aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--Documentation/powerpc/mpc52xx-device-tree-bindings.txt11
-rw-r--r--arch/powerpc/boot/dts/mpc8610_hpcd.dts23
-rw-r--r--arch/powerpc/configs/ps3_defconfig132
-rw-r--r--arch/powerpc/kernel/smp.c2
-rw-r--r--arch/powerpc/mm/slb.c27
-rw-r--r--arch/powerpc/platforms/ps3/interrupt.c6
-rw-r--r--arch/powerpc/sysdev/fsl_rio.c9
-rw-r--r--arch/powerpc/sysdev/fsl_soc.c4
-rw-r--r--arch/powerpc/sysdev/xilinx_intc.c2
-rw-r--r--drivers/char/xilinx_hwicap/xilinx_hwicap.c6
-rw-r--r--drivers/net/fec_mpc52xx.c97
-rw-r--r--drivers/net/fec_mpc52xx.h19
-rw-r--r--drivers/ps3/ps3-lpm.c1
-rw-r--r--drivers/ps3/ps3-sys-manager.c7
-rw-r--r--drivers/serial/mpc52xx_uart.c2
-rw-r--r--include/asm-powerpc/ps3.h3
-rw-r--r--include/linux/rio.h2
17 files changed, 231 insertions, 122 deletions
diff --git a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
index cda7a7dffa6..6f12f1c79c0 100644
--- a/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
+++ b/Documentation/powerpc/mpc52xx-device-tree-bindings.txt
@@ -237,6 +237,17 @@ Each GPIO controller node should have the empty property gpio-controller and
according to the bit numbers in the GPIO control registers. The second cell
is for flags which is currently unsused.
+8) FEC nodes
+The FEC node can specify one of the following properties to configure
+the MII link:
+"fsl,7-wire-mode" - An empty property that specifies the link uses 7-wire
+ mode instead of MII
+"current-speed" - Specifies that the MII should be configured for a fixed
+ speed. This property should contain two cells. The
+ first cell specifies the speed in Mbps and the second
+ should be '0' for half duplex and '1' for full duplex
+"phy-handle" - Contains a phandle to an Ethernet PHY.
+
IV - Extra Notes
================
diff --git a/arch/powerpc/boot/dts/mpc8610_hpcd.dts b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
index 1f2f1e0a557..bba234eb14a 100644
--- a/arch/powerpc/boot/dts/mpc8610_hpcd.dts
+++ b/arch/powerpc/boot/dts/mpc8610_hpcd.dts
@@ -21,6 +21,7 @@
serial1 = &serial1;
pci0 = &pci0;
pci1 = &pci1;
+ pci2 = &pci2;
};
cpus {
@@ -105,7 +106,7 @@
compatible = "ns16550";
reg = <0x4600 0x100>;
clock-frequency = <0>;
- interrupts = <28 2>;
+ interrupts = <42 2>;
interrupt-parent = <&mpic>;
};
@@ -322,4 +323,24 @@
};
};
};
+
+ pci2: pcie@e0009000 {
+ #address-cells = <3>;
+ #size-cells = <2>;
+ #interrupt-cells = <1>;
+ device_type = "pci";
+ compatible = "fsl,mpc8641-pcie";
+ reg = <0xe0009000 0x00001000>;
+ ranges = <0x02000000 0 0x90000000 0x90000000 0 0x10000000
+ 0x01000000 0 0x00000000 0xe2000000 0 0x00100000>;
+ bus-range = <0 255>;
+ interrupt-map-mask = <0xf800 0 0 7>;
+ interrupt-map = <0x0000 0 0 1 &mpic 4 1
+ 0x0000 0 0 2 &mpic 5 1
+ 0x0000 0 0 3 &mpic 6 1
+ 0x0000 0 0 4 &mpic 7 1>;
+ interrupt-parent = <&mpic>;
+ interrupts = <25 2>;
+ clock-frequency = <33333333>;
+ };
};
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index 7a64c564f6e..71d79e428d2 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.25-rc6
-# Thu Mar 20 11:07:04 2008
+# Linux kernel version: 2.6.25
+# Mon Apr 28 12:39:10 2008
#
CONFIG_PPC64=y
