diff options
69 files changed, 675 insertions, 3433 deletions
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig index c78b14380b3..130d825e543 100644 --- a/arch/mips/Kconfig +++ b/arch/mips/Kconfig @@ -10,7 +10,6 @@ menu "Machine selection" config ZONE_DMA bool - default y choice prompt "System type" @@ -165,7 +164,7 @@ config MIPS_COBALT select HW_HAS_PCI select I8259 select IRQ_CPU - select MIPS_GT64111 + select PCI_GT64XXX_PCI0 select SYS_HAS_CPU_NEVADA select SYS_HAS_EARLY_PRINTK select SYS_SUPPORTS_32BIT_KERNEL @@ -207,7 +206,7 @@ config MIPS_EV64120 depends on EXPERIMENTAL select DMA_NONCOHERENT select HW_HAS_PCI - select MIPS_GT64120 + select PCI_GT64XXX_PCI0 select SYS_HAS_CPU_R5000 select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_64BIT_KERNEL @@ -245,7 +244,7 @@ config LASAT select DMA_NONCOHERENT select SYS_HAS_EARLY_PRINTK select HW_HAS_PCI - select MIPS_GT64120 + select PCI_GT64XXX_PCI0 select MIPS_NILE4 select R5000_CPU_SCACHE select SYS_HAS_CPU_R5000 @@ -263,7 +262,7 @@ config MIPS_ATLAS select HW_HAS_PCI select MIPS_BOARDS_GEN select MIPS_BONITO64 - select MIPS_GT64120 + select PCI_GT64XXX_PCI0 select MIPS_MSC select RM7000_CPU_SCACHE select SWAP_IO_SPACE @@ -296,7 +295,7 @@ config MIPS_MALTA select MIPS_BOARDS_GEN select MIPS_BONITO64 select MIPS_CPU_SCACHE - select MIPS_GT64120 + select PCI_GT64XXX_PCI0 select MIPS_MSC select SWAP_IO_SPACE select SYS_HAS_CPU_MIPS32_R1 @@ -340,7 +339,7 @@ config WR_PPMC select BOOT_ELF32 select DMA_NONCOHERENT select HW_HAS_PCI - select MIPS_GT64120 + select PCI_GT64XXX_PCI0 select SWAP_IO_SPACE select SYS_HAS_CPU_MIPS32_R1 select SYS_HAS_CPU_MIPS32_R2 @@ -398,7 +397,7 @@ config MOMENCO_OCELOT select HW_HAS_PCI select IRQ_CPU select IRQ_CPU_RM7K - select MIPS_GT64120 + select PCI_GT64XXX_PCI0 select RM7000_CPU_SCACHE select SWAP_IO_SPACE select SYS_HAS_CPU_RM7000 @@ -501,10 +500,8 @@ config DDB5477 ether port USB, AC97, PCI, etc. config MACH_VR41XX - bool "NEC VR41XX-based machines" + bool "NEC VR4100 series based machines" select SYS_HAS_CPU_VR41XX - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_64BIT_KERNEL if EXPERIMENTAL select GENERIC_HARDIRQS_NO__DO_IRQ config PMC_YOSEMITE @@ -779,6 +776,7 @@ config TOSHIBA_JMR3927 select SYS_SUPPORTS_LITTLE_ENDIAN select SYS_SUPPORTS_BIG_ENDIAN select TOSHIBA_BOARDS + select GENERIC_HARDIRQS_NO__DO_IRQ config TOSHIBA_RBTX4927 bool "Toshiba TBTX49[23]7 board" @@ -922,6 +920,7 @@ config SYS_HAS_EARLY_PRINTK config GENERIC_ISA_DMA bool + select ZONE_DMA config I8259 bool @@ -945,6 +944,7 @@ config MIPS_DISABLE_OBSOLETE_IDE config GENERIC_ISA_DMA_SUPPORT_BROKEN bool + select ZONE_DMA # # Endianess selection. Sufficiently obscure so many users don't know what to @@ -999,10 +999,7 @@ config DDB5XXX_COMMON config MIPS_BOARDS_GEN bool -config MIPS_GT64111 - bool - -config MIPS_GT64120 +config PCI_GT64XXX_PCI0 bool config MIPS_TX3927 diff --git a/arch/mips/Makefile b/arch/mips/Makefile index 92bca6ad6ab..f2f742df32c 100644 --- a/arch/mips/Makefile +++ b/arch/mips/Makefile @@ -530,25 +530,29 @@ cflags-$(CONFIG_SGI_IP32) += -Iinclude/asm-mips/mach-ip32 load-$(CONFIG_SGI_IP32) += 0xffffffff80004000 # -# Sibyte SB1250 SOC +# Sibyte SB1250/BCM1480 SOC # # This is a LIB so that it links at the end, and initcalls are later # the sequence; but it is built as an object so that modules don't get # removed (as happens, even if they have __initcall/module_init) # core-$(CONFIG_SIBYTE_BCM112X) += arch/mips/sibyte/sb1250/ +core-$(CONFIG_SIBYTE_BCM112X) += arch/mips/sibyte/common/ cflags-$(CONFIG_SIBYTE_BCM112X) += -Iinclude/asm-mips/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL core-$(CONFIG_SIBYTE_SB1250) += arch/mips/sibyte/sb1250/ +core-$(CONFIG_SIBYTE_SB1250) += arch/mips/sibyte/common/ cflags-$(CONFIG_SIBYTE_SB1250) += -Iinclude/asm-mips/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1250_112x_ALL core-$(CONFIG_SIBYTE_BCM1x55) += arch/mips/sibyte/bcm1480/ +core-$(CONFIG_SIBYTE_BCM1x55) += arch/mips/sibyte/common/ cflags-$(CONFIG_SIBYTE_BCM1x55) += -Iinclude/asm-mips/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL core-$(CONFIG_SIBYTE_BCM1x80) += arch/mips/sibyte/bcm1480/ +core-$(CONFIG_SIBYTE_BCM1x80) += arch/mips/sibyte/common/ cflags-$(CONFIG_SIBYTE_BCM1x80) += -Iinclude/asm-mips/mach-sibyte \ -DSIBYTE_HDR_FEATURES=SIBYTE_HDR_FMASK_1480_ALL diff --git a/arch/mips/basler/excite/excite_setup.c b/arch/mips/basler/excite/excite_setup.c index 42f0eda1d51..2f0e4c08eb0 100644 --- a/arch/mips/basler/excite/excite_setup.c +++ b/arch/mips/basler/excite/excite_setup.c @@ -63,7 +63,7 @@ volatile void __iomem * const ocd_base = (void *) (EXCITE_ADDR_OCD); volatile void __iomem * const titan_base = (void *) (EXCITE_ADDR_TITAN); /* Protect access to shared GPI registers */ -spinlock_t titan_lock = SPIN_LOCK_UNLOCKED; +DEFINE_SPINLOCK(titan_lock); int titan_irqflags; diff --git a/arch/mips/cobalt/Makefile b/arch/mips/cobalt/Makefile index b36dd8f538f..de017c11f9b 100644 --- a/arch/mips/cobalt/Makefile +++ b/arch/mips/cobalt/Makefile @@ -4,5 +4,6 @@ obj-y := irq.o reset.o setup.o +obj-$(CONFIG_PCI) += pci.o obj-$(CONFIG_EARLY_PRINTK) += console.o obj-$(CONFIG_MTD_PHYSMAP) += mtd.o diff --git a/arch/mips/cobalt/console.c b/arch/mips/cobalt/console.c index ca56b415b8a..0485d51f721 100644 --- a/arch/mips/cobalt/console.c +++ b/arch/mips/cobalt/console.c @@ -1,13 +1,11 @@ /* * (C) P. Horton 2006 */ - -#include <linux/init.h> -#include <linux/kernel.h> -#include <linux/console.h> #include <linux/serial_reg.h> + #include <asm/addrspace.h> -#include <asm/mach-cobalt/cobalt.h> + +#include <cobalt.h> void prom_putchar(char c) { diff --git a/arch/mips/cobalt/irq.c b/arch/mips/cobalt/irq.c index fe93b846923..950ad1e8be4 100644 --- a/arch/mips/cobalt/irq.c +++ b/arch/mips/cobalt/irq.c @@ -17,7 +17,7 @@ #include <asm/irq_cpu.h> #include <asm/gt64120.h> -#include <asm/mach-cobalt/cobalt.h> +#include <cobalt.h> /* * We have two types of interrupts that we handle, ones that come in through diff --git a/arch/mips/cobalt/pci.c b/arch/mips/cobalt/pci.c new file mode 100644 index 00000000000..d91027f43de --- /dev/null +++ b/arch/mips/cobalt/pci.c @@ -0,0 +1,47 @@ +/* + * Register PCI controller. + * + * This file is subject to the terms and conditions of the GNU General Public + * License. See the file "COPYING" in the main directory of this archive + * for more details. + * + * Copyright (C) 1996, 1997, 2004, 05 by Ralf Baechle (ralf@linux-mips.org) + * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv) + * + */ +#include <linux/init.h> +#include <linux/pci.h> + +#include <asm/gt64120.h> + +extern struct pci_ops gt64xxx_pci0_ops; + +static struct resource cobalt_mem_resource = { + .start = GT_DEF_PCI0_MEM0_BASE, + .end = GT_DEF_PCI0_MEM0_BASE + GT_DEF_PCI0_MEM0_SIZE - 1, + .name = "PCI memory", + .flags = IORESOURCE_MEM, +}; + +static struct resource cobalt_io_resource = { + .start = 0x1000, + .end = GT_DEF_PCI0_IO_SIZE - 1, + .name = "PCI I/O", + .flags = IORESOURCE_IO, +}; + +static struct pci_controller cobalt_pci_controller = { + .pci_ops = >64xxx_pci0_ops, + .mem_resource = &cobalt_mem_resource, + .io_resource = &cobalt_io_resource, + .io_offset = 0 - GT_DEF_PCI0_IO_BASE, +}; + +static int __init cobalt_pci_init(void) +{ + register_pci_controller(&cobalt_pci_controller); + + return 0; +} + +arch_initcall(cobalt_pci_init); diff --git a/arch/mips/cobalt/reset.c b/arch/mips/cobalt/reset.c index 753dfccae6f..43cca21fdbc 100644 --- a/arch/mips/cobalt/reset.c +++ b/arch/mips/cobalt/reset.c @@ -8,15 +8,12 @@ * Copyright (C) 1995, 1996, 1997 by Ralf Baechle * Copyright (C) 2001 by Liam Davies (ldavies@agile.tv) */ -#include <linux/sched.h> -#include <linux/mm.h> -#include <asm/cacheflush.h> +#include <linux/jiffies.h> + #include <asm/io.h> -#include <asm/processor.h> #include <asm/reboot.h> -#include <asm/system.h> -#include <asm/mipsregs.h> -#include <asm/mach-cobalt/cobalt.h> + +#include <cobalt.h> void cobalt_machine_halt(void) { diff --git a/arch/mips/cobalt/setup.c b/arch/mips/cobalt/setup.c index 88d34f11385..d0dd81790f7 100644 --- a/arch/mips/cobalt/setup.c +++ b/arch/mips/cobalt/setup.c @@ -19,12 +19,10 @@ #include <asm/bootinfo.h> #include <asm/time.h> #include <asm/io.h> -#include <asm/irq.h> -#include <asm/processor.h> #include <asm/reboot.h> #include <asm/gt64120.h> -#include <asm/mach-cobalt/cobalt.h> +#include <cobalt.h> extern void cobalt_machine_restart(char *command); extern void cobalt_machine_halt(void); @@ -63,22 +61,6 @@ void __init plat_timer_setup(struct irqaction *irq) GT_WRITE(GT_INTRMASK_OFS, GT_INTR_T0EXP_MSK | GT_READ(GT_INTRMASK_OFS)); } -extern struct pci_ops gt64111_pci_ops; - -static struct resource cobalt_mem_resource = { - .start = GT_DEF_PCI0_MEM0_BASE, - .end = GT_DEF_PCI0_MEM0_BASE + GT_DEF_PCI0_MEM0_SIZE - 1, - .name = "PCI memory", - .flags = IORESOURCE_MEM -}; - -static struct resource cobalt_io_resource = { - .start = 0x1000, - .end = 0xffff, - .name = "PCI I/O", - .flags = IORESOURCE_IO -}; - /* * Cobalt doesn't have PS/2 keyboard/mouse interfaces, * keyboard conntroller is never used. @@ -111,14 +93,6 @@ static struct resource cobalt_reserved_resources[] = { }, }; -static struct pci_controller cobalt_pci_controller = { - .pci_ops = >64111_pci_ops, - .mem_resource = &cobalt_mem_resource, - .mem_offset = 0, - .io_resource = &cobalt_io_resource, - .io_offset = 0 - GT_DEF_PCI0_IO_BASE, -}; - void __init plat_mem_setup(void) { static struct uart_port uart; @@ -146,10 +120,6 @@ void __init plat_mem_setup(void) printk("Cobalt board ID: %d\n", cobalt_board_id); -#ifdef CONFIG_PCI - register_pci_controller(&cobalt_pci_controller); -#endif - if (cobalt_board_id > COBALT_BRD_ID_RAQ1) { #ifdef CONFIG_SERIAL_8250 uart.line = 0; diff --git a/arch/mips/configs/jmr3927_defconfig b/arch/mips/configs/jmr3927_defconfig index 21a094752da..068e48ec709 100644 --- a/arch/mips/configs/jmr3927_defconfig +++ b/arch/mips/configs/jmr3927_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:34 2007 +# Linux kernel version: 2.6.21-rc3 +# Thu Mar 15 00:40:40 2007 # CONFIG_MIPS=y @@ -70,7 +70,7 @@ CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y CONFIG_GENERIC_TIME=y CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_DMA_NONCOHERENT=y CONFIG_DMA_NEED_PCI_MAP_STATE=y CONFIG_CPU_BIG_ENDIAN=y @@ -138,12 +138,12 @@ CONFIG_ZONE_DMA_FLAG=1 # CONFIG_HZ_48 is not set # CONFIG_HZ_100 is not set # CONFIG_HZ_128 is not set -# CONFIG_HZ_250 is not set +CONFIG_HZ_250=y # CONFIG_HZ_256 is not set -CONFIG_HZ_1000=y +# CONFIG_HZ_1000 is not set # CONFIG_HZ_1024 is not set CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=1000 +CONFIG_HZ=250 CONFIG_PREEMPT_NONE=y # CONFIG_PREEMPT_VOLUNTARY is not set # CONFIG_PREEMPT is not set @@ -175,14 +175,15 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_AUDIT is not set # CONFIG_IKCONFIG is not set CONFIG_SYSFS_DEPRECATED=y -CONFIG_RELAY=y +# CONFIG_RELAY is not set +# CONFIG_BLK_DEV_INITRD is not set # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set CONFIG_SYSCTL=y CONFIG_EMBEDDED=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y +# CONFIG_HOTPLUG is not set CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y @@ -217,11 +218,11 @@ CONFIG_IOSCHED_NOOP=y CONFIG_IOSCHED_AS=y CONFIG_IOSCHED_DEADLINE=y CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_AS is not set # CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set +CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_DEFAULT_IOSCHED="cfq" # # Bus options (PCI, PCMCIA, EISA, ISA, TC) @@ -233,12 +234,10 @@ CONFIG_MMU=y # # PCCARD (PCMCIA/CardBus) support # -# CONFIG_PCCARD is not set # # PCI Hotplug Support # -# CONFIG_HOTPLUG_PCI is not set # # Executable file formats @@ -250,10 +249,7 @@ CONFIG_TRAD_SIGNALS=y # # Power management options # -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set +# CONFIG_PM is not set # # Networking @@ -267,12 +263,7 @@ CONFIG_NET=y CONFIG_PACKET=y # CONFIG_PACKET_MMAP is not set CONFIG_UNIX=y -CONFIG_XFRM=y -CONFIG_XFRM_USER=y -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -CONFIG_NET_KEY=y -CONFIG_NET_KEY_MIGRATE=y +# CONFIG_NET_KEY is not set CONFIG_INET=y # CONFIG_IP_MULTICAST is not set # CONFIG_IP_ADVANCED_ROUTER is not set @@ -290,19 +281,18 @@ CONFIG_IP_PNP_BOOTP=y # CONFIG_INET_IPCOMP is not set # CONFIG_INET_XFRM_TUNNEL is not set # CONFIG_INET_TUNNEL is not set -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_DIAG is not set # CONFIG_TCP_CONG_ADVANCED is not set CONFIG_TCP_CONG_CUBIC=y CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y +# CONFIG_TCP_MD5SIG is not set # CONFIG_IPV6 is not set # CONFIG_INET6_XFRM_TUNNEL is not set # CONFIG_INET6_TUNNEL is not set -CONFIG_NETWORK_SECMARK=y +# CONFIG_NETWORK_SECMARK is not set # CONFIG_NETFILTER is not set # @@ -343,13 +333,7 @@ CONFIG_NETWORK_SECMARK=y # CONFIG_HAMRADIO is not set # CONFIG_IRDA is not set # CONFIG_BT is not set -CONFIG_IEEE80211=y -# CONFIG_IEEE80211_DEBUG is not set -CONFIG_IEEE80211_CRYPT_WEP=y -CONFIG_IEEE80211_CRYPT_CCMP=y -CONFIG_IEEE80211_SOFTMAC=y -# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set -CONFIG_WIRELESS_EXT=y +# CONFIG_IEEE80211 is not set # # Device Drivers @@ -360,14 +344,12 @@ CONFIG_WIRELESS_EXT=y # CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y # CONFIG_SYS_HYPERVISOR is not set # # Connector - unified userspace <-> kernelspace linker # -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y +# CONFIG_CONNECTOR is not set # # Memory Technology Devices (MTD) @@ -396,16 +378,13 @@ CONFIG_PROC_EVENTS=y # CONFIG_BLK_DEV_NBD is not set # CONFIG_BLK_DEV_SX8 is not set # CONFIG_BLK_DEV_RAM is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CDROM_PKTCDVD=y -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=y +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set # # Misc devices # -CONFIG_SGI_IOC4=y +# CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set # @@ -416,7 +395,7 @@ CONFIG_SGI_IOC4=y # # SCSI device support # -CONFIG_RAID_ATTRS=y +# CONFIG_RAID_ATTRS is not set # CONFIG_SCSI is not set # CONFIG_SCSI_NETLINK is not set @@ -462,26 +441,13 @@ CONFIG_NETDEVICES=y # # PHY device support # -CONFIG_PHYLIB=y - -# -# MII PHY device drivers -# -CONFIG_MARVELL_PHY=y -CONFIG_DAVICOM_PHY=y -CONFIG_QSEMI_PHY=y -CONFIG_LXT_PHY=y -CONFIG_CICADA_PHY=y -CONFIG_VITESSE_PHY=y -CONFIG_SMSC_PHY=y -# CONFIG_BROADCOM_PHY is not set -# CONFIG_FIXED_PHY is not set +# CONFIG_PHYLIB is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y -# CONFIG_MII is not set +CONFIG_MII=y # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set # CONFIG_CASSINI is not set @@ -493,7 +459,27 @@ CONFIG_NET_ETHERNET=y # # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set -# CONFIG_NET_PCI is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +CONFIG_TC35815=y +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +# CONFIG_E100 is not set +# CONFIG_FEALNX is not set +# CONFIG_NATSEMI is not set +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +# CONFIG_8139TOO is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_SC92031 is not set # # Ethernet (1000 Mbit) @@ -509,20 +495,21 @@ CONFIG_NET_ETHERNET=y # CONFIG_SKGE is not set # CONFIG_SKY2 is not set # CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set # CONFIG_TIGON3 is not set # CONFIG_BNX2 is not set -CONFIG_QLA3XXX=y +# CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # # Ethernet (10000 Mbit) # # CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=y +# CONFIG_CHELSIO_T3 is not set # CONFIG_IXGB is not set # CONFIG_S2IO is not set # CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=y +# CONFIG_NETXEN_NIC is not set # # Token Ring devices @@ -566,10 +553,7 @@ CONFIG_INPUT=y # # Userland interfaces # -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_MOUSEDEV is not set # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set @@ -587,21 +571,13 @@ CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # # Hardware I/O ports # -CONFIG_SERIO=y -# CONFIG_SERIO_I8042 is not set -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -# CONFIG_SERIO_LIBPS2 is not set -CONFIG_SERIO_RAW=y +# CONFIG_SERIO is not set # CONFIG_GAMEPORT is not set # # Character devices # -CONFIG_VT=y -CONFIG_VT_CONSOLE=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y +# CONFIG_VT is not set CONFIG_SERIAL_NONSTANDARD=y # CONFIG_COMPUTONE is not set # CONFIG_ROCKETPORT is not set @@ -609,7 +585,7 @@ CONFIG_SERIAL_NONSTANDARD=y # CONFIG_DIGIEPCA is not set # CONFIG_MOXA_INTELLIO is not set # CONFIG_MOXA_SMARTIO is not set -CONFIG_MOXA_SMARTIO_NEW=y +# CONFIG_MOXA_SMARTIO_NEW is not set # CONFIG_ISI is not set # CONFIG_SYNCLINKMP is not set # CONFIG_SYNCLINK_GT is not set @@ -629,11 +605,12 @@ CONFIG_MOXA_SMARTIO_NEW=y # Non-8250 serial port support # CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_TXX9=y CONFIG_HAS_TXX9_SERIAL=y CONFIG_SERIAL_TXX9_NR_UARTS=6 -# CONFIG_SERIAL_TXX9_CONSOLE is not set -# CONFIG_SERIAL_TXX9_STDSERIAL is not set +CONFIG_SERIAL_TXX9_CONSOLE=y +CONFIG_SERIAL_TXX9_STDSERIAL=y # CONFIG_SERIAL_JSM is not set # CONFIG_UNIX98_PTYS is not set CONFIG_LEGACY_PTYS=y @@ -685,6 +662,11 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_HWMON_VID is not set # +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# # Multimedia devices # # CONFIG_VIDEO_DEV is not set @@ -697,51 +679,8 @@ CONFIG_LEGACY_PTY_COUNT=256 # # Graphics support # -# CONFIG_FIRMWARE_EDID is not set -CONFIG_FB=y -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_SMIVGX is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE is not set - -# -# Logo configuration -# -# CONFIG_LOGO is not set # CONFIG_BACKLIGHT_LCD_SUPPORT is not set +# CONFIG_FB is not set # # Sound @@ -864,7 +803,7 @@ CONFIG_INOTIFY_USER=y CONFIG_DNOTIFY=y # CONFIG_AUTOFS_FS is not set # CONFIG_AUTOFS4_FS is not set -CONFIG_FUSE_FS=y +# CONFIG_FUSE_FS is not set # # CD-ROM/DVD Filesystems @@ -889,14 +828,13 @@ CONFIG_SYSFS=y # CONFIG_TMPFS is not set # CONFIG_HUGETLB_PAGE is not set CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=y +# CONFIG_CONFIGFS_FS is not set # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set -# CONFIG_ECRYPT_FS is not set # CONFIG_HFS_FS is not set # CONFIG_HFSPLUS_FS is not set # CONFIG_BEFS_FS is not set @@ -944,10 +882,7 @@ CONFIG_MSDOS_PARTITION=y # # Distributed Lock Manager # -CONFIG_DLM=y -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set +# CONFIG_DLM is not set # # Profiling support @@ -972,65 +907,22 @@ CONFIG_CMDLINE="" # # Security options # -CONFIG_KEYS=y -CONFIG_KEYS_DEBUG_PROC_KEYS=y +# CONFIG_KEYS is not set # CONFIG_SECURITY is not set # # Cryptographic options # -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_MD4=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_WP512=y -CONFIG_CRYPTO_TGR192=y -CONFIG_CRYPTO_GF128MUL=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_LRW=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=y -CONFIG_CRYPTO_BLOWFISH=y -CONFIG_CRYPTO_TWOFISH=y -CONFIG_CRYPTO_TWOFISH_COMMON=y -CONFIG_CRYPTO_SERPENT=y -CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_CAST5=y -CONFIG_CRYPTO_CAST6=y -CONFIG_CRYPTO_TEA=y -CONFIG_CRYPTO_ARC4=y -CONFIG_CRYPTO_KHAZAD=y -CONFIG_CRYPTO_ANUBIS=y -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_MICHAEL_MIC=y -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CAMELLIA=y - -# -# Hardware crypto devices -# +# CONFIG_CRYPTO is not set # # Library routines # CONFIG_BITREVERSE=y # CONFIG_CRC_CCITT is not set -CONFIG_CRC16=y +# CONFIG_CRC16 is not set CONFIG_CRC32=y -CONFIG_LIBCRC32C=y -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y +# CONFIG_LIBCRC32C is not set CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y diff --git a/arch/mips/configs/pnx8550-v2pci_defconfig b/arch/mips/configs/pnx8550-v2pci_defconfig deleted file mode 100644 index 3d6c2d74350..00000000000 --- a/arch/mips/configs/pnx8550-v2pci_defconfig +++ /dev/null @@ -1,1540 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.20 -# Tue Feb 20 21:47:39 2007 -# -CONFIG_MIPS=y - -# -# Machine selection -# -CONFIG_ZONE_DMA=y -# CONFIG_MIPS_MTX1 is not set -# CONFIG_MIPS_BOSPORUS is not set -# CONFIG_MIPS_PB1000 is not set -# CONFIG_MIPS_PB1100 is not set -# CONFIG_MIPS_PB1500 is not set -# CONFIG_MIPS_PB1550 is not set -# CONFIG_MIPS_PB1200 is not set -# CONFIG_MIPS_DB1000 is not set -# CONFIG_MIPS_DB1100 is not set -# CONFIG_MIPS_DB1500 is not set -# CONFIG_MIPS_DB1550 is not set -# CONFIG_MIPS_DB1200 is not set -# CONFIG_MIPS_MIRAGE is not set -# CONFIG_BASLER_EXCITE is not set -# CONFIG_MIPS_COBALT is not set -# CONFIG_MACH_DECSTATION is not set -# CONFIG_MIPS_EV64120 is not set -# CONFIG_MACH_JAZZ is not set -# CONFIG_LASAT is not set -# CONFIG_MIPS_ATLAS is not set -# CONFIG_MIPS_MALTA is not set -# CONFIG_MIPS_SEAD is not set -# CONFIG_WR_PPMC is not set -# CONFIG_MIPS_SIM is not set -# CONFIG_MOMENCO_JAGUAR_ATX is not set -# CONFIG_MOMENCO_OCELOT is not set -# CONFIG_MOMENCO_OCELOT_3 is not set -# CONFIG_MOMENCO_OCELOT_C is not set -# CONFIG_MOMENCO_OCELOT_G is not set -# CONFIG_MIPS_XXS1500 is not set -# CONFIG_PNX8550_JBS is not set -# CONFIG_PNX8550_STB810 is not set -# CONFIG_DDB5477 is not set -# CONFIG_MACH_VR41XX is not set -# CONFIG_PMC_YOSEMITE is not set -# CONFIG_QEMU is not set -# CONFIG_MARKEINS is not set -# CONFIG_SGI_IP22 is not set -# CONFIG_SGI_IP27 is not set -# CONFIG_SGI_IP32 is not set -# CONFIG_SIBYTE_BIGSUR is not set -# CONFIG_SIBYTE_SWARM is not set -# CONFIG_SIBYTE_SENTOSA is not