diff options
| -rw-r--r-- | drivers/net/wireless/b43/phy_lp.c | 86 |
1 files changed, 85 insertions, 1 deletions
diff --git a/drivers/net/wireless/b43/phy_lp.c b/drivers/net/wireless/b43/phy_lp.c index 2bec791041f..296e209a8c1 100644 --- a/drivers/net/wireless/b43/phy_lp.c +++ b/drivers/net/wireless/b43/phy_lp.c @@ -605,6 +605,90 @@ static void lpphy_radio_init(struct b43_wldev *dev) } } +static void lpphy_set_rc_cap(struct b43_wldev *dev) +{ + u8 rc_cap = dev->phy.lp->rc_cap; + + b43_radio_write(dev, B2062_N_RXBB_CALIB2, max_t(u8, rc_cap-4, 0x80)); + b43_radio_write(dev, B2062_N_TX_CTL_A, ((rc_cap & 0x1F) >> 1) | 0x80); + b43_radio_write(dev, B2062_S_RXG_CNT16, ((rc_cap & 0x1F) >> 2) | 0x80); +} + +static void lpphy_rev0_1_rc_calib(struct b43_wldev *dev) +{ + //TODO and SPEC FIXME +} + +static void lpphy_rev2plus_rc_calib(struct b43_wldev *dev) +{ + struct ssb_bus *bus = dev->dev->bus; + u32 crystal_freq = bus->chipco.pmu.crystalfreq * 1000; + u8 tmp = b43_radio_read(dev, B2063_RX_BB_SP8) & 0xFF; + int i; + + b43_radio_write(dev, B2063_RX_BB_SP8, 0x0); + b43_radio_write(dev, B2063_RC_CALIB_CTL1, 0x7E); + b43_radio_mask(dev, B2063_PLL_SP1, 0xF7); + b43_radio_write(dev, B2063_RC_CALIB_CTL1, 0x7C); + b43_radio_write(dev, B2063_RC_CALIB_CTL2, 0x15); + b43_radio_write(dev, B2063_RC_CALIB_CTL3, 0x70); + b43_radio_write(dev, B2063_RC_CALIB_CTL4, 0x52); + b43_radio_write(dev, B2063_RC_CALIB_CTL5, 0x1); + b43_radio_write(dev, B2063_RC_CALIB_CTL1, 0x7D); + + for (i = 0; i < 10000; i++) { + if (b43_radio_read(dev, B2063_RC_CALIB_CTL6) & 0x2) + break; + msleep(1); + } + + if (!(b43_radio_read(dev, B2063_RC_CALIB_CTL6) & 0x2)) + b43_radio_write(dev, B2063_RX_BB_SP8, tmp); + + tmp = b43_radio_read(dev, B2063_TX_BB_SP3) & 0xFF; + + b43_radio_write(dev, B2063_TX_BB_SP3, 0x0); + b43_radio_write(dev, B2063_RC_CALIB_CTL1, 0x7E); + b43_radio_write(dev, B2063_RC_CALIB_CTL1, 0x7C); + b43_radio_write(dev, B2063_RC_CALIB_CTL2, 0x55); + b43_radio_write(dev, B2063_RC_CALIB_CTL3, 0x76); + + if (crystal_freq == 24000000) { + b43_radio_write(dev, B2063_RC_CALIB_CTL4, 0xFC); + b43_radio_write(dev, B2063_RC_CALIB_CTL5, 0x0); + } else { + b43_radio_write(dev, B2063_RC_CALIB_CTL4, 0x13); + b43_radio_write(dev, B2063_RC_CALIB_CTL5, 0x1); + } + + b43_radio_write(dev, B2063_PA_SP7, 0x7D); + + for (i = 0; i < 10000; i++) { + if (b43_radio_read(dev, B2063_RC_CALIB_CTL6) & 0x2) + break; + msleep(1); + } + + if (!(b43_radio_read(dev, B2063_RC_CALIB_CTL6) & 0x2)) + b43_radio_write(dev, B2063_TX_BB_SP3, tmp); + + b43_radio_write(dev, B2063_RC_CALIB_CTL1, 0x7E); +} + +static void lpphy_calibrate_rc(struct b43_wldev *dev) +{ + struct b43_phy_lp *lpphy = dev->phy.lp; + + if (dev->phy.rev >= 2) { + lpphy_rev2plus_rc_calib(dev); + } else if (!lpphy->rc_cap) { + if (b43_current_band(dev->wl) == IEEE80211_BAND_2GHZ) + lpphy_rev0_1_rc_calib(dev); + } else { + lpphy_set_rc_cap(dev); + } +} + /* Read the TX power control mode from hardware. */ static void lpphy_read_tx_pctl_mode_from_hardware(struct b43_wldev *dev) { @@ -780,7 +864,7 @@ static int b43_lpphy_op_init(struct b43_wldev *dev) lpphy_read_band_sprom(dev); //FIXME should this be in prepare_structs? lpphy_baseband_init(dev); lpphy_radio_init(dev); - //TODO calibrate RC + lpphy_calibrate_rc(dev); //TODO set channel lpphy_tx_pctl_init(dev); lpphy_calibration(dev); |