@@ -30,6 +30,9 @@ CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_GENERIC_HARDIRQS=y
CONFIG_HAVE_SETUP_PER_CPU_AREA=y
CONFIG_IRQ_PER_CPU=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
CONFIG_ARCH_HAS_ILOG2_U64=y
@@ -73,8 +76,6 @@ CONFIG_POSIX_MQUEUE=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
-# CONFIG_USER_SCHED is not set
-# CONFIG_CGROUP_SCHED is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -161,7 +162,6 @@ CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_PMAC is not set
# CONFIG_PPC_MAPLE is not set
# CONFIG_PPC_PASEMI is not set
-# CONFIG_PPC_CELLEB is not set
CONFIG_PPC_PS3=y
#
@@ -181,6 +181,7 @@ CONFIG_PS3_LPM=m
CONFIG_PPC_CELL=y
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PPC_IBM_CELL_BLADE is not set
+# CONFIG_PPC_CELLEB is not set
#
# Cell Broadband Engine options
@@ -205,9 +206,9 @@ CONFIG_SPU_BASE=y
#
# Kernel options
#
-# CONFIG_TICK_ONESHOT is not set
+CONFIG_TICK_ONESHOT=y
# CONFIG_NO_HZ is not set
-# CONFIG_HIGH_RES_TIMERS is not set
+CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
# CONFIG_HZ_100 is not set
CONFIG_HZ_250=y
@@ -221,7 +222,6 @@ CONFIG_PREEMPT_NONE=y
CONFIG_BINFMT_ELF=y
CONFIG_COMPAT_BINFMT_ELF=y
CONFIG_BINFMT_MISC=y
-CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_IOMMU_VMERGE is not set
CONFIG_IOMMU_HELPER=y
CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y
@@ -255,6 +255,7 @@ CONFIG_BOUNCE=y
CONFIG_ARCH_MEMORY_PROBE=y
# CONFIG_PPC_HAS_HASH_64K is not set
# CONFIG_PPC_64K_PAGES is not set
+CONFIG_FORCE_MAX_ZONEORDER=13
# CONFIG_SCHED_SMT is not set
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -272,7 +273,9 @@ CONFIG_GENERIC_ISA_DMA=y
# CONFIG_PCI_SYSCALL is not set
# CONFIG_ARCH_SUPPORTS_MSI is not set
# CONFIG_PCCARD is not set
+CONFIG_PAGE_OFFSET=0xc000000000000000
CONFIG_KERNEL_START=0xc000000000000000
+CONFIG_PHYSICAL_START=0x00000000
#
# Networking
@@ -292,7 +295,7 @@ CONFIG_XFRM=y
# CONFIG_XFRM_STATISTICS is not set
# CONFIG_NET_KEY is not set
CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
+CONFIG_IP_MULTICAST=y
# CONFIG_IP_ADVANCED_ROUTER is not set
CONFIG_IP_FIB_HASH=y
CONFIG_IP_PNP=y
@@ -301,6 +304,7 @@ CONFIG_IP_PNP_DHCP=y
# CONFIG_IP_PNP_RARP is not set
# CONFIG_NET_IPIP is not set
# CONFIG_NET_IPGRE is not set
+# CONFIG_IP_MROUTE is not set
# CONFIG_ARPD is not set
# CONFIG_SYN_COOKIES is not set
# CONFIG_INET_AH is not set
@@ -332,8 +336,10 @@ CONFIG_INET6_XFRM_MODE_TUNNEL=y
CONFIG_INET6_XFRM_MODE_BEET=y
# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
CONFIG_IPV6_SIT=y
+CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IPV6_TUNNEL is not set
# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
# CONFIG_NETWORK_SECMARK is not set
# CONFIG_NETFILTER is not set
# CONFIG_IP_DCCP is not set
@@ -392,8 +398,6 @@ CONFIG_IEEE80211=m
CONFIG_IEEE80211_CRYPT_WEP=m
CONFIG_IEEE80211_CRYPT_CCMP=m
CONFIG_IEEE80211_CRYPT_TKIP=m
-CONFIG_IEEE80211_SOFTMAC=m
-# CONFIG_IEEE80211_SOFTMAC_DEBUG is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -507,6 +511,7 @@ CONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
+# CONFIG_IWLWIFI_LEDS is not set
