aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
Diffstat
-rw-r--r--drivers/scsi/ahci.c256
-rw-r--r--drivers/scsi/ata_piix.c14
-rw-r--r--drivers/scsi/libata-bmdma.c144
-rw-r--r--drivers/scsi/libata-core.c915
-rw-r--r--drivers/scsi/libata-eh.c1154
-rw-r--r--drivers/scsi/libata-scsi.c136
-rw-r--r--drivers/scsi/libata.h20
-rw-r--r--drivers/scsi/sata_mv.c22
-rw-r--r--drivers/scsi/sata_promise.c7
-rw-r--r--drivers/scsi/sata_sil.c57
-rw-r--r--drivers/scsi/sata_sil24.c350
-rw-r--r--drivers/scsi/sata_sx4.c7
-rw-r--r--drivers/scsi/scsi.c18
-rw-r--r--drivers/scsi/scsi_error.c3
-rw-r--r--drivers/scsi/scsi_lib.c2
-rw-r--r--drivers/scsi/scsi_priv.h1
-rw-r--r--include/linux/ata.h13
-rw-r--r--include/linux/libata.h238
-rw-r--r--include/scsi/scsi_cmnd.h1
-rw-r--r--include/scsi/scsi_eh.h1
-rw-r--r--include/scsi/scsi_host.h1
21 files changed, 2608 insertions, 752 deletions
diff --git a/drivers/scsi/ahci.c b/drivers/scsi/ahci.c
index d23f00230a7..35487e30b0f 100644
--- a/drivers/scsi/ahci.c
+++ b/drivers/scsi/ahci.c
@@ -71,6 +71,7 @@ enum {
AHCI_CMD_CLR_BUSY = (1 << 10),
RX_FIS_D2H_REG = 0x40, /* offset of D2H Register FIS data */
+ RX_FIS_UNK = 0x60, /* offset of Unknown FIS data */
board_ahci = 0,
board_ahci_vt8251 = 1,
@@ -128,15 +129,16 @@ enum {
PORT_IRQ_PIOS_FIS = (1 << 1), /* PIO Setup FIS rx'd */
PORT_IRQ_D2H_REG_FIS = (1 << 0), /* D2H Register FIS rx'd */
- PORT_IRQ_FATAL = PORT_IRQ_TF_ERR |
- PORT_IRQ_HBUS_ERR |
- PORT_IRQ_HBUS_DATA_ERR |
- PORT_IRQ_IF_ERR,
- DEF_PORT_IRQ = PORT_IRQ_FATAL | PORT_IRQ_PHYRDY |
- PORT_IRQ_CONNECT | PORT_IRQ_SG_DONE |
- PORT_IRQ_UNK_FIS | PORT_IRQ_SDB_FIS |
- PORT_IRQ_DMAS_FIS | PORT_IRQ_PIOS_FIS |
- PORT_IRQ_D2H_REG_FIS,
+ PORT_IRQ_FREEZE = PORT_IRQ_HBUS_ERR |
+ PORT_IRQ_IF_ERR |
+ PORT_IRQ_CONNECT |
+ PORT_IRQ_UNK_FIS,
+ PORT_IRQ_ERROR = PORT_IRQ_FREEZE |
+ PORT_IRQ_TF_ERR |
+ PORT_IRQ_HBUS_DATA_ERR,
+ DEF_PORT_IRQ = PORT_IRQ_ERROR | PORT_IRQ_SG_DONE |
+ PORT_IRQ_SDB_FIS | PORT_IRQ_DMAS_FIS |
+ PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS,
/* PORT_CMD bits */
PORT_CMD_ATAPI = (1 << 24), /* Device is ATAPI */
@@ -197,13 +199,15 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc);
static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *regs);
static int ahci_probe_reset(struct ata_port *ap, unsigned int *classes);
static void ahci_irq_clear(struct ata_port *ap);
-static void ahci_eng_timeout(struct ata_port *ap);
static int ahci_port_start(struct ata_port *ap);
static void ahci_port_stop(struct ata_port *ap);
static void ahci_tf_read(struct ata_port *ap, struct ata_taskfile *tf);
static void ahci_qc_prep(struct ata_queued_cmd *qc);
static u8 ahci_check_status(struct ata_port *ap);
-static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
+static void ahci_freeze(struct ata_port *ap);
+static void ahci_thaw(struct ata_port *ap);
+static void ahci_error_handler(struct ata_port *ap);
+static void ahci_post_internal_cmd(struct ata_queued_cmd *qc);
static void ahci_remove_one (struct pci_dev *pdev);
static struct scsi_host_template ahci_sht = {
@@ -237,14 +241,18 @@ static const struct ata_port_operations ahci_ops = {
.qc_prep = ahci_qc_prep,
.qc_issue = ahci_qc_issue,
- .eng_timeout = ahci_eng_timeout,
-
.irq_handler = ahci_interrupt,
.irq_clear = ahci_irq_clear,
.scr_read = ahci_scr_read,
.scr_write = ahci_scr_write,
+ .freeze = ahci_freeze,
+ .thaw = ahci_thaw,
+
+ .error_handler = ahci_error_handler,
+ .post_internal_cmd = ahci_post_internal_cmd,
+
.port_start = ahci_port_start,
.port_stop = ahci_port_stop,
};
@@ -567,7 +575,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class)
DPRINTK("ENTER\n");
- if (!sata_dev_present(ap)) {
+ if (ata_port_offline(ap)) {
DPRINTK("PHY reports no device\n");
*class = ATA_DEV_NONE;
return 0;
@@ -597,7 +605,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class)
/* restart engine */
ahci_start_engine(ap);
- ata_tf_init(ap, &tf, 0);
+ ata_tf_init(ap->device, &tf);
fis = pp->cmd_tbl;
/* issue the first D2H Register FIS */
@@ -640,7 +648,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class)
msleep(150);
*class = ATA_DEV_NONE;
- if (sata_dev_present(ap)) {
+ if (ata_port_online(ap)) {
if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
rc = -EIO;
reason = "device not ready";
@@ -655,8 +663,7 @@ static int ahci_softreset(struct ata_port *ap, unsigned int *class)
fail_restart:
ahci_start_engine(ap);
fail:
- printk(KERN_ERR "ata%u: softreset failed (%s)\n",
- ap->id, reason);
+ ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason);
return rc;
}
@@ -670,7 +677,7 @@ static int ahci_hardreset(struct ata_port *ap, unsigned int *class)
rc = sata_std_hardreset(ap, class);
ahci_start_engine(ap);
- if (rc == 0)
+ if (rc == 0 && ata_port_online(ap))
*class = ahci_dev_classify(ap);
if (*class == ATA_DEV_UNKNOWN)
*class = ATA_DEV_NONE;
@@ -790,109 +797,108 @@ static void ahci_qc_prep(struct ata_queued_cmd *qc)
ahci_fill_cmd_slot(pp, opts);
}
-static void ahci_restart_port(struct ata_port *ap, u32 irq_stat)
+static void ahci_error_intr(struct ata_port *ap, u32 irq_stat)
{
- void __iomem *mmio = ap->host_set->mmio_base;
- void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
- u32 tmp;
+ struct ahci_port_priv *pp = ap->private_data;
+ struct ata_eh_info *ehi = &ap->eh_info;
+ unsigned int err_mask = 0, action = 0;
+ struct ata_queued_cmd *qc;
+ u32 serror;
- if ((ap->device[0].class != ATA_DEV_ATAPI) ||
- ((irq_stat & PORT_IRQ_TF_ERR) == 0))
- printk(KERN_WARNING "ata%u: port reset, "
- "p_is %x is %x pis %x cmd %x tf %x ss %x se %x\n",
- ap->id,
- irq_stat,
- readl(mmio + HOST_IRQ_STAT),
- readl(port_mmio + PORT_IRQ_STAT),
- readl(port_mmio + PORT_CMD),
- readl(port_mmio + PORT_TFDATA),
- readl(port_mmio + PORT_SCR_STAT),
- readl(port_mmio + PORT_SCR_ERR));
-
- /* stop DMA */
- ahci_stop_engine(ap);
+ ata_ehi_clear_desc(ehi);
- /* clear SATA phy error, if any */
- tmp = readl(port_mmio + PORT_SCR_ERR);
- writel(tmp, port_mmio + PORT_SCR_ERR);
+ /* AHCI needs SError cleared; otherwise, it might lock up */
+ serror = ahci_scr_read(ap, SCR_ERROR);
+ ahci_scr_write(ap, SCR_ERROR, serror);
- /* if DRQ/BSY is set, device needs to be reset.
- * if so, issue COMRESET
- */
- tmp = readl(port_mmio + PORT_TFDATA);
- if (tmp & (ATA_BUSY | ATA_DRQ)) {
- writel(0x301, port_mmio + PORT_SCR_CTL);
- readl(port_mmio + PORT_SCR_CTL); /* flush */
- udelay(10);
- writel(0x300, port_mmio + PORT_SCR_CTL);
- readl(port_mmio + PORT_SCR_CTL); /* flush */
+ /* analyze @irq_stat */
+ ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
+
+ if (irq_stat & PORT_IRQ_TF_ERR)
+ err_mask |= AC_ERR_DEV;
+
+ if (irq_stat & (PORT_IRQ_HBUS_ERR | PORT_IRQ_HBUS_DATA_ERR)) {
+ err_mask |= AC_ERR_HOST_BUS;
+ action |= ATA_EH_SOFTRESET;
}
- /* re-start DMA */
- ahci_start_engine(ap);
-}
+ if (irq_stat & PORT_IRQ_IF_ERR) {
+ err_mask |= AC_ERR_ATA_BUS;
+ action |= ATA_EH_SOFTRESET;
+ ata_ehi_push_desc(ehi, ", interface fatal error");
+ }
-static void ahci_eng_timeout(struct ata_port *ap)
-{
- struct ata_host_set *host_set = ap->host_set;
- void __iomem *mmio = host_set->mmio_base;
- void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
- struct ata_queued_cmd *qc;
- unsigned long flags;
+ if (irq_stat & (PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)) {
+ err_mask |= AC_ERR_ATA_BUS;
+ action |= ATA_EH_SOFTRESET;
+ ata_ehi_push_desc(ehi, ", %s", irq_stat & PORT_IRQ_CONNECT ?
+ "connection status changed" : "PHY RDY changed");
+ }
+
+ if (irq_stat & PORT_IRQ_UNK_FIS) {
+ u32 *unk = (u32 *)(pp->rx_fis + RX_FIS_UNK);
- printk(KERN_WARNING "ata%u: handling error/timeout\n", ap->id);
+ err_mask |= AC_ERR_HSM;
+ action |= ATA_EH_SOFTRESET;
+ ata_ehi_push_desc(ehi, ", unknown FIS %08x %08x %08x %08x",
+ unk[0], unk[1], unk[2], unk[3]);
+ }
- spin_lock_irqsave(&host_set->lock, flags);
+ /* okay, let's hand over to EH */
+ ehi->serror |= serror;
+ ehi->action |= action;
- ahci_restart_port(ap, readl(port_mmio + PORT_IRQ_STAT));
qc = ata_qc_from_tag(ap, ap->active_tag);
- qc->err_mask |= AC_ERR_TIMEOUT;
-
- spin_unlock_irqrestore(&host_set->lock, flags);
+ if (qc)
+ qc->err_mask |= err_mask;
+ else
+ ehi->err_mask |= err_mask;
- ata_eh_qc_complete(qc);
+ if (irq_stat & PORT_IRQ_FREEZE)
+ ata_port_freeze(ap);
+ else
+ ata_port_abort(ap);
}
-static inline int ahci_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc)
+static void ahci_host_intr(struct ata_port *ap)
{
void __iomem *mmio = ap->host_set->mmio_base;
void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
- u32 status, serr, ci;
-
- serr = readl(port_mmio + PORT_SCR_ERR);
- writel(serr, port_mmio + PORT_SCR_ERR);
+ struct ata_queued_cmd *qc;
+ u32 status, ci;
status = readl(port_mmio + PORT_IRQ_STAT);
writel(status, port_mmio + PORT_IRQ_STAT);
- ci = readl(port_mmio + PORT_CMD_ISSUE);
- if (likely((ci & 0x1) == 0)) {
- if (qc) {
- WARN_ON(qc->err_mask);
+ if (unlikely(status & PORT_IRQ_ERROR)) {
+ ahci_error_intr(ap, status);
+ return;
+ }
+
+ if ((qc = ata_qc_from_tag(ap, ap->active_tag))) {
+ ci = readl(port_mmio + PORT_CMD_ISSUE);
+ if ((ci & 0x1) == 0) {
ata_qc_complete(qc);
- qc = NULL;
+ return;
}
}
- if (status & PORT_IRQ_FATAL) {
- unsigned int err_mask;
- if (status & PORT_IRQ_TF_ERR)
- err_mask = AC_ERR_DEV;
- else if (status & PORT_IRQ_IF_ERR)
- err_mask = AC_ERR_ATA_BUS;
- else
- err_mask = AC_ERR_HOST_BUS;
+ /* hmmm... a spurious interupt */
- /* command processing has stopped due to error; restart */
- ahci_restart_port(ap, status);
+ /* ignore interim PIO setup fis interrupts */
+ if (ata_tag_valid(ap->active_tag)) {
+ struct ata_queued_cmd *qc =
+ ata_qc_from_tag(ap, ap->active_tag);
- if (qc) {
- qc->err_mask |= err_mask;
- ata_qc_complete(qc);
- }
+ if (qc && qc->tf.protocol == ATA_PROT_PIO &&
+ (status & PORT_IRQ_PIOS_FIS))
+ return;
}
- return 1;
+ if (ata_ratelimit())
+ ata_port_printk(ap, KERN_INFO, "spurious interrupt "
+ "(irq_stat 0x%x active_tag %d)\n",
+ status, ap->active_tag);
}
static void ahci_irq_clear(struct ata_port *ap)
@@ -929,14 +935,7 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *
ap = host_set->ports[i];
if (ap) {
- struct ata_queued_cmd *qc;
- qc = ata_qc_from_tag(ap, ap->active_tag);
- if (!ahci_host_intr(ap, qc))
- if (ata_ratelimit())
- dev_printk(KERN_WARNING, host_set->dev,
- "unhandled interrupt on port %u\n",
- i);
-
+ ahci_host_intr(ap);
VPRINTK("port %u\n", i);
} else {
VPRINTK("port %u (no irq)\n", i);
@@ -953,7 +952,7 @@ static irqreturn_t ahci_interrupt (int irq, void *dev_instance, struct pt_regs *
handled = 1;
}
- spin_unlock(&host_set->lock);
+ spin_unlock(&host_set->lock);
VPRINTK("EXIT\n");
@@ -971,6 +970,56 @@ static unsigned int ahci_qc_issue(struct ata_queued_cmd *qc)
return 0;
}
+static void ahci_freeze(struct ata_port *ap)
+{
+ void __iomem *mmio = ap->host_set->mmio_base;
+ void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+
+ /* turn IRQ off */
+ writel(0, port_mmio + PORT_IRQ_MASK);
+}
+
+static void ahci_thaw(struct ata_port *ap)
+{
+ void __iomem *mmio = ap->host_set->mmio_base;
+ void __iomem *port_mmio = ahci_port_base(mmio, ap->port_no);
+ u32 tmp;
+
+ /* clear IRQ */
+ tmp = readl(port_mmio + PORT_IRQ_STAT);
+ writel(tmp, port_mmio + PORT_IRQ_STAT);
+ writel(1 << ap->id, mmio + HOST_IRQ_STAT);
+
+ /* turn IRQ back on */
+ writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK);
+}
+
+static void ahci_error_handler(struct ata_port *ap)
+{
+ if (!(ap->flags & ATA_FLAG_FROZEN)) {
+ /* restart engine */
+ ahci_stop_engine(ap);
+ ahci_start_engine(ap);
+ }
+
+ /* perform recovery */
+ ata_do_eh(ap, ahci_softreset, ahci_hardreset, ahci_postreset);
+}
+
+static void ahci_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ if (qc->flags & ATA_QCFLAG_FAILED)
+ qc->err_mask |= AC_ERR_OTHER;
+
+ if (qc->err_mask) {
+ /* make DMA engine forget about the failed command */
+ ahci_stop_engine(ap);
+ ahci_start_engine(ap);
+ }
+}
+
static void ahci_setup_port(struct ata_ioports *port, unsigned long base,
unsigned int port_idx)
{
@@ -1115,9 +1164,6 @@ static int ahci_host_init(struct ata_probe_ent *probe_ent)
writel(tmp, port_mmio + PORT_IRQ_STAT);
writel(1 << i, mmio + HOST_IRQ_STAT);
-
- /* set irq mask (enables interrupts) */
- writel(DEF_PORT_IRQ, port_mmio + PORT_IRQ_MASK);
}
tmp = readl(mmio + HOST_CTL);
diff --git a/drivers/scsi/ata_piix.c b/drivers/scsi/ata_piix.c
index 62dabf74188..e3184a77a60 100644
--- a/drivers/scsi/ata_piix.c
+++ b/drivers/scsi/ata_piix.c
@@ -243,7 +243,10 @@ static const struct ata_port_operations piix_pata_ops = {
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
@@ -271,7 +274,10 @@ static const struct ata_port_operations piix_sata_ops = {
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+ .freeze = ata_bmdma_freeze,
+ .thaw = ata_bmdma_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
@@ -484,7 +490,7 @@ static int piix_pata_probe_reset(struct ata_port *ap, unsigned int *classes)
struct pci_dev *pdev = to_pci_dev(ap->host_set->dev);
if (!pci_test_config_bits(pdev, &piix_enable_bits[ap->hard_port_no])) {
- printk(KERN_INFO "ata%u: port disabled. ignoring.\n", ap->id);
+ ata_port_printk(ap, KERN_INFO, "port disabled. ignoring.\n");
return 0;
}
@@ -565,7 +571,7 @@ static unsigned int piix_sata_probe (struct ata_port *ap)
static int piix_sata_probe_reset(struct ata_port *ap, unsigned int *classes)
{
if (!piix_sata_probe(ap)) {
- printk(KERN_INFO "ata%u: SATA port has no device.\n", ap->id);
+ ata_port_printk(ap, KERN_INFO, "SATA port has no device.\n");
return 0;
}
diff --git a/drivers/scsi/libata-bmdma.c b/drivers/scsi/libata-bmdma.c
index 835dff0bafd..49eff18a67e 100644
--- a/drivers/scsi/libata-bmdma.c
+++ b/drivers/scsi/libata-bmdma.c
@@ -652,6 +652,150 @@ void ata_bmdma_stop(struct ata_queued_cmd *qc)
ata_altstatus(ap); /* dummy read */
}
+/**
+ * ata_bmdma_freeze - Freeze BMDMA controller port
+ * @ap: port to freeze
+ *
+ * Freeze BMDMA controller port.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+void ata_bmdma_freeze(struct ata_port *ap)
+{
+ struct ata_ioports *ioaddr = &ap->ioaddr;
+
+ ap->ctl |= ATA_NIEN;
+ ap->last_ctl = ap->ctl;
+
+ if (ap->flags & ATA_FLAG_MMIO)
+ writeb(ap->ctl, (void __iomem *)ioaddr->ctl_addr);
+ else
+ outb(ap->ctl, ioaddr->ctl_addr);
+}
+
+/**
+ * ata_bmdma_thaw - Thaw BMDMA controller port
+ * @ap: port to thaw
+ *
+ * Thaw BMDMA controller port.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ */
+void ata_bmdma_thaw(struct ata_port *ap)
+{
+ /* clear & re-enable interrupts */
+ ata_chk_status(ap);
+ ap->ops->irq_clear(ap);
+ if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */
+ ata_irq_on(ap);
+}
+
+/**
+ * ata_bmdma_drive_eh - Perform EH with given methods for BMDMA controller
+ * @ap: port to handle error for
+ * @softreset: softreset method (can be NULL)
+ * @hardreset: hardreset method (can be NULL)
+ * @postreset: postreset method (can be NULL)
+ *
+ * Handle error for ATA BMDMA controller. It can handle both
+ * PATA and SATA controllers. Many controllers should be able to
+ * use this EH as-is or with some added handling before and
+ * after.
+ *
+ * This function is intended to be used for constructing
+ * ->error_handler callback by low level drivers.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+void ata_bmdma_drive_eh(struct ata_port *ap, ata_reset_fn_t softreset,
+ ata_reset_fn_t hardreset, ata_postreset_fn_t postreset)
+{
+ struct ata_host_set *host_set = ap->host_set;
+ struct ata_eh_context *ehc = &ap->eh_context;
+ struct ata_queued_cmd *qc;
+ unsigned long flags;
+ int thaw = 0;
+
+ qc = __ata_qc_from_tag(ap, ap->active_tag);
+ if (qc && !(qc->flags & ATA_QCFLAG_FAILED))
+ qc = NULL;
+
+ /* reset PIO HSM and stop DMA engine */
+ spin_lock_irqsave(&host_set->lock, flags);
+
+ ap->flags &= ~ATA_FLAG_NOINTR;
+ ap->hsm_task_state = HSM_ST_IDLE;
+
+ if (qc && (qc->tf.protocol == ATA_PROT_DMA ||
+ qc->tf.protocol == ATA_PROT_ATAPI_DMA)) {
+ u8 host_stat;
+
+ host_stat = ata_bmdma_status(ap);
+
+ ata_ehi_push_desc(&ehc->i, "BMDMA stat 0x%x", host_stat);
+
+ /* BMDMA controllers indicate host bus error by
+ * setting DMA_ERR bit and timing out. As it wasn't
+ * really a timeout event, adjust error mask and
+ * cancel frozen state.
+ */
+ if (qc->err_mask == AC_ERR_TIMEOUT && host_stat & ATA_DMA_ERR) {
+ qc->err_mask = AC_ERR_HOST_BUS;
+ thaw = 1;
+ }
+
+ ap->ops->bmdma_stop(qc);
+ }
+
+ ata_altstatus(ap);
+ ata_chk_status(ap);
+ ap->ops->irq_clear(ap);
+
+ spin_unlock_irqrestore(&host_set->lock, flags);
+
+ if (thaw)
+ ata_eh_thaw_port(ap);
+
+ /* PIO and DMA engines have been stopped, perform recovery */
+ ata_do_eh(ap, softreset, hardreset, postreset);
+}
+
+/**
+ * ata_bmdma_error_handler - Stock error handler for BMDMA controller
+ * @ap: port to handle error for
+ *
+ * Stock error handler for BMDMA controller.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+void ata_bmdma_error_handler(struct ata_port *ap)
+{
+ ata_reset_fn_t hardreset;
+
+ hardreset = NULL;
+ if (sata_scr_valid(ap))
+ hardreset = sata_std_hardreset;
+
+ ata_bmdma_drive_eh(ap, ata_std_softreset, hardreset, ata_std_postreset);
+}
+
+/**
+ * ata_bmdma_post_internal_cmd - Stock post_internal_cmd for
+ * BMDMA controller
+ * @qc: internal command to clean up
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep)
+ */
+void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+ ata_bmdma_stop(qc);
+}
+
#ifdef CONFIG_PCI
static struct ata_probe_ent *
ata_probe_ent_alloc(struct device *dev, const struct ata_port_info *port)
diff --git a/drivers/scsi/libata-core.c b/drivers/scsi/libata-core.c
index 5d38a6cc573..c859b96b891 100644
--- a/drivers/scsi/libata-core.c
+++ b/drivers/scsi/libata-core.c
@@ -61,13 +61,10 @@
#include "libata.h"
-static unsigned int ata_dev_init_params(struct ata_port *ap,
- struct ata_device *dev,
- u16 heads,
- u16 sectors);
-static unsigned int ata_dev_set_xfermode(struct ata_port *ap,
- struct ata_device *dev);
-static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev);
+static unsigned int ata_dev_init_params(struct ata_device *dev,
+ u16 heads, u16 sectors);
+static unsigned int ata_dev_set_xfermode(struct ata_device *dev);
+static void ata_dev_xfermask(struct ata_device *dev);
static unsigned int ata_unique_id = 1;
static struct workqueue_struct *ata_wq;
@@ -412,11 +409,10 @@ static const char *sata_spd_string(unsigned int spd)
return spd_str[spd - 1];
}
-void ata_dev_disable(struct ata_port *ap, struct ata_device *dev)
+void ata_dev_disable(struct ata_device *dev)
{
if (ata_dev_enabled(dev)) {
- printk(KERN_WARNING "ata%u: dev %u disabled\n",
- ap->id, dev->devno);
+ ata_dev_printk(dev, KERN_WARNING, "disabled\n");
dev->class++;
}
}
@@ -955,13 +951,11 @@ void ata_qc_complete_internal(struct ata_queued_cmd *qc)
{
struct completion *waiting = qc->private_data;
- qc->ap->ops->tf_read(qc->ap, &qc->tf);
complete(waiting);
}
/**
* ata_exec_internal - execute libata internal command
- * @ap: Port to which the command is sent
* @dev: Device to which the command is sent
* @tf: Taskfile registers for the command and the result
* @cdb: CDB for packet command
@@ -979,24 +973,57 @@ void ata_qc_complete_internal(struct ata_queued_cmd *qc)
* None. Should be called with kernel context, might sleep.
