diff options
| -rw-r--r-- | arch/sparc/include/asm/Kbuild | 1 | ||||
| -rw-r--r-- | arch/sparc/include/asm/bpp.h | 73 | ||||
| -rw-r--r-- | arch/sparc/kernel/ebus.c | 1 | ||||
| -rw-r--r-- | arch/sparc64/kernel/ebus.c | 1 | ||||
| -rw-r--r-- | drivers/sbus/char/Kconfig | 8 | ||||
| -rw-r--r-- | drivers/sbus/char/Makefile | 1 | ||||
| -rw-r--r-- | drivers/sbus/char/bpp.c | 1055 | ||||
| -rw-r--r-- | drivers/sbus/sbus.c | 1 |
8 files changed, 0 insertions, 1141 deletions
diff --git a/arch/sparc/include/asm/Kbuild b/arch/sparc/include/asm/Kbuild index a5f0ce734ff..c314fced46d 100644 --- a/arch/sparc/include/asm/Kbuild +++ b/arch/sparc/include/asm/Kbuild @@ -22,7 +22,6 @@ header-y += unistd_64.h header-y += apc.h header-y += asi.h -header-y += bpp.h header-y += display7seg.h header-y += envctrl.h header-y += fbio.h diff --git a/arch/sparc/include/asm/bpp.h b/arch/sparc/include/asm/bpp.h deleted file mode 100644 index 31f515e499a..00000000000 --- a/arch/sparc/include/asm/bpp.h +++ /dev/null @@ -1,73 +0,0 @@ -#ifndef _SPARC_BPP_H -#define _SPARC_BPP_H - -/* - * Copyright (c) 1995 Picture Elements - * Stephen Williams - * Gus Baldauf - * - * Linux/SPARC port by Peter Zaitcev. - * Integration into SPARC tree by Tom Dyas. - */ - -#include <linux/ioctl.h> - -/* - * This is a driver that supports IEEE Std 1284-1994 communications - * with compliant or compatible devices. It will use whatever features - * the device supports, prefering those that are typically faster. - * - * When the device is opened, it is left in COMPATIBILITY mode, and - * writes work like any printer device. The driver only attempt to - * negotiate 1284 modes when needed so that plugs can be pulled, - * switch boxes switched, etc., without disrupting things. It will - * also leave the device in compatibility mode when closed. - */ - - - -/* - * This driver also supplies ioctls to manually manipulate the - * pins. This is great for testing devices, or writing code to deal - * with bizzarro-mode of the ACME Special TurboThingy Plus. - * - * NOTE: These ioctl currently do not interact well with - * read/write. Caveat emptor. - * - * PUT_PINS allows us to assign the sense of all the pins, including - * the data pins if being driven by the host. The GET_PINS returns the - * pins that the peripheral drives, including data if appropriate. - */ - -# define BPP_PUT_PINS _IOW('B', 1, int) -# define BPP_GET_PINS _IOR('B', 2, char) /* that's bogus - should've been _IO */ -# define BPP_PUT_DATA _IOW('B', 3, int) -# define BPP_GET_DATA _IOR('B', 4, char) /* ditto */ - -/* - * Set the data bus to input mode. Disengage the data bin driver and - * be prepared to read values from the peripheral. If the arg is 0, - * then revert the bus to output mode. - */ -# define BPP_SET_INPUT _IOW('B', 5, int) - -/* - * These bits apply to the PUT operation... - */ -# define BPP_PP_nStrobe 0x0001 -# define BPP_PP_nAutoFd 0x0002 -# define BPP_PP_nInit 0x0004 -# define BPP_PP_nSelectIn 0x0008 - -/* - * These apply to the GET operation, which also reads the current value - * of the previously put values. A bit mask of these will be returned - * as a bit mask in the return code of the ioctl(). - */ -# define BPP_GP_nAck 0x0100 -# define BPP_GP_Busy 0x0200 -# define BPP_GP_PError 0x0400 -# define BPP_GP_Select 0x0800 -# define BPP_GP_nFault 0x1000 - -#endif diff --git a/arch/sparc/kernel/ebus.c b/arch/sparc/kernel/ebus.c index 97294232259..7e9397fc608 100644 --- a/arch/sparc/kernel/ebus.c +++ b/arch/sparc/kernel/ebus.c @@ -20,7 +20,6 @@ #include <asm/io.h> #include <asm/oplib.h> #include <asm/prom.h> -#include <asm/bpp.h> struct linux_ebus *ebus_chain = NULL; diff --git a/arch/sparc64/kernel/ebus.c b/arch/sparc64/kernel/ebus.c index 60d36d14255..214da1bd8a5 100644 --- a/arch/sparc64/kernel/ebus.c +++ b/arch/sparc64/kernel/ebus.c @@ -21,7 +21,6 @@ #include <asm/ebus.h> #include <asm/oplib.h> #include <asm/prom.h> -#include <asm/bpp.h> #include <asm/irq.h> #include <asm/io.h> diff --git a/drivers/sbus/char/Kconfig b/drivers/sbus/char/Kconfig index 400c65bfb8c..9cd54ec63ae 100644 --- a/drivers/sbus/char/Kconfig +++ b/drivers/sbus/char/Kconfig @@ -30,14 +30,6 @@ config OBP_FLASH The OpenBoot PROM on Ultra systems is flashable. If you want to be able to upgrade the OBP firmware, say Y here. -config SUN_BPP - tristate "Bidirectional parallel port support (OBSOLETE)" - depends on EXPERIMENTAL - help - Say Y here to support Sun's obsolete variant of IEEE1284 - bidirectional parallel port protocol as /dev/bppX. Can be built on - x86 machines. - config SUN_VIDEOPIX tristate "Videopix Frame Grabber (EXPERIMENTAL)" depends on EXPERIMENTAL && (BROKEN || !64BIT) diff --git a/drivers/sbus/char/Makefile b/drivers/sbus/char/Makefile index 7ab060e9a5f..d8b2d0c0ebd 100644 --- a/drivers/sbus/char/Makefile +++ b/drivers/sbus/char/Makefile @@ -17,7 +17,6 @@ obj-$(CONFIG_WATCHDOG_RIO) += riowatchdog.o obj-$(CONFIG_OBP_FLASH) += flash.o obj-$(CONFIG_SUN_OPENPROMIO) += openprom.o obj-$(CONFIG_SUN_MOSTEK_RTC) += rtc.o -obj-$(CONFIG_SUN_BPP) += bpp.o obj-$(CONFIG_SUN_VIDEOPIX) += vfc.o obj-$(CONFIG_TADPOLE_TS102_UCTRL) += uctrl.o obj-$(CONFIG_SUN_JSFLASH) += jsflash.o diff --git a/drivers/sbus/char/bpp.c b/drivers/sbus/char/bpp.c deleted file mode 100644 index bba21e053a1..00000000000 --- a/drivers/sbus/char/bpp.c +++ /dev/null @@ -1,1055 +0,0 @@ -/* - * drivers/sbus/char/bpp.c - * - * Copyright (c) 1995 Picture Elements - * Stephen Williams (steve@icarus.com) - * Gus Baldauf (gbaldauf@ix.netcom.com) - * - * Linux/SPARC port by Peter Zaitcev. - * Integration into SPARC tree by Tom Dyas. - */ - - -#include <linux/kernel.h> -#include <linux/module.h> -#include <linux/fs.h> -#include <linux/errno.h> -#include <linux/sched.h> -#include <linux/spinlock.h> -#include <linux/timer.h> -#include <linux/ioport.h> -#include <linux/major.h> -#include <linux/smp_lock.h> - -#include <asm/uaccess.h> -#include <asm/io.h> - -#if defined(__i386__) -# include <asm/system.h> -#endif - -#if defined(__sparc__) -# include <linux/init.h> -# include <linux/delay.h> /* udelay() */ - -# include <asm/oplib.h> /* OpenProm Library */ -# include <asm/sbus.h> -#endif - -#include <asm/bpp.h> - -#define BPP_PROBE_CODE 0x55 -#define BPP_DELAY 100 - -static const unsigned BPP_MAJOR = LP_MAJOR; -static const char *bpp_dev_name = "bpp"; - -/* When switching from compatibility to a mode where I can read, try - the following mode first. */ - -/* const unsigned char DEFAULT_ECP = 0x10; */ -static const unsigned char DEFAULT_ECP = 0x30; -static const unsigned char DEFAULT_NIBBLE = 0x00; - -/* - * These are 1284 time constraints, in units of jiffies. - */ - -static const unsigned long TIME_PSetup = 1; -static const unsigned long TIME_PResponse = 6; -static const unsigned long TIME_IDLE_LIMIT = 2000; - -/* - * One instance per supported subdevice... - */ -# define BPP_NO 3 - -enum IEEE_Mode { COMPATIBILITY, NIBBLE, ECP, ECP_RLE, EPP }; - -struct inst { - unsigned present : 1; /* True if the hardware exists */ - unsigned enhanced : 1; /* True if the hardware in "enhanced" */ - unsigned opened : 1; /* True if the device is opened already */ - unsigned run_flag : 1; /* True if waiting for a repeate byte */ - - unsigned char direction; /* 0 --> out, 0x20 --> IN */ - unsigned char pp_state; /* State of host controlled pins. */ - enum IEEE_Mode mode; - - unsigned char run_length; - unsigned char repeat_byte; -}; - -static struct inst instances[BPP_NO]; - -#if defined(__i386__) - -static const unsigned short base_addrs[BPP_NO] = { 0x278, 0x378, 0x3bc }; - -/* - * These are for data access. - * Control lines accesses are hidden in set_bits() and get_bits(). - * The exception is the probe procedure, which is system-dependent. - */ -#define bpp_outb_p(data, base) outb_p((data), (base)) -#define bpp_inb(base) inb(base) -#define bpp_inb_p(base) inb_p(base) - -/* - * This method takes the pin values mask and sets the hardware pins to - * the requested value: 1 == high voltage, 0 == low voltage. This - * burries the annoying PC bit inversion and preserves the direction - * flag. - */ -static void set_pins(unsigned short pins, unsigned minor) -{ - unsigned char bits = instances[minor].direction; /* == 