diff options
32 files changed, 1825 insertions, 1593 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 9ad4e6fc56f..8fd5aa40585 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -780,6 +780,9 @@ and is between 256 and 4096 characters. It is defined in the file loop use the MONITOR/MWAIT idle loop anyways. Performance should be the same as idle=poll. + ide-pci-generic.all-generic-ide [HW] (E)IDE subsystem + Claim all unknown PCI IDE storage controllers. + ignore_loglevel [KNL] Ignore loglevel setting - this will print /all/ kernel messages to the console. Useful for debugging. diff --git a/drivers/ide/Kconfig b/drivers/ide/Kconfig index 45b26ed351c..ab8fb257528 100644 --- a/drivers/ide/Kconfig +++ b/drivers/ide/Kconfig @@ -1009,6 +1009,15 @@ config BLK_DEV_Q40IDE normally be on; disable it only if you are running a custom hard drive subsystem through an expansion card. +config BLK_DEV_PALMCHIP_BK3710 + tristate "Palmchip bk3710 IDE controller support" + depends on ARCH_DAVINCI + select BLK_DEV_IDEDMA_PCI + help + Say Y here if you want to support the onchip IDE controller on the + TI DaVinci SoC + + config BLK_DEV_MPC8xx_IDE tristate "MPC8xx IDE support" depends on 8xx && (LWMON || IVMS8 || IVML24 || TQM8xxL) && IDE=y && BLK_DEV_IDE=y && !PPC_MERGE diff --git a/drivers/ide/arm/Makefile b/drivers/ide/arm/Makefile index 5f63ad21686..936e7b0237f 100644 --- a/drivers/ide/arm/Makefile +++ b/drivers/ide/arm/Makefile @@ -2,6 +2,7 @@ obj-$(CONFIG_BLK_DEV_IDE_ICSIDE) += icside.o obj-$(CONFIG_BLK_DEV_IDE_RAPIDE) += rapide.o obj-$(CONFIG_BLK_DEV_IDE_BAST) += bast-ide.o +obj-$(CONFIG_BLK_DEV_PALMCHIP_BK3710) += palm_bk3710.o ifeq ($(CONFIG_IDE_ARM), m) obj-m += ide_arm.o diff --git a/drivers/ide/arm/icside.c b/drivers/ide/arm/icside.c index fb00f3827ec..e816b0ffcfe 100644 --- a/drivers/ide/arm/icside.c +++ b/drivers/ide/arm/icside.c @@ -365,7 +365,7 @@ static void icside_dma_timeout(ide_drive_t *drive) if (icside_dma_test_irq(drive)) return; - ide_dump_status(drive, "DMA timeout", HWIF(drive)->INB(IDE_STATUS_REG)); + ide_dump_status(drive, "DMA timeout", ide_read_status(drive)); icside_dma_end(drive); } diff --git a/drivers/ide/arm/palm_bk3710.c b/drivers/ide/arm/palm_bk3710.c new file mode 100644 index 00000000000..c3069970a01 --- /dev/null +++ b/drivers/ide/arm/palm_bk3710.c @@ -0,0 +1,395 @@ +/* + * Palmchip bk3710 IDE controller + * + * Copyright (C) 2006 Texas Instruments. + * Copyright (C) 2007 MontaVista Software, Inc., <source@mvista.com> + * + * ---------------------------------------------------------------------------- + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. + * ---------------------------------------------------------------------------- + * + */ + +#include <linux/types.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/ioport.h> +#include <linux/hdreg.h> +#include <linux/ide.h> +#include <linux/delay.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/platform_device.h> + +/* Offset of the primary interface registers */ +#define IDE_PALM_ATA_PRI_REG_OFFSET 0x1F0 + +/* Primary Control Offset */ +#define IDE_PALM_ATA_PRI_CTL_OFFSET 0x3F6 + +/* + * PalmChip 3710 IDE Controller UDMA timing structure Definition + */ +struct palm_bk3710_udmatiming { + unsigned int rptime; /* Ready to pause time */ + unsigned int cycletime; /* Cycle Time */ +}; + +#define BK3710_BMICP 0x00 +#define BK3710_BMISP 0x02 +#define BK3710_BMIDTP 0x04 +#define BK3710_BMICS 0x08 +#define BK3710_BMISS 0x0A +#define BK3710_BMIDTS 0x0C +#define BK3710_IDETIMP 0x40 +#define BK3710_IDETIMS 0x42 +#define BK3710_SIDETIM 0x44 +#define BK3710_SLEWCTL 0x45 +#define BK3710_IDESTATUS 0x47 +#define BK3710_UDMACTL 0x48 +#define BK3710_UDMATIM 0x4A +#define BK3710_MISCCTL 0x50 +#define BK3710_REGSTB 0x54 +#define BK3710_REGRCVR 0x58 +#define BK3710_DATSTB 0x5C +#define BK3710_DATRCVR 0x60 +#define BK3710_DMASTB 0x64 +#define BK3710_DMARCVR 0x68 +#define BK3710_UDMASTB 0x6C +#define BK3710_UDMATRP 0x70 +#define BK3710_UDMAENV 0x74 +#define BK3710_IORDYTMP 0x78 +#define BK3710_IORDYTMS 0x7C + +#include "../ide-timing.h" + +static long ide_palm_clk; + +static const struct palm_bk3710_udmatiming palm_bk3710_udmatimings[6] = { + {160, 240}, /* UDMA Mode 0 */ + {125, 160}, /* UDMA Mode 1 */ + {100, 120}, /* UDMA Mode 2 */ + {100, 90}, /* UDMA Mode 3 */ + {85, 60}, /* UDMA Mode 4 */ +}; + +static struct clk *ideclkp; + +static void palm_bk3710_setudmamode(void __iomem *base, unsigned int dev, + unsigned int mode) +{ + u8 tenv, trp, t0; + u32 val32; + u16 val16; + + /* DMA Data Setup */ + t0 = (palm_bk3710_udmatimings[mode].cycletime + ide_palm_clk - 1) + / ide_palm_clk - 1; + tenv = (20 + ide_palm_clk - 1) / ide_palm_clk - 1; + trp = (palm_bk3710_udmatimings[mode].rptime + ide_palm_clk - 1) + / ide_palm_clk - 1; + + /* udmatim Register */ + val16 = readw(base + BK3710_UDMATIM) & (dev ? 0xFF0F : 0xFFF0); + val16 |= (mode << (dev ? 4 : 0)); + writew(val16, base + BK3710_UDMATIM); + + /* udmastb Ultra DMA Access Strobe Width */ + val32 = readl(base + BK3710_UDMASTB) & (0xFF << (dev ? 0 : 8)); + val32 |= (t0 << (dev ? 8 : 0)); + writel(val32, base + BK3710_UDMASTB); + + /* udmatrp Ultra DMA Ready to Pause Time */ + val32 = readl(base + BK3710_UDMATRP) & (0xFF << (dev ? 0 : 8)); + val32 |= (trp << (dev ? 8 : 0)); + writel(val32, base + BK3710_UDMATRP); + + /* udmaenv Ultra DMA envelop Time */ + val32 = readl(base + BK3710_UDMAENV) & (0xFF << (dev ? 0 : 8)); + val32 |= (tenv << (dev ? 8 : 0)); + writel(val32, base + BK3710_UDMAENV); + + /* Enable UDMA for Device */ + val16 = readw(base + BK3710_UDMACTL) | (1 << dev); + writew(val16, base + BK3710_UDMACTL); +} + +static void palm_bk3710_setdmamode(void __iomem *base, unsigned int dev, + unsigned short min_cycle, + unsigned int mode) +{ + u8 td, tkw, t0; + u32 val32; + u16 val16; + struct ide_timing *t; + int cycletime; + + t = ide_timing_find_mode(mode); + cycletime = max_t(int, t->cycle, min_cycle); + + /* DMA Data Setup */ + t0 = (cycletime + ide_palm_clk - 1) / ide_palm_clk; + td = (t->active + ide_palm_clk - 1) / ide_palm_clk; + tkw = t0 - td - 1; + td -= 1; + + val32 = readl(base + BK3710_DMASTB) & (0xFF << (dev ? 0 : 8)); + val32 |= (td << (dev ? 8 : 0)); + writel(val32, base + BK3710_DMASTB); + + val32 = readl(base + BK3710_DMARCVR) & (0xFF << (dev ? 0 : 8)); + val32 |= (tkw << (dev ? 8 : 0)); + writel(val32, base + BK3710_DMARCVR); + + /* Disable UDMA for Device */ + val16 = readw(base + BK3710_UDMACTL) & ~(1 << dev); + writew(val16, base + BK3710_UDMACTL); +} + +static void palm_bk3710_setpiomode(void __iomem *base, ide_drive_t *mate, + unsigned int dev, unsigned int cycletime, + unsigned int mode) +{ + u8 t2, t2i, t0; + u32 val32; + struct ide_timing *t; + + /* PIO Data Setup */ + t0 = (cycletime + ide_palm_clk - 1) / ide_palm_clk; + t2 = (ide_timing_find_mode(XFER_PIO_0 + mode)->active + + ide_palm_clk - 1) / ide_palm_clk; + + t2i = t0 - t2 - 1; + t2 -= 1; + + val32 = readl(base + BK3710_DATSTB) & (0xFF << (dev ? 0 : 8)); + val32 |= (t2 << (dev ? 8 : 0)); + writel(val32, base + BK3710_DATSTB); + + val32 = readl(base + BK3710_DATRCVR) & (0xFF << (dev ? 0 : 8)); + val32 |= (t2i << (dev ? 8 : 0)); + writel(val32, base + BK3710_DATRCVR); + + if (mate && mate->present) { + u8 mode2 = ide_get_best_pio_mode(mate, 255, 4); + + if (mode2 < mode) + mode = mode2; + } + + /* TASKFILE Setup */ + t = ide_timing_find_mode(XFER_PIO_0 + mode); + t0 = (t->cyc8b + ide_palm_clk - 1) / ide_palm_clk; + t2 = (t->act8b + ide_palm_clk - 1) / ide_palm_clk; + + t2i = t0 - t2 - 1; + t2 -= 1; + + val32 = readl(base + BK3710_REGSTB) & (0xFF << (dev ? 0 : 8)); + val32 |= (t2 << (dev ? 8 : 0)); + writel(val32, base + BK3710_REGSTB); + + val32 = readl(base + BK3710_REGRCVR) & (0xFF << (dev ? 0 : 8)); + val32 |= (t2i << (dev ? 8 : 0)); + writel(val32, base + BK3710_REGRCVR); +} + +static void palm_bk3710_set_dma_mode(ide_drive_t *drive, u8 xferspeed) +{ + int is_slave = drive->dn & 1; + void __iomem *base = (void *)drive->hwif->dma_base; + + if (xferspeed >= XFER_UDMA_0) { + palm_bk3710_setudmamode(base, is_slave, + xferspeed - XFER_UDMA_0); + } else { + palm_bk3710_setdmamode(base, is_slave, drive->id->eide_dma_min, + xferspeed); + } +} + +static void palm_bk3710_set_pio_mode(ide_drive_t *drive, u8 pio) +{ + unsigned int cycle_time; + int is_slave = drive->dn & 1; + ide_drive_t *mate; + void __iomem *base = (void *)drive->hwif->dma_base; + + /* + * Obtain the drive PIO data for tuning the Palm Chip registers + */ + cycle_time = ide_pio_cycle_time(drive, pio); + mate = ide_get_paired_drive(drive); + palm_bk3710_setpiomode(base, mate, is_slave, cycle_time, pio); +} + +static void __devinit palm_bk3710_chipinit(void __iomem *base) +{ + /* + * enable the reset_en of ATA controller so that when ata signals + * are brought out, by writing into device config. at that + * time por_n signal should not be 'Z' and have a stable value. + */ + writel(0x0300, base + BK3710_MISCCTL); + + /* wait for some time and deassert the reset of ATA Device. */ + mdelay(100); + + /* Deassert the Reset */ + writel(0x0200, base + BK3710_MISCCTL); + + /* + * Program the IDETIMP Register Value based on the following assumptions + * + * (ATA_IDETIMP_IDEEN , ENABLE ) | + * (ATA_IDETIMP_SLVTIMEN , DISABLE) | + * (ATA_IDETIMP_RDYSMPL , 70NS) | + * (ATA_IDETIMP_RDYRCVRY , 50NS) | + * (ATA_IDETIMP_DMAFTIM1 , PIOCOMP) | + * (ATA_IDETIMP_PREPOST1 , DISABLE) | + * (ATA_IDETIMP_RDYSEN1 , DISABLE) | + * (ATA_IDETIMP_PIOFTIM1 , DISABLE) | + * (ATA_IDETIMP_DMAFTIM0 , PIOCOMP) | + * (ATA_IDETIMP_PREPOST0 , DISABLE) | + * (ATA_IDETIMP_RDYSEN0 , DISABLE) | + * (ATA_IDETIMP_PIOFTIM0 , DISABLE) + */ + writew(0xB388, base + BK3710_IDETIMP); + + /* + * Configure SIDETIM Register + * (ATA_SIDETIM_RDYSMPS1 ,120NS ) | + * (ATA_SIDETIM_RDYRCYS1 ,120NS ) + */ + writeb(0, base + BK3710_SIDETIM); + + /* + * UDMACTL Ultra-ATA DMA Control + * (ATA_UDMACTL_UDMAP1 , 0 ) | + * (ATA_UDMACTL_UDMAP0 , 0 ) + * + */ + writew(0, base + BK3710_UDMACTL); + + /* + * MISCCTL Miscellaneous Conrol Register + * (ATA_MISCCTL_RSTMODEP , 1) | + * (ATA_MISCCTL_RESETP , 0) | + * (ATA_MISCCTL_TIMORIDE , 1) + */ + writel(0x201, base + BK3710_MISCCTL); + + /* + * IORDYTMP IORDY Timer for Primary Register + * (ATA_IORDYTMP_IORDYTMP , 0xffff ) + */ + writel(0xFFFF, base + BK3710_IORDYTMP); + + /* + * Configure BMISP Register + * (ATA_BMISP_DMAEN1 , DISABLE ) | + * (ATA_BMISP_DMAEN0 , DISABLE ) | + * (ATA_BMISP_IORDYINT , CLEAR) | + * (ATA_BMISP_INTRSTAT , CLEAR) | + * (ATA_BMISP_DMAERROR , CLEAR) + */ + writew(0, base + BK3710_BMISP); + + palm_bk3710_setpiomode(base, NULL, 0, 600, 0); + palm_bk3710_setpiomode(base, NULL, 1, 600, 0); +} +static int __devinit palm_bk3710_probe(struct platform_device *pdev) +{ + hw_regs_t ide_ctlr_info; + int index = 0; + int pribase; + struct clk *clkp; + struct resource *mem, *irq; + ide_hwif_t *hwif; + void __iomem *base; + + clkp = clk_get(NULL, "IDECLK"); + if (IS_ERR(clkp)) + return -ENODEV; + + ideclkp = clkp; + clk_enable(ideclkp); + ide_palm_clk = clk_get_rate(ideclkp)/100000; + ide_palm_clk = (10000/ide_palm_clk) + 1; + /* Register the IDE interface with Linux ATA Interface */ + memset(&ide_ctlr_info, 0, sizeof(ide_ctlr_info)); + + mem = platform_get_resource(pdev, IORESOURCE_MEM, 0); + if (mem == NULL) { + printk(KERN_ERR "failed to get memory region resource\n"); + return -ENODEV; + } + irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0); + if (irq == NULL) { + printk(KERN_ERR "failed to get IRQ resource\n"); + return -ENODEV; + } + + base = (void *)mem->start; + + /* Configure the Palm Chip controller */ + palm_bk3710_chipinit(base); + + pribase = mem->start + IDE_PALM_ATA_PRI_REG_OFFSET; + for (index = 0; index < IDE_NR_PORTS - 2; index++) + ide_ctlr_info.io_ports[index] = pribase + index; + ide_ctlr_info.io_ports[IDE_CONTROL_OFFSET] = mem->start + + IDE_PALM_ATA_PRI_CTL_OFFSET; + ide_ctlr_info.irq = irq->start; + ide_ctlr_info.chipset = ide_palm3710; + + if (ide_register_hw(&ide_ctlr_info, NULL, &hwif) < 0) { + printk(KERN_WARNING "Palm Chip BK3710 IDE Register Fail\n"); + return -ENODEV; + } + + hwif->set_pio_mode = &palm_bk3710_set_pio_mode; + hwif->set_dma_mode = &palm_bk3710_set_dma_mode; + hwif->mmio = 1; + default_hwif_mmiops(hwif); + hwif->cbl = ATA_CBL_PATA80; + hwif->ultra_mask = 0x1f; /* Ultra DMA Mode 4 Max + (input clk 99MHz) */ + hwif->mwdma_mask = 0x7; + hwif->drives[0].autotune = 1; + hwif->drives[1].autotune = 1; + + ide_setup_dma(hwif, mem->start); + + return 0; +} + +static struct platform_driver platform_bk_driver = { + .driver = { + .name = "palm_bk3710", + }, + .probe = palm_bk3710_probe, + .remove = NULL, +}; + +static int __init palm_bk3710_init(void) +{ + return platform_driver_register(&platform_bk_driver); +} + +module_init(palm_bk3710_init); +MODULE_LICENSE("GPL"); + diff --git a/drivers/ide/cris/ide-cris.c b/drivers/ide/cris/ide-cris.c index 00587a8c2ba..e79bf8f9b7d 100644 --- a/drivers/ide/cris/ide-cris.c +++ b/drivers/ide/cris/ide-cris.c @@ -753,6 +753,25 @@ static void cris_set_dma_mode(ide_drive_t *drive, const u8 speed) cris_ide_set_speed(TYPE_DMA, 0, strobe, hold); } +static void __init cris_setup_ports(hw_regs_t *hw, unsigned long base) +{ + int i; + + memset(hw, 0, sizeof(*hw)); + + for (i = 0; i <= 7; i++) + hw->io_ports[i] = base + cris_ide_reg_addr(i, 0, 1); + + /* + * the IDE control register is at ATA address 6, + * with CS1 active instead of CS0 + */ + hw->io_ports[IDE_CONTROL_OFFSET] = base + cris_ide_reg_addr(6, 1, 0); + + hw->irq = ide_default_irq(0); + hw->ack_intr = cris_ide_ack_intr; +} + static const struct ide_port_info cris_port_info __initdata = { .chipset = ide_etrax100, .host_flags = IDE_HFLAG_NO_ATAPI_DMA | @@ -765,24 +784,16 @@ static const struct ide_port_info cris_port_info __initdata = { static int __init init_e100_ide(void) { hw_regs_t hw; - int ide_offsets[IDE_NR_PORTS], h, i; + int h; u8 idx[4] = { 0xff, 0xff, 0xff, 0xff }; printk("ide: ETRAX FS built-in ATA DMA controller\n"); - for (i = IDE_DATA_OFFSET; i <= IDE_STATUS_OFFSET; i++) - ide_offsets[i] = cris_ide_reg_addr(i, 0, 1); - - /* the IDE control register is at ATA address 6, with CS1 active instead of CS0 */ - ide_offsets[IDE_CONTROL_OFFSET] = cris_ide_reg_addr(6, 1, 0); - for (h = 0; h < 4; h++) { ide_hwif_t *hwif = NULL; - ide_setup_ports(&hw, cris_ide_base_address(h), - ide_offsets, - 0, 0, cris_ide_ack_intr, - ide_default_irq(0)); + cris_setup_ports(&hw, cris_ide_base_address(h)); + hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); if (hwif == NULL) continue; diff --git a/drivers/ide/ide-acpi.c b/drivers/ide/ide-acpi.c index 25aaeae1e83..e07b189f3ec 100644 --- a/drivers/ide/ide-acpi.c +++ b/drivers/ide/ide-acpi.c @@ -171,7 +171,7 @@ err: static acpi_handle ide_acpi_hwif_get_handle(ide_hwif_t *hwif) { struct device *dev = hwif->gendev.parent; - acpi_handle dev_handle; + acpi_handle uninitialized_var(dev_handle); acpi_integer pcidevfn; acpi_handle chan_handle; int err; diff --git a/drivers/ide/ide-cd.c b/drivers/ide/ide-cd.c index ee4d458e2bb..5e42c19a03e 100644 --- a/drivers/ide/ide-cd.c +++ b/drivers/ide/ide-cd.c @@ -295,7 +295,8 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) int stat, err, sense_key; /* Check for errors. */ - stat = HWIF(drive)->INB(IDE_STATUS_REG); + stat = ide_read_status(drive); + if (stat_ret) *stat_ret = stat; @@ -303,7 +304,7 @@ static int cdrom_decode_status(ide_drive_t *drive, int good_stat, int *stat_ret) return 0; /* Get the IDE error register. */ - err = HWIF(drive)->INB(IDE_ERROR_REG); + err = ide_read_error(drive); sense_key = err >> 4; if (rq == NULL) { @@ -692,7 +693,7 @@ int ide_cd_check_ireason(ide_drive_t *drive, int len, int ireason, int rw) /* Some drives (ASUS) seem to tell us that status * info is available. just get it and ignore. */ - (void) HWIF(drive)->INB(IDE_STATUS_REG); + (void)ide_read_status(drive); return 0; } else { /* Drive wants a command packet, or invalid ireason... */ @@ -1326,7 +1327,7 @@ ide_do_rw_cdrom (ide_drive_t *drive, struct request *rq, sector_t block) if (blk_fs_request(rq)) { if (info->cd_flags & IDE_CD_FLAG_SEEKING) { unsigned long elapsed = jiffies - info->start_seek; - int stat = HWIF(drive)->INB(IDE_STATUS_REG); + int stat = ide_read_status(drive); if ((stat & SEEK_STAT) != SEEK_STAT) { if (elapsed < IDECD_SEEK_TIMEOUT) { diff --git a/drivers/ide/ide-dma.c b/drivers/ide/ide-dma.c index 3cf59f2c392..a4bb32883c6 100644 --- a/drivers/ide/ide-dma.c +++ b/drivers/ide/ide-dma.c @@ -147,7 +147,8 @@ ide_startstop_t ide_dma_intr (ide_drive_t *drive) u8 stat = 0, dma_stat = 0; dma_stat = HWIF(drive)->ide_dma_end(drive); - stat = HWIF(drive)->INB(IDE_STATUS_REG); /* get drive status */ + stat = ide_read_status(drive); + if (OK_STAT(stat,DRIVE_READY,drive->bad_wstat|DRQ_STAT)) { if (!dma_stat) { struct request *rq = HWGROUP(drive)->rq; diff --git a/drivers/ide/ide-floppy.c b/drivers/ide/ide-floppy.c index f8fe6ee128f..faf22d716f8 100644 --- a/drivers/ide/ide-floppy.c +++ b/drivers/ide/ide-floppy.c @@ -465,7 +465,7 @@ static void idefloppy_retry_pc(ide_drive_t *drive) idefloppy_pc_t *pc; struct request *rq; - (void)drive->hwif->INB(IDE_ERROR_REG); + (void)ide_read_error(drive); pc = idefloppy_next_pc_storage(drive); rq = idefloppy_next_rq_storage(drive); idefloppy_create_request_sense_cmd(pc); @@ -501,7 +501,7 @@ static ide_startstop_t idefloppy_pc_intr (ide_drive_t *drive) } /* Clear the interrupt */ - stat = drive->hwif->INB(IDE_STATUS_REG); + stat = ide_read_status(drive); /* No more interrupts */ if ((stat & DRQ_STAT) == 0) { @@ -1246,7 +1246,7 @@ static int idefloppy_get_format_progress(ide_drive_t *drive, int __user *arg) u8 stat; local_irq_save(flags); - stat = drive->hwif->INB(IDE_STATUS_REG); + stat = ide_read_status(drive); local_irq_restore(flags); progress_indication = ((stat & SEEK_STAT) == 0) ? 0 : 0x10000; diff --git a/drivers/ide/ide-generic.c b/drivers/ide/ide-generic.c index be469dbbe8f..709b9e4d287 100644 --- a/drivers/ide/ide-generic.c +++ b/drivers/ide/ide-generic.c @@ -20,8 +20,14 @@ static int __init ide_generic_init(void) if (ide_hwifs[0].io_ports[IDE_DATA_OFFSET]) ide_get_lock(NULL, NULL); /* for atari only */ - for (i = 0; i < MAX_HWIFS; i++) - idx[i] = ide_hwifs[i].present ? 0xff : i; + for (i = 0; i < MAX_HWIFS; i++) { + ide_hwif_t *hwif = &ide_hwifs[i]; + + if (hwif->io_ports[IDE_DATA_OFFSET] && !hwif->present) + idx[i] = i; + else + idx[i] = 0xff; + } ide_device_add_all(idx, NULL); diff --git a/drivers/ide/ide-io.c b/drivers/ide/ide-io.c index 4bddef0c0b9..3addbe478d2 100644 --- a/drivers/ide/ide-io.c +++ b/drivers/ide/ide-io.c @@ -466,7 +466,7 @@ static ide_startstop_t ide_ata_error(ide_drive_t *drive, struct request *rq, u8 return ide_stopped; } - if (hwif->INB(IDE_STATUS_REG) & (BUSY_STAT|DRQ_STAT)) + if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT)) rq->errors |= ERROR_RESET; if ((rq->errors & ERROR_RESET) == ERROR_RESET) { @@ -493,7 +493,7 @@ static ide_startstop_t ide_atapi_error(ide_drive_t *drive, struct request *rq, u /* add decoding error stuff */ } - if (hwif->INB(IDE_STATUS_REG) & (BUSY_STAT|DRQ_STAT)) + if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT)) /* force an abort */ hwif->OUTB(WIN_IDLEIMMEDIATE, IDE_COMMAND_REG); @@ -821,9 +821,8 @@ static ide_startstop_t execute_drive_cmd (ide_drive_t *drive, #ifdef DEBUG printk("%s: DRIVE_CMD (null)\n", drive->name); #endif - ide_end_drive_cmd(drive, - hwif->INB(IDE_STATUS_REG), - hwif->INB(IDE_ERROR_REG)); + ide_end_drive_cmd(drive, ide_read_status(drive), ide_read_error(drive)); + return ide_stopped; } @@ -1231,7 +1230,7 @@ static ide_startstop_t ide_dma_timeout_retry(ide_drive_t *drive, int error) printk(KERN_WARNING "%s: DMA timeout error\n", drive->name); (void)HWIF(drive)->ide_dma_end(drive); ret = ide_error(drive, "dma timeout error", - hwif->INB(IDE_STATUS_REG)); + ide_read_status(drive)); } else { printk(KERN_WARNING "%s: DMA timeout retry\n", drive->name); hwif->dma_timeout(drive); @@ -1355,7 +1354,8 @@ void ide_timer_expiry (unsigned long data) startstop = ide_dma_timeout_retry(drive, wait); } else startstop = - ide_error(drive, "irq timeout", hwif->INB(IDE_STATUS_REG)); + ide_error(drive, "irq timeout", + ide_read_status(drive)); } drive->service_time = jiffies - drive->service_start; spin_lock_irq(&ide_lock); diff --git a/drivers/ide/ide-iops.c b/drivers/ide/ide-iops.c index a95178f5e1b..c32e759df20 100644 --- a/drivers/ide/ide-iops.c +++ b/drivers/ide/ide-iops.c @@ -430,10 +430,10 @@ int drive_is_ready (ide_drive_t *drive) * about possible isa-pnp and pci-pnp issues yet. */ if (IDE_CONTROL_REG) - stat = hwif->INB(IDE_ALTSTATUS_REG); + stat = ide_read_altstatus(drive); else /* Note: this may clear a pending IRQ!! */ - stat = hwif->INB(IDE_STATUS_REG); + stat = ide_read_status(drive); if (stat & BUSY_STAT) /* drive busy: definitely not interrupting */ @@ -458,23 +458,24 @@ EXPORT_SYMBOL(drive_is_ready); */ static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long timeout, u8 *rstat) { - ide_hwif_t *hwif = drive->hwif; unsigned long flags; int i; u8 stat; udelay(1); /* spec allows drive 400ns to assert "BUSY" */ - if ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) { + stat = ide_read_status(drive); + + if (stat & BUSY_STAT) { local_irq_set(flags); timeout += jiffies; - while ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) { + while ((stat = ide_read_status(drive)) & BUSY_STAT) { if (time_after(jiffies, timeout)) { /* * One last read after the timeout in case * heavy interrupt load made us not make any * progress during the timeout.. */ - stat = hwif->INB(IDE_STATUS_REG); + stat = ide_read_status(drive); if (!