diff options
79 files changed, 9955 insertions, 510 deletions
diff --git a/arch/powerpc/Kconfig b/arch/powerpc/Kconfig index d40844f9b04..66a3d8cee5c 100644 --- a/arch/powerpc/Kconfig +++ b/arch/powerpc/Kconfig @@ -166,6 +166,7 @@ config PPC_OF_PLATFORM_PCI source "init/Kconfig" +source "arch/powerpc/sysdev/Kconfig" source "arch/powerpc/platforms/Kconfig" menu "Kernel options" diff --git a/arch/powerpc/Kconfig.debug b/arch/powerpc/Kconfig.debug index d20ccf5f2ca..db7cc34c24d 100644 --- a/arch/powerpc/Kconfig.debug +++ b/arch/powerpc/Kconfig.debug @@ -225,7 +225,16 @@ config PPC_EARLY_DEBUG_44x depends on 44x help Select this to enable early debugging for IBM 44x chips via the - inbuilt serial port. + inbuilt serial port. If you enable this, ensure you set + PPC_EARLY_DEBUG_44x_PHYSLOW below to suit your target board. + +config PPC_EARLY_DEBUG_40x + bool "Early serial debugging for IBM/AMCC 40x CPUs" + depends on 40x + help + Select this to enable early debugging for IBM 40x chips via the + inbuilt serial port. This works on chips with a 16550 compatible + UART. Xilinx chips with uartlite cannot use this option. config PPC_EARLY_DEBUG_CPM bool "Early serial debugging for Freescale CPM-based serial ports" @@ -242,12 +251,20 @@ config PPC_EARLY_DEBUG_44x_PHYSLOW hex "Low 32 bits of early debug UART physical address" depends on PPC_EARLY_DEBUG_44x default "0x40000200" + help + You probably want 0x40000200 for ebony boards and + 0x40000300 for taishan config PPC_EARLY_DEBUG_44x_PHYSHIGH hex "EPRN of early debug UART physical address" depends on PPC_EARLY_DEBUG_44x default "0x1" +config PPC_EARLY_DEBUG_40x_PHYSADDR + hex "Early debug UART physical address" + depends on PPC_EARLY_DEBUG_40x + default "0xef600300" + config PPC_EARLY_DEBUG_CPM_ADDR hex "CPM UART early debug transmit descriptor address" depends on PPC_EARLY_DEBUG_CPM diff --git a/arch/powerpc/boot/4xx.c b/arch/powerpc/boot/4xx.c index 3d0e4f921f1..33f25b67134 100644 --- a/arch/powerpc/boot/4xx.c +++ b/arch/powerpc/boot/4xx.c @@ -22,16 +22,14 @@ #include "dcr.h" /* Read the 4xx SDRAM controller to get size of system memory. */ -void ibm4xx_fixup_memsize(void) +void ibm4xx_sdram_fixup_memsize(void) { int i; unsigned long memsize, bank_config; memsize = 0; for (i = 0; i < ARRAY_SIZE(sdram_bxcr); i++) { - mtdcr(DCRN_SDRAM0_CFGADDR, sdram_bxcr[i]); - bank_config = mfdcr(DCRN_SDRAM0_CFGDATA); - + bank_config = SDRAM0_READ(sdram_bxcr[i]); if (bank_config & SDRAM_CONFIG_BANK_ENABLE) memsize += SDRAM_CONFIG_BANK_SIZE(bank_config); } @@ -39,6 +37,69 @@ void ibm4xx_fixup_memsize(void) dt_fixup_memory(0, memsize); } +/* Read the 440SPe MQ controller to get size of system memory. */ +#define DCRN_MQ0_B0BAS 0x40 +#define DCRN_MQ0_B1BAS 0x41 +#define DCRN_MQ0_B2BAS 0x42 +#define DCRN_MQ0_B3BAS 0x43 + +static u64 ibm440spe_decode_bas(u32 bas) +{ + u64 base = ((u64)(bas & 0xFFE00000u)) << 2; + + /* open coded because I'm paranoid about invalid values */ + switch ((bas >> 4) & 0xFFF) { + case 0: + return 0; + case 0xffc: + return base + 0x000800000ull; + case 0xff8: + return base + 0x001000000ull; + case 0xff0: + return base + 0x002000000ull; + case 0xfe0: + return base + 0x004000000ull; + case 0xfc0: + return base + 0x008000000ull; + case 0xf80: + return base + 0x010000000ull; + case 0xf00: + return base + 0x020000000ull; + case 0xe00: + return base + 0x040000000ull; + case 0xc00: + return base + 0x080000000ull; + case 0x800: + return base + 0x100000000ull; + } + printf("Memory BAS value 0x%08x unsupported !\n", bas); + return 0; +} + +void ibm440spe_fixup_memsize(void) +{ + u64 banktop, memsize = 0; + + /* Ultimately, we should directly construct the memory node + * so we are able to handle holes in the memory address space + */ + banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B0BAS)); + if (banktop > memsize) + memsize = banktop; + banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B1BAS)); + if (banktop > memsize) + memsize = banktop; + banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B2BAS)); + if (banktop > memsize) + memsize = banktop; + banktop = ibm440spe_decode_bas(mfdcr(DCRN_MQ0_B3BAS)); + if (banktop > memsize) + memsize = banktop; + + dt_fixup_memory(0, memsize); +} + + /* 4xx DDR1/2 Denali memory controller support */ /* DDR0 registers */ #define DDR0_02 2 @@ -77,19 +138,13 @@ void ibm4xx_fixup_memsize(void) #define DDR_GET_VAL(val, mask, shift) (((val) >> (shift)) & (mask)) -static inline u32 mfdcr_sdram0(u32 reg) -{ - mtdcr(DCRN_SDRAM0_CFGADDR, reg); - return mfdcr(DCRN_SDRAM0_CFGDATA); -} - void ibm4xx_denali_fixup_memsize(void) { u32 val, max_cs, max_col, max_row; u32 cs, col, row, bank, dpath; unsigned long memsize; - val = mfdcr_sdram0(DDR0_02); + val = SDRAM0_READ(DDR0_02); if (!DDR_GET_VAL(val, DDR_START, DDR_START_SHIFT)) fatal("DDR controller is not initialized\n"); @@ -99,7 +154,7 @@ void ibm4xx_denali_fixup_memsize(void) max_row = DDR_GET_VAL(val, DDR_MAX_ROW_REG, DDR_MAX_ROW_REG_SHIFT); /* get CS value */ - val = mfdcr_sdram0(DDR0_10); + val = SDRAM0_READ(DDR0_10); val = DDR_GET_VAL(val, DDR_CS_MAP, DDR_CS_MAP_SHIFT); cs = 0; @@ -115,7 +170,7 @@ void ibm4xx_denali_fixup_memsize(void) fatal("DDR wrong CS configuration\n"); /* get data path bytes */ - val = mfdcr_sdram0(DDR0_14); + val = SDRAM0_READ(DDR0_14); if (DDR_GET_VAL(val, DDR_REDUC, DDR_REDUC_SHIFT)) dpath = 8; /* 64 bits */ @@ -123,7 +178,7 @@ void ibm4xx_denali_fixup_memsize(void) dpath = 4; /* 32 bits */ /* get address pins (rows) */ - val = mfdcr_sdram0(DDR0_42); + val = SDRAM0_READ(DDR0_42); row = DDR_GET_VAL(val, DDR_APIN, DDR_APIN_SHIFT); if (row > max_row) @@ -131,7 +186,7 @@ void ibm4xx_denali_fixup_memsize(void) row = max_row - row; /* get collomn size and banks */ - val = mfdcr_sdram0(DDR0_43); + val = SDRAM0_READ(DDR0_43); col = DDR_GET_VAL(val, DDR_COL_SZ, DDR_COL_SZ_SHIFT); if (col > max_col) @@ -179,13 +234,17 @@ void ibm40x_dbcr_reset(void) #define EMAC_RESET 0x20000000 void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1) { - /* Quiesce the MAL and EMAC(s) since PIBS/OpenBIOS don't do this for us */ + /* Quiesce the MAL and EMAC(s) since PIBS/OpenBIOS don't + * do this for us + */ if (emac0) *emac0 = EMAC_RESET; if (emac1) *emac1 = EMAC_RESET; mtdcr(DCRN_MAL0_CFG, MAL_RESET); + while (mfdcr(DCRN_MAL0_CFG) & MAL_RESET) + ; /* loop until reset takes effect */ } /* Read 4xx EBC bus bridge registers to get mappings of the peripheral @@ -217,84 +276,268 @@ void ibm4xx_fixup_ebc_ranges(const char *ebc) setprop(devp, "ranges", ranges, (p - ranges) * sizeof(u32)); } -#define SPRN_CCR1 0x378 -void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk) +/* Calculate 440GP clocks */ +void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk) { - u32 cpu, plb, opb, ebc, tb, uart0, m, vco; - u32 reg; - u32 fwdva, fwdvb, fbdv, lfbdv, opbdv0, perdv0, spcid0, prbdv0, tmp; - - mtdcr(DCRN_CPR0_ADDR, CPR0_PLLD0); - reg = mfdcr(DCRN_CPR0_DATA); - tmp = (reg & 0x000F0000) >> 16; - fwdva = tmp ? tmp : 16; - tmp = (reg & 0x00000700) >> 8; - fwdvb = tmp ? tmp : 8; - tmp = (reg & 0x1F000000) >> 24; - fbdv = tmp ? tmp : 32; - lfbdv = (reg & 0x0000007F); - - mtdcr(DCRN_CPR0_ADDR, CPR0_OPBD0); - reg = mfdcr(DCRN_CPR0_DATA); - tmp = (reg & 0x03000000) >> 24; - opbdv0 = tmp ? tmp : 4; - - mtdcr(DCRN_CPR0_ADDR, CPR0_PERD0); - reg = mfdcr(DCRN_CPR0_DATA); - tmp = (reg & 0x07000000) >> 24; - perdv0 = tmp ? tmp : 8; - - mtdcr(DCRN_CPR0_ADDR, CPR0_PRIMBD0); - reg = mfdcr(DCRN_CPR0_DATA); - tmp = (reg & 0x07000000) >> 24; - prbdv0 = tmp ? tmp : 8; - - mtdcr(DCRN_CPR0_ADDR, CPR0_SCPID); - reg = mfdcr(DCRN_CPR0_DATA); - tmp = (reg & 0x03000000) >> 24; - spcid0 = tmp ? tmp : 4; - - /* Calculate M */ - mtdcr(DCRN_CPR0_ADDR, CPR0_PLLC0); - reg = mfdcr(DCRN_CPR0_DATA); - tmp = (reg & 0x03000000) >> 24; - if (tmp == 0) { /* PLL output */ - tmp = (reg & 0x20000000) >> 29; - if (!tmp) /* PLLOUTA */ - m = fbdv * lfbdv * fwdva; + u32 sys0 = mfdcr(DCRN_CPC0_SYS0); + u32 cr0 = mfdcr(DCRN_CPC0_CR0); + u32 cpu, plb, opb, ebc, tb, uart0, uart1, m; + u32 opdv = CPC0_SYS0_OPDV(sys0); + u32 epdv = CPC0_SYS0_EPDV(sys0); + + if (sys0 & CPC0_SYS0_BYPASS) { + /* Bypass system PLL */ + cpu = plb = sys_clk; + } else { + if (sys0 & CPC0_SYS0_EXTSL) + /* PerClk */ + m = CPC0_SYS0_FWDVB(sys0) * opdv * epdv; else - m = fbdv * lfbdv * fwdvb; + /* CPU clock */ + m = CPC0_SYS0_FBDV(sys0) * CPC0_SYS0_FWDVA(sys0); + cpu = sys_clk * m / CPC0_SYS0_FWDVA(sys0); + plb = sys_clk * m / CPC0_SYS0_FWDVB(sys0); } - else if (tmp == 1) /* CPU output */ - m = fbdv * fwdva; + + opb = plb / opdv; + ebc = opb / epdv; + + /* FIXME: Check if this is for all 440GP, or just Ebony */ + if ((mfpvr() & 0xf0000fff) == 0x40000440) + /* Rev. B 440GP, use external system clock */ + tb = sys_clk; else - m = perdv0 * opbdv0 * fwdvb; + /* Rev. C 440GP, errata force us to use internal clock */ + tb = cpu; - vco = (m * sysclk) + (m >> 1); - cpu = vco / fwdva; - plb = vco / fwdvb / prbdv0; - opb = plb / opbdv0; - ebc = plb / perdv0; + if (cr0 & CPC0_CR0_U0EC) + /* External UART clock */ + uart0 = ser_clk; + else + /* Internal UART clock */ + uart0 = plb / CPC0_CR0_UDIV(cr0); + + if (cr0 & CPC0_CR0_U1EC) + /* External UART clock */ + uart1 = ser_clk; + else + /* Internal UART clock */ + uart1 = plb / CPC0_CR0_UDIV(cr0); + + printf("PPC440GP: SysClk = %dMHz (%x)\n\r", + (sys_clk + 500000) / 1000000, sys_clk); + + dt_fixup_cpu_clocks(cpu, tb, 0); - /* FIXME */ - uart0 = ser_clk; + dt_fixup_clock("/plb", plb); + dt_fixup_clock("/plb/opb", opb); + dt_fixup_clock("/plb/opb/ebc", ebc); + dt_fixup_clock("/plb/opb/serial@40000200", uart0); + dt_fixup_clock("/plb/opb/serial@40000300", uart1); +} + +#define SPRN_CCR1 0x378 + +static inline u32 __fix_zero(u32 v, u32 def) +{ + return v ? v : def; +} + +static unsigned int __ibm440eplike_fixup_clocks(unsigned int sys_clk, + unsigned int tmr_clk, + int per_clk_from_opb) +{ + /* PLL config */ + u32 pllc = CPR0_READ(DCRN_CPR0_PLLC); + u32 plld = CPR0_READ(DCRN_CPR0_PLLD); + + /* Dividers */ + u32 fbdv = __fix_zero((plld >> 24) & 0x1f, 32); + u32 fwdva = __fix_zero((plld >> 16) & 0xf, 16); + u32 fwdvb = __fix_zero((plld >> 8) & 7, 8); + u32 lfbdv = __fix_zero(plld & 0x3f, 64); + u32 pradv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PRIMAD) >> 24) & 7, 8); + u32 prbdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PRIMBD) >> 24) & 7, 8); + u32 opbdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_OPBD) >> 24) & 3, 4); + u32 perdv0 = __fix_zero((CPR0_READ(DCRN_CPR0_PERD) >> 24) & 3, 4); + + /* Input clocks for primary dividers */ + u32 clk_a, clk_b; + + /* Resulting clocks */ + u32 cpu, plb, opb, ebc, vco; + + /* Timebase */ + u32 ccr1, tb = tmr_clk; + + if (pllc & 0x40000000) { + u32 m; + + /* Feedback path */ + switch ((pllc >> 24) & 7) { + case 0: + /* PLLOUTx */ + m = ((pllc & 0x20000000) ? fwdvb : fwdva) * lfbdv; + break; + case 1: + /* CPU */ + m = fwdva * pradv0; + break; + case 5: + /* PERClk */ + m = fwdvb * prbdv0 * opbdv0 * perdv0; + break; + default: + printf("WARNING ! Invalid PLL feedback source !\n"); + goto bypass; + } + m *= fbdv; + vco = sys_clk * m; + clk_a = vco / fwdva; + clk_b = vco / fwdvb; + } else { +bypass: + /* Bypass system PLL */ + vco = 0; + clk_a = clk_b = sys_clk; + } + + cpu = clk_a / pradv0; + plb = clk_b / prbdv0; + opb = plb / opbdv0; + ebc = (per_clk_from_opb ? opb : plb) / perdv0; /* Figure out timebase. Either CPU or default TmrClk */ - asm volatile ( - "mfspr %0,%1\n" - : - "=&r"(reg) : "i"(SPRN_CCR1)); - if (reg & 0x0080) - tb = 25000000; /* TmrClk is 25MHz */ - else + ccr1 = mfspr(SPRN_CCR1); + + /* If passed a 0 tmr_clk, force CPU clock */ + if (tb == 0) { + ccr1 &= ~0x80u; + mtspr(SPRN_CCR1, ccr1); + } + if ((ccr1 & 0x0080) == 0) tb = cpu; dt_fixup_cpu_clocks(cpu, tb, 0); dt_fixup_clock("/plb", plb); dt_fixup_clock("/plb/opb", opb); dt_fixup_clock("/plb/opb/ebc", ebc); + + return plb; +} + +static void eplike_fixup_uart_clk(int index, const char *path, + unsigned int ser_clk, + unsigned int plb_clk) +{ + unsigned int sdr; + unsigned int clock; + + switch (index) { + case 0: + sdr = SDR0_READ(DCRN_SDR0_UART0); + break; + case 1: + sdr = SDR0_READ(DCRN_SDR0_UART1); + break; + case 2: + sdr = SDR0_READ(DCRN_SDR0_UART2); + break; + case 3: + sdr = SDR0_READ(DCRN_SDR0_UART3); + break; + default: + return; + } + + if (sdr & 0x00800000u) + clock = ser_clk; + else + clock = plb_clk / __fix_zero(sdr & 0xff, 256); + + dt_fixup_clock(path, clock); +} + +void ibm440ep_fixup_clocks(unsigned int sys_clk, + unsigned int ser_clk, + unsigned int tmr_clk) +{ + unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 0); + + /* serial clocks beed fixup based on int/ext */ + eplike_fixup_uart_clk(0, "/plb/opb/serial@ef600300", ser_clk, plb_clk); + eplike_fixup_uart_clk(1, "/plb/opb/serial@ef600400", ser_clk, plb_clk); + eplike_fixup_uart_clk(2, "/plb/opb/serial@ef600500", ser_clk, plb_clk); + eplike_fixup_uart_clk(3, "/plb/opb/serial@ef600600", ser_clk, plb_clk); +} + +void ibm440gx_fixup_clocks(unsigned int sys_clk, + unsigned int ser_clk, + unsigned int tmr_clk) +{ + unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1); + + /* serial clocks beed fixup based on int/ext */ + eplike_fixup_uart_clk(0, "/plb/opb/serial@40000200", ser_clk, plb_clk); + eplike_fixup_uart_clk(1, "/plb/opb/serial@40000300", ser_clk, plb_clk); +} + +void ibm440spe_fixup_clocks(unsigned int sys_clk, + unsigned int ser_clk, + unsigned int tmr_clk) +{ + unsigned int plb_clk = __ibm440eplike_fixup_clocks(sys_clk, tmr_clk, 1); + + /* serial clocks beed fixup based on int/ext */ + eplike_fixup_uart_clk(0, "/plb/opb/serial@10000200", ser_clk, plb_clk); + eplike_fixup_uart_clk(1, "/plb/opb/serial@10000300", ser_clk, plb_clk); + eplike_fixup_uart_clk(2, "/plb/opb/serial@10000600", ser_clk, plb_clk); +} + +void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk) +{ + u32 pllmr = mfdcr(DCRN_CPC0_PLLMR); + u32 cpc0_cr0 = mfdcr(DCRN_405_CPC0_CR0); + u32 cpc0_cr1 = mfdcr(DCRN_405_CPC0_CR1); + u32 cpu, plb, opb, ebc, tb, uart0, uart1, m; + u32 fwdv, fbdv, cbdv, opdv, epdv, udiv; + + fwdv = (8 - ((pllmr & 0xe0000000) >> 29)); + fbdv = (pllmr & 0x1e000000) >> 25; + cbdv = ((pllmr & 0x00060000) >> 17) + 1; + opdv = ((pllmr & 0x00018000) >> 15) + 1; + epdv = ((pllmr & 0x00001800) >> 13) + 2; + udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1; + + m = fwdv * fbdv * cbdv; + + cpu = sys_clk * m / fwdv; + plb = cpu / cbdv; + opb = plb / opdv; + ebc = plb / epdv; + + if (cpc0_cr0 & 0x80) + /* uart0 uses the external clock */ + uart0 = ser_clk; + else + uart0 = cpu / udiv; + + if (cpc0_cr0 & 0x40) + /* uart1 uses the external clock */ + uart1 = ser_clk; + else + uart1 = cpu / udiv; + + /* setup the timebase clock to tick at the cpu frequency */ + cpc0_cr1 = cpc0_cr1 & ~0x00800000; + mtdcr(DCRN_405_CPC0_CR1, cpc0_cr1); + tb = cpu; + + dt_fixup_cpu_clocks(cpu, tb, 0); + dt_fixup_clock("/plb", plb); + dt_fixup_clock("/plb/opb", opb); + dt_fixup_clock("/plb/ebc", ebc); dt_fixup_clock("/plb/opb/serial@ef600300", uart0); - dt_fixup_clock("/plb/opb/serial@ef600400", uart0); - dt_fixup_clock("/plb/opb/serial@ef600500", uart0); - dt_fixup_clock("/plb/opb/serial@ef600600", uart0); + dt_fixup_clock("/plb/opb/serial@ef600400", uart1); } + diff --git a/arch/powerpc/boot/4xx.h b/arch/powerpc/boot/4xx.h index adba6a599a9..fbe0632621c 100644 --- a/arch/powerpc/boot/4xx.h +++ b/arch/powerpc/boot/4xx.h @@ -11,12 +11,21 @@ #ifndef _POWERPC_BOOT_4XX_H_ #define _POWERPC_BOOT_4XX_H_ -void ibm4xx_fixup_memsize(void); +void ibm4xx_sdram_fixup_memsize(void); +void ibm440spe_fixup_memsize(void); void ibm4xx_denali_fixup_memsize(void); void ibm44x_dbcr_reset(void); void ibm40x_dbcr_reset(void); void ibm4xx_quiesce_eth(u32 *emac0, u32 *emac1); void ibm4xx_fixup_ebc_ranges(const char *ebc); -void ibm440ep_fixup_clocks(unsigned int sysclk, unsigned int ser_clk); + +void ibm405gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk); +void ibm440gp_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk); +void ibm440ep_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk, + unsigned int tmr_clk); +void ibm440gx_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk, + unsigned int tmr_clk); +void ibm440spe_fixup_clocks(unsigned int sys_clk, unsigned int ser_clk, + unsigned int tmr_clk); #endif /* _POWERPC_BOOT_4XX_H_ */ diff --git a/arch/powerpc/boot/Makefile b/arch/powerpc/boot/Makefile index 9149bb8ed03..d1e625c073b 100644 --- a/arch/powerpc/boot/Makefile +++ b/arch/powerpc/boot/Makefile @@ -37,8 +37,11 @@ BOOTCFLAGS += -I$(obj) -I$(srctree)/$(obj) -I$(srctree)/$(src)/libfdt $(obj)/4xx.o: BOOTCFLAGS += -mcpu=440 $(obj)/ebony.o: BOOTCFLAGS += -mcpu=440 +$(obj)/cuboot-taishan.o: BOOTCFLAGS += -mcpu=440 +$(obj)/cuboot-katmai.o: BOOTCFLAGS += -mcpu=440 $(obj)/treeboot-walnut.o: BOOTCFLAGS += -mcpu=405 + zlib := inffast.c inflate.c inftrees.c zlibheader := inffast.h inffixed.h inflate.h inftrees.h infutil.h zliblinuxheader := zlib.h zconf.h zutil.h @@ -58,7 +61,8 @@ src-plat := of.c cuboot-52xx.c cuboot-83xx.c cuboot-85xx.c holly.c \ cuboot-ebony.c treeboot-ebony.c prpmc2800.c \ ps3-head.S ps3-hvcall.S ps3.c treeboot-bamboo.c cuboot-8xx.c \ cuboot-pq2.c cuboot-sequoia.c treeboot-walnut.c cuboot-bamboo.c \ - fixed-head.S ep88xc.c cuboot-hpc2.c + fixed-head.S ep88xc.c cuboot-hpc2.c ep405.c cuboot-taishan.c \ + cuboot-katmai.c cuboot-rainier.c src-boot := $(src-wlib) $(src-plat) empty.c src-boot := $(addprefix $(obj)/, $(src-boot)) @@ -189,6 +193,7 @@ image-$(CONFIG_DEFAULT_UIMAGE) += uImage ifneq ($(CONFIG_DEVICE_TREE),"") image-$(CONFIG_PPC_8xx) += cuImage.8xx image-$(CONFIG_PPC_EP88XC) += zImage.ep88xc +image-$(CONFIG_EP405) += zImage.ep405 image-$(CONFIG_8260) += cuImage.pq2 image-$(CONFIG_PPC_MPC52xx) += cuImage.52xx image-$(CONFIG_PPC_83xx) += cuImage.83xx @@ -197,7 +202,10 @@ image-$(CONFIG_MPC7448HPC2) += cuImage.hpc2 image-$(CONFIG_EBONY) += treeImage.ebony cuImage.ebony image-$(CONFIG_BAMBOO) += treeImage.bamboo cuImage.bamboo image-$(CONFIG_SEQUOIA) += cuImage.sequoia +image-$(CONFIG_RAINIER) += cuImage.rainier image-$(CONFIG_WALNUT) += treeImage.walnut +image-$(CONFIG_TAISHAN) += cuImage.taishan +image-$(CONFIG_KATMAI) += cuImage.katmai endif # For 32-bit powermacs, build the COFF and miboot images diff --git a/arch/powerpc/boot/bamboo.c b/arch/powerpc/boot/bamboo.c index e634359d98e..54b33f1500e 100644 --- a/arch/powerpc/boot/bamboo.c +++ b/arch/powerpc/boot/bamboo.c @@ -30,8 +30,8 @@ static void bamboo_fixups(void) { unsigned long sysclk = 33333333; - ibm440ep_fixup_clocks(sysclk, 11059200); - ibm4xx_fixup_memsize(); + ibm440ep_fixup_clocks(sysclk, 11059200, 25000000); + ibm4xx_sdram_fixup_memsize(); ibm4xx_quiesce_eth((u32 *)0xef600e00, (u32 *)0xef600f00); dt_fixup_mac_addresses(bamboo_mac0, bamboo_mac1); } diff --git a/arch/powerpc/boot/cuboot-katmai.c b/arch/powerpc/boot/cuboot-katmai.c new file mode 100644 index 00000000000..c021167f938 --- /dev/null +++ b/arch/powerpc/boot/cuboot-katmai.c @@ -0,0 +1,56 @@ +/* + * Old U-boot compatibility for Katmai + * + * Author: Hugh Blemings <hugh@au.ibm.com> + * + * Copyright 2007 Hugh Blemings, IBM Corporation. + * Based on cuboot-ebony.c which is: + * Copyright 2007 David Gibson, IBM Corporation. + * Based on cuboot-83xx.c, which is: + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "reg.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + +BSS_STACK(4096); + +static void katmai_fixups(void) +{ + unsigned long sysclk = 33333000; + + /* 440SP Clock logic is all but identical to 440GX + * so we just use that code for now at least + */ + ibm440spe_fixup_clocks(sysclk, 6 * 1843200, 0); + + ibm440spe_fixup_memsize(); + + dt_fixup_mac_address(0, bd.bi_enetaddr); + + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + + platform_ops.fixups = katmai_fixups; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/cuboot-rainier.c b/arch/powerpc/boot/cuboot-rainier.c new file mode 100644 index 00000000000..cf452b66dce --- /dev/null +++ b/arch/powerpc/boot/cuboot-rainier.c @@ -0,0 +1,56 @@ +/* + * Old U-boot compatibility for Rainier + * + * Valentine Barshak <vbarshak@ru.mvista.com> + * Copyright 2007 MontaVista Software, Inc + * + * Based on Ebony code by David Gibson <david@gibson.dropbear.id.au> + * Copyright IBM Corporation, 2007 + * + * Based on Bamboo code by Josh Boyer <jwboyer@linux.vnet.ibm.com> + * Copyright IBM Corporation, 2007 + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; version 2 of the License + */ + +#include <stdarg.h> +#include <stddef.h> +#include "types.h" +#include "elf.h" +#include "string.h" +#include "stdio.h" +#include "page.h" +#include "ops.h" +#include "dcr.h" +#include "4xx.h" +#include "44x.h" +#include "cuboot.h" + +#define TARGET_4xx +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + + +static void rainier_fixups(void) +{ + unsigned long sysclk = 33333333; + + ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); + ibm4xx_denali_fixup_memsize(); + dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + platform_ops.fixups = rainier_fixups; + platform_ops.exit = ibm44x_dbcr_reset; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/cuboot-sequoia.c b/arch/powerpc/boot/cuboot-sequoia.c index cf78260fcf3..f555575a44d 100644 --- a/arch/powerpc/boot/cuboot-sequoia.c +++ b/arch/powerpc/boot/cuboot-sequoia.c @@ -39,7 +39,7 @@ static void sequoia_fixups(void) { unsigned long sysclk = 33333333; - ibm440ep_fixup_clocks(sysclk, 11059200); + ibm440ep_fixup_clocks(sysclk, 11059200, 50000000); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); ibm4xx_denali_fixup_memsize(); dt_fixup_mac_addresses(&bd.bi_enetaddr, &bd.bi_enet1addr); diff --git a/arch/powerpc/boot/cuboot-taishan.c b/arch/powerpc/boot/cuboot-taishan.c new file mode 100644 index 00000000000..f66455a45ab --- /dev/null +++ b/arch/powerpc/boot/cuboot-taishan.c @@ -0,0 +1,54 @@ +/* + * Old U-boot compatibility for Taishan + * + * Author: Hugh Blemings <hugh@au.ibm.com> + * + * Copyright 2007 Hugh Blemings, IBM Corporation. + * Based on cuboot-ebony.c which is: + * Copyright 2007 David Gibson, IBM Corporation. + * Based on cuboot-83xx.c, which is: + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "cuboot.h" +#include "reg.h" +#include "dcr.h" +#include "4xx.h" + +#define TARGET_44x +#include "ppcboot.h" + +static bd_t bd; + +BSS_STACK(4096); + +static void taishan_fixups(void) +{ + /* FIXME: sysclk should be derived by reading the FPGA + registers */ + unsigned long sysclk = 33000000; + + ibm440gx_fixup_clocks(sysclk, 6 * 1843200, 25000000); + + ibm4xx_sdram_fixup_memsize(); + + dt_fixup_mac_addresses(bd.bi_enetaddr, bd.bi_enet1addr); + + ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + CUBOOT_INIT(); + + platform_ops.fixups = taishan_fixups; + fdt_init(_dtb_start); + serial_console_init(); +} diff --git a/arch/powerpc/boot/dcr.h b/arch/powerpc/boot/dcr.h index 83b88aa9288..55655f78505 100644 --- a/arch/powerpc/boot/dcr.h +++ b/arch/powerpc/boot/dcr.h @@ -14,12 +14,20 @@ #define DCRN_SDRAM0_CFGADDR 0x010 #define DCRN_SDRAM0_CFGDATA 0x011 +#define SDRAM0_READ(offset) ({\ + mtdcr(DCRN_SDRAM0_CFGADDR, offset); \ + mfdcr(DCRN_SDRAM0_CFGDATA); }) +#define SDRAM0_WRITE(offset, data) ({\ + mtdcr(DCRN_SDRAM0_CFGADDR, offset); \ + mtdcr(DCRN_SDRAM0_CFGDATA, data); }) + #define SDRAM0_B0CR 0x40 #define SDRAM0_B1CR 0x44 #define SDRAM0_B2CR 0x48 #define SDRAM0_B3CR 0x4c -static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, SDRAM0_B2CR, SDRAM0_B3CR }; +static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, + SDRAM0_B2CR, SDRAM0_B3CR }; #define SDRAM_CONFIG_BANK_ENABLE 0x00000001 #define SDRAM_CONFIG_SIZE_MASK 0x000e0000 @@ -139,4 +147,48 @@ static const unsigned long sdram_bxcr[] = { SDRAM0_B0CR, SDRAM0_B1CR, SDRAM0_B2C #define DCRN_405_CPC0_CR0 0xb1 #define DCRN_405_CPC0_CR1 0xb2 + +/* 440GX Clock control etc */ + + +#define DCRN_CPR0_CLKUPD 0x020 +#define DCRN_CPR0_PLLC 0x040 +#define DCRN_CPR0_PLLD 0x060 +#define DCRN_CPR0_PRIMAD 0x080 +#define DCRN_CPR0_PRIMBD 0x0a0 +#define DCRN_CPR0_OPBD 0x0c0 +#define DCRN_CPR0_PERD 0x0e0 +#define DCRN_CPR0_MALD 0x100 + +#define DCRN_SDR0_CONFIG_ADDR 0xe +#define DCRN_SDR0_CONFIG_DATA 0xf + +/* SDR read/write helper macros */ +#define SDR0_READ(offset) ({\ + mtdcr(DCRN_SDR0_CONFIG_ADDR, offset); \ + mfdcr(DCRN_SDR0_CONFIG_DATA); }) +#define SDR0_WRITE(offset, data) ({\ + mtdcr(DCRN_SDR0_CONFIG_ADDR, offset); \ + mtdcr(DCRN_SDR0_CONFIG_DATA, data); }) + +#define DCRN_SDR0_UART0 0x0120 +#define DCRN_SDR0_UART1 0x0121 +#define DCRN_SDR0_UART2 0x0122 +#define DCRN_SDR0_UART3 0x0123 + + +/* CPRs read/write helper macros - based off include/asm-ppc/ibm44x.h */ + +#define DCRN_CPR0_CFGADDR 0xc +#define DCRN_CPR0_CFGDATA 0xd + +#define CPR0_READ(offset) ({\ + mtdcr(DCRN_CPR0_CFGADDR, offset); \ + mfdcr(DCRN_CPR0_CFGDATA); }) +#define CPR0_WRITE(offset, data) ({\ + mtdcr(DCRN_CPR0_CFGADDR, offset); \ + mtdcr(DCRN_CPR0_CFGDATA, data); }) + + + #endif /* _PPC_BOOT_DCR_H_ */ diff --git a/arch/powerpc/boot/dts/bamboo.dts b/arch/powerpc/boot/dts/bamboo.dts index cb2fb50a281..29f1a6f3e37 100644 --- a/arch/powerpc/boot/dts/bamboo.dts +++ b/arch/powerpc/boot/dts/bamboo.dts @@ -16,14 +16,24 @@ #size-cells = <1>; model = "amcc,bamboo"; compatible = "amcc,bamboo"; - dcr-parent = <&/cpus/PowerPC,440EP@0>; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + serial3 = &UART3; + }; cpus { #address-cells = <1>; #size-cells = <0>; - PowerPC,440EP@0 { + cpu@0 { device_type = "cpu"; + model = "PowerPC,440EP"; reg = <0>; clock-frequency = <0>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ @@ -126,7 +136,6 @@ #address-cells = <2>; #size-cells = <1>; clock-frequency = <0>; /* Filled in by zImage */ - ranges; interrupts = <5 1>; interrupt-parent = <&UIC1>; }; @@ -238,11 +247,56 @@ zmii-device = <&ZMII0>; zmii-channel = <1>; }; + + usb@ef601000 { + compatible = "ohci-be"; + reg = <ef601000 80>; + interrupts = <8 1 9 1>; + interrupt-parent = < &UIC1 >; + }; + }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440ep-pci", "ibm,plb-pci"; + primary; + reg = <0 eec00000 8 /* Config space access */ + 0 eed00000 4 /* IACK */ + 0 eed00000 4 /* Special cycle */ + 0 ef400000 40>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <02000000 0 a0000000 0 a0000000 0 20000000 + 01000000 0 00000000 0 e8000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* Bamboo has all 4 IRQ pins tied together per slot */ + interrupt-map-mask = <f800 0 0 0>; + interrupt-map = < + /* IDSEL 1 */ + 0800 0 0 0 &UIC0 1c 8 + + /* IDSEL 2 */ + 1000 0 0 0 &UIC0 1b 8 + + /* IDSEL 3 */ + 1800 0 0 0 &UIC0 1a 8 + + /* IDSEL 4 */ + 2000 0 0 0 &UIC0 19 8 + >; }; }; chosen { linux,stdout-path = "/plb/opb/serial@ef600300"; - bootargs = "console=ttyS0,115200"; }; }; diff --git a/arch/powerpc/boot/dts/ebony.dts b/arch/powerpc/boot/dts/ebony.dts index bc259972aaa..f8790c4747d 100644 --- a/arch/powerpc/boot/dts/ebony.dts +++ b/arch/powerpc/boot/dts/ebony.dts @@ -16,14 +16,22 @@ #size-cells = <1>; model = "ibm,ebony"; compatible = "ibm,ebony"; - dcr-parent = <&/cpus/PowerPC,440GP@0>; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; cpus { #address-cells = <1>; #size-cells = <0>; - PowerPC,440GP@0 { + cpu@0 { device_type = "cpu"; + model = "PowerPC,440GP"; reg = <0>; clock-frequency = <0>; // Filled in by zImage timebase-frequency = <0>; // Filled in by zImage @@ -284,12 +292,43 @@ }; - PCIX0: pci@1234 { + PCIX0: pci@20ec00000 { device_type = "pci"; - /* FIXME */ - reg = <2 0ec00000 8 - 2 0ec80000 f0 - 2 0ec80100 fc>; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix"; + primary; + reg = <2 0ec00000 8 /* Config space access */ + 0 0 0 /* no IACK cycles */ + 2 0ed00000 4 /* Special cycles */ + 2 0ec80000 f0 /* Internal registers */ + 2 0ec80100 fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 00000003 80000000 0 80000000 + 01000000 0 00000000 00000002 08000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* Ebony has all 4 IRQ pins tied together per slot */ + interrupt-map-mask = <f800 0 0 0>; + interrupt-map = < + /* IDSEL 1 */ + 0800 0 0 0 &UIC0 17 8 + + /* IDSEL 2 */ + 1000 0 0 0 &UIC0 18 8 + + /* IDSEL 3 */ + 1800 0 0 0 &UIC0 19 8 + + /* IDSEL 4 */ + 2000 0 0 0 &UIC0 1a 8 + >; }; }; diff --git a/arch/powerpc/boot/dts/ep405.dts b/arch/powerpc/boot/dts/ep405.dts new file mode 100644 index 00000000000..92938557ac8 --- /dev/null +++ b/arch/powerpc/boot/dts/ep405.dts @@ -0,0 +1,228 @@ +/* + * Device Tree Source for EP405 + * + * Copyright 2007 IBM Corp. + * Benjamin Herrenschmidt <benh@kernel.crashing.org> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "ep405"; + compatible = "ep405"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405GP"; + reg = <0>; + clock-frequency = <bebc200>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <4000>; + d-cache-size = <4000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 9>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + plb { + compatible = "ibm,plb3"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + MAL: mcmal { + compatible = "ibm,mcmal-405gp", "ibm,mcmal"; + dcr-reg = <180 62>; + num-tx-chans = <1>; + num-rx-chans = <1>; + interrupt-parent = <&UIC0>; + interrupts = < + b 4 /* TXEOB */ + c 4 /* RXEOB */ + a 4 /* SERR */ + d 4 /* TXDE */ + e 4 /* RXDE */>; + }; + + POB0: opb { + compatible = "ibm,opb-405gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <ef600000 ef600000 a00000>; + dcr-reg = <0a0 5>; + clock-frequency = <0>; /* Filled in by zImage */ + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <2580>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <2580>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + IIC: i2c@ef600500 { + compatible = "ibm,iic-405gp", "ibm,iic"; + reg = <ef600500 11>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + GPIO: gpio@ef600700 { + compatible = "ibm,gpio-405gp"; + reg = <ef600700 20>; + }; + + EMAC: ethernet@ef600800 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-405gp", "ibm,emac"; + interrupt-parent = <&UIC0>; + interrupts = < + f 4 /* Ethernet */ + 9 4 /* Ethernet Wake Up */>; + local-mac-address = [000000000000]; /* Filled in by zImage */ + reg = <ef600800 70>; + mal-device = <&MAL>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000000>; + }; + + }; + + EBC0: ebc { + compatible = "ibm,ebc-405gp", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + + + /* The ranges property is supplied by the bootwrapper + * and is based on the firmware's configuration of the + * EBC bridge + */ + clock-frequency = <0>; /* Filled in by zImage */ + + /* NVRAM and RTC */ + nvrtc@4,200000 { + compatible = "ds1742"; + reg = <4 200000 0>; /* size fixed up by zImage */ + }; + + /* "BCSR" CPLD contains a PCI irq controller */ + bcsr@4,0 { + compatible = "ep405-bcsr"; + reg = <4 0 10>; + interrupt-controller; + /* Routing table */ + irq-routing = [ 00 /* SYSERR */ + 01 /* STTM */ + 01 /* RTC */ + 01 /* FENET */ + 02 /* NB PCIIRQ mux ? */ + 03 /* SB Winbond 8259 ? */ + 04 /* Serial Ring */ + 05 /* USB (ep405pc) */ + 06 /* XIRQ 0 */ + 06 /* XIRQ 1 */ + 06 /* XIRQ 2 */ + 06 /* XIRQ 3 */ + 06 /* XIRQ 4 */ + 06 /* XIRQ 5 */ + 06 /* XIRQ 6 */ + 07]; /* Reserved */ + }; + }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb405gp-pci", "ibm,plb-pci"; + primary; + reg = <eec00000 8 /* Config space access */ + eed80000 4 /* IACK */ + eed80000 4 /* Special cycle */ + ef480000 40>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e8000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 80000000>; + + /* That's all I know about IRQs on that thing ... */ + interrupt-map-mask = <f800 0 0 0>; + interrupt-map = < + /* USB */ + 7000 0 0 0 &UIC0 1e 8 /* IRQ5 */ + >; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + }; +}; diff --git a/arch/powerpc/boot/dts/katmai.dts b/arch/powerpc/boot/dts/katmai.dts new file mode 100644 index 00000000000..9bdfc0ff3c2 --- /dev/null +++ b/arch/powerpc/boot/dts/katmai.dts @@ -0,0 +1,400 @@ +/* + * Device Tree Source for AMCC Katmai eval board + * + * Copyright (c) 2006, 2007 IBM Corp. + * Benjamin Herrenschmidt <benh@kernel.crashing.org> + * + * Copyright (c) 2006, 2007 IBM Corp. + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,katmai"; + compatible = "amcc,katmai"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440SPe"; + reg = <0>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <20000>; + d-cache-size = <20000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0e0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <a 4 b 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC3: interrupt-controller3 { + compatible = "ibm,uic-440spe","ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <0f0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <10 4 11 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440spe"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440spe"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-440spe", "ibm,plb-440gp", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440spe", "ibm,sdram-405gp"; + dcr-reg = <010 2>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440spe", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <2>; + num-rx-chans = <1>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC1 6 4 + /*RXEOB*/ 1 &UIC1 7 4 + /*SERR*/ 2 &UIC1 1 4 + /*TXDE*/ 3 &UIC1 2 4 + /*RXDE*/ 4 &UIC1 3 4>; + }; + + POB0: opb { + compatible = "ibm,opb-440spe", "ibm,opb-440gp", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <00000000 4 e0000000 20000000>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440spe", "ibm,ebc-440gp", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + }; + + UART0: serial@10000200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <10000200 8>; + virtual-reg = <a0000200>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@10000300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <10000300 8>; + virtual-reg = <a0000300>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + + UART2: serial@10000600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <10000600 8>; + virtual-reg = <a0000600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <5 4>; + }; + + IIC0: i2c@10000400 { + device_type = "i2c"; + compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; + reg = <10000400 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@10000500 { + device_type = "i2c"; + compatible = "ibm,iic-440spe", "ibm,iic-440gp", "ibm,iic"; + reg = <10000500 14>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + }; + + EMAC0: ethernet@10000800 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-440spe", "ibm,emac4"; + interrupt-parent = <&UIC1>; + interrupts = <1c 4 1d 4>; + reg = <10000800 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "gmii"; + phy-map = <00000000>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCIX0: pci@c0ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pcix-440spe", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <c 0ec00000 8 /* Config space access */ + 0 0 0 /* no IACK cycles */ + c 0ed00000 4 /* Special cycles */ + c 0ec80000 100 /* Internal registers */ + c 0ec80100 fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000d 80000000 0 80000000 + 01000000 0 00000000 0000000c 08000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 0 to 0xf */ + bus-range = <0 f>; + + /* + * On Katmai, the following PCI-X interrupts signals + * have to be enabled via jumpers (only INTA is + * enabled per default): + * + * INTB: J3: 1-2 + * INTC: J2: 1-2 + * INTD: J1: 1-2 + */ + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 1 */ + 0800 0 0 1 &UIC1 14 8 + 0800 0 0 2 &UIC1 13 8 + 0800 0 0 3 &UIC1 12 8 + 0800 0 0 4 &UIC1 11 8 + >; + }; + + PCIE0: pciex@d00000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <0>; /* port number */ + reg = <d 00000000 20000000 /* Config space access */ + c 10000000 00001000>; /* Registers */ + dcr-reg = <100 020>; + sdr-base = <300>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000e 00000000 0 80000000 + 01000000 0 00000000 0000000f 80000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <10 1f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 0 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 1 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 2 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 3 4 /* swizzled int D */>; + }; + + PCIE1: pciex@d20000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <1>; /* port number */ + reg = <d 20000000 20000000 /* Config space access */ + c 10001000 00001000>; /* Registers */ + dcr-reg = <120 020>; + sdr-base = <340>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000e 80000000 0 80000000 + 01000000 0 00000000 0000000f 80010000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <20 2f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 4 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 5 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 6 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 7 4 /* swizzled int D */>; + }; + + PCIE2: pciex@d40000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-440spe", "ibm,plb-pciex"; + primary; + port = <2>; /* port number */ + reg = <d 40000000 20000000 /* Config space access */ + c 10002000 00001000>; /* Registers */ + dcr-reg = <140 020>; + sdr-base = <370>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 0000000f 00000000 0 80000000 + 01000000 0 00000000 0000000f 80020000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* This drives busses 10 to 0x1f */ + bus-range = <30 3f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC3 8 4 /* swizzled int A */ + 0000 0 0 2 &UIC3 9 4 /* swizzled int B */ + 0000 0 0 3 &UIC3 a 4 /* swizzled int C */ + 0000 0 0 4 &UIC3 b 4 /* swizzled int D */>; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@10000200"; + }; +}; diff --git a/arch/powerpc/boot/dts/kilauea.dts b/arch/powerpc/boot/dts/kilauea.dts index c824e8f0645..67c7ea179a0 100644 --- a/arch/powerpc/boot/dts/kilauea.dts +++ b/arch/powerpc/boot/dts/kilauea.dts @@ -13,14 +13,22 @@ #size-cells = <1>; model = "amcc,kilauea"; compatible = "amcc,kilauea"; - dcr-parent = <&/cpus/PowerPC,405EX@0>; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; cpus { #address-cells = <1>; #size-cells = <0>; - PowerPC,405EX@0 { + cpu@0 { device_type = "cpu"; + model = "PowerPC,405EX"; reg = <0>; clock-frequency = <0>; /* Filled in by U-Boot */ timebase-frequency = <0>; /* Filled in by U-Boot */ @@ -194,6 +202,7 @@ device_type = "rgmii-interface"; compatible = "ibm,rgmii-405ex", "ibm,rgmii"; reg = <ef600b00 104>; + has-mdio; }; EMAC0: ethernet@ef600900 { @@ -220,6 +229,8 @@ phy-map = <00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; }; EMAC1: ethernet@ef600a00 { @@ -246,7 +257,91 @@ phy-map = <00000000>; rgmii-device = <&RGMII0>; rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; }; }; + + PCIE0: pciex@0a0000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; + primary; + port = <0>; /* port number */ + reg = <a0000000 20000000 /* Config space access */ + ef000000 00001000>; /* Registers */ + dcr-reg = <040 020>; + sdr-base = <400>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 90000000 0 08000000 + 01000000 0 00000000 e0000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 80000000>; + + /* This drives busses 0x00 to 0x3f */ + bus-range = <00 3f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC2 0 4 /* swizzled int A */ + 0000 0 0 2 &UIC2 1 4 /* swizzled int B */ + 0000 0 0 3 &UIC2 2 4 /* swizzled int C */ + 0000 0 0 4 &UIC2 3 4 /* swizzled int D */>; + }; + + PCIE1: pciex@0c0000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; + primary; + port = <1>; /* port number */ + reg = <c0000000 20000000 /* Config space access */ + ef001000 00001000>; /* Registers */ + dcr-reg = <060 020>; + sdr-base = <440>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 98000000 0 08000000 + 01000000 0 00000000 e0010000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 80000000>; + + /* This drives busses 0x40 to 0x7f */ + bus-range = <40 7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC2 b 4 /* swizzled int A */ + 0000 0 0 2 &UIC2 c 4 /* swizzled int B */ + 0000 0 0 3 &UIC2 d 4 /* swizzled int C */ + 0000 0 0 4 &UIC2 e 4 /* swizzled int D */>; + }; }; }; diff --git a/arch/powerpc/boot/dts/makalu.dts b/arch/powerpc/boot/dts/makalu.dts new file mode 100644 index 00000000000..bdd70e4596a --- /dev/null +++ b/arch/powerpc/boot/dts/makalu.dts @@ -0,0 +1,347 @@ +/* + * Device Tree Source for AMCC Makalu (405EX) + * + * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <1>; + #size-cells = <1>; + model = "amcc,makalu"; + compatible = "amcc,makalu"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,405EX"; + reg = <0>; + clock-frequency = <0>; /* Filled in by U-Boot */ + timebase-frequency = <0>; /* Filled in by U-Boot */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <4000>; /* 16 kB */ + d-cache-size = <4000>; /* 16 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0>; /* Filled in by U-Boot */ + }; + + UIC0: interrupt-controller { + compatible = "ibm,uic-405ex", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-405ex","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0e0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1c 4 1d 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + plb { + compatible = "ibm,plb-405ex", "ibm,plb4"; + #address-cells = <1>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by U-Boot */ + + SDRAM0: memory-controller { + compatible = "ibm,sdram-405ex"; + dcr-reg = <010 2>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-405ex", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <2>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 2 4>; + interrupt-map-mask = <ffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-405ex", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <80000000 80000000 10000000 + ef600000 ef600000 a00000 + f0000000 f0000000 10000000>; + dcr-reg = <0a0 5>; + clock-frequency = <0>; /* Filled in by U-Boot */ + + EBC0: ebc { + compatible = "ibm,ebc-405ex", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by U-Boot */ + /* ranges property is supplied by U-Boot */ + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl512n", "cfi-flash"; + bank-width = <2>; + reg = <0 000000 4000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "kernel"; + reg = <0 200000>; + }; + partition@200000 { + label = "root"; + reg = <200000 200000>; + }; + partition@400000 { + label = "user"; + reg = <400000 3b60000>; + }; + partition@3f60000 { + label = "env"; + reg = <3f60000 40000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <3fa0000 60000>; + }; + }; + }; + + UART0: serial@ef600200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600200 8>; + virtual-reg = <ef600200>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1a 4>; + }; + + UART1: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by U-Boot */ + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + IIC0: i2c@ef600400 { + device_type = "i2c"; + compatible = "ibm,iic-405ex", "ibm,iic"; + reg = <ef600400 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600500 { + device_type = "i2c"; + compatible = "ibm,iic-405ex", "ibm,iic"; + reg = <ef600500 14>; + interrupt-parent = <&UIC0>; + interrupts = <7 4>; + }; + + + RGMII0: emac-rgmii@ef600b00 { + device_type = "rgmii-interface"; + compatible = "ibm,rgmii-405ex", "ibm,rgmii"; + reg = <ef600b00 104>; + has-mdio; + }; + + EMAC0: ethernet@ef600900 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-405ex", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC0 18 4 + /*Wake*/ 1 &UIC1 1d 4>; + reg = <ef600900 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <0000003f>; /* Start at 6 */ + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600a00 { + linux,network-index = <1>; + device_type = "network"; + compatible = "ibm,emac-405ex", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC0 19 4 + /*Wake*/ 1 &UIC1 1f 4>; + reg = <ef600a00 70>; + local-mac-address = [000000000000]; /* Filled in by U-Boot */ + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCIE0: pciex@0a0000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; + primary; + port = <0>; /* port number */ + reg = <a0000000 20000000 /* Config space access */ + ef000000 00001000>; /* Registers */ + dcr-reg = <040 020>; + sdr-base = <400>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 90000000 0 08000000 + 01000000 0 00000000 e0000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 80000000>; + + /* This drives busses 0x00 to 0x3f */ + bus-range = <00 3f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC2 0 4 /* swizzled int A */ + 0000 0 0 2 &UIC2 1 4 /* swizzled int B */ + 0000 0 0 3 &UIC2 2 4 /* swizzled int C */ + 0000 0 0 4 &UIC2 3 4 /* swizzled int D */>; + }; + + PCIE1: pciex@0c0000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb-pciex-405ex", "ibm,plb-pciex"; + primary; + port = <1>; /* port number */ + reg = <c0000000 20000000 /* Config space access */ + ef001000 00001000>; /* Registers */ + dcr-reg = <060 020>; + sdr-base = <440>; + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 98000000 0 08000000 + 01000000 0 00000000 e0010000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 80000000>; + + /* This drives busses 0x40 to 0x7f */ + bus-range = <40 7f>; + + /* Legacy interrupts (note the weird polarity, the bridge seems + * to invert PCIe legacy interrupts). + * We are de-swizzling here because the numbers are actually for + * port of the root complex virtual P2P bridge. But I want + * to avoid putting a node for it in the tree, so the numbers + * below are basically de-swizzled numbers. + * The real slot is on idsel 0, so the swizzling is 1:1 + */ + interrupt-map-mask = <0000 0 0 7>; + interrupt-map = < + 0000 0 0 1 &UIC2 b 4 /* swizzled int A */ + 0000 0 0 2 &UIC2 c 4 /* swizzled int B */ + 0000 0 0 3 &UIC2 d 4 /* swizzled int C */ + 0000 0 0 4 &UIC2 e 4 /* swizzled int D */>; + }; + }; +}; diff --git a/arch/powerpc/boot/dts/rainier.dts b/arch/powerpc/boot/dts/rainier.dts new file mode 100644 index 00000000000..d3c2ac394ce --- /dev/null +++ b/arch/powerpc/boot/dts/rainier.dts @@ -0,0 +1,353 @@ +/* + * Device Tree Source for AMCC Rainier + * + * Based on Sequoia code + * Copyright (c) 2007 MontaVista Software, Inc. + * + * FIXME: Draft only! + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,rainier"; + compatible = "amcc,rainier"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + serial3 = &UART3; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440GRx"; + reg = <0>; + clock-frequency = <0>; /* Filled in by zImage */ + timebase-frequency = <0>; /* Filled in by zImage */ + i-cache-line-size = <20>; + d-cache-line-size = <20>; + i-cache-size = <8000>; + d-cache-size = <8000>; + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; /* Filled in by zImage */ + }; + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440grx","ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440grx","ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1e 4 1f 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440grx","ibm,uic"; + interrupt-controller; + cell-index = <2>; + dcr-reg = <0e0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <1c 4 1d 4>; /* cascade */ + interrupt-parent = <&UIC0>; + }; + + SDR0: sdr { + compatible = "ibm,sdr-440grx", "ibm,sdr-440ep"; + dcr-reg = <00e 002>; + }; + + CPR0: cpr { + compatible = "ibm,cpr-440grx", "ibm,cpr-440ep"; + dcr-reg = <00c 002>; + }; + + plb { + compatible = "ibm,plb-440grx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <0>; /* Filled in by zImage */ + + SDRAM0: sdram { + compatible = "ibm,sdram-440grx", "ibm,sdram-44x-ddr2denali"; + dcr-reg = <010 2>; + }; + + DMA0: dma { + compatible = "ibm,dma-440grx", "ibm,dma-4xx"; + dcr-reg = <100 027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440grx", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <2>; + num-rx-chans = <2>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 2 4>; + interrupt-map-mask = <ffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-440grx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + ranges = <00000000 1 00000000 80000000 + 80000000 1 80000000 80000000>; + interrupt-parent = <&UIC1>; + interrupts = <7 4>; + clock-frequency = <0>; /* Filled in by zImage */ + + EBC0: ebc { + compatible = "ibm,ebc-440grx", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <0>; /* Filled in by zImage */ + interrupts = <5 1>; + interrupt-parent = <&UIC1>; + + nor_flash@0,0 { + compatible = "amd,s29gl256n", "cfi-flash"; + bank-width = <2>; + reg = <0 000000 4000000>; + #address-cells = <1>; + #size-cells = <1>; + partition@0 { + label = "Kernel"; + reg = <0 180000>; + }; + partition@180000 { + label = "ramdisk"; + reg = <180000 200000>; + }; + partition@380000 { + label = "file system"; + reg = <380000 3aa0000>; + }; + partition@3e20000 { + label = "kozio"; + reg = <3e20000 140000>; + }; + partition@3f60000 { + label = "env"; + reg = <3f60000 40000>; + }; + partition@3fa0000 { + label = "u-boot"; + reg = <3fa0000 60000>; + }; + }; + + }; + + UART0: serial@ef600300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600300 8>; + virtual-reg = <ef600300>; + clock-frequency = <0>; /* Filled in by zImage */ + current-speed = <1c200>; + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@ef600400 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600400 8>; + virtual-reg = <ef600400>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + UART2: serial@ef600500 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600500 8>; + virtual-reg = <ef600500>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <3 4>; + }; + + UART3: serial@ef600600 { + device_type = "serial"; + compatible = "ns16550"; + reg = <ef600600 8>; + virtual-reg = <ef600600>; + clock-frequency = <0>; + current-speed = <0>; + interrupt-parent = <&UIC1>; + interrupts = <4 4>; + }; + + IIC0: i2c@ef600700 { + device_type = "i2c"; + compatible = "ibm,iic-440grx", "ibm,iic"; + reg = <ef600700 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + + IIC1: i2c@ef600800 { + device_type = "i2c"; + compatible = "ibm,iic-440grx", "ibm,iic"; + reg = <ef600800 14>; + interrupt-parent = <&UIC0>; + interrupts = <7 4>; + }; + + ZMII0: emac-zmii@ef600d00 { + device_type = "zmii-interface"; + compatible = "ibm,zmii-440grx", "ibm,zmii"; + reg = <ef600d00 c>; + }; + + RGMII0: emac-rgmii@ef601000 { + device_type = "rgmii-interface"; + compatible = "ibm,rgmii-440grx", "ibm,rgmii"; + reg = <ef601000 8>; + has-mdio; + }; + + EMAC0: ethernet@ef600e00 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; + interrupt-parent = <&EMAC0>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC0 18 4 + /*Wake*/ 1 &UIC1 1d 4>; + reg = <ef600e00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + + EMAC1: ethernet@ef600f00 { + linux,network-index = <1>; + device_type = "network"; + compatible = "ibm,emac-440grx", "ibm,emac-440epx", "ibm,emac4"; + interrupt-parent = <&EMAC1>; + interrupts = <0 1>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*Status*/ 0 &UIC0 19 4 + /*Wake*/ 1 &UIC1 1f 4>; + reg = <ef600f00 70>; + local-mac-address = [000000000000]; + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000000>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + has-inverted-stacr-oc; + has-new-stacr-staopc; + }; + }; + + PCI0: pci@1ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440grx-pci", "ibm,plb-pci"; + primary; + reg = <1 eec00000 8 /* Config space access */ + 1 eed00000 4 /* IACK */ + 1 eed00000 4 /* Special cycle */ + 1 ef400000 40>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <02000000 0 80000000 1 80000000 0 10000000 + 01000000 0 00000000 1 e8000000 0 00100000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* All PCI interrupts are routed to IRQ 67 */ + interrupt-map-mask = <0000 0 0 0>; + interrupt-map = < 0000 0 0 0 &UIC2 3 8 >; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@ef600300"; + bootargs = "console=ttyS0,115200"; + }; +}; diff --git a/arch/powerpc/boot/dts/sequoia.dts b/arch/powerpc/boot/dts/sequoia.dts index 10784ff45dd..d9046c1adcb 100644 --- a/arch/powerpc/boot/dts/sequoia.dts +++ b/arch/powerpc/boot/dts/sequoia.dts @@ -17,14 +17,24 @@ #size-cells = <1>; model = "amcc,sequoia"; compatible = "amcc,sequoia"; - dcr-parent = <&/cpus/PowerPC,440EPx@0>; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC0; + ethernet1 = &EMAC1; + serial0 = &UART0; + serial1 = &UART1; + serial2 = &UART2; + serial3 = &UART3; + }; cpus { #address-cells = <1>; #size-cells = <0>; - PowerPC,440EPx@0 { + cpu@0 { device_type = "cpu"; + model = "PowerPC,440EPx"; reg = <0>; clock-frequency = <0>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ @@ -94,7 +104,6 @@ clock-frequency = <0>; /* Filled in by zImage */ SDRAM0: sdram { - device_type = "memory-controller"; compatible = "ibm,sdram-440epx", "ibm,sdram-44x-ddr2denali"; dcr-reg = <010 2>; }; @@ -122,6 +131,13 @@ interrupt-map-mask = <ffffffff>; }; + USB1: usb@e0000400 { + compatible = "ohci-be"; + reg = <0 e0000400 60>; + interrupt-parent = <&UIC0>; + interrupts = <15 8>; + }; + POB0: opb { compatible = "ibm,opb-440epx", "ibm,opb"; #address-cells = <1>; @@ -308,6 +324,33 @@ has-new-stacr-staopc; }; }; + + PCI0: pci@1ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440epx-pci", "ibm,plb-pci"; + primary; + reg = <1 eec00000 8 /* Config space access */ + 1 eed00000 4 /* IACK */ + 1 eed00000 4 /* Special cycle */ + 1 ef400000 40>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <02000000 0 80000000 1 80000000 0 10000000 + 01000000 0 00000000 1 e8000000 0 00100000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + /* All PCI interrupts are routed to IRQ 67 */ + interrupt-map-mask = <0000 0 0 0>; + interrupt-map = < 0000 0 0 0 &UIC2 3 8 >; + }; }; chosen { diff --git a/arch/powerpc/boot/dts/taishan.dts b/arch/powerpc/boot/dts/taishan.dts new file mode 100644 index 00000000000..0706a4a13b9 --- /dev/null +++ b/arch/powerpc/boot/dts/taishan.dts @@ -0,0 +1,383 @@ +/* + * Device Tree Source for IBM/AMCC Taishan + * + * Copyright 2007 IBM Corp. + * Hugh Blemings <hugh@au.ibm.com> based off code by + * Josh Boyer <jwboyer@linux.vnet.ibm.com>, David Gibson <dwg@au1.ibm.com> + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + */ + +/ { + #address-cells = <2>; + #size-cells = <1>; + model = "amcc,taishan"; + compatible = "amcc,taishan"; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC2; + ethernet1 = &EMAC3; + serial0 = &UART0; + serial1 = &UART1; + }; + + cpus { + #address-cells = <1>; + #size-cells = <0>; + + cpu@0 { + device_type = "cpu"; + model = "PowerPC,440GX"; + reg = <0>; + clock-frequency = <2FAF0800>; // 800MHz + timebase-frequency = <0>; // Filled in by zImage + i-cache-line-size = <32>; + d-cache-line-size = <32>; + i-cache-size = <8000>; /* 32 kB */ + d-cache-size = <8000>; /* 32 kB */ + dcr-controller; + dcr-access-method = "native"; + }; + }; + + memory { + device_type = "memory"; + reg = <0 0 0>; // Filled in by zImage + }; + + + UICB0: interrupt-controller-base { + compatible = "ibm,uic-440gx", "ibm,uic"; + interrupt-controller; + cell-index = <3>; + dcr-reg = <200 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + }; + + + UIC0: interrupt-controller0 { + compatible = "ibm,uic-440gx", "ibm,uic"; + interrupt-controller; + cell-index = <0>; + dcr-reg = <0c0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <01 4 00 4>; /* cascade - first non-critical */ + interrupt-parent = <&UICB0>; + + }; + + UIC1: interrupt-controller1 { + compatible = "ibm,uic-440gx", "ibm,uic"; + interrupt-controller; + cell-index = <1>; + dcr-reg = <0d0 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <03 4 02 4>; /* cascade */ + interrupt-parent = <&UICB0>; + }; + + UIC2: interrupt-controller2 { + compatible = "ibm,uic-440gx", "ibm,uic"; + interrupt-controller; + cell-index = <2>; /* was 1 */ + dcr-reg = <210 009>; + #address-cells = <0>; + #size-cells = <0>; + #interrupt-cells = <2>; + interrupts = <05 4 04 4>; /* cascade */ + interrupt-parent = <&UICB0>; + }; + + + CPC0: cpc { + compatible = "ibm,cpc-440gp"; + dcr-reg = <0b0 003 0e0 010>; + // FIXME: anything else? + }; + + plb { + compatible = "ibm,plb-440gx", "ibm,plb4"; + #address-cells = <2>; + #size-cells = <1>; + ranges; + clock-frequency = <9896800>; // 160MHz + + SDRAM0: memory-controller { + compatible = "ibm,sdram-440gp"; + dcr-reg = <010 2>; + // FIXME: anything else? + }; + + SRAM0: sram { + compatible = "ibm,sram-440gp"; + dcr-reg = <020 8 00a 1>; + }; + + DMA0: dma { + // FIXME: ??? + compatible = "ibm,dma-440gp"; + dcr-reg = <100 027>; + }; + + MAL0: mcmal { + compatible = "ibm,mcmal-440gx", "ibm,mcmal2"; + dcr-reg = <180 62>; + num-tx-chans = <4>; + num-rx-chans = <4>; + interrupt-parent = <&MAL0>; + interrupts = <0 1 2 3 4>; + #interrupt-cells = <1>; + #address-cells = <0>; + #size-cells = <0>; + interrupt-map = </*TXEOB*/ 0 &UIC0 a 4 + /*RXEOB*/ 1 &UIC0 b 4 + /*SERR*/ 2 &UIC1 0 4 + /*TXDE*/ 3 &UIC1 1 4 + /*RXDE*/ 4 &UIC1 2 4>; + interrupt-map-mask = <ffffffff>; + }; + + POB0: opb { + compatible = "ibm,opb-440gx", "ibm,opb"; + #address-cells = <1>; + #size-cells = <1>; + /* Wish there was a nicer way of specifying a full 32-bit + range */ + ranges = <00000000 1 00000000 80000000 + 80000000 1 80000000 80000000>; + dcr-reg = <090 00b>; + interrupt-parent = <&UIC1>; + interrupts = <7 4>; + clock-frequency = <4C4B400>; // 80MHz + + + EBC0: ebc { + compatible = "ibm,ebc-440gx", "ibm,ebc"; + dcr-reg = <012 2>; + #address-cells = <2>; + #size-cells = <1>; + clock-frequency = <4C4B400>; // 80MHz + + /* ranges property is supplied by zImage + * based on firmware's configuration of the + * EBC bridge */ + + interrupts = <5 4>; + interrupt-parent = <&UIC1>; + + /* TODO: Add other EBC devices */ + }; + + + + UART0: serial@40000200 { + device_type = "serial"; + compatible = "ns16550"; + reg = <40000200 8>; + virtual-reg = <e0000200>; + clock-frequency = <A8C000>; + current-speed = <1C200>; /* 115200 */ + interrupt-parent = <&UIC0>; + interrupts = <0 4>; + }; + + UART1: serial@40000300 { + device_type = "serial"; + compatible = "ns16550"; + reg = <40000300 8>; + virtual-reg = <e0000300>; + clock-frequency = <A8C000>; + current-speed = <1C200>; /* 115200 */ + interrupt-parent = <&UIC0>; + interrupts = <1 4>; + }; + + IIC0: i2c@40000400 { + /* FIXME */ + device_type = "i2c"; + compatible = "ibm,iic-440gp", "ibm,iic"; + reg = <40000400 14>; + interrupt-parent = <&UIC0>; + interrupts = <2 4>; + }; + IIC1: i2c@40000500 { + /* FIXME */ + device_type = "i2c"; + compatible = "ibm,iic-440gp", "ibm,iic"; + reg = <40000500 14>; + interrupt-parent = <&UIC0>; + interrupts = <3 4>; + }; + + GPIO0: gpio@40000700 { + /* FIXME */ + compatible = "ibm,gpio-440gp"; + reg = <40000700 20>; + }; + + ZMII0: emac-zmii@40000780 { + device_type = "zgmii-interface"; + compatible = "ibm,zmii-440gx", "ibm,zmii"; + reg = <40000780 c>; + }; + + RGMII0: emac-rgmii@40000790 { + device_type = "rgmii-interface"; + compatible = "ibm,rgmii"; + reg = <40000790 8>; + }; + + + EMAC0: ethernet@40000800 { + unused = <1>; + linux,network-index = <2>; + device_type = "network"; + compatible = "ibm,emac-440gx", "ibm,emac4"; + interrupt-parent = <&UIC1>; + interrupts = <1c 4 1d 4>; + reg = <40000800 70>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <0>; + mal-rx-channel = <0>; + cell-index = <0>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <0>; + }; + EMAC1: ethernet@40000900 { + unused = <1>; + linux,network-index = <3>; + device_type = "network"; + compatible = "ibm,emac-440gx", "ibm,emac4"; + interrupt-parent = <&UIC1>; + interrupts = <1e 4 1f 4>; + reg = <40000900 70>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <1>; + mal-rx-channel = <1>; + cell-index = <1>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rmii"; + phy-map = <00000001>; + zmii-device = <&ZMII0>; + zmii-channel = <1>; + }; + + EMAC2: ethernet@40000c00 { + linux,network-index = <0>; + device_type = "network"; + compatible = "ibm,emac-440gx", "ibm,emac4"; + interrupt-parent = <&UIC2>; + interrupts = <0 4 1 4>; + reg = <40000c00 70>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <2>; + mal-rx-channel = <2>; + cell-index = <2>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000001>; + rgmii-device = <&RGMII0>; + rgmii-channel = <0>; + zmii-device = <&ZMII0>; + zmii-channel = <2>; + }; + + EMAC3: ethernet@40000e00 { + linux,network-index = <1>; + device_type = "network"; + compatible = "ibm,emac-440gx", "ibm,emac4"; + interrupt-parent = <&UIC2>; + interrupts = <2 4 3 4>; + reg = <40000e00 70>; + local-mac-address = [000000000000]; // Filled in by zImage + mal-device = <&MAL0>; + mal-tx-channel = <3>; + mal-rx-channel = <3>; + cell-index = <3>; + max-frame-size = <5dc>; + rx-fifo-size = <1000>; + tx-fifo-size = <800>; + phy-mode = "rgmii"; + phy-map = <00000003>; + rgmii-device = <&RGMII0>; + rgmii-channel = <1>; + zmii-device = <&ZMII0>; + zmii-channel = <3>; + }; + + + GPT0: gpt@40000a00 { + /* FIXME */ + reg = <40000a00 d4>; + interrupt-parent = <&UIC0>; + interrupts = <12 4 13 4 14 4 15 4 16 4>; + }; + + }; + + PCIX0: pci@20ec00000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb440gp-pcix", "ibm,plb-pcix"; + primary; + large-inbound-windows; + enable-msi-hole; + reg = <2 0ec00000 8 /* Config space access */ + 0 0 0 /* no IACK cycles */ + 2 0ed00000 4 /* Special cycles */ + 2 0ec80000 100 /* Internal registers */ + 2 0ec80100 fc>; /* Internal messaging registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed + */ + ranges = <02000000 0 80000000 00000003 80000000 0 80000000 + 01000000 0 00000000 00000002 08000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 0 80000000>; + + interrupt-map-mask = <f800 0 0 7>; + interrupt-map = < + /* IDSEL 1 */ + 0800 0 0 1 &UIC0 17 8 + 0800 0 0 2 &UIC0 18 8 + 0800 0 0 3 &UIC0 19 8 + 0800 0 0 4 &UIC0 1a 8 + + /* IDSEL 2 */ + 1000 0 0 1 &UIC0 18 8 + 1000 0 0 2 &UIC0 19 8 + 1000 0 0 3 &UIC0 1a 8 + 1000 0 0 4 &UIC0 17 8 + >; + }; + }; + + chosen { + linux,stdout-path = "/plb/opb/serial@40000300"; + }; +}; diff --git a/arch/powerpc/boot/dts/walnut.dts b/arch/powerpc/boot/dts/walnut.dts index 754fa3960f8..0e3825e599d 100644 --- a/arch/powerpc/boot/dts/walnut.dts +++ b/arch/powerpc/boot/dts/walnut.dts @@ -14,14 +14,21 @@ #size-cells = <1>; model = "ibm,walnut"; compatible = "ibm,walnut"; - dcr-parent = <&/cpus/PowerPC,405GP@0>; + dcr-parent = <&/cpus/cpu@0>; + + aliases { + ethernet0 = &EMAC; + serial0 = &UART0; + serial1 = &UART1; + }; cpus { #address-cells = <1>; #size-cells = <0>; - PowerPC,405GP@0 { + cpu@0 { device_type = "cpu"; + model = "PowerPC,405GP"; reg = <0>; clock-frequency = <bebc200>; /* Filled in by zImage */ timebase-frequency = <0>; /* Filled in by zImage */ @@ -190,6 +197,45 @@ virtual-reg = <f0300005>; }; }; + + PCI0: pci@ec000000 { + device_type = "pci"; + #interrupt-cells = <1>; + #size-cells = <2>; + #address-cells = <3>; + compatible = "ibm,plb405gp-pci", "ibm,plb-pci"; + primary; + reg = <eec00000 8 /* Config space access */ + eed80000 4 /* IACK */ + eed80000 4 /* Special cycle */ + ef480000 40>; /* Internal registers */ + + /* Outbound ranges, one memory and one IO, + * later cannot be changed. Chip supports a second + * IO range but we don't use it for now + */ + ranges = <02000000 0 80000000 80000000 0 20000000 + 01000000 0 00000000 e8000000 0 00010000>; + + /* Inbound 2GB range starting at 0 */ + dma-ranges = <42000000 0 0 0 0 80000000>; + + /* Walnut has all 4 IRQ pins tied together per slot */ + interrupt-map-mask = <f800 0 0 0>; + interrupt-map = < + /* IDSEL 1 */ + 0800 0 0 0 &UIC0 1c 8 + + /* IDSEL 2 */ + 1000 0 0 0 &UIC0 1d 8 + + /* IDSEL 3 */ + 1800 0 0 0 &UIC0 1e 8 + + /* IDSEL 4 */ + 2000 0 0 0 &UIC0 1f 8 + >; + }; }; chosen { diff --git a/arch/powerpc/boot/ebony.c b/arch/powerpc/boot/ebony.c index ee31be5e633..f61364c47a7 100644 --- a/arch/powerpc/boot/ebony.c +++ b/arch/powerpc/boot/ebony.c @@ -31,66 +31,6 @@ static u8 *ebony_mac0, *ebony_mac1; -/* Calculate 440GP clocks */ -void ibm440gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk) -{ - u32 sys0 = mfdcr(DCRN_CPC0_SYS0); - u32 cr0 = mfdcr(DCRN_CPC0_CR0); - u32 cpu, plb, opb, ebc, tb, uart0, uart1, m; - u32 opdv = CPC0_SYS0_OPDV(sys0); - u32 epdv = CPC0_SYS0_EPDV(sys0); - - if (sys0 & CPC0_SYS0_BYPASS) { - /* Bypass system PLL */ - cpu = plb = sysclk; - } else { - if (sys0 & CPC0_SYS0_EXTSL) - /* PerClk */ - m = CPC0_SYS0_FWDVB(sys0) * opdv * epdv; - else - /* CPU clock */ - m = CPC0_SYS0_FBDV(sys0) * CPC0_SYS0_FWDVA(sys0); - cpu = sysclk * m / CPC0_SYS0_FWDVA(sys0); - plb = sysclk * m / CPC0_SYS0_FWDVB(sys0); - } - - opb = plb / opdv; - ebc = opb / epdv; - - /* FIXME: Check if this is for all 440GP, or just Ebony */ - if ((mfpvr() & 0xf0000fff) == 0x40000440) - /* Rev. B 440GP, use external system clock */ - tb = sysclk; - else - /* Rev. C 440GP, errata force us to use internal clock */ - tb = cpu; - - if (cr0 & CPC0_CR0_U0EC) - /* External UART clock */ - uart0 = ser_clk; - else - /* Internal UART clock */ - uart0 = plb / CPC0_CR0_UDIV(cr0); - - if (cr0 & CPC0_CR0_U1EC) - /* External UART clock */ - uart1 = ser_clk; - else - /* Internal UART clock */ - uart1 = plb / CPC0_CR0_UDIV(cr0); - - printf("PPC440GP: SysClk = %dMHz (%x)\n\r", - (sysclk + 500000) / 1000000, sysclk); - - dt_fixup_cpu_clocks(cpu, tb, 0); - - dt_fixup_clock("/plb", plb); - dt_fixup_clock("/plb/opb", opb); - dt_fixup_clock("/plb/opb/ebc", ebc); - dt_fixup_clock("/plb/opb/serial@40000200", uart0); - dt_fixup_clock("/plb/opb/serial@40000300", uart1); -} - #define EBONY_FPGA_PATH "/plb/opb/ebc/fpga" #define EBONY_FPGA_FLASH_SEL 0x01 #define EBONY_SMALL_FLASH_PATH "/plb/opb/ebc/small-flash" @@ -134,7 +74,7 @@ static void ebony_fixups(void) unsigned long sysclk = 33000000; ibm440gp_fixup_clocks(sysclk, 6 * 1843200); - ibm4xx_fixup_memsize(); + ibm4xx_sdram_fixup_memsize(); dt_fixup_mac_addresses(ebony_mac0, ebony_mac1); ibm4xx_fixup_ebc_ranges("/plb/opb/ebc"); ebony_flashsel_fixup(); diff --git a/arch/powerpc/boot/ep405.c b/arch/powerpc/boot/ep405.c new file mode 100644 index 00000000000..2d08a862cbe --- /dev/null +++ b/arch/powerpc/boot/ep405.c @@ -0,0 +1,74 @@ +/* + * Embedded Planet EP405 with PlanetCore firmware + * + * (c) Benjamin Herrenschmidt <benh@kernel.crashing.org>, IBM Corp,\ + * + * Based on ep88xc.c by + * + * Scott Wood <scottwood@freescale.com> + * + * Copyright (c) 2007 Freescale Semiconductor, Inc. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License version 2 as published + * by the Free Software Foundation. + */ + +#include "ops.h" +#include "stdio.h" +#include "planetcore.h" +#include "dcr.h" +#include "4xx.h" +#include "io.h" + +static char *table; +static u64 mem_size; + +static void platform_fixups(void) +{ + u64 val; + void *nvrtc; + + dt_fixup_memory(0, mem_size); + planetcore_set_mac_addrs(table); + + if (!planetcore_get_decimal(table, PLANETCORE_KEY_CRYSTAL_HZ, &val)) { + printf("No PlanetCore crystal frequency key.\r\n"); + return; + } + ibm405gp_fixup_clocks(val, 0xa8c000); + ibm4xx_quiesce_eth((u32 *)0xef600800, NULL); + ibm4xx_fixup_ebc_ranges("/plb/ebc"); + + if (!planetcore_get_decimal(table, PLANETCORE_KEY_KB_NVRAM, &val)) { + printf("No PlanetCore NVRAM size key.\r\n"); + return; + } + nvrtc = finddevice("/plb/ebc/nvrtc@4,200000"); + if (nvrtc != NULL) { + u32 reg[3] = { 4, 0x200000, 0}; + getprop(nvrtc, "reg", reg, 3); + reg[2] = (val << 10) & 0xffffffff; + setprop(nvrtc, "reg", reg, 3); + } +} + +void platform_init(unsigned long r3, unsigned long r4, unsigned long r5, + unsigned long r6, unsigned long r7) +{ + table = (char *)r3; + planetcore_prepare_table(table); + + if (!planetcore_get_decimal(table, PLANETCORE_KEY_MB_RAM, &mem_size)) + return; + + mem_size *= 1024 * 1024; + simple_alloc_init(_end, mem_size - (unsigned long)_end, 32, 64); + + fdt_init(_dtb_start); + + planetcore_set_stdout_path(table); + + serial_console_init(); + platform_ops.fixups = platform_fixups; +} diff --git a/arch/powerpc/boot/reg.h b/arch/powerpc/boot/reg.h index d3cd9ee98af..9c2c9978e0e 100644 --- a/arch/powerpc/boot/reg.h +++ b/arch/powerpc/boot/reg.h @@ -16,6 +16,14 @@ static inline u32 mfpvr(void) return pvr; } +#define __stringify_1(x) #x +#define __stringify(x) __stringify_1(x) + +#define mfspr(rn) ({unsigned long rval; \ + asm volatile("mfspr %0," __stringify(rn) \ + : "=r" (rval)); rval; }) +#define mtspr(rn, v) asm volatile("mtspr " __stringify(rn) ",%0" : : "r" (v)) + register void *__stack_pointer asm("r1"); #define get_sp() (__stack_pointer) diff --git a/arch/powerpc/boot/treeboot-walnut.c b/arch/powerpc/boot/treeboot-walnut.c index 70ffce343c0..472e36605a5 100644 --- a/arch/powerpc/boot/treeboot-walnut.c +++ b/arch/powerpc/boot/treeboot-walnut.c @@ -20,55 +20,6 @@ BSS_STACK(4096); -void ibm405gp_fixup_clocks(unsigned int sysclk, unsigned int ser_clk) -{ - u32 pllmr = mfdcr(DCRN_CPC0_PLLMR); - u32 cpc0_cr0 = mfdcr(DCRN_405_CPC0_CR0); - u32 cpc0_cr1 = mfdcr(DCRN_405_CPC0_CR1); - u32 cpu, plb, opb, ebc, tb, uart0, uart1, m; - u32 fwdv, fbdv, cbdv, opdv, epdv, udiv; - - fwdv = (8 - ((pllmr & 0xe0000000) >> 29)); - fbdv = (pllmr & 0x1e000000) >> 25; - cbdv = ((pllmr & 0x00060000) >> 17) + 1; - opdv = ((pllmr & 0x00018000) >> 15) + 1; - epdv = ((pllmr & 0x00001800) >> 13) + 2; - udiv = ((cpc0_cr0 & 0x3e) >> 1) + 1; - - m = fwdv * fbdv * cbdv; - - cpu = sysclk * m / fwdv; - plb = cpu / cbdv; - opb = plb / opdv; - ebc = plb / epdv; - - if (cpc0_cr0 & 0x80) { - /* uart0 uses the external clock */ - uart0 = ser_clk; - } else { - uart0 = cpu / udiv; - } - - if (cpc0_cr0 & 0x40) { - /* uart1 uses the external clock */ - uart1 = ser_clk; - } else { - uart1 = cpu / udiv; - } - - /* setup the timebase clock to tick at the cpu frequency */ - cpc0_cr1 = cpc0_cr1 & ~0x00800000; - mtdcr(DCRN_405_CPC0_CR1, cpc0_cr1); - tb = cpu; - - dt_fixup_cpu_clocks(cpu, tb, 0); - dt_fixup_clock("/plb", plb); - dt_fixup_clock("/plb/opb", opb); - dt_fixup_clock("/plb/ebc", ebc); - dt_fixup_clock("/plb/opb/serial@ef600300", uart0); - dt_fixup_clock("/plb/opb/serial@ef600400", uart1); -} - static void walnut_flashsel_fixup(void) { void *devp, *sram; @@ -112,7 +63,7 @@ static void walnut_flashsel_fixup(void) #define WALNUT_OPENBIOS_MAC_OFF 0xfffffe0b static void walnut_fixups(void) { - ibm4xx_fixup_memsize(); + ibm4xx_sdram_fixup_memsize(); ibm405gp_fixup_clocks(33330000, 0xa8c000); ibm4xx_quiesce_eth((u32 *)0xef600800, NULL); ibm4xx_fixup_ebc_ranges("/plb/ebc"); diff --git a/arch/powerpc/boot/wrapper b/arch/powerpc/boot/wrapper index f961cdeb97a..154df055aad 100755 --- a/arch/powerpc/boot/wrapper +++ b/arch/powerpc/boot/wrapper @@ -168,7 +168,7 @@ ps3) ksection=.kernel:vmlinux.bin isection=.kernel:initrd ;; -ep88xc) +ep88xc|ep405) platformo="$object/fixed-head.o $object/$platform.o" binary=y ;; diff --git a/arch/powerpc/configs/bamboo_defconfig b/arch/powerpc/configs/bamboo_defconfig index 76d883e008b..0dc9c4b4794 100644 --- a/arch/powerpc/configs/bamboo_defconfig +++ b/arch/powerpc/configs/bamboo_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:04 2007 +# Linux kernel version: 2.6.24-rc6 +# Mon Dec 24 10:49:50 2007 # # CONFIG_PPC64 is not set @@ -131,6 +131,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support @@ -143,6 +144,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" CONFIG_BAMBOO=y # CONFIG_EBONY is not set # CONFIG_SEQUOIA is not set +# CONFIG_TAISHAN is not set +# CONFIG_KATMAI is not set +# CONFIG_RAINIER is not set CONFIG_440EP=y CONFIG_IBM440EP_ERR42=y # CONFIG_MPIC is not set @@ -736,19 +740,7 @@ CONFIG_DEBUGGER=y # CONFIG_KGDB is not set # CONFIG_XMON is not set # CONFIG_BDI_SWITCH is not set -CONFIG_PPC_EARLY_DEBUG=y -# CONFIG_PPC_EARLY_DEBUG_LPAR is not set -# CONFIG_PPC_EARLY_DEBUG_G5 is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set -# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set -# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set -# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set -# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set -# CONFIG_PPC_EARLY_DEBUG_BEAT is not set -CONFIG_PPC_EARLY_DEBUG_44x=y -# CONFIG_PPC_EARLY_DEBUG_CPM is not set -CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300 -CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x0 +# CONFIG_PPC_EARLY_DEBUG is not set # # Security options diff --git a/arch/powerpc/configs/ebony_defconfig b/arch/powerpc/configs/ebony_defconfig index b84298ce42b..cf860f16665 100644 --- a/arch/powerpc/configs/ebony_defconfig +++ b/arch/powerpc/configs/ebony_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:11 2007 +# Linux kernel version: 2.6.24-rc6 +# Mon Dec 24 11:16:26 2007 # # CONFIG_PPC64 is not set @@ -130,6 +130,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support @@ -142,6 +143,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_BAMBOO is not set CONFIG_EBONY=y # CONFIG_SEQUOIA is not set +# CONFIG_TAISHAN is not set +# CONFIG_KATMAI is not set +# CONFIG_RAINIER is not set CONFIG_440GP=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set diff --git a/arch/powerpc/configs/ep405_defconfig b/arch/powerpc/configs/ep405_defconfig new file mode 100644 index 00000000000..3829c916625 --- /dev/null +++ b/arch/powerpc/configs/ep405_defconfig @@ -0,0 +1,952 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc6 +# Mon Dec 24 11:17:13 2007 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +CONFIG_40x=y +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_4xx=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PPC4xx_PCI_EXPRESS is not set + +# +# Platform support +# +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +CONFIG_EP405=y +# CONFIG_KILAUEA is not set +# CONFIG_MAKALU is not set +# CONFIG_WALNUT is not set +# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set +CONFIG_405GP=y +CONFIG_IBM405_ERR77=y +CONFIG_IBM405_ERR51=y +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_CPM2 is not set +# CONFIG_FSL_ULI1575 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_HIBERNATION_UP_POSSIBLE=y +CONFIG_SECCOMP=y +CONFIG_WANT_DEVICE_TREE=y +CONFIG_DEVICE_TREE="ep405.dts" +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_NEW_EMAC=y +CONFIG_IBM_NEW_EMAC_RXB=128 +CONFIG_IBM_NEW_EMAC_TXB=64 +CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 +# CONFIG_IBM_NEW_EMAC_DEBUG is not set +CONFIG_IBM_NEW_EMAC_ZMII=y +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +# CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +CONFIG_USB=y +# CONFIG_USB_DEBUG is not set + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +CONFIG_USB_DEVICE_CLASS=y +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +# CONFIG_USB_EHCI_HCD is not set +# CONFIG_USB_ISP116X_HCD is not set +CONFIG_USB_OHCI_HCD=y +CONFIG_USB_OHCI_HCD_PPC_OF=y +CONFIG_USB_OHCI_HCD_PPC_OF_BE=y +CONFIG_USB_OHCI_HCD_PPC_OF_LE=y +CONFIG_USB_OHCI_HCD_PCI=y +CONFIG_USB_OHCI_BIG_ENDIAN_DESC=y +CONFIG_USB_OHCI_BIG_ENDIAN_MMIO=y +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set +# CONFIG_USB_R8A66597_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_ACM is not set +# CONFIG_USB_PRINTER is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# may also be needed; see USB_STORAGE Help for more information +# +# CONFIG_USB_LIBUSUAL is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +CONFIG_USB_MON=y + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +# CONFIG_USB_SERIAL is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_ADUTUX is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_BERRY_CHARGE is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYPRESS_CY7C63 is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGET is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_FTDI_ELAN is not set +# CONFIG_USB_APPLEDISPLAY is not set +# CONFIG_USB_LD is not set +# CONFIG_USB_TRANCEVIBRATOR is not set +# CONFIG_USB_IOWARRIOR is not set +# CONFIG_USB_TEST is not set + +# +# USB DSL modem support +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set +# CONFIG_UCC_SLOW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUGGER is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_HW=y +# CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/katmai_defconfig b/arch/powerpc/configs/katmai_defconfig new file mode 100644 index 00000000000..c8804ec01ea --- /dev/null +++ b/arch/powerpc/configs/katmai_defconfig @@ -0,0 +1,790 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc6 +# Mon Dec 24 11:17:43 2007 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_E200 is not set +CONFIG_4xx=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PPC4xx_PCI_EXPRESS=y + +# +# Platform support +# +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_BAMBOO is not set +# CONFIG_EBONY is not set +# CONFIG_SEQUOIA is not set +# CONFIG_TAISHAN is not set +CONFIG_KATMAI=y +# CONFIG_RAINIER is not set +CONFIG_440SPe=y +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_CPM2 is not set +# CONFIG_FSL_ULI1575 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_PROC_DEVICETREE=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +CONFIG_SECCOMP=y +CONFIG_WANT_DEVICE_TREE=y +CONFIG_DEVICE_TREE="katmai.dts" +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x01000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_MACINTOSH_DRIVERS=y +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_NEW_EMAC=y +CONFIG_IBM_NEW_EMAC_RXB=128 +CONFIG_IBM_NEW_EMAC_TXB=64 +CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 +# CONFIG_IBM_NEW_EMAC_DEBUG is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +# CONFIG_IBM_NEW_EMAC_RGMII is not set +# CONFIG_IBM_NEW_EMAC_TAH is not set +CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set +# CONFIG_UCC_SLOW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_DEBUGGER=y +# CONFIG_KGDB is not set +# CONFIG_XMON is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_HW=y +# CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/kilauea_defconfig b/arch/powerpc/configs/kilauea_defconfig index 28dee12031f..c86e7565adc 100644 --- a/arch/powerpc/configs/kilauea_defconfig +++ b/arch/powerpc/configs/kilauea_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:48:20 2007 +# Linux kernel version: 2.6.24-rc6 +# Mon Dec 24 11:18:12 2007 # # CONFIG_PPC64 is not set @@ -40,7 +40,7 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y -# CONFIG_PPC_UDBG_16550 is not set +CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y @@ -125,6 +125,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PPC4xx_PCI_EXPRESS=y # # Platform support @@ -134,9 +135,12 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +# CONFIG_EP405 is not set CONFIG_KILAUEA=y +# CONFIG_MAKALU is not set # CONFIG_WALNUT is not set # CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set +CONFIG_405EX=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -199,11 +203,17 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # # Advanced setup @@ -368,11 +378,13 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_PMC551 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -395,9 +407,14 @@ CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=35000 @@ -417,6 +434,14 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set @@ -426,9 +451,14 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set +# CONFIG_IP1000 is not set +# CONFIG_ARCNET is not set # CONFIG_NET_ETHERNET is not set +CONFIG_IBM_NEW_EMAC_RGMII=y +CONFIG_IBM_NEW_EMAC_EMAC4=y # CONFIG_NETDEV_1000 is not set # CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set # # Wireless LAN @@ -436,6 +466,8 @@ CONFIG_NETDEVICES=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -467,6 +499,7 @@ CONFIG_NETDEVICES=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y @@ -481,6 +514,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y @@ -490,8 +524,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -525,6 +561,8 @@ CONFIG_SSB_POSSIBLE=y # # Graphics support # +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set # CONFIG_VIDEO_OUTPUT_CONTROL is not set # CONFIG_FB is not set @@ -542,6 +580,7 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_USB_SUPPORT is not set # CONFIG_MMC is not set # CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set diff --git a/arch/powerpc/configs/makalu_defconfig b/arch/powerpc/configs/makalu_defconfig new file mode 100644 index 00000000000..c5db0265e5d --- /dev/null +++ b/arch/powerpc/configs/makalu_defconfig @@ -0,0 +1,812 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc6 +# Mon Dec 24 11:18:32 2007 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +CONFIG_40x=y +# CONFIG_44x is not set +# CONFIG_E200 is not set +CONFIG_4xx=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +# CONFIG_FAIR_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_EXTRA_PASS=y +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +CONFIG_PPC4xx_PCI_EXPRESS=y + +# +# Platform support +# +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_EP405 is not set +# CONFIG_KILAUEA is not set +CONFIG_MAKALU=y +# CONFIG_WALNUT is not set +# CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set +CONFIG_405EX=y +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_CPM2 is not set +# CONFIG_FSL_ULI1575 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_PROC_DEVICETREE=y +# CONFIG_CMDLINE_BOOL is not set +# CONFIG_PM is not set +CONFIG_SUSPEND_UP_POSSIBLE=y +CONFIG_HIBERNATION_UP_POSSIBLE=y +CONFIG_SECCOMP=y +CONFIG_WANT_DEVICE_TREE=y +CONFIG_DEVICE_TREE="kilauea.dts" +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x00400000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLKDEVS=m +CONFIG_MTD_BLOCK=m +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_CFI_INTELEXT is not set +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set +# CONFIG_MISC_DEVICES is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +# CONFIG_MACINTOSH_DRIVERS is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_NEW_EMAC=y +CONFIG_IBM_NEW_EMAC_RXB=256 +CONFIG_IBM_NEW_EMAC_TXB=256 +CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 +# CONFIG_IBM_NEW_EMAC_DEBUG is not set +# CONFIG_IBM_NEW_EMAC_ZMII is not set +CONFIG_IBM_NEW_EMAC_RGMII=y +# CONFIG_IBM_NEW_EMAC_TAH is not set +CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +# CONFIG_NETDEV_1000 is not set +# CONFIG_NETDEV_10000 is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +# CONFIG_USB_SUPPORT is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS2_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set +# CONFIG_UCC_SLOW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +# CONFIG_INSTRUMENTATION is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_DEBUGGER is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_HW=y +# CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/rainier_defconfig b/arch/powerpc/configs/rainier_defconfig new file mode 100644 index 00000000000..7b95001a22a --- /dev/null +++ b/arch/powerpc/configs/rainier_defconfig @@ -0,0 +1,873 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc6 +# Mon Dec 24 11:22:40 2007 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_E200 is not set +CONFIG_4xx=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PPC4xx_PCI_EXPRESS is not set + +# +# Platform support +# +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_BAMBOO is not set +# CONFIG_EBONY is not set +# CONFIG_SEQUOIA is not set +# CONFIG_TAISHAN is not set +# CONFIG_KATMAI is not set +CONFIG_RAINIER=y +CONFIG_440GRX=y +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_CPM2 is not set +# CONFIG_FSL_ULI1575 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +CONFIG_MATH_EMULATION=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_PROC_DEVICETREE=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +CONFIG_SECCOMP=y +CONFIG_WANT_DEVICE_TREE=y +CONFIG_DEVICE_TREE="rainier.dts" +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x01000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +CONFIG_MTD_CMDLINE_PARTS=y + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +# CONFIG_MTD_BLKDEVS is not set +# CONFIG_MTD_BLOCK is not set +# CONFIG_MTD_BLOCK_RO is not set +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set +# CONFIG_RFD_FTL is not set +# CONFIG_SSFDC is not set +# CONFIG_MTD_OOPS is not set + +# +# RAM/ROM/Flash chip drivers +# +CONFIG_MTD_CFI=y +CONFIG_MTD_JEDECPROBE=y +CONFIG_MTD_GEN_PROBE=y +# CONFIG_MTD_CFI_ADV_OPTIONS is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +CONFIG_MTD_CFI_INTELEXT=y +CONFIG_MTD_CFI_AMDSTD=y +# CONFIG_MTD_CFI_STAA is not set +CONFIG_MTD_CFI_UTIL=y +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set +# CONFIG_MTD_PHYSMAP is not set +CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set +# CONFIG_MTD_PLATRAM is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set +# CONFIG_MTD_NAND is not set +# CONFIG_MTD_ONENAND is not set + +# +# UBI - Unsorted block images +# +# CONFIG_MTD_UBI is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_MACINTOSH_DRIVERS=y +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set +# CONFIG_ARCNET is not set +# CONFIG_NET_ETHERNET is not set +CONFIG_IBM_NEW_EMAC_ZMII=y +CONFIG_IBM_NEW_EMAC_RGMII=y +CONFIG_IBM_NEW_EMAC_EMAC4=y +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +CONFIG_JFFS2_FS_WRITEBUFFER=y +# CONFIG_JFFS2_FS_WBUF_VERIFY is not set +# CONFIG_JFFS2_SUMMARY is not set +# CONFIG_JFFS2_FS_XATTR is not set +# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set +CONFIG_JFFS2_ZLIB=y +# CONFIG_JFFS2_LZO is not set +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set +# CONFIG_UCC_SLOW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_DEBUGGER=y +# CONFIG_KGDB is not set +# CONFIG_XMON is not set +# CONFIG_BDI_SWITCH is not set +CONFIG_PPC_EARLY_DEBUG=y +# CONFIG_PPC_EARLY_DEBUG_LPAR is not set +# CONFIG_PPC_EARLY_DEBUG_G5 is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_PANEL is not set +# CONFIG_PPC_EARLY_DEBUG_RTAS_CONSOLE is not set +# CONFIG_PPC_EARLY_DEBUG_MAPLE is not set +# CONFIG_PPC_EARLY_DEBUG_ISERIES is not set +# CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set +# CONFIG_PPC_EARLY_DEBUG_BEAT is not set +CONFIG_PPC_EARLY_DEBUG_44x=y +# CONFIG_PPC_EARLY_DEBUG_40x is not set +# CONFIG_PPC_EARLY_DEBUG_CPM is not set +CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300 +CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_HW=y +# CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/sequoia_defconfig b/arch/powerpc/configs/sequoia_defconfig index bc3c086ddfc..2bb4df82fbd 100644 --- a/arch/powerpc/configs/sequoia_defconfig +++ b/arch/powerpc/configs/sequoia_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:49:17 2007 +# Linux kernel version: 2.6.24-rc6 +# Mon Dec 24 11:23:22 2007 # # CONFIG_PPC64 is not set @@ -129,6 +129,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support @@ -141,8 +142,10 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_BAMBOO is not set # CONFIG_EBONY is not set CONFIG_SEQUOIA=y +# CONFIG_TAISHAN is not set +# CONFIG_KATMAI is not set +# CONFIG_RAINIER is not set CONFIG_440EPX=y -CONFIG_440A=y # CONFIG_MPIC is not set # CONFIG_MPIC_WEIRD is not set # CONFIG_PPC_I8259 is not set @@ -811,6 +814,7 @@ CONFIG_PPC_EARLY_DEBUG=y # CONFIG_PPC_EARLY_DEBUG_PAS_REALMODE is not set # CONFIG_PPC_EARLY_DEBUG_BEAT is not set CONFIG_PPC_EARLY_DEBUG_44x=y +# CONFIG_PPC_EARLY_DEBUG_40x is not set # CONFIG_PPC_EARLY_DEBUG_CPM is not set CONFIG_PPC_EARLY_DEBUG_44x_PHYSLOW=0xef600300 CONFIG_PPC_EARLY_DEBUG_44x_PHYSHIGH=0x1 diff --git a/arch/powerpc/configs/taishan_defconfig b/arch/powerpc/configs/taishan_defconfig new file mode 100644 index 00000000000..ade84b92877 --- /dev/null +++ b/arch/powerpc/configs/taishan_defconfig @@ -0,0 +1,790 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.24-rc6 +# Mon Dec 24 11:23:39 2007 +# +# CONFIG_PPC64 is not set + +# +# Processor support +# +# CONFIG_6xx is not set +# CONFIG_PPC_85xx is not set +# CONFIG_PPC_8xx is not set +# CONFIG_40x is not set +CONFIG_44x=y +# CONFIG_E200 is not set +CONFIG_4xx=y +CONFIG_BOOKE=y +CONFIG_PTE_64BIT=y +CONFIG_PHYS_64BIT=y +# CONFIG_PPC_MM_SLICES is not set +CONFIG_NOT_COHERENT_CACHE=y +CONFIG_PPC32=y +CONFIG_WORD_SIZE=32 +CONFIG_PPC_MERGE=y +CONFIG_MMU=y +CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_GENERIC_TIME=y +CONFIG_GENERIC_TIME_VSYSCALL=y +CONFIG_GENERIC_CLOCKEVENTS=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_IRQ_PER_CPU=y +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_ARCH_HAS_ILOG2_U32=y +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_FIND_NEXT_BIT=y +# CONFIG_ARCH_NO_VIRT_TO_BUS is not set +CONFIG_PPC=y +CONFIG_EARLY_PRINTK=y +CONFIG_GENERIC_NVRAM=y +CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_PPC_OF=y +CONFIG_OF=y +CONFIG_PPC_UDBG_16550=y +# CONFIG_GENERIC_TBSYNC is not set +CONFIG_AUDIT_ARCH=y +CONFIG_GENERIC_BUG=y +# CONFIG_DEFAULT_UIMAGE is not set +CONFIG_PPC_DCR_NATIVE=y +# CONFIG_PPC_DCR_MMIO is not set +CONFIG_PPC_DCR=y +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +CONFIG_SYSVIPC_SYSCTL=y +CONFIG_POSIX_MQUEUE=y +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_TASKSTATS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +# CONFIG_AUDIT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_CGROUPS is not set +CONFIG_FAIR_GROUP_SCHED=y +CONFIG_FAIR_USER_SCHED=y +# CONFIG_FAIR_CGROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +# CONFIG_RELAY is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_SYSCTL=y +CONFIG_EMBEDDED=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +# CONFIG_KALLSYMS_ALL is not set +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_LSF is not set +# CONFIG_BLK_DEV_BSG is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +CONFIG_DEFAULT_AS=y +# CONFIG_DEFAULT_DEADLINE is not set +# CONFIG_DEFAULT_CFQ is not set +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PPC4xx_PCI_EXPRESS is not set + +# +# Platform support +# +# CONFIG_PPC_MPC52xx is not set +# CONFIG_PPC_MPC5200 is not set +# CONFIG_PPC_CELL is not set +# CONFIG_PPC_CELL_NATIVE is not set +# CONFIG_PQ2ADS is not set +# CONFIG_BAMBOO is not set +# CONFIG_EBONY is not set +# CONFIG_SEQUOIA is not set +CONFIG_TAISHAN=y +# CONFIG_KATMAI is not set +# CONFIG_RAINIER is not set +CONFIG_440GX=y +# CONFIG_MPIC is not set +# CONFIG_MPIC_WEIRD is not set +# CONFIG_PPC_I8259 is not set +# CONFIG_PPC_RTAS is not set +# CONFIG_MMIO_NVRAM is not set +# CONFIG_PPC_MPC106 is not set +# CONFIG_PPC_970_NAP is not set +# CONFIG_PPC_INDIRECT_IO is not set +# CONFIG_GENERIC_IOMAP is not set +# CONFIG_CPU_FREQ is not set +# CONFIG_CPM2 is not set +# CONFIG_FSL_ULI1575 is not set + +# +# Kernel options +# +# CONFIG_HIGHMEM is not set +# CONFIG_TICK_ONESHOT is not set +# CONFIG_NO_HZ is not set +# CONFIG_HIGH_RES_TIMERS is not set +CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +# CONFIG_HZ_100 is not set +CONFIG_HZ_250=y +# CONFIG_HZ_300 is not set +# CONFIG_HZ_1000 is not set +CONFIG_HZ=250 +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_MISC is not set +# CONFIG_MATH_EMULATION is not set +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_ARCH_FLATMEM_ENABLE=y +CONFIG_ARCH_POPULATES_NODE_MAP=y +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +# CONFIG_SPARSEMEM_STATIC is not set +# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_RESOURCES_64BIT=y +CONFIG_ZONE_DMA_FLAG=1 +CONFIG_BOUNCE=y +CONFIG_VIRT_TO_BUS=y +CONFIG_PROC_DEVICETREE=y +CONFIG_CMDLINE_BOOL=y +CONFIG_CMDLINE="" +CONFIG_SECCOMP=y +CONFIG_WANT_DEVICE_TREE=y +CONFIG_DEVICE_TREE="taishan.dts" +CONFIG_ISA_DMA_API=y + +# +# Bus options +# +CONFIG_ZONE_DMA=y +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +CONFIG_PCI_LEGACY=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set + +# +# Advanced setup +# +# CONFIG_ADVANCED_OPTIONS is not set + +# +# Default settings for advanced configuration options are used +# +CONFIG_HIGHMEM_START=0xfe000000 +CONFIG_LOWMEM_SIZE=0x30000000 +CONFIG_KERNEL_START=0xc0000000 +CONFIG_TASK_SIZE=0xc0000000 +CONFIG_CONSISTENT_START=0xff100000 +CONFIG_CONSISTENT_SIZE=0x00200000 +CONFIG_BOOT_LOAD=0x01000000 + +# +# Networking +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +# CONFIG_PACKET_MMAP is not set +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_INET=y +# CONFIG_IP_MULTICAST is not set +# CONFIG_IP_ADVANCED_ROUTER is not set +CONFIG_IP_FIB_HASH=y +CONFIG_IP_PNP=y +CONFIG_IP_PNP_DHCP=y +CONFIG_IP_PNP_BOOTP=y +# CONFIG_IP_PNP_RARP is not set +# CONFIG_NET_IPIP is not set +# CONFIG_NET_IPGRE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_XFRM_TUNNEL is not set +# CONFIG_INET_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_TRANSPORT is not set +# CONFIG_INET_XFRM_MODE_TUNNEL is not set +# CONFIG_INET_XFRM_MODE_BEET is not set +# CONFIG_INET_LRO is not set +CONFIG_INET_DIAG=y +CONFIG_INET_TCP_DIAG=y +# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_TCP_CONG_CUBIC=y +CONFIG_DEFAULT_TCP_CONG="cubic" +# CONFIG_TCP_MD5SIG is not set +# CONFIG_IPV6 is not set +# CONFIG_INET6_XFRM_TUNNEL is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_NETWORK_SECMARK is not set +# CONFIG_NETFILTER is not set +# CONFIG_IP_DCCP is not set +# CONFIG_IP_SCTP is not set +# CONFIG_TIPC is not set +# CONFIG_ATM is not set +# CONFIG_BRIDGE is not set +# CONFIG_VLAN_8021Q is not set +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set +# CONFIG_NET_SCHED is not set + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_HAMRADIO is not set +# CONFIG_IRDA is not set +# CONFIG_BT is not set +# CONFIG_AF_RXRPC is not set + +# +# Wireless +# +# CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_EXT is not set +# CONFIG_MAC80211 is not set +# CONFIG_IEEE80211 is not set +# CONFIG_RFKILL is not set +# CONFIG_NET_9P is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +CONFIG_CONNECTOR=y +CONFIG_PROC_EVENTS=y +# CONFIG_MTD is not set +CONFIG_OF_DEVICE=y +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +# CONFIG_BLK_DEV_LOOP is not set +# CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=35000 +CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 +# CONFIG_CDROM_PKTCDVD is not set +# CONFIG_ATA_OVER_ETH is not set +# CONFIG_XILINX_SYSACE is not set +CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set +CONFIG_MACINTOSH_DRIVERS=y +# CONFIG_MAC_EMUMOUSEBTN is not set +# CONFIG_WINDFARM is not set +CONFIG_NETDEVICES=y +# CONFIG_NETDEVICES_MULTIQUEUE is not set +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_MACVLAN is not set +# CONFIG_EQUALIZER is not set +# CONFIG_TUN is not set +# CONFIG_VETH is not set +# CONFIG_IP1000 is not set +# CONFIG_ARCNET is not set +# CONFIG_PHYLIB is not set +CONFIG_NET_ETHERNET=y +# CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set +CONFIG_IBM_NEW_EMAC=y +CONFIG_IBM_NEW_EMAC_RXB=128 +CONFIG_IBM_NEW_EMAC_TXB=64 +CONFIG_IBM_NEW_EMAC_POLL_WEIGHT=32 +CONFIG_IBM_NEW_EMAC_RX_COPY_THRESHOLD=256 +CONFIG_IBM_NEW_EMAC_RX_SKB_HEADROOM=0 +# CONFIG_IBM_NEW_EMAC_DEBUG is not set +CONFIG_IBM_NEW_EMAC_ZMII=y +CONFIG_IBM_NEW_EMAC_RGMII=y +CONFIG_IBM_NEW_EMAC_TAH=y +CONFIG_IBM_NEW_EMAC_EMAC4=y +# CONFIG_NET_PCI is not set +# CONFIG_B44 is not set +CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set +CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_TR is not set + +# +# Wireless LAN +# +# CONFIG_WLAN_PRE80211 is not set +# CONFIG_WLAN_80211 is not set +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +# CONFIG_PPP is not set +# CONFIG_SLIP is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +# CONFIG_ISDN is not set +# CONFIG_PHONE is not set + +# +# Input device support +# +# CONFIG_INPUT is not set + +# +# Hardware I/O ports +# +# CONFIG_SERIO is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_PCI is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +CONFIG_SERIAL_8250_EXTENDED=y +# CONFIG_SERIAL_8250_MANY_PORTS is not set +CONFIG_SERIAL_8250_SHARE_IRQ=y +# CONFIG_SERIAL_8250_DETECT_IRQ is not set +# CONFIG_SERIAL_8250_RSA is not set + +# +# Non-8250 serial port support +# +# CONFIG_SERIAL_UARTLITE is not set +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_SERIAL_OF_PLATFORM=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +# CONFIG_HW_RANDOM is not set +# CONFIG_NVRAM is not set +# CONFIG_GEN_RTC is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y +# CONFIG_I2C is not set + +# +# SPI support +# +# CONFIG_SPI is not set +# CONFIG_SPI_MASTER is not set +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +# CONFIG_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_SM501 is not set + +# +# Multimedia devices +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_DVB_CORE is not set +CONFIG_DAB=y + +# +# Graphics support +# +# CONFIG_AGP is not set +# CONFIG_DRM is not set +# CONFIG_VGASTATE is not set +CONFIG_VIDEO_OUTPUT_CONTROL=m +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Sound +# +# CONFIG_SOUND is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set +# CONFIG_MMC is not set +# CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set +# CONFIG_EDAC is not set +# CONFIG_RTC_CLASS is not set + +# +# Userspace I/O +# +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +# CONFIG_EXT3_FS is not set +# CONFIG_EXT4DEV_FS is not set +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +# CONFIG_FS_POSIX_ACL is not set +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +# CONFIG_OCFS2_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_KCORE=y +CONFIG_PROC_SYSCTL=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +# CONFIG_TMPFS_POSIX_ACL is not set +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set +CONFIG_NETWORK_FILESYSTEMS=y +CONFIG_NFS_FS=y +CONFIG_NFS_V3=y +# CONFIG_NFS_V3_ACL is not set +# CONFIG_NFS_V4 is not set +# CONFIG_NFS_DIRECTIO is not set +# CONFIG_NFSD is not set +CONFIG_ROOT_NFS=y +CONFIG_LOCKD=y +CONFIG_LOCKD_V4=y +CONFIG_NFS_COMMON=y +CONFIG_SUNRPC=y +# CONFIG_SUNRPC_BIND34 is not set +# CONFIG_RPCSEC_GSS_KRB5 is not set +# CONFIG_RPCSEC_GSS_SPKM3 is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set +# CONFIG_DLM is not set +# CONFIG_UCC_SLOW is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_IOPORT=y +CONFIG_HAS_DMA=y +CONFIG_INSTRUMENTATION=y +# CONFIG_PROFILING is not set +# CONFIG_KPROBES is not set +# CONFIG_MARKERS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_RT_MUTEX_TESTER is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_BUGVERBOSE is not set +# CONFIG_DEBUG_INFO is not set +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FORCED_INLINING=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_SAMPLES is not set +# CONFIG_DEBUG_STACKOVERFLOW is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_DEBUG_PAGEALLOC is not set +CONFIG_DEBUGGER=y +# CONFIG_KGDB is not set +# CONFIG_XMON is not set +# CONFIG_BDI_SWITCH is not set +# CONFIG_PPC_EARLY_DEBUG is not set + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +CONFIG_CRYPTO=y +CONFIG_CRYPTO_ALGAPI=y +CONFIG_CRYPTO_BLKCIPHER=y +CONFIG_CRYPTO_MANAGER=y +# CONFIG_CRYPTO_HMAC is not set +# CONFIG_CRYPTO_XCBC is not set +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=y +# CONFIG_CRYPTO_SHA1 is not set +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +# CONFIG_CRYPTO_GF128MUL is not set +CONFIG_CRYPTO_ECB=y +CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_PCBC=y +# CONFIG_CRYPTO_LRW is not set +# CONFIG_CRYPTO_XTS is not set +# CONFIG_CRYPTO_CRYPTD is not set +CONFIG_CRYPTO_DES=y +# CONFIG_CRYPTO_FCRYPT is not set +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +# CONFIG_CRYPTO_AES is not set +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +# CONFIG_CRYPTO_ARC4 is not set +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +# CONFIG_CRYPTO_SEED is not set +# CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_CAMELLIA is not set +# CONFIG_CRYPTO_TEST is not set +# CONFIG_CRYPTO_AUTHENC is not set +CONFIG_CRYPTO_HW=y +# CONFIG_PPC_CLOCK is not set diff --git a/arch/powerpc/configs/walnut_defconfig b/arch/powerpc/configs/walnut_defconfig index 79344639b7c..e431128e8e9 100644 --- a/arch/powerpc/configs/walnut_defconfig +++ b/arch/powerpc/configs/walnut_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.24-rc4 -# Thu Dec 6 16:49:33 2007 +# Linux kernel version: 2.6.24-rc6 +# Mon Dec 24 11:23:58 2007 # # CONFIG_PPC64 is not set @@ -40,7 +40,7 @@ CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y CONFIG_ARCH_MAY_HAVE_PC_FDC=y CONFIG_PPC_OF=y CONFIG_OF=y -# CONFIG_PPC_UDBG_16550 is not set +CONFIG_PPC_UDBG_16550=y # CONFIG_GENERIC_TBSYNC is not set CONFIG_AUDIT_ARCH=y CONFIG_GENERIC_BUG=y @@ -127,6 +127,7 @@ CONFIG_DEFAULT_AS=y # CONFIG_DEFAULT_CFQ is not set # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="anticipatory" +# CONFIG_PPC4xx_PCI_EXPRESS is not set # # Platform support @@ -136,7 +137,9 @@ CONFIG_DEFAULT_IOSCHED="anticipatory" # CONFIG_PPC_CELL is not set # CONFIG_PPC_CELL_NATIVE is not set # CONFIG_PQ2ADS is not set +# CONFIG_EP405 is not set # CONFIG_KILAUEA is not set +# CONFIG_MAKALU is not set CONFIG_WALNUT=y # CONFIG_XILINX_VIRTEX_GENERIC_BOARD is not set CONFIG_405GP=y @@ -204,11 +207,17 @@ CONFIG_ISA_DMA_API=y # Bus options # CONFIG_ZONE_DMA=y -# CONFIG_PCI is not set -# CONFIG_PCI_DOMAINS is not set -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set +CONFIG_PPC_INDIRECT_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCI_SYSCALL=y +# CONFIG_PCIEPORTBUS is not set +CONFIG_ARCH_SUPPORTS_MSI=y +# CONFIG_PCI_MSI is not set +# CONFIG_PCI_LEGACY is not set +# CONFIG_PCI_DEBUG is not set # CONFIG_PCCARD is not set +# CONFIG_HOTPLUG_PCI is not set # # Advanced setup @@ -373,11 +382,13 @@ CONFIG_MTD_CFI_UTIL=y # CONFIG_MTD_COMPLEX_MAPPINGS is not set # CONFIG_MTD_PHYSMAP is not set CONFIG_MTD_PHYSMAP_OF=y +# CONFIG_MTD_INTEL_VR_NOR is not set # CONFIG_MTD_PLATRAM is not set # # Self-contained MTD device drivers # +# CONFIG_MTD_PMC551 is not set # CONFIG_MTD_SLRAM is not set # CONFIG_MTD_PHRAM is not set # CONFIG_MTD_MTDRAM is not set @@ -400,9 +411,14 @@ CONFIG_OF_DEVICE=y # CONFIG_PARPORT is not set CONFIG_BLK_DEV=y # CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set # CONFIG_BLK_DEV_COW_COMMON is not set # CONFIG_BLK_DEV_LOOP is not set # CONFIG_BLK_DEV_NBD is not set +# CONFIG_BLK_DEV_SX8 is not set CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=35000 @@ -411,7 +427,10 @@ CONFIG_BLK_DEV_RAM_BLOCKSIZE=1024 # CONFIG_ATA_OVER_ETH is not set # CONFIG_XILINX_SYSACE is not set CONFIG_MISC_DEVICES=y +# CONFIG_PHANTOM is not set # CONFIG_EEPROM_93CX6 is not set +# CONFIG_SGI_IOC4 is not set +# CONFIG_TIFM_CORE is not set # CONFIG_IDE is not set # @@ -423,6 +442,14 @@ CONFIG_MISC_DEVICES=y # CONFIG_SCSI_NETLINK is not set # CONFIG_ATA is not set # CONFIG_MD is not set +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_FIREWIRE is not set +# CONFIG_IEEE1394 is not set +# CONFIG_I2O is not set # CONFIG_MACINTOSH_DRIVERS is not set CONFIG_NETDEVICES=y # CONFIG_NETDEVICES_MULTIQUEUE is not set @@ -432,9 +459,17 @@ CONFIG_NETDEVICES=y # CONFIG_EQUALIZER is not set # CONFIG_TUN is not set # CONFIG_VETH is not set +# CONFIG_IP1000 is not set +# CONFIG_ARCNET is not set # CONFIG_PHYLIB is not set CONFIG_NET_ETHERNET=y # CONFIG_MII is not set +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +# CONFIG_CASSINI is not set +# CONFIG_NET_VENDOR_3COM is not set +# CONFIG_NET_TULIP is not set +# CONFIG_HP100 is not set CONFIG_IBM_NEW_EMAC=y CONFIG_IBM_NEW_EMAC_RXB=128 CONFIG_IBM_NEW_EMAC_TXB=64 @@ -446,9 +481,38 @@ CONFIG_IBM_NEW_EMAC_ZMII=y # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_NET_PCI is not set # CONFIG_B44 is not set CONFIG_NETDEV_1000=y +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_E1000E is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SIS190 is not set +# CONFIG_SKGE is not set +# CONFIG_SKY2 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set +# CONFIG_QLA3XXX is not set +# CONFIG_ATL1 is not set CONFIG_NETDEV_10000=y +# CONFIG_CHELSIO_T1 is not set +# CONFIG_CHELSIO_T3 is not set +# CONFIG_IXGBE is not set +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set +# CONFIG_MYRI10GE is not set +# CONFIG_NETXEN_NIC is not set +# CONFIG_NIU is not set +# CONFIG_MLX4_CORE is not set +# CONFIG_TEHUTI is not set +# CONFIG_TR is not set # # Wireless LAN @@ -456,6 +520,8 @@ CONFIG_NETDEV_10000=y # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set # CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # CONFIG_SHAPER is not set @@ -487,6 +553,7 @@ CONFIG_NETDEV_10000=y # CONFIG_SERIAL_8250=y CONFIG_SERIAL_8250_CONSOLE=y +CONFIG_SERIAL_8250_PCI=y CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 CONFIG_SERIAL_8250_EXTENDED=y @@ -501,6 +568,7 @@ CONFIG_SERIAL_8250_SHARE_IRQ=y # CONFIG_SERIAL_UARTLITE is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set CONFIG_SERIAL_OF_PLATFORM=y CONFIG_UNIX98_PTYS=y CONFIG_LEGACY_PTYS=y @@ -510,8 +578,10 @@ CONFIG_LEGACY_PTY_COUNT=256 # CONFIG_NVRAM is not set # CONFIG_GEN_RTC is not set # CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set # CONFIG_TCG_TPM is not set +CONFIG_DEVPORT=y # CONFIG_I2C is not set # @@ -545,6 +615,8 @@ CONFIG_SSB_POSSIBLE=y # # Graphics support # +# CONFIG_AGP is not set +# CONFIG_DRM is not set # CONFIG_VGASTATE is not set CONFIG_VIDEO_OUTPUT_CONTROL=m # CONFIG_FB is not set @@ -560,9 +632,10 @@ CONFIG_VIDEO_OUTPUT_CONTROL=m # # CONFIG_SOUND is not set CONFIG_USB_SUPPORT=y -# CONFIG_USB_ARCH_HAS_HCD is not set -# CONFIG_USB_ARCH_HAS_OHCI is not set -# CONFIG_USB_ARCH_HAS_EHCI is not set +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB_ARCH_HAS_EHCI=y +# CONFIG_USB is not set # # NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' @@ -574,6 +647,7 @@ CONFIG_USB_SUPPORT=y # CONFIG_USB_GADGET is not set # CONFIG_MMC is not set # CONFIG_NEW_LEDS is not set +# CONFIG_INFINIBAND is not set # CONFIG_EDAC is not set # CONFIG_RTC_CLASS is not set diff --git a/arch/powerpc/kernel/cpu_setup_44x.S b/arch/powerpc/kernel/cpu_setup_44x.S index 8e1812e2f3e..6250443ab9c 100644 --- a/arch/powerpc/kernel/cpu_setup_44x.S +++ b/arch/powerpc/kernel/cpu_setup_44x.S @@ -23,11 +23,24 @@ _GLOBAL(__setup_cpu_440epx) mflr r4 bl __init_fpu_44x bl __plb_disable_wrp + bl __fixup_440A_mcheck mtlr r4 blr _GLOBAL(__setup_cpu_440grx) - b __plb_disable_wrp + mflr r4 + bl __plb_disable_wrp + bl __fixup_440A_mcheck + mtlr r4 + blr +_GLOBAL(__setup_cpu_440gx) +_GLOBAL(__setup_cpu_440spe) + b __fixup_440A_mcheck + /* Temporary fixup for arch/ppc until we kill the whole thing */ +#ifndef CONFIG_PPC_MERGE +_GLOBAL(__fixup_440A_mcheck) + blr +#endif /* enable APU between CPU and FPU */ _GLOBAL(__init_fpu_44x) diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index 7c21f52d982..f1928af5fcf 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -33,7 +33,9 @@ EXPORT_SYMBOL(cur_cpu_spec); #ifdef CONFIG_PPC32 extern void __setup_cpu_440ep(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_440epx(unsigned long offset, struct cpu_spec* spec); +extern void __setup_cpu_440gx(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_440grx(unsigned long offset, struct cpu_spec* spec); +extern void __setup_cpu_440spe(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_603(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_604(unsigned long offset, struct cpu_spec* spec); extern void __setup_cpu_750(unsigned long offset, struct cpu_spec* spec); @@ -85,6 +87,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/power3", .oprofile_type = PPC_OPROFILE_RS64, + .machine_check = machine_check_generic, .platform = "power3", }, { /* Power3+ */ @@ -99,6 +102,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/power3", .oprofile_type = PPC_OPROFILE_RS64, + .machine_check = machine_check_generic, .platform = "power3", }, { /* Northstar */ @@ -113,6 +117,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/rs64", .oprofile_type = PPC_OPROFILE_RS64, + .machine_check = machine_check_generic, .platform = "rs64", }, { /* Pulsar */ @@ -127,6 +132,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/rs64", .oprofile_type = PPC_OPROFILE_RS64, + .machine_check = machine_check_generic, .platform = "rs64", }, { /* I-star */ @@ -141,6 +147,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/rs64", .oprofile_type = PPC_OPROFILE_RS64, + .machine_check = machine_check_generic, .platform = "rs64", }, { /* S-star */ @@ -155,6 +162,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/rs64", .oprofile_type = PPC_OPROFILE_RS64, + .machine_check = machine_check_generic, .platform = "rs64", }, { /* Power4 */ @@ -169,6 +177,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/power4", .oprofile_type = PPC_OPROFILE_POWER4, + .machine_check = machine_check_generic, .platform = "power4", }, { /* Power4+ */ @@ -183,6 +192,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/power4", .oprofile_type = PPC_OPROFILE_POWER4, + .machine_check = machine_check_generic, .platform = "power4", }, { /* PPC970 */ @@ -200,6 +210,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_restore = __restore_cpu_ppc970, .oprofile_cpu_type = "ppc64/970", .oprofile_type = PPC_OPROFILE_POWER4, + .machine_check = machine_check_generic, .platform = "ppc970", }, { /* PPC970FX */ @@ -217,6 +228,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_restore = __restore_cpu_ppc970, .oprofile_cpu_type = "ppc64/970", .oprofile_type = PPC_OPROFILE_POWER4, + .machine_check = machine_check_generic, .platform = "ppc970", }, { /* PPC970MP DD1.0 - no DEEPNAP, use regular 970 init */ @@ -234,6 +246,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_restore = __restore_cpu_ppc970, .oprofile_cpu_type = "ppc64/970MP", .oprofile_type = PPC_OPROFILE_POWER4, + .machine_check = machine_check_generic, .platform = "ppc970", }, { /* PPC970MP */ @@ -251,6 +264,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_restore = __restore_cpu_ppc970, .oprofile_cpu_type = "ppc64/970MP", .oprofile_type = PPC_OPROFILE_POWER4, + .machine_check = machine_check_generic, .platform = "ppc970", }, { /* PPC970GX */ @@ -267,6 +281,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_ppc970, .oprofile_cpu_type = "ppc64/970", .oprofile_type = PPC_OPROFILE_POWER4, + .machine_check = machine_check_generic, .platform = "ppc970", }, { /* Power5 GR */ @@ -286,6 +301,7 @@ static struct cpu_spec __initdata cpu_specs[] = { */ .oprofile_mmcra_sihv = MMCRA_SIHV, .oprofile_mmcra_sipr = MMCRA_SIPR, + .machine_check = machine_check_generic, .platform = "power5", }, { /* Power5++ */ @@ -301,6 +317,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .oprofile_type = PPC_OPROFILE_POWER4, .oprofile_mmcra_sihv = MMCRA_SIHV, .oprofile_mmcra_sipr = MMCRA_SIPR, + .machine_check = machine_check_generic, .platform = "power5+", }, { /* Power5 GS */ @@ -317,6 +334,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .oprofile_type = PPC_OPROFILE_POWER4, .oprofile_mmcra_sihv = MMCRA_SIHV, .oprofile_mmcra_sipr = MMCRA_SIPR, + .machine_check = machine_check_generic, .platform = "power5+", }, { /* POWER6 in P5+ mode; 2.04-compliant processor */ @@ -327,6 +345,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_user_features = COMMON_USER_POWER5_PLUS, .icache_bsize = 128, .dcache_bsize = 128, + .machine_check = machine_check_generic, .platform = "power5+", }, { /* Power6 */ @@ -346,6 +365,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .oprofile_mmcra_sipr = POWER6_MMCRA_SIPR, .oprofile_mmcra_clear = POWER6_MMCRA_THRM | POWER6_MMCRA_OTHER, + .machine_check = machine_check_generic, .platform = "power6x", }, { /* 2.05-compliant processor, i.e. Power6 "architected" mode */ @@ -356,6 +376,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_user_features = COMMON_USER_POWER6, .icache_bsize = 128, .dcache_bsize = 128, + .machine_check = machine_check_generic, .platform = "power6", }, { /* Cell Broadband Engine */ @@ -372,6 +393,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .pmc_type = PPC_PMC_IBM, .oprofile_cpu_type = "ppc64/cell-be", .oprofile_type = PPC_OPROFILE_CELL, + .machine_check = machine_check_generic, .platform = "ppc-cell-be", }, { /* PA Semi PA6T */ @@ -388,6 +410,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_restore = __restore_cpu_pa6t, .oprofile_cpu_type = "ppc64/pa6t", .oprofile_type = PPC_OPROFILE_PA6T, + .machine_check = machine_check_generic, .platform = "pa6t", }, { /* default match */ @@ -400,6 +423,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 128, .num_pmcs = 6, .pmc_type = PPC_PMC_IBM, + .machine_check = machine_check_generic, .platform = "power4", } #endif /* CONFIG_PPC64 */ @@ -414,6 +438,7 @@ static struct cpu_spec __initdata cpu_specs[] = { PPC_FEATURE_UNIFIED_CACHE | PPC_FEATURE_NO_TB, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_generic, .platform = "ppc601", }, { /* 603 */ @@ -425,6 +450,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .cpu_setup = __setup_cpu_603, + .machine_check = machine_check_generic, .platform = "ppc603", }, { /* 603e */ @@ -436,6 +462,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .cpu_setup = __setup_cpu_603, + .machine_check = machine_check_generic, .platform = "ppc603", }, { /* 603ev */ @@ -447,6 +474,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .cpu_setup = __setup_cpu_603, + .machine_check = machine_check_generic, .platform = "ppc603", }, { /* 604 */ @@ -459,6 +487,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 2, .cpu_setup = __setup_cpu_604, + .machine_check = machine_check_generic, .platform = "ppc604", }, { /* 604e */ @@ -471,6 +500,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, .cpu_setup = __setup_cpu_604, + .machine_check = machine_check_generic, .platform = "ppc604", }, { /* 604r */ @@ -483,6 +513,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, .cpu_setup = __setup_cpu_604, + .machine_check = machine_check_generic, .platform = "ppc604", }, { /* 604ev */ @@ -495,6 +526,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, .cpu_setup = __setup_cpu_604, + .machine_check = machine_check_generic, .platform = "ppc604", }, { /* 740/750 (0x4202, don't support TAU ?) */ @@ -507,6 +539,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, .cpu_setup = __setup_cpu_750, + .machine_check = machine_check_generic, .platform = "ppc750", }, { /* 750CX (80100 and 8010x?) */ @@ -519,6 +552,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, .cpu_setup = __setup_cpu_750cx, + .machine_check = machine_check_generic, .platform = "ppc750", }, { /* 750CX (82201 and 82202) */ @@ -531,6 +565,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, .cpu_setup = __setup_cpu_750cx, + .machine_check = machine_check_generic, .platform = "ppc750", }, { /* 750CXe (82214) */ @@ -543,6 +578,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, .cpu_setup = __setup_cpu_750cx, + .machine_check = machine_check_generic, .platform = "ppc750", }, { /* 750CXe "Gekko" (83214) */ @@ -555,6 +591,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, .cpu_setup = __setup_cpu_750cx, + .machine_check = machine_check_generic, .platform = "ppc750", }, { /* 750CL */ @@ -567,6 +604,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, .cpu_setup = __setup_cpu_750, + .machine_check = machine_check_generic, .platform = "ppc750", }, { /* 745/755 */ @@ -579,6 +617,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, .cpu_setup = __setup_cpu_750, + .machine_check = machine_check_generic, .platform = "ppc750", }, { /* 750FX rev 1.x */ @@ -591,6 +630,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, .cpu_setup = __setup_cpu_750, + .machine_check = machine_check_generic, .platform = "ppc750", }, { /* 750FX rev 2.0 must disable HID0[DPM] */ @@ -603,6 +643,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, .cpu_setup = __setup_cpu_750, + .machine_check = machine_check_generic, .platform = "ppc750", }, { /* 750FX (All revs except 2.0) */ @@ -615,6 +656,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, .cpu_setup = __setup_cpu_750fx, + .machine_check = machine_check_generic, .platform = "ppc750", }, { /* 750GX */ @@ -627,6 +669,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, .cpu_setup = __setup_cpu_750fx, + .machine_check = machine_check_generic, .platform = "ppc750", }, { /* 740/750 (L2CR bit need fixup for 740) */ @@ -639,6 +682,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, .cpu_setup = __setup_cpu_750, + .machine_check = machine_check_generic, .platform = "ppc750", }, { /* 7400 rev 1.1 ? (no TAU) */ @@ -652,6 +696,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, .cpu_setup = __setup_cpu_7400, + .machine_check = machine_check_generic, .platform = "ppc7400", }, { /* 7400 */ @@ -665,6 +710,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, .cpu_setup = __setup_cpu_7400, + .machine_check = machine_check_generic, .platform = "ppc7400", }, { /* 7410 */ @@ -678,6 +724,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .dcache_bsize = 32, .num_pmcs = 4, .cpu_setup = __setup_cpu_7410, + .machine_check = machine_check_generic, .platform = "ppc7400", }, { /* 7450 2.0 - no doze/nap */ @@ -693,6 +740,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_745x, .oprofile_cpu_type = "ppc/7450", .oprofile_type = PPC_OPROFILE_G4, + .machine_check = machine_check_generic, .platform = "ppc7450", }, { /* 7450 2.1 */ @@ -708,6 +756,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_745x, .oprofile_cpu_type = "ppc/7450", .oprofile_type = PPC_OPROFILE_G4, + .machine_check = machine_check_generic, .platform = "ppc7450", }, { /* 7450 2.3 and newer */ @@ -723,6 +772,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_745x, .oprofile_cpu_type = "ppc/7450", .oprofile_type = PPC_OPROFILE_G4, + .machine_check = machine_check_generic, .platform = "ppc7450", }, { /* 7455 rev 1.x */ @@ -738,6 +788,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_745x, .oprofile_cpu_type = "ppc/7450", .oprofile_type = PPC_OPROFILE_G4, + .machine_check = machine_check_generic, .platform = "ppc7450", }, { /* 7455 rev 2.0 */ @@ -753,6 +804,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_745x, .oprofile_cpu_type = "ppc/7450", .oprofile_type = PPC_OPROFILE_G4, + .machine_check = machine_check_generic, .platform = "ppc7450", }, { /* 7455 others */ @@ -768,6 +820,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_745x, .oprofile_cpu_type = "ppc/7450", .oprofile_type = PPC_OPROFILE_G4, + .machine_check = machine_check_generic, .platform = "ppc7450", }, { /* 7447/7457 Rev 1.0 */ @@ -783,6 +836,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_745x, .oprofile_cpu_type = "ppc/7450", .oprofile_type = PPC_OPROFILE_G4, + .machine_check = machine_check_generic, .platform = "ppc7450", }, { /* 7447/7457 Rev 1.1 */ @@ -798,6 +852,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_745x, .oprofile_cpu_type = "ppc/7450", .oprofile_type = PPC_OPROFILE_G4, + .machine_check = machine_check_generic, .platform = "ppc7450", }, { /* 7447/7457 Rev 1.2 and later */ @@ -812,6 +867,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_745x, .oprofile_cpu_type = "ppc/7450", .oprofile_type = PPC_OPROFILE_G4, + .machine_check = machine_check_generic, .platform = "ppc7450", }, { /* 7447A */ @@ -827,6 +883,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_745x, .oprofile_cpu_type = "ppc/7450", .oprofile_type = PPC_OPROFILE_G4, + .machine_check = machine_check_generic, .platform = "ppc7450", }, { /* 7448 */ @@ -842,6 +899,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_setup = __setup_cpu_745x, .oprofile_cpu_type = "ppc/7450", .oprofile_type = PPC_OPROFILE_G4, + .machine_check = machine_check_generic, .platform = "ppc7450", }, { /* 82xx (8240, 8245, 8260 are all 603e cores) */ @@ -853,6 +911,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .cpu_setup = __setup_cpu_603, + .machine_check = machine_check_generic, .platform = "ppc603", }, { /* All G2_LE (603e core, plus some) have the same pvr */ @@ -864,6 +923,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .cpu_setup = __setup_cpu_603, + .machine_check = machine_check_generic, .platform = "ppc603", }, { /* e300c1 (a 603e core, plus some) on 83xx */ @@ -875,6 +935,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .cpu_setup = __setup_cpu_603, + .machine_check = machine_check_generic, .platform = "ppc603", }, { /* e300c2 (an e300c1 core, plus some, minus FPU) on 83xx */ @@ -886,6 +947,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .cpu_setup = __setup_cpu_603, + .machine_check = machine_check_generic, .platform = "ppc603", }, { /* e300c3 (e300c1, plus one IU, half cache size) on 83xx */ @@ -908,6 +970,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .cpu_setup = __setup_cpu_603, + .machine_check = machine_check_generic, .platform = "ppc603", }, { /* default match, we assume split I/D cache & TB (non-601)... */ @@ -918,6 +981,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_user_features = COMMON_USER, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_generic, .platform = "ppc603", }, #endif /* CLASSIC_PPC */ @@ -944,6 +1008,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU, .icache_bsize = 16, .dcache_bsize = 16, + .machine_check = machine_check_4xx, .platform = "ppc403", }, { /* 403GCX */ @@ -955,6 +1020,7 @@ static struct cpu_spec __initdata cpu_specs[] = { PPC_FEATURE_HAS_MMU | PPC_FEATURE_NO_TB, .icache_bsize = 16, .dcache_bsize = 16, + .machine_check = machine_check_4xx, .platform = "ppc403", }, { /* 403G ?? */ @@ -965,6 +1031,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU, .icache_bsize = 16, .dcache_bsize = 16, + .machine_check = machine_check_4xx, .platform = "ppc403", }, { /* 405GP */ @@ -976,6 +1043,7 @@ static struct cpu_spec __initdata cpu_specs[] = { PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_4xx, .platform = "ppc405", }, { /* STB 03xxx */ @@ -987,6 +1055,7 @@ static struct cpu_spec __initdata cpu_specs[] = { PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_4xx, .platform = "ppc405", }, { /* STB 04xxx */ @@ -998,6 +1067,7 @@ static struct cpu_spec __initdata cpu_specs[] = { PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_4xx, .platform = "ppc405", }, { /* NP405L */ @@ -1009,6 +1079,7 @@ static struct cpu_spec __initdata cpu_specs[] = { PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_4xx, .platform = "ppc405", }, { /* NP4GS3 */ @@ -1020,6 +1091,7 @@ static struct cpu_spec __initdata cpu_specs[] = { PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_4xx, .platform = "ppc405", }, { /* NP405H */ @@ -1031,6 +1103,7 @@ static struct cpu_spec __initdata cpu_specs[] = { PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_4xx, .platform = "ppc405", }, { /* 405GPr */ @@ -1042,6 +1115,7 @@ static struct cpu_spec __initdata cpu_specs[] = { PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_4xx, .platform = "ppc405", }, { /* STBx25xx */ @@ -1053,6 +1127,7 @@ static struct cpu_spec __initdata cpu_specs[] = { PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_4xx, .platform = "ppc405", }, { /* 405LP */ @@ -1063,6 +1138,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_user_features = PPC_FEATURE_32 | PPC_FEATURE_HAS_MMU, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_4xx, .platform = "ppc405", }, { /* Xilinx Virtex-II Pro */ @@ -1074,6 +1150,7 @@ static struct cpu_spec __initdata cpu_specs[] = { PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_4xx, .platform = "ppc405", }, { /* Xilinx Virtex-4 FX */ @@ -1085,6 +1162,7 @@ static struct cpu_spec __initdata cpu_specs[] = { PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_4xx, .platform = "ppc405", }, { /* 405EP */ @@ -1096,6 +1174,7 @@ static struct cpu_spec __initdata cpu_specs[] = { PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_4xx, .platform = "ppc405", }, { /* 405EX */ @@ -1107,6 +1186,7 @@ static struct cpu_spec __initdata cpu_specs[] = { PPC_FEATURE_HAS_MMU | PPC_FEATURE_HAS_4xxMAC, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_4xx, .platform = "ppc405", }, @@ -1120,6 +1200,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_user_features = COMMON_USER_BOOKE, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_4xx, .platform = "ppc440", }, { /* Use logical PVR for 440EP (logical pvr = pvr | 0x8) */ @@ -1131,6 +1212,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .cpu_setup = __setup_cpu_440ep, + .machine_check = machine_check_4xx, .platform = "ppc440", }, { @@ -1141,6 +1223,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_user_features = COMMON_USER_BOOKE | PPC_FEATURE_HAS_FPU, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_4xx, .platform = "ppc440", }, { /* Use logical PVR for 440EP (logical pvr = pvr | 0x8) */ @@ -1152,6 +1235,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .cpu_setup = __setup_cpu_440ep, + .machine_check = machine_check_4xx, .platform = "ppc440", }, { /* 440GRX */ @@ -1163,6 +1247,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .cpu_setup = __setup_cpu_440grx, + .machine_check = machine_check_440A, .platform = "ppc440", }, { /* Use logical PVR for 440EPx (logical pvr = pvr | 0x8) */ @@ -1174,6 +1259,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 32, .dcache_bsize = 32, .cpu_setup = __setup_cpu_440epx, + .machine_check = machine_check_440A, .platform = "ppc440", }, { /* 440GP Rev. B */ @@ -1184,6 +1270,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_user_features = COMMON_USER_BOOKE, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_4xx, .platform = "ppc440gp", }, { /* 440GP Rev. C */ @@ -1194,6 +1281,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_user_features = COMMON_USER_BOOKE, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_4xx, .platform = "ppc440gp", }, { /* 440GX Rev. A */ @@ -1204,6 +1292,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_user_features = COMMON_USER_BOOKE, .icache_bsize = 32, .dcache_bsize = 32, + .cpu_setup = __setup_cpu_440gx, + .machine_check = machine_check_440A, .platform = "ppc440", }, { /* 440GX Rev. B */ @@ -1214,6 +1304,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_user_features = COMMON_USER_BOOKE, .icache_bsize = 32, .dcache_bsize = 32, + .cpu_setup = __setup_cpu_440gx, + .machine_check = machine_check_440A, .platform = "ppc440", }, { /* 440GX Rev. C */ @@ -1224,6 +1316,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_user_features = COMMON_USER_BOOKE, .icache_bsize = 32, .dcache_bsize = 32, + .cpu_setup = __setup_cpu_440gx, + .machine_check = machine_check_440A, .platform = "ppc440", }, { /* 440GX Rev. F */ @@ -1234,6 +1328,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_user_features = COMMON_USER_BOOKE, .icache_bsize = 32, .dcache_bsize = 32, + .cpu_setup = __setup_cpu_440gx, + .machine_check = machine_check_440A, .platform = "ppc440", }, { /* 440SP Rev. A */ @@ -1244,6 +1340,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_user_features = COMMON_USER_BOOKE, .icache_bsize = 32, .dcache_bsize = 32, + .machine_check = machine_check_4xx, .platform = "ppc440", }, { /* 440SPe Rev. A */ @@ -1254,6 +1351,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_user_features = COMMON_USER_BOOKE, .icache_bsize = 32, .dcache_bsize = 32, + .cpu_setup = __setup_cpu_440spe, + .machine_check = machine_check_440A, .platform = "ppc440", }, { /* 440SPe Rev. B */ @@ -1264,10 +1363,13 @@ static struct cpu_spec __initdata cpu_specs[] = { .cpu_user_features = COMMON_USER_BOOKE, .icache_bsize = 32, .dcache_bsize = 32, + .cpu_setup = __setup_cpu_440spe, + .machine_check = machine_check_440A, .platform = "ppc440", }, #endif /* CONFIG_44x */ #ifdef CONFIG_FSL_BOOKE +#ifdef CONFIG_E200 { /* e200z5 */ .pvr_mask = 0xfff00000, .pvr_value = 0x81000000, @@ -1278,6 +1380,7 @@ static struct cpu_spec __initdata cpu_specs[] = { PPC_FEATURE_HAS_EFP_SINGLE | PPC_FEATURE_UNIFIED_CACHE, .dcache_bsize = 32, + .machine_check = machine_check_e200, .platform = "ppc5554", }, { /* e200z6 */ @@ -1291,8 +1394,10 @@ static struct cpu_spec __initdata cpu_specs[] = { PPC_FEATURE_HAS_EFP_SINGLE_COMP | PPC_FEATURE_UNIFIED_CACHE, .dcache_bsize = 32, + .machine_check = machine_check_e200, .platform = "ppc5554", }, +#elif defined(CONFIG_E500) { /* e500 */ .pvr_mask = 0xffff0000, .pvr_value = 0x80200000, @@ -1307,6 +1412,7 @@ static struct cpu_spec __initdata cpu_specs[] = { .num_pmcs = 4, .oprofile_cpu_type = "ppc/e500", .oprofile_type = PPC_OPROFILE_BOOKE, + .machine_check = machine_check_e500, .platform = "ppc8540", }, { /* e500v2 */ @@ -1324,9 +1430,11 @@ static struct cpu_spec __initdata cpu_specs[] = { .num_pmcs = 4, .oprofile_cpu_type = "ppc/e500", .oprofile_type = PPC_OPROFILE_BOOKE, + .machine_check = machine_check_e500, .platform = "ppc8548", }, #endif +#endif #if !CLASSIC_PPC { /* default match */ .pvr_mask = 0x00000000, diff --git a/arch/powerpc/kernel/head_44x.S b/arch/powerpc/kernel/head_44x.S index 56aba84c1f6..ad071a146a8 100644 --- a/arch/powerpc/kernel/head_44x.S +++ b/arch/powerpc/kernel/head_44x.S @@ -289,11 +289,8 @@ interrupt_base: CRITICAL_EXCEPTION(0x0100, CriticalInput, unknown_exception) /* Machine Check Interrupt */ -#ifdef CONFIG_440A - MCHECK_EXCEPTION(0x0200, MachineCheck, machine_check_exception) -#else CRITICAL_EXCEPTION(0x0200, MachineCheck, machine_check_exception) -#endif + MCHECK_EXCEPTION(0x0210, MachineCheckA, machine_check_exception) /* Data Storage Interrupt */ START_EXCEPTION(DataStorage) @@ -674,6 +671,15 @@ finish_tlb_load: */ /* + * Adjust the machine check IVOR on 440A cores + */ +_GLOBAL(__fixup_440A_mcheck) + li r3,MachineCheckA@l + mtspr SPRN_IVOR1,r3 + sync + blr + +/* * extern void giveup_altivec(struct task_struct *prev) * * The 44x core does not have an AltiVec unit. diff --git a/arch/powerpc/kernel/head_booke.h b/arch/powerpc/kernel/head_booke.h index 8536e767616..ba9393f8e77 100644 --- a/arch/powerpc/kernel/head_booke.h +++ b/arch/powerpc/kernel/head_booke.h @@ -166,7 +166,7 @@ label: mfspr r5,SPRN_ESR; \ stw r5,_ESR(r11); \ addi r3,r1,STACK_FRAME_OVERHEAD; \ - EXC_XFER_TEMPLATE(hdlr, n+2, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ + EXC_XFER_TEMPLATE(hdlr, n+4, (MSR_KERNEL & ~(MSR_ME|MSR_DE|MSR_CE)), \ NOCOPY, mcheck_transfer_to_handler, \ ret_from_mcheck_exc) diff --git a/arch/powerpc/kernel/misc_32.S b/arch/powerpc/kernel/misc_32.S index ea1137851a4..be09f0d2d90 100644 --- a/arch/powerpc/kernel/misc_32.S +++ b/arch/powerpc/kernel/misc_32.S @@ -206,6 +206,45 @@ _GLOBAL(_nmask_and_or_msr) isync blr /* Done */ +#ifdef CONFIG_40x + +/* + * Do an IO access in real mode + */ +_GLOBAL(real_readb) + mfmsr r7 + ori r0,r7,MSR_DR + xori r0,r0,MSR_DR + sync + mtmsr r0 + sync + isync + lbz r3,0(r3) + sync + mtmsr r7 + sync + isync + blr + + /* + * Do an IO access in real mode + */ +_GLOBAL(real_writeb) + mfmsr r7 + ori r0,r7,MSR_DR + xori r0,r0,MSR_DR + sync + mtmsr r0 + sync + isync + stb r3,0(r4) + sync + mtmsr r7 + sync + isync + blr + +#endif /* CONFIG_40x */ /* * Flush MMU TLB diff --git a/arch/powerpc/kernel/pci-common.c b/arch/powerpc/kernel/pci-common.c index 571854f2906..d394d41b61d 100644 --- a/arch/powerpc/kernel/pci-common.c +++ b/arch/powerpc/kernel/pci-common.c @@ -1035,7 +1035,7 @@ clear_resource: } } -static inline int __devinit alloc_resource(struct pci_dev *dev, int idx) +static inline void __devinit alloc_resource(struct pci_dev *dev, int idx) { struct resource *pr, *r = &dev->resource[idx]; @@ -1059,10 +1059,7 @@ static inline int __devinit alloc_resource(struct pci_dev *dev, int idx) r->flags |= IORESOURCE_UNSET; r->end -= r->start; r->start = 0; - - return -EBUSY; } - return 0; } static void __init pcibios_allocate_resources(int pass) @@ -1084,12 +1081,8 @@ static void __init pcibios_allocate_resources(int pass) disabled = !(command & PCI_COMMAND_IO); else disabled = !(command & PCI_COMMAND_MEMORY); - if (pass == disabled && alloc_resource(dev, idx)) { - command &= ~(r->flags & (IORESOURCE_IO | - IORESOURCE_MEM)); - pci_write_config_word(dev, - PCI_COMMAND, command); - } + if (pass == disabled) + alloc_resource(dev, idx); } if (pass) continue; diff --git a/arch/powerpc/kernel/prom.c b/arch/powerpc/kernel/prom.c index 6c2d8836f77..8b5efbce8d9 100644 --- a/arch/powerpc/kernel/prom.c +++ b/arch/powerpc/kernel/prom.c @@ -614,6 +614,29 @@ static struct feature_property { #endif /* CONFIG_PPC64 */ }; +#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU) +static inline void identical_pvr_fixup(unsigned long node) +{ + unsigned int pvr; + char *model = of_get_flat_dt_prop(node, "model", NULL); + + /* + * Since 440GR(x)/440EP(x) processors have the same pvr, + * we check the node path and set bit 28 in the cur_cpu_spec + * pvr for EP(x) processor version. This bit is always 0 in + * the "real" pvr. Then we call identify_cpu again with + * the new logical pvr to enable FPU support. + */ + if (model && strstr(model, "440EP")) { + pvr = cur_cpu_spec->pvr_value | 0x8; + identify_cpu(0, pvr); + DBG("Using logical pvr %x for %s\n", pvr, model); + } +} +#else +#define identical_pvr_fixup(node) do { } while(0) +#endif + static void __init check_cpu_feature_properties(unsigned long node) { unsigned long i; @@ -711,18 +734,8 @@ static int __init early_init_dt_scan_cpus(unsigned long node, prop = of_get_flat_dt_prop(node, "cpu-version", NULL); if (prop && (*prop & 0xff000000) == 0x0f000000) identify_cpu(0, *prop); -#if defined(CONFIG_44x) && defined(CONFIG_PPC_FPU) - /* - * Since 440GR(x)/440EP(x) processors have the same pvr, - * we check the node path and set bit 28 in the cur_cpu_spec - * pvr for EP(x) processor version. This bit is always 0 in - * the "real" pvr. Then we call identify_cpu again with - * the new logical pvr to enable FPU support. - */ - if (strstr(uname, "440EP")) { - identify_cpu(0, cur_cpu_spec->pvr_value | 0x8); - } -#endif + + identical_pvr_fixup(node); } check_cpu_feature_properties(node); diff --git a/arch/powerpc/kernel/traps.c b/arch/powerpc/kernel/traps.c index cad64840fce..848a20475db 100644 --- a/arch/powerpc/kernel/traps.c +++ b/arch/powerpc/kernel/traps.c @@ -334,18 +334,25 @@ static inline int check_io_access(struct pt_regs *regs) #define clear_single_step(regs) ((regs)->msr &= ~MSR_SE) #endif -static int generic_machine_check_exception(struct pt_regs *regs) +#if defined(CONFIG_4xx) +int machine_check_4xx(struct pt_regs *regs) { unsigned long reason = get_mc_reason(regs); -#if defined(CONFIG_4xx) && !defined(CONFIG_440A) if (reason & ESR_IMCP) { printk("Instruction"); mtspr(SPRN_ESR, reason & ~ESR_IMCP); } else printk("Data"); printk(" machine check in kernel mode.\n"); -#elif defined(CONFIG_440A) + + return 0; +} + +int machine_check_440A(struct pt_regs *regs) +{ + unsigned long reason = get_mc_reason(regs); + printk("Machine check in kernel mode.\n"); if (reason & ESR_IMCP){ printk("Instruction Synchronous Machine Check exception\n"); @@ -375,7 +382,13 @@ static int generic_machine_check_exception(struct pt_regs *regs) /* Clear MCSR */ mtspr(SPRN_MCSR, mcsr); } -#elif defined (CONFIG_E500) + return 0; +} +#elif defined(CONFIG_E500) +int machine_check_e500(struct pt_regs *regs) +{ + unsigned long reason = get_mc_reason(regs); + printk("Machine check in kernel mode.\n"); printk("Caused by (from MCSR=%lx): ", reason); @@ -403,7 +416,14 @@ static int generic_machine_check_exception(struct pt_regs *regs) printk("Bus - Instruction Parity Error\n"); if (reason & MCSR_BUS_RPERR) printk("Bus - Read Parity Error\n"); -#elif defined (CONFIG_E200) + + return 0; +} +#elif defined(CONFIG_E200) +int machine_check_e200(struct pt_regs *regs) +{ + unsigned long reason = get_mc_reason(regs); + printk("Machine check in kernel mode.\n"); printk("Caused by (from MCSR=%lx): ", reason); @@ -421,7 +441,14 @@ static int generic_machine_check_exception(struct pt_regs *regs) printk("Bus - Read Bus Error on data load\n"); if (reason & MCSR_BUS_WRERR) printk("Bus - Write Bus Error on buffered store or cache line push\n"); -#else /* !CONFIG_4xx && !CONFIG_E500 && !CONFIG_E200 */ + + return 0; +} +#else +int machine_check_generic(struct pt_regs *regs) +{ + unsigned long reason = get_mc_reason(regs); + printk("Machine check in kernel mode.\n"); printk("Caused by (from SRR1=%lx): ", reason); switch (reason & 0x601F0000) { @@ -451,22 +478,26 @@ static int generic_machine_check_exception(struct pt_regs *regs) default: printk("Unknown values in msr\n"); } -#endif /* CONFIG_4xx */ - return 0; } +#endif /* everything else */ void machine_check_exception(struct pt_regs *regs) { int recover = 0; - /* See if any machine dependent calls */ + /* See if any machine dependent calls. In theory, we would want + * to call the CPU first, and call the ppc_md. one if the CPU + * one returns a positive number. However there is existing code + * that assumes the board gets a first chance, so let's keep it + * that way for now and fix things later. --BenH. + */ if (ppc_md.machine_check_exception) recover = ppc_md.machine_check_exception(regs); - else - recover = generic_machine_check_exception(regs); + else if (cur_cpu_spec->machine_check) + recover = cur_cpu_spec->machine_check(regs); - if (recover) + if (recover > 0) return; if (user_mode(regs)) { @@ -476,7 +507,12 @@ void machine_check_exception(struct pt_regs *regs) } #if defined(CONFIG_8xx) && defined(CONFIG_PCI) - /* the qspan pci read routines can cause machine checks -- Cort */ + /* the qspan pci read routines can cause machine checks -- Cort + * + * yuck !!! that totally needs to go away ! There are better ways + * to deal with that than having a wart in the mcheck handler. + * -- BenH + */ bad_page_fault(regs, regs->dar, SIGBUS); return; #endif diff --git a/arch/powerpc/kernel/udbg.c b/arch/powerpc/kernel/udbg.c index eba148f2a31..7aad6203e41 100644 --- a/arch/powerpc/kernel/udbg.c +++ b/arch/powerpc/kernel/udbg.c @@ -54,6 +54,9 @@ void __init udbg_early_init(void) #elif defined(CONFIG_PPC_EARLY_DEBUG_44x) /* PPC44x debug */ udbg_init_44x_as1(); +#elif defined(CONFIG_PPC_EARLY_DEBUG_40x) + /* PPC40x debug */ + udbg_init_40x_realmode(); #elif defined(CONFIG_PPC_EARLY_DEBUG_CPM) udbg_init_cpm(); #endif diff --git a/arch/powerpc/kernel/udbg_16550.c b/arch/powerpc/kernel/udbg_16550.c index df740eae77b..cb01ebc5938 100644 --- a/arch/powerpc/kernel/udbg_16550.c +++ b/arch/powerpc/kernel/udbg_16550.c @@ -225,3 +225,36 @@ void __init udbg_init_44x_as1(void) udbg_getc = udbg_44x_as1_getc; } #endif /* CONFIG_PPC_EARLY_DEBUG_44x */ + +#ifdef CONFIG_PPC_EARLY_DEBUG_40x +static void udbg_40x_real_putc(char c) +{ + if (udbg_comport) { + while ((real_readb(&udbg_comport->lsr) & LSR_THRE) == 0) + /* wait for idle */; + real_writeb(c, &udbg_comport->thr); eieio(); + if (c == '\n') + udbg_40x_real_putc('\r'); + } +} + +static int udbg_40x_real_getc(void) +{ + if (udbg_comport) { + while ((real_readb(&udbg_comport->lsr) & LSR_DR) == 0) + ; /* wait for char */ + return real_readb(&udbg_comport->rbr); + } + return -1; +} + +void __init udbg_init_40x_realmode(void) +{ + udbg_comport = (struct NS16550 __iomem *) + CONFIG_PPC_EARLY_DEBUG_40x_PHYSADDR; + + udbg_putc = udbg_40x_real_putc; + udbg_getc = udbg_40x_real_getc; + udbg_getc_poll = NULL; +} +#endif /* CONFIG_PPC_EARLY_DEBUG_40x */ diff --git a/arch/powerpc/platforms/40x/Kconfig b/arch/powerpc/platforms/40x/Kconfig index 8f6699fcc14..74f31177e47 100644 --- a/arch/powerpc/platforms/40x/Kconfig +++ b/arch/powerpc/platforms/40x/Kconfig @@ -14,28 +14,34 @@ # help # This option enables support for the CPCI405 board. -#config EP405 -# bool "EP405/EP405PC" -# depends on 40x -# default n -# select 405GP -# help -# This option enables support for the EP405/EP405PC boards. - -#config EP405PC -# bool "EP405PC Support" -# depends on EP405 -# default y -# help -# This option enables support for the extra features of the EP405PC board. +config EP405 + bool "EP405/EP405PC" + depends on 40x + default n + select 405GP + select PCI + help + This option enables support for the EP405/EP405PC boards. config KILAUEA bool "Kilauea" depends on 40x default n + select 405EX + select PPC4xx_PCI_EXPRESS help This option enables support for the AMCC PPC405EX evaluation board. +config MAKALU + bool "Makalu" + depends on 40x + default n + select 405EX + select PCI + select PPC4xx_PCI_EXPRESS + help + This option enables support for the AMCC PPC405EX board. + #config REDWOOD_5 # bool "Redwood-5" # depends on 40x @@ -65,6 +71,7 @@ config WALNUT depends on 40x default y select 405GP + select PCI help This option enables support for the IBM PPC405GP evaluation board. @@ -105,6 +112,11 @@ config 405GP config 405EP bool +config 405EX + bool + select IBM_NEW_EMAC_EMAC4 + select IBM_NEW_EMAC_RGMII + config 405GPR bool diff --git a/arch/powerpc/platforms/40x/Makefile b/arch/powerpc/platforms/40x/Makefile index 51dadeee6fc..5533a5c8ce4 100644 --- a/arch/powerpc/platforms/40x/Makefile +++ b/arch/powerpc/platforms/40x/Makefile @@ -1,3 +1,5 @@ obj-$(CONFIG_KILAUEA) += kilauea.o +obj-$(CONFIG_MAKALU) += makalu.o obj-$(CONFIG_WALNUT) += walnut.o obj-$(CONFIG_XILINX_VIRTEX_GENERIC_BOARD) += virtex.o +obj-$(CONFIG_EP405) += ep405.o diff --git a/arch/powerpc/platforms/40x/ep405.c b/arch/powerpc/platforms/40x/ep405.c new file mode 100644 index 00000000000..13d1345026d --- /dev/null +++ b/arch/powerpc/platforms/40x/ep405.c @@ -0,0 +1,123 @@ +/* + * Architecture- / platform-specific boot-time initialization code for + * IBM PowerPC 4xx based boards. Adapted from original + * code by Gary Thomas, Cort Dougan <cort@fsmlabs.com>, and Dan Malek + * <dan@net4x.com>. + * + * Copyright(c) 1999-2000 Grant Erickson <grant@lcse.umn.edu> + * + * Rewritten and ported to the merged powerpc tree: + * Copyright 2007 IBM Corporation + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * + * Adapted to EP405 by Ben. Herrenschmidt <benh@kernel.crashing.org> + * + * TODO: Wire up the PCI IRQ mux and the southbridge interrupts + * + * 2002 (c) MontaVista, Software, Inc. This file is licensed under + * the terms of the GNU General Public License version 2. This program + * is licensed "as is" without any warranty of any kind, whether express + * or implied. + */ + +#include <linux/init.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/pci-bridge.h> + +static struct device_node *bcsr_node; +static void __iomem *bcsr_regs; + +/* BCSR registers */ +#define BCSR_ID 0 +#define BCSR_PCI_CTRL 1 +#define BCSR_FLASH_NV_POR_CTRL 2 +#define BCSR_FENET_UART_CTRL 3 +#define BCSR_PCI_IRQ 4 +#define BCSR_XIRQ_SELECT 5 +#define BCSR_XIRQ_ROUTING 6 +#define BCSR_XIRQ_STATUS 7 +#define BCSR_XIRQ_STATUS2 8 +#define BCSR_SW_STAT_LED_CTRL 9 +#define BCSR_GPIO_IRQ_PAR_CTRL 10 +/* there's more, can't be bothered typing them tho */ + + +static __initdata struct of_device_id ep405_of_bus[] = { + { .compatible = "ibm,plb3", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +static int __init ep405_device_probe(void) +{ + of_platform_bus_probe(NULL, ep405_of_bus, NULL); + + return 0; +} +machine_device_initcall(ep405, ep405_device_probe); + +static void __init ep405_init_bcsr(void) +{ + const u8 *irq_routing; + int i; + + /* Find the bloody thing & map it */ + bcsr_node = of_find_compatible_node(NULL, NULL, "ep405-bcsr"); + if (bcsr_node == NULL) { + printk(KERN_ERR "EP405 BCSR not found !\n"); + return; + } + bcsr_regs = of_iomap(bcsr_node, 0); + if (bcsr_regs == NULL) { + printk(KERN_ERR "EP405 BCSR failed to map !\n"); + return; + } + + /* Get the irq-routing property and apply the routing to the CPLD */ + irq_routing = of_get_property(bcsr_node, "irq-routing", NULL); + if (irq_routing == NULL) + return; + for (i = 0; i < 16; i++) { + u8 irq = irq_routing[i]; + out_8(bcsr_regs + BCSR_XIRQ_SELECT, i); + out_8(bcsr_regs + BCSR_XIRQ_ROUTING, irq); + } + in_8(bcsr_regs + BCSR_XIRQ_SELECT); + mb(); + out_8(bcsr_regs + BCSR_GPIO_IRQ_PAR_CTRL, 0xfe); +} + +static void __init ep405_setup_arch(void) +{ + /* Find & init the BCSR CPLD */ + ep405_init_bcsr(); + + ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; +} + +static int __init ep405_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "ep405")) + return 0; + + return 1; +} + +define_machine(ep405) { + .name = "EP405", + .probe = ep405_probe, + .setup_arch = ep405_setup_arch, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/40x/kilauea.c b/arch/powerpc/platforms/40x/kilauea.c index 1bffdbdd21b..f9206a7fede 100644 --- a/arch/powerpc/platforms/40x/kilauea.c +++ b/arch/powerpc/platforms/40x/kilauea.c @@ -19,8 +19,9 @@ #include <asm/udbg.h> #include <asm/time.h> #include <asm/uic.h> +#include <asm/pci-bridge.h> -static struct of_device_id kilauea_of_bus[] = { +static __initdata struct of_device_id kilauea_of_bus[] = { { .compatible = "ibm,plb4", }, { .compatible = "ibm,opb", }, { .compatible = "ibm,ebc", }, @@ -29,14 +30,11 @@ static struct of_device_id kilauea_of_bus[] = { static int __init kilauea_device_probe(void) { - if (!machine_is(kilauea)) - return 0; - of_platform_bus_probe(NULL, kilauea_of_bus, NULL); return 0; } -device_initcall(kilauea_device_probe); +machine_device_initcall(kilauea, kilauea_device_probe); static int __init kilauea_probe(void) { @@ -45,6 +43,8 @@ static int __init kilauea_probe(void) if (!of_flat_dt_is_compatible(root, "amcc,kilauea")) return 0; + ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; + return 1; } diff --git a/arch/powerpc/platforms/40x/makalu.c b/arch/powerpc/platforms/40x/makalu.c new file mode 100644 index 00000000000..4e4df72fc9c --- /dev/null +++ b/arch/powerpc/platforms/40x/makalu.c @@ -0,0 +1,58 @@ +/* + * Makalu board specific routines + * + * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * Based on the Walnut code by + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * Copyright 2007 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/init.h> +#include <linux/of_platform.