aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/kernel-parameters.txt5
-rw-r--r--Documentation/scsi/scsi_mid_low_api.txt31
-rw-r--r--block/scsi_ioctl.c2
-rw-r--r--drivers/scsi/BusLogic.c12
-rw-r--r--drivers/scsi/Makefile2
-rw-r--r--drivers/scsi/NCR53c406a.c5
-rw-r--r--drivers/scsi/aha1740.c10
-rw-r--r--drivers/scsi/aic94xx/aic94xx_init.c9
-rw-r--r--drivers/scsi/aic94xx/aic94xx_scb.c120
-rw-r--r--drivers/scsi/fd_mcs.c2
-rw-r--r--drivers/scsi/hosts.c4
-rw-r--r--drivers/scsi/ips.c28
-rw-r--r--drivers/scsi/ips.h9
-rw-r--r--drivers/scsi/libsas/sas_init.c4
-rw-r--r--drivers/scsi/libsas/sas_scsi_host.c90
-rw-r--r--drivers/scsi/ncr53c8xx.c19
-rw-r--r--drivers/scsi/qla2xxx/qla_os.c12
-rw-r--r--drivers/scsi/qla2xxx/qla_sup.c8
-rw-r--r--drivers/scsi/scsi.c2
-rw-r--r--drivers/scsi/scsi_error.c33
-rw-r--r--drivers/scsi/scsi_lib.c313
-rw-r--r--drivers/scsi/scsi_priv.h3
-rw-r--r--drivers/scsi/scsi_scan.c203
-rw-r--r--drivers/scsi/scsi_wait_scan.c31
-rw-r--r--drivers/scsi/sd.c29
-rw-r--r--drivers/scsi/st.c16
-rw-r--r--drivers/scsi/t128.h39
-rw-r--r--include/scsi/libsas.h14
-rw-r--r--include/scsi/scsi_device.h30
-rw-r--r--include/scsi/scsi_host.h8
-rw-r--r--include/scsi/scsi_transport_sas.h2
31 files changed, 774 insertions, 321 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 67473849f20..9913f067664 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -1419,6 +1419,11 @@ and is between 256 and 4096 characters. It is defined in the file
scsi_logging= [SCSI]
+ scsi_mod.scan= [SCSI] sync (default) scans SCSI busses as they are
+ discovered. async scans them in kernel threads,
+ allowing boot to proceed. none ignores them, expecting
+ user space to do the scan.
+
selinux [SELINUX] Disable or enable SELinux at boot time.
Format: { "0" | "1" }
See security/selinux/Kconfig help text.
diff --git a/Documentation/scsi/scsi_mid_low_api.txt b/Documentation/scsi/scsi_mid_low_api.txt
index 75a535a975c..6f70f2b9327 100644
--- a/Documentation/scsi/scsi_mid_low_api.txt
+++ b/Documentation/scsi/scsi_mid_low_api.txt
@@ -375,7 +375,6 @@ Summary:
scsi_add_device - creates new scsi device (lu) instance
scsi_add_host - perform sysfs registration and set up transport class
scsi_adjust_queue_depth - change the queue depth on a SCSI device
- scsi_assign_lock - replace default host_lock with given lock
scsi_bios_ptable - return copy of block device's partition table
scsi_block_requests - prevent further commands being queued to given host
scsi_deactivate_tcq - turn off tag command queueing
@@ -489,20 +488,6 @@ void scsi_adjust_queue_depth(struct scsi_device * sdev, int tagged,
/**
- * scsi_assign_lock - replace default host_lock with given lock
- * @shost: a pointer to a scsi host instance
- * @lock: pointer to lock to replace host_lock for this host
- *
- * Returns nothing
- *
- * Might block: no
- *
- * Defined in: include/scsi/scsi_host.h .
- **/
-void scsi_assign_lock(struct Scsi_Host *shost, spinlock_t *lock)
-
-
-/**
* scsi_bios_ptable - return copy of block device's partition table
* @dev: pointer to block device
*
@@ -1366,17 +1351,11 @@ Locks
Each struct Scsi_Host instance has a spin_lock called struct
Scsi_Host::default_lock which is initialized in scsi_host_alloc() [found in
hosts.c]. Within the same function the struct Scsi_Host::host_lock pointer
-is initialized to point at default_lock with the scsi_assign_lock() function.
-Thereafter lock and unlock operations performed by the mid level use the
-struct Scsi_Host::host_lock pointer.
-
-LLDs can override the use of struct Scsi_Host::default_lock by
-using scsi_assign_lock(). The earliest opportunity to do this would
-be in the detect() function after it has invoked scsi_register(). It
-could be replaced by a coarser grain lock (e.g. per driver) or a
-lock of equal granularity (i.e. per host). Using finer grain locks
-(e.g. per SCSI device) may be possible by juggling locks in
-queuecommand().
+is initialized to point at default_lock. Thereafter lock and unlock
+operations performed by the mid level use the struct Scsi_Host::host_lock
+pointer. Previously drivers could override the host_lock pointer but
+this is not allowed anymore.
+
Autosense
=========
diff --git a/block/scsi_ioctl.c b/block/scsi_ioctl.c
index e55a7562143..dcd9c71fe8d 100644
--- a/block/scsi_ioctl.c
+++ b/block/scsi_ioctl.c
@@ -303,7 +303,7 @@ static int sg_io(struct file *file, request_queue_t *q,
if (rq->bio)
blk_queue_bounce(q, &rq->bio);
- rq->timeout = (hdr->timeout * HZ) / 1000;
+ rq->timeout = jiffies_to_msecs(hdr->timeout);
if (!rq->timeout)
rq->timeout = q->sg_timeout;
if (!rq->timeout)
diff --git a/drivers/scsi/BusLogic.c b/drivers/scsi/BusLogic.c
index cdd03372478..3075204915c 100644
--- a/drivers/scsi/BusLogic.c
+++ b/drivers/scsi/BusLogic.c
@@ -2186,21 +2186,21 @@ static int __init BusLogic_init(void)
if (BusLogic_ProbeOptions.NoProbe)
return -ENODEV;
- BusLogic_ProbeInfoList = (struct BusLogic_ProbeInfo *)
- kmalloc(BusLogic_MaxHostAdapters * sizeof(struct BusLogic_ProbeInfo), GFP_ATOMIC);
+ BusLogic_ProbeInfoList =
+ kzalloc(BusLogic_MaxHostAdapters * sizeof(struct BusLogic_ProbeInfo), GFP_KERNEL);
if (BusLogic_ProbeInfoList == NULL) {
BusLogic_Error("BusLogic: Unable to allocate Probe Info List\n", NULL);
return -ENOMEM;
}
- memset(BusLogic_ProbeInfoList, 0, BusLogic_MaxHostAdapters * sizeof(struct BusLogic_ProbeInfo));
- PrototypeHostAdapter = (struct BusLogic_HostAdapter *)
- kmalloc(sizeof(struct BusLogic_HostAdapter), GFP_ATOMIC);
+
+ PrototypeHostAdapter =
+ kzalloc(sizeof(struct BusLogic_HostAdapter), GFP_KERNEL);
if (PrototypeHostAdapter == NULL) {
kfree(BusLogic_ProbeInfoList);
BusLogic_Error("BusLogic: Unable to allocate Prototype " "Host Adapter\n", NULL);
return -ENOMEM;
}
- memset(PrototypeHostAdapter, 0, sizeof(struct BusLogic_HostAdapter));
+
#ifdef MODULE
if (BusLogic != NULL)
BusLogic_Setup(BusLogic);
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index bcca39c3bcb..a0a77fde370 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -141,6 +141,8 @@ obj-$(CONFIG_CHR_DEV_SCH) += ch.o
# This goes last, so that "real" scsi devices probe earlier
obj-$(CONFIG_SCSI_DEBUG) += scsi_debug.o
+obj-$(CONFIG_SCSI) += scsi_wait_scan.o
+
scsi_mod-y += scsi.o hosts.o scsi_ioctl.o constants.o \
scsicam.o scsi_error.o scsi_lib.o \
scsi_scan.o scsi_sysfs.o \
diff --git a/drivers/scsi/NCR53c406a.c b/drivers/scsi/NCR53c406a.c
index d4613815f68..8578555d58f 100644
--- a/drivers/scsi/NCR53c406a.c
+++ b/drivers/scsi/NCR53c406a.c
@@ -220,9 +220,11 @@ static void *addresses[] = {
static unsigned short ports[] = { 0x230, 0x330, 0x280, 0x290, 0x330, 0x340, 0x300, 0x310, 0x348, 0x350 };
#define PORT_COUNT ARRAY_SIZE(ports)
+#ifndef MODULE
/* possible interrupt channels */
static unsigned short intrs[] = { 10, 11, 12, 15 };
#define INTR_COUNT ARRAY_SIZE(intrs)
+#endif /* !MODULE */
/* signatures for NCR 53c406a based controllers */
#if USE_BIOS
@@ -605,6 +607,7 @@ static int NCR53c406a_release(struct Scsi_Host *shost)
return 0;
}
+#ifndef MODULE
/* called from init/main.c */
static int __init NCR53c406a_setup(char *str)
{
@@ -661,6 +664,8 @@ static int __init NCR53c406a_setup(char *str)
__setup("ncr53c406a=", NCR53c406a_setup);
+#endif /* !MODULE */
+
static const char *NCR53c406a_info(struct Scsi_Host *SChost)
{
DEB(printk("NCR53c406a_info called\n"));
diff --git a/drivers/scsi/aha1740.c b/drivers/scsi/aha1740.c
index c3c38a7e8d3..d7af9c63a04 100644
--- a/drivers/scsi/aha1740.c
+++ b/drivers/scsi/aha1740.c
@@ -586,7 +586,7 @@ static struct scsi_host_template aha1740_template = {
static int aha1740_probe (struct device *dev)
{
- int slotbase;
+ int slotbase, rc;
unsigned int irq_level, irq_type, translation;
struct Scsi_Host *shpnt;
struct aha1740_hostdata *host;
@@ -641,10 +641,16 @@ static int aha1740_probe (struct device *dev)
}
eisa_set_drvdata (edev, shpnt);
- scsi_add_host (shpnt, dev); /* XXX handle failure */
+
+ rc = scsi_add_host (shpnt, dev);
+ if (rc)
+ goto err_irq;
+
scsi_scan_host (shpnt);
return 0;
+ err_irq:
+ free_irq(irq_level, shpnt);
err_unmap:
dma_unmap_single (&edev->dev, host->ecb_dma_addr,
sizeof (host->ecb), DMA_BIDIRECTIONAL);
diff --git a/drivers/scsi/aic94xx/aic94xx_init.c b/drivers/scsi/aic94xx/aic94xx_init.c
index 57c5ba4043f..42302ef05ee 100644
--- a/drivers/scsi/aic94xx/aic94xx_init.c
+++ b/drivers/scsi/aic94xx/aic94xx_init.c
@@ -724,6 +724,15 @@ static void asd_free_queues(struct asd_ha_struct *asd_ha)
list_for_each_safe(pos, n, &pending) {
struct asd_ascb *ascb = list_entry(pos, struct asd_ascb, list);
+ /*
+ * Delete unexpired ascb timers. This may happen if we issue
+ * a CONTROL PHY scb to an adapter and rmmod before the scb
+ * times out. Apparently we don't wait for the CONTROL PHY
+ * to complete, so it doesn't matter if we kill the timer.