set -# CONFIG_SIBYTE_RHONE is not set -# CONFIG_SIBYTE_CARMEL is not set -# CONFIG_SIBYTE_PTSWARM is not set -# CONFIG_SIBYTE_LITTLESUR is not set -# CONFIG_SIBYTE_CRHINE is not set -# CONFIG_SIBYTE_CRHONE is not set -# CONFIG_SNI_RM is not set -# CONFIG_TOSHIBA_JMR3927 is not set -# CONFIG_TOSHIBA_RBTX4927 is not set -# CONFIG_TOSHIBA_RBTX4938 is not set -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_FIND_NEXT_BIT=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_GENERIC_TIME=y -CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_DMA_NONCOHERENT=y -CONFIG_DMA_NEED_PCI_MAP_STATE=y -# CONFIG_CPU_BIG_ENDIAN is not set -CONFIG_CPU_LITTLE_ENDIAN=y -CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y -CONFIG_PNX8550=y -CONFIG_SOC_PNX8550=y -CONFIG_MIPS_L1_CACHE_SHIFT=5 - -# -# CPU selection -# -CONFIG_CPU_MIPS32_R1=y -# CONFIG_CPU_MIPS32_R2 is not set -# CONFIG_CPU_MIPS64_R1 is not set -# CONFIG_CPU_MIPS64_R2 is not set -# CONFIG_CPU_R3000 is not set -# CONFIG_CPU_TX39XX is not set -# CONFIG_CPU_VR41XX is not set -# CONFIG_CPU_R4300 is not set -# CONFIG_CPU_R4X00 is not set -# CONFIG_CPU_TX49XX is not set -# CONFIG_CPU_R5000 is not set -# CONFIG_CPU_R5432 is not set -# CONFIG_CPU_R6000 is not set -# CONFIG_CPU_NEVADA is not set -# CONFIG_CPU_R8000 is not set -# CONFIG_CPU_R10000 is not set -# CONFIG_CPU_RM7000 is not set -# CONFIG_CPU_RM9000 is not set -# CONFIG_CPU_SB1 is not set -CONFIG_SYS_HAS_CPU_MIPS32_R1=y -CONFIG_CPU_MIPS32=y -CONFIG_CPU_MIPSR1=y -CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y -CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y - -# -# Kernel type -# -CONFIG_32BIT=y -# CONFIG_64BIT is not set -CONFIG_PAGE_SIZE_4KB=y -# CONFIG_PAGE_SIZE_8KB is not set -# CONFIG_PAGE_SIZE_16KB is not set -# CONFIG_PAGE_SIZE_64KB is not set -CONFIG_CPU_HAS_PREFETCH=y -CONFIG_MIPS_MT_DISABLED=y -# CONFIG_MIPS_MT_SMP is not set -# CONFIG_MIPS_MT_SMTC is not set -# CONFIG_MIPS_VPE_LOADER is not set -# CONFIG_64BIT_PHYS_ADDR is not set -CONFIG_CPU_HAS_LLSC=y -CONFIG_CPU_HAS_SYNC=y -CONFIG_GENERIC_HARDIRQS=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_CPU_SUPPORTS_HIGHMEM=y -CONFIG_ARCH_FLATMEM_ENABLE=y -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -# CONFIG_HZ_48 is not set -# CONFIG_HZ_100 is not set -# CONFIG_HZ_128 is not set -CONFIG_HZ_250=y -# CONFIG_HZ_256 is not set -# CONFIG_HZ_1000 is not set -# CONFIG_HZ_1024 is not set -CONFIG_SYS_SUPPORTS_ARBIT_HZ=y -CONFIG_HZ=250 -CONFIG_PREEMPT_NONE=y -# CONFIG_PREEMPT_VOLUNTARY is not set -# CONFIG_PREEMPT is not set -# CONFIG_KEXEC is not set -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# Code maturity level options -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_INIT_ENV_ARG_LIMIT=32 - -# -# General setup -# -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -# CONFIG_IPC_NS is not set -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_UTS_NS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_SYSFS_DEPRECATED=y -# CONFIG_RELAY is not set -CONFIG_INITRAMFS_SOURCE="" -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SHMEM=y -CONFIG_SLAB=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -# CONFIG_SLOB is not set - -# -# Loadable module support -# -CONFIG_MODULES=y -# CONFIG_MODULE_UNLOAD is not set -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y - -# -# Block layer -# -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_DEFAULT_AS=y -# CONFIG_DEFAULT_DEADLINE is not set -# CONFIG_DEFAULT_CFQ is not set -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="anticipatory" - -# -# Bus options (PCI, PCMCIA, EISA, ISA, TC) -# -CONFIG_HW_HAS_PCI=y -CONFIG_PCI=y -CONFIG_MMU=y - -# -# PCCARD (PCMCIA/CardBus) support -# -# CONFIG_PCCARD is not set - -# -# PCI Hotplug Support -# -# CONFIG_HOTPLUG_PCI is not set - -# -# Executable file formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_MISC is not set -CONFIG_TRAD_SIGNALS=y - -# -# Power management options -# -CONFIG_PM=y -# CONFIG_PM_LEGACY is not set -# CONFIG_PM_DEBUG is not set -# CONFIG_PM_SYSFS_DEPRECATED is not set - -# -# Networking -# -CONFIG_NET=y - -# -# Networking options -# -# CONFIG_NETDEBUG is not set -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -CONFIG_XFRM=y -# CONFIG_XFRM_USER is not set -# CONFIG_XFRM_SUB_POLICY is not set -CONFIG_XFRM_MIGRATE=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -# CONFIG_IP_PNP_DHCP is not set -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=y -CONFIG_INET_XFRM_MODE_TUNNEL=y -CONFIG_INET_XFRM_MODE_BEET=y -CONFIG_INET_DIAG=y -CONFIG_INET_TCP_DIAG=y -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -CONFIG_TCP_MD5SIG=y - -# -# IP: Virtual Server Configuration -# -# CONFIG_IP_VS is not set -CONFIG_IPV6=m -# CONFIG_IPV6_PRIVACY is not set -CONFIG_IPV6_ROUTER_PREF=y -CONFIG_IPV6_ROUTE_INFO=y -# CONFIG_INET6_AH is not set -# CONFIG_INET6_ESP is not set -# CONFIG_INET6_IPCOMP is not set -# CONFIG_IPV6_MIP6 is not set -# CONFIG_INET6_XFRM_TUNNEL is not set -# CONFIG_INET6_TUNNEL is not set -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set -CONFIG_IPV6_SIT=m -# CONFIG_IPV6_TUNNEL is not set -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set - -# -# Core Netfilter Configuration -# -# CONFIG_NETFILTER_NETLINK is not set -CONFIG_NF_CONNTRACK_ENABLED=m -CONFIG_NF_CONNTRACK_SUPPORT=y -# CONFIG_IP_NF_CONNTRACK_SUPPORT is not set -CONFIG_NF_CONNTRACK=m -CONFIG_NF_CT_ACCT=y -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_EVENTS=y -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -# CONFIG_NF_CONNTRACK_NETBIOS_NS is not set -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NETFILTER_XTABLES=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -# CONFIG_NETFILTER_XT_MATCH_DSCP is not set -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -# CONFIG_NETFILTER_XT_MATCH_POLICY is not set -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -# CONFIG_NETFILTER_XT_MATCH_QUOTA is not set -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -# CONFIG_NETFILTER_XT_MATCH_STATISTIC is not set -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_CONNTRACK_PROC_COMPAT=y -# CONFIG_IP_NF_QUEUE is not set -# CONFIG_IP_NF_IPTABLES is not set -# CONFIG_IP_NF_ARPTABLES is not set - -# -# IPv6: Netfilter Configuration (EXPERIMENTAL) -# -CONFIG_NF_CONNTRACK_IPV6=m -# CONFIG_IP6_NF_QUEUE is not set -# CONFIG_IP6_NF_IPTABLES is not set - -# -# DCCP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_DCCP is not set - -# -# SCTP Configuration (EXPERIMENTAL) -# -# CONFIG_IP_SCTP is not set - -# -# TIPC Configuration (EXPERIMENTAL) -# -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set - -# -# QoS and/or fair queueing -# -# CONFIG_NET_SCHED is not set -CONFIG_NET_CLS_ROUTE=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_IEEE80211 is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_SYS_HYPERVISOR is not set - -# -# Connector - unified userspace <-> kernelspace linker -# -# CONFIG_CONNECTOR is not set - -# -# Memory Technology Devices (MTD) -# -# CONFIG_MTD is not set - -# -# Parallel port support -# -# CONFIG_PARPORT is not set - -# -# Plug and Play support -# -# CONFIG_PNPACPI is not set - -# -# Block devices -# -# CONFIG_BLK_CPQ_DA is not set -# CONFIG_BLK_CPQ_CISS_DA is not set -# CONFIG_BLK_DEV_DAC960 is not set -# CONFIG_BLK_DEV_UMEM is not set -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=y -# CONFIG_BLK_DEV_CRYPTOLOOP is not set -# CONFIG_BLK_DEV_NBD is not set -# CONFIG_BLK_DEV_SX8 is not set -# CONFIG_BLK_DEV_UB is not set -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=8192 -CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 -CONFIG_BLK_DEV_INITRD=y -# CONFIG_CDROM_PKTCDVD is not set -# CONFIG_ATA_OVER_ETH is not set - -# -# Misc devices -# -CONFIG_SGI_IOC4=m -# CONFIG_TIFM_CORE is not set - -# -# ATA/ATAPI/MFM/RLL support -# -CONFIG_IDE=y -CONFIG_IDE_MAX_HWIFS=4 -CONFIG_BLK_DEV_IDE=y - -# -# Please see Documentation/ide.txt for help/info on IDE drives -# -# CONFIG_BLK_DEV_IDE_SATA is not set -CONFIG_BLK_DEV_IDEDISK=y -CONFIG_IDEDISK_MULTI_MODE=y -# CONFIG_BLK_DEV_IDECD is not set -# CONFIG_BLK_DEV_IDETAPE is not set -# CONFIG_BLK_DEV_IDEFLOPPY is not set -# CONFIG_BLK_DEV_IDESCSI is not set -# CONFIG_IDE_TASK_IOCTL is not set - -# -# IDE chipset support/bugfixes -# -CONFIG_IDE_GENERIC=y -CONFIG_BLK_DEV_IDEPCI=y -CONFIG_IDEPCI_SHARE_IRQ=y -# CONFIG_BLK_DEV_OFFBOARD is not set -# CONFIG_BLK_DEV_GENERIC is not set -# CONFIG_BLK_DEV_OPTI621 is not set -CONFIG_BLK_DEV_IDEDMA_PCI=y -# CONFIG_BLK_DEV_IDEDMA_FORCED is not set -CONFIG_IDEDMA_PCI_AUTO=y -# CONFIG_IDEDMA_ONLYDISK is not set -# CONFIG_BLK_DEV_AEC62XX is not set -# CONFIG_BLK_DEV_ALI15X3 is not set -# CONFIG_BLK_DEV_AMD74XX is not set -CONFIG_BLK_DEV_CMD64X=y -# CONFIG_BLK_DEV_TRIFLEX is not set -# CONFIG_BLK_DEV_CY82C693 is not set -# CONFIG_BLK_DEV_CS5520 is not set -# CONFIG_BLK_DEV_CS5530 is not set -# CONFIG_BLK_DEV_HPT34X is not set -# CONFIG_BLK_DEV_HPT366 is not set -# CONFIG_BLK_DEV_JMICRON is not set -# CONFIG_BLK_DEV_SC1200 is not set -# CONFIG_BLK_DEV_PIIX is not set -CONFIG_BLK_DEV_IT8213=m -# CONFIG_BLK_DEV_IT821X is not set -# CONFIG_BLK_DEV_NS87415 is not set -# CONFIG_BLK_DEV_PDC202XX_OLD is not set -# CONFIG_BLK_DEV_PDC202XX_NEW is not set -# CONFIG_BLK_DEV_SVWKS is not set -# CONFIG_BLK_DEV_SIIMAGE is not set -# CONFIG_BLK_DEV_SLC90E66 is not set -# CONFIG_BLK_DEV_TRM290 is not set -# CONFIG_BLK_DEV_VIA82CXXX is not set -CONFIG_BLK_DEV_TC86C001=m -# CONFIG_IDE_ARM is not set -CONFIG_BLK_DEV_IDEDMA=y -# CONFIG_IDEDMA_IVB is not set -CONFIG_IDEDMA_AUTO=y -# CONFIG_BLK_DEV_HD is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -CONFIG_SCSI=y -CONFIG_SCSI_TGT=m -CONFIG_SCSI_NETLINK=y -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -# CONFIG_CHR_DEV_ST is not set -# CONFIG_CHR_DEV_OSST is not set -# CONFIG_BLK_DEV_SR is not set -# CONFIG_CHR_DEV_SG is not set -# CONFIG_CHR_DEV_SCH is not set - -# -# Some SCSI devices (e.g. CD jukebox) support multiple LUNs -# -# CONFIG_SCSI_MULTI_LUN is not set -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -CONFIG_SCSI_SCAN_ASYNC=y - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=m -CONFIG_SCSI_FC_ATTRS=y -CONFIG_SCSI_ISCSI_ATTRS=m -# CONFIG_SCSI_SAS_ATTRS is not set -# CONFIG_SCSI_SAS_LIBSAS is not set - -# -# SCSI low-level drivers -# -CONFIG_ISCSI_TCP=m -# CONFIG_BLK_DEV_3W_XXXX_RAID is not set -# CONFIG_SCSI_3W_9XXX is not set -# CONFIG_SCSI_ACARD is not set -# CONFIG_SCSI_AACRAID is not set -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=32 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -# CONFIG_SCSI_AIC7XXX_OLD is not set -# CONFIG_SCSI_AIC79XX is not set -# CONFIG_SCSI_AIC94XX is not set -# CONFIG_SCSI_DPT_I2O is not set -# CONFIG_SCSI_ARCMSR is not set -# CONFIG_MEGARAID_NEWGEN is not set -# CONFIG_MEGARAID_LEGACY is not set -# CONFIG_MEGARAID_SAS is not set -# CONFIG_SCSI_HPTIOP is not set -# CONFIG_SCSI_DMX3191D is not set -# CONFIG_SCSI_FUTURE_DOMAIN is not set -# CONFIG_SCSI_IPS is not set -# CONFIG_SCSI_INITIO is not set -# CONFIG_SCSI_INIA100 is not set -# CONFIG_SCSI_STEX is not set -# CONFIG_SCSI_SYM53C8XX_2 is not set -# CONFIG_SCSI_QLOGIC_1280 is not set -# CONFIG_SCSI_QLA_FC is not set -# CONFIG_SCSI_QLA_ISCSI is not set -# CONFIG_SCSI_LPFC is not set -# CONFIG_SCSI_DC395x is not set -# CONFIG_SCSI_DC390T is not set -# CONFIG_SCSI_NSP32 is not set -# CONFIG_SCSI_DEBUG is not set -# CONFIG_SCSI_SRP is not set - -# -# Serial ATA (prod) and Parallel ATA (experimental) drivers -# -# CONFIG_ATA is not set - -# -# Multi-device support (RAID and LVM) -# -# CONFIG_MD is not set - -# -# Fusion MPT device support -# -# CONFIG_FUSION is not set -# CONFIG_FUSION_SPI is not set -# CONFIG_FUSION_FC is not set -# CONFIG_FUSION_SAS is not set - -# -# IEEE 1394 (FireWire) support -# -# CONFIG_IEEE1394 is not set - -# -# I2O device support -# -# CONFIG_I2O is not set - -# -# Network device support -# -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_EQUALIZER is not set -CONFIG_TUN=m - -# -# ARCnet devices -# -# CONFIG_ARCNET is not set - -# -# PHY device support -# -# CONFIG_PHYLIB is not set - -# -# Ethernet (10 or 100Mbit) -# -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_HAPPYMEAL is not set -# CONFIG_SUNGEM is not set -# CONFIG_CASSINI is not set -# CONFIG_NET_VENDOR_3COM is not set -# CONFIG_DM9000 is not set - -# -# Tulip family network device support -# -# CONFIG_NET_TULIP is not set -# CONFIG_HP100 is not set -CONFIG_NET_PCI=y -# CONFIG_PCNET32 is not set -# CONFIG_AMD8111_ETH is not set -# CONFIG_ADAPTEC_STARFIRE is not set -# CONFIG_B44 is not set -# CONFIG_FORCEDETH is not set -# CONFIG_DGRS is not set -# CONFIG_EEPRO100 is not set -# CONFIG_E100 is not set -# CONFIG_FEALNX is not set -CONFIG_NATSEMI=y -# CONFIG_NE2K_PCI is not set -# CONFIG_8139CP is not set -CONFIG_8139TOO=y -# CONFIG_8139TOO_PIO is not set -# CONFIG_8139TOO_TUNE_TWISTER is not set -# CONFIG_8139TOO_8129 is not set -# CONFIG_8139_OLD_RX_RESET is not set -# CONFIG_SIS900 is not set -# CONFIG_EPIC100 is not set -# CONFIG_SUNDANCE is not set -# CONFIG_TLAN is not set -# CONFIG_VIA_RHINE is not set -# CONFIG_SC92031 is not set - -# -# Ethernet (1000 Mbit) -# -# CONFIG_ACENIC is not set -# CONFIG_DL2K is not set -# CONFIG_E1000 is not set -# CONFIG_NS83820 is not set -# CONFIG_HAMACHI is not set -# CONFIG_YELLOWFIN is not set -# CONFIG_R8169 is not set -# CONFIG_SIS190 is not set -# CONFIG_SKGE is not set -# CONFIG_SKY2 is not set -# CONFIG_SK98LIN is not set -# CONFIG_VIA_VELOCITY is not set -# CONFIG_TIGON3 is not set -# CONFIG_BNX2 is not set -# CONFIG_QLA3XXX is not set -# CONFIG_ATL1 is not set - -# -# Ethernet (10000 Mbit) -# -# CONFIG_CHELSIO_T1 is not set -CONFIG_CHELSIO_T3=m -# CONFIG_IXGB is not set -# CONFIG_S2IO is not set -# CONFIG_MYRI10GE is not set -CONFIG_NETXEN_NIC=m - -# -# Token Ring devices -# -# CONFIG_TR is not set - -# -# Wireless LAN (non-hamradio) -# -# CONFIG_NET_RADIO is not set - -# -# Wan interfaces -# -# CONFIG_WAN is not set -# CONFIG_FDDI is not set -# CONFIG_HIPPI is not set -CONFIG_PPP=m -# CONFIG_PPP_MULTILINK is not set -# CONFIG_PPP_FILTER is not set -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_PPP_DEFLATE=m -# CONFIG_PPP_BSDCOMP is not set -CONFIG_PPP_MPPE=m -# CONFIG_PPPOE is not set -# CONFIG_SLIP is not set -CONFIG_SLHC=m -# CONFIG_NET_FC is not set -# CONFIG_SHAPER is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set - -# -# ISDN subsystem -# -# CONFIG_ISDN is not set - -# -# Telephony Support -# -# CONFIG_PHONE is not set - -# -# Input device support -# -CONFIG_INPUT=y -# CONFIG_INPUT_FF_MEMLESS is not set - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -# CONFIG_INPUT_JOYDEV is not set -# CONFIG_INPUT_TSDEV is not set -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ATKBD=y -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_LKKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -# CONFIG_KEYBOARD_NEWTON is not set -# CONFIG_KEYBOARD_STOWAWAY is not set -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=y -# CONFIG_MOUSE_SERIAL is not set -# CONFIG_MOUSE_VSXXXAA is not set -# CONFIG_INPUT_JOYSTICK is not set -# CONFIG_INPUT_TOUCHSCREEN is not set -# CONFIG_INPUT_MISC is not set - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=y -# CONFIG_SERIO_PCIPS2 is not set -CONFIG_SERIO_LIBPS2=y -# CONFIG_SERIO_RAW is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -CONFIG_VT=y -# CONFIG_VT_CONSOLE is not set -CONFIG_HW_CONSOLE=y -# CONFIG_VT_HW_CONSOLE_BINDING is not set -CONFIG_SERIAL_NONSTANDARD=y -# CONFIG_COMPUTONE is not set -# CONFIG_ROCKETPORT is not set -# CONFIG_CYCLADES is not set -# CONFIG_DIGIEPCA is not set -# CONFIG_MOXA_INTELLIO is not set -# CONFIG_MOXA_SMARTIO is not set -CONFIG_MOXA_SMARTIO_NEW=m -# CONFIG_ISI is not set -# CONFIG_SYNCLINKMP is not set -# CONFIG_SYNCLINK_GT is not set -# CONFIG_N_HDLC is not set -# CONFIG_RISCOM8 is not set -# CONFIG_SPECIALIX is not set -# CONFIG_SX is not set -# CONFIG_RIO is not set -# CONFIG_STALDRV is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_PNX8XXX=y -CONFIG_SERIAL_PNX8XXX_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -# CONFIG_SERIAL_JSM is not set -CONFIG_UNIX98_PTYS=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=256 - -# -# IPMI -# -# CONFIG_IPMI_HANDLER is not set - -# -# Watchdog Cards -# -# CONFIG_WATCHDOG is not set -CONFIG_HW_RANDOM=y -# CONFIG_RTC is not set -# CONFIG_GEN_RTC is not set -# CONFIG_DTLK is not set -# CONFIG_R3964 is not set -# CONFIG_APPLICOM is not set -# CONFIG_DRM is not set -# CONFIG_RAW_DRIVER is not set - -# -# TPM devices -# -# CONFIG_TCG_TPM is not set - -# -# I2C support -# -CONFIG_I2C=m -CONFIG_I2C_CHARDEV=m - -# -# I2C Algorithms -# -CONFIG_I2C_ALGOBIT=m -# CONFIG_I2C_ALGOPCF is not set -# CONFIG_I2C_ALGOPCA is not set - -# -# I2C Hardware Bus support -# -# CONFIG_I2C_ALI1535 is not set -# CONFIG_I2C_ALI1563 is not set -# CONFIG_I2C_ALI15X3 is not set -# CONFIG_I2C_AMD756 is not set -# CONFIG_I2C_AMD8111 is not set -# CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set -# CONFIG_I2C_PIIX4 is not set -# CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PASEMI is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIS5595 is not set -# CONFIG_I2C_SIS630 is not set -# CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_VIA is not set -# CONFIG_I2C_VIAPRO is not set -# CONFIG_I2C_VOODOO3 is not set -# CONFIG_I2C_PCA_ISA is not set - -# -# Miscellaneous I2C Chip support -# -# CONFIG_SENSORS_DS1337 is not set -# CONFIG_SENSORS_DS1374 is not set -# CONFIG_SENSORS_EEPROM is not set -# CONFIG_SENSORS_PCF8574 is not set -# CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set -# CONFIG_SENSORS_MAX6875 is not set -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_I2C_DEBUG_CHIP is not set - -# -# SPI support -# -# CONFIG_SPI is not set -# CONFIG_SPI_MASTER is not set - -# -# Dallas's 1-wire bus -# -# CONFIG_W1 is not set - -# -# Hardware Monitoring support -# -CONFIG_HWMON=y -# CONFIG_HWMON_VID is not set -# CONFIG_SENSORS_ABITUGURU is not set -# CONFIG_SENSORS_ADM1021 is not set -# CONFIG_SENSORS_ADM1025 is not set -# CONFIG_SENSORS_ADM1026 is not set -# CONFIG_SENSORS_ADM1029 is not set -# CONFIG_SENSORS_ADM1031 is not set -# CONFIG_SENSORS_ADM9240 is not set -# CONFIG_SENSORS_ASB100 is not set -# CONFIG_SENSORS_ATXP1 is not set -# CONFIG_SENSORS_DS1621 is not set -# CONFIG_SENSORS_F71805F is not set -# CONFIG_SENSORS_FSCHER is not set -# CONFIG_SENSORS_FSCPOS is not set -# CONFIG_SENSORS_GL518SM is not set -# CONFIG_SENSORS_GL520SM is not set -# CONFIG_SENSORS_IT87 is not set -# CONFIG_SENSORS_LM63 is not set -# CONFIG_SENSORS_LM75 is not set -# CONFIG_SENSORS_LM77 is not set -# CONFIG_SENSORS_LM78 is not set -# CONFIG_SENSORS_LM80 is not set -# CONFIG_SENSORS_LM83 is not set -# CONFIG_SENSORS_LM85 is not set -# CONFIG_SENSORS_LM87 is not set -# CONFIG_SENSORS_LM90 is not set -# CONFIG_SENSORS_LM92 is not set -# CONFIG_SENSORS_MAX1619 is not set -# CONFIG_SENSORS_PC87360 is not set -# CONFIG_SENSORS_PC87427 is not set -# CONFIG_SENSORS_SIS5595 is not set -# CONFIG_SENSORS_SMSC47M1 is not set -# CONFIG_SENSORS_SMSC47M192 is not set -# CONFIG_SENSORS_SMSC47B397 is not set -# CONFIG_SENSORS_VIA686A is not set -# CONFIG_SENSORS_VT1211 is not set -# CONFIG_SENSORS_VT8231 is not set -# CONFIG_SENSORS_W83781D is not set -# CONFIG_SENSORS_W83791D is not set -# CONFIG_SENSORS_W83792D is not set -# CONFIG_SENSORS_W83793 is not set -# CONFIG_SENSORS_W83L785TS is not set -# CONFIG_SENSORS_W83627HF is not set -# CONFIG_SENSORS_W83627EHF is not set -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Multimedia devices -# -# CONFIG_VIDEO_DEV is not set - -# -# Digital Video Broadcasting Devices -# -# CONFIG_DVB is not set -# CONFIG_USB_DABUSB is not set - -# -# Graphics support -# -CONFIG_FIRMWARE_EDID=y -CONFIG_FB=y -# CONFIG_FB_DDC is not set -# CONFIG_FB_CFB_FILLRECT is not set -# CONFIG_FB_CFB_COPYAREA is not set -# CONFIG_FB_CFB_IMAGEBLIT is not set -# CONFIG_FB_SVGALIB is not set -# CONFIG_FB_MACMODES is not set -# CONFIG_FB_BACKLIGHT is not set -# CONFIG_FB_MODE_HELPERS is not set -# CONFIG_FB_TILEBLITTING is not set -# CONFIG_FB_CIRRUS is not set -# CONFIG_FB_PM2 is not set -# CONFIG_FB_CYBER2000 is not set -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -# CONFIG_FB_S1D13XXX is not set -# CONFIG_FB_NVIDIA is not set -# CONFIG_FB_RIVA is not set -# CONFIG_FB_MATROX is not set -# CONFIG_FB_RADEON is not set -# CONFIG_FB_ATY128 is not set -# CONFIG_FB_ATY is not set -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -# CONFIG_FB_SIS is not set -# CONFIG_FB_NEOMAGIC is not set -# CONFIG_FB_KYRO is not set -# CONFIG_FB_3DFX is not set -# CONFIG_FB_VOODOO1 is not set -# CONFIG_FB_SMIVGX is not set -# CONFIG_FB_TRIDENT is not set -# CONFIG_FB_VIRTUAL is not set - -# -# Console display driver support -# -# CONFIG_VGA_CONSOLE is not set -CONFIG_DUMMY_CONSOLE=y -# CONFIG_FRAMEBUFFER_CONSOLE is not set - -# -# Logo configuration -# -# CONFIG_LOGO is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Sound -# -# CONFIG_SOUND is not set - -# -# HID Devices -# -CONFIG_HID=y -# CONFIG_HID_DEBUG is not set - -# -# USB support -# -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB_ARCH_HAS_OHCI=y -CONFIG_USB_ARCH_HAS_EHCI=y -CONFIG_USB=y -# CONFIG_USB_DEBUG is not set - -# -# Miscellaneous USB options -# -CONFIG_USB_DEVICEFS=y -# CONFIG_USB_DYNAMIC_MINORS is not set -# CONFIG_USB_SUSPEND is not