*/
-unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
+unsigned ata_exec_internal(struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
int dma_dir, void *buf, unsigned int buflen)
{
+ struct ata_port *ap = dev->ap;
u8 command = tf->command;
struct ata_queued_cmd *qc;
+ unsigned int tag, preempted_tag;
DECLARE_COMPLETION(wait);
unsigned long flags;
unsigned int err_mask;
+ int rc;
spin_lock_irqsave(&ap->host_set->lock, flags);
- qc = ata_qc_new_init(ap, dev);
- BUG_ON(qc == NULL);
+ /* no internal command while frozen */
+ if (ap->flags & ATA_FLAG_FROZEN) {
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+ return AC_ERR_SYSTEM;
+ }
+
+ /* initialize internal qc */
+
+ /* XXX: Tag 0 is used for drivers with legacy EH as some
+ * drivers choke if any other tag is given. This breaks
+ * ata_tag_internal() test for those drivers. Don't use new
+ * EH stuff without converting to it.
+ */
+ if (ap->ops->error_handler)
+ tag = ATA_TAG_INTERNAL;
+ else
+ tag = 0;
+
+ if (test_and_set_bit(tag, &ap->qactive))
+ BUG();
+ qc = __ata_qc_from_tag(ap, tag);
+
+ qc->tag = tag;
+ qc->scsicmd = NULL;
+ qc->ap = ap;
+ qc->dev = dev;
+ ata_qc_reinit(qc);
+ preempted_tag = ap->active_tag;
+ ap->active_tag = ATA_TAG_POISON;
+
+ /* prepare & issue qc */
qc->tf = *tf;
if (cdb)
memcpy(qc->cdb, cdb, ATAPI_CDB_LEN);
+ qc->flags |= ATA_QCFLAG_RESULT_TF;
qc->dma_dir = dma_dir;
if (dma_dir != DMA_NONE) {
ata_sg_init_one(qc, buf, buflen);
@@ -1010,31 +1037,51 @@ unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
spin_unlock_irqrestore(&ap->host_set->lock, flags);
- if (!wait_for_completion_timeout(&wait, ATA_TMOUT_INTERNAL)) {
- ata_port_flush_task(ap);
+ rc = wait_for_completion_timeout(&wait, ATA_TMOUT_INTERNAL);
+
+ ata_port_flush_task(ap);
+ if (!rc) {
spin_lock_irqsave(&ap->host_set->lock, flags);
/* We're racing with irq here. If we lose, the
* following test prevents us from completing the qc
- * again. If completion irq occurs after here but
- * before the caller cleans up, it will result in a
- * spurious interrupt. We can live with that.
+ * twice. If we win, the port is frozen and will be
+ * cleaned up by ->post_internal_cmd().
*/
if (qc->flags & ATA_QCFLAG_ACTIVE) {
- qc->err_mask = AC_ERR_TIMEOUT;
- ata_qc_complete(qc);
- printk(KERN_WARNING "ata%u: qc timeout (cmd 0x%x)\n",
- ap->id, command);
+ qc->err_mask |= AC_ERR_TIMEOUT;
+
+ if (ap->ops->error_handler)
+ ata_port_freeze(ap);
+ else
+ ata_qc_complete(qc);
+
+ ata_dev_printk(dev, KERN_WARNING,
+ "qc timeout (cmd 0x%x)\n", command);
}
spin_unlock_irqrestore(&ap->host_set->lock, flags);
}
- *tf = qc->tf;
+ /* do post_internal_cmd */
+ if (ap->ops->post_internal_cmd)
+ ap->ops->post_internal_cmd(qc);
+
+ if (qc->flags & ATA_QCFLAG_FAILED && !qc->err_mask) {
+ ata_dev_printk(dev, KERN_WARNING, "zero err_mask for failed "
+ "internal command, assuming AC_ERR_OTHER\n");
+ qc->err_mask |= AC_ERR_OTHER;
+ }
+
+ /* finish up */
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+
+ *tf = qc->result_tf;
err_mask = qc->err_mask;
ata_qc_free(qc);
+ ap->active_tag = preempted_tag;
/* XXX - Some LLDDs (sata_mv) disable port on command failure.
* Until those drivers are fixed, we detect the condition
@@ -1052,6 +1099,8 @@ unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
ata_port_probe(ap);
}
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
return err_mask;
}
@@ -1090,11 +1139,10 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev)
/**
* ata_dev_read_id - Read ID data from the specified device
- * @ap: port on which target device resides
* @dev: target device
* @p_class: pointer to class of the target device (may be changed)
* @post_reset: is this read ID post-reset?
- * @p_id: read IDENTIFY page (newly allocated)
+ * @id: buffer to read IDENTIFY data into
*
* Read ID data from the specified device. ATA_CMD_ID_ATA is
* performed on ATA devices and ATA_CMD_ID_ATAPI on ATAPI
@@ -1107,13 +1155,13 @@ unsigned int ata_pio_need_iordy(const struct ata_device *adev)
* RETURNS:
* 0 on success, -errno otherwise.
*/
-static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev,
- unsigned int *p_class, int post_reset, u16 **p_id)
+static int ata_dev_read_id(struct ata_device *dev, unsigned int *p_class,
+ int post_reset, u16 *id)
{
+ struct ata_port *ap = dev->ap;
unsigned int class = *p_class;
struct ata_taskfile tf;
unsigned int err_mask = 0;
- u16 *id;
const char *reason;
int rc;
@@ -1121,15 +1169,8 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev,
ata_dev_select(ap, dev->devno, 1, 1); /* select device 0/1 */
- id = kmalloc(sizeof(id[0]) * ATA_ID_WORDS, GFP_KERNEL);
- if (id == NULL) {
- rc = -ENOMEM;
- reason = "out of memory";
- goto err_out;
- }
-
retry:
- ata_tf_init(ap, &tf, dev->devno);
+ ata_tf_init(dev, &tf);
switch (class) {
case ATA_DEV_ATA:
@@ -1146,7 +1187,7 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev,
tf.protocol = ATA_PROT_PIO;
- err_mask = ata_exec_internal(ap, dev, &tf, NULL, DMA_FROM_DEVICE,
+ err_mask = ata_exec_internal(dev, &tf, NULL, DMA_FROM_DEVICE,
id, sizeof(id[0]) * ATA_ID_WORDS);
if (err_mask) {
rc = -EIO;
@@ -1173,7 +1214,7 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev,
* Some drives were very specific about that exact sequence.
*/
if (ata_id_major_version(id) < 4 || !ata_id_has_lba(id)) {
- err_mask = ata_dev_init_params(ap, dev, id[3], id[6]);
+ err_mask = ata_dev_init_params(dev, id[3], id[6]);
if (err_mask) {
rc = -EIO;
reason = "INIT_DEV_PARAMS failed";
@@ -1189,25 +1230,22 @@ static int ata_dev_read_id(struct ata_port *ap, struct ata_device *dev,
}
*p_class = class;
- *p_id = id;
+
return 0;
err_out:
- printk(KERN_WARNING "ata%u: dev %u failed to IDENTIFY (%s)\n",
- ap->id, dev->devno, reason);
- kfree(id);
+ ata_dev_printk(dev, KERN_WARNING, "failed to IDENTIFY "
+ "(%s, err_mask=0x%x)\n", reason, err_mask);
return rc;
}
-static inline u8 ata_dev_knobble(const struct ata_port *ap,
- struct ata_device *dev)
+static inline u8 ata_dev_knobble(struct ata_device *dev)
{
- return ((ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id)));
+ return ((dev->ap->cbl == ATA_CBL_SATA) && (!ata_id_is_sata(dev->id)));
}
/**
* ata_dev_configure - Configure the specified ATA/ATAPI device
- * @ap: Port on which target device resides
* @dev: Target device to configure
* @print_info: Enable device info printout
*
@@ -1220,9 +1258,9 @@ static inline u8 ata_dev_knobble(const struct ata_port *ap,
* RETURNS:
* 0 on success, -errno otherwise
*/
-static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev,
- int print_info)
+static int ata_dev_configure(struct ata_device *dev, int print_info)
{
+ struct ata_port *ap = dev->ap;
const u16 *id = dev->id;
unsigned int xfer_mask;
int i, rc;
@@ -1237,10 +1275,10 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev,
/* print device capabilities */
if (print_info)
- printk(KERN_DEBUG "ata%u: dev %u cfg 49:%04x 82:%04x 83:%04x "
- "84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n",
- ap->id, dev->devno, id[49], id[82], id[83],
- id[84], id[85], id[86], id[87], id[88]);
+ ata_dev_printk(dev, KERN_DEBUG, "cfg 49:%04x 82:%04x 83:%04x "
+ "84:%04x 85:%04x 86:%04x 87:%04x 88:%04x\n",
+ id[49], id[82], id[83], id[84],
+ id[85], id[86], id[87], id[88]);
/* initialize to-be-configured parameters */
dev->flags &= ~ATA_DFLAG_CFG_MASK;
@@ -1276,13 +1314,12 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev,
/* print device info to dmesg */
if (print_info)
- printk(KERN_INFO "ata%u: dev %u ATA-%d, "
- "max %s, %Lu sectors: %s\n",
- ap->id, dev->devno,
- ata_id_major_version(id),
- ata_mode_string(xfer_mask),
- (unsigned long long)dev->n_sectors,
- lba_desc);
+ ata_dev_printk(dev, KERN_INFO, "ATA-%d, "
+ "max %s, %Lu sectors: %s\n",
+ ata_id_major_version(id),
+ ata_mode_string(xfer_mask),
+ (unsigned long long)dev->n_sectors,
+ lba_desc);
} else {
/* CHS */
@@ -1300,13 +1337,12 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev,
/* print device info to dmesg */
if (print_info)
- printk(KERN_INFO "ata%u: dev %u ATA-%d, "
- "max %s, %Lu sectors: CHS %u/%u/%u\n",
- ap->id, dev->devno,
- ata_id_major_version(id),
- ata_mode_string(xfer_mask),
- (unsigned long long)dev->n_sectors,
- dev->cylinders, dev->heads, dev->sectors);
+ ata_dev_printk(dev, KERN_INFO, "ATA-%d, "
+ "max %s, %Lu sectors: CHS %u/%u/%u\n",
+ ata_id_major_version(id),
+ ata_mode_string(xfer_mask),
+ (unsigned long long)dev->n_sectors,
+ dev->cylinders, dev->heads, dev->sectors);
}
if (dev->id[59] & 0x100) {
@@ -1324,7 +1360,8 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev,
rc = atapi_cdb_len(id);
if ((rc < 12) || (rc > ATAPI_CDB_LEN)) {
- printk(KERN_WARNING "ata%u: unsupported CDB len\n", ap->id);
+ ata_dev_printk(dev, KERN_WARNING,
+ "unsupported CDB len\n");
rc = -EINVAL;
goto err_out_nosup;
}
@@ -1337,9 +1374,9 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev,
/* print device info to dmesg */
if (print_info)
- printk(KERN_INFO "ata%u: dev %u ATAPI, max %s%s\n",
- ap->id, dev->devno, ata_mode_string(xfer_mask),
- cdb_intr_string);
+ ata_dev_printk(dev, KERN_INFO, "ATAPI, max %s%s\n",
+ ata_mode_string(xfer_mask),
+ cdb_intr_string);
}
ap->host->max_cmd_len = 0;
@@ -1349,10 +1386,10 @@ static int ata_dev_configure(struct ata_port *ap, struct ata_device *dev,
ap->device[i].cdb_len);
/* limit bridge transfers to udma5, 200 sectors */
- if (ata_dev_knobble(ap, dev)) {
+ if (ata_dev_knobble(dev)) {
if (print_info)
- printk(KERN_INFO "ata%u(%u): applying bridge limits\n",
- ap->id, dev->devno);
+ ata_dev_printk(dev, KERN_INFO,
+ "applying bridge limits\n");
dev->udma_mask &= ATA_UDMA5;
dev->max_sectors = ATA_MAX_SECTORS;
}
@@ -1405,15 +1442,18 @@ static int ata_bus_probe(struct ata_port *ap)
if (ap->ops->probe_reset) {
rc = ap->ops->probe_reset(ap, classes);
if (rc) {
- printk("ata%u: reset failed (errno=%d)\n", ap->id, rc);
+ ata_port_printk(ap, KERN_ERR,
+ "reset failed (errno=%d)\n", rc);
return rc;
}
} else {
ap->ops->phy_reset(ap);
- if (!(ap->flags & ATA_FLAG_DISABLED))
- for (i = 0; i < ATA_MAX_DEVICES; i++)
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ if (!(ap->flags & ATA_FLAG_DISABLED))
classes[i] = ap->device[i].class;
+ ap->device[i].class = ATA_DEV_UNKNOWN;
+ }
ata_port_probe(ap);
}
@@ -1432,32 +1472,17 @@ static int ata_bus_probe(struct ata_port *ap)
if (!ata_dev_enabled(dev))
continue;
- kfree(dev->id);
- dev->id = NULL;
- rc = ata_dev_read_id(ap, dev, &dev->class, 1, &dev->id);
+ rc = ata_dev_read_id(dev, &dev->class, 1, dev->id);
if (rc)
goto fail;
- rc = ata_dev_configure(ap, dev, 1);
+ rc = ata_dev_configure(dev, 1);
if (rc)
goto fail;
}
/* configure transfer mode */
- if (ap->ops->set_mode) {
- /* FIXME: make ->set_mode handle no device case and
- * return error code and failing device on failure as
- * ata_set_mode() does.
- */
- for (i = 0; i < ATA_MAX_DEVICES; i++)
- if (ata_dev_enabled(&ap->device[i])) {
- ap->ops->set_mode(ap);
- break;
- }
- rc = 0;
- } else
- rc = ata_set_mode(ap, &dev);
-
+ rc = ata_set_mode(ap, &dev);
if (rc) {
down_xfermask = 1;
goto fail;
@@ -1479,18 +1504,18 @@ static int ata_bus_probe(struct ata_port *ap)
tries[dev->devno] = 0;
break;
case -EIO:
- ata_down_sata_spd_limit(ap);
+ sata_down_spd_limit(ap);
/* fall through */
default:
tries[dev->devno]--;
if (down_xfermask &&
- ata_down_xfermask_limit(ap, dev, tries[dev->devno] == 1))
+ ata_down_xfermask_limit(dev, tries[dev->devno] == 1))
tries[dev->devno] = 0;
}
if (!tries[dev->devno]) {
- ata_down_xfermask_limit(ap, dev, 1);
- ata_dev_disable(ap, dev);
+ ata_down_xfermask_limit(dev, 1);
+ ata_dev_disable(dev);
}
goto retry;
@@ -1525,21 +1550,19 @@ static void sata_print_link_status(struct ata_port *ap)
{
u32 sstatus, scontrol, tmp;
- if (!ap->ops->scr_read)
+ if (sata_scr_read(ap, SCR_STATUS, &sstatus))
return;
+ sata_scr_read(ap, SCR_CONTROL, &scontrol);
- sstatus = scr_read(ap, SCR_STATUS);
- scontrol = scr_read(ap, SCR_CONTROL);
-
- if (sata_dev_present(ap)) {
+ if (ata_port_online(ap)) {
tmp = (sstatus >> 4) & 0xf;
- printk(KERN_INFO
- "ata%u: SATA link up %s (SStatus %X SControl %X)\n",
- ap->id, sata_spd_string(tmp), sstatus, scontrol);
+ ata_port_printk(ap, KERN_INFO,
+ "SATA link up %s (SStatus %X SControl %X)\n",
+ sata_spd_string(tmp), sstatus, scontrol);
} else {
- printk(KERN_INFO
- "ata%u: SATA link down (SStatus %X SControl %X)\n",
- ap->id, sstatus, scontrol);
+ ata_port_printk(ap, KERN_INFO,
+ "SATA link down (SStatus %X SControl %X)\n",
+ sstatus, scontrol);
}
}
@@ -1562,17 +1585,18 @@ void __sata_phy_reset(struct ata_port *ap)
if (ap->flags & ATA_FLAG_SATA_RESET) {
/* issue phy wake/reset */
- scr_write_flush(ap, SCR_CONTROL, 0x301);
+ sata_scr_write_flush(ap, SCR_CONTROL, 0x301);
/* Couldn't find anything in SATA I/II specs, but
* AHCI-1.1 10.4.2 says at least 1 ms. */
mdelay(1);
}
- scr_write_flush(ap, SCR_CONTROL, 0x300); /* phy wake/clear reset */
+ /* phy wake/clear reset */
+ sata_scr_write_flush(ap, SCR_CONTROL, 0x300);
/* wait for phy to become ready, if necessary */
do {
msleep(200);
- sstatus = scr_read(ap, SCR_STATUS);
+ sata_scr_read(ap, SCR_STATUS, &sstatus);
if ((sstatus & 0xf) != 1)
break;
} while (time_before(jiffies, timeout));
@@ -1581,7 +1605,7 @@ void __sata_phy_reset(struct ata_port *ap)
sata_print_link_status(ap);
/* TODO: phy layer with polling, timeouts, etc. */
- if (sata_dev_present(ap))
+ if (!ata_port_offline(ap))
ata_port_probe(ap);
else
ata_port_disable(ap);
@@ -1618,15 +1642,15 @@ void sata_phy_reset(struct ata_port *ap)
/**
* ata_dev_pair - return other device on cable
- * @ap: port
* @adev: device
*
* Obtain the other device on the same cable, or if none is
* present NULL is returned
*/
-struct ata_device *ata_dev_pair(struct ata_port *ap, struct ata_device *adev)
+struct ata_device *ata_dev_pair(struct ata_device *adev)
{
+ struct ata_port *ap = adev->ap;
struct ata_device *pair = &ap->device[1 - adev->devno];
if (!ata_dev_enabled(pair))
return NULL;
@@ -1654,12 +1678,12 @@ void ata_port_disable(struct ata_port *ap)
}
/**
- * ata_down_sata_spd_limit - adjust SATA spd limit downward
+ * sata_down_spd_limit - adjust SATA spd limit downward
* @ap: Port to adjust SATA spd limit for
*
* Adjust SATA spd limit of @ap downward. Note that this
* function only adjusts the limit. The change must be applied
- * using ata_set_sata_spd().
+ * using sata_set_spd().
*
* LOCKING:
* Inherited from caller.
@@ -1667,13 +1691,14 @@ void ata_port_disable(struct ata_port *ap)
* RETURNS:
* 0 on success, negative errno on failure
*/
-int ata_down_sata_spd_limit(struct ata_port *ap)
+int sata_down_spd_limit(struct ata_port *ap)
{
- u32 spd, mask;
- int highbit;
+ u32 sstatus, spd, mask;
+ int rc, highbit;
- if (ap->cbl != ATA_CBL_SATA || !ap->ops->scr_read)
- return -EOPNOTSUPP;
+ rc = sata_scr_read(ap, SCR_STATUS, &sstatus);
+ if (rc)
+ return rc;
mask = ap->sata_spd_limit;
if (mask <= 1)
@@ -1681,7 +1706,7 @@ int ata_down_sata_spd_limit(struct ata_port *ap)
highbit = fls(mask) - 1;
mask &= ~(1 << highbit);
- spd = (scr_read(ap, SCR_STATUS) >> 4) & 0xf;
+ spd = (sstatus >> 4) & 0xf;
if (spd <= 1)
return -EINVAL;
spd--;
@@ -1691,13 +1716,13 @@ int ata_down_sata_spd_limit(struct ata_port *ap)
ap->sata_spd_limit = mask;
- printk(KERN_WARNING "ata%u: limiting SATA link speed to %s\n",
- ap->id, sata_spd_string(fls(mask)));
+ ata_port_printk(ap, KERN_WARNING, "limiting SATA link speed to %s\n",
+ sata_spd_string(fls(mask)));
return 0;
}
-static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol)
+static int __sata_set_spd_needed(struct ata_port *ap, u32 *scontrol)
{
u32 spd, limit;
@@ -1713,7 +1738,7 @@ static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol)
}
/**
- * ata_set_sata_spd_needed - is SATA spd configuration needed
+ * sata_set_spd_needed - is SATA spd configuration needed
* @ap: Port in question
*
* Test whether the spd limit in SControl matches
@@ -1727,20 +1752,18 @@ static int __ata_set_sata_spd_needed(struct ata_port *ap, u32 *scontrol)
* RETURNS:
* 1 if SATA spd configuration is needed, 0 otherwise.
*/
-int ata_set_sata_spd_needed(struct ata_port *ap)
+int sata_set_spd_needed(struct ata_port *ap)
{
u32 scontrol;
- if (ap->cbl != ATA_CBL_SATA || !ap->ops->scr_read)
+ if (sata_scr_read(ap, SCR_CONTROL, &scontrol))
return 0;
- scontrol = scr_read(ap, SCR_CONTROL);
-
- return __ata_set_sata_spd_needed(ap, &scontrol);
+ return __sata_set_spd_needed(ap, &scontrol);
}
/**
- * ata_set_sata_spd - set SATA spd according to spd limit
+ * sata_set_spd - set SATA spd according to spd limit
* @ap: Port to set SATA spd for
*
* Set SATA spd of @ap according to sata_spd_limit.
@@ -1750,20 +1773,22 @@ int ata_set_sata_spd_needed(struct ata_port *ap)
*
* RETURNS:
* 0 if spd doesn't need to be changed, 1 if spd has been
- * changed. -EOPNOTSUPP if SCR registers are inaccessible.
+ * changed. Negative errno if SCR registers are inaccessible.
*/
-int ata_set_sata_spd(struct ata_port *ap)
+int sata_set_spd(struct ata_port *ap)
{
u32 scontrol;
+ int rc;
- if (ap->cbl != ATA_CBL_SATA || !ap->ops->scr_read)
- return -EOPNOTSUPP;
+ if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol)))
+ return rc;
- scontrol = scr_read(ap, SCR_CONTROL);
- if (!__ata_set_sata_spd_needed(ap, &scontrol))
+ if (!__sata_set_spd_needed(ap, &scontrol))
return 0;
- scr_write(ap, SCR_CONTROL, scontrol);
+ if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol)))
+ return rc;
+
return 1;
}
@@ -1917,7 +1942,6 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
/**
* ata_down_xfermask_limit - adjust dev xfer masks downward
- * @ap: Port associated with device @dev
* @dev: Device to adjust xfer masks
* @force_pio0: Force PIO0
*
@@ -1931,8 +1955,7 @@ int ata_timing_compute(struct ata_device *adev, unsigned short speed,
* RETURNS:
* 0 on success, negative errno on failure
*/
-int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev,
- int force_pio0)
+int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0)
{
unsigned long xfer_mask;
int highbit;
@@ -1956,8 +1979,8 @@ int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev,
ata_unpack_xfermask(xfer_mask, &dev->pio_mask, &dev->mwdma_mask,
&dev->udma_mask);
- printk(KERN_WARNING "ata%u: dev %u limiting speed to %s\n",
- ap->id, dev->devno, ata_mode_string(xfer_mask));
+ ata_dev_printk(dev, KERN_WARNING, "limiting speed to %s\n",
+ ata_mode_string(xfer_mask));
return 0;
@@ -1965,7 +1988,7 @@ int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev,
return -EINVAL;
}
-static int ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev)
+static int ata_dev_set_mode(struct ata_device *dev)
{
unsigned int err_mask;
int rc;
@@ -1974,24 +1997,22 @@ static int ata_dev_set_mode(struct ata_port *ap, struct ata_device *dev)
if (dev->xfer_shift == ATA_SHIFT_PIO)
dev->flags |= ATA_DFLAG_PIO;
- err_mask = ata_dev_set_xfermode(ap, dev);
+ err_mask = ata_dev_set_xfermode(dev);
if (err_mask) {
- printk(KERN_ERR
- "ata%u: failed to set xfermode (err_mask=0x%x)\n",
- ap->id, err_mask);
+ ata_dev_printk(dev, KERN_ERR, "failed to set xfermode "
+ "(err_mask=0x%x)\n", err_mask);
return -EIO;
}
- rc = ata_dev_revalidate(ap, dev, 0);
+ rc = ata_dev_revalidate(dev, 0);
if (rc)
return rc;
DPRINTK("xfer_shift=%u, xfer_mode=0x%x\n",
dev->xfer_shift, (int)dev->xfer_mode);
- printk(KERN_INFO "ata%u: dev %u configured for %s\n",
- ap->id, dev->devno,
- ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode)));
+ ata_dev_printk(dev, KERN_INFO, "configured for %s\n",
+ ata_mode_string(ata_xfer_mode2mask(dev->xfer_mode)));
return 0;
}
@@ -2015,6 +2036,20 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
struct ata_device *dev;
int i, rc = 0, used_dma = 0, found = 0;
+ /* has private set_mode? */
+ if (ap->ops->set_mode) {
+ /* FIXME: make ->set_mode handle no device case and
+ * return error code and failing device on failure.
