aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--arch/arm/configs/gta01_moredrivers_defconfig8
-rw-r--r--arch/arm/configs/gta02_micro_defconfig2
-rw-r--r--arch/arm/configs/gta02_moredrivers_defconfig2
-rw-r--r--arch/arm/configs/gta02_packaging_defconfig2
-rw-r--r--arch/arm/mach-s3c2410/Kconfig1
-rw-r--r--arch/arm/mach-s3c2410/mach-gta01.c1
-rw-r--r--arch/arm/mach-s3c2442/Kconfig1
-rw-r--r--arch/arm/mach-s3c2442/mach-gta02.c1
-rw-r--r--arch/arm/plat-s3c/include/plat/adc.h10
-rw-r--r--arch/arm/plat-s3c24xx/adc.c24
-rw-r--r--arch/arm/plat-s3c24xx/devs.c1
-rw-r--r--drivers/ar6000/ar6000/ar6000_drv.c20
-rw-r--r--drivers/input/touchscreen/s3c2410_ts.c316
-rw-r--r--drivers/input/touchscreen/ts_filter.h2
-rw-r--r--drivers/input/touchscreen/ts_filter_chain.c2
-rw-r--r--drivers/input/touchscreen/ts_filter_chain.h2
-rw-r--r--drivers/input/touchscreen/ts_filter_group.c178
-rw-r--r--drivers/input/touchscreen/ts_filter_mean.c2
-rw-r--r--drivers/input/touchscreen/ts_filter_mean.h2
-rw-r--r--drivers/input/touchscreen/ts_filter_median.c2
-rw-r--r--drivers/input/touchscreen/ts_filter_median.h2
21 files changed, 298 insertions, 283 deletions
diff --git a/arch/arm/configs/gta01_moredrivers_defconfig b/arch/arm/configs/gta01_moredrivers_defconfig
index 36d2b170b52..411acab046f 100644
--- a/arch/arm/configs/gta01_moredrivers_defconfig
+++ b/arch/arm/configs/gta01_moredrivers_defconfig
@@ -180,7 +180,7 @@ CONFIG_S3C2410_CLOCK=y
CONFIG_S3C24XX_GPIO_EXTRA=0
CONFIG_S3C2410_DMA=y
# CONFIG_S3C2410_DMA_DEBUG is not set
-# CONFIG_S3C24XX_ADC is not set
+CONFIG_S3C24XX_ADC=y
CONFIG_MACH_NEO1973=y
CONFIG_PLAT_S3C=y
CONFIG_CPU_LLSERIAL_S3C2410_ONLY=y
@@ -1192,11 +1192,7 @@ CONFIG_SSB_POSSIBLE=y
CONFIG_MFD_PCF50606=y
CONFIG_PCF50606_ADC=y
CONFIG_PCF50606_GPO=y
-CONFIG_MFD_GLAMO=y
-CONFIG_MFD_GLAMO_FB=y
-CONFIG_MFD_GLAMO_SPI_GPIO=y
-CONFIG_MFD_GLAMO_SPI_FB=y
-CONFIG_MFD_GLAMO_MCI=y
+# CONFIG_MFD_GLAMO is not set
#
# Multimedia devices
diff --git a/arch/arm/configs/gta02_micro_defconfig b/arch/arm/configs/gta02_micro_defconfig
index ae30c4b1ddb..6a6ff77ea2c 100644
--- a/arch/arm/configs/gta02_micro_defconfig
+++ b/arch/arm/configs/gta02_micro_defconfig
@@ -158,7 +158,7 @@ CONFIG_S3C24XX_PWM=y
CONFIG_S3C24XX_GPIO_EXTRA=0
CONFIG_S3C2410_DMA=y
# CONFIG_S3C2410_DMA_DEBUG is not set
-# CONFIG_S3C24XX_ADC is not set
+CONFIG_S3C24XX_ADC=y
CONFIG_MACH_NEO1973=y
CONFIG_PLAT_S3C=y
CONFIG_CPU_LLSERIAL_S3C2440_ONLY=y
diff --git a/arch/arm/configs/gta02_moredrivers_defconfig b/arch/arm/configs/gta02_moredrivers_defconfig
index bd66869f74a..13b41215faa 100644
--- a/arch/arm/configs/gta02_moredrivers_defconfig
+++ b/arch/arm/configs/gta02_moredrivers_defconfig
@@ -180,7 +180,7 @@ CONFIG_S3C24XX_PWM=y
CONFIG_S3C24XX_GPIO_EXTRA=0
CONFIG_S3C2410_DMA=y
# CONFIG_S3C2410_DMA_DEBUG is not set
-# CONFIG_S3C24XX_ADC is not set
+CONFIG_S3C24XX_ADC=y
CONFIG_MACH_SMDK=y
CONFIG_MACH_NEO1973=y
CONFIG_PLAT_S3C=y
diff --git a/arch/arm/configs/gta02_packaging_defconfig b/arch/arm/configs/gta02_packaging_defconfig
index 15defd28841..03c72d5652b 100644
--- a/arch/arm/configs/gta02_packaging_defconfig
+++ b/arch/arm/configs/gta02_packaging_defconfig
@@ -180,7 +180,7 @@ CONFIG_S3C24XX_PWM=y
CONFIG_S3C24XX_GPIO_EXTRA=0
CONFIG_S3C2410_DMA=y
# CONFIG_S3C2410_DMA_DEBUG is not set
-# CONFIG_S3C24XX_ADC is not set
+CONFIG_S3C24XX_ADC=y
CONFIG_MACH_SMDK=y
CONFIG_MACH_NEO1973=y
CONFIG_PLAT_S3C=y
diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig
index f4f7af180aa..02f406bea08 100644
--- a/arch/arm/mach-s3c2410/Kconfig
+++ b/arch/arm/mach-s3c2410/Kconfig
@@ -155,6 +155,7 @@ config MACH_NEO1973_GTA01
select PCF50606_WATCHDOG
select POWER_SUPPLY
select BATTERY_GTA01
+ select S3C24XX_ADC
help
Say Y here if you are using the FIC Neo1973 GSM Phone
diff --git a/arch/arm/mach-s3c2410/mach-gta01.c b/arch/arm/mach-s3c2410/mach-gta01.c
index 8a13a4adcfd..21726956ff6 100644
--- a/arch/arm/mach-s3c2410/mach-gta01.c
+++ b/arch/arm/mach-s3c2410/mach-gta01.c
@@ -560,6 +560,7 @@ static struct platform_device *gta01_devices[] __initdata = {
&s3c_device_sdi,
&s3c_device_usbgadget,
&s3c_device_nand,
+ &s3c_device_adc,
&s3c_device_ts,
};
diff --git a/arch/arm/mach-s3c2442/Kconfig b/arch/arm/mach-s3c2442/Kconfig
index aa184ba7586..13fb5e190b4 100644
--- a/arch/arm/mach-s3c2442/Kconfig
+++ b/arch/arm/mach-s3c2442/Kconfig
@@ -36,6 +36,7 @@ config MACH_NEO1973_GTA02