set -# CONFIG_USB_OTG is not set - -# -# USB Host Controller Drivers -# -# CONFIG_USB_EHCI_HCD is not set -# CONFIG_USB_ISP116X_HCD is not set -# CONFIG_USB_OHCI_HCD is not set -# CONFIG_USB_UHCI_HCD is not set -# CONFIG_USB_SL811_HCD is not set - -# -# USB Device Class drivers -# -# CONFIG_USB_ACM is not set -# CONFIG_USB_PRINTER is not set - -# -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' -# - -# -# may also be needed; see USB_STORAGE Help for more information -# -CONFIG_USB_STORAGE=y -# CONFIG_USB_STORAGE_DEBUG is not set -# CONFIG_USB_STORAGE_DATAFAB is not set -# CONFIG_USB_STORAGE_FREECOM is not set -# CONFIG_USB_STORAGE_ISD200 is not set -# CONFIG_USB_STORAGE_DPCM is not set -# CONFIG_USB_STORAGE_USBAT is not set -# CONFIG_USB_STORAGE_SDDR09 is not set -# CONFIG_USB_STORAGE_SDDR55 is not set -# CONFIG_USB_STORAGE_JUMPSHOT is not set -# CONFIG_USB_STORAGE_ALAUDA is not set -# CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_LIBUSUAL is not set - -# -# USB Input Devices -# -CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set -CONFIG_USB_HIDDEV=y -# CONFIG_USB_AIPTEK is not set -# CONFIG_USB_WACOM is not set -# CONFIG_USB_ACECAD is not set -# CONFIG_USB_KBTAB is not set -# CONFIG_USB_POWERMATE is not set -# CONFIG_USB_TOUCHSCREEN is not set -# CONFIG_USB_YEALINK is not set -# CONFIG_USB_XPAD is not set -# CONFIG_USB_ATI_REMOTE is not set -# CONFIG_USB_ATI_REMOTE2 is not set -# CONFIG_USB_KEYSPAN_REMOTE is not set -# CONFIG_USB_APPLETOUCH is not set -# CONFIG_USB_GTCO is not set - -# -# USB Imaging devices -# -# CONFIG_USB_MDC800 is not set -# CONFIG_USB_MICROTEK is not set - -# -# USB Network Adapters -# -# CONFIG_USB_CATC is not set -# CONFIG_USB_KAWETH is not set -# CONFIG_USB_PEGASUS is not set -# CONFIG_USB_RTL8150 is not set -# CONFIG_USB_USBNET_MII is not set -# CONFIG_USB_USBNET is not set -CONFIG_USB_MON=y - -# -# USB port drivers -# - -# -# USB Serial Converter support -# -# CONFIG_USB_SERIAL is not set - -# -# USB Miscellaneous drivers -# -# CONFIG_USB_EMI62 is not set -# CONFIG_USB_EMI26 is not set -# CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set -# CONFIG_USB_RIO500 is not set -# CONFIG_USB_LEGOTOWER is not set -# CONFIG_USB_LCD is not set -# CONFIG_USB_BERRY_CHARGE is not set -# CONFIG_USB_LED is not set -# CONFIG_USB_CYPRESS_CY7C63 is not set -# CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set -# CONFIG_USB_IDMOUSE is not set -# CONFIG_USB_FTDI_ELAN is not set -# CONFIG_USB_APPLEDISPLAY is not set -# CONFIG_USB_LD is not set -# CONFIG_USB_TRANCEVIBRATOR is not set -# CONFIG_USB_TEST is not set - -# -# USB DSL modem support -# - -# -# USB Gadget Support -# -# CONFIG_USB_GADGET is not set - -# -# MMC/SD Card support -# -# CONFIG_MMC is not set - -# -# LED devices -# -# CONFIG_NEW_LEDS is not set - -# -# LED drivers -# - -# -# LED Triggers -# - -# -# InfiniBand support -# -# CONFIG_INFINIBAND is not set - -# -# EDAC - error detection and reporting (RAS) (EXPERIMENTAL) -# - -# -# Real Time Clock -# -# CONFIG_RTC_CLASS is not set - -# -# DMA Engine support -# -# CONFIG_DMA_ENGINE is not set - -# -# DMA Clients -# - -# -# DMA Devices -# - -# -# Auxiliary Display support -# - -# -# Virtualization -# - -# -# File systems -# -CONFIG_EXT2_FS=y -# CONFIG_EXT2_FS_XATTR is not set -# CONFIG_EXT2_FS_XIP is not set -CONFIG_EXT3_FS=y -CONFIG_EXT3_FS_XATTR=y -# CONFIG_EXT3_FS_POSIX_ACL is not set -# CONFIG_EXT3_FS_SECURITY is not set -# CONFIG_EXT4DEV_FS is not set -CONFIG_JBD=y -# CONFIG_JBD_DEBUG is not set -CONFIG_FS_MBCACHE=y -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -CONFIG_XFS_FS=m -# CONFIG_XFS_QUOTA is not set -# CONFIG_XFS_SECURITY is not set -# CONFIG_XFS_POSIX_ACL is not set -# CONFIG_XFS_RT is not set -# CONFIG_GFS2_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_ROMFS_FS is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -CONFIG_DNOTIFY=y -CONFIG_AUTOFS_FS=y -CONFIG_AUTOFS4_FS=y -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=y -CONFIG_MSDOS_FS=y -CONFIG_VFAT_FS=y -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -# CONFIG_PROC_KCORE is not set -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_RAMFS=y -CONFIG_CONFIGFS_FS=m - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_CRAMFS=y -# CONFIG_VXFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set - -# -# Network File Systems -# -CONFIG_NFS_FS=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -# CONFIG_NFS_V4 is not set -# CONFIG_NFS_DIRECTIO is not set -CONFIG_NFSD=m -# CONFIG_NFSD_V3 is not set -# CONFIG_NFSD_TCP is not set -CONFIG_ROOT_NFS=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_EXPORTFS=m -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -CONFIG_SMB_FS=m -# CONFIG_SMB_NLS_DEFAULT is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set -# CONFIG_9P_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y - -# -# Native Language Support -# -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="iso8859-1" -# CONFIG_NLS_CODEPAGE_437 is not set -# CONFIG_NLS_CODEPAGE_737 is not set -# CONFIG_NLS_CODEPAGE_775 is not set -# CONFIG_NLS_CODEPAGE_850 is not set -# CONFIG_NLS_CODEPAGE_852 is not set -# CONFIG_NLS_CODEPAGE_855 is not set -# CONFIG_NLS_CODEPAGE_857 is not set -# CONFIG_NLS_CODEPAGE_860 is not set -# CONFIG_NLS_CODEPAGE_861 is not set -# CONFIG_NLS_CODEPAGE_862 is not set -# CONFIG_NLS_CODEPAGE_863 is not set -# CONFIG_NLS_CODEPAGE_864 is not set -# CONFIG_NLS_CODEPAGE_865 is not set -# CONFIG_NLS_CODEPAGE_866 is not set -# CONFIG_NLS_CODEPAGE_869 is not set -# CONFIG_NLS_CODEPAGE_936 is not set -# CONFIG_NLS_CODEPAGE_950 is not set -# CONFIG_NLS_CODEPAGE_932 is not set -# CONFIG_NLS_CODEPAGE_949 is not set -# CONFIG_NLS_CODEPAGE_874 is not set -# CONFIG_NLS_ISO8859_8 is not set -# CONFIG_NLS_CODEPAGE_1250 is not set -# CONFIG_NLS_CODEPAGE_1251 is not set -# CONFIG_NLS_ASCII is not set -# CONFIG_NLS_ISO8859_1 is not set -# CONFIG_NLS_ISO8859_2 is not set -# CONFIG_NLS_ISO8859_3 is not set -# CONFIG_NLS_ISO8859_4 is not set -# CONFIG_NLS_ISO8859_5 is not set -# CONFIG_NLS_ISO8859_6 is not set -# CONFIG_NLS_ISO8859_7 is not set -# CONFIG_NLS_ISO8859_9 is not set -# CONFIG_NLS_ISO8859_13 is not set -# CONFIG_NLS_ISO8859_14 is not set -# CONFIG_NLS_ISO8859_15 is not set -# CONFIG_NLS_KOI8_R is not set -# CONFIG_NLS_KOI8_U is not set -# CONFIG_NLS_UTF8 is not set - -# -# Distributed Lock Manager -# -CONFIG_DLM=m -CONFIG_DLM_TCP=y -# CONFIG_DLM_SCTP is not set -# CONFIG_DLM_DEBUG is not set - -# -# Profiling support -# -# CONFIG_PROFILING is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -# CONFIG_PRINTK_TIME is not set -CONFIG_ENABLE_MUST_CHECK=y -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -CONFIG_LOG_BUF_SHIFT=14 -CONFIG_CROSSCOMPILE=y -CONFIG_CMDLINE="" -CONFIG_SYS_SUPPORTS_KGDB=y - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set - -# -# Cryptographic options -# -CONFIG_CRYPTO=y -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_BLKCIPHER=m -CONFIG_CRYPTO_HASH=m -CONFIG_CRYPTO_MANAGER=m -# CONFIG_CRYPTO_HMAC is not set -CONFIG_CRYPTO_XCBC=m -# CONFIG_CRYPTO_NULL is not set -# CONFIG_CRYPTO_MD4 is not set -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_SHA1=m -# CONFIG_CRYPTO_SHA256 is not set -# CONFIG_CRYPTO_SHA512 is not set -# CONFIG_CRYPTO_WP512 is not set -# CONFIG_CRYPTO_TGR192 is not set -CONFIG_CRYPTO_GF128MUL=m -CONFIG_CRYPTO_ECB=m -CONFIG_CRYPTO_CBC=m -CONFIG_CRYPTO_PCBC=m -CONFIG_CRYPTO_LRW=m -# CONFIG_CRYPTO_DES is not set -CONFIG_CRYPTO_FCRYPT=m -# CONFIG_CRYPTO_BLOWFISH is not set -# CONFIG_CRYPTO_TWOFISH is not set -# CONFIG_CRYPTO_SERPENT is not set -# CONFIG_CRYPTO_AES is not set -# CONFIG_CRYPTO_CAST5 is not set -# CONFIG_CRYPTO_CAST6 is not set -# CONFIG_CRYPTO_TEA is not set -CONFIG_CRYPTO_ARC4=m -# CONFIG_CRYPTO_KHAZAD is not set -# CONFIG_CRYPTO_ANUBIS is not set -# CONFIG_CRYPTO_DEFLATE is not set -# CONFIG_CRYPTO_MICHAEL_MIC is not set -CONFIG_CRYPTO_CRC32C=m -CONFIG_CRYPTO_CAMELLIA=m -# CONFIG_CRYPTO_TEST is not set - -# -# Hardware crypto devices -# - -# -# Library routines -# -CONFIG_BITREVERSE=y -CONFIG_CRC_CCITT=m -# CONFIG_CRC16 is not set -CONFIG_CRC32=y -CONFIG_LIBCRC32C=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=m -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y diff --git a/arch/mips/gt64120/wrppmc/pci.c b/arch/mips/gt64120/wrppmc/pci.c index 2fbe93467f7..0d5289bc180 100644 --- a/arch/mips/gt64120/wrppmc/pci.c +++ b/arch/mips/gt64120/wrppmc/pci.c @@ -13,7 +13,7 @@ #include <linux/kernel.h> #include <asm/gt64120.h> -extern struct pci_ops gt64120_pci_ops; +extern struct pci_ops gt64xxx_pci0_ops; static struct resource pci0_io_resource = { .name = "pci_0 io", @@ -30,7 +30,7 @@ static struct resource pci0_mem_resource = { }; static struct pci_controller hose_0 = { - .pci_ops = >64120_pci_ops, + .pci_ops = >64xxx_pci0_ops, .io_resource = &pci0_io_resource, .mem_resource = &pci0_mem_resource, }; diff --git a/arch/mips/jmr3927/common/prom.c b/arch/mips/jmr3927/common/prom.c index aa481b774c4..5398813e50e 100644 --- a/arch/mips/jmr3927/common/prom.c +++ b/arch/mips/jmr3927/common/prom.c @@ -41,16 +41,6 @@ #include <asm/bootinfo.h> -extern int prom_argc; -extern char **prom_argv, **prom_envp; - -typedef struct -{ - char *name; -/* char *val; */ -}t_env_var; - - char * __init prom_getcmdline(void) { return &(arcs_cmdline[0]); @@ -60,6 +50,8 @@ void __init prom_init_cmdline(void) { char *cp; int actr; + int prom_argc = fw_arg0; + char **prom_argv = (char **) fw_arg1; actr = 1; /* Always ignore argv[0] */ diff --git a/arch/mips/jmr3927/common/puts.c b/arch/mips/jmr3927/common/puts.c index 1c1cad9cd07..c611ab49788 100644 --- a/arch/mips/jmr3927/common/puts.c +++ b/arch/mips/jmr3927/common/puts.c @@ -32,137 +32,29 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/types.h> -#include <asm/jmr3927/txx927.h> #include <asm/jmr3927/tx3927.h> -#include <asm/jmr3927/jmr3927.h> #define TIMEOUT 0xffffff -#define SLOW_DOWN - -static const char digits[16] = "0123456789abcdef"; - -#ifdef SLOW_DOWN -#define slow_down() { int k; for (k=0; k<10000; k++); } -#else -#define slow_down() -#endif void -putch(const unsigned char c) +prom_putchar(char c) { int i = 0; do { - slow_down(); i++; - if (i>TIMEOUT) { + if (i>TIMEOUT) break; - } } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS)); tx3927_sioptr(1)->tfifo = c; return; } -unsigned char getch(void) -{ - int i = 0; - int dicr; - char c; - - /* diable RX int. */ - dicr = tx3927_sioptr(1)->dicr; - tx3927_sioptr(1)->dicr = 0; - - do { - slow_down(); - i++; - if (i>TIMEOUT) { - break; - } - } while (tx3927_sioptr(1)->disr & TXx927_SIDISR_UVALID) - ; - c = tx3927_sioptr(1)->rfifo; - - /* clear RX int. status */ - tx3927_sioptr(1)->disr &= ~TXx927_SIDISR_RDIS; - /* enable RX int. */ - tx3927_sioptr(1)->dicr = dicr; - - return c; -} -void -do_jmr3927_led_set(char n) -{ - /* and with current leds */ - jmr3927_led_and_set(n); -} - void -puts(unsigned char *cp) +puts(const char *cp) { - int i = 0; - - while (*cp) { - do { - slow_down(); - i++; - if (i>TIMEOUT) { - break; - } - } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS)); - tx3927_sioptr(1)->tfifo = *cp++; - } - putch('\r'); - putch('\n'); -} - -void -fputs(unsigned char *cp) -{ - int i = 0; - - while (*cp) { - do { - slow_down(); - i++; - if (i>TIMEOUT) { - break; - } - } while (!(tx3927_sioptr(1)->cisr & TXx927_SICISR_TXALS)); - tx3927_sioptr(1)->tfifo = *cp++; - } -} - - -void -put64(uint64_t ul) -{ - int cnt; - unsigned ch; - - cnt = 16; /* 16 nibbles in a 64 bit long */ - putch('0'); - putch('x'); - do { - cnt--; - ch = (unsigned char)(ul >> cnt * 4) & 0x0F; - putch(digits[ch]); - } while (cnt > 0); -} - -void -put32(unsigned u) -{ - int cnt; - unsigned ch; - - cnt = 8; /* 8 nibbles in a 32 bit long */ - putch('0'); - putch('x'); - do { - cnt--; - ch = (unsigned char)(u >> cnt * 4) & 0x0F; - putch(digits[ch]); - } while (cnt > 0); + while (*cp) + prom_putchar(*cp++); + prom_putchar('\r'); + prom_putchar('\n'); } diff --git a/arch/mips/jmr3927/rbhma3100/Makefile b/arch/mips/jmr3927/rbhma3100/Makefile index 18fe9a898cb..8d00ba460ce 100644 --- a/arch/mips/jmr3927/rbhma3100/Makefile +++ b/arch/mips/jmr3927/rbhma3100/Makefile @@ -3,5 +3,4 @@ # obj-y += init.o irq.o setup.o -obj-$(CONFIG_RUNTIME_DEBUG) += debug.o obj-$(CONFIG_KGDB) += kgdb_io.o diff --git a/arch/mips/jmr3927/rbhma3100/init.c b/arch/mips/jmr3927/rbhma3100/init.c index a55cb4572de..9169fab1773 100644 --- a/arch/mips/jmr3927/rbhma3100/init.c +++ b/arch/mips/jmr3927/rbhma3100/init.c @@ -28,20 +28,10 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/init.h> -#include <linux/mm.h> -#include <linux/sched.h> -#include <linux/bootmem.h> - -#include <asm/addrspace.h> #include <asm/bootinfo.h> -#include <asm/mipsregs.h> #include <asm/jmr3927/jmr3927.h> -int prom_argc; -char **prom_argv, **prom_envp; extern void __init prom_init_cmdline(void); -extern char *prom_getenv(char *envname); -unsigned long mips_nofpu = 0; const char *get_system_type(void) { @@ -52,7 +42,7 @@ const char *get_system_type(void) ; } -extern void puts(unsigned char *cp); +extern void puts(const char *cp); void __init prom_init(void) { @@ -61,10 +51,6 @@ void __init prom_init(void) if ((tx3927_ccfgptr->ccfg & TX3927_CCFG_TLBOFF) == 0) puts("Warning: TX3927 TLB off\n"); #endif - prom_argc = fw_arg0; - prom_argv = (char **) fw_arg1; - prom_envp = (char **) fw_arg2; - mips_machgroup = MACH_GROUP_TOSHIBA; #ifdef CONFIG_TOSHIBA_JMR3927 diff --git a/arch/mips/jmr3927/rbhma3100/irq.c b/arch/mips/jmr3927/rbhma3100/irq.c index 7d2c203cb40..1187b44a3dd 100644 --- a/arch/mips/jmr3927/rbhma3100/irq.c +++ b/arch/mips/jmr3927/rbhma3100/irq.c @@ -30,53 +30,21 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ #include <linux/init.h> - -#include <linux/errno.h> -#include <linux/irq.h> -#include <linux/kernel_stat.h> -#include <linux/signal.h> #include <linux/sched.h> #include <linux/types.h> #include <linux/interrupt.h> -#include <linux/ioport.h> -#include <linux/timex.h> -#include <linux/slab.h> -#include <linux/random.h> -#include <linux/smp.h> -#include <linux/smp_lock.h> -#include <linux/bitops.h> -#include <asm/irq_regs.h> #include <asm/io.h> #include <asm/mipsregs.h> #include <asm/system.h> -#include <asm/ptrace.h> #include <asm/processor.h> -#include <asm/jmr3927/irq.h> -#include <asm/debug.h> #include <asm/jmr3927/jmr3927.h> #if JMR3927_IRQ_END > NR_IRQS #error JMR3927_IRQ_END > NR_IRQS #endif -struct tb_irq_space* tb_irq_spaces; - -static int jmr3927_irq_base = -1; - -#ifdef CONFIG_PCI -static int jmr3927_gen_iack(void) -{ - /* generate ACK cycle */ -#ifdef __BIG_ENDIAN - return (tx3927_pcicptr->iiadp >> 24) & 0xff; -#else - return tx3927_pcicptr->iiadp & 0xff; -#endif -} -#endif - #define irc_dlevel 0 #define irc_elevel 1 @@ -87,89 +55,24 @@ static unsigned char irc_level[TX3927_NUM_IR] = { 6, 6, 6 /* TMR */ }; -static void jmr3927_irq_disable(unsigned int irq_nr); -static void jmr3927_irq_enable(unsigned int irq_nr); - -static void jmr3927_irq_ack(unsigned int irq) -{ - if (irq == JMR3927_IRQ_IRC_TMR0) - jmr3927_tmrptr->tisr = 0; /* ack interrupt */ - - jmr3927_irq_disable(irq); -} - -static void jmr3927_irq_end(unsigned int irq) -{ - if (!(irq_desc[irq].status & (IRQ_DISABLED | IRQ_INPROGRESS))) - jmr3927_irq_enable(irq); -} - -static void jmr3927_irq_disable(unsigned int irq_nr) -{ - struct tb_irq_space* sp; - - for (sp = tb_irq_spaces; sp; sp = sp->next) { - if (sp->start_irqno <= irq_nr && - irq_nr < sp->start_irqno + sp->nr_irqs) { - if (sp->mask_func) - sp->mask_func(irq_nr - sp->start_irqno, - sp->space_id); - break; - } - } -} - -static void jmr3927_irq_enable(unsigned int irq_nr) -{ - struct tb_irq_space* sp; - - for (sp = tb_irq_spaces; sp; sp = sp->next) { - if (sp->start_irqno <= irq_nr && - irq_nr < sp->start_irqno + sp->nr_irqs) { - if (sp->unmask_func) - sp->unmask_func(irq_nr - sp->start_irqno, - sp->space_id); - break; - } - } -} - /* * CP0_STATUS is a thread's resource (saved/restored on context switch). - * So disable_irq/enable_irq MUST handle IOC/ISAC/IRC registers. + * So disable_irq/enable_irq MUST handle IOC/IRC registers. */ -static void mask_irq_isac(int irq_nr, int space_id) -{ - /* 0: mask */ - unsigned char imask = - jmr3927_isac_reg_in(JMR3927_ISAC_INTM_ADDR); - unsigned int bit = 1 << irq_nr; - jmr3927_isac_reg_out(imask & ~bit, JMR3927_ISAC_INTM_ADDR); - /* flush write buffer */ - (void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR); -} -static void unmask_irq_isac(int irq_nr, int space_id) -{ - /* 0: mask */ - unsigned char imask = jmr3927_isac_reg_in(JMR3927_ISAC_INTM_ADDR); - unsigned int bit = 1 << irq_nr; - jmr3927_isac_reg_out(imask | bit, JMR3927_ISAC_INTM_ADDR); - /* flush write buffer */ - (void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR); -} - -static void mask_irq_ioc(int irq_nr, int space_id) +static void mask_irq_ioc(unsigned int irq) { /* 0: mask */ + unsigned int irq_nr = irq - JMR3927_IRQ_IOC; unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR); unsigned int bit = 1 << irq_nr; jmr3927_ioc_reg_out(imask & ~bit, JMR3927_IOC_INTM_ADDR); /* flush write buffer */ (void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR); } -static void unmask_irq_ioc(int irq_nr, int space_id) +static void unmask_irq_ioc(unsigned int irq) { /* 0: mask */ + unsigned int irq_nr = irq - JMR3927_IRQ_IOC; unsigned char imask = jmr3927_ioc_reg_in(JMR3927_IOC_INTM_ADDR); unsigned int bit = 1 << irq_nr; jmr3927_ioc_reg_out(imask | bit, JMR3927_IOC_INTM_ADDR); @@ -177,8 +80,9 @@ static void unmask_irq_ioc(int irq_nr, int space_id) (void)jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR); } -static void mask_irq_irc(int irq_nr, int space_id) +static void mask_irq_irc(unsigned int irq) { + unsigned int irq_nr = irq - JMR3927_IRQ_IRC; volatile unsigned long *ilrp = &tx3927_ircptr->ilr[irq_nr / 2]; if (irq_nr & 1) *ilrp = (*ilrp & 0x00ff) | (irc_dlevel << 8); @@ -191,8 +95,9 @@ static void mask_irq_irc(int irq_nr, int space_id) (void)tx3927_ircptr->ssr; } -static void unmask_irq_irc(int irq_nr, int space_id) +static void unmask_irq_irc(unsigned int irq) { + unsigned int irq_nr = irq - JMR3927_IRQ_IRC; volatile unsigned long *ilrp = &tx3927_ircptr->ilr[irq_nr / 2]; if (irq_nr & 1) *ilrp = (*ilrp & 0x00ff) | (irc_level[irq_nr] << 8); @@ -203,98 +108,14 @@ static void unmask_irq_irc(int irq_nr, int space_id) tx3927_ircptr->imr = irc_elevel; } -struct tb_irq_space jmr3927_isac_irqspace = { - .next = NULL, - .start_irqno = JMR3927_IRQ_ISAC, - nr_irqs : JMR3927_NR_IRQ_ISAC, - .mask_func = mask_irq_isac, - .unmask_func = unmask_irq_isac, - .name = "ISAC", - .space_id = 0, - can_share : 0 -}; -struct tb_irq_space jmr3927_ioc_irqspace = { - .next = NULL, - .start_irqno = JMR3927_IRQ_IOC, - nr_irqs : JMR3927_NR_IRQ_IOC, - .mask_func = mask_irq_ioc, - .unmask_func = unmask_irq_ioc, - .name = "IOC", - .space_id = 0, - can_share : 1 -}; - -struct tb_irq_space jmr3927_irc_irqspace = { - .next = NULL, - .start_irqno = JMR3927_IRQ_IRC, - .nr_irqs = JMR3927_NR_IRQ_IRC, - .mask_func = mask_irq_irc, - .unmask_func = unmask_irq_irc, - .name = "on-chip", - .space_id = 0, - .can_share = 0 -}; - - -#ifdef CONFIG_TX_BRANCH_LIKELY_BUG_WORKAROUND -static int tx_branch_likely_bug_count = 0; -static int have_tx_branch_likely_bug = 0; - -static void tx_branch_likely_bug_fixup(void) -{ - struct pt_regs *regs = get_irq_regs(); - - /* TX39/49-BUG: Under this condition, the insn in delay slot - of the branch likely insn is executed (not nullified) even - the branch condition is false. */ - if (!have_tx_branch_likely_bug) - return; - if ((regs->cp0_epc & 0xfff) == 0xffc && - KSEGX(regs->cp0_epc) != KSEG0 && - KSEGX(regs->cp0_epc) != KSEG1) { - unsigned int insn = *(unsigned int*)(regs->cp0_epc - 4); - /* beql,bnel,blezl,bgtzl */ - /* bltzl,bgezl,blezall,bgezall */ - /* bczfl, bcztl */ - if ((insn & 0xf0000000) == 0x50000000 || - (insn & 0xfc0e0000) == 0x04020000 || - (insn & 0xf3fe0000) == 0x41020000) { - regs->cp0_epc -= 4; - tx_branch_likely_bug_count++; - printk(KERN_INFO - "fix branch-likery bug in %s (insn %08x)\n", - current->comm, insn); - } - } -} -#endif - -static void jmr3927_spurious(void) -{ - struct pt_regs * regs = get_irq_regs(); - -#ifdef CONFIG_TX_BRANCH_LIKELY_BUG_WORKAROUND - tx_branch_likely_bug_fixup(); -#endif - printk(KERN_WARNING "spurious interrupt (cause 0x%lx, pc 0x%lx, ra 0x%lx).\n", - regs->cp0_cause, regs->cp0_epc, regs->regs[31]); -} - asmlinkage void plat_irq_dispatch(void) { - struct pt_regs * regs = get_irq_regs(); + unsigned long cp0_cause = read_c0_cause(); int irq; -#ifdef CONFIG_TX_BRANCH_LIKELY_BUG_WORKAROUND - tx_branch_likely_bug_fixup(); -#endif - if ((regs->cp0_cause & CAUSEF_IP7) == 0) { -#if 0 - jmr3927_spurious(); -#endif + if ((cp0_cause & CAUSEF_IP7) == 0) return; - } - irq = (regs->cp0_cause >> CAUSEB_IP2) & 0x0f; + irq = (cp0_cause >> CAUSEB_IP2) & 0x0f; do_IRQ(irq + JMR3927_IRQ_IRC); } @@ -317,35 +138,6 @@ static struct irqaction ioc_action = { jmr3927_ioc_interrupt, 0, CPU_MASK_NONE, "IOC", NULL, NULL, }; -static irqreturn_t jmr3927_isac_interrupt(int irq, void *dev_id) -{ - unsigned char istat = jmr3927_isac_reg_in(JMR3927_ISAC_INTS2_ADDR); - int i; - - for (i = 0; i < JMR3927_NR_IRQ_ISAC; i++) { - if (istat & (1 << i)) { - irq = JMR3927_IRQ_ISAC + i; - do_IRQ(irq); - } - } - return IRQ_HANDLED; -} - -static struct irqaction isac_action = { - jmr3927_isac_interrupt, 0, CPU_MASK_NONE, "ISAC", NULL, NULL, -}; - - -static irqreturn_t jmr3927_isaerr_interrupt(int irq, void *dev_id) -{ - printk(KERN_WARNING "ISA error interrupt (irq 0x%x).