+ */
+ del_timer_sync(&ascb->timer);
+ WARN_ON(ascb->scb->header.opcode != CONTROL_PHY);
+
list_del_init(pos);
ASD_DPRINTK("freeing from pending\n");
asd_ascb_free(ascb);
diff --git a/drivers/scsi/aic94xx/aic94xx_scb.c b/drivers/scsi/aic94xx/aic94xx_scb.c
index b15caf1c8fa..14d5d8c2ee1 100644
--- a/drivers/scsi/aic94xx/aic94xx_scb.c
+++ b/drivers/scsi/aic94xx/aic94xx_scb.c
@@ -25,6 +25,7 @@
*/
#include <linux/pci.h>
+#include <scsi/scsi_host.h>
#include "aic94xx.h"
#include "aic94xx_reg.h"
@@ -412,6 +413,39 @@ void asd_invalidate_edb(struct asd_ascb *ascb, int edb_id)
}
}
+/* hard reset a phy later */
+static void do_phy_reset_later(void *data)
+{
+ struct sas_phy *sas_phy = data;
+ int error;
+
+ ASD_DPRINTK("%s: About to hard reset phy %d\n", __FUNCTION__,
+ sas_phy->identify.phy_identifier);
+ /* Reset device port */
+ error = sas_phy_reset(sas_phy, 1);
+ if (error)
+ ASD_DPRINTK("%s: Hard reset of phy %d failed (%d).\n",
+ __FUNCTION__, sas_phy->identify.phy_identifier, error);
+}
+
+static void phy_reset_later(struct sas_phy *sas_phy, struct Scsi_Host *shost)
+{
+ INIT_WORK(&sas_phy->reset_work, do_phy_reset_later, sas_phy);
+ queue_work(shost->work_q, &sas_phy->reset_work);
+}
+
+/* start up the ABORT TASK tmf... */
+static void task_kill_later(struct asd_ascb *ascb)
+{
+ struct asd_ha_struct *asd_ha = ascb->ha;
+ struct sas_ha_struct *sas_ha = &asd_ha->sas_ha;
+ struct Scsi_Host *shost = sas_ha->core.shost;
+ struct sas_task *task = ascb->uldd_task;
+
+ INIT_WORK(&task->abort_work, (void (*)(void *))sas_task_abort, task);
+ queue_work(shost->work_q, &task->abort_work);
+}
+
static void escb_tasklet_complete(struct asd_ascb *ascb,
struct done_list_struct *dl)
{
@@ -439,6 +473,74 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
ascb->scb->header.opcode);
}
+ /* Catch these before we mask off the sb_opcode bits */
+ switch (sb_opcode) {
+ case REQ_TASK_ABORT: {
+ struct asd_ascb *a, *b;
+ u16 tc_abort;
+
+ tc_abort = *((u16*)(&dl->status_block[1]));
+ tc_abort = le16_to_cpu(tc_abort);
+
+ ASD_DPRINTK("%s: REQ_TASK_ABORT, reason=0x%X\n",
+ __FUNCTION__, dl->status_block[3]);
+
+ /* Find the pending task and abort it. */
+ list_for_each_entry_safe(a, b, &asd_ha->seq.pend_q, list)
+ if (a->tc_index == tc_abort) {
+ task_kill_later(a);
+ break;
+ }
+ goto out;
+ }
+ case REQ_DEVICE_RESET: {
+ struct Scsi_Host *shost = sas_ha->core.shost;
+ struct sas_phy *dev_phy;
+ struct asd_ascb *a;
+ u16 conn_handle;
+
+ conn_handle = *((u16*)(&dl->status_block[1]));
+ conn_handle = le16_to_cpu(conn_handle);
+
+ ASD_DPRINTK("%s: REQ_DEVICE_RESET, reason=0x%X\n", __FUNCTION__,
+ dl->status_block[3]);
+
+ /* Kill all pending tasks and reset the device */
+ dev_phy = NULL;
+ list_for_each_entry(a, &asd_ha->seq.pend_q, list) {
+ struct sas_task *task;
+ struct domain_device *dev;
+ u16 x;
+
+ task = a->uldd_task;
+ if (!task)
+ continue;
+ dev = task->dev;
+
+ x = (unsigned long)dev->lldd_dev;
+ if (x == conn_handle) {
+ dev_phy = dev->port->phy;
+ task_kill_later(a);
+ }
+ }
+
+ /* Reset device port */
+ if (!dev_phy) {
+ ASD_DPRINTK("%s: No pending commands; can't reset.\n",
+ __FUNCTION__);
+ goto out;
+ }
+ phy_reset_later(dev_phy, shost);
+ goto out;
+ }
+ case SIGNAL_NCQ_ERROR:
+ ASD_DPRINTK("%s: SIGNAL_NCQ_ERROR\n", __FUNCTION__);
+ goto out;
+ case CLEAR_NCQ_ERROR:
+ ASD_DPRINTK("%s: CLEAR_NCQ_ERROR\n", __FUNCTION__);
+ goto out;
+ }
+
sb_opcode &= ~DL_PHY_MASK;
switch (sb_opcode) {
@@ -469,22 +571,6 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
asd_deform_port(asd_ha, phy);
sas_ha->notify_port_event(sas_phy, PORTE_TIMER_EVENT);
break;
- case REQ_TASK_ABORT:
- ASD_DPRINTK("%s: phy%d: REQ_TASK_ABORT\n", __FUNCTION__,
- phy_id);
- break;
- case REQ_DEVICE_RESET:
- ASD_DPRINTK("%s: phy%d: REQ_DEVICE_RESET\n", __FUNCTION__,
- phy_id);
- break;
- case SIGNAL_NCQ_ERROR:
- ASD_DPRINTK("%s: phy%d: SIGNAL_NCQ_ERROR\n", __FUNCTION__,
- phy_id);
- break;
- case CLEAR_NCQ_ERROR:
- ASD_DPRINTK("%s: phy%d: CLEAR_NCQ_ERROR\n", __FUNCTION__,
- phy_id);
- break;
default:
ASD_DPRINTK("%s: phy%d: unknown event:0x%x\n", __FUNCTION__,
phy_id, sb_opcode);
@@ -504,7 +590,7 @@ static void escb_tasklet_complete(struct asd_ascb *ascb,
break;
}
-
+out:
asd_invalidate_edb(ascb, edb);
}
diff --git a/drivers/scsi/fd_mcs.c b/drivers/scsi/fd_mcs.c
index ef8285c326e..668569e8856 100644
--- a/drivers/scsi/fd_mcs.c
+++ b/drivers/scsi/fd_mcs.c
@@ -294,6 +294,7 @@ static struct Scsi_Host *hosts[FD_MAX_HOSTS + 1] = { NULL };
static int user_fifo_count = 0;
static int user_fifo_size = 0;
+#ifndef MODULE
static int __init fd_mcs_setup(char *str)
{
static int done_setup = 0;
@@ -311,6 +312,7 @@ static int __init fd_mcs_setup(char *str)
}
__setup("fd_mcs=", fd_mcs_setup);
+#endif /* !MODULE */
static void print_banner(struct Scsi_Host *shpnt)
{
diff --git a/drivers/scsi/hosts.c b/drivers/scsi/hosts.c
index 68ef1636678..2ffdc9e0532 100644
--- a/drivers/scsi/hosts.c
+++ b/drivers/scsi/hosts.c
@@ -301,8 +301,8 @@ struct Scsi_Host *scsi_host_alloc(struct scsi_host_template *sht, int privsize)
if (!shost)
return NULL;
- spin_lock_init(&shost->default_lock);
- scsi_assign_lock(shost, &shost->default_lock);
+ shost->host_lock = &shost->default_lock;
+ spin_lock_init(shost->host_lock);
shost->shost_state = SHOST_CREATED;
INIT_LIST_HEAD(&shost->__devices);
INIT_LIST_HEAD(&shost->__targets);
diff --git a/drivers/scsi/ips.c b/drivers/scsi/ips.c
index f06a06ae609..8b704f73055 100644
--- a/drivers/scsi/ips.c
+++ b/drivers/scsi/ips.c
@@ -5001,7 +5001,7 @@ ips_init_copperhead(ips_ha_t * ha)
break;
/* Delay for 1 Second */
- msleep(IPS_ONE_SEC);
+ MDELAY(IPS_ONE_SEC);
}
if (j >= 45)
@@ -5027,7 +5027,7 @@ ips_init_copperhead(ips_ha_t * ha)
break;
/* Delay for 1 Second */
- msleep(IPS_ONE_SEC);
+ MDELAY(IPS_ONE_SEC);
}
if (j >= 240)
@@ -5045,7 +5045,7 @@ ips_init_copperhead(ips_ha_t * ha)
break;
/* Delay for 1 Second */
- msleep(IPS_ONE_SEC);
+ MDELAY(IPS_ONE_SEC);
}
if (i >= 240)
@@ -5095,7 +5095,7 @@ ips_init_copperhead_memio(ips_ha_t * ha)
break;
/* Delay for 1 Second */
- msleep(IPS_ONE_SEC);
+ MDELAY(IPS_ONE_SEC);
}
if (j >= 45)
@@ -5121,7 +5121,7 @@ ips_init_copperhead_memio(ips_ha_t * ha)
break;
/* Delay for 1 Second */
- msleep(IPS_ONE_SEC);
+ MDELAY(IPS_ONE_SEC);
}
if (j >= 240)
@@ -5139,7 +5139,7 @@ ips_init_copperhead_memio(ips_ha_t * ha)
break;
/* Delay for 1 Second */
- msleep(IPS_ONE_SEC);
+ MDELAY(IPS_ONE_SEC);
}
if (i >= 240)
@@ -5191,7 +5191,7 @@ ips_init_morpheus(ips_ha_t * ha)
break;
/* Delay for 1 Second */
- msleep(IPS_ONE_SEC);
+ MDELAY(IPS_ONE_SEC);
}
if (i >= 45) {
@@ -5217,7 +5217,7 @@ ips_init_morpheus(ips_ha_t * ha)
if (Post != 0x4F00)
break;
/* Delay for 1 Second */
- msleep(IPS_ONE_SEC);
