aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--Documentation/ABI/testing/sysfs-kernel-slab479
-rw-r--r--Documentation/DocBook/Makefile5
-rw-r--r--Documentation/DocBook/kgdb.tmpl2
-rw-r--r--Documentation/filesystems/Locking24
-rw-r--r--Documentation/filesystems/tmpfs.txt2
-rw-r--r--Documentation/input/bcm5974.txt65
-rw-r--r--Documentation/input/multi-touch-protocol.txt140
-rw-r--r--Documentation/kernel-doc-nano-HOWTO.txt7
-rw-r--r--Documentation/kernel-parameters.txt12
-rw-r--r--Documentation/lockdep-design.txt6
-rw-r--r--Documentation/networking/ip-sysctl.txt15
-rw-r--r--Documentation/sound/alsa/Procfile.txt5
-rw-r--r--Documentation/sysctl/vm.txt32
-rw-r--r--Documentation/sysfs-rules.txt2
-rw-r--r--MAINTAINERS39
-rw-r--r--Makefile10
-rw-r--r--arch/alpha/include/asm/barrier.h2
-rw-r--r--arch/alpha/include/asm/futex.h118
-rw-r--r--arch/alpha/include/asm/percpu.h26
-rw-r--r--arch/alpha/include/asm/uaccess.h2
-rw-r--r--arch/alpha/kernel/Makefile6
-rw-r--r--arch/alpha/kernel/binfmt_loader.c2
-rw-r--r--arch/alpha/kernel/err_ev6.c2
-rw-r--r--arch/alpha/kernel/err_ev7.c4
-rw-r--r--arch/alpha/kernel/err_impl.h10
-rw-r--r--arch/alpha/kernel/err_marvel.c2
-rw-r--r--arch/alpha/kernel/err_titan.c4
-rw-r--r--arch/alpha/kernel/proto.h5
-rw-r--r--arch/alpha/mm/extable.c40
-rw-r--r--arch/arm/Kconfig67
-rw-r--r--arch/arm/common/gic.c4
-rw-r--r--arch/arm/configs/davinci_all_defconfig1784
-rw-r--r--arch/arm/configs/kirkwood_defconfig92
-rw-r--r--arch/arm/configs/mv78xx0_defconfig429
-rw-r--r--arch/arm/configs/mx31moboard_defconfig790
-rw-r--r--arch/arm/configs/mx3_defconfig2
-rw-r--r--arch/arm/configs/orion5x_defconfig363
-rw-r--r--arch/arm/configs/viper_defconfig1
-rw-r--r--arch/arm/include/asm/elf.h16
-rw-r--r--arch/arm/include/asm/hardware/gic.h2
-rw-r--r--arch/arm/include/asm/smp.h12
-rw-r--r--arch/arm/kernel/module.c15
-rw-r--r--arch/arm/kernel/smp.c46
-rw-r--r--arch/arm/mach-davinci/Kconfig47
-rw-r--r--arch/arm/mach-davinci/Makefile9
-rw-r--r--arch/arm/mach-davinci/board-dm644x-evm.c (renamed from arch/arm/mach-davinci/board-evm.c)318
-rw-r--r--arch/arm/mach-davinci/clock.c385
-rw-r--r--arch/arm/mach-davinci/clock.h87
-rw-r--r--arch/arm/mach-davinci/devices.c7
-rw-r--r--arch/arm/mach-davinci/dm644x.c461
-rw-r--r--arch/arm/mach-davinci/dma.c1135
-rw-r--r--arch/arm/mach-davinci/gpio.c82
-rw-r--r--arch/arm/mach-davinci/id.c35
-rw-r--r--arch/arm/mach-davinci/include/mach/asp.h25
-rw-r--r--arch/arm/mach-davinci/include/mach/board-dm6446evm.h20
-rw-r--r--arch/arm/mach-davinci/include/mach/clkdev.h13
-rw-r--r--arch/arm/mach-davinci/include/mach/clock.h1
-rw-r--r--arch/arm/mach-davinci/include/mach/common.h6
-rw-r--r--arch/arm/mach-davinci/include/mach/cputype.h49
-rw-r--r--arch/arm/mach-davinci/include/mach/dm644x.h37
-rw-r--r--arch/arm/mach-davinci/include/mach/edma.h228
-rw-r--r--arch/arm/mach-davinci/include/mach/gpio.h27
-rw-r--r--arch/arm/mach-davinci/include/mach/hardware.h51
-rw-r--r--arch/arm/mach-davinci/include/mach/io.h20
-rw-r--r--arch/arm/mach-davinci/include/mach/irqs.h103
-rw-r--r--arch/arm/mach-davinci/include/mach/mux.h220
-rw-r--r--arch/arm/mach-davinci/include/mach/psc.h53
-rw-r--r--arch/arm/mach-davinci/include/mach/serial.h21
-rw-r--r--arch/arm/mach-davinci/io.c23
-rw-r--r--arch/arm/mach-davinci/irq.c156
-rw-r--r--arch/arm/mach-davinci/mux.c100
-rw-r--r--arch/arm/mach-davinci/mux.h51
-rw-r--r--arch/arm/mach-davinci/psc.c98
-rw-r--r--arch/arm/mach-davinci/serial.c95
-rw-r--r--arch/arm/mach-davinci/time.c103
-rw-r--r--arch/arm/mach-davinci/usb.c2
-rw-r--r--arch/arm/mach-ep93xx/clock.c69
-rw-r--r--arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h5
-rw-r--r--arch/arm/mach-integrator/core.c2
-rw-r--r--arch/arm/mach-ixp4xx/ixp4xx_npe.c2
-rw-r--r--arch/arm/mach-l7200/include/mach/sys-clock.h2
-rw-r--r--arch/arm/mach-omap1/board-h2-mmc.c14
-rw-r--r--arch/arm/mach-omap1/board-h3-mmc.c6
-rw-r--r--arch/arm/mach-omap1/board-h3.c101
-rw-r--r--arch/arm/mach-omap1/board-nokia770.c6
-rw-r--r--arch/arm/mach-omap1/mcbsp.c4
-rw-r--r--arch/arm/mach-omap2/board-h4.c95
-rw-r--r--arch/arm/mach-omap2/board-omap3beagle.c4
-rw-r--r--arch/arm/mach-omap2/board-rx51.c1
-rw-r--r--arch/arm/mach-omap2/clock24xx.c29
-rw-r--r--arch/arm/mach-omap2/clock24xx.h10
-rw-r--r--arch/arm/mach-omap2/clock34xx.c12
-rw-r--r--arch/arm/mach-omap2/clock34xx.h19
-rw-r--r--arch/arm/mach-omap2/devices.c39
-rw-r--r--arch/arm/mach-omap2/irq.c4
-rw-r--r--arch/arm/mach-omap2/prm-regbits-34xx.h2
-rw-r--r--arch/arm/mach-omap2/timer-gp.c48
-rw-r--r--arch/arm/mach-omap2/usb-tusb6010.c2
-rw-r--r--arch/arm/mach-pxa/Kconfig4
-rw-r--r--arch/arm/mach-pxa/corgi.c10
-rw-r--r--arch/arm/mach-pxa/littleton.c9
-rw-r--r--arch/arm/mach-pxa/spitz.c10
-rw-r--r--arch/arm/mach-pxa/viper.c1
-rw-r--r--arch/arm/mach-pxa/zylonite_pxa300.c5
-rw-r--r--arch/arm/mach-pxa/zylonite_pxa320.c1
-rw-r--r--arch/arm/mach-realview/core.c8
-rw-r--r--arch/arm/mach-realview/include/mach/smp.h11
-rw-r--r--arch/arm/mach-realview/localtimer.c6
-rw-r--r--arch/arm/mach-realview/platsmp.c15
-rw-r--r--arch/arm/mach-s3c2410/mach-bast.c3
-rw-r--r--arch/arm/mach-s3c2412/pm.c3
-rw-r--r--arch/arm/mach-s3c6400/include/mach/map.h2
-rw-r--r--arch/arm/mach-sa1100/lart.c1
-rw-r--r--arch/arm/mach-versatile/core.c2
-rw-r--r--arch/arm/mm/cache-v6.S33
-rw-r--r--arch/arm/mm/flush.c23
-rw-r--r--arch/arm/mm/proc-v7.S19
-rw-r--r--arch/arm/nwfpe/fpa11.h4
-rw-r--r--arch/arm/nwfpe/fpa11_cprt.c4
-rw-r--r--arch/arm/nwfpe/softfloat.h2
-rw-r--r--arch/arm/plat-mxc/dma-mx1-mx2.c17
-rw-r--r--arch/arm/plat-mxc/gpio.c2
-rw-r--r--arch/arm/plat-mxc/include/mach/board-mx27ads.h2
-rw-r--r--arch/arm/plat-omap/clock.c7
-rw-r--r--arch/arm/plat-omap/dma.c13
-rw-r--r--arch/arm/plat-omap/dmtimer.c28
-rw-r--r--arch/arm/plat-omap/fb.c5
-rw-r--r--arch/arm/plat-omap/gpio.c22
-rw-r--r--arch/arm/plat-omap/include/mach/dmtimer.h2
-rw-r--r--arch/arm/plat-omap/include/mach/eac.h100
-rw-r--r--arch/arm/plat-omap/include/mach/gpioexpander.h35
-rw-r--r--arch/arm/plat-omap/include/mach/irda.h4
-rw-r--r--arch/arm/plat-omap/include/mach/mmc.h1
-rw-r--r--arch/arm/plat-omap/include/mach/timer-gp.h17
-rw-r--r--arch/arm/plat-pxa/gpio.c23
-rw-r--r--arch/arm/plat-s3c/clock.c2
-rw-r--r--arch/arm/plat-s3c24xx/dma.c2
-rw-r--r--arch/arm/plat-s3c64xx/gpiolib.c2
-rw-r--r--arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h20
-rw-r--r--arch/avr32/Makefile2
-rw-r--r--arch/cris/Makefile14
-rw-r--r--arch/cris/arch-v10/boot/compressed/README25
-rw-r--r--arch/cris/arch-v10/boot/compressed/misc.c246
-rw-r--r--arch/cris/arch-v10/kernel/entry.S14
-rw-r--r--arch/cris/arch-v32/boot/Makefile20
-rw-r--r--arch/cris/arch-v32/boot/compressed/Makefile26
-rw-r--r--arch/cris/arch-v32/boot/rescue/Makefile26
-rw-r--r--arch/cris/arch-v32/drivers/mach-a3/gpio.c4
-rw-r--r--arch/cris/arch-v32/kernel/Makefile2
-rw-r--r--arch/cris/arch-v32/kernel/entry.S8
-rw-r--r--arch/cris/boot/.gitignore (renamed from arch/cris/arch-v10/boot/.gitignore)0
-rw-r--r--arch/cris/boot/Makefile (renamed from arch/cris/arch-v10/boot/Makefile)8
-rw-r--r--arch/cris/boot/compressed/Makefile (renamed from arch/cris/arch-v10/boot/compressed/Makefile)19
-rw-r--r--arch/cris/boot/compressed/README (renamed from arch/cris/arch-v32/boot/compressed/README)0
-rw-r--r--arch/cris/boot/compressed/decompress_v10.lds (renamed from arch/cris/arch-v10/boot/compressed/decompress.lds)0
-rw-r--r--arch/cris/boot/compressed/decompress_v32.lds (renamed from arch/cris/arch-v32/boot/compressed/decompress.lds)0
-rw-r--r--arch/cris/boot/compressed/head_v10.S (renamed from arch/cris/arch-v10/boot/compressed/head.S)4
-rw-r--r--arch/cris/boot/compressed/head_v32.S (renamed from arch/cris/arch-v32/boot/compressed/head.S)10
-rw-r--r--arch/cris/boot/compressed/misc.c (renamed from arch/cris/arch-v32/boot/compressed/misc.c)193
-rw-r--r--arch/cris/boot/rescue/Makefile (renamed from arch/cris/arch-v10/boot/rescue/Makefile)22
-rw-r--r--arch/cris/boot/rescue/head_v10.S (renamed from arch/cris/arch-v10/boot/rescue/head.S)2
-rw-r--r--arch/cris/boot/rescue/head_v32.S (renamed from arch/cris/arch-v32/boot/rescue/head.S)0
-rw-r--r--arch/cris/boot/rescue/kimagerescue.S (renamed from arch/cris/arch-v10/boot/rescue/kimagerescue.S)0
-rw-r--r--arch/cris/boot/rescue/rescue_v10.lds (renamed from arch/cris/arch-v10/boot/rescue/rescue.lds)0
-rw-r--r--arch/cris/boot/rescue/rescue_v32.lds (renamed from arch/cris/arch-v32/boot/rescue/rescue.lds)0
-rw-r--r--arch/cris/boot/rescue/testrescue.S (renamed from arch/cris/arch-v10/boot/rescue/testrescue.S)0
-rw-r--r--arch/cris/boot/tools/build.c (renamed from arch/cris/arch-v10/boot/tools/build.c)0
-rw-r--r--arch/cris/include/asm/unistd.h12
-rw-r--r--arch/ia64/include/asm/idle.h7
-rw-r--r--arch/ia64/include/asm/xen/events.h7
-rw-r--r--arch/ia64/xen/xensetup.S2
-rw-r--r--arch/m32r/boot/compressed/Makefile1
-rw-r--r--arch/m32r/include/asm/assembler.h7
-rw-r--r--arch/m32r/kernel/Makefile2
-rw-r--r--arch/microblaze/configs/nommu_defconfig50
-rw-r--r--arch/microblaze/include/asm/of_platform.h10
-rw-r--r--arch/microblaze/kernel/cpu/cpuinfo-static.c4
-rw-r--r--arch/microblaze/kernel/intc.c4
-rw-r--r--arch/microblaze/kernel/sys_microblaze.c2
-rw-r--r--arch/mips/Kconfig20
-rw-r--r--arch/mips/Makefile11
-rw-r--r--arch/mips/alchemy/common/time.c2
-rw-r--r--arch/mips/cavium-octeon/csrc-octeon.c2
-rw-r--r--arch/mips/include/asm/bitops.h4
-rw-r--r--arch/mips/include/asm/checksum.h4
-rw-r--r--arch/mips/include/asm/compat.h1
-rw-r--r--arch/mips/include/asm/cpu-features.h9
-rw-r--r--arch/mips/include/asm/div64.h142
-rw-r--r--arch/mips/include/asm/dma-mapping.h9
-rw-r--r--arch/mips/include/asm/fixmap.h3
-rw-r--r--arch/mips/include/asm/hazards.h5
-rw-r--r--arch/mips/include/asm/highmem.h6
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1000.h6
-rw-r--r--arch/mips/include/asm/mach-au1x00/au1xxx_ide.h17
-rw-r--r--arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h59
-rw-r--r--arch/mips/include/asm/mipsregs.h38
-rw-r--r--arch/mips/include/asm/page.h3
-rw-r--r--arch/mips/include/asm/pgtable-64.h6
-rw-r--r--arch/mips/include/asm/sn/addrs.h4
-rw-r--r--arch/mips/include/asm/sn/nmi.h4
-rw-r--r--arch/mips/include/asm/thread_info.h3
-rw-r--r--arch/mips/include/asm/time.h6
-rw-r--r--arch/mips/include/asm/uaccess.h68
-rw-r--r--arch/mips/kernel/cevt-smtc.c2
-rw-r--r--arch/mips/kernel/scall64-n32.S4
-rw-r--r--arch/mips/kernel/scall64-o32.S4
-rw-r--r--arch/mips/kernel/unaligned.c6
-rw-r--r--arch/mips/lib/dump_tlb.c9
-rw-r--r--arch/mips/mm/c-r4k.c2
-rw-r--r--arch/mips/mm/dma-default.c19
-rw-r--r--arch/mips/mm/highmem.c25
-rw-r--r--arch/mips/mm/init.c26
-rw-r--r--arch/mips/mm/sc-rm7k.c4
-rw-r--r--arch/mips/mm/tlb-r3k.c6
-rw-r--r--arch/mips/mm/tlb-r4k.c6
-rw-r--r--arch/mips/mm/tlb-r8k.c3
-rw-r--r--arch/mips/pmc-sierra/Kconfig12
-rw-r--r--arch/mips/pmc-sierra/msp71xx/msp_prom.c60
-rw-r--r--arch/mips/pmc-sierra/msp71xx/msp_setup.c8
-rw-r--r--arch/mips/pmc-sierra/msp71xx/msp_time.c7
-rw-r--r--arch/mips/sgi-ip22/ip22-reset.c2
-rw-r--r--arch/mips/sgi-ip32/ip32-berr.c2
-rw-r--r--arch/mips/sgi-ip32/ip32-irq.c4
-rw-r--r--arch/mips/sgi-ip32/ip32-reset.c9
-rw-r--r--arch/mips/sibyte/bcm1480/irq.c7
-rw-r--r--arch/mips/sibyte/sb1250/irq.c7
-rw-r--r--arch/mips/txx9/generic/setup_tx4927.c2
-rw-r--r--arch/mips/txx9/generic/setup_tx4938.c2
-rw-r--r--arch/mips/txx9/generic/setup_tx4939.c2
-rw-r--r--arch/mips/txx9/rbtx4939/setup.c2
-rw-r--r--arch/powerpc/Kconfig4
-rw-r--r--arch/powerpc/boot/Makefile69
-rw-r--r--arch/powerpc/boot/mktree.c10
-rw-r--r--arch/powerpc/boot/simpleboot.c2
-rw-r--r--arch/powerpc/configs/83xx/asp8347_defconfig104
-rw-r--r--arch/powerpc/configs/83xx/mpc8313_rdb_defconfig114
-rw-r--r--arch/powerpc/configs/83xx/mpc8315_rdb_defconfig114
-rw-r--r--arch/powerpc/configs/83xx/mpc832x_mds_defconfig107
-rw-r--r--arch/powerpc/configs/83xx/mpc832x_rdb_defconfig113
-rw-r--r--arch/powerpc/configs/83xx/mpc834x_itx_defconfig108
-rw-r--r--arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig108
-rw-r--r--arch/powerpc/configs/83xx/mpc834x_mds_defconfig103
-rw-r--r--arch/powerpc/configs/83xx/mpc836x_mds_defconfig108
-rw-r--r--arch/powerpc/configs/83xx/mpc836x_rdk_defconfig96
-rw-r--r--arch/powerpc/configs/83xx/mpc837x_mds_defconfig104
-rw-r--r--arch/powerpc/configs/83xx/mpc837x_rdb_defconfig111
-rw-r--r--arch/powerpc/configs/83xx/sbc834x_defconfig96
-rw-r--r--arch/powerpc/configs/85xx/ksi8560_defconfig86
-rw-r--r--arch/powerpc/configs/85xx/mpc8540_ads_defconfig82
-rw-r--r--arch/powerpc/configs/85xx/mpc8560_ads_defconfig89
-rw-r--r--arch/powerpc/configs/85xx/mpc85xx_cds_defconfig88
-rw-r--r--arch/powerpc/configs/85xx/sbc8548_defconfig84
-rw-r--r--arch/powerpc/configs/85xx/sbc8560_defconfig83
-rw-r--r--arch/powerpc/configs/85xx/socrates_defconfig385
-rw-r--r--arch/powerpc/configs/85xx/stx_gp3_defconfig105
-rw-r--r--arch/powerpc/configs/85xx/tqm8540_defconfig100
-rw-r--r--arch/powerpc/configs/85xx/tqm8541_defconfig101
-rw-r--r--arch/powerpc/configs/85xx/tqm8548_defconfig64
-rw-r--r--arch/powerpc/configs/85xx/tqm8555_defconfig101
-rw-r--r--arch/powerpc/configs/85xx/tqm8560_defconfig101
-rw-r--r--arch/powerpc/configs/86xx/gef_ppc9a_defconfig92
-rw-r--r--arch/powerpc/configs/86xx/gef_sbc310_defconfig92
-rw-r--r--arch/powerpc/configs/86xx/gef_sbc610_defconfig122
-rw-r--r--arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig100
-rw-r--r--arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig211
-rw-r--r--arch/powerpc/configs/86xx/sbc8641d_defconfig114
-rw-r--r--arch/powerpc/configs/adder875_defconfig65
-rw-r--r--arch/powerpc/configs/c2k_defconfig128
-rw-r--r--arch/powerpc/configs/ep8248e_defconfig74
-rw-r--r--arch/powerpc/configs/ep88xc_defconfig63
-rw-r--r--arch/powerpc/configs/linkstation_defconfig96
-rw-r--r--arch/powerpc/configs/mgcoge_defconfig74
-rw-r--r--arch/powerpc/configs/mgsuvd_defconfig72
-rw-r--r--arch/powerpc/configs/mpc7448_hpc2_defconfig91
-rw-r--r--arch/powerpc/configs/mpc8272_ads_defconfig77
-rw-r--r--arch/powerpc/configs/mpc83xx_defconfig115
-rw-r--r--arch/powerpc/configs/mpc866_ads_defconfig77
-rw-r--r--arch/powerpc/configs/mpc86xx_defconfig211
-rw-r--r--arch/powerpc/configs/mpc885_ads_defconfig63
-rw-r--r--arch/powerpc/configs/pq2fads_defconfig90
-rw-r--r--arch/powerpc/configs/prpmc2800_defconfig120
-rw-r--r--arch/powerpc/configs/ps3_defconfig105
-rw-r--r--arch/powerpc/configs/storcenter_defconfig71
-rw-r--r--arch/powerpc/include/asm/iseries/iommu.h4
-rw-r--r--arch/powerpc/include/asm/of_platform.h10
-rw-r--r--arch/powerpc/include/asm/system.h2
-rw-r--r--arch/powerpc/kernel/cputable.c15
-rw-r--r--arch/powerpc/kernel/ftrace.c22
-rw-r--r--arch/powerpc/kernel/machine_kexec.c4
-rw-r--r--arch/powerpc/kernel/pci-common.c21
-rw-r--r--arch/powerpc/kernel/pci_64.c15
-rw-r--r--arch/powerpc/kernel/prom.c8
-rw-r--r--arch/powerpc/kernel/vmlinux.lds.S1
-rw-r--r--arch/powerpc/mm/mem.c2
-rw-r--r--arch/powerpc/mm/pgtable.c3
-rw-r--r--arch/powerpc/oprofile/op_model_power4.c9
-rw-r--r--arch/powerpc/platforms/40x/Kconfig1
-rw-r--r--arch/powerpc/platforms/44x/Kconfig1
-rw-r--r--arch/powerpc/platforms/cell/ras.c17
-rw-r--r--arch/powerpc/platforms/iseries/Kconfig1
-rw-r--r--arch/powerpc/platforms/iseries/iommu.c6
-rw-r--r--arch/powerpc/platforms/iseries/pci.c1
-rw-r--r--arch/powerpc/platforms/maple/pci.c14
-rw-r--r--arch/powerpc/sysdev/fsl_soc.c46
-rw-r--r--arch/powerpc/sysdev/mpic.c16
-rw-r--r--arch/powerpc/sysdev/xilinx_intc.c117
-rw-r--r--arch/sh/boards/board-ap325rxa.c3
-rw-r--r--arch/x86/Kconfig13
-rw-r--r--arch/x86/include/asm/mce.h1
-rw-r--r--arch/x86/include/asm/paravirt.h2
-rw-r--r--arch/x86/include/asm/percpu.h10
-rw-r--r--arch/x86/include/asm/ptrace.h7
-rw-r--r--arch/x86/include/asm/spinlock.h4
-rw-r--r--arch/x86/kernel/Makefile3
-rw-r--r--arch/x86/kernel/amd_iommu_init.c16
-rw-r--r--arch/x86/kernel/apic/es7000_32.c8
-rw-r--r--arch/x86/kernel/cpu/common.c2
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce_64.c33
-rw-r--r--arch/x86/kernel/cpu/mcheck/mce_intel_64.c10
-rw-r--r--arch/x86/kernel/cpu/mtrr/generic.c6
-rw-r--r--arch/x86/kernel/cpu/proc.c2
-rw-r--r--arch/x86/kernel/e820.c11
-rw-r--r--arch/x86/kernel/ftrace.c2
-rw-r--r--arch/x86/kernel/kgdb.c3
-rw-r--r--arch/x86/kernel/machine_kexec_32.c4
-rw-r--r--arch/x86/kernel/machine_kexec_64.c4
-rw-r--r--arch/x86/kernel/paravirt.c2
-rw-r--r--arch/x86/kvm/svm.c8
-rw-r--r--arch/x86/kvm/x86.c6
-rw-r--r--arch/x86/mm/init.c18
-rw-r--r--arch/x86/mm/kmmio.c2
-rw-r--r--arch/x86/mm/srat_32.c2
-rw-r--r--arch/x86/mm/srat_64.c1
-rw-r--r--arch/x86/oprofile/backtrace.c2
-rw-r--r--arch/x86/vdso/vclock_gettime.c12
-rw-r--r--arch/x86/xen/Makefile5
-rw-r--r--arch/x86/xen/mmu.c6
-rw-r--r--arch/x86/xen/xen-ops.h19
-rw-r--r--arch/xtensa/Kconfig7
-rw-r--r--arch/xtensa/configs/s6105_defconfig3
-rw-r--r--arch/xtensa/include/asm/checksum.h6
-rw-r--r--arch/xtensa/include/asm/timex.h4
-rw-r--r--arch/xtensa/kernel/Makefile21
-rw-r--r--arch/xtensa/kernel/traps.c16
-rw-r--r--arch/xtensa/kernel/vmlinux.lds.S4
-rw-r--r--arch/xtensa/platforms/s6105/setup.c3
-rw-r--r--arch/xtensa/variants/s6000/Makefile1
-rw-r--r--arch/xtensa/variants/s6000/delay.c27
-rw-r--r--arch/xtensa/variants/s6000/gpio.c3
-rw-r--r--arch/xtensa/variants/s6000/include/variant/gpio.h6
-rw-r--r--block/blk-core.c4
-rw-r--r--crypto/api.c3
-rw-r--r--crypto/eseqiv.c3
-rw-r--r--drivers/acpi/acpica/Makefile27
-rw-r--r--drivers/acpi/acpica/aclocal.h7
-rw-r--r--drivers/acpi/acpica/rscalc.c7
-rw-r--r--drivers/acpi/bus.c2
-rw-r--r--drivers/acpi/processor_idle.c42
-rw-r--r--drivers/acpi/processor_throttling.c25
-rw-r--r--drivers/acpi/video.c38
-rw-r--r--drivers/ata/ata_piix.c18
-rw-r--r--drivers/ata/libata-core.c4
-rw-r--r--drivers/ata/libata-eh.c34
-rw-r--r--drivers/ata/libata-scsi.c38
-rw-r--r--drivers/ata/pata_pdc202xx_old.c6
-rw-r--r--drivers/ata/sata_fsl.c15
-rw-r--r--drivers/ata/sata_mv.c69
-rw-r--r--drivers/ata/sata_sx4.c180
-rw-r--r--drivers/base/iommu.c2
-rw-r--r--drivers/base/platform.c22
-rw-r--r--drivers/block/xen-blkfront.c10
-rw-r--r--drivers/cdrom/viocd.c2
-rw-r--r--drivers/char/ipmi/ipmi_msghandler.c13
-rw-r--r--drivers/char/random.c19
-rw-r--r--drivers/char/sysrq.c4
-rw-r--r--drivers/char/tpm/tpm_bios.c3
-rw-r--r--drivers/char/vt_ioctl.c6
-rw-r--r--drivers/crypto/ixp4xx_crypto.c33
-rw-r--r--drivers/crypto/padlock-aes.c2
-rw-r--r--drivers/dma/dmaengine.c17
-rw-r--r--drivers/dma/dmatest.c4
-rw-r--r--drivers/dma/ioat_dma.c45
-rw-r--r--drivers/dma/ipu/ipu_idmac.c7
-rw-r--r--drivers/firmware/iscsi_ibft.c4
-rw-r--r--drivers/gpu/drm/Kconfig7
-rw-r--r--drivers/gpu/drm/drm_bufs.c8
-rw-r--r--drivers/gpu/drm/drm_crtc_helper.c19
-rw-r--r--drivers/gpu/drm/drm_drv.c5
-rw-r--r--drivers/gpu/drm/drm_stub.c15
-rw-r--r--drivers/gpu/drm/drm_sysfs.c2
-rw-r--r--drivers/gpu/drm/i915/i915_dma.c13
-rw-r--r--drivers/gpu/drm/i915/i915_drv.h11
-rw-r--r--drivers/gpu/drm/i915/i915_gem.c9
-rw-r--r--drivers/gpu/drm/i915/i915_reg.h1
-rw-r--r--drivers/gpu/drm/i915/i915_suspend.c24
-rw-r--r--drivers/gpu/drm/i915/intel_crt.c2
-rw-r--r--drivers/gpu/drm/i915/intel_display.c31
-rw-r--r--drivers/gpu/drm/i915/intel_drv.h4
-rw-r--r--drivers/gpu/drm/i915/intel_fb.c4
-rw-r--r--drivers/gpu/drm/i915/intel_hdmi.c17
-rw-r--r--drivers/gpu/drm/i915/intel_i2c.c17
-rw-r--r--drivers/gpu/drm/i915/intel_lvds.c54
-rw-r--r--drivers/gpu/drm/i915/intel_modes.c6
-rw-r--r--drivers/gpu/drm/r128/r128_cce.c6
-rw-r--r--drivers/gpu/drm/radeon/radeon_drv.h3
-rw-r--r--drivers/hid/hid-apple.c2
-rw-r--r--drivers/hid/hid-core.c4
-rw-r--r--drivers/hid/hid-ids.h6
-rw-r--r--drivers/hid/hid-lg.c2
-rw-r--r--drivers/hid/hidraw.c12
-rw-r--r--drivers/hid/usbhid/hid-core.c4
-rw-r--r--drivers/hid/usbhid/hid-quirks.c3
-rw-r--r--drivers/hwmon/asus_atk0110.c2
-rw-r--r--drivers/hwmon/w83781d.c3
-rw-r--r--drivers/i2c/algos/i2c-algo-bit.c2
-rw-r--r--drivers/i2c/algos/i2c-algo-pca.c11
-rw-r--r--drivers/i2c/busses/Kconfig2
-rw-r--r--drivers/i2c/busses/i2c-ali1535.c2
-rw-r--r--drivers/i2c/busses/i2c-ali15x3.c2
-rw-r--r--drivers/i2c/busses/i2c-amd756.c4
-rw-r--r--drivers/i2c/busses/i2c-cpm.c16
-rw-r--r--drivers/i2c/busses/i2c-i801.c8
-rw-r--r--drivers/i2c/busses/i2c-isch.c2
-rw-r--r--drivers/i2c/busses/i2c-mpc.c34
-rw-r--r--drivers/i2c/busses/i2c-nforce2.c2
-rw-r--r--drivers/i2c/busses/i2c-pxa.c6
-rw-r--r--drivers/i2c/busses/i2c-sis5595.c2
-rw-r--r--drivers/i2c/busses/i2c-sis630.c2
-rw-r--r--drivers/i2c/busses/i2c-sis96x.c2
-rw-r--r--drivers/ide/icside.c2
-rw-r--r--drivers/ide/ide-cd.c9
-rw-r--r--drivers/ide/ide-io.c4
-rw-r--r--drivers/ide/ide-iops.c21
-rw-r--r--drivers/ide/ide-lib.c27
-rw-r--r--drivers/ide/ide-probe.c9
-rw-r--r--drivers/ide/ide-tape.c6
-rw-r--r--drivers/ide/piix.c1
-rw-r--r--drivers/ide/via82cxxx.c2
-rw-r--r--drivers/infiniband/hw/cxgb3/cxio_hal.c1
-rw-r--r--drivers/infiniband/hw/ipath/ipath_fs.c2
-rw-r--r--drivers/infiniband/hw/mlx4/mlx4_ib.h1
-rw-r--r--drivers/infiniband/hw/mlx4/mr.c10
-rw-r--r--drivers/infiniband/hw/mlx4/qp.c2
-rw-r--r--drivers/infiniband/ulp/iser/iscsi_iser.c1
-rw-r--r--drivers/input/ff-memless.c2
-rw-r--r--drivers/input/input.c36
-rw-r--r--drivers/input/joydev.c8
-rw-r--r--drivers/input/keyboard/atkbd.c16
-rw-r--r--drivers/input/keyboard/omap-keypad.c16
-rw-r--r--drivers/input/mouse/alps.c1
-rw-r--r--drivers/input/mouse/appletouch.c24
-rw-r--r--drivers/input/mouse/bcm5974.c108
-rw-r--r--drivers/input/mouse/elantech.c48
-rw-r--r--drivers/input/mouse/elantech.h5
-rw-r--r--drivers/input/mouse/lifebook.c6
-rw-r--r--drivers/input/serio/ambakmi.c2
-rw-r--r--drivers/input/serio/sa1111ps2.c2
-rw-r--r--drivers/input/tablet/wacom.h5
-rw-r--r--drivers/input/tablet/wacom_sys.c13
-rw-r--r--drivers/input/touchscreen/tsc2007.c7
-rw-r--r--drivers/input/touchscreen/ucb1400_ts.c2
-rw-r--r--drivers/isdn/capi/capifs.c11
-rw-r--r--drivers/md/bitmap.c29
-rw-r--r--drivers/md/md.c70
-rw-r--r--drivers/md/raid10.c12
-rw-r--r--drivers/media/radio/radio-sf16fmi.c2
-rw-r--r--drivers/media/radio/radio-sf16fmr2.c2
-rw-r--r--drivers/media/video/cafe_ccic.c1
-rw-r--r--drivers/media/video/cx23885/cx23885-dvb.c2
-rw-r--r--drivers/media/video/ivtv/ivtv-driver.c9
-rw-r--r--drivers/media/video/ivtv/ivtv-gpio.c4
-rw-r--r--drivers/media/video/ivtv/ivtv-ioctl.c5
-rw-r--r--drivers/media/video/ivtv/ivtv-irq.c2
-rw-r--r--drivers/media/video/ivtv/ivtv-yuv.c3
-rw-r--r--drivers/media/video/ivtv/ivtvfb.c3
-rw-r--r--drivers/media/video/uvc/uvc_driver.c9
-rw-r--r--drivers/media/video/uvc/uvc_video.c2
-rw-r--r--drivers/media/video/v4l2-ioctl.c45
-rw-r--r--drivers/media/video/zoran/zoran_driver.c28
-rw-r--r--drivers/mfd/pcf50633-core.c2
-rw-r--r--drivers/mfd/wm8350-core.c8
-rw-r--r--drivers/misc/enclosure.c6
-rw-r--r--drivers/misc/isl29003.c9
-rw-r--r--drivers/mmc/card/block.c8
-rw-r--r--drivers/mmc/core/core.c4
-rw-r--r--drivers/mmc/host/mmci.c4
-rw-r--r--drivers/mmc/host/mvsdio.c11
-rw-r--r--drivers/mmc/host/omap.c2
-rw-r--r--drivers/mmc/host/sdhci-pci.c8
-rw-r--r--drivers/mmc/host/sdhci.h2
-rw-r--r--drivers/mtd/devices/m25p80.c26
-rw-r--r--drivers/mtd/devices/mtd_dataflash.c2
-rw-r--r--drivers/mtd/mtdcore.c18
-rw-r--r--drivers/mtd/mtdsuper.c3
-rw-r--r--drivers/net/arm/ixp4xx_eth.c31
-rw-r--r--drivers/net/benet/be.h14
-rw-r--r--drivers/net/benet/be_main.c10
-rw-r--r--drivers/net/bnx2.c6
-rw-r--r--drivers/net/bonding/bond_3ad.c11
-rw-r--r--drivers/net/bonding/bond_alb.c12
-rw-r--r--drivers/net/bonding/bond_main.c44
-rw-r--r--drivers/net/cxgb3/t3_hw.c2
-rw-r--r--drivers/net/e1000/e1000_main.c2
-rw-r--r--drivers/net/ehea/ehea.h2
-rw-r--r--drivers/net/ehea/ehea_main.c31
-rw-r--r--drivers/net/igb/igb_main.c12
-rw-r--r--drivers/net/meth.c27
-rw-r--r--drivers/net/mlx4/en_cq.c4
-rw-r--r--drivers/net/mlx4/en_rx.c1
-rw-r--r--drivers/net/mv643xx_eth.c65
-rw-r--r--drivers/net/ne2k-pci.c7
-rw-r--r--drivers/net/netconsole.c11
-rw-r--r--drivers/net/usb/Kconfig14
-rw-r--r--drivers/net/usb/Makefile1
-rw-r--r--drivers/net/usb/cdc_eem.c381
-rw-r--r--drivers/net/usb/smsc95xx.c15
-rw-r--r--drivers/net/usb/smsc95xx.h3
-rw-r--r--drivers/net/virtio_net.c24
-rw-r--r--drivers/net/vxge/vxge-traffic.c2
-rw-r--r--drivers/net/wan/ixp4xx_hss.c4
-rw-r--r--drivers/net/wimax/i2400m/rx.c5
-rw-r--r--drivers/net/wireless/airo.c10
-rw-r--r--drivers/net/wireless/ath5k/base.c22
-rw-r--r--drivers/net/wireless/ath5k/debug.c2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-6000.c8
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-agn.c2
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-scan.c4
-rw-r--r--drivers/net/wireless/iwlwifi/iwl-sta.c21
-rw-r--r--drivers/net/wireless/iwlwifi/iwl3945-base.c2
-rw-r--r--drivers/net/wireless/rndis_wlan.c14
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187.h57
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187_dev.c13
-rw-r--r--drivers/net/wireless/rtl818x/rtl8187_rtl8225.c8
-rw-r--r--drivers/pci/intel-iommu.c13
-rw-r--r--drivers/pci/msi.c8
-rw-r--r--drivers/pci/pci.c3
-rw-r--r--drivers/pci/pcie/aer/aerdrv.h3
-rw-r--r--drivers/pci/pcie/portdrv_pci.c2
-rw-r--r--drivers/platform/x86/asus-laptop.c6
-rw-r--r--drivers/platform/x86/eeepc-laptop.c47
-rw-r--r--drivers/pnp/pnpacpi/core.c8
-rw-r--r--drivers/regulator/da903x.c2
-rw-r--r--drivers/rtc/rtc-pl030.c2
-rw-r--r--drivers/rtc/rtc-pl031.c2
-rw-r--r--drivers/rtc/rtc-twl4030.c4
-rw-r--r--drivers/s390/scsi/zfcp_aux.c11
-rw-r--r--drivers/s390/scsi/zfcp_ccw.c1
-rw-r--r--drivers/s390/scsi/zfcp_cfdc.c3
-rw-r--r--drivers/s390/scsi/zfcp_def.h2
-rw-r--r--drivers/s390/scsi/zfcp_erp.c60
-rw-r--r--drivers/s390/scsi/zfcp_ext.h2
-rw-r--r--drivers/s390/scsi/zfcp_fc.c33
-rw-r--r--drivers/s390/scsi/zfcp_fsf.c59
-rw-r--r--drivers/s390/scsi/zfcp_scsi.c44
-rw-r--r--drivers/s390/scsi/zfcp_sysfs.c21
-rw-r--r--drivers/scsi/3w-9xxx.c3
-rw-r--r--drivers/scsi/3w-xxxx.c5
-rw-r--r--drivers/scsi/3w-xxxx.h2
-rw-r--r--drivers/scsi/Kconfig11
-rw-r--r--drivers/scsi/Makefile1
-rw-r--r--drivers/scsi/cxgb3i/cxgb3i.h2
-rw-r--r--drivers/scsi/cxgb3i/cxgb3i_ddp.c32
-rw-r--r--drivers/scsi/cxgb3i/cxgb3i_iscsi.c5
-rw-r--r--drivers/scsi/cxgb3i/cxgb3i_offload.c4
-rw-r--r--drivers/scsi/cxgb3i/cxgb3i_pdu.c19
-rw-r--r--drivers/scsi/fcoe/fcoe.c59
-rw-r--r--drivers/scsi/fcoe/libfcoe.c2
-rw-r--r--drivers/scsi/fnic/Makefile15
-rw-r--r--drivers/scsi/fnic/cq_desc.h78
-rw-r--r--drivers/scsi/fnic/cq_enet_desc.h167
-rw-r--r--drivers/scsi/fnic/cq_exch_desc.h182
-rw-r--r--drivers/scsi/fnic/fcpio.h780
-rw-r--r--drivers/scsi/fnic/fnic.h265
-rw-r--r--drivers/scsi/fnic/fnic_attrs.c56
-rw-r--r--drivers/scsi/fnic/fnic_fcs.c742
-rw-r--r--drivers/scsi/fnic/fnic_io.h67
-rw-r--r--drivers/scsi/fnic/fnic_isr.c332
-rw-r--r--drivers/scsi/fnic/fnic_main.c942
-rw-r--r--drivers/scsi/fnic/fnic_res.c444
-rw-r--r--drivers/scsi/fnic/fnic_res.h197
-rw-r--r--drivers/scsi/fnic/fnic_scsi.c1850
-rw-r--r--drivers/scsi/fnic/rq_enet_desc.h58
-rw-r--r--drivers/scsi/fnic/vnic_cq.c85
-rw-r--r--drivers/scsi/fnic/vnic_cq.h121
-rw-r--r--drivers/scsi/fnic/vnic_cq_copy.h62
-rw-r--r--drivers/scsi/fnic/vnic_dev.c690
-rw-r--r--drivers/scsi/fnic/vnic_dev.h161
-rw-r--r--drivers/scsi/fnic/vnic_devcmd.h281
-rw-r--r--drivers/scsi/fnic/vnic_intr.c60
-rw-r--r--drivers/scsi/fnic/vnic_intr.h118
-rw-r--r--drivers/scsi/fnic/vnic_nic.h69
-rw-r--r--drivers/scsi/fnic/vnic_resource.h61
-rw-r--r--drivers/scsi/fnic/vnic_rq.c196
-rw-r--r--drivers/scsi/fnic/vnic_rq.h235
-rw-r--r--drivers/scsi/fnic/vnic_scsi.h99
-rw-r--r--drivers/scsi/fnic/vnic_stats.h68
-rw-r--r--drivers/scsi/fnic/vnic_wq.c182
-rw-r--r--drivers/scsi/fnic/vnic_wq.h175
-rw-r--r--drivers/scsi/fnic/vnic_wq_copy.c117
-rw-r--r--drivers/scsi/fnic/vnic_wq_copy.h128
-rw-r--r--drivers/scsi/fnic/wq_enet_desc.h96
-rw-r--r--drivers/scsi/ipr.c13
-rw-r--r--drivers/scsi/iscsi_tcp.c3
-rw-r--r--drivers/scsi/libfc/fc_disc.c54
-rw-r--r--drivers/scsi/libfc/fc_elsct.c2
-rw-r--r--drivers/scsi/libfc/fc_fcp.c7
-rw-r--r--drivers/scsi/libfc/fc_lport.c74
-rw-r--r--drivers/scsi/libfc/fc_rport.c82
-rw-r--r--drivers/scsi/libiscsi.c10
-rw-r--r--drivers/scsi/libiscsi_tcp.c5
-rw-r--r--drivers/scsi/lpfc/lpfc.h2
-rw-r--r--drivers/scsi/lpfc/lpfc_attr.c266
-rw-r--r--drivers/scsi/lpfc/lpfc_crtn.h2
-rw-r--r--drivers/scsi/lpfc/lpfc_debugfs.c45
-rw-r--r--drivers/scsi/lpfc/lpfc_disc.h1
-rw-r--r--drivers/scsi/lpfc/lpfc_els.c245
-rw-r--r--drivers/scsi/lpfc/lpfc_hbadisc.c88
-rw-r--r--drivers/scsi/lpfc/lpfc_init.c205
-rw-r--r--drivers/scsi/lpfc/lpfc_logmsg.h2
-rw-r--r--drivers/scsi/lpfc/lpfc_mbox.c63
-rw-r--r--drivers/scsi/lpfc/lpfc_mem.c19
-rw-r--r--drivers/scsi/lpfc/lpfc_nportdisc.c18
-rw-r--r--drivers/scsi/lpfc/lpfc_scsi.c126
-rw-r--r--drivers/scsi/lpfc/lpfc_sli.c401
-rw-r--r--drivers/scsi/lpfc/lpfc_version.h6
-rw-r--r--drivers/scsi/lpfc/lpfc_vport.c10
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_base.c75
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_base.h32
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_ctl.c216
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_ctl.h7
-rw-r--r--drivers/scsi/mpt2sas/mpt2sas_scsih.c29
-rw-r--r--drivers/scsi/osd/osd_initiator.c125
-rw-r--r--drivers/scsi/osd/osd_uld.c20
-rw-r--r--drivers/scsi/scsi_lib.c4
-rw-r--r--drivers/scsi/scsi_scan.c1
-rw-r--r--drivers/scsi/scsi_transport_iscsi.c2
-rw-r--r--drivers/scsi/sd.c15
-rw-r--r--drivers/scsi/sg.c13
-rw-r--r--drivers/scsi/sr_ioctl.c5
-rw-r--r--drivers/serial/amba-pl010.c2
-rw-r--r--drivers/serial/amba-pl011.c2
-rw-r--r--drivers/serial/crisv10.c173
-rw-r--r--drivers/serial/icom.c2
-rw-r--r--drivers/serial/jsm/jsm.h2
-rw-r--r--drivers/serial/jsm/jsm_driver.c1
-rw-r--r--drivers/serial/nwpserial.c4
-rw-r--r--drivers/serial/s3c6400.c1
-rw-r--r--drivers/serial/samsung.c61
-rw-r--r--drivers/serial/samsung.h4
-rw-r--r--drivers/spi/pxa2xx_spi.c3
-rw-r--r--drivers/staging/comedi/TODO1
-rw-r--r--drivers/staging/rt2870/rt2870.h1
-rw-r--r--drivers/staging/rtl8187se/r8180.h2
-rw-r--r--drivers/staging/rtl8187se/r8180_core.c46
-rw-r--r--drivers/staging/winbond/wbusb.c9
-rw-r--r--drivers/thermal/thermal_sys.c8
-rw-r--r--drivers/usb/Makefile2
-rw-r--r--drivers/usb/atm/cxacru.c10
-rw-r--r--drivers/usb/gadget/usbstring.c6
-rw-r--r--drivers/usb/serial/ftdi_sio.c27
-rw-r--r--drivers/usb/serial/ftdi_sio.h6
-rw-r--r--drivers/usb/storage/unusual_devs.h5
-rw-r--r--drivers/video/Kconfig23
-rw-r--r--drivers/video/Makefile1
-rw-r--r--drivers/video/amba-clcd.c2
-rw-r--r--drivers/video/cfbfillrect.c36
-rw-r--r--drivers/video/console/vgacon.c2
-rw-r--r--drivers/video/fb_draw.h21
-rw-r--r--drivers/video/gbefb.c14
-rw-r--r--drivers/video/mx3fb.c14
-rw-r--r--drivers/video/omap/dispc.c14
-rw-r--r--drivers/video/omap/rfbi.c8
-rw-r--r--drivers/video/sh_mobile_lcdcfb.c7
-rw-r--r--drivers/video/sysfillrect.c30
-rw-r--r--drivers/video/via/viafbdev.c6
-rw-r--r--drivers/xen/balloon.c3
-rw-r--r--fs/9p/vfs_super.c12
-rw-r--r--fs/affs/super.c3
-rw-r--r--fs/afs/super.c7
-rw-r--r--fs/autofs4/expire.c4
-rw-r--r--fs/binfmt_elf_fdpic.c4
-rw-r--r--fs/btrfs/ctree.c39
-rw-r--r--fs/btrfs/disk-io.c2
-rw-r--r--fs/btrfs/extent-tree.c2
-rw-r--r--fs/btrfs/inode.c2
-rw-r--r--fs/btrfs/ioctl.c4
-rw-r--r--fs/btrfs/super.c16
-rw-r--r--fs/buffer.c10
-rw-r--r--fs/cifs/CHANGES13
-rw-r--r--fs/cifs/README10
-rw-r--r--fs/cifs/cifs_dfs_ref.c32
-rw-r--r--fs/cifs/cifs_unicode.c198
-rw-r--r--fs/cifs/cifs_unicode.h23
-rw-r--r--fs/cifs/cifsfs.c6
-rw-r--r--fs/cifs/cifsfs.h2
-rw-r--r--fs/cifs/cifsglob.h16
-rw-r--r--fs/cifs/cifsproto.h5
-rw-r--r--fs/cifs/cifssmb.c215
-rw-r--r--fs/cifs/connect.c1190
-rw-r--r--fs/cifs/dir.c66
-rw-r--r--fs/cifs/file.c80
-rw-r--r--fs/cifs/inode.c21
-rw-r--r--fs/cifs/link.c162
-rw-r--r--fs/cifs/misc.c71
-rw-r--r--fs/cifs/netmisc.c2
-rw-r--r--fs/cifs/nterr.h9
-rw-r--r--fs/cifs/ntlmssp.h68
-rw-r--r--fs/cifs/readdir.c72
-rw-r--r--fs/cifs/sess.c340
-rw-r--r--fs/cifs/smberr.h1
-rw-r--r--fs/configfs/symlink.c2
-rw-r--r--fs/dcache.c2
-rw-r--r--fs/devpts/inode.c23
-rw-r--r--fs/ecryptfs/main.c5
-rw-r--r--fs/eventpoll.c2
-rw-r--r--fs/exec.c86
-rw-r--r--fs/ext4/extents.c19
-rw-r--r--fs/ext4/inode.c26
-rw-r--r--fs/fcntl.c6
-rw-r--r--fs/fuse/inode.c4
-rw-r--r--fs/gfs2/glock.c1
-rw-r--r--fs/gfs2/ops_fstype.c8
-rw-r--r--fs/hpfs/super.c3
-rw-r--r--fs/hugetlbfs/inode.c11
-rw-r--r--fs/inode.c81
-rw-r--r--fs/ioctl.c75
-rw-r--r--fs/libfs.c3
-rw-r--r--fs/lockd/svc.c15
-rw-r--r--fs/namei.c13
-rw-r--r--fs/namespace.c23
-rw-r--r--fs/nfs/dir.c3
-rw-r--r--fs/nfs/file.c6
-rw-r--r--fs/nfs/super.c22
-rw-r--r--fs/nfsd/nfs4recover.c4
-rw-r--r--fs/nfsd/nfs4state.c1
-rw-r--r--fs/nfsd/nfs4xdr.c16
-rw-r--r--fs/nilfs2/ioctl.c281
-rw-r--r--fs/nilfs2/mdt.c15
-rw-r--r--fs/nilfs2/nilfs.h3
-rw-r--r--fs/nilfs2/page.c3
-rw-r--r--fs/nilfs2/recovery.c6
-rw-r--r--fs/nilfs2/segment.c5
-rw-r--r--fs/nilfs2/segment.h3
-rw-r--r--fs/notify/inotify/inotify_user.c2
-rw-r--r--fs/ocfs2/dcache.c15
-rw-r--r--fs/ocfs2/dir.c4
-rw-r--r--fs/ocfs2/export.c9
-rw-r--r--fs/ocfs2/journal.h5
-rw-r--r--fs/ocfs2/namei.c4
-rw-r--r--fs/ocfs2/suballoc.c21
-rw-r--r--fs/ocfs2/symlink.c77
-rw-r--r--fs/open.c2
-rw-r--r--fs/proc/array.c13
-rw-r--r--fs/proc/base.c5
-rw-r--r--fs/proc/meminfo.c2
-rw-r--r--fs/proc/root.c3
-rw-r--r--fs/proc/task_mmu.c4
-rw-r--r--fs/reiserfs/dir.c24
-rw-r--r--fs/reiserfs/namei.c17
-rw-r--r--fs/reiserfs/super.c11
-rw-r--r--fs/reiserfs/xattr.c260
-rw-r--r--fs/reiserfs/xattr_security.c12
-rw-r--r--fs/romfs/super.c3
-rw-r--r--fs/squashfs/Makefile1
-rw-r--r--fs/squashfs/cache.c1
-rw-r--r--fs/squashfs/super.c10
-rw-r--r--fs/super.c48
-rw-r--r--fs/ubifs/super.c3
-rw-r--r--fs/ufs/dir.c2
-rw-r--r--fs/ufs/file.c2
-rw-r--r--fs/ufs/ufs.h2
-rw-r--r--fs/xfs/xfs_bmap.c192
-rw-r--r--fs/xfs/xfs_inode.c2
-rw-r--r--fs/xfs/xfs_mount.c3
-rw-r--r--include/asm-generic/atomic.h4
-rw-r--r--include/asm-generic/bug.h7
-rw-r--r--include/asm-generic/local.h2
-rw-r--r--include/drm/i915_drm.h10
-rw-r--r--include/linux/Kbuild2
-rw-r--r--include/linux/amba/bus.h2
-rw-r--r--include/linux/ata.h28
-rw-r--r--include/linux/binfmts.h14
-rw-r--r--include/linux/blkdev.h1
-rw-r--r--include/linux/device.h9
-rw-r--r--include/linux/dmaengine.h6
-rw-r--r--include/linux/fs.h4
-rw-r--r--include/linux/ide.h2
-rw-r--r--include/linux/input.h24
-rw-r--r--include/linux/memcontrol.h4
-rw-r--r--include/linux/mman.h9
-rw-r--r--include/linux/mmzone.h26
-rw-r--r--include/linux/namei.h1
-rw-r--r--include/linux/netfilter/x_tables.h4
-rw-r--r--include/linux/netfilter/xt_LED.h2
-rw-r--r--include/linux/netfilter/xt_cluster.h2
-rw-r--r--include/linux/nls.h19
-rw-r--r--include/linux/of_platform.h10
-rw-r--r--include/linux/pci_ids.h2
-rw-r--r--include/linux/platform_device.h1
-rw-r--r--include/linux/reiserfs_fs_sb.h3
-rw-r--r--include/linux/reiserfs_xattr.h7
-rw-r--r--include/linux/romfs_fs.h5
-rw-r--r--include/linux/sunrpc/xprt.h1
-rw-r--r--include/linux/syscalls.h1
-rw-r--r--include/linux/usb/cdc.h3
-rw-r--r--include/linux/virtio_net.h1
-rw-r--r--include/linux/writeback.h2
-rw-r--r--include/net/9p/client.h1
-rw-r--r--include/net/bluetooth/hci_core.h1
-rw-r--r--include/net/tcp.h14
-rw-r--r--include/scsi/fc/fc_fs.h1
-rw-r--r--include/scsi/libfc.h1
-rw-r--r--include/scsi/libiscsi.h2
-rw-r--r--include/scsi/osd_protocol.h96
-rw-r--r--include/scsi/scsi_transport_fc.h4
-rw-r--r--include/sound/version.h2
-rw-r--r--init/initramfs.c13
-rw-r--r--kernel/auditfilter.c4
-rw-r--r--kernel/cgroup.c3
-rw-r--r--kernel/futex.c24
-rw-r--r--kernel/irq/handle.c2
-rw-r--r--kernel/kgdb.c4
-rw-r--r--kernel/kprobes.c31
-rw-r--r--kernel/lockdep_internals.h4
-rw-r--r--kernel/panic.c40
-rw-r--r--kernel/posix-cpu-timers.c8
-rw-r--r--kernel/power/disk.c4
-rw-r--r--kernel/sched.c2
-rw-r--r--kernel/sched_clock.c3
-rw-r--r--kernel/sysctl.c28
-rw-r--r--kernel/time/tick-common.c12
-rw-r--r--kernel/trace/trace.c3
-rw-r--r--lib/Kconfig.debug1
-rw-r--r--lib/dma-debug.c53
-rw-r--r--mm/Kconfig28
-rw-r--r--mm/memcontrol.c38
-rw-r--r--mm/memory.c112
-rw-r--r--mm/mmap.c12
-rw-r--r--mm/mmzone.c15
-rw-r--r--mm/nommu.c17
-rw-r--r--mm/oom_kill.c44
-rw-r--r--mm/page-writeback.c6
-rw-r--r--mm/page_alloc.c20
-rw-r--r--mm/pdflush.c31
-rw-r--r--mm/rmap.c2
-rw-r--r--mm/shmem.c8
-rw-r--r--mm/slob.c5
-rw-r--r--mm/slub.c6
-rw-r--r--mm/swap.c46
-rw-r--r--mm/vmalloc.c1
-rw-r--r--mm/vmscan.c2
-rw-r--r--mm/vmstat.c19
-rw-r--r--net/9p/client.c114
-rw-r--r--net/9p/trans_fd.c14
-rw-r--r--net/9p/trans_rdma.c1
-rw-r--r--net/9p/trans_virtio.c1
-rw-r--r--net/Kconfig6
-rw-r--r--net/atm/br2684.c1
-rw-r--r--net/bluetooth/hci_conn.c8
-rw-r--r--net/bluetooth/hci_event.c2
-rw-r--r--net/bluetooth/hci_sysfs.c74
-rw-r--r--net/bridge/br_input.c5
-rw-r--r--net/bridge/br_stp.c3
-rw-r--r--net/core/dev.c9
-rw-r--r--net/core/gen_estimator.c13
-rw-r--r--net/core/netpoll.c8
-rw-r--r--net/core/skbuff.c31
-rw-r--r--net/ipv4/Kconfig4
-rw-r--r--net/ipv4/ipconfig.c12
-rw-r--r--net/ipv4/tcp.c5
-rw-r--r--net/ipv4/tcp_input.c10
-rw-r--r--net/ipv6/netfilter/ip6t_ipv6header.c6
-rw-r--r--net/mac80211/main.c20
-rw-r--r--net/mac80211/rc80211_minstrel.c4
-rw-r--r--net/mac80211/rc80211_pid_algo.c73
-rw-r--r--net/mac80211/tx.c2
-rw-r--r--net/netfilter/Kconfig1
-rw-r--r--net/netfilter/ipvs/ip_vs_conn.c9
-rw-r--r--net/netfilter/ipvs/ip_vs_core.c4
-rw-r--r--net/netfilter/nf_conntrack_netlink.c48
-rw-r--r--net/netfilter/xt_cluster.c8
-rw-r--r--net/sched/cls_api.c2
-rw-r--r--net/sched/sch_fifo.c2
-rw-r--r--net/sched/sch_teql.c5
-rw-r--r--net/sunrpc/xprt.c6
-rw-r--r--net/sunrpc/xprtrdma/svc_rdma_recvfrom.c2
-rw-r--r--net/sunrpc/xprtrdma/svc_rdma_sendto.c3
-rw-r--r--net/sunrpc/xprtrdma/svc_rdma_transport.c3
-rw-r--r--net/sunrpc/xprtsock.c26
-rw-r--r--net/wimax/op-msg.c11
-rw-r--r--net/wimax/stack.c17
-rw-r--r--net/wireless/reg.c17
-rw-r--r--net/wireless/scan.c1
-rw-r--r--scripts/Makefile1
-rw-r--r--scripts/dtc/Makefile54
-rw-r--r--scripts/dtc/Makefile.dtc (renamed from arch/powerpc/boot/dtc-src/Makefile.dtc)0
-rw-r--r--scripts/dtc/checks.c (renamed from arch/powerpc/boot/dtc-src/checks.c)0
-rw-r--r--scripts/dtc/data.c (renamed from arch/powerpc/boot/dtc-src/data.c)0
-rw-r--r--scripts/dtc/dtc-lexer.l (renamed from arch/powerpc/boot/dtc-src/dtc-lexer.l)0
-rw-r--r--scripts/dtc/dtc-lexer.lex.c_shipped (renamed from arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped)0
-rw-r--r--scripts/dtc/dtc-parser.tab.c_shipped (renamed from arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped)0
-rw-r--r--scripts/dtc/dtc-parser.tab.h_shipped (renamed from arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped)0
-rw-r--r--scripts/dtc/dtc-parser.y (renamed from arch/powerpc/boot/dtc-src/dtc-parser.y)0
-rw-r--r--scripts/dtc/dtc.c (renamed from arch/powerpc/boot/dtc-src/dtc.c)0
-rw-r--r--scripts/dtc/dtc.h (renamed from arch/powerpc/boot/dtc-src/dtc.h)0
-rw-r--r--scripts/dtc/flattree.c (renamed from arch/powerpc/boot/dtc-src/flattree.c)0
-rw-r--r--scripts/dtc/fstree.c (renamed from arch/powerpc/boot/dtc-src/fstree.c)0
-rw-r--r--scripts/dtc/libfdt/Makefile.libfdt (renamed from arch/powerpc/boot/libfdt/Makefile.libfdt)0
-rw-r--r--scripts/dtc/libfdt/fdt.c (renamed from arch/powerpc/boot/libfdt/fdt.c)0
-rw-r--r--scripts/dtc/libfdt/fdt.h (renamed from arch/powerpc/boot/libfdt/fdt.h)0
-rw-r--r--scripts/dtc/libfdt/fdt_ro.c (renamed from arch/powerpc/boot/libfdt/fdt_ro.c)0
-rw-r--r--scripts/dtc/libfdt/fdt_rw.c (renamed from arch/powerpc/boot/libfdt/fdt_rw.c)0
-rw-r--r--scripts/dtc/libfdt/fdt_strerror.c (renamed from arch/powerpc/boot/libfdt/fdt_strerror.c)0
-rw-r--r--scripts/dtc/libfdt/fdt_sw.c (renamed from arch/powerpc/boot/libfdt/fdt_sw.c)0
-rw-r--r--scripts/dtc/libfdt/fdt_wip.c (renamed from arch/powerpc/boot/libfdt/fdt_wip.c)0
-rw-r--r--scripts/dtc/libfdt/libfdt.h (renamed from arch/powerpc/boot/libfdt/libfdt.h)0
-rw-r--r--scripts/dtc/libfdt/libfdt_env.h (renamed from arch/powerpc/boot/dtc-src/libfdt_env.h)0
-rw-r--r--scripts/dtc/libfdt/libfdt_internal.h (renamed from arch/powerpc/boot/libfdt/libfdt_internal.h)0
-rw-r--r--scripts/dtc/livetree.c (renamed from arch/powerpc/boot/dtc-src/livetree.c)0
-rw-r--r--scripts/dtc/srcpos.c (renamed from arch/powerpc/boot/dtc-src/srcpos.c)0
-rw-r--r--scripts/dtc/srcpos.h (renamed from arch/powerpc/boot/dtc-src/srcpos.h)0
-rw-r--r--scripts/dtc/treesource.c (renamed from arch/powerpc/boot/dtc-src/treesource.c)0
-rw-r--r--scripts/dtc/version_gen.h (renamed from arch/powerpc/boot/dtc-src/version_gen.h)0
-rwxr-xr-xscripts/kernel-doc7
-rw-r--r--scripts/mod/modpost.c100
-rwxr-xr-xscripts/setlocalversion25
-rwxr-xr-xscripts/tags.sh2
-rw-r--r--security/selinux/hooks.c2
-rw-r--r--security/tomoyo/common.c6
-rw-r--r--security/tomoyo/realpath.c16
-rw-r--r--sound/arm/aaci.c2
-rw-r--r--sound/arm/pxa2xx-ac97-lib.c2
-rw-r--r--sound/core/pcm_lib.c17
-rw-r--r--sound/core/pcm_native.c6
-rw-r--r--sound/drivers/pcsp/pcsp_mixer.c4
-rw-r--r--sound/drivers/serial-u16550.c11
-rw-r--r--sound/isa/msnd/msnd.c6
-rw-r--r--sound/pci/ac97/ac97_patch.c7
-rw-r--r--sound/pci/bt87x.c6
-rw-r--r--sound/pci/ca0106/ca0106_mixer.c2
-rw-r--r--sound/pci/echoaudio/indigodjx.c1
-rw-r--r--sound/pci/echoaudio/indigoiox.c1
-rw-r--r--sound/pci/hda/patch_realtek.c1
-rw-r--r--sound/pci/hda/patch_sigmatel.c7
-rw-r--r--sound/pci/korg1212/korg1212.c6
-rw-r--r--sound/pci/riptide/riptide.c10
-rw-r--r--sound/pci/via82xx.c2
-rw-r--r--sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c3
-rw-r--r--sound/soc/au1x/dbdma2.c2
-rw-r--r--sound/soc/codecs/twl4030.c8
-rw-r--r--sound/soc/codecs/wm8350.c2
-rw-r--r--sound/soc/codecs/wm8990.c40
-rw-r--r--sound/soc/davinci/Kconfig7
-rw-r--r--sound/soc/davinci/davinci-evm.c63
-rw-r--r--sound/soc/davinci/davinci-i2s.c26
-rw-r--r--sound/soc/davinci/davinci-pcm.c71
-rw-r--r--sound/soc/fsl/mpc5200_psc_i2s.c3
-rw-r--r--sound/soc/sh/dma-sh7760.c3
-rw-r--r--sound/soc/soc-core.c3
-rw-r--r--sound/sparc/dbri.c3
-rw-r--r--sound/usb/usx2y/usbusx2yaudio.c3
961 files changed, 28525 insertions, 10184 deletions
diff --git a/Documentation/ABI/testing/sysfs-kernel-slab b/Documentation/ABI/testing/sysfs-kernel-slab
new file mode 100644
index 00000000000..6dcf75e594f
--- /dev/null
+++ b/Documentation/ABI/testing/sysfs-kernel-slab
@@ -0,0 +1,479 @@
+What: /sys/kernel/slab
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The /sys/kernel/slab directory contains a snapshot of the
+ internal state of the SLUB allocator for each cache. Certain
+ files may be modified to change the behavior of the cache (and
+ any cache it aliases, if any).
+Users: kernel memory tuning tools
+
+What: /sys/kernel/slab/cache/aliases
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The aliases file is read-only and specifies how many caches
+ have merged into this cache.
+
+What: /sys/kernel/slab/cache/align
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The align file is read-only and specifies the cache's object
+ alignment in bytes.
+
+What: /sys/kernel/slab/cache/alloc_calls
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_calls file is read-only and lists the kernel code
+ locations from which allocations for this cache were performed.
+ The alloc_calls file only contains information if debugging is
+ enabled for that cache (see Documentation/vm/slub.txt).
+
+What: /sys/kernel/slab/cache/alloc_fastpath
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_fastpath file is read-only and specifies how many
+ objects have been allocated using the fast path.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/alloc_from_partial
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_from_partial file is read-only and specifies how
+ many times a cpu slab has been full and it has been refilled
+ by using a slab from the list of partially used slabs.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/alloc_refill
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_refill file is read-only and specifies how many
+ times the per-cpu freelist was empty but there were objects
+ available as the result of remote cpu frees.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/alloc_slab
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_slab file is read-only and specifies how many times
+ a new slab had to be allocated from the page allocator.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/alloc_slowpath
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The alloc_slowpath file is read-only and specifies how many
+ objects have been allocated using the slow path because of a
+ refill or allocation from a partial or new slab.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/cache_dma
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The cache_dma file is read-only and specifies whether objects
+ are from ZONE_DMA.
+ Available when CONFIG_ZONE_DMA is enabled.
+
+What: /sys/kernel/slab/cache/cpu_slabs
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The cpu_slabs file is read-only and displays how many cpu slabs
+ are active and their NUMA locality.
+
+What: /sys/kernel/slab/cache/cpuslab_flush
+Date: April 2009
+KernelVersion: 2.6.31
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file cpuslab_flush is read-only and specifies how many
+ times a cache's cpu slabs have been flushed as the result of
+ destroying or shrinking a cache, a cpu going offline, or as
+ the result of forcing an allocation from a certain node.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/ctor
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The ctor file is read-only and specifies the cache's object
+ constructor function, which is invoked for each object when a
+ new slab is allocated.
+
+What: /sys/kernel/slab/cache/deactivate_empty
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_empty is read-only and specifies how many
+ times an empty cpu slab was deactivated.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/deactivate_full
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_full is read-only and specifies how many
+ times a full cpu slab was deactivated.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/deactivate_remote_frees
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_remote_frees is read-only and specifies how
+ many times a cpu slab has been deactivated and contained free
+ objects that were freed remotely.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/deactivate_to_head
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_to_head is read-only and specifies how
+ many times a partial cpu slab was deactivated and added to the
+ head of its node's partial list.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/deactivate_to_tail
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file deactivate_to_tail is read-only and specifies how
+ many times a partial cpu slab was deactivated and added to the
+ tail of its node's partial list.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/destroy_by_rcu
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The destroy_by_rcu file is read-only and specifies whether
+ slabs (not objects) are freed by rcu.
+
+What: /sys/kernel/slab/cache/free_add_partial
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file free_add_partial is read-only and specifies how many
+ times an object has been freed in a full slab so that it had to
+ added to its node's partial list.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_calls
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_calls file is read-only and lists the locations of
+ object frees if slab debugging is enabled (see
+ Documentation/vm/slub.txt).
+
+What: /sys/kernel/slab/cache/free_fastpath
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_fastpath file is read-only and specifies how many
+ objects have been freed using the fast path because it was an
+ object from the cpu slab.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_frozen
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_frozen file is read-only and specifies how many
+ objects have been freed to a frozen slab (i.e. a remote cpu
+ slab).
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_remove_partial
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file free_remove_partial is read-only and specifies how
+ many times an object has been freed to a now-empty slab so
+ that it had to be removed from its node's partial list.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_slab
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_slab file is read-only and specifies how many times an
+ empty slab has been freed back to the page allocator.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/free_slowpath
+Date: February 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The free_slowpath file is read-only and specifies how many
+ objects have been freed using the slow path (i.e. to a full or
+ partial slab).
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/hwcache_align
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The hwcache_align file is read-only and specifies whether
+ objects are aligned on cachelines.
+
+What: /sys/kernel/slab/cache/min_partial
+Date: February 2009
+KernelVersion: 2.6.30
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ David Rientjes <rientjes@google.com>
+Description:
+ The min_partial file specifies how many empty slabs shall
+ remain on a node's partial list to avoid the overhead of
+ allocating new slabs. Such slabs may be reclaimed by utilizing
+ the shrink file.
+
+What: /sys/kernel/slab/cache/object_size
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The object_size file is read-only and specifies the cache's
+ object size.
+
+What: /sys/kernel/slab/cache/objects
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The objects file is read-only and displays how many objects are
+ active and from which nodes they are from.
+
+What: /sys/kernel/slab/cache/objects_partial
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The objects_partial file is read-only and displays how many
+ objects are on partial slabs and from which nodes they are
+ from.
+
+What: /sys/kernel/slab/cache/objs_per_slab
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file objs_per_slab is read-only and specifies how many
+ objects may be allocated from a single slab of the order
+ specified in /sys/kernel/slab/cache/order.
+
+What: /sys/kernel/slab/cache/order
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The order file specifies the page order at which new slabs are
+ allocated. It is writable and can be changed to increase the
+ number of objects per slab. If a slab cannot be allocated
+ because of fragmentation, SLUB will retry with the minimum order
+ possible depending on its characteristics.
+
+What: /sys/kernel/slab/cache/order_fallback
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file order_fallback is read-only and specifies how many
+ times an allocation of a new slab has not been possible at the
+ cache's order and instead fallen back to its minimum possible
+ order.
+ Available when CONFIG_SLUB_STATS is enabled.
+
+What: /sys/kernel/slab/cache/partial
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The partial file is read-only and displays how long many
+ partial slabs there are and how long each node's list is.
+
+What: /sys/kernel/slab/cache/poison
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The poison file specifies whether objects should be poisoned
+ when a new slab is allocated.
+
+What: /sys/kernel/slab/cache/reclaim_account
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The reclaim_account file specifies whether the cache's objects
+ are reclaimable (and grouped by their mobility).
+
+What: /sys/kernel/slab/cache/red_zone
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The red_zone file specifies whether the cache's objects are red
+ zoned.
+
+What: /sys/kernel/slab/cache/remote_node_defrag_ratio
+Date: January 2008
+KernelVersion: 2.6.25
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The file remote_node_defrag_ratio specifies the percentage of
+ times SLUB will attempt to refill the cpu slab with a partial
+ slab from a remote node as opposed to allocating a new slab on
+ the local node. This reduces the amount of wasted memory over
+ the entire system but can be expensive.
+ Available when CONFIG_NUMA is enabled.
+
+What: /sys/kernel/slab/cache/sanity_checks
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The sanity_checks file specifies whether expensive checks
+ should be performed on free and, at minimum, enables double free
+ checks. Caches that enable sanity_checks cannot be merged with
+ caches that do not.
+
+What: /sys/kernel/slab/cache/shrink
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The shrink file is written when memory should be reclaimed from
+ a cache. Empty partial slabs are freed and the partial list is
+ sorted so the slabs with the fewest available objects are used
+ first.
+
+What: /sys/kernel/slab/cache/slab_size
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The slab_size file is read-only and specifies the object size
+ with metadata (debugging information and alignment) in bytes.
+
+What: /sys/kernel/slab/cache/slabs
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The slabs file is read-only and displays how long many slabs
+ there are (both cpu and partial) and from which nodes they are
+ from.
+
+What: /sys/kernel/slab/cache/store_user
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The store_user file specifies whether the location of
+ allocation or free should be tracked for a cache.
+
+What: /sys/kernel/slab/cache/total_objects
+Date: April 2008
+KernelVersion: 2.6.26
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The total_objects file is read-only and displays how many total
+ objects a cache has and from which nodes they are from.
+
+What: /sys/kernel/slab/cache/trace
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ The trace file specifies whether object allocations and frees
+ should be traced.
+
+What: /sys/kernel/slab/cache/validate
+Date: May 2007
+KernelVersion: 2.6.22
+Contact: Pekka Enberg <penberg@cs.helsinki.fi>,
+ Christoph Lameter <cl@linux-foundation.org>
+Description:
+ Writing to the validate file causes SLUB to traverse all of its
+ cache's objects and check the validity of metadata.
diff --git a/Documentation/DocBook/Makefile b/Documentation/DocBook/Makefile
index 8918a32c6b3..b1eb661e630 100644
--- a/Documentation/DocBook/Makefile
+++ b/Documentation/DocBook/Makefile
@@ -143,7 +143,8 @@ quiet_cmd_db2pdf = PDF $@
$(call cmd,db2pdf)
-main_idx = Documentation/DocBook/index.html
+index = index.html
+main_idx = Documentation/DocBook/$(index)
build_main_index = rm -rf $(main_idx) && \
echo '<h1>Linux Kernel HTML Documentation</h1>' >> $(main_idx) && \
echo '<h2>Kernel Version: $(KERNELVERSION)</h2>' >> $(main_idx) && \
@@ -232,7 +233,7 @@ clean-files := $(DOCBOOKS) \
$(patsubst %.xml, %.pdf, $(DOCBOOKS)) \
$(patsubst %.xml, %.html, $(DOCBOOKS)) \
$(patsubst %.xml, %.9, $(DOCBOOKS)) \
- $(C-procfs-example)
+ $(C-procfs-example) $(index)
clean-dirs := $(patsubst %.xml,%,$(DOCBOOKS)) man
diff --git a/Documentation/DocBook/kgdb.tmpl b/Documentation/DocBook/kgdb.tmpl
index 372dec20c8d..5cff41a5fa7 100644
--- a/Documentation/DocBook/kgdb.tmpl
+++ b/Documentation/DocBook/kgdb.tmpl
@@ -281,7 +281,7 @@
seriously wrong while debugging, it will most often be the case
that you want to enable gdb to be verbose about its target
communications. You do this prior to issuing the <constant>target
- remote</constant> command by typing in: <constant>set remote debug 1</constant>
+ remote</constant> command by typing in: <constant>set debug remote 1</constant>
</para>
</chapter>
<chapter id="KGDBTestSuite">
diff --git a/Documentation/filesystems/Locking b/Documentation/filesystems/Locking
index 76efe5b71d7..3120f8dd2c3 100644
--- a/Documentation/filesystems/Locking
+++ b/Documentation/filesystems/Locking
@@ -512,16 +512,24 @@ locking rules:
BKL mmap_sem PageLocked(page)
open: no yes
close: no yes
-fault: no yes
-page_mkwrite: no yes no
+fault: no yes can return with page locked
+page_mkwrite: no yes can return with page locked
access: no yes
- ->page_mkwrite() is called when a previously read-only page is
-about to become writeable. The file system is responsible for
-protecting against truncate races. Once appropriate action has been
-taking to lock out truncate, the page range should be verified to be
-within i_size. The page mapping should also be checked that it is not
-NULL.
+ ->fault() is called when a previously not present pte is about
+to be faulted in. The filesystem must find and return the page associated
+with the passed in "pgoff" in the vm_fault structure. If it is possible that
+the page may be truncated and/or invalidated, then the filesystem must lock
+the page, then ensure it is not already truncated (the page lock will block
+subsequent truncate), and then return with VM_FAULT_LOCKED, and the page
+locked. The VM will unlock the page.
+
+ ->page_mkwrite() is called when a previously read-only pte is
+about to become writeable. The filesystem again must ensure that there are
+no truncate/invalidate races, and then return with the page locked. If
+the page has been truncated, the filesystem should not look up a new page
+like the ->fault() handler, but simply return with VM_FAULT_NOPAGE, which
+will cause the VM to retry the fault.
->access() is called when get_user_pages() fails in
acces_process_vm(), typically used to debug a process through
diff --git a/Documentation/filesystems/tmpfs.txt b/Documentation/filesystems/tmpfs.txt
index 222437efd75..3015da0c6b2 100644
--- a/Documentation/filesystems/tmpfs.txt
+++ b/Documentation/filesystems/tmpfs.txt
@@ -133,4 +133,4 @@ RAM/SWAP in 10240 inodes and it is only accessible by root.
Author:
Christoph Rohland <cr@sap.com>, 1.12.01
Updated:
- Hugh Dickins <hugh@veritas.com>, 4 June 2007
+ Hugh Dickins, 4 June 2007
diff --git a/Documentation/input/bcm5974.txt b/Documentation/input/bcm5974.txt
new file mode 100644
index 00000000000..5e22dcf6d48
--- /dev/null
+++ b/Documentation/input/bcm5974.txt
@@ -0,0 +1,65 @@
+BCM5974 Driver (bcm5974)
+------------------------
+ Copyright (C) 2008-2009 Henrik Rydberg <rydberg@euromail.se>
+
+The USB initialization and package decoding was made by Scott Shawcroft as
+part of the touchd user-space driver project:
+ Copyright (C) 2008 Scott Shawcroft (scott.shawcroft@gmail.com)
+
+The BCM5974 driver is based on the appletouch driver:
+ Copyright (C) 2001-2004 Greg Kroah-Hartman (greg@kroah.com)
+ Copyright (C) 2005 Johannes Berg (johannes@sipsolutions.net)
+ Copyright (C) 2005 Stelian Pop (stelian@popies.net)
+ Copyright (C) 2005 Frank Arnold (frank@scirocco-5v-turbo.de)
+ Copyright (C) 2005 Peter Osterlund (petero2@telia.com)
+ Copyright (C) 2005 Michael Hanselmann (linux-kernel@hansmi.ch)
+ Copyright (C) 2006 Nicolas Boichat (nicolas@boichat.ch)
+
+This driver adds support for the multi-touch trackpad on the new Apple
+Macbook Air and Macbook Pro laptops. It replaces the appletouch driver on
+those computers, and integrates well with the synaptics driver of the Xorg
+system.
+
+Known to work on Macbook Air, Macbook Pro Penryn and the new unibody
+Macbook 5 and Macbook Pro 5.
+
+Usage
+-----
+
+The driver loads automatically for the supported usb device ids, and
+becomes available both as an event device (/dev/input/event*) and as a
+mouse via the mousedev driver (/dev/input/mice).
+
+USB Race
+--------
+
+The Apple multi-touch trackpads report both mouse and keyboard events via
+different interfaces of the same usb device. This creates a race condition
+with the HID driver, which, if not told otherwise, will find the standard
+HID mouse and keyboard, and claim the whole device. To remedy, the usb
+product id must be listed in the mouse_ignore list of the hid driver.
+
+Debug output
+------------
+
+To ease the development for new hardware version, verbose packet output can
+be switched on with the debug kernel module parameter. The range [1-9]
+yields different levels of verbosity. Example (as root):
+
+echo -n 9 > /sys/module/bcm5974/parameters/debug
+
+tail -f /var/log/debug
+
+echo -n 0 > /sys/module/bcm5974/parameters/debug
+
+Trivia
+------
+
+The driver was developed at the ubuntu forums in June 2008 [1], and now has
+a more permanent home at bitmath.org [2].
+
+Links
+-----
+
+[1] http://ubuntuforums.org/showthread.php?t=840040
+[2] http://http://bitmath.org/code/
diff --git a/Documentation/input/multi-touch-protocol.txt b/Documentation/input/multi-touch-protocol.txt
new file mode 100644
index 00000000000..9f09557aea3
--- /dev/null
+++ b/Documentation/input/multi-touch-protocol.txt
@@ -0,0 +1,140 @@
+Multi-touch (MT) Protocol
+-------------------------
+ Copyright (C) 2009 Henrik Rydberg <rydberg@euromail.se>
+
+
+Introduction
+------------
+
+In order to utilize the full power of the new multi-touch devices, a way to
+report detailed finger data to user space is needed. This document
+describes the multi-touch (MT) protocol which allows kernel drivers to
+report details for an arbitrary number of fingers.
+
+
+Usage
+-----
+
+Anonymous finger details are sent sequentially as separate packets of ABS
+events. Only the ABS_MT events are recognized as part of a finger
+packet. The end of a packet is marked by calling the input_mt_sync()
+function, which generates a SYN_MT_REPORT event. The end of multi-touch
+transfer is marked by calling the usual input_sync() function.
+
+A set of ABS_MT events with the desired properties is defined. The events
+are divided into categories, to allow for partial implementation. The
+minimum set consists of ABS_MT_TOUCH_MAJOR, ABS_MT_POSITION_X and
+ABS_MT_POSITION_Y, which allows for multiple fingers to be tracked. If the
+device supports it, the ABS_MT_WIDTH_MAJOR may be used to provide the size
+of the approaching finger. Anisotropy and direction may be specified with
+ABS_MT_TOUCH_MINOR, ABS_MT_WIDTH_MINOR and ABS_MT_ORIENTATION. Devices with
+more granular information may specify general shapes as blobs, i.e., as a
+sequence of rectangular shapes grouped together by an
+ABS_MT_BLOB_ID. Finally, the ABS_MT_TOOL_TYPE may be used to specify
+whether the touching tool is a finger or a pen or something else.
+
+
+Event Semantics
+---------------
+
+The word "contact" is used to describe a tool which is in direct contact
+with the surface. A finger, a pen or a rubber all classify as contacts.
+
+ABS_MT_TOUCH_MAJOR
+
+The length of the major axis of the contact. The length should be given in
+surface units. If the surface has an X times Y resolution, the largest
+possible value of ABS_MT_TOUCH_MAJOR is sqrt(X^2 + Y^2), the diagonal.
+
+ABS_MT_TOUCH_MINOR
+
+The length, in surface units, of the minor axis of the contact. If the
+contact is circular, this event can be omitted.
+
+ABS_MT_WIDTH_MAJOR
+
+The length, in surface units, of the major axis of the approaching
+tool. This should be understood as the size of the tool itself. The
+orientation of the contact and the approaching tool are assumed to be the
+same.
+
+ABS_MT_WIDTH_MINOR
+
+The length, in surface units, of the minor axis of the approaching
+tool. Omit if circular.
+
+The above four values can be used to derive additional information about
+the contact. The ratio ABS_MT_TOUCH_MAJOR / ABS_MT_WIDTH_MAJOR approximates
+the notion of pressure. The fingers of the hand and the palm all have
+different characteristic widths [1].
+
+ABS_MT_ORIENTATION
+
+The orientation of the ellipse. The value should describe half a revolution
+clockwise around the touch center. The scale of the value is arbitrary, but
+zero should be returned for an ellipse aligned along the Y axis of the
+surface. As an example, an index finger placed straight onto the axis could
+return zero orientation, something negative when twisted to the left, and
+something positive when twisted to the right. This value can be omitted if
+the touching object is circular, or if the information is not available in
+the kernel driver.
+
+ABS_MT_POSITION_X
+
+The surface X coordinate of the center of the touching ellipse.
+
+ABS_MT_POSITION_Y
+
+The surface Y coordinate of the center of the touching ellipse.
+
+ABS_MT_TOOL_TYPE
+
+The type of approaching tool. A lot of kernel drivers cannot distinguish
+between different tool types, such as a finger or a pen. In such cases, the
+event should be omitted. The protocol currently supports MT_TOOL_FINGER and
+MT_TOOL_PEN [2].
+
+ABS_MT_BLOB_ID
+
+The BLOB_ID groups several packets together into one arbitrarily shaped
+contact. This is a low-level anonymous grouping, and should not be confused
+with the high-level contactID, explained below. Most kernel drivers will
+not have this capability, and can safely omit the event.
+
+
+Finger Tracking
+---------------
+
+The kernel driver should generate an arbitrary enumeration of the set of
+anonymous contacts currently on the surface. The order in which the packets
+appear in the event stream is not important.
+
+The process of finger tracking, i.e., to assign a unique contactID to each
+initiated contact on the surface, is left to user space; preferably the
+multi-touch X driver [3]. In that driver, the contactID stays the same and
+unique until the contact vanishes (when the finger leaves the surface). The
+problem of assigning a set of anonymous fingers to a set of identified
+fingers is a euclidian bipartite matching problem at each event update, and
+relies on a sufficiently rapid update rate.
+
+Notes
+-----
+
+In order to stay compatible with existing applications, the data
+reported in a finger packet must not be recognized as single-touch
+events. In addition, all finger data must bypass input filtering,
+since subsequent events of the same type refer to different fingers.
+
+The first kernel driver to utilize the MT protocol is the bcm5974 driver,
+where examples can be found.
+
+[1] With the extension ABS_MT_APPROACH_X and ABS_MT_APPROACH_Y, the
+difference between the contact position and the approaching tool position
+could be used to derive tilt.
+[2] The list can of course be extended.
+[3] The multi-touch X driver is currently in the prototyping stage. At the
+time of writing (April 2009), the MT protocol is not yet merged, and the
+prototype implements finger matching, basic mouse support and two-finger
+scrolling. The project aims at improving the quality of current multi-touch
+functionality available in the synaptics X driver, and in addition
+implement more advanced gestures.
diff --git a/Documentation/kernel-doc-nano-HOWTO.txt b/Documentation/kernel-doc-nano-HOWTO.txt
index 026ec7d5738..4d04572b654 100644
--- a/Documentation/kernel-doc-nano-HOWTO.txt
+++ b/Documentation/kernel-doc-nano-HOWTO.txt
@@ -269,7 +269,10 @@ Use the argument mechanism to document members or constants.
Inside a struct description, you can use the "private:" and "public:"
comment tags. Structure fields that are inside a "private:" area
-are not listed in the generated output documentation.
+are not listed in the generated output documentation. The "private:"
+and "public:" tags must begin immediately following a "/*" comment
+marker. They may optionally include comments between the ":" and the
+ending "*/" marker.
Example:
@@ -283,7 +286,7 @@ Example:
struct my_struct {
int a;
int b;
-/* private: */
+/* private: internal use only */
int c;
};
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt
index 90b3924071b..e87bdbfbcc7 100644
--- a/Documentation/kernel-parameters.txt
+++ b/Documentation/kernel-parameters.txt
@@ -17,6 +17,12 @@ are specified on the kernel command line with the module name plus
usbcore.blinkenlights=1
+Hyphens (dashes) and underscores are equivalent in parameter names, so
+ log_buf_len=1M print-fatal-signals=1
+can also be entered as
+ log-buf-len=1M print_fatal_signals=1
+
+
This document may not be entirely up to date and comprehensive. The command
"modinfo -p ${modulename}" shows a current list of all parameters of a loadable
module. Loadable modules, after being loaded into the running kernel, also
@@ -345,7 +351,7 @@ and is between 256 and 4096 characters. It is defined in the file
not play well with APC CPU idle - disable it if you have
APC and your system crashes randomly.
- apic= [APIC,i386] Advanced Programmable Interrupt Controller
+ apic= [APIC,X86-32] Advanced Programmable Interrupt Controller
Change the output verbosity whilst booting
Format: { quiet (default) | verbose | debug }
Change the amount of debugging information output
@@ -702,7 +708,7 @@ and is between 256 and 4096 characters. It is defined in the file
to discrete, to make X server driver able to add WB
entry later. This parameter enables that.
- enable_timer_pin_1 [i386,x86-64]
+ enable_timer_pin_1 [X86]
Enable PIN 1 of APIC timer
Can be useful to work around chipset bugs
(in particular on some ATI chipsets).
@@ -775,7 +781,7 @@ and is between 256 and 4096 characters. It is defined in the file
hashdist= [KNL,NUMA] Large hashes allocated during boot
are distributed across NUMA nodes. Defaults on
- for IA-64, off otherwise.
+ for 64bit NUMA, off otherwise.
Format: 0 | 1 (for off | on)
hcl= [IA-64] SGI's Hardware Graph compatibility layer
diff --git a/Documentation/lockdep-design.txt b/Documentation/lockdep-design.txt
index 938ea22f2cc..e20d913d591 100644
--- a/Documentation/lockdep-design.txt
+++ b/Documentation/lockdep-design.txt
@@ -54,9 +54,9 @@ locking error messages, inside curlies. A contrived example:
The bit position indicates STATE, STATE-read, for each of the states listed
above, and the character displayed in each indicates:
- '.' acquired while irqs disabled
- '+' acquired in irq context
- '-' acquired with irqs enabled
+ '.' acquired while irqs disabled and not in irq context
+ '-' acquired in irq context
+ '+' acquired with irqs enabled
'?' acquired in irq context with irqs enabled.
Unused mutexes cannot be part of the cause of an error.
diff --git a/Documentation/networking/ip-sysctl.txt b/Documentation/networking/ip-sysctl.txt
index ec5de02f543..b121c5db707 100644
--- a/Documentation/networking/ip-sysctl.txt
+++ b/Documentation/networking/ip-sysctl.txt
@@ -1266,13 +1266,22 @@ sctp_rmem - vector of 3 INTEGERs: min, default, max
sctp_wmem - vector of 3 INTEGERs: min, default, max
See tcp_wmem for a description.
-UNDOCUMENTED:
/proc/sys/net/core/*
- dev_weight FIXME
+dev_weight - INTEGER
+ The maximum number of packets that kernel can handle on a NAPI
+ interrupt, it's a Per-CPU variable.
+
+ Default: 64
/proc/sys/net/unix/*
- max_dgram_qlen FIXME
+max_dgram_qlen - INTEGER
+ The maximum length of dgram socket receive queue
+
+ Default: 10
+
+
+UNDOCUMENTED:
/proc/sys/net/irda/*
fast_poll_increase FIXME
diff --git a/Documentation/sound/alsa/Procfile.txt b/Documentation/sound/alsa/Procfile.txt
index bba2dbb79d8..cfac20cf9e3 100644
--- a/Documentation/sound/alsa/Procfile.txt
+++ b/Documentation/sound/alsa/Procfile.txt
@@ -104,6 +104,11 @@ card*/pcm*/xrun_debug
When this value is greater than 1, the driver will show the
stack trace additionally. This may help the debugging.
+ Since 2.6.30, this option also enables the hwptr check using
+ jiffies. This detects spontaneous invalid pointer callback
+ values, but can be lead to too much corrections for a (mostly
+ buggy) hardware that doesn't give smooth pointer updates.
+
card*/pcm*/sub*/info
The general information of this PCM sub-stream.
diff --git a/Documentation/sysctl/vm.txt b/Documentation/sysctl/vm.txt
index 97c4b328432..c302ddf629a 100644
--- a/Documentation/sysctl/vm.txt
+++ b/Documentation/sysctl/vm.txt
@@ -39,8 +39,6 @@ Currently, these files are in /proc/sys/vm:
- nr_hugepages
- nr_overcommit_hugepages
- nr_pdflush_threads
-- nr_pdflush_threads_min
-- nr_pdflush_threads_max
- nr_trim_pages (only if CONFIG_MMU=n)
- numa_zonelist_order
- oom_dump_tasks
@@ -90,6 +88,10 @@ will itself start writeback.
If dirty_bytes is written, dirty_ratio becomes a function of its value
(dirty_bytes / the amount of dirtyable system memory).
+Note: the minimum value allowed for dirty_bytes is two pages (in bytes); any
+value lower than this limit will be ignored and the old configuration will be
+retained.
+
==============================================================
dirty_expire_centisecs
@@ -465,32 +467,6 @@ The default value is 0.
==============================================================
-nr_pdflush_threads_min
-
-This value controls the minimum number of pdflush threads.
-
-At boot time, the kernel will create and maintain 'nr_pdflush_threads_min'
-threads for the kernel's lifetime.
-
-The default value is 2. The minimum value you can specify is 1, and
-the maximum value is the current setting of 'nr_pdflush_threads_max'.
-
-See 'nr_pdflush_threads_max' below for more information.
-
-==============================================================
-
-nr_pdflush_threads_max
-
-This value controls the maximum number of pdflush threads that can be
-created. The pdflush algorithm will create a new pdflush thread (up to
-this maximum) if no pdflush threads have been available for >= 1 second.
-
-The default value is 8. The minimum value you can specify is the
-current value of 'nr_pdflush_threads_min' and the
-maximum is 1000.
-
-==============================================================
-
overcommit_memory:
This value contains a flag that enables memory overcommitment.
diff --git a/Documentation/sysfs-rules.txt b/Documentation/sysfs-rules.txt
index 6049a2a84dd..5d8bc2cd250 100644
--- a/Documentation/sysfs-rules.txt
+++ b/Documentation/sysfs-rules.txt
@@ -113,7 +113,7 @@ versions of the sysfs interface.
"devices" directory at /sys/subsystem/<name>/devices.
If /sys/subsystem exists, /sys/bus, /sys/class and /sys/block can be
- ignored. If it does not exist, you have always to scan all three
+ ignored. If it does not exist, you always have to scan all three
places, as the kernel is free to move a subsystem from one place to
the other, as long as the devices are still reachable by the same
subsystem name.
diff --git a/MAINTAINERS b/MAINTAINERS
index c547f4a2bb6..77cbfb1a696 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1431,6 +1431,14 @@ P: Russell King
M: linux@arm.linux.org.uk
F: include/linux/clk.h
+CISCO FCOE HBA DRIVER
+P: Abhijeet Joglekar
+M: abjoglek@cisco.com
+P: Joe Eykholt
+M: jeykholt@cisco.com
+L: linux-scsi@vger.kernel.org
+S: Supported
+
CODA FILE SYSTEM
P: Jan Harkes
M: jaharkes@cs.cmu.edu
@@ -3434,11 +3442,10 @@ L: linuxppc-dev@ozlabs.org
S: Maintained
LINUX FOR POWERPC EMBEDDED MPC5XXX
-P: Sylvain Munaut
-M: tnt@246tNt.com
P: Grant Likely
M: grant.likely@secretlab.ca
L: linuxppc-dev@ozlabs.org
+T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC4XX
@@ -3456,6 +3463,7 @@ P: Grant Likely
M: grant.likely@secretlab.ca
W: http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex
L: linuxppc-dev@ozlabs.org
+T: git git://git.secretlab.ca/git/linux-2.6.git
S: Maintained
LINUX FOR POWERPC EMBEDDED PPC8XX
@@ -4189,7 +4197,7 @@ P: Joel Becker
M: joel.becker@oracle.com
L: ocfs2-devel@oss.oracle.com (moderated for non-subscribers)
W: http://oss.oracle.com/projects/ocfs2/
-T: git git://git.kernel.org/pub/scm/linux/kernel/git/mfasheh/ocfs2.git
+T: git git://git.kernel.org/pub/scm/linux/kernel/git/jlbec/ocfs2.git
S: Supported
F: Documentation/filesystems/ocfs2.txt
F: Documentation/filesystems/dlmfs.txt
@@ -4521,6 +4529,19 @@ M: jim@jtan.com
L: cbe-oss-dev@ozlabs.org
S: Maintained
+PTRACE SUPPORT
+P: Roland McGrath
+M: roland@redhat.com
+P: Oleg Nesterov
+M: oleg@redhat.com
+L: linux-kernel@vger.kernel.org
+S: Maintained
+F: include/asm-generic/syscall.h
+F: include/linux/ptrace.h
+F: include/linux/regset.h
+F: include/linux/tracehook.h
+F: kernel/ptrace.c
+
PVRUSB2 VIDEO4LINUX DRIVER
P: Mike Isely
M: isely@pobox.com
@@ -4666,13 +4687,13 @@ F: kernel/rcutorture.c
RDC R-321X SoC
P: Florian Fainelli
-M: florian.fainelli@telecomint.eu
+M: florian@openwrt.org
L: linux-kernel@vger.kernel.org
S: Maintained
RDC R6040 FAST ETHERNET DRIVER
P: Florian Fainelli
-M: florian.fainelli@telecomint.eu
+M: florian@openwrt.org
L: netdev@vger.kernel.org
S: Maintained
F: drivers/net/r6040.c
@@ -5566,6 +5587,14 @@ M: ian@mnementh.co.uk
S: Maintained
F: drivers/mmc/host/tmio_mmc.*
+TMPFS (SHMEM FILESYSTEM)
+P: Hugh Dickins
+M: hugh.dickins@tiscali.co.uk
+L: linux-mm@kvack.org
+S: Maintained
+F: include/linux/shmem_fs.h
+F: mm/shmem.c
+
TPM DEVICE DRIVER
P: Debora Velarde
M: debora@linux.vnet.ibm.com
diff --git a/Makefile b/Makefile
index eb38c839926..739fd34a72a 100644
--- a/Makefile
+++ b/Makefile
@@ -1,8 +1,8 @@
VERSION = 2
PATCHLEVEL = 6
SUBLEVEL = 30
-EXTRAVERSION = -rc4
-NAME = Vindictive Armadillo
+EXTRAVERSION = -rc7
+NAME = Man-Eating Seals of Antiquity
# *DOCUMENTATION*
# To see a list of typical targets execute "make help"
@@ -1293,7 +1293,7 @@ help:
@echo ' dir/ - Build all files in dir and below'
@echo ' dir/file.[ois] - Build specified target only'
@echo ' dir/file.ko - Build module including final link'
- @echo ' prepare - Set up for building external modules'
+ @echo ' modules_prepare - Set up for building external modules'
@echo ' tags/TAGS - Generate tags file for editors'
@echo ' cscope - Generate cscope index'
@echo ' kernelrelease - Output the release version string'
@@ -1421,7 +1421,9 @@ $(clean-dirs):
$(Q)$(MAKE) $(clean)=$(patsubst _clean_%,%,$@)
clean: rm-dirs := $(MODVERDIR)
-clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers
+clean: rm-files := $(KBUILD_EXTMOD)/Module.symvers \
+ $(KBUILD_EXTMOD)/Module.markers \
+ $(KBUILD_EXTMOD)/modules.order
clean: $(clean-dirs)
$(call cmd,rmdirs)
$(call cmd,rmfiles)
diff --git a/arch/alpha/include/asm/barrier.h b/arch/alpha/include/asm/barrier.h
index ac78eba909b..ce8860a0b32 100644
--- a/arch/alpha/include/asm/barrier.h
+++ b/arch/alpha/include/asm/barrier.h
@@ -16,11 +16,13 @@ __asm__ __volatile__("wmb": : :"memory")
__asm__ __volatile__("mb": : :"memory")
#ifdef CONFIG_SMP
+#define __ASM_SMP_MB "\tmb\n"
#define smp_mb() mb()
#define smp_rmb() rmb()
#define smp_wmb() wmb()
#define smp_read_barrier_depends() read_barrier_depends()
#else
+#define __ASM_SMP_MB
#define smp_mb() barrier()
#define smp_rmb() barrier()
#define smp_wmb() barrier()
diff --git a/arch/alpha/include/asm/futex.h b/arch/alpha/include/asm/futex.h
index 6a332a9f099..945de222ab9 100644
--- a/arch/alpha/include/asm/futex.h
+++ b/arch/alpha/include/asm/futex.h
@@ -1,6 +1,116 @@
-#ifndef _ASM_FUTEX_H
-#define _ASM_FUTEX_H
+#ifndef _ASM_ALPHA_FUTEX_H
+#define _ASM_ALPHA_FUTEX_H
-#include <asm-generic/futex.h>
+#ifdef __KERNEL__
-#endif
+#include <linux/futex.h>
+#include <linux/uaccess.h>
+#include <asm/errno.h>
+#include <asm/barrier.h>
+
+#define __futex_atomic_op(insn, ret, oldval, uaddr, oparg) \
+ __asm__ __volatile__( \
+ __ASM_SMP_MB \
+ "1: ldl_l %0,0(%2)\n" \
+ insn \
+ "2: stl_c %1,0(%2)\n" \
+ " beq %1,4f\n" \
+ " mov $31,%1\n" \
+ "3: .subsection 2\n" \
+ "4: br 1b\n" \
+ " .previous\n" \
+ " .section __ex_table,\"a\"\n" \
+ " .long 1b-.\n" \
+ " lda $31,3b-1b(%1)\n" \
+ " .long 2b-.\n" \
+ " lda $31,3b-2b(%1)\n" \
+ " .previous\n" \
+ : "=&r" (oldval), "=&r"(ret) \
+ : "r" (uaddr), "r"(oparg) \
+ : "memory")
+
+static inline int futex_atomic_op_inuser (int encoded_op, int __user *uaddr)
+{
+ int op = (encoded_op >> 28) & 7;
+ int cmp = (encoded_op >> 24) & 15;
+ int oparg = (encoded_op << 8) >> 20;
+ int cmparg = (encoded_op << 20) >> 20;
+ int oldval = 0, ret;
+ if (encoded_op & (FUTEX_OP_OPARG_SHIFT << 28))
+ oparg = 1 << oparg;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ pagefault_disable();
+
+ switch (op) {
+ case FUTEX_OP_SET:
+ __futex_atomic_op("mov %3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ADD:
+ __futex_atomic_op("addl %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_OR:
+ __futex_atomic_op("or %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_ANDN:
+ __futex_atomic_op("andnot %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ case FUTEX_OP_XOR:
+ __futex_atomic_op("xor %0,%3,%1\n", ret, oldval, uaddr, oparg);
+ break;
+ default:
+ ret = -ENOSYS;
+ }
+
+ pagefault_enable();
+
+ if (!ret) {
+ switch (cmp) {
+ case FUTEX_OP_CMP_EQ: ret = (oldval == cmparg); break;
+ case FUTEX_OP_CMP_NE: ret = (oldval != cmparg); break;
+ case FUTEX_OP_CMP_LT: ret = (oldval < cmparg); break;
+ case FUTEX_OP_CMP_GE: ret = (oldval >= cmparg); break;
+ case FUTEX_OP_CMP_LE: ret = (oldval <= cmparg); break;
+ case FUTEX_OP_CMP_GT: ret = (oldval > cmparg); break;
+ default: ret = -ENOSYS;
+ }
+ }
+ return ret;
+}
+
+static inline int
+futex_atomic_cmpxchg_inatomic(int __user *uaddr, int oldval, int newval)
+{
+ int prev, cmp;
+
+ if (!access_ok(VERIFY_WRITE, uaddr, sizeof(int)))
+ return -EFAULT;
+
+ __asm__ __volatile__ (
+ __ASM_SMP_MB
+ "1: ldl_l %0,0(%2)\n"
+ " cmpeq %0,%3,%1\n"
+ " beq %1,3f\n"
+ " mov %4,%1\n"
+ "2: stl_c %1,0(%2)\n"
+ " beq %1,4f\n"
+ "3: .subsection 2\n"
+ "4: br 1b\n"
+ " .previous\n"
+ " .section __ex_table,\"a\"\n"
+ " .long 1b-.\n"
+ " lda $31,3b-1b(%0)\n"
+ " .long 2b-.\n"
+ " lda $31,3b-2b(%0)\n"
+ " .previous\n"
+ : "=&r"(prev), "=&r"(cmp)
+ : "r"(uaddr), "r"((long)oldval), "r"(newval)
+ : "memory");
+
+ return prev;
+}
+
+#endif /* __KERNEL__ */
+#endif /* _ASM_ALPHA_FUTEX_H */
diff --git a/arch/alpha/include/asm/percpu.h b/arch/alpha/include/asm/percpu.h
index e9e0bb5a23b..06c5c7a4afd 100644
--- a/arch/alpha/include/asm/percpu.h
+++ b/arch/alpha/include/asm/percpu.h
@@ -1,7 +1,9 @@
#ifndef __ALPHA_PERCPU_H
#define __ALPHA_PERCPU_H
+
#include <linux/compiler.h>
#include <linux/threads.h>
+#include <linux/percpu-defs.h>
/*
* Determine the real variable name from the name visible in the
@@ -73,6 +75,28 @@ extern unsigned long __per_cpu_offset[NR_CPUS];
#endif /* SMP */
-#include <asm-generic/percpu.h>
+#ifdef CONFIG_SMP
+#define PER_CPU_BASE_SECTION ".data.percpu"
+#else
+#define PER_CPU_BASE_SECTION ".data"
+#endif
+
+#ifdef CONFIG_SMP
+
+#ifdef MODULE
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#else
+#define PER_CPU_SHARED_ALIGNED_SECTION ".shared_aligned"
+#endif
+#define PER_CPU_FIRST_SECTION ".first"
+
+#else
+
+#define PER_CPU_SHARED_ALIGNED_SECTION ""
+#define PER_CPU_FIRST_SECTION ""
+
+#endif
+
+#define PER_CPU_ATTRIBUTES
#endif /* __ALPHA_PERCPU_H */
diff --git a/arch/alpha/include/asm/uaccess.h b/arch/alpha/include/asm/uaccess.h
index 163f3053001..b49ec2f8d6e 100644
--- a/arch/alpha/include/asm/uaccess.h
+++ b/arch/alpha/include/asm/uaccess.h
@@ -507,5 +507,7 @@ struct exception_table_entry
(pc) + (_fixup)->fixup.bits.nextinsn; \
})
+#define ARCH_HAS_SORT_EXTABLE
+#define ARCH_HAS_SEARCH_EXTABLE
#endif /* __ALPHA_UACCESS_H */
diff --git a/arch/alpha/kernel/Makefile b/arch/alpha/kernel/Makefile
index a427538252f..7739a62440a 100644
--- a/arch/alpha/kernel/Makefile
+++ b/arch/alpha/kernel/Makefile
@@ -8,7 +8,7 @@ EXTRA_CFLAGS := -Werror -Wno-sign-compare
obj-y := entry.o traps.o process.o init_task.o osf_sys.o irq.o \
irq_alpha.o signal.o setup.o ptrace.o time.o \
- alpha_ksyms.o systbls.o err_common.o io.o binfmt_loader.o
+ alpha_ksyms.o systbls.o err_common.o io.o
obj-$(CONFIG_VGA_HOSE) += console.o
obj-$(CONFIG_SMP) += smp.o
@@ -43,6 +43,10 @@ else
# Misc support
obj-$(CONFIG_ALPHA_SRM) += srmcons.o
+ifdef CONFIG_BINFMT_AOUT
+obj-y += binfmt_loader.o
+endif
+
# Core logic support
obj-$(CONFIG_ALPHA_APECS) += core_apecs.o
obj-$(CONFIG_ALPHA_CIA) += core_cia.o
diff --git a/arch/alpha/kernel/binfmt_loader.c b/arch/alpha/kernel/binfmt_loader.c
index 4a0af906b00..3fcfad41013 100644
--- a/arch/alpha/kernel/binfmt_loader.c
+++ b/arch/alpha/kernel/binfmt_loader.c
@@ -46,6 +46,6 @@ static struct linux_binfmt loader_format = {
static int __init init_loader_binfmt(void)
{
- return register_binfmt(&loader_format);
+ return insert_binfmt(&loader_format);
}
arch_initcall(init_loader_binfmt);
diff --git a/arch/alpha/kernel/err_ev6.c b/arch/alpha/kernel/err_ev6.c
index 985e5c1681a..8ca6345bf13 100644
--- a/arch/alpha/kernel/err_ev6.c
+++ b/arch/alpha/kernel/err_ev6.c
@@ -229,7 +229,7 @@ ev6_process_logout_frame(struct el_common *mchk_header, int print)
}
void
-ev6_machine_check(u64 vector, u64 la_ptr)
+ev6_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;
diff --git a/arch/alpha/kernel/err_ev7.c b/arch/alpha/kernel/err_ev7.c
index 73770c6ca01..d738a67112d 100644
--- a/arch/alpha/kernel/err_ev7.c
+++ b/arch/alpha/kernel/err_ev7.c
@@ -117,7 +117,7 @@ ev7_collect_logout_frame_subpackets(struct el_subpacket *el_ptr,
}
void
-ev7_machine_check(u64 vector, u64 la_ptr)
+ev7_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
char *saved_err_prefix = err_print_prefix;
@@ -246,7 +246,7 @@ ev7_process_pal_subpacket(struct el_subpacket *header)
switch(header->type) {
case EL_TYPE__PAL__LOGOUT_FRAME:
- printk("%s*** MCHK occurred on LPID %ld (RBOX %llx)\n",
+ printk("%s*** MCHK occurred on LPID %lld (RBOX %llx)\n",
err_print_prefix,
packet->by_type.logout.whami,
packet->by_type.logout.rbox_whami);
diff --git a/arch/alpha/kernel/err_impl.h b/arch/alpha/kernel/err_impl.h
index 3c12258158e..0c010ca4611 100644
--- a/arch/alpha/kernel/err_impl.h
+++ b/arch/alpha/kernel/err_impl.h
@@ -60,26 +60,26 @@ extern struct ev7_lf_subpackets *
ev7_collect_logout_frame_subpackets(struct el_subpacket *,
struct ev7_lf_subpackets *);
extern void ev7_register_error_handlers(void);
-extern void ev7_machine_check(u64, u64);
+extern void ev7_machine_check(unsigned long, unsigned long);
/*
* err_ev6.c
*/
extern void ev6_register_error_handlers(void);
extern int ev6_process_logout_frame(struct el_common *, int);
-extern void ev6_machine_check(u64, u64);
+extern void ev6_machine_check(unsigned long, unsigned long);
/*
* err_marvel.c
*/
-extern void marvel_machine_check(u64, u64);
+extern void marvel_machine_check(unsigned long, unsigned long);
extern void marvel_register_error_handlers(void);
/*
* err_titan.c
*/
extern int titan_process_logout_frame(struct el_common *, int);
-extern void titan_machine_check(u64, u64);
+extern void titan_machine_check(unsigned long, unsigned long);
extern void titan_register_error_handlers(void);
extern int privateer_process_logout_frame(struct el_common *, int);
-extern void privateer_machine_check(u64, u64);
+extern void privateer_machine_check(unsigned long, unsigned long);
diff --git a/arch/alpha/kernel/err_marvel.c b/arch/alpha/kernel/err_marvel.c
index 6bfd243efba..52a79dfc13c 100644
--- a/arch/alpha/kernel/err_marvel.c
+++ b/arch/alpha/kernel/err_marvel.c
@@ -1042,7 +1042,7 @@ marvel_process_logout_frame(struct ev7_lf_subpackets *lf_subpackets, int print)
}
void
-marvel_machine_check(u64 vector, u64 la_ptr)
+marvel_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_subpacket *el_ptr = (struct el_subpacket *)la_ptr;
int (*process_frame)(struct ev7_lf_subpackets *, int) = NULL;
diff --git a/arch/alpha/kernel/err_titan.c b/arch/alpha/kernel/err_titan.c
index c7e28a88d6e..f7ed97ce0df 100644
--- a/arch/alpha/kernel/err_titan.c
+++ b/arch/alpha/kernel/err_titan.c
@@ -380,7 +380,7 @@ titan_process_logout_frame(struct el_common *mchk_header, int print)
}
void
-titan_machine_check(u64 vector, u64 la_ptr)
+titan_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;
struct el_TITAN_sysdata_mcheck *tmchk =
@@ -702,7 +702,7 @@ privateer_process_logout_frame(struct el_common *mchk_header, int print)
}
void
-privateer_machine_check(u64 vector, u64 la_ptr)
+privateer_machine_check(unsigned long vector, unsigned long la_ptr)
{
struct el_common *mchk_header = (struct el_common *)la_ptr;
struct el_TITAN_sysdata_mcheck *tmchk =
diff --git a/arch/alpha/kernel/proto.h b/arch/alpha/kernel/proto.h
index 567f2598d09..3d2627ec986 100644
--- a/arch/alpha/kernel/proto.h
+++ b/arch/alpha/kernel/proto.h
@@ -36,7 +36,6 @@ extern void cia_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern struct pci_ops irongate_pci_ops;
extern int irongate_pci_clr_err(void);
extern void irongate_init_arch(void);
-extern void irongate_machine_check(u64, u64);
#define irongate_pci_tbi ((void *)0)
/* core_lca.c */
@@ -49,7 +48,7 @@ extern void lca_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern struct pci_ops marvel_pci_ops;
extern void marvel_init_arch(void);
extern void marvel_kill_arch(int);
-extern void marvel_machine_check(u64, u64);
+extern void marvel_machine_check(unsigned long, unsigned long);
extern void marvel_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern int marvel_pa_to_nid(unsigned long);
extern int marvel_cpuid_to_nid(int);
@@ -86,7 +85,7 @@ extern void t2_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern struct pci_ops titan_pci_ops;
extern void titan_init_arch(void);
extern void titan_kill_arch(int);
-extern void titan_machine_check(u64, u64);
+extern void titan_machine_check(unsigned long, unsigned long);
extern void titan_pci_tbi(struct pci_controller *, dma_addr_t, dma_addr_t);
extern struct _alpha_agp_info *titan_agp_info(void);
diff --git a/arch/alpha/mm/extable.c b/arch/alpha/mm/extable.c
index dc7aeda1577..62dc379d301 100644
--- a/arch/alpha/mm/extable.c
+++ b/arch/alpha/mm/extable.c
@@ -3,11 +3,49 @@
*/
#include <linux/module.h>
+#include <linux/sort.h>
#include <asm/uaccess.h>
+static inline unsigned long ex_to_addr(const struct exception_table_entry *x)
+{
+ return (unsigned long)&x->insn + x->insn;
+}
+
+static void swap_ex(void *a, void *b, int size)
+{
+ struct exception_table_entry *ex_a = a, *ex_b = b;
+ unsigned long addr_a = ex_to_addr(ex_a), addr_b = ex_to_addr(ex_b);
+ unsigned int t = ex_a->fixup.unit;
+
+ ex_a->fixup.unit = ex_b->fixup.unit;
+ ex_b->fixup.unit = t;
+ ex_a->insn = (int)(addr_b - (unsigned long)&ex_a->insn);
+ ex_b->insn = (int)(addr_a - (unsigned long)&ex_b->insn);
+}
+
+/*
+ * The exception table needs to be sorted so that the binary
+ * search that we use to find entries in it works properly.
+ * This is used both for the kernel exception table and for
+ * the exception tables of modules that get loaded.
+ */
+static int cmp_ex(const void *a, const void *b)
+{
+ const struct exception_table_entry *x = a, *y = b;
+
+ /* avoid overflow */
+ if (ex_to_addr(x) > ex_to_addr(y))
+ return 1;
+ if (ex_to_addr(x) < ex_to_addr(y))
+ return -1;
+ return 0;
+}
+
void sort_extable(struct exception_table_entry *start,
struct exception_table_entry *finish)
{
+ sort(start, finish - start, sizeof(struct exception_table_entry),
+ cmp_ex, swap_ex);
}
const struct exception_table_entry *
@@ -20,7 +58,7 @@ search_extable(const struct exception_table_entry *first,
unsigned long mid_value;
mid = (last - first) / 2 + first;
- mid_value = (unsigned long)&mid->insn + mid->insn;
+ mid_value = ex_to_addr(mid);
if (mid_value == value)
return mid;
else if (mid_value < value)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig
index e02b893fb90..9d02cdb15b2 100644
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
@@ -273,6 +273,7 @@ config ARCH_EP93XX
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
+ select ARCH_HAS_HOLES_MEMORYMODEL
help
This enables support for the Cirrus EP93xx series of CPUs.
@@ -454,6 +455,7 @@ config ARCH_MXC
select ARCH_MTD_XIP
select GENERIC_GPIO
select ARCH_REQUIRE_GPIOLIB
+ select HAVE_CLK
help
Support for Freescale MXC/iMX-based family of processors
@@ -486,8 +488,6 @@ config ARCH_PXA
select HAVE_CLK
select COMMON_CLKDEV
select ARCH_REQUIRE_GPIOLIB
- select HAVE_CLK
- select COMMON_CLKDEV
select GENERIC_TIME
select GENERIC_CLOCKEVENTS
select TICK_ONESHOT
@@ -585,6 +585,8 @@ config ARCH_DAVINCI
select ARCH_REQUIRE_GPIOLIB
select HAVE_CLK
select ZONE_DMA
+ select HAVE_IDE
+ select COMMON_CLKDEV
help
Support for TI's DaVinci platform.
@@ -740,6 +742,56 @@ if !MMU
source "arch/arm/Kconfig-nommu"
endif
+config ARM_ERRATA_411920
+ bool "ARM errata: Invalidation of the Instruction Cache operation can fail"
+ depends on CPU_V6 && !SMP
+ help
+ Invalidation of the Instruction Cache operation can
+ fail. This erratum is present in 1136 (before r1p4), 1156 and 1176.
+ It does not affect the MPCore. This option enables the ARM Ltd.
+ recommended workaround.
+
+config ARM_ERRATA_430973
+ bool "ARM errata: Stale prediction on replaced interworking branch"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 430973 Cortex-A8
+ (r1p0..r1p2) erratum. If a code sequence containing an ARM/Thumb
+ interworking branch is replaced with another code sequence at the
+ same virtual address, whether due to self-modifying code or virtual
+ to physical address re-mapping, Cortex-A8 does not recover from the
+ stale interworking branch prediction. This results in Cortex-A8
+ executing the new code sequence in the incorrect ARM or Thumb state.
+ The workaround enables the BTB/BTAC operations by setting ACTLR.IBE
+ and also flushes the branch target cache at every context switch.
+ Note that setting specific bits in the ACTLR register may not be
+ available in non-secure mode.
+
+config ARM_ERRATA_458693
+ bool "ARM errata: Processor deadlock when a false hazard is created"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 458693 Cortex-A8 (r2p0)
+ erratum. For very specific sequences of memory operations, it is
+ possible for a hazard condition intended for a cache line to instead
+ be incorrectly associated with a different cache line. This false
+ hazard might then cause a processor deadlock. The workaround enables
+ the L1 caching of the NEON accesses and disables the PLD instruction
+ in the ACTLR register. Note that setting specific bits in the ACTLR
+ register may not be available in non-secure mode.
+
+config ARM_ERRATA_460075
+ bool "ARM errata: Data written to the L2 cache can be overwritten with stale data"
+ depends on CPU_V7
+ help
+ This option enables the workaround for the 460075 Cortex-A8 (r2p0)
+ erratum. Any asynchronous access to the L2 cache may encounter a
+ situation in which recent store transactions to the L2 cache are lost
+ and overwritten with stale memory contents from external memory. The
+ workaround disables the write-allocate mode for the L2 cache via the
+ ACTLR register. Note that setting specific bits in the ACTLR register
+ may not be available in non-secure mode.
+
endmenu
source "arch/arm/common/Kconfig"
@@ -925,10 +977,9 @@ config OABI_COMPAT
UNPREDICTABLE (in fact it can be predicted that it won't work
at all). If in doubt say Y.
-config ARCH_FLATMEM_HAS_HOLES
+config ARCH_HAS_HOLES_MEMORYMODEL
bool
- default y
- depends on FLATMEM
+ default n
# Discontigmem is deprecated
config ARCH_DISCONTIGMEM_ENABLE
@@ -1171,12 +1222,6 @@ config CPU_FREQ_IMX
If in doubt, say N.
-config CPU_FREQ_PXA
- bool
- depends on CPU_FREQ && ARCH_PXA && PXA25x
- default y
- select CPU_FREQ_DEFAULT_GOV_USERSPACE
-
endif
source "drivers/cpuidle/Kconfig"
diff --git a/arch/arm/common/gic.c b/arch/arm/common/gic.c
index c6884ba1d5e..3e1714c6523 100644
--- a/arch/arm/common/gic.c
+++ b/arch/arm/common/gic.c
@@ -253,9 +253,9 @@ void __cpuinit gic_cpu_init(unsigned int gic_nr, void __iomem *base)
}
#ifdef CONFIG_SMP
-void gic_raise_softirq(cpumask_t cpumask, unsigned int irq)
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq)
{
- unsigned long map = *cpus_addr(cpumask);
+ unsigned long map = *cpus_addr(*mask);
/* this always happens on GIC0 */
writel(map << 16 | irq, gic_data[0].dist_base + GIC_DIST_SOFTINT);
diff --git a/arch/arm/configs/davinci_all_defconfig b/arch/arm/configs/davinci_all_defconfig
new file mode 100644
index 00000000000..eb2738b5be5
--- /dev/null
+++ b/arch/arm/configs/davinci_all_defconfig
@@ -0,0 +1,1784 @@
+#
+# Automatically generated make config: don't edit
+# Linux kernel version: 2.6.30-rc2
+# Wed Apr 15 08:16:53 2009
+#
+CONFIG_ARM=y
+CONFIG_SYS_SUPPORTS_APM_EMULATION=y
+CONFIG_GENERIC_GPIO=y
+CONFIG_GENERIC_TIME=y
+CONFIG_GENERIC_CLOCKEVENTS=y
+CONFIG_MMU=y
+# CONFIG_NO_IOPORT is not set
+CONFIG_GENERIC_HARDIRQS=y
+CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
+CONFIG_LOCKDEP_SUPPORT=y
+CONFIG_TRACE_IRQFLAGS_SUPPORT=y
+CONFIG_HARDIRQS_SW_RESEND=y
+CONFIG_GENERIC_IRQ_PROBE=y
+CONFIG_RWSEM_GENERIC_SPINLOCK=y
+# CONFIG_ARCH_HAS_ILOG2_U32 is not set
+# CONFIG_ARCH_HAS_ILOG2_U64 is not set
+CONFIG_GENERIC_HWEIGHT=y
+CONFIG_GENERIC_CALIBRATE_DELAY=y
+CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
+CONFIG_VECTORS_BASE=0xffff0000
+CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
+
+#
+# General setup
+#
+CONFIG_EXPERIMENTAL=y
+CONFIG_BROKEN_ON_SMP=y
+CONFIG_LOCK_KERNEL=y
+CONFIG_INIT_ENV_ARG_LIMIT=32
+CONFIG_LOCALVERSION=""
+CONFIG_LOCALVERSION_AUTO=y
+# CONFIG_SWAP is not set
+CONFIG_SYSVIPC=y
+CONFIG_SYSVIPC_SYSCTL=y
+CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
+# CONFIG_BSD_PROCESS_ACCT is not set
+# CONFIG_TASKSTATS is not set
+# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
+CONFIG_IKCONFIG=y
+CONFIG_IKCONFIG_PROC=y
+CONFIG_LOG_BUF_SHIFT=14
+CONFIG_GROUP_SCHED=y
+CONFIG_FAIR_GROUP_SCHED=y
+# CONFIG_RT_GROUP_SCHED is not set
+CONFIG_USER_SCHED=y
+# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
+CONFIG_SYSFS_DEPRECATED=y
+CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_RELAY is not set
+# CONFIG_NAMESPACES is not set
+CONFIG_BLK_DEV_INITRD=y
+CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
+CONFIG_CC_OPTIMIZE_FOR_SIZE=y
+CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
+CONFIG_EMBEDDED=y
+CONFIG_UID16=y
+CONFIG_SYSCTL_SYSCALL=y
+CONFIG_KALLSYMS=y
+# CONFIG_KALLSYMS_ALL is not set
+# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
+CONFIG_HOTPLUG=y
+CONFIG_PRINTK=y
+CONFIG_BUG=y
+CONFIG_ELF_CORE=y
+CONFIG_BASE_FULL=y
+CONFIG_FUTEX=y
+CONFIG_EPOLL=y
+CONFIG_SIGNALFD=y
+CONFIG_TIMERFD=y
+CONFIG_EVENTFD=y
+CONFIG_SHMEM=y
+CONFIG_AIO=y
+CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
+# CONFIG_SLAB is not set
+CONFIG_SLUB=y
+# CONFIG_SLOB is not set
+# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+CONFIG_HAVE_OPROFILE=y
+# CONFIG_KPROBES is not set
+CONFIG_HAVE_KPROBES=y
+CONFIG_HAVE_KRETPROBES=y
+CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
+CONFIG_SLABINFO=y
+CONFIG_RT_MUTEXES=y
+CONFIG_BASE_SMALL=0
+CONFIG_MODULES=y
+# CONFIG_MODULE_FORCE_LOAD is not set
+CONFIG_MODULE_UNLOAD=y
+CONFIG_MODULE_FORCE_UNLOAD=y
+CONFIG_MODVERSIONS=y
+# CONFIG_MODULE_SRCVERSION_ALL is not set
+CONFIG_BLOCK=y
+# CONFIG_LBD is not set
+# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
+
+#
+# IO Schedulers
+#
+CONFIG_IOSCHED_NOOP=y
+CONFIG_IOSCHED_AS=y
+# CONFIG_IOSCHED_DEADLINE is not set
+# CONFIG_IOSCHED_CFQ is not set
+CONFIG_DEFAULT_AS=y
+# CONFIG_DEFAULT_DEADLINE is not set
+# CONFIG_DEFAULT_CFQ is not set
+# CONFIG_DEFAULT_NOOP is not set
+CONFIG_DEFAULT_IOSCHED="anticipatory"
+# CONFIG_FREEZER is not set
+
+#
+# System Type
+#
+# CONFIG_ARCH_AAEC2000 is not set
+# CONFIG_ARCH_INTEGRATOR is not set
+# CONFIG_ARCH_REALVIEW is not set
+# CONFIG_ARCH_VERSATILE is not set
+# CONFIG_ARCH_AT91 is not set
+# CONFIG_ARCH_CLPS711X is not set
+# CONFIG_ARCH_EBSA110 is not set
+# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
+# CONFIG_ARCH_FOOTBRIDGE is not set
+# CONFIG_ARCH_NETX is not set
+# CONFIG_ARCH_H720X is not set
+# CONFIG_ARCH_IMX is not set
+# CONFIG_ARCH_IOP13XX is not set
+# CONFIG_ARCH_IOP32X is not set
+# CONFIG_ARCH_IOP33X is not set
+# CONFIG_ARCH_IXP23XX is not set
+# CONFIG_ARCH_IXP2000 is not set
+# CONFIG_ARCH_IXP4XX is not set
+# CONFIG_ARCH_L7200 is not set
+# CONFIG_ARCH_KIRKWOOD is not set
+# CONFIG_ARCH_KS8695 is not set
+# CONFIG_ARCH_NS9XXX is not set
+# CONFIG_ARCH_LOKI is not set
+# CONFIG_ARCH_MV78XX0 is not set
+# CONFIG_ARCH_MXC is not set
+# CONFIG_ARCH_ORION5X is not set
+# CONFIG_ARCH_PNX4008 is not set
+# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
+# CONFIG_ARCH_RPC is not set
+# CONFIG_ARCH_SA1100 is not set
+# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
+# CONFIG_ARCH_SHARK is not set
+# CONFIG_ARCH_LH7A40X is not set
+CONFIG_ARCH_DAVINCI=y
+# CONFIG_ARCH_OMAP is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
+
+#
+# TI DaVinci Implementations
+#
+
+#
+# DaVinci Core Type
+#
+CONFIG_ARCH_DAVINCI_DM644x=y
+
+#
+# DaVinci Board Type
+#
+CONFIG_MACH_DAVINCI_EVM=y
+CONFIG_DAVINCI_MUX=y
+CONFIG_DAVINCI_MUX_DEBUG=y
+CONFIG_DAVINCI_MUX_WARNINGS=y
+CONFIG_DAVINCI_RESET_CLOCKS=y
+
+#
+# Processor Type
+#
+CONFIG_CPU_32=y
+CONFIG_CPU_ARM926T=y
+CONFIG_CPU_32v5=y
+CONFIG_CPU_ABRT_EV5TJ=y
+CONFIG_CPU_PABRT_NOIFAR=y
+CONFIG_CPU_CACHE_VIVT=y
+CONFIG_CPU_COPY_V4WB=y
+CONFIG_CPU_TLB_V4WBI=y
+CONFIG_CPU_CP15=y
+CONFIG_CPU_CP15_MMU=y
+
+#
+# Processor Features
+#
+CONFIG_ARM_THUMB=y
+# CONFIG_CPU_ICACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_DISABLE is not set
+# CONFIG_CPU_DCACHE_WRITETHROUGH is not set
+# CONFIG_CPU_CACHE_ROUND_ROBIN is not set
+# CONFIG_OUTER_CACHE is not set
+CONFIG_COMMON_CLKDEV=y
+
+#
+# Bus support
+#
+# CONFIG_PCI_SYSCALL is not set
+# CONFIG_ARCH_SUPPORTS_MSI is not set
+# CONFIG_PCCARD is not set
+
+#
+# Kernel Features
+#
+CONFIG_TICK_ONESHOT=y
+CONFIG_NO_HZ=y
+CONFIG_HIGH_RES_TIMERS=y
+CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
+CONFIG_PREEMPT=y
+CONFIG_HZ=100
+CONFIG_AEABI=y
+# CONFIG_OABI_COMPAT is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
+CONFIG_SELECT_MEMORY_MODEL=y
+CONFIG_FLATMEM_MANUAL=y
+# CONFIG_DISCONTIGMEM_MANUAL is not set
+# CONFIG_SPARSEMEM_MANUAL is not set
+CONFIG_FLATMEM=y
+CONFIG_FLAT_NODE_MEM_MAP=y
+CONFIG_PAGEFLAGS_EXTENDED=y
+CONFIG_SPLIT_PTLOCK_CPUS=4096
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=1
+CONFIG_BOUNCE=y
+CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_LEDS=y
+# CONFIG_LEDS_CPU is not set
+CONFIG_ALIGNMENT_TRAP=y
+
+#
+# Boot options
+#
+CONFIG_ZBOOT_ROM_TEXT=0x0
+CONFIG_ZBOOT_ROM_BSS=0x0
+CONFIG_CMDLINE=""
+# CONFIG_XIP_KERNEL is not set
+# CONFIG_KEXEC is not set
+
+#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
+# Floating point emulation
+#
+
+#
+# At least one emulation must be selected
+#
+# CONFIG_VFP is not set
+
+#
+# Userspace binary formats
+#
+CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
+# CONFIG_BINFMT_AOUT is not set
+# CONFIG_BINFMT_MISC is not set
+
+#
+# Power management options
+#
+# CONFIG_PM is not set
+CONFIG_ARCH_SUSPEND_POSSIBLE=y
+CONFIG_NET=y
+
+#
+# Networking options
+#
+CONFIG_PACKET=y
+# CONFIG_PACKET_MMAP is not set
+CONFIG_UNIX=y
+CONFIG_XFRM=y
+# CONFIG_XFRM_USER is not set
+# CONFIG_XFRM_SUB_POLICY is not set
+# CONFIG_XFRM_MIGRATE is not set
+# CONFIG_XFRM_STATISTICS is not set
+# CONFIG_NET_KEY is not set
+CONFIG_INET=y
+# CONFIG_IP_MULTICAST is not set
+# CONFIG_IP_ADVANCED_ROUTER is not set
+CONFIG_IP_FIB_HASH=y
+CONFIG_IP_PNP=y
+CONFIG_IP_PNP_DHCP=y
+# CONFIG_IP_PNP_BOOTP is not set
+# CONFIG_IP_PNP_RARP is not set
+# CONFIG_NET_IPIP is not set
+# CONFIG_NET_IPGRE is not set
+# CONFIG_ARPD is not set
+# CONFIG_SYN_COOKIES is not set
+# CONFIG_INET_AH is not set
+# CONFIG_INET_ESP is not set
+# CONFIG_INET_IPCOMP is not set
+# CONFIG_INET_XFRM_TUNNEL is not set
+CONFIG_INET_TUNNEL=m
+CONFIG_INET_XFRM_MODE_TRANSPORT=y
+CONFIG_INET_XFRM_MODE_TUNNEL=y
+CONFIG_INET_XFRM_MODE_BEET=y
+# CONFIG_INET_LRO is not set
+CONFIG_INET_DIAG=y
+CONFIG_INET_TCP_DIAG=y
+# CONFIG_TCP_CONG_ADVANCED is not set
+CONFIG_TCP_CONG_CUBIC=y
+CONFIG_DEFAULT_TCP_CONG="cubic"
+# CONFIG_TCP_MD5SIG is not set
+CONFIG_IPV6=m
+# CONFIG_IPV6_PRIVACY is not set
+# CONFIG_IPV6_ROUTER_PREF is not set
+# CONFIG_IPV6_OPTIMISTIC_DAD is not set
+# CONFIG_INET6_AH is not set
+# CONFIG_INET6_ESP is not set
+# CONFIG_INET6_IPCOMP is not set
+# CONFIG_IPV6_MIP6 is not set
+# CONFIG_INET6_XFRM_TUNNEL is not set
+# CONFIG_INET6_TUNNEL is not set
+CONFIG_INET6_XFRM_MODE_TRANSPORT=m
+CONFIG_INET6_XFRM_MODE_TUNNEL=m
+CONFIG_INET6_XFRM_MODE_BEET=m
+# CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION is not set
+CONFIG_IPV6_SIT=m
+CONFIG_IPV6_NDISC_NODETYPE=y
+# CONFIG_IPV6_TUNNEL is not set
+# CONFIG_IPV6_MULTIPLE_TABLES is not set
+# CONFIG_IPV6_MROUTE is not set
+# CONFIG_NETWORK_SECMARK is not set
+CONFIG_NETFILTER=y
+# CONFIG_NETFILTER_DEBUG is not set
+CONFIG_NETFILTER_ADVANCED=y
+
+#
+# Core Netfilter Configuration
+#
+# CONFIG_NETFILTER_NETLINK_QUEUE is not set
+# CONFIG_NETFILTER_NETLINK_LOG is not set
+# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_XTABLES is not set
+# CONFIG_IP_VS is not set
+
+#
+# IP: Netfilter Configuration
+#
+# CONFIG_NF_DEFRAG_IPV4 is not set
+# CONFIG_IP_NF_QUEUE is not set
+# CONFIG_IP_NF_IPTABLES is not set
+# CONFIG_IP_NF_ARPTABLES is not set
+
+#
+# IPv6: Netfilter Configuration
+#
+# CONFIG_IP6_NF_QUEUE is not set
+# CONFIG_IP6_NF_IPTABLES is not set
+# CONFIG_IP_DCCP is not set
+# CONFIG_IP_SCTP is not set
+# CONFIG_TIPC is not set
+# CONFIG_ATM is not set
+# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
+# CONFIG_VLAN_8021Q is not set
+# CONFIG_DECNET is not set
+# CONFIG_LLC2 is not set
+# CONFIG_IPX is not set
+# CONFIG_ATALK is not set
+# CONFIG_X25 is not set
+# CONFIG_LAPB is not set
+# CONFIG_ECONET is not set
+# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
+# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
+
+#
+# Network testing
+#
+# CONFIG_NET_PKTGEN is not set
+# CONFIG_HAMRADIO is not set
+# CONFIG_CAN is not set
+# CONFIG_IRDA is not set
+# CONFIG_BT is not set
+# CONFIG_AF_RXRPC is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
+# CONFIG_RFKILL is not set
+# CONFIG_NET_9P is not set
+
+#
+# Device Drivers
+#
+
+#
+# Generic Driver Options
+#
+CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
+CONFIG_STANDALONE=y
+CONFIG_PREVENT_FIRMWARE_BUILD=y
+# CONFIG_FW_LOADER is not set
+# CONFIG_DEBUG_DRIVER is not set
+# CONFIG_DEBUG_DEVRES is not set
+# CONFIG_SYS_HYPERVISOR is not set
+# CONFIG_CONNECTOR is not set
+CONFIG_MTD=m
+# CONFIG_MTD_DEBUG is not set
+# CONFIG_MTD_CONCAT is not set
+CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
+# CONFIG_MTD_REDBOOT_PARTS is not set
+# CONFIG_MTD_AFS_PARTS is not set
+# CONFIG_MTD_AR7_PARTS is not set
+
+#
+# User Modules And Translation Layers
+#
+CONFIG_MTD_CHAR=m
+CONFIG_MTD_BLKDEVS=m
+CONFIG_MTD_BLOCK=m
+# CONFIG_MTD_BLOCK_RO is not set
+# CONFIG_FTL is not set
+# CONFIG_NFTL is not set
+# CONFIG_INFTL is not set
+# CONFIG_RFD_FTL is not set
+# CONFIG_SSFDC is not set
+# CONFIG_MTD_OOPS is not set
+
+#
+# RAM/ROM/Flash chip drivers
+#
+CONFIG_MTD_CFI=m
+# CONFIG_MTD_JEDECPROBE is not set
+CONFIG_MTD_GEN_PROBE=m
+# CONFIG_MTD_CFI_ADV_OPTIONS is not set
+CONFIG_MTD_MAP_BANK_WIDTH_1=y
+CONFIG_MTD_MAP_BANK_WIDTH_2=y
+CONFIG_MTD_MAP_BANK_WIDTH_4=y
+# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
+# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
+CONFIG_MTD_CFI_I1=y
+CONFIG_MTD_CFI_I2=y
+# CONFIG_MTD_CFI_I4 is not set
+# CONFIG_MTD_CFI_I8 is not set
+# CONFIG_MTD_CFI_INTELEXT is not set
+CONFIG_MTD_CFI_AMDSTD=m
+# CONFIG_MTD_CFI_STAA is not set
+CONFIG_MTD_CFI_UTIL=m
+# CONFIG_MTD_RAM is not set
+# CONFIG_MTD_ROM is not set
+# CONFIG_MTD_ABSENT is not set
+
+#
+# Mapping drivers for chip access
+#
+# CONFIG_MTD_COMPLEX_MAPPINGS is not set
+CONFIG_MTD_PHYSMAP=m
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
+# CONFIG_MTD_ARM_INTEGRATOR is not set
+# CONFIG_MTD_PLATRAM is not set
+
+#
+# Self-contained MTD device drivers
+#
+# CONFIG_MTD_SLRAM is not set
+# CONFIG_MTD_PHRAM is not set
+# CONFIG_MTD_MTDRAM is not set
+# CONFIG_MTD_BLOCK2MTD is not set
+
+#
+# Disk-On-Chip Device Drivers
+#
+# CONFIG_MTD_DOC2000 is not set
+# CONFIG_MTD_DOC2001 is not set
+# CONFIG_MTD_DOC2001PLUS is not set
+CONFIG_MTD_NAND=m
+# CONFIG_MTD_NAND_VERIFY_WRITE is not set
+# CONFIG_MTD_NAND_ECC_SMC is not set
+# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
+CONFIG_MTD_NAND_IDS=m
+# CONFIG_MTD_NAND_DISKONCHIP is not set
+# CONFIG_MTD_NAND_NANDSIM is not set
+# CONFIG_MTD_NAND_PLATFORM is not set
+# CONFIG_MTD_ALAUDA is not set
+CONFIG_MTD_NAND_DAVINCI=m
+# CONFIG_MTD_ONENAND is not set
+
+#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
+# UBI - Unsorted block images
+#
+# CONFIG_MTD_UBI is not set
+# CONFIG_PARPORT is not set
+CONFIG_BLK_DEV=y
+# CONFIG_BLK_DEV_COW_COMMON is not set
+CONFIG_BLK_DEV_LOOP=m
+# CONFIG_BLK_DEV_CRYPTOLOOP is not set
+# CONFIG_BLK_DEV_NBD is not set
+# CONFIG_BLK_DEV_UB is not set
+CONFIG_BLK_DEV_RAM=y
+CONFIG_BLK_DEV_RAM_COUNT=1
+CONFIG_BLK_DEV_RAM_SIZE=32768
+# CONFIG_BLK_DEV_XIP is not set
+# CONFIG_CDROM_PKTCDVD is not set
+# CONFIG_ATA_OVER_ETH is not set
+CONFIG_MISC_DEVICES=y
+# CONFIG_ICS932S401 is not set
+# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+CONFIG_EEPROM_AT24=y
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
+CONFIG_HAVE_IDE=y
+CONFIG_IDE=m
+
+#
+# Please see Documentation/ide/ide.txt for help/info on IDE drives
+#
+CONFIG_IDE_XFER_MODE=y
+CONFIG_IDE_TIMINGS=y
+# CONFIG_BLK_DEV_IDE_SATA is not set
+CONFIG_IDE_GD=m
+CONFIG_IDE_GD_ATA=y
+# CONFIG_IDE_GD_ATAPI is not set
+# CONFIG_BLK_DEV_IDECD is not set
+# CONFIG_BLK_DEV_IDETAPE is not set
+# CONFIG_IDE_TASK_IOCTL is not set
+CONFIG_IDE_PROC_FS=y
+
+#
+# IDE chipset support/bugfixes
+#
+# CONFIG_BLK_DEV_PLATFORM is not set
+CONFIG_BLK_DEV_IDEDMA_SFF=y
+CONFIG_BLK_DEV_PALMCHIP_BK3710=m
+CONFIG_BLK_DEV_IDEDMA=y
+
+#
+# SCSI device support
+#
+# CONFIG_RAID_ATTRS is not set
+CONFIG_SCSI=m
+CONFIG_SCSI_DMA=y
+# CONFIG_SCSI_TGT is not set
+# CONFIG_SCSI_NETLINK is not set
+CONFIG_SCSI_PROC_FS=y
+
+#
+# SCSI support type (disk, tape, CD-ROM)
+#
+CONFIG_BLK_DEV_SD=m
+# CONFIG_CHR_DEV_ST is not set
+# CONFIG_CHR_DEV_OSST is not set
+# CONFIG_BLK_DEV_SR is not set
+# CONFIG_CHR_DEV_SG is not set
+# CONFIG_CHR_DEV_SCH is not set
+
+#
+# Some SCSI devices (e.g. CD jukebox) support multiple LUNs
+#
+# CONFIG_SCSI_MULTI_LUN is not set
+# CONFIG_SCSI_CONSTANTS is not set
+# CONFIG_SCSI_LOGGING is not set
+# CONFIG_SCSI_SCAN_ASYNC is not set
+CONFIG_SCSI_WAIT_SCAN=m
+
+#
+# SCSI Transports
+#
+# CONFIG_SCSI_SPI_ATTRS is not set
+# CONFIG_SCSI_FC_ATTRS is not set
+# CONFIG_SCSI_ISCSI_ATTRS is not set
+# CONFIG_SCSI_SAS_LIBSAS is not set
+# CONFIG_SCSI_SRP_ATTRS is not set
+CONFIG_SCSI_LOWLEVEL=y
+# CONFIG_ISCSI_TCP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_SCSI_DEBUG is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
+# CONFIG_ATA is not set
+# CONFIG_MD is not set
+CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
+# CONFIG_DUMMY is not set
+# CONFIG_BONDING is not set
+# CONFIG_MACVLAN is not set
+# CONFIG_EQUALIZER is not set
+CONFIG_TUN=m
+# CONFIG_VETH is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+# CONFIG_MARVELL_PHY is not set
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+CONFIG_LXT_PHY=y
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+CONFIG_LSI_ET1011C_PHY=y
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
+CONFIG_NET_ETHERNET=y
+CONFIG_MII=y
+# CONFIG_AX88796 is not set
+# CONFIG_SMC91X is not set
+# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
+# CONFIG_IBM_NEW_EMAC_ZMII is not set
+# CONFIG_IBM_NEW_EMAC_RGMII is not set
+# CONFIG_IBM_NEW_EMAC_TAH is not set
+# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
+# CONFIG_B44 is not set
+# CONFIG_NETDEV_1000 is not set
+# CONFIG_NETDEV_10000 is not set
+
+#
+# Wireless LAN
+#
+# CONFIG_WLAN_PRE80211 is not set
+# CONFIG_WLAN_80211 is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
+
+#
+# USB Network Adapters
+#
+# CONFIG_USB_CATC is not set
+# CONFIG_USB_KAWETH is not set
+# CONFIG_USB_PEGASUS is not set
+# CONFIG_USB_RTL8150 is not set
+# CONFIG_USB_USBNET is not set
+# CONFIG_WAN is not set
+CONFIG_PPP=m
+# CONFIG_PPP_MULTILINK is not set
+# CONFIG_PPP_FILTER is not set
+CONFIG_PPP_ASYNC=m
+CONFIG_PPP_SYNC_TTY=m
+CONFIG_PPP_DEFLATE=m
+# CONFIG_PPP_BSDCOMP is not set
+# CONFIG_PPP_MPPE is not set
+# CONFIG_PPPOE is not set
+# CONFIG_PPPOL2TP is not set
+# CONFIG_SLIP is not set
+CONFIG_SLHC=m
+CONFIG_NETCONSOLE=y
+# CONFIG_NETCONSOLE_DYNAMIC is not set
+CONFIG_NETPOLL=y
+CONFIG_NETPOLL_TRAP=y
+CONFIG_NET_POLL_CONTROLLER=y
+# CONFIG_ISDN is not set
+
+#
+# Input device support
+#
+CONFIG_INPUT=y
+# CONFIG_INPUT_FF_MEMLESS is not set
+# CONFIG_INPUT_POLLDEV is not set
+
+#
+# Userland interfaces
+#
+CONFIG_INPUT_MOUSEDEV=m
+CONFIG_INPUT_MOUSEDEV_PSAUX=y
+CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024
+CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768
+# CONFIG_INPUT_JOYDEV is not set
+CONFIG_INPUT_EVDEV=m
+CONFIG_INPUT_EVBUG=m
+
+#
+# Input Device Drivers
+#
+CONFIG_INPUT_KEYBOARD=y
+CONFIG_KEYBOARD_ATKBD=m
+# CONFIG_KEYBOARD_SUNKBD is not set
+# CONFIG_KEYBOARD_LKKBD is not set
+CONFIG_KEYBOARD_XTKBD=m
+# CONFIG_KEYBOARD_NEWTON is not set
+# CONFIG_KEYBOARD_STOWAWAY is not set
+CONFIG_KEYBOARD_GPIO=y
+# CONFIG_INPUT_MOUSE is not set
+# CONFIG_INPUT_JOYSTICK is not set
+# CONFIG_INPUT_TABLET is not set
+CONFIG_INPUT_TOUCHSCREEN=y
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
+# CONFIG_TOUCHSCREEN_FUJITSU is not set
+# CONFIG_TOUCHSCREEN_GUNZE is not set
+# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
+# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
+# CONFIG_TOUCHSCREEN_MK712 is not set
+# CONFIG_TOUCHSCREEN_PENMOUNT is not set
+# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
+# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
+# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
+# CONFIG_INPUT_MISC is not set
+
+#
+# Hardware I/O ports
+#
+CONFIG_SERIO=y
+CONFIG_SERIO_SERPORT=y
+CONFIG_SERIO_LIBPS2=y
+# CONFIG_SERIO_RAW is not set
+# CONFIG_GAMEPORT is not set
+
+#
+# Character devices
+#
+CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
+# CONFIG_VT_CONSOLE is not set
+CONFIG_HW_CONSOLE=y
+# CONFIG_VT_HW_CONSOLE_BINDING is not set
+CONFIG_DEVKMEM=y
+# CONFIG_SERIAL_NONSTANDARD is not set
+
+#
+# Serial drivers
+#
+CONFIG_SERIAL_8250=y
+CONFIG_SERIAL_8250_CONSOLE=y
+CONFIG_SERIAL_8250_NR_UARTS=3
+CONFIG_SERIAL_8250_RUNTIME_UARTS=3
+# CONFIG_SERIAL_8250_EXTENDED is not set
+
+#
+# Non-8250 serial port support
+#
+CONFIG_SERIAL_CORE=y
+CONFIG_SERIAL_CORE_CONSOLE=y
+CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
+CONFIG_LEGACY_PTYS=y
+CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_IPMI_HANDLER is not set
+CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
+# CONFIG_R3964 is not set
+# CONFIG_RAW_DRIVER is not set
+# CONFIG_TCG_TPM is not set
+CONFIG_I2C=y
+CONFIG_I2C_BOARDINFO=y
+CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
+
+#
+# I2C Hardware Bus support
+#
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_DAVINCI=y
+# CONFIG_I2C_GPIO is not set
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
+# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
+
+#
+# Miscellaneous I2C Chip support
+#
+# CONFIG_DS1682 is not set
+# CONFIG_SENSORS_PCA9539 is not set
+# CONFIG_SENSORS_MAX6875 is not set
+# CONFIG_SENSORS_TSL2550 is not set
+# CONFIG_I2C_DEBUG_CORE is not set
+# CONFIG_I2C_DEBUG_ALGO is not set
+# CONFIG_I2C_DEBUG_BUS is not set
+# CONFIG_I2C_DEBUG_CHIP is not set
+# CONFIG_SPI is not set
+CONFIG_ARCH_REQUIRE_GPIOLIB=y
+CONFIG_GPIOLIB=y
+# CONFIG_DEBUG_GPIO is not set
+# CONFIG_GPIO_SYSFS is not set
+
+#
+# Memory mapped GPIO expanders:
+#
+
+#
+# I2C GPIO expanders:
+#
+# CONFIG_GPIO_MAX732X is not set
+# CONFIG_GPIO_PCA953X is not set
+CONFIG_GPIO_PCF857X=m
+
+#
+# PCI GPIO expanders:
+#
+
+#
+# SPI GPIO expanders:
+#
+# CONFIG_W1 is not set
+# CONFIG_POWER_SUPPLY is not set
+CONFIG_HWMON=y
+# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
+# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADM1021 is not set
+# CONFIG_SENSORS_ADM1025 is not set
+# CONFIG_SENSORS_ADM1026 is not set
+# CONFIG_SENSORS_ADM1029 is not set
+# CONFIG_SENSORS_ADM1031 is not set
+# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
+# CONFIG_SENSORS_ADT7470 is not set
+# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
+# CONFIG_SENSORS_ATXP1 is not set
+# CONFIG_SENSORS_DS1621 is not set
+# CONFIG_SENSORS_F71805F is not set
+# CONFIG_SENSORS_F71882FG is not set
+# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
+# CONFIG_SENSORS_GL518SM is not set
+# CONFIG_SENSORS_GL520SM is not set
+# CONFIG_SENSORS_IT87 is not set
+# CONFIG_SENSORS_LM63 is not set
+# CONFIG_SENSORS_LM75 is not set
+# CONFIG_SENSORS_LM77 is not set
+# CONFIG_SENSORS_LM78 is not set
+# CONFIG_SENSORS_LM80 is not set
+# CONFIG_SENSORS_LM83 is not set
+# CONFIG_SENSORS_LM85 is not set
+# CONFIG_SENSORS_LM87 is not set
+# CONFIG_SENSORS_LM90 is not set
+# CONFIG_SENSORS_LM92 is not set
+# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1619 is not set
+# CONFIG_SENSORS_MAX6650 is not set
+# CONFIG_SENSORS_PC87360 is not set
+# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
+# CONFIG_SENSORS_DME1737 is not set
+# CONFIG_SENSORS_SMSC47M1 is not set
+# CONFIG_SENSORS_SMSC47M192 is not set
+# CONFIG_SENSORS_SMSC47B397 is not set
+# CONFIG_SENSORS_ADS7828 is not set
+# CONFIG_SENSORS_THMC50 is not set
+# CONFIG_SENSORS_VT1211 is not set
+# CONFIG_SENSORS_W83781D is not set
+# CONFIG_SENSORS_W83791D is not set
+# CONFIG_SENSORS_W83792D is not set
+# CONFIG_SENSORS_W83793 is not set
+# CONFIG_SENSORS_W83L785TS is not set
+# CONFIG_SENSORS_W83L786NG is not set
+# CONFIG_SENSORS_W83627HF is not set
+# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
+CONFIG_WATCHDOG=y
+# CONFIG_WATCHDOG_NOWAYOUT is not set
+
+#
+# Watchdog Device Drivers
+#
+# CONFIG_SOFT_WATCHDOG is not set
+CONFIG_DAVINCI_WATCHDOG=m
+
+#
+# USB-based Watchdog Cards
+#
+# CONFIG_USBPCWATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
+
+#
+# Sonics Silicon Backplane
+#
+# CONFIG_SSB is not set
+
+#
+# Multifunction device drivers
+#
+# CONFIG_MFD_CORE is not set
+# CONFIG_MFD_SM501 is not set
+# CONFIG_MFD_ASIC3 is not set
+# CONFIG_HTC_EGPIO is not set
+# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TPS65010 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_MFD_T7L66XB is not set
+# CONFIG_MFD_TC6387XB is not set
+# CONFIG_MFD_TC6393XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+
+#
+# Multimedia devices
+#
+
+#
+# Multimedia core support
+#
+CONFIG_VIDEO_DEV=y
+CONFIG_VIDEO_V4L2_COMMON=y
+CONFIG_VIDEO_ALLOW_V4L1=y
+CONFIG_VIDEO_V4L1_COMPAT=y
+# CONFIG_DVB_CORE is not set
+CONFIG_VIDEO_MEDIA=y
+
+#
+# Multimedia drivers
+#
+# CONFIG_MEDIA_ATTACH is not set
+CONFIG_MEDIA_TUNER=y
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
+CONFIG_MEDIA_TUNER_SIMPLE=y
+CONFIG_MEDIA_TUNER_TDA8290=y
+CONFIG_MEDIA_TUNER_TDA9887=y
+CONFIG_MEDIA_TUNER_TEA5761=y
+CONFIG_MEDIA_TUNER_TEA5767=y
+CONFIG_MEDIA_TUNER_MT20XX=y
+CONFIG_MEDIA_TUNER_XC2028=y
+CONFIG_MEDIA_TUNER_XC5000=y
+CONFIG_MEDIA_TUNER_MC44S803=y
+CONFIG_VIDEO_V4L2=y
+CONFIG_VIDEO_V4L1=y
+CONFIG_VIDEO_CAPTURE_DRIVERS=y
+# CONFIG_VIDEO_ADV_DEBUG is not set
+# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set
+CONFIG_VIDEO_HELPER_CHIPS_AUTO=y
+# CONFIG_VIDEO_VIVI is not set
+# CONFIG_VIDEO_CPIA is not set
+# CONFIG_VIDEO_CPIA2 is not set
+# CONFIG_VIDEO_SAA5246A is not set
+# CONFIG_VIDEO_SAA5249 is not set
+# CONFIG_SOC_CAMERA is not set
+# CONFIG_V4L_USB_DRIVERS is not set
+# CONFIG_RADIO_ADAPTERS is not set
+CONFIG_DAB=y
+# CONFIG_USB_DABUSB is not set
+
+#
+# Graphics support
+#
+# CONFIG_VGASTATE is not set
+CONFIG_VIDEO_OUTPUT_CONTROL=m
+CONFIG_FB=y
+CONFIG_FIRMWARE_EDID=y
+# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
+# CONFIG_FB_CFB_FILLRECT is not set
+# CONFIG_FB_CFB_COPYAREA is not set
+# CONFIG_FB_CFB_IMAGEBLIT is not set
+# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set
+# CONFIG_FB_SYS_FILLRECT is not set
+# CONFIG_FB_SYS_COPYAREA is not set
+# CONFIG_FB_SYS_IMAGEBLIT is not set
+# CONFIG_FB_FOREIGN_ENDIAN is not set
+# CONFIG_FB_SYS_FOPS is not set
+# CONFIG_FB_SVGALIB is not set
+# CONFIG_FB_MACMODES is not set
+# CONFIG_FB_BACKLIGHT is not set
+# CONFIG_FB_MODE_HELPERS is not set
+# CONFIG_FB_TILEBLITTING is not set
+
+#
+# Frame buffer hardware drivers
+#
+# CONFIG_FB_S1D13XXX is not set
+# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
+# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
+
+#
+# Display device support
+#
+# CONFIG_DISPLAY_SUPPORT is not set
+
+#
+# Console display driver support
+#
+# CONFIG_VGA_CONSOLE is not set
+CONFIG_DUMMY_CONSOLE=y
+CONFIG_FRAMEBUFFER_CONSOLE=y
+# CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY is not set
+# CONFIG_FRAMEBUFFER_CONSOLE_ROTATION is not set
+# CONFIG_FONTS is not set
+CONFIG_FONT_8x8=y
+CONFIG_FONT_8x16=y
+CONFIG_LOGO=y
+CONFIG_LOGO_LINUX_MONO=y
+CONFIG_LOGO_LINUX_VGA16=y
+CONFIG_LOGO_LINUX_CLUT224=y
+CONFIG_SOUND=m
+# CONFIG_SOUND_OSS_CORE is not set
+CONFIG_SND=m
+CONFIG_SND_TIMER=m
+CONFIG_SND_PCM=m
+CONFIG_SND_JACK=y
+# CONFIG_SND_SEQUENCER is not set
+# CONFIG_SND_MIXER_OSS is not set
+# CONFIG_SND_PCM_OSS is not set
+# CONFIG_SND_HRTIMER is not set
+# CONFIG_SND_DYNAMIC_MINORS is not set
+CONFIG_SND_SUPPORT_OLD_API=y
+CONFIG_SND_VERBOSE_PROCFS=y
+# CONFIG_SND_VERBOSE_PRINTK is not set
+# CONFIG_SND_DEBUG is not set
+CONFIG_SND_DRIVERS=y
+# CONFIG_SND_DUMMY is not set
+# CONFIG_SND_MTPAV is not set
+# CONFIG_SND_SERIAL_U16550 is not set
+# CONFIG_SND_MPU401 is not set
+CONFIG_SND_ARM=y
+CONFIG_SND_USB=y
+# CONFIG_SND_USB_AUDIO is not set
+# CONFIG_SND_USB_CAIAQ is not set
+CONFIG_SND_SOC=m
+# CONFIG_SND_DAVINCI_SOC is not set
+CONFIG_SND_SOC_I2C_AND_SPI=m
+# CONFIG_SND_SOC_ALL_CODECS is not set
+# CONFIG_SOUND_PRIME is not set
+CONFIG_HID_SUPPORT=y
+CONFIG_HID=m
+# CONFIG_HID_DEBUG is not set
+# CONFIG_HIDRAW is not set
+
+#
+# USB Input Devices
+#
+CONFIG_USB_HID=m
+# CONFIG_HID_PID is not set
+# CONFIG_USB_HIDDEV is not set
+
+#
+# USB HID Boot Protocol drivers
+#
+# CONFIG_USB_KBD is not set
+# CONFIG_USB_MOUSE is not set
+
+#
+# Special HID drivers
+#
+CONFIG_HID_A4TECH=m
+CONFIG_HID_APPLE=m
+CONFIG_HID_BELKIN=m
+CONFIG_HID_CHERRY=m
+CONFIG_HID_CHICONY=m
+CONFIG_HID_CYPRESS=m
+# CONFIG_DRAGONRISE_FF is not set
+CONFIG_HID_EZKEY=m
+# CONFIG_HID_KYE is not set
+CONFIG_HID_GYRATION=m
+# CONFIG_HID_KENSINGTON is not set
+CONFIG_HID_LOGITECH=m
+# CONFIG_LOGITECH_FF is not set
+# CONFIG_LOGIRUMBLEPAD2_FF is not set
+CONFIG_HID_MICROSOFT=m
+CONFIG_HID_MONTEREY=m
+# CONFIG_HID_NTRIG is not set
+CONFIG_HID_PANTHERLORD=m
+# CONFIG_PANTHERLORD_FF is not set
+CONFIG_HID_PETALYNX=m
+CONFIG_HID_SAMSUNG=m
+CONFIG_HID_SONY=m
+CONFIG_HID_SUNPLUS=m
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
+CONFIG_USB_SUPPORT=y
+CONFIG_USB_ARCH_HAS_HCD=y
+# CONFIG_USB_ARCH_HAS_OHCI is not set
+# CONFIG_USB_ARCH_HAS_EHCI is not set
+CONFIG_USB=m
+# CONFIG_USB_DEBUG is not set
+# CONFIG_USB_ANNOUNCE_NEW_DEVICES is not set
+
+#
+# Miscellaneous USB options
+#
+CONFIG_USB_DEVICEFS=y
+CONFIG_USB_DEVICE_CLASS=y
+# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_OTG is not set
+# CONFIG_USB_OTG_WHITELIST is not set
+# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=m
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
+
+#
+# USB Host Controller Drivers
+#
+# CONFIG_USB_C67X00_HCD is not set
+# CONFIG_USB_OXU210HP_HCD is not set
+# CONFIG_USB_ISP116X_HCD is not set
+# CONFIG_USB_ISP1760_HCD is not set
+# CONFIG_USB_SL811_HCD is not set
+# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
+CONFIG_USB_MUSB_HDRC=m
+CONFIG_USB_MUSB_SOC=y
+
+#
+# DaVinci 35x and 644x USB support
+#
+# CONFIG_USB_MUSB_HOST is not set
+CONFIG_USB_MUSB_PERIPHERAL=y
+# CONFIG_USB_MUSB_OTG is not set
+CONFIG_USB_GADGET_MUSB_HDRC=y
+CONFIG_MUSB_PIO_ONLY=y
+# CONFIG_USB_MUSB_DEBUG is not set
+
+#
+# USB Device Class drivers
+#
+# CONFIG_USB_ACM is not set
+# CONFIG_USB_PRINTER is not set
+# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
+
+#
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
+#
+
+#
+# also be needed; see USB_STORAGE Help for more info
+#
+CONFIG_USB_STORAGE=m
+# CONFIG_USB_STORAGE_DEBUG is not set
+# CONFIG_USB_STORAGE_DATAFAB is not set
+# CONFIG_USB_STORAGE_FREECOM is not set
+# CONFIG_USB_STORAGE_ISD200 is not set
+# CONFIG_USB_STORAGE_USBAT is not set
+# CONFIG_USB_STORAGE_SDDR09 is not set
+# CONFIG_USB_STORAGE_SDDR55 is not set
+# CONFIG_USB_STORAGE_JUMPSHOT is not set
+# CONFIG_USB_STORAGE_ALAUDA is not set
+# CONFIG_USB_STORAGE_ONETOUCH is not set
+# CONFIG_USB_STORAGE_KARMA is not set
+# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
+# CONFIG_USB_LIBUSUAL is not set
+
+#
+# USB Imaging devices
+#
+# CONFIG_USB_MDC800 is not set
+# CONFIG_USB_MICROTEK is not set
+
+#
+# USB port drivers
+#
+# CONFIG_USB_SERIAL is not set
+
+#
+# USB Miscellaneous drivers
+#
+# CONFIG_USB_EMI62 is not set
+# CONFIG_USB_EMI26 is not set
+# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
+# CONFIG_USB_RIO500 is not set
+# CONFIG_USB_LEGOTOWER is not set
+# CONFIG_USB_LCD is not set
+# CONFIG_USB_BERRY_CHARGE is not set
+# CONFIG_USB_LED is not set
+# CONFIG_USB_CYPRESS_CY7C63 is not set
+# CONFIG_USB_CYTHERM is not set
+# CONFIG_USB_IDMOUSE is not set
+# CONFIG_USB_FTDI_ELAN is not set
+# CONFIG_USB_APPLEDISPLAY is not set
+# CONFIG_USB_LD is not set
+# CONFIG_USB_TRANCEVIBRATOR is not set
+# CONFIG_USB_IOWARRIOR is not set
+CONFIG_USB_TEST=m
+# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
+CONFIG_USB_GADGET=m
+# CONFIG_USB_GADGET_DEBUG is not set
+CONFIG_USB_GADGET_DEBUG_FILES=y
+CONFIG_USB_GADGET_DEBUG_FS=y
+CONFIG_USB_GADGET_VBUS_DRAW=2
+CONFIG_USB_GADGET_SELECTED=y
+# CONFIG_USB_GADGET_AT91 is not set
+# CONFIG_USB_GADGET_ATMEL_USBA is not set
+# CONFIG_USB_GADGET_FSL_USB2 is not set
+# CONFIG_USB_GADGET_LH7A40X is not set
+# CONFIG_USB_GADGET_OMAP is not set
+# CONFIG_USB_GADGET_PXA25X is not set
+# CONFIG_USB_GADGET_PXA27X is not set
+# CONFIG_USB_GADGET_S3C2410 is not set
+# CONFIG_USB_GADGET_IMX is not set
+# CONFIG_USB_GADGET_M66592 is not set
+# CONFIG_USB_GADGET_AMD5536UDC is not set
+# CONFIG_USB_GADGET_FSL_QE is not set
+# CONFIG_USB_GADGET_CI13XXX is not set
+# CONFIG_USB_GADGET_NET2280 is not set
+# CONFIG_USB_GADGET_GOKU is not set
+# CONFIG_USB_GADGET_DUMMY_HCD is not set
+CONFIG_USB_GADGET_DUALSPEED=y
+CONFIG_USB_ZERO=m
+CONFIG_USB_ETH=m
+CONFIG_USB_ETH_RNDIS=y
+CONFIG_USB_GADGETFS=m
+CONFIG_USB_FILE_STORAGE=m
+# CONFIG_USB_FILE_STORAGE_TEST is not set
+CONFIG_USB_G_SERIAL=m
+# CONFIG_USB_MIDI_GADGET is not set
+CONFIG_USB_G_PRINTER=m
+CONFIG_USB_CDC_COMPOSITE=m
+
+#
+# OTG and related infrastructure
+#
+CONFIG_USB_OTG_UTILS=y
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+CONFIG_MMC=m
+# CONFIG_MMC_DEBUG is not set
+# CONFIG_MMC_UNSAFE_RESUME is not set
+
+#
+# MMC/SD/SDIO Card Drivers
+#
+CONFIG_MMC_BLOCK=m
+# CONFIG_MMC_BLOCK_BOUNCE is not set
+# CONFIG_SDIO_UART is not set
+# CONFIG_MMC_TEST is not set
+
+#
+# MMC/SD/SDIO Host Controller Drivers
+#
+# CONFIG_MMC_SDHCI is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
+CONFIG_NEW_LEDS=y
+CONFIG_LEDS_CLASS=m
+
+#
+# LED drivers
+#
+# CONFIG_LEDS_PCA9532 is not set
+CONFIG_LEDS_GPIO=m
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
+
+#
+# LED Triggers
+#
+CONFIG_LEDS_TRIGGERS=y
+CONFIG_LEDS_TRIGGER_TIMER=m
+# CONFIG_LEDS_TRIGGER_IDE_DISK is not set
+CONFIG_LEDS_TRIGGER_HEARTBEAT=m
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
+# CONFIG_LEDS_TRIGGER_GPIO is not set
+# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
+CONFIG_RTC_LIB=y
+CONFIG_RTC_CLASS=m
+
+#
+# RTC interfaces
+#
+CONFIG_RTC_INTF_SYSFS=y
+CONFIG_RTC_INTF_PROC=y
+CONFIG_RTC_INTF_DEV=y
+# CONFIG_RTC_INTF_DEV_UIE_EMUL is not set
+# CONFIG_RTC_DRV_TEST is not set
+
+#
+# I2C RTC drivers
+#
+# CONFIG_RTC_DRV_DS1307 is not set
+# CONFIG_RTC_DRV_DS1374 is not set
+# CONFIG_RTC_DRV_DS1672 is not set
+# CONFIG_RTC_DRV_MAX6900 is not set
+# CONFIG_RTC_DRV_RS5C372 is not set
+# CONFIG_RTC_DRV_ISL1208 is not set
+# CONFIG_RTC_DRV_X1205 is not set
+# CONFIG_RTC_DRV_PCF8563 is not set
+# CONFIG_RTC_DRV_PCF8583 is not set
+# CONFIG_RTC_DRV_M41T80 is not set
+# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
+
+#
+# SPI RTC drivers
+#
+
+#
+# Platform RTC drivers
+#
+# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
+# CONFIG_RTC_DRV_DS1511 is not set
+# CONFIG_RTC_DRV_DS1553 is not set
+# CONFIG_RTC_DRV_DS1742 is not set
+# CONFIG_RTC_DRV_STK17TA8 is not set
+# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
+# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
+# CONFIG_RTC_DRV_V3020 is not set
+
+#
+# on-CPU RTC drivers
+#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
+# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
+
+#
+# File systems
+#
+CONFIG_EXT2_FS=y
+# CONFIG_EXT2_FS_XATTR is not set
+# CONFIG_EXT2_FS_XIP is not set
+CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
+CONFIG_EXT3_FS_XATTR=y
+# CONFIG_EXT3_FS_POSIX_ACL is not set
+# CONFIG_EXT3_FS_SECURITY is not set
+# CONFIG_EXT4_FS is not set
+CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_FS_MBCACHE=y
+# CONFIG_REISERFS_FS is not set
+# CONFIG_JFS_FS is not set
+# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
+CONFIG_XFS_FS=m
+# CONFIG_XFS_QUOTA is not set
+# CONFIG_XFS_POSIX_ACL is not set
+# CONFIG_XFS_RT is not set
+# CONFIG_XFS_DEBUG is not set
+# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
+CONFIG_DNOTIFY=y
+CONFIG_INOTIFY=y
+CONFIG_INOTIFY_USER=y
+# CONFIG_QUOTA is not set
+# CONFIG_AUTOFS_FS is not set
+CONFIG_AUTOFS4_FS=m
+# CONFIG_FUSE_FS is not set
+
+#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
+# CD-ROM/DVD Filesystems
+#
+# CONFIG_ISO9660_FS is not set
+# CONFIG_UDF_FS is not set
+
+#
+# DOS/FAT/NT Filesystems
+#
+CONFIG_FAT_FS=y
+CONFIG_MSDOS_FS=y
+CONFIG_VFAT_FS=y
+CONFIG_FAT_DEFAULT_CODEPAGE=437
+CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
+# CONFIG_NTFS_FS is not set
+
+#
+# Pseudo filesystems
+#
+CONFIG_PROC_FS=y
+CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_SYSFS=y
+CONFIG_TMPFS=y
+# CONFIG_TMPFS_POSIX_ACL is not set
+# CONFIG_HUGETLB_PAGE is not set
+# CONFIG_CONFIGFS_FS is not set
+CONFIG_MISC_FILESYSTEMS=y
+# CONFIG_ADFS_FS is not set
+# CONFIG_AFFS_FS is not set
+# CONFIG_HFS_FS is not set
+# CONFIG_HFSPLUS_FS is not set
+# CONFIG_BEFS_FS is not set
+# CONFIG_BFS_FS is not set
+# CONFIG_EFS_FS is not set
+CONFIG_JFFS2_FS=m
+CONFIG_JFFS2_FS_DEBUG=0
+CONFIG_JFFS2_FS_WRITEBUFFER=y
+# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
+# CONFIG_JFFS2_SUMMARY is not set
+# CONFIG_JFFS2_FS_XATTR is not set
+# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
+CONFIG_JFFS2_ZLIB=y
+# CONFIG_JFFS2_LZO is not set
+CONFIG_JFFS2_RTIME=y
+# CONFIG_JFFS2_RUBIN is not set
+CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
+# CONFIG_VXFS_FS is not set
+CONFIG_MINIX_FS=m
+# CONFIG_OMFS_FS is not set
+# CONFIG_HPFS_FS is not set
+# CONFIG_QNX4FS_FS is not set
+# CONFIG_ROMFS_FS is not set
+# CONFIG_SYSV_FS is not set
+# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
+CONFIG_NETWORK_FILESYSTEMS=y
+CONFIG_NFS_FS=y
+CONFIG_NFS_V3=y
+# CONFIG_NFS_V3_ACL is not set
+# CONFIG_NFS_V4 is not set
+CONFIG_ROOT_NFS=y
+CONFIG_NFSD=m
+CONFIG_NFSD_V3=y
+# CONFIG_NFSD_V3_ACL is not set
+# CONFIG_NFSD_V4 is not set
+CONFIG_LOCKD=y
+CONFIG_LOCKD_V4=y
+CONFIG_EXPORTFS=m
+CONFIG_NFS_COMMON=y
+CONFIG_SUNRPC=y
+# CONFIG_RPCSEC_GSS_KRB5 is not set
+# CONFIG_RPCSEC_GSS_SPKM3 is not set
+CONFIG_SMB_FS=m
+# CONFIG_SMB_NLS_DEFAULT is not set
+# CONFIG_CIFS is not set
+# CONFIG_NCP_FS is not set
+# CONFIG_CODA_FS is not set
+# CONFIG_AFS_FS is not set
+
+#
+# Partition Types
+#
+CONFIG_PARTITION_ADVANCED=y
+# CONFIG_ACORN_PARTITION is not set
+# CONFIG_OSF_PARTITION is not set
+# CONFIG_AMIGA_PARTITION is not set
+# CONFIG_ATARI_PARTITION is not set
+# CONFIG_MAC_PARTITION is not set
+CONFIG_MSDOS_PARTITION=y
+# CONFIG_BSD_DISKLABEL is not set
+# CONFIG_MINIX_SUBPARTITION is not set
+# CONFIG_SOLARIS_X86_PARTITION is not set
+# CONFIG_UNIXWARE_DISKLABEL is not set
+# CONFIG_LDM_PARTITION is not set
+# CONFIG_SGI_PARTITION is not set
+# CONFIG_ULTRIX_PARTITION is not set
+# CONFIG_SUN_PARTITION is not set
+# CONFIG_KARMA_PARTITION is not set
+# CONFIG_EFI_PARTITION is not set
+# CONFIG_SYSV68_PARTITION is not set
+CONFIG_NLS=y
+CONFIG_NLS_DEFAULT="iso8859-1"
+CONFIG_NLS_CODEPAGE_437=y
+# CONFIG_NLS_CODEPAGE_737 is not set
+# CONFIG_NLS_CODEPAGE_775 is not set
+# CONFIG_NLS_CODEPAGE_850 is not set
+# CONFIG_NLS_CODEPAGE_852 is not set
+# CONFIG_NLS_CODEPAGE_855 is not set
+# CONFIG_NLS_CODEPAGE_857 is not set
+# CONFIG_NLS_CODEPAGE_860 is not set
+# CONFIG_NLS_CODEPAGE_861 is not set
+# CONFIG_NLS_CODEPAGE_862 is not set
+# CONFIG_NLS_CODEPAGE_863 is not set
+# CONFIG_NLS_CODEPAGE_864 is not set
+# CONFIG_NLS_CODEPAGE_865 is not set
+# CONFIG_NLS_CODEPAGE_866 is not set
+# CONFIG_NLS_CODEPAGE_869 is not set
+# CONFIG_NLS_CODEPAGE_936 is not set
+# CONFIG_NLS_CODEPAGE_950 is not set
+# CONFIG_NLS_CODEPAGE_932 is not set
+# CONFIG_NLS_CODEPAGE_949 is not set
+# CONFIG_NLS_CODEPAGE_874 is not set
+# CONFIG_NLS_ISO8859_8 is not set
+# CONFIG_NLS_CODEPAGE_1250 is not set
+# CONFIG_NLS_CODEPAGE_1251 is not set
+CONFIG_NLS_ASCII=m
+CONFIG_NLS_ISO8859_1=y
+# CONFIG_NLS_ISO8859_2 is not set
+# CONFIG_NLS_ISO8859_3 is not set
+# CONFIG_NLS_ISO8859_4 is not set
+# CONFIG_NLS_ISO8859_5 is not set
+# CONFIG_NLS_ISO8859_6 is not set
+# CONFIG_NLS_ISO8859_7 is not set
+# CONFIG_NLS_ISO8859_9 is not set
+# CONFIG_NLS_ISO8859_13 is not set
+# CONFIG_NLS_ISO8859_14 is not set
+# CONFIG_NLS_ISO8859_15 is not set
+# CONFIG_NLS_KOI8_R is not set
+# CONFIG_NLS_KOI8_U is not set
+CONFIG_NLS_UTF8=m
+# CONFIG_DLM is not set
+
+#
+# Kernel hacking
+#
+# CONFIG_PRINTK_TIME is not set
+CONFIG_ENABLE_WARN_DEPRECATED=y
+CONFIG_ENABLE_MUST_CHECK=y
+CONFIG_FRAME_WARN=1024
+# CONFIG_MAGIC_SYSRQ is not set
+# CONFIG_UNUSED_SYMBOLS is not set
+CONFIG_DEBUG_FS=y
+# CONFIG_HEADERS_CHECK is not set
+CONFIG_DEBUG_KERNEL=y
+# CONFIG_DEBUG_SHIRQ is not set
+CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
+CONFIG_SCHED_DEBUG=y
+# CONFIG_SCHEDSTATS is not set
+CONFIG_TIMER_STATS=y
+# CONFIG_DEBUG_OBJECTS is not set
+# CONFIG_SLUB_DEBUG_ON is not set
+# CONFIG_SLUB_STATS is not set
+CONFIG_DEBUG_PREEMPT=y
+CONFIG_DEBUG_RT_MUTEXES=y
+CONFIG_DEBUG_PI_LIST=y
+# CONFIG_RT_MUTEX_TESTER is not set
+# CONFIG_DEBUG_SPINLOCK is not set
+CONFIG_DEBUG_MUTEXES=y
+# CONFIG_DEBUG_LOCK_ALLOC is not set
+# CONFIG_PROVE_LOCKING is not set
+# CONFIG_LOCK_STAT is not set
+# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
+# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+# CONFIG_DEBUG_KOBJECT is not set
+CONFIG_DEBUG_BUGVERBOSE=y
+# CONFIG_DEBUG_INFO is not set
+# CONFIG_DEBUG_VM is not set
+# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_DEBUG_LIST is not set
+# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
+# CONFIG_BOOT_PRINTK_DELAY is not set
+# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
+# CONFIG_FAULT_INJECTION is not set
+# CONFIG_LATENCYTOP is not set
+# CONFIG_SYSCTL_SYSCALL_CHECK is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
+# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
+CONFIG_DEBUG_USER=y
+CONFIG_DEBUG_ERRORS=y
+# CONFIG_DEBUG_STACK_USAGE is not set
+# CONFIG_DEBUG_LL is not set
+
+#
+# Security options
+#
+# CONFIG_KEYS is not set
+# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
+# CONFIG_SECURITY_FILE_CAPABILITIES is not set
+CONFIG_CRYPTO=y
+
+#
+# Crypto core or helper
+#
+# CONFIG_CRYPTO_FIPS is not set
+# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
+# CONFIG_CRYPTO_GF128MUL is not set
+# CONFIG_CRYPTO_NULL is not set
+# CONFIG_CRYPTO_CRYPTD is not set
+# CONFIG_CRYPTO_AUTHENC is not set
+# CONFIG_CRYPTO_TEST is not set
+
+#
+# Authenticated Encryption with Associated Data
+#
+# CONFIG_CRYPTO_CCM is not set
+# CONFIG_CRYPTO_GCM is not set
+# CONFIG_CRYPTO_SEQIV is not set
+
+#
+# Block modes
+#
+# CONFIG_CRYPTO_CBC is not set
+# CONFIG_CRYPTO_CTR is not set
+# CONFIG_CRYPTO_CTS is not set
+# CONFIG_CRYPTO_ECB is not set
+# CONFIG_CRYPTO_LRW is not set
+# CONFIG_CRYPTO_PCBC is not set
+# CONFIG_CRYPTO_XTS is not set
+
+#
+# Hash modes
+#
+# CONFIG_CRYPTO_HMAC is not set
+# CONFIG_CRYPTO_XCBC is not set
+
+#
+# Digest
+#
+# CONFIG_CRYPTO_CRC32C is not set
+# CONFIG_CRYPTO_MD4 is not set
+# CONFIG_CRYPTO_MD5 is not set
+# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
+# CONFIG_CRYPTO_SHA1 is not set
+# CONFIG_CRYPTO_SHA256 is not set
+# CONFIG_CRYPTO_SHA512 is not set
+# CONFIG_CRYPTO_TGR192 is not set
+# CONFIG_CRYPTO_WP512 is not set
+
+#
+# Ciphers
+#
+# CONFIG_CRYPTO_AES is not set
+# CONFIG_CRYPTO_ANUBIS is not set
+# CONFIG_CRYPTO_ARC4 is not set
+# CONFIG_CRYPTO_BLOWFISH is not set
+# CONFIG_CRYPTO_CAMELLIA is not set
+# CONFIG_CRYPTO_CAST5 is not set
+# CONFIG_CRYPTO_CAST6 is not set
+# CONFIG_CRYPTO_DES is not set
+# CONFIG_CRYPTO_FCRYPT is not set
+# CONFIG_CRYPTO_KHAZAD is not set
+# CONFIG_CRYPTO_SALSA20 is not set
+# CONFIG_CRYPTO_SEED is not set
+# CONFIG_CRYPTO_SERPENT is not set
+# CONFIG_CRYPTO_TEA is not set
+# CONFIG_CRYPTO_TWOFISH is not set
+
+#
+# Compression
+#
+# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
+# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
+# CONFIG_CRYPTO_HW is not set
+# CONFIG_BINARY_PRINTF is not set
+
+#
+# Library routines
+#
+CONFIG_BITREVERSE=y
+CONFIG_GENERIC_FIND_LAST_BIT=y
+CONFIG_CRC_CCITT=m
+# CONFIG_CRC16 is not set
+CONFIG_CRC_T10DIF=m
+# CONFIG_CRC_ITU_T is not set
+CONFIG_CRC32=y
+# CONFIG_CRC7 is not set
+# CONFIG_LIBCRC32C is not set
+CONFIG_ZLIB_INFLATE=y
+CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_HAS_IOMEM=y
+CONFIG_HAS_IOPORT=y
+CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig
index c367ae44012..dcf8153a947 100644
--- a/arch/arm/configs/kirkwood_defconfig
+++ b/arch/arm/configs/kirkwood_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc5
-# Tue Mar 3 21:45:57 2009
+# Linux kernel version: 2.6.30-rc4
+# Mon May 4 11:58:57 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -66,20 +66,20 @@ CONFIG_NAMESPACES=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -89,6 +89,7 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
@@ -101,6 +102,7 @@ CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -113,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -142,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="cfq"
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@@ -162,6 +164,7 @@ CONFIG_ARCH_KIRKWOOD=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
@@ -217,6 +220,7 @@ CONFIG_PCI_SYSCALL=y
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
@@ -237,6 +241,7 @@ CONFIG_AEABI=y
CONFIG_ARCH_FLATMEM_HAS_HOLES=y
# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
@@ -249,6 +254,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -293,7 +300,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -324,7 +330,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -357,6 +363,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -365,20 +372,20 @@ CONFIG_NET_DSA_MV88E6123_61_65=y
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=y
# CONFIG_CFG80211_REG_DEBUG is not set
-# CONFIG_NL80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
CONFIG_LIB80211=y
+# CONFIG_LIB80211_DEBUG is not set
CONFIG_MAC80211=y
#
@@ -513,7 +520,6 @@ CONFIG_MTD_NAND_ORION=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -592,8 +598,10 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
@@ -614,6 +622,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -687,6 +696,7 @@ CONFIG_SATA_MV=y
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -724,8 +734,10 @@ CONFIG_MII=y
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
# CONFIG_SMC911X is not set
# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -763,6 +775,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -777,6 +790,7 @@ CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -789,10 +803,11 @@ CONFIG_WLAN_80211=y
CONFIG_LIBERTAS=y
# CONFIG_LIBERTAS_USB is not set
CONFIG_LIBERTAS_SDIO=y
+# CONFIG_LIBERTAS_SPI is not set
# CONFIG_LIBERTAS_DEBUG is not set
# CONFIG_LIBERTAS_THINFIRM is not set
-# CONFIG_HERMES is not set
# CONFIG_ATMEL is not set
+# CONFIG_AT76C50X_USB is not set
# CONFIG_PRISM54 is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
@@ -800,20 +815,20 @@ CONFIG_LIBERTAS_SDIO=y
# CONFIG_RTL8187 is not set
# CONFIG_ADM8211 is not set
# CONFIG_MAC80211_HWSIM is not set
+# CONFIG_MWL8K is not set
# CONFIG_P54_COMMON is not set
# CONFIG_ATH5K is not set
# CONFIG_ATH9K is not set
+# CONFIG_AR9170_USB is not set
# CONFIG_IPW2100 is not set
# CONFIG_IPW2200 is not set
-# CONFIG_IWLCORE is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_IWLAGN is not set
-# CONFIG_IWL3945 is not set
+# CONFIG_IWLWIFI is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
# CONFIG_ZD1211RW is not set
# CONFIG_RT2X00 is not set
+# CONFIG_HERMES is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -908,6 +923,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
@@ -982,7 +998,6 @@ CONFIG_I2C_MV64XXX=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -1082,15 +1097,17 @@ CONFIG_USB_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1152,11 +1169,11 @@ CONFIG_USB_PRINTER=m
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1198,7 +1215,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1215,6 +1231,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
@@ -1245,7 +1262,11 @@ CONFIG_LEDS_CLASS=y
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_DAC124S085 is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
@@ -1255,6 +1276,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1329,7 +1354,9 @@ CONFIG_DMA_ENGINE=y
# DMA Clients
#
# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1341,6 +1368,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
@@ -1361,6 +1389,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
@@ -1419,6 +1452,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1430,7 +1464,6 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1502,6 +1535,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1538,10 +1574,12 @@ CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1551,11 +1589,15 @@ CONFIG_TRACING=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
@@ -1587,10 +1629,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1659,6 +1703,7 @@ CONFIG_CRYPTO_ARC4=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
@@ -1667,6 +1712,7 @@ CONFIG_CRYPTO_ARC4=y
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
@@ -1682,7 +1728,7 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig
index b0698722e0c..398274b0771 100644
--- a/arch/arm/configs/mv78xx0_defconfig
+++ b/arch/arm/configs/mv78xx0_defconfig
@@ -1,11 +1,11 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26-rc5
-# Fri Jun 13 02:57:32 2008
+# Linux kernel version: 2.6.30-rc4
+# Mon May 4 14:22:12 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-# CONFIG_GENERIC_GPIO is not set
+CONFIG_GENERIC_GPIO=y
CONFIG_GENERIC_TIME=y
CONFIG_GENERIC_CLOCKEVENTS=y
CONFIG_MMU=y
@@ -22,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
+CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -43,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -54,32 +62,35 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
@@ -87,10 +98,9 @@ CONFIG_KPROBES=y
CONFIG_KRETPROBES=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
+CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -98,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -117,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# System Type
@@ -127,11 +135,10 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_CO285 is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@@ -152,28 +159,23 @@ CONFIG_ARCH_MV78XX0=y
# CONFIG_ARCH_ORION5X is not set
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Marvell MV78xx0 Implementations
#
CONFIG_MACH_DB78X00_BP=y
CONFIG_MACH_RD78X00_MASA=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
CONFIG_PLAT_ORION=y
#
@@ -199,6 +201,7 @@ CONFIG_ARM_THUMB=y
# CONFIG_CPU_DCACHE_DISABLE is not set
CONFIG_OUTER_CACHE=y
CONFIG_CACHE_FEROCEON_L2=y
+# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set
#
# Bus support
@@ -208,6 +211,8 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
@@ -217,25 +222,33 @@ CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+CONFIG_HIGHMEM=y
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ALIGNMENT_TRAP=y
#
@@ -248,6 +261,11 @@ CONFIG_CMDLINE=""
# CONFIG_KEXEC is not set
#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
# Floating point emulation
#
@@ -263,6 +281,8 @@ CONFIG_VFP=y
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
@@ -271,10 +291,6 @@ CONFIG_BINFMT_ELF=y
#
# CONFIG_PM is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -310,7 +326,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -325,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -334,26 +351,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-CONFIG_WIRELESS_EXT=y
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIRELESS is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -368,6 +382,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
CONFIG_STANDALONE=y
CONFIG_PREVENT_FIRMWARE_BUILD=y
CONFIG_FW_LOADER=y
+# CONFIG_FIRMWARE_IN_KERNEL is not set
+CONFIG_EXTRA_FIRMWARE=""
# CONFIG_DEBUG_DRIVER is not set
# CONFIG_DEBUG_DEVRES is not set
# CONFIG_SYS_HYPERVISOR is not set
@@ -376,6 +392,7 @@ CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@@ -429,9 +446,7 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
@@ -456,6 +471,7 @@ CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
@@ -466,6 +482,11 @@ CONFIG_MTD_NAND_ORION=y
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -486,10 +507,20 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -547,7 +578,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
@@ -566,6 +601,8 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_NSP32 is not set
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -632,11 +669,15 @@ CONFIG_SATA_MV=y
#
# IEEE 1394 (FireWire) support
#
+
+#
+# Enable only one of the two stacks, unless you know what you are doing
+#
# CONFIG_FIREWIRE is not set
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -644,7 +685,26 @@ CONFIG_NETDEVICES=y
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
@@ -654,19 +714,25 @@ CONFIG_MII=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
@@ -676,18 +742,20 @@ CONFIG_NET_PCI=y
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -701,6 +769,9 @@ CONFIG_NETDEV_1000=y
CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -709,7 +780,10 @@ CONFIG_MV643XX_ETH=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
@@ -786,11 +860,11 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -799,44 +873,63 @@ CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+# CONFIG_I2C_GPIO is not set
+CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
-CONFIG_I2C_MV64XXX=y
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -848,6 +941,7 @@ CONFIG_I2C_MV64XXX=y
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
# CONFIG_HWMON_VID is not set
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
@@ -855,14 +949,17 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -877,10 +974,15 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -900,20 +1002,28 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
-# CONFIG_MFD_ASIC3 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
@@ -944,10 +1054,6 @@ CONFIG_SSB_POSSIBLE=y
# Display device support
#
# CONFIG_DISPLAY_SUPPORT is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
@@ -958,9 +1064,36 @@ CONFIG_HID=y
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -978,6 +1111,9 @@ CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
@@ -986,12 +1122,15 @@ CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
@@ -999,20 +1138,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
@@ -1028,7 +1167,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-# CONFIG_USB_MON is not set
#
# USB port drivers
@@ -1041,7 +1179,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1049,7 +1187,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1059,14 +1196,29 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
#
# LED drivers
#
+# CONFIG_LEDS_PCA9532 is not set
+# CONFIG_LEDS_GPIO is not set
+# CONFIG_LEDS_LP5521 is not set
+# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
@@ -1074,7 +1226,12 @@ CONFIG_LEDS_CLASS=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1105,6 +1262,8 @@ CONFIG_RTC_DRV_RS5C372=y
CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
# CONFIG_RTC_DRV_S35390A is not set
+# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
@@ -1114,18 +1273,25 @@ CONFIG_RTC_DRV_M41T80=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
+# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
+# CONFIG_REGULATOR is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -1134,14 +1300,25 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1151,6 +1328,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
@@ -1174,15 +1356,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1202,25 +1382,27 @@ CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1301,11 +1483,16 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
+# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
+CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
@@ -1320,22 +1507,55 @@ CONFIG_DEBUG_PREEMPT=y
# CONFIG_LOCK_STAT is not set
# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
+CONFIG_STACKTRACE=y
# CONFIG_DEBUG_KOBJECT is not set
+# CONFIG_DEBUG_HIGHMEM is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_VM is not set
# CONFIG_DEBUG_WRITECOUNT is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
-CONFIG_FRAME_POINTER=y
+# CONFIG_DEBUG_NOTIFIERS is not set
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_IRQSOFF_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1347,17 +1567,27 @@ CONFIG_DEBUG_LL=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1393,6 +1623,10 @@ CONFIG_CRYPTO_PCBC=m
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -1422,25 +1656,32 @@ CONFIG_CRYPTO_PCBC=m
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
+# CONFIG_CRC_T10DIF is not set
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/mx31moboard_defconfig b/arch/arm/configs/mx31moboard_defconfig
deleted file mode 100644
index e90f86d6dee..00000000000
--- a/arch/arm/configs/mx31moboard_defconfig
+++ /dev/null
@@ -1,790 +0,0 @@
-#
-# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc5
-# Fri Oct 24 11:41:22 2008
-#
-CONFIG_ARM=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_GENERIC_GPIO=y
-CONFIG_GENERIC_TIME=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_MMU=y
-# CONFIG_NO_IOPORT is not set
-CONFIG_GENERIC_HARDIRQS=y
-CONFIG_STACKTRACE_SUPPORT=y
-CONFIG_HAVE_LATENCYTOP_SUPPORT=y
-CONFIG_LOCKDEP_SUPPORT=y
-CONFIG_TRACE_IRQFLAGS_SUPPORT=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_GENERIC_IRQ_PROBE=y
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_GENERIC_HWEIGHT=y
-CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
-CONFIG_ARCH_MTD_XIP=y
-CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
-CONFIG_VECTORS_BASE=0xffff0000
-CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
-
-#
-# General setup
-#
-CONFIG_EXPERIMENTAL=y
-CONFIG_BROKEN_ON_SMP=y
-CONFIG_LOCK_KERNEL=y
-CONFIG_INIT_ENV_ARG_LIMIT=32
-CONFIG_LOCALVERSION=""
-CONFIG_LOCALVERSION_AUTO=y
-CONFIG_SWAP=y
-CONFIG_SYSVIPC=y
-CONFIG_SYSVIPC_SYSCTL=y
-# CONFIG_POSIX_MQUEUE is not set
-# CONFIG_BSD_PROCESS_ACCT is not set
-# CONFIG_TASKSTATS is not set
-# CONFIG_AUDIT is not set
-CONFIG_IKCONFIG=y
-CONFIG_IKCONFIG_PROC=y
-CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
-CONFIG_GROUP_SCHED=y
-CONFIG_FAIR_GROUP_SCHED=y
-# CONFIG_RT_GROUP_SCHED is not set
-CONFIG_USER_SCHED=y
-# CONFIG_CGROUP_SCHED is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
-# CONFIG_RELAY is not set
-# CONFIG_NAMESPACES is not set
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_CC_OPTIMIZE_FOR_SIZE=y
-CONFIG_SYSCTL=y
-CONFIG_EMBEDDED=y
-CONFIG_UID16=y
-CONFIG_SYSCTL_SYSCALL=y
-CONFIG_KALLSYMS=y
-# CONFIG_KALLSYMS_EXTRA_PASS is not set
-CONFIG_HOTPLUG=y
-CONFIG_PRINTK=y
-CONFIG_BUG=y
-CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
-CONFIG_BASE_FULL=y
-CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
-CONFIG_EPOLL=y
-CONFIG_SIGNALFD=y
-CONFIG_TIMERFD=y
-CONFIG_EVENTFD=y
-CONFIG_SHMEM=y
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_SLAB=y
-# CONFIG_SLUB is not set
-# CONFIG_SLOB is not set
-# CONFIG_PROFILING is not set
-# CONFIG_MARKERS is not set
-CONFIG_HAVE_OPROFILE=y
-# CONFIG_KPROBES is not set
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
-# CONFIG_HAVE_IOREMAP_PROT is not set
-CONFIG_HAVE_KPROBES=y
-CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_SLABINFO=y
-CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
-CONFIG_BASE_SMALL=0
-CONFIG_MODULES=y
-# CONFIG_MODULE_FORCE_LOAD is not set
-CONFIG_MODULE_UNLOAD=y
-CONFIG_MODULE_FORCE_UNLOAD=y
-CONFIG_MODVERSIONS=y
-# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
-CONFIG_BLOCK=y
-# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
-# CONFIG_BLK_DEV_BSG is not set
-# CONFIG_BLK_DEV_INTEGRITY is not set
-
-#
-# IO Schedulers
-#
-CONFIG_IOSCHED_NOOP=y
-CONFIG_IOSCHED_AS=y
-CONFIG_IOSCHED_DEADLINE=y
-CONFIG_IOSCHED_CFQ=y
-# CONFIG_DEFAULT_AS is not set
-# CONFIG_DEFAULT_DEADLINE is not set
-CONFIG_DEFAULT_CFQ=y
-# CONFIG_DEFAULT_NOOP is not set
-CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-
-#
-# System Type
-#
-# CONFIG_ARCH_AAEC2000 is not set
-# CONFIG_ARCH_INTEGRATOR is not set
-# CONFIG_ARCH_REALVIEW is not set
-# CONFIG_ARCH_VERSATILE is not set
-# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
-# CONFIG_ARCH_CLPS711X is not set
-# CONFIG_ARCH_EBSA110 is not set
-# CONFIG_ARCH_EP93XX is not set
-# CONFIG_ARCH_FOOTBRIDGE is not set
-# CONFIG_ARCH_NETX is not set
-# CONFIG_ARCH_H720X is not set
-# CONFIG_ARCH_IMX is not set
-# CONFIG_ARCH_IOP13XX is not set
-# CONFIG_ARCH_IOP32X is not set
-# CONFIG_ARCH_IOP33X is not set
-# CONFIG_ARCH_IXP23XX is not set
-# CONFIG_ARCH_IXP2000 is not set
-# CONFIG_ARCH_IXP4XX is not set
-# CONFIG_ARCH_L7200 is not set
-# CONFIG_ARCH_KIRKWOOD is not set
-# CONFIG_ARCH_KS8695 is not set
-# CONFIG_ARCH_NS9XXX is not set
-# CONFIG_ARCH_LOKI is not set
-# CONFIG_ARCH_MV78XX0 is not set
-CONFIG_ARCH_MXC=y
-# CONFIG_ARCH_ORION5X is not set
-# CONFIG_ARCH_PNX4008 is not set
-# CONFIG_ARCH_PXA is not set
-# CONFIG_ARCH_RPC is not set
-# CONFIG_ARCH_SA1100 is not set
-# CONFIG_ARCH_S3C2410 is not set
-# CONFIG_ARCH_SHARK is not set
-# CONFIG_ARCH_LH7A40X is not set
-# CONFIG_ARCH_DAVINCI is not set
-# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
-
-#
-# Freescale MXC Implementations
-#
-# CONFIG_ARCH_MX2 is not set
-CONFIG_ARCH_MX3=y
-
-#
-# MX3 Options
-#
-# CONFIG_MACH_MX31ADS is not set
-# CONFIG_MACH_PCM037 is not set
-# CONFIG_MACH_MX31LITE is not set
-CONFIG_MACH_MX31MOBOARD=y
-# CONFIG_MXC_IRQ_PRIOR is not set
-
-#
-# Processor Type
-#
-CONFIG_CPU_32=y
-CONFIG_CPU_V6=y
-# CONFIG_CPU_32v6K is not set
-CONFIG_CPU_32v6=y
-CONFIG_CPU_ABRT_EV6=y
-CONFIG_CPU_PABRT_NOIFAR=y
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_HAS_ASID=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-
-#
-# Processor Features
-#
-CONFIG_ARM_THUMB=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-# CONFIG_CPU_DCACHE_DISABLE is not set
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-# CONFIG_OUTER_CACHE is not set
-
-#
-# Bus support
-#
-# CONFIG_PCI_SYSCALL is not set
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-# CONFIG_PCCARD is not set
-
-#
-# Kernel Features
-#
-CONFIG_TICK_ONESHOT=y
-CONFIG_NO_HZ=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_PREEMPT=y
-CONFIG_HZ=100
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_ARCH_FLATMEM_HAS_HOLES=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
-CONFIG_SELECT_MEMORY_MODEL=y
-CONFIG_FLATMEM_MANUAL=y
-# CONFIG_DISCONTIGMEM_MANUAL is not set
-# CONFIG_SPARSEMEM_MANUAL is not set
-CONFIG_FLATMEM=y
-CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_PAGEFLAGS_EXTENDED=y
-CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
-CONFIG_VIRT_TO_BUS=y
-CONFIG_ALIGNMENT_TRAP=y
-
-#
-# Boot options
-#
-CONFIG_ZBOOT_ROM_TEXT=0x0
-CONFIG_ZBOOT_ROM_BSS=0x0
-CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off"
-# CONFIG_XIP_KERNEL is not set
-# CONFIG_KEXEC is not set
-
-#
-# Floating point emulation
-#
-
-#
-# At least one emulation must be selected
-#
-CONFIG_VFP=y
-
-#
-# Userspace binary formats
-#
-CONFIG_BINFMT_ELF=y
-# CONFIG_BINFMT_AOUT is not set
-# CONFIG_BINFMT_MISC is not set
-
-#
-# Power management options
-#
-# CONFIG_PM is not set
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_NET=y
-
-#
-# Networking options
-#
-CONFIG_PACKET=y
-# CONFIG_PACKET_MMAP is not set
-CONFIG_UNIX=y
-# CONFIG_NET_KEY is not set
-CONFIG_INET=y
-# CONFIG_IP_MULTICAST is not set
-# CONFIG_IP_ADVANCED_ROUTER is not set
-CONFIG_IP_FIB_HASH=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_BOOTP is not set
-# CONFIG_IP_PNP_RARP is not set
-# CONFIG_NET_IPIP is not set
-# CONFIG_NET_IPGRE is not set
-# CONFIG_ARPD is not set
-# CONFIG_SYN_COOKIES is not set
-# CONFIG_INET_AH is not set
-# CONFIG_INET_ESP is not set
-# CONFIG_INET_IPCOMP is not set
-# CONFIG_INET_XFRM_TUNNEL is not set
-# CONFIG_INET_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_TRANSPORT is not set
-# CONFIG_INET_XFRM_MODE_TUNNEL is not set
-# CONFIG_INET_XFRM_MODE_BEET is not set
-# CONFIG_INET_LRO is not set
-# CONFIG_INET_DIAG is not set
-# CONFIG_TCP_CONG_ADVANCED is not set
-CONFIG_TCP_CONG_CUBIC=y
-CONFIG_DEFAULT_TCP_CONG="cubic"
-# CONFIG_TCP_MD5SIG is not set
-# CONFIG_IPV6 is not set
-# CONFIG_NETWORK_SECMARK is not set
-# CONFIG_NETFILTER is not set
-# CONFIG_IP_DCCP is not set
-# CONFIG_IP_SCTP is not set
-# CONFIG_TIPC is not set
-# CONFIG_ATM is not set
-# CONFIG_BRIDGE is not set
-# CONFIG_VLAN_8021Q is not set
-# CONFIG_DECNET is not set
-# CONFIG_LLC2 is not set
-# CONFIG_IPX is not set
-# CONFIG_ATALK is not set
-# CONFIG_X25 is not set
-# CONFIG_LAPB is not set
-# CONFIG_ECONET is not set
-# CONFIG_WAN_ROUTER is not set
-# CONFIG_NET_SCHED is not set
-
-#
-# Network testing
-#
-# CONFIG_NET_PKTGEN is not set
-# CONFIG_HAMRADIO is not set
-# CONFIG_CAN is not set
-# CONFIG_IRDA is not set
-# CONFIG_BT is not set
-# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
-# CONFIG_CFG80211 is not set
-# CONFIG_WIRELESS_EXT is not set
-# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
-# CONFIG_RFKILL is not set
-# CONFIG_NET_9P is not set
-
-#
-# Device Drivers
-#
-
-#
-# Generic Driver Options
-#
-CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug"
-CONFIG_STANDALONE=y
-CONFIG_PREVENT_FIRMWARE_BUILD=y
-CONFIG_FW_LOADER=m
-CONFIG_FIRMWARE_IN_KERNEL=y
-CONFIG_EXTRA_FIRMWARE=""
-# CONFIG_SYS_HYPERVISOR is not set
-# CONFIG_CONNECTOR is not set
-CONFIG_MTD=y
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_CONCAT is not set
-CONFIG_MTD_PARTITIONS=y
-CONFIG_MTD_REDBOOT_PARTS=y
-CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1
-# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set
-CONFIG_MTD_REDBOOT_PARTS_READONLY=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_AFS_PARTS is not set
-# CONFIG_MTD_AR7_PARTS is not set
-
-#
-# User Modules And Translation Layers
-#
-CONFIG_MTD_CHAR=y
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-# CONFIG_FTL is not set
-# CONFIG_NFTL is not set
-# CONFIG_INFTL is not set
-# CONFIG_RFD_FTL is not set
-# CONFIG_SSFDC is not set
-# CONFIG_MTD_OOPS is not set
-
-#
-# RAM/ROM/Flash chip drivers
-#
-CONFIG_MTD_CFI=y
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_GEN_PROBE=y
-CONFIG_MTD_CFI_ADV_OPTIONS=y
-CONFIG_MTD_CFI_NOSWAP=y
-# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set
-# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set
-CONFIG_MTD_CFI_GEOMETRY=y
-# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_CFI_I1=y
-# CONFIG_MTD_CFI_I2 is not set
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-# CONFIG_MTD_OTP is not set
-# CONFIG_MTD_CFI_INTELEXT is not set
-CONFIG_MTD_CFI_AMDSTD=y
-# CONFIG_MTD_CFI_STAA is not set
-CONFIG_MTD_CFI_UTIL=y
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_XIP is not set
-
-#
-# Mapping drivers for chip access
-#
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=2
-# CONFIG_MTD_ARM_INTEGRATOR is not set
-# CONFIG_MTD_PLATRAM is not set
-
-#
-# Self-contained MTD device drivers
-#
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_MTDRAM is not set
-# CONFIG_MTD_BLOCK2MTD is not set
-
-#
-# Disk-On-Chip Device Drivers
-#
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_NAND is not set
-# CONFIG_MTD_ONENAND is not set
-
-#
-# UBI - Unsorted block images
-#
-# CONFIG_MTD_UBI is not set
-# CONFIG_PARPORT is not set
-# CONFIG_BLK_DEV is not set
-# CONFIG_MISC_DEVICES is not set
-CONFIG_HAVE_IDE=y
-# CONFIG_IDE is not set
-
-#
-# SCSI device support
-#
-# CONFIG_RAID_ATTRS is not set
-# CONFIG_SCSI is not set
-# CONFIG_SCSI_DMA is not set
-# CONFIG_SCSI_NETLINK is not set
-# CONFIG_ATA is not set
-# CONFIG_MD is not set
-CONFIG_NETDEVICES=y
-# CONFIG_DUMMY is not set
-# CONFIG_BONDING is not set
-# CONFIG_MACVLAN is not set
-# CONFIG_EQUALIZER is not set
-# CONFIG_TUN is not set
-# CONFIG_VETH is not set
-# CONFIG_PHYLIB is not set
-CONFIG_NET_ETHERNET=y
-CONFIG_MII=y
-# CONFIG_AX88796 is not set
-CONFIG_SMC91X=y
-# CONFIG_DM9000 is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_B44 is not set
-# CONFIG_NETDEV_1000 is not set
-# CONFIG_NETDEV_10000 is not set
-
-#
-# Wireless LAN
-#
-# CONFIG_WLAN_PRE80211 is not set
-# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
-# CONFIG_WAN is not set
-# CONFIG_PPP is not set
-# CONFIG_SLIP is not set
-# CONFIG_NETCONSOLE is not set
-# CONFIG_NETPOLL is not set
-# CONFIG_NET_POLL_CONTROLLER is not set
-# CONFIG_ISDN is not set
-
-#
-# Input device support
-#
-# CONFIG_INPUT is not set
-
-#
-# Hardware I/O ports
-#
-# CONFIG_SERIO is not set
-# CONFIG_GAMEPORT is not set
-
-#
-# Character devices
-#
-# CONFIG_VT is not set
-CONFIG_DEVKMEM=y
-# CONFIG_SERIAL_NONSTANDARD is not set
-
-#
-# Serial drivers
-#
-# CONFIG_SERIAL_8250 is not set
-
-#
-# Non-8250 serial port support
-#
-CONFIG_SERIAL_IMX=y
-CONFIG_SERIAL_IMX_CONSOLE=y
-CONFIG_SERIAL_CORE=y
-CONFIG_SERIAL_CORE_CONSOLE=y
-CONFIG_UNIX98_PTYS=y
-# CONFIG_LEGACY_PTYS is not set
-# CONFIG_IPMI_HANDLER is not set
-# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
-# CONFIG_R3964 is not set
-# CONFIG_RAW_DRIVER is not set
-# CONFIG_TCG_TPM is not set
-# CONFIG_I2C is not set
-# CONFIG_SPI is not set
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-CONFIG_GPIOLIB=y
-# CONFIG_GPIO_SYSFS is not set
-
-#
-# I2C GPIO expanders:
-#
-
-#
-# PCI GPIO expanders:
-#
-
-#
-# SPI GPIO expanders:
-#
-# CONFIG_W1 is not set
-# CONFIG_POWER_SUPPLY is not set
-# CONFIG_HWMON is not set
-# CONFIG_WATCHDOG is not set
-
-#
-# Sonics Silicon Backplane
-#
-CONFIG_SSB_POSSIBLE=y
-# CONFIG_SSB is not set
-
-#
-# Multifunction device drivers
-#
-# CONFIG_MFD_CORE is not set
-# CONFIG_MFD_SM501 is not set
-# CONFIG_HTC_EGPIO is not set
-# CONFIG_HTC_PASIC3 is not set
-# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
-# CONFIG_MFD_TC6393XB is not set
-
-#
-# Multimedia devices
-#
-
-#
-# Multimedia core support
-#
-# CONFIG_VIDEO_DEV is not set
-# CONFIG_DVB_CORE is not set
-# CONFIG_VIDEO_MEDIA is not set
-
-#
-# Multimedia drivers
-#
-# CONFIG_DAB is not set
-
-#
-# Graphics support
-#
-# CONFIG_VGASTATE is not set
-# CONFIG_VIDEO_OUTPUT_CONTROL is not set
-# CONFIG_FB is not set
-# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
-
-#
-# Display device support
-#
-# CONFIG_DISPLAY_SUPPORT is not set
-# CONFIG_SOUND is not set
-# CONFIG_USB_SUPPORT is not set
-# CONFIG_MMC is not set
-# CONFIG_NEW_LEDS is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RTC_CLASS is not set
-# CONFIG_DMADEVICES is not set
-
-#
-# Voltage and Current regulators
-#
-# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
-# CONFIG_UIO is not set
-
-#
-# File systems
-#
-# CONFIG_EXT2_FS is not set
-# CONFIG_EXT3_FS is not set
-# CONFIG_EXT4DEV_FS is not set
-# CONFIG_REISERFS_FS is not set
-# CONFIG_JFS_FS is not set
-# CONFIG_FS_POSIX_ACL is not set
-# CONFIG_XFS_FS is not set
-# CONFIG_OCFS2_FS is not set
-# CONFIG_DNOTIFY is not set
-CONFIG_INOTIFY=y
-CONFIG_INOTIFY_USER=y
-# CONFIG_QUOTA is not set
-# CONFIG_AUTOFS_FS is not set
-# CONFIG_AUTOFS4_FS is not set
-# CONFIG_FUSE_FS is not set
-
-#
-# CD-ROM/DVD Filesystems
-#
-# CONFIG_ISO9660_FS is not set
-# CONFIG_UDF_FS is not set
-
-#
-# DOS/FAT/NT Filesystems
-#
-# CONFIG_MSDOS_FS is not set
-# CONFIG_VFAT_FS is not set
-# CONFIG_NTFS_FS is not set
-
-#
-# Pseudo filesystems
-#
-CONFIG_PROC_FS=y
-CONFIG_PROC_SYSCTL=y
-CONFIG_SYSFS=y
-CONFIG_TMPFS=y
-# CONFIG_TMPFS_POSIX_ACL is not set
-# CONFIG_HUGETLB_PAGE is not set
-# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
-# CONFIG_ADFS_FS is not set
-# CONFIG_AFFS_FS is not set
-# CONFIG_HFS_FS is not set
-# CONFIG_HFSPLUS_FS is not set
-# CONFIG_BEFS_FS is not set
-# CONFIG_BFS_FS is not set
-# CONFIG_EFS_FS is not set
-CONFIG_JFFS2_FS=y
-CONFIG_JFFS2_FS_DEBUG=0
-CONFIG_JFFS2_FS_WRITEBUFFER=y
-# CONFIG_JFFS2_FS_WBUF_VERIFY is not set
-# CONFIG_JFFS2_SUMMARY is not set
-# CONFIG_JFFS2_FS_XATTR is not set
-# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set
-CONFIG_JFFS2_ZLIB=y
-# CONFIG_JFFS2_LZO is not set
-CONFIG_JFFS2_RTIME=y
-# CONFIG_JFFS2_RUBIN is not set
-# CONFIG_CRAMFS is not set
-# CONFIG_VXFS_FS is not set
-# CONFIG_MINIX_FS is not set
-# CONFIG_OMFS_FS is not set
-# CONFIG_HPFS_FS is not set
-# CONFIG_QNX4FS_FS is not set
-# CONFIG_ROMFS_FS is not set
-# CONFIG_SYSV_FS is not set
-# CONFIG_UFS_FS is not set
-CONFIG_NETWORK_FILESYSTEMS=y
-CONFIG_NFS_FS=y
-# CONFIG_NFS_V3 is not set
-# CONFIG_NFS_V4 is not set
-CONFIG_ROOT_NFS=y
-# CONFIG_NFSD is not set
-CONFIG_LOCKD=y
-CONFIG_NFS_COMMON=y
-CONFIG_SUNRPC=y
-# CONFIG_RPCSEC_GSS_KRB5 is not set
-# CONFIG_RPCSEC_GSS_SPKM3 is not set
-# CONFIG_SMB_FS is not set
-# CONFIG_CIFS is not set
-# CONFIG_NCP_FS is not set
-# CONFIG_CODA_FS is not set
-# CONFIG_AFS_FS is not set
-
-#
-# Partition Types
-#
-# CONFIG_PARTITION_ADVANCED is not set
-CONFIG_MSDOS_PARTITION=y
-# CONFIG_NLS is not set
-# CONFIG_DLM is not set
-
-#
-# Kernel hacking
-#
-# CONFIG_PRINTK_TIME is not set
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-CONFIG_FRAME_WARN=1024
-# CONFIG_MAGIC_SYSRQ is not set
-# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
-# CONFIG_HEADERS_CHECK is not set
-# CONFIG_DEBUG_KERNEL is not set
-# CONFIG_DEBUG_BUGVERBOSE is not set
-# CONFIG_DEBUG_MEMORY_INIT is not set
-CONFIG_FRAME_POINTER=y
-# CONFIG_LATENCYTOP is not set
-CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
-# CONFIG_IRQSOFF_TRACER is not set
-# CONFIG_PREEMPT_TRACER is not set
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_SAMPLES is not set
-CONFIG_HAVE_ARCH_KGDB=y
-# CONFIG_DEBUG_USER is not set
-
-#
-# Security options
-#
-# CONFIG_KEYS is not set
-# CONFIG_SECURITY is not set
-# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-# CONFIG_CRYPTO is not set
-
-#
-# Library routines
-#
-CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
-# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
-# CONFIG_CRC_T10DIF is not set
-# CONFIG_CRC_ITU_T is not set
-CONFIG_CRC32=y
-# CONFIG_CRC7 is not set
-# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-CONFIG_HAS_DMA=y
diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig
index 72a8201a537..20ada526f6d 100644
--- a/arch/arm/configs/mx3_defconfig
+++ b/arch/arm/configs/mx3_defconfig
@@ -197,7 +197,7 @@ CONFIG_MXC_PWM=y
#
CONFIG_CPU_32=y
CONFIG_CPU_V6=y
-CONFIG_CPU_32v6K=y
+# CONFIG_CPU_32v6K is not set
CONFIG_CPU_32v6=y
CONFIG_CPU_ABRT_EV6=y
CONFIG_CPU_PABRT_NOIFAR=y
diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig
index 020e6a8a9e5..5b98f764511 100644
--- a/arch/arm/configs/orion5x_defconfig
+++ b/arch/arm/configs/orion5x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.27-rc4
-# Fri Aug 22 12:38:51 2008
+# Linux kernel version: 2.6.30-rc4
+# Mon May 4 14:07:25 2009
#
CONFIG_ARM=y
CONFIG_SYS_SUPPORTS_APM_EMULATION=y
@@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y
# CONFIG_ARCH_HAS_ILOG2_U64 is not set
CONFIG_GENERIC_HWEIGHT=y
CONFIG_GENERIC_CALIBRATE_DELAY=y
-CONFIG_ARCH_SUPPORTS_AOUT=y
-CONFIG_ZONE_DMA=y
CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y
CONFIG_VECTORS_BASE=0xffff0000
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
@@ -44,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
-# CONFIG_CGROUPS is not set
# CONFIG_GROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
@@ -55,48 +62,45 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_UID16=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
# CONFIG_SLUB_DEBUG is not set
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
CONFIG_PROFILING=y
+CONFIG_TRACEPOINTS=y
# CONFIG_MARKERS is not set
CONFIG_OPROFILE=y
CONFIG_HAVE_OPROFILE=y
CONFIG_KPROBES=y
-# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set
CONFIG_KRETPROBES=y
-# CONFIG_HAVE_IOREMAP_PROT is not set
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_ARCH_TRACEHOOK is not set
-# CONFIG_HAVE_DMA_ATTRS is not set
-# CONFIG_USE_GENERIC_SMP_HELPERS is not set
-# CONFIG_HAVE_CLK is not set
-CONFIG_PROC_PAGE_MONITOR=y
+# CONFIG_SLOW_WORK is not set
CONFIG_HAVE_GENERIC_DMA_COHERENT=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -104,11 +108,8 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_FORCE_UNLOAD is not set
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-CONFIG_KMOD=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -124,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# System Type
@@ -134,10 +135,10 @@ CONFIG_CLASSIC_RCU=y
# CONFIG_ARCH_REALVIEW is not set
# CONFIG_ARCH_VERSATILE is not set
# CONFIG_ARCH_AT91 is not set
-# CONFIG_ARCH_CLPS7500 is not set
# CONFIG_ARCH_CLPS711X is not set
# CONFIG_ARCH_EBSA110 is not set
# CONFIG_ARCH_EP93XX is not set
+# CONFIG_ARCH_GEMINI is not set
# CONFIG_ARCH_FOOTBRIDGE is not set
# CONFIG_ARCH_NETX is not set
# CONFIG_ARCH_H720X is not set
@@ -158,14 +159,17 @@ CONFIG_CLASSIC_RCU=y
CONFIG_ARCH_ORION5X=y
# CONFIG_ARCH_PNX4008 is not set
# CONFIG_ARCH_PXA is not set
+# CONFIG_ARCH_MMP is not set
# CONFIG_ARCH_RPC is not set
# CONFIG_ARCH_SA1100 is not set
# CONFIG_ARCH_S3C2410 is not set
+# CONFIG_ARCH_S3C64XX is not set
# CONFIG_ARCH_SHARK is not set
# CONFIG_ARCH_LH7A40X is not set
# CONFIG_ARCH_DAVINCI is not set
# CONFIG_ARCH_OMAP is not set
-# CONFIG_ARCH_MSM7X00A is not set
+# CONFIG_ARCH_MSM is not set
+# CONFIG_ARCH_W90X900 is not set
#
# Orion Implementations
@@ -175,6 +179,7 @@ CONFIG_MACH_RD88F5182=y
CONFIG_MACH_KUROBOX_PRO=y
CONFIG_MACH_DNS323=y
CONFIG_MACH_TS209=y
+CONFIG_MACH_TERASTATION_PRO2=y
CONFIG_MACH_LINKSTATION_PRO=y
CONFIG_MACH_LINKSTATION_MINI=y
CONFIG_MACH_TS409=y
@@ -187,14 +192,6 @@ CONFIG_MACH_WNR854T=y
CONFIG_MACH_RD88F5181L_GE=y
CONFIG_MACH_RD88F5181L_FXO=y
CONFIG_MACH_RD88F6183AP_GE=y
-
-#
-# Boot options
-#
-
-#
-# Power management
-#
CONFIG_PLAT_ORION=y
#
@@ -228,6 +225,8 @@ CONFIG_PCI_SYSCALL=y
# CONFIG_ARCH_SUPPORTS_MSI is not set
CONFIG_PCI_LEGACY=y
# CONFIG_PCI_DEBUG is not set
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
#
@@ -237,25 +236,32 @@ CONFIG_TICK_ONESHOT=y
CONFIG_NO_HZ=y
CONFIG_HIGH_RES_TIMERS=y
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
+CONFIG_VMSPLIT_3G=y
+# CONFIG_VMSPLIT_2G is not set
+# CONFIG_VMSPLIT_1G is not set
+CONFIG_PAGE_OFFSET=0xC0000000
CONFIG_PREEMPT=y
CONFIG_HZ=100
CONFIG_AEABI=y
CONFIG_OABI_COMPAT=y
-# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set
+CONFIG_ARCH_FLATMEM_HAS_HOLES=y
+# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
+# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
+# CONFIG_HIGHMEM is not set
CONFIG_SELECT_MEMORY_MODEL=y
CONFIG_FLATMEM_MANUAL=y
# CONFIG_DISCONTIGMEM_MANUAL is not set
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4096
-# CONFIG_RESOURCES_64BIT is not set
-CONFIG_ZONE_DMA_FLAG=1
-CONFIG_BOUNCE=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
+CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_LEDS=y
CONFIG_LEDS_CPU=y
CONFIG_ALIGNMENT_TRAP=y
@@ -270,6 +276,11 @@ CONFIG_CMDLINE=""
# CONFIG_KEXEC is not set
#
+# CPU Power Management
+#
+# CONFIG_CPU_IDLE is not set
+
+#
# Floating point emulation
#
@@ -285,13 +296,18 @@ CONFIG_VFP=y
# Userspace binary formats
#
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+CONFIG_HAVE_AOUT=y
# CONFIG_BINFMT_AOUT is not set
# CONFIG_BINFMT_MISC is not set
#
# Power management options
#
-# CONFIG_PM is not set
+CONFIG_PM=y
+# CONFIG_PM_DEBUG is not set
+# CONFIG_SUSPEND is not set
+# CONFIG_APM_EMULATION is not set
CONFIG_ARCH_SUSPEND_POSSIBLE=y
CONFIG_NET=y
@@ -328,7 +344,7 @@ CONFIG_IP_PNP_BOOTP=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -343,6 +359,15 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+CONFIG_NET_DSA=y
+CONFIG_NET_DSA_TAG_DSA=y
+CONFIG_NET_DSA_TAG_EDSA=y
+# CONFIG_NET_DSA_TAG_TRAILER is not set
+CONFIG_NET_DSA_MV88E6XXX=y
+# CONFIG_NET_DSA_MV88E6060 is not set
+CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y
+CONFIG_NET_DSA_MV88E6131=y
+CONFIG_NET_DSA_MV88E6123_61_65=y
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -352,27 +377,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
#
CONFIG_NET_PKTGEN=m
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
CONFIG_WIRELESS_EXT_SYSFS=y
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -397,6 +424,7 @@ CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
# CONFIG_MTD_CONCAT is not set
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
# CONFIG_MTD_AFS_PARTS is not set
@@ -450,9 +478,7 @@ CONFIG_MTD_CFI_UTIL=y
#
# CONFIG_MTD_COMPLEX_MAPPINGS is not set
CONFIG_MTD_PHYSMAP=y
-CONFIG_MTD_PHYSMAP_START=0x0
-CONFIG_MTD_PHYSMAP_LEN=0x0
-CONFIG_MTD_PHYSMAP_BANKWIDTH=0
+# CONFIG_MTD_PHYSMAP_COMPAT is not set
# CONFIG_MTD_ARM_INTEGRATOR is not set
# CONFIG_MTD_IMPA7 is not set
# CONFIG_MTD_INTEL_VR_NOR is not set
@@ -477,6 +503,7 @@ CONFIG_MTD_NAND=y
CONFIG_MTD_NAND_VERIFY_WRITE=y
# CONFIG_MTD_NAND_ECC_SMC is not set
# CONFIG_MTD_NAND_MUSEUM_IDS is not set
+# CONFIG_MTD_NAND_GPIO is not set
CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_DISKONCHIP is not set
# CONFIG_MTD_NAND_CAFE is not set
@@ -487,6 +514,11 @@ CONFIG_MTD_NAND_ORION=y
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
@@ -507,11 +539,20 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_ATA_OVER_ETH is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -569,7 +610,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
+# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
+# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_FUTURE_DOMAIN is not set
# CONFIG_SCSI_IPS is not set
@@ -589,6 +634,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -663,6 +709,7 @@ CONFIG_SATA_MV=y
# CONFIG_IEEE1394 is not set
# CONFIG_I2O is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -670,7 +717,26 @@ CONFIG_NETDEVICES=y
# CONFIG_TUN is not set
# CONFIG_VETH is not set
# CONFIG_ARCNET is not set
-# CONFIG_PHYLIB is not set
+CONFIG_PHYLIB=y
+
+#
+# MII PHY device drivers
+#
+CONFIG_MARVELL_PHY=y
+# CONFIG_DAVICOM_PHY is not set
+# CONFIG_QSEMI_PHY is not set
+# CONFIG_LXT_PHY is not set
+# CONFIG_CICADA_PHY is not set
+# CONFIG_VITESSE_PHY is not set
+# CONFIG_SMSC_PHY is not set
+# CONFIG_BROADCOM_PHY is not set
+# CONFIG_ICPLUS_PHY is not set
+# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
+# CONFIG_FIXED_PHY is not set
+# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
# CONFIG_AX88796 is not set
@@ -680,19 +746,25 @@ CONFIG_MII=y
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_SMC91X is not set
# CONFIG_DM9000 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_SMC911X is not set
+# CONFIG_SMSC911X is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
CONFIG_NET_PCI=y
# CONFIG_PCNET32 is not set
# CONFIG_AMD8111_ETH is not set
# CONFIG_ADAPTEC_STARFIRE is not set
# CONFIG_B44 is not set
# CONFIG_FORCEDETH is not set
-# CONFIG_EEPRO100 is not set
# CONFIG_E100 is not set
# CONFIG_FEALNX is not set
# CONFIG_NATSEMI is not set
@@ -702,10 +774,12 @@ CONFIG_NET_PCI=y
# CONFIG_R6040 is not set
# CONFIG_SIS900 is not set
# CONFIG_EPIC100 is not set
+# CONFIG_SMSC9420 is not set
# CONFIG_SUNDANCE is not set
# CONFIG_TLAN is not set
# CONFIG_VIA_RHINE is not set
# CONFIG_SC92031 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
@@ -713,6 +787,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -727,6 +802,8 @@ CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -735,7 +812,10 @@ CONFIG_MV643XX_ETH=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
@@ -819,11 +899,11 @@ CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=16
# CONFIG_IPMI_HANDLER is not set
# CONFIG_HW_RANDOM is not set
-# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
# CONFIG_RAW_DRIVER is not set
@@ -886,12 +966,9 @@ CONFIG_I2C_MV64XXX=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -911,14 +988,17 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -933,10 +1013,15 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -956,12 +1041,14 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
+# CONFIG_THERMAL is not set
+# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
@@ -970,9 +1057,12 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
# CONFIG_MFD_TMIO is not set
-# CONFIG_MFD_T7L66XB is not set
-# CONFIG_MFD_TC6387XB is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
#
# Multimedia devices
@@ -1013,9 +1103,36 @@ CONFIG_HID=y
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1030,10 +1147,13 @@ CONFIG_USB=y
CONFIG_USB_DEVICEFS=y
CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_DYNAMIC_MINORS is not set
+# CONFIG_USB_SUSPEND is not set
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
# CONFIG_USB_MON is not set
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
@@ -1042,12 +1162,15 @@ CONFIG_USB_DEVICE_CLASS=y
CONFIG_USB_EHCI_HCD=y
CONFIG_USB_EHCI_ROOT_HUB_TT=y
CONFIG_USB_EHCI_TT_NEWSCHED=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
@@ -1055,20 +1178,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y
# CONFIG_USB_ACM is not set
CONFIG_USB_PRINTER=y
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
CONFIG_USB_STORAGE_DATAFAB=y
CONFIG_USB_STORAGE_FREECOM=y
# CONFIG_USB_STORAGE_ISD200 is not set
-CONFIG_USB_STORAGE_DPCM=y
# CONFIG_USB_STORAGE_USBAT is not set
CONFIG_USB_STORAGE_SDDR09=y
CONFIG_USB_STORAGE_SDDR55=y
@@ -1076,7 +1199,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
-# CONFIG_USB_STORAGE_SIERRA is not set
# CONFIG_USB_STORAGE_CYPRESS_ATACB is not set
# CONFIG_USB_LIBUSUAL is not set
@@ -1097,6 +1219,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1104,7 +1227,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1114,8 +1236,18 @@ CONFIG_USB_STORAGE_JUMPSHOT=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
+# CONFIG_MEMSTICK is not set
+# CONFIG_ACCESSIBILITY is not set
CONFIG_NEW_LEDS=y
CONFIG_LEDS_CLASS=y
@@ -1124,7 +1256,10 @@ CONFIG_LEDS_CLASS=y
#
# CONFIG_LEDS_PCA9532 is not set
CONFIG_LEDS_GPIO=y
+CONFIG_LEDS_GPIO_PLATFORM=y
+# CONFIG_LEDS_LP5521 is not set
# CONFIG_LEDS_PCA955X is not set
+# CONFIG_LEDS_BD2802 is not set
#
# LED Triggers
@@ -1132,7 +1267,12 @@ CONFIG_LEDS_GPIO=y
CONFIG_LEDS_TRIGGERS=y
CONFIG_LEDS_TRIGGER_TIMER=y
CONFIG_LEDS_TRIGGER_HEARTBEAT=y
+# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set
CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
+
+#
+# iptables trigger is under Netfilter config (LED target)
+#
CONFIG_RTC_LIB=y
CONFIG_RTC_CLASS=y
CONFIG_RTC_HCTOSYS=y
@@ -1164,6 +1304,7 @@ CONFIG_RTC_DRV_M41T80=y
# CONFIG_RTC_DRV_M41T80_WDT is not set
CONFIG_RTC_DRV_S35390A=y
# CONFIG_RTC_DRV_FM3130 is not set
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
@@ -1173,12 +1314,15 @@ CONFIG_RTC_DRV_S35390A=y
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
CONFIG_RTC_DRV_M48T86=y
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
@@ -1196,16 +1340,12 @@ CONFIG_DMA_ENGINE=y
# DMA Clients
#
# CONFIG_NET_DMA is not set
+# CONFIG_ASYNC_TX_DMA is not set
# CONFIG_DMATEST is not set
-
-#
-# Voltage and Current regulators
-#
+# CONFIG_AUXDISPLAY is not set
# CONFIG_REGULATOR is not set
-# CONFIG_REGULATOR_FIXED_VOLTAGE is not set
-# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set
-# CONFIG_REGULATOR_BQ24022 is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -1214,14 +1354,25 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
-# CONFIG_EXT4DEV_FS is not set
+CONFIG_EXT4_FS=m
+# CONFIG_EXT4DEV_COMPAT is not set
+CONFIG_EXT4_FS_XATTR=y
+# CONFIG_EXT4_FS_POSIX_ACL is not set
+# CONFIG_EXT4_FS_SECURITY is not set
CONFIG_JBD=y
+# CONFIG_JBD_DEBUG is not set
+CONFIG_JBD2=m
+# CONFIG_JBD2_DEBUG is not set
+CONFIG_FS_MBCACHE=m
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1231,6 +1382,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
@@ -1254,15 +1410,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1"
#
CONFIG_PROC_FS=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1282,6 +1436,7 @@ CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
# CONFIG_OMFS_FS is not set
@@ -1290,6 +1445,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1381,13 +1537,16 @@ CONFIG_ENABLE_MUST_CHECK=y
CONFIG_FRAME_WARN=1024
CONFIG_MAGIC_SYSRQ=y
# CONFIG_UNUSED_SYMBOLS is not set
-# CONFIG_DEBUG_FS is not set
+CONFIG_DEBUG_FS=y
# CONFIG_HEADERS_CHECK is not set
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
# CONFIG_TIMER_STATS is not set
@@ -1411,25 +1570,46 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_MEMORY_INIT is not set
# CONFIG_DEBUG_LIST is not set
# CONFIG_DEBUG_SG is not set
+# CONFIG_DEBUG_NOTIFIERS is not set
CONFIG_FRAME_POINTER=y
# CONFIG_BOOT_PRINTK_DELAY is not set
# CONFIG_RCU_TORTURE_TEST is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_KPROBES_SANITY_TEST is not set
# CONFIG_BACKTRACE_SELF_TEST is not set
+# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_LKDTM is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_LATENCYTOP=y
CONFIG_SYSCTL_SYSCALL_CHECK=y
-CONFIG_HAVE_FTRACE=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-# CONFIG_FTRACE is not set
+# CONFIG_PAGE_POISONING is not set
+CONFIG_NOP_TRACER=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_RING_BUFFER=y
+CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_FTRACE_STARTUP_TEST is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
+CONFIG_ARM_UNWIND=y
CONFIG_DEBUG_USER=y
CONFIG_DEBUG_ERRORS=y
# CONFIG_DEBUG_STACK_USAGE is not set
@@ -1441,18 +1621,27 @@ CONFIG_DEBUG_LL=y
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
-CONFIG_ASYNC_CORE=y
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
CONFIG_CRYPTO_ALGAPI=m
+CONFIG_CRYPTO_ALGAPI2=m
+CONFIG_CRYPTO_AEAD2=m
CONFIG_CRYPTO_BLKCIPHER=m
+CONFIG_CRYPTO_BLKCIPHER2=m
+CONFIG_CRYPTO_HASH2=m
+CONFIG_CRYPTO_RNG2=m
+CONFIG_CRYPTO_PCOMP=m
CONFIG_CRYPTO_MANAGER=m
+CONFIG_CRYPTO_MANAGER2=m
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=m
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1521,18 +1710,24 @@ CONFIG_CRYPTO_PCBC=m
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
-# CONFIG_GENERIC_FIND_NEXT_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
-# CONFIG_CRC16 is not set
+CONFIG_CRC16=m
CONFIG_CRC_T10DIF=y
CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
@@ -1540,7 +1735,7 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
+CONFIG_NLATTR=y
diff --git a/arch/arm/configs/viper_defconfig b/arch/arm/configs/viper_defconfig
index 30f463d2fa8..6ab5dd5868d 100644
--- a/arch/arm/configs/viper_defconfig
+++ b/arch/arm/configs/viper_defconfig
@@ -298,7 +298,6 @@ CONFIG_CPU_FREQ_GOV_POWERSAVE=m
CONFIG_CPU_FREQ_GOV_USERSPACE=m
CONFIG_CPU_FREQ_GOV_ONDEMAND=m
CONFIG_CPU_FREQ_GOV_CONSERVATIVE=m
-CONFIG_CPU_FREQ_PXA=y
#
# Floating point emulation
diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h
index d7da19bcf92..c207504de84 100644
--- a/arch/arm/include/asm/elf.h
+++ b/arch/arm/include/asm/elf.h
@@ -45,13 +45,15 @@ typedef struct user_fp elf_fpregset_t;
#define EF_ARM_HASENTRY 0x00000002 /* All */
#define EF_ARM_RELEXEC 0x00000001 /* All */
-#define R_ARM_NONE 0
-#define R_ARM_PC24 1
-#define R_ARM_ABS32 2
-#define R_ARM_CALL 28
-#define R_ARM_JUMP24 29
-#define R_ARM_V4BX 40
-#define R_ARM_PREL31 42
+#define R_ARM_NONE 0
+#define R_ARM_PC24 1
+#define R_ARM_ABS32 2
+#define R_ARM_CALL 28
+#define R_ARM_JUMP24 29
+#define R_ARM_V4BX 40
+#define R_ARM_PREL31 42
+#define R_ARM_MOVW_ABS_NC 43
+#define R_ARM_MOVT_ABS 44
/*
* These are used to set parameters in the core dumps.
diff --git a/arch/arm/include/asm/hardware/gic.h b/arch/arm/include/asm/hardware/gic.h
index 4924914af18..7f34333bb54 100644
--- a/arch/arm/include/asm/hardware/gic.h
+++ b/arch/arm/include/asm/hardware/gic.h
@@ -36,7 +36,7 @@
void gic_dist_init(unsigned int gic_nr, void __iomem *base, unsigned int irq_start);
void gic_cpu_init(unsigned int gic_nr, void __iomem *base);
void gic_cascade_irq(unsigned int gic_nr, unsigned int irq);
-void gic_raise_softirq(cpumask_t cpumask, unsigned int irq);
+void gic_raise_softirq(const struct cpumask *mask, unsigned int irq);
#endif
#endif
diff --git a/arch/arm/include/asm/smp.h b/arch/arm/include/asm/smp.h
index fad70da5911..5995935338e 100644
--- a/arch/arm/include/asm/smp.h
+++ b/arch/arm/include/asm/smp.h
@@ -53,17 +53,12 @@ extern void smp_store_cpu_info(unsigned int cpuid);
/*
* Raise an IPI cross call on CPUs in callmap.
*/
-extern void smp_cross_call(cpumask_t callmap);
-
-/*
- * Broadcast a timer interrupt to the other CPUs.
- */
-extern void smp_send_timer(void);
+extern void smp_cross_call(const struct cpumask *mask);
/*
* Broadcast a clock event to other CPUs.
*/
-extern void smp_timer_broadcast(cpumask_t mask);
+extern void smp_timer_broadcast(const struct cpumask *mask);
/*
* Boot a secondary CPU, and assign it the specified idle task.
@@ -102,7 +97,8 @@ extern int platform_cpu_kill(unsigned int cpu);
extern void platform_cpu_enable(unsigned int cpu);
extern void arch_send_call_function_single_ipi(int cpu);
-extern void arch_send_call_function_ipi(cpumask_t mask);
+extern void arch_send_call_function_ipi_mask(const struct cpumask *mask);
+#define arch_send_call_function_ipi_mask arch_send_call_function_ipi_mask
/*
* Local timer interrupt handling function (can be IPI'ed).
diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c
index d1731e39b49..bac03c81489 100644
--- a/arch/arm/kernel/module.c
+++ b/arch/arm/kernel/module.c
@@ -169,6 +169,21 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex,
*(u32 *)loc = offset & 0x7fffffff;
break;
+ case R_ARM_MOVW_ABS_NC:
+ case R_ARM_MOVT_ABS:
+ offset = *(u32 *)loc;
+ offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff);
+ offset = (offset ^ 0x8000) - 0x8000;
+
+ offset += sym->st_value;
+ if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS)
+ offset >>= 16;
+
+ *(u32 *)loc &= 0xfff0f000;
+ *(u32 *)loc |= ((offset & 0xf000) << 4) |
+ (offset & 0x0fff);
+ break;
+
default:
printk(KERN_ERR "%s: unknown relocation: %u\n",
module->name, ELF32_R_TYPE(rel->r_info));
diff --git a/arch/arm/kernel/smp.c b/arch/arm/kernel/smp.c
index 7801aac3c04..6014dfd22af 100644
--- a/arch/arm/kernel/smp.c
+++ b/arch/arm/kernel/smp.c
@@ -326,14 +326,14 @@ void __init smp_prepare_boot_cpu(void)
per_cpu(cpu_data, cpu).idle = current;
}
-static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
+static void send_ipi_message(const struct cpumask *mask, enum ipi_msg_type msg)
{
unsigned long flags;
unsigned int cpu;
local_irq_save(flags);
- for_each_cpu_mask(cpu, callmap) {
+ for_each_cpu(cpu, mask) {
struct ipi_data *ipi = &per_cpu(ipi_data, cpu);
spin_lock(&ipi->lock);
@@ -344,19 +344,19 @@ static void send_ipi_message(cpumask_t callmap, enum ipi_msg_type msg)
/*
* Call the platform specific cross-CPU call function.
*/
- smp_cross_call(callmap);
+ smp_cross_call(mask);
local_irq_restore(flags);
}
-void arch_send_call_function_ipi(cpumask_t mask)
+void arch_send_call_function_ipi_mask(const struct cpumask *mask)
{
send_ipi_message(mask, IPI_CALL_FUNC);
}
void arch_send_call_function_single_ipi(int cpu)
{
- send_ipi_message(cpumask_of_cpu(cpu), IPI_CALL_FUNC_SINGLE);
+ send_ipi_message(cpumask_of(cpu), IPI_CALL_FUNC_SINGLE);
}
void show_ipi_list(struct seq_file *p)
@@ -498,17 +498,10 @@ asmlinkage void __exception do_IPI(struct pt_regs *regs)
void smp_send_reschedule(int cpu)
{
- send_ipi_message(cpumask_of_cpu(cpu), IPI_RESCHEDULE);
+ send_ipi_message(cpumask_of(cpu), IPI_RESCHEDULE);
}
-void smp_send_timer(void)
-{
- cpumask_t mask = cpu_online_map;
- cpu_clear(smp_processor_id(), mask);
- send_ipi_message(mask, IPI_TIMER);
-}
-
-void smp_timer_broadcast(cpumask_t mask)
+void smp_timer_broadcast(const struct cpumask *mask)
{
send_ipi_message(mask, IPI_TIMER);
}
@@ -517,7 +510,7 @@ void smp_send_stop(void)
{
cpumask_t mask = cpu_online_map;
cpu_clear(smp_processor_id(), mask);
- send_ipi_message(mask, IPI_CPU_STOP);
+ send_ipi_message(&mask, IPI_CPU_STOP);
}
/*
@@ -528,20 +521,17 @@ int setup_profiling_timer(unsigned int multiplier)
return -EINVAL;
}
-static int
-on_each_cpu_mask(void (*func)(void *), void *info, int wait, cpumask_t mask)
+static void
+on_each_cpu_mask(void (*func)(void *), void *info, int wait,
+ const struct cpumask *mask)
{
- int ret = 0;
-
preempt_disable();
- ret = smp_call_function_mask(mask, func, info, wait);
- if (cpu_isset(smp_processor_id(), mask))
+ smp_call_function_many(mask, func, info, wait);
+ if (cpumask_test_cpu(smp_processor_id(), mask))
func(info);
preempt_enable();
-
- return ret;
}
/**********************************************************************/
@@ -602,20 +592,17 @@ void flush_tlb_all(void)
void flush_tlb_mm(struct mm_struct *mm)
{
- cpumask_t mask = mm->cpu_vm_mask;
-
- on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, mask);
+ on_each_cpu_mask(ipi_flush_tlb_mm, mm, 1, &mm->cpu_vm_mask);
}
void flush_tlb_page(struct vm_area_struct *vma, unsigned long uaddr)
{
- cpumask_t mask = vma->vm_mm->cpu_vm_mask;
struct tlb_args ta;
ta.ta_vma = vma;
ta.ta_start = uaddr;
- on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, mask);
+ on_each_cpu_mask(ipi_flush_tlb_page, &ta, 1, &vma->vm_mm->cpu_vm_mask);
}
void flush_tlb_kernel_page(unsigned long kaddr)
@@ -630,14 +617,13 @@ void flush_tlb_kernel_page(unsigned long kaddr)
void flush_tlb_range(struct vm_area_struct *vma,
unsigned long start, unsigned long end)
{
- cpumask_t mask = vma->vm_mm->cpu_vm_mask;
struct tlb_args ta;
ta.ta_vma = vma;
ta.ta_start = start;
ta.ta_end = end;
- on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, mask);
+ on_each_cpu_mask(ipi_flush_tlb_range, &ta, 1, &vma->vm_mm->cpu_vm_mask);
}
void flush_tlb_kernel_range(unsigned long start, unsigned long end)
diff --git a/arch/arm/mach-davinci/Kconfig b/arch/arm/mach-davinci/Kconfig
index bac988e7a4c..a9c78bc72b8 100644
--- a/arch/arm/mach-davinci/Kconfig
+++ b/arch/arm/mach-davinci/Kconfig
@@ -4,19 +4,56 @@ menu "TI DaVinci Implementations"
comment "DaVinci Core Type"
-config ARCH_DAVINCI644x
- default y
+config ARCH_DAVINCI_DM644x
bool "DaVinci 644x based system"
comment "DaVinci Board Type"
config MACH_DAVINCI_EVM
- bool "TI DaVinci EVM"
+ bool "TI DM644x EVM"
default y
- depends on ARCH_DAVINCI644x
+ depends on ARCH_DAVINCI_DM644x
help
Configure this option to specify the whether the board used
- for development is a DaVinci EVM
+ for development is a DM644x EVM
+
+
+config DAVINCI_MUX
+ bool "DAVINCI multiplexing support"
+ depends on ARCH_DAVINCI
+ default y
+ help
+ Pin multiplexing support for DAVINCI boards. If your bootloader
+ sets the multiplexing correctly, say N. Otherwise, or if unsure,
+ say Y.
+
+config DAVINCI_MUX_DEBUG
+ bool "Multiplexing debug output"
+ depends on DAVINCI_MUX
+ help
+ Makes the multiplexing functions print out a lot of debug info.
+ This is useful if you want to find out the correct values of the
+ multiplexing registers.
+
+config DAVINCI_MUX_WARNINGS
+ bool "Warn about pins the bootloader didn't set up"
+ depends on DAVINCI_MUX
+ help
+ Choose Y here to warn whenever driver initialization logic needs
+ to change the pin multiplexing setup. When there are no warnings
+ printed, it's safe to deselect DAVINCI_MUX for your product.
+
+config DAVINCI_RESET_CLOCKS
+ bool "Reset unused clocks during boot"
+ depends on ARCH_DAVINCI
+ help
+ Say Y if you want to reset unused clocks during boot.
+ This option saves power, but assumes all drivers are
+ using the clock framework. Broken drivers that do not
+ yet use clock framework may not work with this option.
+ If you are booting from another operating system, you
+ probably do not want this option enabled until your
+ device drivers work properly.
endmenu
diff --git a/arch/arm/mach-davinci/Makefile b/arch/arm/mach-davinci/Makefile
index 4dc458597f4..1674661942f 100644
--- a/arch/arm/mach-davinci/Makefile
+++ b/arch/arm/mach-davinci/Makefile
@@ -5,7 +5,12 @@
# Common objects
obj-y := time.o irq.o clock.o serial.o io.o id.o psc.o \
- gpio.o mux.o devices.o usb.o
+ gpio.o devices.o dma.o usb.o
+
+obj-$(CONFIG_DAVINCI_MUX) += mux.o
+
+# Chip specific
+obj-$(CONFIG_ARCH_DAVINCI_DM644x) += dm644x.o
# Board specific
-obj-$(CONFIG_MACH_DAVINCI_EVM) += board-evm.o
+obj-$(CONFIG_MACH_DAVINCI_EVM) += board-dm644x-evm.o
diff --git a/arch/arm/mach-davinci/board-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c
index 0b97a528902..b2e7f9c63bc 100644
--- a/arch/arm/mach-davinci/board-evm.c
+++ b/arch/arm/mach-davinci/board-dm644x-evm.c
@@ -15,15 +15,20 @@
#include <linux/platform_device.h>
#include <linux/gpio.h>
#include <linux/leds.h>
+#include <linux/memory.h>
+#include <linux/etherdevice.h>
#include <linux/i2c.h>
#include <linux/i2c/pcf857x.h>
#include <linux/i2c/at24.h>
#include <linux/mtd/mtd.h>
+#include <linux/mtd/nand.h>
#include <linux/mtd/partitions.h>
#include <linux/mtd/physmap.h>
#include <linux/io.h>
+#include <linux/phy.h>
+#include <linux/clk.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
@@ -32,25 +37,34 @@
#include <asm/mach/map.h>
#include <asm/mach/flash.h>
-#include <mach/hardware.h>
+#include <mach/dm644x.h>
#include <mach/common.h>
#include <mach/i2c.h>
+#include <mach/serial.h>
+#include <mach/mux.h>
+#include <mach/psc.h>
+#include <mach/nand.h>
-/* other misc. init functions */
-void __init davinci_psc_init(void);
-void __init davinci_irq_init(void);
-void __init davinci_map_common_io(void);
-void __init davinci_init_common_hw(void);
+#define DM644X_EVM_PHY_MASK (0x2)
+#define DM644X_EVM_MDIO_FREQUENCY (2200000) /* PHY bus frequency */
-#if defined(CONFIG_MTD_PHYSMAP) || \
- defined(CONFIG_MTD_PHYSMAP_MODULE)
+#define DAVINCI_CFC_ATA_BASE 0x01C66000
+
+#define DAVINCI_ASYNC_EMIF_CONTROL_BASE 0x01e00000
+#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE 0x02000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE 0x04000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE 0x06000000
+#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE 0x08000000
+
+#define LXT971_PHY_ID (0x001378e2)
+#define LXT971_PHY_MASK (0xfffffff0)
static struct mtd_partition davinci_evm_norflash_partitions[] = {
- /* bootloader (U-Boot, etc) in first 4 sectors */
+ /* bootloader (UBL, U-Boot, etc) in first 5 sectors */
{
.name = "bootloader",
.offset = 0,
- .size = 4 * SZ_64K,
+ .size = 5 * SZ_64K,
.mask_flags = MTD_WRITEABLE, /* force read-only */
},
/* bootloader params in the next 1 sectors */
@@ -100,10 +114,89 @@ static struct platform_device davinci_evm_norflash_device = {
.resource = &davinci_evm_norflash_resource,
};
-#endif
+/* DM644x EVM includes a 64 MByte small-page NAND flash (16K blocks).
+ * It may used instead of the (default) NOR chip to boot, using TI's
+ * tools to install the secondary boot loader (UBL) and U-Boot.
+ */
+struct mtd_partition davinci_evm_nandflash_partition[] = {
+ /* Bootloader layout depends on whose u-boot is installed, but we
+ * can hide all the details.
+ * - block 0 for u-boot environment ... in mainline u-boot
+ * - block 1 for UBL (plus up to four backup copies in blocks 2..5)
+ * - blocks 6...? for u-boot
+ * - blocks 16..23 for u-boot environment ... in TI's u-boot
+ */
+ {
+ .name = "bootloader",
+ .offset = 0,
+ .size = SZ_256K + SZ_128K,
+ .mask_flags = MTD_WRITEABLE, /* force read-only */
+ },
+ /* Kernel */
+ {
+ .name = "kernel",
+ .offset = MTDPART_OFS_APPEND,
+ .size = SZ_4M,
+ .mask_flags = 0,
+ },
+ /* File system (older GIT kernels started this on the 5MB mark) */
+ {
+ .name = "filesystem",
+ .offset = MTDPART_OFS_APPEND,
+ .size = MTDPART_SIZ_FULL,
+ .mask_flags = 0,
+ }
+ /* A few blocks at end hold a flash BBT ... created by TI's CCS
+ * using flashwriter_nand.out, but ignored by TI's versions of
+ * Linux and u-boot. We boot faster by using them.
+ */
+};
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
- defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+static struct davinci_nand_pdata davinci_evm_nandflash_data = {
+ .parts = davinci_evm_nandflash_partition,
+ .nr_parts = ARRAY_SIZE(davinci_evm_nandflash_partition),
+ .ecc_mode = NAND_ECC_HW,
+ .options = NAND_USE_FLASH_BBT,
+};
+
+static struct resource davinci_evm_nandflash_resource[] = {
+ {
+ .start = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE,
+ .end = DAVINCI_ASYNC_EMIF_DATA_CE0_BASE + SZ_16M - 1,
+ .flags = IORESOURCE_MEM,
+ }, {
+ .start = DAVINCI_ASYNC_EMIF_CONTROL_BASE,
+ .end = DAVINCI_ASYNC_EMIF_CONTROL_BASE + SZ_4K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct platform_device davinci_evm_nandflash_device = {
+ .name = "davinci_nand",
+ .id = 0,
+ .dev = {
+ .platform_data = &davinci_evm_nandflash_data,
+ },
+ .num_resources = ARRAY_SIZE(davinci_evm_nandflash_resource),
+ .resource = davinci_evm_nandflash_resource,
+};
+
+static u64 davinci_fb_dma_mask = DMA_BIT_MASK(32);
+
+static struct platform_device davinci_fb_device = {
+ .name = "davincifb",
+ .id = -1,
+ .dev = {
+ .dma_mask = &davinci_fb_dma_mask,
+ .coherent_dma_mask = DMA_BIT_MASK(32),
+ },
+ .num_resources = 0,
+};
+
+static struct platform_device rtc_dev = {
+ .name = "rtc_davinci_evm",
+ .id = -1,
+};
static struct resource ide_resources[] = {
{
@@ -131,8 +224,6 @@ static struct platform_device ide_dev = {
},
};
-#endif
-
/*----------------------------------------------------------------------*/
/*
@@ -311,7 +402,9 @@ evm_u35_setup(struct i2c_client *client, int gpio, unsigned ngpio, void *c)
gpio_request(gpio + 7, "nCF_SEL");
gpio_direction_output(gpio + 7, 1);
- /* irlml6401 sustains over 3A, switches 5V in under 8 msec */
+ /* irlml6401 switches over 1A, in under 8 msec;
+ * now it can be managed by nDRV_VBUS ...
+ */
setup_usb(500, 8);
return 0;
@@ -343,14 +436,120 @@ static struct pcf857x_platform_data pcf_data_u35 = {
* - 0x0039, 1 byte NTSC vs PAL (bit 0x80 == PAL)
* - ... newer boards may have more
*/
+static struct memory_accessor *at24_mem_acc;
+
+static void at24_setup(struct memory_accessor *mem_acc, void *context)
+{
+ DECLARE_MAC_BUF(mac_str);
+ char mac_addr[6];
+
+ at24_mem_acc = mem_acc;
+
+ /* Read MAC addr from EEPROM */
+ if (at24_mem_acc->read(at24_mem_acc, mac_addr, 0x7f00, 6) == 6) {
+ printk(KERN_INFO "Read MAC addr from EEPROM: %s\n",
+ print_mac(mac_str, mac_addr));
+ }
+}
+
static struct at24_platform_data eeprom_info = {
.byte_len = (256*1024) / 8,
.page_size = 64,
.flags = AT24_FLAG_ADDR16,
+ .setup = at24_setup,
};
+int dm6446evm_eeprom_read(void *buf, off_t off, size_t count)
+{
+ if (at24_mem_acc)
+ return at24_mem_acc->read(at24_mem_acc, buf, off, count);
+ return -ENODEV;
+}
+EXPORT_SYMBOL(dm6446evm_eeprom_read);
+
+int dm6446evm_eeprom_write(void *buf, off_t off, size_t count)
+{
+ if (at24_mem_acc)
+ return at24_mem_acc->write(at24_mem_acc, buf, off, count);
+ return -ENODEV;
+}
+EXPORT_SYMBOL(dm6446evm_eeprom_write);
+
+/*
+ * MSP430 supports RTC, card detection, input from IR remote, and
+ * a bit more. It triggers interrupts on GPIO(7) from pressing
+ * buttons on the IR remote, and for card detect switches.
+ */
+static struct i2c_client *dm6446evm_msp;
+
+static int dm6446evm_msp_probe(struct i2c_client *client,
+ const struct i2c_device_id *id)
+{
+ dm6446evm_msp = client;
+ return 0;
+}
+
+static int dm6446evm_msp_remove(struct i2c_client *client)
+{
+ dm6446evm_msp = NULL;
+ return 0;
+}
+
+static const struct i2c_device_id dm6446evm_msp_ids[] = {
+ { "dm6446evm_msp", 0, },
+ { /* end of list */ },
+};
+
+static struct i2c_driver dm6446evm_msp_driver = {
+ .driver.name = "dm6446evm_msp",
+ .id_table = dm6446evm_msp_ids,
+ .probe = dm6446evm_msp_probe,
+ .remove = dm6446evm_msp_remove,
+};
+
+static int dm6444evm_msp430_get_pins(void)
+{
+ static const char txbuf[2] = { 2, 4, };
+ char buf[4];
+ struct i2c_msg msg[2] = {
+ {
+ .addr = dm6446evm_msp->addr,
+ .flags = 0,
+ .len = 2,
+ .buf = (void __force *)txbuf,
+ },
+ {
+ .addr = dm6446evm_msp->addr,
+ .flags = I2C_M_RD,
+ .len = 4,
+ .buf = buf,
+ },
+ };
+ int status;
+
+ if (!dm6446evm_msp)
+ return -ENXIO;
+
+ /* Command 4 == get input state, returns port 2 and port3 data
+ * S Addr W [A] len=2 [A] cmd=4 [A]
+ * RS Addr R [A] [len=4] A [cmd=4] A [port2] A [port3] N P
+ */
+ status = i2c_transfer(dm6446evm_msp->adapter, msg, 2);
+ if (status < 0)
+ return status;
+
+ dev_dbg(&dm6446evm_msp->dev,
+ "PINS: %02x %02x %02x %02x\n",
+ buf[0], buf[1], buf[2], buf[3]);
+
+ return (buf[3] << 8) | buf[2];
+}
+
static struct i2c_board_info __initdata i2c_info[] = {
{
+ I2C_BOARD_INFO("dm6446evm_msp", 0x23),
+ },
+ {
I2C_BOARD_INFO("pcf8574", 0x38),
.platform_data = &pcf_data_u2,
},
@@ -368,7 +567,6 @@ static struct i2c_board_info __initdata i2c_info[] = {
},
/* ALSO:
* - tvl320aic33 audio codec (0x1b)
- * - msp430 microcontroller (0x23)
* - tvp5146 video decoder (0x5d)
*/
};
@@ -384,51 +582,109 @@ static struct davinci_i2c_platform_data i2c_pdata = {
static void __init evm_init_i2c(void)
{
davinci_init_i2c(&i2c_pdata);
+ i2c_add_driver(&dm6446evm_msp_driver);
i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
}
static struct platform_device *davinci_evm_devices[] __initdata = {
-#if defined(CONFIG_MTD_PHYSMAP) || \
- defined(CONFIG_MTD_PHYSMAP_MODULE)
- &davinci_evm_norflash_device,
-#endif
-#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
- defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
- &ide_dev,
-#endif
+ &davinci_fb_device,
+ &rtc_dev,
+};
+
+static struct davinci_uart_config uart_config __initdata = {
+ .enabled_uarts = (1 << 0),
};
static void __init
davinci_evm_map_io(void)
{
davinci_map_common_io();
+ dm644x_init();
}
-static __init void davinci_evm_init(void)
+static int davinci_phy_fixup(struct phy_device *phydev)
{
- davinci_psc_init();
+ unsigned int control;
+ /* CRITICAL: Fix for increasing PHY signal drive strength for
+ * TX lockup issue. On DaVinci EVM, the Intel LXT971 PHY
+ * signal strength was low causing TX to fail randomly. The
+ * fix is to Set bit 11 (Increased MII drive strength) of PHY
+ * register 26 (Digital Config register) on this phy. */
+ control = phy_read(phydev, 26);
+ phy_write(phydev, 26, (control | 0x800));
+ return 0;
+}
#if defined(CONFIG_BLK_DEV_PALMCHIP_BK3710) || \
defined(CONFIG_BLK_DEV_PALMCHIP_BK3710_MODULE)
+#define HAS_ATA 1
+#else
+#define HAS_ATA 0
+#endif
+
#if defined(CONFIG_MTD_PHYSMAP) || \
defined(CONFIG_MTD_PHYSMAP_MODULE)
- printk(KERN_WARNING "WARNING: both IDE and NOR flash are enabled, "
- "but share pins.\n\t Disable IDE for NOR support.\n");
+#define HAS_NOR 1
+#else
+#define HAS_NOR 0
#endif
+
+#if defined(CONFIG_MTD_NAND_DAVINCI) || \
+ defined(CONFIG_MTD_NAND_DAVINCI_MODULE)
+#define HAS_NAND 1
+#else
+#define HAS_NAND 0
#endif
+static __init void davinci_evm_init(void)
+{
+ struct clk *aemif_clk;
+
+ aemif_clk = clk_get(NULL, "aemif");
+ clk_enable(aemif_clk);
+
+ if (HAS_ATA) {
+ if (HAS_NAND || HAS_NOR)
+ pr_warning("WARNING: both IDE and Flash are "
+ "enabled, but they share AEMIF pins.\n"
+ "\tDisable IDE for NAND/NOR support.\n");
+ davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+ davinci_cfg_reg(DM644X_ATAEN);
+ davinci_cfg_reg(DM644X_HDIREN);
+ platform_device_register(&ide_dev);
+ } else if (HAS_NAND || HAS_NOR) {
+ davinci_cfg_reg(DM644X_HPIEN_DISABLE);
+ davinci_cfg_reg(DM644X_ATAEN_DISABLE);
+
+ /* only one device will be jumpered and detected */
+ if (HAS_NAND) {
+ platform_device_register(&davinci_evm_nandflash_device);
+ evm_leds[7].default_trigger = "nand-disk";
+ if (HAS_NOR)
+ pr_warning("WARNING: both NAND and NOR flash "
+ "are enabled; disable one of them.\n");
+ } else if (HAS_NOR)
+ platform_device_register(&davinci_evm_norflash_device);
+ }
+
platform_add_devices(davinci_evm_devices,
ARRAY_SIZE(davinci_evm_devices));
evm_init_i2c();
+
+ davinci_serial_init(&uart_config);
+
+ /* Register the fixup for PHY on DaVinci */
+ phy_register_fixup_for_uid(LXT971_PHY_ID, LXT971_PHY_MASK,
+ davinci_phy_fixup);
+
}
static __init void davinci_evm_irq_init(void)
{
- davinci_init_common_hw();
davinci_irq_init();
}
-MACHINE_START(DAVINCI_EVM, "DaVinci EVM")
+MACHINE_START(DAVINCI_EVM, "DaVinci DM644x EVM")
/* Maintainer: MontaVista Software <source@mvista.com> */
.phys_io = IO_PHYS,
.io_pg_offst = (__IO_ADDRESS(IO_PHYS) >> 18) & 0xfffc,
diff --git a/arch/arm/mach-davinci/clock.c b/arch/arm/mach-davinci/clock.c
index abb92b7eca0..f0baaa15a57 100644
--- a/arch/arm/mach-davinci/clock.c
+++ b/arch/arm/mach-davinci/clock.c
@@ -1,7 +1,8 @@
/*
- * TI DaVinci clock config file
+ * Clock and PLL control for DaVinci devices
*
- * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2006-2007 Texas Instruments.
+ * Copyright (C) 2008-2009 Deep Root Systems, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -13,6 +14,7 @@
#include <linux/kernel.h>
#include <linux/init.h>
#include <linux/errno.h>
+#include <linux/clk.h>
#include <linux/err.h>
#include <linux/mutex.h>
#include <linux/platform_device.h>
@@ -21,98 +23,50 @@
#include <mach/hardware.h>
#include <mach/psc.h>
+#include <mach/cputype.h>
#include "clock.h"
-/* PLL/Reset register offsets */
-#define PLLM 0x110
-
static LIST_HEAD(clocks);
static DEFINE_MUTEX(clocks_mutex);
static DEFINE_SPINLOCK(clockfw_lock);
-static unsigned int commonrate;
-static unsigned int armrate;
-static unsigned int fixedrate = 27000000; /* 27 MHZ */
-
-extern void davinci_psc_config(unsigned int domain, unsigned int id, char enable);
-
-/*
- * Returns a clock. Note that we first try to use device id on the bus
- * and clock name. If this fails, we try to use clock name only.
- */
-struct clk *clk_get(struct device *dev, const char *id)
+static unsigned psc_domain(struct clk *clk)
{
- struct clk *p, *clk = ERR_PTR(-ENOENT);
- int idno;
-
- if (dev == NULL || dev->bus != &platform_bus_type)
- idno = -1;
- else
- idno = to_platform_device(dev)->id;
-
- mutex_lock(&clocks_mutex);
-
- list_for_each_entry(p, &clocks, node) {
- if (p->id == idno &&
- strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
- clk = p;
- goto found;
- }
- }
-
- list_for_each_entry(p, &clocks, node) {
- if (strcmp(id, p->name) == 0 && try_module_get(p->owner)) {
- clk = p;
- break;
- }
- }
-
-found:
- mutex_unlock(&clocks_mutex);
-
- return clk;
+ return (clk->flags & PSC_DSP)
+ ? DAVINCI_GPSC_DSPDOMAIN
+ : DAVINCI_GPSC_ARMDOMAIN;
}
-EXPORT_SYMBOL(clk_get);
-void clk_put(struct clk *clk)
+static void __clk_enable(struct clk *clk)
{
- if (clk && !IS_ERR(clk))
- module_put(clk->owner);
-}
-EXPORT_SYMBOL(clk_put);
-
-static int __clk_enable(struct clk *clk)
-{
- if (clk->flags & ALWAYS_ENABLED)
- return 0;
-
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 1);
- return 0;
+ if (clk->parent)
+ __clk_enable(clk->parent);
+ if (clk->usecount++ == 0 && (clk->flags & CLK_PSC))
+ davinci_psc_config(psc_domain(clk), clk->lpsc, 1);
}
static void __clk_disable(struct clk *clk)
{
- if (clk->usecount)
+ if (WARN_ON(clk->usecount == 0))
return;
-
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, clk->lpsc, 0);
+ if (--clk->usecount == 0 && !(clk->flags & CLK_PLL))
+ davinci_psc_config(psc_domain(clk), clk->lpsc, 0);
+ if (clk->parent)
+ __clk_disable(clk->parent);
}
int clk_enable(struct clk *clk)
{
unsigned long flags;
- int ret = 0;
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
- if (clk->usecount++ == 0) {
- spin_lock_irqsave(&clockfw_lock, flags);
- ret = __clk_enable(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
- }
+ spin_lock_irqsave(&clockfw_lock, flags);
+ __clk_enable(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
- return ret;
+ return 0;
}
EXPORT_SYMBOL(clk_enable);
@@ -123,11 +77,9 @@ void clk_disable(struct clk *clk)
if (clk == NULL || IS_ERR(clk))
return;
- if (clk->usecount > 0 && !(--clk->usecount)) {
- spin_lock_irqsave(&clockfw_lock, flags);
- __clk_disable(clk);
- spin_unlock_irqrestore(&clockfw_lock, flags);
- }
+ spin_lock_irqsave(&clockfw_lock, flags);
+ __clk_disable(clk);
+ spin_unlock_irqrestore(&clockfw_lock, flags);
}
EXPORT_SYMBOL(clk_disable);
@@ -136,7 +88,7 @@ unsigned long clk_get_rate(struct clk *clk)
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
- return *(clk->rate);
+ return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
@@ -145,7 +97,7 @@ long clk_round_rate(struct clk *clk, unsigned long rate)
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
- return *(clk->rate);
+ return clk->rate;
}
EXPORT_SYMBOL(clk_round_rate);
@@ -164,10 +116,23 @@ int clk_register(struct clk *clk)
if (clk == NULL || IS_ERR(clk))
return -EINVAL;
+ if (WARN(clk->parent && !clk->parent->rate,
+ "CLK: %s parent %s has no rate!\n",
+ clk->name, clk->parent->name))
+ return -EINVAL;
+
mutex_lock(&clocks_mutex);
- list_add(&clk->node, &clocks);
+ list_add_tail(&clk->node, &clocks);
mutex_unlock(&clocks_mutex);
+ /* If rate is already set, use it */
+ if (clk->rate)
+ return 0;
+
+ /* Otherwise, default to parent rate */
+ if (clk->parent)
+ clk->rate = clk->parent->rate;
+
return 0;
}
EXPORT_SYMBOL(clk_register);
@@ -183,84 +148,150 @@ void clk_unregister(struct clk *clk)
}
EXPORT_SYMBOL(clk_unregister);
-static struct clk davinci_clks[] = {
- {
- .name = "ARMCLK",
- .rate = &armrate,
- .lpsc = -1,
- .flags = ALWAYS_ENABLED,
- },
- {
- .name = "UART",
- .rate = &fixedrate,
- .lpsc = DAVINCI_LPSC_UART0,
- },
- {
- .name = "EMACCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
- },
- {
- .name = "I2CCLK",
- .rate = &fixedrate,
- .lpsc = DAVINCI_LPSC_I2C,
- },
- {
- .name = "IDECLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_ATA,
- },
- {
- .name = "McBSPCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_McBSP,
- },
- {
- .name = "MMCSDCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_MMC_SD,
- },
- {
- .name = "SPICLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_SPI,
- },
- {
- .name = "gpio",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_GPIO,
- },
- {
- .name = "usb",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_USB,
- },
- {
- .name = "AEMIFCLK",
- .rate = &commonrate,
- .lpsc = DAVINCI_LPSC_AEMIF,
- .usecount = 1,
+#ifdef CONFIG_DAVINCI_RESET_CLOCKS
+/*
+ * Disable any unused clocks left on by the bootloader
+ */
+static int __init clk_disable_unused(void)
+{
+ struct clk *ck;
+
+ spin_lock_irq(&clockfw_lock);
+ list_for_each_entry(ck, &clocks, node) {
+ if (ck->usecount > 0)
+ continue;
+ if (!(ck->flags & CLK_PSC))
+ continue;
+
+ /* ignore if in Disabled or SwRstDisable states */
+ if (!davinci_psc_is_clk_active(ck->lpsc))
+ continue;
+
+ pr_info("Clocks: disable unused %s\n", ck->name);
+ davinci_psc_config(psc_domain(ck), ck->lpsc, 0);
}
-};
+ spin_unlock_irq(&clockfw_lock);
+
+ return 0;
+}
+late_initcall(clk_disable_unused);
+#endif
-int __init davinci_clk_init(void)
+static void clk_sysclk_recalc(struct clk *clk)
{
- struct clk *clkp;
- int count = 0;
- u32 pll_mult;
-
- pll_mult = davinci_readl(DAVINCI_PLL_CNTRL0_BASE + PLLM);
- commonrate = ((pll_mult + 1) * 27000000) / 6;
- armrate = ((pll_mult + 1) * 27000000) / 2;
-
- for (clkp = davinci_clks; count < ARRAY_SIZE(davinci_clks);
- count++, clkp++) {
- clk_register(clkp);
-
- /* Turn on clocks that have been enabled in the
- * table above */
- if (clkp->usecount)
- clk_enable(clkp);
+ u32 v, plldiv;
+ struct pll_data *pll;
+
+ /* If this is the PLL base clock, no more calculations needed */
+ if (clk->pll_data)
+ return;
+
+ if (WARN_ON(!clk->parent))
+ return;
+
+ clk->rate = clk->parent->rate;
+
+ /* Otherwise, the parent must be a PLL */
+ if (WARN_ON(!clk->parent->pll_data))
+ return;
+
+ pll = clk->parent->pll_data;
+
+ /* If pre-PLL, source clock is before the multiplier and divider(s) */
+ if (clk->flags & PRE_PLL)
+ clk->rate = pll->input_rate;
+
+ if (!clk->div_reg)
+ return;
+
+ v = __raw_readl(pll->base + clk->div_reg);
+ if (v & PLLDIV_EN) {
+ plldiv = (v & PLLDIV_RATIO_MASK) + 1;
+ if (plldiv)
+ clk->rate /= plldiv;
+ }
+}
+
+static void __init clk_pll_init(struct clk *clk)
+{
+ u32 ctrl, mult = 1, prediv = 1, postdiv = 1;
+ u8 bypass;
+ struct pll_data *pll = clk->pll_data;
+
+ pll->base = IO_ADDRESS(pll->phys_base);
+ ctrl = __raw_readl(pll->base + PLLCTL);
+ clk->rate = pll->input_rate = clk->parent->rate;
+
+ if (ctrl & PLLCTL_PLLEN) {
+ bypass = 0;
+ mult = __raw_readl(pll->base + PLLM);
+ mult = (mult & PLLM_PLLM_MASK) + 1;
+ } else
+ bypass = 1;
+
+ if (pll->flags & PLL_HAS_PREDIV) {
+ prediv = __raw_readl(pll->base + PREDIV);
+ if (prediv & PLLDIV_EN)
+ prediv = (prediv & PLLDIV_RATIO_MASK) + 1;
+ else
+ prediv = 1;
+ }
+
+ /* pre-divider is fixed, but (some?) chips won't report that */
+ if (cpu_is_davinci_dm355() && pll->num == 1)
+ prediv = 8;
+
+ if (pll->flags & PLL_HAS_POSTDIV) {
+ postdiv = __raw_readl(pll->base + POSTDIV);
+ if (postdiv & PLLDIV_EN)
+ postdiv = (postdiv & PLLDIV_RATIO_MASK) + 1;
+ else
+ postdiv = 1;
+ }
+
+ if (!bypass) {
+ clk->rate /= prediv;
+ clk->rate *= mult;
+ clk->rate /= postdiv;
+ }
+
+ pr_debug("PLL%d: input = %lu MHz [ ",
+ pll->num, clk->parent->rate / 1000000);
+ if (bypass)
+ pr_debug("bypass ");
+ if (prediv > 1)
+ pr_debug("/ %d ", prediv);
+ if (mult > 1)
+ pr_debug("* %d ", mult);
+ if (postdiv > 1)
+ pr_debug("/ %d ", postdiv);
+ pr_debug("] --> %lu MHz output.\n", clk->rate / 1000000);
+}
+
+int __init davinci_clk_init(struct davinci_clk *clocks)
+ {
+ struct davinci_clk *c;
+ struct clk *clk;
+
+ for (c = clocks; c->lk.clk; c++) {
+ clk = c->lk.clk;
+
+ if (clk->pll_data)
+ clk_pll_init(clk);
+
+ /* Calculate rates for PLL-derived clocks */
+ else if (clk->flags & CLK_PLL)
+ clk_sysclk_recalc(clk);
+
+ if (clk->lpsc)
+ clk->flags |= CLK_PSC;
+
+ clkdev_add(&c->lk);
+ clk_register(clk);
+
+ /* Turn on clocks that Linux doesn't otherwise manage */
+ if (clk->flags & ALWAYS_ENABLED)
+ clk_enable(clk);
}
return 0;
@@ -285,12 +316,52 @@ static void davinci_ck_stop(struct seq_file *m, void *v)
{
}
-static int davinci_ck_show(struct seq_file *m, void *v)
+#define CLKNAME_MAX 10 /* longest clock name */
+#define NEST_DELTA 2
+#define NEST_MAX 4
+
+static void
+dump_clock(struct seq_file *s, unsigned nest, struct clk *parent)
{
- struct clk *cp;
+ char *state;
+ char buf[CLKNAME_MAX + NEST_DELTA * NEST_MAX];
+ struct clk *clk;
+ unsigned i;
+
+ if (parent->flags & CLK_PLL)
+ state = "pll";
+ else if (parent->flags & CLK_PSC)
+ state = "psc";
+ else
+ state = "";
+
+ /* <nest spaces> name <pad to end> */
+ memset(buf, ' ', sizeof(buf) - 1);
+ buf[sizeof(buf) - 1] = 0;
+ i = strlen(parent->name);
+ memcpy(buf + nest, parent->name,
+ min(i, (unsigned)(sizeof(buf) - 1 - nest)));
+
+ seq_printf(s, "%s users=%2d %-3s %9ld Hz\n",
+ buf, parent->usecount, state, clk_get_rate(parent));
+ /* REVISIT show device associations too */
+
+ /* cost is now small, but not linear... */
+ list_for_each_entry(clk, &clocks, node) {
+ if (clk->parent == parent)
+ dump_clock(s, nest + NEST_DELTA, clk);
+ }
+}
- list_for_each_entry(cp, &clocks, node)
- seq_printf(m,"%s %d %d\n", cp->name, *(cp->rate), cp->usecount);
+static int davinci_ck_show(struct seq_file *m, void *v)
+{
+ /* Show clock tree; we know the main oscillator is first.
+ * We trust nonzero usecounts equate to PSC enables...
+ */
+ mutex_lock(&clocks_mutex);
+ if (!list_empty(&clocks))
+ dump_clock(m, 0, list_first_entry(&clocks, struct clk, node));
+ mutex_unlock(&clocks_mutex);
return 0;
}
@@ -321,4 +392,4 @@ static int __init davinci_ck_proc_init(void)
}
__initcall(davinci_ck_proc_init);
-#endif /* CONFIG_DEBUG_PROC_FS */
+#endif /* CONFIG_DEBUG_PROC_FS */
diff --git a/arch/arm/mach-davinci/clock.h b/arch/arm/mach-davinci/clock.h
index ed47079a52e..35736ec202f 100644
--- a/arch/arm/mach-davinci/clock.h
+++ b/arch/arm/mach-davinci/clock.h
@@ -1,7 +1,8 @@
/*
* TI DaVinci clock definitions
*
- * Copyright (C) 2006 Texas Instruments.
+ * Copyright (C) 2006-2007 Texas Instruments.
+ * Copyright (C) 2008-2009 Deep Root Systems, LLC
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License version 2 as
@@ -11,23 +12,85 @@
#ifndef __ARCH_ARM_DAVINCI_CLOCK_H
#define __ARCH_ARM_DAVINCI_CLOCK_H
+#include <linux/list.h>
+#include <asm/clkdev.h>
+
+#define DAVINCI_PLL1_BASE 0x01c40800
+#define DAVINCI_PLL2_BASE 0x01c40c00
+#define MAX_PLL 2
+
+/* PLL/Reset register offsets */
+#define PLLCTL 0x100
+#define PLLCTL_PLLEN BIT(0)
+#define PLLCTL_CLKMODE BIT(8)
+
+#define PLLM 0x110
+#define PLLM_PLLM_MASK 0xff
+
+#define PREDIV 0x114
+#define PLLDIV1 0x118
+#define PLLDIV2 0x11c
+#define PLLDIV3 0x120
+#define POSTDIV 0x128
+#define BPDIV 0x12c
+#define PLLCMD 0x138
+#define PLLSTAT 0x13c
+#define PLLALNCTL 0x140
+#define PLLDCHANGE 0x144
+#define PLLCKEN 0x148
+#define PLLCKSTAT 0x14c
+#define PLLSYSTAT 0x150
+#define PLLDIV4 0x160
+#define PLLDIV5 0x164
+#define PLLDIV6 0x168
+#define PLLDIV7 0x16c
+#define PLLDIV8 0x170
+#define PLLDIV9 0x174
+#define PLLDIV_EN BIT(15)
+#define PLLDIV_RATIO_MASK 0x1f
+
+struct pll_data {
+ u32 phys_base;
+ void __iomem *base;
+ u32 num;
+ u32 flags;
+ u32 input_rate;
+};
+#define PLL_HAS_PREDIV 0x01
+#define PLL_HAS_POSTDIV 0x02
+
struct clk {
struct list_head node;
struct module *owner;
const char *name;
- unsigned int *rate;
- int id;
- __s8 usecount;
- __u8 flags;
- __u8 lpsc;
+ unsigned long rate;
+ u8 usecount;
+ u8 flags;
+ u8 lpsc;
+ struct clk *parent;
+ struct pll_data *pll_data;
+ u32 div_reg;
};
/* Clock flags */
-#define RATE_CKCTL 1
-#define RATE_FIXED 2
-#define RATE_PROPAGATES 4
-#define VIRTUAL_CLOCK 8
-#define ALWAYS_ENABLED 16
-#define ENABLE_REG_32BIT 32
+#define ALWAYS_ENABLED BIT(1)
+#define CLK_PSC BIT(2)
+#define PSC_DSP BIT(3) /* PSC uses DSP domain, not ARM */
+#define CLK_PLL BIT(4) /* PLL-derived clock */
+#define PRE_PLL BIT(5) /* source is before PLL mult/div */
+
+struct davinci_clk {
+ struct clk_lookup lk;
+};
+
+#define CLK(dev, con, ck) \
+ { \
+ .lk = { \
+ .dev_id = dev, \
+ .con_id = con, \
+ .clk = ck, \
+ }, \
+ }
+int davinci_clk_init(struct davinci_clk *clocks);
#endif
diff --git a/arch/arm/mach-davinci/devices.c b/arch/arm/mach-davinci/devices.c
index 808633f9f03..a31370b93dd 100644
--- a/arch/arm/mach-davinci/devices.c
+++ b/arch/arm/mach-davinci/devices.c
@@ -21,6 +21,10 @@
#include <mach/hardware.h>
#include <mach/i2c.h>
#include <mach/irqs.h>
+#include <mach/cputype.h>
+#include <mach/mux.h>
+
+#define DAVINCI_I2C_BASE 0x01C21000
static struct resource i2c_resources[] = {
{
@@ -43,6 +47,9 @@ static struct platform_device davinci_i2c_device = {
void __init davinci_init_i2c(struct davinci_i2c_platform_data *pdata)
{
+ if (cpu_is_davinci_dm644x())
+ davinci_cfg_reg(DM644X_I2C);
+
davinci_i2c_device.dev.platform_data = pdata;
(void) platform_device_register(&davinci_i2c_device);
}
diff --git a/arch/arm/mach-davinci/dm644x.c b/arch/arm/mach-davinci/dm644x.c
new file mode 100644
index 00000000000..d428ef192ea
--- /dev/null
+++ b/arch/arm/mach-davinci/dm644x.c
@@ -0,0 +1,461 @@
+/*
+ * TI DaVinci DM644x chip specific setup
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/platform_device.h>
+
+#include <mach/dm644x.h>
+#include <mach/clock.h>
+#include <mach/cputype.h>
+#include <mach/edma.h>
+#include <mach/irqs.h>
+#include <mach/psc.h>
+#include <mach/mux.h>
+
+#include "clock.h"
+#include "mux.h"
+
+/*
+ * Device specific clocks
+ */
+#define DM644X_REF_FREQ 27000000
+
+static struct pll_data pll1_data = {
+ .num = 1,
+ .phys_base = DAVINCI_PLL1_BASE,
+};
+
+static struct pll_data pll2_data = {
+ .num = 2,
+ .phys_base = DAVINCI_PLL2_BASE,
+};
+
+static struct clk ref_clk = {
+ .name = "ref_clk",
+ .rate = DM644X_REF_FREQ,
+};
+
+static struct clk pll1_clk = {
+ .name = "pll1",
+ .parent = &ref_clk,
+ .pll_data = &pll1_data,
+ .flags = CLK_PLL,
+};
+
+static struct clk pll1_sysclk1 = {
+ .name = "pll1_sysclk1",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll1_sysclk2 = {
+ .name = "pll1_sysclk2",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV2,
+};
+
+static struct clk pll1_sysclk3 = {
+ .name = "pll1_sysclk3",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV3,
+};
+
+static struct clk pll1_sysclk5 = {
+ .name = "pll1_sysclk5",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV5,
+};
+
+static struct clk pll1_aux_clk = {
+ .name = "pll1_aux_clk",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+};
+
+static struct clk pll1_sysclkbp = {
+ .name = "pll1_sysclkbp",
+ .parent = &pll1_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV
+};
+
+static struct clk pll2_clk = {
+ .name = "pll2",
+ .parent = &ref_clk,
+ .pll_data = &pll2_data,
+ .flags = CLK_PLL,
+};
+
+static struct clk pll2_sysclk1 = {
+ .name = "pll2_sysclk1",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV1,
+};
+
+static struct clk pll2_sysclk2 = {
+ .name = "pll2_sysclk2",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL,
+ .div_reg = PLLDIV2,
+};
+
+static struct clk pll2_sysclkbp = {
+ .name = "pll2_sysclkbp",
+ .parent = &pll2_clk,
+ .flags = CLK_PLL | PRE_PLL,
+ .div_reg = BPDIV
+};
+
+static struct clk dsp_clk = {
+ .name = "dsp",
+ .parent = &pll1_sysclk1,
+ .lpsc = DAVINCI_LPSC_GEM,
+ .flags = PSC_DSP,
+ .usecount = 1, /* REVISIT how to disable? */
+};
+
+static struct clk arm_clk = {
+ .name = "arm",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_ARM,
+ .flags = ALWAYS_ENABLED,
+};
+
+static struct clk vicp_clk = {
+ .name = "vicp",
+ .parent = &pll1_sysclk2,
+ .lpsc = DAVINCI_LPSC_IMCOP,
+ .flags = PSC_DSP,
+ .usecount = 1, /* REVISIT how to disable? */
+};
+
+static struct clk vpss_master_clk = {
+ .name = "vpss_master",
+ .parent = &pll1_sysclk3,
+ .lpsc = DAVINCI_LPSC_VPSSMSTR,
+ .flags = CLK_PSC,
+};
+
+static struct clk vpss_slave_clk = {
+ .name = "vpss_slave",
+ .parent = &pll1_sysclk3,
+ .lpsc = DAVINCI_LPSC_VPSSSLV,
+};
+
+static struct clk uart0_clk = {
+ .name = "uart0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART0,
+};
+
+static struct clk uart1_clk = {
+ .name = "uart1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART1,
+};
+
+static struct clk uart2_clk = {
+ .name = "uart2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_UART2,
+};
+
+static struct clk emac_clk = {
+ .name = "emac",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_EMAC_WRAPPER,
+};
+
+static struct clk i2c_clk = {
+ .name = "i2c",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_I2C,
+};
+
+static struct clk ide_clk = {
+ .name = "ide",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_ATA,
+};
+
+static struct clk asp_clk = {
+ .name = "asp0",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_McBSP,
+};
+
+static struct clk mmcsd_clk = {
+ .name = "mmcsd",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_MMC_SD,
+};
+
+static struct clk spi_clk = {
+ .name = "spi",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_SPI,
+};
+
+static struct clk gpio_clk = {
+ .name = "gpio",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_GPIO,
+};
+
+static struct clk usb_clk = {
+ .name = "usb",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_USB,
+};
+
+static struct clk vlynq_clk = {
+ .name = "vlynq",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_VLYNQ,
+};
+
+static struct clk aemif_clk = {
+ .name = "aemif",
+ .parent = &pll1_sysclk5,
+ .lpsc = DAVINCI_LPSC_AEMIF,
+};
+
+static struct clk pwm0_clk = {
+ .name = "pwm0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM0,
+};
+
+static struct clk pwm1_clk = {
+ .name = "pwm1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM1,
+};
+
+static struct clk pwm2_clk = {
+ .name = "pwm2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_PWM2,
+};
+
+static struct clk timer0_clk = {
+ .name = "timer0",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER0,
+};
+
+static struct clk timer1_clk = {
+ .name = "timer1",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER1,
+};
+
+static struct clk timer2_clk = {
+ .name = "timer2",
+ .parent = &pll1_aux_clk,
+ .lpsc = DAVINCI_LPSC_TIMER2,
+ .usecount = 1, /* REVISIT: why cant' this be disabled? */
+};
+
+struct davinci_clk dm644x_clks[] = {
+ CLK(NULL, "ref", &ref_clk),
+ CLK(NULL, "pll1", &pll1_clk),
+ CLK(NULL, "pll1_sysclk1", &pll1_sysclk1),
+ CLK(NULL, "pll1_sysclk2", &pll1_sysclk2),
+ CLK(NULL, "pll1_sysclk3", &pll1_sysclk3),
+ CLK(NULL, "pll1_sysclk5", &pll1_sysclk5),
+ CLK(NULL, "pll1_aux", &pll1_aux_clk),
+ CLK(NULL, "pll1_sysclkbp", &pll1_sysclkbp),
+ CLK(NULL, "pll2", &pll2_clk),
+ CLK(NULL, "pll2_sysclk1", &pll2_sysclk1),
+ CLK(NULL, "pll2_sysclk2", &pll2_sysclk2),
+ CLK(NULL, "pll2_sysclkbp", &pll2_sysclkbp),
+ CLK(NULL, "dsp", &dsp_clk),
+ CLK(NULL, "arm", &arm_clk),
+ CLK(NULL, "vicp", &vicp_clk),
+ CLK(NULL, "vpss_master", &vpss_master_clk),
+ CLK(NULL, "vpss_slave", &vpss_slave_clk),
+ CLK(NULL, "arm", &arm_clk),
+ CLK(NULL, "uart0", &uart0_clk),
+ CLK(NULL, "uart1", &uart1_clk),
+ CLK(NULL, "uart2", &uart2_clk),
+ CLK("davinci_emac.1", NULL, &emac_clk),
+ CLK("i2c_davinci.1", NULL, &i2c_clk),
+ CLK("palm_bk3710", NULL, &ide_clk),
+ CLK("soc-audio.0", NULL, &asp_clk),
+ CLK("davinci_mmc.0", NULL, &mmcsd_clk),
+ CLK(NULL, "spi", &spi_clk),
+ CLK(NULL, "gpio", &gpio_clk),
+ CLK(NULL, "usb", &usb_clk),
+ CLK(NULL, "vlynq", &vlynq_clk),
+ CLK(NULL, "aemif", &aemif_clk),
+ CLK(NULL, "pwm0", &pwm0_clk),
+ CLK(NULL, "pwm1", &pwm1_clk),
+ CLK(NULL, "pwm2", &pwm2_clk),
+ CLK(NULL, "timer0", &timer0_clk),
+ CLK(NULL, "timer1", &timer1_clk),
+ CLK("watchdog", NULL, &timer2_clk),
+ CLK(NULL, NULL, NULL),
+};
+
+#if defined(CONFIG_TI_DAVINCI_EMAC) || defined(CONFIG_TI_DAVINCI_EMAC_MODULE)
+
+static struct resource dm644x_emac_resources[] = {
+ {
+ .start = DM644X_EMAC_BASE,
+ .end = DM644X_EMAC_BASE + 0x47ff,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_EMACINT,
+ .end = IRQ_EMACINT,
+ .flags = IORESOURCE_IRQ,
+ },
+};
+
+static struct platform_device dm644x_emac_device = {
+ .name = "davinci_emac",
+ .id = 1,
+ .num_resources = ARRAY_SIZE(dm644x_emac_resources),
+ .resource = dm644x_emac_resources,
+};
+
+#endif
+
+/*
+ * Device specific mux setup
+ *
+ * soc description mux mode mode mux dbg
+ * reg offset mask mode
+ */
+static const struct mux_config dm644x_pins[] = {
+MUX_CFG(DM644X, HDIREN, 0, 16, 1, 1, true)
+MUX_CFG(DM644X, ATAEN, 0, 17, 1, 1, true)
+MUX_CFG(DM644X, ATAEN_DISABLE, 0, 17, 1, 0, true)
+
+MUX_CFG(DM644X, HPIEN_DISABLE, 0, 29, 1, 0, true)
+
+MUX_CFG(DM644X, AEAW, 0, 0, 31, 31, true)
+
+MUX_CFG(DM644X, MSTK, 1, 9, 1, 0, false)
+
+MUX_CFG(DM644X, I2C, 1, 7, 1, 1, false)
+
+MUX_CFG(DM644X, MCBSP, 1, 10, 1, 1, false)
+
+MUX_CFG(DM644X, UART1, 1, 1, 1, 1, true)
+MUX_CFG(DM644X, UART2, 1, 2, 1, 1, true)
+
+MUX_CFG(DM644X, PWM0, 1, 4, 1, 1, false)
+
+MUX_CFG(DM644X, PWM1, 1, 5, 1, 1, false)
+
+MUX_CFG(DM644X, PWM2, 1, 6, 1, 1, false)
+
+MUX_CFG(DM644X, VLYNQEN, 0, 15, 1, 1, false)
+MUX_CFG(DM644X, VLSCREN, 0, 14, 1, 1, false)
+MUX_CFG(DM644X, VLYNQWD, 0, 12, 3, 3, false)
+
+MUX_CFG(DM644X, EMACEN, 0, 31, 1, 1, true)
+
+MUX_CFG(DM644X, GPIO3V, 0, 31, 1, 0, true)
+
+MUX_CFG(DM644X, GPIO0, 0, 24, 1, 0, true)
+MUX_CFG(DM644X, GPIO3, 0, 25, 1, 0, false)
+MUX_CFG(DM644X, GPIO43_44, 1, 7, 1, 0, false)
+MUX_CFG(DM644X, GPIO46_47, 0, 22, 1, 0, true)
+
+MUX_CFG(DM644X, RGB666, 0, 22, 1, 1, true)
+
+MUX_CFG(DM644X, LOEEN, 0, 24, 1, 1, true)
+MUX_CFG(DM644X, LFLDEN, 0, 25, 1, 1, false)
+};
+
+
+/*----------------------------------------------------------------------*/
+
+static const s8 dma_chan_dm644x_no_event[] = {
+ 0, 1, 12, 13, 14,
+ 15, 25, 30, 31, 45,
+ 46, 47, 55, 56, 57,
+ 58, 59, 60, 61, 62,
+ 63,
+ -1
+};
+
+static struct edma_soc_info dm644x_edma_info = {
+ .n_channel = 64,
+ .n_region = 4,
+ .n_slot = 128,
+ .n_tc = 2,
+ .noevent = dma_chan_dm644x_no_event,
+};
+
+static struct resource edma_resources[] = {
+ {
+ .name = "edma_cc",
+ .start = 0x01c00000,
+ .end = 0x01c00000 + SZ_64K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc0",
+ .start = 0x01c10000,
+ .end = 0x01c10000 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .name = "edma_tc1",
+ .start = 0x01c10400,
+ .end = 0x01c10400 + SZ_1K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+ {
+ .start = IRQ_CCINT0,
+ .flags = IORESOURCE_IRQ,
+ },
+ {
+ .start = IRQ_CCERRINT,
+ .flags = IORESOURCE_IRQ,
+ },
+ /* not using TC*_ERR */
+};
+
+static struct platform_device dm644x_edma_device = {
+ .name = "edma",
+ .id = -1,
+ .dev.platform_data = &dm644x_edma_info,
+ .num_resources = ARRAY_SIZE(edma_resources),
+ .resource = edma_resources,
+};
+
+/*----------------------------------------------------------------------*/
+void __init dm644x_init(void)
+{
+ davinci_clk_init(dm644x_clks);
+ davinci_mux_register(dm644x_pins, ARRAY_SIZE(dm644x_pins));
+}
+
+static int __init dm644x_init_devices(void)
+{
+ if (!cpu_is_davinci_dm644x())
+ return 0;
+
+ platform_device_register(&dm644x_edma_device);
+ return 0;
+}
+postcore_initcall(dm644x_init_devices);
diff --git a/arch/arm/mach-davinci/dma.c b/arch/arm/mach-davinci/dma.c
new file mode 100644
index 00000000000..15e9eb158bb
--- /dev/null
+++ b/arch/arm/mach-davinci/dma.c
@@ -0,0 +1,1135 @@
+/*
+ * EDMA3 support for DaVinci
+ *
+ * Copyright (C) 2006-2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+#include <linux/kernel.h>
+#include <linux/sched.h>
+#include <linux/init.h>
+#include <linux/module.h>
+#include <linux/interrupt.h>
+#include <linux/platform_device.h>
+#include <linux/spinlock.h>
+#include <linux/compiler.h>
+#include <linux/io.h>
+
+#include <mach/cputype.h>
+#include <mach/memory.h>
+#include <mach/hardware.h>
+#include <mach/irqs.h>
+#include <mach/edma.h>
+#include <mach/mux.h>
+
+
+/* Offsets matching "struct edmacc_param" */
+#define PARM_OPT 0x00
+#define PARM_SRC 0x04
+#define PARM_A_B_CNT 0x08
+#define PARM_DST 0x0c
+#define PARM_SRC_DST_BIDX 0x10
+#define PARM_LINK_BCNTRLD 0x14
+#define PARM_SRC_DST_CIDX 0x18
+#define PARM_CCNT 0x1c
+
+#define PARM_SIZE 0x20
+
+/* Offsets for EDMA CC global channel registers and their shadows */
+#define SH_ER 0x00 /* 64 bits */
+#define SH_ECR 0x08 /* 64 bits */
+#define SH_ESR 0x10 /* 64 bits */
+#define SH_CER 0x18 /* 64 bits */
+#define SH_EER 0x20 /* 64 bits */
+#define SH_EECR 0x28 /* 64 bits */
+#define SH_EESR 0x30 /* 64 bits */
+#define SH_SER 0x38 /* 64 bits */
+#define SH_SECR 0x40 /* 64 bits */
+#define SH_IER 0x50 /* 64 bits */
+#define SH_IECR 0x58 /* 64 bits */
+#define SH_IESR 0x60 /* 64 bits */
+#define SH_IPR 0x68 /* 64 bits */
+#define SH_ICR 0x70 /* 64 bits */
+#define SH_IEVAL 0x78
+#define SH_QER 0x80
+#define SH_QEER 0x84
+#define SH_QEECR 0x88
+#define SH_QEESR 0x8c
+#define SH_QSER 0x90
+#define SH_QSECR 0x94
+#define SH_SIZE 0x200
+
+/* Offsets for EDMA CC global registers */
+#define EDMA_REV 0x0000
+#define EDMA_CCCFG 0x0004
+#define EDMA_QCHMAP 0x0200 /* 8 registers */
+#define EDMA_DMAQNUM 0x0240 /* 8 registers (4 on OMAP-L1xx) */
+#define EDMA_QDMAQNUM 0x0260
+#define EDMA_QUETCMAP 0x0280
+#define EDMA_QUEPRI 0x0284
+#define EDMA_EMR 0x0300 /* 64 bits */
+#define EDMA_EMCR 0x0308 /* 64 bits */
+#define EDMA_QEMR 0x0310
+#define EDMA_QEMCR 0x0314
+#define EDMA_CCERR 0x0318
+#define EDMA_CCERRCLR 0x031c
+#define EDMA_EEVAL 0x0320
+#define EDMA_DRAE 0x0340 /* 4 x 64 bits*/
+#define EDMA_QRAE 0x0380 /* 4 registers */
+#define EDMA_QUEEVTENTRY 0x0400 /* 2 x 16 registers */
+#define EDMA_QSTAT 0x0600 /* 2 registers */
+#define EDMA_QWMTHRA 0x0620
+#define EDMA_QWMTHRB 0x0624
+#define EDMA_CCSTAT 0x0640
+
+#define EDMA_M 0x1000 /* global channel registers */
+#define EDMA_ECR 0x1008
+#define EDMA_ECRH 0x100C
+#define EDMA_SHADOW0 0x2000 /* 4 regions shadowing global channels */
+#define EDMA_PARM 0x4000 /* 128 param entries */
+
+#define DAVINCI_DMA_3PCC_BASE 0x01C00000
+
+#define PARM_OFFSET(param_no) (EDMA_PARM + ((param_no) << 5))
+
+#define EDMA_MAX_DMACH 64
+#define EDMA_MAX_PARAMENTRY 512
+#define EDMA_MAX_EVQUE 2 /* FIXME too small */
+
+
+/*****************************************************************************/
+
+static void __iomem *edmacc_regs_base;
+
+static inline unsigned int edma_read(int offset)
+{
+ return (unsigned int)__raw_readl(edmacc_regs_base + offset);
+}
+
+static inline void edma_write(int offset, int val)
+{
+ __raw_writel(val, edmacc_regs_base + offset);
+}
+static inline void edma_modify(int offset, unsigned and, unsigned or)
+{
+ unsigned val = edma_read(offset);
+ val &= and;
+ val |= or;
+ edma_write(offset, val);
+}
+static inline void edma_and(int offset, unsigned and)
+{
+ unsigned val = edma_read(offset);
+ val &= and;
+ edma_write(offset, val);
+}
+static inline void edma_or(int offset, unsigned or)
+{
+ unsigned val = edma_read(offset);
+ val |= or;
+ edma_write(offset, val);
+}
+static inline unsigned int edma_read_array(int offset, int i)
+{
+ return edma_read(offset + (i << 2));
+}
+static inline void edma_write_array(int offset, int i, unsigned val)
+{
+ edma_write(offset + (i << 2), val);
+}
+static inline void edma_modify_array(int offset, int i,
+ unsigned and, unsigned or)
+{
+ edma_modify(offset + (i << 2), and, or);
+}
+static inline void edma_or_array(int offset, int i, unsigned or)
+{
+ edma_or(offset + (i << 2), or);
+}
+static inline void edma_or_array2(int offset, int i, int j, unsigned or)
+{
+ edma_or(offset + ((i*2 + j) << 2), or);
+}
+static inline void edma_write_array2(int offset, int i, int j, unsigned val)
+{
+ edma_write(offset + ((i*2 + j) << 2), val);
+}
+static inline unsigned int edma_shadow0_read(int offset)
+{
+ return edma_read(EDMA_SHADOW0 + offset);
+}
+static inline unsigned int edma_shadow0_read_array(int offset, int i)
+{
+ return edma_read(EDMA_SHADOW0 + offset + (i << 2));
+}
+static inline void edma_shadow0_write(int offset, unsigned val)
+{
+ edma_write(EDMA_SHADOW0 + offset, val);
+}
+static inline void edma_shadow0_write_array(int offset, int i, unsigned val)
+{
+ edma_write(EDMA_SHADOW0 + offset + (i << 2), val);
+}
+static inline unsigned int edma_parm_read(int offset, int param_no)
+{
+ return edma_read(EDMA_PARM + offset + (param_no << 5));
+}
+static inline void edma_parm_write(int offset, int param_no, unsigned val)
+{
+ edma_write(EDMA_PARM + offset + (param_no << 5), val);
+}
+static inline void edma_parm_modify(int offset, int param_no,
+ unsigned and, unsigned or)
+{
+ edma_modify(EDMA_PARM + offset + (param_no << 5), and, or);
+}
+static inline void edma_parm_and(int offset, int param_no, unsigned and)
+{
+ edma_and(EDMA_PARM + offset + (param_no << 5), and);
+}
+static inline void edma_parm_or(int offset, int param_no, unsigned or)
+{
+ edma_or(EDMA_PARM + offset + (param_no << 5), or);
+}
+
+/*****************************************************************************/
+
+/* actual number of DMA channels and slots on this silicon */
+static unsigned num_channels;
+static unsigned num_slots;
+
+static struct dma_interrupt_data {
+ void (*callback)(unsigned channel, unsigned short ch_status,
+ void *data);
+ void *data;
+} intr_data[EDMA_MAX_DMACH];
+
+/* The edma_inuse bit for each PaRAM slot is clear unless the
+ * channel is in use ... by ARM or DSP, for QDMA, or whatever.