\n", irq); - - return IRQ_HANDLED; -} -static struct irqaction isaerr_action = { - jmr3927_isaerr_interrupt, 0, CPU_MASK_NONE, "ISA error", NULL, NULL, -}; - static irqreturn_t jmr3927_pcierr_interrupt(int irq, void *dev_id) { printk(KERN_WARNING "PCI error interrupt (irq 0x%x).\n", irq); @@ -358,54 +150,19 @@ static struct irqaction pcierr_action = { jmr3927_pcierr_interrupt, 0, CPU_MASK_NONE, "PCI error", NULL, NULL, }; -int jmr3927_ether1_irq = 0; - -void jmr3927_irq_init(u32 irq_base); +static void __init jmr3927_irq_init(void); void __init arch_init_irq(void) { - /* look for io board's presence */ - int have_isac = jmr3927_have_isac(); - /* Now, interrupt control disabled, */ /* all IRC interrupts are masked, */ /* all IRC interrupt mode are Low Active. */ - if (have_isac) { - - /* ETHER1 (NE2000 compatible 10M-Ether) parameter setup */ - /* temporary enable interrupt control */ - tx3927_ircptr->cer = 1; - /* ETHER1 Int. Is High-Active. */ - if (tx3927_ircptr->ssr & (1 << 0)) - jmr3927_ether1_irq = JMR3927_IRQ_IRC_INT0; -#if 0 /* INT3 may be asserted by ether0 (even after reboot...) */ - else if (tx3927_ircptr->ssr & (1 << 3)) - jmr3927_ether1_irq = JMR3927_IRQ_IRC_INT3; -#endif - /* disable interrupt control */ - tx3927_ircptr->cer = 0; - - /* Ether1: High Active */ - if (jmr3927_ether1_irq) { - int ether1_irc = jmr3927_ether1_irq - JMR3927_IRQ_IRC; - tx3927_ircptr->cr[ether1_irc / 8] |= - TX3927_IRCR_HIGH << ((ether1_irc % 8) * 2); - } - } - /* mask all IOC interrupts */ jmr3927_ioc_reg_out(0, JMR3927_IOC_INTM_ADDR); /* setup IOC interrupt mode (SOFT:High Active, Others:Low Active) */ jmr3927_ioc_reg_out(JMR3927_IOC_INTF_SOFT, JMR3927_IOC_INTP_ADDR); - if (have_isac) { - /* mask all ISAC interrupts */ - jmr3927_isac_reg_out(0, JMR3927_ISAC_INTM_ADDR); - /* setup ISAC interrupt mode (ISAIRQ3,ISAIRQ5:Low Active ???) */ - jmr3927_isac_reg_out(JMR3927_ISAC_INTF_IRQ3|JMR3927_ISAC_INTF_IRQ5, JMR3927_ISAC_INTP_ADDR); - } - /* clear PCI Soft interrupts */ jmr3927_ioc_reg_out(0, JMR3927_IOC_INTS1_ADDR); /* clear PCI Reset interrupts */ @@ -415,21 +172,11 @@ void __init arch_init_irq(void) tx3927_ircptr->cer = TX3927_IRCER_ICE; tx3927_ircptr->imr = irc_elevel; - jmr3927_irq_init(NR_ISA_IRQS); - - /* setup irq space */ - add_tb_irq_space(&jmr3927_isac_irqspace); - add_tb_irq_space(&jmr3927_ioc_irqspace); - add_tb_irq_space(&jmr3927_irc_irqspace); + jmr3927_irq_init(); /* setup IOC interrupt 1 (PCI, MODEM) */ setup_irq(JMR3927_IRQ_IOCINT, &ioc_action); - if (have_isac) { - setup_irq(JMR3927_IRQ_ISACINT, &isac_action); - setup_irq(JMR3927_IRQ_ISAC_ISAER, &isaerr_action); - } - #ifdef CONFIG_PCI setup_irq(JMR3927_IRQ_IRC_PCI, &pcierr_action); #endif @@ -438,21 +185,28 @@ void __init arch_init_irq(void) set_c0_status(ST0_IM); /* IE bit is still 0. */ } -static struct irq_chip jmr3927_irq_controller = { - .name = "jmr3927_irq", - .ack = jmr3927_irq_ack, - .mask = jmr3927_irq_disable, - .mask_ack = jmr3927_irq_ack, - .unmask = jmr3927_irq_enable, - .end = jmr3927_irq_end, +static struct irq_chip jmr3927_irq_ioc = { + .name = "jmr3927_ioc", + .ack = mask_irq_ioc, + .mask = mask_irq_ioc, + .mask_ack = mask_irq_ioc, + .unmask = unmask_irq_ioc, }; -void jmr3927_irq_init(u32 irq_base) +static struct irq_chip jmr3927_irq_irc = { + .name = "jmr3927_irc", + .ack = mask_irq_irc, + .mask = mask_irq_irc, + .mask_ack = mask_irq_irc, + .unmask = unmask_irq_irc, +}; + +static void __init jmr3927_irq_init(void) { u32 i; - for (i= irq_base; i< irq_base + JMR3927_NR_IRQ_IRC + JMR3927_NR_IRQ_IOC; i++) - set_irq_chip(i, &jmr3927_irq_controller); - - jmr3927_irq_base = irq_base; + for (i = JMR3927_IRQ_IRC; i < JMR3927_IRQ_IRC + JMR3927_NR_IRQ_IRC; i++) + set_irq_chip_and_handler(i, &jmr3927_irq_irc, handle_level_irq); + for (i = JMR3927_IRQ_IOC; i < JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC; i++) + set_irq_chip_and_handler(i, &jmr3927_irq_ioc, handle_level_irq); } diff --git a/arch/mips/jmr3927/rbhma3100/kgdb_io.c b/arch/mips/jmr3927/rbhma3100/kgdb_io.c index 269a42deae0..2604f2c9a96 100644 --- a/arch/mips/jmr3927/rbhma3100/kgdb_io.c +++ b/arch/mips/jmr3927/rbhma3100/kgdb_io.c @@ -31,23 +31,12 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/types.h> -#include <asm/jmr3927/txx927.h> -#include <asm/jmr3927/tx3927.h> #include <asm/jmr3927/jmr3927.h> #define TIMEOUT 0xffffff -#define SLOW_DOWN - -static const char digits[16] = "0123456789abcdef"; - -#ifdef SLOW_DOWN -#define slow_down() { int k; for (k=0; k<10000; k++); } -#else -#define slow_down() -#endif static int remoteDebugInitialized = 0; +static void debugInit(int baud) int putDebugChar(unsigned char c) { @@ -103,20 +92,8 @@ unsigned char getDebugChar(void) return c; } -void debugInit(int baud) +static void debugInit(int baud) { - /* - volatile unsigned long lcr; - volatile unsigned long dicr; - volatile unsigned long disr; - volatile unsigned long cisr; - volatile unsigned long fcr; - volatile unsigned long flcr; - volatile unsigned long bgr; - volatile unsigned long tfifo; - volatile unsigned long rfifo; - */ - tx3927_sioptr(0)->lcr = 0x020; tx3927_sioptr(0)->dicr = 0; tx3927_sioptr(0)->disr = 0x4100; @@ -125,31 +102,4 @@ void debugInit(int baud) tx3927_sioptr(0)->flcr = 0x02; tx3927_sioptr(0)->bgr = ((JMR3927_BASE_BAUD + baud / 2) / baud) | TXx927_SIBGR_BCLK_T0; -#if 0 - /* - * Reset the UART. - */ - tx3927_sioptr(0)->fcr = TXx927_SIFCR_SWRST; - while (tx3927_sioptr(0)->fcr & TXx927_SIFCR_SWRST) - ; - - /* - * and set the speed of the serial port - * (currently hardwired to 9600 8N1 - */ - - tx3927_sioptr(0)->lcr = TXx927_SILCR_UMODE_8BIT | - TXx927_SILCR_USBL_1BIT | - TXx927_SILCR_SCS_IMCLK_BG; - tx3927_sioptr(0)->bgr = - ((JMR3927_BASE_BAUD + baud / 2) / baud) | - TXx927_SIBGR_BCLK_T0; - - /* HW RTS/CTS control */ - if (ser->flags & ASYNC_HAVE_CTS_LINE) - tx3927_sioptr(0)->flcr = TXx927_SIFLCR_RCS | TXx927_SIFLCR_TES | - TXx927_SIFLCR_RTSTL_MAX /* 15 */; - /* Enable RX/TX */ - tx3927_sioptr(0)->flcr &= ~(TXx927_SIFLCR_RSDE | TXx927_SIFLCR_TSDE); -#endif } diff --git a/arch/mips/jmr3927/rbhma3100/setup.c b/arch/mips/jmr3927/rbhma3100/setup.c index fc523bda068..d1ef2895d56 100644 --- a/arch/mips/jmr3927/rbhma3100/setup.c +++ b/arch/mips/jmr3927/rbhma3100/setup.c @@ -54,87 +54,18 @@ #include <asm/addrspace.h> #include <asm/time.h> -#include <asm/bcache.h> -#include <asm/irq.h> #include <asm/reboot.h> -#include <asm/gdb-stub.h> #include <asm/jmr3927/jmr3927.h> #include <asm/mipsregs.h> -#include <asm/traps.h> -extern void puts(unsigned char *cp); +extern void puts(const char *cp); /* Tick Timer divider */ #define JMR3927_TIMER_CCD 0 /* 1/2 */ #define JMR3927_TIMER_CLK (JMR3927_IMCLK / (2 << JMR3927_TIMER_CCD)) -unsigned char led_state = 0xf; - -struct { - struct resource ram0; - struct resource ram1; - struct resource pcimem; - struct resource iob; - struct resource ioc; - struct resource pciio; - struct resource jmy1394; - struct resource rom1; - struct resource rom0; - struct resource sio0; - struct resource sio1; -} jmr3927_resources = { - { - .start = 0, - .end = 0x01FFFFFF, - .name = "RAM0", - .flags = IORESOURCE_MEM - }, { - .start = 0x02000000, - .end = 0x03FFFFFF, - .name = "RAM1", - .flags = IORESOURCE_MEM - }, { - .start = 0x08000000, - .end = 0x07FFFFFF, - .name = "PCIMEM", - .flags = IORESOURCE_MEM - }, { - .start = 0x10000000, - .end = 0x13FFFFFF, - .name = "IOB" - }, { - .start = 0x14000000, - .end = 0x14FFFFFF, - .name = "IOC" - }, { - .start = 0x15000000, - .end = 0x15FFFFFF, - .name = "PCIIO" - }, { - .start = 0x1D000000, - .end = 0x1D3FFFFF, - .name = "JMY1394" - }, { - .start = 0x1E000000, - .end = 0x1E3FFFFF, - .name = "ROM1" - }, { - .start = 0x1FC00000, - .end = 0x1FFFFFFF, - .name = "ROM0" - }, { - .start = 0xFFFEF300, - .end = 0xFFFEF3FF, - .name = "SIO0" - }, { - .start = 0xFFFEF400, - .end = 0xFFFEF4FF, - .name = "SIO1" - }, -}; - /* don't enable - see errata */ -int jmr3927_ccfg_toeon = 0; +static int jmr3927_ccfg_toeon; static inline void do_reset(void) { @@ -173,9 +104,15 @@ static cycle_t jmr3927_hpt_read(void) return jiffies * (JMR3927_TIMER_CLK / HZ) + jmr3927_tmrptr->trr; } +static void jmr3927_timer_ack(void) +{ + jmr3927_tmrptr->tisr = 0; /* ack interrupt */ +} + static void __init jmr3927_time_init(void) { clocksource_mips.read = jmr3927_hpt_read; + mips_timer_ack = jmr3927_timer_ack; mips_hpt_frequency = JMR3927_TIMER_CLK; } @@ -190,9 +127,6 @@ void __init plat_timer_setup(struct irqaction *irq) setup_irq(JMR3927_IRQ_TICK, irq); } -#define USECS_PER_JIFFY (1000000/HZ) - -//#undef DO_WRITE_THROUGH #define DO_WRITE_THROUGH #define DO_ENABLE_CACHE @@ -224,12 +158,6 @@ void __init plat_mem_setup(void) /* Reboot on panic */ panic_timeout = 180; - { - unsigned int conf; - conf = read_c0_conf(); - } - -#if 1 /* cache setup */ { unsigned int conf; @@ -256,16 +184,14 @@ void __init plat_mem_setup(void) write_c0_conf(conf); write_c0_cache(0); } -#endif /* initialize board */ jmr3927_board_init(); argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "toeon")) != NULL) { - jmr3927_ccfg_toeon = 1; - } + if ((argptr = strstr(argptr, "toeon")) != NULL) + jmr3927_ccfg_toeon = 1; argptr = prom_getcmdline(); if ((argptr = strstr(argptr, "ip=")) == NULL) { argptr = prom_getcmdline(); @@ -281,7 +207,7 @@ void __init plat_mem_setup(void) memset(&req, 0, sizeof(req)); req.line = i; req.iotype = UPIO_MEM; - req.membase = (char *)TX3927_SIO_REG(i); + req.membase = (unsigned char __iomem *)TX3927_SIO_REG(i); req.mapbase = TX3927_SIO_REG(i); req.irq = i == 0 ? JMR3927_IRQ_IRC_SIO0 : JMR3927_IRQ_IRC_SIO1; @@ -303,65 +229,33 @@ void __init plat_mem_setup(void) static void tx3927_setup(void); -#ifdef CONFIG_PCI -unsigned long mips_pci_io_base; -unsigned long mips_pci_io_size; -unsigned long mips_pci_mem_base; -unsigned long mips_pci_mem_size; -/* for legacy I/O, PCI I/O PCI Bus address must be 0 */ -unsigned long mips_pci_io_pciaddr = 0; -#endif - static void __init jmr3927_board_init(void) { - char *argptr; - -#ifdef CONFIG_PCI - mips_pci_io_base = JMR3927_PCIIO; - mips_pci_io_size = JMR3927_PCIIO_SIZE; - mips_pci_mem_base = JMR3927_PCIMEM; - mips_pci_mem_size = JMR3927_PCIMEM_SIZE; -#endif - tx3927_setup(); - if (jmr3927_have_isac()) { - -#ifdef CONFIG_FB_E1355 - argptr = prom_getcmdline(); - if ((argptr = strstr(argptr, "video=")) == NULL) { - argptr = prom_getcmdline(); - strcat(argptr, " video=e1355fb:crt16h"); - } -#endif - -#ifdef CONFIG_BLK_DEV_IDE - /* overrides PCI-IDE */ -#endif - } - /* SIO0 DTR on */ jmr3927_ioc_reg_out(0, JMR3927_IOC_DTR_ADDR); jmr3927_led_set(0); - - if (jmr3927_have_isac()) - jmr3927_io_led_set(0); printk("JMR-TX3927 (Rev %d) --- IOC(Rev %d) DIPSW:%d,%d,%d,%d\n", jmr3927_ioc_reg_in(JMR3927_IOC_BREV_ADDR) & JMR3927_REV_MASK, jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_REV_MASK, jmr3927_dipsw1(), jmr3927_dipsw2(), jmr3927_dipsw3(), jmr3927_dipsw4()); - if (jmr3927_have_isac()) - printk("JMI-3927IO2 --- ISAC(Rev %d) DIPSW:%01x\n", - jmr3927_isac_reg_in(JMR3927_ISAC_REV_ADDR) & JMR3927_REV_MASK, - jmr3927_io_dipsw()); } -void __init tx3927_setup(void) +static void __init tx3927_setup(void) { int i; +#ifdef CONFIG_PCI + unsigned long mips_pci_io_base = JMR3927_PCIIO; + unsigned long mips_pci_io_size = JMR3927_PCIIO_SIZE; + unsigned long mips_pci_mem_base = JMR3927_PCIMEM; + unsigned long mips_pci_mem_size = JMR3927_PCIMEM_SIZE; + /* for legacy I/O, PCI I/O PCI Bus address must be 0 */ + unsigned long mips_pci_io_pciaddr = 0; +#endif /* SDRAMC are configured by PROM */ @@ -475,10 +369,8 @@ void __init tx3927_setup(void) tx3927_pcicptr->mbas = ~(mips_pci_mem_size - 1); tx3927_pcicptr->mba = 0; tx3927_pcicptr->tlbmma = 0; -#ifndef JMR3927_INIT_INDIRECT_PCI /* Enable Direct mapping Address Space Decoder */ tx3927_pcicptr->lbc |= TX3927_PCIC_LBC_ILMDE | TX3927_PCIC_LBC_ILIDE; -#endif /* Clear All Local Bus Status */ tx3927_pcicptr->lbstat = TX3927_PCIC_LBIM_ALL; @@ -491,22 +383,15 @@ void __init tx3927_setup(void) /* PCIC Int => IRC IRQ10 */ tx3927_pcicptr->il = TX3927_IR_PCI; -#if 1 /* Target Control (per errata) */ tx3927_pcicptr->tc = TX3927_PCIC_TC_OF8E | TX3927_PCIC_TC_IF8E; -#endif /* Enable Bus Arbiter */ -#if 0 - tx3927_pcicptr->req_trace = 0x73737373; -#endif tx3927_pcicptr->pbapmc = TX3927_PCIC_PBAPMC_PBAEN; tx3927_pcicptr->pcicmd = PCI_COMMAND_MASTER | PCI_COMMAND_MEMORY | -#if 1 PCI_COMMAND_IO | -#endif PCI_COMMAND_PARITY | PCI_COMMAND_SERR; } #endif /* CONFIG_PCI */ @@ -555,8 +440,6 @@ static int __init jmr3927_rtc_init(void) .flags = IORESOURCE_MEM, }; struct platform_device *dev; - if (!jmr3927_have_nvram()) - return -ENODEV; dev = platform_device_register_simple("ds1742", -1, &res, 1); return IS_ERR(dev) ? PTR_ERR(dev) : 0; } diff --git a/arch/mips/kernel/asm-offsets.c b/arch/mips/kernel/asm-offsets.c index 222de465db7..761a779d5c4 100644 --- a/arch/mips/kernel/asm-offsets.c +++ b/arch/mips/kernel/asm-offsets.c @@ -102,7 +102,6 @@ void output_thread_info_defines(void) offset("#define TI_ADDR_LIMIT ", struct thread_info, addr_limit); offset("#define TI_RESTART_BLOCK ", struct thread_info, restart_block); offset("#define TI_REGS ", struct thread_info, regs); - constant("#define _THREAD_SIZE_ORDER ", THREAD_SIZE_ORDER); constant("#define _THREAD_SIZE ", THREAD_SIZE); constant("#define _THREAD_MASK ", THREAD_MASK); linefeed; diff --git a/arch/mips/kernel/i8259.c b/arch/mips/kernel/i8259.c index 9c79703979b..2345160e63f 100644 --- a/arch/mips/kernel/i8259.c +++ b/arch/mips/kernel/i8259.c @@ -328,8 +328,8 @@ void __init init_i8259_irqs (void) { int i; - request_resource(&ioport_resource, &pic1_io_resource); - request_resource(&ioport_resource, &pic2_io_resource); + insert_resource(&ioport_resource, &pic1_io_resource); + insert_resource(&ioport_resource, &pic2_io_resource); init_8259A(0); diff --git a/arch/mips/kernel/kspd.c b/arch/mips/kernel/kspd.c index 29eadd404fa..c6580018c94 100644 --- a/arch/mips/kernel/kspd.c +++ b/arch/mips/kernel/kspd.c @@ -17,6 +17,7 @@ */ #include <linux/kernel.h> #include <linux/module.h> +#include <linux/sched.h> #include <linux/unistd.h> #include <linux/file.h> #include <linux/fs.h> @@ -198,7 +199,6 @@ void sp_work_handle_request(void) int cmd; char *vcwd; - mm_segment_t old_fs; int size; ret.retval = -1; @@ -241,8 +241,6 @@ void sp_work_handle_request(void) if ((ret.retval = sp_syscall(__NR_gettimeofday, (int)&tv, (int)&tz, 0,0)) == 0) ret.retval = tv.tv_sec; - - ret.errno = errno; break; case MTSP_SYSCALL_EXIT: @@ -279,7 +277,6 @@ void sp_work_handle_request(void) if (cmd >= 0) { ret.retval = sp_syscall(cmd, generic.arg0, generic.arg1, generic.arg2, generic.arg3); - ret.errno = errno; } else printk(KERN_WARNING "KSPD: Unknown SP syscall number %d\n", sc.cmd); diff --git a/arch/mips/kernel/rtlx.c b/arch/mips/kernel/rtlx.c index e6e3047151a..bfc8ca168f8 100644 --- a/arch/mips/kernel/rtlx.c +++ b/arch/mips/kernel/rtlx.c @@ -289,7 +289,7 @@ unsigned int rtlx_write_poll(int index) return write_spacefree(chan->rt_read, chan->rt_write, chan->buffer_size); } -ssize_t rtlx_read(int index, void __user *buff, size_t count, int user) +ssize_t rtlx_read(int index, void __user *buff, size_t count) { size_t lx_write, fl = 0L; struct rtlx_channel *lx; @@ -331,9 +331,10 @@ out: return count; } -ssize_t rtlx_write(int index, const void __user *buffer, size_t count, int user) +ssize_t rtlx_write(int index, const void __user *buffer, size_t count) { struct rtlx_channel *rt; + unsigned long failed; size_t rt_read; size_t fl; @@ -363,7 +364,7 @@ ssize_t rtlx_write(int index, const void __user *buffer, size_t count, int user) } out: - count -= cailed; + count -= failed; smp_wmb(); rt->rt_write = (rt->rt_write + count) % rt->buffer_size; diff --git a/arch/mips/mips-boards/generic/display.c b/arch/mips/mips-boards/generic/display.c index f653946afc2..548dbe5ce7c 100644 --- a/arch/mips/mips-boards/generic/display.c +++ b/arch/mips/mips-boards/generic/display.c @@ -24,16 +24,16 @@ void mips_display_message(const char *str) { - static volatile unsigned int *display = NULL; + static unsigned int __iomem *display = NULL; int i; if (unlikely(display == NULL)) - display = (volatile unsigned int *)ioremap(ASCII_DISPLAY_POS_BASE, 16*sizeof(int)); + display = ioremap(ASCII_DISPLAY_POS_BASE, 16*sizeof(int)); for (i = 0; i <= 14; i=i+2) { if (*str) - display[i] = *str++; + writel(*str++, display + i); else - display[i] = ' '; + writel(' ', display + i); } } diff --git a/arch/mips/mips-boards/generic/pci.c b/arch/mips/mips-boards/generic/pci.c index 3192a14698c..f98d60f7865 100644 --- a/arch/mips/mips-boards/generic/pci.c +++ b/arch/mips/mips-boards/generic/pci.c @@ -65,7 +65,7 @@ static struct resource msc_io_resource = { }; extern struct pci_ops bonito64_pci_ops; -extern struct pci_ops gt64120_pci_ops; +extern struct pci_ops gt64xxx_pci0_ops; extern struct pci_ops msc_pci_ops; static struct pci_controller bonito64_controller = { @@ -76,7 +76,7 @@ static struct pci_controller bonito64_controller = { }; static struct pci_controller gt64120_controller = { - .pci_ops = >64120_pci_ops, + .pci_ops = >64xxx_pci0_ops, .io_resource = >64120_io_resource, .mem_resource = >64120_mem_resource, }; diff --git a/arch/mips/mips-boards/generic/reset.c b/arch/mips/mips-boards/generic/reset.c index 0996ba368b2..7a1bb51f81e 100644 --- a/arch/mips/mips-boards/generic/reset.c +++ b/arch/mips/mips-boards/generic/reset.c @@ -39,24 +39,24 @@ static void atlas_machine_power_off(void); static void mips_machine_restart(char *command) { - volatile unsigned int *softres_reg = (unsigned int *)ioremap (SOFTRES_REG, sizeof(unsigned int)); + unsigned int __iomem *softres_reg = ioremap(SOFTRES_REG, sizeof(unsigned int)); - *softres_reg = GORESET; + writew(GORESET, softres_reg); } static void mips_machine_halt(void) { - volatile unsigned int *softres_reg = (unsigned int *)ioremap (SOFTRES_REG, sizeof(unsigned int)); + unsigned int __iomem *softres_reg = ioremap(SOFTRES_REG, sizeof(unsigned int)); - *softres_reg = GORESET; + writew(GORESET, softres_reg); } #if defined(CONFIG_MIPS_ATLAS) static void atlas_machine_power_off(void) { - volatile unsigned int *psustby_reg = (unsigned int *)ioremap(ATLAS_PSUSTBY_REG, sizeof(unsigned int)); + unsigned int __iomem *psustby_reg = ioremap(ATLAS_PSUSTBY_REG, sizeof(unsigned int)); - *psustby_reg = ATLAS_GOSTBY; + writew(ATLAS_GOSTBY, psustby_reg); } #endif diff --git a/arch/mips/mips-boards/malta/malta_int.c b/arch/mips/mips-boards/malta/malta_int.c index 3c206bb1716..83d76025d61 100644 --- a/arch/mips/mips-boards/malta/malta_int.c +++ b/arch/mips/mips-boards/malta/malta_int.c @@ -42,8 +42,6 @@ #include <asm/mips-boards/msc01_pci.h> #include <asm/msc01_ic.h> -extern void mips_timer_interrupt(void); - static DEFINE_SPINLOCK(mips_irq_lock); static inline int mips_pcibios_iack(void) @@ -85,7 +83,7 @@ static inline int mips_pcibios_iack(void) dummy = BONITO_PCIMAP_CFG; iob(); /* sync */ - irq = *(volatile u32 *)(_pcictrl_bonito_pcicfg); + irq = readl((u32 *)_pcictrl_bonito_pcicfg); iob(); /* sync */ irq &= 0xff; BONITO_PCIMAP_CFG = 0; diff --git a/arch/mips/mips-boards/malta/malta_setup.c b/arch/mips/mips-boards/malta/malta_setup.c index 56ea76679cd..7873932532a 100644 --- a/arch/mips/mips-boards/malta/malta_setup.c +++ b/arch/mips/mips-boards/malta/malta_setup.c @@ -145,7 +145,8 @@ void __init plat_mem_setup(void) #ifdef CONFIG_BLK_DEV_IDE /* Check PCI clock */ { - int jmpr = (*((volatile unsigned int *)ioremap(MALTA_JMPRS_REG, sizeof(unsigned int))) >> 2) & 0x07; + unsigned int __iomem *jmpr_p = (unsigned int *) ioremap(MALTA_JMPRS_REG, sizeof(unsigned int)); + int jmpr = (readw(jmpr_p) >> 2) & 0x07; static const int pciclocks[] __initdata = { 33, 20, 25, 30, 12, 16, 37, 10 }; @@ -179,7 +180,6 @@ void __init plat_mem_setup(void) }; #endif #endif - mips_reboot_setup(); board_time_init = mips_time_init; diff --git a/arch/mips/mm/cache.c b/arch/mips/mm/cache.c index 4e8f1b68337..abf99b1eba1 100644 --- a/arch/mips/mm/cache.c +++ b/arch/mips/mm/cache.c @@ -96,7 +96,7 @@ void __flush_anon_page(struct page *page, unsigned long vmaddr) kaddr = kmap_coherent(page, vmaddr); flush_data_cache_page((unsigned long)kaddr); - kunmap_coherent(kaddr); + kunmap_coherent(); } } diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c index e9951c0e689..2d1c2c02482 100644 --- a/arch/mips/mm/init.c +++ b/arch/mips/mm/init.c @@ -177,7 +177,7 @@ void *kmap_coherent(struct page *page, unsigned long addr) #define UNIQUE_ENTRYHI(idx) (CKSEG0 + ((idx) << (PAGE_SHIFT + 1))) -void kunmap_coherent(struct page *page) +void kunmap_coherent(void) { #ifndef CONFIG_MIPS_MT_SMTC unsigned int wired; @@ -210,7 +210,7 @@ void copy_user_highpage(struct page *to, struct page *from, if (cpu_has_dc_aliases) { vfrom = kmap_coherent(from, vaddr); copy_page(vto, vfrom); - kunmap_coherent(from); + kunmap_coherent(); } else { vfrom = kmap_atomic(from, KM_USER0); copy_page(vto, vfrom); @@ -233,7 +233,7 @@ void copy_to_user_page(struct vm_area_struct *vma, if (cpu_has_dc_aliases) { void *vto = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); memcpy(vto, src, len); - kunmap_coherent(page); + kunmap_coherent(); } else memcpy(dst, src, len); if ((vma->vm_flags & VM_EXEC) && !cpu_has_ic_fills_f_dc) @@ -250,7 +250,7 @@ void copy_from_user_page(struct vm_area_struct *vma, void *vfrom = kmap_coherent(page, vaddr) + (vaddr & ~PAGE_MASK); memcpy(dst, vfrom, len); - kunmap_coherent(page); + kunmap_coherent(); } else memcpy(dst, src, len); } @@ -351,18 +351,15 @@ void __init paging_init(void) #endif