select S3C_PWM
select FIQ
select S3C_DEV_USB_HOST
+ select S3C24XX_ADC
help
Say Y here if you are using the FIC Neo1973 GSM Phone
diff --git a/arch/arm/mach-s3c2442/mach-gta02.c b/arch/arm/mach-s3c2442/mach-gta02.c
index 0a93749ef8c..42b8cea9ff1 100644
--- a/arch/arm/mach-s3c2442/mach-gta02.c
+++ b/arch/arm/mach-s3c2442/mach-gta02.c
@@ -1562,6 +1562,7 @@ static struct platform_device *gta02_devices[] __initdata = {
&s3c_device_usbgadget,
&s3c_device_nand,
&gta02_nor_flash,
+ &s3c_device_adc,
&s3c24xx_pwm_device,
&gta02_led_dev,
diff --git a/arch/arm/plat-s3c/include/plat/adc.h b/arch/arm/plat-s3c/include/plat/adc.h
index 43df2a404b0..d847bd476b6 100644
--- a/arch/arm/plat-s3c/include/plat/adc.h
+++ b/arch/arm/plat-s3c/include/plat/adc.h
@@ -19,10 +19,12 @@ struct s3c_adc_client;
extern int s3c_adc_start(struct s3c_adc_client *client,
unsigned int channel, unsigned int nr_samples);
-extern struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
- void (*select)(unsigned selected),
- void (*conv)(unsigned d0, unsigned d1),
- unsigned int is_ts);
+extern struct s3c_adc_client *
+ s3c_adc_register(struct platform_device *pdev,
+ void (*select)(unsigned selected),
+ void (*conv)(unsigned d0, unsigned d1,
+ unsigned *samples_left),
+ unsigned int is_ts);
extern void s3c_adc_release(struct s3c_adc_client *client);
diff --git a/arch/arm/plat-s3c24xx/adc.c b/arch/arm/plat-s3c24xx/adc.c
index 9a5c767e0a4..9056bcc6c17 100644
--- a/arch/arm/plat-s3c24xx/adc.c
+++ b/arch/arm/plat-s3c24xx/adc.c
@@ -45,7 +45,8 @@ struct s3c_adc_client {
unsigned char channel;
void (*select_cb)(unsigned selected);
- void (*convert_cb)(unsigned val1, unsigned val2);
+ void (*convert_cb)(unsigned val1, unsigned val2,
+ unsigned *samples_left);
};
struct adc_device {
@@ -57,6 +58,7 @@ struct adc_device {
void __iomem *regs;
unsigned int prescale;
+ unsigned int delay;
int irq;
};
@@ -67,10 +69,19 @@ static LIST_HEAD(adc_pending);
#define adc_dbg(_adc, msg...) dev_dbg(&(_adc)->pdev->dev, msg)
+#define AUTOPST (S3C2410_ADCTSC_YM_SEN | S3C2410_ADCTSC_YP_SEN | \
+ S3C2410_ADCTSC_XP_SEN | S3C2410_ADCTSC_AUTO_PST | \
+ S3C2410_ADCTSC_XY_PST(0))
+
+
static inline void s3c_adc_convert(struct adc_device *adc)
{
unsigned con = readl(adc->regs + S3C2410_ADCCON);
+ if (adc->cur->is_ts)
+ writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST,
+ adc->regs + S3C2410_ADCTSC);
+
con |= S3C2410_ADCCON_ENABLE_START;
writel(con, adc->regs + S3C2410_ADCCON);
}
@@ -158,7 +169,8 @@ static void s3c_adc_default_select(unsigned select)
struct s3c_adc_client *s3c_adc_register(struct platform_device *pdev,
void (*select)(unsigned int selected),
- void (*conv)(unsigned d0, unsigned d1),
+ void (*conv)(unsigned d0, unsigned d1,
+ unsigned *samples_left),
unsigned int is_ts)
{
struct s3c_adc_client *client;
@@ -210,9 +222,10 @@ static irqreturn_t s3c_adc_irq(int irq, void *pw)
data1 = readl(adc->regs + S3C2410_ADCDAT1);
adc_dbg(adc, "read %d: 0x%04x, 0x%04x\n", client->nr_samples, data0, data1);
- (client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff);
+ client->nr_samples--;
+ (client->convert_cb)(data0 & 0x3ff, data1 & 0x3ff, &client->nr_samples);
- if (--client->nr_samples > 0) {
+ if (client->nr_samples > 0) {
/* fire another conversion for this */
client->select_cb(1);
@@ -244,6 +257,7 @@ static int s3c_adc_probe(struct platform_device *pdev)
adc->pdev = pdev;
adc->prescale = S3C2410_ADCCON_PRSCVL(49);
+ adc->delay = 0x2710;
adc->irq = platform_get_irq(pdev, 1);
if (adc->irq <= 0) {
@@ -283,6 +297,7 @@ static int s3c_adc_probe(struct platform_device *pdev)
writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
adc->regs + S3C2410_ADCCON);
+ writel(adc->delay, adc->regs + S3C2410_ADCDLY);
dev_info(dev, "attached adc driver\n");
@@ -338,6 +353,7 @@ static int s3c_adc_resume(struct platform_device *pdev)
writel(adc->prescale | S3C2410_ADCCON_PRSCEN,
adc->regs + S3C2410_ADCCON);
+ writel(adc->delay, adc->regs + S3C2410_ADCDLY);
return 0;
}
diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c
index 0fdaa54ada9..eeb95f863ce 100644
--- a/arch/arm/plat-s3c24xx/devs.c
+++ b/arch/arm/plat-s3c24xx/devs.c
@@ -205,6 +205,7 @@ EXPORT_SYMBOL(s3c_device_nand);
struct platform_device s3c_device_ts = {
.name = "s3c2410-ts",
.id = -1,
+ .dev.parent = &s3c_device_adc.dev,
};
EXPORT_SYMBOL(s3c_device_ts);