+ */
+static DECLARE_BITMAP(edma_inuse, EDMA_MAX_PARAMENTRY);
+
+/* The edma_noevent bit for each channel is clear unless
+ * it doesn't trigger DMA events on this platform. It uses a
+ * bit of SOC-specific initialization code.
+ */
+static DECLARE_BITMAP(edma_noevent, EDMA_MAX_DMACH);
+
+/* dummy param set used to (re)initialize parameter RAM slots */
+static const struct edmacc_param dummy_paramset = {
+ .link_bcntrld = 0xffff,
+ .ccnt = 1,
+};
+
+static const int __initconst
+queue_tc_mapping[EDMA_MAX_EVQUE + 1][2] = {
+/* {event queue no, TC no} */
+ {0, 0},
+ {1, 1},
+ {-1, -1}
+};
+
+static const int __initconst
+queue_priority_mapping[EDMA_MAX_EVQUE + 1][2] = {
+ /* {event queue no, Priority} */
+ {0, 3},
+ {1, 7},
+ {-1, -1}
+};
+
+/*****************************************************************************/
+
+static void map_dmach_queue(unsigned ch_no, enum dma_event_q queue_no)
+{
+ int bit = (ch_no & 0x7) * 4;
+
+ /* default to low priority queue */
+ if (queue_no == EVENTQ_DEFAULT)
+ queue_no = EVENTQ_1;
+
+ queue_no &= 7;
+ edma_modify_array(EDMA_DMAQNUM, (ch_no >> 3),
+ ~(0x7 << bit), queue_no << bit);
+}
+
+static void __init map_queue_tc(int queue_no, int tc_no)
+{
+ int bit = queue_no * 4;
+ edma_modify(EDMA_QUETCMAP, ~(0x7 << bit), ((tc_no & 0x7) << bit));
+}
+
+static void __init assign_priority_to_queue(int queue_no, int priority)
+{
+ int bit = queue_no * 4;
+ edma_modify(EDMA_QUEPRI, ~(0x7 << bit), ((priority & 0x7) << bit));
+}
+
+static inline void
+setup_dma_interrupt(unsigned lch,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data)
+{
+ if (!callback) {
+ edma_shadow0_write_array(SH_IECR, lch >> 5,
+ (1 << (lch & 0x1f)));
+ }
+
+ intr_data[lch].callback = callback;
+ intr_data[lch].data = data;
+
+ if (callback) {
+ edma_shadow0_write_array(SH_ICR, lch >> 5,
+ (1 << (lch & 0x1f)));
+ edma_shadow0_write_array(SH_IESR, lch >> 5,
+ (1 << (lch & 0x1f)));
+ }
+}
+
+/******************************************************************************
+ *
+ * DMA interrupt handler
+ *
+ *****************************************************************************/
+static irqreturn_t dma_irq_handler(int irq, void *data)
+{
+ int i;
+ unsigned int cnt = 0;
+
+ dev_dbg(data, "dma_irq_handler\n");
+
+ if ((edma_shadow0_read_array(SH_IPR, 0) == 0)
+ && (edma_shadow0_read_array(SH_IPR, 1) == 0))
+ return IRQ_NONE;
+
+ while (1) {
+ int j;
+ if (edma_shadow0_read_array(SH_IPR, 0))
+ j = 0;
+ else if (edma_shadow0_read_array(SH_IPR, 1))
+ j = 1;
+ else
+ break;
+ dev_dbg(data, "IPR%d %08x\n", j,
+ edma_shadow0_read_array(SH_IPR, j));
+ for (i = 0; i < 32; i++) {
+ int k = (j << 5) + i;
+ if (edma_shadow0_read_array(SH_IPR, j) & (1 << i)) {
+ /* Clear the corresponding IPR bits */
+ edma_shadow0_write_array(SH_ICR, j, (1 << i));
+ if (intr_data[k].callback) {
+ intr_data[k].callback(k, DMA_COMPLETE,
+ intr_data[k].data);
+ }
+ }
+ }
+ cnt++;
+ if (cnt > 10)
+ break;
+ }
+ edma_shadow0_write(SH_IEVAL, 1);
+ return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ *
+ * DMA error interrupt handler
+ *
+ *****************************************************************************/
+static irqreturn_t dma_ccerr_handler(int irq, void *data)
+{
+ int i;
+ unsigned int cnt = 0;
+
+ dev_dbg(data, "dma_ccerr_handler\n");
+
+ if ((edma_read_array(EDMA_EMR, 0) == 0) &&
+ (edma_read_array(EDMA_EMR, 1) == 0) &&
+ (edma_read(EDMA_QEMR) == 0) && (edma_read(EDMA_CCERR) == 0))
+ return IRQ_NONE;
+
+ while (1) {
+ int j = -1;
+ if (edma_read_array(EDMA_EMR, 0))
+ j = 0;
+ else if (edma_read_array(EDMA_EMR, 1))
+ j = 1;
+ if (j >= 0) {
+ dev_dbg(data, "EMR%d %08x\n", j,
+ edma_read_array(EDMA_EMR, j));
+ for (i = 0; i < 32; i++) {
+ int k = (j << 5) + i;
+ if (edma_read_array(EDMA_EMR, j) & (1 << i)) {
+ /* Clear the corresponding EMR bits */
+ edma_write_array(EDMA_EMCR, j, 1 << i);
+ /* Clear any SER */
+ edma_shadow0_write_array(SH_SECR, j,
+ (1 << i));
+ if (intr_data[k].callback) {
+ intr_data[k].callback(k,
+ DMA_CC_ERROR,
+ intr_data
+ [k].data);
+ }
+ }
+ }
+ } else if (edma_read(EDMA_QEMR)) {
+ dev_dbg(data, "QEMR %02x\n",
+ edma_read(EDMA_QEMR));
+ for (i = 0; i < 8; i++) {
+ if (edma_read(EDMA_QEMR) & (1 << i)) {
+ /* Clear the corresponding IPR bits */
+ edma_write(EDMA_QEMCR, 1 << i);
+ edma_shadow0_write(SH_QSECR, (1 << i));
+
+ /* NOTE: not reported!! */
+ }
+ }
+ } else if (edma_read(EDMA_CCERR)) {
+ dev_dbg(data, "CCERR %08x\n",
+ edma_read(EDMA_CCERR));
+ /* FIXME: CCERR.BIT(16) ignored! much better
+ * to just write CCERRCLR with CCERR value...
+ */
+ for (i = 0; i < 8; i++) {
+ if (edma_read(EDMA_CCERR) & (1 << i)) {
+ /* Clear the corresponding IPR bits */
+ edma_write(EDMA_CCERRCLR, 1 << i);
+
+ /* NOTE: not reported!! */
+ }
+ }
+ }
+ if ((edma_read_array(EDMA_EMR, 0) == 0)
+ && (edma_read_array(EDMA_EMR, 1) == 0)
+ && (edma_read(EDMA_QEMR) == 0)
+ && (edma_read(EDMA_CCERR) == 0)) {
+ break;
+ }
+ cnt++;
+ if (cnt > 10)
+ break;
+ }
+ edma_write(EDMA_EEVAL, 1);
+ return IRQ_HANDLED;
+}
+
+/******************************************************************************
+ *
+ * Transfer controller error interrupt handlers
+ *
+ *****************************************************************************/
+
+#define tc_errs_handled false /* disabled as long as they're NOPs */
+
+static irqreturn_t dma_tc0err_handler(int irq, void *data)
+{
+ dev_dbg(data, "dma_tc0err_handler\n");
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t dma_tc1err_handler(int irq, void *data)
+{
+ dev_dbg(data, "dma_tc1err_handler\n");
+ return IRQ_HANDLED;
+}
+
+/*-----------------------------------------------------------------------*/
+
+/* Resource alloc/free: dma channels, parameter RAM slots */
+
+/**
+ * edma_alloc_channel - allocate DMA channel and paired parameter RAM
+ * @channel: specific channel to allocate; negative for "any unmapped channel"
+ * @callback: optional; to be issued on DMA completion or errors
+ * @data: passed to callback
+ * @eventq_no: an EVENTQ_* constant, used to choose which Transfer
+ * Controller (TC) executes requests using this channel. Use
+ * EVENTQ_DEFAULT unless you really need a high priority queue.
+ *
+ * This allocates a DMA channel and its associated parameter RAM slot.
+ * The parameter RAM is initialized to hold a dummy transfer.
+ *
+ * Normal use is to pass a specific channel number as @channel, to make
+ * use of hardware events mapped to that channel. When the channel will
+ * be used only for software triggering or event chaining, channels not
+ * mapped to hardware events (or mapped to unused events) are preferable.
+ *
+ * DMA transfers start from a channel using edma_start(), or by
+ * chaining. When the transfer described in that channel's parameter RAM
+ * slot completes, that slot's data may be reloaded through a link.
+ *
+ * DMA errors are only reported to the @callback associated with the
+ * channel driving that transfer, but transfer completion callbacks can
+ * be sent to another channel under control of the TCC field in
+ * the option word of the transfer's parameter RAM set. Drivers must not
+ * use DMA transfer completion callbacks for channels they did not allocate.
+ * (The same applies to TCC codes used in transfer chaining.)
+ *
+ * Returns the number of the channel, else negative errno.
+ */
+int edma_alloc_channel(int channel,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data,
+ enum dma_event_q eventq_no)
+{
+ if (channel < 0) {
+ channel = 0;
+ for (;;) {
+ channel = find_next_bit(edma_noevent,
+ num_channels, channel);
+ if (channel == num_channels)
+ return -ENOMEM;
+ if (!test_and_set_bit(channel, edma_inuse))
+ break;
+ channel++;
+ }
+ } else if (channel >= num_channels) {
+ return -EINVAL;
+ } else if (test_and_set_bit(channel, edma_inuse)) {
+ return -EBUSY;
+ }
+
+ /* ensure access through shadow region 0 */
+ edma_or_array2(EDMA_DRAE, 0, channel >> 5, 1 << (channel & 0x1f));
+
+ /* ensure no events are pending */
+ edma_stop(channel);
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+ &dummy_paramset, PARM_SIZE);
+
+ if (callback)
+ setup_dma_interrupt(channel, callback, data);
+
+ map_dmach_queue(channel, eventq_no);
+
+ return channel;
+}
+EXPORT_SYMBOL(edma_alloc_channel);
+
+
+/**
+ * edma_free_channel - deallocate DMA channel
+ * @channel: dma channel returned from edma_alloc_channel()
+ *
+ * This deallocates the DMA channel and associated parameter RAM slot
+ * allocated by edma_alloc_channel().
+ *
+ * Callers are responsible for ensuring the channel is inactive, and
+ * will not be reactivated by linking, chaining, or software calls to
+ * edma_start().
+ */
+void edma_free_channel(unsigned channel)
+{
+ if (channel >= num_channels)
+ return;
+
+ setup_dma_interrupt(channel, NULL, NULL);
+ /* REVISIT should probably take out of shadow region 0 */
+
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(channel),
+ &dummy_paramset, PARM_SIZE);
+ clear_bit(channel, edma_inuse);
+}
+EXPORT_SYMBOL(edma_free_channel);
+
+/**
+ * edma_alloc_slot - allocate DMA parameter RAM
+ * @slot: specific slot to allocate; negative for "any unused slot"
+ *
+ * This allocates a parameter RAM slot, initializing it to hold a
+ * dummy transfer. Slots allocated using this routine have not been
+ * mapped to a hardware DMA channel, and will normally be used by
+ * linking to them from a slot associated with a DMA channel.
+ *
+ * Normal use is to pass EDMA_SLOT_ANY as the @slot, but specific
+ * slots may be allocated on behalf of DSP firmware.
+ *
+ * Returns the number of the slot, else negative errno.
+ */
+int edma_alloc_slot(int slot)
+{
+ if (slot < 0) {
+ slot = num_channels;
+ for (;;) {
+ slot = find_next_zero_bit(edma_inuse,
+ num_slots, slot);
+ if (slot == num_slots)
+ return -ENOMEM;
+ if (!test_and_set_bit(slot, edma_inuse))
+ break;
+ }
+ } else if (slot < num_channels || slot >= num_slots) {
+ return -EINVAL;
+ } else if (test_and_set_bit(slot, edma_inuse)) {
+ return -EBUSY;
+ }
+
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+ &dummy_paramset, PARM_SIZE);
+
+ return slot;
+}
+EXPORT_SYMBOL(edma_alloc_slot);
+
+/**
+ * edma_free_slot - deallocate DMA parameter RAM
+ * @slot: parameter RAM slot returned from edma_alloc_slot()
+ *
+ * This deallocates the parameter RAM slot allocated by edma_alloc_slot().
+ * Callers are responsible for ensuring the slot is inactive, and will
+ * not be activated.
+ */
+void edma_free_slot(unsigned slot)
+{
+ if (slot < num_channels || slot >= num_slots)
+ return;
+
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot),
+ &dummy_paramset, PARM_SIZE);
+ clear_bit(slot, edma_inuse);
+}
+EXPORT_SYMBOL(edma_free_slot);
+
+/*-----------------------------------------------------------------------*/
+
+/* Parameter RAM operations (i) -- read/write partial slots */
+
+/**
+ * edma_set_src - set initial DMA source address in parameter RAM slot
+ * @slot: parameter RAM slot being configured
+ * @src_port: physical address of source (memory, controller FIFO, etc)
+ * @addressMode: INCR, except in very rare cases
+ * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
+ * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the source address is modified during the DMA transfer
+ * according to edma_set_src_index().
+ */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+ enum address_mode mode, enum fifo_width width)
+{
+ if (slot < num_slots) {
+ unsigned int i = edma_parm_read(PARM_OPT, slot);
+
+ if (mode) {
+ /* set SAM and program FWID */
+ i = (i & ~(EDMA_FWID)) | (SAM | ((width & 0x7) << 8));
+ } else {
+ /* clear SAM */
+ i &= ~SAM;
+ }
+ edma_parm_write(PARM_OPT, slot, i);
+
+ /* set the source port address
+ in source register of param structure */
+ edma_parm_write(PARM_SRC, slot, src_port);
+ }
+}
+EXPORT_SYMBOL(edma_set_src);
+
+/**
+ * edma_set_dest - set initial DMA destination address in parameter RAM slot
+ * @slot: parameter RAM slot being configured
+ * @dest_port: physical address of destination (memory, controller FIFO, etc)
+ * @addressMode: INCR, except in very rare cases
+ * @fifoWidth: ignored unless @addressMode is FIFO, else specifies the
+ * width to use when addressing the fifo (e.g. W8BIT, W32BIT)
+ *
+ * Note that the destination address is modified during the DMA transfer
+ * according to edma_set_dest_index().
+ */
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+ enum address_mode mode, enum fifo_width width)
+{
+ if (slot < num_slots) {
+ unsigned int i = edma_parm_read(PARM_OPT, slot);
+
+ if (mode) {
+ /* set DAM and program FWID */
+ i = (i & ~(EDMA_FWID)) | (DAM | ((width & 0x7) << 8));
+ } else {
+ /* clear DAM */
+ i &= ~DAM;
+ }
+ edma_parm_write(PARM_OPT, slot, i);
+ /* set the destination port address
+ in dest register of param structure */
+ edma_parm_write(PARM_DST, slot, dest_port);
+ }
+}
+EXPORT_SYMBOL(edma_set_dest);
+
+/**
+ * edma_get_position - returns the current transfer points
+ * @slot: parameter RAM slot being examined
+ * @src: pointer to source port position
+ * @dst: pointer to destination port position
+ *
+ * Returns current source and destination addresses for a particular
+ * parameter RAM slot. Its channel should not be active when this is called.
+ */
+void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst)
+{
+ struct edmacc_param temp;
+
+ edma_read_slot(slot, &temp);
+ if (src != NULL)
+ *src = temp.src;
+ if (dst != NULL)
+ *dst = temp.dst;
+}
+EXPORT_SYMBOL(edma_get_position);
+
+/**
+ * edma_set_src_index - configure DMA source address indexing
+ * @slot: parameter RAM slot being configured
+ * @src_bidx: byte offset between source arrays in a frame
+ * @src_cidx: byte offset between source frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx)
+{
+ if (slot < num_slots) {
+ edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+ 0xffff0000, src_bidx);
+ edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+ 0xffff0000, src_cidx);
+ }
+}
+EXPORT_SYMBOL(edma_set_src_index);
+
+/**
+ * edma_set_dest_index - configure DMA destination address indexing
+ * @slot: parameter RAM slot being configured
+ * @dest_bidx: byte offset between destination arrays in a frame
+ * @dest_cidx: byte offset between destination frames in a block
+ *
+ * Offsets are specified to support either contiguous or discontiguous
+ * memory transfers, or repeated access to a hardware register, as needed.
+ * When accessing hardware registers, both offsets are normally zero.
+ */
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx)
+{
+ if (slot < num_slots) {
+ edma_parm_modify(PARM_SRC_DST_BIDX, slot,
+ 0x0000ffff, dest_bidx << 16);
+ edma_parm_modify(PARM_SRC_DST_CIDX, slot,
+ 0x0000ffff, dest_cidx << 16);
+ }
+}
+EXPORT_SYMBOL(edma_set_dest_index);
+
+/**
+ * edma_set_transfer_params - configure DMA transfer parameters
+ * @slot: parameter RAM slot being configured
+ * @acnt: how many bytes per array (at least one)
+ * @bcnt: how many arrays per frame (at least one)
+ * @ccnt: how many frames per block (at least one)
+ * @bcnt_rld: used only for A-Synchronized transfers; this specifies
+ * the value to reload into bcnt when it decrements to zero
+ * @sync_mode: ASYNC or ABSYNC
+ *
+ * See the EDMA3 documentation to understand how to configure and link
+ * transfers using the fields in PaRAM slots. If you are not doing it
+ * all at once with edma_write_slot(), you will use this routine
+ * plus two calls each for source and destination, setting the initial
+ * address and saying how to index that address.
+ *
+ * An example of an A-Synchronized transfer is a serial link using a
+ * single word shift register. In that case, @acnt would be equal to
+ * that word size; the serial controller issues a DMA synchronization
+ * event to transfer each word, and memory access by the DMA transfer
+ * controller will be word-at-a-time.
+ *
+ * An example of an AB-Synchronized transfer is a device using a FIFO.
+ * In that case, @acnt equals the FIFO width and @bcnt equals its depth.
+ * The controller with the FIFO issues DMA synchronization events when
+ * the FIFO threshold is reached, and the DMA transfer controller will
+ * transfer one frame to (or from) the FIFO. It will probably use
+ * efficient burst modes to access memory.
+ */
+void edma_set_transfer_params(unsigned slot,
+ u16 acnt, u16 bcnt, u16 ccnt,
+ u16 bcnt_rld, enum sync_dimension sync_mode)
+{
+ if (slot < num_slots) {
+ edma_parm_modify(PARM_LINK_BCNTRLD, slot,
+ 0x0000ffff, bcnt_rld << 16);
+ if (sync_mode == ASYNC)
+ edma_parm_and(PARM_OPT, slot, ~SYNCDIM);
+ else
+ edma_parm_or(PARM_OPT, slot, SYNCDIM);
+ /* Set the acount, bcount, ccount registers */
+ edma_parm_write(PARM_A_B_CNT, slot, (bcnt << 16) | acnt);
+ edma_parm_write(PARM_CCNT, slot, ccnt);
+ }
+}
+EXPORT_SYMBOL(edma_set_transfer_params);
+
+/**
+ * edma_link - link one parameter RAM slot to another
+ * @from: parameter RAM slot originating the link
+ * @to: parameter RAM slot which is the link target
+ *
+ * The originating slot should not be part of any active DMA transfer.
+ */
+void edma_link(unsigned from, unsigned to)
+{
+ if (from >= num_slots)
+ return;
+ if (to >= num_slots)
+ return;
+ edma_parm_modify(PARM_LINK_BCNTRLD, from, 0xffff0000, PARM_OFFSET(to));
+}
+EXPORT_SYMBOL(edma_link);
+
+/**
+ * edma_unlink - cut link from one parameter RAM slot
+ * @from: parameter RAM slot originating the link
+ *
+ * The originating slot should not be part of any active DMA transfer.
+ * Its link is set to 0xffff.
+ */
+void edma_unlink(unsigned from)
+{
+ if (from >= num_slots)
+ return;
+ edma_parm_or(PARM_LINK_BCNTRLD, from, 0xffff);
+}
+EXPORT_SYMBOL(edma_unlink);
+
+/*-----------------------------------------------------------------------*/
+
+/* Parameter RAM operations (ii) -- read/write whole parameter sets */
+
+/**
+ * edma_write_slot - write parameter RAM data for slot
+ * @slot: number of parameter RAM slot being modified
+ * @param: data to be written into parameter RAM slot
+ *
+ * Use this to assign all parameters of a transfer at once. This
+ * allows more efficient setup of transfers than issuing multiple
+ * calls to set up those parameters in small pieces, and provides
+ * complete control over all transfer options.
+ */
+void edma_write_slot(unsigned slot, const struct edmacc_param *param)
+{
+ if (slot >= num_slots)
+ return;
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(slot), param, PARM_SIZE);
+}
+EXPORT_SYMBOL(edma_write_slot);
+
+/**
+ * edma_read_slot - read parameter RAM data from slot
+ * @slot: number of parameter RAM slot being copied
+ * @param: where to store copy of parameter RAM data
+ *
+ * Use this to read data from a parameter RAM slot, perhaps to
+ * save them as a template for later reuse.
+ */
+void edma_read_slot(unsigned slot, struct edmacc_param *param)
+{
+ if (slot >= num_slots)
+ return;
+ memcpy_fromio(param, edmacc_regs_base + PARM_OFFSET(slot), PARM_SIZE);
+}
+EXPORT_SYMBOL(edma_read_slot);
+
+/*-----------------------------------------------------------------------*/
+
+/* Various EDMA channel control operations */
+
+/**
+ * edma_pause - pause dma on a channel
+ * @channel: on which edma_start() has been called
+ *
+ * This temporarily disables EDMA hardware events on the specified channel,
+ * preventing them from triggering new transfers on its behalf
+ */
+void edma_pause(unsigned channel)
+{
+ if (channel < num_channels) {
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ edma_shadow0_write_array(SH_EECR, channel >> 5, mask);
+ }
+}
+EXPORT_SYMBOL(edma_pause);
+
+/**
+ * edma_resume - resumes dma on a paused channel
+ * @channel: on which edma_pause() has been called
+ *
+ * This re-enables EDMA hardware events on the specified channel.
+ */
+void edma_resume(unsigned channel)
+{
+ if (channel < num_channels) {
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ edma_shadow0_write_array(SH_EESR, channel >> 5, mask);
+ }
+}
+EXPORT_SYMBOL(edma_resume);
+
+/**
+ * edma_start - start dma on a channel
+ * @channel: channel being activated
+ *
+ * Channels with event associations will be triggered by their hardware
+ * events, and channels without such associations will be triggered by
+ * software. (At this writing there is no interface for using software
+ * triggers except with channels that don't support hardware triggers.)
+ *
+ * Returns zero on success, else negative errno.
+ */
+int edma_start(unsigned channel)
+{
+ if (channel < num_channels) {
+ int j = channel >> 5;
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ /* EDMA channels without event association */
+ if (test_bit(channel, edma_noevent)) {
+ pr_debug("EDMA: ESR%d %08x\n", j,
+ edma_shadow0_read_array(SH_ESR, j));
+ edma_shadow0_write_array(SH_ESR, j, mask);
+ return 0;
+ }
+
+ /* EDMA channel with event association */
+ pr_debug("EDMA: ER%d %08x\n", j,
+ edma_shadow0_read_array(SH_ER, j));
+ /* Clear any pending error */
+ edma_write_array(EDMA_EMCR, j, mask);
+ /* Clear any SER */
+ edma_shadow0_write_array(SH_SECR, j, mask);
+ edma_shadow0_write_array(SH_EESR, j, mask);
+ pr_debug("EDMA: EER%d %08x\n", j,
+ edma_shadow0_read_array(SH_EER, j));
+ return 0;
+ }
+
+ return -EINVAL;
+}
+EXPORT_SYMBOL(edma_start);
+
+/**
+ * edma_stop - stops dma on the channel passed
+ * @channel: channel being deactivated
+ *
+ * When @lch is a channel, any active transfer is paused and
+ * all pending hardware events are cleared. The current transfer
+ * may not be resumed, and the channel's Parameter RAM should be
+ * reinitialized before being reused.
+ */
+void edma_stop(unsigned channel)
+{
+ if (channel < num_channels) {
+ int j = channel >> 5;
+ unsigned int mask = (1 << (channel & 0x1f));
+
+ edma_shadow0_write_array(SH_EECR, j, mask);
+ edma_shadow0_write_array(SH_ECR, j, mask);
+ edma_shadow0_write_array(SH_SECR, j, mask);
+ edma_write_array(EDMA_EMCR, j, mask);
+
+ pr_debug("EDMA: EER%d %08x\n", j,
+ edma_shadow0_read_array(SH_EER, j));
+
+ /* REVISIT: consider guarding against inappropriate event
+ * chaining by overwriting with dummy_paramset.
+ */
+ }
+}
+EXPORT_SYMBOL(edma_stop);
+
+/******************************************************************************
+ *
+ * It cleans ParamEntry qand bring back EDMA to initial state if media has
+ * been removed before EDMA has finished.It is usedful for removable media.
+ * Arguments:
+ * ch_no - channel no
+ *
+ * Return: zero on success, or corresponding error no on failure
+ *
+ * FIXME this should not be needed ... edma_stop() should suffice.
+ *
+ *****************************************************************************/
+
+void edma_clean_channel(unsigned channel)
+{
+ if (channel < num_channels) {
+ int j = (channel >> 5);
+ unsigned int mask = 1 << (channel & 0x1f);
+
+ pr_debug("EDMA: EMR%d %08x\n", j,
+ edma_read_array(EDMA_EMR, j));
+ edma_shadow0_write_array(SH_ECR, j, mask);
+ /* Clear the corresponding EMR bits */
+ edma_write_array(EDMA_EMCR, j, mask);
+ /* Clear any SER */
+ edma_shadow0_write_array(SH_SECR, j, mask);
+ edma_write(EDMA_CCERRCLR, (1 << 16) | 0x3);
+ }
+}
+EXPORT_SYMBOL(edma_clean_channel);
+
+/*
+ * edma_clear_event - clear an outstanding event on the DMA channel
+ * Arguments:
+ * channel - channel number
+ */
+void edma_clear_event(unsigned channel)
+{
+ if (channel >= num_channels)
+ return;
+ if (channel < 32)
+ edma_write(EDMA_ECR, 1 << channel);
+ else
+ edma_write(EDMA_ECRH, 1 << (channel - 32));
+}
+EXPORT_SYMBOL(edma_clear_event);
+
+/*-----------------------------------------------------------------------*/
+
+static int __init edma_probe(struct platform_device *pdev)
+{
+ struct edma_soc_info *info = pdev->dev.platform_data;
+ int i;
+ int status;
+ const s8 *noevent;
+ int irq = 0, err_irq = 0;
+ struct resource *r;
+ resource_size_t len;
+
+ if (!info)
+ return -ENODEV;
+
+ r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "edma_cc");
+ if (!r)
+ return -ENODEV;
+
+ len = r->end - r->start + 1;
+
+ r = request_mem_region(r->start, len, r->name);
+ if (!r)
+ return -EBUSY;
+
+ edmacc_regs_base = ioremap(r->start, len);
+ if (!edmacc_regs_base) {
+ status = -EBUSY;
+ goto fail1;
+ }
+
+ num_channels = min_t(unsigned, info->n_channel, EDMA_MAX_DMACH);
+ num_slots = min_t(unsigned, info->n_slot, EDMA_MAX_PARAMENTRY);
+
+ dev_dbg(&pdev->dev, "DMA REG BASE ADDR=%p\n", edmacc_regs_base);
+
+ for (i = 0; i < num_slots; i++)
+ memcpy_toio(edmacc_regs_base + PARM_OFFSET(i),
+ &dummy_paramset, PARM_SIZE);
+
+ noevent = info->noevent;
+ if (noevent) {
+ while (*noevent != -1)
+ set_bit(*noevent++, edma_noevent);
+ }
+
+ irq = platform_get_irq(pdev, 0);
+ status = request_irq(irq, dma_irq_handler, 0, "edma", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+ irq, status);
+ goto fail;
+ }
+
+ err_irq = platform_get_irq(pdev, 1);
+ status = request_irq(err_irq, dma_ccerr_handler, 0,
+ "edma_error", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+ err_irq, status);
+ goto fail;
+ }
+
+ if (tc_errs_handled) {
+ status = request_irq(IRQ_TCERRINT0, dma_tc0err_handler, 0,
+ "edma_tc0", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d failed --> %d\n",
+ IRQ_TCERRINT0, status);
+ return status;
+ }
+ status = request_irq(IRQ_TCERRINT, dma_tc1err_handler, 0,
+ "edma_tc1", &pdev->dev);
+ if (status < 0) {
+ dev_dbg(&pdev->dev, "request_irq %d --> %d\n",
+ IRQ_TCERRINT, status);
+ return status;
+ }
+ }
+
+ /* Everything lives on transfer controller 1 until otherwise specified.
+ * This way, long transfers on the low priority queue
+ * started by the codec engine will not cause audio defects.
+ */
+ for (i = 0; i < num_channels; i++)
+ map_dmach_queue(i, EVENTQ_1);
+
+ /* Event queue to TC mapping */
+ for (i = 0; queue_tc_mapping[i][0] != -1; i++)
+ map_queue_tc(queue_tc_mapping[i][0], queue_tc_mapping[i][1]);
+
+ /* Event queue priority mapping */
+ for (i = 0; queue_priority_mapping[i][0] != -1; i++)
+ assign_priority_to_queue(queue_priority_mapping[i][0],
+ queue_priority_mapping[i][1]);
+
+ for (i = 0; i < info->n_region; i++) {
+ edma_write_array2(EDMA_DRAE, i, 0, 0x0);
+ edma_write_array2(EDMA_DRAE, i, 1, 0x0);
+ edma_write_array(EDMA_QRAE, i, 0x0);
+ }
+
+ return 0;
+
+fail:
+ if (err_irq)
+ free_irq(err_irq, NULL);
+ if (irq)
+ free_irq(irq, NULL);
+ iounmap(edmacc_regs_base);
+fail1:
+ release_mem_region(r->start, len);
+ return status;
+}
+
+
+static struct platform_driver edma_driver = {
+ .driver.name = "edma",
+};
+
+static int __init edma_init(void)
+{
+ return platform_driver_probe(&edma_driver, edma_probe);
+}
+arch_initcall(edma_init);
+
diff --git a/arch/arm/mach-davinci/gpio.c b/arch/arm/mach-davinci/gpio.c
index b49e9d092aa..1aba41c6351 100644
--- a/arch/arm/mach-davinci/gpio.c
+++ b/arch/arm/mach-davinci/gpio.c
@@ -20,6 +20,7 @@
#include <linux/irq.h>
#include <linux/bitops.h>
+#include <mach/cputype.h>
#include <mach/irqs.h>
#include <mach/hardware.h>
#include <mach/gpio.h>
@@ -36,9 +37,10 @@ struct davinci_gpio {
static struct davinci_gpio chips[DIV_ROUND_UP(DAVINCI_N_GPIO, 32)];
+static unsigned __initdata ngpio;
/* create a non-inlined version */
-static struct gpio_controller *__iomem __init gpio2controller(unsigned gpio)
+static struct gpio_controller __iomem * __init gpio2controller(unsigned gpio)
{
return __gpio_to_controller(gpio);
}
@@ -114,9 +116,30 @@ static int __init davinci_gpio_setup(void)
{
int i, base;
- for (i = 0, base = 0;
- i < ARRAY_SIZE(chips);
- i++, base += 32) {
+ /* The gpio banks conceptually expose a segmented bitmap,
+ * and "ngpio" is one more than the largest zero-based
+ * bit index that's valid.
+ */
+ if (cpu_is_davinci_dm355()) { /* or dm335() */
+ ngpio = 104;
+ } else if (cpu_is_davinci_dm644x()) { /* or dm337() */
+ ngpio = 71;
+ } else if (cpu_is_davinci_dm646x()) {
+ /* NOTE: each bank has several "reserved" bits,
+ * unusable as GPIOs. Only 33 of the GPIO numbers
+ * are usable, and we're not rejecting the others.
+ */
+ ngpio = 43;
+ } else {
+ /* if cpu_is_davinci_dm643x() ngpio = 111 */
+ pr_err("GPIO setup: how many GPIOs?\n");
+ return -EINVAL;
+ }
+
+ if (WARN_ON(DAVINCI_N_GPIO < ngpio))
+ ngpio = DAVINCI_N_GPIO;
+
+ for (i = 0, base = 0; base < ngpio; i++, base += 32) {
chips[i].chip.label = "DaVinci";
chips[i].chip.direction_input = davinci_direction_in;
@@ -125,7 +148,7 @@ static int __init davinci_gpio_setup(void)
chips[i].chip.set = davinci_gpio_set;
chips[i].chip.base = base;
- chips[i].chip.ngpio = DAVINCI_N_GPIO - base;
+ chips[i].chip.ngpio = ngpio - base;
if (chips[i].chip.ngpio > 32)
chips[i].chip.ngpio = 32;
@@ -143,11 +166,11 @@ pure_initcall(davinci_gpio_setup);
* We expect irqs will normally be set up as input pins, but they can also be
* used as output pins ... which is convenient for testing.
*
- * NOTE: GPIO0..GPIO7 also have direct INTC hookups, which work in addition
- * to their GPIOBNK0 irq (but with a bit less overhead). But we don't have
- * a good way to hook those up ...
+ * NOTE: The first few GPIOs also have direct INTC hookups in addition
+ * to their GPIOBNK0 irq, with a bit less overhead but less flexibility
+ * on triggering (e.g. no edge options). We don't try to use those.
*
- * All those INTC hookups (GPIO0..GPIO7 plus five IRQ banks) can also
+ * All those INTC hookups (direct, plus several IRQ banks) can also
* serve as EDMA event triggers.
*/
@@ -235,29 +258,42 @@ gpio_irq_handler(unsigned irq, struct irq_desc *desc)
}
/*
- * NOTE: for suspend/resume, probably best to make a sysdev (and class)
- * with its suspend/resume calls hooking into the results of the set_wake()
+ * NOTE: for suspend/resume, probably best to make a platform_device with
+ * suspend_late/resume_resume calls hooking into results of the set_wake()
* calls ... so if no gpios are wakeup events the clock can be disabled,
* with outputs left at previously set levels, and so that VDD3P3V.IOPWDN0
- * can be set appropriately for GPIOV33 pins.
+ * (dm6446) can be set appropriately for GPIOV33 pins.
*/
static int __init davinci_gpio_irq_setup(void)
{
unsigned gpio, irq, bank;
+ unsigned bank_irq;
struct clk *clk;
+ u32 binten = 0;
+
+ if (cpu_is_davinci_dm355()) { /* or dm335() */
+ bank_irq = IRQ_DM355_GPIOBNK0;
+ } else if (cpu_is_davinci_dm644x()) {
+ bank_irq = IRQ_GPIOBNK0;
+ } else if (cpu_is_davinci_dm646x()) {
+ bank_irq = IRQ_DM646X_GPIOBNK0;
+ } else {
+ printk(KERN_ERR "Don't know first GPIO bank IRQ.\n");
+ return -EINVAL;
+ }
clk = clk_get(NULL, "gpio");
if (IS_ERR(clk)) {
printk(KERN_ERR "Error %ld getting gpio clock?\n",
PTR_ERR(clk));
- return 0;
+ return PTR_ERR(clk);
}
-
clk_enable(clk);
- for (gpio = 0, irq = gpio_to_irq(0), bank = IRQ_GPIOBNK0;
- gpio < DAVINCI_N_GPIO; bank++) {
+ for (gpio = 0, irq = gpio_to_irq(0), bank = 0;
+ gpio < ngpio;
+ bank++, bank_irq++) {
struct gpio_controller *__iomem g = gpio2controller(gpio);
unsigned i;
@@ -265,28 +301,28 @@ static int __init davinci_gpio_irq_setup(void)
__raw_writel(~0, &g->clr_rising);
/* set up all irqs in this bank */
- set_irq_chained_handler(bank, gpio_irq_handler);
- set_irq_chip_data(bank, g);
- set_irq_data(bank, (void *)irq);
+ set_irq_chained_handler(bank_irq, gpio_irq_handler);
+ set_irq_chip_data(bank_irq, g);
+ set_irq_data(bank_irq, (void *)irq);
- for (i = 0; i < 16 && gpio < DAVINCI_N_GPIO;
- i++, irq++, gpio++) {
+ for (i = 0; i < 16 && gpio < ngpio; i++, irq++, gpio++) {
set_irq_chip(irq, &gpio_irqchip);
set_irq_chip_data(irq, g);
set_irq_handler(irq, handle_simple_irq);
set_irq_flags(irq, IRQF_VALID);
}
+
+ binten |= BIT(bank);
}
/* BINTEN -- per-bank interrupt enable. genirq would also let these
* bits be set/cleared dynamically.
*/
- __raw_writel(0x1f, (void *__iomem)
+ __raw_writel(binten, (void *__iomem)
IO_ADDRESS(DAVINCI_GPIO_BASE + 0x08));
printk(KERN_INFO "DaVinci: %d gpio irqs\n", irq - gpio_to_irq(0));
return 0;
}
-
arch_initcall(davinci_gpio_irq_setup);
diff --git a/arch/arm/mach-davinci/id.c b/arch/arm/mach-davinci/id.c
index bf067d60491..018b994cd79 100644
--- a/arch/arm/mach-davinci/id.c
+++ b/arch/arm/mach-davinci/id.c
@@ -15,7 +15,9 @@
#include <linux/init.h>
#include <linux/io.h>
-#define JTAG_ID_BASE 0x01c40028
+#define JTAG_ID_BASE IO_ADDRESS(0x01c40028)
+
+static unsigned int davinci_revision;
struct davinci_id {
u8 variant; /* JTAG ID bits 31:28 */
@@ -33,6 +35,20 @@ static struct davinci_id davinci_ids[] __initdata = {
.manufacturer = 0x017,
.type = 0x64460000,
},
+ {
+ /* DM646X */
+ .part_no = 0xb770,
+ .variant = 0x0,
+ .manufacturer = 0x017,
+ .type = 0x64670000,
+ },
+ {
+ /* DM355 */
+ .part_no = 0xb73b,
+ .variant = 0x0,
+ .manufacturer = 0x00f,
+ .type = 0x03550000,
+ },
};
/*
@@ -42,7 +58,7 @@ static u16 __init davinci_get_part_no(void)
{
u32 dev_id, part_no;
- dev_id = davinci_readl(JTAG_ID_BASE);
+ dev_id = __raw_readl(JTAG_ID_BASE);
part_no = ((dev_id >> 12) & 0xffff);
@@ -56,13 +72,19 @@ static u8 __init davinci_get_variant(void)
{
u32 variant;
- variant = davinci_readl(JTAG_ID_BASE);
+ variant = __raw_readl(JTAG_ID_BASE);
variant = (variant >> 28) & 0xf;
return variant;
}
+unsigned int davinci_rev(void)
+{
+ return davinci_revision >> 16;
+}
+EXPORT_SYMBOL(davinci_rev);
+
void __init davinci_check_revision(void)
{
int i;
@@ -75,7 +97,7 @@ void __init davinci_check_revision(void)
/* First check only the major version in a safe way */
for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
if (part_no == (davinci_ids[i].part_no)) {
- system_rev = davinci_ids[i].type;
+ davinci_revision = davinci_ids[i].type;
break;
}
}
@@ -84,10 +106,11 @@ void __init davinci_check_revision(void)
for (i = 0; i < ARRAY_SIZE(davinci_ids); i++) {
if (part_no == davinci_ids[i].part_no &&
variant == davinci_ids[i].variant) {
- system_rev = davinci_ids[i].type;
+ davinci_revision = davinci_ids[i].type;
break;
}
}
- printk("DaVinci DM%04x variant 0x%x\n", system_rev >> 16, variant);
+ printk(KERN_INFO "DaVinci DM%04x variant 0x%x\n",
+ davinci_rev(), variant);
}
diff --git a/arch/arm/mach-davinci/include/mach/asp.h b/arch/arm/mach-davinci/include/mach/asp.h
new file mode 100644
index 00000000000..e0abc437d79
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/asp.h
@@ -0,0 +1,25 @@
+/*
+ * <mach/asp.h> - DaVinci Audio Serial Port support
+ */
+#ifndef __ASM_ARCH_DAVINCI_ASP_H
+#define __ASM_ARCH_DAVINCI_ASP_H
+
+#include <mach/irqs.h>
+
+/* Bases of register banks */
+#define DAVINCI_ASP0_BASE 0x01E02000
+#define DAVINCI_ASP1_BASE 0x01E04000
+
+/* EDMA channels */
+#define DAVINCI_DMA_ASP0_TX 2
+#define DAVINCI_DMA_ASP0_RX 3
+#define DAVINCI_DMA_ASP1_TX 8
+#define DAVINCI_DMA_ASP1_RX 9
+
+/* Interrupts */
+#define DAVINCI_ASP0_RX_INT IRQ_MBRINT
+#define DAVINCI_ASP0_TX_INT IRQ_MBXINT
+#define DAVINCI_ASP1_RX_INT IRQ_MBRINT
+#define DAVINCI_ASP1_TX_INT IRQ_MBXINT
+
+#endif /* __ASM_ARCH_DAVINCI_ASP_H */
diff --git a/arch/arm/mach-davinci/include/mach/board-dm6446evm.h b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
new file mode 100644
index 00000000000..3216f21c123
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/board-dm6446evm.h
@@ -0,0 +1,20 @@
+/*
+ * DaVinci DM6446 EVM board specific headers
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or ifndef.
+ */
+
+#ifndef _MACH_DAVINCI_DM6446EVM_H
+#define _MACH_DAVINCI_DM6446EVM_H
+
+#include <linux/types.h>
+
+int dm6446evm_eeprom_read(char *buf, off_t off, size_t count);
+int dm6446evm_eeprom_write(char *buf, off_t off, size_t count);
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/clkdev.h b/arch/arm/mach-davinci/include/mach/clkdev.h
new file mode 100644
index 00000000000..730c49d1ebd
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/clkdev.h
@@ -0,0 +1,13 @@
+#ifndef __MACH_CLKDEV_H
+#define __MACH_CLKDEV_H
+
+static inline int __clk_get(struct clk *clk)
+{
+ return 1;
+}
+
+static inline void __clk_put(struct clk *clk)
+{
+}
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/clock.h b/arch/arm/mach-davinci/include/mach/clock.h
index 38bdd49bc18..a3b04021987 100644
--- a/arch/arm/mach-davinci/include/mach/clock.h
+++ b/arch/arm/mach-davinci/include/mach/clock.h
@@ -17,6 +17,5 @@ struct clk;
extern int clk_register(struct clk *clk);
extern void clk_unregister(struct clk *clk);
-extern int davinci_clk_init(void);
#endif
diff --git a/arch/arm/mach-davinci/include/mach/common.h b/arch/arm/mach-davinci/include/mach/common.h
index 4b522e5c70e..19177097625 100644
--- a/arch/arm/mach-davinci/include/mach/common.h
+++ b/arch/arm/mach-davinci/include/mach/common.h
@@ -16,6 +16,12 @@ struct sys_timer;
extern struct sys_timer davinci_timer;
+extern void davinci_irq_init(void);
+extern void davinci_map_common_io(void);
+
+/* parameters describe VBUS sourcing for host mode */
+extern void setup_usb(unsigned mA, unsigned potpgt_msec);
+
/* parameters describe VBUS sourcing for host mode */
extern void setup_usb(unsigned mA, unsigned potpgt_msec);
diff --git a/arch/arm/mach-davinci/include/mach/cputype.h b/arch/arm/mach-davinci/include/mach/cputype.h
new file mode 100644
index 00000000000..27cfb1b3a66
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/cputype.h
@@ -0,0 +1,49 @@
+/*
+ * DaVinci CPU type detection
+ *
+ * Author: Kevin Hilman, Deep Root Systems, LLC
+ *
+ * Defines the cpu_is_*() macros for runtime detection of DaVinci
+ * device type. In addtion, if support for a given device is not
+ * compiled in to the kernel, the macros return 0 so that
+ * resulting code can be optimized out.
+ *
+ * 2009 (c) Deep Root Systems, LLC. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ */
+#ifndef _ASM_ARCH_CPU_H
+#define _ASM_ARCH_CPU_H
+
+extern unsigned int davinci_rev(void);
+
+#define IS_DAVINCI_CPU(type, id) \
+static inline int is_davinci_dm ##type(void) \
+{ \
+ return (davinci_rev() == (id)) ? 1 : 0; \
+}
+
+IS_DAVINCI_CPU(644x, 0x6446)
+IS_DAVINCI_CPU(646x, 0x6467)
+IS_DAVINCI_CPU(355, 0x355)
+
+#ifdef CONFIG_ARCH_DAVINCI_DM644x
+#define cpu_is_davinci_dm644x() is_davinci_dm644x()
+#else
+#define cpu_is_davinci_dm644x() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DM646x
+#define cpu_is_davinci_dm646x() is_davinci_dm646x()
+#else
+#define cpu_is_davinci_dm646x() 0
+#endif
+
+#ifdef CONFIG_ARCH_DAVINCI_DM355
+#define cpu_is_davinci_dm355() is_davinci_dm355()
+#else
+#define cpu_is_davinci_dm355() 0
+#endif
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/dm644x.h b/arch/arm/mach-davinci/include/mach/dm644x.h
new file mode 100644
index 00000000000..3dcb9f4e58b
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/dm644x.h
@@ -0,0 +1,37 @@
+/*
+ * This file contains the processor specific definitions
+ * of the TI DM644x.
+ *
+ * Copyright (C) 2008 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ *
+ */
+#ifndef __ASM_ARCH_DM644X_H
+#define __ASM_ARCH_DM644X_H
+
+#include <linux/platform_device.h>
+#include <mach/hardware.h>
+
+#define DM644X_EMAC_BASE (0x01C80000)
+#define DM644X_EMAC_CNTRL_OFFSET (0x0000)
+#define DM644X_EMAC_CNTRL_MOD_OFFSET (0x1000)
+#define DM644X_EMAC_CNTRL_RAM_OFFSET (0x2000)
+#define DM644X_EMAC_MDIO_OFFSET (0x4000)
+#define DM644X_EMAC_CNTRL_RAM_SIZE (0x2000)
+
+void __init dm644x_init(void);
+
+#endif /* __ASM_ARCH_DM644X_H */
diff --git a/arch/arm/mach-davinci/include/mach/edma.h b/arch/arm/mach-davinci/include/mach/edma.h
new file mode 100644
index 00000000000..f6fc5396daf
--- /dev/null
+++ b/arch/arm/mach-davinci/include/mach/edma.h
@@ -0,0 +1,228 @@
+/*
+ * TI DAVINCI dma definitions
+ *
+ * Copyright (C) 2006-2009 Texas Instruments.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2 of the License, or (at your
+ * option) any later version.
+ *
+ * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
+ * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
+ * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
+ * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
+ * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
+ * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
+ * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
+ * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ *
+ */
+
+/*
+ * This EDMA3 programming framework exposes two basic kinds of resource:
+ *
+ * Channel Triggers transfers, usually from a hardware event but
+ * also manually or by "chaining" from DMA completions.
+ * Each channel is coupled to a Parameter RAM (PaRAM) slot.
+ *
+ * Slot Each PaRAM slot holds a DMA transfer descriptor (PaRAM
+ * "set"), source and destination addresses, a link to a
+ * next PaRAM slot (if any), options for the transfer, and
+ * instructions for updating those addresses. There are
+ * more than twice as many slots as event channels.
+ *
+ * Each PaRAM set describes a sequence of transfers, either for one large
+ * buffer or for several discontiguous smaller buffers. An EDMA transfer
+ * is driven only from a channel, which performs the transfers specified
+ * in its PaRAM slot until there are no more transfers. When that last
+ * transfer completes, the "link" field may be used to reload the channel's
+ * PaRAM slot with a new transfer descriptor.
+ *
+ * The EDMA Channel Controller (CC) maps requests from channels into physical
+ * Transfer Controller (TC) requests when the channel triggers (by hardware
+ * or software events, or by chaining). The two physical DMA channels provided
+ * by the TCs are thus shared by many logical channels.
+ *
+ * DaVinci hardware also has a "QDMA" mechanism which is not currently
+ * supported through this interface. (DSP firmware uses it though.)
+ */
+
+#ifndef EDMA_H_
+#define EDMA_H_
+
+/* PaRAM slots are laid out like this */
+struct edmacc_param {
+ unsigned int opt;
+ unsigned int src;
+ unsigned int a_b_cnt;
+ unsigned int dst;
+ unsigned int src_dst_bidx;
+ unsigned int link_bcntrld;
+ unsigned int src_dst_cidx;
+ unsigned int ccnt;
+};
+
+#define CCINT0_INTERRUPT 16
+#define CCERRINT_INTERRUPT 17
+#define TCERRINT0_INTERRUPT 18
+#define TCERRINT1_INTERRUPT 19
+
+/* fields in edmacc_param.opt */
+#define SAM BIT(0)
+#define DAM BIT(1)
+#define SYNCDIM BIT(2)
+#define STATIC BIT(3)
+#define EDMA_FWID (0x07 << 8)
+#define TCCMODE BIT(11)
+#define EDMA_TCC(t) ((t) << 12)
+#define TCINTEN BIT(20)
+#define ITCINTEN BIT(21)
+#define TCCHEN BIT(22)
+#define ITCCHEN BIT(23)
+
+#define TRWORD (0x7<<2)
+#define PAENTRY (0x1ff<<5)
+
+/* Drivers should avoid using these symbolic names for dm644x
+ * channels, and use platform_device IORESOURCE_DMA resources
+ * instead. (Other DaVinci chips have different peripherals
+ * and thus have different DMA channel mappings.)
+ */
+#define DAVINCI_DMA_MCBSP_TX 2
+#define DAVINCI_DMA_MCBSP_RX 3
+#define DAVINCI_DMA_VPSS_HIST 4
+#define DAVINCI_DMA_VPSS_H3A 5
+#define DAVINCI_DMA_VPSS_PRVU 6
+#define DAVINCI_DMA_VPSS_RSZ 7
+#define DAVINCI_DMA_IMCOP_IMXINT 8
+#define DAVINCI_DMA_IMCOP_VLCDINT 9
+#define DAVINCI_DMA_IMCO_PASQINT 10
+#define DAVINCI_DMA_IMCOP_DSQINT 11
+#define DAVINCI_DMA_SPI_SPIX 16
+#define DAVINCI_DMA_SPI_SPIR 17
+#define DAVINCI_DMA_UART0_URXEVT0 18
+#define DAVINCI_DMA_UART0_UTXEVT0 19
+#define DAVINCI_DMA_UART1_URXEVT1 20
+#define DAVINCI_DMA_UART1_UTXEVT1 21
+#define DAVINCI_DMA_UART2_URXEVT2 22
+#define DAVINCI_DMA_UART2_UTXEVT2 23
+#define DAVINCI_DMA_MEMSTK_MSEVT 24
+#define DAVINCI_DMA_MMCRXEVT 26
+#define DAVINCI_DMA_MMCTXEVT 27
+#define DAVINCI_DMA_I2C_ICREVT 28
+#define DAVINCI_DMA_I2C_ICXEVT 29
+#define DAVINCI_DMA_GPIO_GPINT0 32
+#define DAVINCI_DMA_GPIO_GPINT1 33
+#define DAVINCI_DMA_GPIO_GPINT2 34
+#define DAVINCI_DMA_GPIO_GPINT3 35
+#define DAVINCI_DMA_GPIO_GPINT4 36
+#define DAVINCI_DMA_GPIO_GPINT5 37
+#define DAVINCI_DMA_GPIO_GPINT6 38
+#define DAVINCI_DMA_GPIO_GPINT7 39
+#define DAVINCI_DMA_GPIO_GPBNKINT0 40
+#define DAVINCI_DMA_GPIO_GPBNKINT1 41
+#define DAVINCI_DMA_GPIO_GPBNKINT2 42
+#define DAVINCI_DMA_GPIO_GPBNKINT3 43
+#define DAVINCI_DMA_GPIO_GPBNKINT4 44
+#define DAVINCI_DMA_TIMER0_TINT0 48
+#define DAVINCI_DMA_TIMER1_TINT1 49
+#define DAVINCI_DMA_TIMER2_TINT2 50
+#define DAVINCI_DMA_TIMER3_TINT3 51
+#define DAVINCI_DMA_PWM0 52
+#define DAVINCI_DMA_PWM1 53
+#define DAVINCI_DMA_PWM2 54
+
+/*ch_status paramater of callback function possible values*/
+#define DMA_COMPLETE 1
+#define DMA_CC_ERROR 2
+#define DMA_TC1_ERROR 3
+#define DMA_TC2_ERROR 4
+
+enum address_mode {
+ INCR = 0,
+ FIFO = 1
+};
+
+enum fifo_width {
+ W8BIT = 0,
+ W16BIT = 1,
+ W32BIT = 2,
+ W64BIT = 3,
+ W128BIT = 4,
+ W256BIT = 5
+};
+
+enum dma_event_q {
+ EVENTQ_0 = 0,
+ EVENTQ_1 = 1,
+ EVENTQ_DEFAULT = -1
+};
+
+enum sync_dimension {
+ ASYNC = 0,
+ ABSYNC = 1
+};
+
+#define EDMA_CHANNEL_ANY -1 /* for edma_alloc_channel() */
+#define EDMA_SLOT_ANY -1 /* for edma_alloc_slot() */
+
+/* alloc/free DMA channels and their dedicated parameter RAM slots */
+int edma_alloc_channel(int channel,
+ void (*callback)(unsigned channel, u16 ch_status, void *data),
+ void *data, enum dma_event_q);
+void edma_free_channel(unsigned channel);
+
+/* alloc/free parameter RAM slots */
+int edma_alloc_slot(int slot);
+void edma_free_slot(unsigned slot);
+
+/* calls that operate on part of a parameter RAM slot */
+void edma_set_src(unsigned slot, dma_addr_t src_port,
+ enum address_mode mode, enum fifo_width);
+void edma_set_dest(unsigned slot, dma_addr_t dest_port,
+ enum address_mode mode, enum fifo_width);
+void edma_get_position(unsigned slot, dma_addr_t *src, dma_addr_t *dst);
+void edma_set_src_index(unsigned slot, s16 src_bidx, s16 src_cidx);
+void edma_set_dest_index(unsigned slot, s16 dest_bidx, s16 dest_cidx);
+void edma_set_transfer_params(unsigned slot, u16 acnt, u16 bcnt, u16 ccnt,
+ u16 bcnt_rld, enum sync_dimension sync_mode);
+void edma_link(unsigned from, unsigned to);
+void edma_unlink(unsigned from);
+
+/* calls that operate on an entire parameter RAM slot */
+void edma_write_slot(unsigned slot, const struct edmacc_param *params);
+void edma_read_slot(unsigned slot, struct edmacc_param *params);
+
+/* channel control operations */
+int edma_start(unsigned channel);
+void edma_stop(unsigned channel);
+void edma_clean_channel(unsigned channel);
+void edma_clear_event(unsigned channel);
+void edma_pause(unsigned channel);
+void edma_resume(unsigned channel);
+
+/* UNRELATED TO DMA */
+int davinci_alloc_iram(unsigned size);
+void davinci_free_iram(unsigned addr, unsigned size);
+
+/* platform_data for EDMA driver */
+struct edma_soc_info {
+
+ /* how many dma resources of each type */
+ unsigned n_channel;
+ unsigned n_region;
+ unsigned n_slot;
+ unsigned n_tc;
+
+ /* list of channels with no even trigger; terminated by "-1" */
+ const s8 *noevent;
+};
+
+#endif
diff --git a/arch/arm/mach-davinci/include/mach/gpio.h b/arch/arm/mach-davinci/include/mach/gpio.h
index b456f079f43..efe3281364e 100644
--- a/arch/arm/mach-davinci/include/mach/gpio.h
+++ b/arch/arm/mach-davinci/include/mach/gpio.h
@@ -15,9 +15,11 @@
#include <linux/io.h>
#include <asm-generic/gpio.h>
-#include <mach/hardware.h>
+
#include <mach/irqs.h>
+#define DAVINCI_GPIO_BASE 0x01C67000
+
/*
* basic gpio routines
*
@@ -26,23 +28,18 @@
* go through boot loaders.
*
* the gpio clock will be turned on when gpios are used, and you may also
- * need to pay attention to PINMUX0 and PINMUX1 to be sure those pins are
+ * need to pay attention to PINMUX registers to be sure those pins are
* used as gpios, not with other peripherals.
*
* On-chip GPIOs are numbered 0..(DAVINCI_N_GPIO-1). For documentation,
- * and maybe for later updates, code should write GPIO(N) or:
- * - GPIOV18(N) for 1.8V pins, N in 0..53; same as GPIO(0)..GPIO(53)
- * - GPIOV33(N) for 3.3V pins, N in 0..17; same as GPIO(54)..GPIO(70)
- *
- * For GPIO IRQs use gpio_to_irq(GPIO(N)) or gpio_to_irq(GPIOV33(N)) etc
- * for now, that's != GPIO(N)
+ * and maybe for later updates, code may write GPIO(N). These may be
+ * all 1.8V signals, all 3.3V ones, or a mix of the two. A given chip
+ * may not support all the GPIOs in that range.
*
* GPIOs can also be on external chips, numbered after the ones built-in
* to the DaVinci chip. For now, they won't be usable as IRQ sources.
*/
-#define GPIO(X) (X) /* 0 <= X <= 70 */
-#define GPIOV18(X) (X) /* 1.8V i/o; 0 <= X <= 53 */
-#define GPIOV33(X) ((X)+54) /* 3.3V i/o; 0 <= X <= 17 */
+#define GPIO(X) (X) /* 0 <= X <= (DAVINCI_N_GPIO - 1) */
struct gpio_controller {
u32 dir;
@@ -71,12 +68,14 @@ __gpio_to_controller(unsigned gpio)
{
void *__iomem ptr;
- if (gpio < 32)
+ if (gpio < 32 * 1)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x10);
- else if (gpio < 64)
+ else if (gpio < 32 * 2)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x38);
- else if (gpio < DAVINCI_N_GPIO)
+ else if (gpio < 32 * 3)
ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x60);
+ else if (gpio < 32 * 4)
+ ptr = IO_ADDRESS(DAVINCI_GPIO_BASE + 0x88);
else
ptr = NULL;
return ptr;
diff --git a/arch/arm/mach-davinci/include/mach/hardware.h b/arch/arm/mach-davinci/include/mach/hardware.h
index a2e8969afac..48c77934d51 100644
--- a/arch/arm/mach-davinci/include/mach/hardware.h
+++ b/arch/arm/mach-davinci/include/mach/hardware.h
@@ -1,9 +1,9 @@
/*
- * Common hardware definitions
+ * Hardware definitions common to all DaVinci family processors
*
- * Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
+ * Author: Kevin Hilman, Deep Root Systems, LLC
*
- * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * 2007 (c) Deep Root Systems, LLC. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
@@ -12,41 +12,16 @@
#define __ASM_ARCH_HARDWARE_H
/*
- * Base register addresses
+ * Before you add anything to ths file:
+ *
+ * This header is for defines common to ALL DaVinci family chips.
+ * Anything that is chip specific should go in <chipname>.h,
+ * and the chip/board init code should then explicitly include
+ * <chipname>.h
*/
-#define DAVINCI_DMA_3PCC_BASE (0x01C00000)
-#define DAVINCI_DMA_3PTC0_BASE (0x01C10000)
-#define DAVINCI_DMA_3PTC1_BASE (0x01C10400)
-#define DAVINCI_I2C_BASE (0x01C21000)
-#define DAVINCI_PWM0_BASE (0x01C22000)
-#define DAVINCI_PWM1_BASE (0x01C22400)
-#define DAVINCI_PWM2_BASE (0x01C22800)
-#define DAVINCI_SYSTEM_MODULE_BASE (0x01C40000)
-#define DAVINCI_PLL_CNTRL0_BASE (0x01C40800)
-#define DAVINCI_PLL_CNTRL1_BASE (0x01C40C00)
-#define DAVINCI_PWR_SLEEP_CNTRL_BASE (0x01C41000)
-#define DAVINCI_SYSTEM_DFT_BASE (0x01C42000)
-#define DAVINCI_IEEE1394_BASE (0x01C60000)
-#define DAVINCI_USB_OTG_BASE (0x01C64000)
-#define DAVINCI_CFC_ATA_BASE (0x01C66000)
-#define DAVINCI_SPI_BASE (0x01C66800)
-#define DAVINCI_GPIO_BASE (0x01C67000)
-#define DAVINCI_UHPI_BASE (0x01C67800)
-#define DAVINCI_VPSS_REGS_BASE (0x01C70000)
-#define DAVINCI_EMAC_CNTRL_REGS_BASE (0x01C80000)
-#define DAVINCI_EMAC_WRAPPER_CNTRL_REGS_BASE (0x01C81000)
-#define DAVINCI_EMAC_WRAPPER_RAM_BASE (0x01C82000)
-#define DAVINCI_MDIO_CNTRL_REGS_BASE (0x01C84000)
-#define DAVINCI_IMCOP_BASE (0x01CC0000)
-#define DAVINCI_ASYNC_EMIF_CNTRL_BASE (0x01E00000)
-#define DAVINCI_VLYNQ_BASE (0x01E01000)
-#define DAVINCI_MCBSP_BASE (0x01E02000)
-#define DAVINCI_MMC_SD_BASE (0x01E10000)
-#define DAVINCI_MS_BASE (0x01E20000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE0_BASE (0x02000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE1_BASE (0x04000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE2_BASE (0x06000000)
-#define DAVINCI_ASYNC_EMIF_DATA_CE3_BASE (0x08000000)
-#define DAVINCI_VLYNQ_REMOTE_BASE (0x0C000000)
+#define DAVINCI_SYSTEM_MODULE_BASE 0x01C40000
+
+/* System control register offsets */
+#define DM64XX_VDD3P3V_PWDN 0x48
#endif /* __ASM_ARCH_HARDWARE_H */
diff --git a/arch/arm/mach-davinci/include/mach/io.h b/arch/arm/mach-davinci/include/mach/io.h
index a48795fd241..2479785405a 100644
--- a/arch/arm/mach-davinci/include/mach/io.h
+++ b/arch/arm/mach-davinci/include/mach/io.h
@@ -40,22 +40,12 @@
#else
#define IOMEM(x) ((void __force __iomem *)(x))
-/*
- * Functions to access the DaVinci IO region
- *
- * NOTE: - Use davinci_read/write[bwl] for physical register addresses
- * - Use __raw_read/write[bwl]() for virtual register addresses
- * - Use IO_ADDRESS(phys_addr) to convert registers to virtual addresses
- * - DO NOT use hardcoded virtual addresses to allow changing the
- * IO address space again if needed
- */
-#define davinci_readb(a) __raw_readb(IO_ADDRESS(a))
-#define davinci_readw(a) __raw_readw(IO_ADDRESS(a))
-#define davinci_readl(a) __raw_readl(IO_ADDRESS(a))
+#define __arch_ioremap(p, s, t) davinci_ioremap(p, s, t)
+#define __arch_iounmap(v) davinci_iounmap(v)
-#define davinci_writeb(v, a) __raw_writeb(v, IO_ADDRESS(a))
-#define davinci_writew(v, a) __raw_writew(v, IO_ADDRESS(a))
-#define davinci_writel(v, a) __raw_writel(v, IO_ADDRESS(a))
+void __iomem *davinci_ioremap(unsigned long phys, size_t size,
+ unsigned int type);
+void davinci_iounmap(volatile void __iomem *addr);
#endif /* __ASSEMBLER__ */
#endif /* __ASM_ARCH_IO_H */
diff --git a/arch/arm/mach-davinci/include/mach/irqs.h b/arch/arm/mach-davinci/include/mach/irqs.h
index f4c5ca6da9f..18066074c99 100644
--- a/arch/arm/mach-davinci/include/mach/irqs.h
+++ b/arch/arm/mach-davinci/include/mach/irqs.h
@@ -96,10 +96,111 @@
#define IRQ_EMUINT 63
#define DAVINCI_N_AINTC_IRQ 64
-#define DAVINCI_N_GPIO 71
+#define DAVINCI_N_GPIO 104
#define NR_IRQS (DAVINCI_N_AINTC_IRQ + DAVINCI_N_GPIO)
#define ARCH_TIMER_IRQ IRQ_TINT1_TINT34
+/* DaVinci DM6467-specific Interrupts */
+#define IRQ_DM646X_VP_VERTINT0 0
+#define IRQ_DM646X_VP_VERTINT1 1
+#define IRQ_DM646X_VP_VERTINT2 2
+#define IRQ_DM646X_VP_VERTINT3 3
+#define IRQ_DM646X_VP_ERRINT 4
+#define IRQ_DM646X_RESERVED_1 5
+#define IRQ_DM646X_RESERVED_2 6
+#define IRQ_DM646X_WDINT 7
+#define IRQ_DM646X_CRGENINT0 8
+#define IRQ_DM646X_CRGENINT1 9
+#define IRQ_DM646X_TSIFINT0 10
+#define IRQ_DM646X_TSIFINT1 11
+#define IRQ_DM646X_VDCEINT 12
+#define IRQ_DM646X_USBINT 13
+#define IRQ_DM646X_USBDMAINT 14
+#define IRQ_DM646X_PCIINT 15
+#define IRQ_DM646X_TCERRINT2 20
+#define IRQ_DM646X_TCERRINT3 21
+#define IRQ_DM646X_IDE 22
+#define IRQ_DM646X_HPIINT 23
+#define IRQ_DM646X_EMACRXTHINT 24
+#define IRQ_DM646X_EMACRXINT 25
+#define IRQ_DM646X_EMACTXINT 26
+#define IRQ_DM646X_EMACMISCINT 27
+#define IRQ_DM646X_MCASP0TXINT 28
+#define IRQ_DM646X_MCASP0RXINT 29
+#define IRQ_DM646X_RESERVED_3 31
+#define IRQ_DM646X_MCASP1TXINT 32
+#define IRQ_DM646X_VLQINT 38
+#define IRQ_DM646X_UARTINT2 42
+#define IRQ_DM646X_SPINT0 43
+#define IRQ_DM646X_SPINT1 44
+#define IRQ_DM646X_DSP2ARMINT 45
+#define IRQ_DM646X_RESERVED_4 46
+#define IRQ_DM646X_PSCINT 47
+#define IRQ_DM646X_GPIO0 48
+#define IRQ_DM646X_GPIO1 49
+#define IRQ_DM646X_GPIO2 50
+#define IRQ_DM646X_GPIO3 51
+#define IRQ_DM646X_GPIO4 52
+#define IRQ_DM646X_GPIO5 53
+#define IRQ_DM646X_GPIO6 54
+#define IRQ_DM646X_GPIO7 55
+#define IRQ_DM646X_GPIOBNK0 56
+#define IRQ_DM646X_GPIOBNK1 57
+#define IRQ_DM646X_GPIOBNK2 58
+#define IRQ_DM646X_DDRINT 59
+#define IRQ_DM646X_AEMIFINT 60
+
+/* DaVinci DM355-specific Interrupts */
+#define IRQ_DM355_CCDC_VDINT0 0
+#define IRQ_DM355_CCDC_VDINT1 1
+#define IRQ_DM355_CCDC_VDINT2 2
+#define IRQ_DM355_IPIPE_HST 3
+#define IRQ_DM355_H3AINT 4
+#define IRQ_DM355_IPIPE_SDR 5
+#define IRQ_DM355_IPIPEIFINT 6
+#define IRQ_DM355_OSDINT 7
+#define IRQ_DM355_VENCINT 8
+#define IRQ_DM355_IMCOPINT 11
+#define IRQ_DM355_RTOINT 13
+#define IRQ_DM355_TINT4 13
+#define IRQ_DM355_TINT2_TINT12 13
+#define IRQ_DM355_UARTINT2 14
+#define IRQ_DM355_TINT5 14
+#define IRQ_DM355_TINT2_TINT34 14
+#define IRQ_DM355_TINT6 15
+#define IRQ_DM355_TINT3_TINT12 15
+#define IRQ_DM355_SPINT1_0 17
+#define IRQ_DM355_SPINT1_1 18
+#define IRQ_DM355_SPINT2_0 19
+#define IRQ_DM355_SPINT2_1 21
+#define IRQ_DM355_TINT7 22
+#define IRQ_DM355_TINT3_TINT34 22
+#define IRQ_DM355_SDIOINT0 23
+#define IRQ_DM355_MMCINT0 26
+#define IRQ_DM355_MSINT 26
+#define IRQ_DM355_MMCINT1 27
+#define IRQ_DM355_PWMINT3 28
+#define IRQ_DM355_SDIOINT1 31
+#define IRQ_DM355_SPINT0_0 42
+#define IRQ_DM355_SPINT0_1 43
+#define IRQ_DM355_GPIO0 44
+#define IRQ_DM355_GPIO1 45
+#define IRQ_DM355_GPIO2 46
+#define IRQ_DM355_GPIO3 47
+#define IRQ_DM355_GPIO4 48
+#define IRQ_DM355_GPIO5 49
+#define IRQ_DM355_GPIO6 50
+#define IRQ_DM355_GPIO7 51
+#define IRQ_DM355_GPIO8 52
+#define IRQ_DM355_GPIO9 53
+#define IRQ_DM355_GPIOBNK0 54
+#define IRQ_DM355_GPIOBNK1 55
+#define IRQ_DM355_GPIOBNK2 56
+#define IRQ_DM355_GPIOBNK3 57
+#define IRQ_DM355_GPIOBNK4 58
+#define IRQ_DM355_GPIOBNK5 59
+#define IRQ_DM355_GPIOBNK6 60
+
#endif /* __ASM_ARCH_IRQS_H */
diff --git a/arch/arm/mach-davinci/include/mach/mux.h b/arch/arm/mach-davinci/include/mach/mux.h
index c24b6782804..bae22cb3e27 100644
--- a/arch/arm/mach-davinci/include/mach/mux.h
+++ b/arch/arm/mach-davinci/include/mach/mux.h
@@ -1,55 +1,183 @@
/*
- * DaVinci pin multiplexing defines
+ * Table of the DAVINCI register configurations for the PINMUX combinations
*
* Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
*
+ * Based on linux/include/asm-arm/arch-omap/mux.h:
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
*/
-#ifndef __ASM_ARCH_MUX_H
-#define __ASM_ARCH_MUX_H
-
-#define DAVINCI_MUX_AEAW0 0
-#define DAVINCI_MUX_AEAW1 1
-#define DAVINCI_MUX_AEAW2 2
-#define DAVINCI_MUX_AEAW3 3
-#define DAVINCI_MUX_AEAW4 4
-#define DAVINCI_MUX_AECS4 10
-#define DAVINCI_MUX_AECS5 11
-#define DAVINCI_MUX_VLYNQWD0 12
-#define DAVINCI_MUX_VLYNQWD1 13
-#define DAVINCI_MUX_VLSCREN 14
-#define DAVINCI_MUX_VLYNQEN 15
-#define DAVINCI_MUX_HDIREN 16
-#define DAVINCI_MUX_ATAEN 17
-#define DAVINCI_MUX_RGB666 22
-#define DAVINCI_MUX_RGB888 23
-#define DAVINCI_MUX_LOEEN 24
-#define DAVINCI_MUX_LFLDEN 25
-#define DAVINCI_MUX_CWEN 26
-#define DAVINCI_MUX_CFLDEN 27
-#define DAVINCI_MUX_HPIEN 29
-#define DAVINCI_MUX_1394EN 30
-#define DAVINCI_MUX_EMACEN 31
-
-#define DAVINCI_MUX_LEVEL2 32
-#define DAVINCI_MUX_UART0 (DAVINCI_MUX_LEVEL2 + 0)
-#define DAVINCI_MUX_UART1 (DAVINCI_MUX_LEVEL2 + 1)
-#define DAVINCI_MUX_UART2 (DAVINCI_MUX_LEVEL2 + 2)
-#define DAVINCI_MUX_U2FLO (DAVINCI_MUX_LEVEL2 + 3)
-#define DAVINCI_MUX_PWM0 (DAVINCI_MUX_LEVEL2 + 4)
-#define DAVINCI_MUX_PWM1 (DAVINCI_MUX_LEVEL2 + 5)
-#define DAVINCI_MUX_PWM2 (DAVINCI_MUX_LEVEL2 + 6)
-#define DAVINCI_MUX_I2C (DAVINCI_MUX_LEVEL2 + 7)
-#define DAVINCI_MUX_SPI (DAVINCI_MUX_LEVEL2 + 8)
-#define DAVINCI_MUX_MSTK (DAVINCI_MUX_LEVEL2 + 9)
-#define DAVINCI_MUX_ASP (DAVINCI_MUX_LEVEL2 + 10)
-#define DAVINCI_MUX_CLK0 (DAVINCI_MUX_LEVEL2 + 16)
-#define DAVINCI_MUX_CLK1 (DAVINCI_MUX_LEVEL2 + 17)
-#define DAVINCI_MUX_TIMIN (DAVINCI_MUX_LEVEL2 + 18)
-
-extern void davinci_mux_peripheral(unsigned int mux, unsigned int enable);
-
-#endif /* __ASM_ARCH_MUX_H */
+
+#ifndef __INC_MACH_MUX_H
+#define __INC_MACH_MUX_H
+
+/* System module registers */
+#define PINMUX0 0x00
+#define PINMUX1 0x04
+/* dm355 only */
+#define PINMUX2 0x08
+#define PINMUX3 0x0c
+#define PINMUX4 0x10
+#define INTMUX 0x18
+#define EVTMUX 0x1c
+
+struct mux_config {
+ const char *name;
+ const char *mux_reg_name;
+ const unsigned char mux_reg;
+ const unsigned char mask_offset;
+ const unsigned char mask;
+ const unsigned char mode;
+ bool debug;
+};
+
+enum davinci_dm644x_index {
+ /* ATA and HDDIR functions */
+ DM644X_HDIREN,
+ DM644X_ATAEN,
+ DM644X_ATAEN_DISABLE,
+
+ /* HPI functions */
+ DM644X_HPIEN_DISABLE,
+
+ /* AEAW functions */
+ DM644X_AEAW,
+
+ /* Memory Stick */
+ DM644X_MSTK,
+
+ /* I2C */
+ DM644X_I2C,
+
+ /* ASP function */
+ DM644X_MCBSP,
+
+ /* UART1 */
+ DM644X_UART1,
+
+ /* UART2 */
+ DM644X_UART2,
+
+ /* PWM0 */
+ DM644X_PWM0,
+
+ /* PWM1 */
+ DM644X_PWM1,
+
+ /* PWM2 */
+ DM644X_PWM2,
+
+ /* VLYNQ function */
+ DM644X_VLYNQEN,
+ DM644X_VLSCREN,
+ DM644X_VLYNQWD,
+
+ /* EMAC and MDIO function */
+ DM644X_EMACEN,
+
+ /* GPIO3V[0:16] pins */
+ DM644X_GPIO3V,
+
+ /* GPIO pins */
+ DM644X_GPIO0,
+ DM644X_GPIO3,
+ DM644X_GPIO43_44,
+ DM644X_GPIO46_47,
+
+ /* VPBE */
+ DM644X_RGB666,
+
+ /* LCD */
+ DM644X_LOEEN,
+ DM644X_LFLDEN,
+};
+
+enum davinci_dm646x_index {
+ /* ATA function */
+ DM646X_ATAEN,
+
+ /* AUDIO Clock */
+ DM646X_AUDCK1,
+ DM646X_AUDCK0,
+
+ /* CRGEN Control */
+ DM646X_CRGMUX,
+
+ /* VPIF Control */
+ DM646X_STSOMUX_DISABLE,
+ DM646X_STSIMUX_DISABLE,
+ DM646X_PTSOMUX_DISABLE,
+ DM646X_PTSIMUX_DISABLE,
+
+ /* TSIF Control */
+ DM646X_STSOMUX,
+ DM646X_STSIMUX,
+ DM646X_PTSOMUX_PARALLEL,
+ DM646X_PTSIMUX_PARALLEL,
+ DM646X_PTSOMUX_SERIAL,
+ DM646X_PTSIMUX_SERIAL,
+};
+
+enum davinci_dm355_index {
+ /* MMC/SD 0 */
+ DM355_MMCSD0,
+
+ /* MMC/SD 1 */
+ DM355_SD1_CLK,
+ DM355_SD1_CMD,
+ DM355_SD1_DATA3,
+ DM355_SD1_DATA2,
+ DM355_SD1_DATA1,
+ DM355_SD1_DATA0,
+
+ /* I2C */
+ DM355_I2C_SDA,
+ DM355_I2C_SCL,
+
+ /* ASP0 function */
+ DM355_MCBSP0_BDX,
+ DM355_MCBSP0_X,
+ DM355_MCBSP0_BFSX,
+ DM355_MCBSP0_BDR,
+ DM355_MCBSP0_R,
+ DM355_MCBSP0_BFSR,
+
+ /* SPI0 */
+ DM355_SPI0_SDI,
+ DM355_SPI0_SDENA0,
+ DM355_SPI0_SDENA1,
+
+ /* IRQ muxing */
+ DM355_INT_EDMA_CC,
+ DM355_INT_EDMA_TC0_ERR,
+ DM355_INT_EDMA_TC1_ERR,
+
+ /* EDMA event muxing */
+ DM355_EVT8_ASP1_TX,
+ DM355_EVT9_ASP1_RX,
+ DM355_EVT26_MMC0_RX,
+};
+
+#ifdef CONFIG_DAVINCI_MUX
+/* setup pin muxing */
+extern void davinci_mux_init(void);
+extern int davinci_mux_register(const struct mux_config *pins,
+ unsigned long size);
+extern int davinci_cfg_reg(unsigned long reg_cfg);
+#else
+/* boot loader does it all (no warnings from CONFIG_DAVINCI_MUX_WARNINGS) */
+static inline void davinci_mux_init(void) {}
+static inline int davinci_mux_register(const struct mux_config *pins,
+ unsigned long size) { return 0; }
+static inline int davinci_cfg_reg(unsigned long reg_cfg) { return 0; }
+#endif
+
+#endif /* __INC_MACH_MUX_H */
diff --git a/arch/arm/mach-davinci/include/mach/psc.h b/arch/arm/mach-davinci/include/mach/psc.h
index 4977aa071e1..55a90d419fa 100644
--- a/arch/arm/mach-davinci/include/mach/psc.h
+++ b/arch/arm/mach-davinci/include/mach/psc.h
@@ -38,8 +38,6 @@
#define DAVINCI_LPSC_TPTC1 4
#define DAVINCI_LPSC_EMAC 5
#define DAVINCI_LPSC_EMAC_WRAPPER 6
-#define DAVINCI_LPSC_MDIO 7
-#define DAVINCI_LPSC_IEEE1394 8
#define DAVINCI_LPSC_USB 9
#define DAVINCI_LPSC_ATA 10
#define DAVINCI_LPSC_VLYNQ 11
@@ -47,7 +45,6 @@
#define DAVINCI_LPSC_DDR_EMIF 13
#define DAVINCI_LPSC_AEMIF 14
#define DAVINCI_LPSC_MMC_SD 15
-#define DAVINCI_LPSC_MEMSTICK 16
#define DAVINCI_LPSC_McBSP 17
#define DAVINCI_LPSC_I2C 18
#define DAVINCI_LPSC_UART0 19
@@ -73,4 +70,54 @@
#define DAVINCI_LPSC_GEM 39
#define DAVINCI_LPSC_IMCOP 40
+#define DM355_LPSC_TIMER3 5
+#define DM355_LPSC_SPI1 6
+#define DM355_LPSC_MMC_SD1 7
+#define DM355_LPSC_McBSP1 8
+#define DM355_LPSC_PWM3 10
+#define DM355_LPSC_SPI2 11
+#define DM355_LPSC_RTO 12
+#define DM355_LPSC_VPSS_DAC 41
+
+/*
+ * LPSC Assignments
+ */
+#define DM646X_LPSC_ARM 0
+#define DM646X_LPSC_C64X_CPU 1
+#define DM646X_LPSC_HDVICP0 2
+#define DM646X_LPSC_HDVICP1 3
+#define DM646X_LPSC_TPCC 4
+#define DM646X_LPSC_TPTC0 5
+#define DM646X_LPSC_TPTC1 6
+#define DM646X_LPSC_TPTC2 7
+#define DM646X_LPSC_TPTC3 8
+#define DM646X_LPSC_PCI 13
+#define DM646X_LPSC_EMAC 14
+#define DM646X_LPSC_VDCE 15
+#define DM646X_LPSC_VPSSMSTR 16
+#define DM646X_LPSC_VPSSSLV 17
+#define DM646X_LPSC_TSIF0 18
+#define DM646X_LPSC_TSIF1 19
+#define DM646X_LPSC_DDR_EMIF 20
+#define DM646X_LPSC_AEMIF 21
+#define DM646X_LPSC_McASP0 22
+#define DM646X_LPSC_McASP1 23
+#define DM646X_LPSC_CRGEN0 24
+#define DM646X_LPSC_CRGEN1 25
+#define DM646X_LPSC_UART0 26
+#define DM646X_LPSC_UART1 27
+#define DM646X_LPSC_UART2 28
+#define DM646X_LPSC_PWM0 29
+#define DM646X_LPSC_PWM1 30
+#define DM646X_LPSC_I2C 31
+#define DM646X_LPSC_SPI 32
+#define DM646X_LPSC_GPIO 33
+#define DM646X_LPSC_TIMER0 34
+#define DM646X_LPSC_TIMER1 35
+#define DM646X_LPSC_ARM_INTC 45
+
+extern int davinci_psc_is_clk_active(unsigned int id);
+extern void davinci_psc_config(unsigned int domain, unsigned int id,
+ char enable);
+
#endif /* __ASM_ARCH_PSC_H */
diff --git a/arch/arm/mach-davinci/include/mach/serial.h b/arch/arm/mach-davinci/include/mach/serial.h
index fb8cb229bfd..632847d74a1 100644
--- a/arch/arm/mach-davinci/include/mach/serial.h
+++ b/arch/arm/mach-davinci/include/mach/serial.h
@@ -13,8 +13,23 @@
#include <mach/io.h>
-#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
-#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
-#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
+#define DAVINCI_MAX_NR_UARTS 3
+#define DAVINCI_UART0_BASE (IO_PHYS + 0x20000)
+#define DAVINCI_UART1_BASE (IO_PHYS + 0x20400)
+#define DAVINCI_UART2_BASE (IO_PHYS + 0x20800)
+
+#define DM355_UART2_BASE (IO_PHYS + 0x206000)
+
+/* DaVinci UART register offsets */
+#define UART_DAVINCI_PWREMU 0x0c
+#define UART_DM646X_SCR 0x10
+#define UART_DM646X_SCR_TX_WATERMARK 0x08
+
+struct davinci_uart_config {
+ /* Bit field of UARTs present; bit 0 --> UART1 */
+ unsigned int enabled_uarts;
+};
+
+extern void davinci_serial_init(struct davinci_uart_config *);
#endif /* __ASM_ARCH_SERIAL_H */
diff --git a/arch/arm/mach-davinci/io.c b/arch/arm/mach-davinci/io.c
index 299515f70b8..a548abb513e 100644
--- a/arch/arm/mach-davinci/io.c
+++ b/arch/arm/mach-davinci/io.c
@@ -51,7 +51,26 @@ void __init davinci_map_common_io(void)
davinci_check_revision();
}
-void __init davinci_init_common_hw(void)
+#define BETWEEN(p, st, sz) ((p) >= (st) && (p) < ((st) + (sz)))
+#define XLATE(p, pst, vst) ((void __iomem *)((p) - (pst) + (vst)))
+
+/*
+ * Intercept ioremap() requests for addresses in our fixed mapping regions.
+ */
+void __iomem *davinci_ioremap(unsigned long p, size_t size, unsigned int type)
+{
+ if (BETWEEN(p, IO_PHYS, IO_SIZE))
+ return XLATE(p, IO_PHYS, IO_VIRT);
+
+ return __arm_ioremap(p, size, type);
+}
+EXPORT_SYMBOL(davinci_ioremap);
+
+void davinci_iounmap(volatile void __iomem *addr)
{
- davinci_clk_init();
+ unsigned long virt = (unsigned long)addr;
+
+ if (virt >= VMALLOC_START && virt < VMALLOC_END)
+ __iounmap(addr);
}
+EXPORT_SYMBOL(davinci_iounmap);
diff --git a/arch/arm/mach-davinci/irq.c b/arch/arm/mach-davinci/irq.c
index 38021af8359..5a324c90e29 100644
--- a/arch/arm/mach-davinci/irq.c
+++ b/arch/arm/mach-davinci/irq.c
@@ -25,6 +25,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
+#include <mach/cputype.h>
#include <asm/mach/irq.h>
#define IRQ_BIT(irq) ((irq) & 0x1f)
@@ -40,14 +41,18 @@
#define IRQ_INTPRI0_REG_OFFSET 0x0030
#define IRQ_INTPRI7_REG_OFFSET 0x004C
+const u8 *davinci_def_priorities;
+
+#define INTC_BASE IO_ADDRESS(DAVINCI_ARM_INTC_BASE)
+
static inline unsigned int davinci_irq_readl(int offset)
{
- return davinci_readl(DAVINCI_ARM_INTC_BASE + offset);
+ return __raw_readl(INTC_BASE + offset);
}
static inline void davinci_irq_writel(unsigned long value, int offset)
{
- davinci_writel(value, DAVINCI_ARM_INTC_BASE + offset);
+ __raw_writel(value, INTC_BASE + offset);
}
/* Disable interrupt */
@@ -108,9 +113,8 @@ static struct irq_chip davinci_irq_chip_0 = {
.unmask = davinci_unmask_irq,
};
-
/* FIQ are pri 0-1; otherwise 2-7, with 7 lowest priority */
-static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
+static const u8 dm644x_default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
[IRQ_VDINT0] = 2,
[IRQ_VDINT1] = 6,
[IRQ_VDINT2] = 6,
@@ -177,11 +181,149 @@ static const u8 default_priorities[DAVINCI_N_AINTC_IRQ] __initdata = {
[IRQ_EMUINT] = 7,
};
+static const u8 dm646x_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+ [IRQ_DM646X_VP_VERTINT0] = 7,
+ [IRQ_DM646X_VP_VERTINT1] = 7,
+ [IRQ_DM646X_VP_VERTINT2] = 7,
+ [IRQ_DM646X_VP_VERTINT3] = 7,
+ [IRQ_DM646X_VP_ERRINT] = 7,
+ [IRQ_DM646X_RESERVED_1] = 7,
+ [IRQ_DM646X_RESERVED_2] = 7,
+ [IRQ_DM646X_WDINT] = 7,
+ [IRQ_DM646X_CRGENINT0] = 7,
+ [IRQ_DM646X_CRGENINT1] = 7,
+ [IRQ_DM646X_TSIFINT0] = 7,
+ [IRQ_DM646X_TSIFINT1] = 7,
+ [IRQ_DM646X_VDCEINT] = 7,
+ [IRQ_DM646X_USBINT] = 7,
+ [IRQ_DM646X_USBDMAINT] = 7,
+ [IRQ_DM646X_PCIINT] = 7,
+ [IRQ_CCINT0] = 7, /* dma */
+ [IRQ_CCERRINT] = 7, /* dma */
+ [IRQ_TCERRINT0] = 7, /* dma */
+ [IRQ_TCERRINT] = 7, /* dma */
+ [IRQ_DM646X_TCERRINT2] = 7,
+ [IRQ_DM646X_TCERRINT3] = 7,
+ [IRQ_DM646X_IDE] = 7,
+ [IRQ_DM646X_HPIINT] = 7,
+ [IRQ_DM646X_EMACRXTHINT] = 7,
+ [IRQ_DM646X_EMACRXINT] = 7,
+ [IRQ_DM646X_EMACTXINT] = 7,
+ [IRQ_DM646X_EMACMISCINT] = 7,
+ [IRQ_DM646X_MCASP0TXINT] = 7,
+ [IRQ_DM646X_MCASP0RXINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_DM646X_RESERVED_3] = 7,
+ [IRQ_DM646X_MCASP1TXINT] = 7, /* clockevent */
+ [IRQ_TINT0_TINT34] = 7, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_DM646X_VLQINT] = 7,
+ [IRQ_I2C] = 7,
+ [IRQ_UARTINT0] = 7,
+ [IRQ_UARTINT1] = 7,
+ [IRQ_DM646X_UARTINT2] = 7,
+ [IRQ_DM646X_SPINT0] = 7,
+ [IRQ_DM646X_SPINT1] = 7,
+ [IRQ_DM646X_DSP2ARMINT] = 7,
+ [IRQ_DM646X_RESERVED_4] = 7,
+ [IRQ_DM646X_PSCINT] = 7,
+ [IRQ_DM646X_GPIO0] = 7,
+ [IRQ_DM646X_GPIO1] = 7,
+ [IRQ_DM646X_GPIO2] = 7,
+ [IRQ_DM646X_GPIO3] = 7,
+ [IRQ_DM646X_GPIO4] = 7,
+ [IRQ_DM646X_GPIO5] = 7,
+ [IRQ_DM646X_GPIO6] = 7,
+ [IRQ_DM646X_GPIO7] = 7,
+ [IRQ_DM646X_GPIOBNK0] = 7,
+ [IRQ_DM646X_GPIOBNK1] = 7,
+ [IRQ_DM646X_GPIOBNK2] = 7,
+ [IRQ_DM646X_DDRINT] = 7,
+ [IRQ_DM646X_AEMIFINT] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
+
+static const u8 dm355_default_priorities[DAVINCI_N_AINTC_IRQ] = {
+ [IRQ_DM355_CCDC_VDINT0] = 2,
+ [IRQ_DM355_CCDC_VDINT1] = 6,
+ [IRQ_DM355_CCDC_VDINT2] = 6,
+ [IRQ_DM355_IPIPE_HST] = 6,
+ [IRQ_DM355_H3AINT] = 6,
+ [IRQ_DM355_IPIPE_SDR] = 6,
+ [IRQ_DM355_IPIPEIFINT] = 6,
+ [IRQ_DM355_OSDINT] = 7,
+ [IRQ_DM355_VENCINT] = 6,
+ [IRQ_ASQINT] = 6,
+ [IRQ_IMXINT] = 6,
+ [IRQ_USBINT] = 4,
+ [IRQ_DM355_RTOINT] = 4,
+ [IRQ_DM355_UARTINT2] = 7,
+ [IRQ_DM355_TINT6] = 7,
+ [IRQ_CCINT0] = 5, /* dma */
+ [IRQ_CCERRINT] = 5, /* dma */
+ [IRQ_TCERRINT0] = 5, /* dma */
+ [IRQ_TCERRINT] = 5, /* dma */
+ [IRQ_DM355_SPINT2_1] = 7,
+ [IRQ_DM355_TINT7] = 4,
+ [IRQ_DM355_SDIOINT0] = 7,
+ [IRQ_MBXINT] = 7,
+ [IRQ_MBRINT] = 7,
+ [IRQ_MMCINT] = 7,
+ [IRQ_DM355_MMCINT1] = 7,
+ [IRQ_DM355_PWMINT3] = 7,
+ [IRQ_DDRINT] = 7,
+ [IRQ_AEMIFINT] = 7,
+ [IRQ_DM355_SDIOINT1] = 4,
+ [IRQ_TINT0_TINT12] = 2, /* clockevent */
+ [IRQ_TINT0_TINT34] = 2, /* clocksource */
+ [IRQ_TINT1_TINT12] = 7, /* DSP timer */
+ [IRQ_TINT1_TINT34] = 7, /* system tick */
+ [IRQ_PWMINT0] = 7,
+ [IRQ_PWMINT1] = 7,
+ [IRQ_PWMINT2] = 7,
+ [IRQ_I2C] = 3,
+ [IRQ_UARTINT0] = 3,
+ [IRQ_UARTINT1] = 3,
+ [IRQ_DM355_SPINT0_0] = 3,
+ [IRQ_DM355_SPINT0_1] = 3,
+ [IRQ_DM355_GPIO0] = 3,
+ [IRQ_DM355_GPIO1] = 7,
+ [IRQ_DM355_GPIO2] = 4,
+ [IRQ_DM355_GPIO3] = 4,
+ [IRQ_DM355_GPIO4] = 7,
+ [IRQ_DM355_GPIO5] = 7,
+ [IRQ_DM355_GPIO6] = 7,
+ [IRQ_DM355_GPIO7] = 7,
+ [IRQ_DM355_GPIO8] = 7,
+ [IRQ_DM355_GPIO9] = 7,
+ [IRQ_DM355_GPIOBNK0] = 7,
+ [IRQ_DM355_GPIOBNK1] = 7,
+ [IRQ_DM355_GPIOBNK2] = 7,
+ [IRQ_DM355_GPIOBNK3] = 7,
+ [IRQ_DM355_GPIOBNK4] = 7,
+ [IRQ_DM355_GPIOBNK5] = 7,
+ [IRQ_DM355_GPIOBNK6] = 7,
+ [IRQ_COMMTX] = 7,
+ [IRQ_COMMRX] = 7,
+ [IRQ_EMUINT] = 7,
+};
+
/* ARM Interrupt Controller Initialization */
void __init davinci_irq_init(void)
{
unsigned i;
- const u8 *priority = default_priorities;
+
+ if (cpu_is_davinci_dm644x())
+ davinci_def_priorities = dm644x_default_priorities;
+ else if (cpu_is_davinci_dm646x())
+ davinci_def_priorities = dm646x_default_priorities;
+ else if (cpu_is_davinci_dm355())
+ davinci_def_priorities = dm355_default_priorities;
/* Clear all interrupt requests */
davinci_irq_writel(~0x0, FIQ_REG0_OFFSET);
@@ -209,8 +351,8 @@ void __init davinci_irq_init(void)
unsigned j;
u32 pri;
- for (j = 0, pri = 0; j < 32; j += 4, priority++)
- pri |= (*priority & 0x07) << j;
+ for (j = 0, pri = 0; j < 32; j += 4, davinci_def_priorities++)
+ pri |= (*davinci_def_priorities & 0x07) << j;
davinci_irq_writel(pri, i);
}
diff --git a/arch/arm/mach-davinci/mux.c b/arch/arm/mach-davinci/mux.c
index 8ff9d8aca60..bbba0b247a4 100644
--- a/arch/arm/mach-davinci/mux.c
+++ b/arch/arm/mach-davinci/mux.c
@@ -1,41 +1,103 @@
/*
- * DaVinci pin multiplexing configurations
+ * Utility to set the DAVINCI MUX register from a table in mux.h
*
* Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
*
+ * Based on linux/arch/arm/plat-omap/mux.c:
+ * Copyright (C) 2003 - 2005 Nokia Corporation
+ *
+ * Written by Tony Lindgren
+ *
* 2007 (c) MontaVista Software, Inc. This file is licensed under
* the terms of the GNU General Public License version 2. This program
* is licensed "as is" without any warranty of any kind, whether express
* or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
*/
#include <linux/io.h>
+#include <linux/module.h>
#include <linux/spinlock.h>
#include <mach/hardware.h>
-
#include <mach/mux.h>
-/* System control register offsets */
-#define PINMUX0 0x00
-#define PINMUX1 0x04
+static const struct mux_config *mux_table;
+static unsigned long pin_table_sz;
+
+int __init davinci_mux_register(const struct mux_config *pins,
+ unsigned long size)
+{
+ mux_table = pins;
+ pin_table_sz = size;
-static DEFINE_SPINLOCK(mux_lock);
+ return 0;
+}
-void davinci_mux_peripheral(unsigned int mux, unsigned int enable)
+/*
+ * Sets the DAVINCI MUX register based on the table
+ */
+int __init_or_module davinci_cfg_reg(const unsigned long index)
{
- u32 pinmux, muxreg = PINMUX0;
+ static DEFINE_SPINLOCK(mux_spin_lock);
+ void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+ unsigned long flags;
+ const struct mux_config *cfg;
+ unsigned int reg_orig = 0, reg = 0;
+ unsigned int mask, warn = 0;
+
+ if (!mux_table)
+ BUG();
+
+ if (index >= pin_table_sz) {
+ printk(KERN_ERR "Invalid pin mux index: %lu (%lu)\n",
+ index, pin_table_sz);
+ dump_stack();
+ return -ENODEV;
+ }
+
+ cfg = &mux_table[index];
+
+ if (cfg->name == NULL) {
+ printk(KERN_ERR "No entry for the specified index\n");
+ return -ENODEV;
+ }
+
+ /* Update the mux register in question */
+ if (cfg->mask) {
+ unsigned tmp1, tmp2;
+
+ spin_lock_irqsave(&mux_spin_lock, flags);
+ reg_orig = __raw_readl(base + cfg->mux_reg);
+
+ mask = (cfg->mask << cfg->mask_offset);
+ tmp1 = reg_orig & mask;
+ reg = reg_orig & ~mask;
+
+ tmp2 = (cfg->mode << cfg->mask_offset);
+ reg |= tmp2;
+
+ if (tmp1 != tmp2)
+ warn = 1;
+
+ __raw_writel(reg, base + cfg->mux_reg);
+ spin_unlock_irqrestore(&mux_spin_lock, flags);
+ }
+
+ if (warn) {
+#ifdef CONFIG_DAVINCI_MUX_WARNINGS
+ printk(KERN_WARNING "MUX: initialized %s\n", cfg->name);
+#endif
+ }
- if (mux >= DAVINCI_MUX_LEVEL2) {
- muxreg = PINMUX1;
- mux -= DAVINCI_MUX_LEVEL2;
+#ifdef CONFIG_DAVINCI_MUX_DEBUG
+ if (cfg->debug || warn) {
+ printk(KERN_WARNING "MUX: Setting register %s\n", cfg->name);
+ printk(KERN_WARNING " %s (0x%08x) = 0x%08x -> 0x%08x\n",
+ cfg->mux_reg_name, cfg->mux_reg, reg_orig, reg);
}
+#endif
- spin_lock(&mux_lock);
- pinmux = davinci_readl(DAVINCI_SYSTEM_MODULE_BASE + muxreg);
- if (enable)
- pinmux |= (1 << mux);
- else
- pinmux &= ~(1 << mux);
- davinci_writel(pinmux, DAVINCI_SYSTEM_MODULE_BASE + muxreg);
- spin_unlock(&mux_lock);
+ return 0;
}
+EXPORT_SYMBOL(davinci_cfg_reg);
diff --git a/arch/arm/mach-davinci/mux.h b/arch/arm/mach-davinci/mux.h
new file mode 100644
index 00000000000..adc86941337
--- /dev/null
+++ b/arch/arm/mach-davinci/mux.h
@@ -0,0 +1,51 @@
+/*
+ * Pin-multiplex helper macros for TI DaVinci family devices
+ *
+ * Author: Vladimir Barinov, MontaVista Software, Inc. <source@mvista.com>
+ *
+ * 2007 (c) MontaVista Software, Inc. This file is licensed under
+ * the terms of the GNU General Public License version 2. This program
+ * is licensed "as is" without any warranty of any kind, whether express
+ * or implied.
+ *
+ * Copyright (C) 2008 Texas Instruments.
+ */
+#ifndef _MACH_DAVINCI_MUX_H_
+#define _MACH_DAVINCI_MUX_H_
+
+#include <mach/mux.h>
+
+#define MUX_CFG(soc, desc, muxreg, mode_offset, mode_mask, mux_mode, dbg)\
+[soc##_##desc] = { \
+ .name = #desc, \
+ .debug = dbg, \
+ .mux_reg_name = "PINMUX"#muxreg, \
+ .mux_reg = PINMUX##muxreg, \
+ .mask_offset = mode_offset, \
+ .mask = mode_mask, \
+ .mode = mux_mode, \
+ },
+
+#define INT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \
+[soc##_##desc] = { \
+ .name = #desc, \
+ .debug = dbg, \
+ .mux_reg_name = "INTMUX", \
+ .mux_reg = INTMUX, \
+ .mask_offset = mode_offset, \
+ .mask = mode_mask, \
+ .mode = mux_mode, \
+ },
+
+#define EVT_CFG(soc, desc, mode_offset, mode_mask, mux_mode, dbg) \
+[soc##_##desc] = { \
+ .name = #desc, \
+ .debug = dbg, \
+ .mux_reg_name = "EVTMUX", \
+ .mux_reg = EVTMUX, \
+ .mask_offset = mode_offset, \
+ .mask = mode_mask, \
+ .mode = mux_mode, \
+ },
+
+#endif /* _MACH_DAVINCI_MUX_H */
diff --git a/arch/arm/mach-davinci/psc.c b/arch/arm/mach-davinci/psc.c
index 58754f066d5..84171abf5f7 100644
--- a/arch/arm/mach-davinci/psc.c
+++ b/arch/arm/mach-davinci/psc.c
@@ -23,10 +23,13 @@
#include <linux/init.h>
#include <linux/io.h>
+#include <mach/cputype.h>
#include <mach/hardware.h>
#include <mach/psc.h>
#include <mach/mux.h>
+#define DAVINCI_PWR_SLEEP_CNTRL_BASE 0x01C41000
+
/* PSC register offsets */
#define EPCPR 0x070
#define PTCMD 0x120
@@ -36,102 +39,61 @@
#define MDSTAT 0x800
#define MDCTL 0xA00
-/* System control register offsets */
-#define VDD3P3V_PWDN 0x48
+#define MDSTAT_STATE_MASK 0x1f
-static void davinci_psc_mux(unsigned int id)
+/* Return nonzero iff the domain's clock is active */
+int __init davinci_psc_is_clk_active(unsigned int id)
{
- switch (id) {
- case DAVINCI_LPSC_ATA:
- davinci_mux_peripheral(DAVINCI_MUX_HDIREN, 1);
- davinci_mux_peripheral(DAVINCI_MUX_ATAEN, 1);
- break;
- case DAVINCI_LPSC_MMC_SD:
- /* VDD power manupulations are done in U-Boot for CPMAC
- * so applies to MMC as well
- */
- /*Set up the pull regiter for MMC */
- davinci_writel(0, DAVINCI_SYSTEM_MODULE_BASE + VDD3P3V_PWDN);
- davinci_mux_peripheral(DAVINCI_MUX_MSTK, 0);
- break;
- case DAVINCI_LPSC_I2C:
- davinci_mux_peripheral(DAVINCI_MUX_I2C, 1);
- break;
- case DAVINCI_LPSC_McBSP:
- davinci_mux_peripheral(DAVINCI_MUX_ASP, 1);
- break;
- default:
- break;
- }
+ void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+ u32 mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+
+ /* if clocked, state can be "Enable" or "SyncReset" */
+ return mdstat & BIT(12);
}
/* Enable or disable a PSC domain */
void davinci_psc_config(unsigned int domain, unsigned int id, char enable)
{
- u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl, mdstat_mask;
+ u32 epcpr, ptcmd, ptstat, pdstat, pdctl1, mdstat, mdctl;
+ void __iomem *psc_base = IO_ADDRESS(DAVINCI_PWR_SLEEP_CNTRL_BASE);
+ u32 next_state = enable ? 0x3 : 0x2; /* 0x3 enables, 0x2 disables */
- mdctl = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
- if (enable)
- mdctl |= 0x00000003; /* Enable Module */
- else
- mdctl &= 0xFFFFFFF2; /* Disable Module */
- davinci_writel(mdctl, DAVINCI_PWR_SLEEP_CNTRL_BASE + MDCTL + 4 * id);
+ mdctl = __raw_readl(psc_base + MDCTL + 4 * id);
+ mdctl &= ~MDSTAT_STATE_MASK;
+ mdctl |= next_state;
+ __raw_writel(mdctl, psc_base + MDCTL + 4 * id);
- pdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDSTAT);
+ pdstat = __raw_readl(psc_base + PDSTAT);
if ((pdstat & 0x00000001) == 0) {
- pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ pdctl1 = __raw_readl(psc_base + PDCTL1);
pdctl1 |= 0x1;
- davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ __raw_writel(pdctl1, psc_base + PDCTL1);
ptcmd = 1 << domain;
- davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD);
+ __raw_writel(ptcmd, psc_base + PTCMD);
do {
- epcpr = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
- EPCPR);
+ epcpr = __raw_readl(psc_base + EPCPR);
} while ((((epcpr >> domain) & 1) == 0));
- pdctl1 = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ pdctl1 = __raw_readl(psc_base + PDCTL1);
pdctl1 |= 0x100;
- davinci_writel(pdctl1, DAVINCI_PWR_SLEEP_CNTRL_BASE + PDCTL1);
+ __raw_writel(pdctl1, psc_base + PDCTL1);
do {
- ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
+ ptstat = __raw_readl(psc_base +
PTSTAT);
} while (!(((ptstat >> domain) & 1) == 0));
} else {
ptcmd = 1 << domain;
- davinci_writel(ptcmd, DAVINCI_PWR_SLEEP_CNTRL_BASE + PTCMD);
+ __raw_writel(ptcmd, psc_base + PTCMD);
do {
- ptstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
- PTSTAT);
+ ptstat = __raw_readl(psc_base + PTSTAT);
} while (!(((ptstat >> domain) & 1) == 0));
}
- if (enable)
- mdstat_mask = 0x3;
- else
- mdstat_mask = 0x2;
-
do {
- mdstat = davinci_readl(DAVINCI_PWR_SLEEP_CNTRL_BASE +
- MDSTAT + 4 * id);
- } while (!((mdstat & 0x0000001F) == mdstat_mask));
-
- if (enable)
- davinci_psc_mux(id);
-}
-
-void __init davinci_psc_init(void)
-{
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSMSTR, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_VPSSSLV, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPCC, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC0, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TPTC1, 1);
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_GPIO, 1);
-
- /* Turn on WatchDog timer LPSC. Needed for RESET to work */
- davinci_psc_config(DAVINCI_GPSC_ARMDOMAIN, DAVINCI_LPSC_TIMER2, 1);
+ mdstat = __raw_readl(psc_base + MDSTAT + 4 * id);
+ } while (!((mdstat & MDSTAT_STATE_MASK) == next_state));
}
diff --git a/arch/arm/mach-davinci/serial.c b/arch/arm/mach-davinci/serial.c
index 3010f997125..69507579652 100644
--- a/arch/arm/mach-davinci/serial.c
+++ b/arch/arm/mach-davinci/serial.c
@@ -32,32 +32,47 @@
#include <mach/hardware.h>
#include <mach/serial.h>
#include <mach/irqs.h>
+#include <mach/cputype.h>
+#include "clock.h"
-#define UART_DAVINCI_PWREMU 0x0c
-
-static inline unsigned int davinci_serial_in(struct plat_serial8250_port *up,
- int offset)
+static inline unsigned int serial_read_reg(struct plat_serial8250_port *up,
+ int offset)
{
offset <<= up->regshift;
- return (unsigned int)__raw_readb(up->membase + offset);
+ return (unsigned int)__raw_readl(IO_ADDRESS(up->mapbase) + offset);
}
-static inline void davinci_serial_outp(struct plat_serial8250_port *p,
- int offset, int value)
+static inline void serial_write_reg(struct plat_serial8250_port *p, int offset,
+ int value)
{
offset <<= p->regshift;
- __raw_writeb(value, p->membase + offset);
+ __raw_writel(value, IO_ADDRESS(p->mapbase) + offset);
}
static struct plat_serial8250_port serial_platform_data[] = {
{
- .membase = (char *)IO_ADDRESS(DAVINCI_UART0_BASE),
- .mapbase = (unsigned long)DAVINCI_UART0_BASE,
+ .mapbase = DAVINCI_UART0_BASE,
.irq = IRQ_UARTINT0,
- .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART1_BASE,
+ .irq = IRQ_UARTINT1,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
+ .iotype = UPIO_MEM,
+ .regshift = 2,
+ },
+ {
+ .mapbase = DAVINCI_UART2_BASE,
+ .irq = IRQ_UARTINT2,
+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST |
+ UPF_IOREMAP,
.iotype = UPIO_MEM,
.regshift = 2,
- .uartclk = 27000000,
},
{
.flags = 0
@@ -74,22 +89,68 @@ static struct platform_device serial_device = {
static void __init davinci_serial_reset(struct plat_serial8250_port *p)
{
- /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
unsigned int pwremu = 0;
- davinci_serial_outp(p, UART_IER, 0); /* disable all interrupts */
+ serial_write_reg(p, UART_IER, 0); /* disable all interrupts */
- davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
+ /* reset both transmitter and receiver: bits 14,13 = UTRST, URRST */
+ serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
mdelay(10);
pwremu |= (0x3 << 13);
pwremu |= 0x1;
- davinci_serial_outp(p, UART_DAVINCI_PWREMU, pwremu);
+ serial_write_reg(p, UART_DAVINCI_PWREMU, pwremu);
+
+ if (cpu_is_davinci_dm646x())
+ serial_write_reg(p, UART_DM646X_SCR,
+ UART_DM646X_SCR_TX_WATERMARK);
+}
+
+void __init davinci_serial_init(struct davinci_uart_config *info)
+{
+ int i;
+ char name[16];
+ struct clk *uart_clk;
+ struct device *dev = &serial_device.dev;
+
+ /*
+ * Make sure the serial ports are muxed on at this point.
+ * You have to mux them off in device drivers later on
+ * if not needed.
+ */
+ for (i = 0; i < DAVINCI_MAX_NR_UARTS; i++) {
+ struct plat_serial8250_port *p = serial_platform_data + i;
+
+ if (!(info->enabled_uarts & (1 << i))) {
+ p->flags = 0;
+ continue;
+ }
+
+ if (cpu_is_davinci_dm646x())
+ p->iotype = UPIO_MEM32;
+
+ if (cpu_is_davinci_dm355()) {
+ if (i == 2) {
+ p->mapbase = (unsigned long)DM355_UART2_BASE;
+ p->irq = IRQ_DM355_UARTINT2;
+ }
+ }
+
+ sprintf(name, "uart%d", i);
+ uart_clk = clk_get(dev, name);
+ if (IS_ERR(uart_clk))
+ printk(KERN_ERR "%s:%d: failed to get UART%d clock\n",
+ __func__, __LINE__, i);
+ else {
+ clk_enable(uart_clk);
+ p->uartclk = clk_get_rate(uart_clk);
+ davinci_serial_reset(p);
+ }
+ }
}
static int __init davinci_init(void)
{
- davinci_serial_reset(&serial_platform_data[0]);
return platform_device_register(&serial_device);
}
diff --git a/arch/arm/mach-davinci/time.c b/arch/arm/mach-davinci/time.c
index 6c227d4ba99..494e01bff5c 100644
--- a/arch/arm/mach-davinci/time.c
+++ b/arch/arm/mach-davinci/time.c
@@ -16,6 +16,9 @@
#include <linux/clockchips.h>
#include <linux/spinlock.h>
#include <linux/io.h>
+#include <linux/clk.h>
+#include <linux/err.h>
+#include <linux/device.h>
#include <mach/hardware.h>
#include <asm/system.h>
@@ -24,8 +27,11 @@
#include <asm/mach/time.h>
#include <asm/errno.h>
#include <mach/io.h>
+#include <mach/cputype.h>
+#include "clock.h"
static struct clock_event_device clockevent_davinci;
+static unsigned int davinci_clock_tick_rate;
#define DAVINCI_TIMER0_BASE (IO_PHYS + 0x21400)
#define DAVINCI_TIMER1_BASE (IO_PHYS + 0x21800)
@@ -99,9 +105,9 @@ struct timer_s {
unsigned int id;
unsigned long period;
unsigned long opts;
- unsigned long reg_base;
- unsigned long tim_reg;
- unsigned long prd_reg;
+ void __iomem *base;
+ unsigned long tim_off;
+ unsigned long prd_off;
unsigned long enamode_shift;
struct irqaction irqaction;
};
@@ -114,15 +120,15 @@ static struct timer_s timers[];
static int timer32_config(struct timer_s *t)
{
- u32 tcr = davinci_readl(t->reg_base + TCR);
+ u32 tcr = __raw_readl(t->base + TCR);
/* disable timer */
tcr &= ~(TCR_ENAMODE_MASK << t->enamode_shift);
- davinci_writel(tcr, t->reg_base + TCR);
+ __raw_writel(tcr, t->base + TCR);
/* reset counter to zero, set new period */
- davinci_writel(0, t->tim_reg);
- davinci_writel(t->period, t->prd_reg);
+ __raw_writel(0, t->base + t->tim_off);
+ __raw_writel(t->period, t->base + t->prd_off);
/* Set enable mode */
if (t->opts & TIMER_OPTS_ONESHOT) {
@@ -131,13 +137,13 @@ static int timer32_config(struct timer_s *t)
tcr |= TCR_ENAMODE_PERIODIC << t->enamode_shift;
}
- davinci_writel(tcr, t->reg_base + TCR);
+ __raw_writel(tcr, t->base + TCR);
return 0;
}
static inline u32 timer32_read(struct timer_s *t)
{
- return davinci_readl(t->tim_reg);
+ return __raw_readl(t->base + t->tim_off);
}
static irqreturn_t timer_interrupt(int irq, void *dev_id)
@@ -176,51 +182,54 @@ static struct timer_s timers[] = {
static void __init timer_init(void)
{
- u32 bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
+ u32 phys_bases[] = {DAVINCI_TIMER0_BASE, DAVINCI_TIMER1_BASE};
int i;
/* Global init of each 64-bit timer as a whole */
for(i=0; i<2; i++) {
- u32 tgcr, base = bases[i];
+ u32 tgcr;
+ void __iomem *base = IO_ADDRESS(phys_bases[i]);
/* Disabled, Internal clock source */
- davinci_writel(0, base + TCR);
+ __raw_writel(0, base + TCR);
/* reset both timers, no pre-scaler for timer34 */
tgcr = 0;
- davinci_writel(tgcr, base + TGCR);
+ __raw_writel(tgcr, base + TGCR);
/* Set both timers to unchained 32-bit */
tgcr = TGCR_TIMMODE_32BIT_UNCHAINED << TGCR_TIMMODE_SHIFT;
- davinci_writel(tgcr, base + TGCR);
+ __raw_writel(tgcr, base + TGCR);
/* Unreset timers */
tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
- davinci_writel(tgcr, base + TGCR);
+ __raw_writel(tgcr, base + TGCR);
/* Init both counters to zero */
- davinci_writel(0, base + TIM12);
- davinci_writel(0, base + TIM34);
+ __raw_writel(0, base + TIM12);
+ __raw_writel(0, base + TIM34);
}
/* Init of each timer as a 32-bit timer */
for (i=0; i< ARRAY_SIZE(timers); i++) {
struct timer_s *t = &timers[i];
+ u32 phys_base;
if (t->name) {
t->id = i;
- t->reg_base = (IS_TIMER1(t->id) ?
+ phys_base = (IS_TIMER1(t->id) ?
DAVINCI_TIMER1_BASE : DAVINCI_TIMER0_BASE);
+ t->base = IO_ADDRESS(phys_base);
if (IS_TIMER_BOT(t->id)) {
t->enamode_shift = 6;
- t->tim_reg = t->reg_base + TIM12;
- t->prd_reg = t->reg_base + PRD12;
+ t->tim_off = TIM12;
+ t->prd_off = PRD12;
} else {
t->enamode_shift = 22;
- t->tim_reg = t->reg_base + TIM34;
- t->prd_reg = t->reg_base + PRD34;
+ t->tim_off = TIM34;
+ t->prd_off = PRD34;
}
/* Register interrupt */
@@ -274,7 +283,7 @@ static void davinci_set_mode(enum clock_event_mode mode,
switch (mode) {
case CLOCK_EVT_MODE_PERIODIC:
- t->period = CLOCK_TICK_RATE / (HZ);
+ t->period = davinci_clock_tick_rate / (HZ);
t->opts = TIMER_OPTS_PERIODIC;
timer32_config(t);
break;
@@ -301,21 +310,29 @@ static struct clock_event_device clockevent_davinci = {
static void __init davinci_timer_init(void)
{
+ struct clk *timer_clk;
+
static char err[] __initdata = KERN_ERR
"%s: can't register clocksource!\n";
/* init timer hw */
timer_init();
+ timer_clk = clk_get(NULL, "timer0");
+ BUG_ON(IS_ERR(timer_clk));
+ clk_enable(timer_clk);
+
+ davinci_clock_tick_rate = clk_get_rate(timer_clk);
+
/* setup clocksource */
clocksource_davinci.mult =
- clocksource_khz2mult(CLOCK_TICK_RATE/1000,
+ clocksource_khz2mult(davinci_clock_tick_rate/1000,
clocksource_davinci.shift);
if (clocksource_register(&clocksource_davinci))
printk(err, clocksource_davinci.name);
/* setup clockevent */
- clockevent_davinci.mult = div_sc(CLOCK_TICK_RATE, NSEC_PER_SEC,
+ clockevent_davinci.mult = div_sc(davinci_clock_tick_rate, NSEC_PER_SEC,
clockevent_davinci.shift);
clockevent_davinci.max_delta_ns =
clockevent_delta2ns(0xfffffffe, &clockevent_davinci);
@@ -333,42 +350,52 @@ struct sys_timer davinci_timer = {
/* reset board using watchdog timer */
void davinci_watchdog_reset(void) {
- u32 tgcr, wdtcr, base = DAVINCI_WDOG_BASE;
+ u32 tgcr, wdtcr;
+ void __iomem *base = IO_ADDRESS(DAVINCI_WDOG_BASE);
+ struct device dev;
+ struct clk *wd_clk;
+ char *name = "watchdog";
+
+ dev_set_name(&dev, name);
+ wd_clk = clk_get(&dev, NULL);
+ if (WARN_ON(IS_ERR(wd_clk)))
+ return;
+ clk_enable(wd_clk);
/* disable, internal clock source */
- davinci_writel(0, base + TCR);
+ __raw_writel(0, base + TCR);
/* reset timer, set mode to 64-bit watchdog, and unreset */
tgcr = 0;
- davinci_writel(tgcr, base + TCR);
+ __raw_writel(tgcr, base + TCR);
tgcr = TGCR_TIMMODE_64BIT_WDOG << TGCR_TIMMODE_SHIFT;
tgcr |= (TGCR_UNRESET << TGCR_TIM12RS_SHIFT) |
(TGCR_UNRESET << TGCR_TIM34RS_SHIFT);
- davinci_writel(tgcr, base + TCR);
+ __raw_writel(tgcr, base + TCR);
/* clear counter and period regs */
- davinci_writel(0, base + TIM12);
- davinci_writel(0, base + TIM34);
- davinci_writel(0, base + PRD12);
- davinci_writel(0, base + PRD34);
+ __raw_writel(0, base + TIM12);
+ __raw_writel(0, base + TIM34);
+ __raw_writel(0, base + PRD12);
+ __raw_writel(0, base + PRD34);
/* enable */
- wdtcr = davinci_readl(base + WDTCR);
+ wdtcr = __raw_readl(base + WDTCR);
wdtcr |= WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT;
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
/* put watchdog in pre-active state */
wdtcr = (WDTCR_WDKEY_SEQ0 << WDTCR_WDKEY_SHIFT) |
(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
/* put watchdog in active state */
wdtcr = (WDTCR_WDKEY_SEQ1 << WDTCR_WDKEY_SHIFT) |
(WDTCR_WDEN_ENABLE << WDTCR_WDEN_SHIFT);
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
/* write an invalid value to the WDKEY field to trigger
* a watchdog reset */
wdtcr = 0x00004000;
- davinci_writel(wdtcr, base + WDTCR);
+ __raw_writel(wdtcr, base + WDTCR);
}
diff --git a/arch/arm/mach-davinci/usb.c b/arch/arm/mach-davinci/usb.c
index 2429b79f6da..abedb633718 100644
--- a/arch/arm/mach-davinci/usb.c
+++ b/arch/arm/mach-davinci/usb.c
@@ -14,6 +14,8 @@
#include <mach/hardware.h>
#include <mach/irqs.h>
+#define DAVINCI_USB_OTG_BASE 0x01C64000
+
#if defined(CONFIG_USB_MUSB_HDRC) || defined(CONFIG_USB_MUSB_HDRC_MODULE)
static struct musb_hdrc_eps_bits musb_eps[] = {
{ "ep1_tx", 8, },
diff --git a/arch/arm/mach-ep93xx/clock.c b/arch/arm/mach-ep93xx/clock.c
index e8ebeaea6c4..b2eede5531c 100644
--- a/arch/arm/mach-ep93xx/clock.c
+++ b/arch/arm/mach-ep93xx/clock.c
@@ -21,15 +21,50 @@
#include <asm/div64.h>
#include <mach/hardware.h>
+
+/*
+ * The EP93xx has two external crystal oscillators. To generate the
+ * required high-frequency clocks, the processor uses two phase-locked-
+ * loops (PLLs) to multiply the incoming external clock signal to much
+ * higher frequencies that are then divided down by programmable dividers
+ * to produce the needed clocks. The PLLs operate independently of one
+ * another.
+ */
+#define EP93XX_EXT_CLK_RATE 14745600
+#define EP93XX_EXT_RTC_RATE 32768
+
+
struct clk {
unsigned long rate;
int users;
+ int sw_locked;
u32 enable_reg;
u32 enable_mask;
+
+ unsigned long (*get_rate)(struct clk *clk);
};
-static struct clk clk_uart = {
- .rate = 14745600,
+
+static unsigned long get_uart_rate(struct clk *clk);
+
+
+static struct clk clk_uart1 = {
+ .sw_locked = 1,
+ .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
+ .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U1EN,
+ .get_rate = get_uart_rate,
+};
+static struct clk clk_uart2 = {
+ .sw_locked = 1,
+ .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
+ .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U2EN,
+ .get_rate = get_uart_rate,
+};
+static struct clk clk_uart3 = {
+ .sw_locked = 1,
+ .enable_reg = EP93XX_SYSCON_DEVICE_CONFIG,
+ .enable_mask = EP93XX_SYSCON_DEVICE_CONFIG_U3EN,
+ .get_rate = get_uart_rate,
};
static struct clk clk_pll1;
static struct clk clk_f;
@@ -95,9 +130,9 @@ static struct clk clk_m2m1 = {
{ .dev_id = dev, .con_id = con, .clk = ck }
static struct clk_lookup clocks[] = {
- INIT_CK("apb:uart1", NULL, &clk_uart),
- INIT_CK("apb:uart2", NULL, &clk_uart),
- INIT_CK("apb:uart3", NULL, &clk_uart),
+ INIT_CK("apb:uart1", NULL, &clk_uart1),
+ INIT_CK("apb:uart2", NULL, &clk_uart2),
+ INIT_CK("apb:uart3", NULL, &clk_uart3),
INIT_CK(NULL, "pll1", &clk_pll1),
INIT_CK(NULL, "fclk", &clk_f),
INIT_CK(NULL, "hclk", &clk_h),
@@ -125,6 +160,8 @@ int clk_enable(struct clk *clk)
u32 value;
value = __raw_readl(clk->enable_reg);
+ if (clk->sw_locked)
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
__raw_writel(value | clk->enable_mask, clk->enable_reg);
}
@@ -138,13 +175,29 @@ void clk_disable(struct clk *clk)
u32 value;
value = __raw_readl(clk->enable_reg);
+ if (clk->sw_locked)
+ __raw_writel(0xaa, EP93XX_SYSCON_SWLOCK);
__raw_writel(value & ~clk->enable_mask, clk->enable_reg);
}
}
EXPORT_SYMBOL(clk_disable);
+static unsigned long get_uart_rate(struct clk *clk)
+{
+ u32 value;
+
+ value = __raw_readl(EP93XX_SYSCON_CLOCK_CONTROL);
+ if (value & EP93XX_SYSCON_CLOCK_UARTBAUD)
+ return EP93XX_EXT_CLK_RATE;
+ else
+ return EP93XX_EXT_CLK_RATE / 2;
+}
+
unsigned long clk_get_rate(struct clk *clk)
{
+ if (clk->get_rate)
+ return clk->get_rate(clk);
+
return clk->rate;
}
EXPORT_SYMBOL(clk_get_rate);
@@ -162,7 +215,7 @@ static unsigned long calc_pll_rate(u32 config_word)
unsigned long long rate;
int i;
- rate = 14745600;
+ rate = EP93XX_EXT_CLK_RATE;
rate *= ((config_word >> 11) & 0x1f) + 1; /* X1FBD */
rate *= ((config_word >> 5) & 0x3f) + 1; /* X2FBD */
do_div(rate, (config_word & 0x1f) + 1); /* X2IPD */
@@ -195,7 +248,7 @@ static int __init ep93xx_clock_init(void)
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET1);
if (!(value & 0x00800000)) { /* PLL1 bypassed? */
- clk_pll1.rate = 14745600;
+ clk_pll1.rate = EP93XX_EXT_CLK_RATE;
} else {
clk_pll1.rate = calc_pll_rate(value);
}
@@ -206,7 +259,7 @@ static int __init ep93xx_clock_init(void)
value = __raw_readl(EP93XX_SYSCON_CLOCK_SET2);
if (!(value & 0x00080000)) { /* PLL2 bypassed? */
- clk_pll2.rate = 14745600;
+ clk_pll2.rate = EP93XX_EXT_CLK_RATE;
} else if (value & 0x00040000) { /* PLL2 enabled? */
clk_pll2.rate = calc_pll_rate(value);
} else {
diff --git a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
index f66be12b856..1732de7629a 100644
--- a/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
+++ b/arch/arm/mach-ep93xx/include/mach/ep93xx-regs.h
@@ -159,7 +159,10 @@
#define EP93XX_SYSCON_CLOCK_SET1 EP93XX_SYSCON_REG(0x20)
#define EP93XX_SYSCON_CLOCK_SET2 EP93XX_SYSCON_REG(0x24)
#define EP93XX_SYSCON_DEVICE_CONFIG EP93XX_SYSCON_REG(0x80)
-#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE 0x00800000
+#define EP93XX_SYSCON_DEVICE_CONFIG_U3EN (1<<24)
+#define EP93XX_SYSCON_DEVICE_CONFIG_CRUNCH_ENABLE (1<<23)
+#define EP93XX_SYSCON_DEVICE_CONFIG_U2EN (1<<20)
+#define EP93XX_SYSCON_DEVICE_CONFIG_U1EN (1<<18)
#define EP93XX_SYSCON_SWLOCK EP93XX_SYSCON_REG(0xc0)
#define EP93XX_WATCHDOG_BASE (EP93XX_APB_VIRT_BASE + 0x00140000)
diff --git a/arch/arm/mach-integrator/core.c b/arch/arm/mach-integrator/core.c
index 6f887291307..a0f60e55da6 100644
--- a/arch/arm/mach-integrator/core.c
+++ b/arch/arm/mach-integrator/core.c
@@ -121,7 +121,7 @@ static struct clk uartclk = {
.rate = 14745600,
};
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
{ /* UART0 */
.dev_id = "mb:16",
.clk = &uartclk,
diff --git a/arch/arm/mach-ixp4xx/ixp4xx_npe.c b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
index 25231023490..7bb8e778e4b 100644
--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
@@ -714,7 +714,7 @@ static int __init npe_init_module(void)
}
if (!found)
- return -ENOSYS;
+ return -ENODEV;
return 0;
}
diff --git a/arch/arm/mach-l7200/include/mach/sys-clock.h b/arch/arm/mach-l7200/include/mach/sys-clock.h
index 2d7722be60e..e9729a35751 100644
--- a/arch/arm/mach-l7200/include/mach/sys-clock.h
+++ b/arch/arm/mach-l7200/include/mach/sys-clock.h
@@ -18,7 +18,7 @@
/* IO_START and IO_BASE are defined in hardware.h */
-#define SYS_CLOCK_START (IO_START + SYS_CLCOK_OFF) /* Physical address */
+#define SYS_CLOCK_START (IO_START + SYS_CLOCK_OFF) /* Physical address */
#define SYS_CLOCK_BASE (IO_BASE + SYS_CLOCK_OFF) /* Virtual address */
/* Define the interface to the SYS_CLOCK */
diff --git a/arch/arm/mach-omap1/board-h2-mmc.c b/arch/arm/mach-omap1/board-h2-mmc.c
index 44d4a966bed..46098f54682 100644
--- a/arch/arm/mach-omap1/board-h2-mmc.c
+++ b/arch/arm/mach-omap1/board-h2-mmc.c
@@ -26,19 +26,13 @@
static int mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
- if (power_on)
- gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 1);
- else
- gpio_direction_output(H2_TPS_GPIO_MMC_PWR_EN, 0);
-
+ gpio_set_value(H2_TPS_GPIO_MMC_PWR_EN, power_on);
return 0;
}
static int mmc_late_init(struct device *dev)
{
- int ret;
-
- ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
+ int ret = gpio_request(H2_TPS_GPIO_MMC_PWR_EN, "MMC power");
if (ret < 0)
return ret;
@@ -47,7 +41,7 @@ static int mmc_late_init(struct device *dev)
return ret;
}
-static void mmc_shutdown(struct device *dev)
+static void mmc_cleanup(struct device *dev)
{
gpio_free(H2_TPS_GPIO_MMC_PWR_EN);
}
@@ -60,7 +54,7 @@ static void mmc_shutdown(struct device *dev)
static struct omap_mmc_platform_data mmc1_data = {
.nr_slots = 1,
.init = mmc_late_init,
- .shutdown = mmc_shutdown,
+ .cleanup = mmc_cleanup,
.dma_mask = 0xffffffff,
.slots[0] = {
.set_power = mmc_set_power,
diff --git a/arch/arm/mach-omap1/board-h3-mmc.c b/arch/arm/mach-omap1/board-h3-mmc.c
index 0d8a3c195e2..5e8877ce35e 100644
--- a/arch/arm/mach-omap1/board-h3-mmc.c
+++ b/arch/arm/mach-omap1/board-h3-mmc.c
@@ -26,11 +26,7 @@
static int mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
- if (power_on)
- gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 1);
- else
- gpio_direction_output(H3_TPS_GPIO_MMC_PWR_EN, 0);
-
+ gpio_set_value(H3_TPS_GPIO_MMC_PWR_EN, power_on);
return 0;
}
diff --git a/arch/arm/mach-omap1/board-h3.c b/arch/arm/mach-omap1/board-h3.c
index 4695965114c..f597968733b 100644
--- a/arch/arm/mach-omap1/board-h3.c
+++ b/arch/arm/mach-omap1/board-h3.c
@@ -39,12 +39,10 @@
#include <asm/mach/flash.h>
#include <asm/mach/map.h>
-#include <mach/gpioexpander.h>
#include <mach/irqs.h>
#include <mach/mux.h>
#include <mach/tc.h>
#include <mach/nand.h>
-#include <mach/irda.h>
#include <mach/usb.h>
#include <mach/keypad.h>
#include <mach/dma.h>
@@ -276,104 +274,6 @@ static struct platform_device h3_kp_device = {
.resource = h3_kp_resources,
};
-
-/* Select between the IrDA and aGPS module
- */
-static int h3_select_irda(struct device *dev, int state)
-{
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x26))) {
- printk(KERN_ERR "Error reading from I/O EXPANDER \n");
- return err;
- }
-
- /* 'P6' enable/disable IRDA_TX and IRDA_RX */
- if (state & IR_SEL) { /* IrDA */
- if ((err = write_gpio_expa(expa | 0x40, 0x26))) {
- printk(KERN_ERR "Error writing to I/O EXPANDER \n");
- return err;
- }
- } else {
- if ((err = write_gpio_expa(expa & ~0x40, 0x26))) {
- printk(KERN_ERR "Error writing to I/O EXPANDER \n");
- return err;
- }
- }
- return err;
-}
-
-static void set_trans_mode(struct work_struct *work)
-{
- struct omap_irda_config *irda_config =
- container_of(work, struct omap_irda_config, gpio_expa.work);
- int mode = irda_config->mode;
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x27)) != 0) {
- printk(KERN_ERR "Error reading from I/O expander\n");
- }
-
- expa &= ~0x03;
-
- if (mode & IR_SIRMODE) {
- expa |= 0x01;
- } else { /* MIR/FIR */
- expa |= 0x03;
- }
-
- if ((err = write_gpio_expa(expa, 0x27)) != 0) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- }
-}
-
-static int h3_transceiver_mode(struct device *dev, int mode)
-{
- struct omap_irda_config *irda_config = dev->platform_data;
-
- irda_config->mode = mode;
- cancel_delayed_work(&irda_config->gpio_expa);
- PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
- schedule_delayed_work(&irda_config->gpio_expa, 0);
-
- return 0;
-}
-
-static struct omap_irda_config h3_irda_data = {
- .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
- .transceiver_mode = h3_transceiver_mode,
- .select_irda = h3_select_irda,
- .rx_channel = OMAP_DMA_UART3_RX,
- .tx_channel = OMAP_DMA_UART3_TX,
- .dest_start = UART3_THR,
- .src_start = UART3_RHR,
- .tx_trigger = 0,
- .rx_trigger = 0,
-};
-
-static struct resource h3_irda_resources[] = {
- [0] = {
- .start = INT_UART3,
- .end = INT_UART3,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static u64 irda_dmamask = 0xffffffff;
-
-static struct platform_device h3_irda_device = {
- .name = "omapirda",
- .id = 0,
- .dev = {
- .platform_data = &h3_irda_data,
- .dma_mask = &irda_dmamask,
- },
- .num_resources = ARRAY_SIZE(h3_irda_resources),
- .resource = h3_irda_resources,
-};
-
static struct platform_device h3_lcd_device = {
.name = "lcd_h3",
.id = -1,
@@ -395,7 +295,6 @@ static struct platform_device *devices[] __initdata = {
&nand_device,
&smc91x_device,
&intlat_device,
- &h3_irda_device,
&h3_kp_device,
&h3_lcd_device,
};
diff --git a/arch/arm/mach-omap1/board-nokia770.c b/arch/arm/mach-omap1/board-nokia770.c
index 7bc7a3cb9c5..d1ed1365319 100644
--- a/arch/arm/mach-omap1/board-nokia770.c
+++ b/arch/arm/mach-omap1/board-nokia770.c
@@ -181,11 +181,7 @@ static struct omap_usb_config nokia770_usb_config __initdata = {
static int nokia770_mmc_set_power(struct device *dev, int slot, int power_on,
int vdd)
{
- if (power_on)
- gpio_set_value(NOKIA770_GPIO_MMC_POWER, 1);
- else
- gpio_set_value(NOKIA770_GPIO_MMC_POWER, 0);
-
+ gpio_set_value(NOKIA770_GPIO_MMC_POWER, power_on);
return 0;
}
diff --git a/arch/arm/mach-omap1/mcbsp.c b/arch/arm/mach-omap1/mcbsp.c
index d040c3f1027..a2d7814896b 100644
--- a/arch/arm/mach-omap1/mcbsp.c
+++ b/arch/arm/mach-omap1/mcbsp.c
@@ -40,8 +40,8 @@ static void omap1_mcbsp_request(unsigned int id)
*/
if (id == OMAP_MCBSP1 || id == OMAP_MCBSP3) {
if (dsp_use++ == 0) {
- api_clk = clk_get(NULL, "api_clk");
- dsp_clk = clk_get(NULL, "dsp_clk");
+ api_clk = clk_get(NULL, "api_ck");
+ dsp_clk = clk_get(NULL, "dsp_ck");
if (!IS_ERR(api_clk) && !IS_ERR(dsp_clk)) {
clk_enable(api_clk);
clk_enable(dsp_clk);
diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c
index a0267a9ab46..e7d017cdc43 100644
--- a/arch/arm/mach-omap2/board-h4.c
+++ b/arch/arm/mach-omap2/board-h4.c
@@ -33,10 +33,8 @@
#include <mach/control.h>
#include <mach/gpio.h>
-#include <mach/gpioexpander.h>
#include <mach/mux.h>
#include <mach/usb.h>
-#include <mach/irda.h>
#include <mach/board.h>
#include <mach/common.h>
#include <mach/keypad.h>
@@ -138,98 +136,6 @@ static struct platform_device h4_flash_device = {
.resource = &h4_flash_resource,
};
-/* Select between the IrDA and aGPS module
- */
-static int h4_select_irda(struct device *dev, int state)
-{
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x21))) {
- printk(KERN_ERR "Error reading from I/O expander\n");
- return err;
- }
-
- /* 'P6' enable/disable IRDA_TX and IRDA_RX */
- if (state & IR_SEL) { /* IrDa */
- if ((err = write_gpio_expa(expa | 0x01, 0x21))) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- return err;
- }
- } else {
- if ((err = write_gpio_expa(expa & ~0x01, 0x21))) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- return err;
- }
- }
- return err;
-}
-
-static void set_trans_mode(struct work_struct *work)
-{
- struct omap_irda_config *irda_config =
- container_of(work, struct omap_irda_config, gpio_expa.work);
- int mode = irda_config->mode;
- unsigned char expa;
- int err = 0;
-
- if ((err = read_gpio_expa(&expa, 0x20)) != 0) {
- printk(KERN_ERR "Error reading from I/O expander\n");
- }
-
- expa &= ~0x01;
-
- if (!(mode & IR_SIRMODE)) { /* MIR/FIR */
- expa |= 0x01;
- }
-
- if ((err = write_gpio_expa(expa, 0x20)) != 0) {
- printk(KERN_ERR "Error writing to I/O expander\n");
- }
-}
-
-static int h4_transceiver_mode(struct device *dev, int mode)
-{
- struct omap_irda_config *irda_config = dev->platform_data;
-
- irda_config->mode = mode;
- cancel_delayed_work(&irda_config->gpio_expa);
- PREPARE_DELAYED_WORK(&irda_config->gpio_expa, set_trans_mode);
- schedule_delayed_work(&irda_config->gpio_expa, 0);
-
- return 0;
-}
-
-static struct omap_irda_config h4_irda_data = {
- .transceiver_cap = IR_SIRMODE | IR_MIRMODE | IR_FIRMODE,
- .transceiver_mode = h4_transceiver_mode,
- .select_irda = h4_select_irda,
- .rx_channel = OMAP24XX_DMA_UART3_RX,
- .tx_channel = OMAP24XX_DMA_UART3_TX,
- .dest_start = OMAP_UART3_BASE,
- .src_start = OMAP_UART3_BASE,
- .tx_trigger = OMAP24XX_DMA_UART3_TX,
- .rx_trigger = OMAP24XX_DMA_UART3_RX,
-};
-
-static struct resource h4_irda_resources[] = {
- [0] = {
- .start = INT_24XX_UART3_IRQ,
- .end = INT_24XX_UART3_IRQ,
- .flags = IORESOURCE_IRQ,
- },
-};
-
-static struct platform_device h4_irda_device = {
- .name = "omapirda",
- .id = -1,
- .dev = {
- .platform_data = &h4_irda_data,
- },
- .num_resources = 1,
- .resource = h4_irda_resources,
-};
-
static struct omap_kp_platform_data h4_kp_data = {
.rows = 6,
.cols = 7,
@@ -255,7 +161,6 @@ static struct platform_device h4_lcd_device = {
static struct platform_device *h4_devices[] __initdata = {
&h4_flash_device,
- &h4_irda_device,
&h4_kp_device,
&h4_lcd_device,
};
diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c
index 744740ae1b9..3a7a29d1f9a 100644
--- a/arch/arm/mach-omap2/board-omap3beagle.c
+++ b/arch/arm/mach-omap2/board-omap3beagle.c
@@ -42,6 +42,7 @@
#include <mach/nand.h>
#include <mach/mux.h>
#include <mach/usb.h>
+#include <mach/timer-gp.h>
#include "mmc-twl4030.h"
@@ -186,6 +187,9 @@ static void __init omap3_beagle_init_irq(void)
{
omap2_init_common_hw(NULL);
omap_init_irq();
+#ifdef CONFIG_OMAP_32K_TIMER
+ omap2_gp_clockevent_set_gptimer(12);
+#endif
omap_gpio_init();
}
diff --git a/arch/arm/mach-omap2/board-rx51.c b/arch/arm/mach-omap2/board-rx51.c
index 3a0daac6c83..374ff63c3eb 100644
--- a/arch/arm/mach-omap2/board-rx51.c
+++ b/arch/arm/mach-omap2/board-rx51.c
@@ -15,7 +15,6 @@
#include <linux/err.h>
#include <linux/clk.h>
#include <linux/io.h>
-#include <linux/delay.h>
#include <linux/gpio.h>
#include <mach/hardware.h>
diff --git a/arch/arm/mach-omap2/clock24xx.c b/arch/arm/mach-omap2/clock24xx.c
index 1e839c5a28c..e4cef333e29 100644
--- a/arch/arm/mach-omap2/clock24xx.c
+++ b/arch/arm/mach-omap2/clock24xx.c
@@ -60,12 +60,13 @@ struct omap_clk {
}, \
}
-#define CK_243X (1 << 0)
-#define CK_242X (1 << 1)
+#define CK_243X RATE_IN_243X
+#define CK_242X RATE_IN_242X
static struct omap_clk omap24xx_clks[] = {
/* external root sources */
CLK(NULL, "func_32k_ck", &func_32k_ck, CK_243X | CK_242X),
+ CLK(NULL, "secure_32k_ck", &secure_32k_ck, CK_243X | CK_242X),
CLK(NULL, "osc_ck", &osc_ck, CK_243X | CK_242X),
CLK(NULL, "sys_ck", &sys_ck, CK_243X | CK_242X),
CLK(NULL, "alt_ck", &alt_ck, CK_243X | CK_242X),
@@ -102,10 +103,10 @@ static struct omap_clk omap24xx_clks[] = {
CLK(NULL, "mdm_ick", &mdm_ick, CK_243X),
CLK(NULL, "mdm_osc_ck", &mdm_osc_ck, CK_243X),
/* DSS domain clocks */
- CLK(NULL, "dss_ick", &dss_ick, CK_243X | CK_242X),
- CLK(NULL, "dss1_fck", &dss1_fck, CK_243X | CK_242X),
- CLK(NULL, "dss2_fck", &dss2_fck, CK_243X | CK_242X),
- CLK(NULL, "dss_54m_fck", &dss_54m_fck, CK_243X | CK_242X),
+ CLK("omapfb", "ick", &dss_ick, CK_243X | CK_242X),
+ CLK("omapfb", "dss1_fck", &dss1_fck, CK_243X | CK_242X),
+ CLK("omapfb", "dss2_fck", &dss2_fck, CK_243X | CK_242X),
+ CLK("omapfb", "tv_fck", &dss_54m_fck, CK_243X | CK_242X),
/* L3 domain clocks */
CLK(NULL, "core_l3_ck", &core_l3_ck, CK_243X | CK_242X),
CLK(NULL, "ssi_fck", &ssi_ssr_sst_fck, CK_243X | CK_242X),
@@ -205,7 +206,7 @@ static struct omap_clk omap24xx_clks[] = {
CLK(NULL, "aes_ick", &aes_ick, CK_243X | CK_242X),
CLK(NULL, "pka_ick", &pka_ick, CK_243X | CK_242X),
CLK(NULL, "usb_fck", &usb_fck, CK_243X | CK_242X),
- CLK(NULL, "usbhs_ick", &usbhs_ick, CK_243X),
+ CLK("musb_hdrc", "ick", &usbhs_ick, CK_243X),
CLK("mmci-omap-hs.0", "ick", &mmchs1_ick, CK_243X),
CLK("mmci-omap-hs.0", "fck", &mmchs1_fck, CK_243X),
CLK("mmci-omap-hs.1", "ick", &mmchs2_ick, CK_243X),
@@ -711,7 +712,7 @@ int __init omap2_clk_init(void)
{
struct prcm_config *prcm;
struct omap_clk *c;
- u32 clkrate, cpu_mask;
+ u32 clkrate;
if (cpu_is_omap242x())
cpu_mask = RATE_IN_242X;
@@ -720,21 +721,15 @@ int __init omap2_clk_init(void)
clk_init(&omap2_clk_functions);
+ for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
+ clk_init_one(c->lk.clk);
+
osc_ck.rate = omap2_osc_clk_recalc(&osc_ck);
propagate_rate(&osc_ck);
sys_ck.rate = omap2_sys_clk_recalc(&sys_ck);
propagate_rate(&sys_ck);
for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
- clk_init_one(c->lk.clk);
-
- cpu_mask = 0;
- if (cpu_is_omap2420())
- cpu_mask |= CK_242X;
- if (cpu_is_omap2430())
- cpu_mask |= CK_243X;
-
- for (c = omap24xx_clks; c < omap24xx_clks + ARRAY_SIZE(omap24xx_clks); c++)
if (c->cpu & cpu_mask) {
clkdev_add(&c->lk);
clk_register(c->lk.clk);
diff --git a/arch/arm/mach-omap2/clock24xx.h b/arch/arm/mach-omap2/clock24xx.h
index 33c3e5b1432..88c5acb40fc 100644
--- a/arch/arm/mach-omap2/clock24xx.h
+++ b/arch/arm/mach-omap2/clock24xx.h
@@ -625,6 +625,14 @@ static struct clk func_32k_ck = {
.clkdm_name = "wkup_clkdm",
};
+static struct clk secure_32k_ck = {
+ .name = "secure_32k_ck",
+ .ops = &clkops_null,
+ .rate = 32768,
+ .flags = RATE_FIXED,
+ .clkdm_name = "wkup_clkdm",
+};
+
/* Typical 12/13MHz in standalone mode, will be 26Mhz in chassis mode */
static struct clk osc_ck = { /* (*12, *13, 19.2, *26, 38.4)MHz */
.name = "osc_ck",
@@ -1790,7 +1798,7 @@ static struct clk gpt12_ick = {
static struct clk gpt12_fck = {
.name = "gpt12_fck",
.ops = &clkops_omap2_dflt_wait,
- .parent = &func_32k_ck,
+ .parent = &secure_32k_ck,
.clkdm_name = "core_l4_clkdm",
.enable_reg = OMAP_CM_REGADDR(CORE_MOD, CM_FCLKEN1),
.enable_bit = OMAP24XX_EN_GPT12_SHIFT,
diff --git a/arch/arm/mach-omap2/clock34xx.c b/arch/arm/mach-omap2/clock34xx.c
index 0a14dca31e3..ba05aa42bd8 100644
--- a/arch/arm/mach-omap2/clock34xx.c
+++ b/arch/arm/mach-omap2/clock34xx.c
@@ -157,7 +157,7 @@ static struct omap_clk omap34xx_clks[] = {
CLK(NULL, "ssi_ssr_fck", &ssi_ssr_fck, CK_343X),
CLK(NULL, "ssi_sst_fck", &ssi_sst_fck, CK_343X),
CLK(NULL, "core_l3_ick", &core_l3_ick, CK_343X),
- CLK(NULL, "hsotgusb_ick", &hsotgusb_ick, CK_343X),
+ CLK("musb_hdrc", "ick", &hsotgusb_ick, CK_343X),
CLK(NULL, "sdrc_ick", &sdrc_ick, CK_343X),
CLK(NULL, "gpmc_fck", &gpmc_fck, CK_343X),
CLK(NULL, "security_l3_ick", &security_l3_ick, CK_343X),
@@ -197,11 +197,11 @@ static struct omap_clk omap34xx_clks[] = {
CLK("omap_rng", "ick", &rng_ick, CK_343X),
CLK(NULL, "sha11_ick", &sha11_ick, CK_343X),
CLK(NULL, "des1_ick", &des1_ick, CK_343X),
- CLK(NULL, "dss1_alwon_fck", &dss1_alwon_fck, CK_343X),
- CLK(NULL, "dss_tv_fck", &dss_tv_fck, CK_343X),
- CLK(NULL, "dss_96m_fck", &dss_96m_fck, CK_343X),
- CLK(NULL, "dss2_alwon_fck", &dss2_alwon_fck, CK_343X),
- CLK(NULL, "dss_ick", &dss_ick, CK_343X),
+ CLK("omapfb", "dss1_fck", &dss1_alwon_fck, CK_343X),
+ CLK("omapfb", "tv_fck", &dss_tv_fck, CK_343X),
+ CLK("omapfb", "video_fck", &dss_96m_fck, CK_343X),
+ CLK("omapfb", "dss2_fck", &dss2_alwon_fck, CK_343X),
+ CLK("omapfb", "ick", &dss_ick, CK_343X),
CLK(NULL, "cam_mclk", &cam_mclk, CK_343X),
CLK(NULL, "cam_ick", &cam_ick, CK_343X),
CLK(NULL, "csi2_96m_fck", &csi2_96m_fck, CK_343X),
diff --git a/arch/arm/mach-omap2/clock34xx.h b/arch/arm/mach-omap2/clock34xx.h
index 70ec10deb65..017a30e9aa1 100644
--- a/arch/arm/mach-omap2/clock34xx.h
+++ b/arch/arm/mach-omap2/clock34xx.h
@@ -2052,7 +2052,7 @@ static struct clk dss_ick = {
static struct clk cam_mclk = {
.name = "cam_mclk",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &dpll4_m5x2_ck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_CAM_SHIFT,
@@ -2063,7 +2063,7 @@ static struct clk cam_mclk = {
static struct clk cam_ick = {
/* Handles both L3 and L4 clocks */
.name = "cam_ick",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &l4_ick,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_ICLKEN),
@@ -2074,7 +2074,7 @@ static struct clk cam_ick = {
static struct clk csi2_96m_fck = {
.name = "csi2_96m_fck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &core_96m_fck,
.init = &omap2_init_clk_clkdm,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_CAM_MOD, CM_FCLKEN),
@@ -2182,7 +2182,7 @@ static struct clk wkup_32k_fck = {
static struct clk gpio1_dbck = {
.name = "gpio1_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &wkup_32k_fck,
.enable_reg = OMAP_CM_REGADDR(WKUP_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO1_SHIFT,
@@ -2427,7 +2427,7 @@ static struct clk per_32k_alwon_fck = {
static struct clk gpio6_dbck = {
.name = "gpio6_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO6_SHIFT,
@@ -2437,7 +2437,7 @@ static struct clk gpio6_dbck = {
static struct clk gpio5_dbck = {
.name = "gpio5_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO5_SHIFT,
@@ -2447,7 +2447,7 @@ static struct clk gpio5_dbck = {
static struct clk gpio4_dbck = {
.name = "gpio4_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO4_SHIFT,
@@ -2457,7 +2457,7 @@ static struct clk gpio4_dbck = {
static struct clk gpio3_dbck = {
.name = "gpio3_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO3_SHIFT,
@@ -2467,7 +2467,7 @@ static struct clk gpio3_dbck = {
static struct clk gpio2_dbck = {
.name = "gpio2_dbck",
- .ops = &clkops_omap2_dflt_wait,
+ .ops = &clkops_omap2_dflt,
.parent = &per_32k_alwon_fck,
.enable_reg = OMAP_CM_REGADDR(OMAP3430_PER_MOD, CM_FCLKEN),
.enable_bit = OMAP3430_EN_GPIO2_SHIFT,
@@ -2901,7 +2901,6 @@ static struct clk sr_l4_ick = {
/* SECURE_32K_FCK clocks */
-/* XXX This clock no longer exists in 3430 TRM rev F */
static struct clk gpt12_fck = {
.name = "gpt12_fck",
.ops = &clkops_null,
diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c
index d6b4b2f8722..894cc355818 100644
--- a/arch/arm/mach-omap2/devices.c
+++ b/arch/arm/mach-omap2/devices.c
@@ -25,7 +25,6 @@
#include <mach/board.h>
#include <mach/mux.h>
#include <mach/gpio.h>
-#include <mach/eac.h>
#include <mach/mmc.h>
#if defined(CONFIG_VIDEO_OMAP2) || defined(CONFIG_VIDEO_OMAP2_MODULE)
@@ -355,10 +354,12 @@ static void omap_init_mcspi(void)
platform_device_register(&omap2_mcspi1);
platform_device_register(&omap2_mcspi2);
#if defined(CONFIG_ARCH_OMAP2430) || defined(CONFIG_ARCH_OMAP3)
- platform_device_register(&omap2_mcspi3);
+ if (cpu_is_omap2430() || cpu_is_omap343x())
+ platform_device_register(&omap2_mcspi3);
#endif
#ifdef CONFIG_ARCH_OMAP3
- platform_device_register(&omap2_mcspi4);
+ if (cpu_is_omap343x())
+ platform_device_register(&omap2_mcspi4);
#endif
}
@@ -366,38 +367,6 @@ static void omap_init_mcspi(void)
static inline void omap_init_mcspi(void) {}
#endif
-#ifdef CONFIG_SND_OMAP24XX_EAC
-
-#define OMAP2_EAC_BASE 0x48090000
-
-static struct resource omap2_eac_resources[] = {
- {
- .start = OMAP2_EAC_BASE,
- .end = OMAP2_EAC_BASE + 0x109,
- .flags = IORESOURCE_MEM,
- },
-};
-
-static struct platform_device omap2_eac_device = {
- .name = "omap24xx-eac",
- .id = -1,
- .num_resources = ARRAY_SIZE(omap2_eac_resources),
- .resource = omap2_eac_resources,
- .dev = {
- .platform_data = NULL,
- },
-};
-
-void omap_init_eac(struct eac_platform_data *pdata)
-{
- omap2_eac_device.dev.platform_data = pdata;
- platform_device_register(&omap2_eac_device);
-}
-
-#else
-void omap_init_eac(struct eac_platform_data *pdata) {}
-#endif
-
#ifdef CONFIG_OMAP_SHA1_MD5
static struct resource sha1_md5_resources[] = {
{
diff --git a/arch/arm/mach-omap2/irq.c b/arch/arm/mach-omap2/irq.c
index 9ba20d985dd..998c5c45587 100644
--- a/arch/arm/mach-omap2/irq.c
+++ b/arch/arm/mach-omap2/irq.c
@@ -73,9 +73,9 @@ static int omap_check_spurious(unsigned int irq)
u32 sir, spurious;
sir = intc_bank_read_reg(&irq_banks[0], INTC_SIR);
- spurious = sir >> 6;
+ spurious = sir >> 7;
- if (spurious > 1) {
+ if (spurious) {
printk(KERN_WARNING "Spurious irq %i: 0x%08x, please flush "
"posted write for irq %i\n",
irq, sir, previous_irq);
diff --git a/arch/arm/mach-omap2/prm-regbits-34xx.h b/arch/arm/mach-omap2/prm-regbits-34xx.h
index c6a7940f428..9fd03a2ec95 100644
--- a/arch/arm/mach-omap2/prm-regbits-34xx.h
+++ b/arch/arm/mach-omap2/prm-regbits-34xx.h
@@ -409,7 +409,7 @@
/* PM_PREPWSTST_CAM specific bits */
/* PM_PWSTCTRL_USBHOST specific bits */
-#define OMAP3430ES2_SAVEANDRESTORE_SHIFT (1 << 4)
+#define OMAP3430ES2_SAVEANDRESTORE_SHIFT 4
/* RM_RSTST_PER specific bits */
diff --git a/arch/arm/mach-omap2/timer-gp.c b/arch/arm/mach-omap2/timer-gp.c
index 1cb2c0909c2..f36aba12090 100644
--- a/arch/arm/mach-omap2/timer-gp.c
+++ b/arch/arm/mach-omap2/timer-gp.c
@@ -3,6 +3,8 @@
*
* OMAP2 GP timer support.
*
+ * Copyright (C) 2009 Nokia Corporation
+ *
* Update to use new clocksource/clockevent layers
* Author: Kevin Hilman, MontaVista Software, Inc. <source@mvista.com>
* Copyright (C) 2007 MontaVista Software, Inc.
@@ -36,8 +38,13 @@
#include <asm/mach/time.h>
#include <mach/dmtimer.h>
+/* MAX_GPTIMER_ID: number of GPTIMERs on the chip */
+#define MAX_GPTIMER_ID 12
+
static struct omap_dm_timer *gptimer;
static struct clock_event_device clockevent_gpt;
+static u8 __initdata gptimer_id = 1;
+static u8 __initdata inited;
static irqreturn_t omap2_gp_timer_interrupt(int irq, void *dev_id)
{
@@ -95,20 +102,53 @@ static struct clock_event_device clockevent_gpt = {
.set_mode = omap2_gp_timer_set_mode,
};
+/**
+ * omap2_gp_clockevent_set_gptimer - set which GPTIMER is used for clockevents
+ * @id: GPTIMER to use (1..MAX_GPTIMER_ID)
+ *
+ * Define the GPTIMER that the system should use for the tick timer.
+ * Meant to be called from board-*.c files in the event that GPTIMER1, the
+ * default, is unsuitable. Returns -EINVAL on error or 0 on success.
+ */
+int __init omap2_gp_clockevent_set_gptimer(u8 id)
+{
+ if (id < 1 || id > MAX_GPTIMER_ID)
+ return -EINVAL;
+
+ BUG_ON(inited);
+
+ gptimer_id = id;
+
+ return 0;
+}
+
static void __init omap2_gp_clockevent_init(void)
{
u32 tick_rate;
+ int src;
+
+ inited = 1;
- gptimer = omap_dm_timer_request_specific(1);
+ gptimer = omap_dm_timer_request_specific(gptimer_id);
BUG_ON(gptimer == NULL);
#if defined(CONFIG_OMAP_32K_TIMER)
- omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_32_KHZ);
+ src = OMAP_TIMER_SRC_32_KHZ;
#else
- omap_dm_timer_set_source(gptimer, OMAP_TIMER_SRC_SYS_CLK);
+ src = OMAP_TIMER_SRC_SYS_CLK;
+ WARN(gptimer_id == 12, "WARNING: GPTIMER12 can only use the "
+ "secure 32KiHz clock source\n");
#endif
+
+ if (gptimer_id != 12)
+ WARN(IS_ERR_VALUE(omap_dm_timer_set_source(gptimer, src)),
+ "timer-gp: omap_dm_timer_set_source() failed\n");
+
tick_rate = clk_get_rate(omap_dm_timer_get_fclk(gptimer));
+ pr_info("OMAP clockevent source: GPTIMER%d at %u Hz\n",
+ gptimer_id, tick_rate);
+
omap2_gp_timer_irq.dev_id = (void *)gptimer;
setup_irq(omap_dm_timer_get_irq(gptimer), &omap2_gp_timer_irq);
omap_dm_timer_set_int_enable(gptimer, OMAP_TIMER_INT_OVERFLOW);
@@ -125,6 +165,8 @@ static void __init omap2_gp_clockevent_init(void)
clockevents_register_device(&clockevent_gpt);
}
+/* Clocksource code */
+
#ifdef CONFIG_OMAP_32K_TIMER
/*
* When 32k-timer is enabled, don't use GPTimer for clocksource
diff --git a/arch/arm/mach-omap2/usb-tusb6010.c b/arch/arm/mach-omap2/usb-tusb6010.c
index 15e509013de..8622c24cd27 100644
--- a/arch/arm/mach-omap2/usb-tusb6010.c
+++ b/arch/arm/mach-omap2/usb-tusb6010.c
@@ -187,7 +187,7 @@ int tusb6010_platform_retime(unsigned is_refclk)
unsigned sysclk_ps;
int status;
- if (!refclk_psec)
+ if (!refclk_psec || fclk_ps == 0)
return -ENODEV;
sysclk_ps = is_refclk ? refclk_psec : TUSB6010_OSCCLK_60;
diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig
index 3e66d9099ea..17d3fbd368a 100644
--- a/arch/arm/mach-pxa/Kconfig
+++ b/arch/arm/mach-pxa/Kconfig
@@ -289,12 +289,12 @@ config MACH_LITTLETON
config MACH_TAVOREVB
bool "PXA930 Evaluation Board (aka TavorEVB)"
select PXA3xx
- select PXA930
+ select CPU_PXA930
config MACH_SAAR
bool "PXA930 Handheld Platform (aka SAAR)"
select PXA3xx
- select PXA930
+ select CPU_PXA930
config MACH_ARMCORE
bool "CompuLab CM-X255/CM-X270 modules"
diff --git a/arch/arm/mach-pxa/corgi.c b/arch/arm/mach-pxa/corgi.c
index cdf21dd135b..930e364ccde 100644
--- a/arch/arm/mach-pxa/corgi.c
+++ b/arch/arm/mach-pxa/corgi.c
@@ -427,12 +427,22 @@ static struct pxa2xx_spi_master corgi_spi_info = {
.num_chipselect = 3,
};
+static void corgi_wait_for_hsync(void)
+{
+ while (gpio_get_value(CORGI_GPIO_HSYNC))
+ cpu_relax();
+
+ while (!gpio_get_value(CORGI_GPIO_HSYNC))
+ cpu_relax();
+}
+
static struct ads7846_platform_data corgi_ads7846_info = {
.model = 7846,
.vref_delay_usecs = 100,
.x_plate_ohms = 419,
.y_plate_ohms = 486,
.gpio_pendown = CORGI_GPIO_TP_INT,
+ .wait_for_sync = corgi_wait_for_hsync,
};
static void corgi_ads7846_cs(u32 command)
diff --git a/arch/arm/mach-pxa/littleton.c b/arch/arm/mach-pxa/littleton.c
index e13f6a81c22..c872b9feb4d 100644
--- a/arch/arm/mach-pxa/littleton.c
+++ b/arch/arm/mach-pxa/littleton.c
@@ -334,6 +334,11 @@ static struct led_info littleton_da9034_leds[] = {
},
};
+static struct da9034_touch_pdata littleton_da9034_touch = {
+ .x_inverted = 1,
+ .interval_ms = 20,
+};
+
static struct da903x_subdev_info littleton_da9034_subdevs[] = {
{
.name = "da903x-led",
@@ -350,6 +355,10 @@ static struct da903x_subdev_info littleton_da9034_subdevs[] = {
}, {
.name = "da903x-backlight",
.id = DA9034_ID_WLED,
+ }, {
+ .name = "da9034-touch",
+ .id = DA9034_ID_TOUCH,
+ .platform_data = &littleton_da9034_touch,
},
};
diff --git a/arch/arm/mach-pxa/spitz.c b/arch/arm/mach-pxa/spitz.c
index 8c61ddac119..c18e34acafc 100644
--- a/arch/arm/mach-pxa/spitz.c
+++ b/arch/arm/mach-pxa/spitz.c
@@ -299,12 +299,22 @@ static struct pxa2xx_spi_master spitz_spi_info = {
.num_chipselect = 3,
};
+static void spitz_wait_for_hsync(void)
+{
+ while (gpio_get_value(SPITZ_GPIO_HSYNC))
+ cpu_relax();
+
+ while (!gpio_get_value(SPITZ_GPIO_HSYNC))
+ cpu_relax();
+}
+
static struct ads7846_platform_data spitz_ads7846_info = {
.model = 7846,
.vref_delay_usecs = 100,
.x_plate_ohms = 419,
.y_plate_ohms = 486,
.gpio_pendown = SPITZ_GPIO_TP_INT,
+ .wait_for_sync = spitz_wait_for_hsync,
};
static void spitz_ads7846_cs(u32 command)
diff --git a/arch/arm/mach-pxa/viper.c b/arch/arm/mach-pxa/viper.c
index 0e65344e9f5..dd031cc4184 100644
--- a/arch/arm/mach-pxa/viper.c
+++ b/arch/arm/mach-pxa/viper.c
@@ -46,6 +46,7 @@
#include <mach/audio.h>
#include <mach/pxafb.h>
#include <mach/i2c.h>
+#include <mach/regs-uart.h>
#include <mach/viper.h>
#include <asm/setup.h>
diff --git a/arch/arm/mach-pxa/zylonite_pxa300.c b/arch/arm/mach-pxa/zylonite_pxa300.c
index c1f73205d07..c256c57642c 100644
--- a/arch/arm/mach-pxa/zylonite_pxa300.c
+++ b/arch/arm/mach-pxa/zylonite_pxa300.c
@@ -72,6 +72,7 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
GPIO25_AC97_SDATA_IN_0,
GPIO27_AC97_SDATA_OUT,
GPIO28_AC97_SYNC,
+ GPIO17_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */
/* SSP3 */
GPIO91_SSP3_SCLK,
@@ -126,6 +127,10 @@ static mfp_cfg_t common_mfp_cfg[] __initdata = {
/* Standard I2C */
GPIO21_I2C_SCL,
GPIO22_I2C_SDA,
+
+ /* GPIO */
+ GPIO18_GPIO, /* GPIO Expander #0 INT_N */
+ GPIO19_GPIO, /* GPIO Expander #1 INT_N */
};
static mfp_cfg_t pxa300_mfp_cfg[] __initdata = {
diff --git a/arch/arm/mach-pxa/zylonite_pxa320.c b/arch/arm/mach-pxa/zylonite_pxa320.c
index 4e1c488c690..cc5a2283360 100644
--- a/arch/arm/mach-pxa/zylonite_pxa320.c
+++ b/arch/arm/mach-pxa/zylonite_pxa320.c
@@ -68,6 +68,7 @@ static mfp_cfg_t mfp_cfg[] __initdata = {
GPIO38_AC97_SYNC,
GPIO39_AC97_BITCLK,
GPIO40_AC97_nACRESET,
+ GPIO36_GPIO, /* SDATA_IN_1 but unused - configure to GPIO */
/* SSP3 */
GPIO89_SSP3_SCLK,
diff --git a/arch/arm/mach-realview/core.c b/arch/arm/mach-realview/core.c
index 942e1a7eb9b..076acbc5070 100644
--- a/arch/arm/mach-realview/core.c
+++ b/arch/arm/mach-realview/core.c
@@ -750,14 +750,6 @@ void __init realview_timer_init(unsigned int timer_irq)
{
u32 val;
-#ifdef CONFIG_GENERIC_CLOCKEVENTS_BROADCAST
- /*
- * The dummy clock device has to be registered before the main device
- * so that the latter will broadcast the clock events
- */
- local_timer_setup();
-#endif
-
/*
* set clock frequency:
* REALVIEW_REFCLK is 32KHz
diff --git a/arch/arm/mach-realview/include/mach/smp.h b/arch/arm/mach-realview/include/mach/smp.h
index 515819efd04..dd53892d44a 100644
--- a/arch/arm/mach-realview/include/mach/smp.h
+++ b/arch/arm/mach-realview/include/mach/smp.h
@@ -15,16 +15,9 @@
/*
* We use IRQ1 as the IPI
*/
-static inline void smp_cross_call(cpumask_t callmap)
-{
- gic_raise_softirq(callmap, 1);
-}
-
-/*
- * Do nothing on MPcore.
- */
-static inline void smp_cross_call_done(cpumask_t callmap)
+static inline void smp_cross_call(const struct cpumask *mask)
{
+ gic_raise_softirq(mask, 1);
}
#endif
diff --git a/arch/arm/mach-realview/localtimer.c b/arch/arm/mach-realview/localtimer.c
index d0d39adf640..1c01d13460f 100644
--- a/arch/arm/mach-realview/localtimer.c
+++ b/arch/arm/mach-realview/localtimer.c
@@ -189,8 +189,10 @@ void __cpuinit local_timer_setup(void)
struct clock_event_device *clk = &per_cpu(local_clockevent, cpu);
clk->name = "dummy_timer";
- clk->features = CLOCK_EVT_FEAT_DUMMY;
- clk->rating = 200;
+ clk->features = CLOCK_EVT_FEAT_ONESHOT |
+ CLOCK_EVT_FEAT_PERIODIC |
+ CLOCK_EVT_FEAT_DUMMY;
+ clk->rating = 400;
clk->mult = 1;
clk->set_mode = dummy_timer_set_mode;
clk->broadcast = smp_timer_broadcast;
diff --git a/arch/arm/mach-realview/platsmp.c b/arch/arm/mach-realview/platsmp.c
index ea3c75595fa..30a9c68591f 100644
--- a/arch/arm/mach-realview/platsmp.c
+++ b/arch/arm/mach-realview/platsmp.c
@@ -78,13 +78,6 @@ void __cpuinit platform_secondary_init(unsigned int cpu)
trace_hardirqs_off();
/*
- * the primary core may have used a "cross call" soft interrupt
- * to get this processor out of WFI in the BootMonitor - make
- * sure that we are no longer being sent this soft interrupt
- */
- smp_cross_call_done(cpumask_of_cpu(cpu));
-
- /*
* if any interrupts are already enabled for the primary
* core (e.g. timer irq), then they will not have been enabled
* for us: do so
@@ -136,7 +129,7 @@ int __cpuinit boot_secondary(unsigned int cpu, struct task_struct *idle)
* Use smp_cross_call() for this, since there's little
* point duplicating the code here
*/
- smp_cross_call(cpumask_of_cpu(cpu));
+ smp_cross_call(cpumask_of(cpu));
timeout = jiffies + (1 * HZ);
while (time_before(jiffies, timeout)) {
@@ -224,11 +217,9 @@ void __init smp_prepare_cpus(unsigned int max_cpus)
if (max_cpus > ncores)
max_cpus = ncores;
-#ifdef CONFIG_LOCAL_TIMERS
+#if defined(CONFIG_LOCAL_TIMERS) || defined(CONFIG_GENERIC_CLOCKEVENTS_BROADCAST)
/*
- * Enable the local timer for primary CPU. If the device is
- * dummy (!CONFIG_LOCAL_TIMERS), it was already registers in
- * realview_timer_init
+ * Enable the local timer or broadcast device for the boot CPU.
*/
local_timer_setup();
#endif
diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c
index 4389c160f7d..8637dea5e15 100644
--- a/arch/arm/mach-s3c2410/mach-bast.c
+++ b/arch/arm/mach-s3c2410/mach-bast.c
@@ -588,8 +588,6 @@ static void __init bast_map_io(void)
s3c_device_nand.dev.platform_data = &bast_nand_info;
- s3c_i2c0_set_platdata(&bast_i2c_info);
-
s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc));
s3c24xx_init_clocks(0);
s3c24xx_init_uarts(bast_uartcfgs, ARRAY_SIZE(bast_uartcfgs));
@@ -602,6 +600,7 @@ static void __init bast_init(void)
sysdev_class_register(&bast_pm_sysclass);
sysdev_register(&bast_pm_sysdev);
+ s3c_i2c0_set_platdata(&bast_i2c_info);
s3c24xx_fb_set_platdata(&bast_fb_info);
platform_add_devices(bast_devices, ARRAY_SIZE(bast_devices));
diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c
index c9cfe40e21f..a7417c479ff 100644
--- a/arch/arm/mach-s3c2412/pm.c
+++ b/arch/arm/mach-s3c2412/pm.c
@@ -21,6 +21,7 @@
#include <linux/io.h>
#include <mach/hardware.h>
+#include <asm/cacheflush.h>
#include <asm/irq.h>
#include <mach/regs-power.h>
@@ -39,6 +40,8 @@ static void s3c2412_cpu_suspend(void)
{
unsigned long tmp;
+ flush_cache_all();
+
/* set our standby method to sleep */
tmp = __raw_readl(S3C2412_PWRCFG);
diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h
index baf1c0f1ea5..8199972ed5b 100644
--- a/arch/arm/mach-s3c6400/include/mach/map.h
+++ b/arch/arm/mach-s3c6400/include/mach/map.h
@@ -40,6 +40,8 @@
#define S3C64XX_PA_FB (0x77100000)
#define S3C64XX_PA_SYSCON (0x7E00F000)
+#define S3C64XX_PA_IIS0 (0x7F002000)
+#define S3C64XX_PA_IIS1 (0x7F003000)
#define S3C64XX_PA_TIMER (0x7F006000)
#define S3C64XX_PA_IIC0 (0x7F004000)
#define S3C64XX_PA_IIC1 (0x7F00F000)
diff --git a/arch/arm/mach-sa1100/lart.c b/arch/arm/mach-sa1100/lart.c
index 0cd52692d2f..1f940df0e5a 100644
--- a/arch/arm/mach-sa1100/lart.c
+++ b/arch/arm/mach-sa1100/lart.c
@@ -9,6 +9,7 @@
#include <mach/hardware.h>
#include <asm/setup.h>
#include <asm/mach-types.h>
+#include <asm/page.h>
#include <asm/mach/arch.h>
#include <asm/mach/map.h>
diff --git a/arch/arm/mach-versatile/core.c b/arch/arm/mach-versatile/core.c
index 1f929c391af..b3bebcc5623 100644
--- a/arch/arm/mach-versatile/core.c
+++ b/arch/arm/mach-versatile/core.c
@@ -413,7 +413,7 @@ static struct clk ref24_clk = {
.rate = 24000000,
};
-static struct clk_lookup lookups[] __initdata = {
+static struct clk_lookup lookups[] = {
{ /* UART0 */
.dev_id = "dev:f1",
.clk = &ref24_clk,
diff --git a/arch/arm/mm/cache-v6.S b/arch/arm/mm/cache-v6.S
index 2c6c2a7c05a..8f5c13f4c93 100644
--- a/arch/arm/mm/cache-v6.S
+++ b/arch/arm/mm/cache-v6.S
@@ -20,6 +20,31 @@
#define D_CACHE_LINE_SIZE 32
#define BTB_FLUSH_SIZE 8
+#ifdef CONFIG_ARM_ERRATA_411920
+/*
+ * Invalidate the entire I cache (this code is a workaround for the ARM1136
+ * erratum 411920 - Invalidate Instruction Cache operation can fail. This
+ * erratum is present in 1136, 1156 and 1176. It does not affect the MPCore.
+ *
+ * Registers:
+ * r0 - set to 0
+ * r1 - corrupted
+ */
+ENTRY(v6_icache_inval_all)
+ mov r0, #0
+ mrs r1, cpsr
+ cpsid ifa @ disable interrupts
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ mcr p15, 0, r0, c7, c5, 0 @ invalidate entire I-cache
+ msr cpsr_cx, r1 @ restore interrupts
+ .rept 11 @ ARM Ltd recommends at least
+ nop @ 11 NOPs
+ .endr
+ mov pc, lr
+#endif
+
/*
* v6_flush_cache_all()
*
@@ -31,8 +56,12 @@ ENTRY(v6_flush_kern_cache_all)
mov r0, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c14, 0 @ D cache clean+invalidate
+#ifndef CONFIG_ARM_ERRATA_411920
mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
#else
+ b v6_icache_inval_all
+#endif
+#else
mcr p15, 0, r0, c7, c15, 0 @ Cache clean+invalidate
#endif
mov pc, lr
@@ -103,8 +132,12 @@ ENTRY(v6_coherent_user_range)
mov r0, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r0, c7, c10, 4 @ drain write buffer
+#ifndef CONFIG_ARM_ERRATA_411920
mcr p15, 0, r0, c7, c5, 0 @ I+BTB cache invalidate
#else
+ b v6_icache_inval_all
+#endif
+#else
mcr p15, 0, r0, c7, c5, 6 @ invalidate BTB
#endif
mov pc, lr
diff --git a/arch/arm/mm/flush.c b/arch/arm/mm/flush.c
index 4e283481cee..c07222eb5ce 100644
--- a/arch/arm/mm/flush.c
+++ b/arch/arm/mm/flush.c
@@ -18,6 +18,10 @@
#include "mm.h"
+#ifdef CONFIG_ARM_ERRATA_411920
+extern void v6_icache_inval_all(void);
+#endif
+
#ifdef CONFIG_CPU_CACHE_VIPT
#define ALIAS_FLUSH_START 0xffff4000
@@ -32,10 +36,15 @@ static void flush_pfn_alias(unsigned long pfn, unsigned long vaddr)
asm( "mcrr p15, 0, %1, %0, c14\n"
" mcr p15, 0, %2, c7, c10, 4\n"
+#ifndef CONFIG_ARM_ERRATA_411920
" mcr p15, 0, %2, c7, c5, 0\n"
+#endif
:
: "r" (to), "r" (to + PAGE_SIZE - L1_CACHE_BYTES), "r" (zero)
: "cc");
+#ifdef CONFIG_ARM_ERRATA_411920
+ v6_icache_inval_all();
+#endif
}
void flush_cache_mm(struct mm_struct *mm)
@@ -48,11 +57,16 @@ void flush_cache_mm(struct mm_struct *mm)
if (cache_is_vipt_aliasing()) {
asm( "mcr p15, 0, %0, c7, c14, 0\n"
+ " mcr p15, 0, %0, c7, c10, 4\n"
+#ifndef CONFIG_ARM_ERRATA_411920
" mcr p15, 0, %0, c7, c5, 0\n"
- " mcr p15, 0, %0, c7, c10, 4"
+#endif
:
: "r" (0)
: "cc");
+#ifdef CONFIG_ARM_ERRATA_411920
+ v6_icache_inval_all();
+#endif
}
}
@@ -67,11 +81,16 @@ void flush_cache_range(struct vm_area_struct *vma, unsigned long start, unsigned
if (cache_is_vipt_aliasing()) {
asm( "mcr p15, 0, %0, c7, c14, 0\n"
+ " mcr p15, 0, %0, c7, c10, 4\n"
+#ifndef CONFIG_ARM_ERRATA_411920
" mcr p15, 0, %0, c7, c5, 0\n"
- " mcr p15, 0, %0, c7, c10, 4"
+#endif
:
: "r" (0)
: "cc");
+#ifdef CONFIG_ARM_ERRATA_411920
+ v6_icache_inval_all();
+#endif
}
}
diff --git a/arch/arm/mm/proc-v7.S b/arch/arm/mm/proc-v7.S
index c221e26ac1d..3397f1e64d7 100644
--- a/arch/arm/mm/proc-v7.S
+++ b/arch/arm/mm/proc-v7.S
@@ -96,6 +96,9 @@ ENTRY(cpu_v7_switch_mm)
mov r2, #0
ldr r1, [r1, #MM_CONTEXT_ID] @ get mm->context.id
orr r0, r0, #TTB_FLAGS
+#ifdef CONFIG_ARM_ERRATA_430973
+ mcr p15, 0, r2, c7, c5, 6 @ flush BTAC/BTB
+#endif
mcr p15, 0, r2, c13, c0, 1 @ set reserved context ID
isb
1: mcr p15, 0, r0, c2, c0, 0 @ set TTB 0
@@ -181,6 +184,22 @@ __v7_setup:
stmia r12, {r0-r5, r7, r9, r11, lr}
bl v7_flush_dcache_all
ldmia r12, {r0-r5, r7, r9, r11, lr}
+#ifdef CONFIG_ARM_ERRATA_430973
+ mrc p15, 0, r10, c1, c0, 1 @ read aux control register
+ orr r10, r10, #(1 << 6) @ set IBE to 1
+ mcr p15, 0, r10, c1, c0, 1 @ write aux control register
+#endif
+#ifdef CONFIG_ARM_ERRATA_458693
+ mrc p15, 0, r10, c1, c0, 1 @ read aux control register
+ orr r10, r10, #(1 << 5) @ set L1NEON to 1
+ orr r10, r10, #(1 << 9) @ set PLDNOP to 1
+ mcr p15, 0, r10, c1, c0, 1 @ write aux control register
+#endif
+#ifdef CONFIG_ARM_ERRATA_460075
+ mrc p15, 1, r10, c9, c0, 2 @ read L2 cache aux ctrl register
+ orr r10, r10, #(1 << 22) @ set the Write Allocate disable bit
+ mcr p15, 1, r10, c9, c0, 2 @ write the L2 cache aux ctrl register
+#endif
mov r10, #0
#ifdef HARVARD_CACHE
mcr p15, 0, r10, c7, c5, 0 @ I+BTB cache invalidate
diff --git a/arch/arm/nwfpe/fpa11.h b/arch/arm/nwfpe/fpa11.h
index 386cbd13eaf..d3a6f9298e9 100644
--- a/arch/arm/nwfpe/fpa11.h
+++ b/arch/arm/nwfpe/fpa11.h
@@ -114,4 +114,8 @@ extern unsigned int SingleCPDO(struct roundingData *roundData,
extern unsigned int DoubleCPDO(struct roundingData *roundData,
const unsigned int opcode, FPREG * rFd);
+/* extneded_cpdo.c */
+extern unsigned int ExtendedCPDO(struct roundingData *roundData,
+ const unsigned int opcode, FPREG * rFd);
+
#endif
diff --git a/arch/arm/nwfpe/fpa11_cprt.c b/arch/arm/nwfpe/fpa11_cprt.c
index 9843dc53304..31c4eeec18b 100644
--- a/arch/arm/nwfpe/fpa11_cprt.c
+++ b/arch/arm/nwfpe/fpa11_cprt.c
@@ -27,10 +27,6 @@
#include "fpmodule.inl"
#include "softfloat.h"
-#ifdef CONFIG_FPE_NWFPE_XP
-extern flag floatx80_is_nan(floatx80);
-#endif
-
unsigned int PerformFLT(const unsigned int opcode);
unsigned int PerformFIX(const unsigned int opcode);
diff --git a/arch/arm/nwfpe/softfloat.h b/arch/arm/nwfpe/softfloat.h
index 260fe29d73f..13e479c5da5 100644
--- a/arch/arm/nwfpe/softfloat.h
+++ b/arch/arm/nwfpe/softfloat.h
@@ -226,6 +226,8 @@ char floatx80_le_quiet( floatx80, floatx80 );
char floatx80_lt_quiet( floatx80, floatx80 );
char floatx80_is_signaling_nan( floatx80 );
+extern flag floatx80_is_nan(floatx80);
+
#endif
static inline flag extractFloat32Sign(float32 a)
diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c
index e364a5ed10f..77646436c00 100644
--- a/arch/arm/plat-mxc/dma-mx1-mx2.c
+++ b/arch/arm/plat-mxc/dma-mx1-mx2.c
@@ -693,12 +693,15 @@ int imx_dma_request(int channel, const char *name)
local_irq_restore(flags);
return -EBUSY;
}
+ memset(imxdma, 0, sizeof(imxdma));
+ imxdma->name = name;
+ local_irq_restore(flags); /* request_irq() can block */
#ifdef CONFIG_ARCH_MX2
ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA",
NULL);
if (ret) {
- local_irq_restore(flags);
+ imxdma->name = NULL;
printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n",
MXC_INT_DMACH0 + channel, channel);
return ret;
@@ -708,13 +711,6 @@ int imx_dma_request(int channel, const char *name)
imxdma->watchdog.data = channel;
#endif
- imxdma->name = name;
- imxdma->irq_handler = NULL;
- imxdma->err_handler = NULL;
- imxdma->data = NULL;
- imxdma->sg = NULL;
-
- local_irq_restore(flags);
return ret;
}
EXPORT_SYMBOL(imx_dma_request);
@@ -737,10 +733,7 @@ void imx_dma_free(int channel)
local_irq_save(flags);
/* Disable interrupts */
- __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel),
- DMA_BASE + DMA_DIMR);
- __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN,
- DMA_BASE + DMA_CCR(channel));
+ imx_dma_disable(channel);
imxdma->name = NULL;
#ifdef CONFIG_ARCH_MX2
diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c
index c6483bad8a2..89e95798cc3 100644
--- a/arch/arm/plat-mxc/gpio.c
+++ b/arch/arm/plat-mxc/gpio.c
@@ -124,7 +124,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc)
irq_stat = __raw_readl(port->base + GPIO_ISR) &
__raw_readl(port->base + GPIO_IMR);
- BUG_ON(!irq_stat);
+
mxc_gpio_irq_handler(port, irq_stat);
}
#endif
diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
index 1cac9d1135c..d42f4e6116f 100644
--- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h
+++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h
@@ -47,7 +47,7 @@
/*
* Base address of PBC controller, CS4
*/
-#define PBC_BASE_ADDRESS 0xEB000000
+#define PBC_BASE_ADDRESS 0xf4300000
#define PBC_REG_ADDR(offset) (void __force __iomem *) \
(PBC_BASE_ADDRESS + (offset))
diff --git a/arch/arm/plat-omap/clock.c b/arch/arm/plat-omap/clock.c
index 2e0614552ac..29efc279287 100644
--- a/arch/arm/plat-omap/clock.c
+++ b/arch/arm/plat-omap/clock.c
@@ -239,6 +239,13 @@ void recalculate_root_clocks(void)
}
}
+/**
+ * clk_init_one - initialize any fields in the struct clk before clk init
+ * @clk: struct clk * to initialize
+ *
+ * Initialize any struct clk fields needed before normal clk initialization
+ * can run. No return value.
+ */
void clk_init_one(struct clk *clk)
{
INIT_LIST_HEAD(&clk->children);
diff --git a/arch/arm/plat-omap/dma.c b/arch/arm/plat-omap/dma.c
index 21cc0142b97..7fc8c045ad5 100644
--- a/arch/arm/plat-omap/dma.c
+++ b/arch/arm/plat-omap/dma.c
@@ -760,19 +760,12 @@ void omap_free_dma(int lch)
{
unsigned long flags;
- spin_lock_irqsave(&dma_chan_lock, flags);
if (dma_chan[lch].dev_id == -1) {
pr_err("omap_dma: trying to free unallocated DMA channel %d\n",
lch);
- spin_unlock_irqrestore(&dma_chan_lock, flags);
return;
}
- dma_chan[lch].dev_id = -1;
- dma_chan[lch].next_lch = -1;
- dma_chan[lch].callback = NULL;
- spin_unlock_irqrestore(&dma_chan_lock, flags);
-
if (cpu_class_is_omap1()) {
/* Disable all DMA interrupts for the channel. */
dma_write(0, CICR(lch));
@@ -798,6 +791,12 @@ void omap_free_dma(int lch)
dma_write(0, CCR(lch));
omap_clear_dma(lch);
}
+
+ spin_lock_irqsave(&dma_chan_lock, flags);
+ dma_chan[lch].dev_id = -1;
+ dma_chan[lch].next_lch = -1;
+ dma_chan[lch].callback = NULL;
+ spin_unlock_irqrestore(&dma_chan_lock, flags);
}
EXPORT_SYMBOL(omap_free_dma);
diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c
index bfd47570cc9..55bb9963129 100644
--- a/arch/arm/plat-omap/dmtimer.c
+++ b/arch/arm/plat-omap/dmtimer.c
@@ -238,7 +238,7 @@ static struct omap_dm_timer omap3_dm_timers[] = {
{ .phys_base = 0x49040000, .irq = INT_24XX_GPTIMER9 },
{ .phys_base = 0x48086000, .irq = INT_24XX_GPTIMER10 },
{ .phys_base = 0x48088000, .irq = INT_24XX_GPTIMER11 },
- { .phys_base = 0x48304000, .irq = INT_24XX_GPTIMER12 },
+ { .phys_base = 0x48304000, .irq = INT_34XX_GPT12_IRQ },
};
static const char *omap3_dm_source_names[] __initdata = {
@@ -321,11 +321,9 @@ static void omap_dm_timer_reset(struct omap_dm_timer *timer)
l |= 0x2 << 8; /* Set clock activity to perserve f-clock on idle */
/*
- * Enable wake-up only for GPT1 on OMAP2 CPUs.
- * FIXME: All timers should have wake-up enabled and clear
- * PRCM status.
+ * Enable wake-up on OMAP2 CPUs.
*/
- if (cpu_class_is_omap2() && (timer == &dm_timers[0]))
+ if (cpu_class_is_omap2())
l |= 1 << 2;
omap_dm_timer_write_reg(timer, OMAP_TIMER_OCP_CFG_REG, l);
@@ -511,7 +509,7 @@ EXPORT_SYMBOL_GPL(omap_dm_timer_stop);
#ifdef CONFIG_ARCH_OMAP1
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
int n = (timer - dm_timers) << 1;
u32 l;
@@ -519,23 +517,31 @@ void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
l = omap_readl(MOD_CONF_CTRL_1) & ~(0x03 << n);
l |= source << n;
omap_writel(l, MOD_CONF_CTRL_1);
+
+ return 0;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
#else
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source)
{
+ int ret = -EINVAL;
+
if (source < 0 || source >= 3)
- return;
+ return -EINVAL;
clk_disable(timer->fclk);
- clk_set_parent(timer->fclk, dm_source_clocks[source]);
+ ret = clk_set_parent(timer->fclk, dm_source_clocks[source]);
clk_enable(timer->fclk);
- /* When the functional clock disappears, too quick writes seem to
- * cause an abort. */
+ /*
+ * When the functional clock disappears, too quick writes seem
+ * to cause an abort. XXX Is this still necessary?
+ */
__delay(150000);
+
+ return ret;
}
EXPORT_SYMBOL_GPL(omap_dm_timer_set_source);
diff --git a/arch/arm/plat-omap/fb.c b/arch/arm/plat-omap/fb.c
index ce6b4baeede..3746222bed1 100644
--- a/arch/arm/plat-omap/fb.c
+++ b/arch/arm/plat-omap/fb.c
@@ -206,9 +206,10 @@ void __init omapfb_reserve_sdram(void)
config_invalid = 1;
return;
}
- if (rg.paddr)
+ if (rg.paddr) {
reserve_bootmem(rg.paddr, rg.size, BOOTMEM_DEFAULT);
- reserved += rg.size;
+ reserved += rg.size;
+ }
omapfb_config.mem_desc.region[i] = rg;
configured_regions++;
}
diff --git a/arch/arm/plat-omap/gpio.c b/arch/arm/plat-omap/gpio.c
index d3fa41e3d8c..ee0b21f5b09 100644
--- a/arch/arm/plat-omap/gpio.c
+++ b/arch/arm/plat-omap/gpio.c
@@ -307,7 +307,7 @@ static inline int gpio_valid(int gpio)
return 0;
if (cpu_is_omap24xx() && gpio < 128)
return 0;
- if (cpu_is_omap34xx() && gpio < 160)
+ if (cpu_is_omap34xx() && gpio < 192)
return 0;
return -1;
}
@@ -758,8 +758,12 @@ static void _clear_gpio_irqbank(struct gpio_bank *bank, int gpio_mask)
/* Workaround for clearing DSP GPIO interrupts to allow retention */
#if defined(CONFIG_ARCH_OMAP24XX) || defined(CONFIG_ARCH_OMAP34XX)
+ reg = bank->base + OMAP24XX_GPIO_IRQSTATUS2;
if (cpu_is_omap24xx() || cpu_is_omap34xx())
- __raw_writel(gpio_mask, bank->base + OMAP24XX_GPIO_IRQSTATUS2);
+ __raw_writel(gpio_mask, reg);
+
+ /* Flush posted write for the irq status to avoid spurious interrupts */
+ __raw_readl(reg);
#endif
}
@@ -921,13 +925,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
case METHOD_MPUIO:
case METHOD_GPIO_1610:
spin_lock_irqsave(&bank->lock, flags);
- if (enable) {
+ if (enable)
bank->suspend_wakeup |= (1 << gpio);
- enable_irq_wake(bank->irq);
- } else {
- disable_irq_wake(bank->irq);
+ else
bank->suspend_wakeup &= ~(1 << gpio);
- }
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
@@ -940,13 +941,10 @@ static int _set_gpio_wakeup(struct gpio_bank *bank, int gpio, int enable)
return -EINVAL;
}
spin_lock_irqsave(&bank->lock, flags);
- if (enable) {
+ if (enable)
bank->suspend_wakeup |= (1 << gpio);
- enable_irq_wake(bank->irq);
- } else {
- disable_irq_wake(bank->irq);
+ else
bank->suspend_wakeup &= ~(1 << gpio);
- }
spin_unlock_irqrestore(&bank->lock, flags);
return 0;
#endif
diff --git a/arch/arm/plat-omap/include/mach/dmtimer.h b/arch/arm/plat-omap/include/mach/dmtimer.h
index 6dc70313821..20f1054c0a8 100644
--- a/arch/arm/plat-omap/include/mach/dmtimer.h
+++ b/arch/arm/plat-omap/include/mach/dmtimer.h
@@ -64,7 +64,7 @@ void omap_dm_timer_trigger(struct omap_dm_timer *timer);
void omap_dm_timer_start(struct omap_dm_timer *timer);
void omap_dm_timer_stop(struct omap_dm_timer *timer);
-void omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
+int omap_dm_timer_set_source(struct omap_dm_timer *timer, int source);
void omap_dm_timer_set_load(struct omap_dm_timer *timer, int autoreload, unsigned int value);
void omap_dm_timer_set_load_start(struct omap_dm_timer *timer, int autoreload, unsigned int value);
void omap_dm_timer_set_match(struct omap_dm_timer *timer, int enable, unsigned int match);
diff --git a/arch/arm/plat-omap/include/mach/eac.h b/arch/arm/plat-omap/include/mach/eac.h
deleted file mode 100644
index 9e62cf03027..00000000000
--- a/arch/arm/plat-omap/include/mach/eac.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach2/eac.h
- *
- * Defines for Enhanced Audio Controller
- *
- * Contact: Jarkko Nikula <jarkko.nikula@nokia.com>
- *
- * Copyright (C) 2006 Nokia Corporation
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * version 2 as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful, but
- * WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
- * General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA
- * 02110-1301 USA
- *
- */
-
-#ifndef __ASM_ARM_ARCH_OMAP2_EAC_H
-#define __ASM_ARM_ARCH_OMAP2_EAC_H
-
-#include <mach/io.h>
-#include <mach/hardware.h>
-#include <asm/irq.h>
-
-#include <sound/core.h>
-
-/* master codec clock source */
-#define EAC_MCLK_EXT_MASK 0x100
-enum eac_mclk_src {
- EAC_MCLK_INT_11290000, /* internal 96 MHz / 8.5 = 11.29 Mhz */
- EAC_MCLK_EXT_11289600 = EAC_MCLK_EXT_MASK,
- EAC_MCLK_EXT_12288000,
- EAC_MCLK_EXT_2x11289600,
- EAC_MCLK_EXT_2x12288000,
-};
-
-/* codec port interface mode */
-enum eac_codec_mode {
- EAC_CODEC_PCM,
- EAC_CODEC_AC97,
- EAC_CODEC_I2S_MASTER, /* codec port, I.e. EAC is the master */
- EAC_CODEC_I2S_SLAVE,
-};
-
-/* configuration structure for I2S mode */
-struct eac_i2s_conf {
- /* if enabled, then first data slot (left channel) is signaled as
- * positive level of frame sync EAC.AC_FS */
- unsigned polarity_changed_mode:1;
- /* if enabled, then serial data starts one clock cycle after the
- * of EAC.AC_FS for first audio slot */
- unsigned sync_delay_enable:1;
-};
-
-/* configuration structure for EAC codec port */
-struct eac_codec {
- enum eac_mclk_src mclk_src;
-
- enum eac_codec_mode codec_mode;
- union {
- struct eac_i2s_conf i2s;
- } codec_conf;
-
- int default_rate; /* audio sampling rate */
-
- int (* set_power)(void *private_data, int dac, int adc);
- int (* register_controls)(void *private_data,
- struct snd_card *card);
- const char *short_name;
-
- void *private_data;
-};
-
-/* structure for passing platform dependent data to the EAC driver */
-struct eac_platform_data {
- int (* init)(struct device *eac_dev);
- void (* cleanup)(struct device *eac_dev);
- /* these callbacks are used to configure & control external MCLK
- * source. NULL if not used */
- int (* enable_ext_clocks)(struct device *eac_dev);
- void (* disable_ext_clocks)(struct device *eac_dev);
-};
-
-extern void omap_init_eac(struct eac_platform_data *pdata);
-
-extern int eac_register_codec(struct device *eac_dev, struct eac_codec *codec);
-extern void eac_unregister_codec(struct device *eac_dev);
-
-extern int eac_set_mode(struct device *eac_dev, int play, int rec);
-
-#endif /* __ASM_ARM_ARCH_OMAP2_EAC_H */
diff --git a/arch/arm/plat-omap/include/mach/gpioexpander.h b/arch/arm/plat-omap/include/mach/gpioexpander.h
deleted file mode 100644
index 90444a0d6b1..00000000000
--- a/arch/arm/plat-omap/include/mach/gpioexpander.h
+++ /dev/null
@@ -1,35 +0,0 @@
-/*
- * arch/arm/plat-omap/include/mach/gpioexpander.h
- *
- *
- * Copyright (C) 2004 Texas Instruments, Inc.
- *
- * This package is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- * THIS PACKAGE IS PROVIDED ``AS IS'' AND WITHOUT ANY EXPRESS OR
- * IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, THE IMPLIED
- * WARRANTIES OF MERCHANTIBILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef __ASM_ARCH_OMAP_GPIOEXPANDER_H
-#define __ASM_ARCH_OMAP_GPIOEXPANDER_H
-
-/* Function Prototypes for GPIO Expander functions */
-
-#ifdef CONFIG_GPIOEXPANDER_OMAP
-int read_gpio_expa(u8 *, int);
-int write_gpio_expa(u8 , int);
-#else
-static inline int read_gpio_expa(u8 *val, int addr)
-{
- return 0;
-}
-static inline int write_gpio_expa(u8 val, int addr)
-{
- return 0;
-}
-#endif
-
-#endif /* __ASM_ARCH_OMAP_GPIOEXPANDER_H */
diff --git a/arch/arm/plat-omap/include/mach/irda.h b/arch/arm/plat-omap/include/mach/irda.h
index 8372a00d8e0..40f60339d1c 100644
--- a/arch/arm/plat-omap/include/mach/irda.h
+++ b/arch/arm/plat-omap/include/mach/irda.h
@@ -21,10 +21,6 @@ struct omap_irda_config {
int transceiver_cap;
int (*transceiver_mode)(struct device *dev, int mode);
int (*select_irda)(struct device *dev, int state);
- /* Very specific to the needs of some platforms (h3,h4)
- * having calls which can sleep in irda_set_speed.
- */
- struct delayed_work gpio_expa;
int rx_channel;
int tx_channel;
unsigned long dest_start;
diff --git a/arch/arm/plat-omap/include/mach/mmc.h b/arch/arm/plat-omap/include/mach/mmc.h
index 4435bd434e1..81d5b36534b 100644
--- a/arch/arm/plat-omap/include/mach/mmc.h
+++ b/arch/arm/plat-omap/include/mach/mmc.h
@@ -79,7 +79,6 @@ struct omap_mmc_platform_data {
/* use the internal clock */
unsigned internal_clock:1;
- s16 power_pin;
int switch_pin; /* gpio (card detect) */
int gpio_wp; /* gpio (write protect) */
diff --git a/arch/arm/plat-omap/include/mach/timer-gp.h b/arch/arm/plat-omap/include/mach/timer-gp.h
new file mode 100644
index 00000000000..c88d346b59d
--- /dev/null
+++ b/arch/arm/plat-omap/include/mach/timer-gp.h
@@ -0,0 +1,17 @@
+/*
+ * OMAP2/3 GPTIMER support.headers
+ *
+ * Copyright (C) 2009 Nokia Corporation
+ *
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ */
+
+#ifndef __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
+#define __ARCH_ARM_PLAT_OMAP_INCLUDE_MACH_TIMER_GP_H
+
+int __init omap2_gp_clockevent_set_gptimer(u8 id);
+
+#endif
+
diff --git a/arch/arm/plat-pxa/gpio.c b/arch/arm/plat-pxa/gpio.c
index af819bf21b6..abc79d44aca 100644
--- a/arch/arm/plat-pxa/gpio.c
+++ b/arch/arm/plat-pxa/gpio.c
@@ -121,6 +121,8 @@ static int __init pxa_init_gpio_chip(int gpio_end)
return -ENOMEM;
}
+ memset(chips, 0, nbanks * sizeof(struct pxa_gpio_chip));
+
for (i = 0, gpio = 0; i < nbanks; i++, gpio += 32) {
struct gpio_chip *c = &chips[i].chip;
@@ -143,6 +145,21 @@ static int __init pxa_init_gpio_chip(int gpio_end)
return 0;
}
+/* Update only those GRERx and GFERx edge detection register bits if those
+ * bits are set in c->irq_mask
+ */
+static inline void update_edge_detect(struct pxa_gpio_chip *c)
+{
+ uint32_t grer, gfer;
+
+ grer = __raw_readl(c->regbase + GRER_OFFSET) & ~c->irq_mask;
+ gfer = __raw_readl(c->regbase + GFER_OFFSET) & ~c->irq_mask;
+ grer |= c->irq_edge_rise & c->irq_mask;
+ gfer |= c->irq_edge_fall & c->irq_mask;
+ __raw_writel(grer, c->regbase + GRER_OFFSET);
+ __raw_writel(gfer, c->regbase + GFER_OFFSET);
+}
+
static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
{
struct pxa_gpio_chip *c;
@@ -181,8 +198,7 @@ static int pxa_gpio_irq_type(unsigned int irq, unsigned int type)
else
c->irq_edge_fall &= ~mask;
- __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
- __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+ update_edge_detect(c);
pr_debug("%s: IRQ%d (GPIO%d) - edge%s%s\n", __func__, irq, gpio,
((type & IRQ_TYPE_EDGE_RISING) ? " rising" : ""),
@@ -244,8 +260,7 @@ static void pxa_unmask_muxed_gpio(unsigned int irq)
struct pxa_gpio_chip *c = gpio_to_chip(gpio);
c->irq_mask |= GPIO_bit(gpio);
- __raw_writel(c->irq_edge_rise & c->irq_mask, c->regbase + GRER_OFFSET);
- __raw_writel(c->irq_edge_fall & c->irq_mask, c->regbase + GFER_OFFSET);
+ update_edge_detect(c);
}
static struct irq_chip pxa_muxed_gpio_chip = {
diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c
index b6be76e2fe5..4d01ef1a25d 100644
--- a/arch/arm/plat-s3c/clock.c
+++ b/arch/arm/plat-s3c/clock.c
@@ -306,8 +306,6 @@ struct clk s3c24xx_uclk = {
int s3c24xx_register_clock(struct clk *clk)
{
- clk->owner = THIS_MODULE;
-
if (clk->enable == NULL)
clk->enable = clk_null_enable;
diff --git a/arch/arm/plat-s3c24xx/dma.c b/arch/arm/plat-s3c24xx/dma.c
index aee2aeb46c6..07326f63236 100644
--- a/arch/arm/plat-s3c24xx/dma.c
+++ b/arch/arm/plat-s3c24xx/dma.c
@@ -1235,7 +1235,7 @@ int s3c2410_dma_getposition(unsigned int channel, dma_addr_t *src, dma_addr_t *d
EXPORT_SYMBOL(s3c2410_dma_getposition);
-static struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
+static inline struct s3c2410_dma_chan *to_dma_chan(struct sys_device *dev)
{
return container_of(dev, struct s3c2410_dma_chan, dev);
}
diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c
index ee9188add8f..78ee52cffc9 100644
--- a/arch/arm/plat-s3c64xx/gpiolib.c
+++ b/arch/arm/plat-s3c64xx/gpiolib.c
@@ -57,7 +57,7 @@
#if 1
#define gpio_dbg(x...) do { } while(0)
#else
-#define gpio_dbg(x...) printk(KERN_DEBUG ## x)
+#define gpio_dbg(x...) printk(KERN_DEBUG x)
#endif
/* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where
diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
index 81549516572..2ba1767512d 100644
--- a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
+++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h
@@ -61,14 +61,14 @@
#define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28)
#define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28)
-#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 32)
-#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 32)
-#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 32)
-#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 32)
-#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 32)
-
-#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 36)
-#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 36)
-#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 36)
-#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 36)
+#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 0)
+#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 0)
+#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 0)
+#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 0)
+#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 0)
+#define S3C64XX_GPH9_OUTPUT (0x01 << 4)
+#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 4)
+#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 4)
+#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 4)
+#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 4)
diff --git a/arch/avr32/Makefile b/arch/avr32/Makefile
index 0b97e14f73f..c21a3290d54 100644
--- a/arch/avr32/Makefile
+++ b/arch/avr32/Makefile
@@ -43,8 +43,6 @@ core-y += arch/avr32/mm/
drivers-$(CONFIG_OPROFILE) += arch/avr32/oprofile/
libs-y += arch/avr32/lib/
-CLEAN_FILES += include/asm-avr32/.arch include/asm-avr32/arch
-
BOOT_TARGETS := vmlinux.elf vmlinux.bin uImage uImage.srec
.PHONY: $(BOOT_TARGETS) install
diff --git a/arch/cris/Makefile b/arch/cris/Makefile
index 3662cfb7b61..71e17d3eedd 100644
--- a/arch/cris/Makefile
+++ b/arch/cris/Makefile
@@ -70,7 +70,7 @@ SRC_ARCH = $(srctree)/arch/cris
# cris object files path
OBJ_ARCH = $(objtree)/arch/cris
-boot := arch/cris/$(SARCH)/boot
+boot := arch/cris/boot
MACHINE := arch/cris/$(SARCH)
all: zImage
@@ -81,15 +81,15 @@ zImage Image: vmlinux
archprepare:
archclean:
- $(Q)if [ -e arch/cris/$(SARCH)/boot ]; then \
- $(MAKE) $(clean)=arch/cris/$(SARCH)/boot; \
+ $(Q)if [ -e arch/cris/boot ]; then \
+ $(MAKE) $(clean)=arch/cris/boot; \
fi
CLEAN_FILES += \
- $(MACHINE)/boot/zImage \
- $(MACHINE)/boot/compressed/decompress.bin \
- $(MACHINE)/boot/compressed/piggy.gz \
- $(MACHINE)/boot/rescue/rescue.bin
+ $(boot)/zImage \
+ $(boot)/compressed/decompress.bin \
+ $(boot)/compressed/piggy.gz \
+ $(boot)/rescue/rescue.bin
# MRPROPER_FILES +=
diff --git a/arch/cris/arch-v10/boot/compressed/README b/arch/cris/arch-v10/boot/compressed/README
deleted file mode 100644
index 48b3db9924b..00000000000
--- a/arch/cris/arch-v10/boot/compressed/README
+++ /dev/null
@@ -1,25 +0,0 @@
-Creation of the self-extracting compressed kernel image (vmlinuz)
------------------------------------------------------------------
-$Id: README,v 1.1 2001/12/17 13:59:27 bjornw Exp $
-
-This can be slightly confusing because it's a process with many steps.
-
-The kernel object built by the arch/etrax100/Makefile, vmlinux, is split
-by that makefile into text and data binary files, vmlinux.text and
-vmlinux.data.
-
-Those files together with a ROM filesystem can be catted together and
-burned into a flash or executed directly at the DRAM origin.
-
-They can also be catted together and compressed with gzip, which is what
-happens in this makefile. Together they make up piggy.img.
-
-The decompressor is built into the file decompress.o. It is turned into
-the binary file decompress.bin, which is catted together with piggy.img
-into the file vmlinuz. It can be executed in an arbitrary place in flash.
-
-Be careful - it assumes some things about free locations in DRAM. It
-assumes the DRAM starts at 0x40000000 and that it is at least 8 MB,
-so it puts its code at 0x40700000, and initial stack at 0x40800000.
-
--Bjorn
diff --git a/arch/cris/arch-v10/boot/compressed/misc.c b/arch/cris/arch-v10/boot/compressed/misc.c
deleted file mode 100644
index a4db1507d3b..00000000000
--- a/arch/cris/arch-v10/boot/compressed/misc.c
+++ /dev/null
@@ -1,246 +0,0 @@
-/*
- * misc.c
- *
- * This is a collection of several routines from gzip-1.0.3
- * adapted for Linux.
- *
- * malloc by Hannu Savolainen 1993 and Matthias Urlichs 1994
- * puts by Nick Holloway 1993, better puts by Martin Mares 1995
- * adaptation for Linux/CRIS Axis Communications AB, 1999
- *
- */
-
-/* where the piggybacked kernel image expects itself to live.
- * it is the same address we use when we network load an uncompressed
- * image into DRAM, and it is the address the kernel is linked to live
- * at by vmlinux.lds.S
- */
-
-#define KERNEL_LOAD_ADR 0x40004000
-
-
-#include <linux/types.h>
-#include <arch/svinto.h>
-
-/*
- * gzip declarations
- */
-
-#define OF(args) args
-#define STATIC static
-
-void *memset(void *s, int c, size_t n);
-void *memcpy(void *__dest, __const void *__src, size_t __n);
-
-#define memzero(s, n) memset((s), 0, (n))
-
-typedef unsigned char uch;
-typedef unsigned short ush;
-typedef unsigned long ulg;
-
-#define WSIZE 0x8000 /* Window size must be at least 32k, */
- /* and a power of two */
-
-static uch *inbuf; /* input buffer */
-static uch window[WSIZE]; /* Sliding window buffer */
-
-unsigned inptr = 0; /* index of next byte to be processed in inbuf
- * After decompression it will contain the
- * compressed size, and head.S will read it.
- */
-
-static unsigned outcnt = 0; /* bytes in output buffer */
-
-/* gzip flag byte */
-#define ASCII_FLAG 0x01 /* bit 0 set: file probably ascii text */
-#define CONTINUATION 0x02 /* bit 1 set: continuation of multi-part gzip file */
-#define EXTRA_FIELD 0x04 /* bit 2 set: extra field present */
-#define ORIG_NAME 0x08 /* bit 3 set: original file name present */
-#define COMMENT 0x10 /* bit 4 set: file comment present */
-#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
-#define RESERVED 0xC0 /* bit 6,7: reserved */
-
-#define get_byte() (inbuf[inptr++])
-
-/* Diagnostic functions */
-#ifdef DEBUG
-# define Assert(cond, msg) do { \
- if (!(cond)) \
- error(msg); \
- } while (0)
-# define Trace(x) fprintf x
-# define Tracev(x) do { \
- if (verbose) \
- fprintf x; \
- } while (0)
-# define Tracevv(x) do { \
- if (verbose > 1) \
- fprintf x; \
- } while (0)
-# define Tracec(c, x) do { \
- if (verbose && (c)) \
- fprintf x; \
- } while (0)
-# define Tracecv(c, x) do { \
- if (verbose > 1 && (c)) \
- fprintf x; \
- } while (0)
-#else
-# define Assert(cond, msg)
-# define Trace(x)
-# define Tracev(x)
-# define Tracevv(x)
-# define Tracec(c, x)
-# define Tracecv(c, x)
-#endif
-
-static void flush_window(void);
-static void error(char *m);
-
-extern char *input_data; /* lives in head.S */
-
-static long bytes_out = 0;
-static uch *output_data;
-static unsigned long output_ptr = 0;
-static void puts(const char *);
-
-/* the "heap" is put directly after the BSS ends, at end */
-
-extern int _end;
-static long free_mem_ptr = (long)&_end;
-static long free_mem_end_ptr;
-
-#include "../../../../../lib/inflate.c"
-
-/* decompressor info and error messages to serial console */
-
-static void
-puts(const char *s)
-{
-#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
- while (*s) {
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
- while (!(*R_SERIAL0_STATUS & (1 << 5))) ;
- *R_SERIAL0_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
- while (!(*R_SERIAL1_STATUS & (1 << 5))) ;
- *R_SERIAL1_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
- while (!(*R_SERIAL2_STATUS & (1 << 5))) ;
- *R_SERIAL2_TR_DATA = *s++;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
- while (!(*R_SERIAL3_STATUS & (1 << 5))) ;
- *R_SERIAL3_TR_DATA = *s++;
-#endif
- }
-#endif
-}
-
-void *memset(void *s, int c, size_t n)
-{
- int i;
- char *ss = (char *)s;
-
- for (i = 0; i < n; i++)
- ss[i] = c;
-
- return s;
-}
-
-void *memcpy(void *__dest, __const void *__src, size_t __n)
-{
- int i;
- char *d = (char *)__dest, *s = (char *)__src;
-
- for (i = 0; i < __n; i++)
- d[i] = s[i];
-
- return __dest;
-}
-
-/* ===========================================================================
- * Write the output window window[0..outcnt-1] and update crc and bytes_out.
- * (Used for the decompressed data only.)
- */
-
-static void flush_window(void)
-{
- ulg c = crc; /* temporary variable */
- unsigned n;
- uch *in, *out, ch;
-
- in = window;
- out = &output_data[output_ptr];
- for (n = 0; n < outcnt; n++) {
- ch = *out = *in;
- out++;
- in++;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
- }
- crc = c;
- bytes_out += (ulg)outcnt;
- output_ptr += (ulg)outcnt;
- outcnt = 0;
-}
-
-static void error(char *x)
-{
- puts("\n\n");
- puts(x);
- puts("\n\n -- System halted\n");
-
- while (1); /* Halt */
-}
-
-void setup_normal_output_buffer(void)
-{
- output_data = (char *)KERNEL_LOAD_ADR;
-}
-
-void decompress_kernel(void)
-{
- char revision;
-
- /* input_data is set in head.S */
- inbuf = input_data;
-
-#ifdef CONFIG_ETRAX_DEBUG_PORT0
- *R_SERIAL0_XOFF = 0;
- *R_SERIAL0_BAUD = 0x99;
- *R_SERIAL0_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT1
- *R_SERIAL1_XOFF = 0;
- *R_SERIAL1_BAUD = 0x99;
- *R_SERIAL1_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT2
- *R_GEN_CONFIG = 0x08;
- *R_SERIAL2_XOFF = 0;
- *R_SERIAL2_BAUD = 0x99;
- *R_SERIAL2_TR_CTRL = 0x40;
-#endif
-#ifdef CONFIG_ETRAX_DEBUG_PORT3
- *R_GEN_CONFIG = 0x100;
- *R_SERIAL3_XOFF = 0;
- *R_SERIAL3_BAUD = 0x99;
- *R_SERIAL3_TR_CTRL = 0x40;
-#endif
-
- setup_normal_output_buffer();
-
- makecrc();
-
- __asm__ volatile ("move $vr,%0" : "=rm" (revision));
- if (revision < 10) {
- puts("You need an ETRAX 100LX to run linux 2.6\n");
- while (1);
- }
-
- puts("Uncompressing Linux...\n");
- gunzip();
- puts("Done. Now booting the kernel.\n");
-}
diff --git a/arch/cris/arch-v10/kernel/entry.S b/arch/cris/arch-v10/kernel/entry.S
index 72f5cd319b9..2c18d08cd91 100644
--- a/arch/cris/arch-v10/kernel/entry.S
+++ b/arch/cris/arch-v10/kernel/entry.S
@@ -536,10 +536,10 @@ multiple_interrupt:
movem $r13, [$sp]
push $r10 ; push orig_r10
clear.d [$sp=$sp-4] ; frametype == 0, normal frame
-
+
move.d $sp, $r10
jsr do_multiple_IRQ
-
+
jump ret_from_intr
do_sigtrap:
@@ -585,7 +585,7 @@ _ugdb_handle_breakpoint:
pop $r0 ; Restore r0.
ba do_sigtrap ; SIGTRAP the offending process.
pop $dccr ; Restore dccr in delay slot.
-
+
.global kernel_execve
kernel_execve:
move.d __NR_execve, $r9
@@ -929,6 +929,14 @@ sys_call_table:
.long sys_fallocate
.long sys_timerfd_settime /* 325 */
.long sys_timerfd_gettime
+ .long sys_signalfd4
+ .long sys_eventfd2
+ .long sys_epoll_create1
+ .long sys_dup3 /* 330 */
+ .long sys_pipe2
+ .long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev
/*
* NOTE!! This doesn't have to be exact - we just have
diff --git a/arch/cris/arch-v32/boot/Makefile b/arch/cris/arch-v32/boot/Makefile
deleted file mode 100644
index 99896ad60b3..00000000000
--- a/arch/cris/arch-v32/boot/Makefile
+++ /dev/null
@@ -1,20 +0,0 @@
-#
-# arch/cris/arch-v32/boot/Makefile
-#
-
-OBJCOPYFLAGS = -O binary -R .note -R .comment
-
-subdir- := compressed rescue
-targets := Image
-
-$(obj)/Image: vmlinux FORCE
- $(call if_changed,objcopy)
- @echo ' Kernel: $@ is ready'
-
-$(obj)/compressed/vmlinux: $(obj)/Image FORCE
- $(Q)$(MAKE) $(build)=$(obj)/compressed $@
- $(Q)$(MAKE) $(build)=$(obj)/rescue $(obj)/rescue/rescue.bin
-
-$(obj)/zImage: $(obj)/compressed/vmlinux
- @cp $< $@
- @echo ' Kernel: $@ is ready'
diff --git a/arch/cris/arch-v32/boot/compressed/Makefile b/arch/cris/arch-v32/boot/compressed/Makefile
deleted file mode 100644
index e176b8b69d9..00000000000
--- a/arch/cris/arch-v32/boot/compressed/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# arch/cris/arch-v32/boot/compressed/Makefile
-#
-
-asflags-y += -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ccflags-y += -O2 -I$(srctree)/include/asm/mach/ -I$(srctree)/include/asm/arch
-ldflags-y += -T$(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-
-quiet_cmd_image = BUILD $@
-cmd_image = cat $(obj)/decompress.bin $(obj)/piggy.gz > $@
-
-targets := vmlinux piggy.gz decompress.o decompress.bin
-
-$(obj)/decompress.o: $(OBJECTS) FORCE
- $(call if_changed,ld)
-
-$(obj)/decompress.bin: $(obj)/decompress.o FORCE
- $(call if_changed,objcopy)
-
-$(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
- $(call if_changed,image)
-
-$(obj)/piggy.gz: $(obj)/../Image FORCE
- $(call if_changed,gzip)
diff --git a/arch/cris/arch-v32/boot/rescue/Makefile b/arch/cris/arch-v32/boot/rescue/Makefile
deleted file mode 100644
index 566aac663a3..00000000000
--- a/arch/cris/arch-v32/boot/rescue/Makefile
+++ /dev/null
@@ -1,26 +0,0 @@
-#
-# Makefile for rescue (bootstrap) code
-#
-
-CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
-ccflags-y += -O2 -I $(srctree)/include/asm/arch/mach/ \
- -I $(srctree)/include/asm/arch
-asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
-LD = gcc-cris -mlinux -march=v32 -nostdlib
-ldflags-y += -T $(srctree)/$(src)/rescue.lds
-LDPOSTFLAGS = -lgcc
-OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
-OBJECT := $(obj)/head.o
-
-targets := rescue.o rescue.bin
-
-quiet_cmd_ldlibgcc = LD $@
-cmd_ldlibgcc = $(LD) $(LDFLAGS) $(filter-out FORCE,$^) $(LDPOSTFLAGS) -o $@
-
-$(obj)/rescue.o: $(OBJECTS) FORCE
- $(call if_changed,ldlibgcc)
-
-$(obj)/rescue.bin: $(obj)/rescue.o FORCE
- $(call if_changed,objcopy)
- cp -p $(obj)/rescue.bin $(objtree)
diff --git a/arch/cris/arch-v32/drivers/mach-a3/gpio.c b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
index 7a87bc0ae2e..97357cfd17b 100644
--- a/arch/cris/arch-v32/drivers/mach-a3/gpio.c
+++ b/arch/cris/arch-v32/drivers/mach-a3/gpio.c
@@ -681,7 +681,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
shadow |= ~readl(dir_oe[priv->minor]) |
(arg & changeable_bits[priv->minor]);
i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- spin_lock_irqrestore(&gpio_lock, flags);
+ spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_CLRBITS:
spin_lock_irqsave(&gpio_lock, flags);
@@ -690,7 +690,7 @@ static int virtual_gpio_ioctl(struct file *file, unsigned int cmd,
shadow |= ~readl(dir_oe[priv->minor]) &
~(arg & changeable_bits[priv->minor]);
i2c_write(VIRT_I2C_ADDR, (void *)&shadow, sizeof(shadow));
- spin_lock_irqrestore(&gpio_lock, flags);
+ spin_unlock_irqrestore(&gpio_lock, flags);
break;
case IO_HIGHALARM:
/* Set alarm when bits with 1 in arg go high. */
diff --git a/arch/cris/arch-v32/kernel/Makefile b/arch/cris/arch-v32/kernel/Makefile
index 993d987b007..40358355d0c 100644
--- a/arch/cris/arch-v32/kernel/Makefile
+++ b/arch/cris/arch-v32/kernel/Makefile
@@ -9,8 +9,6 @@ obj-y := entry.o traps.o irq.o debugport.o \
process.o ptrace.o setup.o signal.o traps.o time.o \
cache.o cacheflush.o
-obj-$(CONFIG_ETRAXFS_SIM) += vcs_hook.o
-
obj-$(CONFIG_SMP) += smp.o
obj-$(CONFIG_ETRAX_KGDB) += kgdb.o kgdb_asm.o
obj-$(CONFIG_ETRAX_FAST_TIMER) += fasttimer.o
diff --git a/arch/cris/arch-v32/kernel/entry.S b/arch/cris/arch-v32/kernel/entry.S
index 5e674c8f7c5..435b9671bd4 100644
--- a/arch/cris/arch-v32/kernel/entry.S
+++ b/arch/cris/arch-v32/kernel/entry.S
@@ -852,6 +852,14 @@ sys_call_table:
.long sys_fallocate
.long sys_timerfd_settime /* 325 */
.long sys_timerfd_gettime
+ .long sys_signalfd4
+ .long sys_eventfd2
+ .long sys_epoll_create1
+ .long sys_dup3 /* 330 */
+ .long sys_pipe2
+ .long sys_inotify_init1
+ .long sys_preadv
+ .long sys_pwritev
/*
* NOTE!! This doesn't have to be exact - we just have
diff --git a/arch/cris/arch-v10/boot/.gitignore b/arch/cris/boot/.gitignore
index 171a0853caf..171a0853caf 100644
--- a/arch/cris/arch-v10/boot/.gitignore
+++ b/arch/cris/boot/.gitignore
diff --git a/arch/cris/arch-v10/boot/Makefile b/arch/cris/boot/Makefile
index 21720301443..144f3afa011 100644
--- a/arch/cris/arch-v10/boot/Makefile
+++ b/arch/cris/boot/Makefile
@@ -1,8 +1,12 @@
#
-# arch/cris/arch-v10/boot/Makefile
+# arch/cris/boot/Makefile
#
-OBJCOPYFLAGS = -O binary --remove-section=.bss
+objcopyflags-$(CONFIG_ETRAX_ARCH_V10) += -R .note -R .comment
+objcopyflags-$(CONFIG_ETRAX_ARCH_V32) += --remove-section=.bss
+
+OBJCOPYFLAGS = -O binary $(objcopyflags-y)
+
subdir- := compressed rescue
targets := Image
diff --git a/arch/cris/arch-v10/boot/compressed/Makefile b/arch/cris/boot/compressed/Makefile
index 6fe0ffaf3be..8fe9338c177 100644
--- a/arch/cris/arch-v10/boot/compressed/Makefile
+++ b/arch/cris/boot/compressed/Makefile
@@ -1,11 +1,23 @@
#
-# arch/cris/arch-v10/boot/compressed/Makefile
+# arch/cris/boot/compressed/Makefile
#
asflags-y += $(LINUXINCLUDE)
ccflags-y += -O2 $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(src)/decompress.lds
-OBJECTS = $(obj)/head.o $(obj)/misc.o
+
+# asflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/mach \
+# -I$(srctree)/include/asm/arch
+# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -O2 -I$(srctree)/include/asm/mach
+# -I$(srctree)/include/asm/arch
+
+arch-$(CONFIG_ETRAX_ARCH_V10) = v10
+arch-$(CONFIG_ETRAX_ARCH_V32) = v32
+
+ldflags-y += -T $(srctree)/$(src)/decompress_$(arch-y).lds
+
+OBJECTS-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+OBJECTS-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+OBJECTS= $(OBJECTS-y) $(obj)/misc.o
OBJCOPYFLAGS = -O binary --remove-section=.bss
quiet_cmd_image = BUILD $@
@@ -24,4 +36,3 @@ $(obj)/vmlinux: $(obj)/piggy.gz $(obj)/decompress.bin FORCE
$(obj)/piggy.gz: $(obj)/../Image FORCE
$(call if_changed,gzip)
-
diff --git a/arch/cris/arch-v32/boot/compressed/README b/arch/cris/boot/compressed/README
index 182c5d75784..182c5d75784 100644
--- a/arch/cris/arch-v32/boot/compressed/README
+++ b/arch/cris/boot/compressed/README
diff --git a/arch/cris/arch-v10/boot/compressed/decompress.lds b/arch/cris/boot/compressed/decompress_v10.lds
index e80f4594d54..e80f4594d54 100644
--- a/arch/cris/arch-v10/boot/compressed/decompress.lds
+++ b/arch/cris/boot/compressed/decompress_v10.lds
diff --git a/arch/cris/arch-v32/boot/compressed/decompress.lds b/arch/cris/boot/compressed/decompress_v32.lds
index 3c837feca3a..3c837feca3a 100644
--- a/arch/cris/arch-v32/boot/compressed/decompress.lds
+++ b/arch/cris/boot/compressed/decompress_v32.lds
diff --git a/arch/cris/arch-v10/boot/compressed/head.S b/arch/cris/boot/compressed/head_v10.S
index 0bb4dcc2925..9edb8ade7e1 100644
--- a/arch/cris/arch-v10/boot/compressed/head.S
+++ b/arch/cris/boot/compressed/head_v10.S
@@ -30,7 +30,7 @@
beq dram_init_finished
nop
-#include "../../lib/dram_init.S"
+#include "../../arch-v10/lib/dram_init.S"
dram_init_finished:
@@ -123,4 +123,4 @@ _cmd_line_magic:
.dword 0
_cmd_line_addr:
.dword 0
-#include "../../lib/hw_settings.S"
+#include "../../arch-v10/lib/hw_settings.S"
diff --git a/arch/cris/arch-v32/boot/compressed/head.S b/arch/cris/boot/compressed/head_v32.S
index a4a65c5c669..f483005f3d4 100644
--- a/arch/cris/arch-v32/boot/compressed/head.S
+++ b/arch/cris/boot/compressed/head_v32.S
@@ -17,7 +17,7 @@
.globl input_data
.text
-_start:
+start:
di
;; Start clocks for used blocks.
@@ -29,9 +29,9 @@ _start:
nop
#if defined CONFIG_ETRAXFS
-#include "../../mach-fs/dram_init.S"
+#include "../../arch-v32/mach-fs/dram_init.S"
#elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/dram_init.S"
+#include "../../arch-v32/mach-a3/dram_init.S"
#else
#error Only ETRAXFS and ARTPEC-3 supported!
#endif
@@ -137,9 +137,9 @@ _boot_source:
.dword 0
#if defined CONFIG_ETRAXFS
-#include "../../mach-fs/hw_settings.S"
+#include "../../arch-v32/mach-fs/hw_settings.S"
#elif defined CONFIG_CRIS_MACH_ARTPEC3
-#include "../../mach-a3/hw_settings.S"
+#include "../../arch-v32/mach-a3/hw_settings.S"
#else
#error Only ETRAXFS and ARTPEC-3 supported!
#endif
diff --git a/arch/cris/arch-v32/boot/compressed/misc.c b/arch/cris/boot/compressed/misc.c
index 3595e16e82b..47bc190ba6d 100644
--- a/arch/cris/arch-v32/boot/compressed/misc.c
+++ b/arch/cris/boot/compressed/misc.c
@@ -18,8 +18,9 @@
#define KERNEL_LOAD_ADR 0x40004000
-
#include <linux/types.h>
+
+#ifdef CONFIG_ETRAX_ARCH_V32
#include <hwregs/reg_rdwr.h>
#include <hwregs/reg_map.h>
#include <hwregs/ser_defs.h>
@@ -27,6 +28,9 @@
#ifdef CONFIG_CRIS_MACH_ARTPEC3
#include <hwregs/clkgen_defs.h>
#endif
+#else
+#include <arch/svinto.h>
+#endif
/*
* gzip declarations
@@ -35,12 +39,10 @@
#define OF(args) args
#define STATIC static
-void* memset(void* s, int c, size_t n);
-void* memcpy(void* __dest, __const void* __src,
- size_t __n);
-
-#define memzero(s, n) memset ((s), 0, (n))
+void *memset(void *s, int c, size_t n);
+void *memcpy(void *__dest, __const void *__src, size_t __n);
+#define memzero(s, n) memset((s), 0, (n))
typedef unsigned char uch;
typedef unsigned short ush;
@@ -68,27 +70,43 @@ static unsigned outcnt = 0; /* bytes in output buffer */
#define ENCRYPTED 0x20 /* bit 5 set: file is encrypted */
#define RESERVED 0xC0 /* bit 6,7: reserved */
-#define get_byte() inbuf[inptr++]
+#define get_byte() (inbuf[inptr++])
/* Diagnostic functions */
#ifdef DEBUG
-# define Assert(cond,msg) {if(!(cond)) error(msg);}
+# define Assert(cond, msg) do { \
+ if (!(cond)) \
+ error(msg); \
+ } while (0)
# define Trace(x) fprintf x
-# define Tracev(x) {if (verbose) fprintf x ;}
-# define Tracevv(x) {if (verbose>1) fprintf x ;}
-# define Tracec(c,x) {if (verbose && (c)) fprintf x ;}
-# define Tracecv(c,x) {if (verbose>1 && (c)) fprintf x ;}
+# define Tracev(x) do { \
+ if (verbose) \
+ fprintf x; \
+ } while (0)
+# define Tracevv(x) do { \
+ if (verbose > 1) \
+ fprintf x; \
+ } while (0)
+# define Tracec(c, x) do { \
+ if (verbose && (c)) \
+ fprintf x; \
+ } while (0)
+# define Tracecv(c, x) do { \
+ if (verbose > 1 && (c)) \
+ fprintf x; \
+ } while (0)
#else
-# define Assert(cond,msg)
+# define Assert(cond, msg)
# define Trace(x)
# define Tracev(x)
# define Tracevv(x)
-# define Tracec(c,x)
-# define Tracecv(c,x)
+# define Tracec(c, x)
+# define Tracecv(c, x)
#endif
static void flush_window(void);
static void error(char *m);
+static void puts(const char *);
extern char *input_data; /* lives in head.S */
@@ -96,10 +114,6 @@ static long bytes_out;
static uch *output_data;
static unsigned long output_ptr;
-static void error(char *m);
-
-static void puts(const char *);
-
/* the "heap" is put directly after the BSS ends, at end */
extern int _end;
@@ -110,8 +124,8 @@ static long free_mem_end_ptr;
/* decompressor info and error messages to serial console */
-static inline void
-serout(const char *s, reg_scope_instances regi_ser)
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serout(const char *s, reg_scope_instances regi_ser)
{
reg_ser_rs_stat_din rs;
reg_ser_rw_dout dout = {.data = *s};
@@ -123,23 +137,47 @@ serout(const char *s, reg_scope_instances regi_ser)
REG_WR(ser, regi_ser, rw_dout, dout);
}
+#endif
-static void
-puts(const char *s)
+static void puts(const char *s)
{
#ifndef CONFIG_ETRAX_DEBUG_PORT_NULL
while (*s) {
#ifdef CONFIG_ETRAX_DEBUG_PORT0
+#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser0);
+#else
+ while (!(*R_SERIAL0_STATUS & (1 << 5)))
+ ;
+ *R_SERIAL0_TR_DATA = *s++;
+#endif
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT1
+#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser1);
+#else
+ while (!(*R_SERIAL1_STATUS & (1 << 5)))
+ ;
+ *R_SERIAL1_TR_DATA = *s++;
+#endif
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT2
+#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser2);
+#else
+ while (!(*R_SERIAL2_STATUS & (1 << 5)))
+ ;
+ *R_SERIAL2_TR_DATA = *s++;
+#endif
#endif
#ifdef CONFIG_ETRAX_DEBUG_PORT3
+#ifdef CONFIG_ETRAX_ARCH_V32
serout(s, regi_ser3);
+#else
+ while (!(*R_SERIAL3_STATUS & (1 << 5)))
+ ;
+ *R_SERIAL3_TR_DATA = *s++;
+#endif
#endif
*s++;
}
@@ -147,8 +185,7 @@ puts(const char *s)
#endif
}
-void*
-memset(void* s, int c, size_t n)
+void *memset(void *s, int c, size_t n)
{
int i;
char *ss = (char*)s;
@@ -158,14 +195,13 @@ memset(void* s, int c, size_t n)
return s;
}
-void*
-memcpy(void* __dest, __const void* __src,
- size_t __n)
+void *memcpy(void *__dest, __const void *__src, size_t __n)
{
int i;
char *d = (char *)__dest, *s = (char *)__src;
- for (i=0;i<__n;i++) d[i] = s[i];
+ for (i = 0; i < __n; i++)
+ d[i] = s[i];
return __dest;
}
@@ -175,43 +211,42 @@ memcpy(void* __dest, __const void* __src,
* (Used for the decompressed data only.)
*/
-static void
-flush_window()
+static void flush_window(void)
{
- ulg c = crc; /* temporary variable */
- unsigned n;
- uch *in, *out, ch;
-
- in = window;
- out = &output_data[output_ptr];
- for (n = 0; n < outcnt; n++) {
- ch = *out++ = *in++;
- c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
- }
- crc = c;
- bytes_out += (ulg)outcnt;
- output_ptr += (ulg)outcnt;
- outcnt = 0;
+ ulg c = crc; /* temporary variable */
+ unsigned n;
+ uch *in, *out, ch;
+
+ in = window;
+ out = &output_data[output_ptr];
+ for (n = 0; n < outcnt; n++) {
+ ch = *out = *in;
+ out++;
+ in++;
+ c = crc_32_tab[((int)c ^ ch) & 0xff] ^ (c >> 8);
+ }
+ crc = c;
+ bytes_out += (ulg)outcnt;
+ output_ptr += (ulg)outcnt;
+ outcnt = 0;
}
-static void
-error(char *x)
+static void error(char *x)
{
- puts("\r\n\n");
+ puts("\n\n");
puts(x);
- puts("\r\n\n -- System halted\n");
+ puts("\n\n -- System halted\n");
while(1); /* Halt */
}
-void
-setup_normal_output_buffer(void)
+void setup_normal_output_buffer(void)
{
output_data = (char *)KERNEL_LOAD_ADR;
}
-static inline void
-serial_setup(reg_scope_instances regi_ser)
+#ifdef CONFIG_ETRAX_ARCH_V32
+static inline void serial_setup(reg_scope_instances regi_ser)
{
reg_ser_rw_xoff xoff;
reg_ser_rw_tr_ctrl tr_ctrl;
@@ -252,12 +287,16 @@ serial_setup(reg_scope_instances regi_ser)
REG_WR(ser, regi_ser, rw_rec_ctrl, rec_ctrl);
REG_WR(ser, regi_ser, rw_rec_baud_div, rec_baud);
}
+#endif
-void
-decompress_kernel(void)
+void decompress_kernel(void)
{
char revision;
+ char compile_rev;
+#ifdef CONFIG_ETRAX_ARCH_V32
+ /* Need at least a CRISv32 to run. */
+ compile_rev = 32;
#if defined(CONFIG_ETRAX_DEBUG_PORT1) || \
defined(CONFIG_ETRAX_DEBUG_PORT2) || \
defined(CONFIG_ETRAX_DEBUG_PORT3)
@@ -277,6 +316,7 @@ decompress_kernel(void)
hwprot = REG_RD(pinmux, regi_pinmux, rw_hwprot);
#endif
+
#ifdef CONFIG_ETRAX_DEBUG_PORT0
serial_setup(regi_ser0);
#endif
@@ -300,19 +340,52 @@ decompress_kernel(void)
/* input_data is set in head.S */
inbuf = input_data;
+#else /* CRISv10 */
+ /* Need at least a crisv10 to run. */
+ compile_rev = 10;
+
+ /* input_data is set in head.S */
+ inbuf = input_data;
+
+#ifdef CONFIG_ETRAX_DEBUG_PORT0
+ *R_SERIAL0_XOFF = 0;
+ *R_SERIAL0_BAUD = 0x99;
+ *R_SERIAL0_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT1
+ *R_SERIAL1_XOFF = 0;
+ *R_SERIAL1_BAUD = 0x99;
+ *R_SERIAL1_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT2
+ *R_GEN_CONFIG = 0x08;
+ *R_SERIAL2_XOFF = 0;
+ *R_SERIAL2_BAUD = 0x99;
+ *R_SERIAL2_TR_CTRL = 0x40;
+#endif
+#ifdef CONFIG_ETRAX_DEBUG_PORT3
+ *R_GEN_CONFIG = 0x100;
+ *R_SERIAL3_XOFF = 0;
+ *R_SERIAL3_BAUD = 0x99;
+ *R_SERIAL3_TR_CTRL = 0x40;
+#endif
+#endif
setup_normal_output_buffer();
makecrc();
__asm__ volatile ("move $vr,%0" : "=rm" (revision));
- if (revision < 32)
- {
- puts("You need an ETRAX FS to run Linux 2.6/crisv32.\r\n");
+ if (revision < compile_rev) {
+#ifdef CONFIG_ETRAX_ARCH_V32
+ puts("You need an ETRAX FS to run Linux 2.6/crisv32\n");
+#else
+ puts("You need an ETRAX 100LX to run linux 2.6\n");
+#endif
while(1);
}
- puts("Uncompressing Linux...\r\n");
+ puts("Uncompressing Linux...\n");
gunzip();
- puts("Done. Now booting the kernel.\r\n");
+ puts("Done. Now booting the kernel\n");
}
diff --git a/arch/cris/arch-v10/boot/rescue/Makefile b/arch/cris/boot/rescue/Makefile
index 82ab59b968e..52bd0bd1dd2 100644
--- a/arch/cris/arch-v10/boot/rescue/Makefile
+++ b/arch/cris/boot/rescue/Makefile
@@ -2,16 +2,26 @@
# Makefile for rescue (bootstrap) code
#
-ccflags-y += -O2 $(LINUXINCLUDE)
+# CC = gcc-cris -mlinux -march=v32 $(LINUXINCLUDE)
+# ccflags-$(CONFIG_ETRAX_ARCH_V32) += -I$(srctree)/include/asm/arch/mach/ \
+# -I$(srctree)/include/asm/arch
+# asflags-y += -I $(srctree)/include/asm/arch/mach/ -I $(srctree)/include/asm/arch
+# LD = gcc-cris -mlinux -march=v32 -nostdlib
+
asflags-y += $(LINUXINCLUDE)
-ldflags-y += -T $(srctree)/$(src)/rescue.lds
+ccflags-y += -O2 $(LINUXINCLUDE)
+arch-$(CONFIG_ETRAX_ARCH_V10) = v10
+arch-$(CONFIG_ETRAX_ARCH_V32) = v32
+
+ldflags-y += -T $(srctree)/$(src)/rescue_$(arch-y).lds
OBJCOPYFLAGS = -O binary --remove-section=.bss
-obj-$(CONFIG_ETRAX_AXISFLASHMAP) = head.o
-OBJECT := $(obj)/head.o
+obj-$(CONFIG_ETRAX_ARCH_V32) = $(obj)/head_v32.o
+obj-$(CONFIG_ETRAX_ARCH_V10) = $(obj)/head_v10.o
+OBJECTS := $(obj-y)
targets := rescue.o rescue.bin
-$(obj)/rescue.o: $(OBJECT) FORCE
+$(obj)/rescue.o: $(OBJECTS) FORCE
$(call if_changed,ld)
$(obj)/rescue.bin: $(obj)/rescue.o FORCE
@@ -26,6 +36,7 @@ $(obj)/testrescue.bin: $(obj)/testrescue.o
dd if=testrescue_tmp.bin of=$(obj)/testrescue.bin bs=1 count=784
rm tr.bin tmp2423 testrescue_tmp.bin
+
$(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
$(OBJCOPY) $(OBJCOPYFLAGS) $(obj)/kimagerescue.o ktr.bin
# Pad it to 784 bytes, that's what the rescue loader expects
@@ -33,3 +44,4 @@ $(obj)/kimagerescue.bin: $(obj)/kimagerescue.o
cat ktr.bin tmp2423 >kimagerescue_tmp.bin
dd if=kimagerescue_tmp.bin of=$(obj)/kimagerescue.bin bs=1 count=784
rm ktr.bin tmp2423 kimagerescue_tmp.bin
+
diff --git a/arch/cris/arch-v10/boot/rescue/head.S b/arch/cris/boot/rescue/head_v10.S
index fb503d1eeea..2fafe247a25 100644
--- a/arch/cris/arch-v10/boot/rescue/head.S
+++ b/arch/cris/boot/rescue/head_v10.S
@@ -155,7 +155,7 @@ no_newjump:
#endif
;; We need to setup the bus registers before we start using the DRAM
-#include "../../lib/dram_init.S"
+#include "../../../arch-v10/lib/dram_init.S"
;; we now should go through the checksum-table and check the listed
;; partitions for errors.
diff --git a/arch/cris/arch-v32/boot/rescue/head.S b/arch/cris/boot/rescue/head_v32.S
index 5f846b7700a..5f846b7700a 100644
--- a/arch/cris/arch-v32/boot/rescue/head.S
+++ b/arch/cris/boot/rescue/head_v32.S
diff --git a/arch/cris/arch-v10/boot/rescue/kimagerescue.S b/arch/cris/boot/rescue/kimagerescue.S
index 6f7b3e61260..6f7b3e61260 100644
--- a/arch/cris/arch-v10/boot/rescue/kimagerescue.S
+++ b/arch/cris/boot/rescue/kimagerescue.S
diff --git a/arch/cris/arch-v10/boot/rescue/rescue.lds b/arch/cris/boot/rescue/rescue_v10.lds
index 0b52a9490db..0b52a9490db 100644
--- a/arch/cris/arch-v10/boot/rescue/rescue.lds
+++ b/arch/cris/boot/rescue/rescue_v10.lds
diff --git a/arch/cris/arch-v32/boot/rescue/rescue.lds b/arch/cris/boot/rescue/rescue_v32.lds
index 8ac646bc1a2..8ac646bc1a2 100644
--- a/arch/cris/arch-v32/boot/rescue/rescue.lds
+++ b/arch/cris/boot/rescue/rescue_v32.lds
diff --git a/arch/cris/arch-v10/boot/rescue/testrescue.S b/arch/cris/boot/rescue/testrescue.S
index fc7ec674eca..fc7ec674eca 100644
--- a/arch/cris/arch-v10/boot/rescue/testrescue.S
+++ b/arch/cris/boot/rescue/testrescue.S
diff --git a/arch/cris/arch-v10/boot/tools/build.c b/arch/cris/boot/tools/build.c
index c8adef36416..c8adef36416 100644
--- a/arch/cris/arch-v10/boot/tools/build.c
+++ b/arch/cris/boot/tools/build.c
diff --git a/arch/cris/include/asm/unistd.h b/arch/cris/include/asm/unistd.h
index 235d076379d..c17079388bb 100644
--- a/arch/cris/include/asm/unistd.h
+++ b/arch/cris/include/asm/unistd.h
@@ -281,7 +281,7 @@
#define __NR_mbind 274
#define __NR_get_mempolicy 275
#define __NR_set_mempolicy 276
-#define __NR_mq_open 277
+#define __NR_mq_open 277
#define __NR_mq_unlink (__NR_mq_open+1)
#define __NR_mq_timedsend (__NR_mq_open+2)
#define __NR_mq_timedreceive (__NR_mq_open+3)
@@ -331,10 +331,18 @@
#define __NR_fallocate 324
#define __NR_timerfd_settime 325
#define __NR_timerfd_gettime 326
+#define __NR_signalfd4 327
+#define __NR_eventfd2 328
+#define __NR_epoll_create1 329
+#define __NR_dup3 330
+#define __NR_pipe2 331
+#define __NR_inotify_init1 332
+#define __NR_preadv 333
+#define __NR_pwritev 334
#ifdef __KERNEL__
-#define NR_syscalls 327
+#define NR_syscalls 335
#include <arch/unistd.h>
diff --git a/arch/ia64/include/asm/idle.h b/arch/ia64/include/asm/idle.h
new file mode 100644
index 00000000000..b7685015a8b
--- /dev/null
+++ b/arch/ia64/include/asm/idle.h
@@ -0,0 +1,7 @@
+#ifndef _ASM_IA64_IDLE_H
+#define _ASM_IA64_IDLE_H
+
+static inline void enter_idle(void) { }
+static inline void exit_idle(void) { }
+
+#endif /* _ASM_IA64_IDLE_H */
diff --git a/arch/ia64/include/asm/xen/events.h b/arch/ia64/include/asm/xen/events.h
index 73248781fba..b8370c8b619 100644
--- a/arch/ia64/include/asm/xen/events.h
+++ b/arch/ia64/include/asm/xen/events.h
@@ -36,14 +36,9 @@ static inline int xen_irqs_disabled(struct pt_regs *regs)
return !(ia64_psr(regs)->i);
}
-static inline void xen_do_IRQ(int irq, struct pt_regs *regs)
+static inline void handle_irq(int irq, struct pt_regs *regs)
{
- struct pt_regs *old_regs;
- old_regs = set_irq_regs(regs);
- irq_enter();
__do_IRQ(irq);
- irq_exit();
- set_irq_regs(old_regs);
}
#define irq_ctx_init(cpu) do { } while (0)
diff --git a/arch/ia64/xen/xensetup.S b/arch/ia64/xen/xensetup.S
index 28fed1fcc07..aff8346ea19 100644
--- a/arch/ia64/xen/xensetup.S
+++ b/arch/ia64/xen/xensetup.S
@@ -54,8 +54,6 @@ END(startup_xen)
#define isBP p3 // are we the Bootstrap Processor?
- .text
-
GLOBAL_ENTRY(xen_setup_hook)
mov r8=XEN_PV_DOMAIN_ASM
(isBP) movl r9=xen_domain_type;;
diff --git a/arch/m32r/boot/compressed/Makefile b/arch/m32r/boot/compressed/Makefile
index d908e1d3c07..560484ae35e 100644
--- a/arch/m32r/boot/compressed/Makefile
+++ b/arch/m32r/boot/compressed/Makefile
@@ -6,7 +6,6 @@
targets := vmlinux vmlinux.bin vmlinux.bin.gz head.o misc.o \
piggy.o vmlinux.lds
-EXTRA_AFLAGS := -traditional
OBJECTS = $(obj)/head.o $(obj)/misc.o
diff --git a/arch/m32r/include/asm/assembler.h b/arch/m32r/include/asm/assembler.h
index 26351539b5f..728799fc70a 100644
--- a/arch/m32r/include/asm/assembler.h
+++ b/arch/m32r/include/asm/assembler.h
@@ -9,14 +9,15 @@
* This file contains M32R architecture specific macro definitions.
*/
+#include <linux/stringify.h>
+
+#undef __STR
-#ifndef __STR
#ifdef __ASSEMBLY__
#define __STR(x) x
#else
-#define __STR(x) #x
+#define __STR(x) __stringify(x)
#endif
-#endif /* __STR */
#ifdef CONFIG_SMP
#define M32R_LOCK __STR(lock)
diff --git a/arch/m32r/kernel/Makefile b/arch/m32r/kernel/Makefile
index 09200d4886e..b1a4b603659 100644
--- a/arch/m32r/kernel/Makefile
+++ b/arch/m32r/kernel/Makefile
@@ -9,5 +9,3 @@ obj-y := process.o entry.o traps.o align.o irq.o setup.o time.o \
obj-$(CONFIG_SMP) += smp.o smpboot.o
obj-$(CONFIG_MODULES) += module.o
-
-EXTRA_AFLAGS := -traditional
diff --git a/arch/microblaze/configs/nommu_defconfig b/arch/microblaze/configs/nommu_defconfig
index beb7ecd7279..4ef6af0a8f3 100644
--- a/arch/microblaze/configs/nommu_defconfig
+++ b/arch/microblaze/configs/nommu_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29
-# Tue Mar 24 10:23:20 2009
+# Linux kernel version: 2.6.30-rc5
+# Mon May 11 09:01:02 2009
#
CONFIG_MICROBLAZE=y
# CONFIG_SWAP is not set
@@ -32,6 +32,7 @@ CONFIG_LOCALVERSION_AUTO=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
@@ -63,6 +64,7 @@ CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -80,6 +82,8 @@ CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -92,7 +96,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -166,6 +169,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4
# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=0
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_NOMMU_INITIAL_TRIM_EXCESS=1
#
# Exectuable file formats
@@ -180,7 +185,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -232,6 +236,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -244,7 +249,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -379,6 +383,7 @@ CONFIG_MISC_DEVICES=y
# CONFIG_ATA is not set
# CONFIG_MD is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -388,6 +393,7 @@ CONFIG_NETDEVICES=y
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
# CONFIG_MII is not set
+# CONFIG_ETHOC is not set
# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
@@ -405,7 +411,6 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -455,6 +460,7 @@ CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_RTC is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
@@ -525,7 +531,7 @@ CONFIG_USB_SUPPORT=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -538,6 +544,7 @@ CONFIG_USB_SUPPORT=y
# CONFIG_ACCESSIBILITY is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -563,6 +570,11 @@ CONFIG_FILE_LOCKING=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -601,8 +613,13 @@ CONFIG_CRAMFS=y
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=y
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -614,7 +631,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -647,6 +663,9 @@ CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
CONFIG_SCHEDSTATS=y
CONFIG_TIMER_STATS=y
@@ -678,15 +697,8 @@ CONFIG_DEBUG_SG=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
-
-#
-# Tracers
-#
-# CONFIG_SCHED_TRACER is not set
-# CONFIG_CONTEXT_SWITCH_TRACER is not set
-# CONFIG_BOOT_TRACER is not set
-# CONFIG_TRACE_BRANCH_PROFILING is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_PAGE_POISONING is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_EARLY_PRINTK=y
CONFIG_HEART_BEAT=y
@@ -777,6 +789,7 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
@@ -784,6 +797,7 @@ CONFIG_CRYPTO=y
#
# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -797,8 +811,8 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
diff --git a/arch/microblaze/include/asm/of_platform.h b/arch/microblaze/include/asm/of_platform.h
index 187c0eedaec..37491276c6c 100644
--- a/arch/microblaze/include/asm/of_platform.h
+++ b/arch/microblaze/include/asm/of_platform.h
@@ -36,16 +36,6 @@ static const struct of_device_id of_default_bus_ids[] = {
{},
};
-/* Platform drivers register/unregister */
-static inline int of_register_platform_driver(struct of_platform_driver *drv)
-{
- return of_register_driver(drv, &of_platform_bus_type);
-}
-static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
-{
- of_unregister_driver(drv);
-}
-
/* Platform devices and busses creation */
extern struct of_device *of_platform_device_create(struct device_node *np,
const char *bus_id,
diff --git a/arch/microblaze/kernel/cpu/cpuinfo-static.c b/arch/microblaze/kernel/cpu/cpuinfo-static.c
index cfe44effdb7..450ca6bb828 100644
--- a/arch/microblaze/kernel/cpu/cpuinfo-static.c
+++ b/arch/microblaze/kernel/cpu/cpuinfo-static.c
@@ -14,8 +14,8 @@
#include <asm/cpuinfo.h>
#include <asm/pvr.h>
-const static char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
-const static char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
+static const char family_string[] = CONFIG_XILINX_MICROBLAZE0_FAMILY;
+static const char cpu_ver_string[] = CONFIG_XILINX_MICROBLAZE0_HW_VER;
#define err_printk(x) \
early_printk("ERROR: Microblaze " x "- different for kernel and DTS\n");
diff --git a/arch/microblaze/kernel/intc.c b/arch/microblaze/kernel/intc.c
index a69d3e3c2fd..b15605299a5 100644
--- a/arch/microblaze/kernel/intc.c
+++ b/arch/microblaze/kernel/intc.c
@@ -137,8 +137,8 @@ void __init init_IRQ(void)
intr_type =
*(int *) of_get_property(intc, "xlnx,kind-of-intr", NULL);
- if (intr_type >= (1 << nr_irq))
- printk(KERN_INFO " ERROR: Mishmash in king-of-intr param\n");
+ if (intr_type >= (1 << (nr_irq + 1)))
+ printk(KERN_INFO " ERROR: Mismatch in kind-of-intr param\n");
#ifdef CONFIG_SELFMOD_INTC
selfmod_function((int *) arr_func, intc_baseaddr);
diff --git a/arch/microblaze/kernel/sys_microblaze.c b/arch/microblaze/kernel/sys_microblaze.c
index ba0568c2cc1..31905ff590b 100644
--- a/arch/microblaze/kernel/sys_microblaze.c
+++ b/arch/microblaze/kernel/sys_microblaze.c
@@ -131,7 +131,7 @@ sys_ipc(uint call, int first, int second, int third, void *ptr, long fifth)
ret = sys_shmctl(first, second, (struct shmid_ds *) ptr);
break;
}
- return -EINVAL;
+ return ret;
}
asmlinkage int sys_vfork(struct pt_regs *regs)
diff --git a/arch/mips/Kconfig b/arch/mips/Kconfig
index 998e5db8cc0..09b1287a92c 100644
--- a/arch/mips/Kconfig
+++ b/arch/mips/Kconfig
@@ -1411,13 +1411,12 @@ config PAGE_SIZE_4KB
config PAGE_SIZE_8KB
bool "8kB"
- depends on EXPERIMENTAL && CPU_R8000
+ depends on (EXPERIMENTAL && CPU_R8000) || CPU_CAVIUM_OCTEON
help
Using 8kB page size will result in higher performance kernel at
the price of higher memory consumption. This option is available
- only on the R8000 processor. Not that at the time of this writing
- this option is still high experimental; there are also issues with
- compatibility of user applications.
+ only on R8000 and cnMIPS processors. Note that you will need a
+ suitable Linux distribution to support this.
config PAGE_SIZE_16KB
bool "16kB"
@@ -1428,6 +1427,15 @@ config PAGE_SIZE_16KB
all non-R3000 family processors. Note that you will need a suitable
Linux distribution to support this.
+config PAGE_SIZE_32KB
+ bool "32kB"
+ depends on CPU_CAVIUM_OCTEON
+ help
+ Using 32kB page size will result in higher performance kernel at
+ the price of higher memory consumption. This option is available
+ only on cnMIPS cores. Note that you will need a suitable Linux
+ distribution to support this.
+
config PAGE_SIZE_64KB
bool "64kB"
depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
@@ -1958,10 +1966,6 @@ config SECCOMP
endmenu
-config RWSEM_GENERIC_SPINLOCK
- bool
- default y
-
config LOCKDEP_SUPPORT
bool
default y
diff --git a/arch/mips/Makefile b/arch/mips/Makefile
index 8d544c7c9fe..c4cae9e6b80 100644
--- a/arch/mips/Makefile
+++ b/arch/mips/Makefile
@@ -14,8 +14,6 @@
KBUILD_DEFCONFIG := ip22_defconfig
-cflags-y := -ffunction-sections
-
#
# Select the object file format to substitute into the linker script.
#
@@ -50,6 +48,9 @@ ifneq ($(SUBARCH),$(ARCH))
endif
endif
+cflags-y := -ffunction-sections
+cflags-y += $(call cc-option, -mno-check-zero-division)
+
ifdef CONFIG_32BIT
ld-emul = $(32bit-emul)
vmlinux-32 = vmlinux
@@ -472,12 +473,12 @@ endif
# Simplified: what IP22 does at 128MB+ in ksegN, IP28 does at 512MB+ in xkphys
#
ifdef CONFIG_SGI_IP28
- ifeq ($(call cc-option-yn,-mr10k-cache-barrier=1), n)
- $(error gcc doesn't support needed option -mr10k-cache-barrier=1)
+ ifeq ($(call cc-option-yn,-mr10k-cache-barrier=store), n)
+ $(error gcc doesn't support needed option -mr10k-cache-barrier=store)
endif
endif
core-$(CONFIG_SGI_IP28) += arch/mips/sgi-ip22/
-cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=1 -I$(srctree)/arch/mips/include/asm/mach-ip28
+cflags-$(CONFIG_SGI_IP28) += -mr10k-cache-barrier=store -I$(srctree)/arch/mips/include/asm/mach-ip28
load-$(CONFIG_SGI_IP28) += 0xa800000020004000
#
diff --git a/arch/mips/alchemy/common/time.c b/arch/mips/alchemy/common/time.c
index f58d4ffb894..33fbae79af5 100644
--- a/arch/mips/alchemy/common/time.c
+++ b/arch/mips/alchemy/common/time.c
@@ -44,7 +44,7 @@
extern int allow_au1k_wait; /* default off for CP0 Counter */
-static cycle_t au1x_counter1_read(void)
+static cycle_t au1x_counter1_read(struct clocksource *cs)
{
return au_readl(SYS_RTCREAD);
}
diff --git a/arch/mips/cavium-octeon/csrc-octeon.c b/arch/mips/cavium-octeon/csrc-octeon.c
index 70fd92c3165..96110f217dc 100644
--- a/arch/mips/cavium-octeon/csrc-octeon.c
+++ b/arch/mips/cavium-octeon/csrc-octeon.c
@@ -38,7 +38,7 @@ void octeon_init_cvmcount(void)
local_irq_restore(flags);
}
-static cycle_t octeon_cvmcount_read(void)
+static cycle_t octeon_cvmcount_read(struct clocksource *cs)
{
return read_c0_cvmcount();
}
diff --git a/arch/mips/include/asm/bitops.h b/arch/mips/include/asm/bitops.h
index bac4a960b24..b1e9e97a9c7 100644
--- a/arch/mips/include/asm/bitops.h
+++ b/arch/mips/include/asm/bitops.h
@@ -567,7 +567,7 @@ static inline unsigned long __fls(unsigned long word)
int num;
if (BITS_PER_LONG == 32 &&
- __builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+ __builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
__asm__(
" .set push \n"
" .set mips32 \n"
@@ -644,7 +644,7 @@ static inline int fls(int x)
{
int r;
- if (__builtin_constant_p(cpu_has_mips_r) && cpu_has_mips_r) {
+ if (__builtin_constant_p(cpu_has_clo_clz) && cpu_has_clo_clz) {
__asm__("clz %0, %1" : "=r" (x) : "r" (x));
return 32 - x;
diff --git a/arch/mips/include/asm/checksum.h b/arch/mips/include/asm/checksum.h
index 290485ac540..f2f7c6c264d 100644
--- a/arch/mips/include/asm/checksum.h
+++ b/arch/mips/include/asm/checksum.h
@@ -40,7 +40,7 @@ static inline
__wsum csum_partial_copy_from_user(const void __user *src, void *dst, int len,
__wsum sum, int *err_ptr)
{
- might_sleep();
+ might_fault();
return __csum_partial_copy_user((__force void *)src, dst,
len, sum, err_ptr);
}
@@ -53,7 +53,7 @@ static inline
__wsum csum_and_copy_to_user(const void *src, void __user *dst, int len,
__wsum sum, int *err_ptr)
{
- might_sleep();
+ might_fault();
if (access_ok(VERIFY_WRITE, dst, len))
return __csum_partial_copy_user(src, (__force void *)dst,
len, sum, err_ptr);
diff --git a/arch/mips/include/asm/compat.h b/arch/mips/include/asm/compat.h
index 6c5b40905dd..f58aed354bf 100644
--- a/arch/mips/include/asm/compat.h
+++ b/arch/mips/include/asm/compat.h
@@ -3,7 +3,6 @@
/*
* Architecture specific compatibility types
*/
-#include <linux/seccomp.h>
#include <linux/thread_info.h>
#include <linux/types.h>
#include <asm/page.h>
diff --git a/arch/mips/include/asm/cpu-features.h b/arch/mips/include/asm/cpu-features.h
index a0d14f85b78..c0047f86133 100644
--- a/arch/mips/include/asm/cpu-features.h
+++ b/arch/mips/include/asm/cpu-features.h
@@ -147,6 +147,15 @@
#define cpu_has_mips_r (cpu_has_mips32r1 | cpu_has_mips32r2 | \
cpu_has_mips64r1 | cpu_has_mips64r2)
+/*
+ * MIPS32, MIPS64, VR5500, IDT32332, IDT32334 and maybe a few other
+ * pre-MIPS32/MIPS53 processors have CLO, CLZ. For 64-bit kernels
+ * cpu_has_clo_clz also indicates the availability of DCLO and DCLZ.
+ */
+# ifndef cpu_has_clo_clz
+# define cpu_has_clo_clz cpu_has_mips_r
+# endif
+
#ifndef cpu_has_dsp
#define cpu_has_dsp (cpu_data[0].ases & MIPS_ASE_DSP)
#endif
diff --git a/arch/mips/include/asm/div64.h b/arch/mips/include/asm/div64.h
index d1d699105c1..dc5ea573644 100644
--- a/arch/mips/include/asm/div64.h
+++ b/arch/mips/include/asm/div64.h
@@ -6,105 +6,63 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*/
-#ifndef _ASM_DIV64_H
-#define _ASM_DIV64_H
+#ifndef __ASM_DIV64_H
+#define __ASM_DIV64_H
-#include <linux/types.h>
+#include <asm-generic/div64.h>
-#if (_MIPS_SZLONG == 32)
+#if BITS_PER_LONG == 64
-#include <asm/compiler.h>
+#include <linux/types.h>
/*
* No traps on overflows for any of these...
*/
-#define do_div64_32(res, high, low, base) ({ \
- unsigned long __quot32, __mod32; \
- unsigned long __cf, __tmp, __tmp2, __i; \
- \
- __asm__(".set push\n\t" \
- ".set noat\n\t" \
- ".set noreorder\n\t" \
- "move %2, $0\n\t" \
- "move %3, $0\n\t" \
- "b 1f\n\t" \
- " li %4, 0x21\n" \
- "0:\n\t" \
- "sll $1, %0, 0x1\n\t" \
- "srl %3, %0, 0x1f\n\t" \
- "or %0, $1, %5\n\t" \
- "sll %1, %1, 0x1\n\t" \
- "sll %2, %2, 0x1\n" \
- "1:\n\t" \
- "bnez %3, 2f\n\t" \
- " sltu %5, %0, %z6\n\t" \
- "bnez %5, 3f\n" \
- "2:\n\t" \
- " addiu %4, %4, -1\n\t" \
- "subu %0, %0, %z6\n\t" \
- "addiu %2, %2, 1\n" \
- "3:\n\t" \
- "bnez %4, 0b\n\t" \
- " srl %5, %1, 0x1f\n\t" \
- ".set pop" \
- : "=&r" (__mod32), "=&r" (__tmp), \
- "=&r" (__quot32), "=&r" (__cf), \
- "=&r" (__i), "=&r" (__tmp2) \
- : "Jr" (base), "0" (high), "1" (low)); \
- \
- (res) = __quot32; \
- __mod32; })
-
-#define do_div(n, base) ({ \
- unsigned long long __quot; \
- unsigned long __mod; \
- unsigned long long __div; \
- unsigned long __upper, __low, __high, __base; \
- \
- __div = (n); \
- __base = (base); \
- \
- __high = __div >> 32; \
- __low = __div; \
- __upper = __high; \
- \
- if (__high) \
- __asm__("divu $0, %z2, %z3" \
- : "=h" (__upper), "=l" (__high) \
- : "Jr" (__high), "Jr" (__base) \
- : GCC_REG_ACCUM); \
- \
- __mod = do_div64_32(__low, __upper, __low, __base); \
- \
- __quot = __high; \
- __quot = __quot << 32 | __low; \
- (n) = __quot; \
- __mod; })
-
-#endif /* (_MIPS_SZLONG == 32) */
-
-#if (_MIPS_SZLONG == 64)
-
-/*
- * Hey, we're already 64-bit, no
- * need to play games..
- */
-#define do_div(n, base) ({ \
- unsigned long __quot; \
- unsigned int __mod; \
- unsigned long __div; \
- unsigned int __base; \
- \
- __div = (n); \
- __base = (base); \
- \
- __mod = __div % __base; \
- __quot = __div / __base; \
- \
- (n) = __quot; \
- __mod; })
+#define __div64_32(n, base) \
+({ \
+ unsigned long __cf, __tmp, __tmp2, __i; \
+ unsigned long __quot32, __mod32; \
+ unsigned long __high, __low; \
+ unsigned long long __n; \
+ \
+ __high = *__n >> 32; \
+ __low = __n; \
+ __asm__( \
+ " .set push \n" \
+ " .set noat \n" \
+ " .set noreorder \n" \
+ " move %2, $0 \n" \
+ " move %3, $0 \n" \
+ " b 1f \n" \
+ " li %4, 0x21 \n" \
+ "0: \n" \
+ " sll $1, %0, 0x1 \n" \
+ " srl %3, %0, 0x1f \n" \
+ " or %0, $1, %5 \n" \
+ " sll %1, %1, 0x1 \n" \
+ " sll %2, %2, 0x1 \n" \
+ "1: \n" \
+ " bnez %3, 2f \n" \
+ " sltu %5, %0, %z6 \n" \
+ " bnez %5, 3f \n" \
+ "2: \n" \
+ " addiu %4, %4, -1 \n" \
+ " subu %0, %0, %z6 \n" \
+ " addiu %2, %2, 1 \n" \
+ "3: \n" \
+ " bnez %4, 0b\n\t" \
+ " srl %5, %1, 0x1f\n\t" \
+ " .set pop" \
+ : "=&r" (__mod32), "=&r" (__tmp), \
+ "=&r" (__quot32), "=&r" (__cf), \
+ "=&r" (__i), "=&r" (__tmp2) \
+ : "Jr" (base), "0" (__high), "1" (__low)); \
+ \
+ (__n) = __quot32; \
+ __mod32; \
+})
-#endif /* (_MIPS_SZLONG == 64) */
+#endif /* BITS_PER_LONG == 64 */
-#endif /* _ASM_DIV64_H */
+#endif /* __ASM_DIV64_H */
diff --git a/arch/mips/include/asm/dma-mapping.h b/arch/mips/include/asm/dma-mapping.h
index c64afb40cd0..d16afddb09a 100644
--- a/arch/mips/include/asm/dma-mapping.h
+++ b/arch/mips/include/asm/dma-mapping.h
@@ -24,8 +24,13 @@ extern int dma_map_sg(struct device *dev, struct scatterlist *sg, int nents,
enum dma_data_direction direction);
extern dma_addr_t dma_map_page(struct device *dev, struct page *page,
unsigned long offset, size_t size, enum dma_data_direction direction);
-extern void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
- size_t size, enum dma_data_direction direction);
+
+static inline void dma_unmap_page(struct device *dev, dma_addr_t dma_address,
+ size_t size, enum dma_data_direction direction)
+{
+ dma_unmap_single(dev, dma_address, size, direction);
+}
+
extern void dma_unmap_sg(struct device *dev, struct scatterlist *sg,
int nhwentries, enum dma_data_direction direction);
extern void dma_sync_single_for_cpu(struct device *dev, dma_addr_t dma_handle,
diff --git a/arch/mips/include/asm/fixmap.h b/arch/mips/include/asm/fixmap.h
index 9cc8522a394..0f5caa1307f 100644
--- a/arch/mips/include/asm/fixmap.h
+++ b/arch/mips/include/asm/fixmap.h
@@ -108,6 +108,9 @@ static inline unsigned long virt_to_fix(const unsigned long vaddr)
return __virt_to_fix(vaddr);
}
+#define kmap_get_fixmap_pte(vaddr) \
+ pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
+
/*
* Called from pgtable_init()
*/
diff --git a/arch/mips/include/asm/hazards.h b/arch/mips/include/asm/hazards.h
index a12d971db4f..0eaf77ffbc4 100644
--- a/arch/mips/include/asm/hazards.h
+++ b/arch/mips/include/asm/hazards.h
@@ -138,8 +138,9 @@ do { \
__instruction_hazard(); \
} while (0)
-#elif defined(CONFIG_CPU_R10000) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
- defined(CONFIG_CPU_R5500) || defined(CONFIG_MACH_ALCHEMY)
+#elif defined(CONFIG_MACH_ALCHEMY) || defined(CONFIG_CPU_CAVIUM_OCTEON) || \
+ defined(CONFIG_CPU_LOONGSON2) || defined(CONFIG_CPU_R10000) || \
+ defined(CONFIG_CPU_R5500)
/*
* R10000 rocks - all hazards handled in hardware, so this becomes a nobrainer.
diff --git a/arch/mips/include/asm/highmem.h b/arch/mips/include/asm/highmem.h
index 4374ab2adc7..25adfb02923 100644
--- a/arch/mips/include/asm/highmem.h
+++ b/arch/mips/include/asm/highmem.h
@@ -30,8 +30,6 @@
/* declarations for highmem.c */
extern unsigned long highstart_pfn, highend_pfn;
-extern pte_t *kmap_pte;
-extern pgprot_t kmap_prot;
extern pte_t *pkmap_page_table;
/*
@@ -62,6 +60,10 @@ extern struct page *__kmap_atomic_to_page(void *ptr);
#define flush_cache_kmaps() flush_cache_all()
+extern void kmap_init(void);
+
+#define kmap_prot PAGE_KERNEL
+
#endif /* __KERNEL__ */
#endif /* _ASM_HIGHMEM_H */
diff --git a/arch/mips/include/asm/mach-au1x00/au1000.h b/arch/mips/include/asm/mach-au1x00/au1000.h
index 62f91f50b5b..854e95f1b07 100644
--- a/arch/mips/include/asm/mach-au1x00/au1000.h
+++ b/arch/mips/include/asm/mach-au1x00/au1000.h
@@ -715,7 +715,7 @@ enum soc_au1500_ints {
#ifdef CONFIG_SOC_AU1100
enum soc_au1100_ints {
AU1100_FIRST_INT = MIPS_CPU_IRQ_BASE + 8,
- AU1100_UART0_INT,
+ AU1100_UART0_INT = AU1100_FIRST_INT,
AU1100_UART1_INT,
AU1100_SD_INT,
AU1100_UART3_INT,
@@ -902,8 +902,8 @@ enum soc_au1200_ints {
AU1000_RTC_MATCH0_INT,
AU1000_RTC_MATCH1_INT,
AU1000_RTC_MATCH2_INT,
-
- AU1200_NAND_INT = AU1200_FIRST_INT + 23,
+ AU1200_GPIO_203,
+ AU1200_NAND_INT,
AU1200_GPIO_204,
AU1200_GPIO_205,
AU1200_GPIO_206,
diff --git a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
index 60638b8969b..5656c72de6d 100644
--- a/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
+++ b/arch/mips/include/asm/mach-au1x00/au1xxx_ide.h
@@ -46,20 +46,6 @@
#define CONFIG_BLK_DEV_IDE_AU1XXX_BURSTABLE_ON 0
#endif
-#ifdef CONFIG_PM
-/*
- * This will enable the device to be powered up when write() or read()
- * is called. If this is not defined, the driver will return -EBUSY.
- */
-#define WAKE_ON_ACCESS 1
-
-typedef struct {
- spinlock_t lock; /* Used to block on state transitions */
- au1xxx_power_dev_t *dev; /* Power Managers device structure */
- unsigned stopped; /* Used to signal device is stopped */
-} pm_state;
-#endif
-
typedef struct {
u32 tx_dev_id, rx_dev_id, target_dev_id;
u32 tx_chan, rx_chan;
@@ -72,9 +58,6 @@ typedef struct {
#endif
int irq;
u32 regbase;
-#ifdef CONFIG_PM
- pm_state pm;
-#endif
} _auide_hwif;
/******************************************************************************/
diff --git a/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h b/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h
new file mode 100644
index 00000000000..550a10dc9db
--- /dev/null
+++ b/arch/mips/include/asm/mach-lemote/cpu-feature-overrides.h
@@ -0,0 +1,59 @@
+/*
+ * This file is subject to the terms and conditions of the GNU General Public
+ * License. See the file "COPYING" in the main directory of this archive
+ * for more details.
+ *
+ * Copyright (C) 2009 Wu Zhangjin <wuzj@lemote.com>
+ * Copyright (C) 2009 Philippe Vachon <philippe@cowpig.ca>
+ * Copyright (C) 2009 Zhang Le <r0bertz@gentoo.org>
+ *
+ * reference: /proc/cpuinfo,
+ * arch/mips/kernel/cpu-probe.c(cpu_probe_legacy),
+ * arch/mips/kernel/proc.c(show_cpuinfo),
+ * loongson2f user manual.
+ */
+
+#ifndef __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
+#define __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H
+
+#define cpu_dcache_line_size() 32
+#define cpu_icache_line_size() 32
+#define cpu_scache_line_size() 32
+
+
+#define cpu_has_32fpr 1
+#define cpu_has_3k_cache 0
+#define cpu_has_4k_cache 1
+#define cpu_has_4kex 1
+#define cpu_has_64bits 1
+#define cpu_has_cache_cdex_p 0
+#define cpu_has_cache_cdex_s 0
+#define cpu_has_counter 1
+#define cpu_has_dc_aliases 1
+#define cpu_has_divec 0
+#define cpu_has_dsp 0
+#define cpu_has_ejtag 0
+#define cpu_has_fpu 1
+#define cpu_has_ic_fills_f_dc 0
+#define cpu_has_inclusive_pcaches 1
+#define cpu_has_llsc 1
+#define cpu_has_mcheck 0
+#define cpu_has_mdmx 0
+#define cpu_has_mips16 0
+#define cpu_has_mips32r1 0
+#define cpu_has_mips32r2 0
+#define cpu_has_mips3d 0
+#define cpu_has_mips64r1 0
+#define cpu_has_mips64r2 0
+#define cpu_has_mipsmt 0
+#define cpu_has_prefetch 0
+#define cpu_has_smartmips 0
+#define cpu_has_tlb 1
+#define cpu_has_tx39_cache 0
+#define cpu_has_userlocal 0
+#define cpu_has_vce 0
+#define cpu_has_vtag_icache 0
+#define cpu_has_watch 1
+#define cpu_icache_snoops_remote_store 1
+
+#endif /* __ASM_MACH_LEMOTE_CPU_FEATURE_OVERRIDES_H */
diff --git a/arch/mips/include/asm/mipsregs.h b/arch/mips/include/asm/mipsregs.h
index 526f327475c..32ef8bec5c8 100644
--- a/arch/mips/include/asm/mipsregs.h
+++ b/arch/mips/include/asm/mipsregs.h
@@ -184,12 +184,19 @@
#else
#define PM_4K 0x00000000
+#define PM_8K 0x00002000
#define PM_16K 0x00006000
+#define PM_32K 0x0000e000
#define PM_64K 0x0001e000
+#define PM_128K 0x0003e000
#define PM_256K 0x0007e000
+#define PM_512K 0x000fe000
#define PM_1M 0x001fe000
+#define PM_2M 0x003fe000
#define PM_4M 0x007fe000
+#define PM_8M 0x00ffe000
#define PM_16M 0x01ffe000
+#define PM_32M 0x03ffe000
#define PM_64M 0x07ffe000
#define PM_256M 0x1fffe000
#define PM_1G 0x7fffe000
@@ -201,8 +208,12 @@
*/
#ifdef CONFIG_PAGE_SIZE_4KB
#define PM_DEFAULT_MASK PM_4K
+#elif defined(CONFIG_PAGE_SIZE_8KB)
+#define PM_DEFAULT_MASK PM_8K
#elif defined(CONFIG_PAGE_SIZE_16KB)
#define PM_DEFAULT_MASK PM_16K
+#elif defined(CONFIG_PAGE_SIZE_32KB)
+#define PM_DEFAULT_MASK PM_32K
#elif defined(CONFIG_PAGE_SIZE_64KB)
#define PM_DEFAULT_MASK PM_64K
#else
@@ -717,8 +728,8 @@ do { \
".set\tmips64\n\t" \
"dmfc0\t%M0, " #source "\n\t" \
"dsll\t%L0, %M0, 32\n\t" \
- "dsrl\t%M0, %M0, 32\n\t" \
- "dsrl\t%L0, %L0, 32\n\t" \
+ "dsra\t%M0, %M0, 32\n\t" \
+ "dsra\t%L0, %L0, 32\n\t" \
".set\tmips0" \
: "=r" (__val)); \
else \
@@ -726,8 +737,8 @@ do { \
".set\tmips64\n\t" \
"dmfc0\t%M0, " #source ", " #sel "\n\t" \
"dsll\t%L0, %M0, 32\n\t" \
- "dsrl\t%M0, %M0, 32\n\t" \
- "dsrl\t%L0, %L0, 32\n\t" \
+ "dsra\t%M0, %M0, 32\n\t" \
+ "dsra\t%L0, %L0, 32\n\t" \
".set\tmips0" \
: "=r" (__val)); \
local_irq_restore(__flags); \
@@ -1484,14 +1495,15 @@ static inline unsigned int \
set_c0_##name(unsigned int set) \
{ \
unsigned int res; \
+ unsigned int new; \
unsigned int omt; \
unsigned long flags; \
\
local_irq_save(flags); \
omt = __dmt(); \
res = read_c0_##name(); \
- res |= set; \
- write_c0_##name(res); \
+ new = res | set; \
+ write_c0_##name(new); \
__emt(omt); \
local_irq_restore(flags); \
\
@@ -1502,14 +1514,15 @@ static inline unsigned int \
clear_c0_##name(unsigned int clear) \
{ \
unsigned int res; \
+ unsigned int new; \
unsigned int omt; \
unsigned long flags; \
\
local_irq_save(flags); \
omt = __dmt(); \
res = read_c0_##name(); \
- res &= ~clear; \
- write_c0_##name(res); \
+ new = res & ~clear; \
+ write_c0_##name(new); \
__emt(omt); \
local_irq_restore(flags); \
\
@@ -1517,9 +1530,10 @@ clear_c0_##name(unsigned int clear) \
} \
\
static inline unsigned int \
-change_c0_##name(unsigned int change, unsigned int new) \
+change_c0_##name(unsigned int change, unsigned int newbits) \
{ \
unsigned int res; \
+ unsigned int new; \
unsigned int omt; \
unsigned long flags; \
\
@@ -1527,9 +1541,9 @@ change_c0_##name(unsigned int change, unsigned int new) \
\
omt = __dmt(); \
res = read_c0_##name(); \
- res &= ~change; \
- res |= (new & change); \
- write_c0_##name(res); \
+ new = res & ~change; \
+ new |= (newbits & change); \
+ write_c0_##name(new); \
__emt(omt); \
local_irq_restore(flags); \
\
diff --git a/arch/mips/include/asm/page.h b/arch/mips/include/asm/page.h
index fe7a88ea066..9f946e4ca05 100644
--- a/arch/mips/include/asm/page.h
+++ b/arch/mips/include/asm/page.h
@@ -23,6 +23,9 @@
#ifdef CONFIG_PAGE_SIZE_16KB
#define PAGE_SHIFT 14
#endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define PAGE_SHIFT 15
+#endif
#ifdef CONFIG_PAGE_SIZE_64KB
#define PAGE_SHIFT 16
#endif
diff --git a/arch/mips/include/asm/pgtable-64.h b/arch/mips/include/asm/pgtable-64.h
index 943515f0ef8..4ed9d1bba2b 100644
--- a/arch/mips/include/asm/pgtable-64.h
+++ b/arch/mips/include/asm/pgtable-64.h
@@ -83,6 +83,12 @@
#define PMD_ORDER 0
#define PTE_ORDER 0
#endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define PGD_ORDER 0
+#define PUD_ORDER aieeee_attempt_to_allocate_pud
+#define PMD_ORDER 0
+#define PTE_ORDER 0
+#endif
#ifdef CONFIG_PAGE_SIZE_64KB
#define PGD_ORDER 0
#define PUD_ORDER aieeee_attempt_to_allocate_pud
diff --git a/arch/mips/include/asm/sn/addrs.h b/arch/mips/include/asm/sn/addrs.h
index fec9bdd3491..3a56d90abfa 100644
--- a/arch/mips/include/asm/sn/addrs.h
+++ b/arch/mips/include/asm/sn/addrs.h
@@ -359,11 +359,11 @@
TO_NODE_UNCAC((nasid), LAUNCH_OFFSET(nasid, slice))
#define LAUNCH_SIZE(nasid) KLD_LAUNCH(nasid)->size
-#define NMI_OFFSET(nasid, slice) \
+#define SN_NMI_OFFSET(nasid, slice) \
(KLD_NMI(nasid)->offset + \
KLD_NMI(nasid)->stride * (slice))
#define NMI_ADDR(nasid, slice) \
- TO_NODE_UNCAC((nasid), NMI_OFFSET(nasid, slice))
+ TO_NODE_UNCAC((nasid), SN_NMI_OFFSET(nasid, slice))
#define NMI_SIZE(nasid) KLD_NMI(nasid)->size
#define KLCONFIG_OFFSET(nasid) KLD_KLCONFIG(nasid)->offset
diff --git a/arch/mips/include/asm/sn/nmi.h b/arch/mips/include/asm/sn/nmi.h
index 6b7b0b5f372..1af49897d4e 100644
--- a/arch/mips/include/asm/sn/nmi.h
+++ b/arch/mips/include/asm/sn/nmi.h
@@ -3,13 +3,13 @@
* License. See the file "COPYING" in the main directory of this archive
* for more details.
*
+ * Derived from IRIX <sys/SN/nmi.h>, Revision 1.5.
+ *
* Copyright (C) 1992 - 1997 Silicon Graphics, Inc.
*/
#ifndef __ASM_SN_NMI_H
#define __ASM_SN_NMI_H
-#ident "$Revision: 1.5 $"
-
#include <asm/sn/addrs.h>
/*
diff --git a/arch/mips/include/asm/thread_info.h b/arch/mips/include/asm/thread_info.h
index 676aa2ae191..143a48136a4 100644
--- a/arch/mips/include/asm/thread_info.h
+++ b/arch/mips/include/asm/thread_info.h
@@ -75,6 +75,9 @@ register struct thread_info *__current_thread_info __asm__("$28");
#ifdef CONFIG_PAGE_SIZE_16KB
#define THREAD_SIZE_ORDER (0)
#endif
+#ifdef CONFIG_PAGE_SIZE_32KB
+#define THREAD_SIZE_ORDER (0)
+#endif
#ifdef CONFIG_PAGE_SIZE_64KB
#define THREAD_SIZE_ORDER (0)
#endif
diff --git a/arch/mips/include/asm/time.h b/arch/mips/include/asm/time.h
index 38a30d2ee95..df6a430de5e 100644
--- a/arch/mips/include/asm/time.h
+++ b/arch/mips/include/asm/time.h
@@ -57,7 +57,11 @@ extern int r4k_clockevent_init(void);
static inline int mips_clockevent_init(void)
{
-#ifdef CONFIG_CEVT_R4K
+#ifdef CONFIG_MIPS_MT_SMTC
+ extern int smtc_clockevent_init(void);
+
+ return smtc_clockevent_init();
+#elif defined(CONFIG_CEVT_R4K)
return r4k_clockevent_init();
#else
return -ENXIO;
diff --git a/arch/mips/include/asm/uaccess.h b/arch/mips/include/asm/uaccess.h
index 09ff5bb1744..c2d53c18fd3 100644
--- a/arch/mips/include/asm/uaccess.h
+++ b/arch/mips/include/asm/uaccess.h
@@ -105,10 +105,20 @@
#define __access_mask get_fs().seg
#define __access_ok(addr, size, mask) \
- (((signed long)((mask) & ((addr) | ((addr) + (size)) | __ua_size(size)))) == 0)
+({ \
+ unsigned long __addr = (unsigned long) (addr); \
+ unsigned long __size = size; \
+ unsigned long __mask = mask; \
+ unsigned long __ok; \
+ \
+ __chk_user_ptr(addr); \
+ __ok = (signed long)(__mask & (__addr | (__addr + __size) | \
+ __ua_size(__size))); \
+ __ok == 0; \
+})
#define access_ok(type, addr, size) \
- likely(__access_ok((unsigned long)(addr), (size), __access_mask))
+ likely(__access_ok((addr), (size), __access_mask))
/*
* put_user: - Write a simple value into user space.
