diff options
23 files changed, 480 insertions, 680 deletions
diff --git a/arch/arm/mach-omap1/board-fsample.c b/arch/arm/mach-omap1/board-fsample.c index a7ead1b9322..74720e65f11 100644 --- a/arch/arm/mach-omap1/board-fsample.c +++ b/arch/arm/mach-omap1/board-fsample.c @@ -107,7 +107,7 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = INT_730_MPU_EXT_NIRQ, + .start = INT_7XX_MPU_EXT_NIRQ, .end = 0, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, @@ -196,8 +196,8 @@ static struct platform_device smc91x_device = { static struct resource kp_resources[] = { [0] = { - .start = INT_730_MPUIO_KEYPAD, - .end = INT_730_MPUIO_KEYPAD, + .start = INT_7XX_MPUIO_KEYPAD, + .end = INT_7XX_MPUIO_KEYPAD, .flags = IORESOURCE_IRQ, }, }; @@ -309,7 +309,7 @@ static void __init omap_fsample_map_io(void) /* * Hold GSM Reset until needed */ - omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL); + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); /* * UARTs -> done automagically by 8250 driver @@ -320,21 +320,21 @@ static void __init omap_fsample_map_io(void) */ /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0); - omap_writel(0x00000088, OMAP730_FLASH_ACFG_0); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); /* * Ethernet support through the debug board * CS1 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1); - omap_writel(0x00000000, OMAP730_FLASH_ACFG_1); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); /* * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, * It is used as the Ethernet controller interrupt */ - omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_FSAMPLE, "OMAP730 F-Sample") diff --git a/arch/arm/mach-omap1/board-perseus2.c b/arch/arm/mach-omap1/board-perseus2.c index 83406699f31..2f897cf2350 100644 --- a/arch/arm/mach-omap1/board-perseus2.c +++ b/arch/arm/mach-omap1/board-perseus2.c @@ -74,7 +74,7 @@ static struct resource smc91x_resources[] = { .flags = IORESOURCE_MEM, }, [1] = { - .start = INT_730_MPU_EXT_NIRQ, + .start = INT_7XX_MPU_EXT_NIRQ, .end = 0, .flags = IORESOURCE_IRQ | IORESOURCE_IRQ_HIGHEDGE, }, @@ -163,8 +163,8 @@ static struct platform_device smc91x_device = { static struct resource kp_resources[] = { [0] = { - .start = INT_730_MPUIO_KEYPAD, - .end = INT_730_MPUIO_KEYPAD, + .start = INT_7XX_MPUIO_KEYPAD, + .end = INT_7XX_MPUIO_KEYPAD, .flags = IORESOURCE_IRQ, }, }; @@ -270,7 +270,7 @@ static void __init omap_perseus2_map_io(void) /* * Hold GSM Reset until needed */ - omap_writew(omap_readw(OMAP730_DSP_M_CTL) & ~1, OMAP730_DSP_M_CTL); + omap_writew(omap_readw(OMAP7XX_DSP_M_CTL) & ~1, OMAP7XX_DSP_M_CTL); /* * UARTs -> done automagically by 8250 driver @@ -281,21 +281,21 @@ static void __init omap_perseus2_map_io(void) */ /* Flash: CS0 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_0); - omap_writel(0x00000088, OMAP730_FLASH_ACFG_0); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_0); + omap_writel(0x00000088, OMAP7XX_FLASH_ACFG_0); /* * Ethernet support through the debug board * CS1 timings setup */ - omap_writel(0x0000fff3, OMAP730_FLASH_CFG_1); - omap_writel(0x00000000, OMAP730_FLASH_ACFG_1); + omap_writel(0x0000fff3, OMAP7XX_FLASH_CFG_1); + omap_writel(0x00000000, OMAP7XX_FLASH_ACFG_1); /* * Configure MPU_EXT_NIRQ IO in IO_CONF9 register, * It is used as the Ethernet controller interrupt */ - omap_writel(omap_readl(OMAP730_IO_CONF_9) & 0x1FFFFFFF, OMAP730_IO_CONF_9); + omap_writel(omap_readl(OMAP7XX_IO_CONF_9) & 0x1FFFFFFF, OMAP7XX_IO_CONF_9); } MACHINE_START(OMAP_PERSEUS2, "OMAP730 Perseus2") diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index 436eed22801..5f77b8355b4 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -69,13 +69,13 @@ struct omap_clk { } #define CK_310 (1 << 0) -#define CK_730 (1 << 1) +#define CK_7XX (1 << 1) #define CK_1510 (1 << 2) #define CK_16XX (1 << 3) static struct omap_clk omap_clks[] = { /* non-ULPD clocks */ - CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "ck_ref", &ck_ref, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "ck_dpll1", &ck_dpll1, CK_16XX | CK_1510 | CK_310), /* CK_GEN1 clocks */ CLK(NULL, "ck_dpll1out", &ck_dpll1out.clk, CK_16XX), @@ -83,7 +83,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "arm_ck", &arm_ck, CK_16XX | CK_1510 | CK_310), CLK(NULL, "armper_ck", &armper_ck.clk, CK_16XX | CK_1510 | CK_310), CLK(NULL, "arm_gpio_ck", &arm_gpio_ck, CK_1510 | CK_310), - CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310), + CLK(NULL, "armxor_ck", &armxor_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "armtim_ck", &armtim_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap_wdt", "fck", &armwdt_ck.clk, CK_16XX | CK_1510 | CK_310), CLK("omap_wdt", "ick", &armper_ck.clk, CK_16XX), @@ -97,7 +97,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "dspxor_ck", &dspxor_ck, CK_16XX | CK_1510 | CK_310), CLK(NULL, "dsptim_ck", &dsptim_ck, CK_16XX | CK_1510 | CK_310), /* CK_GEN3 clocks */ - CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_730), + CLK(NULL, "tc_ck", &tc_ck.clk, CK_16XX | CK_1510 | CK_310 | CK_7XX), CLK(NULL, "tipb_ck", &tipb_ck, CK_1510 | CK_310), CLK(NULL, "l3_ocpi_ck", &l3_ocpi_ck, CK_16XX), CLK(NULL, "tc1_ck", &tc1_ck, CK_16XX), @@ -108,7 +108,7 @@ static struct omap_clk omap_clks[] = { CLK(NULL, "lb_ck", &lb_ck.clk, CK_1510 | CK_310), CLK(NULL, "rhea1_ck", &rhea1_ck, CK_16XX), CLK(NULL, "rhea2_ck", &rhea2_ck, CK_16XX), - CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_730), + CLK(NULL, "lcd_ck", &lcd_ck_16xx, CK_16XX | CK_7XX), CLK(NULL, "lcd_ck", &lcd_ck_1510.clk, CK_1510 | CK_310), /* ULPD clocks */ CLK(NULL, "uart1_ck", &uart1_1510, CK_1510 | CK_310), @@ -398,7 +398,7 @@ static int omap1_select_table_rate(struct clk * clk, unsigned long rate) * Reprogramming the DPLL is tricky, it must be done from SRAM. * (on 730, bit 13 must always be 1) */ - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val | 0x2000); else omap_sram_reprogram_clock(ptr->dpllctl_val, ptr->ckctl_val); @@ -783,8 +783,8 @@ int __init omap1_clk_init(void) cpu_mask |= CK_16XX; if (cpu_is_omap1510()) cpu_mask |= CK_1510; - if (cpu_is_omap730()) - cpu_mask |= CK_730; + if (cpu_is_omap7xx()) + cpu_mask |= CK_7XX; if (cpu_is_omap310()) cpu_mask |= CK_310; @@ -800,7 +800,7 @@ int __init omap1_clk_init(void) crystal_type = info->system_clock_type; } -#if defined(CONFIG_ARCH_OMAP730) +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) ck_ref.rate = 13000000; #elif defined(CONFIG_ARCH_OMAP16XX) if (crystal_type == 2) @@ -847,7 +847,7 @@ int __init omap1_clk_init(void) printk(KERN_ERR "System frequencies not set. Check your config.\n"); /* Guess sane values (60MHz) */ omap_writew(0x2290, DPLL_CTL); - omap_writew(cpu_is_omap730() ? 0x3005 : 0x1005, ARM_CKCTL); + omap_writew(cpu_is_omap7xx() ? 0x3005 : 0x1005, ARM_CKCTL); ck_dpll1.rate = 60000000; } #endif @@ -862,7 +862,7 @@ int __init omap1_clk_init(void) #if defined(CONFIG_MACH_OMAP_PERSEUS2) || defined(CONFIG_MACH_OMAP_FSAMPLE) /* Select slicer output as OMAP input clock */ - omap_writew(omap_readw(OMAP730_PCC_UPLD_CTRL) & ~0x1, OMAP730_PCC_UPLD_CTRL); + omap_writew(omap_readw(OMAP7XX_PCC_UPLD_CTRL) & ~0x1, OMAP7XX_PCC_UPLD_CTRL); #endif /* Amstrad Delta wants BCLK high when inactive */ @@ -873,7 +873,7 @@ int __init omap1_clk_init(void) /* Turn off DSP and ARM_TIMXO. Make sure ARM_INTHCK is not divided */ /* (on 730, bit 13 must not be cleared) */ - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) omap_writew(omap_readw(ARM_CKCTL) & 0x2fff, ARM_CKCTL); else omap_writew(omap_readw(ARM_CKCTL) & 0x0fff, ARM_CKCTL); diff --git a/arch/arm/mach-omap1/io.c b/arch/arm/mach-omap1/io.c index 7030f9281ea..a27df2c14ac 100644 --- a/arch/arm/mach-omap1/io.c +++ b/arch/arm/mach-omap1/io.c @@ -36,33 +36,17 @@ static struct map_desc omap_io_desc[] __initdata = { } }; -#ifdef CONFIG_ARCH_OMAP730 -static struct map_desc omap730_io_desc[] __initdata = { +#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) +static struct map_desc omap7xx_io_desc[] __initdata = { { - .virtual = OMAP730_DSP_BASE, - .pfn = __phys_to_pfn(OMAP730_DSP_START), - .length = OMAP730_DSP_SIZE, + .virtual = OMAP7XX_DSP_BASE, + .pfn = __phys_to_pfn(OMAP7XX_DSP_START), + .length = OMAP7XX_DSP_SIZE, .type = MT_DEVICE }, { - .virtual = OMAP730_DSPREG_BASE, - .pfn = __phys_to_pfn(OMAP730_DSPREG_START), - .length = OMAP730_DSPREG_SIZE, - .type = MT_DEVICE - } -}; -#endif - -#ifdef CONFIG_ARCH_OMAP850 -static struct map_desc omap850_io_desc[] __initdata = { - { - .virtual = OMAP850_DSP_BASE, - .pfn = __phys_to_pfn(OMAP850_DSP_START), - .length = OMAP850_DSP_SIZE, - .type = MT_DEVICE - }, { - .virtual = OMAP850_DSPREG_BASE, - .pfn = __phys_to_pfn(OMAP850_DSPREG_START), - .length = OMAP850_DSPREG_SIZE, + .virtual = OMAP7XX_DSPREG_BASE, + .pfn = __phys_to_pfn(OMAP7XX_DSPREG_START), + .length = OMAP7XX_DSPREG_SIZE, .type = MT_DEVICE } }; @@ -120,18 +104,11 @@ void __init omap1_map_common_io(void) */ omap_check_revision(); -#ifdef CONFIG_ARCH_OMAP730 - if (cpu_is_omap730()) { - iotable_init(omap730_io_desc, ARRAY_SIZE(omap730_io_desc)); - } -#endif - -#ifdef CONFIG_ARCH_OMAP850 - if (cpu_is_omap850()) { - iotable_init(omap850_io_desc, ARRAY_SIZE(omap850_io_desc)); +#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) + if (cpu_is_omap7xx()) { + iotable_init(omap7xx_io_desc, ARRAY_SIZE(omap7xx_io_desc)); } #endif - #ifdef CONFIG_ARCH_OMAP15XX if (cpu_is_omap15xx()) { iotable_init(omap1510_io_desc, ARRAY_SIZE(omap1510_io_desc)); diff --git a/arch/arm/mach-omap1/irq.c b/arch/arm/mach-omap1/irq.c index de03c844899..8f98b58575d 100644 --- a/arch/arm/mach-omap1/irq.c +++ b/arch/arm/mach-omap1/irq.c @@ -137,16 +137,8 @@ static void omap_irq_set_cfg(int irq, int fiq, int priority, int trigger) irq_bank_writel(val, bank, offset); } -#ifdef CONFIG_ARCH_OMAP730 -static struct omap_irq_bank omap730_irq_banks[] = { - { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, - { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, - { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, -}; -#endif - -#ifdef CONFIG_ARCH_OMAP850 -static struct omap_irq_bank omap850_irq_banks[] = { +#if defined (CONFIG_ARCH_OMAP730) || defined (CONFIG_ARCH_OMAP850) +static struct omap_irq_bank omap7xx_irq_banks[] = { { .base_reg = OMAP_IH1_BASE, .trigger_map = 0xb3f8e22f }, { .base_reg = OMAP_IH2_BASE, .trigger_map = 0xfdb9c1f2 }, { .base_reg = OMAP_IH2_BASE + 0x100, .trigger_map = 0x800040f3 }, @@ -186,16 +178,10 @@ void __init omap_init_irq(void) { int i, j; -#ifdef CONFIG_ARCH_OMAP730 - if (cpu_is_omap730()) { - irq_banks = omap730_irq_banks; - irq_bank_count = ARRAY_SIZE(omap730_irq_banks); - } -#endif -#ifdef CONFIG_ARCH_OMAP850 - if (cpu_is_omap850()) { - irq_banks = omap850_irq_banks; - irq_bank_count = ARRAY_SIZE(omap850_irq_banks); +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + if (cpu_is_omap7xx()) { + irq_banks = omap7xx_irq_banks; + irq_bank_count = ARRAY_SIZE(omap7xx_irq_banks); } #endif #ifdef CONFIG_ARCH_OMAP15XX @@ -247,10 +233,8 @@ void __init omap_init_irq(void) /* Unmask level 2 handler */ - if (cpu_is_omap730()) - omap_unmask_irq(INT_730_IH2_IRQ); - else if (cpu_is_omap850()) - omap_unmask_irq(INT_850_IH2_IRQ); + if (cpu_is_omap7xx()) + omap_unmask_irq(INT_7XX_IH2_IRQ); else if (cpu_is_omap15xx()) omap_unmask_irq(INT_1510_IH2_IRQ); else if (cpu_is_omap16xx()) diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c index 505d98cfe50..3a51cb210de 100644 --- a/arch/arm/mach-omap1/mcbsp.c +++ b/arch/arm/mach-omap1/mcbsp.c @@ -79,29 +79,29 @@ static struct omap_mcbsp_ops omap1_mcbsp_ops = { .free = omap1_mcbsp_free, }; -#ifdef CONFIG_ARCH_OMAP730 -static struct omap_mcbsp_platform_data omap730_mcbsp_pdata[] = { +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +static struct omap_mcbsp_platform_data omap7xx_mcbsp_pdata[] = { { - .phys_base = OMAP730_MCBSP1_BASE, + .phys_base = OMAP7XX_MCBSP1_BASE, .dma_rx_sync = OMAP_DMA_MCBSP1_RX, .dma_tx_sync = OMAP_DMA_MCBSP1_TX, - .rx_irq = INT_730_McBSP1RX, - .tx_irq = INT_730_McBSP1TX, + .rx_irq = INT_7XX_McBSP1RX, + .tx_irq = INT_7XX_McBSP1TX, .ops = &omap1_mcbsp_ops, }, { - .phys_base = OMAP730_MCBSP2_BASE, + .phys_base = OMAP7XX_MCBSP2_BASE, .dma_rx_sync = OMAP_DMA_MCBSP3_RX, .dma_tx_sync = OMAP_DMA_MCBSP3_TX, - .rx_irq = INT_730_McBSP2RX, - .tx_irq = INT_730_McBSP2TX, + .rx_irq = INT_7XX_McBSP2RX, + .tx_irq = INT_7XX_McBSP2TX, .ops = &omap1_mcbsp_ops, }, }; -#define OMAP730_MCBSP_PDATA_SZ ARRAY_SIZE(omap730_mcbsp_pdata) +#define OMAP7XX_MCBSP_PDATA_SZ ARRAY_SIZE(omap7xx_mcbsp_pdata) #else -#define omap730_mcbsp_pdata NULL -#define OMAP730_MCBSP_PDATA_SZ 0 +#define omap7xx_mcbsp_pdata NULL +#define OMAP7XX_MCBSP_PDATA_SZ 0 #endif #ifdef CONFIG_ARCH_OMAP15XX @@ -172,8 +172,8 @@ static struct omap_mcbsp_platform_data omap16xx_mcbsp_pdata[] = { int __init omap1_mcbsp_init(void) { - if (cpu_is_omap730()) - omap_mcbsp_count = OMAP730_MCBSP_PDATA_SZ; + if (cpu_is_omap7xx()) + omap_mcbsp_count = OMAP7XX_MCBSP_PDATA_SZ; if (cpu_is_omap15xx()) omap_mcbsp_count = OMAP15XX_MCBSP_PDATA_SZ; if (cpu_is_omap16xx()) @@ -184,9 +184,9 @@ int __init omap1_mcbsp_init(void) if (!mcbsp_ptr) return -ENOMEM; - if (cpu_is_omap730()) - omap_mcbsp_register_board_cfg(omap730_mcbsp_pdata, - OMAP730_MCBSP_PDATA_SZ); + if (cpu_is_omap7xx()) + omap_mcbsp_register_board_cfg(omap7xx_mcbsp_pdata, + OMAP7XX_MCBSP_PDATA_SZ); if (cpu_is_omap15xx()) omap_mcbsp_register_board_cfg(omap15xx_mcbsp_pdata, diff --git a/arch/arm/mach-omap1/mux.c b/arch/arm/mach-omap1/mux.c index 721e0d9d8b1..d59899d6a7f 100644 --- a/arch/arm/mach-omap1/mux.c +++ b/arch/arm/mach-omap1/mux.c @@ -35,47 +35,28 @@ static struct omap_mux_cfg arch_mux_cfg; -#ifdef CONFIG_ARCH_OMAP730 -static struct pin_config __initdata_or_module omap730_pins[] = { -MUX_CFG_730("E2_730_KBR0", 12, 21, 0, 20, 1, 0) -MUX_CFG_730("J7_730_KBR1", 12, 25, 0, 24, 1, 0) -MUX_CFG_730("E1_730_KBR2", 12, 29, 0, 28, 1, 0) -MUX_CFG_730("F3_730_KBR3", 13, 1, 0, 0, 1, 0) -MUX_CFG_730("D2_730_KBR4", 13, 5, 0, 4, 1, 0) -MUX_CFG_730("C2_730_KBC0", 13, 9, 0, 8, 1, 0) -MUX_CFG_730("D3_730_KBC1", 13, 13, 0, 12, 1, 0) -MUX_CFG_730("E4_730_KBC2", 13, 17, 0, 16, 1, 0) -MUX_CFG_730("F4_730_KBC3", 13, 21, 0, 20, 1, 0) -MUX_CFG_730("E3_730_KBC4", 13, 25, 0, 24, 1, 0) - -MUX_CFG_730("AA17_730_USB_DM", 2, 21, 0, 20, 0, 0) -MUX_CFG_730("W16_730_USB_PU_EN", 2, 25, 0, 24, 0, 0) -MUX_CFG_730("W17_730_USB_VBUSI", 2, 29, 0, 28, 0, 0) +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +static struct pin_config __initdata_or_module omap7xx_pins[] = { +MUX_CFG_7XX("E2_7XX_KBR0", 12, 21, 0, 20, 1, 0) +MUX_CFG_7XX("J7_7XX_KBR1", 12, 25, 0, 24, 1, 0) +MUX_CFG_7XX("E1_7XX_KBR2", 12, 29, 0, 28, 1, 0) +MUX_CFG_7XX("F3_7XX_KBR3", 13, 1, 0, 0, 1, 0) +MUX_CFG_7XX("D2_7XX_KBR4", 13, 5, 0, 4, 1, 0) +MUX_CFG_7XX("C2_7XX_KBC0", 13, 9, 0, 8, 1, 0) +MUX_CFG_7XX("D3_7XX_KBC1", 13, 13, 0, 12, 1, 0) +MUX_CFG_7XX("E4_7XX_KBC2", 13, 17, 0, 16, 1, 0) +MUX_CFG_7XX("F4_7XX_KBC3", 13, 21, 0, 20, 1, 0) +MUX_CFG_7XX("E3_7XX_KBC4", 13, 25, 0, 24, 1, 0) + +MUX_CFG_7XX("AA17_7XX_USB_DM", 2, 21, 0, 20, 0, 0) +MUX_CFG_7XX("W16_7XX_USB_PU_EN", 2, 25, 0, 24, 0, 0) +MUX_CFG_7XX("W17_7XX_USB_VBUSI", 2, 29, 0, 28, 0, 0) }; -#define OMAP730_PINS_SZ ARRAY_SIZE(omap730_pins) +#define OMAP7XX_PINS_SZ ARRAY_SIZE(omap7xx_pins) #else -#define omap730_pins NULL -#define OMAP730_PINS_SZ 0 -#endif /* CONFIG_ARCH_OMAP730 */ - -#ifdef CONFIG_ARCH_OMAP850 -struct pin_config __initdata_or_module omap850_pins[] = { -MUX_CFG_850("E2_850_KBR0", 12, 21, 0, 20, 1, 0) -MUX_CFG_850("J7_850_KBR1", 12, 25, 0, 24, 1, 0) -MUX_CFG_850("E1_850_KBR2", 12, 29, 0, 28, 1, 0) -MUX_CFG_850("F3_850_KBR3", 13, 1, 0, 0, 1, 0) -MUX_CFG_850("D2_850_KBR4", 13, 5, 0, 4, 1, 0) -MUX_CFG_850("C2_850_KBC0", 13, 9, 0, 8, 1, 0) -MUX_CFG_850("D3_850_KBC1", 13, 13, 0, 12, 1, 0) -MUX_CFG_850("E4_850_KBC2", 13, 17, 0, 16, 1, 0) -MUX_CFG_850("F4_850_KBC3", 13, 21, 0, 20, 1, 0) -MUX_CFG_850("E3_850_KBC4", 13, 25, 0, 24, 1, 0) - -MUX_CFG_850("AA17_850_USB_DM", 2, 21, 0, 20, 0, 0) -MUX_CFG_850("W16_850_USB_PU_EN", 2, 25, 0, 24, 0, 0) -MUX_CFG_850("W17_850_USB_VBUSI", 2, 29, 0, 28, 0, 0) -}; -#endif +#define omap7xx_pins NULL +#define OMAP7XX_PINS_SZ 0 +#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */ #if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) static struct pin_config __initdata_or_module omap1xxx_pins[] = { @@ -438,11 +419,6 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) printk(" %s (0x%08x) = 0x%08x -> 0x%08x\n", cfg->pull_name, cfg->pull_reg, pull_orig, pull); } - -#ifdef CONFIG_ARCH_OMAP850 - omap_mux_register(omap850_pins, ARRAY_SIZE(omap850_pins)); -#endif - #endif #ifdef CONFIG_OMAP_MUX_ERRORS @@ -454,9 +430,9 @@ int __init_or_module omap1_cfg_reg(const struct pin_config *cfg) int __init omap1_mux_init(void) { - if (cpu_is_omap730()) { - arch_mux_cfg.pins = omap730_pins; - arch_mux_cfg.size = OMAP730_PINS_SZ; + if (cpu_is_omap7xx()) { + arch_mux_cfg.pins = omap7xx_pins; + arch_mux_cfg.size = OMAP7XX_PINS_SZ; arch_mux_cfg.cfg_reg = omap1_cfg_reg; } diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 5218943c91c..10f4e4adca1 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -62,7 +62,7 @@ static unsigned int arm_sleep_save[ARM_SLEEP_SAVE_SIZE]; static unsigned short dsp_sleep_save[DSP_SLEEP_SAVE_SIZE]; static unsigned short ulpd_sleep_save[ULPD_SLEEP_SAVE_SIZE]; -static unsigned int mpui730_sleep_save[MPUI730_SLEEP_SAVE_SIZE]; +static unsigned int mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_SIZE]; static unsigned int mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_SIZE]; static unsigned int mpui1610_sleep_save[MPUI1610_SLEEP_SAVE_SIZE]; @@ -183,9 +183,9 @@ static void omap_pm_wakeup_setup(void) * drivers must still separately call omap_set_gpio_wakeup() to * wake up to a GPIO interrupt. */ - if (cpu_is_omap730()) - level1_wake = OMAP_IRQ_BIT(INT_730_GPIO_BANK1) | - OMAP_IRQ_BIT(INT_730_IH2_IRQ); + if (cpu_is_omap7xx()) + level1_wake = OMAP_IRQ_BIT(INT_7XX_GPIO_BANK1) | + OMAP_IRQ_BIT(INT_7XX_IH2_IRQ); else if (cpu_is_omap15xx()) level1_wake = OMAP_IRQ_BIT(INT_GPIO_BANK1) | OMAP_IRQ_BIT(INT_1510_IH2_IRQ); @@ -195,10 +195,10 @@ static void omap_pm_wakeup_setup(void) omap_writel(~level1_wake, OMAP_IH1_MIR); - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { omap_writel(~level2_wake, OMAP_IH2_0_MIR); - omap_writel(~(OMAP_IRQ_BIT(INT_730_WAKE_UP_REQ) | - OMAP_IRQ_BIT(INT_730_MPUIO_KEYPAD)), + omap_writel(~(OMAP_IRQ_BIT(INT_7XX_WAKE_UP_REQ) | + OMAP_IRQ_BIT(INT_7XX_MPUIO_KEYPAD)), OMAP_IH2_1_MIR); } else if (cpu_is_omap15xx()) { level2_wake |= OMAP_IRQ_BIT(INT_KEYBOARD); @@ -253,15 +253,15 @@ void omap1_pm_suspend(void) * Save interrupt, MPUI, ARM and UPLD control registers. */ - if (cpu_is_omap730()) { - MPUI730_SAVE(OMAP_IH1_MIR); - MPUI730_SAVE(OMAP_IH2_0_MIR); - MPUI730_SAVE(OMAP_IH2_1_MIR); - MPUI730_SAVE(MPUI_CTRL); - MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI730_SAVE(MPUI_DSP_API_CONFIG); - MPUI730_SAVE(EMIFS_CONFIG); - MPUI730_SAVE(EMIFF_SDRAM_CONFIG); + if (cpu_is_omap7xx()) { + MPUI7XX_SAVE(OMAP_IH1_MIR); + MPUI7XX_SAVE(OMAP_IH2_0_MIR); + MPUI7XX_SAVE(OMAP_IH2_1_MIR); + MPUI7XX_SAVE(MPUI_CTRL); + MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI7XX_SAVE(MPUI_DSP_API_CONFIG); + MPUI7XX_SAVE(EMIFS_CONFIG); + MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG); } else if (cpu_is_omap15xx()) { MPUI1510_SAVE(OMAP_IH1_MIR); @@ -306,7 +306,7 @@ void omap1_pm_suspend(void) omap_writew(omap_readw(ARM_RSTCT1) & ~(1 << DSP_EN), ARM_RSTCT1); /* shut down dsp_ck */ - if (!cpu_is_omap730()) + if (!cpu_is_omap7xx()) omap_writew(omap_readw(ARM_CKCTL) & ~(1 << EN_DSPCK), ARM_CKCTL); /* temporarily enabling api_ck to access DSP registers */ @@ -383,12 +383,12 @@ void omap1_pm_suspend(void) ULPD_RESTORE(ULPD_CLOCK_CTRL); ULPD_RESTORE(ULPD_STATUS_REQ); - if (cpu_is_omap730()) { - MPUI730_RESTORE(EMIFS_CONFIG); - MPUI730_RESTORE(EMIFF_SDRAM_CONFIG); - MPUI730_RESTORE(OMAP_IH1_MIR); - MPUI730_RESTORE(OMAP_IH2_0_MIR); - MPUI730_RESTORE(OMAP_IH2_1_MIR); + if (cpu_is_omap7xx()) { + MPUI7XX_RESTORE(EMIFS_CONFIG); + MPUI7XX_RESTORE(EMIFF_SDRAM_CONFIG); + MPUI7XX_RESTORE(OMAP_IH1_MIR); + MPUI7XX_RESTORE(OMAP_IH2_0_MIR); + MPUI7XX_RESTORE(OMAP_IH2_1_MIR); } else if (cpu_is_omap15xx()) { MPUI1510_RESTORE(MPUI_CTRL); MPUI1510_RESTORE(MPUI_DSP_BOOT_CONFIG); @@ -461,13 +461,13 @@ static int omap_pm_read_proc( ULPD_SAVE(ULPD_DPLL_CTRL); ULPD_SAVE(ULPD_POWER_CTRL); - if (cpu_is_omap730()) { - MPUI730_SAVE(MPUI_CTRL); - MPUI730_SAVE(MPUI_DSP_STATUS); - MPUI730_SAVE(MPUI_DSP_BOOT_CONFIG); - MPUI730_SAVE(MPUI_DSP_API_CONFIG); - MPUI730_SAVE(EMIFF_SDRAM_CONFIG); - MPUI730_SAVE(EMIFS_CONFIG); + if (cpu_is_omap7xx()) { + MPUI7XX_SAVE(MPUI_CTRL); + MPUI7XX_SAVE(MPUI_DSP_STATUS); + MPUI7XX_SAVE(MPUI_DSP_BOOT_CONFIG); + MPUI7XX_SAVE(MPUI_DSP_API_CONFIG); + MPUI7XX_SAVE(EMIFF_SDRAM_CONFIG); + MPUI7XX_SAVE(EMIFS_CONFIG); } else if (cpu_is_omap15xx()) { MPUI1510_SAVE(MPUI_CTRL); MPUI1510_SAVE(MPUI_DSP_STATUS); @@ -517,20 +517,20 @@ static int omap_pm_read_proc( ULPD_SHOW(ULPD_STATUS_REQ), ULPD_SHOW(ULPD_POWER_CTRL)); - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { my_buffer_offset += sprintf(my_base + my_buffer_offset, - "MPUI730_CTRL_REG 0x%-8x \n" - "MPUI730_DSP_STATUS_REG: 0x%-8x \n" - "MPUI730_DSP_BOOT_CONFIG_REG: 0x%-8x \n" - "MPUI730_DSP_API_CONFIG_REG: 0x%-8x \n" - "MPUI730_SDRAM_CONFIG_REG: 0x%-8x \n" - "MPUI730_EMIFS_CONFIG_REG: 0x%-8x \n", - MPUI730_SHOW(MPUI_CTRL), - MPUI730_SHOW(MPUI_DSP_STATUS), - MPUI730_SHOW(MPUI_DSP_BOOT_CONFIG), - MPUI730_SHOW(MPUI_DSP_API_CONFIG), - MPUI730_SHOW(EMIFF_SDRAM_CONFIG), - MPUI730_SHOW(EMIFS_CONFIG)); + "MPUI7XX_CTRL_REG 0x%-8x \n" + "MPUI7XX_DSP_STATUS_REG: 0x%-8x \n" + "MPUI7XX_DSP_BOOT_CONFIG_REG: 0x%-8x \n" + "MPUI7XX_DSP_API_CONFIG_REG: 0x%-8x \n" + "MPUI7XX_SDRAM_CONFIG_REG: 0x%-8x \n" + "MPUI7XX_EMIFS_CONFIG_REG: 0x%-8x \n", + MPUI7XX_SHOW(MPUI_CTRL), + MPUI7XX_SHOW(MPUI_DSP_STATUS), + MPUI7XX_SHOW(MPUI_DSP_BOOT_CONFIG), + MPUI7XX_SHOW(MPUI_DSP_API_CONFIG), + MPUI7XX_SHOW(EMIFF_SDRAM_CONFIG), + MPUI7XX_SHOW(EMIFS_CONFIG)); } else if (cpu_is_omap15xx()) { my_buffer_offset += sprintf(my_base + my_buffer_offset, "MPUI1510_CTRL_REG 0x%-8x \n" @@ -668,9 +668,9 @@ static int __init omap_pm_init(void) * These routines need to be in SRAM as that's the only * memory the MPU can see when it wakes up. */ - if (cpu_is_omap730()) { - omap_sram_suspend = omap_sram_push(omap730_cpu_suspend, - omap730_cpu_suspend_sz); + if (cpu_is_omap7xx()) { + omap_sram_suspend = omap_sram_push(omap7xx_cpu_suspend, + omap7xx_cpu_suspend_sz); } else if (cpu_is_omap15xx()) { omap_sram_suspend = omap_sram_push(omap1510_cpu_suspend, omap1510_cpu_suspend_sz); @@ -686,8 +686,8 @@ static int __init omap_pm_init(void) pm_idle = omap1_pm_idle; - if (cpu_is_omap730()) - setup_irq(INT_730_WAKE_UP_REQ, &omap_wakeup_irq); + if (cpu_is_omap7xx()) + setup_irq(INT_7XX_WAKE_UP_REQ, &omap_wakeup_irq); else if (cpu_is_omap16xx()) setup_irq(INT_1610_WAKE_UP_REQ, &omap_wakeup_irq); @@ -700,8 +700,8 @@ static int __init omap_pm_init(void) omap_writew(ULPD_POWER_CTRL_REG_VAL, ULPD_POWER_CTRL); /* Configure IDLECT3 */ - if (cpu_is_omap730()) - omap_writel(OMAP730_IDLECT3_VAL, OMAP730_IDLECT3); + if (cpu_is_omap7xx()) + omap_writel(OMAP7XX_IDLECT3_VAL, OMAP7XX_IDLECT3); else if (cpu_is_omap16xx()) omap_writel(OMAP1610_IDLECT3_VAL, OMAP1610_IDLECT3); diff --git a/arch/arm/mach-omap1/pm.h b/arch/arm/mach-omap1/pm.h index c4f05bdcf8a..56a647986ae 100644 --- a/arch/arm/mach-omap1/pm.h +++ b/arch/arm/mach-omap1/pm.h @@ -98,13 +98,14 @@ #define OMAP1610_IDLECT3 0xfffece24 #define OMAP1610_IDLE_LOOP_REQUEST 0x0400 -#define OMAP730_IDLECT1_SLEEP_VAL 0x16c7 -#define OMAP730_IDLECT2_SLEEP_VAL 0x09c7 -#define OMAP730_IDLECT3_VAL 0x3f -#define OMAP730_IDLECT3 0xfffece24 -#define OMAP730_IDLE_LOOP_REQUEST 0x0C00 +#define OMAP7XX_IDLECT1_SLEEP_VAL 0x16c7 +#define OMAP7XX_IDLECT2_SLEEP_VAL 0x09c7 +#define OMAP7XX_IDLECT3_VAL 0x3f +#define OMAP7XX_IDLECT3 0xfffece24 +#define OMAP7XX_IDLE_LOOP_REQUEST 0x0C00 #if !defined(CONFIG_ARCH_OMAP730) && \ + !defined(CONFIG_ARCH_OMAP850) && \ !defined(CONFIG_ARCH_OMAP15XX) && \ !defined(CONFIG_ARCH_OMAP16XX) #warning "Power management for this processor not implemented yet" @@ -122,17 +123,17 @@ extern void allow_idle_sleep(void); extern void omap1_pm_idle(void); extern void omap1_pm_suspend(void); -extern void omap730_cpu_suspend(unsigned short, unsigned short); +extern void omap7xx_cpu_suspend(unsigned short, unsigned short); extern void omap1510_cpu_suspend(unsigned short, unsigned short); extern void omap1610_cpu_suspend(unsigned short, unsigned