diff options
85 files changed, 908 insertions, 645 deletions
diff --git a/Documentation/ABI/testing/sysfs-bus-pci b/Documentation/ABI/testing/sysfs-bus-pci index ceddcff4082..e638e15a889 100644 --- a/Documentation/ABI/testing/sysfs-bus-pci +++ b/Documentation/ABI/testing/sysfs-bus-pci @@ -1,3 +1,46 @@ +What: /sys/bus/pci/drivers/.../bind +Date: December 2003 +Contact: linux-pci@vger.kernel.org +Description: + Writing a device location to this file will cause + the driver to attempt to bind to the device found at + this location. This is useful for overriding default + bindings. The format for the location is: DDDD:BB:DD.F. + That is Domain:Bus:Device.Function and is the same as + found in /sys/bus/pci/devices/. For example: + # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/bind + (Note: kernels before 2.6.28 may require echo -n). + +What: /sys/bus/pci/drivers/.../unbind +Date: December 2003 +Contact: linux-pci@vger.kernel.org +Description: + Writing a device location to this file will cause the + driver to attempt to unbind from the device found at + this location. This may be useful when overriding default + bindings. The format for the location is: DDDD:BB:DD.F. + That is Domain:Bus:Device.Function and is the same as + found in /sys/bus/pci/devices/. For example: + # echo 0000:00:19.0 > /sys/bus/pci/drivers/foo/unbind + (Note: kernels before 2.6.28 may require echo -n). + +What: /sys/bus/pci/drivers/.../new_id +Date: December 2003 +Contact: linux-pci@vger.kernel.org +Description: + Writing a device ID to this file will attempt to + dynamically add a new device ID to a PCI device driver. + This may allow the driver to support more hardware than + was included in the driver's static device ID support + table at compile time. The format for the device ID is: + VVVV DDDD SVVV SDDD CCCC MMMM PPPP. That is Vendor ID, + Device ID, Subsystem Vendor ID, Subsystem Device ID, + Class, Class Mask, and Private Driver Data. The Vendor ID + and Device ID fields are required, the rest are optional. + Upon successfully adding an ID, the driver will probe + for the device and attempt to bind to it. For example: + # echo "8086 10f5" > /sys/bus/pci/drivers/foo/new_id + What: /sys/bus/pci/devices/.../vpd Date: February 2008 Contact: Ben Hutchings <bhutchings@solarflare.com> diff --git a/Documentation/dvb/README.flexcop b/Documentation/dvb/README.flexcop deleted file mode 100644 index 5515469de7c..00000000000 --- a/Documentation/dvb/README.flexcop +++ /dev/null @@ -1,205 +0,0 @@ -This README escorted the skystar2-driver rewriting procedure. It describes the -state of the new flexcop-driver set and some internals are written down here -too. - -This document hopefully describes things about the flexcop and its -device-offsprings. Goal was to write an easy-to-write and easy-to-read set of -drivers based on the skystar2.c and other information. - -Remark: flexcop-pci.c was a copy of skystar2.c, but every line has been -touched and rewritten. - -History & News -============== - 2005-04-01 - correct USB ISOC transfers (thanks to Vadim Catana) - - - - -General coding processing -========================= - -We should proceed as follows (as long as no one complains): - -0) Think before start writing code! - -1) rewriting the skystar2.c with the help of the flexcop register descriptions -and splitting up the files to a pci-bus-part and a flexcop-part. -The new driver will be called b2c2-flexcop-pci.ko/b2c2-flexcop-usb.ko for the -device-specific part and b2c2-flexcop.ko for the common flexcop-functions. - -2) Search for errors in the leftover of flexcop-pci.c (compare with pluto2.c -and other pci drivers) - -3) make some beautification (see 'Improvements when rewriting (refactoring) is -done') - -4) Testing the new driver and maybe substitute the skystar2.c with it, to reach -a wider tester audience. - -5) creating an usb-bus-part using the already written flexcop code for the pci -card. - -Idea: create a kernel-object for the flexcop and export all important -functions. This option saves kernel-memory, but maybe a lot of functions have -to be exported to kernel namespace. - - -Current situation -================= - -0) Done :) -1) Done (some minor issues left) -2) Done -3) Not ready yet, more information is necessary -4) next to be done (see the table below) -5) USB driver is working (yes, there are some minor issues) - -What seems to be ready? ------------------------ - -1) Rewriting -1a) i2c is cut off from the flexcop-pci.c and seems to work -1b) moved tuner and demod stuff from flexcop-pci.c to flexcop-tuner-fe.c -1c) moved lnb and diseqc stuff from flexcop-pci.c to flexcop-tuner-fe.c -1e) eeprom (reading MAC address) -1d) sram (no dynamic sll size detection (commented out) (using default as JJ told me)) -1f) misc. register accesses for reading parameters (e.g. resetting, revision) -1g) pid/mac filter (flexcop-hw-filter.c) -1i) dvb-stuff initialization in flexcop.c (done) -1h) dma stuff (now just using the size-irq, instead of all-together, to be done) -1j) remove flexcop initialization from flexcop-pci.c completely (done) -1l) use a well working dma IRQ method (done, see 'Known bugs and problems and TODO') -1k) cleanup flexcop-files (remove unused EXPORT_SYMBOLs, make static from -non-static where possible, moved code to proper places) - -2) Search for errors in the leftover of flexcop-pci.c (partially done) -5a) add MAC address reading -5c) feeding of ISOC data to the software demux (format of the isochronous data -and speed optimization, no real error) (thanks to Vadim Catana) - -What to do in the near future? --------------------------------------- -(no special order here) - -5) USB driver -5b) optimize isoc-transfer (submitting/killing isoc URBs when transfer is starting) - -Testing changes ---------------- - -O = item is working -P = item is partially working -X = item is not working -N = item does not apply here -<empty field> = item need to be examined - - | PCI | USB -item | mt352 | nxt2002 | stv0299 | mt312 | mt352 | nxt2002 | stv0299 | mt312 --------+-------+---------+---------+-------+-------+---------+---------+------- -1a) | O | | | | N | N | N | N -1b) | O | | | | | | O | -1c) | N | N | | | N | N | O | -1d) | O | O -1e) | O | O -1f) | P -1g) | O -1h) | P | -1i) | O | N -1j) | O | N -1l) | O | N -2) | O | N -5a) | N | O -5b)* | N | -5c) | N | O - -* - not done yet - -Known bugs and problems and TODO --------------------------------- - -1g/h/l) when pid filtering is enabled on the pci card - -DMA usage currently: - The DMA is splitted in 2 equal-sized subbuffers. The Flexcop writes to first - address and triggers an IRQ when it's full and starts writing to the second - address. When the second address is full, the IRQ is triggered again, and - the flexcop writes to first address again, and so on. - The buffersize of each address is currently 640*188 bytes. - - Problem is, when using hw-pid-filtering and doing some low-bandwidth - operation (like scanning) the buffers won't be filled enough to trigger - the IRQ. That's why: - - When PID filtering is activated, the timer IRQ is used. Every 1.97 ms the IRQ - is triggered. Is the current write address of DMA1 different to the one - during the last IRQ, then the data is passed to the demuxer. - - There is an additional DMA-IRQ-method: packet count IRQ. This isn't - implemented correctly yet. - - The solution is to disable HW PID filtering, but I don't know how the DVB - API software demux behaves on slow systems with 45MBit/s TS. - -Solved bugs :) --------------- -1g) pid-filtering (somehow pid index 4 and 5 (EMM_PID and ECM_PID) aren't -working) -SOLUTION: also index 0 was affected, because net_translation is done for -these indexes by default - -5b) isochronous transfer does only work in the first attempt (for the Sky2PC -USB, Air2PC is working) SOLUTION: the flexcop was going asleep and never really -woke up again (don't know if this need fixes, see -flexcop-fe-tuner.c:flexcop_sleep) - -NEWS: when the driver is loaded and unloaded and loaded again (w/o doing -anything in the while the driver is loaded the first time), no transfers take -place anymore. - -Improvements when rewriting (refactoring) is done -================================================= - -- split sleeping of the flexcop (misc_204.ACPI3_sig = 1;) from lnb_control - (enable sleeping for other demods than dvb-s) -- add support for CableStar (stv0297 Microtune 203x/ALPS) (almost done, incompatibilities with the Nexus-CA) - -Debugging ---------- -- add verbose debugging to skystar2.c (dump the reg_dw_data) and compare it - with this flexcop, this is important, because i2c is now using the - flexcop_ibi_value union from flexcop-reg.h (do you have a better idea for - that, please tell us so). - -Everything which is identical in the following table, can be put into a common -flexcop-module. - - PCI USB -------------------------------------------------------------------------------- -Different: -Register access: accessing IO memory USB control message -I2C bus: I2C bus of the FC USB control message -Data transfer: DMA isochronous transfer -EEPROM transfer: through i2c bus not clear yet - -Identical: -Streaming: accessing registers -PID Filtering: accessing registers -Sram destinations: accessing registers -Tuner/Demod: I2C bus -DVB-stuff: can be written for common use - -Acknowledgements (just for the rewriting part) -================ - -Bjarne Steinsbo thought a lot in the first place of the pci part for this code -sharing idea. - -Andreas Oberritter for providing a recent PCI initialization template -(pluto2.c). - -Boleslaw Ciesielski for pointing out a problem with firmware loader. - -Vadim Catana for correcting the USB transfer. - -comments, critics and ideas to linux-dvb@linuxtv.org. diff --git a/Documentation/dvb/technisat.txt b/Documentation/dvb/technisat.txt index cdf6ee4b2da..3f435ffb289 100644 --- a/Documentation/dvb/technisat.txt +++ b/Documentation/dvb/technisat.txt @@ -1,5 +1,5 @@ -How to set up the Technisat devices -=================================== +How to set up the Technisat/B2C2 Flexcop devices +================================================ 1) Find out what device you have ================================ @@ -16,54 +16,60 @@ DVB: registering frontend 0 (Conexant CX24123/CX24109)... If the Technisat is the only TV device in your box get rid of unnecessary modules and check this one: "Multimedia devices" => "Customise analog and hybrid tuner modules to build" -In this directory uncheck every driver which is activated there. +In this directory uncheck every driver which is activated there (except "Simple tuner support" for case 9 only). Then please activate: 2a) Main module part: a.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" -b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card OR +b.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC PCI" in case of a PCI card +OR c.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Technisat/B2C2 Air/Sky/Cable2PC USB" in case of an USB 1.1 adapter d.)"Multimedia devices" => "DVB/ATSC adapters" => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" => "Enable debug for the B2C2 FlexCop drivers" Notice: d.) is helpful for troubleshooting 2b) Frontend module part: -1.) Revision 2.3: +1.) SkyStar DVB-S Revision 2.3: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink VP310/MT312/ZL10313 based" -2.) Revision 2.6: +2.) SkyStar DVB-S Revision 2.6: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0299 based" -3.) Revision 2.7: +3.) SkyStar DVB-S Revision 2.7: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Samsung S5H1420 based" c.)"Multimedia devices" => "Customise DVB frontends" => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS" d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller" -4.) Revision 2.8: +4.) SkyStar DVB-S Revision 2.8: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24113/CX24128 tuner for DVB-S/DSS" c.)"Multimedia devices" => "Customise DVB frontends" => "Conexant CX24123 based" d.)"Multimedia devices" => "Customise DVB frontends" => "ISL6421 SEC controller" -5.) DVB-T card: +5.) AirStar DVB-T card: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Zarlink MT352 based" -6.) DVB-C card: +6.) CableStar DVB-C card: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "ST STV0297 based" -7.) ATSC card 1st generation: +7.) AirStar ATSC card 1st generation: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "Broadcom BCM3510" -8.) ATSC card 2nd generation: +8.) AirStar ATSC card 2nd generation: a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" b.)"Multimedia devices" => "Customise DVB frontends" => "NxtWave Communications NXT2002/NXT2004 based" -c.