diff --git a/drivers/ar6000/ar6000/ar6000_drv.c b/drivers/ar6000/ar6000/ar6000_drv.c
index 21504f221dd..2941d5ed8c2 100644
--- a/drivers/ar6000/ar6000/ar6000_drv.c
+++ b/drivers/ar6000/ar6000/ar6000_drv.c
@@ -221,6 +221,15 @@ static void ar6000_detect_error(unsigned long ptr);
static struct net_device_stats *ar6000_get_stats(struct net_device *dev);
static struct iw_statistics *ar6000_get_iwstats(struct net_device * dev);
+static struct net_device_ops ar6000_netdev_ops = {
+ .ndo_open = ar6000_open,
+ .ndo_stop = ar6000_close,
+ .ndo_start_xmit = ar6000_data_tx,
+ .ndo_validate_addr = eth_validate_addr,
+ .ndo_do_ioctl = ar6000_ioctl,
+ .ndo_get_stats = &ar6000_get_stats,
+};
+
/*
* HTC service connection handlers
*/
@@ -858,20 +867,15 @@ ar6000_avail_ev(HTC_HANDLE HTCHandle)
spin_lock_init(&ar->arLock);
/* Don't install the init function if BMI is requested */
- if(!bmienable)
- {
- dev->init = ar6000_init;
+ if (!bmienable) {
+ ar6000_netdev_ops.ndo_init = ar6000_init;
} else {
AR_DEBUG_PRINTF(" BMI enabled \n");
}
- dev->open = &ar6000_open;
- dev->stop = &ar6000_close;
- dev->hard_start_xmit = &ar6000_data_tx;
- dev->get_stats = &ar6000_get_stats;
+ dev->netdev_ops = &ar6000_netdev_ops;
/* dev->tx_timeout = ar6000_tx_timeout; */
- dev->do_ioctl = &ar6000_ioctl;
dev->watchdog_timeo = AR6000_TX_TIMEOUT;
ar6000_ioctl_iwsetup(&ath_iw_handler_def);
dev->wireless_handlers = &ath_iw_handler_def;
diff --git a/drivers/input/touchscreen/s3c2410_ts.c b/drivers/input/touchscreen/s3c2410_ts.c
index 23d7e28e460..bcfdd00fa27 100644
--- a/drivers/input/touchscreen/s3c2410_ts.c
+++ b/drivers/input/touchscreen/s3c2410_ts.c
@@ -19,7 +19,7 @@
* ChangeLog
*
* 2004-09-05: Herbert Pƶtzl <herbert@13thfloor.at>
- * - added clock (de-)allocation code
+ * - Added clock (de-)allocation code
*
* 2005-03-06: Arnaud Patard <arnaud.patard@rtp-net.org>
* - h1940_ -> s3c2410 (this driver is now also used on the n30
@@ -37,12 +37,16 @@
* 2007-05-23: Harald Welte <laforge@openmoko.org>
* - Add proper support for S32440
*
- * 2008-06-23: Andy Green <andy@openmoko.com>
- * - removed averaging system
- * - added generic Touchscreen filter stuff
+ * 2008-06-23: Andy Green <andy@warmcat.com>
+ * - Removed averaging system
+ * - Added generic Touchscreen filter stuff
*
* 2008-11-27: Nelson Castillo <arhuaco@freaks-unidos.net>
- * - improve interrupt handling
+ * - Improve interrupt handling
+ *
+ * 2009-04-09: Nelson Castillo <arhuaco@freaks-unidos.net>
+ * - Use s3c-adc API (Vasily Khoruzhick <anarsoul@gmail.com> provided
+ * a working example for a simpler version of this driver).
*/
#include <linux/errno.h>
@@ -57,34 +61,34 @@
#include <linux/delay.h>
#include <linux/platform_device.h>
#include <linux/clk.h>
-#include <asm/io.h>
+#include <linux/io.h>
#include <asm/irq.h>
#include <mach/regs-gpio.h>
#include <mach/ts.h>
#include <mach/hardware.h>
#include <plat/regs-adc.h>
+#include <plat/adc.h>
#include "ts_filter_chain.h"
/* For ts.dev.id.version */
#define S3C2410TSVERSION 0x0101
-#define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | S3C2410_ADCTSC_XY_PST(0))
-
-#define WAIT4INT(x) (((x)<<8) | \
- S3C2410_ADCTSC_YM_SEN | \
- S3C2410_ADCTSC_YP_SEN | \
- S3C2410_ADCTSC_XP_SEN | \
- S3C2410_ADCTSC_XY_PST(3))
+#define WAIT4INT(x) (((x)<<8) | \
+ S3C2410_ADCTSC_YM_SEN | \
+ S3C2410_ADCTSC_YP_SEN | \
+ S3C2410_ADCTSC_XP_SEN | \
+ S3C2410_ADCTSC_XY_PST(3))
-#define AUTOPST (S3C2410_ADCTSC_YM_SEN | \
- S3C2410_ADCTSC_YP_SEN | \
- S3C2410_ADCTSC_XP_SEN | \
- S3C2410_ADCTSC_AUTO_PST | \
- S3C2410_ADCTSC_XY_PST(0))
+#define TSPRINTK(fmt, args...) \
+ printk(KERN_DEBUG "%s: " fmt, __func__ , ## args)
+#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
+# define DPRINTK TSPRINTK
+#else
+# define DPRINTK(fmt, args...)
+#endif
-#define DEBUG_LVL KERN_DEBUG
MODULE_AUTHOR("Arnaud Patard <arnaud.patard@rtp-net.org>");
MODULE_DESCRIPTION("s3c2410 touchscreen driver");
@@ -97,23 +101,23 @@ MODULE_LICENSE("GPL");
static char *s3c2410ts_name = "s3c2410 TouchScreen";
#define TS_RELEASE_TIMEOUT (HZ >> 7 ? HZ >> 7 : 1) /* 8ms (5ms if HZ is 200) */
-#define TS_EVENT_FIFO_SIZE (2 << 6) /* must be a power of 2 */
-
-#define TS_STATE_STANDBY 0 /* initial state */
-#define TS_STATE_PRESSED 1
-#define TS_STATE_RELEASE_PENDING 2
-#define TS_STATE_RELEASE 3
+#define TS_EVENT_FIFO_SIZE (2 << 6) /* Must be a power of 2. */
/*
* Per-touchscreen data.
