aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/kernel-parameters.txt3
-rw-r--r--Documentation/x86_64/boot-options.txt109
-rw-r--r--arch/x86_64/Kconfig10
-rw-r--r--arch/x86_64/kernel/pci-dma.c28
4 files changed, 90 insertions, 60 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index d25acd51e18..733a736bc6c 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -104,6 +104,9 @@ loader, and have no meaning to the kernel directly.
Do not modify the syntax of boot loader parameters without extreme
need or coordination with <Documentation/i386/boot.txt>.
+There are also arch-specific kernel-parameters not documented here.
+See for example <Documentation/x86_64/boot-options.txt>.
+
Note that ALL kernel parameters listed below are CASE SENSITIVE, and that
a trailing = on the name of any parameter states that that parameter will
be entered as an environment variable, whereas its absence indicates that
diff --git a/Documentation/x86_64/boot-options.txt b/Documentation/x86_64/boot-options.txt
index 5c86ed6f044..0d653993f36 100644
--- a/Documentation/x86_64/boot-options.txt
+++ b/Documentation/x86_64/boot-options.txt
@@ -180,40 +180,81 @@ PCI
pci=lastbus=NUMBER Scan upto NUMBER busses, no matter what the mptable says.
pci=noacpi Don't use ACPI to set up PCI interrupt routing.
-IOMMU
-
- iommu=[size][,noagp][,off][,force][,noforce][,leak][,memaper[=order]][,merge]
- [,forcesac][,fullflush][,nomerge][,noaperture][,calgary]
- size set size of iommu (in bytes)
- noagp don't initialize the AGP driver and use full aperture.
- off don't use the IOMMU
- leak turn on simple iommu leak tracing (only when CONFIG_IOMMU_LEAK is on)
- memaper[=order] allocate an own aperture over RAM with size 32MB^order.
- noforce don't force IOMMU usage. Default.
- force Force IOMMU.
- merge Do SG merging. Implies force (experimental)
- nomerge Don't do SG merging.
- forcesac For SAC mode for masks <40bits (experimental)
- fullflush Flush IOMMU on each allocation (default)
- nofullflush Don't use IOMMU fullflush
- allowed overwrite iommu off workarounds for specific chipsets.
- soft Use software bounce buffering (default for Intel machines)
- noaperture Don't touch the aperture for AGP.
- allowdac Allow DMA >4GB
- When off all DMA over >4GB is forced through an IOMMU or bounce
- buffering.
- nodac Forbid DMA >4GB
- panic Always panic when IOMMU overflows
- calgary Use the Calgary IOMMU if it is available
-
- swiotlb=pages[,force]
-
- pages Prereserve that many 128K pages for the software IO bounce buffering.
- force Force all IO through the software TLB.
-
- calgary=[64k,128k,256k,512k,1M,2M,4M,8M]
- calgary=[translate_empty_slots]
- calgary=[disable=<PCI bus number>]
+IOMMU (input/output memory management unit)
+
+ Currently four x86-64 PCI-DMA mapping implementations exist:
+
+ 1. <arch/x86_64/kernel/pci-nommu.c>: use no hardware/software IOMMU at all
+ (e.g. because you have < 3 GB memory).
+ Kernel boot message: "PCI-DMA: Disabling IOMMU"
+
+ 2. <arch/x86_64/kernel/pci-gart.c>: AMD GART based hardware IOMMU.
+ Kernel boot message: "PCI-DMA: using GART IOMMU"
+
+ 3. <arch/x86_64/kernel/pci-swiotlb.c> : Software IOMMU implementation. Used
+ e.g. if there is no hardware IOMMU in the system and it is need because
+ you have >3GB memory or told the kernel to us it (iommu=soft))
+ Kernel boot message: "PCI-DMA: Using software bounce buffering
+ for IO (SWIOTLB)"
+
+ 4. <arch/x86_64/pci-calgary.c> : IBM Calgary hardware IOMMU. Used in IBM
+ pSeries and xSeries servers. This hardware IOMMU supports DMA address
+ mapping with memory protection, etc.
+ Kernel boot message: "PCI-DMA: Using Calgary IOMMU"
+
+ iommu=[<size>][,noagp][,off][,force][,noforce][,leak[=<nr_of_leak_pages>]
+ [,memaper[=<order>]][,merge][,forcesac][,fullflush][,nomerge]
+ [,noaperture][,calgary]
+
+ General iommu options:
+ off Don't initialize and use any kind of IOMMU.
+ noforce Don't force hardware IOMMU usage when it is not needed.
+ (default).
+ force Force the use of the hardware IOMMU even when it is
+ not actually needed (e.g. because < 3 GB memory).
+ soft Use software bounce buffering (SWIOTLB) (default for
+ Intel machines). This can be used to prevent the usage
+ of an available hardware IOMMU.
+
+ iommu options only relevant to the AMD GART hardware IOMMU:
+ <size> Set the size of the remapping area in bytes.
+ allowed Overwrite iommu off workarounds for specific chipsets.
+ fullflush Flush IOMMU on each allocation (default).
+ nofullflush Don't use IOMMU fullflush.