kmap_coherent_init(); -#ifdef CONFIG_ISA - if (max_low_pfn >= MAX_DMA_PFN) - if (min_low_pfn >= MAX_DMA_PFN) { - zones_size[ZONE_DMA] = 0; - zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn; - } else { - zones_size[ZONE_DMA] = MAX_DMA_PFN - min_low_pfn; - zones_size[ZONE_NORMAL] = max_low_pfn - MAX_DMA_PFN; - } +#ifdef CONFIG_ZONE_DMA + if (min_low_pfn < MAX_DMA_PFN && MAX_DMA_PFN <= max_low_pfn) { + zones_size[ZONE_DMA] = MAX_DMA_PFN - min_low_pfn; + zones_size[ZONE_NORMAL] = max_low_pfn - MAX_DMA_PFN; + } else if (max_low_pfn < MAX_DMA_PFN) + zones_size[ZONE_DMA] = max_low_pfn - min_low_pfn; else #endif - zones_size[ZONE_DMA] = max_low_pfn - min_low_pfn; + zones_size[ZONE_NORMAL] = max_low_pfn - min_low_pfn; #ifdef CONFIG_HIGHMEM zones_size[ZONE_HIGHMEM] = highend_pfn - highstart_pfn; diff --git a/arch/mips/pci/Makefile b/arch/mips/pci/Makefile index bf85995ca04..df487c063b1 100644 --- a/arch/mips/pci/Makefile +++ b/arch/mips/pci/Makefile @@ -8,8 +8,7 @@ obj-y += pci.o pci-dac.o # PCI bus host bridge specific code # obj-$(CONFIG_MIPS_BONITO64) += ops-bonito64.o -obj-$(CONFIG_MIPS_GT64111) += ops-gt64111.o -obj-$(CONFIG_MIPS_GT64120) += ops-gt64120.o +obj-$(CONFIG_PCI_GT64XXX_PCI0) += ops-gt64xxx_pci0.o obj-$(CONFIG_PCI_MARVELL) += ops-marvell.o obj-$(CONFIG_MIPS_MSC) += ops-msc.o obj-$(CONFIG_MIPS_NILE4) += ops-nile4.o diff --git a/arch/mips/pci/fixup-jmr3927.c b/arch/mips/pci/fixup-jmr3927.c index 6e72d213f4c..73d18503517 100644 --- a/arch/mips/pci/fixup-jmr3927.c +++ b/arch/mips/pci/fixup-jmr3927.c @@ -29,7 +29,6 @@ */ #include <linux/types.h> #include <linux/pci.h> -#include <linux/kernel.h> #include <linux/init.h> #include <asm/jmr3927/jmr3927.h> @@ -81,14 +80,8 @@ int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin) /* Check OnBoard Ethernet (IDSEL=A24, DevNu=13) */ if (dev->bus->parent == NULL && - slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(24)) { - extern int jmr3927_ether1_irq; - /* check this irq line was reserved for ether1 */ - if (jmr3927_ether1_irq != JMR3927_IRQ_ETHER0) - irq = JMR3927_IRQ_ETHER0; - else - irq = 0; /* disable */ - } + slot == TX3927_PCIC_IDSEL_AD_TO_SLOT(24)) + irq = JMR3927_IRQ_ETHER0; return irq; } diff --git a/arch/mips/pci/ops-gt64111.c b/arch/mips/pci/ops-gt64111.c deleted file mode 100644 index ecd3991bd0e..00000000000 --- a/arch/mips/pci/ops-gt64111.c +++ /dev/null @@ -1,100 +0,0 @@ -/* - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 1995, 1996, 1997, 2002 by Ralf Baechle - * Copyright (C) 2001, 2002, 2003 by Liam Davies (ldavies@agile.tv) - */ -#include <linux/types.h> -#include <linux/pci.h> -#include <linux/kernel.h> -#include <linux/init.h> - -#include <asm/pci.h> -#include <asm/io.h> -#include <asm/gt64120.h> - -#include <asm/mach-cobalt/cobalt.h> - -/* - * Device 31 on the GT64111 is used to generate PCI special - * cycles, so we shouldn't expected to find a device there ... - */ -static inline int pci_range_ck(struct pci_bus *bus, unsigned int devfn) -{ - if (bus->number == 0 && PCI_SLOT(devfn) < 31) - return 0; - - return -1; -} - -static int gt64111_pci_read_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 * val) -{ - if (pci_range_ck(bus, devfn)) - return PCIBIOS_DEVICE_NOT_FOUND; - - switch (size) { - case 4: - PCI_CFG_SET(devfn, where); - *val = GT_READ(GT_PCI0_CFGDATA_OFS); - return PCIBIOS_SUCCESSFUL; - - case 2: - PCI_CFG_SET(devfn, (where & ~0x3)); - *val = GT_READ(GT_PCI0_CFGDATA_OFS) - >> ((where & 3) * 8); - return PCIBIOS_SUCCESSFUL; - - case 1: - PCI_CFG_SET(devfn, (where & ~0x3)); - *val = GT_READ(GT_PCI0_CFGDATA_OFS) - >> ((where & 3) * 8); - return PCIBIOS_SUCCESSFUL; - } - - return PCIBIOS_BAD_REGISTER_NUMBER; -} - -static int gt64111_pci_write_config(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) -{ - u32 tmp; - - if (pci_range_ck(bus, devfn)) - return PCIBIOS_DEVICE_NOT_FOUND; - - switch (size) { - case 4: - PCI_CFG_SET(devfn, where); - GT_WRITE(GT_PCI0_CFGDATA_OFS, val); - - return PCIBIOS_SUCCESSFUL; - - case 2: - PCI_CFG_SET(devfn, (where & ~0x3)); - tmp = GT_READ(GT_PCI0_CFGDATA_OFS); - tmp &= ~(0xffff << ((where & 0x3) * 8)); - tmp |= (val << ((where & 0x3) * 8)); - GT_WRITE(GT_PCI0_CFGDATA_OFS, tmp); - - return PCIBIOS_SUCCESSFUL; - - case 1: - PCI_CFG_SET(devfn, (where & ~0x3)); - tmp = GT_READ(GT_PCI0_CFGDATA_OFS); - tmp &= ~(0xff << ((where & 0x3) * 8)); - tmp |= (val << ((where & 0x3) * 8)); - GT_WRITE(GT_PCI0_CFGDATA_OFS, tmp); - - return PCIBIOS_SUCCESSFUL; - } - - return PCIBIOS_BAD_REGISTER_NUMBER; -} - -struct pci_ops gt64111_pci_ops = { - .read = gt64111_pci_read_config, - .write = gt64111_pci_write_config, -}; diff --git a/arch/mips/pci/ops-gt64120.c b/arch/mips/pci/ops-gt64xxx_pci0.c index 6335844d607..3d896c5f413 100644 --- a/arch/mips/pci/ops-gt64120.c +++ b/arch/mips/pci/ops-gt64xxx_pci0.c @@ -39,8 +39,8 @@ #define PCI_CFG_TYPE1_DEV_SHF 11 #define PCI_CFG_TYPE1_BUS_SHF 16 -static int gt64120_pcibios_config_access(unsigned char access_type, - struct pci_bus *bus, unsigned int devfn, int where, u32 * data) +static int gt64xxx_pci0_pcibios_config_access(unsigned char access_type, + struct pci_bus *bus, unsigned int devfn, int where, u32 * data) { unsigned char busnum = bus->number; u32 intr; @@ -100,13 +100,13 @@ static int gt64120_pcibios_config_access(unsigned char access_type, * We can't address 8 and 16 bit words directly. Instead we have to * read/write a 32bit word and mask/modify the data we actually want. */ -static int gt64120_pcibios_read(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 * val) +static int gt64xxx_pci0_pcibios_read(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 * val) { u32 data = 0; - if (gt64120_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, where, - &data)) + if (gt64xxx_pci0_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, + where, &data)) return PCIBIOS_DEVICE_NOT_FOUND; if (size == 1) @@ -119,16 +119,16 @@ static int gt64120_pcibios_read(struct pci_bus *bus, unsigned int devfn, return PCIBIOS_SUCCESSFUL; } -static int gt64120_pcibios_write(struct pci_bus *bus, unsigned int devfn, - int where, int size, u32 val) +static int gt64xxx_pci0_pcibios_write(struct pci_bus *bus, unsigned int devfn, + int where, int size, u32 val) { u32 data = 0; if (size == 4) data = val; else { - if (gt64120_pcibios_config_access(PCI_ACCESS_READ, bus, devfn, - where, &data)) + if (gt64xxx_pci0_pcibios_config_access(PCI_ACCESS_READ, bus, + devfn, where, &data)) return PCIBIOS_DEVICE_NOT_FOUND; if (size == 1) @@ -139,14 +139,14 @@ static int gt64120_pcibios_write(struct pci_bus *bus, unsigned int devfn, (val << ((where & 3) << 3)); } - if (gt64120_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, where, - &data)) + if (gt64xxx_pci0_pcibios_config_access(PCI_ACCESS_WRITE, bus, devfn, + where, &data)) return PCIBIOS_DEVICE_NOT_FOUND; return PCIBIOS_SUCCESSFUL; } -struct pci_ops gt64120_pci_ops = { - .read = gt64120_pcibios_read, - .write = gt64120_pcibios_write +struct pci_ops gt64xxx_pci0_ops = { + .read = gt64xxx_pci0_pcibios_read, + .write = gt64xxx_pci0_pcibios_write }; diff --git a/arch/mips/pci/ops-tx3927.c b/arch/mips/pci/ops-tx3927.c index 42530a0b84b..aa698bd0d5e 100644 --- a/arch/mips/pci/ops-tx3927.c +++ b/arch/mips/pci/ops-tx3927.c @@ -40,7 +40,6 @@ #include <asm/addrspace.h> #include <asm/jmr3927/jmr3927.h> -#include <asm/debug.h> static inline int mkaddr(unsigned char bus, unsigned char dev_fn, unsigned char where) @@ -130,234 +129,3 @@ struct pci_ops jmr3927_pci_ops = { jmr3927_pci_read_config, jmr3927_pci_write_config, }; - - -#ifndef JMR3927_INIT_INDIRECT_PCI - -inline unsigned long tc_readl(volatile __u32 * addr) -{ - return readl(addr); -} - -inline void tc_writel(unsigned long data, volatile __u32 * addr) -{ - writel(data, addr); -} -#else - -unsigned long tc_readl(volatile __u32 * addr) -{ - unsigned long val; - - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = - (unsigned long) CPHYSADDR(addr); - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = - (PCI_IPCIBE_ICMD_MEMREAD << PCI_IPCIBE_ICMD_SHIFT) | - PCI_IPCIBE_IBE_LONG; - while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); - val = - le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr-> - ipcidata); - /* clear by setting */ - tx3927_pcicptr->istat |= PCI_ISTAT_IDICC; - return val; -} - -void tc_writel(unsigned long data, volatile __u32 * addr) -{ - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = - cpu_to_le32(data); - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = - (unsigned long) CPHYSADDR(addr); - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = - (PCI_IPCIBE_ICMD_MEMWRITE << PCI_IPCIBE_ICMD_SHIFT) | - PCI_IPCIBE_IBE_LONG; - while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); - /* clear by setting */ - tx3927_pcicptr->istat |= PCI_ISTAT_IDICC; -} - -unsigned char tx_ioinb(unsigned char *addr) -{ - unsigned long val; - __u32 ioaddr; - int offset; - int byte; - - ioaddr = (unsigned long) addr; - offset = ioaddr & 0x3; - byte = 0xf & ~(8 >> offset); - - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = - (unsigned long) ioaddr; - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = - (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte; - while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); - val = - le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr-> - ipcidata); - val = val & 0xff; - /* clear by setting */ - tx3927_pcicptr->istat |= PCI_ISTAT_IDICC; - return val; -} - -void tx_iooutb(unsigned long data, unsigned char *addr) -{ - __u32 ioaddr; - int offset; - int byte; - - data = data | (data << 8) | (data << 16) | (data << 24); - ioaddr = (unsigned long) addr; - offset = ioaddr & 0x3; - byte = 0xf & ~(8 >> offset); - - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data; - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = - (unsigned long) ioaddr; - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = - (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte; - while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); - /* clear by setting */ - tx3927_pcicptr->istat |= PCI_ISTAT_IDICC; -} - -unsigned short tx_ioinw(unsigned short *addr) -{ - unsigned long val; - __u32 ioaddr; - int offset; - int byte; - - ioaddr = (unsigned long) addr; - offset = ioaddr & 0x2; - byte = 3 << offset; - - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = - (unsigned long) ioaddr; - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = - (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | byte; - while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); - val = - le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr-> - ipcidata); - val = val & 0xffff; - /* clear by setting */ - tx3927_pcicptr->istat |= PCI_ISTAT_IDICC; - return val; - -} - -void tx_iooutw(unsigned long data, unsigned short *addr) -{ - __u32 ioaddr; - int offset; - int byte; - - data = data | (data << 16); - ioaddr = (unsigned long) addr; - offset = ioaddr & 0x2; - byte = 3 << offset; - - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = data; - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = - (unsigned long) ioaddr; - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = - (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | byte; - while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); - /* clear by setting */ - tx3927_pcicptr->istat |= PCI_ISTAT_IDICC; -} - -unsigned long tx_ioinl(unsigned int *addr) -{ - unsigned long val; - __u32 ioaddr; - - ioaddr = (unsigned long) addr; - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = - (unsigned long) ioaddr; - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = - (PCI_IPCIBE_ICMD_IOREAD << PCI_IPCIBE_ICMD_SHIFT) | - PCI_IPCIBE_IBE_LONG; - while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); - val = - le32_to_cpu(*(volatile u32 *) (unsigned long) & tx3927_pcicptr-> - ipcidata); - /* clear by setting */ - tx3927_pcicptr->istat |= PCI_ISTAT_IDICC; - return val; -} - -void tx_iooutl(unsigned long data, unsigned int *addr) -{ - __u32 ioaddr; - - ioaddr = (unsigned long) addr; - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcidata = - cpu_to_le32(data); - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipciaddr = - (unsigned long) ioaddr; - *(volatile u32 *) (unsigned long) & tx3927_pcicptr->ipcibe = - (PCI_IPCIBE_ICMD_IOWRITE << PCI_IPCIBE_ICMD_SHIFT) | - PCI_IPCIBE_IBE_LONG; - while (!(tx3927_pcicptr->istat & PCI_ISTAT_IDICC)); - /* clear by setting */ - tx3927_pcicptr->istat |= PCI_ISTAT_IDICC; -} - -void tx_insbyte(unsigned char *addr, void *buffer, unsigned int count) -{ - unsigned char *ptr = (unsigned char *) buffer; - - while (count--) { - *ptr++ = tx_ioinb(addr); - } -} - -void tx_insword(unsigned short *addr, void *buffer, unsigned int count) -{ - unsigned short *ptr = (unsigned short *) buffer; - - while (count--) { - *ptr++ = tx_ioinw(addr); - } -} - -void tx_inslong(unsigned int *addr, void *buffer, unsigned int count) -{ - unsigned long *ptr = (unsigned long *) buffer; - - while (count--) { - *ptr++ = tx_ioinl(addr); - } -} - -void tx_outsbyte(unsigned char *addr, void *buffer, unsigned int count) -{ - unsigned char *ptr = (unsigned char *) buffer; - - while (count--) { - tx_iooutb(*ptr++, addr); - } -} - -void tx_outsword(unsigned short *addr, void *buffer, unsigned int count) -{ - unsigned short *ptr = (unsigned short *) buffer; - - while (count--) { - tx_iooutw(*ptr++, addr); - } -} - -void tx_outslong(unsigned int *addr, void *buffer, unsigned int count) -{ - unsigned long *ptr = (unsigned long *) buffer; - - while (count--) { - tx_iooutl(*ptr++, addr); - } -} -#endif diff --git a/arch/mips/pci/pci-lasat.c b/arch/mips/pci/pci-lasat.c index 88fb191ad2e..985784a3e6f 100644 --- a/arch/mips/pci/pci-lasat.c +++ b/arch/mips/pci/pci-lasat.c @@ -12,7 +12,7 @@ #include <asm/bootinfo.h> extern struct pci_ops nile4_pci_ops; -extern struct pci_ops gt64120_pci_ops; +extern struct pci_ops gt64xxx_pci0_ops; static struct resource lasat_pci_mem_resource = { .name = "LASAT PCI MEM", .start = 0x18000000, @@ -38,7 +38,7 @@ static int __init lasat_pci_setup(void) switch (mips_machtype) { case MACH_LASAT_100: - lasat_pci_controller.pci_ops = >64120_pci_ops; + lasat_pci_controller.pci_ops = >64xxx_pci0_ops; break; case MACH_LASAT_200: lasat_pci_controller.pci_ops = &nile4_pci_ops; diff --git a/arch/mips/pci/pci-ocelot.c b/arch/mips/pci/pci-ocelot.c index 2b9495dce6b..7f94f26d35a 100644 --- a/arch/mips/pci/pci-ocelot.c +++ b/arch/mips/pci/pci-ocelot.c @@ -81,7 +81,7 @@ static struct resource ocelot_io_resource = { }; static struct pci_controller ocelot_pci_controller = { - .pci_ops = gt64120_pci_ops; + .pci_ops = gt64xxx_pci0_ops; .mem_resource = &ocelot_mem_resource; .io_resource = &ocelot_io_resource; }; diff --git a/arch/mips/pci/pci.c b/arch/mips/pci/pci.c index de7cfc559dd..8108231f2e2 100644 --- a/arch/mips/pci/pci.c +++ b/arch/mips/pci/pci.c @@ -77,6 +77,13 @@ pcibios_align_resource(void *data, struct resource *res, void __init register_pci_controller(struct pci_controller *hose) { + if (request_resource(&iomem_resource, hose->mem_resource) < 0) + goto out; + if (request_resource(&ioport_resource, hose->io_resource) < 0) { + release_resource(hose->mem_resource); + goto out; + } + *hose_tail = hose; hose_tail = &hose->next; @@ -87,6 +94,11 @@ void __init register_pci_controller(struct pci_controller *hose) printk(KERN_WARNING "registering PCI controller with io_map_base unset\n"); } + return; + +out: + printk(KERN_WARNING + "Skipping PCI bus scan due to resource conflict\n"); } /* Most MIPS systems have straight-forward swizzling needs. */ @@ -121,11 +133,6 @@ static int __init pcibios_init(void) /* Scan all of the recorded PCI controllers. */ for (next_busno = 0, hose = hose_head; hose; hose = hose->next) { - if (request_resource(&iomem_resource, hose->mem_resource) < 0) - goto out; - if (request_resource(&ioport_resource, hose->io_resource) < 0) - goto out_free_mem_resource; - if (!hose->iommu) PCI_DMA_BUS_IS_PHYS = 1; @@ -144,14 +151,6 @@ static int __init pcibios_init(void) need_domain_info = 1; } } - continue; - -out_free_mem_resource: - release_resource(hose->mem_resource); - -out: - printk(KERN_WARNING - "Skipping PCI bus scan due to resource conflict\n"); } if (!pci_probe_only) diff --git a/arch/mips/sgi-ip22/ip22-nvram.c b/arch/mips/sgi-ip22/ip22-nvram.c index fd29fd407ae..e19d60d5fcc 100644 --- a/arch/mips/sgi-ip22/ip22-nvram.c +++ b/arch/mips/sgi-ip22/ip22-nvram.c @@ -52,8 +52,7 @@ * national semiconductor nv ram chip the op code is 3 bits and * the address is 6/8 bits. */ -static inline void eeprom_cmd(volatile unsigned int *ctrl, unsigned cmd, - unsigned reg) +static inline void eeprom_cmd(unsigned int *ctrl, unsigned cmd, unsigned reg) { unsigned short ser_cmd; int i; @@ -61,33 +60,34 @@ static inline void eeprom_cmd(volatile unsigned int *ctrl, unsigned cmd, ser_cmd = cmd | (reg << (16 - BITS_IN_COMMAND)); for (i = 0; i < BITS_IN_COMMAND; i++) { if (ser_cmd & (1<<15)) /* if high order bit set */ - *ctrl |= EEPROM_DATO; + writel(readl(ctrl) | EEPROM_DATO, ctrl); else - *ctrl &= ~EEPROM_DATO; - *ctrl &= ~EEPROM_ECLK; - *ctrl |= EEPROM_ECLK; + writel(readl(ctrl) & ~EEPROM_DATO, ctrl); + writel(readl(ctrl) & ~EEPROM_ECLK, ctrl); + writel(readl(ctrl) | EEPROM_ECLK, ctrl); ser_cmd <<= 1; } - *ctrl &= ~EEPROM_DATO; /* see data sheet timing diagram */ + /* see data sheet timing diagram */ + writel(readl(ctrl) & ~EEPROM_DATO, ctrl); } -unsigned short ip22_eeprom_read(volatile unsigned int *ctrl, int reg) +unsigned short ip22_eeprom_read(unsigned int *ctrl, int reg) { unsigned short res = 0; int i; - *ctrl &= ~EEPROM_EPROT; + writel(readl(ctrl) & ~EEPROM_EPROT, ctrl); eeprom_cs_on(ctrl); eeprom_cmd(ctrl, EEPROM_READ, reg); /* clock the data ouf of serial mem */ for (i = 0; i < 16; i++) { - *ctrl &= ~EEPROM_ECLK; + writel(readl(ctrl) & ~EEPROM_ECLK, ctrl); delay(); - *ctrl |= EEPROM_ECLK; + writel(readl(ctrl) | EEPROM_ECLK, ctrl); delay(); res <<= 1; - if (*ctrl & EEPROM_DATI) + if (readl(ctrl) & EEPROM_DATI) res |= 1; } diff --git a/arch/mips/sgi-ip22/ip22-time.c b/arch/mips/sgi-ip22/ip22-time.c index 20555473409..8e88a442b22 100644 --- a/arch/mips/sgi-ip22/ip22-time.c +++ b/arch/mips/sgi-ip22/ip22-time.c @@ -94,7 +94,7 @@ static int indy_rtc_set_time(unsigned long tim) static unsigned long dosample(void) { u32 ct0, ct1; - volatile u8 msb, lsb; + u8 msb, lsb; /* Start the counter. */ sgint->tcword = (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL | @@ -107,21 +107,21 @@ static unsigned long dosample(void) /* Latch and spin until top byte of counter2 is zero */ do { - sgint->tcword = SGINT_TCWORD_CNT2 | SGINT_TCWORD_CLAT; - lsb = sgint->tcnt2; - msb = sgint->tcnt2; + writeb(SGINT_TCWORD_CNT2 | SGINT_TCWORD_CLAT, &sgint->tcword); + lsb = readb(&sgint->tcnt2); + msb = readb(&sgint->tcnt2); ct1 = read_c0_count(); } while (msb); /* Stop the counter. */ - sgint->tcword = (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL | - SGINT_TCWORD_MSWST); + writeb(sgint->tcword, (SGINT_TCWORD_CNT2 | SGINT_TCWORD_CALL | + SGINT_TCWORD_MSWST)); /* * Return the difference, this is how far the r4k counter increments * for every 1/HZ seconds. We round off the nearest 1 MHz of master * clock (= 1000000 / HZ / 2). */ - /*return (ct1 - ct0 + (500000/HZ/2)) / (500000/HZ) * (500000/HZ);*/ + return (ct1 - ct0) / (500000/HZ) * (500000/HZ); } diff --git a/arch/mips/sibyte/Kconfig b/arch/mips/sibyte/Kconfig index bdf24a7b549..e6b003ec671 100644 --- a/arch/mips/sibyte/Kconfig +++ b/arch/mips/sibyte/Kconfig @@ -2,6 +2,7 @@ config SIBYTE_SB1250 bool select HW_HAS_PCI select SIBYTE_ENABLE_LDT_IF_PCI + select SIBYTE_HAS_ZBUS_PROFILING select SIBYTE_SB1xxx_SOC select SYS_SUPPORTS_SMP @@ -34,6 +35,7 @@ config SIBYTE_BCM112X config SIBYTE_BCM1x80 bool select HW_HAS_PCI + select SIBYTE_HAS_ZBUS_PROFILING select SIBYTE_SB1xxx_SOC select SYS_SUPPORTS_SMP diff --git a/arch/mips/sibyte/common/Makefile b/arch/mips/sibyte/common/Makefile new file mode 100644 index 00000000000..8a06a4fb521 --- /dev/null +++ b/arch/mips/sibyte/common/Makefile @@ -0,0 +1,5 @@ +obj-y := + +obj-$(CONFIG_SIBYTE_TBPROF) += sb_tbprof.o + +EXTRA_AFLAGS := $(CFLAGS) diff --git a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c b/arch/mips/sibyte/common/sb_tbprof.c index ea0ca131a3c..4fcdaa8ba51 100644 --- a/arch/mips/sibyte/sb1250/bcm1250_tbprof.c +++ b/arch/mips/sibyte/common/sb_tbprof.c @@ -31,14 +31,29 @@ #include <linux/vmalloc.h> #include <linux/fs.h> #include <linux/errno.h> -#include <linux/types.h> #include <linux/wait.h> - #include <asm/io.h> #include <asm/sibyte/sb1250.h> + +#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +#include <asm/sibyte/bcm1480_regs.h> +#include <asm/sibyte/bcm1480_scd.h> +#include <asm/sibyte/bcm1480_int.h> +#elif defined(CONFIG_SIBYTE_SB1250) || defined(CONFIG_SIBYTE_BCM112X) #include <asm/sibyte/sb1250_regs.h> #include <asm/sibyte/sb1250_scd.h> #include <asm/sibyte/sb1250_int.h> +#else +#error invalid SiByte UART configuation +#endif + +#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) +#undef K_INT_TRACE_FREEZE +#define K_INT_TRACE_FREEZE K_BCM1480_INT_TRACE_FREEZE +#undef K_INT_PERF_CNT +#define K_INT_PERF_CNT K_BCM1480_INT_PERF_CNT +#endif + #include <asm/system.h> #include <asm/uaccess.h> @@ -118,7 +133,7 @@ static struct sbprof_tb sbp; : /* inputs */ \ : /* modifies */ "$8" ) -#define DEVNAME "bcm1250_tbprof" +#define DEVNAME "sb_tbprof" #define TB_FULL (sbp.next_tb_sample == MAX_TB_SAMPLES) @@ -132,6 +147,7 @@ static struct sbprof_tb sbp; * overflow. * * We