aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/laptops/thinkpad-acpi.txt47
-rw-r--r--drivers/misc/thinkpad_acpi.c136
2 files changed, 176 insertions, 7 deletions
diff --git a/Documentation/laptops/thinkpad-acpi.txt b/Documentation/laptops/thinkpad-acpi.txt
index af1f2bcb6f6..73b80a7e9b0 100644
--- a/Documentation/laptops/thinkpad-acpi.txt
+++ b/Documentation/laptops/thinkpad-acpi.txt
@@ -876,28 +876,63 @@ The cmos command interface is prone to firmware split-brain problems, as
in newer ThinkPads it is just a compatibility layer. Do not use it, it is
exported just as a debug tool.
-LED control -- /proc/acpi/ibm/led
----------------------------------
+LED control
+-----------
-Some of the LED indicators can be controlled through this feature. The
-available commands are:
+procfs: /proc/acpi/ibm/led
+sysfs attributes: as per led class, see below for names
+
+Some of the LED indicators can be controlled through this feature. On
+some older ThinkPad models, it is possible to query the status of the
+LED indicators as well. Newer ThinkPads cannot query the real status
+of the LED indicators.
+
+procfs notes:
+
+The available commands are:
echo '<led number> on' >/proc/acpi/ibm/led
echo '<led number> off' >/proc/acpi/ibm/led
echo '<led number> blink' >/proc/acpi/ibm/led
The <led number> range is 0 to 7. The set of LEDs that can be
-controlled varies from model to model. Here is the mapping on the X40:
+controlled varies from model to model. Here is the common ThinkPad
+mapping:
0 - power
1 - battery (orange)
2 - battery (green)
- 3 - UltraBase
+ 3 - UltraBase/dock
4 - UltraBay
+ 5 - UltraBase battery slot
+ 6 - (unknown)
7 - standby
All of the above can be turned on and off and can be made to blink.
+sysfs notes:
+
+The ThinkPad LED sysfs interface is described in detail by the led class
+documentation, in Documentation/leds-class.txt.
+
+The leds are named (in LED ID order, from 0 to 7):
+"tpacpi::power", "tpacpi:orange:batt", "tpacpi:green:batt",
+"tpacpi::dock_active", "tpacpi::bay_active", "tpacpi::dock_batt",
+"tpacpi::unknown_led", "tpacpi::standby".
+
+Due to limitations in the sysfs led class, if the status of the LED
+indicators cannot be read due to an error, thinkpad-acpi will report it as
+a brightness of zero (same as LED off).
+
+If the thinkpad firmware doesn't support reading the current status,
+trying to read the current LED brightness will just return whatever
+brightness was last written to that attribute.
+
+These LEDs can blink using hardware acceleration. To request that a
+ThinkPad indicator LED should blink in hardware accelerated mode, use the
+"timer" trigger, and leave the delay_on and delay_off parameters set to
+zero (to request hardware acceleration autodetection).
+
ACPI sounds -- /proc/acpi/ibm/beep
----------------------------------
diff --git a/drivers/misc/thinkpad_acpi.c b/drivers/misc/thinkpad_acpi.c
index 38a119bd931..2ab3633f4e5 100644
--- a/drivers/misc/thinkpad_acpi.c
+++ b/drivers/misc/thinkpad_acpi.c
@@ -277,6 +277,7 @@ struct tpacpi_led_classdev {
struct led_classdev led_classdev;
struct work_struct work;
enum led_brightness new_brightness;
+ unsigned int led;
};
/****************************************************************************
@@ -3814,20 +3815,38 @@ TPACPI_HANDLE(led, ec, "SLED", /* 570 */
"LED", /* all others */
); /* R30, R31 */
+#define TPACPI_LED_NUMLEDS 8
+static struct tpacpi_led_classdev *tpacpi_leds;
+static enum led_status_t tpacpi_led_state_cache[TPACPI_LED_NUMLEDS];
+static const char const *tpacpi_led_names[TPACPI_LED_NUMLEDS] = {
+ /* there's a limit of 19 chars + NULL before 2.6.26 */
+ "tpacpi::power",
+ "tpacpi:orange:batt",
+ "tpacpi:green:batt",
+ "tpacpi::dock_active",
+ "tpacpi::bay_active",
+ "tpacpi::dock_batt",
+ "tpacpi::unknown_led",
+ "tpacpi::standby",
+};
+
static int led_get_status(unsigned int led)
{
int status;
+ enum led_status_t led_s;
switch (led_supported) {
case TPACPI_LED_570:
if (!acpi_evalf(ec_handle,
&status, "GLED", "dd", 1 << led))
return -EIO;
- return (status == 0)?
+ led_s = (status == 0)?
TPACPI_LED_OFF :
((status == 1)?
