file mode 100644 index 00000000000..0cf160a94ed --- /dev/null +++ b/fs/fuse/Kconfig @@ -0,0 +1,15 @@ +config FUSE_FS + tristate "FUSE (Filesystem in Userspace) support" + help + With FUSE it is possible to implement a fully functional filesystem + in a userspace program. + + There's also companion library: libfuse. This library along with + utilities is available from the FUSE homepage: + <http://fuse.sourceforge.net/> + + See <file:Documentation/filesystems/fuse.txt> for more information. + See <file:Documentation/Changes> for needed library/utility version. + + If you want to develop a userspace FS, or if you want to use + a filesystem based on FUSE, answer Y or M. diff --git a/fs/fuse/dev.c b/fs/fuse/dev.c index e0c7ada08a1..ba76b68c52f 100644 --- a/fs/fuse/dev.c +++ b/fs/fuse/dev.c @@ -281,7 +281,8 @@ __releases(&fc->lock) fc->blocked = 0; wake_up_all(&fc->blocked_waitq); } - if (fc->num_background == FUSE_CONGESTION_THRESHOLD) { + if (fc->num_background == FUSE_CONGESTION_THRESHOLD && + fc->connected) { clear_bdi_congested(&fc->bdi, READ); clear_bdi_congested(&fc->bdi, WRITE); } @@ -825,16 +826,21 @@ static int fuse_notify_poll(struct fuse_conn *fc, unsigned int size, struct fuse_copy_state *cs) { struct fuse_notify_poll_wakeup_out outarg; - int err; + int err = -EINVAL; if (size != sizeof(outarg)) - return -EINVAL; + goto err; err = fuse_copy_one(cs, &outarg, sizeof(outarg)); if (err) - return err; + goto err; + fuse_copy_finish(cs); return fuse_notify_poll_wakeup(fc, &outarg); + +err: + fuse_copy_finish(cs); + return err; } static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code, @@ -845,6 +851,7 @@ static int fuse_notify(struct fuse_conn *fc, enum fuse_notify_code code, return fuse_notify_poll(fc, size, cs); default: + fuse_copy_finish(cs); return -EINVAL; } } @@ -923,7 +930,6 @@ static ssize_t fuse_dev_write(struct kiocb *iocb, const struct iovec *iov, */ if (!oh.unique) { err = fuse_notify(fc, oh.error, nbytes - sizeof(oh), &cs); - fuse_copy_finish(&cs); return err ? err : nbytes; } diff --git a/fs/fuse/file.c b/fs/fuse/file.c index e8162646a9b..d9fdb7cec53 100644 --- a/fs/fuse/file.c +++ b/fs/fuse/file.c @@ -54,7 +54,7 @@ struct fuse_file *fuse_file_alloc(struct fuse_conn *fc) ff->reserved_req = fuse_request_alloc(); if (!ff->reserved_req) { kfree(ff); - ff = NULL; + return NULL; } else { INIT_LIST_HEAD(&ff->write_entry); atomic_set(&ff->count, 0); diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c index 47c96fdca1a..459b73dd45e 100644 --- a/fs/fuse/inode.c +++ b/fs/fuse/inode.c @@ -292,6 +292,7 @@ static void fuse_put_super(struct super_block *sb) list_del(&fc->entry); fuse_ctl_remove_conn(fc); mutex_unlock(&fuse_mutex); + bdi_destroy(&fc->bdi); fuse_conn_put(fc); } @@ -532,7 +533,6 @@ void fuse_conn_put(struct fuse_conn *fc) if (fc->destroy_req) fuse_request_free(fc->destroy_req); mutex_destroy(&fc->inst_mutex); - bdi_destroy(&fc->bdi); fc->release(fc); } } @@ -805,16 +805,18 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) int err; int is_bdev = sb->s_bdev != NULL; + err = -EINVAL; if (sb->s_flags & MS_MANDLOCK) - return -EINVAL; + goto err; if (!parse_fuse_opt((char *) data, &d, is_bdev)) - return -EINVAL; + goto err; if (is_bdev) { #ifdef CONFIG_BLOCK + err = -EINVAL; if (!sb_set_blocksize(sb, d.blksize)) - return -EINVAL; + goto err; #endif } else { sb->s_blocksize = PAGE_CACHE_SIZE; @@ -826,20 +828,22 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) sb->s_export_op = &fuse_export_operations; file = fget(d.fd); + err = -EINVAL; if (!file) - return -EINVAL; + goto err; if (file->f_op != &fuse_dev_operations) - return -EINVAL; + goto err_fput; fc = kmalloc(sizeof(*fc), GFP_KERNEL); + err = -ENOMEM; if (!fc) - return -ENOMEM; + goto err_fput; err = fuse_conn_init(fc, sb); if (err) { kfree(fc); - return err; + goto err_fput; } fc->release = fuse_free_conn; @@ -854,12 +858,12 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) err = -ENOMEM; root = fuse_get_root_inode(sb, d.rootmode); if (!root) - goto err; + goto err_put_conn; root_dentry = d_alloc_root(root); if (!root_dentry) { iput(root); - goto err; + goto err_put_conn; } init_req = fuse_request_alloc(); @@ -903,9 +907,11 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent) fuse_request_free(init_req); err_put_root: dput(root_dentry); - err: - fput(file); + err_put_conn: fuse_conn_put(fc); + err_fput: + fput(file); + err: return err; } diff --git a/fs/hfs/Kconfig b/fs/hfs/Kconfig new file mode 100644 index 00000000000..b77c5bc20f8 --- /dev/null +++ b/fs/hfs/Kconfig @@ -0,0 +1,12 @@ +config HFS_FS + tristate "Apple Macintosh file system support (EXPERIMENTAL)" + depends on BLOCK && EXPERIMENTAL + select NLS + help + If you say Y here, you will be able to mount Macintosh-formatted + floppy disks and hard drive partitions with full read-write access. + Please read <file:Documentation/filesystems/hfs.txt> to learn about + the available mount options. + + To compile this file system support as a module, choose M here: the + module will be called hfs. diff --git a/fs/hfsplus/Kconfig b/fs/hfsplus/Kconfig new file mode 100644 index 00000000000..a63371815aa --- /dev/null +++ b/fs/hfsplus/Kconfig @@ -0,0 +1,13 @@ +config HFSPLUS_FS + tristate "Apple Extended HFS file system support" + depends on BLOCK + select NLS + select NLS_UTF8 + help + If you say Y here, you will be able to mount extended format + Macintosh-formatted hard drive partitions with full read-write access. + + This file system is often called HFS+ and was introduced with + MacOS 8. It includes all Mac specific filesystem data such as + data forks and creator codes, but it also has several UNIX + style features such as file ownership and permissions. diff --git a/fs/hpfs/Kconfig b/fs/hpfs/Kconfig new file mode 100644 index 00000000000..56bd15c5bf6 --- /dev/null +++ b/fs/hpfs/Kconfig @@ -0,0 +1,14 @@ +config HPFS_FS + tristate "OS/2 HPFS file system support" + depends on BLOCK + help + OS/2 is IBM's operating system for PC's, the same as Warp, and HPFS + is the file system used for organizing files on OS/2 hard disk + partitions. Say Y if you want to be able to read files from and + write files to an OS/2 HPFS partition on your hard drive. OS/2 + floppies however are in regular MSDOS format, so you don't need this + option in order to be able to read them. Read + <file:Documentation/filesystems/hpfs.txt>. + + To compile this file system support as a module, choose M here: the + module will be called hpfs. If unsure, say N. diff --git a/fs/isofs/Kconfig b/fs/isofs/Kconfig new file mode 100644 index 00000000000..8ab9878e367 --- /dev/null +++ b/fs/isofs/Kconfig @@ -0,0 +1,39 @@ +config ISO9660_FS + tristate "ISO 9660 CDROM file system support" + help + This is the standard file system used on CD-ROMs. It was previously + known as "High Sierra File System" and is called "hsfs" on other + Unix systems. The so-called Rock-Ridge extensions which allow for + long Unix filenames and symbolic links are also supported by this + driver. If you have a CD-ROM drive and want to do more with it than + just listen to audio CDs and watch its LEDs, say Y (and read + <file:Documentation/filesystems/isofs.txt> and the CD-ROM-HOWTO, + available from <http://www.tldp.org/docs.html#howto>), thereby + enlarging your kernel by about 27 KB; otherwise say N. + + To compile this file system support as a module, choose M here: the + module will be called isofs. + +config JOLIET + bool "Microsoft Joliet CDROM extensions" + depends on ISO9660_FS + select NLS + help + Joliet is a Microsoft extension for the ISO 9660 CD-ROM file system + which allows for long filenames in unicode format (unicode is the + new 16 bit character code, successor to ASCII, which encodes the + characters of almost all languages of the world; see + <http://www.unicode.org/> for more information). Say Y here if you + want to be able to read Joliet CD-ROMs under Linux. + +config ZISOFS + bool "Transparent decompression extension" + depends on ISO9660_FS + select ZLIB_INFLATE + help + This is a Linux-specific extension to RockRidge which lets you store + data in compressed form on a CD-ROM and have it transparently + decompressed when the CD-ROM is accessed. See + <http://www.kernel.org/pub/linux/utils/fs/zisofs/> for the tools + necessary to create such a filesystem. Say Y here if you want to be + able to read such compressed CD-ROMs. diff --git a/fs/jfs/Kconfig b/fs/jfs/Kconfig new file mode 100644 index 00000000000..9ff619a6f9c --- /dev/null +++ b/fs/jfs/Kconfig @@ -0,0 +1,49 @@ +config JFS_FS + tristate "JFS filesystem support" + select NLS + help + This is a port of IBM's Journaled Filesystem . More information is + available in the file <file:Documentation/filesystems/jfs.txt>. + + If you do not intend to use the JFS filesystem, say N. + +config JFS_POSIX_ACL + bool "JFS POSIX Access Control Lists" + depends on JFS_FS + select FS_POSIX_ACL + help + Posix Access Control Lists (ACLs) support permissions for users and + groups beyond the owner/group/world scheme. + + To learn more about Access Control Lists, visit the Posix ACLs for + Linux website <http://acl.bestbits.at/>. + + If you don't know what Access Control Lists are, say N + +config JFS_SECURITY + bool "JFS Security Labels" + depends on JFS_FS + help + Security labels support alternative access control models + implemented by security modules like SELinux. This option + enables an extended attribute handler for file security + labels in the jfs filesystem. + + If you are not using a security module that requires using + extended attributes for file security labels, say N. + +config JFS_DEBUG + bool "JFS debugging" + depends on JFS_FS + help + If you are experiencing any problems with the JFS filesystem, say + Y here. This will result in additional debugging messages to be + written to the system log. Under normal circumstances, this + results in very little overhead. + +config JFS_STATISTICS + bool "JFS statistics" + depends on JFS_FS + help + Enabling this option will cause statistics from the JFS file system + to be made available to the user in the /proc/fs/jfs/ directory. diff --git a/fs/minix/Kconfig b/fs/minix/Kconfig new file mode 100644 index 00000000000..0fd7ca99426 --- /dev/null +++ b/fs/minix/Kconfig @@ -0,0 +1,17 @@ +config MINIX_FS + tristate "Minix file system support" + depends on BLOCK + help + Minix is a simple operating system used in many classes about OS's. + The minix file system (method to organize files on a hard disk + partition or a floppy disk) was the original file system for Linux, + but has been superseded by the second extended file system ext2fs. + You don't want to use the minix file system on your hard disk + because of certain built-in restrictions, but it is sometimes found + on older Linux floppy disks. This option will enlarge your kernel + by about 28 KB. If unsure, say N. + + To compile this file system support as a module, choose M here: the + module will be called minix. Note that the file system of your root + partition (the one containing the directory /) cannot be compiled as + a module. diff --git a/fs/ncpfs/Kconfig b/fs/ncpfs/Kconfig index 142808427b2..c931cf22a1f 100644 --- a/fs/ncpfs/Kconfig +++ b/fs/ncpfs/Kconfig @@ -1,6 +1,27 @@ # # NCP Filesystem configuration # +config NCP_FS + tristate "NCP file system support (to mount NetWare volumes)" + depends on IPX!=n || INET + help + NCP (NetWare Core Protocol) is a protocol that runs over IPX and is + used by Novell NetWare clients to talk to file servers. It is to + IPX what NFS is to TCP/IP, if that helps. Saying Y here allows you + to mount NetWare file server volumes and to access them just like + any other Unix directory. For details, please read the file + <file:Documentation/filesystems/ncpfs.txt> in the kernel source and + the IPX-HOWTO from <http://www.tldp.org/docs.html#howto>. + + You do not have to say Y here if you want your Linux box to act as a + file *server* for Novell NetWare clients. + + General information about how to connect Linux, Windows machines and + Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. + + To compile this as a module, choose M here: the module will be called + ncpfs. Say N unless you are connected to a Novell network. + config NCPFS_PACKET_SIGNING bool "Packet signatures" depends on NCP_FS diff --git a/fs/nfs/Kconfig b/fs/nfs/Kconfig new file mode 100644 index 00000000000..36fe20d6eba --- /dev/null +++ b/fs/nfs/Kconfig @@ -0,0 +1,86 @@ +config NFS_FS + tristate "NFS client support" + depends on INET + select LOCKD + select SUNRPC + select NFS_ACL_SUPPORT if NFS_V3_ACL + help + Choose Y here if you want to access files residing on other + computers using Sun's Network File System protocol. To compile + this file system support as a module, choose M here: the module + will be called nfs. + + To mount file systems exported by NFS servers, you also need to + install the user space mount.nfs command which can be found in + the Linux nfs-utils package, available from http://linux-nfs.org/. + Information about using the mount command is available in the + mount(8) man page. More detail about the Linux NFS client + implementation is available via the nfs(5) man page. + + Below you can choose which versions of the NFS protocol are + available in the kernel to mount NFS servers. Support for NFS + version 2 (RFC 1094) is always available when NFS_FS is selected. + + To configure a system which mounts its root file system via NFS + at boot time, say Y here, select "Kernel level IP + autoconfiguration" in the NETWORK menu, and select "Root file + system on NFS" below. You cannot compile this file system as a + module in this case. + + If unsure, say N. + +config NFS_V3 + bool "NFS client support for NFS version 3" + depends on NFS_FS + help + This option enables support for version 3 of the NFS protocol + (RFC 1813) in the kernel's NFS client. + + If unsure, say Y. + +config NFS_V3_ACL + bool "NFS client support for the NFSv3 ACL protocol extension" + depends on NFS_V3 + help + Some NFS servers support an auxiliary NFSv3 ACL protocol that + Sun added to Solaris but never became an official part of the + NFS version 3 protocol. This protocol extension allows + applications on NFS clients to manipulate POSIX Access Control + Lists on files residing on NFS servers. NFS servers enforce + ACLs on local files whether this protocol is available or not. + + Choose Y here if your NFS server supports the Solaris NFSv3 ACL + protocol extension and you want your NFS client to allow + applications to access and modify ACLs on files on the server. + + Most NFS servers don't support the Solaris NFSv3 ACL protocol + extension. You can choose N here or specify the "noacl" mount + option to prevent your NFS client from trying to use the NFSv3 + ACL protocol. + + If unsure, say N. + +config NFS_V4 + bool "NFS client support for NFS version 4 (EXPERIMENTAL)" + depends on NFS_FS && EXPERIMENTAL + select RPCSEC_GSS_KRB5 + help + This option enables support for version 4 of the NFS protocol + (RFC 3530) in the kernel's NFS client. + + To mount NFS servers using NFSv4, you also need to install user + space programs which can be found in the Linux nfs-utils package, + available from http://linux-nfs.org/. + + If unsure, say N. + +config ROOT_NFS + bool "Root file system on NFS" + depends on NFS_FS=y && IP_PNP + help + If you want your system to mount its root file system via NFS, + choose Y here. This is common practice for managing systems + without local permanent storage. For details, read + <file:Documentation/filesystems/nfsroot.txt>. + + Most people say N here. diff --git a/fs/nfsd/Kconfig b/fs/nfsd/Kconfig new file mode 100644 index 00000000000..44d7d04dab9 --- /dev/null +++ b/fs/nfsd/Kconfig @@ -0,0 +1,80 @@ +config NFSD + tristate "NFS server support" + depends on INET + select LOCKD + select SUNRPC + select EXPORTFS + select NFS_ACL_SUPPORT if NFSD_V2_ACL + help + Choose Y here if you want to allow other computers to access + files residing on this system using Sun's Network File System + protocol. To compile the NFS server support as a module, + choose M here: the module will be called nfsd. + + You may choose to use a user-space NFS server instead, in which + case you can choose N here. + + To export local file systems using NFS, you also need to install + user space programs which can be found in the Linux nfs-utils + package, available from http://linux-nfs.org/. More detail about + the Linux NFS server implementation is available via the + exports(5) man page. + + Below you can choose which versions of the NFS protocol are + available to clients mounting the NFS server on this system. + Support for NFS version 2 (RFC 1094) is always available when + CONFIG_NFSD is selected. + + If unsure, say N. + +config NFSD_V2_ACL + bool + depends on NFSD + +config NFSD_V3 + bool "NFS server support for NFS version 3" + depends on NFSD + help + This option enables support in your system's NFS server for + version 3 of the NFS protocol (RFC 1813). + + If unsure, say Y. + +config NFSD_V3_ACL + bool "NFS server support for the NFSv3 ACL protocol extension" + depends on NFSD_V3 + select NFSD_V2_ACL + help + Solaris NFS servers support an auxiliary NFSv3 ACL protocol that + never became an official part of the NFS version 3 protocol. + This protocol extension allows applications on NFS clients to + manipulate POSIX Access Control Lists on files residing on NFS + servers. NFS servers enforce POSIX ACLs on local files whether + this protocol is available or not. + + This option enables support in your system's NFS server for the + NFSv3 ACL protocol extension allowing NFS clients to manipulate + POSIX ACLs on files exported by your system's NFS server. NFS + clients which support the Solaris NFSv3 ACL protocol can then + access and modify ACLs on your NFS server. + + To store ACLs on your NFS server, you also need to enable ACL- + related CONFIG options for your local file systems of choice. + + If unsure, say N. + +config NFSD_V4 + bool "NFS server support for NFS version 4 (EXPERIMENTAL)" + depends on NFSD && PROC_FS && EXPERIMENTAL + select NFSD_V3 + select FS_POSIX_ACL + select RPCSEC_GSS_KRB5 + help + This option enables support in your system's NFS server for + version 4 of the NFS protocol (RFC 3530). + + To export files using NFSv4, you need to install additional user + space programs which can be found in the Linux nfs-utils package, + available from http://linux-nfs.org/. + + If unsure, say N. diff --git a/fs/nfsd/auth.c b/fs/nfsd/auth.c index c903e04aa21..5573508f707 100644 --- a/fs/nfsd/auth.c +++ b/fs/nfsd/auth.c @@ -49,6 +49,8 @@ int nfsd_setuser(struct svc_rqst *rqstp, struct svc_export *exp) new->fsuid = exp->ex_anon_uid; new->fsgid = exp->ex_anon_gid; gi = groups_alloc(0); + if (!gi) + goto oom; } else if (flags & NFSEXP_ROOTSQUASH) { if (!new->fsuid) new->fsuid = exp->ex_anon_uid; @@ -85,6 +87,7 @@ int nfsd_setuser(struct svc_rqst *rqstp, struct svc_export *exp) new->cap_effective = cap_raise_nfsd_set(new->cap_effective, new->cap_permitted); put_cred(override_creds(new)); + put_cred(new); return 0; oom: diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c index 88db7d3ec12..b6f60f48e94 100644 --- a/fs/nfsd/nfs4state.c +++ b/fs/nfsd/nfs4state.c @@ -2871,7 +2871,6 @@ nfsd4_lockt(struct svc_rqst *rqstp, struct nfsd4_compound_state *cstate, file_lock.fl_owner = (fl_owner_t)lockt->lt_stateowner; file_lock.fl_pid = current->tgid; file_lock.fl_flags = FL_POSIX; - file_lock.fl_lmops = &nfsd_posix_mng_ops; file_lock.fl_start = lockt->lt_offset; file_lock.fl_end = last_byte_offset(lockt->lt_offset, lockt->lt_length); diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c index d53a1838d6e..bed766e435b 100644 --- a/fs/notify/inotify/inotify_user.c +++ b/fs/notify/inotify/inotify_user.c @@ -427,10 +427,61 @@ static unsigned int inotify_poll(struct file *file, poll_table *wait) return ret; } +/* + * Get an inotify_kernel_event if one exists and is small + * enough to fit in "count". Return an error pointer if + * not large enough. + * + * Called with the device ev_mutex held. + */ +static struct inotify_kernel_event *get_one_event(struct inotify_device *dev, + size_t count) +{ + size_t event_size = sizeof(struct inotify_event); + struct inotify_kernel_event *kevent; + + if (list_empty(&dev->events)) + return NULL; + + kevent = inotify_dev_get_event(dev); + if (kevent->name) + event_size += kevent->event.len; + + if (event_size > count) + return ERR_PTR(-EINVAL); + + remove_kevent(dev, kevent); + return kevent; +} + +/* + * Copy an event to user space, returning how much we copied. + * + * We already checked that the event size is smaller than the + * buffer we had in "get_one_event()" above. + */ +static ssize_t copy_event_to_user(struct inotify_kernel_event *kevent, + char __user *buf) +{ + size_t event_size = sizeof(struct inotify_event); + + if (copy_to_user(buf, &kevent->event, event_size)) + return -EFAULT; + + if (kevent->name) { + buf += event_size; + + if (copy_to_user(buf, kevent->name, kevent->event.len)) + return -EFAULT; + + event_size += kevent->event.len; + } + return event_size; +} + static ssize_t inotify_read(struct file *file, char __user *buf, size_t count, loff_t *pos) { - size_t event_size = sizeof (struct inotify_event); struct inotify_device *dev; char __user *start; int ret; @@ -440,81 +491,43 @@ static ssize_t inotify_read(struct file *file, char __user *buf, dev = file->private_data; while (1) { + struct inotify_kernel_event *kevent; prepare_to_wait(&dev->wq, &wait, TASK_INTERRUPTIBLE); mutex_lock(&dev->ev_mutex); - if (!list_empty(&dev->events)) { - ret = 0; - break; - } + kevent = get_one_event(dev, count); mutex_unlock(&dev->ev_mutex); - if (file->f_flags & O_NONBLOCK) { - ret = -EAGAIN; - break; - } - - if (signal_pending(current)) { - ret = -EINTR; - break; + if (kevent) { + ret = PTR_ERR(kevent); + if (IS_ERR(kevent)) + break; + ret = copy_event_to_user(kevent, buf); + free_kevent(kevent); + if (ret < 0) + break; + buf += ret; + count -= ret; + continue; } - schedule(); - } - - finish_wait(&dev->wq, &wait); - if (ret) - return ret; - - while (1) { - struct inotify_kernel_event *kevent; - - ret = buf - start; - if (list_empty(&dev->events)) + ret = -EAGAIN; + if (file->f_flags & O_NONBLOCK) break; - - kevent = inotify_dev_get_event(dev); - if (event_size + kevent->event.len > count) { - if (ret == 0 && count > 0) { - /* - * could not get a single event because we - * didn't have enough buffer space. - */ - ret = -EINVAL; - } + ret = -EINTR; + if (signal_pending(current)) break; - } - remove_kevent(dev, kevent); - /* - * Must perform the copy_to_user outside the mutex in order - * to avoid a lock order reversal with mmap_sem. - */ - mutex_unlock(&dev->ev_mutex); - - if (copy_to_user(buf, &kevent->event, event_size)) { - ret = -EFAULT; + if (start != buf) break; - } - buf += event_size; - count -= event_size; - - if (kevent->name) { - if (copy_to_user(buf, kevent->name, kevent->event.len)){ - ret = -EFAULT; - break; - } - buf += kevent->event.len; - count -= kevent->event.len; - } - - free_kevent(kevent); - mutex_lock(&dev->ev_mutex); + schedule(); } - mutex_unlock(&dev->ev_mutex); + finish_wait(&dev->wq, &wait); + if (start != buf && ret != -EFAULT) + ret = buf - start; return ret; } diff --git a/fs/ntfs/Kconfig b/fs/ntfs/Kconfig new file mode 100644 index 00000000000..f5a868cc915 --- /dev/null +++ b/fs/ntfs/Kconfig @@ -0,0 +1,78 @@ +config NTFS_FS + tristate "NTFS file system support" + select NLS + help + NTFS is the file system of Microsoft Windows NT, 2000, XP and 2003. + + Saying Y or M here enables read support. There is partial, but + safe, write support available. For write support you must also + say Y to "NTFS write support" below. + + There are also a number of user-space tools available, called + ntfsprogs. These include ntfsundelete and ntfsresize, that work + without NTFS support enabled in the kernel. + + This is a rewrite from scratch of Linux NTFS support and replaced + the old NTFS code starting with Linux 2.5.11. A backport to + the Linux 2.4 kernel series is separately available as a patch + from the project web site. + + For more information see <file:Documentation/filesystems/ntfs.txt> + and <http://www.linux-ntfs.org/>. + + To compile this file system support as a module, choose M here: the + module will be called ntfs. + + If you are not using Windows NT, 2000, XP or 2003 in addition to + Linux on your computer it is safe to say N. + +config NTFS_DEBUG + bool "NTFS debugging support" + depends on NTFS_FS + help + If you are experiencing any problems with the NTFS file system, say + Y here. This will result in additional consistency checks to be + performed by the driver as well as additional debugging messages to + be written to the system log. Note that debugging messages are + disabled by default. To enable them, supply the option debug_msgs=1 + at the kernel command line when booting the kernel or as an option + to insmod when loading the ntfs module. Once the driver is active, + you can enable debugging messages by doing (as root): + echo 1 > /proc/sys/fs/ntfs-debug + Replacing the "1" with "0" would disable debug messages. + + If you leave debugging messages disabled, this results in little + overhead, but enabling debug messages results in very significant + slowdown of the system. + + When reporting bugs, please try to have available a full dump of + debugging messages while the misbehaviour was occurring. + +config NTFS_RW + bool "NTFS write support" + depends on NTFS_FS + help + This enables the partial, but safe, write support in the NTFS driver. + + The only supported operation is overwriting existing files, without + changing the file length. No file or directory creation, deletion or + renaming is possible. Note only non-resident files can be written to + so you may find that some very small files (<500 bytes or so) cannot + be written to. + + While we cannot guarantee that it will not damage any data, we have + so far not received a single report where the driver would have + damaged someones data so we assume it is perfectly safe to use. + + Note: While write support is safe in this version (a rewrite from + scratch of the NTFS support), it should be noted that the old NTFS + write support, included in Linux 2.5.10 and before (since 1997), + is not safe. + + This is currently useful with TopologiLinux. TopologiLinux is run + on top of any DOS/Microsoft Windows system without partitioning your + hard disk. Unlike other Linux distributions TopologiLinux does not + need its own partition. For more information see + <http://topologi-linux.sourceforge.net/> + + It is perfectly safe to say N here. diff --git a/fs/ocfs2/Kconfig b/fs/ocfs2/Kconfig new file mode 100644 index 00000000000..701b7a3a872 --- /dev/null +++ b/fs/ocfs2/Kconfig @@ -0,0 +1,85 @@ +config OCFS2_FS + tristate "OCFS2 file system support" + depends on NET && SYSFS + select CONFIGFS_FS + select JBD2 + select CRC32 + select QUOTA + select QUOTA_TREE + help + OCFS2 is a general purpose extent based shared disk cluster file + system with many similarities to ext3. It supports 64 bit inode + numbers, and has automatically extending metadata groups which may + also make it attractive for non-clustered use. + + You'll want to install the ocfs2-tools package in order to at least + get "mount.ocfs2". + + Project web page: http://oss.oracle.com/projects/ocfs2 + Tools web page: http://oss.oracle.com/projects/ocfs2-tools + OCFS2 mailing lists: http://oss.oracle.com/projects/ocfs2/mailman/ + + For more information on OCFS2, see the file + <file:Documentation/filesystems/ocfs2.txt>. + +config OCFS2_FS_O2CB + tristate "O2CB Kernelspace Clustering" + depends on OCFS2_FS + default y + help + OCFS2 includes a simple kernelspace clustering package, the OCFS2 + Cluster Base. It only requires a very small userspace component + to configure it. This comes with the standard ocfs2-tools package. + O2CB is limited to maintaining a cluster for OCFS2 file systems. + It cannot manage any other cluster applications. + + It is always safe to say Y here, as the clustering method is + run-time selectable. + +config OCFS2_FS_USERSPACE_CLUSTER + tristate "OCFS2 Userspace Clustering" + depends on OCFS2_FS && DLM + default y + help + This option will allow OCFS2 to use userspace clustering services + in conjunction with the DLM in fs/dlm. If you are using a + userspace cluster manager, say Y here. + + It is safe to say Y, as the clustering method is run-time + selectable. + +config OCFS2_FS_STATS + bool "OCFS2 statistics" + depends on OCFS2_FS + default y + help + This option allows some fs statistics to be captured. Enabling + this option may increase the memory consumption. + +config OCFS2_DEBUG_MASKLOG + bool "OCFS2 logging support" + depends on OCFS2_FS + default y + help + The ocfs2 filesystem has an extensive logging system. The system + allows selection of events to log via files in /sys/o2cb/logmask/. + This option will enlarge your kernel, but it allows debugging of + ocfs2 filesystem issues. + +config OCFS2_DEBUG_FS + bool "OCFS2 expensive checks" + depends on OCFS2_FS + default n + help + This option will enable expensive consistency checks. Enable + this option for debugging only as it is likely to decrease + performance of the filesystem. + +config OCFS2_FS_POSIX_ACL + bool "OCFS2 POSIX Access Control Lists" + depends on OCFS2_FS + select FS_POSIX_ACL + default n + help + Posix Access Control Lists (ACLs) support permissions for users and + groups beyond the owner/group/world scheme. diff --git a/fs/ocfs2/quota_global.c b/fs/ocfs2/quota_global.c index 6aff8f2d3e4..f4efa89baee 100644 --- a/fs/ocfs2/quota_global.c +++ b/fs/ocfs2/quota_global.c @@ -810,171 +810,6 @@ out: return status; } -/* This is difficult. We have to lock quota inode and start transaction - * in this function but we don't want to take the penalty of exlusive - * quota file lock when we are just going to use cached structures. So - * we just take read lock check whether we have dquot cached and if so, - * we don't have to take the write lock... */ -static int ocfs2_dquot_initialize(struct inode *inode, int type) -{ - handle_t *handle = NULL; - int status = 0; - struct super_block *sb = inode->i_sb; - struct ocfs2_mem_dqinfo *oinfo; - int exclusive = 0; - int cnt; - qid_t id; - - mlog_entry_void(); - - for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - if (type != -1 && cnt != type) - continue; - if (!sb_has_quota_active(sb, cnt)) - continue; - oinfo = sb_dqinfo(sb, cnt)->dqi_priv; - status = ocfs2_lock_global_qf(oinfo, 0); - if (status < 0) - goto out; - /* This is just a performance optimization not a reliable test. - * Since we hold an inode lock, noone can actually release - * the structure until we are finished with initialization. */ - if (inode->i_dquot[cnt] != NODQUOT) { - ocfs2_unlock_global_qf(oinfo, 0); - continue; - } - /* When we have inode lock, we know that no dquot_release() can - * run and thus we can safely check whether we need to - * read+modify global file to get quota information or whether - * our node already has it. */ - if (cnt == USRQUOTA) - id = inode->i_uid; - else if (cnt == GRPQUOTA) - id = inode->i_gid; - else - BUG(); - /* Obtain exclusion from quota off... */ - down_write(&sb_dqopt(sb)->dqptr_sem); - exclusive = !dquot_is_cached(sb, id, cnt); - up_write(&sb_dqopt(sb)->dqptr_sem); - if (exclusive) { - status = ocfs2_lock_global_qf(oinfo, 1); - if (status < 0) { - exclusive = 0; - mlog_errno(status); - goto out_ilock; - } - handle = ocfs2_start_trans(OCFS2_SB(sb), - ocfs2_calc_qinit_credits(sb, cnt)); - if (IS_ERR(handle)) { - status = PTR_ERR(handle); - mlog_errno(status); - goto out_ilock; - } - } - dquot_initialize(inode, cnt); - if (exclusive) { - ocfs2_commit_trans(OCFS2_SB(sb), handle); - ocfs2_unlock_global_qf(oinfo, 1); - } - ocfs2_unlock_global_qf(oinfo, 0); - } - mlog_exit(0); - return 0; -out_ilock: - if (exclusive) - ocfs2_unlock_global_qf(oinfo, 1); - ocfs2_unlock_global_qf(oinfo, 0); -out: - mlog_exit(status); - return status; -} - -static int ocfs2_dquot_drop_slow(struct inode *inode) -{ - int status = 0; - int cnt; - int got_lock[MAXQUOTAS] = {0, 0}; - handle_t *handle; - struct super_block *sb = inode->i_sb; - struct ocfs2_mem_dqinfo *oinfo; - - for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - if (!sb_has_quota_active(sb, cnt)) - continue; - oinfo = sb_dqinfo(sb, cnt)->dqi_priv; - status = ocfs2_lock_global_qf(oinfo, 1); - if (status < 0) - goto out; - got_lock[cnt] = 1; - } - handle = ocfs2_start_trans(OCFS2_SB(sb), - ocfs2_calc_qinit_credits(sb, USRQUOTA) + - ocfs2_calc_qinit_credits(sb, GRPQUOTA)); - if (IS_ERR(handle)) { - status = PTR_ERR(handle); - mlog_errno(status); - goto out; - } - dquot_drop(inode); - ocfs2_commit_trans(OCFS2_SB(sb), handle); -out: - for (cnt = 0; cnt < MAXQUOTAS; cnt++) - if (got_lock[cnt]) { - oinfo = sb_dqinfo(sb, cnt)->dqi_priv; - ocfs2_unlock_global_qf(oinfo, 1); - } - return status; -} - -/* See the comment before ocfs2_dquot_initialize. */ -static int ocfs2_dquot_drop(struct inode *inode) -{ - int status = 0; - struct super_block *sb = inode->i_sb; - struct ocfs2_mem_dqinfo *oinfo; - int exclusive = 0; - int cnt; - int got_lock[MAXQUOTAS] = {0, 0}; - - mlog_entry_void(); - for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - if (!sb_has_quota_active(sb, cnt)) - continue; - oinfo = sb_dqinfo(sb, cnt)->dqi_priv; - status = ocfs2_lock_global_qf(oinfo, 0); - if (status < 0) - goto out; - got_lock[cnt] = 1; - } - /* Lock against anyone releasing references so that when when we check - * we know we are not going to be last ones to release dquot */ - down_write(&sb_dqopt(sb)->dqptr_sem); - /* Urgh, this is a terrible hack :( */ - for (cnt = 0; cnt < MAXQUOTAS; cnt++) { - if (inode->i_dquot[cnt] != NODQUOT && - atomic_read(&inode->i_dquot[cnt]->dq_count) > 1) { - exclusive = 1; - break; - } - } - if (!exclusive) - dquot_drop_locked(inode); - up_write(&sb_dqopt(sb)->dqptr_sem); -out: - for (cnt = 0; cnt < MAXQUOTAS; cnt++) - if (got_lock[cnt]) { - oinfo = sb_dqinfo(sb, cnt)->dqi_priv; - ocfs2_unlock_global_qf(oinfo, 0); - } - /* In case we bailed out because we had to do expensive locking - * do it now... */ - if (exclusive) - status = ocfs2_dquot_drop_slow(inode); - mlog_exit(status); - return status; -} - static struct dquot *ocfs2_alloc_dquot(struct super_block *sb, int type) { struct ocfs2_dquot *dquot = @@ -991,8 +826,8 @@ static void ocfs2_destroy_dquot(struct dquot *dquot) } struct dquot_operations ocfs2_quota_operations = { - .initialize = ocfs2_dquot_initialize, - .drop = ocfs2_dquot_drop, + .initialize = dquot_initialize, + .drop = dquot_drop, .alloc_space = dquot_alloc_space, .alloc_inode = dquot_alloc_inode, .free_space = dquot_free_space, diff --git a/fs/omfs/Kconfig b/fs/omfs/Kconfig new file mode 100644 index 00000000000..b1b9a0aba6f --- /dev/null +++ b/fs/omfs/Kconfig @@ -0,0 +1,13 @@ +config OMFS_FS + tristate "SonicBlue Optimized MPEG File System support" + depends on BLOCK + select CRC_ITU_T + help + This is the proprietary file system used by the Rio Karma music + player and ReplayTV DVR. Despite the name, this filesystem is not + more efficient than a standard FS for MPEG files, in fact likely + the opposite is true. Say Y if you have either of these devices + and wish to mount its disk. + + To compile this file system support as a module, choose M here: the + module will be called omfs. If unsure, say N. diff --git a/fs/qnx4/Kconfig b/fs/qnx4/Kconfig new file mode 100644 index 00000000000..be8e0e1445b --- /dev/null +++ b/fs/qnx4/Kconfig @@ -0,0 +1,25 @@ +config QNX4FS_FS + tristate "QNX4 file system support (read only)" + depends on BLOCK + help + This is the file system used by the real-time operating systems + QNX 4 and QNX 6 (the latter is also called QNX RTP). + Further information is available at <http://www.qnx.com/>. + Say Y if you intend to mount QNX hard disks or floppies. + Unless you say Y to "QNX4FS read-write support" below, you will + only be able to read these file systems. + + To compile this file system support as a module, choose M here: the + module will be called qnx4. + + If you don't know whether you need it, then you don't need it: + answer N. + +config QNX4FS_RW + bool "QNX4FS write support (DANGEROUS)" + depends on QNX4FS_FS && EXPERIMENTAL && BROKEN + help + Say Y if you want to test write support for QNX4 file systems. + + It's currently broken, so for now: + answer N. diff --git a/fs/reiserfs/Kconfig b/fs/reiserfs/Kconfig new file mode 100644 index 00000000000..949b8c6addc --- /dev/null +++ b/fs/reiserfs/Kconfig @@ -0,0 +1,85 @@ +config REISERFS_FS + tristate "Reiserfs support" + help + Stores not just filenames but the files themselves in a balanced + tree. Uses journalling. + + Balanced trees are more efficient than traditional file system + architectural foundations. + + In general, ReiserFS is as fast as ext2, but is very efficient with + large directories and small files. Additional patches are needed + for NFS and quotas, please see <http://www.namesys.com/> for links. + + It is more easily extended to have features currently found in + database and keyword search systems than block allocation based file + systems are. The next version will be so extended, and will support + plugins consistent with our motto ``It takes more than a license to + make source code open.'' + + Read <http://www.namesys.com/> to learn more about reiserfs. + + Sponsored by Threshold Networks, Emusic.com, and Bigstorage.com. + + If you like it, you can pay us to add new features to it that you + need, buy a support contract, or pay us to port it to another OS. + +config REISERFS_CHECK + bool "Enable reiserfs debug mode" + depends on REISERFS_FS + help + If you set this to Y, then ReiserFS will perform every check it can + possibly imagine of its internal consistency throughout its + operation. It will also go substantially slower. More than once we + have forgotten that this was on, and then gone despondent over the + latest benchmarks.:-) Use of this option allows our team to go all + out in checking for consistency when debugging without fear of its + effect on end users. If you are on the verge of sending in a bug + report, say Y and you might get a useful error message. Almost + everyone should say N. + +config REISERFS_PROC_INFO + bool "Stats in /proc/fs/reiserfs" + depends on REISERFS_FS && PROC_FS + help + Create under /proc/fs/reiserfs a hierarchy of files, displaying + various ReiserFS statistics and internal data at the expense of + making your kernel or module slightly larger (+8 KB). This also + increases the amount of kernel memory required for each mount. + Almost everyone but ReiserFS developers and people fine-tuning + reiserfs or tracing problems should say N. + +config REISERFS_FS_XATTR + bool "ReiserFS extended attributes" + depends on REISERFS_FS + help + Extended attributes are name:value pairs associated with inodes by + the kernel or by users (see the attr(5) manual page, or visit + <http://acl.bestbits.at/> for details). + + If unsure, say N. + +config REISERFS_FS_POSIX_ACL + bool "ReiserFS POSIX Access Control Lists" + depends on REISERFS_FS_XATTR + select FS_POSIX_ACL + help + Posix Access Control Lists (ACLs) support permissions for users and + groups beyond the owner/group/world scheme. + + To learn more about Access Control Lists, visit the Posix ACLs for + Linux website <http://acl.bestbits.at/>. + + If you don't know what Access Control Lists are, say N + +config REISERFS_FS_SECURITY + bool "ReiserFS Security Labels" + depends on REISERFS_FS_XATTR + help + Security labels support alternative access control models + implemented by security modules like SELinux. This option + enables an extended attribute handler for file security + labels in the ReiserFS filesystem. + + If you are not using a security module that requires using + extended attributes for file security labels, say N. diff --git a/fs/romfs/Kconfig b/fs/romfs/Kconfig new file mode 100644 index 00000000000..1a17020f9fa --- /dev/null +++ b/fs/romfs/Kconfig @@ -0,0 +1,16 @@ +config ROMFS_FS + tristate "ROM file system support" + depends on BLOCK + ---help--- + This is a very small read-only file system mainly intended for + initial ram disks of installation disks, but it could be used for + other read-only media as well. Read + <file:Documentation/filesystems/romfs.txt> for details. + + To compile this file system support as a module, choose M here: the + module will be called romfs. Note that the file system of your + root partition (the one containing the directory /) cannot be a + module. + + If you don't know whether you need it, then you don't need it: + answer N. diff --git a/fs/smbfs/Kconfig b/fs/smbfs/Kconfig new file mode 100644 index 00000000000..e668127c8b2 --- /dev/null +++ b/fs/smbfs/Kconfig @@ -0,0 +1,55 @@ +config SMB_FS + tristate "SMB file system support (OBSOLETE, please use CIFS)" + depends on INET + select NLS + help + SMB (Server Message Block) is the protocol Windows for Workgroups + (WfW), Windows 95/98, Windows NT and OS/2 Lan Manager use to share + files and printers over local networks. Saying Y here allows you to + mount their file systems (often called "shares" in this context) and + access them just like any other Unix directory. Currently, this + works only if the Windows machines use TCP/IP as the underlying + transport protocol, and not NetBEUI. For details, read + <file:Documentation/filesystems/smbfs.txt> and the SMB-HOWTO, + available from <http://www.tldp.org/docs.html#howto>. + + Note: if you just want your box to act as an SMB *server* and make + files and printing services available to Windows clients (which need + to have a TCP/IP stack), you don't need to say Y here; you can use + the program SAMBA (available from <ftp://ftp.samba.org/pub/samba/>) + for that. + + General information about how to connect Linux, Windows machines and + Macs is on the WWW at <http://www.eats.com/linux_mac_win.html>. + + To compile the SMB support as a module, choose M here: + the module will be called smbfs. Most people say N, however. + +config SMB_NLS_DEFAULT + bool "Use a default NLS" + depends on SMB_FS + help + Enabling this will make smbfs use nls translations by default. You + need to specify the local charset (CONFIG_NLS_DEFAULT) in the nls + settings and you need to give the default nls for the SMB server as + CONFIG_SMB_NLS_REMOTE. + + The nls settings can be changed at mount time, if your smbmount + supports that, using the codepage and iocharset parameters. + + smbmount from samba 2.2.0 or later supports this. + +config SMB_NLS_REMOTE + string "Default Remote NLS Option" + depends on SMB_NLS_DEFAULT + default "cp437" + help + This setting allows you to specify a default value for which + codepage the server uses. If this field is left blank no + translations will be done by default. The local codepage/charset + default to CONFIG_NLS_DEFAULT. + + The nls settings can be changed at mount time, if your smbmount + supports that, using the codepage and iocharset parameters. + + smbmount from samba 2.2.0 or later supports this. diff --git a/fs/squashfs/Kconfig b/fs/squashfs/Kconfig new file mode 100644 index 00000000000..25a00d19d68 --- /dev/null +++ b/fs/squashfs/Kconfig @@ -0,0 +1,51 @@ +config SQUASHFS + tristate "SquashFS 4.0 - Squashed file system support" + depends on BLOCK + select ZLIB_INFLATE + help + Saying Y here includes support for SquashFS 4.0 (a Compressed + Read-Only File System). Squashfs is a highly compressed read-only + filesystem for Linux. It uses zlib compression to compress both + files, inodes and directories. Inodes in the system are very small + and all blocks are packed to minimise data overhead. Block sizes + greater than 4K are supported up to a maximum of 1 Mbytes (default + block size 128K). SquashFS 4.0 supports 64 bit filesystems and files + (larger than 4GB), full uid/gid information, hard links and + timestamps. + + Squashfs is intended for general read-only filesystem use, for + archival use (i.e. in cases where a .tar.gz file may be used), and in + embedded systems where low overhead is needed. Further information + and tools are available from http://squashfs.sourceforge.net. + + If you want to compile this as a module ( = code which can be + inserted in and removed from the running kernel whenever you want), + say M here and read <file:Documentation/modules.txt>. The module + will be called squashfs. Note that the root file system (the one + containing the directory /) cannot be compiled as a module. + + If unsure, say N. + +config SQUASHFS_EMBEDDED + + bool "Additional option for memory-constrained systems" + depends on SQUASHFS + default n + help + Saying Y here allows you to specify cache size. + + If unsure, say N. + +config SQUASHFS_FRAGMENT_CACHE_SIZE + int "Number of fragments cached" if SQUASHFS_EMBEDDED + depends on SQUASHFS + default "3" + help + By default SquashFS caches the last 3 fragments read from + the filesystem. Increasing this amount may mean SquashFS + has to re-read fragments less often from disk, at the expense + of extra system memory. Decreasing this amount will mean + SquashFS uses less memory at the expense of extra reads from disk. + + Note there must be at least one cached fragment. Anything + much more than three will probably not make much difference. diff --git a/fs/sysfs/Kconfig b/fs/sysfs/Kconfig new file mode 100644 index 00000000000..f4b67588b9d --- /dev/null +++ b/fs/sysfs/Kconfig @@ -0,0 +1,23 @@ +config SYSFS + bool "sysfs file system support" if EMBEDDED + default y + help + The sysfs filesystem is a virtual filesystem that the kernel uses to + export internal kernel objects, their attributes, and their + relationships to one another. + + Users can use sysfs to ascertain useful information about the running + kernel, such as the devices the kernel has discovered on each bus and + which driver each is bound to. sysfs can also be used to tune devices + and other kernel subsystems. + + Some system agents rely on the information in sysfs to operate. + /sbin/hotplug uses device and object attributes in sysfs to assist in + delegating policy decisions, like persistently naming devices. + + sysfs is currently used by the block subsystem to mount the root + partition. If sysfs is disabled you must specify the boot device on + the kernel boot command line via its major and minor numbers. For + example, "root=03:01" for /dev/hda1. + + Designers of embedded systems may wish to say N here to conserve space. diff --git a/fs/sysfs/bin.c b/fs/sysfs/bin.c index 66f6e58a7e4..f2c478c3424 100644 --- a/fs/sysfs/bin.c +++ b/fs/sysfs/bin.c @@ -63,6 +63,9 @@ read(struct file *file, char __user *userbuf, size_t bytes, loff_t *off) int count = min_t(size_t, bytes, PAGE_SIZE); char *temp; + if (!bytes) + return 0; + if (size) { if (offs > size) return 0; @@ -131,6 +134,9 @@ static ssize_t write(struct file *file, const char __user *userbuf, int count = min_t(size_t, bytes, PAGE_SIZE); char *temp; + if (!bytes) + return 0; + if (size) { if (offs > size) return 0; diff --git a/fs/sysv/Kconfig b/fs/sysv/Kconfig new file mode 100644 index 00000000000..33aeb4b75db --- /dev/null +++ b/fs/sysv/Kconfig @@ -0,0 +1,36 @@ +config SYSV_FS + tristate "System V/Xenix/V7/Coherent file system support" + depends on BLOCK + help + SCO, Xenix and Coherent are commercial Unix systems for Intel + machines, and Version 7 was used on the DEC PDP-11. Saying Y + here would allow you to read from their floppies and hard disk + partitions. + + If you have floppies or hard disk partitions like that, it is likely + that they contain binaries from those other Unix systems; in order + to run these binaries, you will want to install linux-abi which is + a set of kernel modules that lets you run SCO, Xenix, Wyse, + UnixWare, Dell Unix and System V programs under Linux. It is + available via FTP (user: ftp) from + <ftp://ftp.openlinux.org/pub/people/hch/linux-abi/>). + NOTE: that will work only for binaries from Intel-based systems; + PDP ones will have to wait until somebody ports Linux to -11 ;-) + + If you only intend to mount files from some other Unix over the + network using NFS, you don't need the System V file system support + (but you need NFS file system support obviously). + + Note that this option is generally not needed for floppies, since a + good portable way to transport files and directories between unixes + (and even other operating systems) is given by the tar program ("man + tar" or preferably "info tar"). Note also that this option has + nothing whatsoever to do with the option "System V IPC". Read about + the System V file system in + <file:Documentation/filesystems/sysv-fs.txt>. + Saying Y here will enlarge your kernel by about 27 KB. + + To compile this as a module, choose M here: the module will be called + sysv. + + If you haven't heard about all of this before, it's safe to say N. diff --git a/fs/udf/Kconfig b/fs/udf/Kconfig new file mode 100644 index 00000000000..0e0e99bd6bc --- /dev/null +++ b/fs/udf/Kconfig @@ -0,0 +1,18 @@ +config UDF_FS + tristate "UDF file system support" + select CRC_ITU_T + help + This is the new file system used on some CD-ROMs and DVDs. Say Y if + you intend to mount DVD discs or CDRW's written in packet mode, or + if written to by other UDF utilities, such as DirectCD. + Please read <file:Documentation/filesystems/udf.txt>. + + To compile this file system support as a module, choose M here: the + module will be called udf. + + If unsure, say N. + +config UDF_NLS + bool + default y + depends on (UDF_FS=m && NLS) || (UDF_FS=y && NLS=y) diff --git a/fs/ufs/Kconfig b/fs/ufs/Kconfig new file mode 100644 index 00000000000..e4f10a40768 --- /dev/null +++ b/fs/ufs/Kconfig @@ -0,0 +1,43 @@ +config UFS_FS + tristate "UFS file system support (read only)" + depends on BLOCK + help + BSD and derivate versions of Unix (such as SunOS, FreeBSD, NetBSD, + OpenBSD and NeXTstep) use a file system called UFS. Some System V + Unixes can create and mount hard disk partitions and diskettes using + this file system as well. Saying Y here will allow you to read from + these partitions; if you also want to write to them, say Y to the + experimental "UFS file system write support", below. Please read the + file <file:Documentation/filesystems/ufs.txt> for more information. + + The recently released UFS2 variant (used in FreeBSD 5.x) is + READ-ONLY supported. + + Note that this option is generally not needed for floppies, since a + good portable way to transport files and directories between unixes + (and even other operating systems) is given by the tar program ("man + tar" or preferably "info tar"). + + When accessing NeXTstep files, you may need to convert them from the + NeXT character set to the Latin1 character set; use the program + recode ("info recode") for this purpose. + + To compile the UFS file system support as a module, choose M here: the + module will be called ufs. + + If you haven't heard about all of this before, it's safe to say N. + +config UFS_FS_WRITE + bool "UFS file system write support (DANGEROUS)" + depends on UFS_FS && EXPERIMENTAL + help + Say Y here if you want to try writing to UFS partitions. This is + experimental, so you should back up your UFS partitions beforehand. + +config UFS_DEBUG + bool "UFS debugging" + depends on UFS_FS + help + If you are experiencing any problems with the UFS filesystem, say + Y here. This will result in _many_ additional debugging messages to be + written to the system log. diff --git a/fs/xfs/Kconfig b/fs/xfs/Kconfig index 3f53dd101f9..29228f5899c 100644 --- a/fs/xfs/Kconfig +++ b/fs/xfs/Kconfig @@ -1,6 +1,7 @@ config XFS_FS tristate "XFS filesystem support" depends on BLOCK + select EXPORTFS help XFS is a high performance journaling filesystem which originated on the SGI IRIX platform. It is completely multi-threaded, can diff --git a/fs/xfs/linux-2.6/xfs_ioctl.c b/fs/xfs/linux-2.6/xfs_ioctl.c index e5be1e0be80..4bd112313f3 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.c +++ b/fs/xfs/linux-2.6/xfs_ioctl.c @@ -50,12 +50,14 @@ #include "xfs_vnodeops.h" #include "xfs_quota.h" #include "xfs_inode_item.h" +#include "xfs_export.h" #include <linux/capability.h> #include <linux/dcache.h> #include <linux/mount.h> #include <linux/namei.h> #include <linux/pagemap.h> +#include <linux/exportfs.h> /* * xfs_find_handle maps from userspace xfs_fsop_handlereq structure to @@ -164,97 +166,69 @@ xfs_find_handle( return 0; } - /* - * Convert userspace handle data into inode. - * - * We use the fact that all the fsop_handlereq ioctl calls have a data - * structure argument whose first component is always a xfs_fsop_handlereq_t, - * so we can pass that sub structure into this handy, shared routine. - * - * If no error, caller must always iput the returned inode. + * No need to do permission checks on the various pathname components + * as the handle operations are privileged. */ STATIC int -xfs_vget_fsop_handlereq( - xfs_mount_t *mp, - struct inode *parinode, /* parent inode pointer */ - xfs_fsop_handlereq_t *hreq, - struct inode **inode) +xfs_handle_acceptable( + void *context, + struct dentry *dentry) +{ + return 1; +} + +/* + * Convert userspace handle data into a dentry. + */ +struct dentry * +xfs_handle_to_dentry( + struct file *parfilp, + void __user *uhandle, + u32 hlen) { - void __user *hanp; - size_t hlen; - xfs_fid_t *xfid; - xfs_handle_t *handlep; xfs_handle_t handle; - xfs_inode_t *ip; - xfs_ino_t ino; - __u32 igen; - int error; + struct xfs_fid64 fid; /* * Only allow handle opens under a directory. */ - if (!S_ISDIR(parinode->i_mode)) - return XFS_ERROR(ENOTDIR); - - hanp = hreq->ihandle; - hlen = hreq->ihandlen; - handlep = &handle; - - if (hlen < sizeof(handlep->ha_fsid) || hlen > sizeof(*handlep)) - return XFS_ERROR(EINVAL); - if (copy_from_user(handlep, hanp, hlen)) - return XFS_ERROR(EFAULT); - if (hlen < sizeof(*handlep)) - memset(((char *)handlep) + hlen, 0, sizeof(*handlep) - hlen); - if (hlen > sizeof(handlep->ha_fsid)) { - if (handlep->ha_fid.fid_len != - (hlen - sizeof(handlep->ha_fsid) - - sizeof(handlep->ha_fid.fid_len)) || - handlep->ha_fid.fid_pad) - return XFS_ERROR(EINVAL); - } - - /* - * Crack the handle, obtain the inode # & generation # - */ - xfid = (struct xfs_fid *)&handlep->ha_fid; - if (xfid->fid_len == sizeof(*xfid) - sizeof(xfid->fid_len)) { - ino = xfid->fid_ino; - igen = xfid->fid_gen; - } else { - return XFS_ERROR(EINVAL); - } - - /* - * Get the XFS inode, building a Linux inode to go with it. - */ - error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_SHARED, &ip, 0); - if (error) - return error; - if (ip == NULL) - return XFS_ERROR(EIO); - if (ip->i_d.di_gen != igen) { - xfs_iput_new(ip, XFS_ILOCK_SHARED); - return XFS_ERROR(ENOENT); - } - - xfs_iunlock(ip, XFS_ILOCK_SHARED); + if (!S_ISDIR(parfilp->f_path.dentry->d_inode->i_mode)) + return ERR_PTR(-ENOTDIR); + + if (hlen != sizeof(xfs_handle_t)) + return ERR_PTR(-EINVAL); + if (copy_from_user(&handle, uhandle, hlen)) + return ERR_PTR(-EFAULT); + if (handle.ha_fid.fid_len != + sizeof(handle.ha_fid) - sizeof(handle.ha_fid.fid_len)) + return ERR_PTR(-EINVAL); + + memset(&fid, 0, sizeof(struct fid)); + fid.ino = handle.ha_fid.fid_ino; + fid.gen = handle.ha_fid.fid_gen; + + return exportfs_decode_fh(parfilp->f_path.mnt, (struct fid *)&fid, 3, + FILEID_INO32_GEN | XFS_FILEID_TYPE_64FLAG, + xfs_handle_acceptable, NULL); +} - *inode = VFS_I(ip); - return 0; +STATIC struct dentry * +xfs_handlereq_to_dentry( + struct file *parfilp, + xfs_fsop_handlereq_t *hreq) +{ + return xfs_handle_to_dentry(parfilp, hreq->ihandle, hreq->ihandlen); } int xfs_open_by_handle( - xfs_mount_t *mp, - xfs_fsop_handlereq_t *hreq, struct file *parfilp, - struct inode *parinode) + xfs_fsop_handlereq_t *hreq) { const struct cred *cred = current_cred(); int error; - int new_fd; + int fd; int permflag; struct file *filp; struct inode *inode; @@ -263,19 +237,21 @@ xfs_open_by_handle( if (!capable(CAP_SYS_ADMIN)) return -XFS_ERROR(EPERM); - error = xfs_vget_fsop_handlereq(mp, parinode, hreq, &inode); - if (error) - return -error; + dentry = xfs_handlereq_to_dentry(parfilp, hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); + inode = dentry->d_inode; /* Restrict xfs_open_by_handle to directories & regular files. */ if (!(S_ISREG(inode->i_mode) || S_ISDIR(inode->i_mode))) { - iput(inode); - return -XFS_ERROR(EINVAL); + error = -XFS_ERROR(EPERM); + goto out_dput; } #if BITS_PER_LONG != 32 hreq->oflags |= O_LARGEFILE; #endif + /* Put open permission in namei format. */ permflag = hreq->oflags; if ((permflag+1) & O_ACCMODE) @@ -285,50 +261,45 @@ xfs_open_by_handle( if ((!(permflag & O_APPEND) || (permflag & O_TRUNC)) && (permflag & FMODE_WRITE) && IS_APPEND(inode)) { - iput(inode); - return -XFS_ERROR(EPERM); + error = -XFS_ERROR(EPERM); + goto out_dput; } if ((permflag & FMODE_WRITE) && IS_IMMUTABLE(inode)) { - iput(inode); - return -XFS_ERROR(EACCES); + error = -XFS_ERROR(EACCES); + goto out_dput; } /* Can't write directories. */ - if ( S_ISDIR(inode->i_mode) && (permflag & FMODE_WRITE)) { - iput(inode); - return -XFS_ERROR(EISDIR); + if (S_ISDIR(inode->i_mode) && (permflag & FMODE_WRITE)) { + error = -XFS_ERROR(EISDIR); + goto out_dput; } - if ((new_fd = get_unused_fd()) < 0) { - iput(inode); - return new_fd; + fd = get_unused_fd(); + if (fd < 0) { + error = fd; + goto out_dput; } - dentry = d_obtain_alias(inode); - if (IS_ERR(dentry)) { - put_unused_fd(new_fd); - return PTR_ERR(dentry); - } - - /* Ensure umount returns EBUSY on umounts while this file is open. */ - mntget(parfilp->f_path.mnt); - - /* Create file pointer. */ - filp = dentry_open(dentry, parfilp->f_path.mnt, hreq->oflags, cred); + filp = dentry_open(dentry, mntget(parfilp->f_path.mnt), + hreq->oflags, cred); if (IS_ERR(filp)) { - put_unused_fd(new_fd); - return -XFS_ERROR(-PTR_ERR(filp)); + put_unused_fd(fd); + return PTR_ERR(filp); } if (inode->i_mode & S_IFREG) { - /* invisible operation should not change atime */ filp->f_flags |= O_NOATIME; filp->f_mode |= FMODE_NOCMTIME; } - fd_install(new_fd, filp); - return new_fd; + fd_install(fd, filp); + return fd; + + out_dput: + dput(dentry); + return error; } /* @@ -359,11 +330,10 @@ do_readlink( int xfs_readlink_by_handle( - xfs_mount_t *mp, - xfs_fsop_handlereq_t *hreq, - struct inode *parinode) + struct file *parfilp, + xfs_fsop_handlereq_t *hreq) { - struct inode *inode; + struct dentry *dentry; __u32 olen; void *link; int error; @@ -371,26 +341,28 @@ xfs_readlink_by_handle( if (!capable(CAP_SYS_ADMIN)) return -XFS_ERROR(EPERM); - error = xfs_vget_fsop_handlereq(mp, parinode, hreq, &inode); - if (error) - return -error; + dentry = xfs_handlereq_to_dentry(parfilp, hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); /* Restrict this handle operation to symlinks only. */ - if (!S_ISLNK(inode->i_mode)) { + if (!S_ISLNK(dentry->d_inode->i_mode)) { error = -XFS_ERROR(EINVAL); - goto out_iput; + goto out_dput; } if (copy_from_user(&olen, hreq->ohandlen, sizeof(__u32))) { error = -XFS_ERROR(EFAULT); - goto out_iput; + goto out_dput; } link = kmalloc(MAXPATHLEN+1, GFP_KERNEL); - if (!link) - goto out_iput; + if (!link) { + error = -XFS_ERROR(ENOMEM); + goto out_dput; + } - error = -xfs_readlink(XFS_I(inode), link); + error = -xfs_readlink(XFS_I(dentry->d_inode), link); if (error) goto out_kfree; error = do_readlink(hreq->ohandle, olen, link); @@ -399,32 +371,31 @@ xfs_readlink_by_handle( out_kfree: kfree(link); - out_iput: - iput(inode); + out_dput: + dput(dentry); return error; } STATIC int xfs_fssetdm_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { int error; struct fsdmidata fsd; xfs_fsop_setdm_handlereq_t dmhreq; - struct inode *inode; + struct dentry *dentry; if (!capable(CAP_MKNOD)) return -XFS_ERROR(EPERM); if (copy_from_user(&dmhreq, arg, sizeof(xfs_fsop_setdm_handlereq_t))) return -XFS_ERROR(EFAULT); - error = xfs_vget_fsop_handlereq(mp, parinode, &dmhreq.hreq, &inode); - if (error) - return -error; + dentry = xfs_handlereq_to_dentry(parfilp, &dmhreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); - if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) { + if (IS_IMMUTABLE(dentry->d_inode) || IS_APPEND(dentry->d_inode)) { error = -XFS_ERROR(EPERM); goto out; } @@ -434,24 +405,23 @@ xfs_fssetdm_by_handle( goto out; } - error = -xfs_set_dmattrs(XFS_I(inode), fsd.fsd_dmevmask, + error = -xfs_set_dmattrs(XFS_I(dentry->d_inode), fsd.fsd_dmevmask, fsd.fsd_dmstate); out: - iput(inode); + dput(dentry); return error; } STATIC int xfs_attrlist_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { - int error; + int error = -ENOMEM; attrlist_cursor_kern_t *cursor; xfs_fsop_attrlist_handlereq_t al_hreq; - struct inode *inode; + struct dentry *dentry; char *kbuf; if (!capable(CAP_SYS_ADMIN)) @@ -467,16 +437,16 @@ xfs_attrlist_by_handle( if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE)) return -XFS_ERROR(EINVAL); - error = xfs_vget_fsop_handlereq(mp, parinode, &al_hreq.hreq, &inode); - if (error) - goto out; + dentry = xfs_handlereq_to_dentry(parfilp, &al_hreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL); if (!kbuf) - goto out_vn_rele; + goto out_dput; cursor = (attrlist_cursor_kern_t *)&al_hreq.pos; - error = xfs_attr_list(XFS_I(inode), kbuf, al_hreq.buflen, + error = -xfs_attr_list(XFS_I(dentry->d_inode), kbuf, al_hreq.buflen, al_hreq.flags, cursor); if (error) goto out_kfree; @@ -486,10 +456,9 @@ xfs_attrlist_by_handle( out_kfree: kfree(kbuf); - out_vn_rele: - iput(inode); - out: - return -error; + out_dput: + dput(dentry); + return error; } int @@ -564,15 +533,13 @@ xfs_attrmulti_attr_remove( STATIC int xfs_attrmulti_by_handle( - xfs_mount_t *mp, - void __user *arg, struct file *parfilp, - struct inode *parinode) + void __user *arg) { int error; xfs_attr_multiop_t *ops; xfs_fsop_attrmulti_handlereq_t am_hreq; - struct inode *inode; + struct dentry *dentry; unsigned int i, size; char *attr_name; @@ -581,19 +548,19 @@ xfs_attrmulti_by_handle( if (copy_from_user(&am_hreq, arg, sizeof(xfs_fsop_attrmulti_handlereq_t))) return -XFS_ERROR(EFAULT); - error = xfs_vget_fsop_handlereq(mp, parinode, &am_hreq.hreq, &inode); - if (error) - goto out; + dentry = xfs_handlereq_to_dentry(parfilp, &am_hreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); error = E2BIG; size = am_hreq.opcount * sizeof(xfs_attr_multiop_t); if (!size || size > 16 * PAGE_SIZE) - goto out_vn_rele; + goto out_dput; error = ENOMEM; ops = kmalloc(size, GFP_KERNEL); if (!ops) - goto out_vn_rele; + goto out_dput; error = EFAULT; if (copy_from_user(ops, am_hreq.ops, size)) @@ -615,25 +582,28 @@ xfs_attrmulti_by_handle( switch (ops[i].am_opcode) { case ATTR_OP_GET: - ops[i].am_error = xfs_attrmulti_attr_get(inode, - attr_name, ops[i].am_attrvalue, - &ops[i].am_length, ops[i].am_flags); + ops[i].am_error = xfs_attrmulti_attr_get( + dentry->d_inode, attr_name, + ops[i].am_attrvalue, &ops[i].am_length, + ops[i].am_flags); break; case ATTR_OP_SET: ops[i].am_error = mnt_want_write(parfilp->f_path.mnt); if (ops[i].am_error) break; - ops[i].am_error = xfs_attrmulti_attr_set(inode, - attr_name, ops[i].am_attrvalue, - ops[i].am_length, ops[i].am_flags); + ops[i].am_error = xfs_attrmulti_attr_set( + dentry->d_inode, attr_name, + ops[i].am_attrvalue, ops[i].am_length, + ops[i].am_flags); mnt_drop_write(parfilp->f_path.mnt); break; case ATTR_OP_REMOVE: ops[i].am_error = mnt_want_write(parfilp->f_path.mnt); if (ops[i].am_error) break; - ops[i].am_error = xfs_attrmulti_attr_remove(inode, - attr_name, ops[i].am_flags); + ops[i].am_error = xfs_attrmulti_attr_remove( + dentry->d_inode, attr_name, + ops[i].am_flags); mnt_drop_write(parfilp->f_path.mnt); break; default: @@ -647,9 +617,8 @@ xfs_attrmulti_by_handle( kfree(attr_name); out_kfree_ops: kfree(ops); - out_vn_rele: - iput(inode); - out: + out_dput: + dput(dentry); return -error; } @@ -1440,23 +1409,23 @@ xfs_file_ioctl( if (copy_from_user(&hreq, arg, sizeof(xfs_fsop_handlereq_t))) return -XFS_ERROR(EFAULT); - return xfs_open_by_handle(mp, &hreq, filp, inode); + return xfs_open_by_handle(filp, &hreq); } case XFS_IOC_FSSETDM_BY_HANDLE: - return xfs_fssetdm_by_handle(mp, arg, inode); + return xfs_fssetdm_by_handle(filp, arg); case XFS_IOC_READLINK_BY_HANDLE: { xfs_fsop_handlereq_t hreq; if (copy_from_user(&hreq, arg, sizeof(xfs_fsop_handlereq_t))) return -XFS_ERROR(EFAULT); - return xfs_readlink_by_handle(mp, &hreq, inode); + return xfs_readlink_by_handle(filp, &hreq); } case XFS_IOC_ATTRLIST_BY_HANDLE: - return xfs_attrlist_by_handle(mp, arg, inode); + return xfs_attrlist_by_handle(filp, arg); case XFS_IOC_ATTRMULTI_BY_HANDLE: - return xfs_attrmulti_by_handle(mp, arg, filp, inode); + return xfs_attrmulti_by_handle(filp, arg); case XFS_IOC_SWAPEXT: { struct xfs_swapext sxp; diff --git a/fs/xfs/linux-2.6/xfs_ioctl.h b/fs/xfs/linux-2.6/xfs_ioctl.h index 8c16bf2d7e0..7bd7c6afc1e 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl.h +++ b/fs/xfs/linux-2.6/xfs_ioctl.h @@ -34,16 +34,13 @@ xfs_find_handle( extern int xfs_open_by_handle( - xfs_mount_t *mp, - xfs_fsop_handlereq_t *hreq, struct file *parfilp, - struct inode *parinode); + xfs_fsop_handlereq_t *hreq); extern int xfs_readlink_by_handle( - xfs_mount_t *mp, - xfs_fsop_handlereq_t *hreq, - struct inode *parinode); + struct file *parfilp, + xfs_fsop_handlereq_t *hreq); extern int xfs_attrmulti_attr_get( @@ -67,6 +64,12 @@ xfs_attrmulti_attr_remove( char *name, __uint32_t flags); +extern struct dentry * +xfs_handle_to_dentry( + struct file *parfilp, + void __user *uhandle, + u32 hlen); + extern long xfs_file_ioctl( struct file *filp, diff --git a/fs/xfs/linux-2.6/xfs_ioctl32.c b/fs/xfs/linux-2.6/xfs_ioctl32.c index 50903ad3182..c70c4e3db79 100644 --- a/fs/xfs/linux-2.6/xfs_ioctl32.c +++ b/fs/xfs/linux-2.6/xfs_ioctl32.c @@ -17,6 +17,7 @@ */ #include <linux/compat.h> #include <linux/ioctl.h> +#include <linux/mount.h> #include <asm/uaccess.h> #include "xfs.h" #include "xfs_fs.h" @@ -340,96 +341,24 @@ xfs_compat_handlereq_copyin( return 0; } -/* - * Convert userspace handle data into inode. - * - * We use the fact that all the fsop_handlereq ioctl calls have a data - * structure argument whose first component is always a xfs_fsop_handlereq_t, - * so we can pass that sub structure into this handy, shared routine. - * - * If no error, caller must always iput the returned inode. - */ -STATIC int -xfs_vget_fsop_handlereq_compat( - xfs_mount_t *mp, - struct inode *parinode, /* parent inode pointer */ - compat_xfs_fsop_handlereq_t *hreq, - struct inode **inode) +STATIC struct dentry * +xfs_compat_handlereq_to_dentry( + struct file *parfilp, + compat_xfs_fsop_handlereq_t *hreq) { - void __user *hanp; - size_t hlen; - xfs_fid_t *xfid; - xfs_handle_t *handlep; - xfs_handle_t handle; - xfs_inode_t *ip; - xfs_ino_t ino; - __u32 igen; - int error; - - /* - * Only allow handle opens under a directory. - */ - if (!S_ISDIR(parinode->i_mode)) - return XFS_ERROR(ENOTDIR); - - hanp = compat_ptr(hreq->ihandle); - hlen = hreq->ihandlen; - handlep = &handle; - - if (hlen < sizeof(handlep->ha_fsid) || hlen > sizeof(*handlep)) - return XFS_ERROR(EINVAL); - if (copy_from_user(handlep, hanp, hlen)) - return XFS_ERROR(EFAULT); - if (hlen < sizeof(*handlep)) - memset(((char *)handlep) + hlen, 0, sizeof(*handlep) - hlen); - if (hlen > sizeof(handlep->ha_fsid)) { - if (handlep->ha_fid.fid_len != - (hlen - sizeof(handlep->ha_fsid) - - sizeof(handlep->ha_fid.fid_len)) || - handlep->ha_fid.fid_pad) - return XFS_ERROR(EINVAL); - } - - /* - * Crack the handle, obtain the inode # & generation # - */ - xfid = (struct xfs_fid *)&handlep->ha_fid; - if (xfid->fid_len == sizeof(*xfid) - sizeof(xfid->fid_len)) { - ino = xfid->fid_ino; - igen = xfid->fid_gen; - } else { - return XFS_ERROR(EINVAL); - } - - /* - * Get the XFS inode, building a Linux inode to go with it. - */ - error = xfs_iget(mp, NULL, ino, 0, XFS_ILOCK_SHARED, &ip, 0); - if (error) - return error; - if (ip == NULL) - return XFS_ERROR(EIO); - if (ip->i_d.di_gen != igen) { - xfs_iput_new(ip, XFS_ILOCK_SHARED); - return XFS_ERROR(ENOENT); - } - - xfs_iunlock(ip, XFS_ILOCK_SHARED); - - *inode = VFS_I(ip); - return 0; + return xfs_handle_to_dentry(parfilp, + compat_ptr(hreq->ihandle), hreq->ihandlen); } STATIC int xfs_compat_attrlist_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { int error; attrlist_cursor_kern_t *cursor; compat_xfs_fsop_attrlist_handlereq_t al_hreq; - struct inode *inode; + struct dentry *dentry; char *kbuf; if (!capable(CAP_SYS_ADMIN)) @@ -446,17 +375,17 @@ xfs_compat_attrlist_by_handle( if (al_hreq.flags & ~(ATTR_ROOT | ATTR_SECURE)) return -XFS_ERROR(EINVAL); - error = xfs_vget_fsop_handlereq_compat(mp, parinode, &al_hreq.hreq, - &inode); - if (error) - goto out; + dentry = xfs_compat_handlereq_to_dentry(parfilp, &al_hreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); + error = -ENOMEM; kbuf = kmalloc(al_hreq.buflen, GFP_KERNEL); if (!kbuf) - goto out_vn_rele; + goto out_dput; cursor = (attrlist_cursor_kern_t *)&al_hreq.pos; - error = xfs_attr_list(XFS_I(inode), kbuf, al_hreq.buflen, + error = -xfs_attr_list(XFS_I(dentry->d_inode), kbuf, al_hreq.buflen, al_hreq.flags, cursor); if (error) goto out_kfree; @@ -466,22 +395,20 @@ xfs_compat_attrlist_by_handle( out_kfree: kfree(kbuf); - out_vn_rele: - iput(inode); - out: - return -error; + out_dput: + dput(dentry); + return error; } STATIC int xfs_compat_attrmulti_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { int error; compat_xfs_attr_multiop_t *ops; compat_xfs_fsop_attrmulti_handlereq_t am_hreq; - struct inode *inode; + struct dentry *dentry; unsigned int i, size; char *attr_name; @@ -491,20 +418,19 @@ xfs_compat_attrmulti_by_handle( sizeof(compat_xfs_fsop_attrmulti_handlereq_t))) return -XFS_ERROR(EFAULT); - error = xfs_vget_fsop_handlereq_compat(mp, parinode, &am_hreq.hreq, - &inode); - if (error) - goto out; + dentry = xfs_compat_handlereq_to_dentry(parfilp, &am_hreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); error = E2BIG; size = am_hreq.opcount * sizeof(compat_xfs_attr_multiop_t); if (!size || size > 16 * PAGE_SIZE) - goto out_vn_rele; + goto out_dput; error = ENOMEM; ops = kmalloc(size, GFP_KERNEL); if (!ops) - goto out_vn_rele; + goto out_dput; error = EFAULT; if (copy_from_user(ops, compat_ptr(am_hreq.ops), size)) @@ -527,20 +453,29 @@ xfs_compat_attrmulti_by_handle( switch (ops[i].am_opcode) { case ATTR_OP_GET: - ops[i].am_error = xfs_attrmulti_attr_get(inode, - attr_name, + ops[i].am_error = xfs_attrmulti_attr_get( + dentry->d_inode, attr_name, compat_ptr(ops[i].am_attrvalue), &ops[i].am_length, ops[i].am_flags); break; case ATTR_OP_SET: - ops[i].am_error = xfs_attrmulti_attr_set(inode, - attr_name, + ops[i].am_error = mnt_want_write(parfilp->f_path.mnt); + if (ops[i].am_error) + break; + ops[i].am_error = xfs_attrmulti_attr_set( + dentry->d_inode, attr_name, compat_ptr(ops[i].am_attrvalue), ops[i].am_length, ops[i].am_flags); + mnt_drop_write(parfilp->f_path.mnt); break; case ATTR_OP_REMOVE: - ops[i].am_error = xfs_attrmulti_attr_remove(inode, - attr_name, ops[i].am_flags); + ops[i].am_error = mnt_want_write(parfilp->f_path.mnt); + if (ops[i].am_error) + break; + ops[i].am_error = xfs_attrmulti_attr_remove( + dentry->d_inode, attr_name, + ops[i].am_flags); + mnt_drop_write(parfilp->f_path.mnt); break; default: ops[i].am_error = EINVAL; @@ -553,22 +488,20 @@ xfs_compat_attrmulti_by_handle( kfree(attr_name); out_kfree_ops: kfree(ops); - out_vn_rele: - iput(inode); - out: + out_dput: + dput(dentry); return -error; } STATIC int xfs_compat_fssetdm_by_handle( - xfs_mount_t *mp, - void __user *arg, - struct inode *parinode) + struct file *parfilp, + void __user *arg) { int error; struct fsdmidata fsd; compat_xfs_fsop_setdm_handlereq_t dmhreq; - struct inode *inode; + struct dentry *dentry; if (!capable(CAP_MKNOD)) return -XFS_ERROR(EPERM); @@ -576,12 +509,11 @@ xfs_compat_fssetdm_by_handle( sizeof(compat_xfs_fsop_setdm_handlereq_t))) return -XFS_ERROR(EFAULT); - error = xfs_vget_fsop_handlereq_compat(mp, parinode, &dmhreq.hreq, - &inode); - if (error) - return -error; + dentry = xfs_compat_handlereq_to_dentry(parfilp, &dmhreq.hreq); + if (IS_ERR(dentry)) + return PTR_ERR(dentry); - if (IS_IMMUTABLE(inode) || IS_APPEND(inode)) { + if (IS_IMMUTABLE(dentry->d_inode) || IS_APPEND(dentry->d_inode)) { error = -XFS_ERROR(EPERM); goto out; } @@ -591,11 +523,11 @@ xfs_compat_fssetdm_by_handle( goto out; } - error = -xfs_set_dmattrs(XFS_I(inode), fsd.fsd_dmevmask, + error = -xfs_set_dmattrs(XFS_I(dentry->d_inode), fsd.fsd_dmevmask, fsd.fsd_dmstate); out: - iput(inode); + dput(dentry); return error; } @@ -722,21 +654,21 @@ xfs_file_compat_ioctl( if (xfs_compat_handlereq_copyin(&hreq, arg)) return -XFS_ERROR(EFAULT); - return xfs_open_by_handle(mp, &hreq, filp, inode); + return xfs_open_by_handle(filp, &hreq); } case XFS_IOC_READLINK_BY_HANDLE_32: { struct xfs_fsop_handlereq hreq; if (xfs_compat_handlereq_copyin(&hreq, arg)) return -XFS_ERROR(EFAULT); - return xfs_readlink_by_handle(mp, &hreq, inode); + return xfs_readlink_by_handle(filp, &hreq); } case XFS_IOC_ATTRLIST_BY_HANDLE_32: - return xfs_compat_attrlist_by_handle(mp, arg, inode); + return xfs_compat_attrlist_by_handle(filp, arg); case XFS_IOC_ATTRMULTI_BY_HANDLE_32: - return xfs_compat_attrmulti_by_handle(mp, arg, inode); + return xfs_compat_attrmulti_by_handle(filp, arg); case XFS_IOC_FSSETDM_BY_HANDLE_32: - return xfs_compat_fssetdm_by_handle(mp, arg, inode); + return xfs_compat_fssetdm_by_handle(filp, arg); default: return -XFS_ERROR(ENOIOCTLCMD); } diff --git a/fs/xfs/linux-2.6/xfs_super.c b/fs/xfs/linux-2.6/xfs_super.c index 95a97108036..c71e226da7f 100644 --- a/fs/xfs/linux-2.6/xfs_super.c +++ b/fs/xfs/linux-2.6/xfs_super.c @@ -1197,6 +1197,7 @@ xfs_fs_remount( struct xfs_mount *mp = XFS_M(sb); substring_t args[MAX_OPT_ARGS]; char *p; + int error; while ((p = strsep(&options, ",")) != NULL) { int token; @@ -1247,11 +1248,25 @@ xfs_fs_remount( } } - /* rw/ro -> rw */ + /* ro -> rw */ if ((mp->m_flags & XFS_MOUNT_RDONLY) && !(*flags & MS_RDONLY)) { mp->m_flags &= ~XFS_MOUNT_RDONLY; if (mp->m_flags & XFS_MOUNT_BARRIER) xfs_mountfs_check_barriers(mp); + + /* + * If this is the first remount to writeable state we + * might have some superblock changes to update. + */ + if (mp->m_update_flags) { + error = xfs_mount_log_sb(mp, mp->m_update_flags); + if (error) { + cmn_err(CE_WARN, + "XFS: failed to write sb changes"); + return error; + } + mp->m_update_flags = 0; + } } /* rw -> ro */ diff --git a/fs/xfs/quota/xfs_dquot.c b/fs/xfs/quota/xfs_dquot.c index 591ca6602bf..6543c0b2975 100644 --- a/fs/xfs/quota/xfs_dquot.c +++ b/fs/xfs/quota/xfs_dquot.c @@ -73,6 +73,8 @@ int xfs_dqreq_num; int xfs_dqerror_mod = 33; #endif +static struct lock_class_key xfs_dquot_other_class; + /* * Allocate and initialize a dquot. We don't always allocate fresh memory; * we try to reclaim a free dquot if the number of incore dquots are above @@ -139,7 +141,15 @@ xfs_qm_dqinit( ASSERT(dqp->q_trace); xfs_dqtrace_entry(dqp, "DQRECLAIMED_INIT"); #endif - } + } + + /* + * In either case we need to make sure group quotas have a different + * lock class than user quotas, to make sure lockdep knows we can + * locks of one of each at the same time. + */ + if (!(type & XFS_DQ_USER)) + lockdep_set_class(&dqp->q_qlock, &xfs_dquot_other_class); /* * log item gets initialized later @@ -421,7 +431,7 @@ xfs_qm_dqalloc( /* * Initialize the bmap freelist prior to calling bmapi code. */ - XFS_BMAP_INIT(&flist, &firstblock); + xfs_bmap_init(&flist, &firstblock); xfs_ilock(quotip, XFS_ILOCK_EXCL); /* * Return if this type of quotas is turned off while we didn't @@ -1383,6 +1393,12 @@ xfs_dqunlock_nonotify( mutex_unlock(&(dqp->q_qlock)); } +/* + * Lock two xfs_dquot structures. + * + * To avoid deadlocks we always lock the quota structure with + * the lowerd id first. + */ void xfs_dqlock2( xfs_dquot_t *d1, @@ -1392,18 +1408,16 @@ xfs_dqlock2( ASSERT(d1 != d2); if (be32_to_cpu(d1->q_core.d_id) > be32_to_cpu(d2->q_core.d_id)) { - xfs_dqlock(d2); - xfs_dqlock(d1); + mutex_lock(&d2->q_qlock); + mutex_lock_nested(&d1->q_qlock, XFS_QLOCK_NESTED); } else { - xfs_dqlock(d1); - xfs_dqlock(d2); - } - } else { - if (d1) { - xfs_dqlock(d1); - } else if (d2) { - xfs_dqlock(d2); + mutex_lock(&d1->q_qlock); + mutex_lock_nested(&d2->q_qlock, XFS_QLOCK_NESTED); } + } else if (d1) { + mutex_lock(&d1->q_qlock); + } else if (d2) { + mutex_lock(&d2->q_qlock); } } diff --git a/fs/xfs/quota/xfs_dquot.h b/fs/xfs/quota/xfs_dquot.h index 7e455337e2b..d443e93b433 100644 --- a/fs/xfs/quota/xfs_dquot.h +++ b/fs/xfs/quota/xfs_dquot.h @@ -97,6 +97,16 @@ typedef struct xfs_dquot { #define dq_hashlist q_lists.dqm_hashlist #define dq_flags q_lists.dqm_flags +/* + * Lock hierachy for q_qlock: + * XFS_QLOCK_NORMAL is the implicit default, + * XFS_QLOCK_NESTED is the dquot with the higher id in xfs_dqlock2 + */ +enum { + XFS_QLOCK_NORMAL = 0, + XFS_QLOCK_NESTED, +}; + #define XFS_DQHOLD(dqp) ((dqp)->q_nrefs++) #ifdef DEBUG diff --git a/fs/xfs/quota/xfs_qm.c b/fs/xfs/quota/xfs_qm.c index 6b13960cf31..7a2beb64314 100644 --- a/fs/xfs/quota/xfs_qm.c +++ b/fs/xfs/quota/xfs_qm.c @@ -1070,6 +1070,13 @@ xfs_qm_sync( return 0; } +/* + * The hash chains and the mplist use the same xfs_dqhash structure as + * their list head, but we can take the mplist qh_lock and one of the + * hash qh_locks at the same time without any problem as they aren't + * related. + */ +static struct lock_class_key xfs_quota_mplist_class; /* * This initializes all the quota information that's kept in the @@ -1105,6 +1112,8 @@ xfs_qm_init_quotainfo( } xfs_qm_list_init(&qinf->qi_dqlist, "mpdqlist", 0); + lockdep_set_class(&qinf->qi_dqlist.qh_lock, &xfs_quota_mplist_class); + qinf->qi_dqreclaims = 0; /* mutex used to serialize quotaoffs */ diff --git a/fs/xfs/xfs_ag.h b/fs/xfs/xfs_ag.h index d3b3cf74299..143d63ecb20 100644 --- a/fs/xfs/xfs_ag.h +++ b/fs/xfs/xfs_ag.h @@ -244,8 +244,8 @@ typedef struct xfs_perag #define XFS_AG_CHECK_DADDR(mp,d,len) \ ((len) == 1 ? \ ASSERT((d) == XFS_SB_DADDR || \ - XFS_DADDR_TO_AGBNO(mp, d) != XFS_SB_DADDR) : \ - ASSERT(XFS_DADDR_TO_AGNO(mp, d) == \ - XFS_DADDR_TO_AGNO(mp, (d) + (len) - 1))) + xfs_daddr_to_agbno(mp, d) != XFS_SB_DADDR) : \ + ASSERT(xfs_daddr_to_agno(mp, d) == \ + xfs_daddr_to_agno(mp, (d) + (len) - 1))) #endif /* __XFS_AG_H__ */ diff --git a/fs/xfs/xfs_alloc_btree.c b/fs/xfs/xfs_alloc_btree.c index 733cb75a8c5..c10c3a292d3 100644 --- a/fs/xfs/xfs_alloc_btree.c +++ b/fs/xfs/xfs_alloc_btree.c @@ -115,7 +115,7 @@ xfs_allocbt_free_block( xfs_agblock_t bno; int error; - bno = XFS_DADDR_TO_AGBNO(cur->bc_mp, XFS_BUF_ADDR(bp)); + bno = xfs_daddr_to_agbno(cur->bc_mp, XFS_BUF_ADDR(bp)); error = xfs_alloc_put_freelist(cur->bc_tp, agbp, NULL, bno, 1); if (error) return error; diff --git a/fs/xfs/xfs_attr.c b/fs/xfs/xfs_attr.c index f7cdc28aff4..5fde1654b43 100644 --- a/fs/xfs/xfs_attr.c +++ b/fs/xfs/xfs_attr.c @@ -374,7 +374,7 @@ xfs_attr_set_int(xfs_inode_t *dp, struct xfs_name *name, * It won't fit in the shortform, transform to a leaf block. * GROT: another possible req'mt for a double-split btree op. */ - XFS_BMAP_INIT(args.flist, args.firstblock); + xfs_bmap_init(args.flist, args.firstblock); error = xfs_attr_shortform_to_leaf(&args); if (!error) { error = xfs_bmap_finish(&args.trans, args.flist, @@ -956,7 +956,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args) * Commit that transaction so that the node_addname() call * can manage its own transactions. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_node(args); if (!error) { error = xfs_bmap_finish(&args->trans, args->flist, @@ -1057,7 +1057,7 @@ xfs_attr_leaf_addname(xfs_da_args_t *args) * If the result is small enough, shrink it all into the inode. */ if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_shortform(bp, args, forkoff); /* bp is gone due to xfs_da_shrink_inode */ if (!error) { @@ -1135,7 +1135,7 @@ xfs_attr_leaf_removename(xfs_da_args_t *args) * If the result is small enough, shrink it all into the inode. */ if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_shortform(bp, args, forkoff); /* bp is gone due to xfs_da_shrink_inode */ if (!error) { @@ -1290,7 +1290,7 @@ restart: * have been a b-tree. */ xfs_da_state_free(state); - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_node(args); if (!error) { error = xfs_bmap_finish(&args->trans, @@ -1331,7 +1331,7 @@ restart: * in the index/blkno/rmtblkno/rmtblkcnt fields and * in the index2/blkno2/rmtblkno2/rmtblkcnt2 fields. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_da_split(state); if (!error) { error = xfs_bmap_finish(&args->trans, args->flist, @@ -1443,7 +1443,7 @@ restart: * Check to see if the tree needs to be collapsed. */ if (retval && (state->path.active > 1)) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_da_join(state); if (!error) { error = xfs_bmap_finish(&args->trans, @@ -1579,7 +1579,7 @@ xfs_attr_node_removename(xfs_da_args_t *args) * Check to see if the tree needs to be collapsed. */ if (retval && (state->path.active > 1)) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_da_join(state); if (!error) { error = xfs_bmap_finish(&args->trans, args->flist, @@ -1630,7 +1630,7 @@ xfs_attr_node_removename(xfs_da_args_t *args) == XFS_ATTR_LEAF_MAGIC); if ((forkoff = xfs_attr_shortform_allfit(bp, dp))) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_attr_leaf_to_shortform(bp, args, forkoff); /* bp is gone due to xfs_da_shrink_inode */ if (!error) { @@ -2069,7 +2069,7 @@ xfs_attr_rmtval_set(xfs_da_args_t *args) /* * Allocate a single extent, up to the size of the value. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi(args->trans, dp, (xfs_fileoff_t)lblkno, blkcnt, @@ -2123,7 +2123,7 @@ xfs_attr_rmtval_set(xfs_da_args_t *args) /* * Try to remember where we decided to put the value. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi(NULL, dp, (xfs_fileoff_t)lblkno, args->rmtblkcnt, @@ -2188,7 +2188,7 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) /* * Try to remember where we decided to put the value. */ - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); nmap = 1; error = xfs_bmapi(NULL, args->dp, (xfs_fileoff_t)lblkno, args->rmtblkcnt, @@ -2229,7 +2229,7 @@ xfs_attr_rmtval_remove(xfs_da_args_t *args) blkcnt = args->rmtblkcnt; done = 0; while (!done) { - XFS_BMAP_INIT(args->flist, args->firstblock); + xfs_bmap_init(args->flist, args->firstblock); error = xfs_bunmapi(args->trans, args->dp, lblkno, blkcnt, XFS_BMAPI_ATTRFORK | XFS_BMAPI_METADATA, 1, args->firstblock, args->flist, diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c index 138308e70d1..c852cd65aae 100644 --- a/fs/xfs/xfs_bmap.c +++ b/fs/xfs/xfs_bmap.c @@ -595,9 +595,9 @@ xfs_bmap_add_extent( xfs_iext_insert(ifp, 0, 1, new); ASSERT(cur == NULL); ifp->if_lastex = 0; - if (!ISNULLSTARTBLOCK(new->br_startblock)) { + if (!isnullstartblock(new->br_startblock)) { XFS_IFORK_NEXT_SET(ip, whichfork, 1); - logflags = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork); + logflags = XFS_ILOG_CORE | xfs_ilog_fext(whichfork); } else logflags = 0; /* DELTA: single new extent */ @@ -613,7 +613,7 @@ xfs_bmap_add_extent( /* * Any kind of new delayed allocation goes here. */ - else if (ISNULLSTARTBLOCK(new->br_startblock)) { + else if (isnullstartblock(new->br_startblock)) { if (cur) ASSERT((cur->bc_private.b.flags & XFS_BTCUR_BPRV_WASDEL) == 0); @@ -644,11 +644,11 @@ xfs_bmap_add_extent( * in a delayed or unwritten allocation with a real one, or * converting real back to unwritten. */ - if (!ISNULLSTARTBLOCK(new->br_startblock) && + if (!isnullstartblock(new->br_startblock) && new->br_startoff + new->br_blockcount > prev.br_startoff) { if (prev.br_state != XFS_EXT_UNWRITTEN && - ISNULLSTARTBLOCK(prev.br_startblock)) { - da_old = STARTBLOCKVAL(prev.br_startblock); + isnullstartblock(prev.br_startblock)) { + da_old = startblockval(prev.br_startblock); if (cur) ASSERT(cur->bc_private.b.flags & XFS_BTCUR_BPRV_WASDEL); @@ -803,7 +803,7 @@ xfs_bmap_add_extent_delay_real( */ if (STATE_SET_TEST(LEFT_VALID, idx > 0)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &LEFT); - STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(LEFT.br_startblock)); + STATE_SET(LEFT_DELAY, isnullstartblock(LEFT.br_startblock)); } STATE_SET(LEFT_CONTIG, STATE_TEST(LEFT_VALID) && !STATE_TEST(LEFT_DELAY) && @@ -820,7 +820,7 @@ xfs_bmap_add_extent_delay_real( idx < ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t) - 1)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx + 1), &RIGHT); - STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(RIGHT.br_startblock)); + STATE_SET(RIGHT_DELAY, isnullstartblock(RIGHT.br_startblock)); } STATE_SET(RIGHT_CONTIG, STATE_TEST(RIGHT_VALID) && !STATE_TEST(RIGHT_DELAY) && @@ -1019,8 +1019,8 @@ xfs_bmap_add_extent_delay_real( goto done; } temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), - STARTBLOCKVAL(PREV.br_startblock)); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + startblockval(PREV.br_startblock)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("LF|LC", ip, idx, XFS_DATA_FORK); *dnew = temp; /* DELTA: The boundary between two in-core extents moved. */ @@ -1067,10 +1067,10 @@ xfs_bmap_add_extent_delay_real( goto done; } temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), - STARTBLOCKVAL(PREV.br_startblock) - + startblockval(PREV.br_startblock) - (cur ? cur->bc_private.b.allocated : 0)); ep = xfs_iext_get_ext(ifp, idx + 1); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("LF", ip, idx + 1, XFS_DATA_FORK); *dnew = temp; /* DELTA: One in-core extent is split in two. */ @@ -1110,8 +1110,8 @@ xfs_bmap_add_extent_delay_real( goto done; } temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), - STARTBLOCKVAL(PREV.br_startblock)); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + startblockval(PREV.br_startblock)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("RF|RC", ip, idx, XFS_DATA_FORK); *dnew = temp; /* DELTA: The boundary between two in-core extents moved. */ @@ -1157,10 +1157,10 @@ xfs_bmap_add_extent_delay_real( goto done; } temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), - STARTBLOCKVAL(PREV.br_startblock) - + startblockval(PREV.br_startblock) - (cur ? cur->bc_private.b.allocated : 0)); ep = xfs_iext_get_ext(ifp, idx); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("RF", ip, idx, XFS_DATA_FORK); *dnew = temp; /* DELTA: One in-core extent is split in two. */ @@ -1213,7 +1213,7 @@ xfs_bmap_add_extent_delay_real( } temp = xfs_bmap_worst_indlen(ip, temp); temp2 = xfs_bmap_worst_indlen(ip, temp2); - diff = (int)(temp + temp2 - STARTBLOCKVAL(PREV.br_startblock) - + diff = (int)(temp + temp2 - startblockval(PREV.br_startblock) - (cur ? cur->bc_private.b.allocated : 0)); if (diff > 0 && xfs_mod_incore_sb(ip->i_mount, XFS_SBS_FDBLOCKS, -((int64_t)diff), rsvd)) { @@ -1241,11 +1241,11 @@ xfs_bmap_add_extent_delay_real( } } ep = xfs_iext_get_ext(ifp, idx); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("0", ip, idx, XFS_DATA_FORK); XFS_BMAP_TRACE_PRE_UPDATE("0", ip, idx + 2, XFS_DATA_FORK); xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx + 2), - NULLSTARTBLOCK((int)temp2)); + nullstartblock((int)temp2)); XFS_BMAP_TRACE_POST_UPDATE("0", ip, idx + 2, XFS_DATA_FORK); *dnew = temp + temp2; /* DELTA: One in-core extent is split in three. */ @@ -1365,7 +1365,7 @@ xfs_bmap_add_extent_unwritten_real( */ if (STATE_SET_TEST(LEFT_VALID, idx > 0)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &LEFT); - STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(LEFT.br_startblock)); + STATE_SET(LEFT_DELAY, isnullstartblock(LEFT.br_startblock)); } STATE_SET(LEFT_CONTIG, STATE_TEST(LEFT_VALID) && !STATE_TEST(LEFT_DELAY) && @@ -1382,7 +1382,7 @@ xfs_bmap_add_extent_unwritten_real( idx < ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t) - 1)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx + 1), &RIGHT); - STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(RIGHT.br_startblock)); + STATE_SET(RIGHT_DELAY, isnullstartblock(RIGHT.br_startblock)); } STATE_SET(RIGHT_CONTIG, STATE_TEST(RIGHT_VALID) && !STATE_TEST(RIGHT_DELAY) && @@ -1889,13 +1889,13 @@ xfs_bmap_add_extent_hole_delay( ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK); ep = xfs_iext_get_ext(ifp, idx); state = 0; - ASSERT(ISNULLSTARTBLOCK(new->br_startblock)); + ASSERT(isnullstartblock(new->br_startblock)); /* * Check and set flags if this segment has a left neighbor */ if (STATE_SET_TEST(LEFT_VALID, idx > 0)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &left); - STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(left.br_startblock)); + STATE_SET(LEFT_DELAY, isnullstartblock(left.br_startblock)); } /* * Check and set flags if the current (right) segment exists. @@ -1905,7 +1905,7 @@ xfs_bmap_add_extent_hole_delay( idx < ip->i_df.if_bytes / (uint)sizeof(xfs_bmbt_rec_t))) { xfs_bmbt_get_all(ep, &right); - STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(right.br_startblock)); + STATE_SET(RIGHT_DELAY, isnullstartblock(right.br_startblock)); } /* * Set contiguity flags on the left and right neighbors. @@ -1938,12 +1938,12 @@ xfs_bmap_add_extent_hole_delay( XFS_BMAP_TRACE_PRE_UPDATE("LC|RC", ip, idx - 1, XFS_DATA_FORK); xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, idx - 1), temp); - oldlen = STARTBLOCKVAL(left.br_startblock) + - STARTBLOCKVAL(new->br_startblock) + - STARTBLOCKVAL(right.br_startblock); + oldlen = startblockval(left.br_startblock) + + startblockval(new->br_startblock) + + startblockval(right.br_startblock); newlen = xfs_bmap_worst_indlen(ip, temp); xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx - 1), - NULLSTARTBLOCK((int)newlen)); + nullstartblock((int)newlen)); XFS_BMAP_TRACE_POST_UPDATE("LC|RC", ip, idx - 1, XFS_DATA_FORK); XFS_BMAP_TRACE_DELETE("LC|RC", ip, idx, 1, XFS_DATA_FORK); @@ -1964,11 +1964,11 @@ xfs_bmap_add_extent_hole_delay( XFS_BMAP_TRACE_PRE_UPDATE("LC", ip, idx - 1, XFS_DATA_FORK); xfs_bmbt_set_blockcount(xfs_iext_get_ext(ifp, idx - 1), temp); - oldlen = STARTBLOCKVAL(left.br_startblock) + - STARTBLOCKVAL(new->br_startblock); + oldlen = startblockval(left.br_startblock) + + startblockval(new->br_startblock); newlen = xfs_bmap_worst_indlen(ip, temp); xfs_bmbt_set_startblock(xfs_iext_get_ext(ifp, idx - 1), - NULLSTARTBLOCK((int)newlen)); + nullstartblock((int)newlen)); XFS_BMAP_TRACE_POST_UPDATE("LC", ip, idx - 1, XFS_DATA_FORK); ip->i_df.if_lastex = idx - 1; @@ -1985,11 +1985,11 @@ xfs_bmap_add_extent_hole_delay( */ XFS_BMAP_TRACE_PRE_UPDATE("RC", ip, idx, XFS_DATA_FORK); temp = new->br_blockcount + right.br_blockcount; - oldlen = STARTBLOCKVAL(new->br_startblock) + - STARTBLOCKVAL(right.br_startblock); + oldlen = startblockval(new->br_startblock) + + startblockval(right.br_startblock); newlen = xfs_bmap_worst_indlen(ip, temp); xfs_bmbt_set_allf(ep, new->br_startoff, - NULLSTARTBLOCK((int)newlen), temp, right.br_state); + nullstartblock((int)newlen), temp, right.br_state); XFS_BMAP_TRACE_POST_UPDATE("RC", ip, idx, XFS_DATA_FORK); ip->i_df.if_lastex = idx; /* DELTA: One in-core extent grew into a hole. */ @@ -2085,7 +2085,7 @@ xfs_bmap_add_extent_hole_real( */ if (STATE_SET_TEST(LEFT_VALID, idx > 0)) { xfs_bmbt_get_all(xfs_iext_get_ext(ifp, idx - 1), &left); - STATE_SET(LEFT_DELAY, ISNULLSTARTBLOCK(left.br_startblock)); + STATE_SET(LEFT_DELAY, isnullstartblock(left.br_startblock)); } /* * Check and set flags if this segment has a current value. @@ -2095,7 +2095,7 @@ xfs_bmap_add_extent_hole_real( idx < ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t))) { xfs_bmbt_get_all(ep, &right); - STATE_SET(RIGHT_DELAY, ISNULLSTARTBLOCK(right.br_startblock)); + STATE_SET(RIGHT_DELAY, isnullstartblock(right.br_startblock)); } /* * We're inserting a real allocation between "left" and "right". @@ -2143,7 +2143,7 @@ xfs_bmap_add_extent_hole_real( XFS_IFORK_NEXT_SET(ip, whichfork, XFS_IFORK_NEXTENTS(ip, whichfork) - 1); if (cur == NULL) { - rval = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork); + rval = XFS_ILOG_CORE | xfs_ilog_fext(whichfork); } else { rval = XFS_ILOG_CORE; if ((error = xfs_bmbt_lookup_eq(cur, @@ -2185,7 +2185,7 @@ xfs_bmap_add_extent_hole_real( XFS_BMAP_TRACE_POST_UPDATE("LC", ip, idx - 1, whichfork); ifp->if_lastex = idx - 1; if (cur == NULL) { - rval = XFS_ILOG_FEXT(whichfork); + rval = xfs_ilog_fext(whichfork); } else { rval = 0; if ((error = xfs_bmbt_lookup_eq(cur, @@ -2220,7 +2220,7 @@ xfs_bmap_add_extent_hole_real( XFS_BMAP_TRACE_POST_UPDATE("RC", ip, idx, whichfork); ifp->if_lastex = idx; if (cur == NULL) { - rval = XFS_ILOG_FEXT(whichfork); + rval = xfs_ilog_fext(whichfork); } else { rval = 0; if ((error = xfs_bmbt_lookup_eq(cur, @@ -2254,7 +2254,7 @@ xfs_bmap_add_extent_hole_real( XFS_IFORK_NEXT_SET(ip, whichfork, XFS_IFORK_NEXTENTS(ip, whichfork) + 1); if (cur == NULL) { - rval = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork); + rval = XFS_ILOG_CORE | xfs_ilog_fext(whichfork); } else { rval = XFS_ILOG_CORE; if ((error = xfs_bmbt_lookup_eq(cur, @@ -2482,7 +2482,7 @@ xfs_bmap_adjacent( * try to use it's last block as our starting point. */ if (ap->eof && ap->prevp->br_startoff != NULLFILEOFF && - !ISNULLSTARTBLOCK(ap->prevp->br_startblock) && + !isnullstartblock(ap->prevp->br_startblock) && ISVALID(ap->prevp->br_startblock + ap->prevp->br_blockcount, ap->prevp->br_startblock)) { ap->rval = ap->prevp->br_startblock + ap->prevp->br_blockcount; @@ -2511,7 +2511,7 @@ xfs_bmap_adjacent( * start block based on it. */ if (ap->prevp->br_startoff != NULLFILEOFF && - !ISNULLSTARTBLOCK(ap->prevp->br_startblock) && + !isnullstartblock(ap->prevp->br_startblock) && (prevbno = ap->prevp->br_startblock + ap->prevp->br_blockcount) && ISVALID(prevbno, ap->prevp->br_startblock)) { @@ -2552,7 +2552,7 @@ xfs_bmap_adjacent( * If there's a following (right) block, select a requested * start block based on it. */ - if (!ISNULLSTARTBLOCK(ap->gotp->br_startblock)) { + if (!isnullstartblock(ap->gotp->br_startblock)) { /* * Calculate gap to start of next block. */ @@ -3082,7 +3082,7 @@ xfs_bmap_btree_to_extents( ASSERT(ifp->if_broot == NULL); ASSERT((ifp->if_flags & XFS_IFBROOT) == 0); XFS_IFORK_FMT_SET(ip, whichfork, XFS_DINODE_FMT_EXTENTS); - *logflagsp = XFS_ILOG_CORE | XFS_ILOG_FEXT(whichfork); + *logflagsp = XFS_ILOG_CORE | xfs_ilog_fext(whichfork); return 0; } @@ -3136,8 +3136,8 @@ xfs_bmap_del_extent( del_endoff = del->br_startoff + del->br_blockcount; got_endoff = got.br_startoff + got.br_blockcount; ASSERT(got_endoff >= del_endoff); - delay = ISNULLSTARTBLOCK(got.br_startblock); - ASSERT(ISNULLSTARTBLOCK(del->br_startblock) == delay); + delay = isnullstartblock(got.br_startblock); + ASSERT(isnullstartblock(del->br_startblock) == delay); flags = 0; qfield = 0; error = 0; @@ -3189,7 +3189,7 @@ xfs_bmap_del_extent( } da_old = da_new = 0; } else { - da_old = STARTBLOCKVAL(got.br_startblock); + da_old = startblockval(got.br_startblock); da_new = 0; nblks = 0; do_fx = 0; @@ -3213,7 +3213,7 @@ xfs_bmap_del_extent( XFS_IFORK_NEXTENTS(ip, whichfork) - 1); flags |= XFS_ILOG_CORE; if (!cur) { - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); break; } if ((error = xfs_btree_delete(cur, &i))) @@ -3233,7 +3233,7 @@ xfs_bmap_del_extent( if (delay) { temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), da_old); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("2", ip, idx, whichfork); da_new = temp; @@ -3242,7 +3242,7 @@ xfs_bmap_del_extent( xfs_bmbt_set_startblock(ep, del_endblock); XFS_BMAP_TRACE_POST_UPDATE("2", ip, idx, whichfork); if (!cur) { - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); break; } if ((error = xfs_bmbt_update(cur, del_endoff, del_endblock, @@ -3262,7 +3262,7 @@ xfs_bmap_del_extent( if (delay) { temp = XFS_FILBLKS_MIN(xfs_bmap_worst_indlen(ip, temp), da_old); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); XFS_BMAP_TRACE_POST_UPDATE("1", ip, idx, whichfork); da_new = temp; @@ -3270,7 +3270,7 @@ xfs_bmap_del_extent( } XFS_BMAP_TRACE_POST_UPDATE("1", ip, idx, whichfork); if (!cur) { - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); break; } if ((error = xfs_bmbt_update(cur, got.br_startoff, @@ -3345,22 +3345,22 @@ xfs_bmap_del_extent( } XFS_WANT_CORRUPTED_GOTO(i == 1, done); } else - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); XFS_IFORK_NEXT_SET(ip, whichfork, XFS_IFORK_NEXTENTS(ip, whichfork) + 1); } else { ASSERT(whichfork == XFS_DATA_FORK); temp = xfs_bmap_worst_indlen(ip, temp); - xfs_bmbt_set_startblock(ep, NULLSTARTBLOCK((int)temp)); + xfs_bmbt_set_startblock(ep, nullstartblock((int)temp)); temp2 = xfs_bmap_worst_indlen(ip, temp2); - new.br_startblock = NULLSTARTBLOCK((int)temp2); + new.br_startblock = nullstartblock((int)temp2); da_new = temp + temp2; while (da_new > da_old) { if (temp) { temp--; da_new--; xfs_bmbt_set_startblock(ep, - NULLSTARTBLOCK((int)temp)); + nullstartblock((int)temp)); } if (da_new == da_old) break; @@ -3368,7 +3368,7 @@ xfs_bmap_del_extent( temp2--; da_new--; new.br_startblock = - NULLSTARTBLOCK((int)temp2); + nullstartblock((int)temp2); } } } @@ -3545,7 +3545,7 @@ xfs_bmap_extents_to_btree( nextents = ifp->if_bytes / (uint)sizeof(xfs_bmbt_rec_t); for (cnt = i = 0; i < nextents; i++) { ep = xfs_iext_get_ext(ifp, i); - if (!ISNULLSTARTBLOCK(xfs_bmbt_get_startblock(ep))) { + if (!isnullstartblock(xfs_bmbt_get_startblock(ep))) { arp->l0 = cpu_to_be64(ep->l0); arp->l1 = cpu_to_be64(ep->l1); arp++; cnt++; @@ -3572,7 +3572,7 @@ xfs_bmap_extents_to_btree( xfs_btree_log_recs(cur, abp, 1, be16_to_cpu(ablock->bb_numrecs)); ASSERT(*curp == NULL); *curp = cur; - *logflagsp = XFS_ILOG_CORE | XFS_ILOG_FBROOT(whichfork); + *logflagsp = XFS_ILOG_CORE | xfs_ilog_fbroot(whichfork); return 0; } @@ -3676,7 +3676,7 @@ xfs_bmap_local_to_extents( ip->i_d.di_nblocks = 1; XFS_TRANS_MOD_DQUOT_BYINO(args.mp, tp, ip, XFS_TRANS_DQ_BCOUNT, 1L); - flags |= XFS_ILOG_FEXT(whichfork); + flags |= xfs_ilog_fext(whichfork); } else { ASSERT(XFS_IFORK_NEXTENTS(ip, whichfork) == 0); xfs_bmap_forkoff_reset(ip->i_mount, ip, whichfork); @@ -4082,7 +4082,7 @@ xfs_bmap_add_attrfork( XFS_IFORK_ASIZE(ip) / (uint)sizeof(xfs_bmbt_rec_t); ip->i_afp->if_flags = XFS_IFEXTENTS; logflags = 0; - XFS_BMAP_INIT(&flist, &firstblock); + xfs_bmap_init(&flist, &firstblock); switch (ip->i_d.di_format) { case XFS_DINODE_FMT_LOCAL: error = xfs_bmap_add_attrfork_local(tp, ip, &firstblock, &flist, @@ -4162,7 +4162,7 @@ xfs_bmap_add_free( ASSERT(bno != NULLFSBLOCK); ASSERT(len > 0); ASSERT(len <= MAXEXTLEN); - ASSERT(!ISNULLSTARTBLOCK(bno)); + ASSERT(!isnullstartblock(bno)); agno = XFS_FSB_TO_AGNO(mp, bno); agbno = XFS_FSB_TO_AGBNO(mp, bno); ASSERT(agno < mp->m_sb.sb_agcount); @@ -4909,7 +4909,7 @@ xfs_bmapi( got.br_startoff = end; inhole = eof || got.br_startoff > bno; wasdelay = wr && !inhole && !