diff options
| -rw-r--r-- | arch/arm/boot/compressed/head-sharpsl.S | 111 |
1 files changed, 85 insertions, 26 deletions
diff --git a/arch/arm/boot/compressed/head-sharpsl.S b/arch/arm/boot/compressed/head-sharpsl.S index d6bf8a2b090..59ad69640d6 100644 --- a/arch/arm/boot/compressed/head-sharpsl.S +++ b/arch/arm/boot/compressed/head-sharpsl.S @@ -7,7 +7,8 @@ * so we have to figure out the machine for ourselves... * * Support for Poodle, Corgi (SL-C700), Shepherd (SL-C750) - * and Husky (SL-C760). + * Husky (SL-C760), Tosa (SL-C6000), Spitz (SL-C3000), + * Akita (SL-C1000) and Borzoi (SL-C3100). * */ @@ -23,6 +24,22 @@ __SharpSL_start: +/* Check for TC6393 - if found we have a Tosa */ + ldr r7, .TOSAID + mov r1, #0x10000000 @ Base address of TC6393 chip + mov r6, #0x03 + ldrh r3, [r1, #8] @ Load TC6393XB Revison: This is 0x0003 + cmp r6, r3 + beq .SHARPEND @ Success -> tosa + +/* Check for pxa270 - if found, branch */ + mrc p15, 0, r4, c0, c0 @ Get Processor ID + and r4, r4, #0xffffff00 + ldr r3, .PXA270ID + cmp r4, r3 + beq .PXA270 + +/* Check for w100 - if not found we have a Poodle */ ldr r1, .W100ADDR @ Base address of w100 chip + regs offset mov r6, #0x31 @ Load Magic Init value @@ -30,7 +47,7 @@ __SharpSL_start: mov r5, #0x3000 .W100LOOP: subs r5, r5, #1 - bne .W100LOOP + bne .W100LOOP mov r6, #0x30 @ Load 2nd Magic Init value str r6, [r1, #0x280] @ to SCRATCH_UMSK @@ -40,45 +57,52 @@ __SharpSL_start: cmp r6, r3 bne .SHARPEND @ We have no w100 - Poodle - mrc p15, 0, r6, c0, c0 @ Get Processor ID - and r6, r6, #0xffffff00 +/* Check for pxa250 - if found we have a Corgi */ ldr r7, .CORGIID ldr r3, .PXA255ID - cmp r6, r3 + cmp r4, r3 blo .SHARPEND @ We have a PXA250 - Corgi - mov r1, #0x0c000000 @ Base address of NAND chip - ldrb r3, [r1, #24] @ Load FLASHCTL - bic r3, r3, #0x11 @ SET NCE - orr r3, r3, #0x0a @ SET CLR + FLWP - strb r3, [r1, #24] @ Save to FLASHCTL - mov r2, #0x90 @ Command "readid" - strb r2, [r1, #20] @ Save to FLASHIO - bic r3, r3, #2 @ CLR CLE - orr r3, r3, #4 @ SET ALE - strb r3, [r1, #24] @ Save to FLASHCTL - mov r2, #0 @ Address 0x00 - strb r2, [r1, #20] @ Save to FLASHIO - bic r3, r3, #4 @ CLR ALE - strb r3, [r1, #24] @ Save to FLASHCTL -.SHARP1: - ldrb r3, [r1, #24] @ Load FLASHCTL - tst r3, #32 @ Is chip ready? - beq .SHARP1 - ldrb r2, [r1, #20] @ NAND Manufacturer ID - ldrb r3, [r1, #20] @ NAND Chip ID +/* Check for 64MiB flash - if found we have a Shepherd */ + bl get_flash_ids ldr r7, .SHEPHERDID cmp r3, #0x76 @ 64MiB flash beq .SHARPEND @ We have Shepherd + +/* Must be a Husky */ ldr r7, .HUSKYID @ Must be Husky b .SHARPEND +.PXA270: +/* Check for 16MiB flash - if found we have Spitz */ + bl get_flash_ids + ldr r7, .SPITZID + cmp r3, #0x73 @ 16MiB flash + beq .SHARPEND @ We have Spitz + +/* Check for a second SCOOP chip - if found we have Borzoi */ + ldr r1, .SCOOP2ADDR + ldr r7, .BORZOIID + mov r6, #0x0140 + strh r6, [r1] + ldrh r6, [r1] + cmp r6, #0x0140 + beq .SHARPEND @ We have Borzoi + +/* Must be Akita */ + ldr r7, .AKITAID + b .SHARPEND @ We have Borzoi + .PXA255ID: .word 0x69052d00 @ PXA255 Processor ID +.PXA270ID: + .word 0x69054100 @ PXA270 Processor ID .W100ID: .word 0x57411002 @ w100 Chip ID .W100ADDR: .word 0x08010000 @ w100 Chip ID Reg Address +.SCOOP2ADDR: + .word 0x08800040 .POODLEID: .word MACH_TYPE_POODLE .CORGIID: @@ -87,6 +111,41 @@ __SharpSL_start: .word MACH_TYPE_SHEPHERD .HUSKYID: .word MACH_TYPE_HUSKY -.SHARPEND: +.TOSAID: + .word MACH_TYPE_TOSA +.SPITZID: + .word MACH_TYPE_SPITZ +.AKITAID: + .word MACH_TYPE_AKITA +.BORZOIID: + .word MACH_TYPE_BORZOI +/* + * Return: r2 - NAND Manufacturer ID + * r3 - NAND Chip ID + * Corrupts: r1 + */ +get_flash_ids: + mov r1, #0x0c000000 @ Base address of NAND chip + ldrb r3, [r1, #24] @ Load FLASHCTL + bic r3, r3, #0x11 @ SET NCE + orr r3, r3, #0x0a @ SET CLR + FLWP + strb r3, [r1, #24] @ Save to FLASHCTL + mov r2, #0x90 @ Command "readid" + strb r2, [r1, #20] @ Save to FLASHIO + bic r3, r3, #2 @ CLR CLE + orr r3, r3, #4 @ SET ALE + strb r3, [r1, #24] @ Save to FLASHCTL + mov r2, #0 @ Address 0x00 + strb r2, [r1, #20] @ Save to FLASHIO + bic r3, r3, #4 @ CLR ALE + strb r3, [r1, #24] @ Save to FLASHCTL +.fids1: + ldrb r3, [r1, #24] @ Load FLASHCTL + tst r3, #32 @ Is chip ready? + beq .fids1 + ldrb r2, [r1, #20] @ NAND Manufacturer ID + ldrb r3, [r1, #20] @ NAND Chip ID + mov pc, lr +.SHARPEND: |