(stat & BUSY_STAT)) break; @@ -494,7 +495,9 @@ static int __ide_wait_stat(ide_drive_t *drive, u8 good, u8 bad, unsigned long ti */ for (i = 0; i < 10; i++) { udelay(1); - if (OK_STAT((stat = hwif->INB(IDE_STATUS_REG)), good, bad)) { + stat = ide_read_status(drive); + + if (OK_STAT(stat, good, bad)) { *rstat = stat; return 0; } @@ -617,6 +620,7 @@ int ide_driveid_update(ide_drive_t *drive) ide_hwif_t *hwif = drive->hwif; struct hd_driveid *id; unsigned long timeout, flags; + u8 stat; /* * Re-read drive->id for possible DMA mode @@ -633,10 +637,15 @@ int ide_driveid_update(ide_drive_t *drive) SELECT_MASK(drive, 0); return 0; /* drive timed-out */ } + msleep(50); /* give drive a breather */ - } while (hwif->INB(IDE_ALTSTATUS_REG) & BUSY_STAT); + stat = ide_read_altstatus(drive); + } while (stat & BUSY_STAT); + msleep(50); /* wait for IRQ and DRQ_STAT */ - if (!OK_STAT(hwif->INB(IDE_STATUS_REG),DRQ_STAT,BAD_R_STAT)) { + stat = ide_read_status(drive); + + if (!OK_STAT(stat, DRQ_STAT, BAD_R_STAT)) { SELECT_MASK(drive, 0); printk("%s: CHECK for good STATUS\n", drive->name); return 0; @@ -649,7 +658,7 @@ int ide_driveid_update(ide_drive_t *drive) return 0; } ata_input_data(drive, id, SECTOR_WORDS); - (void) hwif->INB(IDE_STATUS_REG); /* clear drive IRQ */ + (void)ide_read_status(drive); /* clear drive IRQ */ local_irq_enable(); local_irq_restore(flags); ide_fix_driveid(id); @@ -850,17 +859,16 @@ static ide_startstop_t do_reset1 (ide_drive_t *, int); static ide_startstop_t atapi_reset_pollfunc (ide_drive_t *drive) { ide_hwgroup_t *hwgroup = HWGROUP(drive); - ide_hwif_t *hwif = HWIF(drive); u8 stat; SELECT_DRIVE(drive); udelay (10); + stat = ide_read_status(drive); - if (OK_STAT(stat = hwif->INB(IDE_STATUS_REG), 0, BUSY_STAT)) { + if (OK_STAT(stat, 0, BUSY_STAT)) printk("%s: ATAPI reset complete\n", drive->name); - } else { + else { if (time_before(jiffies, hwgroup->poll_timeout)) { - BUG_ON(HWGROUP(drive)->handler != NULL); ide_set_handler(drive, &atapi_reset_pollfunc, HZ/20, NULL); /* continue polling */ return ide_started; @@ -898,9 +906,10 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) } } - if (!OK_STAT(tmp = hwif->INB(IDE_STATUS_REG), 0, BUSY_STAT)) { + tmp = ide_read_status(drive); + + if (!OK_STAT(tmp, 0, BUSY_STAT)) { if (time_before(jiffies, hwgroup->poll_timeout)) { - BUG_ON(HWGROUP(drive)->handler != NULL); ide_set_handler(drive, &reset_pollfunc, HZ/20, NULL); /* continue polling */ return ide_started; @@ -909,7 +918,9 @@ static ide_startstop_t reset_pollfunc (ide_drive_t *drive) drive->failures++; } else { printk("%s: reset: ", hwif->name); - if ((tmp = hwif->INB(IDE_ERROR_REG)) == 1) { + tmp = ide_read_error(drive); + + if (tmp == 1) { printk("success\n"); drive->failures = 0; } else { diff --git a/drivers/ide/ide-lib.c b/drivers/ide/ide-lib.c index b42940d8bf7..1ff676cc647 100644 --- a/drivers/ide/ide-lib.c +++ b/drivers/ide/ide-lib.c @@ -578,7 +578,7 @@ u8 ide_dump_status(ide_drive_t *drive, const char *msg, u8 stat) } printk("}\n"); if ((stat & (BUSY_STAT|ERR_STAT)) == ERR_STAT) { - err = drive->hwif->INB(IDE_ERROR_REG); + err = ide_read_error(drive); printk("%s: %s: error=0x%02x ", drive->name, msg, err); if (drive->media == ide_disk) ide_dump_ata_error(drive, err); diff --git a/drivers/ide/ide-probe.c b/drivers/ide/ide-probe.c index 9c07bdb68d1..fd0ef826895 100644 --- a/drivers/ide/ide-probe.c +++ b/drivers/ide/ide-probe.c @@ -264,8 +264,7 @@ err_misc: static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) { ide_hwif_t *hwif = HWIF(drive); - int rc; - unsigned long hd_status; + int use_altstatus = 0, rc; unsigned long timeout; u8 s = 0, a = 0; @@ -273,19 +272,17 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) msleep(50); if (IDE_CONTROL_REG) { - a = hwif->INB(IDE_ALTSTATUS_REG); - s = hwif->INB(IDE_STATUS_REG); - if ((a ^ s) & ~INDEX_STAT) { - printk(KERN_INFO "%s: probing with STATUS(0x%02x) instead of " - "ALTSTATUS(0x%02x)\n", drive->name, s, a); + a = ide_read_altstatus(drive); + s = ide_read_status(drive); + if ((a ^ s) & ~INDEX_STAT) /* ancient Seagate drives, broken interfaces */ - hd_status = IDE_STATUS_REG; - } else { + printk(KERN_INFO "%s: probing with STATUS(0x%02x) " + "instead of ALTSTATUS(0x%02x)\n", + drive->name, s, a); + else /* use non-intrusive polling */ - hd_status = IDE_ALTSTATUS_REG; - } - } else - hd_status = IDE_STATUS_REG; + use_altstatus = 1; + } /* set features register for atapi * identify command to be sure of reply @@ -306,11 +303,15 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) } /* give drive a breather */ msleep(50); - } while ((hwif->INB(hd_status)) & BUSY_STAT); + s = use_altstatus ? ide_read_altstatus(drive) + : ide_read_status(drive); + } while (s & BUSY_STAT); /* wait for IRQ and DRQ_STAT */ msleep(50); - if (OK_STAT((hwif->INB(IDE_STATUS_REG)), DRQ_STAT, BAD_R_STAT)) { + s = ide_read_status(drive); + + if (OK_STAT(s, DRQ_STAT, BAD_R_STAT)) { unsigned long flags; /* local CPU only; some systems need this */ @@ -320,7 +321,7 @@ static int actual_try_to_identify (ide_drive_t *drive, u8 cmd) /* drive responded with ID */ rc = 0; /* clear drive IRQ */ - (void) hwif->INB(IDE_STATUS_REG); + (void)ide_read_status(drive); local_irq_restore(flags); } else { /* drive refused ID */ @@ -367,7 +368,7 @@ static int try_to_identify (ide_drive_t *drive, u8 cmd) ide_set_irq(drive, 0); /* clear drive IRQ */ - (void) hwif->INB(IDE_STATUS_REG); + (void)ide_read_status(drive); udelay(5); irq = probe_irq_off(cookie); if (!hwif->irq) { @@ -455,7 +456,9 @@ static int do_probe (ide_drive_t *drive, u8 cmd) return 3; } - if (OK_STAT((hwif->INB(IDE_STATUS_REG)), READY_STAT, BUSY_STAT) || + stat = ide_read_status(drive); + + if (OK_STAT(stat, READY_STAT, BUSY_STAT) || drive->present || cmd == WIN_PIDENTIFY) { /* send cmd and wait */ if ((rc = try_to_identify(drive, cmd))) { @@ -463,7 +466,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) rc = try_to_identify(drive,cmd); } - stat = hwif->INB(IDE_STATUS_REG); + stat = ide_read_status(drive); if (stat == (BUSY_STAT | READY_STAT)) return 4; @@ -482,7 +485,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) } /* ensure drive IRQ is clear */ - stat = hwif->INB(IDE_STATUS_REG); + stat = ide_read_status(drive); if (rc == 1) printk(KERN_ERR "%s: no response (status = 0x%02x)\n", @@ -496,7 +499,7 @@ static int do_probe (ide_drive_t *drive, u8 cmd) SELECT_DRIVE(&hwif->drives[0]); msleep(50); /* ensure drive irq is clear */ - (void) hwif->INB(IDE_STATUS_REG); + (void)ide_read_status(drive); } return rc; } @@ -521,7 +524,7 @@ static void enable_nest (ide_drive_t *drive) msleep(50); - stat = hwif->INB(IDE_STATUS_REG); + stat = ide_read_status(drive); if (!OK_STAT(stat, 0, BAD_STAT)) printk(KERN_CONT "failed (status = 0x%02x)\n", stat); diff --git a/drivers/ide/ide-proc.c b/drivers/ide/ide-proc.c index 975c0ff0f43..bab88ca7f7e 100644 --- a/drivers/ide/ide-proc.c +++ b/drivers/ide/ide-proc.c @@ -65,6 +65,7 @@ static int proc_ide_read_imodel case ide_4drives: name = "4drives"; break; case ide_pmac: name = "mac-io"; break; case ide_au1xxx: name = "au1xxx"; break; + case ide_palm3710: name = "palm3710"; break; case ide_etrax100: name = "etrax100"; break; case ide_acorn: name = "acorn"; break; default: name = "(unknown)"; break; diff --git a/drivers/ide/ide-tape.c b/drivers/ide/ide-tape.c index bf40d8c824a..49dd2e7bae7 100644 --- a/drivers/ide/ide-tape.c +++ b/drivers/ide/ide-tape.c @@ -15,7 +15,7 @@ * Documentation/ide/ChangeLog.ide-tape.1995-2002 */ -#define IDETAPE_VERSION "1.19" +#define IDETAPE_VERSION "1.20" #include <linux/module.h> #include <linux/types.h> @@ -39,63 +39,70 @@ #include <scsi/scsi.h> #include <asm/byteorder.h> -#include <asm/irq.h> -#include <asm/uaccess.h> -#include <asm/io.h> +#include <linux/irq.h> +#include <linux/uaccess.h> +#include <linux/io.h> #include <asm/unaligned.h> #include <linux/mtio.h> +enum { + /* output errors only */ + DBG_ERR = (1 << 0), + /* output all sense key/asc */ + DBG_SENSE = (1 << 1), + /* info regarding all chrdev-related procedures */ + DBG_CHRDEV = (1 << 2), + /* all remaining procedures */ + DBG_PROCS = (1 << 3), + /* buffer alloc info (pc_stack & rq_stack) */ + DBG_PCRQ_STACK = (1 << 4), +}; + +/* define to see debug info */ +#define IDETAPE_DEBUG_LOG 0 + +#if IDETAPE_DEBUG_LOG +#define debug_log(lvl, fmt, args...) \ +{ \ + if (tape->debug_mask & lvl) \ + printk(KERN_INFO "ide-tape: " fmt, ## args); \ +} +#else +#define debug_log(lvl, fmt, args...) do {} while (0) +#endif + /**************************** Tunable parameters *****************************/ /* - * Pipelined mode parameters. + * Pipelined mode parameters. * - * We try to use the minimum number of stages which is enough to - * keep the tape constantly streaming. To accomplish that, we implement - * a feedback loop around the maximum number of stages: + * We try to use the minimum number of stages which is enough to keep the tape + * constantly streaming. To accomplish that, we implement a feedback loop around + * the maximum number of stages: * - * We start from MIN maximum stages (we will not even use MIN stages - * if we don't need them), increment it by RATE*(MAX-MIN) - * whenever we sense that the pipeline is empty, until we reach - * the optimum value or until we reach MAX. + * We start from MIN maximum stages (we will not even use MIN stages if we don't + * need them), increment it by RATE*(MAX-MIN) whenever we sense that the + * pipeline is empty, until we reach the optimum value or until we reach MAX. * - * Setting the following parameter to 0 is illegal: the pipelined mode - * cannot be disabled (calculate_speeds() divides by tape->max_stages.) + * Setting the following parameter to 0 is illegal: the pipelined mode cannot be + * disabled (idetape_calculate_speeds() divides by tape->max_stages.) */ #define IDETAPE_MIN_PIPELINE_STAGES 1 #define IDETAPE_MAX_PIPELINE_STAGES 400 #define IDETAPE_INCREASE_STAGES_RATE 20 /* - * The following are used to debug the driver: - * - * Setting IDETAPE_DEBUG_LOG to 1 will log driver flow control. + * After each failed packet command we issue a request sense command and retry + * the packet command IDETAPE_MAX_PC_RETRIES times. * - * Setting them to 0 will restore normal operation mode: - * - * 1. Disable logging normal successful operations. - * 2. Disable self-sanity checks. - * 3. Errors will still be logged, of course. - * - * All the #if DEBUG code will be removed some day, when the driver - * is verified to be stable enough. This will make it much more - * esthetic. - */ -#define IDETAPE_DEBUG_LOG 0 - -/* - * After each failed packet command we issue a request sense command - * and retry the packet command IDETAPE_MAX_PC_RETRIES times. - * - * Setting IDETAPE_MAX_PC_RETRIES to 0 will disable retries. + * Setting IDETAPE_MAX_PC_RETRIES to 0 will disable retries. */ #define IDETAPE_MAX_PC_RETRIES 3 /* - * With each packet command, we allocate a buffer of - * IDETAPE_PC_BUFFER_SIZE bytes. This is used for several packet - * commands (Not for READ/WRITE commands). + * With each packet command, we allocate a buffer of IDETAPE_PC_BUFFER_SIZE + * bytes. This is used for several packet commands (Not for READ/WRITE commands) */ #define IDETAPE_PC_BUFFER_SIZE 256 @@ -114,48 +121,39 @@ #define IDETAPE_WAIT_CMD (900*HZ) /* - * The following parameter is used to select the point in the internal - * tape fifo in which we will start to refill the buffer. Decreasing - * the following parameter will improve the system's latency and - * interactive response, while using a high value might improve system - * throughput. + * The following parameter is used to select the point in the internal tape fifo + * in which we will start to refill the buffer. Decreasing the following + * parameter will improve the system's latency and interactive response, while + * using a high value might improve system throughput. */ -#define IDETAPE_FIFO_THRESHOLD 2 +#define IDETAPE_FIFO_THRESHOLD 2 /* - * DSC polling parameters. - * - * Polling for DSC (a single bit in the status register) is a very - * important function in ide-tape. There are two cases in which we - * poll for DSC: + * DSC polling parameters. * - * 1. Before a read/write packet command, to ensure that we - * can transfer data from/to the tape's data buffers, without - * causing an actual media access. In case the tape is not - * ready yet, we take out our request from the device - * request queue, so that ide.c will service requests from - * the other device on the same interface meanwhile. + * Polling for DSC (a single bit in the status register) is a very important + * function in ide-tape. There are two cases in which we poll for DSC: * - * 2. After the successful initialization of a "media access - * packet command", which is a command which can take a long - * time to complete (it can be several seconds or even an hour). + * 1. Before a read/write packet command, to ensure that we can transfer data + * from/to the tape's data buffers, without causing an actual media access. + * In case the tape is not ready yet, we take out our request from the device + * request queue, so that ide.c could service requests from the other device + * on the same interface in the meantime. * - * Again, we postpone our request in the middle to free the bus - * for the other device. The polling frequency here should be - * lower than the read/write frequency since those media access - * commands are slow. We start from a "fast" frequency - - * IDETAPE_DSC_MA_FAST (one second), and if we don't receive DSC - * after IDETAPE_DSC_MA_THRESHOLD (5 minutes), we switch it to a - * lower frequency - IDETAPE_DSC_MA_SLOW (1 minute). + * 2. After the successful initialization of a "media access packet command", + * which is a command that can take a long time to complete (the interval can + * range from several seconds to even an hour). Again, we postpone our request + * in the middle to free the bus for the other device. The polling frequency + * here should be lower than the read/write frequency since those media access + * commands are slow. We start from a "fast" frequency - IDETAPE_DSC_MA_FAST + * (1 second), and if we don't receive DSC after IDETAPE_DSC_MA_THRESHOLD + * (5 min), we switch it to a lower frequency - IDETAPE_DSC_MA_SLOW (1 min). * - * We also set a timeout for the timer, in case something goes wrong. - * The timeout should be longer then the maximum execution time of a - * tape operation. - */ - -/* - * DSC timings. + * We also set a timeout for the timer, in case something goes wrong. The + * timeout should be longer then the maximum execution time of a tape operation. */ + +/* DSC timings. */ #define IDETAPE_DSC_RW_MIN 5*HZ/100 /* 50 msec */ #define IDETAPE_DSC_RW_MAX 40*HZ/100 /* 400 msec */ #define IDETAPE_DSC_RW_TIMEOUT 2*60*HZ /* 2 minutes */ @@ -166,19 +164,15 @@ /*************************** End of tunable parameters ***********************/ -/* - * Read/Write error simulation - */ +/* Read/Write error simulation */ #define SIMULATE_ERRORS 0 -/* - * For general magnetic tape device compatibility. - */ -typedef enum { - idetape_direction_none, - idetape_direction_read, - idetape_direction_write -} idetape_chrdev_direction_t; +/* tape directions */ +enum { + IDETAPE_DIR_NONE = (1 << 0), + IDETAPE_DIR_READ = (1 << 1), + IDETAPE_DIR_WRITE = (1 << 2), +}; struct idetape_bh { u32 b_size; @@ -187,24 +181,32 @@ struct idetape_bh { char *b_data; }; -/* - * Our view of a packet command. - */ typedef struct idetape_packet_command_s { - u8 c[12]; /* Actual packet bytes */ - int retries; /* On each retry, we increment retries */ - int error; /* Error code */ - int request_transfer; /* Bytes to transfer */ - int actually_transferred; /* Bytes actually transferred */ - int buffer_size; /* Size of our data buffer */ + /* Actual packet bytes */ + u8 c[12]; + /* On each retry, we increment retries */ + int retries; + /* Error code */ + int error; + /* Bytes to transfer */ + int request_transfer; + /* Bytes actually transferred */ + int actually_transferred; + /* Size of our data buffer */ + int buffer_size; struct idetape_bh *bh; char *b_data; int b_count; - u8 *buffer; /* Data buffer */ - u8 *current_position; /* Pointer into the above buffer */ - ide_startstop_t (*callback) (ide_drive_t *); /* Called when this packet command is completed */ - u8 pc_buffer[IDETAPE_PC_BUFFER_SIZE]; /* Temporary buffer */ - unsigned long flags; /* Status/Action bit flags: long for set_bit */ + /* Data buffer */ + u8 *buffer; + /* Pointer into the above buffer */ + u8 *current_position; + /* Called when this packet command is completed */ + ide_startstop_t (*callback) (ide_drive_t *); + /* Temporary buffer */ + u8 pc_buffer[IDETAPE_PC_BUFFER_SIZE]; + /* Status/Action bit flags: long for set_bit */ + unsigned long flags; } idetape_pc_t; /* @@ -223,9 +225,7 @@ typedef struct idetape_packet_command_s { /* Data direction */ #define PC_WRITING 5 -/* - * A pipeline stage. - */ +/* A pipeline stage. */ typedef struct idetape_stage_s { struct request rq; /* The corresponding request */ struct idetape_bh *bh; /* The data buffers */ @@ -233,9 +233,8 @@ typedef struct idetape_stage_s { } idetape_stage_t; /* - * Most of our global data which we need to save even as we leave the - * driver due to an interrupt or a timer event is stored in a variable - * of type idetape_tape_t, defined below. + * Most of our global data which we need to save even as we leave the driver due + * to an interrupt or a timer event is stored in the struct defined below. */ typedef struct ide_tape_obj { ide_drive_t *drive; @@ -271,15 +270,14 @@ typedef struct ide_tape_obj { int rq_stack_index; /* - * DSC polling variables. + * DSC polling variables. * - * While polling for DSC we use postponed_rq to postpone the - * current request so that ide.c will be able to service - * pending requests on the other device. Note that at most - * we will have only one DSC (usually data transfer) request - * in the device request queue. Additional requests can be - * queued in our internal pipeline, but they will be visible - * to ide.c only one at a time. + * While polling for DSC we use postponed_rq to postpone the current + * request so that ide.c will be able to service pending requests on the + * other device. Note that at most we will have only one DSC (usually + * data transfer) request in the device request queue. Additional + * requests can be queued in our internal pipeline, but they will be + * visible to ide.c only one at a time. */ struct request *postponed_rq; /* The time in which we started polling for DSC */ @@ -287,73 +285,57 @@ typedef struct ide_tape_obj { /* Timer used to poll for dsc */ struct timer_list dsc_timer; /* Read/Write dsc polling frequency */ - unsigned long best_dsc_rw_frequency; - /* The current polling frequency */ - unsigned long dsc_polling_frequency; - /* Maximum waiting time */ + unsigned long best_dsc_rw_freq; + unsigned long dsc_poll_freq; unsigned long dsc_timeout; - /* - * Read position information - */ + /* Read position information */ u8 partition; /* Current block */ - unsigned int first_frame_position; - unsigned int last_frame_position; - unsigned int blocks_in_buffer; + unsigned int first_frame; - /* - * Last error information - */ + /* Last error information */ u8 sense_key, asc, ascq; - /* - * Character device operation - */ + /* Character device operation */ unsigned int minor; /* device name */ char name[4]; /* Current character device data transfer direction */ - idetape_chrdev_direction_t chrdev_direction; + u8 chrdev_dir; - /* - * Device information - */ - /* Usually 512 or 1024 bytes */ - unsigned short tape_block_size; + /* tape block size, usually 512 or 1024 bytes */ + unsigned short blk_size; int user_bs_factor; /* Copy of the tape's Capabilities and Mechanical Page */ u8 caps[20]; /* - * Active data transfer request parameters. - * - * At most, there is only one ide-tape originated data transfer - * request in the device request queue. This allows ide.c to - * easily service requests from the other device when we - * postpone our active request. In the pipelined operation - * mode, we use our internal pipeline structure to hold - * more data requests. + * Active data transfer request parameters. * - * The data buffer size is chosen based on the tape's - * recommendation. + * At most, there is only one ide-tape originated data transfer request + * in the device request queue. This allows ide.c to easily service + * requests from the other device when we postpone our active request. + * In the pipelined operation mode, we use our internal pipeline + * structure to hold more data requests. The data buffer size is chosen + * based on the tape's recommendation. */ - /* Pointer to the request which is waiting in the device request queue */ - struct request *active_data_request; - /* Data buffer size (chosen based on the tape's recommendation */ + /* ptr to the request which is waiting in the device request queue */ + struct request *active_data_rq; + /* Data buffer size chosen based on the tape's recommendation */ int stage_size; idetape_stage_t *merge_stage; int merge_stage_size; struct idetape_bh *bh; char *b_data; int b_count; - + /* - * Pipeline parameters. + * Pipeline parameters. * - * To accomplish non-pipelined mode, we simply set the following - * variables to zero (or NULL, where appropriate). + * To accomplish non-pipelined mode, we simply set the following + * variables to zero (or NULL, where appropriate). */ /* Number of currently used stages */ int nr_stages; @@ -378,20 +360,13 @@ typedef struct ide_tape_obj { /* Status/Action flags: long for set_bit */ unsigned long flags; /* protects the ide-tape queue */ - spinlock_t spinlock; + spinlock_t lock; - /* - * Measures average tape speed - */ + /* Measures average tape speed */ unsigned long avg_time; int avg_size; int avg_speed; - char vendor_id[10]; - char product_id[18]; - char firmware_revision[6]; - int firmware_revision_num; - /* the door is currently locked */ int door_locked; /* the tape hardware is write protected */ @@ -400,11 +375,9 @@ typedef struct ide_tape_obj { char write_prot; /* - * Limit the number of times a request can - * be postponed, to avoid an infinite postpone - * deadlock. + * Limit the number of times a request can be postponed, to avoid an + * infinite postpone deadlock. */ - /* request postpone count limit */ int postpone_cnt; /* @@ -419,30 +392,19 @@ typedef struct ide_tape_obj { int tape_head; int last_tape_head; - /* - * Speed control at the tape buffers input/output - */ + /* Speed control at the tape buffers input/output */ unsigned long insert_time; int insert_size; int insert_speed; int max_insert_speed; int measure_insert_time; - /* - * Measure tape still time, in milliseconds - */ - unsigned long tape_still_time_begin; - int tape_still_time; - - /* - * Speed regulation negative feedback loop - */ + /* Speed regulation negative feedback loop */ int speed_control; int pipeline_head_speed; int controlled_pipeline_head_speed; int uncontrolled_pipeline_head_speed; int controlled_last_pipeline_head; - int uncontrolled_last_pipeline_head; unsigned long uncontrolled_pipeline_head_time; unsigned long controlled_pipeline_head_time; int controlled_previous_pipeline_head; @@ -451,18 +413,7 @@ typedef struct ide_tape_obj { unsigned long uncontrolled_previous_head_time; int restart_speed_control_req; - /* - * Debug_level determines amount of debugging output; - * can be changed using /proc/ide/hdx/settings - * 0 : almost no debugging output - * 1 : 0+output errors only - * 2 : 1+output all sensekey/asc - * 3 : 2+follow all chrdev related procedures - * 4 : 3+follow all procedures - * 5 : 4+include pc_stack rq_stack info - * 6 : 5+USE_COUNT updates - */ - int debug_level; + u32 debug_mask; } idetape_tape_t; static DEFINE_MUTEX(idetape_ref_mutex); @@ -495,9 +446,7 @@ static void ide_tape_put(struct ide_tape_obj *tape) mutex_unlock(&idetape_ref_mutex); } -/* - * Tape door status - */ +/* Tape door status */ #define DOOR_UNLOCKED 0 #define DOOR_LOCKED 1 #define DOOR_EXPLICITLY_LOCKED 2 @@ -517,30 +466,23 @@ static void ide_tape_put(struct ide_tape_obj *tape) /* 0 = no tape is loaded, so we don't rewind after ejecting */ #define IDETAPE_MEDIUM_PRESENT 9 -/* - * Some defines for the READ BUFFER command - */ +/* A define for the READ BUFFER command */ #define IDETAPE_RETRIEVE_FAULTY_BLOCK 6 -/* - * Some defines for the SPACE command - */ +/* Some defines for the SPACE command */ #define IDETAPE_SPACE_OVER_FILEMARK 1 #define IDETAPE_SPACE_TO_EOD 3 -/* - * Some defines for the LOAD UNLOAD command - */ +/* Some defines for the LOAD UNLOAD command */ #define IDETAPE_LU_LOAD_MASK 1 #define IDETAPE_LU_RETENSION_MASK 2 #define IDETAPE_LU_EOT_MASK 4 /* - * Special requests for our block device strategy routine. + * Special requests for our block device strategy routine. * - * In order to service a character device command, we add special - * requests to the tail of our block device request queue and wait - * for their completion. + * In order to service a character device command, we add special requests to + * the tail of our block device request queue and wait for their completion. */ enum { @@ -551,55 +493,20 @@ enum { REQ_IDETAPE_READ_BUFFER = (1 << 4), }; -/* - * Error codes which are returned in rq->errors to the higher part - * of the driver. - */ +/* Error codes returned in rq->errors to the higher part of the driver. */ #define IDETAPE_ERROR_GENERAL 101 #define IDETAPE_ERROR_FILEMARK 102 #define IDETAPE_ERROR_EOD 103 -/* - * The following is used to format the general configuration word of - * the ATAPI IDENTIFY DEVICE command. - */ -struct idetape_id_gcw { - unsigned packet_size :2; /* Packet Size */ - unsigned reserved234 :3; /* Reserved */ - unsigned drq_type :2; /* Command packet DRQ type */ - unsigned removable :1; /* Removable media */ - unsigned device_type :5; /* Device type */ - unsigned reserved13 :1; /* Reserved */ - unsigned protocol :2; /* Protocol type */ -}; - -/* - * READ POSITION packet command - Data Format (From Table 6-57) - */ -typedef struct { - unsigned reserved0_10 :2; /* Reserved */ - unsigned bpu :1; /* Block Position Unknown */ - unsigned reserved0_543 :3; /* Reserved */ - unsigned eop :1; /* End Of Partition */ - unsigned bop :1; /* Beginning Of Partition */ - u8 partition; /* Partition Number */ - u8 reserved2, reserved3; /* Reserved */ - u32 first_block; /* First Block Location */ - u32 last_block; /* Last Block Location (Optional) */ - u8 reserved12; /* Reserved */ - u8 blocks_in_buffer[3]; /* Blocks In Buffer - (Optional) */ - u32 bytes_in_buffer; /* Bytes In Buffer (Optional) */ -} idetape_read_position_result_t; - /* Structures related to the SELECT SENSE / MODE SENSE packet commands. */ #define IDETAPE_BLOCK_DESCRIPTOR 0 #define IDETAPE_CAPABILITIES_PAGE 0x2a /* - * The variables below are used for the character device interface. - * Additional state variables are defined in our ide_drive_t structure. + * The variables below are used for the character