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based" +c.)"Multimedia devices" => "Customise DVB frontends" => "Generic I2C PLL based tuners" -Author: Uwe Bugla <uwe.bugla@gmx.de> December 2008 +9.) AirStar ATSC card 3rd generation: +a.)"Multimedia devices" => "Customise DVB frontends" => "Customise the frontend modules to build" +b.)"Multimedia devices" => "Customise DVB frontends" => "LG Electronics LGDT3302/LGDT3303 based" +c.)"Multimedia devices" => "Customise analog and hybrid tuner modules to build" => "Simple tuner support" + +Author: Uwe Bugla <uwe.bugla@gmx.de> February 2009 diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 0ed3234125e..54f21a5c262 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -114,7 +114,7 @@ In addition, the following text indicates that the option: Parameters denoted with BOOT are actually interpreted by the boot loader, and have no meaning to the kernel directly. Do not modify the syntax of boot loader parameters without extreme -need or coordination with <Documentation/x86/i386/boot.txt>. +need or coordination with <Documentation/x86/boot.txt>. There are also arch-specific kernel-parameters not documented here. See for example <Documentation/x86/x86_64/boot-options.txt>. @@ -2451,7 +2451,7 @@ and is between 256 and 4096 characters. It is defined in the file See Documentation/fb/modedb.txt. vga= [BOOT,X86-32] Select a particular video mode - See Documentation/x86/i386/boot.txt and + See Documentation/x86/boot.txt and Documentation/svga.txt. Use vga=ask for menu. This is actually a boot loader parameter; the value is diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-evm.c index a957d239a68..38b6a9ce2a9 100644 --- a/arch/arm/mach-davinci/board-evm.c +++ b/arch/arm/mach-davinci/board-evm.c @@ -311,6 +311,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c) gpio_request(gpio + 7, "nCF_SEL"); gpio_direction_output(gpio + 7, 1); + /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ + setup_usb(500, 8); + return 0; } @@ -417,9 +420,6 @@ static __init void davinci_evm_init(void) platform_add_devices(davinci_evm_devices, ARRAY_SIZE(davinci_evm_devices)); evm_init_i2c(); - - /* irlml6401 sustains over 3A, switches 5V in under 8 msec */ - setup_usb(500, 8); } static __init void davinci_evm_irq_init(void) diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c index 28f6dbc95bd..abb92b7eca0 100644 --- a/arch/arm/mach-davinci/clock.c +++ b/arch/arm/mach-davinci/clock.c @@ -231,6 +231,11 @@ static struct clk davinci_clks[] = { .lpsc = DAVINCI_LPSC_GPIO, }, { + .name = "usb", + .rate = &commonrate, + .lpsc = DAVINCI_LPSC_USB, + }, + { .name = "AEMIFCLK", .rate = &commonrate, .lpsc = DAVINCI_LPSC_AEMIF, diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c index 867ead2559a..69680784448 100644 --- a/arch/arm/mach-davinci/usb.c +++ b/arch/arm/mach-davinci/usb.c @@ -47,6 +47,7 @@ static struct musb_hdrc_platform_data usb_data = { #elif defined(CONFIG_USB_MUSB_HOST) .mode = MUSB_HOST, #endif + .clock = "usb", .config = &musb_config, }; diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index 600eef3f3ac..e61465a18c7 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -603,7 +603,7 @@ config CAVIUM_OCTEON_SIMULATOR select SYS_SUPPORTS_64BIT_KERNEL select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM - select CPU_CAVIUM_OCTEON + select SYS_HAS_CPU_CAVIUM_OCTEON help The Octeon simulator is software performance model of the Cavium Octeon Processor. It supports simulating Octeon processors on x86 @@ -618,7 +618,7 @@ config CAVIUM_OCTEON_REFERENCE_BOARD select SYS_SUPPORTS_BIG_ENDIAN select SYS_SUPPORTS_HIGHMEM select SYS_HAS_EARLY_PRINTK - select CPU_CAVIUM_OCTEON + select SYS_HAS_CPU_CAVIUM_OCTEON select SWAP_IO_SPACE help This option supports all of the Octeon reference boards from Cavium @@ -1234,6 +1234,7 @@ config CPU_SB1 config CPU_CAVIUM_OCTEON bool "Cavium Octeon processor" + depends on SYS_HAS_CPU_CAVIUM_OCTEON select IRQ_CPU select IRQ_CPU_OCTEON select CPU_HAS_PREFETCH @@ -1314,6 +1315,9 @@ config SYS_HAS_CPU_RM9000 config SYS_HAS_CPU_SB1 bool +config SYS_HAS_CPU_CAVIUM_OCTEON + bool + # # CPU may reorder R->R, R->W, W->R, W->W # Reordering beyond LL and SC is handled in WEAK_REORDERING_BEYOND_LLSC @@ -1387,6 +1391,7 @@ config 32BIT config 64BIT bool "64-bit kernel" depends on CPU_SUPPORTS_64BIT_KERNEL && SYS_SUPPORTS_64BIT_KERNEL + select HAVE_SYSCALL_WRAPPERS help Select this option if you want to build a 64-bit kernel. diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c index 6fd441d16af..f58d4ffb894 100644 --- a/arch/mips/alchemy/common/time.c +++ b/arch/mips/alchemy/common/time.c @@ -118,7 +118,7 @@ void __init plat_time_init(void) * setup counter 1 (RTC) to tick at full speed */ t = 0xffffff; - while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && t--) + while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_T1S) && --t) asm volatile ("nop"); if (!t) goto cntr_err; @@ -127,7 +127,7 @@ void __init plat_time_init(void) au_sync(); t = 0xffffff; - while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--) + while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t) asm volatile ("nop"); if (!t) goto cntr_err; @@ -135,7 +135,7 @@ void __init plat_time_init(void) au_sync(); t = 0xffffff; - while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && t--) + while ((au_readl(SYS_COUNTER_CNTRL) & SYS_CNTRL_C1S) && --t) asm volatile ("nop"); if (!t) goto cntr_err; diff --git a/arch/mips/kernel/irq.c b/arch/mips/kernel/irq.c index a0ff2b66e22..4b4007b3083 100644 --- a/arch/mips/kernel/irq.c +++ b/arch/mips/kernel/irq.c @@ -111,7 +111,6 @@ int show_interrupts(struct seq_file *p, void *v) seq_printf(p, "%10u ", kstat_cpu(j).irqs[i]); #endif seq_printf(p, " %14s", irq_desc[i].chip->name); - seq_printf(p, "-%-8s", irq_desc[i].name); seq_printf(p, " %s", action->name); for (action=action->next; action; action = action->next) diff --git a/arch/mips/kernel/linux32.c b/arch/mips/kernel/linux32.c index aa2c55e3b55..2f8452b404c 100644 --- a/arch/mips/kernel/linux32.c +++ b/arch/mips/kernel/linux32.c @@ -32,6 +32,7 @@ #include <linux/module.h> #include <linux/binfmts.h> #include <linux/security.h> +#include <linux/syscalls.h> #include <linux/compat.h> #include <linux/vfs.h> #include <linux/ipc.h> @@ -63,9 +64,9 @@ #define merge_64(r1, r2) ((((r2) & 0xffffffffUL) << 32) + ((r1) & 0xffffffffUL)) #endif -asmlinkage unsigned long -sys32_mmap2(unsigned long addr, unsigned long len, unsigned long prot, - unsigned long flags, unsigned long fd, unsigned long pgoff) +SYSCALL_DEFINE6(32_mmap2, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, unsigned long, fd, + unsigned long, pgoff) { struct file * file = NULL; unsigned long error; @@ -121,21 +122,21 @@ struct rlimit32 { int rlim_max; }; -asmlinkage long sys32_truncate64(const char __user * path, - unsigned long __dummy, int a2, int a3) +SYSCALL_DEFINE4(32_truncate64, const char __user *, path, + unsigned long, __dummy, unsigned long, a2, unsigned long, a3) { return sys_truncate(path, merge_64(a2, a3)); } -asmlinkage long sys32_ftruncate64(unsigned int fd, unsigned long __dummy, - int a2, int a3) +SYSCALL_DEFINE4(32_ftruncate64, unsigned long, fd, unsigned long, __dummy, + unsigned long, a2, unsigned long, a3) { return sys_ftruncate(fd, merge_64(a2, a3)); } -asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high, - unsigned int offset_low, loff_t __user * result, - unsigned int origin) +SYSCALL_DEFINE5(32_llseek, unsigned long, fd, unsigned long, offset_high, + unsigned long, offset_low, loff_t __user *, result, + unsigned long, origin) { return sys_llseek(fd, offset_high, offset_low, result, origin); } @@ -144,20 +145,20 @@ asmlinkage int sys32_llseek(unsigned int fd, unsigned int offset_high, lseek back to original location. They fail just like lseek does on non-seekable files. */ -asmlinkage ssize_t sys32_pread(unsigned int fd, char __user * buf, - size_t count, u32 unused, u64 a4, u64 a5) +SYSCALL_DEFINE6(32_pread, unsigned long, fd, char __user *, buf, size_t, count, + unsigned long, unused, unsigned long, a4, unsigned long, a5) { return sys_pread64(fd, buf, count, merge_64(a4, a5)); } -asmlinkage ssize_t sys32_pwrite(unsigned int fd, const char __user * buf, - size_t count, u32 unused, u64 a4, u64 a5) +SYSCALL_DEFINE6(32_pwrite, unsigned int, fd, const char __user *, buf, + size_t, count, u32, unused, u64, a4, u64, a5) { return sys_pwrite64(fd, buf, count, merge_64(a4, a5)); } -asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid, - struct compat_timespec __user *interval) +SYSCALL_DEFINE2(32_sched_rr_get_interval, compat_pid_t, pid, + struct compat_timespec __user *, interval) { struct timespec t; int ret; @@ -174,8 +175,8 @@ asmlinkage int sys32_sched_rr_get_interval(compat_pid_t pid, #ifdef CONFIG_SYSVIPC -asmlinkage long -sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth) +SYSCALL_DEFINE6(32_ipc, u32, call, long, first, long, second, long, third, + unsigned long, ptr, unsigned long, fifth) { int version, err; @@ -233,8 +234,8 @@ sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth) #else -asmlinkage long -sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth) +SYSCALL_DEFINE6(32_ipc, u32, call, int, first, int, second, int, third, + u32, ptr, u32 fifth) { return -ENOSYS; } @@ -242,7 +243,7 @@ sys32_ipc(u32 call, int first, int second, int third, u32 ptr, u32 fifth) #endif /* CONFIG_SYSVIPC */ #ifdef CONFIG_MIPS32_N32 -asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, u32 arg) +SYSCALL_DEFINE4(n32_semctl, int, semid, int, semnum, int, cmd, u32, arg) { /* compat_sys_semctl expects a pointer to union semun */ u32 __user *uptr = compat_alloc_user_space(sizeof(u32)); @@ -251,13 +252,14 @@ asmlinkage long sysn32_semctl(int semid, int semnum, int cmd, u32 arg) return compat_sys_semctl(semid, semnum, cmd, uptr); } -asmlinkage long sysn32_msgsnd(int msqid, u32 msgp, unsigned msgsz, int msgflg) +SYSCALL_DEFINE4(n32_msgsnd, int, msqid, u32, msgp, unsigned int, msgsz, + int, msgflg) { return compat_sys_msgsnd(msqid, msgsz, msgflg, compat_ptr(msgp)); } -asmlinkage long sysn32_msgrcv(int msqid, u32 msgp, size_t msgsz, int msgtyp, - int msgflg) +SYSCALL_DEFINE5(n32_msgrcv, int, msqid, u32, msgp, size_t, msgsz, + int, msgtyp, int, msgflg) { return compat_sys_msgrcv(msqid, msgsz, msgtyp, msgflg, IPC_64, compat_ptr(msgp)); @@ -277,7 +279,7 @@ struct sysctl_args32 #ifdef CONFIG_SYSCTL_SYSCALL -asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args) +SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args) { struct sysctl_args32 tmp; int error; @@ -316,9 +318,16 @@ asmlinkage long sys32_sysctl(struct sysctl_args32 __user *args) return error; } +#else + +SYSCALL_DEFINE1(32_sysctl, struct sysctl_args32 __user *, args) +{ + return -ENOSYS; +} + #endif /* CONFIG_SYSCTL_SYSCALL */ -asmlinkage long sys32_newuname(struct new_utsname __user * name) +SYSCALL_DEFINE1(32_newuname, struct new_utsname __user *, name) { int ret = 0; @@ -334,7 +343,7 @@ asmlinkage long sys32_newuname(struct new_utsname __user * name) return ret; } -asmlinkage int sys32_personality(unsigned long personality) +SYSCALL_DEFINE1(32_personality, unsigned long, personality) { int ret; personality &= 0xffffffff; @@ -357,7 +366,7 @@ struct ustat32 { extern asmlinkage long sys_ustat(dev_t dev, struct ustat __user * ubuf); -asmlinkage int sys32_ustat(dev_t dev, struct ustat32 __user * ubuf32) +SYSCALL_DEFINE2(32_ustat, dev_t, dev, struct ustat32 __user *, ubuf32) { int err; struct ustat tmp; @@ -381,8 +390,8 @@ out: return err; } -asmlinkage int sys32_sendfile(int out_fd, int in_fd, compat_off_t __user *offset, - s32 count) +SYSCALL_DEFINE4(32_sendfile, long, out_fd, long, in_fd, + compat_off_t __user *, offset, s32, count) { mm_segment_t old_fs = get_fs(); int ret; diff --git a/arch/mips/kernel/scall32-o32.S b/arch/mips/kernel/scall32-o32.S index 51d1ba415b9..9ab70c3b5be 100644 --- a/arch/mips/kernel/scall32-o32.S +++ b/arch/mips/kernel/scall32-o32.S @@ -399,7 +399,7 @@ einval: li v0, -ENOSYS sys sys_swapon 2 sys sys_reboot 3 sys sys_old_readdir 3 - sys old_mmap 6 /* 4090 */ + sys sys_mips_mmap 6 /* 4090 */ sys sys_munmap 2 sys sys_truncate 2 sys sys_ftruncate 2 @@ -519,7 +519,7 @@ einval: li v0, -ENOSYS sys sys_sendfile 4 sys sys_ni_syscall 0 sys sys_ni_syscall 0 - sys sys_mmap2 6 /* 4210 */ + sys sys_mips_mmap2 6 /* 4210 */ sys sys_truncate64 4 sys sys_ftruncate64 4 sys sys_stat64 2 diff --git a/arch/mips/kernel/scall64-64.S b/arch/mips/kernel/scall64-64.S index a9e17161899..9b469866715 100644 --- a/arch/mips/kernel/scall64-64.S +++ b/arch/mips/kernel/scall64-64.S @@ -207,7 +207,7 @@ sys_call_table: PTR sys_newlstat PTR sys_poll PTR sys_lseek - PTR old_mmap + PTR sys_mips_mmap PTR sys_mprotect /* 5010 */ PTR sys_munmap PTR sys_brk diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S index 30f3b6317a8..7438e92f8a0 100644 --- a/arch/mips/kernel/scall64-n32.S +++ b/arch/mips/kernel/scall64-n32.S @@ -129,12 +129,12 @@ EXPORT(sysn32_call_table) PTR sys_newlstat PTR sys_poll PTR sys_lseek - PTR old_mmap + PTR sys_mips_mmap PTR sys_mprotect /* 6010 */ PTR sys_munmap PTR sys_brk - PTR sys32_rt_sigaction - PTR sys32_rt_sigprocmask + PTR sys_32_rt_sigaction + PTR sys_32_rt_sigprocmask PTR compat_sys_ioctl /* 6015 */ PTR sys_pread64 PTR sys_pwrite64 @@ -159,7 +159,7 @@ EXPORT(sysn32_call_table) PTR compat_sys_setitimer PTR sys_alarm PTR sys_getpid - PTR sys32_sendfile + PTR sys_32_sendfile PTR sys_socket /* 6040 */ PTR sys_connect PTR sys_accept @@ -181,14 +181,14 @@ EXPORT(sysn32_call_table) PTR sys_exit PTR compat_sys_wait4 PTR sys_kill /* 6060 */ - PTR sys32_newuname + PTR sys_32_newuname PTR sys_semget PTR sys_semop - PTR sysn32_semctl + PTR sys_n32_semctl PTR sys_shmdt /* 6065 */ PTR sys_msgget - PTR sysn32_msgsnd - PTR sysn32_msgrcv + PTR sys_n32_msgsnd + PTR sys_n32_msgrcv PTR compat_sys_msgctl PTR compat_sys_fcntl /* 6070 */ PTR sys_flock @@ -245,15 +245,15 @@ EXPORT(sysn32_call_table) PTR sys_getsid PTR sys_capget PTR sys_capset - PTR sys32_rt_sigpending /* 6125 */ + PTR sys_32_rt_sigpending /* 6125 */ PTR compat_sys_rt_sigtimedwait - PTR sys32_rt_sigqueueinfo + PTR sys_32_rt_sigqueueinfo PTR sysn32_rt_sigsuspend PTR sys32_sigaltstack PTR compat_sys_utime /* 6130 */ PTR sys_mknod - PTR sys32_personality - PTR sys32_ustat + PTR sys_32_personality + PTR sys_32_ustat PTR compat_sys_statfs PTR compat_sys_fstatfs /* 6135 */ PTR sys_sysfs @@ -265,14 +265,14 @@ EXPORT(sysn32_call_table) PTR sys_sched_getscheduler PTR sys_sched_get_priority_max PTR sys_sched_get_priority_min - PTR sys32_sched_rr_get_interval /* 6145 */ + PTR sys_32_sched_rr_get_interval /* 6145 */ PTR sys_mlock PTR sys_munlock PTR sys_mlockall PTR sys_munlockall PTR sys_vhangup /* 6150 */ PTR sys_pivot_root - PTR sys32_sysctl + PTR sys_32_sysctl PTR sys_prctl PTR compat_sys_adjtimex PTR compat_sys_setrlimit /* 6155 */ diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S index fefef4af859..b0fef4ff982 100644 --- a/arch/mips/kernel/scall64-o32.S +++ b/arch/mips/kernel/scall64-o32.S @@ -265,12 +265,12 @@ sys_call_table: PTR sys_olduname PTR sys_umask /* 4060 */ PTR sys_chroot - PTR sys32_ustat + PTR sys_32_ustat PTR sys_dup2 PTR sys_getppid PTR sys_getpgrp /* 4065 */ PTR sys_setsid - PTR sys32_sigaction + PTR sys_32_sigaction PTR sys_sgetmask PTR sys_ssetmask PTR sys_setreuid /* 4070 */ @@ -293,7 +293,7 @@ sys_call_table: PTR sys_swapon PTR sys_reboot PTR compat_sys_old_readdir - PTR old_mmap /* 4090 */ + PTR sys_mips_mmap /* 4090 */ PTR sys_munmap PTR sys_truncate PTR sys_ftruncate @@ -320,12 +320,12 @@ sys_call_table: PTR compat_sys_wait4 PTR sys_swapoff /* 4115 */ PTR compat_sys_sysinfo - PTR sys32_ipc + PTR sys_32_ipc PTR sys_fsync PTR sys32_sigreturn PTR sys32_clone /* 4120 */ PTR sys_setdomainname - PTR sys32_newuname + PTR sys_32_newuname PTR sys_ni_syscall /* sys_modify_ldt */ PTR compat_sys_adjtimex PTR sys_mprotect /* 4125 */ @@ -339,11 +339,11 @@ sys_call_table: PTR sys_fchdir PTR sys_bdflush PTR sys_sysfs /* 4135 */ - PTR sys32_personality + PTR sys_32_personality PTR sys_ni_syscall /* for afs_syscall */ PTR sys_setfsuid PTR sys_setfsgid - PTR sys32_llseek /* 4140 */ + PTR sys_32_llseek /* 