@@ -225,6 +235,7 @@ do { \
({ \
int __gu_err; \
\
+ __chk_user_ptr(ptr); \
__get_user_common((x), size, ptr); \
__gu_err; \
})
@@ -234,6 +245,7 @@ do { \
int __gu_err = -EFAULT; \
const __typeof__(*(ptr)) __user * __gu_ptr = (ptr); \
\
+ might_fault(); \
if (likely(access_ok(VERIFY_READ, __gu_ptr, size))) \
__get_user_common((x), size, __gu_ptr); \
\
@@ -305,6 +317,7 @@ do { \
__typeof__(*(ptr)) __pu_val; \
int __pu_err = 0; \
\
+ __chk_user_ptr(ptr); \
__pu_val = (x); \
switch (size) { \
case 1: __put_user_asm("sb", ptr); break; \
@@ -322,6 +335,7 @@ do { \
__typeof__(*(ptr)) __pu_val = (x); \
int __pu_err = -EFAULT; \
\
+ might_fault(); \
if (likely(access_ok(VERIFY_WRITE, __pu_addr, size))) { \
switch (size) { \
case 1: __put_user_asm("sb", __pu_addr); break; \
@@ -696,10 +710,10 @@ extern size_t __copy_user(void *__to, const void *__from, size_t __n);
const void *__cu_from; \
long __cu_len; \
\
- might_sleep(); \
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
+ might_fault(); \
__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, __cu_len); \
__cu_len; \
})
@@ -752,13 +766,14 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
const void *__cu_from; \
long __cu_len; \
\
- might_sleep(); \
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
- if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) \
+ if (access_ok(VERIFY_WRITE, __cu_to, __cu_len)) { \
+ might_fault(); \
__cu_len = __invoke_copy_to_user(__cu_to, __cu_from, \
__cu_len); \
+ } \
__cu_len; \
})
@@ -831,10 +846,10 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
const void __user *__cu_from; \
long __cu_len; \
\
- might_sleep(); \
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
+ might_fault(); \
__cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \
__cu_len); \
__cu_len; \
@@ -862,17 +877,31 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
const void __user *__cu_from; \
long __cu_len; \
\
- might_sleep(); \
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
- if (access_ok(VERIFY_READ, __cu_from, __cu_len)) \
+ if (access_ok(VERIFY_READ, __cu_from, __cu_len)) { \
+ might_fault(); \
__cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \
__cu_len); \
+ } \
__cu_len; \
})
-#define __copy_in_user(to, from, n) __copy_from_user(to, from, n)
+#define __copy_in_user(to, from, n) \
+({ \
+ void __user *__cu_to; \
+ const void __user *__cu_from; \
+ long __cu_len; \
+ \
+ __cu_to = (to); \
+ __cu_from = (from); \
+ __cu_len = (n); \
+ might_fault(); \
+ __cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \
+ __cu_len); \
+ __cu_len; \
+})
#define copy_in_user(to, from, n) \
({ \
@@ -880,14 +909,15 @@ extern size_t __copy_user_inatomic(void *__to, const void *__from, size_t __n);
const void __user *__cu_from; \
long __cu_len; \
\
- might_sleep(); \
__cu_to = (to); \
__cu_from = (from); \
__cu_len = (n); \
if (likely(access_ok(VERIFY_READ, __cu_from, __cu_len) && \
- access_ok(VERIFY_WRITE, __cu_to, __cu_len))) \
+ access_ok(VERIFY_WRITE, __cu_to, __cu_len))) { \
+ might_fault(); \
__cu_len = __invoke_copy_from_user(__cu_to, __cu_from, \
__cu_len); \
+ } \
__cu_len; \
})
@@ -907,7 +937,7 @@ __clear_user(void __user *addr, __kernel_size_t size)
{
__kernel_size_t res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
"move\t$5, $0\n\t"
@@ -926,7 +956,7 @@ __clear_user(void __user *addr, __kernel_size_t size)
void __user * __cl_addr = (addr); \
unsigned long __cl_size = (n); \
if (__cl_size && access_ok(VERIFY_WRITE, \
- ((unsigned long)(__cl_addr)), __cl_size)) \
+ __cl_addr, __cl_size)) \
__cl_size = __clear_user(__cl_addr, __cl_size); \
__cl_size; \
})
@@ -956,7 +986,7 @@ __strncpy_from_user(char *__to, const char __user *__from, long __len)
{
long res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
"move\t$5, %2\n\t"
@@ -993,7 +1023,7 @@ strncpy_from_user(char *__to, const char __user *__from, long __len)
{
long res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
"move\t$5, %2\n\t"
@@ -1012,7 +1042,7 @@ static inline long __strlen_user(const char __user *s)
{
long res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
__MODULE_JAL(__strlen_user_nocheck_asm)
@@ -1042,7 +1072,7 @@ static inline long strlen_user(const char __user *s)
{
long res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
__MODULE_JAL(__strlen_user_asm)
@@ -1059,7 +1089,7 @@ static inline long __strnlen_user(const char __user *s, long n)
{
long res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
"move\t$5, %2\n\t"
@@ -1090,7 +1120,7 @@ static inline long strnlen_user(const char __user *s, long n)
{
long res;
- might_sleep();
+ might_fault();
__asm__ __volatile__(
"move\t$4, %1\n\t"
"move\t$5, %2\n\t"
diff --git a/arch/mips/kernel/cevt-smtc.c b/arch/mips/kernel/cevt-smtc.c
index 6d45e24db5b..df6f5bc6057 100644
--- a/arch/mips/kernel/cevt-smtc.c
+++ b/arch/mips/kernel/cevt-smtc.c
@@ -245,7 +245,7 @@ irqreturn_t c0_compare_interrupt(int irq, void *dev_id)
}
-int __cpuinit mips_clockevent_init(void)
+int __cpuinit smtc_clockevent_init(void)
{
uint64_t mips_freq = mips_hpt_frequency;
unsigned int cpu = smp_processor_id();
diff --git a/arch/mips/kernel/scall64-n32.S b/arch/mips/kernel/scall64-n32.S
index c2c16ef9218..93cc672f452 100644
--- a/arch/mips/kernel/scall64-n32.S
+++ b/arch/mips/kernel/scall64-n32.S
@@ -405,8 +405,8 @@ EXPORT(sysn32_call_table)
PTR sys_eventfd
PTR sys_fallocate
PTR sys_timerfd_create
- PTR sys_timerfd_gettime /* 5285 */
- PTR sys_timerfd_settime
+ PTR compat_sys_timerfd_gettime /* 5285 */
+ PTR compat_sys_timerfd_settime
PTR sys_signalfd4
PTR sys_eventfd2
PTR sys_epoll_create1
diff --git a/arch/mips/kernel/scall64-o32.S b/arch/mips/kernel/scall64-o32.S
index 002fac27021..a5598b2339d 100644
--- a/arch/mips/kernel/scall64-o32.S
+++ b/arch/mips/kernel/scall64-o32.S
@@ -525,8 +525,8 @@ sys_call_table:
PTR sys_eventfd
PTR sys32_fallocate /* 4320 */
PTR sys_timerfd_create
- PTR sys_timerfd_gettime
- PTR sys_timerfd_settime
+ PTR compat_sys_timerfd_gettime
+ PTR compat_sys_timerfd_settime
PTR compat_sys_signalfd4
PTR sys_eventfd2 /* 4325 */
PTR sys_epoll_create1
diff --git a/arch/mips/kernel/unaligned.c b/arch/mips/kernel/unaligned.c
index bf4c4a979ab..67bd626942a 100644
--- a/arch/mips/kernel/unaligned.c
+++ b/arch/mips/kernel/unaligned.c
@@ -482,19 +482,19 @@ fault:
return;
die_if_kernel("Unhandled kernel unaligned access", regs);
- send_sig(SIGSEGV, current, 1);
+ force_sig(SIGSEGV, current);
return;
sigbus:
die_if_kernel("Unhandled kernel unaligned access", regs);
- send_sig(SIGBUS, current, 1);
+ force_sig(SIGBUS, current);
return;
sigill:
die_if_kernel("Unhandled kernel unaligned access or invalid instruction", regs);
- send_sig(SIGILL, current, 1);
+ force_sig(SIGILL, current);
}
asmlinkage void do_ade(struct pt_regs *regs)
diff --git a/arch/mips/lib/dump_tlb.c b/arch/mips/lib/dump_tlb.c
index 779821cd54a..3f69725556a 100644
--- a/arch/mips/lib/dump_tlb.c
+++ b/arch/mips/lib/dump_tlb.c
@@ -19,6 +19,15 @@ static inline const char *msk2str(unsigned int mask)
case PM_16K: return "16kb";
case PM_64K: return "64kb";
case PM_256K: return "256kb";
+#ifdef CONFIG_CPU_CAVIUM_OCTEON
+ case PM_8K: return "8kb";
+ case PM_32K: return "32kb";
+ case PM_128K: return "128kb";
+ case PM_512K: return "512kb";
+ case PM_2M: return "2Mb";
+ case PM_8M: return "8Mb";
+ case PM_32M: return "32Mb";
+#endif
#ifndef CONFIG_CPU_VR41XX
case PM_1M: return "1Mb";
case PM_4M: return "4Mb";
diff --git a/arch/mips/mm/c-r4k.c b/arch/mips/mm/c-r4k.c
index 58d9075e86f..171951d2305 100644
--- a/arch/mips/mm/c-r4k.c
+++ b/arch/mips/mm/c-r4k.c
@@ -1041,7 +1041,7 @@ static void __cpuinit probe_pcache(void)
printk("Primary instruction cache %ldkB, %s, %s, linesize %d bytes.\n",
icache_size >> 10,
- cpu_has_vtag_icache ? "VIVT" : "VIPT",
+ c->icache.flags & MIPS_CACHE_VTAG ? "VIVT" : "VIPT",
way_string[c->icache.ways], c->icache.linesz);
printk("Primary data cache %ldkB, %s, %s, %s, linesize %d bytes\n",
diff --git a/arch/mips/mm/dma-default.c b/arch/mips/mm/dma-default.c
index bed56f1ac83..4fdb7f5216b 100644
--- a/arch/mips/mm/dma-default.c
+++ b/arch/mips/mm/dma-default.c
@@ -209,7 +209,7 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page,
unsigned long addr;
addr = (unsigned long) page_address(page) + offset;
- dma_cache_wback_inv(addr, size);
+ __dma_sync(addr, size, direction);
}
return plat_map_dma_mem_page(dev, page) + offset;
@@ -217,23 +217,6 @@ dma_addr_t dma_map_page(struct device *dev, struct page *page,
EXPORT_SYMBOL(dma_map_page);
-void dma_unmap_page(struct device *dev, dma_addr_t dma_address, size_t size,
- enum dma_data_direction direction)
-{
- BUG_ON(direction == DMA_NONE);
-
- if (!plat_device_is_coherent(dev) && direction != DMA_TO_DEVICE) {
- unsigned long addr;
-
- addr = dma_addr_to_virt(dma_address);
- dma_cache_wback_inv(addr, size);
- }
-
- plat_unmap_dma_mem(dev, dma_address);
-}
-
-EXPORT_SYMBOL(dma_unmap_page);
-
void dma_unmap_sg(struct device *dev, struct scatterlist *sg, int nhwentries,
enum dma_data_direction direction)
{
diff --git a/arch/mips/mm/highmem.c b/arch/mips/mm/highmem.c
index 4481656d106..2b1309b2580 100644
--- a/arch/mips/mm/highmem.c
+++ b/arch/mips/mm/highmem.c
@@ -1,7 +1,12 @@
#include <linux/module.h>
#include <linux/highmem.h>
+#include <asm/fixmap.h>
#include <asm/tlbflush.h>
+static pte_t *kmap_pte;
+
+unsigned long highstart_pfn, highend_pfn;
+
void *__kmap(struct page *page)
{
void *addr;
@@ -14,6 +19,7 @@ void *__kmap(struct page *page)
return addr;
}
+EXPORT_SYMBOL(__kmap);
void __kunmap(struct page *page)
{
@@ -22,6 +28,7 @@ void __kunmap(struct page *page)
return;
kunmap_high(page);
}
+EXPORT_SYMBOL(__kunmap);
/*
* kmap_atomic/kunmap_atomic is significantly faster than kmap/kunmap because
@@ -48,11 +55,12 @@ void *__kmap_atomic(struct page *page, enum km_type type)
#ifdef CONFIG_DEBUG_HIGHMEM
BUG_ON(!pte_none(*(kmap_pte - idx)));
#endif
- set_pte(kmap_pte-idx, mk_pte(page, kmap_prot));
+ set_pte(kmap_pte-idx, mk_pte(page, PAGE_KERNEL));
local_flush_tlb_one((unsigned long)vaddr);
return (void*) vaddr;
}
+EXPORT_SYMBOL(__kmap_atomic);
void __kunmap_atomic(void *kvaddr, enum km_type type)
{
@@ -77,6 +85,7 @@ void __kunmap_atomic(void *kvaddr, enum km_type type)
pagefault_enable();
}
+EXPORT_SYMBOL(__kunmap_atomic);
/*
* This is the same as kmap_atomic() but can map memory that doesn't
@@ -92,7 +101,7 @@ void *kmap_atomic_pfn(unsigned long pfn, enum km_type type)
debug_kmap_atomic(type);
idx = type + KM_TYPE_NR*smp_processor_id();
vaddr = __fix_to_virt(FIX_KMAP_BEGIN + idx);
- set_pte(kmap_pte-idx, pfn_pte(pfn, kmap_prot));
+ set_pte(kmap_pte-idx, pfn_pte(pfn, PAGE_KERNEL));
flush_tlb_one(vaddr);
return (void*) vaddr;
@@ -111,7 +120,11 @@ struct page *__kmap_atomic_to_page(void *ptr)
return pte_page(*pte);
}
-EXPORT_SYMBOL(__kmap);
-EXPORT_SYMBOL(__kunmap);
-EXPORT_SYMBOL(__kmap_atomic);
-EXPORT_SYMBOL(__kunmap_atomic);
+void __init kmap_init(void)
+{
+ unsigned long kmap_vstart;
+
+ /* cache the first kmap pte */
+ kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
+ kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
+}
diff --git a/arch/mips/mm/init.c b/arch/mips/mm/init.c
index d9348946a19..c5511294a9e 100644
--- a/arch/mips/mm/init.c
+++ b/arch/mips/mm/init.c
@@ -104,14 +104,6 @@ unsigned long setup_zero_pages(void)
return 1UL << order;
}
-/*
- * These are almost like kmap_atomic / kunmap_atmic except they take an
- * additional address argument as the hint.
- */
-
-#define kmap_get_fixmap_pte(vaddr) \
- pte_offset_kernel(pmd_offset(pud_offset(pgd_offset_k(vaddr), (vaddr)), (vaddr)), (vaddr))
-
#ifdef CONFIG_MIPS_MT_SMTC
static pte_t *kmap_coherent_pte;
static void __init kmap_coherent_init(void)
@@ -264,24 +256,6 @@ void copy_from_user_page(struct vm_area_struct *vma,
}
}
-#ifdef CONFIG_HIGHMEM
-unsigned long highstart_pfn, highend_pfn;
-
-pte_t *kmap_pte;
-pgprot_t kmap_prot;
-
-static void __init kmap_init(void)
-{
- unsigned long kmap_vstart;
-
- /* cache the first kmap pte */
- kmap_vstart = __fix_to_virt(FIX_KMAP_BEGIN);
- kmap_pte = kmap_get_fixmap_pte(kmap_vstart);
-
- kmap_prot = PAGE_KERNEL;
-}
-#endif /* CONFIG_HIGHMEM */
-
void __init fixrange_init(unsigned long start, unsigned long end,
pgd_t *pgd_base)
{
diff --git a/arch/mips/mm/sc-rm7k.c b/arch/mips/mm/sc-rm7k.c
index e3abfb2d7e8..de69bfbf506 100644
--- a/arch/mips/mm/sc-rm7k.c
+++ b/arch/mips/mm/sc-rm7k.c
@@ -29,7 +29,7 @@ extern unsigned long icache_way_size, dcache_way_size;
#include <asm/r4kcache.h>
-int rm7k_tcache_enabled;
+static int rm7k_tcache_enabled;
/*
* Writeback and invalidate the primary cache dcache before DMA.
@@ -121,7 +121,7 @@ static void rm7k_sc_disable(void)
clear_c0_config(RM7K_CONF_SE);
}
-struct bcache_ops rm7k_sc_ops = {
+static struct bcache_ops rm7k_sc_ops = {
.bc_enable = rm7k_sc_enable,
.bc_disable = rm7k_sc_disable,
.bc_wback_inv = rm7k_sc_wback_inv,
diff --git a/arch/mips/mm/tlb-r3k.c b/arch/mips/mm/tlb-r3k.c
index f0cf46adb97..1c0048a6f5c 100644
--- a/arch/mips/mm/tlb-r3k.c
+++ b/arch/mips/mm/tlb-r3k.c
@@ -82,8 +82,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
int cpu = smp_processor_id();
if (cpu_context(cpu, mm) != 0) {
- unsigned long flags;
- int size;
+ unsigned long size, flags;
#ifdef DEBUG_TLB
printk("[tlbrange<%lu,0x%08lx,0x%08lx>]",
@@ -121,8 +120,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
- unsigned long flags;
- int size;
+ unsigned long size, flags;
#ifdef DEBUG_TLB
printk("[tlbrange<%lu,0x%08lx,0x%08lx>]", start, end);
diff --git a/arch/mips/mm/tlb-r4k.c b/arch/mips/mm/tlb-r4k.c
index 9619f66e531..892be426787 100644
--- a/arch/mips/mm/tlb-r4k.c
+++ b/arch/mips/mm/tlb-r4k.c
@@ -117,8 +117,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
int cpu = smp_processor_id();
if (cpu_context(cpu, mm) != 0) {
- unsigned long flags;
- int size;
+ unsigned long size, flags;
ENTER_CRITICAL(flags);
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
@@ -160,8 +159,7 @@ void local_flush_tlb_range(struct vm_area_struct *vma, unsigned long start,
void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
- unsigned long flags;
- int size;
+ unsigned long size, flags;
ENTER_CRITICAL(flags);
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
diff --git a/arch/mips/mm/tlb-r8k.c b/arch/mips/mm/tlb-r8k.c
index 4f01a3be215..4ec95cc2df2 100644
--- a/arch/mips/mm/tlb-r8k.c
+++ b/arch/mips/mm/tlb-r8k.c
@@ -111,8 +111,7 @@ out_restore:
/* Usable for KV1 addresses only! */
void local_flush_tlb_kernel_range(unsigned long start, unsigned long end)
{
- unsigned long flags;
- int size;
+ unsigned long size, flags;
size = (end - start + (PAGE_SIZE - 1)) >> PAGE_SHIFT;
size = (size + 1) >> 1;
diff --git a/arch/mips/pmc-sierra/Kconfig b/arch/mips/pmc-sierra/Kconfig
index 90261b83db0..c139988bb85 100644
--- a/arch/mips/pmc-sierra/Kconfig
+++ b/arch/mips/pmc-sierra/Kconfig
@@ -36,18 +36,6 @@ config PMC_MSP7120_FPGA
endchoice
-menu "Options for PMC-Sierra MSP chipsets"
- depends on PMC_MSP
-
-config PMC_MSP_EMBEDDED_ROOTFS
- bool "Root filesystem embedded in kernel image"
- select MTD
- select MTD_BLOCK
- select MTD_PMC_MSP_RAMROOT
- select MTD_RAM
-
-endmenu
-
config HYPERTRANSPORT
bool "Hypertransport Support for PMC-Sierra Yosemite"
depends on PMC_YOSEMITE
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_prom.c b/arch/mips/pmc-sierra/msp71xx/msp_prom.c
index e5bd5481d8d..c317a3623ce 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_prom.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_prom.c
@@ -40,12 +40,6 @@
#include <linux/string.h>
#include <linux/interrupt.h>
#include <linux/mm.h>
-#ifdef CONFIG_CRAMFS
-#include <linux/cramfs_fs.h>
-#endif
-#ifdef CONFIG_SQUASHFS
-#include <linux/squashfs_fs.h>
-#endif
#include <asm/addrspace.h>
#include <asm/bootinfo.h>
@@ -435,10 +429,6 @@ struct prom_pmemblock *__init prom_getmdesc(void)
char *str;
unsigned int memsize;
unsigned int heaptop;
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
- void *ramroot_start;
- unsigned long ramroot_size;
-#endif
int i;
str = prom_getenv(memsz_env);
@@ -506,19 +496,7 @@ struct prom_pmemblock *__init prom_getmdesc(void)
i++; /* 3 */
mdesc[i].type = BOOT_MEM_RESERVED;
mdesc[i].base = CPHYSADDR((u32)_text);
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
- if (get_ramroot(&ramroot_start, &ramroot_size)) {
- /*
- * Rootfs in RAM -- follows kernel
- * Combine rootfs image with kernel block so a
- * page (4k) isn't wasted between memory blocks
- */
- mdesc[i].size = CPHYSADDR(PAGE_ALIGN(
- (u32)ramroot_start + ramroot_size)) - mdesc[i].base;
- } else
-#endif
- mdesc[i].size = CPHYSADDR(PAGE_ALIGN(
- (u32)_end)) - mdesc[i].base;
+ mdesc[i].size = CPHYSADDR(PAGE_ALIGN((u32)_end)) - mdesc[i].base;
/* Remainder of RAM -- under memsize */
i++; /* 5 */
@@ -528,39 +506,3 @@ struct prom_pmemblock *__init prom_getmdesc(void)
return &mdesc[0];
}
-
-/* rootfs functions */
-#ifdef CONFIG_MTD_PMC_MSP_RAMROOT
-bool get_ramroot(void **start, unsigned long *size)
-{
- extern char _end[];
-
- /* Check for start following the end of the kernel */
- void *check_start = (void *)_end;
-
- /* Check for supported rootfs types */
-#ifdef CONFIG_CRAMFS
- if (*(__u32 *)check_start == CRAMFS_MAGIC) {
- /* Get CRAMFS size */
- *start = check_start;
- *size = PAGE_ALIGN(((struct cramfs_super *)
- check_start)->size);
-
- return true;
- }
-#endif
-#ifdef CONFIG_SQUASHFS
- if (*((unsigned int *)check_start) == SQUASHFS_MAGIC) {
- /* Get SQUASHFS size */
- *start = check_start;
- *size = PAGE_ALIGN(((struct squashfs_super_block *)
- check_start)->bytes_used);
-
- return true;
- }
-#endif
-
- return false;
-}
-EXPORT_SYMBOL(get_ramroot);
-#endif
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_setup.c b/arch/mips/pmc-sierra/msp71xx/msp_setup.c
index c93675615f5..a54e85b3cf2 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_setup.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_setup.c
@@ -21,7 +21,6 @@
#if defined(CONFIG_PMC_MSP7120_GW)
#include <msp_regops.h>
-#include <msp_gpio.h>
#define MSP_BOARD_RESET_GPIO 9
#endif
@@ -88,11 +87,8 @@ void msp7120_reset(void)
* as GPIO char driver may not be enabled and it would look up
* data inRAM!
*/
- set_value_reg32(GPIO_CFG3_REG,
- basic_mode_mask(MSP_BOARD_RESET_GPIO),
- basic_mode(MSP_GPIO_OUTPUT, MSP_BOARD_RESET_GPIO));
- set_reg32(GPIO_DATA3_REG,
- basic_data_mask(MSP_BOARD_RESET_GPIO));
+ set_value_reg32(GPIO_CFG3_REG, 0xf000, 0x8000);
+ set_reg32(GPIO_DATA3_REG, 8);
/*
* In case GPIO9 doesn't reset the board (jumper configurable!)
diff --git a/arch/mips/pmc-sierra/msp71xx/msp_time.c b/arch/mips/pmc-sierra/msp71xx/msp_time.c
index 7cfeda5a651..cca64e15f57 100644
--- a/arch/mips/pmc-sierra/msp71xx/msp_time.c
+++ b/arch/mips/pmc-sierra/msp71xx/msp_time.c
@@ -81,10 +81,7 @@ void __init plat_time_init(void)
mips_hpt_frequency = cpu_rate/2;
}
-void __init plat_timer_setup(struct irqaction *irq)
+unsigned int __init get_c0_compare_int(void)
{
-#ifdef CONFIG_IRQ_MSP_CIC
- /* we are using the vpe0 counter for timer interrupts */
- setup_irq(MSP_INT_VPE0_TIMER, irq);
-#endif
+ return MSP_INT_VPE0_TIMER;
}
diff --git a/arch/mips/sgi-ip22/ip22-reset.c b/arch/mips/sgi-ip22/ip22-reset.c
index 4ad5c3393fd..45b6694c207 100644
--- a/arch/mips/sgi-ip22/ip22-reset.c
+++ b/arch/mips/sgi-ip22/ip22-reset.c
@@ -148,7 +148,7 @@ static irqreturn_t panel_int(int irq, void *dev_id)
if (sgint->istat1 & SGINT_ISTAT1_PWR) {
/* Wait until interrupt goes away */
- disable_irq(SGI_PANEL_IRQ);
+ disable_irq_nosync(SGI_PANEL_IRQ);
init_timer(&debounce_timer);
debounce_timer.function = debounce;
debounce_timer.expires = jiffies + 5;
diff --git a/arch/mips/sgi-ip32/ip32-berr.c b/arch/mips/sgi-ip32/ip32-berr.c
index a278e918a01..afc1cadbba3 100644
--- a/arch/mips/sgi-ip32/ip32-berr.c
+++ b/arch/mips/sgi-ip32/ip32-berr.c
@@ -16,7 +16,7 @@
#include <asm/ptrace.h>
#include <asm/tlbdebug.h>
-int ip32_be_handler(struct pt_regs *regs, int is_fixup)
+static int ip32_be_handler(struct pt_regs *regs, int is_fixup)
{
int data = regs->cp0_cause & 4;
diff --git a/arch/mips/sgi-ip32/ip32-irq.c b/arch/mips/sgi-ip32/ip32-irq.c
index 83a0b3c359d..5c2bf111ca6 100644
--- a/arch/mips/sgi-ip32/ip32-irq.c
+++ b/arch/mips/sgi-ip32/ip32-irq.c
@@ -112,13 +112,13 @@ static void inline flush_mace_bus(void)
extern irqreturn_t crime_memerr_intr(int irq, void *dev_id);
extern irqreturn_t crime_cpuerr_intr(int irq, void *dev_id);
-struct irqaction memerr_irq = {
+static struct irqaction memerr_irq = {
.handler = crime_memerr_intr,
.flags = IRQF_DISABLED,
.name = "CRIME memory error",
};
-struct irqaction cpuerr_irq = {
+static struct irqaction cpuerr_irq = {
.handler = crime_cpuerr_intr,
.flags = IRQF_DISABLED,
.name = "CRIME CPU error",
diff --git a/arch/mips/sgi-ip32/ip32-reset.c b/arch/mips/sgi-ip32/ip32-reset.c
index b6cab089561..9b95d80ebc6 100644
--- a/arch/mips/sgi-ip32/ip32-reset.c
+++ b/arch/mips/sgi-ip32/ip32-reset.c
@@ -53,7 +53,7 @@ static inline void ip32_machine_halt(void)
static void ip32_machine_power_off(void)
{
- volatile unsigned char reg_a, xctrl_a, xctrl_b;
+ unsigned char reg_a, xctrl_a, xctrl_b;
disable_irq(MACEISA_RTC_IRQ);
reg_a = CMOS_READ(RTC_REG_A);
@@ -91,9 +91,10 @@ static void blink_timeout(unsigned long data)
static void debounce(unsigned long data)
{
- volatile unsigned char reg_a, reg_c, xctrl_a;
+ unsigned char reg_a, reg_c, xctrl_a;
reg_c = CMOS_READ(RTC_INTR_FLAGS);
+ reg_a = CMOS_READ(RTC_REG_A);
CMOS_WRITE(reg_a | DS_REGA_DV0, RTC_REG_A);
wbflush();
xctrl_a = CMOS_READ(DS_B1_XCTRL4A);
@@ -137,7 +138,7 @@ static inline void ip32_power_button(void)
static irqreturn_t ip32_rtc_int(int irq, void *dev_id)
{
- volatile unsigned char reg_c;
+ unsigned char reg_c;
reg_c = CMOS_READ(RTC_INTR_FLAGS);
if (!(reg_c & RTC_IRQF)) {
@@ -145,7 +146,7 @@ static irqreturn_t ip32_rtc_int(int irq, void *dev_id)
"%s: RTC IRQ without RTC_IRQF\n", __func__);
}
/* Wait until interrupt goes away */
- disable_irq(MACEISA_RTC_IRQ);
+ disable_irq_nosync(MACEISA_RTC_IRQ);
init_timer(&debounce_timer);
debounce_timer.function = debounce;
debounce_timer.expires = jiffies + 50;
diff --git a/arch/mips/sibyte/bcm1480/irq.c b/arch/mips/sibyte/bcm1480/irq.c
index 352352b3cb2..c147c4b35d3 100644
--- a/arch/mips/sibyte/bcm1480/irq.c
+++ b/arch/mips/sibyte/bcm1480/irq.c
@@ -113,7 +113,6 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
{
int i = 0, old_cpu, cpu, int_on, k;
u64 cur_ints;
- struct irq_desc *desc = irq_desc + irq;
unsigned long flags;
unsigned int irq_dirty;
@@ -127,8 +126,7 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
cpu = cpu_logical_map(i);
/* Protect against other affinity changers and IMR manipulation */
- spin_lock_irqsave(&desc->lock, flags);
- spin_lock(&bcm1480_imr_lock);
+ spin_lock_irqsave(&bcm1480_imr_lock, flags);
/* Swizzle each CPU's IMR (but leave the IP selection alone) */
old_cpu = bcm1480_irq_owner[irq];
@@ -153,8 +151,7 @@ static void bcm1480_set_affinity(unsigned int irq, const struct cpumask *mask)
____raw_writeq(cur_ints, IOADDR(A_BCM1480_IMR_MAPPER(cpu) + R_BCM1480_IMR_INTERRUPT_MASK_H + (k*BCM1480_IMR_HL_SPACING)));
}
}
- spin_unlock(&bcm1480_imr_lock);
- spin_unlock_irqrestore(&desc->lock, flags);
+ spin_unlock_irqrestore(&bcm1480_imr_lock, flags);
}
#endif
diff --git a/arch/mips/sibyte/sb1250/irq.c b/arch/mips/sibyte/sb1250/irq.c
index c08ff582da6..38cb998ade2 100644
--- a/arch/mips/sibyte/sb1250/irq.c
+++ b/arch/mips/sibyte/sb1250/irq.c
@@ -107,7 +107,6 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
{
int i = 0, old_cpu, cpu, int_on;
u64 cur_ints;
- struct irq_desc *desc = irq_desc + irq;
unsigned long flags;
i = cpumask_first(mask);
@@ -121,8 +120,7 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
cpu = cpu_logical_map(i);
/* Protect against other affinity changers and IMR manipulation */
- spin_lock_irqsave(&desc->lock, flags);
- spin_lock(&sb1250_imr_lock);
+ spin_lock_irqsave(&sb1250_imr_lock, flags);
/* Swizzle each CPU's IMR (but leave the IP selection alone) */
old_cpu = sb1250_irq_owner[irq];
@@ -144,8 +142,7 @@ static void sb1250_set_affinity(unsigned int irq, const struct cpumask *mask)
____raw_writeq(cur_ints, IOADDR(A_IMR_MAPPER(cpu) +
R_IMR_INTERRUPT_MASK));
}
- spin_unlock(&sb1250_imr_lock);
- spin_unlock_irqrestore(&desc->lock, flags);
+ spin_unlock_irqrestore(&sb1250_imr_lock, flags);
}
#endif
diff --git a/arch/mips/txx9/generic/setup_tx4927.c b/arch/mips/txx9/generic/setup_tx4927.c
index 914e93c6263..1093549df1a 100644
--- a/arch/mips/txx9/generic/setup_tx4927.c
+++ b/arch/mips/txx9/generic/setup_tx4927.c
@@ -88,7 +88,7 @@ void __init tx4927_setup(void)
{
int i;
__u32 divmode;
- int cpuclk = 0;
+ unsigned int cpuclk = 0;
u64 ccfg;
txx9_reg_res_init(TX4927_REV_PCODE(), TX4927_REG_BASE,
diff --git a/arch/mips/txx9/generic/setup_tx4938.c b/arch/mips/txx9/generic/setup_tx4938.c
index f0844f891f0..3925219b897 100644
--- a/arch/mips/txx9/generic/setup_tx4938.c
+++ b/arch/mips/txx9/generic/setup_tx4938.c
@@ -93,7 +93,7 @@ void __init tx4938_setup(void)
{
int i;
__u32 divmode;
- int cpuclk = 0;
+ unsigned int cpuclk = 0;
u64 ccfg;
txx9_reg_res_init(TX4938_REV_PCODE(), TX4938_REG_BASE,
diff --git a/arch/mips/txx9/generic/setup_tx4939.c b/arch/mips/txx9/generic/setup_tx4939.c
index 7a25b573e9b..c2bf150c883 100644
--- a/arch/mips/txx9/generic/setup_tx4939.c
+++ b/arch/mips/txx9/generic/setup_tx4939.c
@@ -114,7 +114,7 @@ void __init tx4939_setup(void)
int i;
__u32 divmode;
__u64 pcfg;
- int cpuclk = 0;
+ unsigned int cpuclk = 0;
txx9_reg_res_init(TX4939_REV_PCODE(), TX4939_REG_BASE,
TX4939_REG_SIZE);
diff --git a/arch/mips/txx9/rbtx4939/setup.c b/arch/mips/txx9/rbtx4939/setup.c
index 011e1e332f4..4199c6fd4d1 100644
--- a/arch/mips/txx9/rbtx4939/setup.c
+++ b/arch/mips/txx9/rbtx4939/setup.c
@@ -536,7 +536,7 @@ static void __init rbtx4939_setup(void)
}
struct txx9_board_vec rbtx4939_vec __initdata = {
- .system = "Tothiba RBTX4939",
+ .system = "Toshiba RBTX4939",
.prom_init = rbtx4939_prom_init,
.mem_setup = rbtx4939_setup,
.irq_setup = rbtx4939_irq_setup,
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig
index 4c780455136..a0d1146a057 100644
--- a/arch/powerpc/Kconfig
+++ b/arch/powerpc/Kconfig
@@ -181,6 +181,10 @@ config SYS_SUPPORTS_APM_EMULATION
default y if PMAC_APM_EMU
bool
+config DTC
+ bool
+ default y
+
config DEFAULT_UIMAGE
bool
help
diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile
index 4458abb67c5..9ae7b7e2ba7 100644
--- a/arch/powerpc/boot/Makefile
+++ b/arch/powerpc/boot/Makefile
@@ -33,7 +33,7 @@ ifeq ($(call cc-option-yn, -fstack-protector),y)
BOOTCFLAGS += -fno-stack-protector
endif
-BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt
+BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj)
DTS_FLAGS ?= -p 1024
@@ -53,9 +53,14 @@ zliblinuxheader := zlib.h zconf.h zutil.h
$(addprefix $(obj)/,$(zlib) cuboot-c2k.o gunzip_util.o main.o prpmc2800.o): \
$(addprefix $(obj)/,$(zliblinuxheader)) $(addprefix $(obj)/,$(zlibheader))
-src-libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
+libfdt := fdt.c fdt_ro.c fdt_wip.c fdt_sw.c fdt_rw.c fdt_strerror.c
+libfdtheader := fdt.h libfdt.h libfdt_internal.h
+
+$(addprefix $(obj)/,$(libfdt) libfdt-wrapper.o simpleboot.o): \
+ $(addprefix $(obj)/,$(libfdtheader))
+
src-wlib := string.S crt0.S crtsavres.S stdio.c main.c \
- $(addprefix libfdt/,$(src-libfdt)) libfdt-wrapper.c \
+ $(libfdt) libfdt-wrapper.c \
ns16550.c serial.c simple_alloc.c div64.S util.S \
gunzip_util.c elf_util.c $(zlib) devtree.c oflib.c ofconsole.c \
4xx.c ebony.c mv64x60.c mpsc.c mv64x60_i2c.c cuboot.c bamboo.c \
@@ -96,6 +101,12 @@ $(addprefix $(obj)/,$(zlibheader)): $(obj)/%: $(srctree)/lib/zlib_inflate/%
$(addprefix $(obj)/,$(zliblinuxheader)): $(obj)/%: $(srctree)/include/linux/%
$(call cmd,copy_zliblinuxheader)
+quiet_cmd_copy_libfdt = COPY $@
+ cmd_copy_libfdt = cp $< $@
+
+$(addprefix $(obj)/,$(libfdt) $(libfdtheader)): $(obj)/%: $(srctree)/scripts/dtc/libfdt/%
+ $(call cmd,copy_libfdt)
+
$(obj)/empty.c:
@touch $@
@@ -103,6 +114,7 @@ $(obj)/zImage.lds $(obj)/zImage.coff.lds $(obj)/zImage.ps3.lds: $(obj)/%: $(srct
@cp $< $@
clean-files := $(zlib) $(zlibheader) $(zliblinuxheader) \
+ $(libfdt) $(libfdtheader) \
empty.c zImage.coff.lds zImage.ps3.lds zImage.lds
quiet_cmd_bootcc = BOOTCC $@
@@ -114,6 +126,8 @@ quiet_cmd_bootas = BOOTAS $@
quiet_cmd_bootar = BOOTAR $@
cmd_bootar = $(CROSS32AR) -cr $@.$$$$ $(filter-out FORCE,$^); mv $@.$$$$ $@
+$(obj-libfdt): $(obj)/%.o: $(srctree)/scripts/dtc/libfdt/%.c FORCE
+ $(call if_changed_dep,bootcc)
$(patsubst %.c,%.o, $(filter %.c, $(src-boot))): %.o: %.c FORCE
$(Q)mkdir -p $(dir $@)
$(call if_changed_dep,bootcc)
@@ -124,7 +138,7 @@ $(patsubst %.S,%.o, $(filter %.S, $(src-boot))): %.o: %.S FORCE
$(obj)/wrapper.a: $(obj-wlib) FORCE
$(call if_changed,bootar)
-hostprogs-y := addnote addRamDisk hack-coff mktree dtc
+hostprogs-y := addnote addRamDisk hack-coff mktree
targets += $(patsubst $(obj)/%,%,$(obj-boot) wrapper.a)
extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
@@ -133,47 +147,10 @@ extra-y := $(obj)/wrapper.a $(obj-plat) $(obj)/empty.o \
dtstree := $(srctree)/$(src)/dts
wrapper :=$(srctree)/$(src)/wrapper
-wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree dtc) \
+wrapperbits := $(extra-y) $(addprefix $(obj)/,addnote hack-coff mktree) \
$(wrapper) FORCE
#############
-# Bits for building dtc
-# DTC_GENPARSER := 1 # Uncomment to rebuild flex/bison output
-
-dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o srcpos.o checks.o
-dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
-dtc-objs := $(addprefix dtc-src/, $(dtc-objs))
-
-# prerequisites on generated files needs to be explicit
-$(obj)/dtc-src/dtc-parser.tab.o: $(obj)/dtc-src/dtc-parser.tab.c $(obj)/dtc-src/dtc-parser.tab.h
-$(obj)/dtc-src/dtc-lexer.lex.o: $(obj)/dtc-src/dtc-lexer.lex.c $(obj)/dtc-src/dtc-parser.tab.h
-
-HOSTCFLAGS += -I$(src)/dtc-src/ -I$(src)/libfdt/
-
-targets += dtc-src/dtc-parser.tab.c
-targets += dtc-src/dtc-lexer.lex.c
-
-clean-files += dtc-src/dtc-parser.tab.h
-
-ifdef DTC_GENPARSER
-BISON = bison
-FLEX = flex
-
-quiet_cmd_bison = BISON $@
- cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped
-quiet_cmd_flex = FLEX $@
- cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
-
-$(obj)/dtc-src/dtc-parser.tab.c: $(src)/dtc-src/dtc-parser.y FORCE
- $(call if_changed,bison)
-
-$(obj)/dtc-src/dtc-parser.tab.h: $(obj)/dtc-src/dtc-parser.tab.c
-
-$(obj)/dtc-src/dtc-lexer.lex.c: $(src)/dtc-src/dtc-lexer.l FORCE
- $(call if_changed,flex)
-endif
-
-#############
# Bits for building various flavours of zImage
ifneq ($(CROSS32_COMPILE),)
@@ -347,8 +324,10 @@ $(obj)/treeImage.%: vmlinux $(obj)/%.dtb $(wrapperbits)
$(call if_changed,wrap,treeboot-$*,,$(obj)/$*.dtb)
# Rule to build device tree blobs
-$(obj)/%.dtb: $(dtstree)/%.dts $(obj)/dtc
- $(obj)/dtc -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
+DTC = $(objtree)/scripts/dtc/dtc
+
+$(obj)/%.dtb: $(dtstree)/%.dts
+ $(DTC) -O dtb -o $(obj)/$*.dtb -b 0 $(DTS_FLAGS) $(dtstree)/$*.dts
# If there isn't a platform selected then just strip the vmlinux.
ifeq (,$(image-y))
@@ -367,7 +346,7 @@ install: $(CONFIGURE) $(addprefix $(obj)/, $(image-y))
clean-files += $(image-) $(initrd-) cuImage.* dtbImage.* treeImage.* \
zImage zImage.initrd zImage.chrp zImage.coff zImage.holly \
zImage.iseries zImage.miboot zImage.pmac zImage.pseries \
- otheros.bld *.dtb
+ simpleImage.* otheros.bld *.dtb
# clean up files cached by wrapper
clean-kernel := vmlinux.strip vmlinux.bin
diff --git a/arch/powerpc/boot/mktree.c b/arch/powerpc/boot/mktree.c
index 45d06a8c7cd..c2baae0a3d8 100644
--- a/arch/powerpc/boot/mktree.c
+++ b/arch/powerpc/boot/mktree.c
@@ -42,7 +42,7 @@ int main(int argc, char *argv[])
{
int in_fd, out_fd;
int nblks, i;
- uint cksum, *cp;
+ unsigned int cksum, *cp;
struct stat st;
boot_block_t bt;
@@ -90,7 +90,7 @@ int main(int argc, char *argv[])
cksum = 0;
cp = (void *)&bt;
- for (i=0; i<sizeof(bt)/sizeof(uint); i++)
+ for (i = 0; i < sizeof(bt) / sizeof(unsigned int); i++)
cksum += *cp++;
/* Assume zImage is an ELF file, and skip the 64K header.
@@ -101,7 +101,7 @@ int main(int argc, char *argv[])
exit(4);
}
- if ((*(uint *)tmpbuf) != htonl(0x7f454c46)) {
+ if ((*(unsigned int *)tmpbuf) != htonl(0x7f454c46)) {
fprintf(stderr, "%s is not an ELF image\n", argv[1]);
exit(4);
}
@@ -125,8 +125,8 @@ int main(int argc, char *argv[])
perror("zImage read");
exit(5);
}
- cp = (uint *)tmpbuf;
- for (i=0; i<sizeof(tmpbuf)/sizeof(uint); i++)
+ cp = (unsigned int *)tmpbuf;
+ for (i = 0; i < sizeof(tmpbuf) / sizeof(unsigned int); i++)
cksum += *cp++;
if (write(out_fd, tmpbuf, sizeof(tmpbuf)) != sizeof(tmpbuf)) {
perror("boot-image write");
diff --git a/arch/powerpc/boot/simpleboot.c b/arch/powerpc/boot/simpleboot.c
index c58a0dada99..21cd48074ec 100644
--- a/arch/powerpc/boot/simpleboot.c
+++ b/arch/powerpc/boot/simpleboot.c
@@ -19,7 +19,7 @@
#include "types.h"
#include "io.h"
#include "stdio.h"
-#include "libfdt/libfdt.h"
+#include <libfdt.h>
BSS_STACK(4*1024);
diff --git a/arch/powerpc/configs/83xx/asp8347_defconfig b/arch/powerpc/configs/83xx/asp8347_defconfig
index fc4a39a40e7..27893971377 100644
--- a/arch/powerpc/configs/83xx/asp8347_defconfig
+++ b/arch/powerpc/configs/83xx/asp8347_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:47 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:05 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_ALTIVEC is not set
@@ -57,6 +58,7 @@ CONFIG_REDBOOT=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -74,6 +76,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -88,19 +99,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -110,16 +124,19 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -184,6 +193,8 @@ CONFIG_ASP834x=y
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -469,7 +483,6 @@ CONFIG_MTD_PHYSMAP_OF=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -499,13 +512,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -532,6 +552,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -565,6 +586,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -584,6 +607,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -594,11 +618,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -608,7 +633,6 @@ CONFIG_GIANFAR=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -759,12 +783,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -796,6 +817,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -810,11 +832,14 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -959,11 +984,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_LIBUSUAL is not set
@@ -991,7 +1016,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1006,6 +1030,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1067,8 +1092,9 @@ CONFIG_RTC_DRV_DS1374=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1079,6 +1105,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1101,6 +1128,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1154,6 +1186,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1166,7 +1199,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1233,6 +1265,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1248,11 +1281,12 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1274,13 +1308,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_LATENCYTOP is not set
# CONFIG_SYSCTL_SYSCALL_CHECK is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -1309,10 +1354,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1381,6 +1428,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
index 409d017621a..c5c0fe71a43 100644
--- a/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8313_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:48 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:06 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC831x_RDB=y
CONFIG_PPC_MPC831x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -481,7 +495,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -512,13 +525,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -576,9 +597,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -600,6 +623,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
@@ -626,6 +650,7 @@ CONFIG_MD_RAID1=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -660,6 +685,8 @@ CONFIG_MII=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -697,6 +724,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -707,11 +735,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -721,6 +750,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -730,6 +760,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -737,7 +768,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -815,6 +845,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@@ -827,6 +858,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -889,12 +921,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -914,7 +943,6 @@ CONFIG_SPI_MPC83xx=y
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -942,6 +970,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -957,12 +986,15 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -981,6 +1013,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
@@ -1077,7 +1110,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1135,11 +1167,11 @@ CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1181,7 +1213,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1228,6 +1259,7 @@ CONFIG_USB_ETH_RNDIS=y
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1296,8 +1328,9 @@ CONFIG_RTC_DRV_DS1307=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1308,6 +1341,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1330,6 +1364,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1383,6 +1422,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1395,7 +1435,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1427,6 +1466,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1442,11 +1482,12 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1464,6 +1505,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1493,9 +1537,12 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1503,17 +1550,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1544,10 +1593,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1616,6 +1667,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
index 03db97c6cf3..af4952feba3 100644
--- a/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc8315_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:49 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:06 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC831x_RDB=y
CONFIG_PPC_MPC831x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -481,7 +495,6 @@ CONFIG_MTD_NAND_IDS=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -512,13 +525,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -576,9 +597,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -601,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -687,6 +711,7 @@ CONFIG_MD_RAID1=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -721,6 +746,8 @@ CONFIG_MII=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -758,6 +785,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -768,11 +796,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -782,6 +811,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -791,6 +821,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -798,7 +829,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -876,6 +906,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@@ -888,6 +919,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -950,12 +982,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -975,7 +1004,6 @@ CONFIG_SPI_MPC83xx=y
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -1003,6 +1031,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -1018,12 +1047,15 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -1042,6 +1074,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
@@ -1138,7 +1171,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1196,11 +1228,11 @@ CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1242,7 +1274,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1289,6 +1320,7 @@ CONFIG_USB_ETH_RNDIS=y
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1357,8 +1389,9 @@ CONFIG_RTC_DRV_DS1307=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1369,6 +1402,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1391,6 +1425,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1444,6 +1483,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1456,7 +1496,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1488,6 +1527,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1503,11 +1543,12 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1525,6 +1566,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1554,9 +1598,12 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1564,17 +1611,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1605,10 +1654,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1677,6 +1728,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
index fb17de53cc0..8c8f660b4fc 100644
--- a/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:50 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:07 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC832x_MDS=y
CONFIG_PPC_MPC832x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -411,13 +425,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -475,9 +496,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -499,6 +522,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -515,6 +539,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -548,6 +573,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -567,6 +594,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -577,14 +605,15 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -594,6 +623,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -603,6 +633,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -610,7 +641,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -692,6 +722,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -753,12 +784,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -790,6 +818,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -804,11 +833,14 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -906,7 +938,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -920,7 +951,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -988,8 +1019,9 @@ CONFIG_RTC_DRV_DS1374=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1000,6 +1032,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1022,6 +1055,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1064,6 +1102,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1076,7 +1115,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1106,6 +1144,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_DLM is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1119,11 +1158,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1145,13 +1186,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -1180,10 +1232,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1252,6 +1306,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
index a012ce23520..227dbba7679 100644
--- a/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc832x_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:52 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:08 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC832x_RDB=y
CONFIG_PPC_MPC832x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -245,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -413,13 +427,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -477,9 +499,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -501,6 +525,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -517,6 +542,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -551,6 +577,8 @@ CONFIG_MII=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -570,6 +598,7 @@ CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -580,14 +609,15 @@ CONFIG_E1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -597,6 +627,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -606,6 +637,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -613,7 +645,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -691,6 +722,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@@ -704,6 +736,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
@@ -768,12 +801,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -792,7 +822,6 @@ CONFIG_SPI_MPC83xx=y
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -820,6 +849,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -835,12 +865,15 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -859,6 +892,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
# CONFIG_HWMON_DEBUG_CHIP is not set
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
@@ -955,7 +989,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1012,11 +1045,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1058,7 +1091,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1074,6 +1106,7 @@ CONFIG_USB_STORAGE=y
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
CONFIG_MMC=y
# CONFIG_MMC_DEBUG is not set
@@ -1101,6 +1134,7 @@ CONFIG_MMC_SPI=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1111,6 +1145,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1133,6 +1168,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1178,6 +1218,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1190,7 +1231,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1264,6 +1304,7 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_DLM is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1277,11 +1318,13 @@ CONFIG_CRC_ITU_T=y
CONFIG_CRC32=y
CONFIG_CRC7=y
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1303,13 +1346,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -1338,10 +1392,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1410,6 +1466,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
index 4bcc4a1ff30..24ee7fcac87 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:53 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:09 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC834x_ITX=y
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -465,7 +479,6 @@ CONFIG_MTD_PHYSMAP=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -496,13 +509,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
@@ -608,9 +629,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -633,6 +656,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -720,6 +744,7 @@ CONFIG_MD_RAID1=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -755,6 +780,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -765,11 +791,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -779,6 +806,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -788,6 +816,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -795,7 +824,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -853,6 +881,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@@ -865,6 +894,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -927,12 +957,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -951,7 +978,6 @@ CONFIG_SPI_MPC83xx=y
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -1083,11 +1109,11 @@ CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1128,7 +1154,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1144,6 +1169,7 @@ CONFIG_USB_STORAGE=y
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1212,8 +1238,9 @@ CONFIG_RTC_DRV_DS1307=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1224,6 +1251,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1246,6 +1274,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1292,6 +1325,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1304,7 +1338,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1375,6 +1408,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1388,11 +1422,13 @@ CONFIG_CRC_T10DIF=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1414,13 +1450,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -1449,10 +1496,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1521,6 +1570,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
index 9ba5518ce8d..7f39543205a 100644
--- a/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_itxgp_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:55 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:10 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC834x_ITX=y
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -465,7 +479,6 @@ CONFIG_MTD_PHYSMAP=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -496,13 +509,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -560,9 +581,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -584,6 +607,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -600,6 +624,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -635,6 +660,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -645,11 +671,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -659,6 +686,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -668,6 +696,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -675,7 +704,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -733,6 +761,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@@ -745,6 +774,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -807,12 +837,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
CONFIG_SENSORS_PCF8574=y
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -831,7 +858,6 @@ CONFIG_SPI_MPC83xx=y
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -963,11 +989,11 @@ CONFIG_USB_UHCI_HCD=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1008,7 +1034,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1023,6 +1048,7 @@ CONFIG_USB_STORAGE=y
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1091,8 +1117,9 @@ CONFIG_RTC_DRV_DS1307=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1103,6 +1130,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1125,6 +1153,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1171,6 +1204,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1183,7 +1217,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1254,6 +1287,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1267,11 +1301,13 @@ CONFIG_CRC_T10DIF=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1293,13 +1329,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -1328,10 +1375,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1400,6 +1449,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
index 18e4bc0b3c1..1cd1fcac22c 100644
--- a/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc834x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:56 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:11 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC834x_MDS=y
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -410,13 +424,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -443,6 +464,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -476,6 +498,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -513,6 +537,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -523,11 +548,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -537,6 +563,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -546,6 +573,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -553,7 +581,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -694,12 +721,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -731,6 +755,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -745,11 +770,14 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -847,7 +875,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -861,7 +888,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -929,8 +956,9 @@ CONFIG_RTC_DRV_DS1374=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -941,6 +969,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -963,6 +992,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1005,6 +1039,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1017,7 +1052,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1045,6 +1079,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1058,11 +1093,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1084,13 +1121,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -1119,10 +1167,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1191,6 +1241,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
index 76db8138eac..ce5177393a0 100644
--- a/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:58 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:12 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -109,16 +123,19 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -131,7 +148,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -147,18 +163,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -182,6 +191,8 @@ CONFIG_MPC836x_MDS=y
# CONFIG_ASP834x is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -243,9 +254,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -271,6 +285,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -293,7 +308,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -349,6 +363,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -361,7 +376,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -464,7 +478,6 @@ CONFIG_MTD_PHYSMAP_OF=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -493,13 +506,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -557,9 +577,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -581,6 +603,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -597,6 +620,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -630,6 +654,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -649,6 +675,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -659,14 +686,15 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -676,6 +704,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -685,6 +714,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -692,7 +722,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -774,6 +803,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -835,12 +865,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -872,6 +899,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -886,11 +914,14 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -988,7 +1019,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1002,7 +1032,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -1070,8 +1100,9 @@ CONFIG_RTC_DRV_DS1374=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1082,6 +1113,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1104,6 +1136,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1147,6 +1184,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1159,7 +1197,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1189,6 +1226,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_DLM is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1202,11 +1240,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1228,13 +1268,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -1263,10 +1314,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1335,6 +1388,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
index 0dc11c44306..7f1d1383a24 100644
--- a/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
+++ b/arch/powerpc/configs/83xx/mpc836x_rdk_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:01 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:13 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
@@ -57,6 +58,7 @@ CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -74,6 +76,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -88,19 +99,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -110,16 +124,19 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -183,6 +192,8 @@ CONFIG_MPC836x_RDK=y
# CONFIG_ASP834x is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -243,9 +254,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -273,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -295,7 +310,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -351,6 +365,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -363,7 +378,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -475,7 +489,6 @@ CONFIG_MTD_PHYSMAP_OF=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -506,13 +519,21 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -539,6 +560,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -574,6 +596,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -584,14 +607,15 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
# CONFIG_GIANFAR is not set
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -601,7 +625,6 @@ CONFIG_UCC_GETH=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -673,6 +696,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=4
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
@@ -686,6 +710,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
@@ -749,12 +774,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -774,7 +796,6 @@ CONFIG_SPI_MPC83xx=y
#
# SPI Protocol Masters
#
-# CONFIG_EEPROM_AT25 is not set
CONFIG_SPI_SPIDEV=y
# CONFIG_SPI_TLE62X0 is not set
CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
@@ -924,6 +945,7 @@ CONFIG_FB_OF=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -956,7 +978,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
@@ -967,6 +988,7 @@ CONFIG_HID_COMPAT=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -977,6 +999,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -999,6 +1022,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1052,6 +1080,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1064,7 +1093,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1095,6 +1123,7 @@ CONFIG_PARTITION_ADVANCED=y
CONFIG_UCC_SLOW=y
CONFIG_UCC_FAST=y
CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1110,11 +1139,12 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1136,13 +1166,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -1182,10 +1223,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1254,6 +1297,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
index e42f6b3917d..bf636fd560a 100644
--- a/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_mds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:59 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:12 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -87,20 +98,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -109,10 +123,12 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -120,6 +136,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -184,6 +193,8 @@ CONFIG_MPC837x_MDS=y
CONFIG_PPC_MPC837x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -350,6 +364,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -362,7 +377,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -410,13 +424,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -474,9 +495,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -499,6 +522,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -575,6 +599,7 @@ CONFIG_ATA_SFF=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -608,6 +633,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -627,6 +654,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -637,11 +665,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -651,6 +680,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -660,6 +690,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -667,7 +698,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -811,12 +841,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -848,6 +875,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -862,11 +890,14 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -964,7 +995,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -978,7 +1008,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -994,6 +1024,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1004,6 +1035,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1026,6 +1058,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1068,6 +1105,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1080,7 +1118,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1112,6 +1149,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1125,11 +1163,13 @@ CONFIG_CRC_T10DIF=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1149,13 +1189,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -1184,10 +1235,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1256,6 +1309,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
index 408022f79a5..fe6454eacbd 100644
--- a/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
+++ b/arch/powerpc/configs/83xx/mpc837x_rdb_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:01 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:14 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -87,20 +98,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -109,10 +123,12 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -120,6 +136,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -148,18 +164,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -184,6 +193,8 @@ CONFIG_MPC837x_RDB=y
CONFIG_PPC_MPC837x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -244,9 +255,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -272,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -294,7 +309,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -345,6 +359,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -357,7 +372,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -406,13 +420,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -469,9 +490,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -494,6 +517,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -563,7 +587,7 @@ CONFIG_MD_AUTODETECT=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
@@ -581,6 +605,7 @@ CONFIG_MD_RAID5_RESHAPE=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -614,6 +639,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -633,6 +660,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -643,11 +671,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -657,7 +686,6 @@ CONFIG_GIANFAR=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -811,12 +839,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -848,6 +873,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -862,11 +888,14 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -976,15 +1005,17 @@ CONFIG_USB_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1050,11 +1081,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
@@ -1084,7 +1115,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1099,6 +1129,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1108,6 +1139,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1118,6 +1150,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1140,6 +1173,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1182,6 +1220,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1194,7 +1233,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1226,6 +1264,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1239,11 +1278,13 @@ CONFIG_CRC_T10DIF=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1263,13 +1304,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -1302,10 +1354,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1374,6 +1428,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/83xx/sbc834x_defconfig b/arch/powerpc/configs/83xx/sbc834x_defconfig
index a0c42fb65cb..fe08f672cb2 100644
--- a/arch/powerpc/configs/83xx/sbc834x_defconfig
+++ b/arch/powerpc/configs/83xx/sbc834x_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:02 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:15 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
@@ -56,6 +57,7 @@ CONFIG_DEFAULT_UIMAGE=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -87,19 +98,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -108,16 +122,19 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -146,18 +162,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -182,6 +191,8 @@ CONFIG_SBC834x=y
CONFIG_PPC_MPC834x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -242,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -270,6 +284,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -292,7 +307,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -348,6 +362,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -360,7 +375,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -408,13 +422,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -441,6 +462,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -474,6 +496,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -493,6 +517,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -503,11 +528,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -517,7 +543,6 @@ CONFIG_GIANFAR=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -660,12 +685,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -697,6 +719,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -711,11 +734,14 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -813,7 +839,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
@@ -824,6 +849,7 @@ CONFIG_HID_COMPAT=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -849,6 +875,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -891,6 +922,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -903,7 +935,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -919,6 +950,7 @@ CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -932,11 +964,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -956,13 +990,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -991,10 +1036,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1063,6 +1110,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/85xx/ksi8560_defconfig b/arch/powerpc/configs/85xx/ksi8560_defconfig
index 6479bb9f3f5..09146ddaa3c 100644
--- a/arch/powerpc/configs/85xx/ksi8560_defconfig
+++ b/arch/powerpc/configs/85xx/ksi8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:03 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:16 2009
#
# CONFIG_PPC64 is not set
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
# CONFIG_GROUP_SCHED is not set
@@ -86,21 +97,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -109,10 +123,12 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -120,6 +136,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -127,7 +144,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -143,11 +159,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -163,6 +174,7 @@ CONFIG_MPC85xx=y
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
CONFIG_KSI8560=y
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
@@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
@@ -264,17 +279,17 @@ CONFIG_PPC_PCI_CHOICE=y
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -330,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -342,7 +358,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -444,7 +459,6 @@ CONFIG_MTD_PHYSMAP_OF=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -467,9 +481,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
@@ -502,6 +520,7 @@ CONFIG_IDE_PROC_FS=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -531,6 +550,8 @@ CONFIG_MDIO_BITBANG=y
# CONFIG_MDIO_GPIO is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -544,6 +565,7 @@ CONFIG_FS_ENET=y
CONFIG_FS_ENET_HAS_FCC=y
CONFIG_FS_ENET_MDIO_FCC=y
CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_NETDEV_10000=y
@@ -552,7 +574,6 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -624,6 +645,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
@@ -663,6 +685,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
# CONFIG_SENSORS_VT1211 is not set
@@ -726,7 +749,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -739,7 +761,7 @@ CONFIG_USB_SUPPORT=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -753,6 +775,7 @@ CONFIG_USB_SUPPORT=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -763,6 +786,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -786,6 +810,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -829,6 +858,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
@@ -838,7 +868,6 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -866,6 +895,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -879,11 +909,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -901,6 +933,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -931,9 +966,12 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -941,17 +979,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1045,6 +1086,7 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
index 905e8a3388d..7b43be7586b 100644
--- a/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8540_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:05 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:17 2009
#
# CONFIG_PPC64 is not set
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -112,16 +126,19 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -129,7 +146,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -145,11 +161,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -165,6 +176,7 @@ CONFIG_MPC8540_ADS=y
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
@@ -233,9 +245,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -266,17 +281,17 @@ CONFIG_PPC_PCI_CHOICE=y
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -332,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -344,7 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -387,9 +402,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -404,6 +423,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -432,6 +452,8 @@ CONFIG_PHYLIB=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -441,6 +463,7 @@ CONFIG_MII=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_NETDEV_10000=y
@@ -449,7 +472,6 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -607,7 +629,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -620,7 +641,7 @@ CONFIG_USB_SUPPORT=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -634,6 +655,7 @@ CONFIG_USB_SUPPORT=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -644,6 +666,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -666,6 +689,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -708,6 +736,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
@@ -717,7 +746,6 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -745,6 +773,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -758,11 +787,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -780,6 +811,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -809,9 +843,12 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -819,17 +856,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -922,6 +961,7 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
index 095e2ded6e8..62adb71a5d4 100644
--- a/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
+++ b/arch/powerpc/configs/85xx/mpc8560_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:09 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:17 2009
#
# CONFIG_PPC64 is not set
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -90,21 +101,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -114,10 +128,12 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -125,6 +141,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -132,7 +149,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -148,11 +164,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -168,6 +179,7 @@ CONFIG_MPC8560_ADS=y
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
@@ -236,9 +248,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
@@ -264,6 +279,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -277,17 +293,17 @@ CONFIG_PCI_DEBUG=y
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -343,6 +359,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -355,7 +372,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -405,12 +421,16 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -437,6 +457,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -470,6 +491,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -493,6 +516,7 @@ CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -503,10 +527,12 @@ CONFIG_E1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -516,6 +542,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -525,6 +552,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -532,7 +560,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -608,6 +635,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
@@ -651,6 +679,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_IT87 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
# CONFIG_SENSORS_SMSC47B397 is not set
@@ -719,7 +748,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -733,7 +761,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -749,6 +777,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -759,6 +788,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -781,6 +811,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -823,6 +858,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
@@ -832,7 +868,6 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -860,6 +895,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -873,11 +909,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -895,6 +933,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -924,9 +965,12 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -934,17 +978,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1037,6 +1083,7 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
index f95961c04a2..41209e3a654 100644
--- a/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
+++ b/arch/powerpc/configs/85xx/mpc85xx_cds_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:13 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:18 2009
#
# CONFIG_PPC64 is not set
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -113,16 +127,19 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -166,6 +177,7 @@ CONFIG_MPC85xx_CDS=y
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
@@ -234,9 +246,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -275,17 +291,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -341,6 +357,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -353,7 +370,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -402,18 +418,23 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
@@ -488,6 +509,7 @@ CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -521,6 +543,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -540,6 +564,7 @@ CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -550,10 +575,12 @@ CONFIG_E1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -563,6 +590,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -572,6 +600,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -579,7 +608,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -750,7 +778,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -764,7 +791,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -780,6 +807,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -790,6 +818,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -812,6 +841,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -854,6 +888,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
@@ -863,7 +898,6 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -891,6 +925,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -904,11 +939,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -926,6 +963,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -955,9 +995,12 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -965,17 +1008,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1068,6 +1113,7 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/85xx/sbc8548_defconfig b/arch/powerpc/configs/85xx/sbc8548_defconfig
index e68e80987aa..6c36c9c7abf 100644
--- a/arch/powerpc/configs/85xx/sbc8548_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8548_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:15 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:19 2009
#
# CONFIG_PPC64 is not set
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -89,20 +100,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -111,16 +125,19 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -164,6 +175,7 @@ CONFIG_MPC85xx=y
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
@@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -258,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -271,17 +287,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -337,6 +353,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -349,7 +366,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -396,12 +412,16 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -428,6 +448,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -461,6 +482,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -480,6 +503,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -490,10 +514,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -503,6 +529,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -512,6 +539,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -519,7 +547,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -692,6 +719,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -717,6 +745,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -759,6 +792,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
@@ -768,7 +802,6 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -784,6 +817,7 @@ CONFIG_SUNRPC=y
CONFIG_MSDOS_PARTITION=y
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -797,11 +831,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -821,13 +857,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -918,6 +965,7 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/85xx/sbc8560_defconfig b/arch/powerpc/configs/85xx/sbc8560_defconfig
index b1c766ef7e2..4aaf1a6bdc7 100644
--- a/arch/powerpc/configs/85xx/sbc8560_defconfig
+++ b/arch/powerpc/configs/85xx/sbc8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:17 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:20 2009
#
# CONFIG_PPC64 is not set
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -89,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -111,16 +125,19 @@ CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -164,6 +175,7 @@ CONFIG_MPC85xx=y
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
@@ -231,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -264,17 +279,17 @@ CONFIG_PPC_PCI_CHOICE=y
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -330,6 +345,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -342,7 +358,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -385,9 +400,13 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -402,6 +421,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -430,6 +450,8 @@ CONFIG_BROADCOM_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -439,6 +461,7 @@ CONFIG_MII=y
# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_B44 is not set
CONFIG_NETDEV_1000=y
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_NETDEV_10000=y
@@ -447,7 +470,6 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -603,7 +625,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -616,7 +637,7 @@ CONFIG_USB_SUPPORT=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -665,8 +686,9 @@ CONFIG_RTC_DRV_M48T59=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -692,6 +714,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -734,6 +761,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
@@ -743,7 +771,6 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -771,6 +798,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -784,11 +812,13 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -806,6 +836,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -834,9 +867,12 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -844,17 +880,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -958,6 +996,7 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/85xx/socrates_defconfig b/arch/powerpc/configs/85xx/socrates_defconfig
index 0cc9048290a..79984589db6 100644
--- a/arch/powerpc/configs/85xx/socrates_defconfig
+++ b/arch/powerpc/configs/85xx/socrates_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.26.2
-# Sat Oct 18 11:06:13 2008
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:21 2009
#
# CONFIG_PPC64 is not set
@@ -15,15 +15,19 @@ CONFIG_PPC_85xx=y
# CONFIG_44x is not set
# CONFIG_E200 is not set
CONFIG_E500=y
+# CONFIG_PPC_E500MC is not set
CONFIG_BOOKE=y
CONFIG_FSL_BOOKE=y
CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
+CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
+# CONFIG_SMP is not set
CONFIG_PPC32=y
CONFIG_WORD_SIZE=32
-CONFIG_PPC_MERGE=y
+# CONFIG_ARCH_PHYS_ADDR_T_64BIT is not set
CONFIG_MMU=y
CONFIG_GENERIC_CMOS_UPDATE=y
CONFIG_GENERIC_TIME=y
@@ -33,6 +37,7 @@ CONFIG_GENERIC_HARDIRQS=y
# CONFIG_HAVE_SETUP_PER_CPU_AREA is not set
CONFIG_IRQ_PER_CPU=y
CONFIG_STACKTRACE_SUPPORT=y
+CONFIG_HAVE_LATENCYTOP_SUPPORT=y
CONFIG_LOCKDEP_SUPPORT=y
CONFIG_RWSEM_XCHGADD_ALGORITHM=y
CONFIG_ARCH_HAS_ILOG2_U32=y
@@ -43,7 +48,7 @@ CONFIG_GENERIC_FIND_NEXT_BIT=y
CONFIG_PPC=y
CONFIG_EARLY_PRINTK=y
CONFIG_GENERIC_NVRAM=y
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
+CONFIG_SCHED_OMIT_FRAME_POINTER=y
CONFIG_ARCH_MAY_HAVE_PC_FDC=y
CONFIG_PPC_OF=y
CONFIG_OF=y
@@ -54,6 +59,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -71,54 +77,70 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=16
-# CONFIG_CGROUPS is not set
CONFIG_GROUP_SCHED=y
CONFIG_FAIR_GROUP_SCHED=y
# CONFIG_RT_GROUP_SCHED is not set
CONFIG_USER_SCHED=y
# CONFIG_CGROUP_SCHED is not set
+# CONFIG_CGROUPS is not set
CONFIG_SYSFS_DEPRECATED=y
CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_RELAY is not set
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
-CONFIG_SYSCTL_SYSCALL_CHECK=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
CONFIG_EVENTFD=y
CONFIG_SHMEM=y
+CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
+CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
+CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
+CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
-# CONFIG_HAVE_DMA_ATTRS is not set
-CONFIG_PROC_PAGE_MONITOR=y
+CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
+# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
-# CONFIG_TINY_SHMEM is not set
CONFIG_BASE_SMALL=0
CONFIG_MODULES=y
# CONFIG_MODULE_FORCE_LOAD is not set
@@ -126,12 +148,10 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_MODULE_FORCE_UNLOAD=y
# CONFIG_MODVERSIONS is not set
# CONFIG_MODULE_SRCVERSION_ALL is not set
-# CONFIG_KMOD is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
-# CONFIG_LSF is not set
# CONFIG_BLK_DEV_BSG is not set
+# CONFIG_BLK_DEV_INTEGRITY is not set
#
# IO Schedulers
@@ -145,13 +165,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
+# CONFIG_FREEZER is not set
#
# Platform support
#
-# CONFIG_PPC_MPC512x is not set
-# CONFIG_PPC_MPC5121 is not set
# CONFIG_PPC_CELL is not set
# CONFIG_PPC_CELL_NATIVE is not set
# CONFIG_PQ2ADS is not set
@@ -160,12 +178,14 @@ CONFIG_MPC85xx=y
# CONFIG_MPC8560_ADS is not set
# CONFIG_MPC85xx_CDS is not set
# CONFIG_MPC85xx_MDS is not set
+# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
CONFIG_SOCRATES=y
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
# CONFIG_TQM8541 is not set
+# CONFIG_TQM8548 is not set
# CONFIG_TQM8555 is not set
# CONFIG_TQM8560 is not set
# CONFIG_SBC8548 is not set
@@ -181,14 +201,16 @@ CONFIG_MPIC=y
# CONFIG_PPC_INDIRECT_IO is not set
# CONFIG_GENERIC_IOMAP is not set
# CONFIG_CPU_FREQ is not set
+# CONFIG_QUICC_ENGINE is not set
# CONFIG_CPM2 is not set
# CONFIG_FSL_ULI1575 is not set
+# CONFIG_MPC8xxx_GPIO is not set
+# CONFIG_SIMPLE_GPIO is not set
#
# Kernel options
#
# CONFIG_HIGHMEM is not set
-# CONFIG_TICK_ONESHOT is not set
# CONFIG_NO_HZ is not set
# CONFIG_HIGH_RES_TIMERS is not set
CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
@@ -202,6 +224,8 @@ CONFIG_PREEMPT_NONE=y
# CONFIG_PREEMPT_VOLUNTARY is not set
# CONFIG_PREEMPT is not set
CONFIG_BINFMT_ELF=y
+# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set
+# CONFIG_HAVE_AOUT is not set
# CONFIG_BINFMT_MISC is not set
CONFIG_MATH_EMULATION=y
# CONFIG_IOMMU_HELPER is not set
@@ -216,17 +240,24 @@ CONFIG_FLATMEM_MANUAL=y
# CONFIG_SPARSEMEM_MANUAL is not set
CONFIG_FLATMEM=y
CONFIG_FLAT_NODE_MEM_MAP=y
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
CONFIG_PAGEFLAGS_EXTENDED=y
CONFIG_SPLIT_PTLOCK_CPUS=4
-# CONFIG_RESOURCES_64BIT is not set
+CONFIG_MIGRATION=y
+# CONFIG_PHYS_ADDR_T_64BIT is not set
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
+CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
+CONFIG_PPC_4K_PAGES=y
+# CONFIG_PPC_16K_PAGES is not set
+# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
+CONFIG_EXTRA_TARGETS=""
# CONFIG_PM is not set
CONFIG_SECCOMP=y
CONFIG_ISA_DMA_API=y
@@ -238,6 +269,7 @@ CONFIG_ZONE_DMA=y
CONFIG_PPC_INDIRECT_PCI=y
CONFIG_FSL_SOC=y
CONFIG_FSL_PCI=y
+CONFIG_PPC_PCI_CHOICE=y
CONFIG_PCI=y
CONFIG_PCI_DOMAINS=y
CONFIG_PCI_SYSCALL=y
@@ -245,6 +277,8 @@ CONFIG_PCI_SYSCALL=y
CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
CONFIG_PCI_LEGACY=y
+# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
#
@@ -256,15 +290,12 @@ CONFIG_PCI_LEGACY=y
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
-
-#
-# Networking
-#
CONFIG_NET=y
#
@@ -315,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_TIPC is not set
# CONFIG_ATM is not set
# CONFIG_BRIDGE is not set
+# CONFIG_NET_DSA is not set
# CONFIG_VLAN_8021Q is not set
# CONFIG_DECNET is not set
# CONFIG_LLC2 is not set
@@ -324,7 +356,9 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
+# CONFIG_DCB is not set
#
# Network testing
@@ -339,27 +373,17 @@ CONFIG_CAN_BCM=y
# CAN Device Drivers
#
# CONFIG_CAN_VCAN is not set
-# CONFIG_CAN_OLD_DRIVERS is not set
-# CONFIG_CAN_SLCAN is not set
-CONFIG_CAN_SJA1000=y
-CONFIG_CAN_SJA1000_MEM_OF=y
-# CONFIG_CAN_EMS_PCI is not set
-# CONFIG_CAN_IXXAT_PCI is not set
-# CONFIG_CAN_PEAK_PCI is not set
-# CONFIG_CAN_KVASER_PCI is not set
-# CONFIG_CAN_MSCAN is not set
# CONFIG_CAN_DEBUG_DEVICES is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-
-#
-# Wireless
-#
+CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
+# CONFIG_WIRELESS_OLD_REGULATORY is not set
# CONFIG_WIRELESS_EXT is not set
+# CONFIG_LIB80211 is not set
# CONFIG_MAC80211 is not set
-# CONFIG_IEEE80211 is not set
+# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
# CONFIG_NET_9P is not set
@@ -378,6 +402,7 @@ CONFIG_MTD=y
# CONFIG_MTD_DEBUG is not set
CONFIG_MTD_CONCAT=y
CONFIG_MTD_PARTITIONS=y
+# CONFIG_MTD_TESTS is not set
# CONFIG_MTD_REDBOOT_PARTS is not set
CONFIG_MTD_CMDLINE_PARTS=y
CONFIG_MTD_OF_PARTS=y
@@ -458,15 +483,22 @@ CONFIG_MTD_NAND_IDS=y
# CONFIG_MTD_NAND_PLATFORM is not set
# CONFIG_MTD_ALAUDA is not set
# CONFIG_MTD_NAND_FSL_ELBC is not set
+# CONFIG_MTD_NAND_FSL_UPM is not set
CONFIG_MTD_NAND_SOCRATES=y
# CONFIG_MTD_ONENAND is not set
#
+# LPDDR flash memory drivers
+#
+# CONFIG_MTD_LPDDR is not set
+
+#
# UBI - Unsorted block images
#
# CONFIG_MTD_UBI is not set
CONFIG_OF_DEVICE=y
CONFIG_OF_I2C=y
+CONFIG_OF_SPI=y
# CONFIG_PARPORT is not set
CONFIG_BLK_DEV=y
# CONFIG_BLK_DEV_FD is not set
@@ -486,12 +518,24 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_XIP is not set
# CONFIG_CDROM_PKTCDVD is not set
# CONFIG_ATA_OVER_ETH is not set
+# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
+# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
+# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
+# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_AT25 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -533,6 +577,8 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_SAS_LIBSAS is not set
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
+# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -549,7 +595,7 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
-# CONFIG_NETDEVICES_MULTIQUEUE is not set
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -572,6 +618,9 @@ CONFIG_MARVELL_PHY=y
# CONFIG_BROADCOM_PHY is not set
# CONFIG_ICPLUS_PHY is not set
# CONFIG_REALTEK_PHY is not set
+# CONFIG_NATIONAL_PHY is not set
+# CONFIG_STE10XP is not set
+# CONFIG_LSI_ET1011C_PHY is not set
# CONFIG_FIXED_PHY is not set
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
@@ -581,22 +630,28 @@ CONFIG_MII=y
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
# CONFIG_ENC28J60 is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
+# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set
+# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set
+# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set
# CONFIG_NET_PCI is not set
# CONFIG_B44 is not set
+# CONFIG_ATL2 is not set
CONFIG_NETDEV_1000=y
# CONFIG_ACENIC is not set
# CONFIG_DL2K is not set
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
-# CONFIG_E1000E_ENABLED is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -607,10 +662,13 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-CONFIG_GFAR_NAPI=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
+# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
+# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -619,7 +677,10 @@ CONFIG_GFAR_NAPI=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
+
+#
+# Enable WiMAX (Networking options) to see the WiMAX drivers
+#
#
# USB Network Adapters
@@ -668,17 +729,23 @@ CONFIG_INPUT_EVDEV=y
# CONFIG_INPUT_TABLET is not set
CONFIG_INPUT_TOUCHSCREEN=y
# CONFIG_TOUCHSCREEN_ADS7846 is not set
+# CONFIG_TOUCHSCREEN_AD7877 is not set
+# CONFIG_TOUCHSCREEN_AD7879_I2C is not set
+# CONFIG_TOUCHSCREEN_AD7879_SPI is not set
+# CONFIG_TOUCHSCREEN_AD7879 is not set
# CONFIG_TOUCHSCREEN_FUJITSU is not set
# CONFIG_TOUCHSCREEN_GUNZE is not set
# CONFIG_TOUCHSCREEN_ELO is not set
+# CONFIG_TOUCHSCREEN_WACOM_W8001 is not set
# CONFIG_TOUCHSCREEN_MTOUCH is not set
+# CONFIG_TOUCHSCREEN_INEXIO is not set
# CONFIG_TOUCHSCREEN_MK712 is not set
# CONFIG_TOUCHSCREEN_PENMOUNT is not set
# CONFIG_TOUCHSCREEN_TOUCHRIGHT is not set
# CONFIG_TOUCHSCREEN_TOUCHWIN is not set
-# CONFIG_TOUCHSCREEN_UCB1400 is not set
-CONFIG_TOUCHSCREEN_TSC2003=y
# CONFIG_TOUCHSCREEN_USB_COMPOSITE is not set
+# CONFIG_TOUCHSCREEN_TOUCHIT213 is not set
+# CONFIG_TOUCHSCREEN_TSC2007 is not set
# CONFIG_INPUT_MISC is not set
#
@@ -691,6 +758,7 @@ CONFIG_TOUCHSCREEN_TSC2003=y
# Character devices
#
CONFIG_VT=y
+CONFIG_CONSOLE_TRANSLATIONS=y
CONFIG_VT_CONSOLE=y
CONFIG_HW_CONSOLE=y
# CONFIG_VT_HW_CONSOLE_BINDING is not set
@@ -715,16 +783,20 @@ CONFIG_SERIAL_8250_RSA=y
#
# Non-8250 serial port support
#
+# CONFIG_SERIAL_MAX3100 is not set
# CONFIG_SERIAL_UARTLITE is not set
CONFIG_SERIAL_CORE=y
CONFIG_SERIAL_CORE_CONSOLE=y
# CONFIG_SERIAL_JSM is not set
# CONFIG_SERIAL_OF_PLATFORM is not set
CONFIG_UNIX98_PTYS=y
+# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set
CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
+# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -734,44 +806,62 @@ CONFIG_DEVPORT=y
CONFIG_I2C=y
CONFIG_I2C_BOARDINFO=y
CONFIG_I2C_CHARDEV=y
+CONFIG_I2C_HELPER_AUTO=y
#
# I2C Hardware Bus support
#
+
+#
+# PC SMBus host controller drivers
+#
# CONFIG_I2C_ALI1535 is not set
# CONFIG_I2C_ALI1563 is not set
# CONFIG_I2C_ALI15X3 is not set
# CONFIG_I2C_AMD756 is not set
# CONFIG_I2C_AMD8111 is not set
# CONFIG_I2C_I801 is not set
-# CONFIG_I2C_I810 is not set
+# CONFIG_I2C_ISCH is not set
# CONFIG_I2C_PIIX4 is not set
-CONFIG_I2C_MPC=y
# CONFIG_I2C_NFORCE2 is not set
-# CONFIG_I2C_OCORES is not set
-# CONFIG_I2C_PARPORT_LIGHT is not set
-# CONFIG_I2C_PROSAVAGE is not set
-# CONFIG_I2C_SAVAGE4 is not set
-# CONFIG_I2C_SIMTEC is not set
# CONFIG_I2C_SIS5595 is not set
# CONFIG_I2C_SIS630 is not set
# CONFIG_I2C_SIS96X is not set
-# CONFIG_I2C_TAOS_EVM is not set
-# CONFIG_I2C_STUB is not set
-# CONFIG_I2C_TINY_USB is not set
# CONFIG_I2C_VIA is not set
# CONFIG_I2C_VIAPRO is not set
+
+#
+# I2C system bus drivers (mostly embedded / system-on-chip)
+#
+CONFIG_I2C_MPC=y
+# CONFIG_I2C_OCORES is not set
+# CONFIG_I2C_SIMTEC is not set
+
+#
+# External I2C/SMBus adapter drivers
+#
+# CONFIG_I2C_PARPORT_LIGHT is not set
+# CONFIG_I2C_TAOS_EVM is not set
+# CONFIG_I2C_TINY_USB is not set
+
+#
+# Graphics adapter I2C/DDC channel drivers
+#
# CONFIG_I2C_VOODOO3 is not set
+
+#
+# Other I2C/SMBus bus drivers
+#
# CONFIG_I2C_PCA_PLATFORM is not set
+# CONFIG_I2C_STUB is not set
#
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_SENSORS_EEPROM is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
-# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_PCA9539 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -785,33 +875,38 @@ CONFIG_SPI_MASTER=y
# SPI Master Controller Drivers
#
# CONFIG_SPI_BITBANG is not set
-CONFIG_SPI_SOCRATES=y
#
# SPI Protocol Masters
#
-# CONFIG_SPI_AT25 is not set
# CONFIG_SPI_SPIDEV is not set
# CONFIG_SPI_TLE62X0 is not set
+CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y
+# CONFIG_GPIOLIB is not set
# CONFIG_W1 is not set
# CONFIG_POWER_SUPPLY is not set
CONFIG_HWMON=y
CONFIG_HWMON_VID=y
+# CONFIG_SENSORS_AD7414 is not set
# CONFIG_SENSORS_AD7418 is not set
+# CONFIG_SENSORS_ADCXX is not set
# CONFIG_SENSORS_ADM1021 is not set
# CONFIG_SENSORS_ADM1025 is not set
# CONFIG_SENSORS_ADM1026 is not set
# CONFIG_SENSORS_ADM1029 is not set
# CONFIG_SENSORS_ADM1031 is not set
# CONFIG_SENSORS_ADM9240 is not set
+# CONFIG_SENSORS_ADT7462 is not set
# CONFIG_SENSORS_ADT7470 is not set
# CONFIG_SENSORS_ADT7473 is not set
+# CONFIG_SENSORS_ADT7475 is not set
# CONFIG_SENSORS_ATXP1 is not set
# CONFIG_SENSORS_DS1621 is not set
# CONFIG_SENSORS_I5K_AMB is not set
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -827,10 +922,15 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
+# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
+# CONFIG_SENSORS_MAX1111 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -849,22 +949,31 @@ CONFIG_SENSORS_W83781D=y
# CONFIG_SENSORS_W83L786NG is not set
# CONFIG_SENSORS_W83627HF is not set
# CONFIG_SENSORS_W83627EHF is not set
+# CONFIG_SENSORS_LIS3_SPI is not set
CONFIG_HWMON_DEBUG_CHIP=y
# CONFIG_THERMAL is not set
# CONFIG_THERMAL_HWMON is not set
# CONFIG_WATCHDOG is not set
+CONFIG_SSB_POSSIBLE=y
#
# Sonics Silicon Backplane
#
-CONFIG_SSB_POSSIBLE=y
# CONFIG_SSB is not set
#
# Multifunction device drivers
#
+# CONFIG_MFD_CORE is not set
# CONFIG_MFD_SM501 is not set
# CONFIG_HTC_PASIC3 is not set
+# CONFIG_TWL4030_CORE is not set
+# CONFIG_MFD_TMIO is not set
+# CONFIG_PMIC_DA903X is not set
+# CONFIG_MFD_WM8400 is not set
+# CONFIG_MFD_WM8350_I2C is not set
+# CONFIG_MFD_PCF50633 is not set
+# CONFIG_REGULATOR is not set
#
# Multimedia devices
@@ -893,6 +1002,7 @@ CONFIG_DAB=y
CONFIG_FB=y
# CONFIG_FIRMWARE_EDID is not set
# CONFIG_FB_DDC is not set
+# CONFIG_FB_BOOT_VESA_SUPPORT is not set
CONFIG_FB_CFB_FILLRECT=y
CONFIG_FB_CFB_COPYAREA=y
CONFIG_FB_CFB_IMAGEBLIT=y
@@ -914,10 +1024,6 @@ CONFIG_FB_BOTH_ENDIAN=y
#
# Frame buffer hardware drivers
#
-CONFIG_FB_MB862XX=y
-# CONFIG_FB_MB862XX_PCI_GDC is not set
-CONFIG_FB_MB862XX_LIME=y
-# CONFIG_FB_PRE_INIT_FB is not set
# CONFIG_FB_CIRRUS is not set
# CONFIG_FB_PM2 is not set
# CONFIG_FB_CYBER2000 is not set
@@ -936,6 +1042,7 @@ CONFIG_FB_MB862XX_LIME=y
# CONFIG_FB_S3 is not set
# CONFIG_FB_SAVAGE is not set
# CONFIG_FB_SIS is not set
+# CONFIG_FB_VIA is not set
# CONFIG_FB_NEOMAGIC is not set
# CONFIG_FB_KYRO is not set
# CONFIG_FB_3DFX is not set
@@ -944,9 +1051,16 @@ CONFIG_FB_MB862XX_LIME=y
# CONFIG_FB_TRIDENT is not set
# CONFIG_FB_ARK is not set
# CONFIG_FB_PM3 is not set
+# CONFIG_FB_CARMINE is not set
# CONFIG_FB_FSL_DIU is not set
# CONFIG_FB_IBM_GXT4500 is not set
# CONFIG_FB_VIRTUAL is not set
+# CONFIG_FB_METRONOME is not set
+CONFIG_FB_MB862XX=y
+# CONFIG_FB_MB862XX_PCI_GDC is not set
+CONFIG_FB_MB862XX_LIME=y
+# CONFIG_FB_PRE_INIT_FB is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -974,10 +1088,6 @@ CONFIG_FONT_8x16=y
# CONFIG_FONT_SUN12x22 is not set
# CONFIG_FONT_10x18 is not set
# CONFIG_LOGO is not set
-
-#
-# Sound
-#
# CONFIG_SOUND is not set
CONFIG_HID_SUPPORT=y
CONFIG_HID=y
@@ -988,9 +1098,36 @@ CONFIG_HID=y
# USB Input Devices
#
CONFIG_USB_HID=y
-# CONFIG_USB_HIDINPUT_POWERBOOK is not set
-# CONFIG_HID_FF is not set
+# CONFIG_HID_PID is not set
# CONFIG_USB_HIDDEV is not set
+
+#
+# Special HID drivers
+#
+# CONFIG_HID_A4TECH is not set
+# CONFIG_HID_APPLE is not set
+# CONFIG_HID_BELKIN is not set
+# CONFIG_HID_CHERRY is not set
+# CONFIG_HID_CHICONY is not set
+# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
+# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
+# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
+# CONFIG_HID_LOGITECH is not set
+# CONFIG_HID_MICROSOFT is not set
+# CONFIG_HID_MONTEREY is not set
+# CONFIG_HID_NTRIG is not set
+# CONFIG_HID_PANTHERLORD is not set
+# CONFIG_HID_PETALYNX is not set
+# CONFIG_HID_SAMSUNG is not set
+# CONFIG_HID_SONY is not set
+# CONFIG_HID_SUNPLUS is not set
+# CONFIG_GREENASIA_FF is not set
+# CONFIG_HID_TOPSEED is not set
+# CONFIG_THRUSTMASTER_FF is not set
+# CONFIG_ZEROPLUS_FF is not set
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1008,6 +1145,9 @@ CONFIG_USB_DEVICE_CLASS=y
# CONFIG_USB_OTG is not set
# CONFIG_USB_OTG_WHITELIST is not set
# CONFIG_USB_OTG_BLACKLIST_HUB is not set
+CONFIG_USB_MON=y
+# CONFIG_USB_WUSB is not set
+# CONFIG_USB_WUSB_CBAF is not set
#
# USB Host Controller Drivers
@@ -1018,6 +1158,7 @@ CONFIG_USB_EHCI_HCD=y
# CONFIG_USB_EHCI_TT_NEWSCHED is not set
# CONFIG_USB_EHCI_FSL is not set
CONFIG_USB_EHCI_HCD_PPC_OF=y
+# CONFIG_USB_OXU210HP_HCD is not set
# CONFIG_USB_ISP116X_HCD is not set
# CONFIG_USB_ISP1760_HCD is not set
CONFIG_USB_OHCI_HCD=y
@@ -1031,6 +1172,8 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_UHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
+# CONFIG_USB_WHCI_HCD is not set
+# CONFIG_USB_HWA_HCD is not set
#
# USB Device Class drivers
@@ -1038,20 +1181,20 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_ACM is not set
# CONFIG_USB_PRINTER is not set
# CONFIG_USB_WDM is not set
+# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support'
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# may also be needed; see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
# CONFIG_USB_STORAGE_DATAFAB is not set
# CONFIG_USB_STORAGE_FREECOM is not set
# CONFIG_USB_STORAGE_ISD200 is not set
-# CONFIG_USB_STORAGE_DPCM is not set
# CONFIG_USB_STORAGE_USBAT is not set
# CONFIG_USB_STORAGE_SDDR09 is not set
# CONFIG_USB_STORAGE_SDDR55 is not set
@@ -1067,7 +1210,6 @@ CONFIG_USB_STORAGE=y
#
# CONFIG_USB_MDC800 is not set
# CONFIG_USB_MICROTEK is not set
-CONFIG_USB_MON=y
#
# USB port drivers
@@ -1080,7 +1222,7 @@ CONFIG_USB_MON=y
# CONFIG_USB_EMI62 is not set
# CONFIG_USB_EMI26 is not set
# CONFIG_USB_ADUTUX is not set
-# CONFIG_USB_AUERSWALD is not set
+# CONFIG_USB_SEVSEG is not set
# CONFIG_USB_RIO500 is not set
# CONFIG_USB_LEGOTOWER is not set
# CONFIG_USB_LCD is not set
@@ -1088,7 +1230,6 @@ CONFIG_USB_MON=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1098,7 +1239,14 @@ CONFIG_USB_MON=y
# CONFIG_USB_IOWARRIOR is not set
# CONFIG_USB_TEST is not set
# CONFIG_USB_ISIGHTFW is not set
+# CONFIG_USB_VST is not set
# CONFIG_USB_GADGET is not set
+
+#
+# OTG and related infrastructure
+#
+# CONFIG_NOP_USB_XCEIV is not set
+# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
@@ -1135,33 +1283,42 @@ CONFIG_RTC_INTF_DEV=y
# CONFIG_RTC_DRV_M41T80 is not set
# CONFIG_RTC_DRV_S35390A is not set
# CONFIG_RTC_DRV_FM3130 is not set
-CONFIG_RTC_DRV_RX8025=y
+# CONFIG_RTC_DRV_RX8581 is not set
#
# SPI RTC drivers
#
+# CONFIG_RTC_DRV_M41T94 is not set
+# CONFIG_RTC_DRV_DS1305 is not set
+# CONFIG_RTC_DRV_DS1390 is not set
# CONFIG_RTC_DRV_MAX6902 is not set
# CONFIG_RTC_DRV_R9701 is not set
# CONFIG_RTC_DRV_RS5C348 is not set
+# CONFIG_RTC_DRV_DS3234 is not set
#
# Platform RTC drivers
#
# CONFIG_RTC_DRV_CMOS is not set
+# CONFIG_RTC_DRV_DS1286 is not set
# CONFIG_RTC_DRV_DS1511 is not set
# CONFIG_RTC_DRV_DS1553 is not set
# CONFIG_RTC_DRV_DS1742 is not set
# CONFIG_RTC_DRV_STK17TA8 is not set
# CONFIG_RTC_DRV_M48T86 is not set
+# CONFIG_RTC_DRV_M48T35 is not set
# CONFIG_RTC_DRV_M48T59 is not set
+# CONFIG_RTC_DRV_BQ4802 is not set
# CONFIG_RTC_DRV_V3020 is not set
#
# on-CPU RTC drivers
#
-CONFIG_RTC_DRV_PPC=y
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
+# CONFIG_STAGING is not set
#
# File systems
@@ -1170,17 +1327,20 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
-# CONFIG_EXT4DEV_FS is not set
+# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
CONFIG_FS_MBCACHE=y
# CONFIG_REISERFS_FS is not set
# CONFIG_JFS_FS is not set
# CONFIG_FS_POSIX_ACL is not set
+CONFIG_FILE_LOCKING=y
# CONFIG_XFS_FS is not set
# CONFIG_OCFS2_FS is not set
+# CONFIG_BTRFS_FS is not set
CONFIG_DNOTIFY=y
CONFIG_INOTIFY=y
CONFIG_INOTIFY_USER=y
@@ -1190,6 +1350,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1208,15 +1373,13 @@ CONFIG_INOTIFY_USER=y
CONFIG_PROC_FS=y
CONFIG_PROC_KCORE=y
CONFIG_PROC_SYSCTL=y
+CONFIG_PROC_PAGE_MONITOR=y
CONFIG_SYSFS=y
CONFIG_TMPFS=y
# CONFIG_TMPFS_POSIX_ACL is not set
# CONFIG_HUGETLB_PAGE is not set
# CONFIG_CONFIGFS_FS is not set
-
-#
-# Miscellaneous filesystems
-#
+CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ADFS_FS is not set
# CONFIG_AFFS_FS is not set
# CONFIG_HFS_FS is not set
@@ -1236,25 +1399,27 @@ CONFIG_JFFS2_ZLIB=y
CONFIG_JFFS2_RTIME=y
# CONFIG_JFFS2_RUBIN is not set
CONFIG_CRAMFS=y
+# CONFIG_SQUASHFS is not set
# CONFIG_VXFS_FS is not set
# CONFIG_MINIX_FS is not set
+# CONFIG_OMFS_FS is not set
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
# CONFIG_NFS_V3_ACL is not set
# CONFIG_NFS_V4 is not set
-# CONFIG_NFSD is not set
CONFIG_ROOT_NFS=y
+# CONFIG_NFSD is not set
CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_BIND34 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1286,25 +1451,28 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
#
CONFIG_BITREVERSE=y
-# CONFIG_GENERIC_FIND_FIRST_BIT is not set
+CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC_CCITT is not set
# CONFIG_CRC16 is not set
+# CONFIG_CRC_T10DIF is not set
# CONFIG_CRC_ITU_T is not set
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1321,7 +1489,32 @@ CONFIG_FRAME_WARN=1024
# CONFIG_SLUB_DEBUG_ON is not set
# CONFIG_SLUB_STATS is not set
# CONFIG_DEBUG_BUGVERBOSE is not set
+# CONFIG_DEBUG_MEMORY_INIT is not set
+# CONFIG_RCU_CPU_STALL_DETECTOR is not set
+# CONFIG_LATENCYTOP is not set
+CONFIG_SYSCTL_SYSCALL_CHECK=y
+CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
+CONFIG_HAVE_DYNAMIC_FTRACE=y
+CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
+
+#
+# Tracers
+#
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
+CONFIG_HAVE_ARCH_KGDB=y
+CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_IRQSTACKS is not set
# CONFIG_PPC_EARLY_DEBUG is not set
@@ -1330,13 +1523,16 @@ CONFIG_FRAME_WARN=1024
#
# CONFIG_KEYS is not set
# CONFIG_SECURITY is not set
+# CONFIG_SECURITYFS is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_CRYPTO=y
#
# Crypto core or helper
#
+# CONFIG_CRYPTO_FIPS is not set
# CONFIG_CRYPTO_MANAGER is not set
+# CONFIG_CRYPTO_MANAGER2 is not set
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
# CONFIG_CRYPTO_CRYPTD is not set
@@ -1374,6 +1570,10 @@ CONFIG_CRYPTO=y
# CONFIG_CRYPTO_MD4 is not set
# CONFIG_CRYPTO_MD5 is not set
# CONFIG_CRYPTO_MICHAEL_MIC is not set
+# CONFIG_CRYPTO_RMD128 is not set
+# CONFIG_CRYPTO_RMD160 is not set
+# CONFIG_CRYPTO_RMD256 is not set
+# CONFIG_CRYPTO_RMD320 is not set
# CONFIG_CRYPTO_SHA1 is not set
# CONFIG_CRYPTO_SHA256 is not set
# CONFIG_CRYPTO_SHA512 is not set
@@ -1403,8 +1603,15 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
+
+#
+# Random Number Generation
+#
+# CONFIG_CRYPTO_ANSI_CPRNG is not set
CONFIG_CRYPTO_HW=y
# CONFIG_CRYPTO_DEV_HIFN_795X is not set
+# CONFIG_CRYPTO_DEV_TALITOS is not set
# CONFIG_PPC_CLOCK is not set
# CONFIG_VIRTUALIZATION is not set
diff --git a/arch/powerpc/configs/85xx/stx_gp3_defconfig b/arch/powerpc/configs/85xx/stx_gp3_defconfig
index eb4ba7a5f41..bd1bfcddbd0 100644
--- a/arch/powerpc/configs/85xx/stx_gp3_defconfig
+++ b/arch/powerpc/configs/85xx/stx_gp3_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:18 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:22 2009
#
# CONFIG_PPC64 is not set
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -90,21 +101,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -114,10 +128,12 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -126,6 +142,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -137,7 +154,6 @@ CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -153,11 +169,6 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -173,6 +184,7 @@ CONFIG_MPC85xx=y
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
CONFIG_STX_GP3=y
# CONFIG_TQM8540 is not set
@@ -241,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -269,6 +284,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -282,17 +298,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -353,6 +369,7 @@ CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -389,6 +406,7 @@ CONFIG_IP_NF_FILTER=m
# CONFIG_IP_NF_TARGET_LOG is not set
# CONFIG_IP_NF_TARGET_ULOG is not set
# CONFIG_IP_NF_MANGLE is not set
+# CONFIG_IP_NF_TARGET_TTL is not set
# CONFIG_IP_NF_RAW is not set
# CONFIG_IP_NF_ARPTABLES is not set
# CONFIG_IP_DCCP is not set
@@ -406,6 +424,7 @@ CONFIG_IP_NF_FILTER=m
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -418,7 +437,6 @@ CONFIG_NET_PKTGEN=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -476,13 +494,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
@@ -591,9 +616,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -617,6 +644,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -633,6 +661,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -666,6 +695,8 @@ CONFIG_NET_ETHERNET=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -687,6 +718,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -697,10 +729,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -710,6 +744,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -719,6 +754,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -726,7 +762,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -778,7 +813,6 @@ CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -837,6 +871,7 @@ CONFIG_PRINTER=m
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
@@ -903,12 +938,9 @@ CONFIG_I2C_ALGOBIT=m
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -964,6 +996,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -978,11 +1011,15 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -1075,7 +1112,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1089,7 +1125,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -1116,6 +1152,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1138,6 +1175,11 @@ CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
@@ -1186,6 +1228,7 @@ CONFIG_CRAMFS=m
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1197,7 +1240,6 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -1253,6 +1295,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1266,12 +1309,13 @@ CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1289,6 +1333,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1319,9 +1366,12 @@ CONFIG_SCHED_DEBUG=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1329,17 +1379,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1433,6 +1485,7 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/85xx/tqm8540_defconfig b/arch/powerpc/configs/85xx/tqm8540_defconfig
index f4379b1cf84..767600145fb 100644
--- a/arch/powerpc/configs/85xx/tqm8540_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8540_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:19 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:23 2009
#
# CONFIG_PPC64 is not set
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -89,19 +100,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -111,16 +125,19 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -128,7 +145,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -144,11 +160,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -164,6 +175,7 @@ CONFIG_MPC85xx=y
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
CONFIG_TQM8540=y
@@ -232,9 +244,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
@@ -259,6 +274,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
#
@@ -270,17 +286,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -336,6 +352,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -348,7 +365,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -448,7 +464,6 @@ CONFIG_MTD_CFI_UTIL=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -477,19 +492,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
@@ -564,6 +587,7 @@ CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -597,6 +621,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -634,6 +660,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -644,10 +671,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -657,6 +686,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -666,6 +696,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -673,7 +704,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -754,6 +784,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
@@ -816,12 +847,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -853,6 +881,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -867,11 +896,14 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -955,7 +987,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -969,7 +1000,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -985,6 +1016,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -995,6 +1027,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1017,6 +1050,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1070,6 +1108,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
@@ -1079,7 +1118,6 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1107,6 +1145,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1122,11 +1161,12 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1148,13 +1188,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -1245,6 +1296,7 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/85xx/tqm8541_defconfig b/arch/powerpc/configs/85xx/tqm8541_defconfig
index b8669231c1f..52fafc006dd 100644
--- a/arch/powerpc/configs/85xx/tqm8541_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8541_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:20 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:23 2009
#
# CONFIG_PPC64 is not set
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -112,10 +126,12 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -166,6 +177,7 @@ CONFIG_MPC85xx=y
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
@@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
#
@@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
@@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -601,6 +625,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
@@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -885,6 +913,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -988,7 +1021,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1050,6 +1084,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
@@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1155,11 +1195,12 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/85xx/tqm8548_defconfig b/arch/powerpc/configs/85xx/tqm8548_defconfig
index 43030fea2ee..8b4faae7a9a 100644
--- a/arch/powerpc/configs/85xx/tqm8548_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8548_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc7
-# Mon Mar 16 09:03:28 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:24 2009
#
# CONFIG_PPC64 is not set
@@ -59,6 +59,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -99,21 +100,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -123,10 +127,12 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -134,6 +140,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -146,7 +153,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -177,6 +183,7 @@ CONFIG_MPC85xx=y
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
@@ -246,6 +253,8 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
@@ -278,6 +287,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -302,7 +312,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -358,6 +367,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -370,7 +380,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
# CONFIG_RFKILL is not set
@@ -514,6 +523,7 @@ CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
@@ -548,6 +558,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -581,6 +592,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -600,6 +613,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -610,6 +624,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
@@ -624,6 +639,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -633,6 +649,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -640,7 +657,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -785,7 +801,6 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -817,6 +832,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -831,11 +847,14 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -919,7 +938,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
# CONFIG_USB_SUPPORT is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
@@ -982,8 +1000,9 @@ CONFIG_RTC_DRV_DS1307=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1009,6 +1028,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1062,6 +1086,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
@@ -1071,7 +1096,6 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1099,6 +1123,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1114,11 +1139,12 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1136,6 +1162,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1166,10 +1195,12 @@ CONFIG_DEBUG_MUTEXES=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1177,17 +1208,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1281,6 +1314,7 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/85xx/tqm8555_defconfig b/arch/powerpc/configs/85xx/tqm8555_defconfig
index d5a864d7446..170360934ce 100644
--- a/arch/powerpc/configs/85xx/tqm8555_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8555_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:21 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:25 2009
#
# CONFIG_PPC64 is not set
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -112,10 +126,12 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -166,6 +177,7 @@ CONFIG_MPC85xx=y
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
@@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
#
@@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
@@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -601,6 +625,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
@@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -885,6 +913,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -988,7 +1021,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1050,6 +1084,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
@@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1155,11 +1195,12 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/85xx/tqm8560_defconfig b/arch/powerpc/configs/85xx/tqm8560_defconfig
index a25009174f3..f41cc2444d4 100644
--- a/arch/powerpc/configs/85xx/tqm8560_defconfig
+++ b/arch/powerpc/configs/85xx/tqm8560_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:22 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:26 2009
#
# CONFIG_PPC64 is not set
@@ -22,6 +22,7 @@ CONFIG_FSL_EMB_PERFMON=y
# CONFIG_PHYS_64BIT is not set
CONFIG_SPE=y
CONFIG_PPC_MMU_NOHASH=y
+CONFIG_PPC_BOOK3E_MMU=y
# CONFIG_PPC_MM_SLICES is not set
# CONFIG_SMP is not set
CONFIG_PPC32=y
@@ -59,6 +60,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -76,6 +78,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -90,19 +101,22 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -112,10 +126,12 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -123,6 +139,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -130,7 +147,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -146,11 +162,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -166,6 +177,7 @@ CONFIG_MPC85xx=y
# CONFIG_MPC85xx_MDS is not set
# CONFIG_MPC8536_DS is not set
# CONFIG_MPC85xx_DS is not set
+# CONFIG_SOCRATES is not set
# CONFIG_KSI8560 is not set
# CONFIG_STX_GP3 is not set
# CONFIG_TQM8540 is not set
@@ -235,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +277,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_HAS_RAPIDIO is not set
#
@@ -273,17 +289,17 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
+CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
-CONFIG_PHYSICAL_ALIGN=0x10000000
+CONFIG_PHYSICAL_ALIGN=0x04000000
CONFIG_TASK_SIZE=0xc0000000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -339,6 +355,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -351,7 +368,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -451,7 +467,6 @@ CONFIG_MTD_CFI_UTIL=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -481,19 +496,27 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
@@ -568,6 +591,7 @@ CONFIG_BLK_DEV_IDEDMA=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -601,6 +625,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -639,6 +665,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -649,10 +676,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -662,6 +691,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -671,6 +701,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -678,7 +709,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -761,6 +791,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
@@ -825,12 +856,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -885,6 +913,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -899,11 +928,15 @@ CONFIG_SENSORS_LM75=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -988,7 +1021,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1002,7 +1034,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -1018,6 +1050,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1028,6 +1061,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1050,6 +1084,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1103,6 +1142,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
@@ -1112,7 +1152,6 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1140,6 +1179,7 @@ CONFIG_PARTITION_ADVANCED=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1155,11 +1195,12 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1181,13 +1222,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -1278,6 +1330,7 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
index df2c1633779..b6a23af57f4 100644
--- a/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
+++ b/arch/powerpc/configs/86xx/gef_ppc9a_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc7
-# Fri Mar 13 15:36:11 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:31 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -72,6 +74,7 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
@@ -100,21 +103,24 @@ CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -123,10 +129,12 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -135,6 +143,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -148,7 +157,6 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -169,8 +177,6 @@ CONFIG_DEFAULT_IOSCHED="cfq"
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -189,6 +195,7 @@ CONFIG_GEF_PPC9A=y
# CONFIG_GEF_SBC310 is not set
# CONFIG_GEF_SBC610 is not set
CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -250,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
@@ -281,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -303,7 +314,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -383,9 +393,11 @@ CONFIG_BRIDGE_NETFILTER=y
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -398,6 +410,7 @@ CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -456,11 +469,11 @@ CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
@@ -495,6 +508,7 @@ CONFIG_LLC=m
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
@@ -545,7 +559,6 @@ CONFIG_NET_PKTGEN=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
@@ -686,6 +699,7 @@ CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
@@ -751,9 +765,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -776,6 +792,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -852,6 +869,7 @@ CONFIG_SATA_SIL=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
@@ -885,6 +903,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -904,6 +924,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -914,8 +935,8 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -929,7 +950,6 @@ CONFIG_GIANFAR=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1056,6 +1076,7 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -1122,7 +1143,6 @@ CONFIG_DS1682=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -1178,6 +1198,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -1192,11 +1213,15 @@ CONFIG_HWMON=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -1315,15 +1340,17 @@ CONFIG_USB_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1393,11 +1420,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1439,7 +1466,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1456,6 +1482,7 @@ CONFIG_USB_STORAGE=y
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1517,8 +1544,9 @@ CONFIG_RTC_DRV_RX8581=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1531,6 +1559,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1553,6 +1582,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1609,6 +1643,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1621,7 +1656,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1682,6 +1716,7 @@ CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1697,11 +1732,12 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1719,6 +1755,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1747,9 +1786,12 @@ CONFIG_DEBUG_INFO=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1758,17 +1800,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1790,6 +1834,7 @@ CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
#
@@ -1805,10 +1850,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
@@ -1878,6 +1925,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/86xx/gef_sbc310_defconfig b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
index bd236b3d915..a66910e6334 100644
--- a/arch/powerpc/configs/86xx/gef_sbc310_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc310_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc3
-# Wed Jan 28 23:05:34 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:29 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -72,6 +74,7 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
@@ -96,20 +99,23 @@ CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -118,10 +124,12 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -130,6 +138,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -143,7 +152,6 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -165,8 +173,6 @@ CONFIG_PPC_MSI_BITMAP=y
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -181,9 +187,11 @@ CONFIG_PPC_86xx=y
# CONFIG_MPC8641_HPCN is not set
# CONFIG_SBC8641D is not set
# CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
CONFIG_GEF_SBC310=y
# CONFIG_GEF_SBC610 is not set
CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -245,9 +253,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
@@ -275,6 +286,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -288,7 +300,6 @@ CONFIG_PCI_MSI=y
# Default settings for advanced configuration options are used
#
CONFIG_LOWMEM_SIZE=0x30000000
-CONFIG_LOWMEM_CAM_NUM=3
CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
@@ -298,7 +309,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -382,6 +392,7 @@ CONFIG_IPV6_TUNNEL=m
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -394,7 +405,6 @@ CONFIG_NET_PKTGEN=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
# CONFIG_WIRELESS is not set
# CONFIG_WIMAX is not set
@@ -493,7 +503,6 @@ CONFIG_MTD_PHYSMAP_OF=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -529,6 +538,7 @@ CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
@@ -594,9 +604,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -619,6 +631,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -641,6 +654,7 @@ CONFIG_SATA_SIL24=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
@@ -674,6 +688,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -693,6 +709,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -703,11 +720,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -717,7 +735,6 @@ CONFIG_GIANFAR=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -828,6 +845,7 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -894,7 +912,6 @@ CONFIG_DS1682=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -949,6 +966,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -963,11 +981,15 @@ CONFIG_HWMON=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -1086,15 +1108,17 @@ CONFIG_USB_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1164,11 +1188,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1210,7 +1234,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1226,6 +1249,7 @@ CONFIG_USB_STORAGE=y
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1287,8 +1311,9 @@ CONFIG_RTC_DRV_RX8581=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1301,6 +1326,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1323,6 +1349,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=y
@@ -1382,6 +1413,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1394,7 +1426,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1455,6 +1486,7 @@ CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1470,11 +1502,12 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=y
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1494,13 +1527,25 @@ CONFIG_MAGIC_SYSRQ=y
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_PREEMPT_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -1530,10 +1575,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
@@ -1602,6 +1649,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/86xx/gef_sbc610_defconfig b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
index 1ab5abae00a..c6a7fc82b69 100644
--- a/arch/powerpc/configs/86xx/gef_sbc610_defconfig
+++ b/arch/powerpc/configs/86xx/gef_sbc610_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:26 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:30 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
@@ -58,6 +59,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -72,10 +74,20 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -91,21 +103,24 @@ CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -114,10 +129,12 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -126,6 +143,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -139,7 +157,6 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -155,18 +172,11 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -181,8 +191,11 @@ CONFIG_PPC_86xx=y
# CONFIG_MPC8641_HPCN is not set
# CONFIG_SBC8641D is not set
# CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
CONFIG_GEF_SBC610=y
CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -244,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
@@ -275,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HAS_RAPIDIO=y
@@ -298,7 +315,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -378,9 +394,11 @@ CONFIG_BRIDGE_NETFILTER=y
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -393,6 +411,7 @@ CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -451,11 +470,11 @@ CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
@@ -490,6 +509,7 @@ CONFIG_LLC=m
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
@@ -540,7 +560,6 @@ CONFIG_NET_PKTGEN=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
@@ -651,7 +670,6 @@ CONFIG_MTD_PHYSMAP_OF=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -682,13 +700,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -746,9 +771,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -771,6 +798,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -847,6 +875,7 @@ CONFIG_SATA_SIL=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
@@ -880,6 +909,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -899,6 +930,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -909,11 +941,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -923,7 +956,6 @@ CONFIG_GIANFAR=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1050,6 +1082,7 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -1113,12 +1146,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
CONFIG_DS1682=y
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -1174,6 +1204,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -1188,11 +1219,15 @@ CONFIG_HWMON=y
CONFIG_SENSORS_LM90=y
CONFIG_SENSORS_LM92=y
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -1311,15 +1346,17 @@ CONFIG_USB_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1389,11 +1426,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1435,7 +1472,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1452,6 +1488,7 @@ CONFIG_USB_STORAGE=y
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1513,8 +1550,9 @@ CONFIG_RTC_DRV_RX8581=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1527,6 +1565,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1549,6 +1588,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1595,6 +1639,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1607,7 +1652,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1668,6 +1712,7 @@ CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1681,13 +1726,14 @@ CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1705,6 +1751,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1733,9 +1782,12 @@ CONFIG_DEBUG_INFO=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1744,17 +1796,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1776,6 +1830,7 @@ CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
# CONFIG_SECURITY_ROOTPLUG is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
#
@@ -1791,10 +1846,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
@@ -1864,6 +1921,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
index bbdf4bfc432..cfd2efcc6bc 100644
--- a/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8610_hpcd_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:24 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:28 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
@@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -72,6 +74,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -87,21 +98,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -111,10 +125,12 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -122,6 +138,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -134,7 +151,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -150,18 +166,11 @@ CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -176,9 +185,13 @@ CONFIG_PPC_86xx=y
# CONFIG_MPC8641_HPCN is not set
# CONFIG_SBC8641D is not set
CONFIG_MPC8610_HPCD=y
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
# CONFIG_GEF_SBC610 is not set
CONFIG_MPC8610=y
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -238,9 +251,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=12
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -269,6 +285,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
CONFIG_PCI_DEBUG=y
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -291,7 +308,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -364,6 +380,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -376,7 +393,6 @@ CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -492,7 +508,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -521,13 +536,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
@@ -632,9 +654,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -657,6 +681,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -733,6 +758,7 @@ CONFIG_PATA_ALI=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -747,6 +773,8 @@ CONFIG_NET_ETHERNET=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
# CONFIG_TULIP is not set
@@ -774,7 +802,6 @@ CONFIG_ULI526X=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -929,12 +956,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -1049,6 +1073,7 @@ CONFIG_FB_FSL_DIU=y
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -1069,6 +1094,7 @@ CONFIG_SOUND_OSS_CORE=y
CONFIG_SND=y
CONFIG_SND_TIMER=y
CONFIG_SND_PCM=y
+CONFIG_SND_JACK=y
# CONFIG_SND_SEQUENCER is not set
CONFIG_SND_OSSEMUL=y
CONFIG_SND_MIXER_OSS=y
@@ -1116,6 +1142,8 @@ CONFIG_SND_PCI=y
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
@@ -1165,7 +1193,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1179,7 +1206,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -1247,8 +1274,9 @@ CONFIG_RTC_DRV_CMOS=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1259,6 +1287,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1280,6 +1309,11 @@ CONFIG_FILE_LOCKING=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1323,6 +1357,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1337,7 +1372,6 @@ CONFIG_LOCKD_V4=y
CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1409,6 +1443,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1422,11 +1457,13 @@ CONFIG_CRC_T10DIF=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1444,6 +1481,9 @@ CONFIG_DEBUG_SHIRQ=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1474,9 +1514,12 @@ CONFIG_DEBUG_INFO=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1484,17 +1527,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1589,6 +1634,7 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
index 92acfdf3540..0bee3e30394 100644
--- a/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
+++ b/arch/powerpc/configs/86xx/mpc8641_hpcn_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:25 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:28 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
@@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -70,11 +72,21 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -90,22 +102,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -115,10 +129,12 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -127,6 +143,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -140,7 +157,6 @@ CONFIG_MODVERSIONS=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -156,18 +172,11 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -182,8 +191,11 @@ CONFIG_PPC_86xx=y
CONFIG_MPC8641_HPCN=y
# CONFIG_SBC8641D is not set
# CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
# CONFIG_GEF_SBC610 is not set
CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -245,9 +257,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -274,6 +289,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HAS_RAPIDIO=y
@@ -297,7 +313,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -385,6 +400,7 @@ CONFIG_SCTP_HMAC_MD5=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -397,7 +413,6 @@ CONFIG_SCTP_HMAC_MD5=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
@@ -451,13 +466,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -516,9 +538,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -541,6 +565,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -617,6 +642,7 @@ CONFIG_PATA_ALI=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -650,6 +676,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -669,6 +697,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -679,11 +708,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -693,6 +723,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -702,6 +733,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -709,7 +741,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -875,12 +906,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -933,7 +961,7 @@ CONFIG_VIDEO_MEDIA=m
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
@@ -942,6 +970,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
@@ -981,103 +1010,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported DVB Frontends
#
-
-#
-# Customise DVB Frontends
-#
# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -1157,6 +1090,8 @@ CONFIG_SND_PCI=y
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
@@ -1211,15 +1146,17 @@ CONFIG_USB_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1292,11 +1229,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1338,7 +1275,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1354,6 +1290,7 @@ CONFIG_USB_STORAGE=y
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1415,8 +1352,9 @@ CONFIG_RTC_DRV_CMOS=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1427,6 +1365,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1450,6 +1389,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
@@ -1504,6 +1448,7 @@ CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1519,7 +1464,6 @@ CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1590,6 +1534,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1604,11 +1549,12 @@ CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1626,6 +1572,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1656,9 +1605,12 @@ CONFIG_DEBUG_INFO=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1666,17 +1618,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1707,10 +1661,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1779,6 +1735,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/86xx/sbc8641d_defconfig b/arch/powerpc/configs/86xx/sbc8641d_defconfig
index 04797e730c5..c30a0c71587 100644
--- a/arch/powerpc/configs/86xx/sbc8641d_defconfig
+++ b/arch/powerpc/configs/86xx/sbc8641d_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:36:23 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:27 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
@@ -57,6 +58,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -71,10 +73,20 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
CONFIG_BSD_PROCESS_ACCT_V3=y
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -90,21 +102,24 @@ CONFIG_RELAY=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -113,10 +128,12 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -125,6 +142,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -138,7 +156,6 @@ CONFIG_MODULE_UNLOAD=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -154,18 +171,11 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -180,8 +190,11 @@ CONFIG_PPC_86xx=y
# CONFIG_MPC8641_HPCN is not set
CONFIG_SBC8641D=y
# CONFIG_MPC8610_HPCD is not set
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
# CONFIG_GEF_SBC610 is not set
CONFIG_MPC8641=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -243,9 +256,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
@@ -274,6 +290,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -296,7 +313,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -376,9 +392,11 @@ CONFIG_BRIDGE_NETFILTER=y
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -391,6 +409,7 @@ CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -449,11 +468,11 @@ CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
# CONFIG_BRIDGE_NF_EBTABLES is not set
@@ -488,6 +507,7 @@ CONFIG_LLC=m
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
CONFIG_WAN_ROUTER=m
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
@@ -538,7 +558,6 @@ CONFIG_NET_PKTGEN=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
@@ -649,7 +668,6 @@ CONFIG_MTD_PHYSMAP_OF=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -678,13 +696,20 @@ CONFIG_BLK_DEV_RAM_SIZE=4096
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -729,6 +754,7 @@ CONFIG_DM_ZERO=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
@@ -762,6 +788,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -781,6 +809,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -791,11 +820,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -805,7 +835,6 @@ CONFIG_GIANFAR=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -923,6 +952,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
@@ -985,12 +1015,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -1022,6 +1049,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -1036,11 +1064,14 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -1145,7 +1176,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1159,7 +1189,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -1175,6 +1205,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1187,6 +1218,7 @@ CONFIG_EXT2_FS_POSIX_ACL=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1228,6 +1260,11 @@ CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1269,8 +1306,13 @@ CONFIG_MINIX_FS=m
# CONFIG_HPFS_FS is not set
# CONFIG_QNX4FS_FS is not set
CONFIG_ROMFS_FS=m
+CONFIG_ROMFS_BACKED_BY_BLOCK=y
+# CONFIG_ROMFS_BACKED_BY_MTD is not set
+# CONFIG_ROMFS_BACKED_BY_BOTH is not set
+CONFIG_ROMFS_ON_BLOCK=y
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1283,7 +1325,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
CONFIG_SMB_FS=m
@@ -1346,6 +1387,7 @@ CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1359,13 +1401,14 @@ CONFIG_CRC_CCITT=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1383,6 +1426,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1411,9 +1457,12 @@ CONFIG_DEBUG_INFO=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1422,17 +1471,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_PREEMPT_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1454,6 +1506,7 @@ CONFIG_SECURITY_NETWORK=y
# CONFIG_SECURITY_PATH is not set
# CONFIG_SECURITY_FILE_CAPABILITIES is not set
CONFIG_SECURITY_DEFAULT_MMAP_MIN_ADDR=0
+# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
#
@@ -1469,10 +1522,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
CONFIG_CRYPTO_TEST=m
@@ -1542,6 +1597,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/adder875_defconfig b/arch/powerpc/configs/adder875_defconfig
index aaab5cc3751..74f7f7c6fdc 100644
--- a/arch/powerpc/configs/adder875_defconfig
+++ b/arch/powerpc/configs/adder875_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:24 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:50 2009
#
# CONFIG_PPC64 is not set
@@ -53,6 +53,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_REDBOOT=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -70,6 +71,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -85,19 +95,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -106,10 +116,12 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -117,13 +129,13 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -139,11 +151,6 @@ CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -233,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
@@ -270,14 +280,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -328,6 +335,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -340,7 +348,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -439,7 +446,6 @@ CONFIG_MTD_PHYSMAP_OF=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -463,6 +469,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -491,6 +498,8 @@ CONFIG_DAVICOM_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -511,7 +520,6 @@ CONFIG_FS_ENET_MDIO_FEC=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -558,7 +566,6 @@ CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -606,6 +613,7 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
@@ -675,6 +683,7 @@ CONFIG_VIDEO_OUTPUT_CONTROL=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -699,6 +708,11 @@ CONFIG_FILE_LOCKING=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -742,6 +756,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -753,7 +768,6 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -785,6 +799,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -802,6 +817,7 @@ CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -819,6 +835,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -845,9 +864,12 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -855,17 +877,20 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/c2k_defconfig b/arch/powerpc/configs/c2k_defconfig
index 5103319a7f5..9ffa8de9280 100644
--- a/arch/powerpc/configs/c2k_defconfig
+++ b/arch/powerpc/configs/c2k_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:26 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:51 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
@@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -70,12 +72,22 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
CONFIG_AUDITSYSCALL=y
CONFIG_AUDIT_TREE=y
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_GROUP_SCHED=y
@@ -92,23 +104,27 @@ CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -118,6 +134,7 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
@@ -133,6 +150,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -145,7 +163,6 @@ CONFIG_MODVERSIONS=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -161,18 +178,11 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -192,6 +202,8 @@ CONFIG_EMBEDDED6xx=y
# CONFIG_PPC_PRPMC2800 is not set
CONFIG_PPC_C2K=y
CONFIG_MV64X60=y
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -268,9 +280,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
@@ -295,6 +310,7 @@ CONFIG_PCI_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
CONFIG_HOTPLUG_PCI=y
# CONFIG_HOTPLUG_PCI_FAKE is not set
@@ -315,15 +331,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -364,7 +376,7 @@ CONFIG_INET_TUNNEL=m
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-CONFIG_INET_LRO=m
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -403,9 +415,11 @@ CONFIG_BRIDGE_NETFILTER=y
# CONFIG_NETFILTER_NETLINK_QUEUE is not set
# CONFIG_NETFILTER_NETLINK_LOG is not set
# CONFIG_NF_CONNTRACK is not set
+# CONFIG_NETFILTER_TPROXY is not set
CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+# CONFIG_NETFILTER_XT_TARGET_HL is not set
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -419,6 +433,7 @@ CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_MATCH_DSCP is not set
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
+CONFIG_NETFILTER_XT_MATCH_HL=m
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -508,11 +523,11 @@ CONFIG_IP6_NF_MATCH_HL=m
CONFIG_IP6_NF_MATCH_IPV6HEADER=m
# CONFIG_IP6_NF_MATCH_MH is not set
CONFIG_IP6_NF_MATCH_RT=m
+# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_TARGET_LOG=m
CONFIG_IP6_NF_FILTER=m
# CONFIG_IP6_NF_TARGET_REJECT is not set
CONFIG_IP6_NF_MANGLE=m
-# CONFIG_IP6_NF_TARGET_HL is not set
CONFIG_IP6_NF_RAW=m
# CONFIG_IP6_NF_SECURITY is not set
CONFIG_BRIDGE_NF_EBTABLES=m
@@ -544,6 +559,7 @@ CONFIG_IP_SCTP=m
# CONFIG_SCTP_HMAC_NONE is not set
# CONFIG_SCTP_HMAC_SHA1 is not set
CONFIG_SCTP_HMAC_MD5=y
+# CONFIG_RDS is not set
# CONFIG_TIPC is not set
CONFIG_ATM=m
CONFIG_ATM_CLIP=m
@@ -566,6 +582,7 @@ CONFIG_LLC=m
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
CONFIG_NET_SCHED=y
#
@@ -612,6 +629,7 @@ CONFIG_NET_SCH_FIFO=y
#
# CONFIG_NET_PKTGEN is not set
# CONFIG_NET_TCPPROBE is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
@@ -638,7 +656,6 @@ CONFIG_BT_HCIBCM203X=m
CONFIG_BT_HCIBFUSB=m
CONFIG_BT_HCIVHCI=m
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
@@ -748,7 +765,6 @@ CONFIG_MTD_PHYSMAP_OF=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -846,9 +862,11 @@ CONFIG_MEGARAID_MM=m
CONFIG_MEGARAID_MAILBOX=m
# CONFIG_MEGARAID_LEGACY is not set
CONFIG_MEGARAID_SAS=m
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -875,6 +893,7 @@ CONFIG_SCSI_LPFC=m
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
# CONFIG_MD is not set
# CONFIG_FUSION is not set
@@ -891,6 +910,7 @@ CONFIG_SCSI_LPFC=m
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
CONFIG_BONDING=m
# CONFIG_MACVLAN is not set
@@ -924,6 +944,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -943,6 +965,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -957,6 +980,7 @@ CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
# CONFIG_NETDEV_10000 is not set
# CONFIG_TR is not set
@@ -966,7 +990,6 @@ CONFIG_MV643XX_ETH=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -1084,6 +1107,7 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=m
CONFIG_GEN_RTC=m
# CONFIG_GEN_RTC_X is not set
@@ -1150,12 +1174,9 @@ CONFIG_I2C_MV64XXX=m
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=m
CONFIG_SENSORS_PCF8574=m
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-CONFIG_SENSORS_PCF8591=m
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -1187,6 +1208,7 @@ CONFIG_SENSORS_DS1621=m
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
CONFIG_SENSORS_GL518SM=m
# CONFIG_SENSORS_GL520SM is not set
CONFIG_SENSORS_IT87=m
@@ -1201,11 +1223,14 @@ CONFIG_SENSORS_LM87=m
CONFIG_SENSORS_LM90=m
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
CONFIG_SENSORS_MAX1619=m
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+CONFIG_SENSORS_PCF8591=m
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
CONFIG_SENSORS_SMSC47M1=m
@@ -1363,21 +1388,21 @@ CONFIG_USB_PRINTER=m
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
-CONFIG_USB_STORAGE_DATAFAB=y
-CONFIG_USB_STORAGE_FREECOM=y
-CONFIG_USB_STORAGE_ISD200=y
+CONFIG_USB_STORAGE_DATAFAB=m
+CONFIG_USB_STORAGE_FREECOM=m
+CONFIG_USB_STORAGE_ISD200=m
# CONFIG_USB_STORAGE_USBAT is not set
-CONFIG_USB_STORAGE_SDDR09=y
-CONFIG_USB_STORAGE_SDDR55=y
-CONFIG_USB_STORAGE_JUMPSHOT=y
+CONFIG_USB_STORAGE_SDDR09=m
+CONFIG_USB_STORAGE_SDDR55=m
+CONFIG_USB_STORAGE_JUMPSHOT=m
# CONFIG_USB_STORAGE_ALAUDA is not set
# CONFIG_USB_STORAGE_ONETOUCH is not set
# CONFIG_USB_STORAGE_KARMA is not set
@@ -1402,7 +1427,7 @@ CONFIG_USB_SERIAL_BELKIN=m
# CONFIG_USB_SERIAL_CH341 is not set
CONFIG_USB_SERIAL_WHITEHEAT=m
CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
CONFIG_USB_SERIAL_EMPEG=m
CONFIG_USB_SERIAL_FTDI_SIO=m
@@ -1438,12 +1463,14 @@ CONFIG_USB_SERIAL_MCT_U232=m
# CONFIG_USB_SERIAL_NAVMAN is not set
CONFIG_USB_SERIAL_PL2303=m
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
CONFIG_USB_SERIAL_SAFE=m
CONFIG_USB_SERIAL_SAFE_PADDED=y
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
CONFIG_USB_SERIAL_CYBERJACK=m
CONFIG_USB_SERIAL_XIRCOM=m
@@ -1466,7 +1493,6 @@ CONFIG_USB_LCD=m
CONFIG_USB_LED=m
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1487,6 +1513,7 @@ CONFIG_USB_SPEEDTOUCH=m
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1516,6 +1543,7 @@ CONFIG_DMADEVICES=y
#
# DMA Devices
#
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1524,6 +1552,7 @@ CONFIG_DMADEVICES=y
#
# CONFIG_EXT2_FS is not set
CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
CONFIG_EXT3_FS_POSIX_ACL=y
CONFIG_EXT3_FS_SECURITY=y
@@ -1554,6 +1583,11 @@ CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1612,6 +1646,7 @@ CONFIG_VXFS_FS=m
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1626,7 +1661,6 @@ CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
CONFIG_SUNRPC_XPRT_RDMA=m
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
CONFIG_RPCSEC_GSS_SPKM3=m
# CONFIG_SMB_FS is not set
@@ -1637,6 +1671,7 @@ CONFIG_CIFS=m
CONFIG_CIFS_XATTR=y
CONFIG_CIFS_POSIX=y
# CONFIG_CIFS_DEBUG2 is not set
+# CONFIG_CIFS_DFS_UPCALL is not set
# CONFIG_CIFS_EXPERIMENTAL is not set
# CONFIG_NCP_FS is not set
# CONFIG_CODA_FS is not set
@@ -1704,6 +1739,7 @@ CONFIG_NLS_KOI8_R=m
CONFIG_NLS_KOI8_U=m
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
@@ -1719,12 +1755,15 @@ CONFIG_CRC32=y
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_CHECK_SIGNATURE=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1742,6 +1781,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1775,12 +1817,15 @@ CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1788,18 +1833,21 @@ CONFIG_TRACING=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_DEBUG_STACKOVERFLOW=y
CONFIG_DEBUG_STACK_USAGE=y
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1830,6 +1878,7 @@ CONFIG_SECURITY_SELINUX_DEVELOP=y
CONFIG_SECURITY_SELINUX_AVC_STATS=y
CONFIG_SECURITY_SELINUX_CHECKREQPROT_VALUE=1
# CONFIG_SECURITY_SELINUX_POLICYDB_VERSION_MAX is not set
+# CONFIG_SECURITY_TOMOYO is not set
CONFIG_CRYPTO=y
#
@@ -1845,10 +1894,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
CONFIG_CRYPTO_NULL=m
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=m
# CONFIG_CRYPTO_TEST is not set
@@ -1918,6 +1969,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/ep8248e_defconfig b/arch/powerpc/configs/ep8248e_defconfig
index add6419c15d..04915c3a43f 100644
--- a/arch/powerpc/configs/ep8248e_defconfig
+++ b/arch/powerpc/configs/ep8248e_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:27 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:52 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
@@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -82,20 +93,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -104,10 +114,12 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -115,6 +127,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -122,7 +135,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
@@ -137,18 +149,11 @@ CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -167,6 +172,8 @@ CONFIG_8272=y
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -222,9 +229,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -250,6 +260,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -272,7 +283,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -353,6 +363,7 @@ CONFIG_NETFILTER_ADVANCED=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -364,7 +375,6 @@ CONFIG_NETFILTER_ADVANCED=y
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -468,7 +478,6 @@ CONFIG_MTD_PHYSMAP_OF=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -517,6 +526,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
@@ -550,6 +560,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -572,6 +584,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
@@ -581,8 +594,8 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_JME is not set
@@ -594,6 +607,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -603,6 +617,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -610,7 +625,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -662,6 +676,7 @@ CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
@@ -751,8 +766,10 @@ CONFIG_DAB=y
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -763,6 +780,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
@@ -781,6 +799,10 @@ CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -894,6 +916,7 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -907,11 +930,11 @@ CONFIG_GENERIC_FIND_LAST_BIT=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -927,6 +950,7 @@ CONFIG_MAGIC_SYSRQ=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -955,9 +979,12 @@ CONFIG_DEBUG_INFO=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -965,16 +992,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1005,9 +1034,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
@@ -1071,6 +1102,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/ep88xc_defconfig b/arch/powerpc/configs/ep88xc_defconfig
index b2fdfd9e183..c2a439595f4 100644
--- a/arch/powerpc/configs/ep88xc_defconfig
+++ b/arch/powerpc/configs/ep88xc_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:28 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:53 2009
#
# CONFIG_PPC64 is not set
@@ -52,6 +52,7 @@ CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -69,6 +70,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -84,19 +94,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -105,10 +115,12 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -116,13 +128,13 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -138,11 +150,6 @@ CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -233,9 +240,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -270,14 +280,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -328,6 +335,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -340,7 +348,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -439,7 +446,6 @@ CONFIG_MTD_PHYSMAP_OF=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -463,6 +469,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -491,6 +498,8 @@ CONFIG_LXT_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -511,7 +520,6 @@ CONFIG_FS_ENET_MDIO_FEC=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -562,6 +570,7 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
@@ -631,6 +640,7 @@ CONFIG_DAB=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -655,6 +665,11 @@ CONFIG_FILE_LOCKING=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -698,6 +713,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -709,7 +725,6 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -741,6 +756,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -758,6 +774,7 @@ CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -775,6 +792,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -801,9 +821,12 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -811,17 +834,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/linkstation_defconfig b/arch/powerpc/configs/linkstation_defconfig
index 15900dcf0bf..a4053ab9e24 100644
--- a/arch/powerpc/configs/linkstation_defconfig
+++ b/arch/powerpc/configs/linkstation_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc6
-# Fri Mar 6 00:07:38 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:54 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -68,6 +70,7 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
@@ -100,21 +103,24 @@ CONFIG_NAMESPACES=y
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-# CONFIG_COMPAT_BRK is not set
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -124,10 +130,12 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+# CONFIG_COMPAT_BRK is not set
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -135,6 +143,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -147,7 +156,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -168,8 +176,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -191,6 +197,8 @@ CONFIG_LINKSTATION=y
CONFIG_MPC10X_BRIDGE=y
CONFIG_MPC10X_OPENPIC=y
# CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -250,9 +258,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -277,6 +288,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -299,7 +311,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -371,6 +382,7 @@ CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_CLASSIFY is not set
# CONFIG_NETFILTER_XT_TARGET_CONNMARK is not set
# CONFIG_NETFILTER_XT_TARGET_DSCP is not set
+CONFIG_NETFILTER_XT_TARGET_HL=m
# CONFIG_NETFILTER_XT_TARGET_MARK is not set
# CONFIG_NETFILTER_XT_TARGET_NFLOG is not set
# CONFIG_NETFILTER_XT_TARGET_NFQUEUE is not set
@@ -379,6 +391,7 @@ CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_TARGET_TRACE is not set
# CONFIG_NETFILTER_XT_TARGET_TCPMSS is not set
# CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP is not set
+# CONFIG_NETFILTER_XT_MATCH_CLUSTER is not set
# CONFIG_NETFILTER_XT_MATCH_COMMENT is not set
# CONFIG_NETFILTER_XT_MATCH_CONNBYTES is not set
# CONFIG_NETFILTER_XT_MATCH_CONNLIMIT is not set
@@ -389,6 +402,7 @@ CONFIG_NETFILTER_XTABLES=m
# CONFIG_NETFILTER_XT_MATCH_ESP is not set
# CONFIG_NETFILTER_XT_MATCH_HASHLIMIT is not set
# CONFIG_NETFILTER_XT_MATCH_HELPER is not set
+# CONFIG_NETFILTER_XT_MATCH_HL is not set
# CONFIG_NETFILTER_XT_MATCH_IPRANGE is not set
# CONFIG_NETFILTER_XT_MATCH_LENGTH is not set
# CONFIG_NETFILTER_XT_MATCH_LIMIT is not set
@@ -465,6 +479,7 @@ CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -477,7 +492,6 @@ CONFIG_IP_NF_ARP_MANGLE=m
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -625,6 +639,7 @@ CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
@@ -690,9 +705,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -715,6 +732,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -791,6 +809,7 @@ CONFIG_PATA_SIL680=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -805,6 +824,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
CONFIG_NET_TULIP=y
# CONFIG_DE2104X is not set
CONFIG_TULIP=y
@@ -833,6 +854,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -843,8 +865,8 @@ CONFIG_R8169=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -858,6 +880,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -867,6 +890,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -874,7 +898,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -985,6 +1008,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -1050,7 +1074,6 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -1082,6 +1105,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -1096,11 +1120,14 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -1195,7 +1222,6 @@ CONFIG_HID=m
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -1250,11 +1276,11 @@ CONFIG_USB_PRINTER=m
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1290,7 +1316,7 @@ CONFIG_USB_SERIAL_CONSOLE=y
# CONFIG_USB_SERIAL_CH341 is not set
# CONFIG_USB_SERIAL_WHITEHEAT is not set
# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set
-# CONFIG_USB_SERIAL_CP2101 is not set
+# CONFIG_USB_SERIAL_CP210X is not set
# CONFIG_USB_SERIAL_CYPRESS_M8 is not set
# CONFIG_USB_SERIAL_EMPEG is not set
CONFIG_USB_SERIAL_FTDI_SIO=y
@@ -1314,11 +1340,13 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_SERIAL_NAVMAN is not set
# CONFIG_USB_SERIAL_PL2303 is not set
# CONFIG_USB_SERIAL_OTI6858 is not set
+# CONFIG_USB_SERIAL_QUALCOMM is not set
# CONFIG_USB_SERIAL_SPCP8X5 is not set
# CONFIG_USB_SERIAL_HP4X is not set
# CONFIG_USB_SERIAL_SAFE is not set
# CONFIG_USB_SERIAL_SIEMENS_MPI is not set
# CONFIG_USB_SERIAL_SIERRAWIRELESS is not set
+# CONFIG_USB_SERIAL_SYMBOL is not set
# CONFIG_USB_SERIAL_TI is not set
# CONFIG_USB_SERIAL_CYBERJACK is not set
# CONFIG_USB_SERIAL_XIRCOM is not set
@@ -1341,7 +1369,6 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1357,6 +1384,7 @@ CONFIG_USB_SERIAL_FTDI_SIO=y
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1418,8 +1446,9 @@ CONFIG_RTC_DRV_RS5C372=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1430,6 +1459,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1456,6 +1486,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
@@ -1507,6 +1542,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1524,7 +1560,6 @@ CONFIG_NFS_ACL_SUPPORT=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1584,6 +1619,7 @@ CONFIG_NLS_ISO8859_1=m
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1597,15 +1633,18 @@ CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_TEXTSEARCH=y
CONFIG_TEXTSEARCH_KMP=m
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1623,6 +1662,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1652,9 +1694,12 @@ CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1662,17 +1707,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1703,10 +1750,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1776,6 +1825,7 @@ CONFIG_CRYPTO_TWOFISH_COMMON=m
# Compression
#
CONFIG_CRYPTO_DEFLATE=m
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/mgcoge_defconfig b/arch/powerpc/configs/mgcoge_defconfig
index c58c38d5b7a..31e1df66515 100644
--- a/arch/powerpc/configs/mgcoge_defconfig
+++ b/arch/powerpc/configs/mgcoge_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:30 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:55 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
@@ -57,6 +58,7 @@ CONFIG_HIBERNATE_32=y
CONFIG_ARCH_HIBERNATION_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -73,6 +75,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -83,23 +94,25 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
CONFIG_PCSPKR_PLATFORM=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -108,10 +121,12 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -119,6 +134,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -126,7 +142,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
@@ -141,18 +156,11 @@ CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
CONFIG_PPC_CHRP=y
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -171,7 +179,9 @@ CONFIG_8272=y
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
CONFIG_PPC_NATIVE=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_UDBG_RTAS_CONSOLE is not set
# CONFIG_IPIC is not set
CONFIG_MPIC=y
@@ -231,9 +241,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -260,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -282,7 +296,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -344,6 +357,7 @@ CONFIG_NETFILTER_ADVANCED=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -355,7 +369,6 @@ CONFIG_NETFILTER_ADVANCED=y
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -464,7 +477,6 @@ CONFIG_MTD_PHYSMAP_OF=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -517,6 +529,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
@@ -551,6 +564,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -576,7 +591,6 @@ CONFIG_FS_ENET_HAS_SCC=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -631,6 +645,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_RTAS is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
@@ -720,8 +735,10 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -732,6 +749,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
# CONFIG_EXT3_FS_XATTR is not set
# CONFIG_EXT4_FS is not set
CONFIG_JBD=y
@@ -751,6 +769,10 @@ CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -872,6 +894,7 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -887,11 +910,12 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -907,6 +931,7 @@ CONFIG_DEBUG_FS=y
CONFIG_DEBUG_KERNEL=y
# CONFIG_DEBUG_SHIRQ is not set
# CONFIG_DETECT_SOFTLOCKUP is not set
+# CONFIG_DETECT_HUNG_TASK is not set
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -935,9 +960,12 @@ CONFIG_DEBUG_INFO=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -945,16 +973,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -986,9 +1017,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
@@ -1052,6 +1085,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/mgsuvd_defconfig b/arch/powerpc/configs/mgsuvd_defconfig
index 297b5d5042b..24fa90792c5 100644
--- a/arch/powerpc/configs/mgsuvd_defconfig
+++ b/arch/powerpc/configs/mgsuvd_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:32 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:55 2009
#
# CONFIG_PPC64 is not set
@@ -51,6 +51,7 @@ CONFIG_AUDIT_ARCH=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -68,6 +69,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=17
CONFIG_GROUP_SCHED=y
@@ -82,20 +92,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
# CONFIG_BUG is not set
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -103,10 +116,12 @@ CONFIG_EVENTFD=y
CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -114,6 +129,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -121,7 +137,6 @@ CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -137,11 +152,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -232,9 +242,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
@@ -268,14 +281,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -331,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -343,7 +354,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -447,7 +457,6 @@ CONFIG_MTD_PHYSMAP_OF=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -483,6 +492,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -511,6 +521,8 @@ CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -531,7 +543,6 @@ CONFIG_FS_ENET_HAS_SCC=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -582,6 +593,7 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
@@ -651,6 +663,7 @@ CONFIG_SSB_POSSIBLE=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -663,6 +676,7 @@ CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -686,6 +700,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -739,6 +758,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -750,7 +770,6 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -782,6 +801,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -797,11 +817,12 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -819,13 +840,25 @@ CONFIG_DEBUG_FS=y
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -917,6 +950,7 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/mpc7448_hpc2_defconfig b/arch/powerpc/configs/mpc7448_hpc2_defconfig
index 38712e861c4..642ab67c843 100644
--- a/arch/powerpc/configs/mpc7448_hpc2_defconfig
+++ b/arch/powerpc/configs/mpc7448_hpc2_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:33 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:56 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -85,20 +96,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -108,16 +122,19 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -125,7 +142,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -141,18 +157,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -172,6 +181,8 @@ CONFIG_MPC7448HPC2=y
# CONFIG_PPC_PRPMC2800 is not set
# CONFIG_PPC_C2K is not set
CONFIG_TSI108_BRIDGE=y
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
CONFIG_MPIC_WEIRD=y
@@ -230,9 +241,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -255,6 +269,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -277,7 +292,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -333,6 +347,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -345,7 +360,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -392,12 +406,16 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -454,9 +472,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -479,6 +499,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -554,6 +575,7 @@ CONFIG_SATA_MV=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -587,6 +609,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -628,6 +652,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -639,10 +664,10 @@ CONFIG_NETDEV_1000=y
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
CONFIG_TSI108_ETH=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -652,6 +677,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -661,6 +687,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -668,7 +695,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -839,7 +865,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
CONFIG_USB_ARCH_HAS_HCD=y
CONFIG_USB_ARCH_HAS_OHCI=y
@@ -853,7 +878,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -869,6 +894,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -879,6 +905,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -902,6 +929,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -944,6 +976,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
@@ -953,7 +986,6 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -985,6 +1017,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -998,11 +1031,13 @@ CONFIG_CRC_T10DIF=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1024,13 +1059,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -1122,6 +1168,7 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/mpc8272_ads_defconfig b/arch/powerpc/configs/mpc8272_ads_defconfig
index d85a43cb821..cb966ca2ce8 100644
--- a/arch/powerpc/configs/mpc8272_ads_defconfig
+++ b/arch/powerpc/configs/mpc8272_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:35 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:57 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
@@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -82,20 +93,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -105,10 +115,12 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -116,6 +128,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -123,7 +136,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
@@ -138,18 +150,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -169,6 +174,8 @@ CONFIG_PQ2_ADS_PCI_PIC=y
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -225,9 +232,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -253,6 +263,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -275,7 +286,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -356,6 +366,7 @@ CONFIG_NETFILTER_ADVANCED=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -367,7 +378,6 @@ CONFIG_NETFILTER_ADVANCED=y
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -472,7 +482,6 @@ CONFIG_MTD_PHYSMAP_OF=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -521,6 +530,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
@@ -554,6 +564,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -576,6 +588,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
@@ -585,8 +598,8 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_JME is not set
@@ -598,6 +611,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -607,6 +621,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -614,7 +629,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -668,7 +682,6 @@ CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -719,6 +732,7 @@ CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
@@ -809,8 +823,10 @@ CONFIG_DAB=y
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -821,6 +837,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -842,6 +859,10 @@ CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -956,6 +977,7 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -971,11 +993,11 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -993,6 +1015,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1022,9 +1047,12 @@ CONFIG_DEBUG_INFO=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1032,16 +1060,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1072,9 +1102,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
@@ -1138,6 +1170,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/mpc83xx_defconfig b/arch/powerpc/configs/mpc83xx_defconfig
index 45f03cad8db..433c303eb82 100644
--- a/arch/powerpc/configs/mpc83xx_defconfig
+++ b/arch/powerpc/configs/mpc83xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:36 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:21:58 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_FSL_EMB_PERFMON is not set
# CONFIG_ALTIVEC is not set
@@ -58,6 +59,7 @@ CONFIG_REDBOOT=y
CONFIG_ARCH_SUSPEND_POSSIBLE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -75,6 +77,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -89,20 +100,23 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -111,10 +125,12 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
+CONFIG_COMPAT_BRK=y
CONFIG_SLAB=y
# CONFIG_SLUB is not set
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -122,6 +138,7 @@ CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -134,7 +151,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -150,18 +166,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -189,6 +198,8 @@ CONFIG_PPC_MPC834x=y
CONFIG_PPC_MPC837x=y
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
CONFIG_IPIC=y
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -251,9 +262,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -281,6 +295,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -303,7 +318,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -359,6 +373,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -371,7 +386,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -485,7 +499,6 @@ CONFIG_MTD_NAND_FSL_ELBC=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -516,13 +529,20 @@ CONFIG_BLK_DEV_RAM_SIZE=32768
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -580,9 +600,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -605,6 +627,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -681,6 +704,7 @@ CONFIG_ATA_SFF=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -714,6 +738,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -733,6 +759,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -743,14 +770,15 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
CONFIG_UCC_GETH=y
# CONFIG_UGETH_MAGIC_PACKET is not set
# CONFIG_UGETH_TX_ON_DEMAND is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -760,6 +788,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -769,6 +798,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -776,7 +806,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -867,6 +896,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
@@ -932,12 +962,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -992,6 +1019,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -1006,11 +1034,15 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
+# CONFIG_SENSORS_SHT15 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -1121,15 +1153,17 @@ CONFIG_USB_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1181,6 +1215,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_ISP1760_HCD is not set
# CONFIG_USB_OHCI_HCD is not set
# CONFIG_USB_UHCI_HCD is not set
+# CONFIG_USB_FHCI_HCD is not set
# CONFIG_USB_SL811_HCD is not set
# CONFIG_USB_R8A66597_HCD is not set
# CONFIG_USB_WHCI_HCD is not set
@@ -1195,11 +1230,11 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
@@ -1229,7 +1264,6 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1245,6 +1279,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1254,6 +1289,7 @@ CONFIG_USB_EHCI_HCD_PPC_OF=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1264,6 +1300,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1286,6 +1323,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1329,6 +1371,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1341,7 +1384,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1375,6 +1417,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_DLM is not set
CONFIG_UCC_FAST=y
CONFIG_UCC=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1388,11 +1431,13 @@ CONFIG_CRC_T10DIF=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1412,13 +1457,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -1448,10 +1504,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
CONFIG_CRYPTO_AUTHENC=y
# CONFIG_CRYPTO_TEST is not set
@@ -1520,6 +1578,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/mpc866_ads_defconfig b/arch/powerpc/configs/mpc866_ads_defconfig
index 1793d08e9c0..3add6f62b21 100644
--- a/arch/powerpc/configs/mpc866_ads_defconfig
+++ b/arch/powerpc/configs/mpc866_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:38 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:00 2009
#
# CONFIG_PPC64 is not set
@@ -51,6 +51,7 @@ CONFIG_AUDIT_ARCH=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -68,6 +69,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -83,18 +93,18 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
# CONFIG_HOTPLUG is not set
CONFIG_PRINTK=y
# CONFIG_BUG is not set
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
# CONFIG_EPOLL is not set
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -103,10 +113,12 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -114,6 +126,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -121,7 +134,6 @@ CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -137,11 +149,6 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -232,9 +239,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
# CONFIG_PROC_DEVICETREE is not set
# CONFIG_CMDLINE_BOOL is not set
@@ -268,14 +278,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -331,6 +338,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -343,7 +351,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -379,9 +386,13 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_ATA_OVER_ETH is not set
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -396,6 +407,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -424,6 +436,8 @@ CONFIG_FIXED_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -437,6 +451,7 @@ CONFIG_FS_ENET_HAS_SCC=y
CONFIG_FS_ENET_HAS_FEC=y
CONFIG_FS_ENET_MDIO_FEC=y
CONFIG_NETDEV_1000=y
+# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
CONFIG_NETDEV_10000=y
@@ -445,7 +460,6 @@ CONFIG_NETDEV_10000=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -492,7 +506,6 @@ CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -540,6 +553,7 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
@@ -622,7 +636,6 @@ CONFIG_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_USB_SUPPORT=y
# CONFIG_USB_ARCH_HAS_HCD is not set
# CONFIG_USB_ARCH_HAS_OHCI is not set
@@ -635,7 +648,7 @@ CONFIG_USB_SUPPORT=y
#
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
# CONFIG_USB_GADGET is not set
@@ -649,6 +662,7 @@ CONFIG_USB_SUPPORT=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -661,6 +675,7 @@ CONFIG_EXT2_FS_XATTR=y
# CONFIG_EXT2_FS_SECURITY is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -683,6 +698,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -725,6 +745,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -736,7 +757,6 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -768,6 +788,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -782,11 +803,11 @@ CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -806,13 +827,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_RCU_CPU_STALL_DETECTOR is not set
# CONFIG_LATENCYTOP is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -903,6 +935,7 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/mpc86xx_defconfig b/arch/powerpc/configs/mpc86xx_defconfig
index adc756e1f25..5bb1b8eb0b4 100644
--- a/arch/powerpc/configs/mpc86xx_defconfig
+++ b/arch/powerpc/configs/mpc86xx_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:39 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:00 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_PHYS_64BIT is not set
CONFIG_ALTIVEC=y
@@ -57,6 +58,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -71,11 +73,21 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
CONFIG_BSD_PROCESS_ACCT=y
# CONFIG_BSD_PROCESS_ACCT_V3 is not set
# CONFIG_TASKSTATS is not set
CONFIG_AUDIT=y
# CONFIG_AUDITSYSCALL is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -91,22 +103,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -116,10 +130,12 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
# CONFIG_KPROBES is not set
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
@@ -128,6 +144,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -141,7 +158,6 @@ CONFIG_MODVERSIONS=y
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -157,18 +173,11 @@ CONFIG_IOSCHED_CFQ=y
CONFIG_DEFAULT_CFQ=y
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="cfq"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -183,9 +192,12 @@ CONFIG_PPC_86xx=y
CONFIG_MPC8641_HPCN=y
CONFIG_SBC8641D=y
CONFIG_MPC8610_HPCD=y
+# CONFIG_GEF_PPC9A is not set
+# CONFIG_GEF_SBC310 is not set
CONFIG_GEF_SBC610=y
CONFIG_MPC8641=y
CONFIG_MPC8610=y
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -247,9 +259,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -276,6 +291,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
CONFIG_HAS_RAPIDIO=y
@@ -299,7 +315,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -387,6 +402,7 @@ CONFIG_SCTP_HMAC_MD5=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -399,7 +415,6 @@ CONFIG_SCTP_HMAC_MD5=y
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_FIB_RULES=y
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
@@ -454,13 +469,20 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+CONFIG_EEPROM_LEGACY=y
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
# CONFIG_IDE is not set
@@ -519,9 +541,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -544,6 +568,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -620,6 +645,7 @@ CONFIG_PATA_ALI=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=y
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -653,6 +679,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -672,6 +700,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -682,11 +711,12 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+CONFIG_FSL_PQ_MDIO=y
CONFIG_GIANFAR=y
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -696,6 +726,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -705,6 +736,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -712,7 +744,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -879,12 +910,9 @@ CONFIG_I2C_MPC=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-CONFIG_EEPROM_LEGACY=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -963,7 +991,7 @@ CONFIG_VIDEO_MEDIA=m
#
# CONFIG_MEDIA_ATTACH is not set
CONFIG_MEDIA_TUNER=m
-# CONFIG_MEDIA_TUNER_CUSTOMIZE is not set
+# CONFIG_MEDIA_TUNER_CUSTOMISE is not set
CONFIG_MEDIA_TUNER_SIMPLE=m
CONFIG_MEDIA_TUNER_TDA8290=m
CONFIG_MEDIA_TUNER_TDA9887=m
@@ -972,6 +1000,7 @@ CONFIG_MEDIA_TUNER_TEA5767=m
CONFIG_MEDIA_TUNER_MT20XX=m
CONFIG_MEDIA_TUNER_XC2028=m
CONFIG_MEDIA_TUNER_XC5000=m
+CONFIG_MEDIA_TUNER_MC44S803=m
# CONFIG_DVB_DYNAMIC_MINORS is not set
CONFIG_DVB_CAPTURE_DRIVERS=y
@@ -1011,103 +1040,7 @@ CONFIG_DVB_CAPTURE_DRIVERS=y
#
# Supported DVB Frontends
#
-
-#
-# Customise DVB Frontends
-#
# CONFIG_DVB_FE_CUSTOMISE is not set
-
-#
-# Multistandard (satellite) frontends
-#
-# CONFIG_DVB_STB0899 is not set
-# CONFIG_DVB_STB6100 is not set
-
-#
-# DVB-S (satellite) frontends
-#
-# CONFIG_DVB_CX24110 is not set
-# CONFIG_DVB_CX24123 is not set
-# CONFIG_DVB_MT312 is not set
-# CONFIG_DVB_S5H1420 is not set
-# CONFIG_DVB_STV0288 is not set
-# CONFIG_DVB_STB6000 is not set
-# CONFIG_DVB_STV0299 is not set
-# CONFIG_DVB_TDA8083 is not set
-# CONFIG_DVB_TDA10086 is not set
-# CONFIG_DVB_TDA8261 is not set
-# CONFIG_DVB_VES1X93 is not set
-# CONFIG_DVB_TUNER_ITD1000 is not set
-# CONFIG_DVB_TUNER_CX24113 is not set
-# CONFIG_DVB_TDA826X is not set
-# CONFIG_DVB_TUA6100 is not set
-# CONFIG_DVB_CX24116 is not set
-# CONFIG_DVB_SI21XX is not set
-
-#
-# DVB-T (terrestrial) frontends
-#
-# CONFIG_DVB_SP8870 is not set
-# CONFIG_DVB_SP887X is not set
-# CONFIG_DVB_CX22700 is not set
-# CONFIG_DVB_CX22702 is not set
-# CONFIG_DVB_DRX397XD is not set
-# CONFIG_DVB_L64781 is not set
-# CONFIG_DVB_TDA1004X is not set
-# CONFIG_DVB_NXT6000 is not set
-# CONFIG_DVB_MT352 is not set
-# CONFIG_DVB_ZL10353 is not set
-# CONFIG_DVB_DIB3000MB is not set
-# CONFIG_DVB_DIB3000MC is not set
-# CONFIG_DVB_DIB7000M is not set
-# CONFIG_DVB_DIB7000P is not set
-# CONFIG_DVB_TDA10048 is not set
-
-#
-# DVB-C (cable) frontends
-#
-# CONFIG_DVB_VES1820 is not set
-# CONFIG_DVB_TDA10021 is not set
-# CONFIG_DVB_TDA10023 is not set
-# CONFIG_DVB_STV0297 is not set
-
-#
-# ATSC (North American/Korean Terrestrial/Cable DTV) frontends
-#
-# CONFIG_DVB_NXT200X is not set
-# CONFIG_DVB_OR51211 is not set
-# CONFIG_DVB_OR51132 is not set
-# CONFIG_DVB_BCM3510 is not set
-# CONFIG_DVB_LGDT330X is not set
-# CONFIG_DVB_LGDT3304 is not set
-# CONFIG_DVB_S5H1409 is not set
-# CONFIG_DVB_AU8522 is not set
-# CONFIG_DVB_S5H1411 is not set
-
-#
-# ISDB-T (terrestrial) frontends
-#
-# CONFIG_DVB_S921 is not set
-
-#
-# Digital terrestrial only tuners/PLL
-#
-# CONFIG_DVB_PLL is not set
-# CONFIG_DVB_TUNER_DIB0070 is not set
-
-#
-# SEC control devices for DVB-S
-#
-# CONFIG_DVB_LNBP21 is not set
-# CONFIG_DVB_ISL6405 is not set
-# CONFIG_DVB_ISL6421 is not set
-# CONFIG_DVB_LGS8GL5 is not set
-
-#
-# Tools to develop new frontends
-#
-# CONFIG_DVB_DUMMY_FE is not set
-# CONFIG_DVB_AF9013 is not set
CONFIG_DAB=y
# CONFIG_USB_DABUSB is not set
@@ -1187,6 +1120,8 @@ CONFIG_SND_PCI=y
# CONFIG_SND_INDIGO is not set
# CONFIG_SND_INDIGOIO is not set
# CONFIG_SND_INDIGODJ is not set
+# CONFIG_SND_INDIGOIOX is not set
+# CONFIG_SND_INDIGODJX is not set
# CONFIG_SND_EMU10K1 is not set
# CONFIG_SND_EMU10K1X is not set
# CONFIG_SND_ENS1370 is not set
@@ -1241,15 +1176,17 @@ CONFIG_USB_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+# CONFIG_HID_KYE is not set
CONFIG_HID_GYRATION=y
+# CONFIG_HID_KENSINGTON is not set
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1322,11 +1259,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1368,7 +1305,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1385,6 +1321,7 @@ CONFIG_USB_STORAGE=y
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1446,8 +1383,9 @@ CONFIG_RTC_DRV_CMOS=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1458,6 +1396,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1481,6 +1420,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
@@ -1535,6 +1479,7 @@ CONFIG_SYSV_FS=m
CONFIG_UFS_FS=m
# CONFIG_UFS_FS_WRITE is not set
# CONFIG_UFS_DEBUG is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1550,7 +1495,6 @@ CONFIG_EXPORTFS=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1621,6 +1565,7 @@ CONFIG_NLS_DEFAULT="iso8859-1"
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=m
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1635,11 +1580,12 @@ CONFIG_CRC32=y
# CONFIG_CRC7 is not set
CONFIG_LIBCRC32C=m
CONFIG_ZLIB_INFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1657,6 +1603,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1687,9 +1636,12 @@ CONFIG_DEBUG_INFO=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1697,17 +1649,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1738,10 +1692,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_GF128MUL is not set
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1810,6 +1766,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/mpc885_ads_defconfig b/arch/powerpc/configs/mpc885_ads_defconfig
index 4b76321c0ec..42e64ebc279 100644
--- a/arch/powerpc/configs/mpc885_ads_defconfig
+++ b/arch/powerpc/configs/mpc885_ads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:41 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:01 2009
#
# CONFIG_PPC64 is not set
@@ -52,6 +52,7 @@ CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -69,6 +70,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -84,19 +94,19 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_BLK_DEV_INITRD is not set
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
# CONFIG_SYSCTL_SYSCALL is not set
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_ALL is not set
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
# CONFIG_ELF_CORE is not set
-CONFIG_COMPAT_BRK=y
# CONFIG_BASE_FULL is not set
# CONFIG_FUTEX is not set
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -105,10 +115,12 @@ CONFIG_SHMEM=y
CONFIG_AIO=y
# CONFIG_VM_EVENT_COUNTERS is not set
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -116,13 +128,13 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_BASE_SMALL=1
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -138,11 +150,6 @@ CONFIG_DEFAULT_DEADLINE=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="deadline"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
@@ -240,9 +247,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -277,14 +287,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0x80000000
-CONFIG_CONSISTENT_START=0xfd000000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -335,6 +342,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -347,7 +355,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -450,7 +457,6 @@ CONFIG_MTD_PHYSMAP_OF=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -474,6 +480,7 @@ CONFIG_HAVE_IDE=y
# CONFIG_MD is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -502,6 +509,8 @@ CONFIG_DAVICOM_PHY=y
# CONFIG_MDIO_BITBANG is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=y
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -522,7 +531,6 @@ CONFIG_FS_ENET_MDIO_FEC=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -573,6 +581,7 @@ CONFIG_UNIX98_PTYS=y
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
CONFIG_GEN_RTC=y
# CONFIG_GEN_RTC_X is not set
@@ -642,6 +651,7 @@ CONFIG_DAB=y
# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -666,6 +676,11 @@ CONFIG_FILE_LOCKING=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -709,6 +724,7 @@ CONFIG_CRAMFS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -720,7 +736,6 @@ CONFIG_LOCKD=y
CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -752,6 +767,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -769,6 +785,7 @@ CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -786,6 +803,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -812,9 +832,12 @@ CONFIG_DEBUG_INFO=y
# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -822,17 +845,19 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
diff --git a/arch/powerpc/configs/pq2fads_defconfig b/arch/powerpc/configs/pq2fads_defconfig
index fdded96633a..129d80860f2 100644
--- a/arch/powerpc/configs/pq2fads_defconfig
+++ b/arch/powerpc/configs/pq2fads_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:42 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:02 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
@@ -55,6 +56,7 @@ CONFIG_GENERIC_BUG=y
CONFIG_DEFAULT_UIMAGE=y
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -71,6 +73,15 @@ CONFIG_SYSVIPC_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
CONFIG_IKCONFIG=y
CONFIG_IKCONFIG_PROC=y
CONFIG_LOG_BUF_SHIFT=14
@@ -81,22 +92,24 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_NAMESPACES is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_STRIP_GENERATED=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -106,10 +119,12 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
@@ -117,6 +132,7 @@ CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_CLK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -124,7 +140,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
# CONFIG_LBD is not set
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
#
@@ -139,18 +154,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -169,6 +177,8 @@ CONFIG_PQ2_ADS_PCI_PIC=y
# CONFIG_PPC_83xx is not set
# CONFIG_PPC_86xx is not set
# CONFIG_EMBEDDED6xx is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -225,9 +235,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -254,6 +267,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_DEBUG is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -276,7 +290,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -357,6 +370,7 @@ CONFIG_NETFILTER_ADVANCED=y
# CONFIG_LLC2 is not set
# CONFIG_IPX is not set
# CONFIG_ATALK is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -368,7 +382,6 @@ CONFIG_NETFILTER_ADVANCED=y
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
# CONFIG_BT is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -473,7 +486,6 @@ CONFIG_MTD_PHYSMAP_OF=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -498,10 +510,14 @@ CONFIG_BLK_DEV_LOOP=y
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
@@ -573,6 +589,7 @@ CONFIG_IDE_PROC_FS=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_EQUALIZER is not set
@@ -606,6 +623,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -628,6 +647,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000 is not set
# CONFIG_E1000E is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_R8169 is not set
@@ -637,8 +657,8 @@ CONFIG_NETDEV_1000=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_JME is not set
@@ -650,6 +670,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -659,6 +680,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -666,7 +688,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -720,7 +741,6 @@ CONFIG_MOUSE_PS2=y
CONFIG_MOUSE_PS2_ALPS=y
CONFIG_MOUSE_PS2_LOGIPS2PP=y
CONFIG_MOUSE_PS2_SYNAPTICS=y
-CONFIG_MOUSE_PS2_LIFEBOOK=y
CONFIG_MOUSE_PS2_TRACKPOINT=y
# CONFIG_MOUSE_PS2_ELANTECH is not set
# CONFIG_MOUSE_PS2_TOUCHKIT is not set
@@ -773,6 +793,7 @@ CONFIG_LEGACY_PTYS=y
CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=y
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
# CONFIG_NVRAM is not set
# CONFIG_GEN_RTC is not set
# CONFIG_R3964 is not set
@@ -868,7 +889,7 @@ CONFIG_USB_ARCH_HAS_EHCI=y
# CONFIG_USB_GADGET_MUSB_HDRC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
CONFIG_USB_GADGET=y
# CONFIG_USB_GADGET_DEBUG is not set
@@ -907,13 +928,16 @@ CONFIG_USB_ETH_RNDIS=y
# OTG and related infrastructure
#
# CONFIG_USB_GPIO_VBUS is not set
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
# CONFIG_ACCESSIBILITY is not set
# CONFIG_INFINIBAND is not set
+# CONFIG_EDAC is not set
# CONFIG_RTC_CLASS is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -924,6 +948,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -945,6 +970,10 @@ CONFIG_AUTOFS4_FS=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1059,6 +1088,7 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_KOI8_R is not set
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1074,11 +1104,12 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1096,6 +1127,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
# CONFIG_SCHED_DEBUG is not set
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1125,9 +1159,12 @@ CONFIG_DEBUG_INFO=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1135,16 +1172,18 @@ CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
# CONFIG_FUNCTION_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
# CONFIG_DEBUG_STACKOVERFLOW is not set
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1175,9 +1214,11 @@ CONFIG_CRYPTO_BLKCIPHER2=y
CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
@@ -1241,6 +1282,7 @@ CONFIG_CRYPTO_DES=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/prpmc2800_defconfig b/arch/powerpc/configs/prpmc2800_defconfig
index e971db17113..e9f287f313f 100644
--- a/arch/powerpc/configs/prpmc2800_defconfig
+++ b/arch/powerpc/configs/prpmc2800_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc2
-# Mon Jan 26 15:35:44 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:03 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
CONFIG_ALTIVEC=y
CONFIG_PPC_STD_MMU=y
@@ -56,6 +57,7 @@ CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -70,9 +72,19 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
+
+#
+# RCU Subsystem
+#
+CONFIG_CLASSIC_RCU=y
+# CONFIG_TREE_RCU is not set
+# CONFIG_PREEMPT_RCU is not set
+# CONFIG_TREE_RCU_TRACE is not set
+# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_IKCONFIG is not set
CONFIG_LOG_BUF_SHIFT=14
CONFIG_GROUP_SCHED=y
@@ -89,22 +101,26 @@ CONFIG_NAMESPACES=y
# CONFIG_IPC_NS is not set
# CONFIG_USER_NS is not set
# CONFIG_PID_NS is not set
+# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+CONFIG_RD_BZIP2=y
+CONFIG_RD_LZMA=y
# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
# CONFIG_EMBEDDED is not set
CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
# CONFIG_KALLSYMS_EXTRA_PASS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -114,16 +130,19 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -131,7 +150,6 @@ CONFIG_BASE_SMALL=0
# CONFIG_MODULES is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -147,18 +165,11 @@ CONFIG_DEFAULT_AS=y
# CONFIG_DEFAULT_CFQ is not set
# CONFIG_DEFAULT_NOOP is not set
CONFIG_DEFAULT_IOSCHED="anticipatory"
-CONFIG_CLASSIC_RCU=y
-# CONFIG_TREE_RCU is not set
-# CONFIG_PREEMPT_RCU is not set
-# CONFIG_TREE_RCU_TRACE is not set
-# CONFIG_PREEMPT_RCU_TRACE is not set
# CONFIG_FREEZER is not set
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -178,6 +189,8 @@ CONFIG_EMBEDDED6xx=y
CONFIG_PPC_PRPMC2800=y
# CONFIG_PPC_C2K is not set
CONFIG_MV64X60=y
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -237,9 +250,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
# CONFIG_CMDLINE_BOOL is not set
@@ -262,6 +278,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -279,15 +296,11 @@ CONFIG_PAGE_OFFSET=0xc0000000
CONFIG_KERNEL_START=0xc0000000
CONFIG_PHYSICAL_START=0x00000000
CONFIG_TASK_SIZE=0xc0000000
-CONFIG_CONSISTENT_START=0xff100000
-CONFIG_CONSISTENT_SIZE=0x00200000
CONFIG_NET=y
#
# Networking options
#
-# CONFIG_NET_NS is not set
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -318,7 +331,7 @@ CONFIG_SYN_COOKIES=y
CONFIG_INET_XFRM_MODE_TRANSPORT=y
CONFIG_INET_XFRM_MODE_TUNNEL=y
CONFIG_INET_XFRM_MODE_BEET=y
-# CONFIG_INET_LRO is not set
+CONFIG_INET_LRO=y
CONFIG_INET_DIAG=y
CONFIG_INET_TCP_DIAG=y
# CONFIG_TCP_CONG_ADVANCED is not set
@@ -343,6 +356,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -355,7 +369,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -459,7 +472,6 @@ CONFIG_MTD_PHYSMAP_OF=y
# LPDDR flash memory drivers
#
# CONFIG_MTD_LPDDR is not set
-# CONFIG_MTD_QINFO_PROBE is not set
#
# UBI - Unsorted block images
@@ -489,19 +501,27 @@ CONFIG_BLK_DEV_RAM_SIZE=131072
# CONFIG_BLK_DEV_HD is not set
CONFIG_MISC_DEVICES=y
# CONFIG_PHANTOM is not set
-# CONFIG_EEPROM_93CX6 is not set
# CONFIG_SGI_IOC4 is not set
# CONFIG_TIFM_CORE is not set
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
+
+#
+# EEPROM support
+#
+# CONFIG_EEPROM_AT24 is not set
+# CONFIG_EEPROM_LEGACY is not set
+# CONFIG_EEPROM_93CX6 is not set
CONFIG_HAVE_IDE=y
CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
CONFIG_IDE_GD_ATA=y
@@ -605,9 +625,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -630,6 +652,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
CONFIG_ATA=y
# CONFIG_ATA_NONSTANDARD is not set
CONFIG_SATA_PMP=y
@@ -707,6 +730,7 @@ CONFIG_MACINTOSH_DRIVERS=y
# CONFIG_MAC_EMUMOUSEBTN is not set
# CONFIG_WINDFARM is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -740,6 +764,8 @@ CONFIG_MII=y
# CONFIG_SUNGEM is not set
# CONFIG_CASSINI is not set
# CONFIG_NET_VENDOR_3COM is not set
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_NET_TULIP is not set
# CONFIG_HP100 is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
@@ -781,6 +807,7 @@ CONFIG_E1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -795,6 +822,7 @@ CONFIG_MV643XX_ETH=y
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
+# CONFIG_ATL1C is not set
# CONFIG_JME is not set
CONFIG_NETDEV_10000=y
# CONFIG_CHELSIO_T1 is not set
@@ -804,6 +832,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_IXGBE is not set
# CONFIG_IXGB is not set
# CONFIG_S2IO is not set
+# CONFIG_VXGE is not set
# CONFIG_MYRI10GE is not set
# CONFIG_NETXEN_NIC is not set
# CONFIG_NIU is not set
@@ -813,6 +842,7 @@ CONFIG_CHELSIO_T3_DEPENDS=y
# CONFIG_BNX2X is not set
# CONFIG_QLGE is not set
# CONFIG_SFC is not set
+# CONFIG_BE2NET is not set
# CONFIG_TR is not set
#
@@ -820,7 +850,6 @@ CONFIG_CHELSIO_T3_DEPENDS=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -975,12 +1004,9 @@ CONFIG_I2C_MV64XXX=y
# Miscellaneous I2C Chip support
#
# CONFIG_DS1682 is not set
-# CONFIG_EEPROM_AT24 is not set
-# CONFIG_EEPROM_LEGACY is not set
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -1012,6 +1038,7 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_F71805F is not set
# CONFIG_SENSORS_F71882FG is not set
# CONFIG_SENSORS_F75375S is not set
+# CONFIG_SENSORS_G760A is not set
# CONFIG_SENSORS_GL518SM is not set
# CONFIG_SENSORS_GL520SM is not set
# CONFIG_SENSORS_IT87 is not set
@@ -1026,11 +1053,14 @@ CONFIG_HWMON=y
# CONFIG_SENSORS_LM90 is not set
# CONFIG_SENSORS_LM92 is not set
# CONFIG_SENSORS_LM93 is not set
+# CONFIG_SENSORS_LTC4215 is not set
# CONFIG_SENSORS_LTC4245 is not set
+# CONFIG_SENSORS_LM95241 is not set
# CONFIG_SENSORS_MAX1619 is not set
# CONFIG_SENSORS_MAX6650 is not set
# CONFIG_SENSORS_PC87360 is not set
# CONFIG_SENSORS_PC87427 is not set
+# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_SIS5595 is not set
# CONFIG_SENSORS_DME1737 is not set
# CONFIG_SENSORS_SMSC47M1 is not set
@@ -1127,15 +1157,17 @@ CONFIG_USB_HID=y
#
# Special HID drivers
#
-CONFIG_HID_COMPAT=y
CONFIG_HID_A4TECH=y
CONFIG_HID_APPLE=y
CONFIG_HID_BELKIN=y
CONFIG_HID_CHERRY=y
CONFIG_HID_CHICONY=y
CONFIG_HID_CYPRESS=y
+# CONFIG_DRAGONRISE_FF is not set
CONFIG_HID_EZKEY=y
+CONFIG_HID_KYE=y
CONFIG_HID_GYRATION=y
+CONFIG_HID_KENSINGTON=y
CONFIG_HID_LOGITECH=y
# CONFIG_LOGITECH_FF is not set
# CONFIG_LOGIRUMBLEPAD2_FF is not set
@@ -1202,11 +1234,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
# CONFIG_USB_STORAGE is not set
# CONFIG_USB_LIBUSUAL is not set
@@ -1236,7 +1268,6 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1252,6 +1283,7 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1313,8 +1345,9 @@ CONFIG_RTC_DRV_MAX6900=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1325,6 +1358,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1348,6 +1382,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1391,6 +1430,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
# CONFIG_NFS_V3 is not set
@@ -1400,7 +1440,6 @@ CONFIG_ROOT_NFS=y
CONFIG_LOCKD=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
# CONFIG_RPCSEC_GSS_KRB5 is not set
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1432,6 +1471,7 @@ CONFIG_MSDOS_PARTITION=y
# CONFIG_SYSV68_PARTITION is not set
# CONFIG_NLS is not set
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1445,11 +1485,15 @@ CONFIG_CRC_T10DIF=y
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_PLIST=y
+CONFIG_ZLIB_INFLATE=y
+CONFIG_DECOMPRESS_GZIP=y
+CONFIG_DECOMPRESS_BZIP2=y
+CONFIG_DECOMPRESS_LZMA=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1471,13 +1515,24 @@ CONFIG_DEBUG_MEMORY_INIT=y
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
@@ -1569,6 +1624,7 @@ CONFIG_CRYPTO=y
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
# CONFIG_CRYPTO_LZO is not set
#
diff --git a/arch/powerpc/configs/ps3_defconfig b/arch/powerpc/configs/ps3_defconfig
index ac14f5245d2..e28e65e7a0e 100644
--- a/arch/powerpc/configs/ps3_defconfig
+++ b/arch/powerpc/configs/ps3_defconfig
@@ -1,13 +1,14 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc8
-# Fri Mar 13 09:28:45 2009
+# Linux kernel version: 2.6.30-rc5
+# Fri May 15 10:37:00 2009
#
CONFIG_PPC64=y
#
# Processor support
#
+CONFIG_PPC_BOOK3S=y
# CONFIG_POWER4_ONLY is not set
CONFIG_POWER3=y
CONFIG_POWER4=y
@@ -55,9 +56,11 @@ CONFIG_OF=y
# CONFIG_GENERIC_TBSYNC is not set
CONFIG_AUDIT_ARCH=y
CONFIG_GENERIC_BUG=y
+CONFIG_DTC=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -72,6 +75,7 @@ CONFIG_SWAP=y
CONFIG_SYSVIPC=y
CONFIG_SYSVIPC_SYSCTL=y
CONFIG_POSIX_MQUEUE=y
+CONFIG_POSIX_MQUEUE_SYSCTL=y
# CONFIG_BSD_PROCESS_ACCT is not set
# CONFIG_TASKSTATS is not set
# CONFIG_AUDIT is not set
@@ -88,8 +92,7 @@ CONFIG_CLASSIC_RCU=y
CONFIG_LOG_BUF_SHIFT=17
# CONFIG_GROUP_SCHED is not set
# CONFIG_CGROUPS is not set
-CONFIG_SYSFS_DEPRECATED=y
-CONFIG_SYSFS_DEPRECATED_V2=y
+# CONFIG_SYSFS_DEPRECATED_V2 is not set
# CONFIG_RELAY is not set
CONFIG_NAMESPACES=y
# CONFIG_UTS_NS is not set
@@ -99,6 +102,9 @@ CONFIG_NAMESPACES=y
# CONFIG_NET_NS is not set
CONFIG_BLK_DEV_INITRD=y
CONFIG_INITRAMFS_SOURCE=""
+CONFIG_RD_GZIP=y
+# CONFIG_RD_BZIP2 is not set
+# CONFIG_RD_LZMA is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
CONFIG_ANON_INODES=y
@@ -107,6 +113,7 @@ CONFIG_SYSCTL_SYSCALL=y
CONFIG_KALLSYMS=y
CONFIG_KALLSYMS_ALL=y
CONFIG_KALLSYMS_EXTRA_PASS=y
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
@@ -138,6 +145,7 @@ CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
CONFIG_HAVE_DMA_ATTRS=y
CONFIG_USE_GENERIC_SMP_HELPERS=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -150,7 +158,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_STOP_MACHINE=y
CONFIG_BLOCK=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
CONFIG_BLK_DEV_BSG=y
# CONFIG_BLK_DEV_INTEGRITY is not set
CONFIG_BLOCK_COMPAT=y
@@ -172,7 +179,6 @@ CONFIG_DEFAULT_IOSCHED="anticipatory"
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
# CONFIG_PPC_PSERIES is not set
# CONFIG_PPC_ISERIES is not set
# CONFIG_PPC_PMAC is not set
@@ -209,6 +215,7 @@ CONFIG_SPU_FS_64K_LS=y
# CONFIG_SPU_TRACE is not set
CONFIG_SPU_BASE=y
# CONFIG_PQ2ADS is not set
+# CONFIG_PPC_OF_BOOT_TRAMPOLINE is not set
# CONFIG_IPIC is not set
# CONFIG_MPIC is not set
# CONFIG_MPIC_WEIRD is not set
@@ -279,11 +286,14 @@ CONFIG_PHYS_ADDR_T_64BIT=y
CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_ARCH_MEMORY_PROBE=y
CONFIG_PPC_HAS_HASH_64K=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=13
CONFIG_SCHED_SMT=y
CONFIG_PROC_DEVICETREE=y
@@ -316,7 +326,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=y
CONFIG_PACKET_MMAP=y
CONFIG_UNIX=y
@@ -389,6 +398,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -396,6 +406,7 @@ CONFIG_IPV6_NDISC_NODETYPE=y
# Network testing
#
# CONFIG_NET_PKTGEN is not set
+# CONFIG_NET_DROP_MONITOR is not set
# CONFIG_HAMRADIO is not set
# CONFIG_CAN is not set
# CONFIG_IRDA is not set
@@ -419,11 +430,9 @@ CONFIG_BT_HCIBTUSB=m
# CONFIG_BT_HCIBFUSB is not set
# CONFIG_BT_HCIVHCI is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
CONFIG_CFG80211=m
# CONFIG_CFG80211_REG_DEBUG is not set
-CONFIG_NL80211=y
# CONFIG_WIRELESS_OLD_REGULATORY is not set
CONFIG_WIRELESS_EXT=y
# CONFIG_WIRELESS_EXT_SYSFS is not set
@@ -602,6 +611,7 @@ CONFIG_SCSI_WAIT_SCAN=m
# CONFIG_SCSI_SRP_ATTRS is not set
# CONFIG_SCSI_LOWLEVEL is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
# CONFIG_BLK_DEV_MD is not set
@@ -616,6 +626,7 @@ CONFIG_BLK_DEV_DM=m
# CONFIG_DM_UEVENT is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
# CONFIG_DUMMY is not set
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -625,6 +636,8 @@ CONFIG_NETDEVICES=y
# CONFIG_PHYLIB is not set
CONFIG_NET_ETHERNET=y
CONFIG_MII=m
+# CONFIG_ETHOC is not set
+# CONFIG_DNET is not set
# CONFIG_IBM_NEW_EMAC_ZMII is not set
# CONFIG_IBM_NEW_EMAC_RGMII is not set
# CONFIG_IBM_NEW_EMAC_TAH is not set
@@ -646,12 +659,13 @@ CONFIG_GELIC_WIRELESS_OLD_PSK_INTERFACE=y
CONFIG_WLAN_80211=y
# CONFIG_LIBERTAS is not set
# CONFIG_LIBERTAS_THINFIRM is not set
+# CONFIG_AT76C50X_USB is not set
# CONFIG_USB_ZD1201 is not set
# CONFIG_USB_NET_RNDIS_WLAN is not set
# CONFIG_RTL8187 is not set
# CONFIG_MAC80211_HWSIM is not set
# CONFIG_P54_COMMON is not set
-# CONFIG_IWLWIFI_LEDS is not set
+# CONFIG_AR9170_USB is not set
# CONFIG_HOSTAP is not set
# CONFIG_B43 is not set
# CONFIG_B43LEGACY is not set
@@ -673,6 +687,7 @@ CONFIG_USB_PEGASUS=m
CONFIG_USB_USBNET=m
CONFIG_USB_NET_AX8817X=m
# CONFIG_USB_NET_CDCETHER is not set
+# CONFIG_USB_NET_CDC_EEM is not set
# CONFIG_USB_NET_DM9601 is not set
# CONFIG_USB_NET_SMSC95XX is not set
# CONFIG_USB_NET_GL620A is not set
@@ -724,28 +739,7 @@ CONFIG_INPUT_EVDEV=m
#
# CONFIG_INPUT_KEYBOARD is not set
# CONFIG_INPUT_MOUSE is not set
-CONFIG_INPUT_JOYSTICK=y
-# CONFIG_JOYSTICK_ANALOG is not set
-# CONFIG_JOYSTICK_A3D is not set
-# CONFIG_JOYSTICK_ADI is not set
-# CONFIG_JOYSTICK_COBRA is not set
-# CONFIG_JOYSTICK_GF2K is not set
-# CONFIG_JOYSTICK_GRIP is not set
-# CONFIG_JOYSTICK_GRIP_MP is not set
-# CONFIG_JOYSTICK_GUILLEMOT is not set
-# CONFIG_JOYSTICK_INTERACT is not set
-# CONFIG_JOYSTICK_SIDEWINDER is not set
-# CONFIG_JOYSTICK_TMDC is not set
-# CONFIG_JOYSTICK_IFORCE is not set
-# CONFIG_JOYSTICK_WARRIOR is not set
-# CONFIG_JOYSTICK_MAGELLAN is not set
-# CONFIG_JOYSTICK_SPACEORB is not set
-# CONFIG_JOYSTICK_SPACEBALL is not set
-# CONFIG_JOYSTICK_STINGER is not set
-# CONFIG_JOYSTICK_TWIDJOY is not set
-# CONFIG_JOYSTICK_ZHENHUA is not set
-# CONFIG_JOYSTICK_JOYDUMP is not set
-# CONFIG_JOYSTICK_XPAD is not set
+# CONFIG_INPUT_JOYSTICK is not set
# CONFIG_INPUT_TABLET is not set
# CONFIG_INPUT_TOUCHSCREEN is not set
# CONFIG_INPUT_MISC is not set
@@ -864,6 +858,7 @@ CONFIG_FB_PS3_DEFAULT_SIZE_M=9
# CONFIG_FB_VIRTUAL is not set
# CONFIG_FB_METRONOME is not set
# CONFIG_FB_MB862XX is not set
+# CONFIG_FB_BROADSHEET is not set
# CONFIG_BACKLIGHT_LCD_SUPPORT is not set
#
@@ -934,15 +929,17 @@ CONFIG_USB_HIDDEV=y
#
# Special HID drivers
#
-# CONFIG_HID_COMPAT is not set
# CONFIG_HID_A4TECH is not set
# CONFIG_HID_APPLE is not set
# CONFIG_HID_BELKIN is not set
# CONFIG_HID_CHERRY is not set
# CONFIG_HID_CHICONY is not set
# CONFIG_HID_CYPRESS is not set
+# CONFIG_DRAGONRISE_FF is not set
# CONFIG_HID_EZKEY is not set
+# CONFIG_HID_KYE is not set
# CONFIG_HID_GYRATION is not set
+# CONFIG_HID_KENSINGTON is not set
# CONFIG_HID_LOGITECH is not set
# CONFIG_HID_MICROSOFT is not set
# CONFIG_HID_MONTEREY is not set
@@ -950,7 +947,7 @@ CONFIG_USB_HIDDEV=y
# CONFIG_HID_PANTHERLORD is not set
# CONFIG_HID_PETALYNX is not set
# CONFIG_HID_SAMSUNG is not set
-# CONFIG_HID_SONY is not set
+CONFIG_HID_SONY=m
# CONFIG_HID_SUNPLUS is not set
# CONFIG_GREENASIA_FF is not set
# CONFIG_HID_TOPSEED is not set
@@ -1012,11 +1009,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=m
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -1058,7 +1055,6 @@ CONFIG_USB_STORAGE=m
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1074,6 +1070,7 @@ CONFIG_USB_STORAGE=m
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
# CONFIG_NEW_LEDS is not set
@@ -1113,8 +1110,10 @@ CONFIG_RTC_INTF_DEV=y
#
# on-CPU RTC drivers
#
-CONFIG_RTC_DRV_PPC=m
+# CONFIG_RTC_DRV_GENERIC is not set
+CONFIG_RTC_DRV_PS3=m
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1125,6 +1124,7 @@ CONFIG_EXT2_FS=m
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=m
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1161,6 +1161,11 @@ CONFIG_AUTOFS4_FS=m
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
CONFIG_ISO9660_FS=m
@@ -1211,6 +1216,7 @@ CONFIG_MISC_FILESYSTEMS=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
CONFIG_NETWORK_FILESYSTEMS=y
CONFIG_NFS_FS=y
CONFIG_NFS_V3=y
@@ -1223,7 +1229,6 @@ CONFIG_LOCKD_V4=y
CONFIG_NFS_COMMON=y
CONFIG_SUNRPC=y
CONFIG_SUNRPC_GSS=y
-# CONFIG_SUNRPC_REGISTER_V4 is not set
CONFIG_RPCSEC_GSS_KRB5=y
# CONFIG_RPCSEC_GSS_SPKM3 is not set
# CONFIG_SMB_FS is not set
@@ -1283,6 +1288,7 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_KOI8_U is not set
# CONFIG_NLS_UTF8 is not set
# CONFIG_DLM is not set
+CONFIG_BINARY_PRINTF=y
#
# Library routines
@@ -1296,15 +1302,16 @@ CONFIG_CRC_ITU_T=m
CONFIG_CRC32=y
# CONFIG_CRC7 is not set
# CONFIG_LIBCRC32C is not set
-CONFIG_ZLIB_INFLATE=m
+CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=m
CONFIG_LZO_COMPRESS=m
CONFIG_LZO_DECOMPRESS=m
-CONFIG_PLIST=y
+CONFIG_DECOMPRESS_GZIP=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1322,6 +1329,9 @@ CONFIG_DEBUG_KERNEL=y
CONFIG_DETECT_SOFTLOCKUP=y
# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set
CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0
+CONFIG_DETECT_HUNG_TASK=y
+# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set
+CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0
CONFIG_SCHED_DEBUG=y
# CONFIG_SCHEDSTATS is not set
# CONFIG_TIMER_STATS is not set
@@ -1357,12 +1367,15 @@ CONFIG_DEBUG_LIST=y
# CONFIG_FAULT_INJECTION is not set
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
+# CONFIG_DEBUG_PAGEALLOC is not set
CONFIG_NOP_TRACER=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
CONFIG_RING_BUFFER=y
CONFIG_TRACING=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
@@ -1371,18 +1384,21 @@ CONFIG_TRACING=y
# CONFIG_IRQSOFF_TRACER is not set
# CONFIG_SCHED_TRACER is not set
# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
# CONFIG_BOOT_TRACER is not set
# CONFIG_TRACE_BRANCH_PROFILING is not set
# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_FTRACE_STARTUP_TEST is not set
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_DYNAMIC_DEBUG is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
# CONFIG_KGDB is not set
CONFIG_PRINT_STACK_DEPTH=64
CONFIG_DEBUG_STACKOVERFLOW=y
# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_PAGEALLOC is not set
# CONFIG_CODE_PATCHING_SELFTEST is not set
# CONFIG_FTR_FIXUP_SELFTEST is not set
# CONFIG_MSI_BITMAP_SELFTEST is not set
@@ -1415,10 +1431,12 @@ CONFIG_CRYPTO_HASH=y
CONFIG_CRYPTO_HASH2=y
CONFIG_CRYPTO_RNG=m
CONFIG_CRYPTO_RNG2=y
+CONFIG_CRYPTO_PCOMP=y
CONFIG_CRYPTO_MANAGER=y
CONFIG_CRYPTO_MANAGER2=y
CONFIG_CRYPTO_GF128MUL=m
# CONFIG_CRYPTO_NULL is not set
+CONFIG_CRYPTO_WORKQUEUE=y
# CONFIG_CRYPTO_CRYPTD is not set
# CONFIG_CRYPTO_AUTHENC is not set
# CONFIG_CRYPTO_TEST is not set
@@ -1487,6 +1505,7 @@ CONFIG_CRYPTO_SALSA20=m
# Compression
#
# CONFIG_CRYPTO_DEFLATE is not set
+# CONFIG_CRYPTO_ZLIB is not set
CONFIG_CRYPTO_LZO=m
#
diff --git a/arch/powerpc/configs/storcenter_defconfig b/arch/powerpc/configs/storcenter_defconfig
index 94903465ea1..bd4a8d435c5 100644
--- a/arch/powerpc/configs/storcenter_defconfig
+++ b/arch/powerpc/configs/storcenter_defconfig
@@ -1,7 +1,7 @@
#
# Automatically generated make config: don't edit
-# Linux kernel version: 2.6.29-rc6
-# Fri Mar 6 00:09:08 2009
+# Linux kernel version: 2.6.30-rc3
+# Wed May 13 17:22:04 2009
#
# CONFIG_PPC64 is not set
@@ -14,6 +14,7 @@ CONFIG_6xx=y
# CONFIG_40x is not set
# CONFIG_44x is not set
# CONFIG_E200 is not set
+CONFIG_PPC_BOOK3S=y
CONFIG_PPC_FPU=y
# CONFIG_ALTIVEC is not set
CONFIG_PPC_STD_MMU=y
@@ -54,6 +55,7 @@ CONFIG_GENERIC_BUG=y
# CONFIG_DEFAULT_UIMAGE is not set
# CONFIG_PPC_DCR_NATIVE is not set
# CONFIG_PPC_DCR_MMIO is not set
+CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y
CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config"
#
@@ -95,17 +97,17 @@ CONFIG_SYSFS_DEPRECATED_V2=y
# CONFIG_BLK_DEV_INITRD is not set
CONFIG_CC_OPTIMIZE_FOR_SIZE=y
CONFIG_SYSCTL=y
+CONFIG_ANON_INODES=y
CONFIG_EMBEDDED=y
CONFIG_SYSCTL_SYSCALL=y
# CONFIG_KALLSYMS is not set
+# CONFIG_STRIP_ASM_SYMS is not set
CONFIG_HOTPLUG=y
CONFIG_PRINTK=y
CONFIG_BUG=y
CONFIG_ELF_CORE=y
-CONFIG_COMPAT_BRK=y
CONFIG_BASE_FULL=y
CONFIG_FUTEX=y
-CONFIG_ANON_INODES=y
CONFIG_EPOLL=y
CONFIG_SIGNALFD=y
CONFIG_TIMERFD=y
@@ -115,16 +117,19 @@ CONFIG_AIO=y
CONFIG_VM_EVENT_COUNTERS=y
CONFIG_PCI_QUIRKS=y
CONFIG_SLUB_DEBUG=y
+CONFIG_COMPAT_BRK=y
# CONFIG_SLAB is not set
CONFIG_SLUB=y
# CONFIG_SLOB is not set
# CONFIG_PROFILING is not set
+# CONFIG_MARKERS is not set
CONFIG_HAVE_OPROFILE=y
CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
CONFIG_HAVE_IOREMAP_PROT=y
CONFIG_HAVE_KPROBES=y
CONFIG_HAVE_KRETPROBES=y
CONFIG_HAVE_ARCH_TRACEHOOK=y
+# CONFIG_SLOW_WORK is not set
# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set
CONFIG_SLABINFO=y
CONFIG_RT_MUTEXES=y
@@ -137,7 +142,6 @@ CONFIG_MODULE_UNLOAD=y
# CONFIG_MODULE_SRCVERSION_ALL is not set
CONFIG_BLOCK=y
CONFIG_LBD=y
-# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_BLK_DEV_BSG is not set
# CONFIG_BLK_DEV_INTEGRITY is not set
@@ -158,8 +162,6 @@ CONFIG_DEFAULT_IOSCHED="cfq"
#
# Platform support
#
-CONFIG_PPC_MULTIPLATFORM=y
-CONFIG_CLASSIC32=y
# CONFIG_PPC_CHRP is not set
# CONFIG_MPC5121_ADS is not set
# CONFIG_MPC5121_GENERIC is not set
@@ -181,6 +183,8 @@ CONFIG_STORCENTER=y
CONFIG_MPC10X_BRIDGE=y
CONFIG_MPC10X_OPENPIC=y
# CONFIG_MPC10X_STORE_GATHERING is not set
+# CONFIG_AMIGAONE is not set
+CONFIG_PPC_OF_BOOT_TRAMPOLINE=y
# CONFIG_IPIC is not set
CONFIG_MPIC=y
# CONFIG_MPIC_WEIRD is not set
@@ -239,9 +243,12 @@ CONFIG_ZONE_DMA_FLAG=1
CONFIG_BOUNCE=y
CONFIG_VIRT_TO_BUS=y
CONFIG_UNEVICTABLE_LRU=y
+CONFIG_HAVE_MLOCK=y
+CONFIG_HAVE_MLOCKED_PAGE_BIT=y
CONFIG_PPC_4K_PAGES=y
# CONFIG_PPC_16K_PAGES is not set
# CONFIG_PPC_64K_PAGES is not set
+# CONFIG_PPC_256K_PAGES is not set
CONFIG_FORCE_MAX_ZONEORDER=11
CONFIG_PROC_DEVICETREE=y
CONFIG_CMDLINE_BOOL=y
@@ -266,6 +273,7 @@ CONFIG_ARCH_SUPPORTS_MSI=y
# CONFIG_PCI_MSI is not set
# CONFIG_PCI_LEGACY is not set
# CONFIG_PCI_STUB is not set
+# CONFIG_PCI_IOV is not set
# CONFIG_PCCARD is not set
# CONFIG_HOTPLUG_PCI is not set
# CONFIG_HAS_RAPIDIO is not set
@@ -288,7 +296,6 @@ CONFIG_NET=y
#
# Networking options
#
-CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_PACKET=m
# CONFIG_PACKET_MMAP is not set
CONFIG_UNIX=y
@@ -339,6 +346,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_LAPB is not set
# CONFIG_ECONET is not set
# CONFIG_WAN_ROUTER is not set
+# CONFIG_PHONET is not set
# CONFIG_NET_SCHED is not set
# CONFIG_DCB is not set
@@ -351,7 +359,6 @@ CONFIG_DEFAULT_TCP_CONG="cubic"
# CONFIG_IRDA is not set
# CONFIG_BT is not set
# CONFIG_AF_RXRPC is not set
-# CONFIG_PHONET is not set
CONFIG_WIRELESS=y
# CONFIG_CFG80211 is not set
CONFIG_WIRELESS_OLD_REGULATORY=y
@@ -486,6 +493,7 @@ CONFIG_MISC_DEVICES=y
# CONFIG_ICS932S401 is not set
# CONFIG_ENCLOSURE_SERVICES is not set
# CONFIG_HP_ILO is not set
+# CONFIG_ISL29003 is not set
# CONFIG_C2PORT is not set
#
@@ -500,6 +508,7 @@ CONFIG_IDE=y
#
# Please see Documentation/ide/ide.txt for help/info on IDE drives
#
+CONFIG_IDE_XFER_MODE=y
CONFIG_IDE_TIMINGS=y
# CONFIG_BLK_DEV_IDE_SATA is not set
CONFIG_IDE_GD=y
@@ -604,9 +613,11 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_MEGARAID_NEWGEN is not set
# CONFIG_MEGARAID_LEGACY is not set
# CONFIG_MEGARAID_SAS is not set
+# CONFIG_SCSI_MPT2SAS is not set
# CONFIG_SCSI_HPTIOP is not set
# CONFIG_SCSI_BUSLOGIC is not set
# CONFIG_LIBFC is not set
+# CONFIG_LIBFCOE is not set
# CONFIG_FCOE is not set
# CONFIG_SCSI_DMX3191D is not set
# CONFIG_SCSI_EATA is not set
@@ -628,6 +639,7 @@ CONFIG_SCSI_LOWLEVEL=y
# CONFIG_SCSI_DEBUG is not set
# CONFIG_SCSI_SRP is not set
# CONFIG_SCSI_DH is not set
+# CONFIG_SCSI_OSD_INITIATOR is not set
# CONFIG_ATA is not set
CONFIG_MD=y
CONFIG_BLK_DEV_MD=y
@@ -637,7 +649,7 @@ CONFIG_MD_RAID0=y
CONFIG_MD_RAID1=y
# CONFIG_MD_RAID10 is not set
CONFIG_MD_RAID456=y
-CONFIG_MD_RAID5_RESHAPE=y
+CONFIG_MD_RAID6_PQ=y
# CONFIG_MD_MULTIPATH is not set
# CONFIG_MD_FAULTY is not set
# CONFIG_BLK_DEV_DM is not set
@@ -655,6 +667,7 @@ CONFIG_MD_RAID5_RESHAPE=y
# CONFIG_I2O is not set
# CONFIG_MACINTOSH_DRIVERS is not set
CONFIG_NETDEVICES=y
+CONFIG_COMPAT_NET_DEV_OPS=y
CONFIG_DUMMY=m
# CONFIG_BONDING is not set
# CONFIG_MACVLAN is not set
@@ -671,6 +684,7 @@ CONFIG_NETDEV_1000=y
# CONFIG_E1000E is not set
# CONFIG_IP1000 is not set
# CONFIG_IGB is not set
+# CONFIG_IGBVF is not set
# CONFIG_NS83820 is not set
# CONFIG_HAMACHI is not set
# CONFIG_YELLOWFIN is not set
@@ -681,8 +695,8 @@ CONFIG_R8169=y
# CONFIG_VIA_VELOCITY is not set
# CONFIG_TIGON3 is not set
# CONFIG_BNX2 is not set
+# CONFIG_FSL_PQ_MDIO is not set
# CONFIG_GIANFAR is not set
-# CONFIG_MV643XX_ETH is not set
# CONFIG_QLA3XXX is not set
# CONFIG_ATL1 is not set
# CONFIG_ATL1E is not set
@@ -696,7 +710,6 @@ CONFIG_R8169=y
#
# CONFIG_WLAN_PRE80211 is not set
# CONFIG_WLAN_80211 is not set
-# CONFIG_IWLWIFI_LEDS is not set
#
# Enable WiMAX (Networking options) to see the WiMAX drivers
@@ -766,6 +779,7 @@ CONFIG_LEGACY_PTY_COUNT=256
# CONFIG_HVC_UDBG is not set
# CONFIG_IPMI_HANDLER is not set
CONFIG_HW_RANDOM=m
+# CONFIG_HW_RANDOM_TIMERIOMEM is not set
CONFIG_NVRAM=y
# CONFIG_R3964 is not set
# CONFIG_APPLICOM is not set
@@ -831,7 +845,6 @@ CONFIG_I2C_MPC=y
# CONFIG_SENSORS_PCF8574 is not set
# CONFIG_PCF8575 is not set
# CONFIG_SENSORS_PCA9539 is not set
-# CONFIG_SENSORS_PCF8591 is not set
# CONFIG_SENSORS_MAX6875 is not set
# CONFIG_SENSORS_TSL2550 is not set
# CONFIG_I2C_DEBUG_CORE is not set
@@ -952,11 +965,11 @@ CONFIG_USB_OHCI_LITTLE_ENDIAN=y
# CONFIG_USB_TMC is not set
#
-# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed;
+# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may
#
#
-# see USB_STORAGE Help for more information
+# also be needed; see USB_STORAGE Help for more info
#
CONFIG_USB_STORAGE=y
# CONFIG_USB_STORAGE_DEBUG is not set
@@ -997,7 +1010,6 @@ CONFIG_USB_STORAGE=y
# CONFIG_USB_LED is not set
# CONFIG_USB_CYPRESS_CY7C63 is not set
# CONFIG_USB_CYTHERM is not set
-# CONFIG_USB_PHIDGET is not set
# CONFIG_USB_IDMOUSE is not set
# CONFIG_USB_FTDI_ELAN is not set
# CONFIG_USB_APPLEDISPLAY is not set
@@ -1013,6 +1025,7 @@ CONFIG_USB_STORAGE=y
#
# OTG and related infrastructure
#
+# CONFIG_NOP_USB_XCEIV is not set
# CONFIG_UWB is not set
# CONFIG_MMC is not set
# CONFIG_MEMSTICK is not set
@@ -1074,8 +1087,9 @@ CONFIG_RTC_DRV_DS1307=y
#
# on-CPU RTC drivers
#
-# CONFIG_RTC_DRV_PPC is not set
+# CONFIG_RTC_DRV_GENERIC is not set
# CONFIG_DMADEVICES is not set
+# CONFIG_AUXDISPLAY is not set
# CONFIG_UIO is not set
# CONFIG_STAGING is not set
@@ -1086,6 +1100,7 @@ CONFIG_EXT2_FS=y
# CONFIG_EXT2_FS_XATTR is not set
# CONFIG_EXT2_FS_XIP is not set
CONFIG_EXT3_FS=y
+# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set
CONFIG_EXT3_FS_XATTR=y
# CONFIG_EXT3_FS_POSIX_ACL is not set
# CONFIG_EXT3_FS_SECURITY is not set
@@ -1113,6 +1128,11 @@ CONFIG_INOTIFY_USER=y
# CONFIG_FUSE_FS is not set
#
+# Caches
+#
+# CONFIG_FSCACHE is not set
+
+#
# CD-ROM/DVD Filesystems
#
# CONFIG_ISO9660_FS is not set
@@ -1166,6 +1186,7 @@ CONFIG_JFFS2_RTIME=y
# CONFIG_ROMFS_FS is not set
# CONFIG_SYSV_FS is not set
# CONFIG_UFS_FS is not set
+# CONFIG_NILFS2_FS is not set
# CONFIG_NETWORK_FILESYSTEMS is not set
CONFIG_EXPORTFS=m
@@ -1231,6 +1252,7 @@ CONFIG_NLS_ISO8859_1=y
# CONFIG_NLS_KOI8_U is not set
CONFIG_NLS_UTF8=y
# CONFIG_DLM is not set
+# CONFIG_BINARY_PRINTF is not set
#
# Library routines
@@ -1246,11 +1268,11 @@ CONFIG_CRC32=y
# CONFIG_LIBCRC32C is not set
CONFIG_ZLIB_INFLATE=y
CONFIG_ZLIB_DEFLATE=y
-CONFIG_PLIST=y
CONFIG_HAS_IOMEM=y
CONFIG_HAS_IOPORT=y
CONFIG_HAS_DMA=y
CONFIG_HAVE_LMB=y
+CONFIG_NLATTR=y
#
# Kernel hacking
@@ -1272,13 +1294,24 @@ CONFIG_FRAME_WARN=1024
# CONFIG_LATENCYTOP is not set
CONFIG_SYSCTL_SYSCALL_CHECK=y
CONFIG_HAVE_FUNCTION_TRACER=y
+CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
CONFIG_HAVE_DYNAMIC_FTRACE=y
CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
+CONFIG_TRACING_SUPPORT=y
#
# Tracers
#
-# CONFIG_DYNAMIC_PRINTK_DEBUG is not set
+# CONFIG_FUNCTION_TRACER is not set
+# CONFIG_SCHED_TRACER is not set
+# CONFIG_CONTEXT_SWITCH_TRACER is not set
+# CONFIG_EVENT_TRACER is not set
+# CONFIG_BOOT_TRACER is not set
+# CONFIG_TRACE_BRANCH_PROFILING is not set
+# CONFIG_STACK_TRACER is not set
+# CONFIG_KMEMTRACE is not set
+# CONFIG_WORKQUEUE_TRACER is not set
+# CONFIG_BLK_DEV_IO_TRACE is not set
# CONFIG_SAMPLES is not set
CONFIG_HAVE_ARCH_KGDB=y
CONFIG_PRINT_STACK_DEPTH=64
diff --git a/arch/powerpc/include/asm/iseries/iommu.h b/arch/powerpc/include/asm/iseries/iommu.h
index c59ee7e4bed..1b9692c6089 100644
--- a/arch/powerpc/include/asm/iseries/iommu.h
+++ b/arch/powerpc/include/asm/iseries/iommu.h
@@ -26,10 +26,6 @@ struct vio_dev;
struct device_node;
struct iommu_table;
-/* Creates table for an individual device node */
-extern void iommu_devnode_init_iSeries(struct pci_dev *pdev,
- struct device_node *dn);
-
/* Get table parameters from HV */
extern void iommu_table_getparms_iSeries(unsigned long busno,
unsigned char slotno, unsigned char virtbus,
diff --git a/arch/powerpc/include/asm/of_platform.h b/arch/powerpc/include/asm/of_platform.h
index 53b46507ffd..d4aaa348944 100644
--- a/arch/powerpc/include/asm/of_platform.h
+++ b/arch/powerpc/include/asm/of_platform.h
@@ -11,16 +11,6 @@
*
*/
-/* Platform drivers register/unregister */
-static inline int of_register_platform_driver(struct of_platform_driver *drv)
-{
- return of_register_driver(drv, &of_platform_bus_type);
-}
-static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
-{
- of_unregister_driver(drv);
-}
-
/* Platform devices and busses creation */
extern struct of_device *of_platform_device_create(struct device_node *np,
const char *bus_id,
diff --git a/arch/powerpc/include/asm/system.h b/arch/powerpc/include/asm/system.h
index f612798e1c9..2b2420a4988 100644
--- a/arch/powerpc/include/asm/system.h
+++ b/arch/powerpc/include/asm/system.h
@@ -212,7 +212,7 @@ extern struct task_struct *_switch(struct thread_struct *prev,
extern unsigned int rtas_data;
extern int mem_init_done; /* set on boot once kmalloc can be called */
extern int init_bootmem_done; /* set on !NUMA once bootmem is available */
-extern unsigned long memory_limit;
+extern phys_addr_t memory_limit;
extern unsigned long klimit;
extern void *alloc_maybe_bootmem(size_t size, gfp_t mask);
diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c
index cd1b687544f..3e33fb933d9 100644
--- a/arch/powerpc/kernel/cputable.c
+++ b/arch/powerpc/kernel/cputable.c
@@ -382,7 +382,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
.icache_bsize = 128,
.dcache_bsize = 128,
.machine_check = machine_check_generic,
- .oprofile_cpu_type = "ppc64/compat-power5+",
+ .oprofile_cpu_type = "ppc64/ibm-compat-v1",
+ .oprofile_type = PPC_OPROFILE_POWER4,
.platform = "power5+",
},
{ /* Power6 */
@@ -416,7 +417,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
.icache_bsize = 128,
.dcache_bsize = 128,
.machine_check = machine_check_generic,
- .oprofile_cpu_type = "ppc64/compat-power6",
+ .oprofile_cpu_type = "ppc64/ibm-compat-v1",
+ .oprofile_type = PPC_OPROFILE_POWER4,
.platform = "power6",
},
{ /* 2.06-compliant processor, i.e. Power7 "architected" mode */
@@ -429,7 +431,8 @@ static struct cpu_spec __initdata cpu_specs[] = {
.icache_bsize = 128,
.dcache_bsize = 128,
.machine_check = machine_check_generic,
- .oprofile_cpu_type = "ppc64/compat-power7",
+ .oprofile_type = PPC_OPROFILE_POWER4,
+ .oprofile_cpu_type = "ppc64/ibm-compat-v1",
.platform = "power7",
},
{ /* Power7 */
@@ -1833,8 +1836,10 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s)
* and, in that case, keep the current value for
* oprofile_cpu_type.
*/
- if (old.oprofile_cpu_type == NULL)
- t->oprofile_cpu_type = s->oprofile_cpu_type;
+ if (old.oprofile_cpu_type != NULL) {
+ t->oprofile_cpu_type = old.oprofile_cpu_type;
+ t->oprofile_type = old.oprofile_type;
+ }
}
*PTRRELOC(&cur_cpu_spec) = &the_cpu_spec;
diff --git a/arch/powerpc/kernel/ftrace.c b/arch/powerpc/kernel/ftrace.c
index 70e2a736be1..2d182f119d1 100644
--- a/arch/powerpc/kernel/ftrace.c
+++ b/arch/powerpc/kernel/ftrace.c
@@ -157,7 +157,7 @@ __ftrace_make_nop(struct module *mod,
* 0xe8, 0x4c, 0x00, 0x28, ld r2,40(r12)
*/
- pr_debug("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc);
+ pr_devel("ip:%lx jumps to %lx r2: %lx", ip, tramp, mod->arch.toc);
/* Find where the trampoline jumps to */
if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
@@ -165,7 +165,7 @@ __ftrace_make_nop(struct module *mod,
return -EFAULT;
}
- pr_debug(" %08x %08x", jmp[0], jmp[1]);
+ pr_devel(" %08x %08x", jmp[0], jmp[1]);
/* verify that this is what we expect it to be */
if (((jmp[0] & 0xffff0000) != 0x3d820000) ||
@@ -181,18 +181,18 @@ __ftrace_make_nop(struct module *mod,
offset = ((unsigned)((unsigned short)jmp[0]) << 16) +
(int)((short)jmp[1]);
- pr_debug(" %x ", offset);
+ pr_devel(" %x ", offset);
/* get the address this jumps too */
tramp = mod->arch.toc + offset + 32;
- pr_debug("toc: %lx", tramp);
+ pr_devel("toc: %lx", tramp);
if (probe_kernel_read(jmp, (void *)tramp, 8)) {
printk(KERN_ERR "Failed to read %lx\n", tramp);
return -EFAULT;
}
- pr_debug(" %08x %08x\n", jmp[0], jmp[1]);
+ pr_devel(" %08x %08x\n", jmp[0], jmp[1]);
ptr = ((unsigned long)jmp[0] << 32) + jmp[1];
@@ -269,7 +269,7 @@ __ftrace_make_nop(struct module *mod,
* 0x4e, 0x80, 0x04, 0x20 bctr
*/
- pr_debug("ip:%lx jumps to %lx", ip, tramp);
+ pr_devel("ip:%lx jumps to %lx", ip, tramp);
/* Find where the trampoline jumps to */
if (probe_kernel_read(jmp, (void *)tramp, sizeof(jmp))) {
@@ -277,7 +277,7 @@ __ftrace_make_nop(struct module *mod,
return -EFAULT;
}
- pr_debug(" %08x %08x ", jmp[0], jmp[1]);
+ pr_devel(" %08x %08x ", jmp[0], jmp[1]);
/* verify that this is what we expect it to be */
if (((jmp[0] & 0xffff0000) != 0x3d600000) ||
@@ -293,7 +293,7 @@ __ftrace_make_nop(struct module *mod,
if (tramp & 0x8000)
tramp -= 0x10000;
- pr_debug(" %lx ", tramp);
+ pr_devel(" %lx ", tramp);
if (tramp != addr) {
printk(KERN_ERR
@@ -402,7 +402,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
/* ld r2,40(r1) */
op[1] = 0xe8410028;
- pr_debug("write to %lx\n", rec->ip);
+ pr_devel("write to %lx\n", rec->ip);
if (probe_kernel_write((void *)ip, op, MCOUNT_INSN_SIZE * 2))
return -EPERM;
@@ -442,7 +442,7 @@ __ftrace_make_call(struct dyn_ftrace *rec, unsigned long addr)
return -EINVAL;
}
- pr_debug("write to %lx\n", rec->ip);
+ pr_devel("write to %lx\n", rec->ip);
if (probe_kernel_write((void *)ip, &op, MCOUNT_INSN_SIZE))
return -EPERM;
@@ -594,7 +594,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
PPC_LONG "2b,4b\n"
".previous"
- : [old] "=r" (old), [faulted] "=r" (faulted)
+ : [old] "=&r" (old), [faulted] "=r" (faulted)
: [parent] "r" (parent), [return_hooker] "r" (return_hooker)
: "memory"
);
diff --git a/arch/powerpc/kernel/machine_kexec.c b/arch/powerpc/kernel/machine_kexec.c
index d59e2b1bdcb..bb3d893a835 100644
--- a/arch/powerpc/kernel/machine_kexec.c
+++ b/arch/powerpc/kernel/machine_kexec.c
@@ -125,8 +125,8 @@ void __init reserve_crashkernel(void)
/* Crash kernel trumps memory limit */
if (memory_limit && memory_limit <= crashk_res.end) {
memory_limit = crashk_res.end + 1;
- printk("Adjusted memory limit for crashkernel, now 0x%lx\n",
- memory_limit);
+ printk("Adjusted memory limit for crashkernel, now 0x%llx\n",
+ (unsigned long long)memory_limit);
}
printk(KERN_INFO "Reserving %ldMB of memory at %ldMB "
diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c
index 9c69e7e145c..4fee63cb53f 100644
--- a/arch/powerpc/kernel/pci-common.c
+++ b/arch/powerpc/kernel/pci-common.c
@@ -1366,12 +1366,17 @@ static void __init pcibios_allocate_resources(int pass)
for_each_pci_dev(dev) {
pci_read_config_word(dev, PCI_COMMAND, &command);
- for (idx = 0; idx < 6; idx++) {
+ for (idx = 0; idx <= PCI_ROM_RESOURCE; idx++) {
r = &dev->resource[idx];
if (r->parent) /* Already allocated */
continue;
if (!r->flags || (r->flags & IORESOURCE_UNSET))
continue; /* Not assigned at all */
+ /* We only allocate ROMs on pass 1 just in case they
+ * have been screwed up by firmware
+ */
+ if (idx == PCI_ROM_RESOURCE )
+ disabled = 1;
if (r->flags & IORESOURCE_IO)
disabled = !(command & PCI_COMMAND_IO);
else
@@ -1382,17 +1387,19 @@ static void __init pcibios_allocate_resources(int pass)
if (pass)
continue;
r = &dev->resource[PCI_ROM_RESOURCE];
- if (r->flags & IORESOURCE_ROM_ENABLE) {
+ if (r->flags) {
/* Turn the ROM off, leave the resource region,
* but keep it unregistered.
*/
u32 reg;
- pr_debug("PCI: Switching off ROM of %s\n",
- pci_name(dev));
- r->flags &= ~IORESOURCE_ROM_ENABLE;
pci_read_config_dword(dev, dev->rom_base_reg, &reg);
- pci_write_config_dword(dev, dev->rom_base_reg,
- reg & ~PCI_ROM_ADDRESS_ENABLE);
+ if (reg & PCI_ROM_ADDRESS_ENABLE) {
+ pr_debug("PCI: Switching off ROM of %s\n",
+ pci_name(dev));
+ r->flags &= ~IORESOURCE_ROM_ENABLE;
+ pci_write_config_dword(dev, dev->rom_base_reg,
+ reg & ~PCI_ROM_ADDRESS_ENABLE);
+ }
}
}
}
diff --git a/arch/powerpc/kernel/pci_64.c b/arch/powerpc/kernel/pci_64.c
index be574fc0d92..96edb6f8bab 100644
--- a/arch/powerpc/kernel/pci_64.c
+++ b/arch/powerpc/kernel/pci_64.c
@@ -64,7 +64,7 @@ static u32 get_int_prop(struct device_node *np, const char *name, u32 def)
return def;
}
-static unsigned int pci_parse_of_flags(u32 addr0)
+static unsigned int pci_parse_of_flags(u32 addr0, int bridge)
{
unsigned int flags = 0;
@@ -75,8 +75,17 @@ static unsigned int pci_parse_of_flags(u32 addr0)
if (addr0 & 0x40000000)
flags |= IORESOURCE_PREFETCH
| PCI_BASE_ADDRESS_MEM_PREFETCH;
+ /* Note: We don't know whether the ROM has been left enabled
+ * by the firmware or not. We mark it as disabled (ie, we do
+ * not set the IORESOURCE_ROM_ENABLE flag) for now rather than
+ * do a config space read, it will be force-enabled if needed
+ */
+ if (!bridge && (addr0 & 0xff) == 0x30)
+ flags |= IORESOURCE_READONLY;
} else if (addr0 & 0x01000000)
flags = IORESOURCE_IO | PCI_BASE_ADDRESS_SPACE_IO;
+ if (flags)
+ flags |= IORESOURCE_SIZEALIGN;
return flags;
}
@@ -95,7 +104,7 @@ static void pci_parse_of_addrs(struct device_node *node, struct pci_dev *dev)
return;
pr_debug(" parse addresses (%d bytes) @ %p\n", proplen, addrs);
for (; proplen >= 20; proplen -= 20, addrs += 5) {
- flags = pci_parse_of_flags(addrs[0]);
+ flags = pci_parse_of_flags(addrs[0], 0);
if (!flags)
continue;
base = of_read_number(&addrs[1], 2);
@@ -293,7 +302,7 @@ void __devinit of_scan_pci_bridge(struct device_node *node,
}
i = 1;
for (; len >= 32; len -= 32, ranges += 8) {
- flags = pci_parse_of_flags(ranges[0]);
+ flags = pci_parse_of_flags(ranges[0], 1);
size = of_read_number(&ranges[6], 2);
if (flags == 0 || size == 0)
continue;
diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c
index 5ec6a9e2393..ce01ff2474d 100644
--- a/arch/powerpc/kernel/prom.c
+++ b/arch/powerpc/kernel/prom.c
@@ -426,7 +426,7 @@ static int __init early_parse_mem(char *p)
return 1;
memory_limit = PAGE_ALIGN(memparse(p, &p));
- DBG("memory limit = 0x%lx\n", memory_limit);
+ DBG("memory limit = 0x%llx\n", (unsigned long long)memory_limit);
return 0;
}
@@ -1160,7 +1160,7 @@ static inline void __init phyp_dump_reserve_mem(void) {}
void __init early_init_devtree(void *params)
{
- unsigned long limit;
+ phys_addr_t limit;
DBG(" -> early_init_devtree(%p)\n", params);
@@ -1204,7 +1204,7 @@ void __init early_init_devtree(void *params)
limit = memory_limit;
if (! limit) {
- unsigned long memsize;
+ phys_addr_t memsize;
/* Ensure that total memory size is page-aligned, because
* otherwise mark_bootmem() gets upset. */
@@ -1218,7 +1218,7 @@ void __init early_init_devtree(void *params)
lmb_analyze();
lmb_dump_all();
- DBG("Phys. mem: %lx\n", lmb_phys_mem_size());
+ DBG("Phys. mem: %llx\n", lmb_phys_mem_size());
/* We may need to relocate the flat tree, do it now.
* FIXME .. and the initrd too? */
diff --git a/arch/powerpc/kernel/vmlinux.lds.S b/arch/powerpc/kernel/vmlinux.lds.S
index a047a6cfca4..8ef8a14abc9 100644
--- a/arch/powerpc/kernel/vmlinux.lds.S
+++ b/arch/powerpc/kernel/vmlinux.lds.S
@@ -264,6 +264,7 @@ SECTIONS
*(.data.page_aligned)
}
+ . = ALIGN(L1_CACHE_BYTES);
.data.cacheline_aligned : AT(ADDR(.data.cacheline_aligned) - LOAD_OFFSET) {
*(.data.cacheline_aligned)
}
diff --git a/arch/powerpc/mm/mem.c b/arch/powerpc/mm/mem.c
index f668fa9ba80..d0602a76bf7 100644
--- a/arch/powerpc/mm/mem.c
+++ b/arch/powerpc/mm/mem.c
@@ -57,7 +57,7 @@
int init_bootmem_done;
int mem_init_done;
-unsigned long memory_limit;
+phys_addr_t memory_limit;
#ifdef CONFIG_HIGHMEM
pte_t *kmap_pte;
diff --git a/arch/powerpc/mm/pgtable.c b/arch/powerpc/mm/pgtable.c
index f5c6fd42265..ae1d67cc090 100644
--- a/arch/powerpc/mm/pgtable.c
+++ b/arch/powerpc/mm/pgtable.c
@@ -219,7 +219,8 @@ int ptep_set_access_flags(struct vm_area_struct *vma, unsigned long address,
entry = do_dcache_icache_coherency(entry);
changed = !pte_same(*(ptep), entry);
if (changed) {
- assert_pte_locked(vma->vm_mm, address);
+ if (!(vma->vm_flags & VM_HUGETLB))
+ assert_pte_locked(vma->vm_mm, address);
__ptep_set_access_flags(ptep, entry);
flush_tlb_page_nohash(vma, address);
}
diff --git a/arch/powerpc/oprofile/op_model_power4.c b/arch/powerpc/oprofile/op_model_power4.c
index 3e3d91f536e..80774092db7 100644
--- a/arch/powerpc/oprofile/op_model_power4.c
+++ b/arch/powerpc/oprofile/op_model_power4.c
@@ -26,6 +26,7 @@
static unsigned long reset_value[OP_MAX_COUNTER];
static int oprofile_running;
+static int use_slot_nums;
/* mmcr values are set in power4_reg_setup, used in power4_cpu_setup */
static u32 mmcr0_val;
@@ -61,6 +62,12 @@ static int power4_reg_setup(struct op_counter_config *ctr,
else
mmcr0_val |= MMCR0_PROBLEM_DISABLE;
+ if (__is_processor(PV_POWER4) || __is_processor(PV_POWER4p) ||
+ __is_processor(PV_970) || __is_processor(PV_970FX) ||
+ __is_processor(PV_970MP) || __is_processor(PV_970GX) ||
+ __is_processor(PV_POWER5) || __is_processor(PV_POWER5p))
+ use_slot_nums = 1;
+
return 0;
}
@@ -206,7 +213,7 @@ static unsigned long get_pc(struct pt_regs *regs)
mmcra = mfspr(SPRN_MMCRA);
- if (mmcra & MMCRA_SAMPLE_ENABLE) {
+ if (use_slot_nums && (mmcra & MMCRA_SAMPLE_ENABLE)) {
slot = ((mmcra & MMCRA_SLOT) >> MMCRA_SLOT_SHIFT);
if (slot > 1)
pc += 4 * (slot - 1);
diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig
index 14e027f5be6..f39c953d535 100644
--- a/arch/powerpc/platforms/40x/Kconfig
+++ b/arch/powerpc/platforms/40x/Kconfig
@@ -153,6 +153,7 @@ config 405GPR
config XILINX_VIRTEX
bool
+ select DEFAULT_UIMAGE
config XILINX_VIRTEX_II_PRO
bool
diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig
index bf5c7ff2e6e..0d83a6a0397 100644
--- a/arch/powerpc/platforms/44x/Kconfig
+++ b/arch/powerpc/platforms/44x/Kconfig
@@ -246,6 +246,7 @@ config IBM440EP_ERR42
# Xilinx specific config options.
config XILINX_VIRTEX
bool
+ select DEFAULT_UIMAGE
# Xilinx Virtex 5 FXT FPGA architecture, selected by a Xilinx board above
config XILINX_VIRTEX_5_FXT
diff --git a/arch/powerpc/platforms/cell/ras.c b/arch/powerpc/platforms/cell/ras.c
index 5f961c464cc..296b5268754 100644
--- a/arch/powerpc/platforms/cell/ras.c
+++ b/arch/powerpc/platforms/cell/ras.c
@@ -122,12 +122,23 @@ static int __init cbe_ptcal_enable_on_node(int nid, int order)
area->nid = nid;
area->order = order;
- area->pages = alloc_pages_node(area->nid, GFP_KERNEL, area->order);
+ area->pages = alloc_pages_node(area->nid, GFP_KERNEL | GFP_THISNODE,
+ area->order);
- if (!area->pages)
+ if (!area->pages) {
+ printk(KERN_WARNING "%s: no page on node %d\n",
+ __func__, area->nid);
goto out_free_area;
+ }
- addr = __pa(page_address(area->pages));
+ /*
+ * We move the ptcal area to the middle of the allocated
+ * page, in order to avoid prefetches in memcpy and similar
+ * functions stepping on it.
+ */
+ addr = __pa(page_address(area->pages)) + (PAGE_SIZE >> 1);
+ printk(KERN_DEBUG "%s: enabling PTCAL on node %d address=0x%016lx\n",
+ __func__, area->nid, addr);
ret = -EIO;
if (rtas_call(ptcal_start_tok, 3, 1, NULL, area->nid,
diff --git a/arch/powerpc/platforms/iseries/Kconfig b/arch/powerpc/platforms/iseries/Kconfig
index 647e8778743..47a20cfb448 100644
--- a/arch/powerpc/platforms/iseries/Kconfig
+++ b/arch/powerpc/platforms/iseries/Kconfig
@@ -17,6 +17,7 @@ config VIODASD
config VIOCD
tristate "iSeries Virtual I/O CD support"
+ depends on BLOCK
select VIOPATH
help
If you are running Linux on an IBM iSeries system and you want to
diff --git a/arch/powerpc/platforms/iseries/iommu.c b/arch/powerpc/platforms/iseries/iommu.c
index ff43f1fd834..40219823d9b 100644
--- a/arch/powerpc/platforms/iseries/iommu.c
+++ b/arch/powerpc/platforms/iseries/iommu.c
@@ -174,9 +174,10 @@ static struct iommu_table *iommu_table_find(struct iommu_table * tbl)
}
-void iommu_devnode_init_iSeries(struct pci_dev *pdev, struct device_node *dn)
+static void pci_dma_dev_setup_iseries(struct pci_dev *pdev)
{
struct iommu_table *tbl;
+ struct device_node *dn = pdev->sysdata;
struct pci_dn *pdn = PCI_DN(dn);
const u32 *lsn = of_get_property(dn, "linux,logical-slot-number", NULL);
@@ -194,6 +195,8 @@ void iommu_devnode_init_iSeries(struct pci_dev *pdev, struct device_node *dn)
kfree(tbl);
pdev->dev.archdata.dma_data = pdn->iommu_table;
}
+#else
+#define pci_dma_dev_setup_iseries NULL
#endif
static struct iommu_table veth_iommu_table;
@@ -251,5 +254,6 @@ void iommu_init_early_iSeries(void)
ppc_md.tce_build = tce_build_iSeries;
ppc_md.tce_free = tce_free_iSeries;
+ ppc_md.pci_dma_dev_setup = pci_dma_dev_setup_iseries;
set_pci_dma_ops(&dma_iommu_ops);
}
diff --git a/arch/powerpc/platforms/iseries/pci.c b/arch/powerpc/platforms/iseries/pci.c
index 02a634faedb..21cddc30220 100644
--- a/arch/powerpc/platforms/iseries/pci.c
+++ b/arch/powerpc/platforms/iseries/pci.c
@@ -444,7 +444,6 @@ void __init iSeries_pcibios_fixup_resources(struct pci_dev *pdev)
pdev->sysdata = node;
allocate_device_bars(pdev);
iseries_device_information(pdev, bus, *sub_bus);
- iommu_devnode_init_iSeries(pdev, node);
}
/*
diff --git a/arch/powerpc/platforms/maple/pci.c b/arch/powerpc/platforms/maple/pci.c
index 301855263b8..04296ffff8b 100644
--- a/arch/powerpc/platforms/maple/pci.c
+++ b/arch/powerpc/platforms/maple/pci.c
@@ -592,3 +592,17 @@ int maple_pci_get_legacy_ide_irq(struct pci_dev *pdev, int channel)
}
return irq;
}
+
+static void __devinit quirk_ipr_msi(struct pci_dev *dev)
+{
+ /* Something prevents MSIs from the IPR from working on Bimini,
+ * and the driver has no smarts to recover. So disable MSI
+ * on it for now. */
+
+ if (machine_is(maple)) {
+ dev->no_msi = 1;
+ dev_info(&dev->dev, "Quirk disabled MSI\n");
+ }
+}
+DECLARE_PCI_FIXUP_FINAL(PCI_VENDOR_ID_IBM, PCI_DEVICE_ID_IBM_OBSIDIAN,
+ quirk_ipr_msi);
diff --git a/arch/powerpc/sysdev/fsl_soc.c b/arch/powerpc/sysdev/fsl_soc.c
index afe8dbc964a..5c64ccd402e 100644
--- a/arch/powerpc/sysdev/fsl_soc.c
+++ b/arch/powerpc/sysdev/fsl_soc.c
@@ -208,52 +208,6 @@ static int __init of_add_fixed_phys(void)
arch_initcall(of_add_fixed_phys);
#endif /* CONFIG_FIXED_PHY */
-#ifdef CONFIG_PPC_83xx
-static int __init mpc83xx_wdt_init(void)
-{
- struct resource r;
- struct device_node *np;
- struct platform_device *dev;
- u32 freq = fsl_get_sys_freq();
- int ret;
-
- np = of_find_compatible_node(NULL, "watchdog", "mpc83xx_wdt");
-
- if (!np) {
- ret = -ENODEV;
- goto nodev;
- }
-
- memset(&r, 0, sizeof(r));
-
- ret = of_address_to_resource(np, 0, &r);
- if (ret)
- goto err;
-
- dev = platform_device_register_simple("mpc83xx_wdt", 0, &r, 1);
- if (IS_ERR(dev)) {
- ret = PTR_ERR(dev);
- goto err;
- }
-
- ret = platform_device_add_data(dev, &freq, sizeof(freq));
- if (ret)
- goto unreg;
-
- of_node_put(np);
- return 0;
-
-unreg:
- platform_device_unregister(dev);
-err:
- of_node_put(np);
-nodev:
- return ret;
-}
-
-arch_initcall(mpc83xx_wdt_init);
-#endif
-
static enum fsl_usb2_phy_modes determine_usb_phy(const char *phy_type)
{
if (!phy_type)
diff --git a/arch/powerpc/sysdev/mpic.c b/arch/powerpc/sysdev/mpic.c
index 21b95670159..0efc12d1a3d 100644
--- a/arch/powerpc/sysdev/mpic.c
+++ b/arch/powerpc/sysdev/mpic.c
@@ -1057,13 +1057,6 @@ struct mpic * __init mpic_alloc(struct device_node *node,
memset(mpic, 0, sizeof(struct mpic));
mpic->name = name;
- mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
- isu_size, &mpic_host_ops,
- flags & MPIC_LARGE_VECTORS ? 2048 : 256);
- if (mpic->irqhost == NULL)
- return NULL;
-
- mpic->irqhost->host_data = mpic;
mpic->hc_irq = mpic_irq_chip;
mpic->hc_irq.typename = name;
if (flags & MPIC_PRIMARY)
@@ -1213,6 +1206,15 @@ struct mpic * __init mpic_alloc(struct device_node *node,
mpic->isu_shift = 1 + __ilog2(mpic->isu_size - 1);
mpic->isu_mask = (1 << mpic->isu_shift) - 1;
+ mpic->irqhost = irq_alloc_host(node, IRQ_HOST_MAP_LINEAR,
+ isu_size ? isu_size : mpic->num_sources,
+ &mpic_host_ops,
+ flags & MPIC_LARGE_VECTORS ? 2048 : 256);
+ if (mpic->irqhost == NULL)
+ return NULL;
+
+ mpic->irqhost->host_data = mpic;
+
/* Display version */
switch (greg_feature & MPIC_GREG_FEATURE_VERSION_MASK) {
case 1:
diff --git a/arch/powerpc/sysdev/xilinx_intc.c b/arch/powerpc/sysdev/xilinx_intc.c
index a22e1a2df1a..c658b413c9b 100644
--- a/arch/powerpc/sysdev/xilinx_intc.c
+++ b/arch/powerpc/sysdev/xilinx_intc.c
@@ -41,8 +41,32 @@
static struct irq_host *master_irqhost;
+#define XILINX_INTC_MAXIRQS (32)
+
+/* The following table allows the interrupt type, edge or level,
+ * to be cached after being read from the device tree until the interrupt
+ * is mapped
+ */
+static int xilinx_intc_typetable[XILINX_INTC_MAXIRQS];
+
+/* Map the interrupt type from the device tree to the interrupt types
+ * used by the interrupt subsystem
+ */
+static unsigned char xilinx_intc_map_senses[] = {
+ IRQ_TYPE_EDGE_RISING,
+ IRQ_TYPE_EDGE_FALLING,
+ IRQ_TYPE_LEVEL_HIGH,
+ IRQ_TYPE_LEVEL_LOW,
+};
+
/*
- * IRQ Chip operations
+ * The interrupt controller is setup such that it doesn't work well with
+ * the level interrupt handler in the kernel because the handler acks the
+ * interrupt before calling the application interrupt handler. To deal with
+ * that, we use 2 different irq chips so that different functions can be
+ * used for level and edge type interrupts.
+ *
+ * IRQ Chip common (across level and edge) operations
*/
static void xilinx_intc_mask(unsigned int virq)
{
@@ -52,15 +76,54 @@ static void xilinx_intc_mask(unsigned int virq)
out_be32(regs + XINTC_CIE, 1 << irq);
}
-static void xilinx_intc_unmask(unsigned int virq)
+static int xilinx_intc_set_type(unsigned int virq, unsigned int flow_type)
+{
+ struct irq_desc *desc = get_irq_desc(virq);
+
+ desc->status &= ~(IRQ_TYPE_SENSE_MASK | IRQ_LEVEL);
+ desc->status |= flow_type & IRQ_TYPE_SENSE_MASK;
+ if (flow_type & (IRQ_TYPE_LEVEL_HIGH | IRQ_TYPE_LEVEL_LOW))
+ desc->status |= IRQ_LEVEL;
+ return 0;
+}
+
+/*
+ * IRQ Chip level operations
+ */
+static void xilinx_intc_level_unmask(unsigned int virq)
{
int irq = virq_to_hw(virq);
void * regs = get_irq_chip_data(virq);
pr_debug("unmask: %d\n", irq);
out_be32(regs + XINTC_SIE, 1 << irq);
+
+ /* ack level irqs because they can't be acked during
+ * ack function since the handle_level_irq function
+ * acks the irq before calling the inerrupt handler
+ */
+ out_be32(regs + XINTC_IAR, 1 << irq);
}
-static void xilinx_intc_ack(unsigned int virq)
+static struct irq_chip xilinx_intc_level_irqchip = {
+ .typename = "Xilinx Level INTC",
+ .mask = xilinx_intc_mask,
+ .mask_ack = xilinx_intc_mask,
+ .unmask = xilinx_intc_level_unmask,
+ .set_type = xilinx_intc_set_type,
+};
+
+/*
+ * IRQ Chip edge operations
+ */
+static void xilinx_intc_edge_unmask(unsigned int virq)
+{
+ int irq = virq_to_hw(virq);
+ void *regs = get_irq_chip_data(virq);
+ pr_debug("unmask: %d\n", irq);
+ out_be32(regs + XINTC_SIE, 1 << irq);
+}
+
+static void xilinx_intc_edge_ack(unsigned int virq)
{
int irq = virq_to_hw(virq);
void * regs = get_irq_chip_data(virq);
@@ -68,27 +131,60 @@ static void xilinx_intc_ack(unsigned int virq)
out_be32(regs + XINTC_IAR, 1 << irq);
}
-static struct irq_chip xilinx_intc_irqchip = {
- .typename = "Xilinx INTC",
+static struct irq_chip xilinx_intc_edge_irqchip = {
+ .typename = "Xilinx Edge INTC",
.mask = xilinx_intc_mask,
- .unmask = xilinx_intc_unmask,
- .ack = xilinx_intc_ack,
+ .unmask = xilinx_intc_edge_unmask,
+ .ack = xilinx_intc_edge_ack,
+ .set_type = xilinx_intc_set_type,
};
/*
* IRQ Host operations
*/
+
+/**
+ * xilinx_intc_xlate - translate virq# from device tree interrupts property
+ */
+static int xilinx_intc_xlate(struct irq_host *h, struct device_node *ct,
+ u32 *intspec, unsigned int intsize,
+ irq_hw_number_t *out_hwirq,
+ unsigned int *out_flags)
+{
+ if ((intsize < 2) || (intspec[0] >= XILINX_INTC_MAXIRQS))
+ return -EINVAL;
+
+ /* keep a copy of the interrupt type til the interrupt is mapped
+ */
+ xilinx_intc_typetable[intspec[0]] = xilinx_intc_map_senses[intspec[1]];
+
+ /* Xilinx uses 2 interrupt entries, the 1st being the h/w
+ * interrupt number, the 2nd being the interrupt type, edge or level
+ */
+ *out_hwirq = intspec[0];
+ *out_flags = xilinx_intc_map_senses[intspec[1]];
+
+ return 0;
+}
static int xilinx_intc_map(struct irq_host *h, unsigned int virq,
irq_hw_number_t irq)
{
set_irq_chip_data(virq, h->host_data);
- set_irq_chip_and_handler(virq, &xilinx_intc_irqchip, handle_level_irq);
- set_irq_type(virq, IRQ_TYPE_NONE);
+
+ if (xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_HIGH ||
+ xilinx_intc_typetable[irq] == IRQ_TYPE_LEVEL_LOW) {
+ set_irq_chip_and_handler(virq, &xilinx_intc_level_irqchip,
+ handle_level_irq);
+ } else {
+ set_irq_chip_and_handler(virq, &xilinx_intc_edge_irqchip,
+ handle_edge_irq);
+ }
return 0;
}
static struct irq_host_ops xilinx_intc_ops = {
.map = xilinx_intc_map,
+ .xlate = xilinx_intc_xlate,
};
struct irq_host * __init
@@ -116,7 +212,8 @@ xilinx_intc_init(struct device_node *np)
out_be32(regs + XINTC_MER, 0x3UL); /* Turn on the Master Enable. */
/* Allocate and initialize an irq_host structure. */
- irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, 32, &xilinx_intc_ops, -1);
+ irq = irq_alloc_host(np, IRQ_HOST_MAP_LINEAR, XILINX_INTC_MAXIRQS,
+ &xilinx_intc_ops, -1);
if (!irq)
panic(__FILE__ ": Cannot allocate IRQ host\n");
irq->host_data = regs;
diff --git a/arch/sh/boards/board-ap325rxa.c b/arch/sh/boards/board-ap325rxa.c
index 39e46919df1..f2a29641b6a 100644
--- a/arch/sh/boards/board-ap325rxa.c
+++ b/arch/sh/boards/board-ap325rxa.c
@@ -263,6 +263,9 @@ static int camera_probe(void)
struct i2c_msg msg;
int ret;
+ if (!a)
+ return -ENODEV;
+
camera_power(1);
msg.addr = 0x6e;
msg.buf = camera_ncm03j_magic;
diff --git a/arch/x86/Kconfig b/arch/x86/Kconfig
index df9e885eee1..a6efe0a2e9a 100644
--- a/arch/x86/Kconfig
+++ b/arch/x86/Kconfig
@@ -498,6 +498,19 @@ config PARAVIRT
over full virtualization. However, when run without a hypervisor
the kernel is theoretically slower and slightly larger.
+config PARAVIRT_SPINLOCKS
+ bool "Paravirtualization layer for spinlocks"
+ depends on PARAVIRT && SMP && EXPERIMENTAL
+ ---help---
+ Paravirtualized spinlocks allow a pvops backend to replace the
+ spinlock implementation with something virtualization-friendly
+ (for example, block the virtual CPU rather than spinning).
+
+ Unfortunately the downside is an up to 5% performance hit on
+ native kernels, with various workloads.
+
+ If you are unsure how to answer this question, answer N.
+
config PARAVIRT_CLOCK
bool
default n
diff --git a/arch/x86/include/asm/mce.h b/arch/x86/include/asm/mce.h
index 563933e06a3..4f8c199584e 100644
--- a/arch/x86/include/asm/mce.h
+++ b/arch/x86/include/asm/mce.h
@@ -137,6 +137,7 @@ DECLARE_PER_CPU(mce_banks_t, mce_poll_banks);
enum mcp_flags {
MCP_TIMESTAMP = (1 << 0), /* log time stamp */
MCP_UC = (1 << 1), /* log uncorrected errors */
+ MCP_DONTLOG = (1 << 2), /* only clear, don't log */
};
extern void machine_check_poll(enum mcp_flags flags, mce_banks_t *b);
diff --git a/arch/x86/include/asm/paravirt.h b/arch/x86/include/asm/paravirt.h
index 378e3691c08..a53da004e08 100644
--- a/arch/x86/include/asm/paravirt.h
+++ b/arch/x86/include/asm/paravirt.h
@@ -1443,7 +1443,7 @@ u64 _paravirt_ident_64(u64);
#define paravirt_nop ((void *)_paravirt_nop)
-#ifdef CONFIG_SMP
+#if defined(CONFIG_SMP) && defined(CONFIG_PARAVIRT_SPINLOCKS)
static inline int __raw_spin_is_locked(struct raw_spinlock *lock)
{
diff --git a/arch/x86/include/asm/percpu.h b/arch/x86/include/asm/percpu.h
index aee103b26d0..02ecb30982a 100644
--- a/arch/x86/include/asm/percpu.h
+++ b/arch/x86/include/asm/percpu.h
@@ -82,22 +82,22 @@ do { \
case 1: \
asm(op "b %1,"__percpu_arg(0) \
: "+m" (var) \
- : "ri" ((T__)val)); \
+ : "qi" ((T__)(val))); \
break; \
case 2: \
asm(op "w %1,"__percpu_arg(0) \
: "+m" (var) \
- : "ri" ((T__)val)); \
+ : "ri" ((T__)(val))); \
break; \
case 4: \
asm(op "l %1,"__percpu_arg(0) \
: "+m" (var) \
- : "ri" ((T__)val)); \
+ : "ri" ((T__)(val))); \
break; \
case 8: \
asm(op "q %1,"__percpu_arg(0) \
: "+m" (var) \
- : "re" ((T__)val)); \
+ : "re" ((T__)(val))); \
break; \
default: __bad_percpu_size(); \
} \
@@ -109,7 +109,7 @@ do { \
switch (sizeof(var)) { \
case 1: \
asm(op "b "__percpu_arg(1)",%0" \
- : "=r" (ret__) \
+ : "=q" (ret__) \
: "m" (var)); \
break; \
case 2: \
diff --git a/arch/x86/include/asm/ptrace.h b/arch/x86/include/asm/ptrace.h
index e304b66abee..624f133943e 100644
--- a/arch/x86/include/asm/ptrace.h
+++ b/arch/x86/include/asm/ptrace.h
@@ -187,14 +187,15 @@ static inline int v8086_mode(struct pt_regs *regs)
/*
* X86_32 CPUs don't save ss and esp if the CPU is already in kernel mode
- * when it traps. So regs will be the current sp.
+ * when it traps. The previous stack will be directly underneath the saved
+ * registers, and 'sp/ss' won't even have been saved. Thus the '&regs->sp'.
*
* This is valid only for kernel mode traps.
*/
-static inline unsigned long kernel_trap_sp(struct pt_regs *regs)
+static inline unsigned long kernel_stack_pointer(struct pt_regs *regs)
{
#ifdef CONFIG_X86_32
- return (unsigned long)regs;
+ return (unsigned long)(&regs->sp);
#else
return regs->sp;
#endif
diff --git a/arch/x86/include/asm/spinlock.h b/arch/x86/include/asm/spinlock.h
index e5e6caffec8..b7e5db87639 100644
--- a/arch/x86/include/asm/spinlock.h
+++ b/arch/x86/include/asm/spinlock.h
@@ -172,7 +172,7 @@ static inline int __ticket_spin_is_contended(raw_spinlock_t *lock)
return (((tmp >> TICKET_SHIFT) - tmp) & ((1 << TICKET_SHIFT) - 1)) > 1;
}
-#ifndef CONFIG_PARAVIRT
+#ifndef CONFIG_PARAVIRT_SPINLOCKS
static inline int __raw_spin_is_locked(raw_spinlock_t *lock)
{
@@ -206,7 +206,7 @@ static __always_inline void __raw_spin_lock_flags(raw_spinlock_t *lock,
__raw_spin_lock(lock);
}
-#endif
+#endif /* CONFIG_PARAVIRT_SPINLOCKS */
static inline void __raw_spin_unlock_wait(raw_spinlock_t *lock)
{
diff --git a/arch/x86/kernel/Makefile b/arch/x86/kernel/Makefile
index 145cce75cda..88d1bfc847d 100644
--- a/arch/x86/kernel/Makefile
+++ b/arch/x86/kernel/Makefile
@@ -89,7 +89,8 @@ obj-$(CONFIG_DEBUG_NX_TEST) += test_nx.o
obj-$(CONFIG_VMI) += vmi_32.o vmiclock_32.o
obj-$(CONFIG_KVM_GUEST) += kvm.o
obj-$(CONFIG_KVM_CLOCK) += kvmclock.o
-obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o paravirt-spinlocks.o
+obj-$(CONFIG_PARAVIRT) += paravirt.o paravirt_patch_$(BITS).o
+obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= paravirt-spinlocks.o
obj-$(CONFIG_PARAVIRT_CLOCK) += pvclock.o
obj-$(CONFIG_PCSPKR_PLATFORM) += pcspeaker.o
diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c
index 42c33cebf00..8c0be0902da 100644
--- a/arch/x86/kernel/amd_iommu_init.c
+++ b/arch/x86/kernel/amd_iommu_init.c
@@ -49,10 +49,10 @@
#define IVHD_DEV_EXT_SELECT 0x46
#define IVHD_DEV_EXT_SELECT_RANGE 0x47
-#define IVHD_FLAG_HT_TUN_EN 0x00
-#define IVHD_FLAG_PASSPW_EN 0x01
-#define IVHD_FLAG_RESPASSPW_EN 0x02
-#define IVHD_FLAG_ISOC_EN 0x03
+#define IVHD_FLAG_HT_TUN_EN_MASK 0x01
+#define IVHD_FLAG_PASSPW_EN_MASK 0x02
+#define IVHD_FLAG_RESPASSPW_EN_MASK 0x04
+#define IVHD_FLAG_ISOC_EN_MASK 0x08
#define IVMD_FLAG_EXCL_RANGE 0x08
#define IVMD_FLAG_UNITY_MAP 0x01
@@ -569,19 +569,19 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu,
* First set the recommended feature enable bits from ACPI
* into the IOMMU control registers
*/
- h->flags & IVHD_FLAG_HT_TUN_EN ?
+ h->flags & IVHD_FLAG_HT_TUN_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) :
iommu_feature_disable(iommu, CONTROL_HT_TUN_EN);
- h->flags & IVHD_FLAG_PASSPW_EN ?
+ h->flags & IVHD_FLAG_PASSPW_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_PASSPW_EN) :
iommu_feature_disable(iommu, CONTROL_PASSPW_EN);
- h->flags & IVHD_FLAG_RESPASSPW_EN ?
+ h->flags & IVHD_FLAG_RESPASSPW_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) :
iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN);
- h->flags & IVHD_FLAG_ISOC_EN ?
+ h->flags & IVHD_FLAG_ISOC_EN_MASK ?
iommu_feature_enable(iommu, CONTROL_ISOC_EN) :
iommu_feature_disable(iommu, CONTROL_ISOC_EN);
diff --git a/arch/x86/kernel/apic/es7000_32.c b/arch/x86/kernel/apic/es7000_32.c
index 1c11b819f24..30294777557 100644
--- a/arch/x86/kernel/apic/es7000_32.c
+++ b/arch/x86/kernel/apic/es7000_32.c
@@ -254,7 +254,7 @@ static int parse_unisys_oem(char *oemptr)
}
#ifdef CONFIG_ACPI
-static int find_unisys_acpi_oem_table(unsigned long *oem_addr)
+static int __init find_unisys_acpi_oem_table(unsigned long *oem_addr)
{
struct acpi_table_header *header = NULL;
struct es7000_oem_table *table;
@@ -285,7 +285,7 @@ static int find_unisys_acpi_oem_table(unsigned long *oem_addr)
return 0;
}
-static void unmap_unisys_acpi_oem_table(unsigned long oem_addr)
+static void __init unmap_unisys_acpi_oem_table(unsigned long oem_addr)
{
if (!oem_addr)
return;
@@ -306,7 +306,7 @@ static int es7000_check_dsdt(void)
static int es7000_acpi_ret;
/* Hook from generic ACPI tables.c */
-static int es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
+static int __init es7000_acpi_madt_oem_check(char *oem_id, char *oem_table_id)
{
unsigned long oem_addr = 0;
int check_dsdt;
@@ -717,7 +717,7 @@ struct apic apic_es7000_cluster = {
.safe_wait_icr_idle = native_safe_apic_wait_icr_idle,
};
-struct apic apic_es7000 = {
+struct apic __refdata apic_es7000 = {
.name = "es7000",
.probe = probe_es7000,
diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c
index c4f667896c2..c1caefc82e6 100644
--- a/arch/x86/kernel/cpu/common.c
+++ b/arch/x86/kernel/cpu/common.c
@@ -1203,6 +1203,8 @@ void __cpuinit cpu_init(void)
load_TR_desc();
load_LDT(&init_mm.context);
+ t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap);
+
#ifdef CONFIG_DOUBLEFAULT
/* Set up doublefault TSS pointer in the GDT */
__set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss);
diff --git a/arch/x86/kernel/cpu/mcheck/mce_64.c b/arch/x86/kernel/cpu/mcheck/mce_64.c
index 863f89568b1..6fb0b359d2a 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_64.c
@@ -239,9 +239,10 @@ void machine_check_poll(enum mcp_flags flags, mce_banks_t *b)
* Don't get the IP here because it's unlikely to
* have anything to do with the actual error location.
*/
-
- mce_log(&m);
- add_taint(TAINT_MACHINE_CHECK);
+ if (!(flags & MCP_DONTLOG)) {
+ mce_log(&m);
+ add_taint(TAINT_MACHINE_CHECK);
+ }
/*
* Clear state for this bank.
@@ -452,13 +453,14 @@ void mce_log_therm_throt_event(__u64 status)
*/
static int check_interval = 5 * 60; /* 5 minutes */
-static int next_interval; /* in jiffies */
+static DEFINE_PER_CPU(int, next_interval); /* in jiffies */
static void mcheck_timer(unsigned long);
static DEFINE_PER_CPU(struct timer_list, mce_timer);
static void mcheck_timer(unsigned long data)
{
struct timer_list *t = &per_cpu(mce_timer, data);
+ int *n;
WARN_ON(smp_processor_id() != data);
@@ -470,14 +472,14 @@ static void mcheck_timer(unsigned long data)
* Alert userspace if needed. If we logged an MCE, reduce the
* polling interval, otherwise increase the polling interval.
*/
+ n = &__get_cpu_var(next_interval);
if (mce_notify_user()) {
- next_interval = max(next_interval/2, HZ/100);
+ *n = max(*n/2, HZ/100);
} else {
- next_interval = min(next_interval * 2,
- (int)round_jiffies_relative(check_interval*HZ));
+ *n = min(*n*2, (int)round_jiffies_relative(check_interval*HZ));
}
- t->expires = jiffies + next_interval;
+ t->expires = jiffies + *n;
add_timer(t);
}
@@ -584,7 +586,7 @@ static void mce_init(void *dummy)
* Log the machine checks left over from the previous reset.
*/
bitmap_fill(all_banks, MAX_NR_BANKS);
- machine_check_poll(MCP_UC, &all_banks);
+ machine_check_poll(MCP_UC|(!mce_bootlog ? MCP_DONTLOG : 0), &all_banks);
set_in_cr4(X86_CR4_MCE);
@@ -632,14 +634,13 @@ static void mce_cpu_features(struct cpuinfo_x86 *c)
static void mce_init_timer(void)
{
struct timer_list *t = &__get_cpu_var(mce_timer);
+ int *n = &__get_cpu_var(next_interval);
- /* data race harmless because everyone sets to the same value */
- if (!next_interval)
- next_interval = check_interval * HZ;
- if (!next_interval)
+ *n = check_interval * HZ;
+ if (!*n)
return;
setup_timer(t, mcheck_timer, smp_processor_id());
- t->expires = round_jiffies(jiffies + next_interval);
+ t->expires = round_jiffies(jiffies + *n);
add_timer(t);
}
@@ -907,7 +908,6 @@ static void mce_cpu_restart(void *data)
/* Reinit MCEs after user configuration changes */
static void mce_restart(void)
{
- next_interval = check_interval * HZ;
on_each_cpu(mce_cpu_restart, NULL, 1);
}
@@ -1110,7 +1110,8 @@ static int __cpuinit mce_cpu_callback(struct notifier_block *nfb,
break;
case CPU_DOWN_FAILED:
case CPU_DOWN_FAILED_FROZEN:
- t->expires = round_jiffies(jiffies + next_interval);
+ t->expires = round_jiffies(jiffies +
+ __get_cpu_var(next_interval));
add_timer_on(t, cpu);
smp_call_function_single(cpu, mce_reenable_cpu, &action, 1);
break;
diff --git a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
index d6b72df89d6..cef3ee30744 100644
--- a/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
+++ b/arch/x86/kernel/cpu/mcheck/mce_intel_64.c
@@ -151,10 +151,11 @@ static void print_update(char *type, int *hdr, int num)
static void cmci_discover(int banks, int boot)
{
unsigned long *owned = (void *)&__get_cpu_var(mce_banks_owned);
+ unsigned long flags;
int hdr = 0;
int i;
- spin_lock(&cmci_discover_lock);
+ spin_lock_irqsave(&cmci_discover_lock, flags);
for (i = 0; i < banks; i++) {
u64 val;
@@ -184,7 +185,7 @@ static void cmci_discover(int banks, int boot)
WARN_ON(!test_bit(i, __get_cpu_var(mce_poll_banks)));
}
}
- spin_unlock(&cmci_discover_lock);
+ spin_unlock_irqrestore(&cmci_discover_lock, flags);
if (hdr)
printk(KERN_CONT "\n");
}
@@ -211,13 +212,14 @@ void cmci_recheck(void)
*/
void cmci_clear(void)
{
+ unsigned long flags;
int i;
int banks;
u64 val;
if (!cmci_supported(&banks))
return;
- spin_lock(&cmci_discover_lock);
+ spin_lock_irqsave(&cmci_discover_lock, flags);
for (i = 0; i < banks; i++) {
if (!test_bit(i, __get_cpu_var(mce_banks_owned)))
continue;
@@ -227,7 +229,7 @@ void cmci_clear(void)
wrmsrl(MSR_IA32_MC0_CTL2 + i, val);
__clear_bit(i, __get_cpu_var(mce_banks_owned));
}
- spin_unlock(&cmci_discover_lock);
+ spin_unlock_irqrestore(&cmci_discover_lock, flags);
}
/*
diff --git a/arch/x86/kernel/cpu/mtrr/generic.c b/arch/x86/kernel/cpu/mtrr/generic.c
index 0b776c09aff..d21d4fb161f 100644
--- a/arch/x86/kernel/cpu/mtrr/generic.c
+++ b/arch/x86/kernel/cpu/mtrr/generic.c
@@ -275,7 +275,11 @@ static void __init print_mtrr_state(void)
}
printk(KERN_DEBUG "MTRR variable ranges %sabled:\n",
mtrr_state.enabled & 2 ? "en" : "dis");
- high_width = ((size_or_mask ? ffs(size_or_mask) - 1 : 32) - (32 - PAGE_SHIFT) + 3) / 4;
+ if (size_or_mask & 0xffffffffUL)
+ high_width = ffs(size_or_mask & 0xffffffffUL) - 1;
+ else
+ high_width = ffs(size_or_mask>>32) + 32 - 1;
+ high_width = (high_width - (32 - PAGE_SHIFT) + 3) / 4;
for (i = 0; i < num_var_ranges; ++i) {
if (mtrr_state.var_ranges[i].mask_lo & (1 << 11))
printk(KERN_DEBUG " %u base %0*X%05X000 mask %0*X%05X000 %s\n",
diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c
index f93047fed79..d5e30397246 100644
--- a/arch/x86/kernel/cpu/proc.c
+++ b/arch/x86/kernel/cpu/proc.c
@@ -14,7 +14,7 @@ static void show_cpuinfo_core(struct seq_file *m, struct cpuinfo_x86 *c,
if (c->x86_max_cores * smp_num_siblings > 1) {
seq_printf(m, "physical id\t: %d\n", c->phys_proc_id);
seq_printf(m, "siblings\t: %d\n",
- cpumask_weight(cpu_sibling_mask(cpu)));
+ cpumask_weight(cpu_core_mask(cpu)));
seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id);
seq_printf(m, "cpu cores\t: %d\n", c->booted_cores);
seq_printf(m, "apicid\t\t: %d\n", c->apicid);
diff --git a/arch/x86/kernel/e820.c b/arch/x86/kernel/e820.c
index ef2c3563357..00628130292 100644
--- a/arch/x86/kernel/e820.c
+++ b/arch/x86/kernel/e820.c
@@ -1074,12 +1074,13 @@ u64 __init early_reserve_e820(u64 startt, u64 sizet, u64 align)
u64 addr;
u64 start;
- start = startt;
- while (size < sizet && (start + 1))
+ for (start = startt; ; start += size) {
start = find_e820_area_size(start, &size, align);
-
- if (size < sizet)
- return 0;
+ if (!(start + 1))
+ return 0;
+ if (size >= sizet)
+ break;
+ }
#ifdef CONFIG_X86_32
if (start >= MAXMEM)
diff --git a/arch/x86/kernel/ftrace.c b/arch/x86/kernel/ftrace.c
index 18dfa30795c..b79c5533c42 100644
--- a/arch/x86/kernel/ftrace.c
+++ b/arch/x86/kernel/ftrace.c
@@ -442,7 +442,7 @@ void prepare_ftrace_return(unsigned long *parent, unsigned long self_addr)
_ASM_EXTABLE(1b, 4b)
_ASM_EXTABLE(2b, 4b)
- : [old] "=r" (old), [faulted] "=r" (faulted)
+ : [old] "=&r" (old), [faulted] "=r" (faulted)
: [parent] "r" (parent), [return_hooker] "r" (return_hooker)
: "memory"
);
diff --git a/arch/x86/kernel/kgdb.c b/arch/x86/kernel/kgdb.c
index eedfaebe106..b1f4dffb919 100644
--- a/arch/x86/kernel/kgdb.c
+++ b/arch/x86/kernel/kgdb.c
@@ -88,6 +88,7 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
gdb_regs[GDB_SS] = __KERNEL_DS;
gdb_regs[GDB_FS] = 0xFFFF;
gdb_regs[GDB_GS] = 0xFFFF;
+ gdb_regs[GDB_SP] = (int)&regs->sp;
#else
gdb_regs[GDB_R8] = regs->r8;
gdb_regs[GDB_R9] = regs->r9;
@@ -100,8 +101,8 @@ void pt_regs_to_gdb_regs(unsigned long *gdb_regs, struct pt_regs *regs)
gdb_regs32[GDB_PS] = regs->flags;
gdb_regs32[GDB_CS] = regs->cs;
gdb_regs32[GDB_SS] = regs->ss;
-#endif
gdb_regs[GDB_SP] = regs->sp;
+#endif
}
/**
diff --git a/arch/x86/kernel/machine_kexec_32.c b/arch/x86/kernel/machine_kexec_32.c
index e7368c1da01..c1c429d0013 100644
--- a/arch/x86/kernel/machine_kexec_32.c
+++ b/arch/x86/kernel/machine_kexec_32.c
@@ -194,7 +194,7 @@ void machine_kexec(struct kimage *image)
unsigned int preserve_context);
#ifdef CONFIG_KEXEC_JUMP
- if (kexec_image->preserve_context)
+ if (image->preserve_context)
save_processor_state();
#endif
@@ -253,7 +253,7 @@ void machine_kexec(struct kimage *image)
image->preserve_context);
#ifdef CONFIG_KEXEC_JUMP
- if (kexec_image->preserve_context)
+ if (image->preserve_context)
restore_processor_state();
#endif
diff --git a/arch/x86/kernel/machine_kexec_64.c b/arch/x86/kernel/machine_kexec_64.c
index 89cea4d4467..84c3bf209e9 100644
--- a/arch/x86/kernel/machine_kexec_64.c
+++ b/arch/x86/kernel/machine_kexec_64.c
@@ -274,7 +274,7 @@ void machine_kexec(struct kimage *image)
int save_ftrace_enabled;
#ifdef CONFIG_KEXEC_JUMP
- if (kexec_image->preserve_context)
+ if (image->preserve_context)
save_processor_state();
#endif
@@ -333,7 +333,7 @@ void machine_kexec(struct kimage *image)
image->preserve_context);
#ifdef CONFIG_KEXEC_JUMP
- if (kexec_image->preserve_context)
+ if (image->preserve_context)
restore_processor_state();
#endif
diff --git a/arch/x86/kernel/paravirt.c b/arch/x86/kernel/paravirt.c
index 8e45f446488..9faf43bea33 100644
--- a/arch/x86/kernel/paravirt.c
+++ b/arch/x86/kernel/paravirt.c
@@ -134,7 +134,9 @@ static void *get_call_destination(u8 type)
.pv_irq_ops = pv_irq_ops,
.pv_apic_ops = pv_apic_ops,
.pv_mmu_ops = pv_mmu_ops,
+#ifdef CONFIG_PARAVIRT_SPINLOCKS
.pv_lock_ops = pv_lock_ops,
+#endif
};
return *((void **)&tmpl + type);
}
diff --git a/arch/x86/kvm/svm.c b/arch/x86/kvm/svm.c
index 1821c207819..1f8510c51d6 100644
--- a/arch/x86/kvm/svm.c
+++ b/arch/x86/kvm/svm.c
@@ -411,7 +411,6 @@ static __init int svm_hardware_setup(void)
iopm_va = page_address(iopm_pages);
memset(iopm_va, 0xff, PAGE_SIZE * (1 << IOPM_ALLOC_ORDER));
- clear_bit(0x80, iopm_va); /* allow direct access to PC debug port */
iopm_base = page_to_pfn(iopm_pages) << PAGE_SHIFT;
if (boot_cpu_has(X86_FEATURE_NX))
@@ -796,6 +795,11 @@ static void svm_get_segment(struct kvm_vcpu *vcpu,
var->db = (s->attrib >> SVM_SELECTOR_DB_SHIFT) & 1;
var->g = (s->attrib >> SVM_SELECTOR_G_SHIFT) & 1;
+ /* AMD's VMCB does not have an explicit unusable field, so emulate it
+ * for cross vendor migration purposes by "not present"
+ */
+ var->unusable = !var->present || (var->type == 0);
+
switch (seg) {
case VCPU_SREG_CS:
/*
@@ -827,8 +831,6 @@ static void svm_get_segment(struct kvm_vcpu *vcpu,
var->type |= 0x1;
break;
}
-
- var->unusable = !var->present;
}
static int svm_get_cpl(struct kvm_vcpu *vcpu)
diff --git a/arch/x86/kvm/x86.c b/arch/x86/kvm/x86.c
index 7c1ce5ac613..49079a46687 100644
--- a/arch/x86/kvm/x86.c
+++ b/arch/x86/kvm/x86.c
@@ -1121,9 +1121,9 @@ void kvm_arch_vcpu_put(struct kvm_vcpu *vcpu)
static int is_efer_nx(void)
{
- u64 efer;
+ unsigned long long efer = 0;
- rdmsrl(MSR_EFER, efer);
+ rdmsrl_safe(MSR_EFER, &efer);
return efer & EFER_NX;
}
@@ -1259,7 +1259,7 @@ static void do_cpuid_ent(struct kvm_cpuid_entry2 *entry, u32 function,
bit(X86_FEATURE_CMOV) | bit(X86_FEATURE_PSE36) |
bit(X86_FEATURE_MMX) | bit(X86_FEATURE_FXSR) |
bit(X86_FEATURE_SYSCALL) |
- (bit(X86_FEATURE_NX) && is_efer_nx()) |
+ (is_efer_nx() ? bit(X86_FEATURE_NX) : 0) |
#ifdef CONFIG_X86_64
bit(X86_FEATURE_LM) |
#endif
diff --git a/arch/x86/mm/init.c b/arch/x86/mm/init.c
index fd3da1dda1c..ae4f7b5d710 100644
--- a/arch/x86/mm/init.c
+++ b/arch/x86/mm/init.c
@@ -7,6 +7,7 @@
#include <asm/page.h>
#include <asm/page_types.h>
#include <asm/sections.h>
+#include <asm/setup.h>
#include <asm/system.h>
#include <asm/tlbflush.h>
@@ -304,8 +305,23 @@ unsigned long __init_refok init_memory_mapping(unsigned long start,
#endif
#ifdef CONFIG_X86_64
- if (!after_bootmem)
+ if (!after_bootmem && !start) {
+ pud_t *pud;
+ pmd_t *pmd;
+
mmu_cr4_features = read_cr4();
+
+ /*
+ * _brk_end cannot change anymore, but it and _end may be
+ * located on different 2M pages. cleanup_highmap(), however,
+ * can only consider _end when it runs, so destroy any
+ * mappings beyond _brk_end here.
+ */
+ pud = pud_offset(pgd_offset_k(_brk_end), _brk_end);
+ pmd = pmd_offset(pud, _brk_end - 1);
+ while (++pmd <= pmd_offset(pud, (unsigned long)_end - 1))
+ pmd_clear(pmd);
+ }
#endif
__flush_tlb_all();
diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c
index 4f115e00486..50dc802a1c4 100644
--- a/arch/x86/mm/kmmio.c
+++ b/arch/x86/mm/kmmio.c
@@ -87,7 +87,7 @@ static struct kmmio_probe *get_kmmio_probe(unsigned long addr)
{
struct kmmio_probe *p;
list_for_each_entry_rcu(p, &kmmio_probes, list) {
- if (addr >= p->addr && addr <= (p->addr + p->len))
+ if (addr >= p->addr && addr < (p->addr + p->len))
return p;
}
return NULL;
diff --git a/arch/x86/mm/srat_32.c b/arch/x86/mm/srat_32.c
index 16ae70fc57e..29a0e37114f 100644
--- a/arch/x86/mm/srat_32.c
+++ b/arch/x86/mm/srat_32.c
@@ -216,7 +216,7 @@ int __init get_memcfg_from_srat(void)
if (num_memory_chunks == 0) {
printk(KERN_WARNING
- "could not finy any ACPI SRAT memory areas.\n");
+ "could not find any ACPI SRAT memory areas.\n");
goto out_fail;
}
diff --git a/arch/x86/mm/srat_64.c b/arch/x86/mm/srat_64.c
index 33c5fa57e43..01765955baa 100644
--- a/arch/x86/mm/srat_64.c
+++ b/arch/x86/mm/srat_64.c
@@ -361,6 +361,7 @@ static void __init unparse_node(int node)
{
int i;
node_clear(node, nodes_parsed);
+ node_clear(node, cpu_nodes_parsed);
for (i = 0; i < MAX_LOCAL_APIC; i++) {
if (apicid_to_node[i] == node)
apicid_to_node[i] = NUMA_NO_NODE;
diff --git a/arch/x86/oprofile/backtrace.c b/arch/x86/oprofile/backtrace.c
index 04df67f8a7b..044897be021 100644
--- a/arch/x86/oprofile/backtrace.c
+++ b/arch/x86/oprofile/backtrace.c
@@ -76,9 +76,9 @@ void
x86_backtrace(struct pt_regs * const regs, unsigned int depth)
{
struct frame_head *head = (struct frame_head *)frame_pointer(regs);
- unsigned long stack = kernel_trap_sp(regs);
if (!user_mode_vm(regs)) {
+ unsigned long stack = kernel_stack_pointer(regs);
if (depth)
dump_trace(NULL, regs, (unsigned long *)stack, 0,
&backtrace_ops, &depth);
diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c
index d9d35824c56..6a40b78b46a 100644
--- a/arch/x86/vdso/vclock_gettime.c
+++ b/arch/x86/vdso/vclock_gettime.c
@@ -104,11 +104,13 @@ notrace int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz)
{
long ret;
if (likely(gtod->sysctl_enabled && gtod->clock.vread)) {
- BUILD_BUG_ON(offsetof(struct timeval, tv_usec) !=
- offsetof(struct timespec, tv_nsec) ||
- sizeof(*tv) != sizeof(struct timespec));
- do_realtime((struct timespec *)tv);
- tv->tv_usec /= 1000;
+ if (likely(tv != NULL)) {
+ BUILD_BUG_ON(offsetof(struct timeval, tv_usec) !=
+ offsetof(struct timespec, tv_nsec) ||
+ sizeof(*tv) != sizeof(struct timespec));
+ do_realtime((struct timespec *)tv);
+ tv->tv_usec /= 1000;
+ }
if (unlikely(tz != NULL)) {
/* Avoid memcpy. Some old compilers fail to inline it */
tz->tz_minuteswest = gtod->sys_tz.tz_minuteswest;
diff --git a/arch/x86/xen/Makefile b/arch/x86/xen/Makefile
index 3b767d03fd6..172438f86a0 100644
--- a/arch/x86/xen/Makefile
+++ b/arch/x86/xen/Makefile
@@ -9,5 +9,6 @@ obj-y := enlighten.o setup.o multicalls.o mmu.o irq.o \
time.o xen-asm.o xen-asm_$(BITS).o \
grant-table.o suspend.o
-obj-$(CONFIG_SMP) += smp.o spinlock.o
-obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o \ No newline at end of file
+obj-$(CONFIG_SMP) += smp.o
+obj-$(CONFIG_PARAVIRT_SPINLOCKS)+= spinlock.o
+obj-$(CONFIG_XEN_DEBUG_FS) += debugfs.o
diff --git a/arch/x86/xen/mmu.c b/arch/x86/xen/mmu.c
index 9842b121240..fba55b1a402 100644
--- a/arch/x86/xen/mmu.c
+++ b/arch/x86/xen/mmu.c
@@ -42,6 +42,7 @@
#include <linux/highmem.h>
#include <linux/debugfs.h>
#include <linux/bug.h>
+#include <linux/module.h>
#include <asm/pgtable.h>
#include <asm/tlbflush.h>
@@ -1794,6 +1795,11 @@ __init pgd_t *xen_setup_kernel_pagetable(pgd_t *pgd,
pin_pagetable_pfn(MMUEXT_PIN_L3_TABLE, PFN_DOWN(__pa(swapper_pg_dir)));
+ reserve_early(__pa(xen_start_info->pt_base),
+ __pa(xen_start_info->pt_base +
+ xen_start_info->nr_pt_frames * PAGE_SIZE),
+ "XEN PAGETABLES");
+
return swapper_pg_dir;
}
#endif /* CONFIG_X86_64 */
diff --git a/arch/x86/xen/xen-ops.h b/arch/x86/xen/xen-ops.h
index 20139464943..ca6596b05d5 100644
--- a/arch/x86/xen/xen-ops.h
+++ b/arch/x86/xen/xen-ops.h
@@ -62,15 +62,26 @@ void xen_setup_vcpu_info_placement(void);
#ifdef CONFIG_SMP
void xen_smp_init(void);
-void __init xen_init_spinlocks(void);
-__cpuinit void xen_init_lock_cpu(int cpu);
-void xen_uninit_lock_cpu(int cpu);
-
extern cpumask_var_t xen_cpu_initialized_map;
#else
static inline void xen_smp_init(void) {}
#endif
+#ifdef CONFIG_PARAVIRT_SPINLOCKS
+void __init xen_init_spinlocks(void);
+__cpuinit void xen_init_lock_cpu(int cpu);
+void xen_uninit_lock_cpu(int cpu);
+#else
+static inline void xen_init_spinlocks(void)
+{
+}
+static inline void xen_init_lock_cpu(int cpu)
+{
+}
+static inline void xen_uninit_lock_cpu(int cpu)
+{
+}
+#endif
/* Declare an asm function, along with symbols needed to make it
inlineable */
diff --git a/arch/xtensa/Kconfig b/arch/xtensa/Kconfig
index fa6dc4dd3b1..ebe228d02b0 100644
--- a/arch/xtensa/Kconfig
+++ b/arch/xtensa/Kconfig
@@ -80,6 +80,7 @@ config XTENSA_VARIANT_S6000
bool "s6000 - Stretch software configurable processor"
select VARIANT_IRQ_SWITCH
select ARCH_REQUIRE_GPIOLIB
+ select XTENSA_CALIBRATE_CCOUNT
endchoice
config XTENSA_UNALIGNED_USER
@@ -137,6 +138,8 @@ config PCI
source "drivers/pci/Kconfig"
+endmenu
+
menu "Platform options"
choice
@@ -153,8 +156,6 @@ config XTENSA_PLATFORM_ISS
config XTENSA_PLATFORM_XT2000
bool "XT2000"
- select XTENSA_CALIBRATE_CCOUNT
- select PCI
help
XT2000 is the name of Tensilica's feature-rich emulation platform.
This hardware is capable of running a full Linux distribution.
@@ -192,8 +193,6 @@ config CMDLINE
source "mm/Kconfig"
-endmenu
-
config HOTPLUG
bool "Support for hot-pluggable devices"
help
diff --git a/arch/xtensa/configs/s6105_defconfig b/arch/xtensa/configs/s6105_defconfig
index 6e1deff4159..768bee00603 100644
--- a/arch/xtensa/configs/s6105_defconfig
+++ b/arch/xtensa/configs/s6105_defconfig
@@ -115,7 +115,7 @@ CONFIG_XTENSA_VARIANT_S6000=y
CONFIG_PREEMPT=y
# CONFIG_MATH_EMULATION is not set
# CONFIG_HIGHMEM is not set
-# CONFIG_XTENSA_CALIBRATE_CCOUNT is not set
+CONFIG_XTENSA_CALIBRATE_CCOUNT=y
CONFIG_SERIAL_CONSOLE=y
# CONFIG_XTENSA_ISS_NETWORK is not set
@@ -131,7 +131,6 @@ CONFIG_SERIAL_CONSOLE=y
# CONFIG_XTENSA_PLATFORM_ISS is not set
# CONFIG_XTENSA_PLATFORM_XT2000 is not set
CONFIG_XTENSA_PLATFORM_S6105=y
-CONFIG_XTENSA_CPU_CLOCK=300
CONFIG_GENERIC_CALIBRATE_DELAY=y
CONFIG_CMDLINE_BOOL=y
CONFIG_CMDLINE="console=ttyS1,38400 debug bootmem_debug loglevel=7"
diff --git a/arch/xtensa/include/asm/checksum.h b/arch/xtensa/include/asm/checksum.h
index f84d3f00774..e4d831a3077 100644
--- a/arch/xtensa/include/asm/checksum.h
+++ b/arch/xtensa/include/asm/checksum.h
@@ -113,7 +113,8 @@ static __inline__ __sum16 ip_fast_csum(const void *iph, unsigned int ihl)
are modified, we must also specify them as outputs, or gcc
will assume they contain their original values. */
: "=r" (sum), "=r" (iph), "=r" (ihl), "=&r" (tmp), "=&r" (endaddr)
- : "1" (iph), "2" (ihl));
+ : "1" (iph), "2" (ihl)
+ : "memory");
return csum_fold(sum);
}
@@ -227,7 +228,8 @@ static __inline__ __sum16 csum_ipv6_magic(const struct in6_addr *saddr,
"1:\t"
: "=r" (sum), "=&r" (__dummy)
: "r" (saddr), "r" (daddr),
- "r" (htonl(len)), "r" (htonl(proto)), "0" (sum));
+ "r" (htonl(len)), "r" (htonl(proto)), "0" (sum)
+ : "memory");
return csum_fold(sum);
}
diff --git a/arch/xtensa/include/asm/timex.h b/arch/xtensa/include/asm/timex.h
index b83a8181d44..053bc427210 100644
--- a/arch/xtensa/include/asm/timex.h
+++ b/arch/xtensa/include/asm/timex.h
@@ -39,9 +39,9 @@
#ifdef CONFIG_XTENSA_CALIBRATE_CCOUNT
extern unsigned long ccount_per_jiffy;
-extern unsigned long ccount_nsec;
+extern unsigned long nsec_per_ccount;
#define CCOUNT_PER_JIFFY ccount_per_jiffy
-#define NSEC_PER_CCOUNT ccount_nsec
+#define NSEC_PER_CCOUNT nsec_per_ccount
#else
#define CCOUNT_PER_JIFFY (CONFIG_XTENSA_CPU_CLOCK*(1000000UL/HZ))
#define NSEC_PER_CCOUNT (1000UL / CONFIG_XTENSA_CPU_CLOCK)
diff --git a/arch/xtensa/kernel/Makefile b/arch/xtensa/kernel/Makefile
index 7419dbccf02..fe3186de6a3 100644
--- a/arch/xtensa/kernel/Makefile
+++ b/arch/xtensa/kernel/Makefile
@@ -4,15 +4,30 @@
extra-y := head.o vmlinux.lds
-
obj-y := align.o entry.o irq.o coprocessor.o process.o ptrace.o \
setup.o signal.o syscall.o time.o traps.o vectors.o platform.o \
pci-dma.o init_task.o io.o
-## windowspill.o
-
obj-$(CONFIG_KGDB) += xtensa-stub.o
obj-$(CONFIG_PCI) += pci.o
obj-$(CONFIG_MODULES) += xtensa_ksyms.o module.o
+# In the Xtensa architecture, assembly generates literals which must always
+# precede the L32R instruction with a relative offset less than 256 kB.
+# Therefore, the .text and .literal section must be combined in parenthesis
+# in the linker script, such as: *(.literal .text).
+#
+# We need to post-process the generated vmlinux.lds scripts to convert
+# *(xxx.text) to *(xxx.literal xxx.text) for the following text sections:
+# .text .ref.text .*init.text .*exit.text .text.*
+#
+# Replicate rules in scripts/Makefile.build
+
+sed-y = -e 's/(\(\.[a-z]*it\|\.ref\|\)\.text)/(\1.literal \1.text)/g' \
+ -e 's/(\(\.text\.[a-z]*\))/(\1.literal \1)/g'
+
+quiet_cmd__cpp_lds_S = LDS $@
+ cmd__cpp_lds_S = $(CPP) $(cpp_flags) -D__ASSEMBLY__ $< | sed $(sed-y) >$@
+$(obj)/vmlinux.lds: $(src)/vmlinux.lds.S FORCE
+ $(call if_changed_dep,_cpp_lds_S)
diff --git a/arch/xtensa/kernel/traps.c b/arch/xtensa/kernel/traps.c
index 9f0b71189e9..ba9ab934978 100644
--- a/arch/xtensa/kernel/traps.c
+++ b/arch/xtensa/kernel/traps.c
@@ -369,6 +369,18 @@ void show_regs(struct pt_regs * regs)
regs->syscall);
}
+static __always_inline unsigned long *stack_pointer(struct task_struct *task)
+{
+ unsigned long *sp;
+
+ if (!task || task == current)
+ __asm__ __volatile__ ("mov %0, a1\n" : "=a"(sp));
+ else
+ sp = (unsigned long *)task->thread.sp;
+
+ return sp;
+}
+
void show_trace(struct task_struct *task, unsigned long *sp)
{
unsigned long a0, a1, pc;
@@ -377,7 +389,7 @@ void show_trace(struct task_struct *task, unsigned long *sp)
if (sp)
a1 = (unsigned long)sp;
else
- a1 = task->thread.sp;
+ a1 = (unsigned long)stack_pointer(task);
sp_start = a1 & ~(THREAD_SIZE-1);
sp_end = sp_start + THREAD_SIZE;
@@ -420,7 +432,7 @@ void show_stack(struct task_struct *task, unsigned long *sp)
unsigned long *stack;
if (!sp)
- sp = (unsigned long *)task->thread.sp;
+ sp = stack_pointer(task);
stack = sp;
printk("\nStack: ");
diff --git a/arch/xtensa/kernel/vmlinux.lds.S b/arch/xtensa/kernel/vmlinux.lds.S
index 5accf51053d..41c159cd872 100644
--- a/arch/xtensa/kernel/vmlinux.lds.S
+++ b/arch/xtensa/kernel/vmlinux.lds.S
@@ -87,7 +87,7 @@ SECTIONS
{
/* The HEAD_TEXT section must be the first section! */
HEAD_TEXT
- *(.literal .text)
+ TEXT_TEXT
VMLINUX_SYMBOL(__sched_text_start) = .;
*(.sched.literal .sched.text)
VMLINUX_SYMBOL(__sched_text_end) = .;
@@ -139,8 +139,6 @@ SECTIONS
__init_begin = .;
.init.text : {
_sinittext = .;
- *(.init.literal) *(.cpuinit.literal)
- *(.devinit.literal) *(.meminit.literal)
INIT_TEXT
_einittext = .;
}
diff --git a/arch/xtensa/platforms/s6105/setup.c b/arch/xtensa/platforms/s6105/setup.c
index ae041d5027a..855ddeadc43 100644
--- a/arch/xtensa/platforms/s6105/setup.c
+++ b/arch/xtensa/platforms/s6105/setup.c
@@ -10,6 +10,8 @@
#include <asm/bootparam.h>
#include <variant/hardware.h>
+#include <variant/gpio.h>
+
#include <platform/gpio.h>
void platform_halt(void)
@@ -47,6 +49,7 @@ void __init platform_setup(char **cmdline)
void __init platform_init(bp_tag_t *first)
{
+ s6_gpio_init();
gpio_request(GPIO_LED1_NGREEN, "led1_green");
gpio_request(GPIO_LED1_RED, "led1_red");
gpio_direction_output(GPIO_LED1_NGREEN, 1);
diff --git a/arch/xtensa/variants/s6000/Makefile b/arch/xtensa/variants/s6000/Makefile
index 03b3975468b..d83f3805130 100644
--- a/arch/xtensa/variants/s6000/Makefile
+++ b/arch/xtensa/variants/s6000/Makefile
@@ -1,3 +1,4 @@
# s6000 Makefile
obj-y += irq.o gpio.o
+obj-$(CONFIG_XTENSA_CALIBRATE_CCOUNT) += delay.o
diff --git a/arch/xtensa/variants/s6000/delay.c b/arch/xtensa/variants/s6000/delay.c
new file mode 100644
index 00000000000..54b2b573f16
--- /dev/null
+++ b/arch/xtensa/variants/s6000/delay.c
@@ -0,0 +1,27 @@
+#include <asm/delay.h>
+#include <asm/timex.h>
+#include <asm/io.h>
+#include <variant/hardware.h>
+
+#define LOOPS 10
+void platform_calibrate_ccount(void)
+{
+ u32 uninitialized_var(a);
+ u32 uninitialized_var(u);
+ u32 b;
+ u32 tstamp = S6_REG_GREG1 + S6_GREG1_GLOBAL_TIMER;
+ int i = LOOPS+1;
+ do {
+ u32 t = u;
+ asm volatile(
+ "1: l32i %0, %2, 0 ;"
+ " beq %0, %1, 1b ;"
+ : "=&a"(u) : "a"(t), "a"(tstamp));
+ b = xtensa_get_ccount();
+ if (i == LOOPS)
+ a = b;
+ } while (--i >= 0);
+ b -= a;
+ nsec_per_ccount = (LOOPS * 10000) / b;
+ ccount_per_jiffy = b * (100000UL / (LOOPS * HZ));
+}
diff --git a/arch/xtensa/variants/s6000/gpio.c b/arch/xtensa/variants/s6000/gpio.c
index 33a8d952934..79317fdcf14 100644
--- a/arch/xtensa/variants/s6000/gpio.c
+++ b/arch/xtensa/variants/s6000/gpio.c
@@ -64,8 +64,7 @@ static struct gpio_chip gpiochip = {
.exported = 0, /* no exporting to userspace */
};
-static int gpio_init(void)
+int s6_gpio_init(void)
{
return gpiochip_add(&gpiochip);
}
-device_initcall(gpio_init);
diff --git a/arch/xtensa/variants/s6000/include/variant/gpio.h b/arch/xtensa/variants/s6000/include/variant/gpio.h
new file mode 100644
index 00000000000..8327f62167e
--- /dev/null
+++ b/arch/xtensa/variants/s6000/include/variant/gpio.h
@@ -0,0 +1,6 @@
+#ifndef _XTENSA_VARIANT_S6000_GPIO_H
+#define _XTENSA_VARIANT_S6000_GPIO_H
+
+extern int s6_gpio_init(void);
+
+#endif /* _XTENSA_VARIANT_S6000_GPIO_H */
diff --git a/block/blk-core.c b/block/blk-core.c
index 2998fe3a237..c89883be873 100644
--- a/block/blk-core.c
+++ b/block/blk-core.c
@@ -1768,10 +1768,10 @@ static int __end_that_request_first(struct request *req, int error,
} else {
int idx = bio->bi_idx + next_idx;
- if (unlikely(bio->bi_idx >= bio->bi_vcnt)) {
+ if (unlikely(idx >= bio->bi_vcnt)) {
blk_dump_rq_flags(req, "__end_that");
printk(KERN_ERR "%s: bio idx %d >= vcnt %d\n",
- __func__, bio->bi_idx, bio->bi_vcnt);
+ __func__, idx, bio->bi_vcnt);
break;
}
diff --git a/crypto/api.c b/crypto/api.c
index 314dab96840..fd2545decb2 100644
--- a/crypto/api.c
+++ b/crypto/api.c
@@ -221,7 +221,8 @@ struct crypto_alg *crypto_larval_lookup(const char *name, u32 type, u32 mask)
request_module(name);
- if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask) &&
+ if (!((type ^ CRYPTO_ALG_NEED_FALLBACK) & mask &
+ CRYPTO_ALG_NEED_FALLBACK) &&
snprintf(tmp, sizeof(tmp), "%s-all", name) < sizeof(tmp))
request_module(tmp);
diff --git a/crypto/eseqiv.c b/crypto/eseqiv.c
index 2a342c8e52b..3ca3b669d5d 100644
--- a/crypto/eseqiv.c
+++ b/crypto/eseqiv.c
@@ -153,7 +153,8 @@ static int eseqiv_givencrypt(struct skcipher_givcrypt_request *req)
if (err)
goto out;
- eseqiv_complete2(req);
+ if (giv != req->giv)
+ eseqiv_complete2(req);
out:
return err;
diff --git a/drivers/acpi/acpica/Makefile b/drivers/acpi/acpica/Makefile
index 17e50824a6f..72ac28da14e 100644
--- a/drivers/acpi/acpica/Makefile
+++ b/drivers/acpi/acpica/Makefile
@@ -5,40 +5,43 @@
ccflags-y := -Os
ccflags-$(CONFIG_ACPI_DEBUG) += -DACPI_DEBUG_OUTPUT
-obj-y := dsfield.o dsmthdat.o dsopcode.o dswexec.o dswscope.o \
+# use acpi.o to put all files here into acpi.o modparam namespace
+obj-y += acpi.o
+
+acpi-y := dsfield.o dsmthdat.o dsopcode.o dswexec.o dswscope.o \
dsmethod.o dsobject.o dsutils.o dswload.o dswstate.o \
dsinit.o
-obj-y += evevent.o evregion.o evsci.o evxfevnt.o \
+acpi-y += evevent.o evregion.o evsci.o evxfevnt.o \
evmisc.o evrgnini.o evxface.o evxfregn.o \
evgpe.o evgpeblk.o
-obj-y += exconfig.o exfield.o exnames.o exoparg6.o exresolv.o exstorob.o\
+acpi-y += exconfig.o exfield.o exnames.o exoparg6.o exresolv.o exstorob.o\
exconvrt.o exfldio.o exoparg1.o exprep.o exresop.o exsystem.o\
excreate.o exmisc.o exoparg2.o exregion.o exstore.o exutils.o \
exdump.o exmutex.o exoparg3.o exresnte.o exstoren.o
-obj-y += hwacpi.o hwgpe.o hwregs.o hwsleep.o hwxface.o hwvalid.o
+acpi-y += hwacpi.o hwgpe.o hwregs.o hwsleep.o hwxface.o hwvalid.o
-obj-$(ACPI_FUTURE_USAGE) += hwtimer.o
+acpi-$(ACPI_FUTURE_USAGE) += hwtimer.o
-obj-y += nsaccess.o nsload.o nssearch.o nsxfeval.o \
+acpi-y += nsaccess.o nsload.o nssearch.o nsxfeval.o \
nsalloc.o nseval.o nsnames.o nsutils.o nsxfname.o \
nsdump.o nsinit.o nsobject.o nswalk.o nsxfobj.o \
nsparse.o nspredef.o
-obj-$(ACPI_FUTURE_USAGE) += nsdumpdv.o
+acpi-$(ACPI_FUTURE_USAGE) += nsdumpdv.o
-obj-y += psargs.o psparse.o psloop.o pstree.o pswalk.o \
+acpi-y += psargs.o psparse.o psloop.o pstree.o pswalk.o \
psopcode.o psscope.o psutils.o psxface.o
-obj-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \
+acpi-y += rsaddr.o rscreate.o rsinfo.o rsio.o rslist.o rsmisc.o rsxface.o \
rscalc.o rsirq.o rsmemory.o rsutils.o
-obj-$(ACPI_FUTURE_USAGE) += rsdump.o
+acpi-$(ACPI_FUTURE_USAGE) += rsdump.o
-obj-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o
+acpi-y += tbxface.o tbinstal.o tbutils.o tbfind.o tbfadt.o tbxfroot.o
-obj-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
+acpi-y += utalloc.o utdebug.o uteval.o utinit.o utmisc.o utxface.o \
utcopy.o utdelete.o utglobal.o utmath.o utobject.o \
utstate.o utmutex.o utobject.o utresrc.o utlock.o
diff --git a/drivers/acpi/acpica/aclocal.h b/drivers/acpi/acpica/aclocal.h
index 772ee5c4ccc..2ec394a328e 100644
--- a/drivers/acpi/acpica/aclocal.h
+++ b/drivers/acpi/acpica/aclocal.h
@@ -787,7 +787,12 @@ struct acpi_bit_register_info {
/* For control registers, both ignored and reserved bits must be preserved */
-#define ACPI_PM1_CONTROL_IGNORED_BITS 0x0201 /* Bits 9, 0(SCI_EN) */
+/*
+ * The ACPI spec says to ignore PM1_CTL.SCI_EN (bit 0)
+ * but we need to be able to write ACPI_BITREG_SCI_ENABLE directly
+ * as a BIOS workaround on some machines.
+ */
+#define ACPI_PM1_CONTROL_IGNORED_BITS 0x0200 /* Bits 9 */
#define ACPI_PM1_CONTROL_RESERVED_BITS 0xC1F8 /* Bits 14-15, 3-8 */
#define ACPI_PM1_CONTROL_PRESERVED_BITS \
(ACPI_PM1_CONTROL_IGNORED_BITS | ACPI_PM1_CONTROL_RESERVED_BITS)
diff --git a/drivers/acpi/acpica/rscalc.c b/drivers/acpi/acpica/rscalc.c
index b6667ff059e..88b5a2c4814 100644
--- a/drivers/acpi/acpica/rscalc.c
+++ b/drivers/acpi/acpica/rscalc.c
@@ -543,6 +543,13 @@ acpi_rs_get_pci_routing_table_length(union acpi_operand_object *package_object,
package_element = *top_object_list;
+ /* We must have a valid Package object */
+
+ if (!package_element ||
+ (package_element->common.type != ACPI_TYPE_PACKAGE)) {
+ return_ACPI_STATUS (AE_AML_OPERAND_TYPE);
+ }
+
/*
* The sub_object_list will now point to an array of the
* four IRQ elements: Address, Pin, Source and source_index
diff --git a/drivers/acpi/bus.c b/drivers/acpi/bus.c
index e8f7b64e92d..ae862f1798d 100644
--- a/drivers/acpi/bus.c
+++ b/drivers/acpi/bus.c
@@ -312,7 +312,7 @@ int acpi_bus_set_power(acpi_handle handle, int state)
end:
if (result)
printk(KERN_WARNING PREFIX
- "Transitioning device [%s] to D%d\n",
+ "Device [%s] failed to transition to D%d\n",
device->pnp.bus_id, state);
else {
device->power.state = state;
diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c
index f7ca8c55956..72069ba5f1e 100644
--- a/drivers/acpi/processor_idle.c
+++ b/drivers/acpi/processor_idle.c
@@ -202,21 +202,44 @@ static void acpi_state_timer_broadcast(struct acpi_processor *pr,
* Suspend / resume control
*/
static int acpi_idle_suspend;
+static u32 saved_bm_rld;
+
+static void acpi_idle_bm_rld_save(void)
+{
+ acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &saved_bm_rld);
+}
+static void acpi_idle_bm_rld_restore(void)
+{
+ u32 resumed_bm_rld;
+
+ acpi_read_bit_register(ACPI_BITREG_BUS_MASTER_RLD, &resumed_bm_rld);
+
+ if (resumed_bm_rld != saved_bm_rld)
+ acpi_write_bit_register(ACPI_BITREG_BUS_MASTER_RLD, saved_bm_rld);
+}
int acpi_processor_suspend(struct acpi_device * device, pm_message_t state)
{
+ if (acpi_idle_suspend == 1)
+ return 0;
+
+ acpi_idle_bm_rld_save();
acpi_idle_suspend = 1;
return 0;
}
int acpi_processor_resume(struct acpi_device * device)
{
+ if (acpi_idle_suspend == 0)
+ return 0;
+
+ acpi_idle_bm_rld_restore();
acpi_idle_suspend = 0;
return 0;
}
#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
-static int tsc_halts_in_c(int state)
+static void tsc_check_state(int state)
{
switch (boot_cpu_data.x86_vendor) {
case X86_VENDOR_AMD:
@@ -226,13 +249,17 @@ static int tsc_halts_in_c(int state)
* C/P/S0/S1 states when this bit is set.
*/
if (boot_cpu_has(X86_FEATURE_NONSTOP_TSC))
- return 0;
+ return;
/*FALL THROUGH*/
default:
- return state > ACPI_STATE_C1;
+ /* TSC could halt in idle, so notify users */
+ if (state > ACPI_STATE_C1)
+ mark_tsc_unstable("TSC halts in idle");
}
}
+#else
+static void tsc_check_state(int state) { return; }
#endif
static int acpi_processor_get_power_info_fadt(struct acpi_processor *pr)
@@ -578,14 +605,9 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
pr->power.timer_broadcast_on_state = INT_MAX;
- for (i = 1; i < ACPI_PROCESSOR_MAX_POWER; i++) {
+ for (i = 1; i < ACPI_PROCESSOR_MAX_POWER && i <= max_cstate; i++) {
struct acpi_processor_cx *cx = &pr->power.states[i];
-#if defined (CONFIG_GENERIC_TIME) && defined (CONFIG_X86)
- /* TSC could halt in idle, so notify users */
- if (tsc_halts_in_c(cx->type))
- mark_tsc_unstable("TSC halts in idle");;
-#endif
switch (cx->type) {
case ACPI_STATE_C1:
cx->valid = 1;
@@ -603,6 +625,8 @@ static int acpi_processor_power_verify(struct acpi_processor *pr)
acpi_timer_check_state(i, pr, cx);
break;
}
+ if (cx->valid)
+ tsc_check_state(cx->type);
if (cx->valid)
working++;
diff --git a/drivers/acpi/processor_throttling.c b/drivers/acpi/processor_throttling.c
index d0d1f4d5043..7f16f5f8e7d 100644
--- a/drivers/acpi/processor_throttling.c
+++ b/drivers/acpi/processor_throttling.c
@@ -45,6 +45,14 @@
#define _COMPONENT ACPI_PROCESSOR_COMPONENT
ACPI_MODULE_NAME("processor_throttling");
+/* ignore_tpc:
+ * 0 -> acpi processor driver doesn't ignore _TPC values
+ * 1 -> acpi processor driver ignores _TPC values
+ */
+static int ignore_tpc;
+module_param(ignore_tpc, int, 0644);
+MODULE_PARM_DESC(ignore_tpc, "Disable broken BIOS _TPC throttling support");
+
struct throttling_tstate {
unsigned int cpu; /* cpu nr */
int target_state; /* target T-state */
@@ -283,6 +291,10 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
if (!pr)
return -EINVAL;
+
+ if (ignore_tpc)
+ goto end;
+
status = acpi_evaluate_integer(pr->handle, "_TPC", NULL, &tpc);
if (ACPI_FAILURE(status)) {
if (status != AE_NOT_FOUND) {
@@ -290,6 +302,8 @@ static int acpi_processor_get_platform_limit(struct acpi_processor *pr)
}
return -ENODEV;
}
+
+end:
pr->throttling_platform_limit = (int)tpc;
return 0;
}
@@ -302,6 +316,9 @@ int acpi_processor_tstate_has_changed(struct acpi_processor *pr)
struct acpi_processor_limit *limit;
int target_state;
+ if (ignore_tpc)
+ return 0;
+
result = acpi_processor_get_platform_limit(pr);
if (result) {
/* Throttling Limit is unsupported */
@@ -821,6 +838,14 @@ static int acpi_processor_get_throttling_ptc(struct acpi_processor *pr)
ret = acpi_read_throttling_status(pr, &value);
if (ret >= 0) {
state = acpi_get_throttling_state(pr, value);
+ if (state == -1) {
+ ACPI_WARNING((AE_INFO,
+ "Invalid throttling state, reset\n"));
+ state = 0;
+ ret = acpi_processor_set_throttling(pr, state);
+ if (ret)
+ return ret;
+ }
pr->throttling.state = state;
}
diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c
index d7ff61c0d57..810cca90ca7 100644
--- a/drivers/acpi/video.c
+++ b/drivers/acpi/video.c
@@ -538,6 +538,41 @@ acpi_video_device_lcd_set_level(struct acpi_video_device *device, int level)
return -EINVAL;
}
+/*
+ * For some buggy _BQC methods, we need to add a constant value to
+ * the _BQC return value to get the actual current brightness level
+ */
+
+static int bqc_offset_aml_bug_workaround;
+static int __init video_set_bqc_offset(const struct dmi_system_id *d)
+{
+ bqc_offset_aml_bug_workaround = 9;
+ return 0;
+}
+
+static struct dmi_system_id video_dmi_table[] __initdata = {
+ /*
+ * Broken _BQC workaround http://bugzilla.kernel.org/show_bug.cgi?id=13121
+ */
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "Acer Aspire 5720",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5720"),
+ },
+ },
+ {
+ .callback = video_set_bqc_offset,
+ .ident = "Acer Aspire 5710Z",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_VENDOR, "Acer"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Aspire 5710Z"),
+ },
+ },
+ {}
+};
+
static int
acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
unsigned long long *level)
@@ -557,6 +592,7 @@ acpi_video_device_lcd_get_level_current(struct acpi_video_device *device,
*level = device->brightness->levels[*level + 2];
}
+ *level += bqc_offset_aml_bug_workaround;
device->brightness->curr = *level;
return 0;
} else {
@@ -2290,6 +2326,8 @@ EXPORT_SYMBOL(acpi_video_register);
static int __init acpi_video_init(void)
{
+ dmi_check_system(video_dmi_table);
+
if (intel_opregion_present())
return 0;
diff --git a/drivers/ata/ata_piix.c b/drivers/ata/ata_piix.c
index 942d14ac879..d51a17c0f59 100644
--- a/drivers/ata/ata_piix.c
+++ b/drivers/ata/ata_piix.c
@@ -72,6 +72,7 @@
* ICH2 spec c #20 - IDE PRD must not cross a 64K boundary
* and must be dword aligned
* ICH2 spec c #24 - UDMA mode 4,5 t85/86 should be 6ns not 3.3
+ * ICH7 errata #16 - MWDMA1 timings are incorrect
*
* Should have been BIOS fixed:
* 450NX: errata #19 - DMA hangs on old 450NX
@@ -94,7 +95,7 @@
#include <linux/dmi.h>
#define DRV_NAME "ata_piix"
-#define DRV_VERSION "2.12"
+#define DRV_VERSION "2.13"
enum {
PIIX_IOCFG = 0x54, /* IDE I/O configuration register */
@@ -136,6 +137,7 @@ enum piix_controller_ids {
ich_pata_33, /* ICH up to UDMA 33 only */
ich_pata_66, /* ICH up to 66 Mhz */
ich_pata_100, /* ICH up to UDMA 100 */
+ ich_pata_100_nomwdma1, /* ICH up to UDMA 100 but with no MWDMA1*/
ich5_sata,
ich6_sata,
ich6m_sata,
@@ -216,8 +218,8 @@ static const struct pci_device_id piix_pci_tbl[] = {
/* ICH6 (and 6) (i915) UDMA 100 */
{ 0x8086, 0x266F, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
/* ICH7/7-R (i945, i975) UDMA 100*/
- { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
- { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
+ { 0x8086, 0x27DF, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 },
+ { 0x8086, 0x269E, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100_nomwdma1 },
/* ICH8 Mobile PATA Controller */
{ 0x8086, 0x2850, PCI_ANY_ID, PCI_ANY_ID, 0, 0, ich_pata_100 },
@@ -487,6 +489,15 @@ static struct ata_port_info piix_port_info[] = {
.port_ops = &ich_pata_ops,
},
+ [ich_pata_100_nomwdma1] =
+ {
+ .flags = PIIX_PATA_FLAGS | PIIX_FLAG_CHECKINTR,
+ .pio_mask = ATA_PIO4,
+ .mwdma_mask = ATA_MWDMA2_ONLY,
+ .udma_mask = ATA_UDMA5,
+ .port_ops = &ich_pata_ops,
+ },
+
[ich5_sata] =
{
.flags = PIIX_SATA_FLAGS,
@@ -594,6 +605,7 @@ static const struct ich_laptop ich_laptop[] = {
{ 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */
{ 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */
{ 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
+ { 0x27df, 0x104d, 0x900e }, /* ICH7 on Sony TZ-90 */
/* end marker */
{ 0, }
};
diff --git a/drivers/ata/libata-core.c b/drivers/ata/libata-core.c
index 17c5d48a75d..c9242301cfa 100644
--- a/drivers/ata/libata-core.c
+++ b/drivers/ata/libata-core.c
@@ -4091,7 +4091,9 @@ int ata_dev_revalidate(struct ata_device *dev, unsigned int new_class,
/* fail early if !ATA && !ATAPI to avoid issuing [P]IDENTIFY to PMP */
if (ata_class_enabled(new_class) &&
- new_class != ATA_DEV_ATA && new_class != ATA_DEV_ATAPI) {
+ new_class != ATA_DEV_ATA &&
+ new_class != ATA_DEV_ATAPI &&
+ new_class != ATA_DEV_SEMB) {
ata_dev_printk(dev, KERN_INFO, "class mismatch %u != %u\n",
dev->class, new_class);
rc = -ENODEV;
diff --git a/drivers/ata/libata-eh.c b/drivers/ata/libata-eh.c
index 01831312c36..94919ad03df 100644
--- a/drivers/ata/libata-eh.c
+++ b/drivers/ata/libata-eh.c
@@ -2783,6 +2783,12 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
} else if (dev->class == ATA_DEV_UNKNOWN &&
ehc->tries[dev->devno] &&
ata_class_enabled(ehc->classes[dev->devno])) {
+ /* Temporarily set dev->class, it will be
+ * permanently set once all configurations are
+ * complete. This is necessary because new
+ * device configuration is done in two
+ * separate loops.