*/
+enum ts_state {TS_STATE_STANDBY, TS_STATE_PRESSED, TS_STATE_RELEASE_PENDING,
+ TS_STATE_RELEASE};
+
struct s3c2410ts {
struct input_dev *dev;
struct ts_filter_chain *chain;
+ enum ts_state state;
int is_down;
- int state;
struct kfifo *event_fifo;
+ struct s3c_adc_client *adc_client;
+ unsigned adc_selected;
};
static struct s3c2410ts ts;
@@ -132,12 +136,31 @@ static inline void s3c2410_ts_connect(void)
s3c2410_gpio_cfgpin(S3C2410_GPG15, S3C2410_GPG15_nYPON);
}
+/*
+ * Code that starts ADC conversions.
+ */
+
+static void ts_adc_timer_f(unsigned long data);
+static struct timer_list ts_adc_timer = TIMER_INITIALIZER(ts_adc_timer_f, 0, 0);
+
+static void ts_adc_timer_f(unsigned long data)
+{
+ if (s3c_adc_start(ts.adc_client, 0, 1))
+ mod_timer(&ts_adc_timer, jiffies + 1);
+}
+
static void s3c2410_ts_start_adc_conversion(void)
{
- writel(S3C2410_ADCTSC_PULL_UP_DISABLE | AUTOPST,
- base_addr + S3C2410_ADCTSC);
- writel(readl(base_addr + S3C2410_ADCCON) | S3C2410_ADCCON_ENABLE_START,
- base_addr + S3C2410_ADCCON);
+ if (ts.adc_selected)
+ mod_timer(&ts_adc_timer, jiffies + 1);
+ else
+ ts_adc_timer_f(0);
+}
+
+/* Callback for the s3c-adc API. */
+void adc_selected_f(unsigned selected)
+{
+ ts.adc_selected = selected;
}
/*
@@ -161,18 +184,14 @@ static void ts_input_report(int event, int coords[])
input_report_key(ts.dev, BTN_TOUCH, 1);
input_report_abs(ts.dev, ABS_PRESSURE, 1);
-#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
- printk(DEBUG_LVL "T:%06d %6s (X:%03d, Y:%03d)\n",
- (int)tv.tv_usec, s[event], coords[0], coords[1]);
-#endif
+ DPRINTK("T:%06d %6s (X:%03d, Y:%03d)\n",
+ (int)tv.tv_usec, s[event], coords[0], coords[1]);
} else {
input_report_key(ts.dev, BTN_TOUCH, 0);
input_report_abs(ts.dev, ABS_PRESSURE, 0);
-#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
- printk(DEBUG_LVL "T:%06d %6s\n",
- (int)tv.tv_usec, s[event]);
-#endif
+ DPRINTK("T:%06d %6s\n",
+ (int)tv.tv_usec, s[event]);
}
input_sync(ts.dev);
@@ -199,7 +218,7 @@ static void event_send_timer_f(unsigned long data)
switch (event_type) {
case 'D':
if (ts.state == TS_STATE_RELEASE_PENDING)
- /* Ignore short UP event */
+ /* Ignore short UP event. */
ts.state = TS_STATE_PRESSED;
break;
@@ -208,21 +227,21 @@ static void event_send_timer_f(unsigned long data)
break;
case 'P':
- if (ts.is_down) /* stylus_action needs a conversion */
+ if (ts.is_down) /* Stylus_action needs a conversion. */
s3c2410_ts_start_adc_conversion();
if (unlikely(__kfifo_get(ts.event_fifo,
(unsigned char *)buf,
sizeof(int) * 2)
- != sizeof(int) * 2))
- goto ts_exit_error;
+ != sizeof(int) * 2)) {
+ /* This will only happen if we have a bug. */
+ TSPRINTK("Invalid packet\n");
+ return;
+ }
ts_input_report(IE_DOWN, buf);
ts.state = TS_STATE_PRESSED;
break;
-
- default:
- goto ts_exit_error;
}
noop_counter = 0;
@@ -243,11 +262,6 @@ static void event_send_timer_f(unsigned long data)
} else {
mod_timer(&event_send_timer, jiffies + TS_RELEASE_TIMEOUT);
}
-
- return;
-
-ts_exit_error: /* should not happen unless we have a bug */
- printk(KERN_ERR __FILE__ ": event_send_timer_f failed\n");
}
/*
@@ -260,70 +274,72 @@ static irqreturn_t stylus_updown(int irq, void *dev_id)
unsigned long data1;
int event_type;
- data0 = readl(base_addr+S3C2410_ADCDAT0);
- data1 = readl(base_addr+S3C2410_ADCDAT1);
+ data0 = readl(base_addr + S3C2410_ADCDAT0);
+ data1 = readl(base_addr + S3C2410_ADCDAT1);
- ts.is_down = (!(data0 & S3C2410_ADCDAT0_UPDOWN)) &&
- (!(data1 & S3C2410_ADCDAT0_UPDOWN));
+ ts.is_down = !(data0 & S3C2410_ADCDAT0_UPDOWN) &&
+ !(data1 & S3C2410_ADCDAT0_UPDOWN);
event_type = ts.is_down ? 'D' : 'U';
if (unlikely(__kfifo_put(ts.event_fifo, (unsigned char *)&event_type,
- sizeof(int)) != sizeof(int))) /* should not happen */
- printk(KERN_ERR __FILE__": stylus_updown lost event!\n");
+ sizeof(int)) != sizeof(int)))
+ /* Only happens if we have a bug. */
+ TSPRINTK("FIFO full\n");
if (ts.is_down)
s3c2410_ts_start_adc_conversion();
else
- writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC);
+ writel(WAIT4INT(0), base_addr + S3C2410_ADCTSC);
mod_timer(&event_send_timer, jiffies + 1);
return IRQ_HANDLED;
}
-static irqreturn_t stylus_action(int irq, void *dev_id)
+static void stylus_adc_action(unsigned p0, unsigned p1, unsigned *conv_left)
{
int buf[3];
- /* Grab the ADC results. */
- buf[1] = readl(base_addr + S3C2410_ADCDAT0) &
- S3C2410_ADCDAT0_XPDATA_MASK;
- buf[2] = readl(base_addr + S3C2410_ADCDAT1) &
- S3C2410_ADCDAT1_YPDATA_MASK;
+ /* TODO: Do we really need this? */
+ if (p0 & S3C2410_ADCDAT0_AUTO_PST ||
+ p1 & S3C2410_ADCDAT1_AUTO_PST) {
+ *conv_left = 1;
+ return;
+ }
+
+ buf[1] = p0;
+ buf[2] = p1;
switch (ts_filter_chain_feed(ts.chain, &buf[1])) {
case 0:
/* The filter wants more points. */
- s3c2410_ts_start_adc_conversion();
- return IRQ_HANDLED;
+ *conv_left = 1;
+ return;
case 1:
/* We have a point from the filters or no filtering enabled. */
buf[0] = 'P';
break;
default:
- printk(KERN_ERR __FILE__
- ":%d Invalid ts_filter_chain_feed return value.\n",
- __LINE__);
+ TSPRINTK("invalid return value\n");
case -1:
- /* Error. Ignore the event. */
+ /* Too much noise. Ignore the event. */
ts_filter_chain_clear(ts.chain);
writel(WAIT4INT(1), base_addr + S3C2410_ADCTSC);
- return IRQ_HANDLED;
+ return;
};
if (unlikely(__kfifo_put(ts.event_fifo, (unsigned char *)buf,
sizeof(int) * 3) != sizeof(int) * 3))
- printk(KERN_ERR __FILE__":stylus_action bug.\n");
+ /* This will only happen if we have a bug. */
+ TSPRINTK("FIFO full\n");
writel(WAIT4INT(1), base_addr + S3C2410_ADCTSC);
mod_timer(&event_send_timer, jiffies + 1);
- return IRQ_HANDLED;
+ return;
}
-static struct clk *adc_clock;
-
/*
* The functions for inserting/removing us as a module.