+ */
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ if (ata_dev_enabled(&ap->device[i])) {
+ ap->ops->set_mode(ap);
+ break;
+ }
+ }
+ return 0;
+ }
+
/* step 1: calculate xfer_mask */
for (i = 0; i < ATA_MAX_DEVICES; i++) {
unsigned int pio_mask, dma_mask;
@@ -2024,7 +2059,7 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
if (!ata_dev_enabled(dev))
continue;
- ata_dev_xfermask(ap, dev);
+ ata_dev_xfermask(dev);
pio_mask = ata_pack_xfermask(dev->pio_mask, 0, 0);
dma_mask = ata_pack_xfermask(0, dev->mwdma_mask, dev->udma_mask);
@@ -2045,8 +2080,7 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
continue;
if (!dev->pio_mode) {
- printk(KERN_WARNING "ata%u: dev %u no PIO support\n",
- ap->id, dev->devno);
+ ata_dev_printk(dev, KERN_WARNING, "no PIO support\n");
rc = -EINVAL;
goto out;
}
@@ -2077,7 +2111,7 @@ int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev)
if (!ata_dev_enabled(dev))
continue;
- rc = ata_dev_set_mode(ap, dev);
+ rc = ata_dev_set_mode(dev);
if (rc)
goto out;
}
@@ -2145,8 +2179,8 @@ unsigned int ata_busy_sleep (struct ata_port *ap,
}
if (status & ATA_BUSY)
- printk(KERN_WARNING "ata%u is slow to respond, "
- "please be patient\n", ap->id);
+ ata_port_printk(ap, KERN_WARNING,
+ "port is slow to respond, please be patient\n");
timeout = timer_start + tmout;
while ((status & ATA_BUSY) && (time_before(jiffies, timeout))) {
@@ -2155,8 +2189,8 @@ unsigned int ata_busy_sleep (struct ata_port *ap,
}
if (status & ATA_BUSY) {
- printk(KERN_ERR "ata%u failed to respond (%lu secs)\n",
- ap->id, tmout / HZ);
+ ata_port_printk(ap, KERN_ERR, "port failed to respond "
+ "(%lu secs)\n", tmout / HZ);
return 1;
}
@@ -2249,7 +2283,7 @@ static unsigned int ata_bus_softreset(struct ata_port *ap,
* pulldown resistor.
*/
if (ata_check_status(ap) == 0xFF) {
- printk(KERN_ERR "ata%u: SRST failed (status 0xFF)\n", ap->id);
+ ata_port_printk(ap, KERN_ERR, "SRST failed (status 0xFF)\n");
return AC_ERR_OTHER;
}
@@ -2343,7 +2377,7 @@ void ata_bus_reset(struct ata_port *ap)
return;
err_out:
- printk(KERN_ERR "ata%u: disabling port\n", ap->id);
+ ata_port_printk(ap, KERN_ERR, "disabling port\n");
ap->ops->port_disable(ap);
DPRINTK("EXIT\n");
@@ -2353,20 +2387,26 @@ static int sata_phy_resume(struct ata_port *ap)
{
unsigned long timeout = jiffies + (HZ * 5);
u32 scontrol, sstatus;
+ int rc;
+
+ if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol)))
+ return rc;
- scontrol = scr_read(ap, SCR_CONTROL);
scontrol = (scontrol & 0x0f0) | 0x300;
- scr_write_flush(ap, SCR_CONTROL, scontrol);
+
+ if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol)))
+ return rc;
/* Wait for phy to become ready, if necessary. */
do {
msleep(200);
- sstatus = scr_read(ap, SCR_STATUS);
+ if ((rc = sata_scr_read(ap, SCR_STATUS, &sstatus)))
+ return rc;
if ((sstatus & 0xf) != 1)
return 0;
} while (time_before(jiffies, timeout));
- return -1;
+ return -EBUSY;
}
/**
@@ -2384,22 +2424,20 @@ static int sata_phy_resume(struct ata_port *ap)
*/
void ata_std_probeinit(struct ata_port *ap)
{
- if ((ap->flags & ATA_FLAG_SATA) && ap->ops->scr_read) {
- u32 spd;
-
- /* set cable type and resume link */
- ap->cbl = ATA_CBL_SATA;
- sata_phy_resume(ap);
+ u32 scontrol;
- /* init sata_spd_limit to the current value */
- spd = (scr_read(ap, SCR_CONTROL) & 0xf0) >> 4;
- if (spd)
- ap->sata_spd_limit &= (1 << spd) - 1;
+ /* resume link */
+ sata_phy_resume(ap);
- /* wait for device */
- if (sata_dev_present(ap))
- ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
+ /* init sata_spd_limit to the current value */
+ if (sata_scr_read(ap, SCR_CONTROL, &scontrol) == 0) {
+ int spd = (scontrol >> 4) & 0xf;
+ ap->sata_spd_limit &= (1 << spd) - 1;
}
+
+ /* wait for device */
+ if (ata_port_online(ap))
+ ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT);
}
/**
@@ -2424,7 +2462,7 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes)
DPRINTK("ENTER\n");
- if (ap->ops->scr_read && !sata_dev_present(ap)) {
+ if (ata_port_offline(ap)) {
classes[0] = ATA_DEV_NONE;
goto out;
}
@@ -2442,8 +2480,8 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes)
DPRINTK("about to softreset, devmask=%x\n", devmask);
err_mask = ata_bus_softreset(ap, devmask);
if (err_mask) {
- printk(KERN_ERR "ata%u: SRST failed (err_mask=0x%x)\n",
- ap->id, err_mask);
+ ata_port_printk(ap, KERN_ERR, "SRST failed (err_mask=0x%x)\n",
+ err_mask);
return -EIO;
}
@@ -2475,26 +2513,35 @@ int ata_std_softreset(struct ata_port *ap, unsigned int *classes)
int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
{
u32 scontrol;
+ int rc;
DPRINTK("ENTER\n");
- if (ata_set_sata_spd_needed(ap)) {
+ if (sata_set_spd_needed(ap)) {
/* SATA spec says nothing about how to reconfigure
* spd. To be on the safe side, turn off phy during
* reconfiguration. This works for at least ICH7 AHCI
* and Sil3124.
*/
- scontrol = scr_read(ap, SCR_CONTROL);
+ if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol)))
+ return rc;
+
scontrol = (scontrol & 0x0f0) | 0x302;
- scr_write_flush(ap, SCR_CONTROL, scontrol);
- ata_set_sata_spd(ap);
+ if ((rc = sata_scr_write(ap, SCR_CONTROL, scontrol)))
+ return rc;
+
+ sata_set_spd(ap);
}
/* issue phy wake/reset */
- scontrol = scr_read(ap, SCR_CONTROL);
+ if ((rc = sata_scr_read(ap, SCR_CONTROL, &scontrol)))
+ return rc;
+
scontrol = (scontrol & 0x0f0) | 0x301;
- scr_write_flush(ap, SCR_CONTROL, scontrol);
+
+ if ((rc = sata_scr_write_flush(ap, SCR_CONTROL, scontrol)))
+ return rc;
/* Couldn't find anything in SATA I/II specs, but AHCI-1.1
* 10.4.2 says at least 1 ms.
@@ -2505,15 +2552,15 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
sata_phy_resume(ap);
/* TODO: phy layer with polling, timeouts, etc. */
- if (!sata_dev_present(ap)) {
+ if (ata_port_offline(ap)) {
*class = ATA_DEV_NONE;
DPRINTK("EXIT, link offline\n");
return 0;
}
if (ata_busy_sleep(ap, ATA_TMOUT_BOOT_QUICK, ATA_TMOUT_BOOT)) {
- printk(KERN_ERR
- "ata%u: COMRESET failed (device not ready)\n", ap->id);
+ ata_port_printk(ap, KERN_ERR,
+ "COMRESET failed (device not ready)\n");
return -EIO;
}
@@ -2542,15 +2589,23 @@ int sata_std_hardreset(struct ata_port *ap, unsigned int *class)
*/
void ata_std_postreset(struct ata_port *ap, unsigned int *classes)
{
+ u32 serror;
+
DPRINTK("ENTER\n");
/* print link status */
- if (ap->cbl == ATA_CBL_SATA)
- sata_print_link_status(ap);
+ sata_print_link_status(ap);
+
+ /* clear SError */
+ if (sata_scr_read(ap, SCR_ERROR, &serror) == 0)
+ sata_scr_write(ap, SCR_ERROR, serror);
/* re-enable interrupts */
- if (ap->ioaddr.ctl_addr) /* FIXME: hack. create a hook instead */
- ata_irq_on(ap);
+ if (!ap->ops->error_handler) {
+ /* FIXME: hack. create a hook instead */
+ if (ap->ioaddr.ctl_addr)
+ ata_irq_on(ap);
+ }
/* is double-select really necessary? */
if (classes[0] != ATA_DEV_NONE)
@@ -2593,7 +2648,7 @@ int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes)
ata_reset_fn_t hardreset;
hardreset = NULL;
- if (ap->cbl == ATA_CBL_SATA && ap->ops->scr_read)
+ if (sata_scr_valid(ap))
hardreset = sata_std_hardreset;
return ata_drive_probe_reset(ap, ata_std_probeinit,
@@ -2602,7 +2657,7 @@ int ata_std_probe_reset(struct ata_port *ap, unsigned int *classes)
}
int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset,
- ata_postreset_fn_t postreset, unsigned int *classes)
+ unsigned int *classes)
{
int i, rc;
@@ -2626,9 +2681,6 @@ int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset,
if (classes[i] == ATA_DEV_UNKNOWN)
classes[i] = ATA_DEV_NONE;
- if (postreset)
- postreset(ap, classes);
-
return 0;
}
@@ -2668,15 +2720,17 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit,
{
int rc = -EINVAL;
+ ata_eh_freeze_port(ap);
+
if (probeinit)
probeinit(ap);
- if (softreset && !ata_set_sata_spd_needed(ap)) {
- rc = ata_do_reset(ap, softreset, postreset, classes);
+ if (softreset && !sata_set_spd_needed(ap)) {
+ rc = ata_do_reset(ap, softreset, classes);
if (rc == 0 && classes[0] != ATA_DEV_UNKNOWN)
goto done;
- printk(KERN_INFO "ata%u: softreset failed, will try "
- "hardreset in 5 secs\n", ap->id);
+ ata_port_printk(ap, KERN_INFO, "softreset failed, "
+ "will try hardreset in 5 secs\n");
ssleep(5);
}
@@ -2684,39 +2738,45 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit,
goto done;
while (1) {
- rc = ata_do_reset(ap, hardreset, postreset, classes);
+ rc = ata_do_reset(ap, hardreset, classes);
if (rc == 0) {
if (classes[0] != ATA_DEV_UNKNOWN)
goto done;
break;
}
- if (ata_down_sata_spd_limit(ap))
+ if (sata_down_spd_limit(ap))
goto done;
- printk(KERN_INFO "ata%u: hardreset failed, will retry "
- "in 5 secs\n", ap->id);
+ ata_port_printk(ap, KERN_INFO, "hardreset failed, "
+ "will retry in 5 secs\n");
ssleep(5);
}
if (softreset) {
- printk(KERN_INFO "ata%u: hardreset succeeded without "
- "classification, will retry softreset in 5 secs\n",
- ap->id);
+ ata_port_printk(ap, KERN_INFO,
+ "hardreset succeeded without classification, "
+ "will retry softreset in 5 secs\n");
ssleep(5);
- rc = ata_do_reset(ap, softreset, postreset, classes);
+ rc = ata_do_reset(ap, softreset, classes);
}
done:
- if (rc == 0 && classes[0] == ATA_DEV_UNKNOWN)
- rc = -ENODEV;
+ if (rc == 0) {
+ if (postreset)
+ postreset(ap, classes);
+
+ ata_eh_thaw_port(ap);
+
+ if (classes[0] == ATA_DEV_UNKNOWN)
+ rc = -ENODEV;
+ }
return rc;
}
/**
* ata_dev_same_device - Determine whether new ID matches configured device
- * @ap: port on which the device to compare against resides
* @dev: device to compare against
* @new_class: class of the new device
* @new_id: IDENTIFY page of the new device
@@ -2731,17 +2791,16 @@ int ata_drive_probe_reset(struct ata_port *ap, ata_probeinit_fn_t probeinit,
* RETURNS:
* 1 if @dev matches @new_class and @new_id, 0 otherwise.
*/
-static int ata_dev_same_device(struct ata_port *ap, struct ata_device *dev,
- unsigned int new_class, const u16 *new_id)
+static int ata_dev_same_device(struct ata_device *dev, unsigned int new_class,
+ const u16 *new_id)
{
const u16 *old_id = dev->id;
unsigned char model[2][41], serial[2][21];
u64 new_n_sectors;
if (dev->class != new_class) {
- printk(KERN_INFO
- "ata%u: dev %u class mismatch %d != %d\n",
- ap->id, dev->devno, dev->class, new_class);
+ ata_dev_printk(dev, KERN_INFO, "class mismatch %d != %d\n",
+ dev->class, new_class);
return 0;
}
@@ -2752,24 +2811,22 @@ static int ata_dev_same_device(struct ata_port *ap, struct ata_device *dev,
new_n_sectors = ata_id_n_sectors(new_id);
if (strcmp(model[0], model[1])) {
- printk(KERN_INFO
- "ata%u: dev %u model number mismatch '%s' != '%s'\n",
- ap->id, dev->devno, model[0], model[1]);
+ ata_dev_printk(dev, KERN_INFO, "model number mismatch "
+ "'%s' != '%s'\n", model[0], model[1]);
return 0;
}
if (strcmp(serial[0], serial[1])) {
- printk(KERN_INFO
- "ata%u: dev %u serial number mismatch '%s' != '%s'\n",
- ap->id, dev->devno, serial[0], serial[1]);
+ ata_dev_printk(dev, KERN_INFO, "serial number mismatch "
+ "'%s' != '%s'\n", serial[0], serial[1]);
return 0;
}
if (dev->class == ATA_DEV_ATA && dev->n_sectors != new_n_sectors) {
- printk(KERN_INFO
- "ata%u: dev %u n_sectors mismatch %llu != %llu\n",
- ap->id, dev->devno, (unsigned long long)dev->n_sectors,
- (unsigned long long)new_n_sectors);
+ ata_dev_printk(dev, KERN_INFO, "n_sectors mismatch "
+ "%llu != %llu\n",
+ (unsigned long long)dev->n_sectors,
+ (unsigned long long)new_n_sectors);
return 0;
}
@@ -2778,7 +2835,6 @@ static int ata_dev_same_device(struct ata_port *ap, struct ata_device *dev,
/**
* ata_dev_revalidate - Revalidate ATA device
- * @ap: port on which the device to revalidate resides
* @dev: device to revalidate
* @post_reset: is this revalidation after reset?
*
@@ -2791,11 +2847,10 @@ static int ata_dev_same_device(struct ata_port *ap, struct ata_device *dev,
* RETURNS:
* 0 on success, negative errno otherwise
*/
-int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev,
- int post_reset)
+int ata_dev_revalidate(struct ata_device *dev, int post_reset)
{
unsigned int class = dev->class;
- u16 *id = NULL;
+ u16 *id = (void *)dev->ap->sector_buf;
int rc;
if (!ata_dev_enabled(dev)) {
@@ -2803,29 +2858,26 @@ int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev,
goto fail;
}
- /* allocate & read ID data */
- rc = ata_dev_read_id(ap, dev, &class, post_reset, &id);
+ /* read ID data */
+ rc = ata_dev_read_id(dev, &class, post_reset, id);
if (rc)
goto fail;
/* is the device still there? */
- if (!ata_dev_same_device(ap, dev, class, id)) {
+ if (!ata_dev_same_device(dev, class, id)) {
rc = -ENODEV;
goto fail;
}
- kfree(dev->id);
- dev->id = id;
+ memcpy(dev->id, id, sizeof(id[0]) * ATA_ID_WORDS);
/* configure device according to the new ID */
- rc = ata_dev_configure(ap, dev, 0);
+ rc = ata_dev_configure(dev, 0);
if (rc == 0)
return 0;
fail:
- printk(KERN_ERR "ata%u: dev %u revalidation failed (errno=%d)\n",
- ap->id, dev->devno, rc);
- kfree(id);
+ ata_dev_printk(dev, KERN_ERR, "revalidation failed (errno=%d)\n", rc);
return rc;
}
@@ -2901,7 +2953,6 @@ static int ata_dma_blacklisted(const struct ata_device *dev)
/**
* ata_dev_xfermask - Compute supported xfermask of the given device
- * @ap: Port on which the device to compute xfermask for resides
* @dev: Device to compute xfermask for
*
* Compute supported xfermask of @dev and store it in
@@ -2916,8 +2967,9 @@ static int ata_dma_blacklisted(const struct ata_device *dev)
* LOCKING:
* None.
*/
-static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev)
+static void ata_dev_xfermask(struct ata_device *dev)
{
+ struct ata_port *ap = dev->ap;
struct ata_host_set *hs = ap->host_set;
unsigned long xfer_mask;
int i;
@@ -2953,8 +3005,8 @@ static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev)
}
if (ata_dma_blacklisted(dev))
- printk(KERN_WARNING "ata%u: dev %u is on DMA blacklist, "
- "disabling DMA\n", ap->id, dev->devno);
+ ata_dev_printk(dev, KERN_WARNING,
+ "device is on DMA blacklist, disabling DMA\n");
if (hs->flags & ATA_HOST_SIMPLEX) {
if (hs->simplex_claimed)
@@ -2970,7 +3022,6 @@ static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev)
/**
* ata_dev_set_xfermode - Issue SET FEATURES - XFER MODE command
- * @ap: Port associated with device @dev
* @dev: Device to which command will be sent
*
* Issue SET FEATURES - XFER MODE command to device @dev
@@ -2983,8 +3034,7 @@ static void ata_dev_xfermask(struct ata_port *ap, struct ata_device *dev)
* 0 on success, AC_ERR_* mask otherwise.
*/
-static unsigned int ata_dev_set_xfermode(struct ata_port *ap,
- struct ata_device *dev)
+static unsigned int ata_dev_set_xfermode(struct ata_device *dev)
{
struct ata_taskfile tf;
unsigned int err_mask;
@@ -2992,14 +3042,14 @@ static unsigned int ata_dev_set_xfermode(struct ata_port *ap,
/* set up set-features taskfile */
DPRINTK("set features - xfer mode\n");
- ata_tf_init(ap, &tf, dev->devno);
+ ata_tf_init(dev, &tf);
tf.command = ATA_CMD_SET_FEATURES;
tf.feature = SETFEATURES_XFER;
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf.protocol = ATA_PROT_NODATA;
tf.nsect = dev->xfer_mode;
- err_mask = ata_exec_internal(ap, dev, &tf, NULL, DMA_NONE, NULL, 0);
+ err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
DPRINTK("EXIT, err_mask=%x\n", err_mask);
return err_mask;
@@ -3007,8 +3057,9 @@ static unsigned int ata_dev_set_xfermode(struct ata_port *ap,
/**
* ata_dev_init_params - Issue INIT DEV PARAMS command
- * @ap: Port associated with device @dev
* @dev: Device to which command will be sent
+ * @heads: Number of heads
+ * @sectors: Number of sectors
*
* LOCKING:
* Kernel thread context (may sleep)
@@ -3016,11 +3067,8 @@ static unsigned int ata_dev_set_xfermode(struct ata_port *ap,
* RETURNS:
* 0 on success, AC_ERR_* mask otherwise.
*/
-
-static unsigned int ata_dev_init_params(struct ata_port *ap,
- struct ata_device *dev,
- u16 heads,
- u16 sectors)
+static unsigned int ata_dev_init_params(struct ata_device *dev,
+ u16 heads, u16 sectors)
{
struct ata_taskfile tf;
unsigned int err_mask;
@@ -3032,14 +3080,14 @@ static unsigned int ata_dev_init_params(struct ata_port *ap,
/* set up init dev params taskfile */
DPRINTK("init dev params \n");
- ata_tf_init(ap, &tf, dev->devno);
+ ata_tf_init(dev, &tf);
tf.command = ATA_CMD_INIT_DEV_PARAMS;
tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
tf.protocol = ATA_PROT_NODATA;
tf.nsect = sectors;
tf.device |= (heads - 1) & 0x0f; /* max head = num. of heads - 1 */
- err_mask = ata_exec_internal(ap, dev, &tf, NULL, DMA_NONE, NULL, 0);
+ err_mask = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
DPRINTK("EXIT, err_mask=%x\n", err_mask);
return err_mask;
@@ -3421,15 +3469,29 @@ skip_map:
* LOCKING:
* None. (grabs host lock)
*/
-
void ata_poll_qc_complete(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
unsigned long flags;
spin_lock_irqsave(&ap->host_set->lock, flags);
- ata_irq_on(ap);
- ata_qc_complete(qc);
+
+ if (ap->ops->error_handler) {
+ /* EH might have kicked in while host_set lock is released */
+ qc = ata_qc_from_tag(ap, qc->tag);
+ if (qc) {
+ if (!(qc->err_mask & AC_ERR_HSM)) {
+ ata_irq_on(ap);
+ ata_qc_complete(qc);
+ } else
+ ata_port_freeze(ap);
+ }
+ } else {
+ /* old EH */
+ ata_irq_on(ap);
+ ata_qc_complete(qc);
+ }
+
spin_unlock_irqrestore(&ap->host_set->lock, flags);
}
@@ -3728,8 +3790,8 @@ next_sg:
unsigned int i;
if (words) /* warning if bytes > 1 */
- printk(KERN_WARNING "ata%u: %u bytes trailing data\n",
- ap->id, bytes);
+ ata_dev_printk(qc->dev, KERN_WARNING,
+ "%u bytes trailing data\n", bytes);
for (i = 0; i < words; i++)
ata_data_xfer(ap, (unsigned char*)pad_buf, 2, do_write);
@@ -3823,8 +3885,7 @@ static void atapi_pio_bytes(struct ata_queued_cmd *qc)
return;
err_out:
- printk(KERN_INFO "ata%u: dev %u: ATAPI check failed\n",
- ap->id, dev->devno);
+ ata_dev_printk(dev, KERN_INFO, "ATAPI check failed\n");
qc->err_mask |= AC_ERR_HSM;
ap->hsm_task_state = HSM_ST_ERR;
}
@@ -4134,9 +4195,14 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
struct ata_queued_cmd *qc = NULL;
unsigned int i;
- for (i = 0; i < ATA_MAX_QUEUE; i++)
+ /* no command while frozen */
+ if (unlikely(ap->flags & ATA_FLAG_FROZEN))
+ return NULL;
+
+ /* the last tag is reserved for internal command. */
+ for (i = 0; i < ATA_MAX_QUEUE - 1; i++)
if (!test_and_set_bit(i, &ap->qactive)) {
- qc = ata_qc_from_tag(ap, i);
+ qc = __ata_qc_from_tag(ap, i);
break;
}
@@ -4148,16 +4214,15 @@ static struct ata_queued_cmd *ata_qc_new(struct ata_port *ap)
/**
* ata_qc_new_init - Request an available ATA command, and initialize it
- * @ap: Port associated with device @dev
* @dev: Device from whom we request an available command structure
*
* LOCKING:
* None.
*/
-struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
- struct ata_device *dev)
+struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev)
{
+ struct ata_port *ap = dev->ap;
struct ata_queued_cmd *qc;
qc = ata_qc_new(ap);
@@ -4192,8 +4257,6 @@ void ata_qc_free(struct ata_queued_cmd *qc)
qc->flags = 0;
tag = qc->tag;
if (likely(ata_tag_valid(tag))) {
- if (tag == ap->active_tag)
- ap->active_tag = ATA_TAG_POISON;
qc->tag = ATA_TAG_POISON;
clear_bit(tag, &ap->qactive);
}
@@ -4207,6 +4270,9 @@ void __ata_qc_complete(struct ata_queued_cmd *qc)
if (likely(qc->flags & ATA_QCFLAG_DMAMAP))
ata_sg_clean(qc);
+ /* command should be marked inactive atomically with qc completion */
+ qc->ap->active_tag = ATA_TAG_POISON;
+
/* atapi: mark qc as inactive to prevent the interrupt handler
* from completing the command twice later, before the error handler
* is called. (when rc != 0 and atapi request sense is needed)
@@ -4217,6 +4283,66 @@ void __ata_qc_complete(struct ata_queued_cmd *qc)
qc->complete_fn(qc);
}
+/**
+ * ata_qc_complete - Complete an active ATA command
+ * @qc: Command to complete
+ * @err_mask: ATA Status register contents
+ *
+ * Indicate to the mid and upper layers that an ATA
+ * command has completed, with either an ok or not-ok status.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+void ata_qc_complete(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ /* XXX: New EH and old EH use different mechanisms to
+ * synchronize EH with regular execution path.
+ *
+ * In new EH, a failed qc is marked with ATA_QCFLAG_FAILED.
+ * Normal execution path is responsible for not accessing a
+ * failed qc. libata core enforces the rule by returning NULL
+ * from ata_qc_from_tag() for failed qcs.
+ *
+ * Old EH depends on ata_qc_complete() nullifying completion
+ * requests if ATA_QCFLAG_EH_SCHEDULED is set. Old EH does
+ * not synchronize with interrupt handler. Only PIO task is
+ * taken care of.
