aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/net/wireless/ath/regd.c10
-rw-r--r--include/net/cfg80211.h14
-rw-r--r--net/wireless/reg.c201
3 files changed, 175 insertions, 50 deletions
diff --git a/drivers/net/wireless/ath/regd.c b/drivers/net/wireless/ath/regd.c
index fdf07c82208..7a89f9fac7d 100644
--- a/drivers/net/wireless/ath/regd.c
+++ b/drivers/net/wireless/ath/regd.c
@@ -200,8 +200,10 @@ ath_reg_apply_beaconing_flags(struct wiphy *wiphy,
continue;
if (initiator == NL80211_REGDOM_SET_BY_COUNTRY_IE) {
- r = freq_reg_info(wiphy, ch->center_freq,
- &bandwidth, &reg_rule);
+ r = freq_reg_info(wiphy,
+ ch->center_freq,
+ bandwidth,
+ &reg_rule);
if (r)
continue;
/*
@@ -265,7 +267,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy,
*/
ch = &sband->channels[11]; /* CH 12 */
- r = freq_reg_info(wiphy, ch->center_freq, &bandwidth, &reg_rule);
+ r = freq_reg_info(wiphy, ch->center_freq, bandwidth, &reg_rule);
if (!r) {
if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
@@ -273,7 +275,7 @@ ath_reg_apply_active_scan_flags(struct wiphy *wiphy,
}
ch = &sband->channels[12]; /* CH 13 */
- r = freq_reg_info(wiphy, ch->center_freq, &bandwidth, &reg_rule);
+ r = freq_reg_info(wiphy, ch->center_freq, bandwidth, &reg_rule);
if (!r) {
if (!(reg_rule->flags & NL80211_RRF_PASSIVE_SCAN))
if (ch->flags & IEEE80211_CHAN_PASSIVE_SCAN)
diff --git a/include/net/cfg80211.h b/include/net/cfg80211.h
index 9e17a83d343..282d58d52fc 100644
--- a/include/net/cfg80211.h
+++ b/include/net/cfg80211.h
@@ -70,6 +70,9 @@ enum ieee80211_channel_flags {
IEEE80211_CHAN_NO_FAT_BELOW = 1<<5,
};
+#define IEEE80211_CHAN_NO_HT40 \
+ (IEEE80211_CHAN_NO_FAT_ABOVE | IEEE80211_CHAN_NO_FAT_BELOW)
+
/**
* struct ieee80211_channel - channel definition
*
@@ -1303,9 +1306,10 @@ extern void wiphy_apply_custom_regulatory(
* freq_reg_info - get regulatory information for the given frequency
* @wiphy: the wiphy for which we want to process this rule for
* @center_freq: Frequency in KHz for which we want regulatory information for
- * @bandwidth: the bandwidth requirement you have in KHz, if you do not have one
- * you can set this to 0. If this frequency is allowed we then set
- * this value to the maximum allowed bandwidth.
+ * @desired_bw_khz: the desired max bandwidth you want to use per
+ * channel. Note that this is still 20 MHz if you want to use HT40
+ * as HT40 makes use of two channels for its 40 MHz width bandwidth.
+ * If set to 0 we'll assume you want the standard 20 MHz.
* @reg_rule: the regulatory rule which we have for this frequency
*
* Use this function to get the regulatory rule for a specific frequency on
@@ -1320,7 +1324,9 @@ extern void wiphy_apply_custom_regulatory(
* freq_in_rule_band() for our current definition of a band -- this is purely
* subjective and right now its 802.11 specific.
