aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/usb/Kconfig1
-rw-r--r--drivers/usb/host/ehci-atmel.c230
-rw-r--r--drivers/usb/host/ehci-hcd.c5
3 files changed, 236 insertions, 0 deletions
diff --git a/drivers/usb/Kconfig b/drivers/usb/Kconfig
index 93cee3e5ca5..ebd7237230e 100644
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
@@ -60,6 +60,7 @@ config USB_ARCH_HAS_EHCI
default y if SOC_AU1200
default y if ARCH_IXP4XX
default y if ARCH_W90X900
+ default y if ARCH_AT91SAM9G45
default PCI
# ARM SA1111 chips have a non-PCI based "OHCI-compatible" USB host interface.
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c
new file mode 100644
index 00000000000..87c1b7c34c0
--- /dev/null
+++ b/drivers/usb/host/ehci-atmel.c
@@ -0,0 +1,230 @@
+/*
+ * Driver for EHCI UHP on Atmel chips
+ *
+ * Copyright (C) 2009 Atmel Corporation,
+ * Nicolas Ferre <nicolas.ferre@atmel.com>
+ *
+ * Based on various ehci-*.c drivers
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file COPYING in the main directory of this archive for
+ * more details.
+ */
+
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+/* interface and function clocks */
+static struct clk *iclk, *fclk;
+static int clocked;
+
+/*-------------------------------------------------------------------------*/
+
+static void atmel_start_clock(void)
+{
+ clk_enable(iclk);
+ clk_enable(fclk);
+ clocked = 1;
+}
+
+static void atmel_stop_clock(void)
+{
+ clk_disable(fclk);
+ clk_disable(iclk);
+ clocked = 0;
+}
+
+static void atmel_start_ehci(struct platform_device *pdev)
+{
+ dev_dbg(&pdev->dev, "start\n");
+ atmel_start_clock();
+}
+
+static void atmel_stop_ehci(struct platform_device *pdev)
+{
+ dev_dbg(&pdev->dev, "stop\n");
+ atmel_stop_clock();
+}
+
+/*-------------------------------------------------------------------------*/
+
+static int ehci_atmel_setup(struct usb_hcd *hcd)
+{
+ struct ehci_hcd *ehci = hcd_to_ehci(hcd);
+ int retval = 0;
+
+ /* registers start at offset 0x0 */
+ ehci->caps = hcd->regs;
+ ehci->regs = hcd->regs +
+ HC_LENGTH(ehci_readl(ehci, &ehci->caps->hc_capbase));
+ dbg_hcs_params(ehci, "reset");
+ dbg_hcc_params(ehci, "reset");
+
+ /* cache this readonly data; minimize chip reads */
+ ehci->hcs_params = ehci_readl(ehci, &ehci->caps->hcs_params);
+
+ retval = ehci_halt(ehci);
+ if (retval)
+ return retval;
+
+ /* data structure init */
+ retval = ehci_init(hcd);
+ if (retval)
+ return retval;
+
+ ehci->sbrn = 0x20;
+
+ ehci_reset(ehci);
+ ehci_port_power(ehci, 0);
+
+ return retval;
+}
+
+static const struct hc_driver ehci_atmel_hc_driver = {
+ .description = hcd_name,
+ .product_desc = "Atmel EHCI UHP HS",
+ .hcd_priv_size = sizeof(struct ehci_hcd),
+
+ /* generic hardware linkage */
+ .irq = ehci_irq,
+ .flags = HCD_MEMORY | HCD_USB2,
+
+ /* basic lifecycle operations */
+ .reset = ehci_atmel_setup,
+ .start = ehci_run,
+ .stop = ehci_stop,
+ .shutdown = ehci_shutdown,
+
+ /* managing i/o requests and associated device resources */
+ .urb_enqueue = ehci_urb_enqueue,
+ .urb_dequeue = ehci_urb_dequeue,
+ .endpoint_disable = ehci_endpoint_disable,
+
+ /* scheduling support */
+ .get_frame_number = ehci_get_frame,
+
+ /* root hub support */
+ .hub_status_data = ehci_hub_status_data,
+ .hub_control = ehci_hub_control,
+ .bus_suspend = ehci_bus_suspend,
+ .bus_resume = ehci_bus_resume,