device interface. Additional + * state variables are defined in our ide_drive_t structure. */ -static struct ide_tape_obj * idetape_devs[MAX_HWIFS * MAX_DRIVES]; +static struct ide_tape_obj *idetape_devs[MAX_HWIFS * MAX_DRIVES]; #define ide_tape_f(file) ((file)->private_data) @@ -616,23 +523,17 @@ static struct ide_tape_obj *ide_tape_chrdev_get(unsigned int i) } /* - * Function declarations - * - */ -static int idetape_chrdev_release (struct inode *inode, struct file *filp); -static void idetape_write_release (ide_drive_t *drive, unsigned int minor); - -/* * Too bad. The drive wants to send us data which we are not ready to accept. * Just throw it away. */ -static void idetape_discard_data (ide_drive_t *drive, unsigned int bcount) +static void idetape_discard_data(ide_drive_t *drive, unsigned int bcount) { while (bcount--) (void) HWIF(drive)->INB(IDE_DATA_REG); } -static void idetape_input_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigned int bcount) +static void idetape_input_buffers(ide_drive_t *drive, idetape_pc_t *pc, + unsigned int bcount) { struct idetape_bh *bh = pc->bh; int count; @@ -644,8 +545,11 @@ static void idetape_input_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigne idetape_discard_data(drive, bcount); return; } - count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), bcount); - HWIF(drive)->atapi_input_bytes(drive, bh->b_data + atomic_read(&bh->b_count), count); + count = min( + (unsigned int)(bh->b_size - atomic_read(&bh->b_count)), + bcount); + HWIF(drive)->atapi_input_bytes(drive, bh->b_data + + atomic_read(&bh->b_count), count); bcount -= count; atomic_add(count, &bh->b_count); if (atomic_read(&bh->b_count) == bh->b_size) { @@ -657,15 +561,16 @@ static void idetape_input_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigne pc->bh = bh; } -static void idetape_output_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsigned int bcount) +static void idetape_output_buffers(ide_drive_t *drive, idetape_pc_t *pc, + unsigned int bcount) { struct idetape_bh *bh = pc->bh; int count; while (bcount) { if (bh == NULL) { - printk(KERN_ERR "ide-tape: bh == NULL in " - "idetape_output_buffers\n"); + printk(KERN_ERR "ide-tape: bh == NULL in %s\n", + __func__); return; } count = min((unsigned int)pc->b_count, (unsigned int)bcount); @@ -674,7 +579,8 @@ static void idetape_output_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsign pc->b_data += count; pc->b_count -= count; if (!pc->b_count) { - pc->bh = bh = bh->b_reqnext; + bh = bh->b_reqnext; + pc->bh = bh; if (bh) { pc->b_data = bh->b_data; pc->b_count = atomic_read(&bh->b_count); @@ -683,7 +589,7 @@ static void idetape_output_buffers (ide_drive_t *drive, idetape_pc_t *pc, unsign } } -static void idetape_update_buffers (idetape_pc_t *pc) +static void idetape_update_buffers(idetape_pc_t *pc) { struct idetape_bh *bh = pc->bh; int count; @@ -693,8 +599,8 @@ static void idetape_update_buffers (idetape_pc_t *pc) return; while (bcount) { if (bh == NULL) { - printk(KERN_ERR "ide-tape: bh == NULL in " - "idetape_update_buffers\n"); + printk(KERN_ERR "ide-tape: bh == NULL in %s\n", + __func__); return; } count = min((unsigned int)bh->b_size, (unsigned int)bcount); @@ -712,17 +618,14 @@ static void idetape_update_buffers (idetape_pc_t *pc) * driver. A storage space for a maximum of IDETAPE_PC_STACK packet * commands is allocated at initialization time. */ -static idetape_pc_t *idetape_next_pc_storage (ide_drive_t *drive) +static idetape_pc_t *idetape_next_pc_storage(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 5) - printk(KERN_INFO "ide-tape: pc_stack_index=%d\n", - tape->pc_stack_index); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PCRQ_STACK, "pc_stack_index=%d\n", tape->pc_stack_index); + if (tape->pc_stack_index == IDETAPE_PC_STACK) - tape->pc_stack_index=0; + tape->pc_stack_index = 0; return (&tape->pc_stack[tape->pc_stack_index++]); } @@ -731,32 +634,26 @@ static idetape_pc_t *idetape_next_pc_storage (ide_drive_t *drive) * Since we queue packet commands in the request queue, we need to * allocate a request, along with the allocation of a packet command. */ - + /************************************************************** * * * This should get fixed to use kmalloc(.., GFP_ATOMIC) * * followed later on by kfree(). -ml * * * **************************************************************/ - -static struct request *idetape_next_rq_storage (ide_drive_t *drive) + +static struct request *idetape_next_rq_storage(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 5) - printk(KERN_INFO "ide-tape: rq_stack_index=%d\n", - tape->rq_stack_index); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PCRQ_STACK, "rq_stack_index=%d\n", tape->rq_stack_index); + if (tape->rq_stack_index == IDETAPE_PC_STACK) - tape->rq_stack_index=0; + tape->rq_stack_index = 0; return (&tape->rq_stack[tape->rq_stack_index++]); } -/* - * idetape_init_pc initializes a packet command. - */ -static void idetape_init_pc (idetape_pc_t *pc) +static void idetape_init_pc(idetape_pc_t *pc) { memset(pc->c, 0, 12); pc->retries = 0; @@ -780,22 +677,14 @@ static void idetape_analyze_error(ide_drive_t *drive, u8 *sense) tape->sense_key = sense[2] & 0xF; tape->asc = sense[12]; tape->ascq = sense[13]; -#if IDETAPE_DEBUG_LOG - /* - * Without debugging, we only log an error if we decided to give up - * retrying. - */ - if (tape->debug_level >= 1) - printk(KERN_INFO "ide-tape: pc = %x, sense key = %x, " - "asc = %x, ascq = %x\n", - pc->c[0], tape->sense_key, - tape->asc, tape->ascq); -#endif /* IDETAPE_DEBUG_LOG */ + + debug_log(DBG_ERR, "pc = %x, sense key = %x, asc = %x, ascq = %x\n", + pc->c[0], tape->sense_key, tape->asc, tape->ascq); /* Correct pc->actually_transferred by asking the tape. */ if (test_bit(PC_DMA_ERROR, &pc->flags)) { pc->actually_transferred = pc->request_transfer - - tape->tape_block_size * + tape->blk_size * be32_to_cpu(get_unaligned((u32 *)&sense[3])); idetape_update_buffers(pc); } @@ -843,50 +732,24 @@ static void idetape_activate_next_stage(ide_drive_t *drive) idetape_stage_t *stage = tape->next_stage; struct request *rq = &stage->rq; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_active_next_stage\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PROCS, "Enter %s\n", __func__); + if (stage == NULL) { - printk(KERN_ERR "ide-tape: bug: Trying to activate a non existing stage\n"); + printk(KERN_ERR "ide-tape: bug: Trying to activate a non" + " existing stage\n"); return; } rq->rq_disk = tape->disk; rq->buffer = NULL; rq->special = (void *)stage->bh; - tape->active_data_request = rq; + tape->active_data_rq = rq; tape->active_stage = stage; tape->next_stage = stage->next; } -/* - * idetape_increase_max_pipeline_stages is a part of the feedback - * loop which tries to find the optimum number of stages. In the - * feedback loop, we are starting from a minimum maximum number of - * stages, and if we sense that the pipeline is empty, we try to - * increase it, until we reach the user compile time memory limit. - */ -static void idetape_increase_max_pipeline_stages (ide_drive_t *drive) -{ - idetape_tape_t *tape = drive->driver_data; - int increase = (tape->max_pipeline - tape->min_pipeline) / 10; - -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk (KERN_INFO "ide-tape: Reached idetape_increase_max_pipeline_stages\n"); -#endif /* IDETAPE_DEBUG_LOG */ - - tape->max_stages += max(increase, 1); - tape->max_stages = max(tape->max_stages, tape->min_pipeline); - tape->max_stages = min(tape->max_stages, tape->max_pipeline); -} - -/* - * idetape_kfree_stage calls kfree to completely free a stage, along with - * its related buffers. - */ -static void __idetape_kfree_stage (idetape_stage_t *stage) +/* Free a stage along with its related buffers completely. */ +static void __idetape_kfree_stage(idetape_stage_t *stage) { struct idetape_bh *prev_bh, *bh = stage->bh; int size; @@ -907,30 +770,29 @@ static void __idetape_kfree_stage (idetape_stage_t *stage) kfree(stage); } -static void idetape_kfree_stage (idetape_tape_t *tape, idetape_stage_t *stage) +static void idetape_kfree_stage(idetape_tape_t *tape, idetape_stage_t *stage) { __idetape_kfree_stage(stage); } /* - * idetape_remove_stage_head removes tape->first_stage from the pipeline. - * The caller should avoid race conditions. + * Remove tape->first_stage from the pipeline. The caller should avoid race + * conditions. */ -static void idetape_remove_stage_head (ide_drive_t *drive) +static void idetape_remove_stage_head(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; idetape_stage_t *stage; - -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_remove_stage_head\n"); -#endif /* IDETAPE_DEBUG_LOG */ + + debug_log(DBG_PROCS, "Enter %s\n", __func__); + if (tape->first_stage == NULL) { printk(KERN_ERR "ide-tape: bug: tape->first_stage is NULL\n"); return; } if (tape->active_stage == tape->first_stage) { - printk(KERN_ERR "ide-tape: bug: Trying to free our active pipeline stage\n"); + printk(KERN_ERR "ide-tape: bug: Trying to free our active " + "pipeline stage\n"); return; } stage = tape->first_stage; @@ -940,9 +802,11 @@ static void idetape_remove_stage_head (ide_drive_t *drive) if (tape->first_stage == NULL) { tape->last_stage = NULL; if (tape->next_stage != NULL) - printk(KERN_ERR "ide-tape: bug: tape->next_stage != NULL\n"); + printk(KERN_ERR "ide-tape: bug: tape->next_stage !=" + " NULL\n"); if (tape->nr_stages) - printk(KERN_ERR "ide-tape: bug: nr_stages should be 0 now\n"); + printk(KERN_ERR "ide-tape: bug: nr_stages should be 0 " + "now\n"); } } @@ -957,10 +821,8 @@ static void idetape_abort_pipeline(ide_drive_t *drive, idetape_stage_t *stage = new_last_stage->next; idetape_stage_t *nstage; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: %s: idetape_abort_pipeline called\n", tape->name); -#endif + debug_log(DBG_PROCS, "%s: Enter %s\n", tape->name, __func__); + while (stage) { nstage = stage->next; idetape_kfree_stage(tape, stage); @@ -975,8 +837,8 @@ static void idetape_abort_pipeline(ide_drive_t *drive, } /* - * idetape_end_request is used to finish servicing a request, and to - * insert a pending pipeline request into the main device queue. + * Finish servicing a request and insert a pending pipeline request into the + * main device queue. */ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) { @@ -987,15 +849,12 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) int remove_stage = 0; idetape_stage_t *active_stage; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_end_request\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PROCS, "Enter %s\n", __func__); switch (uptodate) { - case 0: error = IDETAPE_ERROR_GENERAL; break; - case 1: error = 0; break; - default: error = uptodate; + case 0: error = IDETAPE_ERROR_GENERAL; break; + case 1: error = 0; break; + default: error = uptodate; } rq->errors = error; if (error) @@ -1006,20 +865,21 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) return 0; } - spin_lock_irqsave(&tape->spinlock, flags); + spin_lock_irqsave(&tape->lock, flags); /* The request was a pipelined data transfer request */ - if (tape->active_data_request == rq) { + if (tape->active_data_rq == rq) { active_stage = tape->active_stage; tape->active_stage = NULL; - tape->active_data_request = NULL; + tape->active_data_rq = NULL; tape->nr_pending_stages--; if (rq->cmd[0] & REQ_IDETAPE_WRITE) { remove_stage = 1; if (error) { set_bit(IDETAPE_PIPELINE_ERROR, &tape->flags); if (error == IDETAPE_ERROR_EOD) - idetape_abort_pipeline(drive, active_stage); + idetape_abort_pipeline(drive, + active_stage); } } else if (rq->cmd[0] & REQ_IDETAPE_READ) { if (error == IDETAPE_ERROR_EOD) { @@ -1030,48 +890,57 @@ static int idetape_end_request(ide_drive_t *drive, int uptodate, int nr_sects) if (tape->next_stage != NULL) { idetape_activate_next_stage(drive); + /* Insert the next request into the request queue. */ + (void)ide_do_drive_cmd(drive, tape->active_data_rq, + ide_end); + } else if (!error) { /* - * Insert the next request into the request queue. + * This is a part of the feedback loop which tries to + * find the optimum number of stages. We are starting + * from a minimum maximum number of stages, and if we + * sense that the pipeline is empty, we try to increase + * it, until we reach the user compile time memory + * limit. */ - (void) ide_do_drive_cmd(drive, tape->active_data_request, ide_end); - } else if (!error) { - idetape_increase_max_pipeline_stages(drive); + int i = (tape->max_pipeline - tape->min_pipeline) / 10; + + tape->max_stages += max(i, 1); + tape->max_stages = max(tape->max_stages, + tape->min_pipeline); + tape->max_stages = min(tape->max_stages, + tape->max_pipeline); } } ide_end_drive_cmd(drive, 0, 0); -// blkdev_dequeue_request(rq); -// drive->rq = NULL; -// end_that_request_last(rq); if (remove_stage) idetape_remove_stage_head(drive); - if (tape->active_data_request == NULL) + if (tape->active_data_rq == NULL) clear_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags); - spin_unlock_irqrestore(&tape->spinlock, flags); + spin_unlock_irqrestore(&tape->lock, flags); return 0; } -static ide_startstop_t idetape_request_sense_callback (ide_drive_t *drive) +static ide_startstop_t idetape_request_sense_callback(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_request_sense_callback\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PROCS, "Enter %s\n", __func__); + if (!tape->pc->error) { idetape_analyze_error(drive, tape->pc->buffer); idetape_end_request(drive, 1, 0); } else { - printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - Aborting request!\n"); + printk(KERN_ERR "ide-tape: Error in REQUEST SENSE itself - " + "Aborting request!\n"); idetape_end_request(drive, 0, 0); } return ide_stopped; } -static void idetape_create_request_sense_cmd (idetape_pc_t *pc) +static void idetape_create_request_sense_cmd(idetape_pc_t *pc) { - idetape_init_pc(pc); + idetape_init_pc(pc); pc->c[0] = REQUEST_SENSE; pc->c[4] = 20; pc->request_transfer = 20; @@ -1086,25 +955,22 @@ static void idetape_init_rq(struct request *rq, u8 cmd) } /* - * idetape_queue_pc_head generates a new packet command request in front - * of the request queue, before the current request, so that it will be - * processed immediately, on the next pass through the driver. - * - * idetape_queue_pc_head is called from the request handling part of - * the driver (the "bottom" part). Safe storage for the request should - * be allocated with idetape_next_pc_storage and idetape_next_rq_storage - * before calling idetape_queue_pc_head. + * Generate a new packet command request in front of the request queue, before + * the current request, so that it will be processed immediately, on the next + * pass through the driver. The function below is called from the request + * handling part of the driver (the "bottom" part). Safe storage for the request + * should be allocated with ide_tape_next_{pc,rq}_storage() prior to that. * - * Memory for those requests is pre-allocated at initialization time, and - * is limited to IDETAPE_PC_STACK requests. We assume that we have enough - * space for the maximum possible number of inter-dependent packet commands. + * Memory for those requests is pre-allocated at initialization time, and is + * limited to IDETAPE_PC_STACK requests. We assume that we have enough space for + * the maximum possible number of inter-dependent packet commands. * - * The higher level of the driver - The ioctl handler and the character - * device handling functions should queue request to the lower level part - * and wait for their completion using idetape_queue_pc_tail or - * idetape_queue_rw_tail. + * The higher level of the driver - The ioctl handler and the character device + * handling functions should queue request to the lower level part and wait for + * their completion using idetape_queue_pc_tail or idetape_queue_rw_tail. */ -static void idetape_queue_pc_head (ide_drive_t *drive, idetape_pc_t *pc,struct request *rq) +static void idetape_queue_pc_head(ide_drive_t *drive, idetape_pc_t *pc, + struct request *rq) { struct ide_tape_obj *tape = drive->driver_data; @@ -1125,7 +991,7 @@ static ide_startstop_t idetape_retry_pc (ide_drive_t *drive) idetape_pc_t *pc; struct request *rq; - (void)drive->hwif->INB(IDE_ERROR_REG); + (void)ide_read_error(drive); pc = idetape_next_pc_storage(drive); rq = idetape_next_rq_storage(drive); idetape_create_request_sense_cmd(pc); @@ -1135,50 +1001,46 @@ static ide_startstop_t idetape_retry_pc (ide_drive_t *drive) } /* - * idetape_postpone_request postpones the current request so that - * ide.c will be able to service requests from another device on - * the same hwgroup while we are polling for DSC. + * Postpone the current request so that ide.c will be able to service requests + * from another device on the same hwgroup while we are polling for DSC. */ -static void idetape_postpone_request (ide_drive_t *drive) +static void idetape_postpone_request(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: idetape_postpone_request\n"); -#endif + debug_log(DBG_PROCS, "Enter %s\n", __func__); + tape->postponed_rq = HWGROUP(drive)->rq; - ide_stall_queue(drive, tape->dsc_polling_frequency); + ide_stall_queue(drive, tape->dsc_poll_freq); } +typedef void idetape_io_buf(ide_drive_t *, idetape_pc_t *, unsigned int); + /* - * idetape_pc_intr is the usual interrupt handler which will be called - * during a packet command. We will transfer some of the data (as - * requested by the drive) and will re-point interrupt handler to us. - * When data transfer is finished, we will act according to the - * algorithm described before idetape_issue_packet_command. - * + * This is the usual interrupt handler which will be called during a packet + * command. We will transfer some of the data (as requested by the drive) and + * will re-point interrupt handler to us. When data transfer is finished, we + * will act according to the algorithm described before + * idetape_issue_pc. */ -static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) +static ide_startstop_t idetape_pc_intr(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; idetape_pc_t *pc = tape->pc; + xfer_func_t *xferfunc; + idetape_io_buf *iobuf; unsigned int temp; #if SIMULATE_ERRORS - static int error_sim_count = 0; + static int error_sim_count; #endif u16 bcount; u8 stat, ireason; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_pc_intr " - "interrupt handler\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PROCS, "Enter %s - interrupt handler\n", __func__); /* Clear the interrupt */ - stat = hwif->INB(IDE_STATUS_REG); + stat = ide_read_status(drive); if (test_bit(PC_DMA_IN_PROGRESS, &pc->flags)) { if (hwif->ide_dma_end(drive) || (stat & ERR_STAT)) { @@ -1208,20 +1070,16 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) pc->actually_transferred = pc->request_transfer; idetape_update_buffers(pc); } -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: DMA finished\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PROCS, "DMA finished\n"); + } /* No more interrupts */ if ((stat & DRQ_STAT) == 0) { -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: Packet command completed, %d bytes transferred\n", pc->actually_transferred); -#endif /* IDETAPE_DEBUG_LOG */ - clear_bit(PC_DMA_IN_PROGRESS, &pc->flags); + debug_log(DBG_SENSE, "Packet command completed, %d bytes" + " transferred\n", pc->actually_transferred); + clear_bit(PC_DMA_IN_PROGRESS, &pc->flags); local_irq_enable(); #if SIMULATE_ERRORS @@ -1236,19 +1094,16 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) stat &= ~ERR_STAT; if ((stat & ERR_STAT) || test_bit(PC_DMA_ERROR, &pc->flags)) { /* Error detected */ -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 1) - printk(KERN_INFO "ide-tape: %s: I/O error\n", - tape->name); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_ERR, "%s: I/O error\n", tape->name); + if (pc->c[0] == REQUEST_SENSE) { - printk(KERN_ERR "ide-tape: I/O error in request sense command\n"); + printk(KERN_ERR "ide-tape: I/O error in request" + " sense command\n"); return ide_do_reset(drive); } -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 1) - printk(KERN_INFO "ide-tape: [cmd %x]: check condition\n", pc->c[0]); -#endif + debug_log(DBG_ERR, "[cmd %x]: check condition\n", + pc->c[0]); + /* Retry operation */ return idetape_retry_pc(drive); } @@ -1257,7 +1112,7 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) (stat & SEEK_STAT) == 0) { /* Media access command */ tape->dsc_polling_start = jiffies; - tape->dsc_polling_frequency = IDETAPE_DSC_MA_FAST; + tape->dsc_poll_freq = IDETAPE_DSC_MA_FAST; tape->dsc_timeout = jiffies + IDETAPE_DSC_MA_TIMEOUT; /* Allow ide.c to handle other requests */ idetape_postpone_request(drive); @@ -1282,7 +1137,7 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) ireason = hwif->INB(IDE_IREASON_REG); if (ireason & CD) { - printk(KERN_ERR "ide-tape: CoD != 0 in idetape_pc_intr\n"); + printk(KERN_ERR "ide-tape: CoD != 0 in %s\n", __func__); return ide_do_reset(drive); } if (((ireason & IO) == IO) == test_bit(PC_WRITING, &pc->flags)) { @@ -1298,86 +1153,76 @@ static ide_startstop_t idetape_pc_intr (ide_drive_t *drive) temp = pc->actually_transferred + bcount; if (temp > pc->request_transfer) { if (temp > pc->buffer_size) { - printk(KERN_ERR "ide-tape: The tape wants to send us more data than expected - discarding data\n"); + printk(KERN_ERR "ide-tape: The tape wants to " + "send us more data than expected " + "- discarding data\n"); idetape_discard_data(drive, bcount); - ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); + ide_set_handler(drive, &idetape_pc_intr, + IDETAPE_WAIT_CMD, NULL); return ide_started; } -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 2) - printk(KERN_NOTICE "ide-tape: The tape wants to send us more data than expected - allowing transfer\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_SENSE, "The tape wants to send us more " + "data than expected - allowing transfer\n"); } - } - if (test_bit(PC_WRITING, &pc->flags)) { - if (pc->bh != NULL) - idetape_output_buffers(drive, pc, bcount); - else - /* Write the current buffer */ - hwif->atapi_output_bytes(drive, pc->current_position, - bcount); + iobuf = &idetape_input_buffers; + xferfunc = hwif->atapi_input_bytes; } else { - if (pc->bh != NULL) - idetape_input_buffers(drive, pc, bcount); - else - /* Read the current buffer */ - hwif->atapi_input_bytes(drive, pc->current_position, - bcount); + iobuf = &idetape_output_buffers; + xferfunc = hwif->atapi_output_bytes; } + + if (pc->bh) + iobuf(drive, pc, bcount); + else + xferfunc(drive, pc->current_position, bcount); + /* Update the current position */ pc->actually_transferred += bcount; pc->current_position += bcount; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: [cmd %x] transferred %d bytes " - "on that interrupt\n", pc->c[0], bcount); -#endif + + debug_log(DBG_SENSE, "[cmd %x] transferred %d bytes on that intr.