short); -extern void omap730_idle_loop_suspend(void); +extern void omap7xx_idle_loop_suspend(void); extern void omap1510_idle_loop_suspend(void); extern void omap1610_idle_loop_suspend(void); -extern unsigned int omap730_cpu_suspend_sz; +extern unsigned int omap7xx_cpu_suspend_sz; extern unsigned int omap1510_cpu_suspend_sz; extern unsigned int omap1610_cpu_suspend_sz; -extern unsigned int omap730_idle_loop_suspend_sz; +extern unsigned int omap7xx_idle_loop_suspend_sz; extern unsigned int omap1510_idle_loop_suspend_sz; extern unsigned int omap1610_idle_loop_suspend_sz; @@ -155,9 +156,9 @@ extern void omap_serial_wake_trigger(int enable); #define ULPD_RESTORE(x) omap_writew((ulpd_sleep_save[ULPD_SLEEP_SAVE_##x]), (x)) #define ULPD_SHOW(x) ulpd_sleep_save[ULPD_SLEEP_SAVE_##x] -#define MPUI730_SAVE(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] = omap_readl(x) -#define MPUI730_RESTORE(x) omap_writel((mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x]), (x)) -#define MPUI730_SHOW(x) mpui730_sleep_save[MPUI730_SLEEP_SAVE_##x] +#define MPUI7XX_SAVE(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] = omap_readl(x) +#define MPUI7XX_RESTORE(x) omap_writel((mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x]), (x)) +#define MPUI7XX_SHOW(x) mpui7xx_sleep_save[MPUI7XX_SLEEP_SAVE_##x] #define MPUI1510_SAVE(x) mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x] = omap_readl(x) #define MPUI1510_RESTORE(x) omap_writel((mpui1510_sleep_save[MPUI1510_SLEEP_SAVE_##x]), (x)) @@ -232,24 +233,24 @@ enum mpui1510_save_state { #endif }; -enum mpui730_save_state { - MPUI730_SLEEP_SAVE_START = 0, +enum mpui7xx_save_state { + MPUI7XX_SLEEP_SAVE_START = 0, /* * MPUI registers 32 bits */ - MPUI730_SLEEP_SAVE_MPUI_CTRL, - MPUI730_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, - MPUI730_SLEEP_SAVE_MPUI_DSP_API_CONFIG, - MPUI730_SLEEP_SAVE_MPUI_DSP_STATUS, - MPUI730_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, - MPUI730_SLEEP_SAVE_EMIFS_CONFIG, - MPUI730_SLEEP_SAVE_OMAP_IH1_MIR, - MPUI730_SLEEP_SAVE_OMAP_IH2_0_MIR, - MPUI730_SLEEP_SAVE_OMAP_IH2_1_MIR, -#if defined(CONFIG_ARCH_OMAP730) - MPUI730_SLEEP_SAVE_SIZE + MPUI7XX_SLEEP_SAVE_MPUI_CTRL, + MPUI7XX_SLEEP_SAVE_MPUI_DSP_BOOT_CONFIG, + MPUI7XX_SLEEP_SAVE_MPUI_DSP_API_CONFIG, + MPUI7XX_SLEEP_SAVE_MPUI_DSP_STATUS, + MPUI7XX_SLEEP_SAVE_EMIFF_SDRAM_CONFIG, + MPUI7XX_SLEEP_SAVE_EMIFS_CONFIG, + MPUI7XX_SLEEP_SAVE_OMAP_IH1_MIR, + MPUI7XX_SLEEP_SAVE_OMAP_IH2_0_MIR, + MPUI7XX_SLEEP_SAVE_OMAP_IH2_1_MIR, +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + MPUI7XX_SLEEP_SAVE_SIZE #else - MPUI730_SLEEP_SAVE_SIZE = 0 + MPUI7XX_SLEEP_SAVE_SIZE = 0 #endif }; diff --git a/arch/arm/mach-omap1/serial.c b/arch/arm/mach-omap1/serial.c index d496e50fec4..ed07af109f0 100644 --- a/arch/arm/mach-omap1/serial.c +++ b/arch/arm/mach-omap1/serial.c @@ -110,18 +110,11 @@ void __init omap_serial_init(void) { int i; - if (cpu_is_omap730()) { + if (cpu_is_omap7xx()) { serial_platform_data[0].regshift = 0; serial_platform_data[1].regshift = 0; - serial_platform_data[0].irq = INT_730_UART_MODEM_1; - serial_platform_data[1].irq = INT_730_UART_MODEM_IRDA_2; - } - - if (cpu_is_omap850()) { - serial_platform_data[0].regshift = 0; - serial_platform_data[1].regshift = 0; - serial_platform_data[0].irq = INT_850_UART_MODEM_1; - serial_platform_data[1].irq = INT_850_UART_MODEM_IRDA_2; + serial_platform_data[0].irq = INT_7XX_UART_MODEM_1; + serial_platform_data[1].irq = INT_7XX_UART_MODEM_IRDA_2; } if (cpu_is_omap15xx()) { diff --git a/arch/arm/mach-omap1/sleep.S b/arch/arm/mach-omap1/sleep.S index 22e8568339b..ef771ce8b03 100644 --- a/arch/arm/mach-omap1/sleep.S +++ b/arch/arm/mach-omap1/sleep.S @@ -1,7 +1,7 @@ /* * linux/arch/arm/mach-omap1/sleep.S * - * Low-level OMAP730/1510/1610 sleep/wakeUp support + * Low-level OMAP7XX/1510/1610 sleep/wakeUp support * * Initial SA1110 code: * Copyright (c) 2001 Cliff Brake <cbrake@accelent.com> @@ -57,8 +57,8 @@ * */ -#if defined(CONFIG_ARCH_OMAP730) -ENTRY(omap730_cpu_suspend) +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +ENTRY(omap7xx_cpu_suspend) @ save registers on stack stmfd sp!, {r0 - r12, lr} @@ -91,13 +91,13 @@ ENTRY(omap730_cpu_suspend) @ turn off clock domains @ do not disable PERCK (0x04) - mov r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff - orr r5, r5, #OMAP730_IDLECT2_SLEEP_VAL & 0xff00 + mov r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff + orr r5, r5, #OMAP7XX_IDLECT2_SLEEP_VAL & 0xff00 strh r5, [r4, #ARM_IDLECT2_ASM_OFFSET & 0xff] @ request ARM idle - mov r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff - orr r3, r3, #OMAP730_IDLECT1_SLEEP_VAL & 0xff00 + mov r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff + orr r3, r3, #OMAP7XX_IDLECT1_SLEEP_VAL & 0xff00 strh r3, [r4, #ARM_IDLECT1_ASM_OFFSET & 0xff] @ disable instruction cache @@ -113,7 +113,7 @@ ENTRY(omap730_cpu_suspend) mov r2, #0 mcr p15, 0, r2, c7, c0, 4 @ wait for interrupt /* - * omap730_cpu_suspend()'s resume point. + * omap7xx_cpu_suspend()'s resume point. * * It will just start executing here, so we'll restore stuff from the * stack. @@ -132,9 +132,9 @@ ENTRY(omap730_cpu_suspend) @ restore regs and return ldmfd sp!, {r0 - r12, pc} -ENTRY(omap730_cpu_suspend_sz) - .word . - omap730_cpu_suspend -#endif /* CONFIG_ARCH_OMAP730 */ +ENTRY(omap7xx_cpu_suspend_sz) + .word . - omap7xx_cpu_suspend +#endif /* CONFIG_ARCH_OMAP730 || CONFIG_ARCH_OMAP850 */ #ifdef CONFIG_ARCH_OMAP15XX ENTRY(omap1510_cpu_suspend) diff --git a/arch/arm/plat-omap/devices.c b/arch/arm/plat-omap/devices.c index a64b692a1bf..d2f54753b01 100644 --- a/arch/arm/plat-omap/devices.c +++ b/arch/arm/plat-omap/devices.c @@ -113,17 +113,17 @@ static void omap_init_kp(void) omap_cfg_reg(E19_1610_KBR4); omap_cfg_reg(N19_1610_KBR5); } else if (machine_is_omap_perseus2() || machine_is_omap_fsample()) { - omap_cfg_reg(E2_730_KBR0); - omap_cfg_reg(J7_730_KBR1); - omap_cfg_reg(E1_730_KBR2); - omap_cfg_reg(F3_730_KBR3); - omap_cfg_reg(D2_730_KBR4); - - omap_cfg_reg(C2_730_KBC0); - omap_cfg_reg(D3_730_KBC1); - omap_cfg_reg(E4_730_KBC2); - omap_cfg_reg(F4_730_KBC3); - omap_cfg_reg(E3_730_KBC4); + omap_cfg_reg(E2_7XX_KBR0); + omap_cfg_reg(J7_7XX_KBR1); + omap_cfg_reg(E1_7XX_KBR2); + omap_cfg_reg(F3_7XX_KBR3); + omap_cfg_reg(D2_7XX_KBR4); + + omap_cfg_reg(C2_7XX_KBC0); + omap_cfg_reg(D3_7XX_KBC1); + omap_cfg_reg(E4_7XX_KBC2); + omap_cfg_reg(F4_7XX_KBC3); + omap_cfg_reg(E3_7XX_KBC4); } else if (machine_is_omap_h4()) { omap_cfg_reg(T19_24XX_KBR0); omap_cfg_reg(R19_24XX_KBR1); diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c index 71ebd7fcfea..b0c73613a4e 100644 --- a/arch/arm/plat-omap/gpio.c +++ b/arch/arm/plat-omap/gpio.c @@ -68,36 +68,20 @@ #define OMAP1610_GPIO_SET_DATAOUT 0x00f0 /* - * OMAP730 specific GPIO registers + * OMAP7XX specific GPIO registers */ -#define OMAP730_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) -#define OMAP730_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) -#define OMAP730_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) -#define OMAP730_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) -#define OMAP730_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) -#define OMAP730_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) -#define OMAP730_GPIO_DATA_INPUT 0x00 -#define OMAP730_GPIO_DATA_OUTPUT 0x04 -#define OMAP730_GPIO_DIR_CONTROL 0x08 -#define OMAP730_GPIO_INT_CONTROL 0x0c -#define OMAP730_GPIO_INT_MASK 0x10 -#define OMAP730_GPIO_INT_STATUS 0x14 - -/* - * OMAP850 specific GPIO registers - */ -#define OMAP850_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) -#define OMAP850_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) -#define OMAP850_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) -#define OMAP850_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) -#define OMAP850_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) -#define OMAP850_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) -#define OMAP850_GPIO_DATA_INPUT 0x00 -#define OMAP850_GPIO_DATA_OUTPUT 0x04 -#define OMAP850_GPIO_DIR_CONTROL 0x08 -#define OMAP850_GPIO_INT_CONTROL 0x0c -#define OMAP850_GPIO_INT_MASK 0x10 -#define OMAP850_GPIO_INT_STATUS 