0x20 */ - - if (! (pins & BPP_PP_nStrobe)) bits |= 1; - if (! (pins & BPP_PP_nAutoFd)) bits |= 2; - if ( pins & BPP_PP_nInit) bits |= 4; - if (! (pins & BPP_PP_nSelectIn)) bits |= 8; - - instances[minor].pp_state = bits; - - outb_p(bits, base_addrs[minor]+2); -} - -static unsigned short get_pins(unsigned minor) -{ - unsigned short bits = 0; - - unsigned value = instances[minor].pp_state; - if (! (value & 0x01)) bits |= BPP_PP_nStrobe; - if (! (value & 0x02)) bits |= BPP_PP_nAutoFd; - if (value & 0x04) bits |= BPP_PP_nInit; - if (! (value & 0x08)) bits |= BPP_PP_nSelectIn; - - value = inb_p(base_addrs[minor]+1); - if (value & 0x08) bits |= BPP_GP_nFault; - if (value & 0x10) bits |= BPP_GP_Select; - if (value & 0x20) bits |= BPP_GP_PError; - if (value & 0x40) bits |= BPP_GP_nAck; - if (! (value & 0x80)) bits |= BPP_GP_Busy; - - return bits; -} - -#endif /* __i386__ */ - -#if defined(__sparc__) - -/* - * Register block - */ - /* DMA registers */ -#define BPP_CSR 0x00 -#define BPP_ADDR 0x04 -#define BPP_BCNT 0x08 -#define BPP_TST_CSR 0x0C - /* Parallel Port registers */ -#define BPP_HCR 0x10 -#define BPP_OCR 0x12 -#define BPP_DR 0x14 -#define BPP_TCR 0x15 -#define BPP_OR 0x16 -#define BPP_IR 0x17 -#define BPP_ICR 0x18 -#define BPP_SIZE 0x1A - -/* BPP_CSR. Bits of type RW1 are cleared with writing '1'. */ -#define P_DEV_ID_MASK 0xf0000000 /* R */ -#define P_DEV_ID_ZEBRA 0x40000000 -#define P_DEV_ID_L64854 0xa0000000 /* == NCR 89C100+89C105. Pity. */ -#define P_NA_LOADED 0x08000000 /* R NA wirtten but was not used */ -#define P_A_LOADED 0x04000000 /* R */ -#define P_DMA_ON 0x02000000 /* R DMA is not disabled */ -#define P_EN_NEXT 0x01000000 /* RW */ -#define P_TCI_DIS 0x00800000 /* RW TCI forbidden from interrupts */ -#define P_DIAG 0x00100000 /* RW Disables draining and resetting - of P-FIFO on loading of P_ADDR*/ -#define P_BURST_SIZE 0x000c0000 /* RW SBus burst size */ -#define P_BURST_8 0x00000000 -#define P_BURST_4 0x00040000 -#define P_BURST_1 0x00080000 /* "No burst" write */ -#define P_TC 0x00004000 /* RW1 Term Count, can be cleared when - P_EN_NEXT=1 */ -#define P_EN_CNT 0x00002000 /* RW */ -#define P_EN_DMA 0x00000200 /* RW */ -#define P_WRITE 0x00000100 /* R DMA dir, 1=to ram, 0=to port */ -#define P_RESET 0x00000080 /* RW */ -#define P_SLAVE_ERR 0x00000040 /* RW1 Access size error */ -#define P_INVALIDATE 0x00000020 /* W Drop P-FIFO */ -#define P_INT_EN 0x00000010 /* RW OK to P_INT_PEND||P_ERR_PEND */ -#define P_DRAINING 0x0000000c /* R P-FIFO is draining to memory */ -#define P_ERR_PEND 0x00000002 /* R */ -#define P_INT_PEND 0x00000001 /* R */ - -/* BPP_HCR. Time is in increments of SBus clock. */ -#define P_HCR_TEST 0x8000 /* Allows buried counters to be read */ -#define P_HCR_DSW 0x7f00 /* Data strobe width (in ticks) */ -#define P_HCR_DDS 0x007f /* Data setup before strobe (in ticks) */ - -/* BPP_OCR. */ -#define P_OCR_MEM_CLR 0x8000 -#define P_OCR_DATA_SRC 0x4000 /* ) */ -#define P_OCR_DS_DSEL 0x2000 /* ) Bidirectional */ -#define P_OCR_BUSY_DSEL 0x1000 /* ) selects */ -#define P_OCR_ACK_DSEL 0x0800 /* ) */ -#define P_OCR_EN_DIAG 0x0400 -#define P_OCR_BUSY_OP 0x0200 /* Busy operation */ -#define P_OCR_ACK_OP 0x0100 /* Ack operation */ -#define P_OCR_SRST 0x0080 /* Reset state machines. Not selfcleaning. */ -#define P_OCR_IDLE 0x0008 /* PP data transfer state machine is idle */ -#define P_OCR_V_ILCK 0x0002 /* Versatec faded. Zebra only. */ -#define P_OCR_EN_VER 0x0001 /* Enable Versatec (0 - enable). Zebra only. */ - -/* BPP_TCR */ -#define P_TCR_DIR 0x08 -#define P_TCR_BUSY 0x04 -#define P_TCR_ACK 0x02 -#define P_TCR_DS 0x01 /* Strobe */ - -/* BPP_OR */ -#define P_OR_V3 0x20 /* ) */ -#define P_OR_V2 0x10 /* ) on Zebra only */ -#define P_OR_V1 0x08 /* ) */ -#define P_OR_INIT 0x04 -#define P_OR_AFXN 0x02 /* Auto Feed */ -#define P_OR_SLCT_IN 0x01 - -/* BPP_IR */ -#define P_IR_PE 0x04 -#define P_IR_SLCT 0x02 -#define P_IR_ERR 0x01 - -/* BPP_ICR */ -#define P_DS_IRQ 0x8000 /* RW1 */ -#define P_ACK_IRQ 0x4000 /* RW1 */ -#define P_BUSY_IRQ 0x2000 /* RW1 */ -#define P_PE_IRQ 0x1000 /* RW1 */ -#define P_SLCT_IRQ 