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/pci-bridge.h> + +static __initdata struct of_device_id makalu_of_bus[] = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +static int __init makalu_device_probe(void) +{ + of_platform_bus_probe(NULL, makalu_of_bus, NULL); + + return 0; +} +machine_device_initcall(makalu, makalu_device_probe); + +static int __init makalu_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "amcc,makalu")) + return 0; + + ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; + + return 1; +} + +define_machine(makalu) { + .name = "Makalu", + .probe = makalu_probe, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/40x/virtex.c b/arch/powerpc/platforms/40x/virtex.c index 14bbc328170..43fcc8e9f7d 100644 --- a/arch/powerpc/platforms/40x/virtex.c +++ b/arch/powerpc/platforms/40x/virtex.c @@ -17,14 +17,11 @@ static int __init virtex_device_probe(void) { - if (!machine_is(virtex)) - return 0; - of_platform_bus_probe(NULL, NULL, NULL); return 0; } -device_initcall(virtex_device_probe); +machine_device_initcall(virtex, virtex_device_probe); static int __init virtex_probe(void) { diff --git a/arch/powerpc/platforms/40x/walnut.c b/arch/powerpc/platforms/40x/walnut.c index ff6db243179..f115b6dbf5a 100644 --- a/arch/powerpc/platforms/40x/walnut.c +++ b/arch/powerpc/platforms/40x/walnut.c @@ -24,8 +24,9 @@ #include <asm/udbg.h> #include <asm/time.h> #include <asm/uic.h> +#include <asm/pci-bridge.h> -static struct of_device_id walnut_of_bus[] = { +static __initdata struct of_device_id walnut_of_bus[] = { { .compatible = "ibm,plb3", }, { .compatible = "ibm,opb", }, { .compatible = "ibm,ebc", }, @@ -34,15 +35,11 @@ static struct of_device_id walnut_of_bus[] = { static int __init walnut_device_probe(void) { - if (!machine_is(walnut)) - return 0; - - /* FIXME: do bus probe here */ of_platform_bus_probe(NULL, walnut_of_bus, NULL); return 0; } -device_initcall(walnut_device_probe); +machine_device_initcall(walnut, walnut_device_probe); static int __init walnut_probe(void) { @@ -51,6 +48,8 @@ static int __init walnut_probe(void) if (!of_flat_dt_is_compatible(root, "ibm,walnut")) return 0; + ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; + return 1; } diff --git a/arch/powerpc/platforms/44x/Kconfig b/arch/powerpc/platforms/44x/Kconfig index 8390cc16413..d2480130534 100644 --- a/arch/powerpc/platforms/44x/Kconfig +++ b/arch/powerpc/platforms/44x/Kconfig @@ -3,6 +3,7 @@ config BAMBOO depends on 44x default n select 440EP + select PCI help This option enables support for the IBM PPC440EP evaluation board. @@ -11,6 +12,7 @@ config EBONY depends on 44x default y select 440GP + select PCI help This option enables support for the IBM PPC440GP evaluation board. @@ -22,6 +24,35 @@ config SEQUOIA help This option enables support for the AMCC PPC440EPX evaluation board. +config TAISHAN + bool "Taishan" + depends on 44x + default n + select 440GX + select PCI + help + This option enables support for the AMCC PPC440GX "Taishan" + evaluation board. + +config KATMAI + bool "Katmai" + depends on 44x + default n + select 440SPe + select PCI + select PPC4xx_PCI_EXPRESS + help + This option enables support for the AMCC PPC440SPe evaluation board. + +config RAINIER + bool "Rainier" + depends on 44x + default n + select 440GRX + select PCI + help + This option enables support for the AMCC PPC440GRX evaluation board. + #config LUAN # bool "Luan" # depends on 44x @@ -52,20 +83,29 @@ config 440EPX select IBM_NEW_EMAC_RGMII select IBM_NEW_EMAC_ZMII +config 440GRX + bool + select IBM_NEW_EMAC_EMAC4 + select IBM_NEW_EMAC_RGMII + select IBM_NEW_EMAC_ZMII + config 440GP bool select IBM_NEW_EMAC_ZMII config 440GX bool + select IBM_NEW_EMAC_EMAC4 + select IBM_NEW_EMAC_RGMII + select IBM_NEW_EMAC_ZMII #test only + select IBM_NEW_EMAC_TAH #test only config 440SP bool -config 440A +config 440SPe + select IBM_NEW_EMAC_EMAC4 bool - depends on 440GX || 440EPX - default y # 44x errata/workaround config symbols, selected by the CPU models above config IBM440EP_ERR42 diff --git a/arch/powerpc/platforms/44x/Makefile b/arch/powerpc/platforms/44x/Makefile index 10ce6740cc7..a2a0dc13e9e 100644 --- a/arch/powerpc/platforms/44x/Makefile +++ b/arch/powerpc/platforms/44x/Makefile @@ -1,4 +1,7 @@ obj-$(CONFIG_44x) := misc_44x.o obj-$(CONFIG_EBONY) += ebony.o -obj-$(CONFIG_BAMBOO) += bamboo.o +obj-$(CONFIG_TAISHAN) += taishan.o +obj-$(CONFIG_BAMBOO) += bamboo.o obj-$(CONFIG_SEQUOIA) += sequoia.o +obj-$(CONFIG_KATMAI) += katmai.o +obj-$(CONFIG_RAINIER) += rainier.o diff --git a/arch/powerpc/platforms/44x/bamboo.c b/arch/powerpc/platforms/44x/bamboo.c index be23f112184..fb9a22a7e8d 100644 --- a/arch/powerpc/platforms/44x/bamboo.c +++ b/arch/powerpc/platforms/44x/bamboo.c @@ -21,9 +21,11 @@ #include <asm/udbg.h> #include <asm/time.h> #include <asm/uic.h> +#include <asm/pci-bridge.h> + #include "44x.h" -static struct of_device_id bamboo_of_bus[] = { +static __initdata struct of_device_id bamboo_of_bus[] = { { .compatible = "ibm,plb4", }, { .compatible = "ibm,opb", }, { .compatible = "ibm,ebc", }, @@ -32,14 +34,11 @@ static struct of_device_id bamboo_of_bus[] = { static int __init bamboo_device_probe(void) { - if (!machine_is(bamboo)) - return 0; - of_platform_bus_probe(NULL, bamboo_of_bus, NULL); return 0; } -device_initcall(bamboo_device_probe); +machine_device_initcall(bamboo, bamboo_device_probe); static int __init bamboo_probe(void) { @@ -48,6 +47,8 @@ static int __init bamboo_probe(void) if (!of_flat_dt_is_compatible(root, "amcc,bamboo")) return 0; + ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; + return 1; } diff --git a/arch/powerpc/platforms/44x/ebony.c b/arch/powerpc/platforms/44x/ebony.c index 6cd3476767c..481a016e153 100644 --- a/arch/powerpc/platforms/44x/ebony.c +++ b/arch/powerpc/platforms/44x/ebony.c @@ -24,10 +24,11 @@ #include <asm/udbg.h> #include <asm/time.h> #include <asm/uic.h> +#include <asm/pci-bridge.h> #include "44x.h" -static struct of_device_id ebony_of_bus[] = { +static __initdata struct of_device_id ebony_of_bus[] = { { .compatible = "ibm,plb4", }, { .compatible = "ibm,opb", }, { .compatible = "ibm,ebc", }, @@ -36,14 +37,11 @@ static struct of_device_id ebony_of_bus[] = { static int __init ebony_device_probe(void) { - if (!machine_is(ebony)) - return 0; - of_platform_bus_probe(NULL, ebony_of_bus, NULL); return 0; } -device_initcall(ebony_device_probe); +machine_device_initcall(ebony, ebony_device_probe); /* * Called very early, MMU is off, device-tree isn't unflattened @@ -55,6 +53,8 @@ static int __init ebony_probe(void) if (!of_flat_dt_is_compatible(root, "ibm,ebony")) return 0; + ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; + return 1; } diff --git a/arch/powerpc/platforms/44x/katmai.c b/arch/powerpc/platforms/44x/katmai.c new file mode 100644 index 00000000000..11134121f27 --- /dev/null +++ b/arch/powerpc/platforms/44x/katmai.c @@ -0,0 +1,63 @@ +/* + * Katmai board specific routines + * + * Benjamin Herrenschmidt <benh@kernel.crashing.org> + * Copyright 2007 IBM Corp. + * + * Based on the Bamboo code by + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * Copyright 2007 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/init.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/pci-bridge.h> + +#include "44x.h" + +static __initdata struct of_device_id katmai_of_bus[] = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +static int __init katmai_device_probe(void) +{ + of_platform_bus_probe(NULL, katmai_of_bus, NULL); + + return 0; +} +machine_device_initcall(katmai, katmai_device_probe); + +static int __init katmai_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "amcc,katmai")) + return 0; + + ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; + + return 1; +} + +define_machine(katmai) { + .name = "Katmai", + .probe = katmai_probe, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc44x_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/44x/rainier.c b/arch/powerpc/platforms/44x/rainier.c new file mode 100644 index 00000000000..a4ce5ba8fe3 --- /dev/null +++ b/arch/powerpc/platforms/44x/rainier.c @@ -0,0 +1,61 @@ +/* + * Rainier board specific routines + * + * Valentine Barshak <vbarshak@ru.mvista.com> + * Copyright 2007 MontaVista Software Inc. + * + * Based on the Bamboo code by + * Josh Boyer <jwboyer@linux.vnet.ibm.com> + * Copyright 2007 IBM Corporation + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ +#include <linux/init.h> +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/of_platform.h> +#include <asm/pci-bridge.h> +#include "44x.h" + +static __initdata struct of_device_id rainier_of_bus[] = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +static int __init rainier_device_probe(void) +{ + of_platform_bus_probe(NULL, rainier_of_bus, NULL); + + return 0; +} +machine_device_initcall(rainier, rainier_device_probe); + +static int __init rainier_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "amcc,rainier")) + return 0; + + ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; + + return 1; +} + +define_machine(rainier) { + .name = "Rainier", + .probe = rainier_probe, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc44x_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/44x/sequoia.c b/arch/powerpc/platforms/44x/sequoia.c index 21a9dd14f29..374f8c7fcd0 100644 --- a/arch/powerpc/platforms/44x/sequoia.c +++ b/arch/powerpc/platforms/44x/sequoia.c @@ -21,9 +21,11 @@ #include <asm/udbg.h> #include <asm/time.h> #include <asm/uic.h> +#include <asm/pci-bridge.h> + #include "44x.h" -static struct of_device_id sequoia_of_bus[] = { +static __initdata struct of_device_id sequoia_of_bus[] = { { .compatible = "ibm,plb4", }, { .compatible = "ibm,opb", }, { .compatible = "ibm,ebc", }, @@ -32,14 +34,11 @@ static struct of_device_id sequoia_of_bus[] = { static int __init sequoia_device_probe(void) { - if (!machine_is(sequoia)) - return 0; - of_platform_bus_probe(NULL, sequoia_of_bus, NULL); return 0; } -device_initcall(sequoia_device_probe); +machien_device_initcall(sequoia, sequoia_device_probe); static int __init sequoia_probe(void) { @@ -48,6 +47,8 @@ static int __init sequoia_probe(void) if (!of_flat_dt_is_compatible(root, "amcc,sequoia")) return 0; + ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; + return 1; } diff --git a/arch/powerpc/platforms/44x/taishan.c b/arch/powerpc/platforms/44x/taishan.c new file mode 100644 index 00000000000..28ab7e2e02c --- /dev/null +++ b/arch/powerpc/platforms/44x/taishan.c @@ -0,0 +1,73 @@ +/* + * Taishan board specific routines based off ebony.c code + * original copyrights below + * + * Matt Porter <mporter@kernel.crashing.org> + * Copyright 2002-2005 MontaVista Software Inc. + * + * Eugene Surovegin <eugene.surovegin@zultys.com> or <ebs@ebshome.net> + * Copyright (c) 2003-2005 Zultys Technologies + * + * Rewritten and ported to the merged powerpc tree: + * Copyright 2007 David Gibson <dwg@au1.ibm.com>, IBM Corporation. + * + * Modified from ebony.c for taishan: + * Copyright 2007 Hugh Blemings <hugh@au.ibm.com>, IBM Corporation. + * + * This program is free software; you can redistribute it and/or modify it + * under the terms of the GNU General Public License as published by the + * Free Software Foundation; either version 2 of the License, or (at your + * option) any later version. + */ + +#include <linux/init.h> +#include <linux/of_platform.h> + +#include <asm/machdep.h> +#include <asm/prom.h> +#include <asm/udbg.h> +#include <asm/time.h> +#include <asm/uic.h> +#include <asm/pci-bridge.h> + +#include "44x.h" + +static __initdata struct of_device_id taishan_of_bus[] = { + { .compatible = "ibm,plb4", }, + { .compatible = "ibm,opb", }, + { .compatible = "ibm,ebc", }, + {}, +}; + +static int __init taishan_device_probe(void) +{ + of_platform_bus_probe(NULL, taishan_of_bus, NULL); + + return 0; +} +machine_device_initcall(taishan, taishan_device_probe); + +/* + * Called very early, MMU is off, device-tree isn't unflattened + */ +static int __init taishan_probe(void) +{ + unsigned long root = of_get_flat_dt_root(); + + if (!of_flat_dt_is_compatible(root, "amcc,taishan")) + return 0; + + ppc_pci_flags = PPC_PCI_REASSIGN_ALL_RSRC; + + return 1; +} + +define_machine(taishan) { + .name = "Taishan", + .probe = taishan_probe, + .progress = udbg_progress, + .init_IRQ = uic_init_tree, + .get_irq = uic_get_irq, + .restart = ppc44x_reset_system, + .calibrate_decr = generic_calibrate_decr, +}; diff --git a/arch/powerpc/platforms/83xx/mpc837x_mds.c b/arch/powerpc/platforms/83xx/mpc837x_mds.c index 166c1116b1a..9cdc32b4fa1 100644 --- a/arch/powerpc/platforms/83xx/mpc837x_mds.c +++ b/arch/powerpc/platforms/83xx/mpc837x_mds.c @@ -22,11 +22,6 @@ #include "mpc83xx.h" -#ifndef CONFIG_PCI -unsigned long isa_io_base = 0; -unsigned long isa_mem_base = 0; -#endif - /* ************************************************************************ * * Setup the architecture diff --git a/arch/powerpc/platforms/Kconfig.cputype b/arch/powerpc/platforms/Kconfig.cputype index 99684ea606a..c3ee0b58d53 100644 --- a/arch/powerpc/platforms/Kconfig.cputype +++ b/arch/powerpc/platforms/Kconfig.cputype @@ -43,6 +43,7 @@ config 40x bool "AMCC 40x" select PPC_DCR_NATIVE select WANT_DEVICE_TREE + select PPC_UDBG_16550 config 44x bool "AMCC 44x" diff --git a/arch/powerpc/sysdev/Kconfig b/arch/powerpc/sysdev/Kconfig new file mode 100644 index 00000000000..72fb35b9ebc --- /dev/null +++ b/arch/powerpc/sysdev/Kconfig @@ -0,0 +1,8 @@ +# For a description of the syntax of this configuration file, +# see Documentation/kbuild/kconfig-language.txt. +# + +config PPC4xx_PCI_EXPRESS + bool + depends on PCI && 4xx + default n diff --git a/arch/powerpc/sysdev/Makefile b/arch/powerpc/sysdev/Makefile index 85cf8c60f0b..9a20ef4f0ea 100644 --- a/arch/powerpc/sysdev/Makefile +++ b/arch/powerpc/sysdev/Makefile @@ -27,6 +27,9 @@ obj-$(CONFIG_PPC_I8259) += i8259.o obj-$(CONFIG_PPC_83xx) += ipic.o obj-$(CONFIG_4xx) += uic.o obj-$(CONFIG_XILINX_VIRTEX) += xilinx_intc.o +ifeq ($(CONFIG_PCI),y) +obj-$(CONFIG_4xx) += ppc4xx_pci.o +endif endif # Temporary hack until we have migrated to asm-powerpc diff --git a/arch/powerpc/sysdev/ppc4xx_pci.c b/arch/powerpc/sysdev/ppc4xx_pci.c new file mode 100644 index 00000000000..3c2c14c32e7 --- /dev/null +++ b/arch/powerpc/sysdev/ppc4xx_pci.c @@ -0,0 +1,1528 @@ +/* + * PCI / PCI-X / PCI-Express support for 4xx parts + * + * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp. + * + * Most PCI Express code is coming from Stefan Roese implementation for + * arch/ppc in the Denx tree, slightly reworked by me. + * + * Copyright 2007 DENX Software Engineering, Stefan Roese <sr@denx.de> + * + * Some of that comes itself from a previous implementation for 440SPE only + * by Roland Dreier: + * + * Copyright (c) 2005 Cisco Systems. All rights reserved. + * Roland Dreier <rolandd@cisco.com> + * + */ + +#undef DEBUG + +#include <linux/kernel.h> +#include <linux/pci.h> +#include <linux/init.h> +#include <linux/of.h> +#include <linux/bootmem.h> +#include <linux/delay.h> + +#include <asm/io.h> +#include <asm/pci-bridge.h> +#include <asm/machdep.h> +#include <asm/dcr.h> +#include <asm/dcr-regs.h> + +#include "ppc4xx_pci.h" + +static int dma_offset_set; + +/* Move that to a useable header */ +extern unsigned long total_memory; + +#define U64_TO_U32_LOW(val) ((u32)((val) & 0x00000000ffffffffULL)) +#define U64_TO_U32_HIGH(val) ((u32)((val) >> 32)) + +#ifdef CONFIG_RESOURCES_64BIT +#define RES_TO_U32_LOW(val) U64_TO_U32_LOW(val) +#define RES_TO_U32_HIGH(val) U64_TO_U32_HIGH(val) +#else +#define RES_TO_U32_LOW(val) (val) +#define RES_TO_U32_HIGH(val) (0) +#endif + +static inline int ppc440spe_revA(void) +{ + /* Catch both 440SPe variants, with and without RAID6 support */ + if ((mfspr(SPRN_PVR) & 0xffefffff) == 0x53421890) + return 1; + else + return 0; +} + +static void fixup_ppc4xx_pci_bridge(struct pci_dev *dev) +{ + struct pci_controller *hose; + int i; + + if (dev->devfn != 0 || dev->bus->self != NULL) + return; + + hose = pci_bus_to_host(dev->bus); + if (hose == NULL) + return; + + if (!of_device_is_compatible(hose->dn, "ibm,plb-pciex") && + !of_device_is_compatible(hose->dn, "ibm,plb-pcix") && + !of_device_is_compatible(hose->dn, "ibm,plb-pci")) + return; + + /* Hide the PCI host BARs from the kernel as their content doesn't + * fit well in the resource management + */ + for (i = 0; i < DEVICE_COUNT_RESOURCE; i++) { + dev->resource[i].start = dev->resource[i].end = 0; + dev->resource[i].flags = 0; + } + + printk(KERN_INFO "PCI: Hiding 4xx host bridge resources %s\n", + pci_name(dev)); +} +DECLARE_PCI_FIXUP_HEADER(PCI_ANY_ID, PCI_ANY_ID, fixup_ppc4xx_pci_bridge); + +static int __init ppc4xx_parse_dma_ranges(struct pci_controller *hose, + void __iomem *reg, + struct resource *res) +{ + u64 size; + const u32 *ranges; + int rlen; + int pna = of_n_addr_cells(hose->dn); + int np = pna + 5; + + /* Default */ + res->start = 0; + res->end = size = 0x80000000; + res->flags = IORESOURCE_MEM | IORESOURCE_PREFETCH; + + /* Get dma-ranges property */ + ranges = of_get_property(hose->dn, "dma-ranges", &rlen); + if (ranges == NULL) + goto out; + + /* Walk it */ + while ((rlen -= np * 4) >= 0) { + u32 pci_space = ranges[0]; + u64 pci_addr = of_read_number(ranges + 1, 2); + u64 cpu_addr = of_translate_dma_address(hose->dn, ranges + 3); + size = of_read_number(ranges + pna + 3, 2); + ranges += np; + if (cpu_addr == OF_BAD_ADDR || size == 0) + continue; + + /* We only care about memory */ + if ((pci_space & 0x03000000) != 0x02000000) + continue; + + /* We currently only support memory at 0, and pci_addr + * within 32 bits space + */ + if (cpu_addr != 0 || pci_addr > 0xffffffff) { + printk(KERN_WARNING "%s: Ignored unsupported dma range" + " 0x%016llx...0x%016llx -> 0x%016llx\n", + hose->dn->full_name, + pci_addr, pci_addr + size - 1, cpu_addr); + continue; + } + + /* Check if not prefetchable */ + if (!(pci_space & 0x40000000)) + res->flags &= ~IORESOURCE_PREFETCH; + + + /* Use that */ + res->start = pci_addr; +#ifndef CONFIG_RESOURCES_64BIT + /* Beware of 32 bits resources */ + if ((pci_addr + size) > 0x100000000ull) + res->end = 0xffffffff; + else +#endif + res->end = res->start + size - 1; + break; + } + + /* We only support one global DMA offset */ + if (dma_offset_set && pci_dram_offset != res->start) { + printk(KERN_ERR "%s: dma-ranges(s) mismatch\n", + hose->dn->full_name); + return -ENXIO; + } + + /* Check that we can fit all of memory as we don't support + * DMA bounce buffers + */ + if (size < total_memory) { + printk(KERN_ERR "%s: dma-ranges too small " + "(size=%llx total_memory=%lx)\n", + hose->dn->full_name, size, total_memory); + return -ENXIO; + } + + /* Check we are a power of 2 size and that base is a multiple of size*/ + if (!is_power_of_2(size) || + (res->start & (size - 1)) != 0) { + printk(KERN_ERR "%s: dma-ranges unaligned\n", + hose->dn->full_name); + return -ENXIO; + } + + /* Check that we are fully contained within 32 bits space */ + if (res->end > 0xffffffff) { + printk(KERN_ERR "%s: dma-ranges outside of 32 bits space\n", + hose->dn->full_name); + return -ENXIO; + } + out: + dma_offset_set = 1; + pci_dram_offset = res->start; + + printk(KERN_INFO "4xx PCI DMA offset set to 0x%08lx\n", + pci_dram_offset); + return 0; +} + +/* + * 4xx PCI 2.x part + */ + +static void __init ppc4xx_configure_pci_PMMs(struct pci_controller *hose, + void __iomem *reg) +{ + u32 la, ma, pcila, pciha; + int i, j; + + /* Setup outbound memory windows */ + for (i = j = 0; i < 3; i++) { + struct resource *res = &hose->mem_resources[i]; + + /* we only care about memory windows */ + if (!(res->flags & IORESOURCE_MEM)) + continue; + if (j > 2) { + printk(KERN_WARNING "%s: Too many ranges\n", + hose->dn->full_name); + break; + } + + /* Calculate register values */ + la = res->start; + pciha = RES_TO_U32_HIGH(res->start - hose->pci_mem_offset); + pcila = RES_TO_U32_LOW(res->start - hose->pci_mem_offset); + + ma = res->end + 1 - res->start; + if (!is_power_of_2(ma) || ma < 0x1000 || ma > 0xffffffffu) { + printk(KERN_WARNING "%s: Resource out of range\n", + hose->dn->full_name); + continue; + } + ma = (0xffffffffu << ilog2(ma)) | 0x1; + if (res->flags & IORESOURCE_PREFETCH) + ma |= 0x2; + + /* Program register values */ + writel(la, reg + PCIL0_PMM0LA + (0x10 * j)); + writel(pcila, reg + PCIL0_PMM0PCILA + (0x10 * j)); + writel(pciha, reg + PCIL0_PMM0PCIHA + (0x10 * j)); + writel(ma, reg + PCIL0_PMM0MA + (0x10 * j)); + j++; + } +} + +static void __init ppc4xx_configure_pci_PTMs(struct pci_controller *hose, + void __iomem *reg, + const struct resource *res) +{ + resource_size_t size = res->end - res->start + 1; + u32 sa; + + /* Calculate window size */ + sa = (0xffffffffu << ilog2(size)) | 1; + sa |= 0x1; + + /* RAM is always at 0 local for now */ + writel(0, reg + PCIL0_PTM1LA); + writel(sa, reg + PCIL0_PTM1MS); + + /* Map on PCI side */ + early_write_config_dword(hose, hose->first_busno, 0, + PCI_BASE_ADDRESS_1, res->start); + early_write_config_dword(hose, hose->first_busno, 0, + PCI_BASE_ADDRESS_2, 0x00000000); + early_write_config_word(hose, hose->first_busno, 0, + PCI_COMMAND, 0x0006); +} + +static void __init ppc4xx_probe_pci_bridge(struct device_node *np) +{ + /* NYI */ + struct resource rsrc_cfg; + struct resource rsrc_reg; + struct resource dma_window; + struct pci_controller *hose = NULL; + void __iomem *reg = NULL; + const int *bus_range; + int primary = 0; + + /* Fetch config space registers address */ + if (of_address_to_resource(np, 0, &rsrc_cfg)) { + printk(KERN_ERR "%s:Can't get PCI config register base !", + np->full_name); + return; + } + /* Fetch host bridge internal registers address */ + if (of_address_to_resource(np, 3, &rsrc_reg)) { + printk(KERN_ERR "%s: Can't get PCI internal register base !", + np->full_name); + return; + } + + /* Check if primary bridge */ + if (of_get_property(np, "primary", NULL)) + primary = 1; + + /* Get bus range if any */ + bus_range = of_get_property(np, "bus-range", NULL); + + /* Map registers */ + reg = ioremap(rsrc_reg.start, rsrc_reg.end + 1 - rsrc_reg.start); + if (reg == NULL) { + printk(KERN_ERR "%s: Can't map registers !", np->full_name); + goto fail; + } + + /* Allocate the host controller data structure */ + hose = pcibios_alloc_controller(np); + if (!hose) + goto fail; + + hose->first_busno = bus_range ? bus_range[0] : 0x0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + /* Setup config space */ + setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4, 0); + + /* Disable all windows */ + writel(0, reg + PCIL0_PMM0MA); + writel(0, reg + PCIL0_PMM1MA); + writel(0, reg + PCIL0_PMM2MA); + writel(0, reg + PCIL0_PTM1MS); + writel(0, reg + PCIL0_PTM2MS); + + /* Parse outbound mapping resources */ + pci_process_bridge_OF_ranges(hose, np, primary); + + /* Parse inbound mapping resources */ + if (ppc4xx_parse_dma_ranges(hose, reg, &dma_window) != 0) + goto fail; + + /* Configure outbound ranges POMs */ + ppc4xx_configure_pci_PMMs(hose, reg); + + /* Configure inbound ranges PIMs */ + ppc4xx_configure_pci_PTMs(hose, reg, &dma_window); + + /* We don't need the registers anymore */ + iounmap(reg); + return; + + fail: + if (hose) + pcibios_free_controller(hose); + if (reg) + iounmap(reg); +} + +/* + * 4xx PCI-X part + */ + +static void __init ppc4xx_configure_pcix_POMs(struct pci_controller *hose, + void __iomem *reg) +{ + u32 lah, lal, pciah, pcial, sa; + int i, j; + + /* Setup outbound memory windows */ + for (i = j = 0; i < 3; i++) { + struct resource *res = &hose->mem_resources[i]; + + /* we only care about memory windows */ + if (!(res->flags & IORESOURCE_MEM)) + continue; + if (j > 1) { + printk(KERN_WARNING "%s: Too many ranges\n", + hose->dn->full_name); + break; + } + + /* Calculate register values */ + lah = RES_TO_U32_HIGH(res->start); + lal = RES_TO_U32_LOW(res->start); + pciah = RES_TO_U32_HIGH(res->start - hose->pci_mem_offset); + pcial = RES_TO_U32_LOW(res->start - hose->pci_mem_offset); + sa = res->end + 1 - res->start; + if (!is_power_of_2(sa) || sa < 0x100000 || + sa > 0xffffffffu) { + printk(KERN_WARNING "%s: Resource out of range\n", + hose->dn->full_name); + continue; + } + sa = (0xffffffffu << ilog2(sa)) | 0x1; + + /* Program register values */ + if (j == 0) { + writel(lah, reg + PCIX0_POM0LAH); + writel(lal, reg + PCIX0_POM0LAL); + writel(pciah, reg + PCIX0_POM0PCIAH); + writel(pcial, reg + PCIX0_POM0PCIAL); + writel(sa, reg + PCIX0_POM0SA); + } else { + writel(lah, reg + PCIX0_POM1LAH); + writel(lal, reg + PCIX0_POM1LAL); + writel(pciah, reg + PCIX0_POM1PCIAH); + writel(pcial, reg + PCIX0_POM1PCIAL); + writel(sa, reg + PCIX0_POM1SA); + } + j++; + } +} + +static void __init ppc4xx_configure_pcix_PIMs(struct pci_controller *hose, + void __iomem *reg, + const struct resource *res, + int big_pim, + int enable_msi_hole) +{ + resource_size_t size = res->end - res->start + 1; + u32 sa; + + /* RAM is always at 0 */ + writel(0x00000000, reg + PCIX0_PIM0LAH); + writel(0x00000000, reg + PCIX0_PIM0LAL); + + /* Calculate window size */ + sa = (0xffffffffu << ilog2(size)) | 1; + sa |= 0x1; + if (res->flags & IORESOURCE_PREFETCH) + sa |= 0x2; + if (enable_msi_hole) + sa |= 0x4; + writel(sa, reg + PCIX0_PIM0SA); + if (big_pim) + writel(0xffffffff, reg + PCIX0_PIM0SAH); + + /* Map on PCI side */ + writel(0x00000000, reg + PCIX0_BAR0H); + writel(res->start, reg + PCIX0_BAR0L); + writew(0x0006, reg + PCIX0_COMMAND); +} + +static void __init ppc4xx_probe_pcix_bridge(struct device_node *np) +{ + struct resource rsrc_cfg; + struct resource rsrc_reg; + struct resource dma_window; + struct pci_controller *hose = NULL; + void __iomem *reg = NULL; + const int *bus_range; + int big_pim = 0, msi = 0, primary = 0; + + /* Fetch config space registers address */ + if (of_address_to_resource(np, 0, &rsrc_cfg)) { + printk(KERN_ERR "%s:Can't get PCI-X config register base !", + np->full_name); + return; + } + /* Fetch host bridge internal registers address */ + if (of_address_to_resource(np, 3, &rsrc_reg)) { + printk(KERN_ERR "%s: Can't get PCI-X internal register base !", + np->full_name); + return; + } + + /* Check if it supports large PIMs (440GX) */ + if (of_get_property(np, "large-inbound-windows", NULL)) + big_pim = 1; + + /* Check if we should enable MSIs inbound hole */ + if (of_get_property(np, "enable-msi-hole", NULL)) + msi = 1; + + /* Check if primary bridge */ + if (of_get_property(np, "primary", NULL)) + primary = 1; + + /* Get bus range if any */ + bus_range = of_get_property(np, "bus-range", NULL); + + /* Map registers */ + reg = ioremap(rsrc_reg.start, rsrc_reg.end + 1 - rsrc_reg.start); + if (reg == NULL) { + printk(KERN_ERR "%s: Can't map registers !", np->full_name); + goto fail; + } + + /* Allocate the host controller data structure */ + hose = pcibios_alloc_controller(np); + if (!hose) + goto fail; + + hose->first_busno = bus_range ? bus_range[0] : 0x0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + /* Setup config space */ + setup_indirect_pci(hose, rsrc_cfg.start, rsrc_cfg.start + 0x4, 0); + + /* Disable all windows */ + writel(0, reg + PCIX0_POM0SA); + writel(0, reg + PCIX0_POM1SA); + writel(0, reg + PCIX0_POM2SA); + writel(0, reg + PCIX0_PIM0SA); + writel(0, reg + PCIX0_PIM1SA); + writel(0, reg + PCIX0_PIM2SA); + if (big_pim) { + writel(0, reg + PCIX0_PIM0SAH); + writel(0, reg + PCIX0_PIM2SAH); + } + + /* Parse outbound mapping resources */ + pci_process_bridge_OF_ranges(hose, np, primary); + + /* Parse inbound mapping resources */ + if (ppc4xx_parse_dma_ranges(hose, reg, &dma_window) != 0) + goto fail; + + /* Configure outbound ranges POMs */ + ppc4xx_configure_pcix_POMs(hose, reg); + + /* Configure inbound ranges PIMs */ + ppc4xx_configure_pcix_PIMs(hose, reg, &dma_window, big_pim, msi); + + /* We don't need the registers anymore */ + iounmap(reg); + return; + + fail: + if (hose) + pcibios_free_controller(hose); + if (reg) + iounmap(reg); +} + +#ifdef CONFIG_PPC4xx_PCI_EXPRESS + +/* + * 4xx PCI-Express part + * + * We support 3 parts currently based on the compatible property: + * + * ibm,plb-pciex-440spe + * ibm,plb-pciex-405ex + * + * Anything else will be rejected for now as they are all subtly + * different unfortunately. + * + */ + +#define MAX_PCIE_BUS_MAPPED 0x10 + +struct ppc4xx_pciex_port +{ + struct pci_controller *hose; + struct device_node *node; + unsigned int index; + int endpoint; + int link; + int has_ibpre; + unsigned int sdr_base; + dcr_host_t dcrs; + struct resource cfg_space; + struct resource utl_regs; + void __iomem *utl_base; +}; + +static struct ppc4xx_pciex_port *ppc4xx_pciex_ports; +static unsigned int ppc4xx_pciex_port_count; + +struct ppc4xx_pciex_hwops +{ + int (*core_init)(struct device_node *np); + int (*port_init_hw)(struct ppc4xx_pciex_port *port); + int (*setup_utl)(struct ppc4xx_pciex_port *port); +}; + +static struct ppc4xx_pciex_hwops *ppc4xx_pciex_hwops; + +#ifdef CONFIG_44x + +/* Check various reset bits of the 440SPe PCIe core */ +static int __init ppc440spe_pciex_check_reset(struct device_node *np) +{ + u32 valPE0, valPE1, valPE2; + int err = 0; + + /* SDR0_PEGPLLLCT1 reset */ + if (!(mfdcri(SDR0, PESDR0_PLLLCT1) & 0x01000000)) { + /* + * the PCIe core was probably already initialised + * by firmware - let's re-reset RCSSET regs + * + * -- Shouldn't we also re-reset the whole thing ? -- BenH + */ + pr_debug("PCIE: SDR0_PLLLCT1 already reset.\n"); + mtdcri(SDR0, PESDR0_440SPE_RCSSET, 0x01010000); + mtdcri(SDR0, PESDR1_440SPE_RCSSET, 0x01010000); + mtdcri(SDR0, PESDR2_440SPE_RCSSET, 0x01010000); + } + + valPE0 = mfdcri(SDR0, PESDR0_440SPE_RCSSET); + valPE1 = mfdcri(SDR0, PESDR1_440SPE_RCSSET); + valPE2 = mfdcri(SDR0, PESDR2_440SPE_RCSSET); + + /* SDR0_PExRCSSET rstgu */ + if (!