(flags & XFS_BMAPI_DELAY) && - ISNULLSTARTBLOCK(got.br_startblock); + isnullstartblock(got.br_startblock); /* * First, deal with the hole before the allocated space * that we found, if any. @@ -5028,7 +5028,7 @@ xfs_bmapi( } ip->i_delayed_blks += alen; - abno = NULLSTARTBLOCK(indlen); + abno = nullstartblock(indlen); } else { /* * If first time, allocate and fill in @@ -5144,8 +5144,8 @@ xfs_bmapi( aoff + alen); #ifdef DEBUG if (flags & XFS_BMAPI_DELAY) { - ASSERT(ISNULLSTARTBLOCK(got.br_startblock)); - ASSERT(STARTBLOCKVAL(got.br_startblock) > 0); + ASSERT(isnullstartblock(got.br_startblock)); + ASSERT(startblockval(got.br_startblock) > 0); } ASSERT(got.br_state == XFS_EXT_NORM || got.br_state == XFS_EXT_UNWRITTEN); @@ -5179,7 +5179,7 @@ xfs_bmapi( ASSERT((bno >= obno) || (n == 0)); ASSERT(bno < end); mval->br_startoff = bno; - if (ISNULLSTARTBLOCK(got.br_startblock)) { + if (isnullstartblock(got.br_startblock)) { ASSERT(!wr || (flags & XFS_BMAPI_DELAY)); mval->br_startblock = DELAYSTARTBLOCK; } else @@ -5201,7 +5201,7 @@ xfs_bmapi( ASSERT(mval->br_blockcount <= len); } else { *mval = got; - if (ISNULLSTARTBLOCK(mval->br_startblock)) { + if (isnullstartblock(mval->br_startblock)) { ASSERT(!wr || (flags & XFS_BMAPI_DELAY)); mval->br_startblock = DELAYSTARTBLOCK; } @@ -5329,12 +5329,12 @@ error0: * Log everything. Do this after conversion, there's no point in * logging the extent records if we've converted to btree format. */ - if ((logflags & XFS_ILOG_FEXT(whichfork)) && + if ((logflags & xfs_ilog_fext(whichfork)) && XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS) - logflags &= ~XFS_ILOG_FEXT(whichfork); - else if ((logflags & XFS_ILOG_FBROOT(whichfork)) && + logflags &= ~xfs_ilog_fext(whichfork); + else if ((logflags & xfs_ilog_fbroot(whichfork)) && XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE) - logflags &= ~XFS_ILOG_FBROOT(whichfork); + logflags &= ~xfs_ilog_fbroot(whichfork); /* * Log whatever the flags say, even if error. Otherwise we might miss * detecting a case where the data is changed, there's an error, @@ -5411,7 +5411,7 @@ xfs_bmapi_single( *fsb = NULLFSBLOCK; return 0; } - ASSERT(!ISNULLSTARTBLOCK(got.br_startblock)); + ASSERT(!isnullstartblock(got.br_startblock)); ASSERT(bno < got.br_startoff + got.br_blockcount); *fsb = got.br_startblock + (bno - got.br_startoff); ifp->if_lastex = lastx; @@ -5543,7 +5543,7 @@ xfs_bunmapi( */ ASSERT(ep != NULL); del = got; - wasdel = ISNULLSTARTBLOCK(del.br_startblock); + wasdel = isnullstartblock(del.br_startblock); if (got.br_startoff < start) { del.br_startoff = start; del.br_blockcount -= start - got.br_startoff; @@ -5638,7 +5638,7 @@ xfs_bunmapi( xfs_bmbt_get_all(xfs_iext_get_ext(ifp, lastx - 1), &prev); ASSERT(prev.br_state == XFS_EXT_NORM); - ASSERT(!ISNULLSTARTBLOCK(prev.br_startblock)); + ASSERT(!isnullstartblock(prev.br_startblock)); ASSERT(del.br_startblock == prev.br_startblock + prev.br_blockcount); if (prev.br_startoff < start) { @@ -5666,7 +5666,7 @@ xfs_bunmapi( } } if (wasdel) { - ASSERT(STARTBLOCKVAL(del.br_startblock) > 0); + ASSERT(startblockval(del.br_startblock) > 0); /* Update realtime/data freespace, unreserve quota */ if (isrt) { xfs_filblks_t rtexts; @@ -5782,12 +5782,12 @@ error0: * Log everything. Do this after conversion, there's no point in * logging the extent records if we've converted to btree format. */ - if ((logflags & XFS_ILOG_FEXT(whichfork)) && + if ((logflags & xfs_ilog_fext(whichfork)) && XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_EXTENTS) - logflags &= ~XFS_ILOG_FEXT(whichfork); - else if ((logflags & XFS_ILOG_FBROOT(whichfork)) && + logflags &= ~xfs_ilog_fext(whichfork); + else if ((logflags & xfs_ilog_fbroot(whichfork)) && XFS_IFORK_FORMAT(ip, whichfork) != XFS_DINODE_FMT_BTREE) - logflags &= ~XFS_ILOG_FBROOT(whichfork); + logflags &= ~xfs_ilog_fbroot(whichfork); /* * Log inode even in the error case, if the transaction * is dirty we'll need to shut down the filesystem. @@ -5838,7 +5838,7 @@ xfs_getbmapx_fix_eof_hole( if (startblock == DELAYSTARTBLOCK) out->bmv_block = -2; else - out->bmv_block = XFS_FSB_TO_DB(ip, startblock); + out->bmv_block = xfs_fsb_to_db(ip, startblock); fileblock = XFS_BB_TO_FSB(ip->i_mount, out->bmv_offset); ifp = XFS_IFORK_PTR(ip, XFS_DATA_FORK); if (xfs_iext_bno_to_ext(ifp, fileblock, &lastx) && @@ -5979,7 +5979,7 @@ xfs_getbmap( if (nex > XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1) nex = XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1; - bmapi_flags = XFS_BMAPI_AFLAG(whichfork) | + bmapi_flags = xfs_bmapi_aflag(whichfork) | ((iflags & BMV_IF_PREALLOC) ? 0 : XFS_BMAPI_IGSTATE); /* @@ -6098,7 +6098,7 @@ xfs_bmap_isaeof( */ *aeof = (off >= s.br_startoff && off < s.br_startoff + s.br_blockcount && - ISNULLSTARTBLOCK(s.br_startblock)) || + isnullstartblock(s.br_startblock)) || off >= s.br_startoff + s.br_blockcount; return 0; } diff --git a/fs/xfs/xfs_bmap.h b/fs/xfs/xfs_bmap.h index 284571c05ed..be2979d88d3 100644 --- a/fs/xfs/xfs_bmap.h +++ b/fs/xfs/xfs_bmap.h @@ -95,7 +95,6 @@ typedef struct xfs_bmap_free /* need write cache flushing and no */ /* additional allocation alignments */ -#define XFS_BMAPI_AFLAG(w) xfs_bmapi_aflag(w) static inline int xfs_bmapi_aflag(int w) { return (w == XFS_ATTR_FORK ? XFS_BMAPI_ATTRFORK : 0); @@ -107,7 +106,6 @@ static inline int xfs_bmapi_aflag(int w) #define DELAYSTARTBLOCK ((xfs_fsblock_t)-1LL) #define HOLESTARTBLOCK ((xfs_fsblock_t)-2LL) -#define XFS_BMAP_INIT(flp,fbp) xfs_bmap_init(flp,fbp) static inline void xfs_bmap_init(xfs_bmap_free_t *flp, xfs_fsblock_t *fbp) { ((flp)->xbf_first = NULL, (flp)->xbf_count = 0, \ diff --git a/fs/xfs/xfs_bmap_btree.c b/fs/xfs/xfs_bmap_btree.c index ba6b08c2fb0..0760d352586 100644 --- a/fs/xfs/xfs_bmap_btree.c +++ b/fs/xfs/xfs_bmap_btree.c @@ -121,7 +121,7 @@ __xfs_bmbt_get_all( b = (((xfs_dfsbno_t)l0 & xfs_mask64lo(9)) << 43) | (((xfs_dfsbno_t)l1) >> 21); - ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b)); + ASSERT((b >> 32) == 0 || isnulldstartblock(b)); s->br_startblock = (xfs_fsblock_t)b; } #else /* !DEBUG */ @@ -172,7 +172,7 @@ xfs_bmbt_get_startblock( b = (((xfs_dfsbno_t)r->l0 & xfs_mask64lo(9)) << 43) | (((xfs_dfsbno_t)r->l1) >> 21); - ASSERT((b >> 32) == 0 || ISNULLDSTARTBLOCK(b)); + ASSERT((b >> 32) == 0 || isnulldstartblock(b)); return (xfs_fsblock_t)b; #else /* !DEBUG */ return (xfs_fsblock_t)(((xfs_dfsbno_t)r->l1) >> 21); @@ -261,7 +261,7 @@ xfs_bmbt_set_allf( ((xfs_bmbt_rec_base_t)blockcount & (xfs_bmbt_rec_base_t)xfs_mask64lo(21)); #else /* !XFS_BIG_BLKNOS */ - if (ISNULLSTARTBLOCK(startblock)) { + if (isnullstartblock(startblock)) { r->l0 = ((xfs_bmbt_rec_base_t)extent_flag << 63) | ((xfs_bmbt_rec_base_t)startoff << 9) | (xfs_bmbt_rec_base_t)xfs_mask64lo(9); @@ -321,7 +321,7 @@ xfs_bmbt_disk_set_allf( ((xfs_bmbt_rec_base_t)blockcount & (xfs_bmbt_rec_base_t)xfs_mask64lo(21))); #else /* !XFS_BIG_BLKNOS */ - if (ISNULLSTARTBLOCK(startblock)) { + if (isnullstartblock(startblock)) { r->l0 = cpu_to_be64( ((xfs_bmbt_rec_base_t)extent_flag << 63) | ((xfs_bmbt_rec_base_t)startoff << 9) | @@ -382,7 +382,7 @@ xfs_bmbt_set_startblock( r->l1 = (r->l1 & (xfs_bmbt_rec_base_t)xfs_mask64lo(21)) | (xfs_bmbt_rec_base_t)(v << 21); #else /* !XFS_BIG_BLKNOS */ - if (ISNULLSTARTBLOCK(v)) { + if (isnullstartblock(v)) { r->l0 |= (xfs_bmbt_rec_base_t)xfs_mask64lo(9); r->l1 = (xfs_bmbt_rec_base_t)xfs_mask64hi(11) | ((xfs_bmbt_rec_base_t)v << 21) | diff --git a/fs/xfs/xfs_bmap_btree.h b/fs/xfs/xfs_bmap_btree.h index a4555abb662..0e8df007615 100644 --- a/fs/xfs/xfs_bmap_btree.h +++ b/fs/xfs/xfs_bmap_btree.h @@ -76,26 +76,22 @@ typedef struct xfs_bmbt_rec_host { #define DSTARTBLOCKMASK \ (((((xfs_dfsbno_t)1) << DSTARTBLOCKMASKBITS) - 1) << STARTBLOCKVALBITS) -#define ISNULLSTARTBLOCK(x) isnullstartblock(x) static inline int isnullstartblock(xfs_fsblock_t x) { return ((x) & STARTBLOCKMASK) == STARTBLOCKMASK; } -#define ISNULLDSTARTBLOCK(x) isnulldstartblock(x) static inline int isnulldstartblock(xfs_dfsbno_t x) { return ((x) & DSTARTBLOCKMASK) == DSTARTBLOCKMASK; } -#define NULLSTARTBLOCK(k) nullstartblock(k) static inline xfs_fsblock_t nullstartblock(int k) { ASSERT(k < (1 << STARTBLOCKVALBITS)); return STARTBLOCKMASK | (k); } -#define STARTBLOCKVAL(x) startblockval(x) static inline xfs_filblks_t startblockval(xfs_fsblock_t x) { return (xfs_filblks_t)((x) & ~STARTBLOCKMASK); diff --git a/fs/xfs/xfs_btree.c b/fs/xfs/xfs_btree.c index 2c3ef20f884..e73c332eb23 100644 --- a/fs/xfs/xfs_btree.c +++ b/fs/xfs/xfs_btree.c @@ -843,7 +843,7 @@ xfs_btree_ptr_is_null( union xfs_btree_ptr *ptr) { if (cur->bc_flags & XFS_BTREE_LONG_PTRS) - return be64_to_cpu(ptr->l) == NULLFSBLOCK; + return be64_to_cpu(ptr->l) == NULLDFSBNO; else return be32_to_cpu(ptr->s) == NULLAGBLOCK; } @@ -854,7 +854,7 @@ xfs_btree_set_ptr_null( union xfs_btree_ptr *ptr) { if (cur->bc_flags & XFS_BTREE_LONG_PTRS) - ptr->l = cpu_to_be64(NULLFSBLOCK); + ptr->l = cpu_to_be64(NULLDFSBNO); else ptr->s = cpu_to_be32(NULLAGBLOCK); } @@ -918,8 +918,8 @@ xfs_btree_init_block( new->bb_numrecs = cpu_to_be16(numrecs); if (cur->bc_flags & XFS_BTREE_LONG_PTRS) { - new->bb_u.l.bb_leftsib = cpu_to_be64(NULLFSBLOCK); - new->bb_u.l.bb_rightsib = cpu_to_be64(NULLFSBLOCK); + new->bb_u.l.bb_leftsib = cpu_to_be64(NULLDFSBNO); + new->bb_u.l.bb_rightsib = cpu_to_be64(NULLDFSBNO); } else { new->bb_u.s.bb_leftsib = cpu_to_be32(NULLAGBLOCK); new->bb_u.s.bb_rightsib = cpu_to_be32(NULLAGBLOCK); @@ -960,7 +960,7 @@ xfs_btree_buf_to_ptr( ptr->l = cpu_to_be64(XFS_DADDR_TO_FSB(cur->bc_mp, XFS_BUF_ADDR(bp))); else { - ptr->s = cpu_to_be32(XFS_DADDR_TO_AGBNO(cur->bc_mp, + ptr->s = cpu_to_be32(xfs_daddr_to_agbno(cur->bc_mp, XFS_BUF_ADDR(bp))); } } @@ -971,7 +971,7 @@ xfs_btree_ptr_to_daddr( union xfs_btree_ptr *ptr) { if (cur->bc_flags & XFS_BTREE_LONG_PTRS) { - ASSERT(be64_to_cpu(ptr->l) != NULLFSBLOCK); + ASSERT(be64_to_cpu(ptr->l) != NULLDFSBNO); return XFS_FSB_TO_DADDR(cur->bc_mp, be64_to_cpu(ptr->l)); } else { @@ -2454,7 +2454,7 @@ xfs_btree_new_iroot( xfs_btree_log_ptrs(cur, cbp, 1, be16_to_cpu(cblock->bb_numrecs)); *logflags |= - XFS_ILOG_CORE | XFS_ILOG_FBROOT(cur->bc_private.b.whichfork); + XFS_ILOG_CORE | xfs_ilog_fbroot(cur->bc_private.b.whichfork); *stat = 1; XFS_BTREE_TRACE_CURSOR(cur, XBT_EXIT); return 0; @@ -3048,7 +3048,7 @@ xfs_btree_kill_iroot( cur->bc_bufs[level - 1] = NULL; be16_add_cpu(&block->bb_level, -1); xfs_trans_log_inode(cur->bc_tp, ip, - XFS_ILOG_CORE | XFS_ILOG_FBROOT(cur->bc_private.b.whichfork)); + XFS_ILOG_CORE | xfs_ilog_fbroot(cur->bc_private.b.whichfork)); cur->bc_nlevels--; out0: XFS_BTREE_TRACE_CURSOR(cur, XBT_EXIT); diff --git a/fs/xfs/xfs_da_btree.c b/fs/xfs/xfs_da_btree.c index a11a8390bf6..c45f74ff1a5 100644 --- a/fs/xfs/xfs_da_btree.c +++ b/fs/xfs/xfs_da_btree.c @@ -1597,7 +1597,7 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno) nmap = 1; ASSERT(args->firstblock != NULL); if ((error = xfs_bmapi(tp, dp, bno, count, - XFS_BMAPI_AFLAG(w)|XFS_BMAPI_WRITE|XFS_BMAPI_METADATA| + xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE|XFS_BMAPI_METADATA| XFS_BMAPI_CONTIG, args->firstblock, args->total, &map, &nmap, args->flist, NULL))) { @@ -1618,7 +1618,7 @@ xfs_da_grow_inode(xfs_da_args_t *args, xfs_dablk_t *new_blkno) nmap = MIN(XFS_BMAP_MAX_NMAP, count); c = (int)(bno + count - b); if ((error = xfs_bmapi(tp, dp, b, c, - XFS_BMAPI_AFLAG(w)|XFS_BMAPI_WRITE| + xfs_bmapi_aflag(w)|XFS_BMAPI_WRITE| XFS_BMAPI_METADATA, args->firstblock, args->total, &mapp[mapi], &nmap, args->flist, @@ -1882,7 +1882,7 @@ xfs_da_shrink_inode(xfs_da_args_t *args, xfs_dablk_t dead_blkno, * the last block to the place we want to kill. */ if ((error = xfs_bunmapi(tp, dp, dead_blkno, count, - XFS_BMAPI_AFLAG(w)|XFS_BMAPI_METADATA, + xfs_bmapi_aflag(w)|XFS_BMAPI_METADATA, 0, args->firstblock, args->flist, NULL, &done)) == ENOSPC) { if (w != XFS_DATA_FORK) @@ -1987,7 +1987,7 @@ xfs_da_do_buf( if ((error = xfs_bmapi(trans, dp, (xfs_fileoff_t)bno, nfsb, XFS_BMAPI_METADATA | - XFS_BMAPI_AFLAG(whichfork), + xfs_bmapi_aflag(whichfork), NULL, 0, mapp, &nmap, NULL, NULL))) goto exit0; } diff --git a/fs/xfs/xfs_ialloc.c b/fs/xfs/xfs_ialloc.c index e6ebbaeb4dc..ab016e5ae7b 100644 --- a/fs/xfs/xfs_ialloc.c +++ b/fs/xfs/xfs_ialloc.c @@ -357,7 +357,7 @@ xfs_ialloc_ag_alloc( int ioffset = i << args.mp->m_sb.sb_inodelog; uint isize = sizeof(struct xfs_dinode); - free = XFS_MAKE_IPTR(args.mp, fbuf, i); + free = xfs_make_iptr(args.mp, fbuf, i); free->di_magic = cpu_to_be16(XFS_DINODE_MAGIC); free->di_version = version; free->di_gen = cpu_to_be32(gen); @@ -937,7 +937,7 @@ nextag: } } } - offset = XFS_IALLOC_FIND_FREE(&rec.ir_free); + offset = xfs_ialloc_find_free(&rec.ir_free); ASSERT(offset >= 0); ASSERT(offset < XFS_INODES_PER_CHUNK); ASSERT((XFS_AGINO_TO_OFFSET(mp, rec.ir_startino) % @@ -1279,7 +1279,7 @@ xfs_imap( offset = XFS_INO_TO_OFFSET(mp, ino); ASSERT(offset < mp->m_sb.sb_inopblock); - cluster_agbno = XFS_DADDR_TO_AGBNO(mp, imap->im_blkno); + cluster_agbno = xfs_daddr_to_agbno(mp, imap->im_blkno); offset += (agbno - cluster_agbno) * mp->m_sb.sb_inopblock; imap->im_len = XFS_FSB_TO_BB(mp, blks_per_cluster); diff --git a/fs/xfs/xfs_ialloc.h b/fs/xfs/xfs_ialloc.h index 50f558a4e0a..aeee8278f92 100644 --- a/fs/xfs/xfs_ialloc.h +++ b/fs/xfs/xfs_ialloc.h @@ -39,7 +39,6 @@ struct xfs_trans; /* * Make an inode pointer out of the buffer/offset. */ -#define XFS_MAKE_IPTR(mp,b,o) xfs_make_iptr(mp,b,o) static inline struct xfs_dinode * xfs_make_iptr(struct xfs_mount *mp, struct xfs_buf *b, int o) { @@ -50,7 +49,6 @@ xfs_make_iptr(struct xfs_mount *mp, struct xfs_buf *b, int o) /* * Find a free (set) bit in the inode bitmask. */ -#define XFS_IALLOC_FIND_FREE(fp) xfs_ialloc_find_free(fp) static inline int xfs_ialloc_find_free(xfs_inofree_t *fp) { return xfs_lowbit64(*fp); diff --git a/fs/xfs/xfs_ialloc_btree.h b/fs/xfs/xfs_ialloc_btree.h index 37e5dd01a57..5580e255ff0 100644 --- a/fs/xfs/xfs_ialloc_btree.h +++ b/fs/xfs/xfs_ialloc_btree.h @@ -36,7 +36,6 @@ typedef __uint64_t xfs_inofree_t; #define XFS_INODES_PER_CHUNK_LOG (XFS_NBBYLOG + 3) #define XFS_INOBT_ALL_FREE ((xfs_inofree_t)-1) -#define XFS_INOBT_MASKN(i,n) xfs_inobt_maskn(i,n) static inline xfs_inofree_t xfs_inobt_maskn(int i, int n) { return (((n) >= XFS_INODES_PER_CHUNK ? \ diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c index 5a5e035e5d3..e7ae08d1df4 100644 --- a/fs/xfs/xfs_inode.c +++ b/fs/xfs/xfs_inode.c @@ -424,6 +424,19 @@ xfs_iformat( case XFS_DINODE_FMT_LOCAL: atp = (xfs_attr_shortform_t *)XFS_DFORK_APTR(dip); size = be16_to_cpu(atp->hdr.totsize); + + if (unlikely(size < sizeof(struct xfs_attr_sf_hdr))) { + xfs_fs_repair_cmn_err(CE_WARN, ip->i_mount, + "corrupt inode %Lu " + "(bad attr fork size %Ld).", + (unsigned long long) ip->i_ino, + (long long) size); + XFS_CORRUPTION_ERROR("xfs_iformat(8)", + XFS_ERRLEVEL_LOW, + ip->i_mount, dip); + return XFS_ERROR(EFSCORRUPTED); + } + error = xfs_iformat_local(ip, dip, XFS_ATTR_FORK, size); break; case XFS_DINODE_FMT_EXTENTS: @@ -1601,10 +1614,10 @@ xfs_itruncate_finish( * in this file with garbage in them once recovery * runs. */ - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_bunmapi(ntp, ip, first_unmap_block, unmap_len, - XFS_BMAPI_AFLAG(fork) | + xfs_bmapi_aflag(fork) | (sync ? 0 : XFS_BMAPI_ASYNC), XFS_ITRUNC_MAX_EXTENTS, &first_block, &free_list, @@ -2557,7 +2570,7 @@ xfs_iextents_copy( for (i = 0; i < nrecs; i++) { xfs_bmbt_rec_host_t *ep = xfs_iext_get_ext(ifp, i); start_block = xfs_bmbt_get_startblock(ep); - if (ISNULLSTARTBLOCK(start_block)) { + if (isnullstartblock(start_block)) { /* * It's a delayed allocation extent, so skip it. */ diff --git a/fs/xfs/xfs_inode_item.h b/fs/xfs/xfs_inode_item.h index 1ff04cc323a..9957d0602d5 100644 --- a/fs/xfs/xfs_inode_item.h +++ b/fs/xfs/xfs_inode_item.h @@ -111,20 +111,16 @@ typedef struct xfs_inode_log_format_64 { #define XFS_ILI_IOLOCKED_ANY (XFS_ILI_IOLOCKED_EXCL | XFS_ILI_IOLOCKED_SHARED) - -#define XFS_ILOG_FBROOT(w) xfs_ilog_fbroot(w) static inline int xfs_ilog_fbroot(int w) { return (w == XFS_DATA_FORK ? XFS_ILOG_DBROOT : XFS_ILOG_ABROOT); } -#define XFS_ILOG_FEXT(w) xfs_ilog_fext(w) static inline int xfs_ilog_fext(int w) { return (w == XFS_DATA_FORK ? XFS_ILOG_DEXT : XFS_ILOG_AEXT); } -#define XFS_ILOG_FDATA(w) xfs_ilog_fdata(w) static inline int xfs_ilog_fdata(int w) { return (w == XFS_DATA_FORK ? XFS_ILOG_DDATA : XFS_ILOG_ADATA); diff --git a/fs/xfs/xfs_iomap.c b/fs/xfs/xfs_iomap.c index 911062cf73a..08ce72316bf 100644 --- a/fs/xfs/xfs_iomap.c +++ b/fs/xfs/xfs_iomap.c @@ -155,7 +155,7 @@ xfs_imap_to_bmap( iomapp->iomap_bn = IOMAP_DADDR_NULL; iomapp->iomap_flags |= IOMAP_DELAY; } else { - iomapp->iomap_bn = XFS_FSB_TO_DB(ip, start_block); + iomapp->iomap_bn = xfs_fsb_to_db(ip, start_block); if (ISUNWRITTEN(imap)) iomapp->iomap_flags |= IOMAP_UNWRITTEN; } @@ -261,7 +261,7 @@ xfs_iomap( xfs_iunlock(ip, lockmode); lockmode = 0; - if (nimaps && !ISNULLSTARTBLOCK(imap.br_startblock)) { + if (nimaps && !isnullstartblock(imap.br_startblock)) { xfs_iomap_map_trace(XFS_IOMAP_WRITE_MAP, ip, offset, count, iomapp, &imap, flags); break; @@ -491,7 +491,7 @@ xfs_iomap_write_direct( /* * Issue the xfs_bmapi() call to allocate the blocks */ - XFS_BMAP_INIT(&free_list, &firstfsb); + xfs_bmap_init(&free_list, &firstfsb); nimaps = 1; error = xfs_bmapi(tp, ip, offset_fsb, count_fsb, bmapi_flag, &firstfsb, 0, &imap, &nimaps, &free_list, NULL); @@ -751,7 +751,7 @@ xfs_iomap_write_allocate( xfs_trans_ijoin(tp, ip, XFS_ILOCK_EXCL); xfs_trans_ihold(tp, ip); - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); /* * it is possible that the extents have changed since @@ -911,7 +911,7 @@ xfs_iomap_write_unwritten( /* * Modify the unwritten extent state of the buffer. */ - XFS_BMAP_INIT(&free_list, &firstfsb); + xfs_bmap_init(&free_list, &firstfsb); nimaps = 1; error = xfs_bmapi(tp, ip, offset_fsb, count_fsb, XFS_BMAPI_WRITE|XFS_BMAPI_CONVERT, &firstfsb, diff --git a/fs/xfs/xfs_itable.c b/fs/xfs/xfs_itable.c index e19d0a8d561..cf98a805ec9 100644 --- a/fs/xfs/xfs_itable.c +++ b/fs/xfs/xfs_itable.c @@ -453,7 +453,7 @@ xfs_bulkstat( (chunkidx = agino - gino + 1) < XFS_INODES_PER_CHUNK && /* there are some left allocated */ - XFS_INOBT_MASKN(chunkidx, + xfs_inobt_maskn(chunkidx, XFS_INODES_PER_CHUNK - chunkidx) & ~gfree) { /* * Grab the chunk record. Mark all the @@ -464,7 +464,7 @@ xfs_bulkstat( if (XFS_INOBT_MASK(i) & ~gfree) gcnt++; } - gfree |= XFS_INOBT_MASKN(0, chunkidx); + gfree |= xfs_inobt_maskn(0, chunkidx); irbp->ir_startino = gino; irbp->ir_freecount = gcnt; irbp->ir_free = gfree; @@ -535,7 +535,7 @@ xfs_bulkstat( chunkidx < XFS_INODES_PER_CHUNK; chunkidx += nicluster, agbno += nbcluster) { - if (XFS_INOBT_MASKN(chunkidx, + if (xfs_inobt_maskn(chunkidx, nicluster) & ~gfree) xfs_btree_reada_bufs(mp, agno, agbno, nbcluster); diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c index 3c97c6463a4..35300250e86 100644 --- a/fs/xfs/xfs_mount.c +++ b/fs/xfs/xfs_mount.c @@ -45,7 +45,6 @@ #include "xfs_fsops.h" #include "xfs_utils.h" -STATIC int xfs_mount_log_sb(xfs_mount_t *, __int64_t); STATIC int xfs_uuid_mount(xfs_mount_t *); STATIC void xfs_unmountfs_wait(xfs_mount_t *); @@ -682,7 +681,7 @@ xfs_initialize_perag_data(xfs_mount_t *mp, xfs_agnumber_t agcount) * Update alignment values based on mount options and sb values */ STATIC int -xfs_update_alignment(xfs_mount_t *mp, __uint64_t *update_flags) +xfs_update_alignment(xfs_mount_t *mp) { xfs_sb_t *sbp = &(mp->m_sb); @@ -736,11 +735,11 @@ xfs_update_alignment(xfs_mount_t *mp, __uint64_t *update_flags) if (xfs_sb_version_hasdalign(sbp)) { if (sbp->sb_unit != mp->m_dalign) { sbp->sb_unit = mp->m_dalign; - *update_flags |= XFS_SB_UNIT; + mp->m_update_flags |= XFS_SB_UNIT; } if (sbp->sb_width != mp->m_swidth) { sbp->sb_width = mp->m_swidth; - *update_flags |= XFS_SB_WIDTH; + mp->m_update_flags |= XFS_SB_WIDTH; } } } else if ((mp->m_flags & XFS_MOUNT_NOALIGN) != XFS_MOUNT_NOALIGN && @@ -905,7 +904,6 @@ xfs_mountfs( xfs_sb_t *sbp = &(mp->m_sb); xfs_inode_t *rip; __uint64_t resblks; - __int64_t update_flags = 0LL; uint quotamount, quotaflags; int uuid_mounted = 0; int error = 0; @@ -933,7 +931,7 @@ xfs_mountfs( "XFS: correcting sb_features alignment problem"); sbp->sb_features2 |= sbp->sb_bad_features2; sbp->sb_bad_features2 = sbp->sb_features2; - update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2; + mp->m_update_flags |= XFS_SB_FEATURES2 | XFS_SB_BAD_FEATURES2; /* * Re-check for ATTR2 in case it was found in bad_features2 @@ -947,11 +945,11 @@ xfs_mountfs( if (xfs_sb_version_hasattr2(&mp->m_sb) && (mp->m_flags & XFS_MOUNT_NOATTR2)) { xfs_sb_version_removeattr2(&mp->m_sb); - update_flags |= XFS_SB_FEATURES2; + mp->m_update_flags |= XFS_SB_FEATURES2; /* update sb_versionnum for the clearing of the morebits */ if (!sbp->sb_features2) - update_flags |= XFS_SB_VERSIONNUM; + mp->m_update_flags |= XFS_SB_VERSIONNUM; } /* @@ -960,7 +958,7 @@ xfs_mountfs( * allocator alignment is within an ag, therefore ag has * to be aligned at stripe boundary. */ - error = xfs_update_alignment(mp, &update_flags); + error = xfs_update_alignment(mp); if (error) goto error1; @@ -1137,10 +1135,12 @@ xfs_mountfs( } /* - * If fs is not mounted readonly, then update the superblock changes. + * If this is a read-only mount defer the superblock updates until + * the next remount into writeable mode. Otherwise we would never + * perform the update e.g. for the root filesystem. */ - if (update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY)) { - error = xfs_mount_log_sb(mp, update_flags); + if (mp->m_update_flags && !(mp->m_flags & XFS_MOUNT_RDONLY)) { + error = xfs_mount_log_sb(mp, mp->m_update_flags); if (error) { cmn_err(CE_WARN, "XFS: failed to write sb changes"); goto error4; @@ -1820,7 +1820,7 @@ xfs_uuid_mount( * be altered by the mount options, as well as any potential sb_features2 * fixup. Only the first superblock is updated. */ -STATIC int +int xfs_mount_log_sb( xfs_mount_t *mp, __int64_t fields) diff --git a/fs/xfs/xfs_mount.h b/fs/xfs/xfs_mount.h index c1e02846732..f5e9937f9bd 100644 --- a/fs/xfs/xfs_mount.h +++ b/fs/xfs/xfs_mount.h @@ -44,9 +44,9 @@ typedef struct xfs_trans_reservations { #ifndef __KERNEL__ -#define XFS_DADDR_TO_AGNO(mp,d) \ +#define xfs_daddr_to_agno(mp,d) \ ((xfs_agnumber_t)(XFS_BB_TO_FSBT(mp, d) / (mp)->m_sb.sb_agblocks)) -#define XFS_DADDR_TO_AGBNO(mp,d) \ +#define xfs_daddr_to_agbno(mp,d) \ ((xfs_agblock_t)(XFS_BB_TO_FSBT(mp, d) % (mp)->m_sb.sb_agblocks)) #else /* __KERNEL__ */ @@ -327,6 +327,8 @@ typedef struct xfs_mount { spinlock_t m_sync_lock; /* work item list lock */ int m_sync_seq; /* sync thread generation no. */ wait_queue_head_t m_wait_single_sync_task; + __int64_t m_update_flags; /* sb flags we need to update + on the next remount,rw */ } xfs_mount_t; /* @@ -439,7 +441,6 @@ void xfs_do_force_shutdown(struct xfs_mount *mp, int flags, char *fname, */ #define XFS_MFSI_QUIET 0x40 /* Be silent if mount errors found */ -#define XFS_DADDR_TO_AGNO(mp,d) xfs_daddr_to_agno(mp,d) static inline xfs_agnumber_t xfs_daddr_to_agno(struct xfs_mount *mp, xfs_daddr_t d) { @@ -448,7 +449,6 @@ xfs_daddr_to_agno(struct xfs_mount *mp, xfs_daddr_t d) return (xfs_agnumber_t) ld; } -#define XFS_DADDR_TO_AGBNO(mp,d) xfs_daddr_to_agbno(mp,d) static inline xfs_agblock_t xfs_daddr_to_agbno(struct xfs_mount *mp, xfs_daddr_t d) { @@ -514,6 +514,7 @@ extern int xfs_mod_incore_sb_unlocked(xfs_mount_t *, xfs_sb_field_t, int64_t, int); extern int xfs_mod_incore_sb_batch(xfs_mount_t *, xfs_mod_sb_t *, uint, int); +extern int xfs_mount_log_sb(xfs_mount_t *, __int64_t); extern struct xfs_buf *xfs_getsb(xfs_mount_t *, int); extern int xfs_readsb(xfs_mount_t *, int); extern void xfs_freesb(xfs_mount_t *); diff --git a/fs/xfs/xfs_rename.c b/fs/xfs/xfs_rename.c index 86471bb40fd..58f85e9cd11 100644 --- a/fs/xfs/xfs_rename.c +++ b/fs/xfs/xfs_rename.c @@ -147,7 +147,7 @@ xfs_rename( xfs_sort_for_rename(src_dp, target_dp, src_ip, target_ip, inodes, &num_inodes); - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); tp = xfs_trans_alloc(mp, XFS_TRANS_RENAME); cancel_flags = XFS_TRANS_RELEASE_LOG_RES; spaceres = XFS_RENAME_SPACE_RES(mp, target_name->len); diff --git a/fs/xfs/xfs_rtalloc.c b/fs/xfs/xfs_rtalloc.c index edf12c7b834..c5bb86f3ec0 100644 --- a/fs/xfs/xfs_rtalloc.c +++ b/fs/xfs/xfs_rtalloc.c @@ -120,7 +120,7 @@ xfs_growfs_rt_alloc( if ((error = xfs_trans_iget(mp, tp, ino, 0, XFS_ILOCK_EXCL, &ip))) goto error_cancel; - XFS_BMAP_INIT(&flist, &firstblock); + xfs_bmap_init(&flist, &firstblock); /* * Allocate blocks to the bitmap file. */ diff --git a/fs/xfs/xfs_rw.h b/fs/xfs/xfs_rw.h index f87db5344ce..f76c003ec55 100644 --- a/fs/xfs/xfs_rw.h +++ b/fs/xfs/xfs_rw.h @@ -28,7 +28,6 @@ struct xfs_mount; * file is a real time file or not, because the bmap code * does. */ -#define XFS_FSB_TO_DB(ip,fsb) xfs_fsb_to_db(ip,fsb) static inline xfs_daddr_t xfs_fsb_to_db(struct xfs_inode *ip, xfs_fsblock_t fsb) { diff --git a/fs/xfs/xfs_sb.h b/fs/xfs/xfs_sb.h index 1ed71916e4c..1b017c65749 100644 --- a/fs/xfs/xfs_sb.h +++ b/fs/xfs/xfs_sb.h @@ -505,7 +505,7 @@ static inline void xfs_sb_version_removeattr2(xfs_sb_t *sbp) #define XFS_HDR_BLOCK(mp,d) ((xfs_agblock_t)XFS_BB_TO_FSBT(mp,d)) #define XFS_DADDR_TO_FSB(mp,d) XFS_AGB_TO_FSB(mp, \ - XFS_DADDR_TO_AGNO(mp,d), XFS_DADDR_TO_AGBNO(mp,d)) + xfs_daddr_to_agno(mp,d), xfs_daddr_to_agbno(mp,d)) #define XFS_FSB_TO_DADDR(mp,fsbno) XFS_AGB_TO_DADDR(mp, \ XFS_FSB_TO_AGNO(mp,fsbno), XFS_FSB_TO_AGBNO(mp,fsbno)) diff --git a/fs/xfs/xfs_vnodeops.c b/fs/xfs/xfs_vnodeops.c index f07bf8768c3..0e55c5d7db5 100644 --- a/fs/xfs/xfs_vnodeops.c +++ b/fs/xfs/xfs_vnodeops.c @@ -862,7 +862,7 @@ xfs_inactive_symlink_rmt( * Find the block(s) so we can inval and unmap them. */ done = 0; - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); nmaps = ARRAY_SIZE(mval); if ((error = xfs_bmapi(tp, ip, 0, XFS_B_TO_FSB(mp, size), XFS_BMAPI_METADATA, &first_block, 0, mval, &nmaps, @@ -1288,7 +1288,7 @@ xfs_inactive( /* * Free the inode. */ - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_ifree(tp, ip, &free_list); if (error) { /* @@ -1461,7 +1461,7 @@ xfs_create( xfs_ilock(dp, XFS_ILOCK_EXCL | XFS_ILOCK_PARENT); unlock_dp_on_error = B_TRUE; - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); ASSERT(ip == NULL); @@ -1879,7 +1879,7 @@ xfs_remove( } } - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_dir_removename(tp, dp, name, ip->i_ino, &first_block, &free_list, resblks); if (error) { @@ -2059,7 +2059,7 @@ xfs_link( if (error) goto error_return; - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_dir_createname(tp, tdp, target_name, sip->i_ino, &first_block, &free_list, resblks); @@ -2231,7 +2231,7 @@ xfs_mkdir( xfs_trans_ijoin(tp, dp, XFS_ILOCK_EXCL); unlock_dp_on_error = B_FALSE; - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); error = xfs_dir_createname(tp, dp, dir_name, cdp->i_ino, &first_block, &free_list, resblks ? @@ -2438,7 +2438,7 @@ xfs_symlink( * Initialize the bmap freelist prior to calling either * bmapi or the directory create code. */ - XFS_BMAP_INIT(&free_list, &first_block); + xfs_bmap_init(&free_list, &first_block); /* * Allocate an inode for the symlink. @@ -2860,7 +2860,7 @@ retry: /* * Issue the xfs_bmapi() call to allocate the blocks */ - XFS_BMAP_INIT(&free_list, &firstfsb); + xfs_bmap_init(&free_list, &firstfsb); error = xfs_bmapi(tp, ip, startoffset_fsb, allocatesize_fsb, bmapi_flag, &firstfsb, 0, imapp, &nimaps, @@ -2980,7 +2980,7 @@ xfs_zero_remaining_bytes( XFS_BUF_UNDONE(bp); XFS_BUF_UNWRITE(bp); XFS_BUF_READ(bp); - XFS_BUF_SET_ADDR(bp, XFS_FSB_TO_DB(ip, imap.br_startblock)); + XFS_BUF_SET_ADDR(bp, xfs_fsb_to_db(ip, imap.br_startblock)); xfsbdstrat(mp, bp); error = xfs_iowait(bp); if (error) { @@ -3186,7 +3186,7 @@ xfs_free_file_space( /* * issue the bunmapi() call to free the blocks */ - XFS_BMAP_INIT(&free_list, &firstfsb); + xfs_bmap_init(&free_list, &firstfsb); error = xfs_bunmapi(tp, ip, startoffset_fsb, endoffset_fsb - startoffset_fsb, 0, 2, &firstfsb, &free_list, NULL, &done); diff --git a/include/asm-generic/bitops/__ffs.h b/include/asm-generic/bitops/__ffs.h index 9a3274aecf8..937d7c43557 100644 --- a/include/asm-generic/bitops/__ffs.h +++ b/include/asm-generic/bitops/__ffs.h @@ -9,7 +9,7 @@ * * Undefined if no bit exists, so code should check against 0 first. */ -static inline unsigned long __ffs(unsigned long word) +static __always_inline unsigned long __ffs(unsigned long word) { int num = 0; diff --git a/include/asm-generic/bitops/__fls.h b/include/asm-generic/bitops/__fls.h index be24465403d..a60a7ccb678 100644 --- a/include/asm-generic/bitops/__fls.h +++ b/include/asm-generic/bitops/__fls.h @@ -9,7 +9,7 @@ * * Undefined if no set bit exists, so code should check against 0 first. */ -static inline unsigned long __fls(unsigned long word) +static __always_inline unsigned long __fls(unsigned long word) { int num = BITS_PER_LONG - 1; diff --git a/include/asm-generic/bitops/fls.h b/include/asm-generic/bitops/fls.h index 850859bc506..0576d1f42f4 100644 --- a/include/asm-generic/bitops/fls.h +++ b/include/asm-generic/bitops/fls.h @@ -9,7 +9,7 @@ * Note fls(0) = 0, fls(1) = 1, fls(0x80000000) = 32. */ -static inline int fls(int x) +static __always_inline int fls(int x) { int r = 32; diff --git a/include/asm-generic/bitops/fls64.h b/include/asm-generic/bitops/fls64.h index 86d403f8b25..b097cf8444e 100644 --- a/include/asm-generic/bitops/fls64.h +++ b/include/asm-generic/bitops/fls64.h @@ -15,7 +15,7 @@ * at position 64. */ #if BITS_PER_LONG == 32 -static inline int fls64(__u64 x) +static __always_inline int fls64(__u64 x) { __u32 h = x >> 32; if (h) @@ -23,7 +23,7 @@ static inline int fls64(__u64 x) return fls(x); } #elif BITS_PER_LONG == 64 -static inline int fls64(__u64 x) +static __always_inline int fls64(__u64 x) { if (x == 0) return 0; diff --git a/include/asm-generic/percpu.h b/include/asm-generic/percpu.h index b0e63c672eb..00f45ff081a 100644 --- a/include/asm-generic/percpu.h +++ b/include/asm-generic/percpu.h @@ -80,4 +80,56 @@ extern void setup_per_cpu_areas(void); #define DECLARE_PER_CPU(type, name) extern PER_CPU_ATTRIBUTES \ __typeof__(type) per_cpu_var(name) +/* + * Optional methods for optimized non-lvalue per-cpu variable access. + * + * @var can be a percpu variable or a field of it and its size should + * equal char, int or long. percpu_read() evaluates to a lvalue and + * all others to void. + * + * These operations are guaranteed to be atomic w.r.t. preemption. + * The generic versions use plain get/put_cpu_var(). Archs are + * encouraged to implement single-instruction alternatives which don't + * require preemption protection. + */ +#ifndef percpu_read +# define percpu_read(var) \ + ({ \ + typeof(per_cpu_var(var)) __tmp_var__; \ + __tmp_var__ = get_cpu_var(var); \ + put_cpu_var(var); \ + __tmp_var__; \ + }) +#endif + +#define __percpu_generic_to_op(var, val, op) \ +do { \ + get_cpu_var(var) op val; \ + put_cpu_var(var); \ +} while (0) + +#ifndef percpu_write +# define percpu_write(var, val) __percpu_generic_to_op(var, (val), =) +#endif + +#ifndef percpu_add +# define percpu_add(var, val) __percpu_generic_to_op(var, (val), +=) +#endif + +#ifndef percpu_sub +# define percpu_sub(var, val) __percpu_generic_to_op(var, (val), -=) +#endif + +#ifndef percpu_and +# define percpu_and(var, val) __percpu_generic_to_op(var, (val), &=) +#endif + +#ifndef percpu_or +# define percpu_or(var, val) __percpu_generic_to_op(var, (val), |=) +#endif + +#ifndef percpu_xor +# define percpu_xor(var, val) __percpu_generic_to_op(var, (val), ^=) +#endif + #endif /* _ASM_GENERIC_PERCPU_H_ */ diff --git a/include/asm-generic/sections.h b/include/asm-generic/sections.h index 79a7ff925bf..4ce48e87853 100644 --- a/include/asm-generic/sections.h +++ b/include/asm-generic/sections.h @@ -9,7 +9,7 @@ extern char __bss_start[], __bss_stop[]; extern char __init_begin[], __init_end[]; extern char _sinittext[], _einittext[]; extern char _end[]; -extern char __per_cpu_start[], __per_cpu_end[]; +extern char __per_cpu_load[], __per_cpu_start[], __per_cpu_end[]; extern char __kprobes_text_start[], __kprobes_text_end[]; extern char __initdata_begin[], __initdata_end[]; extern char __start_rodata[], __end_rodata[]; diff --git a/include/asm-generic/vmlinux.lds.h b/include/asm-generic/vmlinux.lds.h index c61fab1dd2f..f3180a85c66 100644 --- a/include/asm-generic/vmlinux.lds.h +++ b/include/asm-generic/vmlinux.lds.h @@ -430,12 +430,48 @@ *(.initcall7.init) \ *(.initcall7s.init) -#define PERCPU(align) \ - . = ALIGN(align); \ - VMLINUX_SYMBOL(__per_cpu_start) = .; \ - .data.percpu : AT(ADDR(.data.percpu) - LOAD_OFFSET) { \ +/** + * PERCPU_VADDR - define output section for percpu area + * @vaddr: explicit base address (optional) + * @phdr: destination PHDR (optional) + * + * Macro which expands to output section for percpu area. If @vaddr + * is not blank, it specifies explicit base address and all percpu + * symbols will be offset from the given address. If blank, @vaddr + * always equals @laddr + LOAD_OFFSET. + * + * @phdr defines the output PHDR to use if not blank. Be warned that + * output PHDR is sticky. If @phdr is specified, the next output + * section in the linker script will go there too. @phdr should have + * a leading colon. + * + * This macro defines three symbols, __per_cpu_load, __per_cpu_start + * and __per_cpu_end. The first one is the vaddr of loaded percpu + * init data. __per_cpu_start equals @vaddr and __per_cpu_end is the + * end offset. + */ +#define PERCPU_VADDR(vaddr, phdr) \ + VMLINUX_SYMBOL(__per_cpu_load_abs) = .; \ + .data.percpu vaddr : AT(VMLINUX_SYMBOL(__per_cpu_load_abs) \ + - LOAD_OFFSET) { \ + VMLINUX_SYMBOL(__per_cpu_start) = .; \ + VMLINUX_SYMBOL(__per_cpu_load) = LOADADDR(.data.percpu) + LOAD_OFFSET;\ + *(.data.percpu.first) \ *(.data.percpu.page_aligned) \ *(.data.percpu) \ *(.data.percpu.shared_aligned) \ - } \ - VMLINUX_SYMBOL(__per_cpu_end) = .; + VMLINUX_SYMBOL(__per_cpu_end) = .; \ + } phdr \ + . = VMLINUX_SYMBOL(__per_cpu_load_abs) + SIZEOF(.data.percpu); + +/** + * PERCPU - define output section for percpu area, simple version + * @align: required alignment + * + * Align to @align and outputs output section for percpu area. This + * macro doesn't maniuplate @vaddr or @phdr and __per_cpu_load and + * __per_cpu_start will be identical. + */ +#define PERCPU(align) \ + . = ALIGN(align); \ + PERCPU_VADDR( , ) diff --git a/include/asm-m68k/auxvec.h b/include/asm-m68k/auxvec.h deleted file mode 100644 index 844d6d52204..00000000000 --- a/include/asm-m68k/auxvec.h +++ /dev/null @@ -1,4 +0,0 @@ -#ifndef __ASMm68k_AUXVEC_H -#define __ASMm68k_AUXVEC_H - -#endif diff --git a/include/asm-m68k/device.h b/include/asm-m68k/device.h deleted file mode 100644 index d8f9872b0e2..00000000000 --- a/include/asm-m68k/device.h +++ /dev/null @@ -1,7 +0,0 @@ -/* - * Arch specific extensions to struct device - * - * This file is released under the GPLv2 - */ -#include <asm-generic/device.h> - diff --git a/include/asm-m68k/emergency-restart.h b/include/asm-m68k/emergency-restart.h deleted file mode 100644 index 108d8c48e42..00000000000 --- a/include/asm-m68k/emergency-restart.