+ MDELAY(IPS_ONE_SEC);
}
if (i >= 120) {
@@ -5247,7 +5247,7 @@ ips_init_morpheus(ips_ha_t * ha)
break;
/* Delay for 1 Second */
- msleep(IPS_ONE_SEC);
+ MDELAY(IPS_ONE_SEC);
}
if (i >= 240) {
@@ -5307,12 +5307,12 @@ ips_reset_copperhead(ips_ha_t * ha)
outb(IPS_BIT_RST, ha->io_addr + IPS_REG_SCPR);
/* Delay for 1 Second */
- msleep(IPS_ONE_SEC);
+ MDELAY(IPS_ONE_SEC);
outb(0, ha->io_addr + IPS_REG_SCPR);
/* Delay for 1 Second */
- msleep(IPS_ONE_SEC);
+ MDELAY(IPS_ONE_SEC);
if ((*ha->func.init) (ha))
break;
@@ -5352,12 +5352,12 @@ ips_reset_copperhead_memio(ips_ha_t * ha)
writeb(IPS_BIT_RST, ha->mem_ptr + IPS_REG_SCPR);
/* Delay for 1 Second */
- msleep(IPS_ONE_SEC);
+ MDELAY(IPS_ONE_SEC);
writeb(0, ha->mem_ptr + IPS_REG_SCPR);
/* Delay for 1 Second */
- msleep(IPS_ONE_SEC);
+ MDELAY(IPS_ONE_SEC);
if ((*ha->func.init) (ha))
break;
@@ -5398,7 +5398,7 @@ ips_reset_morpheus(ips_ha_t * ha)
writel(0x80000000, ha->mem_ptr + IPS_REG_I960_IDR);
/* Delay for 5 Seconds */
- msleep(5 * IPS_ONE_SEC);
+ MDELAY(5 * IPS_ONE_SEC);
/* Do a PCI config read to wait for adapter */
pci_read_config_byte(ha->pcidev, 4, &junk);
diff --git a/drivers/scsi/ips.h b/drivers/scsi/ips.h
index 34680f3dd45..b726dcc424b 100644
--- a/drivers/scsi/ips.h
+++ b/drivers/scsi/ips.h
@@ -51,6 +51,7 @@
#define _IPS_H_
#include <linux/version.h>
+#include <linux/nmi.h>
#include <asm/uaccess.h>
#include <asm/io.h>
@@ -116,9 +117,11 @@
dev_printk(level , &((pcidev)->dev) , format , ## arg)
#endif
- #ifndef MDELAY
- #define MDELAY mdelay
- #endif
+ #define MDELAY(n) \
+ do { \
+ mdelay(n); \
+ touch_nmi_watchdog(); \
+ } while (0)
#ifndef min
#define min(x,y) ((x) < (y) ? x : y)
diff --git a/drivers/scsi/libsas/sas_init.c b/drivers/scsi/libsas/sas_init.c
index c836a237fb7..0fb347b4b1a 100644
--- a/drivers/scsi/libsas/sas_init.c
+++ b/drivers/scsi/libsas/sas_init.c
@@ -112,6 +112,8 @@ int sas_register_ha(struct sas_ha_struct *sas_ha)
}
}
+ INIT_LIST_HEAD(&sas_ha->eh_done_q);
+
return 0;
Undo_ports:
@@ -142,7 +144,7 @@ static int sas_get_linkerrors(struct sas_phy *phy)
return sas_smp_get_phy_events(phy);
}
-static int sas_phy_reset(struct sas_phy *phy, int hard_reset)
+int sas_phy_reset(struct sas_phy *phy, int hard_reset)
{
int ret;
enum phy_func reset_type;
diff --git a/drivers/scsi/libsas/sas_scsi_host.c b/drivers/scsi/libsas/sas_scsi_host.c
index e46e79355b7..e064aac06b9 100644
--- a/drivers/scsi/libsas/sas_scsi_host.c
+++ b/drivers/scsi/libsas/sas_scsi_host.c
@@ -29,9 +29,11 @@
#include <scsi/scsi_device.h>
#include <scsi/scsi_tcq.h>
#include <scsi/scsi.h>
+#include <scsi/scsi_eh.h>
#include <scsi/scsi_transport.h>
#include <scsi/scsi_transport_sas.h>
#include "../scsi_sas_internal.h"
+#include "../scsi_transport_api.h"
#include <linux/err.h>
#include <linux/blkdev.h>
@@ -46,6 +48,7 @@ static void sas_scsi_task_done(struct sas_task *task)
{
struct task_status_struct *ts = &task->task_status;
struct scsi_cmnd *sc = task->uldd_task;
+ struct sas_ha_struct *sas_ha = SHOST_TO_SAS_HA(sc->device->host);
unsigned ts_flags = task->task_state_flags;
int hs = 0, stat = 0;
@@ -116,7 +119,7 @@ static void sas_scsi_task_done(struct sas_task *task)
sas_free_task(task);
/* This is very ugly but this is how SCSI Core works. */
if (ts_flags & SAS_TASK_STATE_ABORTED)
- scsi_finish_command(sc);
+ scsi_eh_finish_cmd(sc, &sas_ha->eh_done_q);
else
sc->scsi_done(sc);
}
@@ -307,6 +310,15 @@ static enum task_disposition sas_scsi_find_task(struct sas_task *task)
spin_unlock_irqrestore(&core->task_queue_lock, flags);
}
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_INITIATOR_ABORTED) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ SAS_DPRINTK("%s: task 0x%p already aborted\n",
+ __FUNCTION__, task);
+ return TASK_IS_ABORTED;
+ }
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
for (i = 0; i < 5; i++) {
SAS_DPRINTK("%s: aborting task 0x%p\n", __FUNCTION__, task);
res = si->dft->lldd_abort_task(task);
@@ -409,13 +421,16 @@ Again:
SAS_DPRINTK("going over list...\n");
list_for_each_entry_safe(cmd, n, &error_q, eh_entry) {
struct sas_task *task = TO_SAS_TASK(cmd);
+ list_del_init(&cmd->eh_entry);
+ if (!task) {
+ SAS_DPRINTK("%s: taskless cmd?!\n", __FUNCTION__);
+ continue;
+ }
SAS_DPRINTK("trying to find task 0x%p\n", task);
- list_del_init(&cmd->eh_entry);
res = sas_scsi_find_task(task);
cmd->eh_eflags = 0;
- shost->host_failed--;
switch (res) {
case TASK_IS_DONE:
@@ -491,6 +506,7 @@ Again:
}
}
out:
+ scsi_eh_flush_done_q(&ha->eh_done_q);
SAS_DPRINTK("--- Exit %s\n", __FUNCTION__);
return;
clear_q:
@@ -508,12 +524,18 @@ enum scsi_eh_timer_return sas_scsi_timed_out(struct scsi_cmnd *cmd)
unsigned long flags;
if (!task) {
- SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_HANDLED\n",
+ SAS_DPRINTK("command 0x%p, task 0x%p, gone: EH_HANDLED\n",
cmd, task);
return EH_HANDLED;
}
spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_INITIATOR_ABORTED) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ SAS_DPRINTK("command 0x%p, task 0x%p, aborted by initiator: "
+ "EH_NOT_HANDLED\n", cmd, task);
+ return EH_NOT_HANDLED;
+ }
if (task->task_state_flags & SAS_TASK_STATE_DONE) {
spin_unlock_irqrestore(&task->task_state_lock, flags);
SAS_DPRINTK("command 0x%p, task 0x%p, timed out: EH_HANDLED\n",
@@ -777,6 +799,64 @@ void sas_shutdown_queue(struct sas_ha_struct *sas_ha)
spin_unlock_irqrestore(&core->task_queue_lock, flags);
}
+static int do_sas_task_abort(struct sas_task *task)
+{
+ struct scsi_cmnd *sc = task->uldd_task;
+ struct sas_internal *si =
+ to_sas_internal(task->dev->port->ha->core.shost->transportt);
+ unsigned long flags;
+ int res;
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ if (task->task_state_flags & SAS_TASK_STATE_ABORTED) {
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+ SAS_DPRINTK("%s: Task %p already aborted.\n", __FUNCTION__,
+ task);
+ return 0;
+ }
+
+ task->task_state_flags |= SAS_TASK_INITIATOR_ABORTED;
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
+ task->task_state_flags |= SAS_TASK_STATE_ABORTED;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ if (!si->dft->lldd_abort_task)
+ return -ENODEV;
+
+ res = si->dft->lldd_abort_task(task);
+ if ((task->task_state_flags & SAS_TASK_STATE_DONE) ||
+ (res == TMF_RESP_FUNC_COMPLETE))
+ {
+ /* SMP commands don't have scsi_cmds(?) */
+ if (!sc) {
+ task->task_done(task);
+ return 0;
+ }
+ scsi_req_abort_cmd(sc);
+ scsi_schedule_eh(sc->device->host);
+ return 0;
+ }
+
+ spin_lock_irqsave(&task->task_state_lock, flags);
+ task->task_state_flags &= ~SAS_TASK_INITIATOR_ABORTED;
+ if (!(task->task_state_flags & SAS_TASK_STATE_DONE))
+ task->task_state_flags &= ~SAS_TASK_STATE_ABORTED;
+ spin_unlock_irqrestore(&task->task_state_lock, flags);