4140 */ PTR compat_sys_getdents PTR compat_sys_select PTR sys_flock @@ -356,7 +356,7 @@ sys_call_table: PTR sys_ni_syscall /* 4150 */ PTR sys_getsid PTR sys_fdatasync - PTR sys32_sysctl + PTR sys_32_sysctl PTR sys_mlock PTR sys_munlock /* 4155 */ PTR sys_mlockall @@ -368,7 +368,7 @@ sys_call_table: PTR sys_sched_yield PTR sys_sched_get_priority_max PTR sys_sched_get_priority_min - PTR sys32_sched_rr_get_interval /* 4165 */ + PTR sys_32_sched_rr_get_interval /* 4165 */ PTR compat_sys_nanosleep PTR sys_mremap PTR sys_accept @@ -397,25 +397,25 @@ sys_call_table: PTR sys_getresgid PTR sys_prctl PTR sys32_rt_sigreturn - PTR sys32_rt_sigaction - PTR sys32_rt_sigprocmask /* 4195 */ - PTR sys32_rt_sigpending + PTR sys_32_rt_sigaction + PTR sys_32_rt_sigprocmask /* 4195 */ + PTR sys_32_rt_sigpending PTR compat_sys_rt_sigtimedwait - PTR sys32_rt_sigqueueinfo + PTR sys_32_rt_sigqueueinfo PTR sys32_rt_sigsuspend - PTR sys32_pread /* 4200 */ - PTR sys32_pwrite + PTR sys_32_pread /* 4200 */ + PTR sys_32_pwrite PTR sys_chown PTR sys_getcwd PTR sys_capget PTR sys_capset /* 4205 */ PTR sys32_sigaltstack - PTR sys32_sendfile + PTR sys_32_sendfile PTR sys_ni_syscall PTR sys_ni_syscall - PTR sys32_mmap2 /* 4210 */ - PTR sys32_truncate64 - PTR sys32_ftruncate64 + PTR sys_mips_mmap2 /* 4210 */ + PTR sys_32_truncate64 + PTR sys_32_ftruncate64 PTR sys_newstat PTR sys_newlstat PTR sys_newfstat /* 4215 */ @@ -481,7 +481,7 @@ sys_call_table: PTR compat_sys_mq_notify /* 4275 */ PTR compat_sys_mq_getsetattr PTR sys_ni_syscall /* sys_vserver */ - PTR sys32_waitid + PTR sys_32_waitid PTR sys_ni_syscall /* available, was setaltroot */ PTR sys_add_key /* 4280 */ PTR sys_request_key diff --git a/arch/mips/kernel/signal.c b/arch/mips/kernel/signal.c index a4e106c56ab..830c5ef9932 100644 --- a/arch/mips/kernel/signal.c +++ b/arch/mips/kernel/signal.c @@ -19,6 +19,7 @@ #include <linux/ptrace.h> #include <linux/unistd.h> #include <linux/compiler.h> +#include <linux/syscalls.h> #include <linux/uaccess.h> #include <asm/abi.h> @@ -338,8 +339,8 @@ asmlinkage int sys_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) } #ifdef CONFIG_TRAD_SIGNALS -asmlinkage int sys_sigaction(int sig, const struct sigaction __user *act, - struct sigaction __user *oact) +SYSCALL_DEFINE3(sigaction, int, sig, const struct sigaction __user *, act, + struct sigaction __user *, oact) { struct k_sigaction new_ka, old_ka; int ret; diff --git a/arch/mips/kernel/signal32.c b/arch/mips/kernel/signal32.c index 652709b353a..2e74075ac0c 100644 --- a/arch/mips/kernel/signal32.c +++ b/arch/mips/kernel/signal32.c @@ -349,8 +349,8 @@ asmlinkage int sys32_rt_sigsuspend(nabi_no_regargs struct pt_regs regs) return -ERESTARTNOHAND; } -asmlinkage int sys32_sigaction(int sig, const struct sigaction32 __user *act, - struct sigaction32 __user *oact) +SYSCALL_DEFINE3(32_sigaction, long, sig, const struct sigaction32 __user *, act, + struct sigaction32 __user *, oact) { struct k_sigaction new_ka, old_ka; int ret; @@ -704,9 +704,9 @@ struct mips_abi mips_abi_32 = { .restart = __NR_O32_restart_syscall }; -asmlinkage int sys32_rt_sigaction(int sig, const struct sigaction32 __user *act, - struct sigaction32 __user *oact, - unsigned int sigsetsize) +SYSCALL_DEFINE4(32_rt_sigaction, int, sig, + const struct sigaction32 __user *, act, + struct sigaction32 __user *, oact, unsigned int, sigsetsize) { struct k_sigaction new_sa, old_sa; int ret = -EINVAL; @@ -748,8 +748,8 @@ out: return ret; } -asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set, - compat_sigset_t __user *oset, unsigned int sigsetsize) +SYSCALL_DEFINE4(32_rt_sigprocmask, int, how, compat_sigset_t __user *, set, + compat_sigset_t __user *, oset, unsigned int, sigsetsize) { sigset_t old_set, new_set; int ret; @@ -770,8 +770,8 @@ asmlinkage int sys32_rt_sigprocmask(int how, compat_sigset_t __user *set, return ret; } -asmlinkage int sys32_rt_sigpending(compat_sigset_t __user *uset, - unsigned int sigsetsize) +SYSCALL_DEFINE2(32_rt_sigpending, compat_sigset_t __user *, uset, + unsigned int, sigsetsize) { int ret; sigset_t set; @@ -787,7 +787,8 @@ asmlinkage int sys32_rt_sigpending(compat_sigset_t __user *uset, return ret; } -asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user *uinfo) +SYSCALL_DEFINE3(32_rt_sigqueueinfo, int, pid, int, sig, + compat_siginfo_t __user *, uinfo) { siginfo_t info; int ret; @@ -802,10 +803,9 @@ asmlinkage int sys32_rt_sigqueueinfo(int pid, int sig, compat_siginfo_t __user * return ret; } -asmlinkage long -sys32_waitid(int which, compat_pid_t pid, - compat_siginfo_t __user *uinfo, int options, - struct compat_rusage __user *uru) +SYSCALL_DEFINE5(32_waitid, int, which, compat_pid_t, pid, + compat_siginfo_t __user *, uinfo, int, options, + struct compat_rusage __user *, uru) { siginfo_t info; struct rusage ru; diff --git a/arch/mips/kernel/syscall.c b/arch/mips/kernel/syscall.c index 37970d9b218..8cf38464404 100644 --- a/arch/mips/kernel/syscall.c +++ b/arch/mips/kernel/syscall.c @@ -152,9 +152,9 @@ out: return error; } -asmlinkage unsigned long -old_mmap(unsigned long addr, unsigned long len, int prot, - int flags, int fd, off_t offset) +SYSCALL_DEFINE6(mips_mmap, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, unsigned long, + fd, off_t, offset) { unsigned long result; @@ -168,9 +168,9 @@ out: return result; } -asmlinkage unsigned long -sys_mmap2(unsigned long addr, unsigned long len, unsigned long prot, - unsigned long flags, unsigned long fd, unsigned long pgoff) +SYSCALL_DEFINE6(mips_mmap2, unsigned long, addr, unsigned long, len, + unsigned long, prot, unsigned long, flags, unsigned long, fd, + unsigned long, pgoff) { if (pgoff & (~PAGE_MASK >> 12)) return -EINVAL; @@ -240,7 +240,7 @@ out: /* * Compacrapability ... */ -asmlinkage int sys_uname(struct old_utsname __user * name) +SYSCALL_DEFINE1(uname, struct old_utsname __user *, name) { if (name && !copy_to_user(name, utsname(), sizeof (*name))) return 0; @@ -250,7 +250,7 @@ asmlinkage int sys_uname(struct old_utsname __user * name) /* * Compacrapability ... */ -asmlinkage int sys_olduname(struct oldold_utsname __user * name) +SYSCALL_DEFINE1(olduname, struct oldold_utsname __user *, name) { int error; @@ -279,7 +279,7 @@ asmlinkage int sys_olduname(struct oldold_utsname __user * name) return error; } -asmlinkage int sys_set_thread_area(unsigned long addr) +SYSCALL_DEFINE1(set_thread_area, unsigned long, addr) { struct thread_info *ti = task_thread_info(current); @@ -290,7 +290,7 @@ asmlinkage int sys_set_thread_area(unsigned long addr) return 0; } -asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3) +asmlinkage int _sys_sysmips(long cmd, long arg1, long arg2, long arg3) { switch (cmd) { case MIPS_ATOMIC_SET: @@ -325,8 +325,8 @@ asmlinkage int _sys_sysmips(int cmd, long arg1, int arg2, int arg3) * * This is really horribly ugly. */ -asmlinkage int sys_ipc(unsigned int call, int first, int second, - unsigned long third, void __user *ptr, long fifth) +SYSCALL_DEFINE6(ipc, unsigned int, call, int, first, int, second, + unsigned long, third, void __user *, ptr, long, fifth) { int version, ret; @@ -411,7 +411,7 @@ asmlinkage int sys_ipc(unsigned int call, int first, int second, /* * No implemented yet ... */ -asmlinkage int sys_cachectl(char *addr, int nbytes, int op) +SYSCALL_DEFINE3(cachectl, char *, addr, int, nbytes, int, op) { return -ENOSYS; } diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index 98ad0a82c29..694d51f523d 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -13,6 +13,7 @@ #include <linux/linkage.h> #include <linux/module.h> #include <linux/sched.h> +#include <linux/syscalls.h> #include <linux/mm.h> #include <asm/cacheflush.h> @@ -58,8 +59,8 @@ EXPORT_SYMBOL(_dma_cache_wback_inv); * We could optimize the case where the cache argument is not BCACHE but * that seems very atypical use ... */ -asmlinkage int sys_cacheflush(unsigned long addr, - unsigned long bytes, unsigned int cache) +SYSCALL_DEFINE3(cacheflush, unsigned long, addr, unsigned long, bytes, + unsigned int, cache) { if (bytes == 0) return 0; diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c index 77fae5f64f2..5558d932b4d 100644 --- a/arch/powerpc/sysdev/ppc4xx_pci.c +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -204,6 +204,23 @@ static int __init ppc4xx_setup_one_pci_PMM(struct pci_controller *hose, { u32 ma, pcila, pciha; + /* Hack warning ! The "old" PCI 2.x cell only let us configure the low + * 32-bit of incoming PLB addresses. The top 4 bits of the 36-bit + * address are actually hard wired to a value that appears to depend + * on the specific SoC. For example, it's 0 on 440EP and 1 on 440EPx. + * + * The trick here is we just crop those top bits and ignore them when + * programming the chip. That means the device-tree has to be right + * for the specific part used (we don't print a warning if it's wrong + * but on the other hand, you'll crash quickly enough), but at least + * this code should work whatever the hard coded value is + */ + plb_addr &= 0xffffffffull; + + /* Note: Due to the above hack, the test below doesn't actually test + * if you address is above 4G, but it tests that address and + * (address + size) are both contained in the same 4G + */ if ((plb_addr + size) > 0xffffffffull || !is_power_of_2(size) || size < 0x1000 || (plb_addr & (size - 1)) != 0) { printk(KERN_WARNING "%s: Resource out of range\n", diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c index 7c35787d29b..72da416f616 100644 --- a/arch/sh/boards/board-ap325rxa.c +++ b/arch/sh/boards/board-ap325rxa.c @@ -22,7 +22,6 @@ #include <linux/gpio.h> #include <linux/spi/spi.h> #include <linux/spi/spi_gpio.h> -#include <media/ov772x.h> #include <media/soc_camera_platform.h> #include <media/sh_mobile_ceu.h> #include <video/sh_mobile_lcdc.h> @@ -224,7 +223,6 @@ static void camera_power(int val) } #ifdef CONFIG_I2C -/* support for the old ncm03j camera */ static unsigned char camera_ncm03j_magic[] = { 0x87, 0x00, 0x88, 0x08, 0x89, 0x01, 0x8A, 0xE8, @@ -245,23 +243,6 @@ static unsigned char camera_ncm03j_magic[] = 0x63, 0xD4, 0x64, 0xEA, 0xD6, 0x0F, }; -static int camera_probe(void) -{ - struct i2c_adapter *a = i2c_get_adapter(0); - struct i2c_msg msg; - int ret; - - camera_power(1); - msg.addr = 0x6e; - msg.buf = camera_ncm03j_magic; - msg.len = 2; - msg.flags = 0; - ret = i2c_transfer(a, &msg, 1); - camera_power(0); - - return ret; -} - static int camera_set_capture(struct soc_camera_platform_info *info, int enable) { @@ -313,35 +294,8 @@ static struct platform_device camera_device = { .platform_data = &camera_info, }, }; - -static int __init camera_setup(void) -{ - if (camera_probe() > 0) - platform_device_register(&camera_device); - - return 0; -} -late_initcall(camera_setup); - #endif /* CONFIG_I2C */ -static int ov7725_power(struct device *dev, int mode) -{ - camera_power(0); - if (mode) - camera_power(1); - - return 0; -} - -static struct ov772x_camera_info ov7725_info = { - .buswidth = SOCAM_DATAWIDTH_8, - .flags = OV772X_FLAG_VFLIP | OV772X_FLAG_HFLIP, - .link = { - .power = ov7725_power, - }, -}; - static struct sh_mobile_ceu_info sh_mobile_ceu_info = { .flags = SOCAM_PCLK_SAMPLE_RISING | SOCAM_HSYNC_ACTIVE_HIGH | SOCAM_VSYNC_ACTIVE_HIGH | SOCAM_MASTER | SOCAM_DATAWIDTH_8, @@ -392,6 +346,9 @@ static struct platform_device *ap325rxa_devices[] __initdata = { &ap325rxa_nor_flash_device, &lcdc_device, &ceu_device, +#ifdef CONFIG_I2C + &camera_device, +#endif &nand_flash_device, &sdcard_cn3_device, }; @@ -400,10 +357,6 @@ static struct i2c_board_info __initdata ap325rxa_i2c_devices[] = { { I2C_BOARD_INFO("pcf8563", 0x51), }, - { - I2C_BOARD_INFO("ov772x", 0x21), - .platform_data = &ov7725_info, - }, }; static struct spi_board_info ap325rxa_spi_devices[] = { diff --git a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c index 020a96fe961..4a5e5973233 100644 --- a/arch/sh/kernel/cpu/sh2a/clock-sh7201.c +++ b/arch/sh/kernel/cpu/sh2a/clock-sh7201.c @@ -18,8 +18,8 @@ #include <asm/freq.h> #include <asm/io.h> -const static int pll1rate[]={1,2,3,4,6,8}; -const static int pfc_divisors[]={1,2,3,4,6,8,12}; +static const int pll1rate[]={1,2,3,4,6,8}; +static const int pfc_divisors[]={1,2,3,4,6,8,12}; #define ifc_divisors pfc_divisors #if (CONFIG_SH_CLK_MD == 0) diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig index 9c39095b33f..bc2fbadff9f 100644 --- a/arch/x86/Kconfig +++ b/arch/x86/Kconfig @@ -1803,7 +1803,7 @@ config DMAR remapping devices. config DMAR_DEFAULT_ON - def_bool n + def_bool y prompt "Enable DMA Remapping Devices by default" depends on DMAR help diff --git a/arch/x86/include/asm/iomap.h b/arch/x86/include/asm/iomap.h index c1f06289b14..86af26091d6 100644 --- a/arch/x86/include/asm/iomap.h +++ b/arch/x86/include/asm/iomap.h @@ -23,6 +23,9 @@ #include <asm/pgtable.h> #include <asm/tlbflush.h> +int +is_io_mapping_possible(resource_size_t base, unsigned long size); + void * iomap_atomic_prot_pfn(unsigned long pfn, enum km_type type, pgprot_t prot); diff --git a/arch/x86/mach-voyager/voyager_smp.c b/arch/x86/mach-voyager/voyager_smp.c index 7ffcdeec463..b9cc84a2a4f 100644 --- a/arch/x86/mach-voyager/voyager_smp.c +++ b/arch/x86/mach-voyager/voyager_smp.c @@ -65,7 +65,7 @@ static volatile unsigned long smp_invalidate_needed; /* Bitmask of CPUs present in the system - exported by i386_syms.c, used * by scheduler but indexed physically */ -cpumask_t phys_cpu_present_map = CPU_MASK_NONE; +static cpumask_t voyager_phys_cpu_present_map = CPU_MASK_NONE; /* The internal functions */ static void send_CPI(__u32 cpuset, __u8 cpi); @@ -366,19 +366,19 @@ void __init find_smp_config(void) /* set up everything for just this CPU, we can alter * this as we start the other CPUs later */ /* now get the CPU disposition from the extended CMOS */ - cpus_addr(phys_cpu_present_map)[0] = + cpus_addr(voyager_phys_cpu_present_map)[0] = voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK); - cpus_addr(phys_cpu_present_map)[0] |= + cpus_addr(voyager_phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 1) << 8; - cpus_addr(phys_cpu_present_map)[0] |= + cpus_addr(voyager_phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 2) << 16; - cpus_addr(phys_cpu_present_map)[0] |= + cpus_addr(voyager_phys_cpu_present_map)[0] |= voyager_extended_cmos_read(VOYAGER_PROCESSOR_PRESENT_MASK + 3) << 24; - init_cpu_possible(&phys_cpu_present_map); - printk("VOYAGER SMP: phys_cpu_present_map = 