+ */
dev->class = ehc->classes[dev->devno];
if (dev->class == ATA_DEV_PMP)
@@ -2790,6 +2796,11 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
else
rc = ata_dev_read_id(dev, &dev->class,
readid_flags, dev->id);
+
+ /* read_id might have changed class, store and reset */
+ ehc->classes[dev->devno] = dev->class;
+ dev->class = ATA_DEV_UNKNOWN;
+
switch (rc) {
case 0:
/* clear error info accumulated during probe */
@@ -2799,13 +2810,11 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
case -ENOENT:
/* IDENTIFY was issued to non-existent
* device. No need to reset. Just
- * thaw and kill the device.
+ * thaw and ignore the device.
*/
ata_eh_thaw_port(ap);
- dev->class = ATA_DEV_UNKNOWN;
break;
default:
- dev->class = ATA_DEV_UNKNOWN;
goto err;
}
}
@@ -2826,11 +2835,15 @@ static int ata_eh_revalidate_and_attach(struct ata_link *link,
dev->class == ATA_DEV_PMP)
continue;
+ dev->class = ehc->classes[dev->devno];
+
ehc->i.flags |= ATA_EHI_PRINTINFO;
rc = ata_dev_configure(dev);
ehc->i.flags &= ~ATA_EHI_PRINTINFO;
- if (rc)
+ if (rc) {
+ dev->class = ATA_DEV_UNKNOWN;
goto err;
+ }
spin_lock_irqsave(ap->lock, flags);
ap->pflags |= ATA_PFLAG_SCSI_HOTPLUG;
@@ -3494,6 +3507,8 @@ static void ata_eh_handle_port_suspend(struct ata_port *ap)
*/
static void ata_eh_handle_port_resume(struct ata_port *ap)
{
+ struct ata_link *link;
+ struct ata_device *dev;
unsigned long flags;
int rc = 0;
@@ -3508,6 +3523,17 @@ static void ata_eh_handle_port_resume(struct ata_port *ap)
WARN_ON(!(ap->pflags & ATA_PFLAG_SUSPENDED));
+ /*
+ * Error timestamps are in jiffies which doesn't run while
+ * suspended and PHY events during resume isn't too uncommon.
+ * When the two are combined, it can lead to unnecessary speed
+ * downs if the machine is suspended and resumed repeatedly.
+ * Clear error history.
+ */
+ ata_for_each_link(link, ap, HOST_FIRST)
+ ata_for_each_dev(dev, link, ALL)
+ ata_ering_clear(&dev->ering);
+
ata_acpi_set_state(ap, PMSG_ON);
if (ap->ops->port_resume)
diff --git a/drivers/ata/libata-scsi.c b/drivers/ata/libata-scsi.c
index 2733b0c90b7..342316064e9 100644
--- a/drivers/ata/libata-scsi.c
+++ b/drivers/ata/libata-scsi.c
@@ -313,7 +313,7 @@ ata_scsi_em_message_show(struct device *dev, struct device_attribute *attr,
return ap->ops->em_show(ap, buf);
return -EINVAL;
}
-DEVICE_ATTR(em_message, S_IRUGO | S_IWUGO,
+DEVICE_ATTR(em_message, S_IRUGO | S_IWUSR,
ata_scsi_em_message_show, ata_scsi_em_message_store);
EXPORT_SYMBOL_GPL(dev_attr_em_message);
@@ -366,7 +366,7 @@ ata_scsi_activity_store(struct device *dev, struct device_attribute *attr,
}
return -EINVAL;
}
-DEVICE_ATTR(sw_activity, S_IWUGO | S_IRUGO, ata_scsi_activity_show,
+DEVICE_ATTR(sw_activity, S_IWUSR | S_IRUGO, ata_scsi_activity_show,
ata_scsi_activity_store);
EXPORT_SYMBOL_GPL(dev_attr_sw_activity);
@@ -2142,13 +2142,14 @@ static unsigned int ata_scsiop_inq_89(struct ata_scsi_args *args, u8 *rbuf)
static unsigned int ata_scsiop_inq_b1(struct ata_scsi_args *args, u8 *rbuf)
{
+ int form_factor = ata_id_form_factor(args->id);
+ int media_rotation_rate = ata_id_rotation_rate(args->id);
+
rbuf[1] = 0xb1;
rbuf[3] = 0x3c;
- if (ata_id_major_version(args->id) > 7) {
- rbuf[4] = args->id[217] >> 8;
- rbuf[5] = args->id[217];
- rbuf[7] = args->id[168] & 0xf;
- }
+ rbuf[4] = media_rotation_rate >> 8;
+ rbuf[5] = media_rotation_rate;
+ rbuf[7] = form_factor;
return 0;
}
@@ -2376,7 +2377,23 @@ saving_not_supp:
*/
static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
{
- u64 last_lba = args->dev->n_sectors - 1; /* LBA of the last block */
+ struct ata_device *dev = args->dev;
+ u64 last_lba = dev->n_sectors - 1; /* LBA of the last block */
+ u8 log_per_phys = 0;
+ u16 lowest_aligned = 0;
+ u16 word_106 = dev->id[106];
+ u16 word_209 = dev->id[209];
+
+ if ((word_106 & 0xc000) == 0x4000) {
+ /* Number and offset of logical sectors per physical sector */
+ if (word_106 & (1 << 13))
+ log_per_phys = word_106 & 0xf;
+ if ((word_209 & 0xc000) == 0x4000) {
+ u16 first = dev->id[209] & 0x3fff;
+ if (first > 0)
+ lowest_aligned = (1 << log_per_phys) - first;
+ }
+ }
VPRINTK("ENTER\n");
@@ -2407,6 +2424,11 @@ static unsigned int ata_scsiop_read_cap(struct ata_scsi_args *args, u8 *rbuf)
/* sector size */
rbuf[10] = ATA_SECT_SIZE >> 8;
rbuf[11] = ATA_SECT_SIZE & 0xff;
+
+ rbuf[12] = 0;
+ rbuf[13] = log_per_phys;
+ rbuf[14] = (lowest_aligned >> 8) & 0x3f;
+ rbuf[15] = lowest_aligned;
}
return 0;
diff --git a/drivers/ata/pata_pdc202xx_old.c b/drivers/ata/pata_pdc202xx_old.c
index 5fedb3d4032..2f3c9bed63d 100644
--- a/drivers/ata/pata_pdc202xx_old.c
+++ b/drivers/ata/pata_pdc202xx_old.c
@@ -2,7 +2,7 @@
* pata_pdc202xx_old.c - Promise PDC202xx PATA for new ATA layer
* (C) 2005 Red Hat Inc
* Alan Cox <alan@lxorguk.ukuu.org.uk>
- * (C) 2007 Bartlomiej Zolnierkiewicz
+ * (C) 2007,2009 Bartlomiej Zolnierkiewicz
*
* Based in part on linux/drivers/ide/pci/pdc202xx_old.c
*
@@ -158,7 +158,7 @@ static void pdc2026x_bmdma_start(struct ata_queued_cmd *qc)
u32 len;
/* Check we keep host level locking here */
- if (adev->dma_mode >= XFER_UDMA_2)
+ if (adev->dma_mode > XFER_UDMA_2)
iowrite8(ioread8(clock) | sel66, clock);
else
iowrite8(ioread8(clock) & ~sel66, clock);
@@ -212,7 +212,7 @@ static void pdc2026x_bmdma_stop(struct ata_queued_cmd *qc)
iowrite8(ioread8(clock) & ~sel66, clock);
}
/* Flip back to 33Mhz for PIO */
- if (adev->dma_mode >= XFER_UDMA_2)
+ if (adev->dma_mode > XFER_UDMA_2)
iowrite8(ioread8(clock) & ~sel66, clock);
ata_bmdma_stop(qc);
pdc202xx_set_piomode(ap, adev);
diff --git a/drivers/ata/sata_fsl.c b/drivers/ata/sata_fsl.c
index c2e90e1fece..36b8629203b 100644
--- a/drivers/ata/sata_fsl.c
+++ b/drivers/ata/sata_fsl.c
@@ -205,6 +205,7 @@ struct cmdhdr_tbl_entry {
* Description information bitdefs
*/
enum {
+ CMD_DESC_RES = (1 << 11),
VENDOR_SPECIFIC_BIST = (1 << 10),
CMD_DESC_SNOOP_ENABLE = (1 << 9),
FPDMA_QUEUED_CMD = (1 << 8),
@@ -332,13 +333,14 @@ static unsigned int sata_fsl_fill_sg(struct ata_queued_cmd *qc, void *cmd_desc,
dma_addr_t sg_addr = sg_dma_address(sg);
u32 sg_len = sg_dma_len(sg);
- VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%x, sg_len = %d\n",
- sg_addr, sg_len);
+ VPRINTK("SATA FSL : fill_sg, sg_addr = 0x%llx, sg_len = %d\n",
+ (unsigned long long)sg_addr, sg_len);
/* warn if each s/g element is not dword aligned */
if (sg_addr & 0x03)
ata_port_printk(qc->ap, KERN_ERR,
- "s/g addr unaligned : 0x%x\n", sg_addr);
+ "s/g addr unaligned : 0x%llx\n",
+ (unsigned long long)sg_addr);
if (sg_len & 0x03)
ata_port_printk(qc->ap, KERN_ERR,
"s/g len unaligned : 0x%x\n", sg_len);
@@ -387,7 +389,7 @@ static void sata_fsl_qc_prep(struct ata_queued_cmd *qc)
void __iomem *hcr_base = host_priv->hcr_base;
unsigned int tag = sata_fsl_tag(qc->tag, hcr_base);
struct command_desc *cd;
- u32 desc_info = CMD_DESC_SNOOP_ENABLE;
+ u32 desc_info = CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE;
u32 num_prde = 0;
u32 ttl_dwords = 0;
dma_addr_t cd_paddr;
@@ -840,7 +842,7 @@ issue_srst:
/* device reset/SRST is a control register update FIS, uses tag0 */
sata_fsl_setup_cmd_hdr_entry(pp, 0,
- SRST_CMD | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
+ SRST_CMD | CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
tf.ctl |= ATA_SRST; /* setup SRST bit in taskfile control reg */
ata_tf_to_fis(&tf, pmp, 0, cfis);
@@ -886,7 +888,8 @@ issue_srst:
* using ATA signature D2H register FIS to the host controller.
*/
- sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_SNOOP_ENABLE, 0, 0, 5);
+ sata_fsl_setup_cmd_hdr_entry(pp, 0, CMD_DESC_RES | CMD_DESC_SNOOP_ENABLE,
+ 0, 0, 5);
tf.ctl &= ~ATA_SRST; /* 2nd H2D Ctl. register FIS */
ata_tf_to_fis(&tf, pmp, 0, cfis);
diff --git a/drivers/ata/sata_mv.c b/drivers/ata/sata_mv.c
index 870dcfd8235..23714aefb82 100644
--- a/drivers/ata/sata_mv.c
+++ b/drivers/ata/sata_mv.c
@@ -293,6 +293,10 @@ enum {
FISCFG_WAIT_DEV_ERR = (1 << 8), /* wait for host on DevErr */
FISCFG_SINGLE_SYNC = (1 << 16), /* SYNC on DMA activation */
+ PHY_MODE9_GEN2 = 0x398,
+ PHY_MODE9_GEN1 = 0x39c,
+ PHYCFG_OFS = 0x3a0, /* only in 65n devices */
+
MV5_PHY_MODE = 0x74,
MV5_LTMODE = 0x30,
MV5_PHY_CTL = 0x0C,
@@ -609,6 +613,8 @@ static int mv_soc_reset_hc(struct mv_host_priv *hpriv,
static void mv_soc_reset_flash(struct mv_host_priv *hpriv,
void __iomem *mmio);
static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio);
+static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int port);
static void mv_reset_pci_bus(struct ata_host *host, void __iomem *mmio);
static void mv_reset_channel(struct mv_host_priv *hpriv, void __iomem *mmio,
unsigned int port_no);
@@ -807,6 +813,14 @@ static const struct mv_hw_ops mv_soc_ops = {
.reset_bus = mv_soc_reset_bus,
};
+static const struct mv_hw_ops mv_soc_65n_ops = {
+ .phy_errata = mv_soc_65n_phy_errata,
+ .enable_leds = mv_soc_enable_leds,
+ .reset_hc = mv_soc_reset_hc,
+ .reset_flash = mv_soc_reset_flash,
+ .reset_bus = mv_soc_reset_bus,
+};
+
/*
* Functions
*/
@@ -3397,6 +3411,53 @@ static void mv_soc_reset_bus(struct ata_host *host, void __iomem *mmio)
return;
}
+static void mv_soc_65n_phy_errata(struct mv_host_priv *hpriv,
+ void __iomem *mmio, unsigned int port)
+{
+ void __iomem *port_mmio = mv_port_base(mmio, port);
+ u32 reg;
+
+ reg = readl(port_mmio + PHY_MODE3);
+ reg &= ~(0x3 << 27); /* SELMUPF (bits 28:27) to 1 */
+ reg |= (0x1 << 27);
+ reg &= ~(0x3 << 29); /* SELMUPI (bits 30:29) to 1 */
+ reg |= (0x1 << 29);
+ writel(reg, port_mmio + PHY_MODE3);
+
+ reg = readl(port_mmio + PHY_MODE4);
+ reg &= ~0x1; /* SATU_OD8 (bit 0) to 0, reserved bit 16 must be set */
+ reg |= (0x1 << 16);
+ writel(reg, port_mmio + PHY_MODE4);
+
+ reg = readl(port_mmio + PHY_MODE9_GEN2);
+ reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */
+ reg |= 0x8;
+ reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */
+ writel(reg, port_mmio + PHY_MODE9_GEN2);
+
+ reg = readl(port_mmio + PHY_MODE9_GEN1);
+ reg &= ~0xf; /* TXAMP[3:0] (bits 3:0) to 8 */
+ reg |= 0x8;
+ reg &= ~(0x1 << 14); /* TXAMP[4] (bit 14) to 0 */
+ writel(reg, port_mmio + PHY_MODE9_GEN1);
+}
+
+/**
+ * soc_is_65 - check if the soc is 65 nano device
+ *
+ * Detect the type of the SoC, this is done by reading the PHYCFG_OFS
+ * register, this register should contain non-zero value and it exists only
+ * in the 65 nano devices, when reading it from older devices we get 0.
+ */
+static bool soc_is_65n(struct mv_host_priv *hpriv)
+{
+ void __iomem *port0_mmio = mv_port_base(hpriv->base, 0);
+
+ if (readl(port0_mmio + PHYCFG_OFS))
+ return true;
+ return false;
+}
+
static void mv_setup_ifcfg(void __iomem *port_mmio, int want_gen2i)
{
u32 ifcfg = readl(port_mmio + SATA_IFCFG);
@@ -3737,7 +3798,10 @@ static int mv_chip_id(struct ata_host *host, unsigned int board_idx)
}
break;
case chip_soc:
- hpriv->ops = &mv_soc_ops;
+ if (soc_is_65n(hpriv))
+ hpriv->ops = &mv_soc_65n_ops;
+ else
+ hpriv->ops = &mv_soc_ops;
hp_flags |= MV_HP_FLAG_SOC | MV_HP_GEN_IIE |
MV_HP_ERRATA_60X1C0;
break;
@@ -3800,7 +3864,8 @@ static int mv_init_host(struct ata_host *host, unsigned int board_idx)
n_hc = mv_get_hc_count(host->ports[0]->flags);
for (port = 0; port < host->n_ports; port++)
- hpriv->ops->read_preamp(hpriv, port, mmio);
+ if (hpriv->ops->read_preamp)
+ hpriv->ops->read_preamp(hpriv, port, mmio);
rc = hpriv->ops->reset_hc(hpriv, mmio, n_hc);
if (rc)
diff --git a/drivers/ata/sata_sx4.c b/drivers/ata/sata_sx4.c
index dce3dccced3..eb05a3c82a9 100644
--- a/drivers/ata/sata_sx4.c
+++ b/drivers/ata/sata_sx4.c
@@ -213,8 +213,9 @@ struct pdc_host_priv {
static int pdc_sata_init_one(struct pci_dev *pdev, const struct pci_device_id *ent);
-static void pdc_eng_timeout(struct ata_port *ap);
-static void pdc_20621_phy_reset(struct ata_port *ap);
+static void pdc_error_handler(struct ata_port *ap);
+static void pdc_freeze(struct ata_port *ap);
+static void pdc_thaw(struct ata_port *ap);
static int pdc_port_start(struct ata_port *ap);
static void pdc20621_qc_prep(struct ata_queued_cmd *qc);
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf);
@@ -233,6 +234,10 @@ static void pdc20621_put_to_dimm(struct ata_host *host,
void *psource, u32 offset, u32 size);
static void pdc20621_irq_clear(struct ata_port *ap);
static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc);
+static int pdc_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline);
+static void pdc_post_internal_cmd(struct ata_queued_cmd *qc);
+static int pdc_check_atapi_dma(struct ata_queued_cmd *qc);
static struct scsi_host_template pdc_sata_sht = {
@@ -243,20 +248,24 @@ static struct scsi_host_template pdc_sata_sht = {
/* TODO: inherit from base port_ops after converting to new EH */
static struct ata_port_operations pdc_20621_ops = {
- .sff_tf_load = pdc_tf_load_mmio,
- .sff_tf_read = ata_sff_tf_read,
- .sff_check_status = ata_sff_check_status,
- .sff_exec_command = pdc_exec_command_mmio,
- .sff_dev_select = ata_sff_dev_select,
- .phy_reset = pdc_20621_phy_reset,
+ .inherits = &ata_sff_port_ops,
+
+ .check_atapi_dma = pdc_check_atapi_dma,
.qc_prep = pdc20621_qc_prep,
.qc_issue = pdc20621_qc_issue,
- .qc_fill_rtf = ata_sff_qc_fill_rtf,
- .sff_data_xfer = ata_sff_data_xfer,
- .eng_timeout = pdc_eng_timeout,
- .sff_irq_clear = pdc20621_irq_clear,
- .sff_irq_on = ata_sff_irq_on,
+
+ .freeze = pdc_freeze,
+ .thaw = pdc_thaw,
+ .softreset = pdc_softreset,
+ .error_handler = pdc_error_handler,
+ .lost_interrupt = ATA_OP_NULL,
+ .post_internal_cmd = pdc_post_internal_cmd,
+
.port_start = pdc_port_start,
+
+ .sff_tf_load = pdc_tf_load_mmio,
+ .sff_exec_command = pdc_exec_command_mmio,
+ .sff_irq_clear = pdc20621_irq_clear,
};
static const struct ata_port_info pdc_port_info[] = {
@@ -310,14 +319,6 @@ static int pdc_port_start(struct ata_port *ap)
return 0;
}
-static void pdc_20621_phy_reset(struct ata_port *ap)
-{
- VPRINTK("ENTER\n");
- ap->cbl = ATA_CBL_SATA;
- ata_port_probe(ap);
- ata_bus_reset(ap);
-}
-
static inline void pdc20621_ata_sg(struct ata_taskfile *tf, u8 *buf,
unsigned int portno,
unsigned int total_len)
@@ -686,8 +687,11 @@ static void pdc20621_packet_start(struct ata_queued_cmd *qc)
static unsigned int pdc20621_qc_issue(struct ata_queued_cmd *qc)
{
switch (qc->tf.protocol) {
- case ATA_PROT_DMA:
case ATA_PROT_NODATA:
+ if (qc->tf.flags & ATA_TFLAG_POLLING)
+ break;
+ /*FALLTHROUGH*/
+ case ATA_PROT_DMA:
pdc20621_packet_start(qc);
return 0;
@@ -786,12 +790,7 @@ static inline unsigned int pdc20621_host_intr(struct ata_port *ap,
static void pdc20621_irq_clear(struct ata_port *ap)
{
- struct ata_host *host = ap->host;
- void __iomem *mmio = host->iomap[PDC_MMIO_BAR];
-
- mmio += PDC_CHIP0_OFS;
-
- readl(mmio + PDC_20621_SEQMASK);
+ ioread8(ap->ioaddr.status_addr);
}
static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance)
@@ -859,46 +858,119 @@ static irqreturn_t pdc20621_interrupt(int irq, void *dev_instance)
return IRQ_RETVAL(handled);
}
-static void pdc_eng_timeout(struct ata_port *ap)
+static void pdc_freeze(struct ata_port *ap)
{
- u8 drv_stat;
- struct ata_host *host = ap->host;
- struct ata_queued_cmd *qc;
- unsigned long flags;
+ void __iomem *mmio = ap->ioaddr.cmd_addr;
+ u32 tmp;
- DPRINTK("ENTER\n");
+ /* FIXME: if all 4 ATA engines are stopped, also stop HDMA engine */
- spin_lock_irqsave(&host->lock, flags);
+ tmp = readl(mmio + PDC_CTLSTAT);
+ tmp |= PDC_MASK_INT;
+ tmp &= ~PDC_DMA_ENABLE;
+ writel(tmp, mmio + PDC_CTLSTAT);
+ readl(mmio + PDC_CTLSTAT); /* flush */
+}
- qc = ata_qc_from_tag(ap, ap->link.active_tag);
+static void pdc_thaw(struct ata_port *ap)
+{
+ void __iomem *mmio = ap->ioaddr.cmd_addr;
+ u32 tmp;
- switch (qc->tf.protocol) {
- case ATA_PROT_DMA:
- case ATA_PROT_NODATA:
- ata_port_printk(ap, KERN_ERR, "command timeout\n");
- qc->err_mask |= __ac_err_mask(ata_wait_idle(ap));
- break;
+ /* FIXME: start HDMA engine, if zero ATA engines running */
- default:
- drv_stat = ata_sff_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
+ /* clear IRQ */
+ ioread8(ap->ioaddr.status_addr);
- ata_port_printk(ap, KERN_ERR,
- "unknown timeout, cmd 0x%x stat 0x%x\n",
- qc->tf.command, drv_stat);
+ /* turn IRQ back on */
+ tmp = readl(mmio + PDC_CTLSTAT);
+ tmp &= ~PDC_MASK_INT;
+ writel(tmp, mmio + PDC_CTLSTAT);
+ readl(mmio + PDC_CTLSTAT); /* flush */
+}
- qc->err_mask |= ac_err_mask(drv_stat);
- break;
+static void pdc_reset_port(struct ata_port *ap)
+{
+ void __iomem *mmio = ap->ioaddr.cmd_addr + PDC_CTLSTAT;
+ unsigned int i;
+ u32 tmp;
+
+ /* FIXME: handle HDMA copy engine */
+
+ for (i = 11; i > 0; i--) {
+ tmp = readl(mmio);
+ if (tmp & PDC_RESET)
+ break;
+
+ udelay(100);
+
+ tmp |= PDC_RESET;
+ writel(tmp, mmio);
}
- spin_unlock_irqrestore(&host->lock, flags);
- ata_eh_qc_complete(qc);
- DPRINTK("EXIT\n");
+ tmp &= ~PDC_RESET;
+ writel(tmp, mmio);
+ readl(mmio); /* flush */
+}
+
+static int pdc_softreset(struct ata_link *link, unsigned int *class,
+ unsigned long deadline)
+{
+ pdc_reset_port(link->ap);
+ return ata_sff_softreset(link, class, deadline);
+}
+
+static void pdc_error_handler(struct ata_port *ap)
+{
+ if (!(ap->pflags & ATA_PFLAG_FROZEN))
+ pdc_reset_port(ap);
+
+ ata_std_error_handler(ap);
+}
+
+static void pdc_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ /* make DMA engine forget about the failed command */
+ if (qc->flags & ATA_QCFLAG_FAILED)
+ pdc_reset_port(ap);
+}
+
+static int pdc_check_atapi_dma(struct ata_queued_cmd *qc)
+{
+ u8 *scsicmd = qc->scsicmd->cmnd;
+ int pio = 1; /* atapi dma off by default */
+
+ /* Whitelist commands that may use DMA. */
+ switch (scsicmd[0]) {
+ case WRITE_12:
+ case WRITE_10:
+ case WRITE_6:
+ case READ_12:
+ case READ_10:
+ case READ_6:
+ case 0xad: /* READ_DVD_STRUCTURE */
+ case 0xbe: /* READ_CD */
+ pio = 0;
+ }
+ /* -45150 (FFFF4FA2) to -1 (FFFFFFFF) shall use PIO mode */
+ if (scsicmd[0] == WRITE_10) {
+ unsigned int lba =
+ (scsicmd[2] << 24) |
+ (scsicmd[3] << 16) |
+ (scsicmd[4] << 8) |
+ scsicmd[5];
+ if (lba >= 0xFFFF4FA2)
+ pio = 1;
+ }
+ return pio;
}
static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
WARN_ON(tf->protocol == ATA_PROT_DMA ||
- tf->protocol == ATA_PROT_NODATA);
+ tf->protocol == ATAPI_PROT_DMA);
ata_sff_tf_load(ap, tf);
}
@@ -906,7 +978,7 @@ static void pdc_tf_load_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
static void pdc_exec_command_mmio(struct ata_port *ap, const struct ata_taskfile *tf)
{
WARN_ON(tf->protocol == ATA_PROT_DMA ||
- tf->protocol == ATA_PROT_NODATA);
+ tf->protocol == ATAPI_PROT_DMA);
ata_sff_exec_command(ap, tf);
}
diff --git a/drivers/base/iommu.c b/drivers/base/iommu.c
index 9f0e672f4be..8ad4ffea692 100644
--- a/drivers/base/iommu.c
+++ b/drivers/base/iommu.c
@@ -18,6 +18,8 @@
#include <linux/bug.h>
#include <linux/types.h>
+#include <linux/module.h>
+#include <linux/slab.h>
#include <linux/errno.h>
#include <linux/iommu.h>
diff --git a/drivers/base/platform.c b/drivers/base/platform.c
index b5b6c973a2e..8b4708e0624 100644
--- a/drivers/base/platform.c
+++ b/drivers/base/platform.c
@@ -217,7 +217,6 @@ int platform_device_add_data(struct platform_device *pdev, const void *data,
if (d) {
memcpy(d, data, size);
pdev->dev.platform_data = d;
- pdev->platform_data = d;
}
return d ? 0 : -ENOMEM;
}
@@ -247,21 +246,6 @@ int platform_device_add(struct platform_device *pdev)
else
dev_set_name(&pdev->dev, pdev->name);
- /* We will remove platform_data field from struct device
- * if all platform devices pass its platform specific data
- * from platform_device. The conversion is going to be a
- * long time, so we allow the two cases coexist to make
- * this kind of fix more easily*/
- if (pdev->platform_data && pdev->dev.platform_data) {
- printk(KERN_ERR
- "%s: use which platform_data?\n",
- dev_name(&pdev->dev));
- } else if (pdev->platform_data) {
- pdev->dev.platform_data = pdev->platform_data;
- } else if (pdev->dev.platform_data) {
- pdev->platform_data = pdev->dev.platform_data;
- }
-
for (i = 0; i < pdev->num_resources; i++) {
struct resource *p, *r = &pdev->resource[i];
@@ -1028,7 +1012,7 @@ static __initdata LIST_HEAD(early_platform_device_list);
/**
* early_platform_driver_register
- * @edrv: early_platform driver structure
+ * @epdrv: early_platform driver structure
* @buf: string passed from early_param()
*/
int __init early_platform_driver_register(struct early_platform_driver *epdrv,
@@ -1112,7 +1096,7 @@ void __init early_platform_driver_register_all(char *class_str)
/**
* early_platform_match
- * @edrv: early platform driver structure
+ * @epdrv: early platform driver structure
* @id: id to match against
*/
static __init struct platform_device *
@@ -1130,7 +1114,7 @@ early_platform_match(struct early_platform_driver *epdrv, int id)
/**
* early_platform_left
- * @edrv: early platform driver structure
+ * @epdrv: early platform driver structure
* @id: return true if id or above exists
*/
static __init int early_platform_left(struct early_platform_driver *epdrv,
diff --git a/drivers/block/xen-blkfront.c b/drivers/block/xen-blkfront.c
index 8f905089b72..a6cbf7b808e 100644
--- a/drivers/block/xen-blkfront.c
+++ b/drivers/block/xen-blkfront.c
@@ -934,8 +934,6 @@ static void blkfront_closing(struct xenbus_device *dev)
spin_lock_irqsave(&blkif_io_lock, flags);
- del_gendisk(info->gd);
-
/* No more blkif_request(). */
blk_stop_queue(info->rq);
@@ -949,6 +947,8 @@ static void blkfront_closing(struct xenbus_device *dev)
blk_cleanup_queue(info->rq);
info->rq = NULL;
+ del_gendisk(info->gd);
+
out:
xenbus_frontend_closed(dev);
}
@@ -977,8 +977,10 @@ static void backend_changed(struct xenbus_device *dev,
break;
case XenbusStateClosing:
- if (info->gd == NULL)
- xenbus_dev_fatal(dev, -ENODEV, "gd is NULL");
+ if (info->gd == NULL) {
+ xenbus_frontend_closed(dev);
+ break;
+ }
bd = bdget_disk(info->gd, 0);
if (bd == NULL)
xenbus_dev_fatal(dev, -ENODEV, "bdget failed");
diff --git a/drivers/cdrom/viocd.c b/drivers/cdrom/viocd.c
index 13929356135..9b1624e0dde 100644
--- a/drivers/cdrom/viocd.c
+++ b/drivers/cdrom/viocd.c
@@ -587,7 +587,7 @@ static int viocd_probe(struct vio_dev *vdev, const struct vio_device_id *id)
struct device_node *node = vdev->dev.archdata.of_node;
deviceno = vdev->unit_address;
- if (deviceno > VIOCD_MAX_CD)
+ if (deviceno >= VIOCD_MAX_CD)
return -ENODEV;
if (!node)
return -ENODEV;
diff --git a/drivers/char/ipmi/ipmi_msghandler.c b/drivers/char/ipmi/ipmi_msghandler.c
index aa83a0865ec..09050797c76 100644
--- a/drivers/char/ipmi/ipmi_msghandler.c
+++ b/drivers/char/ipmi/ipmi_msghandler.c
@@ -2856,6 +2856,7 @@ int ipmi_register_smi(struct ipmi_smi_handlers *handlers,
/* Assume a single IPMB channel at zero. */
intf->channels[0].medium = IPMI_CHANNEL_MEDIUM_IPMB;
intf->channels[0].protocol = IPMI_CHANNEL_PROTOCOL_IPMB;
+ intf->curr_channel = IPMI_MAX_CHANNELS;
}
if (rv == 0)
@@ -3648,13 +3649,13 @@ static int handle_new_recv_msg(ipmi_smi_t intf,
}
/*
- ** We need to make sure the channels have been initialized.
- ** The channel_handler routine will set the "curr_channel"
- ** equal to or greater than IPMI_MAX_CHANNELS when all the
- ** channels for this interface have been initialized.
- */
+ * We need to make sure the channels have been initialized.
+ * The channel_handler routine will set the "curr_channel"
+ * equal to or greater than IPMI_MAX_CHANNELS when all the
+ * channels for this interface have been initialized.
+ */
if (intf->curr_channel < IPMI_MAX_CHANNELS) {
- requeue = 1; /* Just put the message back for now */
+ requeue = 0; /* Throw the message away */
goto out;
}
diff --git a/drivers/char/random.c b/drivers/char/random.c
index f824ef8a927..8c7444857a4 100644
--- a/drivers/char/random.c
+++ b/drivers/char/random.c
@@ -1665,15 +1665,20 @@ EXPORT_SYMBOL(secure_dccp_sequence_number);
* value is not cryptographically secure but for several uses the cost of
* depleting entropy is too high
*/
+DEFINE_PER_CPU(__u32 [4], get_random_int_hash);
unsigned int get_random_int(void)
{
- /*
- * Use IP's RNG. It suits our purpose perfectly: it re-keys itself
- * every second, from the entropy pool (and thus creates a limited
- * drain on it), and uses halfMD4Transform within the second. We
- * also mix it with jiffies and the PID:
- */
- return secure_ip_id((__force __be32)(current->pid + jiffies));
+ struct keydata *keyptr;
+ __u32 *hash = get_cpu_var(get_random_int_hash);
+ int ret;
+
+ keyptr = get_keyptr();
+ hash[0] += current->pid + jiffies + get_cycles();
+
+ ret = half_md4_transform(hash, keyptr->secret);
+ put_cpu_var(get_random_int_hash);
+
+ return ret;
}
/*
diff --git a/drivers/char/sysrq.c b/drivers/char/sysrq.c
index b0a6a3e5192..d6a807f4077 100644
--- a/drivers/char/sysrq.c
+++ b/drivers/char/sysrq.c
@@ -406,7 +406,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = {
&sysrq_showlocks_op, /* d */
&sysrq_term_op, /* e */
&sysrq_moom_op, /* f */
- /* g: May be registered by ppc for kgdb */
+ /* g: May be registered for the kernel debugger */
NULL, /* g */
NULL, /* h - reserved for help */
&sysrq_kill_op, /* i */
@@ -431,7 +431,7 @@ static struct sysrq_key_op *sysrq_key_table[36] = {
&sysrq_sync_op, /* s */
&sysrq_showstate_op, /* t */
&sysrq_mountro_op, /* u */
- /* v: May be registered at init time by SMP VOYAGER */
+ /* v: May be registered for frame buffer console restore */
NULL, /* v */
&sysrq_showstate_blocked_op, /* w */
/* x: May be registered on ppc/powerpc for xmon */
diff --git a/drivers/char/tpm/tpm_bios.c b/drivers/char/tpm/tpm_bios.c
index ed306eb1057..0c2f55a38b9 100644
--- a/drivers/char/tpm/tpm_bios.c
+++ b/drivers/char/tpm/tpm_bios.c
@@ -212,7 +212,8 @@ static int get_event_name(char *dest, struct tcpa_event *event,
unsigned char * event_entry)
{
const char *name = "";
- char data[40] = "";
+ /* 41 so there is room for 40 data and 1 nul */
+ char data[41] = "";
int i, n_len = 0, d_len = 0;
struct tcpa_pc_event *pc_event;
diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c
index a2dee0eb6da..e6ce632a393 100644
--- a/drivers/char/vt_ioctl.c
+++ b/drivers/char/vt_ioctl.c
@@ -400,6 +400,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
case KIOCSOUND:
if (!perm)
goto eperm;
+ /* FIXME: This is an old broken API but we need to keep it
+ supported and somehow separate the historic advertised
+ tick rate from any real one */
if (arg)
arg = CLOCK_TICK_RATE / arg;
kd_mksound(arg, 0);
@@ -417,6 +420,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file,
*/
ticks = HZ * ((arg >> 16) & 0xffff) / 1000;
count = ticks ? (arg & 0xffff) : 0;
+ /* FIXME: This is an old broken API but we need to keep it
+ supported and somehow separate the historic advertised
+ tick rate from any real one */
if (count)
count = CLOCK_TICK_RATE / count;
kd_mksound(count, ticks);
diff --git a/drivers/crypto/ixp4xx_crypto.c b/drivers/crypto/ixp4xx_crypto.c
index f9f05d7a707..6c6656d3b1e 100644
--- a/drivers/crypto/ixp4xx_crypto.c
+++ b/drivers/crypto/ixp4xx_crypto.c
@@ -415,6 +415,7 @@ static void crypto_done_action(unsigned long arg)
static int init_ixp_crypto(void)
{
int ret = -ENODEV;
+ u32 msg[2] = { 0, 0 };
if (! ( ~(*IXP4XX_EXP_CFG2) & (IXP4XX_FEATURE_HASH |
IXP4XX_FEATURE_AES | IXP4XX_FEATURE_DES))) {
@@ -426,9 +427,35 @@ static int init_ixp_crypto(void)
return ret;
if (!npe_running(npe_c)) {
- npe_load_firmware(npe_c, npe_name(npe_c), dev);
+ ret = npe_load_firmware(npe_c, npe_name(npe_c), dev);
+ if (ret) {
+ return ret;
+ }
+ if (npe_recv_message(npe_c, msg, "STATUS_MSG"))
+ goto npe_error;
+ } else {
+ if (npe_send_message(npe_c, msg, "STATUS_MSG"))
+ goto npe_error;
+
+ if (npe_recv_message(npe_c, msg, "STATUS_MSG"))
+ goto npe_error;
}
+ switch ((msg[1]>>16) & 0xff) {
+ case 3:
+ printk(KERN_WARNING "Firmware of %s lacks AES support\n",
+ npe_name(npe_c));
+ support_aes = 0;
+ break;
+ case 4:
+ case 5:
+ support_aes = 1;
+ break;
+ default:
+ printk(KERN_ERR "Firmware of %s lacks crypto support\n",
+ npe_name(npe_c));
+ return -ENODEV;
+ }
/* buffer_pool will also be used to sometimes store the hmac,
* so assure it is large enough
*/
@@ -459,6 +486,10 @@ static int init_ixp_crypto(void)
qmgr_enable_irq(RECV_QID);
return 0;
+
+npe_error:
+ printk(KERN_ERR "%s not responding\n", npe_name(npe_c));
+ ret = -EIO;
err:
if (ctx_pool)
dma_pool_destroy(ctx_pool);
diff --git a/drivers/crypto/padlock-aes.c b/drivers/crypto/padlock-aes.c
index 3f0fdd18255..856b3cc2558 100644
--- a/drivers/crypto/padlock-aes.c
+++ b/drivers/crypto/padlock-aes.c
@@ -489,4 +489,4 @@ MODULE_DESCRIPTION("VIA PadLock AES algorithm support");
MODULE_LICENSE("GPL");
MODULE_AUTHOR("Michal Ludvig");
-MODULE_ALIAS("aes-all");
+MODULE_ALIAS("aes");
diff --git a/drivers/dma/dmaengine.c b/drivers/dma/dmaengine.c
index 92438e9dacc..5a87384ea4f 100644
--- a/drivers/dma/dmaengine.c
+++ b/drivers/dma/dmaengine.c
@@ -804,11 +804,14 @@ dma_async_memcpy_buf_to_buf(struct dma_chan *chan, void *dest,
dma_addr_t dma_dest, dma_src;
dma_cookie_t cookie;
int cpu;
+ unsigned long flags;
dma_src = dma_map_single(dev->dev, src, len, DMA_TO_DEVICE);
dma_dest = dma_map_single(dev->dev, dest, len, DMA_FROM_DEVICE);
- tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len,
- DMA_CTRL_ACK);
+ flags = DMA_CTRL_ACK |
+ DMA_COMPL_SRC_UNMAP_SINGLE |
+ DMA_COMPL_DEST_UNMAP_SINGLE;
+ tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags);
if (!tx) {
dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE);
@@ -850,11 +853,12 @@ dma_async_memcpy_buf_to_pg(struct dma_chan *chan, struct page *page,
dma_addr_t dma_dest, dma_src;
dma_cookie_t cookie;
int cpu;
+ unsigned long flags;
dma_src = dma_map_single(dev->dev, kdata, len, DMA_TO_DEVICE);
dma_dest = dma_map_page(dev->dev, page, offset, len, DMA_FROM_DEVICE);
- tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len,
- DMA_CTRL_ACK);
+ flags = DMA_CTRL_ACK | DMA_COMPL_SRC_UNMAP_SINGLE;
+ tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags);
if (!tx) {
dma_unmap_single(dev->dev, dma_src, len, DMA_TO_DEVICE);
@@ -898,12 +902,13 @@ dma_async_memcpy_pg_to_pg(struct dma_chan *chan, struct page *dest_pg,
dma_addr_t dma_dest, dma_src;
dma_cookie_t cookie;
int cpu;
+ unsigned long flags;
dma_src = dma_map_page(dev->dev, src_pg, src_off, len, DMA_TO_DEVICE);
dma_dest = dma_map_page(dev->dev, dest_pg, dest_off, len,
DMA_FROM_DEVICE);
- tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len,
- DMA_CTRL_ACK);
+ flags = DMA_CTRL_ACK;
+ tx = dev->device_prep_dma_memcpy(chan, dma_dest, dma_src, len, flags);
if (!tx) {
dma_unmap_page(dev->dev, dma_src, len, DMA_TO_DEVICE);
diff --git a/drivers/dma/dmatest.c b/drivers/dma/dmatest.c
index a27c0fb1bc1..fb7da5141e9 100644
--- a/drivers/dma/dmatest.c
+++ b/drivers/dma/dmatest.c
@@ -531,9 +531,7 @@ static int __init dmatest_init(void)
chan = dma_request_channel(mask, filter, NULL);
if (chan) {
err = dmatest_add_channel(chan);
- if (err == 0)
- continue;
- else {
+ if (err) {
dma_release_channel(chan);
break; /* add_channel failed, punt */
}
diff --git a/drivers/dma/ioat_dma.c b/drivers/dma/ioat_dma.c
index e4fc33c1c32..1955ee8d6d2 100644
--- a/drivers/dma/ioat_dma.c
+++ b/drivers/dma/ioat_dma.c
@@ -1063,22 +1063,31 @@ static void ioat_dma_cleanup_tasklet(unsigned long data)
static void
ioat_dma_unmap(struct ioat_dma_chan *ioat_chan, struct ioat_desc_sw *desc)
{
- /*
- * yes we are unmapping both _page and _single
- * alloc'd regions with unmap_page. Is this
- * *really* that bad?
- */
- if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP))
- pci_unmap_page(ioat_chan->device->pdev,
- pci_unmap_addr(desc, dst),
- pci_unmap_len(desc, len),
- PCI_DMA_FROMDEVICE);
-
- if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP))
- pci_unmap_page(ioat_chan->device->pdev,
- pci_unmap_addr(desc, src),
- pci_unmap_len(desc, len),
- PCI_DMA_TODEVICE);
+ if (!(desc->async_tx.flags & DMA_COMPL_SKIP_DEST_UNMAP)) {
+ if (desc->async_tx.flags & DMA_COMPL_DEST_UNMAP_SINGLE)
+ pci_unmap_single(ioat_chan->device->pdev,
+ pci_unmap_addr(desc, dst),
+ pci_unmap_len(desc, len),
+ PCI_DMA_FROMDEVICE);
+ else
+ pci_unmap_page(ioat_chan->device->pdev,
+ pci_unmap_addr(desc, dst),
+ pci_unmap_len(desc, len),
+ PCI_DMA_FROMDEVICE);
+ }
+
+ if (!(desc->async_tx.flags & DMA_COMPL_SKIP_SRC_UNMAP)) {
+ if (desc->async_tx.flags & DMA_COMPL_SRC_UNMAP_SINGLE)
+ pci_unmap_single(ioat_chan->device->pdev,
+ pci_unmap_addr(desc, src),
+ pci_unmap_len(desc, len),
+ PCI_DMA_TODEVICE);
+ else
+ pci_unmap_page(ioat_chan->device->pdev,
+ pci_unmap_addr(desc, src),
+ pci_unmap_len(desc, len),
+ PCI_DMA_TODEVICE);
+ }
}
/**
@@ -1363,6 +1372,7 @@ static int ioat_dma_self_test(struct ioatdma_device *device)
int err = 0;
struct completion cmp;
unsigned long tmo;
+ unsigned long flags;
src = kzalloc(sizeof(u8) * IOAT_TEST_SIZE, GFP_KERNEL);
if (!src)
@@ -1392,8 +1402,9 @@ static int ioat_dma_self_test(struct ioatdma_device *device)
DMA_TO_DEVICE);
dma_dest = dma_map_single(dma_chan->device->dev, dest, IOAT_TEST_SIZE,
DMA_FROM_DEVICE);
+ flags = DMA_COMPL_SRC_UNMAP_SINGLE | DMA_COMPL_DEST_UNMAP_SINGLE;
tx = device->common.device_prep_dma_memcpy(dma_chan, dma_dest, dma_src,
- IOAT_TEST_SIZE, 0);
+ IOAT_TEST_SIZE, flags);
if (!tx) {
dev_err(&device->pdev->dev,
"Self-test prep failed, disabling\n");
diff --git a/drivers/dma/ipu/ipu_idmac.c b/drivers/dma/ipu/ipu_idmac.c
index e202a6ce557..9a5bc1a7389 100644
--- a/drivers/dma/ipu/ipu_idmac.c
+++ b/drivers/dma/ipu/ipu_idmac.c
@@ -1272,7 +1272,8 @@ static irqreturn_t idmac_interrupt(int irq, void *dev_id)
/* Other interrupts do not interfere with this channel */
spin_lock(&ichan->lock);
if (unlikely(chan_id != IDMAC_SDC_0 && chan_id != IDMAC_SDC_1 &&
- ((curbuf >> chan_id) & 1) == ichan->active_buffer)) {
+ ((curbuf >> chan_id) & 1) == ichan->active_buffer &&
+ !list_is_last(ichan->queue.next, &ichan->queue))) {
int i = 100;
/* This doesn't help. See comment in ipu_disable_channel() */
@@ -1547,7 +1548,7 @@ static irqreturn_t ic_sof_irq(int irq, void *dev_id)
struct idmac_channel *ichan = dev_id;
printk(KERN_DEBUG "Got SOF IRQ %d on Channel %d\n",
irq, ichan->dma_chan.chan_id);
- disable_irq(irq);
+ disable_irq_nosync(irq);
return IRQ_HANDLED;
}
@@ -1556,7 +1557,7 @@ static irqreturn_t ic_eof_irq(int irq, void *dev_id)
struct idmac_channel *ichan = dev_id;
printk(KERN_DEBUG "Got EOF IRQ %d on Channel %d\n",
irq, ichan->dma_chan.chan_id);
- disable_irq(irq);
+ disable_irq_nosync(irq);
return IRQ_HANDLED;
}
diff --git a/drivers/firmware/iscsi_ibft.c b/drivers/firmware/iscsi_ibft.c
index 7b7ddc2d51c..420a96e7f2d 100644
--- a/drivers/firmware/iscsi_ibft.c
+++ b/drivers/firmware/iscsi_ibft.c
@@ -754,11 +754,11 @@ static int __init ibft_check_nic_for(struct ibft_nic *nic, int entry)
rc = 1;
break;
case ibft_eth_ip_addr:
- if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp)))
+ if (memcmp(nic->ip_addr, nulls, sizeof(nic->ip_addr)))
rc = 1;
break;
case ibft_eth_subnet_mask:
- if (!memcmp(nic->dhcp, nulls, sizeof(nic->dhcp)))
+ if (nic->subnet_mask_prefix)
rc = 1;
break;
case ibft_eth_origin:
diff --git a/drivers/gpu/drm/Kconfig b/drivers/gpu/drm/Kconfig
index 3a22eb9be37..4cd35d8fd79 100644
--- a/drivers/gpu/drm/Kconfig
+++ b/drivers/gpu/drm/Kconfig
@@ -71,6 +71,7 @@ config DRM_I915
select FB_CFB_COPYAREA
select FB_CFB_IMAGEBLIT
select FB
+ select FRAMEBUFFER_CONSOLE if !EMBEDDED
tristate "i915 driver"
help
Choose this option if you have a system that has Intel 830M, 845G,
@@ -83,6 +84,12 @@ config DRM_I915
config DRM_I915_KMS
bool "Enable modesetting on intel by default"
depends on DRM_I915
+ # i915 KMS depends on ACPI_VIDEO when ACPI is enabled
+ # but for select to work, need to select ACPI_VIDEO's dependencies, ick
+ select VIDEO_OUTPUT_CONTROL if ACPI
+ select BACKLIGHT_CLASS_DEVICE if ACPI
+ select INPUT if ACPI
+ select ACPI_VIDEO if ACPI
help
Choose this option if you want kernel modesetting enabled by default,
and you have a new enough userspace to support this. Running old
diff --git a/drivers/gpu/drm/drm_bufs.c b/drivers/gpu/drm/drm_bufs.c
index 6d80d17f1e9..0411d912d82 100644
--- a/drivers/gpu/drm/drm_bufs.c
+++ b/drivers/gpu/drm/drm_bufs.c
@@ -170,6 +170,14 @@ static int drm_addmap_core(struct drm_device * dev, resource_size_t offset,
}
DRM_DEBUG("offset = 0x%08llx, size = 0x%08lx, type = %d\n",
(unsigned long long)map->offset, map->size, map->type);
+
+ /* page-align _DRM_SHM maps. They are allocated here so there is no security
+ * hole created by that and it works around various broken drivers that use
+ * a non-aligned quantity to map the SAREA. --BenH
+ */
+ if (map->type == _DRM_SHM)
+ map->size = PAGE_ALIGN(map->size);
+
if ((map->offset & (~(resource_size_t)PAGE_MASK)) || (map->size & (~PAGE_MASK))) {
drm_free(map, sizeof(*map), DRM_MEM_MAPS);
return -EINVAL;
diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c
index a04639dc633..45890447fee 100644
--- a/drivers/gpu/drm/drm_crtc_helper.c
+++ b/drivers/gpu/drm/drm_crtc_helper.c
@@ -561,7 +561,6 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
int saved_x, saved_y;
struct drm_encoder *encoder;
bool ret = true;
- bool depth_changed, bpp_changed;
adjusted_mode = drm_mode_duplicate(dev, mode);
@@ -570,15 +569,6 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
if (!crtc->enabled)
return true;
- if (old_fb && crtc->fb) {
- depth_changed = (old_fb->depth != crtc->fb->depth);
- bpp_changed = (old_fb->bits_per_pixel !=
- crtc->fb->bits_per_pixel);
- } else {
- depth_changed = true;
- bpp_changed = true;
- }
-
saved_mode = crtc->mode;
saved_x = crtc->x;
saved_y = crtc->y;
@@ -590,15 +580,6 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc,
crtc->x = x;
crtc->y = y;
- if (drm_mode_equal(&saved_mode, &crtc->mode)) {
- if (saved_x != crtc->x || saved_y != crtc->y ||
- depth_changed || bpp_changed) {
- ret = !crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y,
- old_fb);
- goto done;
- }
- }
-
/* Pass our mode to the connectors and the CRTC to give them a chance to
* adjust it according to limitations or connector properties, and also
* a chance to reject the mode entirely.
diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c
index c4ada8b6295..019b7c57823 100644
--- a/drivers/gpu/drm/drm_drv.c
+++ b/drivers/gpu/drm/drm_drv.c
@@ -456,7 +456,8 @@ int drm_ioctl(struct inode *inode, struct file *filp,
retcode = -EINVAL;
} else if (((ioctl->flags & DRM_ROOT_ONLY) && !capable(CAP_SYS_ADMIN)) ||
((ioctl->flags & DRM_AUTH) && !file_priv->authenticated) ||
- ((ioctl->flags & DRM_MASTER) && !file_priv->is_master)) {
+ ((ioctl->flags & DRM_MASTER) && !file_priv->is_master) ||
+ (!(ioctl->flags & DRM_CONTROL_ALLOW) && (file_priv->minor->type == DRM_MINOR_CONTROL))) {
retcode = -EACCES;
} else {
if (cmd & (IOC_IN | IOC_OUT)) {
@@ -480,7 +481,7 @@ int drm_ioctl(struct inode *inode, struct file *filp,
}
retcode = func(dev, kdata, file_priv);
- if ((retcode == 0) && (cmd & IOC_OUT)) {
+ if (cmd & IOC_OUT) {
if (copy_to_user((void __user *)arg, kdata,
_IOC_SIZE(cmd)) != 0)
retcode = -EFAULT;
diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c
index ef878615c49..b9631e3a1ea 100644
--- a/drivers/gpu/drm/drm_stub.c
+++ b/drivers/gpu/drm/drm_stub.c
@@ -402,14 +402,14 @@ int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent,
if (dev->driver->load) {
ret = dev->driver->load(dev, ent->driver_data);
if (ret)
- goto err_g3;
+ goto err_g4;
}
/* setup the grouping for the legacy output */
if (drm_core_check_feature(dev, DRIVER_MODESET)) {
ret = drm_mode_group_init_legacy_group(dev, &dev->primary->mode_group);
if (ret)
- goto err_g3;
+ goto err_g4;
}
list_add_tail(&dev->driver_item, &driver->device_list);
@@ -420,8 +420,11 @@ int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent,
return 0;
-err_g3:
+err_g4:
drm_put_minor(&dev->primary);
+err_g3:
+ if (drm_core_check_feature(dev, DRIVER_MODESET))
+ drm_put_minor(&dev->control);
err_g2:
pci_disable_device(pdev);
err_g1:
@@ -502,11 +505,11 @@ void drm_put_dev(struct drm_device *dev)
dev->agp = NULL;
}
- drm_ht_remove(&dev->map_hash);
- drm_ctxbitmap_cleanup(dev);
-
list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head)
drm_rmmap(dev, r_list->map);
+ drm_ht_remove(&dev->map_hash);
+
+ drm_ctxbitmap_cleanup(dev);
if (drm_core_check_feature(dev, DRIVER_MODESET))
drm_put_minor(&dev->control);
diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c
index 022876ae34f..8f9372921f8 100644
--- a/drivers/gpu/drm/drm_sysfs.c
+++ b/drivers/gpu/drm/drm_sysfs.c
@@ -489,9 +489,7 @@ int drm_sysfs_device_add(struct drm_minor *minor)
return 0;
- device_unregister(&minor->kdev);
err_out:
-
return err;
}
diff --git a/drivers/gpu/drm/i915/i915_dma.c b/drivers/gpu/drm/i915/i915_dma.c
index 051134c56ae..53d54455262 100644
--- a/drivers/gpu/drm/i915/i915_dma.c
+++ b/drivers/gpu/drm/i915/i915_dma.c
@@ -1011,8 +1011,16 @@ static int i915_load_modeset_init(struct drm_device *dev)
/* Basic memrange allocator for stolen space (aka vram) */
drm_mm_init(&dev_priv->vram, 0, prealloc_size);
- /* Let GEM Manage from end of prealloc space to end of aperture */
- i915_gem_do_init(dev, prealloc_size, agp_size);
+ /* Let GEM Manage from end of prealloc space to end of aperture.
+ *
+ * However, leave one page at the end still bound to the scratch page.
+ * There are a number of places where the hardware apparently
+ * prefetches past the end of the object, and we've seen multiple
+ * hangs with the GPU head pointer stuck in a batchbuffer bound
+ * at the last page of the aperture. One page should be enough to
+ * keep any prefetching inside of the aperture.
+ */
+ i915_gem_do_init(dev, prealloc_size, agp_size - 4096);
ret = i915_gem_init_ringbuffer(dev);
if (ret)
@@ -1350,6 +1358,7 @@ struct drm_ioctl_desc i915_ioctls[] = {
DRM_IOCTL_DEF(DRM_I915_GEM_SET_TILING, i915_gem_set_tiling, 0),
DRM_IOCTL_DEF(DRM_I915_GEM_GET_TILING, i915_gem_get_tiling, 0),
DRM_IOCTL_DEF(DRM_I915_GEM_GET_APERTURE, i915_gem_get_aperture_ioctl, 0),
+ DRM_IOCTL_DEF(DRM_I915_GET_PIPE_FROM_CRTC_ID, intel_get_pipe_from_crtc_id, 0),
};
int i915_max_ioctl = DRM_ARRAY_SIZE(i915_ioctls);
diff --git a/drivers/gpu/drm/i915/i915_drv.h b/drivers/gpu/drm/i915/i915_drv.h
index 25065923b8a..9b149fe824c 100644
--- a/drivers/gpu/drm/i915/i915_drv.h
+++ b/drivers/gpu/drm/i915/i915_drv.h
@@ -283,6 +283,7 @@ typedef struct drm_i915_private {
u8 saveAR[21];
u8 saveDACMASK;
u8 saveCR[37];
+ uint64_t saveFENCE[16];
struct {
struct drm_mm gtt_space;
@@ -705,13 +706,8 @@ extern void intel_modeset_cleanup(struct drm_device *dev);
#define I915_WRITE16(reg, val) writel(val, dev_priv->regs + (reg))
#define I915_READ8(reg) readb(dev_priv->regs + (reg))
#define I915_WRITE8(reg, val) writeb(val, dev_priv->regs + (reg))
-#ifdef writeq
#define I915_WRITE64(reg, val) writeq(val, dev_priv->regs + (reg))
-#else
-#define I915_WRITE64(reg, val) (writel(val, dev_priv->regs + (reg)), \
- writel(upper_32_bits(val), dev_priv->regs + \
- (reg) + 4))
-#endif
+#define I915_READ64(reg) readq(dev_priv->regs + (reg))
#define POSTING_READ(reg) (void)I915_READ(reg)
#define I915_VERBOSE 0
@@ -790,7 +786,8 @@ extern int i915_wait_ring(struct drm_device * dev, int n, const char *caller);
(dev)->pci_device == 0x2E22 || \
(dev)->pci_device == 0x2E32)
-#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02)
+#define IS_I965GM(dev) ((dev)->pci_device == 0x2A02 || \
+ (dev)->pci_device == 0x2A12)
#define IS_GM45(dev) ((dev)->pci_device == 0x2A42)
diff --git a/drivers/gpu/drm/i915/i915_gem.c b/drivers/gpu/drm/i915/i915_gem.c
index ee896d91c5b..b189b49c760 100644
--- a/drivers/gpu/drm/i915/i915_gem.c
+++ b/drivers/gpu/drm/i915/i915_gem.c
@@ -1691,11 +1691,20 @@ static int
i915_wait_request(struct drm_device *dev, uint32_t seqno)
{
drm_i915_private_t *dev_priv = dev->dev_private;
+ u32 ier;
int ret = 0;
BUG_ON(seqno == 0);
if (!i915_seqno_passed(i915_get_gem_seqno(dev), seqno)) {
+ ier = I915_READ(IER);
+ if (!ier) {
+ DRM_ERROR("something (likely vbetool) disabled "
+ "interrupts, re-enabling\n");
+ i915_driver_irq_preinstall(dev);
+ i915_driver_irq_postinstall(dev);
+ }
+
dev_priv->mm.waiting_gem_seqno = seqno;
i915_user_irq_get(dev);
ret = wait_event_interruptible(dev_priv->irq_queue,
diff --git a/drivers/gpu/drm/i915/i915_reg.h b/drivers/gpu/drm/i915/i915_reg.h
index 52119473226..15da44cf21b 100644
--- a/drivers/gpu/drm/i915/i915_reg.h
+++ b/drivers/gpu/drm/i915/i915_reg.h
@@ -526,6 +526,7 @@
#define DPLLA_INPUT_BUFFER_ENABLE (1 << 0)
#define D_STATE 0x6104
#define CG_2D_DIS 0x6200
+#define DPCUNIT_CLOCK_GATE_DISABLE (1 << 24)
#define CG_3D_DIS 0x6204
/*
diff --git a/drivers/gpu/drm/i915/i915_suspend.c b/drivers/gpu/drm/i915/i915_suspend.c
index d669cc2b42c..ce8a21344a7 100644
--- a/drivers/gpu/drm/i915/i915_suspend.c
+++ b/drivers/gpu/drm/i915/i915_suspend.c
@@ -349,6 +349,18 @@ int i915_save_state(struct drm_device *dev)
for (i = 0; i < 3; i++)
dev_priv->saveSWF2[i] = I915_READ(SWF30 + (i << 2));
+ /* Fences */
+ if (IS_I965G(dev)) {
+ for (i = 0; i < 16; i++)
+ dev_priv->saveFENCE[i] = I915_READ64(FENCE_REG_965_0 + (i * 8));
+ } else {
+ for (i = 0; i < 8; i++)
+ dev_priv->saveFENCE[i] = I915_READ(FENCE_REG_830_0 + (i * 4));
+
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+ for (i = 0; i < 8; i++)
+ dev_priv->saveFENCE[i+8] = I915_READ(FENCE_REG_945_8 + (i * 4));
+ }
i915_save_vga(dev);
return 0;
@@ -371,6 +383,18 @@ int i915_restore_state(struct drm_device *dev)
/* Display arbitration */
I915_WRITE(DSPARB, dev_priv->saveDSPARB);
+ /* Fences */
+ if (IS_I965G(dev)) {
+ for (i = 0; i < 16; i++)
+ I915_WRITE64(FENCE_REG_965_0 + (i * 8), dev_priv->saveFENCE[i]);
+ } else {
+ for (i = 0; i < 8; i++)
+ I915_WRITE(FENCE_REG_830_0 + (i * 4), dev_priv->saveFENCE[i]);
+ if (IS_I945G(dev) || IS_I945GM(dev) || IS_G33(dev))
+ for (i = 0; i < 8; i++)
+ I915_WRITE(FENCE_REG_945_8 + (i * 4), dev_priv->saveFENCE[i+8]);
+ }
+
/* Pipe & plane A info */
/* Prime the clock */
if (dev_priv->saveDPLL_A & DPLL_VCO_ENABLE) {
diff --git a/drivers/gpu/drm/i915/intel_crt.c b/drivers/gpu/drm/i915/intel_crt.c
index 9bdd959260a..19148c3df63 100644
--- a/drivers/gpu/drm/i915/intel_crt.c
+++ b/drivers/gpu/drm/i915/intel_crt.c
@@ -161,7 +161,7 @@ static bool intel_crt_detect_hotplug(struct drm_connector *connector)
hotplug_en &= CRT_FORCE_HOTPLUG_MASK;
hotplug_en |= CRT_HOTPLUG_FORCE_DETECT;
- if (IS_GM45(dev))
+ if (IS_G4X(dev))
hotplug_en |= CRT_HOTPLUG_ACTIVATION_PERIOD_64;
hotplug_en |= CRT_HOTPLUG_VOLTAGE_COMPARE_50;
diff --git a/drivers/gpu/drm/i915/intel_display.c b/drivers/gpu/drm/i915/intel_display.c
index bdcda36953b..3387cf32f38 100644
--- a/drivers/gpu/drm/i915/intel_display.c
+++ b/drivers/gpu/drm/i915/intel_display.c
@@ -1804,6 +1804,37 @@ static void intel_crtc_init(struct drm_device *dev, int pipe)
}
}
+int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
+ struct drm_file *file_priv)
+{
+ drm_i915_private_t *dev_priv = dev->dev_private;
+ struct drm_i915_get_pipe_from_crtc_id *pipe_from_crtc_id = data;
+ struct drm_crtc *crtc = NULL;
+ int pipe = -1;
+
+ if (!dev_priv) {
+ DRM_ERROR("called with no initialization\n");
+ return -EINVAL;
+ }
+
+ list_for_each_entry(crtc, &dev->mode_config.crtc_list, head) {
+ struct intel_crtc *intel_crtc = to_intel_crtc(crtc);
+ if (crtc->base.id == pipe_from_crtc_id->crtc_id) {
+ pipe = intel_crtc->pipe;
+ break;
+ }
+ }
+
+ if (pipe == -1) {
+ DRM_ERROR("no such CRTC id\n");
+ return -EINVAL;
+ }
+
+ pipe_from_crtc_id->pipe = pipe;
+
+ return 0;
+}
+
struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe)
{
struct drm_crtc *crtc = NULL;
diff --git a/drivers/gpu/drm/i915/intel_drv.h b/drivers/gpu/drm/i915/intel_drv.h
index 957daef8edf..cd4b9c5f715 100644
--- a/drivers/gpu/drm/i915/intel_drv.h
+++ b/drivers/gpu/drm/i915/intel_drv.h
@@ -109,7 +109,7 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
void intel_i2c_destroy(struct intel_i2c_chan *chan);
int intel_ddc_get_modes(struct intel_output *intel_output);
extern bool intel_ddc_probe(struct intel_output *intel_output);
-
+void intel_i2c_quirk_set(struct drm_device *dev, bool enable);
extern void intel_crt_init(struct drm_device *dev);
extern void intel_hdmi_init(struct drm_device *dev, int sdvox_reg);
extern bool intel_sdvo_init(struct drm_device *dev, int output_device);
@@ -125,6 +125,8 @@ extern struct drm_encoder *intel_best_encoder(struct drm_connector *connector);
extern struct drm_display_mode *intel_crtc_mode_get(struct drm_device *dev,
struct drm_crtc *crtc);
+int intel_get_pipe_from_crtc_id(struct drm_device *dev, void *data,
+ struct drm_file *file_priv);
extern void intel_wait_for_vblank(struct drm_device *dev);
extern struct drm_crtc *intel_get_crtc_from_pipe(struct drm_device *dev, int pipe);
extern struct drm_crtc *intel_get_load_detect_pipe(struct intel_output *intel_output,
diff --git a/drivers/gpu/drm/i915/intel_fb.c b/drivers/gpu/drm/i915/intel_fb.c
index 3e094beecb9..e4652dcdd9b 100644
--- a/drivers/gpu/drm/i915/intel_fb.c
+++ b/drivers/gpu/drm/i915/intel_fb.c
@@ -864,7 +864,7 @@ static void intelfb_sysrq(int dummy1, struct tty_struct *dummy3)
static struct sysrq_key_op sysrq_intelfb_restore_op = {
.handler = intelfb_sysrq,
- .help_msg = "force-fb(G)",
+ .help_msg = "force-fb(V)",
.action_msg = "Restore framebuffer console",
};
@@ -898,7 +898,7 @@ int intelfb_probe(struct drm_device *dev)
ret = intelfb_single_fb_probe(dev);
}
- register_sysrq_key('g', &sysrq_intelfb_restore_op);
+ register_sysrq_key('v', &sysrq_intelfb_restore_op);
return ret;
}
diff --git a/drivers/gpu/drm/i915/intel_hdmi.c b/drivers/gpu/drm/i915/intel_hdmi.c
index 55037422538..d0983bb93a1 100644
--- a/drivers/gpu/drm/i915/intel_hdmi.c
+++ b/drivers/gpu/drm/i915/intel_hdmi.c
@@ -155,11 +155,18 @@ intel_hdmi_detect(struct drm_connector *connector)
temp = I915_READ(PORT_HOTPLUG_EN);
- I915_WRITE(PORT_HOTPLUG_EN,
- temp |
- HDMIB_HOTPLUG_INT_EN |
- HDMIC_HOTPLUG_INT_EN |
- HDMID_HOTPLUG_INT_EN);
+ switch (hdmi_priv->sdvox_reg) {
+ case SDVOB:
+ temp |= HDMIB_HOTPLUG_INT_EN;
+ break;
+ case SDVOC:
+ temp |= HDMIC_HOTPLUG_INT_EN;
+ break;
+ default:
+ return connector_status_unknown;
+ }
+
+ I915_WRITE(PORT_HOTPLUG_EN, temp);
POSTING_READ(PORT_HOTPLUG_EN);
diff --git a/drivers/gpu/drm/i915/intel_i2c.c b/drivers/gpu/drm/i915/intel_i2c.c
index 5ee9d4c2575..f7061f68d05 100644
--- a/drivers/gpu/drm/i915/intel_i2c.c
+++ b/drivers/gpu/drm/i915/intel_i2c.c
@@ -34,6 +34,21 @@
#include "i915_drm.h"
#include "i915_drv.h"
+void intel_i2c_quirk_set(struct drm_device *dev, bool enable)
+{
+ struct drm_i915_private *dev_priv = dev->dev_private;
+
+ /* When using bit bashing for I2C, this bit needs to be set to 1 */
+ if (!IS_IGD(dev))
+ return;
+ if (enable)
+ I915_WRITE(CG_2D_DIS,
+ I915_READ(CG_2D_DIS) | DPCUNIT_CLOCK_GATE_DISABLE);
+ else
+ I915_WRITE(CG_2D_DIS,
+ I915_READ(CG_2D_DIS) & (~DPCUNIT_CLOCK_GATE_DISABLE));
+}
+
/*
* Intel GPIO access functions
*/
@@ -153,8 +168,10 @@ struct intel_i2c_chan *intel_i2c_create(struct drm_device *dev, const u32 reg,
goto out_free;
/* JJJ: raise SCL and SDA? */
+ intel_i2c_quirk_set(dev, true);
set_data(chan, 1);
set_clock(chan, 1);
+ intel_i2c_quirk_set(dev, false);
udelay(20);
return chan;
diff --git a/drivers/gpu/drm/i915/intel_lvds.c b/drivers/gpu/drm/i915/intel_lvds.c
index 6619f26e46a..439a8651499 100644
--- a/drivers/gpu/drm/i915/intel_lvds.c
+++ b/drivers/gpu/drm/i915/intel_lvds.c
@@ -384,7 +384,51 @@ static const struct drm_encoder_funcs intel_lvds_enc_funcs = {
.destroy = intel_lvds_enc_destroy,
};
+static int __init intel_no_lvds_dmi_callback(const struct dmi_system_id *id)
+{
+ DRM_DEBUG("Skipping LVDS initialization for %s\n", id->ident);
+ return 1;
+}
+/* These systems claim to have LVDS, but really don't */
+static const struct dmi_system_id __initdata intel_no_lvds[] = {
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "Apple Mac Mini (Core series)",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Macmini1,1"),
+ },
+ },
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "Apple Mac Mini (Core 2 series)",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Apple Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Macmini2,1"),
+ },
+ },
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "MSI IM-945GSE-A",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "MSI"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "A9830IMS"),
+ },
+ },
+ {
+ .callback = intel_no_lvds_dmi_callback,
+ .ident = "Dell Studio Hybrid",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "Dell Inc."),
+ DMI_MATCH(DMI_PRODUCT_NAME, "Studio Hybrid 140g"),
+ },
+ },
+
+ /* FIXME: add a check for the Aopen Mini PC */
+
+ { } /* terminating entry */
+};
/**
* intel_lvds_init - setup LVDS connectors on this device
@@ -404,15 +448,9 @@ void intel_lvds_init(struct drm_device *dev)
u32 lvds;
int pipe;
- /* Blacklist machines that we know falsely report LVDS. */
- /* FIXME: add a check for the Aopen Mini PC */
-
- /* Apple Mac Mini Core Duo and Mac Mini Core 2 Duo */
- if(dmi_match(DMI_PRODUCT_NAME, "Macmini1,1") ||
- dmi_match(DMI_PRODUCT_NAME, "Macmini2,1")) {
- DRM_DEBUG("Skipping LVDS initialization for Apple Mac Mini\n");
+ /* Skip init on machines we know falsely report LVDS */
+ if (dmi_check_system(intel_no_lvds))
return;
- }
intel_output = kzalloc(sizeof(struct intel_output), GFP_KERNEL);
if (!intel_output) {
diff --git a/drivers/gpu/drm/i915/intel_modes.c b/drivers/gpu/drm/i915/intel_modes.c
index 07d7ec97616..e0910fefce8 100644
--- a/drivers/gpu/drm/i915/intel_modes.c
+++ b/drivers/gpu/drm/i915/intel_modes.c
@@ -27,6 +27,7 @@
#include <linux/fb.h>
#include "drmP.h"
#include "intel_drv.h"
+#include "i915_drv.h"
/**
* intel_ddc_probe
@@ -52,7 +53,10 @@ bool intel_ddc_probe(struct intel_output *intel_output)
}
};
+ intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
ret = i2c_transfer(&intel_output->ddc_bus->adapter, msgs, 2);
+ intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
+
if (ret == 2)
return true;
@@ -70,8 +74,10 @@ int intel_ddc_get_modes(struct intel_output *intel_output)
struct edid *edid;
int ret = 0;
+ intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, true);
edid = drm_get_edid(&intel_output->base,
&intel_output->ddc_bus->adapter);
+ intel_i2c_quirk_set(intel_output->ddc_bus->drm_dev, false);
if (edid) {
drm_mode_connector_update_edid_property(&intel_output->base,
edid);
diff --git a/drivers/gpu/drm/r128/r128_cce.c b/drivers/gpu/drm/r128/r128_cce.c
index 32de4cedc36..077c0455a6b 100644
--- a/drivers/gpu/drm/r128/r128_cce.c
+++ b/drivers/gpu/drm/r128/r128_cce.c
@@ -511,9 +511,9 @@ static int r128_do_init_cce(struct drm_device * dev, drm_r128_init_t * init)
#if __OS_HAS_AGP
if (!dev_priv->is_pci) {
- drm_core_ioremap(dev_priv->cce_ring, dev);
- drm_core_ioremap(dev_priv->ring_rptr, dev);
- drm_core_ioremap(dev->agp_buffer_map, dev);
+ drm_core_ioremap_wc(dev_priv->cce_ring, dev);
+ drm_core_ioremap_wc(dev_priv->ring_rptr, dev);
+ drm_core_ioremap_wc(dev->agp_buffer_map, dev);
if (!dev_priv->cce_ring->handle ||
!dev_priv->ring_rptr->handle ||
!dev->agp_buffer_map->handle) {
diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h
index ed4d27e6ee6..8071d965f14 100644
--- a/drivers/gpu/drm/radeon/radeon_drv.h
+++ b/drivers/gpu/drm/radeon/radeon_drv.h
@@ -99,9 +99,10 @@
* 1.27- Add support for IGP GART
* 1.28- Add support for VBL on CRTC2
* 1.29- R500 3D cmd buffer support
+ * 1.30- Add support for occlusion queries
*/
#define DRIVER_MAJOR 1
-#define DRIVER_MINOR 29
+#define DRIVER_MINOR 30
#define DRIVER_PATCHLEVEL 0
/*
diff --git a/drivers/hid/hid-apple.c b/drivers/hid/hid-apple.c
index 7359d9d88e4..acbce5745b0 100644
--- a/drivers/hid/hid-apple.c
+++ b/drivers/hid/hid-apple.c
@@ -151,7 +151,7 @@ static int hidinput_apple_event(struct hid_device *hid, struct input_dev *input,
if (fnmode) {
int do_translate;
- trans = apple_find_translation((hid->product < 0x220 ||
+ trans = apple_find_translation((hid->product < 0x21d ||
hid->product >= 0x300) ?
powerbook_fn_keys : apple_fn_keys,
usage->code);
diff --git a/drivers/hid/hid-core.c b/drivers/hid/hid-core.c
index 5746a5903bc..8551693d645 100644
--- a/drivers/hid/hid-core.c
+++ b/drivers/hid/hid-core.c
@@ -1293,6 +1293,7 @@ static const struct hid_device_id hid_blacklist[] = {
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_FORCE3D_PRO) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2) },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL) },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_SIDEWINDER_GV) },
{ HID_USB_DEVICE(USB_VENDOR_ID_MICROSOFT, USB_DEVICE_ID_MS_NE4K) },
@@ -1824,6 +1825,9 @@ int hid_check_keys_pressed(struct hid_device *hid)
struct hid_input *hidinput;
int i;
+ if (!(hid->claimed & HID_CLAIMED_INPUT))
+ return 0;
+
list_for_each_entry(hidinput, &hid->inputs, list) {
for (i = 0; i < BITS_TO_LONGS(KEY_MAX); i++)
if (hidinput->input->key[i])
diff --git a/drivers/hid/hid-ids.h b/drivers/hid/hid-ids.h
index bdeda4c7cc1..4d5ee2bbc62 100644
--- a/drivers/hid/hid-ids.h
+++ b/drivers/hid/hid-ids.h
@@ -113,6 +113,11 @@
#define USB_VENDOR_ID_BERKSHIRE 0x0c98
#define USB_DEVICE_ID_BERKSHIRE_PCWD 0x1140
+#define USB_VENDOR_ID_CH 0x068e
+#define USB_DEVICE_ID_CH_PRO_PEDALS 0x00f2
+#define USB_DEVICE_ID_CH_COMBATSTICK 0x00f4
+#define USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE 0x00ff
+
#define USB_VENDOR_ID_CHERRY 0x046a
#define USB_DEVICE_ID_CHERRY_CYMOTION 0x0023
@@ -292,6 +297,7 @@
#define USB_DEVICE_ID_LOGITECH_FORCE3D_PRO 0xc286
#define USB_DEVICE_ID_LOGITECH_WHEEL 0xc294
#define USB_DEVICE_ID_LOGITECH_MOMO_WHEEL 0xc295
+#define USB_DEVICE_ID_LOGITECH_G25_WHEEL 0xc299
#define USB_DEVICE_ID_LOGITECH_ELITE_KBD 0xc30a
#define USB_DEVICE_ID_S510_RECEIVER 0xc50c
#define USB_DEVICE_ID_S510_RECEIVER_2 0xc517
diff --git a/drivers/hid/hid-lg.c b/drivers/hid/hid-lg.c
index 7b80cb69498..7afbaa0efd1 100644
--- a/drivers/hid/hid-lg.c
+++ b/drivers/hid/hid-lg.c
@@ -297,6 +297,8 @@ static const struct hid_device_id lg_devices[] = {
.driver_data = LG_FF },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_MOMO_WHEEL2),
.driver_data = LG_FF },
+ { HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_G25_WHEEL),
+ .driver_data = LG_FF },
{ HID_USB_DEVICE(USB_VENDOR_ID_LOGITECH, USB_DEVICE_ID_LOGITECH_RUMBLEPAD2),
.driver_data = LG_FF2 },
{ }
diff --git a/drivers/hid/hidraw.c b/drivers/hid/hidraw.c
index e263d473117..00ccf4b1985 100644
--- a/drivers/hid/hidraw.c
+++ b/drivers/hid/hidraw.c
@@ -285,8 +285,10 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd,
if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWNAME(0))) {
int len;
- if (!hid->name)
- return 0;
+ if (!hid->name) {
+ ret = 0;
+ break;
+ }
len = strlen(hid->name) + 1;
if (len > _IOC_SIZE(cmd))
len = _IOC_SIZE(cmd);
@@ -297,8 +299,10 @@ static long hidraw_ioctl(struct file *file, unsigned int cmd,
if (_IOC_NR(cmd) == _IOC_NR(HIDIOCGRAWPHYS(0))) {
int len;
- if (!hid->phys)
- return 0;
+ if (!hid->phys) {
+ ret = 0;
+ break;
+ }
len = strlen(hid->phys) + 1;
if (len > _IOC_SIZE(cmd))
len = _IOC_SIZE(cmd);
diff --git a/drivers/hid/usbhid/hid-core.c b/drivers/hid/usbhid/hid-core.c
index 4306cb1b8ce..ac8049b5f1e 100644
--- a/drivers/hid/usbhid/hid-core.c
+++ b/drivers/hid/usbhid/hid-core.c
@@ -662,8 +662,8 @@ void usbhid_close(struct hid_device *hid)
spin_lock_irq(&usbhid->lock);
if (!--hid->open) {
spin_unlock_irq(&usbhid->lock);
+ hid_cancel_delayed_stuff(usbhid);
usb_kill_urb(usbhid->urbin);
- flush_scheduled_work();
usbhid->intf->needs_remote_wakeup = 0;
} else {
spin_unlock_irq(&usbhid->lock);
@@ -898,7 +898,7 @@ static int usbhid_parse(struct hid_device *hid)
goto err;
}
- hid->quirks = quirks;
+ hid->quirks |= quirks;
return 0;
err:
diff --git a/drivers/hid/usbhid/hid-quirks.c b/drivers/hid/usbhid/hid-quirks.c
index 4391717d251..d8f7423f363 100644
--- a/drivers/hid/usbhid/hid-quirks.c
+++ b/drivers/hid/usbhid/hid-quirks.c
@@ -50,6 +50,9 @@ static const struct hid_blacklist {
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_2PORTKVM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVM, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ATEN, USB_DEVICE_ID_ATEN_4PORTKVMC, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_COMBATSTICK, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_FLIGHT_SIM_YOKE, HID_QUIRK_NOGET },
+ { USB_VENDOR_ID_CH, USB_DEVICE_ID_CH_PRO_PEDALS, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_DMI, USB_DEVICE_ID_DMI_ENC, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_ELO, USB_DEVICE_ID_ELO_TS2700, HID_QUIRK_NOGET },
{ USB_VENDOR_ID_SUN, USB_DEVICE_ID_RARITAN_KVM_DONGLE, HID_QUIRK_NOGET },
diff --git a/drivers/hwmon/asus_atk0110.c b/drivers/hwmon/asus_atk0110.c
index 0897edef257..bff0103610c 100644
--- a/drivers/hwmon/asus_atk0110.c
+++ b/drivers/hwmon/asus_atk0110.c
@@ -348,6 +348,7 @@ static int validate_hwmon_pack(struct atk_data *data, union acpi_object *obj)
return 0;
}
+#ifdef DEBUG
static char const *atk_sensor_type(union acpi_object *flags)
{
u64 type = flags->integer.value & ATK_TYPE_MASK;
@@ -370,6 +371,7 @@ static char const *atk_sensor_type(union acpi_object *flags)
return what;
}
+#endif
static void atk_print_sensor(struct atk_data *data, union acpi_object *obj)
{
diff --git a/drivers/hwmon/w83781d.c b/drivers/hwmon/w83781d.c
index dbfb30c588d..0bdab959b73 100644
--- a/drivers/hwmon/w83781d.c
+++ b/drivers/hwmon/w83781d.c
@@ -1462,7 +1462,8 @@ static struct w83781d_data *w83781d_update_device(struct device *dev)
data->pwm[i] =
w83781d_read_value(data,
W83781D_REG_PWM[i]);
- if ((data->type != w83782d || !client->driver)
+ /* Only W83782D on SMBus has PWM3 and PWM4 */
+ if ((data->type != w83782d || !client)
&& i == 1)
break;
}
diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c
index d420cc5f563..e25e13980af 100644
--- a/drivers/i2c/algos/i2c-algo-bit.c
+++ b/drivers/i2c/algos/i2c-algo-bit.c
@@ -104,7 +104,7 @@ static int sclhi(struct i2c_algo_bit_data *adap)
* chips may hold it low ("clock stretching") while they
* are processing data internally.
*/
- if (time_after_eq(jiffies, start + adap->timeout))
+ if (time_after(jiffies, start + adap->timeout))
return -ETIMEDOUT;
cond_resched();
}
diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c
index 6318f7ddc1d..78d42aae008 100644
--- a/drivers/i2c/algos/i2c-algo-pca.c
+++ b/drivers/i2c/algos/i2c-algo-pca.c
@@ -287,10 +287,21 @@ static int pca_xfer(struct i2c_adapter *i2c_adap,
case 0x30: /* Data byte in I2CDAT has been transmitted; NOT ACK has been received */
DEB2("NOT ACK received after data byte\n");
+ pca_stop(adap);
goto out;
case 0x38: /* Arbitration lost during SLA+W, SLA+R or data bytes */
DEB2("Arbitration lost\n");
+ /*
+ * The PCA9564 data sheet (2006-09-01) says "A
+ * START condition will be transmitted when the
+ * bus becomes free (STOP or SCL and SDA high)"
+ * when the STA bit is set (p. 11).
+ *
+ * In case this won't work, try pca_reset()
+ * instead.
+ */
+ pca_start(adap);
goto out;
case 0x58: /* Data byte has been received; NOT ACK has been returned */
diff --git a/drivers/i2c/busses/Kconfig b/drivers/i2c/busses/Kconfig
index a48c8aee021..f1c6ca7e285 100644
--- a/drivers/i2c/busses/Kconfig
+++ b/drivers/i2c/busses/Kconfig
@@ -467,7 +467,7 @@ config I2C_PXA_SLAVE
config I2C_S3C2410
tristate "S3C2410 I2C Driver"
- depends on ARCH_S3C2410
+ depends on ARCH_S3C2410 || ARCH_S3C64XX
help
Say Y here to include support for I2C controller in the
Samsung S3C2410 based System-on-Chip devices.
diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c
index 981e080b32a..d108450df06 100644
--- a/drivers/i2c/busses/i2c-ali1535.c
+++ b/drivers/i2c/busses/i2c-ali1535.c
@@ -284,7 +284,7 @@ static int ali1535_transaction(struct i2c_adapter *adap)
&& (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
result = -ETIMEDOUT;
dev_err(&adap->dev, "SMBus Timeout!\n");
}
diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c
index 39066dee46e..d627fceb790 100644
--- a/drivers/i2c/busses/i2c-ali15x3.c
+++ b/drivers/i2c/busses/i2c-ali15x3.c
@@ -306,7 +306,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap)
&& (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
result = -ETIMEDOUT;
dev_err(&adap->dev, "SMBus Timeout!\n");
}
diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c
index 220f4a1eee1..f7d6fe9c49b 100644
--- a/drivers/i2c/busses/i2c-amd756.c
+++ b/drivers/i2c/busses/i2c-amd756.c
@@ -126,7 +126,7 @@ static int amd756_transaction(struct i2c_adapter *adap)
} while ((temp & (GS_HST_STS | GS_SMB_STS)) &&
(timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "Busy wait timeout (%04x)\n", temp);
goto abort;
}
@@ -143,7 +143,7 @@ static int amd756_transaction(struct i2c_adapter *adap)
} while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "Completion timeout!\n");
goto abort;
}
diff --git a/drivers/i2c/busses/i2c-cpm.c b/drivers/i2c/busses/i2c-cpm.c
index 3fcf78e906d..b5db8b88361 100644
--- a/drivers/i2c/busses/i2c-cpm.c
+++ b/drivers/i2c/busses/i2c-cpm.c
@@ -531,16 +531,16 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)
rbdf = cpm->rbase;
for (i = 0; i < CPM_MAXBD; i++) {
- cpm->rxbuf[i] = dma_alloc_coherent(
- NULL, CPM_MAX_READ + 1, &cpm->rxdma[i], GFP_KERNEL);
+ cpm->rxbuf[i] = dma_alloc_coherent(&cpm->ofdev->dev,
+ CPM_MAX_READ + 1,
+ &cpm->rxdma[i], GFP_KERNEL);
if (!cpm->rxbuf[i]) {
ret = -ENOMEM;
goto out_muram;
}
out_be32(&rbdf[i].cbd_bufaddr, ((cpm->rxdma[i] + 1) & ~1));
- cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent(
- NULL, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL);
+ cpm->txbuf[i] = (unsigned char *)dma_alloc_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1, &cpm->txdma[i], GFP_KERNEL);
if (!cpm->txbuf[i]) {
ret = -ENOMEM;
goto out_muram;
@@ -585,10 +585,10 @@ static int __devinit cpm_i2c_setup(struct cpm_i2c *cpm)
out_muram:
for (i = 0; i < CPM_MAXBD; i++) {
if (cpm->rxbuf[i])
- dma_free_coherent(NULL, CPM_MAX_READ + 1,
+ dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
cpm->rxbuf[i], cpm->rxdma[i]);
if (cpm->txbuf[i])
- dma_free_coherent(NULL, CPM_MAX_READ + 1,
+ dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
cpm->txbuf[i], cpm->txdma[i]);
}
cpm_muram_free(cpm->dp_addr);
@@ -619,9 +619,9 @@ static void cpm_i2c_shutdown(struct cpm_i2c *cpm)
/* Free all memory */
for (i = 0; i < CPM_MAXBD; i++) {
- dma_free_coherent(NULL, CPM_MAX_READ + 1,
+ dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
cpm->rxbuf[i], cpm->rxdma[i]);
- dma_free_coherent(NULL, CPM_MAX_READ + 1,
+ dma_free_coherent(&cpm->ofdev->dev, CPM_MAX_READ + 1,
cpm->txbuf[i], cpm->txdma[i]);
}
diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c
index 10411848fd7..9d2c5adf5d4 100644
--- a/drivers/i2c/busses/i2c-i801.c
+++ b/drivers/i2c/busses/i2c-i801.c
@@ -237,7 +237,7 @@ static int i801_transaction(int xact)
status = inb_p(SMBHSTSTS);
} while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT));
- result = i801_check_post(status, timeout >= MAX_TIMEOUT);
+ result = i801_check_post(status, timeout > MAX_TIMEOUT);
if (result < 0)
return result;
@@ -257,9 +257,9 @@ static void i801_wait_hwpec(void)
} while ((!(status & SMBHSTSTS_INTR))
&& (timeout++ < MAX_TIMEOUT));
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT)
dev_dbg(&I801_dev->dev, "PEC Timeout!\n");
- }
+
outb_p(status, SMBHSTSTS);
}
@@ -344,7 +344,7 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data,
while ((!(status & SMBHSTSTS_BYTE_DONE))
&& (timeout++ < MAX_TIMEOUT));
- result = i801_check_post(status, timeout >= MAX_TIMEOUT);
+ result = i801_check_post(status, timeout > MAX_TIMEOUT);
if (result < 0)
return result;
diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c
index b9c01aa9003..9f6b8e0f863 100644
--- a/drivers/i2c/busses/i2c-isch.c
+++ b/drivers/i2c/busses/i2c-isch.c
@@ -112,7 +112,7 @@ static int sch_transaction(void)
} while ((temp & 0x08) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_err(&sch_adapter.dev, "SMBus Timeout!\n");
result = -ETIMEDOUT;
}
diff --git a/drivers/i2c/busses/i2c-mpc.c b/drivers/i2c/busses/i2c-mpc.c
index 4af5c09f0e8..dd778d7ae04 100644
--- a/drivers/i2c/busses/i2c-mpc.c
+++ b/drivers/i2c/busses/i2c-mpc.c
@@ -164,7 +164,7 @@ static int i2c_wait(struct mpc_i2c *i2c, unsigned timeout, int writing)
return 0;
}
-#ifdef CONFIG_PPC_52xx
+#ifdef CONFIG_PPC_MPC52xx
static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
{20, 0x20}, {22, 0x21}, {24, 0x22}, {26, 0x23},
{28, 0x24}, {30, 0x01}, {32, 0x25}, {34, 0x02},
@@ -188,7 +188,7 @@ static const struct mpc_i2c_divider mpc_i2c_dividers_52xx[] = {
int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler)
{
- const struct mpc52xx_i2c_divider *div = NULL;
+ const struct mpc_i2c_divider *div = NULL;
unsigned int pvr = mfspr(SPRN_PVR);
u32 divider;
int i;
@@ -203,7 +203,7 @@ int mpc_i2c_get_fdr_52xx(struct device_node *node, u32 clock, int prescaler)
* We want to choose an FDR/DFSR that generates an I2C bus speed that
* is equal to or lower than the requested speed.
*/
- for (i = 0; i < ARRAY_SIZE(mpc52xx_i2c_dividers); i++) {
+ for (i = 0; i < ARRAY_SIZE(mpc_i2c_dividers_52xx); i++) {
div = &mpc_i2c_dividers_52xx[i];
/* Old MPC5200 rev A CPUs do not support the high bits */
if (div->fdr & 0xc0 && pvr == 0x80822011)
@@ -219,20 +219,23 @@ static void mpc_i2c_setclock_52xx(struct device_node *node,
struct mpc_i2c *i2c,
u32 clock, u32 prescaler)
{
- int fdr = mpc52xx_i2c_get_fdr(node, clock, prescaler);
+ int ret, fdr;
+
+ ret = mpc_i2c_get_fdr_52xx(node, clock, prescaler);
+ fdr = (ret >= 0) ? ret : 0x3f; /* backward compatibility */
- if (fdr < 0)
- fdr = 0x3f; /* backward compatibility */
writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
- dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
+
+ if (ret >= 0)
+ dev_info(i2c->dev, "clock %d Hz (fdr=%d)\n", clock, fdr);
}
-#else /* !CONFIG_PPC_52xx */
+#else /* !CONFIG_PPC_MPC52xx */
static void mpc_i2c_setclock_52xx(struct device_node *node,
struct mpc_i2c *i2c,
u32 clock, u32 prescaler)
{
}
-#endif /* CONFIG_PPC_52xx*/
+#endif /* CONFIG_PPC_MPC52xx*/
#ifdef CONFIG_FSL_SOC
static const struct mpc_i2c_divider mpc_i2c_dividers_8xxx[] = {
@@ -321,14 +324,17 @@ static void mpc_i2c_setclock_8xxx(struct device_node *node,
struct mpc_i2c *i2c,
u32 clock, u32 prescaler)
{
- int fdr = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
+ int ret, fdr;
+
+ ret = mpc_i2c_get_fdr_8xxx(node, clock, prescaler);
+ fdr = (ret >= 0) ? ret : 0x1031; /* backward compatibility */
- if (fdr < 0)
- fdr = 0x1031; /* backward compatibility */
writeb(fdr & 0xff, i2c->base + MPC_I2C_FDR);
writeb((fdr >> 8) & 0xff, i2c->base + MPC_I2C_DFSRR);
- dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
- clock, fdr >> 8, fdr & 0xff);
+
+ if (ret >= 0)
+ dev_info(i2c->dev, "clock %d Hz (dfsrr=%d fdr=%d)\n",
+ clock, fdr >> 8, fdr & 0xff);
}
#else /* !CONFIG_FSL_SOC */
diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c
index 2ff4683703a..ec11d1c4e77 100644
--- a/drivers/i2c/busses/i2c-nforce2.c
+++ b/drivers/i2c/busses/i2c-nforce2.c
@@ -173,7 +173,7 @@ static int nforce2_check_status(struct i2c_adapter *adap)
temp = inb_p(NVIDIA_SMB_STS);
} while ((!temp) && (timeout++ < MAX_TIMEOUT));
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "SMBus Timeout!\n");
if (smbus->can_abort)
nforce2_abort(adap);
diff --git a/drivers/i2c/busses/i2c-pxa.c b/drivers/i2c/busses/i2c-pxa.c
index c1405c8f6ba..acc7143d965 100644
--- a/drivers/i2c/busses/i2c-pxa.c
+++ b/drivers/i2c/busses/i2c-pxa.c
@@ -265,10 +265,10 @@ static int i2c_pxa_wait_bus_not_busy(struct pxa_i2c *i2c)
show_state(i2c);
}
- if (timeout <= 0)
+ if (timeout < 0)
show_state(i2c);
- return timeout <= 0 ? I2C_RETRY : 0;
+ return timeout < 0 ? I2C_RETRY : 0;
}
static int i2c_pxa_wait_master(struct pxa_i2c *i2c)
@@ -612,7 +612,7 @@ static int i2c_pxa_pio_set_master(struct pxa_i2c *i2c)
show_state(i2c);
}
- if (timeout <= 0) {
+ if (timeout < 0) {
show_state(i2c);
dev_err(&i2c->adap.dev,
"i2c_pxa: timeout waiting for bus free\n");
diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c
index f320ab27da4..139f0c7f12a 100644
--- a/drivers/i2c/busses/i2c-sis5595.c
+++ b/drivers/i2c/busses/i2c-sis5595.c
@@ -256,7 +256,7 @@ static int sis5595_transaction(struct i2c_adapter *adap)
} while (!(temp & 0x40) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "SMBus Timeout!\n");
result = -ETIMEDOUT;
}
diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c
index 50c3610e602..70ca41e90e5 100644
--- a/drivers/i2c/busses/i2c-sis630.c
+++ b/drivers/i2c/busses/i2c-sis630.c
@@ -173,7 +173,7 @@ static int sis630_transaction_wait(struct i2c_adapter *adap, int size)
} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&adap->dev, "SMBus Timeout!\n");
result = -ETIMEDOUT;
}
diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c
index 7e1594b4057..8295885b2fd 100644
--- a/drivers/i2c/busses/i2c-sis96x.c
+++ b/drivers/i2c/busses/i2c-sis96x.c
@@ -132,7 +132,7 @@ static int sis96x_transaction(int size)
} while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT));
/* If the SMBus is still busy, we give up */
- if (timeout >= MAX_TIMEOUT) {
+ if (timeout > MAX_TIMEOUT) {
dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp);
result = -ETIMEDOUT;
}
diff --git a/drivers/ide/icside.c b/drivers/ide/icside.c
index 4e16ce68b06..36da913cc55 100644
--- a/drivers/ide/icside.c
+++ b/drivers/ide/icside.c
@@ -466,7 +466,7 @@ icside_register_v6(struct icside_state *state, struct expansion_card *ec)
struct ide_host *host;
unsigned int sel = 0;
int ret;
- hw_regs_t hw[2], *hws[] = { &hw[0], NULL, NULL, NULL };
+ hw_regs_t hw[2], *hws[] = { &hw[0], &hw[1], NULL, NULL };
struct ide_port_info d = icside_v6_port_info;
ioc_base = ecardm_iomap(ec, ECARD_RES_IOCFAST, 0, 0);
diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c
index 3d4e0996976..925eb9e245d 100644
--- a/drivers/ide/ide-cd.c
+++ b/drivers/ide/ide-cd.c
@@ -312,7 +312,6 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
ide_hwif_t *hwif = drive->hwif;
struct request *rq = hwif->rq;
int err, sense_key, do_end_request = 0;
- u8 quiet = rq->cmd_flags & REQ_QUIET;
/* get the IDE error register */
err = ide_read_error(drive);
@@ -347,7 +346,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
} else {
cdrom_saw_media_change(drive);
- if (blk_fs_request(rq) && !quiet)
+ if (blk_fs_request(rq) && !blk_rq_quiet(rq))
printk(KERN_ERR PFX "%s: tray open\n",
drive->name);
}
@@ -382,7 +381,7 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
* No point in retrying after an illegal request or data
* protect error.
*/
- if (!quiet)
+ if (!blk_rq_quiet(rq))
ide_dump_status(drive, "command error", stat);
do_end_request = 1;
break;
@@ -391,14 +390,14 @@ static int cdrom_decode_status(ide_drive_t *drive, u8 stat)
* No point in re-trying a zillion times on a bad sector.
* If we got here the error is not correctable.
*/
- if (!quiet)
+ if (!blk_rq_quiet(rq))
ide_dump_status(drive, "media error "
"(bad sector)", stat);
do_end_request = 1;
break;
case BLANK_CHECK:
/* disk appears blank? */
- if (!quiet)
+ if (!blk_rq_quiet(rq))
ide_dump_status(drive, "media error (blank)",
stat);
do_end_request = 1;
diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c
index 35dc38d3b2c..6415a2e2ba8 100644
--- a/drivers/ide/ide-io.c
+++ b/drivers/ide/ide-io.c
@@ -696,7 +696,7 @@ void ide_timer_expiry (unsigned long data)
}
spin_lock_irq(&hwif->lock);
enable_irq(hwif->irq);
- if (startstop == ide_stopped) {
+ if (startstop == ide_stopped && hwif->polling == 0) {
ide_unlock_port(hwif);
plug_device = 1;
}
@@ -868,7 +868,7 @@ irqreturn_t ide_intr (int irq, void *dev_id)
* same irq as is currently being serviced here, and Linux
* won't allow another of the same (on any CPU) until we return.
*/
- if (startstop == ide_stopped) {
+ if (startstop == ide_stopped && hwif->polling == 0) {
BUG_ON(hwif->handler);
ide_unlock_port(hwif);
plug_device = 1;
diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c
index c19a221b1e1..06fe002116e 100644
--- a/drivers/ide/ide-iops.c
+++ b/drivers/ide/ide-iops.c
@@ -206,8 +206,6 @@ EXPORT_SYMBOL_GPL(ide_in_drive_list);
/*
* Early UDMA66 devices don't set bit14 to 1, only bit13 is valid.
- * We list them here and depend on the device side cable detection for them.
- *
* Some optical devices with the buggy firmwares have the same problem.
*/
static const struct drive_list_entry ivb_list[] = {
@@ -251,10 +249,25 @@ u8 eighty_ninty_three(ide_drive_t *drive)
* - force bit13 (80c cable present) check also for !ivb devices
* (unless the slave device is pre-ATA3)
*/
- if ((id[ATA_ID_HW_CONFIG] & 0x4000) ||
- (ivb && (id[ATA_ID_HW_CONFIG] & 0x2000)))
+ if (id[ATA_ID_HW_CONFIG] & 0x4000)
return 1;
+ if (ivb) {
+ const char *model = (char *)&id[ATA_ID_PROD];
+
+ if (strstr(model, "TSSTcorp CDDVDW SH-S202")) {
+ /*
+ * These ATAPI devices always report 80c cable
+ * so we have to depend on the host in this case.
+ */
+ if (hwif->cbl == ATA_CBL_PATA80)
+ return 1;
+ } else {
+ /* Depend on the device side cable detection. */
+ if (id[ATA_ID_HW_CONFIG] & 0x2000)
+ return 1;
+ }
+ }
no_80w:
if (drive->dev_flags & IDE_DFLAG_UDMA33_WARNED)
return 0;
diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c
index 56ff8c46c7d..2148df836ce 100644
--- a/drivers/ide/ide-lib.c
+++ b/drivers/ide/ide-lib.c
@@ -31,24 +31,6 @@ void ide_toggle_bounce(ide_drive_t *drive, int on)
blk_queue_bounce_limit(drive->queue, addr);
}
-static void ide_dump_opcode(ide_drive_t *drive)
-{
- struct request *rq = drive->hwif->rq;
- struct ide_cmd *cmd = NULL;
-
- if (!rq)
- return;
-
- if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE)
- cmd = rq->special;
-
- printk(KERN_ERR "ide: failed opcode was: ");
- if (cmd == NULL)
- printk(KERN_CONT "unknown\n");
- else
- printk(KERN_CONT "0x%02x\n", cmd->tf.command);
-}
-
u64 ide_get_lba_addr(struct ide_cmd *cmd, int lba48)
{
struct ide_taskfile *tf = &cmd->tf;
@@ -91,7 +73,7 @@ static void ide_dump_sector(ide_drive_t *drive)
static void ide_dump_ata_error(ide_drive_t *drive, u8 err)
{
- printk(KERN_ERR "{ ");
+ printk(KERN_CONT "{ ");
if (err & ATA_ABORTED)
printk(KERN_CONT "DriveStatusError ");
if (err & ATA_ICRC)
@@ -121,7 +103,7 @@ static void ide_dump_ata_error(ide_drive_t *drive, u8 err)
static void ide_dump_atapi_error(ide_drive_t *drive, u8 err)
{
- printk(KERN_ERR "{ ");
+ printk(KERN_CONT "{ ");
if (err & ATAPI_ILI)
printk(KERN_CONT "IllegalLengthIndication ");
if (err & ATAPI_EOM)
@@ -179,7 +161,10 @@ u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat)
else
ide_dump_atapi_error(drive, err);
}
- ide_dump_opcode(drive);
+
+ printk(KERN_ERR "%s: possibly failed opcode: 0x%02x\n",
+ drive->name, drive->hwif->cmd.tf.command);
+
return err;
}
EXPORT_SYMBOL(ide_dump_status);
diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c
index 7f264ed1141..c895ed52b2e 100644
--- a/drivers/ide/ide-probe.c
+++ b/drivers/ide/ide-probe.c
@@ -295,7 +295,7 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id)
timeout = ((cmd == ATA_CMD_ID_ATA) ? WAIT_WORSTCASE : WAIT_PIDENTIFY) / 2;
- if (ide_busy_sleep(hwif, timeout, use_altstatus))
+ if (ide_busy_sleep(drive, timeout, use_altstatus))
return 1;
/* wait for IRQ and ATA_DRQ */
@@ -316,8 +316,9 @@ int ide_dev_read_id(ide_drive_t *drive, u8 cmd, u16 *id)
return rc;
}
-int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus)
+int ide_busy_sleep(ide_drive_t *drive, unsigned long timeout, int altstatus)
{
+ ide_hwif_t *hwif = drive->hwif;
u8 stat;
timeout += jiffies;
@@ -330,6 +331,8 @@ int ide_busy_sleep(ide_hwif_t *hwif, unsigned long timeout, int altstatus)
return 0;
} while (time_before(jiffies, timeout));
+ printk(KERN_ERR "%s: timeout in %s\n", drive->name, __func__);
+
return 1; /* drive timed-out */
}
@@ -420,7 +423,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd)
tp_ops->dev_select(drive);
msleep(50);
tp_ops->exec_command(hwif, ATA_CMD_DEV_RESET);
- (void)ide_busy_sleep(hwif, WAIT_WORSTCASE, 0);
+ (void)ide_busy_sleep(drive, WAIT_WORSTCASE, 0);
rc = ide_dev_read_id(drive, cmd, id);
}
diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c
index cb942a9b580..3a53e0834cf 100644
--- a/drivers/ide/ide-tape.c
+++ b/drivers/ide/ide-tape.c
@@ -614,12 +614,6 @@ static ide_startstop_t ide_tape_issue_pc(ide_drive_t *drive,
{
idetape_tape_t *tape = drive->driver_data;
- if (drive->pc->c[0] == REQUEST_SENSE &&
- pc->c[0] == REQUEST_SENSE) {
- printk(KERN_ERR "ide-tape: possible ide-tape.c bug - "
- "Two request sense in serial were issued\n");
- }
-
if (drive->failed_pc == NULL && pc->c[0] != REQUEST_SENSE)
drive->failed_pc = pc;
diff --git a/drivers/ide/piix.c b/drivers/ide/piix.c
index 2aa69993306..69860dea382 100644
--- a/drivers/ide/piix.c
+++ b/drivers/ide/piix.c
@@ -263,6 +263,7 @@ static const struct ich_laptop ich_laptop[] = {
{ 0x24CA, 0x1025, 0x003d }, /* ICH4 on ACER TM290 */
{ 0x266F, 0x1025, 0x0066 }, /* ICH6 on ACER Aspire 1694WLMi */
{ 0x2653, 0x1043, 0x82D8 }, /* ICH6M on Asus Eee 701 */
+ { 0x27df, 0x104d, 0x900e }, /* ICH7 on Sony TZ-90 */
/* end marker */
{ 0, }
};
diff --git a/drivers/ide/via82cxxx.c b/drivers/ide/via82cxxx.c
index 3ff7231e485..028de26a25f 100644
--- a/drivers/ide/via82cxxx.c
+++ b/drivers/ide/via82cxxx.c
@@ -67,6 +67,7 @@ static struct via_isa_bridge {
u8 udma_mask;
u8 flags;
} via_isa_bridges[] = {
+ { "vx855", PCI_DEVICE_ID_VIA_VX855, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
{ "vx800", PCI_DEVICE_ID_VIA_VX800, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
{ "cx700", PCI_DEVICE_ID_VIA_CX700, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
{ "vt8237s", PCI_DEVICE_ID_VIA_8237S, 0x00, 0x2f, ATA_UDMA6, VIA_BAD_AST },
@@ -474,6 +475,7 @@ static const struct pci_device_id via_pci_tbl[] = {
{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C576_1), 0 },
{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_82C586_1), 0 },
{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_CX700_IDE), 0 },
+ { PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_VX855_IDE), 0 },
{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_6410), 1 },
{ PCI_VDEVICE(VIA, PCI_DEVICE_ID_VIA_SATA_EIDE), 1 },
{ 0, },
diff --git a/drivers/infiniband/hw/cxgb3/cxio_hal.c b/drivers/infiniband/hw/cxgb3/cxio_hal.c
index 8d71086f5a1..62f9cf2f94e 100644
--- a/drivers/infiniband/hw/cxgb3/cxio_hal.c
+++ b/drivers/infiniband/hw/cxgb3/cxio_hal.c
@@ -410,6 +410,7 @@ int cxio_flush_sq(struct t3_wq *wq, struct t3_cq *cq, int count)
ptr = wq->sq_rptr + count;
sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2);
while (ptr != wq->sq_wptr) {
+ sqp->signaled = 0;
insert_sq_cqe(wq, cq, sqp);
ptr++;
sqp = wq->sq + Q_PTR2IDX(ptr, wq->sq_size_log2);
diff --git a/drivers/infiniband/hw/ipath/ipath_fs.c b/drivers/infiniband/hw/ipath/ipath_fs.c
index 8dc2bb78160..b3684060465 100644
--- a/drivers/infiniband/hw/ipath/ipath_fs.c
+++ b/drivers/infiniband/hw/ipath/ipath_fs.c
@@ -347,7 +347,7 @@ static int ipathfs_fill_super(struct super_block *sb, void *data,
spin_unlock_irqrestore(&ipath_devs_lock, flags);
ret = create_device_files(sb, dd);
if (ret) {
- deactivate_super(sb);
+ deactivate_locked_super(sb);
goto bail;
}
spin_lock_irqsave(&ipath_devs_lock, flags);
diff --git a/drivers/infiniband/hw/mlx4/mlx4_ib.h b/drivers/infiniband/hw/mlx4/mlx4_ib.h
index 9974e886b8d..8a7dd6795fa 100644
--- a/drivers/infiniband/hw/mlx4/mlx4_ib.h
+++ b/drivers/infiniband/hw/mlx4/mlx4_ib.h
@@ -86,6 +86,7 @@ struct mlx4_ib_mr {
struct mlx4_ib_fast_reg_page_list {
struct ib_fast_reg_page_list ibfrpl;
+ __be64 *mapped_page_list;
dma_addr_t map;
};
diff --git a/drivers/infiniband/hw/mlx4/mr.c b/drivers/infiniband/hw/mlx4/mr.c
index 8e4d26d56a9..8f3666b20ea 100644
--- a/drivers/infiniband/hw/mlx4/mr.c
+++ b/drivers/infiniband/hw/mlx4/mr.c
@@ -231,7 +231,11 @@ struct ib_fast_reg_page_list *mlx4_ib_alloc_fast_reg_page_list(struct ib_device
if (!mfrpl)
return ERR_PTR(-ENOMEM);
- mfrpl->ibfrpl.page_list = dma_alloc_coherent(&dev->dev->pdev->dev,
+ mfrpl->ibfrpl.page_list = kmalloc(size, GFP_KERNEL);
+ if (!mfrpl->ibfrpl.page_list)
+ goto err_free;
+
+ mfrpl->mapped_page_list = dma_alloc_coherent(&dev->dev->pdev->dev,
size, &mfrpl->map,
GFP_KERNEL);
if (!mfrpl->ibfrpl.page_list)
@@ -242,6 +246,7 @@ struct ib_fast_reg_page_list *mlx4_ib_alloc_fast_reg_page_list(struct ib_device
return &mfrpl->ibfrpl;
err_free:
+ kfree(mfrpl->ibfrpl.page_list);
kfree(mfrpl);
return ERR_PTR(-ENOMEM);
}
@@ -252,8 +257,9 @@ void mlx4_ib_free_fast_reg_page_list(struct ib_fast_reg_page_list *page_list)
struct mlx4_ib_fast_reg_page_list *mfrpl = to_mfrpl(page_list);
int size = page_list->max_page_list_len * sizeof (u64);
- dma_free_coherent(&dev->dev->pdev->dev, size, page_list->page_list,
+ dma_free_coherent(&dev->dev->pdev->dev, size, mfrpl->mapped_page_list,
mfrpl->map);
+ kfree(mfrpl->ibfrpl.page_list);
kfree(mfrpl);
}
diff --git a/drivers/infiniband/hw/mlx4/qp.c b/drivers/infiniband/hw/mlx4/qp.c
index f385a24d31d..20724aee76f 100644
--- a/drivers/infiniband/hw/mlx4/qp.c
+++ b/drivers/infiniband/hw/mlx4/qp.c
@@ -1365,7 +1365,7 @@ static void set_fmr_seg(struct mlx4_wqe_fmr_seg *fseg, struct ib_send_wr *wr)
int i;
for (i = 0; i < wr->wr.fast_reg.page_list_len; ++i)
- wr->wr.fast_reg.page_list->page_list[i] =
+ mfrpl->mapped_page_list[i] =
cpu_to_be64(wr->wr.fast_reg.page_list->page_list[i] |
MLX4_MTT_FLAG_PRESENT);
diff --git a/drivers/infiniband/ulp/iser/iscsi_iser.c b/drivers/infiniband/ulp/iser/iscsi_iser.c
index 13d7674b293..75223f50de5 100644
--- a/drivers/infiniband/ulp/iser/iscsi_iser.c
+++ b/drivers/infiniband/ulp/iser/iscsi_iser.c
@@ -599,6 +599,7 @@ static struct scsi_host_template iscsi_iser_sht = {
.eh_abort_handler = iscsi_eh_abort,
.eh_device_reset_handler= iscsi_eh_device_reset,
.eh_target_reset_handler= iscsi_eh_target_reset,
+ .target_alloc = iscsi_target_alloc,
.use_clustering = DISABLE_CLUSTERING,
.proc_name = "iscsi_iser",
.this_id = -1,
diff --git a/drivers/input/ff-memless.c b/drivers/input/ff-memless.c
index bc4e40f3ede..2d1415e1683 100644
--- a/drivers/input/ff-memless.c
+++ b/drivers/input/ff-memless.c
@@ -226,7 +226,7 @@ static int get_compatible_type(struct ff_device *ff, int effect_type)
*/
static void ml_combine_effects(struct ff_effect *effect,
struct ml_effect_state *state,
- int gain)
+ unsigned int gain)
{
struct ff_effect *new = state->effect;
unsigned int strong, weak, i;
diff --git a/drivers/input/input.c b/drivers/input/input.c
index 935a1835de2..e54e002665b 100644
--- a/drivers/input/input.c
+++ b/drivers/input/input.c
@@ -29,6 +29,23 @@ MODULE_LICENSE("GPL");
#define INPUT_DEVICES 256
+/*
+ * EV_ABS events which should not be cached are listed here.
+ */
+static unsigned int input_abs_bypass_init_data[] __initdata = {
+ ABS_MT_TOUCH_MAJOR,
+ ABS_MT_TOUCH_MINOR,
+ ABS_MT_WIDTH_MAJOR,
+ ABS_MT_WIDTH_MINOR,
+ ABS_MT_ORIENTATION,
+ ABS_MT_POSITION_X,
+ ABS_MT_POSITION_Y,
+ ABS_MT_TOOL_TYPE,
+ ABS_MT_BLOB_ID,
+ 0
+};
+static unsigned long input_abs_bypass[BITS_TO_LONGS(ABS_CNT)];
+
static LIST_HEAD(input_dev_list);
static LIST_HEAD(input_handler_list);
@@ -161,6 +178,10 @@ static void input_handle_event(struct input_dev *dev,
disposition = INPUT_PASS_TO_HANDLERS;
}
break;
+ case SYN_MT_REPORT:
+ dev->sync = 0;
+ disposition = INPUT_PASS_TO_HANDLERS;
+ break;
}
break;
@@ -192,6 +213,11 @@ static void input_handle_event(struct input_dev *dev,
case EV_ABS:
if (is_event_supported(code, dev->absbit, ABS_MAX)) {
+ if (test_bit(code, input_abs_bypass)) {
+ disposition = INPUT_PASS_TO_HANDLERS;
+ break;
+ }
+
value = input_defuzz_abs_event(value,
dev->abs[code], dev->absfuzz[code]);
@@ -1634,10 +1660,20 @@ static const struct file_operations input_fops = {
.open = input_open_file,
};
+static void __init input_init_abs_bypass(void)
+{
+ const unsigned int *p;
+
+ for (p = input_abs_bypass_init_data; *p; p++)
+ input_abs_bypass[BIT_WORD(*p)] |= BIT_MASK(*p);
+}
+
static int __init input_init(void)
{
int err;
+ input_init_abs_bypass();
+
err = class_register(&input_class);
if (err) {
printk(KERN_ERR "input: unable to register input_dev class\n");
diff --git a/drivers/input/joydev.c b/drivers/input/joydev.c
index 4224f011284..012a5e75399 100644
--- a/drivers/input/joydev.c
+++ b/drivers/input/joydev.c
@@ -843,7 +843,13 @@ static const struct input_device_id joydev_blacklist[] = {
INPUT_DEVICE_ID_MATCH_KEYBIT,
.evbit = { BIT_MASK(EV_KEY) },
.keybit = { [BIT_WORD(BTN_TOUCH)] = BIT_MASK(BTN_TOUCH) },
- }, /* Avoid itouchpads, touchscreens and tablets */
+ }, /* Avoid itouchpads and touchscreens */
+ {
+ .flags = INPUT_DEVICE_ID_MATCH_EVBIT |
+ INPUT_DEVICE_ID_MATCH_KEYBIT,
+ .evbit = { BIT_MASK(EV_KEY) },
+ .keybit = { [BIT_WORD(BTN_DIGI)] = BIT_MASK(BTN_DIGI) },
+ }, /* Avoid tablets, digitisers and similar devices */
{ } /* Terminating entry */
};
diff --git a/drivers/input/keyboard/atkbd.c b/drivers/input/keyboard/atkbd.c
index 444dec07e5d..df3f8aa6811 100644
--- a/drivers/input/keyboard/atkbd.c
+++ b/drivers/input/keyboard/atkbd.c
@@ -895,6 +895,13 @@ static unsigned int atkbd_amilo_pa1510_forced_release_keys[] = {
};
/*
+ * Amilo Xi 3650 key release for light touch bar not working
+ */
+static unsigned int atkbd_amilo_xi3650_forced_release_keys[] = {
+ 0x67, 0xed, 0x90, 0xa2, 0x99, 0xa4, 0xae, 0xb0, -1U
+};
+
+/*
* atkbd_set_keycode_table() initializes keyboard's keycode table
* according to the selected scancode set
*/
@@ -1560,6 +1567,15 @@ static struct dmi_system_id atkbd_dmi_quirk_table[] __initdata = {
.callback = atkbd_setup_forced_release,
.driver_data = atkbd_amilo_pa1510_forced_release_keys,
},
+ {
+ .ident = "Fujitsu Amilo Xi 3650",
+ .matches = {
+ DMI_MATCH(DMI_SYS_VENDOR, "FUJITSU SIEMENS"),
+ DMI_MATCH(DMI_PRODUCT_NAME, "AMILO Xi 3650"),
+ },
+ .callback = atkbd_setup_forced_release,
+ .driver_data = atkbd_amilo_xi3650_forced_release_keys,
+ },
{ }
};
diff --git a/drivers/input/keyboard/omap-keypad.c b/drivers/input/keyboard/omap-keypad.c
index 058fa8b02c2..87ec7b18ac6 100644
--- a/drivers/input/keyboard/omap-keypad.c
+++ b/drivers/input/keyboard/omap-keypad.c
@@ -100,8 +100,20 @@ static irqreturn_t omap_kp_interrupt(int irq, void *dev_id)
/* disable keyboard interrupt and schedule for handling */
if (cpu_is_omap24xx()) {
int i;
- for (i = 0; i < omap_kp->rows; i++)
- disable_irq(gpio_to_irq(row_gpios[i]));
+
+ for (i = 0; i < omap_kp->rows; i++) {
+ int gpio_irq = gpio_to_irq(row_gpios[i]);
+ /*
+ * The interrupt which we're currently handling should
+ * be disabled _nosync() to avoid deadlocks waiting
+ * for this handler to complete. All others should
+ * be disabled the regular way for SMP safety.
+ */
+ if (gpio_irq == irq)
+ disable_irq_nosync(gpio_irq);
+ else
+ disable_irq(gpio_irq);
+ }
} else
/* disable keyboard interrupt and schedule for handling */
omap_writew(1, OMAP_MPUIO_BASE + OMAP_MPUIO_KBD_MASKIT);
diff --git a/drivers/input/mouse/alps.c b/drivers/input/mouse/alps.c
index cbedf957cc5..daecc75c72e 100644
--- a/drivers/input/mouse/alps.c
+++ b/drivers/input/mouse/alps.c
@@ -37,6 +37,7 @@
#define ALPS_FW_BK_2 0x40
static const struct alps_model_info alps_model_data[] = {
+ { { 0x32, 0x02, 0x14 }, 0xf8, 0xf8, ALPS_PASS | ALPS_DUALPOINT }, /* Toshiba Salellite Pro M10 */
{ { 0x33, 0x02, 0x0a }, 0x88, 0xf8, ALPS_OLDPROTO }, /* UMAX-530T */
{ { 0x53, 0x02, 0x0a }, 0xf8, 0xf8, 0 },
{ { 0x53, 0x02, 0x14 }, 0xf8, 0xf8, 0 },
diff --git a/drivers/input/mouse/appletouch.c b/drivers/input/mouse/appletouch.c
index 454b96112f0..e0140fdc02a 100644
--- a/drivers/input/mouse/appletouch.c
+++ b/drivers/input/mouse/appletouch.c
@@ -255,15 +255,22 @@ MODULE_PARM_DESC(debug, "Activate debugging output");
*/
static int atp_geyser_init(struct usb_device *udev)
{
- char data[8];
+ char *data;
int size;
int i;
+ int ret;
+
+ data = kmalloc(8, GFP_KERNEL);
+ if (!data) {
+ err("Out of memory");
+ return -ENOMEM;
+ }
size = usb_control_msg(udev, usb_rcvctrlpipe(udev, 0),
ATP_GEYSER_MODE_READ_REQUEST_ID,
USB_DIR_IN | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
ATP_GEYSER_MODE_REQUEST_VALUE,
- ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000);
+ ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000);
if (size != 8) {
dprintk("atp_geyser_init: read error\n");
@@ -271,7 +278,8 @@ static int atp_geyser_init(struct usb_device *udev)
dprintk("appletouch[%d]: %d\n", i, data[i]);
err("Failed to read mode from device.");
- return -EIO;
+ ret = -EIO;
+ goto out_free;
}
/* Apply the mode switch */
@@ -281,7 +289,7 @@ static int atp_geyser_init(struct usb_device *udev)
ATP_GEYSER_MODE_WRITE_REQUEST_ID,
USB_DIR_OUT | USB_TYPE_CLASS | USB_RECIP_INTERFACE,
ATP_GEYSER_MODE_REQUEST_VALUE,
- ATP_GEYSER_MODE_REQUEST_INDEX, &data, 8, 5000);
+ ATP_GEYSER_MODE_REQUEST_INDEX, data, 8, 5000);
if (size != 8) {
dprintk("atp_geyser_init: write error\n");
@@ -289,9 +297,13 @@ static int atp_geyser_init(struct usb_device *udev)
dprintk("appletouch[%d]: %d\n", i, data[i]);
err("Failed to request geyser raw mode");
- return -EIO;
+ ret = -EIO;
+ goto out_free;
}
- return 0;
+ ret = 0;
+out_free:
+ kfree(data);
+ return ret;
}
/*
diff --git a/drivers/input/mouse/bcm5974.c b/drivers/input/mouse/bcm5974.c
index 2998a6ac9ae..2d8fc0bf692 100644
--- a/drivers/input/mouse/bcm5974.c
+++ b/drivers/input/mouse/bcm5974.c
@@ -51,6 +51,10 @@
#define USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI 0x0230
#define USB_DEVICE_ID_APPLE_WELLSPRING2_ISO 0x0231
#define USB_DEVICE_ID_APPLE_WELLSPRING2_JIS 0x0232
+/* Macbook5,1 (unibody), aka wellspring3 */
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI 0x0236
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_ISO 0x0237
+#define USB_DEVICE_ID_APPLE_WELLSPRING3_JIS 0x0238
#define BCM5974_DEVICE(prod) { \
.match_flags = (USB_DEVICE_ID_MATCH_DEVICE | \
@@ -72,6 +76,10 @@ static const struct usb_device_id bcm5974_table[] = {
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_ISO),
BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING2_JIS),
+ /* Macbook5,1 */
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_ISO),
+ BCM5974_DEVICE(USB_DEVICE_ID_APPLE_WELLSPRING3_JIS),
/* Terminating entry */
{}
};
@@ -96,14 +104,23 @@ struct bt_data {
u8 rel_y; /* relative y coordinate */
};
-/* trackpad header structure */
-struct tp_header {
- u8 unknown1[16]; /* constants, timers, etc */
- u8 fingers; /* number of fingers on trackpad */
- u8 unknown2[9]; /* constants, timers, etc */
+/* trackpad header types */
+enum tp_type {
+ TYPE1, /* plain trackpad */
+ TYPE2 /* button integrated in trackpad */
};
-/* trackpad finger structure */
+/* trackpad finger data offsets, le16-aligned */
+#define FINGER_TYPE1 (13 * sizeof(__le16))
+#define FINGER_TYPE2 (15 * sizeof(__le16))
+
+/* trackpad button data offsets */
+#define BUTTON_TYPE2 15
+
+/* list of device capability bits */
+#define HAS_INTEGRATED_BUTTON 1
+
+/* trackpad finger structure, le16-aligned */
struct tp_finger {
__le16 origin; /* zero when switching track finger */
__le16 abs_x; /* absolute x coodinate */
@@ -117,13 +134,11 @@ struct tp_finger {
__le16 force_minor; /* trackpad force, minor axis? */
__le16 unused[3]; /* zeros */
__le16 multi; /* one finger: varies, more fingers: constant */
-};
+} __attribute__((packed,aligned(2)));
-/* trackpad data structure, empirically at least ten fingers */
-struct tp_data {
- struct tp_header header;
- struct tp_finger finger[16];
-};
+/* trackpad finger data size, empirically at least ten fingers */
+#define SIZEOF_FINGER sizeof(struct tp_finger)
+#define SIZEOF_ALL_FINGERS (16 * SIZEOF_FINGER)
/* device-specific parameters */
struct bcm5974_param {
@@ -136,9 +151,12 @@ struct bcm5974_param {
/* device-specific configuration */
struct bcm5974_config {
int ansi, iso, jis; /* the product id of this device */
+ int caps; /* device capability bitmask */
int bt_ep; /* the endpoint of the button interface */
int bt_datalen; /* data length of the button interface */
int tp_ep; /* the endpoint of the trackpad interface */
+ enum tp_type tp_type; /* type of trackpad interface */
+ int tp_offset; /* offset to trackpad finger data */
int tp_datalen; /* data length of the trackpad interface */
struct bcm5974_param p; /* finger pressure limits */
struct bcm5974_param w; /* finger width limits */
@@ -158,7 +176,7 @@ struct bcm5974 {
struct urb *bt_urb; /* button usb request block */
struct bt_data *bt_data; /* button transferred data */
struct urb *tp_urb; /* trackpad usb request block */
- struct tp_data *tp_data; /* trackpad transferred data */
+ u8 *tp_data; /* trackpad transferred data */
int fingers; /* number of fingers on trackpad */
};
@@ -183,8 +201,9 @@ static const struct bcm5974_config bcm5974_config_table[] = {
USB_DEVICE_ID_APPLE_WELLSPRING_ANSI,
USB_DEVICE_ID_APPLE_WELLSPRING_ISO,
USB_DEVICE_ID_APPLE_WELLSPRING_JIS,
+ 0,
0x84, sizeof(struct bt_data),
- 0x81, sizeof(struct tp_data),
+ 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS,
{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
{ DIM_X, DIM_X / SN_COORD, -4824, 5342 },
@@ -194,13 +213,26 @@ static const struct bcm5974_config bcm5974_config_table[] = {
USB_DEVICE_ID_APPLE_WELLSPRING2_ANSI,
USB_DEVICE_ID_APPLE_WELLSPRING2_ISO,
USB_DEVICE_ID_APPLE_WELLSPRING2_JIS,
+ 0,
0x84, sizeof(struct bt_data),
- 0x81, sizeof(struct tp_data),
+ 0x81, TYPE1, FINGER_TYPE1, FINGER_TYPE1 + SIZEOF_ALL_FINGERS,
{ DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 256 },
{ DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
{ DIM_X, DIM_X / SN_COORD, -4824, 4824 },
{ DIM_Y, DIM_Y / SN_COORD, -172, 4290 }
},
+ {
+ USB_DEVICE_ID_APPLE_WELLSPRING3_ANSI,
+ USB_DEVICE_ID_APPLE_WELLSPRING3_ISO,
+ USB_DEVICE_ID_APPLE_WELLSPRING3_JIS,
+ HAS_INTEGRATED_BUTTON,
+ 0x84, sizeof(struct bt_data),
+ 0x81, TYPE2, FINGER_TYPE2, FINGER_TYPE2 + SIZEOF_ALL_FINGERS,
+ { DIM_PRESSURE, DIM_PRESSURE / SN_PRESSURE, 0, 300 },
+ { DIM_WIDTH, DIM_WIDTH / SN_WIDTH, 0, 2048 },
+ { DIM_X, DIM_X / SN_COORD, -4460, 5166 },
+ { DIM_Y, DIM_Y / SN_COORD, -75, 6700 }
+ },
{}
};
@@ -257,6 +289,7 @@ static void setup_events_to_report(struct input_dev *input_dev,
__set_bit(BTN_TOOL_FINGER, input_dev->keybit);
__set_bit(BTN_TOOL_DOUBLETAP, input_dev->keybit);
__set_bit(BTN_TOOL_TRIPLETAP, input_dev->keybit);
+ __set_bit(BTN_TOOL_QUADTAP, input_dev->keybit);
__set_bit(BTN_LEFT, input_dev->keybit);
}
@@ -266,6 +299,11 @@ static int report_bt_state(struct bcm5974 *dev, int size)
if (size != sizeof(struct bt_data))
return -EIO;
+ dprintk(7,
+ "bcm5974: button data: %x %x %x %x\n",
+ dev->bt_data->unknown1, dev->bt_data->button,
+ dev->bt_data->rel_x, dev->bt_data->rel_y);
+
input_report_key(dev->input, BTN_LEFT, dev->bt_data->button);
input_sync(dev->input);
@@ -276,29 +314,37 @@ static int report_bt_state(struct bcm5974 *dev, int size)
static int report_tp_state(struct bcm5974 *dev, int size)
{
const struct bcm5974_config *c = &dev->cfg;
- const struct tp_finger *f = dev->tp_data->finger;
+ const struct tp_finger *f;
struct input_dev *input = dev->input;
- const int fingers = (size - 26) / 28;
- int raw_p, raw_w, raw_x, raw_y;
- int ptest = 0, origin = 0, nmin = 0, nmax = 0;
+ int raw_p, raw_w, raw_x, raw_y, raw_n;
+ int ptest = 0, origin = 0, ibt = 0, nmin = 0, nmax = 0;
int abs_p = 0, abs_w = 0, abs_x = 0, abs_y = 0;
- if (size < 26 || (size - 26) % 28 != 0)
+ if (size < c->tp_offset || (size - c->tp_offset) % SIZEOF_FINGER != 0)
return -EIO;
+ /* finger data, le16-aligned */
+ f = (const struct tp_finger *)(dev->tp_data + c->tp_offset);
+ raw_n = (size - c->tp_offset) / SIZEOF_FINGER;
+
/* always track the first finger; when detached, start over */
- if (fingers) {
+ if (raw_n) {
raw_p = raw2int(f->force_major);
raw_w = raw2int(f->size_major);
raw_x = raw2int(f->abs_x);
raw_y = raw2int(f->abs_y);
dprintk(9,
- "bcm5974: raw: p: %+05d w: %+05d x: %+05d y: %+05d\n",
- raw_p, raw_w, raw_x, raw_y);
+ "bcm5974: "
+ "raw: p: %+05d w: %+05d x: %+05d y: %+05d n: %d\n",
+ raw_p, raw_w, raw_x, raw_y, raw_n);
ptest = int2bound(&c->p, raw_p);
origin = raw2int(f->origin);
+
+ /* set the integrated button if applicable */
+ if (c->tp_type == TYPE2)
+ ibt = raw2int(dev->tp_data[BUTTON_TYPE2]);
}
/* while tracking finger still valid, count all fingers */
@@ -307,12 +353,13 @@ static int report_tp_state(struct bcm5974 *dev, int size)
abs_w = int2bound(&c->w, raw_w);
abs_x = int2bound(&c->x, raw_x - c->x.devmin);
abs_y = int2bound(&c->y, c->y.devmax - raw_y);
- for (; f != dev->tp_data->finger + fingers; f++) {
+ while (raw_n--) {
ptest = int2bound(&c->p, raw2int(f->force_major));
if (ptest > PRESSURE_LOW)
nmax++;
if (ptest > PRESSURE_HIGH)
nmin++;
+ f++;
}
}
@@ -324,7 +371,8 @@ static int report_tp_state(struct bcm5974 *dev, int size)
input_report_key(input, BTN_TOUCH, dev->fingers > 0);
input_report_key(input, BTN_TOOL_FINGER, dev->fingers == 1);
input_report_key(input, BTN_TOOL_DOUBLETAP, dev->fingers == 2);
- input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers > 2);
+ input_report_key(input, BTN_TOOL_TRIPLETAP, dev->fingers == 3);
+ input_report_key(input, BTN_TOOL_QUADTAP, dev->fingers > 3);
input_report_abs(input, ABS_PRESSURE, abs_p);
input_report_abs(input, ABS_TOOL_WIDTH, abs_w);
@@ -335,11 +383,15 @@ static int report_tp_state(struct bcm5974 *dev, int size)
dprintk(8,
"bcm5974: abs: p: %+05d w: %+05d x: %+05d y: %+05d "
- "nmin: %d nmax: %d n: %d\n",
- abs_p, abs_w, abs_x, abs_y, nmin, nmax, dev->fingers);
+ "nmin: %d nmax: %d n: %d ibt: %d\n", abs_p, abs_w,
+ abs_x, abs_y, nmin, nmax, dev->fingers, ibt);
}
+ /* type 2 reports button events via ibt only */
+ if (c->tp_type == TYPE2)
+ input_report_key(input, BTN_LEFT, ibt);
+
input_sync(input);
return 0;
@@ -649,6 +701,8 @@ static int bcm5974_probe(struct usb_interface *iface,
input_dev->name = "bcm5974";
input_dev->phys = dev->phys;
usb_to_input_id(dev->udev, &input_dev->id);
+ /* report driver capabilities via the version field */
+ input_dev->id.version = cfg->caps;
input_dev->dev.parent = &iface->dev;
input_set_drvdata(input_dev, dev);
diff --git a/drivers/input/mouse/elantech.c b/drivers/input/mouse/elantech.c
index 6ab0eb1ada1..4bc78892ba9 100644
--- a/drivers/input/mouse/elantech.c
+++ b/drivers/input/mouse/elantech.c
@@ -1,7 +1,7 @@
/*
- * Elantech Touchpad driver (v5)
+ * Elantech Touchpad driver (v6)
*
- * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net>
+ * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@@ -178,6 +178,7 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
struct elantech_data *etd = psmouse->private;
unsigned char *packet = psmouse->packet;
int fingers;
+ static int old_fingers;
if (etd->fw_version_maj == 0x01) {
/* byte 0: D U p1 p2 1 p3 R L
@@ -190,6 +191,14 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
fingers = (packet[0] & 0xc0) >> 6;
}
+ if (etd->jumpy_cursor) {
+ /* Discard packets that are likely to have bogus coordinates */
+ if (fingers > old_fingers) {
+ elantech_debug("elantech.c: discarding packet\n");
+ goto discard_packet_v1;
+ }
+ }
+
input_report_key(dev, BTN_TOUCH, fingers != 0);
/* byte 2: x7 x6 x5 x4 x3 x2 x1 x0
@@ -216,6 +225,9 @@ static void elantech_report_absolute_v1(struct psmouse *psmouse)
}
input_sync(dev);
+
+ discard_packet_v1:
+ old_fingers = fingers;
}
/*
@@ -363,9 +375,14 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
rc = -1;
break;
}
+ }
+
+ if (rc == 0) {
/*
- * Read back reg 0x10. The touchpad is probably initalising
- * and not ready until we read back the value we just wrote.
+ * Read back reg 0x10. For hardware version 1 we must make
+ * sure the absolute mode bit is set. For hardware version 2
+ * the touchpad is probably initalising and not ready until
+ * we read back the value we just wrote.
*/
do {
rc = elantech_read_reg(psmouse, 0x10, &val);
@@ -373,12 +390,18 @@ static int elantech_set_absolute_mode(struct psmouse *psmouse)
break;
tries--;
elantech_debug("elantech.c: retrying read (%d).\n",
- tries);
+ tries);
msleep(ETP_READ_BACK_DELAY);
} while (tries > 0);
- if (rc)
+
+ if (rc) {
pr_err("elantech.c: failed to read back register 0x10.\n");
- break;
+ } else if (etd->hw_version == 1 &&
+ !(val & ETP_R10_ABSOLUTE_MODE)) {
+ pr_err("elantech.c: touchpad refuses "
+ "to switch to absolute mode.\n");
+ rc = -1;
+ }
}
if (rc)
@@ -662,6 +685,17 @@ int elantech_init(struct psmouse *psmouse)
param[0], param[1], param[2]);
etd->capabilities = param[0];
+ /*
+ * This firmware seems to suffer from misreporting coordinates when
+ * a touch action starts causing the mouse cursor or scrolled page
+ * to jump. Enable a workaround.
+ */
+ if (etd->fw_version_maj == 0x02 && etd->fw_version_min == 0x22) {
+ pr_info("elantech.c: firmware version 2.34 detected, "
+ "enabling jumpy cursor workaround\n");
+ etd->jumpy_cursor = 1;
+ }
+
if (elantech_set_absolute_mode(psmouse)) {
pr_err("elantech.c: failed to put touchpad into absolute mode.\n");
goto init_fail;
diff --git a/drivers/input/mouse/elantech.h b/drivers/input/mouse/elantech.h
index bee282b540b..ed848cc8081 100644
--- a/drivers/input/mouse/elantech.h
+++ b/drivers/input/mouse/elantech.h
@@ -1,7 +1,7 @@
/*
- * Elantech Touchpad driver (v5)
+ * Elantech Touchpad driver (v6)
*
- * Copyright (C) 2007-2008 Arjan Opmeer <arjan@opmeer.net>
+ * Copyright (C) 2007-2009 Arjan Opmeer <arjan@opmeer.net>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
@@ -104,6 +104,7 @@ struct elantech_data {
unsigned char fw_version_min;
unsigned char hw_version;
unsigned char paritycheck;
+ unsigned char jumpy_cursor;
unsigned char parity[256];
};
diff --git a/drivers/input/mouse/lifebook.c b/drivers/input/mouse/lifebook.c
index df81b0aaa9f..15ac3205ac0 100644
--- a/drivers/input/mouse/lifebook.c
+++ b/drivers/input/mouse/lifebook.c
@@ -61,6 +61,12 @@ static const struct dmi_system_id lifebook_dmi_table[] = {
},
},
{
+ .ident = "Lifebook B-2130",
+ .matches = {
+ DMI_MATCH(DMI_BOARD_NAME, "ZEPHYR"),
+ },
+ },
+ {
.ident = "Lifebook B213x/B2150",
.matches = {
DMI_MATCH(DMI_PRODUCT_NAME, "LifeBook B2131/B2133/B2150"),
diff --git a/drivers/input/serio/ambakmi.c b/drivers/input/serio/ambakmi.c
index e29cdc13a19..a28c06d686e 100644
--- a/drivers/input/serio/ambakmi.c
+++ b/drivers/input/serio/ambakmi.c
@@ -107,7 +107,7 @@ static void amba_kmi_close(struct serio *io)
clk_disable(kmi->clk);
}
-static int amba_kmi_probe(struct amba_device *dev, void *id)
+static int amba_kmi_probe(struct amba_device *dev, struct amba_id *id)
{
struct amba_kmi_port *kmi;
struct serio *io;
diff --git a/drivers/input/serio/sa1111ps2.c b/drivers/input/serio/sa1111ps2.c
index 57953c0eb82..f412c69478a 100644
--- a/drivers/input/serio/sa1111ps2.c
+++ b/drivers/input/serio/sa1111ps2.c
@@ -77,7 +77,7 @@ static irqreturn_t ps2_txint(int irq, void *dev_id)
spin_lock(&ps2if->lock);
status = sa1111_readl(ps2if->base + SA1111_PS2STAT);
if (ps2if->head == ps2if->tail) {
- disable_irq(irq);
+ disable_irq_nosync(irq);
/* done */
} else if (status & PS2STAT_TXE) {
sa1111_writel(ps2if->buf[ps2if->tail], ps2if->base + SA1111_PS2DATA);
diff --git a/drivers/input/tablet/wacom.h b/drivers/input/tablet/wacom.h
index 677680e9f54..9710bfd49cf 100644
--- a/drivers/input/tablet/wacom.h
+++ b/drivers/input/tablet/wacom.h
@@ -11,7 +11,7 @@
* Copyright (c) 2000 Daniel Egger <egger@suse.de>
* Copyright (c) 2001 Frederic Lepied <flepied@mandrakesoft.com>
* Copyright (c) 2004 Panagiotis Issaris <panagiotis.issaris@mech.kuleuven.ac.be>
- * Copyright (c) 2002-2008 Ping Cheng <pingc@wacom.com>
+ * Copyright (c) 2002-2009 Ping Cheng <pingc@wacom.com>
*
* ChangeLog:
* v0.1 (vp) - Initial release
@@ -67,6 +67,7 @@
* v1.47 (pc) - Added support for Bamboo
* v1.48 (pc) - Added support for Bamboo1, BambooFun, and Cintiq 12WX
* v1.49 (pc) - Added support for USB Tablet PC (0x90, 0x93, and 0x9A)
+ * v1.50 (pc) - Fixed a TabletPC touch bug in 2.6.28
*/
/*
@@ -87,7 +88,7 @@
/*
* Version Information
*/
-#define DRIVER_VERSION "v1.49"
+#define DRIVER_VERSION "v1.50"
#define DRIVER_AUTHOR "Vojtech Pavlik <vojtech@ucw.cz>"
#define DRIVER_DESC "USB Wacom Graphire and Wacom Intuos tablet driver"
#define DRIVER_LICENSE "GPL"
diff --git a/drivers/input/tablet/wacom_sys.c b/drivers/input/tablet/wacom_sys.c
index 484496daa0f..b8624f27abf 100644
--- a/drivers/input/tablet/wacom_sys.c
+++ b/drivers/input/tablet/wacom_sys.c
@@ -289,6 +289,7 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
5000); /* 5 secs */
} while (result < 0 && limit++ < 5);
+ /* No need to parse the Descriptor. It isn't an error though */
if (result < 0)
goto out;
@@ -368,9 +369,8 @@ static int wacom_parse_hid(struct usb_interface *intf, struct hid_descriptor *hi
}
}
- result = 0;
-
out:
+ result = 0;
kfree(report);
return result;
}
@@ -425,6 +425,15 @@ static int wacom_probe(struct usb_interface *intf, const struct usb_device_id *i
endpoint = &intf->cur_altsetting->endpoint[0].desc;
+ /* Initialize touch_x_max and touch_y_max in case it is not defined */
+ if (wacom_wac->features->type == TABLETPC) {
+ features->touch_x_max = 1023;
+ features->touch_y_max = 1023;
+ } else {
+ features->touch_x_max = 0;
+ features->touch_y_max = 0;
+ }
+
/* TabletPC need to retrieve the physical and logical maximum from report descriptor */
if (wacom_wac->features->type == TABLETPC) {
if (usb_get_extra_descriptor(interface, HID_DEVICET_HID, &hid_desc)) {
diff --git a/drivers/input/touchscreen/tsc2007.c b/drivers/input/touchscreen/tsc2007.c
index 4ab07024689..948e167557f 100644
--- a/drivers/input/touchscreen/tsc2007.c
+++ b/drivers/input/touchscreen/tsc2007.c
@@ -200,8 +200,9 @@ static int tsc2007_read_values(struct tsc2007 *tsc)
static enum hrtimer_restart tsc2007_timer(struct hrtimer *handle)
{
struct tsc2007 *ts = container_of(handle, struct tsc2007, timer);
+ unsigned long flags;
- spin_lock_irq(&ts->lock);
+ spin_lock_irqsave(&ts->lock, flags);
if (unlikely(!ts->get_pendown_state() && ts->pendown)) {
struct input_dev *input = ts->input;
@@ -222,7 +223,7 @@ static enum hrtimer_restart tsc2007_timer(struct hrtimer *handle)
tsc2007_send_event(ts);
}
- spin_unlock_irq(&ts->lock);
+ spin_unlock_irqrestore(&ts->lock, flags);
return HRTIMER_NORESTART;
}
@@ -235,7 +236,7 @@ static irqreturn_t tsc2007_irq(int irq, void *handle)
spin_lock_irqsave(&ts->lock, flags);
if (likely(ts->get_pendown_state())) {
- disable_irq(ts->irq);
+ disable_irq_nosync(ts->irq);
hrtimer_start(&ts->timer, ktime_set(0, TS_POLL_DELAY),
HRTIMER_MODE_REL);
}
diff --git a/drivers/input/touchscreen/ucb1400_ts.c b/drivers/input/touchscreen/ucb1400_ts.c
index e868264fe79..f100c7f4c1d 100644
--- a/drivers/input/touchscreen/ucb1400_ts.c
+++ b/drivers/input/touchscreen/ucb1400_ts.c
@@ -256,7 +256,7 @@ static irqreturn_t ucb1400_hard_irq(int irqnr, void *devid)
struct ucb1400_ts *ucb = devid;
if (irqnr == ucb->irq) {
- disable_irq(ucb->irq);
+ disable_irq_nosync(ucb->irq);
ucb->irq_pending = 1;
wake_up(&ucb->ts_wait);
return IRQ_HANDLED;
diff --git a/drivers/isdn/capi/capifs.c b/drivers/isdn/capi/capifs.c
index b129409925a..bff72d81f26 100644
--- a/drivers/isdn/capi/capifs.c
+++ b/drivers/isdn/capi/capifs.c
@@ -75,15 +75,17 @@ static int capifs_remount(struct super_block *s, int *flags, char *data)
}
}
- kfree(s->s_options);
- s->s_options = new_opt;
+ mutex_lock(&s->s_root->d_inode->i_mutex);
+ replace_mount_options(s, new_opt);
config.setuid = setuid;
config.setgid = setgid;
config.uid = uid;
config.gid = gid;
config.mode = mode;
+ mutex_unlock(&s->s_root->d_inode->i_mutex);
+
return 0;
}
@@ -154,13 +156,16 @@ void capifs_new_ncci(unsigned int number, dev_t device)
if (!inode)
return;
inode->i_ino = number+2;
+
+ dentry = get_node(number);
+
+ /* config contents is protected by root's i_mutex */
inode->i_uid = config.setuid ? config.uid : current_fsuid();
inode->i_gid = config.setgid ? config.gid : current_fsgid();
inode->i_mtime = inode->i_atime = inode->i_ctime = CURRENT_TIME;
init_special_inode(inode, S_IFCHR|config.mode, device);
//inode->i_op = &capifs_file_inode_operations;
- dentry = get_node(number);
if (!IS_ERR(dentry) && !dentry->d_inode)
d_instantiate(dentry, inode);
mutex_unlock(&capifs_root->d_inode->i_mutex);
diff --git a/drivers/md/bitmap.c b/drivers/md/bitmap.c
index 1fb91edc7de..47c68bc75a1 100644
--- a/drivers/md/bitmap.c
+++ b/drivers/md/bitmap.c
@@ -986,6 +986,9 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
oldindex = index;
oldpage = page;
+ bitmap->filemap[bitmap->file_pages++] = page;
+ bitmap->last_page_size = count;
+
if (outofdate) {
/*
* if bitmap is out of date, dirty the
@@ -998,15 +1001,9 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
write_page(bitmap, page, 1);
ret = -EIO;
- if (bitmap->flags & BITMAP_WRITE_ERROR) {
- /* release, page not in filemap yet */
- put_page(page);
+ if (bitmap->flags & BITMAP_WRITE_ERROR)
goto err;
- }
}
-
- bitmap->filemap[bitmap->file_pages++] = page;
- bitmap->last_page_size = count;
}
paddr = kmap_atomic(page, KM_USER0);
if (bitmap->flags & BITMAP_HOSTENDIAN)
@@ -1016,9 +1013,11 @@ static int bitmap_init_from_disk(struct bitmap *bitmap, sector_t start)
kunmap_atomic(paddr, KM_USER0);
if (b) {
/* if the disk bit is set, set the memory bit */
- bitmap_set_memory_bits(bitmap, i << CHUNK_BLOCK_SHIFT(bitmap),
- ((i+1) << (CHUNK_BLOCK_SHIFT(bitmap)) >= start)
- );
+ int needed = ((sector_t)(i+1) << (CHUNK_BLOCK_SHIFT(bitmap))
+ >= start);
+ bitmap_set_memory_bits(bitmap,
+ (sector_t)i << CHUNK_BLOCK_SHIFT(bitmap),
+ needed);
bit_cnt++;
set_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
}
@@ -1154,8 +1153,9 @@ void bitmap_daemon_work(struct bitmap *bitmap)
spin_lock_irqsave(&bitmap->lock, flags);
clear_page_attr(bitmap, page, BITMAP_PAGE_CLEAN);
}
- bmc = bitmap_get_counter(bitmap, j << CHUNK_BLOCK_SHIFT(bitmap),
- &blocks, 0);
+ bmc = bitmap_get_counter(bitmap,
+ (sector_t)j << CHUNK_BLOCK_SHIFT(bitmap),
+ &blocks, 0);
if (bmc) {
/*
if (j < 100) printk("bitmap: j=%lu, *bmc = 0x%x\n", j, *bmc);
@@ -1169,7 +1169,8 @@ void bitmap_daemon_work(struct bitmap *bitmap)
} else if (*bmc == 1) {
/* we can clear the bit */
*bmc = 0;
- bitmap_count_page(bitmap, j << CHUNK_BLOCK_SHIFT(bitmap),
+ bitmap_count_page(bitmap,
+ (sector_t)j << CHUNK_BLOCK_SHIFT(bitmap),
-1);
/* clear the bit */
@@ -1514,7 +1515,7 @@ void bitmap_dirty_bits(struct bitmap *bitmap, unsigned long s, unsigned long e)
unsigned long chunk;
for (chunk = s; chunk <= e; chunk++) {
- sector_t sec = chunk << CHUNK_BLOCK_SHIFT(bitmap);
+ sector_t sec = (sector_t)chunk << CHUNK_BLOCK_SHIFT(bitmap);
bitmap_set_memory_bits(bitmap, sec, 1);
bitmap_file_set_bit(bitmap, sec);
}
diff --git a/drivers/md/md.c b/drivers/md/md.c
index 612343fdde9..fccc8343a25 100644
--- a/drivers/md/md.c
+++ b/drivers/md/md.c
@@ -3066,11 +3066,8 @@ array_state_store(mddev_t *mddev, const char *buf, size_t len)
} else
err = -EBUSY;
spin_unlock_irq(&mddev->write_lock);
- } else {
- mddev->ro = 0;
- mddev->recovery_cp = MaxSector;
- err = do_md_run(mddev);
- }
+ } else
+ err = -EINVAL;
break;
case active:
if (mddev->pers) {
@@ -4297,6 +4294,7 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
{
int err = 0;
struct gendisk *disk = mddev->gendisk;
+ mdk_rdev_t *rdev;
if (atomic_read(&mddev->openers) > is_open) {
printk("md: %s still in use.\n",mdname(mddev));
@@ -4339,6 +4337,13 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
/* tell userspace to handle 'inactive' */
sysfs_notify_dirent(mddev->sysfs_state);
+ list_for_each_entry(rdev, &mddev->disks, same_set)
+ if (rdev->raid_disk >= 0) {
+ char nm[20];
+ sprintf(nm, "rd%d", rdev->raid_disk);
+ sysfs_remove_link(&mddev->kobj, nm);
+ }
+
set_capacity(disk, 0);
mddev->changed = 1;
@@ -4359,7 +4364,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
* Free resources if final stop
*/
if (mode == 0) {
- mdk_rdev_t *rdev;
printk(KERN_INFO "md: %s stopped.\n", mdname(mddev));
@@ -4371,13 +4375,6 @@ static int do_md_stop(mddev_t * mddev, int mode, int is_open)
}
mddev->bitmap_offset = 0;
- list_for_each_entry(rdev, &mddev->disks, same_set)
- if (rdev->raid_disk >= 0) {
- char nm[20];
- sprintf(nm, "rd%d", rdev->raid_disk);
- sysfs_remove_link(&mddev->kobj, nm);
- }
-
/* make sure all md_delayed_delete calls have finished */
flush_scheduled_work();
@@ -5705,37 +5702,38 @@ static void status_unused(struct seq_file *seq)
static void status_resync(struct seq_file *seq, mddev_t * mddev)
{
- sector_t max_blocks, resync, res;
- unsigned long dt, db, rt;
+ sector_t max_sectors, resync, res;
+ unsigned long dt, db;
+ sector_t rt;
int scale;
unsigned int per_milli;
- resync = (mddev->curr_resync - atomic_read(&mddev->recovery_active))/2;
+ resync = mddev->curr_resync - atomic_read(&mddev->recovery_active);
if (test_bit(MD_RECOVERY_SYNC, &mddev->recovery))
- max_blocks = mddev->resync_max_sectors >> 1;
+ max_sectors = mddev->resync_max_sectors;
else
- max_blocks = mddev->dev_sectors / 2;
+ max_sectors = mddev->dev_sectors;
/*
* Should not happen.
*/
- if (!max_blocks) {
+ if (!max_sectors) {
MD_BUG();
return;
}
/* Pick 'scale' such that (resync>>scale)*1000 will fit
- * in a sector_t, and (max_blocks>>scale) will fit in a
+ * in a sector_t, and (max_sectors>>scale) will fit in a
* u32, as those are the requirements for sector_div.
* Thus 'scale' must be at least 10
*/
scale = 10;
if (sizeof(sector_t) > sizeof(unsigned long)) {
- while ( max_blocks/2 > (1ULL<<(scale+32)))
+ while ( max_sectors/2 > (1ULL<<(scale+32)))
scale++;
}
res = (resync>>scale)*1000;
- sector_div(res, (u32)((max_blocks>>scale)+1));
+ sector_div(res, (u32)((max_sectors>>scale)+1));
per_milli = res;
{
@@ -5756,25 +5754,35 @@ static void status_resync(struct seq_file *seq, mddev_t * mddev)
(test_bit(MD_RECOVERY_SYNC, &mddev->recovery) ?
"resync" : "recovery"))),
per_milli/10, per_milli % 10,
- (unsigned long long) resync,
- (unsigned long long) max_blocks);
+ (unsigned long long) resync/2,
+ (unsigned long long) max_sectors/2);
/*
- * We do not want to overflow, so the order of operands and
- * the * 100 / 100 trick are important. We do a +1 to be
- * safe against division by zero. We only estimate anyway.
- *
* dt: time from mark until now
* db: blocks written from mark until now
* rt: remaining time
+ *
+ * rt is a sector_t, so could be 32bit or 64bit.
+ * So we divide before multiply in case it is 32bit and close
+ * to the limit.
+ * We scale the divisor (db) by 32 to avoid loosing precision
+ * near the end of resync when the number of remaining sectors
+ * is close to 'db'.
+ * We then divide rt by 32 after multiplying by db to compensate.
+ * The '+1' avoids division by zero if db is very small.
*/
dt = ((jiffies - mddev->resync_mark) / HZ);
if (!dt) dt++;
db = (mddev->curr_mark_cnt - atomic_read(&mddev->recovery_active))
- mddev->resync_mark_cnt;
- rt = (dt * ((unsigned long)(max_blocks-resync) / (db/2/100+1)))/100;
- seq_printf(seq, " finish=%lu.%lumin", rt / 60, (rt % 60)/6);
+ rt = max_sectors - resync; /* number of remaining sectors */
+ sector_div(rt, db/32+1);
+ rt *= dt;
+ rt >>= 5;
+
+ seq_printf(seq, " finish=%lu.%lumin", (unsigned long)rt / 60,
+ ((unsigned long)rt % 60)/6);
seq_printf(seq, " speed=%ldK/sec", db/2/dt);
}
@@ -5965,7 +5973,7 @@ static int md_seq_show(struct seq_file *seq, void *v)
return 0;
}
-static struct seq_operations md_seq_ops = {
+static const struct seq_operations md_seq_ops = {
.start = md_seq_start,
.next = md_seq_next,
.stop = md_seq_stop,
diff --git a/drivers/md/raid10.c b/drivers/md/raid10.c
index 81a54f17417..499620afb44 100644
--- a/drivers/md/raid10.c
+++ b/drivers/md/raid10.c
@@ -1809,17 +1809,17 @@ static sector_t sync_request(mddev_t *mddev, sector_t sector_nr, int *skipped, i
r10_bio->sector = sect;
raid10_find_phys(conf, r10_bio);
- /* Need to check if this section will still be
+
+ /* Need to check if the array will still be
* degraded
*/
- for (j=0; j<conf->copies;j++) {
- int d = r10_bio->devs[j].devnum;
- if (conf->mirrors[d].rdev == NULL ||
- test_bit(Faulty, &conf->mirrors[d].rdev->flags)) {
+ for (j=0; j<conf->raid_disks; j++)
+ if (conf->mirrors[j].rdev == NULL ||
+ test_bit(Faulty, &conf->mirrors[j].rdev->flags)) {
still_degraded = 1;
break;
}
- }
+
must_sync = bitmap_start_sync(mddev->bitmap, sect,
&sync_blocks, still_degraded);
diff --git a/drivers/media/radio/radio-sf16fmi.c b/drivers/media/radio/radio-sf16fmi.c
index 1dba8f0832a..5cf6c45b91f 100644
--- a/drivers/media/radio/radio-sf16fmi.c
+++ b/drivers/media/radio/radio-sf16fmi.c
@@ -153,7 +153,7 @@ static int vidioc_g_tuner(struct file *file, void *priv,
mult = (fmi->flags & V4L2_TUNER_CAP_LOW) ? 1 : 1000;
v->rangelow = RSF16_MINFREQ / mult;
v->rangehigh = RSF16_MAXFREQ / mult;
- v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_MODE_STEREO;
+ v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
v->capability = fmi->flags & V4L2_TUNER_CAP_LOW;
v->audmode = V4L2_TUNER_MODE_STEREO;
v->signal = fmi_getsigstr(fmi);
diff --git a/drivers/media/radio/radio-sf16fmr2.c b/drivers/media/radio/radio-sf16fmr2.c
index c09ca8600ea..935ff9bcdfc 100644
--- a/drivers/media/radio/radio-sf16fmr2.c
+++ b/drivers/media/radio/radio-sf16fmr2.c
@@ -233,7 +233,7 @@ static int vidioc_g_tuner(struct file *file, void *priv,
mult = (fmr2->flags & V4L2_TUNER_CAP_LOW) ? 1 : 1000;
v->rangelow = RSF16_MINFREQ / mult;
v->rangehigh = RSF16_MAXFREQ / mult;
- v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_MODE_STEREO;
+ v->rxsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_STEREO;
v->capability = fmr2->flags&V4L2_TUNER_CAP_LOW;
v->audmode = fmr2->stereo ? V4L2_TUNER_MODE_STEREO:
V4L2_TUNER_MODE_MONO;
diff --git a/drivers/media/video/cafe_ccic.c b/drivers/media/video/cafe_ccic.c
index 5f582726985..c4d181dde1c 100644
--- a/drivers/media/video/cafe_ccic.c
+++ b/drivers/media/video/cafe_ccic.c
@@ -774,6 +774,7 @@ static int cafe_cam_init(struct cafe_camera *cam)
ret = __cafe_cam_reset(cam);
if (ret)
goto out;
+ chip.ident = V4L2_IDENT_NONE;
chip.match.type = V4L2_CHIP_MATCH_I2C_ADDR;
chip.match.addr = cam->sensor_addr;
ret = sensor_call(cam, core, g_chip_ident, &chip);
diff --git a/drivers/media/video/cx23885/cx23885-dvb.c b/drivers/media/video/cx23885/cx23885-dvb.c
index 0c49a98213c..1dc070da865 100644
--- a/drivers/media/video/cx23885/cx23885-dvb.c
+++ b/drivers/media/video/cx23885/cx23885-dvb.c
@@ -472,7 +472,7 @@ static int dvb_register(struct cx23885_tsport *port)
static struct xc2028_ctrl ctl = {
.fname = XC2028_DEFAULT_FIRMWARE,
.max_len = 64,
- .scode_table = XC3028_FE_OREN538,
+ .demod = XC3028_FE_OREN538,
};
fe = dvb_attach(xc2028_attach,
diff --git a/drivers/media/video/ivtv/ivtv-driver.c b/drivers/media/video/ivtv/ivtv-driver.c
index b0195e8ee4d..db2ac9a99ac 100644
--- a/drivers/media/video/ivtv/ivtv-driver.c
+++ b/drivers/media/video/ivtv/ivtv-driver.c
@@ -305,14 +305,17 @@ int ivtv_waitq(wait_queue_head_t *waitq)
/* Generic utility functions */
int ivtv_msleep_timeout(unsigned int msecs, int intr)
{
- int ret;
int timeout = msecs_to_jiffies(msecs);
do {
set_current_state(intr ? TASK_INTERRUPTIBLE : TASK_UNINTERRUPTIBLE);
timeout = schedule_timeout(timeout);
- if (intr && (ret = signal_pending(current)))
- return ret;
+ if (intr) {
+ int ret = signal_pending(current);
+
+ if (ret)
+ return ret;
+ }
} while (timeout);
return 0;
}
diff --git a/drivers/media/video/ivtv/ivtv-gpio.c b/drivers/media/video/ivtv/ivtv-gpio.c
index ceb05bdcaf6..85ac707228e 100644
--- a/drivers/media/video/ivtv/ivtv-gpio.c
+++ b/drivers/media/video/ivtv/ivtv-gpio.c
@@ -190,8 +190,8 @@ static int subdev_g_tuner(struct v4l2_subdev *sd, struct v4l2_tuner *vt)
mask = itv->card->gpio_audio_detect.mask;
if (mask == 0 || (read_reg(IVTV_REG_GPIO_IN) & mask))
- vt->rxsubchans = V4L2_TUNER_MODE_STEREO |
- V4L2_TUNER_MODE_LANG1 | V4L2_TUNER_MODE_LANG2;
+ vt->rxsubchans = V4L2_TUNER_SUB_STEREO |
+ V4L2_TUNER_SUB_LANG1 | V4L2_TUNER_SUB_LANG2;
else
vt->rxsubchans = V4L2_TUNER_SUB_MONO;
return 0;
diff --git a/drivers/media/video/ivtv/ivtv-ioctl.c b/drivers/media/video/ivtv/ivtv-ioctl.c
index 4a2d464f055..c342a9fe983 100644
--- a/drivers/media/video/ivtv/ivtv-ioctl.c
+++ b/drivers/media/video/ivtv/ivtv-ioctl.c
@@ -180,7 +180,7 @@ int ivtv_set_speed(struct ivtv *itv, int speed)
/* Wait for any DMA to finish */
prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE);
- while (itv->i_flags & IVTV_F_I_DMA) {
+ while (test_bit(IVTV_F_I_DMA, &itv->i_flags)) {
got_sig = signal_pending(current);
if (got_sig)
break;
@@ -1710,7 +1710,8 @@ static int ivtv_decoder_ioctls(struct file *filp, unsigned int cmd, void *arg)
we are waiting unlock first and later lock again. */
mutex_unlock(&itv->serialize_lock);
prepare_to_wait(&itv->event_waitq, &wait, TASK_INTERRUPTIBLE);
- if ((itv->i_flags & (IVTV_F_I_EV_DEC_STOPPED|IVTV_F_I_EV_VSYNC)) == 0)
+ if (!test_bit(IVTV_F_I_EV_DEC_STOPPED, &itv->i_flags) &&
+ !test_bit(IVTV_F_I_EV_VSYNC, &itv->i_flags))
schedule();
finish_wait(&itv->event_waitq, &wait);
mutex_lock(&itv->serialize_lock);
diff --git a/drivers/media/video/ivtv/ivtv-irq.c b/drivers/media/video/ivtv/ivtv-irq.c
index 01c14d2b381..cd9db0bf33b 100644
--- a/drivers/media/video/ivtv/ivtv-irq.c
+++ b/drivers/media/video/ivtv/ivtv-irq.c
@@ -196,7 +196,7 @@ static int stream_enc_dma_append(struct ivtv_stream *s, u32 data[CX2341X_MBOX_MA
bytes_needed, s->name);
return -1;
}
- if (rc && !s->buffers_stolen && (s->s_flags & IVTV_F_S_APPL_IO)) {
+ if (rc && !s->buffers_stolen && test_bit(IVTV_F_S_APPL_IO, &s->s_flags)) {
IVTV_WARN("All %s stream buffers are full. Dropping data.\n", s->name);
IVTV_WARN("Cause: the application is not reading fast enough.\n");
}
diff --git a/drivers/media/video/ivtv/ivtv-yuv.c b/drivers/media/video/ivtv/ivtv-yuv.c
index 7912ed6b72e..c0875378acc 100644
--- a/drivers/media/video/ivtv/ivtv-yuv.c
+++ b/drivers/media/video/ivtv/ivtv-yuv.c
@@ -1063,7 +1063,8 @@ static int ivtv_yuv_udma_frame(struct ivtv *itv, struct ivtv_dma_frame *args)
prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE);
/* if no UDMA is pending and no UDMA is in progress, then the DMA
is finished */
- while (itv->i_flags & (IVTV_F_I_UDMA_PENDING | IVTV_F_I_UDMA)) {
+ while (test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags) ||
+ test_bit(IVTV_F_I_UDMA, &itv->i_flags)) {
/* don't interrupt if the DMA is in progress but break off
a still pending DMA. */
got_sig = signal_pending(current);
diff --git a/drivers/media/video/ivtv/ivtvfb.c b/drivers/media/video/ivtv/ivtvfb.c
index 66e6eb51307..fa6bb85cb4b 100644
--- a/drivers/media/video/ivtv/ivtvfb.c
+++ b/drivers/media/video/ivtv/ivtvfb.c
@@ -298,7 +298,8 @@ static int ivtvfb_prep_dec_dma_to_device(struct ivtv *itv,
prepare_to_wait(&itv->dma_waitq, &wait, TASK_INTERRUPTIBLE);
/* if no UDMA is pending and no UDMA is in progress, then the DMA
is finished */
- while (itv->i_flags & (IVTV_F_I_UDMA_PENDING | IVTV_F_I_UDMA)) {
+ while (test_bit(IVTV_F_I_UDMA_PENDING, &itv->i_flags) ||
+ test_bit(IVTV_F_I_UDMA, &itv->i_flags)) {
/* don't interrupt if the DMA is in progress but break off
a still pending DMA. */
got_sig = signal_pending(current);
diff --git a/drivers/media/video/uvc/uvc_driver.c b/drivers/media/video/uvc/uvc_driver.c
index 399412d7f02..507dc85646b 100644
--- a/drivers/media/video/uvc/uvc_driver.c
+++ b/drivers/media/video/uvc/uvc_driver.c
@@ -1726,14 +1726,17 @@ static int uvc_suspend(struct usb_interface *intf, pm_message_t message)
static int __uvc_resume(struct usb_interface *intf, int reset)
{
struct uvc_device *dev = usb_get_intfdata(intf);
- int ret;
uvc_trace(UVC_TRACE_SUSPEND, "Resuming interface %u\n",
intf->cur_altsetting->desc.bInterfaceNumber);
if (intf->cur_altsetting->desc.bInterfaceSubClass == SC_VIDEOCONTROL) {
- if (reset && (ret = uvc_ctrl_resume_device(dev)) < 0)
- return ret;
+ if (reset) {
+ int ret = uvc_ctrl_resume_device(dev);
+
+ if (ret < 0)
+ return ret;
+ }
return uvc_status_resume(dev);
}
diff --git a/drivers/media/video/uvc/uvc_video.c b/drivers/media/video/uvc/uvc_video.c
index a95e17329c5..6ce974d7362 100644
--- a/drivers/media/video/uvc/uvc_video.c
+++ b/drivers/media/video/uvc/uvc_video.c
@@ -742,7 +742,7 @@ static int uvc_alloc_urb_buffers(struct uvc_video_device *video,
/* Buffers are already allocated, bail out. */
if (video->urb_size)
- return 0;
+ return video->urb_size / psize;
/* Compute the number of packets. Bulk endpoints might transfer UVC
* payloads accross multiple URBs.
diff --git a/drivers/media/video/v4l2-ioctl.c b/drivers/media/video/v4l2-ioctl.c
index 88f10d6cbc9..be64a502ea2 100644
--- a/drivers/media/video/v4l2-ioctl.c
+++ b/drivers/media/video/v4l2-ioctl.c
@@ -42,6 +42,12 @@
printk(KERN_DEBUG "%s: " fmt, vfd->name, ## arg);\
} while (0)
+/* Zero out the end of the struct pointed to by p. Everthing after, but
+ * not including, the specified field is cleared. */
+#define CLEAR_AFTER_FIELD(p, field) \
+ memset((u8 *)(p) + offsetof(typeof(*(p)), field) + sizeof((p)->field), \
+ 0, sizeof(*(p)) - offsetof(typeof(*(p)), field) - sizeof((p)->field))
+
struct std_descr {
v4l2_std_id std;
const char *descr;
@@ -544,39 +550,39 @@ static int check_fmt(const struct v4l2_ioctl_ops *ops, enum v4l2_buf_type type)
switch (type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
- if (ops->vidioc_try_fmt_vid_cap)
+ if (ops->vidioc_g_fmt_vid_cap)
return 0;
break;
case V4L2_BUF_TYPE_VIDEO_OVERLAY:
- if (ops->vidioc_try_fmt_vid_overlay)
+ if (ops->vidioc_g_fmt_vid_overlay)
return 0;
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
- if (ops->vidioc_try_fmt_vid_out)
+ if (ops->vidioc_g_fmt_vid_out)
return 0;
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
- if (ops->vidioc_try_fmt_vid_out_overlay)
+ if (ops->vidioc_g_fmt_vid_out_overlay)
return 0;
break;
case V4L2_BUF_TYPE_VBI_CAPTURE:
- if (ops->vidioc_try_fmt_vbi_cap)
+ if (ops->vidioc_g_fmt_vbi_cap)
return 0;
break;
case V4L2_BUF_TYPE_VBI_OUTPUT:
- if (ops->vidioc_try_fmt_vbi_out)
+ if (ops->vidioc_g_fmt_vbi_out)
return 0;
break;
case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
- if (ops->vidioc_try_fmt_sliced_vbi_cap)
+ if (ops->vidioc_g_fmt_sliced_vbi_cap)
return 0;
break;
case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
- if (ops->vidioc_try_fmt_sliced_vbi_out)
+ if (ops->vidioc_g_fmt_sliced_vbi_out)
return 0;
break;
case V4L2_BUF_TYPE_PRIVATE:
- if (ops->vidioc_try_fmt_type_private)
+ if (ops->vidioc_g_fmt_type_private)
return 0;
break;
}
@@ -782,44 +788,53 @@ static long __video_do_ioctl(struct file *file,
switch (f->type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+ CLEAR_AFTER_FIELD(f, fmt.pix);
v4l_print_pix_fmt(vfd, &f->fmt.pix);
if (ops->vidioc_s_fmt_vid_cap)
ret = ops->vidioc_s_fmt_vid_cap(file, fh, f);
break;
case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+ CLEAR_AFTER_FIELD(f, fmt.win);
if (ops->vidioc_s_fmt_vid_overlay)
ret = ops->vidioc_s_fmt_vid_overlay(file,
fh, f);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+ CLEAR_AFTER_FIELD(f, fmt.pix);
v4l_print_pix_fmt(vfd, &f->fmt.pix);
if (ops->vidioc_s_fmt_vid_out)
ret = ops->vidioc_s_fmt_vid_out(file, fh, f);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
+ CLEAR_AFTER_FIELD(f, fmt.win);
if (ops->vidioc_s_fmt_vid_out_overlay)
ret = ops->vidioc_s_fmt_vid_out_overlay(file,
fh, f);
break;
case V4L2_BUF_TYPE_VBI_CAPTURE:
+ CLEAR_AFTER_FIELD(f, fmt.vbi);
if (ops->vidioc_s_fmt_vbi_cap)
ret = ops->vidioc_s_fmt_vbi_cap(file, fh, f);
break;
case V4L2_BUF_TYPE_VBI_OUTPUT:
+ CLEAR_AFTER_FIELD(f, fmt.vbi);
if (ops->vidioc_s_fmt_vbi_out)
ret = ops->vidioc_s_fmt_vbi_out(file, fh, f);
break;
case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+ CLEAR_AFTER_FIELD(f, fmt.sliced);
if (ops->vidioc_s_fmt_sliced_vbi_cap)
ret = ops->vidioc_s_fmt_sliced_vbi_cap(file,
fh, f);
break;
case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
+ CLEAR_AFTER_FIELD(f, fmt.sliced);
if (ops->vidioc_s_fmt_sliced_vbi_out)
ret = ops->vidioc_s_fmt_sliced_vbi_out(file,
fh, f);
break;
case V4L2_BUF_TYPE_PRIVATE:
+ /* CLEAR_AFTER_FIELD(f, fmt.raw_data); <- does nothing */
if (ops->vidioc_s_fmt_type_private)
ret = ops->vidioc_s_fmt_type_private(file,
fh, f);
@@ -836,46 +851,55 @@ static long __video_do_ioctl(struct file *file,
v4l2_type_names));
switch (f->type) {
case V4L2_BUF_TYPE_VIDEO_CAPTURE:
+ CLEAR_AFTER_FIELD(f, fmt.pix);
if (ops->vidioc_try_fmt_vid_cap)
ret = ops->vidioc_try_fmt_vid_cap(file, fh, f);
if (!ret)
v4l_print_pix_fmt(vfd, &f->fmt.pix);
break;
case V4L2_BUF_TYPE_VIDEO_OVERLAY:
+ CLEAR_AFTER_FIELD(f, fmt.win);
if (ops->vidioc_try_fmt_vid_overlay)
ret = ops->vidioc_try_fmt_vid_overlay(file,
fh, f);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT:
+ CLEAR_AFTER_FIELD(f, fmt.pix);
if (ops->vidioc_try_fmt_vid_out)
ret = ops->vidioc_try_fmt_vid_out(file, fh, f);
if (!ret)
v4l_print_pix_fmt(vfd, &f->fmt.pix);
break;
case V4L2_BUF_TYPE_VIDEO_OUTPUT_OVERLAY:
+ CLEAR_AFTER_FIELD(f, fmt.win);
if (ops->vidioc_try_fmt_vid_out_overlay)
ret = ops->vidioc_try_fmt_vid_out_overlay(file,
fh, f);
break;
case V4L2_BUF_TYPE_VBI_CAPTURE:
+ CLEAR_AFTER_FIELD(f, fmt.vbi);
if (ops->vidioc_try_fmt_vbi_cap)
ret = ops->vidioc_try_fmt_vbi_cap(file, fh, f);
break;
case V4L2_BUF_TYPE_VBI_OUTPUT:
+ CLEAR_AFTER_FIELD(f, fmt.vbi);
if (ops->vidioc_try_fmt_vbi_out)
ret = ops->vidioc_try_fmt_vbi_out(file, fh, f);
break;
case V4L2_BUF_TYPE_SLICED_VBI_CAPTURE:
+ CLEAR_AFTER_FIELD(f, fmt.sliced);
if (ops->vidioc_try_fmt_sliced_vbi_cap)
ret = ops->vidioc_try_fmt_sliced_vbi_cap(file,
fh, f);
break;
case V4L2_BUF_TYPE_SLICED_VBI_OUTPUT:
+ CLEAR_AFTER_FIELD(f, fmt.sliced);
if (ops->vidioc_try_fmt_sliced_vbi_out)
ret = ops->vidioc_try_fmt_sliced_vbi_out(file,
fh, f);
break;
case V4L2_BUF_TYPE_PRIVATE:
+ /* CLEAR_AFTER_FIELD(f, fmt.raw_data); <- does nothing */
if (ops->vidioc_try_fmt_type_private)
ret = ops->vidioc_try_fmt_type_private(file,
fh, f);
@@ -898,6 +922,9 @@ static long __video_do_ioctl(struct file *file,
if (ret)
break;
+ if (p->type < V4L2_BUF_TYPE_PRIVATE)
+ CLEAR_AFTER_FIELD(p, memory);
+
ret = ops->vidioc_reqbufs(file, fh, p);
dbgarg(cmd, "count=%d, type=%s, memory=%s\n",
p->count,
diff --git a/drivers/media/video/zoran/zoran_driver.c b/drivers/media/video/zoran/zoran_driver.c
index 092333b1c34..643cccaa1aa 100644
--- a/drivers/media/video/zoran/zoran_driver.c
+++ b/drivers/media/video/zoran/zoran_driver.c
@@ -1863,22 +1863,20 @@ static int zoran_querycap(struct file *file, void *__fh, struct v4l2_capability
static int zoran_enum_fmt(struct zoran *zr, struct v4l2_fmtdesc *fmt, int flag)
{
- int num = -1, i;
-
- for (i = 0; i < NUM_FORMATS; i++) {
- if (zoran_formats[i].flags & flag)
- num++;
- if (num == fmt->index)
- break;
+ unsigned int num, i;
+
+ for (num = i = 0; i < NUM_FORMATS; i++) {
+ if (zoran_formats[i].flags & flag && num++ == fmt->index) {
+ strncpy(fmt->description, zoran_formats[i].name,
+ sizeof(fmt->description) - 1);
+ /* fmt struct pre-zeroed, so adding '\0' not neeed */
+ fmt->pixelformat = zoran_formats[i].fourcc;
+ if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED)
+ fmt->flags |= V4L2_FMT_FLAG_COMPRESSED;
+ return 0;
+ }
}
- if (fmt->index < 0 /* late, but not too late */ || i == NUM_FORMATS)
- return -EINVAL;
-
- strncpy(fmt->description, zoran_formats[i].name, sizeof(fmt->description)-1);
- fmt->pixelformat = zoran_formats[i].fourcc;
- if (zoran_formats[i].flags & ZORAN_FORMAT_COMPRESSED)
- fmt->flags |= V4L2_FMT_FLAG_COMPRESSED;
- return 0;
+ return -EINVAL;
}
static int zoran_enum_fmt_vid_cap(struct file *file, void *__fh,
diff --git a/drivers/mfd/pcf50633-core.c b/drivers/mfd/pcf50633-core.c
index 7793932a513..11a6248cc1c 100644
--- a/drivers/mfd/pcf50633-core.c
+++ b/drivers/mfd/pcf50633-core.c
@@ -443,7 +443,7 @@ static irqreturn_t pcf50633_irq(int irq, void *data)
dev_dbg(pcf->dev, "pcf50633_irq\n");
get_device(pcf->dev);
- disable_irq(pcf->irq);
+ disable_irq_nosync(pcf->irq);
schedule_work(&pcf->irq_work);
return IRQ_HANDLED;
diff --git a/drivers/mfd/wm8350-core.c b/drivers/mfd/wm8350-core.c
index c2be3088e2e..fe24079387c 100644
--- a/drivers/mfd/wm8350-core.c
+++ b/drivers/mfd/wm8350-core.c
@@ -79,10 +79,6 @@ static int wm8350_phys_read(struct wm8350 *wm8350, u8 reg, int num_regs,
/* Cache is CPU endian */
dest[i - reg] = be16_to_cpu(dest[i - reg]);
- /* Satisfy non-volatile bits from cache */
- dest[i - reg] &= wm8350_reg_io_map[i].vol;
- dest[i - reg] |= wm8350->reg_cache[i];
-
/* Mask out non-readable bits */
dest[i - reg] &= wm8350_reg_io_map[i].readable;
}
@@ -182,9 +178,6 @@ static int wm8350_write(struct wm8350 *wm8350, u8 reg, int num_regs, u16 *src)
(wm8350->reg_cache[i] & ~wm8350_reg_io_map[i].writable)
| src[i - reg];
- /* Don't store volatile bits */
- wm8350->reg_cache[i] &= ~wm8350_reg_io_map[i].vol;
-
src[i - reg] = cpu_to_be16(src[i - reg]);
}
@@ -1261,7 +1254,6 @@ static int wm8350_create_cache(struct wm8350 *wm8350, int type, int mode)
(i < WM8350_CLOCK_CONTROL_1 || i > WM8350_AIF_TEST)) {
value = be16_to_cpu(wm8350->reg_cache[i]);
value &= wm8350_reg_io_map[i].readable;
- value &= ~wm8350_reg_io_map[i].vol;
wm8350->reg_cache[i] = value;
} else
wm8350->reg_cache[i] = reg_map[i];
diff --git a/drivers/misc/enclosure.c b/drivers/misc/enclosure.c
index 3cf61ece71d..348443bdb23 100644
--- a/drivers/misc/enclosure.c
+++ b/drivers/misc/enclosure.c
@@ -119,7 +119,7 @@ enclosure_register(struct device *dev, const char *name, int components,
edev->edev.class = &enclosure_class;
edev->edev.parent = get_device(dev);
edev->cb = cb;
- dev_set_name(&edev->edev, name);
+ dev_set_name(&edev->edev, "%s", name);
err = device_register(&edev->edev);
if (err)
goto err;
@@ -255,8 +255,8 @@ enclosure_component_register(struct enclosure_device *edev,
ecomp->number = number;
cdev = &ecomp->cdev;
cdev->parent = get_device(&edev->edev);
- if (name)
- dev_set_name(cdev, name);
+ if (name && name[0])
+ dev_set_name(cdev, "%s", name);
else
dev_set_name(cdev, "%u", number);
diff --git a/drivers/misc/isl29003.c b/drivers/misc/isl29003.c
index 2e2a5923d4c..a71e245801e 100644
--- a/drivers/misc/isl29003.c
+++ b/drivers/misc/isl29003.c
@@ -64,6 +64,7 @@ struct isl29003_data {
struct i2c_client *client;
struct mutex lock;
u8 reg_cache[ISL29003_NUM_CACHABLE_REGS];
+ u8 power_state_before_suspend;
};
static int gain_range[] = {
@@ -411,6 +412,9 @@ static int __devexit isl29003_remove(struct i2c_client *client)
#ifdef CONFIG_PM
static int isl29003_suspend(struct i2c_client *client, pm_message_t mesg)
{
+ struct isl29003_data *data = i2c_get_clientdata(client);
+
+ data->power_state_before_suspend = isl29003_get_power_state(client);
return isl29003_set_power_state(client, 0);
}
@@ -421,10 +425,11 @@ static int isl29003_resume(struct i2c_client *client)
/* restore registers from cache */
for (i = 0; i < ARRAY_SIZE(data->reg_cache); i++)
- if (!i2c_smbus_write_byte_data(client, i, data->reg_cache[i]))
+ if (i2c_smbus_write_byte_data(client, i, data->reg_cache[i]))
return -EIO;
- return 0;
+ return isl29003_set_power_state(client,
+ data->power_state_before_suspend);
}
#else
diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c
index fe8041e619e..b25e9b6516a 100644
--- a/drivers/mmc/card/block.c
+++ b/drivers/mmc/card/block.c
@@ -254,6 +254,14 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req)
brq.data.blocks = req->nr_sectors;
/*
+ * The block layer doesn't support all sector count
+ * restrictions, so we need to be prepared for too big
+ * requests.
+ */
+ if (brq.data.blocks > card->host->max_blk_count)
+ brq.data.blocks = card->host->max_blk_count;
+
+ /*
* After a read error, we redo the request one sector at a time
* in order to accurately determine which sectors can be read
* successfully.
diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c
index fa073ab3fa3..26491173275 100644
--- a/drivers/mmc/core/core.c
+++ b/drivers/mmc/core/core.c
@@ -706,7 +706,7 @@ static void mmc_power_up(struct mmc_host *host)
* This delay should be sufficient to allow the power supply
* to reach the minimum voltage.
*/
- mmc_delay(2);
+ mmc_delay(10);
host->ios.clock = host->f_min;
host->ios.power_mode = MMC_POWER_ON;
@@ -716,7 +716,7 @@ static void mmc_power_up(struct mmc_host *host)
* This delay must be at least 74 clock sizes, or 1 ms, or the
* time required to reach a stable voltage.
*/
- mmc_delay(2);
+ mmc_delay(10);
}
static void mmc_power_off(struct mmc_host *host)
diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c
index a663429b3d5..7d4febdab28 100644
--- a/drivers/mmc/host/mmci.c
+++ b/drivers/mmc/host/mmci.c
@@ -490,7 +490,7 @@ static void mmci_check_status(unsigned long data)
mod_timer(&host->timer, jiffies + HZ);
}
-static int __devinit mmci_probe(struct amba_device *dev, void *id)
+static int __devinit mmci_probe(struct amba_device *dev, struct amba_id *id)
{
struct mmc_platform_data *plat = dev->dev.platform_data;
struct mmci_host *host;
@@ -514,6 +514,7 @@ static int __devinit mmci_probe(struct amba_device *dev, void *id)
}
host = mmc_priv(mmc);
+ host->mmc = mmc;
/* Bits 12 thru 19 is the designer */
host->hw_designer = (dev->periphid >> 12) & 0xff;
/* Bits 20 thru 23 is the revison */
@@ -545,7 +546,6 @@ static int __devinit mmci_probe(struct amba_device *dev, void *id)
host->mclk = clk_get_rate(host->clk);
DBG(host, "eventual mclk rate: %u Hz\n", host->mclk);
}
- host->mmc = mmc;
host->base = ioremap(dev->res.start, SZ_4K);
if (!host->base) {
ret = -ENOMEM;
diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c
index b5c375d94ab..c643d0fe118 100644
--- a/drivers/mmc/host/mvsdio.c
+++ b/drivers/mmc/host/mvsdio.c
@@ -825,24 +825,23 @@ static int __exit mvsd_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM
-static int mvsd_suspend(struct platform_device *dev, pm_message_t state,
- u32 level)
+static int mvsd_suspend(struct platform_device *dev, pm_message_t state)
{
struct mmc_host *mmc = platform_get_drvdata(dev);
int ret = 0;
- if (mmc && level == SUSPEND_DISABLE)
+ if (mmc)
ret = mmc_suspend_host(mmc, state);
return ret;
}
-static int mvsd_resume(struct platform_device *dev, u32 level)
+static int mvsd_resume(struct platform_device *dev)
{
- struct mmc_host *mmc = platform_dev_get_drvdata(dev);
+ struct mmc_host *mmc = platform_get_drvdata(dev);
int ret = 0;
- if (mmc && level == RESUME_ENABLE)
+ if (mmc)
ret = mmc_resume_host(mmc);
return ret;
diff --git a/drivers/mmc/host/omap.c b/drivers/mmc/host/omap.c
index 5570849188c..bfa25c01c87 100644
--- a/drivers/mmc/host/omap.c
+++ b/drivers/mmc/host/omap.c
@@ -157,8 +157,6 @@ struct mmc_omap_host {
struct timer_list dma_timer;
unsigned dma_len;
- short power_pin;
-
struct mmc_omap_slot *slots[OMAP_MMC_MAX_SLOTS];
struct mmc_omap_slot *current_slot;
spinlock_t slot_lock;
diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c
index cd37962ec44..65be27995d5 100644
--- a/drivers/mmc/host/sdhci-pci.c
+++ b/drivers/mmc/host/sdhci-pci.c
@@ -522,8 +522,8 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pci_slot));
if (IS_ERR(host)) {
- ret = PTR_ERR(host);
- goto unmap;
+ dev_err(&pdev->dev, "cannot allocate host\n");
+ return ERR_PTR(PTR_ERR(host));
}
slot = sdhci_priv(host);
@@ -541,7 +541,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot(
ret = pci_request_region(pdev, bar, mmc_hostname(host->mmc));
if (ret) {
dev_err(&pdev->dev, "cannot request region\n");
- return ERR_PTR(ret);
+ goto free;
}
addr = pci_resource_start(pdev, bar);
@@ -572,6 +572,8 @@ unmap:
release:
pci_release_region(pdev, bar);
+
+free:
sdhci_free_host(host);
return ERR_PTR(ret);
diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h
index f20a834f430..65c6f996bbd 100644
--- a/drivers/mmc/host/sdhci.h
+++ b/drivers/mmc/host/sdhci.h
@@ -125,7 +125,7 @@
#define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \
SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \
SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \
- SDHCI_INT_DATA_END_BIT)
+ SDHCI_INT_DATA_END_BIT | SDHCI_ADMA_ERROR)
#define SDHCI_INT_ALL_MASK ((unsigned int)-1)
#define SDHCI_ACMD12_ERR 0x3C
diff --git a/drivers/mtd/devices/m25p80.c b/drivers/mtd/devices/m25p80.c
index 8185b1f3e5e..cc6369ea67d 100644
--- a/drivers/mtd/devices/m25p80.c
+++ b/drivers/mtd/devices/m25p80.c
@@ -54,7 +54,7 @@
#define SR_SRWD 0x80 /* SR write protect */
/* Define max times to check status register before we give up. */
-#define MAX_READY_WAIT_COUNT 100000
+#define MAX_READY_WAIT_JIFFIES (10 * HZ) /* eg. M25P128 specs 6s max sector erase */
#define CMD_SIZE 4
#ifdef CONFIG_M25PXX_USE_FAST_READ
@@ -139,20 +139,20 @@ static inline int write_enable(struct m25p *flash)
*/
static int wait_till_ready(struct m25p *flash)
{
- int count;
+ unsigned long deadline;
int sr;
- /* one chip guarantees max 5 msec wait here after page writes,
- * but potentially three seconds (!) after page erase.
- */
- for (count = 0; count < MAX_READY_WAIT_COUNT; count++) {
+ deadline = jiffies + MAX_READY_WAIT_JIFFIES;
+
+ do {
if ((sr = read_sr(flash)) < 0)
break;
else if (!(sr & SR_WIP))
return 0;
- /* REVISIT sometimes sleeping would be best */
- }
+ cond_resched();
+
+ } while (!time_after_eq(jiffies, deadline));
return 1;
}
@@ -246,10 +246,12 @@ static int m25p80_erase(struct mtd_info *mtd, struct erase_info *instr)
mutex_lock(&flash->lock);
/* whole-chip erase? */
- if (len == flash->mtd.size && erase_chip(flash)) {
- instr->state = MTD_ERASE_FAILED;
- mutex_unlock(&flash->lock);
- return -EIO;
+ if (len == flash->mtd.size) {
+ if (erase_chip(flash)) {
+ instr->state = MTD_ERASE_FAILED;
+ mutex_unlock(&flash->lock);
+ return -EIO;
+ }
/* REVISIT in some cases we could speed up erasing large regions
* by using OPCODE_SE instead of OPCODE_BE_4K. We may have set up
diff --git a/drivers/mtd/devices/mtd_dataflash.c b/drivers/mtd/devices/mtd_dataflash.c
index 62dee54af0a..43976aa4dbb 100644
--- a/drivers/mtd/devices/mtd_dataflash.c
+++ b/drivers/mtd/devices/mtd_dataflash.c
@@ -178,7 +178,7 @@ static int dataflash_erase(struct mtd_info *mtd, struct erase_info *instr)
/* Calculate flash page address; use block erase (for speed) if
* we're at a block boundary and need to erase the whole block.
*/
- pageaddr = div_u64(instr->len, priv->page_size);
+ pageaddr = div_u64(instr->addr, priv->page_size);
do_block = (pageaddr & 0x7) == 0 && instr->len >= blocksize;
pageaddr = pageaddr << priv->page_offset;
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c
index fdd6ae85939..bccb4b1ffc4 100644
--- a/drivers/mtd/mtdcore.c
+++ b/drivers/mtd/mtdcore.c
@@ -48,11 +48,11 @@ static LIST_HEAD(mtd_notifiers);
*/
static void mtd_release(struct device *dev)
{
- struct mtd_info *mtd = dev_to_mtd(dev);
+ dev_t index = MTD_DEVT(dev_to_mtd(dev)->index);
/* remove /dev/mtdXro node if needed */
- if (MTD_DEVT(mtd->index))
- device_destroy(mtd_class, MTD_DEVT(mtd->index) + 1);
+ if (index)
+ device_destroy(mtd_class, index + 1);
}
static ssize_t mtd_type_show(struct device *dev,
@@ -132,6 +132,17 @@ static ssize_t mtd_writesize_show(struct device *dev,
}
static DEVICE_ATTR(writesize, S_IRUGO, mtd_writesize_show, NULL);
+static ssize_t mtd_subpagesize_show(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct mtd_info *mtd = dev_to_mtd(dev);
+ unsigned int subpagesize = mtd->writesize >> mtd->subpage_sft;
+
+ return snprintf(buf, PAGE_SIZE, "%u\n", subpagesize);
+
+}
+static DEVICE_ATTR(subpagesize, S_IRUGO, mtd_subpagesize_show, NULL);
+
static ssize_t mtd_oobsize_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
@@ -169,6 +180,7 @@ static struct attribute *mtd_attrs[] = {
&dev_attr_size.attr,
&dev_attr_erasesize.attr,
&dev_attr_writesize.attr,
+ &dev_attr_subpagesize.attr,
&dev_attr_oobsize.attr,
&dev_attr_numeraseregions.attr,
&dev_attr_name.attr,
diff --git a/drivers/mtd/mtdsuper.c b/drivers/mtd/mtdsuper.c
index 92285d0089c..af8b42e0a55 100644
--- a/drivers/mtd/mtdsuper.c
+++ b/drivers/mtd/mtdsuper.c
@@ -74,8 +74,7 @@ static int get_sb_mtd_aux(struct file_system_type *fs_type, int flags,
ret = fill_super(sb, data, flags & MS_SILENT ? 1 : 0);
if (ret < 0) {
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
return ret;
}
diff --git a/drivers/net/arm/ixp4xx_eth.c b/drivers/net/arm/ixp4xx_eth.c
index 448487e22fa..a740053d3af 100644
--- a/drivers/net/arm/ixp4xx_eth.c
+++ b/drivers/net/arm/ixp4xx_eth.c
@@ -338,12 +338,12 @@ static int ixp4xx_mdio_register(void)
if (cpu_is_ixp43x()) {
/* IXP43x lacks NPE-B and uses NPE-C for MII PHY access */
if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEC_ETH))
- return -ENOSYS;
+ return -ENODEV;
mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthC_BASE_VIRT;
} else {
/* All MII PHY accesses use NPE-B Ethernet registers */
if (!(ixp4xx_read_feature_bits() & IXP4XX_FEATURE_NPEB_ETH0))
- return -ENOSYS;
+ return -ENODEV;
mdio_regs = (struct eth_regs __iomem *)IXP4XX_EthB_BASE_VIRT;
}
@@ -1174,7 +1174,7 @@ static int __devinit eth_init_one(struct platform_device *pdev)
regs_phys = IXP4XX_EthC_BASE_PHYS;
break;
default:
- err = -ENOSYS;
+ err = -ENODEV;
goto err_free;
}
@@ -1189,15 +1189,10 @@ static int __devinit eth_init_one(struct platform_device *pdev)
goto err_free;
}
- if (register_netdev(dev)) {
- err = -EIO;
- goto err_npe_rel;
- }
-
port->mem_res = request_mem_region(regs_phys, REGS_SIZE, dev->name);
if (!port->mem_res) {
err = -EBUSY;
- goto err_unreg;
+ goto err_npe_rel;
}
port->plat = plat;
@@ -1215,20 +1210,25 @@ static int __devinit eth_init_one(struct platform_device *pdev)
snprintf(phy_id, BUS_ID_SIZE, PHY_ID_FMT, "0", plat->phy);
port->phydev = phy_connect(dev, phy_id, &ixp4xx_adjust_link, 0,
PHY_INTERFACE_MODE_MII);
- if (IS_ERR(port->phydev)) {
- printk(KERN_ERR "%s: Could not attach to PHY\n", dev->name);
- return PTR_ERR(port->phydev);
- }
+ if ((err = IS_ERR(port->phydev)))
+ goto err_free_mem;
port->phydev->irq = PHY_POLL;
+ if ((err = register_netdev(dev)))
+ goto err_phy_dis;
+
printk(KERN_INFO "%s: MII PHY %i on %s\n", dev->name, plat->phy,
npe_name(port->npe));
return 0;
-err_unreg:
- unregister_netdev(dev);
+err_phy_dis:
+ phy_disconnect(port->phydev);
+err_free_mem:
+ npe_port_tab[NPE_ID(port->id)] = NULL;
+ platform_set_drvdata(pdev, NULL);
+ release_resource(port->mem_res);
err_npe_rel:
npe_release(port->npe);
err_free:
@@ -1242,6 +1242,7 @@ static int __devexit eth_remove_one(struct platform_device *pdev)
struct port *port = netdev_priv(dev);
unregister_netdev(dev);
+ phy_disconnect(port->phydev);
npe_port_tab[NPE_ID(port->id)] = NULL;
platform_set_drvdata(pdev, NULL);
npe_release(port->npe);
diff --git a/drivers/net/benet/be.h b/drivers/net/benet/be.h
index c49ddd08b2a..b4bb06fdf30 100644
--- a/drivers/net/benet/be.h
+++ b/drivers/net/benet/be.h
@@ -35,8 +35,22 @@
#define DRV_VER "2.0.348"
#define DRV_NAME "be2net"
#define BE_NAME "ServerEngines BladeEngine2 10Gbps NIC"
+#define OC_NAME "Emulex OneConnect 10Gbps NIC"
#define DRV_DESC BE_NAME "Driver"
+#define BE_VENDOR_ID 0x19a2
+#define BE_DEVICE_ID1 0x211
+#define OC_DEVICE_ID1 0x700
+#define OC_DEVICE_ID2 0x701
+
+static inline char *nic_name(struct pci_dev *pdev)
+{
+ if (pdev->device == OC_DEVICE_ID1 || pdev->device == OC_DEVICE_ID2)
+ return OC_NAME;
+ else
+ return BE_NAME;
+}
+
/* Number of bytes of an RX frame that are copied to skb->data */
#define BE_HDR_LEN 64
#define BE_MAX_JUMBO_FRAME_SIZE 9018
diff --git a/drivers/net/benet/be_main.c b/drivers/net/benet/be_main.c
index 30d0c81c989..5c378b5e8e4 100644
--- a/drivers/net/benet/be_main.c
+++ b/drivers/net/benet/be_main.c
@@ -28,10 +28,10 @@ static unsigned int rx_frag_size = 2048;
module_param(rx_frag_size, uint, S_IRUGO);
MODULE_PARM_DESC(rx_frag_size, "Size of a fragment that holds rcvd data.");
-#define BE_VENDOR_ID 0x19a2
-#define BE2_DEVICE_ID_1 0x0211
static DEFINE_PCI_DEVICE_TABLE(be_dev_ids) = {
- { PCI_DEVICE(BE_VENDOR_ID, BE2_DEVICE_ID_1) },
+ { PCI_DEVICE(BE_VENDOR_ID, BE_DEVICE_ID1) },
+ { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID1) },
+ { PCI_DEVICE(BE_VENDOR_ID, OC_DEVICE_ID2) },
{ 0 }
};
MODULE_DEVICE_TABLE(pci, be_dev_ids);
@@ -1859,7 +1859,7 @@ static int __devinit be_probe(struct pci_dev *pdev,
if (status != 0)
goto stats_clean;
- dev_info(&pdev->dev, BE_NAME " port %d\n", adapter->port_num);
+ dev_info(&pdev->dev, "%s port %d\n", nic_name(pdev), adapter->port_num);
return 0;
stats_clean:
@@ -1873,7 +1873,7 @@ rel_reg:
disable_dev:
pci_disable_device(pdev);
do_none:
- dev_warn(&pdev->dev, BE_NAME " initialization failed\n");
+ dev_err(&pdev->dev, "%s initialization failed\n", nic_name(pdev));
return status;
}
diff --git a/drivers/net/bnx2.c b/drivers/net/bnx2.c
index d47839184a0..b0cb29d4cc0 100644
--- a/drivers/net/bnx2.c
+++ b/drivers/net/bnx2.c
@@ -54,8 +54,8 @@
#define DRV_MODULE_NAME "bnx2"
#define PFX DRV_MODULE_NAME ": "
-#define DRV_MODULE_VERSION "2.0.0"
-#define DRV_MODULE_RELDATE "April 2, 2009"
+#define DRV_MODULE_VERSION "2.0.1"
+#define DRV_MODULE_RELDATE "May 6, 2009"
#define FW_MIPS_FILE_06 "bnx2/bnx2-mips-06-4.6.16.fw"
#define FW_RV2P_FILE_06 "bnx2/bnx2-rv2p-06-4.6.16.fw"
#define FW_MIPS_FILE_09 "bnx2/bnx2-mips-09-4.6.17.fw"
@@ -2600,6 +2600,7 @@ bnx2_get_hw_tx_cons(struct bnx2_napi *bnapi)
/* Tell compiler that status block fields can change. */
barrier();
cons = *bnapi->hw_tx_cons_ptr;
+ barrier();
if (unlikely((cons & MAX_TX_DESC_CNT) == MAX_TX_DESC_CNT))
cons++;
return cons;
@@ -2879,6 +2880,7 @@ bnx2_get_hw_rx_cons(struct bnx2_napi *bnapi)
/* Tell compiler that status block fields can change. */
barrier();
cons = *bnapi->hw_rx_cons_ptr;
+ barrier();
if (unlikely((cons & MAX_RX_DESC_CNT) == MAX_RX_DESC_CNT))
cons++;
return cons;
diff --git a/drivers/net/bonding/bond_3ad.c b/drivers/net/bonding/bond_3ad.c
index 8c2e5ab51f0..faf094abef7 100644
--- a/drivers/net/bonding/bond_3ad.c
+++ b/drivers/net/bonding/bond_3ad.c
@@ -1465,6 +1465,12 @@ static struct aggregator *ad_agg_selection_test(struct aggregator *best,
return best;
}
+static int agg_device_up(const struct aggregator *agg)
+{
+ return (netif_running(agg->slave->dev) &&
+ netif_carrier_ok(agg->slave->dev));
+}
+
/**
* ad_agg_selection_logic - select an aggregation group for a team
* @aggregator: the aggregator we're looking at
@@ -1496,14 +1502,13 @@ static void ad_agg_selection_logic(struct aggregator *agg)
struct port *port;
origin = agg;
-
active = __get_active_agg(agg);
- best = active;
+ best = (active && agg_device_up(active)) ? active : NULL;
do {
agg->is_active = 0;
- if (agg->num_of_ports)
+ if (agg->num_of_ports && agg_device_up(agg))
best = ad_agg_selection_test(best, agg);
} while ((agg = __get_next_agg(agg)));
diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c
index 553a8991977..46d312bedfb 100644
--- a/drivers/net/bonding/bond_alb.c
+++ b/drivers/net/bonding/bond_alb.c
@@ -1706,10 +1706,8 @@ void bond_alb_handle_active_change(struct bonding *bond, struct slave *new_slave
* Called with RTNL
*/
int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr)
- __releases(&bond->curr_slave_lock)
- __releases(&bond->lock)
__acquires(&bond->lock)
- __acquires(&bond->curr_slave_lock)
+ __releases(&bond->lock)
{
struct bonding *bond = netdev_priv(bond_dev);
struct sockaddr *sa = addr;
@@ -1745,9 +1743,6 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr)
}
}
- write_unlock_bh(&bond->curr_slave_lock);
- read_unlock(&bond->lock);
-
if (swap_slave) {
alb_swap_mac_addr(bond, swap_slave, bond->curr_active_slave);
alb_fasten_mac_swap(bond, swap_slave, bond->curr_active_slave);
@@ -1755,16 +1750,15 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr)
alb_set_slave_mac_addr(bond->curr_active_slave, bond_dev->dev_addr,
bond->alb_info.rlb_enabled);
+ read_lock(&bond->lock);
alb_send_learning_packets(bond->curr_active_slave, bond_dev->dev_addr);
if (bond->alb_info.rlb_enabled) {
/* inform clients mac address has changed */
rlb_req_update_slave_clients(bond, bond->curr_active_slave);
}
+ read_unlock(&bond->lock);
}
- read_lock(&bond->lock);
- write_lock_bh(&bond->curr_slave_lock);
-
return 0;
}
diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c
index 63369b6b14d..74824028f85 100644
--- a/drivers/net/bonding/bond_main.c
+++ b/drivers/net/bonding/bond_main.c
@@ -2213,33 +2213,24 @@ static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *in
{
struct bonding *bond = netdev_priv(bond_dev);
struct slave *slave;
- int i, found = 0;
-
- if (info->slave_id < 0) {
- return -ENODEV;
- }
+ int i, res = -ENODEV;
read_lock(&bond->lock);
bond_for_each_slave(bond, slave, i) {
if (i == (int)info->slave_id) {
- found = 1;
+ res = 0;
+ strcpy(info->slave_name, slave->dev->name);
+ info->link = slave->link;
+ info->state = slave->state;
+ info->link_failure_count = slave->link_failure_count;
break;
}
}
read_unlock(&bond->lock);
- if (found) {
- strcpy(info->slave_name, slave->dev->name);
- info->link = slave->link;
- info->state = slave->state;
- info->link_failure_count = slave->link_failure_count;
- } else {
- return -ENODEV;
- }
-
- return 0;
+ return res;
}
/*-------------------------------- Monitoring -------------------------------*/
@@ -5167,16 +5158,15 @@ int bond_create(char *name, struct bond_params *params)
up_write(&bonding_rwsem);
rtnl_unlock(); /* allows sysfs registration of net device */
res = bond_create_sysfs_entry(netdev_priv(bond_dev));
- if (res < 0) {
- rtnl_lock();
- down_write(&bonding_rwsem);
- bond_deinit(bond_dev);
- unregister_netdevice(bond_dev);
- goto out_rtnl;
- }
+ if (res < 0)
+ goto out_unreg;
return 0;
+out_unreg:
+ rtnl_lock();
+ down_write(&bonding_rwsem);
+ unregister_netdevice(bond_dev);
out_bond:
bond_deinit(bond_dev);
out_netdev:
@@ -5191,7 +5181,6 @@ static int __init bonding_init(void)
{
int i;
int res;
- struct bonding *bond;
printk(KERN_INFO "%s", version);
@@ -5222,13 +5211,6 @@ static int __init bonding_init(void)
goto out;
err:
- list_for_each_entry(bond, &bond_dev_list, bond_list) {
- bond_work_cancel_all(bond);
- destroy_workqueue(bond->wq);
- }
-
- bond_destroy_sysfs();
-
rtnl_lock();
bond_free_all();
rtnl_unlock();
diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c
index e1bd690ff83..4f68aeb2679 100644
--- a/drivers/net/cxgb3/t3_hw.c
+++ b/drivers/net/cxgb3/t3_hw.c
@@ -3779,7 +3779,7 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai,
adapter->params.info = ai;
adapter->params.nports = ai->nports0 + ai->nports1;
- adapter->params.chan_map = !!ai->nports0 | (!!ai->nports1 << 1);
+ adapter->params.chan_map = (!!ai->nports0) | (!!ai->nports1 << 1);
adapter->params.rev = t3_read_reg(adapter, A_PL_REV);
/*
* We used to only run the "adapter check task" once a second if
diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c
index 6a46ceed943..b1419e21b46 100644
--- a/drivers/net/e1000/e1000_main.c
+++ b/drivers/net/e1000/e1000_main.c
@@ -3738,7 +3738,7 @@ static irqreturn_t e1000_intr(int irq, void *data)
struct e1000_hw *hw = &adapter->hw;
u32 rctl, icr = er32(ICR);
- if (unlikely((!icr) || test_bit(__E1000_RESETTING, &adapter->flags)))
+ if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags)))
return IRQ_NONE; /* Not our interrupt */
/* IMS will not auto-mask if INT_ASSERTED is not set, and if it is
diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h
index 6e317caf429..16a41389575 100644
--- a/drivers/net/ehea/ehea.h
+++ b/drivers/net/ehea/ehea.h
@@ -40,7 +40,7 @@
#include <asm/io.h>
#define DRV_NAME "ehea"
-#define DRV_VERSION "EHEA_0100"
+#define DRV_VERSION "EHEA_0101"
/* eHEA capability flags */
#define DLPAR_PORT_ADD_REM 1
diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c
index 604c844d076..b22dab9153f 100644
--- a/drivers/net/ehea/ehea_main.c
+++ b/drivers/net/ehea/ehea_main.c
@@ -545,14 +545,17 @@ static inline struct sk_buff *get_skb_by_index(struct sk_buff **skb_array,
x &= (arr_len - 1);
pref = skb_array[x];
- prefetchw(pref);
- prefetchw(pref + EHEA_CACHE_LINE);
-
- pref = (skb_array[x]->data);
- prefetch(pref);
- prefetch(pref + EHEA_CACHE_LINE);
- prefetch(pref + EHEA_CACHE_LINE * 2);
- prefetch(pref + EHEA_CACHE_LINE * 3);
+ if (pref) {
+ prefetchw(pref);
+ prefetchw(pref + EHEA_CACHE_LINE);
+
+ pref = (skb_array[x]->data);
+ prefetch(pref);
+ prefetch(pref + EHEA_CACHE_LINE);
+ prefetch(pref + EHEA_CACHE_LINE * 2);
+ prefetch(pref + EHEA_CACHE_LINE * 3);
+ }
+
skb = skb_array[skb_index];
skb_array[skb_index] = NULL;
return skb;
@@ -569,12 +572,14 @@ static inline struct sk_buff *get_skb_by_index_ll(struct sk_buff **skb_array,
x &= (arr_len - 1);
pref = skb_array[x];
- prefetchw(pref);
- prefetchw(pref + EHEA_CACHE_LINE);
+ if (pref) {
+ prefetchw(pref);
+ prefetchw(pref + EHEA_CACHE_LINE);
- pref = (skb_array[x]->data);
- prefetchw(pref);
- prefetchw(pref + EHEA_CACHE_LINE);
+ pref = (skb_array[x]->data);
+ prefetchw(pref);
+ prefetchw(pref + EHEA_CACHE_LINE);
+ }
skb = skb_array[wqe_index];
skb_array[wqe_index] = NULL;
diff --git a/drivers/net/igb/igb_main.c b/drivers/net/igb/igb_main.c
index 08c801490c7..e25343588fc 100644
--- a/drivers/net/igb/igb_main.c
+++ b/drivers/net/igb/igb_main.c
@@ -2006,7 +2006,7 @@ static void igb_setup_rctl(struct igb_adapter *adapter)
struct e1000_hw *hw = &adapter->hw;
u32 rctl;
u32 srrctl = 0;
- int i, j;
+ int i;
rctl = rd32(E1000_RCTL);
@@ -2071,8 +2071,6 @@ static void igb_setup_rctl(struct igb_adapter *adapter)
if (adapter->vfs_allocated_count) {
u32 vmolr;
- j = adapter->rx_ring[0].reg_idx;
-
/* set all queue drop enable bits */
wr32(E1000_QDE, ALL_QUEUES);
srrctl |= E1000_SRRCTL_DROP_EN;
@@ -2080,16 +2078,16 @@ static void igb_setup_rctl(struct igb_adapter *adapter)
/* disable queue 0 to prevent tail write w/o re-config */
wr32(E1000_RXDCTL(0), 0);
- vmolr = rd32(E1000_VMOLR(j));
+ vmolr = rd32(E1000_VMOLR(adapter->vfs_allocated_count));
if (rctl & E1000_RCTL_LPE)
vmolr |= E1000_VMOLR_LPE;
- if (adapter->num_rx_queues > 0)
+ if (adapter->num_rx_queues > 1)
vmolr |= E1000_VMOLR_RSSE;
- wr32(E1000_VMOLR(j), vmolr);
+ wr32(E1000_VMOLR(adapter->vfs_allocated_count), vmolr);
}
for (i = 0; i < adapter->num_rx_queues; i++) {
- j = adapter->rx_ring[i].reg_idx;
+ int j = adapter->rx_ring[i].reg_idx;
wr32(E1000_SRRCTL(j), srrctl);
}
diff --git a/drivers/net/meth.c b/drivers/net/meth.c
index aa08987f6e8..dbd3436912b 100644
--- a/drivers/net/meth.c
+++ b/drivers/net/meth.c
@@ -127,11 +127,11 @@ static unsigned long mdio_read(struct meth_private *priv, unsigned long phyreg)
static int mdio_probe(struct meth_private *priv)
{
int i;
- unsigned long p2, p3;
+ unsigned long p2, p3, flags;
/* check if phy is detected already */
if(priv->phy_addr>=0&&priv->phy_addr<32)
return 0;
- spin_lock(&priv->meth_lock);
+ spin_lock_irqsave(&priv->meth_lock, flags);
for (i=0;i<32;++i){
priv->phy_addr=i;
p2=mdio_read(priv,2);
@@ -157,7 +157,7 @@ static int mdio_probe(struct meth_private *priv)
break;
}
}
- spin_unlock(&priv->meth_lock);
+ spin_unlock_irqrestore(&priv->meth_lock, flags);
if(priv->phy_addr<32) {
return 0;
}
@@ -373,14 +373,14 @@ static int meth_release(struct net_device *dev)
static void meth_rx(struct net_device* dev, unsigned long int_status)
{
struct sk_buff *skb;
- unsigned long status;
+ unsigned long status, flags;
struct meth_private *priv = netdev_priv(dev);
unsigned long fifo_rptr = (int_status & METH_INT_RX_RPTR_MASK) >> 8;
- spin_lock(&priv->meth_lock);
+ spin_lock_irqsave(&priv->meth_lock, flags);
priv->dma_ctrl &= ~METH_DMA_RX_INT_EN;
mace->eth.dma_ctrl = priv->dma_ctrl;
- spin_unlock(&priv->meth_lock);
+ spin_unlock_irqrestore(&priv->meth_lock, flags);
if (int_status & METH_INT_RX_UNDERFLOW) {
fifo_rptr = (fifo_rptr - 1) & 0x0f;
@@ -452,12 +452,12 @@ static void meth_rx(struct net_device* dev, unsigned long int_status)
mace->eth.rx_fifo = priv->rx_ring_dmas[priv->rx_write];
ADVANCE_RX_PTR(priv->rx_write);
}
- spin_lock(&priv->meth_lock);
+ spin_lock_irqsave(&priv->meth_lock, flags);
/* In case there was underflow, and Rx DMA was disabled */
priv->dma_ctrl |= METH_DMA_RX_INT_EN | METH_DMA_RX_EN;
mace->eth.dma_ctrl = priv->dma_ctrl;
mace->eth.int_stat = METH_INT_RX_THRESHOLD;
- spin_unlock(&priv->meth_lock);
+ spin_unlock_irqrestore(&priv->meth_lock, flags);
}
static int meth_tx_full(struct net_device *dev)
@@ -470,11 +470,11 @@ static int meth_tx_full(struct net_device *dev)
static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status)
{
struct meth_private *priv = netdev_priv(dev);
- unsigned long status;
+ unsigned long status, flags;
struct sk_buff *skb;
unsigned long rptr = (int_status&TX_INFO_RPTR) >> 16;
- spin_lock(&priv->meth_lock);
+ spin_lock_irqsave(&priv->meth_lock, flags);
/* Stop DMA notification */
priv->dma_ctrl &= ~(METH_DMA_TX_INT_EN);
@@ -527,12 +527,13 @@ static void meth_tx_cleanup(struct net_device* dev, unsigned long int_status)
}
mace->eth.int_stat = METH_INT_TX_EMPTY | METH_INT_TX_PKT;
- spin_unlock(&priv->meth_lock);
+ spin_unlock_irqrestore(&priv->meth_lock, flags);
}
static void meth_error(struct net_device* dev, unsigned status)
{
struct meth_private *priv = netdev_priv(dev);
+ unsigned long flags;
printk(KERN_WARNING "meth: error status: 0x%08x\n",status);
/* check for errors too... */
@@ -547,7 +548,7 @@ static void meth_error(struct net_device* dev, unsigned status)
printk(KERN_WARNING "meth: Rx overflow\n");
if (status & (METH_INT_RX_UNDERFLOW)) {
printk(KERN_WARNING "meth: Rx underflow\n");
- spin_lock(&priv->meth_lock);
+ spin_lock_irqsave(&priv->meth_lock, flags);
mace->eth.int_stat = METH_INT_RX_UNDERFLOW;
/* more underflow interrupts will be delivered,
* effectively throwing us into an infinite loop.
@@ -555,7 +556,7 @@ static void meth_error(struct net_device* dev, unsigned status)
priv->dma_ctrl &= ~METH_DMA_RX_EN;
mace->eth.dma_ctrl = priv->dma_ctrl;
DPRINTK("Disabled meth Rx DMA temporarily\n");
- spin_unlock(&priv->meth_lock);
+ spin_unlock_irqrestore(&priv->meth_lock, flags);
}
mace->eth.int_stat = METH_INT_ERROR;
}
diff --git a/drivers/net/mlx4/en_cq.c b/drivers/net/mlx4/en_cq.c
index 91f50de84be..a276125b709 100644
--- a/drivers/net/mlx4/en_cq.c
+++ b/drivers/net/mlx4/en_cq.c
@@ -125,8 +125,10 @@ void mlx4_en_deactivate_cq(struct mlx4_en_priv *priv, struct mlx4_en_cq *cq)
if (cq->is_tx)
del_timer(&cq->timer);
- else
+ else {
napi_disable(&cq->napi);
+ netif_napi_del(&cq->napi);
+ }
mlx4_cq_free(mdev->dev, &cq->mcq);
}
diff --git a/drivers/net/mlx4/en_rx.c b/drivers/net/mlx4/en_rx.c
index 7942c4d3cd8..9ee873e872b 100644
--- a/drivers/net/mlx4/en_rx.c
+++ b/drivers/net/mlx4/en_rx.c
@@ -951,7 +951,6 @@ static int mlx4_en_config_rss_qp(struct mlx4_en_priv *priv,
if (err) {
mlx4_err(mdev, "Failed to allocate qp #%d\n", qpn);
goto out;
- return err;
}
qp->event = mlx4_en_sqp_event;
diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c
index b3185bf2c15..6bb5af35eda 100644
--- a/drivers/net/mv643xx_eth.c
+++ b/drivers/net/mv643xx_eth.c
@@ -393,12 +393,12 @@ struct mv643xx_eth_private {
struct work_struct tx_timeout_task;
struct napi_struct napi;
+ u8 oom;
u8 work_link;
u8 work_tx;
u8 work_tx_end;
u8 work_rx;
u8 work_rx_refill;
- u8 work_rx_oom;
int skb_size;
struct sk_buff_head rx_recycle;
@@ -569,7 +569,7 @@ static int rxq_process(struct rx_queue *rxq, int budget)
if (rxq->rx_curr_desc == rxq->rx_ring_size)
rxq->rx_curr_desc = 0;
- dma_unmap_single(NULL, rx_desc->buf_ptr,
+ dma_unmap_single(mp->dev->dev.parent, rx_desc->buf_ptr,
rx_desc->buf_size, DMA_FROM_DEVICE);
rxq->rx_desc_count--;
rx++;
@@ -661,7 +661,7 @@ static int rxq_refill(struct rx_queue *rxq, int budget)
dma_get_cache_alignment() - 1);
if (skb == NULL) {
- mp->work_rx_oom |= 1 << rxq->index;
+ mp->oom = 1;
goto oom;
}
@@ -678,8 +678,9 @@ static int rxq_refill(struct rx_queue *rxq, int budget)
rx_desc = rxq->rx_desc_area + rx;
- rx_desc->buf_ptr = dma_map_single(NULL, skb->data,
- mp->skb_size, DMA_FROM_DEVICE);
+ rx_desc->buf_ptr = dma_map_single(mp->dev->dev.parent,
+ skb->data, mp->skb_size,
+ DMA_FROM_DEVICE);
rx_desc->buf_size = mp->skb_size;
rxq->rx_skb[rx] = skb;
wmb();
@@ -718,6 +719,7 @@ static inline unsigned int has_tiny_unaligned_frags(struct sk_buff *skb)
static void txq_submit_frag_skb(struct tx_queue *txq, struct sk_buff *skb)
{
+ struct mv643xx_eth_private *mp = txq_to_mp(txq);
int nr_frags = skb_shinfo(skb)->nr_frags;
int frag;
@@ -746,10 +748,10 @@ static void txq_submit_frag_skb(struct tx_queue *txq, struct sk_buff *skb)
desc->l4i_chk = 0;
desc->byte_cnt = this_frag->size;
- desc->buf_ptr = dma_map_page(NULL, this_frag->page,
- this_frag->page_offset,
- this_frag->size,
- DMA_TO_DEVICE);
+ desc->buf_ptr = dma_map_page(mp->dev->dev.parent,
+ this_frag->page,
+ this_frag->page_offset,
+ this_frag->size, DMA_TO_DEVICE);
}
}
@@ -826,7 +828,8 @@ no_csum:
desc->l4i_chk = l4i_chk;
desc->byte_cnt = length;
- desc->buf_ptr = dma_map_single(NULL, skb->data, length, DMA_TO_DEVICE);
+ desc->buf_ptr = dma_map_single(mp->dev->dev.parent, skb->data,
+ length, DMA_TO_DEVICE);
__skb_queue_tail(&txq->tx_skb, skb);
@@ -956,10 +959,10 @@ static int txq_reclaim(struct tx_queue *txq, int budget, int force)
}
if (cmd_sts & TX_FIRST_DESC) {
- dma_unmap_single(NULL, desc->buf_ptr,
+ dma_unmap_single(mp->dev->dev.parent, desc->buf_ptr,
desc->byte_cnt, DMA_TO_DEVICE);
} else {
- dma_unmap_page(NULL, desc->buf_ptr,
+ dma_unmap_page(mp->dev->dev.parent, desc->buf_ptr,
desc->byte_cnt, DMA_TO_DEVICE);
}
@@ -1255,7 +1258,6 @@ static void mib_counters_update(struct mv643xx_eth_private *mp)
spin_lock_bh(&mp->mib_counters_lock);
p->good_octets_received += mib_read(mp, 0x00);
- p->good_octets_received += (u64)mib_read(mp, 0x04) << 32;
p->bad_octets_received += mib_read(mp, 0x08);
p->internal_mac_transmit_err += mib_read(mp, 0x0c);
p->good_frames_received += mib_read(mp, 0x10);
@@ -1269,7 +1271,6 @@ static void mib_counters_update(struct mv643xx_eth_private *mp)
p->frames_512_to_1023_octets += mib_read(mp, 0x30);
p->frames_1024_to_max_octets += mib_read(mp, 0x34);
p->good_octets_sent += mib_read(mp, 0x38);
- p->good_octets_sent += (u64)mib_read(mp, 0x3c) << 32;
p->good_frames_sent += mib_read(mp, 0x40);
p->excessive_collision += mib_read(mp, 0x44);
p->multicast_frames_sent += mib_read(mp, 0x48);
@@ -1896,9 +1897,9 @@ static int rxq_init(struct mv643xx_eth_private *mp, int index)
mp->rx_desc_sram_size);
rxq->rx_desc_dma = mp->rx_desc_sram_addr;
} else {
- rxq->rx_desc_area = dma_alloc_coherent(NULL, size,
- &rxq->rx_desc_dma,
- GFP_KERNEL);
+ rxq->rx_desc_area = dma_alloc_coherent(mp->dev->dev.parent,
+ size, &rxq->rx_desc_dma,
+ GFP_KERNEL);
}
if (rxq->rx_desc_area == NULL) {
@@ -1949,7 +1950,7 @@ out_free:
if (index == 0 && size <= mp->rx_desc_sram_size)
iounmap(rxq->rx_desc_area);
else
- dma_free_coherent(NULL, size,
+ dma_free_coherent(mp->dev->dev.parent, size,
rxq->rx_desc_area,
rxq->rx_desc_dma);
@@ -1981,7 +1982,7 @@ static void rxq_deinit(struct rx_queue *rxq)
rxq->rx_desc_area_size <= mp->rx_desc_sram_size)
iounmap(rxq->rx_desc_area);
else
- dma_free_coherent(NULL, rxq->rx_desc_area_size,
+ dma_free_coherent(mp->dev->dev.parent, rxq->rx_desc_area_size,
rxq->rx_desc_area, rxq->rx_desc_dma);
kfree(rxq->rx_skb);
@@ -2009,9 +2010,9 @@ static int txq_init(struct mv643xx_eth_private *mp, int index)
mp->tx_desc_sram_size);
txq->tx_desc_dma = mp->tx_desc_sram_addr;
} else {
- txq->tx_desc_area = dma_alloc_coherent(NULL, size,
- &txq->tx_desc_dma,
- GFP_KERNEL);
+ txq->tx_desc_area = dma_alloc_coherent(mp->dev->dev.parent,
+ size, &txq->tx_desc_dma,
+ GFP_KERNEL);
}
if (txq->tx_desc_area == NULL) {
@@ -2055,7 +2056,7 @@ static void txq_deinit(struct tx_queue *txq)
txq->tx_desc_area_size <= mp->tx_desc_sram_size)
iounmap(txq->tx_desc_area);
else
- dma_free_coherent(NULL, txq->tx_desc_area_size,
+ dma_free_coherent(mp->dev->dev.parent, txq->tx_desc_area_size,
txq->tx_desc_area, txq->tx_desc_dma);
}
@@ -2167,8 +2168,10 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget)
mp = container_of(napi, struct mv643xx_eth_private, napi);
- mp->work_rx_refill |= mp->work_rx_oom;
- mp->work_rx_oom = 0;
+ if (unlikely(mp->oom)) {
+ mp->oom = 0;
+ del_timer(&mp->rx_oom);
+ }
work_done = 0;
while (work_done < budget) {
@@ -2182,8 +2185,10 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget)
continue;
}
- queue_mask = mp->work_tx | mp->work_tx_end |
- mp->work_rx | mp->work_rx_refill;
+ queue_mask = mp->work_tx | mp->work_tx_end | mp->work_rx;
+ if (likely(!mp->oom))
+ queue_mask |= mp->work_rx_refill;
+
if (!queue_mask) {
if (mv643xx_eth_collect_events(mp))
continue;
@@ -2204,7 +2209,7 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget)
txq_maybe_wake(mp->txq + queue);
} else if (mp->work_rx & queue_mask) {
work_done += rxq_process(mp->rxq + queue, work_tbd);
- } else if (mp->work_rx_refill & queue_mask) {
+ } else if (!mp->oom && (mp->work_rx_refill & queue_mask)) {
work_done += rxq_refill(mp->rxq + queue, work_tbd);
} else {
BUG();
@@ -2212,7 +2217,7 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget)
}
if (work_done < budget) {
- if (mp->work_rx_oom)
+ if (mp->oom)
mod_timer(&mp->rx_oom, jiffies + (HZ / 10));
napi_complete(napi);
wrlp(mp, INT_MASK, INT_TX_END | INT_RX | INT_EXT);
@@ -2372,7 +2377,7 @@ static int mv643xx_eth_open(struct net_device *dev)
rxq_refill(mp->rxq + i, INT_MAX);
}
- if (mp->work_rx_oom) {
+ if (mp->oom) {
mp->rx_oom.expires = jiffies + (HZ / 10);
add_timer(&mp->rx_oom);
}
diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c
index eb66f658f9d..7d83896b8c2 100644
--- a/drivers/net/ne2k-pci.c
+++ b/drivers/net/ne2k-pci.c
@@ -374,18 +374,17 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev,
dev->ethtool_ops = &ne2k_pci_ethtool_ops;
NS8390_init(dev, 0);
+ memcpy(dev->dev_addr, SA_prom, 6);
+ memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
+
i = register_netdev(dev);
if (i)
goto err_out_free_netdev;
- for(i = 0; i < 6; i++)
- dev->dev_addr[i] = SA_prom[i];
printk("%s: %s found at %#lx, IRQ %d, %pM.\n",
dev->name, pci_clone_list[chip_idx].name, ioaddr, dev->irq,
dev->dev_addr);
- memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len);
-
return 0;
err_out_free_netdev:
diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c
index eceadf787a6..bf4af5248cb 100644
--- a/drivers/net/netconsole.c
+++ b/drivers/net/netconsole.c
@@ -664,7 +664,7 @@ static int netconsole_netdev_event(struct notifier_block *this,
struct netconsole_target *nt;
struct net_device *dev = ptr;
- if (!(event == NETDEV_CHANGENAME))
+ if (!(event == NETDEV_CHANGENAME || event == NETDEV_UNREGISTER))
goto done;
spin_lock_irqsave(&target_list_lock, flags);
@@ -675,6 +675,15 @@ static int netconsole_netdev_event(struct notifier_block *this,
case NETDEV_CHANGENAME:
strlcpy(nt->np.dev_name, dev->name, IFNAMSIZ);
break;
+ case NETDEV_UNREGISTER:
+ if (!nt->enabled)
+ break;
+ netpoll_cleanup(&nt->np);
+ nt->enabled = 0;
+ printk(KERN_INFO "netconsole: network logging stopped"
+ ", interface %s unregistered\n",
+ dev->name);
+ break;
}
}
netconsole_target_put(nt);
diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig
index 8ee21030e9a..dfc6cf765fb 100644
--- a/drivers/net/usb/Kconfig
+++ b/drivers/net/usb/Kconfig
@@ -180,6 +180,20 @@ config USB_NET_CDCETHER
IEEE 802 "local assignment" bit is set in the address, a "usbX"
name is used instead.
+config USB_NET_CDC_EEM
+ tristate "CDC EEM support"
+ depends on USB_USBNET && EXPERIMENTAL
+ help
+ This option supports devices conforming to the Communication Device
+ Class (CDC) Ethernet Emulation Model, a specification that's easy to
+ implement in device firmware. The CDC EEM specifications are available
+ from <http://www.usb.org/>.
+
+ This driver creates an interface named "ethX", where X depends on
+ what other networking devices you have in use. However, if the
+ IEEE 802 "local assignment" bit is set in the address, a "usbX"
+ name is used instead.
+
config USB_NET_DM9601
tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices"
depends on USB_USBNET
diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile
index 88a87eeb376..c8aef62cf2b 100644
--- a/drivers/net/usb/Makefile
+++ b/drivers/net/usb/Makefile
@@ -9,6 +9,7 @@ obj-$(CONFIG_USB_RTL8150) += rtl8150.o
obj-$(CONFIG_USB_HSO) += hso.o
obj-$(CONFIG_USB_NET_AX8817X) += asix.o
obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o
+obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o
obj-$(CONFIG_USB_NET_DM9601) += dm9601.o
obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o
obj-$(CONFIG_USB_NET_GL620A) += gl620a.o
diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c
new file mode 100644
index 00000000000..80e01778dd3
--- /dev/null
+++ b/drivers/net/usb/cdc_eem.c
@@ -0,0 +1,381 @@
+/*
+ * USB CDC EEM network interface driver
+ * Copyright (C) 2009 Oberthur Technologies
+ * by Omar Laazimani, Olivier Condemine
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; either version 2 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program; if not, write to the Free Software
+ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
+ */
+
+#include <linux/module.h>
+#include <linux/init.h>
+#include <linux/netdevice.h>
+#include <linux/etherdevice.h>
+#include <linux/ctype.h>
+#include <linux/ethtool.h>
+#include <linux/workqueue.h>
+#include <linux/mii.h>
+#include <linux/usb.h>
+#include <linux/crc32.h>
+#include <linux/usb/cdc.h>
+#include <linux/usb/usbnet.h>
+
+
+/*
+ * This driver is an implementation of the CDC "Ethernet Emulation
+ * Model" (EEM) specification, which encapsulates Ethernet frames
+ * for transport over USB using a simpler USB device model than the
+ * previous CDC "Ethernet Control Model" (ECM, or "CDC Ethernet").
+ *
+ * For details, see www.usb.org/developers/devclass_docs/CDC_EEM10.pdf
+ *
+ * This version has been tested with GIGAntIC WuaoW SIM Smart Card on 2.6.24,
+ * 2.6.27 and 2.6.30rc2 kernel.
+ * It has also been validated on Openmoko Om 2008.12 (based on 2.6.24 kernel).
+ * build on 23-April-2009
+ */
+
+#define EEM_HEAD 2 /* 2 byte header */
+
+/*-------------------------------------------------------------------------*/
+
+static void eem_linkcmd_complete(struct urb *urb)
+{
+ dev_kfree_skb(urb->context);
+ usb_free_urb(urb);
+}
+
+static void eem_linkcmd(struct usbnet *dev, struct sk_buff *skb)
+{
+ struct urb *urb;
+ int status;
+
+ urb = usb_alloc_urb(0, GFP_ATOMIC);
+ if (!urb)
+ goto fail;
+
+ usb_fill_bulk_urb(urb, dev->udev, dev->out,
+ skb->data, skb->len, eem_linkcmd_complete, skb);
+
+ status = usb_submit_urb(urb, GFP_ATOMIC);
+ if (status) {
+ usb_free_urb(urb);
+fail:
+ dev_kfree_skb(skb);
+ devwarn(dev, "link cmd failure\n");
+ return;
+ }
+}
+
+static int eem_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int status = 0;
+
+ status = usbnet_get_endpoints(dev, intf);
+ if (status < 0) {
+ usb_set_intfdata(intf, NULL);
+ usb_driver_release_interface(driver_of(intf), intf);
+ return status;
+ }
+
+ /* no jumbogram (16K) support for now */
+
+ dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN;
+
+ return 0;
+}
+
+/*
+ * EEM permits packing multiple Ethernet frames into USB transfers
+ * (a "bundle"), but for TX we don't try to do that.
+ */
+static struct sk_buff *eem_tx_fixup(struct usbnet *dev, struct sk_buff *skb,
+ gfp_t flags)
+{
+ struct sk_buff *skb2 = NULL;
+ u16 len = skb->len;
+ u32 crc = 0;
+ int padlen = 0;
+
+ /* When ((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket) is
+ * zero, stick two bytes of zero length EEM packet on the end.
+ * Else the framework would add invalid single byte padding,
+ * since it can't know whether ZLPs will be handled right by
+ * all the relevant hardware and software.
+ */
+ if (!((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket))
+ padlen += 2;
+
+ if (!skb_cloned(skb)) {
+ int headroom = skb_headroom(skb);
+ int tailroom = skb_tailroom(skb);
+
+ if ((tailroom >= ETH_FCS_LEN + padlen)
+ && (headroom >= EEM_HEAD))
+ goto done;
+
+ if ((headroom + tailroom)
+ > (EEM_HEAD + ETH_FCS_LEN + padlen)) {
+ skb->data = memmove(skb->head +
+ EEM_HEAD,
+ skb->data,
+ skb->len);
+ skb_set_tail_pointer(skb, len);
+ goto done;
+ }
+ }
+
+ skb2 = skb_copy_expand(skb, EEM_HEAD, ETH_FCS_LEN + padlen, flags);
+ if (!skb2)
+ return NULL;
+
+ dev_kfree_skb_any(skb);
+ skb = skb2;
+
+done:
+ /* we don't use the "no Ethernet CRC" option */
+ crc = crc32_le(~0, skb->data, skb->len);
+ crc = ~crc;
+
+ put_unaligned_le32(crc, skb_put(skb, 4));
+
+ /* EEM packet header format:
+ * b0..13: length of ethernet frame
+ * b14: bmCRC (1 == valid Ethernet CRC)
+ * b15: bmType (0 == data)
+ */
+ len = skb->len;
+ put_unaligned_le16(BIT(14) | len, skb_push(skb, 2));
+
+ /* Bundle a zero length EEM packet if needed */
+ if (padlen)
+ put_unaligned_le16(0, skb_put(skb, 2));
+
+ return skb;
+}
+
+static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb)
+{
+ /*
+ * Our task here is to strip off framing, leaving skb with one
+ * data frame for the usbnet framework code to process. But we
+ * may have received multiple EEM payloads, or command payloads.
+ * So we must process _everything_ as if it's a header, except
+ * maybe the last data payload
+ *
+ * REVISIT the framework needs updating so that when we consume
+ * all payloads (the last or only message was a command, or a
+ * zero length EEM packet) that is not accounted as an rx_error.
+ */
+ do {
+ struct sk_buff *skb2 = NULL;
+ u16 header;
+ u16 len = 0;
+
+ /* incomplete EEM header? */
+ if (skb->len < EEM_HEAD)
+ return 0;
+
+ /*
+ * EEM packet header format:
+ * b0..14: EEM type dependant (Data or Command)
+ * b15: bmType
+ */
+ header = get_unaligned_le16(skb->data);
+ skb_pull(skb, EEM_HEAD);
+
+ /*
+ * The bmType bit helps to denote when EEM
+ * packet is data or command :
+ * bmType = 0 : EEM data payload
+ * bmType = 1 : EEM (link) command
+ */
+ if (header & BIT(15)) {
+ u16 bmEEMCmd;
+
+ /*
+ * EEM (link) command packet:
+ * b0..10: bmEEMCmdParam
+ * b11..13: bmEEMCmd
+ * b14: bmReserved (must be 0)
+ * b15: 1 (EEM command)
+ */
+ if (header & BIT(14)) {
+ devdbg(dev, "reserved command %04x\n", header);
+ continue;
+ }
+
+ bmEEMCmd = (header >> 11) & 0x7;
+ switch (bmEEMCmd) {
+
+ /* Responding to echo requests is mandatory. */
+ case 0: /* Echo command */
+ len = header & 0x7FF;
+
+ /* bogus command? */
+ if (skb->len < len)
+ return 0;
+
+ skb2 = skb_clone(skb, GFP_ATOMIC);
+ if (unlikely(!skb2))
+ goto next;
+ skb_trim(skb2, len);
+ put_unaligned_le16(BIT(15) | (1 << 11) | len,
+ skb_push(skb2, 2));
+ eem_linkcmd(dev, skb2);
+ break;
+
+ /*
+ * Host may choose to ignore hints.
+ * - suspend: peripheral ready to suspend
+ * - response: suggest N millisec polling
+ * - response complete: suggest N sec polling
+ */
+ case 2: /* Suspend hint */
+ case 3: /* Response hint */
+ case 4: /* Response complete hint */
+ continue;
+
+ /*
+ * Hosts should never receive host-to-peripheral
+ * or reserved command codes; or responses to an
+ * echo command we didn't send.
+ */
+ case 1: /* Echo response */
+ case 5: /* Tickle */
+ default: /* reserved */
+ devwarn(dev, "unexpected link command %d\n",
+ bmEEMCmd);
+ continue;
+ }
+
+ } else {
+ u32 crc, crc2;
+ int is_last;
+
+ /* zero length EEM packet? */
+ if (header == 0)
+ continue;
+
+ /*
+ * EEM data packet header :
+ * b0..13: length of ethernet frame
+ * b14: bmCRC
+ * b15: 0 (EEM data)
+ */
+ len = header & 0x3FFF;
+
+ /* bogus EEM payload? */
+ if (skb->len < len)
+ return 0;
+
+ /* bogus ethernet frame? */
+ if (len < (ETH_HLEN + ETH_FCS_LEN))
+ goto next;
+
+ /*
+ * Treat the last payload differently: framework
+ * code expects our "fixup" to have stripped off
+ * headers, so "skb" is a data packet (or error).
+ * Else if it's not the last payload, keep "skb"
+ * for further processing.
+ */
+ is_last = (len == skb->len);
+ if (is_last)
+ skb2 = skb;
+ else {
+ skb2 = skb_clone(skb, GFP_ATOMIC);
+ if (unlikely(!skb2))
+ return 0;
+ }
+
+ crc = get_unaligned_le32(skb2->data
+ + len - ETH_FCS_LEN);
+ skb_trim(skb2, len - ETH_FCS_LEN);
+
+ /*
+ * The bmCRC helps to denote when the CRC field in
+ * the Ethernet frame contains a calculated CRC:
+ * bmCRC = 1 : CRC is calculated
+ * bmCRC = 0 : CRC = 0xDEADBEEF
+ */
+ if (header & BIT(14))
+ crc2 = ~crc32_le(~0, skb2->data, len);
+ else
+ crc2 = 0xdeadbeef;
+
+ if (is_last)
+ return crc == crc2;
+
+ if (unlikely(crc != crc2)) {
+ dev->stats.rx_errors++;
+ dev_kfree_skb_any(skb2);
+ } else
+ usbnet_skb_return(dev, skb2);
+ }
+
+next:
+ skb_pull(skb, len);
+ } while (skb->len);
+
+ return 1;
+}
+
+static const struct driver_info eem_info = {
+ .description = "CDC EEM Device",
+ .flags = FLAG_ETHER,
+ .bind = eem_bind,
+ .rx_fixup = eem_rx_fixup,
+ .tx_fixup = eem_tx_fixup,
+};
+
+/*-------------------------------------------------------------------------*/
+
+static const struct usb_device_id products[] = {
+{
+ USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_EEM,
+ USB_CDC_PROTO_EEM),
+ .driver_info = (unsigned long) &eem_info,
+},
+{
+ /* EMPTY == end of list */
+},
+};
+MODULE_DEVICE_TABLE(usb, products);
+
+static struct usb_driver eem_driver = {
+ .name = "cdc_eem",
+ .id_table = products,
+ .probe = usbnet_probe,
+ .disconnect = usbnet_disconnect,
+ .suspend = usbnet_suspend,
+ .resume = usbnet_resume,
+};
+
+
+static int __init eem_init(void)
+{
+ return usb_register(&eem_driver);
+}
+module_init(eem_init);
+
+static void __exit eem_exit(void)
+{
+ usb_deregister(&eem_driver);
+}
+module_exit(eem_exit);
+
+MODULE_AUTHOR("Omar Laazimani <omar.oberthur@gmail.com>");
+MODULE_DESCRIPTION("USB CDC EEM");
+MODULE_LICENSE("GPL");
diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c
index dc166532659..5a7283372b5 100644
--- a/drivers/net/usb/smsc95xx.c
+++ b/drivers/net/usb/smsc95xx.c
@@ -941,6 +941,16 @@ static int smsc95xx_reset(struct usbnet *dev)
if (netif_msg_ifup(dev))
devdbg(dev, "ID_REV = 0x%08x", read_buf);
+ /* Configure GPIO pins as LED outputs */
+ write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED |
+ LED_GPIO_CFG_FDX_LED;
+ ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf);
+ if (ret < 0) {
+ devwarn(dev, "Failed to write LED_GPIO_CFG register, ret=%d",
+ ret);
+ return ret;
+ }
+
/* Init Tx */
write_buf = 0;
ret = smsc95xx_write_reg(dev, FLOW, write_buf);
@@ -1231,6 +1241,11 @@ static const struct usb_device_id products[] = {
USB_DEVICE(0x0424, 0x9500),
.driver_info = (unsigned long) &smsc95xx_info,
},
+ {
+ /* SMSC9512/9514 USB Hub & Ethernet Device */
+ USB_DEVICE(0x0424, 0xec00),
+ .driver_info = (unsigned long) &smsc95xx_info,
+ },
{ }, /* END */
};
MODULE_DEVICE_TABLE(usb, products);
diff --git a/drivers/net/usb/smsc95xx.h b/drivers/net/usb/smsc95xx.h
index 66b5c84f302..86bc44977fb 100644
--- a/drivers/net/usb/smsc95xx.h
+++ b/drivers/net/usb/smsc95xx.h
@@ -99,6 +99,9 @@
#define PM_CTL_WUPS_MULTI_ (0x00000003)
#define LED_GPIO_CFG (0x24)
+#define LED_GPIO_CFG_SPD_LED (0x01000000)
+#define LED_GPIO_CFG_LNK_LED (0x00100000)
+#define LED_GPIO_CFG_FDX_LED (0x00010000)
#define GPIO_CFG (0x28)
diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c
index 9c82a39497e..4d1d47953fc 100644
--- a/drivers/net/virtio_net.c
+++ b/drivers/net/virtio_net.c
@@ -616,10 +616,11 @@ static int virtnet_open(struct net_device *dev)
static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd,
struct scatterlist *data, int out, int in)
{
- struct scatterlist sg[VIRTNET_SEND_COMMAND_SG_MAX + 2];
+ struct scatterlist *s, sg[VIRTNET_SEND_COMMAND_SG_MAX + 2];
struct virtio_net_ctrl_hdr ctrl;
virtio_net_ctrl_ack status = ~0;
unsigned int tmp;
+ int i;
if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)) {
BUG(); /* Caller should know better */
@@ -637,7 +638,8 @@ static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd,
sg_init_table(sg, out + in);
sg_set_buf(&sg[0], &ctrl, sizeof(ctrl));
- memcpy(&sg[1], data, sizeof(struct scatterlist) * (out + in - 2));
+ for_each_sg(data, s, out + in - 2, i)
+ sg_set_buf(&sg[i + 1], sg_virt(s), s->length);
sg_set_buf(&sg[out + in - 1], &status, sizeof(status));
if (vi->cvq->vq_ops->add_buf(vi->cvq, sg, out, in, vi) != 0)
@@ -692,7 +694,7 @@ static void virtnet_set_rx_mode(struct net_device *dev)
promisc = ((dev->flags & IFF_PROMISC) != 0);
allmulti = ((dev->flags & IFF_ALLMULTI) != 0);
- sg_set_buf(sg, &promisc, sizeof(promisc));
+ sg_init_one(sg, &promisc, sizeof(promisc));
if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX,
VIRTIO_NET_CTRL_RX_PROMISC,
@@ -700,7 +702,7 @@ static void virtnet_set_rx_mode(struct net_device *dev)
dev_warn(&dev->dev, "Failed to %sable promisc mode.\n",
promisc ? "en" : "dis");
- sg_set_buf(sg, &allmulti, sizeof(allmulti));
+ sg_init_one(sg, &allmulti, sizeof(allmulti));
if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX,
VIRTIO_NET_CTRL_RX_ALLMULTI,
@@ -716,6 +718,8 @@ static void virtnet_set_rx_mode(struct net_device *dev)
return;
}
+ sg_init_table(sg, 2);
+
/* Store the unicast list and count in the front of the buffer */
mac_data->entries = dev->uc_count;
addr = dev->uc_list;
@@ -744,24 +748,24 @@ static void virtnet_set_rx_mode(struct net_device *dev)
kfree(buf);
}
-static void virnet_vlan_rx_add_vid(struct net_device *dev, u16 vid)
+static void virtnet_vlan_rx_add_vid(struct net_device *dev, u16 vid)
{
struct virtnet_info *vi = netdev_priv(dev);
struct scatterlist sg;
- sg_set_buf(&sg, &vid, sizeof(vid));
+ sg_init_one(&sg, &vid, sizeof(vid));
if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN,
VIRTIO_NET_CTRL_VLAN_ADD, &sg, 1, 0))
dev_warn(&dev->dev, "Failed to add VLAN ID %d.\n", vid);
}
-static void virnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid)
+static void virtnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid)
{
struct virtnet_info *vi = netdev_priv(dev);
struct scatterlist sg;
- sg_set_buf(&sg, &vid, sizeof(vid));
+ sg_init_one(&sg, &vid, sizeof(vid));
if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN,
VIRTIO_NET_CTRL_VLAN_DEL, &sg, 1, 0))
@@ -794,8 +798,8 @@ static const struct net_device_ops virtnet_netdev = {
.ndo_set_mac_address = virtnet_set_mac_address,
.ndo_set_rx_mode = virtnet_set_rx_mode,
.ndo_change_mtu = virtnet_change_mtu,
- .ndo_vlan_rx_add_vid = virnet_vlan_rx_add_vid,
- .ndo_vlan_rx_kill_vid = virnet_vlan_rx_kill_vid,
+ .ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid,
+ .ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = virtnet_netpoll,
#endif
diff --git a/drivers/net/vxge/vxge-traffic.c b/drivers/net/vxge/vxge-traffic.c
index 7be0ae10d69..c2eeac4125f 100644
--- a/drivers/net/vxge/vxge-traffic.c
+++ b/drivers/net/vxge/vxge-traffic.c
@@ -115,7 +115,7 @@ enum vxge_hw_status vxge_hw_vpath_intr_enable(struct __vxge_hw_vpath_handle *vp)
VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_POISON|
VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO2_POISON|
VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_DMA_ERR|
- VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO1_DMA_ERR), 0, 32),
+ VXGE_HW_KDFCCTL_ERRORS_REG_KDFCCTL_FIFO2_DMA_ERR), 0, 32),
&vp_reg->kdfcctl_errors_mask);
__vxge_hw_pio_mem_write32_upper(0, &vp_reg->vpath_ppif_int_mask);
diff --git a/drivers/net/wan/ixp4xx_hss.c b/drivers/net/wan/ixp4xx_hss.c
index 3bf7d3f447d..765a7f5d6aa 100644
--- a/drivers/net/wan/ixp4xx_hss.c
+++ b/drivers/net/wan/ixp4xx_hss.c
@@ -1249,7 +1249,7 @@ static int __devinit hss_init_one(struct platform_device *pdev)
return -ENOMEM;
if ((port->npe = npe_request(0)) == NULL) {
- err = -ENOSYS;
+ err = -ENODEV;
goto err_free;
}
@@ -1311,7 +1311,7 @@ static int __init hss_init_module(void)
if ((ixp4xx_read_feature_bits() &
(IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS)) !=
(IXP4XX_FEATURE_HDLC | IXP4XX_FEATURE_HSS))
- return -ENOSYS;
+ return -ENODEV;
spin_lock_init(&npe_lock);
diff --git a/drivers/net/wimax/i2400m/rx.c b/drivers/net/wimax/i2400m/rx.c
index 02419bfd64b..f9fc3890232 100644
--- a/drivers/net/wimax/i2400m/rx.c
+++ b/drivers/net/wimax/i2400m/rx.c
@@ -819,10 +819,9 @@ void i2400m_roq_queue_update_ws(struct i2400m *i2400m, struct i2400m_roq *roq,
roq_data = (struct i2400m_roq_data *) &skb->cb;
i2400m_net_erx(i2400m, skb, roq_data->cs);
}
- else {
+ else
__i2400m_roq_queue(i2400m, roq, skb, sn, nsn);
- __i2400m_roq_update_ws(i2400m, roq, sn + 1);
- }
+ __i2400m_roq_update_ws(i2400m, roq, sn + 1);
i2400m_roq_log_add(i2400m, roq, I2400M_RO_TYPE_PACKET_WS,
old_ws, len, sn, nsn, roq->ws);
}
diff --git a/drivers/net/wireless/airo.c b/drivers/net/wireless/airo.c
index c36d3a3d655..d7347573912 100644
--- a/drivers/net/wireless/airo.c
+++ b/drivers/net/wireless/airo.c
@@ -6501,7 +6501,10 @@ static int airo_get_encode(struct net_device *dev,
/* Copy the key to the user buffer */
dwrq->length = get_wep_key(local, index, &buf[0], sizeof(buf));
- memcpy(extra, buf, dwrq->length);
+ if (dwrq->length != -1)
+ memcpy(extra, buf, dwrq->length);
+ else
+ dwrq->length = 0;
return 0;
}
@@ -6659,7 +6662,10 @@ static int airo_get_encodeext(struct net_device *dev,
/* Copy the key to the user buffer */
ext->key_len = get_wep_key(local, idx, &buf[0], sizeof(buf));
- memcpy(extra, buf, ext->key_len);
+ if (ext->key_len != -1)
+ memcpy(extra, buf, ext->key_len);
+ else
+ ext->key_len = 0;
return 0;
}
diff --git a/drivers/net/wireless/ath5k/base.c b/drivers/net/wireless/ath5k/base.c
index a08bc8a4fb6..32df27a9c7a 100644
--- a/drivers/net/wireless/ath5k/base.c
+++ b/drivers/net/wireless/ath5k/base.c
@@ -214,7 +214,7 @@ static struct pci_driver ath5k_pci_driver = {
* Prototypes - MAC 802.11 stack related functions
*/
static int ath5k_tx(struct ieee80211_hw *hw, struct sk_buff *skb);
-static int ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel);
+static int ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan);
static int ath5k_reset_wake(struct ath5k_softc *sc);
static int ath5k_start(struct ieee80211_hw *hw);
static void ath5k_stop(struct ieee80211_hw *hw);
@@ -1038,16 +1038,13 @@ ath5k_chan_set(struct ath5k_softc *sc, struct ieee80211_channel *chan)
if (chan->center_freq != sc->curchan->center_freq ||
chan->hw_value != sc->curchan->hw_value) {
- sc->curchan = chan;
- sc->curband = &sc->sbands[chan->band];
-
/*
* To switch channels clear any pending DMA operations;
* wait long enough for the RX fifo to drain, reset the
* hardware at the new frequency, and then re-enable
* the relevant bits of the h/w.
*/
- return ath5k_reset(sc, true, true);
+ return ath5k_reset(sc, chan);
}
return 0;
@@ -2314,7 +2311,7 @@ ath5k_init(struct ath5k_softc *sc)
sc->imask = AR5K_INT_RXOK | AR5K_INT_RXERR | AR5K_INT_RXEOL |
AR5K_INT_RXORN | AR5K_INT_TXDESC | AR5K_INT_TXEOL |
AR5K_INT_FATAL | AR5K_INT_GLOBAL;
- ret = ath5k_reset(sc, false, false);
+ ret = ath5k_reset(sc, NULL);
if (ret)
goto done;
@@ -2599,18 +2596,25 @@ drop_packet:
return NETDEV_TX_OK;
}
+/*
+ * Reset the hardware. If chan is not NULL, then also pause rx/tx
+ * and change to the given channel.
+ */
static int
-ath5k_reset(struct ath5k_softc *sc, bool stop, bool change_channel)
+ath5k_reset(struct ath5k_softc *sc, struct ieee80211_channel *chan)
{
struct ath5k_hw *ah = sc->ah;
int ret;
ATH5K_DBG(sc, ATH5K_DEBUG_RESET, "resetting\n");
- if (stop) {
+ if (chan) {
ath5k_hw_set_imr(ah, 0);
ath5k_txq_cleanup(sc);
ath5k_rx_stop(sc);
+
+ sc->curchan = chan;
+ sc->curband = &sc->sbands[chan->band];
}
ret = ath5k_hw_reset(ah, sc->opmode, sc->curchan, true);
if (ret) {
@@ -2648,7 +2652,7 @@ ath5k_reset_wake(struct ath5k_softc *sc)
{
int ret;
- ret = ath5k_reset(sc, true, true);
+ ret = ath5k_reset(sc, sc->curchan);
if (!ret)
ieee80211_wake_queues(sc->hw);
diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c
index 9770bb3d40f..4904a07e4b5 100644
--- a/drivers/net/wireless/ath5k/debug.c
+++ b/drivers/net/wireless/ath5k/debug.c
@@ -424,7 +424,7 @@ ath5k_debug_dump_bands(struct ath5k_softc *sc)
for (b = 0; b < IEEE80211_NUM_BANDS; b++) {
struct ieee80211_supported_band *band = &sc->sbands[b];
- char bname[5];
+ char bname[6];
switch (band->band) {
case IEEE80211_BAND_2GHZ:
strcpy(bname, "2 GHz");
diff --git a/drivers/net/wireless/iwlwifi/iwl-6000.c b/drivers/net/wireless/iwlwifi/iwl-6000.c
index edfa5e149f7..bd438d8acf5 100644
--- a/drivers/net/wireless/iwlwifi/iwl-6000.c
+++ b/drivers/net/wireless/iwlwifi/iwl-6000.c
@@ -101,8 +101,8 @@ struct iwl_cfg iwl6000_2agn_cfg = {
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
- .valid_tx_ant = ANT_BC,
- .valid_rx_ant = ANT_BC,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
.need_pll_cfg = false,
};
@@ -117,8 +117,8 @@ struct iwl_cfg iwl6050_2agn_cfg = {
.eeprom_ver = EEPROM_5000_EEPROM_VERSION,
.eeprom_calib_ver = EEPROM_5000_TX_POWER_VERSION,
.mod_params = &iwl50_mod_params,
- .valid_tx_ant = ANT_BC,
- .valid_rx_ant = ANT_BC,
+ .valid_tx_ant = ANT_AB,
+ .valid_rx_ant = ANT_AB,
.need_pll_cfg = false,
};
diff --git a/drivers/net/wireless/iwlwifi/iwl-agn.c b/drivers/net/wireless/iwlwifi/iwl-agn.c
index 1ef4192207a..3bb28db4a40 100644
--- a/drivers/net/wireless/iwlwifi/iwl-agn.c
+++ b/drivers/net/wireless/iwlwifi/iwl-agn.c
@@ -3636,7 +3636,9 @@ static struct pci_device_id iwl_hw_card_ids[] = {
{IWL_PCI_DEVICE(0x0085, 0x1112, iwl6000_2ag_cfg)},
{IWL_PCI_DEVICE(0x0082, 0x1122, iwl6000_2ag_cfg)},
{IWL_PCI_DEVICE(0x422B, PCI_ANY_ID, iwl6000_3agn_cfg)},
+ {IWL_PCI_DEVICE(0x422C, PCI_ANY_ID, iwl6000_2agn_cfg)},
{IWL_PCI_DEVICE(0x4238, PCI_ANY_ID, iwl6000_3agn_cfg)},
+ {IWL_PCI_DEVICE(0x4239, PCI_ANY_ID, iwl6000_2agn_cfg)},
{IWL_PCI_DEVICE(0x0082, PCI_ANY_ID, iwl6000_2agn_cfg)},
{IWL_PCI_DEVICE(0x0085, PCI_ANY_ID, iwl6000_3agn_cfg)},
{IWL_PCI_DEVICE(0x0086, PCI_ANY_ID, iwl6050_3agn_cfg)},
diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c
index 23644cf884f..e7c65c4f741 100644
--- a/drivers/net/wireless/iwlwifi/iwl-scan.c
+++ b/drivers/net/wireless/iwlwifi/iwl-scan.c
@@ -925,11 +925,11 @@ void iwl_bg_scan_completed(struct work_struct *work)
IWL_DEBUG_SCAN(priv, "SCAN complete scan\n");
+ ieee80211_scan_completed(priv->hw, false);
+
if (test_bit(STATUS_EXIT_PENDING, &priv->status))
return;
- ieee80211_scan_completed(priv->hw, false);
-
/* Since setting the TXPOWER may have been deferred while
* performing the scan, fire one off */
mutex_lock(&priv->mutex);
diff --git a/drivers/net/wireless/iwlwifi/iwl-sta.c b/drivers/net/wireless/iwlwifi/iwl-sta.c
index 5798fe49c77..44ab03a12e4 100644
--- a/drivers/net/wireless/iwlwifi/iwl-sta.c
+++ b/drivers/net/wireless/iwlwifi/iwl-sta.c
@@ -719,6 +719,14 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv,
{
unsigned long flags;
int ret = 0;
+ __le16 key_flags = 0;
+
+ key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK);
+ key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
+ key_flags &= ~STA_KEY_FLG_INVALID;
+
+ if (sta_id == priv->hw_params.bcast_sta_id)
+ key_flags |= STA_KEY_MULTICAST_MSK;
keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_IV;
keyconf->flags |= IEEE80211_KEY_FLAG_GENERATE_MMIC;
@@ -738,6 +746,9 @@ static int iwl_set_tkip_dynamic_key_info(struct iwl_priv *priv,
WARN(priv->stations[sta_id].sta.key.key_offset == WEP_INVALID_OFFSET,
"no space for a new key");
+ priv->stations[sta_id].sta.key.key_flags = key_flags;
+
+
/* This copy is acutally not needed: we get the key with each TX */
memcpy(priv->stations[sta_id].keyinfo.key, keyconf->key, 16);
@@ -754,9 +765,7 @@ void iwl_update_tkip_key(struct iwl_priv *priv,
{
u8 sta_id = IWL_INVALID_STATION;
unsigned long flags;
- __le16 key_flags = 0;
int i;
- DECLARE_MAC_BUF(mac);
sta_id = iwl_find_station(priv, addr);
if (sta_id == IWL_INVALID_STATION) {
@@ -771,16 +780,8 @@ void iwl_update_tkip_key(struct iwl_priv *priv,
return;
}
- key_flags |= (STA_KEY_FLG_TKIP | STA_KEY_FLG_MAP_KEY_MSK);
- key_flags |= cpu_to_le16(keyconf->keyidx << STA_KEY_FLG_KEYID_POS);
- key_flags &= ~STA_KEY_FLG_INVALID;
-
- if (sta_id == priv->hw_params.bcast_sta_id)
- key_flags |= STA_KEY_MULTICAST_MSK;
-
spin_lock_irqsave(&priv->sta_lock, flags);
- priv->stations[sta_id].sta.key.key_flags = key_flags;
priv->stations[sta_id].sta.key.tkip_rx_tsc_byte2 = (u8) iv32;
for (i = 0; i < 5; i++)
diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c
index 617c4235d97..4cce6613350 100644
--- a/drivers/net/wireless/iwlwifi/iwl3945-base.c
+++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c
@@ -1694,7 +1694,6 @@ void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq)
rxq->free_count = 0;
spin_unlock_irqrestore(&rxq->lock, flags);
}
-EXPORT_SYMBOL(iwl3945_rx_queue_reset);
/*
* this should be called while priv->lock is locked
@@ -1745,7 +1744,6 @@ static void iwl3945_rx_queue_free(struct iwl_priv *priv, struct iwl_rx_queue *rx
rxq->bd = NULL;
rxq->rb_stts = NULL;
}
-EXPORT_SYMBOL(iwl3945_rx_queue_free);
/* Convert linear signal-to-noise ratio into dB */
diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c
index db91db77650..bebf735cd4b 100644
--- a/drivers/net/wireless/rndis_wlan.c
+++ b/drivers/net/wireless/rndis_wlan.c
@@ -2558,6 +2558,11 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf)
mutex_init(&priv->command_lock);
spin_lock_init(&priv->stats_lock);
+ /* because rndis_command() sleeps we need to use workqueue */
+ priv->workqueue = create_singlethread_workqueue("rndis_wlan");
+ INIT_WORK(&priv->work, rndis_wext_worker);
+ INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats);
+
/* try bind rndis_host */
retval = generic_rndis_bind(usbdev, intf, FLAG_RNDIS_PHYM_WIRELESS);
if (retval < 0)
@@ -2603,16 +2608,17 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf)
disassociate(usbdev, 1);
netif_carrier_off(usbdev->net);
- /* because rndis_command() sleeps we need to use workqueue */
- priv->workqueue = create_singlethread_workqueue("rndis_wlan");
- INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats);
queue_delayed_work(priv->workqueue, &priv->stats_work,
round_jiffies_relative(STATS_UPDATE_JIFFIES));
- INIT_WORK(&priv->work, rndis_wext_worker);
return 0;
fail:
+ cancel_delayed_work_sync(&priv->stats_work);
+ cancel_work_sync(&priv->work);
+ flush_workqueue(priv->workqueue);
+ destroy_workqueue(priv->workqueue);
+
kfree(priv);
return retval;
}
diff --git a/drivers/net/wireless/rtl818x/rtl8187.h b/drivers/net/wireless/rtl818x/rtl8187.h
index 9718f61809c..edeff82a4d0 100644
--- a/drivers/net/wireless/rtl818x/rtl8187.h
+++ b/drivers/net/wireless/rtl818x/rtl8187.h
@@ -120,6 +120,12 @@ struct rtl8187_priv {
__le64 buf;
struct sk_buff_head queue;
} b_tx_status; /* This queue is used by both -b and non-b devices */
+ struct mutex io_mutex;
+ union {
+ u8 bits8;
+ __le16 bits16;
+ __le32 bits32;
+ } *io_dmabuf;
};
void rtl8187_write_phy(struct ieee80211_hw *dev, u8 addr, u32 data);
@@ -129,10 +135,14 @@ static inline u8 rtl818x_ioread8_idx(struct rtl8187_priv *priv,
{
u8 val;
+ mutex_lock(&priv->io_mutex);
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
- (unsigned long)addr, idx & 0x03, &val,
- sizeof(val), HZ / 2);
+ (unsigned long)addr, idx & 0x03,
+ &priv->io_dmabuf->bits8, sizeof(val), HZ / 2);
+
+ val = priv->io_dmabuf->bits8;
+ mutex_unlock(&priv->io_mutex);
return val;
}
@@ -147,10 +157,14 @@ static inline u16 rtl818x_ioread16_idx(struct rtl8187_priv *priv,
{
__le16 val;
+ mutex_lock(&priv->io_mutex);
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
- (unsigned long)addr, idx & 0x03, &val,
- sizeof(val), HZ / 2);
+ (unsigned long)addr, idx & 0x03,
+ &priv->io_dmabuf->bits16, sizeof(val), HZ / 2);
+
+ val = priv->io_dmabuf->bits16;
+ mutex_unlock(&priv->io_mutex);
return le16_to_cpu(val);
}
@@ -165,10 +179,14 @@ static inline u32 rtl818x_ioread32_idx(struct rtl8187_priv *priv,
{
__le32 val;
+ mutex_lock(&priv->io_mutex);
usb_control_msg(priv->udev, usb_rcvctrlpipe(priv->udev, 0),
RTL8187_REQ_GET_REG, RTL8187_REQT_READ,
- (unsigned long)addr, idx & 0x03, &val,
- sizeof(val), HZ / 2);
+ (unsigned long)addr, idx & 0x03,
+ &priv->io_dmabuf->bits32, sizeof(val), HZ / 2);
+
+ val = priv->io_dmabuf->bits32;
+ mutex_unlock(&priv->io_mutex);
return le32_to_cpu(val);
}
@@ -181,10 +199,15 @@ static inline u32 rtl818x_ioread32(struct rtl8187_priv *priv, __le32 *addr)
static inline void rtl818x_iowrite8_idx(struct rtl8187_priv *priv,
u8 *addr, u8 val, u8 idx)
{
+ mutex_lock(&priv->io_mutex);
+
+ priv->io_dmabuf->bits8 = val;
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
- (unsigned long)addr, idx & 0x03, &val,
- sizeof(val), HZ / 2);
+ (unsigned long)addr, idx & 0x03,
+ &priv->io_dmabuf->bits8, sizeof(val), HZ / 2);
+
+ mutex_unlock(&priv->io_mutex);
}
static inline void rtl818x_iowrite8(struct rtl8187_priv *priv, u8 *addr, u8 val)
@@ -195,12 +218,15 @@ static inline void rtl818x_iowrite8(struct rtl8187_priv *priv, u8 *addr, u8 val)
static inline void rtl818x_iowrite16_idx(struct rtl8187_priv *priv,
__le16 *addr, u16 val, u8 idx)
{
- __le16 buf = cpu_to_le16(val);
+ mutex_lock(&priv->io_mutex);
+ priv->io_dmabuf->bits16 = cpu_to_le16(val);
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
- (unsigned long)addr, idx & 0x03, &buf, sizeof(buf),
- HZ / 2);
+ (unsigned long)addr, idx & 0x03,
+ &priv->io_dmabuf->bits16, sizeof(val), HZ / 2);
+
+ mutex_unlock(&priv->io_mutex);
}
static inline void rtl818x_iowrite16(struct rtl8187_priv *priv, __le16 *addr,
@@ -212,12 +238,15 @@ static inline void rtl818x_iowrite16(struct rtl8187_priv *priv, __le16 *addr,
static inline void rtl818x_iowrite32_idx(struct rtl8187_priv *priv,
__le32 *addr, u32 val, u8 idx)
{
- __le32 buf = cpu_to_le32(val);
+ mutex_lock(&priv->io_mutex);
+ priv->io_dmabuf->bits32 = cpu_to_le32(val);
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
- (unsigned long)addr, idx & 0x03, &buf, sizeof(buf),
- HZ / 2);
+ (unsigned long)addr, idx & 0x03,
+ &priv->io_dmabuf->bits32, sizeof(val), HZ / 2);
+
+ mutex_unlock(&priv->io_mutex);
}
static inline void rtl818x_iowrite32(struct rtl8187_priv *priv, __le32 *addr,
diff --git a/drivers/net/wireless/rtl818x/rtl8187_dev.c b/drivers/net/wireless/rtl818x/rtl8187_dev.c
index fd81884b9c7..bac6cfba6ab 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_dev.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_dev.c
@@ -1329,6 +1329,14 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
priv = dev->priv;
priv->is_rtl8187b = (id->driver_info == DEVICE_RTL8187B);
+ /* allocate "DMA aware" buffer for register accesses */
+ priv->io_dmabuf = kmalloc(sizeof(*priv->io_dmabuf), GFP_KERNEL);
+ if (!priv->io_dmabuf) {
+ err = -ENOMEM;
+ goto err_free_dev;
+ }
+ mutex_init(&priv->io_mutex);
+
SET_IEEE80211_DEV(dev, &intf->dev);
usb_set_intfdata(intf, dev);
priv->udev = udev;
@@ -1495,7 +1503,7 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
err = ieee80211_register_hw(dev);
if (err) {
printk(KERN_ERR "rtl8187: Cannot register device\n");
- goto err_free_dev;
+ goto err_free_dmabuf;
}
mutex_init(&priv->conf_mutex);
skb_queue_head_init(&priv->b_tx_status.queue);
@@ -1506,6 +1514,8 @@ static int __devinit rtl8187_probe(struct usb_interface *intf,
return 0;
+ err_free_dmabuf:
+ kfree(priv->io_dmabuf);
err_free_dev:
ieee80211_free_hw(dev);
usb_set_intfdata(intf, NULL);
@@ -1526,6 +1536,7 @@ static void __devexit rtl8187_disconnect(struct usb_interface *intf)
priv = dev->priv;
usb_reset_device(priv->udev);
usb_put_dev(interface_to_usbdev(intf));
+ kfree(priv->io_dmabuf);
ieee80211_free_hw(dev);
}
diff --git a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
index 78df281b297..a09819386a1 100644
--- a/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
+++ b/drivers/net/wireless/rtl818x/rtl8187_rtl8225.c
@@ -88,9 +88,15 @@ static void rtl8225_write_8051(struct ieee80211_hw *dev, u8 addr, __le16 data)
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80);
udelay(10);
+ mutex_lock(&priv->io_mutex);
+
+ priv->io_dmabuf->bits16 = data;
usb_control_msg(priv->udev, usb_sndctrlpipe(priv->udev, 0),
RTL8187_REQ_SET_REG, RTL8187_REQT_WRITE,
- addr, 0x8225, &data, sizeof(data), HZ / 2);
+ addr, 0x8225, &priv->io_dmabuf->bits16, sizeof(data),
+ HZ / 2);
+
+ mutex_unlock(&priv->io_mutex);
rtl818x_iowrite16(priv, &priv->map->RFPinsOutput, reg80 | (1 << 2));
udelay(10);
diff --git a/drivers/pci/intel-iommu.c b/drivers/pci/intel-iommu.c
index 001b328adf8..a563fbe559d 100644
--- a/drivers/pci/intel-iommu.c
+++ b/drivers/pci/intel-iommu.c
@@ -59,6 +59,10 @@
#define DMA_32BIT_PFN IOVA_PFN(DMA_BIT_MASK(32))
#define DMA_64BIT_PFN IOVA_PFN(DMA_BIT_MASK(64))
+#ifndef PHYSICAL_PAGE_MASK
+#define PHYSICAL_PAGE_MASK PAGE_MASK
+#endif
+
/* global iommu list, set NULL for ignored DMAR units */
static struct intel_iommu **g_iommus;
@@ -1216,7 +1220,7 @@ static void dmar_init_reserved_ranges(void)
if (!r->flags || !(r->flags & IORESOURCE_MEM))
continue;
addr = r->start;
- addr &= PAGE_MASK;
+ addr &= PHYSICAL_PAGE_MASK;
size = r->end - addr;
size = PAGE_ALIGN(size);
iova = reserve_iova(&reserved_iova_list, IOVA_PFN(addr),
@@ -2173,7 +2177,8 @@ static dma_addr_t __intel_map_single(struct device *hwdev, phys_addr_t paddr,
* is not a big problem
*/
ret = domain_page_mapping(domain, start_paddr,
- ((u64)paddr) & PAGE_MASK, size, prot);
+ ((u64)paddr) & PHYSICAL_PAGE_MASK,
+ size, prot);
if (ret)
goto error;
@@ -2463,8 +2468,8 @@ static int intel_map_sg(struct device *hwdev, struct scatterlist *sglist, int ne
addr = page_to_phys(sg_page(sg)) + sg->offset;
size = aligned_size((u64)addr, sg->length);
ret = domain_page_mapping(domain, start_addr + offset,
- ((u64)addr) & PAGE_MASK,
- size, prot);
+ ((u64)addr) & PHYSICAL_PAGE_MASK,
+ size, prot);
if (ret) {
/* clear the page */
dma_pte_clear_range(domain, start_addr,
diff --git a/drivers/pci/msi.c b/drivers/pci/msi.c
index 6f2e6295e77..362773247fb 100644
--- a/drivers/pci/msi.c
+++ b/drivers/pci/msi.c
@@ -455,8 +455,6 @@ static int msix_capability_init(struct pci_dev *dev,
entry->msi_attrib.default_irq = dev->irq;
entry->msi_attrib.pos = pos;
entry->mask_base = base;
- entry->masked = readl(base + j * PCI_MSIX_ENTRY_SIZE +
- PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
msix_mask_irq(entry, 1);
list_add_tail(&entry->list, &dev->msi_list);
@@ -493,6 +491,12 @@ static int msix_capability_init(struct pci_dev *dev,
msix_set_enable(dev, 1);
dev->msix_enabled = 1;
+ list_for_each_entry(entry, &dev->msi_list, list) {
+ int vector = entry->msi_attrib.entry_nr;
+ entry->masked = readl(base + vector * PCI_MSIX_ENTRY_SIZE +
+ PCI_MSIX_ENTRY_VECTOR_CTRL_OFFSET);
+ }
+
return 0;
}
diff --git a/drivers/pci/pci.c b/drivers/pci/pci.c
index 34bf0fdf504..1a91bf9687a 100644
--- a/drivers/pci/pci.c
+++ b/drivers/pci/pci.c
@@ -557,7 +557,8 @@ static int pci_platform_power_transition(struct pci_dev *dev, pci_power_t state)
} else {
error = -ENODEV;
/* Fall back to PCI_D0 if native PM is not supported */
- pci_update_current_state(dev, PCI_D0);
+ if (!dev->pm_cap)
+ dev->current_state = PCI_D0;
}
return error;
diff --git a/drivers/pci/pcie/aer/aerdrv.h b/drivers/pci/pcie/aer/aerdrv.h
index c7ad68b6c6d..aa14482a477 100644
--- a/drivers/pci/pcie/aer/aerdrv.h
+++ b/drivers/pci/pcie/aer/aerdrv.h
@@ -95,6 +95,9 @@ struct aer_broadcast_data {
static inline pci_ers_result_t merge_result(enum pci_ers_result orig,
enum pci_ers_result new)
{
+ if (new == PCI_ERS_RESULT_NONE)
+ return orig;
+
switch (orig) {
case PCI_ERS_RESULT_CAN_RECOVER:
case PCI_ERS_RESULT_RECOVERED:
diff --git a/drivers/pci/pcie/portdrv_pci.c b/drivers/pci/pcie/portdrv_pci.c
index b924e2463f8..091ce70051e 100644
--- a/drivers/pci/pcie/portdrv_pci.c
+++ b/drivers/pci/pcie/portdrv_pci.c
@@ -200,7 +200,7 @@ static int slot_reset_iter(struct device *device, void *data)
static pci_ers_result_t pcie_portdrv_slot_reset(struct pci_dev *dev)
{
- pci_ers_result_t status = PCI_ERS_RESULT_NONE;
+ pci_ers_result_t status = PCI_ERS_RESULT_RECOVERED;
int retval;
/* If fatal, restore cfg space for possible link reset at upstream */
diff --git a/drivers/platform/x86/asus-laptop.c b/drivers/platform/x86/asus-laptop.c
index eeafc6c0160..bfc1a8892a3 100644
--- a/drivers/platform/x86/asus-laptop.c
+++ b/drivers/platform/x86/asus-laptop.c
@@ -269,16 +269,16 @@ static struct key_entry asus_keymap[] = {
{KE_KEY, 0x34, KEY_SWITCHVIDEOMODE},
{KE_KEY, 0x40, KEY_PREVIOUSSONG},
{KE_KEY, 0x41, KEY_NEXTSONG},
- {KE_KEY, 0x43, KEY_STOP},
+ {KE_KEY, 0x43, KEY_STOPCD},
{KE_KEY, 0x45, KEY_PLAYPAUSE},
{KE_KEY, 0x50, KEY_EMAIL},
{KE_KEY, 0x51, KEY_WWW},
- {KE_KEY, 0x5C, BTN_EXTRA}, /* Performance */
+ {KE_KEY, 0x5C, KEY_SCREENLOCK}, /* Screenlock */
{KE_KEY, 0x5D, KEY_WLAN},
{KE_KEY, 0x61, KEY_SWITCHVIDEOMODE},
{KE_KEY, 0x6B, BTN_TOUCH}, /* Lock Mouse */
{KE_KEY, 0x82, KEY_CAMERA},
- {KE_KEY, 0x8A, KEY_TV},
+ {KE_KEY, 0x8A, KEY_PROG1},
{KE_KEY, 0x95, KEY_MEDIA},
{KE_KEY, 0x99, KEY_PHONE},
{KE_END, 0},
diff --git a/drivers/platform/x86/eeepc-laptop.c b/drivers/platform/x86/eeepc-laptop.c
index 6f54fd1757c..353a898c369 100644
--- a/drivers/platform/x86/eeepc-laptop.c
+++ b/drivers/platform/x86/eeepc-laptop.c
@@ -158,6 +158,7 @@ enum { KE_KEY, KE_END };
static struct key_entry eeepc_keymap[] = {
/* Sleep already handled via generic ACPI code */
{KE_KEY, 0x10, KEY_WLAN },
+ {KE_KEY, 0x11, KEY_WLAN },
{KE_KEY, 0x12, KEY_PROG1 },
{KE_KEY, 0x13, KEY_MUTE },
{KE_KEY, 0x14, KEY_VOLUMEDOWN },
@@ -166,6 +167,8 @@ static struct key_entry eeepc_keymap[] = {
{KE_KEY, 0x1b, KEY_ZOOM },
{KE_KEY, 0x1c, KEY_PROG2 },
{KE_KEY, 0x1d, KEY_PROG3 },
+ {KE_KEY, NOTIFY_BRN_MIN, KEY_BRIGHTNESSDOWN },
+ {KE_KEY, NOTIFY_BRN_MIN + 2, KEY_BRIGHTNESSUP },
{KE_KEY, 0x30, KEY_SWITCHVIDEOMODE },
{KE_KEY, 0x31, KEY_SWITCHVIDEOMODE },
{KE_KEY, 0x32, KEY_SWITCHVIDEOMODE },
@@ -381,11 +384,13 @@ static ssize_t show_sys_acpi(int cm, char *buf)
EEEPC_CREATE_DEVICE_ATTR(camera, CM_ASL_CAMERA);
EEEPC_CREATE_DEVICE_ATTR(cardr, CM_ASL_CARDREADER);
EEEPC_CREATE_DEVICE_ATTR(disp, CM_ASL_DISPLAYSWITCH);
+EEEPC_CREATE_DEVICE_ATTR(cpufv, CM_ASL_CPUFV);
static struct attribute *platform_attributes[] = {
&dev_attr_camera.attr,
&dev_attr_cardr.attr,
&dev_attr_disp.attr,
+ &dev_attr_cpufv.attr,
NULL
};
@@ -512,15 +517,21 @@ static int eeepc_hotk_check(void)
return 0;
}
-static void notify_brn(void)
+static int notify_brn(void)
{
+ /* returns the *previous* brightness, or -1 */
struct backlight_device *bd = eeepc_backlight_device;
- if (bd)
+ if (bd) {
+ int old = bd->props.brightness;
bd->props.brightness = read_brightness(bd);
+ return old;
+ }
+ return -1;
}
static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
{
+ enum rfkill_state state;
struct pci_dev *dev;
struct pci_bus *bus = pci_find_bus(0, 1);
@@ -532,7 +543,9 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
return;
}
- if (get_acpi(CM_ASL_WLAN) == 1) {
+ eeepc_wlan_rfkill_state(ehotk->eeepc_wlan_rfkill, &state);
+
+ if (state == RFKILL_STATE_UNBLOCKED) {
dev = pci_get_slot(bus, 0);
if (dev) {
/* Device already present */
@@ -552,23 +565,41 @@ static void eeepc_rfkill_notify(acpi_handle handle, u32 event, void *data)
pci_dev_put(dev);
}
}
+
+ rfkill_force_state(ehotk->eeepc_wlan_rfkill, state);
}
static void eeepc_hotk_notify(acpi_handle handle, u32 event, void *data)
{
static struct key_entry *key;
u16 count;
+ int brn = -ENODEV;
if (!ehotk)
return;
if (event >= NOTIFY_BRN_MIN && event <= NOTIFY_BRN_MAX)
- notify_brn();
+ brn = notify_brn();
count = ehotk->event_count[event % 128]++;
acpi_bus_generate_proc_event(ehotk->device, event, count);
acpi_bus_generate_netlink_event(ehotk->device->pnp.device_class,
dev_name(&ehotk->device->dev), event,
count);
if (ehotk->inputdev) {
+ if (brn != -ENODEV) {
+ /* brightness-change events need special
+ * handling for conversion to key events
+ */
+ if (brn < 0)
+ brn = event;
+ else
+ brn += NOTIFY_BRN_MIN;
+ if (event < brn)
+ event = NOTIFY_BRN_MIN; /* brightness down */
+ else if (event > brn)
+ event = NOTIFY_BRN_MIN + 2; /* ... up */
+ else
+ event = NOTIFY_BRN_MIN + 1; /* ... unchanged */
+ }
key = eepc_get_entry_by_scancode(event);
if (key) {
switch (key->type) {
@@ -649,6 +680,9 @@ static int eeepc_hotk_add(struct acpi_device *device)
if (ACPI_FAILURE(status))
printk(EEEPC_ERR "Error installing notify handler\n");
+ eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
+ eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
+
if (get_acpi(CM_ASL_WLAN) != -1) {
ehotk->eeepc_wlan_rfkill = rfkill_allocate(&device->dev,
RFKILL_TYPE_WLAN);
@@ -704,9 +738,6 @@ static int eeepc_hotk_add(struct acpi_device *device)
goto bluetooth_fail;
}
- eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P6");
- eeepc_register_rfkill_notifier("\\_SB.PCI0.P0P7");
-
return 0;
bluetooth_fail:
@@ -717,6 +748,8 @@ static int eeepc_hotk_add(struct acpi_device *device)
wlan_fail:
if (ehotk->eeepc_wlan_rfkill)
rfkill_free(ehotk->eeepc_wlan_rfkill);
+ eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P6");
+ eeepc_unregister_rfkill_notifier("\\_SB.PCI0.P0P7");
ehotk_fail:
kfree(ehotk);
ehotk = NULL;
diff --git a/drivers/pnp/pnpacpi/core.c b/drivers/pnp/pnpacpi/core.c
index 9a3a682c698..9496494f340 100644
--- a/drivers/pnp/pnpacpi/core.c
+++ b/drivers/pnp/pnpacpi/core.c
@@ -110,11 +110,9 @@ static int pnpacpi_disable_resources(struct pnp_dev *dev)
/* acpi_unregister_gsi(pnp_irq(dev, 0)); */
ret = 0;
- if (acpi_bus_power_manageable(handle)) {
- ret = acpi_bus_set_power(handle, ACPI_STATE_D3);
- if (ret)
- return ret;
- }
+ if (acpi_bus_power_manageable(handle))
+ acpi_bus_set_power(handle, ACPI_STATE_D3);
+ /* continue even if acpi_bus_set_power() fails */
if (ACPI_FAILURE(acpi_evaluate_object(handle, "_DIS", NULL, NULL)))
ret = -ENODEV;
return ret;
diff --git a/drivers/regulator/da903x.c b/drivers/regulator/da903x.c
index 72b15495183..c6628f5a0af 100644
--- a/drivers/regulator/da903x.c
+++ b/drivers/regulator/da903x.c
@@ -497,7 +497,7 @@ static struct platform_driver da903x_regulator_driver = {
.owner = THIS_MODULE,
},
.probe = da903x_regulator_probe,
- .remove = da903x_regulator_remove,
+ .remove = __devexit_p(da903x_regulator_remove),
};
static int __init da903x_regulator_init(void)
diff --git a/drivers/rtc/rtc-pl030.c b/drivers/rtc/rtc-pl030.c
index 82615355215..aaf1f75fa29 100644
--- a/drivers/rtc/rtc-pl030.c
+++ b/drivers/rtc/rtc-pl030.c
@@ -102,7 +102,7 @@ static const struct rtc_class_ops pl030_ops = {
.set_alarm = pl030_set_alarm,
};
-static int pl030_probe(struct amba_device *dev, void *id)
+static int pl030_probe(struct amba_device *dev, struct amba_id *id)
{
struct pl030_rtc *rtc;
int ret;
diff --git a/drivers/rtc/rtc-pl031.c b/drivers/rtc/rtc-pl031.c
index 333eec689d2..451fc13784d 100644
--- a/drivers/rtc/rtc-pl031.c
+++ b/drivers/rtc/rtc-pl031.c
@@ -127,7 +127,7 @@ static int pl031_remove(struct amba_device *adev)
return 0;
}
-static int pl031_probe(struct amba_device *adev, void *id)
+static int pl031_probe(struct amba_device *adev, struct amba_id *id)
{
int ret;
struct pl031_local *ldata;
diff --git a/drivers/rtc/rtc-twl4030.c b/drivers/rtc/rtc-twl4030.c
index a6341e4f9a0..9c8c70c497d 100644
--- a/drivers/rtc/rtc-twl4030.c
+++ b/drivers/rtc/rtc-twl4030.c
@@ -495,9 +495,7 @@ static int twl4030_rtc_suspend(struct platform_device *pdev, pm_message_t state)
{
irqstat = rtc_irq_bits;
- /* REVISIT alarm may need to wake us from sleep */
- mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M |
- BIT_RTC_INTERRUPTS_REG_IT_ALARM_M);
+ mask_rtc_irq_bit(BIT_RTC_INTERRUPTS_REG_IT_TIMER_M);
return 0;
}
diff --git a/drivers/s390/scsi/zfcp_aux.c b/drivers/s390/scsi/zfcp_aux.c
index 616c60ffcf2..3ac27ee4739 100644
--- a/drivers/s390/scsi/zfcp_aux.c
+++ b/drivers/s390/scsi/zfcp_aux.c
@@ -97,9 +97,7 @@ static void __init zfcp_init_device_configure(char *busid, u64 wwpn, u64 lun)
ccw_device_set_online(adapter->ccw_device);
zfcp_erp_wait(adapter);
- wait_event(adapter->erp_done_wqh,
- !(atomic_read(&unit->status) &
- ZFCP_STATUS_UNIT_SCSI_WORK_PENDING));
+ flush_work(&unit->scsi_work);
down(&zfcp_data.config_sema);
zfcp_unit_put(unit);
@@ -279,6 +277,7 @@ struct zfcp_unit *zfcp_unit_enqueue(struct zfcp_port *port, u64 fcp_lun)
atomic_set(&unit->refcount, 0);
init_waitqueue_head(&unit->remove_wq);
+ INIT_WORK(&unit->scsi_work, zfcp_scsi_scan);
unit->port = port;
unit->fcp_lun = fcp_lun;
@@ -525,6 +524,8 @@ int zfcp_adapter_enqueue(struct ccw_device *ccw_device)
atomic_clear_mask(ZFCP_STATUS_COMMON_REMOVE, &adapter->status);
+ zfcp_fc_nameserver_init(adapter);
+
if (!zfcp_adapter_scsi_register(adapter))
return 0;
@@ -553,7 +554,6 @@ void zfcp_adapter_dequeue(struct zfcp_adapter *adapter)
cancel_work_sync(&adapter->scan_work);
cancel_work_sync(&adapter->stat_work);
- cancel_delayed_work_sync(&adapter->nsp.work);
zfcp_adapter_scsi_unregister(adapter);
sysfs_remove_group(&adapter->ccw_device->dev.kobj,
&zfcp_sysfs_adapter_attrs);
@@ -671,8 +671,7 @@ void zfcp_port_dequeue(struct zfcp_port *port)
list_del(&port->list);
write_unlock_irq(&zfcp_data.config_lock);
if (port->rport)
- fc_remote_port_delete(port->rport);
- port->rport = NULL;
+ port->rport->dd_data = NULL;
zfcp_adapter_put(port->adapter);
sysfs_remove_group(&port->sysfs_device.kobj, &zfcp_sysfs_port_attrs);
device_unregister(&port->sysfs_device);
diff --git a/drivers/s390/scsi/zfcp_ccw.c b/drivers/s390/scsi/zfcp_ccw.c
index cfb0dcb6e3f..733fe3bf628 100644
--- a/drivers/s390/scsi/zfcp_ccw.c
+++ b/drivers/s390/scsi/zfcp_ccw.c
@@ -108,7 +108,6 @@ static int zfcp_ccw_set_online(struct ccw_device *ccw_device)
/* initialize request counter */
BUG_ON(!zfcp_reqlist_isempty(adapter));
adapter->req_no = 0;
- zfcp_fc_nameserver_init(adapter);
zfcp_erp_modify_adapter_status(adapter, "ccsonl1", NULL,
ZFCP_STATUS_COMMON_RUNNING, ZFCP_SET);
diff --git a/drivers/s390/scsi/zfcp_cfdc.c b/drivers/s390/scsi/zfcp_cfdc.c
index 10cbfd172a2..8305c874e86 100644
--- a/drivers/s390/scsi/zfcp_cfdc.c
+++ b/drivers/s390/scsi/zfcp_cfdc.c
@@ -4,7 +4,7 @@
* Userspace interface for accessing the
* Access Control Lists / Control File Data Channel
*
- * Copyright IBM Corporation 2008
+ * Copyright IBM Corporation 2008, 2009
*/
#define KMSG_COMPONENT "zfcp"
@@ -197,6 +197,7 @@ static long zfcp_cfdc_dev_ioctl(struct file *file, unsigned int command,
retval = -ENXIO;
goto free_buffer;
}
+ zfcp_adapter_get(adapter);
retval = zfcp_cfdc_sg_setup(data->command, fsf_cfdc->sg,
data_user->control_file);
diff --git a/drivers/s390/scsi/zfcp_def.h b/drivers/s390/scsi/zfcp_def.h
index a0318630f04..4c362a9069f 100644
--- a/drivers/s390/scsi/zfcp_def.h
+++ b/drivers/s390/scsi/zfcp_def.h
@@ -255,7 +255,6 @@ enum zfcp_wka_status {
/* logical unit status */
#define ZFCP_STATUS_UNIT_SHARED 0x00000004
#define ZFCP_STATUS_UNIT_READONLY 0x00000008
-#define ZFCP_STATUS_UNIT_SCSI_WORK_PENDING 0x00000020
/* FSF request status (this does not have a common part) */
#define ZFCP_STATUS_FSFREQ_TASK_MANAGEMENT 0x00000002
@@ -530,6 +529,7 @@ struct zfcp_unit {
struct zfcp_erp_action erp_action; /* pending error recovery */
atomic_t erp_counter;
struct zfcp_latencies latencies;
+ struct work_struct scsi_work;
};
/* FSF request */
diff --git a/drivers/s390/scsi/zfcp_erp.c b/drivers/s390/scsi/zfcp_erp.c
index 631bdb1dfd6..fdc9b4352a6 100644
--- a/drivers/s390/scsi/zfcp_erp.c
+++ b/drivers/s390/scsi/zfcp_erp.c
@@ -719,6 +719,7 @@ static void zfcp_erp_adapter_strategy_close(struct zfcp_erp_action *act)
zfcp_qdio_close(adapter);
zfcp_fsf_req_dismiss_all(adapter);
adapter->fsf_req_seq_no = 0;
+ zfcp_fc_wka_port_force_offline(&adapter->nsp);
/* all ports and units are closed */
zfcp_erp_modify_adapter_status(adapter, "erascl1", NULL,
ZFCP_STATUS_COMMON_OPEN, ZFCP_CLEAR);
@@ -1176,48 +1177,6 @@ static void zfcp_erp_action_dequeue(struct zfcp_erp_action *erp_action)
}
}
-struct zfcp_erp_add_work {
- struct zfcp_unit *unit;
- struct work_struct work;
-};
-
-static void zfcp_erp_scsi_scan(struct work_struct *work)
-{
- struct zfcp_erp_add_work *p =
- container_of(work, struct zfcp_erp_add_work, work);
- struct zfcp_unit *unit = p->unit;
- struct fc_rport *rport = unit->port->rport;
-
- if (rport && rport->port_state == FC_PORTSTATE_ONLINE)
- scsi_scan_target(&rport->dev, 0, rport->scsi_target_id,
- scsilun_to_int((struct scsi_lun *)&unit->fcp_lun), 0);
- atomic_clear_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status);
- zfcp_unit_put(unit);
- wake_up(&unit->port->adapter->erp_done_wqh);
- kfree(p);
-}
-
-static void zfcp_erp_schedule_work(struct zfcp_unit *unit)
-{
- struct zfcp_erp_add_work *p;
-
- p = kzalloc(sizeof(*p), GFP_KERNEL);
- if (!p) {
- dev_err(&unit->port->adapter->ccw_device->dev,
- "Registering unit 0x%016Lx on port 0x%016Lx failed\n",
- (unsigned long long)unit->fcp_lun,
- (unsigned long long)unit->port->wwpn);
- return;
- }
-
- zfcp_unit_get(unit);
- atomic_set_mask(ZFCP_STATUS_UNIT_SCSI_WORK_PENDING, &unit->status);
- INIT_WORK(&p->work, zfcp_erp_scsi_scan);
- p->unit = unit;
- if (!queue_work(zfcp_data.work_queue, &p->work))
- zfcp_unit_put(unit);
-}
-
static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result)
{
struct zfcp_adapter *adapter = act->adapter;
@@ -1226,11 +1185,11 @@ static void zfcp_erp_action_cleanup(struct zfcp_erp_action *act, int result)
switch (act->action) {
case ZFCP_ERP_ACTION_REOPEN_UNIT:
- flush_work(&port->rport_work);
if ((result == ZFCP_ERP_SUCCEEDED) && !unit->device) {
- if (!(atomic_read(&unit->status) &
- ZFCP_STATUS_UNIT_SCSI_WORK_PENDING))
- zfcp_erp_schedule_work(unit);
+ zfcp_unit_get(unit);
+ if (scsi_queue_work(unit->port->adapter->scsi_host,
+ &unit->scsi_work) <= 0)
+ zfcp_unit_put(unit);
}
zfcp_unit_put(unit);
break;
@@ -1352,6 +1311,11 @@ static int zfcp_erp_thread(void *data)
while (!(atomic_read(&adapter->status) &
ZFCP_STATUS_ADAPTER_ERP_THREAD_KILL)) {
+
+ zfcp_rec_dbf_event_thread_lock("erthrd1", adapter);
+ ignore = down_interruptible(&adapter->erp_ready_sem);
+ zfcp_rec_dbf_event_thread_lock("erthrd2", adapter);
+
write_lock_irqsave(&adapter->erp_lock, flags);
next = adapter->erp_ready_head.next;
write_unlock_irqrestore(&adapter->erp_lock, flags);
@@ -1363,10 +1327,6 @@ static int zfcp_erp_thread(void *data)
if (zfcp_erp_strategy(act) != ZFCP_ERP_DISMISSED)
zfcp_erp_wakeup(adapter);
}
-
- zfcp_rec_dbf_event_thread_lock("erthrd1", adapter);
- ignore = down_interruptible(&adapter->erp_ready_sem);
- zfcp_rec_dbf_event_thread_lock("erthrd2", adapter);
}
atomic_clear_mask(ZFCP_STATUS_ADAPTER_ERP_THREAD_UP, &adapter->status);
diff --git a/drivers/s390/scsi/zfcp_ext.h b/drivers/s390/scsi/zfcp_ext.h
index f6399ca97bc..2e31b536548 100644
--- a/drivers/s390/scsi/zfcp_ext.h
+++ b/drivers/s390/scsi/zfcp_ext.h
@@ -106,6 +106,7 @@ extern void zfcp_fc_plogi_evaluate(struct zfcp_port *, struct fsf_plogi *);
extern void zfcp_test_link(struct zfcp_port *);
extern void zfcp_fc_link_test_work(struct work_struct *);
extern void zfcp_fc_nameserver_init(struct zfcp_adapter *);
+extern void zfcp_fc_wka_port_force_offline(struct zfcp_wka_port *);
/* zfcp_fsf.c */
extern int zfcp_fsf_open_port(struct zfcp_erp_action *);
@@ -158,6 +159,7 @@ extern void zfcp_scsi_rport_work(struct work_struct *);
extern void zfcp_scsi_schedule_rport_register(struct zfcp_port *);
extern void zfcp_scsi_schedule_rport_block(struct zfcp_port *);
extern void zfcp_scsi_schedule_rports_block(struct zfcp_adapter *);
+extern void zfcp_scsi_scan(struct work_struct *);
/* zfcp_sysfs.c */
extern struct attribute_group zfcp_sysfs_unit_attrs;
diff --git a/drivers/s390/scsi/zfcp_fc.c b/drivers/s390/scsi/zfcp_fc.c
index e8d032b9dfb..19ae0842047 100644
--- a/drivers/s390/scsi/zfcp_fc.c
+++ b/drivers/s390/scsi/zfcp_fc.c
@@ -98,13 +98,6 @@ static void zfcp_wka_port_offline(struct work_struct *work)
struct zfcp_wka_port *wka_port =
container_of(dw, struct zfcp_wka_port, work);
- /* Don't wait forvever. If the wka_port is too busy take it offline
- through a new call later */
- if (!wait_event_timeout(wka_port->completion_wq,
- atomic_read(&wka_port->refcount) == 0,
- HZ >> 1))
- return;
-
mutex_lock(&wka_port->mutex);
if ((atomic_read(&wka_port->refcount) != 0) ||
(wka_port->status != ZFCP_WKA_PORT_ONLINE))
@@ -142,6 +135,14 @@ void zfcp_fc_nameserver_init(struct zfcp_adapter *adapter)
INIT_DELAYED_WORK(&wka_port->work, zfcp_wka_port_offline);
}
+void zfcp_fc_wka_port_force_offline(struct zfcp_wka_port *wka)
+{
+ cancel_delayed_work_sync(&wka->work);
+ mutex_lock(&wka->mutex);
+ wka->status = ZFCP_WKA_PORT_OFFLINE;
+ mutex_unlock(&wka->mutex);
+}
+
static void _zfcp_fc_incoming_rscn(struct zfcp_fsf_req *fsf_req, u32 range,
struct fcp_rscn_element *elem)
{
@@ -372,7 +373,8 @@ static void zfcp_fc_adisc_handler(unsigned long data)
if (adisc->els.status) {
/* request rejected or timed out */
- zfcp_erp_port_forced_reopen(port, 0, "fcadh_1", NULL);
+ zfcp_erp_port_forced_reopen(port, ZFCP_STATUS_COMMON_ERP_FAILED,
+ "fcadh_1", NULL);
goto out;
}
@@ -431,11 +433,6 @@ void zfcp_fc_link_test_work(struct work_struct *work)
container_of(work, struct zfcp_port, test_link_work);
int retval;
- if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_UNBLOCKED)) {
- zfcp_port_put(port);
- return; /* port erp is running and will update rport status */
- }
-
zfcp_port_get(port);
port->rport_task = RPORT_DEL;
zfcp_scsi_rport_work(&port->rport_work);
@@ -542,6 +539,9 @@ static void zfcp_validate_port(struct zfcp_port *port)
{
struct zfcp_adapter *adapter = port->adapter;
+ if (!(atomic_read(&port->status) & ZFCP_STATUS_COMMON_NOESC))
+ return;
+
atomic_clear_mask(ZFCP_STATUS_COMMON_NOESC, &port->status);
if ((port->supported_classes != 0) ||
@@ -602,10 +602,8 @@ static int zfcp_scan_eval_gpn_ft(struct zfcp_gpn_ft *gpn_ft, int max_entries)
if (acc->wwpn == fc_host_port_name(adapter->scsi_host))
continue;
port = zfcp_get_port_by_wwpn(adapter, acc->wwpn);
- if (port) {
- zfcp_port_get(port);
+ if (port)
continue;
- }
port = zfcp_port_enqueue(adapter, acc->wwpn,
ZFCP_STATUS_COMMON_NOESC, d_id);
@@ -637,7 +635,8 @@ int zfcp_scan_ports(struct zfcp_adapter *adapter)
max_entries = chain ? ZFCP_GPN_FT_MAX_ENTRIES : ZFCP_GPN_FT_ENTRIES;
max_bytes = chain ? ZFCP_GPN_FT_MAX_SIZE : ZFCP_CT_SIZE_ONE_PAGE;
- if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT)
+ if (fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPORT &&
+ fc_host_port_type(adapter->scsi_host) != FC_PORTTYPE_NPIV)
return 0;
ret = zfcp_wka_port_get(&adapter->nsp);
diff --git a/drivers/s390/scsi/zfcp_fsf.c b/drivers/s390/scsi/zfcp_fsf.c
index b29f3121b66..74dee32afba 100644
--- a/drivers/s390/scsi/zfcp_fsf.c
+++ b/drivers/s390/scsi/zfcp_fsf.c
@@ -172,12 +172,16 @@ static void zfcp_fsf_link_down_info_eval(struct zfcp_fsf_req *req, char *id,
struct fsf_link_down_info *link_down)
{
struct zfcp_adapter *adapter = req->adapter;
+ unsigned long flags;
if (atomic_read(&adapter->status) & ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED)
return;
atomic_set_mask(ZFCP_STATUS_ADAPTER_LINK_UNPLUGGED, &adapter->status);
+
+ read_lock_irqsave(&zfcp_data.config_lock, flags);
zfcp_scsi_schedule_rports_block(adapter);
+ read_unlock_irqrestore(&zfcp_data.config_lock, flags);
if (!link_down)
goto out;
@@ -645,30 +649,30 @@ static void zfcp_fsf_exchange_port_data_handler(struct zfcp_fsf_req *req)
}
}
-static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter)
- __releases(&adapter->req_q_lock)
- __acquires(&adapter->req_q_lock)
+static int zfcp_fsf_sbal_check(struct zfcp_adapter *adapter)
{
struct zfcp_qdio_queue *req_q = &adapter->req_q;
- long ret;
- if (atomic_read(&req_q->count) <= -REQUEST_LIST_SIZE)
- return -EIO;
- if (atomic_read(&req_q->count) > 0)
- return 0;
+ spin_lock_bh(&adapter->req_q_lock);
+ if (atomic_read(&req_q->count))
+ return 1;
+ spin_unlock_bh(&adapter->req_q_lock);
+ return 0;
+}
+
+static int zfcp_fsf_req_sbal_get(struct zfcp_adapter *adapter)
+{
+ long ret;
- atomic_dec(&req_q->count);
spin_unlock_bh(&adapter->req_q_lock);
ret = wait_event_interruptible_timeout(adapter->request_wq,
- atomic_read(&req_q->count) >= 0,
- 5 * HZ);
- spin_lock_bh(&adapter->req_q_lock);
- atomic_inc(&req_q->count);
-
+ zfcp_fsf_sbal_check(adapter), 5 * HZ);
if (ret > 0)
return 0;
if (!ret)
atomic_inc(&adapter->qdio_outb_full);
+
+ spin_lock_bh(&adapter->req_q_lock);
return -EIO;
}
@@ -766,8 +770,9 @@ static struct zfcp_fsf_req *zfcp_fsf_req_create(struct zfcp_adapter *adapter,
static int zfcp_fsf_req_send(struct zfcp_fsf_req *req)
{
struct zfcp_adapter *adapter = req->adapter;
- unsigned long flags;
- int idx;
+ unsigned long flags;
+ int idx;
+ int with_qtcb = (req->qtcb != NULL);
/* put allocated FSF request into hash table */
spin_lock_irqsave(&adapter->req_list_lock, flags);
@@ -789,7 +794,7 @@ static int zfcp_fsf_req_send(struct zfcp_fsf_req *req)
}
/* Don't increase for unsolicited status */
- if (req->qtcb)
+ if (with_qtcb)
adapter->fsf_req_seq_no++;
adapter->req_no++;
@@ -1253,13 +1258,13 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter,
spin_lock_bh(&adapter->req_q_lock);
if (zfcp_fsf_req_sbal_get(adapter))
- goto out;
+ goto out_unlock;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_CONFIG_DATA,
0, NULL);
if (IS_ERR(req)) {
retval = PTR_ERR(req);
- goto out;
+ goto out_unlock;
}
sbale = zfcp_qdio_sbale_req(req);
@@ -1278,14 +1283,16 @@ int zfcp_fsf_exchange_config_data_sync(struct zfcp_adapter *adapter,
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
-out:
spin_unlock_bh(&adapter->req_q_lock);
if (!retval)
wait_event(req->completion_wq,
req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
zfcp_fsf_req_free(req);
+ return retval;
+out_unlock:
+ spin_unlock_bh(&adapter->req_q_lock);
return retval;
}
@@ -1352,13 +1359,13 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter,
spin_lock_bh(&adapter->req_q_lock);
if (zfcp_fsf_req_sbal_get(adapter))
- goto out;
+ goto out_unlock;
req = zfcp_fsf_req_create(adapter, FSF_QTCB_EXCHANGE_PORT_DATA, 0,
NULL);
if (IS_ERR(req)) {
retval = PTR_ERR(req);
- goto out;
+ goto out_unlock;
}
if (data)
@@ -1371,14 +1378,18 @@ int zfcp_fsf_exchange_port_data_sync(struct zfcp_adapter *adapter,
req->handler = zfcp_fsf_exchange_port_data_handler;
zfcp_fsf_start_timer(req, ZFCP_FSF_REQUEST_TIMEOUT);
retval = zfcp_fsf_req_send(req);
-out:
spin_unlock_bh(&adapter->req_q_lock);
+
if (!retval)
wait_event(req->completion_wq,
req->status & ZFCP_STATUS_FSFREQ_COMPLETED);
zfcp_fsf_req_free(req);
return retval;
+
+out_unlock:
+ spin_unlock_bh(&adapter->req_q_lock);
+ return retval;
}
static void zfcp_fsf_open_port_handler(struct zfcp_fsf_req *req)
@@ -2472,8 +2483,6 @@ out:
static void zfcp_fsf_control_file_handler(struct zfcp_fsf_req *req)
{
- if (req->qtcb->header.fsf_status != FSF_GOOD)
- req->status |= ZFCP_STATUS_FSFREQ_ERROR;
}
/**
diff --git a/drivers/s390/scsi/zfcp_scsi.c b/drivers/s390/scsi/zfcp_scsi.c
index 58201e1ae47..e8fbeaeb5fb 100644
--- a/drivers/s390/scsi/zfcp_scsi.c
+++ b/drivers/s390/scsi/zfcp_scsi.c
@@ -171,7 +171,7 @@ static int zfcp_scsi_eh_abort_handler(struct scsi_cmnd *scpnt)
write_unlock_irqrestore(&adapter->abort_lock, flags);
zfcp_scsi_dbf_event_abort("lte1", adapter, scpnt, NULL,
old_req_id);
- return SUCCESS;
+ return FAILED; /* completion could be in progress */
}
old_req->data = NULL;
@@ -486,10 +486,12 @@ static void zfcp_set_rport_dev_loss_tmo(struct fc_rport *rport, u32 timeout)
*/
static void zfcp_scsi_dev_loss_tmo_callbk(struct fc_rport *rport)
{
- struct zfcp_port *port = rport->dd_data;
+ struct zfcp_port *port;
write_lock_irq(&zfcp_data.config_lock);
- port->rport = NULL;
+ port = rport->dd_data;
+ if (port)
+ port->rport = NULL;
write_unlock_irq(&zfcp_data.config_lock);
}
@@ -503,9 +505,18 @@ static void zfcp_scsi_dev_loss_tmo_callbk(struct fc_rport *rport)
*/
static void zfcp_scsi_terminate_rport_io(struct fc_rport *rport)
{
- struct zfcp_port *port = rport->dd_data;
+ struct zfcp_port *port;
+
+ write_lock_irq(&zfcp_data.config_lock);
+ port = rport->dd_data;
+ if (port)
+ zfcp_port_get(port);
+ write_unlock_irq(&zfcp_data.config_lock);
- zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL);
+ if (port) {
+ zfcp_erp_port_reopen(port, 0, "sctrpi1", NULL);
+ zfcp_port_put(port);
+ }
}
static void zfcp_scsi_rport_register(struct zfcp_port *port)
@@ -534,8 +545,10 @@ static void zfcp_scsi_rport_register(struct zfcp_port *port)
static void zfcp_scsi_rport_block(struct zfcp_port *port)
{
- if (port->rport)
- fc_remote_port_delete(port->rport);
+ struct fc_rport *rport = port->rport;
+
+ if (rport)
+ fc_remote_port_delete(rport);
}
void zfcp_scsi_schedule_rport_register(struct zfcp_port *port)
@@ -583,6 +596,23 @@ void zfcp_scsi_rport_work(struct work_struct *work)
}
+void zfcp_scsi_scan(struct work_struct *work)
+{
+ struct zfcp_unit *unit = container_of(work, struct zfcp_unit,
+ scsi_work);
+ struct fc_rport *rport;
+
+ flush_work(&unit->port->rport_work);
+ rport = unit->port->rport;
+
+ if (rport && rport->port_state == FC_PORTSTATE_ONLINE)
+ scsi_scan_target(&rport->dev, 0, rport->scsi_target_id,
+ scsilun_to_int((struct scsi_lun *)
+ &unit->fcp_lun), 0);
+
+ zfcp_unit_put(unit);
+}
+
struct fc_function_template zfcp_transport_functions = {
.show_starget_port_id = 1,
.show_starget_port_name = 1,
diff --git a/drivers/s390/scsi/zfcp_sysfs.c b/drivers/s390/scsi/zfcp_sysfs.c
index 9a3b8e261c0..3e51e64d110 100644
--- a/drivers/s390/scsi/zfcp_sysfs.c
+++ b/drivers/s390/scsi/zfcp_sysfs.c
@@ -254,12 +254,21 @@ static ssize_t zfcp_sysfs_unit_remove_store(struct device *dev,
write_lock_irq(&zfcp_data.config_lock);
unit = zfcp_get_unit_by_lun(port, fcp_lun);
- if (unit && (atomic_read(&unit->refcount) == 0)) {
- zfcp_unit_get(unit);
- atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE, &unit->status);
- list_move(&unit->list, &unit_remove_lh);
- } else
- unit = NULL;
+ if (unit) {
+ write_unlock_irq(&zfcp_data.config_lock);
+ /* wait for possible timeout during SCSI probe */
+ flush_work(&unit->scsi_work);
+ write_lock_irq(&zfcp_data.config_lock);
+
+ if (atomic_read(&unit->refcount) == 0) {
+ zfcp_unit_get(unit);
+ atomic_set_mask(ZFCP_STATUS_COMMON_REMOVE,
+ &unit->status);
+ list_move(&unit->list, &unit_remove_lh);
+ } else {
+ unit = NULL;
+ }
+ }
write_unlock_irq(&zfcp_data.config_lock);
diff --git a/drivers/scsi/3w-9xxx.c b/drivers/scsi/3w-9xxx.c
index 8b7983aba8f..36c21b19e5d 100644
--- a/drivers/scsi/3w-9xxx.c
+++ b/drivers/scsi/3w-9xxx.c
@@ -1978,7 +1978,8 @@ static void twa_unmap_scsi_data(TW_Device_Extension *tw_dev, int request_id)
{
struct scsi_cmnd *cmd = tw_dev->srb[request_id];
- scsi_dma_unmap(cmd);
+ if (cmd->SCp.phase == TW_PHASE_SGLIST)
+ scsi_dma_unmap(cmd);
} /* End twa_unmap_scsi_data() */
/* scsi_host_template initializer */
diff --git a/drivers/scsi/3w-xxxx.c b/drivers/scsi/3w-xxxx.c
index c03f1d2c9e2..faa0fcfed71 100644
--- a/drivers/scsi/3w-xxxx.c
+++ b/drivers/scsi/3w-xxxx.c
@@ -6,7 +6,7 @@
Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Brad Strand <linux@3ware.com>
- Copyright (C) 1999-2007 3ware Inc.