\n", + pc->c[0], bcount); + /* And set the interrupt handler again */ ide_set_handler(drive, &idetape_pc_intr, IDETAPE_WAIT_CMD, NULL); return ide_started; } /* - * Packet Command Interface - * - * The current Packet Command is available in tape->pc, and will not - * change until we finish handling it. Each packet command is associated - * with a callback function that will be called when the command is - * finished. + * Packet Command Interface * - * The handling will be done in three stages: + * The current Packet Command is available in tape->pc, and will not change + * until we finish handling it. Each packet command is associated with a + * callback function that will be called when the command is finished. * - * 1. idetape_issue_packet_command will send the packet command to the - * drive, and will set the interrupt handler to idetape_pc_intr. + * The handling will be done in three stages: * - * 2. On each interrupt, idetape_pc_intr will be called. This step - * will be repeated until the device signals us that no more - * interrupts will be issued. + * 1. idetape_issue_pc will send the packet command to the drive, and will set + * the interrupt handler to idetape_pc_intr. * - * 3. ATAPI Tape media access commands have immediate status with a - * delayed process. In case of a successful initiation of a - * media access packet command, the DSC bit will be set when the - * actual execution of the command is finished. - * Since the tape drive will not issue an interrupt, we have to - * poll for this event. In this case, we define the request as - * "low priority request" by setting rq_status to - * IDETAPE_RQ_POSTPONED, set a timer to poll for DSC and exit - * the driver. + * 2. On each interrupt, idetape_pc_intr will be called. This step will be + * repeated until the device signals us that no more interrupts will be issued. * - * ide.c will then give higher priority to requests which - * originate from the other device, until will change rq_status - * to RQ_ACTIVE. + * 3. ATAPI Tape media access commands have immediate status with a delayed + * process. In case of a successful initiation of a media access packet command, + * the DSC bit will be set when the actual execution of the command is finished. + * Since the tape drive will not issue an interrupt, we have to poll for this + * event. In this case, we define the request as "low priority request" by + * setting rq_status to IDETAPE_RQ_POSTPONED, set a timer to poll for DSC and + * exit the driver. * - * 4. When the packet command is finished, it will be checked for errors. + * ide.c will then give higher priority to requests which originate from the + * other device, until will change rq_status to RQ_ACTIVE. * - * 5. In case an error was found, we queue a request sense packet - * command in front of the request queue and retry the operation - * up to IDETAPE_MAX_PC_RETRIES times. + * 4. When the packet command is finished, it will be checked for errors. * - * 6. In case no error was found, or we decided to give up and not - * to retry again, the callback function will be called and then - * we will handle the next request. + * 5. In case an error was found, we queue a request sense packet command in + * front of the request queue and retry the operation up to + * IDETAPE_MAX_PC_RETRIES times. * + * 6. In case no error was found, or we decided to give up and not to retry + * again, the callback function will be called and then we will handle the next + * request. */ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) { @@ -1388,8 +1233,9 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) ide_startstop_t startstop; u8 ireason; - if (ide_wait_stat(&startstop,drive,DRQ_STAT,BUSY_STAT,WAIT_READY)) { - printk(KERN_ERR "ide-tape: Strange, packet command initiated yet DRQ isn't asserted\n"); + if (ide_wait_stat(&startstop, drive, DRQ_STAT, BUSY_STAT, WAIT_READY)) { + printk(KERN_ERR "ide-tape: Strange, packet command initiated " + "yet DRQ isn't asserted\n"); return startstop; } ireason = hwif->INB(IDE_IREASON_REG); @@ -1422,7 +1268,7 @@ static ide_startstop_t idetape_transfer_pc(ide_drive_t *drive) return ide_started; } -static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape_pc_t *pc) +static ide_startstop_t idetape_issue_pc(ide_drive_t *drive, idetape_pc_t *pc) { ide_hwif_t *hwif = drive->hwif; idetape_tape_t *tape = drive->driver_data; @@ -1443,9 +1289,9 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape if (pc->retries > IDETAPE_MAX_PC_RETRIES || test_bit(PC_ABORT, &pc->flags)) { /* - * We will "abort" retrying a packet command in case - * a legitimate error code was received (crossing a - * filemark, or end of the media, for example). + * We will "abort" retrying a packet command in case legitimate + * error code was received (crossing a filemark, or end of the + * media, for example). */ if (!test_bit(PC_ABORT, &pc->flags)) { if (!(pc->c[0] == TEST_UNIT_READY && @@ -1464,10 +1310,7 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape tape->failed_pc = NULL; return pc->callback(drive); } -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: Retry number - %d, cmd = %02X\n", pc->retries, pc->c[0]); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_SENSE, "Retry #%d, cmd = %02X\n", pc->retries, pc->c[0]); pc->retries++; /* We haven't transferred any data yet */ @@ -1499,31 +1342,24 @@ static ide_startstop_t idetape_issue_packet_command (ide_drive_t *drive, idetape } } -/* - * General packet command callback function. - */ -static ide_startstop_t idetape_pc_callback (ide_drive_t *drive) +static ide_startstop_t idetape_pc_callback(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_pc_callback\n"); -#endif /* IDETAPE_DEBUG_LOG */ + + debug_log(DBG_PROCS, "Enter %s\n", __func__); idetape_end_request(drive, tape->pc->error ? 0 : 1, 0); return ide_stopped; } -/* - * A mode sense command is used to "sense" tape parameters. - */ -static void idetape_create_mode_sense_cmd (idetape_pc_t *pc, u8 page_code) +/* A mode sense command is used to "sense" tape parameters. */ +static void idetape_create_mode_sense_cmd(idetape_pc_t *pc, u8 page_code) { idetape_init_pc(pc); pc->c[0] = MODE_SENSE; if (page_code != IDETAPE_BLOCK_DESCRIPTOR) - pc->c[1] = 8; /* DBD = 1 - Don't return block descriptors */ + /* DBD = 1 - Don't return block descriptors */ + pc->c[1] = 8; pc->c[2] = page_code; /* * Changed pc->c[3] to 0 (255 will at best return unused info). @@ -1533,7 +1369,8 @@ static void idetape_create_mode_sense_cmd (idetape_pc_t *pc, u8 page_code) * and return an error when 255 is used. */ pc->c[3] = 0; - pc->c[4] = 255; /* (We will just discard data in that case) */ + /* We will just discard data in that case */ + pc->c[4] = 255; if (page_code == IDETAPE_BLOCK_DESCRIPTOR) pc->request_transfer = 12; else if (page_code == IDETAPE_CAPABILITIES_PAGE) @@ -1543,62 +1380,77 @@ static void idetape_create_mode_sense_cmd (idetape_pc_t *pc, u8 page_code) pc->callback = &idetape_pc_callback; } -static void calculate_speeds(ide_drive_t *drive) +static void idetape_calculate_speeds(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - int full = 125, empty = 75; - if (time_after(jiffies, tape->controlled_pipeline_head_time + 120 * HZ)) { - tape->controlled_previous_pipeline_head = tape->controlled_last_pipeline_head; - tape->controlled_previous_head_time = tape->controlled_pipeline_head_time; + if (time_after(jiffies, + tape->controlled_pipeline_head_time + 120 * HZ)) { + tape->controlled_previous_pipeline_head = + tape->controlled_last_pipeline_head; + tape->controlled_previous_head_time = + tape->controlled_pipeline_head_time; tape->controlled_last_pipeline_head = tape->pipeline_head; tape->controlled_pipeline_head_time = jiffies; } if (time_after(jiffies, tape->controlled_pipeline_head_time + 60 * HZ)) - tape->controlled_pipeline_head_speed = (tape->pipeline_head - tape->controlled_last_pipeline_head) * 32 * HZ / (jiffies - tape->controlled_pipeline_head_time); + tape->controlled_pipeline_head_speed = (tape->pipeline_head - + tape->controlled_last_pipeline_head) * 32 * HZ / + (jiffies - tape->controlled_pipeline_head_time); else if (time_after(jiffies, tape->controlled_previous_head_time)) - tape->controlled_pipeline_head_speed = (tape->pipeline_head - tape->controlled_previous_pipeline_head) * 32 * HZ / (jiffies - tape->controlled_previous_head_time); + tape->controlled_pipeline_head_speed = (tape->pipeline_head - + tape->controlled_previous_pipeline_head) * 32 * + HZ / (jiffies - tape->controlled_previous_head_time); - if (tape->nr_pending_stages < tape->max_stages /*- 1 */) { + if (tape->nr_pending_stages < tape->max_stages/*- 1 */) { /* -1 for read mode error recovery */ - if (time_after(jiffies, tape->uncontrolled_previous_head_time + 10 * HZ)) { + if (time_after(jiffies, tape->uncontrolled_previous_head_time + + 10 * HZ)) { tape->uncontrolled_pipeline_head_time = jiffies; - tape->uncontrolled_pipeline_head_speed = (tape->pipeline_head - tape->uncontrolled_previous_pipeline_head) * 32 * HZ / (jiffies - tape->uncontrolled_previous_head_time); + tape->uncontrolled_pipeline_head_speed = + (tape->pipeline_head - + tape->uncontrolled_previous_pipeline_head) * + 32 * HZ / (jiffies - + tape->uncontrolled_previous_head_time); } } else { tape->uncontrolled_previous_head_time = jiffies; tape->uncontrolled_previous_pipeline_head = tape->pipeline_head; - if (time_after(jiffies, tape->uncontrolled_pipeline_head_time + 30 * HZ)) { + if (time_after(jiffies, tape->uncontrolled_pipeline_head_time + + 30 * HZ)) tape->uncontrolled_pipeline_head_time = jiffies; - } + } - tape->pipeline_head_speed = max(tape->uncontrolled_pipeline_head_speed, tape->controlled_pipeline_head_speed); - if (tape->speed_control == 0) { - tape->max_insert_speed = 5000; - } else if (tape->speed_control == 1) { + tape->pipeline_head_speed = max(tape->uncontrolled_pipeline_head_speed, + tape->controlled_pipeline_head_speed); + + if (tape->speed_control == 1) { if (tape->nr_pending_stages >= tape->max_stages / 2) tape->max_insert_speed = tape->pipeline_head_speed + - (1100 - tape->pipeline_head_speed) * 2 * (tape->nr_pending_stages - tape->max_stages / 2) / tape->max_stages; + (1100 - tape->pipeline_head_speed) * 2 * + (tape->nr_pending_stages - tape->max_stages / 2) + / tape->max_stages; else tape->max_insert_speed = 500 + - (tape->pipeline_head_speed - 500) * 2 * tape->nr_pending_stages / tape->max_stages; + (tape->pipeline_head_speed - 500) * 2 * + tape->nr_pending_stages / tape->max_stages; + if (tape->nr_pending_stages >= tape->max_stages * 99 / 100) tape->max_insert_speed = 5000; - } else if (tape->speed_control == 2) { - tape->max_insert_speed = tape->pipeline_head_speed * empty / 100 + - (tape->pipeline_head_speed * full / 100 - tape->pipeline_head_speed * empty / 100) * tape->nr_pending_stages / tape->max_stages; } else tape->max_insert_speed = tape->speed_control; + tape->max_insert_speed = max(tape->max_insert_speed, 500); } -static ide_startstop_t idetape_media_access_finished (ide_drive_t *drive) +static ide_startstop_t idetape_media_access_finished(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; idetape_pc_t *pc = tape->pc; u8 stat; - stat = drive->hwif->INB(IDE_STATUS_REG); + stat = ide_read_status(drive); + if (stat & SEEK_STAT) { if (stat & ERR_STAT) { /* Error detected */ @@ -1618,14 +1470,14 @@ static ide_startstop_t idetape_media_access_finished (ide_drive_t *drive) return pc->callback(drive); } -static ide_startstop_t idetape_rw_callback (ide_drive_t *drive) +static ide_startstop_t idetape_rw_callback(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; struct request *rq = HWGROUP(drive)->rq; - int blocks = tape->pc->actually_transferred / tape->tape_block_size; + int blocks = tape->pc->actually_transferred / tape->blk_size; - tape->avg_size += blocks * tape->tape_block_size; - tape->insert_size += blocks * tape->tape_block_size; + tape->avg_size += blocks * tape->blk_size; + tape->insert_size += blocks * tape->blk_size; if (tape->insert_size > 1024 * 1024) tape->measure_insert_time = 1; if (tape->measure_insert_time) { @@ -1634,19 +1486,17 @@ static ide_startstop_t idetape_rw_callback (ide_drive_t *drive) tape->insert_size = 0; } if (time_after(jiffies, tape->insert_time)) - tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time); + tape->insert_speed = tape->insert_size / 1024 * HZ / + (jiffies - tape->insert_time); if (time_after_eq(jiffies, tape->avg_time + HZ)) { - tape->avg_speed = tape->avg_size * HZ / (jiffies - tape->avg_time) / 1024; + tape->avg_speed = tape->avg_size * HZ / + (jiffies - tape->avg_time) / 1024; tape->avg_size = 0; tape->avg_time = jiffies; } + debug_log(DBG_PROCS, "Enter %s\n", __func__); -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_rw_callback\n"); -#endif /* IDETAPE_DEBUG_LOG */ - - tape->first_frame_position += blocks; + tape->first_frame += blocks; rq->current_nr_sectors -= blocks; if (!tape->pc->error) @@ -1656,7 +1506,8 @@ static ide_startstop_t idetape_rw_callback (ide_drive_t *drive) return ide_stopped; } -static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh) +static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, + unsigned int length, struct idetape_bh *bh) { idetape_init_pc(pc); pc->c[0] = READ_6; @@ -1666,12 +1517,14 @@ static void idetape_create_read_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsi pc->bh = bh; atomic_set(&bh->b_count, 0); pc->buffer = NULL; - pc->request_transfer = pc->buffer_size = length * tape->tape_block_size; + pc->buffer_size = length * tape->blk_size; + pc->request_transfer = pc->buffer_size; if (pc->request_transfer == tape->stage_size) set_bit(PC_DMA_RECOMMENDED, &pc->flags); } -static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh) +static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, + idetape_pc_t *pc, struct idetape_bh *bh) { int size = 32768; struct idetape_bh *p = bh; @@ -1689,10 +1542,12 @@ static void idetape_create_read_buffer_cmd(idetape_tape_t *tape, idetape_pc_t *p atomic_set(&p->b_count, 0); p = p->b_reqnext; } - pc->request_transfer = pc->buffer_size = size; + pc->request_transfer = size; + pc->buffer_size = size; } -static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, unsigned int length, struct idetape_bh *bh) +static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, + unsigned int length, struct idetape_bh *bh) { idetape_init_pc(pc); pc->c[0] = WRITE_6; @@ -1704,14 +1559,12 @@ static void idetape_create_write_cmd(idetape_tape_t *tape, idetape_pc_t *pc, uns pc->b_data = bh->b_data; pc->b_count = atomic_read(&bh->b_count); pc->buffer = NULL; - pc->request_transfer = pc->buffer_size = length * tape->tape_block_size; + pc->buffer_size = length * tape->blk_size; + pc->request_transfer = pc->buffer_size; if (pc->request_transfer == tape->stage_size) set_bit(PC_DMA_RECOMMENDED, &pc->flags); } -/* - * idetape_do_request is our request handling function. - */ static ide_startstop_t idetape_do_request(ide_drive_t *drive, struct request *rq, sector_t block) { @@ -1720,30 +1573,22 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, struct request *postponed_rq = tape->postponed_rq; u8 stat; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: sector: %ld, " - "nr_sectors: %ld, current_nr_sectors: %d\n", + debug_log(DBG_SENSE, "sector: %ld, nr_sectors: %ld," + " current_nr_sectors: %d\n", rq->sector, rq->nr_sectors, rq->current_nr_sectors); -#endif /* IDETAPE_DEBUG_LOG */ if (!blk_special_request(rq)) { - /* - * We do not support buffer cache originated requests. - */ + /* We do not support buffer cache originated requests. */ printk(KERN_NOTICE "ide-tape: %s: Unsupported request in " "request queue (%d)\n", drive->name, rq->cmd_type); ide_end_request(drive, 0, 0); return ide_stopped; } - /* - * Retry a failed packet command - */ - if (tape->failed_pc != NULL && - tape->pc->c[0] == REQUEST_SENSE) { - return idetape_issue_packet_command(drive, tape->failed_pc); - } + /* Retry a failed packet command */ + if (tape->failed_pc && tape->pc->c[0] == REQUEST_SENSE) + return idetape_issue_pc(drive, tape->failed_pc); + if (postponed_rq != NULL) if (rq != postponed_rq) { printk(KERN_ERR "ide-tape: ide-tape.c bug - " @@ -1758,7 +1603,7 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, * If the tape is still busy, postpone our request and service * the other device meanwhile. */ - stat = drive->hwif->INB(IDE_STATUS_REG); + stat = ide_read_status(drive); if (!drive->dsc_overlap && !(rq->cmd[0] & REQ_IDETAPE_PC2)) set_bit(IDETAPE_IGNORE_DSC, &tape->flags); @@ -1768,16 +1613,15 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, drive->post_reset = 0; } - if (tape->tape_still_time > 100 && tape->tape_still_time < 200) - tape->measure_insert_time = 1; if (time_after(jiffies, tape->insert_time)) - tape->insert_speed = tape->insert_size / 1024 * HZ / (jiffies - tape->insert_time); - calculate_speeds(drive); + tape->insert_speed = tape->insert_size / 1024 * HZ / + (jiffies - tape->insert_time); + idetape_calculate_speeds(drive); if (!test_and_clear_bit(IDETAPE_IGNORE_DSC, &tape->flags) && (stat & SEEK_STAT) == 0) { if (postponed_rq == NULL) { tape->dsc_polling_start = jiffies; - tape->dsc_polling_frequency = tape->best_dsc_rw_frequency; + tape->dsc_poll_freq = tape->best_dsc_rw_freq; tape->dsc_timeout = jiffies + IDETAPE_DSC_RW_TIMEOUT; } else if (time_after(jiffies, tape->dsc_timeout)) { printk(KERN_ERR "ide-tape: %s: DSC timeout\n", @@ -1788,8 +1632,10 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, } else { return ide_do_reset(drive); } - } else if (time_after(jiffies, tape->dsc_polling_start + IDETAPE_DSC_MA_THRESHOLD)) - tape->dsc_polling_frequency = IDETAPE_DSC_MA_SLOW; + } else if (time_after(jiffies, + tape->dsc_polling_start + + IDETAPE_DSC_MA_THRESHOLD)) + tape->dsc_poll_freq = IDETAPE_DSC_MA_SLOW; idetape_postpone_request(drive); return ide_stopped; } @@ -1797,20 +1643,23 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, tape->buffer_head++; tape->postpone_cnt = 0; pc = idetape_next_pc_storage(drive); - idetape_create_read_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special); + idetape_create_read_cmd(tape, pc, rq->current_nr_sectors, + (struct idetape_bh *)rq->special); goto out; } if (rq->cmd[0] & REQ_IDETAPE_WRITE) { tape->buffer_head++; tape->postpone_cnt = 0; pc = idetape_next_pc_storage(drive); - idetape_create_write_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special); + idetape_create_write_cmd(tape, pc, rq->current_nr_sectors, + (struct idetape_bh *)rq->special); goto out; } if (rq->cmd[0] & REQ_IDETAPE_READ_BUFFER) { tape->postpone_cnt = 0; pc = idetape_next_pc_storage(drive); - idetape_create_read_buffer_cmd(tape, pc, rq->current_nr_sectors, (struct idetape_bh *)rq->special); + idetape_create_read_buffer_cmd(tape, pc, + (struct idetape_bh *)rq->special); goto out; } if (rq->cmd[0] & REQ_IDETAPE_PC1) { @@ -1825,49 +1674,51 @@ static ide_startstop_t idetape_do_request(ide_drive_t *drive, } BUG(); out: - return idetape_issue_packet_command(drive, pc); + return idetape_issue_pc(drive, pc); } -/* - * Pipeline related functions - */ -static inline int idetape_pipeline_active (idetape_tape_t *tape) +/* Pipeline related functions */ +static inline int idetape_pipeline_active(idetape_tape_t *tape) { int rc1, rc2; rc1 = test_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags); - rc2 = (tape->active_data_request != NULL); + rc2 = (tape->active_data_rq != NULL); return rc1; } /* - * idetape_kmalloc_stage uses __get_free_page to allocate a pipeline - * stage, along with all the necessary small buffers which together make - * a buffer of size tape->stage_size (or a bit more). We attempt to - * combine sequential pages as much as possible. + * The function below uses __get_free_page to allocate a pipeline stage, along + * with all the necessary small buffers which together make a buffer of size + * tape->stage_size (or a bit more). We attempt to combine sequential pages as + * much as possible. * - * Returns a pointer to the new allocated stage, or NULL if we - * can't (or don't want to) allocate a stage. + * It returns a pointer to the new allocated stage, or NULL if we can't (or + * don't want to) allocate a stage. * - * Pipeline stages are optional and are used to increase performance. - * If we can't allocate them, we'll manage without them. + * Pipeline stages are optional and are used to increase performance. If we + * can't allocate them, we'll manage without them. */ -static idetape_stage_t *__idetape_kmalloc_stage (idetape_tape_t *tape, int full, int clear) +static idetape_stage_t *__idetape_kmalloc_stage(idetape_tape_t *tape, int full, + int clear) { idetape_stage_t *stage; struct idetape_bh *prev_bh, *bh; int pages = tape->pages_per_stage; char *b_data = NULL; - if ((stage = kmalloc(sizeof (idetape_stage_t),GFP_KERNEL)) == NULL) + stage = kmalloc(sizeof(idetape_stage_t), GFP_KERNEL); + if (!stage) return NULL; stage->next = NULL; - bh = stage->bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); + stage->bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); + bh = stage->bh; if (bh == NULL) goto abort; bh->b_reqnext = NULL; - if ((bh->b_data = (char *) __get_free_page (GFP_KERNEL)) == NULL) + bh->b_data = (char *) __get_free_page(GFP_KERNEL); + if (!bh->b_data) goto abort; if (clear) memset(bh->b_data, 0, PAGE_SIZE); @@ -1875,7 +1726,8 @@ static idetape_stage_t *__idetape_kmalloc_stage (idetape_tape_t *tape, int full, atomic_set(&bh->b_count, full ? bh->b_size : 0); while (--pages) { - if ((b_data = (char *) __get_free_page (GFP_KERNEL)) == NULL) + b_data = (char *) __get_free_page(GFP_KERNEL); + if (!b_data) goto abort; if (clear) memset(b_data, 0, PAGE_SIZE); @@ -1893,7 +1745,8 @@ static idetape_stage_t *__idetape_kmalloc_stage (idetape_tape_t *tape, int full, continue; } prev_bh = bh; - if ((bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL)) == NULL) { + bh = kmalloc(sizeof(struct idetape_bh), GFP_KERNEL); + if (!bh) { free_page((unsigned long) b_data); goto abort; } @@ -1912,14 +1765,11 @@ abort: return NULL; } -static idetape_stage_t *idetape_kmalloc_stage (idetape_tape_t *tape) +static idetape_stage_t *idetape_kmalloc_stage(idetape_tape_t *tape) { idetape_stage_t *cache_stage = tape->cache_stage; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_kmalloc_stage\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PROCS, "Enter %s\n", __func__); if (tape->nr_stages >= tape->max_stages) return NULL; @@ -1930,7 +1780,8 @@ static idetape_stage_t *idetape_kmalloc_stage (idetape_tape_t *tape) return __idetape_kmalloc_stage(tape, 0, 0); } -static int idetape_copy_stage_from_user (idetape_tape_t *tape, idetape_stage_t *stage, const char __user *buf, int n) +static int idetape_copy_stage_from_user(idetape_tape_t *tape, + idetape_stage_t *stage, const char __user *buf, int n) { struct idetape_bh *bh = tape->bh; int count; @@ -1938,12 +1789,15 @@ static int idetape_copy_stage_from_user (idetape_tape_t *tape, idetape_stage_t * while (n) { if (bh == NULL) { - printk(KERN_ERR "ide-tape: bh == NULL in " - "idetape_copy_stage_from_user\n"); + printk(KERN_ERR "ide-tape: bh == NULL in %s\n", + __func__); return 1; } - count = min((unsigned int)(bh->b_size - atomic_read(&bh->b_count)), (unsigned int)n); - if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, count)) + count = min((unsigned int) + (bh->b_size - atomic_read(&bh->b_count)), + (unsigned int)n); + if (copy_from_user(bh->b_data + atomic_read(&bh->b_count), buf, + count)) ret = 1; n -= count; atomic_add(count, &bh->b_count); @@ -1958,7 +1812,8 @@ static int idetape_copy_stage_from_user (idetape_tape_t *tape, idetape_stage_t * return ret; } -static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, idetape_stage_t *stage, int n) +static int idetape_copy_stage_to_user(idetape_tape_t *tape, char __user *buf, + idetape_stage_t *stage, int n) { struct idetape_bh *bh = tape->bh; int count; @@ -1966,8 +1821,8 @@ static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, i while (n) { if (bh == NULL) { - printk(KERN_ERR "ide-tape: bh == NULL in " - "idetape_copy_stage_to_user\n"); + printk(KERN_ERR "ide-tape: bh == NULL in %s\n", + __func__); return 1; } count = min(tape->b_count, n); @@ -1978,7 +1833,8 @@ static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, i tape->b_count -= count; buf += count; if (!tape->b_count) { - tape->bh = bh = bh->b_reqnext; + bh = bh->b_reqnext; + tape->bh = bh; if (bh) { tape->b_data = bh->b_data; tape->b_count = atomic_read(&bh->b_count); @@ -1988,12 +1844,12 @@ static int idetape_copy_stage_to_user (idetape_tape_t *tape, char __user *buf, i return ret; } -static void idetape_init_merge_stage (idetape_tape_t *tape) +static void idetape_init_merge_stage(idetape_tape_t *tape) { struct idetape_bh *bh = tape->merge_stage->bh; - + tape->bh = bh; - if (tape->chrdev_direction == idetape_direction_write) + if (tape->chrdev_dir == IDETAPE_DIR_WRITE) atomic_set(&bh->b_count, 0); else { tape->b_data = bh->b_data; @@ -2001,7 +1857,7 @@ static void idetape_init_merge_stage (idetape_tape_t *tape) } } -static void idetape_switch_buffers (idetape_tape_t *tape, idetape_stage_t *stage) +static void idetape_switch_buffers(idetape_tape_t *tape, idetape_stage_t *stage) { struct idetape_bh *tmp; @@ -2011,87 +1867,76 @@ static void idetape_switch_buffers (idetape_tape_t *tape, idetape_stage_t *stage idetape_init_merge_stage(tape); } -/* - * idetape_add_stage_tail adds a new stage at the end of the pipeline. - */ -static void idetape_add_stage_tail (ide_drive_t *drive,idetape_stage_t *stage) +/* Add a new stage at the end of the pipeline. */ +static void idetape_add_stage_tail(ide_drive_t *drive, idetape_stage_t *stage) { idetape_tape_t *tape = drive->driver_data; unsigned long flags; - -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk (KERN_INFO "ide-tape: Reached idetape_add_stage_tail\n"); -#endif /* IDETAPE_DEBUG_LOG */ - spin_lock_irqsave(&tape->spinlock, flags); + + debug_log(DBG_PROCS, "Enter %s\n", __func__); + + spin_lock_irqsave(&tape->lock, flags); stage->next = NULL; if (tape->last_stage != NULL) - tape->last_stage->next=stage; + tape->last_stage->next = stage; else - tape->first_stage = tape->next_stage=stage; + tape->first_stage = stage; + tape->next_stage = stage; tape->last_stage = stage; if (tape->next_stage == NULL) tape->next_stage = tape->last_stage; tape->nr_stages++; tape->nr_pending_stages++; - spin_unlock_irqrestore(&tape->spinlock, flags); + spin_unlock_irqrestore(&tape->lock, flags); } -/* - * idetape_wait_for_request installs a completion in a pending request - * and sleeps until it is serviced. - * - * The caller should ensure that the request will not be serviced - * before we install the completion (usually by disabling interrupts). +/* Install a completion in a pending request and sleep until it is serviced. The + * caller should ensure that the request will not be serviced before we install + * the completion (usually by disabling interrupts). */ -static void idetape_wait_for_request (ide_drive_t *drive, struct request *rq) +static void idetape_wait_for_request(ide_drive_t *drive, struct request *rq) { DECLARE_COMPLETION_ONSTACK(wait); idetape_tape_t *tape = drive->driver_data; if (rq == NULL || !blk_special_request(rq)) { - printk (KERN_ERR "ide-tape: bug: Trying to sleep on non-valid request\n"); + printk(KERN_ERR "ide-tape: bug: Trying to sleep on non-valid" + " request\n"); return; } rq->end_io_data = &wait; rq->end_io = blk_end_sync_rq; - spin_unlock_irq(&tape->spinlock); + spin_unlock_irq(&tape->lock); wait_for_completion(&wait); /* The stage and its struct request have been deallocated */ - spin_lock_irq(&tape->spinlock); + spin_lock_irq(&tape->lock); } -static ide_startstop_t idetape_read_position_callback (ide_drive_t *drive) +static ide_startstop_t idetape_read_position_callback(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; - idetape_read_position_result_t *result; - -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_read_position_callback\n"); -#endif /* IDETAPE_DEBUG_LOG */ + u8 *readpos = tape->pc->buffer; + + debug_log(DBG_PROCS, "Enter %s\n", __func__); if (!tape->pc->error) { - result = (idetape_read_position_result_t *) tape->pc->buffer; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: BOP - %s\n",result->bop ? "Yes":"No"); - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: EOP - %s\n",result->eop ? "Yes":"No"); -#endif /* IDETAPE_DEBUG_LOG */ - if (result->bpu) { - printk(KERN_INFO "ide-tape: Block location is unknown to the tape\n"); + debug_log(DBG_SENSE, "BOP - %s\n", + (readpos[0] & 0x80) ? "Yes" : "No"); + debug_log(DBG_SENSE, "EOP - %s\n", + (readpos[0] & 0x40) ? "Yes" : "No"); + + if (readpos[0] & 0x4) { + printk(KERN_INFO "ide-tape: Block location is unknown" + "to the tape\n"); clear_bit(IDETAPE_ADDRESS_VALID, &tape->flags); idetape_end_request(drive, 0, 0); } else { -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: Block Location - %u\n", ntohl(result->first_block)); -#endif /* IDETAPE_DEBUG_LOG */ - tape->partition = result->partition; - tape->first_frame_position = ntohl(result->first_block); - tape->last_frame_position = ntohl(result->last_block); - tape->blocks_in_buffer = result->blocks_in_buffer[2]; + debug_log(DBG_SENSE, "Block Location - %u\n", + be32_to_cpu(*(u32 *)&readpos[4])); + + tape->partition = readpos[1]; + tape->first_frame = + be32_to_cpu(*(u32 *)&readpos[4]); set_bit(IDETAPE_ADDRESS_VALID, &tape->flags); idetape_end_request(drive, 1, 0); } @@ -2102,14 +1947,11 @@ static ide_startstop_t idetape_read_position_callback (ide_drive_t *drive) } /* - * idetape_create_write_filemark_cmd will: - * - * 1. Write a filemark if write_filemark=1. - * 2. Flush the device buffers without writing a filemark - * if write_filemark=0. - * + * Write a filemark if write_filemark=1. Flush the device buffers without + * writing a filemark otherwise. */ -static void idetape_create_write_filemark_cmd (ide_drive_t *drive, idetape_pc_t *pc,int write_filemark) +static void idetape_create_write_filemark_cmd(ide_drive_t *drive, + idetape_pc_t *pc, int write_filemark) { idetape_init_pc(pc); pc->c[0] = WRITE_FILEMARKS; @@ -2126,26 +1968,19 @@ static void idetape_create_test_unit_ready_cmd(idetape_pc_t *pc) } /* - * idetape_queue_pc_tail is based on the following functions: - * - * ide_do_drive_cmd from ide.c - * cdrom_queue_request and cdrom_queue_packet_command from ide-cd.c + * We add a special packet command request to the tail of the request queue, and + * wait for it to be serviced. This is not to be called from within the request + * handling part of the driver! We allocate here data on the stack and it is + * valid until the request is finished. This is not the case for the bottom part + * of the driver, where we are always leaving the functions to wait for an + * interrupt or a timer event. * - * We add a special packet command request to the tail of the request - * queue, and wait for it to be serviced. - * - * This is not to be called from within the request handling part - * of the driver ! We allocate here data in the stack, and it is valid - * until the request is finished. This is not the case for the bottom - * part of the driver, where we are always leaving the functions to wait - * for an interrupt or a timer event. - * - * From the bottom part of the driver, we should allocate safe memory - * using idetape_next_pc_storage and idetape_next_rq_storage, and add - * the request to the request list without waiting for it to be serviced ! - * In that case, we usually use idetape_queue_pc_head. + * From the bottom part of the driver, we should allocate safe memory using + * idetape_next_pc_storage() and ide_tape_next_rq_storage(), and add the request + * to the request list without waiting for it to be serviced! In that case, we + * usually use idetape_queue_pc_head(). */ -static int __idetape_queue_pc_tail (ide_drive_t *drive, idetape_pc_t *pc) +static int __idetape_queue_pc_tail(ide_drive_t *drive, idetape_pc_t *pc) { struct ide_tape_obj *tape = drive->driver_data; struct request rq; @@ -2156,7 +1991,8 @@ static int __idetape_queue_pc_tail (ide_drive_t *drive, idetape_pc_t *pc) return ide_do_drive_cmd(drive, &rq, ide_wait); } -static void idetape_create_load_unload_cmd (ide_drive_t *drive, idetape_pc_t *pc,int cmd) +static void idetape_create_load_unload_cmd(ide_drive_t *drive, idetape_pc_t *pc, + int cmd) { idetape_init_pc(pc); pc->c[0] = START_STOP; @@ -2171,9 +2007,7 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout) idetape_pc_t pc; int load_attempted = 0; - /* - * Wait for the tape to become ready - */ + /* Wait for the tape to become ready */ set_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags); timeout += jiffies; while (time_before(jiffies, timeout)) { @@ -2181,10 +2015,12 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout) if (!__idetape_queue_pc_tail(drive, &pc)) return 0; if ((tape->sense_key == 2 && tape->asc == 4 && tape->ascq == 2) - || (tape->asc == 0x3A)) { /* no media */ + || (tape->asc == 0x3A)) { + /* no media */ if (load_attempted) return -ENOMEDIUM; - idetape_create_load_unload_cmd(drive, &pc, IDETAPE_LU_LOAD_MASK); + idetape_create_load_unload_cmd(drive, &pc, + IDETAPE_LU_LOAD_MASK); __idetape_queue_pc_tail(drive, &pc); load_attempted = 1; /* not about to be ready */ @@ -2196,24 +2032,25 @@ static int idetape_wait_ready(ide_drive_t *drive, unsigned long timeout) return -EIO; } -static int idetape_queue_pc_tail (ide_drive_t *drive,idetape_pc_t *pc) +static int idetape_queue_pc_tail(ide_drive_t *drive, idetape_pc_t *pc) { return __idetape_queue_pc_tail(drive, pc); } -static int idetape_flush_tape_buffers (ide_drive_t *drive) +static int idetape_flush_tape_buffers(ide_drive_t *drive) { idetape_pc_t pc; int rc; idetape_create_write_filemark_cmd(drive, &pc, 0); - if ((rc = idetape_queue_pc_tail(drive, &pc))) + rc = idetape_queue_pc_tail(drive, &pc); + if (rc) return rc; idetape_wait_ready(drive, 60 * 5 * HZ); return 0; } -static void idetape_create_read_position_cmd (idetape_pc_t *pc) +static void idetape_create_read_position_cmd(idetape_pc_t *pc) { idetape_init_pc(pc); pc->c[0] = READ_POSITION; @@ -2221,25 +2058,23 @@ static void idetape_create_read_position_cmd (idetape_pc_t *pc) pc->callback = &idetape_read_position_callback; } -static int idetape_read_position (ide_drive_t *drive) +static int idetape_read_position(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; idetape_pc_t pc; int position; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_read_position\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PROCS, "Enter %s\n", __func__); idetape_create_read_position_cmd(&pc); if (idetape_queue_pc_tail(drive, &pc)) return -1; - position = tape->first_frame_position; + position = tape->first_frame; return position; } -static void idetape_create_locate_cmd (ide_drive_t *drive, idetape_pc_t *pc, unsigned int block, u8 partition, int skip) +static void idetape_create_locate_cmd(ide_drive_t *drive, idetape_pc_t *pc, + unsigned int block, u8 partition, int skip) { idetape_init_pc(pc); pc->c[0] = POSITION_TO_ELEMENT; @@ -2250,7 +2085,8 @@ static void idetape_create_locate_cmd (ide_drive_t *drive, idetape_pc_t *pc, uns pc->callback = &idetape_pc_callback; } -static int idetape_create_prevent_cmd (ide_drive_t *drive, idetape_pc_t *pc, int prevent) +static int idetape_create_prevent_cmd(ide_drive_t *drive, idetape_pc_t *pc, + int prevent) { idetape_tape_t *tape = drive->driver_data; @@ -2265,17 +2101,17 @@ static int idetape_create_prevent_cmd (ide_drive_t *drive, idetape_pc_t *pc, int return 1; } -static int __idetape_discard_read_pipeline (ide_drive_t *drive) +static int __idetape_discard_read_pipeline(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; unsigned long flags; int cnt; - if (tape->chrdev_direction != idetape_direction_read) + if (tape->chrdev_dir != IDETAPE_DIR_READ) return 0; /* Remove merge stage. */ - cnt = tape->merge_stage_size / tape->tape_block_size; + cnt = tape->merge_stage_size / tape->blk_size; if (test_and_clear_bit(IDETAPE_FILEMARK, &tape->flags)) ++cnt; /* Filemarks count as 1 sector */ tape->merge_stage_size = 0; @@ -2286,22 +2122,22 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive) /* Clear pipeline flags. */ clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags); - tape->chrdev_direction = idetape_direction_none; + tape->chrdev_dir = IDETAPE_DIR_NONE; /* Remove pipeline stages. */ if (tape->first_stage == NULL) return 0; - spin_lock_irqsave(&tape->spinlock, flags); + spin_lock_irqsave(&tape->lock, flags); tape->next_stage = NULL; if (idetape_pipeline_active(tape)) - idetape_wait_for_request(drive, tape->active_data_request); - spin_unlock_irqrestore(&tape->spinlock, flags); + idetape_wait_for_request(drive, tape->active_data_rq); + spin_unlock_irqrestore(&tape->lock, flags); while (tape->first_stage != NULL) { struct request *rq_ptr = &tape->first_stage->rq; - cnt += rq_ptr->nr_sectors - rq_ptr->current_nr_sectors; + cnt += rq_ptr->nr_sectors - rq_ptr->current_nr_sectors; if (rq_ptr->errors == IDETAPE_ERROR_FILEMARK) ++cnt; idetape_remove_stage_head(drive); @@ -2312,21 +2148,19 @@ static int __idetape_discard_read_pipeline (ide_drive_t *drive) } /* - * idetape_position_tape positions the tape to the requested block - * using the LOCATE packet command. A READ POSITION command is then - * issued to check where we are positioned. - * - * Like all higher level operations, we queue the commands at the tail - * of the request queue and wait for their completion. - * + * Position the tape to the requested block using the LOCATE packet command. + * A READ POSITION command is then issued to check where we are positioned. Like + * all higher level operations, we queue the commands at the tail of the request + * queue and wait for their completion. */ -static int idetape_position_tape (ide_drive_t *drive, unsigned int block, u8 partition, int skip) +static int idetape_position_tape(ide_drive_t *drive, unsigned int block, + u8 partition, int skip) { idetape_tape_t *tape = drive->driver_data; int retval; idetape_pc_t pc; - if (tape->chrdev_direction == idetape_direction_read) + if (tape->chrdev_dir == IDETAPE_DIR_READ) __idetape_discard_read_pipeline(drive); idetape_wait_ready(drive, 60 * 5 * HZ); idetape_create_locate_cmd(drive, &pc, block, partition, skip); @@ -2338,7 +2172,8 @@ static int idetape_position_tape (ide_drive_t *drive, unsigned int block, u8 par return (idetape_queue_pc_tail(drive, &pc)); } -static void idetape_discard_read_pipeline (ide_drive_t *drive, int restore_position) +static void idetape_discard_read_pipeline(ide_drive_t *drive, + int restore_position) { idetape_tape_t *tape = drive->driver_data; int cnt; @@ -2349,35 +2184,37 @@ static void idetape_discard_read_pipeline (ide_drive_t *drive, int restore_posit position = idetape_read_position(drive); seek = position > cnt ? position - cnt : 0; if (idetape_position_tape(drive, seek, 0, 0)) { - printk(KERN_INFO "ide-tape: %s: position_tape failed in discard_pipeline()\n", tape->name); + printk(KERN_INFO "ide-tape: %s: position_tape failed in" + " discard_pipeline()\n", tape->name); return; } } } /* - * idetape_queue_rw_tail generates a read/write request for the block - * device interface and wait for it to be serviced. + * Generate a read/write request for the block device interface and wait for it + * to be serviced. */ -static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct idetape_bh *bh) +static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, + struct idetape_bh *bh) { idetape_tape_t *tape = drive->driver_data; struct request rq; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: idetape_queue_rw_tail: cmd=%d\n",cmd); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_SENSE, "%s: cmd=%d\n", __func__, cmd); + if (idetape_pipeline_active(tape)) { - printk(KERN_ERR "ide-tape: bug: the pipeline is active in idetape_queue_rw_tail\n"); + printk(KERN_ERR "ide-tape: bug: the pipeline is active in %s\n", + __func__); return (0); } idetape_init_rq(&rq, cmd); rq.rq_disk = tape->disk; rq.special = (void *)bh; - rq.sector = tape->first_frame_position; - rq.nr_sectors = rq.current_nr_sectors = blocks; + rq.sector = tape->first_frame; + rq.nr_sectors = blocks; + rq.current_nr_sectors = blocks; (void) ide_do_drive_cmd(drive, &rq, ide_wait); if ((cmd & (REQ_IDETAPE_READ | REQ_IDETAPE_WRITE)) == 0) @@ -2387,14 +2224,11 @@ static int idetape_queue_rw_tail(ide_drive_t *drive, int cmd, int blocks, struct idetape_init_merge_stage(tape); if (rq.errors == IDETAPE_ERROR_GENERAL) return -EIO; - return (tape->tape_block_size * (blocks-rq.current_nr_sectors)); + return (tape->blk_size * (blocks-rq.current_nr_sectors)); } -/* - * idetape_insert_pipeline_into_queue is used to start servicing the - * pipeline stages, starting from tape->next_stage. - */ -static void idetape_insert_pipeline_into_queue (ide_drive_t *drive) +/* start servicing the pipeline stages, starting from tape->next_stage. */ +static void idetape_plug_pipeline(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; @@ -2403,19 +2237,20 @@ static void idetape_insert_pipeline_into_queue (ide_drive_t *drive) if (!idetape_pipeline_active(tape)) { set_bit(IDETAPE_PIPELINE_ACTIVE, &tape->flags); idetape_activate_next_stage(drive); - (void) ide_do_drive_cmd(drive, tape->active_data_request, ide_end); + (void) ide_do_drive_cmd(drive, tape->active_data_rq, ide_end); } } -static void idetape_create_inquiry_cmd (idetape_pc_t *pc) +static void idetape_create_inquiry_cmd(idetape_pc_t *pc) { idetape_init_pc(pc); pc->c[0] = INQUIRY; - pc->c[4] = pc->request_transfer = 254; + pc->c[4] = 254; + pc->request_transfer = 254; pc->callback = &idetape_pc_callback; } -static void idetape_create_rewind_cmd (ide_drive_t *drive, idetape_pc_t *pc) +static void idetape_create_rewind_cmd(ide_drive_t *drive, idetape_pc_t *pc) { idetape_init_pc(pc); pc->c[0] = REZERO_UNIT; @@ -2423,7 +2258,7 @@ static void idetape_create_rewind_cmd (ide_drive_t *drive, idetape_pc_t *pc) pc->callback = &idetape_pc_callback; } -static void idetape_create_erase_cmd (idetape_pc_t *pc) +static void idetape_create_erase_cmd(idetape_pc_t *pc) { idetape_init_pc(pc); pc->c[0] = ERASE; @@ -2432,7 +2267,7 @@ static void idetape_create_erase_cmd (idetape_pc_t *pc) pc->callback = &idetape_pc_callback; } -static void idetape_create_space_cmd (idetape_pc_t *pc,int count, u8 cmd) +static void idetape_create_space_cmd(idetape_pc_t *pc, int count, u8 cmd) { idetape_init_pc(pc); pc->c[0] = SPACE; @@ -2442,89 +2277,87 @@ static void idetape_create_space_cmd (idetape_pc_t *pc,int count, u8 cmd) pc->callback = &idetape_pc_callback; } -static void idetape_wait_first_stage (ide_drive_t *drive) +static void idetape_wait_first_stage(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; unsigned long flags; if (tape->first_stage == NULL) return; - spin_lock_irqsave(&tape->spinlock, flags); + spin_lock_irqsave(&tape->lock, flags); if (tape->active_stage == tape->first_stage) - idetape_wait_for_request(drive, tape->active_data_request); - spin_unlock_irqrestore(&tape->spinlock, flags); + idetape_wait_for_request(drive, tape->active_data_rq); + spin_unlock_irqrestore(&tape->lock, flags); } /* - * idetape_add_chrdev_write_request tries to add a character device - * originated write request to our pipeline. In case we don't succeed, - * we revert to non-pipelined operation mode for this request. + * Try to add a character device originated write request to our pipeline. In + * case we don't succeed, we revert to non-pipelined operation mode for this + * request. In order to accomplish that, we * - * 1. Try to allocate a new pipeline stage. - * 2. If we can't, wait for more and more requests to be serviced - * and try again each time. - * 3. If we still can't allocate a stage, fallback to - * non-pipelined operation mode for this request. + * 1. Try to allocate a new pipeline stage. + * 2. If we can't, wait for more and more requests to be serviced and try again + * each time. + * 3. If we still can't allocate a stage, fallback to non-pipelined operation + * mode for this request. */ -static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks) +static int idetape_add_chrdev_write_request(ide_drive_t *drive, int blocks) { idetape_tape_t *tape = drive->driver_data; idetape_stage_t *new_stage; unsigned long flags; struct request *rq; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 3) - printk(KERN_INFO "ide-tape: Reached idetape_add_chrdev_write_request\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_CHRDEV, "Enter %s\n", __func__); - /* - * Attempt to allocate a new stage. - * Pay special attention to possible race conditions. - */ + /* Attempt to allocate a new stage. Beware possible race conditions. */ while ((new_stage = idetape_kmalloc_stage(tape)) == NULL) { - spin_lock_irqsave(&tape->spinlock, flags); + spin_lock_irqsave(&tape->lock, flags); if (idetape_pipeline_active(tape)) { - idetape_wait_for_request(drive, tape->active_data_request); - spin_unlock_irqrestore(&tape->spinlock, flags); + idetape_wait_for_request(drive, tape->active_data_rq); + spin_unlock_irqrestore(&tape->lock, flags); } else { - spin_unlock_irqrestore(&tape->spinlock, flags); - idetape_insert_pipeline_into_queue(drive); + spin_unlock_irqrestore(&tape->lock, flags); + idetape_plug_pipeline(drive); if (idetape_pipeline_active(tape)) continue; /* - * Linux is short on memory. Fallback to - * non-pipelined operation mode for this request. + * The machine is short on memory. Fallback to non- + * pipelined operation mode for this request. */ - return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, tape->merge_stage->bh); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, + blocks, tape->merge_stage->bh); } } rq = &new_stage->rq; idetape_init_rq(rq, REQ_IDETAPE_WRITE); /* Doesn't actually matter - We always assume sequential access */ - rq->sector = tape->first_frame_position; - rq->nr_sectors = rq->current_nr_sectors = blocks; + rq->sector = tape->first_frame; + rq->current_nr_sectors = blocks; + rq->nr_sectors = blocks; idetape_switch_buffers(tape, new_stage); idetape_add_stage_tail(drive, new_stage); tape->pipeline_head++; - calculate_speeds(drive); + idetape_calculate_speeds(drive); /* - * Estimate whether the tape has stopped writing by checking - * if our write pipeline is currently empty. If we are not - * writing anymore, wait for the pipeline to be full enough - * (90%) before starting to service requests, so that we will - * be able to keep up with the higher speeds of the tape. + * Estimate whether the tape has stopped writing by checking if our + * write pipeline is currently empty. If we are not writing anymore, + * wait for the pipeline to be almost completely full (90%) before + * starting to service requests, so that we will be able to keep up with + * the higher speeds of the tape. */ if (!idetape_pipeline_active(tape)) { if (tape->nr_stages >= tape->max_stages * 9 / 10 || - tape->nr_stages >= tape->max_stages - tape->uncontrolled_pipeline_head_speed * 3 * 1024 / tape->tape_block_size) { + tape->nr_stages >= tape->max_stages - + tape->uncontrolled_pipeline_head_speed * 3 * 1024 / + tape->blk_size) { tape->measure_insert_time = 1; tape->insert_time = jiffies; tape->insert_size = 0; tape->insert_speed = 0; - idetape_insert_pipeline_into_queue(drive); + idetape_plug_pipeline(drive); } } if (test_and_clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags)) @@ -2534,31 +2367,32 @@ static int idetape_add_chrdev_write_request (ide_drive_t *drive, int blocks) } /* - * idetape_wait_for_pipeline will wait until all pending pipeline - * requests are serviced. Typically called on device close. + * Wait until all pending pipeline requests are serviced. Typically called on + * device close. */ -static void idetape_wait_for_pipeline (ide_drive_t *drive) +static void idetape_wait_for_pipeline(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; unsigned long flags; while (tape->next_stage || idetape_pipeline_active(tape)) { - idetape_insert_pipeline_into_queue(drive); - spin_lock_irqsave(&tape->spinlock, flags); + idetape_plug_pipeline(drive); + spin_lock_irqsave(&tape->lock, flags); if (idetape_pipeline_active(tape)) - idetape_wait_for_request(drive, tape->active_data_request); - spin_unlock_irqrestore(&tape->spinlock, flags); + idetape_wait_for_request(drive, tape->active_data_rq); + spin_unlock_irqrestore(&tape->lock, flags); } } -static void idetape_empty_write_pipeline (ide_drive_t *drive) +static void idetape_empty_write_pipeline(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; int blocks, min; struct idetape_bh *bh; - if (tape->chrdev_direction != idetape_direction_write) { - printk(KERN_ERR "ide-tape: bug: Trying to empty write pipeline, but we are not writing.\n"); + if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { + printk(KERN_ERR "ide-tape: bug: Trying to empty write pipeline," + " but we are not writing.