TPACPI_LED_ON :
TPACPI_LED_BLINK);
+ tpacpi_led_state_cache[led] = led_s;
+ return led_s;
default:
return -ENXIO;
}
@@ -3874,11 +3893,96 @@ static int led_set_status(unsigned int led, enum led_status_t ledstatus)
rc = -ENXIO;
}
+ if (!rc)
+ tpacpi_led_state_cache[led] = ledstatus;
+
return rc;
}
+static void led_sysfs_set_status(unsigned int led,
+ enum led_brightness brightness)
+{
+ led_set_status(led,
+ (brightness == LED_OFF) ?
+ TPACPI_LED_OFF :
+ (tpacpi_led_state_cache[led] == TPACPI_LED_BLINK) ?
+ TPACPI_LED_BLINK : TPACPI_LED_ON);
+}
+
+static void led_set_status_worker(struct work_struct *work)
+{
+ struct tpacpi_led_classdev *data =
+ container_of(work, struct tpacpi_led_classdev, work);
+
+ if (likely(tpacpi_lifecycle == TPACPI_LIFE_RUNNING))
+ led_sysfs_set_status(data->led, data->new_brightness);
+}
+
+static void led_sysfs_set(struct led_classdev *led_cdev,
+ enum led_brightness brightness)
+{
+ struct tpacpi_led_classdev *data = container_of(led_cdev,
+ struct tpacpi_led_classdev, led_classdev);
+
+ data->new_brightness = brightness;
+ schedule_work(&data->work);
+}
+
+static int led_sysfs_blink_set(struct led_classdev *led_cdev,
+ unsigned long *delay_on, unsigned long *delay_off)
+{
+ struct tpacpi_led_classdev *data = container_of(led_cdev,
+ struct tpacpi_led_classdev, led_classdev);
+
+ /* Can we choose the flash rate? */
+ if (*delay_on == 0 && *delay_off == 0) {
+ /* yes. set them to the hardware blink rate (1 Hz) */
+ *delay_on = 500; /* ms */
+ *delay_off = 500; /* ms */
+ } else if ((*delay_on != 500) || (*delay_off != 500))
+ return -EINVAL;
+
+ data->new_brightness = TPACPI_LED_BLINK;
+ schedule_work(&data->work);
+
+ return 0;
+}
+
+static enum led_brightness led_sysfs_get(struct led_classdev *led_cdev)
+{
+ int rc;
+
+ struct tpacpi_led_classdev *data = container_of(led_cdev,
+ struct tpacpi_led_classdev, led_classdev);
+
+ rc = led_get_status(data->led);
+
+ if (rc == TPACPI_LED_OFF || rc < 0)
+ rc = LED_OFF; /* no error handling in led class :( */
+ else
+ rc = LED_FULL;
+
+ return rc;
+}
+
+static void led_exit(void)
+{
+ unsigned int i;
+
+ for (i = 0; i < TPACPI_LED_NUMLEDS; i++) {
+ if (tpacpi_leds[i].led_classdev.name)
+ led_classdev_unregister(&tpacpi_leds[i].led_classdev);
+ }
+
+ kfree(tpacpi_leds);
+ tpacpi_leds = NULL;
+}
+
static int __init led_init(struct ibm_init_struct *iibm)
{
+ unsigned int i;
+ int rc;
+
vdbg_printk(TPACPI_DBG_INIT, "initializing LED subdriver\n");
TPACPI_ACPIHANDLE_INIT(led);
@@ -3899,6 +4003,35 @@ static int __init led_init(struct ibm_init_struct *iibm)
vdbg_printk(TPACPI_DBG_INIT, "LED commands are %s, mode %d\n",
str_supported(led_supported), led_supported);
+ tpacpi_leds = kzalloc(sizeof(*tpacpi_leds) * TPACPI_LED_NUMLEDS,
+ GFP_KERNEL);
+ if (!tpacpi_leds) {
+ printk(TPACPI_ERR "Out of memory for LED data\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < TPACPI_LED_NUMLEDS; i++) {
+ tpacpi_leds[i].led = i;
+
+ tpacpi_leds[i].led_classdev.brightness_set = &led_sysfs_set;
+ tpacpi_leds[i].led_classdev.blink_set = &led_sysfs_blink_set;
+ if (led_supported == TPACPI_LED_570)
+ tpacpi_leds[i].led_classdev.brightness_get =
+ &led_sysfs_get;
+
+ tpacpi_leds[i].led_classdev.name = tpacpi_led_names[i];
+
+ INIT_WORK(&tpacpi_leds[i].work, led_set_status_worker);
+
+ rc = led_classdev_register(&tpacpi_pdev->dev,
+ &tpacpi_leds[i].led_classdev);
+ if (rc < 0) {
+ tpacpi_leds[i].led_classdev.name = NULL;
+ led_exit();
+ return rc;
+ }
+ }
+
return (led_supported != TPACPI_LED_NONE)? 0 : 1;
}
@@ -3969,6 +4102,7 @@ static struct ibm_struct led_driver_data = {
.name = "led",
.read = led_read,
.write = led_write,
+ .exit = led_exit,
};
/*************************************************************************