+ Copyright (C) 1999-2009 3ware Inc.
Kernel compatiblity By: Andre Hedrick <andre@suse.com>
Non-Copyright (C) 2000 Andre Hedrick <andre@suse.com>
@@ -1294,7 +1294,8 @@ static void tw_unmap_scsi_data(struct pci_dev *pdev, struct scsi_cmnd *cmd)
{
dprintk(KERN_WARNING "3w-xxxx: tw_unmap_scsi_data()\n");
- scsi_dma_unmap(cmd);
+ if (cmd->SCp.phase == TW_PHASE_SGLIST)
+ scsi_dma_unmap(cmd);
} /* End tw_unmap_scsi_data() */
/* This function will reset a device extension */
diff --git a/drivers/scsi/3w-xxxx.h b/drivers/scsi/3w-xxxx.h
index 8e71e5e122b..a5a2ba2561d 100644
--- a/drivers/scsi/3w-xxxx.h
+++ b/drivers/scsi/3w-xxxx.h
@@ -6,7 +6,7 @@
Arnaldo Carvalho de Melo <acme@conectiva.com.br>
Brad Strand <linux@3ware.com>
- Copyright (C) 1999-2007 3ware Inc.
+ Copyright (C) 1999-2009 3ware Inc.
Kernel compatiblity By: Andre Hedrick <andre@suse.com>
Non-Copyright (C) 2000 Andre Hedrick <andre@suse.com>
diff --git a/drivers/scsi/Kconfig b/drivers/scsi/Kconfig
index 8ed2990c826..fb2740789b6 100644
--- a/drivers/scsi/Kconfig
+++ b/drivers/scsi/Kconfig
@@ -628,6 +628,17 @@ config FCOE
---help---
Fibre Channel over Ethernet module
+config FCOE_FNIC
+ tristate "Cisco FNIC Driver"
+ depends on PCI && X86
+ select LIBFC
+ help
+ This is support for the Cisco PCI-Express FCoE HBA.
+
+ To compile this driver as a module, choose M here and read
+ <file:Documentation/scsi/scsi.txt>.
+ The module will be called fnic.
+
config SCSI_DMX3191D
tristate "DMX3191D SCSI support"
depends on PCI && SCSI
diff --git a/drivers/scsi/Makefile b/drivers/scsi/Makefile
index e7c861ac417..a5049cfb40e 100644
--- a/drivers/scsi/Makefile
+++ b/drivers/scsi/Makefile
@@ -39,6 +39,7 @@ obj-$(CONFIG_SCSI_DH) += device_handler/
obj-$(CONFIG_LIBFC) += libfc/
obj-$(CONFIG_LIBFCOE) += fcoe/
obj-$(CONFIG_FCOE) += fcoe/
+obj-$(CONFIG_FCOE_FNIC) += fnic/
obj-$(CONFIG_ISCSI_TCP) += libiscsi.o libiscsi_tcp.o iscsi_tcp.o
obj-$(CONFIG_INFINIBAND_ISER) += libiscsi.o
obj-$(CONFIG_SCSI_A4000T) += 53c700.o a4000t.o
diff --git a/drivers/scsi/cxgb3i/cxgb3i.h b/drivers/scsi/cxgb3i/cxgb3i.h
index d362860e750..59b0958d2d1 100644
--- a/drivers/scsi/cxgb3i/cxgb3i.h
+++ b/drivers/scsi/cxgb3i/cxgb3i.h
@@ -34,7 +34,7 @@
#include "cxgb3i_offload.h"
#include "cxgb3i_ddp.h"
-#define CXGB3I_SCSI_QDEPTH_DFLT 128
+#define CXGB3I_SCSI_HOST_QDEPTH 1024
#define CXGB3I_MAX_TARGET CXGB3I_MAX_CONN
#define CXGB3I_MAX_LUN 512
#define ISCSI_PDU_NONPAYLOAD_MAX \
diff --git a/drivers/scsi/cxgb3i/cxgb3i_ddp.c b/drivers/scsi/cxgb3i/cxgb3i_ddp.c
index d06a661c209..99c91254790 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_ddp.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_ddp.c
@@ -120,20 +120,26 @@ static void clear_ddp_map(struct cxgb3i_ddp_info *ddp, unsigned int tag,
}
static inline int ddp_find_unused_entries(struct cxgb3i_ddp_info *ddp,
- int start, int max, int count,
+ unsigned int start, unsigned int max,
+ unsigned int count,
struct cxgb3i_gather_list *gl)
{
- unsigned int i, j;
+ unsigned int i, j, k;
+ /* not enough entries */
+ if ((max - start) < count)
+ return -EBUSY;
+
+ max -= count;
spin_lock(&ddp->map_lock);
- for (i = start; i <= max;) {
- for (j = 0; j < count; j++) {
- if (ddp->gl_map[i + j])
+ for (i = start; i < max;) {
+ for (j = 0, k = i; j < count; j++, k++) {
+ if (ddp->gl_map[k])
break;
}
if (j == count) {
- for (j = 0; j < count; j++)
- ddp->gl_map[i + j] = gl;
+ for (j = 0, k = i; j < count; j++, k++)
+ ddp->gl_map[k] = gl;
spin_unlock(&ddp->map_lock);
return i;
}
@@ -354,7 +360,7 @@ int cxgb3i_ddp_tag_reserve(struct t3cdev *tdev, unsigned int tid,
struct cxgb3i_ddp_info *ddp = tdev->ulp_iscsi;
struct pagepod_hdr hdr;
unsigned int npods;
- int idx = -1, idx_max;
+ int idx = -1;
int err = -ENOMEM;
u32 sw_tag = *tagp;
u32 tag;
@@ -367,17 +373,17 @@ int cxgb3i_ddp_tag_reserve(struct t3cdev *tdev, unsigned int tid,
}
npods = (gl->nelem + PPOD_PAGES_MAX - 1) >> PPOD_PAGES_SHIFT;
- idx_max = ddp->nppods - npods + 1;
if (ddp->idx_last == ddp->nppods)
- idx = ddp_find_unused_entries(ddp, 0, idx_max, npods, gl);
+ idx = ddp_find_unused_entries(ddp, 0, ddp->nppods, npods, gl);
else {
idx = ddp_find_unused_entries(ddp, ddp->idx_last + 1,
- idx_max, npods, gl);
- if (idx < 0 && ddp->idx_last >= npods)
+ ddp->nppods, npods, gl);
+ if (idx < 0 && ddp->idx_last >= npods) {
idx = ddp_find_unused_entries(ddp, 0,
- ddp->idx_last - npods + 1,
+ min(ddp->idx_last + npods, ddp->nppods),
npods, gl);
+ }
}
if (idx < 0) {
ddp_log_debug("xferlen %u, gl %u, npods %u NO DDP.\n",
diff --git a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
index fff8e432764..9212400b9b1 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_iscsi.c
@@ -876,13 +876,14 @@ static struct scsi_host_template cxgb3i_host_template = {
.proc_name = "cxgb3i",
.queuecommand = iscsi_queuecommand,
.change_queue_depth = iscsi_change_queue_depth,
- .can_queue = CXGB3I_SCSI_QDEPTH_DFLT - 1,
+ .can_queue = CXGB3I_SCSI_HOST_QDEPTH,
.sg_tablesize = SG_ALL,
.max_sectors = 0xFFFF,
- .cmd_per_lun = CXGB3I_SCSI_QDEPTH_DFLT,
+ .cmd_per_lun = ISCSI_DEF_CMD_PER_LUN,
.eh_abort_handler = iscsi_eh_abort,
.eh_device_reset_handler = iscsi_eh_device_reset,
.eh_target_reset_handler = iscsi_eh_target_reset,
+ .target_alloc = iscsi_target_alloc,
.use_clustering = DISABLE_CLUSTERING,
.this_id = -1,
};
diff --git a/drivers/scsi/cxgb3i/cxgb3i_offload.c b/drivers/scsi/cxgb3i/cxgb3i_offload.c
index 4d8654cdbda..e11c9c180f3 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_offload.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_offload.c
@@ -1737,7 +1737,7 @@ int cxgb3i_c3cn_send_pdus(struct s3_conn *c3cn, struct sk_buff *skb)
c3cn_tx_debug("c3cn 0x%p, snd %u - %u > %u.\n",
c3cn, c3cn->write_seq, c3cn->snd_una,
cxgb3_snd_win);
- err = -EAGAIN;
+ err = -ENOBUFS;
goto out_err;
}
@@ -1775,6 +1775,8 @@ done:
out_err:
if (copied == 0 && err == -EPIPE)
copied = c3cn->err ? c3cn->err : -EPIPE;
+ else
+ copied = err;
goto done;
}
diff --git a/drivers/scsi/cxgb3i/cxgb3i_pdu.c b/drivers/scsi/cxgb3i/cxgb3i_pdu.c
index 7eebc9a7cb3..70910507117 100644
--- a/drivers/scsi/cxgb3i/cxgb3i_pdu.c
+++ b/drivers/scsi/cxgb3i/cxgb3i_pdu.c
@@ -400,17 +400,18 @@ int cxgb3i_conn_xmit_pdu(struct iscsi_task *task)
return 0;
}
- if (err < 0 && err != -EAGAIN) {
- kfree_skb(skb);
- cxgb3i_tx_debug("itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n",
- task->itt, skb, skb->len, skb->data_len, err);
- iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err);
- iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED);
+ if (err == -EAGAIN || err == -ENOBUFS) {
+ /* reset skb to send when we are called again */
+ tdata->skb = skb;
return err;
}
- /* reset skb to send when we are called again */
- tdata->skb = skb;
- return -EAGAIN;
+
+ kfree_skb(skb);
+ cxgb3i_tx_debug("itt 0x%x, skb 0x%p, len %u/%u, xmit err %d.\n",
+ task->itt, skb, skb->len, skb->data_len, err);
+ iscsi_conn_printk(KERN_ERR, task->conn, "xmit err %d.\n", err);
+ iscsi_conn_failure(task->conn, ISCSI_ERR_XMIT_FAILED);
+ return err;
}
int cxgb3i_pdu_init(void)
diff --git a/drivers/scsi/fcoe/fcoe.c b/drivers/scsi/fcoe/fcoe.c
index 94e1e318977..03e1926f40b 100644
--- a/drivers/scsi/fcoe/fcoe.c
+++ b/drivers/scsi/fcoe/fcoe.c
@@ -57,7 +57,7 @@ DEFINE_RWLOCK(fcoe_hostlist_lock);
DEFINE_TIMER(fcoe_timer, NULL, 0, 0);
DEFINE_PER_CPU(struct fcoe_percpu_s, fcoe_percpu);
-/* Function Prototyes */
+/* Function Prototypes */
static int fcoe_reset(struct Scsi_Host *shost);
static int fcoe_xmit(struct fc_lport *, struct fc_frame *);
static int fcoe_rcv(struct sk_buff *, struct net_device *,
@@ -138,7 +138,6 @@ static struct scsi_host_template fcoe_shost_template = {
/**
* fcoe_lport_config() - sets up the fc_lport
* @lp: ptr to the fc_lport
- * @shost: ptr to the parent scsi host
*
* Returns: 0 for success
*/
@@ -256,6 +255,7 @@ static int fcoe_netdev_config(struct fc_lport *lp, struct net_device *netdev)
rtnl_lock();
memcpy(flogi_maddr, (u8[6]) FC_FCOE_FLOGI_MAC, ETH_ALEN);
dev_unicast_add(fc->real_dev, flogi_maddr, ETH_ALEN);
+ dev_mc_add(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
rtnl_unlock();
/*
@@ -380,7 +380,7 @@ static int fcoe_if_destroy(struct net_device *netdev)
dev_mc_delete(fc->real_dev, FIP_ALL_ENODE_MACS, ETH_ALEN, 0);
rtnl_unlock();
- /* Free the per-CPU revieve threads */
+ /* Free the per-CPU receive threads */
fcoe_percpu_clean(lp);
/* Free existing skbs */
@@ -720,7 +720,7 @@ static void fcoe_percpu_thread_destroy(unsigned int cpu)
}
#else
/*
- * This a non-SMP scenario where the singluar Rx thread is
+ * This a non-SMP scenario where the singular Rx thread is
* being removed. Free all skbs and stop the thread.
*/
spin_lock_bh(&p->fcoe_rx_list.lock);
@@ -777,7 +777,7 @@ static struct notifier_block fcoe_cpu_notifier = {
* @skb: the receive skb
* @dev: associated net device
* @ptype: context
- * @odldev: last device
+ * @olddev: last device
*
* this function will receive the packet and build fc frame and pass it up
*
@@ -884,7 +884,6 @@ err2:
kfree_skb(skb);
return -1;
}
-EXPORT_SYMBOL_GPL(fcoe_rcv);
/**
* fcoe_start_io() - pass to netdev to start xmit for fcoe
@@ -905,7 +904,7 @@ static inline int fcoe_start_io(struct sk_buff *skb)
}
/**
- * fcoe_get_paged_crc_eof() - in case we need alloc a page for crc_eof
+ * fcoe_get_paged_crc_eof() - in case we need to alloc a page for crc_eof
* @skb: the skb to be xmitted
* @tlen: total len
*
@@ -947,7 +946,7 @@ static int fcoe_get_paged_crc_eof(struct sk_buff *skb, int tlen)
/**
* fcoe_fc_crc() - calculates FC CRC in this fcoe skb
- * @fp: the fc_frame containg data to be checksummed
+ * @fp: the fc_frame containing data to be checksummed
*
* This uses crc32() to calculate the crc for fc frame
* Return : 32 bit crc
@@ -1011,7 +1010,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
wlen = skb->len / FCOE_WORD_TO_BYTE;
if (!lp->link_up) {
- kfree(skb);
+ kfree_skb(skb);
return 0;
}
@@ -1062,7 +1061,7 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
cp = NULL;
}
- /* adjust skb netowrk/transport offsets to match mac/fcoe/fc */
+ /* adjust skb network/transport offsets to match mac/fcoe/fc */
skb_push(skb, elen + hlen);
skb_reset_mac_header(skb);
skb_reset_network_header(skb);
@@ -1123,7 +1122,6 @@ int fcoe_xmit(struct fc_lport *lp, struct fc_frame *fp)
return 0;
}
-EXPORT_SYMBOL_GPL(fcoe_xmit);
/**
* fcoe_percpu_receive_thread() - recv thread per cpu
@@ -1296,17 +1294,16 @@ void fcoe_watchdog(ulong vp)
/**
- * fcoe_check_wait_queue() - put the skb into fcoe pending xmit queue
- * @lp: the fc_port for this skb
- * @skb: the associated skb to be xmitted
+ * fcoe_check_wait_queue() - attempt to clear the transmit backlog
+ * @lp: the fc_lport
*
* This empties the wait_queue, dequeue the head of the wait_queue queue
* and calls fcoe_start_io() for each packet, if all skb have been
* transmitted, return qlen or -1 if a error occurs, then restore
- * wait_queue and try again later.
+ * wait_queue and try again later.
*
* The wait_queue is used when the skb transmit fails. skb will go
- * in the wait_queue which will be emptied by the time function OR
+ * in the wait_queue which will be emptied by the timer function or
* by the next skb transmit.
*
* Returns: 0 for success
@@ -1355,10 +1352,6 @@ out:
*/
static void fcoe_dev_setup()
{
- /*
- * here setup a interface specific wd time to
- * monitor the link state
- */
register_netdevice_notifier(&fcoe_notifier);
}
@@ -1437,10 +1430,9 @@ out:
/**
* fcoe_if_to_netdev() - parse a name buffer to get netdev
- * @ifname: fixed array for output parsed ifname
* @buffer: incoming buffer to be copied
*
- * Returns: NULL or ptr to netdeive
+ * Returns: NULL or ptr to net_device
*/
static struct net_device *fcoe_if_to_netdev(const char *buffer)
{
@@ -1458,7 +1450,7 @@ static struct net_device *fcoe_if_to_netdev(const char *buffer)
}
/**
- * fcoe_netdev_to_module_owner() - finds out the nic drive moddule of the netdev
+ * fcoe_netdev_to_module_owner() - finds out the driver module of the netdev
* @netdev: the target netdev
*
* Returns: ptr to the struct module, NULL for failure
@@ -1488,7 +1480,7 @@ fcoe_netdev_to_module_owner(const struct net_device *netdev)
* Holds the Ethernet driver module by try_module_get() for
* the corresponding netdev.
*
- * Returns: 0 for succsss
+ * Returns: 0 for success
*/
static int fcoe_ethdrv_get(const struct net_device *netdev)
{
@@ -1510,7 +1502,7 @@ static int fcoe_ethdrv_get(const struct net_device *netdev)
* Releases the Ethernet driver module by module_put for
* the corresponding netdev.
*
- * Returns: 0 for succsss
+ * Returns: 0 for success
*/
static int fcoe_ethdrv_put(const struct net_device *netdev)
{
@@ -1528,7 +1520,7 @@ static int fcoe_ethdrv_put(const struct net_device *netdev)
/**
* fcoe_destroy() - handles the destroy from sysfs
- * @buffer: expcted to be a eth if name
+ * @buffer: expected to be an eth if name
* @kp: associated kernel param
*
* Returns: 0 for success
@@ -1565,7 +1557,7 @@ out_nodev:
/**
* fcoe_create() - Handles the create call from sysfs
- * @buffer: expcted to be a eth if name
+ * @buffer: expected to be an eth if name
* @kp: associated kernel param
*
* Returns: 0 for success
@@ -1652,7 +1644,6 @@ int fcoe_link_ok(struct fc_lport *lp)
return rc;
}
-EXPORT_SYMBOL_GPL(fcoe_link_ok);
/**
* fcoe_percpu_clean() - Clear the pending skbs for an lport
@@ -1684,7 +1675,6 @@ void fcoe_percpu_clean(struct fc_lport *lp)
spin_unlock_bh(&pp->fcoe_rx_list.lock);
}
}
-EXPORT_SYMBOL_GPL(fcoe_percpu_clean);
/**
* fcoe_clean_pending_queue() - Dequeue a skb and free it
@@ -1705,7 +1695,6 @@ void fcoe_clean_pending_queue(struct fc_lport *lp)
}
spin_unlock_bh(&fc->fcoe_pending_queue.lock);
}
-EXPORT_SYMBOL_GPL(fcoe_clean_pending_queue);
/**
* fcoe_reset() - Resets the fcoe
@@ -1719,11 +1708,10 @@ int fcoe_reset(struct Scsi_Host *shost)
fc_lport_reset(lport);
return 0;
}
-EXPORT_SYMBOL_GPL(fcoe_reset);
/**
* fcoe_hostlist_lookup_softc() - find the corresponding lport by a given device
- * @device: this is currently ptr to net_device
+ * @dev: this is currently ptr to net_device
*
* Returns: NULL or the located fcoe_softc
*/
@@ -1757,11 +1745,10 @@ struct fc_lport *fcoe_hostlist_lookup(const struct net_device *netdev)
return (fc) ? fc->ctlr.lp : NULL;
}
-EXPORT_SYMBOL_GPL(fcoe_hostlist_lookup);
/**
* fcoe_hostlist_add() - Add a lport to lports list
- * @lp: ptr to the fc_lport to badded
+ * @lp: ptr to the fc_lport to be added
*
* Returns: 0 for success
*/
@@ -1778,11 +1765,10 @@ int fcoe_hostlist_add(const struct fc_lport *lp)
}
return 0;
}
-EXPORT_SYMBOL_GPL(fcoe_hostlist_add);
/**
* fcoe_hostlist_remove() - remove a lport from lports list
- * @lp: ptr to the fc_lport to badded
+ * @lp: ptr to the fc_lport to be removed
*
* Returns: 0 for success
*/
@@ -1798,7 +1784,6 @@ int fcoe_hostlist_remove(const struct fc_lport *lp)
return 0;
}
-EXPORT_SYMBOL_GPL(fcoe_hostlist_remove);
/**
* fcoe_init() - fcoe module loading initialization
diff --git a/drivers/scsi/fcoe/libfcoe.c b/drivers/scsi/fcoe/libfcoe.c
index f410f4abb54..62ba0f39c6b 100644
--- a/drivers/scsi/fcoe/libfcoe.c
+++ b/drivers/scsi/fcoe/libfcoe.c
@@ -122,7 +122,7 @@ static void fcoe_ctlr_reset_fcfs(struct fcoe_ctlr *fip)
}
/**
- * fcoe_ctrl_destroy() - Disable and tear-down the FCoE controller.
+ * fcoe_ctlr_destroy() - Disable and tear-down the FCoE controller.
* @fip: FCoE controller.
*
* This is called by FCoE drivers before freeing the &fcoe_ctlr.
diff --git a/drivers/scsi/fnic/Makefile b/drivers/scsi/fnic/Makefile
new file mode 100644
index 00000000000..37c3440bc17
--- /dev/null
+++ b/drivers/scsi/fnic/Makefile
@@ -0,0 +1,15 @@
+obj-$(CONFIG_FCOE_FNIC) += fnic.o
+
+fnic-y := \
+ fnic_attrs.o \
+ fnic_isr.o \
+ fnic_main.o \
+ fnic_res.o \
+ fnic_fcs.o \
+ fnic_scsi.o \
+ vnic_cq.o \
+ vnic_dev.o \
+ vnic_intr.o \
+ vnic_rq.o \
+ vnic_wq_copy.o \
+ vnic_wq.o
diff --git a/drivers/scsi/fnic/cq_desc.h b/drivers/scsi/fnic/cq_desc.h
new file mode 100644
index 00000000000..d1225cf6320
--- /dev/null
+++ b/drivers/scsi/fnic/cq_desc.h
@@ -0,0 +1,78 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _CQ_DESC_H_
+#define _CQ_DESC_H_
+
+/*
+ * Completion queue descriptor types
+ */
+enum cq_desc_types {
+ CQ_DESC_TYPE_WQ_ENET = 0,
+ CQ_DESC_TYPE_DESC_COPY = 1,
+ CQ_DESC_TYPE_WQ_EXCH = 2,
+ CQ_DESC_TYPE_RQ_ENET = 3,
+ CQ_DESC_TYPE_RQ_FCP = 4,
+};
+
+/* Completion queue descriptor: 16B
+ *
+ * All completion queues have this basic layout. The
+ * type_specfic area is unique for each completion
+ * queue type.
+ */
+struct cq_desc {
+ __le16 completed_index;
+ __le16 q_number;
+ u8 type_specfic[11];
+ u8 type_color;
+};
+
+#define CQ_DESC_TYPE_BITS 4
+#define CQ_DESC_TYPE_MASK ((1 << CQ_DESC_TYPE_BITS) - 1)
+#define CQ_DESC_COLOR_MASK 1
+#define CQ_DESC_COLOR_SHIFT 7
+#define CQ_DESC_Q_NUM_BITS 10
+#define CQ_DESC_Q_NUM_MASK ((1 << CQ_DESC_Q_NUM_BITS) - 1)
+#define CQ_DESC_COMP_NDX_BITS 12
+#define CQ_DESC_COMP_NDX_MASK ((1 << CQ_DESC_COMP_NDX_BITS) - 1)
+
+static inline void cq_desc_dec(const struct cq_desc *desc_arg,
+ u8 *type, u8 *color, u16 *q_number, u16 *completed_index)
+{
+ const struct cq_desc *desc = desc_arg;
+ const u8 type_color = desc->type_color;
+
+ *color = (type_color >> CQ_DESC_COLOR_SHIFT) & CQ_DESC_COLOR_MASK;
+
+ /*
+ * Make sure color bit is read from desc *before* other fields
+ * are read from desc. Hardware guarantees color bit is last
+ * bit (byte) written. Adding the rmb() prevents the compiler
+ * and/or CPU from reordering the reads which would potentially
+ * result in reading stale values.
+ */
+
+ rmb();
+
+ *type = type_color & CQ_DESC_TYPE_MASK;
+ *q_number = le16_to_cpu(desc->q_number) & CQ_DESC_Q_NUM_MASK;
+ *completed_index = le16_to_cpu(desc->completed_index) &
+ CQ_DESC_COMP_NDX_MASK;
+}
+
+#endif /* _CQ_DESC_H_ */
diff --git a/drivers/scsi/fnic/cq_enet_desc.h b/drivers/scsi/fnic/cq_enet_desc.h
new file mode 100644
index 00000000000..a9fa26f82dd
--- /dev/null
+++ b/drivers/scsi/fnic/cq_enet_desc.h
@@ -0,0 +1,167 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _CQ_ENET_DESC_H_
+#define _CQ_ENET_DESC_H_
+
+#include "cq_desc.h"
+
+/* Ethernet completion queue descriptor: 16B */
+struct cq_enet_wq_desc {
+ __le16 completed_index;
+ __le16 q_number;
+ u8 reserved[11];
+ u8 type_color;
+};
+
+static inline void cq_enet_wq_desc_dec(struct cq_enet_wq_desc *desc,
+ u8 *type, u8 *color, u16 *q_number, u16 *completed_index)
+{
+ cq_desc_dec((struct cq_desc *)desc, type,
+ color, q_number, completed_index);
+}
+
+/* Completion queue descriptor: Ethernet receive queue, 16B */
+struct cq_enet_rq_desc {
+ __le16 completed_index_flags;
+ __le16 q_number_rss_type_flags;
+ __le32 rss_hash;
+ __le16 bytes_written_flags;
+ __le16 vlan;
+ __le16 checksum_fcoe;
+ u8 flags;
+ u8 type_color;
+};
+
+#define CQ_ENET_RQ_DESC_FLAGS_INGRESS_PORT (0x1 << 12)
+#define CQ_ENET_RQ_DESC_FLAGS_FCOE (0x1 << 13)
+#define CQ_ENET_RQ_DESC_FLAGS_EOP (0x1 << 14)
+#define CQ_ENET_RQ_DESC_FLAGS_SOP (0x1 << 15)
+
+#define CQ_ENET_RQ_DESC_RSS_TYPE_BITS 4
+#define CQ_ENET_RQ_DESC_RSS_TYPE_MASK \
+ ((1 << CQ_ENET_RQ_DESC_RSS_TYPE_BITS) - 1)
+#define CQ_ENET_RQ_DESC_RSS_TYPE_NONE 0
+#define CQ_ENET_RQ_DESC_RSS_TYPE_IPv4 1
+#define CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv4 2
+#define CQ_ENET_RQ_DESC_RSS_TYPE_IPv6 3
+#define CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv6 4
+#define CQ_ENET_RQ_DESC_RSS_TYPE_IPv6_EX 5
+#define CQ_ENET_RQ_DESC_RSS_TYPE_TCP_IPv6_EX 6
+
+#define CQ_ENET_RQ_DESC_FLAGS_CSUM_NOT_CALC (0x1 << 14)
+
+#define CQ_ENET_RQ_DESC_BYTES_WRITTEN_BITS 14
+#define CQ_ENET_RQ_DESC_BYTES_WRITTEN_MASK \
+ ((1 << CQ_ENET_RQ_DESC_BYTES_WRITTEN_BITS) - 1)
+#define CQ_ENET_RQ_DESC_FLAGS_TRUNCATED (0x1 << 14)
+#define CQ_ENET_RQ_DESC_FLAGS_VLAN_STRIPPED (0x1 << 15)
+
+#define CQ_ENET_RQ_DESC_FCOE_SOF_BITS 4
+#define CQ_ENET_RQ_DESC_FCOE_SOF_MASK \
+ ((1 << CQ_ENET_RQ_DESC_FCOE_SOF_BITS) - 1)
+#define CQ_ENET_RQ_DESC_FCOE_EOF_BITS 8
+#define CQ_ENET_RQ_DESC_FCOE_EOF_MASK \
+ ((1 << CQ_ENET_RQ_DESC_FCOE_EOF_BITS) - 1)
+#define CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT 8
+
+#define CQ_ENET_RQ_DESC_FLAGS_TCP_UDP_CSUM_OK (0x1 << 0)
+#define CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK (0x1 << 0)
+#define CQ_ENET_RQ_DESC_FLAGS_UDP (0x1 << 1)
+#define CQ_ENET_RQ_DESC_FCOE_ENC_ERROR (0x1 << 1)
+#define CQ_ENET_RQ_DESC_FLAGS_TCP (0x1 << 2)
+#define CQ_ENET_RQ_DESC_FLAGS_IPV4_CSUM_OK (0x1 << 3)
+#define CQ_ENET_RQ_DESC_FLAGS_IPV6 (0x1 << 4)
+#define CQ_ENET_RQ_DESC_FLAGS_IPV4 (0x1 << 5)
+#define CQ_ENET_RQ_DESC_FLAGS_IPV4_FRAGMENT (0x1 << 6)
+#define CQ_ENET_RQ_DESC_FLAGS_FCS_OK (0x1 << 7)
+
+static inline void cq_enet_rq_desc_dec(struct cq_enet_rq_desc *desc,
+ u8 *type, u8 *color, u16 *q_number, u16 *completed_index,
+ u8 *ingress_port, u8 *fcoe, u8 *eop, u8 *sop, u8 *rss_type,
+ u8 *csum_not_calc, u32 *rss_hash, u16 *bytes_written, u8 *packet_error,
+ u8 *vlan_stripped, u16 *vlan, u16 *checksum, u8 *fcoe_sof,
+ u8 *fcoe_fc_crc_ok, u8 *fcoe_enc_error, u8 *fcoe_eof,
+ u8 *tcp_udp_csum_ok, u8 *udp, u8 *tcp, u8 *ipv4_csum_ok,
+ u8 *ipv6, u8 *ipv4, u8 *ipv4_fragment, u8 *fcs_ok)
+{
+ u16 completed_index_flags = le16_to_cpu(desc->completed_index_flags);
+ u16 q_number_rss_type_flags =
+ le16_to_cpu(desc->q_number_rss_type_flags);
+ u16 bytes_written_flags = le16_to_cpu(desc->bytes_written_flags);
+
+ cq_desc_dec((struct cq_desc *)desc, type,
+ color, q_number, completed_index);
+
+ *ingress_port = (completed_index_flags &
+ CQ_ENET_RQ_DESC_FLAGS_INGRESS_PORT) ? 1 : 0;
+ *fcoe = (completed_index_flags & CQ_ENET_RQ_DESC_FLAGS_FCOE) ?
+ 1 : 0;
+ *eop = (completed_index_flags & CQ_ENET_RQ_DESC_FLAGS_EOP) ?
+ 1 : 0;
+ *sop = (completed_index_flags & CQ_ENET_RQ_DESC_FLAGS_SOP) ?
+ 1 : 0;
+
+ *rss_type = (u8)((q_number_rss_type_flags >> CQ_DESC_Q_NUM_BITS) &
+ CQ_ENET_RQ_DESC_RSS_TYPE_MASK);
+ *csum_not_calc = (q_number_rss_type_flags &
+ CQ_ENET_RQ_DESC_FLAGS_CSUM_NOT_CALC) ? 1 : 0;
+
+ *rss_hash = le32_to_cpu(desc->rss_hash);
+
+ *bytes_written = bytes_written_flags &
+ CQ_ENET_RQ_DESC_BYTES_WRITTEN_MASK;
+ *packet_error = (bytes_written_flags &
+ CQ_ENET_RQ_DESC_FLAGS_TRUNCATED) ? 1 : 0;
+ *vlan_stripped = (bytes_written_flags &
+ CQ_ENET_RQ_DESC_FLAGS_VLAN_STRIPPED) ? 1 : 0;
+
+ *vlan = le16_to_cpu(desc->vlan);
+
+ if (*fcoe) {
+ *fcoe_sof = (u8)(le16_to_cpu(desc->checksum_fcoe) &
+ CQ_ENET_RQ_DESC_FCOE_SOF_MASK);
+ *fcoe_fc_crc_ok = (desc->flags &
+ CQ_ENET_RQ_DESC_FCOE_FC_CRC_OK) ? 1 : 0;
+ *fcoe_enc_error = (desc->flags &
+ CQ_ENET_RQ_DESC_FCOE_ENC_ERROR) ? 1 : 0;
+ *fcoe_eof = (u8)((desc->checksum_fcoe >>
+ CQ_ENET_RQ_DESC_FCOE_EOF_SHIFT) &
+ CQ_ENET_RQ_DESC_FCOE_EOF_MASK);
+ *checksum = 0;
+ } else {
+ *fcoe_sof = 0;
+ *fcoe_fc_crc_ok = 0;
+ *fcoe_enc_error = 0;
+ *fcoe_eof = 0;
+ *checksum = le16_to_cpu(desc->checksum_fcoe);
+ }
+
+ *tcp_udp_csum_ok =
+ (desc->flags & CQ_ENET_RQ_DESC_FLAGS_TCP_UDP_CSUM_OK) ? 1 : 0;
+ *udp = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_UDP) ? 1 : 0;
+ *tcp = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_TCP) ? 1 : 0;
+ *ipv4_csum_ok =
+ (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV4_CSUM_OK) ? 1 : 0;
+ *ipv6 = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV6) ? 1 : 0;
+ *ipv4 = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV4) ? 1 : 0;
+ *ipv4_fragment =
+ (desc->flags & CQ_ENET_RQ_DESC_FLAGS_IPV4_FRAGMENT) ? 1 : 0;
+ *fcs_ok = (desc->flags & CQ_ENET_RQ_DESC_FLAGS_FCS_OK) ? 1 : 0;
+}
+
+#endif /* _CQ_ENET_DESC_H_ */
diff --git a/drivers/scsi/fnic/cq_exch_desc.h b/drivers/scsi/fnic/cq_exch_desc.h
new file mode 100644
index 00000000000..501660cfe22
--- /dev/null
+++ b/drivers/scsi/fnic/cq_exch_desc.h
@@ -0,0 +1,182 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _CQ_EXCH_DESC_H_
+#define _CQ_EXCH_DESC_H_
+
+#include "cq_desc.h"
+
+/* Exchange completion queue descriptor: 16B */
+struct cq_exch_wq_desc {
+ u16 completed_index;
+ u16 q_number;
+ u16 exchange_id;
+ u8 tmpl;
+ u8 reserved0;
+ u32 reserved1;
+ u8 exch_status;
+ u8 reserved2[2];
+ u8 type_color;
+};
+
+#define CQ_EXCH_WQ_STATUS_BITS 2
+#define CQ_EXCH_WQ_STATUS_MASK ((1 << CQ_EXCH_WQ_STATUS_BITS) - 1)
+
+enum cq_exch_status_types {
+ CQ_EXCH_WQ_STATUS_TYPE_COMPLETE = 0,
+ CQ_EXCH_WQ_STATUS_TYPE_ABORT = 1,
+ CQ_EXCH_WQ_STATUS_TYPE_SGL_EOF = 2,
+ CQ_EXCH_WQ_STATUS_TYPE_TMPL_ERR = 3,
+};
+
+static inline void cq_exch_wq_desc_dec(struct cq_exch_wq_desc *desc_ptr,
+ u8 *type,
+ u8 *color,
+ u16 *q_number,
+ u16 *completed_index,
+ u8 *exch_status)
+{
+ cq_desc_dec((struct cq_desc *)desc_ptr, type,
+ color, q_number, completed_index);
+ *exch_status = desc_ptr->exch_status & CQ_EXCH_WQ_STATUS_MASK;
+}
+
+struct cq_fcp_rq_desc {
+ u16 completed_index_eop_sop_prt;
+ u16 q_number;
+ u16 exchange_id;
+ u16 tmpl;
+ u16 bytes_written;
+ u16 vlan;
+ u8 sof;
+ u8 eof;
+ u8 fcs_fer_fck;
+ u8 type_color;
+};
+
+#define CQ_FCP_RQ_DESC_FLAGS_SOP (1 << 15)
+#define CQ_FCP_RQ_DESC_FLAGS_EOP (1 << 14)
+#define CQ_FCP_RQ_DESC_FLAGS_PRT (1 << 12)
+#define CQ_FCP_RQ_DESC_TMPL_MASK 0x1f
+#define CQ_FCP_RQ_DESC_BYTES_WRITTEN_MASK 0x3fff
+#define CQ_FCP_RQ_DESC_PACKET_ERR_SHIFT 14
+#define CQ_FCP_RQ_DESC_PACKET_ERR_MASK (1 << CQ_FCP_RQ_DESC_PACKET_ERR_SHIFT)
+#define CQ_FCP_RQ_DESC_VS_STRIPPED_SHIFT 15
+#define CQ_FCP_RQ_DESC_VS_STRIPPED_MASK (1 << CQ_FCP_RQ_DESC_VS_STRIPPED_SHIFT)
+#define CQ_FCP_RQ_DESC_FC_CRC_OK_MASK 0x1
+#define CQ_FCP_RQ_DESC_FCOE_ERR_SHIFT 1
+#define CQ_FCP_RQ_DESC_FCOE_ERR_MASK (1 << CQ_FCP_RQ_DESC_FCOE_ERR_SHIFT)
+#define CQ_FCP_RQ_DESC_FCS_OK_SHIFT 7
+#define CQ_FCP_RQ_DESC_FCS_OK_MASK (1 << CQ_FCP_RQ_DESC_FCS_OK_SHIFT)
+
+static inline void cq_fcp_rq_desc_dec(struct cq_fcp_rq_desc *desc_ptr,
+ u8 *type,
+ u8 *color,
+ u16 *q_number,
+ u16 *completed_index,
+ u8 *eop,
+ u8 *sop,
+ u8 *fck,
+ u16 *exchange_id,
+ u16 *tmpl,
+ u32 *bytes_written,
+ u8 *sof,
+ u8 *eof,
+ u8 *ingress_port,
+ u8 *packet_err,
+ u8 *fcoe_err,
+ u8 *fcs_ok,
+ u8 *vlan_stripped,
+ u16 *vlan)
+{
+ cq_desc_dec((struct cq_desc *)desc_ptr, type,
+ color, q_number, completed_index);
+ *eop = (desc_ptr->completed_index_eop_sop_prt &
+ CQ_FCP_RQ_DESC_FLAGS_EOP) ? 1 : 0;
+ *sop = (desc_ptr->completed_index_eop_sop_prt &
+ CQ_FCP_RQ_DESC_FLAGS_SOP) ? 1 : 0;
+ *ingress_port =
+ (desc_ptr->completed_index_eop_sop_prt &
+ CQ_FCP_RQ_DESC_FLAGS_PRT) ? 1 : 0;
+ *exchange_id = desc_ptr->exchange_id;
+ *tmpl = desc_ptr->tmpl & CQ_FCP_RQ_DESC_TMPL_MASK;
+ *bytes_written =
+ desc_ptr->bytes_written & CQ_FCP_RQ_DESC_BYTES_WRITTEN_MASK;
+ *packet_err =
+ (desc_ptr->bytes_written & CQ_FCP_RQ_DESC_PACKET_ERR_MASK) >>
+ CQ_FCP_RQ_DESC_PACKET_ERR_SHIFT;
+ *vlan_stripped =
+ (desc_ptr->bytes_written & CQ_FCP_RQ_DESC_VS_STRIPPED_MASK) >>
+ CQ_FCP_RQ_DESC_VS_STRIPPED_SHIFT;
+ *vlan = desc_ptr->vlan;
+ *sof = desc_ptr->sof;
+ *fck = desc_ptr->fcs_fer_fck & CQ_FCP_RQ_DESC_FC_CRC_OK_MASK;
+ *fcoe_err = (desc_ptr->fcs_fer_fck & CQ_FCP_RQ_DESC_FCOE_ERR_MASK) >>
+ CQ_FCP_RQ_DESC_FCOE_ERR_SHIFT;
+ *eof = desc_ptr->eof;
+ *fcs_ok =
+ (desc_ptr->fcs_fer_fck & CQ_FCP_RQ_DESC_FCS_OK_MASK) >>
+ CQ_FCP_RQ_DESC_FCS_OK_SHIFT;
+}
+
+struct cq_sgl_desc {
+ u16 exchange_id;
+ u16 q_number;
+ u32 active_burst_offset;
+ u32 tot_data_bytes;
+ u16 tmpl;
+ u8 sgl_err;
+ u8 type_color;
+};
+
+enum cq_sgl_err_types {
+ CQ_SGL_ERR_NO_ERROR = 0,
+ CQ_SGL_ERR_OVERFLOW, /* data ran beyond end of SGL */
+ CQ_SGL_ERR_SGL_LCL_ADDR_ERR, /* sgl access to local vnic addr illegal*/
+ CQ_SGL_ERR_ADDR_RSP_ERR, /* sgl address error */
+ CQ_SGL_ERR_DATA_RSP_ERR, /* sgl data rsp error */
+ CQ_SGL_ERR_CNT_ZERO_ERR, /* SGL count is 0 */
+ CQ_SGL_ERR_CNT_MAX_ERR, /* SGL count is larger than supported */
+ CQ_SGL_ERR_ORDER_ERR, /* frames recv on both ports, order err */
+ CQ_SGL_ERR_DATA_LCL_ADDR_ERR,/* sgl data buf to local vnic addr ill */
+ CQ_SGL_ERR_HOST_CQ_ERR, /* host cq entry to local vnic addr ill */
+};
+
+#define CQ_SGL_SGL_ERR_MASK 0x1f
+#define CQ_SGL_TMPL_MASK 0x1f
+
+static inline void cq_sgl_desc_dec(struct cq_sgl_desc *desc_ptr,
+ u8 *type,
+ u8 *color,
+ u16 *q_number,
+ u16 *exchange_id,
+ u32 *active_burst_offset,
+ u32 *tot_data_bytes,
+ u16 *tmpl,
+ u8 *sgl_err)
+{
+ /* Cheat a little by assuming exchange_id is the same as completed
+ index */
+ cq_desc_dec((struct cq_desc *)desc_ptr, type, color, q_number,
+ exchange_id);
+ *active_burst_offset = desc_ptr->active_burst_offset;
+ *tot_data_bytes = desc_ptr->tot_data_bytes;
+ *tmpl = desc_ptr->tmpl & CQ_SGL_TMPL_MASK;
+ *sgl_err = desc_ptr->sgl_err & CQ_SGL_SGL_ERR_MASK;
+}
+
+#endif /* _CQ_EXCH_DESC_H_ */
diff --git a/drivers/scsi/fnic/fcpio.h b/drivers/scsi/fnic/fcpio.h
new file mode 100644
index 00000000000..12d770d885c
--- /dev/null
+++ b/drivers/scsi/fnic/fcpio.h
@@ -0,0 +1,780 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _FCPIO_H_
+#define _FCPIO_H_
+
+#include <linux/if_ether.h>
+
+/*
+ * This header file includes all of the data structures used for
+ * communication by the host driver to the fcp firmware.
+ */
+
+/*
+ * Exchange and sequence id space allocated to the host driver
+ */
+#define FCPIO_HOST_EXCH_RANGE_START 0x1000
+#define FCPIO_HOST_EXCH_RANGE_END 0x1fff
+#define FCPIO_HOST_SEQ_ID_RANGE_START 0x80
+#define FCPIO_HOST_SEQ_ID_RANGE_END 0xff
+
+/*
+ * Command entry type
+ */
+enum fcpio_type {
+ /*
+ * Initiator request types
+ */
+ FCPIO_ICMND_16 = 0x1,
+ FCPIO_ICMND_32,
+ FCPIO_ICMND_CMPL,
+ FCPIO_ITMF,
+ FCPIO_ITMF_CMPL,
+
+ /*
+ * Target request types
+ */
+ FCPIO_TCMND_16 = 0x11,
+ FCPIO_TCMND_32,
+ FCPIO_TDATA,
+ FCPIO_TXRDY,
+ FCPIO_TRSP,
+ FCPIO_TDRSP_CMPL,
+ FCPIO_TTMF,
+ FCPIO_TTMF_ACK,
+ FCPIO_TABORT,
+ FCPIO_TABORT_CMPL,
+
+ /*
+ * Misc request types
+ */
+ FCPIO_ACK = 0x20,
+ FCPIO_RESET,
+ FCPIO_RESET_CMPL,
+ FCPIO_FLOGI_REG,
+ FCPIO_FLOGI_REG_CMPL,
+ FCPIO_ECHO,
+ FCPIO_ECHO_CMPL,
+ FCPIO_LUNMAP_CHNG,
+ FCPIO_LUNMAP_REQ,
+ FCPIO_LUNMAP_REQ_CMPL,
+ FCPIO_FLOGI_FIP_REG,
+ FCPIO_FLOGI_FIP_REG_CMPL,
+};
+
+/*
+ * Header status codes from the firmware
+ */
+enum fcpio_status {
+ FCPIO_SUCCESS = 0, /* request was successful */
+
+ /*
+ * If a request to the firmware is rejected, the original request
+ * header will be returned with the status set to one of the following:
+ */
+ FCPIO_INVALID_HEADER, /* header contains invalid data */
+ FCPIO_OUT_OF_RESOURCE, /* out of resources to complete request */
+ FCPIO_INVALID_PARAM, /* some parameter in request is invalid */
+ FCPIO_REQ_NOT_SUPPORTED, /* request type is not supported */
+ FCPIO_IO_NOT_FOUND, /* requested I/O was not found */
+
+ /*
+ * Once a request is processed, the firmware will usually return
+ * a cmpl message type. In cases where errors occurred,
+ * the header status field would be filled in with one of the following:
+ */
+ FCPIO_ABORTED = 0x41, /* request was aborted */
+ FCPIO_TIMEOUT, /* request was timed out */
+ FCPIO_SGL_INVALID, /* request was aborted due to sgl error */
+ FCPIO_MSS_INVALID, /* request was aborted due to mss error */
+ FCPIO_DATA_CNT_MISMATCH, /* recv/sent more/less data than exp. */
+ FCPIO_FW_ERR, /* request was terminated due to fw error */
+ FCPIO_ITMF_REJECTED, /* itmf req was rejected by remote node */
+ FCPIO_ITMF_FAILED, /* itmf req was failed by remote node */
+ FCPIO_ITMF_INCORRECT_LUN, /* itmf req targeted incorrect LUN */
+ FCPIO_CMND_REJECTED, /* request was invalid and rejected */
+ FCPIO_NO_PATH_AVAIL, /* no paths to the lun was available */
+ FCPIO_PATH_FAILED, /* i/o sent to current path failed */
+ FCPIO_LUNMAP_CHNG_PEND, /* i/o rejected due to lunmap change */
+};
+
+/*
+ * The header command tag. All host requests will use the "tag" field
+ * to mark commands with a unique tag. When the firmware responds to
+ * a host request, it will copy the tag field into the response.
+ *
+ * The only firmware requests that will use the rx_id/ox_id fields instead
+ * of the tag field will be the target command and target task management
+ * requests. These two requests do not have corresponding host requests
+ * since they come directly from the FC initiator on the network.
+ */
+struct fcpio_tag {
+ union {
+ u32 req_id;
+ struct {
+ u16 rx_id;
+ u16 ox_id;
+ } ex_id;
+ } u;
+};
+
+static inline void
+fcpio_tag_id_enc(struct fcpio_tag *tag, u32 id)
+{
+ tag->u.req_id = id;
+}
+
+static inline void
+fcpio_tag_id_dec(struct fcpio_tag *tag, u32 *id)
+{
+ *id = tag->u.req_id;
+}
+
+static inline void
+fcpio_tag_exid_enc(struct fcpio_tag *tag, u16 ox_id, u16 rx_id)
+{
+ tag->u.ex_id.rx_id = rx_id;
+ tag->u.ex_id.ox_id = ox_id;
+}
+
+static inline void
+fcpio_tag_exid_dec(struct fcpio_tag *tag, u16 *ox_id, u16 *rx_id)
+{
+ *rx_id = tag->u.ex_id.rx_id;
+ *ox_id = tag->u.ex_id.ox_id;
+}
+
+/*
+ * The header for an fcpio request, whether from the firmware or from the
+ * host driver
+ */
+struct fcpio_header {
+ u8 type; /* enum fcpio_type */
+ u8 status; /* header status entry */
+ u16 _resvd; /* reserved */
+ struct fcpio_tag tag; /* header tag */
+};
+
+static inline void
+fcpio_header_enc(struct fcpio_header *hdr,
+ u8 type, u8 status,
+ struct fcpio_tag tag)
+{
+ hdr->type = type;
+ hdr->status = status;
+ hdr->_resvd = 0;
+ hdr->tag = tag;
+}
+
+static inline void
+fcpio_header_dec(struct fcpio_header *hdr,
+ u8 *type, u8 *status,
+ struct fcpio_tag *tag)
+{
+ *type = hdr->type;
+ *status = hdr->status;
+ *tag = hdr->tag;
+}
+
+#define CDB_16 16
+#define CDB_32 32
+#define LUN_ADDRESS 8
+
+/*
+ * fcpio_icmnd_16: host -> firmware request
+ *
+ * used for sending out an initiator SCSI 16-byte command
+ */
+struct fcpio_icmnd_16 {
+ u32 lunmap_id; /* index into lunmap table */
+ u8 special_req_flags; /* special exchange request flags */
+ u8 _resvd0[3]; /* reserved */
+ u32 sgl_cnt; /* scatter-gather list count */
+ u32 sense_len; /* sense buffer length */
+ u64 sgl_addr; /* scatter-gather list addr */
+ u64 sense_addr; /* sense buffer address */
+ u8 crn; /* SCSI Command Reference No. */
+ u8 pri_ta; /* SCSI Priority and Task attribute */
+ u8 _resvd1; /* reserved: should be 0 */
+ u8 flags; /* command flags */
+ u8 scsi_cdb[CDB_16]; /* SCSI Cmnd Descriptor Block */
+ u32 data_len; /* length of data expected */
+ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
+ u8 _resvd2; /* reserved */
+ u8 d_id[3]; /* FC vNIC only: Target D_ID */
+ u16 mss; /* FC vNIC only: max burst */
+ u16 _resvd3; /* reserved */
+ u32 r_a_tov; /* FC vNIC only: Res. Alloc Timeout */
+ u32 e_d_tov; /* FC vNIC only: Err Detect Timeout */
+};
+
+/*
+ * Special request flags
+ */
+#define FCPIO_ICMND_SRFLAG_RETRY 0x01 /* Enable Retry handling on exchange */
+
+/*
+ * Priority/Task Attribute settings
+ */
+#define FCPIO_ICMND_PTA_SIMPLE 0 /* simple task attribute */
+#define FCPIO_ICMND_PTA_HEADQ 1 /* head of queue task attribute */
+#define FCPIO_ICMND_PTA_ORDERED 2 /* ordered task attribute */
+#define FCPIO_ICMND_PTA_ACA 4 /* auto contingent allegiance */
+#define FCPIO_ICMND_PRI_SHIFT 3 /* priority field starts in bit 3 */
+
+/*
+ * Command flags
+ */
+#define FCPIO_ICMND_RDDATA 0x02 /* read data */
+#define FCPIO_ICMND_WRDATA 0x01 /* write data */
+
+/*
+ * fcpio_icmnd_32: host -> firmware request
+ *
+ * used for sending out an initiator SCSI 32-byte command
+ */
+struct fcpio_icmnd_32 {
+ u32 lunmap_id; /* index into lunmap table */
+ u8 special_req_flags; /* special exchange request flags */
+ u8 _resvd0[3]; /* reserved */
+ u32 sgl_cnt; /* scatter-gather list count */
+ u32 sense_len; /* sense buffer length */
+ u64 sgl_addr; /* scatter-gather list addr */
+ u64 sense_addr; /* sense buffer address */
+ u8 crn; /* SCSI Command Reference No. */
+ u8 pri_ta; /* SCSI Priority and Task attribute */
+ u8 _resvd1; /* reserved: should be 0 */
+ u8 flags; /* command flags */
+ u8 scsi_cdb[CDB_32]; /* SCSI Cmnd Descriptor Block */
+ u32 data_len; /* length of data expected */
+ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
+ u8 _resvd2; /* reserved */
+ u8 d_id[3]; /* FC vNIC only: Target D_ID */
+ u16 mss; /* FC vNIC only: max burst */
+ u16 _resvd3; /* reserved */
+ u32 r_a_tov; /* FC vNIC only: Res. Alloc Timeout */
+ u32 e_d_tov; /* FC vNIC only: Error Detect Timeout */
+};
+
+/*
+ * fcpio_itmf: host -> firmware request
+ *
+ * used for requesting the firmware to abort a request and/or send out
+ * a task management function
+ *
+ * The t_tag field is only needed when the request type is ABT_TASK.
+ */
+struct fcpio_itmf {
+ u32 lunmap_id; /* index into lunmap table */
+ u32 tm_req; /* SCSI Task Management request */
+ u32 t_tag; /* header tag of fcpio to be aborted */
+ u32 _resvd; /* _reserved */
+ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
+ u8 _resvd1; /* reserved */
+ u8 d_id[3]; /* FC vNIC only: Target D_ID */
+ u32 r_a_tov; /* FC vNIC only: R_A_TOV in msec */
+ u32 e_d_tov; /* FC vNIC only: E_D_TOV in msec */
+};
+
+/*
+ * Task Management request
+ */
+enum fcpio_itmf_tm_req_type {
+ FCPIO_ITMF_ABT_TASK_TERM = 0x01, /* abort task and terminate */
+ FCPIO_ITMF_ABT_TASK, /* abort task and issue abts */
+ FCPIO_ITMF_ABT_TASK_SET, /* abort task set */
+ FCPIO_ITMF_CLR_TASK_SET, /* clear task set */
+ FCPIO_ITMF_LUN_RESET, /* logical unit reset task mgmt */
+ FCPIO_ITMF_CLR_ACA, /* Clear ACA condition */
+};
+
+/*
+ * fcpio_tdata: host -> firmware request
+ *
+ * used for requesting the firmware to send out a read data transfer for a
+ * target command
+ */
+struct fcpio_tdata {
+ u16 rx_id; /* FC rx_id of target command */
+ u16 flags; /* command flags */
+ u32 rel_offset; /* data sequence relative offset */
+ u32 sgl_cnt; /* scatter-gather list count */
+ u32 data_len; /* length of data expected to send */
+ u64 sgl_addr; /* scatter-gather list address */
+};
+
+/*
+ * Command flags
+ */
+#define FCPIO_TDATA_SCSI_RSP 0x01 /* send a scsi resp. after last frame */
+
+/*
+ * fcpio_txrdy: host -> firmware request
+ *
+ * used for requesting the firmware to send out a write data transfer for a
+ * target command
+ */
+struct fcpio_txrdy {
+ u16 rx_id; /* FC rx_id of target command */
+ u16 _resvd0; /* reserved */
+ u32 rel_offset; /* data sequence relative offset */
+ u32 sgl_cnt; /* scatter-gather list count */
+ u32 data_len; /* length of data expected to send */
+ u64 sgl_addr; /* scatter-gather list address */
+};
+
+/*
+ * fcpio_trsp: host -> firmware request
+ *
+ * used for requesting the firmware to send out a response for a target
+ * command
+ */
+struct fcpio_trsp {
+ u16 rx_id; /* FC rx_id of target command */
+ u16 _resvd0; /* reserved */
+ u32 sense_len; /* sense data buffer length */
+ u64 sense_addr; /* sense data buffer address */
+ u16 _resvd1; /* reserved */
+ u8 flags; /* response request flags */
+ u8 scsi_status; /* SCSI status */
+ u32 residual; /* SCSI data residual value of I/O */
+};
+
+/*
+ * resposnse request flags
+ */
+#define FCPIO_TRSP_RESID_UNDER 0x08 /* residual is valid and is underflow */
+#define FCPIO_TRSP_RESID_OVER 0x04 /* residual is valid and is overflow */
+
+/*
+ * fcpio_ttmf_ack: host -> firmware response
+ *
+ * used by the host to indicate to the firmware it has received and processed
+ * the target tmf request
+ */
+struct fcpio_ttmf_ack {
+ u16 rx_id; /* FC rx_id of target command */
+ u16 _resvd0; /* reserved */
+ u32 tmf_status; /* SCSI task management status */
+};
+
+/*
+ * fcpio_tabort: host -> firmware request
+ *
+ * used by the host to request the firmware to abort a target request that was
+ * received by the firmware
+ */
+struct fcpio_tabort {
+ u16 rx_id; /* rx_id of the target request */
+};
+
+/*
+ * fcpio_reset: host -> firmware request
+ *
+ * used by the host to signal a reset of the driver to the firmware
+ * and to request firmware to clean up all outstanding I/O
+ */
+struct fcpio_reset {
+ u32 _resvd;
+};
+
+enum fcpio_flogi_reg_format_type {
+ FCPIO_FLOGI_REG_DEF_DEST = 0, /* Use the oui | s_id mac format */
+ FCPIO_FLOGI_REG_GW_DEST, /* Use the fixed gateway mac */
+};
+
+/*
+ * fcpio_flogi_reg: host -> firmware request
+ *
+ * fc vnic only
+ * used by the host to notify the firmware of the lif's s_id
+ * and destination mac address format
+ */
+struct fcpio_flogi_reg {
+ u8 format;
+ u8 s_id[3]; /* FC vNIC only: Source S_ID */
+ u8 gateway_mac[ETH_ALEN]; /* Destination gateway mac */
+ u16 _resvd;
+ u32 r_a_tov; /* R_A_TOV in msec */
+ u32 e_d_tov; /* E_D_TOV in msec */
+};
+
+/*
+ * fcpio_echo: host -> firmware request
+ *
+ * sends a heartbeat echo request to the firmware
+ */
+struct fcpio_echo {
+ u32 _resvd;
+};
+
+/*
+ * fcpio_lunmap_req: host -> firmware request
+ *
+ * scsi vnic only
+ * sends a request to retrieve the lunmap table for scsi vnics
+ */
+struct fcpio_lunmap_req {
+ u64 addr; /* address of the buffer */
+ u32 len; /* len of the buffer */
+};
+
+/*
+ * fcpio_flogi_fip_reg: host -> firmware request
+ *
+ * fc vnic only
+ * used by the host to notify the firmware of the lif's s_id
+ * and destination mac address format
+ */
+struct fcpio_flogi_fip_reg {
+ u8 _resvd0;
+ u8 s_id[3]; /* FC vNIC only: Source S_ID */
+ u8 fcf_mac[ETH_ALEN]; /* FCF Target destination mac */
+ u16 _resvd1;
+ u32 r_a_tov; /* R_A_TOV in msec */
+ u32 e_d_tov; /* E_D_TOV in msec */
+ u8 ha_mac[ETH_ALEN]; /* Host adapter source mac */
+ u16 _resvd2;
+};
+
+/*
+ * Basic structure for all fcpio structures that are sent from the host to the
+ * firmware. They are 128 bytes per structure.
+ */
+#define FCPIO_HOST_REQ_LEN 128 /* expected length of host requests */
+
+struct fcpio_host_req {
+ struct fcpio_header hdr;
+
+ union {
+ /*
+ * Defines space needed for request
+ */
+ u8 buf[FCPIO_HOST_REQ_LEN - sizeof(struct fcpio_header)];
+
+ /*
+ * Initiator host requests
+ */
+ struct fcpio_icmnd_16 icmnd_16;
+ struct fcpio_icmnd_32 icmnd_32;
+ struct fcpio_itmf itmf;
+
+ /*
+ * Target host requests
+ */
+ struct fcpio_tdata tdata;
+ struct fcpio_txrdy txrdy;
+ struct fcpio_trsp trsp;
+ struct fcpio_ttmf_ack ttmf_ack;
+ struct fcpio_tabort tabort;
+
+ /*
+ * Misc requests
+ */
+ struct fcpio_reset reset;
+ struct fcpio_flogi_reg flogi_reg;
+ struct fcpio_echo echo;
+ struct fcpio_lunmap_req lunmap_req;
+ struct fcpio_flogi_fip_reg flogi_fip_reg;
+ } u;
+};
+
+/*
+ * fcpio_icmnd_cmpl: firmware -> host response
+ *
+ * used for sending the host a response to an initiator command
+ */
+struct fcpio_icmnd_cmpl {
+ u8 _resvd0[6]; /* reserved */
+ u8 flags; /* response flags */
+ u8 scsi_status; /* SCSI status */
+ u32 residual; /* SCSI data residual length */
+ u32 sense_len; /* SCSI sense length */
+};
+
+/*
+ * response flags
+ */
+#define FCPIO_ICMND_CMPL_RESID_UNDER 0x08 /* resid under and valid */
+#define FCPIO_ICMND_CMPL_RESID_OVER 0x04 /* resid over and valid */
+
+/*
+ * fcpio_itmf_cmpl: firmware -> host response
+ *
+ * used for sending the host a response for a itmf request
+ */
+struct fcpio_itmf_cmpl {
+ u32 _resvd; /* reserved */
+};
+
+/*
+ * fcpio_tcmnd_16: firmware -> host request
+ *
+ * used by the firmware to notify the host of an incoming target SCSI 16-Byte
+ * request
+ */
+struct fcpio_tcmnd_16 {
+ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
+ u8 crn; /* SCSI Command Reference No. */
+ u8 pri_ta; /* SCSI Priority and Task attribute */
+ u8 _resvd2; /* reserved: should be 0 */
+ u8 flags; /* command flags */
+ u8 scsi_cdb[CDB_16]; /* SCSI Cmnd Descriptor Block */
+ u32 data_len; /* length of data expected */
+ u8 _resvd1; /* reserved */
+ u8 s_id[3]; /* FC vNIC only: Source S_ID */
+};
+
+/*
+ * Priority/Task Attribute settings
+ */
+#define FCPIO_TCMND_PTA_SIMPLE 0 /* simple task attribute */
+#define FCPIO_TCMND_PTA_HEADQ 1 /* head of queue task attribute */
+#define FCPIO_TCMND_PTA_ORDERED 2 /* ordered task attribute */
+#define FCPIO_TCMND_PTA_ACA 4 /* auto contingent allegiance */
+#define FCPIO_TCMND_PRI_SHIFT 3 /* priority field starts in bit 3 */
+
+/*
+ * Command flags
+ */
+#define FCPIO_TCMND_RDDATA 0x02 /* read data */
+#define FCPIO_TCMND_WRDATA 0x01 /* write data */
+
+/*
+ * fcpio_tcmnd_32: firmware -> host request
+ *
+ * used by the firmware to notify the host of an incoming target SCSI 32-Byte
+ * request
+ */
+struct fcpio_tcmnd_32 {
+ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
+ u8 crn; /* SCSI Command Reference No. */
+ u8 pri_ta; /* SCSI Priority and Task attribute */
+ u8 _resvd2; /* reserved: should be 0 */
+ u8 flags; /* command flags */
+ u8 scsi_cdb[CDB_32]; /* SCSI Cmnd Descriptor Block */
+ u32 data_len; /* length of data expected */
+ u8 _resvd0; /* reserved */
+ u8 s_id[3]; /* FC vNIC only: Source S_ID */
+};
+
+/*
+ * fcpio_tdrsp_cmpl: firmware -> host response
+ *
+ * used by the firmware to notify the host of a response to a host target
+ * command
+ */
+struct fcpio_tdrsp_cmpl {
+ u16 rx_id; /* rx_id of the target request */
+ u16 _resvd0; /* reserved */
+};
+
+/*
+ * fcpio_ttmf: firmware -> host request
+ *
+ * used by the firmware to notify the host of an incoming task management
+ * function request
+ */
+struct fcpio_ttmf {
+ u8 _resvd0; /* reserved */
+ u8 s_id[3]; /* FC vNIC only: Source S_ID */
+ u8 lun[LUN_ADDRESS]; /* FC vNIC only: LUN address */
+ u8 crn; /* SCSI Command Reference No. */
+ u8 _resvd2[3]; /* reserved */
+ u32 tmf_type; /* task management request type */
+};
+
+/*
+ * Task Management request
+ */
+#define FCPIO_TTMF_CLR_ACA 0x40 /* Clear ACA condition */
+#define FCPIO_TTMF_LUN_RESET 0x10 /* logical unit reset task mgmt */
+#define FCPIO_TTMF_CLR_TASK_SET 0x04 /* clear task set */
+#define FCPIO_TTMF_ABT_TASK_SET 0x02 /* abort task set */
+#define FCPIO_TTMF_ABT_TASK 0x01 /* abort task */
+
+/*
+ * fcpio_tabort_cmpl: firmware -> host response
+ *
+ * used by the firmware to respond to a host's tabort request
+ */
+struct fcpio_tabort_cmpl {
+ u16 rx_id; /* rx_id of the target request */
+ u16 _resvd0; /* reserved */
+};
+
+/*
+ * fcpio_ack: firmware -> host response
+ *
+ * used by firmware to notify the host of the last work request received
+ */
+struct fcpio_ack {
+ u16 request_out; /* last host entry received */
+ u16 _resvd;
+};
+
+/*
+ * fcpio_reset_cmpl: firmware -> host response
+ *
+ * use by firmware to respond to the host's reset request
+ */
+struct fcpio_reset_cmpl {
+ u16 vnic_id;
+};
+
+/*
+ * fcpio_flogi_reg_cmpl: firmware -> host response
+ *
+ * fc vnic only
+ * response to the fcpio_flogi_reg request
+ */
+struct fcpio_flogi_reg_cmpl {
+ u32 _resvd;
+};
+
+/*
+ * fcpio_echo_cmpl: firmware -> host response
+ *
+ * response to the fcpio_echo request
+ */
+struct fcpio_echo_cmpl {
+ u32 _resvd;
+};
+
+/*
+ * fcpio_lunmap_chng: firmware -> host notification
+ *
+ * scsi vnic only
+ * notifies the host that the lunmap tables have changed
+ */
+struct fcpio_lunmap_chng {
+ u32 _resvd;
+};
+
+/*
+ * fcpio_lunmap_req_cmpl: firmware -> host response
+ *
+ * scsi vnic only
+ * response for lunmap table request from the host
+ */
+struct fcpio_lunmap_req_cmpl {
+ u32 _resvd;
+};
+
+/*
+ * Basic structure for all fcpio structures that are sent from the firmware to
+ * the host. They are 64 bytes per structure.
+ */
+#define FCPIO_FW_REQ_LEN 64 /* expected length of fw requests */
+struct fcpio_fw_req {
+ struct fcpio_header hdr;
+
+ union {
+ /*
+ * Defines space needed for request
+ */
+ u8 buf[FCPIO_FW_REQ_LEN - sizeof(struct fcpio_header)];
+
+ /*
+ * Initiator firmware responses
+ */
+ struct fcpio_icmnd_cmpl icmnd_cmpl;
+ struct fcpio_itmf_cmpl itmf_cmpl;
+
+ /*
+ * Target firmware new requests
+ */
+ struct fcpio_tcmnd_16 tcmnd_16;
+ struct fcpio_tcmnd_32 tcmnd_32;
+
+ /*
+ * Target firmware responses
+ */
+ struct fcpio_tdrsp_cmpl tdrsp_cmpl;
+ struct fcpio_ttmf ttmf;
+ struct fcpio_tabort_cmpl tabort_cmpl;
+
+ /*
+ * Firmware response to work received
+ */
+ struct fcpio_ack ack;
+
+ /*
+ * Misc requests
+ */
+ struct fcpio_reset_cmpl reset_cmpl;
+ struct fcpio_flogi_reg_cmpl flogi_reg_cmpl;
+ struct fcpio_echo_cmpl echo_cmpl;
+ struct fcpio_lunmap_chng lunmap_chng;
+ struct fcpio_lunmap_req_cmpl lunmap_req_cmpl;
+ } u;
+};
+
+/*
+ * Access routines to encode and decode the color bit, which is the most
+ * significant bit of the MSB of the structure
+ */
+static inline void fcpio_color_enc(struct fcpio_fw_req *fw_req, u8 color)
+{
+ u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1;
+
+ if (color)
+ *c |= 0x80;
+ else
+ *c &= ~0x80;
+}
+
+static inline void fcpio_color_dec(struct fcpio_fw_req *fw_req, u8 *color)
+{
+ u8 *c = ((u8 *) fw_req) + sizeof(struct fcpio_fw_req) - 1;
+
+ *color = *c >> 7;
+
+ /*
+ * Make sure color bit is read from desc *before* other fields
+ * are read from desc. Hardware guarantees color bit is last
+ * bit (byte) written. Adding the rmb() prevents the compiler
+ * and/or CPU from reordering the reads which would potentially
+ * result in reading stale values.
+ */
+
+ rmb();
+
+}
+
+/*
+ * Lunmap table entry for scsi vnics
+ */
+#define FCPIO_LUNMAP_TABLE_SIZE 256
+#define FCPIO_FLAGS_LUNMAP_VALID 0x80
+#define FCPIO_FLAGS_BOOT 0x01
+struct fcpio_lunmap_entry {
+ u8 bus;
+ u8 target;
+ u8 lun;
+ u8 path_cnt;
+ u16 flags;
+ u16 update_cnt;
+};
+
+struct fcpio_lunmap_tbl {
+ u32 update_cnt;
+ struct fcpio_lunmap_entry lunmaps[FCPIO_LUNMAP_TABLE_SIZE];
+};
+
+#endif /* _FCPIO_H_ */
diff --git a/drivers/scsi/fnic/fnic.h b/drivers/scsi/fnic/fnic.h
new file mode 100644
index 00000000000..e4c0a3d7d87
--- /dev/null
+++ b/drivers/scsi/fnic/fnic.h
@@ -0,0 +1,265 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _FNIC_H_
+#define _FNIC_H_
+
+#include <linux/interrupt.h>
+#include <linux/netdevice.h>
+#include <linux/workqueue.h>
+#include <scsi/libfc.h>
+#include "fnic_io.h"
+#include "fnic_res.h"
+#include "vnic_dev.h"
+#include "vnic_wq.h"
+#include "vnic_rq.h"
+#include "vnic_cq.h"
+#include "vnic_wq_copy.h"
+#include "vnic_intr.h"
+#include "vnic_stats.h"
+#include "vnic_scsi.h"
+
+#define DRV_NAME "fnic"
+#define DRV_DESCRIPTION "Cisco FCoE HBA Driver"
+#define DRV_VERSION "1.0.0.1121"
+#define PFX DRV_NAME ": "
+#define DFX DRV_NAME "%d: "
+
+#define DESC_CLEAN_LOW_WATERMARK 8
+#define FNIC_MAX_IO_REQ 2048 /* scsi_cmnd tag map entries */
+#define FNIC_IO_LOCKS 64 /* IO locks: power of 2 */
+#define FNIC_DFLT_QUEUE_DEPTH 32
+#define FNIC_STATS_RATE_LIMIT 4 /* limit rate at which stats are pulled up */
+
+/*
+ * Tag bits used for special requests.
+ */
+#define BIT(nr) (1UL << (nr))
+#define FNIC_TAG_ABORT BIT(30) /* tag bit indicating abort */
+#define FNIC_TAG_DEV_RST BIT(29) /* indicates device reset */
+#define FNIC_TAG_MASK (BIT(24) - 1) /* mask for lookup */
+#define FNIC_NO_TAG -1
+
+/*
+ * Usage of the scsi_cmnd scratchpad.
+ * These fields are locked by the hashed io_req_lock.
+ */
+#define CMD_SP(Cmnd) ((Cmnd)->SCp.ptr)
+#define CMD_STATE(Cmnd) ((Cmnd)->SCp.phase)
+#define CMD_ABTS_STATUS(Cmnd) ((Cmnd)->SCp.Message)
+#define CMD_LR_STATUS(Cmnd) ((Cmnd)->SCp.have_data_in)
+#define CMD_TAG(Cmnd) ((Cmnd)->SCp.sent_command)
+
+#define FCPIO_INVALID_CODE 0x100 /* hdr_status value unused by firmware */
+
+#define FNIC_LUN_RESET_TIMEOUT 10000 /* mSec */
+#define FNIC_HOST_RESET_TIMEOUT 10000 /* mSec */
+#define FNIC_RMDEVICE_TIMEOUT 1000 /* mSec */
+#define FNIC_HOST_RESET_SETTLE_TIME 30 /* Sec */
+
+#define FNIC_MAX_FCP_TARGET 256
+
+extern unsigned int fnic_log_level;
+
+#define FNIC_MAIN_LOGGING 0x01
+#define FNIC_FCS_LOGGING 0x02
+#define FNIC_SCSI_LOGGING 0x04
+#define FNIC_ISR_LOGGING 0x08
+
+#define FNIC_CHECK_LOGGING(LEVEL, CMD) \
+do { \
+ if (unlikely(fnic_log_level & LEVEL)) \
+ do { \
+ CMD; \
+ } while (0); \
+} while (0)
+
+#define FNIC_MAIN_DBG(kern_level, host, fmt, args...) \
+ FNIC_CHECK_LOGGING(FNIC_MAIN_LOGGING, \
+ shost_printk(kern_level, host, fmt, ##args);)
+
+#define FNIC_FCS_DBG(kern_level, host, fmt, args...) \
+ FNIC_CHECK_LOGGING(FNIC_FCS_LOGGING, \
+ shost_printk(kern_level, host, fmt, ##args);)
+
+#define FNIC_SCSI_DBG(kern_level, host, fmt, args...) \
+ FNIC_CHECK_LOGGING(FNIC_SCSI_LOGGING, \
+ shost_printk(kern_level, host, fmt, ##args);)
+
+#define FNIC_ISR_DBG(kern_level, host, fmt, args...) \
+ FNIC_CHECK_LOGGING(FNIC_ISR_LOGGING, \
+ shost_printk(kern_level, host, fmt, ##args);)
+
+extern const char *fnic_state_str[];
+
+enum fnic_intx_intr_index {
+ FNIC_INTX_WQ_RQ_COPYWQ,
+ FNIC_INTX_ERR,
+ FNIC_INTX_NOTIFY,
+ FNIC_INTX_INTR_MAX,
+};
+
+enum fnic_msix_intr_index {
+ FNIC_MSIX_RQ,
+ FNIC_MSIX_WQ,
+ FNIC_MSIX_WQ_COPY,
+ FNIC_MSIX_ERR_NOTIFY,
+ FNIC_MSIX_INTR_MAX,
+};
+
+struct fnic_msix_entry {
+ int requested;
+ char devname[IFNAMSIZ];
+ irqreturn_t (*isr)(int, void *);
+ void *devid;
+};
+
+enum fnic_state {
+ FNIC_IN_FC_MODE = 0,
+ FNIC_IN_FC_TRANS_ETH_MODE,
+ FNIC_IN_ETH_MODE,
+ FNIC_IN_ETH_TRANS_FC_MODE,
+};
+
+#define FNIC_WQ_COPY_MAX 1
+#define FNIC_WQ_MAX 1
+#define FNIC_RQ_MAX 1
+#define FNIC_CQ_MAX (FNIC_WQ_COPY_MAX + FNIC_WQ_MAX + FNIC_RQ_MAX)
+
+struct mempool;
+
+/* Per-instance private data structure */
+struct fnic {
+ struct fc_lport *lport;
+ struct vnic_dev_bar bar0;
+
+ struct msix_entry msix_entry[FNIC_MSIX_INTR_MAX];
+ struct fnic_msix_entry msix[FNIC_MSIX_INTR_MAX];
+
+ struct vnic_stats *stats;
+ unsigned long stats_time; /* time of stats update */
+ struct vnic_nic_cfg *nic_cfg;
+ char name[IFNAMSIZ];
+ struct timer_list notify_timer; /* used for MSI interrupts */
+
+ unsigned int err_intr_offset;
+ unsigned int link_intr_offset;
+
+ unsigned int wq_count;
+ unsigned int cq_count;
+
+ u32 fcoui_mode:1; /* use fcoui address*/
+ u32 vlan_hw_insert:1; /* let hw insert the tag */
+ u32 in_remove:1; /* fnic device in removal */
+ u32 stop_rx_link_events:1; /* stop proc. rx frames, link events */
+
+ struct completion *remove_wait; /* device remove thread blocks */
+
+ struct fc_frame *flogi;
+ struct fc_frame *flogi_resp;
+ u16 flogi_oxid;
+ unsigned long s_id;
+ enum fnic_state state;
+ spinlock_t fnic_lock;
+
+ u16 vlan_id; /* VLAN tag including priority */
+ u8 mac_addr[ETH_ALEN];
+ u8 dest_addr[ETH_ALEN];
+ u8 data_src_addr[ETH_ALEN];
+ u64 fcp_input_bytes; /* internal statistic */
+ u64 fcp_output_bytes; /* internal statistic */
+ u32 link_down_cnt;
+ int link_status;
+
+ struct list_head list;
+ struct pci_dev *pdev;
+ struct vnic_fc_config config;
+ struct vnic_dev *vdev;
+ unsigned int raw_wq_count;
+ unsigned int wq_copy_count;
+ unsigned int rq_count;
+ int fw_ack_index[FNIC_WQ_COPY_MAX];
+ unsigned short fw_ack_recd[FNIC_WQ_COPY_MAX];
+ unsigned short wq_copy_desc_low[FNIC_WQ_COPY_MAX];
+ unsigned int intr_count;
+ u32 __iomem *legacy_pba;
+ struct fnic_host_tag *tags;
+ mempool_t *io_req_pool;
+ mempool_t *io_sgl_pool[FNIC_SGL_NUM_CACHES];
+ spinlock_t io_req_lock[FNIC_IO_LOCKS]; /* locks for scsi cmnds */
+
+ struct work_struct link_work;
+ struct work_struct frame_work;
+ struct sk_buff_head frame_queue;
+
+ /* copy work queue cache line section */
+ ____cacheline_aligned struct vnic_wq_copy wq_copy[FNIC_WQ_COPY_MAX];
+ /* completion queue cache line section */
+ ____cacheline_aligned struct vnic_cq cq[FNIC_CQ_MAX];
+
+ spinlock_t wq_copy_lock[FNIC_WQ_COPY_MAX];
+
+ /* work queue cache line section */
+ ____cacheline_aligned struct vnic_wq wq[FNIC_WQ_MAX];
+ spinlock_t wq_lock[FNIC_WQ_MAX];
+
+ /* receive queue cache line section */
+ ____cacheline_aligned struct vnic_rq rq[FNIC_RQ_MAX];
+
+ /* interrupt resource cache line section */
+ ____cacheline_aligned struct vnic_intr intr[FNIC_MSIX_INTR_MAX];
+};
+
+extern struct workqueue_struct *fnic_event_queue;
+extern struct device_attribute *fnic_attrs[];
+
+void fnic_clear_intr_mode(struct fnic *fnic);
+int fnic_set_intr_mode(struct fnic *fnic);
+void fnic_free_intr(struct fnic *fnic);
+int fnic_request_intr(struct fnic *fnic);
+
+int fnic_send(struct fc_lport *, struct fc_frame *);
+void fnic_free_wq_buf(struct vnic_wq *wq, struct vnic_wq_buf *buf);
+void fnic_handle_frame(struct work_struct *work);
+void fnic_handle_link(struct work_struct *work);
+int fnic_rq_cmpl_handler(struct fnic *fnic, int);
+int fnic_alloc_rq_frame(struct vnic_rq *rq);
+void fnic_free_rq_buf(struct vnic_rq *rq, struct vnic_rq_buf *buf);
+int fnic_send_frame(struct fnic *fnic, struct fc_frame *fp);
+
+int fnic_queuecommand(struct scsi_cmnd *, void (*done)(struct scsi_cmnd *));
+int fnic_abort_cmd(struct scsi_cmnd *);
+int fnic_device_reset(struct scsi_cmnd *);
+int fnic_host_reset(struct scsi_cmnd *);
+int fnic_reset(struct Scsi_Host *);
+void fnic_scsi_cleanup(struct fc_lport *);
+void fnic_scsi_abort_io(struct fc_lport *);
+void fnic_empty_scsi_cleanup(struct fc_lport *);
+void fnic_exch_mgr_reset(struct fc_lport *, u32, u32);
+int fnic_wq_copy_cmpl_handler(struct fnic *fnic, int);
+int fnic_wq_cmpl_handler(struct fnic *fnic, int);
+int fnic_flogi_reg_handler(struct fnic *fnic);
+void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq,
+ struct fcpio_host_req *desc);
+int fnic_fw_reset_handler(struct fnic *fnic);
+void fnic_terminate_rport_io(struct fc_rport *);
+const char *fnic_state_to_str(unsigned int state);
+
+void fnic_log_q_error(struct fnic *fnic);
+void fnic_handle_link_event(struct fnic *fnic);
+
+#endif /* _FNIC_H_ */
diff --git a/drivers/scsi/fnic/fnic_attrs.c b/drivers/scsi/fnic/fnic_attrs.c
new file mode 100644
index 00000000000..aea0c3becfd
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_attrs.c
@@ -0,0 +1,56 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/string.h>
+#include <linux/device.h>
+#include <scsi/scsi_host.h>
+#include "fnic.h"
+
+static ssize_t fnic_show_state(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fc_lport *lp = shost_priv(class_to_shost(dev));
+ struct fnic *fnic = lport_priv(lp);
+
+ return snprintf(buf, PAGE_SIZE, "%s\n", fnic_state_str[fnic->state]);
+}
+
+static ssize_t fnic_show_drv_version(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ return snprintf(buf, PAGE_SIZE, "%s\n", DRV_VERSION);
+}
+
+static ssize_t fnic_show_link_state(struct device *dev,
+ struct device_attribute *attr, char *buf)
+{
+ struct fc_lport *lp = shost_priv(class_to_shost(dev));
+
+ return snprintf(buf, PAGE_SIZE, "%s\n", (lp->link_up)
+ ? "Link Up" : "Link Down");
+}
+
+static DEVICE_ATTR(fnic_state, S_IRUGO, fnic_show_state, NULL);
+static DEVICE_ATTR(drv_version, S_IRUGO, fnic_show_drv_version, NULL);
+static DEVICE_ATTR(link_state, S_IRUGO, fnic_show_link_state, NULL);
+
+struct device_attribute *fnic_attrs[] = {
+ &dev_attr_fnic_state,
+ &dev_attr_drv_version,
+ &dev_attr_link_state,
+ NULL,
+};
diff --git a/drivers/scsi/fnic/fnic_fcs.c b/drivers/scsi/fnic/fnic_fcs.c
new file mode 100644
index 00000000000..07e6eedb83c
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_fcs.c
@@ -0,0 +1,742 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/skbuff.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/workqueue.h>
+#include <scsi/fc/fc_els.h>
+#include <scsi/fc/fc_fcoe.h>
+#include <scsi/fc_frame.h>
+#include <scsi/libfc.h>
+#include "fnic_io.h"
+#include "fnic.h"
+#include "cq_enet_desc.h"
+#include "cq_exch_desc.h"
+
+struct workqueue_struct *fnic_event_queue;
+
+void fnic_handle_link(struct work_struct *work)
+{
+ struct fnic *fnic = container_of(work, struct fnic, link_work);
+ unsigned long flags;
+ int old_link_status;
+ u32 old_link_down_cnt;
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+
+ if (fnic->stop_rx_link_events) {
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ return;
+ }
+
+ old_link_down_cnt = fnic->link_down_cnt;
+ old_link_status = fnic->link_status;
+ fnic->link_status = vnic_dev_link_status(fnic->vdev);
+ fnic->link_down_cnt = vnic_dev_link_down_cnt(fnic->vdev);
+
+ if (old_link_status == fnic->link_status) {
+ if (!fnic->link_status)
+ /* DOWN -> DOWN */
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ else {
+ if (old_link_down_cnt != fnic->link_down_cnt) {
+ /* UP -> DOWN -> UP */
+ fnic->lport->host_stats.link_failure_count++;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+ "link down\n");
+ fc_linkdown(fnic->lport);
+ FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+ "link up\n");
+ fc_linkup(fnic->lport);
+ } else
+ /* UP -> UP */
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ }
+ } else if (fnic->link_status) {
+ /* DOWN -> UP */
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, "link up\n");
+ fc_linkup(fnic->lport);
+ } else {
+ /* UP -> DOWN */
+ fnic->lport->host_stats.link_failure_count++;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host, "link down\n");
+ fc_linkdown(fnic->lport);
+ }
+
+}
+
+/*
+ * This function passes incoming fabric frames to libFC
+ */
+void fnic_handle_frame(struct work_struct *work)
+{
+ struct fnic *fnic = container_of(work, struct fnic, frame_work);
+ struct fc_lport *lp = fnic->lport;
+ unsigned long flags;
+ struct sk_buff *skb;
+ struct fc_frame *fp;
+
+ while ((skb = skb_dequeue(&fnic->frame_queue))) {
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ if (fnic->stop_rx_link_events) {
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ dev_kfree_skb(skb);
+ return;
+ }
+ fp = (struct fc_frame *)skb;
+ /* if Flogi resp frame, register the address */
+ if (fr_flags(fp)) {
+ vnic_dev_add_addr(fnic->vdev,
+ fnic->data_src_addr);
+ fr_flags(fp) = 0;
+ }
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ fc_exch_recv(lp, lp->emp, fp);
+ }
+
+}
+
+static inline void fnic_import_rq_fc_frame(struct sk_buff *skb,
+ u32 len, u8 sof, u8 eof)
+{
+ struct fc_frame *fp = (struct fc_frame *)skb;
+
+ skb_trim(skb, len);
+ fr_eof(fp) = eof;
+ fr_sof(fp) = sof;
+}
+
+
+static inline int fnic_import_rq_eth_pkt(struct sk_buff *skb, u32 len)
+{
+ struct fc_frame *fp;
+ struct ethhdr *eh;
+ struct vlan_ethhdr *vh;
+ struct fcoe_hdr *fcoe_hdr;
+ struct fcoe_crc_eof *ft;
+ u32 transport_len = 0;
+
+ eh = (struct ethhdr *)skb->data;
+ vh = (struct vlan_ethhdr *)skb->data;
+ if (vh->h_vlan_proto == htons(ETH_P_8021Q) &&
+ vh->h_vlan_encapsulated_proto == htons(ETH_P_FCOE)) {
+ skb_pull(skb, sizeof(struct vlan_ethhdr));
+ transport_len += sizeof(struct vlan_ethhdr);
+ } else if (eh->h_proto == htons(ETH_P_FCOE)) {
+ transport_len += sizeof(struct ethhdr);
+ skb_pull(skb, sizeof(struct ethhdr));
+ } else
+ return -1;
+
+ fcoe_hdr = (struct fcoe_hdr *)skb->data;
+ if (FC_FCOE_DECAPS_VER(fcoe_hdr) != FC_FCOE_VER)
+ return -1;
+
+ fp = (struct fc_frame *)skb;
+ fc_frame_init(fp);
+ fr_sof(fp) = fcoe_hdr->fcoe_sof;
+ skb_pull(skb, sizeof(struct fcoe_hdr));
+ transport_len += sizeof(struct fcoe_hdr);
+
+ ft = (struct fcoe_crc_eof *)(skb->data + len -
+ transport_len - sizeof(*ft));
+ fr_eof(fp) = ft->fcoe_eof;
+ skb_trim(skb, len - transport_len - sizeof(*ft));
+ return 0;
+}
+
+static inline int fnic_handle_flogi_resp(struct fnic *fnic,
+ struct fc_frame *fp)
+{
+ u8 mac[ETH_ALEN] = FC_FCOE_FLOGI_MAC;
+ struct ethhdr *eth_hdr;
+ struct fc_frame_header *fh;
+ int ret = 0;
+ unsigned long flags;
+ struct fc_frame *old_flogi_resp = NULL;
+
+ fh = (struct fc_frame_header *)fr_hdr(fp);
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+
+ if (fnic->state == FNIC_IN_ETH_MODE) {
+
+ /*
+ * Check if oxid matches on taking the lock. A new Flogi
+ * issued by libFC might have changed the fnic cached oxid
+ */
+ if (fnic->flogi_oxid != ntohs(fh->fh_ox_id)) {
+ FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+ "Flogi response oxid not"
+ " matching cached oxid, dropping frame"
+ "\n");
+ ret = -1;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ dev_kfree_skb_irq(fp_skb(fp));
+ goto handle_flogi_resp_end;
+ }
+
+ /* Drop older cached flogi response frame, cache this frame */
+ old_flogi_resp = fnic->flogi_resp;
+ fnic->flogi_resp = fp;
+ fnic->flogi_oxid = FC_XID_UNKNOWN;
+
+ /*
+ * this frame is part of flogi get the src mac addr from this
+ * frame if the src mac is fcoui based then we mark the
+ * address mode flag to use fcoui base for dst mac addr
+ * otherwise we have to store the fcoe gateway addr
+ */
+ eth_hdr = (struct ethhdr *)skb_mac_header(fp_skb(fp));
+ memcpy(mac, eth_hdr->h_source, ETH_ALEN);
+
+ if (ntoh24(mac) == FC_FCOE_OUI)
+ fnic->fcoui_mode = 1;
+ else {
+ fnic->fcoui_mode = 0;
+ memcpy(fnic->dest_addr, mac, ETH_ALEN);
+ }
+
+ /*
+ * Except for Flogi frame, all outbound frames from us have the
+ * Eth Src address as FC_FCOE_OUI"our_sid". Flogi frame uses
+ * the vnic MAC address as the Eth Src address
+ */
+ fc_fcoe_set_mac(fnic->data_src_addr, fh->fh_d_id);
+
+ /* We get our s_id from the d_id of the flogi resp frame */
+ fnic->s_id = ntoh24(fh->fh_d_id);
+
+ /* Change state to reflect transition from Eth to FC mode */
+ fnic->state = FNIC_IN_ETH_TRANS_FC_MODE;
+
+ } else {
+ FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+ "Unexpected fnic state %s while"
+ " processing flogi resp\n",
+ fnic_state_to_str(fnic->state));
+ ret = -1;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ dev_kfree_skb_irq(fp_skb(fp));
+ goto handle_flogi_resp_end;
+ }
+
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ /* Drop older cached frame */
+ if (old_flogi_resp)
+ dev_kfree_skb_irq(fp_skb(old_flogi_resp));
+
+ /*
+ * send flogi reg request to firmware, this will put the fnic in
+ * in FC mode
+ */
+ ret = fnic_flogi_reg_handler(fnic);
+
+ if (ret < 0) {
+ int free_fp = 1;
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ /*
+ * free the frame is some other thread is not
+ * pointing to it
+ */
+ if (fnic->flogi_resp != fp)
+ free_fp = 0;
+ else
+ fnic->flogi_resp = NULL;
+
+ if (fnic->state == FNIC_IN_ETH_TRANS_FC_MODE)
+ fnic->state = FNIC_IN_ETH_MODE;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ if (free_fp)
+ dev_kfree_skb_irq(fp_skb(fp));
+ }
+
+ handle_flogi_resp_end:
+ return ret;
+}
+
+/* Returns 1 for a response that matches cached flogi oxid */
+static inline int is_matching_flogi_resp_frame(struct fnic *fnic,
+ struct fc_frame *fp)
+{
+ struct fc_frame_header *fh;
+ int ret = 0;
+ u32 f_ctl;
+
+ fh = fc_frame_header_get(fp);
+ f_ctl = ntoh24(fh->fh_f_ctl);
+
+ if (fnic->flogi_oxid == ntohs(fh->fh_ox_id) &&
+ fh->fh_r_ctl == FC_RCTL_ELS_REP &&
+ (f_ctl & (FC_FC_EX_CTX | FC_FC_SEQ_CTX)) == FC_FC_EX_CTX &&
+ fh->fh_type == FC_TYPE_ELS)
+ ret = 1;
+
+ return ret;
+}
+
+static void fnic_rq_cmpl_frame_recv(struct vnic_rq *rq, struct cq_desc
+ *cq_desc, struct vnic_rq_buf *buf,
+ int skipped __attribute__((unused)),
+ void *opaque)
+{
+ struct fnic *fnic = vnic_dev_priv(rq->vdev);
+ struct sk_buff *skb;
+ struct fc_frame *fp;
+ unsigned int eth_hdrs_stripped;
+ u8 type, color, eop, sop, ingress_port, vlan_stripped;
+ u8 fcoe = 0, fcoe_sof, fcoe_eof;
+ u8 fcoe_fc_crc_ok = 1, fcoe_enc_error = 0;
+ u8 tcp_udp_csum_ok, udp, tcp, ipv4_csum_ok;
+ u8 ipv6, ipv4, ipv4_fragment, rss_type, csum_not_calc;
+ u8 fcs_ok = 1, packet_error = 0;
+ u16 q_number, completed_index, bytes_written = 0, vlan, checksum;
+ u32 rss_hash;
+ u16 exchange_id, tmpl;
+ u8 sof = 0;
+ u8 eof = 0;
+ u32 fcp_bytes_written = 0;
+ unsigned long flags;
+
+ pci_unmap_single(fnic->pdev, buf->dma_addr, buf->len,
+ PCI_DMA_FROMDEVICE);
+ skb = buf->os_buf;
+ buf->os_buf = NULL;
+
+ cq_desc_dec(cq_desc, &type, &color, &q_number, &completed_index);
+ if (type == CQ_DESC_TYPE_RQ_FCP) {
+ cq_fcp_rq_desc_dec((struct cq_fcp_rq_desc *)cq_desc,
+ &type, &color, &q_number, &completed_index,
+ &eop, &sop, &fcoe_fc_crc_ok, &exchange_id,
+ &tmpl, &fcp_bytes_written, &sof, &eof,
+ &ingress_port, &packet_error,
+ &fcoe_enc_error, &fcs_ok, &vlan_stripped,
+ &vlan);
+ eth_hdrs_stripped = 1;
+
+ } else if (type == CQ_DESC_TYPE_RQ_ENET) {
+ cq_enet_rq_desc_dec((struct cq_enet_rq_desc *)cq_desc,
+ &type, &color, &q_number, &completed_index,
+ &ingress_port, &fcoe, &eop, &sop,
+ &rss_type, &csum_not_calc, &rss_hash,
+ &bytes_written, &packet_error,
+ &vlan_stripped, &vlan, &checksum,
+ &fcoe_sof, &fcoe_fc_crc_ok,
+ &fcoe_enc_error, &fcoe_eof,
+ &tcp_udp_csum_ok, &udp, &tcp,
+ &ipv4_csum_ok, &ipv6, &ipv4,
+ &ipv4_fragment, &fcs_ok);
+ eth_hdrs_stripped = 0;
+
+ } else {
+ /* wrong CQ type*/
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "fnic rq_cmpl wrong cq type x%x\n", type);
+ goto drop;
+ }
+
+ if (!fcs_ok || packet_error || !fcoe_fc_crc_ok || fcoe_enc_error) {
+ FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+ "fnic rq_cmpl fcoe x%x fcsok x%x"
+ " pkterr x%x fcoe_fc_crc_ok x%x, fcoe_enc_err"
+ " x%x\n",
+ fcoe, fcs_ok, packet_error,
+ fcoe_fc_crc_ok, fcoe_enc_error);
+ goto drop;
+ }
+
+ if (eth_hdrs_stripped)
+ fnic_import_rq_fc_frame(skb, fcp_bytes_written, sof, eof);
+ else if (fnic_import_rq_eth_pkt(skb, bytes_written))
+ goto drop;
+
+ fp = (struct fc_frame *)skb;
+
+ /*
+ * If frame is an ELS response that matches the cached FLOGI OX_ID,
+ * and is accept, issue flogi_reg_request copy wq request to firmware
+ * to register the S_ID and determine whether FC_OUI mode or GW mode.
+ */
+ if (is_matching_flogi_resp_frame(fnic, fp)) {
+ if (!eth_hdrs_stripped) {
+ if (fc_frame_payload_op(fp) == ELS_LS_ACC) {
+ fnic_handle_flogi_resp(fnic, fp);
+ return;
+ }
+ /*
+ * Recd. Flogi reject. No point registering
+ * with fw, but forward to libFC
+ */
+ goto forward;
+ }
+ goto drop;
+ }
+ if (!eth_hdrs_stripped)
+ goto drop;
+
+forward:
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ if (fnic->stop_rx_link_events) {
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ goto drop;
+ }
+ /* Use fr_flags to indicate whether succ. flogi resp or not */
+ fr_flags(fp) = 0;
+ fr_dev(fp) = fnic->lport;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ skb_queue_tail(&fnic->frame_queue, skb);
+ queue_work(fnic_event_queue, &fnic->frame_work);
+
+ return;
+drop:
+ dev_kfree_skb_irq(skb);
+}
+
+static int fnic_rq_cmpl_handler_cont(struct vnic_dev *vdev,
+ struct cq_desc *cq_desc, u8 type,
+ u16 q_number, u16 completed_index,
+ void *opaque)
+{
+ struct fnic *fnic = vnic_dev_priv(vdev);
+
+ vnic_rq_service(&fnic->rq[q_number], cq_desc, completed_index,
+ VNIC_RQ_RETURN_DESC, fnic_rq_cmpl_frame_recv,
+ NULL);
+ return 0;
+}
+
+int fnic_rq_cmpl_handler(struct fnic *fnic, int rq_work_to_do)
+{
+ unsigned int tot_rq_work_done = 0, cur_work_done;
+ unsigned int i;
+ int err;
+
+ for (i = 0; i < fnic->rq_count; i++) {
+ cur_work_done = vnic_cq_service(&fnic->cq[i], rq_work_to_do,
+ fnic_rq_cmpl_handler_cont,
+ NULL);
+ if (cur_work_done) {
+ err = vnic_rq_fill(&fnic->rq[i], fnic_alloc_rq_frame);
+ if (err)
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "fnic_alloc_rq_frame cant alloc"
+ " frame\n");
+ }
+ tot_rq_work_done += cur_work_done;
+ }
+
+ return tot_rq_work_done;
+}
+
+/*
+ * This function is called once at init time to allocate and fill RQ
+ * buffers. Subsequently, it is called in the interrupt context after RQ
+ * buffer processing to replenish the buffers in the RQ
+ */
+int fnic_alloc_rq_frame(struct vnic_rq *rq)
+{
+ struct fnic *fnic = vnic_dev_priv(rq->vdev);
+ struct sk_buff *skb;
+ u16 len;
+ dma_addr_t pa;
+
+ len = FC_FRAME_HEADROOM + FC_MAX_FRAME + FC_FRAME_TAILROOM;
+ skb = dev_alloc_skb(len);
+ if (!skb) {
+ FNIC_FCS_DBG(KERN_DEBUG, fnic->lport->host,
+ "Unable to allocate RQ sk_buff\n");
+ return -ENOMEM;
+ }
+ skb_reset_mac_header(skb);
+ skb_reset_transport_header(skb);
+ skb_reset_network_header(skb);
+ skb_put(skb, len);
+ pa = pci_map_single(fnic->pdev, skb->data, len, PCI_DMA_FROMDEVICE);
+ fnic_queue_rq_desc(rq, skb, pa, len);
+ return 0;
+}
+
+void fnic_free_rq_buf(struct vnic_rq *rq, struct vnic_rq_buf *buf)
+{
+ struct fc_frame *fp = buf->os_buf;
+ struct fnic *fnic = vnic_dev_priv(rq->vdev);
+
+ pci_unmap_single(fnic->pdev, buf->dma_addr, buf->len,
+ PCI_DMA_FROMDEVICE);
+
+ dev_kfree_skb(fp_skb(fp));
+ buf->os_buf = NULL;
+}
+
+static inline int is_flogi_frame(struct fc_frame_header *fh)
+{
+ return fh->fh_r_ctl == FC_RCTL_ELS_REQ && *(u8 *)(fh + 1) == ELS_FLOGI;
+}
+
+int fnic_send_frame(struct fnic *fnic, struct fc_frame *fp)
+{
+ struct vnic_wq *wq = &fnic->wq[0];
+ struct sk_buff *skb;
+ dma_addr_t pa;
+ struct ethhdr *eth_hdr;
+ struct vlan_ethhdr *vlan_hdr;
+ struct fcoe_hdr *fcoe_hdr;
+ struct fc_frame_header *fh;
+ u32 tot_len, eth_hdr_len;
+ int ret = 0;
+ unsigned long flags;
+
+ fh = fc_frame_header_get(fp);
+ skb = fp_skb(fp);
+
+ if (!fnic->vlan_hw_insert) {
+ eth_hdr_len = sizeof(*vlan_hdr) + sizeof(*fcoe_hdr);
+ vlan_hdr = (struct vlan_ethhdr *)skb_push(skb, eth_hdr_len);
+ eth_hdr = (struct ethhdr *)vlan_hdr;
+ vlan_hdr->h_vlan_proto = htons(ETH_P_8021Q);
+ vlan_hdr->h_vlan_encapsulated_proto = htons(ETH_P_FCOE);
+ vlan_hdr->h_vlan_TCI = htons(fnic->vlan_id);
+ fcoe_hdr = (struct fcoe_hdr *)(vlan_hdr + 1);
+ } else {
+ eth_hdr_len = sizeof(*eth_hdr) + sizeof(*fcoe_hdr);
+ eth_hdr = (struct ethhdr *)skb_push(skb, eth_hdr_len);
+ eth_hdr->h_proto = htons(ETH_P_FCOE);
+ fcoe_hdr = (struct fcoe_hdr *)(eth_hdr + 1);
+ }
+
+ if (is_flogi_frame(fh)) {
+ fc_fcoe_set_mac(eth_hdr->h_dest, fh->fh_d_id);
+ memcpy(eth_hdr->h_source, fnic->mac_addr, ETH_ALEN);
+ } else {
+ if (fnic->fcoui_mode)
+ fc_fcoe_set_mac(eth_hdr->h_dest, fh->fh_d_id);
+ else
+ memcpy(eth_hdr->h_dest, fnic->dest_addr, ETH_ALEN);
+ memcpy(eth_hdr->h_source, fnic->data_src_addr, ETH_ALEN);
+ }
+
+ tot_len = skb->len;
+ BUG_ON(tot_len % 4);
+
+ memset(fcoe_hdr, 0, sizeof(*fcoe_hdr));
+ fcoe_hdr->fcoe_sof = fr_sof(fp);
+ if (FC_FCOE_VER)
+ FC_FCOE_ENCAPS_VER(fcoe_hdr, FC_FCOE_VER);
+
+ pa = pci_map_single(fnic->pdev, eth_hdr, tot_len, PCI_DMA_TODEVICE);
+
+ spin_lock_irqsave(&fnic->wq_lock[0], flags);
+
+ if (!vnic_wq_desc_avail(wq)) {
+ pci_unmap_single(fnic->pdev, pa,
+ tot_len, PCI_DMA_TODEVICE);
+ ret = -1;
+ goto fnic_send_frame_end;
+ }
+
+ fnic_queue_wq_desc(wq, skb, pa, tot_len, fr_eof(fp),
+ fnic->vlan_hw_insert, fnic->vlan_id, 1, 1, 1);
+fnic_send_frame_end:
+ spin_unlock_irqrestore(&fnic->wq_lock[0], flags);
+
+ if (ret)
+ dev_kfree_skb_any(fp_skb(fp));
+
+ return ret;
+}
+
+/*
+ * fnic_send
+ * Routine to send a raw frame
+ */
+int fnic_send(struct fc_lport *lp, struct fc_frame *fp)
+{
+ struct fnic *fnic = lport_priv(lp);
+ struct fc_frame_header *fh;
+ int ret = 0;
+ enum fnic_state old_state;
+ unsigned long flags;
+ struct fc_frame *old_flogi = NULL;
+ struct fc_frame *old_flogi_resp = NULL;
+
+ if (fnic->in_remove) {
+ dev_kfree_skb(fp_skb(fp));
+ ret = -1;
+ goto fnic_send_end;
+ }
+
+ fh = fc_frame_header_get(fp);
+ /* if not an Flogi frame, send it out, this is the common case */
+ if (!is_flogi_frame(fh))
+ return fnic_send_frame(fnic, fp);
+
+ /* Flogi frame, now enter the state machine */
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+again:
+ /* Get any old cached frames, free them after dropping lock */
+ old_flogi = fnic->flogi;
+ fnic->flogi = NULL;
+ old_flogi_resp = fnic->flogi_resp;
+ fnic->flogi_resp = NULL;
+
+ fnic->flogi_oxid = FC_XID_UNKNOWN;
+
+ old_state = fnic->state;
+ switch (old_state) {
+ case FNIC_IN_FC_MODE:
+ case FNIC_IN_ETH_TRANS_FC_MODE:
+ default:
+ fnic->state = FNIC_IN_FC_TRANS_ETH_MODE;
+ vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr);
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ if (old_flogi) {
+ dev_kfree_skb(fp_skb(old_flogi));
+ old_flogi = NULL;
+ }
+ if (old_flogi_resp) {
+ dev_kfree_skb(fp_skb(old_flogi_resp));
+ old_flogi_resp = NULL;
+ }
+
+ ret = fnic_fw_reset_handler(fnic);
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ if (fnic->state != FNIC_IN_FC_TRANS_ETH_MODE)
+ goto again;
+ if (ret) {
+ fnic->state = old_state;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ dev_kfree_skb(fp_skb(fp));
+ goto fnic_send_end;
+ }
+ old_flogi = fnic->flogi;
+ fnic->flogi = fp;
+ fnic->flogi_oxid = ntohs(fh->fh_ox_id);
+ old_flogi_resp = fnic->flogi_resp;
+ fnic->flogi_resp = NULL;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ break;
+
+ case FNIC_IN_FC_TRANS_ETH_MODE:
+ /*
+ * A reset is pending with the firmware. Store the flogi
+ * and its oxid. The transition out of this state happens
+ * only when Firmware completes the reset, either with
+ * success or failed. If success, transition to
+ * FNIC_IN_ETH_MODE, if fail, then transition to
+ * FNIC_IN_FC_MODE
+ */
+ fnic->flogi = fp;
+ fnic->flogi_oxid = ntohs(fh->fh_ox_id);
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ break;
+
+ case FNIC_IN_ETH_MODE:
+ /*
+ * The fw/hw is already in eth mode. Store the oxid,
+ * and send the flogi frame out. The transition out of this
+ * state happens only we receive flogi response from the
+ * network, and the oxid matches the cached oxid when the
+ * flogi frame was sent out. If they match, then we issue
+ * a flogi_reg request and transition to state
+ * FNIC_IN_ETH_TRANS_FC_MODE
+ */
+ fnic->flogi_oxid = ntohs(fh->fh_ox_id);
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ ret = fnic_send_frame(fnic, fp);
+ break;
+ }
+
+fnic_send_end:
+ if (old_flogi)
+ dev_kfree_skb(fp_skb(old_flogi));
+ if (old_flogi_resp)
+ dev_kfree_skb(fp_skb(old_flogi_resp));
+ return ret;
+}
+
+static void fnic_wq_complete_frame_send(struct vnic_wq *wq,
+ struct cq_desc *cq_desc,
+ struct vnic_wq_buf *buf, void *opaque)
+{
+ struct sk_buff *skb = buf->os_buf;
+ struct fc_frame *fp = (struct fc_frame *)skb;
+ struct fnic *fnic = vnic_dev_priv(wq->vdev);
+
+ pci_unmap_single(fnic->pdev, buf->dma_addr,
+ buf->len, PCI_DMA_TODEVICE);
+ dev_kfree_skb_irq(fp_skb(fp));
+ buf->os_buf = NULL;
+}
+
+static int fnic_wq_cmpl_handler_cont(struct vnic_dev *vdev,
+ struct cq_desc *cq_desc, u8 type,
+ u16 q_number, u16 completed_index,
+ void *opaque)
+{
+ struct fnic *fnic = vnic_dev_priv(vdev);
+ unsigned long flags;
+
+ spin_lock_irqsave(&fnic->wq_lock[q_number], flags);
+ vnic_wq_service(&fnic->wq[q_number], cq_desc, completed_index,
+ fnic_wq_complete_frame_send, NULL);
+ spin_unlock_irqrestore(&fnic->wq_lock[q_number], flags);
+
+ return 0;
+}
+
+int fnic_wq_cmpl_handler(struct fnic *fnic, int work_to_do)
+{
+ unsigned int wq_work_done = 0;
+ unsigned int i;
+
+ for (i = 0; i < fnic->raw_wq_count; i++) {
+ wq_work_done += vnic_cq_service(&fnic->cq[fnic->rq_count+i],
+ work_to_do,
+ fnic_wq_cmpl_handler_cont,
+ NULL);
+ }
+
+ return wq_work_done;
+}
+
+
+void fnic_free_wq_buf(struct vnic_wq *wq, struct vnic_wq_buf *buf)
+{
+ struct fc_frame *fp = buf->os_buf;
+ struct fnic *fnic = vnic_dev_priv(wq->vdev);
+
+ pci_unmap_single(fnic->pdev, buf->dma_addr,
+ buf->len, PCI_DMA_TODEVICE);
+
+ dev_kfree_skb(fp_skb(fp));
+ buf->os_buf = NULL;
+}
diff --git a/drivers/scsi/fnic/fnic_io.h b/drivers/scsi/fnic/fnic_io.h
new file mode 100644
index 00000000000..f0b896988cd
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_io.h
@@ -0,0 +1,67 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _FNIC_IO_H_
+#define _FNIC_IO_H_
+
+#include <scsi/fc/fc_fcp.h>
+
+#define FNIC_DFLT_SG_DESC_CNT 32
+#define FNIC_MAX_SG_DESC_CNT 1024 /* Maximum descriptors per sgl */
+#define FNIC_SG_DESC_ALIGN 16 /* Descriptor address alignment */
+
+struct host_sg_desc {
+ __le64 addr;
+ __le32 len;
+ u32 _resvd;
+};
+
+struct fnic_dflt_sgl_list {
+ struct host_sg_desc sg_desc[FNIC_DFLT_SG_DESC_CNT];
+};
+
+struct fnic_sgl_list {
+ struct host_sg_desc sg_desc[FNIC_MAX_SG_DESC_CNT];
+};
+
+enum fnic_sgl_list_type {
+ FNIC_SGL_CACHE_DFLT = 0, /* cache with default size sgl */
+ FNIC_SGL_CACHE_MAX, /* cache with max size sgl */
+ FNIC_SGL_NUM_CACHES /* number of sgl caches */
+};
+
+enum fnic_ioreq_state {
+ FNIC_IOREQ_CMD_PENDING = 0,
+ FNIC_IOREQ_ABTS_PENDING,
+ FNIC_IOREQ_ABTS_COMPLETE,
+ FNIC_IOREQ_CMD_COMPLETE,
+};
+
+struct fnic_io_req {
+ struct host_sg_desc *sgl_list; /* sgl list */
+ void *sgl_list_alloc; /* sgl list address used for free */
+ dma_addr_t sense_buf_pa; /* dma address for sense buffer*/
+ dma_addr_t sgl_list_pa; /* dma address for sgl list */
+ u16 sgl_cnt;
+ u8 sgl_type; /* device DMA descriptor list type */
+ u8 io_completed:1; /* set to 1 when fw completes IO */
+ u32 port_id; /* remote port DID */
+ struct completion *abts_done; /* completion for abts */
+ struct completion *dr_done; /* completion for device reset */
+};
+
+#endif /* _FNIC_IO_H_ */
diff --git a/drivers/scsi/fnic/fnic_isr.c b/drivers/scsi/fnic/fnic_isr.c
new file mode 100644
index 00000000000..2b3064828ae
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_isr.c
@@ -0,0 +1,332 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/pci.h>
+#include <linux/interrupt.h>
+#include <scsi/libfc.h>
+#include <scsi/fc_frame.h>
+#include "vnic_dev.h"
+#include "vnic_intr.h"
+#include "vnic_stats.h"
+#include "fnic_io.h"
+#include "fnic.h"
+
+static irqreturn_t fnic_isr_legacy(int irq, void *data)
+{
+ struct fnic *fnic = data;
+ u32 pba;
+ unsigned long work_done = 0;
+
+ pba = vnic_intr_legacy_pba(fnic->legacy_pba);
+ if (!pba)
+ return IRQ_NONE;
+
+ if (pba & (1 << FNIC_INTX_NOTIFY)) {
+ vnic_intr_return_all_credits(&fnic->intr[FNIC_INTX_NOTIFY]);
+ fnic_handle_link_event(fnic);
+ }
+
+ if (pba & (1 << FNIC_INTX_ERR)) {
+ vnic_intr_return_all_credits(&fnic->intr[FNIC_INTX_ERR]);
+ fnic_log_q_error(fnic);
+ }
+
+ if (pba & (1 << FNIC_INTX_WQ_RQ_COPYWQ)) {
+ work_done += fnic_wq_copy_cmpl_handler(fnic, 8);
+ work_done += fnic_wq_cmpl_handler(fnic, 4);
+ work_done += fnic_rq_cmpl_handler(fnic, 4);
+
+ vnic_intr_return_credits(&fnic->intr[FNIC_INTX_WQ_RQ_COPYWQ],
+ work_done,
+ 1 /* unmask intr */,
+ 1 /* reset intr timer */);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t fnic_isr_msi(int irq, void *data)
+{
+ struct fnic *fnic = data;
+ unsigned long work_done = 0;
+
+ work_done += fnic_wq_copy_cmpl_handler(fnic, 8);
+ work_done += fnic_wq_cmpl_handler(fnic, 4);
+ work_done += fnic_rq_cmpl_handler(fnic, 4);
+
+ vnic_intr_return_credits(&fnic->intr[0],
+ work_done,
+ 1 /* unmask intr */,
+ 1 /* reset intr timer */);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t fnic_isr_msix_rq(int irq, void *data)
+{
+ struct fnic *fnic = data;
+ unsigned long rq_work_done = 0;
+
+ rq_work_done = fnic_rq_cmpl_handler(fnic, 4);
+ vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_RQ],
+ rq_work_done,
+ 1 /* unmask intr */,
+ 1 /* reset intr timer */);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t fnic_isr_msix_wq(int irq, void *data)
+{
+ struct fnic *fnic = data;
+ unsigned long wq_work_done = 0;
+
+ wq_work_done = fnic_wq_cmpl_handler(fnic, 4);
+ vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_WQ],
+ wq_work_done,
+ 1 /* unmask intr */,
+ 1 /* reset intr timer */);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t fnic_isr_msix_wq_copy(int irq, void *data)
+{
+ struct fnic *fnic = data;
+ unsigned long wq_copy_work_done = 0;
+
+ wq_copy_work_done = fnic_wq_copy_cmpl_handler(fnic, 8);
+ vnic_intr_return_credits(&fnic->intr[FNIC_MSIX_WQ_COPY],
+ wq_copy_work_done,
+ 1 /* unmask intr */,
+ 1 /* reset intr timer */);
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t fnic_isr_msix_err_notify(int irq, void *data)
+{
+ struct fnic *fnic = data;
+
+ vnic_intr_return_all_credits(&fnic->intr[FNIC_MSIX_ERR_NOTIFY]);
+ fnic_log_q_error(fnic);
+ fnic_handle_link_event(fnic);
+
+ return IRQ_HANDLED;
+}
+
+void fnic_free_intr(struct fnic *fnic)
+{
+ int i;
+
+ switch (vnic_dev_get_intr_mode(fnic->vdev)) {
+ case VNIC_DEV_INTR_MODE_INTX:
+ case VNIC_DEV_INTR_MODE_MSI:
+ free_irq(fnic->pdev->irq, fnic);
+ break;
+
+ case VNIC_DEV_INTR_MODE_MSIX:
+ for (i = 0; i < ARRAY_SIZE(fnic->msix); i++)
+ if (fnic->msix[i].requested)
+ free_irq(fnic->msix_entry[i].vector,
+ fnic->msix[i].devid);
+ break;
+
+ default:
+ break;
+ }
+}
+
+int fnic_request_intr(struct fnic *fnic)
+{
+ int err = 0;
+ int i;
+
+ switch (vnic_dev_get_intr_mode(fnic->vdev)) {
+
+ case VNIC_DEV_INTR_MODE_INTX:
+ err = request_irq(fnic->pdev->irq, &fnic_isr_legacy,
+ IRQF_SHARED, DRV_NAME, fnic);
+ break;
+
+ case VNIC_DEV_INTR_MODE_MSI:
+ err = request_irq(fnic->pdev->irq, &fnic_isr_msi,
+ 0, fnic->name, fnic);
+ break;
+
+ case VNIC_DEV_INTR_MODE_MSIX:
+
+ sprintf(fnic->msix[FNIC_MSIX_RQ].devname,
+ "%.11s-fcs-rq", fnic->name);
+ fnic->msix[FNIC_MSIX_RQ].isr = fnic_isr_msix_rq;
+ fnic->msix[FNIC_MSIX_RQ].devid = fnic;
+
+ sprintf(fnic->msix[FNIC_MSIX_WQ].devname,
+ "%.11s-fcs-wq", fnic->name);
+ fnic->msix[FNIC_MSIX_WQ].isr = fnic_isr_msix_wq;
+ fnic->msix[FNIC_MSIX_WQ].devid = fnic;
+
+ sprintf(fnic->msix[FNIC_MSIX_WQ_COPY].devname,
+ "%.11s-scsi-wq", fnic->name);
+ fnic->msix[FNIC_MSIX_WQ_COPY].isr = fnic_isr_msix_wq_copy;
+ fnic->msix[FNIC_MSIX_WQ_COPY].devid = fnic;
+
+ sprintf(fnic->msix[FNIC_MSIX_ERR_NOTIFY].devname,
+ "%.11s-err-notify", fnic->name);
+ fnic->msix[FNIC_MSIX_ERR_NOTIFY].isr =
+ fnic_isr_msix_err_notify;
+ fnic->msix[FNIC_MSIX_ERR_NOTIFY].devid = fnic;
+
+ for (i = 0; i < ARRAY_SIZE(fnic->msix); i++) {
+ err = request_irq(fnic->msix_entry[i].vector,
+ fnic->msix[i].isr, 0,
+ fnic->msix[i].devname,
+ fnic->msix[i].devid);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "MSIX: request_irq"
+ " failed %d\n", err);
+ fnic_free_intr(fnic);
+ break;
+ }
+ fnic->msix[i].requested = 1;
+ }
+ break;
+
+ default:
+ break;
+ }
+
+ return err;
+}
+
+int fnic_set_intr_mode(struct fnic *fnic)
+{
+ unsigned int n = ARRAY_SIZE(fnic->rq);
+ unsigned int m = ARRAY_SIZE(fnic->wq);
+ unsigned int o = ARRAY_SIZE(fnic->wq_copy);
+ unsigned int i;
+
+ /*
+ * Set interrupt mode (INTx, MSI, MSI-X) depending
+ * system capabilities.
+ *
+ * Try MSI-X first
+ *
+ * We need n RQs, m WQs, o Copy WQs, n+m+o CQs, and n+m+o+1 INTRs
+ * (last INTR is used for WQ/RQ errors and notification area)
+ */
+
+ BUG_ON(ARRAY_SIZE(fnic->msix_entry) < n + m + o + 1);
+ for (i = 0; i < n + m + o + 1; i++)
+ fnic->msix_entry[i].entry = i;
+
+ if (fnic->rq_count >= n &&
+ fnic->raw_wq_count >= m &&
+ fnic->wq_copy_count >= o &&
+ fnic->cq_count >= n + m + o) {
+ if (!pci_enable_msix(fnic->pdev, fnic->msix_entry,
+ n + m + o + 1)) {
+ fnic->rq_count = n;
+ fnic->raw_wq_count = m;
+ fnic->wq_copy_count = o;
+ fnic->wq_count = m + o;
+ fnic->cq_count = n + m + o;
+ fnic->intr_count = n + m + o + 1;
+ fnic->err_intr_offset = FNIC_MSIX_ERR_NOTIFY;
+
+ FNIC_ISR_DBG(KERN_DEBUG, fnic->lport->host,
+ "Using MSI-X Interrupts\n");
+ vnic_dev_set_intr_mode(fnic->vdev,
+ VNIC_DEV_INTR_MODE_MSIX);
+ return 0;
+ }
+ }
+
+ /*
+ * Next try MSI
+ * We need 1 RQ, 1 WQ, 1 WQ_COPY, 3 CQs, and 1 INTR
+ */
+ if (fnic->rq_count >= 1 &&
+ fnic->raw_wq_count >= 1 &&
+ fnic->wq_copy_count >= 1 &&
+ fnic->cq_count >= 3 &&
+ fnic->intr_count >= 1 &&
+ !pci_enable_msi(fnic->pdev)) {
+
+ fnic->rq_count = 1;
+ fnic->raw_wq_count = 1;
+ fnic->wq_copy_count = 1;
+ fnic->wq_count = 2;
+ fnic->cq_count = 3;
+ fnic->intr_count = 1;
+ fnic->err_intr_offset = 0;
+
+ FNIC_ISR_DBG(KERN_DEBUG, fnic->lport->host,
+ "Using MSI Interrupts\n");
+ vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_MSI);
+
+ return 0;
+ }
+
+ /*
+ * Next try INTx
+ * We need 1 RQ, 1 WQ, 1 WQ_COPY, 3 CQs, and 3 INTRs
+ * 1 INTR is used for all 3 queues, 1 INTR for queue errors
+ * 1 INTR for notification area
+ */
+
+ if (fnic->rq_count >= 1 &&
+ fnic->raw_wq_count >= 1 &&
+ fnic->wq_copy_count >= 1 &&
+ fnic->cq_count >= 3 &&
+ fnic->intr_count >= 3) {
+
+ fnic->rq_count = 1;
+ fnic->raw_wq_count = 1;
+ fnic->wq_copy_count = 1;
+ fnic->cq_count = 3;
+ fnic->intr_count = 3;
+
+ FNIC_ISR_DBG(KERN_DEBUG, fnic->lport->host,
+ "Using Legacy Interrupts\n");
+ vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_INTX);
+
+ return 0;
+ }
+
+ vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_UNKNOWN);
+
+ return -EINVAL;
+}
+
+void fnic_clear_intr_mode(struct fnic *fnic)
+{
+ switch (vnic_dev_get_intr_mode(fnic->vdev)) {
+ case VNIC_DEV_INTR_MODE_MSIX:
+ pci_disable_msix(fnic->pdev);
+ break;
+ case VNIC_DEV_INTR_MODE_MSI:
+ pci_disable_msi(fnic->pdev);
+ break;
+ default:
+ break;
+ }
+
+ vnic_dev_set_intr_mode(fnic->vdev, VNIC_DEV_INTR_MODE_INTX);
+}
+
diff --git a/drivers/scsi/fnic/fnic_main.c b/drivers/scsi/fnic/fnic_main.c
new file mode 100644
index 00000000000..32ef6b87d89
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_main.c
@@ -0,0 +1,942 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/module.h>
+#include <linux/mempool.h>
+#include <linux/string.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/pci.h>
+#include <linux/skbuff.h>
+#include <linux/interrupt.h>
+#include <linux/spinlock.h>
+#include <linux/workqueue.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_transport.h>
+#include <scsi/scsi_transport_fc.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/libfc.h>
+#include <scsi/fc_frame.h>
+
+#include "vnic_dev.h"
+#include "vnic_intr.h"
+#include "vnic_stats.h"
+#include "fnic_io.h"
+#include "fnic.h"
+
+#define PCI_DEVICE_ID_CISCO_FNIC 0x0045
+
+/* Timer to poll notification area for events. Used for MSI interrupts */
+#define FNIC_NOTIFY_TIMER_PERIOD (2 * HZ)
+
+static struct kmem_cache *fnic_sgl_cache[FNIC_SGL_NUM_CACHES];
+static struct kmem_cache *fnic_io_req_cache;
+LIST_HEAD(fnic_list);
+DEFINE_SPINLOCK(fnic_list_lock);
+
+/* Supported devices by fnic module */
+static struct pci_device_id fnic_id_table[] = {
+ { PCI_DEVICE(PCI_VENDOR_ID_CISCO, PCI_DEVICE_ID_CISCO_FNIC) },
+ { 0, }
+};
+
+MODULE_DESCRIPTION(DRV_DESCRIPTION);
+MODULE_AUTHOR("Abhijeet Joglekar <abjoglek@cisco.com>, "
+ "Joseph R. Eykholt <jeykholt@cisco.com>");
+MODULE_LICENSE("GPL v2");
+MODULE_VERSION(DRV_VERSION);
+MODULE_DEVICE_TABLE(pci, fnic_id_table);
+
+unsigned int fnic_log_level;
+module_param(fnic_log_level, int, S_IRUGO|S_IWUSR);
+MODULE_PARM_DESC(fnic_log_level, "bit mask of fnic logging levels");
+
+
+static struct libfc_function_template fnic_transport_template = {
+ .frame_send = fnic_send,
+ .fcp_abort_io = fnic_empty_scsi_cleanup,
+ .fcp_cleanup = fnic_empty_scsi_cleanup,
+ .exch_mgr_reset = fnic_exch_mgr_reset
+};
+
+static int fnic_slave_alloc(struct scsi_device *sdev)
+{
+ struct fc_rport *rport = starget_to_rport(scsi_target(sdev));
+ struct fc_lport *lp = shost_priv(sdev->host);
+ struct fnic *fnic = lport_priv(lp);
+
+ sdev->tagged_supported = 1;
+
+ if (!rport || fc_remote_port_chkready(rport))
+ return -ENXIO;
+
+ scsi_activate_tcq(sdev, FNIC_DFLT_QUEUE_DEPTH);
+ rport->dev_loss_tmo = fnic->config.port_down_timeout / 1000;
+
+ return 0;
+}
+
+static struct scsi_host_template fnic_host_template = {
+ .module = THIS_MODULE,
+ .name = DRV_NAME,
+ .queuecommand = fnic_queuecommand,
+ .eh_abort_handler = fnic_abort_cmd,
+ .eh_device_reset_handler = fnic_device_reset,
+ .eh_host_reset_handler = fnic_host_reset,
+ .slave_alloc = fnic_slave_alloc,
+ .change_queue_depth = fc_change_queue_depth,
+ .change_queue_type = fc_change_queue_type,
+ .this_id = -1,
+ .cmd_per_lun = 3,
+ .can_queue = FNIC_MAX_IO_REQ,
+ .use_clustering = ENABLE_CLUSTERING,
+ .sg_tablesize = FNIC_MAX_SG_DESC_CNT,
+ .max_sectors = 0xffff,
+ .shost_attrs = fnic_attrs,
+};
+
+static void fnic_get_host_speed(struct Scsi_Host *shost);
+static struct scsi_transport_template *fnic_fc_transport;
+static struct fc_host_statistics *fnic_get_stats(struct Scsi_Host *);
+
+static struct fc_function_template fnic_fc_functions = {
+
+ .show_host_node_name = 1,
+ .show_host_port_name = 1,
+ .show_host_supported_classes = 1,
+ .show_host_supported_fc4s = 1,
+ .show_host_active_fc4s = 1,
+ .show_host_maxframe_size = 1,
+ .show_host_port_id = 1,
+ .show_host_supported_speeds = 1,
+ .get_host_speed = fnic_get_host_speed,
+ .show_host_speed = 1,
+ .show_host_port_type = 1,
+ .get_host_port_state = fc_get_host_port_state,
+ .show_host_port_state = 1,
+ .show_host_symbolic_name = 1,
+ .show_rport_maxframe_size = 1,
+ .show_rport_supported_classes = 1,
+ .show_host_fabric_name = 1,
+ .show_starget_node_name = 1,
+ .show_starget_port_name = 1,
+ .show_starget_port_id = 1,
+ .show_rport_dev_loss_tmo = 1,
+ .issue_fc_host_lip = fnic_reset,
+ .get_fc_host_stats = fnic_get_stats,
+ .dd_fcrport_size = sizeof(struct fc_rport_libfc_priv),
+ .terminate_rport_io = fnic_terminate_rport_io,
+};
+
+static void fnic_get_host_speed(struct Scsi_Host *shost)
+{
+ struct fc_lport *lp = shost_priv(shost);
+ struct fnic *fnic = lport_priv(lp);
+ u32 port_speed = vnic_dev_port_speed(fnic->vdev);
+
+ /* Add in other values as they get defined in fw */
+ switch (port_speed) {
+ case 10000:
+ fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
+ break;
+ default:
+ fc_host_speed(shost) = FC_PORTSPEED_10GBIT;
+ break;
+ }
+}
+
+static struct fc_host_statistics *fnic_get_stats(struct Scsi_Host *host)
+{
+ int ret;
+ struct fc_lport *lp = shost_priv(host);
+ struct fnic *fnic = lport_priv(lp);
+ struct fc_host_statistics *stats = &lp->host_stats;
+ struct vnic_stats *vs;
+ unsigned long flags;
+
+ if (time_before(jiffies, fnic->stats_time + HZ / FNIC_STATS_RATE_LIMIT))
+ return stats;
+ fnic->stats_time = jiffies;
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ ret = vnic_dev_stats_dump(fnic->vdev, &fnic->stats);
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ if (ret) {
+ FNIC_MAIN_DBG(KERN_DEBUG, fnic->lport->host,
+ "fnic: Get vnic stats failed"
+ " 0x%x", ret);
+ return stats;
+ }
+ vs = fnic->stats;
+ stats->tx_frames = vs->tx.tx_unicast_frames_ok;
+ stats->tx_words = vs->tx.tx_unicast_bytes_ok / 4;
+ stats->rx_frames = vs->rx.rx_unicast_frames_ok;
+ stats->rx_words = vs->rx.rx_unicast_bytes_ok / 4;
+ stats->error_frames = vs->tx.tx_errors + vs->rx.rx_errors;
+ stats->dumped_frames = vs->tx.tx_drops + vs->rx.rx_drop;
+ stats->invalid_crc_count = vs->rx.rx_crc_errors;
+ stats->seconds_since_last_reset = (jiffies - lp->boot_time) / HZ;
+ stats->fcp_input_megabytes = div_u64(fnic->fcp_input_bytes, 1000000);
+ stats->fcp_output_megabytes = div_u64(fnic->fcp_output_bytes, 1000000);
+
+ return stats;
+}
+
+void fnic_log_q_error(struct fnic *fnic)
+{
+ unsigned int i;
+ u32 error_status;
+
+ for (i = 0; i < fnic->raw_wq_count; i++) {
+ error_status = ioread32(&fnic->wq[i].ctrl->error_status);
+ if (error_status)
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "WQ[%d] error_status"
+ " %d\n", i, error_status);
+ }
+
+ for (i = 0; i < fnic->rq_count; i++) {
+ error_status = ioread32(&fnic->rq[i].ctrl->error_status);
+ if (error_status)
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "RQ[%d] error_status"
+ " %d\n", i, error_status);
+ }
+
+ for (i = 0; i < fnic->wq_copy_count; i++) {
+ error_status = ioread32(&fnic->wq_copy[i].ctrl->error_status);
+ if (error_status)
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "CWQ[%d] error_status"
+ " %d\n", i, error_status);
+ }
+}
+
+void fnic_handle_link_event(struct fnic *fnic)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ if (fnic->stop_rx_link_events) {
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ return;
+ }
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ queue_work(fnic_event_queue, &fnic->link_work);
+
+}
+
+static int fnic_notify_set(struct fnic *fnic)
+{
+ int err;
+
+ switch (vnic_dev_get_intr_mode(fnic->vdev)) {
+ case VNIC_DEV_INTR_MODE_INTX:
+ err = vnic_dev_notify_set(fnic->vdev, FNIC_INTX_NOTIFY);
+ break;
+ case VNIC_DEV_INTR_MODE_MSI:
+ err = vnic_dev_notify_set(fnic->vdev, -1);
+ break;
+ case VNIC_DEV_INTR_MODE_MSIX:
+ err = vnic_dev_notify_set(fnic->vdev, FNIC_MSIX_ERR_NOTIFY);
+ break;
+ default:
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Interrupt mode should be set up"
+ " before devcmd notify set %d\n",
+ vnic_dev_get_intr_mode(fnic->vdev));
+ err = -1;
+ break;
+ }
+
+ return err;
+}
+
+static void fnic_notify_timer(unsigned long data)
+{
+ struct fnic *fnic = (struct fnic *)data;
+
+ fnic_handle_link_event(fnic);
+ mod_timer(&fnic->notify_timer,
+ round_jiffies(jiffies + FNIC_NOTIFY_TIMER_PERIOD));
+}
+
+static void fnic_notify_timer_start(struct fnic *fnic)
+{
+ switch (vnic_dev_get_intr_mode(fnic->vdev)) {
+ case VNIC_DEV_INTR_MODE_MSI:
+ /*
+ * Schedule first timeout immediately. The driver is
+ * initiatialized and ready to look for link up notification
+ */
+ mod_timer(&fnic->notify_timer, jiffies);
+ break;
+ default:
+ /* Using intr for notification for INTx/MSI-X */
+ break;
+ };
+}
+
+static int fnic_dev_wait(struct vnic_dev *vdev,
+ int (*start)(struct vnic_dev *, int),
+ int (*finished)(struct vnic_dev *, int *),
+ int arg)
+{
+ unsigned long time;
+ int done;
+ int err;
+
+ err = start(vdev, arg);
+ if (err)
+ return err;
+
+ /* Wait for func to complete...2 seconds max */
+ time = jiffies + (HZ * 2);
+ do {
+ err = finished(vdev, &done);
+ if (err)
+ return err;
+ if (done)
+ return 0;
+ schedule_timeout_uninterruptible(HZ / 10);
+ } while (time_after(time, jiffies));
+
+ return -ETIMEDOUT;
+}
+
+static int fnic_cleanup(struct fnic *fnic)
+{
+ unsigned int i;
+ int err;
+ unsigned long flags;
+ struct fc_frame *flogi = NULL;
+ struct fc_frame *flogi_resp = NULL;
+
+ vnic_dev_disable(fnic->vdev);
+ for (i = 0; i < fnic->intr_count; i++)
+ vnic_intr_mask(&fnic->intr[i]);
+
+ for (i = 0; i < fnic->rq_count; i++) {
+ err = vnic_rq_disable(&fnic->rq[i]);
+ if (err)
+ return err;
+ }
+ for (i = 0; i < fnic->raw_wq_count; i++) {
+ err = vnic_wq_disable(&fnic->wq[i]);
+ if (err)
+ return err;
+ }
+ for (i = 0; i < fnic->wq_copy_count; i++) {
+ err = vnic_wq_copy_disable(&fnic->wq_copy[i]);
+ if (err)
+ return err;
+ }
+
+ /* Clean up completed IOs and FCS frames */
+ fnic_wq_copy_cmpl_handler(fnic, -1);
+ fnic_wq_cmpl_handler(fnic, -1);
+ fnic_rq_cmpl_handler(fnic, -1);
+
+ /* Clean up the IOs and FCS frames that have not completed */
+ for (i = 0; i < fnic->raw_wq_count; i++)
+ vnic_wq_clean(&fnic->wq[i], fnic_free_wq_buf);
+ for (i = 0; i < fnic->rq_count; i++)
+ vnic_rq_clean(&fnic->rq[i], fnic_free_rq_buf);
+ for (i = 0; i < fnic->wq_copy_count; i++)
+ vnic_wq_copy_clean(&fnic->wq_copy[i],
+ fnic_wq_copy_cleanup_handler);
+
+ for (i = 0; i < fnic->cq_count; i++)
+ vnic_cq_clean(&fnic->cq[i]);
+ for (i = 0; i < fnic->intr_count; i++)
+ vnic_intr_clean(&fnic->intr[i]);
+
+ /*
+ * Remove cached flogi and flogi resp frames if any
+ * These frames are not in any queue, and therefore queue
+ * cleanup does not clean them. So clean them explicitly
+ */
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ flogi = fnic->flogi;
+ fnic->flogi = NULL;
+ flogi_resp = fnic->flogi_resp;
+ fnic->flogi_resp = NULL;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ if (flogi)
+ dev_kfree_skb(fp_skb(flogi));
+
+ if (flogi_resp)
+ dev_kfree_skb(fp_skb(flogi_resp));
+
+ mempool_destroy(fnic->io_req_pool);
+ for (i = 0; i < FNIC_SGL_NUM_CACHES; i++)
+ mempool_destroy(fnic->io_sgl_pool[i]);
+
+ return 0;
+}
+
+static void fnic_iounmap(struct fnic *fnic)
+{
+ if (fnic->bar0.vaddr)
+ iounmap(fnic->bar0.vaddr);
+}
+
+/*
+ * Allocate element for mempools requiring GFP_DMA flag.
+ * Otherwise, checks in kmem_flagcheck() hit BUG_ON().
+ */
+static void *fnic_alloc_slab_dma(gfp_t gfp_mask, void *pool_data)
+{
+ struct kmem_cache *mem = pool_data;
+
+ return kmem_cache_alloc(mem, gfp_mask | GFP_ATOMIC | GFP_DMA);
+}
+
+static int __devinit fnic_probe(struct pci_dev *pdev,
+ const struct pci_device_id *ent)
+{
+ struct Scsi_Host *host;
+ struct fc_lport *lp;
+ struct fnic *fnic;
+ mempool_t *pool;
+ int err;
+ int i;
+ unsigned long flags;
+
+ /*
+ * Allocate SCSI Host and set up association between host,
+ * local port, and fnic
+ */
+ host = scsi_host_alloc(&fnic_host_template,
+ sizeof(struct fc_lport) + sizeof(struct fnic));
+ if (!host) {
+ printk(KERN_ERR PFX "Unable to alloc SCSI host\n");
+ err = -ENOMEM;
+ goto err_out;
+ }
+ lp = shost_priv(host);
+ lp->host = host;
+ fnic = lport_priv(lp);
+ fnic->lport = lp;
+
+ snprintf(fnic->name, sizeof(fnic->name) - 1, "%s%d", DRV_NAME,
+ host->host_no);
+
+ host->transportt = fnic_fc_transport;
+
+ err = scsi_init_shared_tag_map(host, FNIC_MAX_IO_REQ);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Unable to alloc shared tag map\n");
+ goto err_out_free_hba;
+ }
+
+ /* Setup PCI resources */
+ pci_set_drvdata(pdev, fnic);
+
+ fnic->pdev = pdev;
+
+ err = pci_enable_device(pdev);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Cannot enable PCI device, aborting.\n");
+ goto err_out_free_hba;
+ }
+
+ err = pci_request_regions(pdev, DRV_NAME);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Cannot enable PCI resources, aborting\n");
+ goto err_out_disable_device;
+ }
+
+ pci_set_master(pdev);
+
+ /* Query PCI controller on system for DMA addressing
+ * limitation for the device. Try 40-bit first, and
+ * fail to 32-bit.
+ */
+ err = pci_set_dma_mask(pdev, DMA_40BIT_MASK);
+ if (err) {
+ err = pci_set_dma_mask(pdev, DMA_32BIT_MASK);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "No usable DMA configuration "
+ "aborting\n");
+ goto err_out_release_regions;
+ }
+ err = pci_set_consistent_dma_mask(pdev, DMA_32BIT_MASK);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Unable to obtain 32-bit DMA "
+ "for consistent allocations, aborting.\n");
+ goto err_out_release_regions;
+ }
+ } else {
+ err = pci_set_consistent_dma_mask(pdev, DMA_40BIT_MASK);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Unable to obtain 40-bit DMA "
+ "for consistent allocations, aborting.\n");
+ goto err_out_release_regions;
+ }
+ }
+
+ /* Map vNIC resources from BAR0 */
+ if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "BAR0 not memory-map'able, aborting.\n");
+ err = -ENODEV;
+ goto err_out_release_regions;
+ }
+
+ fnic->bar0.vaddr = pci_iomap(pdev, 0, 0);
+ fnic->bar0.bus_addr = pci_resource_start(pdev, 0);
+ fnic->bar0.len = pci_resource_len(pdev, 0);
+
+ if (!fnic->bar0.vaddr) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Cannot memory-map BAR0 res hdr, "
+ "aborting.\n");
+ err = -ENODEV;
+ goto err_out_release_regions;
+ }
+
+ fnic->vdev = vnic_dev_register(NULL, fnic, pdev, &fnic->bar0);
+ if (!fnic->vdev) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "vNIC registration failed, "
+ "aborting.\n");
+ err = -ENODEV;
+ goto err_out_iounmap;
+ }
+
+ err = fnic_dev_wait(fnic->vdev, vnic_dev_open,
+ vnic_dev_open_done, 0);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "vNIC dev open failed, aborting.\n");
+ goto err_out_vnic_unregister;
+ }
+
+ err = vnic_dev_init(fnic->vdev, 0);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "vNIC dev init failed, aborting.\n");
+ goto err_out_dev_close;
+ }
+
+ err = vnic_dev_mac_addr(fnic->vdev, fnic->mac_addr);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "vNIC get MAC addr failed \n");
+ goto err_out_dev_close;
+ }
+
+ /* Get vNIC configuration */
+ err = fnic_get_vnic_config(fnic);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Get vNIC configuration failed, "
+ "aborting.\n");
+ goto err_out_dev_close;
+ }
+ host->max_lun = fnic->config.luns_per_tgt;
+ host->max_id = FNIC_MAX_FCP_TARGET;
+
+ fnic_get_res_counts(fnic);
+
+ err = fnic_set_intr_mode(fnic);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Failed to set intr mode, "
+ "aborting.\n");
+ goto err_out_dev_close;
+ }
+
+ err = fnic_request_intr(fnic);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Unable to request irq.\n");
+ goto err_out_clear_intr;
+ }
+
+ err = fnic_alloc_vnic_resources(fnic);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Failed to alloc vNIC resources, "
+ "aborting.\n");
+ goto err_out_free_intr;
+ }
+
+
+ /* initialize all fnic locks */
+ spin_lock_init(&fnic->fnic_lock);
+
+ for (i = 0; i < FNIC_WQ_MAX; i++)
+ spin_lock_init(&fnic->wq_lock[i]);
+
+ for (i = 0; i < FNIC_WQ_COPY_MAX; i++) {
+ spin_lock_init(&fnic->wq_copy_lock[i]);
+ fnic->wq_copy_desc_low[i] = DESC_CLEAN_LOW_WATERMARK;
+ fnic->fw_ack_recd[i] = 0;
+ fnic->fw_ack_index[i] = -1;
+ }
+
+ for (i = 0; i < FNIC_IO_LOCKS; i++)
+ spin_lock_init(&fnic->io_req_lock[i]);
+
+ fnic->io_req_pool = mempool_create_slab_pool(2, fnic_io_req_cache);
+ if (!fnic->io_req_pool)
+ goto err_out_free_resources;
+
+ pool = mempool_create(2, fnic_alloc_slab_dma, mempool_free_slab,
+ fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]);
+ if (!pool)
+ goto err_out_free_ioreq_pool;
+ fnic->io_sgl_pool[FNIC_SGL_CACHE_DFLT] = pool;
+
+ pool = mempool_create(2, fnic_alloc_slab_dma, mempool_free_slab,
+ fnic_sgl_cache[FNIC_SGL_CACHE_MAX]);
+ if (!pool)
+ goto err_out_free_dflt_pool;
+ fnic->io_sgl_pool[FNIC_SGL_CACHE_MAX] = pool;
+
+ /* setup vlan config, hw inserts vlan header */
+ fnic->vlan_hw_insert = 1;
+ fnic->vlan_id = 0;
+
+ fnic->flogi_oxid = FC_XID_UNKNOWN;
+ fnic->flogi = NULL;
+ fnic->flogi_resp = NULL;
+ fnic->state = FNIC_IN_FC_MODE;
+
+ /* Enable hardware stripping of vlan header on ingress */
+ fnic_set_nic_config(fnic, 0, 0, 0, 0, 0, 0, 1);
+
+ /* Setup notification buffer area */
+ err = fnic_notify_set(fnic);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Failed to alloc notify buffer, aborting.\n");
+ goto err_out_free_max_pool;
+ }
+
+ /* Setup notify timer when using MSI interrupts */
+ if (vnic_dev_get_intr_mode(fnic->vdev) == VNIC_DEV_INTR_MODE_MSI)
+ setup_timer(&fnic->notify_timer,
+ fnic_notify_timer, (unsigned long)fnic);
+
+ /* allocate RQ buffers and post them to RQ*/
+ for (i = 0; i < fnic->rq_count; i++) {
+ err = vnic_rq_fill(&fnic->rq[i], fnic_alloc_rq_frame);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "fnic_alloc_rq_frame can't alloc "
+ "frame\n");
+ goto err_out_free_rq_buf;
+ }
+ }
+
+ /*
+ * Initialization done with PCI system, hardware, firmware.
+ * Add host to SCSI
+ */
+ err = scsi_add_host(lp->host, &pdev->dev);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "fnic: scsi_add_host failed...exiting\n");
+ goto err_out_free_rq_buf;
+ }
+
+ /* Start local port initiatialization */
+
+ lp->link_up = 0;
+ lp->tt = fnic_transport_template;
+
+ lp->emp = fc_exch_mgr_alloc(lp, FC_CLASS_3,
+ FCPIO_HOST_EXCH_RANGE_START,
+ FCPIO_HOST_EXCH_RANGE_END);
+ if (!lp->emp) {
+ err = -ENOMEM;
+ goto err_out_remove_scsi_host;
+ }
+
+ lp->max_retry_count = fnic->config.flogi_retries;
+ lp->service_params = (FCP_SPPF_INIT_FCN | FCP_SPPF_RD_XRDY_DIS |
+ FCP_SPPF_CONF_COMPL);
+ if (fnic->config.flags & VFCF_FCP_SEQ_LVL_ERR)
+ lp->service_params |= FCP_SPPF_RETRY;
+
+ lp->boot_time = jiffies;
+ lp->e_d_tov = fnic->config.ed_tov;
+ lp->r_a_tov = fnic->config.ra_tov;
+ lp->link_supported_speeds = FC_PORTSPEED_10GBIT;
+ fc_set_wwnn(lp, fnic->config.node_wwn);
+ fc_set_wwpn(lp, fnic->config.port_wwn);
+
+ fc_exch_init(lp);
+ fc_lport_init(lp);
+ fc_elsct_init(lp);
+ fc_rport_init(lp);
+ fc_disc_init(lp);
+
+ fc_lport_config(lp);
+
+ if (fc_set_mfs(lp, fnic->config.maxdatafieldsize +
+ sizeof(struct fc_frame_header))) {
+ err = -EINVAL;
+ goto err_out_free_exch_mgr;
+ }
+ fc_host_maxframe_size(lp->host) = lp->mfs;
+
+ sprintf(fc_host_symbolic_name(lp->host),
+ DRV_NAME " v" DRV_VERSION " over %s", fnic->name);
+
+ spin_lock_irqsave(&fnic_list_lock, flags);
+ list_add_tail(&fnic->list, &fnic_list);
+ spin_unlock_irqrestore(&fnic_list_lock, flags);
+
+ INIT_WORK(&fnic->link_work, fnic_handle_link);
+ INIT_WORK(&fnic->frame_work, fnic_handle_frame);
+ skb_queue_head_init(&fnic->frame_queue);
+
+ /* Enable all queues */
+ for (i = 0; i < fnic->raw_wq_count; i++)
+ vnic_wq_enable(&fnic->wq[i]);
+ for (i = 0; i < fnic->rq_count; i++)
+ vnic_rq_enable(&fnic->rq[i]);
+ for (i = 0; i < fnic->wq_copy_count; i++)
+ vnic_wq_copy_enable(&fnic->wq_copy[i]);
+
+ fc_fabric_login(lp);
+
+ vnic_dev_enable(fnic->vdev);
+ for (i = 0; i < fnic->intr_count; i++)
+ vnic_intr_unmask(&fnic->intr[i]);
+
+ fnic_notify_timer_start(fnic);
+
+ return 0;
+
+err_out_free_exch_mgr:
+ fc_exch_mgr_free(lp->emp);
+err_out_remove_scsi_host:
+ fc_remove_host(fnic->lport->host);
+ scsi_remove_host(fnic->lport->host);
+err_out_free_rq_buf:
+ for (i = 0; i < fnic->rq_count; i++)
+ vnic_rq_clean(&fnic->rq[i], fnic_free_rq_buf);
+ vnic_dev_notify_unset(fnic->vdev);
+err_out_free_max_pool:
+ mempool_destroy(fnic->io_sgl_pool[FNIC_SGL_CACHE_MAX]);
+err_out_free_dflt_pool:
+ mempool_destroy(fnic->io_sgl_pool[FNIC_SGL_CACHE_DFLT]);
+err_out_free_ioreq_pool:
+ mempool_destroy(fnic->io_req_pool);
+err_out_free_resources:
+ fnic_free_vnic_resources(fnic);
+err_out_free_intr:
+ fnic_free_intr(fnic);
+err_out_clear_intr:
+ fnic_clear_intr_mode(fnic);
+err_out_dev_close:
+ vnic_dev_close(fnic->vdev);
+err_out_vnic_unregister:
+ vnic_dev_unregister(fnic->vdev);
+err_out_iounmap:
+ fnic_iounmap(fnic);
+err_out_release_regions:
+ pci_release_regions(pdev);
+err_out_disable_device:
+ pci_disable_device(pdev);
+err_out_free_hba:
+ scsi_host_put(lp->host);
+err_out:
+ return err;
+}
+
+static void __devexit fnic_remove(struct pci_dev *pdev)
+{
+ struct fnic *fnic = pci_get_drvdata(pdev);
+ unsigned long flags;
+
+ /*
+ * Mark state so that the workqueue thread stops forwarding
+ * received frames and link events to the local port. ISR and
+ * other threads that can queue work items will also stop
+ * creating work items on the fnic workqueue
+ */
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ fnic->stop_rx_link_events = 1;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ if (vnic_dev_get_intr_mode(fnic->vdev) == VNIC_DEV_INTR_MODE_MSI)
+ del_timer_sync(&fnic->notify_timer);
+
+ /*
+ * Flush the fnic event queue. After this call, there should
+ * be no event queued for this fnic device in the workqueue
+ */
+ flush_workqueue(fnic_event_queue);
+ skb_queue_purge(&fnic->frame_queue);
+
+ /*
+ * Log off the fabric. This stops all remote ports, dns port,
+ * logs off the fabric. This flushes all rport, disc, lport work
+ * before returning
+ */
+ fc_fabric_logoff(fnic->lport);
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ fnic->in_remove = 1;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ fc_lport_destroy(fnic->lport);
+
+ /*
+ * This stops the fnic device, masks all interrupts. Completed
+ * CQ entries are drained. Posted WQ/RQ/Copy-WQ entries are
+ * cleaned up
+ */
+ fnic_cleanup(fnic);
+
+ BUG_ON(!skb_queue_empty(&fnic->frame_queue));
+
+ spin_lock_irqsave(&fnic_list_lock, flags);
+ list_del(&fnic->list);
+ spin_unlock_irqrestore(&fnic_list_lock, flags);
+
+ fc_remove_host(fnic->lport->host);
+ scsi_remove_host(fnic->lport->host);
+ fc_exch_mgr_free(fnic->lport->emp);
+ vnic_dev_notify_unset(fnic->vdev);
+ fnic_free_vnic_resources(fnic);
+ fnic_free_intr(fnic);
+ fnic_clear_intr_mode(fnic);
+ vnic_dev_close(fnic->vdev);
+ vnic_dev_unregister(fnic->vdev);
+ fnic_iounmap(fnic);
+ pci_release_regions(pdev);
+ pci_disable_device(pdev);
+ pci_set_drvdata(pdev, NULL);
+ scsi_host_put(fnic->lport->host);
+}
+
+static struct pci_driver fnic_driver = {
+ .name = DRV_NAME,
+ .id_table = fnic_id_table,
+ .probe = fnic_probe,
+ .remove = __devexit_p(fnic_remove),
+};
+
+static int __init fnic_init_module(void)
+{
+ size_t len;
+ int err = 0;
+
+ printk(KERN_INFO PFX "%s, ver %s\n", DRV_DESCRIPTION, DRV_VERSION);
+
+ /* Create a cache for allocation of default size sgls */
+ len = sizeof(struct fnic_dflt_sgl_list);
+ fnic_sgl_cache[FNIC_SGL_CACHE_DFLT] = kmem_cache_create
+ ("fnic_sgl_dflt", len + FNIC_SG_DESC_ALIGN, FNIC_SG_DESC_ALIGN,
+ SLAB_HWCACHE_ALIGN | SLAB_CACHE_DMA,
+ NULL);
+ if (!fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]) {
+ printk(KERN_ERR PFX "failed to create fnic dflt sgl slab\n");
+ err = -ENOMEM;
+ goto err_create_fnic_sgl_slab_dflt;
+ }
+
+ /* Create a cache for allocation of max size sgls*/
+ len = sizeof(struct fnic_sgl_list);
+ fnic_sgl_cache[FNIC_SGL_CACHE_MAX] = kmem_cache_create
+ ("fnic_sgl_max", len + FNIC_SG_DESC_ALIGN, FNIC_SG_DESC_ALIGN,
+ SLAB_HWCACHE_ALIGN | SLAB_CACHE_DMA,
+ NULL);
+ if (!fnic_sgl_cache[FNIC_SGL_CACHE_MAX]) {
+ printk(KERN_ERR PFX "failed to create fnic max sgl slab\n");
+ err = -ENOMEM;
+ goto err_create_fnic_sgl_slab_max;
+ }
+
+ /* Create a cache of io_req structs for use via mempool */
+ fnic_io_req_cache = kmem_cache_create("fnic_io_req",
+ sizeof(struct fnic_io_req),
+ 0, SLAB_HWCACHE_ALIGN, NULL);
+ if (!fnic_io_req_cache) {
+ printk(KERN_ERR PFX "failed to create fnic io_req slab\n");
+ err = -ENOMEM;
+ goto err_create_fnic_ioreq_slab;
+ }
+
+ fnic_event_queue = create_singlethread_workqueue("fnic_event_wq");
+ if (!fnic_event_queue) {
+ printk(KERN_ERR PFX "fnic work queue create failed\n");
+ err = -ENOMEM;
+ goto err_create_fnic_workq;
+ }
+
+ spin_lock_init(&fnic_list_lock);
+ INIT_LIST_HEAD(&fnic_list);
+
+ fnic_fc_transport = fc_attach_transport(&fnic_fc_functions);
+ if (!fnic_fc_transport) {
+ printk(KERN_ERR PFX "fc_attach_transport error\n");
+ err = -ENOMEM;
+ goto err_fc_transport;
+ }
+
+ /* register the driver with PCI system */
+ err = pci_register_driver(&fnic_driver);
+ if (err < 0) {
+ printk(KERN_ERR PFX "pci register error\n");
+ goto err_pci_register;
+ }
+ return err;
+
+err_pci_register:
+ fc_release_transport(fnic_fc_transport);
+err_fc_transport:
+ destroy_workqueue(fnic_event_queue);
+err_create_fnic_workq:
+ kmem_cache_destroy(fnic_io_req_cache);
+err_create_fnic_ioreq_slab:
+ kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_MAX]);
+err_create_fnic_sgl_slab_max:
+ kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]);
+err_create_fnic_sgl_slab_dflt:
+ return err;
+}
+
+static void __exit fnic_cleanup_module(void)
+{
+ pci_unregister_driver(&fnic_driver);
+ destroy_workqueue(fnic_event_queue);
+ kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_MAX]);
+ kmem_cache_destroy(fnic_sgl_cache[FNIC_SGL_CACHE_DFLT]);
+ kmem_cache_destroy(fnic_io_req_cache);
+ fc_release_transport(fnic_fc_transport);
+}
+
+module_init(fnic_init_module);
+module_exit(fnic_cleanup_module);
+
diff --git a/drivers/scsi/fnic/fnic_res.c b/drivers/scsi/fnic/fnic_res.c
new file mode 100644
index 00000000000..7ba61ec715d
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_res.c
@@ -0,0 +1,444 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include "wq_enet_desc.h"
+#include "rq_enet_desc.h"
+#include "cq_enet_desc.h"
+#include "vnic_resource.h"
+#include "vnic_dev.h"
+#include "vnic_wq.h"
+#include "vnic_rq.h"
+#include "vnic_cq.h"
+#include "vnic_intr.h"
+#include "vnic_stats.h"
+#include "vnic_nic.h"
+#include "fnic.h"
+
+int fnic_get_vnic_config(struct fnic *fnic)
+{
+ struct vnic_fc_config *c = &fnic->config;
+ int err;
+
+#define GET_CONFIG(m) \
+ do { \
+ err = vnic_dev_spec(fnic->vdev, \
+ offsetof(struct vnic_fc_config, m), \
+ sizeof(c->m), &c->m); \
+ if (err) { \
+ shost_printk(KERN_ERR, fnic->lport->host, \
+ "Error getting %s, %d\n", #m, \
+ err); \
+ return err; \
+ } \
+ } while (0);
+
+ GET_CONFIG(node_wwn);
+ GET_CONFIG(port_wwn);
+ GET_CONFIG(wq_enet_desc_count);
+ GET_CONFIG(wq_copy_desc_count);
+ GET_CONFIG(rq_desc_count);
+ GET_CONFIG(maxdatafieldsize);
+ GET_CONFIG(ed_tov);
+ GET_CONFIG(ra_tov);
+ GET_CONFIG(intr_timer);
+ GET_CONFIG(intr_timer_type);
+ GET_CONFIG(flags);
+ GET_CONFIG(flogi_retries);
+ GET_CONFIG(flogi_timeout);
+ GET_CONFIG(plogi_retries);
+ GET_CONFIG(plogi_timeout);
+ GET_CONFIG(io_throttle_count);
+ GET_CONFIG(link_down_timeout);
+ GET_CONFIG(port_down_timeout);
+ GET_CONFIG(port_down_io_retries);
+ GET_CONFIG(luns_per_tgt);
+
+ c->wq_enet_desc_count =
+ min_t(u32, VNIC_FNIC_WQ_DESCS_MAX,
+ max_t(u32, VNIC_FNIC_WQ_DESCS_MIN,
+ c->wq_enet_desc_count));
+ c->wq_enet_desc_count = ALIGN(c->wq_enet_desc_count, 16);
+
+ c->wq_copy_desc_count =
+ min_t(u32, VNIC_FNIC_WQ_COPY_DESCS_MAX,
+ max_t(u32, VNIC_FNIC_WQ_COPY_DESCS_MIN,
+ c->wq_copy_desc_count));
+ c->wq_copy_desc_count = ALIGN(c->wq_copy_desc_count, 16);
+
+ c->rq_desc_count =
+ min_t(u32, VNIC_FNIC_RQ_DESCS_MAX,
+ max_t(u32, VNIC_FNIC_RQ_DESCS_MIN,
+ c->rq_desc_count));
+ c->rq_desc_count = ALIGN(c->rq_desc_count, 16);
+
+ c->maxdatafieldsize =
+ min_t(u16, VNIC_FNIC_MAXDATAFIELDSIZE_MAX,
+ max_t(u16, VNIC_FNIC_MAXDATAFIELDSIZE_MIN,
+ c->maxdatafieldsize));
+ c->ed_tov =
+ min_t(u32, VNIC_FNIC_EDTOV_MAX,
+ max_t(u32, VNIC_FNIC_EDTOV_MIN,
+ c->ed_tov));
+
+ c->ra_tov =
+ min_t(u32, VNIC_FNIC_RATOV_MAX,
+ max_t(u32, VNIC_FNIC_RATOV_MIN,
+ c->ra_tov));
+
+ c->flogi_retries =
+ min_t(u32, VNIC_FNIC_FLOGI_RETRIES_MAX, c->flogi_retries);
+
+ c->flogi_timeout =
+ min_t(u32, VNIC_FNIC_FLOGI_TIMEOUT_MAX,
+ max_t(u32, VNIC_FNIC_FLOGI_TIMEOUT_MIN,
+ c->flogi_timeout));
+
+ c->plogi_retries =
+ min_t(u32, VNIC_FNIC_PLOGI_RETRIES_MAX, c->plogi_retries);
+
+ c->plogi_timeout =
+ min_t(u32, VNIC_FNIC_PLOGI_TIMEOUT_MAX,
+ max_t(u32, VNIC_FNIC_PLOGI_TIMEOUT_MIN,
+ c->plogi_timeout));
+
+ c->io_throttle_count =
+ min_t(u32, VNIC_FNIC_IO_THROTTLE_COUNT_MAX,
+ max_t(u32, VNIC_FNIC_IO_THROTTLE_COUNT_MIN,
+ c->io_throttle_count));
+
+ c->link_down_timeout =
+ min_t(u32, VNIC_FNIC_LINK_DOWN_TIMEOUT_MAX,
+ c->link_down_timeout);
+
+ c->port_down_timeout =
+ min_t(u32, VNIC_FNIC_PORT_DOWN_TIMEOUT_MAX,
+ c->port_down_timeout);
+
+ c->port_down_io_retries =
+ min_t(u32, VNIC_FNIC_PORT_DOWN_IO_RETRIES_MAX,
+ c->port_down_io_retries);
+
+ c->luns_per_tgt =
+ min_t(u32, VNIC_FNIC_LUNS_PER_TARGET_MAX,
+ max_t(u32, VNIC_FNIC_LUNS_PER_TARGET_MIN,
+ c->luns_per_tgt));
+
+ c->intr_timer = min_t(u16, VNIC_INTR_TIMER_MAX, c->intr_timer);
+ c->intr_timer_type = c->intr_timer_type;
+
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "vNIC MAC addr %02x:%02x:%02x:%02x:%02x:%02x "
+ "wq/wq_copy/rq %d/%d/%d\n",
+ fnic->mac_addr[0], fnic->mac_addr[1], fnic->mac_addr[2],
+ fnic->mac_addr[3], fnic->mac_addr[4], fnic->mac_addr[5],
+ c->wq_enet_desc_count, c->wq_copy_desc_count,
+ c->rq_desc_count);
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "vNIC node wwn %llx port wwn %llx\n",
+ c->node_wwn, c->port_wwn);
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "vNIC ed_tov %d ra_tov %d\n",
+ c->ed_tov, c->ra_tov);
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "vNIC mtu %d intr timer %d\n",
+ c->maxdatafieldsize, c->intr_timer);
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "vNIC flags 0x%x luns per tgt %d\n",
+ c->flags, c->luns_per_tgt);
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "vNIC flogi_retries %d flogi timeout %d\n",
+ c->flogi_retries, c->flogi_timeout);
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "vNIC plogi retries %d plogi timeout %d\n",
+ c->plogi_retries, c->plogi_timeout);
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "vNIC io throttle count %d link dn timeout %d\n",
+ c->io_throttle_count, c->link_down_timeout);
+ shost_printk(KERN_INFO, fnic->lport->host,
+ "vNIC port dn io retries %d port dn timeout %d\n",
+ c->port_down_io_retries, c->port_down_timeout);
+
+ return 0;
+}
+
+int fnic_set_nic_config(struct fnic *fnic, u8 rss_default_cpu,
+ u8 rss_hash_type,
+ u8 rss_hash_bits, u8 rss_base_cpu, u8 rss_enable,
+ u8 tso_ipid_split_en, u8 ig_vlan_strip_en)
+{
+ u64 a0, a1;
+ u32 nic_cfg;
+ int wait = 1000;
+
+ vnic_set_nic_cfg(&nic_cfg, rss_default_cpu,
+ rss_hash_type, rss_hash_bits, rss_base_cpu,
+ rss_enable, tso_ipid_split_en, ig_vlan_strip_en);
+
+ a0 = nic_cfg;
+ a1 = 0;
+
+ return vnic_dev_cmd(fnic->vdev, CMD_NIC_CFG, &a0, &a1, wait);
+}
+
+void fnic_get_res_counts(struct fnic *fnic)
+{
+ fnic->wq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_WQ);
+ fnic->raw_wq_count = fnic->wq_count - 1;
+ fnic->wq_copy_count = fnic->wq_count - fnic->raw_wq_count;
+ fnic->rq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_RQ);
+ fnic->cq_count = vnic_dev_get_res_count(fnic->vdev, RES_TYPE_CQ);
+ fnic->intr_count = vnic_dev_get_res_count(fnic->vdev,
+ RES_TYPE_INTR_CTRL);
+}
+
+void fnic_free_vnic_resources(struct fnic *fnic)
+{
+ unsigned int i;
+
+ for (i = 0; i < fnic->raw_wq_count; i++)
+ vnic_wq_free(&fnic->wq[i]);
+
+ for (i = 0; i < fnic->wq_copy_count; i++)
+ vnic_wq_copy_free(&fnic->wq_copy[i]);
+
+ for (i = 0; i < fnic->rq_count; i++)
+ vnic_rq_free(&fnic->rq[i]);
+
+ for (i = 0; i < fnic->cq_count; i++)
+ vnic_cq_free(&fnic->cq[i]);
+
+ for (i = 0; i < fnic->intr_count; i++)
+ vnic_intr_free(&fnic->intr[i]);
+}
+
+int fnic_alloc_vnic_resources(struct fnic *fnic)
+{
+ enum vnic_dev_intr_mode intr_mode;
+ unsigned int mask_on_assertion;
+ unsigned int interrupt_offset;
+ unsigned int error_interrupt_enable;
+ unsigned int error_interrupt_offset;
+ unsigned int i, cq_index;
+ unsigned int wq_copy_cq_desc_count;
+ int err;
+
+ intr_mode = vnic_dev_get_intr_mode(fnic->vdev);
+
+ shost_printk(KERN_INFO, fnic->lport->host, "vNIC interrupt mode: %s\n",
+ intr_mode == VNIC_DEV_INTR_MODE_INTX ? "legacy PCI INTx" :
+ intr_mode == VNIC_DEV_INTR_MODE_MSI ? "MSI" :
+ intr_mode == VNIC_DEV_INTR_MODE_MSIX ?
+ "MSI-X" : "unknown");
+
+ shost_printk(KERN_INFO, fnic->lport->host, "vNIC resources avail: "
+ "wq %d cp_wq %d raw_wq %d rq %d cq %d intr %d\n",
+ fnic->wq_count, fnic->wq_copy_count, fnic->raw_wq_count,
+ fnic->rq_count, fnic->cq_count, fnic->intr_count);
+
+ /* Allocate Raw WQ used for FCS frames */
+ for (i = 0; i < fnic->raw_wq_count; i++) {
+ err = vnic_wq_alloc(fnic->vdev, &fnic->wq[i], i,
+ fnic->config.wq_enet_desc_count,
+ sizeof(struct wq_enet_desc));
+ if (err)
+ goto err_out_cleanup;
+ }
+
+ /* Allocate Copy WQs used for SCSI IOs */
+ for (i = 0; i < fnic->wq_copy_count; i++) {
+ err = vnic_wq_copy_alloc(fnic->vdev, &fnic->wq_copy[i],
+ (fnic->raw_wq_count + i),
+ fnic->config.wq_copy_desc_count,
+ sizeof(struct fcpio_host_req));
+ if (err)
+ goto err_out_cleanup;
+ }
+
+ /* RQ for receiving FCS frames */
+ for (i = 0; i < fnic->rq_count; i++) {
+ err = vnic_rq_alloc(fnic->vdev, &fnic->rq[i], i,
+ fnic->config.rq_desc_count,
+ sizeof(struct rq_enet_desc));
+ if (err)
+ goto err_out_cleanup;
+ }
+
+ /* CQ for each RQ */
+ for (i = 0; i < fnic->rq_count; i++) {
+ cq_index = i;
+ err = vnic_cq_alloc(fnic->vdev,
+ &fnic->cq[cq_index], cq_index,
+ fnic->config.rq_desc_count,
+ sizeof(struct cq_enet_rq_desc));
+ if (err)
+ goto err_out_cleanup;
+ }
+
+ /* CQ for each WQ */
+ for (i = 0; i < fnic->raw_wq_count; i++) {
+ cq_index = fnic->rq_count + i;
+ err = vnic_cq_alloc(fnic->vdev, &fnic->cq[cq_index], cq_index,
+ fnic->config.wq_enet_desc_count,
+ sizeof(struct cq_enet_wq_desc));
+ if (err)
+ goto err_out_cleanup;
+ }
+
+ /* CQ for each COPY WQ */
+ wq_copy_cq_desc_count = (fnic->config.wq_copy_desc_count * 3);
+ for (i = 0; i < fnic->wq_copy_count; i++) {
+ cq_index = fnic->raw_wq_count + fnic->rq_count + i;
+ err = vnic_cq_alloc(fnic->vdev, &fnic->cq[cq_index],
+ cq_index,
+ wq_copy_cq_desc_count,
+ sizeof(struct fcpio_fw_req));
+ if (err)
+ goto err_out_cleanup;
+ }
+
+ for (i = 0; i < fnic->intr_count; i++) {
+ err = vnic_intr_alloc(fnic->vdev, &fnic->intr[i], i);
+ if (err)
+ goto err_out_cleanup;
+ }
+
+ fnic->legacy_pba = vnic_dev_get_res(fnic->vdev,
+ RES_TYPE_INTR_PBA_LEGACY, 0);
+
+ if (!fnic->legacy_pba && intr_mode == VNIC_DEV_INTR_MODE_INTX) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Failed to hook legacy pba resource\n");
+ err = -ENODEV;
+ goto err_out_cleanup;
+ }
+
+ /*
+ * Init RQ/WQ resources.
+ *
+ * RQ[0 to n-1] point to CQ[0 to n-1]
+ * WQ[0 to m-1] point to CQ[n to n+m-1]
+ * WQ_COPY[0 to k-1] points to CQ[n+m to n+m+k-1]
+ *
+ * Note for copy wq we always initialize with cq_index = 0
+ *
+ * Error interrupt is not enabled for MSI.
+ */
+
+ switch (intr_mode) {
+ case VNIC_DEV_INTR_MODE_INTX:
+ case VNIC_DEV_INTR_MODE_MSIX:
+ error_interrupt_enable = 1;
+ error_interrupt_offset = fnic->err_intr_offset;
+ break;
+ default:
+ error_interrupt_enable = 0;
+ error_interrupt_offset = 0;
+ break;
+ }
+
+ for (i = 0; i < fnic->rq_count; i++) {
+ cq_index = i;
+ vnic_rq_init(&fnic->rq[i],
+ cq_index,
+ error_interrupt_enable,
+ error_interrupt_offset);
+ }
+
+ for (i = 0; i < fnic->raw_wq_count; i++) {
+ cq_index = i + fnic->rq_count;
+ vnic_wq_init(&fnic->wq[i],
+ cq_index,
+ error_interrupt_enable,
+ error_interrupt_offset);
+ }
+
+ for (i = 0; i < fnic->wq_copy_count; i++) {
+ vnic_wq_copy_init(&fnic->wq_copy[i],
+ 0 /* cq_index 0 - always */,
+ error_interrupt_enable,
+ error_interrupt_offset);
+ }
+
+ for (i = 0; i < fnic->cq_count; i++) {
+
+ switch (intr_mode) {
+ case VNIC_DEV_INTR_MODE_MSIX:
+ interrupt_offset = i;
+ break;
+ default:
+ interrupt_offset = 0;
+ break;
+ }
+
+ vnic_cq_init(&fnic->cq[i],
+ 0 /* flow_control_enable */,
+ 1 /* color_enable */,
+ 0 /* cq_head */,
+ 0 /* cq_tail */,
+ 1 /* cq_tail_color */,
+ 1 /* interrupt_enable */,
+ 1 /* cq_entry_enable */,
+ 0 /* cq_message_enable */,
+ interrupt_offset,
+ 0 /* cq_message_addr */);
+ }
+
+ /*
+ * Init INTR resources
+ *
+ * mask_on_assertion is not used for INTx due to the level-
+ * triggered nature of INTx
+ */
+
+ switch (intr_mode) {
+ case VNIC_DEV_INTR_MODE_MSI:
+ case VNIC_DEV_INTR_MODE_MSIX:
+ mask_on_assertion = 1;
+ break;
+ default:
+ mask_on_assertion = 0;
+ break;
+ }
+
+ for (i = 0; i < fnic->intr_count; i++) {
+ vnic_intr_init(&fnic->intr[i],
+ fnic->config.intr_timer,
+ fnic->config.intr_timer_type,
+ mask_on_assertion);
+ }
+
+ /* init the stats memory by making the first call here */
+ err = vnic_dev_stats_dump(fnic->vdev, &fnic->stats);
+ if (err) {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "vnic_dev_stats_dump failed - x%x\n", err);
+ goto err_out_cleanup;
+ }
+
+ /* Clear LIF stats */
+ vnic_dev_stats_clear(fnic->vdev);
+
+ return 0;
+
+err_out_cleanup:
+ fnic_free_vnic_resources(fnic);
+
+ return err;
+}
diff --git a/drivers/scsi/fnic/fnic_res.h b/drivers/scsi/fnic/fnic_res.h
new file mode 100644
index 00000000000..b6f31026253
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_res.h
@@ -0,0 +1,197 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _FNIC_RES_H_
+#define _FNIC_RES_H_
+
+#include "wq_enet_desc.h"
+#include "rq_enet_desc.h"
+#include "vnic_wq.h"
+#include "vnic_rq.h"
+#include "fnic_io.h"
+#include "fcpio.h"
+#include "vnic_wq_copy.h"
+#include "vnic_cq_copy.h"
+
+static inline void fnic_queue_wq_desc(struct vnic_wq *wq,
+ void *os_buf, dma_addr_t dma_addr,
+ unsigned int len, unsigned int fc_eof,
+ int vlan_tag_insert,
+ unsigned int vlan_tag,
+ int cq_entry, int sop, int eop)
+{
+ struct wq_enet_desc *desc = vnic_wq_next_desc(wq);
+
+ wq_enet_desc_enc(desc,
+ (u64)dma_addr | VNIC_PADDR_TARGET,
+ (u16)len,
+ 0, /* mss_or_csum_offset */
+ (u16)fc_eof,
+ 0, /* offload_mode */
+ (u8)eop, (u8)cq_entry,
+ 1, /* fcoe_encap */
+ (u8)vlan_tag_insert,
+ (u16)vlan_tag,
+ 0 /* loopback */);
+
+ vnic_wq_post(wq, os_buf, dma_addr, len, sop, eop);
+}
+
+static inline void fnic_queue_wq_copy_desc_icmnd_16(struct vnic_wq_copy *wq,
+ u32 req_id,
+ u32 lunmap_id, u8 spl_flags,
+ u32 sgl_cnt, u32 sense_len,
+ u64 sgl_addr, u64 sns_addr,
+ u8 crn, u8 pri_ta,
+ u8 flags, u8 *scsi_cdb,
+ u32 data_len, u8 *lun,
+ u32 d_id, u16 mss,
+ u32 ratov, u32 edtov)
+{
+ struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq);
+
+ desc->hdr.type = FCPIO_ICMND_16; /* enum fcpio_type */
+ desc->hdr.status = 0; /* header status entry */
+ desc->hdr._resvd = 0; /* reserved */
+ desc->hdr.tag.u.req_id = req_id; /* id for this request */
+
+ desc->u.icmnd_16.lunmap_id = lunmap_id; /* index into lunmap table */
+ desc->u.icmnd_16.special_req_flags = spl_flags; /* exch req flags */
+ desc->u.icmnd_16._resvd0[0] = 0; /* reserved */
+ desc->u.icmnd_16._resvd0[1] = 0; /* reserved */
+ desc->u.icmnd_16._resvd0[2] = 0; /* reserved */
+ desc->u.icmnd_16.sgl_cnt = sgl_cnt; /* scatter-gather list count */
+ desc->u.icmnd_16.sense_len = sense_len; /* sense buffer length */
+ desc->u.icmnd_16.sgl_addr = sgl_addr; /* scatter-gather list addr */
+ desc->u.icmnd_16.sense_addr = sns_addr; /* sense buffer address */
+ desc->u.icmnd_16.crn = crn; /* SCSI Command Reference No.*/
+ desc->u.icmnd_16.pri_ta = pri_ta; /* SCSI Pri & Task attribute */
+ desc->u.icmnd_16._resvd1 = 0; /* reserved: should be 0 */
+ desc->u.icmnd_16.flags = flags; /* command flags */
+ memcpy(desc->u.icmnd_16.scsi_cdb, scsi_cdb, CDB_16); /* SCSI CDB */
+ desc->u.icmnd_16.data_len = data_len; /* length of data expected */
+ memcpy(desc->u.icmnd_16.lun, lun, LUN_ADDRESS); /* LUN address */
+ desc->u.icmnd_16._resvd2 = 0; /* reserved */
+ hton24(desc->u.icmnd_16.d_id, d_id); /* FC vNIC only: Target D_ID */
+ desc->u.icmnd_16.mss = mss; /* FC vNIC only: max burst */
+ desc->u.icmnd_16.r_a_tov = ratov; /*FC vNIC only: Res. Alloc Timeout */
+ desc->u.icmnd_16.e_d_tov = edtov; /*FC vNIC only: Err Detect Timeout */
+
+ vnic_wq_copy_post(wq);
+}
+
+static inline void fnic_queue_wq_copy_desc_itmf(struct vnic_wq_copy *wq,
+ u32 req_id, u32 lunmap_id,
+ u32 tm_req, u32 tm_id, u8 *lun,
+ u32 d_id, u32 r_a_tov,
+ u32 e_d_tov)
+{
+ struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq);
+
+ desc->hdr.type = FCPIO_ITMF; /* enum fcpio_type */
+ desc->hdr.status = 0; /* header status entry */
+ desc->hdr._resvd = 0; /* reserved */
+ desc->hdr.tag.u.req_id = req_id; /* id for this request */
+
+ desc->u.itmf.lunmap_id = lunmap_id; /* index into lunmap table */
+ desc->u.itmf.tm_req = tm_req; /* SCSI Task Management request */
+ desc->u.itmf.t_tag = tm_id; /* tag of fcpio to be aborted */
+ desc->u.itmf._resvd = 0;
+ memcpy(desc->u.itmf.lun, lun, LUN_ADDRESS); /* LUN address */
+ desc->u.itmf._resvd1 = 0;
+ hton24(desc->u.itmf.d_id, d_id); /* FC vNIC only: Target D_ID */
+ desc->u.itmf.r_a_tov = r_a_tov; /* FC vNIC only: R_A_TOV in msec */
+ desc->u.itmf.e_d_tov = e_d_tov; /* FC vNIC only: E_D_TOV in msec */
+
+ vnic_wq_copy_post(wq);
+}
+
+static inline void fnic_queue_wq_copy_desc_flogi_reg(struct vnic_wq_copy *wq,
+ u32 req_id, u8 format,
+ u32 s_id, u8 *gw_mac)
+{
+ struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq);
+
+ desc->hdr.type = FCPIO_FLOGI_REG; /* enum fcpio_type */
+ desc->hdr.status = 0; /* header status entry */
+ desc->hdr._resvd = 0; /* reserved */
+ desc->hdr.tag.u.req_id = req_id; /* id for this request */
+
+ desc->u.flogi_reg.format = format;
+ hton24(desc->u.flogi_reg.s_id, s_id);
+ memcpy(desc->u.flogi_reg.gateway_mac, gw_mac, ETH_ALEN);
+
+ vnic_wq_copy_post(wq);
+}
+
+static inline void fnic_queue_wq_copy_desc_fw_reset(struct vnic_wq_copy *wq,
+ u32 req_id)
+{
+ struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq);
+
+ desc->hdr.type = FCPIO_RESET; /* enum fcpio_type */
+ desc->hdr.status = 0; /* header status entry */
+ desc->hdr._resvd = 0; /* reserved */
+ desc->hdr.tag.u.req_id = req_id; /* id for this request */
+
+ vnic_wq_copy_post(wq);
+}
+
+static inline void fnic_queue_wq_copy_desc_lunmap(struct vnic_wq_copy *wq,
+ u32 req_id, u64 lunmap_addr,
+ u32 lunmap_len)
+{
+ struct fcpio_host_req *desc = vnic_wq_copy_next_desc(wq);
+
+ desc->hdr.type = FCPIO_LUNMAP_REQ; /* enum fcpio_type */
+ desc->hdr.status = 0; /* header status entry */
+ desc->hdr._resvd = 0; /* reserved */
+ desc->hdr.tag.u.req_id = req_id; /* id for this request */
+
+ desc->u.lunmap_req.addr = lunmap_addr; /* address of the buffer */
+ desc->u.lunmap_req.len = lunmap_len; /* len of the buffer */
+
+ vnic_wq_copy_post(wq);
+}
+
+static inline void fnic_queue_rq_desc(struct vnic_rq *rq,
+ void *os_buf, dma_addr_t dma_addr,
+ u16 len)
+{
+ struct rq_enet_desc *desc = vnic_rq_next_desc(rq);
+
+ rq_enet_desc_enc(desc,
+ (u64)dma_addr | VNIC_PADDR_TARGET,
+ RQ_ENET_TYPE_ONLY_SOP,
+ (u16)len);
+
+ vnic_rq_post(rq, os_buf, 0, dma_addr, len);
+}
+
+
+struct fnic;
+
+int fnic_get_vnic_config(struct fnic *);
+int fnic_alloc_vnic_resources(struct fnic *);
+void fnic_free_vnic_resources(struct fnic *);
+void fnic_get_res_counts(struct fnic *);
+int fnic_set_nic_config(struct fnic *fnic, u8 rss_default_cpu,
+ u8 rss_hash_type, u8 rss_hash_bits, u8 rss_base_cpu,
+ u8 rss_enable, u8 tso_ipid_split_en,
+ u8 ig_vlan_strip_en);
+
+#endif /* _FNIC_RES_H_ */
diff --git a/drivers/scsi/fnic/fnic_scsi.c b/drivers/scsi/fnic/fnic_scsi.c
new file mode 100644
index 00000000000..eabf3650285
--- /dev/null
+++ b/drivers/scsi/fnic/fnic_scsi.c
@@ -0,0 +1,1850 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/mempool.h>
+#include <linux/errno.h>
+#include <linux/init.h>
+#include <linux/workqueue.h>
+#include <linux/pci.h>
+#include <linux/scatterlist.h>
+#include <linux/skbuff.h>
+#include <linux/spinlock.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/delay.h>
+#include <scsi/scsi.h>
+#include <scsi/scsi_host.h>
+#include <scsi/scsi_device.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_tcq.h>
+#include <scsi/fc/fc_els.h>
+#include <scsi/fc/fc_fcoe.h>
+#include <scsi/libfc.h>
+#include <scsi/fc_frame.h>
+#include "fnic_io.h"
+#include "fnic.h"
+
+const char *fnic_state_str[] = {
+ [FNIC_IN_FC_MODE] = "FNIC_IN_FC_MODE",
+ [FNIC_IN_FC_TRANS_ETH_MODE] = "FNIC_IN_FC_TRANS_ETH_MODE",
+ [FNIC_IN_ETH_MODE] = "FNIC_IN_ETH_MODE",
+ [FNIC_IN_ETH_TRANS_FC_MODE] = "FNIC_IN_ETH_TRANS_FC_MODE",
+};
+
+static const char *fnic_ioreq_state_str[] = {
+ [FNIC_IOREQ_CMD_PENDING] = "FNIC_IOREQ_CMD_PENDING",
+ [FNIC_IOREQ_ABTS_PENDING] = "FNIC_IOREQ_ABTS_PENDING",
+ [FNIC_IOREQ_ABTS_COMPLETE] = "FNIC_IOREQ_ABTS_COMPLETE",
+ [FNIC_IOREQ_CMD_COMPLETE] = "FNIC_IOREQ_CMD_COMPLETE",
+};
+
+static const char *fcpio_status_str[] = {
+ [FCPIO_SUCCESS] = "FCPIO_SUCCESS", /*0x0*/
+ [FCPIO_INVALID_HEADER] = "FCPIO_INVALID_HEADER",
+ [FCPIO_OUT_OF_RESOURCE] = "FCPIO_OUT_OF_RESOURCE",
+ [FCPIO_INVALID_PARAM] = "FCPIO_INVALID_PARAM]",
+ [FCPIO_REQ_NOT_SUPPORTED] = "FCPIO_REQ_NOT_SUPPORTED",
+ [FCPIO_IO_NOT_FOUND] = "FCPIO_IO_NOT_FOUND",
+ [FCPIO_ABORTED] = "FCPIO_ABORTED", /*0x41*/
+ [FCPIO_TIMEOUT] = "FCPIO_TIMEOUT",
+ [FCPIO_SGL_INVALID] = "FCPIO_SGL_INVALID",
+ [FCPIO_MSS_INVALID] = "FCPIO_MSS_INVALID",
+ [FCPIO_DATA_CNT_MISMATCH] = "FCPIO_DATA_CNT_MISMATCH",
+ [FCPIO_FW_ERR] = "FCPIO_FW_ERR",
+ [FCPIO_ITMF_REJECTED] = "FCPIO_ITMF_REJECTED",
+ [FCPIO_ITMF_FAILED] = "FCPIO_ITMF_FAILED",
+ [FCPIO_ITMF_INCORRECT_LUN] = "FCPIO_ITMF_INCORRECT_LUN",
+ [FCPIO_CMND_REJECTED] = "FCPIO_CMND_REJECTED",
+ [FCPIO_NO_PATH_AVAIL] = "FCPIO_NO_PATH_AVAIL",
+ [FCPIO_PATH_FAILED] = "FCPIO_PATH_FAILED",
+ [FCPIO_LUNMAP_CHNG_PEND] = "FCPIO_LUNHMAP_CHNG_PEND",
+};
+
+const char *fnic_state_to_str(unsigned int state)
+{
+ if (state >= ARRAY_SIZE(fnic_state_str) || !fnic_state_str[state])
+ return "unknown";
+
+ return fnic_state_str[state];
+}
+
+static const char *fnic_ioreq_state_to_str(unsigned int state)
+{
+ if (state >= ARRAY_SIZE(fnic_ioreq_state_str) ||
+ !fnic_ioreq_state_str[state])
+ return "unknown";
+
+ return fnic_ioreq_state_str[state];
+}
+
+static const char *fnic_fcpio_status_to_str(unsigned int status)
+{
+ if (status >= ARRAY_SIZE(fcpio_status_str) || !fcpio_status_str[status])
+ return "unknown";
+
+ return fcpio_status_str[status];
+}
+
+static void fnic_cleanup_io(struct fnic *fnic, int exclude_id);
+
+static inline spinlock_t *fnic_io_lock_hash(struct fnic *fnic,
+ struct scsi_cmnd *sc)
+{
+ u32 hash = sc->request->tag & (FNIC_IO_LOCKS - 1);
+
+ return &fnic->io_req_lock[hash];
+}
+
+/*
+ * Unmap the data buffer and sense buffer for an io_req,
+ * also unmap and free the device-private scatter/gather list.
+ */
+static void fnic_release_ioreq_buf(struct fnic *fnic,
+ struct fnic_io_req *io_req,
+ struct scsi_cmnd *sc)
+{
+ if (io_req->sgl_list_pa)
+ pci_unmap_single(fnic->pdev, io_req->sgl_list_pa,
+ sizeof(io_req->sgl_list[0]) * io_req->sgl_cnt,
+ PCI_DMA_TODEVICE);
+ scsi_dma_unmap(sc);
+
+ if (io_req->sgl_cnt)
+ mempool_free(io_req->sgl_list_alloc,
+ fnic->io_sgl_pool[io_req->sgl_type]);
+ if (io_req->sense_buf_pa)
+ pci_unmap_single(fnic->pdev, io_req->sense_buf_pa,
+ SCSI_SENSE_BUFFERSIZE, PCI_DMA_FROMDEVICE);
+}
+
+/* Free up Copy Wq descriptors. Called with copy_wq lock held */
+static int free_wq_copy_descs(struct fnic *fnic, struct vnic_wq_copy *wq)
+{
+ /* if no Ack received from firmware, then nothing to clean */
+ if (!fnic->fw_ack_recd[0])
+ return 1;
+
+ /*
+ * Update desc_available count based on number of freed descriptors
+ * Account for wraparound
+ */
+ if (wq->to_clean_index <= fnic->fw_ack_index[0])
+ wq->ring.desc_avail += (fnic->fw_ack_index[0]
+ - wq->to_clean_index + 1);
+ else
+ wq->ring.desc_avail += (wq->ring.desc_count
+ - wq->to_clean_index
+ + fnic->fw_ack_index[0] + 1);
+
+ /*
+ * just bump clean index to ack_index+1 accounting for wraparound
+ * this will essentially free up all descriptors between
+ * to_clean_index and fw_ack_index, both inclusive
+ */
+ wq->to_clean_index =
+ (fnic->fw_ack_index[0] + 1) % wq->ring.desc_count;
+
+ /* we have processed the acks received so far */
+ fnic->fw_ack_recd[0] = 0;
+ return 0;
+}
+
+
+/*
+ * fnic_fw_reset_handler
+ * Routine to send reset msg to fw
+ */
+int fnic_fw_reset_handler(struct fnic *fnic)
+{
+ struct vnic_wq_copy *wq = &fnic->wq_copy[0];
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
+
+ if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+ free_wq_copy_descs(fnic, wq);
+
+ if (!vnic_wq_copy_desc_avail(wq))
+ ret = -EAGAIN;
+ else
+ fnic_queue_wq_copy_desc_fw_reset(wq, SCSI_NO_TAG);
+
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+
+ if (!ret)
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Issued fw reset\n");
+ else
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Failed to issue fw reset\n");
+ return ret;
+}
+
+
+/*
+ * fnic_flogi_reg_handler
+ * Routine to send flogi register msg to fw
+ */
+int fnic_flogi_reg_handler(struct fnic *fnic)
+{
+ struct vnic_wq_copy *wq = &fnic->wq_copy[0];
+ u8 gw_mac[ETH_ALEN];
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
+
+ if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+ free_wq_copy_descs(fnic, wq);
+
+ if (!vnic_wq_copy_desc_avail(wq)) {
+ ret = -EAGAIN;
+ goto flogi_reg_ioreq_end;
+ }
+
+ if (fnic->fcoui_mode)
+ memset(gw_mac, 0xff, ETH_ALEN);
+ else
+ memcpy(gw_mac, fnic->dest_addr, ETH_ALEN);
+
+ fnic_queue_wq_copy_desc_flogi_reg(wq, SCSI_NO_TAG,
+ FCPIO_FLOGI_REG_GW_DEST,
+ fnic->s_id,
+ gw_mac);
+
+flogi_reg_ioreq_end:
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+
+ if (!ret)
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "flog reg issued\n");
+
+ return ret;
+}
+
+/*
+ * fnic_queue_wq_copy_desc
+ * Routine to enqueue a wq copy desc
+ */
+static inline int fnic_queue_wq_copy_desc(struct fnic *fnic,
+ struct vnic_wq_copy *wq,
+ struct fnic_io_req *io_req,
+ struct scsi_cmnd *sc,
+ u32 sg_count)
+{
+ struct scatterlist *sg;
+ struct fc_rport *rport = starget_to_rport(scsi_target(sc->device));
+ struct fc_rport_libfc_priv *rp = rport->dd_data;
+ struct host_sg_desc *desc;
+ u8 pri_tag = 0;
+ unsigned int i;
+ unsigned long intr_flags;
+ int flags;
+ u8 exch_flags;
+ struct scsi_lun fc_lun;
+ char msg[2];
+
+ if (sg_count) {
+ BUG_ON(sg_count < 0);
+ BUG_ON(sg_count > FNIC_MAX_SG_DESC_CNT);
+
+ /* For each SGE, create a device desc entry */
+ desc = io_req->sgl_list;
+ for_each_sg(scsi_sglist(sc), sg, sg_count, i) {
+ desc->addr = cpu_to_le64(sg_dma_address(sg));
+ desc->len = cpu_to_le32(sg_dma_len(sg));
+ desc->_resvd = 0;
+ desc++;
+ }
+
+ io_req->sgl_list_pa = pci_map_single
+ (fnic->pdev,
+ io_req->sgl_list,
+ sizeof(io_req->sgl_list[0]) * sg_count,
+ PCI_DMA_TODEVICE);
+ }
+
+ io_req->sense_buf_pa = pci_map_single(fnic->pdev,
+ sc->sense_buffer,
+ SCSI_SENSE_BUFFERSIZE,
+ PCI_DMA_FROMDEVICE);
+
+ int_to_scsilun(sc->device->lun, &fc_lun);
+
+ pri_tag = FCPIO_ICMND_PTA_SIMPLE;
+ msg[0] = MSG_SIMPLE_TAG;
+ scsi_populate_tag_msg(sc, msg);
+ if (msg[0] == MSG_ORDERED_TAG)
+ pri_tag = FCPIO_ICMND_PTA_ORDERED;
+
+ /* Enqueue the descriptor in the Copy WQ */
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags);
+
+ if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+ free_wq_copy_descs(fnic, wq);
+
+ if (unlikely(!vnic_wq_copy_desc_avail(wq))) {
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags);
+ return SCSI_MLQUEUE_HOST_BUSY;
+ }
+
+ flags = 0;
+ if (sc->sc_data_direction == DMA_FROM_DEVICE)
+ flags = FCPIO_ICMND_RDDATA;
+ else if (sc->sc_data_direction == DMA_TO_DEVICE)
+ flags = FCPIO_ICMND_WRDATA;
+
+ exch_flags = 0;
+ if ((fnic->config.flags & VFCF_FCP_SEQ_LVL_ERR) &&
+ (rp->flags & FC_RP_FLAGS_RETRY))
+ exch_flags |= FCPIO_ICMND_SRFLAG_RETRY;
+
+ fnic_queue_wq_copy_desc_icmnd_16(wq, sc->request->tag,
+ 0, exch_flags, io_req->sgl_cnt,
+ SCSI_SENSE_BUFFERSIZE,
+ io_req->sgl_list_pa,
+ io_req->sense_buf_pa,
+ 0, /* scsi cmd ref, always 0 */
+ pri_tag, /* scsi pri and tag */
+ flags, /* command flags */
+ sc->cmnd, scsi_bufflen(sc),
+ fc_lun.scsi_lun, io_req->port_id,
+ rport->maxframe_size, rp->r_a_tov,
+ rp->e_d_tov);
+
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags);
+ return 0;
+}
+
+/*
+ * fnic_queuecommand
+ * Routine to send a scsi cdb
+ * Called with host_lock held and interrupts disabled.
+ */
+int fnic_queuecommand(struct scsi_cmnd *sc, void (*done)(struct scsi_cmnd *))
+{
+ struct fc_lport *lp;
+ struct fc_rport *rport;
+ struct fnic_io_req *io_req;
+ struct fnic *fnic;
+ struct vnic_wq_copy *wq;
+ int ret;
+ u32 sg_count;
+ unsigned long flags;
+ unsigned long ptr;
+
+ rport = starget_to_rport(scsi_target(sc->device));
+ ret = fc_remote_port_chkready(rport);
+ if (ret) {
+ sc->result = ret;
+ done(sc);
+ return 0;
+ }
+
+ lp = shost_priv(sc->device->host);
+ if (lp->state != LPORT_ST_READY || !(lp->link_up))
+ return SCSI_MLQUEUE_HOST_BUSY;
+
+ /*
+ * Release host lock, use driver resource specific locks from here.
+ * Don't re-enable interrupts in case they were disabled prior to the
+ * caller disabling them.
+ */
+ spin_unlock(lp->host->host_lock);
+
+ /* Get a new io_req for this SCSI IO */
+ fnic = lport_priv(lp);
+
+ io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC);
+ if (!io_req) {
+ ret = SCSI_MLQUEUE_HOST_BUSY;
+ goto out;
+ }
+ memset(io_req, 0, sizeof(*io_req));
+
+ /* Map the data buffer */
+ sg_count = scsi_dma_map(sc);
+ if (sg_count < 0) {
+ mempool_free(io_req, fnic->io_req_pool);
+ goto out;
+ }
+
+ /* Determine the type of scatter/gather list we need */
+ io_req->sgl_cnt = sg_count;
+ io_req->sgl_type = FNIC_SGL_CACHE_DFLT;
+ if (sg_count > FNIC_DFLT_SG_DESC_CNT)
+ io_req->sgl_type = FNIC_SGL_CACHE_MAX;
+
+ if (sg_count) {
+ io_req->sgl_list =
+ mempool_alloc(fnic->io_sgl_pool[io_req->sgl_type],
+ GFP_ATOMIC | GFP_DMA);
+ if (!io_req->sgl_list) {
+ ret = SCSI_MLQUEUE_HOST_BUSY;
+ scsi_dma_unmap(sc);
+ mempool_free(io_req, fnic->io_req_pool);
+ goto out;
+ }
+
+ /* Cache sgl list allocated address before alignment */
+ io_req->sgl_list_alloc = io_req->sgl_list;
+ ptr = (unsigned long) io_req->sgl_list;
+ if (ptr % FNIC_SG_DESC_ALIGN) {
+ io_req->sgl_list = (struct host_sg_desc *)
+ (((unsigned long) ptr
+ + FNIC_SG_DESC_ALIGN - 1)
+ & ~(FNIC_SG_DESC_ALIGN - 1));
+ }
+ }
+
+ /* initialize rest of io_req */
+ io_req->port_id = rport->port_id;
+ CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING;
+ CMD_SP(sc) = (char *)io_req;
+ sc->scsi_done = done;
+
+ /* create copy wq desc and enqueue it */
+ wq = &fnic->wq_copy[0];
+ ret = fnic_queue_wq_copy_desc(fnic, wq, io_req, sc, sg_count);
+ if (ret) {
+ /*
+ * In case another thread cancelled the request,
+ * refetch the pointer under the lock.
+ */
+ spinlock_t *io_lock = fnic_io_lock_hash(fnic, sc);
+
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ CMD_SP(sc) = NULL;
+ CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE;
+ spin_unlock_irqrestore(io_lock, flags);
+ if (io_req) {
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+ }
+ }
+out:
+ /* acquire host lock before returning to SCSI */
+ spin_lock(lp->host->host_lock);
+ return ret;
+}
+
+/*
+ * fnic_fcpio_fw_reset_cmpl_handler
+ * Routine to handle fw reset completion
+ */
+static int fnic_fcpio_fw_reset_cmpl_handler(struct fnic *fnic,
+ struct fcpio_fw_req *desc)
+{
+ u8 type;
+ u8 hdr_status;
+ struct fcpio_tag tag;
+ int ret = 0;
+ struct fc_frame *flogi;
+ unsigned long flags;
+
+ fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
+
+ /* Clean up all outstanding io requests */
+ fnic_cleanup_io(fnic, SCSI_NO_TAG);
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+
+ flogi = fnic->flogi;
+ fnic->flogi = NULL;
+
+ /* fnic should be in FC_TRANS_ETH_MODE */
+ if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE) {
+ /* Check status of reset completion */
+ if (!hdr_status) {
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "reset cmpl success\n");
+ /* Ready to send flogi out */
+ fnic->state = FNIC_IN_ETH_MODE;
+ } else {
+ FNIC_SCSI_DBG(KERN_DEBUG,
+ fnic->lport->host,
+ "fnic fw_reset : failed %s\n",
+ fnic_fcpio_status_to_str(hdr_status));
+
+ /*
+ * Unable to change to eth mode, cannot send out flogi
+ * Change state to fc mode, so that subsequent Flogi
+ * requests from libFC will cause more attempts to
+ * reset the firmware. Free the cached flogi
+ */
+ fnic->state = FNIC_IN_FC_MODE;
+ ret = -1;
+ }
+ } else {
+ FNIC_SCSI_DBG(KERN_DEBUG,
+ fnic->lport->host,
+ "Unexpected state %s while processing"
+ " reset cmpl\n", fnic_state_to_str(fnic->state));
+ ret = -1;
+ }
+
+ /* Thread removing device blocks till firmware reset is complete */
+ if (fnic->remove_wait)
+ complete(fnic->remove_wait);
+
+ /*
+ * If fnic is being removed, or fw reset failed
+ * free the flogi frame. Else, send it out
+ */
+ if (fnic->remove_wait || ret) {
+ fnic->flogi_oxid = FC_XID_UNKNOWN;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ if (flogi)
+ dev_kfree_skb_irq(fp_skb(flogi));
+ goto reset_cmpl_handler_end;
+ }
+
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ if (flogi)
+ ret = fnic_send_frame(fnic, flogi);
+
+ reset_cmpl_handler_end:
+ return ret;
+}
+
+/*
+ * fnic_fcpio_flogi_reg_cmpl_handler
+ * Routine to handle flogi register completion
+ */
+static int fnic_fcpio_flogi_reg_cmpl_handler(struct fnic *fnic,
+ struct fcpio_fw_req *desc)
+{
+ u8 type;
+ u8 hdr_status;
+ struct fcpio_tag tag;
+ int ret = 0;
+ struct fc_frame *flogi_resp = NULL;
+ unsigned long flags;
+ struct sk_buff *skb;
+
+ fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
+
+ /* Update fnic state based on status of flogi reg completion */
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+
+ flogi_resp = fnic->flogi_resp;
+ fnic->flogi_resp = NULL;
+
+ if (fnic->state == FNIC_IN_ETH_TRANS_FC_MODE) {
+
+ /* Check flogi registration completion status */
+ if (!hdr_status) {
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "flog reg succeeded\n");
+ fnic->state = FNIC_IN_FC_MODE;
+ } else {
+ FNIC_SCSI_DBG(KERN_DEBUG,
+ fnic->lport->host,
+ "fnic flogi reg :failed %s\n",
+ fnic_fcpio_status_to_str(hdr_status));
+ fnic->state = FNIC_IN_ETH_MODE;
+ ret = -1;
+ }
+ } else {
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Unexpected fnic state %s while"
+ " processing flogi reg completion\n",
+ fnic_state_to_str(fnic->state));
+ ret = -1;
+ }
+
+ /* Successful flogi reg cmpl, pass frame to LibFC */
+ if (!ret && flogi_resp) {
+ if (fnic->stop_rx_link_events) {
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ goto reg_cmpl_handler_end;
+ }
+ skb = (struct sk_buff *)flogi_resp;
+ /* Use fr_flags to indicate whether flogi resp or not */
+ fr_flags(flogi_resp) = 1;
+ fr_dev(flogi_resp) = fnic->lport;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ skb_queue_tail(&fnic->frame_queue, skb);
+ queue_work(fnic_event_queue, &fnic->frame_work);
+
+ } else {
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ if (flogi_resp)
+ dev_kfree_skb_irq(fp_skb(flogi_resp));
+ }
+
+reg_cmpl_handler_end:
+ return ret;
+}
+
+static inline int is_ack_index_in_range(struct vnic_wq_copy *wq,
+ u16 request_out)
+{
+ if (wq->to_clean_index <= wq->to_use_index) {
+ /* out of range, stale request_out index */
+ if (request_out < wq->to_clean_index ||
+ request_out >= wq->to_use_index)
+ return 0;
+ } else {
+ /* out of range, stale request_out index */
+ if (request_out < wq->to_clean_index &&
+ request_out >= wq->to_use_index)
+ return 0;
+ }
+ /* request_out index is in range */
+ return 1;
+}
+
+
+/*
+ * Mark that ack received and store the Ack index. If there are multiple
+ * acks received before Tx thread cleans it up, the latest value will be
+ * used which is correct behavior. This state should be in the copy Wq
+ * instead of in the fnic
+ */
+static inline void fnic_fcpio_ack_handler(struct fnic *fnic,
+ unsigned int cq_index,
+ struct fcpio_fw_req *desc)
+{
+ struct vnic_wq_copy *wq;
+ u16 request_out = desc->u.ack.request_out;
+ unsigned long flags;
+
+ /* mark the ack state */
+ wq = &fnic->wq_copy[cq_index - fnic->raw_wq_count - fnic->rq_count];
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
+
+ if (is_ack_index_in_range(wq, request_out)) {
+ fnic->fw_ack_index[0] = request_out;
+ fnic->fw_ack_recd[0] = 1;
+ }
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+}
+
+/*
+ * fnic_fcpio_icmnd_cmpl_handler
+ * Routine to handle icmnd completions
+ */
+static void fnic_fcpio_icmnd_cmpl_handler(struct fnic *fnic,
+ struct fcpio_fw_req *desc)
+{
+ u8 type;
+ u8 hdr_status;
+ struct fcpio_tag tag;
+ u32 id;
+ u64 xfer_len = 0;
+ struct fcpio_icmnd_cmpl *icmnd_cmpl;
+ struct fnic_io_req *io_req;
+ struct scsi_cmnd *sc;
+ unsigned long flags;
+ spinlock_t *io_lock;
+
+ /* Decode the cmpl description to get the io_req id */
+ fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
+ fcpio_tag_id_dec(&tag, &id);
+
+ if (id >= FNIC_MAX_IO_REQ)
+ return;
+
+ sc = scsi_host_find_tag(fnic->lport->host, id);
+ WARN_ON_ONCE(!sc);
+ if (!sc)
+ return;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ WARN_ON_ONCE(!io_req);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ return;
+ }
+
+ /* firmware completed the io */
+ io_req->io_completed = 1;
+
+ /*
+ * if SCSI-ML has already issued abort on this command,
+ * ignore completion of the IO. The abts path will clean it up
+ */
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+ spin_unlock_irqrestore(io_lock, flags);
+ return;
+ }
+
+ /* Mark the IO as complete */
+ CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE;
+
+ icmnd_cmpl = &desc->u.icmnd_cmpl;
+
+ switch (hdr_status) {
+ case FCPIO_SUCCESS:
+ sc->result = (DID_OK << 16) | icmnd_cmpl->scsi_status;
+ xfer_len = scsi_bufflen(sc);
+ scsi_set_resid(sc, icmnd_cmpl->residual);
+
+ if (icmnd_cmpl->flags & FCPIO_ICMND_CMPL_RESID_UNDER)
+ xfer_len -= icmnd_cmpl->residual;
+
+ /*
+ * If queue_full, then try to reduce queue depth for all
+ * LUNS on the target. Todo: this should be accompanied
+ * by a periodic queue_depth rampup based on successful
+ * IO completion.
+ */
+ if (icmnd_cmpl->scsi_status == QUEUE_FULL) {
+ struct scsi_device *t_sdev;
+ int qd = 0;
+
+ shost_for_each_device(t_sdev, sc->device->host) {
+ if (t_sdev->id != sc->device->id)
+ continue;
+
+ if (t_sdev->queue_depth > 1) {
+ qd = scsi_track_queue_full
+ (t_sdev,
+ t_sdev->queue_depth - 1);
+ if (qd == -1)
+ qd = t_sdev->host->cmd_per_lun;
+ shost_printk(KERN_INFO,
+ fnic->lport->host,
+ "scsi[%d:%d:%d:%d"
+ "] queue full detected,"
+ "new depth = %d\n",
+ t_sdev->host->host_no,
+ t_sdev->channel,
+ t_sdev->id, t_sdev->lun,
+ t_sdev->queue_depth);
+ }
+ }
+ }
+ break;
+
+ case FCPIO_TIMEOUT: /* request was timed out */
+ sc->result = (DID_TIME_OUT << 16) | icmnd_cmpl->scsi_status;
+ break;
+
+ case FCPIO_ABORTED: /* request was aborted */
+ sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status;
+ break;
+
+ case FCPIO_DATA_CNT_MISMATCH: /* recv/sent more/less data than exp. */
+ scsi_set_resid(sc, icmnd_cmpl->residual);
+ sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status;
+ break;
+
+ case FCPIO_OUT_OF_RESOURCE: /* out of resources to complete request */
+ sc->result = (DID_REQUEUE << 16) | icmnd_cmpl->scsi_status;
+ break;
+ case FCPIO_INVALID_HEADER: /* header contains invalid data */
+ case FCPIO_INVALID_PARAM: /* some parameter in request invalid */
+ case FCPIO_REQ_NOT_SUPPORTED:/* request type is not supported */
+ case FCPIO_IO_NOT_FOUND: /* requested I/O was not found */
+ case FCPIO_SGL_INVALID: /* request was aborted due to sgl error */
+ case FCPIO_MSS_INVALID: /* request was aborted due to mss error */
+ case FCPIO_FW_ERR: /* request was terminated due fw error */
+ default:
+ shost_printk(KERN_ERR, fnic->lport->host, "hdr status = %s\n",
+ fnic_fcpio_status_to_str(hdr_status));
+ sc->result = (DID_ERROR << 16) | icmnd_cmpl->scsi_status;
+ break;
+ }
+
+ /* Break link with the SCSI command */
+ CMD_SP(sc) = NULL;
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+
+ mempool_free(io_req, fnic->io_req_pool);
+
+ if (sc->sc_data_direction == DMA_FROM_DEVICE) {
+ fnic->lport->host_stats.fcp_input_requests++;
+ fnic->fcp_input_bytes += xfer_len;
+ } else if (sc->sc_data_direction == DMA_TO_DEVICE) {
+ fnic->lport->host_stats.fcp_output_requests++;
+ fnic->fcp_output_bytes += xfer_len;
+ } else
+ fnic->lport->host_stats.fcp_control_requests++;
+
+ /* Call SCSI completion function to complete the IO */
+ if (sc->scsi_done)
+ sc->scsi_done(sc);
+
+}
+
+/* fnic_fcpio_itmf_cmpl_handler
+ * Routine to handle itmf completions
+ */
+static void fnic_fcpio_itmf_cmpl_handler(struct fnic *fnic,
+ struct fcpio_fw_req *desc)
+{
+ u8 type;
+ u8 hdr_status;
+ struct fcpio_tag tag;
+ u32 id;
+ struct scsi_cmnd *sc;
+ struct fnic_io_req *io_req;
+ unsigned long flags;
+ spinlock_t *io_lock;
+
+ fcpio_header_dec(&desc->hdr, &type, &hdr_status, &tag);
+ fcpio_tag_id_dec(&tag, &id);
+
+ if ((id & FNIC_TAG_MASK) >= FNIC_MAX_IO_REQ)
+ return;
+
+ sc = scsi_host_find_tag(fnic->lport->host, id & FNIC_TAG_MASK);
+ WARN_ON_ONCE(!sc);
+ if (!sc)
+ return;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ WARN_ON_ONCE(!io_req);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ return;
+ }
+
+ if (id & FNIC_TAG_ABORT) {
+ /* Completion of abort cmd */
+ if (CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING) {
+ /* This is a late completion. Ignore it */
+ spin_unlock_irqrestore(io_lock, flags);
+ return;
+ }
+ CMD_STATE(sc) = FNIC_IOREQ_ABTS_COMPLETE;
+ CMD_ABTS_STATUS(sc) = hdr_status;
+
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "abts cmpl recd. id %d status %s\n",
+ (int)(id & FNIC_TAG_MASK),
+ fnic_fcpio_status_to_str(hdr_status));
+
+ /*
+ * If scsi_eh thread is blocked waiting for abts to complete,
+ * signal completion to it. IO will be cleaned in the thread
+ * else clean it in this context
+ */
+ if (io_req->abts_done) {
+ complete(io_req->abts_done);
+ spin_unlock_irqrestore(io_lock, flags);
+ } else {
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "abts cmpl, completing IO\n");
+ CMD_SP(sc) = NULL;
+ sc->result = (DID_ERROR << 16);
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+ if (sc->scsi_done)
+ sc->scsi_done(sc);
+ }
+
+ } else if (id & FNIC_TAG_DEV_RST) {
+ /* Completion of device reset */
+ CMD_LR_STATUS(sc) = hdr_status;
+ CMD_STATE(sc) = FNIC_IOREQ_CMD_COMPLETE;
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "dev reset cmpl recd. id %d status %s\n",
+ (int)(id & FNIC_TAG_MASK),
+ fnic_fcpio_status_to_str(hdr_status));
+ if (io_req->dr_done)
+ complete(io_req->dr_done);
+ spin_unlock_irqrestore(io_lock, flags);
+
+ } else {
+ shost_printk(KERN_ERR, fnic->lport->host,
+ "Unexpected itmf io state %s tag %x\n",
+ fnic_ioreq_state_to_str(CMD_STATE(sc)), id);
+ spin_unlock_irqrestore(io_lock, flags);
+ }
+
+}
+
+/*
+ * fnic_fcpio_cmpl_handler
+ * Routine to service the cq for wq_copy
+ */
+static int fnic_fcpio_cmpl_handler(struct vnic_dev *vdev,
+ unsigned int cq_index,
+ struct fcpio_fw_req *desc)
+{
+ struct fnic *fnic = vnic_dev_priv(vdev);
+ int ret = 0;
+
+ switch (desc->hdr.type) {
+ case FCPIO_ACK: /* fw copied copy wq desc to its queue */
+ fnic_fcpio_ack_handler(fnic, cq_index, desc);
+ break;
+
+ case FCPIO_ICMND_CMPL: /* fw completed a command */
+ fnic_fcpio_icmnd_cmpl_handler(fnic, desc);
+ break;
+
+ case FCPIO_ITMF_CMPL: /* fw completed itmf (abort cmd, lun reset)*/
+ fnic_fcpio_itmf_cmpl_handler(fnic, desc);
+ break;
+
+ case FCPIO_FLOGI_REG_CMPL: /* fw completed flogi_reg */
+ ret = fnic_fcpio_flogi_reg_cmpl_handler(fnic, desc);
+ break;
+
+ case FCPIO_RESET_CMPL: /* fw completed reset */
+ ret = fnic_fcpio_fw_reset_cmpl_handler(fnic, desc);
+ break;
+
+ default:
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "firmware completion type %d\n",
+ desc->hdr.type);
+ break;
+ }
+
+ return ret;
+}
+
+/*
+ * fnic_wq_copy_cmpl_handler
+ * Routine to process wq copy
+ */
+int fnic_wq_copy_cmpl_handler(struct fnic *fnic, int copy_work_to_do)
+{
+ unsigned int wq_work_done = 0;
+ unsigned int i, cq_index;
+ unsigned int cur_work_done;
+
+ for (i = 0; i < fnic->wq_copy_count; i++) {
+ cq_index = i + fnic->raw_wq_count + fnic->rq_count;
+ cur_work_done = vnic_cq_copy_service(&fnic->cq[cq_index],
+ fnic_fcpio_cmpl_handler,
+ copy_work_to_do);
+ wq_work_done += cur_work_done;
+ }
+ return wq_work_done;
+}
+
+static void fnic_cleanup_io(struct fnic *fnic, int exclude_id)
+{
+ unsigned int i;
+ struct fnic_io_req *io_req;
+ unsigned long flags = 0;
+ struct scsi_cmnd *sc;
+ spinlock_t *io_lock;
+
+ for (i = 0; i < FNIC_MAX_IO_REQ; i++) {
+ if (i == exclude_id)
+ continue;
+
+ sc = scsi_host_find_tag(fnic->lport->host, i);
+ if (!sc)
+ continue;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ goto cleanup_scsi_cmd;
+ }
+
+ CMD_SP(sc) = NULL;
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ /*
+ * If there is a scsi_cmnd associated with this io_req, then
+ * free the corresponding state
+ */
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+
+cleanup_scsi_cmd:
+ sc->result = DID_TRANSPORT_DISRUPTED << 16;
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "fnic_cleanup_io:"
+ " DID_TRANSPORT_DISRUPTED\n");
+
+ /* Complete the command to SCSI */
+ if (sc->scsi_done)
+ sc->scsi_done(sc);
+ }
+}
+
+void fnic_wq_copy_cleanup_handler(struct vnic_wq_copy *wq,
+ struct fcpio_host_req *desc)
+{
+ u32 id;
+ struct fnic *fnic = vnic_dev_priv(wq->vdev);
+ struct fnic_io_req *io_req;
+ struct scsi_cmnd *sc;
+ unsigned long flags;
+ spinlock_t *io_lock;
+
+ /* get the tag reference */
+ fcpio_tag_id_dec(&desc->hdr.tag, &id);
+ id &= FNIC_TAG_MASK;
+
+ if (id >= FNIC_MAX_IO_REQ)
+ return;
+
+ sc = scsi_host_find_tag(fnic->lport->host, id);
+ if (!sc)
+ return;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+
+ /* Get the IO context which this desc refers to */
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+ /* fnic interrupts are turned off by now */
+
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ goto wq_copy_cleanup_scsi_cmd;
+ }
+
+ CMD_SP(sc) = NULL;
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+
+wq_copy_cleanup_scsi_cmd:
+ sc->result = DID_NO_CONNECT << 16;
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "wq_copy_cleanup_handler:"
+ " DID_NO_CONNECT\n");
+
+ if (sc->scsi_done)
+ sc->scsi_done(sc);
+}
+
+static inline int fnic_queue_abort_io_req(struct fnic *fnic, int tag,
+ u32 task_req, u8 *fc_lun,
+ struct fnic_io_req *io_req)
+{
+ struct vnic_wq_copy *wq = &fnic->wq_copy[0];
+ unsigned long flags;
+
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], flags);
+
+ if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+ free_wq_copy_descs(fnic, wq);
+
+ if (!vnic_wq_copy_desc_avail(wq)) {
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+ return 1;
+ }
+ fnic_queue_wq_copy_desc_itmf(wq, tag | FNIC_TAG_ABORT,
+ 0, task_req, tag, fc_lun, io_req->port_id,
+ fnic->config.ra_tov, fnic->config.ed_tov);
+
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], flags);
+ return 0;
+}
+
+void fnic_rport_exch_reset(struct fnic *fnic, u32 port_id)
+{
+ int tag;
+ struct fnic_io_req *io_req;
+ spinlock_t *io_lock;
+ unsigned long flags;
+ struct scsi_cmnd *sc;
+ struct scsi_lun fc_lun;
+ enum fnic_ioreq_state old_ioreq_state;
+
+ FNIC_SCSI_DBG(KERN_DEBUG,
+ fnic->lport->host,
+ "fnic_rport_reset_exch called portid 0x%06x\n",
+ port_id);
+
+ if (fnic->in_remove)
+ return;
+
+ for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) {
+ sc = scsi_host_find_tag(fnic->lport->host, tag);
+ if (!sc)
+ continue;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+ if (!io_req || io_req->port_id != port_id) {
+ spin_unlock_irqrestore(io_lock, flags);
+ continue;
+ }
+
+ /*
+ * Found IO that is still pending with firmware and
+ * belongs to rport that went away
+ */
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+ spin_unlock_irqrestore(io_lock, flags);
+ continue;
+ }
+ old_ioreq_state = CMD_STATE(sc);
+ CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
+ CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
+
+ BUG_ON(io_req->abts_done);
+
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "fnic_rport_reset_exch: Issuing abts\n");
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ /* Now queue the abort command to firmware */
+ int_to_scsilun(sc->device->lun, &fc_lun);
+
+ if (fnic_queue_abort_io_req(fnic, tag,
+ FCPIO_ITMF_ABT_TASK_TERM,
+ fc_lun.scsi_lun, io_req)) {
+ /*
+ * Revert the cmd state back to old state, if
+ * it hasnt changed in between. This cmd will get
+ * aborted later by scsi_eh, or cleaned up during
+ * lun reset
+ */
+ io_lock = fnic_io_lock_hash(fnic, sc);
+
+ spin_lock_irqsave(io_lock, flags);
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING)
+ CMD_STATE(sc) = old_ioreq_state;
+ spin_unlock_irqrestore(io_lock, flags);
+ }
+ }
+
+}
+
+void fnic_terminate_rport_io(struct fc_rport *rport)
+{
+ int tag;
+ struct fnic_io_req *io_req;
+ spinlock_t *io_lock;
+ unsigned long flags;
+ struct scsi_cmnd *sc;
+ struct scsi_lun fc_lun;
+ struct fc_rport_libfc_priv *rdata = rport->dd_data;
+ struct fc_lport *lport = rdata->local_port;
+ struct fnic *fnic = lport_priv(lport);
+ struct fc_rport *cmd_rport;
+ enum fnic_ioreq_state old_ioreq_state;
+
+ FNIC_SCSI_DBG(KERN_DEBUG,
+ fnic->lport->host, "fnic_terminate_rport_io called"
+ " wwpn 0x%llx, wwnn0x%llx, portid 0x%06x\n",
+ rport->port_name, rport->node_name,
+ rport->port_id);
+
+ if (fnic->in_remove)
+ return;
+
+ for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) {
+ sc = scsi_host_find_tag(fnic->lport->host, tag);
+ if (!sc)
+ continue;
+
+ cmd_rport = starget_to_rport(scsi_target(sc->device));
+ if (rport != cmd_rport)
+ continue;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+ if (!io_req || rport != cmd_rport) {
+ spin_unlock_irqrestore(io_lock, flags);
+ continue;
+ }
+
+ /*
+ * Found IO that is still pending with firmware and
+ * belongs to rport that went away
+ */
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+ spin_unlock_irqrestore(io_lock, flags);
+ continue;
+ }
+ old_ioreq_state = CMD_STATE(sc);
+ CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
+ CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
+
+ BUG_ON(io_req->abts_done);
+
+ FNIC_SCSI_DBG(KERN_DEBUG,
+ fnic->lport->host,
+ "fnic_terminate_rport_io: Issuing abts\n");
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ /* Now queue the abort command to firmware */
+ int_to_scsilun(sc->device->lun, &fc_lun);
+
+ if (fnic_queue_abort_io_req(fnic, tag,
+ FCPIO_ITMF_ABT_TASK_TERM,
+ fc_lun.scsi_lun, io_req)) {
+ /*
+ * Revert the cmd state back to old state, if
+ * it hasnt changed in between. This cmd will get
+ * aborted later by scsi_eh, or cleaned up during
+ * lun reset
+ */
+ io_lock = fnic_io_lock_hash(fnic, sc);
+
+ spin_lock_irqsave(io_lock, flags);
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING)
+ CMD_STATE(sc) = old_ioreq_state;
+ spin_unlock_irqrestore(io_lock, flags);
+ }
+ }
+
+}
+
+static void fnic_block_error_handler(struct scsi_cmnd *sc)
+{
+ struct Scsi_Host *shost = sc->device->host;
+ struct fc_rport *rport = starget_to_rport(scsi_target(sc->device));
+ unsigned long flags;
+
+ spin_lock_irqsave(shost->host_lock, flags);
+ while (rport->port_state == FC_PORTSTATE_BLOCKED) {
+ spin_unlock_irqrestore(shost->host_lock, flags);
+ msleep(1000);
+ spin_lock_irqsave(shost->host_lock, flags);
+ }
+ spin_unlock_irqrestore(shost->host_lock, flags);
+
+}
+
+/*
+ * This function is exported to SCSI for sending abort cmnds.
+ * A SCSI IO is represented by a io_req in the driver.
+ * The ioreq is linked to the SCSI Cmd, thus a link with the ULP's IO.
+ */
+int fnic_abort_cmd(struct scsi_cmnd *sc)
+{
+ struct fc_lport *lp;
+ struct fnic *fnic;
+ struct fnic_io_req *io_req;
+ struct fc_rport *rport;
+ spinlock_t *io_lock;
+ unsigned long flags;
+ int ret = SUCCESS;
+ u32 task_req;
+ struct scsi_lun fc_lun;
+ DECLARE_COMPLETION_ONSTACK(tm_done);
+
+ /* Wait for rport to unblock */
+ fnic_block_error_handler(sc);
+
+ /* Get local-port, check ready and link up */
+ lp = shost_priv(sc->device->host);
+
+ fnic = lport_priv(lp);
+ FNIC_SCSI_DBG(KERN_DEBUG,
+ fnic->lport->host,
+ "Abort Cmd called FCID 0x%x, LUN 0x%x TAG %d\n",
+ (starget_to_rport(scsi_target(sc->device)))->port_id,
+ sc->device->lun, sc->request->tag);
+
+ if (lp->state != LPORT_ST_READY || !(lp->link_up)) {
+ ret = FAILED;
+ goto fnic_abort_cmd_end;
+ }
+
+ /*
+ * Avoid a race between SCSI issuing the abort and the device
+ * completing the command.
+ *
+ * If the command is already completed by the fw cmpl code,
+ * we just return SUCCESS from here. This means that the abort
+ * succeeded. In the SCSI ML, since the timeout for command has
+ * happened, the completion wont actually complete the command
+ * and it will be considered as an aborted command
+ *
+ * The CMD_SP will not be cleared except while holding io_req_lock.
+ */
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ goto fnic_abort_cmd_end;
+ }
+
+ io_req->abts_done = &tm_done;
+
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+ spin_unlock_irqrestore(io_lock, flags);
+ goto wait_pending;
+ }
+ /*
+ * Command is still pending, need to abort it
+ * If the firmware completes the command after this point,
+ * the completion wont be done till mid-layer, since abort
+ * has already started.
+ */
+ CMD_STATE(sc) = FNIC_IOREQ_ABTS_PENDING;
+ CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ /*
+ * Check readiness of the remote port. If the path to remote
+ * port is up, then send abts to the remote port to terminate
+ * the IO. Else, just locally terminate the IO in the firmware
+ */
+ rport = starget_to_rport(scsi_target(sc->device));
+ if (fc_remote_port_chkready(rport) == 0)
+ task_req = FCPIO_ITMF_ABT_TASK;
+ else
+ task_req = FCPIO_ITMF_ABT_TASK_TERM;
+
+ /* Now queue the abort command to firmware */
+ int_to_scsilun(sc->device->lun, &fc_lun);
+
+ if (fnic_queue_abort_io_req(fnic, sc->request->tag, task_req,
+ fc_lun.scsi_lun, io_req)) {
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (io_req)
+ io_req->abts_done = NULL;
+ spin_unlock_irqrestore(io_lock, flags);
+ ret = FAILED;
+ goto fnic_abort_cmd_end;
+ }
+
+ /*
+ * We queued an abort IO, wait for its completion.
+ * Once the firmware completes the abort command, it will
+ * wake up this thread.
+ */
+ wait_pending:
+ wait_for_completion_timeout(&tm_done,
+ msecs_to_jiffies
+ (2 * fnic->config.ra_tov +
+ fnic->config.ed_tov));
+
+ /* Check the abort status */
+ spin_lock_irqsave(io_lock, flags);
+
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ ret = FAILED;
+ goto fnic_abort_cmd_end;
+ }
+ io_req->abts_done = NULL;
+
+ /* fw did not complete abort, timed out */
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+ spin_unlock_irqrestore(io_lock, flags);
+ ret = FAILED;
+ goto fnic_abort_cmd_end;
+ }
+
+ /*
+ * firmware completed the abort, check the status,
+ * free the io_req irrespective of failure or success
+ */
+ if (CMD_ABTS_STATUS(sc) != FCPIO_SUCCESS)
+ ret = FAILED;
+
+ CMD_SP(sc) = NULL;
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+
+fnic_abort_cmd_end:
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Returning from abort cmd %s\n",
+ (ret == SUCCESS) ?
+ "SUCCESS" : "FAILED");
+ return ret;
+}
+
+static inline int fnic_queue_dr_io_req(struct fnic *fnic,
+ struct scsi_cmnd *sc,
+ struct fnic_io_req *io_req)
+{
+ struct vnic_wq_copy *wq = &fnic->wq_copy[0];
+ struct scsi_lun fc_lun;
+ int ret = 0;
+ unsigned long intr_flags;
+
+ spin_lock_irqsave(&fnic->wq_copy_lock[0], intr_flags);
+
+ if (vnic_wq_copy_desc_avail(wq) <= fnic->wq_copy_desc_low[0])
+ free_wq_copy_descs(fnic, wq);
+
+ if (!vnic_wq_copy_desc_avail(wq)) {
+ ret = -EAGAIN;
+ goto lr_io_req_end;
+ }
+
+ /* fill in the lun info */
+ int_to_scsilun(sc->device->lun, &fc_lun);
+
+ fnic_queue_wq_copy_desc_itmf(wq, sc->request->tag | FNIC_TAG_DEV_RST,
+ 0, FCPIO_ITMF_LUN_RESET, SCSI_NO_TAG,
+ fc_lun.scsi_lun, io_req->port_id,
+ fnic->config.ra_tov, fnic->config.ed_tov);
+
+lr_io_req_end:
+ spin_unlock_irqrestore(&fnic->wq_copy_lock[0], intr_flags);
+
+ return ret;
+}
+
+/*
+ * Clean up any pending aborts on the lun
+ * For each outstanding IO on this lun, whose abort is not completed by fw,
+ * issue a local abort. Wait for abort to complete. Return 0 if all commands
+ * successfully aborted, 1 otherwise
+ */
+static int fnic_clean_pending_aborts(struct fnic *fnic,
+ struct scsi_cmnd *lr_sc)
+{
+ int tag;
+ struct fnic_io_req *io_req;
+ spinlock_t *io_lock;
+ unsigned long flags;
+ int ret = 0;
+ struct scsi_cmnd *sc;
+ struct fc_rport *rport;
+ struct scsi_lun fc_lun;
+ struct scsi_device *lun_dev = lr_sc->device;
+ DECLARE_COMPLETION_ONSTACK(tm_done);
+
+ for (tag = 0; tag < FNIC_MAX_IO_REQ; tag++) {
+ sc = scsi_host_find_tag(fnic->lport->host, tag);
+ /*
+ * ignore this lun reset cmd or cmds that do not belong to
+ * this lun
+ */
+ if (!sc || sc == lr_sc || sc->device != lun_dev)
+ continue;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+ if (!io_req || sc->device != lun_dev) {
+ spin_unlock_irqrestore(io_lock, flags);
+ continue;
+ }
+
+ /*
+ * Found IO that is still pending with firmware and
+ * belongs to the LUN that we are resetting
+ */
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Found IO in %s on lun\n",
+ fnic_ioreq_state_to_str(CMD_STATE(sc)));
+
+ BUG_ON(CMD_STATE(sc) != FNIC_IOREQ_ABTS_PENDING);
+
+ CMD_ABTS_STATUS(sc) = FCPIO_INVALID_CODE;
+ io_req->abts_done = &tm_done;
+ spin_unlock_irqrestore(io_lock, flags);
+
+ /* Now queue the abort command to firmware */
+ int_to_scsilun(sc->device->lun, &fc_lun);
+ rport = starget_to_rport(scsi_target(sc->device));
+
+ if (fnic_queue_abort_io_req(fnic, tag,
+ FCPIO_ITMF_ABT_TASK_TERM,
+ fc_lun.scsi_lun, io_req)) {
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (io_req)
+ io_req->abts_done = NULL;
+ spin_unlock_irqrestore(io_lock, flags);
+ ret = 1;
+ goto clean_pending_aborts_end;
+ }
+
+ wait_for_completion_timeout(&tm_done,
+ msecs_to_jiffies
+ (fnic->config.ed_tov));
+
+ /* Recheck cmd state to check if it is now aborted */
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ ret = 1;
+ goto clean_pending_aborts_end;
+ }
+
+ io_req->abts_done = NULL;
+
+ /* if abort is still pending with fw, fail */
+ if (CMD_STATE(sc) == FNIC_IOREQ_ABTS_PENDING) {
+ spin_unlock_irqrestore(io_lock, flags);
+ ret = 1;
+ goto clean_pending_aborts_end;
+ }
+ CMD_SP(sc) = NULL;
+ spin_unlock_irqrestore(io_lock, flags);
+
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+ }
+
+clean_pending_aborts_end:
+ return ret;
+}
+
+/*
+ * SCSI Eh thread issues a Lun Reset when one or more commands on a LUN
+ * fail to get aborted. It calls driver's eh_device_reset with a SCSI command
+ * on the LUN.
+ */
+int fnic_device_reset(struct scsi_cmnd *sc)
+{
+ struct fc_lport *lp;
+ struct fnic *fnic;
+ struct fnic_io_req *io_req;
+ struct fc_rport *rport;
+ int status;
+ int ret = FAILED;
+ spinlock_t *io_lock;
+ unsigned long flags;
+ DECLARE_COMPLETION_ONSTACK(tm_done);
+
+ /* Wait for rport to unblock */
+ fnic_block_error_handler(sc);
+
+ /* Get local-port, check ready and link up */
+ lp = shost_priv(sc->device->host);
+
+ fnic = lport_priv(lp);
+ FNIC_SCSI_DBG(KERN_DEBUG,
+ fnic->lport->host,
+ "Device reset called FCID 0x%x, LUN 0x%x\n",
+ (starget_to_rport(scsi_target(sc->device)))->port_id,
+ sc->device->lun);
+
+
+ if (lp->state != LPORT_ST_READY || !(lp->link_up))
+ goto fnic_device_reset_end;
+
+ /* Check if remote port up */
+ rport = starget_to_rport(scsi_target(sc->device));
+ if (fc_remote_port_chkready(rport))
+ goto fnic_device_reset_end;
+
+ io_lock = fnic_io_lock_hash(fnic, sc);
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+
+ /*
+ * If there is a io_req attached to this command, then use it,
+ * else allocate a new one.
+ */
+ if (!io_req) {
+ io_req = mempool_alloc(fnic->io_req_pool, GFP_ATOMIC);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ goto fnic_device_reset_end;
+ }
+ memset(io_req, 0, sizeof(*io_req));
+ io_req->port_id = rport->port_id;
+ CMD_SP(sc) = (char *)io_req;
+ }
+ io_req->dr_done = &tm_done;
+ CMD_STATE(sc) = FNIC_IOREQ_CMD_PENDING;
+ CMD_LR_STATUS(sc) = FCPIO_INVALID_CODE;
+ spin_unlock_irqrestore(io_lock, flags);
+
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host, "TAG %d\n",
+ sc->request->tag);
+
+ /*
+ * issue the device reset, if enqueue failed, clean up the ioreq
+ * and break assoc with scsi cmd
+ */
+ if (fnic_queue_dr_io_req(fnic, sc, io_req)) {
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (io_req)
+ io_req->dr_done = NULL;
+ goto fnic_device_reset_clean;
+ }
+
+ /*
+ * Wait on the local completion for LUN reset. The io_req may be
+ * freed while we wait since we hold no lock.
+ */
+ wait_for_completion_timeout(&tm_done,
+ msecs_to_jiffies(FNIC_LUN_RESET_TIMEOUT));
+
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (!io_req) {
+ spin_unlock_irqrestore(io_lock, flags);
+ goto fnic_device_reset_end;
+ }
+ io_req->dr_done = NULL;
+
+ status = CMD_LR_STATUS(sc);
+ spin_unlock_irqrestore(io_lock, flags);
+
+ /*
+ * If lun reset not completed, bail out with failed. io_req
+ * gets cleaned up during higher levels of EH
+ */
+ if (status == FCPIO_INVALID_CODE) {
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Device reset timed out\n");
+ goto fnic_device_reset_end;
+ }
+
+ /* Completed, but not successful, clean up the io_req, return fail */
+ if (status != FCPIO_SUCCESS) {
+ spin_lock_irqsave(io_lock, flags);
+ FNIC_SCSI_DBG(KERN_DEBUG,
+ fnic->lport->host,
+ "Device reset completed - failed\n");
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ goto fnic_device_reset_clean;
+ }
+
+ /*
+ * Clean up any aborts on this lun that have still not
+ * completed. If any of these fail, then LUN reset fails.
+ * clean_pending_aborts cleans all cmds on this lun except
+ * the lun reset cmd. If all cmds get cleaned, the lun reset
+ * succeeds
+ */
+ if (fnic_clean_pending_aborts(fnic, sc)) {
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Device reset failed"
+ " since could not abort all IOs\n");
+ goto fnic_device_reset_clean;
+ }
+
+ /* Clean lun reset command */
+ spin_lock_irqsave(io_lock, flags);
+ io_req = (struct fnic_io_req *)CMD_SP(sc);
+ if (io_req)
+ /* Completed, and successful */
+ ret = SUCCESS;
+
+fnic_device_reset_clean:
+ if (io_req)
+ CMD_SP(sc) = NULL;
+
+ spin_unlock_irqrestore(io_lock, flags);
+
+ if (io_req) {
+ fnic_release_ioreq_buf(fnic, io_req, sc);
+ mempool_free(io_req, fnic->io_req_pool);
+ }
+
+fnic_device_reset_end:
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Returning from device reset %s\n",
+ (ret == SUCCESS) ?
+ "SUCCESS" : "FAILED");
+ return ret;
+}
+
+/* Clean up all IOs, clean up libFC local port */
+int fnic_reset(struct Scsi_Host *shost)
+{
+ struct fc_lport *lp;
+ struct fnic *fnic;
+ int ret = SUCCESS;
+
+ lp = shost_priv(shost);
+ fnic = lport_priv(lp);
+
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "fnic_reset called\n");
+
+ /*
+ * Reset local port, this will clean up libFC exchanges,
+ * reset remote port sessions, and if link is up, begin flogi
+ */
+ if (lp->tt.lport_reset(lp))
+ ret = FAILED;
+
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "Returning from fnic reset %s\n",
+ (ret == SUCCESS) ?
+ "SUCCESS" : "FAILED");
+
+ return ret;
+}
+
+/*
+ * SCSI Error handling calls driver's eh_host_reset if all prior
+ * error handling levels return FAILED. If host reset completes
+ * successfully, and if link is up, then Fabric login begins.
+ *
+ * Host Reset is the highest level of error recovery. If this fails, then
+ * host is offlined by SCSI.
+ *
+ */
+int fnic_host_reset(struct scsi_cmnd *sc)
+{
+ int ret;
+ unsigned long wait_host_tmo;
+ struct Scsi_Host *shost = sc->device->host;
+ struct fc_lport *lp = shost_priv(shost);
+
+ /*
+ * If fnic_reset is successful, wait for fabric login to complete
+ * scsi-ml tries to send a TUR to every device if host reset is
+ * successful, so before returning to scsi, fabric should be up
+ */
+ ret = fnic_reset(shost);
+ if (ret == SUCCESS) {
+ wait_host_tmo = jiffies + FNIC_HOST_RESET_SETTLE_TIME * HZ;
+ ret = FAILED;
+ while (time_before(jiffies, wait_host_tmo)) {
+ if ((lp->state == LPORT_ST_READY) &&
+ (lp->link_up)) {
+ ret = SUCCESS;
+ break;
+ }
+ ssleep(1);
+ }
+ }
+
+ return ret;
+}
+
+/*
+ * This fxn is called from libFC when host is removed
+ */
+void fnic_scsi_abort_io(struct fc_lport *lp)
+{
+ int err = 0;
+ unsigned long flags;
+ enum fnic_state old_state;
+ struct fnic *fnic = lport_priv(lp);
+ DECLARE_COMPLETION_ONSTACK(remove_wait);
+
+ /* Issue firmware reset for fnic, wait for reset to complete */
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ fnic->remove_wait = &remove_wait;
+ old_state = fnic->state;
+ fnic->state = FNIC_IN_FC_TRANS_ETH_MODE;
+ vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr);
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ err = fnic_fw_reset_handler(fnic);
+ if (err) {
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE)
+ fnic->state = old_state;
+ fnic->remove_wait = NULL;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ return;
+ }
+
+ /* Wait for firmware reset to complete */
+ wait_for_completion_timeout(&remove_wait,
+ msecs_to_jiffies(FNIC_RMDEVICE_TIMEOUT));
+
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ fnic->remove_wait = NULL;
+ FNIC_SCSI_DBG(KERN_DEBUG, fnic->lport->host,
+ "fnic_scsi_abort_io %s\n",
+ (fnic->state == FNIC_IN_ETH_MODE) ?
+ "SUCCESS" : "FAILED");
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+}
+
+/*
+ * This fxn called from libFC to clean up driver IO state on link down
+ */
+void fnic_scsi_cleanup(struct fc_lport *lp)
+{
+ unsigned long flags;
+ enum fnic_state old_state;
+ struct fnic *fnic = lport_priv(lp);
+
+ /* issue fw reset */
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ old_state = fnic->state;
+ fnic->state = FNIC_IN_FC_TRANS_ETH_MODE;
+ vnic_dev_del_addr(fnic->vdev, fnic->data_src_addr);
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+
+ if (fnic_fw_reset_handler(fnic)) {
+ spin_lock_irqsave(&fnic->fnic_lock, flags);
+ if (fnic->state == FNIC_IN_FC_TRANS_ETH_MODE)
+ fnic->state = old_state;
+ spin_unlock_irqrestore(&fnic->fnic_lock, flags);
+ }
+
+}
+
+void fnic_empty_scsi_cleanup(struct fc_lport *lp)
+{
+}
+
+void fnic_exch_mgr_reset(struct fc_lport *lp, u32 sid, u32 did)
+{
+ struct fnic *fnic = lport_priv(lp);
+
+ /* Non-zero sid, nothing to do */
+ if (sid)
+ goto call_fc_exch_mgr_reset;
+
+ if (did) {
+ fnic_rport_exch_reset(fnic, did);
+ goto call_fc_exch_mgr_reset;
+ }
+
+ /*
+ * sid = 0, did = 0
+ * link down or device being removed
+ */
+ if (!fnic->in_remove)
+ fnic_scsi_cleanup(lp);
+ else
+ fnic_scsi_abort_io(lp);
+
+ /* call libFC exch mgr reset to reset its exchanges */
+call_fc_exch_mgr_reset:
+ fc_exch_mgr_reset(lp, sid, did);
+
+}
diff --git a/drivers/scsi/fnic/rq_enet_desc.h b/drivers/scsi/fnic/rq_enet_desc.h
new file mode 100644
index 00000000000..92e80ae6b72
--- /dev/null
+++ b/drivers/scsi/fnic/rq_enet_desc.h
@@ -0,0 +1,58 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _RQ_ENET_DESC_H_
+#define _RQ_ENET_DESC_H_
+
+/* Ethernet receive queue descriptor: 16B */
+struct rq_enet_desc {
+ __le64 address;
+ __le16 length_type;
+ u8 reserved[6];
+};
+
+enum rq_enet_type_types {
+ RQ_ENET_TYPE_ONLY_SOP = 0,
+ RQ_ENET_TYPE_NOT_SOP = 1,
+ RQ_ENET_TYPE_RESV2 = 2,
+ RQ_ENET_TYPE_RESV3 = 3,
+};
+
+#define RQ_ENET_ADDR_BITS 64
+#define RQ_ENET_LEN_BITS 14
+#define RQ_ENET_LEN_MASK ((1 << RQ_ENET_LEN_BITS) - 1)
+#define RQ_ENET_TYPE_BITS 2
+#define RQ_ENET_TYPE_MASK ((1 << RQ_ENET_TYPE_BITS) - 1)
+
+static inline void rq_enet_desc_enc(struct rq_enet_desc *desc,
+ u64 address, u8 type, u16 length)
+{
+ desc->address = cpu_to_le64(address);
+ desc->length_type = cpu_to_le16((length & RQ_ENET_LEN_MASK) |
+ ((type & RQ_ENET_TYPE_MASK) << RQ_ENET_LEN_BITS));
+}
+
+static inline void rq_enet_desc_dec(struct rq_enet_desc *desc,
+ u64 *address, u8 *type, u16 *length)
+{
+ *address = le64_to_cpu(desc->address);
+ *length = le16_to_cpu(desc->length_type) & RQ_ENET_LEN_MASK;
+ *type = (u8)((le16_to_cpu(desc->length_type) >> RQ_ENET_LEN_BITS) &
+ RQ_ENET_TYPE_MASK);
+}
+
+#endif /* _RQ_ENET_DESC_H_ */
diff --git a/drivers/scsi/fnic/vnic_cq.c b/drivers/scsi/fnic/vnic_cq.c
new file mode 100644
index 00000000000..c5db32eda5e
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_cq.c
@@ -0,0 +1,85 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include "vnic_dev.h"
+#include "vnic_cq.h"
+
+void vnic_cq_free(struct vnic_cq *cq)
+{
+ vnic_dev_free_desc_ring(cq->vdev, &cq->ring);
+
+ cq->ctrl = NULL;
+}
+
+int vnic_cq_alloc(struct vnic_dev *vdev, struct vnic_cq *cq, unsigned int index,
+ unsigned int desc_count, unsigned int desc_size)
+{
+ int err;
+
+ cq->index = index;
+ cq->vdev = vdev;
+
+ cq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_CQ, index);
+ if (!cq->ctrl) {
+ printk(KERN_ERR "Failed to hook CQ[%d] resource\n", index);
+ return -EINVAL;
+ }
+
+ err = vnic_dev_alloc_desc_ring(vdev, &cq->ring, desc_count, desc_size);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+void vnic_cq_init(struct vnic_cq *cq, unsigned int flow_control_enable,
+ unsigned int color_enable, unsigned int cq_head, unsigned int cq_tail,
+ unsigned int cq_tail_color, unsigned int interrupt_enable,
+ unsigned int cq_entry_enable, unsigned int cq_message_enable,
+ unsigned int interrupt_offset, u64 cq_message_addr)
+{
+ u64 paddr;
+
+ paddr = (u64)cq->ring.base_addr | VNIC_PADDR_TARGET;
+ writeq(paddr, &cq->ctrl->ring_base);
+ iowrite32(cq->ring.desc_count, &cq->ctrl->ring_size);
+ iowrite32(flow_control_enable, &cq->ctrl->flow_control_enable);
+ iowrite32(color_enable, &cq->ctrl->color_enable);
+ iowrite32(cq_head, &cq->ctrl->cq_head);
+ iowrite32(cq_tail, &cq->ctrl->cq_tail);
+ iowrite32(cq_tail_color, &cq->ctrl->cq_tail_color);
+ iowrite32(interrupt_enable, &cq->ctrl->interrupt_enable);
+ iowrite32(cq_entry_enable, &cq->ctrl->cq_entry_enable);
+ iowrite32(cq_message_enable, &cq->ctrl->cq_message_enable);
+ iowrite32(interrupt_offset, &cq->ctrl->interrupt_offset);
+ writeq(cq_message_addr, &cq->ctrl->cq_message_addr);
+}
+
+void vnic_cq_clean(struct vnic_cq *cq)
+{
+ cq->to_clean = 0;
+ cq->last_color = 0;
+
+ iowrite32(0, &cq->ctrl->cq_head);
+ iowrite32(0, &cq->ctrl->cq_tail);
+ iowrite32(1, &cq->ctrl->cq_tail_color);
+
+ vnic_dev_clear_desc_ring(&cq->ring);
+}
diff --git a/drivers/scsi/fnic/vnic_cq.h b/drivers/scsi/fnic/vnic_cq.h
new file mode 100644
index 00000000000..4ede6809fb1
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_cq.h
@@ -0,0 +1,121 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_CQ_H_
+#define _VNIC_CQ_H_
+
+#include "cq_desc.h"
+#include "vnic_dev.h"
+
+/*
+ * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth
+ * Driver) when both are built with CONFIG options =y
+ */
+#define vnic_cq_service fnic_cq_service
+#define vnic_cq_free fnic_cq_free
+#define vnic_cq_alloc fnic_cq_alloc
+#define vnic_cq_init fnic_cq_init
+#define vnic_cq_clean fnic_cq_clean
+
+/* Completion queue control */
+struct vnic_cq_ctrl {
+ u64 ring_base; /* 0x00 */
+ u32 ring_size; /* 0x08 */
+ u32 pad0;
+ u32 flow_control_enable; /* 0x10 */
+ u32 pad1;
+ u32 color_enable; /* 0x18 */
+ u32 pad2;
+ u32 cq_head; /* 0x20 */
+ u32 pad3;
+ u32 cq_tail; /* 0x28 */
+ u32 pad4;
+ u32 cq_tail_color; /* 0x30 */
+ u32 pad5;
+ u32 interrupt_enable; /* 0x38 */
+ u32 pad6;
+ u32 cq_entry_enable; /* 0x40 */
+ u32 pad7;
+ u32 cq_message_enable; /* 0x48 */
+ u32 pad8;
+ u32 interrupt_offset; /* 0x50 */
+ u32 pad9;
+ u64 cq_message_addr; /* 0x58 */
+ u32 pad10;
+};
+
+struct vnic_cq {
+ unsigned int index;
+ struct vnic_dev *vdev;
+ struct vnic_cq_ctrl __iomem *ctrl; /* memory-mapped */
+ struct vnic_dev_ring ring;
+ unsigned int to_clean;
+ unsigned int last_color;
+};
+
+static inline unsigned int vnic_cq_service(struct vnic_cq *cq,
+ unsigned int work_to_do,
+ int (*q_service)(struct vnic_dev *vdev, struct cq_desc *cq_desc,
+ u8 type, u16 q_number, u16 completed_index, void *opaque),
+ void *opaque)
+{
+ struct cq_desc *cq_desc;
+ unsigned int work_done = 0;
+ u16 q_number, completed_index;
+ u8 type, color;
+
+ cq_desc = (struct cq_desc *)((u8 *)cq->ring.descs +
+ cq->ring.desc_size * cq->to_clean);
+ cq_desc_dec(cq_desc, &type, &color,
+ &q_number, &completed_index);
+
+ while (color != cq->last_color) {
+
+ if ((*q_service)(cq->vdev, cq_desc, type,
+ q_number, completed_index, opaque))
+ break;
+
+ cq->to_clean++;
+ if (cq->to_clean == cq->ring.desc_count) {
+ cq->to_clean = 0;
+ cq->last_color = cq->last_color ? 0 : 1;
+ }
+
+ cq_desc = (struct cq_desc *)((u8 *)cq->ring.descs +
+ cq->ring.desc_size * cq->to_clean);
+ cq_desc_dec(cq_desc, &type, &color,
+ &q_number, &completed_index);
+
+ work_done++;
+ if (work_done >= work_to_do)
+ break;
+ }
+
+ return work_done;
+}
+
+void vnic_cq_free(struct vnic_cq *cq);
+int vnic_cq_alloc(struct vnic_dev *vdev, struct vnic_cq *cq, unsigned int index,
+ unsigned int desc_count, unsigned int desc_size);
+void vnic_cq_init(struct vnic_cq *cq, unsigned int flow_control_enable,
+ unsigned int color_enable, unsigned int cq_head, unsigned int cq_tail,
+ unsigned int cq_tail_color, unsigned int interrupt_enable,
+ unsigned int cq_entry_enable, unsigned int message_enable,
+ unsigned int interrupt_offset, u64 message_addr);
+void vnic_cq_clean(struct vnic_cq *cq);
+
+#endif /* _VNIC_CQ_H_ */
diff --git a/drivers/scsi/fnic/vnic_cq_copy.h b/drivers/scsi/fnic/vnic_cq_copy.h
new file mode 100644
index 00000000000..7901ce255a8
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_cq_copy.h
@@ -0,0 +1,62 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_CQ_COPY_H_
+#define _VNIC_CQ_COPY_H_
+
+#include "fcpio.h"
+
+static inline unsigned int vnic_cq_copy_service(
+ struct vnic_cq *cq,
+ int (*q_service)(struct vnic_dev *vdev,
+ unsigned int index,
+ struct fcpio_fw_req *desc),
+ unsigned int work_to_do)
+
+{
+ struct fcpio_fw_req *desc;
+ unsigned int work_done = 0;
+ u8 color;
+
+ desc = (struct fcpio_fw_req *)((u8 *)cq->ring.descs +
+ cq->ring.desc_size * cq->to_clean);
+ fcpio_color_dec(desc, &color);
+
+ while (color != cq->last_color) {
+
+ if ((*q_service)(cq->vdev, cq->index, desc))
+ break;
+
+ cq->to_clean++;
+ if (cq->to_clean == cq->ring.desc_count) {
+ cq->to_clean = 0;
+ cq->last_color = cq->last_color ? 0 : 1;
+ }
+
+ desc = (struct fcpio_fw_req *)((u8 *)cq->ring.descs +
+ cq->ring.desc_size * cq->to_clean);
+ fcpio_color_dec(desc, &color);
+
+ work_done++;
+ if (work_done >= work_to_do)
+ break;
+ }
+
+ return work_done;
+}
+
+#endif /* _VNIC_CQ_COPY_H_ */
diff --git a/drivers/scsi/fnic/vnic_dev.c b/drivers/scsi/fnic/vnic_dev.c
new file mode 100644
index 00000000000..56677064508
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_dev.c
@@ -0,0 +1,690 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include <linux/if_ether.h>
+#include "vnic_resource.h"
+#include "vnic_devcmd.h"
+#include "vnic_dev.h"
+#include "vnic_stats.h"
+
+struct vnic_res {
+ void __iomem *vaddr;
+ unsigned int count;
+};
+
+struct vnic_dev {
+ void *priv;
+ struct pci_dev *pdev;
+ struct vnic_res res[RES_TYPE_MAX];
+ enum vnic_dev_intr_mode intr_mode;
+ struct vnic_devcmd __iomem *devcmd;
+ struct vnic_devcmd_notify *notify;
+ struct vnic_devcmd_notify notify_copy;
+ dma_addr_t notify_pa;
+ u32 *linkstatus;
+ dma_addr_t linkstatus_pa;
+ struct vnic_stats *stats;
+ dma_addr_t stats_pa;
+ struct vnic_devcmd_fw_info *fw_info;
+ dma_addr_t fw_info_pa;
+};
+
+#define VNIC_MAX_RES_HDR_SIZE \
+ (sizeof(struct vnic_resource_header) + \
+ sizeof(struct vnic_resource) * RES_TYPE_MAX)
+#define VNIC_RES_STRIDE 128
+
+void *vnic_dev_priv(struct vnic_dev *vdev)
+{
+ return vdev->priv;
+}
+
+static int vnic_dev_discover_res(struct vnic_dev *vdev,
+ struct vnic_dev_bar *bar)
+{
+ struct vnic_resource_header __iomem *rh;
+ struct vnic_resource __iomem *r;
+ u8 type;
+
+ if (bar->len < VNIC_MAX_RES_HDR_SIZE) {
+ printk(KERN_ERR "vNIC BAR0 res hdr length error\n");
+ return -EINVAL;
+ }
+
+ rh = bar->vaddr;
+ if (!rh) {
+ printk(KERN_ERR "vNIC BAR0 res hdr not mem-mapped\n");
+ return -EINVAL;
+ }
+
+ if (ioread32(&rh->magic) != VNIC_RES_MAGIC ||
+ ioread32(&rh->version) != VNIC_RES_VERSION) {
+ printk(KERN_ERR "vNIC BAR0 res magic/version error "
+ "exp (%lx/%lx) curr (%x/%x)\n",
+ VNIC_RES_MAGIC, VNIC_RES_VERSION,
+ ioread32(&rh->magic), ioread32(&rh->version));
+ return -EINVAL;
+ }
+
+ r = (struct vnic_resource __iomem *)(rh + 1);
+
+ while ((type = ioread8(&r->type)) != RES_TYPE_EOL) {
+
+ u8 bar_num = ioread8(&r->bar);
+ u32 bar_offset = ioread32(&r->bar_offset);
+ u32 count = ioread32(&r->count);
+ u32 len;
+
+ r++;
+
+ if (bar_num != 0) /* only mapping in BAR0 resources */
+ continue;
+
+ switch (type) {
+ case RES_TYPE_WQ:
+ case RES_TYPE_RQ:
+ case RES_TYPE_CQ:
+ case RES_TYPE_INTR_CTRL:
+ /* each count is stride bytes long */
+ len = count * VNIC_RES_STRIDE;
+ if (len + bar_offset > bar->len) {
+ printk(KERN_ERR "vNIC BAR0 resource %d "
+ "out-of-bounds, offset 0x%x + "
+ "size 0x%x > bar len 0x%lx\n",
+ type, bar_offset,
+ len,
+ bar->len);
+ return -EINVAL;
+ }
+ break;
+ case RES_TYPE_INTR_PBA_LEGACY:
+ case RES_TYPE_DEVCMD:
+ len = count;
+ break;
+ default:
+ continue;
+ }
+
+ vdev->res[type].count = count;
+ vdev->res[type].vaddr = (char __iomem *)bar->vaddr + bar_offset;
+ }
+
+ return 0;
+}
+
+unsigned int vnic_dev_get_res_count(struct vnic_dev *vdev,
+ enum vnic_res_type type)
+{
+ return vdev->res[type].count;
+}
+
+void __iomem *vnic_dev_get_res(struct vnic_dev *vdev, enum vnic_res_type type,
+ unsigned int index)
+{
+ if (!vdev->res[type].vaddr)
+ return NULL;
+
+ switch (type) {
+ case RES_TYPE_WQ:
+ case RES_TYPE_RQ:
+ case RES_TYPE_CQ:
+ case RES_TYPE_INTR_CTRL:
+ return (char __iomem *)vdev->res[type].vaddr +
+ index * VNIC_RES_STRIDE;
+ default:
+ return (char __iomem *)vdev->res[type].vaddr;
+ }
+}
+
+unsigned int vnic_dev_desc_ring_size(struct vnic_dev_ring *ring,
+ unsigned int desc_count,
+ unsigned int desc_size)
+{
+ /* The base address of the desc rings must be 512 byte aligned.
+ * Descriptor count is aligned to groups of 32 descriptors. A
+ * count of 0 means the maximum 4096 descriptors. Descriptor
+ * size is aligned to 16 bytes.
+ */
+
+ unsigned int count_align = 32;
+ unsigned int desc_align = 16;
+
+ ring->base_align = 512;
+
+ if (desc_count == 0)
+ desc_count = 4096;
+
+ ring->desc_count = ALIGN(desc_count, count_align);
+
+ ring->desc_size = ALIGN(desc_size, desc_align);
+
+ ring->size = ring->desc_count * ring->desc_size;
+ ring->size_unaligned = ring->size + ring->base_align;
+
+ return ring->size_unaligned;
+}
+
+void vnic_dev_clear_desc_ring(struct vnic_dev_ring *ring)
+{
+ memset(ring->descs, 0, ring->size);
+}
+
+int vnic_dev_alloc_desc_ring(struct vnic_dev *vdev, struct vnic_dev_ring *ring,
+ unsigned int desc_count, unsigned int desc_size)
+{
+ vnic_dev_desc_ring_size(ring, desc_count, desc_size);
+
+ ring->descs_unaligned = pci_alloc_consistent(vdev->pdev,
+ ring->size_unaligned,
+ &ring->base_addr_unaligned);
+
+ if (!ring->descs_unaligned) {
+ printk(KERN_ERR
+ "Failed to allocate ring (size=%d), aborting\n",
+ (int)ring->size);
+ return -ENOMEM;
+ }
+
+ ring->base_addr = ALIGN(ring->base_addr_unaligned,
+ ring->base_align);
+ ring->descs = (u8 *)ring->descs_unaligned +
+ (ring->base_addr - ring->base_addr_unaligned);
+
+ vnic_dev_clear_desc_ring(ring);
+
+ ring->desc_avail = ring->desc_count - 1;
+
+ return 0;
+}
+
+void vnic_dev_free_desc_ring(struct vnic_dev *vdev, struct vnic_dev_ring *ring)
+{
+ if (ring->descs) {
+ pci_free_consistent(vdev->pdev,
+ ring->size_unaligned,
+ ring->descs_unaligned,
+ ring->base_addr_unaligned);
+ ring->descs = NULL;
+ }
+}
+
+int vnic_dev_cmd(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd,
+ u64 *a0, u64 *a1, int wait)
+{
+ struct vnic_devcmd __iomem *devcmd = vdev->devcmd;
+ int delay;
+ u32 status;
+ int dev_cmd_err[] = {
+ /* convert from fw's version of error.h to host's version */
+ 0, /* ERR_SUCCESS */
+ EINVAL, /* ERR_EINVAL */
+ EFAULT, /* ERR_EFAULT */
+ EPERM, /* ERR_EPERM */
+ EBUSY, /* ERR_EBUSY */
+ };
+ int err;
+
+ status = ioread32(&devcmd->status);
+ if (status & STAT_BUSY) {
+ printk(KERN_ERR "Busy devcmd %d\n", _CMD_N(cmd));
+ return -EBUSY;
+ }
+
+ if (_CMD_DIR(cmd) & _CMD_DIR_WRITE) {
+ writeq(*a0, &devcmd->args[0]);
+ writeq(*a1, &devcmd->args[1]);
+ wmb();
+ }
+
+ iowrite32(cmd, &devcmd->cmd);
+
+ if ((_CMD_FLAGS(cmd) & _CMD_FLAGS_NOWAIT))
+ return 0;
+
+ for (delay = 0; delay < wait; delay++) {
+
+ udelay(100);
+
+ status = ioread32(&devcmd->status);
+ if (!(status & STAT_BUSY)) {
+
+ if (status & STAT_ERROR) {
+ err = dev_cmd_err[(int)readq(&devcmd->args[0])];
+ printk(KERN_ERR "Error %d devcmd %d\n",
+ err, _CMD_N(cmd));
+ return -err;
+ }
+
+ if (_CMD_DIR(cmd) & _CMD_DIR_READ) {
+ rmb();
+ *a0 = readq(&devcmd->args[0]);
+ *a1 = readq(&devcmd->args[1]);
+ }
+
+ return 0;
+ }
+ }
+
+ printk(KERN_ERR "Timedout devcmd %d\n", _CMD_N(cmd));
+ return -ETIMEDOUT;
+}
+
+int vnic_dev_fw_info(struct vnic_dev *vdev,
+ struct vnic_devcmd_fw_info **fw_info)
+{
+ u64 a0, a1 = 0;
+ int wait = 1000;
+ int err = 0;
+
+ if (!vdev->fw_info) {
+ vdev->fw_info = pci_alloc_consistent(vdev->pdev,
+ sizeof(struct vnic_devcmd_fw_info),
+ &vdev->fw_info_pa);
+ if (!vdev->fw_info)
+ return -ENOMEM;
+
+ a0 = vdev->fw_info_pa;
+
+ /* only get fw_info once and cache it */
+ err = vnic_dev_cmd(vdev, CMD_MCPU_FW_INFO, &a0, &a1, wait);
+ }
+
+ *fw_info = vdev->fw_info;
+
+ return err;
+}
+
+int vnic_dev_spec(struct vnic_dev *vdev, unsigned int offset, unsigned int size,
+ void *value)
+{
+ u64 a0, a1;
+ int wait = 1000;
+ int err;
+
+ a0 = offset;
+ a1 = size;
+
+ err = vnic_dev_cmd(vdev, CMD_DEV_SPEC, &a0, &a1, wait);
+
+ switch (size) {
+ case 1:
+ *(u8 *)value = (u8)a0;
+ break;
+ case 2:
+ *(u16 *)value = (u16)a0;
+ break;
+ case 4:
+ *(u32 *)value = (u32)a0;
+ break;
+ case 8:
+ *(u64 *)value = a0;
+ break;
+ default:
+ BUG();
+ break;
+ }
+
+ return err;
+}
+
+int vnic_dev_stats_clear(struct vnic_dev *vdev)
+{
+ u64 a0 = 0, a1 = 0;
+ int wait = 1000;
+ return vnic_dev_cmd(vdev, CMD_STATS_CLEAR, &a0, &a1, wait);
+}
+
+int vnic_dev_stats_dump(struct vnic_dev *vdev, struct vnic_stats **stats)
+{
+ u64 a0, a1;
+ int wait = 1000;
+
+ if (!vdev->stats) {
+ vdev->stats = pci_alloc_consistent(vdev->pdev,
+ sizeof(struct vnic_stats), &vdev->stats_pa);
+ if (!vdev->stats)
+ return -ENOMEM;
+ }
+
+ *stats = vdev->stats;
+ a0 = vdev->stats_pa;
+ a1 = sizeof(struct vnic_stats);
+
+ return vnic_dev_cmd(vdev, CMD_STATS_DUMP, &a0, &a1, wait);
+}
+
+int vnic_dev_close(struct vnic_dev *vdev)
+{
+ u64 a0 = 0, a1 = 0;
+ int wait = 1000;
+ return vnic_dev_cmd(vdev, CMD_CLOSE, &a0, &a1, wait);
+}
+
+int vnic_dev_enable(struct vnic_dev *vdev)
+{
+ u64 a0 = 0, a1 = 0;
+ int wait = 1000;
+ return vnic_dev_cmd(vdev, CMD_ENABLE, &a0, &a1, wait);
+}
+
+int vnic_dev_disable(struct vnic_dev *vdev)
+{
+ u64 a0 = 0, a1 = 0;
+ int wait = 1000;
+ return vnic_dev_cmd(vdev, CMD_DISABLE, &a0, &a1, wait);
+}
+
+int vnic_dev_open(struct vnic_dev *vdev, int arg)
+{
+ u64 a0 = (u32)arg, a1 = 0;
+ int wait = 1000;
+ return vnic_dev_cmd(vdev, CMD_OPEN, &a0, &a1, wait);
+}
+
+int vnic_dev_open_done(struct vnic_dev *vdev, int *done)
+{
+ u64 a0 = 0, a1 = 0;
+ int wait = 1000;
+ int err;
+
+ *done = 0;
+
+ err = vnic_dev_cmd(vdev, CMD_OPEN_STATUS, &a0, &a1, wait);
+ if (err)
+ return err;
+
+ *done = (a0 == 0);
+
+ return 0;
+}
+
+int vnic_dev_soft_reset(struct vnic_dev *vdev, int arg)
+{
+ u64 a0 = (u32)arg, a1 = 0;
+ int wait = 1000;
+ return vnic_dev_cmd(vdev, CMD_SOFT_RESET, &a0, &a1, wait);
+}
+
+int vnic_dev_soft_reset_done(struct vnic_dev *vdev, int *done)
+{
+ u64 a0 = 0, a1 = 0;
+ int wait = 1000;
+ int err;
+
+ *done = 0;
+
+ err = vnic_dev_cmd(vdev, CMD_SOFT_RESET_STATUS, &a0, &a1, wait);
+ if (err)
+ return err;
+
+ *done = (a0 == 0);
+
+ return 0;
+}
+
+int vnic_dev_hang_notify(struct vnic_dev *vdev)
+{
+ u64 a0, a1;
+ int wait = 1000;
+ return vnic_dev_cmd(vdev, CMD_HANG_NOTIFY, &a0, &a1, wait);
+}
+
+int vnic_dev_mac_addr(struct vnic_dev *vdev, u8 *mac_addr)
+{
+ u64 a0, a1;
+ int wait = 1000;
+ int err, i;
+
+ for (i = 0; i < ETH_ALEN; i++)
+ mac_addr[i] = 0;
+
+ err = vnic_dev_cmd(vdev, CMD_MAC_ADDR, &a0, &a1, wait);
+ if (err)
+ return err;
+
+ for (i = 0; i < ETH_ALEN; i++)
+ mac_addr[i] = ((u8 *)&a0)[i];
+
+ return 0;
+}
+
+void vnic_dev_packet_filter(struct vnic_dev *vdev, int directed, int multicast,
+ int broadcast, int promisc, int allmulti)
+{
+ u64 a0, a1 = 0;
+ int wait = 1000;
+ int err;
+
+ a0 = (directed ? CMD_PFILTER_DIRECTED : 0) |
+ (multicast ? CMD_PFILTER_MULTICAST : 0) |
+ (broadcast ? CMD_PFILTER_BROADCAST : 0) |
+ (promisc ? CMD_PFILTER_PROMISCUOUS : 0) |
+ (allmulti ? CMD_PFILTER_ALL_MULTICAST : 0);
+
+ err = vnic_dev_cmd(vdev, CMD_PACKET_FILTER, &a0, &a1, wait);
+ if (err)
+ printk(KERN_ERR "Can't set packet filter\n");
+}
+
+void vnic_dev_add_addr(struct vnic_dev *vdev, u8 *addr)
+{
+ u64 a0 = 0, a1 = 0;
+ int wait = 1000;
+ int err;
+ int i;
+
+ for (i = 0; i < ETH_ALEN; i++)
+ ((u8 *)&a0)[i] = addr[i];
+
+ err = vnic_dev_cmd(vdev, CMD_ADDR_ADD, &a0, &a1, wait);
+ if (err)
+ printk(KERN_ERR
+ "Can't add addr [%02x:%02x:%02x:%02x:%02x:%02x], %d\n",
+ addr[0], addr[1], addr[2], addr[3], addr[4], addr[5],
+ err);
+}
+
+void vnic_dev_del_addr(struct vnic_dev *vdev, u8 *addr)
+{
+ u64 a0 = 0, a1 = 0;
+ int wait = 1000;
+ int err;
+ int i;
+
+ for (i = 0; i < ETH_ALEN; i++)
+ ((u8 *)&a0)[i] = addr[i];
+
+ err = vnic_dev_cmd(vdev, CMD_ADDR_DEL, &a0, &a1, wait);
+ if (err)
+ printk(KERN_ERR
+ "Can't del addr [%02x:%02x:%02x:%02x:%02x:%02x], %d\n",
+ addr[0], addr[1], addr[2], addr[3], addr[4], addr[5],
+ err);
+}
+
+int vnic_dev_notify_set(struct vnic_dev *vdev, u16 intr)
+{
+ u64 a0, a1;
+ int wait = 1000;
+
+ if (!vdev->notify) {
+ vdev->notify = pci_alloc_consistent(vdev->pdev,
+ sizeof(struct vnic_devcmd_notify),
+ &vdev->notify_pa);
+ if (!vdev->notify)
+ return -ENOMEM;
+ }
+
+ a0 = vdev->notify_pa;
+ a1 = ((u64)intr << 32) & 0x0000ffff00000000ULL;
+ a1 += sizeof(struct vnic_devcmd_notify);
+
+ return vnic_dev_cmd(vdev, CMD_NOTIFY, &a0, &a1, wait);
+}
+
+void vnic_dev_notify_unset(struct vnic_dev *vdev)
+{
+ u64 a0, a1;
+ int wait = 1000;
+
+ a0 = 0; /* paddr = 0 to unset notify buffer */
+ a1 = 0x0000ffff00000000ULL; /* intr num = -1 to unreg for intr */
+ a1 += sizeof(struct vnic_devcmd_notify);
+
+ vnic_dev_cmd(vdev, CMD_NOTIFY, &a0, &a1, wait);
+}
+
+static int vnic_dev_notify_ready(struct vnic_dev *vdev)
+{
+ u32 *words;
+ unsigned int nwords = sizeof(struct vnic_devcmd_notify) / 4;
+ unsigned int i;
+ u32 csum;
+
+ if (!vdev->notify)
+ return 0;
+
+ do {
+ csum = 0;
+ memcpy(&vdev->notify_copy, vdev->notify,
+ sizeof(struct vnic_devcmd_notify));
+ words = (u32 *)&vdev->notify_copy;
+ for (i = 1; i < nwords; i++)
+ csum += words[i];
+ } while (csum != words[0]);
+
+ return 1;
+}
+
+int vnic_dev_init(struct vnic_dev *vdev, int arg)
+{
+ u64 a0 = (u32)arg, a1 = 0;
+ int wait = 1000;
+ return vnic_dev_cmd(vdev, CMD_INIT, &a0, &a1, wait);
+}
+
+int vnic_dev_link_status(struct vnic_dev *vdev)
+{
+ if (vdev->linkstatus)
+ return *vdev->linkstatus;
+
+ if (!vnic_dev_notify_ready(vdev))
+ return 0;
+
+ return vdev->notify_copy.link_state;
+}
+
+u32 vnic_dev_port_speed(struct vnic_dev *vdev)
+{
+ if (!vnic_dev_notify_ready(vdev))
+ return 0;
+
+ return vdev->notify_copy.port_speed;
+}
+
+u32 vnic_dev_msg_lvl(struct vnic_dev *vdev)
+{
+ if (!vnic_dev_notify_ready(vdev))
+ return 0;
+
+ return vdev->notify_copy.msglvl;
+}
+
+u32 vnic_dev_mtu(struct vnic_dev *vdev)
+{
+ if (!vnic_dev_notify_ready(vdev))
+ return 0;
+
+ return vdev->notify_copy.mtu;
+}
+
+u32 vnic_dev_link_down_cnt(struct vnic_dev *vdev)
+{
+ if (!vnic_dev_notify_ready(vdev))
+ return 0;
+
+ return vdev->notify_copy.link_down_cnt;
+}
+
+void vnic_dev_set_intr_mode(struct vnic_dev *vdev,
+ enum vnic_dev_intr_mode intr_mode)
+{
+ vdev->intr_mode = intr_mode;
+}
+
+enum vnic_dev_intr_mode vnic_dev_get_intr_mode(
+ struct vnic_dev *vdev)
+{
+ return vdev->intr_mode;
+}
+
+void vnic_dev_unregister(struct vnic_dev *vdev)
+{
+ if (vdev) {
+ if (vdev->notify)
+ pci_free_consistent(vdev->pdev,
+ sizeof(struct vnic_devcmd_notify),
+ vdev->notify,
+ vdev->notify_pa);
+ if (vdev->linkstatus)
+ pci_free_consistent(vdev->pdev,
+ sizeof(u32),
+ vdev->linkstatus,
+ vdev->linkstatus_pa);
+ if (vdev->stats)
+ pci_free_consistent(vdev->pdev,
+ sizeof(struct vnic_dev),
+ vdev->stats, vdev->stats_pa);
+ if (vdev->fw_info)
+ pci_free_consistent(vdev->pdev,
+ sizeof(struct vnic_devcmd_fw_info),
+ vdev->fw_info, vdev->fw_info_pa);
+ kfree(vdev);
+ }
+}
+
+struct vnic_dev *vnic_dev_register(struct vnic_dev *vdev,
+ void *priv, struct pci_dev *pdev, struct vnic_dev_bar *bar)
+{
+ if (!vdev) {
+ vdev = kzalloc(sizeof(struct vnic_dev), GFP_KERNEL);
+ if (!vdev)
+ return NULL;
+ }
+
+ vdev->priv = priv;
+ vdev->pdev = pdev;
+
+ if (vnic_dev_discover_res(vdev, bar))
+ goto err_out;
+
+ vdev->devcmd = vnic_dev_get_res(vdev, RES_TYPE_DEVCMD, 0);
+ if (!vdev->devcmd)
+ goto err_out;
+
+ return vdev;
+
+err_out:
+ vnic_dev_unregister(vdev);
+ return NULL;
+}
diff --git a/drivers/scsi/fnic/vnic_dev.h b/drivers/scsi/fnic/vnic_dev.h
new file mode 100644
index 00000000000..f9935a8a5a0
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_dev.h
@@ -0,0 +1,161 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_DEV_H_
+#define _VNIC_DEV_H_
+
+#include "vnic_resource.h"
+#include "vnic_devcmd.h"
+
+/*
+ * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth
+ * Driver) when both are built with CONFIG options =y
+ */
+#define vnic_dev_priv fnic_dev_priv
+#define vnic_dev_get_res_count fnic_dev_get_res_count
+#define vnic_dev_get_res fnic_dev_get_res
+#define vnic_dev_desc_ring_size fnic_dev_desc_ring_siz
+#define vnic_dev_clear_desc_ring fnic_dev_clear_desc_ring
+#define vnic_dev_alloc_desc_ring fnic_dev_alloc_desc_ring
+#define vnic_dev_free_desc_ring fnic_dev_free_desc_ring
+#define vnic_dev_cmd fnic_dev_cmd
+#define vnic_dev_fw_info fnic_dev_fw_info
+#define vnic_dev_spec fnic_dev_spec
+#define vnic_dev_stats_clear fnic_dev_stats_clear
+#define vnic_dev_stats_dump fnic_dev_stats_dump
+#define vnic_dev_hang_notify fnic_dev_hang_notify
+#define vnic_dev_packet_filter fnic_dev_packet_filter
+#define vnic_dev_add_addr fnic_dev_add_addr
+#define vnic_dev_del_addr fnic_dev_del_addr
+#define vnic_dev_mac_addr fnic_dev_mac_addr
+#define vnic_dev_notify_set fnic_dev_notify_set
+#define vnic_dev_notify_unset fnic_dev_notify_unset
+#define vnic_dev_link_status fnic_dev_link_status
+#define vnic_dev_port_speed fnic_dev_port_speed
+#define vnic_dev_msg_lvl fnic_dev_msg_lvl
+#define vnic_dev_mtu fnic_dev_mtu
+#define vnic_dev_link_down_cnt fnic_dev_link_down_cnt
+#define vnic_dev_close fnic_dev_close
+#define vnic_dev_enable fnic_dev_enable
+#define vnic_dev_disable fnic_dev_disable
+#define vnic_dev_open fnic_dev_open
+#define vnic_dev_open_done fnic_dev_open_done
+#define vnic_dev_init fnic_dev_init
+#define vnic_dev_soft_reset fnic_dev_soft_reset
+#define vnic_dev_soft_reset_done fnic_dev_soft_reset_done
+#define vnic_dev_set_intr_mode fnic_dev_set_intr_mode
+#define vnic_dev_get_intr_mode fnic_dev_get_intr_mode
+#define vnic_dev_unregister fnic_dev_unregister
+#define vnic_dev_register fnic_dev_register
+
+#ifndef VNIC_PADDR_TARGET
+#define VNIC_PADDR_TARGET 0x0000000000000000ULL
+#endif
+
+#ifndef readq
+static inline u64 readq(void __iomem *reg)
+{
+ return ((u64)readl(reg + 0x4UL) << 32) | (u64)readl(reg);
+}
+
+static inline void writeq(u64 val, void __iomem *reg)
+{
+ writel(val & 0xffffffff, reg);
+ writel(val >> 32, reg + 0x4UL);
+}
+#endif
+
+enum vnic_dev_intr_mode {
+ VNIC_DEV_INTR_MODE_UNKNOWN,
+ VNIC_DEV_INTR_MODE_INTX,
+ VNIC_DEV_INTR_MODE_MSI,
+ VNIC_DEV_INTR_MODE_MSIX,
+};
+
+struct vnic_dev_bar {
+ void __iomem *vaddr;
+ dma_addr_t bus_addr;
+ unsigned long len;
+};
+
+struct vnic_dev_ring {
+ void *descs;
+ size_t size;
+ dma_addr_t base_addr;
+ size_t base_align;
+ void *descs_unaligned;
+ size_t size_unaligned;
+ dma_addr_t base_addr_unaligned;
+ unsigned int desc_size;
+ unsigned int desc_count;
+ unsigned int desc_avail;
+};
+
+struct vnic_dev;
+struct vnic_stats;
+
+void *vnic_dev_priv(struct vnic_dev *vdev);
+unsigned int vnic_dev_get_res_count(struct vnic_dev *vdev,
+ enum vnic_res_type type);
+void __iomem *vnic_dev_get_res(struct vnic_dev *vdev, enum vnic_res_type type,
+ unsigned int index);
+unsigned int vnic_dev_desc_ring_size(struct vnic_dev_ring *ring,
+ unsigned int desc_count,
+ unsigned int desc_size);
+void vnic_dev_clear_desc_ring(struct vnic_dev_ring *ring);
+int vnic_dev_alloc_desc_ring(struct vnic_dev *vdev, struct vnic_dev_ring *ring,
+ unsigned int desc_count, unsigned int desc_size);
+void vnic_dev_free_desc_ring(struct vnic_dev *vdev,
+ struct vnic_dev_ring *ring);
+int vnic_dev_cmd(struct vnic_dev *vdev, enum vnic_devcmd_cmd cmd,
+ u64 *a0, u64 *a1, int wait);
+int vnic_dev_fw_info(struct vnic_dev *vdev,
+ struct vnic_devcmd_fw_info **fw_info);
+int vnic_dev_spec(struct vnic_dev *vdev, unsigned int offset,
+ unsigned int size, void *value);
+int vnic_dev_stats_clear(struct vnic_dev *vdev);
+int vnic_dev_stats_dump(struct vnic_dev *vdev, struct vnic_stats **stats);
+int vnic_dev_hang_notify(struct vnic_dev *vdev);
+void vnic_dev_packet_filter(struct vnic_dev *vdev, int directed, int multicast,
+ int broadcast, int promisc, int allmulti);
+void vnic_dev_add_addr(struct vnic_dev *vdev, u8 *addr);
+void vnic_dev_del_addr(struct vnic_dev *vdev, u8 *addr);
+int vnic_dev_mac_addr(struct vnic_dev *vdev, u8 *mac_addr);
+int vnic_dev_notify_set(struct vnic_dev *vdev, u16 intr);
+void vnic_dev_notify_unset(struct vnic_dev *vdev);
+int vnic_dev_link_status(struct vnic_dev *vdev);
+u32 vnic_dev_port_speed(struct vnic_dev *vdev);
+u32 vnic_dev_msg_lvl(struct vnic_dev *vdev);
+u32 vnic_dev_mtu(struct vnic_dev *vdev);
+u32 vnic_dev_link_down_cnt(struct vnic_dev *vdev);
+int vnic_dev_close(struct vnic_dev *vdev);
+int vnic_dev_enable(struct vnic_dev *vdev);
+int vnic_dev_disable(struct vnic_dev *vdev);
+int vnic_dev_open(struct vnic_dev *vdev, int arg);
+int vnic_dev_open_done(struct vnic_dev *vdev, int *done);
+int vnic_dev_init(struct vnic_dev *vdev, int arg);
+int vnic_dev_soft_reset(struct vnic_dev *vdev, int arg);
+int vnic_dev_soft_reset_done(struct vnic_dev *vdev, int *done);
+void vnic_dev_set_intr_mode(struct vnic_dev *vdev,
+ enum vnic_dev_intr_mode intr_mode);
+enum vnic_dev_intr_mode vnic_dev_get_intr_mode(struct vnic_dev *vdev);
+void vnic_dev_unregister(struct vnic_dev *vdev);
+struct vnic_dev *vnic_dev_register(struct vnic_dev *vdev,
+ void *priv, struct pci_dev *pdev,
+ struct vnic_dev_bar *bar);
+
+#endif /* _VNIC_DEV_H_ */
diff --git a/drivers/scsi/fnic/vnic_devcmd.h b/drivers/scsi/fnic/vnic_devcmd.h
new file mode 100644
index 00000000000..d62b9061bf1
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_devcmd.h
@@ -0,0 +1,281 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_DEVCMD_H_
+#define _VNIC_DEVCMD_H_
+
+#define _CMD_NBITS 14
+#define _CMD_VTYPEBITS 10
+#define _CMD_FLAGSBITS 6
+#define _CMD_DIRBITS 2
+
+#define _CMD_NMASK ((1 << _CMD_NBITS)-1)
+#define _CMD_VTYPEMASK ((1 << _CMD_VTYPEBITS)-1)
+#define _CMD_FLAGSMASK ((1 << _CMD_FLAGSBITS)-1)
+#define _CMD_DIRMASK ((1 << _CMD_DIRBITS)-1)
+
+#define _CMD_NSHIFT 0
+#define _CMD_VTYPESHIFT (_CMD_NSHIFT+_CMD_NBITS)
+#define _CMD_FLAGSSHIFT (_CMD_VTYPESHIFT+_CMD_VTYPEBITS)
+#define _CMD_DIRSHIFT (_CMD_FLAGSSHIFT+_CMD_FLAGSBITS)
+
+/*
+ * Direction bits (from host perspective).