+ */
+ if (ap->ops->error_handler) {
+ WARN_ON(ap->flags & ATA_FLAG_FROZEN);
+
+ if (unlikely(qc->err_mask))
+ qc->flags |= ATA_QCFLAG_FAILED;
+
+ if (unlikely(qc->flags & ATA_QCFLAG_FAILED)) {
+ if (!ata_tag_internal(qc->tag)) {
+ /* always fill result TF for failed qc */
+ ap->ops->tf_read(ap, &qc->result_tf);
+ ata_qc_schedule_eh(qc);
+ return;
+ }
+ }
+
+ /* read result TF if requested */
+ if (qc->flags & ATA_QCFLAG_RESULT_TF)
+ ap->ops->tf_read(ap, &qc->result_tf);
+
+ __ata_qc_complete(qc);
+ } else {
+ if (qc->flags & ATA_QCFLAG_EH_SCHEDULED)
+ return;
+
+ /* read result TF if failed or requested */
+ if (qc->err_mask || qc->flags & ATA_QCFLAG_RESULT_TF)
+ ap->ops->tf_read(ap, &qc->result_tf);
+
+ __ata_qc_complete(qc);
+ }
+}
+
static inline int ata_should_dma_map(struct ata_queued_cmd *qc)
{
struct ata_port *ap = qc->ap;
@@ -4503,7 +4629,7 @@ idle_irq:
#ifdef ATA_IRQ_TRAP
if ((ap->stats.idle_irq % 1000) == 0) {
ata_irq_ack(ap, 0); /* debug trap */
- printk(KERN_WARNING "ata%d: irq trap\n", ap->id);
+ ata_port_printk(ap, KERN_WARNING, "irq trap\n");
return 1;
}
#endif
@@ -4556,32 +4682,168 @@ irqreturn_t ata_interrupt (int irq, void *dev_instance, struct pt_regs *regs)
return IRQ_RETVAL(handled);
}
+/**
+ * sata_scr_valid - test whether SCRs are accessible
+ * @ap: ATA port to test SCR accessibility for
+ *
+ * Test whether SCRs are accessible for @ap.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 1 if SCRs are accessible, 0 otherwise.
+ */
+int sata_scr_valid(struct ata_port *ap)
+{
+ return ap->cbl == ATA_CBL_SATA && ap->ops->scr_read;
+}
+
+/**
+ * sata_scr_read - read SCR register of the specified port
+ * @ap: ATA port to read SCR for
+ * @reg: SCR to read
+ * @val: Place to store read value
+ *
+ * Read SCR register @reg of @ap into *@val. This function is
+ * guaranteed to succeed if the cable type of the port is SATA
+ * and the port implements ->scr_read.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 0 on success, negative errno on failure.
+ */
+int sata_scr_read(struct ata_port *ap, int reg, u32 *val)
+{
+ if (sata_scr_valid(ap)) {
+ *val = ap->ops->scr_read(ap, reg);
+ return 0;
+ }
+ return -EOPNOTSUPP;
+}
+
+/**
+ * sata_scr_write - write SCR register of the specified port
+ * @ap: ATA port to write SCR for
+ * @reg: SCR to write
+ * @val: value to write
+ *
+ * Write @val to SCR register @reg of @ap. This function is
+ * guaranteed to succeed if the cable type of the port is SATA
+ * and the port implements ->scr_read.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 0 on success, negative errno on failure.
+ */
+int sata_scr_write(struct ata_port *ap, int reg, u32 val)
+{
+ if (sata_scr_valid(ap)) {
+ ap->ops->scr_write(ap, reg, val);
+ return 0;
+ }
+ return -EOPNOTSUPP;
+}
+
+/**
+ * sata_scr_write_flush - write SCR register of the specified port and flush
+ * @ap: ATA port to write SCR for
+ * @reg: SCR to write
+ * @val: value to write
+ *
+ * This function is identical to sata_scr_write() except that this
+ * function performs flush after writing to the register.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 0 on success, negative errno on failure.
+ */
+int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val)
+{
+ if (sata_scr_valid(ap)) {
+ ap->ops->scr_write(ap, reg, val);
+ ap->ops->scr_read(ap, reg);
+ return 0;
+ }
+ return -EOPNOTSUPP;
+}
+
+/**
+ * ata_port_online - test whether the given port is online
+ * @ap: ATA port to test
+ *
+ * Test whether @ap is online. Note that this function returns 0
+ * if online status of @ap cannot be obtained, so
+ * ata_port_online(ap) != !ata_port_offline(ap).
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 1 if the port online status is available and online.
+ */
+int ata_port_online(struct ata_port *ap)
+{
+ u32 sstatus;
+
+ if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) == 0x3)
+ return 1;
+ return 0;
+}
+
+/**
+ * ata_port_offline - test whether the given port is offline
+ * @ap: ATA port to test
+ *
+ * Test whether @ap is offline. Note that this function returns
+ * 0 if offline status of @ap cannot be obtained, so
+ * ata_port_online(ap) != !ata_port_offline(ap).
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * 1 if the port offline status is available and offline.
+ */
+int ata_port_offline(struct ata_port *ap)
+{
+ u32 sstatus;
+
+ if (!sata_scr_read(ap, SCR_STATUS, &sstatus) && (sstatus & 0xf) != 0x3)
+ return 1;
+ return 0;
+}
/*
* Execute a 'simple' command, that only consists of the opcode 'cmd' itself,
* without filling any other registers
*/
-static int ata_do_simple_cmd(struct ata_port *ap, struct ata_device *dev,
- u8 cmd)
+static int ata_do_simple_cmd(struct ata_device *dev, u8 cmd)
{
struct ata_taskfile tf;
int err;
- ata_tf_init(ap, &tf, dev->devno);
+ ata_tf_init(dev, &tf);
tf.command = cmd;
tf.flags |= ATA_TFLAG_DEVICE;
tf.protocol = ATA_PROT_NODATA;
- err = ata_exec_internal(ap, dev, &tf, NULL, DMA_NONE, NULL, 0);
+ err = ata_exec_internal(dev, &tf, NULL, DMA_NONE, NULL, 0);
if (err)
- printk(KERN_ERR "%s: ata command failed: %d\n",
- __FUNCTION__, err);
+ ata_dev_printk(dev, KERN_ERR, "%s: ata command failed: %d\n",
+ __FUNCTION__, err);
return err;
}
-static int ata_flush_cache(struct ata_port *ap, struct ata_device *dev)
+static int ata_flush_cache(struct ata_device *dev)
{
u8 cmd;
@@ -4593,22 +4855,21 @@ static int ata_flush_cache(struct ata_port *ap, struct ata_device *dev)
else
cmd = ATA_CMD_FLUSH;
- return ata_do_simple_cmd(ap, dev, cmd);
+ return ata_do_simple_cmd(dev, cmd);
}
-static int ata_standby_drive(struct ata_port *ap, struct ata_device *dev)
+static int ata_standby_drive(struct ata_device *dev)
{
- return ata_do_simple_cmd(ap, dev, ATA_CMD_STANDBYNOW1);
+ return ata_do_simple_cmd(dev, ATA_CMD_STANDBYNOW1);
}
-static int ata_start_drive(struct ata_port *ap, struct ata_device *dev)
+static int ata_start_drive(struct ata_device *dev)
{
- return ata_do_simple_cmd(ap, dev, ATA_CMD_IDLEIMMEDIATE);
+ return ata_do_simple_cmd(dev, ATA_CMD_IDLEIMMEDIATE);
}
/**
* ata_device_resume - wakeup a previously suspended devices
- * @ap: port the device is connected to
* @dev: the device to resume
*
* Kick the drive back into action, by sending it an idle immediate
@@ -4616,39 +4877,42 @@ static int ata_start_drive(struct ata_port *ap, struct ata_device *dev)
* and host.
*
*/
-int ata_device_resume(struct ata_port *ap, struct ata_device *dev)
+int ata_device_resume(struct ata_device *dev)
{
+ struct ata_port *ap = dev->ap;
+
if (ap->flags & ATA_FLAG_SUSPENDED) {
struct ata_device *failed_dev;
ap->flags &= ~ATA_FLAG_SUSPENDED;
while (ata_set_mode(ap, &failed_dev))
- ata_dev_disable(ap, failed_dev);
+ ata_dev_disable(failed_dev);
}
if (!ata_dev_enabled(dev))
return 0;
if (dev->class == ATA_DEV_ATA)
- ata_start_drive(ap, dev);
+ ata_start_drive(dev);
return 0;
}
/**
* ata_device_suspend - prepare a device for suspend
- * @ap: port the device is connected to
* @dev: the device to suspend
*
* Flush the cache on the drive, if appropriate, then issue a
* standbynow command.
*/
-int ata_device_suspend(struct ata_port *ap, struct ata_device *dev, pm_message_t state)
+int ata_device_suspend(struct ata_device *dev, pm_message_t state)
{
+ struct ata_port *ap = dev->ap;
+
if (!ata_dev_enabled(dev))
return 0;
if (dev->class == ATA_DEV_ATA)
- ata_flush_cache(ap, dev);
+ ata_flush_cache(dev);
if (state.event != PM_EVENT_FREEZE)
- ata_standby_drive(ap, dev);
+ ata_standby_drive(dev);
ap->flags |= ATA_FLAG_SUSPENDED;
return 0;
}
@@ -4776,7 +5040,6 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
ap->udma_mask = ent->udma_mask;
ap->flags |= ent->host_flags;
ap->ops = ent->port_ops;
- ap->cbl = ATA_CBL_NONE;
ap->sata_spd_limit = UINT_MAX;
ap->active_tag = ATA_TAG_POISON;
ap->last_ctl = 0xFF;
@@ -4784,8 +5047,14 @@ static void ata_host_init(struct ata_port *ap, struct Scsi_Host *host,
INIT_WORK(&ap->port_task, NULL, NULL);
INIT_LIST_HEAD(&ap->eh_done_q);
+ /* set cable type */
+ ap->cbl = ATA_CBL_NONE;
+ if (ap->flags & ATA_FLAG_SATA)
+ ap->cbl = ATA_CBL_SATA;
+
for (i = 0; i < ATA_MAX_DEVICES; i++) {
struct ata_device *dev = &ap->device[i];
+ dev->ap = ap;
dev->devno = i;
dev->pio_mask = UINT_MAX;
dev->mwdma_mask = UINT_MAX;
@@ -4909,18 +5178,18 @@ int ata_device_add(const struct ata_probe_ent *ent)
(ap->pio_mask << ATA_SHIFT_PIO);
/* print per-port info to dmesg */
- printk(KERN_INFO "ata%u: %cATA max %s cmd 0x%lX ctl 0x%lX "
- "bmdma 0x%lX irq %lu\n",
- ap->id,
- ap->flags & ATA_FLAG_SATA ? 'S' : 'P',
- ata_mode_string(xfer_mode_mask),
- ap->ioaddr.cmd_addr,
- ap->ioaddr.ctl_addr,
- ap->ioaddr.bmdma_addr,
- ent->irq);
+ ata_port_printk(ap, KERN_INFO, "%cATA max %s cmd 0x%lX "
+ "ctl 0x%lX bmdma 0x%lX irq %lu\n",
+ ap->flags & ATA_FLAG_SATA ? 'S' : 'P',
+ ata_mode_string(xfer_mode_mask),
+ ap->ioaddr.cmd_addr,
+ ap->ioaddr.ctl_addr,
+ ap->ioaddr.bmdma_addr,
+ ent->irq);
ata_chk_status(ap);
host_set->ops->irq_clear(ap);
+ ata_eh_freeze_port(ap); /* freeze port before requesting IRQ */
count++;
}
@@ -4955,8 +5224,7 @@ int ata_device_add(const struct ata_probe_ent *ent)
rc = scsi_add_host(ap->host, dev);
if (rc) {
- printk(KERN_ERR "ata%u: scsi_add_host failed\n",
- ap->id);
+ ata_port_printk(ap, KERN_ERR, "scsi_add_host failed\n");
/* FIXME: do something useful here */
/* FIXME: handle unconditional calls to
* scsi_scan_host and ata_host_remove, below,
@@ -5052,14 +5320,11 @@ void ata_host_set_remove(struct ata_host_set *host_set)
int ata_scsi_release(struct Scsi_Host *host)
{
struct ata_port *ap = ata_shost_to_port(host);
- int i;
DPRINTK("ENTER\n");
ap->ops->port_disable(ap);
ata_host_remove(ap, 0);
- for (i = 0; i < ATA_MAX_DEVICES; i++)
- kfree(ap->device[i].id);
DPRINTK("EXIT\n");
return 1;
@@ -5277,7 +5542,7 @@ EXPORT_SYMBOL_GPL(ata_device_add);
EXPORT_SYMBOL_GPL(ata_host_set_remove);
EXPORT_SYMBOL_GPL(ata_sg_init);
EXPORT_SYMBOL_GPL(ata_sg_init_one);
-EXPORT_SYMBOL_GPL(__ata_qc_complete);
+EXPORT_SYMBOL_GPL(ata_qc_complete);
EXPORT_SYMBOL_GPL(ata_qc_issue_prot);
EXPORT_SYMBOL_GPL(ata_tf_load);
EXPORT_SYMBOL_GPL(ata_tf_read);
@@ -5299,8 +5564,13 @@ EXPORT_SYMBOL_GPL(ata_bmdma_start);
EXPORT_SYMBOL_GPL(ata_bmdma_irq_clear);
EXPORT_SYMBOL_GPL(ata_bmdma_status);
EXPORT_SYMBOL_GPL(ata_bmdma_stop);
+EXPORT_SYMBOL_GPL(ata_bmdma_freeze);
+EXPORT_SYMBOL_GPL(ata_bmdma_thaw);
+EXPORT_SYMBOL_GPL(ata_bmdma_drive_eh);
+EXPORT_SYMBOL_GPL(ata_bmdma_error_handler);
+EXPORT_SYMBOL_GPL(ata_bmdma_post_internal_cmd);
EXPORT_SYMBOL_GPL(ata_port_probe);
-EXPORT_SYMBOL_GPL(ata_set_sata_spd);
+EXPORT_SYMBOL_GPL(sata_set_spd);
EXPORT_SYMBOL_GPL(sata_phy_reset);
EXPORT_SYMBOL_GPL(__sata_phy_reset);
EXPORT_SYMBOL_GPL(ata_bus_reset);
@@ -5323,6 +5593,12 @@ EXPORT_SYMBOL_GPL(ata_scsi_queuecmd);
EXPORT_SYMBOL_GPL(ata_scsi_slave_config);
EXPORT_SYMBOL_GPL(ata_scsi_release);
EXPORT_SYMBOL_GPL(ata_host_intr);
+EXPORT_SYMBOL_GPL(sata_scr_valid);
+EXPORT_SYMBOL_GPL(sata_scr_read);
+EXPORT_SYMBOL_GPL(sata_scr_write);
+EXPORT_SYMBOL_GPL(sata_scr_write_flush);
+EXPORT_SYMBOL_GPL(ata_port_online);
+EXPORT_SYMBOL_GPL(ata_port_offline);
EXPORT_SYMBOL_GPL(ata_id_string);
EXPORT_SYMBOL_GPL(ata_id_c_string);
EXPORT_SYMBOL_GPL(ata_scsi_simulate);
@@ -5348,7 +5624,12 @@ EXPORT_SYMBOL_GPL(ata_device_resume);
EXPORT_SYMBOL_GPL(ata_scsi_device_suspend);
EXPORT_SYMBOL_GPL(ata_scsi_device_resume);
-EXPORT_SYMBOL_GPL(ata_scsi_error);
EXPORT_SYMBOL_GPL(ata_eng_timeout);
+EXPORT_SYMBOL_GPL(ata_port_schedule_eh);
+EXPORT_SYMBOL_GPL(ata_port_abort);
+EXPORT_SYMBOL_GPL(ata_port_freeze);
+EXPORT_SYMBOL_GPL(ata_eh_freeze_port);
+EXPORT_SYMBOL_GPL(ata_eh_thaw_port);
EXPORT_SYMBOL_GPL(ata_eh_qc_complete);
EXPORT_SYMBOL_GPL(ata_eh_qc_retry);
+EXPORT_SYMBOL_GPL(ata_do_eh);
diff --git a/drivers/scsi/libata-eh.c b/drivers/scsi/libata-eh.c
index 16db6221171..e401f353f84 100644
--- a/drivers/scsi/libata-eh.c
+++ b/drivers/scsi/libata-eh.c
@@ -44,6 +44,53 @@
#include "libata.h"
+static void __ata_port_freeze(struct ata_port *ap);
+
+static void ata_ering_record(struct ata_ering *ering, int is_io,
+ unsigned int err_mask)
+{
+ struct ata_ering_entry *ent;
+
+ WARN_ON(!err_mask);
+
+ ering->cursor++;
+ ering->cursor %= ATA_ERING_SIZE;
+
+ ent = &ering->ring[ering->cursor];
+ ent->is_io = is_io;
+ ent->err_mask = err_mask;
+ ent->timestamp = get_jiffies_64();
+}
+
+static struct ata_ering_entry * ata_ering_top(struct ata_ering *ering)
+{
+ struct ata_ering_entry *ent = &ering->ring[ering->cursor];
+ if (!ent->err_mask)
+ return NULL;
+ return ent;
+}
+
+static int ata_ering_map(struct ata_ering *ering,
+ int (*map_fn)(struct ata_ering_entry *, void *),
+ void *arg)
+{
+ int idx, rc = 0;
+ struct ata_ering_entry *ent;
+
+ idx = ering->cursor;
+ do {
+ ent = &ering->ring[idx];
+ if (!ent->err_mask)
+ break;
+ rc = map_fn(ent, arg);
+ if (rc)
+ break;
+ idx = (idx - 1 + ATA_ERING_SIZE) % ATA_ERING_SIZE;
+ } while (idx != ering->cursor);
+
+ return rc;
+}
+
/**
* ata_scsi_timed_out - SCSI layer time out callback
* @cmd: timed out SCSI command
@@ -55,6 +102,8 @@
* from finishing it by setting EH_SCHEDULED and return
* EH_NOT_HANDLED.
*
+ * TODO: kill this function once old EH is gone.
+ *
* LOCKING:
* Called from timer context
*
@@ -67,10 +116,16 @@ enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd)
struct ata_port *ap = ata_shost_to_port(host);
unsigned long flags;
struct ata_queued_cmd *qc;
- enum scsi_eh_timer_return ret = EH_HANDLED;
+ enum scsi_eh_timer_return ret;
DPRINTK("ENTER\n");
+ if (ap->ops->error_handler) {
+ ret = EH_NOT_HANDLED;
+ goto out;
+ }
+
+ ret = EH_HANDLED;
spin_lock_irqsave(&ap->host_set->lock, flags);
qc = ata_qc_from_tag(ap, ap->active_tag);
if (qc) {
@@ -81,6 +136,7 @@ enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd)
}
spin_unlock_irqrestore(&ap->host_set->lock, flags);
+ out:
DPRINTK("EXIT, ret=%d\n", ret);
return ret;
}
@@ -100,21 +156,141 @@ enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd)
void ata_scsi_error(struct Scsi_Host *host)
{
struct ata_port *ap = ata_shost_to_port(host);
+ spinlock_t *hs_lock = &ap->host_set->lock;
+ int i, repeat_cnt = ATA_EH_MAX_REPEAT;
+ unsigned long flags;
DPRINTK("ENTER\n");
- /* synchronize with IRQ handler and port task */
- spin_unlock_wait(&ap->host_set->lock);
+ /* synchronize with port task */
ata_port_flush_task(ap);
- WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL);
+ /* synchronize with host_set lock and sort out timeouts */
+
+ /* For new EH, all qcs are finished in one of three ways -
+ * normal completion, error completion, and SCSI timeout.
+ * Both cmpletions can race against SCSI timeout. When normal
+ * completion wins, the qc never reaches EH. When error
+ * completion wins, the qc has ATA_QCFLAG_FAILED set.
+ *
+ * When SCSI timeout wins, things are a bit more complex.
+ * Normal or error completion can occur after the timeout but
+ * before this point. In such cases, both types of
+ * completions are honored. A scmd is determined to have
+ * timed out iff its associated qc is active and not failed.
+ */
+ if (ap->ops->error_handler) {
+ struct scsi_cmnd *scmd, *tmp;
+ int nr_timedout = 0;
+
+ spin_lock_irqsave(hs_lock, flags);
+
+ list_for_each_entry_safe(scmd, tmp, &host->eh_cmd_q, eh_entry) {
+ struct ata_queued_cmd *qc;
+
+ for (i = 0; i < ATA_MAX_QUEUE; i++) {
+ qc = __ata_qc_from_tag(ap, i);
+ if (qc->flags & ATA_QCFLAG_ACTIVE &&
+ qc->scsicmd == scmd)
+ break;
+ }
+
+ if (i < ATA_MAX_QUEUE) {
+ /* the scmd has an associated qc */
+ if (!(qc->flags & ATA_QCFLAG_FAILED)) {
+ /* which hasn't failed yet, timeout */
+ qc->err_mask |= AC_ERR_TIMEOUT;
+ qc->flags |= ATA_QCFLAG_FAILED;
+ nr_timedout++;
+ }
+ } else {
+ /* Normal completion occurred after
+ * SCSI timeout but before this point.
+ * Successfully complete it.
+ */
+ scmd->retries = scmd->allowed;
+ scsi_eh_finish_cmd(scmd, &ap->eh_done_q);
+ }
+ }
- ap->ops->eng_timeout(ap);
+ /* If we have timed out qcs. They belong to EH from
+ * this point but the state of the controller is
+ * unknown. Freeze the port to make sure the IRQ
+ * handler doesn't diddle with those qcs. This must
+ * be done atomically w.r.t. setting QCFLAG_FAILED.
+ */
+ if (nr_timedout)
+ __ata_port_freeze(ap);
+ spin_unlock_irqrestore(hs_lock, flags);
+ } else
+ spin_unlock_wait(hs_lock);
+
+ repeat:
+ /* invoke error handler */
+ if (ap->ops->error_handler) {
+ /* fetch & clear EH info */
+ spin_lock_irqsave(hs_lock, flags);
+
+ memset(&ap->eh_context, 0, sizeof(ap->eh_context));
+ ap->eh_context.i = ap->eh_info;
+ memset(&ap->eh_info, 0, sizeof(ap->eh_info));
+
+ ap->flags &= ~ATA_FLAG_EH_PENDING;
+
+ spin_unlock_irqrestore(hs_lock, flags);
+
+ /* invoke EH */
+ ap->ops->error_handler(ap);
+
+ /* Exception might have happend after ->error_handler
+ * recovered the port but before this point. Repeat
+ * EH in such case.
+ */
+ spin_lock_irqsave(hs_lock, flags);
+
+ if (ap->flags & ATA_FLAG_EH_PENDING) {
+ if (--repeat_cnt) {
+ ata_port_printk(ap, KERN_INFO,
+ "EH pending after completion, "
+ "repeating EH (cnt=%d)\n", repeat_cnt);
+ spin_unlock_irqrestore(hs_lock, flags);
+ goto repeat;
+ }
+ ata_port_printk(ap, KERN_ERR, "EH pending after %d "
+ "tries, giving up\n", ATA_EH_MAX_REPEAT);
+ }
+
+ /* this run is complete, make sure EH info is clear */
+ memset(&ap->eh_info, 0, sizeof(ap->eh_info));
+
+ /* Clear host_eh_scheduled while holding hs_lock such
+ * that if exception occurs after this point but
+ * before EH completion, SCSI midlayer will
+ * re-initiate EH.
+ */
+ host->host_eh_scheduled = 0;
+
+ spin_unlock_irqrestore(hs_lock, flags);
+ } else {
+ WARN_ON(ata_qc_from_tag(ap, ap->active_tag) == NULL);
+ ap->ops->eng_timeout(ap);
+ }
+
+ /* finish or retry handled scmd's and clean up */
WARN_ON(host->host_failed || !list_empty(&host->eh_cmd_q));
scsi_eh_flush_done_q(&ap->eh_done_q);
+ /* clean up */
+ spin_lock_irqsave(hs_lock, flags);
+
+ if (ap->flags & ATA_FLAG_RECOVERED)
+ ata_port_printk(ap, KERN_INFO, "EH complete\n");
+ ap->flags &= ~ATA_FLAG_RECOVERED;
+
+ spin_unlock_irqrestore(hs_lock, flags);
+
DPRINTK("EXIT\n");
}
@@ -133,6 +309,8 @@ void ata_scsi_error(struct Scsi_Host *host)
* an interrupt was not delivered to the driver, even though the
* transaction completed successfully.
*
+ * TODO: kill this function once old EH is gone.
+ *
* LOCKING:
* Inherited from SCSI layer (none, can sleep)
*/
@@ -167,8 +345,9 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc)
/* ack bmdma irq events */
ap->ops->irq_clear(ap);
- printk(KERN_ERR "ata%u: command 0x%x timeout, stat 0x%x host_stat 0x%x\n",
- ap->id, qc->tf.command, drv_stat, host_stat);
+ ata_dev_printk(qc->dev, KERN_ERR, "command 0x%x timeout, "
+ "stat 0x%x host_stat 0x%x\n",
+ qc->tf.command, drv_stat, host_stat);
/* complete taskfile transaction */
qc->err_mask |= AC_ERR_TIMEOUT;
@@ -197,6 +376,8 @@ static void ata_qc_timeout(struct ata_queued_cmd *qc)
* an interrupt was not delivered to the driver, even though the
* transaction completed successfully.
*
+ * TODO: kill this function once old EH is gone.
+ *
* LOCKING:
* Inherited from SCSI layer (none, can sleep)
*/
@@ -209,6 +390,190 @@ void ata_eng_timeout(struct ata_port *ap)
DPRINTK("EXIT\n");
}
+/**
+ * ata_qc_schedule_eh - schedule qc for error handling
+ * @qc: command to schedule error handling for
+ *
+ * Schedule error handling for @qc. EH will kick in as soon as
+ * other commands are drained.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+void ata_qc_schedule_eh(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ WARN_ON(!ap->ops->error_handler);
+
+ qc->flags |= ATA_QCFLAG_FAILED;
+ qc->ap->flags |= ATA_FLAG_EH_PENDING;
+
+ /* The following will fail if timeout has already expired.