0x14 +#define OMAP7XX_GPIO1_BASE OMAP1_IO_ADDRESS(0xfffbc000) +#define OMAP7XX_GPIO2_BASE OMAP1_IO_ADDRESS(0xfffbc800) +#define OMAP7XX_GPIO3_BASE OMAP1_IO_ADDRESS(0xfffbd000) +#define OMAP7XX_GPIO4_BASE OMAP1_IO_ADDRESS(0xfffbd800) +#define OMAP7XX_GPIO5_BASE OMAP1_IO_ADDRESS(0xfffbe000) +#define OMAP7XX_GPIO6_BASE OMAP1_IO_ADDRESS(0xfffbe800) +#define OMAP7XX_GPIO_DATA_INPUT 0x00 +#define OMAP7XX_GPIO_DATA_OUTPUT 0x04 +#define OMAP7XX_GPIO_DIR_CONTROL 0x08 +#define OMAP7XX_GPIO_INT_CONTROL 0x0c +#define OMAP7XX_GPIO_INT_MASK 0x10 +#define OMAP7XX_GPIO_INT_STATUS 0x14 #define OMAP1_MPUIO_VBASE OMAP1_IO_ADDRESS(OMAP1_MPUIO_BASE) @@ -215,8 +199,7 @@ struct gpio_bank { #define METHOD_MPUIO 0 #define METHOD_GPIO_1510 1 #define METHOD_GPIO_1610 2 -#define METHOD_GPIO_730 3 -#define METHOD_GPIO_850 4 +#define METHOD_GPIO_7XX 3 #define METHOD_GPIO_24XX 5 #ifdef CONFIG_ARCH_OMAP16XX @@ -236,31 +219,18 @@ static struct gpio_bank gpio_bank_1510[2] = { }; #endif -#ifdef CONFIG_ARCH_OMAP730 -static struct gpio_bank gpio_bank_730[7] = { - { OMAP1_MPUIO_VBASE, INT_730_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP730_GPIO1_BASE, INT_730_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_730 }, - { OMAP730_GPIO2_BASE, INT_730_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_730 }, - { OMAP730_GPIO3_BASE, INT_730_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_730 }, - { OMAP730_GPIO4_BASE, INT_730_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_730 }, - { OMAP730_GPIO5_BASE, INT_730_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_730 }, - { OMAP730_GPIO6_BASE, INT_730_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_730 }, +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +static struct gpio_bank gpio_bank_7xx[7] = { + { OMAP1_MPUIO_VBASE, INT_7XX_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, + { OMAP7XX_GPIO1_BASE, INT_7XX_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_7XX }, + { OMAP7XX_GPIO2_BASE, INT_7XX_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_7XX }, + { OMAP7XX_GPIO3_BASE, INT_7XX_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_7XX }, + { OMAP7XX_GPIO4_BASE, INT_7XX_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_7XX }, + { OMAP7XX_GPIO5_BASE, INT_7XX_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_7XX }, + { OMAP7XX_GPIO6_BASE, INT_7XX_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_7XX }, }; #endif -#ifdef CONFIG_ARCH_OMAP850 -static struct gpio_bank gpio_bank_850[7] = { - { OMAP1_MPUIO_VBASE, INT_850_MPUIO, IH_MPUIO_BASE, METHOD_MPUIO }, - { OMAP850_GPIO1_BASE, INT_850_GPIO_BANK1, IH_GPIO_BASE, METHOD_GPIO_850 }, - { OMAP850_GPIO2_BASE, INT_850_GPIO_BANK2, IH_GPIO_BASE + 32, METHOD_GPIO_850 }, - { OMAP850_GPIO3_BASE, INT_850_GPIO_BANK3, IH_GPIO_BASE + 64, METHOD_GPIO_850 }, - { OMAP850_GPIO4_BASE, INT_850_GPIO_BANK4, IH_GPIO_BASE + 96, METHOD_GPIO_850 }, - { OMAP850_GPIO5_BASE, INT_850_GPIO_BANK5, IH_GPIO_BASE + 128, METHOD_GPIO_850 }, - { OMAP850_GPIO6_BASE, INT_850_GPIO_BANK6, IH_GPIO_BASE + 160, METHOD_GPIO_850 }, -}; -#endif - - #ifdef CONFIG_ARCH_OMAP24XX static struct gpio_bank gpio_bank_242x[4] = { @@ -402,14 +372,9 @@ static void _set_gpio_direction(struct gpio_bank *bank, int gpio, int is_input) reg += OMAP1610_GPIO_DIRECTION; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DIR_CONTROL; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DIR_CONTROL; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DIR_CONTROL; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -469,19 +434,9 @@ static void _set_gpio_dataout(struct gpio_bank *bank, int gpio, int enable) l = 1 << gpio; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DATA_OUTPUT; - l = __raw_readl(reg); - if (enable) - l |= 1 << gpio; - else - l &= ~(1 << gpio); - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_OUTPUT; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_OUTPUT; l = __raw_readl(reg); if (enable) l |= 1 << gpio; @@ -537,14 +492,9 @@ static int _get_gpio_datain(struct gpio_bank *bank, int gpio) reg += OMAP1610_GPIO_DATAIN; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DATA_INPUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_INPUT; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_INPUT; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -588,14 +538,9 @@ static int _get_gpio_dataout(struct gpio_bank *bank, int gpio) reg += OMAP1610_GPIO_DATAOUT; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DATA_OUTPUT; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DATA_OUTPUT; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DATA_OUTPUT; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ @@ -797,21 +742,9 @@ static int _set_gpio_triggering(struct gpio_bank *bank, int gpio, int trigger) __raw_writel(1 << gpio, bank->base + OMAP1610_GPIO_CLEAR_WAKEUPENA); break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_CONTROL; - l = __raw_readl(reg); - if (trigger & IRQ_TYPE_EDGE_RISING) - l |= 1 << gpio; - else if (trigger & IRQ_TYPE_EDGE_FALLING) - l &= ~(1 << gpio); - else - goto bad; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_CONTROL; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_CONTROL; l = __raw_readl(reg); if (trigger & IRQ_TYPE_EDGE_RISING) l |= 1 << gpio; @@ -897,14 +830,9 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask) reg += OMAP1610_GPIO_IRQSTATUS1; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_STATUS; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_STATUS; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_STATUS; break; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) @@ -971,16 +899,9 @@ static u32 _get_gpio_irqbank_mask(struct gpio_bank *bank) mask = 0xffff; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_MASK; - mask = 0xffffffff; - inv = 1; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_MASK; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_MASK; mask = 0xffffffff; inv = 1; break; @@ -1044,19 +965,9 @@ static void _enable_gpio_irqbank(struct gpio_bank *bank, int gpio_mask, int enab l = gpio_mask; break; #endif -#ifdef CONFIG_ARCH_OMAP730 - case METHOD_GPIO_730: - reg += OMAP730_GPIO_INT_MASK; - l = __raw_readl(reg); - if (enable) - l &= ~(gpio_mask); - else - l |= gpio_mask; - break; -#endif -#ifdef CONFIG_ARCH_OMAP850 - case METHOD_GPIO_850: - reg += OMAP850_GPIO_INT_MASK; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_INT_MASK; l = __raw_readl(reg); if (enable) l &= ~(gpio_mask); @@ -1249,13 +1160,9 @@ static void gpio_irq_handler(unsigned int irq, struct irq_desc *desc) if (bank->method == METHOD_GPIO_1610) isr_reg = bank->base + OMAP1610_GPIO_IRQSTATUS1; #endif -#ifdef CONFIG_ARCH_OMAP730 - if (bank->method == METHOD_GPIO_730) - isr_reg = bank->base + OMAP730_GPIO_INT_STATUS; -#endif -#ifdef CONFIG_ARCH_OMAP850 - if (bank->method == METHOD_GPIO_850) - isr_reg = bank->base + OMAP850_GPIO_INT_STATUS; +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + if (bank->method == METHOD_GPIO_7XX) + isr_reg = bank->base + OMAP7XX_GPIO_INT_STATUS; #endif #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) if (bank->method == METHOD_GPIO_24XX) @@ -1524,11 +1431,8 @@ static int gpio_is_input(struct gpio_bank *bank, int mask) case METHOD_GPIO_1610: reg += OMAP1610_GPIO_DIRECTION; break; - case METHOD_GPIO_730: - reg += OMAP730_GPIO_DIR_CONTROL; - break; - case METHOD_GPIO_850: - reg += OMAP850_GPIO_DIR_CONTROL; + case METHOD_GPIO_7XX: + reg += OMAP7XX_GPIO_DIR_CONTROL; break; case METHOD_GPIO_24XX: reg += OMAP24XX_GPIO_OE; @@ -1695,21 +1599,13 @@ static int __init _omap_gpio_init(void) (rev >> 4) & 0x0f, rev & 0x0f); } #endif -#ifdef CONFIG_ARCH_OMAP730 - if (cpu_is_omap730()) { - printk(KERN_INFO "OMAP730 GPIO hardware\n"); - gpio_bank_count = 7; - gpio_bank = gpio_bank_730; - } -#endif -#ifdef CONFIG_ARCH_OMAP850 - if (cpu_is_omap850()) { - printk(KERN_INFO "OMAP850 GPIO hardware\n"); +#if defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) + if (cpu_is_omap7xx()) { + printk(KERN_INFO "OMAP7XX GPIO hardware\n"); gpio_bank_count = 7; - gpio_bank = gpio_bank_850; + gpio_bank = gpio_bank_7xx; } #endif - #ifdef CONFIG_ARCH_OMAP24XX if (cpu_is_omap242x()) { int