+
+ return -EAGAIN;
+}
+
+void sas_task_abort(struct sas_task *task)
+{
+ int i;
+
+ for (i = 0; i < 5; i++)
+ if (!do_sas_task_abort(task))
+ return;
+
+ SAS_DPRINTK("%s: Could not kill task!\n", __FUNCTION__);
+}
+
EXPORT_SYMBOL_GPL(sas_queuecommand);
EXPORT_SYMBOL_GPL(sas_target_alloc);
EXPORT_SYMBOL_GPL(sas_slave_configure);
@@ -784,3 +864,5 @@ EXPORT_SYMBOL_GPL(sas_slave_destroy);
EXPORT_SYMBOL_GPL(sas_change_queue_depth);
EXPORT_SYMBOL_GPL(sas_change_queue_type);
EXPORT_SYMBOL_GPL(sas_bios_param);
+EXPORT_SYMBOL_GPL(sas_task_abort);
+EXPORT_SYMBOL_GPL(sas_phy_reset);
diff --git a/drivers/scsi/ncr53c8xx.c b/drivers/scsi/ncr53c8xx.c
index 6cc2bc2f62b..5a88fa0b2fc 100644
--- a/drivers/scsi/ncr53c8xx.c
+++ b/drivers/scsi/ncr53c8xx.c
@@ -589,10 +589,12 @@ static int __map_scsi_sg_data(struct device *dev, struct scsi_cmnd *cmd)
static struct ncr_driver_setup
driver_setup = SCSI_NCR_DRIVER_SETUP;
+#ifndef MODULE
#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
static struct ncr_driver_setup
driver_safe_setup __initdata = SCSI_NCR_DRIVER_SAFE_SETUP;
#endif
+#endif /* !MODULE */
#define initverbose (driver_setup.verbose)
#define bootverbose (np->verbose)
@@ -641,6 +643,13 @@ static struct ncr_driver_setup
#define OPT_IARB 26
#endif
+#ifdef MODULE
+#define ARG_SEP ' '
+#else
+#define ARG_SEP ','
+#endif
+
+#ifndef MODULE
static char setup_token[] __initdata =
"tags:" "mpar:"
"spar:" "disc:"
@@ -660,12 +669,6 @@ static char setup_token[] __initdata =
#endif
; /* DONNOT REMOVE THIS ';' */
-#ifdef MODULE
-#define ARG_SEP ' '
-#else
-#define ARG_SEP ','
-#endif
-
static int __init get_setup_token(char *p)
{
char *cur = setup_token;
@@ -682,7 +685,6 @@ static int __init get_setup_token(char *p)
return 0;
}
-
static int __init sym53c8xx__setup(char *str)
{
#ifdef SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT
@@ -804,6 +806,7 @@ static int __init sym53c8xx__setup(char *str)
#endif /* SCSI_NCR_BOOT_COMMAND_LINE_SUPPORT */
return 1;
}
+#endif /* !MODULE */
/*===================================================================
**
@@ -8321,12 +8324,12 @@ char *ncr53c8xx; /* command line passed by insmod */
module_param(ncr53c8xx, charp, 0);
#endif
+#ifndef MODULE
static int __init ncr53c8xx_setup(char *str)
{
return sym53c8xx__setup(str);
}
-#ifndef MODULE
__setup("ncr53c8xx=", ncr53c8xx_setup);
#endif
diff --git a/drivers/scsi/qla2xxx/qla_os.c b/drivers/scsi/qla2xxx/qla_os.c
index 208607be78c..3eb4cd2cbc7 100644
--- a/drivers/scsi/qla2xxx/qla_os.c
+++ b/drivers/scsi/qla2xxx/qla_os.c
@@ -287,7 +287,7 @@ qla24xx_pci_info_str(struct scsi_qla_host *ha, char *str)
return str;
}
-char *
+static char *
qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str)
{
char un_str[10];
@@ -325,7 +325,7 @@ qla2x00_fw_version_str(struct scsi_qla_host *ha, char *str)
return (str);
}
-char *
+static char *
qla24xx_fw_version_str(struct scsi_qla_host *ha, char *str)
{
sprintf(str, "%d.%02d.%02d ", ha->fw_major_version,
@@ -634,7 +634,7 @@ qla2x00_block_error_handler(struct scsi_cmnd *cmnd)
* Note:
* Only return FAILED if command not returned by firmware.
**************************************************************************/
-int
+static int
qla2xxx_eh_abort(struct scsi_cmnd *cmd)
{
scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
@@ -771,7 +771,7 @@ qla2x00_eh_wait_for_pending_target_commands(scsi_qla_host_t *ha, unsigned int t)
* SUCCESS/FAILURE (defined as macro in scsi.h).
*
**************************************************************************/
-int
+static int
qla2xxx_eh_device_reset(struct scsi_cmnd *cmd)
{
scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
@@ -902,7 +902,7 @@ qla2x00_eh_wait_for_pending_commands(scsi_qla_host_t *ha)
* SUCCESS/FAILURE (defined as macro in scsi.h).
*
**************************************************************************/
-int
+static int
qla2xxx_eh_bus_reset(struct scsi_cmnd *cmd)
{
scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
@@ -963,7 +963,7 @@ eh_bus_reset_done:
*
* Note:
**************************************************************************/
-int
+static int
qla2xxx_eh_host_reset(struct scsi_cmnd *cmd)
{
scsi_qla_host_t *ha = to_qla_host(cmd->device->host);
diff --git a/drivers/scsi/qla2xxx/qla_sup.c b/drivers/scsi/qla2xxx/qla_sup.c
index c71dbd5bd54..15390ad8745 100644
--- a/drivers/scsi/qla2xxx/qla_sup.c
+++ b/drivers/scsi/qla2xxx/qla_sup.c
@@ -449,7 +449,7 @@ nvram_data_to_access_addr(uint32_t naddr)
return FARX_ACCESS_NVRAM_DATA | naddr;
}
-uint32_t
+static uint32_t
qla24xx_read_flash_dword(scsi_qla_host_t *ha, uint32_t addr)
{
int rval;
@@ -490,7 +490,7 @@ qla24xx_read_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
return dwptr;
}
-int
+static int
qla24xx_write_flash_dword(scsi_qla_host_t *ha, uint32_t addr, uint32_t data)
{
int rval;
@@ -512,7 +512,7 @@ qla24xx_write_flash_dword(scsi_qla_host_t *ha, uint32_t addr, uint32_t data)
return rval;
}
-void
+static void
qla24xx_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
uint8_t *flash_id)
{
@@ -537,7 +537,7 @@ qla24xx_get_flash_manufacturer(scsi_qla_host_t *ha, uint8_t *man_id,
}
}
-int
+static int
qla24xx_write_flash_data(scsi_qla_host_t *ha, uint32_t *dwptr, uint32_t faddr,
uint32_t dwords)
{
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index c59f31533ab..780d6dc92b4 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -871,9 +871,9 @@ EXPORT_SYMBOL(scsi_device_get);
*/
void scsi_device_put(struct scsi_device *sdev)
{
+#ifdef CONFIG_MODULE_UNLOAD
struct module *module = sdev->host->hostt->module;
-#ifdef CONFIG_MODULE_UNLOAD
/* The module refcount will be zero if scsi_device_get()
* was called from a module removal routine */
if (module && module_refcount(module) != 0)
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index aff1b0cfd4b..2ecb6ff4244 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -453,9 +453,18 @@ static void scsi_eh_done(struct scsi_cmnd *scmd)
}
/**
- * scsi_send_eh_cmnd - send a cmd to a device as part of error recovery.
- * @scmd: SCSI Cmd to send.
- * @timeout: Timeout for cmd.
+ * scsi_send_eh_cmnd - submit a scsi command as part of error recory
+ * @scmd: SCSI command structure to hijack
+ * @cmnd: CDB to send
+ * @cmnd_size: size in bytes of @cmnd
+ * @timeout: timeout for this request
+ * @copy_sense: request sense data if set to 1
+ *
+ * This function is used to send a scsi command down to a target device
+ * as part of the error recovery process. If @copy_sense is 0 the command
+ * sent must be one that does not transfer any data. If @copy_sense is 1
+ * the command must be REQUEST_SENSE and this functions copies out the
+ * sense buffer it got into @scmd->sense_buffer.