+ */
+#define _CMD_DIR_NONE 0U
+#define _CMD_DIR_WRITE 1U
+#define _CMD_DIR_READ 2U
+#define _CMD_DIR_RW (_CMD_DIR_WRITE | _CMD_DIR_READ)
+
+/*
+ * Flag bits.
+ */
+#define _CMD_FLAGS_NONE 0U
+#define _CMD_FLAGS_NOWAIT 1U
+
+/*
+ * vNIC type bits.
+ */
+#define _CMD_VTYPE_NONE 0U
+#define _CMD_VTYPE_ENET 1U
+#define _CMD_VTYPE_FC 2U
+#define _CMD_VTYPE_SCSI 4U
+#define _CMD_VTYPE_ALL (_CMD_VTYPE_ENET | _CMD_VTYPE_FC | _CMD_VTYPE_SCSI)
+
+/*
+ * Used to create cmds..
+*/
+#define _CMDCF(dir, flags, vtype, nr) \
+ (((dir) << _CMD_DIRSHIFT) | \
+ ((flags) << _CMD_FLAGSSHIFT) | \
+ ((vtype) << _CMD_VTYPESHIFT) | \
+ ((nr) << _CMD_NSHIFT))
+#define _CMDC(dir, vtype, nr) _CMDCF(dir, 0, vtype, nr)
+#define _CMDCNW(dir, vtype, nr) _CMDCF(dir, _CMD_FLAGS_NOWAIT, vtype, nr)
+
+/*
+ * Used to decode cmds..
+*/
+#define _CMD_DIR(cmd) (((cmd) >> _CMD_DIRSHIFT) & _CMD_DIRMASK)
+#define _CMD_FLAGS(cmd) (((cmd) >> _CMD_FLAGSSHIFT) & _CMD_FLAGSMASK)
+#define _CMD_VTYPE(cmd) (((cmd) >> _CMD_VTYPESHIFT) & _CMD_VTYPEMASK)
+#define _CMD_N(cmd) (((cmd) >> _CMD_NSHIFT) & _CMD_NMASK)
+
+enum vnic_devcmd_cmd {
+ CMD_NONE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_NONE, 0),
+
+ /* mcpu fw info in mem: (u64)a0=paddr to struct vnic_devcmd_fw_info */
+ CMD_MCPU_FW_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 1),
+
+ /* dev-specific block member:
+ * in: (u16)a0=offset,(u8)a1=size
+ * out: a0=value */
+ CMD_DEV_SPEC = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 2),
+
+ /* stats clear */
+ CMD_STATS_CLEAR = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 3),
+
+ /* stats dump in mem: (u64)a0=paddr to stats area,
+ * (u16)a1=sizeof stats area */
+ CMD_STATS_DUMP = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 4),
+
+ /* set Rx packet filter: (u32)a0=filters (see CMD_PFILTER_*) */
+ CMD_PACKET_FILTER = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 7),
+
+ /* hang detection notification */
+ CMD_HANG_NOTIFY = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 8),
+
+ /* MAC address in (u48)a0 */
+ CMD_MAC_ADDR = _CMDC(_CMD_DIR_READ,
+ _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 9),
+
+ /* disable/enable promisc mode: (u8)a0=0/1 */
+/***** XXX DEPRECATED *****/
+ CMD_PROMISC_MODE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 10),
+
+ /* disable/enable all-multi mode: (u8)a0=0/1 */
+/***** XXX DEPRECATED *****/
+ CMD_ALLMULTI_MODE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 11),
+
+ /* add addr from (u48)a0 */
+ CMD_ADDR_ADD = _CMDCNW(_CMD_DIR_WRITE,
+ _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 12),
+
+ /* del addr from (u48)a0 */
+ CMD_ADDR_DEL = _CMDCNW(_CMD_DIR_WRITE,
+ _CMD_VTYPE_ENET | _CMD_VTYPE_FC, 13),
+
+ /* add VLAN id in (u16)a0 */
+ CMD_VLAN_ADD = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 14),
+
+ /* del VLAN id in (u16)a0 */
+ CMD_VLAN_DEL = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 15),
+
+ /* nic_cfg in (u32)a0 */
+ CMD_NIC_CFG = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 16),
+
+ /* union vnic_rss_key in mem: (u64)a0=paddr, (u16)a1=len */
+ CMD_RSS_KEY = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 17),
+
+ /* union vnic_rss_cpu in mem: (u64)a0=paddr, (u16)a1=len */
+ CMD_RSS_CPU = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 18),
+
+ /* initiate softreset */
+ CMD_SOFT_RESET = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 19),
+
+ /* softreset status:
+ * out: a0=0 reset complete, a0=1 reset in progress */
+ CMD_SOFT_RESET_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 20),
+
+ /* set struct vnic_devcmd_notify buffer in mem:
+ * in:
+ * (u64)a0=paddr to notify (set paddr=0 to unset)
+ * (u32)a1 & 0x00000000ffffffff=sizeof(struct vnic_devcmd_notify)
+ * (u16)a1 & 0x0000ffff00000000=intr num (-1 for no intr)
+ * out:
+ * (u32)a1 = effective size
+ */
+ CMD_NOTIFY = _CMDC(_CMD_DIR_RW, _CMD_VTYPE_ALL, 21),
+
+ /* UNDI API: (u64)a0=paddr to s_PXENV_UNDI_ struct,
+ * (u8)a1=PXENV_UNDI_xxx */
+ CMD_UNDI = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 22),
+
+ /* initiate open sequence (u32)a0=flags (see CMD_OPENF_*) */
+ CMD_OPEN = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 23),
+
+ /* open status:
+ * out: a0=0 open complete, a0=1 open in progress */
+ CMD_OPEN_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 24),
+
+ /* close vnic */
+ CMD_CLOSE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 25),
+
+ /* initialize virtual link: (u32)a0=flags (see CMD_INITF_*) */
+ CMD_INIT = _CMDCNW(_CMD_DIR_READ, _CMD_VTYPE_ALL, 26),
+
+ /* variant of CMD_INIT, with provisioning info
+ * (u64)a0=paddr of vnic_devcmd_provinfo
+ * (u32)a1=sizeof provision info */
+ CMD_INIT_PROV_INFO = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 27),
+
+ /* enable virtual link */
+ CMD_ENABLE = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 28),
+
+ /* disable virtual link */
+ CMD_DISABLE = _CMDC(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 29),
+
+ /* stats dump all vnics on uplink in mem: (u64)a0=paddr (u32)a1=uif */
+ CMD_STATS_DUMP_ALL = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_ALL, 30),
+
+ /* init status:
+ * out: a0=0 init complete, a0=1 init in progress
+ * if a0=0, a1=errno */
+ CMD_INIT_STATUS = _CMDC(_CMD_DIR_READ, _CMD_VTYPE_ALL, 31),
+
+ /* INT13 API: (u64)a0=paddr to vnic_int13_params struct
+ * (u8)a1=INT13_CMD_xxx */
+ CMD_INT13 = _CMDC(_CMD_DIR_WRITE, _CMD_VTYPE_FC, 32),
+
+ /* logical uplink enable/disable: (u64)a0: 0/1=disable/enable */
+ CMD_LOGICAL_UPLINK = _CMDCNW(_CMD_DIR_WRITE, _CMD_VTYPE_ENET, 33),
+
+ /* undo initialize of virtual link */
+ CMD_DEINIT = _CMDCNW(_CMD_DIR_NONE, _CMD_VTYPE_ALL, 34),
+};
+
+/* flags for CMD_OPEN */
+#define CMD_OPENF_OPROM 0x1 /* open coming from option rom */
+
+/* flags for CMD_INIT */
+#define CMD_INITF_DEFAULT_MAC 0x1 /* init with default mac addr */
+
+/* flags for CMD_PACKET_FILTER */
+#define CMD_PFILTER_DIRECTED 0x01
+#define CMD_PFILTER_MULTICAST 0x02
+#define CMD_PFILTER_BROADCAST 0x04
+#define CMD_PFILTER_PROMISCUOUS 0x08
+#define CMD_PFILTER_ALL_MULTICAST 0x10
+
+enum vnic_devcmd_status {
+ STAT_NONE = 0,
+ STAT_BUSY = 1 << 0, /* cmd in progress */
+ STAT_ERROR = 1 << 1, /* last cmd caused error (code in a0) */
+};
+
+enum vnic_devcmd_error {
+ ERR_SUCCESS = 0,
+ ERR_EINVAL = 1,
+ ERR_EFAULT = 2,
+ ERR_EPERM = 3,
+ ERR_EBUSY = 4,
+ ERR_ECMDUNKNOWN = 5,
+ ERR_EBADSTATE = 6,
+ ERR_ENOMEM = 7,
+ ERR_ETIMEDOUT = 8,
+ ERR_ELINKDOWN = 9,
+};
+
+struct vnic_devcmd_fw_info {
+ char fw_version[32];
+ char fw_build[32];
+ char hw_version[32];
+ char hw_serial_number[32];
+};
+
+struct vnic_devcmd_notify {
+ u32 csum; /* checksum over following words */
+
+ u32 link_state; /* link up == 1 */
+ u32 port_speed; /* effective port speed (rate limit) */
+ u32 mtu; /* MTU */
+ u32 msglvl; /* requested driver msg lvl */
+ u32 uif; /* uplink interface */
+ u32 status; /* status bits (see VNIC_STF_*) */
+ u32 error; /* error code (see ERR_*) for first ERR */
+ u32 link_down_cnt; /* running count of link down transitions */
+};
+#define VNIC_STF_FATAL_ERR 0x0001 /* fatal fw error */
+
+struct vnic_devcmd_provinfo {
+ u8 oui[3];
+ u8 type;
+ u8 data[0];
+};
+
+/*
+ * Writing cmd register causes STAT_BUSY to get set in status register.
+ * When cmd completes, STAT_BUSY will be cleared.
+ *
+ * If cmd completed successfully STAT_ERROR will be clear
+ * and args registers contain cmd-specific results.
+ *
+ * If cmd error, STAT_ERROR will be set and args[0] contains error code.
+ *
+ * status register is read-only. While STAT_BUSY is set,
+ * all other register contents are read-only.
+ */
+
+/* Make sizeof(vnic_devcmd) a power-of-2 for I/O BAR. */
+#define VNIC_DEVCMD_NARGS 15
+struct vnic_devcmd {
+ u32 status; /* RO */
+ u32 cmd; /* RW */
+ u64 args[VNIC_DEVCMD_NARGS]; /* RW cmd args (little-endian) */
+};
+
+#endif /* _VNIC_DEVCMD_H_ */
diff --git a/drivers/scsi/fnic/vnic_intr.c b/drivers/scsi/fnic/vnic_intr.c
new file mode 100644
index 00000000000..4f4dc8793d2
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_intr.c
@@ -0,0 +1,60 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/kernel.h>
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "vnic_dev.h"
+#include "vnic_intr.h"
+
+void vnic_intr_free(struct vnic_intr *intr)
+{
+ intr->ctrl = NULL;
+}
+
+int vnic_intr_alloc(struct vnic_dev *vdev, struct vnic_intr *intr,
+ unsigned int index)
+{
+ intr->index = index;
+ intr->vdev = vdev;
+
+ intr->ctrl = vnic_dev_get_res(vdev, RES_TYPE_INTR_CTRL, index);
+ if (!intr->ctrl) {
+ printk(KERN_ERR "Failed to hook INTR[%d].ctrl resource\n",
+ index);
+ return -EINVAL;
+ }
+
+ return 0;
+}
+
+void vnic_intr_init(struct vnic_intr *intr, unsigned int coalescing_timer,
+ unsigned int coalescing_type, unsigned int mask_on_assertion)
+{
+ iowrite32(coalescing_timer, &intr->ctrl->coalescing_timer);
+ iowrite32(coalescing_type, &intr->ctrl->coalescing_type);
+ iowrite32(mask_on_assertion, &intr->ctrl->mask_on_assertion);
+ iowrite32(0, &intr->ctrl->int_credits);
+}
+
+void vnic_intr_clean(struct vnic_intr *intr)
+{
+ iowrite32(0, &intr->ctrl->int_credits);
+}
diff --git a/drivers/scsi/fnic/vnic_intr.h b/drivers/scsi/fnic/vnic_intr.h
new file mode 100644
index 00000000000..d5fb40e7c98
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_intr.h
@@ -0,0 +1,118 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_INTR_H_
+#define _VNIC_INTR_H_
+
+#include <linux/pci.h>
+#include "vnic_dev.h"
+
+/*
+ * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth
+ * Driver) when both are built with CONFIG options =y
+ */
+#define vnic_intr_unmask fnic_intr_unmask
+#define vnic_intr_mask fnic_intr_mask
+#define vnic_intr_return_credits fnic_intr_return_credits
+#define vnic_intr_credits fnic_intr_credits
+#define vnic_intr_return_all_credits fnic_intr_return_all_credits
+#define vnic_intr_legacy_pba fnic_intr_legacy_pba
+#define vnic_intr_free fnic_intr_free
+#define vnic_intr_alloc fnic_intr_alloc
+#define vnic_intr_init fnic_intr_init
+#define vnic_intr_clean fnic_intr_clean
+
+#define VNIC_INTR_TIMER_MAX 0xffff
+
+#define VNIC_INTR_TIMER_TYPE_ABS 0
+#define VNIC_INTR_TIMER_TYPE_QUIET 1
+
+/* Interrupt control */
+struct vnic_intr_ctrl {
+ u32 coalescing_timer; /* 0x00 */
+ u32 pad0;
+ u32 coalescing_value; /* 0x08 */
+ u32 pad1;
+ u32 coalescing_type; /* 0x10 */
+ u32 pad2;
+ u32 mask_on_assertion; /* 0x18 */
+ u32 pad3;
+ u32 mask; /* 0x20 */
+ u32 pad4;
+ u32 int_credits; /* 0x28 */
+ u32 pad5;
+ u32 int_credit_return; /* 0x30 */
+ u32 pad6;
+};
+
+struct vnic_intr {
+ unsigned int index;
+ struct vnic_dev *vdev;
+ struct vnic_intr_ctrl __iomem *ctrl; /* memory-mapped */
+};
+
+static inline void vnic_intr_unmask(struct vnic_intr *intr)
+{
+ iowrite32(0, &intr->ctrl->mask);
+}
+
+static inline void vnic_intr_mask(struct vnic_intr *intr)
+{
+ iowrite32(1, &intr->ctrl->mask);
+}
+
+static inline void vnic_intr_return_credits(struct vnic_intr *intr,
+ unsigned int credits, int unmask, int reset_timer)
+{
+#define VNIC_INTR_UNMASK_SHIFT 16
+#define VNIC_INTR_RESET_TIMER_SHIFT 17
+
+ u32 int_credit_return = (credits & 0xffff) |
+ (unmask ? (1 << VNIC_INTR_UNMASK_SHIFT) : 0) |
+ (reset_timer ? (1 << VNIC_INTR_RESET_TIMER_SHIFT) : 0);
+
+ iowrite32(int_credit_return, &intr->ctrl->int_credit_return);
+}
+
+static inline unsigned int vnic_intr_credits(struct vnic_intr *intr)
+{
+ return ioread32(&intr->ctrl->int_credits);
+}
+
+static inline void vnic_intr_return_all_credits(struct vnic_intr *intr)
+{
+ unsigned int credits = vnic_intr_credits(intr);
+ int unmask = 1;
+ int reset_timer = 1;
+
+ vnic_intr_return_credits(intr, credits, unmask, reset_timer);
+}
+
+static inline u32 vnic_intr_legacy_pba(u32 __iomem *legacy_pba)
+{
+ /* read PBA without clearing */
+ return ioread32(legacy_pba);
+}
+
+void vnic_intr_free(struct vnic_intr *intr);
+int vnic_intr_alloc(struct vnic_dev *vdev, struct vnic_intr *intr,
+ unsigned int index);
+void vnic_intr_init(struct vnic_intr *intr, unsigned int coalescing_timer,
+ unsigned int coalescing_type, unsigned int mask_on_assertion);
+void vnic_intr_clean(struct vnic_intr *intr);
+
+#endif /* _VNIC_INTR_H_ */
diff --git a/drivers/scsi/fnic/vnic_nic.h b/drivers/scsi/fnic/vnic_nic.h
new file mode 100644
index 00000000000..f15b83eeace
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_nic.h
@@ -0,0 +1,69 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_NIC_H_
+#define _VNIC_NIC_H_
+
+/*
+ * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth
+ * Driver) when both are built with CONFIG options =y
+ */
+#define vnic_set_nic_cfg fnic_set_nic_cfg
+
+#define NIC_CFG_RSS_DEFAULT_CPU_MASK_FIELD 0xffUL
+#define NIC_CFG_RSS_DEFAULT_CPU_SHIFT 0
+#define NIC_CFG_RSS_HASH_TYPE (0xffUL << 8)
+#define NIC_CFG_RSS_HASH_TYPE_MASK_FIELD 0xffUL
+#define NIC_CFG_RSS_HASH_TYPE_SHIFT 8
+#define NIC_CFG_RSS_HASH_BITS (7UL << 16)
+#define NIC_CFG_RSS_HASH_BITS_MASK_FIELD 7UL
+#define NIC_CFG_RSS_HASH_BITS_SHIFT 16
+#define NIC_CFG_RSS_BASE_CPU (7UL << 19)
+#define NIC_CFG_RSS_BASE_CPU_MASK_FIELD 7UL
+#define NIC_CFG_RSS_BASE_CPU_SHIFT 19
+#define NIC_CFG_RSS_ENABLE (1UL << 22)
+#define NIC_CFG_RSS_ENABLE_MASK_FIELD 1UL
+#define NIC_CFG_RSS_ENABLE_SHIFT 22
+#define NIC_CFG_TSO_IPID_SPLIT_EN (1UL << 23)
+#define NIC_CFG_TSO_IPID_SPLIT_EN_MASK_FIELD 1UL
+#define NIC_CFG_TSO_IPID_SPLIT_EN_SHIFT 23
+#define NIC_CFG_IG_VLAN_STRIP_EN (1UL << 24)
+#define NIC_CFG_IG_VLAN_STRIP_EN_MASK_FIELD 1UL
+#define NIC_CFG_IG_VLAN_STRIP_EN_SHIFT 24
+
+static inline void vnic_set_nic_cfg(u32 *nic_cfg,
+ u8 rss_default_cpu, u8 rss_hash_type,
+ u8 rss_hash_bits, u8 rss_base_cpu,
+ u8 rss_enable, u8 tso_ipid_split_en,
+ u8 ig_vlan_strip_en)
+{
+ *nic_cfg = (rss_default_cpu & NIC_CFG_RSS_DEFAULT_CPU_MASK_FIELD) |
+ ((rss_hash_type & NIC_CFG_RSS_HASH_TYPE_MASK_FIELD)
+ << NIC_CFG_RSS_HASH_TYPE_SHIFT) |
+ ((rss_hash_bits & NIC_CFG_RSS_HASH_BITS_MASK_FIELD)
+ << NIC_CFG_RSS_HASH_BITS_SHIFT) |
+ ((rss_base_cpu & NIC_CFG_RSS_BASE_CPU_MASK_FIELD)
+ << NIC_CFG_RSS_BASE_CPU_SHIFT) |
+ ((rss_enable & NIC_CFG_RSS_ENABLE_MASK_FIELD)
+ << NIC_CFG_RSS_ENABLE_SHIFT) |
+ ((tso_ipid_split_en & NIC_CFG_TSO_IPID_SPLIT_EN_MASK_FIELD)
+ << NIC_CFG_TSO_IPID_SPLIT_EN_SHIFT) |
+ ((ig_vlan_strip_en & NIC_CFG_IG_VLAN_STRIP_EN_MASK_FIELD)
+ << NIC_CFG_IG_VLAN_STRIP_EN_SHIFT);
+}
+
+#endif /* _VNIC_NIC_H_ */
diff --git a/drivers/scsi/fnic/vnic_resource.h b/drivers/scsi/fnic/vnic_resource.h
new file mode 100644
index 00000000000..2d842f79d41
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_resource.h
@@ -0,0 +1,61 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_RESOURCE_H_
+#define _VNIC_RESOURCE_H_
+
+#define VNIC_RES_MAGIC 0x766E6963L /* 'vnic' */
+#define VNIC_RES_VERSION 0x00000000L
+
+/* vNIC resource types */
+enum vnic_res_type {
+ RES_TYPE_EOL, /* End-of-list */
+ RES_TYPE_WQ, /* Work queues */
+ RES_TYPE_RQ, /* Receive queues */
+ RES_TYPE_CQ, /* Completion queues */
+ RES_TYPE_RSVD1,
+ RES_TYPE_NIC_CFG, /* Enet NIC config registers */
+ RES_TYPE_RSVD2,
+ RES_TYPE_RSVD3,
+ RES_TYPE_RSVD4,
+ RES_TYPE_RSVD5,
+ RES_TYPE_INTR_CTRL, /* Interrupt ctrl table */
+ RES_TYPE_INTR_TABLE, /* MSI/MSI-X Interrupt table */
+ RES_TYPE_INTR_PBA, /* MSI/MSI-X PBA table */
+ RES_TYPE_INTR_PBA_LEGACY, /* Legacy intr status */
+ RES_TYPE_RSVD6,
+ RES_TYPE_RSVD7,
+ RES_TYPE_DEVCMD, /* Device command region */
+ RES_TYPE_PASS_THRU_PAGE, /* Pass-thru page */
+
+ RES_TYPE_MAX, /* Count of resource types */
+};
+
+struct vnic_resource_header {
+ u32 magic;
+ u32 version;
+};
+
+struct vnic_resource {
+ u8 type;
+ u8 bar;
+ u8 pad[2];
+ u32 bar_offset;
+ u32 count;
+};
+
+#endif /* _VNIC_RESOURCE_H_ */
diff --git a/drivers/scsi/fnic/vnic_rq.c b/drivers/scsi/fnic/vnic_rq.c
new file mode 100644
index 00000000000..bedd0d28563
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_rq.c
@@ -0,0 +1,196 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "vnic_dev.h"
+#include "vnic_rq.h"
+
+static int vnic_rq_alloc_bufs(struct vnic_rq *rq)
+{
+ struct vnic_rq_buf *buf;
+ struct vnic_dev *vdev;
+ unsigned int i, j, count = rq->ring.desc_count;
+ unsigned int blks = VNIC_RQ_BUF_BLKS_NEEDED(count);
+
+ vdev = rq->vdev;
+
+ for (i = 0; i < blks; i++) {
+ rq->bufs[i] = kzalloc(VNIC_RQ_BUF_BLK_SZ, GFP_ATOMIC);
+ if (!rq->bufs[i]) {
+ printk(KERN_ERR "Failed to alloc rq_bufs\n");
+ return -ENOMEM;
+ }
+ }
+
+ for (i = 0; i < blks; i++) {
+ buf = rq->bufs[i];
+ for (j = 0; j < VNIC_RQ_BUF_BLK_ENTRIES; j++) {
+ buf->index = i * VNIC_RQ_BUF_BLK_ENTRIES + j;
+ buf->desc = (u8 *)rq->ring.descs +
+ rq->ring.desc_size * buf->index;
+ if (buf->index + 1 == count) {
+ buf->next = rq->bufs[0];
+ break;
+ } else if (j + 1 == VNIC_RQ_BUF_BLK_ENTRIES) {
+ buf->next = rq->bufs[i + 1];
+ } else {
+ buf->next = buf + 1;
+ buf++;
+ }
+ }
+ }
+
+ rq->to_use = rq->to_clean = rq->bufs[0];
+ rq->buf_index = 0;
+
+ return 0;
+}
+
+void vnic_rq_free(struct vnic_rq *rq)
+{
+ struct vnic_dev *vdev;
+ unsigned int i;
+
+ vdev = rq->vdev;
+
+ vnic_dev_free_desc_ring(vdev, &rq->ring);
+
+ for (i = 0; i < VNIC_RQ_BUF_BLKS_MAX; i++) {
+ kfree(rq->bufs[i]);
+ rq->bufs[i] = NULL;
+ }
+
+ rq->ctrl = NULL;
+}
+
+int vnic_rq_alloc(struct vnic_dev *vdev, struct vnic_rq *rq, unsigned int index,
+ unsigned int desc_count, unsigned int desc_size)
+{
+ int err;
+
+ rq->index = index;
+ rq->vdev = vdev;
+
+ rq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_RQ, index);
+ if (!rq->ctrl) {
+ printk(KERN_ERR "Failed to hook RQ[%d] resource\n", index);
+ return -EINVAL;
+ }
+
+ vnic_rq_disable(rq);
+
+ err = vnic_dev_alloc_desc_ring(vdev, &rq->ring, desc_count, desc_size);
+ if (err)
+ return err;
+
+ err = vnic_rq_alloc_bufs(rq);
+ if (err) {
+ vnic_rq_free(rq);
+ return err;
+ }
+
+ return 0;
+}
+
+void vnic_rq_init(struct vnic_rq *rq, unsigned int cq_index,
+ unsigned int error_interrupt_enable,
+ unsigned int error_interrupt_offset)
+{
+ u64 paddr;
+ u32 fetch_index;
+
+ paddr = (u64)rq->ring.base_addr | VNIC_PADDR_TARGET;
+ writeq(paddr, &rq->ctrl->ring_base);
+ iowrite32(rq->ring.desc_count, &rq->ctrl->ring_size);
+ iowrite32(cq_index, &rq->ctrl->cq_index);
+ iowrite32(error_interrupt_enable, &rq->ctrl->error_interrupt_enable);
+ iowrite32(error_interrupt_offset, &rq->ctrl->error_interrupt_offset);
+ iowrite32(0, &rq->ctrl->dropped_packet_count);
+ iowrite32(0, &rq->ctrl->error_status);
+
+ /* Use current fetch_index as the ring starting point */
+ fetch_index = ioread32(&rq->ctrl->fetch_index);
+ rq->to_use = rq->to_clean =
+ &rq->bufs[fetch_index / VNIC_RQ_BUF_BLK_ENTRIES]
+ [fetch_index % VNIC_RQ_BUF_BLK_ENTRIES];
+ iowrite32(fetch_index, &rq->ctrl->posted_index);
+
+ rq->buf_index = 0;
+}
+
+unsigned int vnic_rq_error_status(struct vnic_rq *rq)
+{
+ return ioread32(&rq->ctrl->error_status);
+}
+
+void vnic_rq_enable(struct vnic_rq *rq)
+{
+ iowrite32(1, &rq->ctrl->enable);
+}
+
+int vnic_rq_disable(struct vnic_rq *rq)
+{
+ unsigned int wait;
+
+ iowrite32(0, &rq->ctrl->enable);
+
+ /* Wait for HW to ACK disable request */
+ for (wait = 0; wait < 100; wait++) {
+ if (!(ioread32(&rq->ctrl->running)))
+ return 0;
+ udelay(1);
+ }
+
+ printk(KERN_ERR "Failed to disable RQ[%d]\n", rq->index);
+
+ return -ETIMEDOUT;
+}
+
+void vnic_rq_clean(struct vnic_rq *rq,
+ void (*buf_clean)(struct vnic_rq *rq, struct vnic_rq_buf *buf))
+{
+ struct vnic_rq_buf *buf;
+ u32 fetch_index;
+
+ BUG_ON(ioread32(&rq->ctrl->enable));
+
+ buf = rq->to_clean;
+
+ while (vnic_rq_desc_used(rq) > 0) {
+
+ (*buf_clean)(rq, buf);
+
+ buf = rq->to_clean = buf->next;
+ rq->ring.desc_avail++;
+ }
+
+ /* Use current fetch_index as the ring starting point */
+ fetch_index = ioread32(&rq->ctrl->fetch_index);
+ rq->to_use = rq->to_clean =
+ &rq->bufs[fetch_index / VNIC_RQ_BUF_BLK_ENTRIES]
+ [fetch_index % VNIC_RQ_BUF_BLK_ENTRIES];
+ iowrite32(fetch_index, &rq->ctrl->posted_index);
+
+ rq->buf_index = 0;
+
+ vnic_dev_clear_desc_ring(&rq->ring);
+}
+
diff --git a/drivers/scsi/fnic/vnic_rq.h b/drivers/scsi/fnic/vnic_rq.h
new file mode 100644
index 00000000000..aebdfbd6ad3
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_rq.h
@@ -0,0 +1,235 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_RQ_H_
+#define _VNIC_RQ_H_
+
+#include <linux/pci.h>
+#include "vnic_dev.h"
+#include "vnic_cq.h"
+
+/*
+ * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth
+ * Driver) when both are built with CONFIG options =y
+ */
+#define vnic_rq_desc_avail fnic_rq_desc_avail
+#define vnic_rq_desc_used fnic_rq_desc_used
+#define vnic_rq_next_desc fnic_rq_next_desc
+#define vnic_rq_next_index fnic_rq_next_index
+#define vnic_rq_next_buf_index fnic_rq_next_buf_index
+#define vnic_rq_post fnic_rq_post
+#define vnic_rq_posting_soon fnic_rq_posting_soon
+#define vnic_rq_return_descs fnic_rq_return_descs
+#define vnic_rq_service fnic_rq_service
+#define vnic_rq_fill fnic_rq_fill
+#define vnic_rq_free fnic_rq_free
+#define vnic_rq_alloc fnic_rq_alloc
+#define vnic_rq_init fnic_rq_init
+#define vnic_rq_error_status fnic_rq_error_status
+#define vnic_rq_enable fnic_rq_enable
+#define vnic_rq_disable fnic_rq_disable
+#define vnic_rq_clean fnic_rq_clean
+
+/* Receive queue control */
+struct vnic_rq_ctrl {
+ u64 ring_base; /* 0x00 */
+ u32 ring_size; /* 0x08 */
+ u32 pad0;
+ u32 posted_index; /* 0x10 */
+ u32 pad1;
+ u32 cq_index; /* 0x18 */
+ u32 pad2;
+ u32 enable; /* 0x20 */
+ u32 pad3;
+ u32 running; /* 0x28 */
+ u32 pad4;
+ u32 fetch_index; /* 0x30 */
+ u32 pad5;
+ u32 error_interrupt_enable; /* 0x38 */
+ u32 pad6;
+ u32 error_interrupt_offset; /* 0x40 */
+ u32 pad7;
+ u32 error_status; /* 0x48 */
+ u32 pad8;
+ u32 dropped_packet_count; /* 0x50 */
+ u32 pad9;
+ u32 dropped_packet_count_rc; /* 0x58 */
+ u32 pad10;
+};
+
+/* Break the vnic_rq_buf allocations into blocks of 64 entries */
+#define VNIC_RQ_BUF_BLK_ENTRIES 64
+#define VNIC_RQ_BUF_BLK_SZ \
+ (VNIC_RQ_BUF_BLK_ENTRIES * sizeof(struct vnic_rq_buf))
+#define VNIC_RQ_BUF_BLKS_NEEDED(entries) \
+ DIV_ROUND_UP(entries, VNIC_RQ_BUF_BLK_ENTRIES)
+#define VNIC_RQ_BUF_BLKS_MAX VNIC_RQ_BUF_BLKS_NEEDED(4096)
+
+struct vnic_rq_buf {
+ struct vnic_rq_buf *next;
+ dma_addr_t dma_addr;
+ void *os_buf;
+ unsigned int os_buf_index;
+ unsigned int len;
+ unsigned int index;
+ void *desc;
+};
+
+struct vnic_rq {
+ unsigned int index;
+ struct vnic_dev *vdev;
+ struct vnic_rq_ctrl __iomem *ctrl; /* memory-mapped */
+ struct vnic_dev_ring ring;
+ struct vnic_rq_buf *bufs[VNIC_RQ_BUF_BLKS_MAX];
+ struct vnic_rq_buf *to_use;
+ struct vnic_rq_buf *to_clean;
+ void *os_buf_head;
+ unsigned int buf_index;
+ unsigned int pkts_outstanding;
+};
+
+static inline unsigned int vnic_rq_desc_avail(struct vnic_rq *rq)
+{
+ /* how many does SW own? */
+ return rq->ring.desc_avail;
+}
+
+static inline unsigned int vnic_rq_desc_used(struct vnic_rq *rq)
+{
+ /* how many does HW own? */
+ return rq->ring.desc_count - rq->ring.desc_avail - 1;
+}
+
+static inline void *vnic_rq_next_desc(struct vnic_rq *rq)
+{
+ return rq->to_use->desc;
+}
+
+static inline unsigned int vnic_rq_next_index(struct vnic_rq *rq)
+{
+ return rq->to_use->index;
+}
+
+static inline unsigned int vnic_rq_next_buf_index(struct vnic_rq *rq)
+{
+ return rq->buf_index++;
+}
+
+static inline void vnic_rq_post(struct vnic_rq *rq,
+ void *os_buf, unsigned int os_buf_index,
+ dma_addr_t dma_addr, unsigned int len)
+{
+ struct vnic_rq_buf *buf = rq->to_use;
+
+ buf->os_buf = os_buf;
+ buf->os_buf_index = os_buf_index;
+ buf->dma_addr = dma_addr;
+ buf->len = len;
+
+ buf = buf->next;
+ rq->to_use = buf;
+ rq->ring.desc_avail--;
+
+ /* Move the posted_index every nth descriptor
+ */
+
+#ifndef VNIC_RQ_RETURN_RATE
+#define VNIC_RQ_RETURN_RATE 0xf /* keep 2^n - 1 */
+#endif
+
+ if ((buf->index & VNIC_RQ_RETURN_RATE) == 0) {
+ /* Adding write memory barrier prevents compiler and/or CPU
+ * reordering, thus avoiding descriptor posting before
+ * descriptor is initialized. Otherwise, hardware can read
+ * stale descriptor fields.
+ */
+ wmb();
+ iowrite32(buf->index, &rq->ctrl->posted_index);
+ }
+}
+
+static inline int vnic_rq_posting_soon(struct vnic_rq *rq)
+{
+ return (rq->to_use->index & VNIC_RQ_RETURN_RATE) == 0;
+}
+
+static inline void vnic_rq_return_descs(struct vnic_rq *rq, unsigned int count)
+{
+ rq->ring.desc_avail += count;
+}
+
+enum desc_return_options {
+ VNIC_RQ_RETURN_DESC,
+ VNIC_RQ_DEFER_RETURN_DESC,
+};
+
+static inline void vnic_rq_service(struct vnic_rq *rq,
+ struct cq_desc *cq_desc, u16 completed_index,
+ int desc_return, void (*buf_service)(struct vnic_rq *rq,
+ struct cq_desc *cq_desc, struct vnic_rq_buf *buf,
+ int skipped, void *opaque), void *opaque)
+{
+ struct vnic_rq_buf *buf;
+ int skipped;
+
+ buf = rq->to_clean;
+ while (1) {
+
+ skipped = (buf->index != completed_index);
+
+ (*buf_service)(rq, cq_desc, buf, skipped, opaque);
+
+ if (desc_return == VNIC_RQ_RETURN_DESC)
+ rq->ring.desc_avail++;
+
+ rq->to_clean = buf->next;
+
+ if (!skipped)
+ break;
+
+ buf = rq->to_clean;
+ }
+}
+
+static inline int vnic_rq_fill(struct vnic_rq *rq,
+ int (*buf_fill)(struct vnic_rq *rq))
+{
+ int err;
+
+ while (vnic_rq_desc_avail(rq) > 1) {
+
+ err = (*buf_fill)(rq);
+ if (err)
+ return err;
+ }
+
+ return 0;
+}
+
+void vnic_rq_free(struct vnic_rq *rq);
+int vnic_rq_alloc(struct vnic_dev *vdev, struct vnic_rq *rq, unsigned int index,
+ unsigned int desc_count, unsigned int desc_size);
+void vnic_rq_init(struct vnic_rq *rq, unsigned int cq_index,
+ unsigned int error_interrupt_enable,
+ unsigned int error_interrupt_offset);
+unsigned int vnic_rq_error_status(struct vnic_rq *rq);
+void vnic_rq_enable(struct vnic_rq *rq);
+int vnic_rq_disable(struct vnic_rq *rq);
+void vnic_rq_clean(struct vnic_rq *rq,
+ void (*buf_clean)(struct vnic_rq *rq, struct vnic_rq_buf *buf));
+
+#endif /* _VNIC_RQ_H_ */
diff --git a/drivers/scsi/fnic/vnic_scsi.h b/drivers/scsi/fnic/vnic_scsi.h
new file mode 100644
index 00000000000..46baa525400
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_scsi.h
@@ -0,0 +1,99 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_SCSI_H_
+#define _VNIC_SCSI_H_
+
+#define VNIC_FNIC_WQ_COPY_COUNT_MIN 1
+#define VNIC_FNIC_WQ_COPY_COUNT_MAX 1
+
+#define VNIC_FNIC_WQ_DESCS_MIN 64
+#define VNIC_FNIC_WQ_DESCS_MAX 128
+
+#define VNIC_FNIC_WQ_COPY_DESCS_MIN 64
+#define VNIC_FNIC_WQ_COPY_DESCS_MAX 512
+
+#define VNIC_FNIC_RQ_DESCS_MIN 64
+#define VNIC_FNIC_RQ_DESCS_MAX 128
+
+#define VNIC_FNIC_EDTOV_MIN 1000
+#define VNIC_FNIC_EDTOV_MAX 255000
+#define VNIC_FNIC_EDTOV_DEF 2000
+
+#define VNIC_FNIC_RATOV_MIN 1000
+#define VNIC_FNIC_RATOV_MAX 255000
+
+#define VNIC_FNIC_MAXDATAFIELDSIZE_MIN 256
+#define VNIC_FNIC_MAXDATAFIELDSIZE_MAX 2112
+
+#define VNIC_FNIC_FLOGI_RETRIES_MIN 0
+#define VNIC_FNIC_FLOGI_RETRIES_MAX 0xffffffff
+#define VNIC_FNIC_FLOGI_RETRIES_DEF 0xffffffff
+
+#define VNIC_FNIC_FLOGI_TIMEOUT_MIN 1000
+#define VNIC_FNIC_FLOGI_TIMEOUT_MAX 255000
+
+#define VNIC_FNIC_PLOGI_RETRIES_MIN 0
+#define VNIC_FNIC_PLOGI_RETRIES_MAX 255
+#define VNIC_FNIC_PLOGI_RETRIES_DEF 8
+
+#define VNIC_FNIC_PLOGI_TIMEOUT_MIN 1000
+#define VNIC_FNIC_PLOGI_TIMEOUT_MAX 255000
+
+#define VNIC_FNIC_IO_THROTTLE_COUNT_MIN 256
+#define VNIC_FNIC_IO_THROTTLE_COUNT_MAX 4096
+
+#define VNIC_FNIC_LINK_DOWN_TIMEOUT_MIN 0
+#define VNIC_FNIC_LINK_DOWN_TIMEOUT_MAX 240000
+
+#define VNIC_FNIC_PORT_DOWN_TIMEOUT_MIN 0
+#define VNIC_FNIC_PORT_DOWN_TIMEOUT_MAX 240000
+
+#define VNIC_FNIC_PORT_DOWN_IO_RETRIES_MIN 0
+#define VNIC_FNIC_PORT_DOWN_IO_RETRIES_MAX 255
+
+#define VNIC_FNIC_LUNS_PER_TARGET_MIN 1
+#define VNIC_FNIC_LUNS_PER_TARGET_MAX 1024
+
+/* Device-specific region: scsi configuration */
+struct vnic_fc_config {
+ u64 node_wwn;
+ u64 port_wwn;
+ u32 flags;
+ u32 wq_enet_desc_count;
+ u32 wq_copy_desc_count;
+ u32 rq_desc_count;
+ u32 flogi_retries;
+ u32 flogi_timeout;
+ u32 plogi_retries;
+ u32 plogi_timeout;
+ u32 io_throttle_count;
+ u32 link_down_timeout;
+ u32 port_down_timeout;
+ u32 port_down_io_retries;
+ u32 luns_per_tgt;
+ u16 maxdatafieldsize;
+ u16 ed_tov;
+ u16 ra_tov;
+ u16 intr_timer;
+ u8 intr_timer_type;
+};
+
+#define VFCF_FCP_SEQ_LVL_ERR 0x1 /* Enable FCP-2 Error Recovery */
+#define VFCF_PERBI 0x2 /* persistent binding info available */
+
+#endif /* _VNIC_SCSI_H_ */
diff --git a/drivers/scsi/fnic/vnic_stats.h b/drivers/scsi/fnic/vnic_stats.h
new file mode 100644
index 00000000000..5372e23c1cb
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_stats.h
@@ -0,0 +1,68 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_STATS_H_
+#define _VNIC_STATS_H_
+
+/* Tx statistics */
+struct vnic_tx_stats {
+ u64 tx_frames_ok;
+ u64 tx_unicast_frames_ok;
+ u64 tx_multicast_frames_ok;
+ u64 tx_broadcast_frames_ok;
+ u64 tx_bytes_ok;
+ u64 tx_unicast_bytes_ok;
+ u64 tx_multicast_bytes_ok;
+ u64 tx_broadcast_bytes_ok;
+ u64 tx_drops;
+ u64 tx_errors;
+ u64 tx_tso;
+ u64 rsvd[16];
+};
+
+/* Rx statistics */
+struct vnic_rx_stats {
+ u64 rx_frames_ok;
+ u64 rx_frames_total;
+ u64 rx_unicast_frames_ok;
+ u64 rx_multicast_frames_ok;
+ u64 rx_broadcast_frames_ok;
+ u64 rx_bytes_ok;
+ u64 rx_unicast_bytes_ok;
+ u64 rx_multicast_bytes_ok;
+ u64 rx_broadcast_bytes_ok;
+ u64 rx_drop;
+ u64 rx_no_bufs;
+ u64 rx_errors;
+ u64 rx_rss;
+ u64 rx_crc_errors;
+ u64 rx_frames_64;
+ u64 rx_frames_127;
+ u64 rx_frames_255;
+ u64 rx_frames_511;
+ u64 rx_frames_1023;
+ u64 rx_frames_1518;
+ u64 rx_frames_to_max;
+ u64 rsvd[16];
+};
+
+struct vnic_stats {
+ struct vnic_tx_stats tx;
+ struct vnic_rx_stats rx;
+};
+
+#endif /* _VNIC_STATS_H_ */
diff --git a/drivers/scsi/fnic/vnic_wq.c b/drivers/scsi/fnic/vnic_wq.c
new file mode 100644
index 00000000000..1f9ea790d13
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_wq.c
@@ -0,0 +1,182 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "vnic_dev.h"
+#include "vnic_wq.h"
+
+static int vnic_wq_alloc_bufs(struct vnic_wq *wq)
+{
+ struct vnic_wq_buf *buf;
+ struct vnic_dev *vdev;
+ unsigned int i, j, count = wq->ring.desc_count;
+ unsigned int blks = VNIC_WQ_BUF_BLKS_NEEDED(count);
+
+ vdev = wq->vdev;
+
+ for (i = 0; i < blks; i++) {
+ wq->bufs[i] = kzalloc(VNIC_WQ_BUF_BLK_SZ, GFP_ATOMIC);
+ if (!wq->bufs[i]) {
+ printk(KERN_ERR "Failed to alloc wq_bufs\n");
+ return -ENOMEM;
+ }
+ }
+
+ for (i = 0; i < blks; i++) {
+ buf = wq->bufs[i];
+ for (j = 0; j < VNIC_WQ_BUF_BLK_ENTRIES; j++) {
+ buf->index = i * VNIC_WQ_BUF_BLK_ENTRIES + j;
+ buf->desc = (u8 *)wq->ring.descs +
+ wq->ring.desc_size * buf->index;
+ if (buf->index + 1 == count) {
+ buf->next = wq->bufs[0];
+ break;
+ } else if (j + 1 == VNIC_WQ_BUF_BLK_ENTRIES) {
+ buf->next = wq->bufs[i + 1];
+ } else {
+ buf->next = buf + 1;
+ buf++;
+ }
+ }
+ }
+
+ wq->to_use = wq->to_clean = wq->bufs[0];
+
+ return 0;
+}
+
+void vnic_wq_free(struct vnic_wq *wq)
+{
+ struct vnic_dev *vdev;
+ unsigned int i;
+
+ vdev = wq->vdev;
+
+ vnic_dev_free_desc_ring(vdev, &wq->ring);
+
+ for (i = 0; i < VNIC_WQ_BUF_BLKS_MAX; i++) {
+ kfree(wq->bufs[i]);
+ wq->bufs[i] = NULL;
+ }
+
+ wq->ctrl = NULL;
+
+}
+
+int vnic_wq_alloc(struct vnic_dev *vdev, struct vnic_wq *wq, unsigned int index,
+ unsigned int desc_count, unsigned int desc_size)
+{
+ int err;
+
+ wq->index = index;
+ wq->vdev = vdev;
+
+ wq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_WQ, index);
+ if (!wq->ctrl) {
+ printk(KERN_ERR "Failed to hook WQ[%d] resource\n", index);
+ return -EINVAL;
+ }
+
+ vnic_wq_disable(wq);
+
+ err = vnic_dev_alloc_desc_ring(vdev, &wq->ring, desc_count, desc_size);
+ if (err)
+ return err;
+
+ err = vnic_wq_alloc_bufs(wq);
+ if (err) {
+ vnic_wq_free(wq);
+ return err;
+ }
+
+ return 0;
+}
+
+void vnic_wq_init(struct vnic_wq *wq, unsigned int cq_index,
+ unsigned int error_interrupt_enable,
+ unsigned int error_interrupt_offset)
+{
+ u64 paddr;
+
+ paddr = (u64)wq->ring.base_addr | VNIC_PADDR_TARGET;
+ writeq(paddr, &wq->ctrl->ring_base);
+ iowrite32(wq->ring.desc_count, &wq->ctrl->ring_size);
+ iowrite32(0, &wq->ctrl->fetch_index);
+ iowrite32(0, &wq->ctrl->posted_index);
+ iowrite32(cq_index, &wq->ctrl->cq_index);
+ iowrite32(error_interrupt_enable, &wq->ctrl->error_interrupt_enable);
+ iowrite32(error_interrupt_offset, &wq->ctrl->error_interrupt_offset);
+ iowrite32(0, &wq->ctrl->error_status);
+}
+
+unsigned int vnic_wq_error_status(struct vnic_wq *wq)
+{
+ return ioread32(&wq->ctrl->error_status);
+}
+
+void vnic_wq_enable(struct vnic_wq *wq)
+{
+ iowrite32(1, &wq->ctrl->enable);
+}
+
+int vnic_wq_disable(struct vnic_wq *wq)
+{
+ unsigned int wait;
+
+ iowrite32(0, &wq->ctrl->enable);
+
+ /* Wait for HW to ACK disable request */
+ for (wait = 0; wait < 100; wait++) {
+ if (!(ioread32(&wq->ctrl->running)))
+ return 0;
+ udelay(1);
+ }
+
+ printk(KERN_ERR "Failed to disable WQ[%d]\n", wq->index);
+
+ return -ETIMEDOUT;
+}
+
+void vnic_wq_clean(struct vnic_wq *wq,
+ void (*buf_clean)(struct vnic_wq *wq, struct vnic_wq_buf *buf))
+{
+ struct vnic_wq_buf *buf;
+
+ BUG_ON(ioread32(&wq->ctrl->enable));
+
+ buf = wq->to_clean;
+
+ while (vnic_wq_desc_used(wq) > 0) {
+
+ (*buf_clean)(wq, buf);
+
+ buf = wq->to_clean = buf->next;
+ wq->ring.desc_avail++;
+ }
+
+ wq->to_use = wq->to_clean = wq->bufs[0];
+
+ iowrite32(0, &wq->ctrl->fetch_index);
+ iowrite32(0, &wq->ctrl->posted_index);
+ iowrite32(0, &wq->ctrl->error_status);
+
+ vnic_dev_clear_desc_ring(&wq->ring);
+}
diff --git a/drivers/scsi/fnic/vnic_wq.h b/drivers/scsi/fnic/vnic_wq.h
new file mode 100644
index 00000000000..5cd094f7928
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_wq.h
@@ -0,0 +1,175 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_WQ_H_
+#define _VNIC_WQ_H_
+
+#include <linux/pci.h>
+#include "vnic_dev.h"
+#include "vnic_cq.h"
+
+/*
+ * These defines avoid symbol clash between fnic and enic (Cisco 10G Eth
+ * Driver) when both are built with CONFIG options =y
+ */
+#define vnic_wq_desc_avail fnic_wq_desc_avail
+#define vnic_wq_desc_used fnic_wq_desc_used
+#define vnic_wq_next_desc fni_cwq_next_desc
+#define vnic_wq_post fnic_wq_post
+#define vnic_wq_service fnic_wq_service
+#define vnic_wq_free fnic_wq_free
+#define vnic_wq_alloc fnic_wq_alloc
+#define vnic_wq_init fnic_wq_init
+#define vnic_wq_error_status fnic_wq_error_status
+#define vnic_wq_enable fnic_wq_enable
+#define vnic_wq_disable fnic_wq_disable
+#define vnic_wq_clean fnic_wq_clean
+
+/* Work queue control */
+struct vnic_wq_ctrl {
+ u64 ring_base; /* 0x00 */
+ u32 ring_size; /* 0x08 */
+ u32 pad0;
+ u32 posted_index; /* 0x10 */
+ u32 pad1;
+ u32 cq_index; /* 0x18 */
+ u32 pad2;
+ u32 enable; /* 0x20 */
+ u32 pad3;
+ u32 running; /* 0x28 */
+ u32 pad4;
+ u32 fetch_index; /* 0x30 */
+ u32 pad5;
+ u32 dca_value; /* 0x38 */
+ u32 pad6;
+ u32 error_interrupt_enable; /* 0x40 */
+ u32 pad7;
+ u32 error_interrupt_offset; /* 0x48 */
+ u32 pad8;
+ u32 error_status; /* 0x50 */
+ u32 pad9;
+};
+
+struct vnic_wq_buf {
+ struct vnic_wq_buf *next;
+ dma_addr_t dma_addr;
+ void *os_buf;
+ unsigned int len;
+ unsigned int index;
+ int sop;
+ void *desc;
+};
+
+/* Break the vnic_wq_buf allocations into blocks of 64 entries */
+#define VNIC_WQ_BUF_BLK_ENTRIES 64
+#define VNIC_WQ_BUF_BLK_SZ \
+ (VNIC_WQ_BUF_BLK_ENTRIES * sizeof(struct vnic_wq_buf))
+#define VNIC_WQ_BUF_BLKS_NEEDED(entries) \
+ DIV_ROUND_UP(entries, VNIC_WQ_BUF_BLK_ENTRIES)
+#define VNIC_WQ_BUF_BLKS_MAX VNIC_WQ_BUF_BLKS_NEEDED(4096)
+
+struct vnic_wq {
+ unsigned int index;
+ struct vnic_dev *vdev;
+ struct vnic_wq_ctrl __iomem *ctrl; /* memory-mapped */
+ struct vnic_dev_ring ring;
+ struct vnic_wq_buf *bufs[VNIC_WQ_BUF_BLKS_MAX];
+ struct vnic_wq_buf *to_use;
+ struct vnic_wq_buf *to_clean;
+ unsigned int pkts_outstanding;
+};
+
+static inline unsigned int vnic_wq_desc_avail(struct vnic_wq *wq)
+{
+ /* how many does SW own? */
+ return wq->ring.desc_avail;
+}
+
+static inline unsigned int vnic_wq_desc_used(struct vnic_wq *wq)
+{
+ /* how many does HW own? */
+ return wq->ring.desc_count - wq->ring.desc_avail - 1;
+}
+
+static inline void *vnic_wq_next_desc(struct vnic_wq *wq)
+{
+ return wq->to_use->desc;
+}
+
+static inline void vnic_wq_post(struct vnic_wq *wq,
+ void *os_buf, dma_addr_t dma_addr,
+ unsigned int len, int sop, int eop)
+{
+ struct vnic_wq_buf *buf = wq->to_use;
+
+ buf->sop = sop;
+ buf->os_buf = eop ? os_buf : NULL;
+ buf->dma_addr = dma_addr;
+ buf->len = len;
+
+ buf = buf->next;
+ if (eop) {
+ /* Adding write memory barrier prevents compiler and/or CPU
+ * reordering, thus avoiding descriptor posting before
+ * descriptor is initialized. Otherwise, hardware can read
+ * stale descriptor fields.
+ */
+ wmb();
+ iowrite32(buf->index, &wq->ctrl->posted_index);
+ }
+ wq->to_use = buf;
+
+ wq->ring.desc_avail--;
+}
+
+static inline void vnic_wq_service(struct vnic_wq *wq,
+ struct cq_desc *cq_desc, u16 completed_index,
+ void (*buf_service)(struct vnic_wq *wq,
+ struct cq_desc *cq_desc, struct vnic_wq_buf *buf, void *opaque),
+ void *opaque)
+{
+ struct vnic_wq_buf *buf;
+
+ buf = wq->to_clean;
+ while (1) {
+
+ (*buf_service)(wq, cq_desc, buf, opaque);
+
+ wq->ring.desc_avail++;
+
+ wq->to_clean = buf->next;
+
+ if (buf->index == completed_index)
+ break;
+
+ buf = wq->to_clean;
+ }
+}
+
+void vnic_wq_free(struct vnic_wq *wq);
+int vnic_wq_alloc(struct vnic_dev *vdev, struct vnic_wq *wq, unsigned int index,
+ unsigned int desc_count, unsigned int desc_size);
+void vnic_wq_init(struct vnic_wq *wq, unsigned int cq_index,
+ unsigned int error_interrupt_enable,
+ unsigned int error_interrupt_offset);
+unsigned int vnic_wq_error_status(struct vnic_wq *wq);
+void vnic_wq_enable(struct vnic_wq *wq);
+int vnic_wq_disable(struct vnic_wq *wq);
+void vnic_wq_clean(struct vnic_wq *wq,
+ void (*buf_clean)(struct vnic_wq *wq, struct vnic_wq_buf *buf));
+
+#endif /* _VNIC_WQ_H_ */
diff --git a/drivers/scsi/fnic/vnic_wq_copy.c b/drivers/scsi/fnic/vnic_wq_copy.c
new file mode 100644
index 00000000000..9eab7e7caf3
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_wq_copy.c
@@ -0,0 +1,117 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+
+#include <linux/errno.h>
+#include <linux/types.h>
+#include <linux/pci.h>
+#include <linux/delay.h>
+#include "vnic_wq_copy.h"
+
+void vnic_wq_copy_enable(struct vnic_wq_copy *wq)
+{
+ iowrite32(1, &wq->ctrl->enable);
+}
+
+int vnic_wq_copy_disable(struct vnic_wq_copy *wq)
+{
+ unsigned int wait;
+
+ iowrite32(0, &wq->ctrl->enable);
+
+ /* Wait for HW to ACK disable request */
+ for (wait = 0; wait < 100; wait++) {
+ if (!(ioread32(&wq->ctrl->running)))
+ return 0;
+ udelay(1);
+ }
+
+ printk(KERN_ERR "Failed to disable Copy WQ[%d],"
+ " fetch index=%d, posted_index=%d\n",
+ wq->index, ioread32(&wq->ctrl->fetch_index),
+ ioread32(&wq->ctrl->posted_index));
+
+ return -ENODEV;
+}
+
+void vnic_wq_copy_clean(struct vnic_wq_copy *wq,
+ void (*q_clean)(struct vnic_wq_copy *wq,
+ struct fcpio_host_req *wq_desc))
+{
+ BUG_ON(ioread32(&wq->ctrl->enable));
+
+ if (vnic_wq_copy_desc_in_use(wq))
+ vnic_wq_copy_service(wq, -1, q_clean);
+
+ wq->to_use_index = wq->to_clean_index = 0;
+
+ iowrite32(0, &wq->ctrl->fetch_index);
+ iowrite32(0, &wq->ctrl->posted_index);
+ iowrite32(0, &wq->ctrl->error_status);
+
+ vnic_dev_clear_desc_ring(&wq->ring);
+}
+
+void vnic_wq_copy_free(struct vnic_wq_copy *wq)
+{
+ struct vnic_dev *vdev;
+
+ vdev = wq->vdev;
+ vnic_dev_free_desc_ring(vdev, &wq->ring);
+ wq->ctrl = NULL;
+}
+
+int vnic_wq_copy_alloc(struct vnic_dev *vdev, struct vnic_wq_copy *wq,
+ unsigned int index, unsigned int desc_count,
+ unsigned int desc_size)
+{
+ int err;
+
+ wq->index = index;
+ wq->vdev = vdev;
+ wq->to_use_index = wq->to_clean_index = 0;
+ wq->ctrl = vnic_dev_get_res(vdev, RES_TYPE_WQ, index);
+ if (!wq->ctrl) {
+ printk(KERN_ERR "Failed to hook COPY WQ[%d] resource\n", index);
+ return -EINVAL;
+ }
+
+ vnic_wq_copy_disable(wq);
+
+ err = vnic_dev_alloc_desc_ring(vdev, &wq->ring, desc_count, desc_size);
+ if (err)
+ return err;
+
+ return 0;
+}
+
+void vnic_wq_copy_init(struct vnic_wq_copy *wq, unsigned int cq_index,
+ unsigned int error_interrupt_enable,
+ unsigned int error_interrupt_offset)
+{
+ u64 paddr;
+
+ paddr = (u64)wq->ring.base_addr | VNIC_PADDR_TARGET;
+ writeq(paddr, &wq->ctrl->ring_base);
+ iowrite32(wq->ring.desc_count, &wq->ctrl->ring_size);
+ iowrite32(0, &wq->ctrl->fetch_index);
+ iowrite32(0, &wq->ctrl->posted_index);
+ iowrite32(cq_index, &wq->ctrl->cq_index);
+ iowrite32(error_interrupt_enable, &wq->ctrl->error_interrupt_enable);
+ iowrite32(error_interrupt_offset, &wq->ctrl->error_interrupt_offset);
+}
+
diff --git a/drivers/scsi/fnic/vnic_wq_copy.h b/drivers/scsi/fnic/vnic_wq_copy.h
new file mode 100644
index 00000000000..6aff9740c3d
--- /dev/null
+++ b/drivers/scsi/fnic/vnic_wq_copy.h
@@ -0,0 +1,128 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _VNIC_WQ_COPY_H_
+#define _VNIC_WQ_COPY_H_
+
+#include <linux/pci.h>
+#include "vnic_wq.h"
+#include "fcpio.h"
+
+#define VNIC_WQ_COPY_MAX 1
+
+struct vnic_wq_copy {
+ unsigned int index;
+ struct vnic_dev *vdev;
+ struct vnic_wq_ctrl __iomem *ctrl; /* memory-mapped */
+ struct vnic_dev_ring ring;
+ unsigned to_use_index;
+ unsigned to_clean_index;
+};
+
+static inline unsigned int vnic_wq_copy_desc_avail(struct vnic_wq_copy *wq)
+{
+ return wq->ring.desc_avail;
+}
+
+static inline unsigned int vnic_wq_copy_desc_in_use(struct vnic_wq_copy *wq)
+{
+ return wq->ring.desc_count - 1 - wq->ring.desc_avail;
+}
+
+static inline void *vnic_wq_copy_next_desc(struct vnic_wq_copy *wq)
+{
+ struct fcpio_host_req *desc = wq->ring.descs;
+ return &desc[wq->to_use_index];
+}
+
+static inline void vnic_wq_copy_post(struct vnic_wq_copy *wq)
+{
+
+ ((wq->to_use_index + 1) == wq->ring.desc_count) ?
+ (wq->to_use_index = 0) : (wq->to_use_index++);
+ wq->ring.desc_avail--;
+
+ /* Adding write memory barrier prevents compiler and/or CPU
+ * reordering, thus avoiding descriptor posting before
+ * descriptor is initialized. Otherwise, hardware can read
+ * stale descriptor fields.
+ */
+ wmb();
+
+ iowrite32(wq->to_use_index, &wq->ctrl->posted_index);
+}
+
+static inline void vnic_wq_copy_desc_process(struct vnic_wq_copy *wq, u16 index)
+{
+ unsigned int cnt;
+
+ if (wq->to_clean_index <= index)
+ cnt = (index - wq->to_clean_index) + 1;
+ else
+ cnt = wq->ring.desc_count - wq->to_clean_index + index + 1;
+
+ wq->to_clean_index = ((index + 1) % wq->ring.desc_count);
+ wq->ring.desc_avail += cnt;
+
+}
+
+static inline void vnic_wq_copy_service(struct vnic_wq_copy *wq,
+ u16 completed_index,
+ void (*q_service)(struct vnic_wq_copy *wq,
+ struct fcpio_host_req *wq_desc))
+{
+ struct fcpio_host_req *wq_desc = wq->ring.descs;
+ unsigned int curr_index;
+
+ while (1) {
+
+ if (q_service)
+ (*q_service)(wq, &wq_desc[wq->to_clean_index]);
+
+ wq->ring.desc_avail++;
+
+ curr_index = wq->to_clean_index;
+
+ /* increment the to-clean index so that we start
+ * with an unprocessed index next time we enter the loop
+ */
+ ((wq->to_clean_index + 1) == wq->ring.desc_count) ?
+ (wq->to_clean_index = 0) : (wq->to_clean_index++);
+
+ if (curr_index == completed_index)
+ break;
+
+ /* we have cleaned all the entries */
+ if ((completed_index == (u16)-1) &&
+ (wq->to_clean_index == wq->to_use_index))
+ break;
+ }
+}
+
+void vnic_wq_copy_enable(struct vnic_wq_copy *wq);
+int vnic_wq_copy_disable(struct vnic_wq_copy *wq);
+void vnic_wq_copy_free(struct vnic_wq_copy *wq);
+int vnic_wq_copy_alloc(struct vnic_dev *vdev, struct vnic_wq_copy *wq,
+ unsigned int index, unsigned int desc_count, unsigned int desc_size);
+void vnic_wq_copy_init(struct vnic_wq_copy *wq, unsigned int cq_index,
+ unsigned int error_interrupt_enable,
+ unsigned int error_interrupt_offset);
+void vnic_wq_copy_clean(struct vnic_wq_copy *wq,
+ void (*q_clean)(struct vnic_wq_copy *wq,
+ struct fcpio_host_req *wq_desc));
+
+#endif /* _VNIC_WQ_COPY_H_ */
diff --git a/drivers/scsi/fnic/wq_enet_desc.h b/drivers/scsi/fnic/wq_enet_desc.h
new file mode 100644
index 00000000000..b121cbad18b
--- /dev/null
+++ b/drivers/scsi/fnic/wq_enet_desc.h
@@ -0,0 +1,96 @@
+/*
+ * Copyright 2008 Cisco Systems, Inc. All rights reserved.
+ * Copyright 2007 Nuova Systems, Inc. All rights reserved.
+ *
+ * This program is free software; you may redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation; version 2 of the License.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
+ * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
+ * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS
+ * BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN
+ * ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN
+ * CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
+ * SOFTWARE.
+ */
+#ifndef _WQ_ENET_DESC_H_
+#define _WQ_ENET_DESC_H_
+
+/* Ethernet work queue descriptor: 16B */
+struct wq_enet_desc {
+ __le64 address;
+ __le16 length;
+ __le16 mss_loopback;
+ __le16 header_length_flags;
+ __le16 vlan_tag;
+};
+
+#define WQ_ENET_ADDR_BITS 64
+#define WQ_ENET_LEN_BITS 14
+#define WQ_ENET_LEN_MASK ((1 << WQ_ENET_LEN_BITS) - 1)
+#define WQ_ENET_MSS_BITS 14
+#define WQ_ENET_MSS_MASK ((1 << WQ_ENET_MSS_BITS) - 1)
+#define WQ_ENET_MSS_SHIFT 2
+#define WQ_ENET_LOOPBACK_SHIFT 1
+#define WQ_ENET_HDRLEN_BITS 10
+#define WQ_ENET_HDRLEN_MASK ((1 << WQ_ENET_HDRLEN_BITS) - 1)
+#define WQ_ENET_FLAGS_OM_BITS 2
+#define WQ_ENET_FLAGS_OM_MASK ((1 << WQ_ENET_FLAGS_OM_BITS) - 1)
+#define WQ_ENET_FLAGS_EOP_SHIFT 12
+#define WQ_ENET_FLAGS_CQ_ENTRY_SHIFT 13
+#define WQ_ENET_FLAGS_FCOE_ENCAP_SHIFT 14
+#define WQ_ENET_FLAGS_VLAN_TAG_INSERT_SHIFT 15
+
+#define WQ_ENET_OFFLOAD_MODE_CSUM 0
+#define WQ_ENET_OFFLOAD_MODE_RESERVED 1
+#define WQ_ENET_OFFLOAD_MODE_CSUM_L4 2
+#define WQ_ENET_OFFLOAD_MODE_TSO 3
+
+static inline void wq_enet_desc_enc(struct wq_enet_desc *desc,
+ u64 address, u16 length, u16 mss, u16 header_length,
+ u8 offload_mode, u8 eop, u8 cq_entry, u8 fcoe_encap,
+ u8 vlan_tag_insert, u16 vlan_tag, u8 loopback)
+{
+ desc->address = cpu_to_le64(address);
+ desc->length = cpu_to_le16(length & WQ_ENET_LEN_MASK);
+ desc->mss_loopback = cpu_to_le16((mss & WQ_ENET_MSS_MASK) <<
+ WQ_ENET_MSS_SHIFT | (loopback & 1) << WQ_ENET_LOOPBACK_SHIFT);
+ desc->header_length_flags = cpu_to_le16(
+ (header_length & WQ_ENET_HDRLEN_MASK) |
+ (offload_mode & WQ_ENET_FLAGS_OM_MASK) << WQ_ENET_HDRLEN_BITS |
+ (eop & 1) << WQ_ENET_FLAGS_EOP_SHIFT |
+ (cq_entry & 1) << WQ_ENET_FLAGS_CQ_ENTRY_SHIFT |
+ (fcoe_encap & 1) << WQ_ENET_FLAGS_FCOE_ENCAP_SHIFT |
+ (vlan_tag_insert & 1) << WQ_ENET_FLAGS_VLAN_TAG_INSERT_SHIFT);
+ desc->vlan_tag = cpu_to_le16(vlan_tag);
+}
+
+static inline void wq_enet_desc_dec(struct wq_enet_desc *desc,
+ u64 *address, u16 *length, u16 *mss, u16 *header_length,
+ u8 *offload_mode, u8 *eop, u8 *cq_entry, u8 *fcoe_encap,
+ u8 *vlan_tag_insert, u16 *vlan_tag, u8 *loopback)
+{
+ *address = le64_to_cpu(desc->address);
+ *length = le16_to_cpu(desc->length) & WQ_ENET_LEN_MASK;
+ *mss = (le16_to_cpu(desc->mss_loopback) >> WQ_ENET_MSS_SHIFT) &
+ WQ_ENET_MSS_MASK;
+ *loopback = (u8)((le16_to_cpu(desc->mss_loopback) >>
+ WQ_ENET_LOOPBACK_SHIFT) & 1);
+ *header_length = le16_to_cpu(desc->header_length_flags) &
+ WQ_ENET_HDRLEN_MASK;
+ *offload_mode = (u8)((le16_to_cpu(desc->header_length_flags) >>
+ WQ_ENET_HDRLEN_BITS) & WQ_ENET_FLAGS_OM_MASK);
+ *eop = (u8)((le16_to_cpu(desc->header_length_flags) >>
+ WQ_ENET_FLAGS_EOP_SHIFT) & 1);
+ *cq_entry = (u8)((le16_to_cpu(desc->header_length_flags) >>
+ WQ_ENET_FLAGS_CQ_ENTRY_SHIFT) & 1);
+ *fcoe_encap = (u8)((le16_to_cpu(desc->header_length_flags) >>
+ WQ_ENET_FLAGS_FCOE_ENCAP_SHIFT) & 1);
+ *vlan_tag_insert = (u8)((le16_to_cpu(desc->header_length_flags) >>
+ WQ_ENET_FLAGS_VLAN_TAG_INSERT_SHIFT) & 1);
+ *vlan_tag = le16_to_cpu(desc->vlan_tag);
+}
+
+#endif /* _WQ_ENET_DESC_H_ */
diff --git a/drivers/scsi/ipr.c b/drivers/scsi/ipr.c
index c09d77591f9..dd689ded860 100644
--- a/drivers/scsi/ipr.c
+++ b/drivers/scsi/ipr.c
@@ -3654,6 +3654,7 @@ static int ipr_slave_configure(struct scsi_device *sdev)
{
struct ipr_ioa_cfg *ioa_cfg = (struct ipr_ioa_cfg *) sdev->host->hostdata;
struct ipr_resource_entry *res;
+ struct ata_port *ap = NULL;
unsigned long lock_flags = 0;
spin_lock_irqsave(ioa_cfg->host->host_lock, lock_flags);
@@ -3672,12 +3673,16 @@ static int ipr_slave_configure(struct scsi_device *sdev)
}
if (ipr_is_vset_device(res) || ipr_is_scsi_disk(res))
sdev->allow_restart = 1;
- if (ipr_is_gata(res) && res->sata_port) {
+ if (ipr_is_gata(res) && res->sata_port)
+ ap = res->sata_port->ap;
+ spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
+
+ if (ap) {
scsi_adjust_queue_depth(sdev, 0, IPR_MAX_CMD_PER_ATA_LUN);
- ata_sas_slave_configure(sdev, res->sata_port->ap);
- } else {
+ ata_sas_slave_configure(sdev, ap);
+ } else
scsi_adjust_queue_depth(sdev, 0, sdev->host->cmd_per_lun);
- }
+ return 0;
}
spin_unlock_irqrestore(ioa_cfg->host->host_lock, lock_flags);
return 0;
diff --git a/drivers/scsi/iscsi_tcp.c b/drivers/scsi/iscsi_tcp.c
index b3e5e08e44a..b7c092d63bb 100644
--- a/drivers/scsi/iscsi_tcp.c
+++ b/drivers/scsi/iscsi_tcp.c
@@ -463,7 +463,7 @@ static int iscsi_sw_tcp_pdu_init(struct iscsi_task *task,
}
if (err) {
- iscsi_conn_failure(conn, err);
+ /* got invalid offset/len */
return -EIO;
}
return 0;
@@ -851,6 +851,7 @@ static struct scsi_host_template iscsi_sw_tcp_sht = {
.use_clustering = DISABLE_CLUSTERING,
.slave_alloc = iscsi_sw_tcp_slave_alloc,
.slave_configure = iscsi_sw_tcp_slave_configure,
+ .target_alloc = iscsi_target_alloc,
.proc_name = "iscsi_tcp",
.this_id = -1,
};
diff --git a/drivers/scsi/libfc/fc_disc.c b/drivers/scsi/libfc/fc_disc.c
index e57556ea5b4..4c880656990 100644
--- a/drivers/scsi/libfc/fc_disc.c
+++ b/drivers/scsi/libfc/fc_disc.c
@@ -113,6 +113,11 @@ void fc_disc_stop_rports(struct fc_disc *disc)
lport->tt.rport_logoff(rport);
}
+ list_for_each_entry_safe(rdata, next, &disc->rogue_rports, peers) {
+ rport = PRIV_TO_RPORT(rdata);
+ lport->tt.rport_logoff(rport);
+ }
+
mutex_unlock(&disc->disc_mutex);
}
@@ -131,23 +136,32 @@ static void fc_disc_rport_callback(struct fc_lport *lport,
{
struct fc_rport_libfc_priv *rdata = rport->dd_data;
struct fc_disc *disc = &lport->disc;
- int found = 0;
FC_DEBUG_DISC("Received a %d event for port (%6x)\n", event,
rport->port_id);
- if (event == RPORT_EV_CREATED) {
+ switch (event) {
+ case RPORT_EV_CREATED:
if (disc) {
- found = 1;
mutex_lock(&disc->disc_mutex);
list_add_tail(&rdata->peers, &disc->rports);
mutex_unlock(&disc->disc_mutex);
}
+ break;
+ case RPORT_EV_LOGO:
+ case RPORT_EV_FAILED:
+ case RPORT_EV_STOP:
+ mutex_lock(&disc->disc_mutex);
+ mutex_lock(&rdata->rp_mutex);
+ if (rdata->trans_state == FC_PORTSTATE_ROGUE)
+ list_del(&rdata->peers);
+ mutex_unlock(&rdata->rp_mutex);
+ mutex_unlock(&disc->disc_mutex);
+ break;
+ default:
+ break;
}
- if (!found)
- FC_DEBUG_DISC("The rport (%6x) is not maintained "
- "by the discovery layer\n", rport->port_id);
}
/**
@@ -439,6 +453,7 @@ static int fc_disc_new_target(struct fc_disc *disc,
rdata = rport->dd_data;
rdata->ops = &fc_disc_rport_ops;
rdata->rp_state = RPORT_ST_INIT;
+ list_add_tail(&rdata->peers, &disc->rogue_rports);
lport->tt.rport_login(rport);
}
}
@@ -461,21 +476,29 @@ static void fc_disc_del_target(struct fc_disc *disc, struct fc_rport *rport)
/**
* fc_disc_done() - Discovery has been completed
* @disc: FC discovery context
+ * Locking Note: This function expects that the disc mutex is locked before
+ * it is called. The discovery callback is then made with the lock released,
+ * and the lock is re-taken before returning from this function
*/
static void fc_disc_done(struct fc_disc *disc)
{
struct fc_lport *lport = disc->lport;
+ enum fc_disc_event event;
FC_DEBUG_DISC("Discovery complete for port (%6x)\n",
fc_host_port_id(lport->host));
- disc->disc_callback(lport, disc->event);
+ event = disc->event;
disc->event = DISC_EV_NONE;
if (disc->requested)
fc_disc_gpn_ft_req(disc);
else
disc->pending = 0;
+
+ mutex_unlock(&disc->disc_mutex);
+ disc->disc_callback(lport, event);
+ mutex_lock(&disc->disc_mutex);
}
/**
@@ -622,6 +645,8 @@ static int fc_disc_gpn_ft_parse(struct fc_disc *disc, void *buf, size_t len)
rdata = rport->dd_data;
rdata->ops = &fc_disc_rport_ops;
rdata->local_port = lport;
+ list_add_tail(&rdata->peers,
+ &disc->rogue_rports);
lport->tt.rport_login(rport);
} else
FC_DBG("Failed to allocate memory for "
@@ -681,8 +706,8 @@ static void fc_disc_timeout(struct work_struct *work)
* @fp: response frame
* @lp_arg: Fibre Channel host port instance
*
- * Locking Note: This function expects that the disc_mutex is locked
- * before it is called.
+ * Locking Note: This function is called without disc mutex held, and
+ * should do all its processing with the mutex held
*/
static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp,
void *disc_arg)
@@ -695,11 +720,13 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp,
unsigned int len;
int error;
+ mutex_lock(&disc->disc_mutex);
FC_DEBUG_DISC("Received a GPN_FT response on port (%6x)\n",
fc_host_port_id(disc->lport->host));
if (IS_ERR(fp)) {
fc_disc_error(disc, fp);
+ mutex_unlock(&disc->disc_mutex);
return;
}
@@ -744,6 +771,8 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp,
disc->seq_count++;
}
fc_frame_free(fp);
+
+ mutex_unlock(&disc->disc_mutex);
}
/**
@@ -757,7 +786,6 @@ static void fc_disc_gpn_ft_resp(struct fc_seq *sp, struct fc_frame *fp,
static void fc_disc_single(struct fc_disc *disc, struct fc_disc_port *dp)
{
struct fc_lport *lport;
- struct fc_rport *rport;
struct fc_rport *new_rport;
struct fc_rport_libfc_priv *rdata;
@@ -766,15 +794,12 @@ static void fc_disc_single(struct fc_disc *disc, struct fc_disc_port *dp)
if (dp->ids.port_id == fc_host_port_id(lport->host))
goto out;
- rport = lport->tt.rport_lookup(lport, dp->ids.port_id);
- if (rport)
- fc_disc_del_target(disc, rport);
-
new_rport = lport->tt.rport_create(dp);
if (new_rport) {
rdata = new_rport->dd_data;
rdata->ops = &fc_disc_rport_ops;
kfree(dp);
+ list_add_tail(&rdata->peers, &disc->rogue_rports);
lport->tt.rport_login(new_rport);
}
return;
@@ -836,6 +861,7 @@ int fc_disc_init(struct fc_lport *lport)
INIT_DELAYED_WORK(&disc->disc_work, fc_disc_timeout);
mutex_init(&disc->disc_mutex);
INIT_LIST_HEAD(&disc->rports);
+ INIT_LIST_HEAD(&disc->rogue_rports);
disc->lport = lport;
disc->delay = FC_DISC_DELAY;
diff --git a/drivers/scsi/libfc/fc_elsct.c b/drivers/scsi/libfc/fc_elsct.c
index dd47fe619d1..5878b34bff1 100644
--- a/drivers/scsi/libfc/fc_elsct.c
+++ b/drivers/scsi/libfc/fc_elsct.c
@@ -41,7 +41,7 @@ static struct fc_seq *fc_elsct_send(struct fc_lport *lport,
void *arg, u32 timer_msec)
{
enum fc_rctl r_ctl;
- u32 did;
+ u32 did = FC_FID_NONE;
enum fc_fh_type fh_type;
int rc;
diff --git a/drivers/scsi/libfc/fc_fcp.c b/drivers/scsi/libfc/fc_fcp.c
index f555ae99ad4..521f996f9b1 100644
--- a/drivers/scsi/libfc/fc_fcp.c
+++ b/drivers/scsi/libfc/fc_fcp.c
@@ -713,7 +713,7 @@ done:
static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
{
struct fc_fcp_pkt *fsp = (struct fc_fcp_pkt *)arg;
- struct fc_lport *lp;
+ struct fc_lport *lport = fsp->lp;
struct fc_frame_header *fh;
struct fcp_txrdy *dd;
u8 r_ctl;
@@ -724,9 +724,8 @@ static void fc_fcp_recv(struct fc_seq *seq, struct fc_frame *fp, void *arg)
fh = fc_frame_header_get(fp);
r_ctl = fh->fh_r_ctl;
- lp = fsp->lp;
- if (!(lp->state & LPORT_ST_READY))
+ if (!(lport->state & LPORT_ST_READY))
goto out;
if (fc_fcp_lock_pkt(fsp))
goto out;
@@ -779,7 +778,7 @@ errout:
if (IS_ERR(fp))
fc_fcp_error(fsp, fp);
else if (rc == -ENOMEM)
- fc_fcp_reduce_can_queue(lp);
+ fc_fcp_reduce_can_queue(lport);
}
static void fc_fcp_resp(struct fc_fcp_pkt *fsp, struct fc_frame *fp)
diff --git a/drivers/scsi/libfc/fc_lport.c b/drivers/scsi/libfc/fc_lport.c
index b8178ef398d..e0c247724d2 100644
--- a/drivers/scsi/libfc/fc_lport.c
+++ b/drivers/scsi/libfc/fc_lport.c
@@ -618,6 +618,11 @@ int fc_fabric_logoff(struct fc_lport *lport)
{
lport->tt.disc_stop_final(lport);
mutex_lock(&lport->lp_mutex);
+ if (lport->dns_rp)
+ lport->tt.rport_logoff(lport->dns_rp);
+ mutex_unlock(&lport->lp_mutex);
+ lport->tt.rport_flush_queue();
+ mutex_lock(&lport->lp_mutex);
fc_lport_enter_logo(lport);
mutex_unlock(&lport->lp_mutex);
cancel_delayed_work_sync(&lport->retry_work);
@@ -639,7 +644,12 @@ EXPORT_SYMBOL(fc_fabric_logoff);
*/
int fc_lport_destroy(struct fc_lport *lport)
{
+ mutex_lock(&lport->lp_mutex);
+ lport->state = LPORT_ST_NONE;
+ lport->link_up = 0;
lport->tt.frame_send = fc_frame_drop;
+ mutex_unlock(&lport->lp_mutex);
+
lport->tt.fcp_abort_io(lport);
lport->tt.exch_mgr_reset(lport, 0, 0);
return 0;
@@ -1032,17 +1042,19 @@ static void fc_lport_rft_id_resp(struct fc_seq *sp, struct fc_frame *fp,
FC_DEBUG_LPORT("Received a RFT_ID response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_RFT_ID) {
FC_DBG("Received a RFT_ID response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
fh = fc_frame_header_get(fp);
ct = fc_frame_payload_get(fp, sizeof(*ct));
@@ -1084,17 +1096,19 @@ static void fc_lport_rpn_id_resp(struct fc_seq *sp, struct fc_frame *fp,
FC_DEBUG_LPORT("Received a RPN_ID response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_RPN_ID) {
FC_DBG("Received a RPN_ID response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
fh = fc_frame_header_get(fp);
ct = fc_frame_payload_get(fp, sizeof(*ct));
if (fh && ct && fh->fh_type == FC_TYPE_CT &&
@@ -1134,17 +1148,19 @@ static void fc_lport_scr_resp(struct fc_seq *sp, struct fc_frame *fp,
FC_DEBUG_LPORT("Received a SCR response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_SCR) {
FC_DBG("Received a SCR response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC)
fc_lport_enter_ready(lport);
@@ -1360,17 +1376,19 @@ static void fc_lport_logo_resp(struct fc_seq *sp, struct fc_frame *fp,
FC_DEBUG_LPORT("Received a LOGO response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_LOGO) {
FC_DBG("Received a LOGO response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC)
fc_lport_enter_reset(lport);
@@ -1400,10 +1418,6 @@ static void fc_lport_enter_logo(struct fc_lport *lport)
fc_lport_state_enter(lport, LPORT_ST_LOGO);
- /* DNS session should be closed so we can release it here */
- if (lport->dns_rp)
- lport->tt.rport_logoff(lport->dns_rp);
-
fp = fc_frame_alloc(lport, sizeof(*logo));
if (!fp) {
fc_lport_error(lport, fp);
@@ -1444,17 +1458,19 @@ static void fc_lport_flogi_resp(struct fc_seq *sp, struct fc_frame *fp,
FC_DEBUG_LPORT("Received a FLOGI response\n");
- if (IS_ERR(fp)) {
- fc_lport_error(lport, fp);
- goto err;
- }
-
if (lport->state != LPORT_ST_FLOGI) {
FC_DBG("Received a FLOGI response, but in state %s\n",
fc_lport_state(lport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_lport_error(lport, fp);
+ goto err;
+ }
+
fh = fc_frame_header_get(fp);
did = ntoh24(fh->fh_d_id);
if (fc_frame_payload_op(fp) == ELS_LS_ACC && did != 0) {
diff --git a/drivers/scsi/libfc/fc_rport.c b/drivers/scsi/libfc/fc_rport.c
index 0472bb73221..747d73c5c8a 100644
--- a/drivers/scsi/libfc/fc_rport.c
+++ b/drivers/scsi/libfc/fc_rport.c
@@ -267,6 +267,10 @@ static void fc_rport_work(struct work_struct *work)
"(%6x).\n", ids.port_id);
event = RPORT_EV_FAILED;
}
+ if (rport->port_id != FC_FID_DIR_SERV)
+ if (rport_ops->event_callback)
+ rport_ops->event_callback(lport, rport,
+ RPORT_EV_FAILED);
put_device(&rport->dev);
rport = new_rport;
rdata = new_rport->dd_data;
@@ -325,11 +329,20 @@ int fc_rport_login(struct fc_rport *rport)
int fc_rport_logoff(struct fc_rport *rport)
{
struct fc_rport_libfc_priv *rdata = rport->dd_data;
+ struct fc_lport *lport = rdata->local_port;
mutex_lock(&rdata->rp_mutex);
FC_DEBUG_RPORT("Remove port (%6x)\n", rport->port_id);
+ if (rdata->rp_state == RPORT_ST_NONE) {
+ FC_DEBUG_RPORT("(%6x): Port (%6x) in NONE state,"
+ " not removing", fc_host_port_id(lport->host),
+ rport->port_id);
+ mutex_unlock(&rdata->rp_mutex);
+ goto out;
+ }
+
fc_rport_enter_logo(rport);
/*
@@ -349,6 +362,7 @@ int fc_rport_logoff(struct fc_rport *rport)
mutex_unlock(&rdata->rp_mutex);
+out:
return 0;
}
@@ -430,6 +444,7 @@ static void fc_rport_error(struct fc_rport *rport, struct fc_frame *fp)
case RPORT_ST_PRLI:
case RPORT_ST_LOGO:
rdata->event = RPORT_EV_FAILED;
+ fc_rport_state_enter(rport, RPORT_ST_NONE);
queue_work(rport_event_queue,
&rdata->event_work);
break;
@@ -494,7 +509,7 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp,
struct fc_rport *rport = rp_arg;
struct fc_rport_libfc_priv *rdata = rport->dd_data;
struct fc_lport *lport = rdata->local_port;
- struct fc_els_flogi *plp;
+ struct fc_els_flogi *plp = NULL;
unsigned int tov;
u16 csp_seq;
u16 cssp_seq;
@@ -505,17 +520,19 @@ static void fc_rport_plogi_resp(struct fc_seq *sp, struct fc_frame *fp,
FC_DEBUG_RPORT("Received a PLOGI response from port (%6x)\n",
rport->port_id);
- if (IS_ERR(fp)) {
- fc_rport_error_retry(rport, fp);
- goto err;
- }
-
if (rdata->rp_state != RPORT_ST_PLOGI) {
FC_DBG("Received a PLOGI response, but in state %s\n",
fc_rport_state(rport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_rport_error_retry(rport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC &&
(plp = fc_frame_payload_get(fp, sizeof(*plp))) != NULL) {
@@ -614,17 +631,19 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
FC_DEBUG_RPORT("Received a PRLI response from port (%6x)\n",
rport->port_id);
- if (IS_ERR(fp)) {
- fc_rport_error_retry(rport, fp);
- goto err;
- }
-
if (rdata->rp_state != RPORT_ST_PRLI) {
FC_DBG("Received a PRLI response, but in state %s\n",
fc_rport_state(rport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_rport_error_retry(rport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC) {
pp = fc_frame_payload_get(fp, sizeof(*pp));
@@ -646,6 +665,7 @@ static void fc_rport_prli_resp(struct fc_seq *sp, struct fc_frame *fp,
} else {
FC_DBG("Bad ELS response\n");
rdata->event = RPORT_EV_FAILED;
+ fc_rport_state_enter(rport, RPORT_ST_NONE);
queue_work(rport_event_queue, &rdata->event_work);
}
@@ -678,23 +698,26 @@ static void fc_rport_logo_resp(struct fc_seq *sp, struct fc_frame *fp,
FC_DEBUG_RPORT("Received a LOGO response from port (%6x)\n",
rport->port_id);
- if (IS_ERR(fp)) {
- fc_rport_error_retry(rport, fp);
- goto err;
- }
-
if (rdata->rp_state != RPORT_ST_LOGO) {
FC_DEBUG_RPORT("Received a LOGO response, but in state %s\n",
fc_rport_state(rport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_rport_error_retry(rport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC) {
fc_rport_enter_rtv(rport);
} else {
FC_DBG("Bad ELS response\n");
rdata->event = RPORT_EV_LOGO;
+ fc_rport_state_enter(rport, RPORT_ST_NONE);
queue_work(rport_event_queue, &rdata->event_work);
}
@@ -764,17 +787,19 @@ static void fc_rport_rtv_resp(struct fc_seq *sp, struct fc_frame *fp,
FC_DEBUG_RPORT("Received a RTV response from port (%6x)\n",
rport->port_id);
- if (IS_ERR(fp)) {
- fc_rport_error(rport, fp);
- goto err;
- }
-
if (rdata->rp_state != RPORT_ST_RTV) {
FC_DBG("Received a RTV response, but in state %s\n",
fc_rport_state(rport));
+ if (IS_ERR(fp))
+ goto err;
goto out;
}
+ if (IS_ERR(fp)) {
+ fc_rport_error(rport, fp);
+ goto err;
+ }
+
op = fc_frame_payload_op(fp);
if (op == ELS_LS_ACC) {
struct fc_els_rtv_acc *rtv;
@@ -1007,6 +1032,8 @@ static void fc_rport_recv_plogi_req(struct fc_rport *rport,
default:
FC_DEBUG_RPORT("incoming PLOGI from %x in unexpected "
"state %d\n", sid, rdata->rp_state);
+ fc_frame_free(fp);
+ return;
break;
}
@@ -1098,6 +1125,8 @@ static void fc_rport_recv_prli_req(struct fc_rport *rport,
reason = ELS_RJT_NONE;
break;
default:
+ fc_frame_free(rx_fp);
+ return;
break;
}
len = fr_len(rx_fp) - sizeof(*fh);
@@ -1227,6 +1256,11 @@ static void fc_rport_recv_prlo_req(struct fc_rport *rport, struct fc_seq *sp,
"while in state %s\n", ntoh24(fh->fh_s_id),
fc_rport_state(rport));
+ if (rdata->rp_state == RPORT_ST_NONE) {
+ fc_frame_free(fp);
+ return;
+ }
+
rjt_data.fp = NULL;
rjt_data.reason = ELS_RJT_UNAB;
rjt_data.explan = ELS_EXPL_NONE;
@@ -1256,7 +1290,13 @@ static void fc_rport_recv_logo_req(struct fc_rport *rport, struct fc_seq *sp,
"while in state %s\n", ntoh24(fh->fh_s_id),
fc_rport_state(rport));
+ if (rdata->rp_state == RPORT_ST_NONE) {
+ fc_frame_free(fp);
+ return;
+ }
+
rdata->event = RPORT_EV_LOGO;
+ fc_rport_state_enter(rport, RPORT_ST_NONE);
queue_work(rport_event_queue, &rdata->event_work);
lport->tt.seq_els_rsp_send(sp, ELS_LS_ACC, NULL);
diff --git a/drivers/scsi/libiscsi.c b/drivers/scsi/libiscsi.c
index 68962835916..e72b4ad47d3 100644
--- a/drivers/scsi/libiscsi.c
+++ b/drivers/scsi/libiscsi.c
@@ -1463,6 +1463,16 @@ int iscsi_change_queue_depth(struct scsi_device *sdev, int depth)
}
EXPORT_SYMBOL_GPL(iscsi_change_queue_depth);
+int iscsi_target_alloc(struct scsi_target *starget)
+{
+ struct iscsi_cls_session *cls_session = starget_to_session(starget);
+ struct iscsi_session *session = cls_session->dd_data;
+
+ starget->can_queue = session->scsi_cmds_max;
+ return 0;
+}
+EXPORT_SYMBOL_GPL(iscsi_target_alloc);
+
void iscsi_session_recovery_timedout(struct iscsi_cls_session *cls_session)
{
struct iscsi_session *session = cls_session->dd_data;
diff --git a/drivers/scsi/libiscsi_tcp.c b/drivers/scsi/libiscsi_tcp.c
index 91f8ce4d8d0..b579ca9f483 100644
--- a/drivers/scsi/libiscsi_tcp.c
+++ b/drivers/scsi/libiscsi_tcp.c
@@ -1036,8 +1036,11 @@ flush:
rc = conn->session->tt->init_pdu(task, r2t->data_offset + r2t->sent,
r2t->data_count);
- if (rc)
+ if (rc) {
+ iscsi_conn_failure(conn, ISCSI_ERR_XMIT_FAILED);
return rc;
+ }
+
r2t->sent += r2t->data_count;
goto flush;
}
diff --git a/drivers/scsi/lpfc/lpfc.h b/drivers/scsi/lpfc/lpfc.h
index dcba267db71..1105f9a111b 100644
--- a/drivers/scsi/lpfc/lpfc.h
+++ b/drivers/scsi/lpfc/lpfc.h
@@ -443,6 +443,7 @@ struct lpfc_hba {
uint32_t hba_flag; /* hba generic flags */
#define HBA_ERATT_HANDLED 0x1 /* This flag is set when eratt handled */
+#define DEFER_ERATT 0x4 /* Deferred error attention in progress */
struct lpfc_dmabuf slim2p;
MAILBOX_t *mbox;
@@ -723,4 +724,3 @@ lpfc_sli_read_hs(struct lpfc_hba *phba)
return;
}
-
diff --git a/drivers/scsi/lpfc/lpfc_attr.c b/drivers/scsi/lpfc/lpfc_attr.c
index 40cf0f4f327..c14f0cbdb12 100644
--- a/drivers/scsi/lpfc/lpfc_attr.c
+++ b/drivers/scsi/lpfc/lpfc_attr.c
@@ -51,7 +51,7 @@
#define LPFC_LINK_SPEED_STRING "0, 1, 2, 4, 8"
/**
- * lpfc_jedec_to_ascii: Hex to ascii convertor according to JEDEC rules.
+ * lpfc_jedec_to_ascii - Hex to ascii convertor according to JEDEC rules
* @incr: integer to convert.
* @hdw: ascii string holding converted integer plus a string terminator.
*
@@ -82,7 +82,7 @@ lpfc_jedec_to_ascii(int incr, char hdw[])
}
/**
- * lpfc_drvr_version_show: Return the Emulex driver string with version number.
+ * lpfc_drvr_version_show - Return the Emulex driver string with version number
* @dev: class unused variable.
* @attr: device attribute, not used.
* @buf: on return contains the module description text.
@@ -152,7 +152,7 @@ lpfc_bg_reftag_err_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_info_show: Return some pci info about the host in ascii.
+ * lpfc_info_show - Return some pci info about the host in ascii
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the formatted text from lpfc_info().
@@ -169,7 +169,7 @@ lpfc_info_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_serialnum_show: Return the hba serial number in ascii.
+ * lpfc_serialnum_show - Return the hba serial number in ascii
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the formatted text serial number.
@@ -188,7 +188,7 @@ lpfc_serialnum_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_temp_sensor_show: Return the temperature sensor level.
+ * lpfc_temp_sensor_show - Return the temperature sensor level
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the formatted support level.
@@ -210,7 +210,7 @@ lpfc_temp_sensor_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_modeldesc_show: Return the model description of the hba.
+ * lpfc_modeldesc_show - Return the model description of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd model description.
@@ -229,7 +229,7 @@ lpfc_modeldesc_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_modelname_show: Return the model name of the hba.
+ * lpfc_modelname_show - Return the model name of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd model name.
@@ -248,7 +248,7 @@ lpfc_modelname_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_programtype_show: Return the program type of the hba.
+ * lpfc_programtype_show - Return the program type of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd program type.
@@ -267,7 +267,7 @@ lpfc_programtype_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_mlomgmt_show: Return the Menlo Maintenance sli flag.
+ * lpfc_mlomgmt_show - Return the Menlo Maintenance sli flag
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the Menlo Maintenance sli flag.
@@ -286,7 +286,7 @@ lpfc_mlomgmt_show(struct device *dev, struct device_attribute *attr, char *buf)
}
/**
- * lpfc_vportnum_show: Return the port number in ascii of the hba.
+ * lpfc_vportnum_show - Return the port number in ascii of the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains scsi vpd program type.
@@ -305,7 +305,7 @@ lpfc_vportnum_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_fwrev_show: Return the firmware rev running in the hba.
+ * lpfc_fwrev_show - Return the firmware rev running in the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd program type.
@@ -326,7 +326,7 @@ lpfc_fwrev_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_hdw_show: Return the jedec information about the hba.
+ * lpfc_hdw_show - Return the jedec information about the hba
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the scsi vpd program type.
@@ -347,7 +347,7 @@ lpfc_hdw_show(struct device *dev, struct device_attribute *attr, char *buf)
}
/**
- * lpfc_option_rom_version_show: Return the adapter ROM FCode version.
+ * lpfc_option_rom_version_show - Return the adapter ROM FCode version
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the ROM and FCode ascii strings.
@@ -366,7 +366,7 @@ lpfc_option_rom_version_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_state_show: Return the link state of the port.
+ * lpfc_state_show - Return the link state of the port
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains text describing the state of the link.
@@ -451,7 +451,7 @@ lpfc_link_state_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_num_discovered_ports_show: Return sum of mapped and unmapped vports.
+ * lpfc_num_discovered_ports_show - Return sum of mapped and unmapped vports
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the sum of fc mapped and unmapped.
@@ -474,7 +474,7 @@ lpfc_num_discovered_ports_show(struct device *dev,
}
/**
- * lpfc_issue_lip: Misnomer, name carried over from long ago.
+ * lpfc_issue_lip - Misnomer, name carried over from long ago
* @shost: Scsi_Host pointer.
*
* Description:
@@ -529,7 +529,7 @@ lpfc_issue_lip(struct Scsi_Host *shost)
}
/**
- * lpfc_do_offline: Issues a mailbox command to bring the link down.
+ * lpfc_do_offline - Issues a mailbox command to bring the link down
* @phba: lpfc_hba pointer.
* @type: LPFC_EVT_OFFLINE, LPFC_EVT_WARM_START, LPFC_EVT_KILL.
*
@@ -537,7 +537,7 @@ lpfc_issue_lip(struct Scsi_Host *shost)
* Assumes any error from lpfc_do_offline() will be negative.
* Can wait up to 5 seconds for the port ring buffers count
* to reach zero, prints a warning if it is not zero and continues.
- * lpfc_workq_post_event() returns a non-zero return coce if call fails.
+ * lpfc_workq_post_event() returns a non-zero return code if call fails.
*
* Returns:
* -EIO error posting the event
@@ -591,7 +591,7 @@ lpfc_do_offline(struct lpfc_hba *phba, uint32_t type)
}
/**
- * lpfc_selective_reset: Offline then onlines the port.
+ * lpfc_selective_reset - Offline then onlines the port
* @phba: lpfc_hba pointer.
*
* Description:
@@ -632,7 +632,7 @@ lpfc_selective_reset(struct lpfc_hba *phba)
}
/**
- * lpfc_issue_reset: Selectively resets an adapter.
+ * lpfc_issue_reset - Selectively resets an adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing the string "selective".
@@ -672,7 +672,7 @@ lpfc_issue_reset(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_nport_evt_cnt_show: Return the number of nport events.
+ * lpfc_nport_evt_cnt_show - Return the number of nport events
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the ascii number of nport events.
@@ -691,7 +691,7 @@ lpfc_nport_evt_cnt_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_board_mode_show: Return the state of the board.
+ * lpfc_board_mode_show - Return the state of the board
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the state of the adapter.
@@ -720,7 +720,7 @@ lpfc_board_mode_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_board_mode_store: Puts the hba in online, offline, warm or error state.
+ * lpfc_board_mode_store - Puts the hba in online, offline, warm or error state
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing one of the strings "online", "offline", "warm" or "error".
@@ -766,14 +766,14 @@ lpfc_board_mode_store(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_get_hba_info: Return various bits of informaton about the adapter.
+ * lpfc_get_hba_info - Return various bits of informaton about the adapter
* @phba: pointer to the adapter structure.
- * @mxri max xri count.
- * @axri available xri count.
- * @mrpi max rpi count.
- * @arpi available rpi count.
- * @mvpi max vpi count.
- * @avpi available vpi count.
+ * @mxri: max xri count.
+ * @axri: available xri count.
+ * @mrpi: max rpi count.
+ * @arpi: available rpi count.
+ * @mvpi: max vpi count.
+ * @avpi: available vpi count.
*
* Description:
* If an integer pointer for an count is not null then the value for the
@@ -846,7 +846,7 @@ lpfc_get_hba_info(struct lpfc_hba *phba,
}
/**
- * lpfc_max_rpi_show: Return maximum rpi.
+ * lpfc_max_rpi_show - Return maximum rpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the maximum rpi count in decimal or "Unknown".
@@ -874,7 +874,7 @@ lpfc_max_rpi_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_used_rpi_show: Return maximum rpi minus available rpi.
+ * lpfc_used_rpi_show - Return maximum rpi minus available rpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing the used rpi count in decimal or "Unknown".
@@ -902,7 +902,7 @@ lpfc_used_rpi_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_max_xri_show: Return maximum xri.
+ * lpfc_max_xri_show - Return maximum xri
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the maximum xri count in decimal or "Unknown".
@@ -930,7 +930,7 @@ lpfc_max_xri_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_used_xri_show: Return maximum xpi minus the available xpi.
+ * lpfc_used_xri_show - Return maximum xpi minus the available xpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the used xri count in decimal or "Unknown".
@@ -958,7 +958,7 @@ lpfc_used_xri_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_max_vpi_show: Return maximum vpi.
+ * lpfc_max_vpi_show - Return maximum vpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the maximum vpi count in decimal or "Unknown".
@@ -986,7 +986,7 @@ lpfc_max_vpi_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_used_vpi_show: Return maximum vpi minus the available vpi.
+ * lpfc_used_vpi_show - Return maximum vpi minus the available vpi
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the used vpi count in decimal or "Unknown".
@@ -1014,7 +1014,7 @@ lpfc_used_vpi_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_npiv_info_show: Return text about NPIV support for the adapter.
+ * lpfc_npiv_info_show - Return text about NPIV support for the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: text that must be interpreted to determine if npiv is supported.
@@ -1042,7 +1042,7 @@ lpfc_npiv_info_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_poll_show: Return text about poll support for the adapter.
+ * lpfc_poll_show - Return text about poll support for the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: on return contains the cfg_poll in hex.
@@ -1064,7 +1064,7 @@ lpfc_poll_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_poll_store: Set the value of cfg_poll for the adapter.
+ * lpfc_poll_store - Set the value of cfg_poll for the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: one or more lpfc_polling_flags values.
@@ -1136,7 +1136,7 @@ lpfc_poll_store(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_param_show: Return a cfg attribute value in decimal.
+ * lpfc_param_show - Return a cfg attribute value in decimal
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
@@ -1164,7 +1164,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
}
/**
- * lpfc_param_hex_show: Return a cfg attribute value in hex.
+ * lpfc_param_hex_show - Return a cfg attribute value in hex
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
@@ -1173,7 +1173,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
* lpfc_##attr##_show: Return the hex value of an adapters cfg_xxx field.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: on return contains the attribute value in hexidecimal.
+ * @buf: on return contains the attribute value in hexadecimal.
*
* Returns: size of formatted string.
**/
@@ -1192,7 +1192,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
}
/**
- * lpfc_param_init: Intializes a cfg attribute.
+ * lpfc_param_init - Intializes a cfg attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
@@ -1226,7 +1226,7 @@ lpfc_##attr##_init(struct lpfc_hba *phba, int val) \
}
/**
- * lpfc_param_set: Set a cfg attribute value.
+ * lpfc_param_set - Set a cfg attribute value
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
@@ -1260,7 +1260,7 @@ lpfc_##attr##_set(struct lpfc_hba *phba, int val) \
}
/**
- * lpfc_param_store: Set a vport attribute value.
+ * lpfc_param_store - Set a vport attribute value
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
@@ -1300,7 +1300,7 @@ lpfc_##attr##_store(struct device *dev, struct device_attribute *attr, \
}
/**
- * lpfc_vport_param_show: Return decimal formatted cfg attribute value.
+ * lpfc_vport_param_show - Return decimal formatted cfg attribute value
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
@@ -1326,17 +1326,17 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
}
/**
- * lpfc_vport_param_hex_show: Return hex formatted attribute value.
+ * lpfc_vport_param_hex_show - Return hex formatted attribute value
*
* Description:
* Macro that given an attr e.g.
* hba_queue_depth expands into a function with the name
* lpfc_hba_queue_depth_show
*
- * lpfc_##attr##_show: prints the attribute value in hexidecimal.
+ * lpfc_##attr##_show: prints the attribute value in hexadecimal.
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: on return contains the attribute value in hexidecimal.
+ * @buf: on return contains the attribute value in hexadecimal.
*
* Returns: length of formatted string.
**/
@@ -1353,7 +1353,7 @@ lpfc_##attr##_show(struct device *dev, struct device_attribute *attr, \
}
/**
- * lpfc_vport_param_init: Initialize a vport cfg attribute.
+ * lpfc_vport_param_init - Initialize a vport cfg attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
@@ -1386,7 +1386,7 @@ lpfc_##attr##_init(struct lpfc_vport *vport, int val) \
}
/**
- * lpfc_vport_param_set: Set a vport cfg attribute.
+ * lpfc_vport_param_set - Set a vport cfg attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth expands
@@ -1417,7 +1417,7 @@ lpfc_##attr##_set(struct lpfc_vport *vport, int val) \
}
/**
- * lpfc_vport_param_store: Set a vport attribute.
+ * lpfc_vport_param_store - Set a vport attribute
*
* Description:
* Macro that given an attr e.g. hba_queue_depth
@@ -1576,7 +1576,7 @@ static DEVICE_ATTR(lpfc_temp_sensor, S_IRUGO, lpfc_temp_sensor_show, NULL);
static char *lpfc_soft_wwn_key = "C99G71SL8032A";
/**
- * lpfc_soft_wwn_enable_store: Allows setting of the wwn if the key is valid.
+ * lpfc_soft_wwn_enable_store - Allows setting of the wwn if the key is valid
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
* @buf: containing the string lpfc_soft_wwn_key.
@@ -1623,10 +1623,10 @@ static DEVICE_ATTR(lpfc_soft_wwn_enable, S_IWUSR, NULL,
lpfc_soft_wwn_enable_store);
/**
- * lpfc_soft_wwpn_show: Return the cfg soft ww port name of the adapter.
+ * lpfc_soft_wwpn_show - Return the cfg soft ww port name of the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: on return contains the wwpn in hexidecimal.
+ * @buf: on return contains the wwpn in hexadecimal.
*
* Returns: size of formatted string.
**/
@@ -1643,10 +1643,10 @@ lpfc_soft_wwpn_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_soft_wwpn_store: Set the ww port name of the adapter.
+ * lpfc_soft_wwpn_store - Set the ww port name of the adapter
* @dev class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: contains the wwpn in hexidecimal.
+ * @buf: contains the wwpn in hexadecimal.
* @count: number of wwpn bytes in buf
*
* Returns:
@@ -1729,10 +1729,10 @@ static DEVICE_ATTR(lpfc_soft_wwpn, S_IRUGO | S_IWUSR,\
lpfc_soft_wwpn_show, lpfc_soft_wwpn_store);
/**
- * lpfc_soft_wwnn_show: Return the cfg soft ww node name for the adapter.
+ * lpfc_soft_wwnn_show - Return the cfg soft ww node name for the adapter
* @dev: class device that is converted into a Scsi_host.
* @attr: device attribute, not used.
- * @buf: on return contains the wwnn in hexidecimal.
+ * @buf: on return contains the wwnn in hexadecimal.
*
* Returns: size of formatted string.
**/
@@ -1747,9 +1747,9 @@ lpfc_soft_wwnn_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_soft_wwnn_store: sets the ww node name of the adapter.
+ * lpfc_soft_wwnn_store - sets the ww node name of the adapter
* @cdev: class device that is converted into a Scsi_host.
- * @buf: contains the ww node name in hexidecimal.
+ * @buf: contains the ww node name in hexadecimal.
* @count: number of wwnn bytes in buf.
*
* Returns:
@@ -1845,7 +1845,7 @@ MODULE_PARM_DESC(lpfc_nodev_tmo,
"for a device to come back");
/**
- * lpfc_nodev_tmo_show: Return the hba dev loss timeout value.
+ * lpfc_nodev_tmo_show - Return the hba dev loss timeout value
* @dev: class converted to a Scsi_host structure.
* @attr: device attribute, not used.
* @buf: on return contains the dev loss timeout in decimal.
@@ -1864,7 +1864,7 @@ lpfc_nodev_tmo_show(struct device *dev, struct device_attribute *attr,
}
/**
- * lpfc_nodev_tmo_init: Set the hba nodev timeout value.
+ * lpfc_nodev_tmo_init - Set the hba nodev timeout value
* @vport: lpfc vport structure pointer.
* @val: contains the nodev timeout value.
*
@@ -1905,7 +1905,7 @@ lpfc_nodev_tmo_init(struct lpfc_vport *vport, int val)
}
/**
- * lpfc_update_rport_devloss_tmo: Update dev loss tmo value.
+ * lpfc_update_rport_devloss_tmo - Update dev loss tmo value
* @vport: lpfc vport structure pointer.
*
* Description:
@@ -1926,7 +1926,7 @@ lpfc_update_rport_devloss_tmo(struct lpfc_vport *vport)
}
/**
- * lpfc_nodev_tmo_set: Set the vport nodev tmo and devloss tmo values.
+ * lpfc_nodev_tmo_set - Set the vport nodev tmo and devloss tmo values
* @vport: lpfc vport structure pointer.
* @val: contains the tmo value.
*
@@ -1982,7 +1982,7 @@ lpfc_vport_param_init(devloss_tmo, LPFC_DEF_DEVLOSS_TMO,
lpfc_vport_param_show(devloss_tmo)
/**
- * lpfc_devloss_tmo_set: Sets vport nodev tmo, devloss tmo values, changed bit.
+ * lpfc_devloss_tmo_set - Sets vport nodev tmo, devloss tmo values, changed bit
* @vport: lpfc vport structure pointer.
* @val: contains the tmo value.
*
@@ -2094,7 +2094,7 @@ MODULE_PARM_DESC(lpfc_restrict_login,
lpfc_vport_param_show(restrict_login);
/**
- * lpfc_restrict_login_init: Set the vport restrict login flag.
+ * lpfc_restrict_login_init - Set the vport restrict login flag
* @vport: lpfc vport structure pointer.
* @val: contains the restrict login value.
*
@@ -2128,7 +2128,7 @@ lpfc_restrict_login_init(struct lpfc_vport *vport, int val)
}
/**
- * lpfc_restrict_login_set: Set the vport restrict login flag.
+ * lpfc_restrict_login_set - Set the vport restrict login flag
* @vport: lpfc vport structure pointer.
* @val: contains the restrict login value.
*
@@ -2201,7 +2201,7 @@ LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1,
*/
/**
- * lpfc_topology_set: Set the adapters topology field.
+ * lpfc_topology_set - Set the adapters topology field
* @phba: lpfc_hba pointer.
* @val: topology value.
*
@@ -2216,18 +2216,41 @@ LPFC_VPORT_ATTR_R(scan_down, 1, 0, 1,
* non-zero return value from lpfc_issue_lip()
* -EINVAL val out of range
**/
-static int
-lpfc_topology_set(struct lpfc_hba *phba, int val)
+static ssize_t
+lpfc_topology_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ int val = 0;
+ int nolip = 0;
+ const char *val_buf = buf;
int err;
uint32_t prev_val;
+
+ if (!strncmp(buf, "nolip ", strlen("nolip "))) {
+ nolip = 1;
+ val_buf = &buf[strlen("nolip ")];
+ }
+
+ if (!isdigit(val_buf[0]))
+ return -EINVAL;
+ if (sscanf(val_buf, "%i", &val) != 1)
+ return -EINVAL;
+
if (val >= 0 && val <= 6) {
prev_val = phba->cfg_topology;
phba->cfg_topology = val;
+ if (nolip)
+ return strlen(buf);
+
err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
- if (err)
+ if (err) {
phba->cfg_topology = prev_val;
- return err;
+ return -EINVAL;
+ } else
+ return strlen(buf);
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
"%d:0467 lpfc_topology attribute cannot be set to %d, "
@@ -2240,14 +2263,12 @@ module_param(lpfc_topology, int, 0);
MODULE_PARM_DESC(lpfc_topology, "Select Fibre Channel topology");
lpfc_param_show(topology)
lpfc_param_init(topology, 0, 0, 6)
-lpfc_param_store(topology)
static DEVICE_ATTR(lpfc_topology, S_IRUGO | S_IWUSR,
lpfc_topology_show, lpfc_topology_store);
/**
- * lpfc_stat_data_ctrl_store: write call back for lpfc_stat_data_ctrl
- * sysfs file.
+ * lpfc_stat_data_ctrl_store - write call back for lpfc_stat_data_ctrl sysfs file
* @dev: Pointer to class device.
* @buf: Data buffer.
* @count: Size of the data buffer.
@@ -2282,7 +2303,7 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr,
unsigned long base, step, bucket_type;
if (!strncmp(buf, "setbucket", strlen("setbucket"))) {
- if (strlen(buf) > LPFC_MAX_DATA_CTRL_LEN)
+ if (strlen(buf) > (LPFC_MAX_DATA_CTRL_LEN - 1))
return -EINVAL;
strcpy(bucket_data, buf);
@@ -2411,8 +2432,7 @@ lpfc_stat_data_ctrl_store(struct device *dev, struct device_attribute *attr,
/**
- * lpfc_stat_data_ctrl_show: Read callback function for
- * lpfc_stat_data_ctrl sysfs file.
+ * lpfc_stat_data_ctrl_show - Read function for lpfc_stat_data_ctrl sysfs file
* @dev: Pointer to class device object.
* @buf: Data buffer.
*
@@ -2489,8 +2509,7 @@ static DEVICE_ATTR(lpfc_stat_data_ctrl, S_IRUGO | S_IWUSR,
/**
- * sysfs_drvr_stat_data_read: Read callback function for lpfc_drvr_stat_data
- * sysfs attribute.
+ * sysfs_drvr_stat_data_read - Read function for lpfc_drvr_stat_data attribute
* @kobj: Pointer to the kernel object
* @bin_attr: Attribute object
* @buff: Buffer pointer
@@ -2585,7 +2604,7 @@ static struct bin_attribute sysfs_drvr_stat_data_attr = {
*/
/**
- * lpfc_link_speed_set: Set the adapters link speed.
+ * lpfc_link_speed_set - Set the adapters link speed
* @phba: lpfc_hba pointer.
* @val: link speed value.
*
@@ -2601,12 +2620,29 @@ static struct bin_attribute sysfs_drvr_stat_data_attr = {
* non-zero return value from lpfc_issue_lip()
* -EINVAL val out of range
**/
-static int
-lpfc_link_speed_set(struct lpfc_hba *phba, int val)
+static ssize_t
+lpfc_link_speed_store(struct device *dev, struct device_attribute *attr,
+ const char *buf, size_t count)
{
+ struct Scsi_Host *shost = class_to_shost(dev);
+ struct lpfc_vport *vport = (struct lpfc_vport *) shost->hostdata;
+ struct lpfc_hba *phba = vport->phba;
+ int val = 0;
+ int nolip = 0;
+ const char *val_buf = buf;
int err;
uint32_t prev_val;
+ if (!strncmp(buf, "nolip ", strlen("nolip "))) {
+ nolip = 1;
+ val_buf = &buf[strlen("nolip ")];
+ }
+
+ if (!isdigit(val_buf[0]))
+ return -EINVAL;
+ if (sscanf(val_buf, "%i", &val) != 1)
+ return -EINVAL;
+
if (((val == LINK_SPEED_1G) && !(phba->lmt & LMT_1Gb)) ||
((val == LINK_SPEED_2G) && !(phba->lmt & LMT_2Gb)) ||
((val == LINK_SPEED_4G) && !(phba->lmt & LMT_4Gb)) ||
@@ -2614,14 +2650,19 @@ lpfc_link_speed_set(struct lpfc_hba *phba, int val)
((val == LINK_SPEED_10G) && !(phba->lmt & LMT_10Gb)))
return -EINVAL;
- if ((val >= 0 && val <= LPFC_MAX_LINK_SPEED)
+ if ((val >= 0 && val <= 8)
&& (LPFC_LINK_SPEED_BITMAP & (1 << val))) {
prev_val = phba->cfg_link_speed;
phba->cfg_link_speed = val;
+ if (nolip)
+ return strlen(buf);
+
err = lpfc_issue_lip(lpfc_shost_from_vport(phba->pport));
- if (err)
+ if (err) {
phba->cfg_link_speed = prev_val;
- return err;
+ return -EINVAL;
+ } else
+ return strlen(buf);
}
lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
@@ -2637,7 +2678,7 @@ MODULE_PARM_DESC(lpfc_link_speed, "Select link speed");
lpfc_param_show(link_speed)
/**
- * lpfc_link_speed_init: Set the adapters link speed.
+ * lpfc_link_speed_init - Set the adapters link speed
* @phba: lpfc_hba pointer.
* @val: link speed value.
*
@@ -2668,7 +2709,6 @@ lpfc_link_speed_init(struct lpfc_hba *phba, int val)
return -EINVAL;
}
-lpfc_param_store(link_speed)
static DEVICE_ATTR(lpfc_link_speed, S_IRUGO | S_IWUSR,
lpfc_link_speed_show, lpfc_link_speed_store);
@@ -2865,7 +2905,7 @@ MODULE_PARM_DESC(lpfc_prot_guard, "host protection guard type");
/*
- * lpfc_sg_seg_cnt: Initial Maximum DMA Segment Count
+ * lpfc_sg_seg_cnt - Initial Maximum DMA Segment Count
* This value can be set to values between 64 and 256. The default value is
* 64, but may be increased to allow for larger Max I/O sizes. The scsi layer
* will be allowed to request I/Os of sizes up to (MAX_SEG_COUNT * SEG_SIZE).
@@ -2967,7 +3007,7 @@ struct device_attribute *lpfc_vport_attrs[] = {
};
/**
- * sysfs_ctlreg_write: Write method for writing to ctlreg.
+ * sysfs_ctlreg_write - Write method for writing to ctlreg
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: contains the data to be written to the adapter IOREG space.
@@ -3017,7 +3057,7 @@ sysfs_ctlreg_write(struct kobject *kobj, struct bin_attribute *bin_attr,
}
/**
- * sysfs_ctlreg_read: Read method for reading from ctlreg.
+ * sysfs_ctlreg_read - Read method for reading from ctlreg
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: if succesful contains the data from the adapter IOREG space.
@@ -3078,7 +3118,7 @@ static struct bin_attribute sysfs_ctlreg_attr = {
};
/**
- * sysfs_mbox_idle: frees the sysfs mailbox.
+ * sysfs_mbox_idle - frees the sysfs mailbox
* @phba: lpfc_hba pointer
**/
static void
@@ -3095,7 +3135,7 @@ sysfs_mbox_idle(struct lpfc_hba *phba)
}
/**
- * sysfs_mbox_write: Write method for writing information via mbox.
+ * sysfs_mbox_write - Write method for writing information via mbox
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: contains the data to be written to sysfs mbox.
@@ -3170,7 +3210,7 @@ sysfs_mbox_write(struct kobject *kobj, struct bin_attribute *bin_attr,
}
/**
- * sysfs_mbox_read: Read method for reading information via mbox.
+ * sysfs_mbox_read - Read method for reading information via mbox
* @kobj: kernel kobject that contains the kernel class device.
* @bin_attr: kernel attributes passed to us.
* @buf: contains the data to be read from sysfs mbox.
@@ -3374,7 +3414,7 @@ static struct bin_attribute sysfs_mbox_attr = {
};
/**
- * lpfc_alloc_sysfs_attr: Creates the ctlreg and mbox entries.
+ * lpfc_alloc_sysfs_attr - Creates the ctlreg and mbox entries
* @vport: address of lpfc vport structure.
*
* Return codes:
@@ -3415,7 +3455,7 @@ out:
}
/**
- * lpfc_free_sysfs_attr: Removes the ctlreg and mbox entries.
+ * lpfc_free_sysfs_attr - Removes the ctlreg and mbox entries
* @vport: address of lpfc vport structure.
**/
void
@@ -3437,7 +3477,7 @@ lpfc_free_sysfs_attr(struct lpfc_vport *vport)
*/
/**
- * lpfc_get_host_port_id: Copy the vport DID into the scsi host port id.
+ * lpfc_get_host_port_id - Copy the vport DID into the scsi host port id
* @shost: kernel scsi host pointer.
**/
static void
@@ -3450,7 +3490,7 @@ lpfc_get_host_port_id(struct Scsi_Host *shost)
}
/**
- * lpfc_get_host_port_type: Set the value of the scsi host port type.
+ * lpfc_get_host_port_type - Set the value of the scsi host port type
* @shost: kernel scsi host pointer.
**/
static void
@@ -3482,7 +3522,7 @@ lpfc_get_host_port_type(struct Scsi_Host *shost)
}
/**
- * lpfc_get_host_port_state: Set the value of the scsi host port state.
+ * lpfc_get_host_port_state - Set the value of the scsi host port state
* @shost: kernel scsi host pointer.
**/
static void
@@ -3520,7 +3560,7 @@ lpfc_get_host_port_state(struct Scsi_Host *shost)
}
/**
- * lpfc_get_host_speed: Set the value of the scsi host speed.
+ * lpfc_get_host_speed - Set the value of the scsi host speed
* @shost: kernel scsi host pointer.
**/
static void
@@ -3556,7 +3596,7 @@ lpfc_get_host_speed(struct Scsi_Host *shost)
}
/**
- * lpfc_get_host_fabric_name: Set the value of the scsi host fabric name.
+ * lpfc_get_host_fabric_name - Set the value of the scsi host fabric name
* @shost: kernel scsi host pointer.
**/
static void
@@ -3582,7 +3622,7 @@ lpfc_get_host_fabric_name (struct Scsi_Host *shost)
}
/**
- * lpfc_get_stats: Return statistical information about the adapter.
+ * lpfc_get_stats - Return statistical information about the adapter
* @shost: kernel scsi host pointer.
*
* Notes:
@@ -3707,7 +3747,7 @@ lpfc_get_stats(struct Scsi_Host *shost)
}
/**
- * lpfc_reset_stats: Copy the adapter link stats information.
+ * lpfc_reset_stats - Copy the adapter link stats information
* @shost: kernel scsi host pointer.
**/
static void
@@ -3788,7 +3828,7 @@ lpfc_reset_stats(struct Scsi_Host *shost)
*/
/**
- * lpfc_get_node_by_target: Return the nodelist for a target.
+ * lpfc_get_node_by_target - Return the nodelist for a target
* @starget: kernel scsi target pointer.
*
* Returns:
@@ -3817,7 +3857,7 @@ lpfc_get_node_by_target(struct scsi_target *starget)
}
/**
- * lpfc_get_starget_port_id: Set the target port id to the ndlp DID or -1.
+ * lpfc_get_starget_port_id - Set the target port id to the ndlp DID or -1
* @starget: kernel scsi target pointer.
**/
static void
@@ -3829,7 +3869,7 @@ lpfc_get_starget_port_id(struct scsi_target *starget)
}
/**
- * lpfc_get_starget_node_name: Set the target node name.
+ * lpfc_get_starget_node_name - Set the target node name
* @starget: kernel scsi target pointer.
*
* Description: Set the target node name to the ndlp node name wwn or zero.
@@ -3844,7 +3884,7 @@ lpfc_get_starget_node_name(struct scsi_target *starget)
}
/**
- * lpfc_get_starget_port_name: Set the target port name.
+ * lpfc_get_starget_port_name - Set the target port name
* @starget: kernel scsi target pointer.
*
* Description: set the target port name to the ndlp port name wwn or zero.
@@ -3859,7 +3899,7 @@ lpfc_get_starget_port_name(struct scsi_target *starget)
}
/**
- * lpfc_set_rport_loss_tmo: Set the rport dev loss tmo.
+ * lpfc_set_rport_loss_tmo - Set the rport dev loss tmo
* @rport: fc rport address.
* @timeout: new value for dev loss tmo.
*
@@ -3877,7 +3917,7 @@ lpfc_set_rport_loss_tmo(struct fc_rport *rport, uint32_t timeout)
}
/**
- * lpfc_rport_show_function: Return rport target information.
+ * lpfc_rport_show_function - Return rport target information
*
* Description:
* Macro that uses field to generate a function with the name lpfc_show_rport_
@@ -3905,7 +3945,7 @@ lpfc_show_rport_##field (struct device *dev, \
static FC_RPORT_ATTR(field, S_IRUGO, lpfc_show_rport_##field, NULL)
/**
- * lpfc_set_vport_symbolic_name: Set the vport's symbolic name.
+ * lpfc_set_vport_symbolic_name - Set the vport's symbolic name
* @fc_vport: The fc_vport who's symbolic name has been changed.
*
* Description:
@@ -4048,7 +4088,7 @@ struct fc_function_template lpfc_vport_transport_functions = {
};
/**
- * lpfc_get_cfgparam: Used during probe_one to init the adapter structure.
+ * lpfc_get_cfgparam - Used during probe_one to init the adapter structure
* @phba: lpfc_hba pointer.
**/
void
@@ -4097,7 +4137,7 @@ lpfc_get_cfgparam(struct lpfc_hba *phba)
}
/**
- * lpfc_get_vport_cfgparam: Used during port create, init the vport structure.
+ * lpfc_get_vport_cfgparam - Used during port create, init the vport structure
* @vport: lpfc_vport pointer.
**/
void
diff --git a/drivers/scsi/lpfc/lpfc_crtn.h b/drivers/scsi/lpfc/lpfc_crtn.h
index 07f4976319a..f88ce3f2619 100644
--- a/drivers/scsi/lpfc/lpfc_crtn.h
+++ b/drivers/scsi/lpfc/lpfc_crtn.h
@@ -184,6 +184,8 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *);
struct lpfc_iocbq * lpfc_sli_get_iocbq(struct lpfc_hba *);
void lpfc_sli_release_iocbq(struct lpfc_hba *, struct lpfc_iocbq *);
uint16_t lpfc_sli_next_iotag(struct lpfc_hba *, struct lpfc_iocbq *);
+void lpfc_sli_cancel_iocbs(struct lpfc_hba *, struct list_head *, uint32_t,
+ uint32_t);
void lpfc_reset_barrier(struct lpfc_hba * phba);
int lpfc_sli_brdready(struct lpfc_hba *, uint32_t);
diff --git a/drivers/scsi/lpfc/lpfc_debugfs.c b/drivers/scsi/lpfc/lpfc_debugfs.c
index 81cdcf46c47..52be5644e07 100644
--- a/drivers/scsi/lpfc/lpfc_debugfs.c
+++ b/drivers/scsi/lpfc/lpfc_debugfs.c
@@ -47,7 +47,7 @@
#include "lpfc_debugfs.h"
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
-/**
+/*
* debugfs interface
*
* To access this interface the user should:
@@ -95,7 +95,7 @@ module_param(lpfc_debugfs_max_slow_ring_trc, int, 0);
MODULE_PARM_DESC(lpfc_debugfs_max_slow_ring_trc,
"Set debugfs slow ring trace depth");
-int lpfc_debugfs_mask_disc_trc;
+static int lpfc_debugfs_mask_disc_trc;
module_param(lpfc_debugfs_mask_disc_trc, int, 0);
MODULE_PARM_DESC(lpfc_debugfs_mask_disc_trc,
"Set debugfs discovery trace mask");
@@ -127,7 +127,7 @@ static atomic_t lpfc_debugfs_seq_trc_cnt = ATOMIC_INIT(0);
static unsigned long lpfc_debugfs_start_time = 0L;
/**
- * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer.
+ * lpfc_debugfs_disc_trc_data - Dump discovery logging to a buffer
* @vport: The vport to gather the log info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
@@ -187,7 +187,7 @@ lpfc_debugfs_disc_trc_data(struct lpfc_vport *vport, char *buf, int size)
}
/**
- * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer.
+ * lpfc_debugfs_slow_ring_trc_data - Dump slow ring logging to a buffer
* @phba: The HBA to gather the log info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
@@ -250,7 +250,7 @@ lpfc_debugfs_slow_ring_trc_data(struct lpfc_hba *phba, char *buf, int size)
static int lpfc_debugfs_last_hbq = -1;
/**
- * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer.
+ * lpfc_debugfs_hbqinfo_data - Dump host buffer queue info to a buffer
* @phba: The HBA to gather host buffer info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
@@ -369,7 +369,7 @@ skipit:
static int lpfc_debugfs_last_hba_slim_off;
/**
- * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer.
+ * lpfc_debugfs_dumpHBASlim_data - Dump HBA SLIM info to a buffer
* @phba: The HBA to gather SLIM info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
@@ -399,8 +399,7 @@ lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size)
len += snprintf(buf+len, size-len, "HBA SLIM\n");
lpfc_memcpy_from_slim(buffer,
- ((uint8_t *)phba->MBslimaddr) + lpfc_debugfs_last_hba_slim_off,
- 1024);
+ phba->MBslimaddr + lpfc_debugfs_last_hba_slim_off, 1024);
ptr = (uint32_t *)&buffer[0];
off = lpfc_debugfs_last_hba_slim_off;
@@ -426,7 +425,7 @@ lpfc_debugfs_dumpHBASlim_data(struct lpfc_hba *phba, char *buf, int size)
}
/**
- * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer.
+ * lpfc_debugfs_dumpHostSlim_data - Dump host SLIM info to a buffer
* @phba: The HBA to gather Host SLIM info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
@@ -501,7 +500,7 @@ lpfc_debugfs_dumpHostSlim_data(struct lpfc_hba *phba, char *buf, int size)
}
/**
- * lpfc_debugfs_nodelist_data - Dump target node list to a buffer.
+ * lpfc_debugfs_nodelist_data - Dump target node list to a buffer
* @vport: The vport to gather target node info from.
* @buf: The buffer to dump log into.
* @size: The maximum amount of data to process.
@@ -599,7 +598,7 @@ lpfc_debugfs_nodelist_data(struct lpfc_vport *vport, char *buf, int size)
#endif
/**
- * lpfc_debugfs_disc_trc - Store discovery trace log.
+ * lpfc_debugfs_disc_trc - Store discovery trace log
* @vport: The vport to associate this trace string with for retrieval.
* @mask: Log entry classification.
* @fmt: Format string to be displayed when dumping the log.
@@ -643,7 +642,7 @@ lpfc_debugfs_disc_trc(struct lpfc_vport *vport, int mask, char *fmt,
}
/**
- * lpfc_debugfs_slow_ring_trc - Store slow ring trace log.
+ * lpfc_debugfs_slow_ring_trc - Store slow ring trace log
* @phba: The phba to associate this trace string with for retrieval.
* @fmt: Format string to be displayed when dumping the log.
* @data1: 1st data parameter to be applied to @fmt.
@@ -682,7 +681,7 @@ lpfc_debugfs_slow_ring_trc(struct lpfc_hba *phba, char *fmt,
#ifdef CONFIG_SCSI_LPFC_DEBUG_FS
/**
- * lpfc_debugfs_disc_trc_open - Open the discovery trace log.
+ * lpfc_debugfs_disc_trc_open - Open the discovery trace log
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
@@ -732,7 +731,7 @@ out:
}
/**
- * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log.
+ * lpfc_debugfs_slow_ring_trc_open - Open the Slow Ring trace log
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
@@ -782,7 +781,7 @@ out:
}
/**
- * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer.
+ * lpfc_debugfs_hbqinfo_open - Open the hbqinfo debugfs buffer
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
@@ -824,7 +823,7 @@ out:
}
/**
- * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer.
+ * lpfc_debugfs_dumpHBASlim_open - Open the Dump HBA SLIM debugfs buffer
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
@@ -866,7 +865,7 @@ out:
}
/**
- * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer.
+ * lpfc_debugfs_dumpHostSlim_open - Open the Dump Host SLIM debugfs buffer
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
@@ -993,7 +992,7 @@ lpfc_debugfs_dumpDataDif_write(struct file *file, const char __user *buf,
/**
- * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file.
+ * lpfc_debugfs_nodelist_open - Open the nodelist debugfs file
* @inode: The inode pointer that contains a vport pointer.
* @file: The file pointer to attach the log output.
*
@@ -1035,7 +1034,7 @@ out:
}
/**
- * lpfc_debugfs_lseek - Seek through a debugfs file.
+ * lpfc_debugfs_lseek - Seek through a debugfs file
* @file: The file pointer to seek through.
* @off: The offset to seek to or the amount to seek by.
* @whence: Indicates how to seek.
@@ -1073,7 +1072,7 @@ lpfc_debugfs_lseek(struct file *file, loff_t off, int whence)
}
/**
- * lpfc_debugfs_read - Read a debugfs file.
+ * lpfc_debugfs_read - Read a debugfs file
* @file: The file pointer to read from.
* @buf: The buffer to copy the data to.
* @nbytes: The number of bytes to read.
@@ -1098,7 +1097,7 @@ lpfc_debugfs_read(struct file *file, char __user *buf,
}
/**
- * lpfc_debugfs_release - Release the buffer used to store debugfs file data.
+ * lpfc_debugfs_release - Release the buffer used to store debugfs file data
* @inode: The inode pointer that contains a vport pointer. (unused)
* @file: The file pointer that contains the buffer to release.
*
@@ -1210,7 +1209,7 @@ static atomic_t lpfc_debugfs_hba_count;
#endif
/**
- * lpfc_debugfs_initialize - Initialize debugfs for a vport.
+ * lpfc_debugfs_initialize - Initialize debugfs for a vport
* @vport: The vport pointer to initialize.
*
* Description:
@@ -1434,7 +1433,7 @@ debug_failed:
}
/**
- * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport.
+ * lpfc_debugfs_terminate - Tear down debugfs infrastructure for this vport
* @vport: The vport pointer to remove from debugfs.
*
* Description:
diff --git a/drivers/scsi/lpfc/lpfc_disc.h b/drivers/scsi/lpfc/lpfc_disc.h
index f29e548a90d..ffd10897207 100644
--- a/drivers/scsi/lpfc/lpfc_disc.h
+++ b/drivers/scsi/lpfc/lpfc_disc.h
@@ -99,6 +99,7 @@ struct lpfc_nodelist {
#define NLP_USG_FREE_ACK_BIT 0x8 /* Indicate ndlp memory free invoked */
struct timer_list nlp_delayfunc; /* Used for delayed ELS cmds */
+ struct lpfc_hba *phba;
struct fc_rport *rport; /* Corresponding FC transport
port structure */
struct lpfc_vport *vport;
diff --git a/drivers/scsi/lpfc/lpfc_els.c b/drivers/scsi/lpfc/lpfc_els.c
index a7302480bc4..b8b34cf5c3d 100644
--- a/drivers/scsi/lpfc/lpfc_els.c
+++ b/drivers/scsi/lpfc/lpfc_els.c
@@ -55,7 +55,7 @@ static void lpfc_register_new_vport(struct lpfc_hba *phba,
static int lpfc_max_els_tries = 3;
/**
- * lpfc_els_chk_latt: Check host link attention event for a vport.
+ * lpfc_els_chk_latt - Check host link attention event for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine checks whether there is an outstanding host link
@@ -116,7 +116,7 @@ lpfc_els_chk_latt(struct lpfc_vport *vport)
}
/**
- * lpfc_prep_els_iocb: Allocate and prepare a lpfc iocb data structure.
+ * lpfc_prep_els_iocb - Allocate and prepare a lpfc iocb data structure
* @vport: pointer to a host virtual N_Port data structure.
* @expectRsp: flag indicating whether response is expected.
* @cmdSize: size of the ELS command.
@@ -290,7 +290,7 @@ els_iocb_free_pcmb_exit:
}
/**
- * lpfc_issue_fabric_reglogin: Issue fabric registration login for a vport.
+ * lpfc_issue_fabric_reglogin - Issue fabric registration login for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues a fabric registration login for a @vport. An
@@ -386,7 +386,7 @@ fail:
}
/**
- * lpfc_cmpl_els_flogi_fabric: Completion function for flogi to a fabric port.
+ * lpfc_cmpl_els_flogi_fabric - Completion function for flogi to a fabric port
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @sp: pointer to service parameter data structure.
@@ -509,7 +509,7 @@ lpfc_cmpl_els_flogi_fabric(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
}
/**
- * lpfc_cmpl_els_flogi_nport: Completion function for flogi to an N_Port.
+ * lpfc_cmpl_els_flogi_nport - Completion function for flogi to an N_Port
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @sp: pointer to service parameter data structure.
@@ -626,7 +626,7 @@ fail:
}
/**
- * lpfc_cmpl_els_flogi: Completion callback function for flogi.
+ * lpfc_cmpl_els_flogi - Completion callback function for flogi
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
@@ -751,7 +751,7 @@ out:
}
/**
- * lpfc_issue_els_flogi: Issue an flogi iocb command for a vport.
+ * lpfc_issue_els_flogi - Issue an flogi iocb command for a vport
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
@@ -849,7 +849,7 @@ lpfc_issue_els_flogi(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
}
/**
- * lpfc_els_abort_flogi: Abort all outstanding flogi iocbs.
+ * lpfc_els_abort_flogi - Abort all outstanding flogi iocbs
* @phba: pointer to lpfc hba data structure.
*
* This routine aborts all the outstanding Fabric Login (FLOGI) IOCBs
@@ -898,7 +898,7 @@ lpfc_els_abort_flogi(struct lpfc_hba *phba)
}
/**
- * lpfc_initial_flogi: Issue an initial fabric login for a vport.
+ * lpfc_initial_flogi - Issue an initial fabric login for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues an initial Fabric Login (FLOGI) for the @vport
@@ -949,7 +949,7 @@ lpfc_initial_flogi(struct lpfc_vport *vport)
}
/**
- * lpfc_initial_fdisc: Issue an initial fabric discovery for a vport.
+ * lpfc_initial_fdisc - Issue an initial fabric discovery for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues an initial Fabric Discover (FDISC) for the @vport
@@ -998,7 +998,7 @@ lpfc_initial_fdisc(struct lpfc_vport *vport)
}
/**
- * lpfc_more_plogi: Check and issue remaining plogis for a vport.
+ * lpfc_more_plogi - Check and issue remaining plogis for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine checks whether there are more remaining Port Logins
@@ -1031,7 +1031,7 @@ lpfc_more_plogi(struct lpfc_vport *vport)
}
/**
- * lpfc_plogi_confirm_nport: Confirm pologi wwpn matches stored ndlp.
+ * lpfc_plogi_confirm_nport - Confirm pologi wwpn matches stored ndlp
* @phba: pointer to lpfc hba data structure.
* @prsp: pointer to response IOCB payload.
* @ndlp: pointer to a node-list data structure.
@@ -1165,7 +1165,7 @@ lpfc_plogi_confirm_nport(struct lpfc_hba *phba, uint32_t *prsp,
}
/**
- * lpfc_end_rscn: Check and handle more rscn for a vport.
+ * lpfc_end_rscn - Check and handle more rscn for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine checks whether more Registration State Change
@@ -1197,7 +1197,7 @@ lpfc_end_rscn(struct lpfc_vport *vport)
}
/**
- * lpfc_cmpl_els_plogi: Completion callback function for plogi.
+ * lpfc_cmpl_els_plogi - Completion callback function for plogi
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
@@ -1322,7 +1322,7 @@ out:
}
/**
- * lpfc_issue_els_plogi: Issue an plogi iocb command for a vport.
+ * lpfc_issue_els_plogi - Issue an plogi iocb command for a vport
* @vport: pointer to a host virtual N_Port data structure.
* @did: destination port identifier.
* @retry: number of retries to the command IOCB.
@@ -1401,7 +1401,7 @@ lpfc_issue_els_plogi(struct lpfc_vport *vport, uint32_t did, uint8_t retry)
}
/**
- * lpfc_cmpl_els_prli: Completion callback function for prli.
+ * lpfc_cmpl_els_prli - Completion callback function for prli
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
@@ -1472,7 +1472,7 @@ out:
}
/**
- * lpfc_issue_els_prli: Issue a prli iocb command for a vport.
+ * lpfc_issue_els_prli - Issue a prli iocb command for a vport
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
@@ -1562,7 +1562,7 @@ lpfc_issue_els_prli(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
}
/**
- * lpfc_rscn_disc: Perform rscn discovery for a vport.
+ * lpfc_rscn_disc - Perform rscn discovery for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine performs Registration State Change Notification (RSCN)
@@ -1588,7 +1588,7 @@ lpfc_rscn_disc(struct lpfc_vport *vport)
}
/**
- * lpfc_adisc_done: Complete the adisc phase of discovery.
+ * lpfc_adisc_done - Complete the adisc phase of discovery
* @vport: pointer to lpfc_vport hba data structure that finished all ADISCs.
*
* This function is called when the final ADISC is completed during discovery.
@@ -1639,7 +1639,7 @@ lpfc_adisc_done(struct lpfc_vport *vport)
}
/**
- * lpfc_more_adisc: Issue more adisc as needed.
+ * lpfc_more_adisc - Issue more adisc as needed
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine determines whether there are more ndlps on a @vport
@@ -1672,7 +1672,7 @@ lpfc_more_adisc(struct lpfc_vport *vport)
}
/**
- * lpfc_cmpl_els_adisc: Completion callback function for adisc.
+ * lpfc_cmpl_els_adisc - Completion callback function for adisc
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
@@ -1760,7 +1760,7 @@ out:
}
/**
- * lpfc_issue_els_adisc: Issue an address discover iocb to an node on a vport.
+ * lpfc_issue_els_adisc - Issue an address discover iocb to an node on a vport
* @vport: pointer to a virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
@@ -1833,7 +1833,7 @@ lpfc_issue_els_adisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
}
/**
- * lpfc_cmpl_els_logo: Completion callback function for logo.
+ * lpfc_cmpl_els_logo - Completion callback function for logo
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
@@ -1910,7 +1910,7 @@ out:
}
/**
- * lpfc_issue_els_logo: Issue a logo to an node on a vport.
+ * lpfc_issue_els_logo - Issue a logo to an node on a vport
* @vport: pointer to a virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
@@ -1991,7 +1991,7 @@ lpfc_issue_els_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
}
/**
- * lpfc_cmpl_els_cmd: Completion callback function for generic els command.
+ * lpfc_cmpl_els_cmd - Completion callback function for generic els command
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
@@ -2031,7 +2031,7 @@ lpfc_cmpl_els_cmd(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
}
/**
- * lpfc_issue_els_scr: Issue a scr to an node on a vport.
+ * lpfc_issue_els_scr - Issue a scr to an node on a vport
* @vport: pointer to a host virtual N_Port data structure.
* @nportid: N_Port identifier to the remote node.
* @retry: number of retries to the command IOCB.
@@ -2125,7 +2125,7 @@ lpfc_issue_els_scr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
}
/**
- * lpfc_issue_els_farpr: Issue a farp to an node on a vport.
+ * lpfc_issue_els_farpr - Issue a farp to an node on a vport
* @vport: pointer to a host virtual N_Port data structure.
* @nportid: N_Port identifier to the remote node.
* @retry: number of retries to the command IOCB.
@@ -2236,7 +2236,7 @@ lpfc_issue_els_farpr(struct lpfc_vport *vport, uint32_t nportid, uint8_t retry)
}
/**
- * lpfc_cancel_retry_delay_tmo: Cancel the timer with delayed iocb-cmd retry.
+ * lpfc_cancel_retry_delay_tmo - Cancel the timer with delayed iocb-cmd retry
* @vport: pointer to a host virtual N_Port data structure.
* @nlp: pointer to a node-list data structure.
*
@@ -2291,7 +2291,7 @@ lpfc_cancel_retry_delay_tmo(struct lpfc_vport *vport, struct lpfc_nodelist *nlp)
}
/**
- * lpfc_els_retry_delay: Timer function with a ndlp delayed function timer.
+ * lpfc_els_retry_delay - Timer function with a ndlp delayed function timer
* @ptr: holder for the pointer to the timer function associated data (ndlp).
*
* This routine is invoked by the ndlp delayed-function timer to check
@@ -2333,7 +2333,7 @@ lpfc_els_retry_delay(unsigned long ptr)
}
/**
- * lpfc_els_retry_delay_handler: Work thread handler for ndlp delayed function.
+ * lpfc_els_retry_delay_handler - Work thread handler for ndlp delayed function
* @ndlp: pointer to a node-list data structure.
*
* This routine is the worker-thread handler for processing the @ndlp delayed
@@ -2404,7 +2404,7 @@ lpfc_els_retry_delay_handler(struct lpfc_nodelist *ndlp)
}
/**
- * lpfc_els_retry: Make retry decision on an els command iocb.
+ * lpfc_els_retry - Make retry decision on an els command iocb
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
@@ -2732,7 +2732,7 @@ lpfc_els_retry(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
}
/**
- * lpfc_els_free_data: Free lpfc dma buffer and data structure with an iocb.
+ * lpfc_els_free_data - Free lpfc dma buffer and data structure with an iocb
* @phba: pointer to lpfc hba data structure.
* @buf_ptr1: pointer to the lpfc DMA buffer data structure.
*
@@ -2764,7 +2764,7 @@ lpfc_els_free_data(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr1)
}
/**
- * lpfc_els_free_bpl: Free lpfc dma buffer and data structure with bpl.
+ * lpfc_els_free_bpl - Free lpfc dma buffer and data structure with bpl
* @phba: pointer to lpfc hba data structure.
* @buf_ptr: pointer to the lpfc dma buffer data structure.
*
@@ -2784,7 +2784,7 @@ lpfc_els_free_bpl(struct lpfc_hba *phba, struct lpfc_dmabuf *buf_ptr)
}
/**
- * lpfc_els_free_iocb: Free a command iocb and its associated resources.
+ * lpfc_els_free_iocb - Free a command iocb and its associated resources
* @phba: pointer to lpfc hba data structure.
* @elsiocb: pointer to lpfc els command iocb data structure.
*
@@ -2877,7 +2877,7 @@ lpfc_els_free_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *elsiocb)
}
/**
- * lpfc_cmpl_els_logo_acc: Completion callback function to logo acc response.
+ * lpfc_cmpl_els_logo_acc - Completion callback function to logo acc response
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
@@ -2931,7 +2931,7 @@ lpfc_cmpl_els_logo_acc(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
}
/**
- * lpfc_mbx_cmpl_dflt_rpi: Completion callbk func for unreg dflt rpi mbox cmd.
+ * lpfc_mbx_cmpl_dflt_rpi - Completion callbk func for unreg dflt rpi mbox cmd
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
@@ -2965,7 +2965,7 @@ lpfc_mbx_cmpl_dflt_rpi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
}
/**
- * lpfc_cmpl_els_rsp: Completion callback function for els response iocb cmd.
+ * lpfc_cmpl_els_rsp - Completion callback function for els response iocb cmd
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
@@ -3136,7 +3136,7 @@ out:
}
/**
- * lpfc_els_rsp_acc: Prepare and issue an acc response iocb command.
+ * lpfc_els_rsp_acc - Prepare and issue an acc response iocb command
* @vport: pointer to a host virtual N_Port data structure.
* @flag: the els command code to be accepted.
* @oldiocb: pointer to the original lpfc command iocb data structure.
@@ -3275,7 +3275,7 @@ lpfc_els_rsp_acc(struct lpfc_vport *vport, uint32_t flag,
}
/**
- * lpfc_els_rsp_reject: Propare and issue a rjt response iocb command.
+ * lpfc_els_rsp_reject - Propare and issue a rjt response iocb command
* @vport: pointer to a virtual N_Port data structure.
* @rejectError:
* @oldiocb: pointer to the original lpfc command iocb data structure.
@@ -3356,7 +3356,7 @@ lpfc_els_rsp_reject(struct lpfc_vport *vport, uint32_t rejectError,
}
/**
- * lpfc_els_rsp_adisc_acc: Prepare and issue acc response to adisc iocb cmd.
+ * lpfc_els_rsp_adisc_acc - Prepare and issue acc response to adisc iocb cmd
* @vport: pointer to a virtual N_Port data structure.
* @oldiocb: pointer to the original lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
@@ -3431,7 +3431,7 @@ lpfc_els_rsp_adisc_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
}
/**
- * lpfc_els_rsp_prli_acc: Prepare and issue acc response to prli iocb cmd.
+ * lpfc_els_rsp_prli_acc - Prepare and issue acc response to prli iocb cmd
* @vport: pointer to a virtual N_Port data structure.
* @oldiocb: pointer to the original lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
@@ -3529,7 +3529,7 @@ lpfc_els_rsp_prli_acc(struct lpfc_vport *vport, struct lpfc_iocbq *oldiocb,
}
/**
- * lpfc_els_rsp_rnid_acc: Issue rnid acc response iocb command.
+ * lpfc_els_rsp_rnid_acc - Issue rnid acc response iocb command
* @vport: pointer to a virtual N_Port data structure.
* @format: rnid command format.
* @oldiocb: pointer to the original lpfc command iocb data structure.
@@ -3635,7 +3635,7 @@ lpfc_els_rsp_rnid_acc(struct lpfc_vport *vport, uint8_t format,
}
/**
- * lpfc_els_disc_adisc: Issue remaining adisc iocbs to npr nodes of a vport.
+ * lpfc_els_disc_adisc - Issue remaining adisc iocbs to npr nodes of a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues Address Discover (ADISC) ELS commands to those
@@ -3693,7 +3693,7 @@ lpfc_els_disc_adisc(struct lpfc_vport *vport)
}
/**
- * lpfc_els_disc_plogi: Issue plogi for all npr nodes of a vport before adisc.
+ * lpfc_els_disc_plogi - Issue plogi for all npr nodes of a vport before adisc
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine issues Port Login (PLOGI) ELS commands to all the N_Ports
@@ -3752,7 +3752,7 @@ lpfc_els_disc_plogi(struct lpfc_vport *vport)
}
/**
- * lpfc_els_flush_rscn: Clean up any rscn activities with a vport.
+ * lpfc_els_flush_rscn - Clean up any rscn activities with a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine cleans up any Registration State Change Notification
@@ -3791,7 +3791,7 @@ lpfc_els_flush_rscn(struct lpfc_vport *vport)
}
/**
- * lpfc_rscn_payload_check: Check whether there is a pending rscn to a did.
+ * lpfc_rscn_payload_check - Check whether there is a pending rscn to a did
* @vport: pointer to a host virtual N_Port data structure.
* @did: remote destination port identifier.
*
@@ -3866,7 +3866,7 @@ return_did_out:
}
/**
- * lpfc_rscn_recovery_check: Send recovery event to vport nodes matching rscn
+ * lpfc_rscn_recovery_check - Send recovery event to vport nodes matching rscn
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine sends recovery (NLP_EVT_DEVICE_RECOVERY) event to the
@@ -3895,7 +3895,7 @@ lpfc_rscn_recovery_check(struct lpfc_vport *vport)
}
/**
- * lpfc_send_rscn_event: Send an RSCN event to management application.
+ * lpfc_send_rscn_event - Send an RSCN event to management application
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
*
@@ -3938,7 +3938,7 @@ lpfc_send_rscn_event(struct lpfc_vport *vport,
}
/**
- * lpfc_els_rcv_rscn: Process an unsolicited rscn iocb.
+ * lpfc_els_rcv_rscn - Process an unsolicited rscn iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
@@ -4134,7 +4134,7 @@ lpfc_els_rcv_rscn(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
}
/**
- * lpfc_els_handle_rscn: Handle rscn for a vport.
+ * lpfc_els_handle_rscn - Handle rscn for a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine handles the Registration State Configuration Notification
@@ -4222,7 +4222,7 @@ lpfc_els_handle_rscn(struct lpfc_vport *vport)
}
/**
- * lpfc_els_rcv_flogi: Process an unsolicited flogi iocb.
+ * lpfc_els_rcv_flogi - Process an unsolicited flogi iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
@@ -4336,7 +4336,7 @@ lpfc_els_rcv_flogi(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
}
/**
- * lpfc_els_rcv_rnid: Process an unsolicited rnid iocb.
+ * lpfc_els_rcv_rnid - Process an unsolicited rnid iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
@@ -4391,7 +4391,7 @@ lpfc_els_rcv_rnid(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
}
/**
- * lpfc_els_rcv_lirr: Process an unsolicited lirr iocb.
+ * lpfc_els_rcv_lirr - Process an unsolicited lirr iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
@@ -4419,7 +4419,7 @@ lpfc_els_rcv_lirr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
}
/**
- * lpfc_els_rsp_rps_acc: Completion callbk func for MBX_READ_LNK_STAT mbox cmd.
+ * lpfc_els_rsp_rps_acc - Completion callbk func for MBX_READ_LNK_STAT mbox cmd
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
@@ -4513,7 +4513,7 @@ lpfc_els_rsp_rps_acc(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
}
/**
- * lpfc_els_rcv_rps: Process an unsolicited rps iocb.
+ * lpfc_els_rcv_rps - Process an unsolicited rps iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
@@ -4590,7 +4590,7 @@ reject_out:
}
/**
- * lpfc_els_rsp_rpl_acc: Issue an accept rpl els command.
+ * lpfc_els_rsp_rpl_acc - Issue an accept rpl els command
* @vport: pointer to a host virtual N_Port data structure.
* @cmdsize: size of the ELS command.
* @oldiocb: pointer to the original lpfc command iocb data structure.
@@ -4662,7 +4662,7 @@ lpfc_els_rsp_rpl_acc(struct lpfc_vport *vport, uint16_t cmdsize,
}
/**
- * lpfc_els_rcv_rpl: Process an unsolicited rpl iocb.
+ * lpfc_els_rcv_rpl - Process an unsolicited rpl iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
@@ -4721,7 +4721,7 @@ lpfc_els_rcv_rpl(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
}
/**
- * lpfc_els_rcv_farp: Process an unsolicited farp request els command.
+ * lpfc_els_rcv_farp - Process an unsolicited farp request els command
* @vport: pointer to a virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
@@ -4804,7 +4804,7 @@ lpfc_els_rcv_farp(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
}
/**
- * lpfc_els_rcv_farpr: Process an unsolicited farp response iocb.
+ * lpfc_els_rcv_farpr - Process an unsolicited farp response iocb
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @ndlp: pointer to a node-list data structure.
@@ -4842,7 +4842,7 @@ lpfc_els_rcv_farpr(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
}
/**
- * lpfc_els_rcv_fan: Process an unsolicited fan iocb command.
+ * lpfc_els_rcv_fan - Process an unsolicited fan iocb command
* @vport: pointer to a host virtual N_Port data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @fan_ndlp: pointer to a node-list data structure.
@@ -4890,7 +4890,7 @@ lpfc_els_rcv_fan(struct lpfc_vport *vport, struct lpfc_iocbq *cmdiocb,
}
/**
- * lpfc_els_timeout: Handler funciton to the els timer.
+ * lpfc_els_timeout - Handler funciton to the els timer
* @ptr: holder for the timer function associated data.
*
* This routine is invoked by the ELS timer after timeout. It posts the ELS
@@ -4919,7 +4919,7 @@ lpfc_els_timeout(unsigned long ptr)
}
/**
- * lpfc_els_timeout_handler: Process an els timeout event.
+ * lpfc_els_timeout_handler - Process an els timeout event
* @vport: pointer to a virtual N_Port data structure.
*
* This routine is the actual handler function that processes an ELS timeout
@@ -4994,7 +4994,7 @@ lpfc_els_timeout_handler(struct lpfc_vport *vport)
}
/**
- * lpfc_els_flush_cmd: Clean up the outstanding els commands to a vport.
+ * lpfc_els_flush_cmd - Clean up the outstanding els commands to a vport
* @vport: pointer to a host virtual N_Port data structure.
*
* This routine is used to clean up all the outstanding ELS commands on a
@@ -5058,25 +5058,15 @@ lpfc_els_flush_cmd(struct lpfc_vport *vport)
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- cmd = &piocb->iocb;
- list_del_init(&piocb->list);
-
- if (!piocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, piocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
- }
+ /* Cancell all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
return;
}
/**
- * lpfc_els_flush_all_cmd: Clean up all the outstanding els commands to a HBA.
+ * lpfc_els_flush_all_cmd - Clean up all the outstanding els commands to a HBA
* @phba: pointer to lpfc hba data structure.
*
* This routine is used to clean up all the outstanding ELS commands on a
@@ -5121,23 +5111,16 @@ lpfc_els_flush_all_cmd(struct lpfc_hba *phba)
lpfc_sli_issue_abort_iotag(phba, pring, piocb);
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- cmd = &piocb->iocb;
- list_del_init(&piocb->list);
- if (!piocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, piocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
- }
+
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
+
return;
}
/**
- * lpfc_send_els_failure_event: Posts an ELS command failure event.
+ * lpfc_send_els_failure_event - Posts an ELS command failure event
* @phba: Pointer to hba context object.
* @cmdiocbp: Pointer to command iocb which reported error.
* @rspiocbp: Pointer to response iocb which reported error.
@@ -5204,7 +5187,7 @@ lpfc_send_els_failure_event(struct lpfc_hba *phba,
}
/**
- * lpfc_send_els_event: Posts unsolicited els event.
+ * lpfc_send_els_event - Posts unsolicited els event
* @vport: Pointer to vport object.
* @ndlp: Pointer FC node object.
* @cmd: ELS command code.
@@ -5284,7 +5267,7 @@ lpfc_send_els_event(struct lpfc_vport *vport,
/**
- * lpfc_els_unsol_buffer: Process an unsolicited event data buffer.
+ * lpfc_els_unsol_buffer - Process an unsolicited event data buffer
* @phba: pointer to lpfc hba data structure.
* @pring: pointer to a SLI ring.
* @vport: pointer to a host virtual N_Port data structure.
@@ -5592,7 +5575,7 @@ dropit:
}
/**
- * lpfc_find_vport_by_vpid: Find a vport on a HBA through vport identifier.
+ * lpfc_find_vport_by_vpid - Find a vport on a HBA through vport identifier
* @phba: pointer to lpfc hba data structure.
* @vpi: host virtual N_Port identifier.
*
@@ -5622,7 +5605,7 @@ lpfc_find_vport_by_vpid(struct lpfc_hba *phba, uint16_t vpi)
}
/**
- * lpfc_els_unsol_event: Process an unsolicited event from an els sli ring.
+ * lpfc_els_unsol_event - Process an unsolicited event from an els sli ring
* @phba: pointer to lpfc hba data structure.
* @pring: pointer to a SLI ring.
* @elsiocb: pointer to lpfc els iocb data structure.
@@ -5710,7 +5693,7 @@ lpfc_els_unsol_event(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
}
/**
- * lpfc_do_scr_ns_plogi: Issue a plogi to the name server for scr.
+ * lpfc_do_scr_ns_plogi - Issue a plogi to the name server for scr
* @phba: pointer to lpfc hba data structure.
* @vport: pointer to a virtual N_Port data structure.
*
@@ -5781,7 +5764,7 @@ lpfc_do_scr_ns_plogi(struct lpfc_hba *phba, struct lpfc_vport *vport)
}
/**
- * lpfc_cmpl_reg_new_vport: Completion callback function to register new vport.
+ * lpfc_cmpl_reg_new_vport - Completion callback function to register new vport
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
@@ -5850,7 +5833,7 @@ lpfc_cmpl_reg_new_vport(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
}
/**
- * lpfc_register_new_vport: Register a new vport with a HBA.
+ * lpfc_register_new_vport - Register a new vport with a HBA
* @phba: pointer to lpfc hba data structure.
* @vport: pointer to a host virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
@@ -5899,7 +5882,7 @@ mbox_err_exit:
}
/**
- * lpfc_cmpl_els_fdisc: Completion function for fdisc iocb command.
+ * lpfc_cmpl_els_fdisc - Completion function for fdisc iocb command
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
@@ -6007,7 +5990,7 @@ out:
}
/**
- * lpfc_issue_els_fdisc: Issue a fdisc iocb command.
+ * lpfc_issue_els_fdisc - Issue a fdisc iocb command
* @vport: pointer to a virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
* @retry: number of retries to the command IOCB.
@@ -6101,7 +6084,7 @@ lpfc_issue_els_fdisc(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
}
/**
- * lpfc_cmpl_els_npiv_logo: Completion function with vport logo.
+ * lpfc_cmpl_els_npiv_logo - Completion function with vport logo
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
@@ -6136,7 +6119,7 @@ lpfc_cmpl_els_npiv_logo(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
}
/**
- * lpfc_issue_els_npiv_logo: Issue a logo off a vport.
+ * lpfc_issue_els_npiv_logo - Issue a logo off a vport
* @vport: pointer to a virtual N_Port data structure.
* @ndlp: pointer to a node-list data structure.
*
@@ -6197,7 +6180,7 @@ lpfc_issue_els_npiv_logo(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
}
/**
- * lpfc_fabric_block_timeout: Handler function to the fabric block timer.
+ * lpfc_fabric_block_timeout - Handler function to the fabric block timer
* @ptr: holder for the timer function associated data.
*
* This routine is invoked by the fabric iocb block timer after
@@ -6226,7 +6209,7 @@ lpfc_fabric_block_timeout(unsigned long ptr)
}
/**
- * lpfc_resume_fabric_iocbs: Issue a fabric iocb from driver internal list.
+ * lpfc_resume_fabric_iocbs - Issue a fabric iocb from driver internal list
* @phba: pointer to lpfc hba data structure.
*
* This routine issues one fabric iocb from the driver internal list to
@@ -6285,7 +6268,7 @@ repeat:
}
/**
- * lpfc_unblock_fabric_iocbs: Unblock issuing fabric iocb command.
+ * lpfc_unblock_fabric_iocbs - Unblock issuing fabric iocb command
* @phba: pointer to lpfc hba data structure.
*
* This routine unblocks the issuing fabric iocb command. The function
@@ -6303,7 +6286,7 @@ lpfc_unblock_fabric_iocbs(struct lpfc_hba *phba)
}
/**
- * lpfc_block_fabric_iocbs: Block issuing fabric iocb command.
+ * lpfc_block_fabric_iocbs - Block issuing fabric iocb command
* @phba: pointer to lpfc hba data structure.
*
* This routine blocks the issuing fabric iocb for a specified amount of
@@ -6325,7 +6308,7 @@ lpfc_block_fabric_iocbs(struct lpfc_hba *phba)
}
/**
- * lpfc_cmpl_fabric_iocb: Completion callback function for fabric iocb.
+ * lpfc_cmpl_fabric_iocb - Completion callback function for fabric iocb
* @phba: pointer to lpfc hba data structure.
* @cmdiocb: pointer to lpfc command iocb data structure.
* @rspiocb: pointer to lpfc response iocb data structure.
@@ -6384,7 +6367,7 @@ lpfc_cmpl_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
}
/**
- * lpfc_issue_fabric_iocb: Issue a fabric iocb command.
+ * lpfc_issue_fabric_iocb - Issue a fabric iocb command
* @phba: pointer to lpfc hba data structure.
* @iocb: pointer to lpfc command iocb data structure.
*
@@ -6453,7 +6436,7 @@ lpfc_issue_fabric_iocb(struct lpfc_hba *phba, struct lpfc_iocbq *iocb)
}
/**
- * lpfc_fabric_abort_vport: Abort a vport's iocbs from driver fabric iocb list.
+ * lpfc_fabric_abort_vport - Abort a vport's iocbs from driver fabric iocb list
* @vport: pointer to a virtual N_Port data structure.
*
* This routine aborts all the IOCBs associated with a @vport from the
@@ -6468,7 +6451,6 @@ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport)
LIST_HEAD(completions);
struct lpfc_hba *phba = vport->phba;
struct lpfc_iocbq *tmp_iocb, *piocb;
- IOCB_t *cmd;
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list,
@@ -6481,19 +6463,13 @@ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport)
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&piocb->list);
-
- cmd = &piocb->iocb;
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
/**
- * lpfc_fabric_abort_nport: Abort a ndlp's iocbs from driver fabric iocb list.
+ * lpfc_fabric_abort_nport - Abort a ndlp's iocbs from driver fabric iocb list
* @ndlp: pointer to a node-list data structure.
*
* This routine aborts all the IOCBs associated with an @ndlp from the
@@ -6506,10 +6482,9 @@ static void lpfc_fabric_abort_vport(struct lpfc_vport *vport)
void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp)
{
LIST_HEAD(completions);
- struct lpfc_hba *phba = ndlp->vport->phba;
+ struct lpfc_hba *phba = ndlp->phba;
struct lpfc_iocbq *tmp_iocb, *piocb;
struct lpfc_sli_ring *pring = &phba->sli.ring[LPFC_ELS_RING];
- IOCB_t *cmd;
spin_lock_irq(&phba->hbalock);
list_for_each_entry_safe(piocb, tmp_iocb, &phba->fabric_iocb_list,
@@ -6521,19 +6496,13 @@ void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp)
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&piocb->list);
-
- cmd = &piocb->iocb;
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
/**
- * lpfc_fabric_abort_hba: Abort all iocbs on driver fabric iocb list.
+ * lpfc_fabric_abort_hba - Abort all iocbs on driver fabric iocb list
* @phba: pointer to lpfc hba data structure.
*
* This routine aborts all the IOCBs currently on the driver internal
@@ -6546,20 +6515,12 @@ void lpfc_fabric_abort_nport(struct lpfc_nodelist *ndlp)
void lpfc_fabric_abort_hba(struct lpfc_hba *phba)
{
LIST_HEAD(completions);
- struct lpfc_iocbq *piocb;
- IOCB_t *cmd;
spin_lock_irq(&phba->hbalock);
list_splice_init(&phba->fabric_iocb_list, &completions);
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- piocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&piocb->list);
-
- cmd = &piocb->iocb;
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (piocb->iocb_cmpl) (phba, piocb, piocb);
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
diff --git a/drivers/scsi/lpfc/lpfc_hbadisc.c b/drivers/scsi/lpfc/lpfc_hbadisc.c
index 311ed6dea72..e764ce0bf70 100644
--- a/drivers/scsi/lpfc/lpfc_hbadisc.c
+++ b/drivers/scsi/lpfc/lpfc_hbadisc.c
@@ -78,7 +78,7 @@ lpfc_terminate_rport_io(struct fc_rport *rport)
return;
}
- phba = ndlp->vport->phba;
+ phba = ndlp->phba;
lpfc_debugfs_disc_trc(ndlp->vport, LPFC_DISC_TRC_RPORT,
"rport terminate: sid:x%x did:x%x flg:x%x",
@@ -276,7 +276,7 @@ lpfc_dev_loss_tmo_handler(struct lpfc_nodelist *ndlp)
}
/**
- * lpfc_alloc_fast_evt: Allocates data structure for posting event.
+ * lpfc_alloc_fast_evt - Allocates data structure for posting event
* @phba: Pointer to hba context object.
*
* This function is called from the functions which need to post
@@ -303,7 +303,7 @@ lpfc_alloc_fast_evt(struct lpfc_hba *phba) {
}
/**
- * lpfc_free_fast_evt: Frees event data structure.
+ * lpfc_free_fast_evt - Frees event data structure
* @phba: Pointer to hba context object.
* @evt: Event object which need to be freed.
*
@@ -319,7 +319,7 @@ lpfc_free_fast_evt(struct lpfc_hba *phba,
}
/**
- * lpfc_send_fastpath_evt: Posts events generated from fast path.
+ * lpfc_send_fastpath_evt - Posts events generated from fast path
* @phba: Pointer to hba context object.
* @evtp: Event data structure.
*
@@ -1858,13 +1858,18 @@ lpfc_disable_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp)
NLP_STE_UNUSED_NODE);
}
/**
- * lpfc_initialize_node: Initialize all fields of node object.
+ * lpfc_initialize_node - Initialize all fields of node object
* @vport: Pointer to Virtual Port object.
* @ndlp: Pointer to FC node object.
* @did: FC_ID of the node.
- * This function is always called when node object need to
- * be initialized. It initializes all the fields of the node
- * object.
+ *
+ * This function is always called when node object need to be initialized.
+ * It initializes all the fields of the node object. Although the reference
+ * to phba from @ndlp can be obtained indirectly through it's reference to
+ * @vport, a direct reference to phba is taken here by @ndlp. This is due
+ * to the life-span of the @ndlp might go beyond the existence of @vport as
+ * the final release of ndlp is determined by its reference count. And, the
+ * operation on @ndlp needs the reference to phba.
**/
static inline void
lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
@@ -1877,6 +1882,7 @@ lpfc_initialize_node(struct lpfc_vport *vport, struct lpfc_nodelist *ndlp,
ndlp->nlp_delayfunc.data = (unsigned long)ndlp;
ndlp->nlp_DID = did;
ndlp->vport = vport;
+ ndlp->phba = vport->phba;
ndlp->nlp_sid = NLP_NO_SID;
kref_init(&ndlp->kref);
NLP_INT_NODE_ACT(ndlp);
@@ -2086,7 +2092,6 @@ lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
struct lpfc_sli *psli;
struct lpfc_sli_ring *pring;
struct lpfc_iocbq *iocb, *next_iocb;
- IOCB_t *icmd;
uint32_t rpi, i;
lpfc_fabric_abort_nport(ndlp);
@@ -2122,19 +2127,9 @@ lpfc_no_rpi(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
}
}
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- icmd = &iocb->iocb;
- icmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- icmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl)(phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
return 0;
}
@@ -2186,9 +2181,13 @@ lpfc_unreg_all_rpis(struct lpfc_vport *vport)
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
mbox->context1 = NULL;
rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
- if (rc == MBX_NOT_FINISHED) {
+ if (rc != MBX_TIMEOUT)
mempool_free(mbox, phba->mbox_mem_pool);
- }
+
+ if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED))
+ lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT,
+ "1836 Could not issue "
+ "unreg_login(all_rpis) status %d\n", rc);
}
}
@@ -2206,12 +2205,14 @@ lpfc_unreg_default_rpis(struct lpfc_vport *vport)
mbox->mbox_cmpl = lpfc_sli_def_mbox_cmpl;
mbox->context1 = NULL;
rc = lpfc_sli_issue_mbox_wait(phba, mbox, LPFC_MBOX_TMO);
- if (rc == MBX_NOT_FINISHED) {
+ if (rc != MBX_TIMEOUT)
+ mempool_free(mbox, phba->mbox_mem_pool);
+
+ if ((rc == MBX_TIMEOUT) || (rc == MBX_NOT_FINISHED))
lpfc_printf_vlog(vport, KERN_ERR, LOG_MBOX | LOG_VPORT,
"1815 Could not issue "
- "unreg_did (default rpis)\n");
- mempool_free(mbox, phba->mbox_mem_pool);
- }
+ "unreg_did (default rpis) status %d\n",
+ rc);
}
}
@@ -2470,14 +2471,13 @@ lpfc_setup_disc_node(struct lpfc_vport *vport, uint32_t did)
if (ndlp->nlp_flag & NLP_RCV_PLOGI)
return NULL;
- spin_lock_irq(shost->host_lock);
- ndlp->nlp_flag |= NLP_NPR_2B_DISC;
- spin_unlock_irq(shost->host_lock);
-
/* Since this node is marked for discovery,
* delay timeout is not needed.
*/
lpfc_cancel_retry_delay_tmo(vport, ndlp);
+ spin_lock_irq(shost->host_lock);
+ ndlp->nlp_flag |= NLP_NPR_2B_DISC;
+ spin_unlock_irq(shost->host_lock);
} else
ndlp = NULL;
} else {
@@ -2740,19 +2740,9 @@ lpfc_free_tx(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq, list);
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- icmd = &iocb->iocb;
- icmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- icmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
static void
@@ -3173,7 +3163,7 @@ lpfc_nlp_release(struct kref *kref)
lpfc_nlp_remove(ndlp->vport, ndlp);
/* clear the ndlp active flag for all release cases */
- phba = ndlp->vport->phba;
+ phba = ndlp->phba;
spin_lock_irqsave(&phba->ndlp_lock, flags);
NLP_CLR_NODE_ACT(ndlp);
spin_unlock_irqrestore(&phba->ndlp_lock, flags);
@@ -3181,7 +3171,7 @@ lpfc_nlp_release(struct kref *kref)
/* free ndlp memory for final ndlp release */
if (NLP_CHK_FREE_REQ(ndlp)) {
kfree(ndlp->lat_data);
- mempool_free(ndlp, ndlp->vport->phba->nlp_mem_pool);
+ mempool_free(ndlp, ndlp->phba->nlp_mem_pool);
}
}
@@ -3204,7 +3194,7 @@ lpfc_nlp_get(struct lpfc_nodelist *ndlp)
* ndlp reference count that is in the process of being
* released.
*/
- phba = ndlp->vport->phba;
+ phba = ndlp->phba;
spin_lock_irqsave(&phba->ndlp_lock, flags);
if (!NLP_CHK_NODE_ACT(ndlp) || NLP_CHK_FREE_ACK(ndlp)) {
spin_unlock_irqrestore(&phba->ndlp_lock, flags);
@@ -3240,7 +3230,7 @@ lpfc_nlp_put(struct lpfc_nodelist *ndlp)
"node put: did:x%x flg:x%x refcnt:x%x",
ndlp->nlp_DID, ndlp->nlp_flag,
atomic_read(&ndlp->kref.refcount));
- phba = ndlp->vport->phba;
+ phba = ndlp->phba;
spin_lock_irqsave(&phba->ndlp_lock, flags);
/* Check the ndlp memory free acknowledge flag to avoid the
* possible race condition that kref_put got invoked again
diff --git a/drivers/scsi/lpfc/lpfc_init.c b/drivers/scsi/lpfc/lpfc_init.c
index 06874e6009e..86d1bdcbf2d 100644
--- a/drivers/scsi/lpfc/lpfc_init.c
+++ b/drivers/scsi/lpfc/lpfc_init.c
@@ -60,7 +60,7 @@ static struct scsi_transport_template *lpfc_vport_transport_template = NULL;
static DEFINE_IDR(lpfc_hba_index);
/**
- * lpfc_config_port_prep: Perform lpfc initialization prior to config port.
+ * lpfc_config_port_prep - Perform lpfc initialization prior to config port
* @phba: pointer to lpfc hba data structure.
*
* This routine will do LPFC initialization prior to issuing the CONFIG_PORT
@@ -221,7 +221,7 @@ out_free_mbox:
}
/**
- * lpfc_config_async_cmpl: Completion handler for config async event mbox cmd.
+ * lpfc_config_async_cmpl - Completion handler for config async event mbox cmd
* @phba: pointer to lpfc hba data structure.
* @pmboxq: pointer to the driver internal queue element for mailbox command.
*
@@ -242,8 +242,7 @@ lpfc_config_async_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
}
/**
- * lpfc_dump_wakeup_param_cmpl: Completion handler for dump memory mailbox
- * command used for getting wake up parameters.
+ * lpfc_dump_wakeup_param_cmpl - dump memory mailbox command completion handler
* @phba: pointer to lpfc hba data structure.
* @pmboxq: pointer to the driver internal queue element for mailbox command.
*
@@ -287,7 +286,7 @@ lpfc_dump_wakeup_param_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
}
/**
- * lpfc_config_port_post: Perform lpfc initialization after config port.
+ * lpfc_config_port_post - Perform lpfc initialization after config port
* @phba: pointer to lpfc hba data structure.
*
* This routine will do LPFC initialization after the CONFIG_PORT mailbox
@@ -303,6 +302,7 @@ int
lpfc_config_port_post(struct lpfc_hba *phba)
{
struct lpfc_vport *vport = phba->pport;
+ struct Scsi_Host *shost = lpfc_shost_from_vport(vport);
LPFC_MBOXQ_t *pmb;
MAILBOX_t *mb;
struct lpfc_dmabuf *mp;
@@ -360,6 +360,11 @@ lpfc_config_port_post(struct lpfc_hba *phba)
sizeof (struct lpfc_name));
memcpy(&vport->fc_portname, &vport->fc_sparam.portName,
sizeof (struct lpfc_name));
+
+ /* Update the fc_host data structures with new wwn. */
+ fc_host_node_name(shost) = wwn_to_u64(vport->fc_nodename.u.wwn);
+ fc_host_port_name(shost) = wwn_to_u64(vport->fc_portname.u.wwn);
+
/* If no serial number in VPD data, use low 6 bytes of WWNN */
/* This should be consolidated into parse_vpd ? - mr */
if (phba->SerialNumber[0] == 0) {
@@ -551,7 +556,7 @@ lpfc_config_port_post(struct lpfc_hba *phba)
}
/**
- * lpfc_hba_down_prep: Perform lpfc uninitialization prior to HBA reset.
+ * lpfc_hba_down_prep - Perform lpfc uninitialization prior to HBA reset
* @phba: pointer to lpfc HBA data structure.
*
* This routine will do LPFC uninitialization before the HBA is reset when
@@ -583,7 +588,7 @@ lpfc_hba_down_prep(struct lpfc_hba *phba)
}
/**
- * lpfc_hba_down_post: Perform lpfc uninitialization after HBA reset.
+ * lpfc_hba_down_post - Perform lpfc uninitialization after HBA reset
* @phba: pointer to lpfc HBA data structure.
*
* This routine will do uninitialization after the HBA is reset when bring
@@ -599,8 +604,6 @@ lpfc_hba_down_post(struct lpfc_hba *phba)
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
struct lpfc_dmabuf *mp, *next_mp;
- struct lpfc_iocbq *iocb;
- IOCB_t *cmd = NULL;
LIST_HEAD(completions);
int i;
@@ -628,20 +631,9 @@ lpfc_hba_down_post(struct lpfc_hba *phba)
pring->txcmplq_cnt = 0;
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq,
- list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
lpfc_sli_abort_iocb_ring(phba, pring);
spin_lock_irq(&phba->hbalock);
@@ -652,7 +644,7 @@ lpfc_hba_down_post(struct lpfc_hba *phba)
}
/**
- * lpfc_hb_timeout: The HBA-timer timeout handler.
+ * lpfc_hb_timeout - The HBA-timer timeout handler
* @ptr: unsigned long holds the pointer to lpfc hba data structure.
*
* This is the HBA-timer timeout handler registered to the lpfc driver. When
@@ -686,7 +678,7 @@ lpfc_hb_timeout(unsigned long ptr)
}
/**
- * lpfc_hb_mbox_cmpl: The lpfc heart-beat mailbox command callback function.
+ * lpfc_hb_mbox_cmpl - The lpfc heart-beat mailbox command callback function
* @phba: pointer to lpfc hba data structure.
* @pmboxq: pointer to the driver internal queue element for mailbox command.
*
@@ -721,7 +713,7 @@ lpfc_hb_mbox_cmpl(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmboxq)
}
/**
- * lpfc_hb_timeout_handler: The HBA-timer timeout handler.
+ * lpfc_hb_timeout_handler - The HBA-timer timeout handler
* @phba: pointer to lpfc hba data structure.
*
* This is the actual HBA-timer timeout handler to be invoked by the worker
@@ -830,7 +822,7 @@ lpfc_hb_timeout_handler(struct lpfc_hba *phba)
}
/**
- * lpfc_offline_eratt: Bring lpfc offline on hardware error attention.
+ * lpfc_offline_eratt - Bring lpfc offline on hardware error attention
* @phba: pointer to lpfc hba data structure.
*
* This routine is called to bring the HBA offline when HBA hardware error
@@ -857,7 +849,73 @@ lpfc_offline_eratt(struct lpfc_hba *phba)
}
/**
- * lpfc_handle_eratt: The HBA hardware error handler.
+ * lpfc_handle_deferred_eratt - The HBA hardware deferred error handler
+ * @phba: pointer to lpfc hba data structure.
+ *
+ * This routine is invoked to handle the deferred HBA hardware error
+ * conditions. This type of error is indicated by HBA by setting ER1
+ * and another ER bit in the host status register. The driver will
+ * wait until the ER1 bit clears before handling the error condition.
+ **/
+static void
+lpfc_handle_deferred_eratt(struct lpfc_hba *phba)
+{
+ uint32_t old_host_status = phba->work_hs;
+ struct lpfc_sli_ring *pring;
+ struct lpfc_sli *psli = &phba->sli;
+
+ lpfc_printf_log(phba, KERN_ERR, LOG_INIT,
+ "0479 Deferred Adapter Hardware Error "
+ "Data: x%x x%x x%x\n",
+ phba->work_hs,
+ phba->work_status[0], phba->work_status[1]);
+
+ spin_lock_irq(&phba->hbalock);
+ psli->sli_flag &= ~LPFC_SLI2_ACTIVE;
+ spin_unlock_irq(&phba->hbalock);
+
+
+ /*
+ * Firmware stops when it triggred erratt. That could cause the I/Os
+ * dropped by the firmware. Error iocb (I/O) on txcmplq and let the
+ * SCSI layer retry it after re-establishing link.
+ */
+ pring = &psli->ring[psli->fcp_ring];
+ lpfc_sli_abort_iocb_ring(phba, pring);
+
+ /*
+ * There was a firmware error. Take the hba offline and then
+ * attempt to restart it.
+ */
+ lpfc_offline_prep(phba);
+ lpfc_offline(phba);
+
+ /* Wait for the ER1 bit to clear.*/
+ while (phba->work_hs & HS_FFER1) {
+ msleep(100);
+ phba->work_hs = readl(phba->HSregaddr);
+ /* If driver is unloading let the worker thread continue */
+ if (phba->pport->load_flag & FC_UNLOADING) {
+ phba->work_hs = 0;
+ break;
+ }
+ }
+
+ /*
+ * This is to ptrotect against a race condition in which
+ * first write to the host attention register clear the
+ * host status register.
+ */
+ if ((!phba->work_hs) && (!(phba->pport->load_flag & FC_UNLOADING)))
+ phba->work_hs = old_host_status & ~HS_FFER1;
+
+ phba->hba_flag &= ~DEFER_ERATT;
+ phba->work_status[0] = readl(phba->MBslimaddr + 0xa8);
+ phba->work_status[1] = readl(phba->MBslimaddr + 0xac);
+}
+
+/**
+ * lpfc_handle_eratt - The HBA hardware error handler
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to handle the following HBA hardware error
@@ -895,6 +953,9 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
(char *) &board_event,
LPFC_NL_VENDOR_ID);
+ if (phba->hba_flag & DEFER_ERATT)
+ lpfc_handle_deferred_eratt(phba);
+
if (phba->work_hs & HS_FFER6) {
/* Re-establishing Link */
lpfc_printf_log(phba, KERN_INFO, LOG_LINK_EVENT,
@@ -976,7 +1037,7 @@ lpfc_handle_eratt(struct lpfc_hba *phba)
}
/**
- * lpfc_handle_latt: The HBA link event handler.
+ * lpfc_handle_latt - The HBA link event handler
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked from the worker thread to handle a HBA host
@@ -1063,7 +1124,7 @@ lpfc_handle_latt_err_exit:
}
/**
- * lpfc_parse_vpd: Parse VPD (Vital Product Data).
+ * lpfc_parse_vpd - Parse VPD (Vital Product Data)
* @phba: pointer to lpfc hba data structure.
* @vpd: pointer to the vital product data.
* @len: length of the vital product data in bytes.
@@ -1213,7 +1274,7 @@ lpfc_parse_vpd(struct lpfc_hba *phba, uint8_t *vpd, int len)
}
/**
- * lpfc_get_hba_model_desc: Retrieve HBA device model name and description.
+ * lpfc_get_hba_model_desc - Retrieve HBA device model name and description
* @phba: pointer to lpfc hba data structure.
* @mdp: pointer to the data structure to hold the derived model name.
* @descp: pointer to the data structure to hold the derived description.
@@ -1322,7 +1383,8 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
m = (typeof(m)){"LPe11000", max_speed, "PCIe"};
break;
case PCI_DEVICE_ID_ZEPHYR_DCSP:
- m = (typeof(m)){"LPe11002-SP", max_speed, "PCIe"};
+ m = (typeof(m)){"LP2105", max_speed, "PCIe"};
+ GE = 1;
break;
case PCI_DEVICE_ID_ZMID:
m = (typeof(m)){"LPe1150", max_speed, "PCIe"};
@@ -1392,7 +1454,7 @@ lpfc_get_hba_model_desc(struct lpfc_hba *phba, uint8_t *mdp, uint8_t *descp)
}
/**
- * lpfc_post_buffer: Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring.
+ * lpfc_post_buffer - Post IOCB(s) with DMA buffer descriptor(s) to a IOCB ring
* @phba: pointer to lpfc hba data structure.
* @pring: pointer to a IOCB ring.
* @cnt: the number of IOCBs to be posted to the IOCB ring.
@@ -1493,7 +1555,7 @@ lpfc_post_buffer(struct lpfc_hba *phba, struct lpfc_sli_ring *pring, int cnt)
}
/**
- * lpfc_post_rcv_buf: Post the initial receive IOCB buffers to ELS ring.
+ * lpfc_post_rcv_buf - Post the initial receive IOCB buffers to ELS ring
* @phba: pointer to lpfc hba data structure.
*
* This routine posts initial receive IOCB buffers to the ELS ring. The
@@ -1518,7 +1580,7 @@ lpfc_post_rcv_buf(struct lpfc_hba *phba)
#define S(N,V) (((V)<<(N))|((V)>>(32-(N))))
/**
- * lpfc_sha_init: Set up initial array of hash table entries.
+ * lpfc_sha_init - Set up initial array of hash table entries
* @HashResultPointer: pointer to an array as hash table.
*
* This routine sets up the initial values to the array of hash table entries
@@ -1535,7 +1597,7 @@ lpfc_sha_init(uint32_t * HashResultPointer)
}
/**
- * lpfc_sha_iterate: Iterate initial hash table with the working hash table.
+ * lpfc_sha_iterate - Iterate initial hash table with the working hash table
* @HashResultPointer: pointer to an initial/result hash table.
* @HashWorkingPointer: pointer to an working hash table.
*
@@ -1592,7 +1654,7 @@ lpfc_sha_iterate(uint32_t * HashResultPointer, uint32_t * HashWorkingPointer)
}
/**
- * lpfc_challenge_key: Create challenge key based on WWPN of the HBA.
+ * lpfc_challenge_key - Create challenge key based on WWPN of the HBA
* @RandomChallenge: pointer to the entry of host challenge random number array.
* @HashWorking: pointer to the entry of the working hash array.
*
@@ -1608,7 +1670,7 @@ lpfc_challenge_key(uint32_t * RandomChallenge, uint32_t * HashWorking)
}
/**
- * lpfc_hba_init: Perform special handling for LC HBA initialization.
+ * lpfc_hba_init - Perform special handling for LC HBA initialization
* @phba: pointer to lpfc hba data structure.
* @hbainit: pointer to an array of unsigned 32-bit integers.
*
@@ -1637,7 +1699,7 @@ lpfc_hba_init(struct lpfc_hba *phba, uint32_t *hbainit)
}
/**
- * lpfc_cleanup: Performs vport cleanups before deleting a vport.
+ * lpfc_cleanup - Performs vport cleanups before deleting a vport
* @vport: pointer to a virtual N_Port data structure.
*
* This routine performs the necessary cleanups before deleting the @vport.
@@ -1724,7 +1786,7 @@ lpfc_cleanup(struct lpfc_vport *vport)
}
/**
- * lpfc_stop_vport_timers: Stop all the timers associated with a vport.
+ * lpfc_stop_vport_timers - Stop all the timers associated with a vport
* @vport: pointer to a virtual N_Port data structure.
*
* This routine stops all the timers associated with a @vport. This function
@@ -1741,7 +1803,7 @@ lpfc_stop_vport_timers(struct lpfc_vport *vport)
}
/**
- * lpfc_stop_phba_timers: Stop all the timers associated with an HBA.
+ * lpfc_stop_phba_timers - Stop all the timers associated with an HBA
* @phba: pointer to lpfc hba data structure.
*
* This routine stops all the timers associated with a HBA. This function is
@@ -1761,7 +1823,7 @@ lpfc_stop_phba_timers(struct lpfc_hba *phba)
}
/**
- * lpfc_block_mgmt_io: Mark a HBA's management interface as blocked.
+ * lpfc_block_mgmt_io - Mark a HBA's management interface as blocked
* @phba: pointer to lpfc hba data structure.
*
* This routine marks a HBA's management interface as blocked. Once the HBA's
@@ -1781,7 +1843,7 @@ lpfc_block_mgmt_io(struct lpfc_hba * phba)
}
/**
- * lpfc_online: Initialize and bring a HBA online.
+ * lpfc_online - Initialize and bring a HBA online
* @phba: pointer to lpfc hba data structure.
*
* This routine initializes the HBA and brings a HBA online. During this
@@ -1839,7 +1901,7 @@ lpfc_online(struct lpfc_hba *phba)
}
/**
- * lpfc_unblock_mgmt_io: Mark a HBA's management interface to be not blocked.
+ * lpfc_unblock_mgmt_io - Mark a HBA's management interface to be not blocked
* @phba: pointer to lpfc hba data structure.
*
* This routine marks a HBA's management interface as not blocked. Once the
@@ -1860,7 +1922,7 @@ lpfc_unblock_mgmt_io(struct lpfc_hba * phba)
}
/**
- * lpfc_offline_prep: Prepare a HBA to be brought offline.
+ * lpfc_offline_prep - Prepare a HBA to be brought offline
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to prepare a HBA to be brought offline. It performs
@@ -1917,7 +1979,7 @@ lpfc_offline_prep(struct lpfc_hba * phba)
}
/**
- * lpfc_offline: Bring a HBA offline.
+ * lpfc_offline - Bring a HBA offline
* @phba: pointer to lpfc hba data structure.
*
* This routine actually brings a HBA offline. It stops all the timers
@@ -1962,7 +2024,7 @@ lpfc_offline(struct lpfc_hba *phba)
}
/**
- * lpfc_scsi_free: Free all the SCSI buffers and IOCBs from driver lists.
+ * lpfc_scsi_free - Free all the SCSI buffers and IOCBs from driver lists
* @phba: pointer to lpfc hba data structure.
*
* This routine is to free all the SCSI buffers and IOCBs from the driver
@@ -2001,7 +2063,7 @@ lpfc_scsi_free(struct lpfc_hba *phba)
}
/**
- * lpfc_create_port: Create an FC port.
+ * lpfc_create_port - Create an FC port
* @phba: pointer to lpfc hba data structure.
* @instance: a unique integer ID to this FC port.
* @dev: pointer to the device data structure.
@@ -2091,7 +2153,7 @@ out:
}
/**
- * destroy_port: Destroy an FC port.
+ * destroy_port - destroy an FC port
* @vport: pointer to an lpfc virtual N_Port data structure.
*
* This routine destroys a FC port from the upper layer protocol. All the
@@ -2116,7 +2178,7 @@ destroy_port(struct lpfc_vport *vport)
}
/**
- * lpfc_get_instance: Get a unique integer ID.
+ * lpfc_get_instance - Get a unique integer ID
*
* This routine allocates a unique integer ID from lpfc_hba_index pool. It
* uses the kernel idr facility to perform the task.
@@ -2139,7 +2201,7 @@ lpfc_get_instance(void)
}
/**
- * lpfc_scan_finished: method for SCSI layer to detect whether scan is done.
+ * lpfc_scan_finished - method for SCSI layer to detect whether scan is done
* @shost: pointer to SCSI host data structure.
* @time: elapsed time of the scan in jiffies.
*
@@ -2197,7 +2259,7 @@ finished:
}
/**
- * lpfc_host_attrib_init: Initialize SCSI host attributes on a FC port.
+ * lpfc_host_attrib_init - Initialize SCSI host attributes on a FC port
* @shost: pointer to SCSI host data structure.
*
* This routine initializes a given SCSI host attributes on a FC port. The
@@ -2252,7 +2314,7 @@ void lpfc_host_attrib_init(struct Scsi_Host *shost)
}
/**
- * lpfc_enable_msix: Enable MSI-X interrupt mode.
+ * lpfc_enable_msix - Enable MSI-X interrupt mode
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI-X interrupt vectors. The kernel
@@ -2366,7 +2428,7 @@ msi_fail_out:
}
/**
- * lpfc_disable_msix: Disable MSI-X interrupt mode.
+ * lpfc_disable_msix - Disable MSI-X interrupt mode
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to release the MSI-X vectors and then disable the
@@ -2385,7 +2447,7 @@ lpfc_disable_msix(struct lpfc_hba *phba)
}
/**
- * lpfc_enable_msi: Enable MSI interrupt mode.
+ * lpfc_enable_msi - Enable MSI interrupt mode
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable the MSI interrupt mode. The kernel
@@ -2423,7 +2485,7 @@ lpfc_enable_msi(struct lpfc_hba *phba)
}
/**
- * lpfc_disable_msi: Disable MSI interrupt mode.
+ * lpfc_disable_msi - Disable MSI interrupt mode
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to disable the MSI interrupt mode. The driver
@@ -2441,7 +2503,7 @@ lpfc_disable_msi(struct lpfc_hba *phba)
}
/**
- * lpfc_log_intr_mode: Log the active interrupt mode
+ * lpfc_log_intr_mode - Log the active interrupt mode
* @phba: pointer to lpfc hba data structure.
* @intr_mode: active interrupt mode adopted.
*
@@ -2490,7 +2552,7 @@ lpfc_stop_port(struct lpfc_hba *phba)
}
/**
- * lpfc_enable_intr: Enable device interrupt.
+ * lpfc_enable_intr - Enable device interrupt
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to enable device interrupt and associate driver's
@@ -2547,7 +2609,7 @@ lpfc_enable_intr(struct lpfc_hba *phba, uint32_t cfg_mode)
}
/**
- * lpfc_disable_intr: Disable device interrupt.
+ * lpfc_disable_intr - Disable device interrupt
* @phba: pointer to lpfc hba data structure.
*
* This routine is invoked to disable device interrupt and disassociate the
@@ -2574,7 +2636,7 @@ lpfc_disable_intr(struct lpfc_hba *phba)
}
/**
- * lpfc_pci_probe_one: lpfc PCI probe func to register device to PCI subsystem.
+ * lpfc_pci_probe_one - lpfc PCI probe func to register device to PCI subsystem
* @pdev: pointer to PCI device
* @pid: pointer to PCI device identifier
*
@@ -3010,7 +3072,7 @@ out:
}
/**
- * lpfc_pci_remove_one: lpfc PCI func to unregister device from PCI subsystem.
+ * lpfc_pci_remove_one - lpfc PCI func to unregister device from PCI subsystem
* @pdev: pointer to PCI device
*
* This routine is to be registered to the kernel's PCI subsystem. When an
@@ -3033,8 +3095,6 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
lpfc_free_sysfs_attr(vport);
- kthread_stop(phba->worker_thread);
-
/* Release all the vports against this physical port */
vports = lpfc_create_vport_work_array(phba);
if (vports != NULL)
@@ -3052,7 +3112,12 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
* clears the rings, discards all mailbox commands, and resets
* the HBA.
*/
+
+ /* HBA interrupt will be diabled after this call */
lpfc_sli_hba_down(phba);
+ /* Stop kthread signal shall trigger work_done one more time */
+ kthread_stop(phba->worker_thread);
+ /* Final cleanup of txcmplq and reset the HBA */
lpfc_sli_brdrestart(phba);
lpfc_stop_phba_timers(phba);
@@ -3095,7 +3160,7 @@ lpfc_pci_remove_one(struct pci_dev *pdev)
}
/**
- * lpfc_pci_suspend_one: lpfc PCI func to suspend device for power management.
+ * lpfc_pci_suspend_one - lpfc PCI func to suspend device for power management
* @pdev: pointer to PCI device
* @msg: power management message
*
@@ -3139,7 +3204,7 @@ lpfc_pci_suspend_one(struct pci_dev *pdev, pm_message_t msg)
}
/**
- * lpfc_pci_resume_one: lpfc PCI func to resume device for power management.
+ * lpfc_pci_resume_one - lpfc PCI func to resume device for power management
* @pdev: pointer to PCI device
*
* This routine is to be registered to the kernel's PCI subsystem to support
@@ -3204,7 +3269,7 @@ lpfc_pci_resume_one(struct pci_dev *pdev)
}
/**
- * lpfc_io_error_detected: Driver method for handling PCI I/O error detected.
+ * lpfc_io_error_detected - Driver method for handling PCI I/O error detected
* @pdev: pointer to PCI device.
* @state: the current PCI connection state.
*
@@ -3254,7 +3319,7 @@ static pci_ers_result_t lpfc_io_error_detected(struct pci_dev *pdev,
}
/**
- * lpfc_io_slot_reset: Restart a PCI device from scratch.
+ * lpfc_io_slot_reset - Restart a PCI device from scratch
* @pdev: pointer to PCI device.
*
* This routine is registered to the PCI subsystem for error handling. This is
@@ -3313,7 +3378,7 @@ static pci_ers_result_t lpfc_io_slot_reset(struct pci_dev *pdev)
}
/**
- * lpfc_io_resume: Resume PCI I/O operation.
+ * lpfc_io_resume - Resume PCI I/O operation
* @pdev: pointer to PCI device
*
* This routine is registered to the PCI subsystem for error handling. It is
@@ -3426,7 +3491,7 @@ static struct pci_driver lpfc_driver = {
};
/**
- * lpfc_init: lpfc module initialization routine.
+ * lpfc_init - lpfc module initialization routine
*
* This routine is to be invoked when the lpfc module is loaded into the
* kernel. The special kernel macro module_init() is used to indicate the
@@ -3472,7 +3537,7 @@ lpfc_init(void)
}
/**
- * lpfc_exit: lpfc module removal routine.
+ * lpfc_exit - lpfc module removal routine
*
* This routine is invoked when the lpfc module is removed from the kernel.
* The special kernel macro module_exit() is used to indicate the role of
diff --git a/drivers/scsi/lpfc/lpfc_logmsg.h b/drivers/scsi/lpfc/lpfc_logmsg.h
index a85b7c196bb..1aa85709b01 100644
--- a/drivers/scsi/lpfc/lpfc_logmsg.h
+++ b/drivers/scsi/lpfc/lpfc_logmsg.h
@@ -27,7 +27,7 @@
#define LOG_FCP 0x40 /* FCP traffic history */
#define LOG_NODE 0x80 /* Node table events */
#define LOG_TEMP 0x100 /* Temperature sensor events */
-#define LOG_BG 0x200 /* BlockBuard events */
+#define LOG_BG 0x200 /* BlockGuard events */
#define LOG_MISC 0x400 /* Miscellaneous events */
#define LOG_SLI 0x800 /* SLI events */
#define LOG_FCP_ERROR 0x1000 /* log errors, not underruns */
diff --git a/drivers/scsi/lpfc/lpfc_mbox.c b/drivers/scsi/lpfc/lpfc_mbox.c
index 34eeb086a66..134fc7fc212 100644
--- a/drivers/scsi/lpfc/lpfc_mbox.c
+++ b/drivers/scsi/lpfc/lpfc_mbox.c
@@ -39,7 +39,7 @@
#include "lpfc_compat.h"
/**
- * lpfc_dump_mem: Prepare a mailbox command for retrieving HBA's VPD memory.
+ * lpfc_dump_mem - Prepare a mailbox command for retrieving HBA's VPD memory
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @offset: offset for dumping VPD memory mailbox command.
@@ -77,9 +77,10 @@ lpfc_dump_mem(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, uint16_t offset)
}
/**
- * lpfc_dump_mem: Prepare a mailbox command for retrieving wakeup params.
+ * lpfc_dump_wakeup_param - Prepare mailbox command for retrieving wakeup params
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
+ *
* This function create a dump memory mailbox command to dump wake up
* parameters.
*/
@@ -109,7 +110,7 @@ lpfc_dump_wakeup_param(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
}
/**
- * lpfc_read_nv: Prepare a mailbox command for reading HBA's NVRAM param.
+ * lpfc_read_nv - Prepare a mailbox command for reading HBA's NVRAM param
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
@@ -132,7 +133,7 @@ lpfc_read_nv(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
}
/**
- * lpfc_config_async: Prepare a mailbox command for enabling HBA async event.
+ * lpfc_config_async - Prepare a mailbox command for enabling HBA async event
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @ring: ring number for the asynchronous event to be configured.
@@ -159,7 +160,7 @@ lpfc_config_async(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb,
}
/**
- * lpfc_heart_beat: Prepare a mailbox command for heart beat.
+ * lpfc_heart_beat - Prepare a mailbox command for heart beat
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
@@ -184,7 +185,7 @@ lpfc_heart_beat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
}
/**
- * lpfc_read_la: Prepare a mailbox command for reading HBA link attention.
+ * lpfc_read_la - Prepare a mailbox command for reading HBA link attention
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @mp: DMA buffer memory for reading the link attention information into.
@@ -228,7 +229,7 @@ lpfc_read_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb, struct lpfc_dmabuf *mp)
}
/**
- * lpfc_clear_la: Prepare a mailbox command for clearing HBA link attention.
+ * lpfc_clear_la - Prepare a mailbox command for clearing HBA link attention
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
@@ -257,7 +258,7 @@ lpfc_clear_la(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
}
/**
- * lpfc_config_link: Prepare a mailbox command for configuring link on a HBA.
+ * lpfc_config_link - Prepare a mailbox command for configuring link on a HBA
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
@@ -305,7 +306,7 @@ lpfc_config_link(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
}
/**
- * lpfc_config_msi: Prepare a mailbox command for configuring msi-x.
+ * lpfc_config_msi - Prepare a mailbox command for configuring msi-x
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
@@ -383,7 +384,7 @@ lpfc_config_msi(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
}
/**
- * lpfc_init_link: Prepare a mailbox command for initialize link on a HBA.
+ * lpfc_init_link - Prepare a mailbox command for initialize link on a HBA
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @topology: the link topology for the link to be initialized to.
@@ -463,7 +464,7 @@ lpfc_init_link(struct lpfc_hba * phba,
}
/**
- * lpfc_read_sparam: Prepare a mailbox command for reading HBA parameters.
+ * lpfc_read_sparam - Prepare a mailbox command for reading HBA parameters
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
* @vpi: virtual N_Port identifier.
@@ -523,7 +524,7 @@ lpfc_read_sparam(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb, int vpi)
}
/**
- * lpfc_unreg_did: Prepare a mailbox command for unregistering DID.
+ * lpfc_unreg_did - Prepare a mailbox command for unregistering DID
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @did: remote port identifier.
@@ -555,7 +556,7 @@ lpfc_unreg_did(struct lpfc_hba * phba, uint16_t vpi, uint32_t did,
}
/**
- * lpfc_read_config: Prepare a mailbox command for reading HBA configuration.
+ * lpfc_read_config - Prepare a mailbox command for reading HBA configuration
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
@@ -581,7 +582,7 @@ lpfc_read_config(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
}
/**
- * lpfc_read_lnk_stat: Prepare a mailbox command for reading HBA link stats.
+ * lpfc_read_lnk_stat - Prepare a mailbox command for reading HBA link stats
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
@@ -606,7 +607,7 @@ lpfc_read_lnk_stat(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
}
/**
- * lpfc_reg_login: Prepare a mailbox command for registering remote login.
+ * lpfc_reg_login - Prepare a mailbox command for registering remote login
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @did: remote port identifier.
@@ -677,7 +678,7 @@ lpfc_reg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t did,
}
/**
- * lpfc_unreg_login: Prepare a mailbox command for unregistering remote login.
+ * lpfc_unreg_login - Prepare a mailbox command for unregistering remote login
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @rpi: remote port identifier
@@ -709,7 +710,7 @@ lpfc_unreg_login(struct lpfc_hba *phba, uint16_t vpi, uint32_t rpi,
}
/**
- * lpfc_reg_vpi: Prepare a mailbox command for registering vport identifier.
+ * lpfc_reg_vpi - Prepare a mailbox command for registering vport identifier
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @sid: Fibre Channel S_ID (N_Port_ID assigned to a virtual N_Port).
@@ -741,7 +742,7 @@ lpfc_reg_vpi(struct lpfc_hba *phba, uint16_t vpi, uint32_t sid,
}
/**
- * lpfc_unreg_vpi: Prepare a mailbox command for unregistering vport id.
+ * lpfc_unreg_vpi - Prepare a mailbox command for unregistering vport id
* @phba: pointer to lpfc hba data structure.
* @vpi: virtual N_Port identifier.
* @pmb: pointer to the driver internal queue element for mailbox command.
@@ -771,7 +772,7 @@ lpfc_unreg_vpi(struct lpfc_hba *phba, uint16_t vpi, LPFC_MBOXQ_t *pmb)
}
/**
- * lpfc_config_pcb_setup: Set up IOCB rings in the Port Control Block (PCB)
+ * lpfc_config_pcb_setup - Set up IOCB rings in the Port Control Block (PCB)
* @phba: pointer to lpfc hba data structure.
*
* This routine sets up and initializes the IOCB rings in the Port Control
@@ -835,7 +836,7 @@ lpfc_config_pcb_setup(struct lpfc_hba * phba)
}
/**
- * lpfc_read_rev: Prepare a mailbox command for reading HBA revision.
+ * lpfc_read_rev - Prepare a mailbox command for reading HBA revision
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
@@ -861,7 +862,7 @@ lpfc_read_rev(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
}
/**
- * lpfc_build_hbq_profile2: Set up the HBQ Selection Profile 2.
+ * lpfc_build_hbq_profile2 - Set up the HBQ Selection Profile 2
* @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
* @hbq_desc: pointer to the HBQ selection profile descriptor.
*
@@ -880,7 +881,7 @@ lpfc_build_hbq_profile2(struct config_hbq_var *hbqmb,
}
/**
- * lpfc_build_hbq_profile3: Set up the HBQ Selection Profile 3.
+ * lpfc_build_hbq_profile3 - Set up the HBQ Selection Profile 3
* @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
* @hbq_desc: pointer to the HBQ selection profile descriptor.
*
@@ -902,7 +903,7 @@ lpfc_build_hbq_profile3(struct config_hbq_var *hbqmb,
}
/**
- * lpfc_build_hbq_profile5: Set up the HBQ Selection Profile 5.
+ * lpfc_build_hbq_profile5 - Set up the HBQ Selection Profile 5
* @hbqmb: pointer to the HBQ configuration data structure in mailbox command.
* @hbq_desc: pointer to the HBQ selection profile descriptor.
*
@@ -925,7 +926,7 @@ lpfc_build_hbq_profile5(struct config_hbq_var *hbqmb,
}
/**
- * lpfc_config_hbq: Prepare a mailbox command for configuring an HBQ.
+ * lpfc_config_hbq - Prepare a mailbox command for configuring an HBQ
* @phba: pointer to lpfc hba data structure.
* @id: HBQ identifier.
* @hbq_desc: pointer to the HBA descriptor data structure.
@@ -999,7 +1000,7 @@ lpfc_config_hbq(struct lpfc_hba *phba, uint32_t id,
}
/**
- * lpfc_config_ring: Prepare a mailbox command for configuring an IOCB ring.
+ * lpfc_config_ring - Prepare a mailbox command for configuring an IOCB ring
* @phba: pointer to lpfc hba data structure.
* @ring:
* @pmb: pointer to the driver internal queue element for mailbox command.
@@ -1057,7 +1058,7 @@ lpfc_config_ring(struct lpfc_hba * phba, int ring, LPFC_MBOXQ_t * pmb)
}
/**
- * lpfc_config_port: Prepare a mailbox command for configuring port.
+ * lpfc_config_port - Prepare a mailbox command for configuring port
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
@@ -1227,7 +1228,7 @@ lpfc_config_port(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
}
/**
- * lpfc_kill_board: Prepare a mailbox command for killing board.
+ * lpfc_kill_board - Prepare a mailbox command for killing board
* @phba: pointer to lpfc hba data structure.
* @pmb: pointer to the driver internal queue element for mailbox command.
*
@@ -1253,7 +1254,7 @@ lpfc_kill_board(struct lpfc_hba * phba, LPFC_MBOXQ_t * pmb)
}
/**
- * lpfc_mbox_put: Put a mailbox cmd into the tail of driver's mailbox queue.
+ * lpfc_mbox_put - Put a mailbox cmd into the tail of driver's mailbox queue
* @phba: pointer to lpfc hba data structure.
* @mbq: pointer to the driver internal queue element for mailbox command.
*
@@ -1277,7 +1278,7 @@ lpfc_mbox_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq)
}
/**
- * lpfc_mbox_get: Remove a mailbox cmd from the head of driver's mailbox queue.
+ * lpfc_mbox_get - Remove a mailbox cmd from the head of driver's mailbox queue
* @phba: pointer to lpfc hba data structure.
*
* Driver maintains a internal mailbox command queue implemented as a linked
@@ -1304,7 +1305,7 @@ lpfc_mbox_get(struct lpfc_hba * phba)
}
/**
- * lpfc_mbox_cmpl_put: Put mailbox command into mailbox command complete list.
+ * lpfc_mbox_cmpl_put - Put mailbox command into mailbox command complete list
* @phba: pointer to lpfc hba data structure.
* @mbq: pointer to the driver internal queue element for mailbox command.
*
@@ -1327,7 +1328,7 @@ lpfc_mbox_cmpl_put(struct lpfc_hba * phba, LPFC_MBOXQ_t * mbq)
}
/**
- * lpfc_mbox_tmo_val: Retrieve mailbox command timeout value.
+ * lpfc_mbox_tmo_val - Retrieve mailbox command timeout value
* @phba: pointer to lpfc hba data structure.
* @cmd: mailbox command code.
*
diff --git a/drivers/scsi/lpfc/lpfc_mem.c b/drivers/scsi/lpfc/lpfc_mem.c
index a4bba206924..35a97673339 100644
--- a/drivers/scsi/lpfc/lpfc_mem.c
+++ b/drivers/scsi/lpfc/lpfc_mem.c
@@ -41,7 +41,7 @@
/**
- * lpfc_mem_alloc: create and allocate all PCI and memory pools
+ * lpfc_mem_alloc - create and allocate all PCI and memory pools
* @phba: HBA to allocate pools for
*
* Description: Creates and allocates PCI pools lpfc_scsi_dma_buf_pool,
@@ -136,12 +136,12 @@ lpfc_mem_alloc(struct lpfc_hba * phba)
}
/**
- * lpfc_mem_free: Frees all PCI and memory allocated by lpfc_mem_alloc
+ * lpfc_mem_free - Frees all PCI and memory allocated by lpfc_mem_alloc
* @phba: HBA to free memory for
*
* Description: Frees PCI pools lpfc_scsi_dma_buf_pool, lpfc_mbuf_pool,
* lpfc_hbq_pool. Frees kmalloc-backed mempools for LPFC_MBOXQ_t and
- * lpfc_nodelist. Also frees the VPI bitmask.
+ * lpfc_nodelist. Also frees the VPI bitmask
*
* Returns: None
**/
@@ -212,7 +212,7 @@ lpfc_mem_free(struct lpfc_hba * phba)
}
/**
- * lpfc_mbuf_alloc: Allocate an mbuf from the lpfc_mbuf_pool PCI pool
+ * lpfc_mbuf_alloc - Allocate an mbuf from the lpfc_mbuf_pool PCI pool
* @phba: HBA which owns the pool to allocate from
* @mem_flags: indicates if this is a priority (MEM_PRI) allocation
* @handle: used to return the DMA-mapped address of the mbuf
@@ -249,7 +249,7 @@ lpfc_mbuf_alloc(struct lpfc_hba *phba, int mem_flags, dma_addr_t *handle)
}
/**
- * __lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (locked)
+ * __lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (locked)
* @phba: HBA which owns the pool to return to
* @virt: mbuf to free
* @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed
@@ -278,7 +278,7 @@ __lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma)
}
/**
- * lpfc_mem_free: Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked)
+ * lpfc_mbuf_free - Free an mbuf from the lpfc_mbuf_pool PCI pool (unlocked)
* @phba: HBA which owns the pool to return to
* @virt: mbuf to free
* @dma: the DMA-mapped address of the lpfc_mbuf_pool to be freed
@@ -291,7 +291,6 @@ __lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma)
* Returns: None
**/
void
-
lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma)
{
unsigned long iflags;
@@ -303,7 +302,7 @@ lpfc_mbuf_free(struct lpfc_hba * phba, void *virt, dma_addr_t dma)
}
/**
- * lpfc_els_hbq_alloc: Allocate an HBQ buffer
+ * lpfc_els_hbq_alloc - Allocate an HBQ buffer
* @phba: HBA to allocate HBQ buffer for
*
* Description: Allocates a DMA-mapped HBQ buffer from the lpfc_hbq_pool PCI
@@ -335,7 +334,7 @@ lpfc_els_hbq_alloc(struct lpfc_hba *phba)
}
/**
- * lpfc_mem_hbq_free: Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
+ * lpfc_mem_hbq_free - Frees an HBQ buffer allocated with lpfc_els_hbq_alloc
* @phba: HBA buffer was allocated for
* @hbqbp: HBQ container returned by lpfc_els_hbq_alloc
*
@@ -355,7 +354,7 @@ lpfc_els_hbq_free(struct lpfc_hba *phba, struct hbq_dmabuf *hbqbp)
}
/**
- * lpfc_in_buf_free: Free a DMA buffer
+ * lpfc_in_buf_free - Free a DMA buffer
* @phba: HBA buffer is associated with
* @mp: Buffer to free
*
diff --git a/drivers/scsi/lpfc/lpfc_nportdisc.c b/drivers/scsi/lpfc/lpfc_nportdisc.c
index 8f548adae9c..08cdc77af41 100644
--- a/drivers/scsi/lpfc/lpfc_nportdisc.c
+++ b/drivers/scsi/lpfc/lpfc_nportdisc.c
@@ -192,7 +192,6 @@ lpfc_els_abort(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring = &psli->ring[LPFC_ELS_RING];
struct lpfc_iocbq *iocb, *next_iocb;
- IOCB_t *cmd;
/* Abort outstanding I/O on NPort <nlp_DID> */
lpfc_printf_vlog(ndlp->vport, KERN_INFO, LOG_DISCOVERY,
@@ -223,19 +222,10 @@ lpfc_els_abort(struct lpfc_hba *phba, struct lpfc_nodelist *ndlp)
}
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
+
lpfc_cancel_retry_delay_tmo(phba->pport, ndlp);
return 0;
}
diff --git a/drivers/scsi/lpfc/lpfc_scsi.c b/drivers/scsi/lpfc/lpfc_scsi.c
index 36fd2e75da1..167b66dd34c 100644
--- a/drivers/scsi/lpfc/lpfc_scsi.c
+++ b/drivers/scsi/lpfc/lpfc_scsi.c
@@ -112,7 +112,7 @@ lpfc_debug_save_dif(struct scsi_cmnd *cmnd)
}
/**
- * lpfc_update_stats: Update statistical data for the command completion.
+ * lpfc_update_stats - Update statistical data for the command completion
* @phba: Pointer to HBA object.
* @lpfc_cmd: lpfc scsi command object pointer.
*
@@ -165,8 +165,7 @@ lpfc_update_stats(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
}
/**
- * lpfc_send_sdev_queuedepth_change_event: Posts a queuedepth change
- * event.
+ * lpfc_send_sdev_queuedepth_change_event - Posts a queuedepth change event
* @phba: Pointer to HBA context object.
* @vport: Pointer to vport object.
* @ndlp: Pointer to FC node associated with the target.
@@ -220,7 +219,7 @@ lpfc_send_sdev_queuedepth_change_event(struct lpfc_hba *phba,
}
/**
- * lpfc_rampdown_queue_depth: Post RAMP_DOWN_QUEUE event to worker thread.
+ * lpfc_rampdown_queue_depth - Post RAMP_DOWN_QUEUE event to worker thread
* @phba: The Hba for which this call is being executed.
*
* This routine is called when there is resource error in driver or firmware.
@@ -261,7 +260,7 @@ lpfc_rampdown_queue_depth(struct lpfc_hba *phba)
}
/**
- * lpfc_rampup_queue_depth: Post RAMP_UP_QUEUE event for worker thread.
+ * lpfc_rampup_queue_depth - Post RAMP_UP_QUEUE event for worker thread
* @phba: The Hba for which this call is being executed.
*
* This routine post WORKER_RAMP_UP_QUEUE event for @phba vport. This routine
@@ -273,14 +272,14 @@ lpfc_rampdown_queue_depth(struct lpfc_hba *phba)
**/
static inline void
lpfc_rampup_queue_depth(struct lpfc_vport *vport,
- struct scsi_device *sdev)
+ uint32_t queue_depth)
{
unsigned long flags;
struct lpfc_hba *phba = vport->phba;
uint32_t evt_posted;
atomic_inc(&phba->num_cmd_success);
- if (vport->cfg_lun_queue_depth <= sdev->queue_depth)
+ if (vport->cfg_lun_queue_depth <= queue_depth)
return;
spin_lock_irqsave(&phba->hbalock, flags);
if (((phba->last_ramp_up_time + QUEUE_RAMP_UP_INTERVAL) > jiffies) ||
@@ -303,7 +302,7 @@ lpfc_rampup_queue_depth(struct lpfc_vport *vport,
}
/**
- * lpfc_ramp_down_queue_handler: WORKER_RAMP_DOWN_QUEUE event handler.
+ * lpfc_ramp_down_queue_handler - WORKER_RAMP_DOWN_QUEUE event handler
* @phba: The Hba for which this call is being executed.
*
* This routine is called to process WORKER_RAMP_DOWN_QUEUE event for worker
@@ -361,7 +360,7 @@ lpfc_ramp_down_queue_handler(struct lpfc_hba *phba)
}
/**
- * lpfc_ramp_up_queue_handler: WORKER_RAMP_UP_QUEUE event handler.
+ * lpfc_ramp_up_queue_handler - WORKER_RAMP_UP_QUEUE event handler
* @phba: The Hba for which this call is being executed.
*
* This routine is called to process WORKER_RAMP_UP_QUEUE event for worker
@@ -410,7 +409,7 @@ lpfc_ramp_up_queue_handler(struct lpfc_hba *phba)
}
/**
- * lpfc_scsi_dev_block: set all scsi hosts to block state.
+ * lpfc_scsi_dev_block - set all scsi hosts to block state
* @phba: Pointer to HBA context object.
*
* This function walks vport list and set each SCSI host to block state
@@ -439,7 +438,7 @@ lpfc_scsi_dev_block(struct lpfc_hba *phba)
}
/**
- * lpfc_new_scsi_buf: Scsi buffer allocator.
+ * lpfc_new_scsi_buf - Scsi buffer allocator
* @vport: The virtual port for which this call being executed.
*
* This routine allocates a scsi buffer, which contains all the necessary
@@ -563,7 +562,7 @@ lpfc_new_scsi_buf(struct lpfc_vport *vport)
}
/**
- * lpfc_get_scsi_buf: Get a scsi buffer from lpfc_scsi_buf_list list of Hba.
+ * lpfc_get_scsi_buf - Get a scsi buffer from lpfc_scsi_buf_list list of Hba
* @phba: The Hba for which this call is being executed.
*
* This routine removes a scsi buffer from head of @phba lpfc_scsi_buf_list list
@@ -592,7 +591,7 @@ lpfc_get_scsi_buf(struct lpfc_hba * phba)
}
/**
- * lpfc_release_scsi_buf: Return a scsi buffer back to hba lpfc_scsi_buf_list list.
+ * lpfc_release_scsi_buf - Return a scsi buffer back to hba's lpfc_scsi_buf_list
* @phba: The Hba for which this call is being executed.
* @psb: The scsi buffer which is being released.
*
@@ -611,7 +610,7 @@ lpfc_release_scsi_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *psb)
}
/**
- * lpfc_scsi_prep_dma_buf: Routine to do DMA mapping for scsi buffer.
+ * lpfc_scsi_prep_dma_buf - Routine to do DMA mapping for scsi buffer
* @phba: The Hba for which this call is being executed.
* @lpfc_cmd: The scsi buffer which is going to be mapped.
*
@@ -738,7 +737,7 @@ lpfc_scsi_prep_dma_buf(struct lpfc_hba *phba, struct lpfc_scsi_buf *lpfc_cmd)
* Due to difference in data length between DIF/non-DIF paths,
* we need to set word 4 of IOCB here
*/
- iocb_cmd->un.fcpi.fcpi_parm = le32_to_cpu(scsi_bufflen(scsi_cmnd));
+ iocb_cmd->un.fcpi.fcpi_parm = scsi_bufflen(scsi_cmnd);
return 0;
}
@@ -823,9 +822,9 @@ lpfc_cmd_blksize(struct scsi_cmnd *sc)
/**
* lpfc_get_cmd_dif_parms - Extract DIF parameters from SCSI command
* @sc: in: SCSI command
- * @apptagmask out: app tag mask
- * @apptagval out: app tag value
- * @reftag out: ref tag (reference tag)
+ * @apptagmask: out: app tag mask
+ * @apptagval: out: app tag value
+ * @reftag: out: ref tag (reference tag)
*
* Description:
* Extract DIF paramters from the command if possible. Otherwise,
@@ -1413,7 +1412,7 @@ out:
}
/**
- * lpfc_send_scsi_error_event: Posts an event when there is SCSI error.
+ * lpfc_send_scsi_error_event - Posts an event when there is SCSI error
* @phba: Pointer to hba context object.
* @vport: Pointer to vport object.
* @lpfc_cmd: Pointer to lpfc scsi command which reported the error.
@@ -1505,7 +1504,7 @@ lpfc_send_scsi_error_event(struct lpfc_hba *phba, struct lpfc_vport *vport,
}
/**
- * lpfc_scsi_unprep_dma_buf: Routine to un-map DMA mapping of scatter gather.
+ * lpfc_scsi_unprep_dma_buf - Routine to un-map DMA mapping of scatter gather
* @phba: The Hba for which this call is being executed.
* @psb: The scsi buffer which is going to be un-mapped.
*
@@ -1530,7 +1529,7 @@ lpfc_scsi_unprep_dma_buf(struct lpfc_hba * phba, struct lpfc_scsi_buf * psb)
}
/**
- * lpfc_handler_fcp_err: FCP response handler.
+ * lpfc_handler_fcp_err - FCP response handler
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
* @rsp_iocb: The response IOCB which contains FCP error.
@@ -1674,7 +1673,7 @@ lpfc_handle_fcp_err(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
}
/**
- * lpfc_scsi_cmd_iocb_cmpl: Scsi cmnd IOCB completion routine.
+ * lpfc_scsi_cmd_iocb_cmpl - Scsi cmnd IOCB completion routine
* @phba: The Hba for which this call is being executed.
* @pIocbIn: The command IOCBQ for the scsi cmnd.
* @pIocbOut: The response IOCBQ for the scsi cmnd .
@@ -1694,10 +1693,12 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
struct lpfc_nodelist *pnode = rdata->pnode;
struct scsi_cmnd *cmd = lpfc_cmd->pCmd;
int result;
- struct scsi_device *sdev, *tmp_sdev;
+ struct scsi_device *tmp_sdev;
int depth = 0;
unsigned long flags;
struct lpfc_fast_path_event *fast_path_evt;
+ struct Scsi_Host *shost = cmd->device->host;
+ uint32_t queue_depth, scsi_id;
lpfc_cmd->result = pIocbOut->iocb.un.ulpWord[4];
lpfc_cmd->status = pIocbOut->iocb.ulpStatus;
@@ -1808,11 +1809,10 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
lpfc_update_stats(phba, lpfc_cmd);
result = cmd->result;
- sdev = cmd->device;
if (vport->cfg_max_scsicmpl_time &&
time_after(jiffies, lpfc_cmd->start_time +
msecs_to_jiffies(vport->cfg_max_scsicmpl_time))) {
- spin_lock_irqsave(sdev->host->host_lock, flags);
+ spin_lock_irqsave(shost->host_lock, flags);
if (pnode && NLP_CHK_NODE_ACT(pnode)) {
if (pnode->cmd_qdepth >
atomic_read(&pnode->cmd_pending) &&
@@ -1825,22 +1825,26 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
pnode->last_change_time = jiffies;
}
- spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ spin_unlock_irqrestore(shost->host_lock, flags);
} else if (pnode && NLP_CHK_NODE_ACT(pnode)) {
if ((pnode->cmd_qdepth < LPFC_MAX_TGT_QDEPTH) &&
time_after(jiffies, pnode->last_change_time +
msecs_to_jiffies(LPFC_TGTQ_INTERVAL))) {
- spin_lock_irqsave(sdev->host->host_lock, flags);
+ spin_lock_irqsave(shost->host_lock, flags);
pnode->cmd_qdepth += pnode->cmd_qdepth *
LPFC_TGTQ_RAMPUP_PCENT / 100;
if (pnode->cmd_qdepth > LPFC_MAX_TGT_QDEPTH)
pnode->cmd_qdepth = LPFC_MAX_TGT_QDEPTH;
pnode->last_change_time = jiffies;
- spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ spin_unlock_irqrestore(shost->host_lock, flags);
}
}
lpfc_scsi_unprep_dma_buf(phba, lpfc_cmd);
+
+ /* The sdev is not guaranteed to be valid post scsi_done upcall. */
+ queue_depth = cmd->device->queue_depth;
+ scsi_id = cmd->device->id;
cmd->scsi_done(cmd);
if (phba->cfg_poll & ENABLE_FCP_RING_POLLING) {
@@ -1848,28 +1852,28 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
* If there is a thread waiting for command completion
* wake up the thread.
*/
- spin_lock_irqsave(sdev->host->host_lock, flags);
+ spin_lock_irqsave(shost->host_lock, flags);
lpfc_cmd->pCmd = NULL;
if (lpfc_cmd->waitq)
wake_up(lpfc_cmd->waitq);
- spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ spin_unlock_irqrestore(shost->host_lock, flags);
lpfc_release_scsi_buf(phba, lpfc_cmd);
return;
}
if (!result)
- lpfc_rampup_queue_depth(vport, sdev);
+ lpfc_rampup_queue_depth(vport, queue_depth);
if (!result && pnode && NLP_CHK_NODE_ACT(pnode) &&
((jiffies - pnode->last_ramp_up_time) >
LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
((jiffies - pnode->last_q_full_time) >
LPFC_Q_RAMP_UP_INTERVAL * HZ) &&
- (vport->cfg_lun_queue_depth > sdev->queue_depth)) {
- shost_for_each_device(tmp_sdev, sdev->host) {
+ (vport->cfg_lun_queue_depth > queue_depth)) {
+ shost_for_each_device(tmp_sdev, shost) {
if (vport->cfg_lun_queue_depth > tmp_sdev->queue_depth){
- if (tmp_sdev->id != sdev->id)
+ if (tmp_sdev->id != scsi_id)
continue;
if (tmp_sdev->ordered_tags)
scsi_adjust_queue_depth(tmp_sdev,
@@ -1885,7 +1889,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
}
lpfc_send_sdev_queuedepth_change_event(phba, vport, pnode,
0xFFFFFFFF,
- sdev->queue_depth - 1, sdev->queue_depth);
+ queue_depth , queue_depth + 1);
}
/*
@@ -1896,8 +1900,8 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
NLP_CHK_NODE_ACT(pnode)) {
pnode->last_q_full_time = jiffies;
- shost_for_each_device(tmp_sdev, sdev->host) {
- if (tmp_sdev->id != sdev->id)
+ shost_for_each_device(tmp_sdev, shost) {
+ if (tmp_sdev->id != scsi_id)
continue;
depth = scsi_track_queue_full(tmp_sdev,
tmp_sdev->queue_depth - 1);
@@ -1909,7 +1913,7 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
* scsi_track_queue_full.
*/
if (depth == -1)
- depth = sdev->host->cmd_per_lun;
+ depth = shost->cmd_per_lun;
if (depth) {
lpfc_printf_vlog(vport, KERN_WARNING, LOG_FCP,
@@ -1925,17 +1929,17 @@ lpfc_scsi_cmd_iocb_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *pIocbIn,
* If there is a thread waiting for command completion
* wake up the thread.
*/
- spin_lock_irqsave(sdev->host->host_lock, flags);
+ spin_lock_irqsave(shost->host_lock, flags);
lpfc_cmd->pCmd = NULL;
if (lpfc_cmd->waitq)
wake_up(lpfc_cmd->waitq);
- spin_unlock_irqrestore(sdev->host->host_lock, flags);
+ spin_unlock_irqrestore(shost->host_lock, flags);
lpfc_release_scsi_buf(phba, lpfc_cmd);
}
/**
- * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB.
+ * lpfc_fcpcmd_to_iocb - copy the fcp_cmd data into the IOCB
* @data: A pointer to the immediate command data portion of the IOCB.
* @fcp_cmnd: The FCP Command that is provided by the SCSI layer.
*
@@ -1953,7 +1957,7 @@ lpfc_fcpcmd_to_iocb(uint8_t *data, struct fcp_cmnd *fcp_cmnd)
}
/**
- * lpfc_scsi_prep_cmnd: Routine to convert scsi cmnd to FCP information unit.
+ * lpfc_scsi_prep_cmnd - Routine to convert scsi cmnd to FCP information unit
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: The scsi command which needs to send.
* @pnode: Pointer to lpfc_nodelist.
@@ -2047,7 +2051,7 @@ lpfc_scsi_prep_cmnd(struct lpfc_vport *vport, struct lpfc_scsi_buf *lpfc_cmd,
}
/**
- * lpfc_scsi_prep_task_mgmt_cmnd: Convert scsi TM cmnd to FCP information unit.
+ * lpfc_scsi_prep_task_mgmt_cmnd - Convert scsi TM cmnd to FCP information unit
* @vport: The virtual port for which this call is being executed.
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure.
* @lun: Logical unit number.
@@ -2110,7 +2114,7 @@ lpfc_scsi_prep_task_mgmt_cmd(struct lpfc_vport *vport,
}
/**
- * lpc_taskmgmt_def_cmpl: IOCB completion routine for task management command.
+ * lpfc_taskmgmt_def_cmpl - IOCB completion routine for task management command
* @phba: The Hba for which this call is being executed.
* @cmdiocbq: Pointer to lpfc_iocbq data structure.
* @rspiocbq: Pointer to lpfc_iocbq data structure.
@@ -2131,7 +2135,7 @@ lpfc_tskmgmt_def_cmpl(struct lpfc_hba *phba,
}
/**
- * lpfc_scsi_tgt_reset: Target reset handler.
+ * lpfc_scsi_tgt_reset - Target reset handler
* @lpfc_cmd: Pointer to lpfc_scsi_buf data structure
* @vport: The virtual port for which this call is being executed.
* @tgt_id: Target ID.
@@ -2198,7 +2202,7 @@ lpfc_scsi_tgt_reset(struct lpfc_scsi_buf *lpfc_cmd, struct lpfc_vport *vport,
}
/**
- * lpfc_info: Info entry point of scsi_host_template data structure.
+ * lpfc_info - Info entry point of scsi_host_template data structure
* @host: The scsi host for which this call is being executed.
*
* This routine provides module information about hba.
@@ -2236,7 +2240,7 @@ lpfc_info(struct Scsi_Host *host)
}
/**
- * lpfc_poll_rearm_time: Routine to modify fcp_poll timer of hba.
+ * lpfc_poll_rearm_time - Routine to modify fcp_poll timer of hba
* @phba: The Hba for which this call is being executed.
*
* This routine modifies fcp_poll_timer field of @phba by cfg_poll_tmo.
@@ -2253,7 +2257,7 @@ static __inline__ void lpfc_poll_rearm_timer(struct lpfc_hba * phba)
}
/**
- * lpfc_poll_start_timer: Routine to start fcp_poll_timer of HBA.
+ * lpfc_poll_start_timer - Routine to start fcp_poll_timer of HBA
* @phba: The Hba for which this call is being executed.
*
* This routine starts the fcp_poll_timer of @phba.
@@ -2264,7 +2268,7 @@ void lpfc_poll_start_timer(struct lpfc_hba * phba)
}
/**
- * lpfc_poll_timeout: Restart polling timer.
+ * lpfc_poll_timeout - Restart polling timer
* @ptr: Map to lpfc_hba data structure pointer.
*
* This routine restarts fcp_poll timer, when FCP ring polling is enable
@@ -2283,8 +2287,7 @@ void lpfc_poll_timeout(unsigned long ptr)
}
/**
- * lpfc_queuecommand: Queuecommand entry point of Scsi Host Templater data
- * structure.
+ * lpfc_queuecommand - scsi_host_template queuecommand entry point
* @cmnd: Pointer to scsi_cmnd data structure.
* @done: Pointer to done routine.
*
@@ -2450,7 +2453,7 @@ lpfc_queuecommand(struct scsi_cmnd *cmnd, void (*done) (struct scsi_cmnd *))
}
/**
- * lpfc_block_error_handler: Routine to block error handler.
+ * lpfc_block_error_handler - Routine to block error handler
* @cmnd: Pointer to scsi_cmnd data structure.
*
* This routine blocks execution till fc_rport state is not FC_PORSTAT_BLCOEKD.
@@ -2472,8 +2475,7 @@ lpfc_block_error_handler(struct scsi_cmnd *cmnd)
}
/**
- * lpfc_abort_handler: Eh_abort_handler entry point of Scsi Host Template data
- *structure.
+ * lpfc_abort_handler - scsi_host_template eh_abort_handler entry point
* @cmnd: Pointer to scsi_cmnd data structure.
*
* This routine aborts @cmnd pending in base driver.
@@ -2578,8 +2580,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
}
/**
- * lpfc_device_reset_handler: eh_device_reset entry point of Scsi Host Template
- *data structure.
+ * lpfc_device_reset_handler - scsi_host_template eh_device_reset entry point
* @cmnd: Pointer to scsi_cmnd data structure.
*
* This routine does a device reset by sending a TARGET_RESET task management
@@ -2587,7 +2588,7 @@ lpfc_abort_handler(struct scsi_cmnd *cmnd)
*
* Return code :
* 0x2003 - Error
- * 0ex2002 - Success
+ * 0x2002 - Success
**/
static int
lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
@@ -2707,8 +2708,7 @@ lpfc_device_reset_handler(struct scsi_cmnd *cmnd)
}
/**
- * lpfc_bus_reset_handler: eh_bus_reset_handler entry point of Scsi Host
- * Template data structure.
+ * lpfc_bus_reset_handler - scsi_host_template eh_bus_reset_handler entry point
* @cmnd: Pointer to scsi_cmnd data structure.
*
* This routine does target reset to all target on @cmnd->device->host.
@@ -2808,8 +2808,7 @@ lpfc_bus_reset_handler(struct scsi_cmnd *cmnd)
}
/**
- * lpfc_slave_alloc: slave_alloc entry point of Scsi Host Template data
- * structure.
+ * lpfc_slave_alloc - scsi_host_template slave_alloc entry point
* @sdev: Pointer to scsi_device.
*
* This routine populates the cmds_per_lun count + 2 scsi_bufs into this host's
@@ -2883,8 +2882,7 @@ lpfc_slave_alloc(struct scsi_device *sdev)
}
/**
- * lpfc_slave_configure: slave_configure entry point of Scsi Host Templater data
- * structure.
+ * lpfc_slave_configure - scsi_host_template slave_configure entry point
* @sdev: Pointer to scsi_device.
*
* This routine configures following items
@@ -2925,7 +2923,7 @@ lpfc_slave_configure(struct scsi_device *sdev)
}
/**
- * lpfc_slave_destroy: slave_destroy entry point of SHT data structure.
+ * lpfc_slave_destroy - slave_destroy entry point of SHT data structure
* @sdev: Pointer to scsi_device.
*
* This routine sets @sdev hostatdata filed to null.
diff --git a/drivers/scsi/lpfc/lpfc_sli.c b/drivers/scsi/lpfc/lpfc_sli.c
index a36a120561e..eb5c75c45ba 100644
--- a/drivers/scsi/lpfc/lpfc_sli.c
+++ b/drivers/scsi/lpfc/lpfc_sli.c
@@ -68,7 +68,7 @@ typedef enum _lpfc_iocb_type {
} lpfc_iocb_type;
/**
- * lpfc_cmd_iocb: Get next command iocb entry in the ring.
+ * lpfc_cmd_iocb - Get next command iocb entry in the ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
@@ -85,7 +85,7 @@ lpfc_cmd_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
}
/**
- * lpfc_resp_iocb: Get next response iocb entry in the ring.
+ * lpfc_resp_iocb - Get next response iocb entry in the ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
@@ -102,7 +102,7 @@ lpfc_resp_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
}
/**
- * __lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool.
+ * __lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool
* @phba: Pointer to HBA context object.
*
* This function is called with hbalock held. This function
@@ -121,7 +121,7 @@ __lpfc_sli_get_iocbq(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_get_iocbq: Allocates an iocb object from iocb pool.
+ * lpfc_sli_get_iocbq - Allocates an iocb object from iocb pool
* @phba: Pointer to HBA context object.
*
* This function is called with no lock held. This function
@@ -142,7 +142,7 @@ lpfc_sli_get_iocbq(struct lpfc_hba *phba)
}
/**
- * __lpfc_sli_release_iocbq: Release iocb to the iocb pool.
+ * __lpfc_sli_release_iocbq - Release iocb to the iocb pool
* @phba: Pointer to HBA context object.
* @iocbq: Pointer to driver iocb object.
*
@@ -164,7 +164,7 @@ __lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
}
/**
- * lpfc_sli_release_iocbq: Release iocb to the iocb pool.
+ * lpfc_sli_release_iocbq - Release iocb to the iocb pool
* @phba: Pointer to HBA context object.
* @iocbq: Pointer to driver iocb object.
*
@@ -185,8 +185,40 @@ lpfc_sli_release_iocbq(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
}
/**
- * lpfc_sli_iocb_cmd_type: Get the iocb type.
- * @iocb_cmnd : iocb command code.
+ * lpfc_sli_cancel_iocbs - Cancel all iocbs from a list.
+ * @phba: Pointer to HBA context object.
+ * @iocblist: List of IOCBs.
+ * @ulpstatus: ULP status in IOCB command field.
+ * @ulpWord4: ULP word-4 in IOCB command field.
+ *
+ * This function is called with a list of IOCBs to cancel. It cancels the IOCB
+ * on the list by invoking the complete callback function associated with the
+ * IOCB with the provided @ulpstatus and @ulpword4 set to the IOCB commond
+ * fields.
+ **/
+void
+lpfc_sli_cancel_iocbs(struct lpfc_hba *phba, struct list_head *iocblist,
+ uint32_t ulpstatus, uint32_t ulpWord4)
+{
+ struct lpfc_iocbq *piocb;
+
+ while (!list_empty(iocblist)) {
+ list_remove_head(iocblist, piocb, struct lpfc_iocbq, list);
+
+ if (!piocb->iocb_cmpl)
+ lpfc_sli_release_iocbq(phba, piocb);
+ else {
+ piocb->iocb.ulpStatus = ulpstatus;
+ piocb->iocb.un.ulpWord[4] = ulpWord4;
+ (piocb->iocb_cmpl) (phba, piocb, piocb);
+ }
+ }
+ return;
+}
+
+/**
+ * lpfc_sli_iocb_cmd_type - Get the iocb type
+ * @iocb_cmnd: iocb command code.
*
* This function is called by ring event handler function to get the iocb type.
* This function translates the iocb command to an iocb command type used to
@@ -295,7 +327,7 @@ lpfc_sli_iocb_cmd_type(uint8_t iocb_cmnd)
}
/**
- * lpfc_sli_ring_map: Issue config_ring mbox for all rings.
+ * lpfc_sli_ring_map - Issue config_ring mbox for all rings
* @phba: Pointer to HBA context object.
*
* This function is called from SLI initialization code
@@ -338,7 +370,7 @@ lpfc_sli_ring_map(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_ringtxcmpl_put: Adds new iocb to the txcmplq.
+ * lpfc_sli_ringtxcmpl_put - Adds new iocb to the txcmplq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to the driver iocb object.
@@ -370,7 +402,7 @@ lpfc_sli_ringtxcmpl_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
}
/**
- * lpfc_sli_ringtx_get: Get first element of the txq.
+ * lpfc_sli_ringtx_get - Get first element of the txq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
@@ -391,7 +423,7 @@ lpfc_sli_ringtx_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
}
/**
- * lpfc_sli_next_iocb_slot: Get next iocb slot in the ring.
+ * lpfc_sli_next_iocb_slot - Get next iocb slot in the ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
@@ -445,7 +477,7 @@ lpfc_sli_next_iocb_slot (struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
}
/**
- * lpfc_sli_next_iotag: Get an iotag for the iocb.
+ * lpfc_sli_next_iotag - Get an iotag for the iocb
* @phba: Pointer to HBA context object.
* @iocbq: Pointer to driver iocb object.
*
@@ -520,7 +552,7 @@ lpfc_sli_next_iotag(struct lpfc_hba *phba, struct lpfc_iocbq *iocbq)
}
/**
- * lpfc_sli_submit_iocb: Submit an iocb to the firmware.
+ * lpfc_sli_submit_iocb - Submit an iocb to the firmware
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @iocb: Pointer to iocb slot in the ring.
@@ -577,7 +609,7 @@ lpfc_sli_submit_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
}
/**
- * lpfc_sli_update_full_ring: Update the chip attention register.
+ * lpfc_sli_update_full_ring - Update the chip attention register
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
@@ -608,7 +640,7 @@ lpfc_sli_update_full_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
}
/**
- * lpfc_sli_update_ring: Update chip attention register.
+ * lpfc_sli_update_ring - Update chip attention register
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
@@ -632,7 +664,7 @@ lpfc_sli_update_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
}
/**
- * lpfc_sli_resume_iocb: Process iocbs in the txq.
+ * lpfc_sli_resume_iocb - Process iocbs in the txq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
@@ -672,7 +704,7 @@ lpfc_sli_resume_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
}
/**
- * lpfc_sli_next_hbq_slot: Get next hbq entry for the HBQ.
+ * lpfc_sli_next_hbq_slot - Get next hbq entry for the HBQ
* @phba: Pointer to HBA context object.
* @hbqno: HBQ number.
*
@@ -717,7 +749,7 @@ lpfc_sli_next_hbq_slot(struct lpfc_hba *phba, uint32_t hbqno)
}
/**
- * lpfc_sli_hbqbuf_free_all: Free all the hbq buffers.
+ * lpfc_sli_hbqbuf_free_all - Free all the hbq buffers
* @phba: Pointer to HBA context object.
*
* This function is called with no lock held to free all the
@@ -771,7 +803,7 @@ lpfc_sli_hbqbuf_free_all(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_hbq_to_firmware: Post the hbq buffer to firmware.
+ * lpfc_sli_hbq_to_firmware - Post the hbq buffer to firmware
* @phba: Pointer to HBA context object.
* @hbqno: HBQ number.
* @hbq_buf: Pointer to HBQ buffer.
@@ -818,8 +850,8 @@ static struct lpfc_hbq_init lpfc_els_hbq = {
.profile = 0,
.ring_mask = (1 << LPFC_ELS_RING),
.buffer_count = 0,
- .init_count = 20,
- .add_count = 5,
+ .init_count = 40,
+ .add_count = 40,
};
/* HBQ for the extra ring if needed */
@@ -841,7 +873,7 @@ struct lpfc_hbq_init *lpfc_hbq_defs[] = {
};
/**
- * lpfc_sli_hbqbuf_fill_hbqs: Post more hbq buffers to HBQ.
+ * lpfc_sli_hbqbuf_fill_hbqs - Post more hbq buffers to HBQ
* @phba: Pointer to HBA context object.
* @hbqno: HBQ number.
* @count: Number of HBQ buffers to be posted.
@@ -901,7 +933,7 @@ err:
}
/**
- * lpfc_sli_hbqbuf_add_hbqs: Post more HBQ buffers to firmware.
+ * lpfc_sli_hbqbuf_add_hbqs - Post more HBQ buffers to firmware
* @phba: Pointer to HBA context object.
* @qno: HBQ number.
*
@@ -917,7 +949,7 @@ lpfc_sli_hbqbuf_add_hbqs(struct lpfc_hba *phba, uint32_t qno)
}
/**
- * lpfc_sli_hbqbuf_init_hbqs: Post initial buffers to the HBQ.
+ * lpfc_sli_hbqbuf_init_hbqs - Post initial buffers to the HBQ
* @phba: Pointer to HBA context object.
* @qno: HBQ queue number.
*
@@ -933,7 +965,7 @@ lpfc_sli_hbqbuf_init_hbqs(struct lpfc_hba *phba, uint32_t qno)
}
/**
- * lpfc_sli_hbqbuf_find: Find the hbq buffer associated with a tag.
+ * lpfc_sli_hbqbuf_find - Find the hbq buffer associated with a tag
* @phba: Pointer to HBA context object.
* @tag: Tag of the hbq buffer.
*
@@ -966,7 +998,7 @@ lpfc_sli_hbqbuf_find(struct lpfc_hba *phba, uint32_t tag)
}
/**
- * lpfc_sli_free_hbq: Give back the hbq buffer to firmware.
+ * lpfc_sli_free_hbq - Give back the hbq buffer to firmware
* @phba: Pointer to HBA context object.
* @hbq_buffer: Pointer to HBQ buffer.
*
@@ -988,7 +1020,7 @@ lpfc_sli_free_hbq(struct lpfc_hba *phba, struct hbq_dmabuf *hbq_buffer)
}
/**
- * lpfc_sli_chk_mbx_command: Check if the mailbox is a legitimate mailbox.
+ * lpfc_sli_chk_mbx_command - Check if the mailbox is a legitimate mailbox
* @mbxCommand: mailbox command code.
*
* This function is called by the mailbox event handler function to verify
@@ -1064,8 +1096,7 @@ lpfc_sli_chk_mbx_command(uint8_t mbxCommand)
}
/**
- * lpfc_sli_wake_mbox_wait: Completion handler for mbox issued from
- * lpfc_sli_issue_mbox_wait.
+ * lpfc_sli_wake_mbox_wait - lpfc_sli_issue_mbox_wait mbox completion handler
* @phba: Pointer to HBA context object.
* @pmboxq: Pointer to mailbox command.
*
@@ -1096,7 +1127,7 @@ lpfc_sli_wake_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq)
/**
- * lpfc_sli_def_mbox_cmpl: Default mailbox completion handler.
+ * lpfc_sli_def_mbox_cmpl - Default mailbox completion handler
* @phba: Pointer to HBA context object.
* @pmb: Pointer to mailbox object.
*
@@ -1140,7 +1171,7 @@ lpfc_sli_def_mbox_cmpl(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmb)
}
/**
- * lpfc_sli_handle_mb_event: Handle mailbox completions from firmware.
+ * lpfc_sli_handle_mb_event - Handle mailbox completions from firmware
* @phba: Pointer to HBA context object.
*
* This function is called with no lock held. This function processes all
@@ -1260,7 +1291,7 @@ lpfc_sli_handle_mb_event(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_get_buff: Get the buffer associated with the buffer tag.
+ * lpfc_sli_get_buff - Get the buffer associated with the buffer tag
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @tag: buffer tag.
@@ -1288,7 +1319,7 @@ lpfc_sli_get_buff(struct lpfc_hba *phba,
/**
- * lpfc_sli_process_unsol_iocb: Unsolicited iocb handler.
+ * lpfc_sli_process_unsol_iocb - Unsolicited iocb handler
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @saveq: Pointer to the unsolicited iocb.
@@ -1484,7 +1515,7 @@ lpfc_sli_process_unsol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
}
/**
- * lpfc_sli_iocbq_lookup: Find command iocb for the given response iocb.
+ * lpfc_sli_iocbq_lookup - Find command iocb for the given response iocb
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @prspiocb: Pointer to response iocb object.
@@ -1521,7 +1552,7 @@ lpfc_sli_iocbq_lookup(struct lpfc_hba *phba,
}
/**
- * lpfc_sli_process_sol_iocb: process solicited iocb completion.
+ * lpfc_sli_process_sol_iocb - process solicited iocb completion
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @saveq: Pointer to the response iocb to be processed.
@@ -1597,7 +1628,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
* Ring <ringno> handler: unexpected completion IoTag
* <IoTag>
*/
- lpfc_printf_vlog(cmdiocbp->vport, KERN_WARNING, LOG_SLI,
+ lpfc_printf_log(phba, KERN_WARNING, LOG_SLI,
"0322 Ring %d handler: "
"unexpected completion IoTag x%x "
"Data: x%x x%x x%x x%x\n",
@@ -1614,7 +1645,7 @@ lpfc_sli_process_sol_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
}
/**
- * lpfc_sli_rsp_pointers_error: Response ring pointer error handler.
+ * lpfc_sli_rsp_pointers_error - Response ring pointer error handler
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
@@ -1652,7 +1683,7 @@ lpfc_sli_rsp_pointers_error(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
}
/**
- * lpfc_poll_eratt: Error attention polling timer timeout handler.
+ * lpfc_poll_eratt - Error attention polling timer timeout handler
* @ptr: Pointer to address of HBA context object.
*
* This function is invoked by the Error Attention polling timer when the
@@ -1682,7 +1713,7 @@ void lpfc_poll_eratt(unsigned long ptr)
}
/**
- * lpfc_sli_poll_fcp_ring: Handle FCP ring completion in polling mode.
+ * lpfc_sli_poll_fcp_ring - Handle FCP ring completion in polling mode
* @phba: Pointer to HBA context object.
*
* This function is called from lpfc_queuecommand, lpfc_poll_timeout,
@@ -1845,7 +1876,7 @@ void lpfc_sli_poll_fcp_ring(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_handle_fast_ring_event: Handle ring events on FCP ring.
+ * lpfc_sli_handle_fast_ring_event - Handle ring events on FCP ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @mask: Host attention register mask for this ring.
@@ -2037,7 +2068,7 @@ lpfc_sli_handle_fast_ring_event(struct lpfc_hba *phba,
}
/**
- * lpfc_sli_handle_slow_ring_event: Handle ring events for non-FCP rings.
+ * lpfc_sli_handle_slow_ring_event - Handle ring events for non-FCP rings
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @mask: Host attention register mask for this ring.
@@ -2311,7 +2342,7 @@ lpfc_sli_handle_slow_ring_event(struct lpfc_hba *phba,
}
/**
- * lpfc_sli_abort_iocb_ring: Abort all iocbs in the ring.
+ * lpfc_sli_abort_iocb_ring - Abort all iocbs in the ring
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
*
@@ -2325,7 +2356,6 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
{
LIST_HEAD(completions);
struct lpfc_iocbq *iocb, *next_iocb;
- IOCB_t *cmd = NULL;
if (pring->ringno == LPFC_ELS_RING) {
lpfc_fabric_abort_hba(phba);
@@ -2344,23 +2374,13 @@ lpfc_sli_abort_iocb_ring(struct lpfc_hba *phba, struct lpfc_sli_ring *pring)
spin_unlock_irq(&phba->hbalock);
- while (!list_empty(&completions)) {
- iocb = list_get_first(&completions, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_ABORTED;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_ABORTED);
}
/**
- * lpfc_sli_flush_fcp_rings: flush all iocbs in the fcp ring.
+ * lpfc_sli_flush_fcp_rings - flush all iocbs in the fcp ring
* @phba: Pointer to HBA context object.
*
* This function flushes all iocbs in the fcp ring and frees all the iocb
@@ -2374,8 +2394,6 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba)
{
LIST_HEAD(txq);
LIST_HEAD(txcmplq);
- struct lpfc_iocbq *iocb;
- IOCB_t *cmd = NULL;
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
@@ -2393,38 +2411,16 @@ lpfc_sli_flush_fcp_rings(struct lpfc_hba *phba)
spin_unlock_irq(&phba->hbalock);
/* Flush the txq */
- while (!list_empty(&txq)) {
- iocb = list_get_first(&txq, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_DOWN;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ lpfc_sli_cancel_iocbs(phba, &txq, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
/* Flush the txcmpq */
- while (!list_empty(&txcmplq)) {
- iocb = list_get_first(&txcmplq, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
- list_del_init(&iocb->list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_DOWN;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ lpfc_sli_cancel_iocbs(phba, &txcmplq, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
}
/**
- * lpfc_sli_brdready: Check for host status bits.
+ * lpfc_sli_brdready - Check for host status bits
* @phba: Pointer to HBA context object.
* @mask: Bit mask to be checked.
*
@@ -2484,7 +2480,7 @@ lpfc_sli_brdready(struct lpfc_hba *phba, uint32_t mask)
#define BARRIER_TEST_PATTERN (0xdeadbeef)
/**
- * lpfc_reset_barrier: Make HBA ready for HBA reset.
+ * lpfc_reset_barrier - Make HBA ready for HBA reset
* @phba: Pointer to HBA context object.
*
* This function is called before resetting an HBA. This
@@ -2564,7 +2560,7 @@ restore_hc:
}
/**
- * lpfc_sli_brdkill: Issue a kill_board mailbox command.
+ * lpfc_sli_brdkill - Issue a kill_board mailbox command
* @phba: Pointer to HBA context object.
*
* This function issues a kill_board mailbox command and waits for
@@ -2651,7 +2647,7 @@ lpfc_sli_brdkill(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_brdreset: Reset the HBA.
+ * lpfc_sli_brdreset - Reset the HBA
* @phba: Pointer to HBA context object.
*
* This function resets the HBA by writing HC_INITFF to the control
@@ -2714,7 +2710,7 @@ lpfc_sli_brdreset(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_brdrestart: Restart the HBA.
+ * lpfc_sli_brdrestart - Restart the HBA
* @phba: Pointer to HBA context object.
*
* This function is called in the SLI initialization code path to
@@ -2781,7 +2777,7 @@ lpfc_sli_brdrestart(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_chipset_init: Wait for the restart of the HBA after a restart.
+ * lpfc_sli_chipset_init - Wait for the restart of the HBA after a restart
* @phba: Pointer to HBA context object.
*
* This function is called after a HBA restart to wait for successful
@@ -2876,7 +2872,7 @@ lpfc_sli_chipset_init(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_hbq_count: Get the number of HBQs to be configured.
+ * lpfc_sli_hbq_count - Get the number of HBQs to be configured
*
* This function calculates and returns the number of HBQs required to be
* configured.
@@ -2888,7 +2884,7 @@ lpfc_sli_hbq_count(void)
}
/**
- * lpfc_sli_hbq_entry_count: Calculate total number of hbq entries.
+ * lpfc_sli_hbq_entry_count - Calculate total number of hbq entries
*
* This function adds the number of hbq entries in every HBQ to get
* the total number of hbq entries required for the HBA and returns
@@ -2907,7 +2903,7 @@ lpfc_sli_hbq_entry_count(void)
}
/**
- * lpfc_sli_hbq_size: Calculate memory required for all hbq entries.
+ * lpfc_sli_hbq_size - Calculate memory required for all hbq entries
*
* This function calculates amount of memory required for all hbq entries
* to be configured and returns the total memory required.
@@ -2919,7 +2915,7 @@ lpfc_sli_hbq_size(void)
}
/**
- * lpfc_sli_hbq_setup: configure and initialize HBQs.
+ * lpfc_sli_hbq_setup - configure and initialize HBQs
* @phba: Pointer to HBA context object.
*
* This function is called during the SLI initialization to configure
@@ -2988,7 +2984,7 @@ lpfc_sli_hbq_setup(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_config_port: Issue config port mailbox command.
+ * lpfc_sli_config_port - Issue config port mailbox command
* @phba: Pointer to HBA context object.
* @sli_mode: sli mode - 2/3
*
@@ -3114,7 +3110,7 @@ do_prep_failed:
/**
- * lpfc_sli_hba_setup: SLI intialization function.
+ * lpfc_sli_hba_setup - SLI intialization function
* @phba: Pointer to HBA context object.
*
* This function is the main SLI intialization function. This function
@@ -3206,7 +3202,7 @@ lpfc_sli_hba_setup_error:
/**
- * lpfc_mbox_timeout: Timeout call back function for mbox timer.
+ * lpfc_mbox_timeout - Timeout call back function for mbox timer
* @ptr: context object - pointer to hba structure.
*
* This is the callback function for mailbox timer. The mailbox
@@ -3237,7 +3233,7 @@ lpfc_mbox_timeout(unsigned long ptr)
/**
- * lpfc_mbox_timeout_handler: Worker thread function to handle mailbox timeout.
+ * lpfc_mbox_timeout_handler - Worker thread function to handle mailbox timeout
* @phba: Pointer to HBA context object.
*
* This function is called from worker thread when a mailbox command times out.
@@ -3252,6 +3248,21 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
struct lpfc_sli *psli = &phba->sli;
struct lpfc_sli_ring *pring;
+ /* Check the pmbox pointer first. There is a race condition
+ * between the mbox timeout handler getting executed in the
+ * worklist and the mailbox actually completing. When this
+ * race condition occurs, the mbox_active will be NULL.
+ */
+ spin_lock_irq(&phba->hbalock);
+ if (pmbox == NULL) {
+ lpfc_printf_log(phba, KERN_WARNING,
+ LOG_MBOX | LOG_SLI,
+ "0353 Active Mailbox cleared - mailbox timeout "
+ "exiting\n");
+ spin_unlock_irq(&phba->hbalock);
+ return;
+ }
+
/* Mbox cmd <mbxCommand> timeout */
lpfc_printf_log(phba, KERN_ERR, LOG_MBOX | LOG_SLI,
"0310 Mailbox command x%x timeout Data: x%x x%x x%p\n",
@@ -3259,6 +3270,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
phba->pport->port_state,
phba->sli.sli_flag,
phba->sli.mbox_active);
+ spin_unlock_irq(&phba->hbalock);
/* Setting state unknown so lpfc_sli_abort_iocb_ring
* would get IOCB_ERROR from lpfc_sli_issue_iocb, allowing
@@ -3295,7 +3307,7 @@ lpfc_mbox_timeout_handler(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_issue_mbox: Issue a mailbox command to firmware.
+ * lpfc_sli_issue_mbox - Issue a mailbox command to firmware
* @phba: Pointer to HBA context object.
* @pmbox: Pointer to mailbox object.
* @flag: Flag indicating how the mailbox need to be processed.
@@ -3365,6 +3377,12 @@ lpfc_sli_issue_mbox(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmbox, uint32_t flag)
goto out_not_finished;
}
+ /* If HBA has a deferred error attention, fail the iocb. */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irqrestore(&phba->hbalock, drvr_flag);
+ goto out_not_finished;
+ }
+
psli = &phba->sli;
mb = &pmbox->mb;
@@ -3632,7 +3650,7 @@ out_not_finished:
}
/**
- * __lpfc_sli_ringtx_put: Add an iocb to the txq.
+ * __lpfc_sli_ringtx_put - Add an iocb to the txq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to address of newly added command iocb.
@@ -3651,7 +3669,7 @@ __lpfc_sli_ringtx_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
}
/**
- * lpfc_sli_next_iocb: Get the next iocb in the txq.
+ * lpfc_sli_next_iocb - Get the next iocb in the txq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to address of newly added command iocb.
@@ -3683,7 +3701,7 @@ lpfc_sli_next_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
}
/**
- * __lpfc_sli_issue_iocb: Lockless version of lpfc_sli_issue_iocb.
+ * __lpfc_sli_issue_iocb - Lockless version of lpfc_sli_issue_iocb
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to command iocb.
@@ -3729,6 +3747,10 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
if (unlikely(pci_channel_offline(phba->pcidev)))
return IOCB_ERROR;
+ /* If HBA has a deferred error attention, fail the iocb. */
+ if (unlikely(phba->hba_flag & DEFER_ERATT))
+ return IOCB_ERROR;
+
/*
* We should never get an IOCB if we are in a < LINK_DOWN state
*/
@@ -3813,7 +3835,7 @@ __lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
/**
- * lpfc_sli_issue_iocb: Wrapper function for __lpfc_sli_issue_iocb.
+ * lpfc_sli_issue_iocb - Wrapper function for __lpfc_sli_issue_iocb
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @piocb: Pointer to command iocb.
@@ -3840,7 +3862,7 @@ lpfc_sli_issue_iocb(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
}
/**
- * lpfc_extra_ring_setup: Extra ring setup function.
+ * lpfc_extra_ring_setup - Extra ring setup function
* @phba: Pointer to HBA context object.
*
* This function is called while driver attaches with the
@@ -3886,7 +3908,7 @@ lpfc_extra_ring_setup( struct lpfc_hba *phba)
}
/**
- * lpfc_sli_async_event_handler: ASYNC iocb handler function.
+ * lpfc_sli_async_event_handler - ASYNC iocb handler function
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @iocbq: Pointer to iocb object.
@@ -3907,6 +3929,7 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba,
uint16_t temp;
struct temp_event temp_event_data;
struct Scsi_Host *shost;
+ uint32_t *iocb_w;
icmd = &iocbq->iocb;
evt_code = icmd->un.asyncstat.evt_code;
@@ -3914,13 +3937,23 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba,
if ((evt_code != ASYNC_TEMP_WARN) &&
(evt_code != ASYNC_TEMP_SAFE)) {
+ iocb_w = (uint32_t *) icmd;
lpfc_printf_log(phba,
KERN_ERR,
LOG_SLI,
"0346 Ring %d handler: unexpected ASYNC_STATUS"
- " evt_code 0x%x\n",
+ " evt_code 0x%x \n"
+ "W0 0x%08x W1 0x%08x W2 0x%08x W3 0x%08x\n"
+ "W4 0x%08x W5 0x%08x W6 0x%08x W7 0x%08x\n"
+ "W8 0x%08x W9 0x%08x W10 0x%08x W11 0x%08x\n"
+ "W12 0x%08x W13 0x%08x W14 0x%08x W15 0x%08x\n",
pring->ringno,
- icmd->un.asyncstat.evt_code);
+ icmd->un.asyncstat.evt_code,
+ iocb_w[0], iocb_w[1], iocb_w[2], iocb_w[3],
+ iocb_w[4], iocb_w[5], iocb_w[6], iocb_w[7],
+ iocb_w[8], iocb_w[9], iocb_w[10], iocb_w[11],
+ iocb_w[12], iocb_w[13], iocb_w[14], iocb_w[15]);
+
return;
}
temp_event_data.data = (uint32_t)temp;
@@ -3954,7 +3987,7 @@ lpfc_sli_async_event_handler(struct lpfc_hba * phba,
/**
- * lpfc_sli_setup: SLI ring setup function.
+ * lpfc_sli_setup - SLI ring setup function
* @phba: Pointer to HBA context object.
*
* lpfc_sli_setup sets up rings of the SLI interface with
@@ -4076,7 +4109,7 @@ lpfc_sli_setup(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_queue_setup: Queue initialization function.
+ * lpfc_sli_queue_setup - Queue initialization function
* @phba: Pointer to HBA context object.
*
* lpfc_sli_queue_setup sets up mailbox queues and iocb queues for each
@@ -4115,7 +4148,7 @@ lpfc_sli_queue_setup(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_host_down: Vport cleanup function.
+ * lpfc_sli_host_down - Vport cleanup function
* @vport: Pointer to virtual port object.
*
* lpfc_sli_host_down is called to clean up the resources
@@ -4179,22 +4212,14 @@ lpfc_sli_host_down(struct lpfc_vport *vport)
spin_unlock_irqrestore(&phba->hbalock, flags);
- while (!list_empty(&completions)) {
- list_remove_head(&completions, iocb, struct lpfc_iocbq, list);
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- iocb->iocb.ulpStatus = IOSTAT_LOCAL_REJECT;
- iocb->iocb.un.ulpWord[4] = IOERR_SLI_DOWN;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
return 1;
}
/**
- * lpfc_sli_hba_down: Resource cleanup function for the HBA.
+ * lpfc_sli_hba_down - Resource cleanup function for the HBA
* @phba: Pointer to HBA context object.
*
* This function cleans up all iocb, buffers, mailbox commands
@@ -4216,8 +4241,6 @@ lpfc_sli_hba_down(struct lpfc_hba *phba)
struct lpfc_sli_ring *pring;
struct lpfc_dmabuf *buf_ptr;
LPFC_MBOXQ_t *pmb;
- struct lpfc_iocbq *iocb;
- IOCB_t *cmd = NULL;
int i;
unsigned long flags = 0;
@@ -4245,18 +4268,9 @@ lpfc_sli_hba_down(struct lpfc_hba *phba)
}
spin_unlock_irqrestore(&phba->hbalock, flags);
- while (!list_empty(&completions)) {
- list_remove_head(&completions, iocb, struct lpfc_iocbq, list);
- cmd = &iocb->iocb;
-
- if (!iocb->iocb_cmpl)
- lpfc_sli_release_iocbq(phba, iocb);
- else {
- cmd->ulpStatus = IOSTAT_LOCAL_REJECT;
- cmd->un.ulpWord[4] = IOERR_SLI_DOWN;
- (iocb->iocb_cmpl) (phba, iocb, iocb);
- }
- }
+ /* Cancel all the IOCBs from the completions list */
+ lpfc_sli_cancel_iocbs(phba, &completions, IOSTAT_LOCAL_REJECT,
+ IOERR_SLI_DOWN);
spin_lock_irqsave(&phba->hbalock, flags);
list_splice_init(&phba->elsbuf, &completions);
@@ -4299,7 +4313,7 @@ lpfc_sli_hba_down(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_pcimem_bcopy: SLI memory copy function.
+ * lpfc_sli_pcimem_bcopy - SLI memory copy function
* @srcp: Source memory pointer.
* @destp: Destination memory pointer.
* @cnt: Number of words required to be copied.
@@ -4329,7 +4343,7 @@ lpfc_sli_pcimem_bcopy(void *srcp, void *destp, uint32_t cnt)
/**
- * lpfc_sli_ringpostbuf_put: Function to add a buffer to postbufq.
+ * lpfc_sli_ringpostbuf_put - Function to add a buffer to postbufq
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @mp: Pointer to driver buffer object.
@@ -4352,8 +4366,7 @@ lpfc_sli_ringpostbuf_put(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
}
/**
- * lpfc_sli_get_buffer_tag: Tag allocation function for a buffer posted
- * using CMD_QUE_XRI64_CX iocb.
+ * lpfc_sli_get_buffer_tag - allocates a tag for a CMD_QUE_XRI64_CX buffer
* @phba: Pointer to HBA context object.
*
* When HBQ is enabled, buffers are searched based on tags. This function
@@ -4378,8 +4391,7 @@ lpfc_sli_get_buffer_tag(struct lpfc_hba *phba)
}
/**
- * lpfc_sli_ring_taggedbuf_get: Search HBQ buffer associated with
- * posted using CMD_QUE_XRI64_CX iocb.
+ * lpfc_sli_ring_taggedbuf_get - find HBQ buffer associated with given tag
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @tag: Buffer tag.
@@ -4422,8 +4434,7 @@ lpfc_sli_ring_taggedbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
}
/**
- * lpfc_sli_ringpostbuf_get: SLI2 buffer search function for
- * unsolicited ct and els events.
+ * lpfc_sli_ringpostbuf_get - search buffers for unsolicited CT and ELS events
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @phys: DMA address of the buffer.
@@ -4466,7 +4477,7 @@ lpfc_sli_ringpostbuf_get(struct lpfc_hba *phba, struct lpfc_sli_ring *pring,
}
/**
- * lpfc_sli_abort_els_cmpl: Completion handler for the els abort iocbs.
+ * lpfc_sli_abort_els_cmpl - Completion handler for the els abort iocbs
* @phba: Pointer to HBA context object.
* @cmdiocb: Pointer to driver command iocb object.
* @rspiocb: Pointer to driver response iocb object.
@@ -4542,7 +4553,7 @@ lpfc_sli_abort_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
}
/**
- * lpfc_ignore_els_cmpl: Completion handler for aborted ELS command.
+ * lpfc_ignore_els_cmpl - Completion handler for aborted ELS command
* @phba: Pointer to HBA context object.
* @cmdiocb: Pointer to driver command iocb object.
* @rspiocb: Pointer to driver response iocb object.
@@ -4572,7 +4583,7 @@ lpfc_ignore_els_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
}
/**
- * lpfc_sli_issue_abort_iotag: Abort function for a command iocb.
+ * lpfc_sli_issue_abort_iotag - Abort function for a command iocb
* @phba: Pointer to HBA context object.
* @pring: Pointer to driver SLI ring object.
* @cmdiocb: Pointer to driver command iocb object.
@@ -4658,15 +4669,14 @@ abort_iotag_exit:
}
/**
- * lpfc_sli_validate_fcp_iocb: Filtering function, used to find commands
- * associated with a vport/SCSI target/lun.
+ * lpfc_sli_validate_fcp_iocb - find commands associated with a vport or LUN
* @iocbq: Pointer to driver iocb object.
* @vport: Pointer to driver virtual port object.
* @tgt_id: SCSI ID of the target.
* @lun_id: LUN ID of the scsi device.
* @ctx_cmd: LPFC_CTX_LUN/LPFC_CTX_TGT/LPFC_CTX_HOST
*
- * This function acts as iocb filter for functions which abort or count
+ * This function acts as an iocb filter for functions which abort or count
* all FCP iocbs pending on a lun/SCSI target/SCSI host. It will return
* 0 if the filtering criteria is met for the given iocb and will return
* 1 if the filtering criteria is not met.
@@ -4724,7 +4734,7 @@ lpfc_sli_validate_fcp_iocb(struct lpfc_iocbq *iocbq, struct lpfc_vport *vport,
}
/**
- * lpfc_sli_sum_iocb: Function to count the number of FCP iocbs pending.
+ * lpfc_sli_sum_iocb - Function to count the number of FCP iocbs pending
* @vport: Pointer to virtual port.
* @tgt_id: SCSI ID of the target.
* @lun_id: LUN ID of the scsi device.
@@ -4762,8 +4772,7 @@ lpfc_sli_sum_iocb(struct lpfc_vport *vport, uint16_t tgt_id, uint64_t lun_id,
}
/**
- * lpfc_sli_abort_fcp_cmpl: Completion handler function for an aborted
- * FCP iocb.
+ * lpfc_sli_abort_fcp_cmpl - Completion handler function for aborted FCP IOCBs
* @phba: Pointer to HBA context object
* @cmdiocb: Pointer to command iocb object.
* @rspiocb: Pointer to response iocb object.
@@ -4781,8 +4790,7 @@ lpfc_sli_abort_fcp_cmpl(struct lpfc_hba *phba, struct lpfc_iocbq *cmdiocb,
}
/**
- * lpfc_sli_abort_iocb: This function issue abort for all SCSI commands
- * pending on a SCSI host(vport)/target/lun.
+ * lpfc_sli_abort_iocb - issue abort for all commands on a host/target/LUN
* @vport: Pointer to virtual port.
* @pring: Pointer to driver SLI ring object.
* @tgt_id: SCSI ID of the target.
@@ -4854,8 +4862,7 @@ lpfc_sli_abort_iocb(struct lpfc_vport *vport, struct lpfc_sli_ring *pring,
}
/**
- * lpfc_sli_wake_iocb_wait: iocb completion handler for iocb issued using
- * lpfc_sli_issue_iocb_wait.
+ * lpfc_sli_wake_iocb_wait - lpfc_sli_issue_iocb_wait's completion handler
* @phba: Pointer to HBA context object.
* @cmdiocbq: Pointer to command iocb.
* @rspiocbq: Pointer to response iocb.
@@ -4893,7 +4900,7 @@ lpfc_sli_wake_iocb_wait(struct lpfc_hba *phba,
}
/**
- * lpfc_sli_issue_iocb_wait: Synchronous function to issue iocb commands.
+ * lpfc_sli_issue_iocb_wait - Synchronous function to issue iocb commands
* @phba: Pointer to HBA context object..
* @pring: Pointer to sli ring.
* @piocb: Pointer to command iocb.
@@ -5000,7 +5007,7 @@ lpfc_sli_issue_iocb_wait(struct lpfc_hba *phba,
}
/**
- * lpfc_sli_issue_mbox_wait: Synchronous function to issue mailbox.
+ * lpfc_sli_issue_mbox_wait - Synchronous function to issue mailbox
* @phba: Pointer to HBA context object.
* @pmboxq: Pointer to driver mailbox object.
* @timeout: Timeout in number of seconds.
@@ -5070,7 +5077,7 @@ lpfc_sli_issue_mbox_wait(struct lpfc_hba *phba, LPFC_MBOXQ_t *pmboxq,
}
/**
- * lpfc_sli_flush_mbox_queue: mailbox queue cleanup function.
+ * lpfc_sli_flush_mbox_queue - mailbox queue cleanup function
* @phba: Pointer to HBA context.
*
* This function is called to cleanup any pending mailbox
@@ -5113,7 +5120,7 @@ lpfc_sli_flush_mbox_queue(struct lpfc_hba * phba)
}
/**
- * lpfc_sli_check_eratt: check error attention events
+ * lpfc_sli_check_eratt - check error attention events
* @phba: Pointer to HBA context.
*
* This function is called form timer soft interrupt context to check HBA's
@@ -5145,11 +5152,31 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba)
return 0;
}
+ /*
+ * If there is deferred error attention, do not check for error
+ * attention
+ */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irq(&phba->hbalock);
+ return 0;
+ }
+
/* Read chip Host Attention (HA) register */
ha_copy = readl(phba->HAregaddr);
if (ha_copy & HA_ERATT) {
/* Read host status register to retrieve error event */
lpfc_sli_read_hs(phba);
+
+ /* Check if there is a deferred error condition is active */
+ if ((HS_FFER1 & phba->work_hs) &&
+ ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
+ HS_FFER6 | HS_FFER7) & phba->work_hs)) {
+ phba->hba_flag |= DEFER_ERATT;
+ /* Clear all interrupt enable conditions */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr);
+ }
+
/* Set the driver HA work bitmap */
phba->work_ha |= HA_ERATT;
/* Indicate polling handles this ERATT */
@@ -5162,7 +5189,7 @@ lpfc_sli_check_eratt(struct lpfc_hba *phba)
}
/**
- * lpfc_sp_intr_handler: The slow-path interrupt handler of lpfc driver.
+ * lpfc_sp_intr_handler - The slow-path interrupt handler of lpfc driver
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
@@ -5238,6 +5265,16 @@ lpfc_sp_intr_handler(int irq, void *dev_id)
/* Indicate interrupt handler handles ERATT */
phba->hba_flag |= HBA_ERATT_HANDLED;
}
+
+ /*
+ * If there is deferred error attention, do not check for any
+ * interrupt.
+ */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irq(&phba->hbalock);
+ return IRQ_NONE;
+ }
+
/* Clear up only attention source related to slow-path */
writel((ha_copy & (HA_MBATT | HA_R2_CLR_MSK)),
phba->HAregaddr);
@@ -5309,8 +5346,22 @@ lpfc_sp_intr_handler(int irq, void *dev_id)
}
}
spin_lock_irqsave(&phba->hbalock, iflag);
- if (work_ha_copy & HA_ERATT)
+ if (work_ha_copy & HA_ERATT) {
lpfc_sli_read_hs(phba);
+ /*
+ * Check if there is a deferred error condition
+ * is active
+ */
+ if ((HS_FFER1 & phba->work_hs) &&
+ ((HS_FFER2 | HS_FFER3 | HS_FFER4 | HS_FFER5 |
+ HS_FFER6 | HS_FFER7) & phba->work_hs)) {
+ phba->hba_flag |= DEFER_ERATT;
+ /* Clear all interrupt enable conditions */
+ writel(0, phba->HCregaddr);
+ readl(phba->HCregaddr);
+ }
+ }
+
if ((work_ha_copy & HA_MBATT) && (phba->sli.mbox_active)) {
pmb = phba->sli.mbox_active;
pmbox = &pmb->mb;
@@ -5423,7 +5474,7 @@ send_current_mbox:
} /* lpfc_sp_intr_handler */
/**
- * lpfc_fp_intr_handler: The fast-path interrupt handler of lpfc driver.
+ * lpfc_fp_intr_handler - The fast-path interrupt handler of lpfc driver
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
@@ -5474,6 +5525,14 @@ lpfc_fp_intr_handler(int irq, void *dev_id)
ha_copy = readl(phba->HAregaddr);
/* Clear up only attention source related to fast-path */
spin_lock_irqsave(&phba->hbalock, iflag);
+ /*
+ * If there is deferred error attention, do not check for
+ * any interrupt.
+ */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irq(&phba->hbalock);
+ return IRQ_NONE;
+ }
writel((ha_copy & (HA_R0_CLR_MSK | HA_R1_CLR_MSK)),
phba->HAregaddr);
readl(phba->HAregaddr); /* flush */
@@ -5510,7 +5569,7 @@ lpfc_fp_intr_handler(int irq, void *dev_id)
} /* lpfc_fp_intr_handler */
/**
- * lpfc_intr_handler: The device-level interrupt handler of lpfc driver.
+ * lpfc_intr_handler - The device-level interrupt handler of lpfc driver
* @irq: Interrupt number.
* @dev_id: The device context pointer.
*
@@ -5566,6 +5625,14 @@ lpfc_intr_handler(int irq, void *dev_id)
phba->hba_flag |= HBA_ERATT_HANDLED;
}
+ /*
+ * If there is deferred error attention, do not check for any interrupt.
+ */
+ if (unlikely(phba->hba_flag & DEFER_ERATT)) {
+ spin_unlock_irq(&phba->hbalock);
+ return IRQ_NONE;
+ }
+
/* Clear attention sources except link and error attentions */
writel((phba->ha_copy & ~(HA_LATT | HA_ERATT)), phba->HAregaddr);
readl(phba->HAregaddr); /* flush */
diff --git a/drivers/scsi/lpfc/lpfc_version.h b/drivers/scsi/lpfc/lpfc_version.h
index 7e32e95c539..e599519e307 100644
--- a/drivers/scsi/lpfc/lpfc_version.h
+++ b/drivers/scsi/lpfc/lpfc_version.h
@@ -1,7 +1,7 @@
/*******************************************************************
* This file is part of the Emulex Linux Device Driver for *
* Fibre Channel Host Bus Adapters. *
- * Copyright (C) 2004-2008 Emulex. All rights reserved. *
+ * Copyright (C) 2004-2009 Emulex. All rights reserved. *
* EMULEX and SLI are trademarks of Emulex. *
* www.emulex.com *
* *
@@ -18,7 +18,7 @@
* included with this package. *
*******************************************************************/
-#define LPFC_DRIVER_VERSION "8.3.0"
+#define LPFC_DRIVER_VERSION "8.3.1"
#define LPFC_DRIVER_NAME "lpfc"
#define LPFC_SP_DRIVER_HANDLER_NAME "lpfc:sp"
@@ -26,4 +26,4 @@
#define LPFC_MODULE_DESC "Emulex LightPulse Fibre Channel SCSI driver " \
LPFC_DRIVER_VERSION
-#define LPFC_COPYRIGHT "Copyright(c) 2004-2008 Emulex. All rights reserved."
+#define LPFC_COPYRIGHT "Copyright(c) 2004-2009 Emulex. All rights reserved."
diff --git a/drivers/scsi/lpfc/lpfc_vport.c b/drivers/scsi/lpfc/lpfc_vport.c
index 63b54c66756..917ad56b0af 100644
--- a/drivers/scsi/lpfc/lpfc_vport.c
+++ b/drivers/scsi/lpfc/lpfc_vport.c
@@ -206,7 +206,7 @@ lpfc_unique_wwpn(struct lpfc_hba *phba, struct lpfc_vport *new_vport)
}
/**
- * lpfc_discovery_wait: Wait for driver discovery to quiesce.
+ * lpfc_discovery_wait - Wait for driver discovery to quiesce
* @vport: The virtual port for which this call is being executed.
*
* This driver calls this routine specifically from lpfc_vport_delete
@@ -741,7 +741,7 @@ lpfc_destroy_vport_work_array(struct lpfc_hba *phba, struct lpfc_vport **vports)
/**
- * lpfc_vport_reset_stat_data: Reset the statistical data for the vport.
+ * lpfc_vport_reset_stat_data - Reset the statistical data for the vport
* @vport: Pointer to vport object.
*
* This function resets the statistical data for the vport. This function
@@ -763,8 +763,7 @@ lpfc_vport_reset_stat_data(struct lpfc_vport *vport)
/**
- * lpfc_alloc_bucket: Allocate data buffer required for collecting
- * statistical data.
+ * lpfc_alloc_bucket - Allocate data buffer required for statistical data
* @vport: Pointer to vport object.
*
* This function allocates data buffer required for all the FC
@@ -797,8 +796,7 @@ lpfc_alloc_bucket(struct lpfc_vport *vport)
}
/**
- * lpfc_free_bucket: Free data buffer required for collecting
- * statistical data.
+ * lpfc_free_bucket - Free data buffer required for statistical data
* @vport: Pointer to vport object.
*
* Th function frees statistical data buffer of all the FC
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.c b/drivers/scsi/mpt2sas/mpt2sas_base.c
index a91f5143cea..f3da592f7bc 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.c
@@ -636,6 +636,14 @@ _base_unmask_interrupts(struct MPT2SAS_ADAPTER *ioc)
static irqreturn_t
_base_interrupt(int irq, void *bus_id)
{
+ union reply_descriptor {
+ u64 word;
+ struct {
+ u32 low;
+ u32 high;
+ } u;
+ };
+ union reply_descriptor rd;
u32 post_index, post_index_next, completed_cmds;
u8 request_desript_type;
u16 smid;
@@ -656,7 +664,8 @@ _base_interrupt(int irq, void *bus_id)
completed_cmds = 0;
do {
- if (ioc->reply_post_free[post_index].Words == ~0ULL)
+ rd.word = ioc->reply_post_free[post_index].Words;
+ if (rd.u.low == UINT_MAX || rd.u.high == UINT_MAX)
goto out;
reply = 0;
cb_idx = 0xFF;
@@ -721,7 +730,7 @@ _base_interrupt(int irq, void *bus_id)
for (i = 0 ; i < completed_cmds; i++) {
post_index = post_index_next;
/* poison the reply post descriptor */
- ioc->reply_post_free[post_index_next].Words = ~0ULL;
+ ioc->reply_post_free[post_index_next].Words = ULLONG_MAX;
post_index_next = (post_index ==
(ioc->reply_post_queue_depth - 1))
? 0 : post_index + 1;
@@ -1387,6 +1396,64 @@ mpt2sas_base_put_smid_target_assist(struct MPT2SAS_ADAPTER *ioc, u16 smid,
}
/**
+ * _base_display_dell_branding - Disply branding string
+ * @ioc: per adapter object
+ *
+ * Return nothing.
+ */
+static void
+_base_display_dell_branding(struct MPT2SAS_ADAPTER *ioc)
+{
+ char dell_branding[MPT2SAS_DELL_BRANDING_SIZE];
+
+ if (ioc->pdev->subsystem_vendor != PCI_VENDOR_ID_DELL)
+ return;
+
+ memset(dell_branding, 0, MPT2SAS_DELL_BRANDING_SIZE);
+ switch (ioc->pdev->subsystem_device) {
+ case MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID:
+ strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID:
+ strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID:
+ strncpy(dell_branding,
+ MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_MODULAR_SSDID:
+ strncpy(dell_branding,
+ MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID:
+ strncpy(dell_branding,
+ MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_PERC_H200_SSDID:
+ strncpy(dell_branding, MPT2SAS_DELL_PERC_H200_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ case MPT2SAS_DELL_6GBPS_SAS_SSDID:
+ strncpy(dell_branding, MPT2SAS_DELL_6GBPS_SAS_BRANDING,
+ MPT2SAS_DELL_BRANDING_SIZE - 1);
+ break;
+ default:
+ sprintf(dell_branding, "0x%4X", ioc->pdev->subsystem_device);
+ break;
+ }
+
+ printk(MPT2SAS_INFO_FMT "%s: Vendor(0x%04X), Device(0x%04X),"
+ " SSVID(0x%04X), SSDID(0x%04X)\n", ioc->name, dell_branding,
+ ioc->pdev->vendor, ioc->pdev->device, ioc->pdev->subsystem_vendor,
+ ioc->pdev->subsystem_device);
+}
+
+/**
* _base_display_ioc_capabilities - Disply IOC's capabilities.
* @ioc: per adapter object
*
@@ -1427,6 +1494,8 @@ _base_display_ioc_capabilities(struct MPT2SAS_ADAPTER *ioc)
i++;
}
+ _base_display_dell_branding(ioc);
+
i = 0;
printk("), ");
printk("Capabilities=(");
@@ -3068,7 +3137,7 @@ _base_make_ioc_operational(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
/* initialize Reply Post Free Queue */
for (i = 0; i < ioc->reply_post_queue_depth; i++)
- ioc->reply_post_free[i].Words = ~0ULL;
+ ioc->reply_post_free[i].Words = ULLONG_MAX;
r = _base_send_ioc_init(ioc, VF_ID, sleep_flag);
if (r)
diff --git a/drivers/scsi/mpt2sas/mpt2sas_base.h b/drivers/scsi/mpt2sas/mpt2sas_base.h
index 6945ff4d382..36b1d1052ba 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_base.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_base.h
@@ -68,11 +68,11 @@
#define MPT2SAS_DRIVER_NAME "mpt2sas"
#define MPT2SAS_AUTHOR "LSI Corporation <DL-MPTFusionLinux@lsi.com>"
#define MPT2SAS_DESCRIPTION "LSI MPT Fusion SAS 2.0 Device Driver"
-#define MPT2SAS_DRIVER_VERSION "00.100.11.16"
-#define MPT2SAS_MAJOR_VERSION 00
+#define MPT2SAS_DRIVER_VERSION "01.100.02.00"
+#define MPT2SAS_MAJOR_VERSION 01
#define MPT2SAS_MINOR_VERSION 100
-#define MPT2SAS_BUILD_VERSION 11
-#define MPT2SAS_RELEASE_VERSION 16
+#define MPT2SAS_BUILD_VERSION 02
+#define MPT2SAS_RELEASE_VERSION 00
/*
* Set MPT2SAS_SG_DEPTH value based on user input.
@@ -130,6 +130,30 @@
#define MPT2SAS_ERR_FMT KERN_ERR MPT2SAS_FMT
/*
+ * Dell HBA branding
+ */
+#define MPT2SAS_DELL_BRANDING_SIZE 32
+
+#define MPT2SAS_DELL_6GBPS_SAS_HBA_BRANDING "Dell 6Gbps SAS HBA"
+#define MPT2SAS_DELL_PERC_H200_ADAPTER_BRANDING "Dell PERC H200 Adapter"
+#define MPT2SAS_DELL_PERC_H200_INTEGRATED_BRANDING "Dell PERC H200 Integrated"
+#define MPT2SAS_DELL_PERC_H200_MODULAR_BRANDING "Dell PERC H200 Modular"
+#define MPT2SAS_DELL_PERC_H200_EMBEDDED_BRANDING "Dell PERC H200 Embedded"
+#define MPT2SAS_DELL_PERC_H200_BRANDING "Dell PERC H200"
+#define MPT2SAS_DELL_6GBPS_SAS_BRANDING "Dell 6Gbps SAS"
+
+/*
+ * Dell HBA SSDIDs
+ */
+#define MPT2SAS_DELL_6GBPS_SAS_HBA_SSDID 0x1F1C
+#define MPT2SAS_DELL_PERC_H200_ADAPTER_SSDID 0x1F1D
+#define MPT2SAS_DELL_PERC_H200_INTEGRATED_SSDID 0x1F1E
+#define MPT2SAS_DELL_PERC_H200_MODULAR_SSDID 0x1F1F
+#define MPT2SAS_DELL_PERC_H200_EMBEDDED_SSDID 0x1F20
+#define MPT2SAS_DELL_PERC_H200_SSDID 0x1F21
+#define MPT2SAS_DELL_6GBPS_SAS_SSDID 0x1F22
+
+/*
* per target private data
*/
#define MPT_TARGET_FLAGS_RAID_COMPONENT 0x01
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.c b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
index 2d4f85c9d7a..ba6ab170bdf 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.c
@@ -64,6 +64,9 @@
static struct fasync_struct *async_queue;
static DECLARE_WAIT_QUEUE_HEAD(ctl_poll_wait);
+static int _ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type,
+ u8 *issue_reset);
+
/**
* enum block_state - blocking state
* @NON_BLOCKING: non blocking
@@ -378,10 +381,22 @@ _ctl_verify_adapter(int ioc_number, struct MPT2SAS_ADAPTER **iocpp)
void
mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
{
+ int i;
+ u8 issue_reset;
+
switch (reset_phase) {
case MPT2_IOC_PRE_RESET:
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
"MPT2_IOC_PRE_RESET\n", ioc->name, __func__));
+ for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
+ if (!(ioc->diag_buffer_status[i] &
+ MPT2_DIAG_BUFFER_IS_REGISTERED))
+ continue;
+ if ((ioc->diag_buffer_status[i] &
+ MPT2_DIAG_BUFFER_IS_RELEASED))
+ continue;
+ _ctl_send_release(ioc, i, &issue_reset);
+ }
break;
case MPT2_IOC_AFTER_RESET:
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
@@ -395,6 +410,17 @@ mpt2sas_ctl_reset_handler(struct MPT2SAS_ADAPTER *ioc, int reset_phase)
case MPT2_IOC_DONE_RESET:
dtmprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
"MPT2_IOC_DONE_RESET\n", ioc->name, __func__));
+
+ for (i = 0; i < MPI2_DIAG_BUF_TYPE_COUNT; i++) {
+ if (!(ioc->diag_buffer_status[i] &
+ MPT2_DIAG_BUFFER_IS_REGISTERED))
+ continue;
+ if ((ioc->diag_buffer_status[i] &
+ MPT2_DIAG_BUFFER_IS_RELEASED))
+ continue;
+ ioc->diag_buffer_status[i] |=
+ MPT2_DIAG_BUFFER_IS_DIAG_RESET;
+ }
break;
}
}
@@ -714,8 +740,10 @@ _ctl_do_mpt_command(struct MPT2SAS_ADAPTER *ioc,
if (tm_request->TaskType ==
MPI2_SCSITASKMGMT_TASKTYPE_ABORT_TASK) {
- if (_ctl_do_task_abort(ioc, &karg, tm_request))
+ if (_ctl_do_task_abort(ioc, &karg, tm_request)) {
+ mpt2sas_base_free_smid(ioc, smid);
goto out;
+ }
}
mutex_lock(&ioc->tm_cmds.mutex);
@@ -915,9 +943,9 @@ _ctl_getiocinfo(void __user *arg)
karg.pci_information.u.bits.function = PCI_FUNC(ioc->pdev->devfn);
karg.pci_information.segment_id = pci_domain_nr(ioc->pdev->bus);
karg.firmware_version = ioc->facts.FWVersion.Word;
- strncpy(karg.driver_version, MPT2SAS_DRIVER_VERSION,
- MPT2_IOCTL_VERSION_LENGTH);
- karg.driver_version[MPT2_IOCTL_VERSION_LENGTH - 1] = '\0';
+ strcpy(karg.driver_version, MPT2SAS_DRIVER_NAME);
+ strcat(karg.driver_version, "-");
+ strcat(karg.driver_version, MPT2SAS_DRIVER_VERSION);
karg.bios_version = le32_to_cpu(ioc->bios_pg3.BiosVersion);
if (copy_to_user(arg, &karg, sizeof(karg))) {
@@ -1551,81 +1579,38 @@ _ctl_diag_query(void __user *arg)
}
/**
- * _ctl_diag_release - request to send Diag Release Message to firmware
- * @arg - user space buffer containing ioctl content
- * @state - NON_BLOCKING or BLOCKING
+ * _ctl_send_release - Diag Release Message
+ * @ioc: per adapter object
+ * @buffer_type - specifies either TRACE or SNAPSHOT
+ * @issue_reset - specifies whether host reset is required.
*
- * This allows ownership of the specified buffer to returned to the driver,
- * allowing an application to read the buffer without fear that firmware is
- * overwritting information in the buffer.
