aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--arch/x86/Kconfig.cpu2
-rw-r--r--arch/x86/ia32/ia32entry.S25
-rw-r--r--arch/x86/kernel/asm-offsets_64.c2
-rw-r--r--arch/x86/kernel/entry_64.S23
-rw-r--r--arch/x86/kernel/tsc.c1
-rw-r--r--arch/x86/lib/Makefile4
-rw-r--r--arch/x86/lib/copy_user_64.S4
-rw-r--r--arch/x86/lib/delay.c (renamed from arch/x86/lib/delay_32.c)17
-rw-r--r--arch/x86/lib/delay_64.c85
-rw-r--r--arch/x86/lib/getuser.S (renamed from arch/x86/lib/getuser_64.S)87
-rw-r--r--arch/x86/lib/getuser_32.S78
-rw-r--r--arch/x86/lib/putuser.S (renamed from arch/x86/lib/putuser_32.S)73
-rw-r--r--arch/x86/lib/putuser_64.S106
-rw-r--r--include/asm-x86/asm.h9
-rw-r--r--include/asm-x86/delay.h4
-rw-r--r--include/asm-x86/uaccess.h448
-rw-r--r--include/asm-x86/uaccess_32.h422
-rw-r--r--include/asm-x86/uaccess_64.h260
18 files changed, 574 insertions, 1076 deletions
diff --git a/arch/x86/Kconfig.cpu b/arch/x86/Kconfig.cpu
index 3d22bb8175b..abff1b84ed5 100644
--- a/arch/x86/Kconfig.cpu
+++ b/arch/x86/Kconfig.cpu
@@ -344,7 +344,7 @@ config X86_F00F_BUG
config X86_WP_WORKS_OK
def_bool y
- depends on X86_32 && !M386
+ depends on !M386
config X86_INVLPG
def_bool y
diff --git a/arch/x86/ia32/ia32entry.S b/arch/x86/ia32/ia32entry.S
index 24e4d4928d6..20371d0635e 100644
--- a/arch/x86/ia32/ia32entry.S
+++ b/arch/x86/ia32/ia32entry.S
@@ -116,7 +116,7 @@ ENTRY(ia32_sysenter_target)
pushfq
CFI_ADJUST_CFA_OFFSET 8
/*CFI_REL_OFFSET rflags,0*/
- movl 8*3-THREAD_SIZE+threadinfo_sysenter_return(%rsp), %r10d
+ movl 8*3-THREAD_SIZE+TI_sysenter_return(%rsp), %r10d
CFI_REGISTER rip,r10
pushq $__USER32_CS
CFI_ADJUST_CFA_OFFSET 8
@@ -136,8 +136,9 @@ ENTRY(ia32_sysenter_target)
.quad 1b,ia32_badarg
.previous
GET_THREAD_INFO(%r10)
- orl $TS_COMPAT,threadinfo_status(%r10)
- testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%r10)
+ orl $TS_COMPAT,TI_status(%r10)
+ testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
+ TI_flags(%r10)
CFI_REMEMBER_STATE
jnz sysenter_tracesys
sysenter_do_call:
@@ -149,9 +150,9 @@ sysenter_do_call:
GET_THREAD_INFO(%r10)
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- testl $_TIF_ALLWORK_MASK,threadinfo_flags(%r10)
+ testl $_TIF_ALLWORK_MASK,TI_flags(%r10)
jnz int_ret_from_sys_call
- andl $~TS_COMPAT,threadinfo_status(%r10)
+ andl $~TS_COMPAT,TI_status(%r10)
/* clear IF, that popfq doesn't enable interrupts early */
andl $~0x200,EFLAGS-R11(%rsp)
movl RIP-R11(%rsp),%edx /* User %eip */
@@ -240,8 +241,9 @@ ENTRY(ia32_cstar_target)
.quad 1b,ia32_badarg
.previous
GET_THREAD_INFO(%r10)
- orl $TS_COMPAT,threadinfo_status(%r10)
- testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%r10)
+ orl $TS_COMPAT,TI_status(%r10)
+ testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
+ TI_flags(%r10)
CFI_REMEMBER_STATE
jnz cstar_tracesys
cstar_do_call:
@@ -253,9 +255,9 @@ cstar_do_call:
GET_THREAD_INFO(%r10)
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- testl $_TIF_ALLWORK_MASK,threadinfo_flags(%r10)
+ testl $_TIF_ALLWORK_MASK,TI_flags(%r10)
jnz int_ret_from_sys_call
- andl $~TS_COMPAT,threadinfo_status(%r10)
+ andl $~TS_COMPAT,TI_status(%r10)
RESTORE_ARGS 1,-ARG_SKIP,1,1,1
movl RIP-ARGOFFSET(%rsp),%ecx
CFI_REGISTER rip,rcx
@@ -333,8 +335,9 @@ ENTRY(ia32_syscall)
this could be a problem. */
SAVE_ARGS 0,0,1
GET_THREAD_INFO(%r10)
- orl $TS_COMPAT,threadinfo_status(%r10)
- testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%r10)
+ orl $TS_COMPAT,TI_status(%r10)
+ testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
+ TI_flags(%r10)
jnz ia32_tracesys
ia32_do_syscall:
cmpl $(IA32_NR_syscalls-1),%eax
diff --git a/arch/x86/kernel/asm-offsets_64.c b/arch/x86/kernel/asm-offsets_64.c
index 3295e7c08fe..bacf5deeec2 100644
--- a/arch/x86/kernel/asm-offsets_64.c
+++ b/arch/x86/kernel/asm-offsets_64.c
@@ -34,7 +34,7 @@ int main(void)
ENTRY(pid);
BLANK();
#undef ENTRY
-#define ENTRY(entry) DEFINE(threadinfo_ ## entry, offsetof(struct thread_info, entry))
+#define ENTRY(entry) DEFINE(TI_ ## entry, offsetof(struct thread_info, entry))
ENTRY(flags);
ENTRY(addr_limit);
ENTRY(preempt_count);
diff --git a/arch/x86/kernel/entry_64.S b/arch/x86/kernel/entry_64.S
index 07d69f26233..466b9284ed2 100644
--- a/arch/x86/kernel/entry_64.S
+++ b/arch/x86/kernel/entry_64.S
@@ -168,13 +168,13 @@ ENTRY(ret_from_fork)
CFI_ADJUST_CFA_OFFSET -4
call schedule_tail
GET_THREAD_INFO(%rcx)
- testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),threadinfo_flags(%rcx)
+ testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT),TI_flags(%rcx)
jnz rff_trace
rff_action:
RESTORE_REST
testl $3,CS-ARGOFFSET(%rsp) # from kernel_thread?
