aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/ide/ide.txt33
-rw-r--r--drivers/ide/ide-generic.c3
-rw-r--r--drivers/ide/ide-probe.c3
-rw-r--r--drivers/ide/ide-proc.c3
-rw-r--r--drivers/ide/ide.c41
-rw-r--r--drivers/ide/pci/cmd640.c2
-rw-r--r--drivers/ide/setup-pci.c11
-rw-r--r--include/linux/ide.h2
8 files changed, 17 insertions, 81 deletions
diff --git a/Documentation/ide/ide.txt b/Documentation/ide/ide.txt
index ae4f4f43c25..18c02df2f78 100644
--- a/Documentation/ide/ide.txt
+++ b/Documentation/ide/ide.txt
@@ -71,29 +71,6 @@ This driver automatically probes for most IDE interfaces (including all PCI
ones), for the drives/geometries attached to those interfaces, and for the IRQ
lines being used by the interfaces (normally 14, 15 for ide0/ide1).
-For special cases, interfaces may be specified using kernel "command line"
-options. For example,
-
- ide3=0x168,0x36e,10 /* ioports 0x168-0x16f,0x36e, irq 10 */
-
-Normally the irq number need not be specified, as ide.c will probe for it:
-
- ide3=0x168,0x36e /* ioports 0x168-0x16f,0x36e */
-
-The standard port, and irq values are these:
-
- ide0=0x1f0,0x3f6,14
- ide1=0x170,0x376,15
- ide2=0x1e8,0x3ee,11
- ide3=0x168,0x36e,10
-
-Note that the first parameter reserves 8 contiguous ioports, whereas the
-second value denotes a single ioport. If in doubt, do a 'cat /proc/ioports'.
-
-In all probability the device uses these ports and IRQs if it is attached
-to the appropriate ide channel. Pass the parameter for the correct ide
-channel to the kernel, as explained above.
-
Any number of interfaces may share a single IRQ if necessary, at a slight
performance penalty, whether on separate cards or a single VLB card.
The IDE driver automatically detects and handles this. However, this may
@@ -199,7 +176,7 @@ When ide.c is used as a module, you can pass command line parameters to the
driver using the "options=" keyword to insmod, while replacing any ',' with
';'. For example:
- insmod ide.o options="ide0=serialize ide1=serialize ide2=0x1e8;0x3ee;11"
+ insmod ide.o options="hda=nodma hdb=nodma"
================================================================================
@@ -240,14 +217,6 @@ Summary of ide driver parameters for kernel command line
As for VLB, it is safest to not specify it.
Bigger values are safer than smaller ones.
- "idex=base" : probe for an interface at the addr specified,
- where "base" is usually 0x1f0 or 0x170
- and "ctl" is assumed to be "base"+0x206
-
- "idex=base,ctl" : specify both base and ctl
-
- "idex=base,ctl,irq" : specify base, ctl, and irq number
-
"idex=serialize" : do not overlap operations on idex. Please note
that you will have to specify this option for
both the respective primary and secondary channel
diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c
index 387574fe4b2..bae41459192 100644
--- a/drivers/ide/ide-generic.c
+++ b/drivers/ide/ide-generic.c
@@ -93,8 +93,7 @@ static int __init ide_generic_init(void)
ide_hwif_t *hwif = &ide_hwifs[i];
if (hwif->io_ports[IDE_DATA_OFFSET] &&
- (hwif->chipset == ide_unknown ||
- hwif->chipset == ide_forced))
+ hwif->chipset == ide_unknown)
idx[i] = i;
else
idx[i] = 0xff;
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 8ef5194f6d4..33cb5e5a249 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -1519,8 +1519,7 @@ int ide_device_add_all(u8 *idx, const struct ide_port_info *d)
hwif = &ide_hwifs[idx[i]];
if (hwif->present) {
- if (hwif->chipset == ide_unknown ||
- hwif->chipset == ide_forced)
+ if (hwif->chipset == ide_unknown)
hwif->chipset = ide_generic;
hwif_register_devices(hwif);
}
diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c
index 77025d1057b..edd7f186dc4 100644
--- a/drivers/ide/ide-proc.c
+++ b/drivers/ide/ide-proc.c
@@ -46,9 +46,6 @@ static int proc_ide_read_imodel
int len;
const char *name;
- /*
- * Neither ide_unknown nor ide_forced should be set at this point.