*/
@@ -339,56 +355,38 @@ static int __init s3c2410ts_probe(struct platform_device *pdev)
info = (struct s3c2410_ts_mach_info *)pdev->dev.platform_data;
- if (!info)
- {
- dev_err(&pdev->dev, "Hm... too bad: no platform data for ts\n");
+ if (!info) {
+ dev_err(&pdev->dev, "No platform data\n");
return -EINVAL;
}
-#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
- printk(DEBUG_LVL "Entering s3c2410ts_init\n");
-#endif
-
- adc_clock = clk_get(NULL, "adc");
- if (!adc_clock) {
- dev_err(&pdev->dev, "failed to get adc clock source\n");
- return -ENOENT;
- }
- clk_enable(adc_clock);
-
-#ifdef CONFIG_TOUCHSCREEN_S3C2410_DEBUG
- printk(DEBUG_LVL "got and enabled clock\n");
-#endif
-
- base_addr = ioremap(S3C2410_PA_ADC,0x20);
+ base_addr = ioremap(S3C2410_PA_ADC, 0x20);
if (base_addr == NULL) {
dev_err(&pdev->dev, "Failed to remap register block\n");
ret = -ENOMEM;
goto bail0;
}
-
/* If we acutally are a S3C2410: Configure GPIOs */
if (!strcmp(pdev->name, "s3c2410-ts"))
s3c2410_ts_connect();
- if ((info->presc & 0xff) > 0)
- writel(S3C2410_ADCCON_PRSCEN |
- S3C2410_ADCCON_PRSCVL(info->presc&0xFF),
- base_addr + S3C2410_ADCCON);
- else
- writel(0, base_addr+S3C2410_ADCCON);
-
- /* Initialise registers */
- if ((info->delay & 0xffff) > 0)
- writel(info->delay & 0xffff, base_addr + S3C2410_ADCDLY);
-
writel(WAIT4INT(0), base_addr + S3C2410_ADCTSC);
/* Initialise input stuff */
memset(&ts, 0, sizeof(struct s3c2410ts));
- input_dev = input_allocate_device();
+ ts.adc_client =
+ s3c_adc_register(pdev, adc_selected_f, stylus_adc_action, 1);
+ if (!ts.adc_client) {
+ dev_err(&pdev->dev,
+ "Unable to register s3c2410_ts as s3_adc client\n");
+ iounmap(base_addr);
+ ret = -EIO;
+ goto bail0;
+ }
+
+ input_dev = input_allocate_device();
if (!input_dev) {
dev_err(&pdev->dev, "Unable to allocate the input device\n");
ret = -ENOMEM;
@@ -415,7 +413,7 @@ static int __init s3c2410ts_probe(struct platform_device *pdev)
goto bail2;
}
- /* create the filter chain set up for the 2 coordinates we produce */
+ /* Create the filter chain set up for the 2 coordinates we produce. */
ts.chain = ts_filter_chain_create(pdev, info->filter_config, 2);
if (IS_ERR(ts.chain))
@@ -423,42 +421,31 @@ static int __init s3c2410ts_probe(struct platform_device *pdev)
ts_filter_chain_clear(ts.chain);
- /* Get irqs */
- if (request_irq(IRQ_ADC, stylus_action, IRQF_SAMPLE_RANDOM,
- "s3c2410_action", ts.dev)) {
- dev_err(&pdev->dev, "Could not allocate ts IRQ_ADC !\n");
- iounmap(base_addr);
- ret = -EIO;
- goto bail3;
- }
+ /* Get IRQ. */
if (request_irq(IRQ_TC, stylus_updown, IRQF_SAMPLE_RANDOM,
"s3c2410_action", ts.dev)) {
dev_err(&pdev->dev, "Could not allocate ts IRQ_TC !\n");
- free_irq(IRQ_ADC, ts.dev);
iounmap(base_addr);
ret = -EIO;
- goto bail4;
+ goto bail3;
}
dev_info(&pdev->dev, "Successfully loaded\n");
- /* All went ok, so register to the input system */
+ /* All went ok. Register to the input system. */
rc = input_register_device(ts.dev);
if (rc) {
+ dev_info(&pdev->dev, "Could not register input device\n");
ret = -EIO;
- goto bail5;
+ goto bail4;
}
return 0;
-bail5:
+bail4:
free_irq(IRQ_TC, ts.dev);
- free_irq(IRQ_ADC, ts.dev);
- clk_disable(adc_clock);
iounmap(base_addr);
disable_irq(IRQ_TC);
-bail4:
- disable_irq(IRQ_ADC);
bail3:
ts_filter_chain_destroy(ts.chain);
kfifo_free(ts.event_fifo);
@@ -473,17 +460,10 @@ bail0:
static int s3c2410ts_remove(struct platform_device *pdev)
{
- disable_irq(IRQ_ADC);
disable_irq(IRQ_TC);
- free_irq(IRQ_TC,ts.dev);
- free_irq(IRQ_ADC,ts.dev);
-
- if (adc_clock) {
- clk_disable(adc_clock);
- clk_put(adc_clock);
- adc_clock = NULL;
- }
+ free_irq(IRQ_TC, ts.dev);
+ s3c_adc_release(ts.adc_client);
input_unregister_device(ts.dev);
iounmap(base_addr);
@@ -495,45 +475,25 @@ static int s3c2410ts_remove(struct platform_device *pdev)
}
#ifdef CONFIG_PM
+
+#define TSC_SLEEP (S3C2410_ADCTSC_PULL_UP_DISABLE | \