map the interrupt for trace_buffer_freeze to handle it on CPU 0. + * */ static u64 tb_period; @@ -143,25 +159,36 @@ static void arm_tb(void) u64 tb_options = M_SCD_TRACE_CFG_FREEZE_FULL; /* - * Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to trigger - *start of trace. XXX vary sampling period + * Generate an SCD_PERFCNT interrupt in TB_PERIOD Zclks to + * trigger start of trace. XXX vary sampling period */ __raw_writeq(0, IOADDR(A_SCD_PERF_CNT_1)); scdperfcnt = __raw_readq(IOADDR(A_SCD_PERF_CNT_CFG)); /* - * Unfortunately, in Pass 2 we must clear all counters to knock down a - * previous interrupt request. This means that bus profiling requires - * ALL of the SCD perf counters. + * Unfortunately, in Pass 2 we must clear all counters to knock down + * a previous interrupt request. This means that bus profiling + * requires ALL of the SCD perf counters. */ +#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) + __raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) | + /* keep counters 0,2,3,4,5,6,7 as is */ + V_SPC_CFG_SRC1(1), /* counter 1 counts cycles */ + IOADDR(A_BCM1480_SCD_PERF_CNT_CFG0)); + __raw_writeq( + M_SPC_CFG_ENABLE | /* enable counting */ + M_SPC_CFG_CLEAR | /* clear all counters */ + V_SPC_CFG_SRC1(1), /* counter 1 counts cycles */ + IOADDR(A_BCM1480_SCD_PERF_CNT_CFG1)); +#else __raw_writeq((scdperfcnt & ~M_SPC_CFG_SRC1) | /* keep counters 0,2,3 as is */ M_SPC_CFG_ENABLE | /* enable counting */ M_SPC_CFG_CLEAR | /* clear all counters */ V_SPC_CFG_SRC1(1), /* counter 1 counts cycles */ IOADDR(A_SCD_PERF_CNT_CFG)); +#endif __raw_writeq(next, IOADDR(A_SCD_PERF_CNT_1)); - /* Reset the trace buffer */ __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); #if 0 && defined(M_SCD_TRACE_CFG_FORCECNT) @@ -190,38 +217,37 @@ static irqreturn_t sbprof_tb_intr(int irq, void *dev_id) /* Subscripts decrease to put bundle in the order */ /* t0 lo, t0 hi, t1 lo, t1 hi, t2 lo, t2 hi */ p[i - 1] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); - /* read t2 hi */ + /* read t2 hi */ p[i - 2] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); - /* read t2 lo */ + /* read t2 lo */ p[i - 3] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); - /* read t1 hi */ + /* read t1 hi */ p[i - 4] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); - /* read t1 lo */ + /* read t1 lo */ p[i - 5] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); - /* read t0 hi */ + /* read t0 hi */ p[i - 6] = __raw_readq(IOADDR(A_SCD_TRACE_READ)); - /* read t0 lo */ + /* read t0 lo */ } if (!sbp.tb_enable) { pr_debug(DEVNAME ": tb_intr shutdown\n"); __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); sbp.tb_armed = 0; - wake_up(&sbp.tb_sync); + wake_up_interruptible(&sbp.tb_sync); } else { - arm_tb(); /* knock down current interrupt and get another one later */ + /* knock down current interrupt and get another one later */ + arm_tb(); } } else { /* No more trace buffer samples */ pr_debug(DEVNAME ": tb_intr full\n"); __raw_writeq(M_SCD_TRACE_CFG_RESET, IOADDR(A_SCD_TRACE_CFG)); sbp.tb_armed = 0; - if (!sbp.tb_enable) { - wake_up(&sbp.tb_sync); - } - wake_up(&sbp.tb_read); + if (!sbp.tb_enable) + wake_up_interruptible(&sbp.tb_sync); + wake_up_interruptible(&sbp.tb_read); } - return IRQ_HANDLED; } @@ -250,8 +276,8 @@ static int sbprof_zbprof_start(struct file *filp) sbp.next_tb_sample = 0; filp->f_pos = 0; - err = request_irq(K_INT_TRACE_FREEZE, sbprof_tb_intr, 0, - DEVNAME " trace freeze", &sbp); + err = request_irq (K_INT_TRACE_FREEZE, sbprof_tb_intr, 0, + DEVNAME " trace freeze", &sbp); if (err) return -EBUSY; @@ -263,23 +289,29 @@ static int sbprof_zbprof_start(struct file *filp) IOADDR(A_SCD_PERF_CNT_CFG)); /* - * We grab this interrupt to prevent others from trying to use it, even - * though we don't want to service the interrupts (they only feed into - * the trace-on-interrupt mechanism) + * We grab this interrupt to prevent others from trying to use + * it, even though we don't want to service the interrupts + * (they only feed into the trace-on-interrupt mechanism) */ - err = request_irq(K_INT_PERF_CNT, sbprof_pc_intr, 0, - DEVNAME " scd perfcnt", &sbp); - if (err) - goto out_free_irq; + if (request_irq(K_INT_PERF_CNT, sbprof_pc_intr, 0, DEVNAME " scd perfcnt", &sbp)) { + free_irq(K_INT_TRACE_FREEZE, &sbp); + return -EBUSY; + } /* - * I need the core to mask these, but the interrupt mapper to pass them - * through. I am exploiting my knowledge that cp0_status masks out - * IP[5]. krw + * I need the core to mask these, but the interrupt mapper to + * pass them through. I am exploiting my knowledge that + * cp0_status masks out IP[5]. krw */ +#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) + __raw_writeq(K_BCM1480_INT_MAP_I3, + IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_MAP_BASE_L) + + ((K_BCM1480_INT_PERF_CNT & 0x3f) << 3))); +#else __raw_writeq(K_INT_MAP_I3, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_MAP_BASE) + (K_INT_PERF_CNT << 3))); +#endif /* Initialize address traps */ __raw_writeq(0, IOADDR(A_ADDR_TRAP_UP_0)); @@ -298,7 +330,7 @@ static int sbprof_zbprof_start(struct file *filp) __raw_writeq(0, IOADDR(A_ADDR_TRAP_CFG_3)); /* Initialize Trace Event 0-7 */ - /* when interrupt */ + /* when interrupt */ __raw_writeq(M_SCD_TREVT_INTERRUPT, IOADDR(A_SCD_TRACE_EVENT_0)); __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_1)); __raw_writeq(0, IOADDR(A_SCD_TRACE_EVENT_2)); @@ -324,24 +356,23 @@ static int sbprof_zbprof_start(struct file *filp) __raw_writeq(0, IOADDR(A_SCD_TRACE_SEQUENCE_7)); /* Now indicate the PERF_CNT interrupt as a trace-relevant interrupt */ +#if defined(CONFIG_SIBYTE_BCM1x55) || defined(CONFIG_SIBYTE_BCM1x80) + __raw_writeq(1ULL << (K_BCM1480_INT_PERF_CNT & 0x3f), + IOADDR(A_BCM1480_IMR_REGISTER(0, R_BCM1480_IMR_INTERRUPT_TRACE_L))); +#else __raw_writeq(1ULL << K_INT_PERF_CNT, IOADDR(A_IMR_REGISTER(0, R_IMR_INTERRUPT_TRACE))); - +#endif arm_tb(); pr_debug(DEVNAME ": done starting\n"); return 0; - -out_free_irq: - free_irq(K_INT_TRACE_FREEZE, &sbp); - - return err; } static int sbprof_zbprof_stop(void) { - int err; + int err = 0; pr_debug(DEVNAME ": stopping\n"); @@ -365,7 +396,7 @@ static int sbprof_zbprof_stop(void) pr_debug(DEVNAME ": done stopping\n"); - return 0; + return err; } static int sbprof_tb_open(struct inode *inode, struct file *filp) @@ -380,11 +411,9 @@ static int sbprof_tb_open(struct inode *inode, struct file *filp) return -EBUSY; memset(&sbp, 0, sizeof(struct sbprof_tb)); - sbp.sbprof_tbbuf = vmalloc(MAX_TBSAMPLE_BYTES); if (!sbp.sbprof_tbbuf) return -ENOMEM; - memset(sbp.sbprof_tbbuf, 0, MAX_TBSAMPLE_BYTES); init_waitqueue_head(&sbp.tb_sync); init_waitqueue_head(&sbp.tb_read); @@ -397,8 +426,9 @@ static int sbprof_tb_open(struct inode *inode, struct file *filp) static int sbprof_tb_release(struct inode *inode, struct file *filp) { - int minor = iminor(inode); + int minor; + minor = iminor(inode); if (minor != 0 || !sbp.open) return -ENODEV; @@ -419,10 +449,10 @@ static ssize_t sbprof_tb_read(struct file *filp, char *buf, size_t size, loff_t *offp) { int cur_sample, sample_off, cur_count, sample_left; - long cur_off = *offp; - char *dest = buf; - int count = 0; char *src; + int count = 0; + char *dest = buf; + long cur_off = *offp; if (!access_ok(VERIFY_WRITE, buf, size)) return -EFAULT; @@ -445,7 +475,6 @@ static ssize_t sbprof_tb_read(struct file *filp, char *buf, mutex_unlock(&sbp.lock); return err; } - pr_debug(DEVNAME ": read from sample %d, %d bytes\n", cur_sample, cur_count); size -= cur_count; @@ -461,45 +490,46 @@ static ssize_t sbprof_tb_read(struct file *filp, char *buf, dest += cur_count; count += cur_count; } - *offp = cur_off; mutex_unlock(&sbp.lock); return count; } -static long sbprof_tb_ioctl(struct file *filp, unsigned int command, - unsigned long arg) +static long sbprof_tb_ioctl(struct file *filp, + unsigned int command, + unsigned long arg) { - int error = 0; + int err = 0; switch (command) { case SBPROF_ZBSTART: mutex_lock(&sbp.lock); - error = sbprof_zbprof_start(filp); + err = sbprof_zbprof_start(filp); mutex_unlock(&sbp.lock); break; case SBPROF_ZBSTOP: mutex_lock(&sbp.lock); - error = sbprof_zbprof_stop(); + err = sbprof_zbprof_stop(); mutex_unlock(&sbp.lock); break; - case SBPROF_ZBWAITFULL: - error = wait_event_interruptible(sbp.tb_read, TB_FULL); - if (error) + case SBPROF_ZBWAITFULL: { + err = wait_event_interruptible(sbp.tb_read, TB_FULL); + if (err) break; - error = put_user(TB_FULL, (int *) arg); + err = put_user(TB_FULL, (int *) arg); break; + } default: - error = -EINVAL; + err = -EINVAL; break; } - return error; + return err; } static const struct file_operations sbprof_tb_fops = { @@ -544,8 +574,8 @@ static int __init sbprof_tb_init(void) sbp.open = 0; tb_period = zbbus_mhz * 10000LL; - pr_info(DEVNAME ": initialized - tb_period = %lld\n", tb_period); - + pr_info(DEVNAME ": initialized - tb_period = %lld\n", + (long long) tb_period); return 0; out_class: diff --git a/arch/mips/sibyte/sb1250/Makefile b/arch/mips/sibyte/sb1250/Makefile index 04c0f1a7f61..df662c61473 100644 --- a/arch/mips/sibyte/sb1250/Makefile +++ b/arch/mips/sibyte/sb1250/Makefile @@ -1,6 +1,5 @@ obj-y := setup.o irq.o time.o obj-$(CONFIG_SMP) += smp.o -obj-$(CONFIG_SIBYTE_TBPROF) += bcm1250_tbprof.o obj-$(CONFIG_SIBYTE_STANDALONE) += prom.o obj-$(CONFIG_SIBYTE_BUS_WATCHER) += bus_watcher.o diff --git a/arch/mips/sni/pcimt.c b/arch/mips/sni/pcimt.c index 8e8593b64f6..9ee208daa8b 100644 --- a/arch/mips/sni/pcimt.c +++ b/arch/mips/sni/pcimt.c @@ -91,7 +91,7 @@ static struct platform_device pcimt_serial8250_device = { }; static struct resource sni_io_resource = { - .start = 0x00001000UL, + .start = 0x00000000UL, .end = 0x03bfffffUL, .name = "PCIMT IO MEM", .flags = IORESOURCE_IO, @@ -132,107 +132,19 @@ static struct resource pcimt_io_resources[] = { }; static struct resource sni_mem_resource = { - .start = 0x10000000UL, - .end = 0xffffffffUL, + .start = 0x18000000UL, + .end = 0x1fbfffffUL, .name = "PCIMT PCI MEM", .flags = IORESOURCE_MEM }; -/* - * The RM200/RM300 has a few holes in it's PCI/EISA memory address space used - * for other purposes. Be paranoid and allocate all of the before the PCI - * code gets a chance to to map anything else there ... - * - * This leaves the following areas available: - * - * 0x10000000 - 0x1009ffff (640kB) PCI/EISA/ISA Bus Memory - * 0x10100000 - 0x13ffffff ( 15MB) PCI/EISA/ISA Bus Memory - * 0x18000000 - 0x1fbfffff (124MB) PCI/EISA Bus Memory - * 0x1ff08000 - 0x1ffeffff (816kB) PCI/EISA Bus Memory - * 0xa0000000 - 0xffffffff (1.5GB) PCI/EISA Bus Memory - */ -static struct resource pcimt_mem_resources[] = { - { - .start = 0x100a0000, - .end = 0x100bffff, - .name = "Video RAM area", - .flags = IORESOURCE_BUSY - }, { - .start = 0x100c0000, - .end = 0x100fffff, - .name = "ISA Reserved", - .flags = IORESOURCE_BUSY - }, { - .start = 0x14000000, - .end = 0x17bfffff, - .name = "PCI IO", - .flags = IORESOURCE_BUSY - }, { - .start = 0x17c00000, - .end = 0x17ffffff, - .name = "Cache Replacement Area", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1a000000, - .end = 0x1a000003, - .name = "PCI INT Acknowledge", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1fc00000, - .end = 0x1fc7ffff, - .name = "Boot PROM", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1fc80000, - .end = 0x1fcfffff, - .name = "Diag PROM", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1fd00000, - .end = 0x1fdfffff, - .name = "X-Bus", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1fe00000, - .end = 0x1fefffff, - .name = "BIOS map", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1ff00000, - .end = 0x1ff7ffff, - .name = "NVRAM / EEPROM", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1fff0000, - .end = 0x1fffefff, - .name = "ASIC PCI", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1ffff000, - .end = 0x1fffffff, - .name = "MP Agent", - .flags = IORESOURCE_BUSY - }, { - .start = 0x20000000, - .end = 0x9fffffff, - .name = "Main Memory", - .flags = IORESOURCE_BUSY - } -}; - static void __init sni_pcimt_resource_init(void) { int i; /* request I/O space for devices used on all i[345]86 PCs */ for (i = 0; i < ARRAY_SIZE(pcimt_io_resources); i++) - request_resource(&ioport_resource, pcimt_io_resources + i); - - /* request mem space for pcimt-specific devices */ - for (i = 0; i < ARRAY_SIZE(pcimt_mem_resources); i++) - request_resource(&sni_mem_resource, pcimt_mem_resources + i); - - ioport_resource.end = sni_io_resource.end; + request_resource(&sni_io_resource, pcimt_io_resources + i); } extern struct pci_ops sni_pcimt_ops; @@ -240,9 +152,10 @@ extern struct pci_ops sni_pcimt_ops; static struct pci_controller sni_controller = { .pci_ops = &sni_pcimt_ops, .mem_resource = &sni_mem_resource, - .mem_offset = 0x10000000UL, + .mem_offset = 0x00000000UL, .io_resource = &sni_io_resource, - .io_offset = 0x00000000UL + .io_offset = 0x00000000UL, + .io_map_base = SNI_PORT_BASE }; static void enable_pcimt_irq(unsigned int irq) @@ -363,15 +276,17 @@ void __init sni_pcimt_irq_init(void) void sni_pcimt_init(void) { - sni_pcimt_resource_init(); sni_pcimt_detect(); sni_pcimt_sc_init(); rtc_mips_get_time = mc146818_get_cmos_time; rtc_mips_set_time = mc146818_set_rtc_mmss; board_time_init = sni_cpu_time_init; + ioport_resource.end = sni_io_resource.end; #ifdef CONFIG_PCI + PCIBIOS_MIN_IO = 0x9000; register_pci_controller(&sni_controller); #endif + sni_pcimt_resource_init(); } static int __init snirm_pcimt_setup_devinit(void) diff --git a/arch/mips/sni/pcit.c b/arch/mips/sni/pcit.c index 1dfc3f00bbd..00d151f4d12 100644 --- a/arch/mips/sni/pcit.c +++ b/arch/mips/sni/pcit.c @@ -43,7 +43,7 @@ static struct platform_device pcit_serial8250_device = { }; static struct plat_serial8250_port pcit_cplus_data[] = { - PORT(0x3f8, 4), + PORT(0x3f8, 0), PORT(0x2f8, 3), PORT(0x3e8, 4), PORT(0x2e8, 3), @@ -59,9 +59,9 @@ static struct platform_device pcit_cplus_serial8250_device = { }; static struct resource sni_io_resource = { - .start = 0x00001000UL, + .start = 0x00000000UL, .end = 0x03bfffffUL, - .name = "PCIT IO MEM", + .name = "PCIT IO", .flags = IORESOURCE_IO, }; @@ -92,6 +92,11 @@ static struct resource pcit_io_resources[] = { .name = "dma2", .flags = IORESOURCE_BUSY }, { + .start = 0xcf8, + .end = 0xcfb, + .name = "PCI config addr", + .flags = IORESOURCE_BUSY + }, { .start = 0xcfc, .end = 0xcff, .name = "PCI config data", @@ -100,107 +105,19 @@ static struct resource pcit_io_resources[] = { }; static struct resource sni_mem_resource = { - .start = 0x10000000UL, - .end = 0xffffffffUL, + .start = 0x18000000UL, + .end = 0x1fbfffffUL, .name = "PCIT PCI MEM", .flags = IORESOURCE_MEM }; -/* - * The RM200/RM300 has a few holes in it's PCI/EISA memory address space used - * for other purposes. Be paranoid and allocate all of the before the PCI - * code gets a chance to to map anything else there ... - * - * This leaves the following areas available: - * - * 0x10000000 - 0x1009ffff (640kB) PCI/EISA/ISA Bus Memory - * 0x10100000 - 0x13ffffff ( 15MB) PCI/EISA/ISA Bus Memory - * 0x18000000 - 0x1fbfffff (124MB) PCI/EISA Bus Memory - * 0x1ff08000 - 0x1ffeffff (816kB) PCI/EISA Bus Memory - * 0xa0000000 - 0xffffffff (1.5GB) PCI/EISA Bus Memory - */ -static struct resource pcit_mem_resources[] = { - { - .start = 0x14000000, - .end = 0x17bfffff, - .name = "PCI IO", - .flags = IORESOURCE_BUSY - }, { - .start = 0x17c00000, - .end = 0x17ffffff, - .name = "Cache Replacement Area", - .flags = IORESOURCE_BUSY - }, { - .start = 0x180a0000, - .end = 0x180bffff, - .name = "Video RAM area", - .flags = IORESOURCE_BUSY - }, { - .start = 0x180c0000, - .end = 0x180fffff, - .name = "ISA Reserved", - .flags = IORESOURCE_BUSY - }, { - .start = 0x19000000, - .end = 0x1fbfffff, - .name = "PCI MEM", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1fc00000, - .end = 0x1fc7ffff, - .name = "Boot PROM", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1fc80000, - .end = 0x1fcfffff, - .name = "Diag PROM", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1fd00000, - .end = 0x1fdfffff, - .name = "X-Bus", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1fe00000, - .end = 0x1fefffff, - .name = "BIOS map", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1ff00000, - .end = 0x1ff7ffff, - .name = "NVRAM / EEPROM", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1fff0000, - .end = 0x1fffefff, - .name = "MAUI ASIC", - .flags = IORESOURCE_BUSY - }, { - .start = 0x1ffff000, - .end = 0x1fffffff, - .name = "MP Agent", - .flags = IORESOURCE_BUSY - }, { - .start = 0x20000000, - .end = 0x9fffffff, - .name = "Main Memory", - .flags = IORESOURCE_BUSY - } -}; - static void __init sni_pcit_resource_init(void) { int i; /* request I/O space for devices used on all i[345]86 PCs */ for (i = 0; i < ARRAY_SIZE(pcit_io_resources); i++) - request_resource(&ioport_resource, pcit_io_resources + i); - - /* request mem space for pcimt-specific devices */ - for (i = 0; i < ARRAY_SIZE(pcit_mem_resources); i++) - request_resource(&sni_mem_resource, pcit_mem_resources + i); - - ioport_resource.end = sni_io_resource.end; + request_resource(&sni_io_resource, pcit_io_resources + i); } @@ -209,9 +126,10 @@ extern struct pci_ops sni_pcit_ops; static struct pci_controller sni_pcit_controller = { .pci_ops = &sni_pcit_ops, .mem_resource = &sni_mem_resource, - .mem_offset = 0x10000000UL, + .mem_offset = 0x00000000UL, .io_resource = &sni_io_resource, - .io_offset = 0x00000000UL + .io_offset = 0x00000000UL, + .io_map_base = SNI_PORT_BASE }; static void enable_pcit_irq(unsigned int irq) @@ -262,7 +180,7 @@ static void pcit_hwint0(void) int irq; clear_c0_status(IE_IRQ0); - irq = ffs((pending >> 16) & 0x7f); + irq = ffs((pending >> 16) & 0x3f); if (likely(irq > 0)) do_IRQ (irq + SNI_PCIT_INT_START - 1); @@ -289,6 +207,8 @@ static void sni_pcit_hwint_cplus(void) if (pending & C_IRQ0) pcit_hwint0(); + else if (pending & C_IRQ1) + do_IRQ (MIPS_CPU_IRQ_BASE + 3); else if (pending & C_IRQ2) do_IRQ (MIPS_CPU_IRQ_BASE + 4); else if (pending & C_IRQ3) @@ -317,21 +237,23 @@ void __init sni_pcit_cplus_irq_init(void) mips_cpu_irq_init(); for (i = SNI_PCIT_INT_START; i <= SNI_PCIT_INT_END; i++) set_irq_chip(i, &pcit_irq_type); - *(volatile u32 *)SNI_PCIT_INT_REG = 0; + *(volatile u32 *)SNI_PCIT_INT_REG = 0x40000000; sni_hwint = sni_pcit_hwint_cplus; change_c0_status(ST0_IM, IE_IRQ0); - setup_irq (SNI_PCIT_INT_START + 6, &sni_isa_irq); + setup_irq (MIPS_CPU_IRQ_BASE + 3, &sni_isa_irq); } void sni_pcit_init(void) { - sni_pcit_resource_init(); rtc_mips_get_time = mc146818_get_cmos_time; rtc_mips_set_time = mc146818_set_rtc_mmss; board_time_init = sni_cpu_time_init; + ioport_resource.end = sni_io_resource.end; #ifdef CONFIG_PCI + PCIBIOS_MIN_IO = 0x9000; register_pci_controller(&sni_pcit_controller); #endif + sni_pcit_resource_init(); } static int __init snirm_pcit_setup_devinit(void) diff --git a/arch/mips/vr41xx/Kconfig b/arch/mips/vr41xx/Kconfig index 92f41f6f934..8f4d3e74c23 100644 --- a/arch/mips/vr41xx/Kconfig +++ b/arch/mips/vr41xx/Kconfig @@ -1,6 +1,10 @@ -config CASIO_E55 - bool "Support for CASIO CASSIOPEIA E-10/15/55/65" +choice + prompt "Machine type" depends on MACH_VR41XX + default TANBAC_TB022X + +config CASIO_E55 + bool "CASIO CASSIOPEIA E-10/15/55/65" select DMA_NONCOHERENT select IRQ_CPU select ISA @@ -8,8 +12,7 @@ config CASIO_E55 select SYS_SUPPORTS_LITTLE_ENDIAN config IBM_WORKPAD - bool "Support for IBM WorkPad z50" - depends on MACH_VR41XX + bool "IBM WorkPad z50" select DMA_NONCOHERENT select IRQ_CPU select ISA @@ -17,26 +20,18 @@ config IBM_WORKPAD select SYS_SUPPORTS_LITTLE_ENDIAN config NEC_CMBVR4133 - bool "Support for NEC CMB-VR4133" - depends on MACH_VR41XX + bool "NEC CMB-VR4133" select DMA_NONCOHERENT select IRQ_CPU select HW_HAS_PCI select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN -config ROCKHOPPER - bool "Support for Rockhopper baseboard" - depends on NEC_CMBVR4133 - select I8259 - select HAVE_STD_PC_SERIAL_PORT - config TANBAC_TB022X - bool "Support for TANBAC VR4131 multichip module and TANBAC VR4131DIMM" - depends on MACH_VR41XX + bool "TANBAC VR4131 multichip module and TANBAC VR4131DIMM" select DMA_NONCOHERENT - select HW_HAS_PCI select IRQ_CPU + select HW_HAS_PCI select SYS_SUPPORTS_32BIT_KERNEL select SYS_SUPPORTS_LITTLE_ENDIAN help @@ -46,40 +41,65 @@ config TANBAC_TB022X Please refer to <http://www.tanbac.co.jp/> about VR4131 multichip module and VR4131DIMM. -config TANBAC_TB0226 - bool "Support for TANBAC Mbase(TB0226)" +config VICTOR_MPC30X + bool "Victor MP-C303/304" + select DMA_NONCOHERENT + select IRQ_CPU + select HW_HAS_PCI + select PCI_VR41XX + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + +config ZAO_CAPCELLA + bool "ZAO Networks Capcella" + select DMA_NONCOHERENT + select IRQ_CPU + select HW_HAS_PCI + select PCI_VR41XX + select SYS_SUPPORTS_32BIT_KERNEL + select SYS_SUPPORTS_LITTLE_ENDIAN + +endchoice + +config ROCKHOPPER + bool "Support for Rockhopper base board" + depends on NEC_CMBVR4133 + select PCI_VR41XX + select I8259 + select HAVE_STD_PC_SERIAL_PORT + +choice + prompt "Base board type" depends on TANBAC_TB022X + default TANBAC_TB0287 + +config TANBAC_TB0219 + bool "TANBAC DIMM Evaluation Kit(TB0219)" select GPIO_VR41XX + select PCI_VR41XX + help + The TANBAC DIMM Evaluation Kit(TB0219) is a MIPS-based platform + manufactured by TANBAC. + Please refer to <http://www.tanbac.co.jp/> about DIMM Evaluation Kit. + +config TANBAC_TB0226 + bool "TANBAC Mbase(TB0226)" + select GPIO_VR41XX + select PCI_VR41XX help The TANBAC Mbase(TB0226) is a MIPS-based platform manufactured by TANBAC. Please refer to <http://www.tanbac.co.jp/> about Mbase. config TANBAC_TB0287 - bool "Support for TANBAC Mini-ITX DIMM base(TB0287)" - depends on TANBAC_TB022X + bool "TANBAC Mini-ITX DIMM base(TB0287)" + select PCI_VR41XX help The TANBAC Mini-ITX DIMM base(TB0287) is a MIPS-based platform manufactured by TANBAC. Please refer to <http://www.tanbac.co.jp/> about Mini-ITX DIMM base. -config VICTOR_MPC30X - bool "Support for Victor MP-C303/304" - depends on MACH_VR41XX - select DMA_NONCOHERENT - select HW_HAS_PCI - select IRQ_CPU - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN - -config ZAO_CAPCELLA - bool "Support for ZAO Networks Capcella" - depends on MACH_VR41XX - select DMA_NONCOHERENT - select HW_HAS_PCI - select IRQ_CPU - select SYS_SUPPORTS_32BIT_KERNEL - select SYS_SUPPORTS_LITTLE_ENDIAN +endchoice config PCI_VR41XX bool "Add PCI control unit support of NEC VR4100 series" diff --git a/include/asm-mips/cacheflush.h b/include/asm-mips/cacheflush.h index 28d907d4347..4933b4947ed 100644 --- a/include/asm-mips/cacheflush.h +++ b/include/asm-mips/cacheflush.h @@ -96,6 +96,6 @@ extern void (*flush_data_cache_page)(unsigned long addr); unsigned long __init run_uncached(void *func); extern void *kmap_coherent(struct page *page, unsigned long addr); -extern void kunmap_coherent(struct page *page); +extern void kunmap_coherent(void); #endif /* _ASM_CACHEFLUSH_H */ diff --git a/include/asm-mips/jmr3927/irq.h b/include/asm-mips/jmr3927/irq.h deleted file mode 100644 index e3e7ed38da6..00000000000 --- a/include/asm-mips/jmr3927/irq.h +++ /dev/null @@ -1,57 +0,0 @@ -/* - * linux/include/asm-mips/tx3927/irq.h - * - * This file is subject to the terms and conditions of the GNU General Public - * License. See the file "COPYING" in the main directory of this archive - * for more details. - * - * Copyright (C) 2001 Toshiba Corporation - */ -#ifndef __ASM_TX3927_IRQ_H -#define __ASM_TX3927_IRQ_H - -#ifndef __ASSEMBLY__ - -#include <asm/irq.h> - -struct tb_irq_space { - struct tb_irq_space* next; - int start_irqno; - int nr_irqs; - void (*mask_func)(int irq_nr, int space_id); - void (*unmask_func)(int irq_no, int space_id); - const char *name; - int space_id; - int can_share; -}; -extern struct tb_irq_space* tb_irq_spaces; - -static __inline__ void add_tb_irq_space(struct tb_irq_space* sp) -{ - sp->next = tb_irq_spaces; - tb_irq_spaces = sp; -} - - -struct pt_regs; -extern void -toshibaboards_spurious(struct pt_regs *regs, int irq); -extern void -toshibaboards_irqdispatch(struct pt_regs *regs, int irq); - -extern struct irqaction * -toshibaboards_get_irq_action(int irq); -extern int -toshibaboards_setup_irq(int irq, struct irqaction * new); - - -extern int (*toshibaboards_gen_iack)(void); - -#endif /* !