*
* Return value:
* SUCCESS or FAILED or NEEDS_RETRY
@@ -469,6 +478,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
DECLARE_COMPLETION_ONSTACK(done);
unsigned long timeleft;
unsigned long flags;
+ struct scatterlist sgl;
unsigned char old_cmnd[MAX_COMMAND_SIZE];
enum dma_data_direction old_data_direction;
unsigned short old_use_sg;
@@ -500,19 +510,24 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
if (shost->hostt->unchecked_isa_dma)
gfp_mask |= __GFP_DMA;
- scmd->sc_data_direction = DMA_FROM_DEVICE;
- scmd->request_bufflen = 252;
- scmd->request_buffer = kzalloc(scmd->request_bufflen, gfp_mask);
- if (!scmd->request_buffer)
+ sgl.page = alloc_page(gfp_mask);
+ if (!sgl.page)
return FAILED;
+ sgl.offset = 0;
+ sgl.length = 252;
+
+ scmd->sc_data_direction = DMA_FROM_DEVICE;
+ scmd->request_bufflen = sgl.length;
+ scmd->request_buffer = &sgl;
+ scmd->use_sg = 1;
} else {
scmd->request_buffer = NULL;
scmd->request_bufflen = 0;
scmd->sc_data_direction = DMA_NONE;
+ scmd->use_sg = 0;
}
scmd->underflow = 0;
- scmd->use_sg = 0;
scmd->cmd_len = COMMAND_SIZE(scmd->cmnd[0]);
if (sdev->scsi_level <= SCSI_2)
@@ -583,7 +598,7 @@ static int scsi_send_eh_cmnd(struct scsi_cmnd *scmd, unsigned char *cmnd,
memcpy(scmd->sense_buffer, scmd->request_buffer,
sizeof(scmd->sense_buffer));
}
- kfree(scmd->request_buffer);
+ __free_page(sgl.page);
}
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 3ac4890ce08..2f12f9f12fc 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -996,25 +996,14 @@ static int scsi_init_io(struct scsi_cmnd *cmd)
int count;
/*
- * if this is a rq->data based REQ_BLOCK_PC, setup for a non-sg xfer
- */
- if (blk_pc_request(req) && !req->bio) {
- cmd->request_bufflen = req->data_len;
- cmd->request_buffer = req->data;
- req->buffer = req->data;
- cmd->use_sg = 0;
- return 0;
- }
-
- /*
- * we used to not use scatter-gather for single segment request,
+ * We used to not use scatter-gather for single segment request,
* but now we do (it makes highmem I/O easier to support without
* kmapping pages)
*/
cmd->use_sg = req->nr_phys_segments;
/*
- * if sg table allocation fails, requeue request later.
+ * If sg table allocation fails, requeue request later.
*/
sgpnt = scsi_alloc_sgtable(cmd, GFP_ATOMIC);
if (unlikely(!sgpnt)) {
@@ -1022,24 +1011,21 @@ static int scsi_init_io(struct scsi_cmnd *cmd)
return BLKPREP_DEFER;
}
+ req->buffer = NULL;
cmd->request_buffer = (char *) sgpnt;
- cmd->request_bufflen = req->nr_sectors << 9;
if (blk_pc_request(req))
cmd->request_bufflen = req->data_len;
- req->buffer = NULL;
+ else
+ cmd->request_bufflen = req->nr_sectors << 9;
/*
* Next, walk the list, and fill in the addresses and sizes of
* each segment.
*/
count = blk_rq_map_sg(req->q, req, cmd->request_buffer);
-
- /*
- * mapped well, send it off
- */
if (likely(count <= cmd->use_sg)) {
cmd->use_sg = count;
- return 0;
+ return BLKPREP_OK;
}
printk(KERN_ERR "Incorrect number of segments after building list\n");
@@ -1069,6 +1055,27 @@ static int scsi_issue_flush_fn(request_queue_t *q, struct gendisk *disk,
return -EOPNOTSUPP;
}
+static struct scsi_cmnd *scsi_get_cmd_from_req(struct scsi_device *sdev,
+ struct request *req)
+{
+ struct scsi_cmnd *cmd;
+
+ if (!req->special) {
+ cmd = scsi_get_command(sdev, GFP_ATOMIC);
+ if (unlikely(!cmd))
+ return NULL;
+ req->special = cmd;
+ } else {
+ cmd = req->special;
+ }
+
+ /* pull a tag out of the request if we have one */
+ cmd->tag = req->tag;
+ cmd->request = req;
+
+ return cmd;
+}
+
static void scsi_blk_pc_done(struct scsi_cmnd *cmd)
{
BUG_ON(!blk_pc_request(cmd->request));
@@ -1081,9 +1088,37 @@ static void scsi_blk_pc_done(struct scsi_cmnd *cmd)
scsi_io_completion(cmd, cmd->request_bufflen);
}
-static void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd)
+static int scsi_setup_blk_pc_cmnd(struct scsi_device *sdev, struct request *req)
{
- struct request *req = cmd->request;
+ struct scsi_cmnd *cmd;
+
+ cmd = scsi_get_cmd_from_req(sdev, req);
+ if (unlikely(!cmd))
+ return BLKPREP_DEFER;
+
+ /*
+ * BLOCK_PC requests may transfer data, in which case they must
+ * a bio attached to them. Or they might contain a SCSI command
+ * that does not transfer data, in which case they may optionally
+ * submit a request without an attached bio.
+ */
+ if (req->bio) {
+ int ret;
+
+ BUG_ON(!req->nr_phys_segments);
+
+ ret = scsi_init_io(cmd);
+ if (unlikely(ret))
+ return ret;
+ } else {
+ BUG_ON(req->data_len);
+ BUG_ON(req->data);
+
+ cmd->request_bufflen = 0;
+ cmd->request_buffer = NULL;
+ cmd->use_sg = 0;
+ req->buffer = NULL;
+ }
BUILD_BUG_ON(sizeof(req->cmd) > sizeof(cmd->cmnd));
memcpy(cmd->cmnd, req->cmd, sizeof(cmd->cmnd));
@@ -1099,154 +1134,138 @@ static void scsi_setup_blk_pc_cmnd(struct scsi_cmnd *cmd)
cmd->allowed = req->retries;
cmd->timeout_per_command = req->timeout;
cmd->done = scsi_blk_pc_done;
+ return BLKPREP_OK;
}
-static int scsi_prep_fn(struct request_queue *q, struct request *req)
+/*
+ * Setup a REQ_TYPE_FS command. These are simple read/write request
+ * from filesystems that still need to be translated to SCSI CDBs from
+ * the ULD.
+ */
+static int scsi_setup_fs_cmnd(struct scsi_device *sdev, struct request *req)
{
- struct scsi_device *sdev = q->queuedata;
struct scsi_cmnd *cmd;
- int specials_only = 0;
+ struct scsi_driver *drv;
+ int ret;
/*
- * Just check to see if the device is online. If it isn't, we
- * refuse to process any commands. The device must be brought
- * online before trying any recovery commands
+ * Filesystem requests must transfer data.
*/
- if (unlikely(!scsi_device_online(sdev))) {
- sdev_printk(KERN_ERR, sdev,
- "rejecting I/O to offline device\n");
- goto kill;
- }
- if (unlikely(sdev->sdev_state != SDEV_RUNNING)) {
- /* OK, we're not in a running state don't prep
- * user commands */
- if (sdev->sdev_state == SDEV_DEL) {
- /* Device is fully deleted, no commands
- * at all allowed down */
- sdev_printk(KERN_ERR, sdev,
- "rejecting I/O to dead device\n");
- goto kill;
- }
- /* OK, we only allow special commands (i.e. not
- * user initiated ones */
- specials_only = sdev->sdev_state;
+ BUG_ON(!req->nr_phys_segments);
+
+ cmd = scsi_get_cmd_from_req(sdev, req);
+ if (unlikely(!cmd))
+ return BLKPREP_DEFER;
+
+ ret = scsi_init_io(cmd);
+ if (unlikely(ret))
+ return ret;
+
+ /*
+ * Initialize the actual SCSI command for this request.
+ */
+ drv = *(struct scsi_driver **)req->rq_disk->private_data;
+ if (unlikely(!drv->init_command(cmd))) {
+ scsi_release_buffers(cmd);
+ scsi_put_command(cmd);
+ return BLKPREP_KILL;
}
+ return BLKPREP_OK;
+}
+
+static int scsi_prep_fn(struct request_queue *q, struct request *req)
+{
+ struct scsi_device *sdev = q->queuedata;
+ int ret = BLKPREP_OK;
+
/*
- * Find the actual device driver associated with this command.
- * The SPECIAL requests are things like character device or
- * ioctls, which did not originate from ll_rw_blk. Note that
- * the special field is also used to indicate the cmd for
- * the remainder of a partially fulfilled request that can
- * come up when there is a medium error. We have to treat
- * these two cases differently. We differentiate by looking
- * at request->cmd, as this tells us the real story.
+ * If the device is not in running state we will reject some
+ * or all commands.
*/
- if (blk_special_request(req) && req->special)
- cmd = req->special;
- else if (blk_pc_request(req) || blk_fs_request(req)) {
- if (unlikely(specials_only) && !(req->cmd_flags & REQ_PREEMPT)){
- if (specials_only == SDEV_QUIESCE ||
- specials_only == SDEV_BLOCK)
- goto defer;
-
+ if (unlikely(sdev->sdev_state != SDEV_RUNNING)) {
+ switch (sdev->sdev_state) {
+ case SDEV_OFFLINE:
+ /*
+ * If the device is offline we refuse to process any
+ * commands. The device must be brought online
+ * before trying any recovery commands.
+ */
sdev_printk(KERN_ERR, sdev,
- "rejecting I/O to device being removed\n");
- goto kill;
+ "rejecting I/O to offline device\n");
+ ret = BLKPREP_KILL;
+ break;
+ case SDEV_DEL:
+ /*
+ * If the device is fully deleted, we refuse to
+ * process any commands as well.
+ */
+ sdev_printk(KERN_ERR, sdev,
+ "rejecting I/O to dead device\n");
+ ret = BLKPREP_KILL;
+ break;
+ case SDEV_QUIESCE:
+ case SDEV_BLOCK:
+ /*
+ * If the devices is blocked we defer normal commands.
+ */
+ if (!(req->cmd_flags & REQ_PREEMPT))
+ ret = BLKPREP_DEFER;
+ break;
+ default:
+ /*
+ * For any other not fully online state we only allow
+ * special commands. In particular any user initiated
+ * command is not allowed.