+ * ata_scsi_error() takes care of such scmds on EH entry.
+ * Note that ATA_QCFLAG_FAILED is unconditionally set after
+ * this function completes.
+ */
+ scsi_req_abort_cmd(qc->scsicmd);
+}
+
+/**
+ * ata_port_schedule_eh - schedule error handling without a qc
+ * @ap: ATA port to schedule EH for
+ *
+ * Schedule error handling for @ap. EH will kick in as soon as
+ * all commands are drained.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+void ata_port_schedule_eh(struct ata_port *ap)
+{
+ WARN_ON(!ap->ops->error_handler);
+
+ ap->flags |= ATA_FLAG_EH_PENDING;
+ ata_schedule_scsi_eh(ap->host);
+
+ DPRINTK("port EH scheduled\n");
+}
+
+/**
+ * ata_port_abort - abort all qc's on the port
+ * @ap: ATA port to abort qc's for
+ *
+ * Abort all active qc's of @ap and schedule EH.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ *
+ * RETURNS:
+ * Number of aborted qc's.
+ */
+int ata_port_abort(struct ata_port *ap)
+{
+ int tag, nr_aborted = 0;
+
+ WARN_ON(!ap->ops->error_handler);
+
+ for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
+ struct ata_queued_cmd *qc = ata_qc_from_tag(ap, tag);
+
+ if (qc) {
+ qc->flags |= ATA_QCFLAG_FAILED;
+ ata_qc_complete(qc);
+ nr_aborted++;
+ }
+ }
+
+ if (!nr_aborted)
+ ata_port_schedule_eh(ap);
+
+ return nr_aborted;
+}
+
+/**
+ * __ata_port_freeze - freeze port
+ * @ap: ATA port to freeze
+ *
+ * This function is called when HSM violation or some other
+ * condition disrupts normal operation of the port. Frozen port
+ * is not allowed to perform any operation until the port is
+ * thawed, which usually follows a successful reset.
+ *
+ * ap->ops->freeze() callback can be used for freezing the port
+ * hardware-wise (e.g. mask interrupt and stop DMA engine). If a
+ * port cannot be frozen hardware-wise, the interrupt handler
+ * must ack and clear interrupts unconditionally while the port
+ * is frozen.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ */
+static void __ata_port_freeze(struct ata_port *ap)
+{
+ WARN_ON(!ap->ops->error_handler);
+
+ if (ap->ops->freeze)
+ ap->ops->freeze(ap);
+
+ ap->flags |= ATA_FLAG_FROZEN;
+
+ DPRINTK("ata%u port frozen\n", ap->id);
+}
+
+/**
+ * ata_port_freeze - abort & freeze port
+ * @ap: ATA port to freeze
+ *
+ * Abort and freeze @ap.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ *
+ * RETURNS:
+ * Number of aborted commands.
+ */
+int ata_port_freeze(struct ata_port *ap)
+{
+ int nr_aborted;
+
+ WARN_ON(!ap->ops->error_handler);
+
+ nr_aborted = ata_port_abort(ap);
+ __ata_port_freeze(ap);
+
+ return nr_aborted;
+}
+
+/**
+ * ata_eh_freeze_port - EH helper to freeze port
+ * @ap: ATA port to freeze
+ *
+ * Freeze @ap.
+ *
+ * LOCKING:
+ * None.
+ */
+void ata_eh_freeze_port(struct ata_port *ap)
+{
+ unsigned long flags;
+
+ if (!ap->ops->error_handler)
+ return;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ __ata_port_freeze(ap);
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+}
+
+/**
+ * ata_port_thaw_port - EH helper to thaw port
+ * @ap: ATA port to thaw
+ *
+ * Thaw frozen port @ap.
+ *
+ * LOCKING:
+ * None.
+ */
+void ata_eh_thaw_port(struct ata_port *ap)
+{
+ unsigned long flags;
+
+ if (!ap->ops->error_handler)
+ return;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+
+ ap->flags &= ~ATA_FLAG_FROZEN;
+
+ if (ap->ops->thaw)
+ ap->ops->thaw(ap);
+
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+
+ DPRINTK("ata%u port thawed\n", ap->id);
+}
+
static void ata_eh_scsidone(struct scsi_cmnd *scmd)
{
/* nada */
@@ -261,3 +626,778 @@ void ata_eh_qc_retry(struct ata_queued_cmd *qc)
scmd->retries--;
__ata_eh_qc_complete(qc);
}
+
+/**
+ * ata_eh_about_to_do - about to perform eh_action
+ * @ap: target ATA port
+ * @action: action about to be performed
+ *
+ * Called just before performing EH actions to clear related bits
+ * in @ap->eh_info such that eh actions are not unnecessarily
+ * repeated.
+ *
+ * LOCKING:
+ * None.
+ */
+static void ata_eh_about_to_do(struct ata_port *ap, unsigned int action)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(&ap->host_set->lock, flags);
+ ap->eh_info.action &= ~action;
+ ap->flags |= ATA_FLAG_RECOVERED;
+ spin_unlock_irqrestore(&ap->host_set->lock, flags);
+}
+
+/**
+ * ata_err_string - convert err_mask to descriptive string
+ * @err_mask: error mask to convert to string
+ *
+ * Convert @err_mask to descriptive string. Errors are
+ * prioritized according to severity and only the most severe
+ * error is reported.
+ *
+ * LOCKING:
+ * None.
+ *
+ * RETURNS:
+ * Descriptive string for @err_mask
+ */
+static const char * ata_err_string(unsigned int err_mask)
+{
+ if (err_mask & AC_ERR_HOST_BUS)
+ return "host bus error";
+ if (err_mask & AC_ERR_ATA_BUS)
+ return "ATA bus error";
+ if (err_mask & AC_ERR_TIMEOUT)
+ return "timeout";
+ if (err_mask & AC_ERR_HSM)
+ return "HSM violation";
+ if (err_mask & AC_ERR_SYSTEM)
+ return "internal error";
+ if (err_mask & AC_ERR_MEDIA)
+ return "media error";
+ if (err_mask & AC_ERR_INVALID)
+ return "invalid argument";
+ if (err_mask & AC_ERR_DEV)
+ return "device error";
+ return "unknown error";
+}
+
+/**
+ * atapi_eh_request_sense - perform ATAPI REQUEST_SENSE
+ * @dev: device to perform REQUEST_SENSE to
+ * @sense_buf: result sense data buffer (SCSI_SENSE_BUFFERSIZE bytes long)
+ *
+ * Perform ATAPI REQUEST_SENSE after the device reported CHECK
+ * SENSE. This function is EH helper.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, AC_ERR_* mask on failure
+ */
+static unsigned int atapi_eh_request_sense(struct ata_device *dev,
+ unsigned char *sense_buf)
+{
+ struct ata_port *ap = dev->ap;
+ struct ata_taskfile tf;
+ u8 cdb[ATAPI_CDB_LEN];
+
+ DPRINTK("ATAPI request sense\n");
+
+ ata_tf_init(dev, &tf);
+
+ /* FIXME: is this needed? */
+ memset(sense_buf, 0, SCSI_SENSE_BUFFERSIZE);
+
+ /* XXX: why tf_read here? */
+ ap->ops->tf_read(ap, &tf);
+
+ /* fill these in, for the case where they are -not- overwritten */
+ sense_buf[0] = 0x70;
+ sense_buf[2] = tf.feature >> 4;
+
+ memset(cdb, 0, ATAPI_CDB_LEN);
+ cdb[0] = REQUEST_SENSE;
+ cdb[4] = SCSI_SENSE_BUFFERSIZE;
+
+ tf.flags |= ATA_TFLAG_ISADDR | ATA_TFLAG_DEVICE;
+ tf.command = ATA_CMD_PACKET;
+
+ /* is it pointless to prefer PIO for "safety reasons"? */
+ if (ap->flags & ATA_FLAG_PIO_DMA) {
+ tf.protocol = ATA_PROT_ATAPI_DMA;
+ tf.feature |= ATAPI_PKT_DMA;
+ } else {
+ tf.protocol = ATA_PROT_ATAPI;
+ tf.lbam = (8 * 1024) & 0xff;
+ tf.lbah = (8 * 1024) >> 8;
+ }
+
+ return ata_exec_internal(dev, &tf, cdb, DMA_FROM_DEVICE,
+ sense_buf, SCSI_SENSE_BUFFERSIZE);
+}
+
+/**
+ * ata_eh_analyze_serror - analyze SError for a failed port
+ * @ap: ATA port to analyze SError for
+ *
+ * Analyze SError if available and further determine cause of
+ * failure.
+ *
+ * LOCKING:
+ * None.
+ */
+static void ata_eh_analyze_serror(struct ata_port *ap)
+{
+ struct ata_eh_context *ehc = &ap->eh_context;
+ u32 serror = ehc->i.serror;
+ unsigned int err_mask = 0, action = 0;
+
+ if (serror & SERR_PERSISTENT) {
+ err_mask |= AC_ERR_ATA_BUS;
+ action |= ATA_EH_HARDRESET;
+ }
+ if (serror &
+ (SERR_DATA_RECOVERED | SERR_COMM_RECOVERED | SERR_DATA)) {
+ err_mask |= AC_ERR_ATA_BUS;
+ action |= ATA_EH_SOFTRESET;
+ }
+ if (serror & SERR_PROTOCOL) {
+ err_mask |= AC_ERR_HSM;
+ action |= ATA_EH_SOFTRESET;
+ }
+ if (serror & SERR_INTERNAL) {
+ err_mask |= AC_ERR_SYSTEM;
+ action |= ATA_EH_SOFTRESET;
+ }
+ if (serror & (SERR_PHYRDY_CHG | SERR_DEV_XCHG)) {
+ err_mask |= AC_ERR_ATA_BUS;
+ action |= ATA_EH_HARDRESET;
+ }
+
+ ehc->i.err_mask |= err_mask;
+ ehc->i.action |= action;
+}
+
+/**
+ * ata_eh_analyze_tf - analyze taskfile of a failed qc
+ * @qc: qc to analyze
+ * @tf: Taskfile registers to analyze
+ *
+ * Analyze taskfile of @qc and further determine cause of
+ * failure. This function also requests ATAPI sense data if
+ * avaliable.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ *
+ * RETURNS:
+ * Determined recovery action
+ */
+static unsigned int ata_eh_analyze_tf(struct ata_queued_cmd *qc,
+ const struct ata_taskfile *tf)
+{
+ unsigned int tmp, action = 0;
+ u8 stat = tf->command, err = tf->feature;
+
+ if ((stat & (ATA_BUSY | ATA_DRQ | ATA_DRDY)) != ATA_DRDY) {
+ qc->err_mask |= AC_ERR_HSM;
+ return ATA_EH_SOFTRESET;
+ }
+
+ if (!(qc->err_mask & AC_ERR_DEV))
+ return 0;
+
+ switch (qc->dev->class) {
+ case ATA_DEV_ATA:
+ if (err & ATA_ICRC)
+ qc->err_mask |= AC_ERR_ATA_BUS;
+ if (err & ATA_UNC)
+ qc->err_mask |= AC_ERR_MEDIA;
+ if (err & ATA_IDNF)
+ qc->err_mask |= AC_ERR_INVALID;
+ break;
+
+ case ATA_DEV_ATAPI:
+ tmp = atapi_eh_request_sense(qc->dev,
+ qc->scsicmd->sense_buffer);
+ if (!tmp) {
+ /* ATA_QCFLAG_SENSE_VALID is used to tell
+ * atapi_qc_complete() that sense data is
+ * already valid.
+ *
+ * TODO: interpret sense data and set
+ * appropriate err_mask.
+ */
+ qc->flags |= ATA_QCFLAG_SENSE_VALID;
+ } else
+ qc->err_mask |= tmp;
+ }
+
+ if (qc->err_mask & (AC_ERR_HSM | AC_ERR_TIMEOUT | AC_ERR_ATA_BUS))
+ action |= ATA_EH_SOFTRESET;
+
+ return action;
+}
+
+static int ata_eh_categorize_ering_entry(struct ata_ering_entry *ent)
+{
+ if (ent->err_mask & (AC_ERR_ATA_BUS | AC_ERR_TIMEOUT))
+ return 1;
+
+ if (ent->is_io) {
+ if (ent->err_mask & AC_ERR_HSM)
+ return 1;
+ if ((ent->err_mask &
+ (AC_ERR_DEV|AC_ERR_MEDIA|AC_ERR_INVALID)) == AC_ERR_DEV)
+ return 2;
+ }
+
+ return 0;
+}
+
+struct speed_down_needed_arg {
+ u64 since;
+ int nr_errors[3];
+};
+
+static int speed_down_needed_cb(struct ata_ering_entry *ent, void *void_arg)
+{
+ struct speed_down_needed_arg *arg = void_arg;
+
+ if (ent->timestamp < arg->since)
+ return -1;
+
+ arg->nr_errors[ata_eh_categorize_ering_entry(ent)]++;
+ return 0;
+}
+
+/**
+ * ata_eh_speed_down_needed - Determine wheter speed down is necessary
+ * @dev: Device of interest
+ *
+ * This function examines error ring of @dev and determines
+ * whether speed down is necessary. Speed down is necessary if
+ * there have been more than 3 of Cat-1 errors or 10 of Cat-2
+ * errors during last 15 minutes.
+ *
+ * Cat-1 errors are ATA_BUS, TIMEOUT for any command and HSM
+ * violation for known supported commands.
+ *
+ * Cat-2 errors are unclassified DEV error for known supported
+ * command.
+ *
+ * LOCKING:
+ * Inherited from caller.
+ *
+ * RETURNS:
+ * 1 if speed down is necessary, 0 otherwise
+ */
+static int ata_eh_speed_down_needed(struct ata_device *dev)
+{
+ const u64 interval = 15LLU * 60 * HZ;
+ static const int err_limits[3] = { -1, 3, 10 };
+ struct speed_down_needed_arg arg;
+ struct ata_ering_entry *ent;
+ int err_cat;
+ u64 j64;
+
+ ent = ata_ering_top(&dev->ering);
+ if (!ent)
+ return 0;
+
+ err_cat = ata_eh_categorize_ering_entry(ent);
+ if (err_cat == 0)
+ return 0;
+
+ memset(&arg, 0, sizeof(arg));
+
+ j64 = get_jiffies_64();
+ if (j64 >= interval)
+ arg.since = j64 - interval;
+ else
+ arg.since = 0;
+
+ ata_ering_map(&dev->ering, speed_down_needed_cb, &arg);
+
+ return arg.nr_errors[err_cat] > err_limits[err_cat];
+}
+
+/**
+ * ata_eh_speed_down - record error and speed down if necessary
+ * @dev: Failed device
+ * @is_io: Did the device fail during normal IO?
+ * @err_mask: err_mask of the error
+ *
+ * Record error and examine error history to determine whether
+ * adjusting transmission speed is necessary. It also sets
+ * transmission limits appropriately if such adjustment is
+ * necessary.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno otherwise
+ */
+static int ata_eh_speed_down(struct ata_device *dev, int is_io,
+ unsigned int err_mask)
+{
+ if (!err_mask)
+ return 0;
+
+ /* record error and determine whether speed down is necessary */
+ ata_ering_record(&dev->ering, is_io, err_mask);
+
+ if (!ata_eh_speed_down_needed(dev))
+ return 0;
+
+ /* speed down SATA link speed if possible */
+ if (sata_down_spd_limit(dev->ap) == 0)
+ return ATA_EH_HARDRESET;
+
+ /* lower transfer mode */
+ if (ata_down_xfermask_limit(dev, 0) == 0)
+ return ATA_EH_SOFTRESET;
+
+ ata_dev_printk(dev, KERN_ERR,
+ "speed down requested but no transfer mode left\n");
+ return 0;
+}
+
+/**
+ * ata_eh_autopsy - analyze error and determine recovery action
+ * @ap: ATA port to perform autopsy on
+ *
+ * Analyze why @ap failed and determine which recovery action is
+ * needed. This function also sets more detailed AC_ERR_* values
+ * and fills sense data for ATAPI CHECK SENSE.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ */
+static void ata_eh_autopsy(struct ata_port *ap)
+{
+ struct ata_eh_context *ehc = &ap->eh_context;
+ unsigned int action = ehc->i.action;
+ struct ata_device *failed_dev = NULL;
+ unsigned int all_err_mask = 0;
+ int tag, is_io = 0;
+ u32 serror;
+ int rc;
+
+ DPRINTK("ENTER\n");
+
+ /* obtain and analyze SError */
+ rc = sata_scr_read(ap, SCR_ERROR, &serror);
+ if (rc == 0) {
+ ehc->i.serror |= serror;
+ ata_eh_analyze_serror(ap);
+ } else if (rc != -EOPNOTSUPP)
+ action |= ATA_EH_HARDRESET;
+
+ /* any real error trumps AC_ERR_OTHER */
+ if (ehc->i.err_mask & ~AC_ERR_OTHER)
+ ehc->i.err_mask &= ~AC_ERR_OTHER;
+
+ all_err_mask |= ehc->i.err_mask;
+
+ for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
+ struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
+
+ if (!(qc->flags & ATA_QCFLAG_FAILED))
+ continue;
+
+ /* inherit upper level err_mask */
+ qc->err_mask |= ehc->i.err_mask;
+
+ if (qc->err_mask & AC_ERR_TIMEOUT)
+ action |= ATA_EH_SOFTRESET;
+
+ /* analyze TF */
+ action |= ata_eh_analyze_tf(qc, &qc->result_tf);
+
+ /* DEV errors are probably spurious in case of ATA_BUS error */
+ if (qc->err_mask & AC_ERR_ATA_BUS)
+ qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_MEDIA |
+ AC_ERR_INVALID);
+
+ /* any real error trumps unknown error */
+ if (qc->err_mask & ~AC_ERR_OTHER)
+ qc->err_mask &= ~AC_ERR_OTHER;
+
+ /* SENSE_VALID trumps dev/unknown error and revalidation */
+ if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
+ qc->err_mask &= ~(AC_ERR_DEV | AC_ERR_OTHER);
+ action &= ~ATA_EH_REVALIDATE;
+ }
+
+ /* accumulate error info */
+ failed_dev = qc->dev;
+ all_err_mask |= qc->err_mask;
+ if (qc->flags & ATA_QCFLAG_IO)
+ is_io = 1;
+ }
+
+ /* speed down iff command was in progress */
+ if (failed_dev)
+ action |= ata_eh_speed_down(failed_dev, is_io, all_err_mask);
+
+ if (all_err_mask)
+ action |= ATA_EH_REVALIDATE;
+
+ ehc->i.dev = failed_dev;
+ ehc->i.action = action;
+
+ DPRINTK("EXIT\n");
+}
+
+/**
+ * ata_eh_report - report error handling to user
+ * @ap: ATA port EH is going on
+ *
+ * Report EH to user.
+ *
+ * LOCKING:
+ * None.
+ */
+static void ata_eh_report(struct ata_port *ap)
+{
+ struct ata_eh_context *ehc = &ap->eh_context;
+ const char *frozen, *desc;
+ int tag, nr_failed = 0;
+
+ desc = NULL;
+ if (ehc->i.desc[0] != '\0')
+ desc = ehc->i.desc;
+
+ for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
+ struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
+
+ if (!(qc->flags & ATA_QCFLAG_FAILED))
+ continue;
+ if (qc->flags & ATA_QCFLAG_SENSE_VALID && !qc->err_mask)
+ continue;
+
+ nr_failed++;
+ }
+
+ if (!nr_failed && !ehc->i.err_mask)
+ return;
+
+ frozen = "";
+ if (ap->flags & ATA_FLAG_FROZEN)
+ frozen = " frozen";
+
+ if (ehc->i.dev) {
+ ata_dev_printk(ehc->i.dev, KERN_ERR,
+ "exception Emask 0x%x SErr 0x%x action 0x%x%s\n",
+ ehc->i.err_mask, ehc->i.serror, ehc->i.action,
+ frozen);
+ if (desc)
+ ata_dev_printk(ehc->i.dev, KERN_ERR, "(%s)\n", desc);
+ } else {
+ ata_port_printk(ap, KERN_ERR,
+ "exception Emask 0x%x SErr 0x%x action 0x%x%s\n",
+ ehc->i.err_mask, ehc->i.serror, ehc->i.action,
+ frozen);
+ if (desc)
+ ata_port_printk(ap, KERN_ERR, "(%s)\n", desc);
+ }
+
+ for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
+ struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
+
+ if (!(qc->flags & ATA_QCFLAG_FAILED) || !qc->err_mask)
+ continue;
+
+ ata_dev_printk(qc->dev, KERN_ERR, "tag %d cmd 0x%x "
+ "Emask 0x%x stat 0x%x err 0x%x (%s)\n",
+ qc->tag, qc->tf.command, qc->err_mask,
+ qc->result_tf.command, qc->result_tf.feature,
+ ata_err_string(qc->err_mask));
+ }
+}
+
+static int ata_eh_reset(struct ata_port *ap, ata_reset_fn_t softreset,
+ ata_reset_fn_t hardreset, ata_postreset_fn_t postreset)
+{
+ struct ata_eh_context *ehc = &ap->eh_context;
+ unsigned int classes[ATA_MAX_DEVICES];
+ int tries = ATA_EH_RESET_TRIES;
+ ata_reset_fn_t reset;
+ int rc;
+
+ if (softreset && (!hardreset || (!sata_set_spd_needed(ap) &&
+ !(ehc->i.action & ATA_EH_HARDRESET))))
+ reset = softreset;
+ else
+ reset = hardreset;
+
+ retry:
+ ata_port_printk(ap, KERN_INFO, "%s resetting port\n",
+ reset == softreset ? "soft" : "hard");
+
+ /* reset */
+ ata_eh_about_to_do(ap, ATA_EH_RESET_MASK);
+ ehc->i.flags |= ATA_EHI_DID_RESET;
+
+ rc = ata_do_reset(ap, reset, classes);
+
+ if (rc && --tries) {
+ ata_port_printk(ap, KERN_WARNING,
+ "%sreset failed, retrying in 5 secs\n",
+ reset == softreset ? "soft" : "hard");
+ ssleep(5);
+
+ if (reset == hardreset)
+ sata_down_spd_limit(ap);
+ if (hardreset)
+ reset = hardreset;
+ goto retry;
+ }
+
+ if (rc == 0) {
+ if (postreset)
+ postreset(ap, classes);
+
+ /* reset successful, schedule revalidation */
+ ehc->i.dev = NULL;
+ ehc->i.action &= ~ATA_EH_RESET_MASK;
+ ehc->i.action |= ATA_EH_REVALIDATE;
+ }
+
+ return rc;
+}
+
+static int ata_eh_revalidate(struct ata_port *ap,
+ struct ata_device **r_failed_dev)
+{
+ struct ata_eh_context *ehc = &ap->eh_context;
+ struct ata_device *dev;
+ int i, rc = 0;
+
+ DPRINTK("ENTER\n");
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ dev = &ap->device[i];
+
+ if (ehc->i.action & ATA_EH_REVALIDATE && ata_dev_enabled(dev) &&
+ (!ehc->i.dev || ehc->i.dev == dev)) {
+ if (ata_port_offline(ap)) {
+ rc = -EIO;
+ break;
+ }
+
+ ata_eh_about_to_do(ap, ATA_EH_REVALIDATE);
+ rc = ata_dev_revalidate(dev,
+ ehc->i.flags & ATA_EHI_DID_RESET);
+ if (rc)
+ break;
+
+ ehc->i.action &= ~ATA_EH_REVALIDATE;
+ }
+ }
+
+ if (rc)
+ *r_failed_dev = dev;
+
+ DPRINTK("EXIT\n");
+ return rc;
+}
+
+static int ata_port_nr_enabled(struct ata_port *ap)
+{
+ int i, cnt = 0;
+
+ for (i = 0; i < ATA_MAX_DEVICES; i++)
+ if (ata_dev_enabled(&ap->device[i]))
+ cnt++;
+ return cnt;
+}
+
+/**
+ * ata_eh_recover - recover host port after error
+ * @ap: host port to recover
+ * @softreset: softreset method (can be NULL)
+ * @hardreset: hardreset method (can be NULL)
+ * @postreset: postreset method (can be NULL)
+ *
+ * This is the alpha and omega, eum and yang, heart and soul of
+ * libata exception handling. On entry, actions required to
+ * recover each devices are recorded in eh_context. This
+ * function executes all the operations with appropriate retrials
+ * and fallbacks to resurrect failed devices.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ *
+ * RETURNS:
+ * 0 on success, -errno on failure.
