diff options
43 files changed, 965 insertions, 484 deletions
diff --git a/arch/m68knommu/Kconfig b/arch/m68knommu/Kconfig index f52c627bdad..f4b582cbb56 100644 --- a/arch/m68knommu/Kconfig +++ b/arch/m68knommu/Kconfig @@ -451,6 +451,12 @@ config MOD5272 help Support for the Netburner MOD-5272 board. +config SAVANTrosie1 + bool "Savant Rosie1 board support" + depends on M523x + help + Support for the Savant Rosie1 board. + config ROMFS_FROM_ROM bool "ROMFS image not RAM resident" depends on (NETtel || SNAPGEAR) @@ -492,7 +498,12 @@ config SNEHA bool default y depends on CPU16B - + +config SAVANT + bool + default y + depends on SAVANTrosie1 + config AVNET bool default y diff --git a/arch/m68knommu/Makefile b/arch/m68knommu/Makefile index 92227aaaa26..30aa2553693 100644 --- a/arch/m68knommu/Makefile +++ b/arch/m68knommu/Makefile @@ -48,6 +48,7 @@ board-$(CONFIG_SNEHA) := SNEHA board-$(CONFIG_M5208EVB) := M5208EVB board-$(CONFIG_MOD5272) := MOD5272 board-$(CONFIG_AVNET) := AVNET +board-$(CONFIG_SAVANT) := SAVANT BOARD := $(board-y) model-$(CONFIG_RAMKERNEL) := ram @@ -117,4 +118,4 @@ core-y += arch/m68knommu/kernel/ \ libs-y += arch/m68knommu/lib/ archclean: - $(Q)$(MAKE) $(clean)=arch/m68knommu/boot + diff --git a/arch/m68knommu/defconfig b/arch/m68knommu/defconfig index 3891de09ac2..5a0ecaaee3b 100644 --- a/arch/m68knommu/defconfig +++ b/arch/m68knommu/defconfig @@ -1,41 +1,48 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.17 -# Tue Jun 27 12:57:06 2006 +# Linux kernel version: 2.6.23 +# Thu Oct 18 13:17:38 2007 # CONFIG_M68K=y # CONFIG_MMU is not set # CONFIG_FPU is not set +CONFIG_ZONE_DMA=y CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_RWSEM_XCHGADD_ALGORITHM is not set +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_FIND_NEXT_BIT=y CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_HARDIRQS=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_TIME_LOW_RES=y +CONFIG_NO_IOPORT=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" # -# Code maturity level options +# General setup # CONFIG_EXPERIMENTAL=y CONFIG_BROKEN_ON_SMP=y CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# CONFIG_LOCALVERSION="" CONFIG_LOCALVERSION_AUTO=y # CONFIG_SYSVIPC is not set # CONFIG_POSIX_MQUEUE is not set # CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_SYSCTL is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_SYSFS_DEPRECATED is not set # CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -CONFIG_UID16=y +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y CONFIG_EMBEDDED=y +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y # CONFIG_KALLSYMS is not set # CONFIG_HOTPLUG is not set CONFIG_PRINTK=y @@ -44,20 +51,25 @@ CONFIG_ELF_CORE=y CONFIG_BASE_FULL=y # CONFIG_FUTEX is not set # CONFIG_EPOLL is not set +# CONFIG_SIGNALFD is not set +# CONFIG_EVENTFD is not set +# CONFIG_VM_EVENT_COUNTERS is not set CONFIG_SLAB=y +# CONFIG_SLUB is not set +# CONFIG_SLOB is not set CONFIG_TINY_SHMEM=y CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -# CONFIG_MODULES is not set - -# -# Block layer -# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set +CONFIG_BLOCK=y +# CONFIG_LBD is not set # CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set # # IO Schedulers @@ -99,6 +111,7 @@ CONFIG_CLOCK_DIV=1 # # Platform # +# CONFIG_UC5272 is not set CONFIG_M5272C3=y # CONFIG_COBRA5272 is not set # CONFIG_CANCam is not set @@ -107,7 +120,6 @@ CONFIG_M5272C3=y # CONFIG_CPU16B is not set # CONFIG_MOD5272 is not set CONFIG_FREESCALE=y -# CONFIG_LARGE_ALLOCS is not set CONFIG_4KSTACKS=y # @@ -121,6 +133,11 @@ CONFIG_RAMAUTOBIT=y # CONFIG_RAM8BIT is not set # CONFIG_RAM16BIT is not set # CONFIG_RAM32BIT is not set + +# +# ROM configuration +# +# CONFIG_ROM is not set CONFIG_RAMKERNEL=y # CONFIG_ROMKERNEL is not set CONFIG_SELECT_MEMORY_MODEL=y @@ -131,20 +148,19 @@ CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y # CONFIG_SPARSEMEM_STATIC is not set CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_VIRT_TO_BUS=y # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # # CONFIG_PCI is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set # # PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# # # Executable file formats @@ -168,7 +184,6 @@ CONFIG_NET=y # # Networking options # -# CONFIG_NETDEBUG is not set CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y @@ -187,27 +202,21 @@ CONFIG_IP_FIB_HASH=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set # CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_BIC=y +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# # CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# # CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set @@ -218,7 +227,6 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_ATALK is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set -# CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set @@ -234,7 +242,17 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set # CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set # # Device Drivers @@ -245,16 +263,8 @@ CONFIG_TCP_CONG_BIC=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -# CONFIG_FW_LOADER is not set - -# -# Connector - unified userspace <-> kernelspace linker -# +# CONFIG_SYS_HYPERVISOR is not set # CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set @@ -266,11 +276,13 @@ CONFIG_MTD_PARTITIONS=y # User Modules And Translation Layers # CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=y CONFIG_MTD_BLOCK=y # CONFIG_FTL is not set # CONFIG_NFTL is not set # CONFIG_INFTL is not set # CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set # # RAM/ROM/Flash chip drivers @@ -290,7 +302,6 @@ CONFIG_MTD_CFI_I2=y CONFIG_MTD_RAM=y # CONFIG_MTD_ROM is not set # CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_OBSOLETE_CHIPS is not set # # Mapping drivers for chip access @@ -313,42 +324,25 @@ CONFIG_MTD_UCLINUX=y # CONFIG_MTD_DOC2000 is not set # CONFIG_MTD_DOC2001 is not set # CONFIG_MTD_DOC2001PLUS is not set - -# -# NAND Flash Device Drivers -# # CONFIG_MTD_NAND is not set - -# -# OneNAND Flash Device Drivers -# # CONFIG_MTD_ONENAND is not set # -# Parallel port support +# UBI - Unsorted block images # +# CONFIG_MTD_UBI is not set # CONFIG_PARPORT is not set - -# -# Plug and Play support -# - -# -# Block devices -# +CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=4096 -# CONFIG_BLK_DEV_INITRD is not set +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_CDROM_PKTCDVD is not set # CONFIG_ATA_OVER_ETH is not set - -# -# ATA/ATAPI/MFM/RLL support -# +# CONFIG_MISC_DEVICES is not set # CONFIG_IDE is not set # @@ -356,67 +350,29 @@ CONFIG_BLK_DEV_RAM_SIZE=4096 # # CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set - -# -# Multi-device support (RAID and LVM) -# +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set # CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set - -# -# IEEE 1394 (FireWire) support -# - -# -# I2O device support -# - -# -# Network device support -# CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set - -# -# PHY device support -# # CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# CONFIG_NET_ETHERNET=y # CONFIG_MII is not set CONFIG_FEC=y # CONFIG_FEC2 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set # -# Ethernet (1000 Mbit) -# - -# -# Ethernet (10000 Mbit) -# - -# -# Token Ring devices -# - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces +# Wireless LAN # +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set CONFIG_PPP=y # CONFIG_PPP_MULTILINK is not set @@ -427,20 +383,14 @@ CONFIG_PPP=y # CONFIG_PPP_BSDCOMP is not set # CONFIG_PPP_MPPE is not set # CONFIG_PPPOE is not set +# CONFIG_PPPOL2TP is not set # CONFIG_SLIP is not set +CONFIG_SLHC=y # CONFIG_SHAPER is not set # CONFIG_NETCONSOLE is not set # CONFIG_NETPOLL is not set # CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# # CONFIG_ISDN is not set - -# -# Telephony Support -# # CONFIG_PHONE is not set # @@ -472,34 +422,13 @@ CONFIG_SERIAL_COLDFIRE=y # CONFIG_UNIX98_PTYS is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# # CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# # CONFIG_WATCHDOG is not set +# CONFIG_HW_RANDOM is not set # CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set # CONFIG_R3964 is not set - -# -# Ftape, the floppy tape device driver -# # CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# # CONFIG_TCG_TPM is not set -# CONFIG_TELCLOCK is not set - -# -# I2C support -# # CONFIG_I2C is not set # @@ -507,101 +436,74 @@ CONFIG_LEGACY_PTY_COUNT=256 # # CONFIG_SPI is not set # CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# # CONFIG_W1 is not set - -# -# Hardware Monitoring support -# +# CONFIG_POWER_SUPPLY is not set # CONFIG_HWMON is not set -# CONFIG_HWMON_VID is not set # -# Misc devices +# Multifunction device drivers # +# CONFIG_MFD_SM501 is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set -CONFIG_VIDEO_V4L2=y +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y # -# Digital Video Broadcasting Devices +# Graphics support # -# CONFIG_DVB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set # -# Graphics support +# Display device support # +# CONFIG_DISPLAY_SUPPORT is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=y # CONFIG_FB