+ .relinquish_port = ehci_relinquish_port,
+ .port_handed_over = ehci_port_handed_over,
+};
+
+static int __init ehci_atmel_drv_probe(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd;
+ const struct hc_driver *driver = &ehci_atmel_hc_driver;
+ struct resource *res;
+ int irq;
+ int retval;
+
+ if (usb_disabled())
+ return -ENODEV;
+
+ pr_debug("Initializing Atmel-SoC USB Host Controller\n");
+
+ irq = platform_get_irq(pdev, 0);
+ if (irq <= 0) {
+ dev_err(&pdev->dev,
+ "Found HC with no IRQ. Check %s setup!\n",
+ dev_name(&pdev->dev));
+ retval = -ENODEV;
+ goto fail_create_hcd;
+ }
+
+ hcd = usb_create_hcd(driver, &pdev->dev, dev_name(&pdev->dev));
+ if (!hcd) {
+ retval = -ENOMEM;
+ goto fail_create_hcd;
+ }
+
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+ if (!res) {
+ dev_err(&pdev->dev,
+ "Found HC with no register addr. Check %s setup!\n",
+ dev_name(&pdev->dev));
+ retval = -ENODEV;
+ goto fail_request_resource;
+ }
+ hcd->rsrc_start = res->start;
+ hcd->rsrc_len = res->end - res->start + 1;
+
+ if (!request_mem_region(hcd->rsrc_start, hcd->rsrc_len,
+ driver->description)) {
+ dev_dbg(&pdev->dev, "controller already in use\n");
+ retval = -EBUSY;
+ goto fail_request_resource;
+ }
+
+ hcd->regs = ioremap_nocache(hcd->rsrc_start, hcd->rsrc_len);
+ if (hcd->regs == NULL) {
+ dev_dbg(&pdev->dev, "error mapping memory\n");
+ retval = -EFAULT;
+ goto fail_ioremap;
+ }
+
+ iclk = clk_get(&pdev->dev, "ehci_clk");
+ if (IS_ERR(iclk)) {
+ dev_err(&pdev->dev, "Error getting interface clock\n");
+ retval = -ENOENT;
+ goto fail_get_iclk;
+ }
+ fclk = clk_get(&pdev->dev, "uhpck");
+ if (IS_ERR(fclk)) {
+ dev_err(&pdev->dev, "Error getting function clock\n");
+ retval = -ENOENT;
+ goto fail_get_fclk;
+ }
+
+ atmel_start_ehci(pdev);
+
+ retval = usb_add_hcd(hcd, irq, IRQF_SHARED);
+ if (retval)
+ goto fail_add_hcd;
+
+ return retval;
+
+fail_add_hcd:
+ atmel_stop_ehci(pdev);
+ clk_put(fclk);
+fail_get_fclk:
+ clk_put(iclk);
+fail_get_iclk:
+ iounmap(hcd->regs);
+fail_ioremap:
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+fail_request_resource:
+ usb_put_hcd(hcd);
+fail_create_hcd:
+ dev_err(&pdev->dev, "init %s fail, %d\n",
+ dev_name(&pdev->dev), retval);
+
+ return retval;
+}
+
+static int __exit ehci_atmel_drv_remove(struct platform_device *pdev)
+{
+ struct usb_hcd *hcd = platform_get_drvdata(pdev);
+
+ ehci_shutdown(hcd);
+ usb_remove_hcd(hcd);
+ iounmap(hcd->regs);
+ release_mem_region(hcd->rsrc_start, hcd->rsrc_len);
+ usb_put_hcd(hcd);
+
+ atmel_stop_ehci(pdev);
+ clk_put(fclk);
+ clk_put(iclk);
+ fclk = iclk = NULL;
+
+ return 0;
+}
+
+static struct platform_driver ehci_atmel_driver = {
+ .probe = ehci_atmel_drv_probe,
+ .remove = __exit_p(ehci_atmel_drv_remove),
+ .shutdown = usb_hcd_platform_shutdown,
+ .driver.name = "atmel-ehci",
+};
diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c
index 5fbc67c5a91..c227ba46d6f 100644
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
@@ -1136,6 +1136,11 @@ MODULE_LICENSE ("GPL");
#define PLATFORM_DRIVER ehci_hcd_w90x900_driver
#endif
+#ifdef CONFIG_ARCH_AT91
+#include "ehci-atmel.c"
+#define PLATFORM_DRIVER ehci_atmel_driver
+#endif
+
#if !defined(PCI_DRIVER) && !defined(PLATFORM_DRIVER) && \
!defined(PS3_SYSTEM_BUS_DRIVER) && !defined(OF_PLATFORM_DRIVER)
#error "missing bus glue for ehci-hcd"