+ */
+ if (!(req->cmd_flags & REQ_PREEMPT))
+ ret = BLKPREP_KILL;
+ break;
}
-
- /*
- * Now try and find a command block that we can use.
- */
- if (!req->special) {
- cmd = scsi_get_command(sdev, GFP_ATOMIC);
- if (unlikely(!cmd))
- goto defer;
- } else
- cmd = req->special;
-
- /* pull a tag out of the request if we have one */
- cmd->tag = req->tag;
- } else {
- blk_dump_rq_flags(req, "SCSI bad req");
- goto kill;
+
+ if (ret != BLKPREP_OK)
+ goto out;
}
-
- /* note the overloading of req->special. When the tag
- * is active it always means cmd. If the tag goes
- * back for re-queueing, it may be reset */
- req->special = cmd;
- cmd->request = req;
-
- /*
- * FIXME: drop the lock here because the functions below
- * expect to be called without the queue lock held. Also,
- * previously, we dequeued the request before dropping the
- * lock. We hope REQ_STARTED prevents anything untoward from
- * happening now.
- */
- if (blk_fs_request(req) || blk_pc_request(req)) {
- int ret;
+ switch (req->cmd_type) {
+ case REQ_TYPE_BLOCK_PC:
+ ret = scsi_setup_blk_pc_cmnd(sdev, req);
+ break;
+ case REQ_TYPE_FS:
+ ret = scsi_setup_fs_cmnd(sdev, req);
+ break;
+ default:
/*
- * This will do a couple of things:
- * 1) Fill in the actual SCSI command.
- * 2) Fill in any other upper-level specific fields
- * (timeout).
+ * All other command types are not supported.
*
- * If this returns 0, it means that the request failed
- * (reading past end of disk, reading offline device,
- * etc). This won't actually talk to the device, but
- * some kinds of consistency checking may cause the
- * request to be rejected immediately.
+ * Note that these days the SCSI subsystem does not use
+ * REQ_TYPE_SPECIAL requests anymore. These are only used
+ * (directly or via blk_insert_request) by non-SCSI drivers.
*/
+ blk_dump_rq_flags(req, "SCSI bad req");
+ ret = BLKPREP_KILL;
+ break;
+ }
- /*
- * This sets up the scatter-gather table (allocating if
- * required).
- */
- ret = scsi_init_io(cmd);
- switch(ret) {
- /* For BLKPREP_KILL/DEFER the cmd was released */
- case BLKPREP_KILL:
- goto kill;
- case BLKPREP_DEFER:
- goto defer;
- }
-
+ out:
+ switch (ret) {
+ case BLKPREP_KILL:
+ req->errors = DID_NO_CONNECT << 16;
+ break;
+ case BLKPREP_DEFER:
/*
- * Initialize the actual SCSI command for this request.
+ * If we defer, the elv_next_request() returns NULL, but the
+ * queue must be restarted, so we plug here if no returning
+ * command will automatically do that.
*/
- if (blk_pc_request(req)) {
- scsi_setup_blk_pc_cmnd(cmd);
- } else if (req->rq_disk) {
- struct scsi_driver *drv;
-
- drv = *(struct scsi_driver **)req->rq_disk->private_data;
- if (unlikely(!drv->init_command(cmd))) {
- scsi_release_buffers(cmd);
- scsi_put_command(cmd);
- goto kill;
- }
- }
+ if (sdev->device_busy == 0)
+ blk_plug_device(q);
+ break;
+ default:
+ req->cmd_flags |= REQ_DONTPREP;
}
- /*
- * The request is now prepped, no need to come back here
- */
- req->cmd_flags |= REQ_DONTPREP;
- return BLKPREP_OK;
-
- defer:
- /* If we defer, the elv_next_request() returns NULL, but the
- * queue must be restarted, so we plug here if no returning
- * command will automatically do that. */
- if (sdev->device_busy == 0)
- blk_plug_device(q);
- return BLKPREP_DEFER;
- kill:
- req->errors = DID_NO_CONNECT << 16;
- return BLKPREP_KILL;
+ return ret;
}
/*
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index 5d023d44e5e..f458c2f686d 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -39,6 +39,9 @@ static inline void scsi_log_completion(struct scsi_cmnd *cmd, int disposition)
{ };
#endif
+/* scsi_scan.c */
+int scsi_complete_async_scans(void);
+
/* scsi_devinfo.c */
extern int scsi_get_device_flags(struct scsi_device *sdev,
const unsigned char *vendor,
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 94a274645f6..aa1b1e0e9d2 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -29,7 +29,9 @@
#include <linux/moduleparam.h>
#include <linux/init.h>
#include <linux/blkdev.h>
-#include <asm/semaphore.h>
+#include <linux/delay.h>
+#include <linux/kthread.h>
+#include <linux/spinlock.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
@@ -87,6 +89,11 @@ module_param_named(max_luns, max_scsi_luns, int, S_IRUGO|S_IWUSR);
MODULE_PARM_DESC(max_luns,
"last scsi LUN (should be between 1 and 2^32-1)");
+static char scsi_scan_type[6] = "sync";
+
+module_param_string(scan, scsi_scan_type, sizeof(scsi_scan_type), S_IRUGO);
+MODULE_PARM_DESC(scan, "sync, async or none");
+
/*
* max_scsi_report_luns: the maximum number of LUNS that will be
* returned from the REPORT LUNS command. 8 times this value must
@@ -108,6 +115,68 @@ MODULE_PARM_DESC(inq_timeout,
"Timeout (in seconds) waiting for devices to answer INQUIRY."
" Default is 5. Some non-compliant devices need more.");
+static DEFINE_SPINLOCK(async_scan_lock);
+static LIST_HEAD(scanning_hosts);
+
+struct async_scan_data {
+ struct list_head list;
+ struct Scsi_Host *shost;
+ struct completion prev_finished;
+};
+
+/**
+ * scsi_complete_async_scans - Wait for asynchronous scans to complete
+ *
+ * Asynchronous scans add themselves to the scanning_hosts list. Once
+ * that list is empty, we know that the scans are complete. Rather than
+ * waking up periodically to check the state of the list, we pretend to be
+ * a scanning task by adding ourselves at the end of the list and going to
+ * sleep. When the task before us wakes us up, we take ourselves off the
+ * list and return.
+ */
+int scsi_complete_async_scans(void)
+{
+ struct async_scan_data *data;
+
+ do {
+ if (list_empty(&scanning_hosts))
+ return 0;
+ /* If we can't get memory immediately, that's OK. Just
+ * sleep a little. Even if we never get memory, the async
+ * scans will finish eventually.
+ */
+ data = kmalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ msleep(1);
+ } while (!data);
+
+ data->shost = NULL;
+ init_completion(&data->prev_finished);
+
+ spin_lock(&async_scan_lock);
+ /* Check that there's still somebody else on the list */
+ if (list_empty(&scanning_hosts))
+ goto done;
+ list_add_tail(&data->list, &scanning_hosts);
+ spin_unlock(&async_scan_lock);
+
+ printk(KERN_INFO "scsi: waiting for bus probes to complete ...\n");
+ wait_for_completion(&data->prev_finished);
+
+ spin_lock(&async_scan_lock);
+ list_del(&data->list);
+ done:
+ spin_unlock(&async_scan_lock);
+
+ kfree(data);
+ return 0;
+}
+
+#ifdef MODULE
+/* Only exported for the benefit of scsi_wait_scan */
+EXPORT_SYMBOL_GPL(scsi_complete_async_scans);
+#endif
+
/**
* scsi_unlock_floptical - unlock device via a special MODE SENSE command
* @sdev: scsi device to send command to
@@ -619,7 +688,7 @@ static int scsi_probe_lun(struct scsi_device *sdev, unsigned char *inq_result,
* SCSI_SCAN_LUN_PRESENT: a new scsi_device was allocated and initialized
**/
static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
- int *bflags)
+ int *bflags, int async)
{
/*
* XXX do not save the inquiry, since it can change underneath us,
@@ -805,7 +874,7 @@ static int scsi_add_lun(struct scsi_device *sdev, unsigned char *inq_result,
* register it and tell the rest of the kernel
* about it.
*/
- if (scsi_sysfs_add_sdev(sdev) != 0)
+ if (!async && scsi_sysfs_add_sdev(sdev) != 0)
return SCSI_SCAN_NO_RESPONSE;
return SCSI_SCAN_LUN_PRESENT;
@@ -974,7 +1043,7 @@ static int scsi_probe_and_add_lun(struct scsi_target *starget,
goto out_free_result;
}
- res = scsi_add_lun(sdev, result, &bflags);
+ res = scsi_add_lun(sdev, result, &bflags, shost->async_scan);
if (res == SCSI_SCAN_LUN_PRESENT) {
if (bflags & BLIST_KEY) {
sdev->lockable = 0;
@@ -1474,6 +1543,9 @@ void scsi_scan_target(struct device *parent, unsigned int channel,
{
struct Scsi_Host *shost = dev_to_shost(parent);
+ if (!shost->async_scan)
+ scsi_complete_async_scans();
+
mutex_lock(&shost->scan_mutex);
if (scsi_host_scan_allowed(shost))
__scsi_scan_target(parent, channel, id, lun, rescan);
@@ -1519,6 +1591,9 @@ int scsi_scan_host_selected(struct Scsi_Host *shost, unsigned int channel,
"%s: <%u:%u:%u>\n",
__FUNCTION__, channel, id, lun));
+ if (!shost->async_scan)
+ scsi_complete_async_scans();
+
if (((channel != SCAN_WILD_CARD) && (channel > shost->max_channel)) ||
((id != SCAN_WILD_CARD) && (id >= shost->max_id)) ||
((lun != SCAN_WILD_CARD) && (lun > shost->max_lun)))
@@ -1539,14 +1614,130 @@ int scsi_scan_host_selected(struct Scsi_Host *shost, unsigned int channel,
return 0;
}
+static void scsi_sysfs_add_devices(struct Scsi_Host *shost)
+{
+ struct scsi_device *sdev;
+ shost_for_each_device(sdev, shost) {
+ if (scsi_sysfs_add_sdev(sdev) != 0)
+ scsi_destroy_sdev(sdev);
+ }
+}
+
+/**
+ * scsi_prep_async_scan - prepare for an async scan
+ * @shost: the host which will be scanned
+ * Returns: a cookie to be passed to scsi_finish_async_scan()
+ *
+ * Tells the midlayer this host is going to do an asynchronous scan.
