aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c13
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c109
2 files changed, 117 insertions, 5 deletions
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 65fddf4ac3c..58ed6859c92 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -585,20 +585,25 @@ lpfc_do_work(void *p)
set_user_nice(current, -20);
phba->data_flags = 0;
- while (1) {
+ while (!kthread_should_stop()) {
/* wait and check worker queue activities */
rc = wait_event_interruptible(phba->work_waitq,
(test_and_clear_bit(LPFC_DATA_READY,
&phba->data_flags)
|| kthread_should_stop()));
- BUG_ON(rc);
-
- if (kthread_should_stop())
+ /* Signal wakeup shall terminate the worker thread */
+ if (rc) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_ELS,
+ "0433 Wakeup on signal: rc=x%x\n", rc);
break;
+ }
/* Attend pending lpfc data processing */
lpfc_work_done(phba);
}
+ phba->worker_thread = NULL;
+ lpfc_printf_log(phba, KERN_INFO, LOG_ELS,
+ "0432 Worker thread stopped.\n");
return 0;
}
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 1e2a9521853..b213d1d01fe 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -2708,7 +2708,7 @@ out:
* @pdev: pointer to PCI device
*
* This routine is to be registered to the kernel's PCI subsystem. When an
- * Emulex HBA is removed from PCI bus. It perform all the necessary cleanup
+ * Emulex HBA is removed from PCI bus, it performs all the necessary cleanup
* for the HBA device to be removed from the PCI subsystem properly.
**/
static void __devexit
@@ -2785,6 +2785,111 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
}
/**
+ * lpfc_pci_suspend_one: lpfc PCI func to suspend device for power management.
+ * @pdev: pointer to PCI device
+ * @msg: power management message
+ *
+ * This routine is to be registered to the kernel's PCI subsystem to support
+ * system Power Management (PM). When PM invokes this method, it quiesces the
+ * device by stopping the driver's worker thread for the device, turning off
+ * device's interrupt and DMA, and bring the device offline. Note that as the
+ * driver implements the minimum PM requirements to a power-aware driver's PM
+ * support for suspend/resume -- all the possible PM messages (SUSPEND,
+ * HIBERNATE, FREEZE) to the suspend() method call will be treated as SUSPEND
+ * and the driver will fully reinitialize its device during resume() method
+ * call, the driver will set device to PCI_D3hot state in PCI config space
+ * instead of setting it according to the @msg provided by the PM.
+ *
+ * Return code
+ * 0 - driver suspended the device
+ * Error otherwise
+ **/
+static int
+lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0473 PCI device Power Management suspend.\n");
+
+ /* Bring down the device */
+ lpfc_offline_prep(phba);
+ lpfc_offline(phba);
+ kthread_stop(phba->worker_thread);
+
+ /* Disable interrupt from device */
+ lpfc_disable_intr(phba);
+
+ /* Save device state to PCI config space */
+ pci_save_state(pdev);
+ pci_set_power_state(pdev, PCI_D3hot);
+
+ return 0;
+}
+
+/**
+ * lpfc_pci_resume_one: lpfc PCI func to resume device for power management.
+ * @pdev: pointer to PCI device
+ *
+ * This routine is to be registered to the kernel's PCI subsystem to support
+ * system Power Management (PM). When PM invokes this method, it restores
+ * the device's PCI config space state and fully reinitializes the device
+ * and brings it online. Note that as the driver implements the minimum PM
+ * requirements to a power-aware driver's PM for suspend/resume -- all
+ * the possible PM messages (SUSPEND, HIBERNATE, FREEZE) to the suspend()
+ * method call will be treated as SUSPEND and the driver will fully
+ * reinitialize its device during resume() method call, the device will be
+ * set to PCI_D0 directly in PCI config space before restoring the state.
+ *
+ * Return code
+ * 0 - driver suspended the device
+ * Error otherwise
+ **/
+static int
+lpfc_pci_resume_one(struct pci_dev *pdev)
+{
+ struct Scsi_Host *shost = pci_get_drvdata(pdev);
+ struct lpfc_hba *phba = ((struct lpfc_vport *)shost->hostdata)->phba;
+ int error;
+
+ lpfc_printf_log(phba, KERN_INFO, LOG_INIT,
+ "0452 PCI device Power Management resume.\n");
+
+ /* Restore device state from PCI config space */
+ pci_set_power_state(pdev, PCI_D0);
+ pci_restore_state(pdev);
+ if (pdev->is_busmaster)
+ pci_set_master(pdev);
+
+ /* Startup the kernel thread for this host adapter. */
+ phba->worker_thread = kthread_run(lpfc_do_work, phba,
+ "lpfc_worker_%d", phba->brd_no);
+ if (IS_ERR(phba->worker_thread)) {
+ error = PTR_ERR(phba->worker_thread);
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0434 PM resume failed to start worker "
+ "thread: error=x%x.\n", error);
+ return error;
+ }
+
+ /* Enable interrupt from device */
+ error = lpfc_enable_intr(phba);
+ if (error) {
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0430 PM resume Failed to enable interrupt: "
+ "error=x%x.\n", error);
+ return error;
+ }
+
+ /* Restart HBA and bring it online */
+ lpfc_sli_brdrestart(phba);
+ lpfc_online(phba);
+
+ return 0;
+}
+
+/**
* lpfc_io_error_detected: Driver method for handling PCI I/O error detected.
* @pdev: pointer to PCI device.
* @state: the current PCI connection state.
@@ -3036,6 +3141,8 @@ static struct pci_driver lpfc_driver = {
.id_table = lpfc_id_table,
.probe = lpfc_pci_probe_one,
.remove = __devexit_p(lpfc_pci_remove_one),
+ .suspend = lpfc_pci_suspend_one,
+ .resume = lpfc_pci_resume_one,
.err_handler = &lpfc_err_handler,
};