diff options
| -rw-r--r-- | drivers/net/e1000e/netdev.c | 22 |
1 files changed, 13 insertions, 9 deletions
diff --git a/drivers/net/e1000e/netdev.c b/drivers/net/e1000e/netdev.c index 46c5ac6b4d7..e87ed313352 100644 --- a/drivers/net/e1000e/netdev.c +++ b/drivers/net/e1000e/netdev.c @@ -2328,8 +2328,11 @@ void e1000e_reset(struct e1000_adapter *adapter) struct e1000_mac_info *mac = &adapter->hw.mac; struct e1000_hw *hw = &adapter->hw; u32 tx_space, min_tx_space, min_rx_space; + u32 pba; u16 hwm; + ew32(PBA, adapter->pba); + if (mac->max_frame_size > ETH_FRAME_LEN + ETH_FCS_LEN ) { /* To maintain wire speed transmits, the Tx FIFO should be * large enough to accommodate two full transmit packets, @@ -2337,11 +2340,11 @@ void e1000e_reset(struct e1000_adapter *adapter) * the Rx FIFO should be large enough to accommodate at least * one full receive packet and is similarly rounded up and * expressed in KB. */ - adapter->pba = er32(PBA); + pba = er32(PBA); /* upper 16 bits has Tx packet buffer allocation size in KB */ - tx_space = adapter->pba >> 16; + tx_space = pba >> 16; /* lower 16 bits has Rx packet buffer allocation size in KB */ - adapter->pba &= 0xffff; + pba &= 0xffff; /* the tx fifo also stores 16 bytes of information about the tx * but don't include ethernet FCS because hardware appends it */ min_tx_space = (mac->max_frame_size + @@ -2357,20 +2360,21 @@ void e1000e_reset(struct e1000_adapter *adapter) /* If current Tx allocation is less than the min Tx FIFO size, * and the min Tx FIFO size is less than the current Rx FIFO * allocation, take space away from current Rx allocation */ - if (tx_space < min_tx_space && - ((min_tx_space - tx_space) < adapter->pba)) { - adapter->pba -= - (min_tx_space - tx_space); + if ((tx_space < min_tx_space) && + ((min_tx_space - tx_space) < pba)) { + pba -= min_tx_space - tx_space; /* if short on rx space, rx wins and must trump tx * adjustment or use Early Receive if available */ - if ((adapter->pba < min_rx_space) && + if ((pba < min_rx_space) && (!(adapter->flags & FLAG_HAS_ERT))) /* ERT enabled in e1000_configure_rx */ - adapter->pba = min_rx_space; + pba = min_rx_space; } + + ew32(PBA, pba); } - ew32(PBA, adapter->pba); /* flow control settings */ /* The high water mark must be low enough to fit one full frame |