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_EMERGENCY_RESTART_H -#define _ASM_EMERGENCY_RESTART_H - -#include <asm-generic/emergency-restart.h> - -#endif /* _ASM_EMERGENCY_RESTART_H */ diff --git a/include/asm-m68k/futex.h b/include/asm-m68k/futex.h deleted file mode 100644 index 6a332a9f099..00000000000 --- a/include/asm-m68k/futex.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_FUTEX_H -#define _ASM_FUTEX_H - -#include <asm-generic/futex.h> - -#endif diff --git a/include/asm-m68k/ioctl.h b/include/asm-m68k/ioctl.h deleted file mode 100644 index b279fe06dfe..00000000000 --- a/include/asm-m68k/ioctl.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/ioctl.h> diff --git a/include/asm-m68k/irq_regs.h b/include/asm-m68k/irq_regs.h deleted file mode 100644 index 3dd9c0b7027..00000000000 --- a/include/asm-m68k/irq_regs.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/irq_regs.h> diff --git a/include/asm-m68k/kdebug.h b/include/asm-m68k/kdebug.h deleted file mode 100644 index 6ece1b03766..00000000000 --- a/include/asm-m68k/kdebug.h +++ /dev/null @@ -1 +0,0 @@ -#include <asm-generic/kdebug.h> diff --git a/include/asm-m68k/mutex.h b/include/asm-m68k/mutex.h deleted file mode 100644 index 458c1f7fbc1..00000000000 --- a/include/asm-m68k/mutex.h +++ /dev/null @@ -1,9 +0,0 @@ -/* - * Pull in the generic implementation for the mutex fastpath. - * - * TODO: implement optimized primitives instead, or leave the generic - * implementation in place, or pick the atomic_xchg() based generic - * implementation. (see asm-generic/mutex-xchg.h for details) - */ - -#include <asm-generic/mutex-dec.h> diff --git a/include/asm-m68k/topology.h b/include/asm-m68k/topology.h deleted file mode 100644 index ca173e9f26f..00000000000 --- a/include/asm-m68k/topology.h +++ /dev/null @@ -1,6 +0,0 @@ -#ifndef _ASM_M68K_TOPOLOGY_H -#define _ASM_M68K_TOPOLOGY_H - -#include <asm-generic/topology.h> - -#endif /* _ASM_M68K_TOPOLOGY_H */ diff --git a/include/drm/drm.h b/include/drm/drm.h index 32e5096554e..8e77357334a 100644 --- a/include/drm/drm.h +++ b/include/drm/drm.h @@ -458,7 +458,7 @@ enum drm_vblank_seq_type { _DRM_VBLANK_FLIP = 0x8000000, /**< Scheduled buffer swap should flip */ _DRM_VBLANK_NEXTONMISS = 0x10000000, /**< If missed, wait for next vblank */ _DRM_VBLANK_SECONDARY = 0x20000000, /**< Secondary display controller */ - _DRM_VBLANK_SIGNAL = 0x40000000 /**< Send signal instead of blocking */ + _DRM_VBLANK_SIGNAL = 0x40000000 /**< Send signal instead of blocking, unsupported */ }; #define _DRM_VBLANK_TYPES_MASK (_DRM_VBLANK_ABSOLUTE | _DRM_VBLANK_RELATIVE) diff --git a/include/drm/drmP.h b/include/drm/drmP.h index afb7858c068..8190b9bcc2d 100644 --- a/include/drm/drmP.h +++ b/include/drm/drmP.h @@ -545,13 +545,6 @@ struct drm_ctx_list { struct drm_file *tag; /**< associated fd private data */ }; -struct drm_vbl_sig { - struct list_head head; - unsigned int sequence; - struct siginfo info; - struct task_struct *task; -}; - /* location of GART table */ #define DRM_ATI_GART_MAIN 1 #define DRM_ATI_GART_FB 2 @@ -903,8 +896,6 @@ struct drm_device { wait_queue_head_t *vbl_queue; /**< VBLANK wait queue */ atomic_t *_vblank_count; /**< number of VBLANK interrupts (driver must alloc the right number of counters) */ spinlock_t vbl_lock; - struct list_head *vbl_sigs; /**< signal list to send on VBLANK */ - atomic_t vbl_signal_pending; /* number of signals pending on all crtcs*/ atomic_t *vblank_refcount; /* number of users of vblank interruptsper crtc */ u32 *last_vblank; /* protected by dev->vbl_lock, used */ /* for wraparound handling */ diff --git a/include/drm/drm_crtc.h b/include/drm/drm_crtc.h index 47809ac94bc..d54de24bf37 100644 --- a/include/drm/drm_crtc.h +++ b/include/drm/drm_crtc.h @@ -528,7 +528,8 @@ struct drm_mode_group { * */ struct drm_mode_config { - struct mutex mutex; /* protects configuration and IDR */ + struct mutex mutex; /* protects configuration (mode lists etc.) */ + struct mutex idr_mutex; /* for IDR management */ struct idr crtc_idr; /* use this idr for all IDs, fb, crtc, connector, modes - just makes life easier */ /* this is limited to one for now */ int num_fb; diff --git a/include/linux/debugfs.h b/include/linux/debugfs.h index 23936b16426..af0e01d4c66 100644 --- a/include/linux/debugfs.h +++ b/include/linux/debugfs.h @@ -162,6 +162,13 @@ static inline struct dentry *debugfs_create_x32(const char *name, mode_t mode, return ERR_PTR(-ENODEV); } +static inline struct dentry *debugfs_create_size_t(const char *name, mode_t mode, + struct dentry *parent, + size_t *value) +{ + return ERR_PTR(-ENODEV); +} + static inline struct dentry *debugfs_create_bool(const char *name, mode_t mode, struct dentry *parent, u32 *value) diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h index c73f1e2b59b..3e0f64c335c 100644 --- a/include/linux/dmaengine.h +++ b/include/linux/dmaengine.h @@ -297,6 +297,11 @@ static inline void async_tx_ack(struct dma_async_tx_descriptor *tx) tx->flags |= DMA_CTRL_ACK; } +static inline void async_tx_clear_ack(struct dma_async_tx_descriptor *tx) +{ + tx->flags &= ~DMA_CTRL_ACK; +} + static inline bool async_tx_test_ack(struct dma_async_tx_descriptor *tx) { return (tx->flags & DMA_CTRL_ACK) == DMA_CTRL_ACK; @@ -400,11 +405,16 @@ static inline enum dma_status dma_async_is_complete(dma_cookie_t cookie, enum dma_status dma_sync_wait(struct dma_chan *chan, dma_cookie_t cookie); #ifdef CONFIG_DMA_ENGINE enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx); +void dma_issue_pending_all(void); #else static inline enum dma_status dma_wait_for_async_tx(struct dma_async_tx_descriptor *tx) { return DMA_SUCCESS; } +static inline void dma_issue_pending_all(void) +{ + do { } while (0); +} #endif /* --- DMA device --- */ @@ -413,7 +423,6 @@ int dma_async_device_register(struct dma_device *device); void dma_async_device_unregister(struct dma_device *device); void dma_run_dependencies(struct dma_async_tx_descriptor *tx); struct dma_chan *dma_find_channel(enum dma_transaction_type tx_type); -void dma_issue_pending_all(void); #define dma_request_channel(mask, x, y) __dma_request_channel(&(mask), x, y) struct dma_chan *__dma_request_channel(dma_cap_mask_t *mask, dma_filter_fn fn, void *fn_param); void dma_release_channel(struct dma_chan *chan); diff --git a/include/linux/dmi.h b/include/linux/dmi.h index 34161907b2f..d741b9ceb0e 100644 --- a/include/linux/dmi.h +++ b/include/linux/dmi.h @@ -38,6 +38,7 @@ struct dmi_device { #ifdef CONFIG_DMI extern int dmi_check_system(const struct dmi_system_id *list); +const struct dmi_system_id *dmi_first_match(const struct dmi_system_id *list); extern const char * dmi_get_system_info(int field); extern const struct dmi_device * dmi_find_device(int type, const char *name, const struct dmi_device *from); @@ -64,6 +65,8 @@ static inline int dmi_walk(void (*decode)(const struct dmi_header *)) { return -1; } static inline bool dmi_match(enum dmi_field f, const char *str) { return false; } +static inline const struct dmi_system_id * + dmi_first_match(const struct dmi_system_id *list) { return NULL; } #endif diff --git a/include/linux/i2c-id.h b/include/linux/i2c-id.h index 01d67ba9e98..1ffc23bc5d1 100644 --- a/include/linux/i2c-id.h +++ b/include/linux/i2c-id.h @@ -40,9 +40,7 @@ #define I2C_DRIVERID_SAA7185B 13 /* video encoder */ #define I2C_DRIVERID_SAA7110 22 /* video decoder */ #define I2C_DRIVERID_SAA5249 24 /* SAA5249 and compatibles */ -#define I2C_DRIVERID_PCF8583 25 /* real time clock */ #define I2C_DRIVERID_TDA7432 27 /* Stereo sound processor */ -#define I2C_DRIVERID_TVMIXER 28 /* Mixer driver for tv cards */ #define I2C_DRIVERID_TVAUDIO 29 /* Generic TV sound driver */ #define I2C_DRIVERID_TDA9875 32 /* TV sound decoder chip */ #define I2C_DRIVERID_BT819 40 /* video decoder */ @@ -54,7 +52,6 @@ #define I2C_DRIVERID_SAA7191 57 /* video decoder */ #define I2C_DRIVERID_INDYCAM 58 /* SGI IndyCam */ #define I2C_DRIVERID_OVCAMCHIP 61 /* OmniVision CMOS image sens. */ -#define I2C_DRIVERID_MAX6900 63 /* MAX6900 real-time clock */ #define I2C_DRIVERID_SAA6752HS 67 /* MPEG2 encoder */ #define I2C_DRIVERID_TVEEPROM 68 /* TV EEPROM */ #define I2C_DRIVERID_WM8775 69 /* wm8775 audio processor */ @@ -62,23 +59,16 @@ #define I2C_DRIVERID_CX25840 71 /* cx2584x video encoder */ #define I2C_DRIVERID_SAA7127 72 /* saa7127 video encoder */ #define I2C_DRIVERID_SAA711X 73 /* saa711x video encoders */ -#define I2C_DRIVERID_AKITAIOEXP 74 /* IO Expander on Sharp SL-C1000 */ #define I2C_DRIVERID_INFRARED 75 /* I2C InfraRed on Video boards */ #define I2C_DRIVERID_TVP5150 76 /* TVP5150 video decoder */ #define I2C_DRIVERID_WM8739 77 /* wm8739 audio processor */ #define I2C_DRIVERID_UPD64083 78 /* upd64083 video processor */ #define I2C_DRIVERID_UPD64031A 79 /* upd64031a video processor */ #define I2C_DRIVERID_SAA717X 80 /* saa717x video encoder */ -#define I2C_DRIVERID_DS1672 81 /* Dallas/Maxim DS1672 RTC */ #define I2C_DRIVERID_BT866 85 /* Conexant bt866 video encoder */ #define I2C_DRIVERID_KS0127 86 /* Samsung ks0127 video decoder */ #define I2C_DRIVERID_TLV320AIC23B 87 /* TI TLV320AIC23B audio codec */ -#define I2C_DRIVERID_WM8731 89 /* Wolfson WM8731 audio codec */ -#define I2C_DRIVERID_WM8750 90 /* Wolfson WM8750 audio codec */ -#define I2C_DRIVERID_WM8753 91 /* Wolfson WM8753 audio codec */ -#define I2C_DRIVERID_LM4857 92 /* LM4857 Audio Amplifier */ #define I2C_DRIVERID_VP27SMPX 93 /* Panasonic VP27s tuner internal MPX */ -#define I2C_DRIVERID_CS4270 94 /* Cirrus Logic 4270 audio codec */ #define I2C_DRIVERID_M52790 95 /* Mitsubishi M52790SP/FP AV switch */ #define I2C_DRIVERID_CS5345 96 /* cs5345 audio processor */ @@ -89,74 +79,23 @@ */ /* --- Bit algorithm adapters */ -#define I2C_HW_B_LP 0x010000 /* Parallel port Philips style */ #define I2C_HW_B_BT848 0x010005 /* BT848 video boards */ -#define I2C_HW_B_VIA 0x010007 /* Via vt82c586b */ -#define I2C_HW_B_HYDRA 0x010008 /* Apple Hydra Mac I/O */ -#define I2C_HW_B_I810 0x01000a /* Intel I810 */ -#define I2C_HW_B_VOO 0x01000b /* 3dfx Voodoo 3 / Banshee */ -#define I2C_HW_B_SCX200 0x01000e /* Nat'l Semi SCx200 I2C */ #define I2C_HW_B_RIVA 0x010010 /* Riva based graphics cards */ -#define I2C_HW_B_IOC 0x010011 /* IOC bit-wiggling */ -#define I2C_HW_B_IXP2000 0x010016 /* GPIO on IXP2000 systems */ #define I2C_HW_B_ZR36067 0x010019 /* Zoran-36057/36067 based boards */ -#define I2C_HW_B_PCILYNX 0x01001a /* TI PCILynx I2C adapter */ #define I2C_HW_B_CX2388x 0x01001b /* connexant 2388x based tv cards */ -#define I2C_HW_B_NVIDIA 0x01001c /* nvidia framebuffer driver */ -#define I2C_HW_B_SAVAGE 0x01001d /* savage framebuffer driver */ -#define I2C_HW_B_RADEON 0x01001e /* radeon framebuffer driver */ #define I2C_HW_B_EM28XX 0x01001f /* em28xx video capture cards */ #define I2C_HW_B_CX2341X 0x010020 /* Conexant CX2341X MPEG encoder cards */ -#define I2C_HW_B_INTELFB 0x010021 /* intel framebuffer driver */ #define I2C_HW_B_CX23885 0x010022 /* conexant 23885 based tv cards (bus1) */ #define I2C_HW_B_AU0828 0x010023 /* auvitek au0828 usb bridge */ -/* --- PCF 8584 based algorithms */ -#define I2C_HW_P_ELEK 0x020002 /* Elektor ISA Bus inteface card */ - -/* --- PCA 9564 based algorithms */ -#define I2C_HW_A_ISA 0x1a0000 /* generic ISA Bus interface card */ - -/* --- PowerPC on-chip adapters */ -#define I2C_HW_OCP 0x120000 /* IBM on-chip I2C adapter */ - -/* --- Broadcom SiByte adapters */ -#define I2C_HW_SIBYTE 0x150000 - /* --- SGI adapters */ #define I2C_HW_SGI_VINO 0x160000 -/* --- XSCALE on-chip adapters */ -#define I2C_HW_IOP3XX 0x140000 - -/* --- Au1550 PSC adapters adapters */ -#define I2C_HW_AU1550_PSC 0x1b0000 - /* --- SMBus only adapters */ -#define I2C_HW_SMBUS_PIIX4 0x040000 -#define I2C_HW_SMBUS_ALI15X3 0x040001 -#define I2C_HW_SMBUS_VIA2 0x040002 -#define I2C_HW_SMBUS_I801 0x040004 -#define I2C_HW_SMBUS_AMD756 0x040005 -#define I2C_HW_SMBUS_SIS5595 0x040006 -#define I2C_HW_SMBUS_ALI1535 0x040007 -#define I2C_HW_SMBUS_SIS630 0x040008 -#define I2C_HW_SMBUS_SIS96X 0x040009 -#define I2C_HW_SMBUS_AMD8111 0x04000a -#define I2C_HW_SMBUS_SCX200 0x04000b -#define I2C_HW_SMBUS_NFORCE2 0x04000c #define I2C_HW_SMBUS_W9968CF 0x04000d #define I2C_HW_SMBUS_OV511 0x04000e /* OV511(+) USB 1.1 webcam ICs */ #define I2C_HW_SMBUS_OV518 0x04000f /* OV518(+) USB 1.1 webcam ICs */ #define I2C_HW_SMBUS_CAFE 0x040012 /* Marvell 88ALP01 "CAFE" cam */ -#define I2C_HW_SMBUS_ALI1563 0x040013 - -/* --- MCP107 adapter */ -#define I2C_HW_MPC107 0x0d0000 - -/* --- Embedded adapters */ -#define I2C_HW_MV64XXX 0x190000 -#define I2C_HW_BLACKFIN 0x190001 /* ADI Blackfin I2C TWI driver */ /* --- Miscellaneous adapters */ #define I2C_HW_SAA7146 0x060000 /* SAA7146 video decoder bus */ diff --git a/include/linux/i2c.h b/include/linux/i2c.h index 20873d40246..fcfbfea3af7 100644 --- a/include/linux/i2c.h +++ b/include/linux/i2c.h @@ -151,7 +151,7 @@ struct i2c_driver { * has been dynamically allocated by the driver in the function above, * it must be freed here. (LEGACY I2C DRIVERS ONLY) */ - int (*detach_client)(struct i2c_client *); + int (*detach_client)(struct i2c_client *) __deprecated; /* Standard driver model interfaces, for "new style" i2c drivers. * With the driver model, device enumeration is NEVER done by drivers; @@ -429,8 +429,10 @@ static inline int i2c_add_driver(struct i2c_driver *driver) return i2c_register_driver(THIS_MODULE, driver); } -extern int i2c_attach_client(struct i2c_client *); -extern int i2c_detach_client(struct i2c_client *); +/* These are deprecated, your driver should use the standard .probe() + * and .remove() methods instead. */ +extern int __deprecated i2c_attach_client(struct i2c_client *); +extern int __deprecated i2c_detach_client(struct i2c_client *); extern struct i2c_client *i2c_use_client(struct i2c_client *client); extern void i2c_release_client(struct i2c_client *client); diff --git a/include/linux/if_frad.h b/include/linux/if_frad.h index 5c34240de74..60e16a551dd 100644 --- a/include/linux/if_frad.h +++ b/include/linux/if_frad.h @@ -26,8 +26,6 @@ #include <linux/if.h> -#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE) - /* Structures and constants associated with the DLCI device driver */ struct dlci_add @@ -127,6 +125,8 @@ struct frad_conf #ifdef __KERNEL__ +#if defined(CONFIG_DLCI) || defined(CONFIG_DLCI_MODULE) + /* these are the fields of an RFC 1490 header */ struct frhdr { @@ -190,12 +190,10 @@ struct frad_local int buffer; /* current buffer for S508 firmware */ }; -#endif /* __KERNEL__ */ - #endif /* CONFIG_DLCI || CONFIG_DLCI_MODULE */ -#ifdef __KERNEL__ extern void dlci_ioctl_set(int (*hook)(unsigned int, void __user *)); -#endif + +#endif /* __KERNEL__ */ #endif diff --git a/include/linux/init_task.h b/include/linux/init_task.h index 2f3c2d4ef73..ea0ea1a4c36 100644 --- a/include/linux/init_task.h +++ b/include/linux/init_task.h @@ -48,6 +48,12 @@ extern struct fs_struct init_fs; .posix_timers = LIST_HEAD_INIT(sig.posix_timers), \ .cpu_timers = INIT_CPU_TIMERS(sig.cpu_timers), \ .rlim = INIT_RLIMITS, \ + .cputime = { .totals = { \ + .utime = cputime_zero, \ + .stime = cputime_zero, \ + .sum_exec_runtime = 0, \ + .lock = __SPIN_LOCK_UNLOCKED(sig.cputime.totals.lock), \ + }, }, \ } extern struct nsproxy init_nsproxy; diff --git a/include/linux/interrupt.h b/include/linux/interrupt.h index 9127f6b51a3..472f11765f6 100644 --- a/include/linux/interrupt.h +++ b/include/linux/interrupt.h @@ -467,6 +467,7 @@ int show_interrupts(struct seq_file *p, void *v); struct irq_desc; extern int early_irq_init(void); +extern int arch_probe_nr_irqs(void); extern int arch_early_irq_init(void); extern int arch_init_chip_data(struct irq_desc *desc, int cpu); diff --git a/include/linux/irq.h b/include/linux/irq.h index f899b502f18..27a67536511 100644 --- a/include/linux/irq.h +++ b/include/linux/irq.h @@ -182,11 +182,11 @@ struct irq_desc { unsigned int irqs_unhandled; spinlock_t lock; #ifdef CONFIG_SMP - cpumask_t affinity; + cpumask_var_t affinity; unsigned int cpu; -#endif #ifdef CONFIG_GENERIC_PENDING_IRQ - cpumask_t pending_mask; + cpumask_var_t pending_mask; +#endif #endif #ifdef CONFIG_PROC_FS struct proc_dir_entry *dir; @@ -422,4 +422,84 @@ extern int set_irq_msi(unsigned int irq, struct msi_desc *entry); #endif /* !CONFIG_S390 */ +#ifdef CONFIG_SMP +/** + * init_alloc_desc_masks - allocate cpumasks for irq_desc + * @desc: pointer to irq_desc struct + * @cpu: cpu which will be handling the cpumasks + * @boot: true if need bootmem + * + * Allocates affinity and pending_mask cpumask if required. + * Returns true if successful (or not required). + * Side effect: affinity has all bits set, pending_mask has all bits clear. + */ +static inline bool init_alloc_desc_masks(struct irq_desc *desc, int cpu, + bool boot) +{ + int node; + + if (boot) { + alloc_bootmem_cpumask_var(&desc->affinity); + cpumask_setall(desc->affinity); + +#ifdef CONFIG_GENERIC_PENDING_IRQ + alloc_bootmem_cpumask_var(&desc->pending_mask); + cpumask_clear(desc->pending_mask); +#endif + return true; + } + + node = cpu_to_node(cpu); + + if (!alloc_cpumask_var_node(&desc->affinity, GFP_ATOMIC, node)) + return false; + cpumask_setall(desc->affinity); + +#ifdef CONFIG_GENERIC_PENDING_IRQ + if (!alloc_cpumask_var_node(&desc->pending_mask, GFP_ATOMIC, node)) { + free_cpumask_var(desc->affinity); + return false; + } + cpumask_clear(desc->pending_mask); +#endif + return true; +} + +/** + * init_copy_desc_masks - copy cpumasks for irq_desc + * @old_desc: pointer to old irq_desc struct + * @new_desc: pointer to new irq_desc struct + * + * Insures affinity and pending_masks are copied to new irq_desc. + * If !CONFIG_CPUMASKS_OFFSTACK the cpumasks are embedded in the + * irq_desc struct so the copy is redundant. + */ + +static inline void init_copy_desc_masks(struct irq_desc *old_desc, + struct irq_desc *new_desc) +{ +#ifdef CONFIG_CPUMASKS_OFFSTACK + cpumask_copy(new_desc->affinity, old_desc->affinity); + +#ifdef CONFIG_GENERIC_PENDING_IRQ + cpumask_copy(new_desc->pending_mask, old_desc->pending_mask); +#endif +#endif +} + +#else /* !CONFIG_SMP */ + +static inline bool init_alloc_desc_masks(struct irq_desc *desc, int cpu, + bool boot) +{ + return true; +} + +static inline void init_copy_desc_masks(struct irq_desc *old_desc, + struct irq_desc *new_desc) +{ +} + +#endif /* CONFIG_SMP */ + #endif /* _LINUX_IRQ_H */ diff --git a/include/linux/irqnr.h b/include/linux/irqnr.h index 86af92e9e84..887477bc2ab 100644 --- a/include/linux/irqnr.h +++ b/include/linux/irqnr.h @@ -20,6 +20,7 @@ # define for_each_irq_desc_reverse(irq, desc) \ for (irq = nr_irqs - 1; irq >= 0; irq--) + #else /* CONFIG_GENERIC_HARDIRQS */ extern int nr_irqs; diff --git a/include/linux/klist.h b/include/linux/klist.h index d5a27af9dba..e91a4e59b77 100644 --- a/include/linux/klist.h +++ b/include/linux/klist.h @@ -22,7 +22,7 @@ struct klist { struct list_head k_list; void (*get)(struct klist_node *); void (*put)(struct klist_node *); -}; +} __attribute__ ((aligned (4))); #define KLIST_INIT(_name, _get, _put) \ { .k_lock = __SPIN_LOCK_UNLOCKED(_name.k_lock), \ diff --git a/include/linux/libata.h b/include/linux/libata.h index 2c6bd66209f..bca3ba25f52 100644 --- a/include/linux/libata.h +++ b/include/linux/libata.h @@ -187,6 +187,8 @@ enum { ATA_FLAG_PIO_POLLING = (1 << 9), /* use polling PIO if LLD * doesn't handle PIO interrupts */ ATA_FLAG_NCQ = (1 << 10), /* host supports NCQ */ + ATA_FLAG_NO_POWEROFF_SPINDOWN = (1 << 11), /* don't spindown before poweroff */ + ATA_FLAG_NO_HIBERNATE_SPINDOWN = (1 << 12), /* don't spindown before hibernation */ ATA_FLAG_DEBUGMSG = (1 << 13), ATA_FLAG_IGN_SIMPLEX = (1 << 15), /* ignore SIMPLEX */ ATA_FLAG_NO_IORDY = (1 << 16), /* controller lacks iordy */ diff --git a/include/linux/magic.h b/include/linux/magic.h index 0b4df7eba85..5b4e28bcb78 100644 --- a/include/linux/magic.h +++ b/include/linux/magic.h @@ -49,4 +49,5 @@ #define FUTEXFS_SUPER_MAGIC 0xBAD1DEA #define INOTIFYFS_SUPER_MAGIC 0x2BAD1DEA +#define STACK_END_MAGIC 0x57AC6E9D #endif /* __LINUX_MAGIC_H__ */ diff --git a/include/linux/mod_devicetable.h b/include/linux/mod_devicetable.h index 97b91d1abb4..fde86671f48 100644 --- a/include/linux/mod_devicetable.h +++ b/include/linux/mod_devicetable.h @@ -443,6 +443,13 @@ struct dmi_system_id { struct dmi_strmatch matches[4]; void *driver_data; }; +/* + * struct dmi_device_id appears during expansion of + * "MODULE_DEVICE_TABLE(dmi, x)". Compiler doesn't look inside it + * but this is enough for gcc 3.4.6 to error out: + * error: storage size of '__mod_dmi_device_table' isn't known + */ +#define dmi_device_id dmi_system_id #endif #define DMI_MATCH(a, b) { a, b } diff --git a/include/linux/pci.h b/include/linux/pci.h index 80f8b8b65fd..48890cf3f96 100644 --- a/include/linux/pci.h +++ b/include/linux/pci.h @@ -117,6 +117,10 @@ typedef int __bitwise pci_power_t; #define PCI_UNKNOWN ((pci_power_t __force) 5) #define PCI_POWER_ERROR ((pci_power_t __force) -1) +#define PCI_PM_D2_DELAY 200 +#define PCI_PM_D3_WAIT 10 +#define PCI_PM_BUS_WAIT 50 + /** The pci_channel state describes connectivity between the CPU and * the pci device. If some PCI bus between here and the pci device * has crashed or locked up, this info is reflected here. @@ -252,6 +256,7 @@ struct pci_dev { unsigned int ari_enabled:1; /* ARI forwarding */ unsigned int is_managed:1; unsigned int is_pcie:1; + unsigned int state_saved:1; pci_dev_flags_t dev_flags; atomic_t enable_cnt; /* pci_enable_device has been called */ diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h index d56ad9c21c0..febc10ed385 100644 --- a/include/linux/pci_ids.h +++ b/include/linux/pci_ids.h @@ -1357,6 +1357,7 @@ #define PCI_DEVICE_ID_VIA_8783_0 0x3208 #define PCI_DEVICE_ID_VIA_8237 0x3227 #define PCI_DEVICE_ID_VIA_8251 0x3287 +#define PCI_DEVICE_ID_VIA_8261 0x3402 #define PCI_DEVICE_ID_VIA_8237A 0x3337 #define PCI_DEVICE_ID_VIA_8237S 0x3372 #define PCI_DEVICE_ID_VIA_SATA_EIDE 0x5324 @@ -1366,10 +1367,13 @@ #define PCI_DEVICE_ID_VIA_CX700 0x8324 #define PCI_DEVICE_ID_VIA_CX700_IDE 0x0581 #define PCI_DEVICE_ID_VIA_VX800 0x8353 +#define PCI_DEVICE_ID_VIA_VX855 0x8409 #define PCI_DEVICE_ID_VIA_8371_1 0x8391 #define PCI_DEVICE_ID_VIA_82C598_1 0x8598 #define PCI_DEVICE_ID_VIA_838X_1 0xB188 #define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198 +#define PCI_DEVICE_ID_VIA_C409_IDE 0XC409 +#define PCI_DEVICE_ID_VIA_ANON 0xFFFF #define PCI_VENDOR_ID_SIEMENS 0x110A #define PCI_DEVICE_ID_SIEMENS_DSCC4 0x2102 diff --git a/include/linux/percpu.h b/include/linux/percpu.h index 9f2a3751873..0e24202b5a4 100644 --- a/include/linux/percpu.h +++ b/include/linux/percpu.h @@ -9,34 +9,39 @@ #include <asm/percpu.h> #ifdef CONFIG_SMP -#define DEFINE_PER_CPU(type, name) \ - __attribute__((__section__(".data.percpu"))) \ - PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name +#define PER_CPU_BASE_SECTION ".data.percpu" #ifdef MODULE -#define SHARED_ALIGNED_SECTION ".data.percpu" +#define PER_CPU_SHARED_ALIGNED_SECTION "" #else -#define SHARED_ALIGNED_SECTION ".data.percpu.shared_aligned" +#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned" #endif +#define PER_CPU_FIRST_SECTION ".first" -#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \ - __attribute__((__section__(SHARED_ALIGNED_SECTION))) \ - PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name \ - ____cacheline_aligned_in_smp +#else + +#define PER_CPU_BASE_SECTION ".data" +#define PER_CPU_SHARED_ALIGNED_SECTION "" +#define PER_CPU_FIRST_SECTION "" + +#endif -#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \ - __attribute__((__section__(".data.percpu.page_aligned"))) \ +#define DEFINE_PER_CPU_SECTION(type, name, section) \ + __attribute__((__section__(PER_CPU_BASE_SECTION section))) \ PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name -#else + #define DEFINE_PER_CPU(type, name) \ - PER_CPU_ATTRIBUTES __typeof__(type) per_cpu__##name + DEFINE_PER_CPU_SECTION(type, name, "") -#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \ - DEFINE_PER_CPU(type, name) +#define DEFINE_PER_CPU_SHARED_ALIGNED(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, PER_CPU_SHARED_ALIGNED_SECTION) \ + ____cacheline_aligned_in_smp -#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \ - DEFINE_PER_CPU(type, name) -#endif +#define DEFINE_PER_CPU_PAGE_ALIGNED(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, ".page_aligned") + +#define DEFINE_PER_CPU_FIRST(type, name) \ + DEFINE_PER_CPU_SECTION(type, name, PER_CPU_FIRST_SECTION) #define EXPORT_PER_CPU_SYMBOL(var) EXPORT_SYMBOL(per_cpu__##var) #define EXPORT_PER_CPU_SYMBOL_GPL(var) EXPORT_SYMBOL_GPL(per_cpu__##var) diff --git a/include/linux/quotaops.h b/include/linux/quotaops.h index 21b781a3350..0b35b3a1be0 100644 --- a/include/linux/quotaops.h +++ b/include/linux/quotaops.h @@ -24,10 +24,8 @@ void sync_dquots(struct super_block *sb, int type); int dquot_initialize(struct inode *inode, int type); int dquot_drop(struct inode *inode); -int dquot_drop_locked(struct inode *inode); struct dquot *dqget(struct super_block *sb, unsigned int id, int type); void dqput(struct dquot *dquot); -int dquot_is_cached(struct super_block *sb, unsigned int id, int type); int dquot_scan_active(struct super_block *sb, int (*fn)(struct dquot *dquot, unsigned long priv), unsigned long priv); diff --git a/include/linux/sched.h b/include/linux/sched.h index 4cae9b81a1f..681394f3a0c 100644 --- a/include/linux/sched.h +++ b/include/linux/sched.h @@ -293,6 +293,9 @@ extern void sched_show_task(struct task_struct *p); extern void softlockup_tick(void); extern void touch_softlockup_watchdog(void); extern void touch_all_softlockup_watchdogs(void); +extern int proc_dosoftlockup_thresh(struct ctl_table *table, int write, + struct file *filp, void __user *buffer, + size_t *lenp, loff_t *ppos); extern unsigned int softlockup_panic; extern unsigned long sysctl_hung_task_check_count; extern unsigned long sysctl_hung_task_timeout_secs; @@ -450,6 +453,7 @@ struct task_cputime { cputime_t utime; cputime_t stime; unsigned long long sum_exec_runtime; + spinlock_t lock; }; /* Alternate field names when used to cache expirations. */ #define prof_exp stime @@ -465,7 +469,7 @@ struct task_cputime { * used for thread group CPU clock calculations. */ struct thread_group_cputime { - struct task_cputime *totals; + struct task_cputime totals; }; /* @@ -1157,10 +1161,9 @@ struct task_struct { pid_t pid; pid_t tgid; -#ifdef CONFIG_CC_STACKPROTECTOR /* Canary value for the -fstack-protector gcc feature */ unsigned long stack_canary; -#endif + /* * pointers to (original) parent process, youngest child, younger sibling, * older sibling, respectively. (p->father can be replaced with @@ -2066,6 +2069,19 @@ static inline int object_is_on_stack(void *obj) extern void thread_info_cache_init(void); +#ifdef CONFIG_DEBUG_STACK_USAGE +static inline unsigned long stack_not_used(struct task_struct *p) +{ + unsigned long *n = end_of_stack(p); + + do { /* Skip over canary */ + n++; + } while (!