+ S3C2410_ADCTSC_XY_PST(0))
+
static int s3c2410ts_suspend(struct platform_device *pdev, pm_message_t state)
{
- writel(TSC_SLEEP, base_addr+S3C2410_ADCTSC);
- writel(readl(base_addr+S3C2410_ADCCON) | S3C2410_ADCCON_STDBM,
- base_addr+S3C2410_ADCCON);
-
- disable_irq(IRQ_ADC);
+ writel(TSC_SLEEP, base_addr + S3C2410_ADCTSC);
+ writel(readl(base_addr + S3C2410_ADCCON) | S3C2410_ADCCON_STDBM,
+ base_addr + S3C2410_ADCCON);
disable_irq(IRQ_TC);
- clk_disable(adc_clock);
-
return 0;
}
static int s3c2410ts_resume(struct platform_device *pdev)
{
- struct s3c2410_ts_mach_info *info =
- ( struct s3c2410_ts_mach_info *)pdev->dev.platform_data;
-
- clk_enable(adc_clock);
- mdelay(1);
-
ts_filter_chain_clear(ts.chain);
-
- enable_irq(IRQ_ADC);
enable_irq(IRQ_TC);
-
- if ((info->presc&0xff) > 0)
- writel(S3C2410_ADCCON_PRSCEN |
- S3C2410_ADCCON_PRSCVL(info->presc&0xFF),
- base_addr+S3C2410_ADCCON);
- else
- writel(0,base_addr+S3C2410_ADCCON);
-
- /* Initialise registers */
- if ((info->delay & 0xffff) > 0)
- writel(info->delay & 0xffff, base_addr+S3C2410_ADCDLY);
-
- writel(WAIT4INT(0), base_addr+S3C2410_ADCTSC);
+ writel(WAIT4INT(0), base_addr + S3C2410_ADCTSC);
return 0;
}
@@ -544,27 +504,25 @@ static int s3c2410ts_resume(struct platform_device *pdev)
#endif
static struct platform_driver s3c2410ts_driver = {
- .driver = {
- .name = "s3c2410-ts",
- .owner = THIS_MODULE,
- },
- .probe = s3c2410ts_probe,
- .remove = s3c2410ts_remove,
- .suspend = s3c2410ts_suspend,
- .resume = s3c2410ts_resume,
-
+ .driver = {
+ .name = "s3c2410-ts",
+ .owner = THIS_MODULE,
+ },
+ .probe = s3c2410ts_probe,
+ .remove = s3c2410ts_remove,
+ .suspend = s3c2410ts_suspend,
+ .resume = s3c2410ts_resume,
};
static struct platform_driver s3c2440ts_driver = {
- .driver = {
- .name = "s3c2440-ts",
- .owner = THIS_MODULE,
- },
- .probe = s3c2410ts_probe,
- .remove = s3c2410ts_remove,
- .suspend = s3c2410ts_suspend,
- .resume = s3c2410ts_resume,
-
+ .driver = {
+ .name = "s3c2440-ts",
+ .owner = THIS_MODULE,
+ },
+ .probe = s3c2410ts_probe,
+ .remove = s3c2410ts_remove,
+ .suspend = s3c2410ts_suspend,
+ .resume = s3c2410ts_resume,
};
static int __init s3c2410ts_init(void)
diff --git a/drivers/input/touchscreen/ts_filter.h b/drivers/input/touchscreen/ts_filter.h
index aac1e028d0b..632e5fb3f4e 100644
--- a/drivers/input/touchscreen/ts_filter.h
+++ b/drivers/input/touchscreen/ts_filter.h
@@ -4,7 +4,7 @@
/*
* Touchscreen filter.
*
- * (c) 2008,2009 Andy Green <andy@openmoko.com>
+ * (c) 2008,2009 Andy Green <andy@warmcat.com>
*/
#include <linux/platform_device.h>
diff --git a/drivers/input/touchscreen/ts_filter_chain.c b/drivers/input/touchscreen/ts_filter_chain.c
index a6346bdba3e..17793ace144 100644
--- a/drivers/input/touchscreen/ts_filter_chain.c
+++ b/drivers/input/touchscreen/ts_filter_chain.c
@@ -13,7 +13,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
- * Copyright (c) 2008,2009 Andy Green <andy@openmoko.com>
+ * Copyright (c) 2008,2009 Andy Green <andy@warmcat.com>
*/
#include <linux/kernel.h>
diff --git a/drivers/input/touchscreen/ts_filter_chain.h b/drivers/input/touchscreen/ts_filter_chain.h
index 806bffe6c99..065a6a026d2 100644
--- a/drivers/input/touchscreen/ts_filter_chain.h
+++ b/drivers/input/touchscreen/ts_filter_chain.h
@@ -4,7 +4,7 @@
/*
* Touchscreen filter chains.
*
- * (c) 2008,2009 Andy Green <andy@openmoko.com>
+ * (c) 2008,2009 Andy Green <andy@warmcat.com>
*/
#include "ts_filter.h"
diff --git a/drivers/input/touchscreen/ts_filter_group.c b/drivers/input/touchscreen/ts_filter_group.c
index b7c3f3ddcb9..722e8dfbdae 100644
--- a/drivers/input/touchscreen/ts_filter_group.c
+++ b/drivers/input/touchscreen/ts_filter_group.c
@@ -20,29 +20,39 @@
*
* This filter is useful to reject samples that are not reliable. We consider
* that a sample is not reliable if it deviates form the Majority.