\n"); return; } if (tape->merge_stage_size > tape->stage_size) { @@ -2566,12 +2400,13 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive) tape->merge_stage_size = tape->stage_size; } if (tape->merge_stage_size) { - blocks = tape->merge_stage_size / tape->tape_block_size; - if (tape->merge_stage_size % tape->tape_block_size) { + blocks = tape->merge_stage_size / tape->blk_size; + if (tape->merge_stage_size % tape->blk_size) { unsigned int i; blocks++; - i = tape->tape_block_size - tape->merge_stage_size % tape->tape_block_size; + i = tape->blk_size - tape->merge_stage_size % + tape->blk_size; bh = tape->bh->b_reqnext; while (bh) { atomic_set(&bh->b_count, 0); @@ -2580,12 +2415,14 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive) bh = tape->bh; while (i) { if (bh == NULL) { - - printk(KERN_INFO "ide-tape: bug, bh NULL\n"); + printk(KERN_INFO "ide-tape: bug," + " bh NULL\n"); break; } - min = min(i, (unsigned int)(bh->b_size - atomic_read(&bh->b_count))); - memset(bh->b_data + atomic_read(&bh->b_count), 0, min); + min = min(i, (unsigned int)(bh->b_size - + atomic_read(&bh->b_count))); + memset(bh->b_data + atomic_read(&bh->b_count), + 0, min); atomic_add(min, &bh->b_count); i -= min; bh = bh->b_reqnext; @@ -2600,13 +2437,13 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive) tape->merge_stage = NULL; } clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags); - tape->chrdev_direction = idetape_direction_none; + tape->chrdev_dir = IDETAPE_DIR_NONE; /* - * On the next backup, perform the feedback loop again. - * (I don't want to keep sense information between backups, - * as some systems are constantly on, and the system load - * can be totally different on the next backup). + * On the next backup, perform the feedback loop again. (I don't want to + * keep sense information between backups, as some systems are + * constantly on, and the system load can be totally different on the + * next backup). */ tape->max_stages = tape->min_pipeline; if (tape->first_stage != NULL || @@ -2621,21 +2458,25 @@ static void idetape_empty_write_pipeline (ide_drive_t *drive) } } -static void idetape_restart_speed_control (ide_drive_t *drive) +static void idetape_restart_speed_control(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; tape->restart_speed_control_req = 0; tape->pipeline_head = 0; - tape->controlled_last_pipeline_head = tape->uncontrolled_last_pipeline_head = 0; - tape->controlled_previous_pipeline_head = tape->uncontrolled_previous_pipeline_head = 0; - tape->pipeline_head_speed = tape->controlled_pipeline_head_speed = 5000; + tape->controlled_last_pipeline_head = 0; + tape->controlled_previous_pipeline_head = 0; + tape->uncontrolled_previous_pipeline_head = 0; + tape->controlled_pipeline_head_speed = 5000; + tape->pipeline_head_speed = 5000; tape->uncontrolled_pipeline_head_speed = 0; - tape->controlled_pipeline_head_time = tape->uncontrolled_pipeline_head_time = jiffies; - tape->controlled_previous_head_time = tape->uncontrolled_previous_head_time = jiffies; + tape->controlled_pipeline_head_time = + tape->uncontrolled_pipeline_head_time = jiffies; + tape->controlled_previous_head_time = + tape->uncontrolled_previous_head_time = jiffies; } -static int idetape_initiate_read (ide_drive_t *drive, int max_stages) +static int idetape_init_read(ide_drive_t *drive, int max_stages) { idetape_tape_t *tape = drive->driver_data; idetape_stage_t *new_stage; @@ -2644,32 +2485,35 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages) u16 blocks = *(u16 *)&tape->caps[12]; /* Initialize read operation */ - if (tape->chrdev_direction != idetape_direction_read) { - if (tape->chrdev_direction == idetape_direction_write) { + if (tape->chrdev_dir != IDETAPE_DIR_READ) { + if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { idetape_empty_write_pipeline(drive); idetape_flush_tape_buffers(drive); } if (tape->merge_stage || tape->merge_stage_size) { - printk (KERN_ERR "ide-tape: merge_stage_size should be 0 now\n"); + printk(KERN_ERR "ide-tape: merge_stage_size should be" + " 0 now\n"); tape->merge_stage_size = 0; } - if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL) + tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0); + if (!tape->merge_stage) return -ENOMEM; - tape->chrdev_direction = idetape_direction_read; + tape->chrdev_dir = IDETAPE_DIR_READ; /* - * Issue a read 0 command to ensure that DSC handshake - * is switched from completion mode to buffer available - * mode. - * No point in issuing this if DSC overlap isn't supported, - * some drives (Seagate STT3401A) will return an error. + * Issue a read 0 command to ensure that DSC handshake is + * switched from completion mode to buffer available mode. + * No point in issuing this if DSC overlap isn't supported, some + * drives (Seagate STT3401A) will return an error. */ if (drive->dsc_overlap) { - bytes_read = idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, 0, tape->merge_stage->bh); + bytes_read = idetape_queue_rw_tail(drive, + REQ_IDETAPE_READ, 0, + tape->merge_stage->bh); if (bytes_read < 0) { __idetape_kfree_stage(tape->merge_stage); tape->merge_stage = NULL; - tape->chrdev_direction = idetape_direction_none; + tape->chrdev_dir = IDETAPE_DIR_NONE; return bytes_read; } } @@ -2677,8 +2521,9 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages) if (tape->restart_speed_control_req) idetape_restart_speed_control(drive); idetape_init_rq(&rq, REQ_IDETAPE_READ); - rq.sector = tape->first_frame_position; - rq.nr_sectors = rq.current_nr_sectors = blocks; + rq.sector = tape->first_frame; + rq.nr_sectors = blocks; + rq.current_nr_sectors = blocks; if (!test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags) && tape->nr_stages < max_stages) { new_stage = idetape_kmalloc_stage(tape); @@ -2696,50 +2541,43 @@ static int idetape_initiate_read (ide_drive_t *drive, int max_stages) tape->insert_time = jiffies; tape->insert_size = 0; tape->insert_speed = 0; - idetape_insert_pipeline_into_queue(drive); + idetape_plug_pipeline(drive); } } return 0; } /* - * idetape_add_chrdev_read_request is called from idetape_chrdev_read - * to service a character device read request and add read-ahead - * requests to our pipeline. + * Called from idetape_chrdev_read() to service a character device read request + * and add read-ahead requests to our pipeline. */ -static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks) +static int idetape_add_chrdev_read_request(ide_drive_t *drive, int blocks) { idetape_tape_t *tape = drive->driver_data; unsigned long flags; struct request *rq_ptr; int bytes_read; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_add_chrdev_read_request, %d blocks\n", blocks); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PROCS, "Enter %s, %d blocks\n", __func__, blocks); - /* - * If we are at a filemark, return a read length of 0 - */ + /* If we are at a filemark, return a read length of 0 */ if (test_bit(IDETAPE_FILEMARK, &tape->flags)) return 0; - /* - * Wait for the next block to be available at the head - * of the pipeline - */ - idetape_initiate_read(drive, tape->max_stages); + /* Wait for the next block to reach the head of the pipeline. */ + idetape_init_read(drive, tape->max_stages); if (tape->first_stage == NULL) { if (test_bit(IDETAPE_PIPELINE_ERROR, &tape->flags)) return 0; - return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks, tape->merge_stage->bh); + return idetape_queue_rw_tail(drive, REQ_IDETAPE_READ, blocks, + tape->merge_stage->bh); } idetape_wait_first_stage(drive); rq_ptr = &tape->first_stage->rq; - bytes_read = tape->tape_block_size * (rq_ptr->nr_sectors - rq_ptr->current_nr_sectors); - rq_ptr->nr_sectors = rq_ptr->current_nr_sectors = 0; - + bytes_read = tape->blk_size * (rq_ptr->nr_sectors - + rq_ptr->current_nr_sectors); + rq_ptr->nr_sectors = 0; + rq_ptr->current_nr_sectors = 0; if (rq_ptr->errors == IDETAPE_ERROR_EOD) return 0; @@ -2747,43 +2585,46 @@ static int idetape_add_chrdev_read_request (ide_drive_t *drive,int blocks) idetape_switch_buffers(tape, tape->first_stage); if (rq_ptr->errors == IDETAPE_ERROR_FILEMARK) set_bit(IDETAPE_FILEMARK, &tape->flags); - spin_lock_irqsave(&tape->spinlock, flags); + spin_lock_irqsave(&tape->lock, flags); idetape_remove_stage_head(drive); - spin_unlock_irqrestore(&tape->spinlock, flags); + spin_unlock_irqrestore(&tape->lock, flags); tape->pipeline_head++; - calculate_speeds(drive); + idetape_calculate_speeds(drive); } - if (bytes_read > blocks * tape->tape_block_size) { - printk(KERN_ERR "ide-tape: bug: trying to return more bytes than requested\n"); - bytes_read = blocks * tape->tape_block_size; + if (bytes_read > blocks * tape->blk_size) { + printk(KERN_ERR "ide-tape: bug: trying to return more bytes" + " than requested\n"); + bytes_read = blocks * tape->blk_size; } return (bytes_read); } -static void idetape_pad_zeros (ide_drive_t *drive, int bcount) +static void idetape_pad_zeros(ide_drive_t *drive, int bcount) { idetape_tape_t *tape = drive->driver_data; struct idetape_bh *bh; int blocks; - + while (bcount) { unsigned int count; bh = tape->merge_stage->bh; count = min(tape->stage_size, bcount); bcount -= count; - blocks = count / tape->tape_block_size; + blocks = count / tape->blk_size; while (count) { - atomic_set(&bh->b_count, min(count, (unsigned int)bh->b_size)); + atomic_set(&bh->b_count, + min(count, (unsigned int)bh->b_size)); memset(bh->b_data, 0, atomic_read(&bh->b_count)); count -= atomic_read(&bh->b_count); bh = bh->b_reqnext; } - idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, tape->merge_stage->bh); + idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, blocks, + tape->merge_stage->bh); } } -static int idetape_pipeline_size (ide_drive_t *drive) +static int idetape_pipeline_size(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; idetape_stage_t *stage; @@ -2794,9 +2635,10 @@ static int idetape_pipeline_size (ide_drive_t *drive) stage = tape->first_stage; while (stage != NULL) { rq = &stage->rq; - size += tape->tape_block_size * (rq->nr_sectors-rq->current_nr_sectors); + size += tape->blk_size * (rq->nr_sectors - + rq->current_nr_sectors); if (rq->errors == IDETAPE_ERROR_FILEMARK) - size += tape->tape_block_size; + size += tape->blk_size; stage = stage->next; } size += tape->merge_stage_size; @@ -2804,20 +2646,18 @@ static int idetape_pipeline_size (ide_drive_t *drive) } /* - * Rewinds the tape to the Beginning Of the current Partition (BOP). - * - * We currently support only one partition. - */ -static int idetape_rewind_tape (ide_drive_t *drive) + * Rewinds the tape to the Beginning Of the current Partition (BOP). We + * currently support only one partition. + */ +static int idetape_rewind_tape(ide_drive_t *drive) { int retval; idetape_pc_t pc; -#if IDETAPE_DEBUG_LOG - idetape_tape_t *tape = drive->driver_data; - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: Reached idetape_rewind_tape\n"); -#endif /* IDETAPE_DEBUG_LOG */ - + idetape_tape_t *tape; + tape = drive->driver_data; + + debug_log(DBG_SENSE, "Enter %s\n", __func__); + idetape_create_rewind_cmd(drive, &pc); retval = idetape_queue_pc_tail(drive, &pc); if (retval) @@ -2830,14 +2670,9 @@ static int idetape_rewind_tape (ide_drive_t *drive) return 0; } -/* - * Our special ide-tape ioctl's. - * - * Currently there aren't any ioctl's. - * mtio.h compatible commands should be issued to the character device - * interface. - */ -static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned long arg) +/* mtio.h compatible commands should be issued to the chrdev interface. */ +static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, + unsigned long arg) { idetape_tape_t *tape = drive->driver_data; void __user *argp = (void __user *)arg; @@ -2848,44 +2683,41 @@ static int idetape_blkdev_ioctl(ide_drive_t *drive, unsigned int cmd, unsigned l int nr_stages; } config; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 4) - printk(KERN_INFO "ide-tape: Reached idetape_blkdev_ioctl\n"); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_PROCS, "Enter %s\n", __func__); + switch (cmd) { - case 0x0340: - if (copy_from_user(&config, argp, sizeof(config))) - return -EFAULT; - tape->best_dsc_rw_frequency = config.dsc_rw_frequency; - tape->max_stages = config.nr_stages; - break; - case 0x0350: - config.dsc_rw_frequency = (int) tape->best_dsc_rw_frequency; - config.nr_stages = tape->max_stages; - if (copy_to_user(argp, &config, sizeof(config))) - return -EFAULT; - break; - default: - return -EIO; + case 0x0340: + if (copy_from_user(&config, argp, sizeof(config))) + return -EFAULT; + tape->best_dsc_rw_freq = config.dsc_rw_frequency; + tape->max_stages = config.nr_stages; + break; + case 0x0350: + config.dsc_rw_frequency = (int) tape->best_dsc_rw_freq; + config.nr_stages = tape->max_stages; + if (copy_to_user(argp, &config, sizeof(config))) + return -EFAULT; + break; + default: + return -EIO; } return 0; } /* - * idetape_space_over_filemarks is now a bit more complicated than just - * passing the command to the tape since we may have crossed some - * filemarks during our pipelined read-ahead mode. - * - * As a minor side effect, the pipeline enables us to support MTFSFM when - * the filemark is in our internal pipeline even if the tape doesn't - * support spacing over filemarks in the reverse direction. + * The function below is now a bit more complicated than just passing the + * command to the tape since we may have crossed some filemarks during our + * pipelined read-ahead mode. As a minor side effect, the pipeline enables us to + * support MTFSFM when the filemark is in our internal pipeline even if the tape + * doesn't support spacing over filemarks in the reverse direction. */ -static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_count) +static int idetape_space_over_filemarks(ide_drive_t *drive, short mt_op, + int mt_count) { idetape_tape_t *tape = drive->driver_data; idetape_pc_t pc; unsigned long flags; - int retval,count=0; + int retval, count = 0; int sprev = !!(tape->caps[4] & 0x20); if (mt_count == 0) @@ -2893,14 +2725,11 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c if (MTBSF == mt_op || MTBSFM == mt_op) { if (!sprev) return -EIO; - mt_count = - mt_count; + mt_count = -mt_count; } - if (tape->chrdev_direction == idetape_direction_read) { - /* - * We have a read-ahead buffer. Scan it for crossed - * filemarks. - */ + if (tape->chrdev_dir == IDETAPE_DIR_READ) { + /* its a read-ahead buffer, scan it for crossed filemarks. */ tape->merge_stage_size = 0; if (test_and_clear_bit(IDETAPE_FILEMARK, &tape->flags)) ++count; @@ -2910,24 +2739,27 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c set_bit(IDETAPE_FILEMARK, &tape->flags); return 0; } - spin_lock_irqsave(&tape->spinlock, flags); + spin_lock_irqsave(&tape->lock, flags); if (tape->first_stage == tape->active_stage) { /* - * We have reached the active stage in the read pipeline. - * There is no point in allowing the drive to continue - * reading any farther, so we stop the pipeline. + * We have reached the active stage in the read + * pipeline. There is no point in allowing the + * drive to continue reading any farther, so we + * stop the pipeline. * - * This section should be moved to a separate subroutine, - * because a similar function is performed in - * __idetape_discard_read_pipeline(), for example. + * This section should be moved to a separate + * subroutine because similar operations are + * done in __idetape_discard_read_pipeline(), + * for example. */ tape->next_stage = NULL; - spin_unlock_irqrestore(&tape->spinlock, flags); + spin_unlock_irqrestore(&tape->lock, flags); idetape_wait_first_stage(drive); tape->next_stage = tape->first_stage->next; } else - spin_unlock_irqrestore(&tape->spinlock, flags); - if (tape->first_stage->rq.errors == IDETAPE_ERROR_FILEMARK) + spin_unlock_irqrestore(&tape->lock, flags); + if (tape->first_stage->rq.errors == + IDETAPE_ERROR_FILEMARK) ++count; idetape_remove_stage_head(drive); } @@ -2935,73 +2767,74 @@ static int idetape_space_over_filemarks (ide_drive_t *drive,short mt_op,int mt_c } /* - * The filemark was not found in our internal pipeline. - * Now we can issue the space command. + * The filemark was not found in our internal pipeline; now we can issue + * the space command. */ switch (mt_op) { - case MTFSF: - case MTBSF: - idetape_create_space_cmd(&pc,mt_count-count,IDETAPE_SPACE_OVER_FILEMARK); - return (idetape_queue_pc_tail(drive, &pc)); - case MTFSFM: - case MTBSFM: - if (!sprev) - return (-EIO); - retval = idetape_space_over_filemarks(drive, MTFSF, mt_count-count); - if (retval) return (retval); - count = (MTBSFM == mt_op ? 1 : -1); - return (idetape_space_over_filemarks(drive, MTFSF, count)); - default: - printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n",mt_op); - return (-EIO); + case MTFSF: + case MTBSF: + idetape_create_space_cmd(&pc, mt_count - count, + IDETAPE_SPACE_OVER_FILEMARK); + return idetape_queue_pc_tail(drive, &pc); + case MTFSFM: + case MTBSFM: + if (!sprev) + return -EIO; + retval = idetape_space_over_filemarks(drive, MTFSF, + mt_count - count); + if (retval) + return retval; + count = (MTBSFM == mt_op ? 1 : -1); + return idetape_space_over_filemarks(drive, MTFSF, count); + default: + printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n", + mt_op); + return -EIO; } } - /* - * Our character device read / write functions. + * Our character device read / write functions. * - * The tape is optimized to maximize throughput when it is transferring - * an integral number of the "continuous transfer limit", which is - * a parameter of the specific tape (26 KB on my particular tape). - * (32 kB for Onstream) + * The tape is optimized to maximize throughput when it is transferring an + * integral number of the "continuous transfer limit", which is a parameter of + * the specific tape (26kB on my particular tape, 32kB for Onstream). * - * As of version 1.3 of the driver, the character device provides an - * abstract continuous view of the media - any mix of block sizes (even 1 - * byte) on the same backup/restore procedure is supported. The driver - * will internally convert the requests to the recommended transfer unit, - * so that an unmatch between the user's block size to the recommended - * size will only result in a (slightly) increased driver overhead, but - * will no longer hit performance. - * This is not applicable to Onstream. + * As of version 1.3 of the driver, the character device provides an abstract + * continuous view of the media - any mix of block sizes (even 1 byte) on the + * same backup/restore procedure is supported. The driver will internally + * convert the requests to the recommended transfer unit, so that an unmatch + * between the user's block size to the recommended size will only result in a + * (slightly) increased driver overhead, but will no longer hit performance. + * This is not applicable to Onstream. */ -static ssize_t idetape_chrdev_read (struct file *file, char __user *buf, - size_t count, loff_t *ppos) +static ssize_t idetape_chrdev_read(struct file *file, char __user *buf, + size_t count, loff_t *ppos) { struct ide_tape_obj *tape = ide_tape_f(file); ide_drive_t *drive = tape->drive; - ssize_t bytes_read,temp, actually_read = 0, rc; + ssize_t bytes_read, temp, actually_read = 0, rc; ssize_t ret = 0; u16 ctl = *(u16 *)&tape->caps[12]; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 3) - printk(KERN_INFO "ide-tape: Reached idetape_chrdev_read, count %Zd\n", count); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); - if (tape->chrdev_direction != idetape_direction_read) { + if (tape->chrdev_dir != IDETAPE_DIR_READ) { if (test_bit(IDETAPE_DETECT_BS, &tape->flags)) - if (count > tape->tape_block_size && - (count % tape->tape_block_size) == 0) - tape->user_bs_factor = count / tape->tape_block_size; + if (count > tape->blk_size && + (count % tape->blk_size) == 0) + tape->user_bs_factor = count / tape->blk_size; } - if ((rc = idetape_initiate_read(drive, tape->max_stages)) < 0) + rc = idetape_init_read(drive, tape->max_stages); + if (rc < 0) return rc; if (count == 0) return (0); if (tape->merge_stage_size) { - actually_read = min((unsigned int)(tape->merge_stage_size), (unsigned int)count); - if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, actually_read)) + actually_read = min((unsigned int)(tape->merge_stage_size), + (unsigned int)count); + if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, + actually_read)) ret = -EFAULT; buf += actually_read; tape->merge_stage_size -= actually_read; @@ -3011,7 +2844,8 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf, bytes_read = idetape_add_chrdev_read_request(drive, ctl); if (bytes_read <= 0) goto finish; - if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, bytes_read)) + if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, + bytes_read)) ret = -EFAULT; buf += bytes_read; count -= bytes_read; @@ -3022,25 +2856,24 @@ static ssize_t idetape_chrdev_read (struct file *file, char __user *buf, if (bytes_read <= 0) goto finish; temp = min((unsigned long)count, (unsigned long)bytes_read); - if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, temp)) + if (idetape_copy_stage_to_user(tape, buf, tape->merge_stage, + temp)) ret = -EFAULT; actually_read += temp; tape->merge_stage_size = bytes_read-temp; } finish: if (!actually_read && test_bit(IDETAPE_FILEMARK, &tape->flags)) { -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 2) - printk(KERN_INFO "ide-tape: %s: spacing over filemark\n", tape->name); -#endif + debug_log(DBG_SENSE, "%s: spacing over filemark\n", tape->name); + idetape_space_over_filemarks(drive, MTFSF, 1); return 0; } - return (ret) ? ret : actually_read; + return ret ? ret : actually_read; } -static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, +static ssize_t idetape_chrdev_write(struct file *file, const char __user *buf, size_t count, loff_t *ppos) { struct ide_tape_obj *tape = ide_tape_f(file); @@ -3053,39 +2886,37 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, if (tape->write_prot) return -EACCES; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 3) - printk(KERN_INFO "ide-tape: Reached idetape_chrdev_write, " - "count %Zd\n", count); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_CHRDEV, "Enter %s, count %Zd\n", __func__, count); /* Initialize write operation */ - if (tape->chrdev_direction != idetape_direction_write) { - if (tape->chrdev_direction == idetape_direction_read) + if (tape->chrdev_dir != IDETAPE_DIR_WRITE) { + if (tape->chrdev_dir == IDETAPE_DIR_READ) idetape_discard_read_pipeline(drive, 1); if (tape->merge_stage || tape->merge_stage_size) { printk(KERN_ERR "ide-tape: merge_stage_size " "should be 0 now\n"); tape->merge_stage_size = 0; } - if ((tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0)) == NULL) + tape->merge_stage = __idetape_kmalloc_stage(tape, 0, 0); + if (!tape->merge_stage) return -ENOMEM; - tape->chrdev_direction = idetape_direction_write; + tape->chrdev_dir = IDETAPE_DIR_WRITE; idetape_init_merge_stage(tape); /* - * Issue a write 0 command to ensure that DSC handshake - * is switched from completion mode to buffer available - * mode. - * No point in issuing this if DSC overlap isn't supported, - * some drives (Seagate STT3401A) will return an error. + * Issue a write 0 command to ensure that DSC handshake is + * switched from completion mode to buffer available mode. No + * point in issuing this if DSC overlap isn't supported, some + * drives (Seagate STT3401A) will return an error. */ if (drive->dsc_overlap) { - ssize_t retval = idetape_queue_rw_tail(drive, REQ_IDETAPE_WRITE, 0, tape->merge_stage->bh); + ssize_t retval = idetape_queue_rw_tail(drive, + REQ_IDETAPE_WRITE, 0, + tape->merge_stage->bh); if (retval < 0) { __idetape_kfree_stage(tape->merge_stage); tape->merge_stage = NULL; - tape->chrdev_direction = idetape_direction_none; + tape->chrdev_dir = IDETAPE_DIR_NONE; return retval; } } @@ -3096,11 +2927,14 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, idetape_restart_speed_control(drive); if (tape->merge_stage_size) { if (tape->merge_stage_size >= tape->stage_size) { - printk(KERN_ERR "ide-tape: bug: merge buffer too big\n"); + printk(KERN_ERR "ide-tape: bug: merge buf too big\n"); tape->merge_stage_size = 0; } - actually_written = min((unsigned int)(tape->stage_size - tape->merge_stage_size), (unsigned int)count); - if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, actually_written)) + actually_written = min((unsigned int) + (tape->stage_size - tape->merge_stage_size), + (unsigned int)count); + if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, + actually_written)) ret = -EFAULT; buf += actually_written; tape->merge_stage_size += actually_written; @@ -3116,7 +2950,8 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, } while (count >= tape->stage_size) { ssize_t retval; - if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, tape->stage_size)) + if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, + tape->stage_size)) ret = -EFAULT; buf += tape->stage_size; count -= tape->stage_size; @@ -3127,14 +2962,15 @@ static ssize_t idetape_chrdev_write (struct file *file, const char __user *buf, } if (count) { actually_written += count; - if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, count)) + if (idetape_copy_stage_from_user(tape, tape->merge_stage, buf, + count)) ret = -EFAULT; tape->merge_stage_size += count; } - return (ret) ? ret : actually_written; + return ret ? ret : actually_written; } -static int idetape_write_filemark (ide_drive_t *drive) +static int idetape_write_filemark(ide_drive_t *drive) { idetape_pc_t pc; @@ -3165,113 +3001,117 @@ static int idetape_mtioctop(ide_drive_t *drive, short mt_op, int mt_count) { idetape_tape_t *tape = drive->driver_data; idetape_pc_t pc; - int i,retval; + int i, retval; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 1) - printk(KERN_INFO "ide-tape: Handling MTIOCTOP ioctl: " - "mt_op=%d, mt_count=%d\n", mt_op, mt_count); -#endif /* IDETAPE_DEBUG_LOG */ - /* - * Commands which need our pipelined read-ahead stages. - */ + debug_log(DBG_ERR, "Handling MTIOCTOP ioctl: mt_op=%d, mt_count=%d\n", + mt_op, mt_count); + + /* Commands which need our pipelined read-ahead stages. */ switch (mt_op) { - case MTFSF: - case MTFSFM: - case MTBSF: - case MTBSFM: - if (!mt_count) - return (0); - return (idetape_space_over_filemarks(drive,mt_op,mt_count)); - default: - break; + case MTFSF: + case MTFSFM: + case MTBSF: + case MTBSFM: + if (!mt_count) + return 0; + return idetape_space_over_filemarks(drive, mt_op, mt_count); + default: + break; } + switch (mt_op) { - case MTWEOF: - if (tape->write_prot) - return -EACCES; - idetape_discard_read_pipeline(drive, 1); - for (i = 0; i < mt_count; i++) { - retval = idetape_write_filemark(drive); - if (retval) - return retval; - } - return (0); - case MTREW: - idetape_discard_read_pipeline(drive, 0); - if (idetape_rewind_tape(drive)) + case MTWEOF: + if (tape->write_prot) + return -EACCES; + idetape_discard_read_pipeline(drive, 1); + for (i = 0; i < mt_count; i++) { + retval = idetape_write_filemark(drive); + if (retval) + return retval; + } + return 0; + case MTREW: + idetape_discard_read_pipeline(drive, 0); + if (idetape_rewind_tape(drive)) + return -EIO; + return 0; + case MTLOAD: + idetape_discard_read_pipeline(drive, 0); + idetape_create_load_unload_cmd(drive, &pc, + IDETAPE_LU_LOAD_MASK); + return idetape_queue_pc_tail(drive, &pc); + case MTUNLOAD: + case MTOFFL: + /* + * If door is locked, attempt to unlock before + * attempting to eject. + */ + if (tape->door_locked) { + if (idetape_create_prevent_cmd(drive, &pc, 0)) + if (!idetape_queue_pc_tail(drive, &pc)) + tape->door_locked = DOOR_UNLOCKED; + } + idetape_discard_read_pipeline(drive, 0); + idetape_create_load_unload_cmd(drive, &pc, + !IDETAPE_LU_LOAD_MASK); + retval = idetape_queue_pc_tail(drive, &pc); + if (!retval) + clear_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags); + return retval; + case MTNOP: + idetape_discard_read_pipeline(drive, 0); + return idetape_flush_tape_buffers(drive); + case MTRETEN: + idetape_discard_read_pipeline(drive, 0); + idetape_create_load_unload_cmd(drive, &pc, + IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK); + return idetape_queue_pc_tail(drive, &pc); + case MTEOM: + idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD); + return idetape_queue_pc_tail(drive, &pc); + case MTERASE: + (void)idetape_rewind_tape(drive); + idetape_create_erase_cmd(&pc); + return idetape_queue_pc_tail(drive, &pc); + case MTSETBLK: + if (mt_count) { + if (mt_count < tape->blk_size || + mt_count % tape->blk_size) return -EIO; + tape->user_bs_factor = mt_count / tape->blk_size; + clear_bit(IDETAPE_DETECT_BS, &tape->flags); + } else + set_bit(IDETAPE_DETECT_BS, &tape->flags); + return 0; + case MTSEEK: + idetape_discard_read_pipeline(drive, 0); + return idetape_position_tape(drive, + mt_count * tape->user_bs_factor, tape->partition, 0); + case MTSETPART: + idetape_discard_read_pipeline(drive, 0); + return idetape_position_tape(drive, 0, mt_count, 0); + case MTFSR: + case MTBSR: + case MTLOCK: + if (!idetape_create_prevent_cmd(drive, &pc, 1)) return 0; - case MTLOAD: - idetape_discard_read_pipeline(drive, 0); - idetape_create_load_unload_cmd(drive, &pc, IDETAPE_LU_LOAD_MASK); - return (idetape_queue_pc_tail(drive, &pc)); - case MTUNLOAD: - case MTOFFL: - /* - * If door is locked, attempt to unlock before - * attempting to eject. - */ - if (tape->door_locked) { - if (idetape_create_prevent_cmd(drive, &pc, 0)) - if (!idetape_queue_pc_tail(drive, &pc)) - tape->door_locked = DOOR_UNLOCKED; - } - idetape_discard_read_pipeline(drive, 0); - idetape_create_load_unload_cmd(drive, &pc,!IDETAPE_LU_LOAD_MASK); - retval = idetape_queue_pc_tail(drive, &pc); - if (!retval) - clear_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags); + retval = idetape_queue_pc_tail(drive, &pc); + if (retval) return retval; - case MTNOP: - idetape_discard_read_pipeline(drive, 0); - return (idetape_flush_tape_buffers(drive)); - case MTRETEN: - idetape_discard_read_pipeline(drive, 0); - idetape_create_load_unload_cmd(drive, &pc,IDETAPE_LU_RETENSION_MASK | IDETAPE_LU_LOAD_MASK); - return (idetape_queue_pc_tail(drive, &pc)); - case MTEOM: - idetape_create_space_cmd(&pc, 0, IDETAPE_SPACE_TO_EOD); - return (idetape_queue_pc_tail(drive, &pc)); - case MTERASE: - (void) idetape_rewind_tape(drive); - idetape_create_erase_cmd(&pc); - return (idetape_queue_pc_tail(drive, &pc)); - case MTSETBLK: - if (mt_count) { - if (mt_count < tape->tape_block_size || mt_count % tape->tape_block_size) - return -EIO; - tape->user_bs_factor = mt_count / tape->tape_block_size; - clear_bit(IDETAPE_DETECT_BS, &tape->flags); - } else - set_bit(IDETAPE_DETECT_BS, &tape->flags); - return 0; - case MTSEEK: - idetape_discard_read_pipeline(drive, 0); - return idetape_position_tape(drive, mt_count * tape->user_bs_factor, tape->partition, 0); - case MTSETPART: - idetape_discard_read_pipeline(drive, 0); - return (idetape_position_tape(drive, 0, mt_count, 0)); - case MTFSR: - case MTBSR: - case MTLOCK: - if (!idetape_create_prevent_cmd(drive, &pc, 1)) - return 0; - retval = idetape_queue_pc_tail(drive, &pc); - if (retval) return retval; - tape->door_locked = DOOR_EXPLICITLY_LOCKED; - return 0; - case MTUNLOCK: - if (!idetape_create_prevent_cmd(drive, &pc, 0)) - return 0; - retval = idetape_queue_pc_tail(drive, &pc); - if (retval) return retval; - tape->door_locked = DOOR_UNLOCKED; + tape->door_locked = DOOR_EXPLICITLY_LOCKED; + return 0; + case MTUNLOCK: + if (!idetape_create_prevent_cmd(drive, &pc, 0)) return 0; - default: - printk(KERN_ERR "ide-tape: MTIO operation %d not " - "supported\n", mt_op); - return (-EIO); + retval = idetape_queue_pc_tail(drive, &pc); + if (retval) + return retval; + tape->door_locked = DOOR_UNLOCKED; + return 0; + default: + printk(KERN_ERR "ide-tape: MTIO operation %d not supported\n", + mt_op); + return -EIO; } } @@ -3288,50 +3128,51 @@ static int idetape_chrdev_ioctl(struct inode *inode, struct file *file, struct mtop mtop; struct mtget mtget; struct mtpos mtpos; - int block_offset = 0, position = tape->first_frame_position; + int block_offset = 0, position = tape->first_frame; void __user *argp = (void __user *)arg; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 3) - printk(KERN_INFO "ide-tape: Reached idetape_chrdev_ioctl, " - "cmd=%u\n", cmd); -#endif /* IDETAPE_DEBUG_LOG */ + debug_log(DBG_CHRDEV, "Enter %s, cmd=%u\n", __func__, cmd); tape->restart_speed_control_req = 1; - if (tape->chrdev_direction == idetape_direction_write) { + if (tape->chrdev_dir == IDETAPE_DIR_WRITE) { idetape_empty_write_pipeline(drive); idetape_flush_tape_buffers(drive); } if (cmd == MTIOCGET || cmd == MTIOCPOS) { - block_offset = idetape_pipeline_size(drive) / (tape->tape_block_size * tape->user_bs_factor); - if ((position = idetape_read_position(drive)) < 0) + block_offset = idetape_pipeline_size(drive) / + (tape->blk_size * tape->user_bs_factor); + position = idetape_read_position(drive); + if (position < 0) return -EIO; } switch (cmd) { - case MTIOCTOP: - if (copy_from_user(&mtop, argp, sizeof (struct mtop))) - return -EFAULT; - return (idetape_mtioctop(drive,mtop.mt_op,mtop.mt_count)); - case MTIOCGET: - memset(&mtget, 0, sizeof (struct mtget)); - mtget.mt_type = MT_ISSCSI2; - mtget.mt_blkno = position / tape->user_bs_factor - block_offset; - mtget.mt_dsreg = ((tape->tape_block_size * tape->user_bs_factor) << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK; - if (tape->drv_write_prot) { - mtget.mt_gstat |= GMT_WR_PROT(0xffffffff); - } - if (copy_to_user(argp, &mtget, sizeof(struct mtget))) - return -EFAULT; - return 0; - case MTIOCPOS: - mtpos.mt_blkno = position / tape->user_bs_factor - block_offset; - if (copy_to_user(argp, &mtpos, sizeof(struct mtpos))) - return -EFAULT; - return 0; - default: - if (tape->chrdev_direction == idetape_direction_read) - idetape_discard_read_pipeline(drive, 1); - return idetape_blkdev_ioctl(drive, cmd, arg); + case MTIOCTOP: + if (copy_from_user(&mtop, argp, sizeof(struct mtop))) + return -EFAULT; + return idetape_mtioctop(drive, mtop.mt_op, mtop.mt_count); + case MTIOCGET: + memset(&mtget, 0, sizeof(struct mtget)); + mtget.mt_type = MT_ISSCSI2; + mtget.mt_blkno = position / tape->user_bs_factor - block_offset; + mtget.mt_dsreg = + ((tape->blk_size * tape->user_bs_factor) + << MT_ST_BLKSIZE_SHIFT) & MT_ST_BLKSIZE_MASK; + + if (tape->drv_write_prot) + mtget.mt_gstat |= GMT_WR_PROT(0xffffffff); + + if (copy_to_user(argp, &mtget, sizeof(struct mtget))) + return -EFAULT; + return 0; + case MTIOCPOS: + mtpos.mt_blkno = position / tape->user_bs_factor - block_offset; + if (copy_to_user(argp, &mtpos, sizeof(struct mtpos))) + return -EFAULT; + return 0; + default: + if (tape->chrdev_dir == IDETAPE_DIR_READ) + idetape_discard_read_pipeline(drive, 1); + return idetape_blkdev_ioctl(drive, cmd, arg); } } @@ -3347,23 +3188,20 @@ static void ide_tape_get_bsize_from_bdesc(ide_drive_t *drive) idetape_create_mode_sense_cmd(&pc, IDETAPE_BLOCK_DESCRIPTOR); if (idetape_queue_pc_tail(drive, &pc)) { printk(KERN_ERR "ide-tape: Can't get block descriptor\n"); - if (tape->tape_block_size == 0) { + if (tape->blk_size == 0) { printk(KERN_WARNING "ide-tape: Cannot deal with zero " "block size, assuming 32k\n"); - tape->tape_block_size = 32768; + tape->blk_size = 32768; } return; } - tape->tape_block_size = (pc.buffer[4 + 5] << 16) + + tape->blk_size = (pc.buffer[4 + 5] << 16) + (pc.buffer[4 + 6] << 8) + pc.buffer[4 + 7]; tape->drv_write_prot = (pc.buffer[2] & 0x80) >> 7; } -/* - * Our character device open function. - */ -static int idetape_chrdev_open (struct inode *inode, struct file *filp) +static int idetape_chrdev_open(struct inode *inode, struct file *filp) { unsigned int minor = iminor(inode), i = minor & ~0xc0; ide_drive_t *drive; @@ -3371,6 +3209,15 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp) idetape_pc_t pc; int retval; + if (i >= MAX_HWIFS * MAX_DRIVES) + return -ENXIO; + + tape = ide_tape_chrdev_get(i); + if (!tape) + return -ENXIO; + + debug_log(DBG_CHRDEV, "Enter %s\n", __func__); + /* * We really want to do nonseekable_open(inode, filp); here, but some * versions of tar incorrectly call lseek on tapes and bail out if that @@ -3378,16 +3225,6 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp) */ filp->f_mode &= ~(FMODE_PREAD | FMODE_PWRITE); -#if IDETAPE_DEBUG_LOG - printk(KERN_INFO "ide-tape: Reached idetape_chrdev_open\n"); -#endif /* IDETAPE_DEBUG_LOG */ - - if (i >= MAX_HWIFS * MAX_DRIVES) - return -ENXIO; - - if (!(tape = ide_tape_chrdev_get(i))) - return -ENXIO; - drive = tape->drive; filp->private_data = tape; @@ -3408,7 +3245,7 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp) if (!test_bit(IDETAPE_ADDRESS_VALID, &tape->flags)) (void)idetape_rewind_tape(drive); - if (tape->chrdev_direction != idetape_direction_read) + if (tape->chrdev_dir != IDETAPE_DIR_READ) clear_bit(IDETAPE_PIPELINE_ERROR, &tape->flags); /* Read block size and write protect status from drive. */ @@ -3430,10 +3267,8 @@ static int idetape_chrdev_open (struct inode *inode, struct file *filp) } } - /* - * Lock the tape drive door so user can't eject. - */ - if (tape->chrdev_direction == idetape_direction_none) { + /* Lock the tape drive door so user can't eject. */ + if (tape->chrdev_dir == IDETAPE_DIR_NONE) { if (idetape_create_prevent_cmd(drive, &pc, 1)) { if (!idetape_queue_pc_tail(drive, &pc)) { if (tape->door_locked != DOOR_EXPLICITLY_LOCKED) @@ -3450,14 +3285,15 @@ out_put_tape: return retval; } -static void idetape_write_release (ide_drive_t *drive, unsigned int minor) +static void idetape_write_release(ide_drive_t *drive, unsigned int minor) { idetape_tape_t *tape = drive->driver_data; idetape_empty_write_pipeline(drive); tape->merge_stage = __idetape_kmalloc_stage(tape, 1, 0); if (tape->merge_stage != NULL) { - idetape_pad_zeros(drive, tape->tape_block_size * (tape->user_bs_factor - 1)); + idetape_pad_zeros(drive, tape->blk_size * + (tape->user_bs_factor - 1)); __idetape_kfree_stage(tape->merge_stage); tape->merge_stage = NULL; } @@ -3466,10 +3302,7 @@ static void idetape_write_release (ide_drive_t *drive, unsigned int minor) idetape_flush_tape_buffers(drive); } -/* - * Our character device release function. - */ -static int idetape_chrdev_release (struct inode *inode, struct file *filp) +static int idetape_chrdev_release(struct inode *inode, struct file *filp) { struct ide_tape_obj *tape = ide_tape_f(filp); ide_drive_t *drive = tape->drive; @@ -3478,14 +3311,12 @@ static int idetape_chrdev_release (struct inode *inode, struct file *filp) lock_kernel(); tape = drive->driver_data; -#if IDETAPE_DEBUG_LOG - if (tape->debug_level >= 3) - printk(KERN_INFO "ide-tape: Reached idetape_chrdev_release\n"); -#endif /* IDETAPE_DEBUG_LOG */ - if (tape->chrdev_direction == idetape_direction_write) + debug_log(DBG_CHRDEV, "Enter %s\n", __func__); + + if (tape->chrdev_dir == IDETAPE_DIR_WRITE) idetape_write_release(drive, minor); - if (tape->chrdev_direction == idetape_direction_read) { + if (tape->chrdev_dir == IDETAPE_DIR_READ) { if (minor < 128) idetape_discard_read_pipeline(drive, 1); else @@ -3497,7 +3328,7 @@ static int idetape_chrdev_release (struct inode *inode, struct file *filp) } if (minor < 128 && test_bit(IDETAPE_MEDIUM_PRESENT, &tape->flags)) (void) idetape_rewind_tape(drive); - if (tape->chrdev_direction == idetape_direction_none) { + if (tape->chrdev_dir == IDETAPE_DIR_NONE) { if (tape->door_locked == DOOR_LOCKED) { if (idetape_create_prevent_cmd(drive, &pc, 0)) { if (!idetape_queue_pc_tail(drive, &pc)) @@ -3512,37 +3343,39 @@ static int idetape_chrdev_release (struct inode *inode, struct file *filp) } /* - * idetape_identify_device is called to check the contents of the - * ATAPI IDENTIFY command results. We return: + * check the contents of the ATAPI IDENTIFY command results. We return: * - * 1 If the tape can be supported by us, based on the information - * we have so far. + * 1 - If the tape can be supported by us, based on the information we have so + * far. * - * 0 If this tape driver is not currently supported by us. + * 0 - If this tape driver is not currently supported by us. */ -static int idetape_identify_device (ide_drive_t *drive) +static int idetape_identify_device(ide_drive_t *drive) { - struct idetape_id_gcw gcw; - struct hd_driveid *id = drive->id; + u8 gcw[2], protocol, device_type, removable, packet_size; if (drive->id_read == 0) return 1; - *((unsigned short *) &gcw) = id->config; + *((unsigned short *) &gcw) = drive->id->config; + + protocol = (gcw[1] & 0xC0) >> 6; + device_type = gcw[1] & 0x1F; + removable = !!(gcw[0] & 0x80); + packet_size = gcw[0] & 0x3; /* Check that we can support this device */ - - if (gcw.protocol != 2) + if (protocol != 2) printk(KERN_ERR "ide-tape: Protocol (0x%02x) is not ATAPI\n", - gcw.protocol); - else if (gcw.device_type != 1) + protocol); + else if (device_type != 1) printk(KERN_ERR "ide-tape: Device type (0x%02x) is not set " - "to tape\n", gcw.device_type); - else if (!gcw.removable) + "to tape\n", device_type); + else if (!removable) printk(KERN_ERR "ide-tape: The removable flag is not set\n"); - else if (gcw.packet_size != 0) { - printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12 " - "bytes long\n", gcw.packet_size); + else if (packet_size != 0) { + printk(KERN_ERR "ide-tape: Packet size (0x%02x) is not 12" + " bytes\n", packet_size); } else return 1; return 0; @@ -3550,9 +3383,9 @@ static int idetape_identify_device (ide_drive_t *drive) static void idetape_get_inquiry_results(ide_drive_t *drive) { - char *r; idetape_tape_t *tape = drive->driver_data; idetape_pc_t pc; + char fw_rev[6], vendor_id[10], product_id[18]; idetape_create_inquiry_cmd(&pc); if (idetape_queue_pc_tail(drive, &pc)) { @@ -3560,27 +3393,23 @@ static void idetape_get_inquiry_results(ide_drive_t *drive) tape->name); return; } - memcpy(tape->vendor_id, &pc.buffer[8], 8); - memcpy(tape->product_id, &pc.buffer[16], 16); - memcpy(tape->firmware_revision, &pc.buffer[32], 4); - - ide_fixstring(tape->vendor_id, 10, 0); - ide_fixstring(tape->product_id, 18, 0); - ide_fixstring(tape->firmware_revision, 6, 0); - r = tape->firmware_revision; - if (*(r + 1) == '.') - tape->firmware_revision_num = (*r - '0') * 100 + - (*(r + 2) - '0') * 10 + *(r + 3) - '0'; + memcpy(vendor_id, &pc.buffer[8], 8); + memcpy(product_id, &pc.buffer[16], 16); + memcpy(fw_rev, &pc.buffer[32], 4); + + ide_fixstring(vendor_id, 10, 0); + ide_fixstring(product_id, 18, 0); + ide_fixstring(fw_rev, 6, 0); + printk(KERN_INFO "ide-tape: %s <-> %s: %s %s rev %s\n", - drive->name, tape->name, tape->vendor_id, - tape->product_id, tape->firmware_revision); + drive->name, tape->name, vendor_id, product_id, fw_rev); } /* * Ask the tape about its various parameters. In particular, we will adjust our * data transfer buffer size to the recommended value as returned by the tape. */ -static void idetape_get_mode_sense_results (ide_drive_t *drive) +static void idetape_get_mode_sense_results(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; idetape_pc_t pc; @@ -3591,7 +3420,7 @@ static void idetape_get_mode_sense_results (ide_drive_t *drive) if (idetape_queue_pc_tail(drive, &pc)) { printk(KERN_ERR "ide-tape: Can't get tape parameters - assuming" " some default values\n"); - tape->tape_block_size = 512; + tape->blk_size = 512; put_unaligned(52, (u16 *)&tape->caps[12]); put_unaligned(540, (u16 *)&tape->caps[14]); put_unaligned(6*52, (u16 *)&tape->caps[16]); @@ -3621,62 +3450,75 @@ static void idetape_get_mode_sense_results (ide_drive_t *drive) memcpy(&tape->caps, caps, 20); if (caps[7] & 0x02) - tape->tape_block_size = 512; + tape->blk_size = 512; else if (caps[7] & 0x04) - tape->tape_block_size = 1024; + tape->blk_size = 1024; } #ifdef CONFIG_IDE_PROC_FS -static void idetape_add_settings (ide_drive_t *drive) +static void idetape_add_settings(ide_drive_t *drive) { idetape_tape_t *tape = drive->driver_data; -/* - * drive setting name read/write data type min max mul_factor div_factor data pointer set function - */ ide_add_setting(drive, "buffer", SETTING_READ, TYPE_SHORT, 0, 0xffff, 1, 2, (u16 *)&tape->caps[16], NULL); - ide_add_setting(drive, "pipeline_min", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->min_pipeline, NULL); - ide_add_setting(drive, "pipeline", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->max_stages, NULL); - ide_add_setting(drive, "pipeline_max", SETTING_RW, TYPE_INT, 1, 0xffff, tape->stage_size / 1024, 1, &tape->max_pipeline, NULL); - ide_add_setting(drive, "pipeline_used", SETTING_READ, TYPE_INT, 0, 0xffff, tape->stage_size / 1024, 1, &tape->nr_stages, NULL); - ide_add_setting(drive, "pipeline_pending", SETTING_READ, TYPE_INT, 0, 0xffff, tape->stage_size / 1024, 1, &tape->nr_pending_stages, NULL); + ide_add_setting(drive, "pipeline_min", SETTING_RW, TYPE_INT, 1, 0xffff, + tape->stage_size / 1024, 1, &tape->min_pipeline, NULL); + ide_add_setting(drive, "pipeline", SETTING_RW, TYPE_INT, 1, 0xffff, + tape->stage_size / 1024, 1, &tape->max_stages, NULL); + ide_add_setting(drive, "pipeline_max", SETTING_RW, TYPE_INT, 1, 0xffff, + tape->stage_size / 1024, 1, &tape->max_pipeline, NULL); + ide_add_setting(drive, "pipeline_used", SETTING_READ, TYPE_INT, 0, + 0xffff, tape->stage_size / 1024, 1, &tape->nr_stages, + NULL); + ide_add_setting(drive, "pipeline_pending", SETTING_READ, TYPE_INT, 0, + 0xffff, tape->stage_size / 1024, 1, + &tape->nr_pending_stages, NULL); ide_add_setting(drive, "speed", SETTING_READ, TYPE_SHORT, 0, 0xffff, 1, 1, (u16 *)&tape->caps[14], NULL); - ide_add_setting(drive, "stage", SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1024, &tape->stage_size, NULL); - ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN, IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_frequency, NULL); - ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, 1, &drive->dsc_overlap, NULL); - ide_add_setting(drive, "pipeline_head_speed_c",SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->controlled_pipeline_head_speed, NULL); - ide_add_setting(drive, "pipeline_head_speed_u",SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->uncontrolled_pipeline_head_speed,NULL); - ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff, 1, 1, &tape->avg_speed, NULL); - ide_add_setting(drive, "debug_level", SETTING_RW, TYPE_INT, 0, 0xffff, 1, 1, &tape->debug_level, NULL); + ide_add_setting(drive, "stage", SETTING_READ, TYPE_INT, 0, 0xffff, 1, + 1024, &tape->stage_size, NULL); + ide_add_setting(drive, "tdsc", SETTING_RW, TYPE_INT, IDETAPE_DSC_RW_MIN, + IDETAPE_DSC_RW_MAX, 1000, HZ, &tape->best_dsc_rw_freq, + NULL); + ide_add_setting(drive, "dsc_overlap", SETTING_RW, TYPE_BYTE, 0, 1, 1, + 1, &drive->dsc_overlap, NULL); + ide_add_setting(drive, "pipeline_head_speed_c", SETTING_READ, TYPE_INT, + 0, 0xffff, 1, 1, &tape->controlled_pipeline_head_speed, + NULL); + ide_add_setting(drive, "pipeline_head_speed_u", SETTING_READ, TYPE_INT, + 0, 0xffff, 1, 1, + &tape->uncontrolled_pipeline_head_speed, NULL); + ide_add_setting(drive, "avg_speed", SETTING_READ, TYPE_INT, 0, 0xffff, + 1, 1, &tape->avg_speed, NULL); + ide_add_setting(drive, "debug_mask", SETTING_RW, TYPE_INT, 0, 0xffff, 1, + 1, &tape->debug_mask, NULL); } #else static inline void idetape_add_settings(ide_drive_t *drive) { ; } #endif /* - * ide_setup is called to: + * The function below is called to: * - * 1. Initialize our various state variables. - * 2. Ask the tape for its capabilities. - * 3. Allocate a buffer which will be used for data - * transfer. The buffer size is chosen based on - * the recommendation which we received in step (2). + * 1. Initialize our various state variables. + * 2. Ask the tape for its capabilities. + * 3. Allocate a buffer which will be used for data transfer. The buffer size + * is chosen based on the recommendation which we received in step 2. * - * Note that at this point ide.c already assigned us an irq, so that - * we can queue requests here and wait for their completion. + * Note that at this point ide.c already assigned us an irq, so that we can + * queue requests here and wait for their completion. */ -static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) +static void idetape_setup(ide_drive_t *drive, idetape_tape_t *tape, int minor) { unsigned long t1, tmid, tn, t; int speed; - struct idetape_id_gcw gcw; int stage_size; + u8 gcw[2]; struct sysinfo si; u16 *ctl = (u16 *)&tape->caps[12]; - spin_lock_init(&tape->spinlock); + spin_lock_init(&tape->lock); drive->dsc_overlap = 1; if (drive->hwif->host_flags & IDE_HFLAG_NO_DSC) { printk(KERN_INFO "ide-tape: %s: disabling DSC overlap\n", @@ -3690,25 +3532,29 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->name[0] = 'h'; tape->name[1] = 't'; tape->name[2] = '0' + minor; - tape->chrdev_direction = idetape_direction_none; + tape->chrdev_dir = IDETAPE_DIR_NONE; tape->pc = tape->pc_stack; tape->max_insert_speed = 10000; tape->speed_control = 1; *((unsigned short *) &gcw) = drive->id->config; - if (gcw.drq_type == 1) + + /* Command packet DRQ type */ + if (((gcw[0] & 0x60) >> 5) == 1) set_bit(IDETAPE_DRQ_INTERRUPT, &tape->flags); - tape->min_pipeline = tape->max_pipeline = tape->max_stages = 10; - + tape->min_pipeline = 10; + tape->max_pipeline = 10; + tape->max_stages = 10; + idetape_get_inquiry_results(drive); idetape_get_mode_sense_results(drive); ide_tape_get_bsize_from_bdesc(drive); tape->user_bs_factor = 1; - tape->stage_size = *ctl * tape->tape_block_size; + tape->stage_size = *ctl * tape->blk_size; while (tape->stage_size > 0xffff) { printk(KERN_NOTICE "ide-tape: decreasing stage size\n"); *ctl /= 2; - tape->stage_size = *ctl * tape->tape_block_size; + tape->stage_size = *ctl * tape->blk_size; } stage_size = tape->stage_size; tape->pages_per_stage = stage_size / PAGE_SIZE; @@ -3722,17 +3568,22 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) tape->max_stages = speed * 1000 * 10 / tape->stage_size; - /* - * Limit memory use for pipeline to 10% of physical memory - */ + /* Limit memory use for pipeline to 10% of physical memory */ si_meminfo(&si); - if (tape->max_stages * tape->stage_size > si.totalram * si.mem_unit / 10) - tape->max_stages = si.totalram * si.mem_unit / (10 * tape->stage_size); + if (tape->max_stages * tape->stage_size > + si.totalram * si.mem_unit / 10) + tape->max_stages = + si.totalram * si.mem_unit / (10 * tape->stage_size); + tape->max_stages = min(tape->max_stages, IDETAPE_MAX_PIPELINE_STAGES); tape->min_pipeline = min(tape->max_stages, IDETAPE_MIN_PIPELINE_STAGES); - tape->max_pipeline = min(tape->max_stages * 2, IDETAPE_MAX_PIPELINE_STAGES); - if (tape->max_stages == 0) - tape->max_stages = tape->min_pipeline = tape->max_pipeline = 1; + tape->max_pipeline = + min(tape->max_stages * 2, IDETAPE_MAX_PIPELINE_STAGES); + if (tape->max_stages == 0) { + tape->max_stages = 1; + tape->min_pipeline = 1; + tape->max_pipeline = 1; + } t1 = (tape->stage_size * HZ) / (speed * 1000); tmid = (*(u16 *)&tape->caps[16] * 32 * HZ) / (speed * 125); @@ -3744,17 +3595,19 @@ static void idetape_setup (ide_drive_t *drive, idetape_tape_t *tape, int minor) t = t1; /* - * Ensure that the number we got makes sense; limit - * it within IDETAPE_DSC_RW_MIN and IDETAPE_DSC_RW_MAX. + * Ensure that the number we got makes sense; limit it within + * IDETAPE_DSC_RW_MIN and IDETAPE_DSC_RW_MAX. */ - tape->best_dsc_rw_frequency = max_t(unsigned long, min_t(unsigned long, t, IDETAPE_DSC_RW_MAX), IDETAPE_DSC_RW_MIN); + tape->best_dsc_rw_freq = max_t(unsigned long, + min_t(unsigned long, t, IDETAPE_DSC_RW_MAX), + IDETAPE_DSC_RW_MIN); printk(KERN_INFO "ide-tape: %s <-> %s: %dKBps, %d*%dkB buffer, " "%dkB pipeline, %lums tDSC%s\n", drive->name, tape->name, *(u16 *)&tape->caps[14], (*(u16 *)&tape->caps[16] * 512) / tape->stage_size, tape->stage_size / 1024, tape->max_stages * tape->stage_size / 1024, - tape->best_dsc_rw_frequency * 1000 / HZ, + tape->best_dsc_rw_freq * 1000 / HZ, drive->using_dma ? ", DMA":""); idetape_add_settings(drive); @@ -3782,7 +3635,8 @@ static void ide_tape_release(struct kref *kref) drive->dsc_overlap = 0; drive->driver_data = NULL; device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor)); - device_destroy(idetape_sysfs_class, MKDEV(IDETAPE_MAJOR, tape->minor + 128)); + device_destroy(idetape_sysfs_class, + MKDEV(IDETAPE_MAJOR, tape->minor + 128)); idetape_devs[tape->minor] = NULL; g->private_data = NULL; put_disk(g); @@ -3831,9 +3685,7 @@ static ide_driver_t idetape_driver = { #endif }; -/* - * Our character device supporting functions, passed to register_chrdev. - */ +/* Our character device supporting functions, passed to register_chrdev. */ static const struct file_operations idetape_fops = { .owner = THIS_MODULE, .read = idetape_chrdev_read, @@ -3848,7 +3700,8 @@ static int idetape_open(struct inode *inode, struct file *filp) struct gendisk *disk = inode->i_bdev->bd_disk; struct ide_tape_obj *tape; - if (!