diff options
-rw-r--r-- | drivers/serial/bfin_5xx.c | 25 |
1 files changed, 10 insertions, 15 deletions
diff --git a/drivers/serial/bfin_5xx.c b/drivers/serial/bfin_5xx.c index e059475c91a..3a2aa7e277f 100644 --- a/drivers/serial/bfin_5xx.c +++ b/drivers/serial/bfin_5xx.c @@ -84,7 +84,7 @@ static void bfin_serial_mctrl_check(struct bfin_serial_port *uart); static void bfin_serial_stop_tx(struct uart_port *port) { struct bfin_serial_port *uart = (struct bfin_serial_port *)port; -#ifndef CONFIG_BF54x +#if !defined(CONFIG_BF54x) && !defined(CONFIG_SERIAL_BFIN_DMA) unsigned short ier; #endif @@ -307,7 +307,6 @@ static void bfin_serial_tx_chars(struct bfin_serial_port *uart) UART_PUT_CHAR(uart, uart->port.x_char); uart->port.icount.tx++; uart->port.x_char = 0; - return; } /* * Check the modem control lines before @@ -376,28 +375,26 @@ static void bfin_serial_dma_tx_chars(struct bfin_serial_port *uart) if (!uart->tx_done) return; - uart->tx_done = 0; + if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { + bfin_serial_stop_tx(&uart->port); + uart->tx_done = 1; + return; + } + if (uart->port.x_char) { UART_PUT_CHAR(uart, uart->port.x_char); uart->port.icount.tx++; uart->port.x_char = 0; - uart->tx_done = 1; - return; } + /* * Check the modem control lines before * transmitting anything. */ bfin_serial_mctrl_check(uart); - if (uart_circ_empty(xmit) || uart_tx_stopped(&uart->port)) { - bfin_serial_stop_tx(&uart->port); - uart->tx_done = 1; - return; - } - spin_lock_irqsave(&uart->port.lock, flags); uart->tx_count = CIRC_CNT(xmit->head, xmit->tail, UART_XMIT_SIZE); if (uart->tx_count > (UART_XMIT_SIZE - xmit->tail)) @@ -471,8 +468,6 @@ void bfin_serial_rx_dma_timeout(struct bfin_serial_port *uart) int x_pos, pos; int flags = 0; - bfin_serial_dma_tx_chars(uart); - spin_lock_irqsave(&uart->port.lock, flags); x_pos = DMA_RX_XCOUNT - get_dma_curr_xcount(uart->rx_dma_channel); if (x_pos == DMA_RX_XCOUNT) @@ -513,9 +508,9 @@ static irqreturn_t bfin_serial_dma_tx_int(int irq, void *dev_id) if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) uart_write_wakeup(&uart->port); - if (uart_circ_empty(xmit)) - bfin_serial_stop_tx(&uart->port); uart->tx_done = 1; + + bfin_serial_dma_tx_chars(uart); } spin_unlock(&uart->port.lock); |