0x0800 /* RW1 */ -#define P_ERR_IRQ 0x0400 /* RW1 */ -#define P_DS_IRQ_EN 0x0200 /* RW Always on rising edge */ -#define P_ACK_IRQ_EN 0x0100 /* RW Always on rising edge */ -#define P_BUSY_IRP 0x0080 /* RW 1= rising edge */ -#define P_BUSY_IRQ_EN 0x0040 /* RW */ -#define P_PE_IRP 0x0020 /* RW 1= rising edge */ -#define P_PE_IRQ_EN 0x0010 /* RW */ -#define P_SLCT_IRP 0x0008 /* RW 1= rising edge */ -#define P_SLCT_IRQ_EN 0x0004 /* RW */ -#define P_ERR_IRP 0x0002 /* RW1 1= rising edge */ -#define P_ERR_IRQ_EN 0x0001 /* RW */ - -static void __iomem *base_addrs[BPP_NO]; - -#define bpp_outb_p(data, base) sbus_writeb(data, (base) + BPP_DR) -#define bpp_inb_p(base) sbus_readb((base) + BPP_DR) -#define bpp_inb(base) sbus_readb((base) + BPP_DR) - -static void set_pins(unsigned short pins, unsigned minor) -{ - void __iomem *base = base_addrs[minor]; - unsigned char bits_tcr = 0, bits_or = 0; - - if (instances[minor].direction & 0x20) bits_tcr |= P_TCR_DIR; - if ( pins & BPP_PP_nStrobe) bits_tcr |= P_TCR_DS; - - if ( pins & BPP_PP_nAutoFd) bits_or |= P_OR_AFXN; - if (! (pins & BPP_PP_nInit)) bits_or |= P_OR_INIT; - if (! (pins & BPP_PP_nSelectIn)) bits_or |= P_OR_SLCT_IN; - - sbus_writeb(bits_or, base + BPP_OR); - sbus_writeb(bits_tcr, base + BPP_TCR); -} - -/* - * i386 people read output pins from a software image. - * We may get them back from hardware. - * Again, inversion of pins must he buried here. - */ -static unsigned short get_pins(unsigned minor) -{ - void __iomem *base = base_addrs[minor]; - unsigned short bits = 0; - unsigned value_tcr = sbus_readb(base + BPP_TCR); - unsigned value_ir = sbus_readb(base + BPP_IR); - unsigned value_or = sbus_readb(base + BPP_OR); - - if (value_tcr & P_TCR_DS) bits |= BPP_PP_nStrobe; - if (value_or & P_OR_AFXN) bits |= BPP_PP_nAutoFd; - if (! (value_or & P_OR_INIT)) bits |= BPP_PP_nInit; - if (! (value_or & P_OR_SLCT_IN)) bits |= BPP_PP_nSelectIn; - - if (value_ir & P_IR_ERR) bits |= BPP_GP_nFault; - if (! (value_ir & P_IR_SLCT)) bits |= BPP_GP_Select; - if (! (value_ir & P_IR_PE)) bits |= BPP_GP_PError; - if (! (value_tcr & P_TCR_ACK)) bits |= BPP_GP_nAck; - if (value_tcr & P_TCR_BUSY) bits |= BPP_GP_Busy; - - return bits; -} - -#endif /* __sparc__ */ - -static void snooze(unsigned long snooze_time, unsigned minor) -{ - schedule_timeout_uninterruptible(snooze_time + 1); -} - -static int wait_for(unsigned short set, unsigned short clr, - unsigned long delay, unsigned minor) -{ - unsigned short pins = get_pins(minor); - - unsigned long extime = 0; - - /* - * Try a real fast scan for the first jiffy, in case the device - * responds real good. The first while loop guesses an expire - * time accounting for possible wraparound of jiffies. - */ - while (time_after_eq(jiffies, extime)) extime = jiffies + 1; - while ( (time_before(jiffies, extime)) - && (((pins & set) != set) || ((pins & clr) != 0)) ) { - pins = get_pins(minor); - } - - delay -= 1; - - /* - * If my delay expired or the pins are still not where I want - * them, then resort to using the timer and greatly reduce my - * sample rate. If the peripheral is going to be slow, this will - * give the CPU up to some more worthy process. - */ - while ( delay && (((pins & set) != set) || ((pins & clr) != 0)) ) { - - snooze(1, minor); - pins = get_pins(minor); - delay -= 1; - } - - if (delay == 0) return -1; - else return pins; -} - -/* - * Return ZERO(0) If the negotiation succeeds, an errno otherwise. An - * errno means something broke, and I do not yet know how to fix it. - */ -static int negotiate(unsigned char mode, unsigned minor) -{ - int rc; - unsigned short pins = get_pins(minor); - if (pins & BPP_PP_nSelectIn) return -EIO; - - - /* Event 0: Write the mode to the data lines */ - bpp_outb_p(mode, base_addrs[minor]); - - snooze(TIME_PSetup, minor); - - /* Event 1: Strobe the mode code into the peripheral */ - set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nInit, minor); - - /* Wait for Event 2: Peripheral responds as a 1284 device. */ - rc = wait_for(BPP_GP_PError|BPP_GP_Select|BPP_GP_nFault, - BPP_GP_nAck, - TIME_PResponse, - minor); - - if (rc == -1) return -ETIMEDOUT; - - /* Event 3: latch extensibility request */ - set_pins(BPP_PP_nSelectIn|BPP_PP_nInit, minor); - - /* ... quick nap while peripheral ponders the byte i'm sending...