+ * It reserves the host's position in the scanning list and ensures
+ * that other asynchronous scans started after this one won't affect the
+ * ordering of the discovered devices.
+ */
+struct async_scan_data *scsi_prep_async_scan(struct Scsi_Host *shost)
+{
+ struct async_scan_data *data;
+
+ if (strncmp(scsi_scan_type, "sync", 4) == 0)
+ return NULL;
+
+ if (shost->async_scan) {
+ printk("%s called twice for host %d", __FUNCTION__,
+ shost->host_no);
+ dump_stack();
+ return NULL;
+ }
+
+ data = kmalloc(sizeof(*data), GFP_KERNEL);
+ if (!data)
+ goto err;
+ data->shost = scsi_host_get(shost);
+ if (!data->shost)
+ goto err;
+ init_completion(&data->prev_finished);
+
+ spin_lock(&async_scan_lock);
+ shost->async_scan = 1;
+ if (list_empty(&scanning_hosts))
+ complete(&data->prev_finished);
+ list_add_tail(&data->list, &scanning_hosts);
+ spin_unlock(&async_scan_lock);
+
+ return data;
+
+ err:
+ kfree(data);
+ return NULL;
+}
+
+/**
+ * scsi_finish_async_scan - asynchronous scan has finished
+ * @data: cookie returned from earlier call to scsi_prep_async_scan()
+ *
+ * All the devices currently attached to this host have been found.
+ * This function announces all the devices it has found to the rest
+ * of the system.
+ */
+void scsi_finish_async_scan(struct async_scan_data *data)
+{
+ struct Scsi_Host *shost;
+
+ if (!data)
+ return;
+
+ shost = data->shost;
+ if (!shost->async_scan) {
+ printk("%s called twice for host %d", __FUNCTION__,
+ shost->host_no);
+ dump_stack();
+ return;
+ }
+
+ wait_for_completion(&data->prev_finished);
+
+ scsi_sysfs_add_devices(shost);
+
+ spin_lock(&async_scan_lock);
+ shost->async_scan = 0;
+ list_del(&data->list);
+ if (!list_empty(&scanning_hosts)) {
+ struct async_scan_data *next = list_entry(scanning_hosts.next,
+ struct async_scan_data, list);
+ complete(&next->prev_finished);
+ }
+ spin_unlock(&async_scan_lock);
+
+ scsi_host_put(shost);
+ kfree(data);
+}
+
+static int do_scan_async(void *_data)
+{
+ struct async_scan_data *data = _data;
+ scsi_scan_host_selected(data->shost, SCAN_WILD_CARD, SCAN_WILD_CARD,
+ SCAN_WILD_CARD, 0);
+
+ scsi_finish_async_scan(data);
+ return 0;
+}
+
/**
* scsi_scan_host - scan the given adapter
* @shost: adapter to scan
**/
void scsi_scan_host(struct Scsi_Host *shost)
{
- scsi_scan_host_selected(shost, SCAN_WILD_CARD, SCAN_WILD_CARD,
- SCAN_WILD_CARD, 0);
+ struct async_scan_data *data;
+
+ if (strncmp(scsi_scan_type, "none", 4) == 0)
+ return;
+
+ data = scsi_prep_async_scan(shost);
+ if (!data) {
+ scsi_scan_host_selected(shost, SCAN_WILD_CARD, SCAN_WILD_CARD,
+ SCAN_WILD_CARD, 0);
+ return;
+ }
+ kthread_run(do_scan_async, data, "scsi_scan_%d", shost->host_no);
}
EXPORT_SYMBOL(scsi_scan_host);
diff --git a/drivers/scsi/scsi_wait_scan.c b/drivers/scsi/scsi_wait_scan.c
new file mode 100644
index 00000000000..8a636103083
--- /dev/null
+++ b/drivers/scsi/scsi_wait_scan.c
@@ -0,0 +1,31 @@
+/*
+ * scsi_wait_scan.c
+ *
+ * Copyright (C) 2006 James Bottomley <James.Bottomley@SteelEye.com>
+ *
+ * This is a simple module to wait until all the async scans are
+ * complete. The idea is to use it in initrd/initramfs scripts. You
+ * modprobe it after all the modprobes of the root SCSI drivers and it
+ * will wait until they have all finished scanning their busses before
+ * allowing the boot to proceed
+ */
+
+#include <linux/module.h>
+#include "scsi_priv.h"
+
+static int __init wait_scan_init(void)
+{
+ scsi_complete_async_scans();
+ return 0;
+}
+
+static void __exit wait_scan_exit(void)
+{
+}
+
+MODULE_DESCRIPTION("SCSI wait for scans");
+MODULE_AUTHOR("James Bottomley");
+MODULE_LICENSE("GPL");
+
+late_initcall(wait_scan_init);
+module_exit(wait_scan_exit);
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 84ff203ffed..f6a452846fa 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -1051,6 +1051,14 @@ sd_spinup_disk(struct scsi_disk *sdkp, char *diskname)
&sshdr, SD_TIMEOUT,
SD_MAX_RETRIES);
+ /*
+ * If the drive has indicated to us that it
+ * doesn't have any media in it, don't bother
+ * with any more polling.
+ */
+ if (media_not_present(sdkp, &sshdr))
+ return;
+
if (the_result)
sense_valid = scsi_sense_valid(&sshdr);
retries++;
@@ -1059,14 +1067,6 @@ sd_spinup_disk(struct scsi_disk *sdkp, char *diskname)
((driver_byte(the_result) & DRIVER_SENSE) &&
sense_valid && sshdr.sense_key == UNIT_ATTENTION)));
- /*
- * If the drive has indicated to us that it doesn't have
- * any media in it, don't bother with any of the rest of
- * this crap.
- */
- if (media_not_present(sdkp, &sshdr))
- return;
-
if ((driver_byte(the_result) & DRIVER_SENSE) == 0) {
/* no sense, TUR either succeeded or failed
* with a status error */
@@ -1467,7 +1467,6 @@ sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
res = sd_do_mode_sense(sdp, dbd, modepage, buffer, len, &data, &sshdr);
if (scsi_status_is_good(res)) {
- int ct = 0;
int offset = data.header_length + data.block_descriptor_length;
if (offset >= SD_BUF_SIZE - 2) {
@@ -1496,11 +1495,13 @@ sd_read_cache_type(struct scsi_disk *sdkp, char *diskname,
sdkp->DPOFUA = 0;
}
- ct = sdkp->RCD + 2*sdkp->WCE;
-
- printk(KERN_NOTICE "SCSI device %s: drive cache: %s%s\n",
- diskname, sd_cache_types[ct],
- sdkp->DPOFUA ? " w/ FUA" : "");
+ printk(KERN_NOTICE "SCSI device %s: "
+ "write cache: %s, read cache: %s, %s\n",
+ diskname,
+ sdkp->WCE ? "enabled" : "disabled",
+ sdkp->RCD ? "disabled" : "enabled",
+ sdkp->DPOFUA ? "supports DPO and FUA"
+ : "doesn't support DPO or FUA");
return;
}
diff --git a/drivers/scsi/st.c b/drivers/scsi/st.c
index e1a52c525ed..587274dd705 100644
--- a/drivers/scsi/st.c
+++ b/drivers/scsi/st.c
@@ -9,7 +9,7 @@
Steve Hirsch, Andreas Koppenh"ofer, Michael Leodolter, Eyal Lebedinsky,
Michael Schaefer, J"org Weule, and Eric Youngdale.
- Copyright 1992 - 2005 Kai Makisara
+ Copyright 1992 - 2006 Kai Makisara
email Kai.Makisara@kolumbus.fi
Some small formal changes - aeb, 950809
@@ -17,7 +17,7 @@
Last modified: 18-JAN-1998 Richard Gooch <rgooch@atnf.csiro.au> Devfs support
*/
-static const char *verstr = "20050830";
+static const char *verstr = "20061107";
#include <linux/module.h>
@@ -999,7 +999,7 @@ static int check_tape(struct scsi_tape *STp, struct file *filp)
STp->min_block = ((STp->buffer)->b_data[4] << 8) |
(STp->buffer)->b_data[5];
if ( DEB( debugging || ) !STp->inited)
- printk(KERN_WARNING
+ printk(KERN_INFO
"%s: Block limits %d - %d bytes.\n", name,
STp->min_block, STp->max_block);
} else {
@@ -1224,7 +1224,7 @@ static int st_flush(struct file *filp, fl_owner_t id)
}
DEBC( if (STp->nbr_requests)
- printk(KERN_WARNING "%s: Number of r/w requests %d, dio used in %d, pages %d (%d).\n",
+ printk(KERN_DEBUG "%s: Number of r/w requests %d, dio used in %d, pages %d (%d).\n",
name, STp->nbr_requests, STp->nbr_dio, STp->nbr_pages, STp->nbr_combinable));
if (STps->rw == ST_WRITING && !STp->pos_unknown) {
@@ -4056,11 +4056,11 @@ static int st_probe(struct device *dev)
goto out_free_tape;
}
- sdev_printk(KERN_WARNING, SDp,
+ sdev_printk(KERN_NOTICE, SDp,
"Attached scsi tape %s\n", tape_name(tpnt));
- printk(KERN_WARNING "%s: try direct i/o: %s (alignment %d B)\n",
- tape_name(tpnt), tpnt->try_dio ? "yes" : "no",
- queue_dma_alignment(SDp->request_queue) + 1);
+ sdev_printk(KERN_INFO, SDp, "%s: try direct i/o: %s (alignment %d B)\n",
+ tape_name(tpnt), tpnt->try_dio ? "yes" : "no",
+ queue_dma_alignment(SDp->request_queue) + 1);
return 0;
diff --git a/drivers/scsi/t128.h b/drivers/scsi/t128.h
index 646e840266e..76a069b7ac0 100644
--- a/drivers/scsi/t128.h
+++ b/drivers/scsi/t128.h
@@ -8,20 +8,20 @@
* drew@colorado.edu
* +1 (303) 440-4894
*
- * DISTRIBUTION RELEASE 3.