# CONFIG_HOSTAP is not set
#
@@ -578,6 +583,7 @@ CONFIG_INPUT_JOYSTICK=y
# CONFIG_JOYSTICK_SPACEBALL is not set
# CONFIG_JOYSTICK_STINGER is not set
# CONFIG_JOYSTICK_TWIDJOY is not set
+# CONFIG_JOYSTICK_ZHENHUA is not set
# CONFIG_JOYSTICK_JOYDUMP is not set
# CONFIG_JOYSTICK_XPAD is not set
# CONFIG_INPUT_TABLET is not set
@@ -641,6 +647,7 @@ CONFIG_SSB_POSSIBLE=y
# Multifunction device drivers
#
# CONFIG_MFD_SM501 is not set
+# CONFIG_HTC_PASIC3 is not set
#
# Multimedia devices
@@ -761,10 +768,6 @@ CONFIG_SND_PS3_DEFAULT_START_DELAY=2000
# CONFIG_SND_SOC is not set
#
-# SoC Audio support for SuperH
-#
-
-#
# ALSA SoC audio for Freescale SOCs
#
@@ -849,6 +852,7 @@ CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
#
@@ -893,10 +897,6 @@ CONFIG_USB_MON=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
-
-#
-# Userspace I/O
-#
# CONFIG_UIO is not set
#
@@ -986,7 +986,6 @@ CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
CONFIG_NFS_V4=y
-# CONFIG_NFS_DIRECTIO is not set
# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
@@ -1059,9 +1058,10 @@ CONFIG_NLS_ISO8859_1=y
# Library routines
#
CONFIG_BITREVERSE=y
+# CONFIG_GENERIC_FIND_FIRST_BIT is not set
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
-# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
@@ -1071,6 +1071,7 @@ CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_HAVE_LMB=y
#
# Kernel hacking
@@ -1078,6 +1079,7 @@ CONFIG_HAS_DMA=y
# CONFIG_PRINTK_TIME is not set
CONFIG_ENABLE_WARN_DEPRECATED=y
CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=2048
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
# CONFIG_DEBUG_FS is not set
@@ -1093,12 +1095,16 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_RT_MUTEX_TESTER is not set
CONFIG_DEBUG_SPINLOCK=y
CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
CONFIG_DEBUG_SPINLOCK_SLEEP=y
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
# CONFIG_DEBUG_KOBJECT is not set
CONFIG_DEBUG_BUGVERBOSE=y
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
CONFIG_DEBUG_LIST=y
# CONFIG_DEBUG_SG is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
@@ -1121,51 +1127,81 @@ CONFIG_IRQSTACKS=y
# CONFIG_SECURITY is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
CONFIG_CRYPTO_ALGAPI=y
CONFIG_CRYPTO_AEAD=m
CONFIG_CRYPTO_BLKCIPHER=y
-CONFIG_CRYPTO_SEQIV=m
CONFIG_CRYPTO_MANAGER=y
+CONFIG_CRYPTO_GF128MUL=m
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+CONFIG_CRYPTO_CCM=m
+CONFIG_CRYPTO_GCM=m
+CONFIG_CRYPTO_SEQIV=m
+
+#
+# Block modes
+#
+CONFIG_CRYPTO_CBC=y
+CONFIG_CRYPTO_CTR=m
+# CONFIG_CRYPTO_CTS is not set
+CONFIG_CRYPTO_ECB=m
+# CONFIG_CRYPTO_LRW is not set
+CONFIG_CRYPTO_PCBC=m
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
# CONFIG_CRYPTO_HMAC is not set
# CONFIG_CRYPTO_XCBC is not set
-# CONFIG_CRYPTO_NULL is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
# CONFIG_CRYPTO_MD4 is not set
CONFIG_CRYPTO_MD5=y
+CONFIG_CRYPTO_MICHAEL_MIC=m
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
-# CONFIG_CRYPTO_WP512 is not set
# CONFIG_CRYPTO_TGR192 is not set
-CONFIG_CRYPTO_GF128MUL=m
-CONFIG_CRYPTO_ECB=m
-CONFIG_CRYPTO_CBC=y
-CONFIG_CRYPTO_PCBC=m
-# CONFIG_CRYPTO_LRW is not set