je int_ret_from_sys_call
- testl $_TIF_IA32,threadinfo_flags(%rcx)
+ testl $_TIF_IA32,TI_flags(%rcx)
jnz int_ret_from_sys_call
RESTORE_TOP_OF_STACK %rdi,ARGOFFSET
jmp ret_from_sys_call
@@ -243,7 +243,8 @@ ENTRY(system_call_after_swapgs)
movq %rcx,RIP-ARGOFFSET(%rsp)
CFI_REL_OFFSET rip,RIP-ARGOFFSET
GET_THREAD_INFO(%rcx)
- testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP),threadinfo_flags(%rcx)
+ testl $(_TIF_SYSCALL_TRACE|_TIF_SYSCALL_AUDIT|_TIF_SECCOMP), \
+ TI_flags(%rcx)
jnz tracesys
cmpq $__NR_syscall_max,%rax
ja badsys
@@ -262,7 +263,7 @@ sysret_check:
GET_THREAD_INFO(%rcx)
DISABLE_INTERRUPTS(CLBR_NONE)
TRACE_IRQS_OFF
- movl threadinfo_flags(%rcx),%edx
+ movl TI_flags(%rcx),%edx
andl %edi,%edx
jnz sysret_careful
CFI_REMEMBER_STATE
@@ -347,10 +348,10 @@ int_ret_from_sys_call:
int_with_check:
LOCKDEP_SYS_EXIT_IRQ
GET_THREAD_INFO(%rcx)
- movl threadinfo_flags(%rcx),%edx
+ movl TI_flags(%rcx),%edx
andl %edi,%edx
jnz int_careful
- andl $~TS_COMPAT,threadinfo_status(%rcx)
+ andl $~TS_COMPAT,TI_status(%rcx)
jmp retint_swapgs
/* Either reschedule or signal or syscall exit tracking needed. */
@@ -558,7 +559,7 @@ retint_with_reschedule:
movl $_TIF_WORK_MASK,%edi
retint_check:
LOCKDEP_SYS_EXIT_IRQ
- movl threadinfo_flags(%rcx),%edx
+ movl TI_flags(%rcx),%edx
andl %edi,%edx
CFI_REMEMBER_STATE
jnz retint_careful
@@ -654,9 +655,9 @@ retint_signal:
/* Returning to kernel space. Check if we need preemption */
/* rcx: threadinfo. interrupts off. */
ENTRY(retint_kernel)
- cmpl $0,threadinfo_preempt_count(%rcx)
+ cmpl $0,TI_preempt_count(%rcx)
jnz retint_restore_args
- bt $TIF_NEED_RESCHED,threadinfo_flags(%rcx)
+ bt $TIF_NEED_RESCHED,TI_flags(%rcx)
jnc retint_restore_args
bt $9,EFLAGS-ARGOFFSET(%rsp) /* interrupts off? */
jnc retint_restore_args
@@ -819,7 +820,7 @@ paranoid_restore\trace:
jmp irq_return
paranoid_userspace\trace:
GET_THREAD_INFO(%rcx)
- movl threadinfo_flags(%rcx),%ebx
+ movl TI_flags(%rcx),%ebx
andl $_TIF_WORK_MASK,%ebx
jz paranoid_swapgs\trace
movq %rsp,%rdi /* &pt_regs */
@@ -917,7 +918,7 @@ error_exit:
testl %eax,%eax
jne retint_kernel
LOCKDEP_SYS_EXIT_IRQ
- movl threadinfo_flags(%rcx),%edx
+ movl TI_flags(%rcx),%edx
movl $_TIF_WORK_MASK,%edi
andl %edi,%edx
jnz retint_careful
diff --git a/arch/x86/kernel/tsc.c b/arch/x86/kernel/tsc.c
index 3c36f92160c..4a775d00195 100644
--- a/arch/x86/kernel/tsc.c
+++ b/arch/x86/kernel/tsc.c
@@ -513,6 +513,7 @@ void __init tsc_init(void)
*/
for_each_possible_cpu(cpu)
set_cyc2ns_scale(cpu_khz, cpu);
+ use_tsc_delay();
if (tsc_disabled > 0)
return;
diff --git a/arch/x86/lib/Makefile b/arch/x86/lib/Makefile
index 76f60f52a88..83226e0a7ce 100644
--- a/arch/x86/lib/Makefile
+++ b/arch/x86/lib/Makefile
@@ -4,8 +4,8 @@
obj-$(CONFIG_SMP) := msr-on-cpu.o
-lib-y := delay_$(BITS).o
-lib-y += usercopy_$(BITS).o getuser_$(BITS).o putuser_$(BITS).o
+lib-y := delay.o
+lib-y += usercopy_$(BITS).o getuser.o putuser.o
lib-y += memcpy_$(BITS).o
ifeq ($(CONFIG_X86_32),y)
diff --git a/arch/x86/lib/copy_user_64.S b/arch/x86/lib/copy_user_64.S
index ee1c3f63515..7eaaf0123b4 100644
--- a/arch/x86/lib/copy_user_64.S
+++ b/arch/x86/lib/copy_user_64.S
@@ -40,7 +40,7 @@ ENTRY(copy_to_user)
movq %rdi,%rcx
addq %rdx,%rcx
jc bad_to_user
- cmpq threadinfo_addr_limit(%rax),%rcx
+ cmpq TI_addr_limit(%rax),%rcx
jae bad_to_user
xorl %eax,%eax /* clear zero flag */
ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
@@ -65,7 +65,7 @@ ENTRY(copy_from_user)
movq %rsi,%rcx
addq %rdx,%rcx
jc bad_from_user
- cmpq threadinfo_addr_limit(%rax),%rcx
+ cmpq TI_addr_limit(%rax),%rcx
jae bad_from_user
movl $1,%ecx /* set zero flag */
ALTERNATIVE_JUMP X86_FEATURE_REP_GOOD,copy_user_generic_unrolled,copy_user_generic_string
diff --git a/arch/x86/lib/delay_32.c b/arch/x86/lib/delay.c
index ef691316f8b..f4568605d7d 100644
--- a/arch/x86/lib/delay_32.c
+++ b/arch/x86/lib/delay.c
@@ -29,7 +29,7 @@
/* simple loop based delay: */
static void delay_loop(unsigned long loops)
{
- __asm__ __volatile__(
+ asm volatile(
" test %0,%0 \n"
" jz 3f \n"
" jmp 1f \n"
@@ -38,9 +38,9 @@ static void delay_loop(unsigned long loops)
"1: jmp 2f \n"
".align 16 \n"
- "2: decl %0 \n"
+ "2: dec %0 \n"
" jnz 2b \n"
- "3: decl %0 \n"
+ "3: dec %0 \n"
: /* we don't need output */
:"a" (loops)
@@ -98,7 +98,7 @@ void use_tsc_delay(void)
int __devinit read_current_timer(unsigned long *timer_val)
{
if (delay_fn == delay_tsc) {
- rdtscl(*timer_val);
+ rdtscll(*timer_val);
return 0;
}
return -1;
@@ -108,31 +108,30 @@ void __delay(unsigned long loops)
{
delay_fn(loops);
}
+EXPORT_SYMBOL(__delay);
inline void __const_udelay(unsigned long xloops)
{
int d0;
xloops *= 4;
- __asm__("mull %0"
+ asm("mull %%edx"
:"=d" (xloops), "=&a" (d0)
:"1" (xloops), "0"
(cpu_data(raw_smp_processor_id()).loops_per_jiffy * (HZ/4)));
__delay(++xloops);
}
+EXPORT_SYMBOL(__const_udelay);
void __udelay(unsigned long usecs)
{
__const_udelay(usecs * 0x000010c7); /* 2**32 / 1000000 (rounded up) */
}
+EXPORT_SYMBOL(__udelay);
void __ndelay(unsigned long nsecs)
{
__const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
}
-
-EXPORT_SYMBOL(__delay);
-EXPORT_SYMBOL(__const_udelay);
-EXPORT_SYMBOL(__udelay);
EXPORT_SYMBOL(__ndelay);
diff --git a/arch/x86/lib/delay_64.c b/arch/x86/lib/delay_64.c
deleted file mode 100644
index 4c441be9264..00000000000
--- a/arch/x86/lib/delay_64.c
+++ /dev/null
@@ -1,85 +0,0 @@
-/*
- * Precise Delay Loops for x86-64
- *
- * Copyright (C) 1993 Linus Torvalds
- * Copyright (C) 1997 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
- *
- * The __delay function must _NOT_ be inlined as its execution time
- * depends wildly on alignment on many x86 processors.
- */
-
-#include <linux/module.h>
-#include <linux/sched.h>
-#include <linux/timex.h>
-#include <linux/preempt.h>
-#include <linux/delay.h>
-#include <linux/init.h>
-
-#include <asm/delay.h>
-#include <asm/msr.h>
-
-#ifdef CONFIG_SMP
-#include <asm/smp.h>
-#endif
-
-int __devinit read_current_timer(unsigned long *timer_value)
-{
- rdtscll(*timer_value);
- return 0;
-}
-
-void __delay(unsigned long loops)
-{
- unsigned bclock, now;
- int cpu;
-
- preempt_disable();
- cpu = smp_processor_id();
- rdtscl(bclock);
- for (;;) {
- rdtscl(now);
- if ((now - bclock) >= loops)
- break;
-
- /* Allow RT tasks to run */
- preempt_enable();
- rep_nop();
- preempt_disable();
-
- /*
- * It is possible that we moved to another CPU, and
- * since TSC's are per-cpu we need to calculate
- * that. The delay must guarantee that we wait "at
- * least" the amount of time. Being moved to another
- * CPU could make the wait longer but we just need to
- * make sure we waited long enough. Rebalance the
- * counter for this CPU.
- */
- if (unlikely(cpu != smp_processor_id())) {
- loops -= (now - bclock);
- cpu = smp_processor_id();
- rdtscl(bclock);
- }
- }
- preempt_enable();
-}
-EXPORT_SYMBOL(__delay);
-
-inline void __const_udelay(unsigned long xloops)
-{
- __delay(((xloops * HZ *
- cpu_data(raw_smp_processor_id()).loops_per_jiffy) >> 32) + 1);
-}
-EXPORT_SYMBOL(__const_udelay);
-
-void __udelay(unsigned long usecs)
-{
- __const_udelay(usecs * 0x000010c7); /* 2**32 / 1000000 (rounded up) */
-}
-EXPORT_SYMBOL(__udelay);
-
-void __ndelay(unsigned long nsecs)
-{
- __const_udelay(nsecs * 0x00005); /* 2**32 / 1000000000 (rounded up) */
-}
-EXPORT_SYMBOL(__ndelay);
diff --git a/arch/x86/lib/getuser_64.S b/arch/x86/lib/getuser.S
index 5448876261f..ad374003742 100644
--- a/arch/x86/lib/getuser_64.S
+++ b/arch/x86/lib/getuser.S
@@ -3,6 +3,7 @@
*
* (C) Copyright 1998 Linus Torvalds
* (C) Copyright 2005 Andi Kleen
+ * (C) Copyright 2008 Glauber Costa
*
* These functions have a non-standard call interface
* to make them more efficient, especially as they
@@ -13,14 +14,13 @@
/*
* __get_user_X
*
- * Inputs: %rcx contains the address.