*n); + + return (unsigned long)n - (unsigned long)end_of_stack(p); +} +#endif + /* set thread flags in other task's structures * - see asm/thread_info.h for TIF_xxxx flags available */ @@ -2180,24 +2196,30 @@ static inline int spin_needbreak(spinlock_t *lock) * Thread group CPU time accounting. */ -extern int thread_group_cputime_alloc(struct task_struct *); -extern void thread_group_cputime(struct task_struct *, struct task_cputime *); - -static inline void thread_group_cputime_init(struct signal_struct *sig) +static inline +void thread_group_cputime(struct task_struct *tsk, struct task_cputime *times) { - sig->cputime.totals = NULL; + struct task_cputime *totals = &tsk->signal->cputime.totals; + unsigned long flags; + + spin_lock_irqsave(&totals->lock, flags); + *times = *totals; + spin_unlock_irqrestore(&totals->lock, flags); } -static inline int thread_group_cputime_clone_thread(struct task_struct *curr) +static inline void thread_group_cputime_init(struct signal_struct *sig) { - if (curr->signal->cputime.totals) - return 0; - return thread_group_cputime_alloc(curr); + sig->cputime.totals = (struct task_cputime){ + .utime = cputime_zero, + .stime = cputime_zero, + .sum_exec_runtime = 0, + }; + + spin_lock_init(&sig->cputime.totals.lock); } static inline void thread_group_cputime_free(struct signal_struct *sig) { - free_percpu(sig->cputime.totals); } /* diff --git a/include/linux/stackprotector.h b/include/linux/stackprotector.h new file mode 100644 index 00000000000..6f3e54c704c --- /dev/null +++ b/include/linux/stackprotector.h @@ -0,0 +1,16 @@ +#ifndef _LINUX_STACKPROTECTOR_H +#define _LINUX_STACKPROTECTOR_H 1 + +#include <linux/compiler.h> +#include <linux/sched.h> +#include <linux/random.h> + +#ifdef CONFIG_CC_STACKPROTECTOR +# include <asm/stackprotector.h> +#else +static inline void boot_init_stack_canary(void) +{ +} +#endif + +#endif diff --git a/include/linux/suspend.h b/include/linux/suspend.h index 2b409c44db8..c7d9bb1832b 100644 --- a/include/linux/suspend.h +++ b/include/linux/suspend.h @@ -237,6 +237,7 @@ extern int hibernate_nvs_alloc(void); extern void hibernate_nvs_free(void); extern void hibernate_nvs_save(void); extern void hibernate_nvs_restore(void); +extern bool system_entering_hibernation(void); #else /* CONFIG_HIBERNATION */ static inline int swsusp_page_is_forbidden(struct page *p) { return 0; } static inline void swsusp_set_page_free(struct page *p) {} @@ -252,6 +253,7 @@ static inline int hibernate_nvs_alloc(void) { return 0; } static inline void hibernate_nvs_free(void) {} static inline void hibernate_nvs_save(void) {} static inline void hibernate_nvs_restore(void) {} +static inline bool system_entering_hibernation(void) { return false; } #endif /* CONFIG_HIBERNATION */ #ifdef CONFIG_PM_SLEEP diff --git a/include/linux/topology.h b/include/linux/topology.h index e632d29f054..a16b9e06f2e 100644 --- a/include/linux/topology.h +++ b/include/linux/topology.h @@ -193,5 +193,11 @@ int arch_update_cpu_topology(void); #ifndef topology_core_siblings #define topology_core_siblings(cpu) cpumask_of_cpu(cpu) #endif +#ifndef topology_thread_cpumask +#define topology_thread_cpumask(cpu) cpumask_of(cpu) +#endif +#ifndef topology_core_cpumask +#define topology_core_cpumask(cpu) cpumask_of(cpu) +#endif #endif /* _LINUX_TOPOLOGY_H */ diff --git a/include/linux/usb.h b/include/linux/usb.h index 85ee9be9361..88079fd6023 100644 --- a/include/linux/usb.h +++ b/include/linux/usb.h @@ -418,6 +418,8 @@ struct usb_tt; * @autosuspend_disabled: autosuspend disabled by the user * @autoresume_disabled: autoresume disabled by the user * @skip_sys_resume: skip the next system resume + * @wusb_dev: if this is a Wireless USB device, link to the WUSB + * specific data for the device. * * Notes: * Usbcore drivers should not set usbdev->state directly. Instead use diff --git a/include/linux/usb/usbnet.h b/include/linux/usb/usbnet.h index ba09fe88add..7d382224307 100644 --- a/include/linux/usb/usbnet.h +++ b/include/linux/usb/usbnet.h @@ -197,7 +197,9 @@ extern int usbnet_nway_reset(struct net_device *net); #define devdbg(usbnet, fmt, arg...) \ printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , ## arg) #else -#define devdbg(usbnet, fmt, arg...) do {} while(0) +#define devdbg(usbnet, fmt, arg...) \ + ({ if (0) printk(KERN_DEBUG "%s: " fmt "\n" , (usbnet)->net->name , \ + ## arg); 0; }) #endif #define deverr(usbnet, fmt, arg...) \ diff --git a/include/linux/workqueue.h b/include/linux/workqueue.h index b36291130f2..3cd51e579ab 100644 --- a/include/linux/workqueue.h +++ b/include/linux/workqueue.h @@ -118,12 +118,24 @@ struct execute_work { init_timer(&(_work)->timer); \ } while (0) +#define INIT_DELAYED_WORK_ON_STACK(_work, _func) \ + do { \ + INIT_WORK(&(_work)->work, (_func)); \ + init_timer_on_stack(&(_work)->timer); \ + } while (0) + #define INIT_DELAYED_WORK_DEFERRABLE(_work, _func) \ do { \ INIT_WORK(&(_work)->work, (_func)); \ init_timer_deferrable(&(_work)->timer); \ } while (0) +#define INIT_DELAYED_WORK_ON_STACK(_work, _func) \ + do { \ + INIT_WORK(&(_work)->work, (_func)); \ + init_timer_on_stack(&(_work)->timer); \ + } while (0) + /** * work_pending - Find out whether a work item is currently pending * @work: The work item in question diff --git a/include/net/mac80211.h b/include/net/mac80211.h index b3bd00a9d99..559422fc094 100644 --- a/include/net/mac80211.h +++ b/include/net/mac80211.h @@ -322,7 +322,6 @@ struct ieee80211_tx_rate { * @control: union for control data * @status: union for status data * @driver_data: array of driver_data pointers - * @retry_count: number of retries * @ampdu_ack_len: number of aggregated frames. * relevant only if IEEE80211_TX_STATUS_AMPDU was set. * @ampdu_ack_map: block ack bit map for the aggregation. diff --git a/include/net/sctp/checksum.h b/include/net/sctp/checksum.h index b799fb21519..2fec3c366e8 100644 --- a/include/net/sctp/checksum.h +++ b/include/net/sctp/checksum.h @@ -79,5 +79,5 @@ static inline __be32 sctp_update_cksum(__u8 *buffer, __u16 length, __be32 crc32) static inline __be32 sctp_end_cksum(__be32 crc32) { - return ~crc32; + return (__force __be32)~cpu_to_le32((__force u32)crc32); } diff --git a/include/sound/soc-dapm.h b/include/sound/soc-dapm.h index 93a4edb148b..dfa80495882 100644 --- a/include/sound/soc-dapm.h +++ b/include/sound/soc-dapm.h @@ -108,7 +108,7 @@ #define SND_SOC_DAPM_SWITCH_E(wname, wreg, wshift, winvert, wcontrols, \ wevent, wflags) \ { .id = snd_soc_dapm_switch, .name = wname, .reg = wreg, .shift = wshift, \ - .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1 \ + .invert = winvert, .kcontrols = wcontrols, .num_kcontrols = 1, \ .event = wevent, .event_flags = wflags} #define SND_SOC_DAPM_MUX_E(wname, wreg, wshift, winvert, wcontrols, \ wevent, wflags) \ diff --git a/init/Kconfig b/init/Kconfig index 2af83825634..f068071fcc5 100644 --- a/init/Kconfig +++ b/init/Kconfig @@ -238,6 +238,98 @@ config AUDIT_TREE def_bool y depends on AUDITSYSCALL && INOTIFY +menu "RCU Subsystem" + +choice + prompt "RCU Implementation" + default CLASSIC_RCU + +config CLASSIC_RCU + bool "Classic RCU" + help + This option selects the classic RCU implementation that is + designed for best read-side performance on non-realtime + systems. + + Select this option if you are unsure. + +config TREE_RCU + bool "Tree-based hierarchical RCU" + help + This option selects the RCU implementation that is + designed for very large SMP system with hundreds or + thousands of CPUs. + +config PREEMPT_RCU + bool "Preemptible RCU" + depends on PREEMPT + help + This option reduces the latency of the kernel by making certain + RCU sections preemptible. Normally RCU code is non-preemptible, if + this option is selected then read-only RCU sections become + preemptible. This helps latency, but may expose bugs due to + now-naive assumptions about each RCU read-side critical section + remaining on a given CPU through its execution. + +endchoice + +config RCU_TRACE + bool "Enable tracing for RCU" + depends on TREE_RCU || PREEMPT_RCU + help + This option provides tracing in RCU which presents stats + in debugfs for debugging RCU implementation. + + Say Y here if you want to enable RCU tracing + Say N if you are unsure. + +config RCU_FANOUT + int "Tree-based hierarchical RCU fanout value" + range 2 64 if 64BIT + range 2 32 if !64BIT + depends on TREE_RCU + default 64 if 64BIT + default 32 if !64BIT + help + This option controls the fanout of hierarchical implementations + of RCU, allowing RCU to work efficiently on machines with + large numbers of CPUs. This value must be at least the cube + root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit + systems and up to 262,144 for 64-bit systems. + + Select a specific number if testing RCU itself. + Take the default if unsure. + +config RCU_FANOUT_EXACT + bool "Disable tree-based hierarchical RCU auto-balancing" + depends on TREE_RCU + default n + help + This option forces use of the exact RCU_FANOUT value specified, + regardless of imbalances in the hierarchy. This is useful for + testing RCU itself, and might one day be useful on systems with + strong NUMA behavior. + + Without RCU_FANOUT_EXACT, the code will balance the hierarchy. + + Say N if unsure. + +config TREE_RCU_TRACE + def_bool RCU_TRACE && TREE_RCU + select DEBUG_FS + help + This option provides tracing for the TREE_RCU implementation, + permitting Makefile to trivially select kernel/rcutree_trace.c. + +config PREEMPT_RCU_TRACE + def_bool RCU_TRACE && PREEMPT_RCU + select DEBUG_FS + help + This option provides tracing for the PREEMPT_RCU implementation, + permitting Makefile to trivially select kernel/rcupreempt_trace.c. + +endmenu # "RCU Subsystem" + config IKCONFIG tristate "Kernel .config support" ---help--- @@ -541,6 +633,14 @@ config PID_NS Unless you want to work with an experimental feature say N here. +config NET_NS + bool "Network namespace" + default n + depends on NAMESPACES && EXPERIMENTAL && NET + help + Allow user space to create what appear to be multiple instances + of the network stack. + config BLK_DEV_INITRD bool "Initial RAM filesystem and RAM disk (initramfs/initrd) support" depends on BROKEN || !FRV @@ -625,13 +725,6 @@ config KALLSYMS_ALL Say N. -config KALLSYMS_STRIP_GENERATED - bool "Strip machine generated symbols from kallsyms" - depends on KALLSYMS_ALL - default y - help - Say N if you want kallsyms to retain even machine generated symbols. - config KALLSYMS_EXTRA_PASS bool "Do an extra kallsyms pass" depends on KALLSYMS @@ -972,90 +1065,3 @@ source "block/Kconfig" config PREEMPT_NOTIFIERS bool -choice - prompt "RCU Implementation" - default CLASSIC_RCU - -config CLASSIC_RCU - bool "Classic RCU" - help - This option selects the classic RCU implementation that is - designed for best read-side performance on non-realtime - systems. - - Select this option if you are unsure. - -config TREE_RCU - bool "Tree-based hierarchical RCU" - help - This option selects the RCU implementation that is - designed for very large SMP system with hundreds or - thousands of CPUs. - -config PREEMPT_RCU - bool "Preemptible RCU" - depends on PREEMPT - help - This option reduces the latency of the kernel by making certain - RCU sections preemptible. Normally RCU code is non-preemptible, if - this option is selected then read-only RCU sections become - preemptible. This helps latency, but may expose bugs due to - now-naive assumptions about each RCU read-side critical section - remaining on a given CPU through its execution. - -endchoice - -config RCU_TRACE - bool "Enable tracing for RCU" - depends on TREE_RCU || PREEMPT_RCU - help - This option provides tracing in RCU which presents stats - in debugfs for debugging RCU implementation. - - Say Y here if you want to enable RCU tracing - Say N if you are unsure. - -config RCU_FANOUT - int "Tree-based hierarchical RCU fanout value" - range 2 64 if 64BIT - range 2 32 if !64BIT - depends on TREE_RCU - default 64 if 64BIT - default 32 if !64BIT - help - This option controls the fanout of hierarchical implementations - of RCU, allowing RCU to work efficiently on machines with - large numbers of CPUs. This value must be at least the cube - root of NR_CPUS, which allows NR_CPUS up to 32,768 for 32-bit - systems and up to 262,144 for 64-bit systems. - - Select a specific number if testing RCU itself. - Take the default if unsure. - -config RCU_FANOUT_EXACT - bool "Disable tree-based hierarchical RCU auto-balancing" - depends on TREE_RCU - default n - help - This option forces use of the exact RCU_FANOUT value specified, - regardless of imbalances in the hierarchy. This is useful for - testing RCU itself, and might one day be useful on systems with - strong NUMA behavior. - - Without RCU_FANOUT_EXACT, the code will balance the hierarchy. - - Say N if unsure. - -config TREE_RCU_TRACE - def_bool RCU_TRACE && TREE_RCU - select DEBUG_FS - help - This option provides tracing for the TREE_RCU implementation, - permitting Makefile to trivially select kernel/rcutree_trace.c. - -config PREEMPT_RCU_TRACE - def_bool RCU_TRACE && PREEMPT_RCU - select DEBUG_FS - help - This option provides tracing for the PREEMPT_RCU implementation, - permitting Makefile to trivially select kernel/rcupreempt_trace.c. diff --git a/init/main.c b/init/main.c index 844209453c0..bfe4fb0c984 100644 --- a/init/main.c +++ b/init/main.c @@ -14,6 +14,7 @@ #include <linux/proc_fs.h> #include <linux/kernel.h> #include <linux/syscalls.h> +#include <linux/stackprotector.h> #include <linux/string.h> #include <linux/ctype.h> #include <linux/delay.h> @@ -539,6 +540,12 @@ asmlinkage void __init start_kernel(void) */ lockdep_init(); debug_objects_early_init(); + + /* + * Set up the the initial canary ASAP: + */ + boot_init_stack_canary(); + cgroup_init_early(); local_irq_disable(); diff --git a/kernel/dma-coherent.c b/kernel/dma-coherent.c index 038707404b7..962a3b574f2 100644 --- a/kernel/dma-coherent.c +++ b/kernel/dma-coherent.c @@ -98,7 +98,7 @@ EXPORT_SYMBOL(dma_mark_declared_memory_occupied); * @size: size of requested memory area * @dma_handle: This will be filled with the correct dma handle * @ret: This pointer will be filled with the virtual address - * to allocated area. + * to allocated area. * * This function should be only called from per-arch dma_alloc_coherent() * to support allocation from per-device coherent memory pools. @@ -118,31 +118,32 @@ int dma_alloc_from_coherent(struct device *dev, ssize_t size, mem = dev->dma_mem; if (!mem) return 0; - if (unlikely(size > mem->size)) - return 0; + + *ret = NULL; + + if (unlikely(size > (mem->size << PAGE_SHIFT))) + goto err; pageno = bitmap_find_free_region(mem->bitmap, mem->size, order); - if (pageno >= 0) { - /* - * Memory was found in the per-device arena. - */ - *dma_handle = mem->device_base + (pageno << PAGE_SHIFT); - *ret = mem->virt_base + (pageno << PAGE_SHIFT); - memset(*ret, 0, size); - } else if (mem->flags & DMA_MEMORY_EXCLUSIVE) { - /* - * The per-device arena is exhausted and we are not - * permitted to fall back to generic memory. - */ - *ret = NULL; - } else { - /* - * The per-device arena is exhausted and we are - * permitted to fall back to generic memory. - */ - return 0; - } + if (unlikely(pageno < 0)) + goto err; + + /* + * Memory was found in the per-device area. + */ + *dma_handle = mem->device_base + (pageno << PAGE_SHIFT); + *ret = mem->virt_base + (pageno << PAGE_SHIFT); + memset(*ret, 0, size); + return 1; + +err: + /* + * In the case where the allocation can not be satisfied from the + * per-device area, try to fall back to generic memory if the + * constraints allow it. + */ + return mem->flags & DMA_MEMORY_EXCLUSIVE; } EXPORT_SYMBOL(dma_alloc_from_coherent); diff --git a/kernel/exit.c b/kernel/exit.c index f80dec3f187..70612c19ac9 100644 --- a/kernel/exit.c +++ b/kernel/exit.c @@ -977,12 +977,9 @@ static void check_stack_usage(void) { static DEFINE_SPINLOCK(low_water_lock); static int lowest_to_date = THREAD_SIZE; - unsigned long *n = end_of_stack(current); unsigned long free; - while (*n == 0) - n++; - free = (unsigned long)n - (unsigned long)end_of_stack(current); + free = stack_not_used(current); if (free >= lowest_to_date) return; diff --git a/kernel/fork.c b/kernel/fork.c index bf0cef8bbdf..99309df985b 100644 --- a/kernel/fork.c +++ b/kernel/fork.c @@ -61,6 +61,7 @@ #include <linux/proc_fs.h> #include <linux/blkdev.h> #include <trace/sched.h> +#include <linux/magic.h> #include <asm/pgtable.h> #include <asm/pgalloc.h> @@ -212,6 +213,8 @@ static struct task_struct *dup_task_struct(struct task_struct *orig) { struct task_struct *tsk; struct thread_info *ti; + unsigned long *stackend; + int err; prepare_to_copy(orig); @@ -237,6 +240,8 @@ static struct task_struct *dup_task_struct(struct task_struct *orig) goto out; setup_thread_stack(tsk, orig); + stackend = end_of_stack(tsk); + *stackend = STACK_END_MAGIC; /* for overflow detection */ #ifdef CONFIG_CC_STACKPROTECTOR tsk->stack_canary = get_random_int(); @@ -817,17 +822,17 @@ static void posix_cpu_timers_init_group(struct signal_struct *sig) static int copy_signal(unsigned long clone_flags, struct task_struct *tsk) { struct signal_struct *sig; - int ret; if (clone_flags & CLONE_THREAD) { - ret = thread_group_cputime_clone_thread(current); - if (likely(!ret)) { - atomic_inc(¤t->signal->count); - atomic_inc(¤t->signal->live); - } - return ret; + atomic_inc(¤t->signal->count); + atomic_inc(¤t->signal->live); + return 0; } sig = kmem_cache_alloc(signal_cachep, GFP_KERNEL); + + if (sig) + posix_cpu_timers_init_group(sig); + tsk->signal = sig; if (!sig) return -ENOMEM; @@ -864,8 +869,6 @@ static int copy_signal(unsigned long clone_flags, struct task_struct *tsk) memcpy(sig->rlim, current->signal->rlim, sizeof sig->rlim); task_unlock(current->group_leader); - posix_cpu_timers_init_group(sig); - acct_init_pacct(&sig->pacct); tty_audit_fork(sig); diff --git a/kernel/hrtimer.c b/kernel/hrtimer.c index 2dc30c59c5f..f33afb0407b 100644 --- a/kernel/hrtimer.c +++ b/kernel/hrtimer.c @@ -614,7 +614,9 @@ void clock_was_set(void) */ void hres_timers_resume(void) { - /* Retrigger the CPU local events: */ + WARN_ONCE(!irqs_disabled(), + KERN_INFO "hres_timers_resume() called with IRQs enabled!"); + retrigger_next_event(NULL); } diff --git a/kernel/irq/chip.c b/kernel/irq/chip.c index f63c706d25e..c248eba98b4 100644 --- a/kernel/irq/chip.c +++ b/kernel/irq/chip.c @@ -46,7 +46,10 @@ void dynamic_irq_init(unsigned int irq) desc->irq_count = 0; desc->irqs_unhandled = 0; #ifdef CONFIG_SMP - cpumask_setall(&desc->affinity); + cpumask_setall(desc->affinity); +#ifdef CONFIG_GENERIC_PENDING_IRQ + cpumask_clear(desc->pending_mask); +#endif #endif spin_unlock_irqrestore(&desc->lock, flags); } diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c index c20db0be917..f51eaee921b 100644 --- a/kernel/irq/handle.c +++ b/kernel/irq/handle.c @@ -17,6 +17,7 @@ #include <linux/kernel_stat.h> #include <linux/rculist.h> #include <linux/hash.h> +#include <linux/bootmem.h> #include "internals.h" @@ -39,6 +40,18 @@ void handle_bad_irq(unsigned int irq, struct irq_desc *desc) ack_bad_irq(irq); } +#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS) +static void __init init_irq_default_affinity(void) +{ + alloc_bootmem_cpumask_var(&irq_default_affinity); + cpumask_setall(irq_default_affinity); +} +#else +static void __init init_irq_default_affinity(void) +{ +} +#endif + /* * Linux has a controller-independent interrupt architecture. * Every controller has a 'controller-template', that is used @@ -57,6 +70,7 @@ int nr_irqs = NR_IRQS; EXPORT_SYMBOL_GPL(nr_irqs); #ifdef CONFIG_SPARSE_IRQ + static struct irq_desc irq_desc_init = { .irq = -1, .status = IRQ_DISABLED, @@ -64,9 +78,6 @@ static struct irq_desc irq_desc_init = { .handle_irq = handle_bad_irq, .depth = 1, .lock = __SPIN_LOCK_UNLOCKED(irq_desc_init.lock), -#ifdef CONFIG_SMP - .affinity = CPU_MASK_ALL -#endif }; void init_kstat_irqs(struct irq_desc *desc, int cpu, int nr) @@ -101,6 +112,10 @@ static void init_one_irq_desc(int irq, struct irq_desc *desc, int cpu) printk(KERN_ERR "can not alloc kstat_irqs\n"); BUG_ON(1); } + if (!init_alloc_desc_masks(desc, cpu, false)) { + printk(KERN_ERR "can not alloc irq_desc cpumasks\n"); + BUG_ON(1); + } arch_init_chip_data(desc, cpu); } @@ -109,7 +124,7 @@ static void init_one_irq_desc(int irq, struct irq_desc *desc, int cpu) */ DEFINE_SPINLOCK(sparse_irq_lock); -struct irq_desc *irq_desc_ptrs[NR_IRQS] __read_mostly; +struct irq_desc **irq_desc_ptrs __read_mostly; static struct irq_desc irq_desc_legacy[NR_IRQS_LEGACY] __cacheline_aligned_in_smp = { [0 ... NR_IRQS_LEGACY-1] = { @@ -119,14 +134,10 @@ static struct irq_desc irq_desc_legacy[NR_IRQS_LEGACY] __cacheline_aligned_in_sm .handle_irq = handle_bad_irq, .depth = 1, .lock = __SPIN_LOCK_UNLOCKED(irq_desc_init.lock), -#ifdef CONFIG_SMP - .affinity = CPU_MASK_ALL -#endif } }; -/* FIXME: use bootmem alloc ...*/ -static unsigned int kstat_irqs_legacy[NR_IRQS_LEGACY][NR_CPUS]; +static unsigned int *kstat_irqs_legacy; int __init early_irq_init(void) { @@ -134,18 +145,32 @@ int __init early_irq_init(void) int legacy_count; int i; + init_irq_default_affinity(); + + /* initialize nr_irqs based on nr_cpu_ids */ + arch_probe_nr_irqs(); + printk(KERN_INFO "NR_IRQS:%d nr_irqs:%d\n", NR_IRQS, nr_irqs); + desc = irq_desc_legacy; legacy_count = ARRAY_SIZE(irq_desc_legacy); + /* allocate irq_desc_ptrs array based on nr_irqs */ + irq_desc_ptrs = alloc_bootmem(nr_irqs * sizeof(void *)); + + /* allocate based on nr_cpu_ids */ + /* FIXME: invert kstat_irgs, and it'd be a per_cpu_alloc'd thing */ + kstat_irqs_legacy = alloc_bootmem(NR_IRQS_LEGACY * nr_cpu_ids * + sizeof(int)); + for (i = 0; i < legacy_count; i++) { desc[i].irq = i; - desc[i].kstat_irqs = kstat_irqs_legacy[i]; + desc[i].kstat_irqs = kstat_irqs_legacy + i * nr_cpu_ids; lockdep_set_class(&desc[i].lock, &irq_desc_lock_class); - + init_alloc_desc_masks(&desc[i], 0, true); irq_desc_ptrs[i] = desc + i; } - for (i = legacy_count; i < NR_IRQS; i++) + for (i = legacy_count; i < nr_irqs; i++) irq_desc_ptrs[i] = NULL; return arch_early_irq_init(); @@ -153,7 +178,10 @@ int __init early_irq_init(void) struct irq_desc *irq_to_desc(unsigned int irq) { - return (irq < NR_IRQS) ? irq_desc_ptrs[irq] : NULL; + if (irq_desc_ptrs && irq < nr_irqs) + return irq_desc_ptrs[irq]; + + return NULL; } struct irq_desc *irq_to_desc_alloc_cpu(unsigned int irq, int cpu) @@ -162,10 +190,9 @@ struct irq_desc *irq_to_desc_alloc_cpu(unsigned int irq, int cpu) unsigned long flags; int node; - if (irq >= NR_IRQS) { - printk(KERN_WARNING "irq >= NR_IRQS in irq_to_desc_alloc: %d %d\n", - irq, NR_IRQS); - WARN_ON(1); + if (irq >= nr_irqs) { + WARN(1, "irq (%d) >= nr_irqs (%d) in irq_to_desc_alloc\n", + irq, nr_irqs); return NULL; } @@ -207,9 +234,6 @@ struct irq_desc irq_desc[NR_IRQS] __cacheline_aligned_in_smp = { .handle_irq = handle_bad_irq, .depth = 1, .lock = __SPIN_LOCK_UNLOCKED(irq_desc->lock), -#ifdef CONFIG_SMP - .affinity = CPU_MASK_ALL -#endif } }; @@ -219,12 +243,17 @@ int __init early_irq_init(void) int count; int i; + init_irq_default_affinity(); + + printk(KERN_INFO "NR_IRQS:%d\n", NR_IRQS); + desc = irq_desc; count = ARRAY_SIZE(irq_desc); - for (i = 0; i < count; i++) + for (i = 0; i < count; i++) { desc[i].irq = i; - + init_alloc_desc_masks(&desc[i], 0, true); + } return arch_early_irq_init(); } diff --git a/kernel/irq/internals.h b/kernel/irq/internals.h index e6d0a43cc12..40416a81a0f 100644 --- a/kernel/irq/internals.h +++ b/kernel/irq/internals.h @@ -16,7 +16,14 @@ extern int __irq_set_trigger(struct irq_desc *desc, unsigned int irq, extern struct lock_class_key irq_desc_lock_class; extern void init_kstat_irqs(struct irq_desc *desc, int cpu, int nr); extern spinlock_t sparse_irq_lock; + +#ifdef CONFIG_SPARSE_IRQ +/* irq_desc_ptrs allocated at boot time */ +extern struct irq_desc **irq_desc_ptrs; +#else +/* irq_desc_ptrs is a fixed size array */ extern struct irq_desc *irq_desc_ptrs[NR_IRQS]; +#endif #ifdef CONFIG_PROC_FS extern void register_irq_proc(unsigned int irq, struct irq_desc *desc); diff --git a/kernel/irq/manage.c b/kernel/irq/manage.c index cd0cd8dcb34..a3a5dc9ef34 100644 --- a/kernel/irq/manage.c +++ b/kernel/irq/manage.c @@ -15,17 +15,9 @@ #include "internals.h" -#ifdef CONFIG_SMP +#if defined(CONFIG_SMP) && defined(CONFIG_GENERIC_HARDIRQS) cpumask_var_t irq_default_affinity; -static int init_irq_default_affinity(void) -{ - alloc_cpumask_var(&irq_default_affinity, GFP_KERNEL); - cpumask_setall(irq_default_affinity); - return 0; -} -core_initcall(init_irq_default_affinity); - /** * synchronize_irq - wait for pending IRQ handlers (on other CPUs) * @irq: interrupt number to wait for @@ -98,14 +90,14 @@ int irq_set_affinity(unsigned int irq, const struct cpumask *cpumask) #ifdef CONFIG_GENERIC_PENDING_IRQ if (desc->status & IRQ_MOVE_PCNTXT || desc->status & IRQ_DISABLED) { - cpumask_copy(&desc->affinity, cpumask); + cpumask_copy(desc->affinity, cpumask); desc->chip->set_affinity(irq, cpumask); } else { desc->status |= IRQ_MOVE_PENDING; - cpumask_copy(&desc->pending_mask, cpumask); + cpumask_copy(desc->pending_mask, cpumask); } #else - cpumask_copy(&desc->affinity, cpumask); + cpumask_copy(desc->affinity, cpumask); desc->chip->set_affinity(irq, cpumask); #endif desc->status |= IRQ_AFFINITY_SET; @@ -127,16 +119,16 @@ int do_irq_select_affinity(unsigned int irq, struct irq_desc *desc) * one of the targets is online. */ if (desc->status & (IRQ_AFFINITY_SET | IRQ_NO_BALANCING)) { - if (cpumask_any_and(&desc->affinity, cpu_online_mask) + if (cpumask_any_and(desc->affinity, cpu_online_mask) < nr_cpu_ids) goto set_affinity; else desc->status &= ~IRQ_AFFINITY_SET; } - cpumask_and(&desc->affinity, cpu_online_mask, irq_default_affinity); + cpumask_and(desc->affinity, cpu_online_mask, irq_default_affinity); set_affinity: - desc->chip->set_affinity(irq, &desc->affinity); + desc->chip->set_affinity(irq, desc->affinity); return 0; } diff --git a/kernel/irq/migration.c b/kernel/irq/migration.c index bd72329e630..e05ad9be43b 100644 --- a/kernel/irq/migration.c +++ b/kernel/irq/migration.c @@ -18,7 +18,7 @@ void move_masked_irq(int irq) desc->status &= ~IRQ_MOVE_PENDING; - if (unlikely(cpumask_empty(&desc->pending_mask))) + if (unlikely(cpumask_empty(desc->pending_mask))) return; if (!desc->chip->set_affinity) @@ -38,13 +38,13 @@ void move_masked_irq(int irq) * For correct operation this depends on the caller * masking the irqs. */ - if (likely(cpumask_any_and(&desc->pending_mask, cpu_online_mask) + if (likely(cpumask_any_and(desc->pending_mask, cpu_online_mask) < nr_cpu_ids)) { - cpumask_and(&desc->affinity, - &desc->pending_mask, cpu_online_mask); - desc->chip->set_affinity(irq, &desc->affinity); + cpumask_and(desc->affinity, + desc->pending_mask, cpu_online_mask); + desc->chip->set_affinity(irq, desc->affinity); } - cpumask_clear(&desc->pending_mask); + cpumask_clear(desc->pending_mask); } void move_native_irq(int irq) diff --git a/kernel/irq/numa_migrate.c b/kernel/irq/numa_migrate.c index ecf765c6a77..666260e4c06 100644 --- a/kernel/irq/numa_migrate.c +++ b/kernel/irq/numa_migrate.c @@ -38,15 +38,22 @@ static void free_kstat_irqs(struct irq_desc *old_desc, struct irq_desc *desc) old_desc->kstat_irqs = NULL; } -static void init_copy_one_irq_desc(int irq, struct irq_desc *old_desc, +static bool init_copy_one_irq_desc(int irq, struct irq_desc *old_desc, struct irq_desc *desc, int cpu) { memcpy(desc, old_desc, sizeof(struct irq_desc)); + if (!init_alloc_desc_masks(desc, cpu, false)) { + printk(KERN_ERR "irq %d: can not get new irq_desc cpumask " + "for migration.\n", irq); + return false; + } spin_lock_init(&desc->lock); desc->cpu = cpu; lockdep_set_class(&desc->lock, &irq_desc_lock_class); init_copy_kstat_irqs(old_desc, desc, cpu, nr_cpu_ids); + init_copy_desc_masks(old_desc, desc); arch_init_copy_chip_data(old_desc, desc, cpu); + return true; } static void free_one_irq_desc(struct irq_desc *old_desc, struct irq_desc *desc) @@ -76,12 +83,18 @@ static struct irq_desc *__real_move_irq_desc(struct irq_desc *old_desc, node = cpu_to_node(cpu); desc = kzalloc_node(sizeof(*desc), GFP_ATOMIC, node); if (!desc) { - printk(KERN_ERR "irq %d: can not get new irq_desc for migration.\n", irq); + printk(KERN_ERR "irq %d: can not get new irq_desc " + "for migration.\n", irq); + /* still use old one */ + desc = old_desc; + goto out_unlock; + } + if (!init_copy_one_irq_desc(irq, old_desc, desc, cpu)) { /* still use old one */ + kfree(desc); desc = old_desc; goto out_unlock; } - init_copy_one_irq_desc(irq, old_desc, desc, cpu); irq_desc_ptrs[irq] = desc; diff --git a/kernel/irq/proc.c b/kernel/irq/proc.c index aae3f742bce..692363dd591 100644 --- a/kernel/irq/proc.c +++ b/kernel/irq/proc.c @@ -20,11 +20,11 @@ static struct proc_dir_entry *root_irq_dir; static int irq_affinity_proc_show(struct seq_file *m, void *v) { struct irq_desc *desc = irq_to_desc((long)m->private); - const struct cpumask *mask = &desc->affinity; + const struct cpumask *mask = desc->affinity; #ifdef CONFIG_GENERIC_PENDING_IRQ if (desc->status & IRQ_MOVE_PENDING) - mask = &desc->pending_mask; + mask = desc->pending_mask; #endif seq_cpumask(m, mask); seq_putc(m, '\n'); diff --git a/kernel/kallsyms.c b/kernel/kallsyms.c index e694afa0eb8..7b8b0f21a5b 100644 --- a/kernel/kallsyms.c +++ b/kernel/kallsyms.c @@ -30,19 +30,20 @@ #define all_var 0 #endif -extern const unsigned long kallsyms_addresses[]; -extern const u8 kallsyms_names[]; +/* These will be re-linked against their real values during the second link stage */ +extern const unsigned long kallsyms_addresses[] __attribute__((weak)); +extern const u8 kallsyms_names[] __attribute__((weak)); /* tell the compiler that the count isn't in the small data section if the arch * has one (eg: FRV) */ extern const unsigned long kallsyms_num_syms - __attribute__((__section__(".rodata"))); +__attribute__((weak, section(".rodata"))); -extern const u8 kallsyms_token_table[]; -extern const u16 kallsyms_token_index[]; +extern const u8 kallsyms_token_table[] __attribute__((weak)); +extern const u16 kallsyms_token_index[] __attribute__((weak)); -extern const unsigned long kallsyms_markers[]; +extern const unsigned long kallsyms_markers[] __attribute__((weak)); static inline int is_kernel_inittext(unsigned long addr) { @@ -167,6 +168,9 @@ static unsigned long get_symbol_pos(unsigned long addr, unsigned long symbol_start = 0, symbol_end = 0; unsigned long i, low, high, mid; + /* This kernel should never had been booted. */ + BUG_ON(!kallsyms_addresses); + /* do a binary search on the sorted kallsyms_addresses array */ low = 0; high = kallsyms_num_syms; diff --git a/kernel/panic.c b/kernel/panic.c index 2a2ff36ff44..33cab3de176 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -74,6 +74,9 @@ NORET_TYPE void panic(const char * fmt, ...) vsnprintf(buf, sizeof(buf), fmt, args); va_end(args); printk(KERN_EMERG "Kernel panic - not syncing: %s\n",buf); +#ifdef CONFIG_DEBUG_BUGVERBOSE + dump_stack(); +#endif bust_spinlocks(0); /* @@ -355,15 +358,22 @@ EXPORT_SYMBOL(warn_slowpath); #endif #ifdef CONFIG_CC_STACKPROTECTOR + +#ifndef GCC_HAS_SP +#warning You have selected the CONFIG_CC_STACKPROTECTOR option, but the gcc used does not support this. +#endif + /* * Called when gcc's -fstack-protector feature is used, and * gcc detects corruption of the on-stack canary value */ void __stack_chk_fail(void) { - panic("stack-protector: Kernel stack is corrupted"); + panic("stack-protector: Kernel stack is corrupted in: %p\n", + __builtin_return_address(0)); } EXPORT_SYMBOL(__stack_chk_fail); + #endif core_param(panic, panic_timeout, int, 0644); diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index 157de3a4783..fa07da94d7b 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -10,76 +10,6 @@ #include <linux/kernel_stat.h> /* - * Allocate the thread_group_cputime structure appropriately and fill in the - * current values of the fields. Called from copy_signal() via - * thread_group_cputime_clone_thread() when adding a second or subsequent - * thread to a thread group. Assumes interrupts are enabled when called. - */ -int thread_group_cputime_alloc(struct task_struct *tsk) -{ - struct signal_struct *sig = tsk->signal; - struct task_cputime *cputime; - - /* - * If we have multiple threads and we don't already have a - * per-CPU task_cputime struct (checked in the caller), allocate - * one and fill it in with the times accumulated so far. We may - * race with another thread so recheck after we pick up the sighand - * lock. - */ - cputime = alloc_percpu(struct task_cputime); - if (cputime == NULL) - return -ENOMEM; - spin_lock_irq(&tsk->sighand->siglock); - if (sig->cputime.totals) { - spin_unlock_irq(&tsk->sighand->siglock); - free_percpu(cputime); - return 0; - } - sig->cputime.totals = cputime; - cputime = per_cpu_ptr(sig->cputime.totals, smp_processor_id()); - cputime->utime = tsk->utime; - cputime->stime = tsk->stime; - cputime->sum_exec_runtime = tsk->se.sum_exec_runtime; - spin_unlock_irq(&tsk->sighand->siglock); - return 0; -} - -/** - * thread_group_cputime - Sum the thread group time fields across all CPUs. - * - * @tsk: The task we use to identify the thread group. - * @times: task_cputime structure in which we return the summed fields. - * - * Walk the list of CPUs to sum the per-CPU time fields in the thread group - * time structure. - */ -void thread_group_cputime( - struct task_struct *tsk, - struct task_cputime *times) -{ - struct task_cputime *totals, *tot; - int i; - - totals = tsk->signal->cputime.totals; - if (!totals) { - times->utime = tsk->utime; - times->stime = tsk->stime; - times->sum_exec_runtime = tsk->se.sum_exec_runtime; - return; - } - - times->stime = times->utime = cputime_zero; - times->sum_exec_runtime = 0; - for_each_possible_cpu(i) { - tot = per_cpu_ptr(totals, i); - times->utime = cputime_add(times->utime, tot->utime); - times->stime = cputime_add(times->stime, tot->stime); - times->sum_exec_runtime += tot->sum_exec_runtime; - } -} - -/* * Called after updating RLIMIT_CPU to set timer expiration if necessary. */ void update_rlimit_cpu(unsigned long rlim_new) diff --git a/kernel/power/disk.c b/kernel/power/disk.c index 45e8541ab7e..432ee575c9e 100644 --- a/kernel/power/disk.c +++ b/kernel/power/disk.c @@ -71,6 +71,14 @@ void hibernation_set_ops(struct platform_hibernation_ops *ops) mutex_unlock(&pm_mutex); } +static bool entering_platform_hibernation; + +bool system_entering_hibernation(void) +{ + return entering_platform_hibernation; +} +EXPORT_SYMBOL(system_entering_hibernation); + #ifdef CONFIG_PM_DEBUG static void hibernation_debug_sleep(void) { @@ -411,6 +419,7 @@ int hibernation_platform_enter(void) if (error) goto Close; + entering_platform_hibernation = true; suspend_console(); error = device_suspend(PMSG_HIBERNATE); if (error) { @@ -445,6 +454,7 @@ int hibernation_platform_enter(void) Finish: hibernation_ops->finish(); Resume_devices: + entering_platform_hibernation = false; device_resume(PMSG_RESTORE); resume_console(); Close: diff --git a/kernel/rcuclassic.c b/kernel/rcuclassic.c index 490934fc7ac..bd5a9003497 100644 --- a/kernel/rcuclassic.c +++ b/kernel/rcuclassic.c @@ -716,7 +716,7 @@ void rcu_check_callbacks(int cpu, int user) raise_rcu_softirq(); } -static void rcu_init_percpu_data(int cpu, struct rcu_ctrlblk *rcp, +static void __cpuinit rcu_init_percpu_data(int cpu, struct rcu_ctrlblk *rcp, struct rcu_data *rdp) { unsigned long flags; diff --git a/kernel/rcutree.c b/kernel/rcutree.c index f2d8638e6c6..b2fd602a6f6 100644 --- a/kernel/rcutree.c +++ b/kernel/rcutree.c @@ -1314,7 +1314,7 @@ int rcu_needs_cpu(int cpu) * access due to the fact that this CPU cannot possibly have any RCU * callbacks in flight yet. */ -static void +static void __cpuinit rcu_init_percpu_data(int cpu, struct rcu_state *rsp) { unsigned long flags; diff --git a/kernel/relay.c b/kernel/relay.c index 09ac2008f77..9d79b7854fa 100644 --- a/kernel/relay.c +++ b/kernel/relay.c @@ -663,8 +663,10 @@ int relay_late_setup_files(struct rchan *chan, mutex_lock(&relay_channels_mutex); /* Is chan already set up? */ - if (unlikely(chan->has_base_filename)) + if (unlikely(chan->has_base_filename)) { + mutex_unlock(&relay_channels_mutex); return -EEXIST; + } chan->has_base_filename = 1; chan->parent = parent; curr_cpu = get_cpu(); diff --git a/kernel/sched.c b/kernel/sched.c index 52bbf1c842a..c71d7d501ed 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -5939,12 +5939,7 @@ void sched_show_task(struct task_struct *p) printk(KERN_CONT " %016lx ", thread_saved_pc(p)); #endif #ifdef CONFIG_DEBUG_STACK_USAGE - { - unsigned long *n = end_of_stack(p); - while (!