*/ - snooze(1, minor); - - /* Event 4: restore strobe, to ACK peripheral's response. */ - set_pins(BPP_PP_nSelectIn|BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor); - - /* Wait for Event 6: Peripheral latches response bits */ - rc = wait_for(BPP_GP_nAck, 0, TIME_PSetup+TIME_PResponse, minor); - if (rc == -1) return -EIO; - - /* A 1284 device cannot refuse nibble mode */ - if (mode == DEFAULT_NIBBLE) return 0; - - if (pins & BPP_GP_Select) return 0; - - return -EPROTONOSUPPORT; -} - -static int terminate(unsigned minor) -{ - int rc; - - /* Event 22: Request termination of 1284 mode */ - set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor); - - /* Wait for Events 23 and 24: ACK termination request. */ - rc = wait_for(BPP_GP_Busy|BPP_GP_nFault, - BPP_GP_nAck, - TIME_PSetup+TIME_PResponse, - minor); - - instances[minor].direction = 0; - instances[minor].mode = COMPATIBILITY; - - if (rc == -1) { - return -EIO; - } - - /* Event 25: Handshake by lowering nAutoFd */ - set_pins(BPP_PP_nStrobe|BPP_PP_nInit, minor); - - /* Event 26: Peripheral wiggles lines... */ - - /* Event 27: Peripheral sets nAck HIGH to ack handshake */ - rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor); - if (rc == -1) { - set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor); - return -EIO; - } - - /* Event 28: Finish phase by raising nAutoFd */ - set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, minor); - - return 0; -} - -static DEFINE_SPINLOCK(bpp_open_lock); - -/* - * Allow only one process to open the device at a time. - */ -static int bpp_open(struct inode *inode, struct file *f) -{ - unsigned minor = iminor(inode); - int ret; - - lock_kernel(); - spin_lock(&bpp_open_lock); - ret = 0; - if (minor >= BPP_NO) { - ret = -ENODEV; - } else { - if (! instances[minor].present) { - ret = -ENODEV; - } else { - if (instances[minor].opened) - ret = -EBUSY; - else - instances[minor].opened = 1; - } - } - spin_unlock(&bpp_open_lock); - unlock_kernel(); - - return ret; -} - -/* - * When the process closes the device, this method is called to clean - * up and reset the hardware. Always leave the device in compatibility - * mode as this is a reasonable place to clean up from messes made by - * ioctls, or other mayhem. - */ -static int bpp_release(struct inode *inode, struct file *f) -{ - unsigned minor = iminor(inode); - - spin_lock(&bpp_open_lock); - instances[minor].opened = 0; - - if (instances[minor].mode != COMPATIBILITY) - terminate(minor); - - spin_unlock(&bpp_open_lock); - - return 0; -} - -static long read_nibble(unsigned minor, char __user *c, unsigned long cnt) -{ - unsigned long remaining = cnt; - long rc; - - while (remaining > 0) { - unsigned char byte = 0; - int pins; - - /* Event 7: request nibble */ - set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe, minor); - - /* Wait for event 9: Peripher strobes first nibble */ - pins = wait_for(0, BPP_GP_nAck, TIME_IDLE_LIMIT, minor); - if (pins == -1) return -ETIMEDOUT; - - /* Event 10: I handshake nibble */ - set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nAutoFd, minor); - if (pins & BPP_GP_nFault) byte |= 0x01; - if (pins & BPP_GP_Select) byte |= 0x02; - if (pins & BPP_GP_PError) byte |= 0x04; - if (pins & BPP_GP_Busy) byte |= 0x08; - - /* Wait for event 11: Peripheral handshakes nibble */ - rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor); - - /* Event 7: request nibble */ - set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe, minor); - - /* Wait for event 9: Peripher strobes first nibble */ - pins = wait_for(0, BPP_GP_nAck, TIME_PResponse, minor); - if (rc == -1) return -ETIMEDOUT; - - /* Event 10: I handshake nibble */ - set_pins(BPP_PP_nSelectIn|BPP_PP_nStrobe|BPP_PP_nAutoFd, minor); - if (pins & BPP_GP_nFault) byte |= 0x10; - if (pins & BPP_GP_Select) byte |= 0x20; - if (pins & BPP_GP_PError) byte |= 0x40; - if (pins & BPP_GP_Busy) byte |= 0x80; - - if (put_user(byte, c)) - return -EFAULT; - c += 1; - remaining -= 1; - - /* Wait for event 11: Peripheral handshakes nibble */ - rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor); - if (rc == -1) return -EIO; - } - - return cnt - remaining; -} - -static long read_ecp(unsigned minor, char __user *c, unsigned long cnt) -{ - unsigned long remaining; - long rc; - - /* Turn ECP mode from forward to reverse if needed. */ - if (! instances[minor].direction) { - unsigned short pins = get_pins(minor); - - /* Event 38: Turn the bus around */ - instances[minor].direction = 0x20; - pins &= ~BPP_PP_nAutoFd; - set_pins(pins, minor); - - /* Event 39: Set pins for reverse mode. */ - snooze(TIME_PSetup, minor); - set_pins(BPP_PP_nStrobe|BPP_PP_nSelectIn, minor); - - /* Wait for event 40: Peripheral ready to be strobed */ - rc = wait_for(0, BPP_GP_PError, TIME_PResponse, minor); - if (rc == -1) return -ETIMEDOUT; - } - - remaining = cnt; - - while (remaining > 0) { - - /* If there is a run length for a repeated byte, repeat */ - /* that byte a few times. */ - if (instances[minor].run_length && !instances[minor].run_flag) { - - char buffer[128]; - unsigned idx; - unsigned repeat = remaining < instances[minor].run_length - ? remaining - : instances[minor].run_length; - - for (idx = 0 ; idx < repeat ; idx += 1) - buffer[idx] = instances[minor].repeat_byte; - - if (copy_to_user(c, buffer, repeat)) - return -EFAULT; - remaining -= repeat; - c += repeat; - instances[minor].run_length -= repeat; - } - - if (remaining == 0) break; - - - /* Wait for Event 43: Data active on the bus. */ - rc = wait_for(0, BPP_GP_nAck, TIME_IDLE_LIMIT, minor); - if (rc == -1) break; - - if (rc & BPP_GP_Busy) { - /* OK, this is data. read it in. */ - unsigned char byte = bpp_inb(base_addrs[minor]); - if (put_user(byte, c)) - return -EFAULT; - c += 1; - remaining -= 1; - - if (instances[minor].run_flag) { - instances[minor].repeat_byte = byte; - instances[minor].run_flag = 0; - } - - } else { - unsigned char byte = bpp_inb(base_addrs[minor]); - if (byte & 0x80) { - printk("bpp%d: " - "Ignoring ECP channel %u from device.\n", - minor, byte & 0x7f); - } else { - instances[minor].run_length = byte; - instances[minor].run_flag = 1; - } - } - - /* Event 44: I got it. */ - set_pins(BPP_PP_nStrobe|BPP_PP_nAutoFd|BPP_PP_nSelectIn, minor); - - /* Wait for event 45: peripheral handshake */ - rc = wait_for(BPP_GP_nAck, 0, TIME_PResponse, minor); - if (rc == -1) return -ETIMEDOUT; - - /* Event 46: Finish handshake */ - set_pins(BPP_PP_nStrobe|BPP_PP_nSelectIn, minor); - - } - - - return cnt - remaining; -} - -static ssize_t bpp_read(struct file *f, char __user *c, size_t cnt, loff_t * ppos) -{ - long rc; - unsigned minor = iminor(f->f_path.dentry->d_inode); - if (minor >= BPP_NO) return -ENODEV; - if (!instances[minor].present) return -ENODEV; - - switch (instances[minor].mode) { - - default: - if (instances[minor].mode != COMPATIBILITY) - terminate(minor); - - if (instances[minor].enhanced) { - /* For now, do all reads with ECP-RLE mode */ - unsigned short pins; - - rc = negotiate(DEFAULT_ECP, minor); - if (rc < 0) break; - - instances[minor].mode = ECP_RLE; - - /* Event 30: set nAutoFd low to setup for ECP mode */ - pins = get_pins(minor); - pins &= ~BPP_PP_nAutoFd; - set_pins(pins, minor); - - /* Wait for Event 31: peripheral ready */ - rc = wait_for(BPP_GP_PError, 0, TIME_PResponse, minor); - if (rc == -1) return -ETIMEDOUT; - - rc = read_ecp(minor, c, cnt); - - } else { - rc = negotiate(DEFAULT_NIBBLE, minor); - if (rc < 0) break; - - instances[minor].mode = NIBBLE; - - rc = read_nibble(minor, c, cnt); - } - break; - - case NIBBLE: - rc = read_nibble(minor, c, cnt); - break; - - case ECP: - case ECP_RLE: - rc = read_ecp(minor, c, cnt); - break; - - } - - - return rc; -} - -/* - * Compatibility mode handshaking is a matter of writing data, - * strobing it, and waiting for the printer to stop being busy. - */ -static long write_compat(unsigned minor, const char __user *c, unsigned long cnt) -{ - long rc; - unsigned short pins = get_pins(minor); - - unsigned long remaining = cnt; - - - while (remaining > 0) { - unsigned char byte; - - if (get_user(byte, c)) - return -EFAULT; - c += 1; - - rc = wait_for(BPP_GP_nAck, BPP_GP_Busy, TIME_IDLE_LIMIT, minor); - if (rc == -1) return -ETIMEDOUT; - - bpp_outb_p(byte, base_addrs[minor]); - remaining -= 1; - /* snooze(1, minor); */ - - pins &= ~BPP_PP_nStrobe; - set_pins(pins, minor); - - rc = wait_for(BPP_GP_Busy, 0, TIME_PResponse, minor); - - pins |= BPP_PP_nStrobe; - set_pins(pins, minor); - } - - return cnt - remaining; -} - -/* - * Write data using ECP mode. Watch out that the port may be set up - * for reading. If so, turn the port around. - */ -static long write_ecp(unsigned minor, const char __user *c, unsigned long cnt) -{ - unsigned short pins = get_pins(minor); - unsigned long remaining = cnt; - - if (instances[minor].direction) { - int rc; - - /* Event 47 Request bus be turned around */ - pins |= BPP_PP_nInit; - set_pins(pins, minor); - - /* Wait for Event 49: Peripheral relinquished bus */ - rc = wait_for(BPP_GP_PError, 0, TIME_PResponse, minor); - - pins |= BPP_PP_nAutoFd; - instances[minor].direction = 0; - set_pins(pins, minor); - } - - while (remaining > 0) { - unsigned char byte; - int rc; - - if (get_user(byte, c)) - return -EFAULT; - - rc = wait_for(0, BPP_GP_Busy, TIME_PResponse, minor); - if (rc == -1) return -ETIMEDOUT; - - c += 1; - - bpp_outb_p(byte, base_addrs[minor]); - - pins &= ~BPP_PP_nStrobe; - set_pins(pins, minor); - - pins |= BPP_PP_nStrobe; - rc = wait_for(BPP_GP_Busy, 0, TIME_PResponse, minor); - if (rc == -1) return -EIO; - - set_pins(pins, minor); - } - - return cnt - remaining; -} - -/* - * Write to the peripheral. Be sensitive of the current mode. If I'm - * in a mode that can be turned around (ECP) then just do - * that. Otherwise, terminate and do my writing in compat mode. This - * is the safest course as any device can handle it. - */ -static ssize_t bpp_write(struct file *f, const char __user *c, size_t cnt, loff_t * ppos) -{ - long errno = 0; - unsigned minor = iminor(f->f_path.dentry->d_inode); - if (minor >= BPP_NO) return -ENODEV; - if (!instances[minor].present) return -ENODEV; - - switch (instances[minor].mode) { - - case ECP: - case ECP_RLE: - errno = write_ecp(minor, c, cnt); - break; - case COMPATIBILITY: - errno = write_compat(minor, c, cnt); - break; - default: - terminate(minor); - errno = write_compat(minor, c, cnt); - } - - return errno; -} - -static int bpp_ioctl(struct inode *inode, struct file *f, unsigned int cmd, - unsigned long arg) -{ - int errno = 0; - - unsigned minor = iminor(inode); - if (minor >= BPP_NO) return -ENODEV; - if (!instances[minor].present) return -ENODEV; - - - switch (cmd) { - - case BPP_PUT_PINS: - set_pins(arg, minor); - break; - - case BPP_GET_PINS: - errno = get_pins(minor); - break; - - case BPP_PUT_DATA: - bpp_outb_p(arg, base_addrs[minor]); - break; - - case BPP_GET_DATA: - errno = bpp_inb_p(base_addrs[minor]); - break; - - case BPP_SET_INPUT: - if (arg) - if (instances[minor].enhanced) { - unsigned short bits = get_pins(minor); - instances[minor].direction = 0x20; - set_pins(bits, minor); - } else { - errno = -ENOTTY; - } - else { - unsigned short bits = get_pins(minor); - instances[minor].direction = 0x00; - set_pins(bits, minor); - } - break; - - default: - errno = -EINVAL; - } - - return errno; -} - -static const struct file_operations bpp_fops = { - .owner = THIS_MODULE, - .read = bpp_read, - .write = bpp_write, - .ioctl = bpp_ioctl, - .open = bpp_open, - .release = bpp_release, -}; - -#if defined(__i386__) - -#define collectLptPorts() {} - -static void probeLptPort(unsigned idx) -{ - unsigned int testvalue; - const unsigned short lpAddr = base_addrs[idx]; - - instances[idx].present = 0; - instances[idx].enhanced = 0; - instances[idx].direction = 0; - instances[idx].mode = COMPATIBILITY; - instances[idx].run_length = 0; - instances[idx].run_flag = 0; - if (!request_region(lpAddr,3, bpp_dev_name)) return; - - /* - * First, make sure the instance exists. Do this by writing to - * the data latch and reading the value back. If