+ * Inputs: %[r|e]ax contains the address.
* The register is modified, but all changes are undone
* before returning because the C code doesn't know about it.
*
- * Outputs: %rax is error code (0 or -EFAULT)
- * %rdx contains zero-extended value
- *
- * %r8 is destroyed.
+ * Outputs: %[r|e]ax is error code (0 or -EFAULT)
+ * %[r|e]dx contains zero-extended value
+ *
*
* These functions should not modify any other registers,
* as they get called from within inline assembly.
@@ -32,78 +32,73 @@
#include <asm/errno.h>
#include <asm/asm-offsets.h>
#include <asm/thread_info.h>
+#include <asm/asm.h>
.text
ENTRY(__get_user_1)
CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- cmpq threadinfo_addr_limit(%r8),%rcx
+ GET_THREAD_INFO(%_ASM_DX)
+ cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
jae bad_get_user
-1: movzb (%rcx),%edx
- xorl %eax,%eax
+1: movzb (%_ASM_AX),%edx
+ xor %eax,%eax
ret
CFI_ENDPROC
ENDPROC(__get_user_1)
ENTRY(__get_user_2)
CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- addq $1,%rcx
- jc 20f
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae 20f
- decq %rcx
-2: movzwl (%rcx),%edx
- xorl %eax,%eax
+ add $1,%_ASM_AX
+ jc bad_get_user
+ GET_THREAD_INFO(%_ASM_DX)
+ cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
+ jae bad_get_user
+2: movzwl -1(%_ASM_AX),%edx
+ xor %eax,%eax
ret
-20: decq %rcx
- jmp bad_get_user
CFI_ENDPROC
ENDPROC(__get_user_2)
ENTRY(__get_user_4)
CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- addq $3,%rcx
- jc 30f
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae 30f
- subq $3,%rcx
-3: movl (%rcx),%edx
- xorl %eax,%eax
+ add $3,%_ASM_AX
+ jc bad_get_user
+ GET_THREAD_INFO(%_ASM_DX)
+ cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
+ jae bad_get_user
+3: mov -3(%_ASM_AX),%edx
+ xor %eax,%eax
ret
-30: subq $3,%rcx
- jmp bad_get_user
CFI_ENDPROC
ENDPROC(__get_user_4)
+#ifdef CONFIG_X86_64
ENTRY(__get_user_8)
CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- addq $7,%rcx
- jc 40f
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae 40f
- subq $7,%rcx
-4: movq (%rcx),%rdx
- xorl %eax,%eax
+ add $7,%_ASM_AX
+ jc bad_get_user
+ GET_THREAD_INFO(%_ASM_DX)
+ cmp TI_addr_limit(%_ASM_DX),%_ASM_AX
+ jae bad_get_user
+4: movq -7(%_ASM_AX),%_ASM_DX
+ xor %eax,%eax
ret
-40: subq $7,%rcx
- jmp bad_get_user
CFI_ENDPROC
ENDPROC(__get_user_8)
+#endif
bad_get_user:
CFI_STARTPROC
- xorl %edx,%edx
- movq $(-EFAULT),%rax
+ xor %edx,%edx
+ mov $(-EFAULT),%_ASM_AX
ret
CFI_ENDPROC
END(bad_get_user)
.section __ex_table,"a"
- .quad 1b,bad_get_user
- .quad 2b,bad_get_user
- .quad 3b,bad_get_user
- .quad 4b,bad_get_user
-.previous
+ _ASM_PTR 1b,bad_get_user
+ _ASM_PTR 2b,bad_get_user
+ _ASM_PTR 3b,bad_get_user
+#ifdef CONFIG_X86_64
+ _ASM_PTR 4b,bad_get_user
+#endif
diff --git a/arch/x86/lib/getuser_32.S b/arch/x86/lib/getuser_32.S
deleted file mode 100644
index 6d84b53f12a..00000000000
--- a/arch/x86/lib/getuser_32.S
+++ /dev/null
@@ -1,78 +0,0 @@
-/*
- * __get_user functions.
- *
- * (C) Copyright 1998 Linus Torvalds
- *
- * These functions have a non-standard call interface
- * to make them more efficient, especially as they
- * return an error value in addition to the "real"
- * return value.
- */
-#include <linux/linkage.h>
-#include <asm/dwarf2.h>
-#include <asm/thread_info.h>
-
-
-/*
- * __get_user_X
- *
- * Inputs: %eax contains the address
- *
- * Outputs: %eax is error code (0 or -EFAULT)
- * %edx contains zero-extended value
- *
- * These functions should not modify any other registers,
- * as they get called from within inline assembly.
- */
-
-.text
-ENTRY(__get_user_1)
- CFI_STARTPROC
- GET_THREAD_INFO(%edx)
- cmpl TI_addr_limit(%edx),%eax
- jae bad_get_user
-1: movzbl (%eax),%edx
- xorl %eax,%eax
- ret
- CFI_ENDPROC
-ENDPROC(__get_user_1)
-
-ENTRY(__get_user_2)
- CFI_STARTPROC
- addl $1,%eax
- jc bad_get_user
- GET_THREAD_INFO(%edx)
- cmpl TI_addr_limit(%edx),%eax
- jae bad_get_user
-2: movzwl -1(%eax),%edx
- xorl %eax,%eax
- ret
- CFI_ENDPROC
-ENDPROC(__get_user_2)
-
-ENTRY(__get_user_4)
- CFI_STARTPROC
- addl $3,%eax
- jc bad_get_user
- GET_THREAD_INFO(%edx)
- cmpl TI_addr_limit(%edx),%eax
- jae bad_get_user
-3: movl -3(%eax),%edx
- xorl %eax,%eax
- ret
- CFI_ENDPROC
-ENDPROC(__get_user_4)
-
-bad_get_user:
- CFI_STARTPROC
- xorl %edx,%edx
- movl $-14,%eax
- ret
- CFI_ENDPROC
-END(bad_get_user)
-
-.section __ex_table,"a"
- .long 1b,bad_get_user
- .long 2b,bad_get_user
- .long 3b,bad_get_user
-.previous
diff --git a/arch/x86/lib/putuser_32.S b/arch/x86/lib/putuser.S
index f58fba109d1..36b0d15ae6e 100644
--- a/arch/x86/lib/putuser_32.S
+++ b/arch/x86/lib/putuser.S
@@ -2,6 +2,8 @@
* __put_user functions.