*n) - n++; - free = (unsigned long)n - (unsigned long)end_of_stack(p); - } + free = stack_not_used(p); #endif printk(KERN_CONT "%5lu %5d %6d\n", free, task_pid_nr(p), task_pid_nr(p->real_parent)); diff --git a/kernel/sched_rt.c b/kernel/sched_rt.c index 954e1a81b79..da932f4c852 100644 --- a/kernel/sched_rt.c +++ b/kernel/sched_rt.c @@ -960,16 +960,17 @@ static struct task_struct *pick_next_highest_task_rt(struct rq *rq, int cpu) static DEFINE_PER_CPU(cpumask_var_t, local_cpu_mask); -static inline int pick_optimal_cpu(int this_cpu, cpumask_t *mask) +static inline int pick_optimal_cpu(int this_cpu, + const struct cpumask *mask) { int first; /* "this_cpu" is cheaper to preempt than a remote processor */ - if ((this_cpu != -1) && cpu_isset(this_cpu, *mask)) + if ((this_cpu != -1) && cpumask_test_cpu(this_cpu, mask)) return this_cpu; - first = first_cpu(*mask); - if (first != NR_CPUS) + first = cpumask_first(mask); + if (first < nr_cpu_ids) return first; return -1; @@ -981,6 +982,7 @@ static int find_lowest_rq(struct task_struct *task) struct cpumask *lowest_mask = __get_cpu_var(local_cpu_mask); int this_cpu = smp_processor_id(); int cpu = task_cpu(task); + cpumask_var_t domain_mask; if (task->rt.nr_cpus_allowed == 1) return -1; /* No other targets possible */ @@ -1013,19 +1015,25 @@ static int find_lowest_rq(struct task_struct *task) if (this_cpu == cpu) this_cpu = -1; /* Skip this_cpu opt if the same */ - for_each_domain(cpu, sd) { - if (sd->flags & SD_WAKE_AFFINE) { - cpumask_t domain_mask; - int best_cpu; + if (alloc_cpumask_var(&domain_mask, GFP_ATOMIC)) { + for_each_domain(cpu, sd) { + if (sd->flags & SD_WAKE_AFFINE) { + int best_cpu; - cpumask_and(&domain_mask, sched_domain_span(sd), - lowest_mask); + cpumask_and(domain_mask, + sched_domain_span(sd), + lowest_mask); - best_cpu = pick_optimal_cpu(this_cpu, - &domain_mask); - if (best_cpu != -1) - return best_cpu; + best_cpu = pick_optimal_cpu(this_cpu, + domain_mask); + + if (best_cpu != -1) { + free_cpumask_var(domain_mask); + return best_cpu; + } + } } + free_cpumask_var(domain_mask); } /* diff --git a/kernel/sched_stats.h b/kernel/sched_stats.h index f2773b5d122..8ab0cef8eca 100644 --- a/kernel/sched_stats.h +++ b/kernel/sched_stats.h @@ -296,6 +296,7 @@ sched_info_switch(struct task_struct *prev, struct task_struct *next) static inline void account_group_user_time(struct task_struct *tsk, cputime_t cputime) { + struct task_cputime *times; struct signal_struct *sig; /* tsk == current, ensure it is safe to use ->signal */ @@ -303,13 +304,11 @@ static inline void account_group_user_time(struct task_struct *tsk, return; sig = tsk->signal; - if (sig->cputime.totals) { - struct task_cputime *times; + times = &sig->cputime.totals; - times = per_cpu_ptr(sig->cputime.totals, get_cpu()); - times->utime = cputime_add(times->utime, cputime); - put_cpu_no_resched(); - } + spin_lock(×->lock); + times->utime = cputime_add(times->utime, cputime); + spin_unlock(×->lock); } /** @@ -325,6 +324,7 @@ static inline void account_group_user_time(struct task_struct *tsk, static inline void account_group_system_time(struct task_struct *tsk, cputime_t cputime) { + struct task_cputime *times; struct signal_struct *sig; /* tsk == current, ensure it is safe to use ->signal */ @@ -332,13 +332,11 @@ static inline void account_group_system_time(struct task_struct *tsk, return; sig = tsk->signal; - if (sig->cputime.totals) { - struct task_cputime *times; + times = &sig->cputime.totals; - times = per_cpu_ptr(sig->cputime.totals, get_cpu()); - times->stime = cputime_add(times->stime, cputime); - put_cpu_no_resched(); - } + spin_lock(×->lock); + times->stime = cputime_add(times->stime, cputime); + spin_unlock(×->lock); } /** @@ -354,6 +352,7 @@ static inline void account_group_system_time(struct task_struct *tsk, static inline void account_group_exec_runtime(struct task_struct *tsk, unsigned long long ns) { + struct task_cputime *times; struct signal_struct *sig; sig = tsk->signal; @@ -362,11 +361,9 @@ static inline void account_group_exec_runtime(struct task_struct *tsk, if (unlikely(!sig)) return; - if (sig->cputime.totals) { - struct task_cputime *times; + times = &sig->cputime.totals; - times = per_cpu_ptr(sig->cputime.totals, get_cpu()); - times->sum_exec_runtime += ns; - put_cpu_no_resched(); - } + spin_lock(×->lock); + times->sum_exec_runtime += ns; + spin_unlock(×->lock); } diff --git a/kernel/softirq.c b/kernel/softirq.c index bdbe9de9cd8..0365b4899a3 100644 --- a/kernel/softirq.c +++ b/kernel/softirq.c @@ -795,6 +795,11 @@ int __init __weak early_irq_init(void) return 0; } +int __init __weak arch_probe_nr_irqs(void) +{ + return 0; +} + int __init __weak arch_early_irq_init(void) { return 0; diff --git a/kernel/softlockup.c b/kernel/softlockup.c index d9188c66278..85d5a245510 100644 --- a/kernel/softlockup.c +++ b/kernel/softlockup.c @@ -16,6 +16,7 @@ #include <linux/lockdep.h> #include <linux/notifier.h> #include <linux/module.h> +#include <linux/sysctl.h> #include <asm/irq_regs.h> @@ -88,6 +89,14 @@ void touch_all_softlockup_watchdogs(void) } EXPORT_SYMBOL(touch_all_softlockup_watchdogs); +int proc_dosoftlockup_thresh(struct ctl_table *table, int write, + struct file *filp, void __user *buffer, + size_t *lenp, loff_t *ppos) +{ + touch_all_softlockup_watchdogs(); + return proc_dointvec_minmax(table, write, filp, buffer, lenp, ppos); +} + /* * This callback runs from the timer interrupt, and checks * whether the watchdog thread has hung or not: diff --git a/kernel/sysctl.c b/kernel/sysctl.c index 368d1638ee7..790f9d78566 100644 --- a/kernel/sysctl.c +++ b/kernel/sysctl.c @@ -809,7 +809,7 @@ static struct ctl_table kern_table[] = { .data = &softlockup_thresh, .maxlen = sizeof(int), .mode = 0644, - .proc_handler = &proc_dointvec_minmax, + .proc_handler = &proc_dosoftlockup_thresh, .strategy = &sysctl_intvec, .extra1 = &neg_one, .extra2 = &sixty, diff --git a/kernel/time/tick-sched.c b/kernel/time/tick-sched.c index 1b6c05bd0d0..d3f1ef4d5cb 100644 --- a/kernel/time/tick-sched.c +++ b/kernel/time/tick-sched.c @@ -134,7 +134,7 @@ __setup("nohz=", setup_tick_nohz); * value. We do this unconditionally on any cpu, as we don't know whether the * cpu, which has the update task assigned is in a long sleep. */ -void tick_nohz_update_jiffies(void) +static void tick_nohz_update_jiffies(void) { int cpu = smp_processor_id(); struct tick_sched *ts = &per_cpu(tick_cpu_sched, cpu); diff --git a/kernel/workqueue.c b/kernel/workqueue.c index 2f445833ae3..1f0c509b40d 100644 --- a/kernel/workqueue.c +++ b/kernel/workqueue.c @@ -971,6 +971,8 @@ undo: } #ifdef CONFIG_SMP +static struct workqueue_struct *work_on_cpu_wq __read_mostly; + struct work_for_cpu { struct work_struct work; long (*fn)(void *); @@ -991,8 +993,8 @@ static void do_work_for_cpu(struct work_struct *w) * @fn: the function to run * @arg: the function arg * - * This will return -EINVAL in the cpu is not online, or the return value - * of @fn otherwise. + * This will return the value @fn returns. + * It is up to the caller to ensure that the cpu doesn't go offline. */ long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg) { @@ -1001,14 +1003,8 @@ long work_on_cpu(unsigned int cpu, long (*fn)(void *), void *arg) INIT_WORK(&wfc.work, do_work_for_cpu); wfc.fn = fn; wfc.arg = arg; - get_online_cpus(); - if (unlikely(!cpu_online(cpu))) - wfc.ret = -EINVAL; - else { - schedule_work_on(cpu, &wfc.work); - flush_work(&wfc.work); - } - put_online_cpus(); + queue_work_on(cpu, work_on_cpu_wq, &wfc.work); + flush_work(&wfc.work); return wfc.ret; } @@ -1025,4 +1021,8 @@ void __init init_workqueues(void) hotcpu_notifier(workqueue_cpu_callback, 0); keventd_wq = create_workqueue("events"); BUG_ON(!keventd_wq); +#ifdef CONFIG_SMP + work_on_cpu_wq = create_workqueue("work_on_cpu"); + BUG_ON(!work_on_cpu_wq); +#endif } diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 4c9ae6085c7..29044f50026 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -570,6 +570,15 @@ config DEBUG_NOTIFIERS This is a relatively cheap check but if you care about maximum performance, say N. +# +# Select this config option from the architecture Kconfig, if it +# it is preferred to always offer frame pointers as a config +# option on the architecture (regardless of KERNEL_DEBUG): +# +config ARCH_WANT_FRAME_POINTERS + bool + help + config FRAME_POINTER bool "Compile the kernel with frame pointers" depends on DEBUG_KERNEL && \ @@ -633,19 +642,6 @@ config RCU_TORTURE_TEST_RUNNABLE config RCU_CPU_STALL_DETECTOR bool "Check for stalled CPUs delaying RCU grace periods" - depends on CLASSIC_RCU - default n - help - This option causes RCU to printk information on which - CPUs are delaying the current grace period, but only when - the grace period extends for excessive time periods. - - Say Y if you want RCU to perform such checks. - - Say N if you are unsure. - -config RCU_CPU_STALL_DETECTOR - bool "Check for stalled CPUs delaying RCU grace periods" depends on CLASSIC_RCU || TREE_RCU default n help diff --git a/lib/smp_processor_id.c b/lib/smp_processor_id.c index 0f8fc22ed10..4689cb073da 100644 --- a/lib/smp_processor_id.c +++ b/lib/smp_processor_id.c @@ -22,7 +22,7 @@ notrace unsigned int debug_smp_processor_id(void) * Kernel threads bound to a single CPU can safely use * smp_processor_id(): */ - if (cpus_equal(current->cpus_allowed, cpumask_of_cpu(this_cpu))) + if (cpumask_equal(¤t->cpus_allowed, cpumask_of(this_cpu))) goto out; /* diff --git a/mm/nommu.c b/mm/nommu.c index 8cee8c8ff0f..2fcf47d449b 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -10,7 +10,7 @@ * Copyright (c) 2000-2003 David McCullough <davidm@snapgear.com> * Copyright (c) 2000-2001 D Jeff Dionne <jeff@uClinux.org> * Copyright (c) 2002 Greg Ungerer <gerg@snapgear.com> - * Copyright (c) 2007-2008 Paul Mundt <lethal@linux-sh.org> + * Copyright (c) 2007-2009 Paul Mundt <lethal@linux-sh.org> */ #include <linux/module.h> @@ -394,6 +394,24 @@ void vunmap(const void *addr) } EXPORT_SYMBOL(vunmap); +void *vm_map_ram(struct page **pages, unsigned int count, int node, pgprot_t prot) +{ + BUG(); + return NULL; +} +EXPORT_SYMBOL(vm_map_ram); + +void vm_unmap_ram(const void *mem, unsigned int count) +{ + BUG(); +} +EXPORT_SYMBOL(vm_unmap_ram); + +void vm_unmap_aliases(void) +{ +} +EXPORT_SYMBOL_GPL(vm_unmap_aliases); + /* * Implement a stub for vmalloc_sync_all() if the architecture chose not to * have one. @@ -1143,8 +1161,8 @@ error_free: return ret; enomem: - printk("Allocation of length %lu from process %d failed\n", - len, current->pid); + printk("Allocation of length %lu from process %d (%s) failed\n", + len, current->pid, current->comm); show_free_areas(); return -ENOMEM; } diff --git a/net/8021q/vlan_core.c b/net/8021q/vlan_core.c index 6c132394026..e9db889d622 100644 --- a/net/8021q/vlan_core.c +++ b/net/8021q/vlan_core.c @@ -62,13 +62,13 @@ struct net_device *vlan_dev_real_dev(const struct net_device *dev) { return vlan_dev_info(dev)->real_dev; } -EXPORT_SYMBOL_GPL(vlan_dev_real_dev); +EXPORT_SYMBOL(vlan_dev_real_dev); u16 vlan_dev_vlan_id(const struct net_device *dev) { return vlan_dev_info(dev)->vlan_id; } -EXPORT_SYMBOL_GPL(vlan_dev_vlan_id); +EXPORT_SYMBOL(vlan_dev_vlan_id); static int vlan_gro_common(struct napi_struct *napi, struct vlan_group *grp, unsigned int vlan_tci, struct sk_buff *skb) diff --git a/net/9p/client.c b/net/9p/client.c index 821f1ec0b2c..1eb580c38fb 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -618,7 +618,7 @@ static struct p9_fid *p9_fid_create(struct p9_client *clnt) return ERR_PTR(-ENOMEM); ret = p9_idpool_get(clnt->fidpool); - if (fid->fid < 0) { + if (ret < 0) { ret = -ENOSPC; goto error; } diff --git a/net/Kconfig b/net/Kconfig index bf2776018f7..cdb8fdef6c4 100644 --- a/net/Kconfig +++ b/net/Kconfig @@ -24,14 +24,6 @@ if NET menu "Networking options" -config NET_NS - bool "Network namespace support" - default n - depends on EXPERIMENTAL && NAMESPACES - help - Allow user space to create what appear to be multiple instances - of the network stack. - config COMPAT_NET_DEV_OPS def_bool y diff --git a/net/core/dev.c b/net/core/dev.c index 8d675975d85..5379b0c1190 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1534,7 +1534,19 @@ struct sk_buff *skb_gso_segment(struct sk_buff *skb, int features) skb->mac_len = skb->network_header - skb->mac_header; __skb_pull(skb, skb->mac_len); - if (WARN_ON(skb->ip_summed != CHECKSUM_PARTIAL)) { + if (unlikely(skb->ip_summed != CHECKSUM_PARTIAL)) { + struct net_device *dev = skb->dev; + struct ethtool_drvinfo info = {}; + + if (dev && dev->ethtool_ops && dev->ethtool_ops->get_drvinfo) + dev->ethtool_ops->get_drvinfo(dev, &info); + + WARN(1, "%s: caps=(0x%lx, 0x%lx) len=%d data_len=%d " + "ip_summed=%d", + info.driver, dev ? dev->features : 0L, + skb->sk ? skb->sk->sk_route_caps : 0L, + skb->len, skb->data_len, skb->ip_summed); + if (skb_header_cloned(skb) && (err = pskb_expand_head(skb, 0, 0, GFP_ATOMIC))) return ERR_PTR(err); @@ -2524,6 +2536,7 @@ struct sk_buff *napi_fraginfo_skb(struct napi_struct *napi, if (!pskb_may_pull(skb, ETH_HLEN)) { napi_reuse_skb(napi, skb); + skb = NULL; goto out; } diff --git a/net/core/net_namespace.c b/net/core/net_namespace.c index 55cffad2f32..55151faaf90 100644 --- a/net/core/net_namespace.c +++ b/net/core/net_namespace.c @@ -341,8 +341,8 @@ again: rv = register_pernet_operations(first_device, ops); if (rv < 0) ida_remove(&net_generic_ids, *id); - mutex_unlock(&net_mutex); out: + mutex_unlock(&net_mutex); return rv; } EXPORT_SYMBOL_GPL(register_pernet_gen_subsys); diff --git a/net/core/skbuff.c b/net/core/skbuff.c index 65eac773903..2e5f2ca3bdc 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -73,17 +73,13 @@ static struct kmem_cache *skbuff_fclone_cache __read_mostly; static void sock_pipe_buf_release(struct pipe_inode_info *pipe, struct pipe_buffer *buf) { - struct sk_buff *skb = (struct sk_buff *) buf->private; - - kfree_skb(skb); + put_page(buf->page); } static void sock_pipe_buf_get(struct pipe_inode_info *pipe, struct pipe_buffer *buf) { - struct sk_buff *skb = (struct sk_buff *) buf->private; - - skb_get(skb); + get_page(buf->page); } static int sock_pipe_buf_steal(struct pipe_inode_info *pipe, @@ -1334,9 +1330,19 @@ fault: */ static void sock_spd_release(struct splice_pipe_desc *spd, unsigned int i) { - struct sk_buff *skb = (struct sk_buff *) spd->partial[i].private; + put_page(spd->pages[i]); +} - kfree_skb(skb); +static inline struct page *linear_to_page(struct page *page, unsigned int len, + unsigned int offset) +{ + struct page *p = alloc_pages(GFP_KERNEL, 0); + + if (!p) + return NULL; + memcpy(page_address(p) + offset, page_address(page) + offset, len); + + return p; } /* @@ -1344,16 +1350,23 @@ static void sock_spd_release(struct splice_pipe_desc *spd, unsigned int i) */ static inline int spd_fill_page(struct splice_pipe_desc *spd, struct page *page, unsigned int len, unsigned int offset, - struct sk_buff *skb) + struct sk_buff *skb, int linear) { if (unlikely(spd->nr_pages == PIPE_BUFFERS)) return 1; + if (linear) { + page = linear_to_page(page, len, offset); + if (!page) + return 1; + } else + get_page(page); + spd->pages[spd->nr_pages] = page; spd->partial[spd->nr_pages].len = len; spd->partial[spd->nr_pages].offset = offset; - spd->partial[spd->nr_pages].private = (unsigned long) skb_get(skb); spd->nr_pages++; + return 0; } @@ -1369,7 +1382,7 @@ static inline void __segment_seek(struct page **page, unsigned int *poff, static inline int __splice_segment(struct page *page, unsigned int poff, unsigned int plen, unsigned int *off, unsigned int *len, struct sk_buff *skb, - struct splice_pipe_desc *spd) + struct splice_pipe_desc *spd, int linear) { if (!*len) return 1; @@ -1392,7 +1405,7 @@ static inline int __splice_segment(struct page *page, unsigned int poff, /* the linear region may spread across several pages */ flen = min_t(unsigned int, flen, PAGE_SIZE - poff); - if (spd_fill_page(spd, page, flen, poff, skb)) + if (spd_fill_page(spd, page, flen, poff, skb, linear)) return 1; __segment_seek(&page, &poff, &plen, flen); @@ -1419,7 +1432,7 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, if (__splice_segment(virt_to_page(skb->data), (unsigned long) skb->data & (PAGE_SIZE - 1), skb_headlen(skb), - offset, len, skb, spd)) + offset, len, skb, spd, 1)) return 1; /* @@ -1429,7 +1442,7 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, const skb_frag_t *f = &skb_shinfo(skb)->frags[seg]; if (__splice_segment(f->page, f->page_offset, f->size, - offset, len, skb, spd)) + offset, len, skb, spd, 0)) return 1; } @@ -1442,7 +1455,7 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, * the frag list, if such a thing exists. We'd probably need to recurse to * handle that cleanly. */ -int skb_splice_bits(struct sk_buff *__skb, unsigned int offset, +int skb_splice_bits(struct sk_buff *skb, unsigned int offset, struct pipe_inode_info *pipe, unsigned int tlen, unsigned int flags) { @@ -1455,16 +1468,6 @@ int skb_splice_bits(struct sk_buff *__skb, unsigned int offset, .ops = &sock_pipe_buf_ops, .spd_release = sock_spd_release, }; - struct sk_buff *skb; - - /* - * I'd love to avoid the clone here, but tcp_read_sock() - * ignores reference counts and unconditonally kills the sk_buff - * on return from the actor. - */ - skb = skb_clone(__skb, GFP_KERNEL); - if (unlikely(!skb)) - return -ENOMEM; /* * __skb_splice_bits() only fails if the output has no room left, @@ -1488,15 +1491,9 @@ int skb_splice_bits(struct sk_buff *__skb, unsigned int offset, } done: - /* - * drop our reference to the clone, the pipe consumption will - * drop the rest. - */ - kfree_skb(skb); - if (spd.nr_pages) { + struct sock *sk = skb->sk; int ret; - struct sock *sk = __skb->sk; /* * Drop the socket lock, otherwise we have reverse @@ -2588,8 +2585,9 @@ int skb_gro_receive(struct sk_buff **head, struct sk_buff *skb) struct sk_buff *nskb; unsigned int headroom; unsigned int hlen = p->data - skb_mac_header(p); + unsigned int len = skb->len; - if (hlen + p->len + skb->len >= 65536) + if (hlen + p->len + len >= 65536) return -E2BIG; if (skb_shinfo(p)->frag_list) @@ -2651,9 +2649,9 @@ merge: done: NAPI_GRO_CB(p)->count++; - p->data_len += skb->len; - p->truesize += skb->len; - p->len += skb->len; + p->data_len += len; + p->truesize += len; + p->len += len; NAPI_GRO_CB(skb)->same_flow = 1; return 0; diff --git a/net/ipv6/af_inet6.c b/net/ipv6/af_inet6.c index 94f74f5b0cb..c802bc1658a 100644 --- a/net/ipv6/af_inet6.c +++ b/net/ipv6/af_inet6.c @@ -797,6 +797,7 @@ static struct sk_buff **ipv6_gro_receive(struct sk_buff **head, unsigned int nlen; int flush = 1; int proto; + __wsum csum; if (unlikely(!pskb_may_pull(skb, sizeof(*iph)))) goto out; @@ -808,6 +809,7 @@ static struct sk_buff **ipv6_gro_receive(struct sk_buff **head, rcu_read_lock(); proto = ipv6_gso_pull_exthdrs(skb, iph->nexthdr); + iph = ipv6_hdr(skb); IPV6_GRO_CB(skb)->proto = proto; ops = rcu_dereference(inet6_protos[proto]); if (!ops || !ops->gro_receive) @@ -839,8 +841,13 @@ static struct sk_buff **ipv6_gro_receive(struct sk_buff **head, NAPI_GRO_CB(skb)->flush |= flush; + csum = skb->csum; + skb_postpull_rcsum(skb, iph, skb_network_header_len(skb)); + pp = ops->gro_receive(head, skb); + skb->csum = csum; + out_unlock: rcu_read_unlock(); diff --git a/net/key/af_key.c b/net/key/af_key.c index f8bd8df5e25..7dcbde3ea7d 100644 --- a/net/key/af_key.c +++ b/net/key/af_key.c @@ -1285,6 +1285,7 @@ static struct xfrm_state * pfkey_msg2xfrm_state(struct net *net, ext_hdrs[SADB_X_EXT_NAT_T_DPORT-1]; natt->encap_dport = n_port->sadb_x_nat_t_port_port; } + memset(&natt->encap_oa, 0, sizeof(natt->encap_oa)); } err = xfrm_init_state(x); diff --git a/net/mac80211/mlme.c b/net/mac80211/mlme.c index 5ba721b6a39..2b890af01ba 100644 --- a/net/mac80211/mlme.c +++ b/net/mac80211/mlme.c @@ -620,8 +620,8 @@ static u32 ieee80211_handle_bss_capability(struct ieee80211_sub_if_data *sdata, if (use_short_slot != bss_conf->use_short_slot) { #ifdef CONFIG_MAC80211_VERBOSE_DEBUG if (net_ratelimit()) { - printk(KERN_DEBUG "%s: switched to %s slot" - " (BSSID=%s)\n", + printk(KERN_DEBUG "%s: switched to %s slot time" + " (BSSID=%pM)\n", sdata->dev->name, use_short_slot ? "short" : "long", ifsta->bssid); diff --git a/net/mac80211/sta_info.h b/net/mac80211/sta_info.h index dc2606d0ae7..e49a5b99cf1 100644 --- a/net/mac80211/sta_info.h +++ b/net/mac80211/sta_info.h @@ -195,7 +195,6 @@ struct sta_ampdu_mlme { * @tx_packets: number of RX/TX MSDUs * @tx_bytes: number of bytes transmitted to this STA * @tx_fragments: number of transmitted MPDUs - * @last_txrate: description of the last used transmit rate * @tid_seq: per-TID sequence numbers for sending to this STA * @ampdu_mlme: A-MPDU state machine state * @timer_to_tid: identity mapping to ID timers diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c index a4af3a124cc..4278e545638 100644 --- a/net/mac80211/tx.c +++ b/net/mac80211/tx.c @@ -1307,8 +1307,10 @@ int ieee80211_master_start_xmit(struct sk_buff *skb, struct net_device *dev) if (is_multicast_ether_addr(hdr->addr3)) memcpy(hdr->addr1, hdr->addr3, ETH_ALEN); else - if (mesh_nexthop_lookup(skb, osdata)) - return 0; + if (mesh_nexthop_lookup(skb, osdata)) { + dev_put(odev); + return 0; + } if (memcmp(odev->dev_addr, hdr->addr4, ETH_ALEN) != 0) IEEE80211_IFSTA_MESH_CTR_INC(&osdata->u.mesh, fwded_frames); diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c index 3dddec6d2f7..c32a7e8e3a1 100644 --- a/net/netfilter/nf_conntrack_netlink.c +++ b/net/netfilter/nf_conntrack_netlink.c @@ -831,13 +831,16 @@ ctnetlink_parse_nat_setup(struct nf_conn *ct, if (!parse_nat_setup) { #ifdef CONFIG_MODULES rcu_read_unlock(); + spin_unlock_bh(&nf_conntrack_lock); nfnl_unlock(); if (request_module("nf-nat-ipv4") < 0) { nfnl_lock(); + spin_lock_bh(&nf_conntrack_lock); rcu_read_lock(); return -EOPNOTSUPP; } nfnl_lock(); + spin_lock_bh(&nf_conntrack_lock); rcu_read_lock(); if (nfnetlink_parse_nat_setup_hook) return -EAGAIN; diff --git a/net/sctp/input.c b/net/sctp/input.c index bf612d954d4..2e4a8646dbc 100644 --- a/net/sctp/input.c +++ b/net/sctp/input.c @@ -249,6 +249,19 @@ int sctp_rcv(struct sk_buff *skb) */ sctp_bh_lock_sock(sk); + if (sk != rcvr->sk) { + /* Our cached sk is different from the rcvr->sk. This is + * because migrate()/accept() may have moved the association + * to a new socket and released all the sockets. So now we + * are holding a lock on the old socket while the user may + * be doing something with the new socket. Switch our veiw + * of the current sk. + */ + sctp_bh_unlock_sock(sk); + sk = rcvr->sk; + sctp_bh_lock_sock(sk); + } + if (sock_owned_by_user(sk)) { SCTP_INC_STATS_BH(SCTP_MIB_IN_PKT_BACKLOG); sctp_add_backlog(sk, skb); diff --git a/net/sctp/output.c b/net/sctp/output.c index c3f417f7ec6..73639355157 100644 --- a/net/sctp/output.c +++ b/net/sctp/output.c @@ -324,14 +324,16 @@ append: switch (chunk->chunk_hdr->type) { case SCTP_CID_DATA: retval = sctp_packet_append_data(packet, chunk); + if (SCTP_XMIT_OK != retval) + goto finish; /* Disallow SACK bundling after DATA. */ packet->has_sack = 1; /* Disallow AUTH bundling after DATA */ packet->has_auth = 1; /* Let it be knows that packet has DATA in it */ packet->has_data = 1; - if (SCTP_XMIT_OK != retval) - goto finish; + /* timestamp the chunk for rtx purposes */ + chunk->sent_at = jiffies; break; case SCTP_CID_COOKIE_ECHO: packet->has_cookie_echo = 1; @@ -470,7 +472,6 @@ int sctp_packet_transmit(struct sctp_packet *packet) } else chunk->resent = 1; - chunk->sent_at = jiffies; has_data = 1; } diff --git a/net/sctp/outqueue.c b/net/sctp/outqueue.c index 247ebc95c1e..bc411c89621 100644 --- a/net/sctp/outqueue.c +++ b/net/sctp/outqueue.c @@ -929,7 +929,6 @@ static int sctp_outq_flush(struct sctp_outq *q, int rtx_timeout) } /* Finally, transmit new packets. */ - start_timer = 0; while ((chunk = sctp_outq_dequeue_data(q)) != NULL) { /* RFC 2960 6.5 Every DATA chunk MUST carry a valid * stream identifier. @@ -1028,7 +1027,7 @@ static int sctp_outq_flush(struct sctp_outq *q, int rtx_timeout) list_add_tail(&chunk->transmitted_list, &transport->transmitted); - sctp_transport_reset_timers(transport, start_timer-1); + sctp_transport_reset_timers(transport, 0); q->empty = 0; diff --git a/net/sunrpc/Kconfig b/net/sunrpc/Kconfig new file mode 100644 index 00000000000..dcef600d0bf --- /dev/null +++ b/net/sunrpc/Kconfig @@ -0,0 +1,78 @@ +config SUNRPC + tristate + +config SUNRPC_GSS + tristate + +config SUNRPC_XPRT_RDMA + tristate + depends on SUNRPC && INFINIBAND && EXPERIMENTAL + default SUNRPC && INFINIBAND + help + This option allows the NFS client and server to support + an RDMA-enabled transport. + + To compile RPC client RDMA transport support as a module, + choose M here: the module will be called xprtrdma. + + If unsure, say N. + +config SUNRPC_REGISTER_V4 + bool "Register local RPC services via rpcbind v4 (EXPERIMENTAL)" + depends on SUNRPC && EXPERIMENTAL + default n + help + Sun added support for registering RPC services at an IPv6 + address by creating two new versions of the rpcbind protocol + (RFC 1833). + + This option enables support in the kernel RPC server for + registering kernel RPC services via version 4 of the rpcbind + protocol. If you enable this option, you must run a portmapper + daemon that supports rpcbind protocol version 4. + + Serving NFS over IPv6 from knfsd (the kernel's NFS server) + requires that you enable this option and use a portmapper that + supports rpcbind version 4. + + If unsure, say N to get traditional behavior (register kernel + RPC services using only rpcbind version 2). Distributions + using the legacy Linux portmapper daemon must say N here. + +config RPCSEC_GSS_KRB5 + tristate "Secure RPC: Kerberos V mechanism (EXPERIMENTAL)" + depends on SUNRPC && EXPERIMENTAL + select SUNRPC_GSS + select CRYPTO + select CRYPTO_MD5 + select CRYPTO_DES + select CRYPTO_CBC + help + Choose Y here to enable Secure RPC using the Kerberos version 5 + GSS-API mechanism (RFC 1964). + + Secure RPC calls with Kerberos require an auxiliary user-space + daemon which may be found in the Linux nfs-utils package + available from http://linux-nfs.org/. In addition, user-space + Kerberos support should be installed. + + If unsure, say N. + +config RPCSEC_GSS_SPKM3 + tristate "Secure RPC: SPKM3 mechanism (EXPERIMENTAL)" + depends on SUNRPC && EXPERIMENTAL + select SUNRPC_GSS + select CRYPTO + select CRYPTO_MD5 + select CRYPTO_DES + select CRYPTO_CAST5 + select CRYPTO_CBC + help + Choose Y here to enable Secure RPC using the SPKM3 public key + GSS-API mechansim (RFC 2025). + + Secure RPC calls with SPKM3 require an auxiliary userspace + daemon which may be found in the Linux nfs-utils package + available from http://linux-nfs.org/. + + If unsure, say N. diff --git a/net/wireless/reg.c b/net/wireless/reg.c index 4f877535e66..bc494cef210 100644 --- a/net/wireless/reg.c +++ b/net/wireless/reg.c @@ -421,6 +421,31 @@ static u32 freq_max_bandwidth(const struct ieee80211_freq_range *freq_range, return 0; } +/** + * freq_in_rule_band - tells us if a frequency is in a frequency band + * @freq_range: frequency rule we want to query + * @freq_khz: frequency we are inquiring about + * + * This lets us know if a specific frequency rule is or is not relevant to + * a specific frequency's band. Bands are device specific and artificial + * definitions (the "2.4 GHz band" and the "5 GHz band"), however it is + * safe for now to assume that a frequency rule should not be part of a + * frequency's band if the start freq or end freq are off by more than 2 GHz. + * This resolution can be lowered and should be considered as we add + * regulatory rule support for other "bands". + **/ +static bool freq_in_rule_band(const struct ieee80211_freq_range *freq_range, + u32 freq_khz) +{ +#define ONE_GHZ_IN_KHZ 1000000 + if (abs(freq_khz - freq_range->start_freq_khz) <= (2 * ONE_GHZ_IN_KHZ)) + return true; + if (abs(freq_khz - freq_range->end_freq_khz) <= (2 * ONE_GHZ_IN_KHZ)) + return true; + return false; +#undef ONE_GHZ_IN_KHZ +} + /* Converts a country IE to a regulatory domain. A regulatory domain * structure has a lot of information which the IE doesn't yet have, * so for the other values we use upper max values as we will intersect @@ -538,6 +563,7 @@ static struct ieee80211_regdomain *country_ie_2_rd( /* This time around we fill in the rd */ while (country_ie_len >= 3) { + int end_channel = 0; struct ieee80211_country_ie_triplet *triplet = (struct ieee80211_country_ie_triplet *) country_ie; struct ieee80211_reg_rule *reg_rule = NULL; @@ -559,6 +585,23 @@ static struct ieee80211_regdomain *country_ie_2_rd( reg_rule->flags = flags; + /* 2 GHz */ + if (triplet->chans.first_channel <= 14) + end_channel = triplet->chans.first_channel + + triplet->chans.num_channels; + else + /* + * 5 GHz -- For example in country IEs if the first + * channel given is 36 and the number of channels is 4 + * then the individual channel numbers defined for the + * 5 GHz PHY by these parameters are: 36, 40, 44, and 48 + * and not 36, 37, 38, 39. + * + * See: http://tinyurl.com/11d-clarification + */ + end_channel = triplet->chans.first_channel + + (4 * (triplet->chans.num_channels - 1)); + /* The +10 is since the regulatory domain expects * the actual band edge, not the center of freq for * its start and end freqs, assuming 20 MHz bandwidth on @@ -568,8 +611,7 @@ static struct ieee80211_regdomain *country_ie_2_rd( triplet->chans.first_channel) - 10); freq_range->end_freq_khz = MHZ_TO_KHZ(ieee80211_channel_to_frequency( - triplet->chans.first_channel + - triplet->chans.num_channels) + 10); + end_channel) + 10); /* Large arbitrary values, we intersect later */ /* Increment this if we ever support >= 40 MHz channels @@ -748,12 +790,23 @@ static u32 map_regdom_flags(u32 rd_flags) * this value to the maximum allowed bandwidth. * @reg_rule: the regulatory rule which we have for this frequency * - * Use this function to get the regulatory rule for a specific frequency. + * Use this function to get the regulatory rule for a specific frequency on + * a given wireless device. If the device has a specific regulatory domain + * it wants to follow we respect that unless a country IE has been received + * and processed already. + * + * Returns 0 if it was able to find a valid regulatory rule which does + * apply to the given center_freq otherwise it returns non-zero. It will + * also return -ERANGE if we determine the given center_freq does not even have + * a regulatory rule for a frequency range in the center_freq's band. See + * freq_in_rule_band() for our current definition of a band -- this is purely + * subjective and right now its 802.11 specific. */ static int freq_reg_info(u32 center_freq, u32 *bandwidth, const struct ieee80211_reg_rule **reg_rule) { int i; + bool band_rule_found = false; u32 max_bandwidth = 0; if (!cfg80211_regdomain) @@ -767,7 +820,15 @@ static int freq_reg_info(u32 center_freq, u32 *bandwidth, rr = &cfg80211_regdomain->reg_rules[i]; fr = &rr->freq_range; pr = &rr->power_rule; + + /* We only need to know if one frequency rule was + * was in center_freq's band, that's enough, so lets + * not overwrite it once found */ + if (!band_rule_found) + band_rule_found = freq_in_rule_band(fr, center_freq); + max_bandwidth = freq_max_bandwidth(fr, center_freq); + if (max_bandwidth && *bandwidth <= max_bandwidth) { *reg_rule = rr; *bandwidth = max_bandwidth; @@ -775,23 +836,64 @@ static int freq_reg_info(u32 center_freq, u32 *bandwidth, } } + if (!band_rule_found) + return -ERANGE; + return !max_bandwidth; } -static void handle_channel(struct ieee80211_channel *chan) +static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band, + unsigned int chan_idx) { int r; - u32 flags = chan->orig_flags; + u32 flags; u32 max_bandwidth = 0; const struct ieee80211_reg_rule *reg_rule = NULL; const struct ieee80211_power_rule *power_rule = NULL; + struct ieee80211_supported_band *sband; + struct ieee80211_channel *chan; + + sband = wiphy->bands[band]; + BUG_ON(chan_idx >= sband->n_channels); + chan = &sband->channels[chan_idx]; + + flags = chan->orig_flags; r = freq_reg_info(MHZ_TO_KHZ(chan->center_freq), &max_bandwidth, ®_rule); if (r) { - flags |= IEEE80211_CHAN_DISABLED; - chan->flags = flags; + /* This means no regulatory rule was found in the country IE + * with a frequency range on the center_freq's band, since + * IEEE-802.11 allows for a country IE to have a subset of the + * regulatory information provided in a country we ignore + * disabling the channel unless at least one reg rule was + * found on the center_freq's band. For details see this + * clarification: + * + * http://tinyurl.com/11d-clarification + */ + if (r == -ERANGE && + last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) { +#ifdef CONFIG_CFG80211_REG_DEBUG + printk(KERN_DEBUG "cfg80211: Leaving channel %d MHz " + "intact on %s - no rule found in band on " + "Country IE\n", + chan->center_freq, wiphy_name(wiphy)); +#endif + } else { + /* In this case we know the country IE has at least one reg rule + * for the band so we respect its band definitions */ +#ifdef CONFIG_CFG80211_REG_DEBUG + if (last_request->initiator == REGDOM_SET_BY_COUNTRY_IE) + printk(KERN_DEBUG "cfg80211: Disabling " + "channel %d MHz on %s due to " + "Country IE\n", + chan->center_freq, wiphy_name(wiphy)); +#endif + flags |= IEEE80211_CHAN_DISABLED; + chan->flags = flags; + } return; } @@ -808,12 +910,16 @@ static void handle_channel(struct ieee80211_channel *chan) chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp); } -static void handle_band(struct ieee80211_supported_band *sband) +static void handle_band(struct wiphy *wiphy, enum ieee80211_band band) { - int i; + unsigned int i; + struct ieee80211_supported_band *sband; + + BUG_ON(!wiphy->bands[band]); + sband = wiphy->bands[band]; for (i = 0; i < sband->n_channels; i++) - handle_channel(&sband->channels[i]); + handle_channel(wiphy, band, i); } static bool ignore_reg_update(struct wiphy *wiphy, enum reg_set_by setby) @@ -840,7 +946,7 @@ void wiphy_update_regulatory(struct wiphy *wiphy, enum reg_set_by setby) enum ieee80211_band band; for (band = 0; band < IEEE80211_NUM_BANDS; band++) { if (wiphy->bands[band]) - handle_band(wiphy->bands[band]); + handle_band(wiphy, band); if (wiphy->reg_notifier) wiphy->reg_notifier(wiphy, setby); } diff --git a/net/xfrm/xfrm_user.c b/net/xfrm/xfrm_user.c index 7877e7975da..b95a2d64eb5 100644 --- a/net/xfrm/xfrm_user.c +++ b/net/xfrm/xfrm_user.c @@ -1914,17 +1914,10 @@ static int xfrm_send_migrate(struct xfrm_selector *sel, u8 dir, u8 type, } #endif -/* For the xfrm_usersa_info cases we have to work around some 32-bit vs. - * 64-bit compatability issues. On 32-bit the structure is 220 bytes, but - * for 64-bit it gets padded out to 224 bytes. Those bytes are just - * padding and don't have any content we care about. Therefore as long - * as we have enough bytes for the content we can make both cases work. - */ - #define XMSGSIZE(type) sizeof(struct type) static const int xfrm_msg_min[XFRM_NR_MSGTYPES] = { - [XFRM_MSG_NEWSA - XFRM_MSG_BASE] = 220, /* see above */ + [XFRM_MSG_NEWSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_info), [XFRM_MSG_DELSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_id), [XFRM_MSG_GETSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_id), [XFRM_MSG_NEWPOLICY - XFRM_MSG_BASE] = XMSGSIZE(xfrm_userpolicy_info), @@ -1934,7 +1927,7 @@ static const int xfrm_msg_min[XFRM_NR_MSGTYPES] = { [XFRM_MSG_ACQUIRE - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_acquire), [XFRM_MSG_EXPIRE - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_expire), [XFRM_MSG_UPDPOLICY - XFRM_MSG_BASE] = XMSGSIZE(xfrm_userpolicy_info), - [XFRM_MSG_UPDSA - XFRM_MSG_BASE] = 220, /* see above */ + [XFRM_MSG_UPDSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_info), [XFRM_MSG_POLEXPIRE - XFRM_MSG_BASE] = XMSGSIZE(xfrm_user_polexpire), [XFRM_MSG_FLUSHSA - XFRM_MSG_BASE] = XMSGSIZE(xfrm_usersa_flush), [XFRM_MSG_FLUSHPOLICY - XFRM_MSG_BASE] = 0, diff --git a/scripts/Makefile.build b/scripts/Makefile.build index 5d900307de3..c7de8b39fcf 100644 --- a/scripts/Makefile.build +++ b/scripts/Makefile.build @@ -151,16 +151,16 @@ cmd_cc_i_c = $(CPP) $(c_flags) -o $@ $< $(obj)/%.i: $(src)/%.c FORCE $(call if_changed_dep,cc_i_c) -cmd_genksyms = \ +cmd_gensymtypes = \ $(CPP) -D__GENKSYMS__ $(c_flags) $< | \ - $(GENKSYMS) -T $@ -A -a $(ARCH) \ + $(GENKSYMS) -T $@ -a $(ARCH) \ $(if $(KBUILD_PRESERVE),-p) \ $(if $(1),-r $(firstword $(wildcard $(@:.symtypes=.symref) /dev/null))) quiet_cmd_cc_symtypes_c = SYM $(quiet_modtag) $@ cmd_cc_symtypes_c = \ set -e; \ - $(call cmd_genksyms, true) >/dev/null; \ + $(call cmd_gensymtypes, true) >/dev/null; \ test -s $@ || rm -f $@ $(obj)/%.symtypes : $(src)/%.c FORCE @@ -177,38 +177,28 @@ cmd_cc_o_c = $(CC) $(c_flags) -c -o $@ $< else # When module versioning is enabled the following steps are executed: -# o compile a .tmp_<file>.s from <file>.c -# o if .tmp_<file>.s doesn't contain a __ksymtab version, i.e. does -# not export symbols, we just assemble .tmp_<file>.s to <file>.o and +# o compile a .tmp_<file>.o from <file>.c +# o if .tmp_<file>.o doesn't contain a __ksymtab version, i.e. does +# not export symbols, we just rename .tmp_<file>.o to <file>.o and # are done. # o otherwise, we calculate symbol versions using the good old # genksyms on the preprocessed source and postprocess them in a way -# that they are usable as assembly source -# o assemble <file>.o from .tmp_<file>.s forcing inclusion of directives -# defining the actual values of __crc_*, followed by objcopy-ing them -# to force these symbols to be local to permit stripping them later. -s_file = $(@D)/.tmp_$(@F:.o=.s) -v_file = $(@D)/.tmp_$(@F:.o=.v) -tmp_o_file = $(@D)/.tmp_$(@F) -no_g_c_flags = $(filter-out -g%,$(c_flags)) - -cmd_cc_o_c = $(CC) $(c_flags) -S -o $(s_file) $< +# that they are usable as a linker script +# o generate <file>.o from .tmp_<file>.o using the linker to +# replace the unresolved symbols __crc_exported_symbol with +# the actual value of the checksum generated by genksyms +cmd_cc_o_c = $(CC) $(c_flags) -c -o $(@D)/.tmp_$(@F) $< cmd_modversions = \ - if grep -q __ksymtab $(s_file); then \ - if $(call cmd_genksyms, $(KBUILD_SYMTYPES)) > $(v_file) \ - && $(CC) $(no_g_c_flags) -c -Wa,$(v_file) \ - -o $(tmp_o_file) $(s_file) \ - && $(OBJCOPY) -L '__crc_*' -L '___crc_*' -w \ - $(tmp_o_file) $@; \ - then \ - : ; \ - else \ - rm -f $@; exit 1; \ - fi; \ + if $(OBJDUMP) -h $(@D)/.tmp_$(@F) | grep -q __ksymtab; then \ + $(call cmd_gensymtypes, $(KBUILD_SYMTYPES)) \ + > $(@D)/.tmp_$(@F:.o=.ver); \ + \ + $(LD) $(LDFLAGS) -r -o $@ $(@D)/.tmp_$(@F) \ + -T $(@D)/.tmp_$(@F:.o=.ver); \ + rm -f $(@D)/.tmp_$(@F) $(@D)/.tmp_$(@F:.o=.ver); \ else \ - rm -f $(v_file); \ - $(CC) $(no_g_c_flags) -c -o $@ $(s_file); \ + mv -f $(@D)/.tmp_$(@F) $@; \ fi; endif @@ -225,12 +215,7 @@ define rule_cc_o_c $(cmd_record_mcount) \ scripts/basic/fixdep $(depfile) $@ '$(call make-cmd,cc_o_c)' > \ $(dot-target).tmp; \ - if [ -r $(@D)/.tmp_$(@F:.o=.v) ]; then \ - echo >> $(dot-target).tmp; \ - echo '$@: $(GENKSYMS)' >> $(dot-target).tmp; \ - echo '$(GENKSYMS):: ;' >> $(dot-target).tmp; \ - fi; \ - rm -f $(depfile) $(@D)/.tmp_$(@F:.o=.?); \ + rm -f $(depfile); \ mv -f $(dot-target).tmp $(dot-target).cmd endef diff --git a/scripts/Makefile.modinst b/scripts/Makefile.modinst index a5122dce126..efa5d940e63 100644 --- a/scripts/Makefile.modinst +++ b/scripts/Makefile.modinst @@ -17,8 +17,7 @@ __modinst: $(modules) @: quiet_cmd_modules_install = INSTALL $@ - cmd_modules_install = mkdir -p $(2); \ - $(mod_strip_cmd) $@ $(2)/$(notdir $@) || cp $@ $(2) + cmd_modules_install = mkdir -p $(2); cp $@ $(2) ; $(mod_strip_cmd) $(2)/$(notdir $@) # Modules built outside the kernel source tree go into extra by default INSTALL_MOD_DIR ?= extra diff --git a/scripts/config b/scripts/config index 68b9761cdc3..db6084b78a1 100755 --- a/scripts/config +++ b/scripts/config @@ -60,6 +60,10 @@ else FN=.config fi +if [ "$1" = "" ] ; then + usage +fi + while [ "$1" != "" ] ; do CMD="$1" shift diff --git a/scripts/genksyms/genksyms.c b/scripts/genksyms/genksyms.c index f8bb4cabd62..3a8297b5184 100644 --- a/scripts/genksyms/genksyms.c +++ b/scripts/genksyms/genksyms.c @@ -43,7 +43,7 @@ int cur_line = 1; char *cur_filename; static int flag_debug, flag_dump_defs, flag_reference, flag_dump_types, - flag_preserve, flag_warnings, flag_asm; + flag_preserve, flag_warnings; static const char *arch = ""; static const char *mod_prefix = ""; @@ -610,11 +610,8 @@ void export_symbol(const char *name) if (flag_dump_defs) fputs(">\n", debugfile); - /* Used as assembly source or a linker script. */ - printf(flag_asm - ? ".equiv %s__crc_%s, %#08lx\n" - : "%s__crc_%s = %#08lx ;\n", - mod_prefix, name, crc); + /* Used as a linker script. */ + printf("%s__crc_%s = 0x%08lx ;\n", mod_prefix, name, crc); } } @@ -651,10 +648,9 @@ void error_with_pos(const char *fmt, ...) static void genksyms_usage(void) { - fputs("Usage:\n" "genksyms [-aAdDTwqhV] > /path/to/.tmp_obj.ver\n" "\n" + fputs("Usage:\n" "genksyms [-adDTwqhV] > /path/to/.tmp_obj.ver\n" "\n" #ifdef __GNU_LIBRARY__ " -a, --arch Select architecture\n" - " -A, --asm Generate assembly rather than linker script\n" " -d, --debug Increment the debug level (repeatable)\n" " -D, --dump Dump expanded symbol defs (for debugging only)\n" " -r, --reference file Read reference symbols from a file\n" @@ -666,7 +662,6 @@ static void genksyms_usage(void) " -V, --version Print the release version\n" #else /* __GNU_LIBRARY__ */ " -a Select architecture\n" - " -A Generate assembly rather than linker script\n" " -d Increment the debug level (repeatable)\n" " -D Dump expanded symbol defs (for debugging only)\n" " -r file Read reference symbols from a file\n" @@ -688,7 +683,6 @@ int main(int argc, char **argv) #ifdef __GNU_LIBRARY__ struct option long_opts[] = { {"arch", 1, 0, 'a'}, - {"asm", 0, 0, 'A'}, {"debug", 0, 0, 'd'}, {"warnings", 0, 0, 'w'}, {"quiet", 0, 0, 'q'}, @@ -701,10 +695,10 @@ int main(int argc, char **argv) {0, 0, 0, 0} }; - while ((o = getopt_long(argc, argv, "a:dwqVADr:T:ph", + while ((o = getopt_long(argc, argv, "a:dwqVDr:T:ph", &long_opts[0], NULL)) != EOF) #else /* __GNU_LIBRARY__ */ - while ((o = getopt(argc, argv, "a:dwqVADr:T:ph")) != EOF) + while ((o = getopt(argc, argv, "a:dwqVDr:T:ph")) != EOF) #endif /* __GNU_LIBRARY__ */ switch (o) { case 'a': @@ -722,9 +716,6 @@ int main(int argc, char **argv) case 'V': fputs("genksyms version 2.5.60\n", stderr); break; - case 'A': - flag_asm = 1; - break; case 'D': flag_dump_defs = 1; break; diff --git a/scripts/genksyms/keywords.c_shipped b/scripts/genksyms/keywords.c_shipped index 83484fe93ed..971e0113ae7 100644 --- a/scripts/genksyms/keywords.c_shipped +++ b/scripts/genksyms/keywords.c_shipped @@ -1,4 +1,4 @@ -/* ANSI-C code produced by gperf version 3.0.1 */ +/* ANSI-C code produced by gperf version 3.0.2 */ /* Command-line: gperf -L ANSI-C -a -C -E -g -H is_reserved_hash -k '1,3,$' -N is_reserved_word -p -t scripts/genksyms/keywords.gperf */ #if !((' ' == 32) && ('!' == 33) && ('"' == 34) && ('#' == 35) \ @@ -32,7 +32,7 @@ #line 3 "scripts/genksyms/keywords.gperf" struct resword { const char *name; int token; }; -/* maximum key range = 64, duplicates = 0 */ +/* maximum key range = 62, duplicates = 0 */ #ifdef __GNUC__ __inline @@ -46,32 +46,32 @@ is_reserved_hash (register const char *str, register unsigned int len) { static const unsigned char asso_values[] = { - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 0, - 67, 67, 67, 67, 67, 67, 15, 67, 67, 67, - 0, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 0, 67, 0, 67, 5, - 25, 20, 15, 30, 67, 15, 67, 67, 10, 0, - 10, 40, 20, 67, 10, 5, 0, 10, 15, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67, 67, 67, 67, 67, - 67, 67, 67, 67, 67, 67 + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 5, + 65, 65, 65, 65, 65, 65, 35, 65, 65, 65, + 0, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 0, 65, 0, 65, 5, + 20, 15, 10, 30, 65, 15, 65, 65, 20, 0, + 10, 35, 20, 65, 10, 5, 0, 10, 5, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65, 65, 65, 65, 65, + 65, 65, 65, 65, 65, 65 }; return len + asso_values[(unsigned char)str[2]] + asso_values[(unsigned char)str[0]] + asso_values[(unsigned char)str[len - 1]]; } @@ -84,119 +84,116 @@ is_reserved_word (register const char *str, register unsigned int len) { enum { - TOTAL_KEYWORDS = 45, + TOTAL_KEYWORDS = 43, MIN_WORD_LENGTH = 3, MAX_WORD_LENGTH = 24, MIN_HASH_VALUE = 3, - MAX_HASH_VALUE = 66 + MAX_HASH_VALUE = 64 }; static const struct resword wordlist[] = { {""}, {""}, {""}, -#line 28 "scripts/genksyms/keywords.gperf" +#line 26 "scripts/genksyms/keywords.gperf" {"asm", ASM_KEYW}, {""}, -#line 10 "scripts/genksyms/keywords.gperf" +#line 8 "scripts/genksyms/keywords.gperf" {"__asm", ASM_KEYW}, {""}, -#line 11 "scripts/genksyms/keywords.gperf" +#line 9 "scripts/genksyms/keywords.gperf" {"__asm__", ASM_KEYW}, {""}, {""}, -#line 54 "scripts/genksyms/keywords.gperf" +#line 52 "scripts/genksyms/keywords.gperf" {"__typeof__", TYPEOF_KEYW}, {""}, -#line 14 "scripts/genksyms/keywords.gperf" +#line 12 "scripts/genksyms/keywords.gperf" {"__const", CONST_KEYW}, -#line 13 "scripts/genksyms/keywords.gperf" +#line 11 "scripts/genksyms/keywords.gperf" {"__attribute__", ATTRIBUTE_KEYW}, -#line 15 "scripts/genksyms/keywords.gperf" +#line 13 "scripts/genksyms/keywords.gperf" {"__const__", CONST_KEYW}, -#line 20 "scripts/genksyms/keywords.gperf" +#line 18 "scripts/genksyms/keywords.gperf" {"__signed__", SIGNED_KEYW}, -#line 46 "scripts/genksyms/keywords.gperf" +#line 44 "scripts/genksyms/keywords.gperf" {"static", STATIC_KEYW}, - {""}, -#line 41 "scripts/genksyms/keywords.gperf" +#line 20 "scripts/genksyms/keywords.gperf" + {"__volatile__", VOLATILE_KEYW}, +#line 39 "scripts/genksyms/keywords.gperf" {"int", INT_KEYW}, -#line 34 "scripts/genksyms/keywords.gperf" +#line 32 "scripts/genksyms/keywords.gperf" {"char", CHAR_KEYW}, -#line 35 "scripts/genksyms/keywords.gperf" +#line 33 "scripts/genksyms/keywords.gperf" {"const", CONST_KEYW}, -#line 47 "scripts/genksyms/keywords.gperf" +#line 45 "scripts/genksyms/keywords.gperf" {"struct", STRUCT_KEYW}, -#line 26 "scripts/genksyms/keywords.gperf" +#line 24 "scripts/genksyms/keywords.gperf" {"__restrict__", RESTRICT_KEYW}, -#line 27 "scripts/genksyms/keywords.gperf" - {"restrict", RESTRICT_KEYW}, -#line 7 "scripts/genksyms/keywords.gperf" - {"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW}, -#line 18 "scripts/genksyms/keywords.gperf" - {"__inline__", INLINE_KEYW}, - {""}, -#line 22 "scripts/genksyms/keywords.gperf" - {"__volatile__", VOLATILE_KEYW}, -#line 5 "scripts/genksyms/keywords.gperf" - {"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW}, #line 25 "scripts/genksyms/keywords.gperf" + {"restrict", RESTRICT_KEYW}, +#line 23 "scripts/genksyms/keywords.gperf" {"_restrict", RESTRICT_KEYW}, - {""}, -#line 12 "scripts/genksyms/keywords.gperf" - {"__attribute", ATTRIBUTE_KEYW}, -#line 6 "scripts/genksyms/keywords.gperf" - {"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW}, #line 16 "scripts/genksyms/keywords.gperf" + {"__inline__", INLINE_KEYW}, +#line 10 "scripts/genksyms/keywords.gperf" + {"__attribute", ATTRIBUTE_KEYW}, + {""}, +#line 14 "scripts/genksyms/keywords.gperf" {"__extension__", EXTENSION_KEYW}, -#line 37 "scripts/genksyms/keywords.gperf" +#line 35 "scripts/genksyms/keywords.gperf" {"enum", ENUM_KEYW}, -#line 8 "scripts/genksyms/keywords.gperf" - {"EXPORT_UNUSED_SYMBOL", EXPORT_SYMBOL_KEYW}, -#line 38 "scripts/genksyms/keywords.gperf" +#line 19 "scripts/genksyms/keywords.gperf" + {"__volatile", VOLATILE_KEYW}, +#line 36 "scripts/genksyms/keywords.gperf" {"extern", EXTERN_KEYW}, {""}, -#line 19 "scripts/genksyms/keywords.gperf" +#line 17 "scripts/genksyms/keywords.gperf" {"__signed", SIGNED_KEYW}, -#line 9 "scripts/genksyms/keywords.gperf" - {"EXPORT_UNUSED_SYMBOL_GPL", EXPORT_SYMBOL_KEYW}, -#line 49 "scripts/genksyms/keywords.gperf" - {"union", UNION_KEYW}, -#line 53 "scripts/genksyms/keywords.gperf" +#line 7 "scripts/genksyms/keywords.gperf" + {"EXPORT_SYMBOL_GPL_FUTURE", EXPORT_SYMBOL_KEYW}, + {""}, +#line 51 "scripts/genksyms/keywords.gperf" {"typeof", TYPEOF_KEYW}, -#line 48 "scripts/genksyms/keywords.gperf" +#line 46 "scripts/genksyms/keywords.gperf" {"typedef", TYPEDEF_KEYW}, -#line 17 "scripts/genksyms/keywords.gperf" +#line 15 "scripts/genksyms/keywords.gperf" {"__inline", INLINE_KEYW}, -#line 33 "scripts/genksyms/keywords.gperf" +#line 31 "scripts/genksyms/keywords.gperf" {"auto", AUTO_KEYW}, -#line 21 "scripts/genksyms/keywords.gperf" - {"__volatile", VOLATILE_KEYW}, +#line 47 "scripts/genksyms/keywords.gperf" + {"union", UNION_KEYW}, {""}, {""}, -#line 50 "scripts/genksyms/keywords.gperf" +#line 48 "scripts/genksyms/keywords.gperf" {"unsigned", UNSIGNED_KEYW}, - {""}, -#line 44 "scripts/genksyms/keywords.gperf" +#line 49 "scripts/genksyms/keywords.gperf" + {"void", VOID_KEYW}, +#line 42 "scripts/genksyms/keywords.gperf" {"short", SHORT_KEYW}, -#line 40 "scripts/genksyms/keywords.gperf" + {""}, {""}, +#line 50 "scripts/genksyms/keywords.gperf" + {"volatile", VOLATILE_KEYW}, + {""}, +#line 37 "scripts/genksyms/keywords.gperf" + {"float", FLOAT_KEYW}, +#line 34 "scripts/genksyms/keywords.gperf" + {"double", DOUBLE_KEYW}, + {""}, +#line 5 "scripts/genksyms/keywords.gperf" + {"EXPORT_SYMBOL", EXPORT_SYMBOL_KEYW}, + {""}, {""}, +#line 38 "scripts/genksyms/keywords.gperf" {"inline", INLINE_KEYW}, +#line 6 "scripts/genksyms/keywords.gperf" + {"EXPORT_SYMBOL_GPL", EXPORT_SYMBOL_KEYW}, +#line 41 "scripts/genksyms/keywords.gperf" + {"register", REGISTER_KEYW}, {""}, -#line 52 "scripts/genksyms/keywords.gperf" - {"volatile", VOLATILE_KEYW}, -#line 42 "scripts/genksyms/keywords.gperf" - {"long", LONG_KEYW}, -#line 24 "scripts/genksyms/keywords.gperf" +#line 22 "scripts/genksyms/keywords.gperf" {"_Bool", BOOL_KEYW}, - {""}, {""}, #line 43 "scripts/genksyms/keywords.gperf" - {"register", REGISTER_KEYW}, -#line 51 "scripts/genksyms/keywords.gperf" - {"void", VOID_KEYW}, -#line 39 "scripts/genksyms/keywords.gperf" - {"float", FLOAT_KEYW}, -#line 36 "scripts/genksyms/keywords.gperf" - {"double", DOUBLE_KEYW}, - {""}, {""}, {""}, {""}, -#line 45 "scripts/genksyms/keywords.gperf" - {"signed", SIGNED_KEYW} + {"signed", SIGNED_KEYW}, + {""}, {""}, +#line 40 "scripts/genksyms/keywords.gperf" + {"long", LONG_KEYW} }; if (len <= MAX_WORD_LENGTH && len >= MIN_WORD_LENGTH) diff --git a/scripts/genksyms/keywords.gperf b/scripts/genksyms/keywords.gperf index 8abe7ab8d88..5ef3733225f 100644 --- a/scripts/genksyms/keywords.gperf +++ b/scripts/genksyms/keywords.gperf @@ -5,8 +5,6 @@ struct resword { const char *name; int token; } EXPORT_SYMBOL, EXPORT_SYMBOL_KEYW EXPORT_SYMBOL_GPL, EXPORT_SYMBOL_KEYW EXPORT_SYMBOL_GPL_FUTURE, EXPORT_SYMBOL_KEYW -EXPORT_UNUSED_SYMBOL, EXPORT_SYMBOL_KEYW -EXPORT_UNUSED_SYMBOL_GPL, EXPORT_SYMBOL_KEYW __asm, ASM_KEYW __asm__, ASM_KEYW __attribute, ATTRIBUTE_KEYW diff --git a/scripts/kallsyms.c b/scripts/kallsyms.c index 92758120a76..ad2434b2697 100644 --- a/scripts/kallsyms.c +++ b/scripts/kallsyms.c @@ -130,9 +130,18 @@ static int read_symbol(FILE *in, struct sym_entry *s) static int symbol_valid(struct sym_entry *s) { /* Symbols which vary between passes. Passes 1 and 2 must have - * identical symbol lists. + * identical symbol lists. The kallsyms_* symbols below are only added + * after pass 1, they would be included in pass 2 when --all-symbols is + * specified so exclude them to get a stable symbol list. */ static char *special_symbols[] = { + "kallsyms_addresses", + "kallsyms_num_syms", + "kallsyms_names", + "kallsyms_markers", + "kallsyms_token_table", + "kallsyms_token_index", + /* Exclude linker generated symbols which vary between passes */ "_SDA_BASE_", /* ppc */ "_SDA2_BASE_", /* ppc */ @@ -164,9 +173,7 @@ static int symbol_valid(struct sym_entry *s) } /* Exclude symbols which vary between passes. */ - if (strstr((char *)s->sym + offset, "_compiled.") || - strncmp((char*)s->sym + offset, "__compound_literal.", 19) == 0 || - strncmp((char*)s->sym + offset, "__compound_literal$", 19) == 0) + if (strstr((char *)s->sym + offset, "_compiled.")) return 0; for (i = 0; special_symbols[i]; i++) @@ -543,10 +550,8 @@ int main(int argc, char **argv) usage(); read_map(stdin); - if (table_cnt) { - sort_symbols(); - optimize_token_table(); - } + sort_symbols(); + optimize_token_table(); write_src(); return 0; diff --git a/scripts/mksysmap b/scripts/mksysmap index 1db316a3712..6e133a0bae7 100644 --- a/scripts/mksysmap +++ b/scripts/mksysmap @@ -37,6 +37,9 @@ # readprofile starts reading symbols when _stext is found, and # continue until it finds a symbol which is not either of 'T', 't', -# 'W' or 'w'. +# 'W' or 'w'. __crc_ are 'A' and placed in the middle +# so we just ignore them to let readprofile continue to work. +# (At least sparc64 has __crc_ in the middle). + +$NM -n $1 | grep -v '\( [aNUw] \)\|\(__crc_\)\|\( \$[adt]\)' > $2 -$NM -n $1 | grep -v '\( [aNUw] \)\|\( \$[adt]\)' > $2 diff --git a/scripts/mod/file2alias.c b/scripts/mod/file2alias.c index d4dc222a74f..491b8b1b6ab 100644 --- a/scripts/mod/file2alias.c +++ b/scripts/mod/file2alias.c @@ -366,11 +366,17 @@ static void do_pnp_device_entry(void *symval, unsigned long size, for (i = 0; i < count; i++) { const char *id = (char *)devs[i].id; + char acpi_id[sizeof(devs[0].id)]; + int j; buf_printf(&mod->dev_table_buf, "MODULE_ALIAS(\"pnp:d%s*\");\n", id); + + /* fix broken pnp bus lowercasing */ + for (j = 0; j < sizeof(acpi_id); j++) + acpi_id[j] = toupper(id[j]); buf_printf(&mod->dev_table_buf, - "MODULE_ALIAS(\"acpi*:%s:*\");\n", id); + "MODULE_ALIAS(\"acpi*:%s:*\");\n", acpi_id); } } @@ -416,10 +422,17 @@ static void do_pnp_card_entries(void *symval, unsigned long size, /* add an individual alias for every device entry */ if (!dup) { + char acpi_id[sizeof(card->devs[0].id)]; + int k; + buf_printf(&mod->dev_table_buf, "MODULE_ALIAS(\"pnp:d%s*\");\n", id); + + /* fix broken pnp bus lowercasing */ + for (k = 0; k < sizeof(acpi_id); k++) + acpi_id[k] = toupper(id[k]); buf_printf(&mod->dev_table_buf, - "MODULE_ALIAS(\"acpi*:%s:*\");\n", id); + "MODULE_ALIAS(\"acpi*:%s:*\");\n", acpi_id); } } } diff --git a/scripts/strip-symbols b/scripts/strip-symbols deleted file mode 100644 index 29ee8c1a014..00000000000 --- a/scripts/strip-symbols +++ /dev/null @@ -1,22 +0,0 @@ -<*> -*.h -__compound_literal[$.][0-9]* -__crc_[a-zA-Z_]* -__exitcall_[a-zA-Z_]* -__func__[$.][0-9]* -__FUNCTION__[$.][0-9]* -gcc[0-9]_compiled[$.] -__initcall_[a-zA-Z_]* -__kcrctab_[a-zA-Z_]* -__kstrtab_[a-zA-Z_]* -__ksymtab_[a-zA-Z_]* -__mod_[a-zA-Z_]*[0-9] -__module_depends -__param_[a-zA-Z_]* -__pci_fixup_*PCI_ANY_IDPCI_ANY_ID* -__pci_fixup_*PCI_ANY_IDPCI_DEVICE_ID_* -__pci_fixup_*PCI_VENDOR_ID_*PCI_ANY_ID* -__pci_fixup_*PCI_VENDOR_ID_*PCI_DEVICE_ID_* -__PRETTY_FUNCTION__[$.][0-9]* -__setup_[a-zA-Z_]* -____versions diff --git a/security/smack/smackfs.c b/security/smack/smackfs.c index 71e2b914363..8e42800878f 100644 --- a/security/smack/smackfs.c +++ b/security/smack/smackfs.c @@ -334,7 +334,7 @@ static ssize_t smk_write_load(struct file *file, const char __user *buf, break; case 'a': case 'A': - rule.smk_access |= MAY_READ; + rule.smk_access |= MAY_APPEND; break; default: goto out; diff --git a/sound/pci/Kconfig b/sound/pci/Kconfig index 6e3a1848447..82b9bddcdcd 100644 --- a/sound/pci/Kconfig +++ b/sound/pci/Kconfig @@ -744,8 +744,8 @@ config SND_VIRTUOSO select SND_OXYGEN_LIB help Say Y here to include support for sound cards based on the - Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2, D2X and - HDAV1.3 (Deluxe). + Asus AV100/AV200 chips, i.e., Xonar D1, DX, D2 and D2X. + Support for the HDAV1.3 (Deluxe) is very experimental. To compile this driver as a module, choose M here: the module will be called snd-virtuoso. diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 82dd0843197..5d249a547fb 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -8478,6 +8478,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x1043, 0x835f, "Asus Eee 1601", ALC888_ASUS_EEE1601), SND_PCI_QUIRK(0x105b, 0x0ce8, "Foxconn P35AX-S", ALC883_6ST_DIG), SND_PCI_QUIRK(0x105b, 0x6668, "Foxconn", ALC883_6ST_DIG), + SND_PCI_QUIRK(0x1071, 0x8227, "Mitac 82801H", ALC883_MITAC), SND_PCI_QUIRK(0x1071, 0x8253, "Mitac 8252d", ALC883_MITAC), SND_PCI_QUIRK(0x1071, 0x8258, "Evesham Voyaeger", ALC883_LAPTOP_EAPD), SND_PCI_QUIRK(0x10f1, 0x2350, "TYAN-S2350", ALC888_6ST_DELL), @@ -8526,6 +8527,7 @@ static struct snd_pci_quirk alc883_cfg_tbl[] = { SND_PCI_QUIRK(0x1991, 0x5625, "Haier W66", ALC883_HAIER_W66), SND_PCI_QUIRK(0x8086, 0x0001, "DG33BUC", ALC883_3ST_6ch_INTEL), SND_PCI_QUIRK(0x8086, 0x0002, "DG33FBC", ALC883_3ST_6ch_INTEL), + SND_PCI_QUIRK(0x8086, 0x2503, "82801H", ALC883_MITAC), SND_PCI_QUIRK(0x8086, 0x0022, "DX58SO", ALC883_3ST_6ch_INTEL), SND_PCI_QUIRK(0x8086, 0xd601, "D102GGC", ALC883_3ST_6ch), {} diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index c39deebb588..3dd4eee70b7 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -81,6 +81,7 @@ enum { enum { STAC_92HD83XXX_REF, + STAC_92HD83XXX_PWR_REF, STAC_92HD83XXX_MODELS }; @@ -334,7 +335,7 @@ static hda_nid_t stac92hd83xxx_slave_dig_outs[2] = { }; static unsigned int stac92hd83xxx_pwr_mapping[4] = { - 0x03, 0x0c, 0x10, 0x40, + 0x03, 0x0c, 0x20, 0x40, }; static hda_nid_t stac92hd83xxx_amp_nids[1] = { @@ -841,10 +842,6 @@ static struct hda_verb stac92hd73xx_10ch_core_init[] = { }; static struct hda_verb stac92hd83xxx_core_init[] = { - /* start of config #1 */ - { 0xe, AC_VERB_SET_CONNECT_SEL, 0x3}, - - /* start of config #2 */ { 0xa, AC_VERB_SET_CONNECT_SEL, 0x0}, { 0xb, AC_VERB_SET_CONNECT_SEL, 0x0}, { 0xd, AC_VERB_SET_CONNECT_SEL, 0x1}, @@ -885,8 +882,8 @@ static struct hda_verb stac92hd71bxx_analog_core_init[] = { static struct hda_verb stac925x_core_init[] = { /* set dac0mux for dac converter */ { 0x06, AC_VERB_SET_CONNECT_SEL, 0x00}, - /* unmute and set max the selector */ - { 0x0e, AC_VERB_SET_AMP_GAIN_MUTE, 0xb01f }, + /* mute the master volume */ + { 0x0e, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE }, {} }; @@ -1138,6 +1135,8 @@ static struct snd_kcontrol_new stac92hd71bxx_mixer[] = { }; static struct snd_kcontrol_new stac925x_mixer[] = { + HDA_CODEC_VOLUME("Master Playback Volume", 0x0e, 0, HDA_OUTPUT), + HDA_CODEC_MUTE("Master Playback Switch", 0x0e, 0, HDA_OUTPUT), STAC_INPUT_SOURCE(1), HDA_CODEC_VOLUME("Capture Volume", 0x09, 0, HDA_OUTPUT), HDA_CODEC_MUTE("Capture Switch", 0x14, 0, HDA_OUTPUT), @@ -1736,10 +1735,12 @@ static unsigned int ref92hd83xxx_pin_configs[14] = { static unsigned int *stac92hd83xxx_brd_tbl[STAC_92HD83XXX_MODELS] = { [STAC_92HD83XXX_REF] = ref92hd83xxx_pin_configs, + [STAC_92HD83XXX_PWR_REF] = ref92hd83xxx_pin_configs, }; static const char *stac92hd83xxx_models[STAC_92HD83XXX_MODELS] = { [STAC_92HD83XXX_REF] = "ref", + [STAC_92HD83XXX_PWR_REF] = "mic-ref", }; static struct snd_pci_quirk stac92hd83xxx_cfg_tbl[] = { @@ -1799,6 +1800,8 @@ static struct snd_pci_quirk stac92hd71bxx_cfg_tbl[] = { "HP dv5", STAC_HP_M4), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f4, "HP dv7", STAC_HP_M4), + SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30f7, + "HP dv4", STAC_HP_DV5), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x30fc, "HP dv7", STAC_HP_M4), SND_PCI_QUIRK(PCI_VENDOR_ID_HP, 0x3603, @@ -3573,13 +3576,12 @@ static int stac92xx_parse_auto_config(struct hda_codec *codec, hda_nid_t dig_out err = stac92xx_auto_fill_dac_nids(codec); if (err < 0) return err; + err = stac92xx_auto_create_multi_out_ctls(codec, + &spec->autocfg); + if (err < 0) + return err; } - err = stac92xx_auto_create_multi_out_ctls(codec, &spec->autocfg); - - if (err < 0) - return err; - /* setup analog beep controls */ if (spec->anabeep_nid > 0) { err = stac92xx_auto_create_beep_ctls(codec, @@ -4753,7 +4755,9 @@ static struct hda_input_mux stac92hd83xxx_dmux = { static int patch_stac92hd83xxx(struct hda_codec *codec) { struct sigmatel_spec *spec; + hda_nid_t conn[STAC92HD83_DAC_COUNT + 1]; int err; + int num_dacs; spec = kzalloc(sizeof(*spec), GFP_KERNEL); if (spec == NULL) @@ -4772,15 +4776,16 @@ static int patch_stac92hd83xxx(struct hda_codec *codec) spec->num_pwrs = ARRAY_SIZE(stac92hd83xxx_pwr_nids); spec->multiout.dac_nids = spec->dac_nids; - spec->init = stac92hd83xxx_core_init; - switch (codec->vendor_id) { - case 0x111d7605: - break; - default: - spec->num_pwrs--; - spec->init++; /* switch to config #2 */ - } + /* set port 0xe to select the last DAC + */ + num_dacs = snd_hda_get_connections(codec, 0x0e, + conn, STAC92HD83_DAC_COUNT + 1) - 1; + + snd_hda_codec_write_cache(codec, 0xe, 0, + AC_VERB_SET_CONNECT_SEL, num_dacs); + + spec->init = stac92hd83xxx_core_init; spec->mixer = stac92hd83xxx_mixer; spec->num_pins = ARRAY_SIZE(stac92hd83xxx_pin_nids); spec->num_dmuxes = ARRAY_SIZE(stac92hd83xxx_dmux_nids); @@ -4806,6 +4811,15 @@ again: return err; } + switch (codec->vendor_id) { + case 0x111d7604: + case 0x111d7605: + if (spec->board_config == STAC_92HD83XXX_PWR_REF) + break; + spec->num_pwrs = 0; + break; + } + err = stac92xx_parse_auto_config(codec, 0x1d, 0); if (!err) { if (spec->board_config < 0) { diff --git a/sound/pci/oxygen/virtuoso.c b/sound/pci/oxygen/virtuoso.c index e9e829e83d7..18c7c91786b 100644 --- a/sound/pci/oxygen/virtuoso.c +++ b/sound/pci/oxygen/virtuoso.c @@ -683,7 +683,7 @@ static void xonar_hdav_uart_input(struct oxygen *chip) if (chip->uart_input_count >= 2 && chip->uart_input[chip->uart_input_count - 2] == 'O' && chip->uart_input[chip->uart_input_count - 1] == 'K') { - printk(KERN_DEBUG "message from Xonar HDAV HDMI chip received:"); + printk(KERN_DEBUG "message from Xonar HDAV HDMI chip received:\n"); print_hex_dump_bytes("", DUMP_PREFIX_OFFSET, chip->uart_input, chip->uart_input_count); chip->uart_input_count = 0; @@ -908,6 +908,7 @@ static const struct oxygen_model model_xonar_hdav = { .dac_channels = 8, .dac_volume_min = 0x0f, .dac_volume_max = 0xff, + .misc_flags = OXYGEN_MISC_MIDI, .function_flags = OXYGEN_FUNCTION_2WIRE, .dac_i2s_format = OXYGEN_I2S_FORMAT_LJUST, .adc_i2s_format = OXYGEN_I2S_FORMAT_LJUST, diff --git a/sound/soc/atmel/atmel-pcm.c b/sound/soc/atmel/atmel-pcm.c index 1fac5efd285..3dcdc4e3cfa 100644 --- a/sound/soc/atmel/atmel-pcm.c +++ b/sound/soc/atmel/atmel-pcm.c @@ -44,8 +44,6 @@ #include <sound/pcm_params.h> #include <sound/soc.h> -#include <mach/hardware.h> - #include "atmel-pcm.h" diff --git a/sound/soc/fsl/mpc8610_hpcd.c b/sound/soc/fsl/mpc8610_hpcd.c index bcec3f60bad..acf39a646b2 100644 --- a/sound/soc/fsl/mpc8610_hpcd.c +++ b/sound/soc/fsl/mpc8610_hpcd.c @@ -183,16 +183,6 @@ static struct snd_soc_ops mpc8610_hpcd_ops = { }; /** - * mpc8610_hpcd_machine: ASoC machine data - */ -static struct snd_soc_card mpc8610_hpcd_machine = { - .probe = mpc8610_hpcd_machine_probe, - .remove = mpc8610_hpcd_machine_remove, - .name = "MPC8610 HPCD", - .num_links = 1, -}; - -/** * mpc8610_hpcd_probe: OF probe function for the fabric driver * * This function gets called when an SSI node is found in the device tree. @@ -455,7 +445,11 @@ static int mpc8610_hpcd_probe(struct of_device *ofdev, machine_data->dai.codec_dai = &cs4270_dai; /* The codec_dai we want */ machine_data->dai.ops = &mpc8610_hpcd_ops; - mpc8610_hpcd_machine.dai_link = &machine_data->dai; + machine_data->machine.probe = mpc8610_hpcd_machine_probe; + machine_data->machine.remove = mpc8610_hpcd_machine_remove; + machine_data->machine.name = "MPC8610 HPCD"; + machine_data->machine.num_links = 1; + machine_data->machine.dai_link = &machine_data->dai; /* Allocate a new audio platform device structure */ sound_device = platform_device_alloc("soc-audio", -1); @@ -465,7 +459,7 @@ static int mpc8610_hpcd_probe(struct of_device *ofdev, goto error; } - machine_data->sound_devdata.card = &mpc8610_hpcd_machine; + machine_data->sound_devdata.card = &machine_data->machine; machine_data->sound_devdata.codec_dev = &soc_codec_device_cs4270; machine_data->machine.platform = &fsl_soc_platform; |