*/
-extern int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth,
+extern int freq_reg_info(struct wiphy *wiphy,
+ u32 center_freq,
+ u32 desired_bw_khz,
const struct ieee80211_reg_rule **reg_rule);
/*
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 537af62ec42..d897528ee7f 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -48,12 +48,6 @@ static struct regulatory_request *last_request;
/* To trigger userspace events */
static struct platform_device *reg_pdev;
-/* Keep the ordering from large to small */
-static u32 supported_bandwidths[] = {
- MHZ_TO_KHZ(40),
- MHZ_TO_KHZ(20),
-};
-
/*
* Central wireless core regulatory domains, we only need two,
* the current one and a world regulatory domain in case we have no
@@ -435,19 +429,20 @@ static bool is_valid_rd(const struct ieee80211_regdomain *rd)
return true;
}
-/* Returns value in KHz */
-static u32 freq_max_bandwidth(const struct ieee80211_freq_range *freq_range,
- u32 freq)
+static bool reg_does_bw_fit(const struct ieee80211_freq_range *freq_range,
+ u32 center_freq_khz,
+ u32 bw_khz)
{
- unsigned int i;
- for (i = 0; i < ARRAY_SIZE(supported_bandwidths); i++) {
- u32 start_freq_khz = freq - supported_bandwidths[i]/2;
- u32 end_freq_khz = freq + supported_bandwidths[i]/2;
- if (start_freq_khz >= freq_range->start_freq_khz &&
- end_freq_khz <= freq_range->end_freq_khz)
- return supported_bandwidths[i];
- }
- return 0;
+ u32 start_freq_khz, end_freq_khz;
+
+ start_freq_khz = center_freq_khz - (bw_khz/2);
+ end_freq_khz = center_freq_khz + (bw_khz/2);
+
+ if (start_freq_khz >= freq_range->start_freq_khz &&
+ end_freq_khz <= freq_range->end_freq_khz)
+ return true;
+
+ return false;
}
/**
@@ -847,14 +842,17 @@ static u32 map_regdom_flags(u32 rd_flags)
static int freq_reg_info_regd(struct wiphy *wiphy,
u32 center_freq,
- u32 *bandwidth,
+ u32 desired_bw_khz,
const struct ieee80211_reg_rule **reg_rule,
const struct ieee80211_regdomain *custom_regd)
{
int i;
bool band_rule_found = false;
const struct ieee80211_regdomain *regd;
- u32 max_bandwidth = 0;
+ bool bw_fits = false;
+
+ if (!desired_bw_khz)
+ desired_bw_khz = MHZ_TO_KHZ(20);
regd = custom_regd ? custom_regd : cfg80211_regdomain;
@@ -887,38 +885,54 @@ static int freq_reg_info_regd(struct wiphy *wiphy,
if (!band_rule_found)
band_rule_found = freq_in_rule_band(fr, center_freq);
- max_bandwidth = freq_max_bandwidth(fr, center_freq);
+ bw_fits = reg_does_bw_fit(fr,
+ center_freq,
+ desired_bw_khz);
- if (max_bandwidth && *bandwidth <= max_bandwidth) {
+ if (band_rule_found && bw_fits) {
*reg_rule = rr;
- *bandwidth = max_bandwidth;
- break;
+ return 0;
}
}
if (!band_rule_found)
return -ERANGE;
- return !max_bandwidth;
+ return -EINVAL;
}
EXPORT_SYMBOL(freq_reg_info);
-int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth,
- const struct ieee80211_reg_rule **reg_rule)
+int freq_reg_info(struct wiphy *wiphy,
+ u32 center_freq,
+ u32 desired_bw_khz,
+ const struct ieee80211_reg_rule **reg_rule)
{
assert_cfg80211_lock();
- return freq_reg_info_regd(wiphy, center_freq,
- bandwidth, reg_rule, NULL);
+ return freq_reg_info_regd(wiphy,
+ center_freq,
+ desired_bw_khz,
+ reg_rule,
+ NULL);
}
+/*
+ * Note that right now we assume the desired channel bandwidth
+ * is always 20 MHz for each individual channel (HT40 uses 20 MHz
+ * per channel, the primary and the extension channel). To support
+ * smaller custom bandwidths such as 5 MHz or 10 MHz we'll need a
+ * new ieee80211_channel.target_bw and re run the regulatory check
+ * on the wiphy with the target_bw specified. Then we can simply use
+ * that below for the desired_bw_khz below.