*
* (C) Copyright 2005 Linus Torvalds
+ * (C) Copyright 2005 Andi Kleen
+ * (C) Copyright 2008 Glauber Costa
*
* These functions have a non-standard call interface
* to make them more efficient, especially as they
@@ -11,6 +13,8 @@
#include <linux/linkage.h>
#include <asm/dwarf2.h>
#include <asm/thread_info.h>
+#include <asm/errno.h>
+#include <asm/asm.h>
/*
@@ -26,73 +30,68 @@
*/
#define ENTER CFI_STARTPROC ; \
- pushl %ebx ; \
- CFI_ADJUST_CFA_OFFSET 4 ; \
- CFI_REL_OFFSET ebx, 0 ; \
- GET_THREAD_INFO(%ebx)
-#define EXIT popl %ebx ; \
- CFI_ADJUST_CFA_OFFSET -4 ; \
- CFI_RESTORE ebx ; \
- ret ; \
+ GET_THREAD_INFO(%_ASM_BX)
+#define EXIT ret ; \
CFI_ENDPROC
.text
ENTRY(__put_user_1)
ENTER
- cmpl TI_addr_limit(%ebx),%ecx
+ cmp TI_addr_limit(%_ASM_BX),%_ASM_CX
jae bad_put_user
-1: movb %al,(%ecx)
- xorl %eax,%eax
+1: movb %al,(%_ASM_CX)
+ xor %eax,%eax
EXIT
ENDPROC(__put_user_1)
ENTRY(__put_user_2)
ENTER
- movl TI_addr_limit(%ebx),%ebx
- subl $1,%ebx
- cmpl %ebx,%ecx
+ mov TI_addr_limit(%_ASM_BX),%_ASM_BX
+ sub $1,%_ASM_BX
+ cmp %_ASM_BX,%_ASM_CX
jae bad_put_user
-2: movw %ax,(%ecx)
- xorl %eax,%eax
+2: movw %ax,(%_ASM_CX)
+ xor %eax,%eax
EXIT
ENDPROC(__put_user_2)
ENTRY(__put_user_4)
ENTER
- movl TI_addr_limit(%ebx),%ebx
- subl $3,%ebx
- cmpl %ebx,%ecx
+ mov TI_addr_limit(%_ASM_BX),%_ASM_BX
+ sub $3,%_ASM_BX
+ cmp %_ASM_BX,%_ASM_CX
jae bad_put_user
-3: movl %eax,(%ecx)
- xorl %eax,%eax
+3: movl %eax,(%_ASM_CX)
+ xor %eax,%eax
EXIT
ENDPROC(__put_user_4)
ENTRY(__put_user_8)
ENTER
- movl TI_addr_limit(%ebx),%ebx
- subl $7,%ebx
- cmpl %ebx,%ecx
+ mov TI_addr_limit(%_ASM_BX),%_ASM_BX
+ sub $7,%_ASM_BX
+ cmp %_ASM_BX,%_ASM_CX
jae bad_put_user
-4: movl %eax,(%ecx)
-5: movl %edx,4(%ecx)
- xorl %eax,%eax
+4: mov %_ASM_AX,(%_ASM_CX)
+#ifdef CONFIG_X86_32
+5: movl %edx,4(%_ASM_CX)
+#endif
+ xor %eax,%eax
EXIT
ENDPROC(__put_user_8)
bad_put_user:
- CFI_STARTPROC simple
- CFI_DEF_CFA esp, 2*4
- CFI_OFFSET eip, -1*4
- CFI_OFFSET ebx, -2*4
- movl $-14,%eax
+ CFI_STARTPROC
+ movl $-EFAULT,%eax
EXIT
END(bad_put_user)
.section __ex_table,"a"
- .long 1b,bad_put_user
- .long 2b,bad_put_user
- .long 3b,bad_put_user
- .long 4b,bad_put_user
- .long 5b,bad_put_user
+ _ASM_PTR 1b,bad_put_user
+ _ASM_PTR 2b,bad_put_user
+ _ASM_PTR 3b,bad_put_user
+ _ASM_PTR 4b,bad_put_user
+#ifdef CONFIG_X86_32
+ _ASM_PTR 5b,bad_put_user
+#endif
.previous
diff --git a/arch/x86/lib/putuser_64.S b/arch/x86/lib/putuser_64.S
deleted file mode 100644
index 4989f5a8fa9..00000000000
--- a/arch/x86/lib/putuser_64.S
+++ /dev/null
@@ -1,106 +0,0 @@
-/*
- * __put_user functions.
- *
- * (C) Copyright 1998 Linus Torvalds
- * (C) Copyright 2005 Andi Kleen
- *
- * These functions have a non-standard call interface
- * to make them more efficient, especially as they
- * return an error value in addition to the "real"
- * return value.
- */
-
-/*
- * __put_user_X
- *
- * Inputs: %rcx contains the address
- * %rdx contains new value
- *
- * Outputs: %rax is error code (0 or -EFAULT)
- *
- * %r8 is destroyed.
- *
- * These functions should not modify any other registers,
- * as they get called from within inline assembly.
- */
-
-#include <linux/linkage.h>
-#include <asm/dwarf2.h>
-#include <asm/page.h>
-#include <asm/errno.h>
-#include <asm/asm-offsets.h>
-#include <asm/thread_info.h>
-
- .text
-ENTRY(__put_user_1)
- CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae bad_put_user
-1: movb %dl,(%rcx)
- xorl %eax,%eax
- ret
- CFI_ENDPROC
-ENDPROC(__put_user_1)
-
-ENTRY(__put_user_2)
- CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- addq $1,%rcx
- jc 20f
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae 20f
- decq %rcx
-2: movw %dx,(%rcx)
- xorl %eax,%eax
- ret
-20: decq %rcx
- jmp bad_put_user
- CFI_ENDPROC
-ENDPROC(__put_user_2)
-
-ENTRY(__put_user_4)
- CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- addq $3,%rcx
- jc 30f
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae 30f
- subq $3,%rcx
-3: movl %edx,(%rcx)
- xorl %eax,%eax
- ret
-30: subq $3,%rcx
- jmp bad_put_user
- CFI_ENDPROC
-ENDPROC(__put_user_4)
-
-ENTRY(__put_user_8)
- CFI_STARTPROC
- GET_THREAD_INFO(%r8)
- addq $7,%rcx
- jc 40f
- cmpq threadinfo_addr_limit(%r8),%rcx
- jae 40f
- subq $7,%rcx
-4: movq %rdx,(%rcx)
- xorl %eax,%eax
- ret
-40: subq $7,%rcx
- jmp bad_put_user
- CFI_ENDPROC
-ENDPROC(__put_user_8)
-
-bad_put_user:
- CFI_STARTPROC
- movq $(-EFAULT),%rax
- ret
- CFI_ENDPROC
-END(bad_put_user)
-
-.section __ex_table,"a"
- .quad 1b,bad_put_user
- .quad 2b,bad_put_user
- .quad 3b,bad_put_user
- .quad 4b,bad_put_user
-.previous
diff --git a/include/asm-x86/asm.h b/include/asm-x86/asm.h
index 70939820c55..97220321f39 100644
--- a/include/asm-x86/asm.h
+++ b/include/asm-x86/asm.h
@@ -3,8 +3,10 @@
#ifdef __ASSEMBLY__
# define __ASM_FORM(x) x
+# define __ASM_EX_SEC .section __ex_table
#else
# define __ASM_FORM(x) " " #x " "
+# define __ASM_EX_SEC " .section __ex_table,\"a\"\n"
#endif
#ifdef CONFIG_X86_32
@@ -14,6 +16,7 @@
#endif
#define __ASM_SIZE(inst) __ASM_SEL(inst##l, inst##q)
+#define __ASM_REG(reg) __ASM_SEL(e##reg, r##reg)
#define _ASM_PTR __ASM_SEL(.long, .quad)
#define _ASM_ALIGN __ASM_SEL(.balign 4, .balign 8)
@@ -24,10 +27,14 @@
#define _ASM_ADD __ASM_SIZE(add)
#define _ASM_SUB __ASM_SIZE(sub)
#define _ASM_XADD __ASM_SIZE(xadd)
+#define _ASM_AX __ASM_REG(ax)
+#define _ASM_BX __ASM_REG(bx)
+#define _ASM_CX __ASM_REG(cx)
+#define _ASM_DX __ASM_REG(dx)
/* Exception table entry */
# define _ASM_EXTABLE(from,to) \
- " .section __ex_table,\"a\"\n" \
+ __ASM_EX_SEC \
_ASM_ALIGN "\n" \
_ASM_PTR #from "," #to "\n" \
" .previous\n"
diff --git a/include/asm-x86/delay.h b/include/asm-x86/delay.h
index bb80880c834..409a649204a 100644
--- a/include/asm-x86/delay.h
+++ b/include/asm-x86/delay.h
@@ -26,10 +26,6 @@ extern void __delay(unsigned long loops);
((n) > 20000 ? __bad_ndelay() : __const_udelay((n) * 5ul)) : \
__ndelay(n))
-#ifdef CONFIG_X86_32
void use_tsc_delay(void);
-#else
-#define use_tsc_delay() {}
-#endif
#endif /* _ASM_X86_DELAY_H */
diff --git a/include/asm-x86/uaccess.h b/include/asm-x86/uaccess.h
index 9fefd2947e7..f6fa4d841bb 100644
--- a/include/asm-x86/uaccess.h
+++ b/include/asm-x86/uaccess.h
@@ -1,5 +1,453 @@
+#ifndef _ASM_UACCES_H_
+#define _ASM_UACCES_H_
+/*
+ * User space memory access functions
+ */
+#include <linux/errno.h>
+#include <linux/compiler.h>
+#include <linux/thread_info.h>
+#include <linux/prefetch.h>
+#include <linux/string.h>
+#include <asm/asm.h>
+#include <asm/page.h>
+
+#define VERIFY_READ 0
+#define VERIFY_WRITE 1
+
+/*
+ * The fs value determines whether argument validity checking should be
+ * performed or not. If get_fs() == USER_DS, checking is performed, with
+ * get_fs() == KERNEL_DS, checking is bypassed.
+ *
+ * For historical reasons, these macros are grossly misnamed.
+ */
+
+#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
+
+#define KERNEL_DS MAKE_MM_SEG(-1UL)
+#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
+
+#define get_ds() (KERNEL_DS)
+#define get_fs() (current_thread_info()->addr_limit)
+#define set_fs(x) (current_thread_info()->addr_limit = (x))
+
+#define segment_eq(a, b) ((a).seg == (b).seg)
+
+#define __addr_ok(addr) \
+ ((unsigned long __force)(addr) < \
+ (current_thread_info()->addr_limit.seg))
+
+/*
+ * Test whether a block of memory is a valid user space address.