0x%lx\n", - cpus_addr(phys_cpu_present_map)[0]); + init_cpu_possible(&voyager_phys_cpu_present_map); + printk("VOYAGER SMP: voyager_phys_cpu_present_map = 0x%lx\n", + cpus_addr(voyager_phys_cpu_present_map)[0]); /* Here we set up the VIC to enable SMP */ /* enable the CPIs by writing the base vector to their register */ outb(VIC_DEFAULT_CPI_BASE, VIC_CPI_BASE_REGISTER); @@ -628,15 +628,15 @@ void __init smp_boot_cpus(void) /* now that the cat has probed the Voyager System Bus, sanity * check the cpu map */ if (((voyager_quad_processors | voyager_extended_vic_processors) - & cpus_addr(phys_cpu_present_map)[0]) != - cpus_addr(phys_cpu_present_map)[0]) { + & cpus_addr(voyager_phys_cpu_present_map)[0]) != + cpus_addr(voyager_phys_cpu_present_map)[0]) { /* should panic */ printk("\n\n***WARNING*** " "Sanity check of CPU present map FAILED\n"); } } else if (voyager_level == 4) voyager_extended_vic_processors = - cpus_addr(phys_cpu_present_map)[0]; + cpus_addr(voyager_phys_cpu_present_map)[0]; /* this sets up the idle task to run on the current cpu */ voyager_extended_cpus = 1; @@ -670,7 +670,7 @@ void __init smp_boot_cpus(void) /* loop over all the extended VIC CPUs and boot them. The * Quad CPUs must be bootstrapped by their extended VIC cpu */ for (i = 0; i < nr_cpu_ids; i++) { - if (i == boot_cpu_id || !cpu_isset(i, phys_cpu_present_map)) + if (i == boot_cpu_id || !cpu_isset(i, voyager_phys_cpu_present_map)) continue; do_boot_cpu(i); /* This udelay seems to be needed for the Quad boots diff --git a/arch/x86/mm/iomap_32.c b/arch/x86/mm/iomap_32.c index ca53224fc56..6c2b1af1692 100644 --- a/arch/x86/mm/iomap_32.c +++ b/arch/x86/mm/iomap_32.c @@ -20,6 +20,24 @@ #include <asm/pat.h> #include <linux/module.h> +#ifdef CONFIG_X86_PAE +int +is_io_mapping_possible(resource_size_t base, unsigned long size) +{ + return 1; +} +#else +int +is_io_mapping_possible(resource_size_t base, unsigned long size) +{ + /* There is no way to map greater than 1 << 32 address without PAE */ + if (base + size > 0x100000000ULL) + return 0; + + return 1; +} +#endif + /* Map 'pfn' using fixed map 'type' and protections 'prot' */ void * diff --git a/arch/x86/xen/enlighten.c b/arch/x86/xen/enlighten.c index bea215230b2..b58e9633814 100644 --- a/arch/x86/xen/enlighten.c +++ b/arch/x86/xen/enlighten.c @@ -1672,6 +1672,9 @@ asmlinkage void __init xen_start_kernel(void) possible map and a non-dummy shared_info. */ per_cpu(xen_vcpu, 0) = &HYPERVISOR_shared_info->vcpu_info[0]; + local_irq_disable(); + early_boot_irqs_off(); + xen_raw_console_write("mapping kernel into physical memory\n"); pgd = xen_setup_kernel_pagetable(pgd, xen_start_info->nr_pages); diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c index cc4649577a6..6dab63bdc4c 100644 --- a/drivers/gpu/drm/i915/i915_dma.c +++ b/drivers/gpu/drm/i915/i915_dma.c @@ -1090,6 +1090,11 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) dev_priv->mm.gtt_mapping = io_mapping_create_wc(dev->agp->base, dev->agp->agp_info.aper_size * 1024*1024); + if (dev_priv->mm.gtt_mapping == NULL) { + ret = -EIO; + goto out_rmmap; + } + /* Set up a WC MTRR for non-PAT systems. This is more common than * one would think, because the kernel disables PAT on first * generation Core chips because WC PAT gets overridden by a UC @@ -1122,7 +1127,7 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) if (!I915_NEED_GFX_HWS(dev)) { ret = i915_init_phys_hws(dev); if (ret != 0) - goto out_rmmap; + goto out_iomapfree; } /* On the 945G/GM, the chipset reports the MSI capability on the @@ -1161,6 +1166,8 @@ int i915_driver_load(struct drm_device *dev, unsigned long flags) return 0; +out_iomapfree: + io_mapping_free(dev_priv->mm.gtt_mapping); out_rmmap: iounmap(dev_priv->regs); free_priv: diff --git a/drivers/media/dvb/b2c2/flexcop-hw-filter.c b/drivers/media/dvb/b2c2/flexcop-hw-filter.c index b386cc66c6b..451974ba32f 100644 --- a/drivers/media/dvb/b2c2/flexcop-hw-filter.c +++ b/drivers/media/dvb/b2c2/flexcop-hw-filter.c @@ -192,6 +192,7 @@ int flexcop_pid_feed_control(struct flexcop_device *fc, struct dvb_demux_feed *d return 0; } +EXPORT_SYMBOL(flexcop_pid_feed_control); void flexcop_hw_filter_init(struct flexcop_device *fc) { diff --git a/drivers/media/dvb/b2c2/flexcop-pci.c b/drivers/media/dvb/b2c2/flexcop-pci.c index 5b30dfc7846..76e37fd96bb 100644 --- a/drivers/media/dvb/b2c2/flexcop-pci.c +++ b/drivers/media/dvb/b2c2/flexcop-pci.c @@ -13,9 +13,9 @@ static int enable_pid_filtering = 1; module_param(enable_pid_filtering, int, 0444); MODULE_PARM_DESC(enable_pid_filtering, "enable hardware pid filtering: supported values: 0 (fullts), 1"); -static int irq_chk_intv; +static int irq_chk_intv = 100; module_param(irq_chk_intv, int, 0644); -MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently just debugging)."); +MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ streaming watchdog."); #ifdef CONFIG_DVB_B2C2_FLEXCOP_DEBUG #define dprintk(level,args...) \ @@ -34,7 +34,9 @@ MODULE_PARM_DESC(irq_chk_intv, "set the interval for IRQ watchdog (currently jus static int debug; module_param(debug, int, 0644); -MODULE_PARM_DESC(debug, "set debug level (1=info,2=regs,4=TS,8=irqdma (|-able))." DEBSTATUS); +MODULE_PARM_DESC(debug, + "set debug level (1=info,2=regs,4=TS,8=irqdma,16=check (|-able))." + DEBSTATUS); #define DRIVER_VERSION "0.1" #define DRIVER_NAME "Technisat/B2C2 FlexCop II/IIb/III Digital TV PCI Driver" @@ -58,6 +60,8 @@ struct flexcop_pci { int active_dma1_addr; /* 0 = addr0 of dma1; 1 = addr1 of dma1 */ u32 last_dma1_cur_pos; /* position of the pointer last time the timer/packet irq occured */ int count; + int count_prev; + int stream_problem; spinlock_t irq_lock; @@ -103,18 +107,32 @@ static void flexcop_pci_irq_check_work(struct work_struct *work) container_of(work, struct flexcop_pci, irq_check_work.work); struct flexcop_device *fc = fc_pci->fc_dev; - flexcop_ibi_value v = fc->read_ibi_reg(fc,sram_dest_reg_714); - - flexcop_dump_reg(fc_pci->fc_dev,dma1_000,4); - - if (v.sram_dest_reg_714.net_ovflow_error) - deb_chk("sram net_ovflow_error\n"); - if (v.sram_dest_reg_714.media_ovflow_error) - deb_chk("sram media_ovflow_error\n"); - if (v.sram_dest_reg_714.cai_ovflow_error) - deb_chk("sram cai_ovflow_error\n"); - if (v.sram_dest_reg_714.cai_ovflow_error) - deb_chk("sram cai_ovflow_error\n"); + if (fc->feedcount) { + + if (fc_pci->count == fc_pci->count_prev) { + deb_chk("no IRQ since the last check\n"); + if (fc_pci->stream_problem++ == 3) { + struct dvb_demux_feed *feed; + + spin_lock_irq(&fc->demux.lock); + list_for_each_entry(feed, &fc->demux.feed_list, + list_head) { + flexcop_pid_feed_control(fc, feed, 0); + } + + list_for_each_entry(feed, &fc->demux.feed_list, + list_head) { + flexcop_pid_feed_control(fc, feed, 1); + } + spin_unlock_irq(&fc->demux.lock); + + fc_pci->stream_problem = 0; + } + } else { + fc_pci->stream_problem = 0; + fc_pci->count_prev = fc_pci->count; + } + } schedule_delayed_work(&fc_pci->irq_check_work, msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv)); @@ -216,16 +234,12 @@ static int flexcop_pci_stream_control(struct flexcop_device *fc, int onoff) flexcop_dma_control_timer_irq(fc,FC_DMA_1,1); deb_irq("IRQ enabled\n"); + fc_pci->count_prev = fc_pci->count; + // fc_pci->active_dma1_addr = 0; // flexcop_dma_control_size_irq(fc,FC_DMA_1,1); - if (irq_chk_intv > 0) - schedule_delayed_work(&fc_pci->irq_check_work, - msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv)); } else { - if (irq_chk_intv > 0) - cancel_delayed_work(&fc_pci->irq_check_work); - flexcop_dma_control_timer_irq(fc,FC_DMA_1,0); deb_irq("IRQ disabled\n"); @@ -299,8 +313,6 @@ static int flexcop_pci_init(struct flexcop_pci *fc_pci) IRQF_SHARED, DRIVER_NAME, fc_pci)) != 0) goto err_pci_iounmap; - - fc_pci->init_state |= FC_PCI_INIT; return ret; @@ -375,6 +387,10 @@ static int flexcop_pci_probe(struct pci_dev *pdev, const struct pci_device_id *e INIT_DELAYED_WORK(&fc_pci->irq_check_work, flexcop_pci_irq_check_work); + if (irq_chk_intv > 0) + schedule_delayed_work(&fc_pci->irq_check_work, + msecs_to_jiffies(irq_chk_intv < 100 ? 100 : irq_chk_intv)); + return ret; err_fc_exit: @@ -393,6 +409,9 @@ static void flexcop_pci_remove(struct pci_dev *pdev) { struct flexcop_pci *fc_pci = pci_get_drvdata(pdev); + if (irq_chk_intv > 0) + cancel_delayed_work(&fc_pci->irq_check_work); + flexcop_pci_dma_exit(fc_pci); flexcop_device_exit(fc_pci->fc_dev); flexcop_pci_exit(fc_pci); diff --git a/drivers/media/dvb/b2c2/flexcop.c b/drivers/media/dvb/b2c2/flexcop.c index 676413a915b..91068952b50 100644 --- a/drivers/media/dvb/b2c2/flexcop.c +++ b/drivers/media/dvb/b2c2/flexcop.c @@ -212,8 +212,7 @@ void flexcop_reset_block_300(struct flexcop_device *fc) v210.sw_reset_210.Block_reset_enable = 0xb2; fc->write_ibi_reg(fc,sw_reset_210,v210); - msleep(1); - + udelay(1000); fc->write_ibi_reg(fc,ctrl_208,v208_save); } diff --git a/drivers/media/video/em28xx/em28xx-audio.c b/drivers/media/video/em28xx/em28xx-audio.c index 5d882a44e3e..2ac738fa6a0 100644 --- a/drivers/media/video/em28xx/em28xx-audio.c +++ b/drivers/media/video/em28xx/em28xx-audio.c @@ -463,6 +463,8 @@ static int em28xx_audio_init(struct em28xx *dev) pcm->info_flags = 0; pcm->private_data = dev; strcpy(pcm->name, "Empia 28xx Capture"); + + snd_card_set_dev(card, &dev->udev->dev); strcpy(card->driver, "Empia Em28xx Audio"); strcpy(card->shortname, "Em28xx Audio"); strcpy(card->longname, "Empia Em28xx Audio"); diff --git a/drivers/media/video/pxa_camera.c b/drivers/media/video/pxa_camera.c index a1d6008efcb..07c334f25aa 100644 --- a/drivers/media/video/pxa_camera.c +++ b/drivers/media/video/pxa_camera.c @@ -1155,23 +1155,23 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd, { struct soc_camera_host *ici = to_soc_camera_host(icd->dev.parent); struct pxa_camera_dev *pcdev = ici->priv; - const struct soc_camera_data_format *host_fmt, *cam_fmt = NULL; - const struct soc_camera_format_xlate *xlate; + const struct soc_camera_data_format *cam_fmt = NULL; + const struct soc_camera_format_xlate *xlate = NULL; struct soc_camera_sense sense = { .master_clock = pcdev->mclk, .pixel_clock_max = pcdev->ciclk / 4, }; - int ret, buswidth; + int ret; - xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); - if (!xlate) { - dev_warn(&ici->dev, "Format %x not found\n", pixfmt); - return -EINVAL; - } + if (pixfmt) { + xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); + if (!xlate) { + dev_warn(&ici->dev, "Format %x not found\n", pixfmt); + return -EINVAL; + } - buswidth = xlate->buswidth; - host_fmt = xlate->host_fmt; - cam_fmt = xlate->cam_fmt; + cam_fmt = xlate->cam_fmt; + } /* If PCLK is used to latch data from the sensor, check sense */ if (pcdev->platform_flags & PXA_CAMERA_PCLK_EN) @@ -1201,8 +1201,8 @@ static int pxa_camera_set_fmt(struct soc_camera_device *icd, } if (pixfmt && !ret) { - icd->buswidth = buswidth; - icd->current_fmt = host_fmt; + icd->buswidth = xlate->buswidth; + icd->current_fmt = xlate->host_fmt; } return ret; diff --git a/drivers/media/video/sh_mobile_ceu_camera.c b/drivers/media/video/sh_mobile_ceu_camera.c index 9a2586b07a0..ddcb81d0b81 100644 --- a/drivers/media/video/sh_mobile_ceu_camera.c +++ b/drivers/media/video/sh_mobile_ceu_camera.c @@ -603,21 +603,18 @@ static int sh_mobile_ceu_set_fmt(struct soc_camera_device *icd, const struct soc_camera_format_xlate *xlate; int ret; + if (!pixfmt) + return icd->ops->set_fmt(icd, pixfmt, rect); + xlate = soc_camera_xlate_by_fourcc(icd, pixfmt); if (!xlate) { dev_warn(&ici->dev, "Format %x not found\n", pixfmt); return -EINVAL; } - switch (pixfmt) { - case 0: /* Only geometry change */ - ret = icd->ops->set_fmt(icd, pixfmt, rect); - break; - default: - ret = icd->ops->set_fmt(icd, xlate->cam_fmt->fourcc, rect); - } + ret = icd->ops->set_fmt(icd, xlate->cam_fmt->fourcc, rect); - if (pixfmt && !ret) { + if (!ret) { icd->buswidth = xlate->buswidth; icd->current_fmt = xlate->host_fmt; pcdev->camera_fmt = xlate->cam_fmt; diff --git a/drivers/misc/hpilo.c b/drivers/misc/hpilo.c index f26667a7abf..cf991850f01 100644 --- a/drivers/misc/hpilo.c +++ b/drivers/misc/hpilo.c @@ -710,6 +710,7 @@ out: static struct pci_device_id ilo_devices[] = { { PCI_DEVICE(PCI_VENDOR_ID_COMPAQ, 0xB204) }, + { PCI_DEVICE(PCI_VENDOR_ID_HP, 0x3307) }, { } }; MODULE_DEVICE_TABLE(pci, ilo_devices); @@ -758,7 +759,7 @@ static void __exit ilo_exit(void) class_destroy(ilo_class); } -MODULE_VERSION("0.06"); +MODULE_VERSION("1.0"); MODULE_ALIAS(ILO_NAME); MODULE_DESCRIPTION(ILO_NAME); MODULE_AUTHOR("David Altobelli <david.altobelli@hp.com>"); diff --git a/drivers/mtd/chips/map_rom.c b/drivers/mtd/chips/map_rom.c index 821d0ed6bae..c76d6e5f47e 100644 --- a/drivers/mtd/chips/map_rom.c +++ b/drivers/mtd/chips/map_rom.c @@ -19,6 +19,7 @@ static int maprom_read (struct mtd_info *, loff_t, size_t, size_t *, u_char *); static int maprom_write (struct mtd_info *, loff_t, size_t, size_t *, const u_char *); static void maprom_nop (struct mtd_info *); static struct mtd_info *map_rom_probe(struct map_info *map); +static int maprom_erase (struct mtd_info *mtd, struct erase_info *info); static struct mtd_chip_driver maprom_chipdrv = { .probe = map_rom_probe, @@ -42,6 +43,7 @@ static struct mtd_info *map_rom_probe(struct map_info *map) mtd->read = maprom_read; mtd->write = maprom_write; mtd->sync = maprom_nop; + mtd->erase = maprom_erase; mtd->flags = MTD_CAP_ROM; mtd->erasesize = map->size; mtd->writesize = 1; @@ -71,6 +73,12 @@ static int maprom_write (struct mtd_info *mtd, loff_t to, size_t len, size_t *re return -EIO; } +static int maprom_erase (struct mtd_info *mtd, struct erase_info *info) +{ + /* We do our best 8) */ + return -EROFS; +} + static int __init map_rom_init(void) { register_mtd_chip_driver(&maprom_chipdrv); diff --git a/drivers/mtd/devices/slram.c b/drivers/mtd/devices/slram.c index a425d09f35a..00248e81ecd 100644 --- a/drivers/mtd/devices/slram.c +++ b/drivers/mtd/devices/slram.c @@ -267,22 +267,28 @@ static int parse_cmdline(char *devname, char *szstart, char *szlength) if (*(szlength) != '+') { devlength = simple_strtoul(szlength, &buffer, 0); devlength = handle_unit(devlength, buffer) - devstart; + if (devlength < devstart) + goto err_out; + + devlength -= devstart; } else { devlength = simple_strtoul(szlength + 1, &buffer, 0); devlength = handle_unit(devlength, buffer); } T("slram: devname=%s, devstart=0x%lx, devlength=0x%lx\n", devname, devstart, devlength); - if ((devstart < 0) || (devlength < 0) || (devlength % SLRAM_BLK_SZ != 0)) { - E("slram: Illegal start / length parameter.