+ */
+static int ata_eh_recover(struct ata_port *ap, ata_reset_fn_t softreset,
+ ata_reset_fn_t hardreset,
+ ata_postreset_fn_t postreset)
+{
+ struct ata_eh_context *ehc = &ap->eh_context;
+ struct ata_device *dev;
+ int down_xfermask, i, rc;
+
+ DPRINTK("ENTER\n");
+
+ /* prep for recovery */
+ for (i = 0; i < ATA_MAX_DEVICES; i++) {
+ dev = &ap->device[i];
+
+ ehc->tries[dev->devno] = ATA_EH_DEV_TRIES;
+ }
+
+ retry:
+ down_xfermask = 0;
+ rc = 0;
+
+ /* skip EH if possible. */
+ if (!ata_port_nr_enabled(ap) && !(ap->flags & ATA_FLAG_FROZEN))
+ ehc->i.action = 0;
+
+ /* reset */
+ if (ehc->i.action & ATA_EH_RESET_MASK) {
+ ata_eh_freeze_port(ap);
+
+ rc = ata_eh_reset(ap, softreset, hardreset, postreset);
+ if (rc) {
+ ata_port_printk(ap, KERN_ERR,
+ "reset failed, giving up\n");
+ goto out;
+ }
+
+ ata_eh_thaw_port(ap);
+ }
+
+ /* revalidate existing devices */
+ rc = ata_eh_revalidate(ap, &dev);
+ if (rc)
+ goto dev_fail;
+
+ /* configure transfer mode if the port has been reset */
+ if (ehc->i.flags & ATA_EHI_DID_RESET) {
+ rc = ata_set_mode(ap, &dev);
+ if (rc) {
+ down_xfermask = 1;
+ goto dev_fail;
+ }
+ }
+
+ goto out;
+
+ dev_fail:
+ switch (rc) {
+ case -ENODEV:
+ case -EINVAL:
+ ehc->tries[dev->devno] = 0;
+ break;
+ case -EIO:
+ sata_down_spd_limit(ap);
+ default:
+ ehc->tries[dev->devno]--;
+ if (down_xfermask &&
+ ata_down_xfermask_limit(dev, ehc->tries[dev->devno] == 1))
+ ehc->tries[dev->devno] = 0;
+ }
+
+ /* disable device if it has used up all its chances */
+ if (ata_dev_enabled(dev) && !ehc->tries[dev->devno])
+ ata_dev_disable(dev);
+
+ /* soft didn't work? be haaaaard */
+ if (ehc->i.flags & ATA_EHI_DID_RESET)
+ ehc->i.action |= ATA_EH_HARDRESET;
+ else
+ ehc->i.action |= ATA_EH_SOFTRESET;
+
+ if (ata_port_nr_enabled(ap)) {
+ ata_port_printk(ap, KERN_WARNING, "failed to recover some "
+ "devices, retrying in 5 secs\n");
+ ssleep(5);
+ } else {
+ /* no device left, repeat fast */
+ msleep(500);
+ }
+
+ goto retry;
+
+ out:
+ if (rc) {
+ for (i = 0; i < ATA_MAX_DEVICES; i++)
+ ata_dev_disable(&ap->device[i]);
+ }
+
+ DPRINTK("EXIT, rc=%d\n", rc);
+ return rc;
+}
+
+/**
+ * ata_eh_finish - finish up EH
+ * @ap: host port to finish EH for
+ *
+ * Recovery is complete. Clean up EH states and retry or finish
+ * failed qcs.
+ *
+ * LOCKING:
+ * None.
+ */
+static void ata_eh_finish(struct ata_port *ap)
+{
+ int tag;
+
+ /* retry or finish qcs */
+ for (tag = 0; tag < ATA_MAX_QUEUE; tag++) {
+ struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
+
+ if (!(qc->flags & ATA_QCFLAG_FAILED))
+ continue;
+
+ if (qc->err_mask) {
+ /* FIXME: Once EH migration is complete,
+ * generate sense data in this function,
+ * considering both err_mask and tf.
+ */
+ if (qc->err_mask & AC_ERR_INVALID)
+ ata_eh_qc_complete(qc);
+ else
+ ata_eh_qc_retry(qc);
+ } else {
+ if (qc->flags & ATA_QCFLAG_SENSE_VALID) {
+ ata_eh_qc_complete(qc);
+ } else {
+ /* feed zero TF to sense generation */
+ memset(&qc->result_tf, 0, sizeof(qc->result_tf));
+ ata_eh_qc_retry(qc);
+ }
+ }
+ }
+}
+
+/**
+ * ata_do_eh - do standard error handling
+ * @ap: host port to handle error for
+ * @softreset: softreset method (can be NULL)
+ * @hardreset: hardreset method (can be NULL)
+ * @postreset: postreset method (can be NULL)
+ *
+ * Perform standard error handling sequence.
+ *
+ * LOCKING:
+ * Kernel thread context (may sleep).
+ */
+void ata_do_eh(struct ata_port *ap, ata_reset_fn_t softreset,
+ ata_reset_fn_t hardreset, ata_postreset_fn_t postreset)
+{
+ ata_eh_autopsy(ap);
+ ata_eh_report(ap);
+ ata_eh_recover(ap, softreset, hardreset, postreset);
+ ata_eh_finish(ap);
+}
diff --git a/drivers/scsi/libata-scsi.c b/drivers/scsi/libata-scsi.c
index 9871f8272df..e61cc357ae4 100644
--- a/drivers/scsi/libata-scsi.c
+++ b/drivers/scsi/libata-scsi.c
@@ -302,7 +302,6 @@ int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
/**
* ata_scsi_qc_new - acquire new ata_queued_cmd reference
- * @ap: ATA port to which the new command is attached
* @dev: ATA device to which the new command is attached
* @cmd: SCSI command that originated this ATA command
* @done: SCSI command completion function
@@ -321,14 +320,13 @@ int ata_scsi_ioctl(struct scsi_device *scsidev, int cmd, void __user *arg)
* RETURNS:
* Command allocated, or %NULL if none available.
*/
-struct ata_queued_cmd *ata_scsi_qc_new(struct ata_port *ap,
- struct ata_device *dev,
+struct ata_queued_cmd *ata_scsi_qc_new(struct ata_device *dev,
struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
struct ata_queued_cmd *qc;
- qc = ata_qc_new_init(ap, dev);
+ qc = ata_qc_new_init(dev);
if (qc) {
qc->scsicmd = cmd;
qc->scsidone = done;
@@ -398,7 +396,7 @@ int ata_scsi_device_resume(struct scsi_device *sdev)
struct ata_port *ap = ata_shost_to_port(sdev->host);
struct ata_device *dev = &ap->device[sdev->id];
- return ata_device_resume(ap, dev);
+ return ata_device_resume(dev);
}
int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state)
@@ -406,7 +404,7 @@ int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state)
struct ata_port *ap = ata_shost_to_port(sdev->host);
struct ata_device *dev = &ap->device[sdev->id];
- return ata_device_suspend(ap, dev, state);
+ return ata_device_suspend(dev, state);
}
/**
@@ -417,6 +415,7 @@ int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state)
* @sk: the sense key we'll fill out
* @asc: the additional sense code we'll fill out
* @ascq: the additional sense code qualifier we'll fill out
+ * @verbose: be verbose
*
* Converts an ATA error into a SCSI error. Fill out pointers to
* SK, ASC, and ASCQ bytes for later use in fixed or descriptor
@@ -426,7 +425,7 @@ int ata_scsi_device_suspend(struct scsi_device *sdev, pm_message_t state)
* spin_lock_irqsave(host_set lock)
*/
void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
- u8 *ascq)
+ u8 *ascq, int verbose)
{
int i;
@@ -491,8 +490,9 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
}
}
/* No immediate match */
- printk(KERN_WARNING "ata%u: no sense translation for "
- "error 0x%02x\n", id, drv_err);
+ if (verbose)
+ printk(KERN_WARNING "ata%u: no sense translation for "
+ "error 0x%02x\n", id, drv_err);
}
/* Fall back to interpreting status bits */
@@ -505,8 +505,9 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
}
}
/* No error? Undecoded? */
- printk(KERN_WARNING "ata%u: no sense translation for status: 0x%02x\n",
- id, drv_stat);
+ if (verbose)
+ printk(KERN_WARNING "ata%u: no sense translation for "
+ "status: 0x%02x\n", id, drv_stat);
/* We need a sensible error return here, which is tricky, and one
that won't cause people to do things like return a disk wrongly */
@@ -515,9 +516,10 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
*ascq = 0x00;
translate_done:
- printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x to "
- "SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n", id, drv_stat, drv_err,
- *sk, *asc, *ascq);
+ if (verbose)
+ printk(KERN_ERR "ata%u: translated ATA stat/err 0x%02x/%02x "
+ "to SCSI SK/ASC/ASCQ 0x%x/%02x/%02x\n",
+ id, drv_stat, drv_err, *sk, *asc, *ascq);
return;
}
@@ -537,9 +539,10 @@ void ata_to_sense_error(unsigned id, u8 drv_stat, u8 drv_err, u8 *sk, u8 *asc,
void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc)
{
struct scsi_cmnd *cmd = qc->scsicmd;
- struct ata_taskfile *tf = &qc->tf;
+ struct ata_taskfile *tf = &qc->result_tf;
unsigned char *sb = cmd->sense_buffer;
unsigned char *desc = sb + 8;
+ int verbose = qc->ap->ops->error_handler == NULL;
memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
@@ -552,7 +555,7 @@ void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc)
if (qc->err_mask ||
tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
- &sb[1], &sb[2], &sb[3]);
+ &sb[1], &sb[2], &sb[3], verbose);
sb[1] &= 0x0f;
}
@@ -608,8 +611,9 @@ void ata_gen_ata_desc_sense(struct ata_queued_cmd *qc)
void ata_gen_fixed_sense(struct ata_queued_cmd *qc)
{
struct scsi_cmnd *cmd = qc->scsicmd;
- struct ata_taskfile *tf = &qc->tf;
+ struct ata_taskfile *tf = &qc->result_tf;
unsigned char *sb = cmd->sense_buffer;
+ int verbose = qc->ap->ops->error_handler == NULL;
memset(sb, 0, SCSI_SENSE_BUFFERSIZE);
@@ -622,7 +626,7 @@ void ata_gen_fixed_sense(struct ata_queued_cmd *qc)
if (qc->err_mask ||
tf->command & (ATA_BUSY | ATA_DF | ATA_ERR | ATA_DRQ)) {
ata_to_sense_error(qc->ap->id, tf->command, tf->feature,
- &sb[2], &sb[12], &sb[13]);
+ &sb[2], &sb[12], &sb[13], verbose);
sb[2] &= 0x0f;
}
@@ -748,7 +752,7 @@ static unsigned int ata_scsi_start_stop_xlat(struct ata_queued_cmd *qc,
tf->nsect = 1; /* 1 sector, lba=0 */
if (qc->dev->flags & ATA_DFLAG_LBA) {
- qc->tf.flags |= ATA_TFLAG_LBA;
+ tf->flags |= ATA_TFLAG_LBA;
tf->lbah = 0x0;
tf->lbam = 0x0;
@@ -1199,14 +1203,11 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
*/
if (((cdb[0] == ATA_16) || (cdb[0] == ATA_12)) &&
((cdb[2] & 0x20) || need_sense)) {
- qc->ap->ops->tf_read(qc->ap, &qc->tf);
ata_gen_ata_desc_sense(qc);
} else {
if (!need_sense) {
cmd->result = SAM_STAT_GOOD;
} else {
- qc->ap->ops->tf_read(qc->ap, &qc->tf);
-
/* TODO: decide which descriptor format to use
* for 48b LBA devices and call that here
* instead of the fixed desc, which is only
@@ -1217,10 +1218,8 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
}
}
- if (need_sense) {
- /* The ata_gen_..._sense routines fill in tf */
- ata_dump_status(qc->ap->id, &qc->tf);
- }
+ if (need_sense && !qc->ap->ops->error_handler)
+ ata_dump_status(qc->ap->id, &qc->result_tf);
qc->scsidone(cmd);
@@ -1229,7 +1228,6 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
/**
* ata_scsi_translate - Translate then issue SCSI command to ATA device
- * @ap: ATA port to which the command is addressed
* @dev: ATA device to which the command is addressed
* @cmd: SCSI command to execute
* @done: SCSI command completion function
@@ -1252,17 +1250,16 @@ static void ata_scsi_qc_complete(struct ata_queued_cmd *qc)
* spin_lock_irqsave(host_set lock)
*/
-static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev,
- struct scsi_cmnd *cmd,
- void (*done)(struct scsi_cmnd *),
- ata_xlat_func_t xlat_func)
+static void ata_scsi_translate(struct ata_device *dev, struct scsi_cmnd *cmd,
+ void (*done)(struct scsi_cmnd *),
+ ata_xlat_func_t xlat_func)
{
struct ata_queued_cmd *qc;
u8 *scsicmd = cmd->cmnd;
VPRINTK("ENTER\n");
- qc = ata_scsi_qc_new(ap, dev, cmd, done);
+ qc = ata_scsi_qc_new(dev, cmd, done);
if (!qc)
goto err_mem;
@@ -1270,8 +1267,8 @@ static void ata_scsi_translate(struct ata_port *ap, struct ata_device *dev,
if (cmd->sc_data_direction == DMA_FROM_DEVICE ||
cmd->sc_data_direction == DMA_TO_DEVICE) {
if (unlikely(cmd->request_bufflen < 1)) {
- printk(KERN_WARNING "ata%u(%u): WARNING: zero len r/w req\n",
- ap->id, dev->devno);
+ ata_dev_printk(dev, KERN_WARNING,
+ "WARNING: zero len r/w req\n");
goto err_did;
}
@@ -2004,7 +2001,6 @@ static void atapi_sense_complete(struct ata_queued_cmd *qc)
* a sense descriptors, since that's only
* correct for ATA, not ATAPI
*/
- qc->ap->ops->tf_read(qc->ap, &qc->tf);
ata_gen_ata_desc_sense(qc);
}
@@ -2070,6 +2066,26 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
VPRINTK("ENTER, err_mask 0x%X\n", err_mask);
+ /* handle completion from new EH */
+ if (unlikely(qc->ap->ops->error_handler &&
+ (err_mask || qc->flags & ATA_QCFLAG_SENSE_VALID))) {
+
+ if (!(qc->flags & ATA_QCFLAG_SENSE_VALID)) {
+ /* FIXME: not quite right; we don't want the
+ * translation of taskfile registers into a
+ * sense descriptors, since that's only
+ * correct for ATA, not ATAPI
+ */
+ ata_gen_ata_desc_sense(qc);
+ }
+
+ qc->scsicmd->result = SAM_STAT_CHECK_CONDITION;
+ qc->scsidone(cmd);
+ ata_qc_free(qc);
+ return;
+ }
+
+ /* successful completion or old EH failure path */
if (unlikely(err_mask & AC_ERR_DEV)) {
cmd->result = SAM_STAT_CHECK_CONDITION;
atapi_request_sense(qc);
@@ -2080,7 +2096,6 @@ static void atapi_qc_complete(struct ata_queued_cmd *qc)
* a sense descriptors, since that's only
* correct for ATA, not ATAPI
*/
- qc->ap->ops->tf_read(qc->ap, &qc->tf);
ata_gen_ata_desc_sense(qc);
} else {
u8 *scsicmd = cmd->cmnd;
@@ -2211,8 +2226,9 @@ ata_scsi_find_dev(struct ata_port *ap, const struct scsi_device *scsidev)
if (!atapi_enabled || (ap->flags & ATA_FLAG_NO_ATAPI)) {
if (unlikely(dev->class == ATA_DEV_ATAPI)) {
- printk(KERN_WARNING "ata%u(%u): WARNING: ATAPI is %s, device ignored.\n",
- ap->id, dev->devno, atapi_enabled ? "not supported with this driver" : "disabled");
+ ata_dev_printk(dev, KERN_WARNING,
+ "WARNING: ATAPI is %s, device ignored.\n",
+ atapi_enabled ? "not supported with this driver" : "disabled");
return NULL;
}
}
@@ -2361,6 +2377,9 @@ ata_scsi_pass_thru(struct ata_queued_cmd *qc, const u8 *scsicmd)
*/
qc->nsect = cmd->bufflen / ATA_SECT_SIZE;
+ /* request result TF */
+ qc->flags |= ATA_QCFLAG_RESULT_TF;
+
return 0;
invalid_fld:
@@ -2437,19 +2456,20 @@ static inline void ata_scsi_dump_cdb(struct ata_port *ap,
#endif
}
-static inline void __ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *),
- struct ata_port *ap, struct ata_device *dev)
+static inline void __ata_scsi_queuecmd(struct scsi_cmnd *cmd,
+ void (*done)(struct scsi_cmnd *),
+ struct ata_device *dev)
{
if (dev->class == ATA_DEV_ATA) {
ata_xlat_func_t xlat_func = ata_get_xlat_func(dev,
cmd->cmnd[0]);
if (xlat_func)
- ata_scsi_translate(ap, dev, cmd, done, xlat_func);
+ ata_scsi_translate(dev, cmd, done, xlat_func);
else
- ata_scsi_simulate(ap, dev, cmd, done);
+ ata_scsi_simulate(dev, cmd, done);
} else
- ata_scsi_translate(ap, dev, cmd, done, atapi_xlat);
+ ata_scsi_translate(dev, cmd, done, atapi_xlat);
}
/**
@@ -2487,7 +2507,7 @@ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
dev = ata_scsi_find_dev(ap, scsidev);
if (likely(dev))
- __ata_scsi_queuecmd(cmd, done, ap, dev);
+ __ata_scsi_queuecmd(cmd, done, dev);
else {
cmd->result = (DID_BAD_TARGET << 16);
done(cmd);
@@ -2500,7 +2520,6 @@ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
/**
* ata_scsi_simulate - simulate SCSI command on ATA device
- * @ap: port the device is connected to
* @dev: the target device
* @cmd: SCSI command being sent to device.
* @done: SCSI command completion function.
@@ -2512,14 +2531,12 @@ int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *))
* spin_lock_irqsave(host_set lock)
*/
-void ata_scsi_simulate(struct ata_port *ap, struct ata_device *dev,
- struct scsi_cmnd *cmd,
+void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *))
{
struct ata_scsi_args args;
const u8 *scsicmd = cmd->cmnd;
- args.ap = ap;
args.dev = dev;
args.id = dev->id;
args.cmd = cmd;
@@ -2605,3 +2622,26 @@ void ata_scsi_scan_host(struct ata_port *ap)
}
}
+/**
+ * ata_schedule_scsi_eh - schedule EH for SCSI host
+ * @shost: SCSI host to invoke error handling on.
+ *
+ * Schedule SCSI EH without scmd. This is a hack.
+ *
+ * LOCKING:
+ * spin_lock_irqsave(host_set lock)
+ **/
+void ata_schedule_scsi_eh(struct Scsi_Host *shost)
+{
+ unsigned long flags;
+
+ spin_lock_irqsave(shost->host_lock, flags);
+
+ if (scsi_host_set_state(shost, SHOST_RECOVERY) == 0 ||
+ scsi_host_set_state(shost, SHOST_CANCEL_RECOVERY) == 0) {
+ shost->host_eh_scheduled++;
+ scsi_eh_wakeup(shost);
+ }
+
+ spin_unlock_irqrestore(shost->host_lock, flags);
+}
diff --git a/drivers/scsi/libata.h b/drivers/scsi/libata.h
index 3f8b0a86378..b76ad7d7062 100644
--- a/drivers/scsi/libata.h
+++ b/drivers/scsi/libata.h
@@ -32,7 +32,6 @@
#define DRV_VERSION "1.30" /* must be exactly four chars */
struct ata_scsi_args {
- struct ata_port *ap;
struct ata_device *dev;
u16 *id;
struct scsi_cmnd *cmd;
@@ -43,23 +42,22 @@ struct ata_scsi_args {
extern int atapi_enabled;
extern int atapi_dmadir;
extern int libata_fua;
-extern struct ata_queued_cmd *ata_qc_new_init(struct ata_port *ap,
- struct ata_device *dev);
+extern struct ata_queued_cmd *ata_qc_new_init(struct ata_device *dev);
extern int ata_rwcmd_protocol(struct ata_queued_cmd *qc);
-extern void ata_dev_disable(struct ata_port *ap, struct ata_device *dev);
+extern void ata_dev_disable(struct ata_device *dev);
extern void ata_port_flush_task(struct ata_port *ap);
-extern unsigned ata_exec_internal(struct ata_port *ap, struct ata_device *dev,
+extern unsigned ata_exec_internal(struct ata_device *dev,
struct ata_taskfile *tf, const u8 *cdb,
int dma_dir, void *buf, unsigned int buflen);
-extern int ata_down_sata_spd_limit(struct ata_port *ap);
-extern int ata_set_sata_spd_needed(struct ata_port *ap);
-extern int ata_down_xfermask_limit(struct ata_port *ap, struct ata_device *dev,
- int force_pio0);
+extern int sata_down_spd_limit(struct ata_port *ap);
+extern int sata_set_spd_needed(struct ata_port *ap);
+extern int ata_down_xfermask_limit(struct ata_device *dev, int force_pio0);
extern int ata_set_mode(struct ata_port *ap, struct ata_device **r_failed_dev);
extern int ata_do_reset(struct ata_port *ap, ata_reset_fn_t reset,
- ata_postreset_fn_t postreset, unsigned int *classes);
+ unsigned int *classes);
extern void ata_qc_free(struct ata_queued_cmd *qc);
extern void ata_qc_issue(struct ata_queued_cmd *qc);
+extern void __ata_qc_complete(struct ata_queued_cmd *qc);
extern int ata_check_atapi_dma(struct ata_queued_cmd *qc);
extern void ata_dev_select(struct ata_port *ap, unsigned int device,
unsigned int wait, unsigned int can_sleep);
@@ -100,9 +98,11 @@ extern void ata_scsi_set_sense(struct scsi_cmnd *cmd,
extern void ata_scsi_rbuf_fill(struct ata_scsi_args *args,
unsigned int (*actor) (struct ata_scsi_args *args,
u8 *rbuf, unsigned int buflen));
+extern void ata_schedule_scsi_eh(struct Scsi_Host *shost);
/* libata-eh.c */
extern enum scsi_eh_timer_return ata_scsi_timed_out(struct scsi_cmnd *cmd);
extern void ata_scsi_error(struct Scsi_Host *host);
+extern void ata_qc_schedule_eh(struct ata_queued_cmd *qc);
#endif /* __LIBATA_H__ */
diff --git a/drivers/scsi/sata_mv.c b/drivers/scsi/sata_mv.c
index 670ef16a843..e6d141dd038 100644
--- a/drivers/scsi/sata_mv.c
+++ b/drivers/scsi/sata_mv.c
@@ -680,7 +680,7 @@ static void mv_stop_dma(struct ata_port *ap)
}
if (EDMA_EN & reg) {
- printk(KERN_ERR "ata%u: Unable to stop eDMA\n", ap->id);
+ ata_port_printk(ap, KERN_ERR, "Unable to stop eDMA\n");
/* FIXME: Consider doing a reset here to recover */
}
}
@@ -1309,8 +1309,8 @@ static void mv_err_intr(struct ata_port *ap)
edma_err_cause = readl(port_mmio + EDMA_ERR_IRQ_CAUSE_OFS);
if (EDMA_ERR_SERR & edma_err_cause) {
- serr = scr_read(ap, SCR_ERROR);
- scr_write_flush(ap, SCR_ERROR, serr);
+ sata_scr_read(ap, SCR_ERROR, &serr);
+ sata_scr_write_flush(ap, SCR_ERROR, serr);
}
if (EDMA_ERR_SELF_DIS & edma_err_cause) {
struct mv_port_priv *pp = ap->private_data;
@@ -1934,15 +1934,16 @@ static void __mv_phy_reset(struct ata_port *ap, int can_sleep)
/* Issue COMRESET via SControl */
comreset_retry:
- scr_write_flush(ap, SCR_CONTROL, 0x301);
+ sata_scr_write_flush(ap, SCR_CONTROL, 0x301);
__msleep(1, can_sleep);
- scr_write_flush(ap, SCR_CONTROL, 0x300);
+ sata_scr_write_flush(ap, SCR_CONTROL, 0x300);
__msleep(20, can_sleep);
timeout = jiffies + msecs_to_jiffies(200);
do {
- sstatus = scr_read(ap, SCR_STATUS) & 0x3;
+ sata_scr_read(ap, SCR_STATUS, &sstatus);
+ sstatus &= 0x3;
if ((sstatus == 3) || (sstatus == 0))
break;
@@ -1959,11 +1960,12 @@ comreset_retry:
"SCtrl 0x%08x\n", mv_scr_read(ap, SCR_STATUS),
mv_scr_read(ap, SCR_ERROR), mv_scr_read(ap, SCR_CONTROL));
- if (sata_dev_present(ap)) {
+ if (ata_port_online(ap)) {
ata_port_probe(ap);
} else {
- printk(KERN_INFO "ata%u: no device found (phy stat %08x)\n",
- ap->id, scr_read(ap, SCR_STATUS));
+ sata_scr_read(ap, SCR_STATUS, &sstatus);
+ ata_port_printk(ap, KERN_INFO,
+ "no device found (phy stat %08x)\n", sstatus);
ata_port_disable(ap);
return;
}
@@ -2021,7 +2023,7 @@ static void mv_eng_timeout(struct ata_port *ap)
{
struct ata_queued_cmd *qc;
- printk(KERN_ERR "ata%u: Entering mv_eng_timeout\n",ap->id);
+ ata_port_printk(ap, KERN_ERR, "Entering mv_eng_timeout\n");
DPRINTK("All regs @ start of eng_timeout\n");
mv_dump_all_regs(ap->host_set->mmio_base, ap->port_no,
to_pci_dev(ap->host_set->dev));
diff --git a/drivers/scsi/sata_promise.c b/drivers/scsi/sata_promise.c
index aaf896a0c63..bb000438cb6 100644
--- a/drivers/scsi/sata_promise.c
+++ b/drivers/scsi/sata_promise.c
@@ -436,7 +436,7 @@ static void pdc_eng_timeout(struct ata_port *ap)
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
- printk(KERN_ERR "ata%u: command timeout\n", ap->id);
+ ata_port_printk(ap, KERN_ERR, "command timeout\n");
drv_stat = ata_wait_idle(ap);
qc->err_mask |= __ac_err_mask(drv_stat);