+ * DISTRIBUTION RELEASE 3.
*
- * For more information, please consult
+ * For more information, please consult
*
* Trantor Systems, Ltd.
* T128/T128F/T228 SCSI Host Adapter
* Hardware Specifications
- *
- * Trantor Systems, Ltd.
+ *
+ * Trantor Systems, Ltd.
* 5415 Randall Place
* Fremont, CA 94538
* 1+ (415) 770-1400, FAX 1+ (415) 770-9910
- *
- * and
+ *
+ * and
*
* NCR 5380 Family
* SCSI Protocol Controller
@@ -48,15 +48,15 @@
#define TDEBUG_TRANSFER 0x2
/*
- * The trantor boards are memory mapped. They use an NCR5380 or
+ * The trantor boards are memory mapped. They use an NCR5380 or
* equivalent (my sample board had part second sourced from ZILOG).
- * NCR's recommended "Pseudo-DMA" architecture is used, where
+ * NCR's recommended "Pseudo-DMA" architecture is used, where
* a PAL drives the DMA signals on the 5380 allowing fast, blind
- * transfers with proper handshaking.
+ * transfers with proper handshaking.
*/
/*
- * Note : a boot switch is provided for the purpose of informing the
+ * Note : a boot switch is provided for the purpose of informing the
* firmware to boot or not boot from attached SCSI devices. So, I imagine
* there are fewer people who've yanked the ROM like they do on the Seagate
* to make bootup faster, and I'll probably use this for autodetection.
@@ -92,19 +92,20 @@
#define T_DATA_REG_OFFSET 0x1e00 /* rw 512 bytes long */
#ifndef ASM
-static int t128_abort(Scsi_Cmnd *);
+static int t128_abort(struct scsi_cmnd *);
static int t128_biosparam(struct scsi_device *, struct block_device *,
sector_t, int*);
static int t128_detect(struct scsi_host_template *);
-static int t128_queue_command(Scsi_Cmnd *, void (*done)(Scsi_Cmnd *));
-static int t128_bus_reset(Scsi_Cmnd *);
+static int t128_queue_command(struct scsi_cmnd *,
+ void (*done)(struct scsi_cmnd *));
+static int t128_bus_reset(struct scsi_cmnd *);
#ifndef CMD_PER_LUN
#define CMD_PER_LUN 2
#endif
#ifndef CAN_QUEUE
-#define CAN_QUEUE 32
+#define CAN_QUEUE 32
#endif
#ifndef HOSTS_C
@@ -120,7 +121,7 @@ static int t128_bus_reset(Scsi_Cmnd *);
#define T128_address(reg) (base + T_5380_OFFSET + ((reg) * 0x20))
-#if !(TDEBUG & TDEBUG_TRANSFER)
+#if !(TDEBUG & TDEBUG_TRANSFER)
#define NCR5380_read(reg) readb(T128_address(reg))
#define NCR5380_write(reg, value) writeb((value),(T128_address(reg)))
#else
@@ -129,7 +130,7 @@ static int t128_bus_reset(Scsi_Cmnd *);
, instance->hostno, (reg), T128_address(reg))), readb(T128_address(reg)))
#define NCR5380_write(reg, value) { \
- printk("scsi%d : write %02x to register %d at address %08x\n", \
+ printk("scsi%d : write %02x to register %d at address %08x\n", \
instance->hostno, (value), (reg), T128_address(reg)); \
writeb((value), (T128_address(reg))); \
}
@@ -142,10 +143,10 @@ static int t128_bus_reset(Scsi_Cmnd *);
#define NCR5380_bus_reset t128_bus_reset
#define NCR5380_proc_info t128_proc_info
-/* 15 14 12 10 7 5 3
+/* 15 14 12 10 7 5 3
1101 0100 1010 1000 */
-
-#define T128_IRQS 0xc4a8
+
+#define T128_IRQS 0xc4a8
#endif /* else def HOSTS_C */
#endif /* ndef ASM */
diff --git a/include/scsi/libsas.h b/include/scsi/libsas.h
index 9582e840166..29f6e1af1bf 100644
--- a/include/scsi/libsas.h
+++ b/include/scsi/libsas.h
@@ -338,6 +338,8 @@ struct sas_ha_struct {
void (*notify_phy_event)(struct asd_sas_phy *, enum phy_event);
void *lldd_ha; /* not touched by sas class code */
+
+ struct list_head eh_done_q;
};
#define SHOST_TO_SAS_HA(_shost) (*(struct sas_ha_struct **)(_shost)->hostdata)
@@ -526,13 +528,16 @@ struct sas_task {
void *lldd_task; /* for use by LLDDs */
void *uldd_task;
+
+ struct work_struct abort_work;
};
-#define SAS_TASK_STATE_PENDING 1
-#define SAS_TASK_STATE_DONE 2
-#define SAS_TASK_STATE_ABORTED 4
+#define SAS_TASK_STATE_PENDING 1
+#define SAS_TASK_STATE_DONE 2
+#define SAS_TASK_STATE_ABORTED 4
+#define SAS_TASK_INITIATOR_ABORTED 8
static inline struct sas_task *sas_alloc_task(gfp_t flags)
{
@@ -592,6 +597,7 @@ struct sas_domain_function_template {
extern int sas_register_ha(struct sas_ha_struct *);
extern int sas_unregister_ha(struct sas_ha_struct *);
+int sas_phy_reset(struct sas_phy *phy, int hard_reset);
extern int sas_queuecommand(struct scsi_cmnd *,
void (*scsi_done)(struct scsi_cmnd *));
extern int sas_target_alloc(struct scsi_target *);
@@ -624,4 +630,6 @@ void sas_unregister_dev(struct domain_device *);
void sas_init_dev(struct domain_device *);
+void sas_task_abort(struct sas_task *task);
+
#endif /* _SASLIB_H_ */
diff --git a/include/scsi/scsi_device.h b/include/scsi/scsi_device.h
index b401c82036b..ebf31b16dc4 100644
--- a/include/scsi/scsi_device.h
+++ b/include/scsi/scsi_device.h
@@ -223,13 +223,13 @@ extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
struct scsi_device *);
/**
- * shost_for_each_device - iterate over all devices of a host
- * @sdev: iterator
- * @host: host whiches devices we want to iterate over
+ * shost_for_each_device - iterate over all devices of a host
+ * @sdev: the &struct scsi_device to use as a cursor
+ * @shost: the &struct scsi_host to iterate over
*
- * This traverses over each devices of @shost. The devices have
- * a reference that must be released by scsi_host_put when breaking
- * out of the loop.
+ * Iterator that returns each device attached to @shost. This loop
+ * takes a reference on each device and releases it at the end. If
+ * you break out of the loop, you must call scsi_device_put(sdev).
*/
#define shost_for_each_device(sdev, shost) \
for ((sdev) = __scsi_iterate_devices((shost), NULL); \
@@ -237,17 +237,17 @@ extern struct scsi_device *__scsi_iterate_devices(struct Scsi_Host *,
(sdev) = __scsi_iterate_devices((shost), (sdev)))
/**
- * __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
- * @sdev: iterator
- * @host: host whiches devices we want to iterate over
+ * __shost_for_each_device - iterate over all devices of a host (UNLOCKED)
+ * @sdev: the &struct scsi_device to use as a cursor
+ * @shost: the &struct scsi_host to iterate over
*
- * This traverses over each devices of @shost. It does _not_ take a
- * reference on the scsi_device, thus it the whole loop must be protected
- * by shost->host_lock.
+ * Iterator that returns each device attached to @shost. It does _not_
+ * take a reference on the scsi_device, so the whole loop must be
+ * protected by shost->host_lock.
*
- * Note: The only reason why drivers would want to use this is because
- * they're need to access the device list in irq context. Otherwise you
- * really want to use shost_for_each_device instead.
+ * Note: The only reason to use this is because you need to access the
+ * device list in interrupt context. Otherwise you really want to use
+ * shost_for_each_device instead.
*/
#define __shost_for_each_device(sdev, shost) \
list_for_each_entry((sdev), &((shost)->__devices), siblings)
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index 39c6f8cc20c..e618e711ea5 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -552,6 +552,9 @@ struct Scsi_Host {
/* task mgmt function in progress */
unsigned tmf_in_progress:1;
+ /* Asynchronous scan in progress */
+ unsigned async_scan:1;
+
/*
* Optional work queue to be utilized by the transport
*/
@@ -648,11 +651,6 @@ extern const char *scsi_host_state_name(enum scsi_host_state);
extern u64 scsi_calculate_bounce_limit(struct Scsi_Host *);
-static inline void scsi_assign_lock(struct Scsi_Host *shost, spinlock_t *lock)
-{
- shost->host_lock = lock;
-}
-
static inline struct device *scsi_get_device(struct Scsi_Host *shost)
{
return shost->shost_gendev.parent;
diff --git a/include/scsi/scsi_transport_sas.h b/include/scsi/scsi_transport_sas.h
index 53024377f3b..59633a82de4 100644
--- a/include/scsi/scsi_transport_sas.h
+++ b/include/scsi/scsi_transport_sas.h
@@ -73,6 +73,8 @@ struct sas_phy {
/* for the list of phys belonging to a port */
struct list_head port_siblings;
+
+ struct work_struct reset_work;
};
#define dev_to_phy(d) \