+ leak Turn on simple iommu leak tracing (only when
+ CONFIG_IOMMU_LEAK is on). Default number of leak pages
+ is 20.
+ memaper[=<order>] Allocate an own aperture over RAM with size 32MB<<order.
+ (default: order=1, i.e. 64MB)
+ merge Do scather-gather (SG) merging. Implies "force"
+ (experimental).
+ nomerge Don't do scather-gather (SG) merging.
+ noaperture Ask the IOMMU not to touch the aperture for AGP.
+ forcesac Force single-address cycle (SAC) mode for masks <40bits
+ (experimental).
+ noagp Don't initialize the AGP driver and use full aperture.
+ allowdac Allow double-address cycle (DAC) mode, i.e. DMA >4GB.
+ DAC is used with 32-bit PCI to push a 64-bit address in
+ two cycles. When off all DMA over >4GB is forced through
+ an IOMMU or software bounce buffering.
+ nodac Forbid DAC mode, i.e. DMA >4GB.
+ panic Always panic when IOMMU overflows.
+ calgary Use the Calgary IOMMU if it is available
+
+ iommu options only relevant to the software bounce buffering (SWIOTLB) IOMMU
+ implementation:
+ swiotlb=<pages>[,force]
+ <pages> Prereserve that many 128K pages for the software IO
+ bounce buffering.
+ force Force all IO through the software TLB.
+
+ Settings for the IBM Calgary hardware IOMMU currently found in IBM
+ pSeries and xSeries machines:
+
+ calgary=[64k,128k,256k,512k,1M,2M,4M,8M]
+ calgary=[translate_empty_slots]
+ calgary=[disable=<PCI bus number>]
+ panic Always panic when IOMMU overflows
64k,...,8M - Set the size of each PCI slot's translation table
when using the Calgary IOMMU. This is the size of the translation
diff --git a/arch/x86_64/Kconfig b/arch/x86_64/Kconfig
index 02dd39457bc..a55382a1bb4 100644
--- a/arch/x86_64/Kconfig
+++ b/arch/x86_64/Kconfig
@@ -458,8 +458,8 @@ config IOMMU
on systems with more than 3GB. This is usually needed for USB,
sound, many IDE/SATA chipsets and some other devices.
Provides a driver for the AMD Athlon64/Opteron/Turion/Sempron GART
- based IOMMU and a software bounce buffer based IOMMU used on Intel
- systems and as fallback.
+ based hardware IOMMU and a software bounce buffer based IOMMU used
+ on Intel systems and as fallback.
The code is only active when needed (enough memory and limited
device) unless CONFIG_IOMMU_DEBUG or iommu=force is specified
too.
@@ -496,6 +496,12 @@ config CALGARY_IOMMU_ENABLED_BY_DEFAULT
# need this always selected by IOMMU for the VIA workaround
config SWIOTLB
bool
+ help
+ Support for software bounce buffers used on x86-64 systems
+ which don't have a hardware IOMMU (e.g. the current generation
+ of Intel's x86-64 CPUs). Using this PCI devices which can only
+ access 32-bits of memory can be used on systems with more than
+ 3 GB of memory. If unsure, say Y.
config X86_MCE
bool "Machine check support" if EMBEDDED
diff --git a/arch/x86_64/kernel/pci-dma.c b/arch/x86_64/kernel/pci-dma.c
index 683b7a5c1ab..651ccfb0669 100644
--- a/arch/x86_64/kernel/pci-dma.c
+++ b/arch/x86_64/kernel/pci-dma.c
@@ -223,30 +223,10 @@ int dma_set_mask(struct device *dev, u64 mask)
}
EXPORT_SYMBOL(dma_set_mask);
-/* iommu=[size][,noagp][,off][,force][,noforce][,leak][,memaper[=order]][,merge]
- [,forcesac][,fullflush][,nomerge][,biomerge]
- size set size of iommu (in bytes)
- noagp don't initialize the AGP driver and use full aperture.
- off don't use the IOMMU
- leak turn on simple iommu leak tracing (only when CONFIG_IOMMU_LEAK is on)
- memaper[=order] allocate an own aperture over RAM with size 32MB^order.
- noforce don't force IOMMU usage. Default.
- force Force IOMMU.
- merge Do lazy merging. This may improve performance on some block devices.
- Implies force (experimental)
- biomerge Do merging at the BIO layer. This is more efficient than merge,
- but should be only done with very big IOMMUs. Implies merge,force.
- nomerge Don't do SG merging.
- forcesac For SAC mode for masks <40bits (experimental)
- fullflush Flush IOMMU on each allocation (default)
- nofullflush Don't use IOMMU fullflush
- allowed overwrite iommu off workarounds for specific chipsets.
- soft Use software bounce buffering (default for Intel machines)
- noaperture Don't touch the aperture for AGP.
- allowdac Allow DMA >4GB
- nodac Forbid DMA >4GB
- panic Force panic when IOMMU overflows
-*/
+/*
+ * See <Documentation/x86_64/boot-options.txt> for the iommu kernel parameter
+ * documentation.
+ */
__init int iommu_setup(char *p)
{
iommu_merge = 1;