+ * Returns 0 if the range is valid, nonzero otherwise.
+ *
+ * This is equivalent to the following test:
+ * (u33)addr + (u33)size >= (u33)current->addr_limit.seg (u65 for x86_64)
+ *
+ * This needs 33-bit (65-bit for x86_64) arithmetic. We have a carry...
+ */
+
+#define __range_not_ok(addr, size) \
+({ \
+ unsigned long flag, roksum; \
+ __chk_user_ptr(addr); \
+ asm("add %3,%1 ; sbb %0,%0 ; cmp %1,%4 ; sbb $0,%0" \
+ : "=&r" (flag), "=r" (roksum) \
+ : "1" (addr), "g" ((long)(size)), \
+ "rm" (current_thread_info()->addr_limit.seg)); \
+ flag; \
+})
+
+/**
+ * access_ok: - Checks if a user space pointer is valid
+ * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that
+ * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
+ * to write to a block, it is always safe to read from it.
+ * @addr: User space pointer to start of block to check
+ * @size: Size of block to check
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * Checks if a pointer to a block of memory in user space is valid.
+ *
+ * Returns true (nonzero) if the memory block may be valid, false (zero)
+ * if it is definitely invalid.
+ *
+ * Note that, depending on architecture, this function probably just
+ * checks that the pointer is in the user space range - after calling
+ * this function, memory access functions may still return -EFAULT.
+ */
+#define access_ok(type, addr, size) (likely(__range_not_ok(addr, size) == 0))
+
+/*
+ * The exception table consists of pairs of addresses: the first is the
+ * address of an instruction that is allowed to fault, and the second is
+ * the address at which the program should continue. No registers are
+ * modified, so it is entirely up to the continuation code to figure out
+ * what to do.
+ *
+ * All the routines below use bits of fixup code that are out of line
+ * with the main instruction path. This means when everything is well,
+ * we don't even have to jump over them. Further, they do not intrude
+ * on our cache or tlb entries.
+ */
+
+struct exception_table_entry {
+ unsigned long insn, fixup;
+};
+
+extern int fixup_exception(struct pt_regs *regs);
+
+/*
+ * These are the main single-value transfer routines. They automatically
+ * use the right size if we just have the right pointer type.
+ *
+ * This gets kind of ugly. We want to return _two_ values in "get_user()"
+ * and yet we don't want to do any pointers, because that is too much
+ * of a performance impact. Thus we have a few rather ugly macros here,
+ * and hide all the ugliness from the user.
+ *
+ * The "__xxx" versions of the user access functions are versions that
+ * do not verify the address space, that must have been done previously
+ * with a separate "access_ok()" call (this is used when we do multiple
+ * accesses to the same area of user memory).
+ */
+
+extern int __get_user_1(void);
+extern int __get_user_2(void);
+extern int __get_user_4(void);
+extern int __get_user_8(void);
+extern int __get_user_bad(void);
+
+#define __get_user_x(size, ret, x, ptr) \
+ asm volatile("call __get_user_" #size \
+ : "=a" (ret),"=d" (x) \
+ : "0" (ptr)) \
+
+/* Careful: we have to cast the result to the type of the pointer
+ * for sign reasons */
+
+/**
+ * get_user: - Get a simple variable from user space.
+ * @x: Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+#ifdef CONFIG_X86_32
+#define __get_user_8(__ret_gu, __val_gu, ptr) \
+ __get_user_x(X, __ret_gu, __val_gu, ptr)
+#else
+#define __get_user_8(__ret_gu, __val_gu, ptr) \
+ __get_user_x(8, __ret_gu, __val_gu, ptr)
+#endif
+
+#define get_user(x, ptr) \
+({ \
+ int __ret_gu; \
+ unsigned long __val_gu; \
+ __chk_user_ptr(ptr); \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ __get_user_x(1, __ret_gu, __val_gu, ptr); \
+ break; \
+ case 2: \
+ __get_user_x(2, __ret_gu, __val_gu, ptr); \
+ break; \
+ case 4: \
+ __get_user_x(4, __ret_gu, __val_gu, ptr); \
+ break; \
+ case 8: \
+ __get_user_8(__ret_gu, __val_gu, ptr); \
+ break; \
+ default: \
+ __get_user_x(X, __ret_gu, __val_gu, ptr); \
+ break; \
+ } \
+ (x) = (__typeof__(*(ptr)))__val_gu; \
+ __ret_gu; \
+})
+
+#define __put_user_x(size, x, ptr, __ret_pu) \
+ asm volatile("call __put_user_" #size : "=a" (__ret_pu) \
+ :"0" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
+
+
+
+#ifdef CONFIG_X86_32
+#define __put_user_u64(x, addr, err) \
+ asm volatile("1: movl %%eax,0(%2)\n" \
+ "2: movl %%edx,4(%2)\n" \
+ "3:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "4: movl %3,%0\n" \
+ " jmp 3b\n" \
+ ".previous\n" \
+ _ASM_EXTABLE(1b, 4b) \
+ _ASM_EXTABLE(2b, 4b) \
+ : "=r" (err) \
+ : "A" (x), "r" (addr), "i" (-EFAULT), "0" (err))
+
+#define __put_user_x8(x, ptr, __ret_pu) \
+ asm volatile("call __put_user_8" : "=a" (__ret_pu) \
+ : "A" ((typeof(*(ptr)))(x)), "c" (ptr) : "ebx")
+#else
+#define __put_user_u64(x, ptr, retval) \
+ __put_user_asm(x, ptr, retval, "q", "", "Zr", -EFAULT)
+#define __put_user_x8(x, ptr, __ret_pu) __put_user_x(8, x, ptr, __ret_pu)
+#endif
+
+extern void __put_user_bad(void);
+
+/*
+ * Strange magic calling convention: pointer in %ecx,
+ * value in %eax(:%edx), return value in %eax. clobbers %rbx
+ */
+extern void __put_user_1(void);
+extern void __put_user_2(void);
+extern void __put_user_4(void);
+extern void __put_user_8(void);
+
+#ifdef CONFIG_X86_WP_WORKS_OK
+
+/**
+ * put_user: - Write a simple value into user space.
+ * @x: Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+#define put_user(x, ptr) \
+({ \
+ int __ret_pu; \
+ __typeof__(*(ptr)) __pu_val; \
+ __chk_user_ptr(ptr); \
+ __pu_val = x; \
+ switch (sizeof(*(ptr))) { \
+ case 1: \
+ __put_user_x(1, __pu_val, ptr, __ret_pu); \
+ break; \
+ case 2: \
+ __put_user_x(2, __pu_val, ptr, __ret_pu); \
+ break; \
+ case 4: \
+ __put_user_x(4, __pu_val, ptr, __ret_pu); \
+ break; \
+ case 8: \
+ __put_user_x8(__pu_val, ptr, __ret_pu); \
+ break; \
+ default: \
+ __put_user_x(X, __pu_val, ptr, __ret_pu); \
+ break; \
+ } \
+ __ret_pu; \
+})
+
+#define __put_user_size(x, ptr, size, retval, errret) \
+do { \
+ retval = 0; \
+ __chk_user_ptr(ptr); \
+ switch (size) { \
+ case 1: \
+ __put_user_asm(x, ptr, retval, "b", "b", "iq", errret); \
+ break; \
+ case 2: \
+ __put_user_asm(x, ptr, retval, "w", "w", "ir", errret); \
+ break; \
+ case 4: \
+ __put_user_asm(x, ptr, retval, "l", "k", "ir", errret);\
+ break; \
+ case 8: \
+ __put_user_u64((__typeof__(*ptr))(x), ptr, retval); \
+ break; \
+ default: \
+ __put_user_bad(); \
+ } \
+} while (0)
+
+#else
+
+#define __put_user_size(x, ptr, size, retval, errret) \
+do { \
+ __typeof__(*(ptr))__pus_tmp = x; \
+ retval = 0; \
+ \
+ if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, size) != 0)) \
+ retval = errret; \
+} while (0)
+
+#define put_user(x, ptr) \
+({ \
+ int __ret_pu; \
+ __typeof__(*(ptr))__pus_tmp = x; \
+ __ret_pu = 0; \
+ if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, \
+ sizeof(*(ptr))) != 0)) \
+ __ret_pu = -EFAULT; \
+ __ret_pu; \
+})
+#endif
+
+#ifdef CONFIG_X86_32
+#define __get_user_asm_u64(x, ptr, retval, errret) (x) = __get_user_bad()
+#else
+#define __get_user_asm_u64(x, ptr, retval, errret) \
+ __get_user_asm(x, ptr, retval, "q", "", "=r", errret)
+#endif
+
+#define __get_user_size(x, ptr, size, retval, errret) \
+do { \
+ retval = 0; \
+ __chk_user_ptr(ptr); \
+ switch (size) { \
+ case 1: \
+ __get_user_asm(x, ptr, retval, "b", "b", "=q", errret); \
+ break; \
+ case 2: \
+ __get_user_asm(x, ptr, retval, "w", "w", "=r", errret); \
+ break; \
+ case 4: \
+ __get_user_asm(x, ptr, retval, "l", "k", "=r", errret); \
+ break; \
+ case 8: \
+ __get_user_asm_u64(x, ptr, retval, errret); \
+ break; \
+ default: \
+ (x) = __get_user_bad(); \
+ } \
+} while (0)
+
+#define __get_user_asm(x, addr, err, itype, rtype, ltype, errret) \
+ asm volatile("1: mov"itype" %2,%"rtype"1\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: mov %3,%0\n" \
+ " xor"itype" %"rtype"1,%"rtype"1\n" \
+ " jmp 2b\n" \
+ ".previous\n" \
+ _ASM_EXTABLE(1b, 3b) \
+ : "=r" (err), ltype(x) \
+ : "m" (__m(addr)), "i" (errret), "0" (err))
+
+#define __put_user_nocheck(x, ptr, size) \
+({ \
+ long __pu_err; \
+ __put_user_size((x), (ptr), (size), __pu_err, -EFAULT); \
+ __pu_err; \
+})
+
+#define __get_user_nocheck(x, ptr, size) \
+({ \
+ long __gu_err; \
+ unsigned long __gu_val; \
+ __get_user_size(__gu_val, (ptr), (size), __gu_err, -EFAULT); \
+ (x) = (__force __typeof__(*(ptr)))__gu_val; \
+ __gu_err; \
+})
+
+/* FIXME: this hack is definitely wrong -AK */
+struct __large_struct { unsigned long buf[100]; };
+#define __m(x) (*(struct __large_struct __user *)(x))
+
+/*
+ * Tell gcc we read from memory instead of writing: this is because
+ * we do not write to any memory gcc knows about, so there are no
+ * aliasing issues.