+ * This filter mixes information from all the available dimensions. It means
+ * that for two dimensions we draw a rectangle where the thought-to-be good
+ * points can be found.
*
- * 1) We collect S samples.
+ * The implementation would be more efficient with a double-linked list but
+ * let's keep it simple for now.
*
- * 2) For each dimension:
- *
- * - We sort the points.
+ * 1) We collect S samples and keep it in sorted sets.
* - Points that are "close enough" are considered to be in the same set.
- * - We choose the set with more elements. If more than "threshold"
- * points are in this set we use the first and the last point of the set
- * to define the valid range for this dimension [min, max], otherwise we
- * discard all the points and go to step 1.
+ * We don't actually keep the sets but ranges of points.
+ *
+ * 2) For each dimension:
+ * - We choose the range with more elements. If more than "threshold"
+ * points are in this range we use the minimum and the maximum point
+ * of the range to define the valid range for this dimension [min, max],
+ * otherwise we discard all the points and the ranges and go to step 1.
*
* 3) We consider the unsorted S samples and try to feed them to the next
* filter in the chain. If one of the points of each sample
- * is not in the allowed range for its dimension, we discard the sample.
+ * is not in the allowed range for its dimension we discard the sample.
*
*/
#include <linux/kernel.h>
#include <linux/slab.h>
-#include <linux/sort.h>
#include "ts_filter_group.h"
+struct coord_range {
+ int min; /* Minimum value of the range. */
+ int max; /* Maximum value of the range */
+ int N; /* Number of points in the range. */
+};
+
struct ts_filter_group {
/* Private filter configuration. */
struct ts_filter_group_configuration *config;
@@ -52,13 +62,15 @@ struct ts_filter_group {
int N; /* How many samples we have. */
int *samples[MAX_TS_FILTER_COORDS]; /* The samples: our input. */
- int *group_size; /* Used for temporal computations. */
- int *sorted_samples; /* Used for temporal computations. */
+ /* Temporal values that help us compute range_min and range_max. */
+ struct coord_range *ranges[MAX_TS_FILTER_COORDS]; /* Ranges. */
+ int n_ranges[MAX_TS_FILTER_COORDS]; /* Number of ranges */
+ /* Computed ranges that help us filter the points. */
int range_max[MAX_TS_FILTER_COORDS]; /* Max. computed ranges. */
int range_min[MAX_TS_FILTER_COORDS]; /* Min. computed ranges. */
- int tries_left; /* We finish if we don't get enough samples. */
+ int tries_left; /* We finish if we can't get enough samples. */
int ready; /* If we are ready to deliver samples. */
int result; /* Index of the point being returned. */
};
@@ -70,10 +82,13 @@ struct ts_filter_group {
static void ts_filter_group_clear_internal(struct ts_filter_group *tsfg,
int attempts)
{
+ int n;
tsfg->N = 0;
tsfg->tries_left = attempts;
tsfg->ready = 0;
tsfg->result = 0;
+ for (n = 0; n < tsfg->tsf.count_coords; n++)
+ tsfg->n_ranges[n] = 0;
}
static void ts_filter_group_clear(struct ts_filter *tsf)
@@ -101,8 +116,9 @@ static struct ts_filter *ts_filter_group_create(
tsfg->tsf.count_coords = count_coords;
BUG_ON(tsfg->config->attempts <= 0);
+ BUG_ON(tsfg->config->length < tsfg->config->threshold);
- tsfg->samples[0] = kmalloc((2 + count_coords) * sizeof(int) *
+ tsfg->samples[0] = kmalloc(count_coords * sizeof(int) *
tsfg->config->length, GFP_KERNEL);
if (!tsfg->samples[0]) {
kfree(tsfg);
@@ -110,10 +126,16 @@ static struct ts_filter *ts_filter_group_create(
}
for (i = 1; i < count_coords; ++i)
tsfg->samples[i] = tsfg->samples[0] + i * tsfg->config->length;
- tsfg->sorted_samples = tsfg->samples[0] + count_coords *
- tsfg->config->length;
- tsfg->group_size = tsfg->samples[0] + (1 + count_coords) *
- tsfg->config->length;
+
+ tsfg->ranges[0] = kmalloc(count_coords * sizeof(struct coord_range) *
+ tsfg->config->length, GFP_KERNEL);
+ if (!tsfg->ranges[0]) {
+ kfree(tsfg->samples[0]);
+ kfree(tsfg);
+ return NULL;
+ }
+ for (i = 1; i < count_coords; ++i)
+ tsfg->ranges[i] = tsfg->ranges[0] + i * tsfg->config->length;
ts_filter_group_clear_internal(tsfg, tsfg->config->attempts);
@@ -128,77 +150,90 @@ static void ts_filter_group_destroy(struct ts_filter *tsf)
{
struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
- kfree(tsfg->samples[0]); /* first guy has pointer from kmalloc */
+ kfree(tsfg->samples[0]);
+ kfree(tsfg->ranges[0]);
kfree(tsf);
}
-static int int_cmp(const void *_a, const void *_b)
-{
- const int *a = _a;
- const int *b = _b;
+static void ts_filter_group_prepare_next(struct ts_filter *tsf);
- if (*a > *b)
- return 1;
- if (*a < *b)
- return -1;
- return 0;
-}
+#define MIN(a, b) ((a) < (b) ? (a) : (b))
+#define MAX(a, b) ((a) > (b) ? (a) : (b))
+#define IN_RANGE(c, r) ((c) >= (r).min - tsfg->config->close_enough && \
+ (c) <= (r).max + tsfg->config->close_enough)
-static void ts_filter_group_prepare_next(struct ts_filter *tsf);
+static void delete_spot(struct coord_range *v, int n, int size)
+{
+ int i;
+ for (i = n; i < size - 1; ++i)
+ v[i] = v[i + 1];
+}
static int ts_filter_group_process(struct ts_filter *tsf, int *coords)
{
struct ts_filter_group *tsfg = ts_filter_to_filter_group(tsf);
int n;
- int i;
+ int j;
BUG_ON(tsfg->N >= tsfg->config->length);
BUG_ON(tsfg->ready);
- for (n = 0; n < tsf->count_coords; n++)
- tsfg->samples[n][tsfg->N] = coords[n];
+ for (n = 0; n < tsfg->tsf.count_coords; n++) {
+ int i;
+ struct coord_range *range = tsfg->ranges[n];
+ int *n_ranges = &tsfg->n_ranges[n];
+ int found = 0;
- if (++tsfg->N < tsfg->config->length)
- return 0; /* We need more samples. */
+ tsfg->samples[n][tsfg->N] = coords[n];
- for (n = 0; n < tsfg->tsf.count_coords; n++) {
- int *v = tsfg->sorted_samples;
- int ngroups = 0;
- int best_size;
- int best_idx = 0;
- int idx = 0;
-
- memcpy(v, tsfg->samples[n], tsfg->N * sizeof(int));
- /*
- * FIXME: Remove this sort call. We already have the
- * algorithm for this modification. The filter will
- * need less points (about half) if there is not a
- * lot of noise. Right now we are doing a constant
- * amount of work no matter how much noise we are
- * dealing with.