break;
@@ -444,8 +444,9 @@ static void pdc_eng_timeout(struct ata_port *ap)
default:
drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
- printk(KERN_ERR "ata%u: unknown timeout, cmd 0x%x stat 0x%x\n",
- ap->id, qc->tf.command, drv_stat);
+ ata_port_printk(ap, KERN_ERR,
+ "unknown timeout, cmd 0x%x stat 0x%x\n",
+ qc->tf.command, drv_stat);
qc->err_mask |= ac_err_mask(drv_stat);
break;
diff --git a/drivers/scsi/sata_sil.c b/drivers/scsi/sata_sil.c
index c9333577330..aa63044eed2 100644
--- a/drivers/scsi/sata_sil.c
+++ b/drivers/scsi/sata_sil.c
@@ -96,6 +96,8 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev);
static u32 sil_scr_read (struct ata_port *ap, unsigned int sc_reg);
static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val);
static void sil_post_set_mode (struct ata_port *ap);
+static void sil_freeze(struct ata_port *ap);
+static void sil_thaw(struct ata_port *ap);
static const struct pci_device_id sil_pci_tbl[] = {
@@ -174,7 +176,10 @@ static const struct ata_port_operations sil_ops = {
.bmdma_status = ata_bmdma_status,
.qc_prep = ata_qc_prep,
.qc_issue = ata_qc_issue_prot,
- .eng_timeout = ata_eng_timeout,
+ .freeze = sil_freeze,
+ .thaw = sil_thaw,
+ .error_handler = ata_bmdma_error_handler,
+ .post_internal_cmd = ata_bmdma_post_internal_cmd,
.irq_handler = ata_interrupt,
.irq_clear = ata_bmdma_irq_clear,
.scr_read = sil_scr_read,
@@ -314,6 +319,33 @@ static void sil_scr_write (struct ata_port *ap, unsigned int sc_reg, u32 val)
writel(val, mmio);
}
+static void sil_freeze(struct ata_port *ap)
+{
+ void __iomem *mmio_base = ap->host_set->mmio_base;
+ u32 tmp;
+
+ /* plug IRQ */
+ tmp = readl(mmio_base + SIL_SYSCFG);
+ tmp |= SIL_MASK_IDE0_INT << ap->port_no;
+ writel(tmp, mmio_base + SIL_SYSCFG);
+ readl(mmio_base + SIL_SYSCFG); /* flush */
+}
+
+static void sil_thaw(struct ata_port *ap)
+{
+ void __iomem *mmio_base = ap->host_set->mmio_base;
+ u32 tmp;
+
+ /* clear IRQ */
+ ata_chk_status(ap);
+ ata_bmdma_irq_clear(ap);
+
+ /* turn on IRQ */
+ tmp = readl(mmio_base + SIL_SYSCFG);
+ tmp &= ~(SIL_MASK_IDE0_INT << ap->port_no);
+ writel(tmp, mmio_base + SIL_SYSCFG);
+}
+
/**
* sil_dev_config - Apply device/host-specific errata fixups
* @ap: Port containing device to be examined
@@ -360,16 +392,16 @@ static void sil_dev_config(struct ata_port *ap, struct ata_device *dev)
if (slow_down ||
((ap->flags & SIL_FLAG_MOD15WRITE) &&
(quirks & SIL_QUIRK_MOD15WRITE))) {
- printk(KERN_INFO "ata%u(%u): applying Seagate errata fix (mod15write workaround)\n",
- ap->id, dev->devno);
+ ata_dev_printk(dev, KERN_INFO, "applying Seagate errata fix "
+ "(mod15write workaround)\n");
dev->max_sectors = 15;
return;
}
/* limit to udma5 */
if (quirks & SIL_QUIRK_UDMA5MAX) {
- printk(KERN_INFO "ata%u(%u): applying Maxtor errata fix %s\n",
- ap->id, dev->devno, model_num);
+ ata_dev_printk(dev, KERN_INFO,
+ "applying Maxtor errata fix %s\n", model_num);
dev->udma_mask &= ATA_UDMA5;
return;
}
@@ -384,7 +416,7 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
int rc;
unsigned int i;
int pci_dev_busy = 0;
- u32 tmp, irq_mask;
+ u32 tmp;
u8 cls;
if (!printed_version++)
@@ -474,24 +506,11 @@ static int sil_init_one (struct pci_dev *pdev, const struct pci_device_id *ent)
}
if (ent->driver_data == sil_3114) {
- irq_mask = SIL_MASK_4PORT;
-
/* flip the magic "make 4 ports work" bit */
tmp = readl(mmio_base + sil_port[2].bmdma);
if ((tmp & SIL_INTR_STEERING) == 0)
writel(tmp | SIL_INTR_STEERING,
mmio_base + sil_port[2].bmdma);
-
- } else {
- irq_mask = SIL_MASK_2PORT;
- }
-
- /* make sure IDE0/1/2/3 interrupts are not masked */
- tmp = readl(mmio_base + SIL_SYSCFG);
- if (tmp & irq_mask) {
- tmp &= ~irq_mask;
- writel(tmp, mmio_base + SIL_SYSCFG);
- readl(mmio_base + SIL_SYSCFG); /* flush */
}
/* mask all SATA phy-related interrupts */
diff --git a/drivers/scsi/sata_sil24.c b/drivers/scsi/sata_sil24.c
index e9fd869140c..6e7728cfaf6 100644
--- a/drivers/scsi/sata_sil24.c
+++ b/drivers/scsi/sata_sil24.c
@@ -156,6 +156,9 @@ enum {
PORT_IRQ_HANDSHAKE = (1 << 10), /* handshake error threshold */
PORT_IRQ_SDB_NOTIFY = (1 << 11), /* SDB notify received */
+ DEF_PORT_IRQ = PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
+ PORT_IRQ_DEV_XCHG | PORT_IRQ_UNK_FIS,
+
/* bits[27:16] are unmasked (raw) */
PORT_IRQ_RAW_SHIFT = 16,
PORT_IRQ_MASKED_MASK = 0x7ff,
@@ -242,6 +245,58 @@ union sil24_cmd_block {
struct sil24_atapi_block atapi;
};
+static struct sil24_cerr_info {
+ unsigned int err_mask, action;
+ const char *desc;
+} sil24_cerr_db[] = {
+ [0] = { AC_ERR_DEV, ATA_EH_REVALIDATE,
+ "device error" },
+ [PORT_CERR_DEV] = { AC_ERR_DEV, ATA_EH_REVALIDATE,
+ "device error via D2H FIS" },
+ [PORT_CERR_SDB] = { AC_ERR_DEV, ATA_EH_REVALIDATE,
+ "device error via SDB FIS" },
+ [PORT_CERR_DATA] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
+ "error in data FIS" },
+ [PORT_CERR_SEND] = { AC_ERR_ATA_BUS, ATA_EH_SOFTRESET,
+ "failed to transmit command FIS" },
+ [PORT_CERR_INCONSISTENT] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
+ "protocol mismatch" },
+ [PORT_CERR_DIRECTION] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
+ "data directon mismatch" },
+ [PORT_CERR_UNDERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
+ "ran out of SGEs while writing" },
+ [PORT_CERR_OVERRUN] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
+ "ran out of SGEs while reading" },
+ [PORT_CERR_PKT_PROT] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
+ "invalid data directon for ATAPI CDB" },
+ [PORT_CERR_SGT_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET,
+ "SGT no on qword boundary" },
+ [PORT_CERR_SGT_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ "PCI target abort while fetching SGT" },
+ [PORT_CERR_SGT_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ "PCI master abort while fetching SGT" },
+ [PORT_CERR_SGT_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ "PCI parity error while fetching SGT" },
+ [PORT_CERR_CMD_BOUNDARY] = { AC_ERR_SYSTEM, ATA_EH_SOFTRESET,
+ "PRB not on qword boundary" },
+ [PORT_CERR_CMD_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ "PCI target abort while fetching PRB" },
+ [PORT_CERR_CMD_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ "PCI master abort while fetching PRB" },
+ [PORT_CERR_CMD_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ "PCI parity error while fetching PRB" },
+ [PORT_CERR_XFR_UNDEF] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ "undefined error while transferring data" },
+ [PORT_CERR_XFR_TGTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ "PCI target abort while transferring data" },
+ [PORT_CERR_XFR_MSTABRT] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ "PCI master abort while transferring data" },
+ [PORT_CERR_XFR_PCIPERR] = { AC_ERR_HOST_BUS, ATA_EH_SOFTRESET,
+ "PCI parity error while transferring data" },
+ [PORT_CERR_SENDSERVICE] = { AC_ERR_HSM, ATA_EH_SOFTRESET,
+ "FIS received while sending service FIS" },
+};
+
/*
* ap->private_data
*
@@ -269,8 +324,11 @@ static int sil24_probe_reset(struct ata_port *ap, unsigned int *classes);
static void sil24_qc_prep(struct ata_queued_cmd *qc);
static unsigned int sil24_qc_issue(struct ata_queued_cmd *qc);
static void sil24_irq_clear(struct ata_port *ap);
-static void sil24_eng_timeout(struct ata_port *ap);
static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs);
+static void sil24_freeze(struct ata_port *ap);
+static void sil24_thaw(struct ata_port *ap);
+static void sil24_error_handler(struct ata_port *ap);
+static void sil24_post_internal_cmd(struct ata_queued_cmd *qc);
static int sil24_port_start(struct ata_port *ap);
static void sil24_port_stop(struct ata_port *ap);
static void sil24_host_stop(struct ata_host_set *host_set);
@@ -325,14 +383,17 @@ static const struct ata_port_operations sil24_ops = {
.qc_prep = sil24_qc_prep,
.qc_issue = sil24_qc_issue,
- .eng_timeout = sil24_eng_timeout,
-
.irq_handler = sil24_interrupt,
.irq_clear = sil24_irq_clear,
.scr_read = sil24_scr_read,
.scr_write = sil24_scr_write,
+ .freeze = sil24_freeze,
+ .thaw = sil24_thaw,
+ .error_handler = sil24_error_handler,
+ .post_internal_cmd = sil24_post_internal_cmd,
+
.port_start = sil24_port_start,
.port_stop = sil24_port_stop,
.host_stop = sil24_host_stop,
@@ -459,21 +520,17 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class)
struct sil24_port_priv *pp = ap->private_data;
struct sil24_prb *prb = &pp->cmd_block[0].ata.prb;
dma_addr_t paddr = pp->cmd_block_dma;
- u32 mask, irq_enable, irq_stat;
+ u32 mask, irq_stat;
const char *reason;
DPRINTK("ENTER\n");
- if (!sata_dev_present(ap)) {
+ if (ata_port_offline(ap)) {
DPRINTK("PHY reports no device\n");
*class = ATA_DEV_NONE;
goto out;
}
- /* temporarily turn off IRQs during SRST */
- irq_enable = readl(port + PORT_IRQ_ENABLE_SET);
- writel(irq_enable, port + PORT_IRQ_ENABLE_CLR);
-
/* put the port into known state */
if (sil24_init_port(ap)) {
reason ="port not ready";
@@ -494,9 +551,6 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class)
writel(irq_stat, port + PORT_IRQ_STAT); /* clear IRQs */
irq_stat >>= PORT_IRQ_RAW_SHIFT;
- /* restore IRQs */
- writel(irq_enable, port + PORT_IRQ_ENABLE_SET);
-
if (!(irq_stat & PORT_IRQ_COMPLETE)) {
if (irq_stat & PORT_IRQ_ERROR)
reason = "SRST command error";
@@ -516,7 +570,7 @@ static int sil24_softreset(struct ata_port *ap, unsigned int *class)
return 0;
err:
- printk(KERN_ERR "ata%u: softreset failed (%s)\n", ap->id, reason);
+ ata_port_printk(ap, KERN_ERR, "softreset failed (%s)\n", reason);
return -EIO;
}
@@ -528,10 +582,10 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class)
u32 tmp;
/* sil24 does the right thing(tm) without any protection */
- ata_set_sata_spd(ap);
+ sata_set_spd(ap);
tout_msec = 100;
- if (sata_dev_present(ap))
+ if (ata_port_online(ap))
tout_msec = 5000;
writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
@@ -544,7 +598,7 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class)
msleep(100);
if (tmp & PORT_CS_DEV_RST) {
- if (!sata_dev_present(ap))
+ if (ata_port_offline(ap))
return 0;
reason = "link not ready";
goto err;
@@ -561,7 +615,7 @@ static int sil24_hardreset(struct ata_port *ap, unsigned int *class)
return 0;
err:
- printk(KERN_ERR "ata%u: hardreset failed (%s)\n", ap->id, reason);
+ ata_port_printk(ap, KERN_ERR, "hardreset failed (%s)\n", reason);
return -EIO;
}
@@ -655,166 +709,134 @@ static void sil24_irq_clear(struct ata_port *ap)
/* unused */
}
-static int __sil24_restart_controller(void __iomem *port)
+static void sil24_freeze(struct ata_port *ap)
{
- u32 tmp;
- int cnt;
-
- writel(PORT_CS_INIT, port + PORT_CTRL_STAT);
-
- /* Max ~10ms */
- for (cnt = 0; cnt < 10000; cnt++) {
- tmp = readl(port + PORT_CTRL_STAT);
- if (tmp & PORT_CS_RDY)
- return 0;
- udelay(1);
- }
-
- return -1;
-}
+ void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
-static void sil24_restart_controller(struct ata_port *ap)
-{
- if (__sil24_restart_controller((void __iomem *)ap->ioaddr.cmd_addr))
- printk(KERN_ERR DRV_NAME
- " ata%u: failed to restart controller\n", ap->id);
+ /* Port-wide IRQ mask in HOST_CTRL doesn't really work, clear
+ * PORT_IRQ_ENABLE instead.
+ */
+ writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
}
-static int __sil24_reset_controller(void __iomem *port)
+static void sil24_thaw(struct ata_port *ap)
{
- int cnt;
+ void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
u32 tmp;
- /* Reset controller state. Is this correct? */
- writel(PORT_CS_DEV_RST, port + PORT_CTRL_STAT);
- readl(port + PORT_CTRL_STAT); /* sync */
+ /* clear IRQ */
+ tmp = readl(port + PORT_IRQ_STAT);
+ writel(tmp, port + PORT_IRQ_STAT);
- /* Max ~100ms */
- for (cnt = 0; cnt < 1000; cnt++) {
- udelay(100);
- tmp = readl(port + PORT_CTRL_STAT);
- if (!(tmp & PORT_CS_DEV_RST))
- break;
- }
-
- if (tmp & PORT_CS_DEV_RST)
- return -1;
-
- if (tmp & PORT_CS_RDY)
- return 0;
-
- return __sil24_restart_controller(port);
-}
-
-static void sil24_reset_controller(struct ata_port *ap)
-{
- printk(KERN_NOTICE DRV_NAME
- " ata%u: resetting controller...\n", ap->id);
- if (__sil24_reset_controller((void __iomem *)ap->ioaddr.cmd_addr))
- printk(KERN_ERR DRV_NAME
- " ata%u: failed to reset controller\n", ap->id);
-}
-
-static void sil24_eng_timeout(struct ata_port *ap)
-{
- struct ata_queued_cmd *qc;
-
- qc = ata_qc_from_tag(ap, ap->active_tag);
-
- printk(KERN_ERR "ata%u: command timeout\n", ap->id);
- qc->err_mask |= AC_ERR_TIMEOUT;
- ata_eh_qc_complete(qc);
-
- sil24_reset_controller(ap);
+ /* turn IRQ back on */
+ writel(DEF_PORT_IRQ, port + PORT_IRQ_ENABLE_SET);
}
-static void sil24_error_intr(struct ata_port *ap, u32 slot_stat)
+static void sil24_error_intr(struct ata_port *ap)
{
- struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
- struct sil24_port_priv *pp = ap->private_data;
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
- u32 irq_stat, cmd_err, sstatus, serror;
- unsigned int err_mask;
+ struct ata_eh_info *ehi = &ap->eh_info;
+ int freeze = 0;
+ u32 irq_stat;
+ /* on error, we need to clear IRQ explicitly */
irq_stat = readl(port + PORT_IRQ_STAT);
- writel(irq_stat, port + PORT_IRQ_STAT); /* clear irq */
+ writel(irq_stat, port + PORT_IRQ_STAT);
- if (!(irq_stat & PORT_IRQ_ERROR)) {
- /* ignore non-completion, non-error irqs for now */
- printk(KERN_WARNING DRV_NAME
- "ata%u: non-error exception irq (irq_stat %x)\n",
- ap->id, irq_stat);
- return;
- }
+ /* first, analyze and record host port events */
+ ata_ehi_clear_desc(ehi);
- cmd_err = readl(port + PORT_CMD_ERR);
- sstatus = readl(port + PORT_SSTATUS);
- serror = readl(port + PORT_SERROR);
- if (serror)
- writel(serror, port + PORT_SERROR);
+ ata_ehi_push_desc(ehi, "irq_stat 0x%08x", irq_stat);
- /*
- * Don't log ATAPI device errors. They're supposed to happen
- * and any serious errors will be logged using sense data by
- * the SCSI layer.
- */
- if (ap->device[0].class != ATA_DEV_ATAPI || cmd_err > PORT_CERR_SDB)
- printk("ata%u: error interrupt on port%d\n"
- " stat=0x%x irq=0x%x cmd_err=%d sstatus=0x%x serror=0x%x\n",
- ap->id, ap->port_no, slot_stat, irq_stat, cmd_err, sstatus, serror);
-
- if (cmd_err == PORT_CERR_DEV || cmd_err == PORT_CERR_SDB) {
- /*
- * Device is reporting error, tf registers are valid.
- */
- sil24_update_tf(ap);
- err_mask = ac_err_mask(pp->tf.command);
- sil24_restart_controller(ap);
- } else {
- /*
- * Other errors. libata currently doesn't have any
- * mechanism to report these errors. Just turn on
- * ATA_ERR.
+ if (irq_stat & PORT_IRQ_DEV_XCHG) {
+ ehi->err_mask |= AC_ERR_ATA_BUS;
+ /* sil24 doesn't recover very well from phy
+ * disconnection with a softreset. Force hardreset.
*/
- err_mask = AC_ERR_OTHER;
- sil24_reset_controller(ap);
+ ehi->action |= ATA_EH_HARDRESET;
+ ata_ehi_push_desc(ehi, ", device_exchanged");
+ freeze = 1;
}
- if (qc) {
- qc->err_mask |= err_mask;
- ata_qc_complete(qc);
+ if (irq_stat & PORT_IRQ_UNK_FIS) {
+ ehi->err_mask |= AC_ERR_HSM;
+ ehi->action |= ATA_EH_SOFTRESET;
+ ata_ehi_push_desc(ehi , ", unknown FIS");
+ freeze = 1;
}
+
+ /* deal with command error */
+ if (irq_stat & PORT_IRQ_ERROR) {
+ struct sil24_cerr_info *ci = NULL;
+ unsigned int err_mask = 0, action = 0;
+ struct ata_queued_cmd *qc;
+ u32 cerr;
+
+ /* analyze CMD_ERR */
+ cerr = readl(port + PORT_CMD_ERR);
+ if (cerr < ARRAY_SIZE(sil24_cerr_db))
+ ci = &sil24_cerr_db[cerr];
+
+ if (ci && ci->desc) {
+ err_mask |= ci->err_mask;
+ action |= ci->action;
+ ata_ehi_push_desc(ehi, ", %s", ci->desc);
+ } else {
+ err_mask |= AC_ERR_OTHER;
+ action |= ATA_EH_SOFTRESET;
+ ata_ehi_push_desc(ehi, ", unknown command error %d",
+ cerr);
+ }
+
+ /* record error info */
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc) {
+ int tag = qc->tag;
+ if (unlikely(ata_tag_internal(tag)))
+ tag = 0;
+ sil24_update_tf(ap);
+ qc->err_mask |= err_mask;
+ } else
+ ehi->err_mask |= err_mask;
+
+ ehi->action |= action;
+ }
+
+ /* freeze or abort */
+ if (freeze)
+ ata_port_freeze(ap);
+ else
+ ata_port_abort(ap);
}
static inline void sil24_host_intr(struct ata_port *ap)
{
- struct ata_queued_cmd *qc = ata_qc_from_tag(ap, ap->active_tag);
void __iomem *port = (void __iomem *)ap->ioaddr.cmd_addr;
+ struct ata_queued_cmd *qc;
u32 slot_stat;
slot_stat = readl(port + PORT_SLOT_STAT);
- if (!(slot_stat & HOST_SSTAT_ATTN)) {
- struct sil24_port_priv *pp = ap->private_data;
-
- if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
- writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
-
- /*
- * !HOST_SSAT_ATTN guarantees successful completion,
- * so reading back tf registers is unnecessary for
- * most commands. TODO: read tf registers for
- * commands which require these values on successful
- * completion (EXECUTE DEVICE DIAGNOSTIC, CHECK POWER,
- * DEVICE RESET and READ PORT MULTIPLIER (any more?).
- */
- sil24_update_tf(ap);
- if (qc) {
- qc->err_mask |= ac_err_mask(pp->tf.command);
- ata_qc_complete(qc);
- }
- } else
- sil24_error_intr(ap, slot_stat);
+ if (unlikely(slot_stat & HOST_SSTAT_ATTN)) {
+ sil24_error_intr(ap);
+ return;
+ }
+
+ if (ap->flags & SIL24_FLAG_PCIX_IRQ_WOC)
+ writel(PORT_IRQ_COMPLETE, port + PORT_IRQ_STAT);
+
+ qc = ata_qc_from_tag(ap, ap->active_tag);
+ if (qc) {
+ if (qc->flags & ATA_QCFLAG_RESULT_TF)
+ sil24_update_tf(ap);
+ ata_qc_complete(qc);
+ return;
+ }
+
+ if (ata_ratelimit())
+ ata_port_printk(ap, KERN_INFO, "spurious interrupt "
+ "(slot_stat 0x%x active_tag %d)\n",
+ slot_stat, ap->active_tag);
}
static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *regs)
@@ -854,6 +876,31 @@ static irqreturn_t sil24_interrupt(int irq, void *dev_instance, struct pt_regs *
return IRQ_RETVAL(handled);
}
+static void sil24_error_handler(struct ata_port *ap)
+{
+ struct ata_eh_context *ehc = &ap->eh_context;
+
+ if (sil24_init_port(ap)) {
+ ata_eh_freeze_port(ap);
+ ehc->i.action |= ATA_EH_HARDRESET;
+ }
+
+ /* perform recovery */
+ ata_do_eh(ap, sil24_softreset, sil24_hardreset, ata_std_postreset);
+}
+
+static void sil24_post_internal_cmd(struct ata_queued_cmd *qc)
+{
+ struct ata_port *ap = qc->ap;
+
+ if (qc->flags & ATA_QCFLAG_FAILED)
+ qc->err_mask |= AC_ERR_OTHER;
+
+ /* make DMA engine forget about the failed command */
+ if (qc->err_mask)
+ sil24_init_port(ap);
+}
+
static inline void sil24_cblk_free(struct sil24_port_priv *pp, struct device *dev)
{
const size_t cb_size = sizeof(*pp->cmd_block);
@@ -1066,15 +1113,6 @@ static int sil24_init_one(struct pci_dev *pdev, const struct pci_device_id *ent)
/* Always use 64bit activation */
writel(PORT_CS_32BIT_ACTV, port + PORT_CTRL_CLR);
- /* Configure interrupts */
- writel(0xffff, port + PORT_IRQ_ENABLE_CLR);
- writel(PORT_IRQ_COMPLETE | PORT_IRQ_ERROR |
- PORT_IRQ_SDB_NOTIFY, port + PORT_IRQ_ENABLE_SET);
-
- /* Clear interrupts */
- writel(0x0fff0fff, port + PORT_IRQ_STAT);
- writel(PORT_CS_IRQ_WOC, port + PORT_CTRL_CLR);
-
/* Clear port multiplier enable and resume bits */
writel(PORT_CS_PM_EN | PORT_CS_RESUME, port + PORT_CTRL_CLR);
}
diff --git a/drivers/scsi/sata_sx4.c b/drivers/scsi/sata_sx4.c
index 4c07ba1f6e6..70a69548829 100644
--- a/drivers/scsi/sata_sx4.c
+++ b/drivers/scsi/sata_sx4.c
@@ -868,15 +868,16 @@ static void pdc_eng_timeout(struct ata_port *ap)
switch (qc->tf.protocol) {
case ATA_PROT_DMA:
case ATA_PROT_NODATA:
- printk(KERN_ERR "ata%u: command timeout\n", ap->id);
+ ata_port_printk(ap, KERN_ERR, "command timeout\n");
qc->err_mask |= __ac_err_mask(ata_wait_idle(ap));
break;
default:
drv_stat = ata_busy_wait(ap, ATA_BUSY | ATA_DRQ, 1000);
- printk(KERN_ERR "ata%u: unknown timeout, cmd 0x%x stat 0x%x\n",
- ap->id, qc->tf.command, drv_stat);
+ ata_port_printk(ap, KERN_ERR,
+ "unknown timeout, cmd 0x%x stat 0x%x\n",
+ qc->tf.command, drv_stat);
qc->err_mask |= ac_err_mask(drv_stat);
break;
diff --git a/drivers/scsi/scsi.c b/drivers/scsi/scsi.c
index 73994e2ac2c..dae4f08adde 100644
--- a/drivers/scsi/scsi.c
+++ b/drivers/scsi/scsi.c
@@ -720,6 +720,24 @@ void scsi_init_cmd_from_req(struct scsi_cmnd *cmd, struct scsi_request *sreq)
static DEFINE_PER_CPU(struct list_head, scsi_done_q);
/**
+ * scsi_req_abort_cmd -- Request command recovery for the specified command
+ * cmd: pointer to the SCSI command of interest
+ *
+ * This function requests that SCSI Core start recovery for the
+ * command by deleting the timer and adding the command to the eh
+ * queue. It can be called by either LLDDs or SCSI Core. LLDDs who
+ * implement their own error recovery MAY ignore the timeout event if
+ * they generated scsi_req_abort_cmd.