\n"); - return(-EINVAL); - } + if (devlength % SLRAM_BLK_SZ != 0) + goto err_out; if ((devstart = register_device(devname, devstart, devlength))){ unregister_devices(); return((int)devstart); } return(0); + +err_out: + E("slram: Illegal length parameter.\n"); + return(-EINVAL); } #ifndef MODULE diff --git a/drivers/mtd/lpddr/Kconfig b/drivers/mtd/lpddr/Kconfig index acd4ea9b227..5a401d8047a 100644 --- a/drivers/mtd/lpddr/Kconfig +++ b/drivers/mtd/lpddr/Kconfig @@ -12,6 +12,7 @@ config MTD_LPDDR DDR memories, intended for battery-operated systems. config MTD_QINFO_PROBE + depends on MTD_LPDDR tristate "Detect flash chips by QINFO probe" help Device Information for LPDDR chips is offered through the Overlay diff --git a/drivers/mtd/maps/Kconfig b/drivers/mtd/maps/Kconfig index 0225cbbf22d..043d50fb6ef 100644 --- a/drivers/mtd/maps/Kconfig +++ b/drivers/mtd/maps/Kconfig @@ -491,7 +491,7 @@ config MTD_PCMCIA_ANONYMOUS config MTD_BFIN_ASYNC tristate "Blackfin BF533-STAMP Flash Chip Support" - depends on BFIN533_STAMP && MTD_CFI + depends on BFIN533_STAMP && MTD_CFI && MTD_COMPLEX_MAPPINGS select MTD_PARTITIONS default y help diff --git a/drivers/mtd/maps/bfin-async-flash.c b/drivers/mtd/maps/bfin-async-flash.c index 6fec86aaed7..576611f605d 100644 --- a/drivers/mtd/maps/bfin-async-flash.c +++ b/drivers/mtd/maps/bfin-async-flash.c @@ -152,14 +152,18 @@ static int __devinit bfin_flash_probe(struct platform_device *pdev) if (gpio_request(state->enet_flash_pin, DRIVER_NAME)) { pr_devinit(KERN_ERR DRIVER_NAME ": Failed to request gpio %d\n", state->enet_flash_pin); + kfree(state); return -EBUSY; } gpio_direction_output(state->enet_flash_pin, 1); pr_devinit(KERN_NOTICE DRIVER_NAME ": probing %d-bit flash bus\n", state->map.bankwidth * 8); state->mtd = do_map_probe(memory->name, &state->map); - if (!state->mtd) + if (!state->mtd) { + gpio_free(state->enet_flash_pin); + kfree(state); return -ENXIO; + } #ifdef CONFIG_MTD_PARTITIONS ret = parse_mtd_partitions(state->mtd, part_probe_types, &pdata->parts, 0); diff --git a/drivers/mtd/maps/ck804xrom.c b/drivers/mtd/maps/ck804xrom.c index 5f7a245ed13..424f17d6ffd 100644 --- a/drivers/mtd/maps/ck804xrom.c +++ b/drivers/mtd/maps/ck804xrom.c @@ -342,9 +342,9 @@ static struct pci_device_id ck804xrom_pci_tbl[] = { { 0, } }; +#if 0 MODULE_DEVICE_TABLE(pci, ck804xrom_pci_tbl); -#if 0 static struct pci_driver ck804xrom_driver = { .name = MOD_NAME, .id_table = ck804xrom_pci_tbl, diff --git a/drivers/mtd/maps/physmap.c b/drivers/mtd/maps/physmap.c index 87743661d48..4b122e7ab4b 100644 --- a/drivers/mtd/maps/physmap.c +++ b/drivers/mtd/maps/physmap.c @@ -29,6 +29,7 @@ struct physmap_flash_info { struct map_info map[MAX_RESOURCES]; #ifdef CONFIG_MTD_PARTITIONS int nr_parts; + struct mtd_partition *parts; #endif }; @@ -45,25 +46,26 @@ static int physmap_flash_remove(struct platform_device *dev) physmap_data = dev->dev.platform_data; -#ifdef CONFIG_MTD_CONCAT - if (info->cmtd != info->mtd[0]) { +#ifdef CONFIG_MTD_PARTITIONS + if (info->nr_parts) { + del_mtd_partitions(info->cmtd); + kfree(info->parts); + } else if (physmap_data->nr_parts) + del_mtd_partitions(info->cmtd); + else del_mtd_device(info->cmtd); +#else + del_mtd_device(info->cmtd); +#endif + +#ifdef CONFIG_MTD_CONCAT + if (info->cmtd != info->mtd[0]) mtd_concat_destroy(info->cmtd); - } #endif for (i = 0; i < MAX_RESOURCES; i++) { - if (info->mtd[i] != NULL) { -#ifdef CONFIG_MTD_PARTITIONS - if (info->nr_parts || physmap_data->nr_parts) - del_mtd_partitions(info->mtd[i]); - else - del_mtd_device(info->mtd[i]); -#else - del_mtd_device(info->mtd[i]); -#endif + if (info->mtd[i] != NULL) map_destroy(info->mtd[i]); - } } return 0; } @@ -86,9 +88,6 @@ static int physmap_flash_probe(struct platform_device *dev) int err = 0; int i; int devices_found = 0; -#ifdef CONFIG_MTD_PARTITIONS - struct mtd_partition *parts; -#endif physmap_data = dev->dev.platform_data; if (physmap_data == NULL) @@ -167,10 +166,11 @@ static int physmap_flash_probe(struct platform_device *dev) goto err_out; #ifdef CONFIG_MTD_PARTITIONS - err = parse_mtd_partitions(info->cmtd, part_probe_types, &parts, 0); + err = parse_mtd_partitions(info->cmtd, part_probe_types, + &info->parts, 0); if (err > 0) { - add_mtd_partitions(info->cmtd, parts, err); - kfree(parts); + add_mtd_partitions(info->cmtd, info->parts, err); + info->nr_parts = err; return 0; } diff --git a/drivers/pci/hotplug/pciehp.h b/drivers/pci/hotplug/pciehp.h index db85284ffb6..39ae37589fd 100644 --- a/drivers/pci/hotplug/pciehp.h +++ b/drivers/pci/hotplug/pciehp.h @@ -111,6 +111,7 @@ struct controller { int cmd_busy; unsigned int no_cmd_complete:1; unsigned int link_active_reporting:1; + unsigned int notification_enabled:1; }; #define INT_BUTTON_IGNORE 0 @@ -170,6 +171,7 @@ extern int pciehp_configure_device(struct slot *p_slot); extern int pciehp_unconfigure_device(struct slot *p_slot); extern void pciehp_queue_pushbutton_work(struct work_struct *work); struct controller *pcie_init(struct pcie_device *dev); +int pcie_init_notification(struct controller *ctrl); int pciehp_enable_slot(struct slot *p_slot); int pciehp_disable_slot(struct slot *p_slot); int pcie_enable_notification(struct controller *ctrl); diff --git a/drivers/pci/hotplug/pciehp_core.c b/drivers/pci/hotplug/pciehp_core.c index c2485542f54..681e3912b82 100644 --- a/drivers/pci/hotplug/pciehp_core.c +++ b/drivers/pci/hotplug/pciehp_core.c @@ -434,6 +434,13 @@ static int pciehp_probe(struct pcie_device *dev, const struct pcie_port_service_ goto err_out_release_ctlr; } + /* Enable events after we have setup the data structures */ + rc = pcie_init_notification(ctrl); + if (rc) { + ctrl_err(ctrl, "Notification initialization failed\n"); + goto err_out_release_ctlr; + } + /* Check if slot is occupied */ t_slot = pciehp_find_slot(ctrl, ctrl->slot_device_offset); t_slot->hpc_ops->get_adapter_status(t_slot, &value); diff --git a/drivers/pci/hotplug/pciehp_hpc.c b/drivers/pci/hotplug/pciehp_hpc.c index 71a8012886b..7a16c6897bb 100644 --- a/drivers/pci/hotplug/pciehp_hpc.c +++ b/drivers/pci/hotplug/pciehp_hpc.c @@ -934,7 +934,7 @@ static void pcie_disable_notification(struct controller *ctrl) ctrl_warn(ctrl, "Cannot disable software notification\n"); } -static int pcie_init_notification(struct controller *ctrl) +int pcie_init_notification(struct controller *ctrl) { if (pciehp_request_irq(ctrl)) return -1; @@ -942,13 +942,17 @@ static int pcie_init_notification(struct controller *ctrl) pciehp_free_irq(ctrl); return -1; } + ctrl->notification_enabled = 1; return 0; } static void pcie_shutdown_notification(struct controller *ctrl) { - pcie_disable_notification(ctrl); - pciehp_free_irq(ctrl); + if (ctrl->notification_enabled) { + pcie_disable_notification(ctrl); + pciehp_free_irq(ctrl); + ctrl->notification_enabled = 0; + } } static int pcie_init_slot(struct controller *ctrl) @@ -1110,13 +1114,8 @@ struct controller *pcie_init(struct pcie_device *dev) if (pcie_init_slot(ctrl)) goto abort_ctrl; - if (pcie_init_notification(ctrl)) - goto abort_slot; - return ctrl; -abort_slot: - pcie_cleanup_slot(ctrl); abort_ctrl: kfree(ctrl); abort: diff --git a/drivers/pci/pcie/aer/aerdrv_core.c b/drivers/pci/pcie/aer/aerdrv_core.c index aac7006949f..d0c97368586 100644 --- a/drivers/pci/pcie/aer/aerdrv_core.c +++ b/drivers/pci/pcie/aer/aerdrv_core.c @@ -108,6 +108,34 @@ int pci_cleanup_aer_correct_error_status(struct pci_dev *dev) } #endif /* 0 */ + +static void set_device_error_reporting(struct pci_dev *dev, void *data) +{ + bool enable = *((bool *)data); + + if (dev->pcie_type != PCIE_RC_PORT && + dev->pcie_type != PCIE_SW_UPSTREAM_PORT && + dev->pcie_type != PCIE_SW_DOWNSTREAM_PORT) + return; + + if (enable) + pci_enable_pcie_error_reporting(dev); + else + pci_disable_pcie_error_reporting(dev); +} + +/** + * set_downstream_devices_error_reporting - enable/disable the error reporting bits on the root port and its downstream ports. + * @dev: pointer to root port's pci_dev data structure + * @enable: true = enable error reporting, false = disable error reporting. + */ +static void set_downstream_devices_error_reporting(struct pci_dev *dev, + bool enable) +{ + set_device_error_reporting(dev, &enable); + pci_walk_bus(dev->subordinate, set_device_error_reporting, &enable); +} + static int find_device_iter(struct device *device, void *data) { struct pci_dev *dev; @@ -525,15 +553,11 @@ void aer_enable_rootport(struct aer_rpc *rpc) pci_read_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, ®32); pci_write_config_dword(pdev, aer_pos + PCI_ERR_UNCOR_STATUS, reg32); - /* Enable Root Port device reporting error itself */ - pci_read_config_word(pdev, pos+PCI_EXP_DEVCTL, ®16); - reg16 = reg16 | - PCI_EXP_DEVCTL_CERE | - PCI_EXP_DEVCTL_NFERE | - PCI_EXP_DEVCTL_FERE | - PCI_EXP_DEVCTL_URRE; - pci_write_config_word(pdev, pos+PCI_EXP_DEVCTL, - reg16); + /* + * Enable error reporting for the root port device and downstream port + * devices. + */ + set_downstream_devices_error_reporting(pdev, true); /* Enable Root Port's interrupt in response to error messages */ pci_write_config_dword(pdev, @@ -553,6 +577,12 @@ static void disable_root_aer(struct aer_rpc *rpc) u32 reg32; int pos; + /* + * Disable error reporting for the root port device and downstream port + * devices. + */ + set_downstream_devices_error_reporting(pdev, false); + pos = pci_find_ext_capability(pdev, PCI_EXT_CAP_ID_ERR); /* Disable Root's interrupt in response to error messages */ pci_write_config_dword(pdev, pos + PCI_ERR_ROOT_COMMAND, 0); diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c index f9b874eaeb9..248b4db9155 100644 --- a/drivers/pci/pcie/portdrv_pci.c +++ b/drivers/pci/pcie/portdrv_pci.c @@ -97,8 +97,6 @@ static int __devinit pcie_portdrv_probe (struct pci_dev *dev, pcie_portdrv_save_config(dev); - pci_enable_pcie_error_reporting(dev); - return 0; } diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index baad093aafe..f20d55368ed 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -1584,6 +1584,7 @@ DECLARE_PCI_FIXUP_RESUME(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_ */ #define AMD_813X_MISC 0x40 #define AMD_813X_NOIOAMODE (1<<0) +#define AMD_813X_REV_B2 0x13 static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) { @@ -1591,6 +1592,8 @@ static void quirk_disable_amd_813x_boot_interrupt(struct pci_dev *dev) if (noioapicquirk) return; + if (dev->revision == AMD_813X_REV_B2) + return; pci_read_config_dword(dev, AMD_813X_MISC, &pci_config_dword); pci_config_dword &= ~AMD_813X_NOIOAMODE; @@ -1981,7 +1984,6 @@ static void __devinit quirk_msi_ht_cap(struct pci_dev *dev) DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT2000_PCIE, quirk_msi_ht_cap); - /* The nVidia CK804 chipset may have 2 HT MSI mappings. * MSI are supported if the MSI capability set in any of these mappings. */ @@ -2032,6 +2034,9 @@ DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_SERVERWORKS, PCI_DEVICE_ID_SERVERWORKS_HT1000_PXB, ht_enable_msi_mapping); +DECLARE_PCI_FIXUP_HEADER(PCI_VENDOR_ID_AMD, PCI_DEVICE_ID_AMD_8132_BRIDGE, + ht_enable_msi_mapping); + /* The P5N32-SLI Premium motherboard from Asus has a problem with msi * for the MCP55 NIC. It is not yet determined whether the msi problem * also affects other devices. As for now, turn off msi for this device. @@ -2048,10 +2053,100 @@ DECLARE_PCI_FIXUP_EARLY(PCI_VENDOR_ID_NVIDIA, PCI_DEVICE_ID_NVIDIA_NVENET_15, nvenet_msi_disable); -static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) +static void __devinit nv_ht_enable_msi_mapping(struct pci_dev *dev) { struct pci_dev *host_bridge; + int pos; + int i, dev_no; + int found = 0; + + dev_no = dev->devfn >> 3; + for (i = dev_no; i >= 0; i--) { + host_bridge = pci_get_slot(dev->bus, PCI_DEVFN(i, 0)); + if (!host_bridge) + continue; + + pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); + if (pos != 0) { + found = 1; + break; + } + pci_dev_put(host_bridge); + } + + if (!found) + return; + + /* root did that ! */ + if (msi_ht_cap_enabled(host_bridge)) + goto out; + + ht_enable_msi_mapping(dev); + +out: + pci_dev_put(host_bridge); +} + +static void __devinit ht_disable_msi_mapping(struct pci_dev *dev) +{ + int pos, ttl = 48; + + pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); + while (pos && ttl--) { + u8 flags; + + if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, + &flags) == 0) { + dev_info(&dev->dev, "Enabling HT MSI Mapping\n"); + + pci_write_config_byte(dev, pos + HT_MSI_FLAGS, + flags & ~HT_MSI_FLAGS_ENABLE); + } + pos = pci_find_next_ht_capability(dev, pos, + HT_CAPTYPE_MSI_MAPPING); + } +} + +static int __devinit ht_check_msi_mapping(struct pci_dev *dev) +{ int pos, ttl = 48; + int found = 0; + + /* check if there is HT MSI cap or enabled on this device */ + pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); + while (pos && ttl--) { + u8 flags; + + if (found < 1) + found = 1; + if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, + &flags) == 0) { + if (flags & HT_MSI_FLAGS_ENABLE) { + if (found < 2) { + found = 2; + break; + } + } + } + pos = pci_find_next_ht_capability(dev, pos, + HT_CAPTYPE_MSI_MAPPING); + } + + return found; +} + +static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) +{ + struct pci_dev *host_bridge; + int pos; + int found; + + /* check if there is HT MSI cap or enabled on this device */ + found = ht_check_msi_mapping(dev); + + /* no HT MSI CAP */ + if (found == 0) + return; /* * HT MSI mapping should be disabled on devices that are below @@ -2067,24 +2162,19 @@ static void __devinit nv_msi_ht_cap_quirk(struct pci_dev *dev) pos = pci_find_ht_capability(host_bridge, HT_CAPTYPE_SLAVE); if (pos != 0) { /* Host bridge is to HT */ - ht_enable_msi_mapping(dev); + if (found == 1) { + /* it is not enabled, try to enable it */ + nv_ht_enable_msi_mapping(dev); + } return; } - /* Host bridge is not to HT, disable HT MSI mapping on this device */ - pos = pci_find_ht_capability(dev, HT_CAPTYPE_MSI_MAPPING); - while (pos && ttl--) { - u8 flags; + /* HT MSI is not enabled */ + if (found == 1) + return; - if (pci_read_config_byte(dev, pos + HT_MSI_FLAGS, - &flags) == 0) { - dev_info(&dev->dev, "Disabling HT MSI mapping"); - pci_write_config_byte(dev, pos + HT_MSI_FLAGS, - flags & ~HT_MSI_FLAGS_ENABLE); - } - pos = pci_find_next_ht_capability(dev, pos, - HT_CAPTYPE_MSI_MAPPING); - } + /* Host bridge is not to HT, disable HT MSI mapping on this device */ + ht_disable_msi_mapping(dev); } DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_NVIDIA, PCI_ANY_ID, nv_msi_ht_cap_quirk); DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_AL, PCI_ANY_ID, nv_msi_ht_cap_quirk); diff --git a/drivers/serial/sh-sci.h b/drivers/serial/sh-sci.h index 3599828b976..022e89ffec1 100644 --- a/drivers/serial/sh-sci.h +++ b/drivers/serial/sh-sci.h @@ -133,7 +133,7 @@ # define SCSPTR3 0xffed0024 /* 16 bit SCIF */ # define SCSPTR4 0xffee0024 /* 16 bit SCIF */ # define SCSPTR5 0xffef0024 /* 16 bit SCIF */ -# define SCIF_OPER 0x0001 /* Overrun error bit */ +# define SCIF_ORER 0x0001 /* Overrun error bit */ # define SCSCR_INIT(port) 0x3a /* TIE=0,RIE=0,TE=1,RE=1,REIE=1 */ #elif defined(CONFIG_CPU_SUBTYPE_SH7201) || \ defined(CONFIG_CPU_SUBTYPE_SH7203) || \ diff --git a/drivers/usb/class/cdc-acm.c b/drivers/usb/class/cdc-acm.c index 326dd7f65ee..b3d5a23ab56 100644 --- a/drivers/usb/class/cdc-acm.c +++ b/drivers/usb/class/cdc-acm.c @@ -1376,6 +1376,15 @@ static struct usb_device_id acm_ids[] = { { USB_DEVICE(0x0572, 0x1324), /* Conexant USB MODEM RD02-D400 */ .driver_info = NO_UNION_NORMAL, /* has no union descriptor */ }, + { USB_DEVICE(0x22b8, 0x6425), /* Motorola MOTOMAGX phones */ + }, + { USB_DEVICE(0x0572, 0x1329), /* Hummingbird huc56s (Conexant) */ + .driver_info = NO_UNION_NORMAL, /* union descriptor misplaced on + data interface instead of + communications interface. + Maybe we should define a new + quirk for this. */ + }, /* control interfaces with various AT-command sets */ { USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_ACM, diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c index 31fb204f44c..49e7f56e0d7 100644 --- a/drivers/usb/core/message.c +++ b/drivers/usb/core/message.c @@ -653,7 +653,7 @@ int usb_get_descriptor(struct usb_device *dev, unsigned char type, if (result <= 0 && result != -ETIMEDOUT) continue; if (result > 1 && ((u8 *)buf)[1] != type) { - result = -EPROTO; + result = -ENODATA; continue; } break; @@ -696,8 +696,13 @@ static int usb_get_string(struct usb_device *dev, unsigned short langid, USB_REQ_GET_DESCRIPTOR, USB_DIR_IN, (USB_DT_STRING << 8) + index, langid, buf, size, USB_CTRL_GET_TIMEOUT); - if (!(result == 0 || result == -EPIPE)) - break; + if (result == 0 || result == -EPIPE) + continue; + if (result > 1 && ((u8 *) buf)[1] != USB_DT_STRING) { + result = -ENODATA; + continue; + } + break; } return result; } diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index 3219d137340..e55fef52a5d 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -191,6 +191,7 @@ config USB_GADGET_OMAP boolean "OMAP USB Device Controller" depends on ARCH_OMAP select ISP1301_OMAP if MACH_OMAP_H2 || MACH_OMAP_H3 || MACH_OMAP_H4_OTG + select USB_OTG_UTILS if ARCH_OMAP help Many Texas Instruments OMAP processors have flexible full speed USB device controllers, with support for up to 30 diff --git a/drivers/usb/gadget/f_obex.c b/drivers/usb/gadget/f_obex.c index 80c2e7e9622..38aa896cc5d 100644 --- a/drivers/usb/gadget/f_obex.c +++ b/drivers/usb/gadget/f_obex.c @@ -366,9 +366,9 @@ obex_bind(struct usb_configuration *c, struct usb_function *f) f->hs_descriptors = usb_copy_descriptors(hs_function); obex->hs.obex_in = usb_find_endpoint(hs_function, - f->descriptors, &obex_hs_ep_in_desc); + f->hs_descriptors, &obex_hs_ep_in_desc); obex->hs.obex_out = usb_find_endpoint(hs_function, - f->descriptors, &obex_hs_ep_out_desc); + f->hs_descriptors, &obex_hs_ep_out_desc); } /* Avoid letting this gadget enumerate until the userspace diff --git a/drivers/usb/gadget/file_storage.c b/drivers/usb/gadget/file_storage.c index b10fa31cc91..1ab9dac7e12 100644 --- a/drivers/usb/gadget/file_storage.c +++ b/drivers/usb/gadget/file_storage.c @@ -3879,7 +3879,11 @@ static int __init check_parameters(struct fsg_dev *fsg) mod_data.protocol_type = USB_SC_SCSI; mod_data.protocol_name = "Transparent SCSI"; - if (gadget_is_sh(fsg->gadget)) + /* Some peripheral controllers are known not to be able to + * halt bulk endpoints correctly. If one of them is present, + * disable stalls. + */ + if (gadget_is_sh(fsg->gadget) || gadget_is_at91(fsg->gadget)) mod_data.can_stall = 0; if (mod_data.release == 0xffff) { // Parameter wasn't set diff --git a/drivers/usb/gadget/fsl_usb2_udc.c b/drivers/usb/gadget/fsl_usb2_udc.c index f3c6703cffd..d8d9a52a44b 100644 --- a/drivers/usb/gadget/fsl_usb2_udc.c +++ b/drivers/usb/gadget/fsl_usb2_udc.c @@ -404,7 +404,10 @@ static void struct_ep_qh_setup(struct fsl_udc *udc, unsigned char ep_num, } if (zlt) tmp |= EP_QUEUE_HEAD_ZLT_SEL; + p_QH->max_pkt_length = cpu_to_le32(tmp); + p_QH->next_dtd_ptr = 1; + p_QH->size_ioc_int_sts = 0; return; } diff --git a/drivers/usb/host/ehci-hcd.c b/drivers/usb/host/ehci-hcd.c index 4725d15d096..e551bb38852 100644 --- a/drivers/usb/host/ehci-hcd.c +++ b/drivers/usb/host/ehci-hcd.c @@ -485,6 +485,7 @@ static int ehci_init(struct usb_hcd *hcd) * periodic_size can shrink by USBCMD update if hcc_params allows. */ ehci->periodic_size = DEFAULT_I_TDPS; + INIT_LIST_HEAD(&ehci->cached_itd_list); if ((retval = ehci_mem_init(ehci, GFP_KERNEL)) < 0) return retval; @@ -497,6 +498,7 @@ static int ehci_init(struct usb_hcd *hcd) ehci->reclaim = NULL; ehci->next_uframe = -1; + ehci->clock_frame = -1; /* * dedicate a qh for the async ring head, since we couldn't unlink diff --git a/drivers/usb/host/ehci-mem.c b/drivers/usb/host/ehci-mem.c index 0431397836f..10d52919abb 100644 --- a/drivers/usb/host/ehci-mem.c +++ b/drivers/usb/host/ehci-mem.c @@ -128,6 +128,7 @@ static inline void qh_put (struct ehci_qh *qh) static void ehci_mem_cleanup (struct ehci_hcd *ehci) { + free_cached_itd_list(ehci); if (ehci->async) qh_put (ehci->async); ehci->async = NULL; diff --git a/drivers/usb/host/ehci-sched.c b/drivers/usb/host/ehci-sched.c index a081ee65bde..07bcb931021 100644 --- a/drivers/usb/host/ehci-sched.c +++ b/drivers/usb/host/ehci-sched.c @@ -1004,7 +1004,8 @@ iso_stream_put(struct ehci_hcd *ehci, struct ehci_iso_stream *stream) is_in = (stream->bEndpointAddress & USB_DIR_IN) ? 0x10 : 0; stream->bEndpointAddress &= 0x0f; - stream->ep->hcpriv = NULL; + if (stream->ep) + stream->ep->hcpriv = NULL; if (stream->rescheduled) { ehci_info (ehci, "ep%d%s-iso rescheduled " @@ -1653,14 +1654,28 @@ itd_complete ( (stream->bEndpointAddress & USB_DIR_IN) ? "in" : "out"); } iso_stream_put (ehci, stream); - /* OK to recycle this ITD now that its completion callback ran. */ + done: usb_put_urb(urb); itd->urb = NULL; - itd->stream = NULL; - list_move(&itd->itd_list, &stream->free_list); - iso_stream_put(ehci, stream); - + if (ehci->clock_frame != itd->frame || itd->index[7] != -1) { + /* OK to recycle this ITD now. */ + itd->stream = NULL; + list_move(&itd->itd_list, &stream->free_list); + iso_stream_put(ehci, stream); + } else { + /* HW might remember this ITD, so we can't recycle it yet. + * Move it to a safe place until a new frame starts. + */ + list_move(&itd->itd_list, &ehci->cached_itd_list); + if (stream->refcount == 2) { + /* If iso_stream_put() were called here, stream + * would be freed. Instead, just prevent reuse. + */ + stream->ep->hcpriv = NULL; + stream->ep = NULL; + } + } return retval; } @@ -2101,6 +2116,20 @@ done: /*-------------------------------------------------------------------------*/ +static void free_cached_itd_list(struct ehci_hcd *ehci) +{ + struct ehci_itd *itd, *n; + + list_for_each_entry_safe(itd, n, &ehci->cached_itd_list, itd_list) { + struct ehci_iso_stream *stream = itd->stream; + itd->stream = NULL; + list_move(&itd->itd_list, &stream->free_list); + iso_stream_put(ehci, stream); + } +} + +/*-------------------------------------------------------------------------*/ + static void scan_periodic (struct ehci_hcd *ehci) { @@ -2115,10 +2144,17 @@ scan_periodic (struct ehci_hcd *ehci) * Touches as few pages as possible: cache-friendly. */ now_uframe = ehci->next_uframe; - if (HC_IS_RUNNING (ehci_to_hcd(ehci)->state)) + if (HC_IS_RUNNING(ehci_to_hcd(ehci)->state)) { clock = ehci_readl(ehci, &ehci->regs->frame_index); - else + clock_frame = (clock >> 3) % ehci->periodic_size; + } else { clock = now_uframe + mod - 1; + clock_frame = -1; + } + if (ehci->clock_frame != clock_frame) { + free_cached_itd_list(ehci); + ehci->clock_frame = clock_frame; + } clock %= mod; clock_frame = clock >> 3; @@ -2277,6 +2313,10 @@ restart: /* rescan the rest of this frame, then ... */ clock = now; clock_frame = clock >> 3; + if (ehci->clock_frame != clock_frame) { + free_cached_itd_list(ehci); + ehci->clock_frame = clock_frame; + } } else { now_uframe++; now_uframe %= mod; diff --git a/drivers/usb/host/ehci.h b/drivers/usb/host/ehci.h index fb7054ccf4f..262b00c9b33 100644 --- a/drivers/usb/host/ehci.h +++ b/drivers/usb/host/ehci.h @@ -87,6 +87,10 @@ struct ehci_hcd { /* one per controller */ int next_uframe; /* scan periodic, start here */ unsigned periodic_sched; /* periodic activity count */ + /* list of itds completed while clock_frame was still active */ + struct list_head cached_itd_list; + unsigned clock_frame; + /* per root hub port */ unsigned long reset_done [EHCI_MAX_ROOT_PORTS]; @@ -220,6 +224,8 @@ timer_action (struct ehci_hcd *ehci, enum ehci_timer_action action) } } +static void free_cached_itd_list(struct ehci_hcd *ehci); + /*-------------------------------------------------------------------------*/ #include <linux/usb/ehci_def.h> diff --git a/drivers/usb/musb/davinci.c b/drivers/usb/musb/davinci.c index 5a8fd5d57a1..2dc7606f319 100644 --- a/drivers/usb/musb/davinci.c +++ b/drivers/usb/musb/davinci.c @@ -377,18 +377,8 @@ int __init musb_platform_init(struct musb *musb) u32 revision; musb->mregs += DAVINCI_BASE_OFFSET; -#if 0 - /* REVISIT there's something odd about clocking, this - * didn't appear do the job ... - */ - musb->clock = clk_get(pDevice, "usb"); - if (IS_ERR(musb->clock)) - return PTR_ERR(musb->clock); - status = clk_enable(musb->clock); - if (status < 0) - return -ENODEV; -#endif + clk_enable(musb->clock); /* returns zero if e.g. not clocked */ revision = musb_readl(tibase, DAVINCI_USB_VERSION_REG); @@ -453,5 +443,8 @@ int musb_platform_exit(struct musb *musb) } phy_off(); + + clk_disable(musb->clock); + return 0; } diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c index 2cc34fa05b7..af77e465900 100644 --- a/drivers/usb/musb/musb_core.c +++ b/drivers/usb/musb/musb_core.c @@ -115,7 +115,7 @@ unsigned musb_debug; -module_param(musb_debug, uint, S_IRUGO | S_IWUSR); +module_param_named(debug, musb_debug, uint, S_IRUGO | S_IWUSR); MODULE_PARM_DESC(debug, "Debug message level. Default = 0"); #define DRIVER_AUTHOR "Mentor Graphics, Texas Instruments, Nokia" @@ -767,6 +767,7 @@ static irqreturn_t musb_stage2_irq(struct musb *musb, u8 int_usb, #ifdef CONFIG_USB_MUSB_HDRC_HCD case OTG_STATE_A_HOST: case OTG_STATE_A_SUSPEND: + usb_hcd_resume_root_hub(musb_to_hcd(musb)); musb_root_disconnect(musb); if (musb->a_wait_bcon != 0) musb_platform_try_idle(musb, jiffies @@ -1815,7 +1816,7 @@ static void musb_free(struct musb *musb) #ifdef CONFIG_SYSFS device_remove_file(musb->controller, &dev_attr_mode); device_remove_file(musb->controller, &dev_attr_vbus); -#ifdef CONFIG_USB_MUSB_OTG +#ifdef CONFIG_USB_GADGET_MUSB_HDRC device_remove_file(musb->controller, &dev_attr_srp); #endif #endif @@ -2063,7 +2064,7 @@ fail2: #ifdef CONFIG_SYSFS device_remove_file(musb->controller, &dev_attr_mode); device_remove_file(musb->controller, &dev_attr_vbus); -#ifdef CONFIG_USB_MUSB_OTG +#ifdef CONFIG_USB_GADGET_MUSB_HDRC device_remove_file(musb->controller, &dev_attr_srp); #endif #endif @@ -2243,10 +2244,10 @@ static int __init musb_init(void) return platform_driver_probe(&musb_driver, musb_probe); } -/* make us init after usbcore and before usb - * gadget and host-side drivers start to register +/* make us init after usbcore and i2c (transceivers, regulators, etc) + * and before usb gadget and host-side drivers start to register */ -subsys_initcall(musb_init); +fs_initcall(musb_init); static void __exit musb_cleanup(void) { diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c index 4ea30538798..c7ebd0867fc 100644 --- a/drivers/usb/musb/musb_gadget.c +++ b/drivers/usb/musb/musb_gadget.c @@ -575,7 +575,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) struct usb_request *request = &req->request; struct musb_ep *musb_ep = &musb->endpoints[epnum].ep_out; void __iomem *epio = musb->endpoints[epnum].regs; - u16 fifo_count = 0; + unsigned fifo_count = 0; u16 len = musb_ep->packet_sz; csr = musb_readw(epio, MUSB_RXCSR); @@ -687,7 +687,7 @@ static void rxstate(struct musb *musb, struct musb_request *req) len, fifo_count, musb_ep->packet_sz); - fifo_count = min(len, fifo_count); + fifo_count = min_t(unsigned, len, fifo_count); #ifdef CONFIG_USB_TUSB_OMAP_DMA if (tusb_dma_omap() && musb_ep->dma) { diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c index a035ceccf95..6dbbd0786a6 100644 --- a/drivers/usb/musb/musb_host.c +++ b/drivers/usb/musb/musb_host.c @@ -335,16 +335,11 @@ musb_save_toggle(struct musb_hw_ep *ep, int is_in, struct urb *urb) static struct musb_qh * musb_giveback(struct musb_qh *qh, struct urb *urb, int status) { - int is_in; struct musb_hw_ep *ep = qh->hw_ep; struct musb *musb = ep->musb; + int is_in = usb_pipein(urb->pipe); int ready = qh->is_ready; - if (ep->is_shared_fifo) - is_in = 1; - else - is_in = usb_pipein(urb->pipe); - /* save toggle eagerly, for paranoia */ switch (qh->type) { case USB_ENDPOINT_XFER_BULK: @@ -432,7 +427,7 @@ musb_advance_schedule(struct musb *musb, struct urb *urb, else qh = musb_giveback(qh, urb, urb->status); - if (qh && qh->is_ready && !list_empty(&qh->hep->urb_list)) { + if (qh != NULL && qh->is_ready) { DBG(4, "... next ep%d %cX urb %p\n", hw_ep->epnum, is_in ? 