*/
-static long
-_ctl_diag_release(void __user *arg, enum block_state state)
+static int
+_ctl_send_release(struct MPT2SAS_ADAPTER *ioc, u8 buffer_type, u8 *issue_reset)
{
- struct mpt2_diag_release karg;
- struct MPT2SAS_ADAPTER *ioc;
- void *request_data;
- int rc;
Mpi2DiagReleaseRequest_t *mpi_request;
Mpi2DiagReleaseReply_t *mpi_reply;
- u8 buffer_type;
- unsigned long timeleft;
u16 smid;
u16 ioc_status;
- u8 issue_reset = 0;
-
- if (copy_from_user(&karg, arg, sizeof(karg))) {
- printk(KERN_ERR "failure at %s:%d/%s()!\n",
- __FILE__, __LINE__, __func__);
- return -EFAULT;
- }
- if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
- return -ENODEV;
+ u32 ioc_state;
+ int rc;
+ unsigned long timeleft;
dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
__func__));
- buffer_type = karg.unique_id & 0x000000ff;
- if (!_ctl_diag_capability(ioc, buffer_type)) {
- printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
- "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
- return -EPERM;
- }
-
- if ((ioc->diag_buffer_status[buffer_type] &
- MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
- printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
- "registered\n", ioc->name, __func__, buffer_type);
- return -EINVAL;
- }
-
- if (karg.unique_id != ioc->unique_id[buffer_type]) {
- printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
- "registered\n", ioc->name, __func__, karg.unique_id);
- return -EINVAL;
- }
-
- if (ioc->diag_buffer_status[buffer_type] &
- MPT2_DIAG_BUFFER_IS_RELEASED) {
- printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
- "is already released\n", ioc->name, __func__,
- buffer_type);
- return 0;
- }
-
- request_data = ioc->diag_buffer[buffer_type];
+ rc = 0;
+ *issue_reset = 0;
- if (!request_data) {
- printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
- "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
- return -ENOMEM;
+ ioc_state = mpt2sas_base_get_iocstate(ioc, 1);
+ if (ioc_state != MPI2_IOC_STATE_OPERATIONAL) {
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s: "
+ "skipping due to FAULT state\n", ioc->name,
+ __func__));
+ rc = -EAGAIN;
+ goto out;
}
- if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
- return -EAGAIN;
- else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
- return -ERESTARTSYS;
-
if (ioc->ctl_cmds.status != MPT2_CMD_NOT_USED) {
printk(MPT2SAS_ERR_FMT "%s: ctl_cmd in use\n",
ioc->name, __func__);
@@ -1641,7 +1626,6 @@ _ctl_diag_release(void __user *arg, enum block_state state)
goto out;
}
- rc = 0;
ioc->ctl_cmds.status = MPT2_CMD_PENDING;
memset(ioc->ctl_cmds.reply, 0, ioc->reply_sz);
mpi_request = mpt2sas_base_get_msg_frame(ioc, smid);
@@ -1660,8 +1644,9 @@ _ctl_diag_release(void __user *arg, enum block_state state)
_debug_dump_mf(mpi_request,
sizeof(Mpi2DiagReleaseRequest_t)/4);
if (!(ioc->ctl_cmds.status & MPT2_CMD_RESET))
- issue_reset = 1;
- goto issue_host_reset;
+ *issue_reset = 1;
+ rc = -EFAULT;
+ goto out;
}
/* process the completed Reply Message Frame */
@@ -1687,14 +1672,101 @@ _ctl_diag_release(void __user *arg, enum block_state state)
rc = -EFAULT;
}
- issue_host_reset:
+ out:
+ ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
+ return rc;
+}
+
+/**
+ * _ctl_diag_release - request to send Diag Release Message to firmware
+ * @arg - user space buffer containing ioctl content
+ * @state - NON_BLOCKING or BLOCKING
+ *
+ * This allows ownership of the specified buffer to returned to the driver,
+ * allowing an application to read the buffer without fear that firmware is
+ * overwritting information in the buffer.
+ */
+static long
+_ctl_diag_release(void __user *arg, enum block_state state)
+{
+ struct mpt2_diag_release karg;
+ struct MPT2SAS_ADAPTER *ioc;
+ void *request_data;
+ int rc;
+ u8 buffer_type;
+ u8 issue_reset = 0;
+
+ if (copy_from_user(&karg, arg, sizeof(karg))) {
+ printk(KERN_ERR "failure at %s:%d/%s()!\n",
+ __FILE__, __LINE__, __func__);
+ return -EFAULT;
+ }
+ if (_ctl_verify_adapter(karg.hdr.ioc_number, &ioc) == -1 || !ioc)
+ return -ENODEV;
+
+ dctlprintk(ioc, printk(MPT2SAS_DEBUG_FMT "%s\n", ioc->name,
+ __func__));
+
+ buffer_type = karg.unique_id & 0x000000ff;
+ if (!_ctl_diag_capability(ioc, buffer_type)) {
+ printk(MPT2SAS_ERR_FMT "%s: doesn't have capability for "
+ "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
+ return -EPERM;
+ }
+
+ if ((ioc->diag_buffer_status[buffer_type] &
+ MPT2_DIAG_BUFFER_IS_REGISTERED) == 0) {
+ printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) is not "
+ "registered\n", ioc->name, __func__, buffer_type);
+ return -EINVAL;
+ }
+
+ if (karg.unique_id != ioc->unique_id[buffer_type]) {
+ printk(MPT2SAS_ERR_FMT "%s: unique_id(0x%08x) is not "
+ "registered\n", ioc->name, __func__, karg.unique_id);
+ return -EINVAL;
+ }
+
+ if (ioc->diag_buffer_status[buffer_type] &
+ MPT2_DIAG_BUFFER_IS_RELEASED) {
+ printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
+ "is already released\n", ioc->name, __func__,
+ buffer_type);
+ return 0;
+ }
+
+ request_data = ioc->diag_buffer[buffer_type];
+
+ if (!request_data) {
+ printk(MPT2SAS_ERR_FMT "%s: doesn't have memory allocated for "
+ "buffer_type(0x%02x)\n", ioc->name, __func__, buffer_type);
+ return -ENOMEM;
+ }
+
+ /* buffers were released by due to host reset */
+ if ((ioc->diag_buffer_status[buffer_type] &
+ MPT2_DIAG_BUFFER_IS_DIAG_RESET)) {
+ ioc->diag_buffer_status[buffer_type] |=
+ MPT2_DIAG_BUFFER_IS_RELEASED;
+ ioc->diag_buffer_status[buffer_type] &=
+ ~MPT2_DIAG_BUFFER_IS_DIAG_RESET;
+ printk(MPT2SAS_ERR_FMT "%s: buffer_type(0x%02x) "
+ "was released due to host reset\n", ioc->name, __func__,
+ buffer_type);
+ return 0;
+ }
+
+ if (state == NON_BLOCKING && !mutex_trylock(&ioc->ctl_cmds.mutex))
+ return -EAGAIN;
+ else if (mutex_lock_interruptible(&ioc->ctl_cmds.mutex))
+ return -ERESTARTSYS;
+
+ rc = _ctl_send_release(ioc, buffer_type, &issue_reset);
+
if (issue_reset)
mpt2sas_base_hard_reset_handler(ioc, CAN_SLEEP,
FORCE_BIG_HAMMER);
- out:
-
- ioc->ctl_cmds.status = MPT2_CMD_NOT_USED;
mutex_unlock(&ioc->ctl_cmds.mutex);
return rc;
}
diff --git a/drivers/scsi/mpt2sas/mpt2sas_ctl.h b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
index dbb6c0cf888..4da11435533 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_ctl.h
+++ b/drivers/scsi/mpt2sas/mpt2sas_ctl.h
@@ -50,7 +50,7 @@
#endif
#define MPT2SAS_DEV_NAME "mpt2ctl"
-#define MPT2_MAGIC_NUMBER 'm'
+#define MPT2_MAGIC_NUMBER 'L'
#define MPT2_IOCTL_DEFAULT_TIMEOUT (10) /* in seconds */
/**
@@ -295,8 +295,9 @@ struct mpt2_ioctl_btdh_mapping {
/* status bits for ioc->diag_buffer_status */
-#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01)
-#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02)
+#define MPT2_DIAG_BUFFER_IS_REGISTERED (0x01)
+#define MPT2_DIAG_BUFFER_IS_RELEASED (0x02)
+#define MPT2_DIAG_BUFFER_IS_DIAG_RESET (0x04)
/* application flags for mpt2_diag_register, mpt2_diag_query */
#define MPT2_APP_FLAGS_APP_OWNED (0x0001)
diff --git a/drivers/scsi/mpt2sas/mpt2sas_scsih.c b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
index 0c463c483c0..e3a7967259e 100644
--- a/drivers/scsi/mpt2sas/mpt2sas_scsih.c
+++ b/drivers/scsi/mpt2sas/mpt2sas_scsih.c
@@ -119,7 +119,7 @@ struct sense_info {
*/
struct fw_event_work {
struct list_head list;
- struct delayed_work work;
+ struct work_struct work;
struct MPT2SAS_ADAPTER *ioc;
u8 VF_ID;
u8 host_reset_handling;
@@ -516,12 +516,8 @@ _scsih_sas_device_add(struct MPT2SAS_ADAPTER *ioc,
handle = sas_device->handle;
parent_handle = sas_device->parent_handle;
sas_address = sas_device->sas_address;
- if (!mpt2sas_transport_port_add(ioc, handle, parent_handle)) {
+ if (!mpt2sas_transport_port_add(ioc, handle, parent_handle))
_scsih_sas_device_remove(ioc, sas_device);
- } else if (!sas_device->starget) {
- mpt2sas_transport_port_remove(ioc, sas_address, parent_handle);
- _scsih_sas_device_remove(ioc, sas_device);
- }
}
/**
@@ -1203,7 +1199,9 @@ scsih_target_destroy(struct scsi_target *starget)
rphy = dev_to_rphy(starget->dev.parent);
sas_device = mpt2sas_scsih_sas_device_find_by_sas_address(ioc,
rphy->identify.sas_address);
- if (sas_device)
+ if (sas_device && (sas_device->starget == starget) &&
+ (sas_device->id == starget->id) &&
+ (sas_device->channel == starget->channel))
sas_device->starget = NULL;
spin_unlock_irqrestore(&ioc->sas_device_lock, flags);
@@ -2009,8 +2007,8 @@ _scsih_fw_event_add(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work *fw_event)
spin_lock_irqsave(&ioc->fw_event_lock, flags);
list_add_tail(&fw_event->list, &ioc->fw_event_list);
- INIT_DELAYED_WORK(&fw_event->work, _firmware_event_work);
- queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, 1);
+ INIT_WORK(&fw_event->work, _firmware_event_work);
+ queue_work(ioc->firmware_event_thread, &fw_event->work);
spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
}
@@ -2054,7 +2052,7 @@ _scsih_fw_event_requeue(struct MPT2SAS_ADAPTER *ioc, struct fw_event_work
return;
spin_lock_irqsave(&ioc->fw_event_lock, flags);
- queue_delayed_work(ioc->firmware_event_thread, &fw_event->work, delay);
+ queue_work(ioc->firmware_event_thread, &fw_event->work);
spin_unlock_irqrestore(&ioc->fw_event_lock, flags);
}
@@ -2863,8 +2861,9 @@ scsih_io_done(struct MPT2SAS_ADAPTER *ioc, u16 smid, u8 VF_ID, u32 reply)
struct sense_info data;
const void *sense_data = mpt2sas_base_get_sense_buffer(ioc,
smid);
- memcpy(scmd->sense_buffer, sense_data,
+ u32 sz = min_t(u32, SCSI_SENSE_BUFFERSIZE,
le32_to_cpu(mpi_reply->SenseCount));
+ memcpy(scmd->sense_buffer, sense_data, sz);
_scsih_normalize_sense(scmd->sense_buffer, &data);
/* failure prediction threshold exceeded */
if (data.asc == 0x5D)
@@ -3923,7 +3922,7 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
mpt2sas_scsih_issue_tm(ioc, handle, lun,
MPI2_SCSITASKMGMT_TASKTYPE_QUERY_TASK, smid, 30);
- termination_count += le32_to_cpu(mpi_reply->TerminationCount);
+ ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
if ((mpi_reply->IOCStatus == MPI2_IOCSTATUS_SUCCESS) &&
(mpi_reply->ResponseCode ==
@@ -3933,10 +3932,10 @@ _scsih_sas_broadcast_primative_event(struct MPT2SAS_ADAPTER *ioc, u8 VF_ID,
continue;
mpt2sas_scsih_issue_tm(ioc, handle, lun,
- MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, smid, 30);
+ MPI2_SCSITASKMGMT_TASKTYPE_ABRT_TASK_SET, 0, 30);
+ ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
termination_count += le32_to_cpu(mpi_reply->TerminationCount);
}
- ioc->tm_cmds.status = MPT2_CMD_NOT_USED;
ioc->broadcast_aen_busy = 0;
mutex_unlock(&ioc->tm_cmds.mutex);
@@ -4962,7 +4961,7 @@ static void
_firmware_event_work(struct work_struct *work)
{
struct fw_event_work *fw_event = container_of(work,
- struct fw_event_work, work.work);
+ struct fw_event_work, work);
unsigned long flags;
struct MPT2SAS_ADAPTER *ioc = fw_event->ioc;
diff --git a/drivers/scsi/osd/osd_initiator.c b/drivers/scsi/osd/osd_initiator.c
index 2a5f0777148..1ce6b24abab 100644
--- a/drivers/scsi/osd/osd_initiator.c
+++ b/drivers/scsi/osd/osd_initiator.c
@@ -205,6 +205,74 @@ static unsigned _osd_req_alist_elem_size(struct osd_request *or, unsigned len)
osdv2_attr_list_elem_size(len);
}
+static void _osd_req_alist_elem_encode(struct osd_request *or,
+ void *attr_last, const struct osd_attr *oa)
+{
+ if (osd_req_is_ver1(or)) {
+ struct osdv1_attributes_list_element *attr = attr_last;
+
+ attr->attr_page = cpu_to_be32(oa->attr_page);
+ attr->attr_id = cpu_to_be32(oa->attr_id);
+ attr->attr_bytes = cpu_to_be16(oa->len);
+ memcpy(attr->attr_val, oa->val_ptr, oa->len);
+ } else {
+ struct osdv2_attributes_list_element *attr = attr_last;
+
+ attr->attr_page = cpu_to_be32(oa->attr_page);
+ attr->attr_id = cpu_to_be32(oa->attr_id);
+ attr->attr_bytes = cpu_to_be16(oa->len);
+ memcpy(attr->attr_val, oa->val_ptr, oa->len);
+ }
+}
+
+static int _osd_req_alist_elem_decode(struct osd_request *or,
+ void *cur_p, struct osd_attr *oa, unsigned max_bytes)
+{
+ unsigned inc;
+ if (osd_req_is_ver1(or)) {
+ struct osdv1_attributes_list_element *attr = cur_p;
+
+ if (max_bytes < sizeof(*attr))
+ return -1;
+
+ oa->len = be16_to_cpu(attr->attr_bytes);
+ inc = _osd_req_alist_elem_size(or, oa->len);
+ if (inc > max_bytes)
+ return -1;
+
+ oa->attr_page = be32_to_cpu(attr->attr_page);
+ oa->attr_id = be32_to_cpu(attr->attr_id);
+
+ /* OSD1: On empty attributes we return a pointer to 2 bytes
+ * of zeros. This keeps similar behaviour with OSD2.
+ * (See below)
+ */
+ oa->val_ptr = likely(oa->len) ? attr->attr_val :
+ (u8 *)&attr->attr_bytes;
+ } else {
+ struct osdv2_attributes_list_element *attr = cur_p;
+
+ if (max_bytes < sizeof(*attr))
+ return -1;
+
+ oa->len = be16_to_cpu(attr->attr_bytes);
+ inc = _osd_req_alist_elem_size(or, oa->len);
+ if (inc > max_bytes)
+ return -1;
+
+ oa->attr_page = be32_to_cpu(attr->attr_page);
+ oa->attr_id = be32_to_cpu(attr->attr_id);
+
+ /* OSD2: For convenience, on empty attributes, we return 8 bytes
+ * of zeros here. This keeps the same behaviour with OSD2r04,
+ * and is nice with null terminating ASCII fields.
+ * oa->val_ptr == NULL marks the end-of-list, or error.
+ */
+ oa->val_ptr = likely(oa->len) ? attr->attr_val : attr->reserved;
+ }
+ return inc;
+}
+
static unsigned _osd_req_alist_size(struct osd_request *or, void *list_head)
{
return osd_req_is_ver1(or) ?
@@ -282,9 +350,9 @@ _osd_req_sec_params(struct osd_request *or)
struct osd_cdb *ocdb = &or->cdb;
if (osd_req_is_ver1(or))
- return &ocdb->v1.sec_params;
+ return (struct osd_security_parameters *)&ocdb->v1.sec_params;
else
- return &ocdb->v2.sec_params;
+ return (struct osd_security_parameters *)&ocdb->v2.sec_params;
}
void osd_dev_init(struct osd_dev *osdd, struct scsi_device *scsi_device)
@@ -612,9 +680,9 @@ static int _osd_req_list_objects(struct osd_request *or,
WARN_ON(or->in.bio);
bio = bio_map_kern(q, list, len, or->alloc_flags);
- if (!bio) {
+ if (IS_ERR(bio)) {
OSD_ERR("!!! Failed to allocate list_objects BIO\n");
- return -ENOMEM;
+ return PTR_ERR(bio);
}
bio->bi_rw &= ~(1 << BIO_RW);
@@ -798,7 +866,6 @@ int osd_req_add_set_attr_list(struct osd_request *or,
attr_last = or->set_attr.buff + total_bytes;
for (; nelem; --nelem) {
- struct osd_attributes_list_element *attr;
unsigned elem_size = _osd_req_alist_elem_size(or, oa->len);
total_bytes += elem_size;
@@ -811,11 +878,7 @@ int osd_req_add_set_attr_list(struct osd_request *or,
or->set_attr.buff + or->set_attr.total_bytes;
}
- attr = attr_last;
- attr->attr_page = cpu_to_be32(oa->attr_page);
- attr->attr_id = cpu_to_be32(oa->attr_id);
- attr->attr_bytes = cpu_to_be16(oa->len);
- memcpy(attr->attr_val, oa->val_ptr, oa->len);
+ _osd_req_alist_elem_encode(or, attr_last, oa);
attr_last += elem_size;
++oa;
@@ -1070,15 +1133,10 @@ int osd_req_decode_get_attr_list(struct osd_request *or,
}
for (n = 0; (n < *nelem) && (cur_bytes < returned_bytes); ++n) {
- struct osd_attributes_list_element *attr = cur_p;
- unsigned inc;
+ int inc = _osd_req_alist_elem_decode(or, cur_p, oa,
+ returned_bytes - cur_bytes);
- oa->len = be16_to_cpu(attr->attr_bytes);
- inc = _osd_req_alist_elem_size(or, oa->len);
- OSD_DEBUG("oa->len=%d inc=%d cur_bytes=%d\n",
- oa->len, inc, cur_bytes);
- cur_bytes += inc;
- if (cur_bytes > returned_bytes) {
+ if (inc < 0) {
OSD_ERR("BAD FOOD from target. list not valid!"
"c=%d r=%d n=%d\n",
cur_bytes, returned_bytes, n);
@@ -1086,10 +1144,7 @@ int osd_req_decode_get_attr_list(struct osd_request *or,
break;
}
- oa->attr_page = be32_to_cpu(attr->attr_page);
- oa->attr_id = be32_to_cpu(attr->attr_id);
- oa->val_ptr = attr->attr_val;
-
+ cur_bytes += inc;
cur_p += inc;
++oa;
}
@@ -1159,6 +1214,24 @@ static int _osd_req_finalize_attr_page(struct osd_request *or)
return ret;
}
+static inline void osd_sec_parms_set_out_offset(bool is_v1,
+ struct osd_security_parameters *sec_parms, osd_cdb_offset offset)
+{
+ if (is_v1)
+ sec_parms->v1.data_out_integrity_check_offset = offset;
+ else
+ sec_parms->v2.data_out_integrity_check_offset = offset;
+}
+
+static inline void osd_sec_parms_set_in_offset(bool is_v1,
+ struct osd_security_parameters *sec_parms, osd_cdb_offset offset)
+{
+ if (is_v1)
+ sec_parms->v1.data_in_integrity_check_offset = offset;
+ else
+ sec_parms->v2.data_in_integrity_check_offset = offset;
+}
+
static int _osd_req_finalize_data_integrity(struct osd_request *or,
bool has_in, bool has_out, const u8 *cap_key)
{
@@ -1182,8 +1255,8 @@ static int _osd_req_finalize_data_integrity(struct osd_request *or,
or->out_data_integ.get_attributes_bytes = cpu_to_be64(
or->enc_get_attr.total_bytes);
- sec_parms->data_out_integrity_check_offset =
- osd_req_encode_offset(or, or->out.total_bytes, &pad);
+ osd_sec_parms_set_out_offset(osd_req_is_ver1(or), sec_parms,
+ osd_req_encode_offset(or, or->out.total_bytes, &pad));
ret = _req_append_segment(or, pad, &seg, or->out.last_seg,
&or->out);
@@ -1203,8 +1276,8 @@ static int _osd_req_finalize_data_integrity(struct osd_request *or,
};
unsigned pad;
- sec_parms->data_in_integrity_check_offset =
- osd_req_encode_offset(or, or->in.total_bytes, &pad);
+ osd_sec_parms_set_in_offset(osd_req_is_ver1(or), sec_parms,
+ osd_req_encode_offset(or, or->in.total_bytes, &pad));
ret = _req_append_segment(or, pad, &seg, or->in.last_seg,
&or->in);
diff --git a/drivers/scsi/osd/osd_uld.c b/drivers/scsi/osd/osd_uld.c
index f644c9571ea..22b59e13ba8 100644
--- a/drivers/scsi/osd/osd_uld.c
+++ b/drivers/scsi/osd/osd_uld.c
@@ -173,26 +173,26 @@ static const struct file_operations osd_fops = {
.unlocked_ioctl = osd_uld_ioctl,
};
-struct osd_dev *osduld_path_lookup(const char *path)
+struct osd_dev *osduld_path_lookup(const char *name)
{
- struct nameidata nd;
+ struct path path;
struct inode *inode;
struct cdev *cdev;
struct osd_uld_device *uninitialized_var(oud);
int error;
- if (!path || !*path) {
+ if (!name || !*name) {
OSD_ERR("Mount with !path || !*path\n");
return ERR_PTR(-EINVAL);
}
- error = path_lookup(path, LOOKUP_FOLLOW, &nd);
+ error = kern_path(name, LOOKUP_FOLLOW, &path);
if (error) {
- OSD_ERR("path_lookup of %s faild=>%d\n", path, error);
+ OSD_ERR("path_lookup of %s failed=>%d\n", name, error);
return ERR_PTR(error);
}
- inode = nd.path.dentry->d_inode;
+ inode = path.dentry->d_inode;
error = -EINVAL; /* Not the right device e.g osd_uld_device */
if (!S_ISCHR(inode->i_mode)) {
OSD_DEBUG("!S_ISCHR()\n");
@@ -202,15 +202,15 @@ struct osd_dev *osduld_path_lookup(const char *path)
cdev = inode->i_cdev;
if (!cdev) {
OSD_ERR("Before mounting an OSD Based filesystem\n");
- OSD_ERR(" user-mode must open+close the %s device\n", path);
- OSD_ERR(" Example: bash: echo < %s\n", path);
+ OSD_ERR(" user-mode must open+close the %s device\n", name);
+ OSD_ERR(" Example: bash: echo < %s\n", name);
goto out;
}
/* The Magic wand. Is it our char-dev */
/* TODO: Support sg devices */
if (cdev->owner != THIS_MODULE) {
- OSD_ERR("Error mounting %s - is not an OSD device\n", path);
+ OSD_ERR("Error mounting %s - is not an OSD device\n", name);
goto out;
}
@@ -220,7 +220,7 @@ struct osd_dev *osduld_path_lookup(const char *path)
error = 0;
out:
- path_put(&nd.path);
+ path_put(&path);
return error ? ERR_PTR(error) : &oud->od;
}
EXPORT_SYMBOL(osduld_path_lookup);
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index d1cb64ad1a3..bb218c8b6e9 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -1291,10 +1291,8 @@ static inline int scsi_target_queue_ready(struct Scsi_Host *shost,
if (--starget->target_blocked == 0) {
SCSI_LOG_MLQUEUE(3, starget_printk(KERN_INFO, starget,
"unblocking target at zero depth\n"));
- } else {
- blk_plug_device(sdev->request_queue);
+ } else
return 0;
- }
}
if (scsi_target_is_busy(starget)) {
diff --git a/drivers/scsi/scsi_scan.c b/drivers/scsi/scsi_scan.c
index 6f51ca485f3..e2b50d8f57a 100644
--- a/drivers/scsi/scsi_scan.c
+++ b/drivers/scsi/scsi_scan.c
@@ -425,6 +425,7 @@ static struct scsi_target *scsi_alloc_target(struct device *parent,
INIT_LIST_HEAD(&starget->devices);
starget->state = STARGET_CREATED;
starget->scsi_level = SCSI_2;
+ starget->max_target_blocked = SCSI_DEFAULT_TARGET_BLOCKED;
retry:
spin_lock_irqsave(shost->host_lock, flags);
diff --git a/drivers/scsi/scsi_transport_iscsi.c b/drivers/scsi/scsi_transport_iscsi.c
index 09479545529..0a2ce7b6325 100644
--- a/drivers/scsi/scsi_transport_iscsi.c
+++ b/drivers/scsi/scsi_transport_iscsi.c
@@ -357,7 +357,7 @@ int iscsi_session_chkready(struct iscsi_cls_session *session)
err = 0;
break;
case ISCSI_SESSION_FAILED:
- err = DID_TRANSPORT_DISRUPTED << 16;
+ err = DID_IMM_RETRY << 16;
break;
case ISCSI_SESSION_FREE:
err = DID_TRANSPORT_FAILFAST << 16;
diff --git a/drivers/scsi/sd.c b/drivers/scsi/sd.c
index 3fcb64b91c4..84044233b63 100644
--- a/drivers/scsi/sd.c
+++ b/drivers/scsi/sd.c
@@ -50,6 +50,7 @@
#include <linux/string_helpers.h>
#include <linux/async.h>
#include <asm/uaccess.h>
+#include <asm/unaligned.h>
#include <scsi/scsi.h>
#include <scsi/scsi_cmnd.h>
@@ -1344,12 +1345,8 @@ static int read_capacity_16(struct scsi_disk *sdkp, struct scsi_device *sdp,
return -EINVAL;
}
- sector_size = (buffer[8] << 24) | (buffer[9] << 16) |
- (buffer[10] << 8) | buffer[11];
- lba = (((u64)buffer[0] << 56) | ((u64)buffer[1] << 48) |
- ((u64)buffer[2] << 40) | ((u64)buffer[3] << 32) |
- ((u64)buffer[4] << 24) | ((u64)buffer[5] << 16) |
- ((u64)buffer[6] << 8) | (u64)buffer[7]);
+ sector_size = get_unaligned_be32(&buffer[8]);
+ lba = get_unaligned_be64(&buffer[0]);
sd_read_protection_type(sdkp, buffer);
@@ -1400,10 +1397,8 @@ static int read_capacity_10(struct scsi_disk *sdkp, struct scsi_device *sdp,
return -EINVAL;
}
- sector_size = (buffer[4] << 24) | (buffer[5] << 16) |
- (buffer[6] << 8) | buffer[7];
- lba = (buffer[0] << 24) | (buffer[1] << 16) |
- (buffer[2] << 8) | buffer[3];
+ sector_size = get_unaligned_be32(&buffer[4]);
+ lba = get_unaligned_be32(&buffer[0]);
if ((sizeof(sdkp->capacity) == 4) && (lba == 0xffffffff)) {
sd_printk(KERN_ERR, sdkp, "Too big for this kernel. Use a "
diff --git a/drivers/scsi/sg.c b/drivers/scsi/sg.c
index 82312df9b0b..e1716f14cd4 100644
--- a/drivers/scsi/sg.c
+++ b/drivers/scsi/sg.c
@@ -179,7 +179,7 @@ typedef struct sg_device { /* holds the state of each scsi generic device */
/* tasklet or soft irq callback */
static void sg_rq_end_io(struct request *rq, int uptodate);
static int sg_start_req(Sg_request *srp, unsigned char *cmd);
-static void sg_finish_rem_req(Sg_request * srp);
+static int sg_finish_rem_req(Sg_request * srp);
static int sg_build_indirect(Sg_scatter_hold * schp, Sg_fd * sfp, int buff_size);
static ssize_t sg_new_read(Sg_fd * sfp, char __user *buf, size_t count,
Sg_request * srp);
@@ -518,7 +518,7 @@ sg_new_read(Sg_fd * sfp, char __user *buf, size_t count, Sg_request * srp)
goto err_out;
}
err_out:
- sg_finish_rem_req(srp);
+ err = sg_finish_rem_req(srp);
return (0 == err) ? count : err;
}
@@ -1696,9 +1696,10 @@ static int sg_start_req(Sg_request *srp, unsigned char *cmd)
return res;
}
-static void
-sg_finish_rem_req(Sg_request * srp)
+static int sg_finish_rem_req(Sg_request * srp)
{
+ int ret = 0;
+
Sg_fd *sfp = srp->parentfp;
Sg_scatter_hold *req_schp = &srp->data;
@@ -1710,12 +1711,14 @@ sg_finish_rem_req(Sg_request * srp)
if (srp->rq) {
if (srp->bio)
- blk_rq_unmap_user(srp->bio);
+ ret = blk_rq_unmap_user(srp->bio);
blk_put_request(srp->rq);
}
sg_remove_request(sfp, srp);
+
+ return ret;
}
static int
diff --git a/drivers/scsi/sr_ioctl.c b/drivers/scsi/sr_ioctl.c
index d92ff512d21..291236e6e43 100644
--- a/drivers/scsi/sr_ioctl.c
+++ b/drivers/scsi/sr_ioctl.c
@@ -309,6 +309,11 @@ int sr_drive_status(struct cdrom_device_info *cdi, int slot)
if (0 == sr_test_unit_ready(cd->device, &sshdr))
return CDS_DISC_OK;
+ /* SK/ASC/ASCQ of 2/4/1 means "unit is becoming ready" */
+ if (scsi_sense_valid(&sshdr) && sshdr.sense_key == NOT_READY
+ && sshdr.asc == 0x04 && sshdr.ascq == 0x01)
+ return CDS_DRIVE_NOT_READY;
+
if (!cdrom_get_media_event(cdi, &med)) {
if (med.media_present)
return CDS_DISC_OK;
diff --git a/drivers/serial/amba-pl010.c b/drivers/serial/amba-pl010.c
index e3a5ad5ef1d..cdc049d4350 100644
--- a/drivers/serial/amba-pl010.c
+++ b/drivers/serial/amba-pl010.c
@@ -665,7 +665,7 @@ static struct uart_driver amba_reg = {
.cons = AMBA_CONSOLE,
};
-static int pl010_probe(struct amba_device *dev, void *id)
+static int pl010_probe(struct amba_device *dev, struct amba_id *id)
{
struct uart_amba_port *uap;
void __iomem *base;
diff --git a/drivers/serial/amba-pl011.c b/drivers/serial/amba-pl011.c
index 8b2b9700f3e..88fdac51b6c 100644
--- a/drivers/serial/amba-pl011.c
+++ b/drivers/serial/amba-pl011.c
@@ -729,7 +729,7 @@ static struct uart_driver amba_reg = {
.cons = AMBA_CONSOLE,
};
-static int pl011_probe(struct amba_device *dev, void *id)
+static int pl011_probe(struct amba_device *dev, struct amba_id *id)
{
struct uart_amba_port *uap;
void __iomem *base;
diff --git a/drivers/serial/crisv10.c b/drivers/serial/crisv10.c
index 7ba7d70f04d..7be52fe288e 100644
--- a/drivers/serial/crisv10.c
+++ b/drivers/serial/crisv10.c
@@ -23,16 +23,18 @@ static char *serial_version = "$Revision: 1.25 $";
#include <linux/mm.h>
#include <linux/slab.h>
#include <linux/init.h>
-#include <asm/uaccess.h>
#include <linux/kernel.h>
#include <linux/mutex.h>
#include <linux/bitops.h>
+#include <linux/seq_file.h>
+#include <linux/delay.h>
+#include <linux/module.h>
+#include <linux/uaccess.h>
+#include <linux/io.h>
-#include <asm/io.h>
#include <asm/irq.h>
#include <asm/dma.h>
#include <asm/system.h>
-#include <linux/delay.h>
#include <arch/svinto.h>
@@ -456,7 +458,6 @@ static struct e100_serial rs_table[] = {
#define NR_PORTS (sizeof(rs_table)/sizeof(struct e100_serial))
-static struct ktermios *serial_termios[NR_PORTS];
#ifdef CONFIG_ETRAX_SERIAL_FAST_TIMER
static struct fast_timer fast_timers[NR_PORTS];
#endif
@@ -4257,151 +4258,132 @@ rs_open(struct tty_struct *tty, struct file * filp)
return 0;
}
+#ifdef CONFIG_PROC_FS
/*
* /proc fs routines....
*/
-static int line_info(char *buf, struct e100_serial *info)
+static void seq_line_info(struct seq_file *m, struct e100_serial *info)
{
- char stat_buf[30];
- int ret;
unsigned long tmp;
- ret = sprintf(buf, "%d: uart:E100 port:%lX irq:%d",
- info->line, (unsigned long)info->ioport, info->irq);
+ seq_printf(m, "%d: uart:E100 port:%lX irq:%d",
+ info->line, (unsigned long)info->ioport, info->irq);
if (!info->ioport || (info->type == PORT_UNKNOWN)) {
- ret += sprintf(buf+ret, "\n");
- return ret;
+ seq_printf(m, "\n");
+ return;
}
- stat_buf[0] = 0;
- stat_buf[1] = 0;
- if (!E100_RTS_GET(info))
- strcat(stat_buf, "|RTS");
- if (!E100_CTS_GET(info))
- strcat(stat_buf, "|CTS");
- if (!E100_DTR_GET(info))
- strcat(stat_buf, "|DTR");
- if (!E100_DSR_GET(info))
- strcat(stat_buf, "|DSR");
- if (!E100_CD_GET(info))
- strcat(stat_buf, "|CD");
- if (!E100_RI_GET(info))
- strcat(stat_buf, "|RI");
-
- ret += sprintf(buf+ret, " baud:%d", info->baud);
-
- ret += sprintf(buf+ret, " tx:%lu rx:%lu",
+ seq_printf(m, " baud:%d", info->baud);
+ seq_printf(m, " tx:%lu rx:%lu",
(unsigned long)info->icount.tx,
(unsigned long)info->icount.rx);
tmp = CIRC_CNT(info->xmit.head, info->xmit.tail, SERIAL_XMIT_SIZE);
- if (tmp) {
- ret += sprintf(buf+ret, " tx_pend:%lu/%lu",
- (unsigned long)tmp,
- (unsigned long)SERIAL_XMIT_SIZE);
- }
+ if (tmp)
+ seq_printf(m, " tx_pend:%lu/%lu",
+ (unsigned long)tmp,
+ (unsigned long)SERIAL_XMIT_SIZE);
- ret += sprintf(buf+ret, " rx_pend:%lu/%lu",
- (unsigned long)info->recv_cnt,
- (unsigned long)info->max_recv_cnt);
+ seq_printf(m, " rx_pend:%lu/%lu",
+ (unsigned long)info->recv_cnt,
+ (unsigned long)info->max_recv_cnt);
#if 1
if (info->port.tty) {
-
if (info->port.tty->stopped)
- ret += sprintf(buf+ret, " stopped:%i",
- (int)info->port.tty->stopped);
+ seq_printf(m, " stopped:%i",
+ (int)info->port.tty->stopped);
if (info->port.tty->hw_stopped)
- ret += sprintf(buf+ret, " hw_stopped:%i",
- (int)info->port.tty->hw_stopped);
+ seq_printf(m, " hw_stopped:%i",
+ (int)info->port.tty->hw_stopped);
}
{
unsigned char rstat = info->ioport[REG_STATUS];
- if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect) )
- ret += sprintf(buf+ret, " xoff_detect:1");
+ if (rstat & IO_MASK(R_SERIAL0_STATUS, xoff_detect))
+ seq_printf(m, " xoff_detect:1");
}
#endif
-
-
-
if (info->icount.frame)
- ret += sprintf(buf+ret, " fe:%lu",
- (unsigned long)info->icount.frame);
+ seq_printf(m, " fe:%lu", (unsigned long)info->icount.frame);
if (info->icount.parity)
- ret += sprintf(buf+ret, " pe:%lu",
- (unsigned long)info->icount.parity);
+ seq_printf(m, " pe:%lu", (unsigned long)info->icount.parity);
if (info->icount.brk)
- ret += sprintf(buf+ret, " brk:%lu",
- (unsigned long)info->icount.brk);
+ seq_printf(m, " brk:%lu", (unsigned long)info->icount.brk);
if (info->icount.overrun)
- ret += sprintf(buf+ret, " oe:%lu",
- (unsigned long)info->icount.overrun);
+ seq_printf(m, " oe:%lu", (unsigned long)info->icount.overrun);
/*
* Last thing is the RS-232 status lines
*/
- ret += sprintf(buf+ret, " %s\n", stat_buf+1);
- return ret;
+ if (!E100_RTS_GET(info))
+ seq_puts(m, "|RTS");
+ if (!E100_CTS_GET(info))
+ seq_puts(m, "|CTS");
+ if (!E100_DTR_GET(info))
+ seq_puts(m, "|DTR");
+ if (!E100_DSR_GET(info))
+ seq_puts(m, "|DSR");
+ if (!E100_CD_GET(info))
+ seq_puts(m, "|CD");
+ if (!E100_RI_GET(info))
+ seq_puts(m, "|RI");
+ seq_puts(m, "\n");
}
-int rs_read_proc(char *page, char **start, off_t off, int count,
- int *eof, void *data)
+
+static int crisv10_proc_show(struct seq_file *m, void *v)
{
- int i, len = 0, l;
- off_t begin = 0;
+ int i;
- len += sprintf(page, "serinfo:1.0 driver:%s\n",
- serial_version);
- for (i = 0; i < NR_PORTS && len < 4000; i++) {
+ seq_printf(m, "serinfo:1.0 driver:%s\n", serial_version);
+
+ for (i = 0; i < NR_PORTS; i++) {
if (!rs_table[i].enabled)
continue;
- l = line_info(page + len, &rs_table[i]);
- len += l;
- if (len+begin > off+count)
- goto done;
- if (len+begin < off) {
- begin += len;
- len = 0;
- }
+ seq_line_info(m, &rs_table[i]);
}
#ifdef DEBUG_LOG_INCLUDED
for (i = 0; i < debug_log_pos; i++) {
- len += sprintf(page + len, "%-4i %lu.%lu ", i, debug_log[i].time, timer_data_to_ns(debug_log[i].timer_data));
- len += sprintf(page + len, debug_log[i].string, debug_log[i].value);
- if (len+begin > off+count)
- goto done;
- if (len+begin < off) {
- begin += len;
- len = 0;
- }
+ seq_printf(m, "%-4i %lu.%lu ",
+ i, debug_log[i].time,
+ timer_data_to_ns(debug_log[i].timer_data));
+ seq_printf(m, debug_log[i].string, debug_log[i].value);
}
- len += sprintf(page + len, "debug_log %i/%i %li bytes\n",
- i, DEBUG_LOG_SIZE, begin+len);
+ seq_printf(m, "debug_log %i/%i\n", i, DEBUG_LOG_SIZE);
debug_log_pos = 0;
#endif
+ return 0;
+}
- *eof = 1;
-done:
- if (off >= len+begin)
- return 0;
- *start = page + (off-begin);
- return ((count < begin+len-off) ? count : begin+len-off);
+static int crisv10_proc_open(struct inode *inode, struct file *file)
+{
+ return single_open(file, crisv10_proc_show, NULL);
}
+static const struct file_operations crisv10_proc_fops = {
+ .owner = THIS_MODULE,
+ .open = crisv10_proc_open,
+ .read = seq_read,
+ .llseek = seq_lseek,
+ .release = single_release,
+};
+#endif
+
+
/* Finally, routines used to initialize the serial driver. */
-static void
-show_serial_version(void)
+static void show_serial_version(void)
{
printk(KERN_INFO
- "ETRAX 100LX serial-driver %s, (c) 2000-2004 Axis Communications AB\r\n",
+ "ETRAX 100LX serial-driver %s, "
+ "(c) 2000-2004 Axis Communications AB\r\n",
&serial_version[11]); /* "$Revision: x.yy" */
}
@@ -4425,13 +4407,14 @@ static const struct tty_operations rs_ops = {
.break_ctl = rs_break,
.send_xchar = rs_send_xchar,
.wait_until_sent = rs_wait_until_sent,
- .read_proc = rs_read_proc,
.tiocmget = rs_tiocmget,
- .tiocmset = rs_tiocmset
+ .tiocmset = rs_tiocmset,
+#ifdef CONFIG_PROC_FS
+ .proc_fops = &crisv10_proc_fops,
+#endif
};
-static int __init
-rs_init(void)
+static int __init rs_init(void)
{
int i;
struct e100_serial *info;
diff --git a/drivers/serial/icom.c b/drivers/serial/icom.c
index 6579e2be1dd..a461b3b2c72 100644
--- a/drivers/serial/icom.c
+++ b/drivers/serial/icom.c
@@ -1472,8 +1472,8 @@ static void icom_remove_adapter(struct icom_adapter *icom_adapter)
free_irq(icom_adapter->pci_dev->irq, (void *) icom_adapter);
iounmap(icom_adapter->base_addr);
- icom_free_adapter(icom_adapter);
pci_release_regions(icom_adapter->pci_dev);
+ icom_free_adapter(icom_adapter);
}
static void icom_kref_release(struct kref *kref)
diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h
index 8871aaa3dba..c0a3e2734e2 100644
--- a/drivers/serial/jsm/jsm.h
+++ b/drivers/serial/jsm/jsm.h
@@ -130,8 +130,6 @@ struct jsm_board
struct pci_dev *pci_dev;
u32 maxports; /* MAX ports this board can handle */
- spinlock_t bd_lock; /* Used to protect board */
-
spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and
* the interrupt routine from each other.
*/
diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c
index d2d32a19862..b3604aa322a 100644
--- a/drivers/serial/jsm/jsm_driver.c
+++ b/drivers/serial/jsm/jsm_driver.c
@@ -88,7 +88,6 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device
else
brd->maxports = 2;
- spin_lock_init(&brd->bd_lock);
spin_lock_init(&brd->bd_intr_lock);
/* store which revision we have */
diff --git a/drivers/serial/nwpserial.c b/drivers/serial/nwpserial.c
index 32f3eaf0d26..9e150b19d72 100644
--- a/drivers/serial/nwpserial.c
+++ b/drivers/serial/nwpserial.c
@@ -145,11 +145,13 @@ static irqreturn_t nwpserial_interrupt(int irq, void *dev_id)
ch = dcr_read(up->dcr_host, UART_RX);
if (up->port.ignore_status_mask != NWPSERIAL_STATUS_RXVALID)
tty_insert_flip_char(tty, ch, TTY_NORMAL);
- } while (dcr_read(up->dcr_host, UART_RX) & UART_LSR_DR);
+ } while (dcr_read(up->dcr_host, UART_LSR) & UART_LSR_DR);
tty_flip_buffer_push(tty);
ret = IRQ_HANDLED;
+ /* clear interrupt */
+ dcr_write(up->dcr_host, UART_IIR, 1);
out:
spin_unlock(&up->port.lock);
return ret;
diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c
index 06936d13393..3e378523368 100644
--- a/drivers/serial/s3c6400.c
+++ b/drivers/serial/s3c6400.c
@@ -102,6 +102,7 @@ static struct s3c24xx_uart_info s3c6400_uart_inf = {
.name = "Samsung S3C6400 UART",
.type = PORT_S3C6400,
.fifosize = 64,
+ .has_divslot = 1,
.rx_fifomask = S3C2440_UFSTAT_RXMASK,
.rx_fifoshift = S3C2440_UFSTAT_RXSHIFT,
.rx_fifofull = S3C2440_UFSTAT_RXFULL,
diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c
index e06686ae858..93b5d75db12 100644
--- a/drivers/serial/samsung.c
+++ b/drivers/serial/samsung.c
@@ -508,6 +508,7 @@ s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c)
struct baud_calc {
struct s3c24xx_uart_clksrc *clksrc;
unsigned int calc;
+ unsigned int divslot;
unsigned int quot;
struct clk *src;
};
@@ -517,6 +518,7 @@ static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
struct s3c24xx_uart_clksrc *clksrc,
unsigned int baud)
{
+ struct s3c24xx_uart_port *ourport = to_ourport(port);
unsigned long rate;
calc->src = clk_get(port->dev, clksrc->name);
@@ -527,8 +529,24 @@ static int s3c24xx_serial_calcbaud(struct baud_calc *calc,
rate /= clksrc->divisor;
calc->clksrc = clksrc;
- calc->quot = (rate + (8 * baud)) / (16 * baud);
- calc->calc = (rate / (calc->quot * 16));
+
+ if (ourport->info->has_divslot) {
+ unsigned long div = rate / baud;
+
+ /* The UDIVSLOT register on the newer UARTs allows us to
+ * get a divisor adjustment of 1/16th on the baud clock.
+ *
+ * We don't keep the UDIVSLOT value (the 16ths we calculated
+ * by not multiplying the baud by 16) as it is easy enough
+ * to recalculate.
+ */
+
+ calc->quot = div / 16;
+ calc->calc = rate / div;
+ } else {
+ calc->quot = (rate + (8 * baud)) / (16 * baud);
+ calc->calc = (rate / (calc->quot * 16));
+ }
calc->quot--;
return 1;
@@ -611,6 +629,30 @@ static unsigned int s3c24xx_serial_getclk(struct uart_port *port,
return best->quot;
}
+/* udivslot_table[]
+ *
+ * This table takes the fractional value of the baud divisor and gives
+ * the recommended setting for the UDIVSLOT register.
+ */
+static u16 udivslot_table[16] = {
+ [0] = 0x0000,
+ [1] = 0x0080,
+ [2] = 0x0808,
+ [3] = 0x0888,
+ [4] = 0x2222,
+ [5] = 0x4924,
+ [6] = 0x4A52,
+ [7] = 0x54AA,
+ [8] = 0x5555,
+ [9] = 0xD555,
+ [10] = 0xD5D5,
+ [11] = 0xDDD5,
+ [12] = 0xDDDD,
+ [13] = 0xDFDD,
+ [14] = 0xDFDF,
+ [15] = 0xFFDF,
+};
+
static void s3c24xx_serial_set_termios(struct uart_port *port,
struct ktermios *termios,
struct ktermios *old)
@@ -623,6 +665,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
unsigned int baud, quot;
unsigned int ulcon;
unsigned int umcon;
+ unsigned int udivslot = 0;
/*
* We don't support modem control lines.
@@ -644,6 +687,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
/* check to see if we need to change clock source */
if (ourport->clksrc != clksrc || ourport->baudclk != clk) {
+ dbg("selecting clock %p\n", clk);
s3c24xx_serial_setsource(port, clksrc);
if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) {
@@ -658,6 +702,13 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0;
}
+ if (ourport->info->has_divslot) {
+ unsigned int div = ourport->baudclk_rate / baud;
+
+ udivslot = udivslot_table[div & 15];
+ dbg("udivslot = %04x (div %d)\n", udivslot, div & 15);
+ }
+
switch (termios->c_cflag & CSIZE) {
case CS5:
dbg("config: 5bits/char\n");
@@ -697,12 +748,16 @@ static void s3c24xx_serial_set_termios(struct uart_port *port,
spin_lock_irqsave(&port->lock, flags);
- dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot);
+ dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n",
+ ulcon, quot, udivslot);
wr_regl(port, S3C2410_ULCON, ulcon);
wr_regl(port, S3C2410_UBRDIV, quot);
wr_regl(port, S3C2410_UMCON, umcon);
+ if (ourport->info->has_divslot)
+ wr_regl(port, S3C2443_DIVSLOT, udivslot);
+
dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n",
rd_regl(port, S3C2410_ULCON),
rd_regl(port, S3C2410_UCON),
diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h
index 571d6b90d20..7afb94843a0 100644
--- a/drivers/serial/samsung.h
+++ b/drivers/serial/samsung.h
@@ -21,6 +21,10 @@ struct s3c24xx_uart_info {
unsigned long tx_fifoshift;
unsigned long tx_fifofull;
+ /* uart port features */
+
+ unsigned int has_divslot:1;
+
/* clock source control */
int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk);
diff --git a/drivers/spi/pxa2xx_spi.c b/drivers/spi/pxa2xx_spi.c
index 885194a0741..3f3c08c6ba4 100644
--- a/drivers/spi/pxa2xx_spi.c
+++ b/drivers/spi/pxa2xx_spi.c
@@ -1373,6 +1373,9 @@ static void cleanup(struct spi_device *spi)
{
struct chip_data *chip = spi_get_ctldata(spi);
+ if (!chip)
+ return;
+
if (gpio_is_valid(chip->gpio_cs))
gpio_free(chip->gpio_cs);
diff --git a/drivers/staging/comedi/TODO b/drivers/staging/comedi/TODO
index 55781295846..15c9348fb93 100644
--- a/drivers/staging/comedi/TODO
+++ b/drivers/staging/comedi/TODO
@@ -11,4 +11,3 @@ Please send patches to Greg Kroah-Hartman <greg@kroah.com> and
copy:
Ian Abbott <abbotti@mev.co.uk>
Frank Mori Hess <fmhess@users.sourceforge.net>
- David Schleef <ds@schleef.org>
diff --git a/drivers/staging/rt2870/rt2870.h b/drivers/staging/rt2870/rt2870.h
index a42caa37080..a69cf338e49 100644
--- a/drivers/staging/rt2870/rt2870.h
+++ b/drivers/staging/rt2870/rt2870.h
@@ -145,6 +145,7 @@
{USB_DEVICE(0x0789,0x0162)}, /* Logitec */ \
{USB_DEVICE(0x0789,0x0163)}, /* Logitec */ \
{USB_DEVICE(0x0789,0x0164)}, /* Logitec */ \
+ {USB_DEVICE(0x7392,0x7717)}, /* Edimax */ \
{ }/* Terminating entry */ \
}
diff --git a/drivers/staging/rtl8187se/r8180.h b/drivers/staging/rtl8187se/r8180.h
index 12215fc61dd..db446b7e2e0 100644
--- a/drivers/staging/rtl8187se/r8180.h
+++ b/drivers/staging/rtl8187se/r8180.h
@@ -19,7 +19,7 @@
#define R8180H
-#define RTL8180_MODULE_NAME "rtl8180"
+#define RTL8180_MODULE_NAME "r8180"
#define DMESG(x,a...) printk(KERN_INFO RTL8180_MODULE_NAME ": " x "\n", ## a)
#define DMESGW(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": WW:" x "\n", ## a)
#define DMESGE(x,a...) printk(KERN_WARNING RTL8180_MODULE_NAME ": EE:" x "\n", ## a)
diff --git a/drivers/staging/rtl8187se/r8180_core.c b/drivers/staging/rtl8187se/r8180_core.c
index 6ecd12de429..e10413cee0d 100644
--- a/drivers/staging/rtl8187se/r8180_core.c
+++ b/drivers/staging/rtl8187se/r8180_core.c
@@ -640,11 +640,9 @@ void rtl8180_proc_init_one(struct net_device *dev)
{
struct proc_dir_entry *e;
struct r8180_priv *priv = (struct r8180_priv *)ieee80211_priv(dev);
- priv->dir_dev = create_proc_entry(dev->name,
- S_IFDIR | S_IRUGO | S_IXUGO,
- rtl8180_proc);
+ priv->dir_dev = rtl8180_proc;
if (!priv->dir_dev) {
- DMESGE("Unable to initialize /proc/net/rtl8180/%s\n",
+ DMESGE("Unable to initialize /proc/net/r8180/%s\n",
dev->name);
return;
}
@@ -654,7 +652,7 @@ void rtl8180_proc_init_one(struct net_device *dev)
if (!e) {
DMESGE("Unable to initialize "
- "/proc/net/rtl8180/%s/stats-hw\n",
+ "/proc/net/r8180/%s/stats-hw\n",
dev->name);
}
@@ -663,7 +661,7 @@ void rtl8180_proc_init_one(struct net_device *dev)
if (!e) {
DMESGE("Unable to initialize "
- "/proc/net/rtl8180/%s/stats-rx\n",
+ "/proc/net/r8180/%s/stats-rx\n",
dev->name);
}
@@ -673,7 +671,7 @@ void rtl8180_proc_init_one(struct net_device *dev)
if (!e) {
DMESGE("Unable to initialize "
- "/proc/net/rtl8180/%s/stats-tx\n",
+ "/proc/net/r8180/%s/stats-tx\n",
dev->name);
}
#if 0
@@ -702,7 +700,7 @@ void rtl8180_proc_init_one(struct net_device *dev)
if (!e) {
DMESGE("Unable to initialize "
- "/proc/net/rtl8180/%s/registers\n",
+ "/proc/net/r8180/%s/registers\n",
dev->name);
}
}
@@ -977,13 +975,6 @@ void check_tx_ring(struct net_device *dev, int pri)
*tmp & (1<<15)? "ok": "err", *(tmp+4));
}
- DMESG("nic at %d",
- (nic-nicbegin) / 8 /4);
- DMESG("tail at %d", ((int)tail - (int)begin) /8 /4);
- DMESG("head at %d", ((int)head - (int)begin) /8 /4);
- DMESG("check free desc returns %d", check_nic_enought_desc(dev,pri));
- DMESG("free desc is %d\n", get_curr_tx_free_desc(dev,pri));
- //rtl8180_reset(dev);
return;
}
@@ -1736,17 +1727,7 @@ short alloc_tx_desc_ring(struct net_device *dev, int bufsize, int count,
* descriptor's buffer must be 256 byte aligned
* we shouldn't be here, since we set DMA mask !
*/
- DMESGW("Fixing TX alignment");
- desc = (u32*)((u8*)desc + 256);
-#if (defined(CONFIG_HIGHMEM64G) || defined(CONFIG_64BIT_PHYS_ADDR))
- desc = (u32*)((u64)desc &~ 0xff);
- dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
- dma_desc = (dma_addr_t)((u64)dma_desc &~ 0xff);
-#else
- desc = (u32*)((u32)desc &~ 0xff);
- dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
- dma_desc = (dma_addr_t)((u32)dma_desc &~ 0xff);
-#endif
+ WARN(1, "DMA buffer is not aligned\n");
}
tmp=desc;
for (i=0;i<count;i++)
@@ -1984,18 +1965,7 @@ short alloc_rx_desc_ring(struct net_device *dev, u16 bufsize, int count)
* descriptor's buffer must be 256 byte aligned
* should never happen since we specify the DMA mask
*/
-
- DMESGW("Fixing RX alignment");
- desc = (u32*)((u8*)desc + 256);
-#if (defined(CONFIG_HIGHMEM64G) || defined(CONFIG_64BIT_PHYS_ADDR))
- desc = (u32*)((u64)desc &~ 0xff);
- dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
- dma_desc = (dma_addr_t)((u64)dma_desc &~ 0xff);
-#else
- desc = (u32*)((u32)desc &~ 0xff);
- dma_desc = (dma_addr_t)((u8*)dma_desc + 256);
- dma_desc = (dma_addr_t)((u32)dma_desc &~ 0xff);
-#endif
+ WARN(1, "DMA buffer is not aligned\n");
}
priv->rxring=desc;
diff --git a/drivers/staging/winbond/wbusb.c b/drivers/staging/winbond/wbusb.c
index 9c3f9439f35..3b2d52819b4 100644
--- a/drivers/staging/winbond/wbusb.c
+++ b/drivers/staging/winbond/wbusb.c
@@ -386,7 +386,7 @@ static int wb35_probe(struct usb_interface *intf, const struct usb_device_id *id
if (err)
goto error_free_hw;
- usb_set_intfdata(intf, priv);
+ usb_set_intfdata(intf, dev);
return 0;
@@ -415,10 +415,15 @@ static void wb35_hw_halt(struct wbsoft_priv *adapter)
static void wb35_disconnect(struct usb_interface *intf)
{
- struct wbsoft_priv *priv = usb_get_intfdata(intf);
+ struct ieee80211_hw *hw = usb_get_intfdata(intf);
+ struct wbsoft_priv *priv = hw->priv;
wb35_hw_halt(priv);
+ ieee80211_stop_queues(hw);
+ ieee80211_unregister_hw(hw);
+ ieee80211_free_hw(hw);
+
usb_set_intfdata(intf, NULL);
usb_put_dev(interface_to_usbdev(intf));
}
diff --git a/drivers/thermal/thermal_sys.c b/drivers/thermal/thermal_sys.c
index d0b093b66ad..5e38ba10a3a 100644
--- a/drivers/thermal/thermal_sys.c
+++ b/drivers/thermal/thermal_sys.c
@@ -961,7 +961,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
switch (trip_type) {
case THERMAL_TRIP_CRITICAL:
- if (temp > trip_temp) {
+ if (temp >= trip_temp) {
if (tz->ops->notify)
ret = tz->ops->notify(tz, count,
trip_type);
@@ -974,7 +974,7 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
}
break;
case THERMAL_TRIP_HOT:
- if (temp > trip_temp)
+ if (temp >= trip_temp)
if (tz->ops->notify)
tz->ops->notify(tz, count, trip_type);
break;
@@ -986,14 +986,14 @@ void thermal_zone_device_update(struct thermal_zone_device *tz)
cdev = instance->cdev;
- if (temp > trip_temp)
+ if (temp >= trip_temp)
cdev->ops->set_cur_state(cdev, 1);
else
cdev->ops->set_cur_state(cdev, 0);
}
break;
case THERMAL_TRIP_PASSIVE:
- if (temp > trip_temp || tz->passive)
+ if (temp >= trip_temp || tz->passive)
thermal_zone_device_passive(tz, temp,
trip_temp, count);
break;
diff --git a/drivers/usb/Makefile b/drivers/usb/Makefile
index 89299a5ce16..0716cdb44cd 100644
--- a/drivers/usb/Makefile
+++ b/drivers/usb/Makefile
@@ -27,6 +27,8 @@ obj-$(CONFIG_USB_WUSB) += wusbcore/
obj-$(CONFIG_USB_ACM) += class/
obj-$(CONFIG_USB_PRINTER) += class/
+obj-$(CONFIG_USB_WDM) += class/
+obj-$(CONFIG_USB_TMC) += class/
obj-$(CONFIG_USB_STORAGE) += storage/
obj-$(CONFIG_USB) += storage/
diff --git a/drivers/usb/atm/cxacru.c b/drivers/usb/atm/cxacru.c
index 6789089e246..56802d2e994 100644
--- a/drivers/usb/atm/cxacru.c
+++ b/drivers/usb/atm/cxacru.c
@@ -227,8 +227,14 @@ static ssize_t cxacru_sysfs_showattr_s8(s8 value, char *buf)
static ssize_t cxacru_sysfs_showattr_dB(s16 value, char *buf)
{
- return snprintf(buf, PAGE_SIZE, "%d.%02u\n",
- value / 100, abs(value) % 100);
+ if (likely(value >= 0)) {
+ return snprintf(buf, PAGE_SIZE, "%u.%02u\n",
+ value / 100, value % 100);
+ } else {
+ value = -value;
+ return snprintf(buf, PAGE_SIZE, "-%u.%02u\n",
+ value / 100, value % 100);
+ }
}
static ssize_t cxacru_sysfs_showattr_bool(u32 value, char *buf)
diff --git a/drivers/usb/gadget/usbstring.c b/drivers/usb/gadget/usbstring.c
index 4154be375c7..58c4d37d312 100644
--- a/drivers/usb/gadget/usbstring.c
+++ b/drivers/usb/gadget/usbstring.c
@@ -38,7 +38,7 @@ static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len)
uchar = (c & 0x1f) << 6;
c = (u8) *s++;
- if ((c & 0xc0) != 0xc0)
+ if ((c & 0xc0) != 0x80)
goto fail;
c &= 0x3f;
uchar |= c;
@@ -49,13 +49,13 @@ static int utf8_to_utf16le(const char *s, __le16 *cp, unsigned len)
uchar = (c & 0x0f) << 12;
c = (u8) *s++;
- if ((c & 0xc0) != 0xc0)
+ if ((c & 0xc0) != 0x80)
goto fail;
c &= 0x3f;
uchar |= c << 6;
c = (u8) *s++;
- if ((c & 0xc0) != 0xc0)
+ if ((c & 0xc0) != 0x80)
goto fail;
c &= 0x3f;
uchar |= c;
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index 8100f1d2590..d9fcdaedf38 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -56,6 +56,7 @@ static __u16 vendor = FTDI_VID;
static __u16 product;
struct ftdi_private {
+ struct kref kref;
ftdi_chip_type_t chip_type;
/* type of device, either SIO or FT8U232AM */
int baud_base; /* baud base clock for divisor setting */
@@ -669,6 +670,8 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
+ { USB_DEVICE(MARVELL_VID, MARVELL_SHEEVAPLUG_PID),
+ .driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
@@ -1352,6 +1355,7 @@ static int ftdi_sio_port_probe(struct usb_serial_port *port)
return -ENOMEM;
}
+ kref_init(&priv->kref);
spin_lock_init(&priv->rx_lock);
spin_lock_init(&priv->tx_lock);
init_waitqueue_head(&priv->delta_msr_wait);
@@ -1468,6 +1472,13 @@ static void ftdi_shutdown(struct usb_serial *serial)
dbg("%s", __func__);
}
+static void ftdi_sio_priv_release(struct kref *k)
+{
+ struct ftdi_private *priv = container_of(k, struct ftdi_private, kref);
+
+ kfree(priv);
+}
+
static int ftdi_sio_port_remove(struct usb_serial_port *port)
{
struct ftdi_private *priv = usb_get_serial_port_data(port);
@@ -1476,14 +1487,7 @@ static int ftdi_sio_port_remove(struct usb_serial_port *port)
remove_sysfs_attrs(port);
- /* all open ports are closed at this point
- * (by usbserial.c:__serial_close, which calls ftdi_close)
- */
-
- if (priv) {
- usb_set_serial_port_data(port, NULL);
- kfree(priv);
- }
+ kref_put(&priv->kref, ftdi_sio_priv_release);
return 0;
}
@@ -1547,7 +1551,8 @@ static int ftdi_open(struct tty_struct *tty,
dev_err(&port->dev,
"%s - failed submitting read urb, error %d\n",
__func__, result);
-
+ else
+ kref_get(&priv->kref);
return result;
} /* ftdi_open */
@@ -1589,11 +1594,11 @@ static void ftdi_close(struct tty_struct *tty,
mutex_unlock(&port->serial->disc_mutex);
/* cancel any scheduled reading */
- cancel_delayed_work(&priv->rx_work);
- flush_scheduled_work();
+ cancel_delayed_work_sync(&priv->rx_work);
/* shutdown our bulk read */
usb_kill_urb(port->read_urb);
+ kref_put(&priv->kref, ftdi_sio_priv_release);
} /* ftdi_close */
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index c09f658a448..12330fa1c09 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -920,6 +920,12 @@
#define JETI_SPC1201_PID 0x04b2
/*
+ * Marvell SheevaPlug
+ */
+#define MARVELL_VID 0x9e88
+#define MARVELL_SHEEVAPLUG_PID 0x9e8f
+
+/*
* BmRequestType: 1100 0000b
* bRequest: FTDI_E2_READ
* wValue: 0
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index fa65a3b0860..4b8b69045fe 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -160,8 +160,9 @@ UNUSUAL_DEV( 0x0420, 0x0001, 0x0100, 0x0100,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_IGNORE_RESIDUE ),
-/* Reported by Andrew Nayenko <relan@bk.ru> */
-UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0592,
+/* Reported by Andrew Nayenko <relan@bk.ru>
+ * Updated for new firmware by Phillip Potter <phillipinda@hotmail.com> */
+UNUSUAL_DEV( 0x0421, 0x0019, 0x0592, 0x0610,
"Nokia",
"Nokia 6288",
US_SC_DEVICE, US_PR_DEVICE, NULL,
diff --git a/drivers/video/Kconfig b/drivers/video/Kconfig
index 7826bdce4bb..0048f1185a6 100644
--- a/drivers/video/Kconfig
+++ b/drivers/video/Kconfig
@@ -1128,13 +1128,6 @@ config FB_INTEL
830M/845G/852GM/855GM/865G/915G/915GM/945G/945GM/965G/965GM chipsets.
Say Y if you have and plan to use such a board.
- If you say Y here and want DDC/I2C support you must first say Y to
- "I2C support" and "I2C bit-banging support" in the character devices
- section.
-
- If you say M here then "I2C support" and "I2C bit-banging support"
- can be build either as modules or built-in.
-
To compile this driver as a module, choose M here: the
module will be called intelfb.
@@ -1207,11 +1200,10 @@ config FB_MATROX_G
pixel and 32 bpp packed pixel. You can also use font widths
different from 8.
- If you need support for G400 secondary head, you must first say Y to
- "I2C support" in the character devices section, and then to
- "Matrox I2C support" and "G400 second head support" here in the
- framebuffer section. G450/G550 secondary head and digital output
- are supported without additional modules.
+ If you need support for G400 secondary head, you must say Y to
+ "Matrox I2C support" and "G400 second head support" right below.
+ G450/G550 secondary head and digital output are supported without
+ additional modules.
The driver starts in monitor mode. You must use the matroxset tool
(available at <ftp://platan.vc.cvut.cz/pub/linux/matrox-latest/>) to
@@ -1310,13 +1302,6 @@ config FB_RADEON
a framebuffer device. There are both PCI and AGP versions. You
don't need to choose this to run the Radeon in plain VGA mode.
- If you say Y here and want DDC/I2C support you must first say Y to
- "I2C support" and "I2C bit-banging support" in the character devices
- section.
-
- If you say M here then "I2C support" and "I2C bit-banging support"
- can be build either as modules or built-in.
-
There is a product page at
http://apps.ati.com/ATIcompare/
diff --git a/drivers/video/Makefile b/drivers/video/Makefile
index 0dbd6c68d76..d8d0be5151e 100644
--- a/drivers/video/Makefile
+++ b/drivers/video/Makefile
@@ -56,7 +56,6 @@ obj-$(CONFIG_FB_CT65550) += chipsfb.o
obj-$(CONFIG_FB_IMSTT) += imsttfb.o
obj-$(CONFIG_FB_FM2) += fm2fb.o
obj-$(CONFIG_FB_VT8623) += vt8623fb.o
-obj-$(CONFIG_FB_CYBLA) += cyblafb.o
obj-$(CONFIG_FB_TRIDENT) += tridentfb.o
obj-$(CONFIG_FB_LE80578) += vermilion/
obj-$(CONFIG_FB_S3) += s3fb.o
diff --git a/drivers/video/amba-clcd.c b/drivers/video/amba-clcd.c
index 61050ab1412..d1f80bac54f 100644
--- a/drivers/video/amba-clcd.c
+++ b/drivers/video/amba-clcd.c
@@ -437,7 +437,7 @@ static int clcdfb_register(struct clcd_fb *fb)
return ret;
}
-static int clcdfb_probe(struct amba_device *dev, void *id)
+static int clcdfb_probe(struct amba_device *dev, struct amba_id *id)
{
struct clcd_board *board = dev->dev.platform_data;
struct clcd_fb *fb;
diff --git a/drivers/video/cfbfillrect.c b/drivers/video/cfbfillrect.c
index 64b35766b2a..ba9f58b2a5e 100644
--- a/drivers/video/cfbfillrect.c
+++ b/drivers/video/cfbfillrect.c
@@ -9,10 +9,6 @@
*
* NOTES:
*
- * The code for depths like 24 that don't have integer number of pixels per
- * long is broken and needs to be fixed. For now I turned these types of
- * mode off.
- *
* Also need to add code to deal with cards endians that are different than
* the native cpu endians. I also need to deal with MSB position in the word.
*
@@ -139,7 +135,7 @@ bitfill_unaligned(struct fb_info *p, unsigned long __iomem *dst, int dst_idx,
// Trailing bits
if (last)
- FB_WRITEL(comp(pat, FB_READL(dst), first), dst);
+ FB_WRITEL(comp(pat, FB_READL(dst), last), dst);
}
}
@@ -281,7 +277,7 @@ bitfill_unaligned_rev(struct fb_info *p, unsigned long __iomem *dst,
void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
{
- unsigned long pat, fg;
+ unsigned long pat, pat2, fg;
unsigned long width = rect->width, height = rect->height;
int bits = BITS_PER_LONG, bytes = bits >> 3;
u32 bpp = p->var.bits_per_pixel;
@@ -297,7 +293,7 @@ void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
else
fg = rect->color;
- pat = pixel_to_pat( bpp, fg);
+ pat = pixel_to_pat(bpp, fg);
dst = (unsigned long __iomem *)((unsigned long)p->screen_base & ~(bytes-1));
dst_idx = ((unsigned long)p->screen_base & (bytes - 1))*8;
@@ -333,17 +329,16 @@ void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
dst_idx += p->fix.line_length*8;
}
} else {
- int right;
- int r;
- int rot = (left-dst_idx) % bpp;
+ int right, r;
void (*fill_op)(struct fb_info *p, unsigned long __iomem *dst,
int dst_idx, unsigned long pat, int left,
int right, unsigned n, int bits) = NULL;
-
- /* rotate pattern to correct start position */
- pat = pat << rot | pat >> (bpp-rot);
-
- right = bpp-left;
+#ifdef __LITTLE_ENDIAN
+ right = left;
+ left = bpp - right;
+#else
+ right = bpp - left;
+#endif
switch (rect->rop) {
case ROP_XOR:
fill_op = bitfill_unaligned_rev;
@@ -352,17 +347,18 @@ void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
fill_op = bitfill_unaligned;
break;
default:
- printk( KERN_ERR "cfb_fillrect(): unknown rop, defaulting to ROP_COPY\n");
+ printk(KERN_ERR "cfb_fillrect(): unknown rop, defaulting to ROP_COPY\n");
fill_op = bitfill_unaligned;
break;
}
while (height--) {
- dst += dst_idx >> (ffs(bits) - 1);
+ dst += dst_idx / bits;
dst_idx &= (bits - 1);
- fill_op(p, dst, dst_idx, pat, left, right,
+ r = dst_idx % bpp;
+ /* rotate pattern to the correct start position */
+ pat2 = le_long_to_cpu(rolx(cpu_to_le_long(pat), r, bpp));
+ fill_op(p, dst, dst_idx, pat2, left, right,
width*bpp, bits);
- r = (p->fix.line_length*8) % bpp;
- pat = pat << (bpp-r) | pat >> r;
dst_idx += p->fix.line_length*8;
}
}
diff --git a/drivers/video/console/vgacon.c b/drivers/video/console/vgacon.c
index d012edda6d1..38e86b84dce 100644
--- a/drivers/video/console/vgacon.c
+++ b/drivers/video/console/vgacon.c
@@ -1282,7 +1282,7 @@ static int vgacon_font_get(struct vc_data *c, struct console_font *font)
font->charcount = vga_512_chars ? 512 : 256;
if (!font->data)
return 0;
- return vgacon_do_font_op(&state, font->data, 0, 0);
+ return vgacon_do_font_op(&state, font->data, 0, vga_512_chars);
}
#else
diff --git a/drivers/video/fb_draw.h b/drivers/video/fb_draw.h
index 1db622192bd..04c01faaf77 100644
--- a/drivers/video/fb_draw.h
+++ b/drivers/video/fb_draw.h
@@ -33,11 +33,11 @@ pixel_to_pat( u32 bpp, u32 pixel)
case 8:
return 0x0101010101010101ul*pixel;
case 12:
- return 0x0001001001001001ul*pixel;
+ return 0x1001001001001001ul*pixel;
case 16:
return 0x0001000100010001ul*pixel;
case 24:
- return 0x0000000001000001ul*pixel;
+ return 0x0001000001000001ul*pixel;
case 32:
return 0x0000000100000001ul*pixel;
default:
@@ -58,11 +58,11 @@ pixel_to_pat( u32 bpp, u32 pixel)
case 8:
return 0x01010101ul*pixel;
case 12:
- return 0x00001001ul*pixel;
+ return 0x01001001ul*pixel;
case 16:
return 0x00010001ul*pixel;
case 24:
- return 0x00000001ul*pixel;
+ return 0x01000001ul*pixel;
case 32:
return 0x00000001ul*pixel;
default:
@@ -167,4 +167,17 @@ static inline unsigned long fb_rev_pixels_in_long(unsigned long val,
#endif /* CONFIG_FB_CFB_REV_PIXELS_IN_BYTE */
+#define cpu_to_le_long _cpu_to_le_long(BITS_PER_LONG)
+#define _cpu_to_le_long(x) __cpu_to_le_long(x)
+#define __cpu_to_le_long(x) cpu_to_le##x
+
+#define le_long_to_cpu _le_long_to_cpu(BITS_PER_LONG)
+#define _le_long_to_cpu(x) __le_long_to_cpu(x)
+#define __le_long_to_cpu(x) le##x##_to_cpu
+
+static inline unsigned long rolx(unsigned long word, unsigned int shift, unsigned int x)
+{
+ return (word << shift) | (word >> (x - shift));
+}
+
#endif /* FB_DRAW_H */
diff --git a/drivers/video/gbefb.c b/drivers/video/gbefb.c
index fe5b519860b..1a83709f961 100644
--- a/drivers/video/gbefb.c
+++ b/drivers/video/gbefb.c
@@ -75,7 +75,7 @@ struct gbefb_par {
static unsigned int gbe_mem_size = CONFIG_FB_GBE_MEM * 1024*1024;
static void *gbe_mem;
static dma_addr_t gbe_dma_addr;
-unsigned long gbe_mem_phys;
+static unsigned long gbe_mem_phys;
static struct {
uint16_t *cpu;
@@ -185,8 +185,8 @@ static struct fb_videomode default_mode_LCD __initdata = {
.vmode = FB_VMODE_NONINTERLACED,
};
-struct fb_videomode *default_mode __initdata = &default_mode_CRT;
-struct fb_var_screeninfo *default_var __initdata = &default_var_CRT;
+static struct fb_videomode *default_mode __initdata = &default_mode_CRT;
+static struct fb_var_screeninfo *default_var __initdata = &default_var_CRT;
static int flat_panel_enabled = 0;
@@ -205,7 +205,7 @@ static void gbe_reset(void)
* console.
*/
-void gbe_turn_off(void)
+static void gbe_turn_off(void)
{
int i;
unsigned int val, x, y, vpixen_off;
@@ -1097,7 +1097,7 @@ static void gbefb_create_sysfs(struct device *dev)
* Initialization
*/
-int __init gbefb_setup(char *options)
+static int __init gbefb_setup(char *options)
{
char *this_opt;
@@ -1283,7 +1283,7 @@ static struct platform_driver gbefb_driver = {
static struct platform_device *gbefb_device;
-int __init gbefb_init(void)
+static int __init gbefb_init(void)
{
int ret = platform_driver_register(&gbefb_driver);
if (!ret) {
@@ -1301,7 +1301,7 @@ int __init gbefb_init(void)
return ret;
}
-void __exit gbefb_exit(void)
+static void __exit gbefb_exit(void)
{
platform_device_unregister(gbefb_device);
platform_driver_unregister(&gbefb_driver);
diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c
index 21b3692092f..9894de1c9b9 100644
--- a/drivers/video/mx3fb.c
+++ b/drivers/video/mx3fb.c
@@ -1152,11 +1152,11 @@ static struct fb_ops mx3fb_ops = {
*/
static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
{
- struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
- struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+ struct mx3fb_data *mx3fb = platform_get_drvdata(pdev);
+ struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
acquire_console_sem();
- fb_set_suspend(drv_data->fbi, 1);
+ fb_set_suspend(mx3fb->fbi, 1);
release_console_sem();
if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
@@ -1172,16 +1172,16 @@ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state)
*/
static int mx3fb_resume(struct platform_device *pdev)
{
- struct mx3fb_data *drv_data = platform_get_drvdata(pdev);
- struct mx3fb_info *mx3_fbi = drv_data->fbi->par;
+ struct mx3fb_data *mx3fb = platform_get_drvdata(pdev);
+ struct mx3fb_info *mx3_fbi = mx3fb->fbi->par;
if (mx3_fbi->blank == FB_BLANK_UNBLANK) {
sdc_enable_channel(mx3_fbi);
- sdc_set_brightness(mx3fb, drv_data->backlight_level);
+ sdc_set_brightness(mx3fb, mx3fb->backlight_level);
}
acquire_console_sem();
- fb_set_suspend(drv_data->fbi, 0);
+ fb_set_suspend(mx3fb->fbi, 0);
release_console_sem();
return 0;
diff --git a/drivers/video/omap/dispc.c b/drivers/video/omap/dispc.c
index dfb72f5e4c9..148cbcc3960 100644
--- a/drivers/video/omap/dispc.c
+++ b/drivers/video/omap/dispc.c
@@ -880,20 +880,22 @@ static irqreturn_t omap_dispc_irq_handler(int irq, void *dev)
static int get_dss_clocks(void)
{
- if (IS_ERR((dispc.dss_ick = clk_get(dispc.fbdev->dev, "dss_ick")))) {
- dev_err(dispc.fbdev->dev, "can't get dss_ick\n");
+ dispc.dss_ick = clk_get(dispc.fbdev->dev, "ick");
+ if (IS_ERR(dispc.dss_ick)) {
+ dev_err(dispc.fbdev->dev, "can't get ick\n");
return PTR_ERR(dispc.dss_ick);
}
- if (IS_ERR((dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck")))) {
+ dispc.dss1_fck = clk_get(dispc.fbdev->dev, "dss1_fck");
+ if (IS_ERR(dispc.dss1_fck)) {
dev_err(dispc.fbdev->dev, "can't get dss1_fck\n");
clk_put(dispc.dss_ick);
return PTR_ERR(dispc.dss1_fck);
}
- if (IS_ERR((dispc.dss_54m_fck =
- clk_get(dispc.fbdev->dev, "dss_54m_fck")))) {
- dev_err(dispc.fbdev->dev, "can't get dss_54m_fck\n");
+ dispc.dss_54m_fck = clk_get(dispc.fbdev->dev, "tv_fck");
+ if (IS_ERR(dispc.dss_54m_fck)) {
+ dev_err(dispc.fbdev->dev, "can't get tv_fck\n");
clk_put(dispc.dss_ick);
clk_put(dispc.dss1_fck);
return PTR_ERR(dispc.dss_54m_fck);
diff --git a/drivers/video/omap/rfbi.c b/drivers/video/omap/rfbi.c
index a13c8dcad2a..9332d6ca645 100644
--- a/drivers/video/omap/rfbi.c
+++ b/drivers/video/omap/rfbi.c
@@ -83,12 +83,14 @@ static inline u32 rfbi_read_reg(int idx)
static int rfbi_get_clocks(void)
{
- if (IS_ERR((rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "dss_ick")))) {
- dev_err(rfbi.fbdev->dev, "can't get dss_ick\n");
+ rfbi.dss_ick = clk_get(rfbi.fbdev->dev, "ick");
+ if (IS_ERR(rfbi.dss_ick)) {
+ dev_err(rfbi.fbdev->dev, "can't get ick\n");
return PTR_ERR(rfbi.dss_ick);
}
- if (IS_ERR((rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck")))) {
+ rfbi.dss1_fck = clk_get(rfbi.fbdev->dev, "dss1_fck");
+ if (IS_ERR(rfbi.dss1_fck)) {
dev_err(rfbi.fbdev->dev, "can't get dss1_fck\n");
clk_put(rfbi.dss_ick);
return PTR_ERR(rfbi.dss1_fck);
diff --git a/drivers/video/sh_mobile_lcdcfb.c b/drivers/video/sh_mobile_lcdcfb.c
index 92ea0ab44ce..f10d2fbeda0 100644
--- a/drivers/video/sh_mobile_lcdcfb.c
+++ b/drivers/video/sh_mobile_lcdcfb.c
@@ -47,6 +47,7 @@ struct sh_mobile_lcdc_priv {
#endif
unsigned long lddckr;
struct sh_mobile_lcdc_chan ch[2];
+ int started;
};
/* shared registers */
@@ -451,6 +452,7 @@ static int sh_mobile_lcdc_start(struct sh_mobile_lcdc_priv *priv)
/* start the lcdc */
sh_mobile_lcdc_start_stop(priv, 1);
+ priv->started = 1;
/* tell the board code to enable the panel */
for (k = 0; k < ARRAY_SIZE(priv->ch); k++) {
@@ -493,7 +495,10 @@ static void sh_mobile_lcdc_stop(struct sh_mobile_lcdc_priv *priv)
}
/* stop the lcdc */
- sh_mobile_lcdc_start_stop(priv, 0);
+ if (priv->started) {
+ sh_mobile_lcdc_start_stop(priv, 0);
+ priv->started = 0;
+ }
/* stop clocks */
for (k = 0; k < ARRAY_SIZE(priv->ch); k++)
diff --git a/drivers/video/sysfillrect.c b/drivers/video/sysfillrect.c
index f94d6b6e29e..33ee3d34f9d 100644
--- a/drivers/video/sysfillrect.c
+++ b/drivers/video/sysfillrect.c
@@ -124,7 +124,7 @@ bitfill_unaligned(struct fb_info *p, unsigned long *dst, int dst_idx,
/* Trailing bits */
if (last)
- *dst = comp(pat, *dst, first);
+ *dst = comp(pat, *dst, last);
}
}
@@ -242,7 +242,7 @@ bitfill_unaligned_rev(struct fb_info *p, unsigned long *dst, int dst_idx,
void sys_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
{
- unsigned long pat, fg;
+ unsigned long pat, pat2, fg;
unsigned long width = rect->width, height = rect->height;
int bits = BITS_PER_LONG, bytes = bits >> 3;
u32 bpp = p->var.bits_per_pixel;
@@ -292,17 +292,16 @@ void sys_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
dst_idx += p->fix.line_length*8;
}
} else {
- int right;
- int r;
- int rot = (left-dst_idx) % bpp;
+ int right, r;
void (*fill_op)(struct fb_info *p, unsigned long *dst,
int dst_idx, unsigned long pat, int left,
int right, unsigned n, int bits) = NULL;
-
- /* rotate pattern to correct start position */
- pat = pat << rot | pat >> (bpp-rot);
-
- right = bpp-left;
+#ifdef __LITTLE_ENDIAN
+ right = left;
+ left = bpp - right;
+#else
+ right = bpp - left;
+#endif
switch (rect->rop) {
case ROP_XOR:
fill_op = bitfill_unaligned_rev;
@@ -311,18 +310,19 @@ void sys_fillrect(struct fb_info *p, const struct fb_fillrect *rect)
fill_op = bitfill_unaligned;
break;
default:
- printk(KERN_ERR "cfb_fillrect(): unknown rop, "
+ printk(KERN_ERR "sys_fillrect(): unknown rop, "
"defaulting to ROP_COPY\n");
fill_op = bitfill_unaligned;
break;
}
while (height--) {
- dst += dst_idx >> (ffs(bits) - 1);
+ dst += dst_idx / bits;
dst_idx &= (bits - 1);
- fill_op(p, dst, dst_idx, pat, left, right,
+ r = dst_idx % bpp;
+ /* rotate pattern to the correct start position */
+ pat2 = le_long_to_cpu(rolx(cpu_to_le_long(pat), r, bpp));
+ fill_op(p, dst, dst_idx, pat2, left, right,
width*bpp, bits);
- r = (p->fix.line_length*8) % bpp;
- pat = pat << (bpp-r) | pat >> r;
dst_idx += p->fix.line_length*8;
}
}
diff --git a/drivers/video/via/viafbdev.c b/drivers/video/via/viafbdev.c
index e327b84820d..a0fec298216 100644
--- a/drivers/video/via/viafbdev.c
+++ b/drivers/video/via/viafbdev.c
@@ -2103,7 +2103,7 @@ static void viafb_remove_proc(struct proc_dir_entry *viafb_entry)
static int __devinit via_pci_probe(void)
{
- unsigned int default_xres, default_yres;
+ unsigned long default_xres, default_yres;
char *tmpc, *tmpm;
char *tmpc_sec, *tmpm_sec;
int vmode_index;
@@ -2196,8 +2196,8 @@ static int __devinit via_pci_probe(void)
viafb_FB_MM = viaparinfo->fbmem_virt;
tmpm = viafb_mode;
tmpc = strsep(&tmpm, "x");
- strict_strtoul(tmpc, 0, (unsigned long *)&default_xres);
- strict_strtoul(tmpm, 0, (unsigned long *)&default_yres);
+ strict_strtoul(tmpc, 0, &default_xres);
+ strict_strtoul(tmpm, 0, &default_yres);
vmode_index = viafb_get_mode_index(default_xres, default_yres, 0);
DEBUG_MSG(KERN_INFO "0->index=%d\n", vmode_index);
diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c
index efa4b363ce7..f5bbd9e8341 100644
--- a/drivers/xen/balloon.c
+++ b/drivers/xen/balloon.c
@@ -513,7 +513,8 @@ static ssize_t show_target(struct sys_device *dev, struct sysdev_attribute *attr
char *buf)
{
return sprintf(buf, "%llu\n",
- (u64)balloon_stats.target_pages << PAGE_SHIFT);
+ (unsigned long long)balloon_stats.target_pages
+ << PAGE_SHIFT);
}
static ssize_t store_target(struct sys_device *dev,
diff --git a/fs/9p/vfs_super.c b/fs/9p/vfs_super.c
index 5f8ab8adb5f..ab5547ff29a 100644
--- a/fs/9p/vfs_super.c
+++ b/fs/9p/vfs_super.c
@@ -37,6 +37,7 @@
#include <linux/mount.h>
#include <linux/idr.h>
#include <linux/sched.h>
+#include <linux/smp_lock.h>
#include <net/9p/9p.h>
#include <net/9p/client.h>
@@ -155,6 +156,7 @@ static int v9fs_get_sb(struct file_system_type *fs_type, int flags,
root = d_alloc_root(inode);
if (!root) {
+ iput(inode);
retval = -ENOMEM;
goto release_sb;
}
@@ -173,10 +175,7 @@ P9_DPRINTK(P9_DEBUG_VFS, " simple set mount, return 0\n");
return 0;
release_sb:
- if (sb) {
- up_write(&sb->s_umount);
- deactivate_super(sb);
- }
+ deactivate_locked_super(sb);
free_stat:
kfree(st);
@@ -230,9 +229,12 @@ static int v9fs_show_options(struct seq_file *m, struct vfsmount *mnt)
static void
v9fs_umount_begin(struct super_block *sb)
{
- struct v9fs_session_info *v9ses = sb->s_fs_info;
+ struct v9fs_session_info *v9ses;
+ lock_kernel();
+ v9ses = sb->s_fs_info;
v9fs_session_cancel(v9ses);
+ unlock_kernel();
}
static const struct super_operations v9fs_super_ops = {
diff --git a/fs/affs/super.c b/fs/affs/super.c
index 5ce695e707f..63f5183f263 100644
--- a/fs/affs/super.c
+++ b/fs/affs/super.c
@@ -507,8 +507,7 @@ affs_remount(struct super_block *sb, int *flags, char *data)
kfree(new_opts);
return -EINVAL;
}
- kfree(sb->s_options);
- sb->s_options = new_opts;
+ replace_mount_options(sb, new_opts);
sbi->s_flags = mount_flags;
sbi->s_mode = mode;
diff --git a/fs/afs/super.c b/fs/afs/super.c
index aee239a048c..76828e5f8a3 100644
--- a/fs/afs/super.c
+++ b/fs/afs/super.c
@@ -405,21 +405,20 @@ static int afs_get_sb(struct file_system_type *fs_type,
sb->s_flags = flags;
ret = afs_fill_super(sb, &params);
if (ret < 0) {
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
goto error;
}
- sb->s_options = new_opts;
+ save_mount_options(sb, new_opts);
sb->s_flags |= MS_ACTIVE;
} else {
_debug("reuse");
- kfree(new_opts);
ASSERTCMP(sb->s_flags, &, MS_ACTIVE);
}
simple_set_mnt(mnt, sb);
afs_put_volume(params.volume);
afs_put_cell(params.cell);
+ kfree(new_opts);
_leave(" = 0 [%p]", sb);
return 0;
diff --git a/fs/autofs4/expire.c b/fs/autofs4/expire.c
index 75f7ddacf7d..3077d8f1652 100644
--- a/fs/autofs4/expire.c
+++ b/fs/autofs4/expire.c
@@ -70,8 +70,10 @@ static int autofs4_mount_busy(struct vfsmount *mnt, struct dentry *dentry)
* Otherwise it's an offset mount and we need to check
* if we can umount its mount, if there is one.
*/
- if (!d_mountpoint(dentry))
+ if (!d_mountpoint(dentry)) {
+ status = 0;
goto done;
+ }
}
/* Update the expiry counter if fs is busy */
diff --git a/fs/binfmt_elf_fdpic.c b/fs/binfmt_elf_fdpic.c
index 70cfc4b84ae..fdb66faa24f 100644
--- a/fs/binfmt_elf_fdpic.c
+++ b/fs/binfmt_elf_fdpic.c
@@ -1388,7 +1388,7 @@ static void fill_prstatus(struct elf_prstatus *prstatus,
prstatus->pr_sigpend = p->pending.signal.sig[0];
prstatus->pr_sighold = p->blocked.sig[0];
prstatus->pr_pid = task_pid_vnr(p);
- prstatus->pr_ppid = task_pid_vnr(p->parent);
+ prstatus->pr_ppid = task_pid_vnr(p->real_parent);
prstatus->pr_pgrp = task_pgrp_vnr(p);
prstatus->pr_sid = task_session_vnr(p);
if (thread_group_leader(p)) {
@@ -1433,7 +1433,7 @@ static int fill_psinfo(struct elf_prpsinfo *psinfo, struct task_struct *p,
psinfo->pr_psargs[len] = 0;
psinfo->pr_pid = task_pid_vnr(p);
- psinfo->pr_ppid = task_pid_vnr(p->parent);
+ psinfo->pr_ppid = task_pid_vnr(p->real_parent);
psinfo->pr_pgrp = task_pgrp_vnr(p);
psinfo->pr_sid = task_session_vnr(p);
diff --git a/fs/btrfs/ctree.c b/fs/btrfs/ctree.c
index a99f1c2a710..fedf8b9f03a 100644
--- a/fs/btrfs/ctree.c
+++ b/fs/btrfs/ctree.c
@@ -1469,6 +1469,7 @@ read_block_for_search(struct btrfs_trans_handle *trans,
u32 blocksize;
struct extent_buffer *b = *eb_ret;
struct extent_buffer *tmp;
+ int ret;
blocknr = btrfs_node_blockptr(b, slot);
gen = btrfs_node_ptr_generation(b, slot);
@@ -1476,6 +1477,10 @@ read_block_for_search(struct btrfs_trans_handle *trans,
tmp = btrfs_find_tree_block(root, blocknr, blocksize);
if (tmp && btrfs_buffer_uptodate(tmp, gen)) {
+ /*
+ * we found an up to date block without sleeping, return
+ * right away
+ */
*eb_ret = tmp;
return 0;
}
@@ -1483,7 +1488,9 @@ read_block_for_search(struct btrfs_trans_handle *trans,
/*
* reduce lock contention at high levels
* of the btree by dropping locks before
- * we read.
+ * we read. Don't release the lock on the current
+ * level because we need to walk this node to figure
+ * out which blocks to read.
*/
btrfs_unlock_up_safe(p, level + 1);
btrfs_set_path_blocking(p);
@@ -1494,10 +1501,21 @@ read_block_for_search(struct btrfs_trans_handle *trans,
reada_for_search(root, p, level, slot, key->objectid);
btrfs_release_path(NULL, p);
+
+ ret = -EAGAIN;
tmp = read_tree_block(root, blocknr, blocksize, gen);
- if (tmp)
+ if (tmp) {
+ /*
+ * If the read above didn't mark this buffer up to date,
+ * it will never end up being up to date. Set ret to EIO now
+ * and give up so that our caller doesn't loop forever
+ * on our EAGAINs.
+ */
+ if (!btrfs_buffer_uptodate(tmp, 0))
+ ret = -EIO;
free_extent_buffer(tmp);
- return -EAGAIN;
+ }
+ return ret;
}
/*
@@ -1696,6 +1714,9 @@ cow_done:
if (ret == -EAGAIN)
goto again;
+ if (ret == -EIO)
+ goto done;
+
if (!p->skip_locking) {
int lret;
@@ -1738,6 +1759,8 @@ done:
*/
if (!p->leave_spinning)
btrfs_set_path_blocking(p);
+ if (ret < 0)
+ btrfs_release_path(root, p);
return ret;
}
@@ -4212,6 +4235,11 @@ again:
if (ret == -EAGAIN)
goto again;
+ if (ret < 0) {
+ btrfs_release_path(root, path);
+ goto done;
+ }
+
if (!path->skip_locking) {
ret = btrfs_try_spin_lock(next);
if (!ret) {
@@ -4246,6 +4274,11 @@ again:
if (ret == -EAGAIN)
goto again;
+ if (ret < 0) {
+ btrfs_release_path(root, path);
+ goto done;
+ }
+
if (!path->skip_locking) {
btrfs_assert_tree_locked(path->nodes[level]);
ret = btrfs_try_spin_lock(next);
diff --git a/fs/btrfs/disk-io.c b/fs/btrfs/disk-io.c
index 0ff16d3331d..4b0ea0b80c2 100644
--- a/fs/btrfs/disk-io.c
+++ b/fs/btrfs/disk-io.c
@@ -848,8 +848,6 @@ struct extent_buffer *read_tree_block(struct btrfs_root *root, u64 bytenr,
if (ret == 0)
set_bit(EXTENT_BUFFER_UPTODATE, &buf->bflags);
- else
- WARN_ON(1);
return buf;
}
diff --git a/fs/btrfs/extent-tree.c b/fs/btrfs/extent-tree.c
index e4966444811..3e2c7c738f2 100644
--- a/fs/btrfs/extent-tree.c
+++ b/fs/btrfs/extent-tree.c
@@ -312,7 +312,7 @@ btrfs_lookup_first_block_group(struct btrfs_fs_info *info, u64 bytenr)
}
/*
- * return the block group that contains teh given bytenr
+ * return the block group that contains the given bytenr
*/
struct btrfs_block_group_cache *btrfs_lookup_block_group(
struct btrfs_fs_info *info,
diff --git a/fs/btrfs/inode.c b/fs/btrfs/inode.c
index 90c23eb2882..1c8b0190d03 100644
--- a/fs/btrfs/inode.c
+++ b/fs/btrfs/inode.c
@@ -3122,6 +3122,7 @@ static noinline void init_btrfs_i(struct inode *inode)
bi->flags = 0;
bi->index_cnt = (u64)-1;
bi->last_unlink_trans = 0;
+ bi->ordered_data_close = 0;
extent_map_tree_init(&BTRFS_I(inode)->extent_tree, GFP_NOFS);
extent_io_tree_init(&BTRFS_I(inode)->io_tree,
inode->i_mapping, GFP_NOFS);
@@ -4295,7 +4296,6 @@ out:
}
if (err) {
free_extent_map(em);
- WARN_ON(1);
return ERR_PTR(err);
}
return em;
diff --git a/fs/btrfs/ioctl.c b/fs/btrfs/ioctl.c
index 5e94ea6e1cb..2624b53ea78 100644
--- a/fs/btrfs/ioctl.c
+++ b/fs/btrfs/ioctl.c
@@ -437,10 +437,6 @@ out_unlock:
return 0;
}
-/*
- * Called inside transaction, so use GFP_NOFS
- */
-
static int btrfs_ioctl_resize(struct btrfs_root *root, void __user *arg)
{
u64 new_size;
diff --git a/fs/btrfs/super.c b/fs/btrfs/super.c
index 3536bdb2d7c..2ff7cd2db25 100644
--- a/fs/btrfs/super.c
+++ b/fs/btrfs/super.c
@@ -436,9 +436,9 @@ static int btrfs_show_options(struct seq_file *seq, struct vfsmount *vfs)
if (btrfs_test_opt(root, SSD))
seq_puts(seq, ",ssd");
if (btrfs_test_opt(root, NOTREELOG))
- seq_puts(seq, ",no-treelog");
+ seq_puts(seq, ",notreelog");
if (btrfs_test_opt(root, FLUSHONCOMMIT))
- seq_puts(seq, ",flush-on-commit");
+ seq_puts(seq, ",flushoncommit");
if (!(root->fs_info->sb->s_flags & MS_POSIXACL))
seq_puts(seq, ",noacl");
return 0;
@@ -502,8 +502,7 @@ static int btrfs_get_sb(struct file_system_type *fs_type, int flags,
if (s->s_root) {
if ((flags ^ s->s_flags) & MS_RDONLY) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
error = -EBUSY;
goto error_close_devices;
}
@@ -517,8 +516,7 @@ static int btrfs_get_sb(struct file_system_type *fs_type, int flags,
error = btrfs_fill_super(s, fs_devices, data,
flags & MS_SILENT ? 1 : 0);
if (error) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
goto error_free_subvol_name;
}
@@ -535,15 +533,13 @@ static int btrfs_get_sb(struct file_system_type *fs_type, int flags,
mutex_unlock(&s->s_root->d_inode->i_mutex);
if (IS_ERR(root)) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
error = PTR_ERR(root);
goto error_free_subvol_name;
}
if (!root->d_inode) {
dput(root);
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
error = -ENXIO;
goto error_free_subvol_name;
}
diff --git a/fs/buffer.c b/fs/buffer.c
index b3e5be7514f..aed297739eb 100644
--- a/fs/buffer.c
+++ b/fs/buffer.c
@@ -2397,7 +2397,8 @@ block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf,
if ((page->mapping != inode->i_mapping) ||
(page_offset(page) > size)) {
/* page got truncated out from underneath us */
- goto out_unlock;
+ unlock_page(page);
+ goto out;
}
/* page is wholly or partially inside EOF */
@@ -2411,14 +2412,15 @@ block_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf,
ret = block_commit_write(page, 0, end);
if (unlikely(ret)) {
+ unlock_page(page);
if (ret == -ENOMEM)
ret = VM_FAULT_OOM;
else /* -ENOSPC, -EIO, etc */
ret = VM_FAULT_SIGBUS;
- }
+ } else
+ ret = VM_FAULT_LOCKED;
-out_unlock:
- unlock_page(page);
+out:
return ret;
}
diff --git a/fs/cifs/CHANGES b/fs/cifs/CHANGES
index 9d1fb6ec8a5..f20c4069c22 100644
--- a/fs/cifs/CHANGES
+++ b/fs/cifs/CHANGES
@@ -1,3 +1,16 @@
+Version 1.58
+------------
+Guard against buffer overruns in various UCS-2 to UTF-8 string conversions
+when the UTF-8 string is composed of unusually long (more than 4 byte) converted
+characters. Add support for mounting root of a share which redirects immediately
+to DFS target. Convert string conversion functions from Unicode to more
+accurately mark string length before allocating memory (which may help the
+rare cases where a UTF-8 string is much larger than the UCS2 string that
+we converted from). Fix endianness of the vcnum field used during
+session setup to distinguish multiple mounts to same server from different
+userids. Raw NTLMSSP fixed (it requires /proc/fs/cifs/experimental
+flag to be set to 2, and mount must enable krb5 to turn on extended security).
+
Version 1.57
------------
Improve support for multiple security contexts to the same server. We
diff --git a/fs/cifs/README b/fs/cifs/README
index 07434181623..db208ddb989 100644
--- a/fs/cifs/README
+++ b/fs/cifs/README
@@ -651,7 +651,15 @@ Experimental When set to 1 used to enable certain experimental
signing turned on in case buffer was modified
just before it was sent, also this flag will
be used to use the new experimental directory change
- notification code).
+ notification code). When set to 2 enables
+ an additional experimental feature, "raw ntlmssp"
+ session establishment support (which allows
+ specifying "sec=ntlmssp" on mount). The Linux cifs
+ module will use ntlmv2 authentication encapsulated
+ in "raw ntlmssp" (not using SPNEGO) when
+ "sec=ntlmssp" is specified on mount.
+ This support also requires building cifs with
+ the CONFIG_CIFS_EXPERIMENTAL configuration flag.
These experimental features and tracing can be enabled by changing flags in
/proc/fs/cifs (after the cifs module has been installed or built into the
diff --git a/fs/cifs/cifs_dfs_ref.c b/fs/cifs/cifs_dfs_ref.c
index 5fdbf8a1447..83d62759c7c 100644
--- a/fs/cifs/cifs_dfs_ref.c
+++ b/fs/cifs/cifs_dfs_ref.c
@@ -340,28 +340,24 @@ cifs_dfs_follow_mountpoint(struct dentry *dentry, struct nameidata *nd)
cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
for (i = 0; i < num_referrals; i++) {
+ int len;
dump_referral(referrals+i);
- /* connect to a storage node */
- if (referrals[i].flags & DFSREF_STORAGE_SERVER) {
- int len;
- len = strlen(referrals[i].node_name);
- if (len < 2) {
- cERROR(1, ("%s: Net Address path too short: %s",
+ /* connect to a node */
+ len = strlen(referrals[i].node_name);
+ if (len < 2) {
+ cERROR(1, ("%s: Net Address path too short: %s",
__func__, referrals[i].node_name));
- rc = -EINVAL;
- goto out_err;
- }
- mnt = cifs_dfs_do_refmount(nd->path.mnt,
- nd->path.dentry,
- referrals + i);
- cFYI(1, ("%s: cifs_dfs_do_refmount:%s , mnt:%p",
- __func__,
+ rc = -EINVAL;
+ goto out_err;
+ }
+ mnt = cifs_dfs_do_refmount(nd->path.mnt,
+ nd->path.dentry, referrals + i);
+ cFYI(1, ("%s: cifs_dfs_do_refmount:%s , mnt:%p", __func__,
referrals[i].node_name, mnt));
- /* complete mount procedure if we accured submount */
- if (!IS_ERR(mnt))
- break;
- }
+ /* complete mount procedure if we accured submount */
+ if (!IS_ERR(mnt))
+ break;
}
/* we need it cause for() above could exit without valid submount */
diff --git a/fs/cifs/cifs_unicode.c b/fs/cifs/cifs_unicode.c
index 7d75272a6b3..60e3c4253de 100644
--- a/fs/cifs/cifs_unicode.c
+++ b/fs/cifs/cifs_unicode.c
@@ -1,7 +1,7 @@
/*
* fs/cifs/cifs_unicode.c
*
- * Copyright (c) International Business Machines Corp., 2000,2005
+ * Copyright (c) International Business Machines Corp., 2000,2009
* Modified by Steve French (sfrench@us.ibm.com)
*
* This program is free software; you can redistribute it and/or modify
@@ -26,31 +26,157 @@
#include "cifs_debug.h"
/*
- * NAME: cifs_strfromUCS()
- *
- * FUNCTION: Convert little-endian unicode string to character string
+ * cifs_ucs2_bytes - how long will a string be after conversion?
+ * @ucs - pointer to input string
+ * @maxbytes - don't go past this many bytes of input string
+ * @codepage - destination codepage
*
+ * Walk a ucs2le string and return the number of bytes that the string will
+ * be after being converted to the given charset, not including any null
+ * termination required. Don't walk past maxbytes in the source buffer.
*/
int
-cifs_strfromUCS_le(char *to, const __le16 *from,
- int len, const struct nls_table *codepage)
+cifs_ucs2_bytes(const __le16 *from, int maxbytes,
+ const struct nls_table *codepage)
{
int i;
- int outlen = 0;
+ int charlen, outlen = 0;
+ int maxwords = maxbytes / 2;
+ char tmp[NLS_MAX_CHARSET_SIZE];
- for (i = 0; (i < len) && from[i]; i++) {
- int charlen;
- /* 2.4.0 kernel or greater */
- charlen =
- codepage->uni2char(le16_to_cpu(from[i]), &to[outlen],
- NLS_MAX_CHARSET_SIZE);
- if (charlen > 0) {
+ for (i = 0; from[i] && i < maxwords; i++) {
+ charlen = codepage->uni2char(le16_to_cpu(from[i]), tmp,
+ NLS_MAX_CHARSET_SIZE);
+ if (charlen > 0)
outlen += charlen;
- } else {
- to[outlen++] = '?';
+ else
+ outlen++;
+ }
+
+ return outlen;
+}
+
+/*
+ * cifs_mapchar - convert a little-endian char to proper char in codepage
+ * @target - where converted character should be copied
+ * @src_char - 2 byte little-endian source character
+ * @cp - codepage to which character should be converted
+ * @mapchar - should character be mapped according to mapchars mount option?
+ *
+ * This function handles the conversion of a single character. It is the
+ * responsibility of the caller to ensure that the target buffer is large
+ * enough to hold the result of the conversion (at least NLS_MAX_CHARSET_SIZE).
+ */
+static int
+cifs_mapchar(char *target, const __le16 src_char, const struct nls_table *cp,
+ bool mapchar)
+{
+ int len = 1;
+
+ if (!mapchar)
+ goto cp_convert;
+
+ /*
+ * BB: Cannot handle remapping UNI_SLASH until all the calls to
+ * build_path_from_dentry are modified, as they use slash as
+ * separator.
+ */
+ switch (le16_to_cpu(src_char)) {
+ case UNI_COLON:
+ *target = ':';
+ break;
+ case UNI_ASTERIK:
+ *target = '*';
+ break;
+ case UNI_QUESTION:
+ *target = '?';
+ break;
+ case UNI_PIPE:
+ *target = '|';
+ break;
+ case UNI_GRTRTHAN:
+ *target = '>';
+ break;
+ case UNI_LESSTHAN:
+ *target = '<';
+ break;
+ default:
+ goto cp_convert;
+ }
+
+out:
+ return len;
+
+cp_convert:
+ len = cp->uni2char(le16_to_cpu(src_char), target,
+ NLS_MAX_CHARSET_SIZE);
+ if (len <= 0) {
+ *target = '?';
+ len = 1;
+ }
+ goto out;
+}
+
+/*
+ * cifs_from_ucs2 - convert utf16le string to local charset
+ * @to - destination buffer
+ * @from - source buffer
+ * @tolen - destination buffer size (in bytes)
+ * @fromlen - source buffer size (in bytes)
+ * @codepage - codepage to which characters should be converted
+ * @mapchar - should characters be remapped according to the mapchars option?
+ *
+ * Convert a little-endian ucs2le string (as sent by the server) to a string
+ * in the provided codepage. The tolen and fromlen parameters are to ensure
+ * that the code doesn't walk off of the end of the buffer (which is always
+ * a danger if the alignment of the source buffer is off). The destination
+ * string is always properly null terminated and fits in the destination
+ * buffer. Returns the length of the destination string in bytes (including
+ * null terminator).
+ *
+ * Note that some windows versions actually send multiword UTF-16 characters
+ * instead of straight UCS-2. The linux nls routines however aren't able to
+ * deal with those characters properly. In the event that we get some of
+ * those characters, they won't be translated properly.
+ */
+int
+cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
+ const struct nls_table *codepage, bool mapchar)
+{
+ int i, charlen, safelen;
+ int outlen = 0;
+ int nullsize = nls_nullsize(codepage);
+ int fromwords = fromlen / 2;
+ char tmp[NLS_MAX_CHARSET_SIZE];
+
+ /*
+ * because the chars can be of varying widths, we need to take care
+ * not to overflow the destination buffer when we get close to the
+ * end of it. Until we get to this offset, we don't need to check
+ * for overflow however.
+ */
+ safelen = tolen - (NLS_MAX_CHARSET_SIZE + nullsize);
+
+ for (i = 0; i < fromwords && from[i]; i++) {
+ /*
+ * check to see if converting this character might make the
+ * conversion bleed into the null terminator
+ */
+ if (outlen >= safelen) {
+ charlen = cifs_mapchar(tmp, from[i], codepage, mapchar);
+ if ((outlen + charlen) > (tolen - nullsize))
+ break;
}
+
+ /* put converted char into 'to' buffer */
+ charlen = cifs_mapchar(&to[outlen], from[i], codepage, mapchar);
+ outlen += charlen;
}
- to[outlen] = 0;
+
+ /* properly null-terminate string */
+ for (i = 0; i < nullsize; i++)
+ to[outlen++] = 0;
+
return outlen;
}
@@ -88,3 +214,41 @@ cifs_strtoUCS(__le16 *to, const char *from, int len,
return i;
}
+/*
+ * cifs_strndup_from_ucs - copy a string from wire format to the local codepage
+ * @src - source string
+ * @maxlen - don't walk past this many bytes in the source string
+ * @is_unicode - is this a unicode string?
+ * @codepage - destination codepage
+ *
+ * Take a string given by the server, convert it to the local codepage and
+ * put it in a new buffer. Returns a pointer to the new string or NULL on
+ * error.
+ */
+char *
+cifs_strndup_from_ucs(const char *src, const int maxlen, const bool is_unicode,
+ const struct nls_table *codepage)
+{
+ int len;
+ char *dst;
+
+ if (is_unicode) {
+ len = cifs_ucs2_bytes((__le16 *) src, maxlen, codepage);
+ len += nls_nullsize(codepage);
+ dst = kmalloc(len, GFP_KERNEL);
+ if (!dst)
+ return NULL;
+ cifs_from_ucs2(dst, (__le16 *) src, len, maxlen, codepage,
+ false);
+ } else {
+ len = strnlen(src, maxlen);
+ len++;
+ dst = kmalloc(len, GFP_KERNEL);
+ if (!dst)
+ return NULL;
+ strlcpy(dst, src, len);
+ }
+
+ return dst;
+}
+
diff --git a/fs/cifs/cifs_unicode.h b/fs/cifs/cifs_unicode.h
index 14eb9a2395d..650638275a6 100644
--- a/fs/cifs/cifs_unicode.h
+++ b/fs/cifs/cifs_unicode.h
@@ -5,7 +5,7 @@
* Convert a unicode character to upper or lower case using
* compressed tables.
*
- * Copyright (c) International Business Machines Corp., 2000,2007
+ * Copyright (c) International Business Machines Corp., 2000,2009
*
* This program is free software; you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
@@ -37,6 +37,19 @@
#define UNIUPR_NOLOWER /* Example to not expand lower case tables */
+/*
+ * Windows maps these to the user defined 16 bit Unicode range since they are
+ * reserved symbols (along with \ and /), otherwise illegal to store
+ * in filenames in NTFS
+ */
+#define UNI_ASTERIK (__u16) ('*' + 0xF000)
+#define UNI_QUESTION (__u16) ('?' + 0xF000)
+#define UNI_COLON (__u16) (':' + 0xF000)
+#define UNI_GRTRTHAN (__u16) ('>' + 0xF000)
+#define UNI_LESSTHAN (__u16) ('<' + 0xF000)
+#define UNI_PIPE (__u16) ('|' + 0xF000)
+#define UNI_SLASH (__u16) ('\\' + 0xF000)
+
/* Just define what we want from uniupr.h. We don't want to define the tables
* in each source file.
*/
@@ -59,8 +72,14 @@ extern struct UniCaseRange UniLowerRange[];
#endif /* UNIUPR_NOLOWER */
#ifdef __KERNEL__
-int cifs_strfromUCS_le(char *, const __le16 *, int, const struct nls_table *);
+int cifs_from_ucs2(char *to, const __le16 *from, int tolen, int fromlen,
+ const struct nls_table *codepage, bool mapchar);
+int cifs_ucs2_bytes(const __le16 *from, int maxbytes,
+ const struct nls_table *codepage);
int cifs_strtoUCS(__le16 *, const char *, int, const struct nls_table *);
+char *cifs_strndup_from_ucs(const char *src, const int maxlen,
+ const bool is_unicode,
+ const struct nls_table *codepage);
#endif
/*
diff --git a/fs/cifs/cifsfs.c b/fs/cifs/cifsfs.c
index 0d6d8b57365..5e6d35804d7 100644
--- a/fs/cifs/cifsfs.c
+++ b/fs/cifs/cifsfs.c
@@ -35,6 +35,7 @@
#include <linux/delay.h>
#include <linux/kthread.h>
#include <linux/freezer.h>
+#include <linux/smp_lock.h>
#include "cifsfs.h"
#include "cifspdu.h"
#define DECLARE_GLOBALS_HERE
@@ -530,6 +531,7 @@ static void cifs_umount_begin(struct super_block *sb)
if (tcon == NULL)
return;
+ lock_kernel();
read_lock(&cifs_tcp_ses_lock);
if (tcon->tc_count == 1)
tcon->tidStatus = CifsExiting;
@@ -548,6 +550,7 @@ static void cifs_umount_begin(struct super_block *sb)
}
/* BB FIXME - finish add checks for tidStatus BB */
+ unlock_kernel();
return;
}
@@ -599,8 +602,7 @@ cifs_get_sb(struct file_system_type *fs_type,
rc = cifs_read_super(sb, data, dev_name, flags & MS_SILENT ? 1 : 0);
if (rc) {
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
return rc;
}
sb->s_flags |= MS_ACTIVE;
diff --git a/fs/cifs/cifsfs.h b/fs/cifs/cifsfs.h
index 77e190dc288..051b71cfdea 100644
--- a/fs/cifs/cifsfs.h
+++ b/fs/cifs/cifsfs.h
@@ -100,5 +100,5 @@ extern long cifs_ioctl(struct file *filep, unsigned int cmd, unsigned long arg);
extern const struct export_operations cifs_export_ops;
#endif /* EXPERIMENTAL */
-#define CIFS_VERSION "1.57"
+#define CIFS_VERSION "1.58"
#endif /* _CIFSFS_H */
diff --git a/fs/cifs/cifsglob.h b/fs/cifs/cifsglob.h
index df40ab64cd9..a61ab772c6f 100644
--- a/fs/cifs/cifsglob.h
+++ b/fs/cifs/cifsglob.h
@@ -82,8 +82,8 @@ enum securityEnum {
LANMAN, /* Legacy LANMAN auth */
NTLM, /* Legacy NTLM012 auth with NTLM hash */
NTLMv2, /* Legacy NTLM auth with NTLMv2 hash */
- RawNTLMSSP, /* NTLMSSP without SPNEGO */
- NTLMSSP, /* NTLMSSP via SPNEGO */
+ RawNTLMSSP, /* NTLMSSP without SPNEGO, NTLMv2 hash */
+ NTLMSSP, /* NTLMSSP via SPNEGO, NTLMv2 hash */
Kerberos, /* Kerberos via SPNEGO */
MSKerberos, /* MS Kerberos via SPNEGO */
};
@@ -531,6 +531,7 @@ static inline void free_dfs_info_array(struct dfs_info3_param *param,
#define CIFSSEC_MAY_PLNTXT 0
#endif /* weak passwords */
#define CIFSSEC_MAY_SEAL 0x00040 /* not supported yet */
+#define CIFSSEC_MAY_NTLMSSP 0x00080 /* raw ntlmssp with ntlmv2 */
#define CIFSSEC_MUST_SIGN 0x01001
/* note that only one of the following can be set so the
@@ -543,22 +544,23 @@ require use of the stronger protocol */
#define CIFSSEC_MUST_LANMAN 0x10010
#define CIFSSEC_MUST_PLNTXT 0x20020
#ifdef CONFIG_CIFS_UPCALL
-#define CIFSSEC_MASK 0x3F03F /* allows weak security but also krb5 */
+#define CIFSSEC_MASK 0xAF0AF /* allows weak security but also krb5 */
#else
-#define CIFSSEC_MASK 0x37037 /* current flags supported if weak */
+#define CIFSSEC_MASK 0xA70A7 /* current flags supported if weak */
#endif /* UPCALL */
#else /* do not allow weak pw hash */
#ifdef CONFIG_CIFS_UPCALL
-#define CIFSSEC_MASK 0x0F00F /* flags supported if no weak allowed */
+#define CIFSSEC_MASK 0x8F08F /* flags supported if no weak allowed */
#else
-#define CIFSSEC_MASK 0x07007 /* flags supported if no weak allowed */
+#define CIFSSEC_MASK 0x87087 /* flags supported if no weak allowed */
#endif /* UPCALL */
#endif /* WEAK_PW_HASH */
#define CIFSSEC_MUST_SEAL 0x40040 /* not supported yet */
+#define CIFSSEC_MUST_NTLMSSP 0x80080 /* raw ntlmssp with ntlmv2 */
#define CIFSSEC_DEF (CIFSSEC_MAY_SIGN | CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2)
#define CIFSSEC_MAX (CIFSSEC_MUST_SIGN | CIFSSEC_MUST_NTLMV2)
-#define CIFSSEC_AUTH_MASK (CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2 | CIFSSEC_MAY_LANMAN | CIFSSEC_MAY_PLNTXT | CIFSSEC_MAY_KRB5)
+#define CIFSSEC_AUTH_MASK (CIFSSEC_MAY_NTLM | CIFSSEC_MAY_NTLMV2 | CIFSSEC_MAY_LANMAN | CIFSSEC_MAY_PLNTXT | CIFSSEC_MAY_KRB5 | CIFSSEC_MAY_NTLMSSP)
/*
*****************************************************************
* All constants go here
diff --git a/fs/cifs/cifsproto.h b/fs/cifs/cifsproto.h
index 4167716d32f..fae083930ee 100644
--- a/fs/cifs/cifsproto.h
+++ b/fs/cifs/cifsproto.h
@@ -260,8 +260,7 @@ extern int CIFSUnixCreateSymLink(const int xid,
const struct nls_table *nls_codepage);
extern int CIFSSMBUnixQuerySymLink(const int xid,
struct cifsTconInfo *tcon,
- const unsigned char *searchName,
- char *syminfo, const int buflen,
+ const unsigned char *searchName, char **syminfo,
const struct nls_table *nls_codepage);
extern int CIFSSMBQueryReparseLinkInfo(const int xid,
struct cifsTconInfo *tcon,
@@ -307,8 +306,6 @@ extern int CIFSGetSrvInodeNumber(const int xid, struct cifsTconInfo *tcon,
const unsigned char *searchName, __u64 *inode_number,
const struct nls_table *nls_codepage,
int remap_special_chars);
-extern int cifs_convertUCSpath(char *target, const __le16 *source, int maxlen,
- const struct nls_table *codepage);
extern int cifsConvertToUCS(__le16 *target, const char *source, int maxlen,
const struct nls_table *cp, int mapChars);
diff --git a/fs/cifs/cifssmb.c b/fs/cifs/cifssmb.c
index a0845dc7b8a..d06260251c3 100644
--- a/fs/cifs/cifssmb.c
+++ b/fs/cifs/cifssmb.c
@@ -1,7 +1,7 @@
/*
* fs/cifs/cifssmb.c
*
- * Copyright (C) International Business Machines Corp., 2002,2008
+ * Copyright (C) International Business Machines Corp., 2002,2009
* Author(s): Steve French (sfrench@us.ibm.com)
*
* Contains the routines for constructing the SMB PDUs themselves
@@ -81,41 +81,6 @@ static struct {
#endif /* CONFIG_CIFS_WEAK_PW_HASH */
#endif /* CIFS_POSIX */
-/* Allocates buffer into dst and copies smb string from src to it.
- * caller is responsible for freeing dst if function returned 0.
- * returns:
- * on success - 0
- * on failure - errno
- */
-static int
-cifs_strncpy_to_host(char **dst, const char *src, const int maxlen,
- const bool is_unicode, const struct nls_table *nls_codepage)
-{
- int plen;
-
- if (is_unicode) {
- plen = UniStrnlen((wchar_t *)src, maxlen);
- *dst = kmalloc(plen + 2, GFP_KERNEL);
- if (!*dst)
- goto cifs_strncpy_to_host_ErrExit;
- cifs_strfromUCS_le(*dst, (__le16 *)src, plen, nls_codepage);
- } else {
- plen = strnlen(src, maxlen);
- *dst = kmalloc(plen + 2, GFP_KERNEL);
- if (!*dst)
- goto cifs_strncpy_to_host_ErrExit;
- strncpy(*dst, src, plen);
- }
- (*dst)[plen] = 0;
- (*dst)[plen+1] = 0; /* harmless for ASCII case, needed for Unicode */
- return 0;
-
-cifs_strncpy_to_host_ErrExit:
- cERROR(1, ("Failed to allocate buffer for string\n"));
- return -ENOMEM;
-}
-
-
/* Mark as invalid, all open files on tree connections since they
were closed when session to server was lost */
static void mark_open_files_invalid(struct cifsTconInfo *pTcon)
@@ -484,6 +449,14 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses)
cFYI(1, ("Kerberos only mechanism, enable extended security"));
pSMB->hdr.Flags2 |= SMBFLG2_EXT_SEC;
}
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+ else if ((secFlags & CIFSSEC_MUST_NTLMSSP) == CIFSSEC_MUST_NTLMSSP)
+ pSMB->hdr.Flags2 |= SMBFLG2_EXT_SEC;
+ else if ((secFlags & CIFSSEC_AUTH_MASK) == CIFSSEC_MAY_NTLMSSP) {
+ cFYI(1, ("NTLMSSP only mechanism, enable extended security"));
+ pSMB->hdr.Flags2 |= SMBFLG2_EXT_SEC;
+ }
+#endif
count = 0;
for (i = 0; i < CIFS_NUM_PROT; i++) {
@@ -620,6 +593,8 @@ CIFSSMBNegotiate(unsigned int xid, struct cifsSesInfo *ses)
server->secType = NTLMv2;
else if (secFlags & CIFSSEC_MAY_KRB5)
server->secType = Kerberos;
+ else if (secFlags & CIFSSEC_MAY_NTLMSSP)
+ server->secType = NTLMSSP;
else if (secFlags & CIFSSEC_MAY_LANMAN)
server->secType = LANMAN;
/* #ifdef CONFIG_CIFS_EXPERIMENTAL
@@ -2417,8 +2392,7 @@ winCreateHardLinkRetry:
int
CIFSSMBUnixQuerySymLink(const int xid, struct cifsTconInfo *tcon,
- const unsigned char *searchName,
- char *symlinkinfo, const int buflen,
+ const unsigned char *searchName, char **symlinkinfo,
const struct nls_table *nls_codepage)
{
/* SMB_QUERY_FILE_UNIX_LINK */
@@ -2428,6 +2402,7 @@ CIFSSMBUnixQuerySymLink(const int xid, struct cifsTconInfo *tcon,
int bytes_returned;
int name_len;
__u16 params, byte_count;
+ char *data_start;
cFYI(1, ("In QPathSymLinkInfo (Unix) for path %s", searchName));
@@ -2482,30 +2457,26 @@ querySymLinkRetry:
/* decode response */
rc = validate_t2((struct smb_t2_rsp *)pSMBr);
- if (rc || (pSMBr->ByteCount < 2))
/* BB also check enough total bytes returned */
- rc = -EIO; /* bad smb */
+ if (rc || (pSMBr->ByteCount < 2))
+ rc = -EIO;
else {
- __u16 data_offset = le16_to_cpu(pSMBr->t2.DataOffset);
- __u16 count = le16_to_cpu(pSMBr->t2.DataCount);
+ bool is_unicode;
+ u16 count = le16_to_cpu(pSMBr->t2.DataCount);
+
+ data_start = ((char *) &pSMBr->hdr.Protocol) +
+ le16_to_cpu(pSMBr->t2.DataOffset);
+
+ if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE)
+ is_unicode = true;
+ else
+ is_unicode = false;
- if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len = UniStrnlen((wchar_t *) ((char *)
- &pSMBr->hdr.Protocol + data_offset),
- min_t(const int, buflen, count) / 2);
/* BB FIXME investigate remapping reserved chars here */
- cifs_strfromUCS_le(symlinkinfo,
- (__le16 *) ((char *)&pSMBr->hdr.Protocol
- + data_offset),
- name_len, nls_codepage);
- } else {
- strncpy(symlinkinfo,
- (char *) &pSMBr->hdr.Protocol +
- data_offset,
- min_t(const int, buflen, count));
- }
- symlinkinfo[buflen] = 0;
- /* just in case so calling code does not go off the end of buffer */
+ *symlinkinfo = cifs_strndup_from_ucs(data_start, count,
+ is_unicode, nls_codepage);
+ if (!*symlinkinfo)
+ rc = -ENOMEM;
}
}
cifs_buf_release(pSMB);
@@ -2603,7 +2574,6 @@ validate_ntransact(char *buf, char **ppparm, char **ppdata,
*pparmlen = parm_count;
return 0;
}
-#endif /* CIFS_EXPERIMENTAL */
int
CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
@@ -2613,7 +2583,6 @@ CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
{
int rc = 0;
int bytes_returned;
- int name_len;
struct smb_com_transaction_ioctl_req *pSMB;
struct smb_com_transaction_ioctl_rsp *pSMBr;
@@ -2650,59 +2619,55 @@ CIFSSMBQueryReparseLinkInfo(const int xid, struct cifsTconInfo *tcon,
} else { /* decode response */
__u32 data_offset = le32_to_cpu(pSMBr->DataOffset);
__u32 data_count = le32_to_cpu(pSMBr->DataCount);
- if ((pSMBr->ByteCount < 2) || (data_offset > 512))
+ if ((pSMBr->ByteCount < 2) || (data_offset > 512)) {
/* BB also check enough total bytes returned */
rc = -EIO; /* bad smb */
- else {
- if (data_count && (data_count < 2048)) {
- char *end_of_smb = 2 /* sizeof byte count */ +
- pSMBr->ByteCount +
- (char *)&pSMBr->ByteCount;
+ goto qreparse_out;
+ }
+ if (data_count && (data_count < 2048)) {
+ char *end_of_smb = 2 /* sizeof byte count */ +
+ pSMBr->ByteCount + (char *)&pSMBr->ByteCount;
- struct reparse_data *reparse_buf =
+ struct reparse_data *reparse_buf =
(struct reparse_data *)
((char *)&pSMBr->hdr.Protocol
+ data_offset);
- if ((char *)reparse_buf >= end_of_smb) {
- rc = -EIO;
- goto qreparse_out;
- }
- if ((reparse_buf->LinkNamesBuf +
- reparse_buf->TargetNameOffset +
- reparse_buf->TargetNameLen) >
- end_of_smb) {
- cFYI(1, ("reparse buf beyond SMB"));
- rc = -EIO;
- goto qreparse_out;
- }
+ if ((char *)reparse_buf >= end_of_smb) {
+ rc = -EIO;
+ goto qreparse_out;
+ }
+ if ((reparse_buf->LinkNamesBuf +
+ reparse_buf->TargetNameOffset +
+ reparse_buf->TargetNameLen) > end_of_smb) {
+ cFYI(1, ("reparse buf beyond SMB"));
+ rc = -EIO;
+ goto qreparse_out;
+ }
- if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
- name_len = UniStrnlen((wchar_t *)
+ if (pSMBr->hdr.Flags2 & SMBFLG2_UNICODE) {
+ cifs_from_ucs2(symlinkinfo, (__le16 *)
(reparse_buf->LinkNamesBuf +
reparse_buf->TargetNameOffset),
- min(buflen/2,
- reparse_buf->TargetNameLen / 2));
- cifs_strfromUCS_le(symlinkinfo,
- (__le16 *) (reparse_buf->LinkNamesBuf +
- reparse_buf->TargetNameOffset),
- name_len, nls_codepage);
- } else { /* ASCII names */
- strncpy(symlinkinfo,
- reparse_buf->LinkNamesBuf +
- reparse_buf->TargetNameOffset,
- min_t(const int, buflen,
- reparse_buf->TargetNameLen));
- }
- } else {
- rc = -EIO;
- cFYI(1, ("Invalid return data count on "
- "get reparse info ioctl"));
+ buflen,
+ reparse_buf->TargetNameLen,
+ nls_codepage, 0);
+ } else { /* ASCII names */
+ strncpy(symlinkinfo,
+ reparse_buf->LinkNamesBuf +
+ reparse_buf->TargetNameOffset,
+ min_t(const int, buflen,
+ reparse_buf->TargetNameLen));
}
- symlinkinfo[buflen] = 0; /* just in case so the caller
- does not go off the end of the buffer */
- cFYI(1, ("readlink result - %s", symlinkinfo));
+ } else {
+ rc = -EIO;
+ cFYI(1, ("Invalid return data count on "
+ "get reparse info ioctl"));
}
+ symlinkinfo[buflen] = 0; /* just in case so the caller
+ does not go off the end of the buffer */
+ cFYI(1, ("readlink result - %s", symlinkinfo));
}
+
qreparse_out:
cifs_buf_release(pSMB);
@@ -2711,6 +2676,7 @@ qreparse_out:
return rc;
}
+#endif /* CIFS_EXPERIMENTAL */
#ifdef CONFIG_CIFS_POSIX
@@ -3928,27 +3894,6 @@ GetInodeNumOut:
return rc;
}
-/* computes length of UCS string converted to host codepage
- * @src: UCS string
- * @maxlen: length of the input string in UCS characters
- * (not in bytes)
- *
- * return: size of input string in host codepage
- */
-static int hostlen_fromUCS(const __le16 *src, const int maxlen,
- const struct nls_table *nls_codepage) {
- int i;
- int hostlen = 0;
- char to[4];
- int charlen;
- for (i = 0; (i < maxlen) && src[i]; ++i) {
- charlen = nls_codepage->uni2char(le16_to_cpu(src[i]),
- to, NLS_MAX_CHARSET_SIZE);
- hostlen += charlen > 0 ? charlen : 1;
- }
- return hostlen;
-}
-
/* parses DFS refferal V3 structure
* caller is responsible for freeing target_nodes
* returns:
@@ -3994,7 +3939,7 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
cFYI(1, ("num_referrals: %d dfs flags: 0x%x ... \n",
*num_of_nodes,
- le16_to_cpu(pSMBr->DFSFlags)));
+ le32_to_cpu(pSMBr->DFSFlags)));
*target_nodes = kzalloc(sizeof(struct dfs_info3_param) *
*num_of_nodes, GFP_KERNEL);
@@ -4010,14 +3955,14 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
int max_len;
struct dfs_info3_param *node = (*target_nodes)+i;
- node->flags = le16_to_cpu(pSMBr->DFSFlags);
+ node->flags = le32_to_cpu(pSMBr->DFSFlags);
if (is_unicode) {
__le16 *tmp = kmalloc(strlen(searchName)*2 + 2,
GFP_KERNEL);
cifsConvertToUCS((__le16 *) tmp, searchName,
PATH_MAX, nls_codepage, remap);
- node->path_consumed = hostlen_fromUCS(tmp,
- le16_to_cpu(pSMBr->PathConsumed)/2,
+ node->path_consumed = cifs_ucs2_bytes(tmp,
+ le16_to_cpu(pSMBr->PathConsumed),
nls_codepage);
kfree(tmp);
} else
@@ -4029,20 +3974,20 @@ parse_DFS_referrals(TRANSACTION2_GET_DFS_REFER_RSP *pSMBr,
/* copy DfsPath */
temp = (char *)ref + le16_to_cpu(ref->DfsPathOffset);
max_len = data_end - temp;
- rc = cifs_strncpy_to_host(&(node->path_name), temp,
- max_len, is_unicode, nls_codepage);
- if (rc)
+ node->path_name = cifs_strndup_from_ucs(temp, max_len,
+ is_unicode, nls_codepage);
+ if (!node->path_name) {
+ rc = -ENOMEM;
goto parse_DFS_referrals_exit;
+ }
/* copy link target UNC */
temp = (char *)ref + le16_to_cpu(ref->NetworkAddressOffset);
max_len = data_end - temp;
- rc = cifs_strncpy_to_host(&(node->node_name), temp,
- max_len, is_unicode, nls_codepage);
- if (rc)
- goto parse_DFS_referrals_exit;
-
- ref += le16_to_cpu(ref->Size);
+ node->node_name = cifs_strndup_from_ucs(temp, max_len,
+ is_unicode, nls_codepage);
+ if (!node->node_name)
+ rc = -ENOMEM;
}
parse_DFS_referrals_exit:
diff --git a/fs/cifs/connect.c b/fs/cifs/connect.c
index bacdef1546b..4aa81a507b7 100644
--- a/fs/cifs/connect.c
+++ b/fs/cifs/connect.c
@@ -1,7 +1,7 @@
/*
* fs/cifs/connect.c
*
- * Copyright (C) International Business Machines Corp., 2002,2008
+ * Copyright (C) International Business Machines Corp., 2002,2009
* Author(s): Steve French (sfrench@us.ibm.com)
*
* This library is free software; you can redistribute it and/or modify
@@ -32,6 +32,7 @@
#include <linux/kthread.h>
#include <linux/pagevec.h>
#include <linux/freezer.h>
+#include <linux/namei.h>
#include <asm/uaccess.h>
#include <asm/processor.h>
#include <net/ipv6.h>
@@ -978,6 +979,13 @@ cifs_parse_mount_options(char *options, const char *devname,
return 1;
} else if (strnicmp(value, "krb5", 4) == 0) {
vol->secFlg |= CIFSSEC_MAY_KRB5;
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+ } else if (strnicmp(value, "ntlmsspi", 8) == 0) {
+ vol->secFlg |= CIFSSEC_MAY_NTLMSSP |
+ CIFSSEC_MUST_SIGN;
+ } else if (strnicmp(value, "ntlmssp", 7) == 0) {
+ vol->secFlg |= CIFSSEC_MAY_NTLMSSP;
+#endif
} else if (strnicmp(value, "ntlmv2i", 7) == 0) {
vol->secFlg |= CIFSSEC_MAY_NTLMV2 |
CIFSSEC_MUST_SIGN;
@@ -2278,6 +2286,7 @@ cifs_mount(struct super_block *sb, struct cifs_sb_info *cifs_sb,
#ifdef CONFIG_CIFS_DFS_UPCALL
struct dfs_info3_param *referrals = NULL;
unsigned int num_referrals = 0;
+ int referral_walks_count = 0;
try_mount_again:
#endif
full_path = NULL;
@@ -2525,6 +2534,16 @@ remote_path_check:
/* get referral if needed */
if (rc == -EREMOTE) {
#ifdef CONFIG_CIFS_DFS_UPCALL
+ if (referral_walks_count > MAX_NESTED_LINKS) {
+ /*
+ * BB: when we implement proper loop detection,
+ * we will remove this check. But now we need it
+ * to prevent an indefinite loop if 'DFS tree' is
+ * misconfigured (i.e. has loops).
+ */
+ rc = -ELOOP;
+ goto mount_fail_check;
+ }
/* convert forward to back slashes in prepath here if needed */
if ((cifs_sb->mnt_cifs_flags & CIFS_MOUNT_POSIX_PATHS) == 0)
convert_delimiter(cifs_sb->prepath,
@@ -2558,6 +2577,7 @@ remote_path_check:
cleanup_volume_info(&volume_info);
FreeXid(xid);
kfree(full_path);
+ referral_walks_count++;
goto try_mount_again;
}
#else /* No DFS support, return error on mount */
@@ -2592,1041 +2612,6 @@ out:
return rc;
}
-static int
-CIFSSessSetup(unsigned int xid, struct cifsSesInfo *ses,
- char session_key[CIFS_SESS_KEY_SIZE],
- const struct nls_table *nls_codepage)
-{
- struct smb_hdr *smb_buffer;
- struct smb_hdr *smb_buffer_response;
- SESSION_SETUP_ANDX *pSMB;
- SESSION_SETUP_ANDX *pSMBr;
- char *bcc_ptr;
- char *user;
- char *domain;
- int rc = 0;
- int remaining_words = 0;
- int bytes_returned = 0;
- int len;
- __u32 capabilities;
- __u16 count;
-
- cFYI(1, ("In sesssetup"));
- if (ses == NULL)
- return -EINVAL;
- user = ses->userName;
- domain = ses->domainName;
- smb_buffer = cifs_buf_get();
-
- if (smb_buffer == NULL)
- return -ENOMEM;
-
- smb_buffer_response = smb_buffer;
- pSMBr = pSMB = (SESSION_SETUP_ANDX *) smb_buffer;
-
- /* send SMBsessionSetup here */
- header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
- NULL /* no tCon exists yet */ , 13 /* wct */ );
-
- smb_buffer->Mid = GetNextMid(ses->server);
- pSMB->req_no_secext.AndXCommand = 0xFF;
- pSMB->req_no_secext.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
- pSMB->req_no_secext.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-
- if (ses->server->secMode &
- (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
- smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-
- capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
- CAP_LARGE_WRITE_X | CAP_LARGE_READ_X;
- if (ses->capabilities & CAP_UNICODE) {
- smb_buffer->Flags2 |= SMBFLG2_UNICODE;
- capabilities |= CAP_UNICODE;
- }
- if (ses->capabilities & CAP_STATUS32) {
- smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
- capabilities |= CAP_STATUS32;
- }
- if (ses->capabilities & CAP_DFS) {
- smb_buffer->Flags2 |= SMBFLG2_DFS;
- capabilities |= CAP_DFS;
- }
- pSMB->req_no_secext.Capabilities = cpu_to_le32(capabilities);
-
- pSMB->req_no_secext.CaseInsensitivePasswordLength =
- cpu_to_le16(CIFS_SESS_KEY_SIZE);
-
- pSMB->req_no_secext.CaseSensitivePasswordLength =
- cpu_to_le16(CIFS_SESS_KEY_SIZE);
- bcc_ptr = pByteArea(smb_buffer);
- memcpy(bcc_ptr, (char *) session_key, CIFS_SESS_KEY_SIZE);
- bcc_ptr += CIFS_SESS_KEY_SIZE;
- memcpy(bcc_ptr, (char *) session_key, CIFS_SESS_KEY_SIZE);
- bcc_ptr += CIFS_SESS_KEY_SIZE;
-
- if (ses->capabilities & CAP_UNICODE) {
- if ((long) bcc_ptr % 2) { /* must be word aligned for Unicode */
- *bcc_ptr = 0;
- bcc_ptr++;
- }
- if (user == NULL)
- bytes_returned = 0; /* skip null user */
- else
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, user, 100,
- nls_codepage);
- /* convert number of 16 bit words to bytes */
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2; /* trailing null */
- if (domain == NULL)
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr,
- "CIFS_LINUX_DOM", 32, nls_codepage);
- else
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, domain, 64,
- nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, "Linux version ",
- 32, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, utsname()->release,
- 32, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
- 64, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2;
- } else {
- if (user != NULL) {
- strncpy(bcc_ptr, user, 200);
- bcc_ptr += strnlen(user, 200);
- }
- *bcc_ptr = 0;
- bcc_ptr++;
- if (domain == NULL) {
- strcpy(bcc_ptr, "CIFS_LINUX_DOM");
- bcc_ptr += strlen("CIFS_LINUX_DOM") + 1;
- } else {
- strncpy(bcc_ptr, domain, 64);
- bcc_ptr += strnlen(domain, 64);
- *bcc_ptr = 0;
- bcc_ptr++;
- }
- strcpy(bcc_ptr, "Linux version ");
- bcc_ptr += strlen("Linux version ");
- strcpy(bcc_ptr, utsname()->release);
- bcc_ptr += strlen(utsname()->release) + 1;
- strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
- bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
- }
- count = (long) bcc_ptr - (long) pByteArea(smb_buffer);
- smb_buffer->smb_buf_length += count;
- pSMB->req_no_secext.ByteCount = cpu_to_le16(count);
-
- rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
- &bytes_returned, CIFS_LONG_OP);
- if (rc) {
-/* rc = map_smb_to_linux_error(smb_buffer_response); now done in SendReceive */
- } else if ((smb_buffer_response->WordCount == 3)
- || (smb_buffer_response->WordCount == 4)) {
- __u16 action = le16_to_cpu(pSMBr->resp.Action);
- __u16 blob_len = le16_to_cpu(pSMBr->resp.SecurityBlobLength);
- if (action & GUEST_LOGIN)
- cFYI(1, ("Guest login")); /* BB mark SesInfo struct? */
- ses->Suid = smb_buffer_response->Uid; /* UID left in wire format
- (little endian) */
- cFYI(1, ("UID = %d ", ses->Suid));
- /* response can have either 3 or 4 word count - Samba sends 3 */
- bcc_ptr = pByteArea(smb_buffer_response);
- if ((pSMBr->resp.hdr.WordCount == 3)
- || ((pSMBr->resp.hdr.WordCount == 4)
- && (blob_len < pSMBr->resp.ByteCount))) {
- if (pSMBr->resp.hdr.WordCount == 4)
- bcc_ptr += blob_len;
-
- if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
- if ((long) (bcc_ptr) % 2) {
- remaining_words =
- (BCC(smb_buffer_response) - 1) / 2;
- /* Unicode strings must be word
- aligned */
- bcc_ptr++;
- } else {
- remaining_words =
- BCC(smb_buffer_response) / 2;
- }
- len =
- UniStrnlen((wchar_t *) bcc_ptr,
- remaining_words - 1);
-/* We look for obvious messed up bcc or strings in response so we do not go off
- the end since (at least) WIN2K and Windows XP have a major bug in not null
- terminating last Unicode string in response */
- kfree(ses->serverOS);
- ses->serverOS = kzalloc(2 * (len + 1),
- GFP_KERNEL);
- if (ses->serverOS == NULL)
- goto sesssetup_nomem;
- cifs_strfromUCS_le(ses->serverOS,
- (__le16 *)bcc_ptr,
- len, nls_codepage);
- bcc_ptr += 2 * (len + 1);
- remaining_words -= len + 1;
- ses->serverOS[2 * len] = 0;
- ses->serverOS[1 + (2 * len)] = 0;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *)bcc_ptr,
- remaining_words-1);
- kfree(ses->serverNOS);
- ses->serverNOS = kzalloc(2 * (len + 1),
- GFP_KERNEL);
- if (ses->serverNOS == NULL)
- goto sesssetup_nomem;
- cifs_strfromUCS_le(ses->serverNOS,
- (__le16 *)bcc_ptr,
- len, nls_codepage);
- bcc_ptr += 2 * (len + 1);
- ses->serverNOS[2 * len] = 0;
- ses->serverNOS[1 + (2 * len)] = 0;
- if (strncmp(ses->serverNOS,
- "NT LAN Manager 4", 16) == 0) {
- cFYI(1, ("NT4 server"));
- ses->flags |= CIFS_SES_NT4;
- }
- remaining_words -= len + 1;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
- /* last string is not always null terminated
- (for e.g. for Windows XP & 2000) */
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2*(len+1),
- GFP_KERNEL);
- if (ses->serverDomain == NULL)
- goto sesssetup_nomem;
- cifs_strfromUCS_le(ses->serverDomain,
- (__le16 *)bcc_ptr,
- len, nls_codepage);
- bcc_ptr += 2 * (len + 1);
- ses->serverDomain[2*len] = 0;
- ses->serverDomain[1+(2*len)] = 0;
- } else { /* else no more room so create
- dummy domain string */
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2, GFP_KERNEL);
- }
- } else { /* no room so create dummy domain
- and NOS string */
-
- /* if these kcallocs fail not much we
- can do, but better to not fail the
- sesssetup itself */
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2, GFP_KERNEL);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(2, GFP_KERNEL);
- }
- } else { /* ASCII */
- len = strnlen(bcc_ptr, 1024);
- if (((long) bcc_ptr + len) - (long)
- pByteArea(smb_buffer_response)
- <= BCC(smb_buffer_response)) {
- kfree(ses->serverOS);
- ses->serverOS = kzalloc(len + 1,
- GFP_KERNEL);
- if (ses->serverOS == NULL)
- goto sesssetup_nomem;
- strncpy(ses->serverOS, bcc_ptr, len);
-
- bcc_ptr += len;
- /* null terminate the string */
- bcc_ptr[0] = 0;
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverNOS);
- ses->serverNOS = kzalloc(len + 1,
- GFP_KERNEL);
- if (ses->serverNOS == NULL)
- goto sesssetup_nomem;
- strncpy(ses->serverNOS, bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverDomain);
- ses->serverDomain = kzalloc(len + 1,
- GFP_KERNEL);
- if (ses->serverDomain == NULL)
- goto sesssetup_nomem;
- strncpy(ses->serverDomain, bcc_ptr,
- len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
- } else
- cFYI(1,
- ("Variable field of length %d "
- "extends beyond end of smb ",
- len));
- }
- } else {
- cERROR(1, ("Security Blob Length extends beyond "
- "end of SMB"));
- }
- } else {
- cERROR(1, ("Invalid Word count %d: ",
- smb_buffer_response->WordCount));
- rc = -EIO;
- }
-sesssetup_nomem: /* do not return an error on nomem for the info strings,
- since that could make reconnection harder, and
- reconnection might be needed to free memory */
- cifs_buf_release(smb_buffer);
-
- return rc;
-}
-
-static int
-CIFSNTLMSSPNegotiateSessSetup(unsigned int xid,
- struct cifsSesInfo *ses, bool *pNTLMv2_flag,
- const struct nls_table *nls_codepage)
-{
- struct smb_hdr *smb_buffer;
- struct smb_hdr *smb_buffer_response;
- SESSION_SETUP_ANDX *pSMB;
- SESSION_SETUP_ANDX *pSMBr;
- char *bcc_ptr;
- char *domain;
- int rc = 0;
- int remaining_words = 0;
- int bytes_returned = 0;
- int len;
- int SecurityBlobLength = sizeof(NEGOTIATE_MESSAGE);
- PNEGOTIATE_MESSAGE SecurityBlob;
- PCHALLENGE_MESSAGE SecurityBlob2;
- __u32 negotiate_flags, capabilities;
- __u16 count;
-
- cFYI(1, ("In NTLMSSP sesssetup (negotiate)"));
- if (ses == NULL)
- return -EINVAL;
- domain = ses->domainName;
- *pNTLMv2_flag = false;
- smb_buffer = cifs_buf_get();
- if (smb_buffer == NULL) {
- return -ENOMEM;
- }
- smb_buffer_response = smb_buffer;
- pSMB = (SESSION_SETUP_ANDX *) smb_buffer;
- pSMBr = (SESSION_SETUP_ANDX *) smb_buffer_response;
-
- /* send SMBsessionSetup here */
- header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
- NULL /* no tCon exists yet */ , 12 /* wct */ );
-
- smb_buffer->Mid = GetNextMid(ses->server);
- pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
- pSMB->req.hdr.Flags |= (SMBFLG_CASELESS | SMBFLG_CANONICAL_PATH_FORMAT);
-
- pSMB->req.AndXCommand = 0xFF;
- pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
- pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-
- if (ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
- smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-
- capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
- CAP_EXTENDED_SECURITY;
- if (ses->capabilities & CAP_UNICODE) {
- smb_buffer->Flags2 |= SMBFLG2_UNICODE;
- capabilities |= CAP_UNICODE;
- }
- if (ses->capabilities & CAP_STATUS32) {
- smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
- capabilities |= CAP_STATUS32;
- }
- if (ses->capabilities & CAP_DFS) {
- smb_buffer->Flags2 |= SMBFLG2_DFS;
- capabilities |= CAP_DFS;
- }
- pSMB->req.Capabilities = cpu_to_le32(capabilities);
-
- bcc_ptr = (char *) &pSMB->req.SecurityBlob;
- SecurityBlob = (PNEGOTIATE_MESSAGE) bcc_ptr;
- strncpy(SecurityBlob->Signature, NTLMSSP_SIGNATURE, 8);
- SecurityBlob->MessageType = NtLmNegotiate;
- negotiate_flags =
- NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_NEGOTIATE_OEM |
- NTLMSSP_REQUEST_TARGET | NTLMSSP_NEGOTIATE_NTLM |
- NTLMSSP_NEGOTIATE_56 |
- /* NTLMSSP_NEGOTIATE_ALWAYS_SIGN | */ NTLMSSP_NEGOTIATE_128;
- if (sign_CIFS_PDUs)
- negotiate_flags |= NTLMSSP_NEGOTIATE_SIGN;
-/* if (ntlmv2_support)
- negotiate_flags |= NTLMSSP_NEGOTIATE_NTLMV2;*/
- /* setup pointers to domain name and workstation name */
- bcc_ptr += SecurityBlobLength;
-
- SecurityBlob->WorkstationName.Buffer = 0;
- SecurityBlob->WorkstationName.Length = 0;
- SecurityBlob->WorkstationName.MaximumLength = 0;
-
- /* Domain not sent on first Sesssetup in NTLMSSP, instead it is sent
- along with username on auth request (ie the response to challenge) */
- SecurityBlob->DomainName.Buffer = 0;
- SecurityBlob->DomainName.Length = 0;
- SecurityBlob->DomainName.MaximumLength = 0;
- if (ses->capabilities & CAP_UNICODE) {
- if ((long) bcc_ptr % 2) {
- *bcc_ptr = 0;
- bcc_ptr++;
- }
-
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, "Linux version ",
- 32, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, utsname()->release, 32,
- nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2; /* null terminate Linux version */
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
- 64, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- *(bcc_ptr + 1) = 0;
- *(bcc_ptr + 2) = 0;
- bcc_ptr += 2; /* null terminate network opsys string */
- *(bcc_ptr + 1) = 0;
- *(bcc_ptr + 2) = 0;
- bcc_ptr += 2; /* null domain */
- } else { /* ASCII */
- strcpy(bcc_ptr, "Linux version ");
- bcc_ptr += strlen("Linux version ");
- strcpy(bcc_ptr, utsname()->release);
- bcc_ptr += strlen(utsname()->release) + 1;
- strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
- bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
- bcc_ptr++; /* empty domain field */
- *bcc_ptr = 0;
- }
- SecurityBlob->NegotiateFlags = cpu_to_le32(negotiate_flags);
- pSMB->req.SecurityBlobLength = cpu_to_le16(SecurityBlobLength);
- count = (long) bcc_ptr - (long) pByteArea(smb_buffer);
- smb_buffer->smb_buf_length += count;
- pSMB->req.ByteCount = cpu_to_le16(count);
-
- rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
- &bytes_returned, CIFS_LONG_OP);
-
- if (smb_buffer_response->Status.CifsError ==
- cpu_to_le32(NT_STATUS_MORE_PROCESSING_REQUIRED))
- rc = 0;
-
- if (rc) {
-/* rc = map_smb_to_linux_error(smb_buffer_response); *//* done in SendReceive now */
- } else if ((smb_buffer_response->WordCount == 3)
- || (smb_buffer_response->WordCount == 4)) {
- __u16 action = le16_to_cpu(pSMBr->resp.Action);
- __u16 blob_len = le16_to_cpu(pSMBr->resp.SecurityBlobLength);
-
- if (action & GUEST_LOGIN)
- cFYI(1, ("Guest login"));
- /* Do we want to set anything in SesInfo struct when guest login? */
-
- bcc_ptr = pByteArea(smb_buffer_response);
- /* response can have either 3 or 4 word count - Samba sends 3 */
-
- SecurityBlob2 = (PCHALLENGE_MESSAGE) bcc_ptr;
- if (SecurityBlob2->MessageType != NtLmChallenge) {
- cFYI(1, ("Unexpected NTLMSSP message type received %d",
- SecurityBlob2->MessageType));
- } else if (ses) {
- ses->Suid = smb_buffer_response->Uid; /* UID left in le format */
- cFYI(1, ("UID = %d", ses->Suid));
- if ((pSMBr->resp.hdr.WordCount == 3)
- || ((pSMBr->resp.hdr.WordCount == 4)
- && (blob_len <
- pSMBr->resp.ByteCount))) {
-
- if (pSMBr->resp.hdr.WordCount == 4) {
- bcc_ptr += blob_len;
- cFYI(1, ("Security Blob Length %d",
- blob_len));
- }
-
- cFYI(1, ("NTLMSSP Challenge rcvd"));
-
- memcpy(ses->server->cryptKey,
- SecurityBlob2->Challenge,
- CIFS_CRYPTO_KEY_SIZE);
- if (SecurityBlob2->NegotiateFlags &
- cpu_to_le32(NTLMSSP_NEGOTIATE_NTLMV2))
- *pNTLMv2_flag = true;
-
- if ((SecurityBlob2->NegotiateFlags &
- cpu_to_le32(NTLMSSP_NEGOTIATE_ALWAYS_SIGN))
- || (sign_CIFS_PDUs > 1))
- ses->server->secMode |=
- SECMODE_SIGN_REQUIRED;
- if ((SecurityBlob2->NegotiateFlags &
- cpu_to_le32(NTLMSSP_NEGOTIATE_SIGN)) && (sign_CIFS_PDUs))
- ses->server->secMode |=
- SECMODE_SIGN_ENABLED;
-
- if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
- if ((long) (bcc_ptr) % 2) {
- remaining_words =
- (BCC(smb_buffer_response)
- - 1) / 2;
- /* Must word align unicode strings */
- bcc_ptr++;
- } else {
- remaining_words =
- BCC
- (smb_buffer_response) / 2;
- }
- len =
- UniStrnlen((wchar_t *) bcc_ptr,
- remaining_words - 1);
-/* We look for obvious messed up bcc or strings in response so we do not go off
- the end since (at least) WIN2K and Windows XP have a major bug in not null
- terminating last Unicode string in response */
- kfree(ses->serverOS);
- ses->serverOS =
- kzalloc(2 * (len + 1), GFP_KERNEL);
- cifs_strfromUCS_le(ses->serverOS,
- (__le16 *)
- bcc_ptr, len,
- nls_codepage);
- bcc_ptr += 2 * (len + 1);
- remaining_words -= len + 1;
- ses->serverOS[2 * len] = 0;
- ses->serverOS[1 + (2 * len)] = 0;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *)
- bcc_ptr,
- remaining_words
- - 1);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(2 * (len + 1),
- GFP_KERNEL);
- cifs_strfromUCS_le(ses->
- serverNOS,
- (__le16 *)
- bcc_ptr,
- len,
- nls_codepage);
- bcc_ptr += 2 * (len + 1);
- ses->serverNOS[2 * len] = 0;
- ses->serverNOS[1 +
- (2 * len)] = 0;
- remaining_words -= len + 1;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
- /* last string not always null terminated
- (for e.g. for Windows XP & 2000) */
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2 *
- (len +
- 1),
- GFP_KERNEL);
- cifs_strfromUCS_le
- (ses->serverDomain,
- (__le16 *)bcc_ptr,
- len, nls_codepage);
- bcc_ptr +=
- 2 * (len + 1);
- ses->serverDomain[2*len]
- = 0;
- ses->serverDomain
- [1 + (2 * len)]
- = 0;
- } /* else no more room so create dummy domain string */
- else {
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2,
- GFP_KERNEL);
- }
- } else { /* no room so create dummy domain and NOS string */
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2, GFP_KERNEL);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(2, GFP_KERNEL);
- }
- } else { /* ASCII */
- len = strnlen(bcc_ptr, 1024);
- if (((long) bcc_ptr + len) - (long)
- pByteArea(smb_buffer_response)
- <= BCC(smb_buffer_response)) {
- kfree(ses->serverOS);
- ses->serverOS =
- kzalloc(len + 1,
- GFP_KERNEL);
- strncpy(ses->serverOS,
- bcc_ptr, len);
-
- bcc_ptr += len;
- bcc_ptr[0] = 0; /* null terminate string */
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(len + 1,
- GFP_KERNEL);
- strncpy(ses->serverNOS, bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(len + 1,
- GFP_KERNEL);
- strncpy(ses->serverDomain,
- bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
- } else
- cFYI(1,
- ("field of length %d "
- "extends beyond end of smb",
- len));
- }
- } else {
- cERROR(1, ("Security Blob Length extends beyond"
- " end of SMB"));
- }
- } else {
- cERROR(1, ("No session structure passed in."));
- }
- } else {
- cERROR(1, ("Invalid Word count %d:",
- smb_buffer_response->WordCount));
- rc = -EIO;
- }
-
- cifs_buf_release(smb_buffer);
-
- return rc;
-}
-static int
-CIFSNTLMSSPAuthSessSetup(unsigned int xid, struct cifsSesInfo *ses,
- char *ntlm_session_key, bool ntlmv2_flag,
- const struct nls_table *nls_codepage)
-{
- struct smb_hdr *smb_buffer;
- struct smb_hdr *smb_buffer_response;
- SESSION_SETUP_ANDX *pSMB;
- SESSION_SETUP_ANDX *pSMBr;
- char *bcc_ptr;
- char *user;
- char *domain;
- int rc = 0;
- int remaining_words = 0;
- int bytes_returned = 0;
- int len;
- int SecurityBlobLength = sizeof(AUTHENTICATE_MESSAGE);
- PAUTHENTICATE_MESSAGE SecurityBlob;
- __u32 negotiate_flags, capabilities;
- __u16 count;
-
- cFYI(1, ("In NTLMSSPSessSetup (Authenticate)"));
- if (ses == NULL)
- return -EINVAL;
- user = ses->userName;
- domain = ses->domainName;
- smb_buffer = cifs_buf_get();
- if (smb_buffer == NULL) {
- return -ENOMEM;
- }
- smb_buffer_response = smb_buffer;
- pSMB = (SESSION_SETUP_ANDX *)smb_buffer;
- pSMBr = (SESSION_SETUP_ANDX *)smb_buffer_response;
-
- /* send SMBsessionSetup here */
- header_assemble(smb_buffer, SMB_COM_SESSION_SETUP_ANDX,
- NULL /* no tCon exists yet */ , 12 /* wct */ );
-
- smb_buffer->Mid = GetNextMid(ses->server);
- pSMB->req.hdr.Flags |= (SMBFLG_CASELESS | SMBFLG_CANONICAL_PATH_FORMAT);
- pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
- pSMB->req.AndXCommand = 0xFF;
- pSMB->req.MaxBufferSize = cpu_to_le16(ses->server->maxBuf);
- pSMB->req.MaxMpxCount = cpu_to_le16(ses->server->maxReq);
-
- pSMB->req.hdr.Uid = ses->Suid;
-
- if (ses->server->secMode & (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
- smb_buffer->Flags2 |= SMBFLG2_SECURITY_SIGNATURE;
-
- capabilities = CAP_LARGE_FILES | CAP_NT_SMBS | CAP_LEVEL_II_OPLOCKS |
- CAP_EXTENDED_SECURITY;
- if (ses->capabilities & CAP_UNICODE) {
- smb_buffer->Flags2 |= SMBFLG2_UNICODE;
- capabilities |= CAP_UNICODE;
- }
- if (ses->capabilities & CAP_STATUS32) {
- smb_buffer->Flags2 |= SMBFLG2_ERR_STATUS;
- capabilities |= CAP_STATUS32;
- }
- if (ses->capabilities & CAP_DFS) {
- smb_buffer->Flags2 |= SMBFLG2_DFS;
- capabilities |= CAP_DFS;
- }
- pSMB->req.Capabilities = cpu_to_le32(capabilities);
-
- bcc_ptr = (char *)&pSMB->req.SecurityBlob;
- SecurityBlob = (PAUTHENTICATE_MESSAGE)bcc_ptr;
- strncpy(SecurityBlob->Signature, NTLMSSP_SIGNATURE, 8);
- SecurityBlob->MessageType = NtLmAuthenticate;
- bcc_ptr += SecurityBlobLength;
- negotiate_flags = NTLMSSP_NEGOTIATE_UNICODE | NTLMSSP_REQUEST_TARGET |
- NTLMSSP_NEGOTIATE_NTLM | NTLMSSP_NEGOTIATE_TARGET_INFO |
- 0x80000000 | NTLMSSP_NEGOTIATE_128;
- if (sign_CIFS_PDUs)
- negotiate_flags |= /* NTLMSSP_NEGOTIATE_ALWAYS_SIGN |*/ NTLMSSP_NEGOTIATE_SIGN;
- if (ntlmv2_flag)
- negotiate_flags |= NTLMSSP_NEGOTIATE_NTLMV2;
-
-/* setup pointers to domain name and workstation name */
-
- SecurityBlob->WorkstationName.Buffer = 0;
- SecurityBlob->WorkstationName.Length = 0;
- SecurityBlob->WorkstationName.MaximumLength = 0;
- SecurityBlob->SessionKey.Length = 0;
- SecurityBlob->SessionKey.MaximumLength = 0;
- SecurityBlob->SessionKey.Buffer = 0;
-
- SecurityBlob->LmChallengeResponse.Length = 0;
- SecurityBlob->LmChallengeResponse.MaximumLength = 0;
- SecurityBlob->LmChallengeResponse.Buffer = 0;
-
- SecurityBlob->NtChallengeResponse.Length =
- cpu_to_le16(CIFS_SESS_KEY_SIZE);
- SecurityBlob->NtChallengeResponse.MaximumLength =
- cpu_to_le16(CIFS_SESS_KEY_SIZE);
- memcpy(bcc_ptr, ntlm_session_key, CIFS_SESS_KEY_SIZE);
- SecurityBlob->NtChallengeResponse.Buffer =
- cpu_to_le32(SecurityBlobLength);
- SecurityBlobLength += CIFS_SESS_KEY_SIZE;
- bcc_ptr += CIFS_SESS_KEY_SIZE;
-
- if (ses->capabilities & CAP_UNICODE) {
- if (domain == NULL) {
- SecurityBlob->DomainName.Buffer = 0;
- SecurityBlob->DomainName.Length = 0;
- SecurityBlob->DomainName.MaximumLength = 0;
- } else {
- __u16 ln = cifs_strtoUCS((__le16 *) bcc_ptr, domain, 64,
- nls_codepage);
- ln *= 2;
- SecurityBlob->DomainName.MaximumLength =
- cpu_to_le16(ln);
- SecurityBlob->DomainName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += ln;
- SecurityBlobLength += ln;
- SecurityBlob->DomainName.Length = cpu_to_le16(ln);
- }
- if (user == NULL) {
- SecurityBlob->UserName.Buffer = 0;
- SecurityBlob->UserName.Length = 0;
- SecurityBlob->UserName.MaximumLength = 0;
- } else {
- __u16 ln = cifs_strtoUCS((__le16 *) bcc_ptr, user, 64,
- nls_codepage);
- ln *= 2;
- SecurityBlob->UserName.MaximumLength =
- cpu_to_le16(ln);
- SecurityBlob->UserName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += ln;
- SecurityBlobLength += ln;
- SecurityBlob->UserName.Length = cpu_to_le16(ln);
- }
-
- /* SecurityBlob->WorkstationName.Length =
- cifs_strtoUCS((__le16 *) bcc_ptr, "AMACHINE",64, nls_codepage);
- SecurityBlob->WorkstationName.Length *= 2;
- SecurityBlob->WorkstationName.MaximumLength =
- cpu_to_le16(SecurityBlob->WorkstationName.Length);
- SecurityBlob->WorkstationName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += SecurityBlob->WorkstationName.Length;
- SecurityBlobLength += SecurityBlob->WorkstationName.Length;
- SecurityBlob->WorkstationName.Length =
- cpu_to_le16(SecurityBlob->WorkstationName.Length); */
-
- if ((long) bcc_ptr % 2) {
- *bcc_ptr = 0;
- bcc_ptr++;
- }
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, "Linux version ",
- 32, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, utsname()->release, 32,
- nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- bcc_ptr += 2; /* null term version string */
- bytes_returned =
- cifs_strtoUCS((__le16 *) bcc_ptr, CIFS_NETWORK_OPSYS,
- 64, nls_codepage);
- bcc_ptr += 2 * bytes_returned;
- *(bcc_ptr + 1) = 0;
- *(bcc_ptr + 2) = 0;
- bcc_ptr += 2; /* null terminate network opsys string */
- *(bcc_ptr + 1) = 0;
- *(bcc_ptr + 2) = 0;
- bcc_ptr += 2; /* null domain */
- } else { /* ASCII */
- if (domain == NULL) {
- SecurityBlob->DomainName.Buffer = 0;
- SecurityBlob->DomainName.Length = 0;
- SecurityBlob->DomainName.MaximumLength = 0;
- } else {
- __u16 ln;
- negotiate_flags |= NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED;
- strncpy(bcc_ptr, domain, 63);
- ln = strnlen(domain, 64);
- SecurityBlob->DomainName.MaximumLength =
- cpu_to_le16(ln);
- SecurityBlob->DomainName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += ln;
- SecurityBlobLength += ln;
- SecurityBlob->DomainName.Length = cpu_to_le16(ln);
- }
- if (user == NULL) {
- SecurityBlob->UserName.Buffer = 0;
- SecurityBlob->UserName.Length = 0;
- SecurityBlob->UserName.MaximumLength = 0;
- } else {
- __u16 ln;
- strncpy(bcc_ptr, user, 63);
- ln = strnlen(user, 64);
- SecurityBlob->UserName.MaximumLength = cpu_to_le16(ln);
- SecurityBlob->UserName.Buffer =
- cpu_to_le32(SecurityBlobLength);
- bcc_ptr += ln;
- SecurityBlobLength += ln;
- SecurityBlob->UserName.Length = cpu_to_le16(ln);
- }
- /* BB fill in our workstation name if known BB */
-
- strcpy(bcc_ptr, "Linux version ");
- bcc_ptr += strlen("Linux version ");
- strcpy(bcc_ptr, utsname()->release);
- bcc_ptr += strlen(utsname()->release) + 1;
- strcpy(bcc_ptr, CIFS_NETWORK_OPSYS);
- bcc_ptr += strlen(CIFS_NETWORK_OPSYS) + 1;
- bcc_ptr++; /* null domain */
- *bcc_ptr = 0;
- }
- SecurityBlob->NegotiateFlags = cpu_to_le32(negotiate_flags);
- pSMB->req.SecurityBlobLength = cpu_to_le16(SecurityBlobLength);
- count = (long) bcc_ptr - (long) pByteArea(smb_buffer);
- smb_buffer->smb_buf_length += count;
- pSMB->req.ByteCount = cpu_to_le16(count);
-
- rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response,
- &bytes_returned, CIFS_LONG_OP);
- if (rc) {
-/* rc = map_smb_to_linux_error(smb_buffer_response) done in SendReceive now */
- } else if ((smb_buffer_response->WordCount == 3) ||
- (smb_buffer_response->WordCount == 4)) {
- __u16 action = le16_to_cpu(pSMBr->resp.Action);
- __u16 blob_len = le16_to_cpu(pSMBr->resp.SecurityBlobLength);
- if (action & GUEST_LOGIN)
- cFYI(1, ("Guest login")); /* BB Should we set anything
- in SesInfo struct ? */
-/* if (SecurityBlob2->MessageType != NtLm??) {
- cFYI("Unexpected message type on auth response is %d"));
- } */
-
- if (ses) {
- cFYI(1,
- ("Check challenge UID %d vs auth response UID %d",
- ses->Suid, smb_buffer_response->Uid));
- /* UID left in wire format */
- ses->Suid = smb_buffer_response->Uid;
- bcc_ptr = pByteArea(smb_buffer_response);
- /* response can have either 3 or 4 word count - Samba sends 3 */
- if ((pSMBr->resp.hdr.WordCount == 3)
- || ((pSMBr->resp.hdr.WordCount == 4)
- && (blob_len <
- pSMBr->resp.ByteCount))) {
- if (pSMBr->resp.hdr.WordCount == 4) {
- bcc_ptr +=
- blob_len;
- cFYI(1,
- ("Security Blob Length %d ",
- blob_len));
- }
-
- cFYI(1,
- ("NTLMSSP response to Authenticate "));
-
- if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
- if ((long) (bcc_ptr) % 2) {
- remaining_words =
- (BCC(smb_buffer_response)
- - 1) / 2;
- bcc_ptr++; /* Unicode strings must be word aligned */
- } else {
- remaining_words = BCC(smb_buffer_response) / 2;
- }
- len = UniStrnlen((wchar_t *) bcc_ptr,
- remaining_words - 1);
-/* We look for obvious messed up bcc or strings in response so we do not go off
- the end since (at least) WIN2K and Windows XP have a major bug in not null
- terminating last Unicode string in response */
- kfree(ses->serverOS);
- ses->serverOS =
- kzalloc(2 * (len + 1), GFP_KERNEL);
- cifs_strfromUCS_le(ses->serverOS,
- (__le16 *)
- bcc_ptr, len,
- nls_codepage);
- bcc_ptr += 2 * (len + 1);
- remaining_words -= len + 1;
- ses->serverOS[2 * len] = 0;
- ses->serverOS[1 + (2 * len)] = 0;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *)
- bcc_ptr,
- remaining_words
- - 1);
- kfree(ses->serverNOS);
- ses->serverNOS =
- kzalloc(2 * (len + 1),
- GFP_KERNEL);
- cifs_strfromUCS_le(ses->
- serverNOS,
- (__le16 *)
- bcc_ptr,
- len,
- nls_codepage);
- bcc_ptr += 2 * (len + 1);
- ses->serverNOS[2 * len] = 0;
- ses->serverNOS[1+(2*len)] = 0;
- remaining_words -= len + 1;
- if (remaining_words > 0) {
- len = UniStrnlen((wchar_t *) bcc_ptr, remaining_words);
- /* last string not always null terminated (e.g. for Windows XP & 2000) */
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(2 *
- (len +
- 1),
- GFP_KERNEL);
- cifs_strfromUCS_le
- (ses->
- serverDomain,
- (__le16 *)
- bcc_ptr, len,
- nls_codepage);
- bcc_ptr +=
- 2 * (len + 1);
- ses->
- serverDomain[2
- * len]
- = 0;
- ses->
- serverDomain[1
- +
- (2
- *
- len)]
- = 0;
- } /* else no more room so create dummy domain string */
- else {
- kfree(ses->serverDomain);
- ses->serverDomain = kzalloc(2,GFP_KERNEL);
- }
- } else { /* no room so create dummy domain and NOS string */
- kfree(ses->serverDomain);
- ses->serverDomain = kzalloc(2, GFP_KERNEL);
- kfree(ses->serverNOS);
- ses->serverNOS = kzalloc(2, GFP_KERNEL);
- }
- } else { /* ASCII */
- len = strnlen(bcc_ptr, 1024);
- if (((long) bcc_ptr + len) -
- (long) pByteArea(smb_buffer_response)
- <= BCC(smb_buffer_response)) {
- kfree(ses->serverOS);
- ses->serverOS = kzalloc(len + 1, GFP_KERNEL);
- strncpy(ses->serverOS,bcc_ptr, len);
-
- bcc_ptr += len;
- bcc_ptr[0] = 0; /* null terminate the string */
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverNOS);
- ses->serverNOS = kzalloc(len+1,
- GFP_KERNEL);
- strncpy(ses->serverNOS,
- bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
-
- len = strnlen(bcc_ptr, 1024);
- kfree(ses->serverDomain);
- ses->serverDomain =
- kzalloc(len+1,
- GFP_KERNEL);
- strncpy(ses->serverDomain,
- bcc_ptr, len);
- bcc_ptr += len;
- bcc_ptr[0] = 0;
- bcc_ptr++;
- } else
- cFYI(1, ("field of length %d "
- "extends beyond end of smb ",
- len));
- }
- } else {
- cERROR(1, ("Security Blob extends beyond end "
- "of SMB"));
- }
- } else {
- cERROR(1, ("No session structure passed in."));
- }
- } else {
- cERROR(1, ("Invalid Word count %d: ",
- smb_buffer_response->WordCount));
- rc = -EIO;
- }
-
- cifs_buf_release(smb_buffer);
-
- return rc;
-}
-
int
CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
const char *tree, struct cifsTconInfo *tcon,
@@ -3638,7 +2623,7 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
TCONX_RSP *pSMBr;
unsigned char *bcc_ptr;
int rc = 0;
- int length;
+ int length, bytes_left;
__u16 count;
if (ses == NULL)
@@ -3726,14 +2711,22 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
rc = SendReceive(xid, ses, smb_buffer, smb_buffer_response, &length,
CIFS_STD_OP);
- /* if (rc) rc = map_smb_to_linux_error(smb_buffer_response); */
/* above now done in SendReceive */
if ((rc == 0) && (tcon != NULL)) {
+ bool is_unicode;
+
tcon->tidStatus = CifsGood;
tcon->need_reconnect = false;
tcon->tid = smb_buffer_response->Tid;
bcc_ptr = pByteArea(smb_buffer_response);
- length = strnlen(bcc_ptr, BCC(smb_buffer_response) - 2);
+ bytes_left = BCC(smb_buffer_response);
+ length = strnlen(bcc_ptr, bytes_left - 2);
+ if (smb_buffer->Flags2 & SMBFLG2_UNICODE)
+ is_unicode = true;
+ else
+ is_unicode = false;
+
+
/* skip service field (NB: this field is always ASCII) */
if (length == 3) {
if ((bcc_ptr[0] == 'I') && (bcc_ptr[1] == 'P') &&
@@ -3748,39 +2741,16 @@ CIFSTCon(unsigned int xid, struct cifsSesInfo *ses,
}
}
bcc_ptr += length + 1;
+ bytes_left -= (length + 1);
strncpy(tcon->treeName, tree, MAX_TREE_SIZE);
- if (smb_buffer->Flags2 & SMBFLG2_UNICODE) {
- length = UniStrnlen((wchar_t *) bcc_ptr, 512);
- if ((bcc_ptr + (2 * length)) -
- pByteArea(smb_buffer_response) <=
- BCC(smb_buffer_response)) {
- kfree(tcon->nativeFileSystem);
- tcon->nativeFileSystem =
- kzalloc((4 * length) + 2, GFP_KERNEL);
- if (tcon->nativeFileSystem) {
- cifs_strfromUCS_le(
- tcon->nativeFileSystem,
- (__le16 *) bcc_ptr,
- length, nls_codepage);
- cFYI(1, ("nativeFileSystem=%s",
- tcon->nativeFileSystem));
- }
- }
- /* else do not bother copying these information fields*/
- } else {
- length = strnlen(bcc_ptr, 1024);
- if ((bcc_ptr + length) -
- pByteArea(smb_buffer_response) <=
- BCC(smb_buffer_response)) {
- kfree(tcon->nativeFileSystem);
- tcon->nativeFileSystem =
- kzalloc(length + 1, GFP_KERNEL);
- if (tcon->nativeFileSystem)
- strncpy(tcon->nativeFileSystem, bcc_ptr,
- length);
- }
- /* else do not bother copying these information fields*/
- }
+
+ /* mostly informational -- no need to fail on error here */
+ tcon->nativeFileSystem = cifs_strndup_from_ucs(bcc_ptr,
+ bytes_left, is_unicode,
+ nls_codepage);
+
+ cFYI(1, ("nativeFileSystem=%s", tcon->nativeFileSystem));
+
if ((smb_buffer_response->WordCount == 3) ||
(smb_buffer_response->WordCount == 7))
/* field is in same location */
@@ -3819,8 +2789,6 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo,
struct nls_table *nls_info)
{
int rc = 0;
- char ntlm_session_key[CIFS_SESS_KEY_SIZE];
- bool ntlmv2_flag = false;
int first_time = 0;
struct TCP_Server_Info *server = pSesInfo->server;
@@ -3852,83 +2820,19 @@ int cifs_setup_session(unsigned int xid, struct cifsSesInfo *pSesInfo,
pSesInfo->capabilities = server->capabilities;
if (linuxExtEnabled == 0)
pSesInfo->capabilities &= (~CAP_UNIX);
- /* pSesInfo->sequence_number = 0;*/
+
cFYI(1, ("Security Mode: 0x%x Capabilities: 0x%x TimeAdjust: %d",
server->secMode, server->capabilities, server->timeAdj));
- if (experimEnabled < 2)
- rc = CIFS_SessSetup(xid, pSesInfo, first_time, nls_info);
- else if (extended_security
- && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
- && (server->secType == NTLMSSP)) {
- rc = -EOPNOTSUPP;
- } else if (extended_security
- && (pSesInfo->capabilities & CAP_EXTENDED_SECURITY)
- && (server->secType == RawNTLMSSP)) {
- cFYI(1, ("NTLMSSP sesssetup"));
- rc = CIFSNTLMSSPNegotiateSessSetup(xid, pSesInfo, &ntlmv2_flag,
- nls_info);
- if (!rc) {
- if (ntlmv2_flag) {
- char *v2_response;
- cFYI(1, ("more secure NTLM ver2 hash"));
- if (CalcNTLMv2_partial_mac_key(pSesInfo,
- nls_info)) {
- rc = -ENOMEM;
- goto ss_err_exit;
- } else
- v2_response = kmalloc(16 + 64 /* blob*/,
- GFP_KERNEL);
- if (v2_response) {
- CalcNTLMv2_response(pSesInfo,
- v2_response);
- /* if (first_time)
- cifs_calculate_ntlmv2_mac_key */
- kfree(v2_response);
- /* BB Put dummy sig in SessSetup PDU? */
- } else {
- rc = -ENOMEM;
- goto ss_err_exit;
- }
-
- } else {
- SMBNTencrypt(pSesInfo->password,
- server->cryptKey,
- ntlm_session_key);
-
- if (first_time)
- cifs_calculate_mac_key(
- &server->mac_signing_key,
- ntlm_session_key,
- pSesInfo->password);
- }
- /* for better security the weaker lanman hash not sent
- in AuthSessSetup so we no longer calculate it */
-
- rc = CIFSNTLMSSPAuthSessSetup(xid, pSesInfo,
- ntlm_session_key,
- ntlmv2_flag,
- nls_info);
- }
- } else { /* old style NTLM 0.12 session setup */
- SMBNTencrypt(pSesInfo->password, server->cryptKey,
- ntlm_session_key);
-
- if (first_time)
- cifs_calculate_mac_key(&server->mac_signing_key,
- ntlm_session_key,
- pSesInfo->password);
-
- rc = CIFSSessSetup(xid, pSesInfo, ntlm_session_key, nls_info);
- }
+ rc = CIFS_SessSetup(xid, pSesInfo, first_time, nls_info);
if (rc) {
cERROR(1, ("Send error in SessSetup = %d", rc));
} else {
cFYI(1, ("CIFS Session Established successfully"));
- spin_lock(&GlobalMid_Lock);
- pSesInfo->status = CifsGood;
- pSesInfo->need_reconnect = false;
- spin_unlock(&GlobalMid_Lock);
+ spin_lock(&GlobalMid_Lock);
+ pSesInfo->status = CifsGood;
+ pSesInfo->need_reconnect = false;
+ spin_unlock(&GlobalMid_Lock);
}
ss_err_exit:
diff --git a/fs/cifs/dir.c b/fs/cifs/dir.c
index 461750e0136..3758965d73d 100644
--- a/fs/cifs/dir.c
+++ b/fs/cifs/dir.c
@@ -225,6 +225,7 @@ int cifs_posix_open(char *full_path, struct inode **pinode,
if (!(oflags & FMODE_READ))
write_only = true;
+ mode &= ~current_umask();
rc = CIFSPOSIXCreate(xid, cifs_sb->tcon, posix_flags, mode,
pnetfid, presp_data, &oplock, full_path,
cifs_sb->local_nls, cifs_sb->mnt_cifs_flags &
@@ -281,6 +282,7 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
int create_options = CREATE_NOT_DIR;
int oplock = 0;
int oflags;
+ bool posix_create = false;
/*
* BB below access is probably too much for mknod to request
* but we have to do query and setpathinfo so requesting
@@ -309,7 +311,6 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
return -ENOMEM;
}
- mode &= ~current_umask();
if (oplockEnabled)
oplock = REQ_OPLOCK;
@@ -328,12 +329,14 @@ cifs_create(struct inode *inode, struct dentry *direntry, int mode,
negotation. EREMOTE indicates DFS junction, which is not
handled in posix open */
- if ((rc == 0) && (newinode == NULL))
- goto cifs_create_get_file_info; /* query inode info */
- else if (rc == 0) /* success, no need to query */
- goto cifs_create_set_dentry;
- else if ((rc != -EIO) && (rc != -EREMOTE) &&
- (rc != -EOPNOTSUPP)) /* path not found or net err */
+ if (rc == 0) {
+ posix_create = true;
+ if (newinode == NULL) /* query inode info */
+ goto cifs_create_get_file_info;
+ else /* success, no need to query */
+ goto cifs_create_set_dentry;
+ } else if ((rc != -EIO) && (rc != -EREMOTE) &&
+ (rc != -EOPNOTSUPP) && (rc != -EINVAL))
goto cifs_create_out;
/* else fallthrough to retry, using older open call, this is
case where server does not support this SMB level, and
@@ -464,7 +467,7 @@ cifs_create_set_dentry:
if ((nd == NULL) || (!(nd->flags & LOOKUP_OPEN))) {
/* mknod case - do not leave file open */
CIFSSMBClose(xid, tcon, fileHandle);
- } else if (newinode) {
+ } else if (!(posix_create) && (newinode)) {
cifs_fill_fileinfo(newinode, fileHandle,
cifs_sb->tcon, write_only);
}
@@ -606,7 +609,6 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
int xid;
int rc = 0; /* to get around spurious gcc warning, set to zero here */
int oplock = 0;
- int mode;
__u16 fileHandle = 0;
bool posix_open = false;
struct cifs_sb_info *cifs_sb;
@@ -655,30 +657,36 @@ cifs_lookup(struct inode *parent_dir_inode, struct dentry *direntry,
}
cFYI(1, ("Full path: %s inode = 0x%p", full_path, direntry->d_inode));
+ /* Posix open is only called (at lookup time) for file create now.
+ * For opens (rather than creates), because we do not know if it
+ * is a file or directory yet, and current Samba no longer allows
+ * us to do posix open on dirs, we could end up wasting an open call
+ * on what turns out to be a dir. For file opens, we wait to call posix
+ * open till cifs_open. It could be added here (lookup) in the future
+ * but the performance tradeoff of the extra network request when EISDIR
+ * or EACCES is returned would have to be weighed against the 50%
+ * reduction in network traffic in the other paths.
+ */
if (pTcon->unix_ext) {
if (!(nd->flags & (LOOKUP_PARENT | LOOKUP_DIRECTORY)) &&
- (nd->flags & LOOKUP_OPEN)) {
- if (!((nd->intent.open.flags & O_CREAT) &&
- (nd->intent.open.flags & O_EXCL))) {
- mode = nd->intent.open.create_mode &
- ~current_umask();
- rc = cifs_posix_open(full_path, &newInode,
- parent_dir_inode->i_sb, mode,
+ (nd->flags & LOOKUP_OPEN) && !pTcon->broken_posix_open &&
+ (nd->intent.open.flags & O_CREAT)) {
+ rc = cifs_posix_open(full_path, &newInode,
+ parent_dir_inode->i_sb,
+ nd->intent.open.create_mode,
nd->intent.open.flags, &oplock,
&fileHandle, xid);
- /*
- * This code works around a bug in
- * samba posix open in samba versions 3.3.1
- * and earlier where create works
- * but open fails with invalid parameter.
- * If either of these error codes are
- * returned, follow the normal lookup.
- * Otherwise, the error during posix open
- * is handled.
- */
- if ((rc != -EINVAL) && (rc != -EOPNOTSUPP))
- posix_open = true;
- }
+ /*
+ * The check below works around a bug in POSIX
+ * open in samba versions 3.3.1 and earlier where
+ * open could incorrectly fail with invalid parameter.
+ * If either that or op not supported returned, follow
+ * the normal lookup.
+ */
+ if ((rc == 0) || (rc == -ENOENT))
+ posix_open = true;
+ else if ((rc == -EINVAL) || (rc != -EOPNOTSUPP))
+ pTcon->broken_posix_open = true;
}
if (!posix_open)
rc = cifs_get_inode_info_unix(&newInode, full_path,
diff --git a/fs/cifs/file.c b/fs/cifs/file.c
index 50ca088d886..302ea15f02e 100644
--- a/fs/cifs/file.c
+++ b/fs/cifs/file.c
@@ -129,15 +129,8 @@ static inline int cifs_posix_open_inode_helper(struct inode *inode,
struct file *file, struct cifsInodeInfo *pCifsInode,
struct cifsFileInfo *pCifsFile, int oplock, u16 netfid)
{
- struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
-/* struct timespec temp; */ /* BB REMOVEME BB */
- file->private_data = kmalloc(sizeof(struct cifsFileInfo), GFP_KERNEL);
- if (file->private_data == NULL)
- return -ENOMEM;
- pCifsFile = cifs_init_private(file->private_data, inode, file, netfid);
write_lock(&GlobalSMBSeslock);
- list_add(&pCifsFile->tlist, &cifs_sb->tcon->openFileList);
pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
if (pCifsInode == NULL) {
@@ -145,17 +138,6 @@ static inline int cifs_posix_open_inode_helper(struct inode *inode,
return -EINVAL;
}
- /* want handles we can use to read with first
- in the list so we do not have to walk the
- list to search for one in write_begin */
- if ((file->f_flags & O_ACCMODE) == O_WRONLY) {
- list_add_tail(&pCifsFile->flist,
- &pCifsInode->openFileList);
- } else {
- list_add(&pCifsFile->flist,
- &pCifsInode->openFileList);
- }
-
if (pCifsInode->clientCanCacheRead) {
/* we have the inode open somewhere else
no need to discard cache data */
@@ -198,6 +180,38 @@ psx_client_can_cache:
return 0;
}
+static struct cifsFileInfo *
+cifs_fill_filedata(struct file *file)
+{
+ struct list_head *tmp;
+ struct cifsFileInfo *pCifsFile = NULL;
+ struct cifsInodeInfo *pCifsInode = NULL;
+
+ /* search inode for this file and fill in file->private_data */
+ pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
+ read_lock(&GlobalSMBSeslock);
+ list_for_each(tmp, &pCifsInode->openFileList) {
+ pCifsFile = list_entry(tmp, struct cifsFileInfo, flist);
+ if ((pCifsFile->pfile == NULL) &&
+ (pCifsFile->pid == current->tgid)) {
+ /* mode set in cifs_create */
+
+ /* needed for writepage */
+ pCifsFile->pfile = file;
+ file->private_data = pCifsFile;
+ break;
+ }
+ }
+ read_unlock(&GlobalSMBSeslock);
+
+ if (file->private_data != NULL) {
+ return pCifsFile;
+ } else if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL))
+ cERROR(1, ("could not find file instance for "
+ "new file %p", file));
+ return NULL;
+}
+
/* all arguments to this function must be checked for validity in caller */
static inline int cifs_open_inode_helper(struct inode *inode, struct file *file,
struct cifsInodeInfo *pCifsInode, struct cifsFileInfo *pCifsFile,
@@ -272,7 +286,6 @@ int cifs_open(struct inode *inode, struct file *file)
struct cifsTconInfo *tcon;
struct cifsFileInfo *pCifsFile;
struct cifsInodeInfo *pCifsInode;
- struct list_head *tmp;
char *full_path = NULL;
int desiredAccess;
int disposition;
@@ -284,32 +297,12 @@ int cifs_open(struct inode *inode, struct file *file)
cifs_sb = CIFS_SB(inode->i_sb);
tcon = cifs_sb->tcon;
- /* search inode for this file and fill in file->private_data */
pCifsInode = CIFS_I(file->f_path.dentry->d_inode);
- read_lock(&GlobalSMBSeslock);
- list_for_each(tmp, &pCifsInode->openFileList) {
- pCifsFile = list_entry(tmp, struct cifsFileInfo,
- flist);
- if ((pCifsFile->pfile == NULL) &&
- (pCifsFile->pid == current->tgid)) {
- /* mode set in cifs_create */
-
- /* needed for writepage */
- pCifsFile->pfile = file;
-
- file->private_data = pCifsFile;
- break;
- }
- }
- read_unlock(&GlobalSMBSeslock);
-
- if (file->private_data != NULL) {
- rc = 0;
+ pCifsFile = cifs_fill_filedata(file);
+ if (pCifsFile) {
FreeXid(xid);
- return rc;
- } else if ((file->f_flags & O_CREAT) && (file->f_flags & O_EXCL))
- cERROR(1, ("could not find file instance for "
- "new file %p", file));
+ return 0;
+ }
full_path = build_path_from_dentry(file->f_path.dentry);
if (full_path == NULL) {
@@ -339,6 +332,7 @@ int cifs_open(struct inode *inode, struct file *file)
/* no need for special case handling of setting mode
on read only files needed here */
+ pCifsFile = cifs_fill_filedata(file);
cifs_posix_open_inode_helper(inode, file, pCifsInode,
pCifsFile, oplock, netfid);
goto out;
diff --git a/fs/cifs/inode.c b/fs/cifs/inode.c
index f36b4e40e44..9c869a6dcba 100644
--- a/fs/cifs/inode.c
+++ b/fs/cifs/inode.c
@@ -962,13 +962,21 @@ undo_setattr:
goto out_close;
}
+
+/*
+ * If dentry->d_inode is null (usually meaning the cached dentry
+ * is a negative dentry) then we would attempt a standard SMB delete, but
+ * if that fails we can not attempt the fall back mechanisms on EACESS
+ * but will return the EACESS to the caller. Note that the VFS does not call
+ * unlink on negative dentries currently.
+ */
int cifs_unlink(struct inode *dir, struct dentry *dentry)
{
int rc = 0;
int xid;
char *full_path = NULL;
struct inode *inode = dentry->d_inode;
- struct cifsInodeInfo *cifsInode = CIFS_I(inode);
+ struct cifsInodeInfo *cifs_inode;
struct super_block *sb = dir->i_sb;
struct cifs_sb_info *cifs_sb = CIFS_SB(sb);
struct cifsTconInfo *tcon = cifs_sb->tcon;
@@ -1012,7 +1020,7 @@ psx_del_no_retry:
rc = cifs_rename_pending_delete(full_path, dentry, xid);
if (rc == 0)
drop_nlink(inode);
- } else if (rc == -EACCES && dosattr == 0) {
+ } else if ((rc == -EACCES) && (dosattr == 0) && inode) {
attrs = kzalloc(sizeof(*attrs), GFP_KERNEL);
if (attrs == NULL) {
rc = -ENOMEM;
@@ -1020,7 +1028,8 @@ psx_del_no_retry:
}
/* try to reset dos attributes */
- origattr = cifsInode->cifsAttrs;
+ cifs_inode = CIFS_I(inode);
+ origattr = cifs_inode->cifsAttrs;
if (origattr == 0)
origattr |= ATTR_NORMAL;
dosattr = origattr & ~ATTR_READONLY;
@@ -1041,13 +1050,13 @@ psx_del_no_retry:
out_reval:
if (inode) {
- cifsInode = CIFS_I(inode);
- cifsInode->time = 0; /* will force revalidate to get info
+ cifs_inode = CIFS_I(inode);
+ cifs_inode->time = 0; /* will force revalidate to get info
when needed */
inode->i_ctime = current_fs_time(sb);
}
dir->i_ctime = dir->i_mtime = current_fs_time(sb);
- cifsInode = CIFS_I(dir);
+ cifs_inode = CIFS_I(dir);
CIFS_I(dir)->time = 0; /* force revalidate of dir as well */
kfree(full_path);
diff --git a/fs/cifs/link.c b/fs/cifs/link.c
index 63f644000ce..cd83c53fcbb 100644
--- a/fs/cifs/link.c
+++ b/fs/cifs/link.c
@@ -107,63 +107,51 @@ void *
cifs_follow_link(struct dentry *direntry, struct nameidata *nd)
{
struct inode *inode = direntry->d_inode;
- int rc = -EACCES;
+ int rc = -ENOMEM;
int xid;
char *full_path = NULL;
- char *target_path = ERR_PTR(-ENOMEM);
- struct cifs_sb_info *cifs_sb;
- struct cifsTconInfo *pTcon;
+ char *target_path = NULL;
+ struct cifs_sb_info *cifs_sb = CIFS_SB(inode->i_sb);
+ struct cifsTconInfo *tcon = cifs_sb->tcon;
xid = GetXid();
- full_path = build_path_from_dentry(direntry);
-
- if (!full_path)
- goto out_no_free;
-
- cFYI(1, ("Full path: %s inode = 0x%p", full_path, inode));
- cifs_sb = CIFS_SB(inode->i_sb);
- pTcon = cifs_sb->tcon;
- target_path = kmalloc(PATH_MAX, GFP_KERNEL);
- if (!target_path) {
- target_path = ERR_PTR(-ENOMEM);
+ /*
+ * For now, we just handle symlinks with unix extensions enabled.
+ * Eventually we should handle NTFS reparse points, and MacOS
+ * symlink support. For instance...
+ *
+ * rc = CIFSSMBQueryReparseLinkInfo(...)
+ *
+ * For now, just return -EACCES when the server doesn't support posix
+ * extensions. Note that we still allow querying symlinks when posix
+ * extensions are manually disabled. We could disable these as well
+ * but there doesn't seem to be any harm in allowing the client to
+ * read them.
+ */
+ if (!(tcon->ses->capabilities & CAP_UNIX)) {
+ rc = -EACCES;
goto out;
}
- /* We could change this to:
- if (pTcon->unix_ext)
- but there does not seem any point in refusing to
- get symlink info if we can, even if unix extensions
- turned off for this mount */
-
- if (pTcon->ses->capabilities & CAP_UNIX)
- rc = CIFSSMBUnixQuerySymLink(xid, pTcon, full_path,
- target_path,
- PATH_MAX-1,
- cifs_sb->local_nls);
- else {
- /* BB add read reparse point symlink code here */
- /* rc = CIFSSMBQueryReparseLinkInfo */
- /* BB Add code to Query ReparsePoint info */
- /* BB Add MAC style xsymlink check here if enabled */
- }
-
- if (rc == 0) {
+ full_path = build_path_from_dentry(direntry);
+ if (!full_path)
+ goto out;
-/* BB Add special case check for Samba DFS symlinks */
+ cFYI(1, ("Full path: %s inode = 0x%p", full_path, inode));
- target_path[PATH_MAX-1] = 0;
- } else {
+ rc = CIFSSMBUnixQuerySymLink(xid, tcon, full_path, &target_path,
+ cifs_sb->local_nls);
+ kfree(full_path);
+out:
+ if (rc != 0) {
kfree(target_path);
target_path = ERR_PTR(rc);
}
-out:
- kfree(full_path);
-out_no_free:
FreeXid(xid);
nd_set_link(nd, target_path);
- return NULL; /* No cookie */
+ return NULL;
}
int
@@ -224,98 +212,6 @@ cifs_symlink(struct inode *inode, struct dentry *direntry, const char *symname)
return rc;
}
-int
-cifs_readlink(struct dentry *direntry, char __user *pBuffer, int buflen)
-{
- struct inode *inode = direntry->d_inode;
- int rc = -EACCES;
- int xid;
- int oplock = 0;
- struct cifs_sb_info *cifs_sb;
- struct cifsTconInfo *pTcon;
- char *full_path = NULL;
- char *tmpbuffer;
- int len;
- __u16 fid;
-
- xid = GetXid();
- cifs_sb = CIFS_SB(inode->i_sb);
- pTcon = cifs_sb->tcon;
-
-/* BB would it be safe against deadlock to grab this sem
- even though rename itself grabs the sem and calls lookup? */
-/* mutex_lock(&inode->i_sb->s_vfs_rename_mutex);*/
- full_path = build_path_from_dentry(direntry);
-/* mutex_unlock(&inode->i_sb->s_vfs_rename_mutex);*/
-
- if (full_path == NULL) {
- FreeXid(xid);
- return -ENOMEM;
- }
-
- cFYI(1,
- ("Full path: %s inode = 0x%p pBuffer = 0x%p buflen = %d",
- full_path, inode, pBuffer, buflen));
- if (buflen > PATH_MAX)
- len = PATH_MAX;
- else
- len = buflen;
- tmpbuffer = kmalloc(len, GFP_KERNEL);
- if (tmpbuffer == NULL) {
- kfree(full_path);
- FreeXid(xid);
- return -ENOMEM;
- }
-
-/* BB add read reparse point symlink code and
- Unix extensions symlink code here BB */
-/* We could disable this based on pTcon->unix_ext flag instead ... but why? */
- if (cifs_sb->tcon->ses->capabilities & CAP_UNIX)
- rc = CIFSSMBUnixQuerySymLink(xid, pTcon, full_path,
- tmpbuffer,
- len - 1,
- cifs_sb->local_nls);
- else if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_UNX_EMUL) {
- cERROR(1, ("SFU style symlinks not implemented yet"));
- /* add open and read as in fs/cifs/inode.c */
- } else {
- rc = CIFSSMBOpen(xid, pTcon, full_path, FILE_OPEN, GENERIC_READ,
- OPEN_REPARSE_POINT, &fid, &oplock, NULL,
- cifs_sb->local_nls,
- cifs_sb->mnt_cifs_flags &
- CIFS_MOUNT_MAP_SPECIAL_CHR);
- if (!rc) {
- rc = CIFSSMBQueryReparseLinkInfo(xid, pTcon, full_path,
- tmpbuffer,
- len - 1,
- fid,
- cifs_sb->local_nls);
- if (CIFSSMBClose(xid, pTcon, fid)) {
- cFYI(1, ("Error closing junction point "
- "(open for ioctl)"));
- }
- /* If it is a DFS junction earlier we would have gotten
- PATH_NOT_COVERED returned from server so we do
- not need to request the DFS info here */
- }
- }
- /* BB Anything else to do to handle recursive links? */
- /* BB Should we be using page ops here? */
-
- /* BB null terminate returned string in pBuffer? BB */
- if (rc == 0) {
- rc = vfs_readlink(direntry, pBuffer, len, tmpbuffer);
- cFYI(1,
- ("vfs_readlink called from cifs_readlink returned %d",
- rc));
- }
-
- kfree(tmpbuffer);
- kfree(full_path);
- FreeXid(xid);
- return rc;
-}
-
void cifs_put_link(struct dentry *direntry, struct nameidata *nd, void *cookie)
{
char *p = nd_get_link(nd);
diff --git a/fs/cifs/misc.c b/fs/cifs/misc.c
index 4c89c572891..e079a9190ec 100644
--- a/fs/cifs/misc.c
+++ b/fs/cifs/misc.c
@@ -635,77 +635,6 @@ dump_smb(struct smb_hdr *smb_buf, int smb_buf_length)
return;
}
-/* Windows maps these to the user defined 16 bit Unicode range since they are
- reserved symbols (along with \ and /), otherwise illegal to store
- in filenames in NTFS */
-#define UNI_ASTERIK (__u16) ('*' + 0xF000)
-#define UNI_QUESTION (__u16) ('?' + 0xF000)
-#define UNI_COLON (__u16) (':' + 0xF000)
-#define UNI_GRTRTHAN (__u16) ('>' + 0xF000)
-#define UNI_LESSTHAN (__u16) ('<' + 0xF000)
-#define UNI_PIPE (__u16) ('|' + 0xF000)
-#define UNI_SLASH (__u16) ('\\' + 0xF000)
-
-/* Convert 16 bit Unicode pathname from wire format to string in current code
- page. Conversion may involve remapping up the seven characters that are
- only legal in POSIX-like OS (if they are present in the string). Path
- names are little endian 16 bit Unicode on the wire */
-int
-cifs_convertUCSpath(char *target, const __le16 *source, int maxlen,
- const struct nls_table *cp)
-{
- int i, j, len;
- __u16 src_char;
-
- for (i = 0, j = 0; i < maxlen; i++) {
- src_char = le16_to_cpu(source[i]);
- switch (src_char) {
- case 0:
- goto cUCS_out; /* BB check this BB */
- case UNI_COLON:
- target[j] = ':';
- break;
- case UNI_ASTERIK:
- target[j] = '*';
- break;
- case UNI_QUESTION:
- target[j] = '?';
- break;
- /* BB We can not handle remapping slash until
- all the calls to build_path_from_dentry
- are modified, as they use slash as separator BB */
- /* case UNI_SLASH:
- target[j] = '\\';
- break;*/
- case UNI_PIPE:
- target[j] = '|';
- break;
- case UNI_GRTRTHAN:
- target[j] = '>';
- break;
- case UNI_LESSTHAN:
- target[j] = '<';
- break;
- default:
- len = cp->uni2char(src_char, &target[j],
- NLS_MAX_CHARSET_SIZE);
- if (len > 0) {
- j += len;
- continue;
- } else {
- target[j] = '?';
- }
- }
- j++;
- /* make sure we do not overrun callers allocated temp buffer */
- if (j >= (2 * NAME_MAX))
- break;
- }
-cUCS_out:
- target[j] = 0;
- return j;
-}
-
/* Convert 16 bit Unicode pathname to wire format from string in current code
page. Conversion may involve remapping up the seven characters that are
only legal in POSIX-like OS (if they are present in the string). Path
diff --git a/fs/cifs/netmisc.c b/fs/cifs/netmisc.c
index 8703d68f5b2..e2fe998989a 100644
--- a/fs/cifs/netmisc.c
+++ b/fs/cifs/netmisc.c
@@ -79,6 +79,7 @@ static const struct smb_to_posix_error mapping_table_ERRDOS[] = {
{ErrQuota, -EDQUOT},
{ErrNotALink, -ENOLINK},
{ERRnetlogonNotStarted, -ENOPROTOOPT},
+ {ERRsymlink, -EOPNOTSUPP},
{ErrTooManyLinks, -EMLINK},
{0, 0}
};
@@ -714,6 +715,7 @@ static const struct {
ERRDOS, ERRnoaccess, 0xc000028f}, {
ERRDOS, ERRnoaccess, 0xc0000290}, {
ERRDOS, ERRbadfunc, 0xc000029c}, {
+ ERRDOS, ERRsymlink, NT_STATUS_STOPPED_ON_SYMLINK}, {
ERRDOS, ERRinvlevel, 0x007c0001}, };
/*****************************************************************************
diff --git a/fs/cifs/nterr.h b/fs/cifs/nterr.h
index 588abbb9d08..257267367d4 100644
--- a/fs/cifs/nterr.h
+++ b/fs/cifs/nterr.h
@@ -35,8 +35,6 @@ struct nt_err_code_struct {
extern const struct nt_err_code_struct nt_errs[];
/* Win32 Status codes. */
-
-#define STATUS_BUFFER_OVERFLOW 0x80000005
#define STATUS_MORE_ENTRIES 0x0105
#define ERROR_INVALID_PARAMETER 0x0057
#define ERROR_INSUFFICIENT_BUFFER 0x007a
@@ -50,6 +48,13 @@ extern const struct nt_err_code_struct nt_errs[];
#define STATUS_SOME_UNMAPPED 0x0107
#define STATUS_BUFFER_OVERFLOW 0x80000005
#define NT_STATUS_NO_MORE_ENTRIES 0x8000001a
+#define NT_STATUS_MEDIA_CHANGED 0x8000001c
+#define NT_STATUS_END_OF_MEDIA 0x8000001e
+#define NT_STATUS_MEDIA_CHECK 0x80000020
+#define NT_STATUS_NO_DATA_DETECTED 0x8000001c
+#define NT_STATUS_STOPPED_ON_SYMLINK 0x8000002d
+#define NT_STATUS_DEVICE_REQUIRES_CLEANING 0x80000288
+#define NT_STATUS_DEVICE_DOOR_OPEN 0x80000288
#define NT_STATUS_UNSUCCESSFUL 0xC0000000 | 0x0001
#define NT_STATUS_NOT_IMPLEMENTED 0xC0000000 | 0x0002
#define NT_STATUS_INVALID_INFO_CLASS 0xC0000000 | 0x0003
diff --git a/fs/cifs/ntlmssp.h b/fs/cifs/ntlmssp.h
index c377d8065d9..49c9a4e7531 100644
--- a/fs/cifs/ntlmssp.h
+++ b/fs/cifs/ntlmssp.h
@@ -27,29 +27,39 @@
#define UnknownMessage cpu_to_le32(8)
/* Negotiate Flags */
-#define NTLMSSP_NEGOTIATE_UNICODE 0x01 /* Text strings are in unicode */
-#define NTLMSSP_NEGOTIATE_OEM 0x02 /* Text strings are in OEM */
-#define NTLMSSP_REQUEST_TARGET 0x04 /* Server return its auth realm */
-#define NTLMSSP_NEGOTIATE_SIGN 0x0010 /* Request signature capability */
-#define NTLMSSP_NEGOTIATE_SEAL 0x0020 /* Request confidentiality */
-#define NTLMSSP_NEGOTIATE_DGRAM 0x0040
-#define NTLMSSP_NEGOTIATE_LM_KEY 0x0080 /* Sign/seal use LM session key */
-#define NTLMSSP_NEGOTIATE_NTLM 0x0200 /* NTLM authentication */
-#define NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED 0x1000
+#define NTLMSSP_NEGOTIATE_UNICODE 0x01 /* Text strings are unicode */
+#define NTLMSSP_NEGOTIATE_OEM 0x02 /* Text strings are in OEM */
+#define NTLMSSP_REQUEST_TARGET 0x04 /* Srv returns its auth realm */
+/* define reserved9 0x08 */
+#define NTLMSSP_NEGOTIATE_SIGN 0x0010 /* Request signing capability */
+#define NTLMSSP_NEGOTIATE_SEAL 0x0020 /* Request confidentiality */
+#define NTLMSSP_NEGOTIATE_DGRAM 0x0040
+#define NTLMSSP_NEGOTIATE_LM_KEY 0x0080 /* Use LM session key */
+/* defined reserved 8 0x0100 */
+#define NTLMSSP_NEGOTIATE_NTLM 0x0200 /* NTLM authentication */
+#define NTLMSSP_NEGOTIATE_NT_ONLY 0x0400 /* Lanman not allowed */
+#define NTLMSSP_ANONYMOUS 0x0800
+#define NTLMSSP_NEGOTIATE_DOMAIN_SUPPLIED 0x1000 /* reserved6 */
#define NTLMSSP_NEGOTIATE_WORKSTATION_SUPPLIED 0x2000
-#define NTLMSSP_NEGOTIATE_LOCAL_CALL 0x4000 /* client/server on same machine */
-#define NTLMSSP_NEGOTIATE_ALWAYS_SIGN 0x8000 /* Sign for all security levels */
-#define NTLMSSP_TARGET_TYPE_DOMAIN 0x10000
-#define NTLMSSP_TARGET_TYPE_SERVER 0x20000
-#define NTLMSSP_TARGET_TYPE_SHARE 0x40000
-#define NTLMSSP_NEGOTIATE_NTLMV2 0x80000
-#define NTLMSSP_REQUEST_INIT_RESP 0x100000
-#define NTLMSSP_REQUEST_ACCEPT_RESP 0x200000
-#define NTLMSSP_REQUEST_NOT_NT_KEY 0x400000
+#define NTLMSSP_NEGOTIATE_LOCAL_CALL 0x4000 /* client/server same machine */
+#define NTLMSSP_NEGOTIATE_ALWAYS_SIGN 0x8000 /* Sign. All security levels */
+#define NTLMSSP_TARGET_TYPE_DOMAIN 0x10000
+#define NTLMSSP_TARGET_TYPE_SERVER 0x20000
+#define NTLMSSP_TARGET_TYPE_SHARE 0x40000
+#define NTLMSSP_NEGOTIATE_EXTENDED_SEC 0x80000 /* NB:not related to NTLMv2 pwd*/
+/* #define NTLMSSP_REQUEST_INIT_RESP 0x100000 */
+#define NTLMSSP_NEGOTIATE_IDENTIFY 0x100000
+#define NTLMSSP_REQUEST_ACCEPT_RESP 0x200000 /* reserved5 */
+#define NTLMSSP_REQUEST_NON_NT_KEY 0x400000
#define NTLMSSP_NEGOTIATE_TARGET_INFO 0x800000
-#define NTLMSSP_NEGOTIATE_128 0x20000000
-#define NTLMSSP_NEGOTIATE_KEY_XCH 0x40000000
-#define NTLMSSP_NEGOTIATE_56 0x80000000
+/* #define reserved4 0x1000000 */
+#define NTLMSSP_NEGOTIATE_VERSION 0x2000000 /* we do not set */
+/* #define reserved3 0x4000000 */
+/* #define reserved2 0x8000000 */
+/* #define reserved1 0x10000000 */
+#define NTLMSSP_NEGOTIATE_128 0x20000000
+#define NTLMSSP_NEGOTIATE_KEY_XCH 0x40000000
+#define NTLMSSP_NEGOTIATE_56 0x80000000
/* Although typedefs are not commonly used for structure definitions */
/* in the Linux kernel, in this particular case they are useful */
@@ -60,32 +70,36 @@
typedef struct _SECURITY_BUFFER {
__le16 Length;
__le16 MaximumLength;
- __le32 Buffer; /* offset to buffer */
+ __le32 BufferOffset; /* offset to buffer */
} __attribute__((packed)) SECURITY_BUFFER;
typedef struct _NEGOTIATE_MESSAGE {
__u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
- __le32 MessageType; /* 1 */
+ __le32 MessageType; /* NtLmNegotiate = 1 */
__le32 NegotiateFlags;
SECURITY_BUFFER DomainName; /* RFC 1001 style and ASCII */
SECURITY_BUFFER WorkstationName; /* RFC 1001 and ASCII */
+ /* SECURITY_BUFFER for version info not present since we
+ do not set the version is present flag */
char DomainString[0];
/* followed by WorkstationString */
} __attribute__((packed)) NEGOTIATE_MESSAGE, *PNEGOTIATE_MESSAGE;
typedef struct _CHALLENGE_MESSAGE {
__u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
- __le32 MessageType; /* 2 */
+ __le32 MessageType; /* NtLmChallenge = 2 */
SECURITY_BUFFER TargetName;
__le32 NegotiateFlags;
__u8 Challenge[CIFS_CRYPTO_KEY_SIZE];
__u8 Reserved[8];
SECURITY_BUFFER TargetInfoArray;
+ /* SECURITY_BUFFER for version info not present since we
+ do not set the version is present flag */
} __attribute__((packed)) CHALLENGE_MESSAGE, *PCHALLENGE_MESSAGE;
typedef struct _AUTHENTICATE_MESSAGE {
- __u8 Signature[sizeof (NTLMSSP_SIGNATURE)];
- __le32 MessageType; /* 3 */
+ __u8 Signature[sizeof(NTLMSSP_SIGNATURE)];
+ __le32 MessageType; /* NtLmsAuthenticate = 3 */
SECURITY_BUFFER LmChallengeResponse;
SECURITY_BUFFER NtChallengeResponse;
SECURITY_BUFFER DomainName;
@@ -93,5 +107,7 @@ typedef struct _AUTHENTICATE_MESSAGE {
SECURITY_BUFFER WorkstationName;
SECURITY_BUFFER SessionKey;
__le32 NegotiateFlags;
+ /* SECURITY_BUFFER for version info not present since we
+ do not set the version is present flag */
char UserString[0];
} __attribute__((packed)) AUTHENTICATE_MESSAGE, *PAUTHENTICATE_MESSAGE;
diff --git a/fs/cifs/readdir.c b/fs/cifs/readdir.c
index 1a8be622833..964e097c820 100644
--- a/fs/cifs/readdir.c
+++ b/fs/cifs/readdir.c
@@ -31,6 +31,13 @@
#include "cifs_fs_sb.h"
#include "cifsfs.h"
+/*
+ * To be safe - for UCS to UTF-8 with strings loaded with the rare long
+ * characters alloc more to account for such multibyte target UTF-8
+ * characters.
+ */
+#define UNICODE_NAME_MAX ((4 * NAME_MAX) + 2)
+
#ifdef CONFIG_CIFS_DEBUG2
static void dump_cifs_file_struct(struct file *file, char *label)
{
@@ -438,6 +445,38 @@ static void unix_fill_in_inode(struct inode *tmp_inode,
}
}
+/* BB eventually need to add the following helper function to
+ resolve NT_STATUS_STOPPED_ON_SYMLINK return code when
+ we try to do FindFirst on (NTFS) directory symlinks */
+/*
+int get_symlink_reparse_path(char *full_path, struct cifs_sb_info *cifs_sb,
+ int xid)
+{
+ __u16 fid;
+ int len;
+ int oplock = 0;
+ int rc;
+ struct cifsTconInfo *ptcon = cifs_sb->tcon;
+ char *tmpbuffer;
+
+ rc = CIFSSMBOpen(xid, ptcon, full_path, FILE_OPEN, GENERIC_READ,
+ OPEN_REPARSE_POINT, &fid, &oplock, NULL,
+ cifs_sb->local_nls,
+ cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR);
+ if (!rc) {
+ tmpbuffer = kmalloc(maxpath);
+ rc = CIFSSMBQueryReparseLinkInfo(xid, ptcon, full_path,
+ tmpbuffer,
+ maxpath -1,
+ fid,
+ cifs_sb->local_nls);
+ if (CIFSSMBClose(xid, ptcon, fid)) {
+ cFYI(1, ("Error closing temporary reparsepoint open)"));
+ }
+ }
+}
+ */
+
static int initiate_cifs_search(const int xid, struct file *file)
{
int rc = 0;
@@ -493,7 +532,10 @@ ffirst_retry:
CIFS_MOUNT_MAP_SPECIAL_CHR, CIFS_DIR_SEP(cifs_sb));
if (rc == 0)
cifsFile->invalidHandle = false;
- if ((rc == -EOPNOTSUPP) &&
+ /* BB add following call to handle readdir on new NTFS symlink errors
+ else if STATUS_STOPPED_ON_SYMLINK
+ call get_symlink_reparse_path and retry with new path */
+ else if ((rc == -EOPNOTSUPP) &&
(cifs_sb->mnt_cifs_flags & CIFS_MOUNT_SERVER_INUM)) {
cifs_sb->mnt_cifs_flags &= ~CIFS_MOUNT_SERVER_INUM;
goto ffirst_retry;
@@ -822,7 +864,7 @@ static int find_cifs_entry(const int xid, struct cifsTconInfo *pTcon,
/* inode num, inode type and filename returned */
static int cifs_get_name_from_search_buf(struct qstr *pqst,
char *current_entry, __u16 level, unsigned int unicode,
- struct cifs_sb_info *cifs_sb, int max_len, __u64 *pinum)
+ struct cifs_sb_info *cifs_sb, unsigned int max_len, __u64 *pinum)
{
int rc = 0;
unsigned int len = 0;
@@ -881,14 +923,12 @@ static int cifs_get_name_from_search_buf(struct qstr *pqst,
}
if (unicode) {
- /* BB fixme - test with long names */
- /* Note converted filename can be longer than in unicode */
- if (cifs_sb->mnt_cifs_flags & CIFS_MOUNT_MAP_SPECIAL_CHR)
- pqst->len = cifs_convertUCSpath((char *)pqst->name,
- (__le16 *)filename, len/2, nlt);
- else
- pqst->len = cifs_strfromUCS_le((char *)pqst->name,
- (__le16 *)filename, len/2, nlt);
+ pqst->len = cifs_from_ucs2((char *) pqst->name,
+ (__le16 *) filename,
+ UNICODE_NAME_MAX,
+ min(len, max_len), nlt,
+ cifs_sb->mnt_cifs_flags &
+ CIFS_MOUNT_MAP_SPECIAL_CHR);
} else {
pqst->name = filename;
pqst->len = len;
@@ -898,8 +938,8 @@ static int cifs_get_name_from_search_buf(struct qstr *pqst,
return rc;
}
-static int cifs_filldir(char *pfindEntry, struct file *file,
- filldir_t filldir, void *direntry, char *scratch_buf, int max_len)
+static int cifs_filldir(char *pfindEntry, struct file *file, filldir_t filldir,
+ void *direntry, char *scratch_buf, unsigned int max_len)
{
int rc = 0;
struct qstr qstring;
@@ -996,7 +1036,7 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir)
int num_to_fill = 0;
char *tmp_buf = NULL;
char *end_of_smb;
- int max_len;
+ unsigned int max_len;
xid = GetXid();
@@ -1070,11 +1110,7 @@ int cifs_readdir(struct file *file, void *direntry, filldir_t filldir)
cifsFile->srch_inf.ntwrk_buf_start);
end_of_smb = cifsFile->srch_inf.ntwrk_buf_start + max_len;
- /* To be safe - for UCS to UTF-8 with strings loaded
- with the rare long characters alloc more to account for
- such multibyte target UTF-8 characters. cifs_unicode.c,
- which actually does the conversion, has the same limit */
- tmp_buf = kmalloc((2 * NAME_MAX) + 4, GFP_KERNEL);
+ tmp_buf = kmalloc(UNICODE_NAME_MAX, GFP_KERNEL);
for (i = 0; (i < num_to_fill) && (rc == 0); i++) {
if (current_entry == NULL) {
/* evaluate whether this case is an error */
diff --git a/fs/cifs/sess.c b/fs/cifs/sess.c
index c652c73760d..897a052270f 100644
--- a/fs/cifs/sess.c
+++ b/fs/cifs/sess.c
@@ -3,7 +3,7 @@
*
* SMB/CIFS session setup handling routines
*
- * Copyright (c) International Business Machines Corp., 2006, 2007
+ * Copyright (c) International Business Machines Corp., 2006, 2009
* Author(s): Steve French (sfrench@us.ibm.com)
*
* This library is free software; you can redistribute it and/or modify
@@ -111,7 +111,7 @@ static __le16 get_next_vcnum(struct cifsSesInfo *ses)
get_vc_num_exit:
write_unlock(&cifs_tcp_ses_lock);
- return le16_to_cpu(vcnum);
+ return cpu_to_le16(vcnum);
}
static __u32 cifs_ssetup_hdr(struct cifsSesInfo *ses, SESSION_SETUP_ANDX *pSMB)
@@ -277,12 +277,11 @@ static void ascii_ssetup_strings(char **pbcc_area, struct cifsSesInfo *ses,
*pbcc_area = bcc_ptr;
}
-static int decode_unicode_ssetup(char **pbcc_area, int bleft,
- struct cifsSesInfo *ses,
- const struct nls_table *nls_cp)
+static void
+decode_unicode_ssetup(char **pbcc_area, int bleft, struct cifsSesInfo *ses,
+ const struct nls_table *nls_cp)
{
- int rc = 0;
- int words_left, len;
+ int len;
char *data = *pbcc_area;
cFYI(1, ("bleft %d", bleft));
@@ -300,63 +299,29 @@ static int decode_unicode_ssetup(char **pbcc_area, int bleft,
++bleft;
}
- words_left = bleft / 2;
-
- /* save off server operating system */
- len = UniStrnlen((wchar_t *) data, words_left);
-
- if (len >= words_left)
- return rc;
-
kfree(ses->serverOS);
- /* UTF-8 string will not grow more than four times as big as UCS-16 */
- ses->serverOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
- if (ses->serverOS != NULL) {
- cifs_strfromUCS_le(ses->serverOS, (__le16 *)data, len, nls_cp);
- cFYI(1, ("serverOS=%s", ses->serverOS));
- }
- data += 2 * (len + 1);
- words_left -= len + 1;
-
- /* save off server network operating system */
- len = UniStrnlen((wchar_t *) data, words_left);
-
- if (len >= words_left)
- return rc;
+ ses->serverOS = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
+ cFYI(1, ("serverOS=%s", ses->serverOS));
+ len = (UniStrnlen((wchar_t *) data, bleft / 2) * 2) + 2;
+ data += len;
+ bleft -= len;
+ if (bleft <= 0)
+ return;
kfree(ses->serverNOS);
- ses->serverNOS = kzalloc((4 * len) + 2 /* trailing null */, GFP_KERNEL);
- if (ses->serverNOS != NULL) {
- cifs_strfromUCS_le(ses->serverNOS, (__le16 *)data, len,
- nls_cp);
- cFYI(1, ("serverNOS=%s", ses->serverNOS));
- if (strncmp(ses->serverNOS, "NT LAN Manager 4", 16) == 0) {
- cFYI(1, ("NT4 server"));
- ses->flags |= CIFS_SES_NT4;
- }
- }
- data += 2 * (len + 1);
- words_left -= len + 1;
-
- /* save off server domain */
- len = UniStrnlen((wchar_t *) data, words_left);
-
- if (len > words_left)
- return rc;
+ ses->serverNOS = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
+ cFYI(1, ("serverNOS=%s", ses->serverNOS));
+ len = (UniStrnlen((wchar_t *) data, bleft / 2) * 2) + 2;
+ data += len;
+ bleft -= len;
+ if (bleft <= 0)
+ return;
kfree(ses->serverDomain);
- ses->serverDomain = kzalloc((4 * len) + 2, GFP_KERNEL);
- if (ses->serverDomain != NULL) {
- cifs_strfromUCS_le(ses->serverDomain, (__le16 *)data, len,
- nls_cp);
- cFYI(1, ("serverDomain=%s", ses->serverDomain));
- }
- data += 2 * (len + 1);
- words_left -= len + 1;
-
- cFYI(1, ("words left: %d", words_left));
+ ses->serverDomain = cifs_strndup_from_ucs(data, bleft, true, nls_cp);
+ cFYI(1, ("serverDomain=%s", ses->serverDomain));
- return rc;
+ return;
}
static int decode_ascii_ssetup(char **pbcc_area, int bleft,
@@ -413,6 +378,186 @@ static int decode_ascii_ssetup(char **pbcc_area, int bleft,
return rc;
}
+static int decode_ntlmssp_challenge(char *bcc_ptr, int blob_len,
+ struct cifsSesInfo *ses)
+{
+ CHALLENGE_MESSAGE *pblob = (CHALLENGE_MESSAGE *)bcc_ptr;
+
+ if (blob_len < sizeof(CHALLENGE_MESSAGE)) {
+ cERROR(1, ("challenge blob len %d too small", blob_len));
+ return -EINVAL;
+ }
+
+ if (memcmp(pblob->Signature, "NTLMSSP", 8)) {
+ cERROR(1, ("blob signature incorrect %s", pblob->Signature));
+ return -EINVAL;
+ }
+ if (pblob->MessageType != NtLmChallenge) {
+ cERROR(1, ("Incorrect message type %d", pblob->MessageType));
+ return -EINVAL;
+ }
+
+ memcpy(ses->server->cryptKey, pblob->Challenge, CIFS_CRYPTO_KEY_SIZE);
+ /* BB we could decode pblob->NegotiateFlags; some may be useful */
+ /* In particular we can examine sign flags */
+ /* BB spec says that if AvId field of MsvAvTimestamp is populated then
+ we must set the MIC field of the AUTHENTICATE_MESSAGE */
+
+ return 0;
+}
+
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+/* BB Move to ntlmssp.c eventually */
+
+/* We do not malloc the blob, it is passed in pbuffer, because
+ it is fixed size, and small, making this approach cleaner */
+static void build_ntlmssp_negotiate_blob(unsigned char *pbuffer,
+ struct cifsSesInfo *ses)
+{
+ NEGOTIATE_MESSAGE *sec_blob = (NEGOTIATE_MESSAGE *)pbuffer;
+ __u32 flags;
+
+ memcpy(sec_blob->Signature, NTLMSSP_SIGNATURE, 8);
+ sec_blob->MessageType = NtLmNegotiate;
+
+ /* BB is NTLMV2 session security format easier to use here? */
+ flags = NTLMSSP_NEGOTIATE_56 | NTLMSSP_REQUEST_TARGET |
+ NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE |
+ NTLMSSP_NEGOTIATE_NT_ONLY | NTLMSSP_NEGOTIATE_NTLM;
+ if (ses->server->secMode &
+ (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+ flags |= NTLMSSP_NEGOTIATE_SIGN;
+ if (ses->server->secMode & SECMODE_SIGN_REQUIRED)
+ flags |= NTLMSSP_NEGOTIATE_ALWAYS_SIGN;
+
+ sec_blob->NegotiateFlags |= cpu_to_le32(flags);
+
+ sec_blob->WorkstationName.BufferOffset = 0;
+ sec_blob->WorkstationName.Length = 0;
+ sec_blob->WorkstationName.MaximumLength = 0;
+
+ /* Domain name is sent on the Challenge not Negotiate NTLMSSP request */
+ sec_blob->DomainName.BufferOffset = 0;
+ sec_blob->DomainName.Length = 0;
+ sec_blob->DomainName.MaximumLength = 0;
+}
+
+/* We do not malloc the blob, it is passed in pbuffer, because its
+ maximum possible size is fixed and small, making this approach cleaner.
+ This function returns the length of the data in the blob */
+static int build_ntlmssp_auth_blob(unsigned char *pbuffer,
+ struct cifsSesInfo *ses,
+ const struct nls_table *nls_cp, int first)
+{
+ AUTHENTICATE_MESSAGE *sec_blob = (AUTHENTICATE_MESSAGE *)pbuffer;
+ __u32 flags;
+ unsigned char *tmp;
+ char ntlm_session_key[CIFS_SESS_KEY_SIZE];
+
+ memcpy(sec_blob->Signature, NTLMSSP_SIGNATURE, 8);
+ sec_blob->MessageType = NtLmAuthenticate;
+
+ flags = NTLMSSP_NEGOTIATE_56 |
+ NTLMSSP_REQUEST_TARGET | NTLMSSP_NEGOTIATE_TARGET_INFO |
+ NTLMSSP_NEGOTIATE_128 | NTLMSSP_NEGOTIATE_UNICODE |
+ NTLMSSP_NEGOTIATE_NT_ONLY | NTLMSSP_NEGOTIATE_NTLM;
+ if (ses->server->secMode &
+ (SECMODE_SIGN_REQUIRED | SECMODE_SIGN_ENABLED))
+ flags |= NTLMSSP_NEGOTIATE_SIGN;
+ if (ses->server->secMode & SECMODE_SIGN_REQUIRED)
+ flags |= NTLMSSP_NEGOTIATE_ALWAYS_SIGN;
+
+ tmp = pbuffer + sizeof(AUTHENTICATE_MESSAGE);
+ sec_blob->NegotiateFlags |= cpu_to_le32(flags);
+
+ sec_blob->LmChallengeResponse.BufferOffset =
+ cpu_to_le32(sizeof(AUTHENTICATE_MESSAGE));
+ sec_blob->LmChallengeResponse.Length = 0;
+ sec_blob->LmChallengeResponse.MaximumLength = 0;
+
+ /* calculate session key, BB what about adding similar ntlmv2 path? */
+ SMBNTencrypt(ses->password, ses->server->cryptKey, ntlm_session_key);
+ if (first)
+ cifs_calculate_mac_key(&ses->server->mac_signing_key,
+ ntlm_session_key, ses->password);
+
+ memcpy(tmp, ntlm_session_key, CIFS_SESS_KEY_SIZE);
+ sec_blob->NtChallengeResponse.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->NtChallengeResponse.Length = cpu_to_le16(CIFS_SESS_KEY_SIZE);
+ sec_blob->NtChallengeResponse.MaximumLength =
+ cpu_to_le16(CIFS_SESS_KEY_SIZE);
+
+ tmp += CIFS_SESS_KEY_SIZE;
+
+ if (ses->domainName == NULL) {
+ sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->DomainName.Length = 0;
+ sec_blob->DomainName.MaximumLength = 0;
+ tmp += 2;
+ } else {
+ int len;
+ len = cifs_strtoUCS((__le16 *)tmp, ses->domainName,
+ MAX_USERNAME_SIZE, nls_cp);
+ len *= 2; /* unicode is 2 bytes each */
+ len += 2; /* trailing null */
+ sec_blob->DomainName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->DomainName.Length = cpu_to_le16(len);
+ sec_blob->DomainName.MaximumLength = cpu_to_le16(len);
+ tmp += len;
+ }
+
+ if (ses->userName == NULL) {
+ sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->UserName.Length = 0;
+ sec_blob->UserName.MaximumLength = 0;
+ tmp += 2;
+ } else {
+ int len;
+ len = cifs_strtoUCS((__le16 *)tmp, ses->userName,
+ MAX_USERNAME_SIZE, nls_cp);
+ len *= 2; /* unicode is 2 bytes each */
+ len += 2; /* trailing null */
+ sec_blob->UserName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->UserName.Length = cpu_to_le16(len);
+ sec_blob->UserName.MaximumLength = cpu_to_le16(len);
+ tmp += len;
+ }
+
+ sec_blob->WorkstationName.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->WorkstationName.Length = 0;
+ sec_blob->WorkstationName.MaximumLength = 0;
+ tmp += 2;
+
+ sec_blob->SessionKey.BufferOffset = cpu_to_le32(tmp - pbuffer);
+ sec_blob->SessionKey.Length = 0;
+ sec_blob->SessionKey.MaximumLength = 0;
+ return tmp - pbuffer;
+}
+
+
+static void setup_ntlmssp_neg_req(SESSION_SETUP_ANDX *pSMB,
+ struct cifsSesInfo *ses)
+{
+ build_ntlmssp_negotiate_blob(&pSMB->req.SecurityBlob[0], ses);
+ pSMB->req.SecurityBlobLength = cpu_to_le16(sizeof(NEGOTIATE_MESSAGE));
+
+ return;
+}
+
+static int setup_ntlmssp_auth_req(SESSION_SETUP_ANDX *pSMB,
+ struct cifsSesInfo *ses,
+ const struct nls_table *nls, int first_time)
+{
+ int bloblen;
+
+ bloblen = build_ntlmssp_auth_blob(&pSMB->req.SecurityBlob[0], ses, nls,
+ first_time);
+ pSMB->req.SecurityBlobLength = cpu_to_le16(bloblen);
+
+ return bloblen;
+}
+#endif
+
int
CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
const struct nls_table *nls_cp)
@@ -431,6 +576,7 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
__u16 action;
int bytes_remaining;
struct key *spnego_key = NULL;
+ __le32 phase = NtLmNegotiate; /* NTLMSSP, if needed, is multistage */
if (ses == NULL)
return -EINVAL;
@@ -438,6 +584,10 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
type = ses->server->secType;
cFYI(1, ("sess setup type %d", type));
+ssetup_ntlmssp_authenticate:
+ if (phase == NtLmChallenge)
+ phase = NtLmAuthenticate; /* if ntlmssp, now final phase */
+
if (type == LANMAN) {
#ifndef CONFIG_CIFS_WEAK_PW_HASH
/* LANMAN and plaintext are less secure and off by default.
@@ -651,9 +801,53 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
goto ssetup_exit;
#endif /* CONFIG_CIFS_UPCALL */
} else {
+#ifdef CONFIG_CIFS_EXPERIMENTAL
+ if ((experimEnabled > 1) && (type == RawNTLMSSP)) {
+ if ((pSMB->req.hdr.Flags2 & SMBFLG2_UNICODE) == 0) {
+ cERROR(1, ("NTLMSSP requires Unicode support"));
+ rc = -ENOSYS;
+ goto ssetup_exit;
+ }
+
+ cFYI(1, ("ntlmssp session setup phase %d", phase));
+ pSMB->req.hdr.Flags2 |= SMBFLG2_EXT_SEC;
+ capabilities |= CAP_EXTENDED_SECURITY;
+ pSMB->req.Capabilities |= cpu_to_le32(capabilities);
+ if (phase == NtLmNegotiate) {
+ setup_ntlmssp_neg_req(pSMB, ses);
+ iov[1].iov_len = sizeof(NEGOTIATE_MESSAGE);
+ } else if (phase == NtLmAuthenticate) {
+ int blob_len;
+ blob_len = setup_ntlmssp_auth_req(pSMB, ses,
+ nls_cp,
+ first_time);
+ iov[1].iov_len = blob_len;
+ /* Make sure that we tell the server that we
+ are using the uid that it just gave us back
+ on the response (challenge) */
+ smb_buf->Uid = ses->Suid;
+ } else {
+ cERROR(1, ("invalid phase %d", phase));
+ rc = -ENOSYS;
+ goto ssetup_exit;
+ }
+ iov[1].iov_base = &pSMB->req.SecurityBlob[0];
+ /* unicode strings must be word aligned */
+ if ((iov[0].iov_len + iov[1].iov_len) % 2) {
+ *bcc_ptr = 0;
+ bcc_ptr++;
+ }
+ unicode_oslm_strings(&bcc_ptr, nls_cp);
+ } else {
+ cERROR(1, ("secType %d not supported!", type));
+ rc = -ENOSYS;
+ goto ssetup_exit;
+ }
+#else
cERROR(1, ("secType %d not supported!", type));
rc = -ENOSYS;
goto ssetup_exit;
+#endif
}
iov[2].iov_base = str_area;
@@ -669,12 +863,23 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
/* SMB request buf freed in SendReceive2 */
cFYI(1, ("ssetup rc from sendrecv2 is %d", rc));
- if (rc)
- goto ssetup_exit;
pSMB = (SESSION_SETUP_ANDX *)iov[0].iov_base;
smb_buf = (struct smb_hdr *)iov[0].iov_base;
+ if ((type == RawNTLMSSP) && (smb_buf->Status.CifsError ==
+ cpu_to_le32(NT_STATUS_MORE_PROCESSING_REQUIRED))) {
+ if (phase != NtLmNegotiate) {
+ cERROR(1, ("Unexpected more processing error"));
+ goto ssetup_exit;
+ }
+ /* NTLMSSP Negotiate sent now processing challenge (response) */
+ phase = NtLmChallenge; /* process ntlmssp challenge */
+ rc = 0; /* MORE_PROC rc is not an error here, but expected */
+ }
+ if (rc)
+ goto ssetup_exit;
+
if ((smb_buf->WordCount != 3) && (smb_buf->WordCount != 4)) {
rc = -EIO;
cERROR(1, ("bad word count %d", smb_buf->WordCount));
@@ -693,12 +898,18 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
if (smb_buf->WordCount == 4) {
__u16 blob_len;
blob_len = le16_to_cpu(pSMB->resp.SecurityBlobLength);
- bcc_ptr += blob_len;
if (blob_len > bytes_remaining) {
cERROR(1, ("bad security blob length %d", blob_len));
rc = -EINVAL;
goto ssetup_exit;
}
+ if (phase == NtLmChallenge) {
+ rc = decode_ntlmssp_challenge(bcc_ptr, blob_len, ses);
+ /* now goto beginning for ntlmssp authenticate phase */
+ if (rc)
+ goto ssetup_exit;
+ }
+ bcc_ptr += blob_len;
bytes_remaining -= blob_len;
}
@@ -709,8 +920,7 @@ CIFS_SessSetup(unsigned int xid, struct cifsSesInfo *ses, int first_time,
++bcc_ptr;
--bytes_remaining;
}
- rc = decode_unicode_ssetup(&bcc_ptr, bytes_remaining,
- ses, nls_cp);
+ decode_unicode_ssetup(&bcc_ptr, bytes_remaining, ses, nls_cp);
} else {
rc = decode_ascii_ssetup(&bcc_ptr, bytes_remaining,
ses, nls_cp);
@@ -728,5 +938,9 @@ ssetup_exit:
} else if (resp_buf_type == CIFS_LARGE_BUFFER)
cifs_buf_release(iov[0].iov_base);
+ /* if ntlmssp, and negotiate succeeded, proceed to authenticate phase */
+ if ((phase == NtLmChallenge) && (rc == 0))
+ goto ssetup_ntlmssp_authenticate;
+
return rc;
}
diff --git a/fs/cifs/smberr.h b/fs/cifs/smberr.h
index 7f50e8577c1..c5084d27db7 100644
--- a/fs/cifs/smberr.h
+++ b/fs/cifs/smberr.h
@@ -110,6 +110,7 @@
/* Below errors are used internally (do not come over the wire) for passthrough
from STATUS codes to POSIX only */
+#define ERRsymlink 0xFFFD
#define ErrTooManyLinks 0xFFFE
/* Following error codes may be generated with the ERRSRV error class.*/
diff --git a/fs/configfs/symlink.c b/fs/configfs/symlink.c
index 932a92b3148..c8afa6b1d91 100644
--- a/fs/configfs/symlink.c
+++ b/fs/configfs/symlink.c
@@ -135,7 +135,7 @@ int configfs_symlink(struct inode *dir, struct dentry *dentry, const char *symna
struct path path;
struct configfs_dirent *sd;
struct config_item *parent_item;
- struct config_item *target_item;
+ struct config_item *target_item = NULL;
struct config_item_type *type;
ret = -EPERM; /* What lack-of-symlink returns */
diff --git a/fs/dcache.c b/fs/dcache.c
index 1fcffebfb44..75659a6fd1f 100644
--- a/fs/dcache.c
+++ b/fs/dcache.c
@@ -481,7 +481,7 @@ restart:
if ((flags & DCACHE_REFERENCED)
&& (dentry->d_flags & DCACHE_REFERENCED)) {
dentry->d_flags &= ~DCACHE_REFERENCED;
- list_move_tail(&dentry->d_lru, &referenced);
+ list_move(&dentry->d_lru, &referenced);
spin_unlock(&dentry->d_lock);
} else {
list_move_tail(&dentry->d_lru, &tmp);
diff --git a/fs/devpts/inode.c b/fs/devpts/inode.c
index 63a4a59e414..c68edb96944 100644
--- a/fs/devpts/inode.c
+++ b/fs/devpts/inode.c
@@ -90,6 +90,15 @@ static inline struct super_block *pts_sb_from_inode(struct inode *inode)
#define PARSE_MOUNT 0
#define PARSE_REMOUNT 1
+/*
+ * parse_mount_options():
+ * Set @opts to mount options specified in @data. If an option is not
+ * specified in @data, set it to its default value. The exception is
+ * 'newinstance' option which can only be set/cleared on a mount (i.e.
+ * cannot be changed during remount).
+ *
+ * Note: @data may be NULL (in which case all options are set to default).
+ */
static int parse_mount_options(char *data, int op, struct pts_mount_opts *opts)
{
char *p;
@@ -355,12 +364,9 @@ static int devpts_get_sb(struct file_system_type *fs_type,
struct pts_mount_opts opts;
struct super_block *s;
- memset(&opts, 0, sizeof(opts));
- if (data) {
- error = parse_mount_options(data, PARSE_MOUNT, &opts);
- if (error)
- return error;
- }
+ error = parse_mount_options(data, PARSE_MOUNT, &opts);
+ if (error)
+ return error;
if (opts.newinstance)
s = sget(fs_type, NULL, set_anon_super, NULL);
@@ -389,11 +395,10 @@ static int devpts_get_sb(struct file_system_type *fs_type,
return 0;
out_dput:
- dput(s->s_root);
+ dput(s->s_root); /* undo dget() in simple_set_mnt() */
out_undo_sget:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
return error;
}
diff --git a/fs/ecryptfs/main.c b/fs/ecryptfs/main.c
index ccabd5faa04..9f0aa9883c2 100644
--- a/fs/ecryptfs/main.c
+++ b/fs/ecryptfs/main.c
@@ -614,9 +614,8 @@ static int ecryptfs_get_sb(struct file_system_type *fs_type, int flags,
}
goto out;
out_abort:
- dput(sb->s_root);
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ dput(sb->s_root); /* aka mnt->mnt_root, as set by get_sb_nodev() */
+ deactivate_locked_super(sb);
out:
return rc;
}
diff --git a/fs/eventpoll.c b/fs/eventpoll.c
index a89f370fadb..5458e80fc55 100644
--- a/fs/eventpoll.c
+++ b/fs/eventpoll.c
@@ -1212,7 +1212,7 @@ SYSCALL_DEFINE1(epoll_create1, int, flags)
SYSCALL_DEFINE1(epoll_create, int, size)
{
- if (size < 0)
+ if (size <= 0)
return -EINVAL;
return sys_epoll_create1(0);
diff --git a/fs/exec.c b/fs/exec.c
index a3a8ce83940..895823d0149 100644
--- a/fs/exec.c
+++ b/fs/exec.c
@@ -69,17 +69,18 @@ int suid_dumpable = 0;
static LIST_HEAD(formats);
static DEFINE_RWLOCK(binfmt_lock);
-int register_binfmt(struct linux_binfmt * fmt)
+int __register_binfmt(struct linux_binfmt * fmt, int insert)
{
if (!fmt)
return -EINVAL;
write_lock(&binfmt_lock);
- list_add(&fmt->lh, &formats);
+ insert ? list_add(&fmt->lh, &formats) :
+ list_add_tail(&fmt->lh, &formats);
write_unlock(&binfmt_lock);
return 0;
}
-EXPORT_SYMBOL(register_binfmt);
+EXPORT_SYMBOL(__register_binfmt);
void unregister_binfmt(struct linux_binfmt * fmt)
{
@@ -104,40 +105,28 @@ static inline void put_binfmt(struct linux_binfmt * fmt)
SYSCALL_DEFINE1(uselib, const char __user *, library)
{
struct file *file;
- struct nameidata nd;
char *tmp = getname(library);
int error = PTR_ERR(tmp);
- if (!IS_ERR(tmp)) {
- error = path_lookup_open(AT_FDCWD, tmp,
- LOOKUP_FOLLOW, &nd,
- FMODE_READ|FMODE_EXEC);
- putname(tmp);
- }
- if (error)
+ if (IS_ERR(tmp))
+ goto out;
+
+ file = do_filp_open(AT_FDCWD, tmp,
+ O_LARGEFILE | O_RDONLY | FMODE_EXEC, 0,
+ MAY_READ | MAY_EXEC | MAY_OPEN);
+ putname(tmp);
+ error = PTR_ERR(file);
+ if (IS_ERR(file))
goto out;
error = -EINVAL;
- if (!S_ISREG(nd.path.dentry->d_inode->i_mode))
+ if (!S_ISREG(file->f_path.dentry->d_inode->i_mode))
goto exit;
error = -EACCES;
- if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
- goto exit;
-
- error = inode_permission(nd.path.dentry->d_inode,
- MAY_READ | MAY_EXEC | MAY_OPEN);
- if (error)
- goto exit;
- error = ima_path_check(&nd.path, MAY_READ | MAY_EXEC | MAY_OPEN);
- if (error)
+ if (file->f_path.mnt->mnt_flags & MNT_NOEXEC)
goto exit;
- file = nameidata_to_filp(&nd, O_RDONLY|O_LARGEFILE);
- error = PTR_ERR(file);
- if (IS_ERR(file))
- goto out;
-
fsnotify_open(file->f_path.dentry);
error = -ENOEXEC;
@@ -159,13 +148,10 @@ SYSCALL_DEFINE1(uselib, const char __user *, library)
}
read_unlock(&binfmt_lock);
}
+exit:
fput(file);
out:
return error;
-exit:
- release_open_intent(&nd);
- path_put(&nd.path);
- goto out;
}
#ifdef CONFIG_MMU
@@ -660,47 +646,33 @@ EXPORT_SYMBOL(setup_arg_pages);
struct file *open_exec(const char *name)
{
- struct nameidata nd;
struct file *file;
int err;
- err = path_lookup_open(AT_FDCWD, name, LOOKUP_FOLLOW, &nd,
- FMODE_READ|FMODE_EXEC);
- if (err)
+ file = do_filp_open(AT_FDCWD, name,
+ O_LARGEFILE | O_RDONLY | FMODE_EXEC, 0,
+ MAY_EXEC | MAY_OPEN);
+ if (IS_ERR(file))
goto out;
err = -EACCES;
- if (!S_ISREG(nd.path.dentry->d_inode->i_mode))
- goto out_path_put;
-
- if (nd.path.mnt->mnt_flags & MNT_NOEXEC)
- goto out_path_put;
-
- err = inode_permission(nd.path.dentry->d_inode, MAY_EXEC | MAY_OPEN);
- if (err)
- goto out_path_put;
- err = ima_path_check(&nd.path, MAY_EXEC | MAY_OPEN);
- if (err)
- goto out_path_put;
+ if (!S_ISREG(file->f_path.dentry->d_inode->i_mode))
+ goto exit;
- file = nameidata_to_filp(&nd, O_RDONLY|O_LARGEFILE);
- if (IS_ERR(file))
- return file;
+ if (file->f_path.mnt->mnt_flags & MNT_NOEXEC)
+ goto exit;
fsnotify_open(file->f_path.dentry);
err = deny_write_access(file);
- if (err) {
- fput(file);
- goto out;
- }
+ if (err)
+ goto exit;
+out:
return file;
- out_path_put:
- release_open_intent(&nd);
- path_put(&nd.path);
- out:
+exit:
+ fput(file);
return ERR_PTR(err);
}
EXPORT_SYMBOL(open_exec);
diff --git a/fs/ext4/extents.c b/fs/ext4/extents.c
index e4033215834..e3a55eb8b26 100644
--- a/fs/ext4/extents.c
+++ b/fs/ext4/extents.c
@@ -1841,11 +1841,13 @@ ext4_ext_put_in_cache(struct inode *inode, ext4_lblk_t block,
{
struct ext4_ext_cache *cex;
BUG_ON(len == 0);
+ spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
cex = &EXT4_I(inode)->i_cached_extent;
cex->ec_type = type;
cex->ec_block = block;
cex->ec_len = len;
cex->ec_start = start;
+ spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
}
/*
@@ -1902,12 +1904,17 @@ ext4_ext_in_cache(struct inode *inode, ext4_lblk_t block,
struct ext4_extent *ex)
{
struct ext4_ext_cache *cex;
+ int ret = EXT4_EXT_CACHE_NO;
+ /*
+ * We borrow i_block_reservation_lock to protect i_cached_extent
+ */
+ spin_lock(&EXT4_I(inode)->i_block_reservation_lock);
cex = &EXT4_I(inode)->i_cached_extent;
/* has cache valid data? */
if (cex->ec_type == EXT4_EXT_CACHE_NO)
- return EXT4_EXT_CACHE_NO;
+ goto errout;
BUG_ON(cex->ec_type != EXT4_EXT_CACHE_GAP &&
cex->ec_type != EXT4_EXT_CACHE_EXTENT);
@@ -1918,11 +1925,11 @@ ext4_ext_in_cache(struct inode *inode, ext4_lblk_t block,
ext_debug("%u cached by %u:%u:%llu\n",
block,
cex->ec_block, cex->ec_len, cex->ec_start);
- return cex->ec_type;
+ ret = cex->ec_type;
}
-
- /* not in cache */
- return EXT4_EXT_CACHE_NO;
+errout:
+ spin_unlock(&EXT4_I(inode)->i_block_reservation_lock);
+ return ret;
}
/*
@@ -2875,6 +2882,8 @@ int ext4_ext_get_blocks(handle_t *handle, struct inode *inode,
if (allocated > max_blocks)
allocated = max_blocks;
set_buffer_unwritten(bh_result);
+ bh_result->b_bdev = inode->i_sb->s_bdev;
+ bh_result->b_blocknr = newblock;
goto out2;
}
diff --git a/fs/ext4/inode.c b/fs/ext4/inode.c
index e91f978c7f1..2a9ffd528dd 100644
--- a/fs/ext4/inode.c
+++ b/fs/ext4/inode.c
@@ -1149,6 +1149,7 @@ int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block,
int retval;
clear_buffer_mapped(bh);
+ clear_buffer_unwritten(bh);
/*
* Try to see if we can get the block without requesting
@@ -1179,6 +1180,18 @@ int ext4_get_blocks_wrap(handle_t *handle, struct inode *inode, sector_t block,
return retval;
/*
+ * When we call get_blocks without the create flag, the
+ * BH_Unwritten flag could have gotten set if the blocks
+ * requested were part of a uninitialized extent. We need to
+ * clear this flag now that we are committed to convert all or
+ * part of the uninitialized extent to be an initialized
+ * extent. This is because we need to avoid the combination
+ * of BH_Unwritten and BH_Mapped flags being simultaneously
+ * set on the buffer_head.
+ */
+ clear_buffer_unwritten(bh);
+
+ /*
* New blocks allocate and/or writing to uninitialized extent
* will possibly result in updating i_data, so we take
* the write lock of i_data_sem, and call get_blocks()
@@ -2297,6 +2310,10 @@ static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock,
struct buffer_head *bh_result, int create)
{
int ret = 0;
+ sector_t invalid_block = ~((sector_t) 0xffff);
+
+ if (invalid_block < ext4_blocks_count(EXT4_SB(inode->i_sb)->s_es))
+ invalid_block = ~0;
BUG_ON(create == 0);
BUG_ON(bh_result->b_size != inode->i_sb->s_blocksize);
@@ -2318,11 +2335,18 @@ static int ext4_da_get_block_prep(struct inode *inode, sector_t iblock,
/* not enough space to reserve */
return ret;
- map_bh(bh_result, inode->i_sb, 0);
+ map_bh(bh_result, inode->i_sb, invalid_block);
set_buffer_new(bh_result);
set_buffer_delay(bh_result);
} else if (ret > 0) {
bh_result->b_size = (ret << inode->i_blkbits);
+ /*
+ * With sub-block writes into unwritten extents
+ * we also need to mark the buffer as new so that
+ * the unwritten parts of the buffer gets correctly zeroed.
+ */
+ if (buffer_unwritten(bh_result))
+ set_buffer_new(bh_result);
ret = 0;
}
diff --git a/fs/fcntl.c b/fs/fcntl.c
index cc8e4de2fee..1ad703150de 100644
--- a/fs/fcntl.c
+++ b/fs/fcntl.c
@@ -117,11 +117,13 @@ SYSCALL_DEFINE2(dup2, unsigned int, oldfd, unsigned int, newfd)
{
if (unlikely(newfd == oldfd)) { /* corner case */
struct files_struct *files = current->files;
+ int retval = oldfd;
+
rcu_read_lock();
if (!fcheck_files(files, oldfd))
- oldfd = -EBADF;
+ retval = -EBADF;
rcu_read_unlock();
- return oldfd;
+ return retval;
}
return sys_dup3(oldfd, newfd, 0);
}
diff --git a/fs/fuse/inode.c b/fs/fuse/inode.c
index 459b73dd45e..91f7c85f1ff 100644
--- a/fs/fuse/inode.c
+++ b/fs/fuse/inode.c
@@ -19,6 +19,7 @@
#include <linux/random.h>
#include <linux/sched.h>
#include <linux/exportfs.h>
+#include <linux/smp_lock.h>
MODULE_AUTHOR("Miklos Szeredi <miklos@szeredi.hu>");
MODULE_DESCRIPTION("Filesystem in Userspace");
@@ -259,7 +260,9 @@ struct inode *fuse_iget(struct super_block *sb, u64 nodeid,
static void fuse_umount_begin(struct super_block *sb)
{
+ lock_kernel();
fuse_abort_conn(get_fuse_conn_super(sb));
+ unlock_kernel();
}
static void fuse_send_destroy(struct fuse_conn *fc)
@@ -908,6 +911,7 @@ static int fuse_fill_super(struct super_block *sb, void *data, int silent)
err_put_root:
dput(root_dentry);
err_put_conn:
+ bdi_destroy(&fc->bdi);
fuse_conn_put(fc);
err_fput:
fput(file);
diff --git a/fs/gfs2/glock.c b/fs/gfs2/glock.c
index 1afd9f26bcb..ff498109048 100644
--- a/fs/gfs2/glock.c
+++ b/fs/gfs2/glock.c
@@ -1304,6 +1304,7 @@ static int gfs2_shrink_glock_memory(int nr, gfp_t gfp_mask)
nr--;
if (queue_delayed_work(glock_workqueue, &gl->gl_work, 0) == 0)
gfs2_glock_put(gl);
+ got_ref = 0;
}
spin_lock(&lru_lock);
if (may_demote)
diff --git a/fs/gfs2/ops_fstype.c b/fs/gfs2/ops_fstype.c
index 650a730707b..1ff9473ea75 100644
--- a/fs/gfs2/ops_fstype.c
+++ b/fs/gfs2/ops_fstype.c
@@ -1282,21 +1282,21 @@ static int gfs2_get_sb(struct file_system_type *fs_type, int flags,
static struct super_block *get_gfs2_sb(const char *dev_name)
{
struct super_block *sb;
- struct nameidata nd;
+ struct path path;
int error;
- error = path_lookup(dev_name, LOOKUP_FOLLOW, &nd);
+ error = kern_path(dev_name, LOOKUP_FOLLOW, &path);
if (error) {
printk(KERN_WARNING "GFS2: path_lookup on %s returned error %d\n",
dev_name, error);
return NULL;
}
- sb = nd.path.dentry->d_inode->i_sb;
+ sb = path.dentry->d_inode->i_sb;
if (sb && (sb->s_type == &gfs2_fs_type))
atomic_inc(&sb->s_active);
else
sb = NULL;
- path_put(&nd.path);
+ path_put(&path);
return sb;
}
diff --git a/fs/hpfs/super.c b/fs/hpfs/super.c
index fecf402d7b8..fc77965be84 100644
--- a/fs/hpfs/super.c
+++ b/fs/hpfs/super.c
@@ -423,8 +423,7 @@ static int hpfs_remount_fs(struct super_block *s, int *flags, char *data)
if (!(*flags & MS_RDONLY)) mark_dirty(s);
- kfree(s->s_options);
- s->s_options = new_opts;
+ replace_mount_options(s, new_opts);
return 0;
diff --git a/fs/hugetlbfs/inode.c b/fs/hugetlbfs/inode.c
index 153d9681192..c1462d43e72 100644
--- a/fs/hugetlbfs/inode.c
+++ b/fs/hugetlbfs/inode.c
@@ -312,16 +312,6 @@ out:
return retval;
}
-/*
- * Read a page. Again trivial. If it didn't already exist
- * in the page cache, it is zero-filled.
- */
-static int hugetlbfs_readpage(struct file *file, struct page * page)
-{
- unlock_page(page);
- return -EINVAL;
-}
-
static int hugetlbfs_write_begin(struct file *file,
struct address_space *mapping,
loff_t pos, unsigned len, unsigned flags,
@@ -701,7 +691,6 @@ static void hugetlbfs_destroy_inode(struct inode *inode)
}
static const struct address_space_operations hugetlbfs_aops = {
- .readpage = hugetlbfs_readpage,
.write_begin = hugetlbfs_write_begin,
.write_end = hugetlbfs_write_end,
.set_page_dirty = hugetlbfs_set_page_dirty,
diff --git a/fs/inode.c b/fs/inode.c
index 6ad14a1cd8c..0571983755d 100644
--- a/fs/inode.c
+++ b/fs/inode.c
@@ -99,7 +99,7 @@ static DEFINE_MUTEX(iprune_mutex);
*/
struct inodes_stat_t inodes_stat;
-static struct kmem_cache * inode_cachep __read_mostly;
+static struct kmem_cache *inode_cachep __read_mostly;
static void wake_up_inode(struct inode *inode)
{
@@ -124,7 +124,7 @@ struct inode *inode_init_always(struct super_block *sb, struct inode *inode)
static struct inode_operations empty_iops;
static const struct file_operations empty_fops;
- struct address_space * const mapping = &inode->i_data;
+ struct address_space *const mapping = &inode->i_data;
inode->i_sb = sb;
inode->i_blkbits = sb->s_blocksize_bits;
@@ -216,7 +216,7 @@ static struct inode *alloc_inode(struct super_block *sb)
return NULL;
}
-void destroy_inode(struct inode *inode)
+void destroy_inode(struct inode *inode)
{
BUG_ON(inode_has_buffers(inode));
security_inode_free(inode);
@@ -252,12 +252,11 @@ void inode_init_once(struct inode *inode)
mutex_init(&inode->inotify_mutex);
#endif
}
-
EXPORT_SYMBOL(inode_init_once);
static void init_once(void *foo)
{
- struct inode * inode = (struct inode *) foo;
+ struct inode *inode = (struct inode *) foo;
inode_init_once(inode);
}
@@ -265,7 +264,7 @@ static void init_once(void *foo)
/*
* inode_lock must be held
*/
-void __iget(struct inode * inode)
+void __iget(struct inode *inode)
{
if (atomic_read(&inode->i_count)) {
atomic_inc(&inode->i_count);
@@ -289,7 +288,7 @@ void clear_inode(struct inode *inode)
{
might_sleep();
invalidate_inode_buffers(inode);
-
+
BUG_ON(inode->i_data.nrpages);
BUG_ON(!(inode->i_state & I_FREEING));
BUG_ON(inode->i_state & I_CLEAR);
@@ -303,7 +302,6 @@ void clear_inode(struct inode *inode)
cd_forget(inode);
inode->i_state = I_CLEAR;
}
-
EXPORT_SYMBOL(clear_inode);
/*
@@ -351,8 +349,8 @@ static int invalidate_list(struct list_head *head, struct list_head *dispose)
next = head->next;
for (;;) {
- struct list_head * tmp = next;
- struct inode * inode;
+ struct list_head *tmp = next;
+ struct inode *inode;
/*
* We can reschedule here without worrying about the list's
@@ -391,7 +389,7 @@ static int invalidate_list(struct list_head *head, struct list_head *dispose)
* fails because there are busy inodes then a non zero value is returned.
* If the discard is successful all the inodes have been discarded.
*/
-int invalidate_inodes(struct super_block * sb)
+int invalidate_inodes(struct super_block *sb)
{
int busy;
LIST_HEAD(throw_away);
@@ -407,7 +405,6 @@ int invalidate_inodes(struct super_block * sb)
return busy;
}
-
EXPORT_SYMBOL(invalidate_inodes);
static int can_unuse(struct inode *inode)
@@ -504,7 +501,7 @@ static int shrink_icache_memory(int nr, gfp_t gfp_mask)
* Nasty deadlock avoidance. We may hold various FS locks,
* and we don't want to recurse into the FS that called us
* in clear_inode() and friends..
- */
+ */
if (!(gfp_mask & __GFP_FS))
return -1;
prune_icache(nr);
@@ -524,10 +521,13 @@ static void __wait_on_freeing_inode(struct inode *inode);
* by hand after calling find_inode now! This simplifies iunique and won't
* add any additional branch in the common code.
*/
-static struct inode * find_inode(struct super_block * sb, struct hlist_head *head, int (*test)(struct inode *, void *), void *data)
+static struct inode *find_inode(struct super_block *sb,
+ struct hlist_head *head,
+ int (*test)(struct inode *, void *),
+ void *data)
{
struct hlist_node *node;
- struct inode * inode = NULL;
+ struct inode *inode = NULL;
repeat:
hlist_for_each_entry(inode, node, head, i_hash) {
@@ -548,10 +548,11 @@ repeat:
* find_inode_fast is the fast path version of find_inode, see the comment at
* iget_locked for details.
*/
-static struct inode * find_inode_fast(struct super_block * sb, struct hlist_head *head, unsigned long ino)
+static struct inode *find_inode_fast(struct super_block *sb,
+ struct hlist_head *head, unsigned long ino)
{
struct hlist_node *node;
- struct inode * inode = NULL;
+ struct inode *inode = NULL;
repeat:
hlist_for_each_entry(inode, node, head, i_hash) {
@@ -631,10 +632,10 @@ struct inode *new_inode(struct super_block *sb)
* here to attempt to avoid that.
*/
static unsigned int last_ino;
- struct inode * inode;
+ struct inode *inode;
spin_lock_prefetch(&inode_lock);
-
+
inode = alloc_inode(sb);
if (inode) {
spin_lock(&inode_lock);
@@ -645,7 +646,6 @@ struct inode *new_inode(struct super_block *sb)
}
return inode;
}
-
EXPORT_SYMBOL(new_inode);
void unlock_new_inode(struct inode *inode)
@@ -674,7 +674,6 @@ void unlock_new_inode(struct inode *inode)
inode->i_state &= ~(I_LOCK|I_NEW);
wake_up_inode(inode);
}
-
EXPORT_SYMBOL(unlock_new_inode);
/*
@@ -683,13 +682,17 @@ EXPORT_SYMBOL(unlock_new_inode);
* We no longer cache the sb_flags in i_flags - see fs.h
* -- rmk@arm.uk.linux.org
*/
-static struct inode * get_new_inode(struct super_block *sb, struct hlist_head *head, int (*test)(struct inode *, void *), int (*set)(struct inode *, void *), void *data)
+static struct inode *get_new_inode(struct super_block *sb,
+ struct hlist_head *head,
+ int (*test)(struct inode *, void *),
+ int (*set)(struct inode *, void *),
+ void *data)
{
- struct inode * inode;
+ struct inode *inode;
inode = alloc_inode(sb);
if (inode) {
- struct inode * old;
+ struct inode *old;
spin_lock(&inode_lock);
/* We released the lock, so.. */
@@ -731,13 +734,14 @@ set_failed:
* get_new_inode_fast is the fast path version of get_new_inode, see the
* comment at iget_locked for details.
*/
-static struct inode * get_new_inode_fast(struct super_block *sb, struct hlist_head *head, unsigned long ino)
+static struct inode *get_new_inode_fast(struct super_block *sb,
+ struct hlist_head *head, unsigned long ino)
{
- struct inode * inode;
+ struct inode *inode;
inode = alloc_inode(sb);
if (inode) {
- struct inode * old;
+ struct inode *old;
spin_lock(&inode_lock);
/* We released the lock, so.. */
@@ -823,7 +827,6 @@ struct inode *igrab(struct inode *inode)
spin_unlock(&inode_lock);
return inode;
}
-
EXPORT_SYMBOL(igrab);
/**
@@ -924,7 +927,6 @@ struct inode *ilookup5_nowait(struct super_block *sb, unsigned long hashval,
return ifind(sb, head, test, data, 0);
}
-
EXPORT_SYMBOL(ilookup5_nowait);
/**
@@ -953,7 +955,6 @@ struct inode *ilookup5(struct super_block *sb, unsigned long hashval,
return ifind(sb, head, test, data, 1);
}
-
EXPORT_SYMBOL(ilookup5);
/**
@@ -976,7 +977,6 @@ struct inode *ilookup(struct super_block *sb, unsigned long ino)
return ifind_fast(sb, head, ino);
}
-
EXPORT_SYMBOL(ilookup);
/**
@@ -1015,7 +1015,6 @@ struct inode *iget5_locked(struct super_block *sb, unsigned long hashval,
*/
return get_new_inode(sb, head, test, set, data);
}
-
EXPORT_SYMBOL(iget5_locked);
/**
@@ -1047,7 +1046,6 @@ struct inode *iget_locked(struct super_block *sb, unsigned long ino)
*/
return get_new_inode_fast(sb, head, ino);
}
-
EXPORT_SYMBOL(iget_locked);
int insert_inode_locked(struct inode *inode)
@@ -1076,7 +1074,6 @@ int insert_inode_locked(struct inode *inode)
iput(old);
}
}
-
EXPORT_SYMBOL(insert_inode_locked);
int insert_inode_locked4(struct inode *inode, unsigned long hashval,
@@ -1106,7 +1103,6 @@ int insert_inode_locked4(struct inode *inode, unsigned long hashval,
iput(old);
}
}
-
EXPORT_SYMBOL(insert_inode_locked4);
/**
@@ -1124,7 +1120,6 @@ void __insert_inode_hash(struct inode *inode, unsigned long hashval)
hlist_add_head(&inode->i_hash, head);
spin_unlock(&inode_lock);
}
-
EXPORT_SYMBOL(__insert_inode_hash);
/**
@@ -1139,7 +1134,6 @@ void remove_inode_hash(struct inode *inode)
hlist_del_init(&inode->i_hash);
spin_unlock(&inode_lock);
}
-
EXPORT_SYMBOL(remove_inode_hash);
/*
@@ -1187,7 +1181,6 @@ void generic_delete_inode(struct inode *inode)
BUG_ON(inode->i_state != I_CLEAR);
destroy_inode(inode);
}
-
EXPORT_SYMBOL(generic_delete_inode);
static void generic_forget_inode(struct inode *inode)
@@ -1237,12 +1230,11 @@ void generic_drop_inode(struct inode *inode)
else
generic_forget_inode(inode);
}
-
EXPORT_SYMBOL_GPL(generic_drop_inode);
/*
* Called when we're dropping the last reference
- * to an inode.
+ * to an inode.
*
* Call the FS "drop()" function, defaulting to
* the legacy UNIX filesystem behaviour..
@@ -1262,7 +1254,7 @@ static inline void iput_final(struct inode *inode)
}
/**
- * iput - put an inode
+ * iput - put an inode
* @inode: inode to put
*
* Puts an inode, dropping its usage count. If the inode use count hits
@@ -1279,7 +1271,6 @@ void iput(struct inode *inode)
iput_final(inode);
}
}
-
EXPORT_SYMBOL(iput);
/**
@@ -1290,10 +1281,10 @@ EXPORT_SYMBOL(iput);
* Returns the block number on the device holding the inode that
* is the disk block number for the block of the file requested.
* That is, asked for block 4 of inode 1 the function will return the
- * disk block relative to the disk start that holds that block of the
+ * disk block relative to the disk start that holds that block of the
* file.
*/
-sector_t bmap(struct inode * inode, sector_t block)
+sector_t bmap(struct inode *inode, sector_t block)
{
sector_t res = 0;
if (inode->i_mapping->a_ops->bmap)
@@ -1425,7 +1416,6 @@ void file_update_time(struct file *file)
mark_inode_dirty_sync(inode);
mnt_drop_write(file->f_path.mnt);
}
-
EXPORT_SYMBOL(file_update_time);
int inode_needs_sync(struct inode *inode)
@@ -1436,7 +1426,6 @@ int inode_needs_sync(struct inode *inode)
return 1;
return 0;
}
-
EXPORT_SYMBOL(inode_needs_sync);
int inode_wait(void *word)
diff --git a/fs/ioctl.c b/fs/ioctl.c
index ac2d47e4392..82d9c42b8ba 100644
--- a/fs/ioctl.c
+++ b/fs/ioctl.c
@@ -258,7 +258,7 @@ int __generic_block_fiemap(struct inode *inode,
long long length = 0, map_len = 0;
u64 logical = 0, phys = 0, size = 0;
u32 flags = FIEMAP_EXTENT_MERGED;
- int ret = 0;
+ int ret = 0, past_eof = 0, whole_file = 0;
if ((ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC)))
return ret;
@@ -266,6 +266,9 @@ int __generic_block_fiemap(struct inode *inode,
start_blk = logical_to_blk(inode, start);
length = (long long)min_t(u64, len, i_size_read(inode));
+ if (length < len)
+ whole_file = 1;
+
map_len = length;
do {
@@ -282,11 +285,26 @@ int __generic_block_fiemap(struct inode *inode,
/* HOLE */
if (!buffer_mapped(&tmp)) {
+ length -= blk_to_logical(inode, 1);
+ start_blk++;
+
+ /*
+ * we want to handle the case where there is an
+ * allocated block at the front of the file, and then
+ * nothing but holes up to the end of the file properly,
+ * to make sure that extent at the front gets properly
+ * marked with FIEMAP_EXTENT_LAST
+ */
+ if (!past_eof &&
+ blk_to_logical(inode, start_blk) >=
+ blk_to_logical(inode, 0)+i_size_read(inode))
+ past_eof = 1;
+
/*
* first hole after going past the EOF, this is our
* last extent
*/
- if (length <= 0) {
+ if (past_eof && size) {
flags = FIEMAP_EXTENT_MERGED|FIEMAP_EXTENT_LAST;
ret = fiemap_fill_next_extent(fieinfo, logical,
phys, size,
@@ -294,15 +312,37 @@ int __generic_block_fiemap(struct inode *inode,
break;
}
- length -= blk_to_logical(inode, 1);
-
/* if we have holes up to/past EOF then we're done */
- if (length <= 0)
+ if (length <= 0 || past_eof)
break;
-
- start_blk++;
} else {
- if (length <= 0 && size) {
+ /*
+ * we have gone over the length of what we wanted to
+ * map, and it wasn't the entire file, so add the extent
+ * we got last time and exit.
+ *
+ * This is for the case where say we want to map all the
+ * way up to the second to the last block in a file, but
+ * the last block is a hole, making the second to last
+ * block FIEMAP_EXTENT_LAST. In this case we want to
+ * see if there is a hole after the second to last block
+ * so we can mark it properly. If we found data after
+ * we exceeded the length we were requesting, then we
+ * are good to go, just add the extent to the fieinfo
+ * and break
+ */
+ if (length <= 0 && !whole_file) {
+ ret = fiemap_fill_next_extent(fieinfo, logical,
+ phys, size,
+ flags);
+ break;
+ }
+
+ /*
+ * if size != 0 then we know we already have an extent
+ * to add, so add it.
+ */
+ if (size) {
ret = fiemap_fill_next_extent(fieinfo, logical,
phys, size,
flags);
@@ -319,19 +359,14 @@ int __generic_block_fiemap(struct inode *inode,
start_blk += logical_to_blk(inode, size);
/*
- * if we are past the EOF we need to loop again to see
- * if there is a hole so we can mark this extent as the
- * last one, and if not keep mapping things until we
- * find a hole, or we run out of slots in the extent
- * array
+ * If we are past the EOF, then we need to make sure as
+ * soon as we find a hole that the last extent we found
+ * is marked with FIEMAP_EXTENT_LAST
*/
- if (length <= 0)
- continue;
-
- ret = fiemap_fill_next_extent(fieinfo, logical, phys,
- size, flags);
- if (ret)
- break;
+ if (!past_eof &&
+ logical+size >=
+ blk_to_logical(inode, 0)+i_size_read(inode))
+ past_eof = 1;
}
cond_resched();
} while (1);
diff --git a/fs/libfs.c b/fs/libfs.c
index cd223190c4e..80046ddf506 100644
--- a/fs/libfs.c
+++ b/fs/libfs.c
@@ -246,8 +246,7 @@ int get_sb_pseudo(struct file_system_type *fs_type, char *name,
return 0;
Enomem:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
return -ENOMEM;
}
diff --git a/fs/lockd/svc.c b/fs/lockd/svc.c
index abf83881f68..1a54ae14a19 100644
--- a/fs/lockd/svc.c
+++ b/fs/lockd/svc.c
@@ -104,6 +104,16 @@ static void set_grace_period(void)
schedule_delayed_work(&grace_period_end, grace_period);
}
+static void restart_grace(void)
+{
+ if (nlmsvc_ops) {
+ cancel_delayed_work_sync(&grace_period_end);
+ locks_end_grace(&lockd_manager);
+ nlmsvc_invalidate_all();
+ set_grace_period();
+ }
+}
+
/*
* This is the lockd kernel thread
*/
@@ -149,10 +159,7 @@ lockd(void *vrqstp)
if (signalled()) {
flush_signals(current);
- if (nlmsvc_ops) {
- nlmsvc_invalidate_all();
- set_grace_period();
- }
+ restart_grace();
continue;
}
diff --git a/fs/namei.c b/fs/namei.c
index 78f253cd2d4..967c3db9272 100644
--- a/fs/namei.c
+++ b/fs/namei.c
@@ -1130,8 +1130,8 @@ int vfs_path_lookup(struct dentry *dentry, struct vfsmount *mnt,
* @nd: pointer to nameidata
* @open_flags: open intent flags
*/
-int path_lookup_open(int dfd, const char *name, unsigned int lookup_flags,
- struct nameidata *nd, int open_flags)
+static int path_lookup_open(int dfd, const char *name,
+ unsigned int lookup_flags, struct nameidata *nd, int open_flags)
{
struct file *filp = get_empty_filp();
int err;
@@ -1637,18 +1637,19 @@ static int open_will_write_to_fs(int flag, struct inode *inode)
* open_to_namei_flags() for more details.
*/
struct file *do_filp_open(int dfd, const char *pathname,
- int open_flag, int mode)
+ int open_flag, int mode, int acc_mode)
{
struct file *filp;
struct nameidata nd;
- int acc_mode, error;
+ int error;
struct path path;
struct dentry *dir;
int count = 0;
int will_write;
int flag = open_to_namei_flags(open_flag);
- acc_mode = MAY_OPEN | ACC_MODE(flag);
+ if (!acc_mode)
+ acc_mode = MAY_OPEN | ACC_MODE(flag);
/* O_TRUNC implies we need access checks for write permissions */
if (flag & O_TRUNC)
@@ -1869,7 +1870,7 @@ do_link:
*/
struct file *filp_open(const char *filename, int flags, int mode)
{
- return do_filp_open(AT_FDCWD, filename, flags, mode);
+ return do_filp_open(AT_FDCWD, filename, flags, mode, 0);
}
EXPORT_SYMBOL(filp_open);
diff --git a/fs/namespace.c b/fs/namespace.c
index 41196209a90..134d494158d 100644
--- a/fs/namespace.c
+++ b/fs/namespace.c
@@ -695,12 +695,16 @@ static inline void mangle(struct seq_file *m, const char *s)
*/
int generic_show_options(struct seq_file *m, struct vfsmount *mnt)
{
- const char *options = mnt->mnt_sb->s_options;
+ const char *options;
+
+ rcu_read_lock();
+ options = rcu_dereference(mnt->mnt_sb->s_options);
if (options != NULL && options[0]) {
seq_putc(m, ',');
mangle(m, options);
}
+ rcu_read_unlock();
return 0;
}
@@ -721,11 +725,22 @@ EXPORT_SYMBOL(generic_show_options);
*/
void save_mount_options(struct super_block *sb, char *options)
{
- kfree(sb->s_options);
- sb->s_options = kstrdup(options, GFP_KERNEL);
+ BUG_ON(sb->s_options);
+ rcu_assign_pointer(sb->s_options, kstrdup(options, GFP_KERNEL));
}
EXPORT_SYMBOL(save_mount_options);
+void replace_mount_options(struct super_block *sb, char *options)
+{
+ char *old = sb->s_options;
+ rcu_assign_pointer(sb->s_options, options);
+ if (old) {
+ synchronize_rcu();
+ kfree(old);
+ }
+}
+EXPORT_SYMBOL(replace_mount_options);
+
#ifdef CONFIG_PROC_FS
/* iterator */
static void *m_start(struct seq_file *m, loff_t *pos)
@@ -1073,9 +1088,7 @@ static int do_umount(struct vfsmount *mnt, int flags)
*/
if (flags & MNT_FORCE && sb->s_op->umount_begin) {
- lock_kernel();
sb->s_op->umount_begin(sb);
- unlock_kernel();
}
/*
diff --git a/fs/nfs/dir.c b/fs/nfs/dir.c
index 370b190a09d..89f98e9a024 100644
--- a/fs/nfs/dir.c
+++ b/fs/nfs/dir.c
@@ -1943,7 +1943,8 @@ int nfs_permission(struct inode *inode, int mask)
case S_IFREG:
/* NFSv4 has atomic_open... */
if (nfs_server_capable(inode, NFS_CAP_ATOMIC_OPEN)
- && (mask & MAY_OPEN))
+ && (mask & MAY_OPEN)
+ && !(mask & MAY_EXEC))
goto out;
break;
case S_IFDIR:
diff --git a/fs/nfs/file.c b/fs/nfs/file.c
index 5a97bcfe03e..ec7e27d00bc 100644
--- a/fs/nfs/file.c
+++ b/fs/nfs/file.c
@@ -517,10 +517,10 @@ static int nfs_vm_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf)
ret = nfs_updatepage(filp, page, 0, pagelen);
out_unlock:
+ if (!ret)
+ return VM_FAULT_LOCKED;
unlock_page(page);
- if (ret)
- ret = VM_FAULT_SIGBUS;
- return ret;
+ return VM_FAULT_SIGBUS;
}
static struct vm_operations_struct nfs_file_vm_ops = {
diff --git a/fs/nfs/super.c b/fs/nfs/super.c
index 6717200923f..d2d67781c57 100644
--- a/fs/nfs/super.c
+++ b/fs/nfs/super.c
@@ -683,9 +683,12 @@ static int nfs_show_stats(struct seq_file *m, struct vfsmount *mnt)
*/
static void nfs_umount_begin(struct super_block *sb)
{
- struct nfs_server *server = NFS_SB(sb);
+ struct nfs_server *server;
struct rpc_clnt *rpc;
+ lock_kernel();
+
+ server = NFS_SB(sb);
/* -EIO all pending I/O */
rpc = server->client_acl;
if (!IS_ERR(rpc))
@@ -693,6 +696,8 @@ static void nfs_umount_begin(struct super_block *sb)
rpc = server->client;
if (!IS_ERR(rpc))
rpc_killall_tasks(rpc);
+
+ unlock_kernel();
}
/*
@@ -2106,8 +2111,7 @@ out_err_nosb:
error_splat_root:
dput(mntroot);
error_splat_super:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
goto out;
}
@@ -2203,8 +2207,7 @@ out_err_noserver:
return error;
error_splat_super:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
dprintk("<-- nfs_xdev_get_sb() = %d [splat]\n", error);
return error;
}
@@ -2464,8 +2467,7 @@ out_free:
error_splat_root:
dput(mntroot);
error_splat_super:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
goto out;
}
@@ -2559,8 +2561,7 @@ out_err_noserver:
return error;
error_splat_super:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
dprintk("<-- nfs4_xdev_get_sb() = %d [splat]\n", error);
return error;
}
@@ -2644,8 +2645,7 @@ out_err_noserver:
return error;
error_splat_super:
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
dprintk("<-- nfs4_referral_get_sb() = %d [splat]\n", error);
return error;
}
diff --git a/fs/nfsd/nfs4recover.c b/fs/nfsd/nfs4recover.c
index 5275097a756..b5348405046 100644
--- a/fs/nfsd/nfs4recover.c
+++ b/fs/nfsd/nfs4recover.c
@@ -229,7 +229,7 @@ nfsd4_list_rec_dir(struct dentry *dir, recdir_func *f)
goto out;
status = vfs_readdir(filp, nfsd4_build_namelist, &names);
fput(filp);
- mutex_lock(&dir->d_inode->i_mutex);
+ mutex_lock_nested(&dir->d_inode->i_mutex, I_MUTEX_PARENT);
while (!list_empty(&names)) {
entry = list_entry(names.next, struct name_list, list);
@@ -264,7 +264,7 @@ nfsd4_unlink_clid_dir(char *name, int namlen)
dprintk("NFSD: nfsd4_unlink_clid_dir. name %.*s\n", namlen, name);
- mutex_lock(&rec_dir.dentry->d_inode->i_mutex);
+ mutex_lock_nested(&rec_dir.dentry->d_inode->i_mutex, I_MUTEX_PARENT);
dentry = lookup_one_len(name, rec_dir.dentry, namlen);
if (IS_ERR(dentry)) {
status = PTR_ERR(dentry);
diff --git a/fs/nfsd/nfs4state.c b/fs/nfsd/nfs4state.c
index c65a27b76a9..3b711f5147a 100644
--- a/fs/nfsd/nfs4state.c
+++ b/fs/nfsd/nfs4state.c
@@ -580,7 +580,6 @@ free_session(struct kref *kref)
struct nfsd4_cache_entry *e = &ses->se_slots[i].sl_cache_entry;
nfsd4_release_respages(e->ce_respages, e->ce_resused);
}
- kfree(ses->se_slots);
kfree(ses);
}
diff --git a/fs/nfsd/nfs4xdr.c b/fs/nfsd/nfs4xdr.c
index b820c311931..b73549d293b 100644
--- a/fs/nfsd/nfs4xdr.c
+++ b/fs/nfsd/nfs4xdr.c
@@ -2214,6 +2214,15 @@ nfsd4_encode_dirent_fattr(struct nfsd4_readdir *cd,
dentry = lookup_one_len(name, cd->rd_fhp->fh_dentry, namlen);
if (IS_ERR(dentry))
return nfserrno(PTR_ERR(dentry));
+ if (!dentry->d_inode) {
+ /*
+ * nfsd_buffered_readdir drops the i_mutex between
+ * readdir and calling this callback, leaving a window
+ * where this directory entry could have gone away.
+ */
+ dput(dentry);
+ return nfserr_noent;
+ }
exp_get(exp);
/*
@@ -2276,6 +2285,7 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen,
struct nfsd4_readdir *cd = container_of(ccd, struct nfsd4_readdir, common);
int buflen;
__be32 *p = cd->buffer;
+ __be32 *cookiep;
__be32 nfserr = nfserr_toosmall;
/* In nfsv4, "." and ".." never make it onto the wire.. */
@@ -2292,7 +2302,7 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen,
goto fail;
*p++ = xdr_one; /* mark entry present */
- cd->offset = p; /* remember pointer */
+ cookiep = p;
p = xdr_encode_hyper(p, NFS_OFFSET_MAX); /* offset of next entry */
p = xdr_encode_array(p, name, namlen); /* name length & name */
@@ -2306,6 +2316,8 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen,
goto fail;
case nfserr_dropit:
goto fail;
+ case nfserr_noent:
+ goto skip_entry;
default:
/*
* If the client requested the RDATTR_ERROR attribute,
@@ -2324,6 +2336,8 @@ nfsd4_encode_dirent(void *ccdv, const char *name, int namlen,
}
cd->buflen -= (p - cd->buffer);
cd->buffer = p;
+ cd->offset = cookiep;
+skip_entry:
cd->common.err = nfs_ok;
return 0;
fail:
diff --git a/fs/nilfs2/ioctl.c b/fs/nilfs2/ioctl.c
index 108d281ebca..d6759b92006 100644
--- a/fs/nilfs2/ioctl.c
+++ b/fs/nilfs2/ioctl.c
@@ -25,6 +25,7 @@
#include <linux/smp_lock.h> /* lock_kernel(), unlock_kernel() */
#include <linux/capability.h> /* capable() */
#include <linux/uaccess.h> /* copy_from_user(), copy_to_user() */
+#include <linux/vmalloc.h>
#include <linux/nilfs2_fs.h>
#include "nilfs.h"
#include "segment.h"
@@ -147,29 +148,12 @@ static ssize_t
nilfs_ioctl_do_get_cpinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
void *buf, size_t size, size_t nmembs)
{
- return nilfs_cpfile_get_cpinfo(nilfs->ns_cpfile, posp, flags, buf,
- nmembs);
-}
-
-static int nilfs_ioctl_get_cpinfo(struct inode *inode, struct file *filp,
- unsigned int cmd, void __user *argp)
-{
- struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
- struct nilfs_argv argv;
int ret;
- if (copy_from_user(&argv, argp, sizeof(argv)))
- return -EFAULT;
-
down_read(&nilfs->ns_segctor_sem);
- ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
- nilfs_ioctl_do_get_cpinfo);
+ ret = nilfs_cpfile_get_cpinfo(nilfs->ns_cpfile, posp, flags, buf,
+ nmembs);
up_read(&nilfs->ns_segctor_sem);
- if (ret < 0)
- return ret;
-
- if (copy_to_user(argp, &argv, sizeof(argv)))
- ret = -EFAULT;
return ret;
}
@@ -195,28 +179,11 @@ static ssize_t
nilfs_ioctl_do_get_suinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
void *buf, size_t size, size_t nmembs)
{
- return nilfs_sufile_get_suinfo(nilfs->ns_sufile, *posp, buf, nmembs);
-}
-
-static int nilfs_ioctl_get_suinfo(struct inode *inode, struct file *filp,
- unsigned int cmd, void __user *argp)
-{
- struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
- struct nilfs_argv argv;
int ret;
- if (copy_from_user(&argv, argp, sizeof(argv)))
- return -EFAULT;
-
down_read(&nilfs->ns_segctor_sem);
- ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
- nilfs_ioctl_do_get_suinfo);
+ ret = nilfs_sufile_get_suinfo(nilfs->ns_sufile, *posp, buf, nmembs);
up_read(&nilfs->ns_segctor_sem);
- if (ret < 0)
- return ret;
-
- if (copy_to_user(argp, &argv, sizeof(argv)))
- ret = -EFAULT;
return ret;
}
@@ -242,28 +209,11 @@ static ssize_t
nilfs_ioctl_do_get_vinfo(struct the_nilfs *nilfs, __u64 *posp, int flags,
void *buf, size_t size, size_t nmembs)
{
- return nilfs_dat_get_vinfo(nilfs_dat_inode(nilfs), buf, nmembs);
-}
-
-static int nilfs_ioctl_get_vinfo(struct inode *inode, struct file *filp,
- unsigned int cmd, void __user *argp)
-{
- struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
- struct nilfs_argv argv;
int ret;
- if (copy_from_user(&argv, argp, sizeof(argv)))
- return -EFAULT;
-
down_read(&nilfs->ns_segctor_sem);
- ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
- nilfs_ioctl_do_get_vinfo);
+ ret = nilfs_dat_get_vinfo(nilfs_dat_inode(nilfs), buf, nmembs);
up_read(&nilfs->ns_segctor_sem);
- if (ret < 0)
- return ret;
-
- if (copy_to_user(argp, &argv, sizeof(argv)))
- ret = -EFAULT;
return ret;
}
@@ -276,17 +226,21 @@ nilfs_ioctl_do_get_bdescs(struct the_nilfs *nilfs, __u64 *posp, int flags,
struct nilfs_bdesc *bdescs = buf;
int ret, i;
+ down_read(&nilfs->ns_segctor_sem);
for (i = 0; i < nmembs; i++) {
ret = nilfs_bmap_lookup_at_level(bmap,
bdescs[i].bd_offset,
bdescs[i].bd_level + 1,
&bdescs[i].bd_blocknr);
if (ret < 0) {
- if (ret != -ENOENT)
+ if (ret != -ENOENT) {
+ up_read(&nilfs->ns_segctor_sem);
return ret;
+ }
bdescs[i].bd_blocknr = 0;
}
}
+ up_read(&nilfs->ns_segctor_sem);
return nmembs;
}
@@ -300,10 +254,11 @@ static int nilfs_ioctl_get_bdescs(struct inode *inode, struct file *filp,
if (copy_from_user(&argv, argp, sizeof(argv)))
return -EFAULT;
- down_read(&nilfs->ns_segctor_sem);
+ if (argv.v_size != sizeof(struct nilfs_bdesc))
+ return -EINVAL;
+
ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd),
nilfs_ioctl_do_get_bdescs);
- up_read(&nilfs->ns_segctor_sem);
if (ret < 0)
return ret;
@@ -346,10 +301,10 @@ static int nilfs_ioctl_move_inode_block(struct inode *inode,
return 0;
}
-static ssize_t
-nilfs_ioctl_do_move_blocks(struct the_nilfs *nilfs, __u64 *posp, int flags,
- void *buf, size_t size, size_t nmembs)
+static int nilfs_ioctl_move_blocks(struct the_nilfs *nilfs,
+ struct nilfs_argv *argv, void *buf)
{
+ size_t nmembs = argv->v_nmembs;
struct inode *inode;
struct nilfs_vdesc *vdesc;
struct buffer_head *bh, *n;
@@ -410,19 +365,10 @@ nilfs_ioctl_do_move_blocks(struct the_nilfs *nilfs, __u64 *posp, int flags,
return ret;
}
-static inline int nilfs_ioctl_move_blocks(struct the_nilfs *nilfs,
- struct nilfs_argv *argv,
- int dir)
-{
- return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
- nilfs_ioctl_do_move_blocks);
-}
-
-static ssize_t
-nilfs_ioctl_do_delete_checkpoints(struct the_nilfs *nilfs, __u64 *posp,
- int flags, void *buf, size_t size,
- size_t nmembs)
+static int nilfs_ioctl_delete_checkpoints(struct the_nilfs *nilfs,
+ struct nilfs_argv *argv, void *buf)
{
+ size_t nmembs = argv->v_nmembs;
struct inode *cpfile = nilfs->ns_cpfile;
struct nilfs_period *periods = buf;
int ret, i;
@@ -436,36 +382,21 @@ nilfs_ioctl_do_delete_checkpoints(struct the_nilfs *nilfs, __u64 *posp,
return nmembs;
}
-static inline int nilfs_ioctl_delete_checkpoints(struct the_nilfs *nilfs,
- struct nilfs_argv *argv,
- int dir)
+static int nilfs_ioctl_free_vblocknrs(struct the_nilfs *nilfs,
+ struct nilfs_argv *argv, void *buf)
{
- return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
- nilfs_ioctl_do_delete_checkpoints);
-}
+ size_t nmembs = argv->v_nmembs;
+ int ret;
-static ssize_t
-nilfs_ioctl_do_free_vblocknrs(struct the_nilfs *nilfs, __u64 *posp, int flags,
- void *buf, size_t size, size_t nmembs)
-{
- int ret = nilfs_dat_freev(nilfs_dat_inode(nilfs), buf, nmembs);
+ ret = nilfs_dat_freev(nilfs_dat_inode(nilfs), buf, nmembs);
return (ret < 0) ? ret : nmembs;
}
-static inline int nilfs_ioctl_free_vblocknrs(struct the_nilfs *nilfs,
- struct nilfs_argv *argv,
- int dir)
-{
- return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
- nilfs_ioctl_do_free_vblocknrs);
-}
-
-static ssize_t
-nilfs_ioctl_do_mark_blocks_dirty(struct the_nilfs *nilfs, __u64 *posp,
- int flags, void *buf, size_t size,
- size_t nmembs)
+static int nilfs_ioctl_mark_blocks_dirty(struct the_nilfs *nilfs,
+ struct nilfs_argv *argv, void *buf)
{
+ size_t nmembs = argv->v_nmembs;
struct inode *dat = nilfs_dat_inode(nilfs);
struct nilfs_bmap *bmap = NILFS_I(dat)->i_bmap;
struct nilfs_bdesc *bdescs = buf;
@@ -504,55 +435,37 @@ nilfs_ioctl_do_mark_blocks_dirty(struct the_nilfs *nilfs, __u64 *posp,
return nmembs;
}
-static inline int nilfs_ioctl_mark_blocks_dirty(struct the_nilfs *nilfs,
- struct nilfs_argv *argv,
- int dir)
+static int nilfs_ioctl_free_segments(struct the_nilfs *nilfs,
+ struct nilfs_argv *argv, void *buf)
{
- return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
- nilfs_ioctl_do_mark_blocks_dirty);
-}
-
-static ssize_t
-nilfs_ioctl_do_free_segments(struct the_nilfs *nilfs, __u64 *posp, int flags,
- void *buf, size_t size, size_t nmembs)
-{
- struct nilfs_sb_info *sbi = nilfs_get_writer(nilfs);
+ size_t nmembs = argv->v_nmembs;
+ struct nilfs_sb_info *sbi = nilfs->ns_writer;
int ret;
- if (unlikely(!sbi))
+ if (unlikely(!sbi)) {
+ /* never happens because called for a writable mount */
+ WARN_ON(1);
return -EROFS;
+ }
ret = nilfs_segctor_add_segments_to_be_freed(
NILFS_SC(sbi), buf, nmembs);
- nilfs_put_writer(nilfs);
return (ret < 0) ? ret : nmembs;
}
-static inline int nilfs_ioctl_free_segments(struct the_nilfs *nilfs,
- struct nilfs_argv *argv,
- int dir)
-{
- return nilfs_ioctl_wrap_copy(nilfs, argv, dir,
- nilfs_ioctl_do_free_segments);
-}
-
int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
- void __user *argp)
+ struct nilfs_argv *argv, void **kbufs)
{
- struct nilfs_argv argv[5];
const char *msg;
- int dir, ret;
-
- if (copy_from_user(argv, argp, sizeof(argv)))
- return -EFAULT;
+ int ret;
- dir = _IOC_WRITE;
- ret = nilfs_ioctl_move_blocks(nilfs, &argv[0], dir);
+ ret = nilfs_ioctl_move_blocks(nilfs, &argv[0], kbufs[0]);
if (ret < 0) {
msg = "cannot read source blocks";
goto failed;
}
- ret = nilfs_ioctl_delete_checkpoints(nilfs, &argv[1], dir);
+
+ ret = nilfs_ioctl_delete_checkpoints(nilfs, &argv[1], kbufs[1]);
if (ret < 0) {
/*
* can safely abort because checkpoints can be removed
@@ -561,7 +474,7 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
msg = "cannot delete checkpoints";
goto failed;
}
- ret = nilfs_ioctl_free_vblocknrs(nilfs, &argv[2], dir);
+ ret = nilfs_ioctl_free_vblocknrs(nilfs, &argv[2], kbufs[2]);
if (ret < 0) {
/*
* can safely abort because DAT file is updated atomically
@@ -570,7 +483,7 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
msg = "cannot delete virtual blocks from DAT file";
goto failed;
}
- ret = nilfs_ioctl_mark_blocks_dirty(nilfs, &argv[3], dir);
+ ret = nilfs_ioctl_mark_blocks_dirty(nilfs, &argv[3], kbufs[3]);
if (ret < 0) {
/*
* can safely abort because the operation is nondestructive.
@@ -578,7 +491,7 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
msg = "cannot mark copying blocks dirty";
goto failed;
}
- ret = nilfs_ioctl_free_segments(nilfs, &argv[4], dir);
+ ret = nilfs_ioctl_free_segments(nilfs, &argv[4], kbufs[4]);
if (ret < 0) {
/*
* can safely abort because this operation is atomic.
@@ -598,9 +511,75 @@ int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *nilfs,
static int nilfs_ioctl_clean_segments(struct inode *inode, struct file *filp,
unsigned int cmd, void __user *argp)
{
+ struct nilfs_argv argv[5];
+ const static size_t argsz[5] = {
+ sizeof(struct nilfs_vdesc),
+ sizeof(struct nilfs_period),
+ sizeof(__u64),
+ sizeof(struct nilfs_bdesc),
+ sizeof(__u64),
+ };
+ void __user *base;
+ void *kbufs[5];
+ struct the_nilfs *nilfs;
+ size_t len, nsegs;
+ int n, ret;
+
if (!capable(CAP_SYS_ADMIN))
return -EPERM;
- return nilfs_clean_segments(inode->i_sb, argp);
+
+ if (copy_from_user(argv, argp, sizeof(argv)))
+ return -EFAULT;
+
+ nsegs = argv[4].v_nmembs;
+ if (argv[4].v_size != argsz[4])
+ return -EINVAL;
+ /*
+ * argv[4] points to segment numbers this ioctl cleans. We
+ * use kmalloc() for its buffer because memory used for the
+ * segment numbers is enough small.
+ */
+ kbufs[4] = memdup_user((void __user *)(unsigned long)argv[4].v_base,
+ nsegs * sizeof(__u64));
+ if (IS_ERR(kbufs[4]))
+ return PTR_ERR(kbufs[4]);
+
+ nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
+
+ for (n = 0; n < 4; n++) {
+ ret = -EINVAL;
+ if (argv[n].v_size != argsz[n])
+ goto out_free;
+
+ if (argv[n].v_nmembs > nsegs * nilfs->ns_blocks_per_segment)
+ goto out_free;
+
+ len = argv[n].v_size * argv[n].v_nmembs;
+ base = (void __user *)(unsigned long)argv[n].v_base;
+ if (len == 0) {
+ kbufs[n] = NULL;
+ continue;
+ }
+
+ kbufs[n] = vmalloc(len);
+ if (!kbufs[n]) {
+ ret = -ENOMEM;
+ goto out_free;
+ }
+ if (copy_from_user(kbufs[n], base, len)) {
+ ret = -EFAULT;
+ vfree(kbufs[n]);
+ goto out_free;
+ }
+ }
+
+ ret = nilfs_clean_segments(inode->i_sb, argv, kbufs);
+
+ out_free:
+ while (--n >= 0)
+ vfree(kbufs[n]);
+ kfree(kbufs[4]);
+ return ret;
}
static int nilfs_ioctl_sync(struct inode *inode, struct file *filp,
@@ -621,6 +600,33 @@ static int nilfs_ioctl_sync(struct inode *inode, struct file *filp,
return 0;
}
+static int nilfs_ioctl_get_info(struct inode *inode, struct file *filp,
+ unsigned int cmd, void __user *argp,
+ size_t membsz,
+ ssize_t (*dofunc)(struct the_nilfs *,
+ __u64 *, int,
+ void *, size_t, size_t))
+
+{
+ struct the_nilfs *nilfs = NILFS_SB(inode->i_sb)->s_nilfs;
+ struct nilfs_argv argv;
+ int ret;
+
+ if (copy_from_user(&argv, argp, sizeof(argv)))
+ return -EFAULT;
+
+ if (argv.v_size != membsz)
+ return -EINVAL;
+
+ ret = nilfs_ioctl_wrap_copy(nilfs, &argv, _IOC_DIR(cmd), dofunc);
+ if (ret < 0)
+ return ret;
+
+ if (copy_to_user(argp, &argv, sizeof(argv)))
+ ret = -EFAULT;
+ return ret;
+}
+
long nilfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
{
struct inode *inode = filp->f_dentry->d_inode;
@@ -632,16 +638,21 @@ long nilfs_ioctl(struct file *filp, unsigned int cmd, unsigned long arg)
case NILFS_IOCTL_DELETE_CHECKPOINT:
return nilfs_ioctl_delete_checkpoint(inode, filp, cmd, argp);
case NILFS_IOCTL_GET_CPINFO:
- return nilfs_ioctl_get_cpinfo(inode, filp, cmd, argp);
+ return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+ sizeof(struct nilfs_cpinfo),
+ nilfs_ioctl_do_get_cpinfo);
case NILFS_IOCTL_GET_CPSTAT:
return nilfs_ioctl_get_cpstat(inode, filp, cmd, argp);
case NILFS_IOCTL_GET_SUINFO:
- return nilfs_ioctl_get_suinfo(inode, filp, cmd, argp);
+ return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+ sizeof(struct nilfs_suinfo),
+ nilfs_ioctl_do_get_suinfo);
case NILFS_IOCTL_GET_SUSTAT:
return nilfs_ioctl_get_sustat(inode, filp, cmd, argp);
case NILFS_IOCTL_GET_VINFO:
- /* XXX: rename to ??? */
- return nilfs_ioctl_get_vinfo(inode, filp, cmd, argp);
+ return nilfs_ioctl_get_info(inode, filp, cmd, argp,
+ sizeof(struct nilfs_vinfo),
+ nilfs_ioctl_do_get_vinfo);
case NILFS_IOCTL_GET_BDESCS:
return nilfs_ioctl_get_bdescs(inode, filp, cmd, argp);
case NILFS_IOCTL_CLEAN_SEGMENTS:
diff --git a/fs/nilfs2/mdt.c b/fs/nilfs2/mdt.c
index 47dd815433f..bb78745a0e3 100644
--- a/fs/nilfs2/mdt.c
+++ b/fs/nilfs2/mdt.c
@@ -77,19 +77,22 @@ static int nilfs_mdt_create_block(struct inode *inode, unsigned long block,
void *))
{
struct the_nilfs *nilfs = NILFS_MDT(inode)->mi_nilfs;
- struct nilfs_sb_info *writer = NULL;
struct super_block *sb = inode->i_sb;
struct nilfs_transaction_info ti;
struct buffer_head *bh;
int err;
if (!sb) {
- writer = nilfs_get_writer(nilfs);
- if (!writer) {
+ /*
+ * Make sure this function is not called from any
+ * read-only context.