__ASSEMBLY__ */ - -#define NR_ISA_IRQS 16 -#define TB_IRQ_IS_ISA(irq) \ - (0 <= (irq) && (irq) < NR_ISA_IRQS) -#define TB_IRQ_TO_ISA_IRQ(irq) (irq) - -#endif /* __ASM_TX3927_IRQ_H */ diff --git a/include/asm-mips/jmr3927/jmr3927.h b/include/asm-mips/jmr3927/jmr3927.h index c50e68ffa3a..958e29706e2 100644 --- a/include/asm-mips/jmr3927/jmr3927.h +++ b/include/asm-mips/jmr3927/jmr3927.h @@ -1,5 +1,5 @@ /* - * Defines for the TJSYS JMR-TX3927/JMI-3927IO2/JMY-1394IF. + * Defines for the TJSYS JMR-TX3927 * * This file is subject to the terms and conditions of the GNU General Public * License. See the file "COPYING" in the main directory of this archive @@ -12,10 +12,7 @@ #include <asm/jmr3927/tx3927.h> #include <asm/addrspace.h> -#include <asm/jmr3927/irq.h> -#ifndef __ASSEMBLY__ #include <asm/system.h> -#endif /* CS */ #define JMR3927_ROMCE0 0x1fc00000 /* 4M */ @@ -35,28 +32,10 @@ #define JMR3927_SDRAM_SIZE 0x02000000 /* 32M */ #define JMR3927_PORT_BASE KSEG1 -/* select indirect initiator access per errata */ -#define JMR3927_INIT_INDIRECT_PCI -#define PCI_ISTAT_IDICC 0x1000 -#define PCI_IPCIBE_IBE_LONG 0 -#define PCI_IPCIBE_ICMD_IOREAD 2 -#define PCI_IPCIBE_ICMD_IOWRITE 3 -#define PCI_IPCIBE_ICMD_MEMREAD 6 -#define PCI_IPCIBE_ICMD_MEMWRITE 7 -#define PCI_IPCIBE_ICMD_SHIFT 4 - /* Address map (virtual address) */ #define JMR3927_ROM0_BASE (KSEG1 + JMR3927_ROMCE0) #define JMR3927_ROM1_BASE (KSEG1 + JMR3927_ROMCE1) #define JMR3927_IOC_BASE (KSEG1 + JMR3927_ROMCE2) -#define JMR3927_IOB_BASE (KSEG1 + JMR3927_ROMCE3) -#define JMR3927_ISAMEM_BASE (JMR3927_IOB_BASE) -#define JMR3927_ISAIO_BASE (JMR3927_IOB_BASE + 0x01000000) -#define JMR3927_ISAC_BASE (JMR3927_IOB_BASE + 0x02000000) -#define JMR3927_LCDVGA_REG_BASE (JMR3927_IOB_BASE + 0x03000000) -#define JMR3927_LCDVGA_MEM_BASE (JMR3927_IOB_BASE + 0x03800000) -#define JMR3927_JMY1394_BASE (KSEG1 + JMR3927_ROMCE5) -#define JMR3927_PREMIER3_BASE (JMR3927_JMY1394_BASE + 0x00100000) #define JMR3927_PCIMEM_BASE (KSEG1 + JMR3927_PCIMEM) #define JMR3927_PCIIO_BASE (KSEG1 + JMR3927_PCIIO) @@ -72,25 +51,14 @@ #define JMR3927_IOC_INTP_ADDR (JMR3927_IOC_BASE + 0x000b0000) #define JMR3927_IOC_RESET_ADDR (JMR3927_IOC_BASE + 0x000f0000) -#define JMR3927_ISAC_REV_ADDR (JMR3927_ISAC_BASE + 0x00000000) -#define JMR3927_ISAC_EINTS_ADDR (JMR3927_ISAC_BASE + 0x00200000) -#define JMR3927_ISAC_EINTM_ADDR (JMR3927_ISAC_BASE + 0x00300000) -#define JMR3927_ISAC_NMI_ADDR (JMR3927_ISAC_BASE + 0x00400000) -#define JMR3927_ISAC_LED_ADDR (JMR3927_ISAC_BASE + 0x00500000) -#define JMR3927_ISAC_INTP_ADDR (JMR3927_ISAC_BASE + 0x00800000) -#define JMR3927_ISAC_INTS1_ADDR (JMR3927_ISAC_BASE + 0x00900000) -#define JMR3927_ISAC_INTS2_ADDR (JMR3927_ISAC_BASE + 0x00a00000) -#define JMR3927_ISAC_INTM_ADDR (JMR3927_ISAC_BASE + 0x00b00000) - /* Flash ROM */ #define JMR3927_FLASH_BASE (JMR3927_ROM0_BASE) #define JMR3927_FLASH_SIZE 0x00400000 -/* bits for IOC_REV/IOC_BREV/ISAC_REV (high byte) */ +/* bits for IOC_REV/IOC_BREV (high byte) */ #define JMR3927_IDT_MASK 0xfc #define JMR3927_REV_MASK 0x03 #define JMR3927_IOC_IDT 0xe0 -#define JMR3927_ISAC_IDT 0x20 /* bits for IOC_INTS1/IOC_INTS2/IOC_INTM/IOC_INTP (high byte) */ #define JMR3927_IOC_INTB_PCIA 0 @@ -114,40 +82,6 @@ #define JMR3927_IOC_RESET_CPU 1 #define JMR3927_IOC_RESET_PCI 2 -/* bits for ISAC_EINTS/ISAC_EINTM (high byte) */ -#define JMR3927_ISAC_EINTB_IOCHK 2 -#define JMR3927_ISAC_EINTB_BWTH 4 -#define JMR3927_ISAC_EINTF_IOCHK (1 << JMR3927_ISAC_EINTB_IOCHK) -#define JMR3927_ISAC_EINTF_BWTH (1 << JMR3927_ISAC_EINTB_BWTH) - -/* bits for ISAC_LED (high byte) */ -#define JMR3927_ISAC_LED_ISALED 0x01 -#define JMR3927_ISAC_LED_USRLED 0x02 - -/* bits for ISAC_INTS/ISAC_INTM/ISAC_INTP (high byte) */ -#define JMR3927_ISAC_INTB_IRQ5 0 -#define JMR3927_ISAC_INTB_IRQKB 1 -#define JMR3927_ISAC_INTB_IRQMOUSE 2 -#define JMR3927_ISAC_INTB_IRQ4 3 -#define JMR3927_ISAC_INTB_IRQ12 4 -#define JMR3927_ISAC_INTB_IRQ3 5 -#define JMR3927_ISAC_INTB_IRQ10 6 -#define JMR3927_ISAC_INTB_ISAER 7 -#define JMR3927_ISAC_INTF_IRQ5 (1 << JMR3927_ISAC_INTB_IRQ5) -#define JMR3927_ISAC_INTF_IRQKB (1 << JMR3927_ISAC_INTB_IRQKB) -#define JMR3927_ISAC_INTF_IRQMOUSE (1 << JMR3927_ISAC_INTB_IRQMOUSE) -#define JMR3927_ISAC_INTF_IRQ4 (1 << JMR3927_ISAC_INTB_IRQ4) -#define JMR3927_ISAC_INTF_IRQ12 (1 << JMR3927_ISAC_INTB_IRQ12) -#define JMR3927_ISAC_INTF_IRQ3 (1 << JMR3927_ISAC_INTB_IRQ3) -#define JMR3927_ISAC_INTF_IRQ10 (1 << JMR3927_ISAC_INTB_IRQ10) -#define JMR3927_ISAC_INTF_ISAER (1 << JMR3927_ISAC_INTB_ISAER) - -#ifndef __ASSEMBLY__ - -#if 0 -#define jmr3927_ioc_reg_out(d, a) ((*(volatile unsigned short *)(a)) = (d) << 8) -#define jmr3927_ioc_reg_in(a) (((*(volatile unsigned short *)(a)) >> 8) & 0xff) -#else #if defined(__BIG_ENDIAN) #define jmr3927_ioc_reg_out(d, a) ((*(volatile unsigned char *)(a)) = (d)) #define jmr3927_ioc_reg_in(a) (*(volatile unsigned char *)(a)) @@ -157,31 +91,9 @@ #else #error "No Endian" #endif -#endif -#define jmr3927_isac_reg_out(d, a) ((*(volatile unsigned char *)(a)) = (d)) -#define jmr3927_isac_reg_in(a) (*(volatile unsigned char *)(a)) - -static inline int jmr3927_have_isac(void) -{ - unsigned char idt; - unsigned long flags; - unsigned long romcr3; - - local_irq_save(flags); - romcr3 = tx3927_romcptr->cr[3]; - tx3927_romcptr->cr[3] &= 0xffffefff; /* do not wait infinitely */ - idt = jmr3927_isac_reg_in(JMR3927_ISAC_REV_ADDR) & JMR3927_IDT_MASK; - tx3927_romcptr->cr[3] = romcr3; - local_irq_restore(flags); - - return idt == JMR3927_ISAC_IDT; -} -#define jmr3927_have_nvram() \ - ((jmr3927_ioc_reg_in(JMR3927_IOC_REV_ADDR) & JMR3927_IDT_MASK) == JMR3927_IOC_IDT) /* LED macro */ #define jmr3927_led_set(n/*0-16*/) jmr3927_ioc_reg_out(~(n), JMR3927_IOC_LED_ADDR) -#define jmr3927_io_led_set(n/*0-3*/) jmr3927_isac_reg_out((n), JMR3927_ISAC_LED_ADDR) #define jmr3927_led_and_set(n/*0-16*/) jmr3927_ioc_reg_out((~(n)) & jmr3927_ioc_reg_in(JMR3927_IOC_LED_ADDR), JMR3927_IOC_LED_ADDR) @@ -190,10 +102,6 @@ static inline int jmr3927_have_isac(void) #define jmr3927_dipsw2() ((tx3927_pioptr->din & (1 << 10)) == 0) #define jmr3927_dipsw3() ((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 2) == 0) #define jmr3927_dipsw4() ((jmr3927_ioc_reg_in(JMR3927_IOC_DIPSW_ADDR) & 1) == 0) -#define jmr3927_io_dipsw() (jmr3927_isac_reg_in(JMR3927_ISAC_LED_ADDR) >> 4) - - -#endif /* !__ASSEMBLY__ */ /* * IRQ mappings @@ -206,16 +114,10 @@ static inline int jmr3927_have_isac(void) */ #define JMR3927_NR_IRQ_IRC 16 /* On-Chip IRC */ #define JMR3927_NR_IRQ_IOC 8 /* PCI/MODEM/INT[6:7] */ -#define JMR3927_NR_IRQ_ISAC 8 /* ISA */ - -#define JMR3927_IRQ_IRC NR_ISA_IRQS +#define JMR3927_IRQ_IRC 16 #define JMR3927_IRQ_IOC (JMR3927_IRQ_IRC + JMR3927_NR_IRQ_IRC) -#define JMR3927_IRQ_ISAC (JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC) -#define JMR3927_IRQ_END (JMR3927_IRQ_ISAC + JMR3927_NR_IRQ_ISAC) -#define JMR3927_IRQ_IS_IRC(irq) (JMR3927_IRQ_IRC <= (irq) && (irq) < JMR3927_IRQ_IOC) -#define JMR3927_IRQ_IS_IOC(irq) (JMR3927_IRQ_IOC <= (irq) && (irq) < JMR3927_IRQ_ISAC) -#define JMR3927_IRQ_IS_ISAC(irq) (JMR3927_IRQ_ISAC <= (irq) && (irq) < JMR3927_IRQ_END) +#define JMR3927_IRQ_END (JMR3927_IRQ_IOC + JMR3927_NR_IRQ_IOC) #define JMR3927_IRQ_IRC_INT0 (JMR3927_IRQ_IRC + TX3927_IR_INT0) #define JMR3927_IRQ_IRC_INT1 (JMR3927_IRQ_IRC + TX3927_IR_INT1) @@ -240,37 +142,13 @@ static inline int jmr3927_have_isac(void) #define JMR3927_IRQ_IOC_INT6 (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT6) #define JMR3927_IRQ_IOC_INT7 (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_INT7) #define JMR3927_IRQ_IOC_SOFT (JMR3927_IRQ_IOC + JMR3927_IOC_INTB_SOFT) -#define JMR3927_IRQ_ISAC_IRQ5 (JMR3927_IRQ_ISAC + JMR3927_ISAC_INTB_IRQ5) -#define JMR3927_IRQ_ISAC_IRQKB (JMR3927_IRQ_ISAC + JMR3927_ISAC_INTB_IRQKB) -#define JMR3927_IRQ_ISAC_IRQMOUSE (JMR3927_IRQ_ISAC + JMR3927_ISAC_INTB_IRQMOUSE) -#define JMR3927_IRQ_ISAC_IRQ4 (JMR3927_IRQ_ISAC + JMR3927_ISAC_INTB_IRQ4) -#define JMR3927_IRQ_ISAC_IRQ12 (JMR3927_IRQ_ISAC + JMR3927_ISAC_INTB_IRQ12) -#define JMR3927_IRQ_ISAC_IRQ3 (JMR3927_IRQ_ISAC + JMR3927_ISAC_INTB_IRQ3) -#define JMR3927_IRQ_ISAC_IRQ10 (JMR3927_IRQ_ISAC + JMR3927_ISAC_INTB_IRQ10) -#define JMR3927_IRQ_ISAC_ISAER (JMR3927_IRQ_ISAC + JMR3927_ISAC_INTB_ISAER) -#if 0 /* auto detect */ -/* RTL8019AS 10M Ether (JMI-3927IO2:JPW2:1-2 Short) */ -#define JMR3927_IRQ_ETHER1 JMR3927_IRQ_IRC_INT0 -#endif /* IOC (PCI, MODEM) */ #define JMR3927_IRQ_IOCINT JMR3927_IRQ_IRC_INT1 -/* ISAC (ISA, PCMCIA, KEYBOARD, MOUSE) */ -#define JMR3927_IRQ_ISACINT JMR3927_IRQ_IRC_INT2 /* TC35815 100M Ether (JMR-TX3912:JPW4:2-3 Short) */ #define JMR3927_IRQ_ETHER0 JMR3927_IRQ_IRC_INT3 /* Clock Tick (10ms) */ #define JMR3927_IRQ_TICK JMR3927_IRQ_IRC_TMR0 -#define JMR3927_IRQ_IDE JMR3927_IRQ_ISAC_IRQ12 - -/* IEEE1394 (Note that this may conflicts with RTL8019AS 10M Ether...) */ -#define JMR3927_IRQ_PREMIER3 JMR3927_IRQ_IRC_INT0 - -/* I/O Ports */ -/* RTL8019AS 10M Ether */ -#define JMR3927_ETHER1_PORT (JMR3927_ISAIO_BASE - JMR3927_PORT_BASE + 0x280) -#define JMR3927_KBD_PORT (JMR3927_ISAIO_BASE - JMR3927_PORT_BASE + 0x00800060) -#define JMR3927_IDE_PORT (JMR3927_ISAIO_BASE - JMR3927_PORT_BASE + 0x001001f0) /* Clocks */ #define JMR3927_CORECLK 132710400 /* 132.7MHz */ diff --git a/include/asm-mips/jmr3927/tx3927.h b/include/asm-mips/jmr3927/tx3927.h index b3d67c75d9a..0b9073bfb75 100644 --- a/include/asm-mips/jmr3927/tx3927.h +++ b/include/asm-mips/jmr3927/tx3927.h @@ -22,8 +22,6 @@ #define TX3927_SIO_REG(ch) (0xfffef300 + (ch) * 0x100) #define TX3927_PIO_REG 0xfffef500 -#ifndef __ASSEMBLY__ - struct tx3927_sdramc_reg { volatile unsigned long cr[8]; volatile unsigned long tr[3]; @@ -164,8 +162,6 @@ struct tx3927_ccfg_reg { volatile unsigned long pdcr; }; -#endif /* !__ASSEMBLY__ */ - /* * SDRAMC */ @@ -348,8 +344,6 @@ struct tx3927_ccfg_reg { #define TX3927_PCFG_SELDMA_ALL 0x0000000f #define TX3927_PCFG_SELDMA(ch) (0x00000001<<(ch)) -#ifndef __ASSEMBLY__ - #define tx3927_sdramcptr ((struct tx3927_sdramc_reg *)TX3927_SDRAMC_REG) #define tx3927_romcptr ((struct tx3927_romc_reg *)TX3927_ROMC_REG) #define tx3927_dmaptr ((struct tx3927_dma_reg *)TX3927_DMA_REG) @@ -360,6 +354,4 @@ struct tx3927_ccfg_reg { #define tx3927_sioptr(ch) ((struct txx927_sio_reg *)TX3927_SIO_REG(ch)) #define tx3927_pioptr ((struct txx927_pio_reg *)TX3927_PIO_REG) -#endif /* !__ASSEMBLY__ */ - #endif /* __ASM_TX3927_H */ diff --git a/include/asm-mips/jmr3927/txx927.h b/include/asm-mips/jmr3927/txx927.h index 9d5792eab45..58a8ff6be81 100644 --- a/include/asm-mips/jmr3927/txx927.h +++ b/include/asm-mips/jmr3927/txx927.h @@ -10,8 +10,6 @@ #ifndef __ASM_TXX927_H #define __ASM_TXX927_H -#ifndef __ASSEMBLY__ - struct txx927_tmr_reg { volatile unsigned long tcr; volatile unsigned long tisr; @@ -52,9 +50,6 @@ struct txx927_pio_reg { volatile unsigned long maskext; }; -#endif /* !__ASSEMBLY__ */ - - /* * TMR */ diff --git a/include/asm-mips/paccess.h b/include/asm-mips/paccess.h index 147844ef103..8c08fa904b2 100644 --- a/include/asm-mips/paccess.h +++ b/include/asm-mips/paccess.h @@ -34,7 +34,7 @@ struct __large_pstruct { unsigned long buf[100]; }; #define __get_dbe(x,ptr,size) \ ({ \ long __gu_err; \ - __typeof(*(ptr)) __gu_val; \ + __typeof__(*(ptr)) __gu_val; \ unsigned long __gu_addr; \ __asm__("":"=r" (__gu_val)); \ __gu_addr = (unsigned long) (ptr); \ diff --git a/include/asm-mips/sgi/hpc3.h b/include/asm-mips/sgi/hpc3.h index fcec52bafb2..c4729f53191 100644 --- a/include/asm-mips/sgi/hpc3.h +++ b/include/asm-mips/sgi/hpc3.h @@ -206,7 +206,7 @@ struct hpc3_regs { #define HPC3_GIOMISC_ERTIME 0x1 /* Enable external timer real time. */ #define HPC3_GIOMISC_DENDIAN 0x2 /* dma descriptor endian, 1=lit 0=big */ - volatile u32 eeprom; /* EEPROM data reg. */ + u32 eeprom; /* EEPROM data reg. */ #define HPC3_EEPROM_EPROT 0x01 /* Protect register enable */ #define HPC3_EEPROM_CSEL 0x02 /* Chip select */ #define HPC3_EEPROM_ECLK 0x04 /* EEPROM clock */ diff --git a/include/asm-mips/sgi/ip22.h b/include/asm-mips/sgi/ip22.h index 6592f3bd199..f4981c4f16b 100644 --- a/include/asm-mips/sgi/ip22.h +++ b/include/asm-mips/sgi/ip22.h @@ -72,7 +72,7 @@ #define ip22_is_fullhouse() (sgioc->sysid & SGIOC_SYSID_FULLHOUSE) -extern unsigned short ip22_eeprom_read(volatile unsigned int *ctrl, int reg); +extern unsigned short ip22_eeprom_read(unsigned int *ctrl, int reg); extern unsigned short ip22_nvram_read(int reg); #endif diff --git a/include/asm-mips/sgi/mc.h b/include/asm-mips/sgi/mc.h index c52f7834c7c..1576c2394de 100644 --- a/include/asm-mips/sgi/mc.h +++ b/include/asm-mips/sgi/mc.h @@ -57,7 +57,7 @@ struct sgimc_regs { volatile u32 divider; /* Divider reg for RPSS */ u32 _unused5; - volatile u32 eeprom; /* EEPROM byte reg for r4k */ + u32 eeprom; /* EEPROM byte reg for r4k */ #define SGIMC_EEPROM_PRE 0x00000001 /* eeprom chip PRE pin assertion */ #define SGIMC_EEPROM_CSEL 0x00000002 /* Active high, eeprom chip select */ #define SGIMC_EEPROM_SECLOCK 0x00000004 /* EEPROM serial clock */ diff --git a/include/asm-mips/sibyte/bcm1480_int.h b/include/asm-mips/sibyte/bcm1480_int.h index 42d4cf00efd..c0d5206020f 100644 --- a/include/asm-mips/sibyte/bcm1480_int.h +++ b/include/asm-mips/sibyte/bcm1480_int.h @@ -157,6 +157,7 @@ * Mask values for each interrupt */ +#define _BCM1480_INT_MASK(w,n) _SB_MAKEMASK(w,((n) & 0x3F)) #define _BCM1480_INT_MASK1(n) _SB_MAKEMASK1(((n) & 0x3F)) #define _BCM1480_INT_OFFSET(n) (((n) & 0x40) << 6) @@ -195,6 +196,7 @@ #define M_BCM1480_INT_PMI_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMI_HIGH) #define M_BCM1480_INT_PMO_LOW _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_LOW) #define M_BCM1480_INT_PMO_HIGH _BCM1480_INT_MASK1(K_BCM1480_INT_PMO_HIGH) +#define M_BCM1480_INT_MBOX_ALL _BCM1480_INT_MASK(8,K_BCM1480_INT_MBOX_0_0) #define M_BCM1480_INT_MBOX_0_0 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_0) #define M_BCM1480_INT_MBOX_0_1 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_1) #define M_BCM1480_INT_MBOX_0_2 _BCM1480_INT_MASK1(K_BCM1480_INT_MBOX_0_2) diff --git a/include/asm-mips/sibyte/bcm1480_mc.h b/include/asm-mips/sibyte/bcm1480_mc.h index 6bdc941afc9..a6a437451da 100644 --- a/include/asm-mips/sibyte/bcm1480_mc.h +++ b/include/asm-mips/sibyte/bcm1480_mc.h @@ -382,6 +382,10 @@ #define M_BCM1480_MC_CS6 _SB_MAKEMASK1(10) #define M_BCM1480_MC_CS7 _SB_MAKEMASK1(11) +#define M_BCM1480_MC_CS _SB_MAKEMASK(8,S_BCM1480_MC_CS0) +#define V_BCM1480_MC_CS(x) _SB_MAKEVALUE(x,S_BCM1480_MC_CS0) +#define G_BCM1480_MC_CS(x) _SB_GETVALUE(x,S_BCM1480_MC_CS0,M_BCM1480_MC_CS0) + #define M_BCM1480_MC_CMD_ACTIVE _SB_MAKEMASK1(16) /* @@ -412,6 +416,8 @@ #define K_BCM1480_MC_DRAM_TYPE_DDR2 2 #endif +#define K_BCM1480_MC_DRAM_TYPE_DDR2_PASS1 0 + #define V_BCM1480_MC_DRAM_TYPE_JEDEC V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_JEDEC) #define V_BCM1480_MC_DRAM_TYPE_FCRAM V_BCM1480_MC_DRAM_TYPE(K_BCM1480_MC_DRAM_TYPE_FCRAM) @@ -511,6 +517,22 @@ #define M_BCM1480_MC_WR_ODT6_CS6 _SB_MAKEMASK1(31) #define M_BCM1480_MC_CS_ODD_ODT_EN _SB_MAKEMASK1(32) + +#define S_BCM1480_MC_ODT0 0 +#define M_BCM1480_MC_ODT0 _SB_MAKEMASK(8,S_BCM1480_MC_ODT0) +#define V_BCM1480_MC_ODT0(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ODT0) + +#define S_BCM1480_MC_ODT2 8 +#define M_BCM1480_MC_ODT2 _SB_MAKEMASK(8,S_BCM1480_MC_ODT2) +#define V_BCM1480_MC_ODT2(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ODT2) + +#define S_BCM1480_MC_ODT4 16 +#define M_BCM1480_MC_ODT4 _SB_MAKEMASK(8,S_BCM1480_MC_ODT4) +#define V_BCM1480_MC_ODT4(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ODT4) + +#define S_BCM1480_MC_ODT6 24 +#define M_BCM1480_MC_ODT6 _SB_MAKEMASK(8,S_BCM1480_MC_ODT6) +#define V_BCM1480_MC_ODT6(x) _SB_MAKEVALUE(x,S_BCM1480_MC_ODT6) #endif /* @@ -588,11 +610,11 @@ #define M_BCM1480_MC_DQO_SHIFT _SB_MAKEMASK1(47) #endif -#define S_BCM1480_MC_DLL_DEFAULT 48 -#define M_BCM1480_MC_DLL_DEFAULT _SB_MAKEMASK(6,S_BCM1480_MC_DLL_DEFAULT) -#define V_BCM1480_MC_DLL_DEFAULT(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_DEFAULT) -#define G_BCM1480_MC_DLL_DEFAULT(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_DEFAULT,M_BCM1480_MC_DLL_DEFAULT) -#define V_BCM1480_MC_DLL_DEFAULT_DEFAULT V_BCM1480_MC_DLL_DEFAULT(0x10) +#define S_BCM1480_MC_DLL_DEFAULT 48 +#define M_BCM1480_MC_DLL_DEFAULT _SB_MAKEMASK(6,S_BCM1480_MC_DLL_DEFAULT) +#define V_BCM1480_MC_DLL_DEFAULT(x) _SB_MAKEVALUE(x,S_BCM1480_MC_DLL_DEFAULT) +#define G_BCM1480_MC_DLL_DEFAULT(x) _SB_GETVALUE(x,S_BCM1480_MC_DLL_DEFAULT,M_BCM1480_MC_DLL_DEFAULT) +#define V_BCM1480_MC_DLL_DEFAULT_DEFAULT V_BCM1480_MC_DLL_DEFAULT(0x10) #if SIBYTE_HDR_FEATURE(1480, PASS2) #define S_BCM1480_MC_DLL_REGCTRL 54 diff --git a/include/asm-mips/sibyte/bcm1480_regs.h b/include/asm-mips/sibyte/bcm1480_regs.h index c2dd2fe3047..bda391d3af8 100644 --- a/include/asm-mips/sibyte/bcm1480_regs.h +++ b/include/asm-mips/sibyte/bcm1480_regs.h @@ -230,6 +230,7 @@ #define A_BCM1480_DUART_IMRREG(chan) (A_BCM1480_DUART(chan) + R_BCM1480_DUART_IMRREG(chan)) #define A_BCM1480_DUART_ISRREG(chan) (A_BCM1480_DUART(chan) + R_BCM1480_DUART_ISRREG(chan)) +#define A_BCM1480_DUART_IN_PORT(chan) (A_BCM1480_DUART(chan) + R_DUART_INP_ORT) /* * These constants are the absolute addresses. @@ -404,6 +405,21 @@ #define R_BCM1480_IMR_ALIAS_MAILBOX_0 0x0000 /* 0x0x0 */ #define R_BCM1480_IMR_ALIAS_MAILBOX_0_SET 0x0008 /* 0x0x8 */ +/* + * these macros work together to build the address of a mailbox + * register, e.g., A_BCM1480_MAILBOX_REGISTER(0,R_BCM1480_IMR_MAILBOX_SET,2) + * for mbox_0_set_cpu2 returns 0x00100240C8 + */ +#define R_BCM1480_IMR_MAILBOX_CPU 0x00 +#define R_BCM1480_IMR_MAILBOX_SET 0x08 +#define R_BCM1480_IMR_MAILBOX_CLR 0x10 +#define R_BCM1480_IMR_MAILBOX_NUM_SPACING 0x20 +#define A_BCM1480_MAILBOX_REGISTER(num,reg,cpu) \ + (A_BCM1480_IMR_CPU0_BASE + \ + (num * R_BCM1480_IMR_MAILBOX_NUM_SPACING) + \ + (cpu * BCM1480_IMR_REGISTER_SPACING) + \ + (R_BCM1480_IMR_MAILBOX_0_CPU + reg)) + /* ********************************************************************* * System Performance Counter Registers (Section 4.7) ********************************************************************* */ @@ -428,6 +444,10 @@ #define A_BCM1480_SCD_PERF_CNT_6 0x0010020500 #define A_BCM1480_SCD_PERF_CNT_7 0x0010020508 +#define BCM1480_SCD_NUM_PERF_CNT 8 +#define BCM1480_SCD_PERF_CNT_SPACING 8 +#define A_BCM1480_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*BCM1480_SCD_PERF_CNT_SPACING)) + /* ********************************************************************* * System Bus Watcher Registers (Section 4.8) ********************************************************************* */ diff --git a/include/asm-mips/sibyte/bcm1480_scd.h b/include/asm-mips/sibyte/bcm1480_scd.h index 648bed96780..6111d6dcf11 100644 --- a/include/asm-mips/sibyte/bcm1480_scd.h +++ b/include/asm-mips/sibyte/bcm1480_scd.h @@ -10,7 +10,7 @@ * ********************************************************************* * - * Copyright 2000,2001,2002,2003 + * Copyright 2000,2001,2002,2003,2004,2005 * Broadcom Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or @@ -78,6 +78,7 @@ #define K_SYS_PART_BCM1280 0x1206 #define K_SYS_PART_BCM1455 0x1407 #define K_SYS_PART_BCM1255 0x1257 +#define K_SYS_PART_BCM1158 0x1156 /* * Manufacturing Information Register (Table 14) @@ -237,58 +238,42 @@ * System Performance Counter Configuration Register (Table 31) * Register: PERF_CNT_CFG_0 * - * Since the clear/enable bits are moved compared to the - * 1250 and there are more fields, this register will be BCM1480 specific. + * SPC_CFG_SRC[0-3] is the same as the 1250. + * SPC_CFG_SRC[4-7] only exist on the 1480 + * The clear/enable bits are in different locations on the 1250 and 1480. */ -#define S_BCM1480_SPC_CFG_SRC0 0 -#define M_BCM1480_SPC_CFG_SRC0 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC0) -#define V_BCM1480_SPC_CFG_SRC0(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC0) -#define G_BCM1480_SPC_CFG_SRC0(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC0,M_BCM1480_SPC_CFG_SRC0) - -#define S_BCM1480_SPC_CFG_SRC1 8 -#define M_BCM1480_SPC_CFG_SRC1 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC1) -#define V_BCM1480_SPC_CFG_SRC1(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC1) -#define G_BCM1480_SPC_CFG_SRC1(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC1,M_BCM1480_SPC_CFG_SRC1) - -#define S_BCM1480_SPC_CFG_SRC2 16 -#define M_BCM1480_SPC_CFG_SRC2 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC2) -#define V_BCM1480_SPC_CFG_SRC2(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC2) -#define G_BCM1480_SPC_CFG_SRC2(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC2,M_BCM1480_SPC_CFG_SRC2) - -#define S_BCM1480_SPC_CFG_SRC3 24 -#define M_BCM1480_SPC_CFG_SRC3 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC3) -#define V_BCM1480_SPC_CFG_SRC3(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC3) -#define G_BCM1480_SPC_CFG_SRC3(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC3,M_BCM1480_SPC_CFG_SRC3) - -#define S_BCM1480_SPC_CFG_SRC4 32 -#define M_BCM1480_SPC_CFG_SRC4 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC4) -#define V_BCM1480_SPC_CFG_SRC4(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC4) -#define G_BCM1480_SPC_CFG_SRC4(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC4,M_BCM1480_SPC_CFG_SRC4) - -#define S_BCM1480_SPC_CFG_SRC5 40 -#define M_BCM1480_SPC_CFG_SRC5 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC5) -#define V_BCM1480_SPC_CFG_SRC5(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC5) -#define G_BCM1480_SPC_CFG_SRC5(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC5,M_BCM1480_SPC_CFG_SRC5) - -#define S_BCM1480_SPC_CFG_SRC6 48 -#define M_BCM1480_SPC_CFG_SRC6 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC6) -#define V_BCM1480_SPC_CFG_SRC6(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC6) -#define G_BCM1480_SPC_CFG_SRC6(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC6,M_BCM1480_SPC_CFG_SRC6) - -#define S_BCM1480_SPC_CFG_SRC7 56 -#define M_BCM1480_SPC_CFG_SRC7 _SB_MAKEMASK(8,S_BCM1480_SPC_CFG_SRC7) -#define V_BCM1480_SPC_CFG_SRC7(x) _SB_MAKEVALUE(x,S_BCM1480_SPC_CFG_SRC7) -#define G_BCM1480_SPC_CFG_SRC7(x) _SB_GETVALUE(x,S_BCM1480_SPC_CFG_SRC7,M_BCM1480_SPC_CFG_SRC7) +#define S_SPC_CFG_SRC4 32 +#define M_SPC_CFG_SRC4 _SB_MAKEMASK(8,S_SPC_CFG_SRC4) +#define V_SPC_CFG_SRC4(x) _SB_MAKEVALUE(x,S_SPC_CFG_SRC4) +#define G_SPC_CFG_SRC4(x) _SB_GETVALUE(x,S_SPC_CFG_SRC4,M_SPC_CFG_SRC4) + +#define S_SPC_CFG_SRC5 40 +#define M_SPC_CFG_SRC5 _SB_MAKEMASK(8,S_SPC_CFG_SRC5) +#define V_SPC_CFG_SRC5(x) _SB_MAKEVALUE(x,S_SPC_CFG_SRC5) +#define G_SPC_CFG_SRC5(x) _SB_GETVALUE(x,S_SPC_CFG_SRC5,M_SPC_CFG_SRC5) + +#define S_SPC_CFG_SRC6 48 +#define M_SPC_CFG_SRC6 _SB_MAKEMASK(8,S_SPC_CFG_SRC6) +#define V_SPC_CFG_SRC6(x) _SB_MAKEVALUE(x,S_SPC_CFG_SRC6) +#define G_SPC_CFG_SRC6(x) _SB_GETVALUE(x,S_SPC_CFG_SRC6,M_SPC_CFG_SRC6) + +#define S_SPC_CFG_SRC7 56 +#define M_SPC_CFG_SRC7 _SB_MAKEMASK(8,S_SPC_CFG_SRC7) +#define V_SPC_CFG_SRC7(x) _SB_MAKEVALUE(x,S_SPC_CFG_SRC7) +#define G_SPC_CFG_SRC7(x) _SB_GETVALUE(x,S_SPC_CFG_SRC7,M_SPC_CFG_SRC7) /* * System Performance Counter Control Register (Table 32) * Register: PERF_CNT_CFG_1 * BCM1480 specific */ - -#define M_BCM1480_SPC_CFG_CLEAR _SB_MAKEMASK1(0) -#define M_BCM1480_SPC_CFG_ENABLE _SB_MAKEMASK1(1) +#define M_BCM1480_SPC_CFG_CLEAR _SB_MAKEMASK1(0) +#define M_BCM1480_SPC_CFG_ENABLE _SB_MAKEMASK1(1) +#if SIBYTE_HDR_FEATURE_CHIP(1480) +#define M_SPC_CFG_CLEAR M_BCM1480_SPC_CFG_CLEAR +#define M_SPC_CFG_ENABLE M_BCM1480_SPC_CFG_ENABLE +#endif /* * System Performance Counters (Table 33) @@ -405,20 +390,10 @@ * Trace Control Register (Table 49) * Register: TRACE_CFG * - * Bits 0..8 are the same as the BCM1250, rest are different. - * Entire register is redefined below. + * BCM1480 changes to this register (other than location of the CUR_ADDR field) + * are defined below. */ -#define M_BCM1480_SCD_TRACE_CFG_RESET _SB_MAKEMASK1(0) -#define M_BCM1480_SCD_TRACE_CFG_START_READ _SB_MAKEMASK1(1) -#define M_BCM1480_SCD_TRACE_CFG_START _SB_MAKEMASK1(2) -#define M_BCM1480_SCD_TRACE_CFG_STOP _SB_MAKEMASK1(3) -#define M_BCM1480_SCD_TRACE_CFG_FREEZE _SB_MAKEMASK1(4) -#define M_BCM1480_SCD_TRACE_CFG_FREEZE_FULL _SB_MAKEMASK1(5) -#define M_BCM1480_SCD_TRACE_CFG_DEBUG_FULL _SB_MAKEMASK1(6) -#define M_BCM1480_SCD_TRACE_CFG_FULL _SB_MAKEMASK1(7) -#define M_BCM1480_SCD_TRACE_CFG_FORCE_CNT _SB_MAKEMASK1(8) - #define S_BCM1480_SCD_TRACE_CFG_MODE 16 #define M_BCM1480_SCD_TRACE_CFG_MODE _SB_MAKEMASK(2,S_BCM1480_SCD_TRACE_CFG_MODE) #define V_BCM1480_SCD_TRACE_CFG_MODE(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_TRACE_CFG_MODE) @@ -428,9 +403,4 @@ #define K_BCM1480_SCD_TRACE_CFG_MODE_BYTEEN_INT 1 #define K_BCM1480_SCD_TRACE_CFG_MODE_FLOW_ID 2 -#define S_BCM1480_SCD_TRACE_CFG_CUR_ADDR 24 -#define M_BCM1480_SCD_TRACE_CFG_CUR_ADDR _SB_MAKEMASK(8,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR) -#define V_BCM1480_SCD_TRACE_CFG_CUR_ADDR(x) _SB_MAKEVALUE(x,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR) -#define G_BCM1480_SCD_TRACE_CFG_CUR_ADDR(x) _SB_GETVALUE(x,S_BCM1480_SCD_TRACE_CFG_CUR_ADDR,M_BCM1480_SCD_TRACE_CFG_CUR_ADDR) - #endif /* _BCM1480_SCD_H */ diff --git a/include/asm-mips/sibyte/board.h b/include/asm-mips/sibyte/board.h index 3dfe29ed42a..73bce901a37 100644 --- a/include/asm-mips/sibyte/board.h +++ b/include/asm-mips/sibyte/board.h @@ -1,5 +1,5 @@ /* - * Copyright (C) 2000, 2001, 2002, 2003 Broadcom Corporation + * Copyright (C) 2000,2001,2002,2003,2004 Broadcom Corporation * * This program is free software; you can redistribute it and/or * modify it under the terms of the GNU General Public License @@ -19,8 +19,8 @@ #ifndef _SIBYTE_BOARD_H #define _SIBYTE_BOARD_H - #if defined(CONFIG_SIBYTE_SWARM) || defined(CONFIG_SIBYTE_PTSWARM) || \ + defined(CONFIG_SIBYTE_PT1120) || defined(CONFIG_SIBYTE_PT1125) || \ defined(CONFIG_SIBYTE_CRHONE) || defined(CONFIG_SIBYTE_CRHINE) || \ defined(CONFIG_SIBYTE_LITTLESUR) #include <asm/sibyte/swarm.h> @@ -55,6 +55,16 @@ #define setleds(t0,t1,c0,c1,c2,c3) #endif /* LEDS_PHYS */ +#else + +void swarm_setup(void); + +#ifdef LEDS_PHYS +extern void setleds(char *str); +#else +#define setleds(s) do { } while (0) +#endif /* LEDS_PHYS */ + #endif /* __ASSEMBLY__ */ #endif /* _SIBYTE_BOARD_H */ diff --git a/include/asm-mips/sibyte/carmel.h b/include/asm-mips/sibyte/carmel.h index 57c53e62a37..11cad71323e 100644 --- a/include/asm-mips/sibyte/carmel.h +++ b/include/asm-mips/sibyte/carmel.h @@ -18,7 +18,6 @@ #ifndef __ASM_SIBYTE_CARMEL_H #define __ASM_SIBYTE_CARMEL_H - #include <asm/sibyte/sb1250.h> #include <asm/sibyte/sb1250_int.h> diff --git a/include/asm-mips/sibyte/sb1250_int.h b/include/asm-mips/sibyte/sb1250_int.h index 05c7b39f1b0..94e8299b0a2 100644 --- a/include/asm-mips/sibyte/sb1250_int.h +++ b/include/asm-mips/sibyte/sb1250_int.h @@ -45,8 +45,6 @@ * First, the interrupt numbers. */ -#if SIBYTE_HDR_FEATURE_1250_112x - #define K_INT_SOURCES 64 #define K_INT_WATCHDOG_TIMER_0 0 @@ -152,6 +150,7 @@ #define M_INT_MBOX_1 _SB_MAKEMASK1(K_INT_MBOX_1) #define M_INT_MBOX_2 _SB_MAKEMASK1(K_INT_MBOX_2) #define M_INT_MBOX_3 _SB_MAKEMASK1(K_INT_MBOX_3) +#define M_INT_MBOX_ALL _SB_MAKEMASK(4,K_INT_MBOX_0) #if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) #define M_INT_CYCLE_CP0_INT _SB_MAKEMASK1(K_INT_CYCLE_CP0_INT) #define M_INT_CYCLE_CP1_INT _SB_MAKEMASK1(K_INT_CYCLE_CP1_INT) @@ -247,5 +246,3 @@ #endif /* 1250/112x */ - -#endif diff --git a/include/asm-mips/sibyte/sb1250_mac.h b/include/asm-mips/sibyte/sb1250_mac.h index adfc688fa55..833c8b59d68 100644 --- a/include/asm-mips/sibyte/sb1250_mac.h +++ b/include/asm-mips/sibyte/sb1250_mac.h @@ -129,9 +129,9 @@ #define M_MAC_BYPASS_16 _SB_MAKEMASK1(42) #define M_MAC_BYPASS_FCS_CHK _SB_MAKEMASK1(43) -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define M_MAC_RX_CH_SEL_MSB _SB_MAKEMASK1(44) -#endif /* 1250 PASS2 || 112x PASS1 */ +#endif /* 1250 PASS2 || 112x PASS1 || 1480*/ #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define M_MAC_SPLIT_CH_SEL _SB_MAKEMASK1(45) @@ -223,9 +223,9 @@ /* XXX: Can't enable, as it has the same name as a pass2+ define below. */ /* #define M_MAC_TX_WR_THRSH _SB_MAKEMASK(6,S_MAC_TX_WR_THRSH) */ #endif /* up to 1250 PASS1 */ -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define M_MAC_TX_WR_THRSH _SB_MAKEMASK(7,S_MAC_TX_WR_THRSH) -#endif /* 1250 PASS2 || 112x PASS1 */ +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ #define V_MAC_TX_WR_THRSH(x) _SB_MAKEVALUE(x,S_MAC_TX_WR_THRSH) #define G_MAC_TX_WR_THRSH(x) _SB_GETVALUE(x,S_MAC_TX_WR_THRSH,M_MAC_TX_WR_THRSH) @@ -234,9 +234,9 @@ /* XXX: Can't enable, as it has the same name as a pass2+ define below. */ /* #define M_MAC_TX_RD_THRSH _SB_MAKEMASK(6,S_MAC_TX_RD_THRSH) */ #endif /* up to 1250 PASS1 */ -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define M_MAC_TX_RD_THRSH _SB_MAKEMASK(7,S_MAC_TX_RD_THRSH) -#endif /* 1250 PASS2 || 112x PASS1 */ +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ #define V_MAC_TX_RD_THRSH(x) _SB_MAKEVALUE(x,S_MAC_TX_RD_THRSH) #define G_MAC_TX_RD_THRSH(x) _SB_GETVALUE(x,S_MAC_TX_RD_THRSH,M_MAC_TX_RD_THRSH) @@ -260,12 +260,12 @@ #define V_MAC_RX_RL_THRSH(x) _SB_MAKEVALUE(x,S_MAC_RX_RL_THRSH) #define G_MAC_RX_RL_THRSH(x) _SB_GETVALUE(x,S_MAC_RX_RL_THRSH,M_MAC_RX_RL_THRSH) -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define S_MAC_ENC_FC_THRSH _SB_MAKE64(56) #define M_MAC_ENC_FC_THRSH _SB_MAKEMASK(6,S_MAC_ENC_FC_THRSH) #define V_MAC_ENC_FC_THRSH(x) _SB_MAKEVALUE(x,S_MAC_ENC_FC_THRSH) #define G_MAC_ENC_FC_THRSH(x) _SB_GETVALUE(x,S_MAC_ENC_FC_THRSH,M_MAC_ENC_FC_THRSH) -#endif /* 1250 PASS2 || 112x PASS1 */ +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ /* * MAC Frame Configuration Registers (Table 9-15) @@ -462,9 +462,9 @@ #define M_MAC_LTCOL_ERR _SB_MAKEMASK1(44) #define M_MAC_EXCOL_ERR _SB_MAKEMASK1(45) #define M_MAC_CNTR_OVRFL_ERR _SB_MAKEMASK1(46) -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define M_MAC_SPLIT_EN _SB_MAKEMASK1(47) /* interrupt mask only */ -#endif /* 1250 PASS2 || 112x PASS1 */ +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ #define S_MAC_COUNTER_ADDR _SB_MAKE64(47) #define M_MAC_COUNTER_ADDR _SB_MAKEMASK(5,S_MAC_COUNTER_ADDR) @@ -598,9 +598,9 @@ #define M_MAC_MCAST_INV _SB_MAKEMASK1(4) #define M_MAC_BCAST_EN _SB_MAKEMASK1(5) #define M_MAC_DIRECT_INV _SB_MAKEMASK1(6) -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define M_MAC_ALLMCAST_EN _SB_MAKEMASK1(7) -#endif /* 1250 PASS2 || 112x PASS1 */ +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ #define S_MAC_IPHDR_OFFSET _SB_MAKE64(8) #define M_MAC_IPHDR_OFFSET _SB_MAKEMASK(8,S_MAC_IPHDR_OFFSET) diff --git a/include/asm-mips/sibyte/sb1250_mc.h b/include/asm-mips/sibyte/sb1250_mc.h index 26e421498c9..4fe848ffbc3 100644 --- a/include/asm-mips/sibyte/sb1250_mc.h +++ b/include/asm-mips/sibyte/sb1250_mc.h @@ -295,7 +295,7 @@ #if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) #define M_MC_PRE_ON_A8 _SB_MAKEMASK1(36) -#define M_MC_RAM_WITH_A13 _SB_MAKEMASK1(38) +#define M_MC_RAM_WITH_A13 _SB_MAKEMASK1(37) #endif /* 1250 PASS3 || 112x PASS1 */ diff --git a/include/asm-mips/sibyte/sb1250_regs.h b/include/asm-mips/sibyte/sb1250_regs.h index bab3a4580a3..da7c188993c 100644 --- a/include/asm-mips/sibyte/sb1250_regs.h +++ b/include/asm-mips/sibyte/sb1250_regs.h @@ -131,6 +131,7 @@ #endif + /* ********************************************************************* * PCI Interface Registers ********************************************************************* */ @@ -239,14 +240,14 @@ #define R_MAC_VLANTAG 0x00000110 #define R_MAC_FRAMECFG 0x00000118 #define R_MAC_EOPCNT 0x00000120 -#define R_MAC_FIFO_PTRS 0x00000130 +#define R_MAC_FIFO_PTRS 0x00000128 #define R_MAC_ADFILTER_CFG 0x00000200 #define R_MAC_ETHERNET_ADDR 0x00000208 #define R_MAC_PKT_TYPE 0x00000210 -#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) +#if SIBYTE_HDR_FEATURE(1250, PASS3) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define R_MAC_ADMASK0 0x00000218 #define R_MAC_ADMASK1 0x00000220 -#endif /* 1250 PASS3 || 112x PASS1 */ +#endif /* 1250 PASS3 || 112x PASS1 || 1480 */ #define R_MAC_HASH_BASE 0x00000240 #define R_MAC_ADDR_BASE 0x00000280 #define R_MAC_CHLO0_BASE 0x00000300 @@ -256,9 +257,9 @@ #define R_MAC_INT_MASK 0x00000410 #define R_MAC_TXD_CTL 0x00000420 #define R_MAC_MDIO 0x00000428 -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define R_MAC_STATUS1 0x00000430 -#endif /* 1250 PASS2 || 112x PASS1 */ +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ #define R_MAC_DEBUG_STATUS 0x00000448 #define MAC_HASH_COUNT 8 @@ -289,11 +290,11 @@ #define R_DUART_RX_HOLD 0x160 #define R_DUART_TX_HOLD 0x170 -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define R_DUART_FULL_CTL 0x140 #define R_DUART_OPCR_X 0x180 #define R_DUART_AUXCTL_X 0x190 -#endif /* 1250 PASS2 || 112x PASS1 */ +#endif /* 1250 PASS2 || 112x PASS1 || 1480*/ /* @@ -308,6 +309,7 @@ #define R_DUART_IMR_B 0x350 #define R_DUART_OUT_PORT 0x360 #define R_DUART_OPCR 0x370 +#define R_DUART_IN_PORT 0x380 #define R_DUART_SET_OPR 0x3B0 #define R_DUART_CLEAR_OPR 0x3C0 @@ -685,12 +687,17 @@ #define A_ADDR_TRAP_REG_DEBUG 0x0010020460 #endif /* 1250 PASS2 || 112x PASS1 || 1480 */ +#define ADDR_TRAP_SPACING 8 +#define NUM_ADDR_TRAP 4 +#define A_ADDR_TRAP_UP(n) (A_ADDR_TRAP_UP_0 + ((n) * ADDR_TRAP_SPACING)) +#define A_ADDR_TRAP_DOWN(n) (A_ADDR_TRAP_DOWN_0 + ((n) * ADDR_TRAP_SPACING)) +#define A_ADDR_TRAP_CFG(n) (A_ADDR_TRAP_CFG_0 + ((n) * ADDR_TRAP_SPACING)) + /* ********************************************************************* * System Interrupt Mapper Registers ********************************************************************* */ -#if SIBYTE_HDR_FEATURE_1250_112x #define A_IMR_CPU0_BASE 0x0010020000 #define A_IMR_CPU1_BASE 0x0010022000 #define IMR_REGISTER_SPACING 0x2000 @@ -700,6 +707,7 @@ #define A_IMR_REGISTER(cpu,reg) (A_IMR_MAPPER(cpu)+(reg)) #define R_IMR_INTERRUPT_DIAG 0x0010 +#define R_IMR_INTERRUPT_LDT 0x0018 #define R_IMR_INTERRUPT_MASK 0x0028 #define R_IMR_INTERRUPT_TRACE 0x0038 #define R_IMR_INTERRUPT_SOURCE_STATUS 0x0040 @@ -715,7 +723,14 @@ #define R_IMR_INTERRUPT_STATUS_COUNT 7 #define R_IMR_INTERRUPT_MAP_BASE 0x0200 #define R_IMR_INTERRUPT_MAP_COUNT 64 -#endif /* 1250/112x */ + +/* + * these macros work together to build the address of a mailbox + * register, e.g., A_MAILBOX_REGISTER(R_IMR_MAILBOX_SET_CPU,1) + * for mbox_0_set_cpu2 returns 0x00100240C8 + */ +#define A_MAILBOX_REGISTER(reg,cpu) \ + (A_IMR_CPU0_BASE + (cpu * IMR_REGISTER_SPACING) + reg) /* ********************************************************************* * System Performance Counter Registers @@ -727,6 +742,10 @@ #define A_SCD_PERF_CNT_2 0x00100204E0 #define A_SCD_PERF_CNT_3 0x00100204E8 +#define SCD_NUM_PERF_CNT 4 +#define SCD_PERF_CNT_SPACING 8 +#define A_SCD_PERF_CNT(n) (A_SCD_PERF_CNT_0+(n*SCD_PERF_CNT_SPACING)) + /* ********************************************************************* * System Bus Watcher Registers ********************************************************************* */ @@ -772,6 +791,15 @@ #define A_SCD_TRACE_SEQUENCE_6 0x0010020A90 #define A_SCD_TRACE_SEQUENCE_7 0x0010020A98 +#define TRACE_REGISTER_SPACING 8 +#define TRACE_NUM_REGISTERS 8 +#define A_SCD_TRACE_EVENT(n) (((n) & 4) ? \ + (A_SCD_TRACE_EVENT_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \ + (A_SCD_TRACE_EVENT_0 + ((n) * TRACE_REGISTER_SPACING))) +#define A_SCD_TRACE_SEQUENCE(n) (((n) & 4) ? \ + (A_SCD_TRACE_SEQUENCE_4 + (((n) & 3) * TRACE_REGISTER_SPACING)) : \ + (A_SCD_TRACE_SEQUENCE_0 + ((n) * TRACE_REGISTER_SPACING))) + /* ********************************************************************* * System Generic DMA Registers ********************************************************************* */ diff --git a/include/asm-mips/sibyte/sb1250_scd.h b/include/asm-mips/sibyte/sb1250_scd.h index b6a7d8f6ced..9ea3da367ab 100644 --- a/include/asm-mips/sibyte/sb1250_scd.h +++ b/include/asm-mips/sibyte/sb1250_scd.h @@ -10,7 +10,7 @@ * ********************************************************************* * - * Copyright 2000,2001,2002,2003 + * Copyright 2000,2001,2002,2003,2004,2005 * Broadcom Corporation. All rights reserved. * * This program is free software; you can redistribute it and/or @@ -150,7 +150,7 @@ * (For the assembler version, sysrev and dest may be the same register. * Also, it clobbers AT.) */ -#ifdef __ASSEMBLY__ +#ifdef __ASSEMBLER__ #define SYS_SOC_TYPE(dest, sysrev) \ .set push ; \ .set reorder ; \ @@ -214,6 +214,7 @@ #define G_SYS_YPOS(x) _SB_GETVALUE(x,S_SYS_YPOS,M_SYS_YPOS) #endif + /* * System Config Register (Table 4-2) * Register: SCD_SYSTEM_CFG @@ -360,13 +361,13 @@ */ #define V_SCD_TIMER_FREQ 1000000 -#define V_SCD_TIMER_WIDTH 23 #define S_SCD_TIMER_INIT 0 -#define M_SCD_TIMER_INIT _SB_MAKEMASK(V_SCD_TIMER_WIDTH,S_SCD_TIMER_INIT) +#define M_SCD_TIMER_INIT _SB_MAKEMASK(23,S_SCD_TIMER_INIT) #define V_SCD_TIMER_INIT(x) _SB_MAKEVALUE(x,S_SCD_TIMER_INIT) #define G_SCD_TIMER_INIT(x) _SB_GETVALUE(x,S_SCD_TIMER_INIT,M_SCD_TIMER_INIT) +#define V_SCD_TIMER_WIDTH 23 #define S_SCD_TIMER_CNT 0 #define M_SCD_TIMER_CNT _SB_MAKEMASK(V_SCD_TIMER_WIDTH,S_SCD_TIMER_CNT) #define V_SCD_TIMER_CNT(x) _SB_MAKEVALUE(x,S_SCD_TIMER_CNT) @@ -380,7 +381,6 @@ * System Performance Counters */ -#if SIBYTE_HDR_FEATURE_1250_112x #define S_SPC_CFG_SRC0 0 #define M_SPC_CFG_SRC0 _SB_MAKEMASK(8,S_SPC_CFG_SRC0) #define V_SPC_CFG_SRC0(x) _SB_MAKEVALUE(x,S_SPC_CFG_SRC0) @@ -401,6 +401,7 @@ #define V_SPC_CFG_SRC3(x) _SB_MAKEVALUE(x,S_SPC_CFG_SRC3) #define G_SPC_CFG_SRC3(x) _SB_GETVALUE(x,S_SPC_CFG_SRC3,M_SPC_CFG_SRC3) +#if SIBYTE_HDR_FEATURE_1250_112x #define M_SPC_CFG_CLEAR _SB_MAKEMASK1(32) #define M_SPC_CFG_ENABLE _SB_MAKEMASK1(33) #endif @@ -516,8 +517,6 @@ * Trace Buffer Config register */ -#if SIBYTE_HDR_FEATURE_1250_112x - #define M_SCD_TRACE_CFG_RESET _SB_MAKEMASK1(0) #define M_SCD_TRACE_CFG_START_READ _SB_MAKEMASK1(1) #define M_SCD_TRACE_CFG_START _SB_MAKEMASK1(2) @@ -526,17 +525,26 @@ #define M_SCD_TRACE_CFG_FREEZE_FULL _SB_MAKEMASK1(5) #define M_SCD_TRACE_CFG_DEBUG_FULL _SB_MAKEMASK1(6) #define M_SCD_TRACE_CFG_FULL _SB_MAKEMASK1(7) -#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) +#if SIBYTE_HDR_FEATURE(1250, PASS2) || SIBYTE_HDR_FEATURE(112x, PASS1) || SIBYTE_HDR_FEATURE_CHIP(1480) #define M_SCD_TRACE_CFG_FORCECNT _SB_MAKEMASK1(8) -#endif /* 1250 PASS2 || 112x PASS1 */ +#endif /* 1250 PASS2 || 112x PASS1 || 1480 */ +/* + * This field is the same on the 1250/112x and 1480, just located in + * a slightly different place in the register. + */ +#if SIBYTE_HDR_FEATURE_1250_112x #define S_SCD_TRACE_CFG_CUR_ADDR 10 +#else +#if SIBYTE_HDR_FEATURE_CHIP(1480) +#define S_SCD_TRACE_CFG_CUR_ADDR 24 +#endif /* 1480 */ +#endif /* 1250/112x */ + #define M_SCD_TRACE_CFG_CUR_ADDR _SB_MAKEMASK(8,S_SCD_TRACE_CFG_CUR_ADDR) #define V_SCD_TRACE_CFG_CUR_ADDR(x) _SB_MAKEVALUE(x,S_SCD_TRACE_CFG_CUR_ADDR) #define G_SCD_TRACE_CFG_CUR_ADDR(x) _SB_GETVALUE(x,S_SCD_TRACE_CFG_CUR_ADDR,M_SCD_TRACE_CFG_CUR_ADDR) -#endif /* 1250/112x */ - /* * Trace Event registers */ diff --git a/include/asm-mips/sibyte/swarm.h b/include/asm-mips/sibyte/swarm.h index 86db37e5ad8..540865fa7ec 100644 --- a/include/asm-mips/sibyte/swarm.h +++ b/include/asm-mips/sibyte/swarm.h @@ -32,6 +32,18 @@ #define SIBYTE_HAVE_IDE 1 #define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200" #endif +#ifdef CONFIG_SIBYTE_PT1120 +#define SIBYTE_BOARD_NAME "PT1120" +#define SIBYTE_HAVE_PCMCIA 1 +#define SIBYTE_HAVE_IDE 1 +#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200" +#endif +#ifdef CONFIG_SIBYTE_PT1125 +#define SIBYTE_BOARD_NAME "PT1125" +#define SIBYTE_HAVE_PCMCIA 1 +#define SIBYTE_HAVE_IDE 1 +#define SIBYTE_DEFAULT_CONSOLE "ttyS0,115200" +#endif #ifdef CONFIG_SIBYTE_LITTLESUR #define SIBYTE_BOARD_NAME "BCM91250C2 (LittleSur)" #define SIBYTE_HAVE_PCMCIA 0 diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug index 3f3e7403dca..79afd00bbe5 100644 --- a/lib/Kconfig.debug +++ b/lib/Kconfig.debug @@ -261,7 +261,7 @@ config LOCKDEP bool depends on DEBUG_KERNEL && TRACE_IRQFLAGS_SUPPORT && STACKTRACE_SUPPORT && LOCKDEP_SUPPORT select STACKTRACE - select FRAME_POINTER if !X86 + select FRAME_POINTER if !X86 && !MIPS select KALLSYMS select KALLSYMS_ALL |