is not set # # Sound # # CONFIG_SOUND is not set - -# -# USB support -# -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# +# CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set - -# -# LED devices -# # CONFIG_NEW_LEDS is not set +# CONFIG_RTC_CLASS is not set # -# LED drivers +# DMA Engine support # +# CONFIG_DMA_ENGINE is not set # -# LED Triggers +# DMA Clients # # -# InfiniBand support +# DMA Devices # # -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) +# Userspace I/O # - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set +# CONFIG_UIO is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set # CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set # CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set # CONFIG_OCFS2_FS is not set # CONFIG_MINIX_FS is not set CONFIG_ROMFS_FS=y @@ -629,6 +531,7 @@ CONFIG_ROMFS_FS=y # Pseudo filesystems # CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set @@ -645,7 +548,6 @@ CONFIG_RAMFS=y # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set -# CONFIG_JFFS_FS is not set # CONFIG_JFFS2_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set @@ -664,7 +566,6 @@ CONFIG_RAMFS=y # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set # # Partition Types @@ -678,15 +579,21 @@ CONFIG_MSDOS_PARTITION=y # CONFIG_NLS is not set # +# Distributed Lock Manager +# +# CONFIG_DLM is not set + +# # Kernel hacking # # CONFIG_PRINTK_TIME is not set +# CONFIG_ENABLE_MUST_CHECK is not set # CONFIG_MAGIC_SYSRQ is not set +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set # CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 # CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_UNWIND_INFO is not set # CONFIG_FULLDEBUG is not set # CONFIG_HIGHPROFILE is not set # CONFIG_BOOTPARAM is not set @@ -699,20 +606,16 @@ CONFIG_LOG_BUF_SHIFT=14 # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set - -# -# Cryptographic options -# # CONFIG_CRYPTO is not set # -# Hardware crypto devices -# - -# # Library routines # # CONFIG_CRC_CCITT is not set # CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set # CONFIG_CRC32 is not set +# CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/m68knommu/kernel/setup.c b/arch/m68knommu/kernel/setup.c index 3f86ade3a22..74bf94948ec 100644 --- a/arch/m68knommu/kernel/setup.c +++ b/arch/m68knommu/kernel/setup.c @@ -151,27 +151,15 @@ void setup_arch(char **cmdline_p) #ifdef CONFIG_ELITE printk(KERN_INFO "Modified for M5206eLITE by Rob Scott, rscott@mtrob.fdns.net\n"); #endif -#ifdef CONFIG_TELOS - printk(KERN_INFO "Modified for Omnia ToolVox by James D. Schettine, james@telos-systems.com\n"); -#endif #endif printk(KERN_INFO "Flat model support (C) 1998,1999 Kenneth Albanowski, D. Jeff Dionne\n"); #if defined( CONFIG_PILOT ) && defined( CONFIG_M68328 ) printk(KERN_INFO "TRG SuperPilot FLASH card support <info@trgnet.com>\n"); #endif - #if defined( CONFIG_PILOT ) && defined( CONFIG_M68EZ328 ) printk(KERN_INFO "PalmV support by Lineo Inc. <jeff@uclinux.com>\n"); #endif - -#ifdef CONFIG_M68EZ328ADS - printk(KERN_INFO "M68EZ328ADS board support (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>\n"); -#endif - -#ifdef CONFIG_ALMA_ANS - printk(KERN_INFO "Alma Electronics board support (C) 1999 Vladimir Gurevich <vgurevic@cisco.com>\n"); -#endif #if defined (CONFIG_M68360) printk(KERN_INFO "QUICC port done by SED Systems <hamilton@sedsystems.ca>,\n"); printk(KERN_INFO "based on 2.0.38 port by Lineo Inc. <mleslie@lineo.com>.\n"); @@ -188,11 +176,9 @@ void setup_arch(char **cmdline_p) "BSS=0x%06x-0x%06x\n", (int) &_stext, (int) &_etext, (int) &_sdata, (int) &_edata, (int) &_sbss, (int) &_ebss); - printk(KERN_DEBUG "KERNEL -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x " - "STACK=0x%06x-0x%06x\n", + printk(KERN_DEBUG "MEMORY -> ROMFS=0x%06x-0x%06x MEM=0x%06x-0x%06x\n ", (int) &_ebss, (int) memory_start, - (int) memory_start, (int) memory_end, - (int) memory_end, (int) _ramend); + (int) memory_start, (int) memory_end); #endif /* Keep a copy of command line */ @@ -287,12 +273,3 @@ struct seq_operations cpuinfo_op = { .show = show_cpuinfo, }; -void arch_gettod(int *year, int *mon, int *day, int *hour, - int *min, int *sec) -{ - if (mach_gettod) - mach_gettod(year, mon, day, hour, min, sec); - else - *year = *mon = *day = *hour = *min = *sec = 0; -} - diff --git a/arch/m68knommu/kernel/signal.c b/arch/m68knommu/kernel/signal.c index 437f8c6c14a..70371378db8 100644 --- a/arch/m68knommu/kernel/signal.c +++ b/arch/m68knommu/kernel/signal.c @@ -781,15 +781,7 @@ asmlinkage int do_signal(sigset_t *oldset, struct pt_regs *regs) /* Did we come from a system call? */ if (regs->orig_d0 >= 0) { /* Restart the system call - no handlers present */ - if (regs->d0 == -ERESTARTNOHAND - || regs->d0 == -ERESTARTSYS - || regs->d0 == -ERESTARTNOINTR) { - regs->d0 = regs->orig_d0; - regs->pc -= 2; - } else if (regs->d0 == -ERESTART_RESTARTBLOCK) { - regs->d0 = __NR_restart_syscall; - regs->pc -= 2; - } + handle_restart(regs, NULL, 0); } return 0; } diff --git a/arch/m68knommu/kernel/time.c b/arch/m68knommu/kernel/time.c index 467053da2d0..77e5375a2dd 100644 --- a/arch/m68knommu/kernel/time.c +++ b/arch/m68knommu/kernel/time.c @@ -27,7 +27,6 @@ #define TICK_SIZE (tick_nsec / 1000) - static inline int set_rtc_mmss(unsigned long nowtime) { if (mach_set_clock_mmss) @@ -39,15 +38,11 @@ static inline int set_rtc_mmss(unsigned long nowtime) * timer_interrupt() needs to keep up the real-time clock, * as well as call the "do_timer()" routine every clocktick */ -static irqreturn_t timer_interrupt(int irq, void *dummy) +irqreturn_t arch_timer_interrupt(int irq, void *dummy) { /* last time the cmos clock got updated */ static long last_rtc_update=0; - /* may need to kick the hardware timer */ - if (mach_tick) - mach_tick(); - write_seqlock(&xtime_lock); do_timer(1); @@ -103,10 +98,10 @@ void time_init(void) { unsigned int year, mon, day, hour, min, sec; - extern void arch_gettod(int *year, int *mon, int *day, int *hour, - int *min, int *sec); - - arch_gettod(&year, &mon, &day, &hour, &min, &sec); + if (mach_gettod) + mach_gettod(&year, &mon, &day, &hour, &min, &sec); + else + year = mon = day = hour = min = sec = 0; if ((year += 1900) < 1970) year += 100; @@ -114,7 +109,7 @@ void time_init(void) xtime.tv_nsec = 0; wall_to_monotonic.tv_sec = -xtime.tv_sec; - mach_sched_init(timer_interrupt); + hw_timer_init(); } /* @@ -128,7 +123,7 @@ void do_gettimeofday(struct timeval *tv) do { seq = read_seqbegin_irqsave(&xtime_lock, flags); - usec = mach_gettimeoffset ? mach_gettimeoffset() : 0; + usec = hw_timer_offset(); sec = xtime.tv_sec; usec += (xtime.tv_nsec / 1000); } while (read_seqretry_irqrestore(&xtime_lock, seq, flags)); @@ -160,8 +155,7 @@ int do_settimeofday(struct timespec *tv) * Discover what correction gettimeofday * would have done, and then undo it! */ - if (mach_gettimeoffset) - nsec -= (mach_gettimeoffset() * 1000); + nsec -= (hw_timer_offset() * 1000); wtm_sec = wall_to_monotonic.tv_sec + (xtime.tv_sec - sec); wtm_nsec = wall_to_monotonic.tv_nsec + (xtime.tv_nsec - nsec); diff --git a/arch/m68knommu/platform/5206/config.c b/arch/m68knommu/platform/5206/config.c index d0f2dc5cb5a..b3c4dd4cc13 100644 --- a/arch/m68knommu/platform/5206/config.c +++ b/arch/m68knommu/platform/5206/config.c @@ -10,13 +10,10 @@ /***************************************************************************/ #include <linux/kernel.h> -#include <linux/sched.h> #include <linux/param.h> #include <linux/init.h> #include <linux/interrupt.h> -#include <asm/irq.h> #include <asm/dma.h> -#include <asm/traps.h> #include <asm/machdep.h> #include <asm/coldfire.h> #include <asm/mcftimer.h> @@ -25,9 +22,6 @@ /***************************************************************************/ -void coldfire_tick(void); -void coldfire_timer_init(irq_handler_t handler); -unsigned long coldfire_timer_offset(void); void coldfire_reset(void); /***************************************************************************/ @@ -97,9 +91,6 @@ int mcf_timerirqpending(int timer) void config_BSP(char *commandp, int size) { mcf_setimr(MCFSIM_IMR_MASKALL); - mach_sched_init = coldfire_timer_init; - mach_tick = coldfire_tick; - mach_gettimeoffset = coldfire_timer_offset; mach_reset = coldfire_reset; } diff --git a/arch/m68knommu/platform/5206e/config.c b/arch/m68knommu/platform/5206e/config.c index 425703fb6ce..f84a4aea8cb 100644 --- a/arch/m68knommu/platform/5206e/config.c +++ b/arch/m68knommu/platform/5206e/config.c @@ -9,23 +9,16 @@ /***************************************************************************/ #include <linux/kernel.h> -#include <linux/sched.h> #include <linux/param.h> #include <linux/interrupt.h> -#include <asm/irq.h> #include <asm/dma.h> -#include <asm/traps.h> #include <asm/machdep.h> #include <asm/coldfire.h> -#include <asm/mcftimer.h> #include <asm/mcfsim.h> #include <asm/mcfdma.h> /***************************************************************************/ -void coldfire_tick(void); -void coldfire_timer_init(irq_handler_t handler); -unsigned long coldfire_timer_offset(void); void coldfire_reset(void); /***************************************************************************/ @@ -102,9 +95,6 @@ void config_BSP(char *commandp, int size) commandp[size-1] = 0; #endif /* CONFIG_NETtel */ - mach_sched_init = coldfire_timer_init; - mach_tick = coldfire_tick; - mach_gettimeoffset = coldfire_timer_offset; mach_reset = coldfire_reset; } diff --git a/arch/m68knommu/platform/520x/config.c b/arch/m68knommu/platform/520x/config.c index a2c95bebd00..6edbd41261c 100644 --- a/arch/m68knommu/platform/520x/config.c +++ b/arch/m68knommu/platform/520x/config.c @@ -27,9 +27,6 @@ unsigned int dma_device_address[MAX_M68K_DMA_CHANNELS]; /***************************************************************************/ -void coldfire_pit_tick(void); -void coldfire_pit_init(irq_handler_t handler); -unsigned long coldfire_pit_offset(void); void coldfire_reset(void); /***************************************************************************/ @@ -47,10 +44,7 @@ void mcf_autovector(unsigned int vec) void config_BSP(char *commandp, int size) { - mach_sched_init = coldfire_pit_init; - mach_tick = coldfire_pit_tick; - mach_gettimeoffset = coldfire_pit_offset; - mach_reset = coldfire_reset; + mach_reset = coldfire_reset; } /***************************************************************************/ diff --git a/arch/m68knommu/platform/523x/config.c b/arch/m68knommu/platform/523x/config.c index 0a3af05a434..e7f80c8e863 100644 --- a/arch/m68knommu/platform/523x/config.c +++ b/arch/m68knommu/platform/523x/config.c @@ -13,12 +13,10 @@ /***************************************************************************/ #include <linux/kernel.h> -#include <linux/sched.h> #include <linux/param.h> #include <linux/init.h> #include <linux/interrupt.h> #include <asm/dma.h> -#include <asm/traps.h> #include <asm/machdep.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> @@ -26,9 +24,6 @@ /***************************************************************************/ -void coldfire_pit_tick(void); -void coldfire_pit_init(irq_handler_t handler); -unsigned long coldfire_pit_offset(void); void coldfire_reset(void); /***************************************************************************/ @@ -62,9 +57,6 @@ void mcf_autovector(unsigned int vec) void config_BSP(char *commandp, int size) { mcf_disableall(); - mach_sched_init = coldfire_pit_init; - mach_tick = coldfire_pit_tick; - mach_gettimeoffset = coldfire_pit_offset; mach_reset = coldfire_reset; } diff --git a/arch/m68knommu/platform/5249/config.c b/arch/m68knommu/platform/5249/config.c index dc2c362590c..d4d39435cb1 100644 --- a/arch/m68knommu/platform/5249/config.c +++ b/arch/m68knommu/platform/5249/config.c @@ -9,24 +9,17 @@ /***************************************************************************/ #include <linux/kernel.h> -#include <linux/sched.h> #include <linux/param.h> #include <linux/init.h> #include <linux/interrupt.h> -#include <asm/irq.h> #include <asm/dma.h> -#include <asm/traps.h> #include <asm/machdep.h> #include <asm/coldfire.h> -#include <asm/mcftimer.h> #include <asm/mcfsim.h> #include <asm/mcfdma.h> /***************************************************************************/ -void coldfire_tick(void); -void coldfire_timer_init(irq_handler_t handler); -unsigned long coldfire_timer_offset(void); void coldfire_reset(void); /***************************************************************************/ @@ -95,9 +88,6 @@ int mcf_timerirqpending(int timer) void config_BSP(char *commandp, int size) { mcf_setimr(MCFSIM_IMR_MASKALL); - mach_sched_init = coldfire_timer_init; - mach_tick = coldfire_tick; - mach_gettimeoffset = coldfire_timer_offset; mach_reset = coldfire_reset; } diff --git a/arch/m68knommu/platform/5272/config.c b/arch/m68knommu/platform/5272/config.c index 1365a8300d5..634a6375e4a 100644 --- a/arch/m68knommu/platform/5272/config.c +++ b/arch/m68knommu/platform/5272/config.c @@ -10,24 +10,17 @@ /***************************************************************************/ #include <linux/kernel.h> -#include <linux/sched.h> #include <linux/param.h> #include <linux/init.h> #include <linux/interrupt.h> -#include <asm/irq.h> #include <asm/dma.h> -#include <asm/traps.h> #include <asm/machdep.h> #include <asm/coldfire.h> -#include <asm/mcftimer.h> #include <asm/mcfsim.h> #include <asm/mcfdma.h> /***************************************************************************/ -void coldfire_tick(void); -void coldfire_timer_init(irq_handler_t handler); -unsigned long coldfire_timer_offset(void); void coldfire_reset(void); extern unsigned int mcf_timervector; @@ -128,9 +121,6 @@ void config_BSP(char *commandp, int size) mcf_timervector = 69; mcf_profilevector = 70; - mach_sched_init = coldfire_timer_init; - mach_tick = coldfire_tick; - mach_gettimeoffset = coldfire_timer_offset; mach_reset = coldfire_reset; } diff --git a/arch/m68knommu/platform/527x/config.c b/arch/m68knommu/platform/527x/config.c index 1b820441419..9cbfbc68ae4 100644 --- a/arch/m68knommu/platform/527x/config.c +++ b/arch/m68knommu/platform/527x/config.c @@ -13,12 +13,10 @@ /***************************************************************************/ #include <linux/kernel.h> -#include <linux/sched.h> #include <linux/param.h> #include <linux/init.h> #include <linux/interrupt.h> #include <asm/dma.h> -#include <asm/traps.h> #include <asm/machdep.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> @@ -26,9 +24,6 @@ /***************************************************************************/ -void coldfire_pit_tick(void); -void coldfire_pit_init(irq_handler_t handler); -unsigned long coldfire_pit_offset(void); void coldfire_reset(void); /***************************************************************************/ @@ -62,9 +57,6 @@ void mcf_autovector(unsigned int vec) void config_BSP(char *commandp, int size) { mcf_disableall(); - mach_sched_init = coldfire_pit_init; - mach_tick = coldfire_pit_tick; - mach_gettimeoffset = coldfire_pit_offset; mach_reset = coldfire_reset; } diff --git a/arch/m68knommu/platform/528x/config.c b/arch/m68knommu/platform/528x/config.c index a089e951369..acbd43486d9 100644 --- a/arch/m68knommu/platform/528x/config.c +++ b/arch/m68knommu/platform/528x/config.c @@ -13,12 +13,10 @@ /***************************************************************************/ #include <linux/kernel.h> -#include <linux/sched.h> #include <linux/param.h> #include <linux/init.h> #include <linux/interrupt.h> #include <asm/dma.h> -#include <asm/traps.h> #include <asm/machdep.h> #include <asm/coldfire.h> #include <asm/mcfsim.h> @@ -26,9 +24,6 @@ /***************************************************************************/ -void coldfire_pit_tick(void); -void coldfire_pit_init(irq_handler_t handler); -unsigned long coldfire_pit_offset(void); void coldfire_reset(void); /***************************************************************************/ @@ -62,9 +57,6 @@ void mcf_autovector(unsigned int vec) void config_BSP(char *commandp, int size) { mcf_disableall(); - mach_sched_init = coldfire_pit_init; - mach_tick = coldfire_pit_tick; - mach_gettimeoffset = coldfire_pit_offset; mach_reset = coldfire_reset; } diff --git a/arch/m68knommu/platform/5307/config.c b/arch/m68knommu/platform/5307/config.c index e3461619fd6..6040821e637 100644 --- a/arch/m68knommu/platform/5307/config.c +++ b/arch/m68knommu/platform/5307/config.c @@ -10,25 +10,18 @@ /***************************************************************************/ #include <linux/kernel.h> -#include <linux/sched.h> #include <linux/param.h> #include <linux/init.h> #include <linux/interrupt.h> -#include <asm/irq.h> #include <asm/dma.h> -#include <asm/traps.h> #include <asm/machdep.h> #include <asm/coldfire.h> -#include <asm/mcftimer.h> #include <asm/mcfsim.h> #include <asm/mcfdma.h> #include <asm/mcfwdebug.h> /***************************************************************************/ -void coldfire_tick(void); -void coldfire_timer_init(irq_handler_t handler); -unsigned long coldfire_timer_offset(void); void coldfire_reset(void); extern unsigned int mcf_timervector; @@ -122,9 +115,6 @@ void config_BSP(char *commandp, int size) mcf_timerlevel = 6; #endif - mach_sched_init = coldfire_timer_init; - mach_tick = coldfire_tick; - mach_gettimeoffset = coldfire_timer_offset; mach_reset = coldfire_reset; #ifdef MCF_BDM_DISABLE diff --git a/arch/m68knommu/platform/5307/entry.S b/arch/m68knommu/platform/5307/entry.S index a8cd867805c..b333731b875 100644 --- a/arch/m68knommu/platform/5307/entry.S +++ b/arch/m68knommu/platform/5307/entry.S @@ -74,7 +74,8 @@ ENTRY(system_call) movel %sp,%d2 /* get thread_info pointer */ andl #-THREAD_SIZE,%d2 /* at start of kernel stack */ movel %d2,%a0 - movel %sp,%a0@(THREAD_ESP0) /* save top of frame */ + movel %a0@,%a1 /* save top of frame */ + movel %sp,%a1@(TASK_THREAD+THREAD_ESP0) btst #(TIF_SYSCALL_TRACE%8),%a0@(TI_FLAGS+(31-TIF_SYSCALL_TRACE)/8) bnes 1f @@ -83,6 +84,8 @@ ENTRY(system_call) movel %d0,%sp@(PT_D0) /* save the return value */ jra ret_from_exception 1: + movel #-ENOSYS,%d2 /* strace needs -ENOSYS in PT_D0 */ + movel %d2,PT_D0(%sp) /* on syscall entry */ subql #4,%sp SAVE_SWITCH_STACK jbsr syscall_trace diff --git a/arch/m68knommu/platform/5307/pit.c b/arch/m68knommu/platform/5307/pit.c index f18352fa35a..173b754d1cd 100644 --- a/arch/m68knommu/platform/5307/pit.c +++ b/arch/m68knommu/platform/5307/pit.c @@ -17,6 +17,7 @@ #include <linux/init.h> #include <linux/interrupt.h> #include <linux/irq.h> +#include <asm/machdep.h> #include <asm/io.h> #include <asm/coldfire.h> #include <asm/mcfpit.h> @@ -31,28 +32,30 @@ /***************************************************************************/ -void coldfire_pit_tick(void) +static irqreturn_t hw_tick(int irq, void *dummy) { unsigned short pcsr; /* Reset the ColdFire timer */ pcsr = __raw_readw(TA(MCFPIT_PCSR)); __raw_writew(pcsr | MCFPIT_PCSR_PIF, TA(MCFPIT_PCSR)); + + return arch_timer_interrupt(irq, dummy); } /***************************************************************************/ static struct irqaction coldfire_pit_irq = { - .name = "timer", - .flags = IRQF_DISABLED | IRQF_TIMER, + .name = "timer", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = hw_tick, }; -void coldfire_pit_init(irq_handler_t handler) +void hw_timer_init(void) { volatile unsigned char *icrp; volatile unsigned long *imrp; - coldfire_pit_irq.handler = handler; setup_irq(MCFINT_VECBASE + MCFINT_PIT1, &coldfire_pit_irq); icrp = (volatile unsigned char *) (MCF_IPSBAR + MCFICM_INTC0 + @@ -71,7 +74,7 @@ void coldfire_pit_init(irq_handler_t handler) /***************************************************************************/ -unsigned long coldfire_pit_offset(void) +unsigned long hw_timer_offset(void) { volatile unsigned long *ipr; unsigned long pmr, pcntr, offset; diff --git a/arch/m68knommu/platform/5307/timers.c b/arch/m68knommu/platform/5307/timers.c index 64bd0ff9029..489dec85c85 100644 --- a/arch/m68knommu/platform/5307/timers.c +++ b/arch/m68knommu/platform/5307/timers.c @@ -9,10 +9,9 @@ /***************************************************************************/ #include <linux/kernel.h> +#include <linux/init.h> #include <linux/sched.h> -#include <linux/param.h> #include <linux/interrupt.h> -#include <linux/init.h> #include <linux/irq.h> #include <asm/io.h> #include <asm/traps.h> @@ -54,24 +53,28 @@ extern int mcf_timerirqpending(int timer); /***************************************************************************/ -void coldfire_tick(void) +static irqreturn_t hw_tick(int irq, void *dummy) { /* Reset the ColdFire timer */ __raw_writeb(MCFTIMER_TER_CAP | MCFTIMER_TER_REF, TA(MCFTIMER_TER)); + + return arch_timer_interrupt(irq, dummy); } /***************************************************************************/ static struct irqaction coldfire_timer_irq = { - .name = "timer", - .flags = IRQF_DISABLED | IRQF_TIMER, + .name = "timer", + .flags = IRQF_DISABLED | IRQF_TIMER, + .handler = hw_tick, }; +/***************************************************************************/ + static int ticks_per_intr; -void coldfire_timer_init(irq_handler_t handler) +void hw_timer_init(void) { - coldfire_timer_irq.handler = handler; setup_irq(mcf_timervector, &coldfire_timer_irq); __raw_writew(MCFTIMER_TMR_DISABLE, TA(MCFTIMER_TMR)); @@ -89,7 +92,7 @@ void coldfire_timer_init(irq_handler_t handler) /***************************************************************************/ -unsigned long coldfire_timer_offset(void) +unsigned long hw_timer_offset(void) { unsigned long tcn, offset; diff --git a/arch/m68knommu/platform/532x/config.c b/arch/m68knommu/platform/532x/config.c index b32c6425f82..f77328b7b6d 100644 --- a/arch/m68knommu/platform/532x/config.c +++ b/arch/m68knommu/platform/532x/config.c @@ -18,25 +18,18 @@ /***************************************************************************/ #include <linux/kernel.h> -#include <linux/sched.h> #include <linux/param.h> #include <linux/init.h> #include <linux/interrupt.h> -#include <asm/irq.h> #include <asm/dma.h> -#include <asm/traps.h> #include <asm/machdep.h> #include <asm/coldfire.h> -#include <asm/mcftimer.h> #include <asm/mcfsim.h> #include <asm/mcfdma.h> #include <asm/mcfwdebug.h> /***************************************************************************/ -void coldfire_tick(void); -void coldfire_timer_init(irq_handler_t handler); -unsigned long coldfire_timer_offset(void); void coldfire_reset(void); extern unsigned int mcf_timervector; @@ -104,9 +97,6 @@ void config_BSP(char *commandp, int size) mcf_timervector = 64+32; mcf_profilevector = 64+33; - mach_sched_init = coldfire_timer_init; - mach_tick = coldfire_tick; - mach_gettimeoffset = coldfire_timer_offset; mach_reset = coldfire_reset; #ifdef MCF_BDM_DISABLE diff --git a/arch/m68knommu/platform/5407/config.c b/arch/m68knommu/platform/5407/config.c index e692536817d..2d3b62eba7c 100644 --- a/arch/m68knommu/platform/5407/config.c +++ b/arch/m68knommu/platform/5407/config.c @@ -10,24 +10,17 @@ /***************************************************************************/ #include <linux/kernel.h> -#include <linux/sched.h> #include <linux/param.h> #include <linux/init.h> #include <linux/interrupt.h> -#include <asm/irq.h> #include <asm/dma.h> -#include <asm/traps.h> #include <asm/machdep.h> #include <asm/coldfire.h> -#include <asm/mcftimer.h> #include <asm/mcfsim.h> #include <asm/mcfdma.h> /***************************************************************************/ -void coldfire_tick(void); -void coldfire_timer_init(irq_handler_t handler); -unsigned long coldfire_timer_offset(void); void coldfire_reset(void); extern unsigned int mcf_timervector; @@ -108,9 +101,6 @@ void config_BSP(char *commandp, int size) mcf_timerlevel = 6; #endif - mach_sched_init = coldfire_timer_init; - mach_tick = coldfire_tick; - mach_gettimeoffset = coldfire_timer_offset; mach_reset = coldfire_reset; } diff --git a/drivers/char/cyclades.c b/drivers/char/cyclades.c index d1bd0f08a33..e4f579c3e24 100644 --- a/drivers/char/cyclades.c +++ b/drivers/char/cyclades.c @@ -1602,8 +1602,8 @@ static void cyz_handle_tx(struct cyclades_port *info, info->icount.tx++; } #endif -ztxdone: tty_wakeup(tty); +ztxdone: /* Update tx_put */ cy_writel(&buf_ctrl->tx_put, tx_put); } diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c index 927cb34c480..7c426d07a55 100644 --- a/drivers/md/bitmap.c +++ b/drivers/md/bitmap.c @@ -274,7 +274,7 @@ static int write_sb_page(struct bitmap *bitmap, struct page *page, int wait) if (bitmap->offset < 0) { /* DATA BITMAP METADATA */ if (bitmap->offset - + page->index * (PAGE_SIZE/512) + + (long)(page->index * (PAGE_SIZE/512)) + size/512 > 0) /* bitmap runs in to metadata */ return -EINVAL; diff --git a/drivers/md/raid5.c b/drivers/md/raid5.c index 8ee181a01f5..80a67d789b7 100644 --- a/drivers/md/raid5.c +++ b/drivers/md/raid5.c @@ -376,7 +376,12 @@ static unsigned long get_stripe_work(struct stripe_head *sh) ack++; sh->ops.count -= ack; - BUG_ON(sh->ops.count < 0); + if (unlikely(sh->ops.count < 0)) { + printk(KERN_ERR "pending: %#lx ops.pending: %#lx ops.ack: %#lx " + "ops.complete: %#lx\n", pending, sh->ops.pending, + sh->ops.ack, sh->ops.complete); + BUG(); + } return pending; } @@ -550,8 +555,7 @@ static void ops_complete_biofill(void *stripe_head_ref) } } } - clear_bit(STRIPE_OP_BIOFILL, &sh->ops.ack); - clear_bit(STRIPE_OP_BIOFILL, &sh->ops.pending); + set_bit(STRIPE_OP_BIOFILL, &sh->ops.complete); return_io(return_bi); @@ -2893,6 +2897,13 @@ static void handle_stripe6(struct stripe_head *sh, struct page *tmp_page) s.expanded = test_bit(STRIPE_EXPAND_READY, &sh->state); /* Now to look around and see what can be done */ + /* clean-up completed biofill operations */ + if (test_bit(STRIPE_OP_BIOFILL, &sh->ops.complete)) { + clear_bit(STRIPE_OP_BIOFILL, &sh->ops.pending); + clear_bit(STRIPE_OP_BIOFILL, &sh->ops.ack); + clear_bit(STRIPE_OP_BIOFILL, &sh->ops.complete); + } + rcu_read_lock(); for (i=disks; i--; ) { mdk_rdev_t *rdev; diff --git a/drivers/net/fec.c b/drivers/net/fec.c index 2b5782056dd..0fbf1bbbaee 100644 --- a/drivers/net/fec.c +++ b/drivers/net/fec.c @@ -751,13 +751,11 @@ mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_devi if (mii_head) { mii_tail->mii_next = mip; mii_tail = mip; - } - else { + } else { mii_head = mii_tail = mip; fep->hwp->fec_mii_data = regval; } - } - else { + } else { retval = 1; } @@ -768,14 +766,11 @@ mii_queue(struct net_device *dev, int regval, void (*func)(uint, struct net_devi static void mii_do_cmd(struct net_device *dev, const phy_cmd_t *c) { - int k; - if(!c) return; - for(k = 0; (c+k)->mii_data != mk_mii_end; k++) { - mii_queue(dev, (c+k)->mii_data, (c+k)->funct); - } + for (; c->mii_data != mk_mii_end; c++) + mii_queue(dev, c->mii_data, c->funct); } static void mii_parse_sr(uint mii_reg, struct net_device *dev) @@ -792,7 +787,6 @@ static void mii_parse_sr(uint mii_reg, struct net_device *dev) status |= PHY_STAT_FAULT; if (mii_reg & 0x0020) status |= PHY_STAT_ANC; - *s = status; } @@ -1239,7 +1233,6 @@ mii_link_interrupt(int irq, void * dev_id); #endif #if defined(CONFIG_M5272) - /* * Code specific to Coldfire 5272 setup. */ @@ -2020,8 +2013,7 @@ static void mii_relink(struct work_struct *work) & (PHY_STAT_100FDX | PHY_STAT_10FDX)) duplex = 1; fec_restart(dev, duplex); - } - else + } else fec_stop(dev); #if 0 @@ -2119,8 +2111,7 @@ mii_discover_phy(uint mii_reg, struct net_device *dev) fep->phy_id = phytype << 16; mii_queue(dev, mk_mii_read(MII_REG_PHYIR2), mii_discover_phy3); - } - else { + } else { fep->phy_addr++; mii_queue(dev, mk_mii_read(MII_REG_PHYIR1), mii_discover_phy); @@ -2574,8 +2565,7 @@ fec_restart(struct net_device *dev, int duplex) if (duplex) { fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x04;/* MII enable */ fecp->fec_x_cntrl = 0x04; /* FD enable */ - } - else { + } else { /* MII enable|No Rcv on Xmit */ fecp->fec_r_cntrl = OPT_FRAME_SIZE | 0x06; fecp->fec_x_cntrl = 0x00; diff --git a/drivers/serial/mcf.c b/drivers/serial/mcf.c new file mode 100644 index 00000000000..a7d4360ea7d --- /dev/null +++ b/drivers/serial/mcf.c @@ -0,0 +1,653 @@ +/****************************************************************************/ + +/* + * mcf.c -- Freescale ColdFire UART driver + * + * (C) Copyright 2003-2007, Greg Ungerer <gerg@snapgear.