the port *is* - * present, test to see if it supports extended-mode - * operation. This will be required for IEEE1284 reverse - * transfers. - */ - - outb_p(BPP_PROBE_CODE, lpAddr); - for (testvalue=0; testvalue<BPP_DELAY; testvalue++) - ; - testvalue = inb_p(lpAddr); - if (testvalue == BPP_PROBE_CODE) { - unsigned save; - instances[idx].present = 1; - - save = inb_p(lpAddr+2); - for (testvalue=0; testvalue<BPP_DELAY; testvalue++) - ; - outb_p(save|0x20, lpAddr+2); - for (testvalue=0; testvalue<BPP_DELAY; testvalue++) - ; - outb_p(~BPP_PROBE_CODE, lpAddr); - for (testvalue=0; testvalue<BPP_DELAY; testvalue++) - ; - testvalue = inb_p(lpAddr); - if ((testvalue&0xff) == (0xff&~BPP_PROBE_CODE)) - instances[idx].enhanced = 0; - else - instances[idx].enhanced = 1; - outb_p(save, lpAddr+2); - } - else { - release_region(lpAddr,3); - } - /* - * Leave the port in compat idle mode. - */ - set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, idx); - - printk("bpp%d: Port at 0x%03x: Enhanced mode %s\n", idx, base_addrs[idx], - instances[idx].enhanced? "SUPPORTED" : "UNAVAILABLE"); -} - -static inline void freeLptPort(int idx) -{ - release_region(base_addrs[idx], 3); -} - -#endif - -#if defined(__sparc__) - -static void __iomem *map_bpp(struct sbus_dev *dev, int idx) -{ - return sbus_ioremap(&dev->resource[0], 0, BPP_SIZE, "bpp"); -} - -static int collectLptPorts(void) -{ - struct sbus_bus *bus; - struct sbus_dev *dev; - int count; - - count = 0; - for_all_sbusdev(dev, bus) { - if (strcmp(dev->prom_name, "SUNW,bpp") == 0) { - if (count >= BPP_NO) { - printk(KERN_NOTICE - "bpp: More than %d bpp ports," - " rest is ignored\n", BPP_NO); - return count; - } - base_addrs[count] = map_bpp(dev, count); - count++; - } - } - return count; -} - -static void probeLptPort(unsigned idx) -{ - void __iomem *rp = base_addrs[idx]; - __u32 csr; - char *brand; - - instances[idx].present = 0; - instances[idx].enhanced = 0; - instances[idx].direction = 0; - instances[idx].mode = COMPATIBILITY; - instances[idx].run_length = 0; - instances[idx].run_flag = 0; - - if (!rp) return; - - instances[idx].present = 1; - instances[idx].enhanced = 1; /* Sure */ - - csr = sbus_readl(rp + BPP_CSR); - if ((csr & P_DRAINING) != 0 && (csr & P_ERR_PEND) == 0) { - udelay(20); - csr = sbus_readl(rp + BPP_CSR); - if ((csr & P_DRAINING) != 0 && (csr & P_ERR_PEND) == 0) { - printk("bpp%d: DRAINING still active (0x%08x)\n", idx, csr); - } - } - printk("bpp%d: reset with 0x%08x ..", idx, csr); - sbus_writel((csr | P_RESET) & ~P_INT_EN, rp + BPP_CSR); - udelay(500); - sbus_writel(sbus_readl(rp + BPP_CSR) & ~P_RESET, rp + BPP_CSR); - csr = sbus_readl(rp + BPP_CSR); - printk(" done with csr=0x%08x ocr=0x%04x\n", - csr, sbus_readw(rp + BPP_OCR)); - - switch (csr & P_DEV_ID_MASK) { - case P_DEV_ID_ZEBRA: - brand = "Zebra"; - break; - case P_DEV_ID_L64854: - brand = "DMA2"; - break; - default: - brand = "Unknown"; - } - printk("bpp%d: %s at %p\n", idx, brand, rp); - - /* - * Leave the port in compat idle mode. - */ - set_pins(BPP_PP_nAutoFd|BPP_PP_nStrobe|BPP_PP_nInit, idx); - - return; -} - -static inline void freeLptPort(int idx) -{ - sbus_iounmap(base_addrs[idx], BPP_SIZE); -} - -#endif - -static int __init bpp_init(void) -{ - int rc; - unsigned idx; - - rc = collectLptPorts(); - if (rc == 0) - return -ENODEV; - - rc = register_chrdev(BPP_MAJOR, bpp_dev_name, &bpp_fops); - if (rc < 0) - return rc; - - for (idx = 0; idx < BPP_NO; idx++) { - instances[idx].opened = 0; - probeLptPort(idx); - } - - return 0; -} - -static void __exit bpp_cleanup(void) -{ - unsigned idx; - - unregister_chrdev(BPP_MAJOR, bpp_dev_name); - - for (idx = 0; idx < BPP_NO; idx++) { - if (instances[idx].present) - freeLptPort(idx); - } -} - -module_init(bpp_init); -module_exit(bpp_cleanup); - -MODULE_LICENSE("GPL"); - diff --git a/drivers/sbus/sbus.c b/drivers/sbus/sbus.c index 9c129248466..53e5e7bf545 100644 --- a/drivers/sbus/sbus.c +++ b/drivers/sbus/sbus.c @@ -14,7 +14,6 @@ #include <asm/dma.h> #include <asm/oplib.h> #include <asm/prom.h> -#include <asm/bpp.h> #include <asm/irq.h> static ssize_t |