+ */
static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
unsigned int chan_idx)
{
int r;
- u32 flags;
- u32 max_bandwidth = 0;
+ u32 flags, bw_flags = 0;
+ u32 desired_bw_khz = MHZ_TO_KHZ(20);
const struct ieee80211_reg_rule *reg_rule = NULL;
const struct ieee80211_power_rule *power_rule = NULL;
+ const struct ieee80211_freq_range *freq_range = NULL;
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
struct wiphy *request_wiphy = NULL;
@@ -933,8 +947,10 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
flags = chan->orig_flags;
- r = freq_reg_info(wiphy, MHZ_TO_KHZ(chan->center_freq),
- &max_bandwidth, &reg_rule);
+ r = freq_reg_info(wiphy,
+ MHZ_TO_KHZ(chan->center_freq),
+ desired_bw_khz,
+ &reg_rule);
if (r) {
/*
@@ -977,6 +993,10 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
}
power_rule = &reg_rule->power_rule;
+ freq_range = &reg_rule->freq_range;
+
+ if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40))
+ bw_flags = IEEE80211_CHAN_NO_HT40;
if (last_request->initiator == NL80211_REGDOM_SET_BY_DRIVER &&
request_wiphy && request_wiphy == wiphy &&
@@ -987,19 +1007,19 @@ static void handle_channel(struct wiphy *wiphy, enum ieee80211_band band,
* settings
*/
chan->flags = chan->orig_flags =
- map_regdom_flags(reg_rule->flags);
+ map_regdom_flags(reg_rule->flags) | bw_flags;
chan->max_antenna_gain = chan->orig_mag =
(int) MBI_TO_DBI(power_rule->max_antenna_gain);
- chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth);
+ chan->max_bandwidth = KHZ_TO_MHZ(desired_bw_khz);
chan->max_power = chan->orig_mpwr =
(int) MBM_TO_DBM(power_rule->max_eirp);
return;
}
- chan->flags = flags | map_regdom_flags(reg_rule->flags);
+ chan->flags = flags | bw_flags | map_regdom_flags(reg_rule->flags);
chan->max_antenna_gain = min(chan->orig_mag,
(int) MBI_TO_DBI(power_rule->max_antenna_gain));
- chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth);
+ chan->max_bandwidth = KHZ_TO_MHZ(desired_bw_khz);
if (chan->orig_mpwr)
chan->max_power = min(chan->orig_mpwr,
(int) MBM_TO_DBM(power_rule->max_eirp));
@@ -1156,6 +1176,93 @@ static void reg_process_beacons(struct wiphy *wiphy)
wiphy_update_beacon_reg(wiphy);
}
+static bool is_ht40_not_allowed(struct ieee80211_channel *chan)
+{
+ if (!chan)
+ return true;
+ if (chan->flags & IEEE80211_CHAN_DISABLED)
+ return true;
+ /* This would happen when regulatory rules disallow HT40 completely */
+ if (IEEE80211_CHAN_NO_HT40 == (chan->flags & (IEEE80211_CHAN_NO_HT40)))
+ return true;
+ return false;
+}
+
+static void reg_process_ht_flags_channel(struct wiphy *wiphy,
+ enum ieee80211_band band,
+ unsigned int chan_idx)
+{
+ struct ieee80211_supported_band *sband;
+ struct ieee80211_channel *channel;
+ struct ieee80211_channel *channel_before = NULL, *channel_after = NULL;
+ unsigned int i;
+
+ assert_cfg80211_lock();
+
+ sband = wiphy->bands[band];
+ BUG_ON(chan_idx >= sband->n_channels);
+ channel = &sband->channels[chan_idx];
+
+ if (is_ht40_not_allowed(channel)) {
+ channel->flags |= IEEE80211_CHAN_NO_HT40;
+ return;
+ }
+
+ /*
+ * We need to ensure the extension channels exist to
+ * be able to use HT40- or HT40+, this finds them (or not)
+ */
+ for (i = 0; i < sband->n_channels; i++) {
+ struct ieee80211_channel *c = &sband->channels[i];
+ if (c->center_freq == (channel->center_freq - 20))
+ channel_before = c;
+ if (c->center_freq == (channel->center_freq + 20))
+ channel_after = c;
+ }
+
+ /*
+ * Please note that this assumes target bandwidth is 20 MHz,
+ * if that ever changes we also need to change the below logic
+ * to include that as well.
