aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/i386/kernel/cpu/cpufreq/longhaul.c60
1 files changed, 57 insertions, 3 deletions
diff --git a/arch/i386/kernel/cpu/cpufreq/longhaul.c b/arch/i386/kernel/cpu/cpufreq/longhaul.c
index ef8f0bc3fc7..f0cce3c2dc3 100644
--- a/arch/i386/kernel/cpu/cpufreq/longhaul.c
+++ b/arch/i386/kernel/cpu/cpufreq/longhaul.c
@@ -76,6 +76,7 @@ static unsigned int longhaul_index;
/* Module parameters */
static int scale_voltage;
static int disable_acpi_c3;
+static int revid_errata;
#define dprintk(msg...) cpufreq_debug_printk(CPUFREQ_DEBUG_DRIVER, "longhaul", msg)
@@ -168,7 +169,10 @@ static void do_powersaver(int cx_address, unsigned int clock_ratio_index,
rdmsrl(MSR_VIA_LONGHAUL, longhaul.val);
/* Setup new frequency */
- longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
+ if (!revid_errata)
+ longhaul.bits.RevisionKey = longhaul.bits.RevisionID;
+ else
+ longhaul.bits.RevisionKey = 0;
longhaul.bits.SoftBusRatio = clock_ratio_index & 0xf;
longhaul.bits.SoftBusRatio4 = (clock_ratio_index & 0x10) >> 4;
/* Setup new voltage */
@@ -272,7 +276,7 @@ static void longhaul_setstate(unsigned int table_index)
dprintk ("Setting to FSB:%dMHz Mult:%d.%dx (%s)\n",
fsb, mult/10, mult%10, print_speed(speed/1000));
-
+retry_loop:
preempt_disable();
local_irq_save(flags);
@@ -344,6 +348,47 @@ static void longhaul_setstate(unsigned int table_index)
preempt_enable();
freqs.new = calc_speed(longhaul_get_cpu_mult());
+ /* Check if requested frequency is set. */
+ if (unlikely(freqs.new != speed)) {
+ printk(KERN_INFO PFX "Failed to set requested frequency!\n");
+ /* Revision ID = 1 but processor is expecting revision key
+ * equal to 0. Jumpers at the bottom of processor will change
+ * multiplier and FSB, but will not change bits in Longhaul
+ * MSR nor enable voltage scaling. */
+ if (!revid_errata) {
+ printk(KERN_INFO PFX "Enabling \"Ignore Revision ID\" "
+ "option.\n");
+ revid_errata = 1;
+ msleep(200);
+ goto retry_loop;
+ }
+ /* Why ACPI C3 sometimes doesn't work is a mystery for me.
+ * But it does happen. Processor is entering ACPI C3 state,
+ * but it doesn't change frequency. I tried poking various
+ * bits in northbridge registers, but without success. */
+ if (longhaul_flags & USE_ACPI_C3) {
+ printk(KERN_INFO PFX "Disabling ACPI C3 support.\n");
+ longhaul_flags &= ~USE_ACPI_C3;
+ if (revid_errata) {
+ printk(KERN_INFO PFX "Disabling \"Ignore "
+ "Revision ID\" option.\n");
+ revid_errata = 0;
+ }
+ msleep(200);
+ goto retry_loop;
+ }
+ /* This shouldn't happen. Longhaul ver. 2 was reported not
+ * working on processors without voltage scaling, but with
+ * RevID = 1. RevID errata will make things right. Just
+ * to be 100% sure. */
+ if (longhaul_version == TYPE_LONGHAUL_V2) {
+ printk(KERN_INFO PFX "Switching to Longhaul ver. 1\n");
+ longhaul_version = TYPE_LONGHAUL_V1;
+ msleep(200);
+ goto retry_loop;
+ }
+ }
+ /* Report true CPU frequency */
cpufreq_notify_transition(&freqs, CPUFREQ_POSTCHANGE);
if (!bm_timeout)
@@ -956,11 +1001,20 @@ static void __exit longhaul_exit(void)
kfree(longhaul_table);
}
+/* Even if BIOS is exporting ACPI C3 state, and it is used
+ * with success when CPU is idle, this state doesn't
+ * trigger frequency transition in some cases. */
module_param (disable_acpi_c3, int, 0644);
MODULE_PARM_DESC(disable_acpi_c3, "Don't use ACPI C3 support");
-
+/* Change CPU voltage with frequency. Very usefull to save
+ * power, but most VIA C3 processors aren't supporting it. */
module_param (scale_voltage, int, 0644);
MODULE_PARM_DESC(scale_voltage, "Scale voltage of processor");
+/* Force revision key to 0 for processors which doesn't
+ * support voltage scaling, but are introducing itself as
+ * such. */
+module_param(revid_errata, int, 0644);
+MODULE_PARM_DESC(revid_errata, "Ignore CPU Revision ID");
MODULE_AUTHOR ("Dave Jones <davej@codemonkey.org.uk>");
MODULE_DESCRIPTION ("Longhaul driver for VIA Cyrix processors.");