rev; @@ -1768,11 +1664,11 @@ static int __init _omap_gpio_init(void) __raw_writew(0xffff, bank->base + OMAP1610_GPIO_IRQSTATUS1); __raw_writew(0x0014, bank->base + OMAP1610_GPIO_SYSCONFIG); } - if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_730) { - __raw_writel(0xffffffff, bank->base + OMAP730_GPIO_INT_MASK); - __raw_writel(0x00000000, bank->base + OMAP730_GPIO_INT_STATUS); + if (cpu_is_omap7xx() && bank->method == METHOD_GPIO_7XX) { + __raw_writel(0xffffffff, bank->base + OMAP7XX_GPIO_INT_MASK); + __raw_writel(0x00000000, bank->base + OMAP7XX_GPIO_INT_STATUS); - gpio_count = 32; /* 730 has 32-bit GPIOs */ + gpio_count = 32; /* 7xx has 32-bit GPIOs */ } #if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX) || \ @@ -2160,8 +2056,7 @@ static int dbg_gpio_show(struct seq_file *s, void *unused) if (bank_is_mpuio(bank)) gpio = OMAP_MPUIO(0); - else if (cpu_class_is_omap2() || cpu_is_omap730() || - cpu_is_omap850()) + else if (cpu_class_is_omap2() || cpu_is_omap7xx()) bankwidth = 32; for (j = 0; j < bankwidth; j++, gpio++, mask <<= 1) { diff --git a/arch/arm/plat-omap/include/mach/entry-macro.S b/arch/arm/plat-omap/include/mach/entry-macro.S index a5592991634..abe086416e1 100644 --- a/arch/arm/plat-omap/include/mach/entry-macro.S +++ b/arch/arm/plat-omap/include/mach/entry-macro.S @@ -17,11 +17,11 @@ #if defined(CONFIG_ARCH_OMAP1) -#if defined(CONFIG_ARCH_OMAP730) && \ +#if (defined(CONFIG_ARCH_OMAP730)||defined(CONFIG_ARCH_OMAP850)) && \ (defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX)) -#error "FIXME: OMAP730 doesn't support multiple-OMAP" -#elif defined(CONFIG_ARCH_OMAP730) -#define INT_IH2_IRQ INT_730_IH2_IRQ +#error "FIXME: OMAP7XX doesn't support multiple-OMAP" +#elif defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) +#define INT_IH2_IRQ INT_7XX_IH2_IRQ #elif defined(CONFIG_ARCH_OMAP15XX) #define INT_IH2_IRQ INT_1510_IH2_IRQ #elif defined(CONFIG_ARCH_OMAP16XX) diff --git a/arch/arm/plat-omap/include/mach/hardware.h b/arch/arm/plat-omap/include/mach/hardware.h index 26c1fbff08a..99c42412c0a 100644 --- a/arch/arm/plat-omap/include/mach/hardware.h +++ b/arch/arm/plat-omap/include/mach/hardware.h @@ -280,7 +280,7 @@ * --------------------------------------------------------------------------- */ -#include "omap730.h" +#include "omap7xx.h" #include "omap1510.h" #include "omap16xx.h" #include "omap24xx.h" diff --git a/arch/arm/plat-omap/include/mach/irqs.h b/arch/arm/plat-omap/include/mach/irqs.h index 28a165058b6..6a6d0281e1d 100644 --- a/arch/arm/plat-omap/include/mach/irqs.h +++ b/arch/arm/plat-omap/include/mach/irqs.h @@ -86,49 +86,26 @@ #define INT_1610_SSR_FIFO_0 29 /* - * OMAP-730 specific IRQ numbers for interrupt handler 1 + * OMAP-7xx specific IRQ numbers for interrupt handler 1 */ -#define INT_730_IH2_FIQ 0 -#define INT_730_IH2_IRQ 1 -#define INT_730_USB_NON_ISO 2 -#define INT_730_USB_ISO 3 -#define INT_730_ICR 4 -#define INT_730_EAC 5 -#define INT_730_GPIO_BANK1 6 -#define INT_730_GPIO_BANK2 7 -#define INT_730_GPIO_BANK3 8 -#define INT_730_McBSP2TX 10 -#define INT_730_McBSP2RX 11 -#define INT_730_McBSP2RX_OVF 12 -#define INT_730_LCD_LINE 14 -#define INT_730_GSM_PROTECT 15 -#define INT_730_TIMER3 16 -#define INT_730_GPIO_BANK5 17 -#define INT_730_GPIO_BANK6 18 -#define INT_730_SPGIO_WR 29 - -/* - * OMAP-850 specific IRQ numbers for interrupt handler 1 - */ -#define INT_850_IH2_FIQ 0 -#define INT_850_IH2_IRQ 1 -#define INT_850_USB_NON_ISO 2 -#define INT_850_USB_ISO 3 -#define INT_850_ICR 4 -#define INT_850_EAC 5 -#define INT_850_GPIO_BANK1 6 -#define INT_850_GPIO_BANK2 7 -#define INT_850_GPIO_BANK3 8 -#define INT_850_McBSP2TX 10 -#define INT_850_McBSP2RX 11 -#define INT_850_McBSP2RX_OVF 12 -#define INT_850_LCD_LINE 14 -#define INT_850_GSM_PROTECT 15 -#define INT_850_TIMER3 16 -#define INT_850_GPIO_BANK5 17 -#define INT_850_GPIO_BANK6 18 -#define INT_850_SPGIO_WR 29 - +#define INT_7XX_IH2_FIQ 0 +#define INT_7XX_IH2_IRQ 1 +#define INT_7XX_USB_NON_ISO 2 +#define INT_7XX_USB_ISO 3 +#define INT_7XX_ICR 4 +#define INT_7XX_EAC 5 +#define INT_7XX_GPIO_BANK1 6 +#define INT_7XX_GPIO_BANK2 7 +#define INT_7XX_GPIO_BANK3 8 +#define INT_7XX_McBSP2TX 10 +#define INT_7XX_McBSP2RX 11 +#define INT_7XX_McBSP2RX_OVF 12 +#define INT_7XX_LCD_LINE 14 +#define INT_7XX_GSM_PROTECT 15 +#define INT_7XX_TIMER3 16 +#define INT_7XX_GPIO_BANK5 17 +#define INT_7XX_GPIO_BANK6 18 +#define INT_7XX_SPGIO_WR 29 /* * IRQ numbers for interrupt handler 2 @@ -206,120 +183,62 @@ #define INT_1610_SHA1MD5 (91 + IH2_BASE) /* - * OMAP-730 specific IRQ numbers for interrupt handler 2 - */ -#define INT_730_HW_ERRORS (0 + IH2_BASE) -#define INT_730_NFIQ_PWR_FAIL (1 + IH2_BASE) -#define INT_730_CFCD (2 + IH2_BASE) -#define INT_730_CFIREQ (3 + IH2_BASE) -#define INT_730_I2C (4 + IH2_BASE) -#define INT_730_PCC (5 + IH2_BASE) -#define INT_730_MPU_EXT_NIRQ (6 + IH2_BASE) -#define INT_730_SPI_100K_1 (7 + IH2_BASE) -#define INT_730_SYREN_SPI (8 + IH2_BASE) -#define INT_730_VLYNQ (9 + IH2_BASE) -#define INT_730_GPIO_BANK4 (10 + IH2_BASE) -#define INT_730_McBSP1TX (11 + IH2_BASE) -#define INT_730_McBSP1RX (12 + IH2_BASE) -#define INT_730_McBSP1RX_OF (13 + IH2_BASE) -#define INT_730_UART_MODEM_IRDA_2 (14 + IH2_BASE) -#define INT_730_UART_MODEM_1 (15 + IH2_BASE) -#define INT_730_MCSI (16 + IH2_BASE) -#define INT_730_uWireTX (17 + IH2_BASE) -#define INT_730_uWireRX (18 + IH2_BASE) -#define INT_730_SMC_CD (19 + IH2_BASE) -#define INT_730_SMC_IREQ (20 + IH2_BASE) -#define INT_730_HDQ_1WIRE (21 + IH2_BASE) -#define INT_730_TIMER32K (22 + IH2_BASE) -#define INT_730_MMC_SDIO (23 + IH2_BASE) -#define INT_730_UPLD (24 + IH2_BASE) -#define INT_730_USB_HHC_1 (27 + IH2_BASE) -#define INT_730_USB_HHC_2 (28 + IH2_BASE) -#define INT_730_USB_GENI (29 + IH2_BASE) -#define INT_730_USB_OTG (30 + IH2_BASE) -#define INT_730_CAMERA_IF (31 + IH2_BASE) -#define INT_730_RNG (32 + IH2_BASE) -#define INT_730_DUAL_MODE_TIMER (33 + IH2_BASE) -#define INT_730_DBB_RF_EN (34 + IH2_BASE) -#define INT_730_MPUIO_KEYPAD (35 + IH2_BASE) -#define INT_730_SHA1_MD5 (36 + IH2_BASE) -#define INT_730_SPI_100K_2 (37 + IH2_BASE) -#define INT_730_RNG_IDLE (38 + IH2_BASE) -#define INT_730_MPUIO (39 + IH2_BASE) -#define INT_730_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) -#define INT_730_LLPC_OE_FALLING (41 + IH2_BASE) -#define INT_730_LLPC_OE_RISING (42 + IH2_BASE) -#define INT_730_LLPC_VSYNC (43 + IH2_BASE) -#define INT_730_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_730_DMA_CH6 (53 + IH2_BASE) -#define INT_730_DMA_CH7 (54 + IH2_BASE) -#define INT_730_DMA_CH8 (55 + IH2_BASE) -#define INT_730_DMA_CH9 (56 + IH2_BASE) -#define INT_730_DMA_CH10 (57 + IH2_BASE) -#define INT_730_DMA_CH11 (58 + IH2_BASE) -#define INT_730_DMA_CH12 (59 + IH2_BASE) -#define INT_730_DMA_CH13 (60 + IH2_BASE) -#define INT_730_DMA_CH14 (61 + IH2_BASE) -#define INT_730_DMA_CH15 (62 + IH2_BASE) -#define INT_730_NAND (63 + IH2_BASE) - -/* - * OMAP-850 specific IRQ numbers for interrupt handler 2 + * OMAP-7xx specific IRQ numbers for interrupt handler 2 */ -#define INT_850_HW_ERRORS (0 + IH2_BASE) -#define INT_850_NFIQ_PWR_FAIL (1 + IH2_BASE) -#define INT_850_CFCD (2 + IH2_BASE) -#define INT_850_CFIREQ (3 + IH2_BASE) -#define INT_850_I2C (4 + IH2_BASE) -#define INT_850_PCC (5 + IH2_BASE) -#define INT_850_MPU_EXT_NIRQ (6 + IH2_BASE) -#define INT_850_SPI_100K_1 (7 + IH2_BASE) -#define INT_850_SYREN_SPI (8 + IH2_BASE) -#define INT_850_VLYNQ (9 + IH2_BASE) -#define INT_850_GPIO_BANK4 (10 + IH2_BASE) -#define INT_850_McBSP1TX (11 + IH2_BASE) -#define INT_850_McBSP1RX (12 + IH2_BASE) -#define INT_850_McBSP1RX_OF (13 + IH2_BASE) -#define INT_850_UART_MODEM_IRDA_2 (14 + IH2_BASE) -#define INT_850_UART_MODEM_1 (15 + IH2_BASE) -#define INT_850_MCSI (16 + IH2_BASE) -#define INT_850_uWireTX (17 + IH2_BASE) -#define INT_850_uWireRX (18 + IH2_BASE) -#define INT_850_SMC_CD (19 + IH2_BASE) -#define INT_850_SMC_IREQ (20 + IH2_BASE) -#define INT_850_HDQ_1WIRE (21 + IH2_BASE) -#define INT_850_TIMER32K (22 + IH2_BASE) -#define INT_850_MMC_SDIO (23 + IH2_BASE) -#define INT_850_UPLD (24 + IH2_BASE) -#define INT_850_USB_HHC_1 (27 + IH2_BASE) -#define INT_850_USB_HHC_2 (28 + IH2_BASE) -#define INT_850_USB_GENI (29 + IH2_BASE) -#define