+ */
+ if (!nilfs->ns_writer) {
+ WARN_ON(1);
err = -EROFS;
goto out;
}
- sb = writer->s_super;
+ sb = nilfs->ns_writer->s_super;
}
nilfs_transaction_begin(sb, &ti, 0);
@@ -127,8 +130,6 @@ static int nilfs_mdt_create_block(struct inode *inode, unsigned long block,
err = nilfs_transaction_commit(sb);
else
nilfs_transaction_abort(sb);
- if (writer)
- nilfs_put_writer(nilfs);
out:
return err;
}
@@ -299,7 +300,7 @@ int nilfs_mdt_delete_block(struct inode *inode, unsigned long block)
int err;
err = nilfs_bmap_delete(ii->i_bmap, block);
- if (likely(!err)) {
+ if (!err || err == -ENOENT) {
nilfs_mdt_mark_dirty(inode);
nilfs_mdt_forget_block(inode, block);
}
diff --git a/fs/nilfs2/nilfs.h b/fs/nilfs2/nilfs.h
index 3d0c18a16db..da6fc0bba2e 100644
--- a/fs/nilfs2/nilfs.h
+++ b/fs/nilfs2/nilfs.h
@@ -236,7 +236,8 @@ extern int nilfs_sync_file(struct file *, struct dentry *, int);
/* ioctl.c */
long nilfs_ioctl(struct file *, unsigned int, unsigned long);
-int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *, void __user *);
+int nilfs_ioctl_prepare_clean_segments(struct the_nilfs *, struct nilfs_argv *,
+ void **);
/* inode.c */
extern struct inode *nilfs_new_inode(struct inode *, int);
diff --git a/fs/nilfs2/page.c b/fs/nilfs2/page.c
index 1bfbba9c0e9..a2692bbc7b5 100644
--- a/fs/nilfs2/page.c
+++ b/fs/nilfs2/page.c
@@ -128,7 +128,8 @@ void nilfs_forget_buffer(struct buffer_head *bh)
lock_buffer(bh);
clear_buffer_nilfs_volatile(bh);
- if (test_clear_buffer_dirty(bh) && nilfs_page_buffers_clean(page))
+ clear_buffer_dirty(bh);
+ if (nilfs_page_buffers_clean(page))
__nilfs_clear_page_dirty(page);
clear_buffer_uptodate(bh);
diff --git a/fs/nilfs2/recovery.c b/fs/nilfs2/recovery.c
index 4fc081e47d7..57afa9d2406 100644
--- a/fs/nilfs2/recovery.c
+++ b/fs/nilfs2/recovery.c
@@ -407,6 +407,7 @@ void nilfs_dispose_segment_list(struct list_head *head)
}
static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs,
+ struct nilfs_sb_info *sbi,
struct nilfs_recovery_info *ri)
{
struct list_head *head = &ri->ri_used_segments;
@@ -421,6 +422,7 @@ static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs,
segnum[2] = ri->ri_segnum;
segnum[3] = ri->ri_nextnum;
+ nilfs_attach_writer(nilfs, sbi);
/*
* Releasing the next segment of the latest super root.
* The next segment is invalidated by this recovery.
@@ -459,10 +461,10 @@ static int nilfs_prepare_segment_for_recovery(struct the_nilfs *nilfs,
nilfs->ns_pseg_offset = 0;
nilfs->ns_seg_seq = ri->ri_seq + 2;
nilfs->ns_nextnum = nilfs->ns_segnum = segnum[0];
- return 0;
failed:
/* No need to recover sufile because it will be destroyed on error */
+ nilfs_detach_writer(nilfs, sbi);
return err;
}
@@ -728,7 +730,7 @@ int nilfs_recover_logical_segments(struct the_nilfs *nilfs,
goto failed;
if (ri->ri_need_recovery == NILFS_RECOVERY_ROLLFORWARD_DONE) {
- err = nilfs_prepare_segment_for_recovery(nilfs, ri);
+ err = nilfs_prepare_segment_for_recovery(nilfs, sbi, ri);
if (unlikely(err)) {
printk(KERN_ERR "NILFS: Error preparing segments for "
"recovery.\n");
diff --git a/fs/nilfs2/segment.c b/fs/nilfs2/segment.c
index fb70ec3be20..22c7f65c240 100644
--- a/fs/nilfs2/segment.c
+++ b/fs/nilfs2/segment.c
@@ -2589,7 +2589,8 @@ nilfs_remove_written_gcinodes(struct the_nilfs *nilfs, struct list_head *head)
}
}
-int nilfs_clean_segments(struct super_block *sb, void __user *argp)
+int nilfs_clean_segments(struct super_block *sb, struct nilfs_argv *argv,
+ void **kbufs)
{
struct nilfs_sb_info *sbi = NILFS_SB(sb);
struct nilfs_sc_info *sci = NILFS_SC(sbi);
@@ -2606,7 +2607,7 @@ int nilfs_clean_segments(struct super_block *sb, void __user *argp)
err = nilfs_init_gcdat_inode(nilfs);
if (unlikely(err))
goto out_unlock;
- err = nilfs_ioctl_prepare_clean_segments(nilfs, argp);
+ err = nilfs_ioctl_prepare_clean_segments(nilfs, argv, kbufs);
if (unlikely(err))
goto out_unlock;
diff --git a/fs/nilfs2/segment.h b/fs/nilfs2/segment.h
index a98fc1ed0bb..476bdd5df5b 100644
--- a/fs/nilfs2/segment.h
+++ b/fs/nilfs2/segment.h
@@ -222,7 +222,8 @@ extern int nilfs_construct_segment(struct super_block *);
extern int nilfs_construct_dsync_segment(struct super_block *, struct inode *,
loff_t, loff_t);
extern void nilfs_flush_segment(struct super_block *, ino_t);
-extern int nilfs_clean_segments(struct super_block *, void __user *);
+extern int nilfs_clean_segments(struct super_block *, struct nilfs_argv *,
+ void **);
extern int nilfs_segctor_add_segments_to_be_freed(struct nilfs_sc_info *,
__u64 *, size_t);
diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c
index bed766e435b..1634319e240 100644
--- a/fs/notify/inotify/inotify_user.c
+++ b/fs/notify/inotify/inotify_user.c
@@ -220,7 +220,7 @@ static struct inotify_kernel_event * kernel_event(s32 wd, u32 mask, u32 cookie,
rem = 0;
}
- kevent->name = kmalloc(len + rem, GFP_KERNEL);
+ kevent->name = kmalloc(len + rem, GFP_NOFS);
if (unlikely(!kevent->name)) {
kmem_cache_free(event_cachep, kevent);
return NULL;
diff --git a/fs/ocfs2/dcache.c b/fs/ocfs2/dcache.c
index 7d604480557..b574431a031 100644
--- a/fs/ocfs2/dcache.c
+++ b/fs/ocfs2/dcache.c
@@ -290,6 +290,21 @@ out_attach:
else
mlog_errno(ret);
+ /*
+ * In case of error, manually free the allocation and do the iput().
+ * We need to do this because error here means no d_instantiate(),
+ * which means iput() will not be called during dput(dentry).
+ */
+ if (ret < 0 && !alias) {
+ ocfs2_lock_res_free(&dl->dl_lockres);
+ BUG_ON(dl->dl_count != 1);
+ spin_lock(&dentry_attach_lock);
+ dentry->d_fsdata = NULL;
+ spin_unlock(&dentry_attach_lock);
+ kfree(dl);
+ iput(inode);
+ }
+
dput(alias);
return ret;
diff --git a/fs/ocfs2/dir.c b/fs/ocfs2/dir.c
index e71160cda11..c5752305627 100644
--- a/fs/ocfs2/dir.c
+++ b/fs/ocfs2/dir.c
@@ -2697,7 +2697,7 @@ static int ocfs2_dx_dir_index_block(struct inode *dir,
u32 *num_dx_entries,
struct buffer_head *dirent_bh)
{
- int ret, namelen, i;
+ int ret = 0, namelen, i;
char *de_buf, *limit;
struct ocfs2_dir_entry *de;
struct buffer_head *dx_leaf_bh;
@@ -2934,7 +2934,7 @@ static int ocfs2_expand_inline_dir(struct inode *dir, struct buffer_head *di_bh,
*/
BUG_ON(alloc > 2);
- ret = ocfs2_reserve_clusters(osb, alloc, &data_ac);
+ ret = ocfs2_reserve_clusters(osb, alloc + dx_alloc, &data_ac);
if (ret) {
mlog_errno(ret);
goto out;
diff --git a/fs/ocfs2/export.c b/fs/ocfs2/export.c
index de3da8eb558..15713cbb865 100644
--- a/fs/ocfs2/export.c
+++ b/fs/ocfs2/export.c
@@ -100,7 +100,8 @@ static struct dentry *ocfs2_get_dentry(struct super_block *sb,
/* If the inode allocator bit is clear, this inode must be stale */
if (!set) {
- mlog(0, "inode %llu suballoc bit is clear\n", blkno);
+ mlog(0, "inode %llu suballoc bit is clear\n",
+ (unsigned long long)blkno);
status = -ESTALE;
goto unlock_nfs_sync;
}
@@ -114,7 +115,7 @@ check_err:
if (status < 0) {
if (status == -ESTALE) {
mlog(0, "stale inode ino: %llu generation: %u\n",
- blkno, handle->ih_generation);
+ (unsigned long long)blkno, handle->ih_generation);
}
result = ERR_PTR(status);
goto bail;
@@ -129,8 +130,8 @@ check_err:
check_gen:
if (handle->ih_generation != inode->i_generation) {
iput(inode);
- mlog(0, "stale inode ino: %llu generation: %u\n", blkno,
- handle->ih_generation);
+ mlog(0, "stale inode ino: %llu generation: %u\n",
+ (unsigned long long)blkno, handle->ih_generation);
result = ERR_PTR(-ESTALE);
goto bail;
}
diff --git a/fs/ocfs2/journal.h b/fs/ocfs2/journal.h
index 619dd7f6c05..eb7b76331eb 100644
--- a/fs/ocfs2/journal.h
+++ b/fs/ocfs2/journal.h
@@ -437,8 +437,9 @@ static inline int ocfs2_unlink_credits(struct super_block *sb)
}
/* dinode + orphan dir dinode + inode alloc dinode + orphan dir entry +
- * inode alloc group descriptor + orphan dir index leaf */
-#define OCFS2_DELETE_INODE_CREDITS (3 * OCFS2_INODE_UPDATE_CREDITS + 3)
+ * inode alloc group descriptor + orphan dir index root +
+ * orphan dir index leaf */
+#define OCFS2_DELETE_INODE_CREDITS (3 * OCFS2_INODE_UPDATE_CREDITS + 4)
/* dinode update, old dir dinode update, new dir dinode update, old
* dir dir entry, new dir dir entry, dir entry update for renaming
diff --git a/fs/ocfs2/namei.c b/fs/ocfs2/namei.c
index 2220f93f668..33464c6b60a 100644
--- a/fs/ocfs2/namei.c
+++ b/fs/ocfs2/namei.c
@@ -1025,10 +1025,8 @@ static int ocfs2_rename(struct inode *old_dir,
struct inode *orphan_dir = NULL;
struct ocfs2_dinode *newfe = NULL;
char orphan_name[OCFS2_ORPHAN_NAMELEN + 1];
- struct buffer_head *orphan_entry_bh = NULL;
struct buffer_head *newfe_bh = NULL;
struct buffer_head *old_inode_bh = NULL;
- struct buffer_head *insert_entry_bh = NULL;
struct ocfs2_super *osb = NULL;
u64 newfe_blkno, old_de_ino;
handle_t *handle = NULL;
@@ -1455,8 +1453,6 @@ bail:
brelse(old_inode_bh);
brelse(old_dir_bh);
brelse(new_dir_bh);
- brelse(orphan_entry_bh);
- brelse(insert_entry_bh);
mlog_exit(status);
diff --git a/fs/ocfs2/suballoc.c b/fs/ocfs2/suballoc.c
index b4ca5911caa..8439f6b324b 100644
--- a/fs/ocfs2/suballoc.c
+++ b/fs/ocfs2/suballoc.c
@@ -2197,26 +2197,29 @@ static int ocfs2_get_suballoc_slot_bit(struct ocfs2_super *osb, u64 blkno,
struct buffer_head *inode_bh = NULL;
struct ocfs2_dinode *inode_fe;
- mlog_entry("blkno: %llu\n", blkno);
+ mlog_entry("blkno: %llu\n", (unsigned long long)blkno);
/* dirty read disk */
status = ocfs2_read_blocks_sync(osb, blkno, 1, &inode_bh);
if (status < 0) {
- mlog(ML_ERROR, "read block %llu failed %d\n", blkno, status);
+ mlog(ML_ERROR, "read block %llu failed %d\n",
+ (unsigned long long)blkno, status);
goto bail;
}
inode_fe = (struct ocfs2_dinode *) inode_bh->b_data;
if (!OCFS2_IS_VALID_DINODE(inode_fe)) {
- mlog(ML_ERROR, "invalid inode %llu requested\n", blkno);
+ mlog(ML_ERROR, "invalid inode %llu requested\n",
+ (unsigned long long)blkno);
status = -EINVAL;
goto bail;
}
- if (le16_to_cpu(inode_fe->i_suballoc_slot) != OCFS2_INVALID_SLOT &&
+ if (le16_to_cpu(inode_fe->i_suballoc_slot) != (u16)OCFS2_INVALID_SLOT &&
(u32)le16_to_cpu(inode_fe->i_suballoc_slot) > osb->max_slots - 1) {
mlog(ML_ERROR, "inode %llu has invalid suballoc slot %u\n",
- blkno, (u32)le16_to_cpu(inode_fe->i_suballoc_slot));
+ (unsigned long long)blkno,
+ (u32)le16_to_cpu(inode_fe->i_suballoc_slot));
status = -EINVAL;
goto bail;
}
@@ -2251,7 +2254,8 @@ static int ocfs2_test_suballoc_bit(struct ocfs2_super *osb,
u64 bg_blkno;
int status;
- mlog_entry("blkno: %llu bit: %u\n", blkno, (unsigned int)bit);
+ mlog_entry("blkno: %llu bit: %u\n", (unsigned long long)blkno,
+ (unsigned int)bit);
alloc_fe = (struct ocfs2_dinode *)alloc_bh->b_data;
if ((bit + 1) > ocfs2_bits_per_group(&alloc_fe->id2.i_chain)) {
@@ -2266,7 +2270,8 @@ static int ocfs2_test_suballoc_bit(struct ocfs2_super *osb,
status = ocfs2_read_group_descriptor(suballoc, alloc_fe, bg_blkno,
&group_bh);
if (status < 0) {
- mlog(ML_ERROR, "read group %llu failed %d\n", bg_blkno, status);
+ mlog(ML_ERROR, "read group %llu failed %d\n",
+ (unsigned long long)bg_blkno, status);
goto bail;
}
@@ -2300,7 +2305,7 @@ int ocfs2_test_inode_bit(struct ocfs2_super *osb, u64 blkno, int *res)
struct inode *inode_alloc_inode;
struct buffer_head *alloc_bh = NULL;
- mlog_entry("blkno: %llu", blkno);
+ mlog_entry("blkno: %llu", (unsigned long long)blkno);
status = ocfs2_get_suballoc_slot_bit(osb, blkno, &suballoc_slot,
&suballoc_bit);
diff --git a/fs/ocfs2/symlink.c b/fs/ocfs2/symlink.c
index ed0a0cfd68d..579dd1b1110 100644
--- a/fs/ocfs2/symlink.c
+++ b/fs/ocfs2/symlink.c
@@ -39,6 +39,7 @@
#include <linux/slab.h>
#include <linux/pagemap.h>
#include <linux/utsname.h>
+#include <linux/namei.h>
#define MLOG_MASK_PREFIX ML_NAMEI
#include <cluster/masklog.h>
@@ -54,26 +55,6 @@
#include "buffer_head_io.h"
-static char *ocfs2_page_getlink(struct dentry * dentry,
- struct page **ppage);
-static char *ocfs2_fast_symlink_getlink(struct inode *inode,
- struct buffer_head **bh);
-
-/* get the link contents into pagecache */
-static char *ocfs2_page_getlink(struct dentry * dentry,
- struct page **ppage)
-{
- struct page * page;
- struct address_space *mapping = dentry->d_inode->i_mapping;
- page = read_mapping_page(mapping, 0, NULL);
- if (IS_ERR(page))
- goto sync_fail;
- *ppage = page;
- return kmap(page);
-
-sync_fail:
- return (char*)page;
-}
static char *ocfs2_fast_symlink_getlink(struct inode *inode,
struct buffer_head **bh)
@@ -128,40 +109,55 @@ out:
return ret;
}
-static void *ocfs2_follow_link(struct dentry *dentry,
- struct nameidata *nd)
+static void *ocfs2_fast_follow_link(struct dentry *dentry,
+ struct nameidata *nd)
{
- int status;
- char *link;
+ int status = 0;
+ int len;
+ char *target, *link = ERR_PTR(-ENOMEM);
struct inode *inode = dentry->d_inode;
- struct page *page = NULL;
struct buffer_head *bh = NULL;
-
- if (ocfs2_inode_is_fast_symlink(inode))
- link = ocfs2_fast_symlink_getlink(inode, &bh);
- else
- link = ocfs2_page_getlink(dentry, &page);
- if (IS_ERR(link)) {
- status = PTR_ERR(link);
+
+ mlog_entry_void();
+
+ BUG_ON(!ocfs2_inode_is_fast_symlink(inode));
+ target = ocfs2_fast_symlink_getlink(inode, &bh);
+ if (IS_ERR(target)) {
+ status = PTR_ERR(target);
mlog_errno(status);
goto bail;
}
- status = vfs_follow_link(nd, link);
+ /* Fast symlinks can't be large */
+ len = strlen(target);
+ link = kzalloc(len + 1, GFP_NOFS);
+ if (!link) {
+ status = -ENOMEM;
+ mlog_errno(status);
+ goto bail;
+ }
+
+ memcpy(link, target, len);
+ nd_set_link(nd, link);
bail:
- if (page) {
- kunmap(page);
- page_cache_release(page);
- }
brelse(bh);
- return ERR_PTR(status);
+ mlog_exit(status);
+ return status ? ERR_PTR(status) : link;
+}
+
+static void ocfs2_fast_put_link(struct dentry *dentry, struct nameidata *nd, void *cookie)
+{
+ char *link = cookie;
+
+ kfree(link);
}
const struct inode_operations ocfs2_symlink_inode_operations = {
.readlink = page_readlink,
- .follow_link = ocfs2_follow_link,
+ .follow_link = page_follow_link_light,
+ .put_link = page_put_link,
.getattr = ocfs2_getattr,
.setattr = ocfs2_setattr,
.setxattr = generic_setxattr,
@@ -171,7 +167,8 @@ const struct inode_operations ocfs2_symlink_inode_operations = {
};
const struct inode_operations ocfs2_fast_symlink_inode_operations = {
.readlink = ocfs2_readlink,
- .follow_link = ocfs2_follow_link,
+ .follow_link = ocfs2_fast_follow_link,
+ .put_link = ocfs2_fast_put_link,
.getattr = ocfs2_getattr,
.setattr = ocfs2_setattr,
.setxattr = generic_setxattr,
diff --git a/fs/open.c b/fs/open.c
index 377eb25b6ab..bdfbf03615a 100644
--- a/fs/open.c
+++ b/fs/open.c
@@ -1033,7 +1033,7 @@ long do_sys_open(int dfd, const char __user *filename, int flags, int mode)
if (!IS_ERR(tmp)) {
fd = get_unused_fd_flags(flags);
if (fd >= 0) {
- struct file *f = do_filp_open(dfd, tmp, flags, mode);
+ struct file *f = do_filp_open(dfd, tmp, flags, mode, 0);
if (IS_ERR(f)) {
put_unused_fd(fd);
fd = PTR_ERR(f);
diff --git a/fs/proc/array.c b/fs/proc/array.c
index 7e4877d9dcb..725a650bbbb 100644
--- a/fs/proc/array.c
+++ b/fs/proc/array.c
@@ -80,6 +80,7 @@
#include <linux/delayacct.h>
#include <linux/seq_file.h>
#include <linux/pid_namespace.h>
+#include <linux/ptrace.h>
#include <linux/tracehook.h>
#include <asm/pgtable.h>
@@ -352,6 +353,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,
char state;
pid_t ppid = 0, pgid = -1, sid = -1;
int num_threads = 0;
+ int permitted;
struct mm_struct *mm;
unsigned long long start_time;
unsigned long cmin_flt = 0, cmaj_flt = 0;
@@ -364,11 +366,14 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,
state = *get_task_state(task);
vsize = eip = esp = 0;
+ permitted = ptrace_may_access(task, PTRACE_MODE_READ);
mm = get_task_mm(task);
if (mm) {
vsize = task_vsize(mm);
- eip = KSTK_EIP(task);
- esp = KSTK_ESP(task);
+ if (permitted) {
+ eip = KSTK_EIP(task);
+ esp = KSTK_ESP(task);
+ }
}
get_task_comm(tcomm, task);
@@ -424,7 +429,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,
unlock_task_sighand(task, &flags);
}
- if (!whole || num_threads < 2)
+ if (permitted && (!whole || num_threads < 2))
wchan = get_wchan(task);
if (!whole) {
min_flt = task->min_flt;
@@ -476,7 +481,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns,
rsslim,
mm ? mm->start_code : 0,
mm ? mm->end_code : 0,
- mm ? mm->start_stack : 0,
+ (permitted && mm) ? mm->start_stack : 0,
esp,
eip,
/* The signal information here is obsolete.
diff --git a/fs/proc/base.c b/fs/proc/base.c
index aa763ab0077..fb45615943c 100644
--- a/fs/proc/base.c
+++ b/fs/proc/base.c
@@ -322,7 +322,10 @@ static int proc_pid_wchan(struct task_struct *task, char *buffer)
wchan = get_wchan(task);
if (lookup_symbol_name(wchan, symname) < 0)
- return sprintf(buffer, "%lu", wchan);
+ if (!ptrace_may_access(task, PTRACE_MODE_READ))
+ return 0;
+ else
+ return sprintf(buffer, "%lu", wchan);
else
return sprintf(buffer, "%s", symname);
}
diff --git a/fs/proc/meminfo.c b/fs/proc/meminfo.c
index 74ea974f5ca..c6b0302af4c 100644
--- a/fs/proc/meminfo.c
+++ b/fs/proc/meminfo.c
@@ -35,7 +35,7 @@ static int meminfo_proc_show(struct seq_file *m, void *v)
#define K(x) ((x) << (PAGE_SHIFT - 10))
si_meminfo(&i);
si_swapinfo(&i);
- committed = atomic_long_read(&vm_committed_space);
+ committed = percpu_counter_read_positive(&vm_committed_as);
allowed = ((totalram_pages - hugetlb_total_pages())
* sysctl_overcommit_ratio / 100) + total_swap_pages;
diff --git a/fs/proc/root.c b/fs/proc/root.c
index 1e15a2b176e..b080b791d9e 100644
--- a/fs/proc/root.c
+++ b/fs/proc/root.c
@@ -67,8 +67,7 @@ static int proc_get_sb(struct file_system_type *fs_type,
sb->s_flags = flags;
err = proc_fill_super(sb);
if (err) {
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
return err;
}
diff --git a/fs/proc/task_mmu.c b/fs/proc/task_mmu.c
index 39e4ad4f59f..6f61b7cc32e 100644
--- a/fs/proc/task_mmu.c
+++ b/fs/proc/task_mmu.c
@@ -665,6 +665,10 @@ static ssize_t pagemap_read(struct file *file, char __user *buf,
goto out_task;
ret = 0;
+
+ if (!count)
+ goto out_task;
+
mm = get_task_mm(task);
if (!mm)
goto out_task;
diff --git a/fs/reiserfs/dir.c b/fs/reiserfs/dir.c
index 67a80d7e59e..45ee3d357c7 100644
--- a/fs/reiserfs/dir.c
+++ b/fs/reiserfs/dir.c
@@ -41,6 +41,18 @@ static int reiserfs_dir_fsync(struct file *filp, struct dentry *dentry,
#define store_ih(where,what) copy_item_head (where, what)
+static inline bool is_privroot_deh(struct dentry *dir,
+ struct reiserfs_de_head *deh)
+{
+ int ret = 0;
+#ifdef CONFIG_REISERFS_FS_XATTR
+ struct dentry *privroot = REISERFS_SB(dir->d_sb)->priv_root;
+ ret = (dir == dir->d_parent && privroot->d_inode &&
+ deh->deh_objectid == INODE_PKEY(privroot->d_inode)->k_objectid);
+#endif
+ return ret;
+}
+
int reiserfs_readdir_dentry(struct dentry *dentry, void *dirent,
filldir_t filldir, loff_t *pos)
{
@@ -138,18 +150,8 @@ int reiserfs_readdir_dentry(struct dentry *dentry, void *dirent,
}
/* Ignore the .reiserfs_priv entry */
- if (reiserfs_xattrs(inode->i_sb) &&
- !old_format_only(inode->i_sb) &&
- dentry == inode->i_sb->s_root &&
- REISERFS_SB(inode->i_sb)->priv_root &&
- REISERFS_SB(inode->i_sb)->priv_root->d_inode
- && deh_objectid(deh) ==
- le32_to_cpu(INODE_PKEY
- (REISERFS_SB(inode->i_sb)->
- priv_root->d_inode)->
- k_objectid)) {
+ if (is_privroot_deh(dentry, deh))
continue;
- }
d_off = deh_offset(deh);
*pos = d_off;
diff --git a/fs/reiserfs/namei.c b/fs/reiserfs/namei.c
index efd4d720718..27157912863 100644
--- a/fs/reiserfs/namei.c
+++ b/fs/reiserfs/namei.c
@@ -338,21 +338,8 @@ static struct dentry *reiserfs_lookup(struct inode *dir, struct dentry *dentry,
&path_to_entry, &de);
pathrelse(&path_to_entry);
if (retval == NAME_FOUND) {
- /* Hide the .reiserfs_priv directory */
- if (reiserfs_xattrs(dir->i_sb) &&
- !old_format_only(dir->i_sb) &&
- REISERFS_SB(dir->i_sb)->priv_root &&
- REISERFS_SB(dir->i_sb)->priv_root->d_inode &&
- de.de_objectid ==
- le32_to_cpu(INODE_PKEY
- (REISERFS_SB(dir->i_sb)->priv_root->d_inode)->
- k_objectid)) {
- reiserfs_write_unlock(dir->i_sb);
- return ERR_PTR(-EACCES);
- }
-
- inode =
- reiserfs_iget(dir->i_sb, (struct cpu_key *)&(de.de_dir_id));
+ inode = reiserfs_iget(dir->i_sb,
+ (struct cpu_key *)&(de.de_dir_id));
if (!inode || IS_ERR(inode)) {
reiserfs_write_unlock(dir->i_sb);
return ERR_PTR(-EACCES);
diff --git a/fs/reiserfs/super.c b/fs/reiserfs/super.c
index 0ae6486d904..3567fb9e3fb 100644
--- a/fs/reiserfs/super.c
+++ b/fs/reiserfs/super.c
@@ -448,13 +448,11 @@ int remove_save_link(struct inode *inode, int truncate)
static void reiserfs_kill_sb(struct super_block *s)
{
if (REISERFS_SB(s)) {
-#ifdef CONFIG_REISERFS_FS_XATTR
if (REISERFS_SB(s)->xattr_root) {
d_invalidate(REISERFS_SB(s)->xattr_root);
dput(REISERFS_SB(s)->xattr_root);
REISERFS_SB(s)->xattr_root = NULL;
}
-#endif
if (REISERFS_SB(s)->priv_root) {
d_invalidate(REISERFS_SB(s)->priv_root);
dput(REISERFS_SB(s)->priv_root);
@@ -1316,8 +1314,7 @@ static int reiserfs_remount(struct super_block *s, int *mount_flags, char *arg)
}
out_ok:
- kfree(s->s_options);
- s->s_options = new_opts;
+ replace_mount_options(s, new_opts);
return 0;
out_err:
@@ -1842,7 +1839,8 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
goto error;
}
- if ((errval = reiserfs_xattr_init(s, s->s_flags))) {
+ if ((errval = reiserfs_lookup_privroot(s)) ||
+ (errval = reiserfs_xattr_init(s, s->s_flags))) {
dput(s->s_root);
s->s_root = NULL;
goto error;
@@ -1855,7 +1853,8 @@ static int reiserfs_fill_super(struct super_block *s, void *data, int silent)
reiserfs_info(s, "using 3.5.x disk format\n");
}
- if ((errval = reiserfs_xattr_init(s, s->s_flags))) {
+ if ((errval = reiserfs_lookup_privroot(s)) ||
+ (errval = reiserfs_xattr_init(s, s->s_flags))) {
dput(s->s_root);
s->s_root = NULL;
goto error;
diff --git a/fs/reiserfs/xattr.c b/fs/reiserfs/xattr.c
index f83f52bae39..8e7deb0e696 100644
--- a/fs/reiserfs/xattr.c
+++ b/fs/reiserfs/xattr.c
@@ -113,41 +113,30 @@ static int xattr_rmdir(struct inode *dir, struct dentry *dentry)
#define xattr_may_create(flags) (!flags || flags & XATTR_CREATE)
-/* Returns and possibly creates the xattr dir. */
-static struct dentry *lookup_or_create_dir(struct dentry *parent,
- const char *name, int flags)
+static struct dentry *open_xa_root(struct super_block *sb, int flags)
{
- struct dentry *dentry;
- BUG_ON(!parent);
-
- dentry = lookup_one_len(name, parent, strlen(name));
- if (IS_ERR(dentry))
- return dentry;
- else if (!dentry->d_inode) {
- int err = -ENODATA;
+ struct dentry *privroot = REISERFS_SB(sb)->priv_root;
+ struct dentry *xaroot;
+ if (!privroot->d_inode)
+ return ERR_PTR(-ENODATA);
- if (xattr_may_create(flags)) {
- mutex_lock_nested(&parent->d_inode->i_mutex,
- I_MUTEX_XATTR);
- err = xattr_mkdir(parent->d_inode, dentry, 0700);
- mutex_unlock(&parent->d_inode->i_mutex);
- }
+ mutex_lock_nested(&privroot->d_inode->i_mutex, I_MUTEX_XATTR);
+ xaroot = dget(REISERFS_SB(sb)->xattr_root);
+ if (!xaroot)
+ xaroot = ERR_PTR(-ENODATA);
+ else if (!xaroot->d_inode) {
+ int err = -ENODATA;
+ if (xattr_may_create(flags))
+ err = xattr_mkdir(privroot->d_inode, xaroot, 0700);
if (err) {
- dput(dentry);
- dentry = ERR_PTR(err);
+ dput(xaroot);
+ xaroot = ERR_PTR(err);
}
}
- return dentry;
-}
-
-static struct dentry *open_xa_root(struct super_block *sb, int flags)
-{
- struct dentry *privroot = REISERFS_SB(sb)->priv_root;
- if (!privroot)
- return ERR_PTR(-ENODATA);
- return lookup_or_create_dir(privroot, XAROOT_NAME, flags);
+ mutex_unlock(&privroot->d_inode->i_mutex);
+ return xaroot;
}
static struct dentry *open_xa_dir(const struct inode *inode, int flags)
@@ -163,10 +152,22 @@ static struct dentry *open_xa_dir(const struct inode *inode, int flags)
le32_to_cpu(INODE_PKEY(inode)->k_objectid),
inode->i_generation);
- xadir = lookup_or_create_dir(xaroot, namebuf, flags);
+ mutex_lock_nested(&xaroot->d_inode->i_mutex, I_MUTEX_XATTR);
+
+ xadir = lookup_one_len(namebuf, xaroot, strlen(namebuf));
+ if (!IS_ERR(xadir) && !xadir->d_inode) {
+ int err = -ENODATA;
+ if (xattr_may_create(flags))
+ err = xattr_mkdir(xaroot->d_inode, xadir, 0700);
+ if (err) {
+ dput(xadir);
+ xadir = ERR_PTR(err);
+ }
+ }
+
+ mutex_unlock(&xaroot->d_inode->i_mutex);
dput(xaroot);
return xadir;
-
}
/* The following are side effects of other operations that aren't explicitly
@@ -184,6 +185,7 @@ fill_with_dentries(void *buf, const char *name, int namelen, loff_t offset,
{
struct reiserfs_dentry_buf *dbuf = buf;
struct dentry *dentry;
+ WARN_ON_ONCE(!mutex_is_locked(&dbuf->xadir->d_inode->i_mutex));
if (dbuf->count == ARRAY_SIZE(dbuf->dentries))
return -ENOSPC;
@@ -349,6 +351,7 @@ static struct dentry *xattr_lookup(struct inode *inode, const char *name,
if (IS_ERR(xadir))
return ERR_CAST(xadir);
+ mutex_lock_nested(&xadir->d_inode->i_mutex, I_MUTEX_XATTR);
xafile = lookup_one_len(name, xadir, strlen(name));
if (IS_ERR(xafile)) {
err = PTR_ERR(xafile);
@@ -360,18 +363,15 @@ static struct dentry *xattr_lookup(struct inode *inode, const char *name,
if (!xafile->d_inode) {
err = -ENODATA;
- if (xattr_may_create(flags)) {
- mutex_lock_nested(&xadir->d_inode->i_mutex,
- I_MUTEX_XATTR);
+ if (xattr_may_create(flags))
err = xattr_create(xadir->d_inode, xafile,
0700|S_IFREG);
- mutex_unlock(&xadir->d_inode->i_mutex);
- }
}
if (err)
dput(xafile);
out:
+ mutex_unlock(&xadir->d_inode->i_mutex);
dput(xadir);
if (err)
return ERR_PTR(err);
@@ -435,6 +435,7 @@ static int lookup_and_delete_xattr(struct inode *inode, const char *name)
if (IS_ERR(xadir))
return PTR_ERR(xadir);
+ mutex_lock_nested(&xadir->d_inode->i_mutex, I_MUTEX_XATTR);
dentry = lookup_one_len(name, xadir, strlen(name));
if (IS_ERR(dentry)) {
err = PTR_ERR(dentry);
@@ -442,14 +443,13 @@ static int lookup_and_delete_xattr(struct inode *inode, const char *name)
}
if (dentry->d_inode) {
- mutex_lock_nested(&xadir->d_inode->i_mutex, I_MUTEX_XATTR);
err = xattr_unlink(xadir->d_inode, dentry);
- mutex_unlock(&xadir->d_inode->i_mutex);
update_ctime(inode);
}
dput(dentry);
out_dput:
+ mutex_unlock(&xadir->d_inode->i_mutex);
dput(xadir);
return err;
}
@@ -687,20 +687,6 @@ out:
return err;
}
-/* Actual operations that are exported to VFS-land */
-struct xattr_handler *reiserfs_xattr_handlers[] = {
- &reiserfs_xattr_user_handler,
- &reiserfs_xattr_trusted_handler,
-#ifdef CONFIG_REISERFS_FS_SECURITY
- &reiserfs_xattr_security_handler,
-#endif
-#ifdef CONFIG_REISERFS_FS_POSIX_ACL
- &reiserfs_posix_acl_access_handler,
- &reiserfs_posix_acl_default_handler,
-#endif
- NULL
-};
-
/*
* In order to implement different sets of xattr operations for each xattr
* prefix with the generic xattr API, a filesystem should create a
@@ -843,7 +829,7 @@ ssize_t reiserfs_listxattr(struct dentry * dentry, char *buffer, size_t size)
if (!dentry->d_inode)
return -EINVAL;
- if (!reiserfs_xattrs(dentry->d_sb) ||
+ if (!dentry->d_sb->s_xattr ||
get_inode_sd_version(dentry->d_inode) == STAT_DATA_V1)
return -EOPNOTSUPP;
@@ -885,42 +871,50 @@ static int reiserfs_check_acl(struct inode *inode, int mask)
return error;
}
-int reiserfs_permission(struct inode *inode, int mask)
-{
- /*
- * We don't do permission checks on the internal objects.
- * Permissions are determined by the "owning" object.
- */
- if (IS_PRIVATE(inode))
- return 0;
- /*
- * Stat data v1 doesn't support ACLs.
- */
- if (get_inode_sd_version(inode) == STAT_DATA_V1)
- return generic_permission(inode, mask, NULL);
- else
- return generic_permission(inode, mask, reiserfs_check_acl);
-}
-
static int create_privroot(struct dentry *dentry)
{
int err;
struct inode *inode = dentry->d_parent->d_inode;
- mutex_lock_nested(&inode->i_mutex, I_MUTEX_XATTR);
+ WARN_ON_ONCE(!mutex_is_locked(&inode->i_mutex));
+
err = xattr_mkdir(inode, dentry, 0700);
- mutex_unlock(&inode->i_mutex);
- if (err) {
- dput(dentry);
- dentry = NULL;
+ if (err || !dentry->d_inode) {
+ reiserfs_warning(dentry->d_sb, "jdm-20006",
+ "xattrs/ACLs enabled and couldn't "
+ "find/create .reiserfs_priv. "
+ "Failing mount.");
+ return -EOPNOTSUPP;
}
- if (dentry && dentry->d_inode)
- reiserfs_info(dentry->d_sb, "Created %s - reserved for xattr "
- "storage.\n", PRIVROOT_NAME);
+ dentry->d_inode->i_flags |= S_PRIVATE;
+ reiserfs_info(dentry->d_sb, "Created %s - reserved for xattr "
+ "storage.\n", PRIVROOT_NAME);
- return err;
+ return 0;
}
+#else
+int __init reiserfs_xattr_register_handlers(void) { return 0; }
+void reiserfs_xattr_unregister_handlers(void) {}
+static int create_privroot(struct dentry *dentry) { return 0; }
+#endif
+
+/* Actual operations that are exported to VFS-land */
+struct xattr_handler *reiserfs_xattr_handlers[] = {
+#ifdef CONFIG_REISERFS_FS_XATTR
+ &reiserfs_xattr_user_handler,
+ &reiserfs_xattr_trusted_handler,
+#endif
+#ifdef CONFIG_REISERFS_FS_SECURITY
+ &reiserfs_xattr_security_handler,
+#endif
+#ifdef CONFIG_REISERFS_FS_POSIX_ACL
+ &reiserfs_posix_acl_access_handler,
+ &reiserfs_posix_acl_default_handler,
+#endif
+ NULL
+};
+
static int xattr_mount_check(struct super_block *s)
{
/* We need generation numbers to ensure that the oid mapping is correct
@@ -940,21 +934,33 @@ static int xattr_mount_check(struct super_block *s)
return 0;
}
-#else
-int __init reiserfs_xattr_register_handlers(void) { return 0; }
-void reiserfs_xattr_unregister_handlers(void) {}
+int reiserfs_permission(struct inode *inode, int mask)
+{
+ /*
+ * We don't do permission checks on the internal objects.
+ * Permissions are determined by the "owning" object.
+ */
+ if (IS_PRIVATE(inode))
+ return 0;
+
+#ifdef CONFIG_REISERFS_FS_XATTR
+ /*
+ * Stat data v1 doesn't support ACLs.
+ */
+ if (get_inode_sd_version(inode) != STAT_DATA_V1)
+ return generic_permission(inode, mask, reiserfs_check_acl);
#endif
+ return generic_permission(inode, mask, NULL);
+}
/* This will catch lookups from the fs root to .reiserfs_priv */
static int
xattr_lookup_poison(struct dentry *dentry, struct qstr *q1, struct qstr *name)
{
struct dentry *priv_root = REISERFS_SB(dentry->d_sb)->priv_root;
- if (name->len == priv_root->d_name.len &&
- name->hash == priv_root->d_name.hash &&
- !memcmp(name->name, priv_root->d_name.name, name->len)) {
+ if (container_of(q1, struct dentry, d_name) == priv_root)
return -ENOENT;
- } else if (q1->len == name->len &&
+ if (q1->len == name->len &&
!memcmp(q1->name, name->name, name->len))
return 0;
return 1;
@@ -964,73 +970,71 @@ static const struct dentry_operations xattr_lookup_poison_ops = {
.d_compare = xattr_lookup_poison,
};
+int reiserfs_lookup_privroot(struct super_block *s)
+{
+ struct dentry *dentry;
+ int err = 0;
+
+ /* If we don't have the privroot located yet - go find it */
+ mutex_lock(&s->s_root->d_inode->i_mutex);
+ dentry = lookup_one_len(PRIVROOT_NAME, s->s_root,
+ strlen(PRIVROOT_NAME));
+ if (!IS_ERR(dentry)) {
+ REISERFS_SB(s)->priv_root = dentry;
+ s->s_root->d_op = &xattr_lookup_poison_ops;
+ if (dentry->d_inode)
+ dentry->d_inode->i_flags |= S_PRIVATE;
+ } else
+ err = PTR_ERR(dentry);
+ mutex_unlock(&s->s_root->d_inode->i_mutex);
+
+ return err;
+}
+
/* We need to take a copy of the mount flags since things like
* MS_RDONLY don't get set until *after* we're called.
* mount_flags != mount_options */
int reiserfs_xattr_init(struct super_block *s, int mount_flags)
{
int err = 0;
+ struct dentry *privroot = REISERFS_SB(s)->priv_root;
-#ifdef CONFIG_REISERFS_FS_XATTR
err = xattr_mount_check(s);
if (err)
goto error;
-#endif
- /* If we don't have the privroot located yet - go find it */
- if (!REISERFS_SB(s)->priv_root) {
- struct dentry *dentry;
- dentry = lookup_one_len(PRIVROOT_NAME, s->s_root,
- strlen(PRIVROOT_NAME));
- if (!IS_ERR(dentry)) {
-#ifdef CONFIG_REISERFS_FS_XATTR
- if (!(mount_flags & MS_RDONLY) && !dentry->d_inode)
- err = create_privroot(dentry);
-#endif
- if (!dentry->d_inode) {
- dput(dentry);
- dentry = NULL;
- }
- } else
- err = PTR_ERR(dentry);
-
- if (!err && dentry) {
- s->s_root->d_op = &xattr_lookup_poison_ops;
- dentry->d_inode->i_flags |= S_PRIVATE;
- REISERFS_SB(s)->priv_root = dentry;
-#ifdef CONFIG_REISERFS_FS_XATTR
- /* xattrs are unavailable */
- } else if (!(mount_flags & MS_RDONLY)) {
- /* If we're read-only it just means that the dir
- * hasn't been created. Not an error -- just no
- * xattrs on the fs. We'll check again if we
- * go read-write */
- reiserfs_warning(s, "jdm-20006",
- "xattrs/ACLs enabled and couldn't "
- "find/create .reiserfs_priv. "
- "Failing mount.");
- err = -EOPNOTSUPP;
-#endif
- }
+ if (!privroot->d_inode && !(mount_flags & MS_RDONLY)) {
+ mutex_lock(&s->s_root->d_inode->i_mutex);
+ err = create_privroot(REISERFS_SB(s)->priv_root);
+ mutex_unlock(&s->s_root->d_inode->i_mutex);
}
-#ifdef CONFIG_REISERFS_FS_XATTR
- if (!err)
+ if (privroot->d_inode) {
s->s_xattr = reiserfs_xattr_handlers;
+ mutex_lock(&privroot->d_inode->i_mutex);
+ if (!REISERFS_SB(s)->xattr_root) {
+ struct dentry *dentry;
+ dentry = lookup_one_len(XAROOT_NAME, privroot,
+ strlen(XAROOT_NAME));
+ if (!IS_ERR(dentry))
+ REISERFS_SB(s)->xattr_root = dentry;
+ else
+ err = PTR_ERR(dentry);
+ }
+ mutex_unlock(&privroot->d_inode->i_mutex);
+ }
error:
if (err) {
clear_bit(REISERFS_XATTRS_USER, &(REISERFS_SB(s)->s_mount_opt));
clear_bit(REISERFS_POSIXACL, &(REISERFS_SB(s)->s_mount_opt));
}
-#endif
/* The super_block MS_POSIXACL must mirror the (no)acl mount option. */
- s->s_flags = s->s_flags & ~MS_POSIXACL;
-#ifdef CONFIG_REISERFS_FS_POSIX_ACL
if (reiserfs_posixacl(s))
s->s_flags |= MS_POSIXACL;
-#endif
+ else
+ s->s_flags &= ~MS_POSIXACL;
return err;
}
diff --git a/fs/reiserfs/xattr_security.c b/fs/reiserfs/xattr_security.c
index 4d3c20e787c..a92c8792c0f 100644
--- a/fs/reiserfs/xattr_security.c
+++ b/fs/reiserfs/xattr_security.c
@@ -55,8 +55,16 @@ int reiserfs_security_init(struct inode *dir, struct inode *inode,
struct reiserfs_security_handle *sec)
{
int blocks = 0;
- int error = security_inode_init_security(inode, dir, &sec->name,
- &sec->value, &sec->length);
+ int error;
+
+ sec->name = NULL;
+
+ /* Don't add selinux attributes on xattrs - they'll never get used */
+ if (IS_PRIVATE(dir))
+ return 0;
+
+ error = security_inode_init_security(inode, dir, &sec->name,
+ &sec->value, &sec->length);
if (error) {
if (error == -EOPNOTSUPP)
error = 0;
diff --git a/fs/romfs/super.c b/fs/romfs/super.c
index c53b5ef8a02..4ab3c03d8f9 100644
--- a/fs/romfs/super.c
+++ b/fs/romfs/super.c
@@ -298,7 +298,8 @@ static struct inode *romfs_iget(struct super_block *sb, unsigned long pos)
struct romfs_inode ri;
struct inode *i;
unsigned long nlen;
- unsigned nextfh, ret;
+ unsigned nextfh;
+ int ret;
umode_t mode;
/* we might have to traverse a chain of "hard link" file entries to get
diff --git a/fs/squashfs/Makefile b/fs/squashfs/Makefile
index 8258cf9a031..70e3244fa30 100644
--- a/fs/squashfs/Makefile
+++ b/fs/squashfs/Makefile
@@ -5,4 +5,3 @@
obj-$(CONFIG_SQUASHFS) += squashfs.o
squashfs-y += block.o cache.o dir.o export.o file.o fragment.o id.o inode.o
squashfs-y += namei.o super.o symlink.o
-#squashfs-y += squashfs2_0.o
diff --git a/fs/squashfs/cache.c b/fs/squashfs/cache.c
index 1c4739e33af..40c98fa6b5d 100644
--- a/fs/squashfs/cache.c
+++ b/fs/squashfs/cache.c
@@ -252,6 +252,7 @@ struct squashfs_cache *squashfs_cache_init(char *name, int entries,
cache->entries = entries;
cache->block_size = block_size;
cache->pages = block_size >> PAGE_CACHE_SHIFT;
+ cache->pages = cache->pages ? cache->pages : 1;
cache->name = name;
cache->num_waiters = 0;
spin_lock_init(&cache->lock);
diff --git a/fs/squashfs/super.c b/fs/squashfs/super.c
index ffa6edcd2d0..0adc624c956 100644
--- a/fs/squashfs/super.c
+++ b/fs/squashfs/super.c
@@ -157,6 +157,16 @@ static int squashfs_fill_super(struct super_block *sb, void *data, int silent)
if (msblk->block_size > SQUASHFS_FILE_MAX_SIZE)
goto failed_mount;
+ /*
+ * Check the system page size is not larger than the filesystem
+ * block size (by default 128K). This is currently not supported.
+ */
+ if (PAGE_CACHE_SIZE > msblk->block_size) {
+ ERROR("Page size > filesystem block size (%d). This is "
+ "currently not supported!\n", msblk->block_size);
+ goto failed_mount;
+ }
+
msblk->block_log = le16_to_cpu(sblk->block_log);
if (msblk->block_log > SQUASHFS_FILE_MAX_LOG)
goto failed_mount;
diff --git a/fs/super.c b/fs/super.c
index 786fe7d7279..1943fdf655f 100644
--- a/fs/super.c
+++ b/fs/super.c
@@ -208,6 +208,34 @@ void deactivate_super(struct super_block *s)
EXPORT_SYMBOL(deactivate_super);
/**
+ * deactivate_locked_super - drop an active reference to superblock
+ * @s: superblock to deactivate
+ *
+ * Equivalent of up_write(&s->s_umount); deactivate_super(s);, except that
+ * it does not unlock it until it's all over. As the result, it's safe to
+ * use to dispose of new superblock on ->get_sb() failure exits - nobody
+ * will see the sucker until it's all over. Equivalent using up_write +
+ * deactivate_super is safe for that purpose only if superblock is either
+ * safe to use or has NULL ->s_root when we unlock.
+ */
+void deactivate_locked_super(struct super_block *s)
+{
+ struct file_system_type *fs = s->s_type;
+ if (atomic_dec_and_lock(&s->s_active, &sb_lock)) {
+ s->s_count -= S_BIAS-1;
+ spin_unlock(&sb_lock);
+ vfs_dq_off(s, 0);
+ fs->kill_sb(s);
+ put_filesystem(fs);
+ put_super(s);
+ } else {
+ up_write(&s->s_umount);
+ }
+}
+
+EXPORT_SYMBOL(deactivate_locked_super);
+
+/**
* grab_super - acquire an active reference
* @s: reference we are trying to make active
*
@@ -797,8 +825,7 @@ int get_sb_ns(struct file_system_type *fs_type, int flags, void *data,
sb->s_flags = flags;
err = fill_super(sb, data, flags & MS_SILENT ? 1 : 0);
if (err) {
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
return err;
}
@@ -854,8 +881,7 @@ int get_sb_bdev(struct file_system_type *fs_type,
if (s->s_root) {
if ((flags ^ s->s_flags) & MS_RDONLY) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
error = -EBUSY;
goto error_bdev;
}
@@ -870,8 +896,7 @@ int get_sb_bdev(struct file_system_type *fs_type,
sb_set_blocksize(s, block_size(bdev));
error = fill_super(s, data, flags & MS_SILENT ? 1 : 0);
if (error) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
goto error;
}
@@ -897,7 +922,7 @@ void kill_block_super(struct super_block *sb)
struct block_device *bdev = sb->s_bdev;
fmode_t mode = sb->s_mode;
- bdev->bd_super = 0;
+ bdev->bd_super = NULL;
generic_shutdown_super(sb);
sync_blockdev(bdev);
close_bdev_exclusive(bdev, mode);
@@ -921,8 +946,7 @@ int get_sb_nodev(struct file_system_type *fs_type,
error = fill_super(s, data, flags & MS_SILENT ? 1 : 0);
if (error) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
return error;
}
s->s_flags |= MS_ACTIVE;
@@ -952,8 +976,7 @@ int get_sb_single(struct file_system_type *fs_type,
s->s_flags = flags;
error = fill_super(s, data, flags & MS_SILENT ? 1 : 0);
if (error) {
- up_write(&s->s_umount);
- deactivate_super(s);
+ deactivate_locked_super(s);
return error;
}
s->s_flags |= MS_ACTIVE;
@@ -1006,8 +1029,7 @@ vfs_kern_mount(struct file_system_type *type, int flags, const char *name, void
return mnt;
out_sb:
dput(mnt->mnt_root);
- up_write(&mnt->mnt_sb->s_umount);
- deactivate_super(mnt->mnt_sb);
+ deactivate_locked_super(mnt->mnt_sb);
out_free_secdata:
free_secdata(secdata);
out_mnt:
diff --git a/fs/ubifs/super.c b/fs/ubifs/super.c
index faa44f90608..e9f7a754c4f 100644
--- a/fs/ubifs/super.c
+++ b/fs/ubifs/super.c
@@ -2055,8 +2055,7 @@ static int ubifs_get_sb(struct file_system_type *fs_type, int flags,
return 0;
out_deact:
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
out_close:
ubi_close_volume(ubi);
return err;
diff --git a/fs/ufs/dir.c b/fs/ufs/dir.c
index dbbbc466876..6321b797061 100644
--- a/fs/ufs/dir.c
+++ b/fs/ufs/dir.c
@@ -666,6 +666,6 @@ not_empty:
const struct file_operations ufs_dir_operations = {
.read = generic_read_dir,
.readdir = ufs_readdir,
- .fsync = file_fsync,
+ .fsync = ufs_sync_file,
.llseek = generic_file_llseek,
};
diff --git a/fs/ufs/file.c b/fs/ufs/file.c
index 625ef17c6f8..2bd3a161571 100644
--- a/fs/ufs/file.c
+++ b/fs/ufs/file.c
@@ -30,7 +30,7 @@
#include "ufs.h"
-static int ufs_sync_file(struct file *file, struct dentry *dentry, int datasync)
+int ufs_sync_file(struct file *file, struct dentry *dentry, int datasync)
{
struct inode *inode = dentry->d_inode;
int err;
diff --git a/fs/ufs/ufs.h b/fs/ufs/ufs.h
index 69b3427d788..d0c4acd4f1f 100644
--- a/fs/ufs/ufs.h
+++ b/fs/ufs/ufs.h
@@ -98,8 +98,8 @@ extern void ufs_set_link(struct inode *dir, struct ufs_dir_entry *de,
/* file.c */
extern const struct inode_operations ufs_file_inode_operations;
extern const struct file_operations ufs_file_operations;
-
extern const struct address_space_operations ufs_aops;
+extern int ufs_sync_file(struct file *, struct dentry *, int);
/* ialloc.c */
extern void ufs_free_inode (struct inode *inode);
diff --git a/fs/xfs/xfs_bmap.c b/fs/xfs/xfs_bmap.c
index 3a6ed426327..ca7c6005a48 100644
--- a/fs/xfs/xfs_bmap.c
+++ b/fs/xfs/xfs_bmap.c
@@ -5880,7 +5880,7 @@ xfs_getbmap(
void *arg) /* formatter arg */
{
__int64_t bmvend; /* last block requested */
- int error; /* return value */
+ int error = 0; /* return value */
__int64_t fixlen; /* length for -1 case */
int i; /* extent number */
int lock; /* lock state */
@@ -5890,39 +5890,18 @@ xfs_getbmap(
int nexleft; /* # of user extents left */
int subnex; /* # of bmapi's can do */
int nmap; /* number of map entries */
- struct getbmapx out; /* output structure */
+ struct getbmapx *out; /* output structure */
int whichfork; /* data or attr fork */
int prealloced; /* this is a file with
* preallocated data space */
int iflags; /* interface flags */
int bmapi_flags; /* flags for xfs_bmapi */
+ int cur_ext = 0;
mp = ip->i_mount;
iflags = bmv->bmv_iflags;
-
whichfork = iflags & BMV_IF_ATTRFORK ? XFS_ATTR_FORK : XFS_DATA_FORK;
- /* If the BMV_IF_NO_DMAPI_READ interface bit specified, do not
- * generate a DMAPI read event. Otherwise, if the DM_EVENT_READ
- * bit is set for the file, generate a read event in order
- * that the DMAPI application may do its thing before we return
- * the extents. Usually this means restoring user file data to
- * regions of the file that look like holes.
- *
- * The "old behavior" (from XFS_IOC_GETBMAP) is to not specify
- * BMV_IF_NO_DMAPI_READ so that read events are generated.
- * If this were not true, callers of ioctl( XFS_IOC_GETBMAP )
- * could misinterpret holes in a DMAPI file as true holes,
- * when in fact they may represent offline user data.
- */
- if ((iflags & BMV_IF_NO_DMAPI_READ) == 0 &&
- DM_EVENT_ENABLED(ip, DM_EVENT_READ) &&
- whichfork == XFS_DATA_FORK) {
- error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip, 0, 0, 0, NULL);
- if (error)
- return XFS_ERROR(error);
- }
-
if (whichfork == XFS_ATTR_FORK) {
if (XFS_IFORK_Q(ip)) {
if (ip->i_d.di_aformat != XFS_DINODE_FMT_EXTENTS &&
@@ -5936,11 +5915,37 @@ xfs_getbmap(
ip->i_mount);
return XFS_ERROR(EFSCORRUPTED);
}
- } else if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS &&
- ip->i_d.di_format != XFS_DINODE_FMT_BTREE &&
- ip->i_d.di_format != XFS_DINODE_FMT_LOCAL)
- return XFS_ERROR(EINVAL);
- if (whichfork == XFS_DATA_FORK) {
+
+ prealloced = 0;
+ fixlen = 1LL << 32;
+ } else {
+ /*
+ * If the BMV_IF_NO_DMAPI_READ interface bit specified, do
+ * not generate a DMAPI read event. Otherwise, if the
+ * DM_EVENT_READ bit is set for the file, generate a read
+ * event in order that the DMAPI application may do its thing
+ * before we return the extents. Usually this means restoring
+ * user file data to regions of the file that look like holes.
+ *
+ * The "old behavior" (from XFS_IOC_GETBMAP) is to not specify
+ * BMV_IF_NO_DMAPI_READ so that read events are generated.
+ * If this were not true, callers of ioctl(XFS_IOC_GETBMAP)
+ * could misinterpret holes in a DMAPI file as true holes,
+ * when in fact they may represent offline user data.
+ */
+ if (DM_EVENT_ENABLED(ip, DM_EVENT_READ) &&
+ !(iflags & BMV_IF_NO_DMAPI_READ)) {
+ error = XFS_SEND_DATA(mp, DM_EVENT_READ, ip,
+ 0, 0, 0, NULL);
+ if (error)
+ return XFS_ERROR(error);
+ }
+
+ if (ip->i_d.di_format != XFS_DINODE_FMT_EXTENTS &&
+ ip->i_d.di_format != XFS_DINODE_FMT_BTREE &&
+ ip->i_d.di_format != XFS_DINODE_FMT_LOCAL)
+ return XFS_ERROR(EINVAL);
+
if (xfs_get_extsz_hint(ip) ||
ip->i_d.di_flags & (XFS_DIFLAG_PREALLOC|XFS_DIFLAG_APPEND)){
prealloced = 1;
@@ -5949,42 +5954,41 @@ xfs_getbmap(
prealloced = 0;
fixlen = ip->i_size;
}
- } else {
- prealloced = 0;
- fixlen = 1LL << 32;
}
if (bmv->bmv_length == -1) {
fixlen = XFS_FSB_TO_BB(mp, XFS_B_TO_FSB(mp, fixlen));
- bmv->bmv_length = MAX( (__int64_t)(fixlen - bmv->bmv_offset),
- (__int64_t)0);
- } else if (bmv->bmv_length < 0)
- return XFS_ERROR(EINVAL);
- if (bmv->bmv_length == 0) {
+ bmv->bmv_length =
+ max_t(__int64_t, fixlen - bmv->bmv_offset, 0);
+ } else if (bmv->bmv_length == 0) {
bmv->bmv_entries = 0;
return 0;
+ } else if (bmv->bmv_length < 0) {
+ return XFS_ERROR(EINVAL);
}
+
nex = bmv->bmv_count - 1;
if (nex <= 0)
return XFS_ERROR(EINVAL);
bmvend = bmv->bmv_offset + bmv->bmv_length;
- xfs_ilock(ip, XFS_IOLOCK_SHARED);
- if (((iflags & BMV_IF_DELALLOC) == 0) &&
- (whichfork == XFS_DATA_FORK) &&
- (ip->i_delayed_blks || ip->i_size > ip->i_d.di_size)) {
- /* xfs_fsize_t last_byte = xfs_file_last_byte(ip); */
- error = xfs_flush_pages(ip, (xfs_off_t)0,
- -1, 0, FI_REMAPF);
- if (error) {
- xfs_iunlock(ip, XFS_IOLOCK_SHARED);
- return error;
+ if (bmv->bmv_count > ULONG_MAX / sizeof(struct getbmapx))
+ return XFS_ERROR(ENOMEM);
+ out = kmem_zalloc(bmv->bmv_count * sizeof(struct getbmapx), KM_MAYFAIL);
+ if (!out)
+ return XFS_ERROR(ENOMEM);
+
+ xfs_ilock(ip, XFS_IOLOCK_SHARED);
+ if (whichfork == XFS_DATA_FORK && !(iflags & BMV_IF_DELALLOC)) {
+ if (ip->i_delayed_blks || ip->i_size > ip->i_d.di_size) {
+ error = xfs_flush_pages(ip, 0, -1, 0, FI_REMAPF);
+ if (error)
+ goto out_unlock_iolock;
}
- }
- ASSERT(whichfork == XFS_ATTR_FORK || (iflags & BMV_IF_DELALLOC) ||
- ip->i_delayed_blks == 0);
+ ASSERT(ip->i_delayed_blks == 0);
+ }
lock = xfs_ilock_map_shared(ip);
@@ -5995,23 +5999,25 @@ xfs_getbmap(
if (nex > XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1)
nex = XFS_IFORK_NEXTENTS(ip, whichfork) * 2 + 1;
- bmapi_flags = xfs_bmapi_aflag(whichfork) |
- ((iflags & BMV_IF_PREALLOC) ? 0 : XFS_BMAPI_IGSTATE);
+ bmapi_flags = xfs_bmapi_aflag(whichfork);
+ if (!(iflags & BMV_IF_PREALLOC))
+ bmapi_flags |= XFS_BMAPI_IGSTATE;
/*
* Allocate enough space to handle "subnex" maps at a time.
*/
+ error = ENOMEM;
subnex = 16;
- map = kmem_alloc(subnex * sizeof(*map), KM_SLEEP);
+ map = kmem_alloc(subnex * sizeof(*map), KM_MAYFAIL);
+ if (!map)
+ goto out_unlock_ilock;
bmv->bmv_entries = 0;
- if ((XFS_IFORK_NEXTENTS(ip, whichfork) == 0)) {
- if (((iflags & BMV_IF_DELALLOC) == 0) ||
- whichfork == XFS_ATTR_FORK) {
- error = 0;
- goto unlock_and_return;
- }
+ if (XFS_IFORK_NEXTENTS(ip, whichfork) == 0 &&
+ (whichfork == XFS_ATTR_FORK || !(iflags & BMV_IF_DELALLOC))) {
+ error = 0;
+ goto out_free_map;
}
nexleft = nex;
@@ -6023,53 +6029,61 @@ xfs_getbmap(
bmapi_flags, NULL, 0, map, &nmap,
NULL, NULL);
if (error)
- goto unlock_and_return;
+ goto out_free_map;
ASSERT(nmap <= subnex);
for (i = 0; i < nmap && nexleft && bmv->bmv_length; i++) {
- out.bmv_oflags = 0;
+ out[cur_ext].bmv_oflags = 0;
if (map[i].br_state == XFS_EXT_UNWRITTEN)
- out.bmv_oflags |= BMV_OF_PREALLOC;
+ out[cur_ext].bmv_oflags |= BMV_OF_PREALLOC;
else if (map[i].br_startblock == DELAYSTARTBLOCK)
- out.bmv_oflags |= BMV_OF_DELALLOC;
- out.bmv_offset = XFS_FSB_TO_BB(mp, map[i].br_startoff);
- out.bmv_length = XFS_FSB_TO_BB(mp, map[i].br_blockcount);
- out.bmv_unused1 = out.bmv_unused2 = 0;
+ out[cur_ext].bmv_oflags |= BMV_OF_DELALLOC;
+ out[cur_ext].bmv_offset =
+ XFS_FSB_TO_BB(mp, map[i].br_startoff);
+ out[cur_ext].bmv_length =
+ XFS_FSB_TO_BB(mp, map[i].br_blockcount);
+ out[cur_ext].bmv_unused1 = 0;
+ out[cur_ext].bmv_unused2 = 0;
ASSERT(((iflags & BMV_IF_DELALLOC) != 0) ||
(map[i].br_startblock != DELAYSTARTBLOCK));
if (map[i].br_startblock == HOLESTARTBLOCK &&
whichfork == XFS_ATTR_FORK) {
/* came to the end of attribute fork */
- out.bmv_oflags |= BMV_OF_LAST;
- goto unlock_and_return;
- } else {
- int full = 0; /* user array is full */
-
- if (!xfs_getbmapx_fix_eof_hole(ip, &out,
- prealloced, bmvend,
- map[i].br_startblock)) {
- goto unlock_and_return;
- }
-
- /* format results & advance arg */
- error = formatter(&arg, &out, &full);
- if (error || full)
- goto unlock_and_return;
- nexleft--;
- bmv->bmv_offset =
- out.bmv_offset + out.bmv_length;
- bmv->bmv_length = MAX((__int64_t)0,
- (__int64_t)(bmvend - bmv->bmv_offset));
- bmv->bmv_entries++;
+ out[cur_ext].bmv_oflags |= BMV_OF_LAST;
+ goto out_free_map;
}
+
+ if (!xfs_getbmapx_fix_eof_hole(ip, &out[cur_ext],
+ prealloced, bmvend,
+ map[i].br_startblock))
+ goto out_free_map;
+
+ nexleft--;
+ bmv->bmv_offset =
+ out[cur_ext].bmv_offset +
+ out[cur_ext].bmv_length;
+ bmv->bmv_length =
+ max_t(__int64_t, 0, bmvend - bmv->bmv_offset);
+ bmv->bmv_entries++;
+ cur_ext++;
}
} while (nmap && nexleft && bmv->bmv_length);
-unlock_and_return:
+ out_free_map:
+ kmem_free(map);
+ out_unlock_ilock:
xfs_iunlock_map_shared(ip, lock);
+ out_unlock_iolock:
xfs_iunlock(ip, XFS_IOLOCK_SHARED);
- kmem_free(map);
+ for (i = 0; i < cur_ext; i++) {
+ int full = 0; /* user array is full */
+
+ /* format results & advance arg */
+ error = formatter(&arg, &out[i], &full);
+ if (error || full)
+ break;
+ }
return error;
}
diff --git a/fs/xfs/xfs_inode.c b/fs/xfs/xfs_inode.c
index e7ae08d1df4..123b20c8cbf 100644
--- a/fs/xfs/xfs_inode.c
+++ b/fs/xfs/xfs_inode.c
@@ -1258,8 +1258,10 @@ xfs_file_last_byte(
* necessary.
*/
if (ip->i_df.if_flags & XFS_IFEXTENTS) {
+ xfs_ilock(ip, XFS_ILOCK_SHARED);
error = xfs_bmap_last_offset(NULL, ip, &last_block,
XFS_DATA_FORK);
+ xfs_iunlock(ip, XFS_ILOCK_SHARED);
if (error) {
last_block = 0;
}
diff --git a/fs/xfs/xfs_mount.c b/fs/xfs/xfs_mount.c
index b101990df02..65a99725d0c 100644
--- a/fs/xfs/xfs_mount.c
+++ b/fs/xfs/xfs_mount.c
@@ -291,14 +291,17 @@ xfs_mount_validate_sb(
sbp->sb_sectsize > XFS_MAX_SECTORSIZE ||
sbp->sb_sectlog < XFS_MIN_SECTORSIZE_LOG ||
sbp->sb_sectlog > XFS_MAX_SECTORSIZE_LOG ||
+ sbp->sb_sectsize != (1 << sbp->sb_sectlog) ||
sbp->sb_blocksize < XFS_MIN_BLOCKSIZE ||
sbp->sb_blocksize > XFS_MAX_BLOCKSIZE ||
sbp->sb_blocklog < XFS_MIN_BLOCKSIZE_LOG ||
sbp->sb_blocklog > XFS_MAX_BLOCKSIZE_LOG ||
+ sbp->sb_blocksize != (1 << sbp->sb_blocklog) ||
sbp->sb_inodesize < XFS_DINODE_MIN_SIZE ||
sbp->sb_inodesize > XFS_DINODE_MAX_SIZE ||
sbp->sb_inodelog < XFS_DINODE_MIN_LOG ||
sbp->sb_inodelog > XFS_DINODE_MAX_LOG ||
+ sbp->sb_inodesize != (1 << sbp->sb_inodelog) ||
(sbp->sb_blocklog - sbp->sb_inodelog != sbp->sb_inopblog) ||
(sbp->sb_rextsize * sbp->sb_blocksize > XFS_MAX_RTEXTSIZE) ||
(sbp->sb_rextsize * sbp->sb_blocksize < XFS_MIN_RTEXTSIZE) ||
diff --git a/include/asm-generic/atomic.h b/include/asm-generic/atomic.h
index 7abdaa91ccd..3673a13b670 100644
--- a/include/asm-generic/atomic.h
+++ b/include/asm-generic/atomic.h
@@ -132,9 +132,9 @@ static inline long atomic_long_add_unless(atomic_long_t *l, long a, long u)
#define atomic_long_inc_not_zero(l) atomic64_inc_not_zero((atomic64_t *)(l))
#define atomic_long_cmpxchg(l, old, new) \
- (atomic_cmpxchg((atomic64_t *)(l), (old), (new)))
+ (atomic64_cmpxchg((atomic64_t *)(l), (old), (new)))
#define atomic_long_xchg(v, new) \
- (atomic_xchg((atomic64_t *)(l), (new)))
+ (atomic64_xchg((atomic64_t *)(l), (new)))
#else /* BITS_PER_LONG == 64 */
diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h
index e727fe0d145..4b6755984d2 100644
--- a/include/asm-generic/bug.h
+++ b/include/asm-generic/bug.h
@@ -58,12 +58,13 @@ struct bug_entry {
*/
#ifndef __WARN
#ifndef __ASSEMBLY__
-extern void warn_slowpath(const char *file, const int line,
+extern void warn_slowpath_fmt(const char *file, const int line,
const char *fmt, ...) __attribute__((format(printf, 3, 4)));
+extern void warn_slowpath_null(const char *file, const int line);
#define WANT_WARN_ON_SLOWPATH
#endif
-#define __WARN() warn_slowpath(__FILE__, __LINE__, NULL)
-#define __WARN_printf(arg...) warn_slowpath(__FILE__, __LINE__, arg)
+#define __WARN() warn_slowpath_null(__FILE__, __LINE__)
+#define __WARN_printf(arg...) warn_slowpath_fmt(__FILE__, __LINE__, arg)
#else
#define __WARN_printf(arg...) do { printk(arg); __WARN(); } while (0)
#endif
diff --git a/include/asm-generic/local.h b/include/asm-generic/local.h
index dbd6150763e..fc218444e31 100644
--- a/include/asm-generic/local.h
+++ b/include/asm-generic/local.h
@@ -42,7 +42,7 @@ typedef struct
#define local_cmpxchg(l, o, n) atomic_long_cmpxchg((&(l)->a), (o), (n))
#define local_xchg(l, n) atomic_long_xchg((&(l)->a), (n))
-#define local_add_unless(l, a, u) atomic_long_add_unless((&(l)->a), (a), (u))
+#define local_add_unless(l, _a, u) atomic_long_add_unless((&(l)->a), (_a), (u))
#define local_inc_not_zero(l) atomic_long_inc_not_zero(&(l)->a)
/* Non-atomic variants, ie. preemption disabled and won't be touched
diff --git a/include/drm/i915_drm.h b/include/drm/i915_drm.h
index 95962fa8398..8e1e92583fb 100644
--- a/include/drm/i915_drm.h
+++ b/include/drm/i915_drm.h
@@ -184,6 +184,7 @@ typedef struct _drm_i915_sarea {
#define DRM_I915_GEM_GET_TILING 0x22
#define DRM_I915_GEM_GET_APERTURE 0x23
#define DRM_I915_GEM_MMAP_GTT 0x24
+#define DRM_I915_GET_PIPE_FROM_CRTC_ID 0x25
#define DRM_IOCTL_I915_INIT DRM_IOW( DRM_COMMAND_BASE + DRM_I915_INIT, drm_i915_init_t)
#define DRM_IOCTL_I915_FLUSH DRM_IO ( DRM_COMMAND_BASE + DRM_I915_FLUSH)
@@ -219,6 +220,7 @@ typedef struct _drm_i915_sarea {
#define DRM_IOCTL_I915_GEM_SET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_SET_TILING, struct drm_i915_gem_set_tiling)
#define DRM_IOCTL_I915_GEM_GET_TILING DRM_IOWR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_TILING, struct drm_i915_gem_get_tiling)
#define DRM_IOCTL_I915_GEM_GET_APERTURE DRM_IOR (DRM_COMMAND_BASE + DRM_I915_GEM_GET_APERTURE, struct drm_i915_gem_get_aperture)
+#define DRM_IOCTL_I915_GET_PIPE_FROM_CRTC_ID DRM_IOWR(DRM_COMMAND_BASE + DRM_I915_GET_PIPE_FROM_CRTC_ID, struct drm_intel_get_pipe_from_crtc_id)
/* Allow drivers to submit batchbuffers directly to hardware, relying
* on the security mechanisms provided by hardware.
@@ -657,4 +659,12 @@ struct drm_i915_gem_get_aperture {
__u64 aper_available_size;
};
+struct drm_i915_get_pipe_from_crtc_id {
+ /** ID of CRTC being requested **/
+ __u32 crtc_id;
+
+ /** pipe of requested CRTC **/
+ __u32 pipe;
+};
+
#endif /* _I915_DRM_H_ */
diff --git a/include/linux/Kbuild b/include/linux/Kbuild
index ca9b9b9bd33..3f0eaa397ef 100644
--- a/include/linux/Kbuild
+++ b/include/linux/Kbuild
@@ -138,6 +138,7 @@ header-y += qnxtypes.h
header-y += radeonfb.h
header-y += raw.h
header-y += resource.h
+header-y += romfs_fs.h
header-y += rose.h
header-y += serial_reg.h
header-y += smbno.h
@@ -314,7 +315,6 @@ unifdef-y += irqnr.h
unifdef-y += reboot.h
unifdef-y += reiserfs_fs.h
unifdef-y += reiserfs_xattr.h
-unifdef-y += romfs_fs.h
unifdef-y += route.h
unifdef-y += rtc.h
unifdef-y += rtnetlink.h
diff --git a/include/linux/amba/bus.h b/include/linux/amba/bus.h
index 51e6e54b2aa..9b93cafa82a 100644
--- a/include/linux/amba/bus.h
+++ b/include/linux/amba/bus.h
@@ -28,7 +28,7 @@ struct amba_id {
struct amba_driver {
struct device_driver drv;
- int (*probe)(struct amba_device *, void *);
+ int (*probe)(struct amba_device *, struct amba_id *);
int (*remove)(struct amba_device *);
void (*shutdown)(struct amba_device *);
int (*suspend)(struct amba_device *, pm_message_t);
diff --git a/include/linux/ata.h b/include/linux/ata.h
index cb79b7a208e..915da43edee 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -730,6 +730,34 @@ static inline int ata_id_has_unload(const u16 *id)
return 0;
}
+static inline int ata_id_form_factor(const u16 *id)
+{
+ u16 val = id[168];
+
+ if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff)
+ return 0;
+
+ val &= 0xf;
+
+ if (val > 5)
+ return 0;
+
+ return val;
+}
+
+static inline int ata_id_rotation_rate(const u16 *id)
+{
+ u16 val = id[217];
+
+ if (ata_id_major_version(id) < 7 || val == 0 || val == 0xffff)
+ return 0;
+
+ if (val > 1 && val < 0x401)
+ return 0;
+
+ return val;
+}
+
static inline int ata_id_has_trim(const u16 *id)
{
if (ata_id_major_version(id) >= 7 &&
diff --git a/include/linux/binfmts.h b/include/linux/binfmts.h
index 6638b8148de..61ee18c1bdb 100644
--- a/include/linux/binfmts.h
+++ b/include/linux/binfmts.h
@@ -82,7 +82,19 @@ struct linux_binfmt {
int hasvdso;
};
-extern int register_binfmt(struct linux_binfmt *);
+extern int __register_binfmt(struct linux_binfmt *fmt, int insert);
+
+/* Registration of default binfmt handlers */
+static inline int register_binfmt(struct linux_binfmt *fmt)
+{
+ return __register_binfmt(fmt, 0);
+}
+/* Same as above, but adds a new binfmt at the top of the list */
+static inline int insert_binfmt(struct linux_binfmt *fmt)
+{
+ return __register_binfmt(fmt, 1);
+}
+
extern void unregister_binfmt(struct linux_binfmt *);
extern int prepare_binprm(struct linux_binprm *);
diff --git a/include/linux/blkdev.h b/include/linux/blkdev.h
index 2755d5c6da2..b4f71f1a4af 100644
--- a/include/linux/blkdev.h
+++ b/include/linux/blkdev.h
@@ -601,6 +601,7 @@ enum {
blk_failfast_driver(rq))
#define blk_rq_started(rq) ((rq)->cmd_flags & REQ_STARTED)
#define blk_rq_io_stat(rq) ((rq)->cmd_flags & REQ_IO_STAT)
+#define blk_rq_quiet(rq) ((rq)->cmd_flags & REQ_QUIET)
#define blk_account_rq(rq) (blk_rq_started(rq) && (blk_fs_request(rq) || blk_discard_rq(rq)))
diff --git a/include/linux/device.h b/include/linux/device.h
index 6a69caaac18..5d5c197bad4 100644
--- a/include/linux/device.h
+++ b/include/linux/device.h
@@ -384,13 +384,8 @@ struct device {
struct device_driver *driver; /* which driver has allocated this
device */
void *driver_data; /* data private to the driver */
-
- void *platform_data; /* We will remove platform_data
- field if all platform devices
- pass its platform specific data
- from platform_device->platform_data,
- other kind of devices should not
- use platform_data. */
+ void *platform_data; /* Platform specific data, device
+ core doesn't touch it */
struct dev_pm_info power;
#ifdef CONFIG_NUMA
diff --git a/include/linux/dmaengine.h b/include/linux/dmaengine.h
index 2e2aa3df170..ffefba81c81 100644
--- a/include/linux/dmaengine.h
+++ b/include/linux/dmaengine.h
@@ -78,12 +78,18 @@ enum dma_transaction_type {
* dependency chains
* @DMA_COMPL_SKIP_SRC_UNMAP - set to disable dma-unmapping the source buffer(s)
* @DMA_COMPL_SKIP_DEST_UNMAP - set to disable dma-unmapping the destination(s)
+ * @DMA_COMPL_SRC_UNMAP_SINGLE - set to do the source dma-unmapping as single
+ * (if not set, do the source dma-unmapping as page)
+ * @DMA_COMPL_DEST_UNMAP_SINGLE - set to do the destination dma-unmapping as single
+ * (if not set, do the destination dma-unmapping as page)
*/
enum dma_ctrl_flags {
DMA_PREP_INTERRUPT = (1 << 0),
DMA_CTRL_ACK = (1 << 1),
DMA_COMPL_SKIP_SRC_UNMAP = (1 << 2),
DMA_COMPL_SKIP_DEST_UNMAP = (1 << 3),
+ DMA_COMPL_SRC_UNMAP_SINGLE = (1 << 4),
+ DMA_COMPL_DEST_UNMAP_SINGLE = (1 << 5),
};
/**
diff --git a/include/linux/fs.h b/include/linux/fs.h
index 5bed436f435..3b534e527e0 100644
--- a/include/linux/fs.h
+++ b/include/linux/fs.h
@@ -1775,6 +1775,7 @@ void kill_block_super(struct super_block *sb);
void kill_anon_super(struct super_block *sb);
void kill_litter_super(struct super_block *sb);
void deactivate_super(struct super_block *sb);
+void deactivate_locked_super(struct super_block *sb);
int set_anon_super(struct super_block *s, void *data);
struct super_block *sget(struct file_system_type *type,
int (*test)(struct super_block *,void *),
@@ -2117,7 +2118,7 @@ extern struct file *create_write_pipe(int flags);
extern void free_write_pipe(struct file *);
extern struct file *do_filp_open(int dfd, const char *pathname,
- int open_flag, int mode);
+ int open_flag, int mode, int acc_mode);
extern int may_open(struct path *, int, int);
extern int kernel_read(struct file *, unsigned long, char *, unsigned long);
@@ -2367,6 +2368,7 @@ extern void file_update_time(struct file *file);
extern int generic_show_options(struct seq_file *m, struct vfsmount *mnt);
extern void save_mount_options(struct super_block *sb, char *options);
+extern void replace_mount_options(struct super_block *sb, char *options);
static inline ino_t parent_ino(struct dentry *dentry)
{
diff --git a/include/linux/ide.h b/include/linux/ide.h
index ff65fffb078..9fed365a598 100644
--- a/include/linux/ide.h
+++ b/include/linux/ide.h
@@ -1109,7 +1109,7 @@ void ide_fix_driveid(u16 *);
extern void ide_fixstring(u8 *, const int, const int);
-int ide_busy_sleep(ide_hwif_t *, unsigned long, int);
+int ide_busy_sleep(ide_drive_t *, unsigned long, int);
int ide_wait_stat(ide_startstop_t *, ide_drive_t *, u8, u8, unsigned long);
diff --git a/include/linux/input.h b/include/linux/input.h
index 6b28048fc56..0e6ff5de358 100644
--- a/include/linux/input.h
+++ b/include/linux/input.h
@@ -106,6 +106,7 @@ struct input_absinfo {
#define SYN_REPORT 0
#define SYN_CONFIG 1
+#define SYN_MT_REPORT 2
/*
* Keys and buttons
@@ -445,6 +446,7 @@ struct input_absinfo {
#define BTN_STYLUS2 0x14c
#define BTN_TOOL_DOUBLETAP 0x14d
#define BTN_TOOL_TRIPLETAP 0x14e
+#define BTN_TOOL_QUADTAP 0x14f /* Four fingers on trackpad */
#define BTN_WHEEL 0x150
#define BTN_GEAR_DOWN 0x150
@@ -644,6 +646,17 @@ struct input_absinfo {
#define ABS_TOOL_WIDTH 0x1c
#define ABS_VOLUME 0x20
#define ABS_MISC 0x28
+
+#define ABS_MT_TOUCH_MAJOR 0x30 /* Major axis of touching ellipse */
+#define ABS_MT_TOUCH_MINOR 0x31 /* Minor axis (omit if circular) */
+#define ABS_MT_WIDTH_MAJOR 0x32 /* Major axis of approaching ellipse */
+#define ABS_MT_WIDTH_MINOR 0x33 /* Minor axis (omit if circular) */
+#define ABS_MT_ORIENTATION 0x34 /* Ellipse orientation */
+#define ABS_MT_POSITION_X 0x35 /* Center X ellipse position */
+#define ABS_MT_POSITION_Y 0x36 /* Center Y ellipse position */
+#define ABS_MT_TOOL_TYPE 0x37 /* Type of touching device */
+#define ABS_MT_BLOB_ID 0x38 /* Group a set of packets as a blob */
+
#define ABS_MAX 0x3f
#define ABS_CNT (ABS_MAX+1)
@@ -743,6 +756,12 @@ struct input_absinfo {
#define BUS_ATARI 0x1B
/*
+ * MT_TOOL types
+ */
+#define MT_TOOL_FINGER 0
+#define MT_TOOL_PEN 1
+
+/*
* Values describing the status of a force-feedback effect
*/
#define FF_STATUS_STOPPED 0x00
@@ -1311,6 +1330,11 @@ static inline void input_sync(struct input_dev *dev)
input_event(dev, EV_SYN, SYN_REPORT, 0);
}
+static inline void input_mt_sync(struct input_dev *dev)
+{
+ input_event(dev, EV_SYN, SYN_MT_REPORT, 0);
+}
+
void input_set_capability(struct input_dev *dev, unsigned int type, unsigned int code);
static inline void input_set_abs_params(struct input_dev *dev, int axis, int min, int max, int fuzz, int flat)
diff --git a/include/linux/memcontrol.h b/include/linux/memcontrol.h
index a9e3b76aa88..25b9ca93d23 100644
--- a/include/linux/memcontrol.h
+++ b/include/linux/memcontrol.h
@@ -56,7 +56,7 @@ extern void mem_cgroup_move_lists(struct page *page,
enum lru_list from, enum lru_list to);
extern void mem_cgroup_uncharge_page(struct page *page);
extern void mem_cgroup_uncharge_cache_page(struct page *page);
-extern int mem_cgroup_shrink_usage(struct page *page,
+extern int mem_cgroup_shmem_charge_fallback(struct page *page,
struct mm_struct *mm, gfp_t gfp_mask);
extern unsigned long mem_cgroup_isolate_pages(unsigned long nr_to_scan,
@@ -155,7 +155,7 @@ static inline void mem_cgroup_uncharge_cache_page(struct page *page)
{
}
-static inline int mem_cgroup_shrink_usage(struct page *page,
+static inline int mem_cgroup_shmem_charge_fallback(struct page *page,
struct mm_struct *mm, gfp_t gfp_mask)
{
return 0;
diff --git a/include/linux/mman.h b/include/linux/mman.h
index 30d1073bac3..9872d6ca58a 100644
--- a/include/linux/mman.h
+++ b/include/linux/mman.h
@@ -12,21 +12,18 @@
#ifdef __KERNEL__
#include <linux/mm.h>
+#include <linux/percpu_counter.h>
#include <asm/atomic.h>
extern int sysctl_overcommit_memory;
extern int sysctl_overcommit_ratio;
-extern atomic_long_t vm_committed_space;
+extern struct percpu_counter vm_committed_as;
-#ifdef CONFIG_SMP
-extern void vm_acct_memory(long pages);
-#else
static inline void vm_acct_memory(long pages)
{
- atomic_long_add(pages, &vm_committed_space);
+ percpu_counter_add(&vm_committed_as, pages);
}
-#endif
static inline void vm_unacct_memory(long pages)
{
diff --git a/include/linux/mmzone.h b/include/linux/mmzone.h
index 186ec6ab334..a47c879e130 100644
--- a/include/linux/mmzone.h
+++ b/include/linux/mmzone.h
@@ -1097,6 +1097,32 @@ unsigned long __init node_memmap_size_bytes(int, unsigned long, unsigned long);
#define pfn_valid_within(pfn) (1)
#endif
+#ifdef CONFIG_ARCH_HAS_HOLES_MEMORYMODEL
+/*
+ * pfn_valid() is meant to be able to tell if a given PFN has valid memmap
+ * associated with it or not. In FLATMEM, it is expected that holes always
+ * have valid memmap as long as there is valid PFNs either side of the hole.
+ * In SPARSEMEM, it is assumed that a valid section has a memmap for the
+ * entire section.
+ *
+ * However, an ARM, and maybe other embedded architectures in the future
+ * free memmap backing holes to save memory on the assumption the memmap is
+ * never used. The page_zone linkages are then broken even though pfn_valid()
+ * returns true. A walker of the full memmap must then do this additional
+ * check to ensure the memmap they are looking at is sane by making sure
+ * the zone and PFN linkages are still valid. This is expensive, but walkers
+ * of the full memmap are extremely rare.
+ */
+int memmap_valid_within(unsigned long pfn,
+ struct page *page, struct zone *zone);
+#else
+static inline int memmap_valid_within(unsigned long pfn,
+ struct page *page, struct zone *zone)
+{
+ return 1;
+}
+#endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */
+
#endif /* !__GENERATING_BOUNDS.H */
#endif /* !__ASSEMBLY__ */
#endif /* _LINUX_MMZONE_H */
diff --git a/include/linux/namei.h b/include/linux/namei.h
index fc2e0357987..518098fe63a 100644
--- a/include/linux/namei.h
+++ b/include/linux/namei.h
@@ -69,7 +69,6 @@ extern int path_lookup(const char *, unsigned, struct nameidata *);
extern int vfs_path_lookup(struct dentry *, struct vfsmount *,
const char *, unsigned int, struct nameidata *);
-extern int path_lookup_open(int dfd, const char *name, unsigned lookup_flags, struct nameidata *, int open_flags);
extern struct file *lookup_instantiate_filp(struct nameidata *nd, struct dentry *dentry,
int (*open)(struct inode *, struct file *));
extern struct file *nameidata_to_filp(struct nameidata *nd, int flags);
diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h
index 1b2e43502ef..c9efe039dc5 100644
--- a/include/linux/netfilter/x_tables.h
+++ b/include/linux/netfilter/x_tables.h
@@ -472,7 +472,7 @@ static inline void xt_info_rdlock_bh(void)
local_bh_disable();
lock = &__get_cpu_var(xt_info_locks);
- if (!lock->readers++)
+ if (likely(!lock->readers++))
spin_lock(&lock->lock);
}
@@ -480,7 +480,7 @@ static inline void xt_info_rdunlock_bh(void)
{
struct xt_info_lock *lock = &__get_cpu_var(xt_info_locks);
- if (!--lock->readers)
+ if (likely(!--lock->readers))
spin_unlock(&lock->lock);
local_bh_enable();
}
diff --git a/include/linux/netfilter/xt_LED.h b/include/linux/netfilter/xt_LED.h
index 4c91a0d770d..f5509e7524d 100644
--- a/include/linux/netfilter/xt_LED.h
+++ b/include/linux/netfilter/xt_LED.h
@@ -1,6 +1,8 @@
#ifndef _XT_LED_H
#define _XT_LED_H
+#include <linux/types.h>
+
struct xt_led_info {
char id[27]; /* Unique ID for this trigger in the LED class */
__u8 always_blink; /* Blink even if the LED is already on */
diff --git a/include/linux/netfilter/xt_cluster.h b/include/linux/netfilter/xt_cluster.h
index 5e0a0d07b52..886682656f0 100644
--- a/include/linux/netfilter/xt_cluster.h
+++ b/include/linux/netfilter/xt_cluster.h
@@ -12,4 +12,6 @@ struct xt_cluster_match_info {
u_int32_t flags;
};
+#define XT_CLUSTER_NODES_MAX 32
+
#endif /* _XT_CLUSTER_MATCH_H */
diff --git a/include/linux/nls.h b/include/linux/nls.h
index 6a882208301..52b1a76c1b4 100644
--- a/include/linux/nls.h
+++ b/include/linux/nls.h
@@ -58,6 +58,25 @@ static inline int nls_strnicmp(struct nls_table *t, const unsigned char *s1,
return 0;
}
+/*
+ * nls_nullsize - return length of null character for codepage
+ * @codepage - codepage for which to return length of NULL terminator
+ *
+ * Since we can't guarantee that the null terminator will be a particular
+ * length, we have to check against the codepage. If there's a problem
+ * determining it, assume a single-byte NULL terminator.
+ */
+static inline int
+nls_nullsize(const struct nls_table *codepage)
+{
+ int charlen;
+ char tmp[NLS_MAX_CHARSET_SIZE];
+
+ charlen = codepage->uni2char(0, tmp, NLS_MAX_CHARSET_SIZE);
+
+ return charlen > 0 ? charlen : 1;
+}
+
#define MODULE_ALIAS_NLS(name) MODULE_ALIAS("nls_" __stringify(name))
#endif /* _LINUX_NLS_H */
diff --git a/include/linux/of_platform.h b/include/linux/of_platform.h
index 3d327b67d7e..90840665133 100644
--- a/include/linux/of_platform.h
+++ b/include/linux/of_platform.h
@@ -51,6 +51,16 @@ extern int of_register_driver(struct of_platform_driver *drv,
struct bus_type *bus);
extern void of_unregister_driver(struct of_platform_driver *drv);
+/* Platform drivers register/unregister */
+static inline int of_register_platform_driver(struct of_platform_driver *drv)
+{
+ return of_register_driver(drv, &of_platform_bus_type);
+}
+static inline void of_unregister_platform_driver(struct of_platform_driver *drv)
+{
+ of_unregister_driver(drv);
+}
+
#include <asm/of_platform.h>
extern struct of_device *of_find_device_by_node(struct device_node *np);
diff --git a/include/linux/pci_ids.h b/include/linux/pci_ids.h
index 06ba90c211a..0f71812d67d 100644
--- a/include/linux/pci_ids.h
+++ b/include/linux/pci_ids.h
@@ -1406,7 +1406,7 @@
#define PCI_DEVICE_ID_VIA_82C598_1 0x8598
#define PCI_DEVICE_ID_VIA_838X_1 0xB188
#define PCI_DEVICE_ID_VIA_83_87XX_1 0xB198
-#define PCI_DEVICE_ID_VIA_C409_IDE 0XC409
+#define PCI_DEVICE_ID_VIA_VX855_IDE 0xC409
#define PCI_DEVICE_ID_VIA_ANON 0xFFFF
#define PCI_VENDOR_ID_SIEMENS 0x110A
diff --git a/include/linux/platform_device.h b/include/linux/platform_device.h
index 72736fd8223..b67bb5d7b22 100644
--- a/include/linux/platform_device.h
+++ b/include/linux/platform_device.h
@@ -20,7 +20,6 @@ struct platform_device {
struct device dev;
u32 num_resources;
struct resource * resource;
- void *platform_data;
struct platform_device_id *id_entry;
};
diff --git a/include/linux/reiserfs_fs_sb.h b/include/linux/reiserfs_fs_sb.h
index 6b361d23a49..6473650c28f 100644
--- a/include/linux/reiserfs_fs_sb.h
+++ b/include/linux/reiserfs_fs_sb.h
@@ -402,7 +402,7 @@ struct reiserfs_sb_info {
int reserved_blocks; /* amount of blocks reserved for further allocations */
spinlock_t bitmap_lock; /* this lock on now only used to protect reserved_blocks variable */
struct dentry *priv_root; /* root of /.reiserfs_priv */
- struct dentry *xattr_root; /* root of /.reiserfs_priv/.xa */
+ struct dentry *xattr_root; /* root of /.reiserfs_priv/xattrs */
int j_errno;
#ifdef CONFIG_QUOTA
char *s_qf_names[MAXQUOTAS];
@@ -488,7 +488,6 @@ enum reiserfs_mount_options {
#define reiserfs_data_log(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_LOG))
#define reiserfs_data_ordered(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_ORDERED))
#define reiserfs_data_writeback(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_DATA_WRITEBACK))
-#define reiserfs_xattrs(s) ((s)->s_xattr != NULL)
#define reiserfs_xattrs_user(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_XATTRS_USER))
#define reiserfs_posixacl(s) (REISERFS_SB(s)->s_mount_opt & (1 << REISERFS_POSIXACL))
#define reiserfs_xattrs_optional(s) (reiserfs_xattrs_user(s) || reiserfs_posixacl(s))
diff --git a/include/linux/reiserfs_xattr.h b/include/linux/reiserfs_xattr.h
index dcae01e63e4..99928dce37e 100644
--- a/include/linux/reiserfs_xattr.h
+++ b/include/linux/reiserfs_xattr.h
@@ -38,8 +38,10 @@ struct nameidata;
int reiserfs_xattr_register_handlers(void) __init;
void reiserfs_xattr_unregister_handlers(void);
int reiserfs_xattr_init(struct super_block *sb, int mount_flags);
+int reiserfs_lookup_privroot(struct super_block *sb);
int reiserfs_delete_xattrs(struct inode *inode);
int reiserfs_chown_xattrs(struct inode *inode, struct iattr *attrs);
+int reiserfs_permission(struct inode *inode, int mask);
#ifdef CONFIG_REISERFS_FS_XATTR
#define has_xattr_dir(inode) (REISERFS_I(inode)->i_flags & i_has_xattr_dir)
@@ -49,7 +51,6 @@ int reiserfs_setxattr(struct dentry *dentry, const char *name,
const void *value, size_t size, int flags);
ssize_t reiserfs_listxattr(struct dentry *dentry, char *buffer, size_t size);
int reiserfs_removexattr(struct dentry *dentry, const char *name);
-int reiserfs_permission(struct inode *inode, int mask);
int reiserfs_xattr_get(struct inode *, const char *, void *, size_t);
int reiserfs_xattr_set(struct inode *, const char *, const void *, size_t, int);
@@ -97,7 +98,7 @@ static inline size_t reiserfs_xattr_jcreate_nblocks(struct inode *inode)
if ((REISERFS_I(inode)->i_flags & i_has_xattr_dir) == 0) {
nblocks += JOURNAL_BLOCKS_PER_OBJECT(inode->i_sb);
- if (REISERFS_SB(inode->i_sb)->xattr_root == NULL)
+ if (!REISERFS_SB(inode->i_sb)->xattr_root->d_inode)
nblocks += JOURNAL_BLOCKS_PER_OBJECT(inode->i_sb);
}
@@ -116,8 +117,6 @@ static inline void reiserfs_init_xattr_rwsem(struct inode *inode)
#define reiserfs_listxattr NULL
#define reiserfs_removexattr NULL
-#define reiserfs_permission NULL
-
static inline void reiserfs_init_xattr_rwsem(struct inode *inode)
{
}
diff --git a/include/linux/romfs_fs.h b/include/linux/romfs_fs.h
index e20bbf9eb36..c490fbc43fe 100644
--- a/include/linux/romfs_fs.h
+++ b/include/linux/romfs_fs.h
@@ -53,9 +53,4 @@ struct romfs_inode {
#define ROMFH_PAD (ROMFH_SIZE-1)
#define ROMFH_MASK (~ROMFH_PAD)
-#ifdef __KERNEL__
-
-/* Not much now */
-
-#endif /* __KERNEL__ */
#endif
diff --git a/include/linux/sunrpc/xprt.h b/include/linux/sunrpc/xprt.h
index 1758d9f5b5c..08afe43118f 100644
--- a/include/linux/sunrpc/xprt.h
+++ b/include/linux/sunrpc/xprt.h
@@ -261,6 +261,7 @@ void xprt_conditional_disconnect(struct rpc_xprt *xprt, unsigned int cookie);
#define XPRT_BINDING (5)
#define XPRT_CLOSING (6)
#define XPRT_CONNECTION_ABORT (7)
+#define XPRT_CONNECTION_CLOSE (8)
static inline void xprt_set_connected(struct rpc_xprt *xprt)
{
diff --git a/include/linux/syscalls.h b/include/linux/syscalls.h
index 40617c1d897..30520844b8d 100644
--- a/include/linux/syscalls.h
+++ b/include/linux/syscalls.h
@@ -433,6 +433,7 @@ asmlinkage long sys_fcntl(unsigned int fd, unsigned int cmd, unsigned long arg);
asmlinkage long sys_fcntl64(unsigned int fd,
unsigned int cmd, unsigned long arg);
#endif
+asmlinkage long sys_pipe2(int __user *fildes, int flags);
asmlinkage long sys_dup(unsigned int fildes);
asmlinkage long sys_dup2(unsigned int oldfd, unsigned int newfd);
asmlinkage long sys_dup3(unsigned int oldfd, unsigned int newfd, int flags);
diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h
index 3c86ed25a04..c24124a42ce 100644
--- a/include/linux/usb/cdc.h
+++ b/include/linux/usb/cdc.h
@@ -17,6 +17,7 @@
#define USB_CDC_SUBCLASS_DMM 0x09
#define USB_CDC_SUBCLASS_MDLM 0x0a
#define USB_CDC_SUBCLASS_OBEX 0x0b
+#define USB_CDC_SUBCLASS_EEM 0x0c
#define USB_CDC_PROTO_NONE 0
@@ -28,6 +29,8 @@
#define USB_CDC_ACM_PROTO_AT_CDMA 6
#define USB_CDC_ACM_PROTO_VENDOR 0xff
+#define USB_CDC_PROTO_EEM 7
+
/*-------------------------------------------------------------------------*/
/*
diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h
index 242348bb376..cec79adbe3e 100644
--- a/include/linux/virtio_net.h
+++ b/include/linux/virtio_net.h
@@ -4,6 +4,7 @@
* compatible drivers/servers. */
#include <linux/types.h>
#include <linux/virtio_config.h>
+#include <linux/if_ether.h>
/* The ID for virtio_net */
#define VIRTIO_ID_NET 1
diff --git a/include/linux/writeback.h b/include/linux/writeback.h
index 9c1ed1fb6dd..93445477f86 100644
--- a/include/linux/writeback.h
+++ b/include/linux/writeback.h
@@ -168,8 +168,6 @@ void writeback_set_ratelimit(void);
/* pdflush.c */
extern int nr_pdflush_threads; /* Global so it can be exported to sysctl
read-only. */
-extern int nr_pdflush_threads_max; /* Global so it can be exported to sysctl */
-extern int nr_pdflush_threads_min; /* Global so it can be exported to sysctl */
#endif /* WRITEBACK_H */
diff --git a/include/net/9p/client.h b/include/net/9p/client.h
index 4012e07162e..e26812274b7 100644
--- a/include/net/9p/client.h
+++ b/include/net/9p/client.h
@@ -98,7 +98,6 @@ enum p9_req_status_t {
struct p9_req_t {
int status;
int t_err;
- u16 flush_tag;
wait_queue_head_t *wq;
struct p9_fcall *tc;
struct p9_fcall *rc;
diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h
index be5bd713d2c..73aead222b3 100644
--- a/include/net/bluetooth/hci_core.h
+++ b/include/net/bluetooth/hci_core.h
@@ -457,6 +457,7 @@ int hci_recv_fragment(struct hci_dev *hdev, int type, void *data, int count);
int hci_register_sysfs(struct hci_dev *hdev);
void hci_unregister_sysfs(struct hci_dev *hdev);
+void hci_conn_init_sysfs(struct hci_conn *conn);
void hci_conn_add_sysfs(struct hci_conn *conn);
void hci_conn_del_sysfs(struct hci_conn *conn);
diff --git a/include/net/tcp.h b/include/net/tcp.h
index 1b94b9bfe2d..646dbe3962e 100644
--- a/include/net/tcp.h
+++ b/include/net/tcp.h
@@ -41,6 +41,7 @@
#include <net/ip.h>
#include <net/tcp_states.h>
#include <net/inet_ecn.h>
+#include <net/dst.h>
#include <linux/seq_file.h>
@@ -530,6 +531,17 @@ static inline void tcp_fast_path_check(struct sock *sk)
tcp_fast_path_on(tp);
}
+/* Compute the actual rto_min value */
+static inline u32 tcp_rto_min(struct sock *sk)
+{
+ struct dst_entry *dst = __sk_dst_get(sk);
+ u32 rto_min = TCP_RTO_MIN;
+
+ if (dst && dst_metric_locked(dst, RTAX_RTO_MIN))
+ rto_min = dst_metric_rtt(dst, RTAX_RTO_MIN);
+ return rto_min;
+}
+
/* Compute the actual receive window we are currently advertising.
* Rcv_nxt can be after the window if our peer push more data
* than the offered window.
@@ -895,7 +907,7 @@ static inline int tcp_prequeue(struct sock *sk, struct sk_buff *skb)
wake_up_interruptible(sk->sk_sleep);
if (!inet_csk_ack_scheduled(sk))
inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK,
- (3 * TCP_RTO_MIN) / 4,
+ (3 * tcp_rto_min(sk)) / 4,
TCP_RTO_MAX);
}
return 1;
diff --git a/include/scsi/fc/fc_fs.h b/include/scsi/fc/fc_fs.h
index 1b7af3a64c7..ac4cd38c860 100644
--- a/include/scsi/fc/fc_fs.h
+++ b/include/scsi/fc/fc_fs.h
@@ -149,6 +149,7 @@ enum fc_rctl {
* Well-known fabric addresses.
*/
enum fc_well_known_fid {
+ FC_FID_NONE = 0x000000, /* No destination */
FC_FID_BCAST = 0xffffff, /* broadcast */
FC_FID_FLOGI = 0xfffffe, /* fabric login */
FC_FID_FCTRL = 0xfffffd, /* fabric controller */
diff --git a/include/scsi/libfc.h b/include/scsi/libfc.h
index 0303a6a098c..45f9cc642c4 100644
--- a/include/scsi/libfc.h
+++ b/include/scsi/libfc.h
@@ -637,6 +637,7 @@ struct fc_disc {
enum fc_disc_event);
struct list_head rports;
+ struct list_head rogue_rports;
struct fc_lport *lport;
struct mutex disc_mutex;
struct fc_gpn_ft_resp partial_buf; /* partial name buffer */
diff --git a/include/scsi/libiscsi.h b/include/scsi/libiscsi.h
index 7ffaed2f94d..0289f5745fb 100644
--- a/include/scsi/libiscsi.h
+++ b/include/scsi/libiscsi.h
@@ -36,6 +36,7 @@ struct scsi_transport_template;
struct scsi_host_template;
struct scsi_device;
struct Scsi_Host;
+struct scsi_target;
struct scsi_cmnd;
struct socket;
struct iscsi_transport;
@@ -350,6 +351,7 @@ extern struct Scsi_Host *iscsi_host_alloc(struct scsi_host_template *sht,
bool xmit_can_sleep);
extern void iscsi_host_remove(struct Scsi_Host *shost);
extern void iscsi_host_free(struct Scsi_Host *shost);
+extern int iscsi_target_alloc(struct scsi_target *starget);
/*
* session management
diff --git a/include/scsi/osd_protocol.h b/include/scsi/osd_protocol.h
index cd3cbf76465..62b2ab8c69d 100644
--- a/include/scsi/osd_protocol.h
+++ b/include/scsi/osd_protocol.h
@@ -24,17 +24,18 @@ enum {
OSDv1_ADDITIONAL_CDB_LENGTH = 192,
OSDv1_TOTAL_CDB_LEN = OSDv1_ADDITIONAL_CDB_LENGTH + 8,
OSDv1_CAP_LEN = 80,
+
/* Latest supported version */
-/* OSD_ADDITIONAL_CDB_LENGTH = 216,*/
+ OSDv2_ADDITIONAL_CDB_LENGTH = 228,
OSD_ADDITIONAL_CDB_LENGTH =
- OSDv1_ADDITIONAL_CDB_LENGTH, /* FIXME: Pete rev-001 sup */
+ OSDv2_ADDITIONAL_CDB_LENGTH,
OSD_TOTAL_CDB_LEN = OSD_ADDITIONAL_CDB_LENGTH + 8,
-/* OSD_CAP_LEN = 104,*/
- OSD_CAP_LEN = OSDv1_CAP_LEN,/* FIXME: Pete rev-001 sup */
+ OSD_CAP_LEN = 104,
OSD_SYSTEMID_LEN = 20,
- OSD_CRYPTO_KEYID_SIZE = 20,
- /*FIXME: OSDv2_CRYPTO_KEYID_SIZE = 32,*/
+ OSDv1_CRYPTO_KEYID_SIZE = 20,
+ OSDv2_CRYPTO_KEYID_SIZE = 32,
+ OSD_CRYPTO_KEYID_SIZE = OSDv2_CRYPTO_KEYID_SIZE,
OSD_CRYPTO_SEED_SIZE = 4,
OSD_CRYPTO_NONCE_SIZE = 12,
OSD_MAX_SENSE_LEN = 252, /* from SPC-3 */
@@ -164,7 +165,11 @@ struct osd_cdb_head {
/* called allocation_length in some commands */
/*32*/ __be64 length;
/*40*/ __be64 start_address;
-/*48*/ __be32 list_identifier;/* Rarely used */
+ union {
+/*48*/ __be32 list_identifier;/* Rarely used */
+ /* OSD2r05 5.2.5 CDB continuation length */
+/*48*/ __be32 cdb_continuation_length;
+ };
} __packed v2;
};
/*52*/ union { /* selected attributes mode Page/List/Single */
@@ -204,29 +209,40 @@ struct osd_cdb_head {
/*80*/
/*160 v1*/
-/*184 v2*/
-struct osd_security_parameters {
-/*160*/u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
+struct osdv1_security_parameters {
+/*160*/u8 integrity_check_value[OSDv1_CRYPTO_KEYID_SIZE];
/*180*/u8 request_nonce[OSD_CRYPTO_NONCE_SIZE];
/*192*/osd_cdb_offset data_in_integrity_check_offset;
/*196*/osd_cdb_offset data_out_integrity_check_offset;
} __packed;
/*200 v1*/
-/*224 v2*/
-/* FIXME: osdv2_security_parameters */
+/*184 v2*/
+struct osdv2_security_parameters {
+/*184*/u8 integrity_check_value[OSDv2_CRYPTO_KEYID_SIZE];
+/*216*/u8 request_nonce[OSD_CRYPTO_NONCE_SIZE];
+/*228*/osd_cdb_offset data_in_integrity_check_offset;
+/*232*/osd_cdb_offset data_out_integrity_check_offset;
+} __packed;
+/*236 v2*/
+
+struct osd_security_parameters {
+ union {
+ struct osdv1_security_parameters v1;
+ struct osdv2_security_parameters v2;
+ };
+};
struct osdv1_cdb {
struct osd_cdb_head h;
u8 caps[OSDv1_CAP_LEN];
- struct osd_security_parameters sec_params;
+ struct osdv1_security_parameters sec_params;
} __packed;
struct osdv2_cdb {
struct osd_cdb_head h;
u8 caps[OSD_CAP_LEN];
- struct osd_security_parameters sec_params;
- /* FIXME: osdv2_security_parameters */
+ struct osdv2_security_parameters sec_params;
} __packed;
struct osd_cdb {
@@ -301,14 +317,25 @@ struct osd_attributes_list_attrid {
} __packed;
/*
+ * NOTE: v1: is not aligned.
+ */
+struct osdv1_attributes_list_element {
+ __be32 attr_page;
+ __be32 attr_id;
+ __be16 attr_bytes; /* valid bytes at attr_val without padding */
+ u8 attr_val[0];
+} __packed;
+
+/*
* osd2r03: 7.1.3.3 List entry format for retrieved attributes and
* for setting attributes
- * NOTE: v2 is 8-bytes aligned, v1 is not aligned.
+ * NOTE: v2 is 8-bytes aligned
*/
-struct osd_attributes_list_element {
+struct osdv2_attributes_list_element {
__be32 attr_page;
__be32 attr_id;
- __be16 attr_bytes;
+ u8 reserved[6];
+ __be16 attr_bytes; /* valid bytes at attr_val without padding */
u8 attr_val[0];
} __packed;
@@ -324,13 +351,13 @@ enum {
static inline unsigned osdv1_attr_list_elem_size(unsigned len)
{
- return ALIGN(len + sizeof(struct osd_attributes_list_element),
+ return ALIGN(len + sizeof(struct osdv1_attributes_list_element),
OSDv1_ATTRIBUTES_ELEM_ALIGN);
}
static inline unsigned osdv2_attr_list_elem_size(unsigned len)
{
- return ALIGN(len + sizeof(struct osd_attributes_list_element),
+ return ALIGN(len + sizeof(struct osdv2_attributes_list_element),
OSD_ATTRIBUTES_ELEM_ALIGN);
}
@@ -419,15 +446,35 @@ struct osd_data_out_integrity_info {
__be64 data_bytes;
__be64 set_attributes_bytes;
__be64 get_attributes_bytes;
- __be64 integrity_check_value;
+ __u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
} __packed;
+/* Same osd_data_out_integrity_info is used for OSD2/OSD1. The only difference
+ * Is the sizeof the structure since in OSD1 the last array is smaller. Use
+ * below for version independent handling of this structure
+ */
+static inline int osd_data_out_integrity_info_sizeof(bool is_ver1)
+{
+ return sizeof(struct osd_data_out_integrity_info) -
+ (is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE));
+}
+
struct osd_data_in_integrity_info {
__be64 data_bytes;
__be64 retrieved_attributes_bytes;
- __be64 integrity_check_value;
+ __u8 integrity_check_value[OSD_CRYPTO_KEYID_SIZE];
} __packed;
+/* Same osd_data_in_integrity_info is used for OSD2/OSD1. The only difference
+ * Is the sizeof the structure since in OSD1 the last array is smaller. Use
+ * below for version independent handling of this structure
+ */
+static inline int osd_data_in_integrity_info_sizeof(bool is_ver1)
+{
+ return sizeof(struct osd_data_in_integrity_info) -
+ (is_ver1 * (OSDv2_CRYPTO_KEYID_SIZE - OSDv1_CRYPTO_KEYID_SIZE));
+}
+
struct osd_timestamp {
u8 time[6]; /* number of milliseconds since 1/1/1970 UT (big endian) */
} __packed;
@@ -477,7 +524,7 @@ enum osd_capability_bit_masks {
OSD_SEC_CAP_NONE1 = BIT(8),
OSD_SEC_CAP_NONE2 = BIT(9),
- OSD_SEC_CAP_NONE3 = BIT(10),
+ OSD_SEC_GBL_REM = BIT(10), /*v2 only*/
OSD_SEC_CAP_QUERY = BIT(11), /*v2 only*/
OSD_SEC_CAP_M_OBJECT = BIT(12), /*v2 only*/
OSD_SEC_CAP_POL_SEC = BIT(13),
@@ -552,8 +599,7 @@ struct osdv1_capability {
struct osd_capability {
struct osd_capability_head h;
-/* struct osd_cap_object_descriptor od;*/
- struct osdv1_cap_object_descriptor od; /* FIXME: Pete rev-001 sup */
+ struct osd_cap_object_descriptor od;
} __packed;
/**
diff --git a/include/scsi/scsi_transport_fc.h b/include/scsi/scsi_transport_fc.h
index c9184f756ca..68a8d873bbd 100644
--- a/include/scsi/scsi_transport_fc.h
+++ b/include/scsi/scsi_transport_fc.h
@@ -680,7 +680,7 @@ fc_remote_port_chkready(struct fc_rport *rport)
if (rport->roles & FC_PORT_ROLE_FCP_TARGET)
result = 0;
else if (rport->flags & FC_RPORT_DEVLOSS_PENDING)
- result = DID_TRANSPORT_DISRUPTED << 16;
+ result = DID_IMM_RETRY << 16;
else
result = DID_NO_CONNECT << 16;
break;
@@ -688,7 +688,7 @@ fc_remote_port_chkready(struct fc_rport *rport)
if (rport->flags & FC_RPORT_FAST_FAIL_TIMEDOUT)
result = DID_TRANSPORT_FAILFAST << 16;
else
- result = DID_TRANSPORT_DISRUPTED << 16;
+ result = DID_IMM_RETRY << 16;
break;
default:
result = DID_NO_CONNECT << 16;
diff --git a/include/sound/version.h b/include/sound/version.h
index a7e74e23ad2..456f1359e1c 100644
--- a/include/sound/version.h
+++ b/include/sound/version.h
@@ -1,3 +1,3 @@
/* include/version.h */
-#define CONFIG_SND_VERSION "1.0.19"
+#define CONFIG_SND_VERSION "1.0.20"
#define CONFIG_SND_DATE ""
diff --git a/init/initramfs.c b/init/initramfs.c
index 9ee7b781041..4c00edc5968 100644
--- a/init/initramfs.c
+++ b/init/initramfs.c
@@ -574,11 +574,10 @@ static int __init populate_rootfs(void)
if (initrd_start) {
#ifdef CONFIG_BLK_DEV_RAM
int fd;
- printk(KERN_INFO "checking if image is initramfs...\n");
+ printk(KERN_INFO "Trying to unpack rootfs image as initramfs...\n");
err = unpack_to_rootfs((char *)initrd_start,
initrd_end - initrd_start);
if (!err) {
- printk(KERN_INFO "rootfs image is initramfs; unpacking...\n");
free_initrd();
return 0;
} else {
@@ -596,15 +595,11 @@ static int __init populate_rootfs(void)
free_initrd();
}
#else
- printk(KERN_INFO "Unpacking initramfs...");
+ printk(KERN_INFO "Unpacking initramfs...\n");
err = unpack_to_rootfs((char *)initrd_start,
initrd_end - initrd_start);
- if (err) {
- printk(" failed!\n");
- printk(KERN_EMERG "%s\n", err);
- } else {
- printk(" done\n");
- }
+ if (err)
+ printk(KERN_EMERG "Initramfs unpacking failed: %s\n", err);
free_initrd();
#endif
}
diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c
index a6fe71fd5d1..713098ee5a0 100644
--- a/kernel/auditfilter.c
+++ b/kernel/auditfilter.c
@@ -1028,7 +1028,7 @@ static void audit_update_watch(struct audit_parent *parent,
if (audit_enabled) {
struct audit_buffer *ab;
- ab = audit_log_start(NULL, GFP_KERNEL,
+ ab = audit_log_start(NULL, GFP_NOFS,
AUDIT_CONFIG_CHANGE);
audit_log_format(ab, "auid=%u ses=%u",
audit_get_loginuid(current),
@@ -1067,7 +1067,7 @@ static void audit_remove_parent_watches(struct audit_parent *parent)
e = container_of(r, struct audit_entry, rule);
if (audit_enabled) {
struct audit_buffer *ab;
- ab = audit_log_start(NULL, GFP_KERNEL,
+ ab = audit_log_start(NULL, GFP_NOFS,
AUDIT_CONFIG_CHANGE);
audit_log_format(ab, "auid=%u ses=%u",
audit_get_loginuid(current),
diff --git a/kernel/cgroup.c b/kernel/cgroup.c
index 382109b5bae..a7267bfd376 100644
--- a/kernel/cgroup.c
+++ b/kernel/cgroup.c
@@ -1133,8 +1133,7 @@ static int cgroup_get_sb(struct file_system_type *fs_type,
free_cg_links:
free_cg_links(&tmp_cg_links);
drop_new_super:
- up_write(&sb->s_umount);
- deactivate_super(sb);
+ deactivate_locked_super(sb);
return ret;
}
diff --git a/kernel/futex.c b/kernel/futex.c
index eef8cd26b5e..d546b2d53a6 100644
--- a/kernel/futex.c
+++ b/kernel/futex.c
@@ -193,6 +193,7 @@ static void drop_futex_key_refs(union futex_key *key)
* @uaddr: virtual address of the futex
* @fshared: 0 for a PROCESS_PRIVATE futex, 1 for PROCESS_SHARED
* @key: address where result is stored.
+ * @rw: mapping needs to be read/write (values: VERIFY_READ, VERIFY_WRITE)
*
* Returns a negative error code or 0
* The key words are stored in *key on success.
@@ -203,7 +204,8 @@ static void drop_futex_key_refs(union futex_key *key)
*
* lock_page() might sleep, the caller should not hold a spinlock.
*/
-static int get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key)
+static int
+get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key, int rw)
{
unsigned long address = (unsigned long)uaddr;
struct mm_struct *mm = current->mm;
@@ -226,7 +228,7 @@ static int get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key)
* but access_ok() should be faster than find_vma()
*/
if (!fshared) {
- if (unlikely(!access_ok(VERIFY_WRITE, uaddr, sizeof(u32))))
+ if (unlikely(!access_ok(rw, uaddr, sizeof(u32))))
return -EFAULT;
key->private.mm = mm;
key->private.address = address;
@@ -235,7 +237,7 @@ static int get_futex_key(u32 __user *uaddr, int fshared, union futex_key *key)
}
again:
- err = get_user_pages_fast(address, 1, 0, &page);
+ err = get_user_pages_fast(address, 1, rw == VERIFY_WRITE, &page);
if (err < 0)
return err;
@@ -677,7 +679,7 @@ static int futex_wake(u32 __user *uaddr, int fshared, int nr_wake, u32 bitset)
if (!bitset)
return -EINVAL;
- ret = get_futex_key(uaddr, fshared, &key);
+ ret = get_futex_key(uaddr, fshared, &key, VERIFY_READ);
if (unlikely(ret != 0))
goto out;
@@ -723,10 +725,10 @@ futex_wake_op(u32 __user *uaddr1, int fshared, u32 __user *uaddr2,
int ret, op_ret;
retry:
- ret = get_futex_key(uaddr1, fshared, &key1);
+ ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ);
if (unlikely(ret != 0))
goto out;
- ret = get_futex_key(uaddr2, fshared, &key2);
+ ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_WRITE);
if (unlikely(ret != 0))
goto out_put_key1;
@@ -814,10 +816,10 @@ static int futex_requeue(u32 __user *uaddr1, int fshared, u32 __user *uaddr2,
int ret, drop_count = 0;
retry:
- ret = get_futex_key(uaddr1, fshared, &key1);
+ ret = get_futex_key(uaddr1, fshared, &key1, VERIFY_READ);
if (unlikely(ret != 0))
goto out;
- ret = get_futex_key(uaddr2, fshared, &key2);
+ ret = get_futex_key(uaddr2, fshared, &key2, VERIFY_READ);
if (unlikely(ret != 0))
goto out_put_key1;
@@ -1140,7 +1142,7 @@ static int futex_wait(u32 __user *uaddr, int fshared,
q.bitset = bitset;
retry:
q.key = FUTEX_KEY_INIT;
- ret = get_futex_key(uaddr, fshared, &q.key);
+ ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_READ);
if (unlikely(ret != 0))
goto out;
@@ -1330,7 +1332,7 @@ static int futex_lock_pi(u32 __user *uaddr, int fshared,
q.pi_state = NULL;
retry:
q.key = FUTEX_KEY_INIT;
- ret = get_futex_key(uaddr, fshared, &q.key);
+ ret = get_futex_key(uaddr, fshared, &q.key, VERIFY_WRITE);
if (unlikely(ret != 0))
goto out;
@@ -1594,7 +1596,7 @@ retry:
if ((uval & FUTEX_TID_MASK) != task_pid_vnr(current))
return -EPERM;
- ret = get_futex_key(uaddr, fshared, &key);
+ ret = get_futex_key(uaddr, fshared, &key, VERIFY_WRITE);
if (unlikely(ret != 0))
goto out;
diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c
index d82142be8dd..26e08754744 100644
--- a/kernel/irq/handle.c
+++ b/kernel/irq/handle.c
@@ -363,8 +363,6 @@ irqreturn_t handle_IRQ_event(unsigned int irq, struct irqaction *action)
irqreturn_t ret, retval = IRQ_NONE;
unsigned int status = 0;
- WARN_ONCE(!in_irq(), "BUG: IRQ handler called from non-hardirq context!");
-
if (!(action->flags & IRQF_DISABLED))
local_irq_enable_in_hardirq();
diff --git a/kernel/kgdb.c b/kernel/kgdb.c
index e4dcfb2272a..9147a3190c9 100644
--- a/kernel/kgdb.c
+++ b/kernel/kgdb.c
@@ -1583,8 +1583,8 @@ static void sysrq_handle_gdb(int key, struct tty_struct *tty)
static struct sysrq_key_op sysrq_gdb_op = {
.handler = sysrq_handle_gdb,
- .help_msg = "Gdb",
- .action_msg = "GDB",
+ .help_msg = "debug(G)",
+ .action_msg = "DEBUG",
};
#endif
diff --git a/kernel/kprobes.c b/kernel/kprobes.c
index a5e74ddee0e..c0fa54b276d 100644
--- a/kernel/kprobes.c
+++ b/kernel/kprobes.c
@@ -319,6 +319,22 @@ struct kprobe __kprobes *get_kprobe(void *addr)
return NULL;
}
+/* Arm a kprobe with text_mutex */
+static void __kprobes arm_kprobe(struct kprobe *kp)
+{
+ mutex_lock(&text_mutex);
+ arch_arm_kprobe(kp);
+ mutex_unlock(&text_mutex);
+}
+
+/* Disarm a kprobe with text_mutex */
+static void __kprobes disarm_kprobe(struct kprobe *kp)
+{
+ mutex_lock(&text_mutex);
+ arch_disarm_kprobe(kp);
+ mutex_unlock(&text_mutex);
+}
+
/*
* Aggregate handlers for multiple kprobes support - these handlers
* take care of invoking the individual kprobe handlers on p->list
@@ -538,7 +554,7 @@ static int __kprobes add_new_kprobe(struct kprobe *ap, struct kprobe *p)
ap->flags &= ~KPROBE_FLAG_DISABLED;
if (!kprobes_all_disarmed)
/* Arm the breakpoint again. */
- arch_arm_kprobe(ap);
+ arm_kprobe(ap);
}
return 0;
}
@@ -789,11 +805,8 @@ static int __kprobes __unregister_kprobe_top(struct kprobe *p)
* enabled and not gone - otherwise, the breakpoint would
* already have been removed. We save on flushing icache.
*/
- if (!kprobes_all_disarmed && !kprobe_disabled(old_p)) {
- mutex_lock(&text_mutex);
- arch_disarm_kprobe(p);
- mutex_unlock(&text_mutex);
- }
+ if (!kprobes_all_disarmed && !kprobe_disabled(old_p))
+ disarm_kprobe(p);
hlist_del_rcu(&old_p->hlist);
} else {
if (p->break_handler && !kprobe_gone(p))
@@ -810,7 +823,7 @@ noclean:
if (!kprobe_disabled(old_p)) {
try_to_disable_aggr_kprobe(old_p);
if (!kprobes_all_disarmed && kprobe_disabled(old_p))
- arch_disarm_kprobe(old_p);
+ disarm_kprobe(old_p);
}
}
return 0;
@@ -1364,7 +1377,7 @@ int __kprobes disable_kprobe(struct kprobe *kp)
try_to_disable_aggr_kprobe(p);
if (!kprobes_all_disarmed && kprobe_disabled(p))
- arch_disarm_kprobe(p);
+ disarm_kprobe(p);
out:
mutex_unlock(&kprobe_mutex);
return ret;
@@ -1393,7 +1406,7 @@ int __kprobes enable_kprobe(struct kprobe *kp)
}
if (!kprobes_all_disarmed && kprobe_disabled(p))
- arch_arm_kprobe(p);
+ arm_kprobe(p);
p->flags &= ~KPROBE_FLAG_DISABLED;
if (p != kp)
diff --git a/kernel/lockdep_internals.h b/kernel/lockdep_internals.h
index a2cc7e9a6e8..699a2ac3a0d 100644
--- a/kernel/lockdep_internals.h
+++ b/kernel/lockdep_internals.h
@@ -54,9 +54,9 @@ enum {
* table (if it's not there yet), and we check it for lock order
* conflicts and deadlocks.
*/
-#define MAX_LOCKDEP_ENTRIES 8192UL
+#define MAX_LOCKDEP_ENTRIES 16384UL
-#define MAX_LOCKDEP_CHAINS_BITS 14
+#define MAX_LOCKDEP_CHAINS_BITS 15
#define MAX_LOCKDEP_CHAINS (1UL << MAX_LOCKDEP_CHAINS_BITS)
#define MAX_LOCKDEP_CHAIN_HLOCKS (MAX_LOCKDEP_CHAINS*5)
diff --git a/kernel/panic.c b/kernel/panic.c
index 3dcaa166135..984b3ecbd72 100644
--- a/kernel/panic.c
+++ b/kernel/panic.c
@@ -340,34 +340,46 @@ void oops_exit(void)
}
#ifdef WANT_WARN_ON_SLOWPATH
-void warn_slowpath(const char *file, int line, const char *fmt, ...)
-{
+struct slowpath_args {
+ const char *fmt;
va_list args;
- char function[KSYM_SYMBOL_LEN];
- unsigned long caller = (unsigned long)__builtin_return_address(0);
- const char *board;
+};
- sprint_symbol(function, caller);
+static void warn_slowpath_common(const char *file, int line, void *caller, struct slowpath_args *args)
+{
+ const char *board;
printk(KERN_WARNING "------------[ cut here ]------------\n");
- printk(KERN_WARNING "WARNING: at %s:%d %s()\n", file,
- line, function);
+ printk(KERN_WARNING "WARNING: at %s:%d %pS()\n", file, line, caller);
board = dmi_get_system_info(DMI_PRODUCT_NAME);
if (board)
printk(KERN_WARNING "Hardware name: %s\n", board);
- if (fmt) {
- va_start(args, fmt);
- vprintk(fmt, args);
- va_end(args);
- }
+ if (args)
+ vprintk(args->fmt, args->args);
print_modules();
dump_stack();
print_oops_end_marker();
add_taint(TAINT_WARN);
}
-EXPORT_SYMBOL(warn_slowpath);
+
+void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...)
+{
+ struct slowpath_args args;
+
+ args.fmt = fmt;
+ va_start(args.args, fmt);
+ warn_slowpath_common(file, line, __builtin_return_address(0), &args);
+ va_end(args.args);
+}
+EXPORT_SYMBOL(warn_slowpath_fmt);
+
+void warn_slowpath_null(const char *file, int line)
+{
+ warn_slowpath_common(file, line, __builtin_return_address(0), NULL);
+}
+EXPORT_SYMBOL(warn_slowpath_null);
#endif
#ifdef CONFIG_CC_STACKPROTECTOR
diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c
index c9dcf98b446..bece7c0b67b 100644
--- a/kernel/posix-cpu-timers.c
+++ b/kernel/posix-cpu-timers.c
@@ -1420,19 +1420,19 @@ void run_posix_cpu_timers(struct task_struct *tsk)
* timer call will interfere.
*/
list_for_each_entry_safe(timer, next, &firing, it.cpu.entry) {
- int firing;
+ int cpu_firing;
+
spin_lock(&timer->it_lock);
list_del_init(&timer->it.cpu.entry);
- firing = timer->it.cpu.firing;
+ cpu_firing = timer->it.cpu.firing;
timer->it.cpu.firing = 0;
/*
* The firing flag is -1 if we collided with a reset
* of the timer, which already reported this
* almost-firing as an overrun. So don't generate an event.
*/
- if (likely(firing >= 0)) {
+ if (likely(cpu_firing >= 0))
cpu_timer_fire(timer);
- }
spin_unlock(&timer->it_lock);
}
}
diff --git a/kernel/power/disk.c b/kernel/power/disk.c
index e71ca9cd81b..b0dc9e7a0d1 100644
--- a/kernel/power/disk.c
+++ b/kernel/power/disk.c
@@ -241,9 +241,9 @@ static int create_image(int platform_mode)
local_irq_disable();
- sysdev_suspend(PMSG_FREEZE);
+ error = sysdev_suspend(PMSG_FREEZE);
if (error) {
- printk(KERN_ERR "PM: Some devices failed to power down, "
+ printk(KERN_ERR "PM: Some system devices failed to power down, "
"aborting hibernation\n");
goto Enable_irqs;
}
diff --git a/kernel/sched.c b/kernel/sched.c
index b902e587a3a..26efa475bdc 100644
--- a/kernel/sched.c
+++ b/kernel/sched.c
@@ -4732,7 +4732,7 @@ void account_process_tick(struct task_struct *p, int user_tick)
if (user_tick)
account_user_time(p, one_jiffy, one_jiffy_scaled);
- else if (p != rq->idle)
+ else if ((p != rq->idle) || (irq_count() != HARDIRQ_OFFSET))
account_system_time(p, HARDIRQ_OFFSET, one_jiffy,
one_jiffy_scaled);
else
diff --git a/kernel/sched_clock.c b/kernel/sched_clock.c
index 819f17ac796..e1d16c9a768 100644
--- a/kernel/sched_clock.c
+++ b/kernel/sched_clock.c
@@ -38,7 +38,8 @@
*/
unsigned long long __attribute__((weak)) sched_clock(void)
{
- return (unsigned long long)jiffies * (NSEC_PER_SEC / HZ);
+ return (unsigned long long)(jiffies - INITIAL_JIFFIES)
+ * (NSEC_PER_SEC / HZ);
}
static __read_mostly int sched_clock_running;
diff --git a/kernel/sysctl.c b/kernel/sysctl.c
index e3d2c7dd59b..b2970d56fb7 100644
--- a/kernel/sysctl.c
+++ b/kernel/sysctl.c
@@ -101,7 +101,9 @@ static int __maybe_unused one = 1;
static int __maybe_unused two = 2;
static unsigned long one_ul = 1;
static int one_hundred = 100;
-static int one_thousand = 1000;
+
+/* this is needed for the proc_doulongvec_minmax of vm_dirty_bytes */
+static unsigned long dirty_bytes_min = 2 * PAGE_SIZE;
/* this is needed for the proc_dointvec_minmax for [fs_]overflow UID and GID */
static int maxolduid = 65535;
@@ -1006,7 +1008,7 @@ static struct ctl_table vm_table[] = {
.mode = 0644,
.proc_handler = &dirty_bytes_handler,
.strategy = &sysctl_intvec,
- .extra1 = &one_ul,
+ .extra1 = &dirty_bytes_min,
},
{
.procname = "dirty_writeback_centisecs",
@@ -1031,28 +1033,6 @@ static struct ctl_table vm_table[] = {
.proc_handler = &proc_dointvec,
},
{
- .ctl_name = CTL_UNNUMBERED,
- .procname = "nr_pdflush_threads_min",
- .data = &nr_pdflush_threads_min,
- .maxlen = sizeof nr_pdflush_threads_min,
- .mode = 0644 /* read-write */,
- .proc_handler = &proc_dointvec_minmax,
- .strategy = &sysctl_intvec,
- .extra1 = &one,
- .extra2 = &nr_pdflush_threads_max,
- },
- {
- .ctl_name = CTL_UNNUMBERED,
- .procname = "nr_pdflush_threads_max",
- .data = &nr_pdflush_threads_max,
- .maxlen = sizeof nr_pdflush_threads_max,
- .mode = 0644 /* read-write */,
- .proc_handler = &proc_dointvec_minmax,
- .strategy = &sysctl_intvec,
- .extra1 = &nr_pdflush_threads_min,
- .extra2 = &one_thousand,
- },
- {
.ctl_name = VM_SWAPPINESS,
.procname = "swappiness",
.data = &vm_swappiness,
diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c
index 21a5ca84951..83c4417b6a3 100644
--- a/kernel/time/tick-common.c
+++ b/kernel/time/tick-common.c
@@ -93,7 +93,17 @@ void tick_handle_periodic(struct clock_event_device *dev)
for (;;) {
if (!clockevents_program_event(dev, next, ktime_get()))
return;
- tick_periodic(cpu);
+ /*
+ * Have to be careful here. If we're in oneshot mode,
+ * before we call tick_periodic() in a loop, we need
+ * to be sure we're using a real hardware clocksource.
+ * Otherwise we could get trapped in an infinite
+ * loop, as the tick_periodic() increments jiffies,
+ * when then will increment time, posibly causing
+ * the loop to trigger again and again.
+ */
+ if (timekeeping_valid_for_hres())
+ tick_periodic(cpu);
next = ktime_add(next, tick_period);
}
}
diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c
index 1ce5dc6372b..cda81ec58d9 100644
--- a/kernel/trace/trace.c
+++ b/kernel/trace/trace.c
@@ -2380,7 +2380,7 @@ static const char readme_msg[] =
"# echo print-parent > /debug/tracing/trace_options\n"
"# echo 1 > /debug/tracing/tracing_enabled\n"
"# cat /debug/tracing/trace > /tmp/trace.txt\n"
- "echo 0 > /debug/tracing/tracing_enabled\n"
+ "# echo 0 > /debug/tracing/tracing_enabled\n"
;
static ssize_t
@@ -3448,6 +3448,7 @@ tracing_buffers_splice_read(struct file *file, loff_t *ppos,
if (!ref)
break;
+ ref->ref = 1;
ref->buffer = info->tr->buffer;
ref->page = ring_buffer_alloc_read_page(ref->buffer);
if (!ref->page) {
diff --git a/lib/Kconfig.debug b/lib/Kconfig.debug
index 812c28207ba..6cdcf38f2da 100644
--- a/lib/Kconfig.debug
+++ b/lib/Kconfig.debug
@@ -891,7 +891,6 @@ config DYNAMIC_DEBUG
default n
depends on PRINTK
depends on DEBUG_FS
- select PRINTK_DEBUG
help
Compiles debug level messages into the kernel, which would not
diff --git a/lib/dma-debug.c b/lib/dma-debug.c
index d3da7edc034..69da09a085a 100644
--- a/lib/dma-debug.c
+++ b/lib/dma-debug.c
@@ -400,60 +400,9 @@ out_err:
return -ENOMEM;
}
-static int device_dma_allocations(struct device *dev)
-{
- struct dma_debug_entry *entry;
- unsigned long flags;
- int count = 0, i;
-
- for (i = 0; i < HASH_SIZE; ++i) {
- spin_lock_irqsave(&dma_entry_hash[i].lock, flags);
- list_for_each_entry(entry, &dma_entry_hash[i].list, list) {
- if (entry->dev == dev)
- count += 1;
- }
- spin_unlock_irqrestore(&dma_entry_hash[i].lock, flags);
- }
-
- return count;
-}
-
-static int dma_debug_device_change(struct notifier_block *nb,
- unsigned long action, void *data)
-{
- struct device *dev = data;
- int count;
-
-
- switch (action) {
- case BUS_NOTIFY_UNBIND_DRIVER:
- count = device_dma_allocations(dev);
- if (count == 0)
- break;
- err_printk(dev, NULL, "DMA-API: device driver has pending "
- "DMA allocations while released from device "
- "[count=%d]\n", count);
- break;
- default:
- break;
- }
-
- return 0;
-}
-
void dma_debug_add_bus(struct bus_type *bus)
{
- struct notifier_block *nb;
-
- nb = kzalloc(sizeof(struct notifier_block), GFP_KERNEL);
- if (nb == NULL) {
- printk(KERN_ERR "dma_debug_add_bus: out of memory\n");
- return;
- }
-
- nb->notifier_call = dma_debug_device_change;
-
- bus_register_notifier(bus, nb);
+ /* FIXME: register notifier */
}
/*
diff --git a/mm/Kconfig b/mm/Kconfig
index 57971d2ab84..c2b57d81e15 100644
--- a/mm/Kconfig
+++ b/mm/Kconfig
@@ -225,3 +225,31 @@ config HAVE_MLOCKED_PAGE_BIT
config MMU_NOTIFIER
bool
+
+config NOMMU_INITIAL_TRIM_EXCESS
+ int "Turn on mmap() excess space trimming before booting"
+ depends on !MMU
+ default 1
+ help
+ The NOMMU mmap() frequently needs to allocate large contiguous chunks
+ of memory on which to store mappings, but it can only ask the system
+ allocator for chunks in 2^N*PAGE_SIZE amounts - which is frequently
+ more than it requires. To deal with this, mmap() is able to trim off
+ the excess and return it to the allocator.
+
+ If trimming is enabled, the excess is trimmed off and returned to the
+ system allocator, which can cause extra fragmentation, particularly
+ if there are a lot of transient processes.
+
+ If trimming is disabled, the excess is kept, but not used, which for
+ long-term mappings means that the space is wasted.
+
+ Trimming can be dynamically controlled through a sysctl option
+ (/proc/sys/vm/nr_trim_pages) which specifies the minimum number of
+ excess pages there must be before trimming should occur, or zero if
+ no trimming is to occur.
+
+ This option specifies the initial value of this option. The default
+ of 1 says that all excess pages should be trimmed.
+
+ See Documentation/nommu-mmap.txt for more information.
diff --git a/mm/memcontrol.c b/mm/memcontrol.c
index e44fb0fbb80..01c2d8f1468 100644
--- a/mm/memcontrol.c
+++ b/mm/memcontrol.c
@@ -1024,9 +1024,7 @@ static struct mem_cgroup *try_get_mem_cgroup_from_swapcache(struct page *page)
return NULL;
pc = lookup_page_cgroup(page);
- /*
- * Used bit of swapcache is solid under page lock.
- */
+ lock_page_cgroup(pc);
if (PageCgroupUsed(pc)) {
mem = pc->mem_cgroup;
if (mem && !css_tryget(&mem->css))
@@ -1040,6 +1038,7 @@ static struct mem_cgroup *try_get_mem_cgroup_from_swapcache(struct page *page)
mem = NULL;
rcu_read_unlock();
}
+ unlock_page_cgroup(pc);
return mem;
}
@@ -1618,37 +1617,28 @@ void mem_cgroup_end_migration(struct mem_cgroup *mem,
}
/*
- * A call to try to shrink memory usage under specified resource controller.
- * This is typically used for page reclaiming for shmem for reducing side
- * effect of page allocation from shmem, which is used by some mem_cgroup.
+ * A call to try to shrink memory usage on charge failure at shmem's swapin.
+ * Calling hierarchical_reclaim is not enough because we should update
+ * last_oom_jiffies to prevent pagefault_out_of_memory from invoking global OOM.
+ * Moreover considering hierarchy, we should reclaim from the mem_over_limit,
+ * not from the memcg which this page would be charged to.
+ * try_charge_swapin does all of these works properly.
*/
-int mem_cgroup_shrink_usage(struct page *page,
+int mem_cgroup_shmem_charge_fallback(struct page *page,
struct mm_struct *mm,
gfp_t gfp_mask)
{
struct mem_cgroup *mem = NULL;
- int progress = 0;
- int retry = MEM_CGROUP_RECLAIM_RETRIES;
+ int ret;
if (mem_cgroup_disabled())
return 0;
- if (page)
- mem = try_get_mem_cgroup_from_swapcache(page);
- if (!mem && mm)
- mem = try_get_mem_cgroup_from_mm(mm);
- if (unlikely(!mem))
- return 0;
- do {
- progress = mem_cgroup_hierarchical_reclaim(mem,
- gfp_mask, true, false);
- progress += mem_cgroup_check_under_limit(mem);
- } while (!progress && --retry);
+ ret = mem_cgroup_try_charge_swapin(mm, page, gfp_mask, &mem);
+ if (!ret)
+ mem_cgroup_cancel_charge_swapin(mem); /* it does !mem check */
- css_put(&mem->css);
- if (!retry)
- return -ENOMEM;
- return 0;
+ return ret;
}
static DEFINE_MUTEX(set_limit_mutex);
diff --git a/mm/memory.c b/mm/memory.c
index cf6873e91c6..4126dd16778 100644
--- a/mm/memory.c
+++ b/mm/memory.c
@@ -1971,6 +1971,15 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma,
ret = tmp;
goto unwritable_page;
}
+ if (unlikely(!(tmp & VM_FAULT_LOCKED))) {
+ lock_page(old_page);
+ if (!old_page->mapping) {
+ ret = 0; /* retry the fault */
+ unlock_page(old_page);
+ goto unwritable_page;
+ }
+ } else
+ VM_BUG_ON(!PageLocked(old_page));
/*
* Since we dropped the lock we need to revalidate
@@ -1980,9 +1989,11 @@ static int do_wp_page(struct mm_struct *mm, struct vm_area_struct *vma,
*/
page_table = pte_offset_map_lock(mm, pmd, address,
&ptl);
- page_cache_release(old_page);
- if (!pte_same(*page_table, orig_pte))
+ if (!pte_same(*page_table, orig_pte)) {
+ unlock_page(old_page);
+ page_cache_release(old_page);
goto unlock;
+ }
page_mkwrite = 1;
}
@@ -2094,9 +2105,6 @@ gotten:
unlock:
pte_unmap_unlock(page_table, ptl);
if (dirty_page) {
- if (vma->vm_file)
- file_update_time(vma->vm_file);
-
/*
* Yes, Virginia, this is actually required to prevent a race
* with clear_page_dirty_for_io() from clearing the page dirty
@@ -2105,16 +2113,41 @@ unlock:
*
* do_no_page is protected similarly.
*/
- wait_on_page_locked(dirty_page);
- set_page_dirty_balance(dirty_page, page_mkwrite);
+ if (!page_mkwrite) {
+ wait_on_page_locked(dirty_page);
+ set_page_dirty_balance(dirty_page, page_mkwrite);
+ }
put_page(dirty_page);
+ if (page_mkwrite) {
+ struct address_space *mapping = dirty_page->mapping;
+
+ set_page_dirty(dirty_page);
+ unlock_page(dirty_page);
+ page_cache_release(dirty_page);
+ if (mapping) {
+ /*
+ * Some device drivers do not set page.mapping
+ * but still dirty their pages
+ */
+ balance_dirty_pages_ratelimited(mapping);
+ }
+ }
+
+ /* file_update_time outside page_lock */
+ if (vma->vm_file)
+ file_update_time(vma->vm_file);
}
return ret;
oom_free_new:
page_cache_release(new_page);
oom:
- if (old_page)
+ if (old_page) {
+ if (page_mkwrite) {
+ unlock_page(old_page);
+ page_cache_release(old_page);
+ }
page_cache_release(old_page);
+ }
return VM_FAULT_OOM;
unwritable_page:
@@ -2458,8 +2491,7 @@ static int do_swap_page(struct mm_struct *mm, struct vm_area_struct *vma,
if (mem_cgroup_try_charge_swapin(mm, page, GFP_KERNEL, &ptr)) {
ret = VM_FAULT_OOM;
- unlock_page(page);
- goto out;
+ goto out_page;
}
/*
@@ -2521,6 +2553,7 @@ out:
out_nomap:
mem_cgroup_cancel_charge_swapin(ptr);
pte_unmap_unlock(page_table, ptl);
+out_page:
unlock_page(page);
page_cache_release(page);
return ret;
@@ -2664,27 +2697,22 @@ static int __do_fault(struct mm_struct *mm, struct vm_area_struct *vma,
int tmp;
unlock_page(page);
- vmf.flags |= FAULT_FLAG_MKWRITE;
+ vmf.flags = FAULT_FLAG_WRITE|FAULT_FLAG_MKWRITE;
tmp = vma->vm_ops->page_mkwrite(vma, &vmf);
if (unlikely(tmp &
(VM_FAULT_ERROR | VM_FAULT_NOPAGE))) {
ret = tmp;
- anon = 1; /* no anon but release vmf.page */
- goto out_unlocked;
- }
- lock_page(page);
- /*
- * XXX: this is not quite right (racy vs
- * invalidate) to unlock and relock the page
- * like this, however a better fix requires
- * reworking page_mkwrite locking API, which
- * is better done later.
- */
- if (!page->mapping) {
- ret = 0;
- anon = 1; /* no anon but release vmf.page */
- goto out;
+ goto unwritable_page;
}
+ if (unlikely(!(tmp & VM_FAULT_LOCKED))) {
+ lock_page(page);
+ if (!page->mapping) {
+ ret = 0; /* retry the fault */
+ unlock_page(page);
+ goto unwritable_page;
+ }
+ } else
+ VM_BUG_ON(!PageLocked(page));
page_mkwrite = 1;
}
}
@@ -2736,19 +2764,35 @@ static int __do_fault(struct mm_struct *mm, struct vm_area_struct *vma,
pte_unmap_unlock(page_table, ptl);
out:
- unlock_page(vmf.page);
-out_unlocked:
- if (anon)
- page_cache_release(vmf.page);
- else if (dirty_page) {
- if (vma->vm_file)
- file_update_time(vma->vm_file);
+ if (dirty_page) {
+ struct address_space *mapping = page->mapping;
- set_page_dirty_balance(dirty_page, page_mkwrite);
+ if (set_page_dirty(dirty_page))
+ page_mkwrite = 1;
+ unlock_page(dirty_page);
put_page(dirty_page);
+ if (page_mkwrite && mapping) {
+ /*
+ * Some device drivers do not set page.mapping but still
+ * dirty their pages
+ */
+ balance_dirty_pages_ratelimited(mapping);
+ }
+
+ /* file_update_time outside page_lock */
+ if (vma->vm_file)
+ file_update_time(vma->vm_file);
+ } else {
+ unlock_page(vmf.page);
+ if (anon)
+ page_cache_release(vmf.page);
}
return ret;
+
+unwritable_page:
+ page_cache_release(page);
+ return ret;
}
static int do_linear_fault(struct mm_struct *mm, struct vm_area_struct *vma,
diff --git a/mm/mmap.c b/mm/mmap.c
index 3303d1ba8e8..6b7b1a95944 100644
--- a/mm/mmap.c
+++ b/mm/mmap.c
@@ -85,7 +85,7 @@ EXPORT_SYMBOL(vm_get_page_prot);
int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */
int sysctl_overcommit_ratio = 50; /* default is 50% */
int sysctl_max_map_count __read_mostly = DEFAULT_MAX_MAP_COUNT;
-atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0);
+struct percpu_counter vm_committed_as;
/*
* Check that a process has enough memory to allocate a new virtual
@@ -179,11 +179,7 @@ int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin)
if (mm)
allowed -= mm->total_vm / 32;
- /*
- * cast `allowed' as a signed long because vm_committed_space
- * sometimes has a negative value
- */
- if (atomic_long_read(&vm_committed_space) < (long)allowed)
+ if (percpu_counter_read_positive(&vm_committed_as) < allowed)
return 0;
error:
vm_unacct_memory(pages);
@@ -2481,4 +2477,8 @@ void mm_drop_all_locks(struct mm_struct *mm)
*/
void __init mmap_init(void)
{
+ int ret;
+
+ ret = percpu_counter_init(&vm_committed_as, 0);
+ VM_BUG_ON(ret);
}
diff --git a/mm/mmzone.c b/mm/mmzone.c
index 16ce8b955dc..f5b7d176021 100644
--- a/mm/mmzone.c
+++ b/mm/mmzone.c
@@ -6,6 +6,7 @@
#include <linux/stddef.h>
+#include <linux/mm.h>
#include <linux/mmzone.h>
#include <linux/module.h>
@@ -72,3 +73,17 @@ struct zoneref *next_zones_zonelist(struct zoneref *z,
*zone = zonelist_zone(z);
return z;
}
+
+#ifdef CONFIG_ARCH_HAS_HOLES_MEMORYMODEL
+int memmap_valid_within(unsigned long pfn,
+ struct page *page, struct zone *zone)
+{
+ if (page_to_pfn(page) != pfn)
+ return 0;
+
+ if (page_zone(page) != zone)
+ return 0;
+
+ return 1;
+}
+#endif /* CONFIG_ARCH_HAS_HOLES_MEMORYMODEL */
diff --git a/mm/nommu.c b/mm/nommu.c
index 72eda4aee2c..b571ef70742 100644
--- a/mm/nommu.c
+++ b/mm/nommu.c
@@ -62,11 +62,11 @@ void *high_memory;
struct page *mem_map;
unsigned long max_mapnr;
unsigned long num_physpages;
-atomic_long_t vm_committed_space = ATOMIC_LONG_INIT(0);
+struct percpu_counter vm_committed_as;
int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */
int sysctl_overcommit_ratio = 50; /* default is 50% */
int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT;
-int sysctl_nr_trim_pages = 1; /* page trimming behaviour */
+int sysctl_nr_trim_pages = CONFIG_NOMMU_INITIAL_TRIM_EXCESS;
int heap_stack_gap = 0;
atomic_long_t mmap_pages_allocated;
@@ -463,6 +463,10 @@ SYSCALL_DEFINE1(brk, unsigned long, brk)
*/
void __init mmap_init(void)
{
+ int ret;
+
+ ret = percpu_counter_init(&vm_committed_as, 0);
+ VM_BUG_ON(ret);
vm_region_jar = KMEM_CACHE(vm_region, SLAB_PANIC);
}
@@ -511,8 +515,6 @@ static void add_nommu_region(struct vm_region *region)
validate_nommu_regions();
- BUG_ON(region->vm_start & ~PAGE_MASK);
-
parent = NULL;
p = &nommu_region_tree.rb_node;
while (*p) {
@@ -1847,12 +1849,9 @@ int __vm_enough_memory(struct mm_struct *mm, long pages, int cap_sys_admin)
if (mm)
allowed -= mm->total_vm / 32;
- /*
- * cast `allowed' as a signed long because vm_committed_space
- * sometimes has a negative value
- */
- if (atomic_long_read(&vm_committed_space) < (long)allowed)
+ if (percpu_counter_read_positive(&vm_committed_as) < allowed)
return 0;
+
error:
vm_unacct_memory(pages);
diff --git a/mm/oom_kill.c b/mm/oom_kill.c
index 2f3166e308d..92bcf1db16b 100644
--- a/mm/oom_kill.c
+++ b/mm/oom_kill.c
@@ -514,34 +514,32 @@ void clear_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_mask)
*/
static void __out_of_memory(gfp_t gfp_mask, int order)
{
- if (sysctl_oom_kill_allocating_task) {
- oom_kill_process(current, gfp_mask, order, 0, NULL,
- "Out of memory (oom_kill_allocating_task)");
-
- } else {
- unsigned long points;
- struct task_struct *p;
-
-retry:
- /*
- * Rambo mode: Shoot down a process and hope it solves whatever
- * issues we may have.
- */
- p = select_bad_process(&points, NULL);
+ struct task_struct *p;
+ unsigned long points;
- if (PTR_ERR(p) == -1UL)
+ if (sysctl_oom_kill_allocating_task)
+ if (!oom_kill_process(current, gfp_mask, order, 0, NULL,
+ "Out of memory (oom_kill_allocating_task)"))
return;
+retry:
+ /*
+ * Rambo mode: Shoot down a process and hope it solves whatever
+ * issues we may have.
+ */
+ p = select_bad_process(&points, NULL);
- /* Found nothing?!?! Either we hang forever, or we panic. */
- if (!p) {
- read_unlock(&tasklist_lock);
- panic("Out of memory and no killable processes...\n");
- }
+ if (PTR_ERR(p) == -1UL)
+ return;
- if (oom_kill_process(p, gfp_mask, order, points, NULL,
- "Out of memory"))
- goto retry;
+ /* Found nothing?!?! Either we hang forever, or we panic. */
+ if (!p) {
+ read_unlock(&tasklist_lock);
+ panic("Out of memory and no killable processes...\n");
}
+
+ if (oom_kill_process(p, gfp_mask, order, points, NULL,
+ "Out of memory"))
+ goto retry;
}
/*
diff --git a/mm/page-writeback.c b/mm/page-writeback.c
index 30351f0063a..bb553c3e955 100644
--- a/mm/page-writeback.c
+++ b/mm/page-writeback.c
@@ -94,12 +94,12 @@ unsigned long vm_dirty_bytes;
/*
* The interval between `kupdate'-style writebacks
*/
-unsigned int dirty_writeback_interval = 5 * 100; /* sentiseconds */
+unsigned int dirty_writeback_interval = 5 * 100; /* centiseconds */
/*
* The longest time for which data is allowed to remain dirty
*/
-unsigned int dirty_expire_interval = 30 * 100; /* sentiseconds */
+unsigned int dirty_expire_interval = 30 * 100; /* centiseconds */
/*
* Flag that makes the machine dump writes/reads and block dirtyings.
@@ -770,7 +770,7 @@ static void wb_kupdate(unsigned long arg)
sync_supers();
- oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval);
+ oldest_jif = jiffies - msecs_to_jiffies(dirty_expire_interval * 10);
start_jif = jiffies;
next_jif = start_jif + msecs_to_jiffies(dirty_writeback_interval * 10);
nr_to_write = global_page_state(NR_FILE_DIRTY) +
diff --git a/mm/page_alloc.c b/mm/page_alloc.c
index e2f26991fff..fe753ecf2aa 100644
--- a/mm/page_alloc.c
+++ b/mm/page_alloc.c
@@ -2681,6 +2681,7 @@ static void __meminit zone_init_free_lists(struct zone *zone)
static int zone_batchsize(struct zone *zone)
{
+#ifdef CONFIG_MMU
int batch;
/*
@@ -2706,9 +2707,26 @@ static int zone_batchsize(struct zone *zone)
* of pages of one half of the possible page colors
* and the other with pages of the other colors.
*/
- batch = (1 << (fls(batch + batch/2)-1)) - 1;
+ batch = rounddown_pow_of_two(batch + batch/2) - 1;
return batch;
+
+#else
+ /* The deferral and batching of frees should be suppressed under NOMMU
+ * conditions.
+ *
+ * The problem is that NOMMU needs to be able to allocate large chunks
+ * of contiguous memory as there's no hardware page translation to
+ * assemble apparent contiguous memory from discontiguous pages.
+ *
+ * Queueing large contiguous runs of pages for batching, however,
+ * causes the pages to actually be freed in smaller chunks. As there
+ * can be a significant delay between the individual batches being
+ * recycled, this leads to the once large chunks of space being
+ * fragmented and becoming unavailable for high-order allocations.
+ */
+ return 0;
+#endif
}
static void setup_pageset(struct per_cpu_pageset *p, unsigned long batch)
diff --git a/mm/pdflush.c b/mm/pdflush.c
index f2caf96993f..235ac440c44 100644
--- a/mm/pdflush.c
+++ b/mm/pdflush.c
@@ -58,14 +58,6 @@ static DEFINE_SPINLOCK(pdflush_lock);
int nr_pdflush_threads = 0;
/*
- * The max/min number of pdflush threads. R/W by sysctl at
- * /proc/sys/vm/nr_pdflush_threads_max/min
- */
-int nr_pdflush_threads_max __read_mostly = MAX_PDFLUSH_THREADS;
-int nr_pdflush_threads_min __read_mostly = MIN_PDFLUSH_THREADS;
-
-
-/*
* The time at which the pdflush thread pool last went empty
*/
static unsigned long last_empty_jifs;
@@ -76,7 +68,7 @@ static unsigned long last_empty_jifs;
* Thread pool management algorithm:
*
* - The minimum and maximum number of pdflush instances are bound
- * by nr_pdflush_threads_min and nr_pdflush_threads_max.
+ * by MIN_PDFLUSH_THREADS and MAX_PDFLUSH_THREADS.
*
* - If there have been no idle pdflush instances for 1 second, create
* a new one.
@@ -142,13 +134,14 @@ static int __pdflush(struct pdflush_work *my_work)
* To throttle creation, we reset last_empty_jifs.
*/
if (time_after(jiffies, last_empty_jifs + 1 * HZ)) {
- if (list_empty(&pdflush_list) &&
- nr_pdflush_threads < nr_pdflush_threads_max) {
- last_empty_jifs = jiffies;
- nr_pdflush_threads++;
- spin_unlock_irq(&pdflush_lock);
- start_one_pdflush_thread();
- spin_lock_irq(&pdflush_lock);
+ if (list_empty(&pdflush_list)) {
+ if (nr_pdflush_threads < MAX_PDFLUSH_THREADS) {
+ last_empty_jifs = jiffies;
+ nr_pdflush_threads++;
+ spin_unlock_irq(&pdflush_lock);
+ start_one_pdflush_thread();
+ spin_lock_irq(&pdflush_lock);
+ }
}
}
@@ -160,7 +153,7 @@ static int __pdflush(struct pdflush_work *my_work)
*/
if (list_empty(&pdflush_list))
continue;
- if (nr_pdflush_threads <= nr_pdflush_threads_min)
+ if (nr_pdflush_threads <= MIN_PDFLUSH_THREADS)
continue;
pdf = list_entry(pdflush_list.prev, struct pdflush_work, list);
if (time_after(jiffies, pdf->when_i_went_to_sleep + 1 * HZ)) {
@@ -266,9 +259,9 @@ static int __init pdflush_init(void)
* Pre-set nr_pdflush_threads... If we fail to create,
* the count will be decremented.
*/
- nr_pdflush_threads = nr_pdflush_threads_min;
+ nr_pdflush_threads = MIN_PDFLUSH_THREADS;
- for (i = 0; i < nr_pdflush_threads_min; i++)
+ for (i = 0; i < MIN_PDFLUSH_THREADS; i++)
start_one_pdflush_thread();
return 0;
}
diff --git a/mm/rmap.c b/mm/rmap.c
index 16521664010..23122af3261 100644
--- a/mm/rmap.c
+++ b/mm/rmap.c
@@ -14,7 +14,7 @@
* Original design by Rik van Riel <riel@conectiva.com.br> 2001
* File methods by Dave McCracken <dmccr@us.ibm.com> 2003, 2004
* Anonymous methods by Andrea Arcangeli <andrea@suse.de> 2004
- * Contributions by Hugh Dickins <hugh@veritas.com> 2003, 2004
+ * Contributions by Hugh Dickins 2003, 2004
*/
/*
diff --git a/mm/shmem.c b/mm/shmem.c
index f9cb20ebb99..b25f95ce3db 100644
--- a/mm/shmem.c
+++ b/mm/shmem.c
@@ -1340,8 +1340,12 @@ repeat:
shmem_swp_unmap(entry);
spin_unlock(&info->lock);
if (error == -ENOMEM) {
- /* allow reclaim from this memory cgroup */
- error = mem_cgroup_shrink_usage(swappage,
+ /*
+ * reclaim from proper memory cgroup and
+ * call memcg's OOM if needed.
+ */
+ error = mem_cgroup_shmem_charge_fallback(
+ swappage,
current->mm,
gfp);
if (error) {
diff --git a/mm/slob.c b/mm/slob.c
index a2d4ab32198..f92e66d558b 100644
--- a/mm/slob.c
+++ b/mm/slob.c
@@ -60,6 +60,7 @@
#include <linux/kernel.h>
#include <linux/slab.h>
#include <linux/mm.h>
+#include <linux/swap.h> /* struct reclaim_state */
#include <linux/cache.h>
#include <linux/init.h>
#include <linux/module.h>
@@ -255,6 +256,8 @@ static void *slob_new_pages(gfp_t gfp, int order, int node)
static void slob_free_pages(void *b, int order)
{
+ if (current->reclaim_state)
+ current->reclaim_state->reclaimed_slab += 1 << order;
free_pages((unsigned long)b, order);
}
@@ -407,7 +410,7 @@ static void slob_free(void *block, int size)
spin_unlock_irqrestore(&slob_lock, flags);
clear_slob_page(sp);
free_slob_page(sp);
- free_page((unsigned long)b);
+ slob_free_pages(b, 0);
return;
}
diff --git a/mm/slub.c b/mm/slub.c
index 7ab54ecbd3f..65ffda5934b 100644
--- a/mm/slub.c
+++ b/mm/slub.c
@@ -9,6 +9,7 @@
*/
#include <linux/mm.h>
+#include <linux/swap.h> /* struct reclaim_state */
#include <linux/module.h>
#include <linux/bit_spinlock.h>
#include <linux/interrupt.h>
@@ -1170,6 +1171,8 @@ static void __free_slab(struct kmem_cache *s, struct page *page)
__ClearPageSlab(page);
reset_page_mapcount(page);
+ if (current->reclaim_state)
+ current->reclaim_state->reclaimed_slab += pages;
__free_pages(page, order);
}
@@ -1909,7 +1912,7 @@ static inline int calculate_order(int size)
* Doh this slab cannot be placed using slub_max_order.
*/
order = slab_order(size, 1, MAX_ORDER, 1);
- if (order <= MAX_ORDER)
+ if (order < MAX_ORDER)
return order;
return -ENOSYS;
}
@@ -2522,6 +2525,7 @@ __setup("slub_min_order=", setup_slub_min_order);
static int __init setup_slub_max_order(char *str)
{
get_option(&str, &slub_max_order);
+ slub_max_order = min(slub_max_order, MAX_ORDER - 1);
return 1;
}
diff --git a/mm/swap.c b/mm/swap.c
index bede23ce64e..cb29ae5d33a 100644
--- a/mm/swap.c
+++ b/mm/swap.c
@@ -491,49 +491,6 @@ unsigned pagevec_lookup_tag(struct pagevec *pvec, struct address_space *mapping,
EXPORT_SYMBOL(pagevec_lookup_tag);
-#ifdef CONFIG_SMP
-/*
- * We tolerate a little inaccuracy to avoid ping-ponging the counter between
- * CPUs
- */
-#define ACCT_THRESHOLD max(16, NR_CPUS * 2)
-
-static DEFINE_PER_CPU(long, committed_space);
-
-void vm_acct_memory(long pages)
-{
- long *local;
-
- preempt_disable();
- local = &__get_cpu_var(committed_space);
- *local += pages;
- if (*local > ACCT_THRESHOLD || *local < -ACCT_THRESHOLD) {
- atomic_long_add(*local, &vm_committed_space);
- *local = 0;
- }
- preempt_enable();
-}
-
-#ifdef CONFIG_HOTPLUG_CPU
-
-/* Drop the CPU's cached committed space back into the central pool. */
-static int cpu_swap_callback(struct notifier_block *nfb,
- unsigned long action,
- void *hcpu)
-{
- long *committed;
-
- committed = &per_cpu(committed_space, (long)hcpu);
- if (action == CPU_DEAD || action == CPU_DEAD_FROZEN) {
- atomic_long_add(*committed, &vm_committed_space);
- *committed = 0;
- drain_cpu_pagevecs((long)hcpu);
- }
- return NOTIFY_OK;
-}
-#endif /* CONFIG_HOTPLUG_CPU */
-#endif /* CONFIG_SMP */
-
/*
* Perform any setup for the swap system
*/
@@ -554,7 +511,4 @@ void __init swap_setup(void)
* Right now other parts of the system means that we
* _really_ don't want to cluster much more
*/
-#ifdef CONFIG_HOTPLUG_CPU
- hotcpu_notifier(cpu_swap_callback, 0);
-#endif
}
diff --git a/mm/vmalloc.c b/mm/vmalloc.c
index fab19876b4d..083716ea38c 100644
--- a/mm/vmalloc.c
+++ b/mm/vmalloc.c
@@ -402,6 +402,7 @@ overflow:
printk(KERN_WARNING
"vmap allocation for size %lu failed: "
"use vmalloc=<size> to increase size.\n", size);
+ kfree(va);
return ERR_PTR(-EBUSY);
}
diff --git a/mm/vmscan.c b/mm/vmscan.c
index eac9577941f..5fa3eda1f03 100644
--- a/mm/vmscan.c
+++ b/mm/vmscan.c
@@ -1471,7 +1471,7 @@ static void shrink_zone(int priority, struct zone *zone,
for_each_evictable_lru(l) {
int file = is_file_lru(l);
- int scan;
+ unsigned long scan;
scan = zone_nr_pages(zone, sc, l);
if (priority) {
diff --git a/mm/vmstat.c b/mm/vmstat.c
index 66f6130976c..74d66dba0cb 100644
--- a/mm/vmstat.c
+++ b/mm/vmstat.c
@@ -509,22 +509,11 @@ static void pagetypeinfo_showblockcount_print(struct seq_file *m,
continue;
page = pfn_to_page(pfn);
-#ifdef CONFIG_ARCH_FLATMEM_HAS_HOLES
- /*
- * Ordinarily, memory holes in flatmem still have a valid
- * memmap for the PFN range. However, an architecture for
- * embedded systems (e.g. ARM) can free up the memmap backing
- * holes to save memory on the assumption the memmap is
- * never used. The page_zone linkages are then broken even
- * though pfn_valid() returns true. Skip the page if the
- * linkages are broken. Even if this test passed, the impact
- * is that the counters for the movable type are off but
- * fragmentation monitoring is likely meaningless on small
- * systems.
- */
- if (page_zone(page) != zone)
+
+ /* Watch for unexpected holes punched in the memmap */
+ if (!memmap_valid_within(pfn, page, zone))
continue;
-#endif
+
mtype = get_pageblock_migratetype(page);
if (mtype < MIGRATE_TYPES)
diff --git a/net/9p/client.c b/net/9p/client.c
index 1eb580c38fb..dd43a8289b0 100644
--- a/net/9p/client.c
+++ b/net/9p/client.c
@@ -203,7 +203,6 @@ static struct p9_req_t *p9_tag_alloc(struct p9_client *c, u16 tag)
p9pdu_reset(req->tc);
p9pdu_reset(req->rc);
- req->flush_tag = 0;
req->tc->tag = tag-1;
req->status = REQ_STATUS_ALLOC;
@@ -324,35 +323,9 @@ static void p9_free_req(struct p9_client *c, struct p9_req_t *r)
*/
void p9_client_cb(struct p9_client *c, struct p9_req_t *req)
{
- struct p9_req_t *other_req;
- unsigned long flags;
-
P9_DPRINTK(P9_DEBUG_MUX, " tag %d\n", req->tc->tag);
-
- if (req->status == REQ_STATUS_ERROR)
- wake_up(req->wq);
-
- if (req->flush_tag) { /* flush receive path */
- P9_DPRINTK(P9_DEBUG_9P, "<<< RFLUSH %d\n", req->tc->tag);
- spin_lock_irqsave(&c->lock, flags);
- other_req = p9_tag_lookup(c, req->flush_tag);
- if (other_req->status != REQ_STATUS_FLSH) /* stale flush */
- spin_unlock_irqrestore(&c->lock, flags);
- else {
- other_req->status = REQ_STATUS_FLSHD;
- spin_unlock_irqrestore(&c->lock, flags);
- wake_up(other_req->wq);
- }
- p9_free_req(c, req);
- } else { /* normal receive path */
- P9_DPRINTK(P9_DEBUG_MUX, "normal: tag %d\n", req->tc->tag);
- spin_lock_irqsave(&c->lock, flags);
- if (req->status != REQ_STATUS_FLSHD)
- req->status = REQ_STATUS_RCVD;
- spin_unlock_irqrestore(&c->lock, flags);
- wake_up(req->wq);
- P9_DPRINTK(P9_DEBUG_MUX, "wakeup: %d\n", req->tc->tag);
- }
+ wake_up(req->wq);
+ P9_DPRINTK(P9_DEBUG_MUX, "wakeup: %d\n", req->tc->tag);
}
EXPORT_SYMBOL(p9_client_cb);
@@ -486,9 +459,15 @@ static int p9_client_flush(struct p9_client *c, struct p9_req_t *oldreq)
if (IS_ERR(req))
return PTR_ERR(req);
- req->flush_tag = oldtag;
- /* we don't free anything here because RPC isn't complete */
+ /* if we haven't received a response for oldreq,
+ remove it from the list. */
+ spin_lock(&c->lock);
+ if (oldreq->status == REQ_STATUS_FLSH)
+ list_del(&oldreq->req_list);
+ spin_unlock(&c->lock);
+
+ p9_free_req(c, req);
return 0;
}
@@ -509,7 +488,6 @@ p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...)
struct p9_req_t *req;
unsigned long flags;
int sigpending;
- int flushed = 0;
P9_DPRINTK(P9_DEBUG_MUX, "client %p op %d\n", c, type);
@@ -546,42 +524,28 @@ p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...)
goto reterr;
}
- /* if it was a flush we just transmitted, return our tag */
- if (type == P9_TFLUSH)
- return req;
-again:
P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d\n", req->wq, tag);
err = wait_event_interruptible(*req->wq,
req->status >= REQ_STATUS_RCVD);
- P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d returned %d (flushed=%d)\n",
- req->wq, tag, err, flushed);
+ P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d returned %d\n",
+ req->wq, tag, err);
if (req->status == REQ_STATUS_ERROR) {
P9_DPRINTK(P9_DEBUG_ERROR, "req_status error %d\n", req->t_err);
err = req->t_err;
- } else if (err == -ERESTARTSYS && flushed) {
- P9_DPRINTK(P9_DEBUG_MUX, "flushed - going again\n");
- goto again;
- } else if (req->status == REQ_STATUS_FLSHD) {
- P9_DPRINTK(P9_DEBUG_MUX, "flushed - erestartsys\n");
- err = -ERESTARTSYS;
}
- if ((err == -ERESTARTSYS) && (c->status == Connected) && (!flushed)) {
+ if ((err == -ERESTARTSYS) && (c->status == Connected)) {
P9_DPRINTK(P9_DEBUG_MUX, "flushing\n");
- spin_lock_irqsave(&c->lock, flags);
- if (req->status == REQ_STATUS_SENT)
- req->status = REQ_STATUS_FLSH;
- spin_unlock_irqrestore(&c->lock, flags);
sigpending = 1;
- flushed = 1;
clear_thread_flag(TIF_SIGPENDING);
- if (c->trans_mod->cancel(c, req)) {
- err = p9_client_flush(c, req);
- if (err == 0)
- goto again;
- }
+ if (c->trans_mod->cancel(c, req))
+ p9_client_flush(c, req);
+
+ /* if we received the response anyway, don't signal error */
+ if (req->status == REQ_STATUS_RCVD)
+ err = 0;
}
if (sigpending) {
@@ -1244,19 +1208,53 @@ struct p9_wstat *p9_client_stat(struct p9_fid *fid)
ret->name, ret->uid, ret->gid, ret->muid, ret->extension,
ret->n_uid, ret->n_gid, ret->n_muid);
+ p9_free_req(clnt, req);
+ return ret;
+
free_and_error:
p9_free_req(clnt, req);
error:
- return ret;
+ kfree(ret);
+ return ERR_PTR(err);
}
EXPORT_SYMBOL(p9_client_stat);
+static int p9_client_statsize(struct p9_wstat *wst, int optional)
+{
+ int ret;
+
+ /* size[2] type[2] dev[4] qid[13] */
+ /* mode[4] atime[4] mtime[4] length[8]*/
+ /* name[s] uid[s] gid[s] muid[s] */
+ ret = 2+2+4+13+4+4+4+8+2+2+2+2;
+
+ if (wst->name)
+ ret += strlen(wst->name);
+ if (wst->uid)
+ ret += strlen(wst->uid);
+ if (wst->gid)
+ ret += strlen(wst->gid);
+ if (wst->muid)
+ ret += strlen(wst->muid);
+
+ if (optional) {
+ ret += 2+4+4+4; /* extension[s] n_uid[4] n_gid[4] n_muid[4] */
+ if (wst->extension)
+ ret += strlen(wst->extension);
+ }
+
+ return ret;
+}
+
int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst)
{
int err;
struct p9_req_t *req;
struct p9_client *clnt;
+ err = 0;
+ clnt = fid->clnt;
+ wst->size = p9_client_statsize(wst, clnt->dotu);
P9_DPRINTK(P9_DEBUG_9P, ">>> TWSTAT fid %d\n", fid->fid);
P9_DPRINTK(P9_DEBUG_9P,
" sz=%x type=%x dev=%x qid=%x.%llx.%x\n"
@@ -1268,10 +1266,8 @@ int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst)
wst->atime, wst->mtime, (unsigned long long)wst->length,
wst->name, wst->uid, wst->gid, wst->muid, wst->extension,
wst->n_uid, wst->n_gid, wst->n_muid);
- err = 0;
- clnt = fid->clnt;
- req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, 0, wst);
+ req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, wst->size, wst);
if (IS_ERR(req)) {
err = PTR_ERR(req);
goto error;
diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c
index c613ed08a5e..a2a1814c7a8 100644
--- a/net/9p/trans_fd.c
+++ b/net/9p/trans_fd.c
@@ -213,8 +213,8 @@ static void p9_conn_cancel(struct p9_conn *m, int err)
spin_unlock_irqrestore(&m->client->lock, flags);
list_for_each_entry_safe(req, rtmp, &cancel_list, req_list) {
- list_del(&req->req_list);
P9_DPRINTK(P9_DEBUG_ERROR, "call back req %p\n", req);
+ list_del(&req->req_list);
p9_client_cb(m->client, req);
}
}
@@ -336,7 +336,8 @@ static void p9_read_work(struct work_struct *work)
"mux %p pkt: size: %d bytes tag: %d\n", m, n, tag);
m->req = p9_tag_lookup(m->client, tag);
- if (!m->req) {
+ if (!m->req || (m->req->status != REQ_STATUS_SENT &&
+ m->req->status != REQ_STATUS_FLSH)) {
P9_DPRINTK(P9_DEBUG_ERROR, "Unexpected packet tag %d\n",
tag);
err = -EIO;
@@ -361,10 +362,11 @@ static void p9_read_work(struct work_struct *work)
if ((m->req) && (m->rpos == m->rsize)) { /* packet is read in */
P9_DPRINTK(P9_DEBUG_TRANS, "got new packet\n");
spin_lock(&m->client->lock);
+ if (m->req->status != REQ_STATUS_ERROR)
+ m->req->status = REQ_STATUS_RCVD;
list_del(&m->req->req_list);
spin_unlock(&m->client->lock);
p9_client_cb(m->client, m->req);
-
m->rbuf = NULL;
m->rpos = 0;
m->rsize = 0;
@@ -454,6 +456,7 @@ static void p9_write_work(struct work_struct *work)
req = list_entry(m->unsent_req_list.next, struct p9_req_t,
req_list);
req->status = REQ_STATUS_SENT;
+ P9_DPRINTK(P9_DEBUG_TRANS, "move req %p\n", req);
list_move_tail(&req->req_list, &m->req_list);
m->wbuf = req->tc->sdata;
@@ -683,12 +686,13 @@ static int p9_fd_cancel(struct p9_client *client, struct p9_req_t *req)
P9_DPRINTK(P9_DEBUG_TRANS, "client %p req %p\n", client, req);
spin_lock(&client->lock);
- list_del(&req->req_list);
if (req->status == REQ_STATUS_UNSENT) {
+ list_del(&req->req_list);
req->status = REQ_STATUS_FLSHD;
ret = 0;
- }
+ } else if (req->status == REQ_STATUS_SENT)
+ req->status = REQ_STATUS_FLSH;
spin_unlock(&client->lock);
diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c
index 7fa0eb20b2f..ac4990041eb 100644
--- a/net/9p/trans_rdma.c
+++ b/net/9p/trans_rdma.c
@@ -295,6 +295,7 @@ handle_recv(struct p9_client *client, struct p9_trans_rdma *rdma,
goto err_out;
req->rc = c->rc;
+ req->status = REQ_STATUS_RCVD;
p9_client_cb(client, req);
return;
diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c
index 2d7781ec663..bb8579a141a 100644
--- a/net/9p/trans_virtio.c
+++ b/net/9p/trans_virtio.c
@@ -134,6 +134,7 @@ static void req_done(struct virtqueue *vq)
P9_DPRINTK(P9_DEBUG_TRANS, ": rc %p\n", rc);
P9_DPRINTK(P9_DEBUG_TRANS, ": lookup tag %d\n", rc->tag);
req = p9_tag_lookup(chan->client, rc->tag);
+ req->status = REQ_STATUS_RCVD;
p9_client_cb(chan->client, req);
}
}
diff --git a/net/Kconfig b/net/Kconfig
index ce77db4fcec..c19f549c8e7 100644
--- a/net/Kconfig
+++ b/net/Kconfig
@@ -119,12 +119,6 @@ menuconfig NETFILTER
<file:Documentation/Changes> under "iptables" for the location of
these packages.
- Make sure to say N to "Fast switching" below if you intend to say Y
- here, as Fast switching currently bypasses netfilter.
-
- Chances are that you should say Y here if you compile a kernel which
- will run as a router and N for regular hosts. If unsure, say N.
-
if NETFILTER
config NETFILTER_DEBUG
diff --git a/net/atm/br2684.c b/net/atm/br2684.c
index 334fcd4a4ea..3100a8940af 100644
--- a/net/atm/br2684.c
+++ b/net/atm/br2684.c
@@ -549,6 +549,7 @@ static void br2684_setup(struct net_device *netdev)
struct br2684_dev *brdev = BRPRIV(netdev);
ether_setup(netdev);
+ brdev->net_dev = netdev;
netdev->netdev_ops = &br2684_netdev_ops;
diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c
index 375f4b4f7f7..fa47d5d84f5 100644
--- a/net/bluetooth/hci_conn.c
+++ b/net/bluetooth/hci_conn.c
@@ -171,10 +171,8 @@ static void hci_conn_timeout(unsigned long arg)
switch (conn->state) {
case BT_CONNECT:
case BT_CONNECT2:
- if (conn->type == ACL_LINK)
+ if (conn->type == ACL_LINK && conn->out)
hci_acl_connect_cancel(conn);
- else
- hci_acl_disconn(conn, 0x13);
break;
case BT_CONFIG:
case BT_CONNECTED:
@@ -248,6 +246,8 @@ struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst)
if (hdev->notify)
hdev->notify(hdev, HCI_NOTIFY_CONN_ADD);
+ hci_conn_init_sysfs(conn);
+
tasklet_enable(&hdev->tx_task);
return conn;
@@ -290,6 +290,8 @@ int hci_conn_del(struct hci_conn *conn)
hci_conn_del_sysfs(conn);
+ hci_dev_put(hdev);
+
return 0;
}
diff --git a/net/bluetooth/hci_event.c b/net/bluetooth/hci_event.c
index 4e7cb88e5da..184ba0a88ec 100644
--- a/net/bluetooth/hci_event.c
+++ b/net/bluetooth/hci_event.c
@@ -1493,7 +1493,7 @@ static inline void hci_pin_code_request_evt(struct hci_dev *hdev, struct sk_buff
hci_dev_lock(hdev);
conn = hci_conn_hash_lookup_ba(hdev, ACL_LINK, &ev->bdaddr);
- if (conn) {
+ if (conn && conn->state == BT_CONNECTED) {
hci_conn_hold(conn);
conn->disc_timeout = HCI_PAIRING_TIMEOUT;
hci_conn_put(conn);
diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c
index b7c51082dde..4cc3624bd22 100644
--- a/net/bluetooth/hci_sysfs.c
+++ b/net/bluetooth/hci_sysfs.c
@@ -9,7 +9,7 @@
struct class *bt_class = NULL;
EXPORT_SYMBOL_GPL(bt_class);
-static struct workqueue_struct *bluetooth;
+static struct workqueue_struct *bt_workq;
static inline char *link_typetostr(int type)
{
@@ -88,35 +88,19 @@ static struct device_type bt_link = {
static void add_conn(struct work_struct *work)
{
struct hci_conn *conn = container_of(work, struct hci_conn, work_add);
+ struct hci_dev *hdev = conn->hdev;
+
+ /* ensure previous del is complete */
+ flush_work(&conn->work_del);
- /* ensure previous add/del is complete */
- flush_workqueue(bluetooth);
+ dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle);
if (device_add(&conn->dev) < 0) {
BT_ERR("Failed to register connection device");
return;
}
-}
-void hci_conn_add_sysfs(struct hci_conn *conn)
-{
- struct hci_dev *hdev = conn->hdev;
-
- BT_DBG("conn %p", conn);
-
- conn->dev.type = &bt_link;
- conn->dev.class = bt_class;
- conn->dev.parent = &hdev->dev;
-
- dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle);
-
- dev_set_drvdata(&conn->dev, conn);
-
- device_initialize(&conn->dev);
-
- INIT_WORK(&conn->work_add, add_conn);
-
- queue_work(bluetooth, &conn->work_add);
+ hci_dev_hold(hdev);
}
/*
@@ -134,8 +118,11 @@ static void del_conn(struct work_struct *work)
struct hci_conn *conn = container_of(work, struct hci_conn, work_del);
struct hci_dev *hdev = conn->hdev;
- /* ensure previous add/del is complete */
- flush_workqueue(bluetooth);
+ /* ensure previous add is complete */
+ flush_work(&conn->work_add);
+
+ if (!device_is_registered(&conn->dev))
+ return;
while (1) {
struct device *dev;
@@ -149,19 +136,40 @@ static void del_conn(struct work_struct *work)
device_del(&conn->dev);
put_device(&conn->dev);
+
hci_dev_put(hdev);
}
-void hci_conn_del_sysfs(struct hci_conn *conn)
+void hci_conn_init_sysfs(struct hci_conn *conn)
{
+ struct hci_dev *hdev = conn->hdev;
+
BT_DBG("conn %p", conn);
- if (!device_is_registered(&conn->dev))
- return;
+ conn->dev.type = &bt_link;
+ conn->dev.class = bt_class;
+ conn->dev.parent = &hdev->dev;
+
+ dev_set_drvdata(&conn->dev, conn);
+
+ device_initialize(&conn->dev);
+ INIT_WORK(&conn->work_add, add_conn);
INIT_WORK(&conn->work_del, del_conn);
+}
+
+void hci_conn_add_sysfs(struct hci_conn *conn)
+{
+ BT_DBG("conn %p", conn);
+
+ queue_work(bt_workq, &conn->work_add);
+}
+
+void hci_conn_del_sysfs(struct hci_conn *conn)
+{
+ BT_DBG("conn %p", conn);
- queue_work(bluetooth, &conn->work_del);
+ queue_work(bt_workq, &conn->work_del);
}
static inline char *host_typetostr(int type)
@@ -438,13 +446,13 @@ void hci_unregister_sysfs(struct hci_dev *hdev)
int __init bt_sysfs_init(void)
{
- bluetooth = create_singlethread_workqueue("bluetooth");
- if (!bluetooth)
+ bt_workq = create_singlethread_workqueue("bluetooth");
+ if (!bt_workq)
return -ENOMEM;
bt_class = class_create(THIS_MODULE, "bluetooth");
if (IS_ERR(bt_class)) {
- destroy_workqueue(bluetooth);
+ destroy_workqueue(bt_workq);
return PTR_ERR(bt_class);
}
@@ -453,7 +461,7 @@ int __init bt_sysfs_init(void)
void bt_sysfs_cleanup(void)
{
- destroy_workqueue(bluetooth);
+ destroy_workqueue(bt_workq);
class_destroy(bt_class);
}
diff --git a/net/bridge/br_input.c b/net/bridge/br_input.c
index 30b88777c3d..5ee1a3682bf 100644
--- a/net/bridge/br_input.c
+++ b/net/bridge/br_input.c
@@ -134,6 +134,10 @@ struct sk_buff *br_handle_frame(struct net_bridge_port *p, struct sk_buff *skb)
if (skb->protocol == htons(ETH_P_PAUSE))
goto drop;
+ /* If STP is turned off, then forward */
+ if (p->br->stp_enabled == BR_NO_STP && dest[5] == 0)
+ goto forward;
+
if (NF_HOOK(PF_BRIDGE, NF_BR_LOCAL_IN, skb, skb->dev,
NULL, br_handle_local_finish))
return NULL; /* frame consumed by filter */
@@ -141,6 +145,7 @@ struct sk_buff *br_handle_frame(struct net_bridge_port *p, struct sk_buff *skb)
return skb; /* continue processing */
}
+forward:
switch (p->state) {
case BR_STATE_FORWARDING:
rhook = rcu_dereference(br_should_route_hook);
diff --git a/net/bridge/br_stp.c b/net/bridge/br_stp.c
index 6e63ec3f1fc..0660515f399 100644
--- a/net/bridge/br_stp.c
+++ b/net/bridge/br_stp.c
@@ -297,6 +297,9 @@ void br_topology_change_detection(struct net_bridge *br)
{
int isroot = br_is_root_bridge(br);
+ if (br->stp_enabled != BR_KERNEL_STP)
+ return;
+
pr_info("%s: topology change detected, %s\n", br->dev->name,
isroot ? "propagating" : "sending tcn bpdu");
diff --git a/net/core/dev.c b/net/core/dev.c
index 308a7d0c277..e2e9e4af3ac 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1735,11 +1735,12 @@ u16 skb_tx_hash(const struct net_device *dev, const struct sk_buff *skb)
{
u32 hash;
- if (skb_rx_queue_recorded(skb)) {
- hash = skb_get_rx_queue(skb);
- } else if (skb->sk && skb->sk->sk_hash) {
+ if (skb_rx_queue_recorded(skb))
+ return skb_get_rx_queue(skb) % dev->real_num_tx_queues;
+
+ if (skb->sk && skb->sk->sk_hash)
hash = skb->sk->sk_hash;
- } else
+ else
hash = skb->protocol;
hash = jhash_1word(hash, skb_tx_hashrnd);
diff --git a/net/core/gen_estimator.c b/net/core/gen_estimator.c
index 9cc9f95b109..6d62d4618cf 100644
--- a/net/core/gen_estimator.c
+++ b/net/core/gen_estimator.c
@@ -66,9 +66,9 @@
NOTES.
- * The stored value for avbps is scaled by 2^5, so that maximal
- rate is ~1Gbit, avpps is scaled by 2^10.
-
+ * avbps is scaled by 2^5, avpps is scaled by 2^10.
+ * both values are reported as 32 bit unsigned values. bps can
+ overflow for fast links : max speed being 34360Mbit/sec
* Minimal interval is HZ/4=250msec (it is the greatest common divisor
for HZ=100 and HZ=1024 8)), maximal interval
is (HZ*2^EST_MAX_INTERVAL)/4 = 8sec. Shorter intervals
@@ -86,9 +86,9 @@ struct gen_estimator
spinlock_t *stats_lock;
int ewma_log;
u64 last_bytes;
+ u64 avbps;
u32 last_packets;
u32 avpps;
- u32 avbps;
struct rcu_head e_rcu;
struct rb_node node;
};
@@ -115,6 +115,7 @@ static void est_timer(unsigned long arg)
rcu_read_lock();
list_for_each_entry_rcu(e, &elist[idx].list, list) {
u64 nbytes;
+ u64 brate;
u32 npackets;
u32 rate;
@@ -125,9 +126,9 @@ static void est_timer(unsigned long arg)
nbytes = e->bstats->bytes;
npackets = e->bstats->packets;
- rate = (nbytes - e->last_bytes)<<(7 - idx);
+ brate = (nbytes - e->last_bytes)<<(7 - idx);
e->last_bytes = nbytes;
- e->avbps += ((long)rate - (long)e->avbps) >> e->ewma_log;
+ e->avbps += ((s64)(brate - e->avbps)) >> e->ewma_log;
e->rate_est->bps = (e->avbps+0xF)>>5;
rate = (npackets - e->last_packets)<<(12 - idx);
diff --git a/net/core/netpoll.c b/net/core/netpoll.c
index b5873bdff61..64f51eec657 100644
--- a/net/core/netpoll.c
+++ b/net/core/netpoll.c
@@ -175,9 +175,13 @@ static void service_arp_queue(struct netpoll_info *npi)
void netpoll_poll(struct netpoll *np)
{
struct net_device *dev = np->dev;
- const struct net_device_ops *ops = dev->netdev_ops;
+ const struct net_device_ops *ops;
+
+ if (!dev || !netif_running(dev))
+ return;
- if (!dev || !netif_running(dev) || !ops->ndo_poll_controller)
+ ops = dev->netdev_ops;
+ if (!ops->ndo_poll_controller)
return;
/* Process pending work on NIC */
diff --git a/net/core/skbuff.c b/net/core/skbuff.c
index ce6356cd9f7..e505b5392e1 100644
--- a/net/core/skbuff.c
+++ b/net/core/skbuff.c
@@ -502,7 +502,9 @@ int skb_recycle_check(struct sk_buff *skb, int skb_size)
shinfo->gso_segs = 0;
shinfo->gso_type = 0;
shinfo->ip6_frag_id = 0;
+ shinfo->tx_flags.flags = 0;
shinfo->frag_list = NULL;
+ memset(&shinfo->hwtstamps, 0, sizeof(shinfo->hwtstamps));
memset(skb, 0, offsetof(struct sk_buff, tail));
skb->data = skb->head + NET_SKB_PAD;
@@ -1365,9 +1367,8 @@ static void sock_spd_release(struct splice_pipe_desc *spd, unsigned int i)
static inline struct page *linear_to_page(struct page *page, unsigned int *len,
unsigned int *offset,
- struct sk_buff *skb)
+ struct sk_buff *skb, struct sock *sk)
{
- struct sock *sk = skb->sk;
struct page *p = sk->sk_sndmsg_page;
unsigned int off;
@@ -1405,13 +1406,14 @@ new_page:
*/
static inline int spd_fill_page(struct splice_pipe_desc *spd, struct page *page,
unsigned int *len, unsigned int offset,
- struct sk_buff *skb, int linear)
+ struct sk_buff *skb, int linear,
+ struct sock *sk)
{
if (unlikely(spd->nr_pages == PIPE_BUFFERS))
return 1;
if (linear) {
- page = linear_to_page(page, len, &offset, skb);
+ page = linear_to_page(page, len, &offset, skb, sk);
if (!page)
return 1;
} else
@@ -1442,7 +1444,8 @@ static inline void __segment_seek(struct page **page, unsigned int *poff,
static inline int __splice_segment(struct page *page, unsigned int poff,
unsigned int plen, unsigned int *off,
unsigned int *len, struct sk_buff *skb,
- struct splice_pipe_desc *spd, int linear)
+ struct splice_pipe_desc *spd, int linear,
+ struct sock *sk)
{
if (!*len)
return 1;
@@ -1465,7 +1468,7 @@ static inline int __splice_segment(struct page *page, unsigned int poff,
/* the linear region may spread across several pages */
flen = min_t(unsigned int, flen, PAGE_SIZE - poff);
- if (spd_fill_page(spd, page, &flen, poff, skb, linear))
+ if (spd_fill_page(spd, page, &flen, poff, skb, linear, sk))
return 1;
__segment_seek(&page, &poff, &plen, flen);
@@ -1481,8 +1484,8 @@ static inline int __splice_segment(struct page *page, unsigned int poff,
* pipe is full or if we already spliced the requested length.
*/
static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset,
- unsigned int *len,
- struct splice_pipe_desc *spd)
+ unsigned int *len, struct splice_pipe_desc *spd,
+ struct sock *sk)
{
int seg;
@@ -1492,7 +1495,7 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset,
if (__splice_segment(virt_to_page(skb->data),
(unsigned long) skb->data & (PAGE_SIZE - 1),
skb_headlen(skb),
- offset, len, skb, spd, 1))
+ offset, len, skb, spd, 1, sk))
return 1;
/*
@@ -1502,7 +1505,7 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset,
const skb_frag_t *f = &skb_shinfo(skb)->frags[seg];
if (__splice_segment(f->page, f->page_offset, f->size,
- offset, len, skb, spd, 0))
+ offset, len, skb, spd, 0, sk))
return 1;
}
@@ -1528,12 +1531,13 @@ int skb_splice_bits(struct sk_buff *skb, unsigned int offset,
.ops = &sock_pipe_buf_ops,
.spd_release = sock_spd_release,
};
+ struct sock *sk = skb->sk;
/*
* __skb_splice_bits() only fails if the output has no room left,
* so no point in going over the frag_list for the error case.
*/
- if (__skb_splice_bits(skb, &offset, &tlen, &spd))
+ if (__skb_splice_bits(skb, &offset, &tlen, &spd, sk))
goto done;
else if (!tlen)
goto done;
@@ -1545,14 +1549,13 @@ int skb_splice_bits(struct sk_buff *skb, unsigned int offset,
struct sk_buff *list = skb_shinfo(skb)->frag_list;
for (; list && tlen; list = list->next) {
- if (__skb_splice_bits(list, &offset, &tlen, &spd))
+ if (__skb_splice_bits(list, &offset, &tlen, &spd, sk))
break;
}
}
done:
if (spd.nr_pages) {
- struct sock *sk = skb->sk;
int ret;
/*
@@ -2285,7 +2288,7 @@ unsigned int skb_seq_read(unsigned int consumed, const u8 **data,
next_skb:
block_limit = skb_headlen(st->cur_skb) + st->stepped_offset;
- if (abs_offset < block_limit) {
+ if (abs_offset < block_limit && !st->frag_data) {
*data = st->cur_skb->data + (abs_offset - st->stepped_offset);
return block_limit - abs_offset;
}
diff --git a/net/ipv4/Kconfig b/net/ipv4/Kconfig
index b2cf91e4cca..5b919f7b45d 100644
--- a/net/ipv4/Kconfig
+++ b/net/ipv4/Kconfig
@@ -407,8 +407,8 @@ config INET_XFRM_MODE_BEET
If unsure, say Y.
config INET_LRO
- tristate "Large Receive Offload (ipv4/tcp)"
-
+ bool "Large Receive Offload (ipv4/tcp)"
+ default y
---help---
Support for Large Receive Offload (ipv4/tcp).
diff --git a/net/ipv4/ipconfig.c b/net/ipv4/ipconfig.c
index 90d22ae0a41..88bf051d0cb 100644
--- a/net/ipv4/ipconfig.c
+++ b/net/ipv4/ipconfig.c
@@ -139,6 +139,8 @@ __be32 ic_servaddr = NONE; /* Boot server IP address */
__be32 root_server_addr = NONE; /* Address of NFS server */
u8 root_server_path[256] = { 0, }; /* Path to mount as root */
+u32 ic_dev_xid; /* Device under configuration */
+
/* vendor class identifier */
static char vendor_class_identifier[253] __initdata;
@@ -932,6 +934,13 @@ static int __init ic_bootp_recv(struct sk_buff *skb, struct net_device *dev, str
goto drop_unlock;
}
+ /* Is it a reply for the device we are configuring? */
+ if (b->xid != ic_dev_xid) {
+ if (net_ratelimit())
+ printk(KERN_ERR "DHCP/BOOTP: Ignoring delayed packet \n");
+ goto drop_unlock;
+ }
+
/* Parse extensions */
if (ext_len >= 4 &&
!memcmp(b->exten, ic_bootp_cookie, 4)) { /* Check magic cookie */
@@ -1115,6 +1124,9 @@ static int __init ic_dynamic(void)
get_random_bytes(&timeout, sizeof(timeout));
timeout = CONF_BASE_TIMEOUT + (timeout % (unsigned) CONF_TIMEOUT_RANDOM);
for (;;) {
+ /* Track the device we are configuring */
+ ic_dev_xid = d->xid;
+
#ifdef IPCONFIG_BOOTP
if (do_bootp && (d->able & IC_BOOTP))
ic_bootp_send_if(d, jiffies - start_jiffies);
diff --git a/net/ipv4/tcp.c b/net/ipv4/tcp.c
index 1d7f49c6f0c..7a0f0b27bf1 100644
--- a/net/ipv4/tcp.c
+++ b/net/ipv4/tcp.c
@@ -1321,6 +1321,7 @@ int tcp_recvmsg(struct kiocb *iocb, struct sock *sk, struct msghdr *msg,
struct task_struct *user_recv = NULL;
int copied_early = 0;
struct sk_buff *skb;
+ u32 urg_hole = 0;
lock_sock(sk);
@@ -1532,7 +1533,8 @@ do_prequeue:
}
}
}
- if ((flags & MSG_PEEK) && peek_seq != tp->copied_seq) {
+ if ((flags & MSG_PEEK) &&
+ (peek_seq - copied - urg_hole != tp->copied_seq)) {
if (net_ratelimit())
printk(KERN_DEBUG "TCP(%s:%d): Application bug, race in MSG_PEEK.\n",
current->comm, task_pid_nr(current));
@@ -1553,6 +1555,7 @@ do_prequeue:
if (!urg_offset) {
if (!sock_flag(sk, SOCK_URGINLINE)) {
++*seq;
+ urg_hole++;
offset++;
used--;
if (!used)
diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c
index c96a6bb2543..eec3e6f9956 100644
--- a/net/ipv4/tcp_input.c
+++ b/net/ipv4/tcp_input.c
@@ -597,16 +597,6 @@ static void tcp_event_data_recv(struct sock *sk, struct sk_buff *skb)
tcp_grow_window(sk, skb);
}
-static u32 tcp_rto_min(struct sock *sk)
-{
- struct dst_entry *dst = __sk_dst_get(sk);
- u32 rto_min = TCP_RTO_MIN;
-
- if (dst && dst_metric_locked(dst, RTAX_RTO_MIN))
- rto_min = dst_metric_rtt(dst, RTAX_RTO_MIN);
- return rto_min;
-}
-
/* Called to compute a smoothed rtt estimate. The data fed to this
* routine either comes from timestamps, or from segments that were
* known _not_ to have been retransmitted [see Karn/Partridge
diff --git a/net/ipv6/netfilter/ip6t_ipv6header.c b/net/ipv6/netfilter/ip6t_ipv6header.c
index 14e6724d567..91490ad9302 100644
--- a/net/ipv6/netfilter/ip6t_ipv6header.c
+++ b/net/ipv6/netfilter/ip6t_ipv6header.c
@@ -50,14 +50,14 @@ ipv6header_mt6(const struct sk_buff *skb, const struct xt_match_param *par)
struct ipv6_opt_hdr _hdr;
int hdrlen;
- /* Is there enough space for the next ext header? */
- if (len < (int)sizeof(struct ipv6_opt_hdr))
- return false;
/* No more exthdr -> evaluate */
if (nexthdr == NEXTHDR_NONE) {
temp |= MASK_NONE;
break;
}
+ /* Is there enough space for the next ext header? */
+ if (len < (int)sizeof(struct ipv6_opt_hdr))
+ return false;
/* ESP -> evaluate */
if (nexthdr == NEXTHDR_ESP) {
temp |= MASK_ESP;
diff --git a/net/mac80211/main.c b/net/mac80211/main.c
index fbcbed6cad0..14134193cd1 100644
--- a/net/mac80211/main.c
+++ b/net/mac80211/main.c
@@ -757,6 +757,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len,
local->hw.conf.long_frame_max_tx_count = 4;
local->hw.conf.short_frame_max_tx_count = 7;
local->hw.conf.radio_enabled = true;
+ local->user_power_level = -1;
INIT_LIST_HEAD(&local->interfaces);
mutex_init(&local->iflist_mtx);
@@ -909,6 +910,13 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
if (result < 0)
goto fail_sta_info;
+ result = ieee80211_wep_init(local);
+ if (result < 0) {
+ printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
+ wiphy_name(local->hw.wiphy), result);
+ goto fail_wep;
+ }
+
rtnl_lock();
result = dev_alloc_name(local->mdev, local->mdev->name);
if (result < 0)
@@ -930,14 +938,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
goto fail_rate;
}
- result = ieee80211_wep_init(local);
-
- if (result < 0) {
- printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n",
- wiphy_name(local->hw.wiphy), result);
- goto fail_wep;
- }
-
/* add one default STA interface if supported */
if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION)) {
result = ieee80211_if_add(local, "wlan%d", NULL,
@@ -967,13 +967,13 @@ int ieee80211_register_hw(struct ieee80211_hw *hw)
return 0;
-fail_wep:
- rate_control_deinitialize(local);
fail_rate:
unregister_netdevice(local->mdev);
local->mdev = NULL;
fail_dev:
rtnl_unlock();
+ ieee80211_wep_free(local);
+fail_wep:
sta_info_stop(local);
fail_sta_info:
debugfs_hw_del(local);
diff --git a/net/mac80211/rc80211_minstrel.c b/net/mac80211/rc80211_minstrel.c
index 3824990d340..d9233ec5061 100644
--- a/net/mac80211/rc80211_minstrel.c
+++ b/net/mac80211/rc80211_minstrel.c
@@ -476,8 +476,8 @@ minstrel_alloc_sta(void *priv, struct ieee80211_sta *sta, gfp_t gfp)
return NULL;
for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
- sband = hw->wiphy->bands[hw->conf.channel->band];
- if (sband->n_bitrates > max_rates)
+ sband = hw->wiphy->bands[i];
+ if (sband && sband->n_bitrates > max_rates)
max_rates = sband->n_bitrates;
}
diff --git a/net/mac80211/rc80211_pid_algo.c b/net/mac80211/rc80211_pid_algo.c
index b16801cde06..8bef9a1262f 100644
--- a/net/mac80211/rc80211_pid_algo.c
+++ b/net/mac80211/rc80211_pid_algo.c
@@ -317,13 +317,44 @@ rate_control_pid_rate_init(void *priv, struct ieee80211_supported_band *sband,
struct ieee80211_sta *sta, void *priv_sta)
{
struct rc_pid_sta_info *spinfo = priv_sta;
+ struct rc_pid_info *pinfo = priv;
+ struct rc_pid_rateinfo *rinfo = pinfo->rinfo;
struct sta_info *si;
+ int i, j, tmp;
+ bool s;
/* TODO: This routine should consider using RSSI from previous packets
* as we need to have IEEE 802.1X auth succeed immediately after assoc..
* Until that method is implemented, we will use the lowest supported
* rate as a workaround. */
+ /* Sort the rates. This is optimized for the most common case (i.e.
+ * almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed
+ * mapping too. */
+ for (i = 0; i < sband->n_bitrates; i++) {
+ rinfo[i].index = i;
+ rinfo[i].rev_index = i;
+ if (RC_PID_FAST_START)
+ rinfo[i].diff = 0;
+ else
+ rinfo[i].diff = i * pinfo->norm_offset;
+ }
+ for (i = 1; i < sband->n_bitrates; i++) {
+ s = 0;
+ for (j = 0; j < sband->n_bitrates - i; j++)
+ if (unlikely(sband->bitrates[rinfo[j].index].bitrate >
+ sband->bitrates[rinfo[j + 1].index].bitrate)) {
+ tmp = rinfo[j].index;
+ rinfo[j].index = rinfo[j + 1].index;
+ rinfo[j + 1].index = tmp;
+ rinfo[rinfo[j].index].rev_index = j;
+ rinfo[rinfo[j + 1].index].rev_index = j + 1;
+ s = 1;
+ }
+ if (!s)
+ break;
+ }
+
spinfo->txrate_idx = rate_lowest_index(sband, sta);
/* HACK */
si = container_of(sta, struct sta_info, sta);
@@ -336,21 +367,22 @@ static void *rate_control_pid_alloc(struct ieee80211_hw *hw,
struct rc_pid_info *pinfo;
struct rc_pid_rateinfo *rinfo;
struct ieee80211_supported_band *sband;
- int i, j, tmp;
- bool s;
+ int i, max_rates = 0;
#ifdef CONFIG_MAC80211_DEBUGFS
struct rc_pid_debugfs_entries *de;
#endif
- sband = hw->wiphy->bands[hw->conf.channel->band];
-
pinfo = kmalloc(sizeof(*pinfo), GFP_ATOMIC);
if (!pinfo)
return NULL;
- /* We can safely assume that sband won't change unless we get
- * reinitialized. */
- rinfo = kmalloc(sizeof(*rinfo) * sband->n_bitrates, GFP_ATOMIC);
+ for (i = 0; i < IEEE80211_NUM_BANDS; i++) {
+ sband = hw->wiphy->bands[i];
+ if (sband && sband->n_bitrates > max_rates)
+ max_rates = sband->n_bitrates;
+ }
+
+ rinfo = kmalloc(sizeof(*rinfo) * max_rates, GFP_ATOMIC);
if (!rinfo) {
kfree(pinfo);
return NULL;
@@ -368,33 +400,6 @@ static void *rate_control_pid_alloc(struct ieee80211_hw *hw,
pinfo->rinfo = rinfo;
pinfo->oldrate = 0;
- /* Sort the rates. This is optimized for the most common case (i.e.
- * almost-sorted CCK+OFDM rates). Kind of bubble-sort with reversed
- * mapping too. */
- for (i = 0; i < sband->n_bitrates; i++) {
- rinfo[i].index = i;
- rinfo[i].rev_index = i;
- if (RC_PID_FAST_START)
- rinfo[i].diff = 0;
- else
- rinfo[i].diff = i * pinfo->norm_offset;
- }
- for (i = 1; i < sband->n_bitrates; i++) {
- s = 0;
- for (j = 0; j < sband->n_bitrates - i; j++)
- if (unlikely(sband->bitrates[rinfo[j].index].bitrate >
- sband->bitrates[rinfo[j + 1].index].bitrate)) {
- tmp = rinfo[j].index;
- rinfo[j].index = rinfo[j + 1].index;
- rinfo[j + 1].index = tmp;
- rinfo[rinfo[j].index].rev_index = j;
- rinfo[rinfo[j + 1].index].rev_index = j + 1;
- s = 1;
- }
- if (!s)
- break;
- }
-
#ifdef CONFIG_MAC80211_DEBUGFS
de = &pinfo->dentries;
de->target = debugfs_create_u32("target_pf", S_IRUSR | S_IWUSR,
diff --git a/net/mac80211/tx.c b/net/mac80211/tx.c
index 3fb04a86444..63656266d56 100644
--- a/net/mac80211/tx.c
+++ b/net/mac80211/tx.c
@@ -772,7 +772,7 @@ ieee80211_tx_h_fragment(struct ieee80211_tx_data *tx)
hdrlen = ieee80211_hdrlen(hdr->frame_control);
/* internal error, why is TX_FRAGMENTED set? */
- if (WARN_ON(skb->len <= frag_threshold))
+ if (WARN_ON(skb->len + FCS_LEN <= frag_threshold))
return TX_DROP;
/*
diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig
index 881203c4a14..cb3ad741ebf 100644
--- a/net/netfilter/Kconfig
+++ b/net/netfilter/Kconfig
@@ -837,6 +837,7 @@ config NETFILTER_XT_MATCH_SOCKET
depends on NETFILTER_TPROXY
depends on NETFILTER_XTABLES
depends on NETFILTER_ADVANCED
+ depends on !NF_CONNTRACK || NF_CONNTRACK
select NF_DEFRAG_IPV4
help
This option adds a `socket' match, which can be used to match
diff --git a/net/netfilter/ipvs/ip_vs_conn.c b/net/netfilter/ipvs/ip_vs_conn.c
index 60aba45023f..77bfdfeb966 100644
--- a/net/netfilter/ipvs/ip_vs_conn.c
+++ b/net/netfilter/ipvs/ip_vs_conn.c
@@ -260,7 +260,10 @@ struct ip_vs_conn *ip_vs_ct_in_get
list_for_each_entry(cp, &ip_vs_conn_tab[hash], c_list) {
if (cp->af == af &&
ip_vs_addr_equal(af, s_addr, &cp->caddr) &&
- ip_vs_addr_equal(af, d_addr, &cp->vaddr) &&
+ /* protocol should only be IPPROTO_IP if
+ * d_addr is a fwmark */
+ ip_vs_addr_equal(protocol == IPPROTO_IP ? AF_UNSPEC : af,
+ d_addr, &cp->vaddr) &&
s_port == cp->cport && d_port == cp->vport &&
cp->flags & IP_VS_CONN_F_TEMPLATE &&
protocol == cp->protocol) {
@@ -698,7 +701,9 @@ ip_vs_conn_new(int af, int proto, const union nf_inet_addr *caddr, __be16 cport,
cp->cport = cport;
ip_vs_addr_copy(af, &cp->vaddr, vaddr);
cp->vport = vport;
- ip_vs_addr_copy(af, &cp->daddr, daddr);
+ /* proto should only be IPPROTO_IP if d_addr is a fwmark */
+ ip_vs_addr_copy(proto == IPPROTO_IP ? AF_UNSPEC : af,
+ &cp->daddr, daddr);
cp->dport = dport;
cp->flags = flags;
spin_lock_init(&cp->lock);
diff --git a/net/netfilter/ipvs/ip_vs_core.c b/net/netfilter/ipvs/ip_vs_core.c
index cb3e031335e..8dddb17a947 100644
--- a/net/netfilter/ipvs/ip_vs_core.c
+++ b/net/netfilter/ipvs/ip_vs_core.c
@@ -278,7 +278,7 @@ ip_vs_sched_persist(struct ip_vs_service *svc,
*/
if (svc->fwmark) {
union nf_inet_addr fwmark = {
- .all = { 0, 0, 0, htonl(svc->fwmark) }
+ .ip = htonl(svc->fwmark)
};
ct = ip_vs_ct_in_get(svc->af, IPPROTO_IP, &snet, 0,
@@ -306,7 +306,7 @@ ip_vs_sched_persist(struct ip_vs_service *svc,
*/
if (svc->fwmark) {
union nf_inet_addr fwmark = {
- .all = { 0, 0, 0, htonl(svc->fwmark) }
+ .ip = htonl(svc->fwmark)
};
ct = ip_vs_conn_new(svc->af, IPPROTO_IP,
diff --git a/net/netfilter/nf_conntrack_netlink.c b/net/netfilter/nf_conntrack_netlink.c
index f13fc57e1ec..c523f0b8cee 100644
--- a/net/netfilter/nf_conntrack_netlink.c
+++ b/net/netfilter/nf_conntrack_netlink.c
@@ -1186,28 +1186,6 @@ ctnetlink_change_conntrack(struct nf_conn *ct, struct nlattr *cda[])
return 0;
}
-static inline void
-ctnetlink_event_report(struct nf_conn *ct, u32 pid, int report)
-{
- unsigned int events = 0;
-
- if (test_bit(IPS_EXPECTED_BIT, &ct->status))
- events |= IPCT_RELATED;
- else
- events |= IPCT_NEW;
-
- nf_conntrack_event_report(IPCT_STATUS |
- IPCT_HELPER |
- IPCT_REFRESH |
- IPCT_PROTOINFO |
- IPCT_NATSEQADJ |
- IPCT_MARK |
- events,
- ct,
- pid,
- report);
-}
-
static struct nf_conn *
ctnetlink_create_conntrack(struct nlattr *cda[],
struct nf_conntrack_tuple *otuple,
@@ -1373,6 +1351,7 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
err = -ENOENT;
if (nlh->nlmsg_flags & NLM_F_CREATE) {
struct nf_conn *ct;
+ enum ip_conntrack_events events;
ct = ctnetlink_create_conntrack(cda, &otuple,
&rtuple, u3);
@@ -1383,9 +1362,18 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
err = 0;
nf_conntrack_get(&ct->ct_general);
spin_unlock_bh(&nf_conntrack_lock);
- ctnetlink_event_report(ct,
- NETLINK_CB(skb).pid,
- nlmsg_report(nlh));
+ if (test_bit(IPS_EXPECTED_BIT, &ct->status))
+ events = IPCT_RELATED;
+ else
+ events = IPCT_NEW;
+
+ nf_conntrack_event_report(IPCT_STATUS |
+ IPCT_HELPER |
+ IPCT_PROTOINFO |
+ IPCT_NATSEQADJ |
+ IPCT_MARK | events,
+ ct, NETLINK_CB(skb).pid,
+ nlmsg_report(nlh));
nf_ct_put(ct);
} else
spin_unlock_bh(&nf_conntrack_lock);
@@ -1404,9 +1392,13 @@ ctnetlink_new_conntrack(struct sock *ctnl, struct sk_buff *skb,
if (err == 0) {
nf_conntrack_get(&ct->ct_general);
spin_unlock_bh(&nf_conntrack_lock);
- ctnetlink_event_report(ct,
- NETLINK_CB(skb).pid,
- nlmsg_report(nlh));
+ nf_conntrack_event_report(IPCT_STATUS |
+ IPCT_HELPER |
+ IPCT_PROTOINFO |
+ IPCT_NATSEQADJ |
+ IPCT_MARK,
+ ct, NETLINK_CB(skb).pid,
+ nlmsg_report(nlh));
nf_ct_put(ct);
} else
spin_unlock_bh(&nf_conntrack_lock);
diff --git a/net/netfilter/xt_cluster.c b/net/netfilter/xt_cluster.c
index 6c4847662b8..69a639f3540 100644
--- a/net/netfilter/xt_cluster.c
+++ b/net/netfilter/xt_cluster.c
@@ -135,7 +135,13 @@ static bool xt_cluster_mt_checkentry(const struct xt_mtchk_param *par)
{
struct xt_cluster_match_info *info = par->matchinfo;
- if (info->node_mask >= (1 << info->total_nodes)) {
+ if (info->total_nodes > XT_CLUSTER_NODES_MAX) {
+ printk(KERN_ERR "xt_cluster: you have exceeded the maximum "
+ "number of cluster nodes (%u > %u)\n",
+ info->total_nodes, XT_CLUSTER_NODES_MAX);
+ return false;
+ }
+ if (info->node_mask >= (1ULL << info->total_nodes)) {
printk(KERN_ERR "xt_cluster: this node mask cannot be "
"higher than the total number of nodes\n");
return false;
diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c
index 173fcc4b050..0759f32e9dc 100644
--- a/net/sched/cls_api.c
+++ b/net/sched/cls_api.c
@@ -254,7 +254,7 @@ replay:
}
tp->ops = tp_ops;
tp->protocol = protocol;
- tp->prio = nprio ? : tcf_auto_prio(*back);
+ tp->prio = nprio ? : TC_H_MAJ(tcf_auto_prio(*back));
tp->q = q;
tp->classify = tp_ops->classify;
tp->classid = parent;
diff --git a/net/sched/sch_fifo.c b/net/sched/sch_fifo.c
index 92cfc9d7e3b..69188e8358b 100644
--- a/net/sched/sch_fifo.c
+++ b/net/sched/sch_fifo.c
@@ -51,7 +51,7 @@ static int fifo_init(struct Qdisc *sch, struct nlattr *opt)
u32 limit = qdisc_dev(sch)->tx_queue_len ? : 1;
if (sch->ops == &bfifo_qdisc_ops)
- limit *= qdisc_dev(sch)->mtu;
+ limit *= psched_mtu(qdisc_dev(sch));
q->limit = limit;
} else {
diff --git a/net/sched/sch_teql.c b/net/sched/sch_teql.c
index ec697cebb63..3b641829723 100644
--- a/net/sched/sch_teql.c
+++ b/net/sched/sch_teql.c
@@ -303,6 +303,8 @@ restart:
switch (teql_resolve(skb, skb_res, slave)) {
case 0:
if (__netif_tx_trylock(slave_txq)) {
+ unsigned int length = qdisc_pkt_len(skb);
+
if (!netif_tx_queue_stopped(slave_txq) &&
!netif_tx_queue_frozen(slave_txq) &&
slave_ops->ndo_start_xmit(skb, slave) == 0) {
@@ -310,8 +312,7 @@ restart:
master->slaves = NEXT_SLAVE(q);
netif_wake_queue(dev);
master->stats.tx_packets++;
- master->stats.tx_bytes +=
- qdisc_pkt_len(skb);
+ master->stats.tx_bytes += length;
return 0;
}
__netif_tx_unlock(slave_txq);
diff --git a/net/sunrpc/xprt.c b/net/sunrpc/xprt.c
index a0bfe53f162..06ca058572f 100644
--- a/net/sunrpc/xprt.c
+++ b/net/sunrpc/xprt.c
@@ -672,10 +672,8 @@ xprt_init_autodisconnect(unsigned long data)
if (test_and_set_bit(XPRT_LOCKED, &xprt->state))
goto out_abort;
spin_unlock(&xprt->transport_lock);
- if (xprt_connecting(xprt))
- xprt_release_write(xprt, NULL);
- else
- queue_work(rpciod_workqueue, &xprt->task_cleanup);
+ set_bit(XPRT_CONNECTION_CLOSE, &xprt->state);
+ queue_work(rpciod_workqueue, &xprt->task_cleanup);
return;
out_abort:
spin_unlock(&xprt->transport_lock);
diff --git a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
index 629a28764da..42a6f9f2028 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_recvfrom.c
@@ -265,7 +265,7 @@ static int fast_reg_read_chunks(struct svcxprt_rdma *xprt,
frmr->page_list->page_list[page_no] =
ib_dma_map_single(xprt->sc_cm_id->device,
page_address(rqstp->rq_arg.pages[page_no]),
- PAGE_SIZE, DMA_TO_DEVICE);
+ PAGE_SIZE, DMA_FROM_DEVICE);
if (ib_dma_mapping_error(xprt->sc_cm_id->device,
frmr->page_list->page_list[page_no]))
goto fatal_err;
diff --git a/net/sunrpc/xprtrdma/svc_rdma_sendto.c b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
index 6c26a675435..8b510c5e877 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_sendto.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_sendto.c
@@ -183,6 +183,7 @@ static int fast_reg_xdr(struct svcxprt_rdma *xprt,
fatal_err:
printk("svcrdma: Error fast registering memory for xprt %p\n", xprt);
+ vec->frmr = NULL;
svc_rdma_put_frmr(xprt, frmr);
return -EIO;
}
@@ -516,6 +517,7 @@ static int send_reply(struct svcxprt_rdma *rdma,
"svcrdma: could not post a receive buffer, err=%d."
"Closing transport %p.\n", ret, rdma);
set_bit(XPT_CLOSE, &rdma->sc_xprt.xpt_flags);
+ svc_rdma_put_frmr(rdma, vec->frmr);
svc_rdma_put_context(ctxt, 0);
return -ENOTCONN;
}
@@ -606,6 +608,7 @@ static int send_reply(struct svcxprt_rdma *rdma,
return 0;
err:
+ svc_rdma_unmap_dma(ctxt);
svc_rdma_put_frmr(rdma, vec->frmr);
svc_rdma_put_context(ctxt, 1);
return -EIO;
diff --git a/net/sunrpc/xprtrdma/svc_rdma_transport.c b/net/sunrpc/xprtrdma/svc_rdma_transport.c
index 3d810e7df3f..4b0c2fa15e0 100644
--- a/net/sunrpc/xprtrdma/svc_rdma_transport.c
+++ b/net/sunrpc/xprtrdma/svc_rdma_transport.c
@@ -520,8 +520,9 @@ int svc_rdma_post_recv(struct svcxprt_rdma *xprt)
svc_xprt_get(&xprt->sc_xprt);
ret = ib_post_recv(xprt->sc_qp, &recv_wr, &bad_recv_wr);
if (ret) {
- svc_xprt_put(&xprt->sc_xprt);
+ svc_rdma_unmap_dma(ctxt);
svc_rdma_put_context(ctxt, 1);
+ svc_xprt_put(&xprt->sc_xprt);
}
return ret;
diff --git a/net/sunrpc/xprtsock.c b/net/sunrpc/xprtsock.c
index d40ff50887a..e1859614601 100644
--- a/net/sunrpc/xprtsock.c
+++ b/net/sunrpc/xprtsock.c
@@ -807,6 +807,9 @@ static void xs_reset_transport(struct sock_xprt *transport)
*
* This is used when all requests are complete; ie, no DRC state remains
* on the server we want to save.
+ *
+ * The caller _must_ be holding XPRT_LOCKED in order to avoid issues with
+ * xs_reset_transport() zeroing the socket from underneath a writer.
*/
static void xs_close(struct rpc_xprt *xprt)
{
@@ -824,6 +827,14 @@ static void xs_close(struct rpc_xprt *xprt)
xprt_disconnect_done(xprt);
}
+static void xs_tcp_close(struct rpc_xprt *xprt)
+{
+ if (test_and_clear_bit(XPRT_CONNECTION_CLOSE, &xprt->state))
+ xs_close(xprt);
+ else
+ xs_tcp_shutdown(xprt);
+}
+
/**
* xs_destroy - prepare to shutdown a transport
* @xprt: doomed transport
@@ -1772,6 +1783,15 @@ static void xs_tcp_setup_socket(struct rpc_xprt *xprt,
xprt, -status, xprt_connected(xprt),
sock->sk->sk_state);
switch (status) {
+ default:
+ printk("%s: connect returned unhandled error %d\n",
+ __func__, status);
+ case -EADDRNOTAVAIL:
+ /* We're probably in TIME_WAIT. Get rid of existing socket,
+ * and retry
+ */
+ set_bit(XPRT_CONNECTION_CLOSE, &xprt->state);
+ xprt_force_disconnect(xprt);
case -ECONNREFUSED:
case -ECONNRESET:
case -ENETUNREACH:
@@ -1782,10 +1802,6 @@ static void xs_tcp_setup_socket(struct rpc_xprt *xprt,
xprt_clear_connecting(xprt);
return;
}
- /* get rid of existing socket, and retry */
- xs_tcp_shutdown(xprt);
- printk("%s: connect returned unhandled error %d\n",
- __func__, status);
out_eagain:
status = -EAGAIN;
out:
@@ -1994,7 +2010,7 @@ static struct rpc_xprt_ops xs_tcp_ops = {
.buf_free = rpc_free,
.send_request = xs_tcp_send_request,
.set_retrans_timeout = xprt_set_retrans_timeout_def,
- .close = xs_tcp_shutdown,
+ .close = xs_tcp_close,
.destroy = xs_destroy,
.print_stats = xs_tcp_print_stats,
};
diff --git a/net/wimax/op-msg.c b/net/wimax/op-msg.c
index 5d149c1b5f0..9ad4d893a56 100644
--- a/net/wimax/op-msg.c
+++ b/net/wimax/op-msg.c
@@ -149,7 +149,8 @@ struct sk_buff *wimax_msg_alloc(struct wimax_dev *wimax_dev,
}
result = nla_put(skb, WIMAX_GNL_MSG_DATA, size, msg);
if (result < 0) {
- dev_err(dev, "no memory to add payload in attribute\n");
+ dev_err(dev, "no memory to add payload (msg %p size %zu) in "
+ "attribute: %d\n", msg, size, result);
goto error_nla_put;
}
genlmsg_end(skb, genl_msg);
@@ -299,10 +300,10 @@ int wimax_msg(struct wimax_dev *wimax_dev, const char *pipe_name,
struct sk_buff *skb;
skb = wimax_msg_alloc(wimax_dev, pipe_name, buf, size, gfp_flags);
- if (skb == NULL)
- goto error_msg_new;
- result = wimax_msg_send(wimax_dev, skb);
-error_msg_new:
+ if (IS_ERR(skb))
+ result = PTR_ERR(skb);
+ else
+ result = wimax_msg_send(wimax_dev, skb);
return result;
}
EXPORT_SYMBOL_GPL(wimax_msg);
diff --git a/net/wimax/stack.c b/net/wimax/stack.c
index a0ee76b5251..933e1422b09 100644
--- a/net/wimax/stack.c
+++ b/net/wimax/stack.c
@@ -338,8 +338,21 @@ out:
*/
void wimax_state_change(struct wimax_dev *wimax_dev, enum wimax_st new_state)
{
+ /*
+ * A driver cannot take the wimax_dev out of the
+ * __WIMAX_ST_NULL state unless by calling wimax_dev_add(). If
+ * the wimax_dev's state is still NULL, we ignore any request
+ * to change its state because it means it hasn't been yet
+ * registered.
+ *
+ * There is no need to complain about it, as routines that
+ * call this might be shared from different code paths that
+ * are called before or after wimax_dev_add() has done its
+ * job.
+ */
mutex_lock(&wimax_dev->mutex);
- __wimax_state_change(wimax_dev, new_state);
+ if (wimax_dev->state > __WIMAX_ST_NULL)
+ __wimax_state_change(wimax_dev, new_state);
mutex_unlock(&wimax_dev->mutex);
return;
}
@@ -376,7 +389,7 @@ EXPORT_SYMBOL_GPL(wimax_state_get);
void wimax_dev_init(struct wimax_dev *wimax_dev)
{
INIT_LIST_HEAD(&wimax_dev->id_table_node);
- __wimax_state_set(wimax_dev, WIMAX_ST_UNINITIALIZED);
+ __wimax_state_set(wimax_dev, __WIMAX_ST_NULL);
mutex_init(&wimax_dev->mutex);
mutex_init(&wimax_dev->mutex_reset);
}
diff --git a/net/wireless/reg.c b/net/wireless/reg.c
index 6c1993d9990..08265ca1578 100644
--- a/net/wireless/reg.c
+++ b/net/wireless/reg.c
@@ -907,6 +907,7 @@ EXPORT_SYMBOL(freq_reg_info);
int freq_reg_info(struct wiphy *wiphy, u32 center_freq, u32 *bandwidth,
const struct ieee80211_reg_rule **reg_rule)
{
+ assert_cfg80211_lock();
return freq_reg_info_regd(wiphy, center_freq,
bandwidth, reg_rule, NULL);
}
@@ -1133,7 +1134,8 @@ static bool reg_is_world_roaming(struct wiphy *wiphy)
if (is_world_regdom(cfg80211_regdomain->alpha2) ||
(wiphy->regd && is_world_regdom(wiphy->regd->alpha2)))
return true;
- if (last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE &&
+ if (last_request &&
+ last_request->initiator != NL80211_REGDOM_SET_BY_COUNTRY_IE &&
wiphy->custom_regulatory)
return true;
return false;
@@ -1142,6 +1144,12 @@ static bool reg_is_world_roaming(struct wiphy *wiphy)
/* Reap the advantages of previously found beacons */
static void reg_process_beacons(struct wiphy *wiphy)
{
+ /*
+ * Means we are just firing up cfg80211, so no beacons would
+ * have been processed yet.
+ */
+ if (!last_request)
+ return;
if (!reg_is_world_roaming(wiphy))
return;
wiphy_update_beacon_reg(wiphy);
@@ -1176,6 +1184,8 @@ static void handle_channel_custom(struct wiphy *wiphy,
struct ieee80211_supported_band *sband;
struct ieee80211_channel *chan;
+ assert_cfg80211_lock();
+
sband = wiphy->bands[band];
BUG_ON(chan_idx >= sband->n_channels);
chan = &sband->channels[chan_idx];
@@ -1214,10 +1224,13 @@ void wiphy_apply_custom_regulatory(struct wiphy *wiphy,
const struct ieee80211_regdomain *regd)
{
enum ieee80211_band band;
+
+ mutex_lock(&cfg80211_mutex);
for (band = 0; band < IEEE80211_NUM_BANDS; band++) {
if (wiphy->bands[band])
handle_band_custom(wiphy, band, regd);
}
+ mutex_unlock(&cfg80211_mutex);
}
EXPORT_SYMBOL(wiphy_apply_custom_regulatory);
@@ -1423,7 +1436,7 @@ new_request:
return call_crda(last_request->alpha2);
}
-/* This currently only processes user and driver regulatory hints */
+/* This processes *all* regulatory hints */
static void reg_process_hint(struct regulatory_request *reg_request)
{
int r = 0;
diff --git a/net/wireless/scan.c b/net/wireless/scan.c
index 2ae65b39b52..1f260c40b6c 100644
--- a/net/wireless/scan.c
+++ b/net/wireless/scan.c
@@ -395,6 +395,7 @@ cfg80211_bss_update(struct cfg80211_registered_device *dev,
memcpy(ies, res->pub.information_elements, ielen);
found->ies_allocated = true;
found->pub.information_elements = ies;
+ found->pub.len_information_elements = ielen;
}
}
}
diff --git a/scripts/Makefile b/scripts/Makefile
index aafdf064fee..9dd5b25a1d5 100644
--- a/scripts/Makefile
+++ b/scripts/Makefile
@@ -21,6 +21,7 @@ hostprogs-y += unifdef
subdir-$(CONFIG_MODVERSIONS) += genksyms
subdir-y += mod
subdir-$(CONFIG_SECURITY_SELINUX) += selinux
+subdir-$(CONFIG_DTC) += dtc
# Let clean descend into subdirs
subdir- += basic kconfig package selinux
diff --git a/scripts/dtc/Makefile b/scripts/dtc/Makefile
new file mode 100644
index 00000000000..01cdb36fc58
--- /dev/null
+++ b/scripts/dtc/Makefile
@@ -0,0 +1,54 @@
+# scripts/dtc makefile
+
+hostprogs-y := dtc
+always := $(hostprogs-y)
+
+dtc-objs := dtc.o flattree.o fstree.o data.o livetree.o treesource.o \
+ srcpos.o checks.o
+dtc-objs += dtc-lexer.lex.o dtc-parser.tab.o
+
+# Source files need to get at the userspace version of libfdt_env.h to compile
+
+HOSTCFLAGS_DTC := -I$(src) -I$(src)/libfdt
+
+HOSTCFLAGS_checks.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_data.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_dtc.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_flattree.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_fstree.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_livetree.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_srcpos.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_treesource.o := $(HOSTCFLAGS_DTC)
+
+HOSTCFLAGS_dtc-lexer.lex.o := $(HOSTCFLAGS_DTC)
+HOSTCFLAGS_dtc-parser.tab.o := $(HOSTCFLAGS_DTC)
+
+# dependencies on generated files need to be listed explicitly
+$(obj)/dtc-parser.tab.o: $(obj)/dtc-parser.tab.c $(obj)/dtc-parser.tab.h
+$(obj)/dtc-lexer.lex.o: $(obj)/dtc-lexer.lex.c $(obj)/dtc-parser.tab.h
+
+targets += dtc-parser.tab.c dtc-lexer.lex.c
+
+clean-files += dtc-parser.tab.h
+
+# GENERATE_PARSER := 1 # Uncomment to rebuild flex/bison output
+
+ifdef GENERATE_PARSER
+
+BISON = bison
+FLEX = flex
+
+quiet_cmd_bison = BISON $@
+ cmd_bison = $(BISON) -o$@ -d $<; cp $@ $@_shipped
+quiet_cmd_flex = FLEX $@
+ cmd_flex = $(FLEX) -o$@ $<; cp $@ $@_shipped
+
+$(obj)/dtc-parser.tab.c: $(src)/dtc-parser.y FORCE
+ $(call if_changed,bison)
+
+$(obj)/dtc-parser.tab.h: $(obj)/dtc-parser.tab.c
+
+$(obj)/dtc-lexer.lex.c: $(src)/dtc-lexer.l FORCE
+ $(call if_changed,flex)
+
+endif
diff --git a/arch/powerpc/boot/dtc-src/Makefile.dtc b/scripts/dtc/Makefile.dtc
index 6ddf9ecac66..6ddf9ecac66 100644
--- a/arch/powerpc/boot/dtc-src/Makefile.dtc
+++ b/scripts/dtc/Makefile.dtc
diff --git a/arch/powerpc/boot/dtc-src/checks.c b/scripts/dtc/checks.c
index 95485796f25..95485796f25 100644
--- a/arch/powerpc/boot/dtc-src/checks.c
+++ b/scripts/dtc/checks.c
diff --git a/arch/powerpc/boot/dtc-src/data.c b/scripts/dtc/data.c
index dd2e3d39d4c..dd2e3d39d4c 100644
--- a/arch/powerpc/boot/dtc-src/data.c
+++ b/scripts/dtc/data.c
diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.l b/scripts/dtc/dtc-lexer.l
index 44dbfd3f097..44dbfd3f097 100644
--- a/arch/powerpc/boot/dtc-src/dtc-lexer.l
+++ b/scripts/dtc/dtc-lexer.l
diff --git a/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped b/scripts/dtc/dtc-lexer.lex.c_shipped
index ac392cb040f..ac392cb040f 100644
--- a/arch/powerpc/boot/dtc-src/dtc-lexer.lex.c_shipped
+++ b/scripts/dtc/dtc-lexer.lex.c_shipped
diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped b/scripts/dtc/dtc-parser.tab.c_shipped
index 27129377e5d..27129377e5d 100644
--- a/arch/powerpc/boot/dtc-src/dtc-parser.tab.c_shipped
+++ b/scripts/dtc/dtc-parser.tab.c_shipped
diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped b/scripts/dtc/dtc-parser.tab.h_shipped
index ba99100d55c..ba99100d55c 100644
--- a/arch/powerpc/boot/dtc-src/dtc-parser.tab.h_shipped
+++ b/scripts/dtc/dtc-parser.tab.h_shipped
diff --git a/arch/powerpc/boot/dtc-src/dtc-parser.y b/scripts/dtc/dtc-parser.y
index b2ab562420e..b2ab562420e 100644
--- a/arch/powerpc/boot/dtc-src/dtc-parser.y
+++ b/scripts/dtc/dtc-parser.y
diff --git a/arch/powerpc/boot/dtc-src/dtc.c b/scripts/dtc/dtc.c
index d8fd43b4ac1..d8fd43b4ac1 100644
--- a/arch/powerpc/boot/dtc-src/dtc.c
+++ b/scripts/dtc/dtc.c
diff --git a/arch/powerpc/boot/dtc-src/dtc.h b/scripts/dtc/dtc.h
index 08d54c87008..08d54c87008 100644
--- a/arch/powerpc/boot/dtc-src/dtc.h
+++ b/scripts/dtc/dtc.h
diff --git a/arch/powerpc/boot/dtc-src/flattree.c b/scripts/dtc/flattree.c
index 76acd28c068..76acd28c068 100644
--- a/arch/powerpc/boot/dtc-src/flattree.c
+++ b/scripts/dtc/flattree.c
diff --git a/arch/powerpc/boot/dtc-src/fstree.c b/scripts/dtc/fstree.c
index 766b2694d93..766b2694d93 100644
--- a/arch/powerpc/boot/dtc-src/fstree.c
+++ b/scripts/dtc/fstree.c
diff --git a/arch/powerpc/boot/libfdt/Makefile.libfdt b/scripts/dtc/libfdt/Makefile.libfdt
index 6c42acfa21e..6c42acfa21e 100644
--- a/arch/powerpc/boot/libfdt/Makefile.libfdt
+++ b/scripts/dtc/libfdt/Makefile.libfdt
diff --git a/arch/powerpc/boot/libfdt/fdt.c b/scripts/dtc/libfdt/fdt.c
index 2acaec5923a..2acaec5923a 100644
--- a/arch/powerpc/boot/libfdt/fdt.c
+++ b/scripts/dtc/libfdt/fdt.c
diff --git a/arch/powerpc/boot/libfdt/fdt.h b/scripts/dtc/libfdt/fdt.h
index 48ccfd91000..48ccfd91000 100644
--- a/arch/powerpc/boot/libfdt/fdt.h
+++ b/scripts/dtc/libfdt/fdt.h
diff --git a/arch/powerpc/boot/libfdt/fdt_ro.c b/scripts/dtc/libfdt/fdt_ro.c
index fbbba44fcd0..fbbba44fcd0 100644
--- a/arch/powerpc/boot/libfdt/fdt_ro.c
+++ b/scripts/dtc/libfdt/fdt_ro.c
diff --git a/arch/powerpc/boot/libfdt/fdt_rw.c b/scripts/dtc/libfdt/fdt_rw.c
index 8e7ec4cb7bc..8e7ec4cb7bc 100644
--- a/arch/powerpc/boot/libfdt/fdt_rw.c
+++ b/scripts/dtc/libfdt/fdt_rw.c
diff --git a/arch/powerpc/boot/libfdt/fdt_strerror.c b/scripts/dtc/libfdt/fdt_strerror.c
index e6c3ceee8c5..e6c3ceee8c5 100644
--- a/arch/powerpc/boot/libfdt/fdt_strerror.c
+++ b/scripts/dtc/libfdt/fdt_strerror.c
diff --git a/arch/powerpc/boot/libfdt/fdt_sw.c b/scripts/dtc/libfdt/fdt_sw.c
index 698329e0cca..698329e0cca 100644
--- a/arch/powerpc/boot/libfdt/fdt_sw.c
+++ b/scripts/dtc/libfdt/fdt_sw.c
diff --git a/arch/powerpc/boot/libfdt/fdt_wip.c b/scripts/dtc/libfdt/fdt_wip.c
index a4652c6e787..a4652c6e787 100644
--- a/arch/powerpc/boot/libfdt/fdt_wip.c
+++ b/scripts/dtc/libfdt/fdt_wip.c
diff --git a/arch/powerpc/boot/libfdt/libfdt.h b/scripts/dtc/libfdt/libfdt.h
index ce80e4fb41b..ce80e4fb41b 100644
--- a/arch/powerpc/boot/libfdt/libfdt.h
+++ b/scripts/dtc/libfdt/libfdt.h
diff --git a/arch/powerpc/boot/dtc-src/libfdt_env.h b/scripts/dtc/libfdt/libfdt_env.h
index 449bf602daf..449bf602daf 100644
--- a/arch/powerpc/boot/dtc-src/libfdt_env.h
+++ b/scripts/dtc/libfdt/libfdt_env.h
diff --git a/arch/powerpc/boot/libfdt/libfdt_internal.h b/scripts/dtc/libfdt/libfdt_internal.h
index 46eb93e4af5..46eb93e4af5 100644
--- a/arch/powerpc/boot/libfdt/libfdt_internal.h
+++ b/scripts/dtc/libfdt/libfdt_internal.h
diff --git a/arch/powerpc/boot/dtc-src/livetree.c b/scripts/dtc/livetree.c
index 0ca3de550b3..0ca3de550b3 100644
--- a/arch/powerpc/boot/dtc-src/livetree.c
+++ b/scripts/dtc/livetree.c
diff --git a/arch/powerpc/boot/dtc-src/srcpos.c b/scripts/dtc/srcpos.c
index 9641b7628b4..9641b7628b4 100644
--- a/arch/powerpc/boot/dtc-src/srcpos.c
+++ b/scripts/dtc/srcpos.c
diff --git a/arch/powerpc/boot/dtc-src/srcpos.h b/scripts/dtc/srcpos.h
index e17c7c04db8..e17c7c04db8 100644
--- a/arch/powerpc/boot/dtc-src/srcpos.h
+++ b/scripts/dtc/srcpos.h
diff --git a/arch/powerpc/boot/dtc-src/treesource.c b/scripts/dtc/treesource.c
index ebeb6eb2790..ebeb6eb2790 100644
--- a/arch/powerpc/boot/dtc-src/treesource.c
+++ b/scripts/dtc/treesource.c
diff --git a/arch/powerpc/boot/dtc-src/version_gen.h b/scripts/dtc/version_gen.h
index 658ff42429d..658ff42429d 100644
--- a/arch/powerpc/boot/dtc-src/version_gen.h
+++ b/scripts/dtc/version_gen.h
diff --git a/scripts/kernel-doc b/scripts/kernel-doc
index 0f11870116d..3208a3a7e7f 100755
--- a/scripts/kernel-doc
+++ b/scripts/kernel-doc
@@ -1411,7 +1411,8 @@ sub dump_struct($$) {
my $file = shift;
my $nested;
- if ($x =~/(struct|union)\s+(\w+)\s*{(.*)}/) {
+ if ($x =~ /(struct|union)\s+(\w+)\s*{(.*)}/) {
+ #my $decl_type = $1;
$declaration_name = $2;
my $members = $3;
@@ -1420,8 +1421,8 @@ sub dump_struct($$) {
$nested = $1;
# ignore members marked private:
- $members =~ s/\/\*.*?private:.*?public:.*?\*\///gos;
- $members =~ s/\/\*.*?private:.*//gos;
+ $members =~ s/\/\*\s*private:.*?\/\*\s*public:.*?\*\///gos;
+ $members =~ s/\/\*\s*private:.*//gos;
# strip comments:
$members =~ s/\/\*.*?\*\///gos;
$nested =~ s/\/\*.*?\*\///gos;
diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c
index 8d46ea7d671..161b7846733 100644
--- a/scripts/mod/modpost.c
+++ b/scripts/mod/modpost.c
@@ -384,11 +384,19 @@ static int parse_elf(struct elf_info *info, const char *filename)
return 0;
}
/* Fix endianness in ELF header */
- hdr->e_shoff = TO_NATIVE(hdr->e_shoff);
- hdr->e_shstrndx = TO_NATIVE(hdr->e_shstrndx);
- hdr->e_shnum = TO_NATIVE(hdr->e_shnum);
- hdr->e_machine = TO_NATIVE(hdr->e_machine);
- hdr->e_type = TO_NATIVE(hdr->e_type);
+ hdr->e_type = TO_NATIVE(hdr->e_type);
+ hdr->e_machine = TO_NATIVE(hdr->e_machine);
+ hdr->e_version = TO_NATIVE(hdr->e_version);
+ hdr->e_entry = TO_NATIVE(hdr->e_entry);
+ hdr->e_phoff = TO_NATIVE(hdr->e_phoff);
+ hdr->e_shoff = TO_NATIVE(hdr->e_shoff);
+ hdr->e_flags = TO_NATIVE(hdr->e_flags);
+ hdr->e_ehsize = TO_NATIVE(hdr->e_ehsize);
+ hdr->e_phentsize = TO_NATIVE(hdr->e_phentsize);
+ hdr->e_phnum = TO_NATIVE(hdr->e_phnum);
+ hdr->e_shentsize = TO_NATIVE(hdr->e_shentsize);
+ hdr->e_shnum = TO_NATIVE(hdr->e_shnum);
+ hdr->e_shstrndx = TO_NATIVE(hdr->e_shstrndx);
sechdrs = (void *)hdr + hdr->e_shoff;
info->sechdrs = sechdrs;
@@ -402,13 +410,16 @@ static int parse_elf(struct elf_info *info, const char *filename)
/* Fix endianness in section headers */
for (i = 0; i < hdr->e_shnum; i++) {
- sechdrs[i].sh_type = TO_NATIVE(sechdrs[i].sh_type);
- sechdrs[i].sh_offset = TO_NATIVE(sechdrs[i].sh_offset);
- sechdrs[i].sh_size = TO_NATIVE(sechdrs[i].sh_size);
- sechdrs[i].sh_link = TO_NATIVE(sechdrs[i].sh_link);
- sechdrs[i].sh_name = TO_NATIVE(sechdrs[i].sh_name);
- sechdrs[i].sh_info = TO_NATIVE(sechdrs[i].sh_info);
- sechdrs[i].sh_addr = TO_NATIVE(sechdrs[i].sh_addr);
+ sechdrs[i].sh_name = TO_NATIVE(sechdrs[i].sh_name);
+ sechdrs[i].sh_type = TO_NATIVE(sechdrs[i].sh_type);
+ sechdrs[i].sh_flags = TO_NATIVE(sechdrs[i].sh_flags);
+ sechdrs[i].sh_addr = TO_NATIVE(sechdrs[i].sh_addr);
+ sechdrs[i].sh_offset = TO_NATIVE(sechdrs[i].sh_offset);
+ sechdrs[i].sh_size = TO_NATIVE(sechdrs[i].sh_size);
+ sechdrs[i].sh_link = TO_NATIVE(sechdrs[i].sh_link);
+ sechdrs[i].sh_info = TO_NATIVE(sechdrs[i].sh_info);
+ sechdrs[i].sh_addralign = TO_NATIVE(sechdrs[i].sh_addralign);
+ sechdrs[i].sh_entsize = TO_NATIVE(sechdrs[i].sh_entsize);
}
/* Find symbol table. */
for (i = 1; i < hdr->e_shnum; i++) {
@@ -716,41 +727,37 @@ int match(const char *sym, const char * const pat[])
/* sections that we do not want to do full section mismatch check on */
static const char *section_white_list[] =
- { ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL };
+{
+ ".comment*",
+ ".debug*",
+ ".mdebug*", /* alpha, score, mips etc. */
+ ".pdr", /* alpha, score, mips etc. */
+ ".stab*",
+ ".note*",
+ ".got*",
+ ".toc*",
+ NULL
+};
/*
- * Is this section one we do not want to check?
- * This is often debug sections.
- * If we are going to check this section then
- * test if section name ends with a dot and a number.
- * This is used to find sections where the linker have
- * appended a dot-number to make the name unique.
+ * This is used to find sections missing the SHF_ALLOC flag.
* The cause of this is often a section specified in assembler
- * without "ax" / "aw" and the same section used in .c
- * code where gcc add these.
+ * without "ax" / "aw".
*/
-static int check_section(const char *modname, const char *sec)
-{
- const char *e = sec + strlen(sec) - 1;
- if (match(sec, section_white_list))
- return 1;
-
- if (*e && isdigit(*e)) {
- /* consume all digits */
- while (*e && e != sec && isdigit(*e))
- e--;
- if (*e == '.' && !strstr(sec, ".linkonce")) {
- warn("%s (%s): unexpected section name.\n"
- "The (.[number]+) following section name are "
- "ld generated and not expected.\n"
- "Did you forget to use \"ax\"/\"aw\" "
- "in a .S file?\n"
- "Note that for example <linux/init.h> contains\n"
- "section definitions for use in .S files.\n\n",
- modname, sec);
- }
+static void check_section(const char *modname, struct elf_info *elf,
+ Elf_Shdr *sechdr)
+{
+ const char *sec = sech_name(elf, sechdr);
+
+ if (sechdr->sh_type == SHT_PROGBITS &&
+ !(sechdr->sh_flags & SHF_ALLOC) &&
+ !match(sec, section_white_list)) {
+ warn("%s (%s): unexpected non-allocatable section.\n"
+ "Did you forget to use \"ax\"/\"aw\" in a .S file?\n"
+ "Note that for example <linux/init.h> contains\n"
+ "section definitions for use in .S files.\n\n",
+ modname, sec);
}
- return 0;
}
@@ -928,8 +935,7 @@ static int section_mismatch(const char *fromsec, const char *tosec)
* *probe_one, *_console, *_timer
*
* Pattern 3:
- * Whitelist all refereces from .text.head to .init.data
- * Whitelist all refereces from .text.head to .init.text
+ * Whitelist all references from .head.text to any init section
*
* Pattern 4:
* Some symbols belong to init section but still it is ok to reference
@@ -1359,7 +1365,7 @@ static void section_rela(const char *modname, struct elf_info *elf,
fromsec = sech_name(elf, sechdr);
fromsec += strlen(".rela");
/* if from section (name) is know good then skip it */
- if (check_section(modname, fromsec))
+ if (match(fromsec, section_white_list))
return;
for (rela = start; rela < stop; rela++) {
@@ -1403,7 +1409,7 @@ static void section_rel(const char *modname, struct elf_info *elf,
fromsec = sech_name(elf, sechdr);
fromsec += strlen(".rel");
/* if from section (name) is know good then skip it */
- if (check_section(modname, fromsec))
+ if (match(fromsec, section_white_list))
return;
for (rel = start; rel < stop; rel++) {
@@ -1466,6 +1472,7 @@ static void check_sec_ref(struct module *mod, const char *modname,
/* Walk through all sections */
for (i = 0; i < elf->hdr->e_shnum; i++) {
+ check_section(modname, elf, &elf->sechdrs[i]);
/* We want to process only relocation sections and not .init */
if (sechdrs[i].sh_type == SHT_RELA)
section_rela(modname, elf, &elf->sechdrs[i]);
@@ -1990,6 +1997,7 @@ static void read_markers(const char *fname)
if (!mod->skip)
add_marker(mod, marker, fmt);
}
+ release_file(file, size);
return;
fail:
fatal("parse error in markers list file\n");
diff --git a/scripts/setlocalversion b/scripts/setlocalversion
index 47e75b69a2e..00790472f64 100755
--- a/scripts/setlocalversion
+++ b/scripts/setlocalversion
@@ -1,5 +1,13 @@
#!/bin/sh
-# Print additional version information for non-release trees.
+#
+# This scripts adds local version information from the version
+# control systems git, mercurial (hg) and subversion (svn).
+#
+# If something goes wrong, send a mail the kernel build mailinglist
+# (see MAINTAINERS) and CC Nico Schottelius
+# <nico-linuxsetlocalversion -at- schottelius.org>.
+#
+#
usage() {
echo "Usage: $0 [srctree]" >&2
@@ -10,10 +18,17 @@ cd "${1:-.}" || usage
# Check for git and a git repo.
if head=`git rev-parse --verify --short HEAD 2>/dev/null`; then
- # Do we have an untagged version?
- if git name-rev --tags HEAD | grep -E '^HEAD[[:space:]]+(.*~[0-9]*|undefined)$' > /dev/null; then
- if tag=`git describe 2>/dev/null`; then
- echo $tag | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+
+ # If we are at a tagged commit (like "v2.6.30-rc6"), we ignore it,
+ # because this version is defined in the top level Makefile.
+ if [ -z "`git describe --exact-match 2>/dev/null`" ]; then
+
+ # If we are past a tagged commit (like "v2.6.30-rc5-302-g72357d5"),
+ # we pretty print it.
+ if atag="`git describe 2>/dev/null`"; then
+ echo "$atag" | awk -F- '{printf("-%05d-%s", $(NF-1),$(NF))}'
+
+ # If we don't have a tag at all we print -g{commitish}.
else
printf '%s%s' -g $head
fi
diff --git a/scripts/tags.sh b/scripts/tags.sh
index 5bd8b1003d4..4a34ec591e8 100755
--- a/scripts/tags.sh
+++ b/scripts/tags.sh
@@ -164,10 +164,12 @@ case "$1" in
;;
"tags")
+ rm -f tags
xtags ctags
;;
"TAGS")
+ rm -f TAGS
xtags etags
;;
esac
diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c
index ba808ef6bab..2fcad7c33ea 100644
--- a/security/selinux/hooks.c
+++ b/security/selinux/hooks.c
@@ -3153,7 +3153,7 @@ static int selinux_file_send_sigiotask(struct task_struct *tsk,
struct fown_struct *fown, int signum)
{
struct file *file;
- u32 sid = current_sid();
+ u32 sid = task_sid(tsk);
u32 perm;
struct file_security_struct *fsec;
diff --git a/security/tomoyo/common.c b/security/tomoyo/common.c
index d4d41b3efc7..ddfb9cccf46 100644
--- a/security/tomoyo/common.c
+++ b/security/tomoyo/common.c
@@ -1720,14 +1720,14 @@ static bool tomoyo_policy_loader_exists(void)
* policies are not loaded yet.
* Thus, let do_execve() call this function everytime.
*/
- struct nameidata nd;
+ struct path path;
- if (path_lookup(tomoyo_loader, LOOKUP_FOLLOW, &nd)) {
+ if (kern_path(tomoyo_loader, LOOKUP_FOLLOW, &path)) {
printk(KERN_INFO "Not activating Mandatory Access Control now "
"since %s doesn't exist.\n", tomoyo_loader);
return false;
}
- path_put(&nd.path);
+ path_put(&path);
return true;
}
diff --git a/security/tomoyo/realpath.c b/security/tomoyo/realpath.c
index bf8e2b45168..40927a84cb6 100644
--- a/security/tomoyo/realpath.c
+++ b/security/tomoyo/realpath.c
@@ -165,11 +165,11 @@ char *tomoyo_realpath_from_path(struct path *path)
*/
char *tomoyo_realpath(const char *pathname)
{
- struct nameidata nd;
+ struct path path;
- if (pathname && path_lookup(pathname, LOOKUP_FOLLOW, &nd) == 0) {
- char *buf = tomoyo_realpath_from_path(&nd.path);
- path_put(&nd.path);
+ if (pathname && kern_path(pathname, LOOKUP_FOLLOW, &path) == 0) {
+ char *buf = tomoyo_realpath_from_path(&path);
+ path_put(&path);
return buf;
}
return NULL;
@@ -184,11 +184,11 @@ char *tomoyo_realpath(const char *pathname)
*/
char *tomoyo_realpath_nofollow(const char *pathname)
{
- struct nameidata nd;
+ struct path path;
- if (pathname && path_lookup(pathname, 0, &nd) == 0) {
- char *buf = tomoyo_realpath_from_path(&nd.path);
- path_put(&nd.path);
+ if (pathname && kern_path(pathname, 0, &path) == 0) {
+ char *buf = tomoyo_realpath_from_path(&path);
+ path_put(&path);
return buf;
}
return NULL;
diff --git a/sound/arm/aaci.c b/sound/arm/aaci.c
index 7fbd68fab94..5c48e36038f 100644
--- a/sound/arm/aaci.c
+++ b/sound/arm/aaci.c
@@ -1074,7 +1074,7 @@ static unsigned int __devinit aaci_size_fifo(struct aaci *aaci)
return i;
}
-static int __devinit aaci_probe(struct amba_device *dev, void *id)
+static int __devinit aaci_probe(struct amba_device *dev, struct amba_id *id)
{
struct aaci *aaci;
int ret, i;
diff --git a/sound/arm/pxa2xx-ac97-lib.c b/sound/arm/pxa2xx-ac97-lib.c
index a2c12d105c9..6fdca97186e 100644
--- a/sound/arm/pxa2xx-ac97-lib.c
+++ b/sound/arm/pxa2xx-ac97-lib.c
@@ -65,7 +65,7 @@ static void set_resetgpio_mode(int resetgpio_action)
switch (resetgpio_action) {
case RESETGPIO_NORMAL_ALTFUNC:
if (reset_gpio == 113)
- mode = 113 | GPIO_OUT | GPIO_DFLT_LOW;
+ mode = 113 | GPIO_ALT_FN_2_OUT;
if (reset_gpio == 95)
mode = 95 | GPIO_ALT_FN_1_OUT;
break;
diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c
index 63d088f2265..d659995ac3a 100644
--- a/sound/core/pcm_lib.c
+++ b/sound/core/pcm_lib.c
@@ -249,6 +249,17 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
new_hw_ptr = hw_base + pos;
}
}
+
+ /* Do jiffies check only in xrun_debug mode */
+ if (!xrun_debug(substream))
+ goto no_jiffies_check;
+
+ /* Skip the jiffies check for hardwares with BATCH flag.
+ * Such hardware usually just increases the position at each IRQ,
+ * thus it can't give any strange position.
+ */
+ if (runtime->hw.info & SNDRV_PCM_INFO_BATCH)
+ goto no_jiffies_check;
hdelta = new_hw_ptr - old_hw_ptr;
jdelta = jiffies - runtime->hw_ptr_jiffies;
if (((hdelta * HZ) / runtime->rate) > jdelta + HZ/100) {
@@ -272,6 +283,7 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream)
hw_base -= hw_base % runtime->buffer_size;
delta = 0;
}
+ no_jiffies_check:
if (delta > runtime->period_size + runtime->period_size / 2) {
hw_ptr_error(substream,
"Lost interrupts? "
@@ -329,7 +341,9 @@ int snd_pcm_update_hw_ptr(struct snd_pcm_substream *substream)
hw_base = 0;
new_hw_ptr = hw_base + pos;
}
- if (((delta * HZ) / runtime->rate) > jdelta + HZ/100) {
+ /* Do jiffies check only in xrun_debug mode */
+ if (xrun_debug(substream) &&
+ ((delta * HZ) / runtime->rate) > jdelta + HZ/100) {
hw_ptr_error(substream,
"hw_ptr skipping! "
"(pos=%ld, delta=%ld, period=%ld, jdelta=%lu/%lu)\n",
@@ -1471,7 +1485,6 @@ static int snd_pcm_lib_ioctl_reset(struct snd_pcm_substream *substream,
runtime->status->hw_ptr %= runtime->buffer_size;
else
runtime->status->hw_ptr = 0;
- runtime->hw_ptr_jiffies = jiffies;
snd_pcm_stream_unlock_irqrestore(substream, flags);
return 0;
}
diff --git a/sound/core/pcm_native.c b/sound/core/pcm_native.c
index cb769d415db..45dc53fcfa2 100644
--- a/sound/core/pcm_native.c
+++ b/sound/core/pcm_native.c
@@ -849,6 +849,7 @@ static void snd_pcm_post_start(struct snd_pcm_substream *substream, int state)
{
struct snd_pcm_runtime *runtime = substream->runtime;
snd_pcm_trigger_tstamp(substream);
+ runtime->hw_ptr_jiffies = jiffies;
runtime->status->state = state;
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK &&
runtime->silence_size > 0)
@@ -962,6 +963,11 @@ static int snd_pcm_do_pause(struct snd_pcm_substream *substream, int push)
{
if (substream->runtime->trigger_master != substream)
return 0;
+ /* The jiffies check in snd_pcm_update_hw_ptr*() is done by
+ * a delta betwen the current jiffies, this gives a large enough
+ * delta, effectively to skip the check once.
+ */
+ substream->runtime->hw_ptr_jiffies = jiffies - HZ * 1000;
return substream->ops->trigger(substream,
push ? SNDRV_PCM_TRIGGER_PAUSE_PUSH :
SNDRV_PCM_TRIGGER_PAUSE_RELEASE);
diff --git a/sound/drivers/pcsp/pcsp_mixer.c b/sound/drivers/pcsp/pcsp_mixer.c
index caeb0f57fcc..199b0337714 100644
--- a/sound/drivers/pcsp/pcsp_mixer.c
+++ b/sound/drivers/pcsp/pcsp_mixer.c
@@ -50,8 +50,8 @@ static int pcsp_treble_info(struct snd_kcontrol *kcontrol,
uinfo->value.enumerated.items = chip->max_treble + 1;
if (uinfo->value.enumerated.item > chip->max_treble)
uinfo->value.enumerated.item = chip->max_treble;
- sprintf(uinfo->value.enumerated.name, "%d",
- PCSP_CALC_RATE(uinfo->value.enumerated.item));
+ sprintf(uinfo->value.enumerated.name, "%lu",
+ (unsigned long)PCSP_CALC_RATE(uinfo->value.enumerated.item));
return 0;
}
diff --git a/sound/drivers/serial-u16550.c b/sound/drivers/serial-u16550.c
index b2b6d50c942..a25fb7b1f44 100644
--- a/sound/drivers/serial-u16550.c
+++ b/sound/drivers/serial-u16550.c
@@ -963,16 +963,11 @@ static int __devinit snd_serial_probe(struct platform_device *devptr)
if (err < 0)
goto _err;
- sprintf(card->longname, "%s at 0x%lx, irq %d speed %d div %d outs %d ins %d adaptor %s droponfull %d",
+ sprintf(card->longname, "%s [%s] at %#lx, irq %d",
card->shortname,
- uart->base,
- uart->irq,
- uart->speed,
- (int)uart->divisor,
- outs[dev],
- ins[dev],
adaptor_names[uart->adaptor],
- uart->drop_on_full);
+ uart->base,
+ uart->irq);
snd_card_set_dev(card, &devptr->dev);
diff --git a/sound/isa/msnd/msnd.c b/sound/isa/msnd/msnd.c
index 906454413ed..3a1526ae172 100644
--- a/sound/isa/msnd/msnd.c
+++ b/sound/isa/msnd/msnd.c
@@ -438,7 +438,8 @@ static void snd_msnd_capture_reset_queue(struct snd_msnd *chip,
static struct snd_pcm_hardware snd_msnd_playback = {
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE,
.rates = SNDRV_PCM_RATE_8000_48000,
.rate_min = 8000,
@@ -456,7 +457,8 @@ static struct snd_pcm_hardware snd_msnd_playback = {
static struct snd_pcm_hardware snd_msnd_capture = {
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE,
.rates = SNDRV_PCM_RATE_8000_48000,
.rate_min = 8000,
diff --git a/sound/pci/ac97/ac97_patch.c b/sound/pci/ac97/ac97_patch.c
index 81bc93e5f1e..7337abdbe4e 100644
--- a/sound/pci/ac97/ac97_patch.c
+++ b/sound/pci/ac97/ac97_patch.c
@@ -958,10 +958,13 @@ static int patch_sigmatel_stac9708_3d(struct snd_ac97 * ac97)
}
static const struct snd_kcontrol_new snd_ac97_sigmatel_4speaker =
-AC97_SINGLE("Sigmatel 4-Speaker Stereo Playback Switch", AC97_SIGMATEL_DAC2INVERT, 2, 1, 0);
+AC97_SINGLE("Sigmatel 4-Speaker Stereo Playback Switch",
+ AC97_SIGMATEL_DAC2INVERT, 2, 1, 0);
+/* "Sigmatel " removed due to excessive name length: */
static const struct snd_kcontrol_new snd_ac97_sigmatel_phaseinvert =
-AC97_SINGLE("Sigmatel Surround Phase Inversion Playback Switch", AC97_SIGMATEL_DAC2INVERT, 3, 1, 0);
+AC97_SINGLE("Surround Phase Inversion Playback Switch",
+ AC97_SIGMATEL_DAC2INVERT, 3, 1, 0);
static const struct snd_kcontrol_new snd_ac97_sigmatel_controls[] = {
AC97_SINGLE("Sigmatel DAC 6dB Attenuate", AC97_SIGMATEL_ANALOG, 1, 1, 0),
diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c
index a299340519d..ce3f2e90f4d 100644
--- a/sound/pci/bt87x.c
+++ b/sound/pci/bt87x.c
@@ -349,7 +349,8 @@ static struct snd_pcm_hardware snd_bt87x_digital_hw = {
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_S16_LE,
.rates = 0, /* set at runtime */
.channels_min = 2,
@@ -365,7 +366,8 @@ static struct snd_pcm_hardware snd_bt87x_analog_hw = {
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8,
.rates = SNDRV_PCM_RATE_KNOT,
.rate_min = ANALOG_CLOCK / CLOCK_DIV_MAX,
diff --git a/sound/pci/ca0106/ca0106_mixer.c b/sound/pci/ca0106/ca0106_mixer.c
index ad2888705d2..c111efe61c3 100644
--- a/sound/pci/ca0106/ca0106_mixer.c
+++ b/sound/pci/ca0106/ca0106_mixer.c
@@ -800,7 +800,7 @@ int __devinit snd_ca0106_mixer(struct snd_ca0106 *emu)
"Capture Volume",
"External Amplifier",
"Sigmatel 4-Speaker Stereo Playback Switch",
- "Sigmatel Surround Phase Inversion Playback ",
+ "Surround Phase Inversion Playback Switch",
NULL
};
static char *ca0106_rename_ctls[] = {
diff --git a/sound/pci/echoaudio/indigodjx.c b/sound/pci/echoaudio/indigodjx.c
index 3482ef69f49..2e44316530a 100644
--- a/sound/pci/echoaudio/indigodjx.c
+++ b/sound/pci/echoaudio/indigodjx.c
@@ -88,6 +88,7 @@ static struct snd_pcm_hardware pcm_hardware_skel = {
.rates = SNDRV_PCM_RATE_32000 |
SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_64000 |
SNDRV_PCM_RATE_88200 |
SNDRV_PCM_RATE_96000,
.rate_min = 32000,
diff --git a/sound/pci/echoaudio/indigoiox.c b/sound/pci/echoaudio/indigoiox.c
index aebee27a40f..eb3819f9654 100644
--- a/sound/pci/echoaudio/indigoiox.c
+++ b/sound/pci/echoaudio/indigoiox.c
@@ -89,6 +89,7 @@ static struct snd_pcm_hardware pcm_hardware_skel = {
.rates = SNDRV_PCM_RATE_32000 |
SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000 |
+ SNDRV_PCM_RATE_64000 |
SNDRV_PCM_RATE_88200 |
SNDRV_PCM_RATE_96000,
.rate_min = 32000,
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index b8a0d3e7927..bcbb736f94f 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -12058,6 +12058,7 @@ static struct snd_pci_quirk alc268_cfg_tbl[] = {
SND_PCI_QUIRK(0x1028, 0x0253, "Dell OEM", ALC268_DELL),
SND_PCI_QUIRK(0x1028, 0x02b0, "Dell Inspiron Mini9", ALC268_DELL),
SND_PCI_QUIRK(0x103c, 0x30cc, "TOSHIBA", ALC268_TOSHIBA),
+ SND_PCI_QUIRK(0x103c, 0x30f1, "HP TX25xx series", ALC268_TOSHIBA),
SND_PCI_QUIRK(0x1043, 0x1205, "ASUS W7J", ALC268_3ST),
SND_PCI_QUIRK(0x1179, 0xff10, "TOSHIBA A205", ALC268_TOSHIBA),
SND_PCI_QUIRK(0x1179, 0xff50, "TOSHIBA A305", ALC268_TOSHIBA),
diff --git a/sound/pci/hda/patch_sigmatel.c b/sound/pci/hda/patch_sigmatel.c
index 917bc5d3ac2..03b3646018a 100644
--- a/sound/pci/hda/patch_sigmatel.c
+++ b/sound/pci/hda/patch_sigmatel.c
@@ -4079,7 +4079,12 @@ static int stac92xx_init(struct hda_codec *codec)
pinctl = snd_hda_codec_read(codec, nid, 0,
AC_VERB_GET_PIN_WIDGET_CONTROL, 0);
/* if PINCTL already set then skip */
- if (!(pinctl & AC_PINCTL_IN_EN)) {
+ /* Also, if both INPUT and OUTPUT are set,
+ * it must be a BIOS bug; need to override, too
+ */
+ if (!(pinctl & AC_PINCTL_IN_EN) ||
+ (pinctl & AC_PINCTL_OUT_EN)) {
+ pinctl &= ~AC_PINCTL_OUT_EN;
pinctl |= AC_PINCTL_IN_EN;
stac92xx_auto_set_pinctl(codec, nid,
pinctl);
diff --git a/sound/pci/korg1212/korg1212.c b/sound/pci/korg1212/korg1212.c
index 8b79969034b..7cc38a11e99 100644
--- a/sound/pci/korg1212/korg1212.c
+++ b/sound/pci/korg1212/korg1212.c
@@ -1238,7 +1238,8 @@ static struct snd_pcm_hardware snd_korg1212_playback_info =
{
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED),
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BATCH),
.formats = SNDRV_PCM_FMTBIT_S16_LE,
.rates = (SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000),
@@ -1258,7 +1259,8 @@ static struct snd_pcm_hardware snd_korg1212_capture_info =
{
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED),
+ SNDRV_PCM_INFO_INTERLEAVED |
+ SNDRV_PCM_INFO_BATCH),
.formats = SNDRV_PCM_FMTBIT_S16_LE,
.rates = (SNDRV_PCM_RATE_44100 |
SNDRV_PCM_RATE_48000),
diff --git a/sound/pci/riptide/riptide.c b/sound/pci/riptide/riptide.c
index 6f1034417a0..e51a5ef1954 100644
--- a/sound/pci/riptide/riptide.c
+++ b/sound/pci/riptide/riptide.c
@@ -889,7 +889,7 @@ static int sendcmd(struct cmdif *cif, u32 flags, u32 cmd, u32 parm,
spin_lock_irqsave(&cif->lock, irqflags);
while (i++ < CMDIF_TIMEOUT && !IS_READY(cif->hwport))
udelay(10);
- if (i >= CMDIF_TIMEOUT) {
+ if (i > CMDIF_TIMEOUT) {
err = -EBUSY;
goto errout;
}
@@ -907,8 +907,10 @@ static int sendcmd(struct cmdif *cif, u32 flags, u32 cmd, u32 parm,
WRITE_PORT_ULONG(cmdport->data1, cmd); /* write cmd */
if ((flags & RESP) && ret) {
while (!IS_DATF(cmdport) &&
- time++ < CMDIF_TIMEOUT)
+ time < CMDIF_TIMEOUT) {
udelay(10);
+ time++;
+ }
if (time < CMDIF_TIMEOUT) { /* read response */
ret->retlongs[0] =
READ_PORT_ULONG(cmdport->data1);
@@ -1454,7 +1456,7 @@ static int snd_riptide_trigger(struct snd_pcm_substream *substream, int cmd)
SEND_GPOS(cif, 0, data->id, &rptr);
udelay(1);
} while (i != rptr.retlongs[1] && j++ < MAX_WRITE_RETRY);
- if (j >= MAX_WRITE_RETRY)
+ if (j > MAX_WRITE_RETRY)
snd_printk(KERN_ERR "Riptide: Could not stop stream!");
break;
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
@@ -1783,7 +1785,7 @@ snd_riptide_codec_write(struct snd_ac97 *ac97, unsigned short reg,
SEND_SACR(cif, val, reg);
SEND_RACR(cif, reg, &rptr);
} while (rptr.retwords[1] != val && i++ < MAX_WRITE_RETRY);
- if (i == MAX_WRITE_RETRY)
+ if (i > MAX_WRITE_RETRY)
snd_printdd("Write AC97 reg failed\n");
}
diff --git a/sound/pci/via82xx.c b/sound/pci/via82xx.c
index 809b233dd4a..1ef58c51c21 100644
--- a/sound/pci/via82xx.c
+++ b/sound/pci/via82xx.c
@@ -1687,7 +1687,7 @@ static int snd_via8233_pcmdxs_volume_put(struct snd_kcontrol *kcontrol,
return change;
}
-static const DECLARE_TLV_DB_SCALE(db_scale_dxs, -9450, 150, 1);
+static const DECLARE_TLV_DB_SCALE(db_scale_dxs, -4650, 150, 1);
static struct snd_kcontrol_new snd_via8233_pcmdxs_volume_control __devinitdata = {
.name = "PCM Playback Volume",
diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c b/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c
index 01066c95580..d057e648964 100644
--- a/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c
+++ b/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c
@@ -240,7 +240,8 @@ static int pdacf_pcm_prepare(struct snd_pcm_substream *subs)
static struct snd_pcm_hardware pdacf_pcm_capture_hw = {
.info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME |
- SNDRV_PCM_INFO_MMAP_VALID),
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH),
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE |
SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE |
SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE,
diff --git a/sound/soc/au1x/dbdma2.c b/sound/soc/au1x/dbdma2.c
index 30490a25914..594c6c5b783 100644
--- a/sound/soc/au1x/dbdma2.c
+++ b/sound/soc/au1x/dbdma2.c
@@ -82,7 +82,7 @@ static struct au1xpsc_audio_dmadata *au1xpsc_audio_pcmdma[2];
/* PCM hardware DMA capabilities - platform specific */
static const struct snd_pcm_hardware au1xpsc_pcm_hardware = {
.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED,
+ SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BATCH,
.formats = AU1XPSC_PCM_FMTS,
.period_bytes_min = AU1XPSC_PERIOD_MIN_BYTES,
.period_bytes_max = 4096 * 1024 - 1,
diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c
index 921b205de28..df7c8c281d2 100644
--- a/sound/soc/codecs/twl4030.c
+++ b/sound/soc/codecs/twl4030.c
@@ -836,6 +836,12 @@ static DECLARE_TLV_DB_SCALE(analog_tlv, -2400, 200, 0);
static DECLARE_TLV_DB_SCALE(output_tvl, -1200, 600, 1);
/*
+ * Gain control for earpiece amplifier
+ * 0 dB to 12 dB in 6 dB steps (mute instead of -6)
+ */
+static DECLARE_TLV_DB_SCALE(output_ear_tvl, -600, 600, 1);
+
+/*
* Capture gain after the ADCs
* from 0 dB to 31 dB in 1 dB steps
*/
@@ -900,7 +906,7 @@ static const struct snd_kcontrol_new twl4030_snd_controls[] = {
4, 3, 0, output_tvl),
SOC_SINGLE_TLV_TWL4030("Earpiece Playback Volume",
- TWL4030_REG_EAR_CTL, 4, 3, 0, output_tvl),
+ TWL4030_REG_EAR_CTL, 4, 3, 0, output_ear_tvl),
/* Common capture gain controls */
SOC_DOUBLE_R_TLV("TX1 Digital Capture Volume",
diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c
index 3b1d0993bed..0275321ff8a 100644
--- a/sound/soc/codecs/wm8350.c
+++ b/sound/soc/codecs/wm8350.c
@@ -968,7 +968,7 @@ static int wm8350_pcm_trigger(struct snd_pcm_substream *substream,
* required for LRC in master mode. The DACs or ADCs need a
* valid audio path i.e. pin -> ADC or DAC -> pin before
* the LRC will be enabled in master mode. */
- if (!master && cmd != SNDRV_PCM_TRIGGER_START)
+ if (!master || cmd != SNDRV_PCM_TRIGGER_START)
return 0;
if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) {
diff --git a/sound/soc/codecs/wm8990.c b/sound/soc/codecs/wm8990.c
index c518c3e5aa3..40cd274eb1e 100644
--- a/sound/soc/codecs/wm8990.c
+++ b/sound/soc/codecs/wm8990.c
@@ -729,7 +729,7 @@ SND_SOC_DAPM_MIXER_E("INMIXL", WM8990_INTDRIVBITS, WM8990_INMIXL_PWR_BIT, 0,
inmixer_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
/* AINLMUX */
-SND_SOC_DAPM_MUX_E("AILNMUX", WM8990_INTDRIVBITS, WM8990_AINLMUX_PWR_BIT, 0,
+SND_SOC_DAPM_MUX_E("AINLMUX", WM8990_INTDRIVBITS, WM8990_AINLMUX_PWR_BIT, 0,
&wm8990_dapm_ainlmux_controls, inmixer_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
@@ -740,7 +740,7 @@ SND_SOC_DAPM_MIXER_E("INMIXR", WM8990_INTDRIVBITS, WM8990_INMIXR_PWR_BIT, 0,
inmixer_event, SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
/* AINRMUX */
-SND_SOC_DAPM_MUX_E("AIRNMUX", WM8990_INTDRIVBITS, WM8990_AINRMUX_PWR_BIT, 0,
+SND_SOC_DAPM_MUX_E("AINRMUX", WM8990_INTDRIVBITS, WM8990_AINRMUX_PWR_BIT, 0,
&wm8990_dapm_ainrmux_controls, inmixer_event,
SND_SOC_DAPM_POST_PMU | SND_SOC_DAPM_POST_PMD),
@@ -848,40 +848,40 @@ static const struct snd_soc_dapm_route audio_map[] = {
{"LIN12 PGA", "LIN2 Switch", "LIN2"},
/* LIN34 PGA */
{"LIN34 PGA", "LIN3 Switch", "LIN3"},
- {"LIN34 PGA", "LIN4 Switch", "LIN4"},
+ {"LIN34 PGA", "LIN4 Switch", "LIN4/RXN"},
/* INMIXL */
{"INMIXL", "Record Left Volume", "LOMIX"},
{"INMIXL", "LIN2 Volume", "LIN2"},
{"INMIXL", "LINPGA12 Switch", "LIN12 PGA"},
{"INMIXL", "LINPGA34 Switch", "LIN34 PGA"},
- /* AILNMUX */
- {"AILNMUX", "INMIXL Mix", "INMIXL"},
- {"AILNMUX", "DIFFINL Mix", "LIN12PGA"},
- {"AILNMUX", "DIFFINL Mix", "LIN34PGA"},
- {"AILNMUX", "RXVOICE Mix", "LIN4/RXN"},
- {"AILNMUX", "RXVOICE Mix", "RIN4/RXP"},
+ /* AINLMUX */
+ {"AINLMUX", "INMIXL Mix", "INMIXL"},
+ {"AINLMUX", "DIFFINL Mix", "LIN12 PGA"},
+ {"AINLMUX", "DIFFINL Mix", "LIN34 PGA"},
+ {"AINLMUX", "RXVOICE Mix", "LIN4/RXN"},
+ {"AINLMUX", "RXVOICE Mix", "RIN4/RXP"},
/* ADC */
- {"Left ADC", NULL, "AILNMUX"},
+ {"Left ADC", NULL, "AINLMUX"},
/* RIN12 PGA */
{"RIN12 PGA", "RIN1 Switch", "RIN1"},
{"RIN12 PGA", "RIN2 Switch", "RIN2"},
/* RIN34 PGA */
{"RIN34 PGA", "RIN3 Switch", "RIN3"},
- {"RIN34 PGA", "RIN4 Switch", "RIN4"},
+ {"RIN34 PGA", "RIN4 Switch", "RIN4/RXP"},
/* INMIXL */
{"INMIXR", "Record Right Volume", "ROMIX"},
{"INMIXR", "RIN2 Volume", "RIN2"},
{"INMIXR", "RINPGA12 Switch", "RIN12 PGA"},
{"INMIXR", "RINPGA34 Switch", "RIN34 PGA"},
- /* AIRNMUX */
- {"AIRNMUX", "INMIXR Mix", "INMIXR"},
- {"AIRNMUX", "DIFFINR Mix", "RIN12PGA"},
- {"AIRNMUX", "DIFFINR Mix", "RIN34PGA"},
- {"AIRNMUX", "RXVOICE Mix", "RIN4/RXN"},
- {"AIRNMUX", "RXVOICE Mix", "RIN4/RXP"},
+ /* AINRMUX */
+ {"AINRMUX", "INMIXR Mix", "INMIXR"},
+ {"AINRMUX", "DIFFINR Mix", "RIN12 PGA"},
+ {"AINRMUX", "DIFFINR Mix", "RIN34 PGA"},
+ {"AINRMUX", "RXVOICE Mix", "LIN4/RXN"},
+ {"AINRMUX", "RXVOICE Mix", "RIN4/RXP"},
/* ADC */
- {"Right ADC", NULL, "AIRNMUX"},
+ {"Right ADC", NULL, "AINRMUX"},
/* LOMIX */
{"LOMIX", "LOMIX RIN3 Bypass Switch", "RIN3"},
@@ -922,7 +922,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
{"LOPMIX", "LOPMIX Left Mixer PGA Switch", "LOPGA"},
/* OUT3MIX */
- {"OUT3MIX", "OUT3MIX LIN4/RXP Bypass Switch", "LIN4/RXP"},
+ {"OUT3MIX", "OUT3MIX LIN4/RXP Bypass Switch", "LIN4/RXN"},
{"OUT3MIX", "OUT3MIX Left Out PGA Switch", "LOPGA"},
/* OUT4MIX */
@@ -949,7 +949,7 @@ static const struct snd_soc_dapm_route audio_map[] = {
/* Output Pins */
{"LON", NULL, "LONMIX"},
{"LOP", NULL, "LOPMIX"},
- {"OUT", NULL, "OUT3MIX"},
+ {"OUT3", NULL, "OUT3MIX"},
{"LOUT", NULL, "LOUT PGA"},
{"SPKN", NULL, "SPKMIX"},
{"ROUT", NULL, "ROUT PGA"},
diff --git a/sound/soc/davinci/Kconfig b/sound/soc/davinci/Kconfig
index bd7392c9657..411a710be66 100644
--- a/sound/soc/davinci/Kconfig
+++ b/sound/soc/davinci/Kconfig
@@ -10,13 +10,14 @@ config SND_DAVINCI_SOC_I2S
tristate
config SND_DAVINCI_SOC_EVM
- tristate "SoC Audio support for DaVinci EVM"
- depends on SND_DAVINCI_SOC && MACH_DAVINCI_EVM
+ tristate "SoC Audio support for DaVinci DM6446 or DM355 EVM"
+ depends on SND_DAVINCI_SOC
+ depends on MACH_DAVINCI_EVM || MACH_DAVINCI_DM355_EVM
select SND_DAVINCI_SOC_I2S
select SND_SOC_TLV320AIC3X
help
Say Y if you want to add support for SoC audio on TI
- DaVinci EVM platform.
+ DaVinci DM6446 or DM355 EVM platforms.
config SND_DAVINCI_SOC_SFFSDR
tristate "SoC Audio support for SFFSDR"
diff --git a/sound/soc/davinci/davinci-evm.c b/sound/soc/davinci/davinci-evm.c
index 9b90b347007..58fd1cbedd8 100644
--- a/sound/soc/davinci/davinci-evm.c
+++ b/sound/soc/davinci/davinci-evm.c
@@ -20,7 +20,11 @@
#include <sound/soc-dapm.h>
#include <asm/dma.h>
-#include <mach/hardware.h>
+#include <asm/mach-types.h>
+
+#include <mach/asp.h>
+#include <mach/edma.h>
+#include <mach/mux.h>
#include "../codecs/tlv320aic3x.h"
#include "davinci-pcm.h"
@@ -150,7 +154,7 @@ static struct snd_soc_card snd_soc_card_evm = {
/* evm audio private data */
static struct aic3x_setup_data evm_aic3x_setup = {
- .i2c_bus = 0,
+ .i2c_bus = 1,
.i2c_address = 0x1b,
};
@@ -161,36 +165,73 @@ static struct snd_soc_device evm_snd_devdata = {
.codec_data = &evm_aic3x_setup,
};
+/* DM6446 EVM uses ASP0; line-out is a pair of RCA jacks */
static struct resource evm_snd_resources[] = {
{
- .start = DAVINCI_MCBSP_BASE,
- .end = DAVINCI_MCBSP_BASE + SZ_8K - 1,
+ .start = DAVINCI_ASP0_BASE,
+ .end = DAVINCI_ASP0_BASE + SZ_8K - 1,
.flags = IORESOURCE_MEM,
},
};
static struct evm_snd_platform_data evm_snd_data = {
- .tx_dma_ch = DM644X_DMACH_MCBSP_TX,
- .rx_dma_ch = DM644X_DMACH_MCBSP_RX,
+ .tx_dma_ch = DAVINCI_DMA_ASP0_TX,
+ .rx_dma_ch = DAVINCI_DMA_ASP0_RX,
+};
+
+/* DM335 EVM uses ASP1; line-out is a stereo mini-jack */
+static struct resource dm335evm_snd_resources[] = {
+ {
+ .start = DAVINCI_ASP1_BASE,
+ .end = DAVINCI_ASP1_BASE + SZ_8K - 1,
+ .flags = IORESOURCE_MEM,
+ },
+};
+
+static struct evm_snd_platform_data dm335evm_snd_data = {
+ .tx_dma_ch = DAVINCI_DMA_ASP1_TX,
+ .rx_dma_ch = DAVINCI_DMA_ASP1_RX,
};
static struct platform_device *evm_snd_device;
static int __init evm_init(void)
{
+ struct resource *resources;
+ unsigned num_resources;
+ struct evm_snd_platform_data *data;
+ int index;
int ret;
- evm_snd_device = platform_device_alloc("soc-audio", 0);
+ if (machine_is_davinci_evm()) {
+ davinci_cfg_reg(DM644X_MCBSP);
+
+ resources = evm_snd_resources;
+ num_resources = ARRAY_SIZE(evm_snd_resources);
+ data = &evm_snd_data;
+ index = 0;
+ } else if (machine_is_davinci_dm355_evm()) {
+ /* we don't use ASP1 IRQs, or we'd need to mux them ... */
+ davinci_cfg_reg(DM355_EVT8_ASP1_TX);
+ davinci_cfg_reg(DM355_EVT9_ASP1_RX);
+
+ resources = dm335evm_snd_resources;
+ num_resources = ARRAY_SIZE(dm335evm_snd_resources);
+ data = &dm335evm_snd_data;
+ index = 1;
+ } else
+ return -EINVAL;
+
+ evm_snd_device = platform_device_alloc("soc-audio", index);
if (!evm_snd_device)
return -ENOMEM;
platform_set_drvdata(evm_snd_device, &evm_snd_devdata);
evm_snd_devdata.dev = &evm_snd_device->dev;
- platform_device_add_data(evm_snd_device, &evm_snd_data,
- sizeof(evm_snd_data));
+ platform_device_add_data(evm_snd_device, data, sizeof(*data));
- ret = platform_device_add_resources(evm_snd_device, evm_snd_resources,
- ARRAY_SIZE(evm_snd_resources));
+ ret = platform_device_add_resources(evm_snd_device, resources,
+ num_resources);
if (ret) {
platform_device_put(evm_snd_device);
return ret;
diff --git a/sound/soc/davinci/davinci-i2s.c b/sound/soc/davinci/davinci-i2s.c
index ffdb9439d3d..b1ea52fc83c 100644
--- a/sound/soc/davinci/davinci-i2s.c
+++ b/sound/soc/davinci/davinci-i2s.c
@@ -24,6 +24,26 @@
#include "davinci-pcm.h"
+
+/*
+ * NOTE: terminology here is confusing.
+ *
+ * - This driver supports the "Audio Serial Port" (ASP),
+ * found on dm6446, dm355, and other DaVinci chips.
+ *
+ * - But it labels it a "Multi-channel Buffered Serial Port"
+ * (McBSP) as on older chips like the dm642 ... which was
+ * backward-compatible, possibly explaining that confusion.
+ *
+ * - OMAP chips have a controller called McBSP, which is
+ * incompatible with the DaVinci flavor of McBSP.
+ *
+ * - Newer DaVinci chips have a controller called McASP,
+ * incompatible with ASP and with either McBSP.
+ *
+ * In short: this uses ASP to implement I2S, not McBSP.
+ * And it won't be the only DaVinci implemention of I2S.
+ */
#define DAVINCI_MCBSP_DRR_REG 0x00
#define DAVINCI_MCBSP_DXR_REG 0x04
#define DAVINCI_MCBSP_SPCR_REG 0x08
@@ -421,7 +441,7 @@ static int davinci_i2s_probe(struct platform_device *pdev,
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_card *card = socdev->card;
- struct snd_soc_dai *cpu_dai = card->dai_link[pdev->id].cpu_dai;
+ struct snd_soc_dai *cpu_dai = card->dai_link->cpu_dai;
struct davinci_mcbsp_dev *dev;
struct resource *mem, *ioarea;
struct evm_snd_platform_data *pdata;
@@ -448,7 +468,7 @@ static int davinci_i2s_probe(struct platform_device *pdev,
cpu_dai->private_data = dev;
- dev->clk = clk_get(&pdev->dev, "McBSPCLK");
+ dev->clk = clk_get(&pdev->dev, NULL);
if (IS_ERR(dev->clk)) {
ret = -ENODEV;
goto err_free_mem;
@@ -483,7 +503,7 @@ static void davinci_i2s_remove(struct platform_device *pdev,
{
struct snd_soc_device *socdev = platform_get_drvdata(pdev);
struct snd_soc_card *card = socdev->card;
- struct snd_soc_dai *cpu_dai = card->dai_link[pdev->id].cpu_dai;
+ struct snd_soc_dai *cpu_dai = card->dai_link->cpu_dai;
struct davinci_mcbsp_dev *dev = cpu_dai->private_data;
struct resource *mem;
diff --git a/sound/soc/davinci/davinci-pcm.c b/sound/soc/davinci/davinci-pcm.c
index 7af3b5b3a53..a0599658848 100644
--- a/sound/soc/davinci/davinci-pcm.c
+++ b/sound/soc/davinci/davinci-pcm.c
@@ -22,6 +22,7 @@
#include <sound/soc.h>
#include <asm/dma.h>
+#include <mach/edma.h>
#include "davinci-pcm.h"
@@ -51,7 +52,7 @@ struct davinci_runtime_data {
spinlock_t lock;
int period; /* current DMA period */
int master_lch; /* Master DMA channel */
- int slave_lch; /* Slave DMA channel */
+ int slave_lch; /* linked parameter RAM reload slot */
struct davinci_pcm_dma_params *params; /* DMA params */
};
@@ -90,18 +91,18 @@ static void davinci_pcm_enqueue_dma(struct snd_pcm_substream *substream)
dst_bidx = data_type;
}
- davinci_set_dma_src_params(lch, src, INCR, W8BIT);
- davinci_set_dma_dest_params(lch, dst, INCR, W8BIT);
- davinci_set_dma_src_index(lch, src_bidx, 0);
- davinci_set_dma_dest_index(lch, dst_bidx, 0);
- davinci_set_dma_transfer_params(lch, data_type, count, 1, 0, ASYNC);
+ edma_set_src(lch, src, INCR, W8BIT);
+ edma_set_dest(lch, dst, INCR, W8BIT);
+ edma_set_src_index(lch, src_bidx, 0);
+ edma_set_dest_index(lch, dst_bidx, 0);
+ edma_set_transfer_params(lch, data_type, count, 1, 0, ASYNC);
prtd->period++;
if (unlikely(prtd->period >= runtime->periods))
prtd->period = 0;
}
-static void davinci_pcm_dma_irq(int lch, u16 ch_status, void *data)
+static void davinci_pcm_dma_irq(unsigned lch, u16 ch_status, void *data)
{
struct snd_pcm_substream *substream = data;
struct davinci_runtime_data *prtd = substream->runtime->private_data;
@@ -125,7 +126,7 @@ static int davinci_pcm_dma_request(struct snd_pcm_substream *substream)
struct davinci_runtime_data *prtd = substream->runtime->private_data;
struct snd_soc_pcm_runtime *rtd = substream->private_data;
struct davinci_pcm_dma_params *dma_data = rtd->dai->cpu_dai->dma_data;
- int tcc = TCC_ANY;
+ struct edmacc_param p_ram;
int ret;
if (!dma_data)
@@ -134,22 +135,34 @@ static int davinci_pcm_dma_request(struct snd_pcm_substream *substream)
prtd->params = dma_data;
/* Request master DMA channel */
- ret = davinci_request_dma(prtd->params->channel, prtd->params->name,
+ ret = edma_alloc_channel(prtd->params->channel,
davinci_pcm_dma_irq, substream,
- &prtd->master_lch, &tcc, EVENTQ_0);
- if (ret)
+ EVENTQ_0);
+ if (ret < 0)
return ret;
+ prtd->master_lch = ret;
- /* Request slave DMA channel */
- ret = davinci_request_dma(PARAM_ANY, "Link",
- NULL, NULL, &prtd->slave_lch, &tcc, EVENTQ_0);
- if (ret) {
- davinci_free_dma(prtd->master_lch);
+ /* Request parameter RAM reload slot */
+ ret = edma_alloc_slot(EDMA_SLOT_ANY);
+ if (ret < 0) {
+ edma_free_channel(prtd->master_lch);
return ret;
}
-
- /* Link slave DMA channel in loopback */
- davinci_dma_link_lch(prtd->slave_lch, prtd->slave_lch);
+ prtd->slave_lch = ret;
+
+ /* Issue transfer completion IRQ when the channel completes a
+ * transfer, then always reload from the same slot (by a kind
+ * of loopback link). The completion IRQ handler will update
+ * the reload slot with a new buffer.
+ *
+ * REVISIT save p_ram here after setting up everything except
+ * the buffer and its length (ccnt) ... use it as a template
+ * so davinci_pcm_enqueue_dma() takes less time in IRQ.
+ */
+ edma_read_slot(prtd->slave_lch, &p_ram);
+ p_ram.opt |= TCINTEN | EDMA_TCC(prtd->master_lch);
+ p_ram.link_bcntrld = prtd->slave_lch << 5;
+ edma_write_slot(prtd->slave_lch, &p_ram);
return 0;
}
@@ -165,12 +178,12 @@ static int davinci_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
case SNDRV_PCM_TRIGGER_START:
case SNDRV_PCM_TRIGGER_RESUME:
case SNDRV_PCM_TRIGGER_PAUSE_RELEASE:
- davinci_start_dma(prtd->master_lch);
+ edma_start(prtd->master_lch);
break;
case SNDRV_PCM_TRIGGER_STOP:
case SNDRV_PCM_TRIGGER_SUSPEND:
case SNDRV_PCM_TRIGGER_PAUSE_PUSH:
- davinci_stop_dma(prtd->master_lch);
+ edma_stop(prtd->master_lch);
break;
default:
ret = -EINVAL;
@@ -185,14 +198,14 @@ static int davinci_pcm_trigger(struct snd_pcm_substream *substream, int cmd)
static int davinci_pcm_prepare(struct snd_pcm_substream *substream)
{
struct davinci_runtime_data *prtd = substream->runtime->private_data;
- struct paramentry_descriptor temp;
+ struct edmacc_param temp;
prtd->period = 0;
davinci_pcm_enqueue_dma(substream);
- /* Get slave channel dma params for master channel startup */
- davinci_get_dma_params(prtd->slave_lch, &temp);
- davinci_set_dma_params(prtd->master_lch, &temp);
+ /* Copy self-linked parameter RAM entry into master channel */
+ edma_read_slot(prtd->slave_lch, &temp);
+ edma_write_slot(prtd->master_lch, &temp);
return 0;
}
@@ -208,7 +221,7 @@ davinci_pcm_pointer(struct snd_pcm_substream *substream)
spin_lock(&prtd->lock);
- davinci_dma_getposition(prtd->master_lch, &src, &dst);
+ edma_get_position(prtd->master_lch, &src, &dst);
if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK)
count = src - runtime->dma_addr;
else
@@ -253,10 +266,10 @@ static int davinci_pcm_close(struct snd_pcm_substream *substream)
struct snd_pcm_runtime *runtime = substream->runtime;
struct davinci_runtime_data *prtd = runtime->private_data;
- davinci_dma_unlink_lch(prtd->slave_lch, prtd->slave_lch);
+ edma_unlink(prtd->slave_lch);
- davinci_free_dma(prtd->slave_lch);
- davinci_free_dma(prtd->master_lch);
+ edma_free_slot(prtd->slave_lch);
+ edma_free_channel(prtd->master_lch);
kfree(prtd);
diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c
index 3aa729df27b..1111c710118 100644
--- a/sound/soc/fsl/mpc5200_psc_i2s.c
+++ b/sound/soc/fsl/mpc5200_psc_i2s.c
@@ -504,7 +504,8 @@ static struct snd_soc_dai psc_i2s_dai_template = {
static const struct snd_pcm_hardware psc_i2s_pcm_hardware = {
.info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID |
- SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER,
+ SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE |
SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE,
.rate_min = 8000,
diff --git a/sound/soc/sh/dma-sh7760.c b/sound/soc/sh/dma-sh7760.c
index 0dad3a0bb92..baddb1242c7 100644
--- a/sound/soc/sh/dma-sh7760.c
+++ b/sound/soc/sh/dma-sh7760.c
@@ -103,7 +103,8 @@ static struct snd_pcm_hardware camelot_pcm_hardware = {
.info = (SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID),
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH),
.formats = DMABRG_FMTS,
.rates = DMABRG_RATES,
.rate_min = 8000,
diff --git a/sound/soc/soc-core.c b/sound/soc/soc-core.c
index 99712f652d0..1cd149b9ce6 100644
--- a/sound/soc/soc-core.c
+++ b/sound/soc/soc-core.c
@@ -954,6 +954,9 @@ static int soc_remove(struct platform_device *pdev)
struct snd_soc_platform *platform = card->platform;
struct snd_soc_codec_device *codec_dev = socdev->codec_dev;
+ if (!card->instantiated)
+ return 0;
+
run_delayed_work(&card->delayed_work);
if (platform->remove)
diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c
index af95ff1e126..1d2e51b3f91 100644
--- a/sound/sparc/dbri.c
+++ b/sound/sparc/dbri.c
@@ -1975,7 +1975,8 @@ static struct snd_pcm_hardware snd_dbri_pcm_hw = {
.info = SNDRV_PCM_INFO_MMAP |
SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID,
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH,
.formats = SNDRV_PCM_FMTBIT_MU_LAW |
SNDRV_PCM_FMTBIT_A_LAW |
SNDRV_PCM_FMTBIT_U8 |
diff --git a/sound/usb/usx2y/usbusx2yaudio.c b/sound/usb/usx2y/usbusx2yaudio.c
index 9a608fa8515..dd1ab617784 100644
--- a/sound/usb/usx2y/usbusx2yaudio.c
+++ b/sound/usb/usx2y/usbusx2yaudio.c
@@ -870,7 +870,8 @@ static struct snd_pcm_hardware snd_usX2Y_2c =
{
.info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED |
SNDRV_PCM_INFO_BLOCK_TRANSFER |
- SNDRV_PCM_INFO_MMAP_VALID),
+ SNDRV_PCM_INFO_MMAP_VALID |
+ SNDRV_PCM_INFO_BATCH),
.formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_3LE,
.rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000,
.rate_min = 44100,