(valPE0 & 0x01000000) || + !(valPE1 & 0x01000000) || + !(valPE2 & 0x01000000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstgu error\n"); + err = -1; + } + + /* SDR0_PExRCSSET rstdl */ + if (!(valPE0 & 0x00010000) || + !(valPE1 & 0x00010000) || + !(valPE2 & 0x00010000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstdl error\n"); + err = -1; + } + + /* SDR0_PExRCSSET rstpyn */ + if ((valPE0 & 0x00001000) || + (valPE1 & 0x00001000) || + (valPE2 & 0x00001000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rstpyn error\n"); + err = -1; + } + + /* SDR0_PExRCSSET hldplb */ + if ((valPE0 & 0x10000000) || + (valPE1 & 0x10000000) || + (valPE2 & 0x10000000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET hldplb error\n"); + err = -1; + } + + /* SDR0_PExRCSSET rdy */ + if ((valPE0 & 0x00100000) || + (valPE1 & 0x00100000) || + (valPE2 & 0x00100000)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET rdy error\n"); + err = -1; + } + + /* SDR0_PExRCSSET shutdown */ + if ((valPE0 & 0x00000100) || + (valPE1 & 0x00000100) || + (valPE2 & 0x00000100)) { + printk(KERN_INFO "PCIE: SDR0_PExRCSSET shutdown error\n"); + err = -1; + } + + return err; +} + +/* Global PCIe core initializations for 440SPe core */ +static int __init ppc440spe_pciex_core_init(struct device_node *np) +{ + int time_out = 20; + + /* Set PLL clock receiver to LVPECL */ + mtdcri(SDR0, PESDR0_PLLLCT1, mfdcri(SDR0, PESDR0_PLLLCT1) | 1 << 28); + + /* Shouldn't we do all the calibration stuff etc... here ? */ + if (ppc440spe_pciex_check_reset(np)) + return -ENXIO; + + if (!(mfdcri(SDR0, PESDR0_PLLLCT2) & 0x10000)) { + printk(KERN_INFO "PCIE: PESDR_PLLCT2 resistance calibration " + "failed (0x%08x)\n", + mfdcri(SDR0, PESDR0_PLLLCT2)); + return -1; + } + + /* De-assert reset of PCIe PLL, wait for lock */ + mtdcri(SDR0, PESDR0_PLLLCT1, + mfdcri(SDR0, PESDR0_PLLLCT1) & ~(1 << 24)); + udelay(3); + + while (time_out) { + if (!(mfdcri(SDR0, PESDR0_PLLLCT3) & 0x10000000)) { + time_out--; + udelay(1); + } else + break; + } + if (!time_out) { + printk(KERN_INFO "PCIE: VCO output not locked\n"); + return -1; + } + + pr_debug("PCIE initialization OK\n"); + + return 3; +} + +static int ppc440spe_pciex_init_port_hw(struct ppc4xx_pciex_port *port) +{ + u32 val = 1 << 24; + + if (port->endpoint) + val = PTYPE_LEGACY_ENDPOINT << 20; + else + val = PTYPE_ROOT_PORT << 20; + + if (port->index == 0) + val |= LNKW_X8 << 12; + else + val |= LNKW_X4 << 12; + + mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, val); + mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x20222222); + if (ppc440spe_revA()) + mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x11000000); + mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL0SET1, 0x35000000); + mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL1SET1, 0x35000000); + mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL2SET1, 0x35000000); + mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL3SET1, 0x35000000); + if (port->index == 0) { + mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL4SET1, + 0x35000000); + mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL5SET1, + 0x35000000); + mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL6SET1, + 0x35000000); + mtdcri(SDR0, port->sdr_base + PESDRn_440SPE_HSSL7SET1, + 0x35000000); + } + val = mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET); + mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, + (val & ~(1 << 24 | 1 << 16)) | 1 << 12); + + return 0; +} + +static int ppc440speA_pciex_init_port_hw(struct ppc4xx_pciex_port *port) +{ + return ppc440spe_pciex_init_port_hw(port); +} + +static int ppc440speB_pciex_init_port_hw(struct ppc4xx_pciex_port *port) +{ + int rc = ppc440spe_pciex_init_port_hw(port); + + port->has_ibpre = 1; + + return rc; +} + +static int ppc440speA_pciex_init_utl(struct ppc4xx_pciex_port *port) +{ + /* XXX Check what that value means... I hate magic */ + dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x68782800); + + /* + * Set buffer allocations and then assert VRB and TXE. + */ + out_be32(port->utl_base + PEUTL_OUTTR, 0x08000000); + out_be32(port->utl_base + PEUTL_INTR, 0x02000000); + out_be32(port->utl_base + PEUTL_OPDBSZ, 0x10000000); + out_be32(port->utl_base + PEUTL_PBBSZ, 0x53000000); + out_be32(port->utl_base + PEUTL_IPHBSZ, 0x08000000); + out_be32(port->utl_base + PEUTL_IPDBSZ, 0x10000000); + out_be32(port->utl_base + PEUTL_RCIRQEN, 0x00f00000); + out_be32(port->utl_base + PEUTL_PCTL, 0x80800066); + + return 0; +} + +static int ppc440speB_pciex_init_utl(struct ppc4xx_pciex_port *port) +{ + /* Report CRS to the operating system */ + out_be32(port->utl_base + PEUTL_PBCTL, 0x08000000); + + return 0; +} + +static struct ppc4xx_pciex_hwops ppc440speA_pcie_hwops __initdata = +{ + .core_init = ppc440spe_pciex_core_init, + .port_init_hw = ppc440speA_pciex_init_port_hw, + .setup_utl = ppc440speA_pciex_init_utl, +}; + +static struct ppc4xx_pciex_hwops ppc440speB_pcie_hwops __initdata = +{ + .core_init = ppc440spe_pciex_core_init, + .port_init_hw = ppc440speB_pciex_init_port_hw, + .setup_utl = ppc440speB_pciex_init_utl, +}; + +#endif /* CONFIG_44x */ + +#ifdef CONFIG_40x + +static int __init ppc405ex_pciex_core_init(struct device_node *np) +{ + /* Nothing to do, return 2 ports */ + return 2; +} + +static void ppc405ex_pcie_phy_reset(struct ppc4xx_pciex_port *port) +{ + /* Assert the PE0_PHY reset */ + mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01010000); + msleep(1); + + /* deassert the PE0_hotreset */ + if (port->endpoint) + mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01111000); + else + mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x01101000); + + /* poll for phy !reset */ + /* XXX FIXME add timeout */ + while (!(mfdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSTA) & 0x00001000)) + ; + + /* deassert the PE0_gpl_utl_reset */ + mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, 0x00101000); +} + +static int ppc405ex_pciex_init_port_hw(struct ppc4xx_pciex_port *port) +{ + u32 val; + + if (port->endpoint) + val = PTYPE_LEGACY_ENDPOINT; + else + val = PTYPE_ROOT_PORT; + + mtdcri(SDR0, port->sdr_base + PESDRn_DLPSET, + 1 << 24 | val << 20 | LNKW_X1 << 12); + + mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET1, 0x00000000); + mtdcri(SDR0, port->sdr_base + PESDRn_UTLSET2, 0x01010000); + mtdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSET1, 0x720F0000); + mtdcri(SDR0, port->sdr_base + PESDRn_405EX_PHYSET2, 0x70600003); + + /* + * Only reset the PHY when no link is currently established. + * This is for the Atheros PCIe board which has problems to establish + * the link (again) after this PHY reset. All other currently tested + * PCIe boards don't show this problem. + * This has to be re-tested and fixed in a later release! + */ +#if 0 /* XXX FIXME: Not resetting the PHY will leave all resources + * configured as done previously by U-Boot. Then Linux will currently + * not reassign them. So the PHY reset is now done always. This will + * lead to problems with the Atheros PCIe board again. + */ + val = mfdcri(SDR0, port->sdr_base + PESDRn_LOOP); + if (!(val & 0x00001000)) + ppc405ex_pcie_phy_reset(port); +#else + ppc405ex_pcie_phy_reset(port); +#endif + + dcr_write(port->dcrs, DCRO_PEGPL_CFG, 0x10000000); /* guarded on */ + + port->has_ibpre = 1; + + return 0; +} + +static int ppc405ex_pciex_init_utl(struct ppc4xx_pciex_port *port) +{ + dcr_write(port->dcrs, DCRO_PEGPL_SPECIAL, 0x0); + + /* + * Set buffer allocations and then assert VRB and TXE. + */ + out_be32(port->utl_base + PEUTL_OUTTR, 0x02000000); + out_be32(port->utl_base + PEUTL_INTR, 0x02000000); + out_be32(port->utl_base + PEUTL_OPDBSZ, 0x04000000); + out_be32(port->utl_base + PEUTL_PBBSZ, 0x21000000); + out_be32(port->utl_base + PEUTL_IPHBSZ, 0x02000000); + out_be32(port->utl_base + PEUTL_IPDBSZ, 0x04000000); + out_be32(port->utl_base + PEUTL_RCIRQEN, 0x00f00000); + out_be32(port->utl_base + PEUTL_PCTL, 0x80800066); + + out_be32(port->utl_base + PEUTL_PBCTL, 0x08000000); + + return 0; +} + +static struct ppc4xx_pciex_hwops ppc405ex_pcie_hwops __initdata = +{ + .core_init = ppc405ex_pciex_core_init, + .port_init_hw = ppc405ex_pciex_init_port_hw, + .setup_utl = ppc405ex_pciex_init_utl, +}; + +#endif /* CONFIG_40x */ + + +/* Check that the core has been initied and if not, do it */ +static int __init ppc4xx_pciex_check_core_init(struct device_node *np) +{ + static int core_init; + int count = -ENODEV; + + if (core_init++) + return 0; + +#ifdef CONFIG_44x + if (of_device_is_compatible(np, "ibm,plb-pciex-440spe")) { + if (ppc440spe_revA()) + ppc4xx_pciex_hwops = &ppc440speA_pcie_hwops; + else + ppc4xx_pciex_hwops = &ppc440speB_pcie_hwops; + } +#endif /* CONFIG_44x */ +#ifdef CONFIG_40x + if (of_device_is_compatible(np, "ibm,plb-pciex-405ex")) + ppc4xx_pciex_hwops = &ppc405ex_pcie_hwops; +#endif + if (ppc4xx_pciex_hwops == NULL) { + printk(KERN_WARNING "PCIE: unknown host type %s\n", + np->full_name); + return -ENODEV; + } + + count = ppc4xx_pciex_hwops->core_init(np); + if (count > 0) { + ppc4xx_pciex_ports = + kzalloc(count * sizeof(struct ppc4xx_pciex_port), + GFP_KERNEL); + if (ppc4xx_pciex_ports) { + ppc4xx_pciex_port_count = count; + return 0; + } + printk(KERN_WARNING "PCIE: failed to allocate ports array\n"); + return -ENOMEM; + } + return -ENODEV; +} + +static void __init ppc4xx_pciex_port_init_mapping(struct ppc4xx_pciex_port *port) +{ + /* We map PCI Express configuration based on the reg property */ + dcr_write(port->dcrs, DCRO_PEGPL_CFGBAH, + RES_TO_U32_HIGH(port->cfg_space.start)); + dcr_write(port->dcrs, DCRO_PEGPL_CFGBAL, + RES_TO_U32_LOW(port->cfg_space.start)); + + /* XXX FIXME: Use size from reg property. For now, map 512M */ + dcr_write(port->dcrs, DCRO_PEGPL_CFGMSK, 0xe0000001); + + /* We map UTL registers based on the reg property */ + dcr_write(port->dcrs, DCRO_PEGPL_REGBAH, + RES_TO_U32_HIGH(port->utl_regs.start)); + dcr_write(port->dcrs, DCRO_PEGPL_REGBAL, + RES_TO_U32_LOW(port->utl_regs.start)); + + /* XXX FIXME: Use size from reg property */ + dcr_write(port->dcrs, DCRO_PEGPL_REGMSK, 0x00007001); + + /* Disable all other outbound windows */ + dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, 0); + dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL, 0); + dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, 0); + dcr_write(port->dcrs, DCRO_PEGPL_MSGMSK, 0); +} + +static int __init ppc4xx_pciex_wait_on_sdr(struct ppc4xx_pciex_port *port, + unsigned int sdr_offset, + unsigned int mask, + unsigned int value, + int timeout_ms) +{ + u32 val; + + while(timeout_ms--) { + val = mfdcri(SDR0, port->sdr_base + sdr_offset); + if ((val & mask) == value) { + pr_debug("PCIE%d: Wait on SDR %x success with tm %d (%08x)\n", + port->index, sdr_offset, timeout_ms, val); + return 0; + } + msleep(1); + } + return -1; +} + +static int __init ppc4xx_pciex_port_init(struct ppc4xx_pciex_port *port) +{ + int rc = 0; + + /* Init HW */ + if (ppc4xx_pciex_hwops->port_init_hw) + rc = ppc4xx_pciex_hwops->port_init_hw(port); + if (rc != 0) + return rc; + + printk(KERN_INFO "PCIE%d: Checking link...\n", + port->index); + + /* Wait for reset to complete */ + if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS, 1 << 20, 0, 10)) { + printk(KERN_WARNING "PCIE%d: PGRST failed\n", + port->index); + return -1; + } + + /* Check for card presence detect if supported, if not, just wait for + * link unconditionally. + * + * note that we don't fail if there is no link, we just filter out + * config space accesses. That way, it will be easier to implement + * hotplug later on. + */ + if (!port->has_ibpre || + !ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP, + 1 << 28, 1 << 28, 100)) { + printk(KERN_INFO + "PCIE%d: Device detected, waiting for link...\n", + port->index); + if (ppc4xx_pciex_wait_on_sdr(port, PESDRn_LOOP, + 0x1000, 0x1000, 2000)) + printk(KERN_WARNING + "PCIE%d: Link up failed\n", port->index); + else { + printk(KERN_INFO + "PCIE%d: link is up !\n", port->index); + port->link = 1; + } + } else + printk(KERN_INFO "PCIE%d: No device detected.\n", port->index); + + /* + * Initialize mapping: disable all regions and configure + * CFG and REG regions based on resources in the device tree + */ + ppc4xx_pciex_port_init_mapping(port); + + /* + * Map UTL + */ + port->utl_base = ioremap(port->utl_regs.start, 0x100); + BUG_ON(port->utl_base == NULL); + + /* + * Setup UTL registers --BenH. + */ + if (ppc4xx_pciex_hwops->setup_utl) + ppc4xx_pciex_hwops->setup_utl(port); + + /* + * Check for VC0 active and assert RDY. + */ + if (port->link && + ppc4xx_pciex_wait_on_sdr(port, PESDRn_RCSSTS, + 1 << 16, 1 << 16, 5000)) { + printk(KERN_INFO "PCIE%d: VC0 not active\n", port->index); + port->link = 0; + } + + mtdcri(SDR0, port->sdr_base + PESDRn_RCSSET, + mfdcri(SDR0, port->sdr_base + PESDRn_RCSSET) | 1 << 20); + msleep(100); + + return 0; +} + +static int ppc4xx_pciex_validate_bdf(struct ppc4xx_pciex_port *port, + struct pci_bus *bus, + unsigned int devfn) +{ + static int message; + + /* Endpoint can not generate upstream(remote) config cycles */ + if (port->endpoint && bus->number != port->hose->first_busno) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* Check we are within the mapped range */ + if (bus->number > port->hose->last_busno) { + if (!message) { + printk(KERN_WARNING "Warning! Probing bus %u" + " out of range !\n", bus->number); + message++; + } + return PCIBIOS_DEVICE_NOT_FOUND; + } + + /* The root complex has only one device / function */ + if (bus->number == port->hose->first_busno && devfn != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* The other side of the RC has only one device as well */ + if (bus->number == (port->hose->first_busno + 1) && + PCI_SLOT(devfn) != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + /* Check if we have a link */ + if ((bus->number != port->hose->first_busno) && !port->link) + return PCIBIOS_DEVICE_NOT_FOUND; + + return 0; +} + +static void __iomem *ppc4xx_pciex_get_config_base(struct ppc4xx_pciex_port *port, + struct pci_bus *bus, + unsigned int devfn) +{ + int relbus; + + /* Remove the casts when we finally remove the stupid volatile + * in struct pci_controller + */ + if (bus->number == port->hose->first_busno) + return (void __iomem *)port->hose->cfg_addr; + + relbus = bus->number - (port->hose->first_busno + 1); + return (void __iomem *)port->hose->cfg_data + + ((relbus << 20) | (devfn << 12)); +} + +static int ppc4xx_pciex_read_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 *val) +{ + struct pci_controller *hose = (struct pci_controller *) bus->sysdata; + struct ppc4xx_pciex_port *port = + &ppc4xx_pciex_ports[hose->indirect_type]; + void __iomem *addr; + u32 gpl_cfg; + + BUG_ON(hose != port->hose); + + if (ppc4xx_pciex_validate_bdf(port, bus, devfn) != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = ppc4xx_pciex_get_config_base(port, bus, devfn); + + /* + * Reading from configuration space of non-existing device can + * generate transaction errors. For the read duration we suppress + * assertion of machine check exceptions to avoid those. + */ + gpl_cfg = dcr_read(port->dcrs, DCRO_PEGPL_CFG); + dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg | GPL_DMER_MASK_DISA); + + /* Make sure no CRS is recorded */ + out_be32(port->utl_base + PEUTL_RCSTA, 0x00040000); + + switch (len) { + case 1: + *val = in_8((u8 *)(addr + offset)); + break; + case 2: + *val = in_le16((u16 *)(addr + offset)); + break; + default: + *val = in_le32((u32 *)(addr + offset)); + break; + } + + pr_debug("pcie-config-read: bus=%3d [%3d..%3d] devfn=0x%04x" + " offset=0x%04x len=%d, addr=0x%p val=0x%08x\n", + bus->number, hose->first_busno, hose->last_busno, + devfn, offset, len, addr + offset, *val); + + /* Check for CRS (440SPe rev B does that for us but heh ..) */ + if (in_be32(port->utl_base + PEUTL_RCSTA) & 0x00040000) { + pr_debug("Got CRS !\n"); + if (len != 4 || offset != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + *val = 0xffff0001; + } + + dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg); + + return PCIBIOS_SUCCESSFUL; +} + +static int ppc4xx_pciex_write_config(struct pci_bus *bus, unsigned int devfn, + int offset, int len, u32 val) +{ + struct pci_controller *hose = (struct pci_controller *) bus->sysdata; + struct ppc4xx_pciex_port *port = + &ppc4xx_pciex_ports[hose->indirect_type]; + void __iomem *addr; + u32 gpl_cfg; + + if (ppc4xx_pciex_validate_bdf(port, bus, devfn) != 0) + return PCIBIOS_DEVICE_NOT_FOUND; + + addr = ppc4xx_pciex_get_config_base(port, bus, devfn); + + /* + * Reading from configuration space of non-existing device can + * generate transaction errors. For the read duration we suppress + * assertion of machine check exceptions to avoid those. + */ + gpl_cfg = dcr_read(port->dcrs, DCRO_PEGPL_CFG); + dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg | GPL_DMER_MASK_DISA); + + pr_debug("pcie-config-write: bus=%3d [%3d..%3d] devfn=0x%04x" + " offset=0x%04x len=%d, addr=0x%p val=0x%08x\n", + bus->number, hose->first_busno, hose->last_busno, + devfn, offset, len, addr + offset, val); + + switch (len) { + case 1: + out_8((u8 *)(addr + offset), val); + break; + case 2: + out_le16((u16 *)(addr + offset), val); + break; + default: + out_le32((u32 *)(addr + offset), val); + break; + } + + dcr_write(port->dcrs, DCRO_PEGPL_CFG, gpl_cfg); + + return PCIBIOS_SUCCESSFUL; +} + +static struct pci_ops ppc4xx_pciex_pci_ops = +{ + .read = ppc4xx_pciex_read_config, + .write = ppc4xx_pciex_write_config, +}; + +static void __init ppc4xx_configure_pciex_POMs(struct ppc4xx_pciex_port *port, + struct pci_controller *hose, + void __iomem *mbase) +{ + u32 lah, lal, pciah, pcial, sa; + int i, j; + + /* Setup outbound memory windows */ + for (i = j = 0; i < 3; i++) { + struct resource *res = &hose->mem_resources[i]; + + /* we only care about memory windows */ + if (!(res->flags & IORESOURCE_MEM)) + continue; + if (j > 1) { + printk(KERN_WARNING "%s: Too many ranges\n", + port->node->full_name); + break; + } + + /* Calculate register values */ + lah = RES_TO_U32_HIGH(res->start); + lal = RES_TO_U32_LOW(res->start); + pciah = RES_TO_U32_HIGH(res->start - hose->pci_mem_offset); + pcial = RES_TO_U32_LOW(res->start - hose->pci_mem_offset); + sa = res->end + 1 - res->start; + if (!is_power_of_2(sa) || sa < 0x100000 || + sa > 0xffffffffu) { + printk(KERN_WARNING "%s: Resource out of range\n", + port->node->full_name); + continue; + } + sa = (0xffffffffu << ilog2(sa)) | 0x1; + + /* Program register values */ + switch (j) { + case 0: + out_le32(mbase + PECFG_POM0LAH, pciah); + out_le32(mbase + PECFG_POM0LAL, pcial); + dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAH, lah); + dcr_write(port->dcrs, DCRO_PEGPL_OMR1BAL, lal); + dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKH, 0x7fffffff); + dcr_write(port->dcrs, DCRO_PEGPL_OMR1MSKL, sa | 3); + break; + case 1: + out_le32(mbase + PECFG_POM1LAH, pciah); + out_le32(mbase + PECFG_POM1LAL, pcial); + dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAH, lah); + dcr_write(port->dcrs, DCRO_PEGPL_OMR2BAL, lal); + dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKH, 0x7fffffff); + dcr_write(port->dcrs, DCRO_PEGPL_OMR2MSKL, sa | 3); + break; + } + j++; + } + + /* Configure IO, always 64K starting at 0 */ + if (hose->io_resource.flags & IORESOURCE_IO) { + lah = RES_TO_U32_HIGH(hose->io_base_phys); + lal = RES_TO_U32_LOW(hose->io_base_phys); + out_le32(mbase + PECFG_POM2LAH, 0); + out_le32(mbase + PECFG_POM2LAL, 0); + dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAH, lah); + dcr_write(port->dcrs, DCRO_PEGPL_OMR3BAL, lal); + dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKH, 0x7fffffff); + dcr_write(port->dcrs, DCRO_PEGPL_OMR3MSKL, 0xffff0000 | 3); + } +} + +static void __init ppc4xx_configure_pciex_PIMs(struct ppc4xx_pciex_port *port, + struct pci_controller *hose, + void __iomem *mbase, + struct resource *res) +{ + resource_size_t size = res->end - res->start + 1; + u64 sa; + + /* Calculate window size */ + sa = (0xffffffffffffffffull << ilog2(size));; + if (res->flags & IORESOURCE_PREFETCH) + sa |= 0x8; + + out_le32(mbase + PECFG_BAR0HMPA, RES_TO_U32_HIGH(sa)); + out_le32(mbase + PECFG_BAR0LMPA, RES_TO_U32_LOW(sa)); + + /* The setup of the split looks weird to me ... let's see if it works */ + out_le32(mbase + PECFG_PIM0LAL, 0x00000000); + out_le32(mbase + PECFG_PIM0LAH, 0x00000000); + out_le32(mbase + PECFG_PIM1LAL, 0x00000000); + out_le32(mbase + PECFG_PIM1LAH, 0x00000000); + out_le32(mbase + PECFG_PIM01SAH, 0xffff0000); + out_le32(mbase + PECFG_PIM01SAL, 0x00000000); + + /* Enable inbound mapping */ + out_le32(mbase + PECFG_PIMEN, 0x1); + + out_le32(mbase + PCI_BASE_ADDRESS_0, RES_TO_U32_LOW(res->start)); + out_le32(mbase + PCI_BASE_ADDRESS_1, RES_TO_U32_HIGH(res->start)); + + /* Enable I/O, Mem, and Busmaster cycles */ + out_le16(mbase + PCI_COMMAND, + in_le16(mbase + PCI_COMMAND) | + PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER); +} + +static void __init ppc4xx_pciex_port_setup_hose(struct ppc4xx_pciex_port *port) +{ + struct resource dma_window; + struct pci_controller *hose = NULL; + const int *bus_range; + int primary = 0, busses; + void __iomem *mbase = NULL, *cfg_data = NULL; + + /* XXX FIXME: Handle endpoint mode properly */ + if (port->endpoint) { + printk(KERN_WARNING "PCIE%d: Port in endpoint mode !\n", + port->index); + return; + } + + /* Check if primary bridge */ + if (of_get_property(port->node, "primary", NULL)) + primary = 1; + + /* Get bus range if any */ + bus_range = of_get_property(port->node, "bus-range", NULL); + + /* Allocate the host controller data structure */ + hose = pcibios_alloc_controller(port->node); + if (!hose) + goto fail; + + /* We stick the port number in "indirect_type" so the config space + * ops can retrieve the port data structure easily + */ + hose->indirect_type = port->index; + + /* Get bus range */ + hose->first_busno = bus_range ? bus_range[0] : 0x0; + hose->last_busno = bus_range ? bus_range[1] : 0xff; + + /* Because of how big mapping the config space is (1M per bus), we + * limit how many busses we support. In the long run, we could replace + * that with something akin to kmap_atomic instead. We set aside 1 bus + * for the host itself too. + */ + busses = hose->last_busno - hose->first_busno; /* This is off by 1 */ + if (busses > MAX_PCIE_BUS_MAPPED) { + busses = MAX_PCIE_BUS_MAPPED; + hose->last_busno = hose->first_busno + busses; + } + + /* We map the external config space in cfg_data and the host config + * space in cfg_addr. External space is 1M per bus, internal space + * is 4K + */ + cfg_data = ioremap(port->cfg_space.start + + (hose->first_busno + 1) * 0x100000, + busses * 0x100000); + mbase = ioremap(port->cfg_space.start + 0x10000000, 0x1000); + if (cfg_data == NULL || mbase == NULL) { + printk(KERN_ERR "%s: Can't map config space !", + port->node->full_name); + goto fail; + } + + hose->cfg_data = cfg_data; + hose->cfg_addr = mbase; + + pr_debug("PCIE %s, bus %d..%d\n", port->node->full_name, + hose->first_busno, hose->last_busno); + pr_debug(" config space mapped at: root @0x%p, other @0x%p\n", + hose->cfg_addr, hose->cfg_data); + + /* Setup config space */ + hose->ops = &ppc4xx_pciex_pci_ops; + port->hose = hose; + mbase = (void __iomem *)hose->cfg_addr; + + /* + * Set bus numbers on our root port + */ + out_8(mbase + PCI_PRIMARY_BUS, hose->first_busno); + out_8(mbase + PCI_SECONDARY_BUS, hose->first_busno + 1); + out_8(mbase + PCI_SUBORDINATE_BUS, hose->last_busno); + + /* + * OMRs are already reset, also disable PIMs + */ + out_le32(mbase + PECFG_PIMEN, 0); + + /* Parse outbound mapping resources */ + pci_process_bridge_OF_ranges(hose, port->node, primary); + + /* Parse inbound mapping resources */ + if (ppc4xx_parse_dma_ranges(hose, mbase, &dma_window) != 0) + goto fail; + + /* Configure outbound ranges POMs */ + ppc4xx_configure_pciex_POMs(port, hose, mbase); + + /* Configure inbound ranges PIMs */ + ppc4xx_configure_pciex_PIMs(port, hose, mbase, &dma_window); + + /* The root complex doesn't show up if we don't set some vendor + * and device IDs into it. Those are the same bogus one that the + * initial code in arch/ppc add. We might want to change that. + */ + out_le16(mbase + 0x200, 0xaaa0 + port->index); + out_le16(mbase + 0x202, 0xbed0 + port->index); + + /* Set Class Code to PCI-PCI bridge and Revision Id to 1 */ + out_le32(mbase + 0x208, 0x06040001); + + printk(KERN_INFO "PCIE%d: successfully set as root-complex\n", + port->index); + return; + fail: + if (hose) + pcibios_free_controller(hose); + if (cfg_data) + iounmap(cfg_data); + if (mbase) + iounmap(mbase); +} + +static void __init ppc4xx_probe_pciex_bridge(struct device_node *np) +{ + struct ppc4xx_pciex_port *port; + const u32 *pval; + int portno; + unsigned int dcrs; + + /* First, proceed to core initialization as we assume there's + * only one PCIe core in the system + */ + if (ppc4xx_pciex_check_core_init(np)) + return; + + /* Get the port number from the device-tree */ + pval = of_get_property(np, "port", NULL); + if (pval == NULL) { + printk(KERN_ERR "PCIE: Can't find port number for %s\n", + np->full_name); + return; + } + portno = *pval; + if (portno >= ppc4xx_pciex_port_count) { + printk(KERN_ERR "PCIE: port number out of range for %s\n", + np->full_name); + return; + } + port = &ppc4xx_pciex_ports[portno]; + port->index = portno; + port->node = of_node_get(np); + pval = of_get_property(np, "sdr-base", NULL); + if (pval == NULL) { + printk(KERN_ERR "PCIE: missing sdr-base for %s\n", + np->full_name); + return; + } + port->sdr_base = *pval; + + /* XXX Currently, we only support root complex mode */ + port->endpoint = 0; + + /* Fetch config space registers address */ + if (of_address_to_resource(np, 0, &port->cfg_space)) { + printk(KERN_ERR "%s: Can't get PCI-E config space !", + np->full_name); + return; + } + /* Fetch host bridge internal registers address */ + if (of_address_to_resource(np, 1, &port->utl_regs)) { + printk(KERN_ERR "%s: Can't get UTL register base !", + np->full_name); + return; + } + + /* Map DCRs */ + dcrs = dcr_resource_start(np, 0); + if (dcrs == 0) { + printk(KERN_ERR "%s: Can't get DCR register base !", + np->full_name); + return; + } + port->dcrs = dcr_map(np, dcrs, dcr_resource_len(np, 0)); + + /* Initialize the port specific registers */ + if (ppc4xx_pciex_port_init(port)) { + printk(KERN_WARNING "PCIE%d: Port init failed\n", port->index); + return; + } + + /* Setup the linux hose data structure */ + ppc4xx_pciex_port_setup_hose(port); +} + +#endif /* CONFIG_PPC4xx_PCI_EXPRESS */ + +static int __init ppc4xx_pci_find_bridges(void) +{ + struct device_node *np; + +#ifdef CONFIG_PPC4xx_PCI_EXPRESS + for_each_compatible_node(np, NULL, "ibm,plb-pciex") + ppc4xx_probe_pciex_bridge(np); +#endif + for_each_compatible_node(np, NULL, "ibm,plb-pcix") + ppc4xx_probe_pcix_bridge(np); + for_each_compatible_node(np, NULL, "ibm,plb-pci") + ppc4xx_probe_pci_bridge(np); + + return 0; +} +arch_initcall(ppc4xx_pci_find_bridges); + diff --git a/arch/powerpc/sysdev/ppc4xx_pci.h b/arch/powerpc/sysdev/ppc4xx_pci.h new file mode 100644 index 00000000000..1c07908dc6e --- /dev/null +++ b/arch/powerpc/sysdev/ppc4xx_pci.h @@ -0,0 +1,369 @@ +/* + * PCI / PCI-X / PCI-Express support for 4xx parts + * + * Copyright 2007 Ben. Herrenschmidt <benh@kernel.crashing.org>, IBM Corp. + * + * Bits and pieces extracted from arch/ppc support by + * + * Matt Porter <mporter@kernel.crashing.org> + * + * Copyright 2002-2005 MontaVista Software Inc. + */ +#ifndef __PPC4XX_PCI_H__ +#define __PPC4XX_PCI_H__ + +/* + * 4xx PCI-X bridge register definitions + */ +#define PCIX0_VENDID 0x000 +#define PCIX0_DEVID 0x002 +#define PCIX0_COMMAND 0x004 +#define PCIX0_STATUS 0x006 +#define PCIX0_REVID 0x008 +#define PCIX0_CLS 0x009 +#define PCIX0_CACHELS 0x00c +#define PCIX0_LATTIM 0x00d +#define PCIX0_HDTYPE 0x00e +#define PCIX0_BIST 0x00f +#define PCIX0_BAR0L 0x010 +#define PCIX0_BAR0H 0x014 +#define PCIX0_BAR1 0x018 +#define PCIX0_BAR2L 0x01c +#define PCIX0_BAR2H 0x020 +#define PCIX0_BAR3 0x024 +#define PCIX0_CISPTR 0x028 +#define PCIX0_SBSYSVID 0x02c +#define PCIX0_SBSYSID 0x02e +#define PCIX0_EROMBA 0x030 +#define PCIX0_CAP 0x034 +#define PCIX0_RES0 0x035 +#define PCIX0_RES1 0x036 +#define PCIX0_RES2 0x038 +#define PCIX0_INTLN 0x03c +#define PCIX0_INTPN 0x03d +#define PCIX0_MINGNT 0x03e +#define PCIX0_MAXLTNCY 0x03f +#define PCIX0_BRDGOPT1 0x040 +#define PCIX0_BRDGOPT2 0x044 +#define PCIX0_ERREN 0x050 +#define PCIX0_ERRSTS 0x054 +#define PCIX0_PLBBESR 0x058 +#define PCIX0_PLBBEARL 0x05c +#define PCIX0_PLBBEARH 0x060 +#define PCIX0_POM0LAL 0x068 +#define PCIX0_POM0LAH 0x06c +#define PCIX0_POM0SA 0x070 +#define PCIX0_POM0PCIAL 0x074 +#define PCIX0_POM0PCIAH 0x078 +#define PCIX0_POM1LAL 0x07c +#define PCIX0_POM1LAH 0x080 +#define PCIX0_POM1SA 0x084 +#define PCIX0_POM1PCIAL 0x088 +#define PCIX0_POM1PCIAH 0x08c +#define PCIX0_POM2SA 0x090 +#define PCIX0_PIM0SAL 0x098 +#define PCIX0_PIM0SA PCIX0_PIM0SAL +#define PCIX0_PIM0LAL 0x09c +#define PCIX0_PIM0LAH 0x0a0 +#define PCIX0_PIM1SA 0x0a4 +#define PCIX0_PIM1LAL 0x0a8 +#define PCIX0_PIM1LAH 0x0ac +#define PCIX0_PIM2SAL 0x0b0 +#define PCIX0_PIM2SA PCIX0_PIM2SAL +#define PCIX0_PIM2LAL 0x0b4 +#define PCIX0_PIM2LAH 0x0b8 +#define PCIX0_OMCAPID 0x0c0 +#define PCIX0_OMNIPTR 0x0c1 +#define PCIX0_OMMC 0x0c2 +#define PCIX0_OMMA 0x0c4 +#define PCIX0_OMMUA 0x0c8 +#define PCIX0_OMMDATA 0x0cc +#define PCIX0_OMMEOI 0x0ce +#define PCIX0_PMCAPID 0x0d0 +#define PCIX0_PMNIPTR 0x0d1 +#define PCIX0_PMC 0x0d2 +#define PCIX0_PMCSR 0x0d4 +#define PCIX0_PMCSRBSE 0x0d6 +#define PCIX0_PMDATA 0x0d7 +#define PCIX0_PMSCRR 0x0d8 +#define PCIX0_CAPID 0x0dc +#define PCIX0_NIPTR 0x0dd +#define PCIX0_CMD 0x0de +#define PCIX0_STS 0x0e0 +#define PCIX0_IDR 0x0e4 +#define PCIX0_CID 0x0e8 +#define PCIX0_RID 0x0ec +#define PCIX0_PIM0SAH 0x0f8 +#define PCIX0_PIM2SAH 0x0fc +#define PCIX0_MSGIL 0x100 +#define PCIX0_MSGIH 0x104 +#define PCIX0_MSGOL 0x108 +#define PCIX0_MSGOH 0x10c +#define PCIX0_IM 0x1f8 + +/* + * 4xx PCI bridge register definitions + */ +#define PCIL0_PMM0LA 0x00 +#define PCIL0_PMM0MA 0x04 +#define PCIL0_PMM0PCILA 0x08 +#define PCIL0_PMM0PCIHA 0x0c +#define PCIL0_PMM1LA 0x10 +#define PCIL0_PMM1MA 0x14 +#define PCIL0_PMM1PCILA 0x18 +#define PCIL0_PMM1PCIHA 0x1c +#define PCIL0_PMM2LA 0x20 +#define PCIL0_PMM2MA 0x24 +#define PCIL0_PMM2PCILA 0x28 +#define PCIL0_PMM2PCIHA 0x2c +#define PCIL0_PTM1MS 0x30 +#define PCIL0_PTM1LA 0x34 +#define PCIL0_PTM2MS 0x38 +#define PCIL0_PTM2LA 0x3c + +/* + * 4xx PCIe bridge register definitions + */ + +/* DCR offsets */ +#define DCRO_PEGPL_CFGBAH 0x00 +#define DCRO_PEGPL_CFGBAL 0x01 +#define DCRO_PEGPL_CFGMSK 0x02 +#define DCRO_PEGPL_MSGBAH 0x03 +#define DCRO_PEGPL_MSGBAL 0x04 +#define DCRO_PEGPL_MSGMSK 0x05 +#define DCRO_PEGPL_OMR1BAH 0x06 +#define DCRO_PEGPL_OMR1BAL 0x07 +#define DCRO_PEGPL_OMR1MSKH 0x08 +#define DCRO_PEGPL_OMR1MSKL 0x09 +#define DCRO_PEGPL_OMR2BAH 0x0a +#define DCRO_PEGPL_OMR2BAL 0x0b +#define DCRO_PEGPL_OMR2MSKH 0x0c +#define DCRO_PEGPL_OMR2MSKL 0x0d +#define DCRO_PEGPL_OMR3BAH 0x0e +#define DCRO_PEGPL_OMR3BAL 0x0f +#define DCRO_PEGPL_OMR3MSKH 0x10 +#define DCRO_PEGPL_OMR3MSKL 0x11 +#define DCRO_PEGPL_REGBAH 0x12 +#define DCRO_PEGPL_REGBAL 0x13 +#define DCRO_PEGPL_REGMSK 0x14 +#define DCRO_PEGPL_SPECIAL 0x15 +#define DCRO_PEGPL_CFG 0x16 +#define DCRO_PEGPL_ESR 0x17 +#define DCRO_PEGPL_EARH 0x18 +#define DCRO_PEGPL_EARL 0x19 +#define DCRO_PEGPL_EATR 0x1a + +/* DMER mask */ +#define GPL_DMER_MASK_DISA 0x02000000 + +/* + * System DCRs (SDRs) + */ +#define PESDR0_PLLLCT1 0x03a0 +#define PESDR0_PLLLCT2 0x03a1 +#define PESDR0_PLLLCT3 0x03a2 + +/* + * 440SPe additional DCRs + */ +#define PESDR0_440SPE_UTLSET1 0x0300 +#define PESDR0_440SPE_UTLSET2 0x0301 +#define PESDR0_440SPE_DLPSET 0x0302 +#define PESDR0_440SPE_LOOP 0x0303 +#define PESDR0_440SPE_RCSSET 0x0304 +#define PESDR0_440SPE_RCSSTS 0x0305 +#define PESDR0_440SPE_HSSL0SET1 0x0306 +#define PESDR0_440SPE_HSSL0SET2 0x0307 +#define PESDR0_440SPE_HSSL0STS 0x0308 +#define PESDR0_440SPE_HSSL1SET1 0x0309 +#define PESDR0_440SPE_HSSL1SET2 0x030a +#define PESDR0_440SPE_HSSL1STS 0x030b +#define PESDR0_440SPE_HSSL2SET1 0x030c +#define PESDR0_440SPE_HSSL2SET2 0x030d +#define PESDR0_440SPE_HSSL2STS 0x030e +#define PESDR0_440SPE_HSSL3SET1 0x030f +#define PESDR0_440SPE_HSSL3SET2 0x0310 +#define PESDR0_440SPE_HSSL3STS 0x0311 +#define PESDR0_440SPE_HSSL4SET1 0x0312 +#define PESDR0_440SPE_HSSL4SET2 0x0313 +#define PESDR0_440SPE_HSSL4STS 0x0314 +#define PESDR0_440SPE_HSSL5SET1 0x0315 +#define PESDR0_440SPE_HSSL5SET2 0x0316 +#define PESDR0_440SPE_HSSL5STS 0x0317 +#define PESDR0_440SPE_HSSL6SET1 0x0318 +#define PESDR0_440SPE_HSSL6SET2 0x0319 +#define PESDR0_440SPE_HSSL6STS 0x031a +#define PESDR0_440SPE_HSSL7SET1 0x031b +#define PESDR0_440SPE_HSSL7SET2 0x031c +#define PESDR0_440SPE_HSSL7STS 0x031d +#define PESDR0_440SPE_HSSCTLSET 0x031e +#define PESDR0_440SPE_LANE_ABCD 0x031f +#define PESDR0_440SPE_LANE_EFGH 0x0320 + +#define PESDR1_440SPE_UTLSET1 0x0340 +#define PESDR1_440SPE_UTLSET2 0x0341 +#define PESDR1_440SPE_DLPSET 0x0342 +#define PESDR1_440SPE_LOOP 0x0343 +#define PESDR1_440SPE_RCSSET 0x0344 +#define PESDR1_440SPE_RCSSTS 0x0345 +#define PESDR1_440SPE_HSSL0SET1 0x0346 +#define PESDR1_440SPE_HSSL0SET2 0x0347 +#define PESDR1_440SPE_HSSL0STS 0x0348 +#define PESDR1_440SPE_HSSL1SET1 0x0349 +#define PESDR1_440SPE_HSSL1SET2 0x034a +#define PESDR1_440SPE_HSSL1STS 0x034b +#define PESDR1_440SPE_HSSL2SET1 0x034c +#define PESDR1_440SPE_HSSL2SET2 0x034d +#define PESDR1_440SPE_HSSL2STS 0x034e +#define PESDR1_440SPE_HSSL3SET1 0x034f +#define PESDR1_440SPE_HSSL3SET2 0x0350 +#define PESDR1_440SPE_HSSL3STS 0x0351 +#define PESDR1_440SPE_HSSCTLSET 0x0352 +#define PESDR1_440SPE_LANE_ABCD 0x0353 + +#define PESDR2_440SPE_UTLSET1 0x0370 +#define PESDR2_440SPE_UTLSET2 0x0371 +#define PESDR2_440SPE_DLPSET 0x0372 +#define PESDR2_440SPE_LOOP 0x0373 +#define PESDR2_440SPE_RCSSET 0x0374 +#define PESDR2_440SPE_RCSSTS 0x0375 +#define PESDR2_440SPE_HSSL0SET1 0x0376 +#define PESDR2_440SPE_HSSL0SET2 0x0377 +#define PESDR2_440SPE_HSSL0STS 0x0378 +#define PESDR2_440SPE_HSSL1SET1 0x0379 +#define PESDR2_440SPE_HSSL1SET2 0x037a +#define PESDR2_440SPE_HSSL1STS 0x037b +#define PESDR2_440SPE_HSSL2SET1 0x037c +#define PESDR2_440SPE_HSSL2SET2 0x037d +#define PESDR2_440SPE_HSSL2STS 0x037e +#define PESDR2_440SPE_HSSL3SET1 0x037f +#define PESDR2_440SPE_HSSL3SET2 0x0380 +#define PESDR2_440SPE_HSSL3STS 0x0381 +#define PESDR2_440SPE_HSSCTLSET 0x0382 +#define PESDR2_440SPE_LANE_ABCD 0x0383 + +/* + * 405EX additional DCRs + */ +#define PESDR0_405EX_UTLSET1 0x0400 +#define PESDR0_405EX_UTLSET2 0x0401 +#define PESDR0_405EX_DLPSET 0x0402 +#define PESDR0_405EX_LOOP 0x0403 +#define PESDR0_405EX_RCSSET 0x0404 +#define PESDR0_405EX_RCSSTS 0x0405 +#define PESDR0_405EX_PHYSET1 0x0406 +#define PESDR0_405EX_PHYSET2 0x0407 +#define PESDR0_405EX_BIST 0x0408 +#define PESDR0_405EX_LPB 0x040B +#define PESDR0_405EX_PHYSTA 0x040C + +#define PESDR1_405EX_UTLSET1 0x0440 +#define PESDR1_405EX_UTLSET2 0x0441 +#define PESDR1_405EX_DLPSET 0x0442 +#define PESDR1_405EX_LOOP 0x0443 +#define PESDR1_405EX_RCSSET 0x0444 +#define PESDR1_405EX_RCSSTS 0x0445 +#define PESDR1_405EX_PHYSET1 0x0446 +#define PESDR1_405EX_PHYSET2 0x0447 +#define PESDR1_405EX_BIST 0x0448 +#define PESDR1_405EX_LPB 0x044B +#define PESDR1_405EX_PHYSTA 0x044C + +/* + * Of the above, some are common offsets from the base + */ +#define PESDRn_UTLSET1 0x00 +#define PESDRn_UTLSET2 0x01 +#define PESDRn_DLPSET 0x02 +#define PESDRn_LOOP 0x03 +#define PESDRn_RCSSET 0x04 +#define PESDRn_RCSSTS 0x05 + +/* 440spe only */ +#define PESDRn_440SPE_HSSL0SET1 0x06 +#define PESDRn_440SPE_HSSL0SET2 0x07 +#define PESDRn_440SPE_HSSL0STS 0x08 +#define PESDRn_440SPE_HSSL1SET1 0x09 +#define PESDRn_440SPE_HSSL1SET2 0x0a +#define PESDRn_440SPE_HSSL1STS 0x0b +#define PESDRn_440SPE_HSSL2SET1 0x0c +#define PESDRn_440SPE_HSSL2SET2 0x0d +#define PESDRn_440SPE_HSSL2STS 0x0e +#define PESDRn_440SPE_HSSL3SET1 0x0f +#define PESDRn_440SPE_HSSL3SET2 0x10 +#define PESDRn_440SPE_HSSL3STS 0x11 + +/* 440spe port 0 only */ +#define PESDRn_440SPE_HSSL4SET1 0x12 +#define PESDRn_440SPE_HSSL4SET2 0x13 +#define PESDRn_440SPE_HSSL4STS 0x14 +#define PESDRn_440SPE_HSSL5SET1 0x15 +#define PESDRn_440SPE_HSSL5SET2 0x16 +#define PESDRn_440SPE_HSSL5STS 0x17 +#define PESDRn_440SPE_HSSL6SET1 0x18 +#define PESDRn_440SPE_HSSL6SET2 0x19 +#define PESDRn_440SPE_HSSL6STS 0x1a +#define PESDRn_440SPE_HSSL7SET1 0x1b +#define PESDRn_440SPE_HSSL7SET2 0x1c +#define PESDRn_440SPE_HSSL7STS 0x1d + +/* 405ex only */ +#define PESDRn_405EX_PHYSET1 0x06 +#define PESDRn_405EX_PHYSET2 0x07 +#define PESDRn_405EX_PHYSTA 0x0c + +/* + * UTL register offsets + */ +#define PEUTL_PBCTL 0x00 +#define PEUTL_PBBSZ 0x20 +#define PEUTL_OPDBSZ 0x68 +#define PEUTL_IPHBSZ 0x70 +#define PEUTL_IPDBSZ 0x78 +#define PEUTL_OUTTR 0x90 +#define PEUTL_INTR 0x98 +#define PEUTL_PCTL 0xa0 +#define PEUTL_RCSTA 0xB0 +#define PEUTL_RCIRQEN 0xb8 + +/* + * Config space register offsets + */ +#define PECFG_ECRTCTL 0x074 + +#define PECFG_BAR0LMPA 0x210 +#define PECFG_BAR0HMPA 0x214 +#define PECFG_BAR1MPA 0x218 +#define PECFG_BAR2LMPA 0x220 +#define PECFG_BAR2HMPA 0x224 + +#define PECFG_PIMEN 0x33c +#define PECFG_PIM0LAL 0x340 +#define PECFG_PIM0LAH 0x344 +#define PECFG_PIM1LAL 0x348 +#define PECFG_PIM1LAH 0x34c +#define PECFG_PIM01SAL 0x350 +#define PECFG_PIM01SAH 0x354 + +#define PECFG_POM0LAL 0x380 +#define PECFG_POM0LAH 0x384 +#define PECFG_POM1LAL 0x388 +#define PECFG_POM1LAH 0x38c +#define PECFG_POM2LAL 0x390 +#define PECFG_POM2LAH 0x394 + + +enum +{ + PTYPE_ENDPOINT = 0x0, + PTYPE_LEGACY_ENDPOINT = 0x1, + PTYPE_ROOT_PORT = 0x4, + + LNKW_X1 = 0x1, + LNKW_X4 = 0x4, + LNKW_X8 = 0x8 +}; + + +#endif /* __PPC4XX_PCI_H__ */ diff --git a/arch/powerpc/sysdev/uic.c b/arch/powerpc/sysdev/uic.c index 847a5496b86..ae3eadddddb 100644 --- a/arch/powerpc/sysdev/uic.c +++ b/arch/powerpc/sysdev/uic.c @@ -53,21 +53,23 @@ struct uic { /* The remapper for this UIC */ struct irq_host *irqhost; - - /* For secondary UICs, the cascade interrupt's irqaction */ - struct irqaction cascade; }; static void uic_unmask_irq(unsigned int virq) { + struct irq_desc *desc = get_irq_desc(virq); struct uic *uic = get_irq_chip_data(virq); unsigned int src = uic_irq_to_hw(virq); unsigned long flags; - u32 er; + u32 er, sr; + sr = 1 << (31-src); spin_lock_irqsave(&uic->lock, flags); + /* ack level-triggered interrupts here */ + if (desc->status & IRQ_LEVEL) + mtdcr(uic->dcrbase + UIC_SR, sr); er = mfdcr(uic->dcrbase + UIC_ER); - er |= 1 << (31 - src); + er |= sr; mtdcr(uic->dcrbase + UIC_ER, er); spin_unlock_irqrestore(&uic->lock, flags); } @@ -99,6 +101,7 @@ static void uic_ack_irq(unsigned int virq) static void uic_mask_ack_irq(unsigned int virq) { + struct irq_desc *desc = get_irq_desc(virq); struct uic *uic = get_irq_chip_data(virq); unsigned int src = uic_irq_to_hw(virq); unsigned long flags; @@ -109,7 +112,16 @@ static void uic_mask_ack_irq(unsigned int virq) er = mfdcr(uic->dcrbase + UIC_ER); er &= ~sr; mtdcr(uic->dcrbase + UIC_ER, er); - mtdcr(uic->dcrbase + UIC_SR, sr); + /* On the UIC, acking (i.e. clearing the SR bit) + * a level irq will have no effect if the interrupt + * is still asserted by the device, even if + * the interrupt is already masked. Therefore + * we only ack the egde interrupts here, while + * level interrupts are ack'ed after the actual + * isr call in the uic_unmask_irq() + */ + if (!(desc->status & IRQ_LEVEL)) + mtdcr(uic->dcrbase + UIC_SR, sr); spin_unlock_irqrestore(&uic->lock, flags); } @@ -173,64 +185,6 @@ static struct irq_chip uic_irq_chip = { .set_type = uic_set_irq_type, }; -/** - * handle_uic_irq - irq flow handler for UIC - * @irq: the interrupt number - * @desc: the interrupt description structure for this irq - * - * This is modified version of the generic handle_level_irq() suitable - * for the UIC. On the UIC, acking (i.e. clearing the SR bit) a level - * irq will have no effect if the interrupt is still asserted by the - * device, even if the interrupt is already masked. Therefore, unlike - * the standard handle_level_irq(), we must ack the interrupt *after* - * invoking the ISR (which should have de-asserted the interrupt in - * the external source). For edge interrupts we ack at the beginning - * instead of the end, to keep the window in which we can miss an - * interrupt as small as possible. - */ -void fastcall handle_uic_irq(unsigned int irq, struct irq_desc *desc) -{ - unsigned int cpu = smp_processor_id(); - struct irqaction *action; - irqreturn_t action_ret; - - spin_lock(&desc->lock); - if (desc->status & IRQ_LEVEL) - desc->chip->mask(irq); - else - desc->chip->mask_ack(irq); - - if (unlikely(desc->status & IRQ_INPROGRESS)) - goto out_unlock; - desc->status &= ~(IRQ_REPLAY | IRQ_WAITING); - kstat_cpu(cpu).irqs[irq]++; - - /* - * If its disabled or no action available - * keep it masked and get out of here - */ - action = desc->action; - if (unlikely(!action || (desc->status & IRQ_DISABLED))) { - desc->status |= IRQ_PENDING; - goto out_unlock; - } - - desc->status |= IRQ_INPROGRESS; - desc->status &= ~IRQ_PENDING; - spin_unlock(&desc->lock); - - action_ret = handle_IRQ_event(irq, action); - - spin_lock(&desc->lock); - desc->status &= ~IRQ_INPROGRESS; - if (desc->status & IRQ_LEVEL) - desc->chip->ack(irq); - if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask) - desc->chip->unmask(irq); -out_unlock: - spin_unlock(&desc->lock); -} - static int uic_host_map(struct irq_host *h, unsigned int virq, irq_hw_number_t hw) { @@ -239,7 +193,7 @@ static int uic_host_map(struct irq_host *h, unsigned int virq, set_irq_chip_data(virq, uic); /* Despite the name, handle_level_irq() works for both level * and edge irqs on UIC. FIXME: check this is correct */ - set_irq_chip_and_handler(virq, &uic_irq_chip, handle_uic_irq); + set_irq_chip_and_handler(virq, &uic_irq_chip, handle_level_irq); /* Set default irq type */ set_irq_type(virq, IRQ_TYPE_NONE); @@ -264,23 +218,36 @@ static struct irq_host_ops uic_host_ops = { .xlate = uic_host_xlate, }; -irqreturn_t uic_cascade(int virq, void *data) +void uic_irq_cascade(unsigned int virq, struct irq_desc *desc) { - struct uic *uic = data; + struct uic *uic = get_irq_data(virq); u32 msr; int src; int subvirq; + spin_lock(&desc->lock); + if (desc->status & IRQ_LEVEL) + desc->chip->mask(virq); + else + desc->chip->mask_ack(virq); + spin_unlock(&desc->lock); + msr = mfdcr(uic->dcrbase + UIC_MSR); if (!msr) /* spurious interrupt */ - return IRQ_HANDLED; + goto uic_irq_ret; src = 32 - ffs(msr); subvirq = irq_linear_revmap(uic->irqhost, src); generic_handle_irq(subvirq); - return IRQ_HANDLED; +uic_irq_ret: + spin_lock(&desc->lock); + if (desc->status & IRQ_LEVEL) + desc->chip->ack(virq); + if (!(desc->status & IRQ_DISABLED) && desc->chip->unmask) + desc->chip->unmask(virq); + spin_unlock(&desc->lock); } static struct uic * __init uic_init_one(struct device_node *node) @@ -368,7 +335,6 @@ void __init uic_init_tree(void) if (interrupts) { /* Secondary UIC */ int cascade_virq; - int ret; uic = uic_init_one(np); if (! uic) @@ -377,15 +343,8 @@ void __init uic_init_tree(void) cascade_virq = irq_of_parse_and_map(np, 0); - uic->cascade.handler = uic_cascade; - uic->cascade.name = "UIC cascade"; - uic->cascade.dev_id = uic; - - ret = setup_irq(cascade_virq, &uic->cascade); - if (ret) - printk(KERN_ERR "Failed to setup_irq(%d) for " - "UIC%d cascade\n", cascade_virq, - uic->index); + set_irq_data(cascade_virq, uic); + set_irq_chained_handler(cascade_virq, uic_irq_cascade); /* FIXME: setup critical cascade?? */ } diff --git a/arch/ppc/kernel/head_44x.S b/arch/ppc/kernel/head_44x.S index 75bbc937ed7..ebb5a403829 100644 --- a/arch/ppc/kernel/head_44x.S +++ b/arch/ppc/kernel/head_44x.S @@ -195,7 +195,7 @@ skpinv: addi r4,r4,1 /* Increment */ li r5,0 ori r5,r5,(PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_I | PPC44x_TLB_G) - li r0,0 /* TLB slot 0 */ + li r0,62 /* TLB slot 62 */ tlbwe r3,r0,PPC44x_TLB_PAGEID /* Load the pageid fields */ tlbwe r4,r0,PPC44x_TLB_XLAT /* Load the translation fields */ diff --git a/arch/ppc/kernel/traps.c b/arch/ppc/kernel/traps.c index c78568905c3..25a1085fbd0 100644 --- a/arch/ppc/kernel/traps.c +++ b/arch/ppc/kernel/traps.c @@ -231,39 +231,25 @@ platform_machine_check(struct pt_regs *regs) { } -void machine_check_exception(struct pt_regs *regs) +#if defined(CONFIG_4xx) +int machine_check_4xx(struct pt_regs *regs) { unsigned long reason = get_mc_reason(regs); - if (user_mode(regs)) { - regs->msr |= MSR_RI; - _exception(SIGBUS, regs, BUS_ADRERR, regs->nip); - return; - } - -#if defined(CONFIG_8xx) && defined(CONFIG_PCI) - /* the qspan pci read routines can cause machine checks -- Cort */ - bad_page_fault(regs, regs->dar, SIGBUS); - return; -#endif - - if (debugger_fault_handler) { - debugger_fault_handler(regs); - regs->msr |= MSR_RI; - return; - } - - if (check_io_access(regs)) - return; - -#if defined(CONFIG_4xx) && !defined(CONFIG_440A) if (reason & ESR_IMCP) { printk("Instruction"); mtspr(SPRN_ESR, reason & ~ESR_IMCP); } else printk("Data"); printk(" machine check in kernel mode.\n"); -#elif defined(CONFIG_440A) + + return 0; +} + +int machine_check_440A(struct pt_regs *regs) +{ + unsigned long reason = get_mc_reason(regs); + printk("Machine check in kernel mode.\n"); if (reason & ESR_IMCP){ printk("Instruction Synchronous Machine Check exception\n"); @@ -293,7 +279,13 @@ void machine_check_exception(struct pt_regs *regs) /* Clear MCSR */ mtspr(SPRN_MCSR, mcsr); } -#elif defined (CONFIG_E500) + return 0; +} +#elif defined(CONFIG_E500) +int machine_check_e500(struct pt_regs *regs) +{ + unsigned long reason = get_mc_reason(regs); + printk("Machine check in kernel mode.\n"); printk("Caused by (from MCSR=%lx): ", reason); @@ -305,8 +297,6 @@ void machine_check_exception(struct pt_regs *regs) printk("Data Cache Push Parity Error\n"); if (reason & MCSR_DCPERR) printk("Data Cache Parity Error\n"); - if (reason & MCSR_GL_CI) - printk("Guarded Load or Cache-Inhibited stwcx.\n"); if (reason & MCSR_BUS_IAERR) printk("Bus - Instruction Address Error\n"); if (reason & MCSR_BUS_RAERR) @@ -318,12 +308,19 @@ void machine_check_exception(struct pt_regs *regs) if (reason & MCSR_BUS_RBERR) printk("Bus - Read Data Bus Error\n"); if (reason & MCSR_BUS_WBERR) - printk("Bus - Write Data Bus Error\n"); + printk("Bus - Read Data Bus Error\n"); if (reason & MCSR_BUS_IPERR) printk("Bus - Instruction Parity Error\n"); if (reason & MCSR_BUS_RPERR) printk("Bus - Read Parity Error\n"); -#elif defined (CONFIG_E200) + + return 0; +} +#elif defined(CONFIG_E200) +int machine_check_e200(struct pt_regs *regs) +{ + unsigned long reason = get_mc_reason(regs); + printk("Machine check in kernel mode.\n"); printk("Caused by (from MCSR=%lx): ", reason); @@ -341,7 +338,14 @@ void machine_check_exception(struct pt_regs *regs) printk("Bus - Read Bus Error on data load\n"); if (reason & MCSR_BUS_WRERR) printk("Bus - Write Bus Error on buffered store or cache line push\n"); -#else /* !CONFIG_4xx && !CONFIG_E500 && !CONFIG_E200 */ + + return 0; +} +#else +int machine_check_generic(struct pt_regs *regs) +{ + unsigned long reason = get_mc_reason(regs); + printk("Machine check in kernel mode.\n"); printk("Caused by (from SRR1=%lx): ", reason); switch (reason & 0x601F0000) { @@ -371,7 +375,39 @@ void machine_check_exception(struct pt_regs *regs) default: printk("Unknown values in msr\n"); } -#endif /* CONFIG_4xx */ + return 0; +} +#endif /* everything else */ + +void machine_check_exception(struct pt_regs *regs) +{ + int recover = 0; + + if (cur_cpu_spec->machine_check) + recover = cur_cpu_spec->machine_check(regs); + if (recover > 0) + return; + + if (user_mode(regs)) { + regs->msr |= MSR_RI; + _exception(SIGBUS, regs, BUS_ADRERR, regs->nip); + return; + } + +#if defined(CONFIG_8xx) && defined(CONFIG_PCI) + /* the qspan pci read routines can cause machine checks -- Cort */ + bad_page_fault(regs, regs->dar, SIGBUS); + return; +#endif + + if (debugger_fault_handler) { + debugger_fault_handler(regs); + regs->msr |= MSR_RI; + return; + } + + if (check_io_access(regs)) + return; /* * Optional platform-provided routine to print out diff --git a/arch/ppc/mm/44x_mmu.c b/arch/ppc/mm/44x_mmu.c index 6536a25cfcb..fbb577a0d16 100644 --- a/arch/ppc/mm/44x_mmu.c +++ b/arch/ppc/mm/44x_mmu.c @@ -60,38 +60,28 @@ extern char etext[], _stext[]; * Just needed it declared someplace. */ unsigned int tlb_44x_index = 0; -unsigned int tlb_44x_hwater = 62; +unsigned int tlb_44x_hwater = PPC4XX_TLB_SIZE - 1 - PPC44x_EARLY_TLBS; int icache_44x_need_flush; /* * "Pins" a 256MB TLB entry in AS0 for kernel lowmem */ -static void __init -ppc44x_pin_tlb(int slot, unsigned int virt, unsigned int phys) +static void __init ppc44x_pin_tlb(unsigned int virt, unsigned int phys) { - unsigned long attrib = 0; - - __asm__ __volatile__("\ - clrrwi %2,%2,10\n\ - ori %2,%2,%4\n\ - clrrwi %1,%1,10\n\ - li %0,0\n\ - ori %0,%0,%5\n\ - tlbwe %2,%3,%6\n\ - tlbwe %1,%3,%7\n\ - tlbwe %0,%3,%8" + __asm__ __volatile__( + "tlbwe %2,%3,%4\n" + "tlbwe %1,%3,%5\n" + "tlbwe %0,%3,%6\n" : - : "r" (attrib), "r" (phys), "r" (virt), "r" (slot), - "i" (PPC44x_TLB_VALID | PPC44x_TLB_256M), - "i" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G), + : "r" (PPC44x_TLB_SW | PPC44x_TLB_SR | PPC44x_TLB_SX | PPC44x_TLB_G), + "r" (phys), + "r" (virt | PPC44x_TLB_VALID | PPC44x_TLB_256M), + "r" (tlb_44x_hwater--), /* slot for this TLB entry */ "i" (PPC44x_TLB_PAGEID), "i" (PPC44x_TLB_XLAT), "i" (PPC44x_TLB_ATTRIB)); } -/* - * MMU_init_hw does the chip-specific initialization of the MMU hardware. - */ void __init MMU_init_hw(void) { flush_instruction_cache(); @@ -99,22 +89,13 @@ void __init MMU_init_hw(void) unsigned long __init mmu_mapin_ram(void) { - unsigned int pinned_tlbs = 1; - int i; - - /* Determine number of entries necessary to cover lowmem */ - pinned_tlbs = (unsigned int) - (_ALIGN(total_lowmem, PPC_PIN_SIZE) >> PPC44x_PIN_SHIFT); - - /* Write upper watermark to save location */ - tlb_44x_hwater = PPC44x_LOW_SLOT - pinned_tlbs; + unsigned long addr; - /* If necessary, set additional pinned TLBs */ - if (pinned_tlbs > 1) - for (i = (PPC44x_LOW_SLOT-(pinned_tlbs-1)); i < PPC44x_LOW_SLOT; i++) { - unsigned int phys_addr = (PPC44x_LOW_SLOT-i) * PPC_PIN_SIZE; - ppc44x_pin_tlb(i, phys_addr+PAGE_OFFSET, phys_addr); - } + /* Pin in enough TLBs to cover any lowmem not covered by the + * initial 256M mapping established in head_44x.S */ + for (addr = PPC_PIN_SIZE; addr < total_lowmem; + addr += PPC_PIN_SIZE) + ppc44x_pin_tlb(addr + PAGE_OFFSET, addr); return total_lowmem; } diff --git a/include/asm-powerpc/cputable.h b/include/asm-powerpc/cputable.h index 4525c784dfd..528ef183c22 100644 --- a/include/asm-powerpc/cputable.h +++ b/include/asm-powerpc/cputable.h @@ -57,6 +57,14 @@ enum powerpc_pmc_type { PPC_PMC_PA6T = 2, }; +struct pt_regs; + +extern int machine_check_generic(struct pt_regs *regs); +extern int machine_check_4xx(struct pt_regs *regs); +extern int machine_check_440A(struct pt_regs *regs); +extern int machine_check_e500(struct pt_regs *regs); +extern int machine_check_e200(struct pt_regs *regs); + /* NOTE WELL: Update identify_cpu() if fields are added or removed! */ struct cpu_spec { /* CPU is matched via (PVR & pvr_mask) == pvr_value */ @@ -97,6 +105,11 @@ struct cpu_spec { /* Name of processor class, for the ELF AT_PLATFORM entry */ char *platform; + + /* Processor specific machine check handling. Return negative + * if the error is fatal, 1 if it was fully recovered and 0 to + * pass up (not CPU originated) */ + int (*machine_check)(struct pt_regs *regs); }; extern struct cpu_spec *cur_cpu_spec; diff --git a/include/asm-powerpc/dcr-native.h b/include/asm-powerpc/dcr-native.h index 8dbb1ab0aa0..af5fb31af55 100644 --- a/include/asm-powerpc/dcr-native.h +++ b/include/asm-powerpc/dcr-native.h @@ -22,6 +22,8 @@ #ifdef __KERNEL__ #ifndef __ASSEMBLY__ +#include <linux/spinlock.h> + typedef struct { unsigned int base; } dcr_host_t; @@ -55,20 +57,28 @@ do { \ } while (0) /* R/W of indirect DCRs make use of standard naming conventions for DCRs */ -#define mfdcri(base, reg) \ -({ \ - mtdcr(base ## _CFGADDR, base ## _ ## reg); \ - mfdcr(base ## _CFGDATA); \ +extern spinlock_t dcr_ind_lock; + +#define mfdcri(base, reg) \ +({ \ + unsigned long flags; \ + unsigned int val; \ + spin_lock_irqsave(&dcr_ind_lock, flags); \ + mtdcr(DCRN_ ## base ## _CONFIG_ADDR, reg); \ + val = mfdcr(DCRN_ ## base ## _CONFIG_DATA); \ + spin_unlock_irqrestore(&dcr_ind_lock, flags); \ + val; \ }) -#define mtdcri(base, reg, data) \ -do { \ - mtdcr(base ## _CFGADDR, base ## _ ## reg); \ - mtdcr(base ## _CFGDATA, data); \ +#define mtdcri(base, reg, data) \ +do { \ + unsigned long flags; \ + spin_lock_irqsave(&dcr_ind_lock, flags); \ + mtdcr(DCRN_ ## base ## _CONFIG_ADDR, reg); \ + mtdcr(DCRN_ ## base ## _CONFIG_DATA, data); \ + spin_unlock_irqrestore(&dcr_ind_lock, flags); \ } while (0) #endif /* __ASSEMBLY__ */ #endif /* __KERNEL__ */ #endif /* _ASM_POWERPC_DCR_NATIVE_H */ - - diff --git a/include/asm-powerpc/dcr-regs.h b/include/asm-powerpc/dcr-regs.h new file mode 100644 index 00000000000..9f1fb98fcdc --- /dev/null +++ b/include/asm-powerpc/dcr-regs.h @@ -0,0 +1,71 @@ +/* + * Common DCR / SDR / CPR register definitions used on various IBM/AMCC + * 4xx processors + * + * Copyright 2007 Benjamin Herrenschmidt, IBM Corp + * <benh@kernel.crashing.org> + * + * Mostly lifted from asm-ppc/ibm4xx.h by + * + * Copyright (c) 1999 Grant Erickson <grant@lcse.umn.edu> + * + */ + +#ifndef __DCR_REGS_H__ +#define __DCR_REGS_H__ + +/* + * Most DCRs used for controlling devices such as the MAL, DMA engine, + * etc... are obtained for the device tree. + * + * The definitions in this files are fixed DCRs and indirect DCRs that + * are commonly used outside of specific drivers or refer to core + * common registers that may occasionally have to be tweaked outside + * of the driver main register set + */ + +/* CPRs (440GX and 440SP/440SPe) */ +#define DCRN_CPR0_CONFIG_ADDR 0xc +#define DCRN_CPR0_CONFIG_DATA 0xd + +/* SDRs (440GX and 440SP/440SPe) */ +#define DCRN_SDR0_CONFIG_ADDR 0xe +#define DCRN_SDR0_CONFIG_DATA 0xf + +#define SDR0_PFC0 0x4100 +#define SDR0_PFC1 0x4101 +#define SDR0_PFC1_EPS 0x1c00000 +#define SDR0_PFC1_EPS_SHIFT 22 +#define SDR0_PFC1_RMII 0x02000000 +#define SDR0_MFR 0x4300 +#define SDR0_MFR_TAH0 0x80000000 /* TAHOE0 Enable */ +#define SDR0_MFR_TAH1 0x40000000 /* TAHOE1 Enable */ +#define SDR0_MFR_PCM 0x10000000 /* PPC440GP irq compat mode */ +#define SDR0_MFR_ECS 0x08000000 /* EMAC int clk */ +#define SDR0_MFR_T0TXFL 0x00080000 +#define SDR0_MFR_T0TXFH 0x00040000 +#define SDR0_MFR_T1TXFL 0x00020000 +#define SDR0_MFR_T1TXFH 0x00010000 +#define SDR0_MFR_E0TXFL 0x00008000 +#define SDR0_MFR_E0TXFH 0x00004000 +#define SDR0_MFR_E0RXFL 0x00002000 +#define SDR0_MFR_E0RXFH 0x00001000 +#define SDR0_MFR_E1TXFL 0x00000800 +#define SDR0_MFR_E1TXFH 0x00000400 +#define SDR0_MFR_E1RXFL 0x00000200 +#define SDR0_MFR_E1RXFH 0x00000100 +#define SDR0_MFR_E2TXFL 0x00000080 +#define SDR0_MFR_E2TXFH 0x00000040 +#define SDR0_MFR_E2RXFL 0x00000020 +#define SDR0_MFR_E2RXFH 0x00000010 +#define SDR0_MFR_E3TXFL 0x00000008 +#define SDR0_MFR_E3TXFH 0x00000004 +#define SDR0_MFR_E3RXFL 0x00000002 +#define SDR0_MFR_E3RXFH 0x00000001 +#define SDR0_UART0 0x0120 +#define SDR0_UART1 0x0121 +#define SDR0_UART2 0x0122 +#define SDR0_UART3 0x0123 +#define SDR0_CUST0 0x4000 + +#endif /* __DCR_REGS_H__ */ diff --git a/include/asm-powerpc/ptrace.h b/include/asm-powerpc/ptrace.h index 13fccc5a411..c662287efd8 100644 --- a/include/asm-powerpc/ptrace.h +++ b/include/asm-powerpc/ptrace.h @@ -106,7 +106,8 @@ extern int ptrace_put_reg(struct task_struct *task, int regno, */ #define FULL_REGS(regs) (((regs)->trap & 1) == 0) #ifndef __powerpc64__ -#define IS_CRITICAL_EXC(regs) (((regs)->trap & 2) == 0) +#define IS_CRITICAL_EXC(regs) (((regs)->trap & 2) != 0) +#define IS_MCHECK_EXC(regs) (((regs)->trap & 4) != 0) #endif /* ! __powerpc64__ */ #define TRAP(regs) ((regs)->trap & ~0xF) #ifdef __powerpc64__ diff --git a/include/asm-powerpc/reg_booke.h b/include/asm-powerpc/reg_booke.h index d3e8dd0fc73..0405ef47981 100644 --- a/include/asm-powerpc/reg_booke.h +++ b/include/asm-powerpc/reg_booke.h @@ -218,7 +218,6 @@ #define CCR1_TCS 0x00000080 /* Timer Clock Select */ /* Bit definitions for the MCSR. */ -#ifdef CONFIG_440A #define MCSR_MCS 0x80000000 /* Machine Check Summary */ #define MCSR_IB 0x40000000 /* Instruction PLB Error */ #define MCSR_DRB 0x20000000 /* Data Read PLB Error */ @@ -228,7 +227,7 @@ #define MCSR_DCSP 0x02000000 /* D-Cache Search Parity Error */ #define MCSR_DCFP 0x01000000 /* D-Cache Flush Parity Error */ #define MCSR_IMPE 0x00800000 /* Imprecise Machine Check Exception */ -#endif + #ifdef CONFIG_E500 #define MCSR_MCP 0x80000000UL /* Machine Check Input Pin */ #define MCSR_ICPERR 0x40000000UL /* I-Cache Parity Error */ diff --git a/include/asm-powerpc/udbg.h b/include/asm-powerpc/udbg.h index a9e0b0ebcb0..6418ceea44b 100644 --- a/include/asm-powerpc/udbg.h +++ b/include/asm-powerpc/udbg.h @@ -48,6 +48,7 @@ extern void __init udbg_init_rtas_console(void); extern void __init udbg_init_debug_beat(void); extern void __init udbg_init_btext(void); extern void __init udbg_init_44x_as1(void); +extern void __init udbg_init_40x_realmode(void); extern void __init udbg_init_cpm(void); #endif /* __KERNEL__ */ diff --git a/include/asm-ppc/mmu.h b/include/asm-ppc/mmu.h index 14584e505ed..d46b57b589a 100644 --- a/include/asm-ppc/mmu.h +++ b/include/asm-ppc/mmu.h @@ -383,6 +383,12 @@ typedef struct _P601_BAT { #define BOOKE_PAGESZ_256GB 14 #define BOOKE_PAGESZ_1TB 15 +#ifndef CONFIG_SERIAL_TEXT_DEBUG +#define PPC44x_EARLY_TLBS 1 +#else +#define PPC44x_EARLY_TLBS 2 +#endif + /* * Freescale Book-E MMU support */ diff --git a/include/asm-ppc/reg_booke.h b/include/asm-ppc/reg_booke.h index 4cad45a055d..2f1a2afcfc2 100644 --- a/include/asm-ppc/reg_booke.h +++ b/include/asm-ppc/reg_booke.h @@ -207,7 +207,7 @@ #define CCR1_TCS 0x00000080 /* Timer Clock Select */ /* Bit definitions for the MCSR. */ -#ifdef CONFIG_440A +#ifdef CONFIG_4xx #define MCSR_MCS 0x80000000 /* Machine Check Summary */ #define MCSR_IB 0x40000000 /* Instruction PLB Error */ #define MCSR_DRB 0x20000000 /* Data Read PLB Error */ |