-# CONFIG_CRYPTO_XTS is not set
-CONFIG_CRYPTO_CTR=m
-CONFIG_CRYPTO_GCM=m
-CONFIG_CRYPTO_CCM=m
-# CONFIG_CRYPTO_CRYPTD is not set
-CONFIG_CRYPTO_DES=y
-# CONFIG_CRYPTO_FCRYPT is not set
-# CONFIG_CRYPTO_BLOWFISH is not set
-# CONFIG_CRYPTO_TWOFISH is not set
-# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
CONFIG_CRYPTO_AES=m
+# CONFIG_CRYPTO_ANUBIS is not set
+CONFIG_CRYPTO_ARC4=m
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
# CONFIG_CRYPTO_CAST5 is not set
# CONFIG_CRYPTO_CAST6 is not set
-# CONFIG_CRYPTO_TEA is not set
-CONFIG_CRYPTO_ARC4=m
+CONFIG_CRYPTO_DES=y
+# CONFIG_CRYPTO_FCRYPT is not set
# CONFIG_CRYPTO_KHAZAD is not set
-# CONFIG_CRYPTO_ANUBIS is not set
-# CONFIG_CRYPTO_SEED is not set
CONFIG_CRYPTO_SALSA20=m
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
# CONFIG_CRYPTO_DEFLATE is not set
-CONFIG_CRYPTO_MICHAEL_MIC=m
-# CONFIG_CRYPTO_CRC32C is not set
-# CONFIG_CRYPTO_CAMELLIA is not set
-# CONFIG_CRYPTO_TEST is not set
-# CONFIG_CRYPTO_AUTHENC is not set
CONFIG_CRYPTO_LZO=m
CONFIG_CRYPTO_HW=y
# CONFIG_PPC_CLOCK is not set
+# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/kernel/smp.c b/arch/powerpc/kernel/smp.c
index be35ffae10f..1457aa0a08f 100644
--- a/arch/powerpc/kernel/smp.c
+++ b/arch/powerpc/kernel/smp.c
@@ -386,6 +386,8 @@ static void __init smp_create_idle(unsigned int cpu)
panic("failed fork for CPU %u: %li", cpu, PTR_ERR(p));
#ifdef CONFIG_PPC64
paca[cpu].__current = p;
+ paca[cpu].kstack = (unsigned long) task_thread_info(p)
+ + THREAD_SIZE - STACK_FRAME_OVERHEAD;
#endif
current_set[cpu] = task_thread_info(p);
task_thread_info(p)->cpu = cpu;
diff --git a/arch/powerpc/mm/slb.c b/arch/powerpc/mm/slb.c
index 906daeda59a..cf8705e32d6 100644
--- a/arch/powerpc/mm/slb.c
+++ b/arch/powerpc/mm/slb.c
@@ -30,7 +30,7 @@
#ifdef DEBUG
#define DBG(fmt...) udbg_printf(fmt)
#else
-#define DBG(fmt...)
+#define DBG pr_debug
#endif
extern void slb_allocate_realmode(unsigned long ea);
@@ -44,13 +44,13 @@ static void slb_allocate(unsigned long ea)
slb_allocate_realmode(ea);
}
+#define slb_esid_mask(ssize) \
+ (((ssize) == MMU_SEGSIZE_256M)? ESID_MASK: ESID_MASK_1T)
+
static inline unsigned long mk_esid_data(unsigned long ea, int ssize,
unsigned long slot)
{
- unsigned long mask;
-
- mask = (ssize == MMU_SEGSIZE_256M)? ESID_MASK: ESID_MASK_1T;
- return (ea & mask) | SLB_ESID_V | slot;
+ return (ea & slb_esid_mask(ssize)) | SLB_ESID_V | slot;
}
#define slb_vsid_shift(ssize) \
@@ -279,8 +279,8 @@ void slb_initialize(void)
patch_slb_encoding(slb_compare_rr_to_size,
mmu_slb_size);
- DBG("SLB: linear LLP = %04x\n", linear_llp);
- DBG("SLB: io LLP = %04x\n", io_llp);
+ DBG("SLB: linear LLP = %04lx\n", linear_llp);
+ DBG("SLB: io LLP = %04lx\n", io_llp);
}
get_paca()->stab_rr = SLB_NUM_BOLTED;
@@ -301,11 +301,16 @@ void slb_initialize(void)
create_shadowed_slbe(VMALLOC_START, mmu_kernel_ssize, vflags, 1);
+ /* For the boot cpu, we're running on the stack in init_thread_union,
+ * which is in the first segment of the linear mapping, and also
+ * get_paca()->kstack hasn't been initialized yet.
+ * For secondary cpus, we need to bolt the kernel stack entry now.