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + +/****************************************************************************/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/interrupt.h> +#include <linux/module.h> +#include <linux/console.h> +#include <linux/tty.h> +#include <linux/tty_flip.h> +#include <linux/serial.h> +#include <linux/serial_core.h> +#include <linux/io.h> +#include <asm/coldfire.h> +#include <asm/mcfsim.h> +#include <asm/mcfuart.h> +#include <asm/nettel.h> + +/****************************************************************************/ + +/* + * Some boards implement the DTR/DCD lines using GPIO lines, most + * don't. Dummy out the access macros for those that don't. Those + * that do should define these macros somewhere in there board + * specific inlude files. + */ +#if !defined(mcf_getppdcd) +#define mcf_getppdcd(p) (1) +#endif +#if !defined(mcf_getppdtr) +#define mcf_getppdtr(p) (1) +#endif +#if !defined(mcf_setppdtr) +#define mcf_setppdtr(p, v) do { } while (0) +#endif + +/****************************************************************************/ + +/* + * Local per-uart structure. + */ +struct mcf_uart { + struct uart_port port; + unsigned int sigs; /* Local copy of line sigs */ + unsigned char imr; /* Local IMR mirror */ +}; + +/****************************************************************************/ + +static unsigned int mcf_tx_empty(struct uart_port *port) +{ + return (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXEMPTY) ? + TIOCSER_TEMT : 0; +} + +/****************************************************************************/ + +static unsigned int mcf_get_mctrl(struct uart_port *port) +{ + struct mcf_uart *pp = (struct mcf_uart *) port; + unsigned long flags; + unsigned int sigs; + + spin_lock_irqsave(&port->lock, flags); + sigs = (readb(port->membase + MCFUART_UIPR) & MCFUART_UIPR_CTS) ? + 0 : TIOCM_CTS; + sigs |= (pp->sigs & TIOCM_RTS); + sigs |= (mcf_getppdcd(port->line) ? TIOCM_CD : 0); + sigs |= (mcf_getppdtr(port->line) ? TIOCM_DTR : 0); + spin_unlock_irqrestore(&port->lock, flags); + return sigs; +} + +/****************************************************************************/ + +static void mcf_set_mctrl(struct uart_port *port, unsigned int sigs) +{ + struct mcf_uart *pp = (struct mcf_uart *) port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + pp->sigs = sigs; + mcf_setppdtr(port->line, (sigs & TIOCM_DTR)); + if (sigs & TIOCM_RTS) + writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP1); + else + writeb(MCFUART_UOP_RTS, port->membase + MCFUART_UOP0); + spin_unlock_irqrestore(&port->lock, flags); +} + +/****************************************************************************/ + +static void mcf_start_tx(struct uart_port *port) +{ + struct mcf_uart *pp = (struct mcf_uart *) port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + pp->imr |= MCFUART_UIR_TXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); + spin_unlock_irqrestore(&port->lock, flags); +} + +/****************************************************************************/ + +static void mcf_stop_tx(struct uart_port *port) +{ + struct mcf_uart *pp = (struct mcf_uart *) port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + pp->imr &= ~MCFUART_UIR_TXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); + spin_unlock_irqrestore(&port->lock, flags); +} + +/****************************************************************************/ + +static void mcf_stop_rx(struct uart_port *port) +{ + struct mcf_uart *pp = (struct mcf_uart *) port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + pp->imr &= ~MCFUART_UIR_RXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); + spin_unlock_irqrestore(&port->lock, flags); +} + +/****************************************************************************/ + +static void mcf_break_ctl(struct uart_port *port, int break_state) +{ + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + if (break_state == -1) + writeb(MCFUART_UCR_CMDBREAKSTART, port->membase + MCFUART_UCR); + else + writeb(MCFUART_UCR_CMDBREAKSTOP, port->membase + MCFUART_UCR); + spin_unlock_irqrestore(&port->lock, flags); +} + +/****************************************************************************/ + +static void mcf_enable_ms(struct uart_port *port) +{ +} + +/****************************************************************************/ + +static int mcf_startup(struct uart_port *port) +{ + struct mcf_uart *pp = (struct mcf_uart *) port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Reset UART, get it into known state... */ + writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); + writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); + + /* Enable the UART transmitter and receiver */ + writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, + port->membase + MCFUART_UCR); + + /* Enable RX interrupts now */ + pp->imr = MCFUART_UIR_RXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); + + spin_unlock_irqrestore(&port->lock, flags); + + return 0; +} + +/****************************************************************************/ + +static void mcf_shutdown(struct uart_port *port) +{ + struct mcf_uart *pp = (struct mcf_uart *) port; + unsigned long flags; + + spin_lock_irqsave(&port->lock, flags); + + /* Disable all interrupts now */ + pp->imr = 0; + writeb(pp->imr, port->membase + MCFUART_UIMR); + + /* Disable UART transmitter and receiver */ + writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); + writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); + + spin_unlock_irqrestore(&port->lock, flags); +} + +/****************************************************************************/ + +static void mcf_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + unsigned long flags; + unsigned int baud, baudclk; + unsigned char mr1, mr2; + + baud = uart_get_baud_rate(port, termios, old, 0, 230400); + baudclk = ((MCF_BUSCLK / baud) + 16) / 32; + + mr1 = MCFUART_MR1_RXIRQRDY | MCFUART_MR1_RXERRCHAR; + mr2 = 0; + + switch (termios->c_cflag & CSIZE) { + case CS5: mr1 |= MCFUART_MR1_CS5; break; + case CS6: mr1 |= MCFUART_MR1_CS6; break; + case CS7: mr1 |= MCFUART_MR1_CS7; break; + case CS8: + default: mr1 |= MCFUART_MR1_CS8; break; + } + + if (termios->c_cflag & PARENB) { + if (termios->c_cflag & CMSPAR) { + if (termios->c_cflag & PARODD) + mr1 |= MCFUART_MR1_PARITYMARK; + else + mr1 |= MCFUART_MR1_PARITYSPACE; + } else { + if (termios->c_cflag & PARODD) + mr1 |= MCFUART_MR1_PARITYODD; + else + mr1 |= MCFUART_MR1_PARITYEVEN; + } + } else { + mr1 |= MCFUART_MR1_PARITYNONE; + } + + if (termios->c_cflag & CSTOPB) + mr2 |= MCFUART_MR2_STOP2; + else + mr2 |= MCFUART_MR2_STOP1; + + if (termios->c_cflag & CRTSCTS) { + mr1 |= MCFUART_MR1_RXRTS; + mr2 |= MCFUART_MR2_TXCTS; + } + + spin_lock_irqsave(&port->lock, flags); + writeb(MCFUART_UCR_CMDRESETRX, port->membase + MCFUART_UCR); + writeb(MCFUART_UCR_CMDRESETTX, port->membase + MCFUART_UCR); + writeb(MCFUART_UCR_CMDRESETMRPTR, port->membase + MCFUART_UCR); + writeb(mr1, port->membase + MCFUART_UMR); + writeb(mr2, port->membase + MCFUART_UMR); + writeb((baudclk & 0xff00) >> 8, port->membase + MCFUART_UBG1); + writeb((baudclk & 0xff), port->membase + MCFUART_UBG2); + writeb(MCFUART_UCSR_RXCLKTIMER | MCFUART_UCSR_TXCLKTIMER, + port->membase + MCFUART_UCSR); + writeb(MCFUART_UCR_RXENABLE | MCFUART_UCR_TXENABLE, + port->membase + MCFUART_UCR); + spin_unlock_irqrestore(&port->lock, flags); +} + +/****************************************************************************/ + +static void mcf_rx_chars(struct mcf_uart *pp) +{ + struct uart_port *port = (struct uart_port *) pp; + unsigned char status, ch, flag; + + while ((status = readb(port->membase + MCFUART_USR)) & MCFUART_USR_RXREADY) { + ch = readb(port->membase + MCFUART_URB); + flag = TTY_NORMAL; + port->icount.rx++; + + if (status & MCFUART_USR_RXERR) { + writeb(MCFUART_UCR_CMDRESETERR, + port->membase + MCFUART_UCR); + + if (status & MCFUART_USR_RXBREAK) { + port->icount.brk++; + if (uart_handle_break(port)) + continue; + } else if (status & MCFUART_USR_RXPARITY) { + port->icount.parity++; + } else if (status & MCFUART_USR_RXOVERRUN) { + port->icount.overrun++; + } else if (status & MCFUART_USR_RXFRAMING) { + port->icount.frame++; + } + + status &= port->read_status_mask; + + if (status & MCFUART_USR_RXBREAK) + flag = TTY_BREAK; + else if (status & MCFUART_USR_RXPARITY) + flag = TTY_PARITY; + else if (status & MCFUART_USR_RXFRAMING) + flag = TTY_FRAME; + } + + if (uart_handle_sysrq_char(port, ch)) + continue; + uart_insert_char(port, status, MCFUART_USR_RXOVERRUN, ch, flag); + } + + tty_flip_buffer_push(port->info->tty); +} + +/****************************************************************************/ + +static void mcf_tx_chars(struct mcf_uart *pp) +{ + struct uart_port *port = (struct uart_port *) pp; + struct circ_buf *xmit = &port->info->xmit; + + if (port->x_char) { + /* Send special char - probably flow control */ + writeb(port->x_char, port->membase + MCFUART_UTB); + port->x_char = 0; + port->icount.tx++; + return; + } + + while (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) { + if (xmit->head == xmit->tail) + break; + writeb(xmit->buf[xmit->tail], port->membase + MCFUART_UTB); + xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE -1); + port->icount.tx++; + } + + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(port); + + if (xmit->head == xmit->tail) { + pp->imr &= ~MCFUART_UIR_TXREADY; + writeb(pp->imr, port->membase + MCFUART_UIMR); + } +} + +/****************************************************************************/ + +static irqreturn_t mcf_interrupt(int irq, void *data) +{ + struct uart_port *port = data; + struct mcf_uart *pp = (struct mcf_uart *) port; + unsigned int isr; + + isr = readb(port->membase + MCFUART_UISR) & pp->imr; + if (isr & MCFUART_UIR_RXREADY) + mcf_rx_chars(pp); + if (isr & MCFUART_UIR_TXREADY) + mcf_tx_chars(pp); + return IRQ_HANDLED; +} + +/****************************************************************************/ + +static void mcf_config_port(struct uart_port *port, int flags) +{ + port->type = PORT_MCF; + + /* Clear mask, so no surprise interrupts. */ + writeb(0, port->membase + MCFUART_UIMR); + + if (request_irq(port->irq, mcf_interrupt, IRQF_DISABLED, "UART", port)) + printk(KERN_ERR "MCF: unable to attach ColdFire UART %d " + "interrupt vector=%d\n", port->line, port->irq); +} + +/****************************************************************************/ + +static const char *mcf_type(struct uart_port *port) +{ + return (port->type == PORT_MCF) ? "ColdFire UART" : NULL; +} + +/****************************************************************************/ + +static int mcf_request_port(struct uart_port *port) +{ + /* UARTs always present */ + return 0; +} + +/****************************************************************************/ + +static void mcf_release_port(struct uart_port *port) +{ + /* Nothing to release... */ +} + +/****************************************************************************/ + +static int mcf_verify_port(struct uart_port *port, struct serial_struct *ser) +{ + if ((ser->type != PORT_UNKNOWN) && (ser->type != PORT_MCF)) + return -EINVAL; + return 0; +} + +/****************************************************************************/ + +/* + * Define the basic serial functions we support. + */ +static struct uart_ops mcf_uart_ops = { + .tx_empty = mcf_tx_empty, + .get_mctrl = mcf_get_mctrl, + .set_mctrl = mcf_set_mctrl, + .start_tx = mcf_start_tx, + .stop_tx = mcf_stop_tx, + .stop_rx = mcf_stop_rx, + .enable_ms = mcf_enable_ms, + .break_ctl = mcf_break_ctl, + .startup = mcf_startup, + .shutdown = mcf_shutdown, + .set_termios = mcf_set_termios, + .type = mcf_type, + .request_port = mcf_request_port, + .release_port = mcf_release_port, + .config_port = mcf_config_port, + .verify_port = mcf_verify_port, +}; + +static struct mcf_uart mcf_ports[3]; + +#define MCF_MAXPORTS (sizeof(mcf_ports) / sizeof(struct mcf_uart)) + +/****************************************************************************/ +#if defined(CONFIG_SERIAL_MCF_CONSOLE) +/****************************************************************************/ + +int __init early_mcf_setup(struct mcf_platform_uart *platp) +{ + struct uart_port *port; + int i; + + for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) { + port = &mcf_ports[i].port; + + port->line = i; + port->type = PORT_MCF; + port->mapbase = platp[i].mapbase; + port->membase = (platp[i].membase) ? platp[i].membase : + (unsigned char __iomem *) port->mapbase; + port->iotype = SERIAL_IO_MEM; + port->irq = platp[i].irq; + port->uartclk = MCF_BUSCLK; + port->flags = ASYNC_BOOT_AUTOCONF; + port->ops = &mcf_uart_ops; + } + + return 0; +} + +/****************************************************************************/ + +static void mcf_console_putc(struct console *co, const char c) +{ + struct uart_port *port = &(mcf_ports + co->index)->port; + int i; + + for (i = 0; (i < 0x10000); i++) { + if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) + break; + } + writeb(c, port->membase + MCFUART_UTB); + for (i = 0; (i < 0x10000); i++) { + if (readb(port->membase + MCFUART_USR) & MCFUART_USR_TXREADY) + break; + } +} + +/****************************************************************************/ + +static void mcf_console_write(struct console *co, const char *s, unsigned int count) +{ + for (; (count); count--, s++) { + mcf_console_putc(co, *s); + if (*s == '\n') + mcf_console_putc(co, '\r'); + } +} + +/****************************************************************************/ + +static int __init mcf_console_setup(struct console *co, char *options) +{ + struct uart_port *port; + int baud = CONFIG_SERIAL_MCF_BAUDRATE; + int bits = 8; + int parity = 'n'; + int flow = 'n'; + + if ((co->index >= 0) && (co->index <= MCF_MAXPORTS)) + co->index = 0; + port = &mcf_ports[co->index].port; + if (port->membase == 0) + return -ENODEV; + + if (options) + uart_parse_options(options, &baud, &parity, &bits, &flow); + + return uart_set_options(port, co, baud, parity, bits, flow); +} + +/****************************************************************************/ + +static struct uart_driver mcf_driver; + +static struct console mcf_console = { + .name = "ttyS", + .write = mcf_console_write, + .device = uart_console_device, + .setup = mcf_console_setup, + .flags = CON_PRINTBUFFER, + .index = -1, + .data = &mcf_driver, +}; + +static int __init mcf_console_init(void) +{ + register_console(&mcf_console); + return 0; +} + +console_initcall(mcf_console_init); + +#define MCF_CONSOLE &mcf_console + +/****************************************************************************/ +#else +/****************************************************************************/ + +#define MCF_CONSOLE NULL + +/****************************************************************************/ +#endif /* CONFIG_MCF_CONSOLE */ +/****************************************************************************/ + +/* + * Define the mcf UART driver structure. + */ +static struct uart_driver mcf_driver = { + .owner = THIS_MODULE, + .driver_name = "mcf", + .dev_name = "ttyS", + .major = TTY_MAJOR, + .minor = 64, + .nr = MCF_MAXPORTS, + .cons = MCF_CONSOLE, +}; + +/****************************************************************************/ + +static int __devinit mcf_probe(struct platform_device *pdev) +{ + struct mcf_platform_uart *platp = pdev->dev.platform_data; + struct uart_port *port; + int i; + + for (i = 0; ((i < MCF_MAXPORTS) && (platp[i].mapbase)); i++) { + port = &mcf_ports[i].port; + + port->line = i; + port->type = PORT_MCF; + port->mapbase = platp[i].mapbase; + port->membase = (platp[i].membase) ? platp[i].membase : + (unsigned char __iomem *) platp[i].mapbase; + port->iotype = SERIAL_IO_MEM; + port->irq = platp[i].irq; + port->uartclk = MCF_BUSCLK; + port->ops = &mcf_uart_ops; + port->flags = ASYNC_BOOT_AUTOCONF; + + uart_add_one_port(&mcf_driver, port); + } + + return 0; +} + +/****************************************************************************/ + +static int mcf_remove(struct platform_device *pdev) +{ + struct uart_port *port; + int i; + + for (i = 0; (i < MCF_MAXPORTS); i++) { + port = &mcf_ports[i].port; + if (port) + uart_remove_one_port(&mcf_driver, port); + } + + return 0; +} + +/****************************************************************************/ + +static struct platform_driver mcf_platform_driver = { + .probe = mcf_probe, + .remove = __devexit_p(mcf_remove), + .driver = { + .name = "mcfuart", + .owner = THIS_MODULE, + }, +}; + +/****************************************************************************/ + +static int __init mcf_init(void) +{ + int rc; + + printk("ColdFire internal UART serial driver\n"); + + rc = uart_register_driver(&mcf_driver); + if (rc) + return rc; + rc = platform_driver_register(&mcf_platform_driver); + if (rc) + return rc; + return 0; +} + +/****************************************************************************/ + +static void __exit mcf_exit(void) +{ + platform_driver_unregister(&mcf_platform_driver); + uart_unregister_driver(&mcf_driver); +} + +/****************************************************************************/ + +module_init(mcf_init); +module_exit(mcf_exit); + +MODULE_AUTHOR("Greg Ungerer <gerg@snapgear.com>"); +MODULE_DESCRIPTION("Freescale ColdFire UART driver"); +MODULE_LICENSE("GPL"); + +/****************************************************************************/ diff --git a/include/asm-m68knommu/module.h b/include/asm-m68knommu/module.h index 57e95cc01ad..2e45ab50b23 100644 --- a/include/asm-m68knommu/module.h +++ b/include/asm-m68knommu/module.h @@ -1 +1,11 @@ -#include <asm-m68k/module.h> +#ifndef ASM_M68KNOMMU_MODULE_H +#define ASM_M68KNOMMU_MODULE_H + +struct mod_arch_specific { +}; + +#define Elf_Shdr Elf32_Shdr +#define Elf_Sym Elf32_Sym +#define Elf_Ehdr Elf32_Ehdr + +#endif /* ASM_M68KNOMMU_MODULE_H */ diff --git a/include/asm-m68knommu/uaccess.h b/include/asm-m68knommu/uaccess.h index 9ed9169a884..68bbe9b312f 100644 --- a/include/asm-m68knommu/uaccess.h +++ b/include/asm-m68knommu/uaccess.h @@ -170,10 +170,12 @@ static inline long strnlen_user(const char *src, long n) */ static inline unsigned long -clear_user(void *to, unsigned long n) +__clear_user(void *to, unsigned long n) { memset(to, 0, n); return 0; } +#define clear_user(to,n) __clear_user(to,n) + #endif /* _M68KNOMMU_UACCESS_H */ diff --git a/include/sound/version.h b/include/sound/version.h index 8d4a8dd8923..a2be8ad8894 100644 --- a/include/sound/version.h +++ b/include/sound/version.h @@ -1,3 +1,3 @@ /* include/version.h. Generated by alsa/ksync script. */ #define CONFIG_SND_VERSION "1.0.15" -#define CONFIG_SND_DATE " (Tue Oct 16 14:57:44 2007 UTC)" +#define CONFIG_SND_DATE " (Tue Oct 23 06:09:18 2007 UTC)" diff --git a/mm/mmap.c b/mm/mmap.c index 7a30c498823..facc1a75bd4 100644 --- a/mm/mmap.c +++ b/mm/mmap.c @@ -1171,8 +1171,7 @@ munmap_back: vm_flags = vma->vm_flags; if (vma_wants_writenotify(vma)) - vma->vm_page_prot = - protection_map[vm_flags & (VM_READ|VM_WRITE|VM_EXEC)]; + vma->vm_page_prot = vm_get_page_prot(vm_flags & ~VM_SHARED); if (!file || !vma_merge(mm, prev, addr, vma->vm_end, vma->vm_flags, NULL, file, pgoff, vma_policy(vma))) { diff --git a/mm/mprotect.c b/mm/mprotect.c index 55227845abb..4de546899dc 100644 --- a/mm/mprotect.c +++ b/mm/mprotect.c @@ -194,7 +194,7 @@ success: vma->vm_flags = newflags; vma->vm_page_prot = vm_get_page_prot(newflags); if (vma_wants_writenotify(vma)) { - vma->vm_page_prot = vm_get_page_prot(newflags); + vma->vm_page_prot = vm_get_page_prot(newflags & ~VM_SHARED); dirty_accountable = 1; } diff --git a/sound/core/control.c b/sound/core/control.c index 4c3aa8e1037..df0774c76f6 100644 --- a/sound/core/control.c +++ b/sound/core/control.c @@ -93,15 +93,16 @@ static int snd_ctl_open(struct inode *inode, struct file *file) static void snd_ctl_empty_read_queue(struct snd_ctl_file * ctl) { + unsigned long flags; struct snd_kctl_event *cread; - spin_lock(&ctl->read_lock); + spin_lock_irqsave(&ctl->read_lock, flags); while (!list_empty(&ctl->events)) { cread = snd_kctl_event(ctl->events.next); list_del(&cread->list); kfree(cread); } - spin_unlock(&ctl->read_lock); + spin_unlock_irqrestore(&ctl->read_lock, flags); } static int snd_ctl_release(struct inode *inode, struct file *file) diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c index 91f9e6a112f..2dba752faf4 100644 --- a/sound/pci/bt87x.c +++ b/sound/pci/bt87x.c @@ -165,7 +165,7 @@ struct snd_bt87x_board { unsigned no_digital:1; /* No digital input */ }; -static const __devinitdata struct snd_bt87x_board snd_bt87x_boards[] = { +static __devinitdata struct snd_bt87x_board snd_bt87x_boards[] = { [SND_BT87X_BOARD_UNKNOWN] = { .dig_rate = 32000, /* just a guess */ }, @@ -848,7 +848,7 @@ static int __devinit snd_bt87x_detect_card(struct pci_dev *pci) int i; const struct pci_device_id *supported; - supported = pci_match_device(&driver, pci); + supported = pci_match_id(snd_bt87x_ids, pci); if (supported && supported->driver_data > 0) return supported->driver_data; diff --git a/sound/pci/hda/hda_codec.c b/sound/pci/hda/hda_codec.c index 187533e477c..ad4cb38109f 100644 --- a/sound/pci/hda/hda_codec.c +++ b/sound/pci/hda/hda_codec.c @@ -626,24 +626,19 @@ int __devinit snd_hda_codec_new(struct hda_bus *bus, unsigned int codec_addr, snd_hda_get_codec_name(codec, bus->card->mixername, sizeof(bus->card->mixername)); -#ifdef CONFIG_SND_HDA_GENERIC if (is_generic_config(codec)) { err = snd_hda_parse_generic_codec(codec); goto patched; } -#endif if (codec->preset && codec->preset->patch) { err = codec->preset->patch(codec); goto patched; } /* call the default parser */ -#ifdef CONFIG_SND_HDA_GENERIC err = snd_hda_parse_generic_codec(codec); -#else - printk(KERN_ERR "hda-codec: No codec parser is available\n"); - err = -ENODEV; -#endif + if (err < 0) + printk(KERN_ERR "hda-codec: No codec parser is available\n"); patched: if (err < 0) { diff --git a/sound/pci/hda/hda_local.h b/sound/pci/hda/hda_local.h index a79d0ed5469..20c5e625037 100644 --- a/sound/pci/hda/hda_local.h +++ b/sound/pci/hda/hda_local.h @@ -245,7 +245,14 @@ int snd_hda_multi_out_analog_cleanup(struct hda_codec *codec, /* * generic codec parser */ +#ifdef CONFIG_SND_HDA_GENERIC int snd_hda_parse_generic_codec(struct hda_codec *codec); +#else +static inline int snd_hda_parse_generic_codec(struct hda_codec *codec) +{ + return -ENODEV; +} +#endif /* * generic proc interface @@ -303,16 +310,17 @@ enum { extern const char *auto_pin_cfg_labels[AUTO_PIN_LAST]; +#define AUTO_CFG_MAX_OUTS 5 + struct auto_pin_cfg { int line_outs; - hda_nid_t line_out_pins[5]; /* sorted in the order of - * Front/Surr/CLFE/Side - */ + /* sorted in the order of Front/Surr/CLFE/Side */ + hda_nid_t line_out_pins[AUTO_CFG_MAX_OUTS]; int speaker_outs; - hda_nid_t speaker_pins[5]; + hda_nid_t speaker_pins[AUTO_CFG_MAX_OUTS]; int hp_outs; int line_out_type; /* AUTO_PIN_XXX_OUT */ - hda_nid_t hp_pins[5]; + hda_nid_t hp_pins[AUTO_CFG_MAX_OUTS]; hda_nid_t input_pins[AUTO_PIN_LAST]; hda_nid_t dig_out_pin; hda_nid_t dig_in_pin; diff --git a/sound/pci/hda/patch_analog.c b/sound/pci/hda/patch_analog.c index 54cfd4526d2..0ee8ae4d441 100644 --- a/sound/pci/hda/patch_analog.c +++ b/sound/pci/hda/patch_analog.c @@ -72,7 +72,7 @@ struct ad198x_spec { unsigned int num_kctl_alloc, num_kctl_used; struct snd_kcontrol_new *kctl_alloc; struct hda_input_mux private_imux; - hda_nid_t private_dac_nids[4]; + hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS]; unsigned int jack_present :1; @@ -612,7 +612,8 @@ static void ad1986a_hp_automute(struct hda_codec *codec) unsigned int present; present = snd_hda_codec_read(codec, 0x1a, 0, AC_VERB_GET_PIN_SENSE, 0); - spec->jack_present = (present & 0x80000000) != 0; + /* Lenovo N100 seems to report the reversed bit for HP jack-sensing */ + spec->jack_present = !(present & 0x80000000); ad1986a_update_hp(codec); } diff --git a/sound/pci/hda/patch_cmedia.c b/sound/pci/hda/patch_cmedia.c index 2468f317122..6c54793bf42 100644 --- a/sound/pci/hda/patch_cmedia.c +++ b/sound/pci/hda/patch_cmedia.c @@ -50,7 +50,7 @@ struct cmi_spec { /* playback */ struct hda_multi_out multiout; - hda_nid_t dac_nids[4]; /* NID for each DAC */ + hda_nid_t dac_nids[AUTO_CFG_MAX_OUTS]; /* NID for each DAC */ int num_dacs; /* capture */ @@ -73,7 +73,6 @@ struct cmi_spec { unsigned int pin_def_confs; /* multichannel pins */ - hda_nid_t multich_pin[4]; /* max 8-channel */ struct hda_verb multi_init[9]; /* 2 verbs for each pin + terminator */ }; diff --git a/sound/pci/hda/patch_conexant.c b/sound/pci/hda/patch_conexant.c index 080e3001d9c..6aa07398674 100644 --- a/sound/pci/hda/patch_conexant.c +++ b/sound/pci/hda/patch_conexant.c @@ -85,7 +85,7 @@ struct conexant_spec { unsigned int num_kctl_alloc, num_kctl_used; struct snd_kcontrol_new *kctl_alloc; struct hda_input_mux private_imux; - hda_nid_t private_dac_nids[4]; + hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS]; }; @@ -554,10 +554,16 @@ static struct snd_kcontrol_new cxt5045_mixers[] = { .get = conexant_mux_enum_get, .put = conexant_mux_enum_put }, - HDA_CODEC_VOLUME("Int Mic Volume", 0x1a, 0x01, HDA_INPUT), - HDA_CODEC_MUTE("Int Mic Switch", 0x1a, 0x01, HDA_INPUT), - HDA_CODEC_VOLUME("Ext Mic Volume", 0x1a, 0x02, HDA_INPUT), - HDA_CODEC_MUTE("Ext Mic Switch", 0x1a, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("Int Mic Capture Volume", 0x1a, 0x01, HDA_INPUT), + HDA_CODEC_MUTE("Int Mic Capture Switch", 0x1a, 0x01, HDA_INPUT), + HDA_CODEC_VOLUME("Ext Mic Capture Volume", 0x1a, 0x02, HDA_INPUT), + HDA_CODEC_MUTE("Ext Mic Capture Switch", 0x1a, 0x02, HDA_INPUT), + HDA_CODEC_VOLUME("PCM Playback Volume", 0x17, 0x0, HDA_INPUT), + HDA_CODEC_MUTE("PCM Playback Switch", 0x17, 0x0, HDA_INPUT), + HDA_CODEC_VOLUME("Int Mic Playback Volume", 0x17, 0x1, HDA_INPUT), + HDA_CODEC_MUTE("Int Mic Playback Switch", 0x17, 0x1, HDA_INPUT), + HDA_CODEC_VOLUME("Ext Mic Playback Volume", 0x17, 0x2, HDA_INPUT), + HDA_CODEC_MUTE("Ext Mic Playback Switch", 0x17, 0x2, HDA_INPUT), HDA_BIND_VOL("Master Playback Volume", &cxt5045_hp_bind_master_vol), { .iface = SNDRV_CTL_ELEM_IFACE_MIXER, @@ -576,16 +582,15 @@ static struct hda_verb cxt5045_init_verbs[] = { {0x12, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN }, {0x14, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_IN|AC_PINCTL_VREF_80 }, /* HP, Amp */ - {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP }, - {0x17, AC_VERB_SET_CONNECT_SEL,0x01}, - {0x17, AC_VERB_SET_AMP_GAIN_MUTE, - AC_AMP_SET_OUTPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x01}, - {0x17, AC_VERB_SET_AMP_GAIN_MUTE, - AC_AMP_SET_OUTPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x02}, - {0x17, AC_VERB_SET_AMP_GAIN_MUTE, - AC_AMP_SET_OUTPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x03}, - {0x17, AC_VERB_SET_AMP_GAIN_MUTE, - AC_AMP_SET_OUTPUT|AC_AMP_SET_RIGHT|AC_AMP_SET_LEFT|0x04}, + {0x10, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_OUT}, + {0x10, AC_VERB_SET_CONNECT_SEL, 0x1}, + {0x11, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_HP}, + {0x11, AC_VERB_SET_CONNECT_SEL, 0x1}, + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(0)}, + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(1)}, + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(2)}, + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(3)}, + {0x17, AC_VERB_SET_AMP_GAIN_MUTE, AMP_IN_MUTE(4)}, /* Record