- */
switch (hwif->chipset) {
case ide_generic: name = "generic"; break;
case ide_pci: name = "pci"; break;
diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c
index 96126b3b12e..7e789c97a8b 100644
--- a/drivers/ide/ide.c
+++ b/drivers/ide/ide.c
@@ -1170,7 +1170,7 @@ extern int probe_ht6560b;
extern int probe_qd65xx;
extern int cmd640_vlb;
-static int __initdata is_chipset_set[MAX_HWIFS];
+static int __initdata is_chipset_set;
/*
* ide_setup() gets called VERY EARLY during initialization,
@@ -1328,8 +1328,6 @@ static int __init ide_setup(char *s)
"minus10", "four", "qd65xx", "ht6560b", "cmd640_vlb",
"dtc2278", "umc8672", "ali14xx", NULL };
- hw_regs_t hwregs;
-
hw = s[3] - '0';
hwif = &ide_hwifs[hw];
i = match_parm(&s[4], ide_words, vals, 3);
@@ -1338,19 +1336,14 @@ static int __init ide_setup(char *s)
* Cryptic check to ensure chipset not already set for hwif.
* Note: we can't depend on hwif->chipset here.
*/
- if ((i >= -18 && i <= -11) || (i > 0 && i <= 3)) {
+ if (i >= -18 && i <= -11) {
/* chipset already specified */
- if (is_chipset_set[hw])
+ if (is_chipset_set)
goto bad_option;
- if (i > -18 && i <= -11) {
- /* these drivers are for "ide0=" only */
- if (hw != 0)
- goto bad_hwif;
- /* chipset already specified for 2nd port */
- if (is_chipset_set[hw+1])
- goto bad_option;
- }
- is_chipset_set[hw] = 1;
+ /* these drivers are for "ide0=" only */
+ if (hw != 0)
+ goto bad_hwif;
+ is_chipset_set = 1;
printk("\n");
}
@@ -1430,21 +1423,11 @@ static int __init ide_setup(char *s)
case -1: /* "noprobe" */
hwif->noprobe = 1;
goto obsolete_option;
-
- case 1: /* base */
- vals[1] = vals[0] + 0x206; /* default ctl */
- case 2: /* base,ctl */
- vals[2] = 0; /* default irq = probe for it */
- case 3: /* base,ctl,irq */
- memset(&hwregs, 0, sizeof(hwregs));
- ide_init_hwif_ports(&hwregs, vals[0], vals[1], &hwif->irq);
- memcpy(hwif->io_ports, hwregs.io_ports, sizeof(hwif->io_ports));
- hwif->irq = vals[2];
- hwif->noprobe = 0;
- hwif->chipset = ide_forced;
- goto obsolete_option;
-
- case 0: goto bad_option;
+ case 0:
+ case 1:
+ case 2:
+ case 3:
+ goto bad_option;
default:
printk(" -- SUPPORT NOT CONFIGURED IN THIS KERNEL\n");
return 1;
diff --git a/drivers/ide/pci/cmd640.c b/drivers/ide/pci/cmd640.c
index 29fbc5ead03..58a95f62e38 100644
--- a/drivers/ide/pci/cmd640.c
+++ b/drivers/ide/pci/cmd640.c
@@ -415,7 +415,7 @@ static void __init setup_device_ptrs (void)
cmd_hwif1 = &ide_hwifs[1]; /* default, if not found below */
for (i = 0; i < MAX_HWIFS; i++) {
ide_hwif_t *hwif = &ide_hwifs[i];
- if (hwif->chipset == ide_unknown || hwif->chipset == ide_forced) {
+ if (hwif->chipset == ide_unknown) {
if (hwif->io_ports[IDE_DATA_OFFSET] == 0x1f0)
cmd_hwif0 = hwif;
else if (hwif->io_ports[IDE_DATA_OFFSET] == 0x170)
diff --git a/drivers/ide/setup-pci.c b/drivers/ide/setup-pci.c
index 634e3f6a960..ea66c996e4e 100644
--- a/drivers/ide/setup-pci.c
+++ b/drivers/ide/setup-pci.c
@@ -41,17 +41,6 @@ static ide_hwif_t *ide_match_hwif(unsigned long io_base, u8 bootable, const char
ide_hwif_t *hwif;
/*
- * Look for a hwif with matching io_base specified using
- * parameters to ide_setup().
- */
- for (h = 0; h < MAX_HWIFS; ++h) {
- hwif = &ide_hwifs[h];
- if (hwif->io_ports[IDE_DATA_OFFSET] == io_base) {
- if (hwif->chipset == ide_forced)
- return hwif; /* a perfect match */
- }
- }
- /*
* Look for a hwif with matching io_base default value.
* If chipset is "ide_unknown", then claim that hwif slot.
* Otherwise, some other chipset has already claimed it.. :(
diff --git a/include/linux/ide.h b/include/linux/ide.h
index 9cebf305408..67f83c60845 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -169,7 +169,7 @@ enum { ide_unknown, ide_generic, ide_pci,
ide_rz1000, ide_trm290,
ide_cmd646, ide_cy82c693, ide_4drives,
ide_pmac, ide_etrax100, ide_acorn,
- ide_au1xxx, ide_palm3710, ide_forced
+ ide_au1xxx, ide_palm3710
};
typedef u8 hwif_chipset_t;