INT_850_USB_OTG (30 + IH2_BASE) -#define INT_850_CAMERA_IF (31 + IH2_BASE) -#define INT_850_RNG (32 + IH2_BASE) -#define INT_850_DUAL_MODE_TIMER (33 + IH2_BASE) -#define INT_850_DBB_RF_EN (34 + IH2_BASE) -#define INT_850_MPUIO_KEYPAD (35 + IH2_BASE) -#define INT_850_SHA1_MD5 (36 + IH2_BASE) -#define INT_850_SPI_100K_2 (37 + IH2_BASE) -#define INT_850_RNG_IDLE (38 + IH2_BASE) -#define INT_850_MPUIO (39 + IH2_BASE) -#define INT_850_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) -#define INT_850_LLPC_OE_FALLING (41 + IH2_BASE) -#define INT_850_LLPC_OE_RISING (42 + IH2_BASE) -#define INT_850_LLPC_VSYNC (43 + IH2_BASE) -#define INT_850_WAKE_UP_REQ (46 + IH2_BASE) -#define INT_850_DMA_CH6 (53 + IH2_BASE) -#define INT_850_DMA_CH7 (54 + IH2_BASE) -#define INT_850_DMA_CH8 (55 + IH2_BASE) -#define INT_850_DMA_CH9 (56 + IH2_BASE) -#define INT_850_DMA_CH10 (57 + IH2_BASE) -#define INT_850_DMA_CH11 (58 + IH2_BASE) -#define INT_850_DMA_CH12 (59 + IH2_BASE) -#define INT_850_DMA_CH13 (60 + IH2_BASE) -#define INT_850_DMA_CH14 (61 + IH2_BASE) -#define INT_850_DMA_CH15 (62 + IH2_BASE) -#define INT_850_NAND (63 + IH2_BASE) +#define INT_7XX_HW_ERRORS (0 + IH2_BASE) +#define INT_7XX_NFIQ_PWR_FAIL (1 + IH2_BASE) +#define INT_7XX_CFCD (2 + IH2_BASE) +#define INT_7XX_CFIREQ (3 + IH2_BASE) +#define INT_7XX_I2C (4 + IH2_BASE) +#define INT_7XX_PCC (5 + IH2_BASE) +#define INT_7XX_MPU_EXT_NIRQ (6 + IH2_BASE) +#define INT_7XX_SPI_100K_1 (7 + IH2_BASE) +#define INT_7XX_SYREN_SPI (8 + IH2_BASE) +#define INT_7XX_VLYNQ (9 + IH2_BASE) +#define INT_7XX_GPIO_BANK4 (10 + IH2_BASE) +#define INT_7XX_McBSP1TX (11 + IH2_BASE) +#define INT_7XX_McBSP1RX (12 + IH2_BASE) +#define INT_7XX_McBSP1RX_OF (13 + IH2_BASE) +#define INT_7XX_UART_MODEM_IRDA_2 (14 + IH2_BASE) +#define INT_7XX_UART_MODEM_1 (15 + IH2_BASE) +#define INT_7XX_MCSI (16 + IH2_BASE) +#define INT_7XX_uWireTX (17 + IH2_BASE) +#define INT_7XX_uWireRX (18 + IH2_BASE) +#define INT_7XX_SMC_CD (19 + IH2_BASE) +#define INT_7XX_SMC_IREQ (20 + IH2_BASE) +#define INT_7XX_HDQ_1WIRE (21 + IH2_BASE) +#define INT_7XX_TIMER32K (22 + IH2_BASE) +#define INT_7XX_MMC_SDIO (23 + IH2_BASE) +#define INT_7XX_UPLD (24 + IH2_BASE) +#define INT_7XX_USB_HHC_1 (27 + IH2_BASE) +#define INT_7XX_USB_HHC_2 (28 + IH2_BASE) +#define INT_7XX_USB_GENI (29 + IH2_BASE) +#define INT_7XX_USB_OTG (30 + IH2_BASE) +#define INT_7XX_CAMERA_IF (31 + IH2_BASE) +#define INT_7XX_RNG (32 + IH2_BASE) +#define INT_7XX_DUAL_MODE_TIMER (33 + IH2_BASE) +#define INT_7XX_DBB_RF_EN (34 + IH2_BASE) +#define INT_7XX_MPUIO_KEYPAD (35 + IH2_BASE) +#define INT_7XX_SHA1_MD5 (36 + IH2_BASE) +#define INT_7XX_SPI_100K_2 (37 + IH2_BASE) +#define INT_7XX_RNG_IDLE (38 + IH2_BASE) +#define INT_7XX_MPUIO (39 + IH2_BASE) +#define INT_7XX_LLPC_LCD_CTRL_CAN_BE_OFF (40 + IH2_BASE) +#define INT_7XX_LLPC_OE_FALLING (41 + IH2_BASE) +#define INT_7XX_LLPC_OE_RISING (42 + IH2_BASE) +#define INT_7XX_LLPC_VSYNC (43 + IH2_BASE) +#define INT_7XX_WAKE_UP_REQ (46 + IH2_BASE) +#define INT_7XX_DMA_CH6 (53 + IH2_BASE) +#define INT_7XX_DMA_CH7 (54 + IH2_BASE) +#define INT_7XX_DMA_CH8 (55 + IH2_BASE) +#define INT_7XX_DMA_CH9 (56 + IH2_BASE) +#define INT_7XX_DMA_CH10 (57 + IH2_BASE) +#define INT_7XX_DMA_CH11 (58 + IH2_BASE) +#define INT_7XX_DMA_CH12 (59 + IH2_BASE) +#define INT_7XX_DMA_CH13 (60 + IH2_BASE) +#define INT_7XX_DMA_CH14 (61 + IH2_BASE) +#define INT_7XX_DMA_CH15 (62 + IH2_BASE) +#define INT_7XX_NAND (63 + IH2_BASE) #define INT_24XX_SYS_NIRQ 7 #define INT_24XX_SDMA_IRQ0 12 diff --git a/arch/arm/plat-omap/include/mach/mcbsp.h b/arch/arm/plat-omap/include/mach/mcbsp.h index e0d6eca222c..7e9cae3e3d1 100644 --- a/arch/arm/plat-omap/include/mach/mcbsp.h +++ b/arch/arm/plat-omap/include/mach/mcbsp.h @@ -30,8 +30,8 @@ #include <mach/hardware.h> #include <mach/clock.h> -#define OMAP730_MCBSP1_BASE 0xfffb1000 -#define OMAP730_MCBSP2_BASE 0xfffb1800 +#define OMAP7XX_MCBSP1_BASE 0xfffb1000 +#define OMAP7XX_MCBSP2_BASE 0xfffb1800 #define OMAP1510_MCBSP1_BASE 0xe1011800 #define OMAP1510_MCBSP2_BASE 0xfffb1000 @@ -58,7 +58,7 @@ #define OMAP44XX_MCBSP3_BASE 0x49026000 #define OMAP44XX_MCBSP4_BASE 0x48074000 -#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) +#if defined(CONFIG_ARCH_OMAP15XX) || defined(CONFIG_ARCH_OMAP16XX) || defined(CONFIG_ARCH_OMAP730) || defined(CONFIG_ARCH_OMAP850) #define OMAP_MCBSP_REG_DRR2 0x00 #define OMAP_MCBSP_REG_DRR1 0x02 diff --git a/arch/arm/plat-omap/include/mach/mux.h b/arch/arm/plat-omap/include/mach/mux.h index 0f49d2d563d..f3c1d8a9045 100644 --- a/arch/arm/plat-omap/include/mach/mux.h +++ b/arch/arm/plat-omap/include/mach/mux.h @@ -51,23 +51,13 @@ .pu_pd_reg = PU_PD_SEL_##reg, \ .pu_pd_val = status, -#define MUX_REG_730(reg, mode_offset, mode) .mux_reg_name = "OMAP730_IO_CONF_"#reg, \ - .mux_reg = OMAP730_IO_CONF_##reg, \ +#define MUX_REG_7XX(reg, mode_offset, mode) .mux_reg_name = "OMAP7XX_IO_CONF_"#reg, \ + .mux_reg = OMAP7XX_IO_CONF_##reg, \ .mask_offset = mode_offset, \ .mask = mode, -#define PULL_REG_730(reg, bit, status) .pull_name = "OMAP730_IO_CONF_"#reg, \ - .pull_reg = OMAP730_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#define MUX_REG_850(reg, mode_offset, mode) .mux_reg_name = "OMAP850_IO_CONF_"#reg, \ - .mux_reg = OMAP850_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_850(reg, bit, status) .pull_name = "OMAP850_IO_CONF_"#reg, \ - .pull_reg = OMAP850_IO_CONF_##reg, \ +#define PULL_REG_7XX(reg, bit, status) .pull_name = "OMAP7XX_IO_CONF_"#reg, \ + .pull_reg = OMAP7XX_IO_CONF_##reg, \ .pull_bit = bit, \ .pull_val = status, @@ -84,21 +74,12 @@ #define PU_PD_REG(reg, status) .pu_pd_reg = PU_PD_SEL_##reg, \ .pu_pd_val = status, -#define MUX_REG_730(reg, mode_offset, mode) \ - .mux_reg = OMAP730_IO_CONF_##reg, \ +#define MUX_REG_7XX(reg, mode_offset, mode) \ + .mux_reg = OMAP7XX_IO_CONF_##reg, \ .mask_offset = mode_offset, \ .mask = mode, -#define PULL_REG_730(reg, bit, status) .pull_reg = OMAP730_IO_CONF_##reg, \ - .pull_bit = bit, \ - .pull_val = status, - -#define MUX_REG_850(reg, mode_offset, mode) \ - .mux_reg = OMAP850_IO_CONF_##reg, \ - .mask_offset = mode_offset, \ - .mask = mode, - -#define PULL_REG_850(reg, bit, status) .pull_reg = OMAP850_IO_CONF_##reg, \ +#define PULL_REG_7XX(reg, bit, status) .pull_reg = OMAP7XX_IO_CONF_##reg, \ .pull_bit = bit, \ .pull_val = status, @@ -118,32 +99,21 @@ /* * OMAP730/850 has a slightly different config for the pin mux. - * - config regs are the OMAP730_IO_CONF_x regs (see omap730.h) regs and + * - config regs are the OMAP7XX_IO_CONF_x regs (see omap730.h) regs and * not the FUNC_MUX_CTRL_x regs from hardware.h * - for pull-up/down, only has one enable bit which is is in the same register * as mux config */ -#define MUX_CFG_730(desc, mux_reg, mode_offset, mode, \ +#define MUX_CFG_7XX(desc, mux_reg, mode_offset, mode, \ pull_bit, pull_status, debug_status)\ { \ .name = desc, \ .debug = debug_status, \ - MUX_REG_730(mux_reg, mode_offset, mode) \ - PULL_REG_730(mux_reg, pull_bit, pull_status) \ + MUX_REG_7XX(mux_reg, mode_offset, mode) \ + PULL_REG_7XX(mux_reg, pull_bit, pull_status) \ PU_PD_REG(NA, 0) \ }, -#define MUX_CFG_850(desc, mux_reg, mode_offset, mode, \ - pull_bit, pull_status, debug_status)\ -{ \ - .name = desc, \ - .debug = debug_status, \ - MUX_REG_850(mux_reg, mode_offset, mode) \ - PULL_REG_850(mux_reg, pull_bit, pull_status) \ - PU_PD_REG(NA, 0) \ -}, - - #define MUX_CFG_24XX(desc, reg_offset, mode, \ pull_en, pull_mode, dbg) \ { \ @@ -232,45 +202,25 @@ struct pin_config { }; -enum omap730_index { +enum omap7xx_index { /* OMAP 730 keyboard */ - E2_730_KBR0, - J7_730_KBR1, - E1_730_KBR2, - F3_730_KBR3, - D2_730_KBR4, - C2_730_KBC0, - D3_730_KBC1, - E4_730_KBC2, - F4_730_KBC3, - E3_730_KBC4, - - /* USB */ - AA17_730_USB_DM, - W16_730_USB_PU_EN, - W17_730_USB_VBUSI, -}; - -enum omap850_index { - /* OMAP 850 keyboard */ - E2_850_KBR0, - J7_850_KBR1, - E1_850_KBR2, - F3_850_KBR3, - D2_850_KBR4, - C2_850_KBC0, - D3_850_KBC1, - E4_850_KBC2, - F4_850_KBC3, - E3_850_KBC4, + E2_7XX_KBR0, + J7_7XX_KBR1, + E1_7XX_KBR2, + F3_7XX_KBR3, + D2_7XX_KBR4, + C2_7XX_KBC0, + D3_7XX_KBC1, + E4_7XX_KBC2, + F4_7XX_KBC3, + E3_7XX_KBC4, /* USB */ - AA17_850_USB_DM, - W16_850_USB_PU_EN, - W17_850_USB_VBUSI, + AA17_7XX_USB_DM, + W16_7XX_USB_PU_EN, + W17_7XX_USB_VBUSI, }; - enum