+ */
+#define __put_user_asm(x, addr, err, itype, rtype, ltype, errret) \
+ asm volatile("1: mov"itype" %"rtype"1,%2\n" \
+ "2:\n" \
+ ".section .fixup,\"ax\"\n" \
+ "3: mov %3,%0\n" \
+ " jmp 2b\n" \
+ ".previous\n" \
+ _ASM_EXTABLE(1b, 3b) \
+ : "=r"(err) \
+ : ltype(x), "m" (__m(addr)), "i" (errret), "0" (err))
+/**
+ * __get_user: - Get a simple variable from user space, with less checking.
+ * @x: Variable to store result.
+ * @ptr: Source address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple variable from user space to kernel
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and the result of
+ * dereferencing @ptr must be assignable to @x without a cast.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ * On error, the variable @x is set to zero.
+ */
+
+#define __get_user(x, ptr) \
+ __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
+/**
+ * __put_user: - Write a simple value into user space, with less checking.
+ * @x: Value to copy to user space.
+ * @ptr: Destination address, in user space.
+ *
+ * Context: User context only. This function may sleep.
+ *
+ * This macro copies a single simple value from kernel space to user
+ * space. It supports simple types like char and int, but not larger
+ * data types like structures or arrays.
+ *
+ * @ptr must have pointer-to-simple-variable type, and @x must be assignable
+ * to the result of dereferencing @ptr.
+ *
+ * Caller must check the pointer with access_ok() before calling this
+ * function.
+ *
+ * Returns zero on success, or -EFAULT on error.
+ */
+
+#define __put_user(x, ptr) \
+ __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
+
+#define __get_user_unaligned __get_user
+#define __put_user_unaligned __put_user
+
+/*
+ * movsl can be slow when source and dest are not both 8-byte aligned
+ */
+#ifdef CONFIG_X86_INTEL_USERCOPY
+extern struct movsl_mask {
+ int mask;
+} ____cacheline_aligned_in_smp movsl_mask;
+#endif
+
+#define ARCH_HAS_NOCACHE_UACCESS 1
+
#ifdef CONFIG_X86_32
# include "uaccess_32.h"
#else
+# define ARCH_HAS_SEARCH_EXTABLE
# include "uaccess_64.h"
#endif
+
+#endif
diff --git a/include/asm-x86/uaccess_32.h b/include/asm-x86/uaccess_32.h
index 8e7595c1f34..6fdef39a0bc 100644
--- a/include/asm-x86/uaccess_32.h
+++ b/include/asm-x86/uaccess_32.h
@@ -11,426 +11,6 @@
#include <asm/asm.h>
#include <asm/page.h>
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not. If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-
-
-#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFUL)
-#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
-
-#define get_ds() (KERNEL_DS)
-#define get_fs() (current_thread_info()->addr_limit)
-#define set_fs(x) (current_thread_info()->addr_limit = (x))
-
-#define segment_eq(a, b) ((a).seg == (b).seg)
-
-/*
- * movsl can be slow when source and dest are not both 8-byte aligned
- */
-#ifdef CONFIG_X86_INTEL_USERCOPY
-extern struct movsl_mask {
- int mask;
-} ____cacheline_aligned_in_smp movsl_mask;
-#endif
-
-#define __addr_ok(addr) \
- ((unsigned long __force)(addr) < \
- (current_thread_info()->addr_limit.seg))
-
-/*
- * Test whether a block of memory is a valid user space address.
- * Returns 0 if the range is valid, nonzero otherwise.
- *
- * This is equivalent to the following test:
- * (u33)addr + (u33)size >= (u33)current->addr_limit.seg
- *
- * This needs 33-bit arithmetic. We have a carry...
- */
-#define __range_ok(addr, size) \
-({ \
- unsigned long flag, roksum; \
- __chk_user_ptr(addr); \
- asm("addl %3,%1 ; sbbl %0,%0; cmpl %1,%4; sbbl $0,%0" \
- :"=&r" (flag), "=r" (roksum) \
- :"1" (addr), "g" ((int)(size)), \
- "rm" (current_thread_info()->addr_limit.seg)); \
- flag; \
-})
-
-/**
- * access_ok: - Checks if a user space pointer is valid
- * @type: Type of access: %VERIFY_READ or %VERIFY_WRITE. Note that
- * %VERIFY_WRITE is a superset of %VERIFY_READ - if it is safe
- * to write to a block, it is always safe to read from it.
- * @addr: User space pointer to start of block to check
- * @size: Size of block to check
- *
- * Context: User context only. This function may sleep.
- *
- * Checks if a pointer to a block of memory in user space is valid.
- *
- * Returns true (nonzero) if the memory block may be valid, false (zero)
- * if it is definitely invalid.
- *
- * Note that, depending on architecture, this function probably just
- * checks that the pointer is in the user space range - after calling
- * this function, memory access functions may still return -EFAULT.
- */
-#define access_ok(type, addr, size) (likely(__range_ok(addr, size) == 0))
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
- unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-/*
- * These are the main single-value transfer routines. They automatically
- * use the right size if we just have the right pointer type.
- *
- * This gets kind of ugly. We want to return _two_ values in "get_user()"
- * and yet we don't want to do any pointers, because that is too much
- * of a performance impact. Thus we have a few rather ugly macros here,
- * and hide all the ugliness from the user.
- *
- * The "__xxx" versions of the user access functions are versions that
- * do not verify the address space, that must have been done previously
- * with a separate "access_ok()" call (this is used when we do multiple
- * accesses to the same area of user memory).
- */
-
-extern void __get_user_1(void);
-extern void __get_user_2(void);
-extern void __get_user_4(void);
-
-#define __get_user_x(size, ret, x, ptr) \
- asm volatile("call __get_user_" #size \
- :"=a" (ret),"=d" (x) \
- :"0" (ptr))
-
-
-/* Careful: we have to cast the result to the type of the pointer
- * for sign reasons */
-
-/**
- * get_user: - Get a simple variable from user space.
- * @x: Variable to store result.
- * @ptr: Source address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple variable from user space to kernel
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and the result of
- * dereferencing @ptr must be assignable to @x without a cast.
- *
- * Returns zero on success, or -EFAULT on error.
- * On error, the variable @x is set to zero.