- */
- sort(v, tsfg->N, sizeof(int), int_cmp, NULL);
-
- tsfg->group_size[0] = 1;
- for (i = 1; i < tsfg->N; ++i) {
- if (v[i] - v[i - 1] <= tsfg->config->close_enough)
- tsfg->group_size[ngroups]++;
- else
- tsfg->group_size[++ngroups] = 1;
+ for (i = 0; i < *n_ranges; ++i) {
+ if (IN_RANGE(coords[n], range[i])) {
+ range[i].min = MIN(range[i].min, coords[n]);
+ range[i].max = MAX(range[i].max, coords[n]);
+ range[i].N++;
+ found = 1;
+ break;
+ } else if (coords[n] <= range[i].min)
+ break; /* We need to insert a range. */
}
- ngroups++;
-
- best_size = tsfg->group_size[0];
- for (i = 1; i < ngroups; i++) {
- idx += tsfg->group_size[i - 1];
- if (best_size < tsfg->group_size[i]) {
- best_size = tsfg->group_size[i];
- best_idx = idx;
+ if (found) { /* We might need to melt ranges. */
+ if (i && range[i - 1].max + tsfg->config->close_enough
+ >= range[i].min) {
+ BUG_ON(range[i - 1].max >= range[i].max);
+ range[i - 1].max = range[i].max;
+ range[i - 1].N += range[i].N;
+ delete_spot(range, i, *n_ranges);
+ (*n_ranges)--;
+ i--;
+ }
+ if (i < *n_ranges - 1 && range[i + 1].min -
+ tsfg->config->close_enough <= range[i].max) {
+ range[i].max = range[i + 1].max;
+ range[i].N += range[i + 1].N;
+ delete_spot(range, i + 1, *n_ranges);
+ (*n_ranges)--;
}
+ } else {
+ BUG_ON((*n_ranges) >= tsfg->config->length);
+ (*n_ranges)++;
+ for (j = *n_ranges - 1; j > i; --j)
+ range[j] = range[j - 1];
+ range[i].N = 1;
+ range[i].min = coords[n];
+ range[i].max = coords[n];
}
+ }
- if (best_size < tsfg->config->threshold) {
- /* This set is not good enough for us. */
+ if (++tsfg->N < tsfg->config->length)
+ return 0;
+
+ for (n = 0; n < tsfg->tsf.count_coords; ++n) {
+ int best = 0;
+ for (j = 1; j < tsfg->n_ranges[n]; ++j)
+ if (tsfg->ranges[n][best].N < tsfg->ranges[n][j].N)
+ best = j;
+ if (tsfg->ranges[n][best].N < tsfg->config->threshold) {
+ /* This set of points is not good enough for us. */
if (--tsfg->tries_left) {
ts_filter_group_clear_internal
(tsfg, tsfg->tries_left);
@@ -207,9 +242,8 @@ static int ts_filter_group_process(struct ts_filter *tsf, int *coords)
}
return 1; /* We give up: error. */
}
-
- tsfg->range_min[n] = v[best_idx];
- tsfg->range_max[n] = v[best_idx + best_size - 1];
+ tsfg->range_min[n] = tsfg->ranges[n][best].min;
+ tsfg->range_max[n] = tsfg->ranges[n][best].max;
}
ts_filter_group_prepare_next(tsf);
diff --git a/drivers/input/touchscreen/ts_filter_mean.c b/drivers/input/touchscreen/ts_filter_mean.c
index 7621ded3ec8..0c604321713 100644
--- a/drivers/input/touchscreen/ts_filter_mean.c
+++ b/drivers/input/touchscreen/ts_filter_mean.c
@@ -14,7 +14,7 @@
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
* Copyright (c) 2008,2009
- * Andy Green <andy@openmoko.com>
+ * Andy Green <andy@warmcat.com>
* Nelson Castillo <arhuaco@freaks-unidos.net>
*
* Simple mean filter.
diff --git a/drivers/input/touchscreen/ts_filter_mean.h b/drivers/input/touchscreen/ts_filter_mean.h
index f5b5e4bbe10..80f9b215dff 100644
--- a/drivers/input/touchscreen/ts_filter_mean.h
+++ b/drivers/input/touchscreen/ts_filter_mean.h
@@ -9,7 +9,7 @@
* mean
*
* (c) 2008,2009
- * Andy Green <andy@openmoko.com>
+ * Andy Green <andy@warmcat.com>
* Nelson Castillo <arhuaco@freaks-unidos.net>
*/
diff --git a/drivers/input/touchscreen/ts_filter_median.c b/drivers/input/touchscreen/ts_filter_median.c
index b8a6206d1b7..6f8aae5941d 100644
--- a/drivers/input/touchscreen/ts_filter_median.c
+++ b/drivers/input/touchscreen/ts_filter_median.c
@@ -13,7 +13,7 @@
* along with this program; if not, write to the Free Software
* Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA
*
- * Copyright (c) 2008 Andy Green <andy@openmoko.com>
+ * Copyright (c) 2008 Andy Green <andy@warmcat.com>
*
*
* Median averaging stuff. We sort incoming raw samples into an array of
diff --git a/drivers/input/touchscreen/ts_filter_median.h b/drivers/input/touchscreen/ts_filter_median.h
index 1c19472e375..b13f361bb6a 100644
--- a/drivers/input/touchscreen/ts_filter_median.h
+++ b/drivers/input/touchscreen/ts_filter_median.h
@@ -8,7 +8,7 @@
*
* median
*
- * (c) 2008 Andy Green <andy@openmoko.com>
+ * (c) 2008 Andy Green <andy@warmcat.com>
*/
struct ts_filter_median_configuration {