omap1xxx_index { /* UART1 (BT_UART_GATING)*/ UART1_TX = 0, diff --git a/arch/arm/plat-omap/include/mach/omap7xx.h b/arch/arm/plat-omap/include/mach/omap7xx.h new file mode 100644 index 00000000000..53f52414b0e --- /dev/null +++ b/arch/arm/plat-omap/include/mach/omap7xx.h @@ -0,0 +1,104 @@ +/* arch/arm/plat-omap/include/mach/omap7xx.h + * + * Hardware definitions for TI OMAP7XX processor. + * + * Cleanup for Linux-2.6 by Dirk Behme <dirk.behme@de.bosch.com> + * Adapted for omap850 by Zebediah C. McClure <zmc@lurian.net> + * Adapted for omap7xx by Alistair Buxton <a.j.buxton@gmail.com> + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + * + * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED + * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF + * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN + * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, + * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT + * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF + * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON + * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT + * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF + * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + * + * You should have received a copy of the GNU General Public License along + * with this program; if not, write to the Free Software Foundation, Inc., + * 675 Mass Ave, Cambridge, MA 02139, USA. + */ + +#ifndef __ASM_ARCH_OMAP7XX_H +#define __ASM_ARCH_OMAP7XX_H + +/* + * ---------------------------------------------------------------------------- + * Base addresses + * ---------------------------------------------------------------------------- + */ + +/* Syntax: XX_BASE = Virtual base address, XX_START = Physical base address */ + +#define OMAP7XX_DSP_BASE 0xE0000000 +#define OMAP7XX_DSP_SIZE 0x50000 +#define OMAP7XX_DSP_START 0xE0000000 + +#define OMAP7XX_DSPREG_BASE 0xE1000000 +#define OMAP7XX_DSPREG_SIZE SZ_128K +#define OMAP7XX_DSPREG_START 0xE1000000 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX specific configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_CONFIG_BASE 0xfffe1000 +#define OMAP7XX_IO_CONF_0 0xfffe1070 +#define OMAP7XX_IO_CONF_1 0xfffe1074 +#define OMAP7XX_IO_CONF_2 0xfffe1078 +#define OMAP7XX_IO_CONF_3 0xfffe107c +#define OMAP7XX_IO_CONF_4 0xfffe1080 +#define OMAP7XX_IO_CONF_5 0xfffe1084 +#define OMAP7XX_IO_CONF_6 0xfffe1088 +#define OMAP7XX_IO_CONF_7 0xfffe108c +#define OMAP7XX_IO_CONF_8 0xfffe1090 +#define OMAP7XX_IO_CONF_9 0xfffe1094 +#define OMAP7XX_IO_CONF_10 0xfffe1098 +#define OMAP7XX_IO_CONF_11 0xfffe109c +#define OMAP7XX_IO_CONF_12 0xfffe10a0 +#define OMAP7XX_IO_CONF_13 0xfffe10a4 + +#define OMAP7XX_MODE_1 0xfffe1010 +#define OMAP7XX_MODE_2 0xfffe1014 + +/* CSMI specials: in terms of base + offset */ +#define OMAP7XX_MODE2_OFFSET 0x14 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX traffic controller configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_FLASH_CFG_0 0xfffecc10 +#define OMAP7XX_FLASH_ACFG_0 0xfffecc50 +#define OMAP7XX_FLASH_CFG_1 0xfffecc14 +#define OMAP7XX_FLASH_ACFG_1 0xfffecc54 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX DSP control registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_ICR_BASE 0xfffbb800 +#define OMAP7XX_DSP_M_CTL 0xfffbb804 +#define OMAP7XX_DSP_MMU_BASE 0xfffed200 + +/* + * ---------------------------------------------------------------------------- + * OMAP7XX PCC_UPLD configuration registers + * ---------------------------------------------------------------------------- + */ +#define OMAP7XX_PCC_UPLD_CTRL_BASE (0xfffe0900) +#define OMAP7XX_PCC_UPLD_CTRL (OMAP7XX_PCC_UPLD_CTRL_BASE + 0x00) + +#endif /* __ASM_ARCH_OMAP7XX_H */ + diff --git a/arch/arm/plat-omap/include/mach/uncompress.h b/arch/arm/plat-omap/include/mach/uncompress.h index 0814c5f210c..ddf7b88dec4 100644 --- a/arch/arm/plat-omap/include/mach/uncompress.h +++ b/arch/arm/plat-omap/include/mach/uncompress.h @@ -25,6 +25,7 @@ unsigned int system_rev; #define UART_OMAP_MDR1 0x08 /* mode definition register */ #define OMAP_ID_730 0x355F +#define OMAP_ID_850 0x362C #define ID_MASK 0x7fff #define check_port(base, shift) ((base[UART_OMAP_MDR1 << shift] & 7) == 0) #define omap_get_id() ((*(volatile unsigned int *)(0xfffed404)) >> 12) & ID_MASK @@ -53,7 +54,7 @@ static void putc(int c) /* MMU is not on, so cpu_is_omapXXXX() won't work here */ unsigned int omap_id = omap_get_id(); - if (omap_id == OMAP_ID_730) + if (omap_id == OMAP_ID_730 || omap_id == OMAP_ID_850) shift = 0; if (check_port(uart, shift)) diff --git a/arch/arm/plat-omap/io.c b/arch/arm/plat-omap/io.c index b6defa23e77..23a205f4a2b 100644 --- a/arch/arm/plat-omap/io.c +++ b/arch/arm/plat-omap/io.c @@ -13,7 +13,7 @@ #include <linux/io.h> #include <linux/mm.h> -#include <mach/omap730.h> +#include <mach/omap7xx.h> #include <mach/omap1510.h> #include <mach/omap16xx.h> #include <mach/omap24xx.h> @@ -33,13 +33,13 @@ void __iomem *omap_ioremap(unsigned long p, size_t size, unsigned int type) if (BETWEEN(p, OMAP1_IO_PHYS, OMAP1_IO_SIZE)) return XLATE(p, OMAP1_IO_PHYS, OMAP1_IO_VIRT); } - if (cpu_is_omap730()) { - if (BETWEEN(p, OMAP730_DSP_BASE, OMAP730_DSP_SIZE)) - return XLATE(p, OMAP730_DSP_BASE, OMAP730_DSP_START); + if (cpu_is_omap7xx()) { + if (BETWEEN(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_SIZE)) + return XLATE(p, OMAP7XX_DSP_BASE, OMAP7XX_DSP_START); - if (BETWEEN(p, OMAP730_DSPREG_BASE, OMAP730_DSPREG_SIZE)) - return XLATE(p, OMAP730_DSPREG_BASE, - OMAP730_DSPREG_START); + if (BETWEEN(p, OMAP7XX_DSPREG_BASE, OMAP7XX_DSPREG_SIZE)) + return XLATE(p, OMAP7XX_DSPREG_BASE, + OMAP7XX_DSPREG_START); } if (cpu_is_omap15xx()) { if (BETWEEN(p, OMAP1510_DSP_BASE, OMAP1510_DSP_SIZE)) diff --git a/arch/arm/plat-omap/usb.c b/arch/arm/plat-omap/usb.c index 509f2ed99e2..3c40b8525df 100644 --- a/arch/arm/plat-omap/usb.c +++ b/arch/arm/plat-omap/usb.c @@ -614,8 +614,8 @@ omap_otg_init(struct omap_usb_config *config) if (config->otg || config->register_host) { syscon &= ~HST_IDLE_EN; ohci_device.dev.platform_data = config; - if (cpu_is_omap730()) - ohci_resources[1].start = INT_730_USB_HHC_1; + if (cpu_is_omap7xx()) + ohci_resources[1].start = INT_7XX_USB_HHC_1; status = platform_device_register(&ohci_device); if (status) pr_debug("can't register OHCI device, %d\n", status); @@ -626,8 +626,8 @@ omap_otg_init(struct omap_usb_config *config) if (config->otg) { syscon &= ~OTG_IDLE_EN; otg_device.dev.platform_data = config; - if (cpu_is_omap730()) - otg_resources[1].start = INT_730_USB_OTG; + if (cpu_is_omap7xx()) + otg_resources[1].start = INT_7XX_USB_OTG; status = platform_device_register(&otg_device); if (status) pr_debug("can't register OTG device, %d\n", status); @@ -731,7 +731,7 @@ static inline void omap_1510_usb_init(struct omap_usb_config *config) {} void __init omap_usb_init(struct omap_usb_config *pdata) { - if (cpu_is_omap730() || cpu_is_omap16xx() || cpu_is_omap24xx()) + if (cpu_is_omap7xx() || cpu_is_omap16xx() || cpu_is_omap24xx()) omap_otg_init(pdata); else if (cpu_is_omap15xx()) omap_1510_usb_init(pdata); diff --git a/drivers/spi/omap_uwire.c b/drivers/spi/omap_uwire.c index e75ba9b2889..7bcf409792c 100644 --- a/drivers/spi/omap_uwire.c +++ b/drivers/spi/omap_uwire.c @@ -52,7 +52,7 @@ #include <asm/mach-types.h> #include <mach/mux.h> -#include <mach/omap730.h> /* OMAP730_IO_CONF registers */ +#include <mach/omap7xx.h> /* OMAP7XX_IO_CONF registers */ /* FIXME address is now a platform device resource, @@ -504,7 +504,7 @@ static int __init uwire_probe(struct platform_device *pdev) } clk_enable(uwire->ck); - if (cpu_is_omap730()) + if (cpu_is_omap7xx()) uwire_idx_shift = 1; else uwire_idx_shift = 2; @@ -573,8 +573,8 @@ static int __init omap_uwire_init(void) } if (machine_is_omap_perseus2()) { /* configure pins: MPU_UW_nSCS1, MPU_UW_SDO, MPU_UW_SCLK */ - int val = omap_readl(OMAP730_IO_CONF_9) & ~0x00EEE000; - omap_writel(val | 0x00AAA000, OMAP730_IO_CONF_9); + int val = omap_readl(OMAP7XX_IO_CONF_9) & ~0x00EEE000; + omap_writel(val | 0x00AAA000, OMAP7XX_IO_CONF_9); } return platform_driver_probe(&uwire_driver, uwire_probe); |