selector: Int mic */ {0x1a, AC_VERB_SET_CONNECT_SEL,0x1}, {0x1a, AC_VERB_SET_AMP_GAIN_MUTE, diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c index 53b0428abfc..d9f78c809ee 100644 --- a/sound/pci/hda/patch_realtek.c +++ b/sound/pci/hda/patch_realtek.c @@ -238,7 +238,7 @@ struct alc_spec { unsigned int num_kctl_alloc, num_kctl_used; struct snd_kcontrol_new *kctl_alloc; struct hda_input_mux private_imux; - hda_nid_t private_dac_nids[5]; + hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS]; /* hooks */ void (*init_hook)(struct hda_codec *codec); diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c index bf950195107..f9b2c435a13 100644 --- a/sound/pci/hda/patch_sigmatel.c +++ b/sound/pci/hda/patch_sigmatel.c @@ -111,6 +111,7 @@ struct sigmatel_spec { unsigned int alt_switch: 1; unsigned int hp_detect: 1; unsigned int gpio_mute: 1; + unsigned int no_vol_knob :1; unsigned int gpio_mask, gpio_data; @@ -1930,7 +1931,8 @@ static int stac92xx_auto_create_hp_ctls(struct hda_codec *codec, } if (spec->multiout.hp_nid) { const char *pfx; - if (old_num_dacs == spec->multiout.num_dacs) + if (old_num_dacs == spec->multiout.num_dacs && + spec->no_vol_knob) pfx = "Master"; else pfx = "Headphone"; @@ -2487,6 +2489,7 @@ static int patch_stac9200(struct hda_codec *codec) codec->spec = spec; spec->num_pins = ARRAY_SIZE(stac9200_pin_nids); spec->pin_nids = stac9200_pin_nids; + spec->no_vol_knob = 1; spec->board_config = snd_hda_check_board_config(codec, STAC_9200_MODELS, stac9200_models, stac9200_cfg_tbl); @@ -2541,6 +2544,7 @@ static int patch_stac925x(struct hda_codec *codec) codec->spec = spec; spec->num_pins = ARRAY_SIZE(stac925x_pin_nids); spec->pin_nids = stac925x_pin_nids; + spec->no_vol_knob = 1; spec->board_config = snd_hda_check_board_config(codec, STAC_925x_MODELS, stac925x_models, stac925x_cfg_tbl); diff --git a/sound/pci/hda/patch_via.c b/sound/pci/hda/patch_via.c index 33b5e1ffa81..4cdf3e6df4b 100644 --- a/sound/pci/hda/patch_via.c +++ b/sound/pci/hda/patch_via.c @@ -114,7 +114,7 @@ struct via_spec { unsigned int num_kctl_alloc, num_kctl_used; struct snd_kcontrol_new *kctl_alloc; struct hda_input_mux private_imux; - hda_nid_t private_dac_nids[4]; + hda_nid_t private_dac_nids[AUTO_CFG_MAX_OUTS]; #ifdef CONFIG_SND_HDA_POWER_SAVE struct hda_loopback_check loopback; diff --git a/sound/sh/aica.c b/sound/sh/aica.c index 131ec481228..88dc840152c 100644 --- a/sound/sh/aica.c +++ b/sound/sh/aica.c @@ -106,11 +106,14 @@ static void spu_write_wait(void) static void spu_memset(u32 toi, u32 what, int length) { int i; + unsigned long flags; snd_assert(length % 4 == 0, return); for (i = 0; i < length; i++) { if (!(i % 8)) spu_write_wait(); + local_irq_save(flags); writel(what, toi + SPU_MEMORY_BASE); + local_irq_restore(flags); toi++; } } @@ -118,6 +121,7 @@ static void spu_memset(u32 toi, u32 what, int length) /* spu_memload - write to SPU address space */ static void spu_memload(u32 toi, void *from, int length) { + unsigned long flags; u32 *froml = from; u32 __iomem *to = (u32 __iomem *) (SPU_MEMORY_BASE + toi); int i; @@ -128,7 +132,9 @@ static void spu_memload(u32 toi, void *from, int length) if (!(i % 8)) spu_write_wait(); val = *froml; + local_irq_save(flags); writel(val, to); + local_irq_restore(flags); froml++; to++; } @@ -138,28 +144,36 @@ static void spu_memload(u32 toi, void *from, int length) static void spu_disable(void) { int i; + unsigned long flags; u32 regval; spu_write_wait(); regval = readl(ARM_RESET_REGISTER); regval |= 1; spu_write_wait(); + local_irq_save(flags); writel(regval, ARM_RESET_REGISTER); + local_irq_restore(flags); for (i = 0; i < 64; i++) { spu_write_wait(); regval = readl(SPU_REGISTER_BASE + (i * 0x80)); regval = (regval & ~0x4000) | 0x8000; spu_write_wait(); + local_irq_save(flags); writel(regval, SPU_REGISTER_BASE + (i * 0x80)); + local_irq_restore(flags); } } /* spu_enable - set spu registers to enable sound output */ static void spu_enable(void) { + unsigned long flags; u32 regval = readl(ARM_RESET_REGISTER); regval &= ~1; spu_write_wait(); + local_irq_save(flags); writel(regval, ARM_RESET_REGISTER); + local_irq_restore(flags); } /* @@ -168,25 +182,34 @@ static void spu_enable(void) */ static void spu_reset(void) { + unsigned long flags; spu_disable(); spu_memset(0, 0, 0x200000 / 4); /* Put ARM7 in endless loop */ + local_irq_save(flags); ctrl_outl(0xea000002, SPU_MEMORY_BASE); + local_irq_restore(flags); spu_enable(); } /* aica_chn_start - write to spu to start playback */ static void aica_chn_start(void) { + unsigned long flags; spu_write_wait(); + local_irq_save(flags); writel(AICA_CMD_KICK | AICA_CMD_START, (u32 *) AICA_CONTROL_POINT); + local_irq_restore(flags); } /* aica_chn_halt - write to spu to halt playback */ static void aica_chn_halt(void) { + unsigned long flags; spu_write_wait(); + local_irq_save(flags); writel(AICA_CMD_KICK | AICA_CMD_STOP, (u32 *) AICA_CONTROL_POINT); + local_irq_restore(flags); } /* ALSA code below */ @@ -213,12 +236,13 @@ static int aica_dma_transfer(int channels, int buffer_size, int q, err, period_offset; struct snd_card_aica *dreamcastcard; struct snd_pcm_runtime *runtime; - err = 0; + unsigned long flags; dreamcastcard = substream->pcm->private_data; period_offset = dreamcastcard->clicks; period_offset %= (AICA_PERIOD_NUMBER / channels); runtime = substream->runtime; for (q = 0; q < channels; q++) { + local_irq_save(flags); err = dma_xfer(AICA_DMA_CHANNEL, (unsigned long) (runtime->dma_area + (AICA_BUFFER_SIZE * q) / @@ -228,9 +252,12 @@ static int aica_dma_transfer(int channels, int buffer_size, AICA_CHANNEL0_OFFSET + q * CHANNEL_OFFSET + AICA_PERIOD_SIZE * period_offset, buffer_size / channels, AICA_DMA_MODE); - if (unlikely(err < 0)) + if (unlikely(err < 0)) { + local_irq_restore(flags); break; + } dma_wait_for_completion(AICA_DMA_CHANNEL); + local_irq_restore(flags); } return err; } diff --git a/sound/sparc/cs4231.c b/sound/sparc/cs4231.c index 9785382a5f3..f8c7a120ccb 100644 --- a/sound/sparc/cs4231.c +++ b/sound/sparc/cs4231.c @@ -400,65 +400,44 @@ static void snd_cs4231_mce_up(struct snd_cs4231 *chip) static void snd_cs4231_mce_down(struct snd_cs4231 *chip) { - unsigned long flags; - unsigned long end_time; - int timeout; + unsigned long flags, timeout; + int reg; - spin_lock_irqsave(&chip->lock, flags); snd_cs4231_busy_wait(chip); + spin_lock_irqsave(&chip->lock, flags); #ifdef CONFIG_SND_DEBUG if (__cs4231_readb(chip, CS4231U(chip, REGSEL)) & CS4231_INIT) snd_printdd("mce_down [%p] - auto calibration time out (0)\n", CS4231U(chip, REGSEL)); #endif chip->mce_bit &= ~CS4231_MCE; - timeout = __cs4231_readb(chip, CS4231U(chip, REGSEL)); - __cs4231_writeb(chip, chip->mce_bit | (timeout & 0x1f), + reg = __cs4231_readb(chip, CS4231U(chip, REGSEL)); + __cs4231_writeb(chip, chip->mce_bit | (reg & 0x1f), CS4231U(chip, REGSEL)); - if (timeout == 0x80) - snd_printdd("mce_down [%p]: serious init problem - " - "codec still busy\n", - chip->port); - if ((timeout & CS4231_MCE) == 0) { + if (reg == 0x80) + snd_printdd("mce_down [%p]: serious init problem " + "- codec still busy\n", chip->port); + if ((reg & CS4231_MCE) == 0) { spin_unlock_irqrestore(&chip->lock, flags); return; } /* - * Wait for (possible -- during init auto-calibration may not be set) - * calibration process to start. Needs upto 5 sample periods on AD1848 - * which at the slowest possible rate of 5.5125 kHz means 907 us. + * Wait for auto-calibration (AC) process to finish, i.e. ACI to go low. */ - msleep(1); - - /* check condition up to 250ms */ - end_time = jiffies + msecs_to_jiffies(250); - while (snd_cs4231_in(chip, CS4231_TEST_INIT) & - CS4231_CALIB_IN_PROGRESS) { - + timeout = jiffies + msecs_to_jiffies(250); + do { spin_unlock_irqrestore(&chip->lock, flags); - if (time_after(jiffies, end_time)) { - snd_printk("mce_down - " - "auto calibration time out (2)\n"); - return; - } - msleep(1); - spin_lock_irqsave(&chip->lock, flags); - } - - /* check condition up to 100ms */ - end_time = jiffies + msecs_to_jiffies(100); - while (__cs4231_readb(chip, CS4231U(chip, REGSEL)) & CS4231_INIT) { - spin_unlock_irqrestore(&chip->lock, flags); - if (time_after(jiffies, end_time)) { - snd_printk("mce_down - " - "auto calibration time out (3)\n"); - return; - } msleep(1); spin_lock_irqsave(&chip->lock, flags); - } + reg = snd_cs4231_in(chip, CS4231_TEST_INIT); + reg &= CS4231_CALIB_IN_PROGRESS; + } while (reg && time_before(jiffies, timeout)); spin_unlock_irqrestore(&chip->lock, flags); + + if (reg) + snd_printk(KERN_ERR + "mce_down - auto calibration time out (2)\n"); } static void snd_cs4231_advance_dma(struct cs4231_dma_control *dma_cont, diff --git a/sound/usb/usbquirks.h b/sound/usb/usbquirks.h index 743568f8990..59410f43770 100644 --- a/sound/usb/usbquirks.h +++ b/sound/usb/usbquirks.h @@ -84,6 +84,15 @@ USB_DEVICE_ID_MATCH_INT_CLASS | USB_DEVICE_ID_MATCH_INT_SUBCLASS, .idVendor = 0x046d, + .idProduct = 0x08f5, + .bInterfaceClass = USB_CLASS_AUDIO, + .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL +}, +{ + .match_flags = USB_DEVICE_ID_MATCH_DEVICE | + USB_DEVICE_ID_MATCH_INT_CLASS | + USB_DEVICE_ID_MATCH_INT_SUBCLASS, + .idVendor = 0x046d, .idProduct = 0x08f6, .bInterfaceClass = USB_CLASS_AUDIO, .bInterfaceSubClass = USB_SUBCLASS_AUDIO_CONTROL |