+ */
slb_shadow_clear(2);
+ if (raw_smp_processor_id() != boot_cpuid &&
+ (get_paca()->kstack & slb_esid_mask(mmu_kernel_ssize)) > PAGE_OFFSET)
+ create_shadowed_slbe(get_paca()->kstack,
+ mmu_kernel_ssize, lflags, 2);
- /* We don't bolt the stack for the time being - we're in boot,
- * so the stack is in the bolted segment. By the time it goes
- * elsewhere, we'll call _switch() which will bolt in the new
- * one. */
asm volatile("isync":::"memory");
}
diff --git a/arch/powerpc/platforms/ps3/interrupt.c b/arch/powerpc/platforms/ps3/interrupt.c
index a14e5cdc2fe..e59634f7af9 100644
--- a/arch/powerpc/platforms/ps3/interrupt.c
+++ b/arch/powerpc/platforms/ps3/interrupt.c
@@ -167,8 +167,8 @@ static struct irq_chip ps3_irq_chip = {
* ps3_private data.
*/
-int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
- unsigned int *virq)
+static int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
+ unsigned int *virq)
{
int result;
struct ps3_private *pd;
@@ -217,7 +217,7 @@ fail_create:
* Clears chip data and calls irq_dispose_mapping() for the virq.
*/
-int ps3_virq_destroy(unsigned int virq)
+static int ps3_virq_destroy(unsigned int virq)
{
const struct ps3_private *pd = get_irq_chip_data(virq);
diff --git a/arch/powerpc/sysdev/fsl_rio.c b/arch/powerpc/sysdev/fsl_rio.c
index 3d920376f58..a0fa4ebb39c 100644
--- a/arch/powerpc/sysdev/fsl_rio.c
+++ b/arch/powerpc/sysdev/fsl_rio.c
@@ -176,6 +176,7 @@ struct rio_priv {
/**
* fsl_rio_doorbell_send - Send a MPC85xx doorbell message
+ * @mport: RapidIO master port info
* @index: ID of RapidIO interface
* @destid: Destination ID of target device
* @data: 16-bit info field of RapidIO doorbell message
@@ -211,6 +212,7 @@ static int fsl_rio_doorbell_send(struct rio_mport *mport,
/**
* fsl_local_config_read - Generate a MPC85xx local config space read
+ * @mport: RapidIO master port info
* @index: ID of RapdiIO interface
* @offset: Offset into configuration space
* @len: Length (in bytes) of the maintenance transaction
@@ -232,6 +234,7 @@ static int fsl_local_config_read(struct rio_mport *mport,
/**
* fsl_local_config_write - Generate a MPC85xx local config space write
+ * @mport: RapidIO master port info
* @index: ID of RapdiIO interface
* @offset: Offset into configuration space
* @len: Length (in bytes) of the maintenance transaction
@@ -254,6 +257,7 @@ static int fsl_local_config_write(struct rio_mport *mport,
/**
* fsl_rio_config_read - Generate a MPC85xx read maintenance transaction
+ * @mport: RapidIO master port info
* @index: ID of RapdiIO interface
* @destid: Destination ID of transaction
* @hopcount: Number of hops to target device
@@ -295,6 +299,7 @@ fsl_rio_config_read(struct rio_mport *mport, int index, u16 destid,
/**
* fsl_rio_config_write - Generate a MPC85xx write maintenance transaction
+ * @mport: RapidIO master port info
* @index: ID of RapdiIO interface
* @destid: Destination ID of transaction
* @hopcount: Number of hops to target device
@@ -985,8 +990,8 @@ static inline void fsl_rio_info(struct device *dev, u32 ccsr)
}
/**
- * fsl_rio_setup - Setup MPC85xx RapidIO interface
- * @fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
+ * fsl_rio_setup - Setup Freescale PowerPC RapidIO interface
+ * @dev: of_device pointer
*
* Initializes MPC85xx RapidIO hardware interface, configures
* master port with system-specific info, and registers the