'R' : 'T', next_urb(qh)); @@ -942,8 +937,8 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb) switch (musb->ep0_stage) { case MUSB_EP0_IN: fifo_dest = urb->transfer_buffer + urb->actual_length; - fifo_count = min(len, ((u16) (urb->transfer_buffer_length - - urb->actual_length))); + fifo_count = min_t(size_t, len, urb->transfer_buffer_length - + urb->actual_length); if (fifo_count < len) urb->status = -EOVERFLOW; @@ -976,10 +971,9 @@ static bool musb_h_ep0_continue(struct musb *musb, u16 len, struct urb *urb) } /* FALLTHROUGH */ case MUSB_EP0_OUT: - fifo_count = min(qh->maxpacket, ((u16) - (urb->transfer_buffer_length - - urb->actual_length))); - + fifo_count = min_t(size_t, qh->maxpacket, + urb->transfer_buffer_length - + urb->actual_length); if (fifo_count) { fifo_dest = (u8 *) (urb->transfer_buffer + urb->actual_length); @@ -1161,7 +1155,8 @@ void musb_host_tx(struct musb *musb, u8 epnum) struct urb *urb; struct musb_hw_ep *hw_ep = musb->endpoints + epnum; void __iomem *epio = hw_ep->regs; - struct musb_qh *qh = hw_ep->out_qh; + struct musb_qh *qh = hw_ep->is_shared_fifo ? hw_ep->in_qh + : hw_ep->out_qh; u32 status = 0; void __iomem *mbase = musb->mregs; struct dma_channel *dma; @@ -1308,7 +1303,8 @@ void musb_host_tx(struct musb *musb, u8 epnum) * packets before updating TXCSR ... other docs disagree ... */ /* PIO: start next packet in this URB */ - wLength = min(qh->maxpacket, (u16) wLength); + if (wLength > qh->maxpacket) + wLength = qh->maxpacket; musb_write_fifo(hw_ep, wLength, buf); qh->segsize = wLength; @@ -1867,19 +1863,21 @@ static int musb_urb_enqueue( } qh->type_reg = type_reg; - /* precompute rxinterval/txinterval register */ - interval = min((u8)16, epd->bInterval); /* log encoding */ + /* Precompute RXINTERVAL/TXINTERVAL register */ switch (qh->type) { case USB_ENDPOINT_XFER_INT: - /* fullspeed uses linear encoding */ - if (USB_SPEED_FULL == urb->dev->speed) { - interval = epd->bInterval; - if (!interval) - interval = 1; + /* + * Full/low speeds use the linear encoding, + * high speed uses the logarithmic encoding. + */ + if (urb->dev->speed <= USB_SPEED_FULL) { + interval = max_t(u8, epd->bInterval, 1); + break; } /* FALLTHROUGH */ case USB_ENDPOINT_XFER_ISOC: - /* iso always uses log encoding */ + /* ISO always uses logarithmic encoding */ + interval = min_t(u8, epd->bInterval, 16); break; default: /* REVISIT we actually want to use NAK limits, hinting to the @@ -2037,9 +2035,9 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) goto done; /* Any URB not actively programmed into endpoint hardware can be - * immediately given back. Such an URB must be at the head of its + * immediately given back; that's any URB not at the head of an * endpoint queue, unless someday we get real DMA queues. And even - * then, it might not be known to the hardware... + * if it's at the head, it might not be known to the hardware... * * Otherwise abort current transfer, pending dma, etc.; urb->status * has already been updated. This is a synchronous abort; it'd be @@ -2078,6 +2076,15 @@ static int musb_urb_dequeue(struct usb_hcd *hcd, struct urb *urb, int status) qh->is_ready = 0; __musb_giveback(musb, urb, 0); qh->is_ready = ready; + + /* If nothing else (usually musb_giveback) is using it + * and its URB list has emptied, recycle this qh. + */ + if (ready && list_empty(&qh->hep->urb_list)) { + qh->hep->hcpriv = NULL; + list_del(&qh->ring); + kfree(qh); + } } else ret = musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN); done: @@ -2093,15 +2100,16 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) unsigned long flags; struct musb *musb = hcd_to_musb(hcd); u8 is_in = epnum & USB_DIR_IN; - struct musb_qh *qh = hep->hcpriv; - struct urb *urb, *tmp; + struct musb_qh *qh; + struct urb *urb; struct list_head *sched; - if (!qh) - return; - spin_lock_irqsave(&musb->lock, flags); + qh = hep->hcpriv; + if (qh == NULL) + goto exit; + switch (qh->type) { case USB_ENDPOINT_XFER_CONTROL: sched = &musb->control; @@ -2135,13 +2143,28 @@ musb_h_disable(struct usb_hcd *hcd, struct usb_host_endpoint *hep) /* cleanup */ musb_cleanup_urb(urb, qh, urb->pipe & USB_DIR_IN); - } else - urb = NULL; - /* then just nuke all the others */ - list_for_each_entry_safe_from(urb, tmp, &hep->urb_list, urb_list) - musb_giveback(qh, urb, -ESHUTDOWN); + /* Then nuke all the others ... and advance the + * queue on hw_ep (e.g. bulk ring) when we're done. + */ + while (!list_empty(&hep->urb_list)) { + urb = next_urb(qh); + urb->status = -ESHUTDOWN; + musb_advance_schedule(musb, urb, qh->hw_ep, is_in); + } + } else { + /* Just empty the queue; the hardware is busy with + * other transfers, and since !qh->is_ready nothing + * will activate any of these as it advances. + */ + while (!list_empty(&hep->urb_list)) + __musb_giveback(musb, next_urb(qh), -ESHUTDOWN); + hep->hcpriv = NULL; + list_del(&qh->ring); + kfree(qh); + } +exit: spin_unlock_irqrestore(&musb->lock, flags); } diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c index bfd0b68cecc..b7c132bded7 100644 --- a/drivers/usb/serial/option.c +++ b/drivers/usb/serial/option.c @@ -294,7 +294,11 @@ static int option_send_setup(struct tty_struct *tty, struct usb_serial_port *po /* Ericsson products */ #define ERICSSON_VENDOR_ID 0x0bdb -#define ERICSSON_PRODUCT_F3507G 0x1900 +#define ERICSSON_PRODUCT_F3507G_1 0x1900 +#define ERICSSON_PRODUCT_F3507G_2 0x1902 + +#define BENQ_VENDOR_ID 0x04a5 +#define BENQ_PRODUCT_H10 0x4068 static struct usb_device_id option_ids[] = { { USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) }, @@ -509,7 +513,10 @@ static struct usb_device_id option_ids[] = { { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF626) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) }, { USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) }, - { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G) }, + { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_1) }, + { USB_DEVICE(ERICSSON_VENDOR_ID, ERICSSON_PRODUCT_F3507G_2) }, + { USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) }, + { USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */ { } /* Terminating entry */ }; MODULE_DEVICE_TABLE(usb, option_ids); diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h index 50dc33a6065..6f59c8e510e 100644 --- a/drivers/usb/storage/unusual_devs.h +++ b/drivers/usb/storage/unusual_devs.h @@ -907,13 +907,13 @@ UNUSUAL_DEV( 0x05e3, 0x0701, 0x0000, 0xffff, "Genesys Logic", "USB to IDE Optical", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ), + US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ), UNUSUAL_DEV( 0x05e3, 0x0702, 0x0000, 0xffff, "Genesys Logic", "USB to IDE Disk", US_SC_DEVICE, US_PR_DEVICE, NULL, - US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 ), + US_FL_GO_SLOW | US_FL_MAX_SECTORS_64 | US_FL_IGNORE_RESIDUE ), /* Reported by Ben Efros <ben@pc-doctor.com> */ UNUSUAL_DEV( 0x05e3, 0x0723, 0x9451, 0x9451, diff --git a/drivers/w1/slaves/Kconfig b/drivers/w1/slaves/Kconfig index 8d0b1fb1e52..1f51366417b 100644 --- a/drivers/w1/slaves/Kconfig +++ b/drivers/w1/slaves/Kconfig @@ -16,6 +16,12 @@ config W1_SLAVE_SMEM Say Y here if you want to connect 1-wire simple 64bit memory rom(ds2401/ds2411/ds1990*) to your wire. +config W1_SLAVE_DS2431 + tristate "1kb EEPROM family support (DS2431)" + help + Say Y here if you want to use a 1-wire + 1kb EEPROM family device (DS2431) + config W1_SLAVE_DS2433 tristate "4kb EEPROM family support (DS2433)" help diff --git a/drivers/w1/slaves/Makefile b/drivers/w1/slaves/Makefile index 990f400b6d2..f1f51f19b12 100644 --- a/drivers/w1/slaves/Makefile +++ b/drivers/w1/slaves/Makefile @@ -4,6 +4,7 @@ obj-$(CONFIG_W1_SLAVE_THERM) += w1_therm.o obj-$(CONFIG_W1_SLAVE_SMEM) += w1_smem.o +obj-$(CONFIG_W1_SLAVE_DS2431) += w1_ds2431.o obj-$(CONFIG_W1_SLAVE_DS2433) += w1_ds2433.o obj-$(CONFIG_W1_SLAVE_DS2760) += w1_ds2760.o obj-$(CONFIG_W1_SLAVE_BQ27000) += w1_bq27000.o diff --git a/drivers/w1/slaves/w1_ds2433.c b/drivers/w1/slaves/w1_ds2433.c index 858c16a544c..13944714882 100644 --- a/drivers/w1/slaves/w1_ds2433.c +++ b/drivers/w1/slaves/w1_ds2433.c @@ -156,6 +156,9 @@ out_up: */ static int w1_f23_write(struct w1_slave *sl, int addr, int len, const u8 *data) { +#ifdef CONFIG_W1_SLAVE_DS2433_CRC + struct w1_f23_data *f23 = sl->family_data; +#endif u8 wrbuf[4]; u8 rdbuf[W1_PAGE_SIZE + 3]; u8 es = (addr + len - 1) & 0x1f; @@ -196,7 +199,9 @@ static int w1_f23_write(struct w1_slave *sl, int addr, int len, const u8 *data) /* Reset the bus to wake up the EEPROM (this may not be needed) */ w1_reset_bus(sl->master); - +#ifdef CONFIG_W1_SLAVE_DS2433_CRC + f23->validcrc &= ~(1 << (addr >> W1_PAGE_BITS)); +#endif return 0; } diff --git a/fs/compat_ioctl.c b/fs/compat_ioctl.c index 39bd4d38e88..45e59d3c7f1 100644 --- a/fs/compat_ioctl.c +++ b/fs/compat_ioctl.c @@ -1913,6 +1913,9 @@ COMPATIBLE_IOCTL(FIONREAD) /* This is also TIOCINQ */ /* 0x00 */ COMPATIBLE_IOCTL(FIBMAP) COMPATIBLE_IOCTL(FIGETBSZ) +/* 'X' - originally XFS but some now in the VFS */ +COMPATIBLE_IOCTL(FIFREEZE) +COMPATIBLE_IOCTL(FITHAW) /* RAID */ COMPATIBLE_IOCTL(RAID_VERSION) COMPATIBLE_IOCTL(GET_ARRAY_INFO) diff --git a/fs/dcache.c b/fs/dcache.c index 937df0fb0da..07e2d4a44bd 100644 --- a/fs/dcache.c +++ b/fs/dcache.c @@ -1180,7 +1180,7 @@ struct dentry *d_obtain_alias(struct inode *inode) iput(inode); return res; } -EXPORT_SYMBOL_GPL(d_obtain_alias); +EXPORT_SYMBOL(d_obtain_alias); /** * d_splice_alias - splice a disconnected dentry into the tree if one exists diff --git a/fs/jffs2/background.c b/fs/jffs2/background.c index 3cceef4ad2b..e9580104b6b 100644 --- a/fs/jffs2/background.c +++ b/fs/jffs2/background.c @@ -95,13 +95,17 @@ static int jffs2_garbage_collect_thread(void *_c) spin_unlock(&c->erase_completion_lock); - /* This thread is purely an optimisation. But if it runs when - other things could be running, it actually makes things a - lot worse. Use yield() and put it at the back of the runqueue - every time. Especially during boot, pulling an inode in - with read_inode() is much preferable to having the GC thread - get there first. */ - yield(); + /* Problem - immediately after bootup, the GCD spends a lot + * of time in places like jffs2_kill_fragtree(); so much so + * that userspace processes (like gdm and X) are starved + * despite plenty of cond_resched()s and renicing. Yield() + * doesn't help, either (presumably because userspace and GCD + * are generally competing for a higher latency resource - + * disk). + * This forces the GCD to slow the hell down. Pulling an + * inode in with read_inode() is much preferable to having + * the GC thread get there first. */ + schedule_timeout_interruptible(msecs_to_jiffies(50)); /* Put_super will send a SIGKILL and then wait on the sem. */ diff --git a/fs/jffs2/readinode.c b/fs/jffs2/readinode.c index 6ca08ad887c..1fc1e92356e 100644 --- a/fs/jffs2/readinode.c +++ b/fs/jffs2/readinode.c @@ -220,7 +220,7 @@ static int jffs2_add_tn_to_tree(struct jffs2_sb_info *c, struct jffs2_tmp_dnode_info *tn) { uint32_t fn_end = tn->fn->ofs + tn->fn->size; - struct jffs2_tmp_dnode_info *this; + struct jffs2_tmp_dnode_info *this, *ptn; dbg_readinode("insert fragment %#04x-%#04x, ver %u at %08x\n", tn->fn->ofs, fn_end, tn->version, ref_offset(tn->fn->raw)); @@ -251,11 +251,18 @@ static int jffs2_add_tn_to_tree(struct jffs2_sb_info *c, if (this) { /* If the node is coincident with another at a lower address, back up until the other node is found. It may be relevant */ - while (this->overlapped) - this = tn_prev(this); - - /* First node should never be marked overlapped */ - BUG_ON(!this); + while (this->overlapped) { + ptn = tn_prev(this); + if (!ptn) { + /* + * We killed a node which set the overlapped + * flags during the scan. Fix it up. + */ + this->overlapped = 0; + break; + } + this = ptn; + } dbg_readinode("'this' found %#04x-%#04x (%s)\n", this->fn->ofs, this->fn->ofs + this->fn->size, this->fn ? "data" : "hole"); } @@ -360,7 +367,17 @@ static int jffs2_add_tn_to_tree(struct jffs2_sb_info *c, } if (!this->overlapped) break; - this = tn_prev(this); + + ptn = tn_prev(this); + if (!ptn) { + /* + * We killed a node which set the overlapped + * flags during the scan. Fix it up. + */ + this->overlapped = 0; + break; + } + this = ptn; } } @@ -456,8 +473,15 @@ static int jffs2_build_inode_fragtree(struct jffs2_sb_info *c, eat_last(&rii->tn_root, &last->rb); ver_insert(&ver_root, last); - if (unlikely(last->overlapped)) - continue; + if (unlikely(last->overlapped)) { + if (pen) + continue; + /* + * We killed a node which set the overlapped + * flags during the scan. Fix it up. + */ + last->overlapped = 0; + } /* Now we have a bunch of nodes in reverse version order, in the tree at ver_root. Most of the time, diff --git a/fs/ocfs2/alloc.c b/fs/ocfs2/alloc.c index 60fe74035db..3a9e5deed74 100644 --- a/fs/ocfs2/alloc.c +++ b/fs/ocfs2/alloc.c @@ -4796,6 +4796,29 @@ out: return ret; } +static int ocfs2_replace_extent_rec(struct inode *inode, + handle_t *handle, + struct ocfs2_path *path, + struct ocfs2_extent_list *el, + int split_index, + struct ocfs2_extent_rec *split_rec) +{ + int ret; + + ret = ocfs2_path_bh_journal_access(handle, inode, path, + path_num_items(path) - 1); + if (ret) { + mlog_errno(ret); + goto out; + } + + el->l_recs[split_index] = *split_rec; + + ocfs2_journal_dirty(handle, path_leaf_bh(path)); +out: + return ret; +} + /* * Mark part or all of the extent record at split_index in the leaf * pointed to by path as written. This removes the unwritten @@ -4885,7 +4908,9 @@ static int __ocfs2_mark_extent_written(struct inode *inode, if (ctxt.c_contig_type == CONTIG_NONE) { if (ctxt.c_split_covers_rec) - el->l_recs[split_index] = *split_rec; + ret = ocfs2_replace_extent_rec(inode, handle, + path, el, + split_index, split_rec); else ret = ocfs2_split_and_insert(inode, handle, path, et, &last_eb_bh, split_index, diff --git a/fs/ocfs2/dlm/dlmmaster.c b/fs/ocfs2/dlm/dlmmaster.c index 54e182a27ca..0a281394785 100644 --- a/fs/ocfs2/dlm/dlmmaster.c +++ b/fs/ocfs2/dlm/dlmmaster.c @@ -1849,12 +1849,12 @@ int dlm_assert_master_handler(struct o2net_msg *msg, u32 len, void *data, if (!mle) { if (res->owner != DLM_LOCK_RES_OWNER_UNKNOWN && res->owner != assert->node_idx) { - mlog(ML_ERROR, "assert_master from " - "%u, but current owner is " - "%u! (%.*s)\n", - assert->node_idx, res->owner, - namelen, name); - goto kill; + mlog(ML_ERROR, "DIE! Mastery assert from %u, " + "but current owner is %u! (%.*s)\n", + assert->node_idx, res->owner, namelen, + name); + __dlm_print_one_lock_resource(res); + BUG(); } } else if (mle->type != DLM_MLE_MIGRATION) { if (res->owner != DLM_LOCK_RES_OWNER_UNKNOWN) { diff --git a/fs/ocfs2/dlm/dlmthread.c b/fs/ocfs2/dlm/dlmthread.c index d1295203029..4060bb328bc 100644 --- a/fs/ocfs2/dlm/dlmthread.c +++ b/fs/ocfs2/dlm/dlmthread.c @@ -181,8 +181,7 @@ static int dlm_purge_lockres(struct dlm_ctxt *dlm, spin_lock(&res->spinlock); /* This ensures that clear refmap is sent after the set */ - __dlm_wait_on_lockres_flags(res, (DLM_LOCK_RES_SETREF_INPROG | - DLM_LOCK_RES_MIGRATING)); + __dlm_wait_on_lockres_flags(res, DLM_LOCK_RES_SETREF_INPROG); spin_unlock(&res->spinlock); /* clear our bit from the master's refmap, ignore errors */ diff --git a/fs/ocfs2/dlm/dlmunlock.c b/fs/ocfs2/dlm/dlmunlock.c index 86ca085ef32..fcf879ed693 100644 --- a/fs/ocfs2/dlm/dlmunlock.c +++ b/fs/ocfs2/dlm/dlmunlock.c @@ -117,11 +117,11 @@ static enum dlm_status dlmunlock_common(struct dlm_ctxt *dlm, else BUG_ON(res->owner == dlm->node_num); - spin_lock(&dlm->spinlock); + spin_lock(&dlm->ast_lock); /* We want to be sure that we're not freeing a lock * that still has AST's pending... */ in_use = !list_empty(&lock->ast_list); - spin_unlock(&dlm->spinlock); + spin_unlock(&dlm->ast_lock); if (in_use) { mlog(ML_ERROR, "lockres %.