+ */
+void scsi_req_abort_cmd(struct scsi_cmnd *cmd)
+{
+ if (!scsi_delete_timer(cmd))
+ return;
+ scsi_times_out(cmd);
+}
+EXPORT_SYMBOL(scsi_req_abort_cmd);
+
+/**
* scsi_done - Enqueue the finished SCSI command into the done queue.
* @cmd: The SCSI Command for which a low-level device driver (LLDD) gives
* ownership back to SCSI Core -- i.e. the LLDD has finished with it.
diff --git a/drivers/scsi/scsi_error.c b/drivers/scsi/scsi_error.c
index 1c75646f968..9ca71cbefce 100644
--- a/drivers/scsi/scsi_error.c
+++ b/drivers/scsi/scsi_error.c
@@ -56,6 +56,7 @@ void scsi_eh_wakeup(struct Scsi_Host *shost)
printk("Waking error handler thread\n"));
}
}
+EXPORT_SYMBOL_GPL(scsi_eh_wakeup);
/**
* scsi_eh_scmd_add - add scsi cmd to error handling.
@@ -1517,7 +1518,7 @@ int scsi_error_handler(void *data)
*/
set_current_state(TASK_INTERRUPTIBLE);
while (!kthread_should_stop()) {
- if (shost->host_failed == 0 ||
+ if ((shost->host_failed == 0 && shost->host_eh_scheduled == 0) ||
shost->host_failed != shost->host_busy) {
SCSI_LOG_ERROR_RECOVERY(1,
printk("Error handler scsi_eh_%d sleeping\n",
diff --git a/drivers/scsi/scsi_lib.c b/drivers/scsi/scsi_lib.c
index 7b0f9a3810d..c55d195b6f4 100644
--- a/drivers/scsi/scsi_lib.c
+++ b/drivers/scsi/scsi_lib.c
@@ -566,7 +566,7 @@ void scsi_device_unbusy(struct scsi_device *sdev)
spin_lock_irqsave(shost->host_lock, flags);
shost->host_busy--;
if (unlikely(scsi_host_in_recovery(shost) &&
- shost->host_failed))
+ (shost->host_failed || shost->host_eh_scheduled)))
scsi_eh_wakeup(shost);
spin_unlock(shost->host_lock);
spin_lock(sdev->request_queue->queue_lock);
diff --git a/drivers/scsi/scsi_priv.h b/drivers/scsi/scsi_priv.h
index 27c48274e8c..0b39081113b 100644
--- a/drivers/scsi/scsi_priv.h
+++ b/drivers/scsi/scsi_priv.h
@@ -63,7 +63,6 @@ extern int scsi_delete_timer(struct scsi_cmnd *);
extern void scsi_times_out(struct scsi_cmnd *cmd);
extern int scsi_error_handler(void *host);
extern int scsi_decide_disposition(struct scsi_cmnd *cmd);
-extern void scsi_eh_wakeup(struct Scsi_Host *shost);
extern int scsi_eh_scmd_add(struct scsi_cmnd *, int);
/* scsi_lib.c */
diff --git a/include/linux/ata.h b/include/linux/ata.h
index 206d859083e..1cbeb434af9 100644
--- a/include/linux/ata.h
+++ b/include/linux/ata.h
@@ -97,6 +97,9 @@ enum {
ATA_DRQ = (1 << 3), /* data request i/o */
ATA_ERR = (1 << 0), /* have an error */
ATA_SRST = (1 << 2), /* software reset */
+ ATA_ICRC = (1 << 7), /* interface CRC error */
+ ATA_UNC = (1 << 6), /* uncorrectable media error */
+ ATA_IDNF = (1 << 4), /* ID not found */
ATA_ABORTED = (1 << 2), /* command aborted */
/* ATA command block registers */
@@ -192,6 +195,16 @@ enum {
SCR_ACTIVE = 3,
SCR_NOTIFICATION = 4,
+ /* SError bits */
+ SERR_DATA_RECOVERED = (1 << 0), /* recovered data error */
+ SERR_COMM_RECOVERED = (1 << 1), /* recovered comm failure */
+ SERR_DATA = (1 << 8), /* unrecovered data error */
+ SERR_PERSISTENT = (1 << 9), /* persistent data/comm error */
+ SERR_PROTOCOL = (1 << 10), /* protocol violation */
+ SERR_INTERNAL = (1 << 11), /* host internal error */
+ SERR_PHYRDY_CHG = (1 << 16), /* PHY RDY changed */
+ SERR_DEV_XCHG = (1 << 26), /* device exchanged */
+
/* struct ata_taskfile flags */
ATA_TFLAG_LBA48 = (1 << 0), /* enable 48-bit LBA and "HOB" */
ATA_TFLAG_ISADDR = (1 << 1), /* enable r/w to nsect/lba regs */
diff --git a/include/linux/libata.h b/include/linux/libata.h
index bf86ee47453..db17723e23f 100644
--- a/include/linux/libata.h
+++ b/include/linux/libata.h
@@ -108,7 +108,9 @@ enum {
LIBATA_MAX_PRD = ATA_MAX_PRD / 2,
ATA_MAX_PORTS = 8,
ATA_DEF_QUEUE = 1,
- ATA_MAX_QUEUE = 1,
+ /* tag ATA_MAX_QUEUE - 1 is reserved for internal commands */
+ ATA_MAX_QUEUE = 2,
+ ATA_TAG_INTERNAL = ATA_MAX_QUEUE - 1,
ATA_MAX_SECTORS = 200, /* FIXME */
ATA_MAX_BUS = 2,
ATA_DEF_BUSY_WAIT = 10000,
@@ -149,11 +151,15 @@ enum {
ATA_FLAG_PIO_POLLING = (1 << 10), /* use polling PIO if LLD
* doesn't handle PIO interrupts */
- ATA_FLAG_DEBUGMSG = (1 << 17),
- ATA_FLAG_FLUSH_PORT_TASK = (1 << 18), /* flush port task */
+ ATA_FLAG_DEBUGMSG = (1 << 14),
+ ATA_FLAG_FLUSH_PORT_TASK = (1 << 15), /* flush port task */
- ATA_FLAG_DISABLED = (1 << 19), /* port is disabled, ignore it */
- ATA_FLAG_SUSPENDED = (1 << 20), /* port is suspended */
+ ATA_FLAG_EH_PENDING = (1 << 16), /* EH pending */
+ ATA_FLAG_FROZEN = (1 << 17), /* port is frozen */
+ ATA_FLAG_RECOVERED = (1 << 18), /* recovery action performed */
+
+ ATA_FLAG_DISABLED = (1 << 22), /* port is disabled, ignore it */
+ ATA_FLAG_SUSPENDED = (1 << 23), /* port is suspended (power) */
/* bits 24:31 of ap->flags are reserved for LLDD specific flags */
@@ -163,7 +169,11 @@ enum {
ATA_QCFLAG_SINGLE = (1 << 2), /* no s/g, just a single buffer */
ATA_QCFLAG_DMAMAP = ATA_QCFLAG_SG | ATA_QCFLAG_SINGLE,
ATA_QCFLAG_IO = (1 << 3), /* standard IO command */
- ATA_QCFLAG_EH_SCHEDULED = (1 << 4), /* EH scheduled */
+ ATA_QCFLAG_RESULT_TF = (1 << 4), /* result TF requested */
+
+ ATA_QCFLAG_FAILED = (1 << 16), /* cmd failed and is owned by EH */
+ ATA_QCFLAG_SENSE_VALID = (1 << 17), /* sense data valid */
+ ATA_QCFLAG_EH_SCHEDULED = (1 << 18), /* EH scheduled (obsolete) */
/* host set flags */
ATA_HOST_SIMPLEX = (1 << 0), /* Host is simplex, one DMA channel per host_set only */
@@ -214,8 +224,29 @@ enum {
ATA_PORT_PRIMARY = (1 << 0),
ATA_PORT_SECONDARY = (1 << 1),
+ /* ering size */
+ ATA_ERING_SIZE = 32,
+
+ /* desc_len for ata_eh_info and context */
+ ATA_EH_DESC_LEN = 80,
+
+ /* reset / recovery action types */
+ ATA_EH_REVALIDATE = (1 << 0),
+ ATA_EH_SOFTRESET = (1 << 1),
+ ATA_EH_HARDRESET = (1 << 2),
+
+ ATA_EH_RESET_MASK = ATA_EH_SOFTRESET | ATA_EH_HARDRESET,
+
+ /* ata_eh_info->flags */
+ ATA_EHI_DID_RESET = (1 << 0), /* already reset this port */
+
+ /* max repeat if error condition is still set after ->error_handler */
+ ATA_EH_MAX_REPEAT = 5,
+
/* how hard are we gonna try to probe/recover devices */
ATA_PROBE_MAX_TRIES = 3,
+ ATA_EH_RESET_TRIES = 3,
+ ATA_EH_DEV_TRIES = 3,
};
enum hsm_task_states {
@@ -340,7 +371,7 @@ struct ata_queued_cmd {
struct scatterlist *__sg;
unsigned int err_mask;
-
+ struct ata_taskfile result_tf;
ata_qc_cb_t complete_fn;
void *private_data;
@@ -352,12 +383,24 @@ struct ata_host_stats {
unsigned long rw_reqbuf;
};
+struct ata_ering_entry {
+ int is_io;
+ unsigned int err_mask;
+ u64 timestamp;
+};
+
+struct ata_ering {
+ int cursor;
+ struct ata_ering_entry ring[ATA_ERING_SIZE];
+};
+
struct ata_device {
+ struct ata_port *ap;
u64 n_sectors; /* size of device, if ATA */
unsigned long flags; /* ATA_DFLAG_xxx */
unsigned int class; /* ATA_DEV_xxx */
unsigned int devno; /* 0 or 1 */
- u16 *id; /* IDENTIFY xxx DEVICE data */
+ u16 id[ATA_ID_WORDS]; /* IDENTIFY xxx DEVICE data */
u8 pio_mode;
u8 dma_mode;
u8 xfer_mode;
@@ -377,6 +420,24 @@ struct ata_device {
u16 cylinders; /* Number of cylinders */
u16 heads; /* Number of heads */
u16 sectors; /* Number of sectors per track */
+
+ /* error history */
+ struct ata_ering ering;
+};
+
+struct ata_eh_info {
+ struct ata_device *dev; /* offending device */
+ u32 serror; /* SError from LLDD */
+ unsigned int err_mask; /* port-wide err_mask */
+ unsigned int action; /* ATA_EH_* action mask */
+ unsigned int flags; /* ATA_EHI_* flags */
+ char desc[ATA_EH_DESC_LEN];
+ int desc_len;
+};
+
+struct ata_eh_context {
+ struct ata_eh_info i;
+ int tries[ATA_MAX_DEVICES];
};
struct ata_port {
@@ -403,6 +464,11 @@ struct ata_port {
unsigned int cbl; /* cable type; ATA_CBL_xxx */
unsigned int sata_spd_limit; /* SATA PHY speed limit */
+ /* record runtime error info, protected by host_set lock */
+ struct ata_eh_info eh_info;
+ /* EH context owned by EH */
+ struct ata_eh_context eh_context;
+
struct ata_device device[ATA_MAX_DEVICES];
struct ata_queued_cmd qcmd[ATA_MAX_QUEUE];
@@ -421,6 +487,8 @@ struct ata_port {
struct list_head eh_done_q;
void *private_data;
+
+ u8 sector_buf[ATA_SECT_SIZE]; /* owned by EH */
};
struct ata_port_operations {
@@ -454,7 +522,15 @@ struct ata_port_operations {
void (*qc_prep) (struct ata_queued_cmd *qc);
unsigned int (*qc_issue) (struct ata_queued_cmd *qc);
- void (*eng_timeout) (struct ata_port *ap);
+ /* Error handlers. ->error_handler overrides ->eng_timeout and
+ * indicates that new-style EH is in place.
+ */
+ void (*eng_timeout) (struct ata_port *ap); /* obsolete */
+
+ void (*freeze) (struct ata_port *ap);
+ void (*thaw) (struct ata_port *ap);
+ void (*error_handler) (struct ata_port *ap);
+ void (*post_internal_cmd) (struct ata_queued_cmd *qc);
irqreturn_t (*irq_handler)(int, void *, struct pt_regs *);
void (*irq_clear) (struct ata_port *);
@@ -500,7 +576,7 @@ extern void ata_port_probe(struct ata_port *);
extern void __sata_phy_reset(struct ata_port *ap);
extern void sata_phy_reset(struct ata_port *ap);
extern void ata_bus_reset(struct ata_port *ap);
-extern int ata_set_sata_spd(struct ata_port *ap);
+extern int sata_set_spd(struct ata_port *ap);
extern int ata_drive_probe_reset(struct ata_port *ap,
ata_probeinit_fn_t probeinit,
ata_reset_fn_t softreset, ata_reset_fn_t hardreset,
@@ -509,8 +585,7 @@ extern void ata_std_probeinit(struct ata_port *ap);
extern int ata_std_softreset(struct ata_port *ap, unsigned int *classes);
extern int sata_std_hardreset(struct ata_port *ap, unsigned int *class);
extern void ata_std_postreset(struct ata_port *ap, unsigned int *classes);
-extern int ata_dev_revalidate(struct ata_port *ap, struct ata_device *dev,
- int post_reset);
+extern int ata_dev_revalidate(struct ata_device *dev, int post_reset);
extern void ata_port_disable(struct ata_port *);
extern void ata_std_ports(struct ata_ioports *ioaddr);
#ifdef CONFIG_PCI
@@ -526,14 +601,18 @@ extern void ata_host_set_remove(struct ata_host_set *host_set);
extern int ata_scsi_detect(struct scsi_host_template *sht);
extern int ata_scsi_ioctl(struct scsi_device *dev, int cmd, void __user *arg);
extern int ata_scsi_queuecmd(struct scsi_cmnd *cmd, void (*done)(struct scsi_cmnd *));
-extern void ata_eh_qc_complete(struct ata_queued_cmd *qc);
-extern void ata_eh_qc_retry(struct ata_queued_cmd *qc);
extern int ata_scsi_release(struct Scsi_Host *host);
extern unsigned int ata_host_intr(struct ata_port *ap, struct ata_queued_cmd *qc);
+extern int sata_scr_valid(struct ata_port *ap);
+extern int sata_scr_read(struct ata_port *ap, int reg, u32 *val);
+extern int sata_scr_write(struct ata_port *ap, int reg, u32 val);
+extern int sata_scr_write_flush(struct ata_port *ap, int reg, u32 val);
+extern int ata_port_online(struct ata_port *ap);
+extern int ata_port_offline(struct ata_port *ap);
extern int ata_scsi_device_resume(struct scsi_device *);
extern int ata_scsi_device_suspend(struct scsi_device *, pm_message_t state);
-extern int ata_device_resume(struct ata_port *, struct ata_device *);
-extern int ata_device_suspend(struct ata_port *, struct ata_device *, pm_message_t state);
+extern int ata_device_resume(struct ata_device *);
+extern int ata_device_suspend(struct ata_device *, pm_message_t state);
extern int ata_ratelimit(void);
extern unsigned int ata_busy_sleep(struct ata_port *ap,
unsigned long timeout_pat,
@@ -578,16 +657,22 @@ extern void ata_bmdma_start (struct ata_queued_cmd *qc);
extern void ata_bmdma_stop(struct ata_queued_cmd *qc);
extern u8 ata_bmdma_status(struct ata_port *ap);
extern void ata_bmdma_irq_clear(struct ata_port *ap);
-extern void __ata_qc_complete(struct ata_queued_cmd *qc);
-extern void ata_scsi_simulate(struct ata_port *ap, struct ata_device *dev,
- struct scsi_cmnd *cmd,
+extern void ata_bmdma_freeze(struct ata_port *ap);
+extern void ata_bmdma_thaw(struct ata_port *ap);
+extern void ata_bmdma_drive_eh(struct ata_port *ap,
+ ata_reset_fn_t softreset,
+ ata_reset_fn_t hardreset,
+ ata_postreset_fn_t postreset);
+extern void ata_bmdma_error_handler(struct ata_port *ap);
+extern void ata_bmdma_post_internal_cmd(struct ata_queued_cmd *qc);
+extern void ata_qc_complete(struct ata_queued_cmd *qc);
+extern void ata_scsi_simulate(struct ata_device *dev, struct scsi_cmnd *cmd,
void (*done)(struct scsi_cmnd *));
extern int ata_std_bios_param(struct scsi_device *sdev,
struct block_device *bdev,
sector_t capacity, int geom[]);
extern int ata_scsi_slave_config(struct scsi_device *sdev);
-extern struct ata_device *ata_dev_pair(struct ata_port *ap,
- struct ata_device *adev);
+extern struct ata_device *ata_dev_pair(struct ata_device *adev);
/*
* Timing helpers
@@ -637,10 +722,46 @@ extern unsigned long ata_pci_default_filter(const struct ata_port *, struct ata_
* EH
*/
extern void ata_eng_timeout(struct ata_port *ap);
+
+extern void ata_port_schedule_eh(struct ata_port *ap);
+extern int ata_port_abort(struct ata_port *ap);
+extern int ata_port_freeze(struct ata_port *ap);
+
+extern void ata_eh_freeze_port(struct ata_port *ap);
+extern void ata_eh_thaw_port(struct ata_port *ap);
+
extern void ata_eh_qc_complete(struct ata_queued_cmd *qc);
extern void ata_eh_qc_retry(struct ata_queued_cmd *qc);
+extern void ata_do_eh(struct ata_port *ap, ata_reset_fn_t softreset,
+ ata_reset_fn_t hardreset, ata_postreset_fn_t postreset);
+
+/*
+ * printk helpers
+ */
+#define ata_port_printk(ap, lv, fmt, args...) \
+ printk(lv"ata%u: "fmt, (ap)->id , ##args)
+
+#define ata_dev_printk(dev, lv, fmt, args...) \
+ printk(lv"ata%u.%02u: "fmt, (dev)->ap->id, (dev)->devno , ##args)
+/*
+ * ata_eh_info helpers
+ */
+#define ata_ehi_push_desc(ehi, fmt, args...) do { \
+ (ehi)->desc_len += scnprintf((ehi)->desc + (ehi)->desc_len, \
+ ATA_EH_DESC_LEN - (ehi)->desc_len, \
+ fmt , ##args); \
+} while (0)
+
+#define ata_ehi_clear_desc(ehi) do { \
+ (ehi)->desc[0] = '\0'; \
+ (ehi)->desc_len = 0; \
+} while (0)
+
+/*
+ * qc helpers
+ */
static inline int
ata_sg_is_last(struct scatterlist *sg, struct ata_queued_cmd *qc)
{
@@ -683,6 +804,11 @@ static inline unsigned int ata_tag_valid(unsigned int tag)
return (tag < ATA_MAX_QUEUE) ? 1 : 0;
}
+static inline unsigned int ata_tag_internal(unsigned int tag)
+{
+ return tag == ATA_MAX_QUEUE - 1;
+}
+
static inline unsigned int ata_class_enabled(unsigned int class)
{
return class == ATA_DEV_ATA || class == ATA_DEV_ATAPI;
@@ -791,20 +917,35 @@ static inline void ata_qc_set_polling(struct ata_queued_cmd *qc)
qc->tf.ctl |= ATA_NIEN;
}
-static inline struct ata_queued_cmd *ata_qc_from_tag (struct ata_port *ap,
- unsigned int tag)
+static inline struct ata_queued_cmd *__ata_qc_from_tag(struct ata_port *ap,
+ unsigned int tag)
{
if (likely(ata_tag_valid(tag)))
return &ap->qcmd[tag];
return NULL;
}
-static inline void ata_tf_init(struct ata_port *ap, struct ata_taskfile *tf, unsigned int device)
+static inline struct ata_queued_cmd *ata_qc_from_tag(struct ata_port *ap,
+ unsigned int tag)
+{
+ struct ata_queued_cmd *qc = __ata_qc_from_tag(ap, tag);
+
+ if (unlikely(!qc) || !ap->ops->error_handler)
+ return qc;
+
+ if ((qc->flags & (ATA_QCFLAG_ACTIVE |
+ ATA_QCFLAG_FAILED)) == ATA_QCFLAG_ACTIVE)
+ return qc;
+
+ return NULL;
+}
+
+static inline void ata_tf_init(struct ata_device *dev, struct ata_taskfile *tf)
{
memset(tf, 0, sizeof(*tf));
- tf->ctl = ap->ctl;
- if (device == 0)
+ tf->ctl = dev->ap->ctl;
+ if (dev->devno == 0)
tf->device = ATA_DEVICE_OBS;
else
tf->device = ATA_DEVICE_OBS | ATA_DEV1;
@@ -819,26 +960,11 @@ static inline void ata_qc_reinit(struct ata_queued_cmd *qc)
qc->nbytes = qc->curbytes = 0;
qc->err_mask = 0;
- ata_tf_init(qc->ap, &qc->tf, qc->dev->devno);
-}
-
-/**
- * ata_qc_complete - Complete an active ATA command
- * @qc: Command to complete
- * @err_mask: ATA Status register contents
- *
- * Indicate to the mid and upper layers that an ATA
- * command has completed, with either an ok or not-ok status.
- *
- * LOCKING:
- * spin_lock_irqsave(host_set lock)
- */
-static inline void ata_qc_complete(struct ata_queued_cmd *qc)
-{
- if (unlikely(qc->flags & ATA_QCFLAG_EH_SCHEDULED))
- return;
+ ata_tf_init(qc->dev, &qc->tf);
- __ata_qc_complete(qc);
+ /* init result_tf such that it indicates normal completion */
+ qc->result_tf.command = ATA_DRDY;
+ qc->result_tf.feature = 0;
}
/**
@@ -917,28 +1043,6 @@ static inline u8 ata_irq_ack(struct ata_port *ap, unsigned int chk_drq)
return status;
}
-static inline u32 scr_read(struct ata_port *ap, unsigned int reg)
-{
- return ap->ops->scr_read(ap, reg);
-}
-
-static inline void scr_write(struct ata_port *ap, unsigned int reg, u32 val)
-{
- ap->ops->scr_write(ap, reg, val);
-}
-
-static inline void scr_write_flush(struct ata_port *ap, unsigned int reg,
- u32 val)
-{
- ap->ops->scr_write(ap, reg, val);
- (void) ap->ops->scr_read(ap, reg);
-}
-
-static inline unsigned int sata_dev_present(struct ata_port *ap)
-{
- return ((scr_read(ap, SCR_STATUS) & 0xf) == 0x3) ? 1 : 0;
-}
-
static inline int ata_try_flush_cache(const struct ata_device *dev)
{
return ata_id_wcache_enabled(dev->id) ||
diff --git a/include/scsi/scsi_cmnd.h b/include/scsi/scsi_cmnd.h
index 1ace1b9fe53..88c6c4da6c0 100644
--- a/include/scsi/scsi_cmnd.h
+++ b/include/scsi/scsi_cmnd.h
@@ -151,5 +151,6 @@ extern struct scsi_cmnd *scsi_get_command(struct scsi_device *, gfp_t);
extern void scsi_put_command(struct scsi_cmnd *);
extern void scsi_io_completion(struct scsi_cmnd *, unsigned int, unsigned int);
extern void scsi_finish_command(struct scsi_cmnd *cmd);
+extern void scsi_req_abort_cmd(struct scsi_cmnd *cmd);
#endif /* _SCSI_SCSI_CMND_H */
diff --git a/include/scsi/scsi_eh.h b/include/scsi/scsi_eh.h
index d160880b2a8..212c983a6a1 100644
--- a/include/scsi/scsi_eh.h
+++ b/include/scsi/scsi_eh.h
@@ -35,6 +35,7 @@ static inline int scsi_sense_valid(struct scsi_sense_hdr *sshdr)
}
+extern void scsi_eh_wakeup(struct Scsi_Host *shost);
extern void scsi_eh_finish_cmd(struct scsi_cmnd *scmd,
struct list_head *done_q);
extern void scsi_eh_flush_done_q(struct list_head *done_q);
diff --git a/include/scsi/scsi_host.h b/include/scsi/scsi_host.h
index de6ce541a04..a42efd6e4be 100644
--- a/include/scsi/scsi_host.h
+++ b/include/scsi/scsi_host.h
@@ -472,6 +472,7 @@ struct Scsi_Host {
*/
unsigned int host_busy; /* commands actually active on low-level */
unsigned int host_failed; /* commands that failed. */
+ unsigned int host_eh_scheduled; /* EH scheduled without command */
unsigned short host_no; /* Used for IOCTL_GET_IDLUN, /proc/scsi et al. */
int resetting; /* if set, it means that last_reset is a valid value */
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-12 06:17:39 +0000