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index 324c01b70dd..3a7054e2bb7 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -389,8 +389,8 @@ static int __init gfar_of_init(void)
}
gfar_data.phy_id = *id;
- snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%x",
- res.start);
+ snprintf(gfar_data.bus_id, MII_BUS_ID_SIZE, "%llx",
+ (unsigned long long)res.start);
of_node_put(phy);
of_node_put(mdio);
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index ba8eea2bcce..b7aefd0d45c 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -107,7 +107,7 @@ xilinx_intc_init(struct device_node *np)
}
regs = ioremap(res.start, 32);
- printk(KERN_INFO "Xilinx intc at 0x%08X mapped to 0x%p\n",
+ printk(KERN_INFO "Xilinx intc at 0x%08LX mapped to 0x%p\n",
res.start, regs);
/* Setup interrupt controller */
diff --git a/drivers/char/xilinx_hwicap/xilinx_hwicap.c b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
index dfe6907ae15..3edf1fc1296 100644
--- a/drivers/char/xilinx_hwicap/xilinx_hwicap.c
+++ b/drivers/char/xilinx_hwicap/xilinx_hwicap.c
@@ -623,8 +623,8 @@ static int __devinit hwicap_setup(struct device *dev, int id,
if (!request_mem_region(drvdata->mem_start,
drvdata->mem_size, DRIVER_NAME)) {
- dev_err(dev, "Couldn't lock memory region at %p\n",
- (void *)regs_res->start);
+ dev_err(dev, "Couldn't lock memory region at %Lx\n",
+ regs_res->start);
retval = -EBUSY;
goto failed1;
}
@@ -643,7 +643,7 @@ static int __devinit hwicap_setup(struct device *dev, int id,
mutex_init(&drvdata->sem);
drvdata->is_open = 0;
- dev_info(dev, "ioremap %lx to %p with size %x\n",
+ dev_info(dev, "ioremap %lx to %p with size %Lx\n",
(unsigned long int)drvdata->mem_start,
drvdata->base_address, drvdata->mem_size);
diff --git a/drivers/net/fec_mpc52xx.c b/drivers/net/fec_mpc52xx.c
index d21b7ab64bd..5f9c42e7a7f 100644
--- a/drivers/net/fec_mpc52xx.c
+++ b/drivers/net/fec_mpc52xx.c
@@ -43,6 +43,29 @@
#define DRIVER_NAME "mpc52xx-fec"
+#define FEC5200_PHYADDR_NONE (-1)
+#define FEC5200_PHYADDR_7WIRE (-2)
+
+/* Private driver data structure */
+struct mpc52xx_fec_priv {
+ int duplex;
+ int speed;
+ int r_irq;
+ int t_irq;
+ struct mpc52xx_fec __iomem *fec;
+ struct bcom_task *rx_dmatsk;
+ struct bcom_task *tx_dmatsk;
+ spinlock_t lock;
+ int msg_enable;
+
+ /* MDIO link details */
+ int phy_addr;
+ unsigned int phy_speed;
+ struct phy_device *phydev;
+ enum phy_state link;
+};
+
+
static irqreturn_t mpc52xx_fec_interrupt(int, void *);
static irqreturn_t mpc52xx_fec_rx_interrupt(int, void *);
static irqreturn_t mpc52xx_fec_tx_interrupt(int, void *);
@@ -223,7 +246,7 @@ static int mpc52xx_fec_phy_start(struct net_device *dev)
struct mpc52xx_fec_priv *priv = netdev_priv(dev);
int err;
- if (!priv->has_phy)
+ if (priv->phy_addr < 0)
return 0;
err = mpc52xx_fec_init_phy(dev);
@@ -243,7 +266,7 @@ static void mpc52xx_fec_phy_stop(struct net_device *dev)
{
struct mpc52xx_fec_priv *priv = netdev_priv(dev);
- if (!priv->has_phy)
+ if (!priv->phydev)
return;
phy_disconnect(priv->phydev);
@@ -255,7 +278,7 @@ static void mpc52xx_fec_phy_stop(struct net_device *dev)
static int mpc52xx_fec_phy_mii_ioctl(struct mpc52xx_fec_priv *priv,
struct mii_ioctl_data *mii_data, int cmd)
{
- if (!priv->has_phy)
+ if (!priv->phydev)
return -ENOTSUPP;
return phy_mii_ioctl(priv->phydev, mii_data, cmd);