+ */
+ if (is_ht40_not_allowed(channel_before))
+ channel->flags |= IEEE80211_CHAN_NO_FAT_BELOW;
+ else
+ channel->flags &= ~IEEE80211_CHAN_NO_FAT_BELOW;
+
+ if (is_ht40_not_allowed(channel_after))
+ channel->flags |= IEEE80211_CHAN_NO_FAT_ABOVE;
+ else
+ channel->flags &= ~IEEE80211_CHAN_NO_FAT_ABOVE;
+}
+
+static void reg_process_ht_flags_band(struct wiphy *wiphy,
+ enum ieee80211_band band)
+{
+ unsigned int i;
+ struct ieee80211_supported_band *sband;
+
+ BUG_ON(!wiphy->bands[band]);
+ sband = wiphy->bands[band];
+
+ for (i = 0; i < sband->n_channels; i++)
+ reg_process_ht_flags_channel(wiphy, band, i);
+}
+
+static void reg_process_ht_flags(struct wiphy *wiphy)
+{
+ enum ieee80211_band band;
+
+ if (!wiphy)
+ return;
+
+ for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
+ if (wiphy->bands[band])
+ reg_process_ht_flags_band(wiphy, band);
+ }
+
+}
+
void wiphy_update_regulatory(struct wiphy *wiphy,
enum nl80211_reg_initiator initiator)
{
@@ -1169,6 +1276,7 @@ void wiphy_update_regulatory(struct wiphy *wiphy,
}
out:
reg_process_beacons(wiphy);
+ reg_process_ht_flags(wiphy);
if (wiphy->reg_notifier)
wiphy->reg_notifier(wiphy, last_request);
}
@@ -1179,9 +1287,11 @@ static void handle_channel_custom(struct wiphy *wiphy,
const struct ieee80211_regdomain *regd)
{
int r;
- u32 max_bandwidth = 0;
+ u32 desired_bw_khz = MHZ_TO_KHZ(20);
+ u32 bw_flags = 0;
const struct ieee80211_reg_rule *reg_rule = NULL;
const struct ieee80211_power_rule *power_rule = NULL;
+ const struct ieee80211_freq_range *freq_range = NULL;
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
@@ -1191,8 +1301,11 @@ static void handle_channel_custom(struct wiphy *wiphy,
BUG_ON(chan_idx >= sband->n_channels);
chan = &sband->channels[chan_idx];
- r = freq_reg_info_regd(wiphy, MHZ_TO_KHZ(chan->center_freq),
- &max_bandwidth, &reg_rule, regd);
+ r = freq_reg_info_regd(wiphy,
+ MHZ_TO_KHZ(chan->center_freq),
+ desired_bw_khz,
+ &reg_rule,
+ regd);
if (r) {
chan->flags = IEEE80211_CHAN_DISABLED;
@@ -1200,10 +1313,14 @@ static void handle_channel_custom(struct wiphy *wiphy,
}
power_rule = &reg_rule->power_rule;
+ freq_range = &reg_rule->freq_range;
+
+ if (freq_range->max_bandwidth_khz < MHZ_TO_KHZ(40))
+ bw_flags = IEEE80211_CHAN_NO_HT40;
- chan->flags |= map_regdom_flags(reg_rule->flags);
+ chan->flags |= map_regdom_flags(reg_rule->flags) | bw_flags;
chan->max_antenna_gain = (int) MBI_TO_DBI(power_rule->max_antenna_gain);
- chan->max_bandwidth = KHZ_TO_MHZ(max_bandwidth);
+ chan->max_bandwidth = KHZ_TO_MHZ(desired_bw_khz);
chan->max_power = (int) MBM_TO_DBM(power_rule->max_eirp);
}