- */
-#define get_user(x, ptr) \
-({ \
- int __ret_gu; \
- unsigned long __val_gu; \
- __chk_user_ptr(ptr); \
- switch (sizeof(*(ptr))) { \
- case 1: \
- __get_user_x(1, __ret_gu, __val_gu, ptr); \
- break; \
- case 2: \
- __get_user_x(2, __ret_gu, __val_gu, ptr); \
- break; \
- case 4: \
- __get_user_x(4, __ret_gu, __val_gu, ptr); \
- break; \
- default: \
- __get_user_x(X, __ret_gu, __val_gu, ptr); \
- break; \
- } \
- (x) = (__typeof__(*(ptr)))__val_gu; \
- __ret_gu; \
-})
-
-extern void __put_user_bad(void);
-
-/*
- * Strange magic calling convention: pointer in %ecx,
- * value in %eax(:%edx), return value in %eax, no clobbers.
- */
-extern void __put_user_1(void);
-extern void __put_user_2(void);
-extern void __put_user_4(void);
-extern void __put_user_8(void);
-
-#define __put_user_1(x, ptr) \
- asm volatile("call __put_user_1" : "=a" (__ret_pu) \
- : "0" ((typeof(*(ptr)))(x)), "c" (ptr))
-
-#define __put_user_2(x, ptr) \
- asm volatile("call __put_user_2" : "=a" (__ret_pu) \
- : "0" ((typeof(*(ptr)))(x)), "c" (ptr))
-
-#define __put_user_4(x, ptr) \
- asm volatile("call __put_user_4" : "=a" (__ret_pu) \
- : "0" ((typeof(*(ptr)))(x)), "c" (ptr))
-
-#define __put_user_8(x, ptr) \
- asm volatile("call __put_user_8" : "=a" (__ret_pu) \
- : "A" ((typeof(*(ptr)))(x)), "c" (ptr))
-
-#define __put_user_X(x, ptr) \
- asm volatile("call __put_user_X" : "=a" (__ret_pu) \
- : "c" (ptr))
-
-/**
- * put_user: - Write a simple value into user space.
- * @x: Value to copy to user space.
- * @ptr: Destination address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple value from kernel space to user
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and @x must be assignable
- * to the result of dereferencing @ptr.
- *
- * Returns zero on success, or -EFAULT on error.
- */
-#ifdef CONFIG_X86_WP_WORKS_OK
-
-#define put_user(x, ptr) \
-({ \
- int __ret_pu; \
- __typeof__(*(ptr)) __pu_val; \
- __chk_user_ptr(ptr); \
- __pu_val = x; \
- switch (sizeof(*(ptr))) { \
- case 1: \
- __put_user_1(__pu_val, ptr); \
- break; \
- case 2: \
- __put_user_2(__pu_val, ptr); \
- break; \
- case 4: \
- __put_user_4(__pu_val, ptr); \
- break; \
- case 8: \
- __put_user_8(__pu_val, ptr); \
- break; \
- default: \
- __put_user_X(__pu_val, ptr); \
- break; \
- } \
- __ret_pu; \
-})
-
-#else
-#define put_user(x, ptr) \
-({ \
- int __ret_pu; \
- __typeof__(*(ptr))__pus_tmp = x; \
- __ret_pu = 0; \
- if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, \
- sizeof(*(ptr))) != 0)) \
- __ret_pu = -EFAULT; \
- __ret_pu; \
-})
-
-
-#endif
-
-/**
- * __get_user: - Get a simple variable from user space, with less checking.
- * @x: Variable to store result.
- * @ptr: Source address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple variable from user space to kernel
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and the result of
- * dereferencing @ptr must be assignable to @x without a cast.
- *
- * Caller must check the pointer with access_ok() before calling this
- * function.
- *
- * Returns zero on success, or -EFAULT on error.
- * On error, the variable @x is set to zero.
- */
-#define __get_user(x, ptr) \
- __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-
-
-/**
- * __put_user: - Write a simple value into user space, with less checking.
- * @x: Value to copy to user space.
- * @ptr: Destination address, in user space.
- *
- * Context: User context only. This function may sleep.
- *
- * This macro copies a single simple value from kernel space to user
- * space. It supports simple types like char and int, but not larger
- * data types like structures or arrays.
- *
- * @ptr must have pointer-to-simple-variable type, and @x must be assignable
- * to the result of dereferencing @ptr.
- *
- * Caller must check the pointer with access_ok() before calling this
- * function.
- *
- * Returns zero on success, or -EFAULT on error.
- */
-#define __put_user(x, ptr) \
- __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-
-#define __put_user_nocheck(x, ptr, size) \
-({ \
- long __pu_err; \
- __put_user_size((x), (ptr), (size), __pu_err, -EFAULT); \
- __pu_err; \
-})
-
-
-#define __put_user_u64(x, addr, err) \
- asm volatile("1: movl %%eax,0(%2)\n" \
- "2: movl %%edx,4(%2)\n" \
- "3:\n" \
- ".section .fixup,\"ax\"\n" \
- "4: movl %3,%0\n" \
- " jmp 3b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 4b) \
- _ASM_EXTABLE(2b, 4b) \
- : "=r" (err) \
- : "A" (x), "r" (addr), "i" (-EFAULT), "0" (err))
-
-#ifdef CONFIG_X86_WP_WORKS_OK
-
-#define __put_user_size(x, ptr, size, retval, errret) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: \
- __put_user_asm(x, ptr, retval, "b", "b", "iq", errret); \
- break; \
- case 2: \
- __put_user_asm(x, ptr, retval, "w", "w", "ir", errret); \
- break; \
- case 4: \
- __put_user_asm(x, ptr, retval, "l", "", "ir", errret); \
- break; \
- case 8: \
- __put_user_u64((__typeof__(*ptr))(x), ptr, retval); \
- break; \
- default: \
- __put_user_bad(); \
- } \
-} while (0)
-
-#else
-
-#define __put_user_size(x, ptr, size, retval, errret) \
-do { \
- __typeof__(*(ptr))__pus_tmp = x; \
- retval = 0; \
- \
- if (unlikely(__copy_to_user_ll(ptr, &__pus_tmp, size) != 0)) \
- retval = errret; \
-} while (0)
-
-#endif
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct __user *)(x))
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-#define __put_user_asm(x, addr, err, itype, rtype, ltype, errret) \
- asm volatile("1: mov"itype" %"rtype"1,%2\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: movl %3,%0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 3b) \
- : "=r"(err) \
- : ltype (x), "m" (__m(addr)), "i" (errret), "0" (err))
-
-
-#define __get_user_nocheck(x, ptr, size) \
-({ \
- long __gu_err; \
- unsigned long __gu_val; \
- __get_user_size(__gu_val, (ptr), (size), __gu_err, -EFAULT); \
- (x) = (__typeof__(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-extern long __get_user_bad(void);
-
-#define __get_user_size(x, ptr, size, retval, errret) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: \
- __get_user_asm(x, ptr, retval, "b", "b", "=q", errret); \
- break; \
- case 2: \
- __get_user_asm(x, ptr, retval, "w", "w", "=r", errret); \
- break; \
- case 4: \
- __get_user_asm(x, ptr, retval, "l", "", "=r", errret); \
- break; \
- default: \
- (x) = __get_user_bad(); \
- } \
-} while (0)
-
-#define __get_user_asm(x, addr, err, itype, rtype, ltype, errret) \
- asm volatile("1: mov"itype" %2,%"rtype"1\n" \
- "2:\n" \
- ".section .fixup,\"ax\"\n" \
- "3: movl %3,%0\n" \
- " xor"itype" %"rtype"1,%"rtype"1\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 3b) \
- : "=r" (err), ltype (x) \
- : "m" (__m(addr)), "i" (errret), "0" (err))
-
-
unsigned long __must_check __copy_to_user_ll
(void __user *to, const void *from, unsigned long n);
unsigned long __must_check __copy_from_user_ll
@@ -576,8 +156,6 @@ __copy_from_user(void *to, const void __user *from, unsigned long n)
return __copy_from_user_ll(to, from, n);
}
-#define ARCH_HAS_NOCACHE_UACCESS
-
static __always_inline unsigned long __copy_from_user_nocache(void *to,
const void __user *from, unsigned long n)
{
diff --git a/include/asm-x86/uaccess_64.h b/include/asm-x86/uaccess_64.h
index b8a2f433990..4e3ec004e14 100644
--- a/include/asm-x86/uaccess_64.h
+++ b/include/asm-x86/uaccess_64.h
@@ -9,265 +9,6 @@
#include <linux/prefetch.h>
#include <asm/page.h>
-#define VERIFY_READ 0
-#define VERIFY_WRITE 1
-
-/*
- * The fs value determines whether argument validity checking should be
- * performed or not. If get_fs() == USER_DS, checking is performed, with
- * get_fs() == KERNEL_DS, checking is bypassed.
- *
- * For historical reasons, these macros are grossly misnamed.