@@ -265,7 +288,7 @@ static void mpc52xx_fec_phy_hw_init(struct mpc52xx_fec_priv *priv)
{
struct mpc52xx_fec __iomem *fec = priv->fec;
- if (!priv->has_phy)
+ if (priv->phydev)
return;
out_be32(&fec->mii_speed, priv->phy_speed);
@@ -704,7 +727,7 @@ static void mpc52xx_fec_start(struct net_device *dev)
rcntrl = FEC_RX_BUFFER_SIZE << 16; /* max frame length */
rcntrl |= FEC_RCNTRL_FCE;
- if (priv->has_phy)
+ if (priv->phy_addr != FEC5200_PHYADDR_7WIRE)
rcntrl |= FEC_RCNTRL_MII_MODE;
if (priv->duplex == DUPLEX_FULL)
@@ -864,7 +887,10 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
struct net_device *ndev;
struct mpc52xx_fec_priv *priv = NULL;
struct resource mem;
- const phandle *ph;
+ struct device_node *phy_node;
+ const phandle *phy_handle;
+ const u32 *prop;
+ int prop_size;
phys_addr_t rx_fifo;
phys_addr_t tx_fifo;
@@ -948,26 +974,37 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
mpc52xx_fec_get_paddr(ndev, ndev->dev_addr);
priv->msg_enable = netif_msg_init(debug, MPC52xx_MESSAGES_DEFAULT);
- priv->duplex = DUPLEX_FULL;
-
- /* is the phy present in device tree? */
- ph = of_get_property(op->node, "phy-handle", NULL);
- if (ph) {
- const unsigned int *prop;
- struct device_node *phy_dn;
- priv->has_phy = 1;
- phy_dn = of_find_node_by_phandle(*ph);
- prop = of_get_property(phy_dn, "reg", NULL);
- priv->phy_addr = *prop;
+ /*
+ * Link mode configuration
+ */
- of_node_put(phy_dn);
+ /* Start with safe defaults for link connection */
+ priv->phy_addr = FEC5200_PHYADDR_NONE;
+ priv->speed = 100;
+ priv->duplex = DUPLEX_HALF;
+ priv->phy_speed = ((mpc52xx_find_ipb_freq(op->node) >> 20) / 5) << 1;
+
+ /* the 7-wire property means don't use MII mode */
+ if (of_find_property(op->node, "fsl,7-wire-mode", NULL))
+ priv->phy_addr = FEC5200_PHYADDR_7WIRE;
+
+ /* The current speed preconfigures the speed of the MII link */
+ prop = of_get_property(op->node, "current-speed", &prop_size);
+ if (prop && (prop_size >= sizeof(u32) * 2)) {
+ priv->speed = prop[0];
+ priv->duplex = prop[1] ? DUPLEX_FULL : DUPLEX_HALF;
+ }
- /* Phy speed */
- priv->phy_speed = ((mpc52xx_find_ipb_freq(op->node) >> 20) / 5) << 1;
- } else {
- dev_info(&ndev->dev, "can't find \"phy-handle\" in device"
- " tree, using 7-wire mode\n");
+ /* If there is a phy handle, setup link to that phy */
+ phy_handle = of_get_property(op->node, "phy-handle", &prop_size);
+ if (phy_handle && (prop_size >= sizeof(phandle))) {
+ phy_node = of_find_node_by_phandle(*phy_handle);
+ prop = of_get_property(phy_node, "reg", &prop_size);
+ if (prop && (prop_size >= sizeof(u32)))
+ if ((*prop >= 0) && (*prop < PHY_MAX_ADDR))
+ priv->phy_addr = *prop;
+ of_node_put(phy_node);
}
/* Hardware init */
@@ -982,6 +1019,20 @@ mpc52xx_fec_probe(struct of_device *op, const struct of_device_id *match)
if (rv < 0)
goto probe_error;
+ /* Now report the link setup */
+ switch (priv->phy_addr) {
+ case FEC5200_PHYADDR_NONE:
+ dev_info(&ndev->dev, "Fixed speed MII link: %i%cD\n",
+ priv->speed, priv->duplex ? 'F' : 'H');
+ break;
+ case FEC5200_PHYADDR_7WIRE:
+ dev_info(&ndev->dev, "using 7-wire PHY mode\n");
+ break;
+ default:
+ dev_info(&ndev->dev, "Using PHY at MDIO address %i\n",
+ priv->phy_addr);
+ }
+
/* We're done ! */
dev_set_drvdata(&op->dev, ndev);
diff --git a/drivers/net/fec_mpc52xx.h b/drivers/net/fec_mpc52xx.h
index 8b1f75397b9..a227a525bdb 100644