*s: Someone is calling dlmunlock " "while waiting for an ast!", res->lockname.len, diff --git a/fs/ocfs2/dlmglue.c b/fs/ocfs2/dlmglue.c index 206a2370876..7219a86d34c 100644 --- a/fs/ocfs2/dlmglue.c +++ b/fs/ocfs2/dlmglue.c @@ -320,9 +320,14 @@ static void ocfs2_schedule_blocked_lock(struct ocfs2_super *osb, struct ocfs2_lock_res *lockres); static inline void ocfs2_recover_from_dlm_error(struct ocfs2_lock_res *lockres, int convert); -#define ocfs2_log_dlm_error(_func, _err, _lockres) do { \ - mlog(ML_ERROR, "DLM error %d while calling %s on resource %s\n", \ - _err, _func, _lockres->l_name); \ +#define ocfs2_log_dlm_error(_func, _err, _lockres) do { \ + if ((_lockres)->l_type != OCFS2_LOCK_TYPE_DENTRY) \ + mlog(ML_ERROR, "DLM error %d while calling %s on resource %s\n", \ + _err, _func, _lockres->l_name); \ + else \ + mlog(ML_ERROR, "DLM error %d while calling %s on resource %.*s%08x\n", \ + _err, _func, OCFS2_DENTRY_LOCK_INO_START - 1, (_lockres)->l_name, \ + (unsigned int)ocfs2_get_dentry_lock_ino(_lockres)); \ } while (0) static int ocfs2_downconvert_thread(void *arg); static void ocfs2_downconvert_on_unlock(struct ocfs2_super *osb, diff --git a/fs/ocfs2/ocfs2.h b/fs/ocfs2/ocfs2.h index 077384135f4..946d3c34b90 100644 --- a/fs/ocfs2/ocfs2.h +++ b/fs/ocfs2/ocfs2.h @@ -341,6 +341,9 @@ struct ocfs2_super struct ocfs2_node_map osb_recovering_orphan_dirs; unsigned int *osb_orphan_wipes; wait_queue_head_t osb_wipe_event; + + /* used to protect metaecc calculation check of xattr. */ + spinlock_t osb_xattr_lock; }; #define OCFS2_SB(sb) ((struct ocfs2_super *)(sb)->s_fs_info) diff --git a/fs/ocfs2/super.c b/fs/ocfs2/super.c index b1cb38fbe80..7ac83a81ee5 100644 --- a/fs/ocfs2/super.c +++ b/fs/ocfs2/super.c @@ -1537,6 +1537,13 @@ static int ocfs2_get_sector(struct super_block *sb, unlock_buffer(*bh); ll_rw_block(READ, 1, bh); wait_on_buffer(*bh); + if (!buffer_uptodate(*bh)) { + mlog_errno(-EIO); + brelse(*bh); + *bh = NULL; + return -EIO; + } + return 0; } @@ -1747,6 +1754,7 @@ static int ocfs2_initialize_super(struct super_block *sb, INIT_LIST_HEAD(&osb->blocked_lock_list); osb->blocked_lock_count = 0; spin_lock_init(&osb->osb_lock); + spin_lock_init(&osb->osb_xattr_lock); ocfs2_init_inode_steal_slot(osb); atomic_set(&osb->alloc_stats.moves, 0); diff --git a/fs/ocfs2/xattr.c b/fs/ocfs2/xattr.c index 915039fffe6..4ddd788add6 100644 --- a/fs/ocfs2/xattr.c +++ b/fs/ocfs2/xattr.c @@ -82,13 +82,14 @@ struct ocfs2_xattr_set_ctxt { #define OCFS2_XATTR_ROOT_SIZE (sizeof(struct ocfs2_xattr_def_value_root)) #define OCFS2_XATTR_INLINE_SIZE 80 +#define OCFS2_XATTR_HEADER_GAP 4 #define OCFS2_XATTR_FREE_IN_IBODY (OCFS2_MIN_XATTR_INLINE_SIZE \ - sizeof(struct ocfs2_xattr_header) \ - - sizeof(__u32)) + - OCFS2_XATTR_HEADER_GAP) #define OCFS2_XATTR_FREE_IN_BLOCK(ptr) ((ptr)->i_sb->s_blocksize \ - sizeof(struct ocfs2_xattr_block) \ - sizeof(struct ocfs2_xattr_header) \ - - sizeof(__u32)) + - OCFS2_XATTR_HEADER_GAP) static struct ocfs2_xattr_def_value_root def_xv = { .xv.xr_list.l_count = cpu_to_le16(1), @@ -274,10 +275,12 @@ static int ocfs2_read_xattr_bucket(struct ocfs2_xattr_bucket *bucket, bucket->bu_blocks, bucket->bu_bhs, 0, NULL); if (!rc) { + spin_lock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock); rc = ocfs2_validate_meta_ecc_bhs(bucket->bu_inode->i_sb, bucket->bu_bhs, bucket->bu_blocks, &bucket_xh(bucket)->xh_check); + spin_unlock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock); if (rc) mlog_errno(rc); } @@ -310,9 +313,11 @@ static void ocfs2_xattr_bucket_journal_dirty(handle_t *handle, { int i; + spin_lock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock); ocfs2_compute_meta_ecc_bhs(bucket->bu_inode->i_sb, bucket->bu_bhs, bucket->bu_blocks, &bucket_xh(bucket)->xh_check); + spin_unlock(&OCFS2_SB(bucket->bu_inode->i_sb)->osb_xattr_lock); for (i = 0; i < bucket->bu_blocks; i++) ocfs2_journal_dirty(handle, bucket->bu_bhs[i]); @@ -1507,7 +1512,7 @@ static int ocfs2_xattr_set_entry(struct inode *inode, last += 1; } - free = min_offs - ((void *)last - xs->base) - sizeof(__u32); + free = min_offs - ((void *)last - xs->base) - OCFS2_XATTR_HEADER_GAP; if (free < 0) return -EIO; @@ -2190,7 +2195,7 @@ static int ocfs2_xattr_can_be_in_inode(struct inode *inode, last += 1; } - free = min_offs - ((void *)last - xs->base) - sizeof(__u32); + free = min_offs - ((void *)last - xs->base) - OCFS2_XATTR_HEADER_GAP; if (free < 0) return 0; @@ -2592,8 +2597,9 @@ static int __ocfs2_xattr_set_handle(struct inode *inode, if (!ret) { /* Update inode ctime. */ - ret = ocfs2_journal_access(ctxt->handle, inode, xis->inode_bh, - OCFS2_JOURNAL_ACCESS_WRITE); + ret = ocfs2_journal_access_di(ctxt->handle, inode, + xis->inode_bh, + OCFS2_JOURNAL_ACCESS_WRITE); if (ret) { mlog_errno(ret); goto out; @@ -5060,8 +5066,8 @@ try_again: xh_free_start = le16_to_cpu(xh->xh_free_start); header_size = sizeof(struct ocfs2_xattr_header) + count * sizeof(struct ocfs2_xattr_entry); - max_free = OCFS2_XATTR_BUCKET_SIZE - - le16_to_cpu(xh->xh_name_value_len) - header_size; + max_free = OCFS2_XATTR_BUCKET_SIZE - header_size - + le16_to_cpu(xh->xh_name_value_len) - OCFS2_XATTR_HEADER_GAP; mlog_bug_on_msg(header_size > blocksize, "bucket %llu has header size " "of %u which exceed block size\n", @@ -5094,7 +5100,7 @@ try_again: need = 0; } - free = xh_free_start - header_size; + free = xh_free_start - header_size - OCFS2_XATTR_HEADER_GAP; /* * We need to make sure the new name/value pair * can exist in the same block. @@ -5127,7 +5133,8 @@ try_again: } xh_free_start = le16_to_cpu(xh->xh_free_start); - free = xh_free_start - header_size; + free = xh_free_start - header_size + - OCFS2_XATTR_HEADER_GAP; if (xh_free_start % blocksize < need) free -= xh_free_start % blocksize; diff --git a/include/linux/io-mapping.h b/include/linux/io-mapping.h index 82df31726a5..cbc2f0cd631 100644 --- a/include/linux/io-mapping.h +++ b/include/linux/io-mapping.h @@ -30,11 +30,14 @@ * See Documentation/io_mapping.txt */ -/* this struct isn't actually defined anywhere */ -struct io_mapping; - #ifdef CONFIG_HAVE_ATOMIC_IOMAP +struct io_mapping { + resource_size_t base; + unsigned long size; + pgprot_t prot; +}; + /* * For small address space machines, mapping large objects * into the kernel virtual space isn't practical. Where @@ -43,23 +46,40 @@ struct io_mapping; */ static inline struct io_mapping * -io_mapping_create_wc(unsigned long base, unsigned long size) +io_mapping_create_wc(resource_size_t base, unsigned long size) { - return (struct io_mapping *) base; + struct io_mapping *iomap; + + if (!is_io_mapping_possible(base, size)) + return NULL; + + iomap = kmalloc(sizeof(*iomap), GFP_KERNEL); + if (!iomap) + return NULL; + + iomap->base = base; + iomap->size = size; + iomap->prot = pgprot_writecombine(__pgprot(__PAGE_KERNEL)); + return iomap; } static inline void io_mapping_free(struct io_mapping *mapping) { + kfree(mapping); } /* Atomic map/unmap */ static inline void * io_mapping_map_atomic_wc(struct io_mapping *mapping, unsigned long offset) { - offset += (unsigned long) mapping; - return iomap_atomic_prot_pfn(offset >> PAGE_SHIFT, KM_USER0, - __pgprot(__PAGE_KERNEL_WC)); + resource_size_t phys_addr; + unsigned long pfn; + + BUG_ON(offset >= mapping->size); + phys_addr = mapping->base + offset; + pfn = (unsigned long) (phys_addr >> PAGE_SHIFT); + return iomap_atomic_prot_pfn(pfn, KM_USER0, mapping->prot); } static inline void @@ -71,8 +91,9 @@ io_mapping_unmap_atomic(void *vaddr) static inline void * io_mapping_map_wc(struct io_mapping *mapping, unsigned long offset) { - offset += (unsigned long) mapping; - return ioremap_wc(offset, PAGE_SIZE); + BUG_ON(offset >= mapping->size); + resource_size_t phys_addr = mapping->base + offset; + return ioremap_wc(phys_addr, PAGE_SIZE); } static inline void @@ -83,9 +104,12 @@ io_mapping_unmap(void *vaddr) #else +/* this struct isn't actually defined anywhere */ +struct io_mapping; + /* Create the io_mapping object*/ static inline struct io_mapping * -io_mapping_create_wc(unsigned long base, unsigned long size) +io_mapping_create_wc(resource_size_t base, unsigned long size) { return (struct io_mapping *) ioremap_wc(base, size); } diff --git a/include/linux/user_namespace.h b/include/linux/user_namespace.h index 315bcd37522..cc4f45361db 100644 --- a/include/linux/user_namespace.h +++ b/include/linux/user_namespace.h @@ -13,6 +13,7 @@ struct user_namespace { struct kref kref; struct hlist_head uidhash_table[UIDHASH_SZ]; struct user_struct *creator; + struct work_struct destroyer; }; extern struct user_namespace init_user_ns; diff --git a/kernel/user_namespace.c b/kernel/user_namespace.c index 79084311ee5..076c7c8215b 100644 --- a/kernel/user_namespace.c +++ b/kernel/user_namespace.c @@ -60,12 +60,25 @@ int create_user_ns(struct cred *new) return 0; } -void free_user_ns(struct kref *kref) +/* + * Deferred destructor for a user namespace. This is required because + * free_user_ns() may be called with uidhash_lock held, but we need to call + * back to free_uid() which will want to take the lock again. + */ +static void free_user_ns_work(struct work_struct *work) { - struct user_namespace *ns; - - ns = container_of(kref, struct user_namespace, kref); + struct user_namespace *ns = + container_of(work, struct user_namespace, destroyer); free_uid(ns->creator); kfree(ns); } + +void free_user_ns(struct kref *kref) +{ + struct user_namespace *ns = + container_of(kref, struct user_namespace, kref); + + INIT_WORK(&ns->destroyer, free_user_ns_work); + schedule_work(&ns->destroyer); +} EXPORT_SYMBOL(free_user_ns); diff --git a/mm/vmalloc.c b/mm/vmalloc.c index 903cad46e79..520a7598026 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -323,6 +323,7 @@ static struct vmap_area *alloc_vmap_area(unsigned long size, unsigned long addr; int purged = 0; + BUG_ON(!size); BUG_ON(size & ~PAGE_MASK); va = kmalloc_node(sizeof(struct vmap_area), @@ -334,6 +335,9 @@ retry: addr = ALIGN(vstart, align); spin_lock(&vmap_area_lock); + if (addr + size - 1 < addr) + goto overflow; + /* XXX: could have a last_hole cache */ n = vmap_area_root.rb_node; if (n) { @@ -365,6 +369,8 @@ retry: while (addr + size > first->va_start && addr + size <= vend) { addr = ALIGN(first->va_end + PAGE_SIZE, align); + if (addr + size - 1 < addr) + goto overflow; n = rb_next(&first->rb_node); if (n) @@ -375,6 +381,7 @@ retry: } found: if (addr + size > vend) { +overflow: spin_unlock(&vmap_area_lock); if (!purged) { purge_vmap_area_lazy(); @@ -498,6 +505,7 @@ static void __purge_vmap_area_lazy(unsigned long *start, unsigned long *end, static DEFINE_SPINLOCK(purge_lock); LIST_HEAD(valist); struct vmap_area *va; + struct vmap_area *n_va; int nr = 0; /* @@ -537,7 +545,7 @@ static void __purge_vmap_area_lazy(unsigned long *start, unsigned long *end, if (nr) { spin_lock(&vmap_area_lock); - list_for_each_entry(va, &valist, purge_list) + list_for_each_entry_safe(va, n_va, &valist, purge_list) __free_vmap_area(va); spin_unlock(&vmap_area_lock); } diff --git a/scripts/checkpatch.pl b/scripts/checkpatch.pl index 45eb0ae98eb..2d5ece798c4 100755 --- a/scripts/checkpatch.pl +++ b/scripts/checkpatch.pl @@ -10,7 +10,7 @@ use strict; my $P = $0; $P =~ s@.*/@@g; -my $V = '0.27'; +my $V = '0.28'; use Getopt::Long qw(:config no_auto_abbrev); @@ -110,7 +110,8 @@ our $Sparse = qr{ __iomem| __must_check| __init_refok| - __kprobes + __kprobes| + __ref }x; our $Attribute = qr{ const| @@ -1240,7 +1241,8 @@ sub process { $realfile =~ s@^([^/]*)/@@; $p1_prefix = $1; - if ($tree && $p1_prefix ne '' && -e "$root/$p1_prefix") { + if (!$file && $tree && $p1_prefix ne '' && + -e "$root/$p1_prefix") { WARN("patch prefix '$p1_prefix' exists, appears to be a -p0 patch\n"); } @@ -1583,9 +1585,9 @@ sub process { } # TEST: allow direct testing of the attribute matcher. if ($dbg_attr) { - if ($line =~ /^.\s*$Attribute\s*$/) { + if ($line =~ /^.\s*$Modifier\s*$/) { ERROR("TEST: is attr\n" . $herecurr); - } elsif ($dbg_attr > 1 && $line =~ /^.+($Attribute)/) { + } elsif ($dbg_attr > 1 && $line =~ /^.+($Modifier)/) { ERROR("TEST: is not attr ($1 is)\n". $herecurr); } next; @@ -1657,7 +1659,7 @@ sub process { # * goes on variable not on type # (char*[ const]) - if ($line =~ m{\($NonptrType(\s*\*[\s\*]*(?:$Modifier\s*)*)\)}) { + if ($line =~ m{\($NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)\)}) { my ($from, $to) = ($1, $1); # Should start with a space. @@ -1672,7 +1674,7 @@ sub process { if ($from ne $to) { ERROR("\"(foo$from)\" should be \"(foo$to)\"\n" . $herecurr); } - } elsif ($line =~ m{\b$NonptrType(\s*\*[\s\*]*(?:$Modifier\s*)?)($Ident)}) { + } elsif ($line =~ m{\b$NonptrType(\s*(?:$Modifier\b\s*|\*\s*)+)($Ident)}) { my ($from, $to, $ident) = ($1, $1, $2); # Should start with a space. @@ -1685,8 +1687,8 @@ sub process { # Modifiers should have spaces. $to =~ s/(\b$Modifier$)/$1 /; - #print "from<$from> to<$to>\n"; - if ($from ne $to) { + #print "from<$from> to<$to> ident<$ident>\n"; + if ($from ne $to && $ident !~ /^$Modifier$/) { ERROR("\"foo${from}bar\" should be \"foo${to}bar\"\n" . $herecurr); } } @@ -1885,11 +1887,11 @@ sub process { if ($ctx !~ /[WEBC]x./ && $ca !~ /(?:\)|!|~|\*|-|\&|\||\+\+|\-\-|\{)$/) { ERROR("space required before that '$op' $at\n" . $hereptr); } - if ($op eq '*' && $cc =~/\s*const\b/) { + if ($op eq '*' && $cc =~/\s*$Modifier\b/) { # A unary '*' may be const } elsif ($ctx =~ /.xW/) { - ERROR("space prohibited after that '$op' $at\n" . $hereptr); + ERROR("Aspace prohibited after that '$op' $at\n" . $hereptr); } # unary ++ and unary -- are allowed no space on one side. @@ -2560,7 +2562,7 @@ sub process { if ($line =~ /\bin_atomic\s*\(/) { if ($realfile =~ m@^drivers/@) { ERROR("do not use in_atomic in drivers\n" . $herecurr); - } else { + } elsif ($realfile !~ m@^kernel/@) { WARN("use of in_atomic() is incorrect outside core kernel code\n" . $herecurr); } } |