- */
-
-#define MAKE_MM_SEG(s) ((mm_segment_t) { (s) })
-
-#define KERNEL_DS MAKE_MM_SEG(0xFFFFFFFFFFFFFFFFUL)
-#define USER_DS MAKE_MM_SEG(PAGE_OFFSET)
-
-#define get_ds() (KERNEL_DS)
-#define get_fs() (current_thread_info()->addr_limit)
-#define set_fs(x) (current_thread_info()->addr_limit = (x))
-
-#define segment_eq(a, b) ((a).seg == (b).seg)
-
-#define __addr_ok(addr) (!((unsigned long)(addr) & \
- (current_thread_info()->addr_limit.seg)))
-
-/*
- * Uhhuh, this needs 65-bit arithmetic. We have a carry..
- */
-#define __range_not_ok(addr, size) \
-({ \
- unsigned long flag, roksum; \
- __chk_user_ptr(addr); \
- asm("# range_ok\n\r" \
- "addq %3,%1 ; sbbq %0,%0 ; cmpq %1,%4 ; sbbq $0,%0" \
- : "=&r" (flag), "=r" (roksum) \
- : "1" (addr), "g" ((long)(size)), \
- "g" (current_thread_info()->addr_limit.seg)); \
- flag; \
-})
-
-#define access_ok(type, addr, size) (__range_not_ok(addr, size) == 0)
-
-/*
- * The exception table consists of pairs of addresses: the first is the
- * address of an instruction that is allowed to fault, and the second is
- * the address at which the program should continue. No registers are
- * modified, so it is entirely up to the continuation code to figure out
- * what to do.
- *
- * All the routines below use bits of fixup code that are out of line
- * with the main instruction path. This means when everything is well,
- * we don't even have to jump over them. Further, they do not intrude
- * on our cache or tlb entries.
- */
-
-struct exception_table_entry {
- unsigned long insn, fixup;
-};
-
-extern int fixup_exception(struct pt_regs *regs);
-
-#define ARCH_HAS_SEARCH_EXTABLE
-
-/*
- * These are the main single-value transfer routines. They automatically
- * use the right size if we just have the right pointer type.
- *
- * This gets kind of ugly. We want to return _two_ values in "get_user()"
- * and yet we don't want to do any pointers, because that is too much
- * of a performance impact. Thus we have a few rather ugly macros here,
- * and hide all the ugliness from the user.
- *
- * The "__xxx" versions of the user access functions are versions that
- * do not verify the address space, that must have been done previously
- * with a separate "access_ok()" call (this is used when we do multiple
- * accesses to the same area of user memory).
- */
-
-#define __get_user_x(size, ret, x, ptr) \
- asm volatile("call __get_user_" #size \
- : "=a" (ret),"=d" (x) \
- : "c" (ptr) \
- : "r8")
-
-/* Careful: we have to cast the result to the type of the pointer
- * for sign reasons */
-
-#define get_user(x, ptr) \
-({ \
- unsigned long __val_gu; \
- int __ret_gu; \
- __chk_user_ptr(ptr); \
- switch (sizeof(*(ptr))) { \
- case 1: \
- __get_user_x(1, __ret_gu, __val_gu, ptr); \
- break; \
- case 2: \
- __get_user_x(2, __ret_gu, __val_gu, ptr); \
- break; \
- case 4: \
- __get_user_x(4, __ret_gu, __val_gu, ptr); \
- break; \
- case 8: \
- __get_user_x(8, __ret_gu, __val_gu, ptr); \
- break; \
- default: \
- __get_user_bad(); \
- break; \
- } \
- (x) = (__force typeof(*(ptr)))__val_gu; \
- __ret_gu; \
-})
-
-extern void __put_user_1(void);
-extern void __put_user_2(void);
-extern void __put_user_4(void);
-extern void __put_user_8(void);
-extern void __put_user_bad(void);
-
-#define __put_user_x(size, ret, x, ptr) \
- asm volatile("call __put_user_" #size \
- :"=a" (ret) \
- :"c" (ptr),"d" (x) \
- :"r8")
-
-#define put_user(x, ptr) \
- __put_user_check((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-
-#define __get_user(x, ptr) \
- __get_user_nocheck((x), (ptr), sizeof(*(ptr)))
-#define __put_user(x, ptr) \
- __put_user_nocheck((__typeof__(*(ptr)))(x), (ptr), sizeof(*(ptr)))
-
-#define __get_user_unaligned __get_user
-#define __put_user_unaligned __put_user
-
-#define __put_user_nocheck(x, ptr, size) \
-({ \
- int __pu_err; \
- __put_user_size((x), (ptr), (size), __pu_err); \
- __pu_err; \
-})
-
-
-#define __put_user_check(x, ptr, size) \
-({ \
- int __pu_err; \
- typeof(*(ptr)) __user *__pu_addr = (ptr); \
- switch (size) { \
- case 1: \
- __put_user_x(1, __pu_err, x, __pu_addr); \
- break; \
- case 2: \
- __put_user_x(2, __pu_err, x, __pu_addr); \
- break; \
- case 4: \
- __put_user_x(4, __pu_err, x, __pu_addr); \
- break; \
- case 8: \
- __put_user_x(8, __pu_err, x, __pu_addr); \
- break; \
- default: \
- __put_user_bad(); \
- } \
- __pu_err; \
-})
-
-#define __put_user_size(x, ptr, size, retval) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: \
- __put_user_asm(x, ptr, retval, "b", "b", "iq", -EFAULT);\
- break; \
- case 2: \
- __put_user_asm(x, ptr, retval, "w", "w", "ir", -EFAULT);\
- break; \
- case 4: \
- __put_user_asm(x, ptr, retval, "l", "k", "ir", -EFAULT);\
- break; \
- case 8: \
- __put_user_asm(x, ptr, retval, "q", "", "Zr", -EFAULT); \
- break; \
- default: \
- __put_user_bad(); \
- } \
-} while (0)
-
-/* FIXME: this hack is definitely wrong -AK */
-struct __large_struct { unsigned long buf[100]; };
-#define __m(x) (*(struct __large_struct __user *)(x))
-
-/*
- * Tell gcc we read from memory instead of writing: this is because
- * we do not write to any memory gcc knows about, so there are no
- * aliasing issues.
- */
-#define __put_user_asm(x, addr, err, itype, rtype, ltype, errno) \
- asm volatile("1: mov"itype" %"rtype"1,%2\n" \
- "2:\n" \
- ".section .fixup, \"ax\"\n" \
- "3: mov %3,%0\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 3b) \
- : "=r"(err) \
- : ltype (x), "m" (__m(addr)), "i" (errno), "0" (err))
-
-
-#define __get_user_nocheck(x, ptr, size) \
-({ \
- int __gu_err; \
- unsigned long __gu_val; \
- __get_user_size(__gu_val, (ptr), (size), __gu_err); \
- (x) = (__force typeof(*(ptr)))__gu_val; \
- __gu_err; \
-})
-
-extern int __get_user_1(void);
-extern int __get_user_2(void);
-extern int __get_user_4(void);
-extern int __get_user_8(void);
-extern int __get_user_bad(void);
-
-#define __get_user_size(x, ptr, size, retval) \
-do { \
- retval = 0; \
- __chk_user_ptr(ptr); \
- switch (size) { \
- case 1: \
- __get_user_asm(x, ptr, retval, "b", "b", "=q", -EFAULT);\
- break; \
- case 2: \
- __get_user_asm(x, ptr, retval, "w", "w", "=r", -EFAULT);\
- break; \
- case 4: \
- __get_user_asm(x, ptr, retval, "l", "k", "=r", -EFAULT);\
- break; \
- case 8: \
- __get_user_asm(x, ptr, retval, "q", "", "=r", -EFAULT); \
- break; \
- default: \
- (x) = __get_user_bad(); \
- } \
-} while (0)
-
-#define __get_user_asm(x, addr, err, itype, rtype, ltype, errno) \
- asm volatile("1: mov"itype" %2,%"rtype"1\n" \
- "2:\n" \
- ".section .fixup, \"ax\"\n" \
- "3: mov %3,%0\n" \
- " xor"itype" %"rtype"1,%"rtype"1\n" \
- " jmp 2b\n" \
- ".previous\n" \
- _ASM_EXTABLE(1b, 3b) \
- : "=r" (err), ltype (x) \
- : "m" (__m(addr)), "i"(errno), "0"(err))
-
/*
* Copy To/From Userspace
*/
@@ -437,7 +178,6 @@ __copy_to_user_inatomic(void __user *dst, const void *src, unsigned size)
return copy_user_generic((__force void *)dst, src, size);
}
-#define ARCH_HAS_NOCACHE_UACCESS 1
extern long __copy_user_nocache(void *dst, const void __user *src,
unsigned size, int zerorest);
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-15 21:14:50 +0000