--- a/drivers/net/fec_mpc52xx.h
+++ b/drivers/net/fec_mpc52xx.h
@@ -26,25 +26,6 @@
#define FEC_WATCHDOG_TIMEOUT ((400*HZ)/1000)
-struct mpc52xx_fec_priv {
- int duplex;
- int r_irq;
- int t_irq;
- struct mpc52xx_fec __iomem *fec;
- struct bcom_task *rx_dmatsk;
- struct bcom_task *tx_dmatsk;
- spinlock_t lock;
- int msg_enable;
-
- int has_phy;
- unsigned int phy_speed;
- unsigned int phy_addr;
- struct phy_device *phydev;
- enum phy_state link;
- int speed;
-};
-
-
/* ======================================================================== */
/* Hardware register sets & bits */
/* ======================================================================== */
diff --git a/drivers/ps3/ps3-lpm.c b/drivers/ps3/ps3-lpm.c
index 6c9592ce499..85edf945ab8 100644
--- a/drivers/ps3/ps3-lpm.c
+++ b/drivers/ps3/ps3-lpm.c
@@ -22,6 +22,7 @@
#include <linux/module.h>
#include <linux/interrupt.h>
#include <linux/uaccess.h>
+#include <asm/time.h>
#include <asm/ps3.h>
#include <asm/lv1call.h>
#include <asm/cell-pmu.h>
diff --git a/drivers/ps3/ps3-sys-manager.c b/drivers/ps3/ps3-sys-manager.c
index 7605453b74f..f17513dd9d4 100644
--- a/drivers/ps3/ps3-sys-manager.c
+++ b/drivers/ps3/ps3-sys-manager.c
@@ -184,10 +184,7 @@ enum ps3_sys_manager_next_op {
/**
* enum ps3_sys_manager_wake_source - Next-op wakeup source (bit position mask).
- * @PS3_SM_WAKE_DEFAULT: Disk insert, power button, eject button, IR
- * controller, and bluetooth controller.
- * @PS3_SM_WAKE_RTC:
- * @PS3_SM_WAKE_RTC_ERROR:
+ * @PS3_SM_WAKE_DEFAULT: Disk insert, power button, eject button.
* @PS3_SM_WAKE_W_O_L: Ether or wireless LAN.
* @PS3_SM_WAKE_P_O_R: Power on reset.
*
@@ -200,8 +197,6 @@ enum ps3_sys_manager_next_op {
enum ps3_sys_manager_wake_source {
/* version 3 */
PS3_SM_WAKE_DEFAULT = 0,
- PS3_SM_WAKE_RTC = 0x00000040,
- PS3_SM_WAKE_RTC_ERROR = 0x00000080,
PS3_SM_WAKE_W_O_L = 0x00000400,
PS3_SM_WAKE_P_O_R = 0x80000000,
};
diff --git a/drivers/serial/mpc52xx_uart.c b/drivers/serial/mpc52xx_uart.c
index 7a3625f52a0..efc971d9647 100644
--- a/drivers/serial/mpc52xx_uart.c
+++ b/drivers/serial/mpc52xx_uart.c
@@ -783,7 +783,9 @@ mpc52xx_uart_int_rx_chars(struct uart_port *port)
}
}
+ spin_unlock(&port->lock);
tty_flip_buffer_push(tty);
+ spin_lock(&port->lock);
return psc_ops->raw_rx_rdy(port);
}
diff --git a/include/asm-powerpc/ps3.h b/include/asm-powerpc/ps3.h
index 9e8ed6824e1..81ffe3b3c1c 100644
--- a/include/asm-powerpc/ps3.h
+++ b/include/asm-powerpc/ps3.h
@@ -178,9 +178,6 @@ enum ps3_cpu_binding {
PS3_BINDING_CPU_1 = 1,
};
-int ps3_virq_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
- unsigned int *virq);
-int ps3_virq_destroy(unsigned int virq);
int ps3_irq_plug_setup(enum ps3_cpu_binding cpu, unsigned long outlet,
unsigned int *virq);
int ps3_irq_plug_destroy(unsigned int virq);
diff --git a/include/linux/rio.h b/include/linux/rio.h
index c1c99c9643d..dc0c75556c6 100644
--- a/include/linux/rio.h
+++ b/include/linux/rio.h
@@ -161,6 +161,8 @@ enum rio_phy_type {
* @ops: configuration space functions
* @id: Port ID, unique among all ports
* @index: Port index, unique among all port interfaces of the same type
+ * @sys_size: RapidIO common transport system size
+ * @phy_type: RapidIO phy type
* @name: Port name string
* @priv: Master port private data
*/
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-30 17:45:50 +0000