(tape = ide_tape_get(disk))) + tape = ide_tape_get(disk); + if (!tape) return -ENXIO; return 0; @@ -3895,21 +3748,20 @@ static int ide_tape_probe(ide_drive_t *drive) goto failed; if (drive->media != ide_tape) goto failed; - if (!idetape_identify_device (drive)) { - printk(KERN_ERR "ide-tape: %s: not supported by this version of ide-tape\n", drive->name); + if (!idetape_identify_device(drive)) { + printk(KERN_ERR "ide-tape: %s: not supported by this version of" + " the driver\n", drive->name); goto failed; } if (drive->scsi) { - printk("ide-tape: passing drive %s to ide-scsi emulation.\n", drive->name); + printk(KERN_INFO "ide-tape: passing drive %s to ide-scsi" + " emulation.\n", drive->name); goto failed; } - if (strstr(drive->id->model, "OnStream DI-")) { - printk(KERN_WARNING "ide-tape: Use drive %s with ide-scsi emulation and osst.\n", drive->name); - printk(KERN_WARNING "ide-tape: OnStream support will be removed soon from ide-tape!\n"); - } - tape = kzalloc(sizeof (idetape_tape_t), GFP_KERNEL); + tape = kzalloc(sizeof(idetape_tape_t), GFP_KERNEL); if (tape == NULL) { - printk(KERN_ERR "ide-tape: %s: Can't allocate a tape structure\n", drive->name); + printk(KERN_ERR "ide-tape: %s: Can't allocate a tape struct\n", + drive->name); goto failed; } @@ -3955,10 +3807,7 @@ failed: return -ENODEV; } -MODULE_DESCRIPTION("ATAPI Streaming TAPE Driver"); -MODULE_LICENSE("GPL"); - -static void __exit idetape_exit (void) +static void __exit idetape_exit(void) { driver_unregister(&idetape_driver.gen_driver); class_destroy(idetape_sysfs_class); @@ -3977,7 +3826,8 @@ static int __init idetape_init(void) } if (register_chrdev(IDETAPE_MAJOR, "ht", &idetape_fops)) { - printk(KERN_ERR "ide-tape: Failed to register character device interface\n"); + printk(KERN_ERR "ide-tape: Failed to register chrdev" + " interface\n"); error = -EBUSY; goto out_free_class; } @@ -4000,3 +3850,5 @@ MODULE_ALIAS("ide:*m-tape*"); module_init(idetape_init); module_exit(idetape_exit); MODULE_ALIAS_CHARDEV_MAJOR(IDETAPE_MAJOR); +MODULE_DESCRIPTION("ATAPI Streaming TAPE Driver"); +MODULE_LICENSE("GPL"); diff --git a/drivers/ide/ide-taskfile.c b/drivers/ide/ide-taskfile.c index 4e1da1c78cb..0518a2e948c 100644 --- a/drivers/ide/ide-taskfile.c +++ b/drivers/ide/ide-taskfile.c @@ -189,12 +189,11 @@ EXPORT_SYMBOL_GPL(do_rw_taskfile); */ static ide_startstop_t set_multmode_intr(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - u8 stat; + u8 stat = ide_read_status(drive); - if (OK_STAT(stat = hwif->INB(IDE_STATUS_REG),READY_STAT,BAD_STAT)) { + if (OK_STAT(stat, READY_STAT, BAD_STAT)) drive->mult_count = drive->mult_req; - } else { + else { drive->mult_req = drive->mult_count = 0; drive->special.b.recalibrate = 1; (void) ide_dump_status(drive, "set_multmode", stat); @@ -207,11 +206,10 @@ static ide_startstop_t set_multmode_intr(ide_drive_t *drive) */ static ide_startstop_t set_geometry_intr(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); int retries = 5; u8 stat; - while (((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) && retries--) + while (((stat = ide_read_status(drive)) & BUSY_STAT) && retries--) udelay(10); if (OK_STAT(stat, READY_STAT, BAD_STAT)) @@ -230,10 +228,9 @@ static ide_startstop_t set_geometry_intr(ide_drive_t *drive) */ static ide_startstop_t recal_intr(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); - u8 stat; + u8 stat = ide_read_status(drive); - if (!OK_STAT(stat = hwif->INB(IDE_STATUS_REG), READY_STAT, BAD_STAT)) + if (!OK_STAT(stat, READY_STAT, BAD_STAT)) return ide_error(drive, "recal_intr", stat); return ide_stopped; } @@ -244,23 +241,23 @@ static ide_startstop_t recal_intr(ide_drive_t *drive) static ide_startstop_t task_no_data_intr(ide_drive_t *drive) { ide_task_t *args = HWGROUP(drive)->rq->special; - ide_hwif_t *hwif = HWIF(drive); u8 stat; local_irq_enable_in_hardirq(); - if (!OK_STAT(stat = hwif->INB(IDE_STATUS_REG),READY_STAT,BAD_STAT)) { + stat = ide_read_status(drive); + + if (!OK_STAT(stat, READY_STAT, BAD_STAT)) return ide_error(drive, "task_no_data_intr", stat); /* calls ide_end_drive_cmd */ - } + if (args) - ide_end_drive_cmd(drive, stat, hwif->INB(IDE_ERROR_REG)); + ide_end_drive_cmd(drive, stat, ide_read_error(drive)); return ide_stopped; } static u8 wait_drive_not_busy(ide_drive_t *drive) { - ide_hwif_t *hwif = HWIF(drive); int retries; u8 stat; @@ -269,7 +266,9 @@ static u8 wait_drive_not_busy(ide_drive_t *drive) * This can take up to 10 usec, but we will wait max 1 ms. */ for (retries = 0; retries < 100; retries++) { - if ((stat = hwif->INB(IDE_STATUS_REG)) & BUSY_STAT) + stat = ide_read_status(drive); + + if (stat & BUSY_STAT) udelay(10); else break; @@ -408,7 +407,7 @@ static ide_startstop_t task_error(ide_drive_t *drive, struct request *rq, void task_end_request(ide_drive_t *drive, struct request *rq, u8 stat) { if (rq->cmd_type == REQ_TYPE_ATA_TASKFILE) { - u8 err = drive->hwif->INB(IDE_ERROR_REG); + u8 err = ide_read_error(drive); ide_end_drive_cmd(drive, stat, err); return; @@ -430,7 +429,7 @@ static ide_startstop_t task_in_intr(ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; struct request *rq = HWGROUP(drive)->rq; - u8 stat = hwif->INB(IDE_STATUS_REG); + u8 stat = ide_read_status(drive); /* new way for dealing with premature shared PCI interrupts */ if (!OK_STAT(stat, DRQ_STAT, BAD_R_STAT)) { @@ -465,7 +464,7 @@ static ide_startstop_t task_out_intr (ide_drive_t *drive) { ide_hwif_t *hwif = drive->hwif; struct request *rq = HWGROUP(drive)->rq; - u8 stat = hwif->INB(IDE_STATUS_REG); + u8 stat = ide_read_status(drive); if (!OK_STAT(stat, DRIVE_READY, drive->bad_wstat)) return task_error(drive, rq, __FUNCTION__, stat); diff --git a/drivers/ide/ide.c b/drivers/ide/ide.c index ac613600161..ad0e9955f73 100644 --- a/drivers/ide/ide.c +++ b/drivers/ide/ide.c @@ -618,60 +618,6 @@ abort: EXPORT_SYMBOL(ide_unregister); - -/** - * ide_setup_ports - set up IDE interface ports - * @hw: register descriptions - * @base: base register - * @offsets: table of register offsets - * @ctrl: control register - * @ack_irq: IRQ ack - * @irq: interrupt lie - * - * Setup hw_regs_t structure described by parameters. You - * may set up the hw structure yourself OR use this routine to - * do it for you. This is basically a helper - * - */ - -void ide_setup_ports ( hw_regs_t *hw, - unsigned long base, int *offsets, - unsigned long ctrl, unsigned long intr, - ide_ack_intr_t *ack_intr, -/* - * ide_io_ops_t *iops, - */ - int irq) -{ - int i; - - memset(hw, 0, sizeof(hw_regs_t)); - for (i = 0; i < IDE_NR_PORTS; i++) { - if (offsets[i] == -1) { - switch(i) { - case IDE_CONTROL_OFFSET: - hw->io_ports[i] = ctrl; - break; -#if defined(CONFIG_AMIGA) || defined(CONFIG_MAC) - case IDE_IRQ_OFFSET: - hw->io_ports[i] = intr; - break; -#endif /* (CONFIG_AMIGA) || (CONFIG_MAC) */ - default: - hw->io_ports[i] = 0; - break; - } - } else { - hw->io_ports[i] = base + offsets[i]; - } - } - hw->irq = irq; - hw->ack_intr = ack_intr; -/* - * hw->iops = iops; - */ -} - void ide_init_port_hw(ide_hwif_t *hwif, hw_regs_t *hw) { memcpy(hwif->io_ports, hw->io_ports, sizeof(hwif->io_ports)); diff --git a/drivers/ide/legacy/buddha.c b/drivers/ide/legacy/buddha.c index 8bdb79da17e..50ffa871d5e 100644 --- a/drivers/ide/legacy/buddha.c +++ b/drivers/ide/legacy/buddha.c @@ -56,31 +56,11 @@ static u_int xsurf_bases[XSURF_NUM_HWIFS] __initdata = { XSURF_BASE1, XSURF_BASE2 }; - /* * Offsets from one of the above bases */ -#define BUDDHA_DATA 0x00 -#define BUDDHA_ERROR 0x06 /* see err-bits */ -#define BUDDHA_NSECTOR 0x0a /* nr of sectors to read/write */ -#define BUDDHA_SECTOR 0x0e /* starting sector */ -#define BUDDHA_LCYL 0x12 /* starting cylinder */ -#define BUDDHA_HCYL 0x16 /* high byte of starting cyl */ -#define BUDDHA_SELECT 0x1a /* 101dhhhh , d=drive, hhhh=head */ -#define BUDDHA_STATUS 0x1e /* see status-bits */ #define BUDDHA_CONTROL 0x11a -#define XSURF_CONTROL -1 /* X-Surf has no CS1* (Control/AltStat) */ - -static int buddha_offsets[IDE_NR_PORTS] __initdata = { - BUDDHA_DATA, BUDDHA_ERROR, BUDDHA_NSECTOR, BUDDHA_SECTOR, BUDDHA_LCYL, - BUDDHA_HCYL, BUDDHA_SELECT, BUDDHA_STATUS, BUDDHA_CONTROL, -1 -}; - -static int xsurf_offsets[IDE_NR_PORTS] __initdata = { - BUDDHA_DATA, BUDDHA_ERROR, BUDDHA_NSECTOR, BUDDHA_SECTOR, BUDDHA_LCYL, - BUDDHA_HCYL, BUDDHA_SELECT, BUDDHA_STATUS, XSURF_CONTROL, -1 -}; /* * Other registers @@ -140,6 +120,26 @@ static int xsurf_ack_intr(ide_hwif_t *hwif) return 1; } +static void __init buddha_setup_ports(hw_regs_t *hw, unsigned long base, + unsigned long ctl, unsigned long irq_port, + ide_ack_intr_t *ack_intr) +{ + int i; + + memset(hw, 0, sizeof(*hw)); + + hw->io_ports[IDE_DATA_OFFSET] = base; + + for (i = 1; i < 8; i++) + hw->io_ports[i] = base + 2 + i * 4; + + hw->io_ports[IDE_CONTROL_OFFSET] = ctl; + hw->io_ports[IDE_IRQ_OFFSET] = irq_port; + + hw->irq = IRQ_AMIGA_PORTS; + hw->ack_intr = ack_intr; +} + /* * Probe for a Buddha or Catweasel IDE interface */ @@ -202,22 +202,24 @@ fail_base2: printk(KERN_INFO "ide: %s IDE controller\n", buddha_board_name[type]); - for(i=0;i<buddha_num_hwifs;i++) { - if(type != BOARD_XSURF) { - ide_setup_ports(&hw, (buddha_board+buddha_bases[i]), - buddha_offsets, 0, - (buddha_board+buddha_irqports[i]), - buddha_ack_intr, -// budda_iops, - IRQ_AMIGA_PORTS); + for (i = 0; i < buddha_num_hwifs; i++) { + unsigned long base, ctl, irq_port; + ide_ack_intr_t *ack_intr; + + if (type != BOARD_XSURF) { + base = buddha_board + buddha_bases[i]; + ctl = base + BUDDHA_CONTROL; + irq_port = buddha_board + buddha_irqports[i]; + ack_intr = buddha_ack_intr; } else { - ide_setup_ports(&hw, (buddha_board+xsurf_bases[i]), - xsurf_offsets, 0, - (buddha_board+xsurf_irqports[i]), - xsurf_ack_intr, -// xsurf_iops, - IRQ_AMIGA_PORTS); - } + base = buddha_board + xsurf_bases[i]; + /* X-Surf has no CS1* (Control/AltStat) */ + ctl = 0; + irq_port = buddha_board + xsurf_irqports[i]; + ack_intr = xsurf_ack_intr; + } + + buddha_setup_ports(&hw, base, ctl, irq_port, ack_intr); hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); if (hwif) { diff --git a/drivers/ide/legacy/falconide.c b/drivers/ide/legacy/falconide.c index 85b69a82825..f044048903b 100644 --- a/drivers/ide/legacy/falconide.c +++ b/drivers/ide/legacy/falconide.c @@ -33,22 +33,8 @@ * Offsets from the above base */ -#define ATA_HD_DATA 0x00 -#define ATA_HD_ERROR 0x05 /* see err-bits */ -#define ATA_HD_NSECTOR 0x09 /* nr of sectors to read/write */ -#define ATA_HD_SECTOR 0x0d /* starting sector */ -#define ATA_HD_LCYL 0x11 /* starting cylinder */ -#define ATA_HD_HCYL 0x15 /* high byte of starting cyl */ -#define ATA_HD_SELECT 0x19 /* 101dhhhh , d=drive, hhhh=head */ -#define ATA_HD_STATUS 0x1d /* see status-bits */ #define ATA_HD_CONTROL 0x39 -static int falconide_offsets[IDE_NR_PORTS] __initdata = { - ATA_HD_DATA, ATA_HD_ERROR, ATA_HD_NSECTOR, ATA_HD_SECTOR, ATA_HD_LCYL, - ATA_HD_HCYL, ATA_HD_SELECT, ATA_HD_STATUS, ATA_HD_CONTROL, -1 -}; - - /* * falconide_intr_lock is used to obtain access to the IDE interrupt, * which is shared between several drivers. @@ -57,6 +43,22 @@ static int falconide_offsets[IDE_NR_PORTS] __initdata = { int falconide_intr_lock; EXPORT_SYMBOL(falconide_intr_lock); +static void __init falconide_setup_ports(hw_regs_t *hw) +{ + int i; + + memset(hw, 0, sizeof(*hw)); + + hw->io_ports[IDE_DATA_OFFSET] = ATA_HD_BASE; + + for (i = 1; i < 8; i++) + hw->io_ports[i] = ATA_HD_BASE + 1 + i * 4; + + hw->io_ports[IDE_CONTROL_OFFSET] = ATA_HD_CONTROL; + + hw->irq = IRQ_MFP_IDE; + hw->ack_intr = NULL; +} /* * Probe for a Falcon IDE interface @@ -64,16 +66,15 @@ EXPORT_SYMBOL(falconide_intr_lock); static int __init falconide_init(void) { - if (MACH_IS_ATARI && ATARIHW_PRESENT(IDE)) { hw_regs_t hw; ide_hwif_t *hwif; + if (!MACH_IS_ATARI || !ATARIHW_PRESENT(IDE)) + return 0; + printk(KERN_INFO "ide: Falcon IDE controller\n"); - ide_setup_ports(&hw, ATA_HD_BASE, falconide_offsets, - 0, 0, NULL, -// falconide_iops, - IRQ_MFP_IDE); + falconide_setup_ports(&hw); hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); if (hwif) { @@ -85,9 +86,8 @@ static int __init falconide_init(void) ide_device_add(idx, NULL); } - } - return 0; + return 0; } module_init(falconide_init); diff --git a/drivers/ide/legacy/gayle.c b/drivers/ide/legacy/gayle.c index fc29ce75aff..9d3851d2767 100644 --- a/drivers/ide/legacy/gayle.c +++ b/drivers/ide/legacy/gayle.c @@ -34,22 +34,8 @@ * Offsets from one of the above bases */ -#define GAYLE_DATA 0x00 -#define GAYLE_ERROR 0x06 /* see err-bits */ -#define GAYLE_NSECTOR 0x0a /* nr of sectors to read/write */ -#define GAYLE_SECTOR 0x0e /* starting sector */ -#define GAYLE_LCYL 0x12 /* starting cylinder */ -#define GAYLE_HCYL 0x16 /* high byte of starting cyl */ -#define GAYLE_SELECT 0x1a /* 101dhhhh , d=drive, hhhh=head */ -#define GAYLE_STATUS 0x1e /* see status-bits */ #define GAYLE_CONTROL 0x101a -static int gayle_offsets[IDE_NR_PORTS] __initdata = { - GAYLE_DATA, GAYLE_ERROR, GAYLE_NSECTOR, GAYLE_SECTOR, GAYLE_LCYL, - GAYLE_HCYL, GAYLE_SELECT, GAYLE_STATUS, -1, -1 -}; - - /* * These are at different offsets from the base */ @@ -106,6 +92,26 @@ static int gayle_ack_intr_a1200(ide_hwif_t *hwif) return 1; } +static void __init gayle_setup_ports(hw_regs_t *hw, unsigned long base, + unsigned long ctl, unsigned long irq_port, + ide_ack_intr_t *ack_intr); +{ + int i; + + memset(hw, 0, sizeof(*hw)); + + hw->io_ports[IDE_DATA_OFFSET] = base; + + for (i = 1; i < 8; i++) + hw->io_ports[i] = base + 2 + i * 4; + + hw->io_ports[IDE_CONTROL_OFFSET] = ctl; + hw->io_ports[IDE_IRQ_OFFSET] = irq_port; + + hw->irq = IRQ_AMIGA_PORTS; + hw->ack_intr = ack_intr; +} + /* * Probe for a Gayle IDE interface (and optionally for an IDE doubler) */ @@ -167,10 +173,7 @@ found: base = (unsigned long)ZTWO_VADDR(phys_base); ctrlport = GAYLE_HAS_CONTROL_REG ? (base + GAYLE_CONTROL) : 0; - ide_setup_ports(&hw, base, gayle_offsets, - ctrlport, irqport, ack_intr, -// &gayle_iops, - IRQ_AMIGA_PORTS); + gayle_setup_ports(&hw, base, ctrlport, irqport, ack_intr); hwif = ide_find_port(base); if (hwif) { diff --git a/drivers/ide/legacy/hd.c b/drivers/ide/legacy/hd.c index 8e05d88e81b..0b0d8673192 100644 --- a/drivers/ide/legacy/hd.c +++ b/drivers/ide/legacy/hd.c @@ -421,11 +421,14 @@ static void bad_rw_intr(void) static inline int wait_DRQ(void) { - int retries = 100000, stat; + int retries; + int stat; - while (--retries > 0) - if ((stat = inb_p(HD_STATUS)) & DRQ_STAT) + for (retries = 0; retries < 100000; retries++) { + stat = inb_p(HD_STATUS); + if (stat & DRQ_STAT) return 0; + } dump_status("wait_DRQ", stat); return -1; } diff --git a/drivers/ide/legacy/macide.c b/drivers/ide/legacy/macide.c index 06df8df857a..a61e60737dc 100644 --- a/drivers/ide/legacy/macide.c +++ b/drivers/ide/legacy/macide.c @@ -31,14 +31,6 @@ * These match MkLinux so they should be correct. */ -#define IDE_DATA 0x00 -#define IDE_ERROR 0x04 /* see err-bits */ -#define IDE_NSECTOR 0x08 /* nr of sectors to read/write */ -#define IDE_SECTOR 0x0c /* starting sector */ -#define IDE_LCYL 0x10 /* starting cylinder */ -#define IDE_HCYL 0x14 /* high byte of starting cyl */ -#define IDE_SELECT 0x18 /* 101dhhhh , d=drive, hhhh=head */ -#define IDE_STATUS 0x1c /* see status-bits */ #define IDE_CONTROL 0x38 /* control/altstatus */ /* @@ -63,11 +55,6 @@ volatile unsigned char *ide_ifr = (unsigned char *) (IDE_BASE + IDE_IFR); -static int macide_offsets[IDE_NR_PORTS] = { - IDE_DATA, IDE_ERROR, IDE_NSECTOR, IDE_SECTOR, IDE_LCYL, - IDE_HCYL, IDE_SELECT, IDE_STATUS, IDE_CONTROL -}; - int macide_ack_intr(ide_hwif_t* hwif) { if (*ide_ifr & 0x20) { @@ -77,6 +64,22 @@ int macide_ack_intr(ide_hwif_t* hwif) return 0; } +static void __init macide_setup_ports(hw_regs_t *hw, unsigned long base, + int irq, ide_ack_intr_t *ack_intr) +{ + int i; + + memset(hw, 0, sizeof(*hw)); + + for (i = 0; i < 8; i++) + hw->io_ports[i] = base + i * 4; + + hw->io_ports[IDE_CONTROL_OFFSET] = IDE_CONTROL; + + hw->irq = irq; + hw->ack_intr = ack_intr; +} + static const char *mac_ide_name[] = { "Quadra", "Powerbook", "Powerbook Baboon" }; @@ -86,27 +89,27 @@ static const char *mac_ide_name[] = static int __init macide_init(void) { - hw_regs_t hw; ide_hwif_t *hwif; + ide_ack_intr_t *ack_intr; + unsigned long base; + int irq; + hw_regs_t hw; switch (macintosh_config->ide_type) { case MAC_IDE_QUADRA: - ide_setup_ports(&hw, IDE_BASE, macide_offsets, - 0, 0, macide_ack_intr, -// quadra_ide_iops, - IRQ_NUBUS_F); + base = IDE_BASE; + ack_intr = macide_ack_intr; + irq = IRQ_NUBUS_F; break; case MAC_IDE_PB: - ide_setup_ports(&hw, IDE_BASE, macide_offsets, - 0, 0, macide_ack_intr, -// macide_pb_iops, - IRQ_NUBUS_C); + base = IDE_BASE; + ack_intr = macide_ack_intr; + irq = IRQ_NUBUS_C; break; case MAC_IDE_BABOON: - ide_setup_ports(&hw, BABOON_BASE, macide_offsets, - 0, 0, NULL, -// macide_baboon_iops, - IRQ_BABOON_1); + base = BABOON_BASE; + ack_intr = NULL; + irq = IRQ_BABOON_1; break; default: return -ENODEV; @@ -115,6 +118,8 @@ static int __init macide_init(void) printk(KERN_INFO "ide: Macintosh %s IDE controller\n", mac_ide_name[macintosh_config->ide_type - 1]); + macide_setup_ports(&hw, base, irq, ack_intr); + hwif = ide_find_port(hw.io_ports[IDE_DATA_OFFSET]); if (hwif) { u8 index = hwif->index; diff --git a/drivers/ide/legacy/q40ide.c b/drivers/ide/legacy/q40ide.c index 2f0b34d892a..1381b91bc31 100644 --- a/drivers/ide/legacy/q40ide.c +++ b/drivers/ide/legacy/q40ide.c @@ -66,16 +66,12 @@ static int q40ide_default_irq(unsigned long base) /* - * This is very similar to ide_setup_ports except that addresses - * are pretranslated for q40 ISA access + * Addresses are pretranslated for Q40 ISA access. */ void q40_ide_setup_ports ( hw_regs_t *hw, unsigned long base, int *offsets, unsigned long ctrl, unsigned long intr, ide_ack_intr_t *ack_intr, -/* - * ide_io_ops_t *iops, - */ int irq) { int i; @@ -92,9 +88,6 @@ void q40_ide_setup_ports ( hw_regs_t *hw, hw->irq = irq; hw->ack_intr = ack_intr; -/* - * hw->iops = iops; - */ } diff --git a/drivers/ide/pci/Makefile b/drivers/ide/pci/Makefile index 94803253e8a..02e6ee7d751 100644 --- a/drivers/ide/pci/Makefile +++ b/drivers/ide/pci/Makefile @@ -34,7 +34,8 @@ obj-$(CONFIG_BLK_DEV_TRM290) += trm290.o obj-$(CONFIG_BLK_DEV_VIA82CXXX) += via82cxxx.o # Must appear at the end of the block -obj-$(CONFIG_BLK_DEV_GENERIC) += generic.o +obj-$(CONFIG_BLK_DEV_GENERIC) += ide-pci-generic.o +ide-pci-generic-y += generic.o ifeq ($(CONFIG_BLK_DEV_CMD640), m) obj-m += cmd640.o diff --git a/drivers/ide/pci/generic.c b/drivers/ide/pci/generic.c index 9262a9174b4..7fd83a9d4de 100644 --- a/drivers/ide/pci/generic.c +++ b/drivers/ide/pci/generic.c @@ -29,19 +29,6 @@ static int ide_generic_all; /* Set to claim all devices */ -/* - * the module_param_named() was added for the modular case - * the __setup() is left as compatibility for existing setups - */ -#ifndef MODULE -static int __init ide_generic_all_on(char *unused) -{ - ide_generic_all = 1; - printk(KERN_INFO "IDE generic will claim all unknown PCI IDE storage controllers.\n"); - return 1; -} -const __setup("all-generic-ide", ide_generic_all_on); -#endif module_param_named(all_generic_ide, ide_generic_all, bool, 0444); MODULE_PARM_DESC(all_generic_ide, "IDE generic will claim all unknown PCI IDE storage controllers."); diff --git a/drivers/ide/pci/siimage.c b/drivers/ide/pci/siimage.c index ef5b39fa042..cc4be9621bc 100644 --- a/drivers/ide/pci/siimage.c +++ b/drivers/ide/pci/siimage.c @@ -704,9 +704,6 @@ static void __devinit init_mmio_iops_siimage(ide_hwif_t *hwif) hwif->sata_scr[SATA_STATUS_OFFSET] = base + 0x104; hwif->sata_scr[SATA_ERROR_OFFSET] = base + 0x108; hwif->sata_scr[SATA_CONTROL_OFFSET] = base + 0x100; - hwif->sata_misc[SATA_MISC_OFFSET] = base + 0x140; - hwif->sata_misc[SATA_PHY_OFFSET] = base + 0x144; - hwif->sata_misc[SATA_IEN_OFFSET] = base + 0x148; } memcpy(hwif->io_ports, hw.io_ports, sizeof(hwif->io_ports)); diff --git a/drivers/macintosh/mediabay.c b/drivers/macintosh/mediabay.c index de9ebbfbf12..936788272a5 100644 --- a/drivers/macintosh/mediabay.c +++ b/drivers/macintosh/mediabay.c @@ -78,12 +78,14 @@ struct media_bay_info { int cached_gpio; int sleeping; struct semaphore lock; -#ifdef CONFIG_BLK_DEV_IDE +#ifdef CONFIG_BLK_DEV_IDE_PMAC void __iomem *cd_base; - int cd_index; int cd_irq; int cd_retry; #endif +#if defined(CONFIG_BLK_DEV_IDE_PMAC) || defined(CONFIG_MAC_FLOPPY) + int cd_index; +#endif }; #define MAX_BAYS 2 @@ -91,7 +93,7 @@ struct media_bay_info { static struct media_bay_info media_bays[MAX_BAYS]; int media_bay_count = 0; -#ifdef CONFIG_BLK_DEV_IDE +#ifdef CONFIG_BLK_DEV_IDE_PMAC /* check the busy bit in the media-bay ide interface (assumes the media-bay contains an ide device) */ #define MB_IDE_READY(i) ((readb(media_bays[i].cd_base + 0x70) & 0x80) == 0) @@ -401,7 +403,7 @@ static void poll_media_bay(struct media_bay_info* bay) set_mb_power(bay, id != MB_NO); bay->content_id = id; if (id == MB_NO) { -#ifdef CONFIG_BLK_DEV_IDE +#ifdef CONFIG_BLK_DEV_IDE_PMAC bay->cd_retry = 0; #endif printk(KERN_INFO "media bay %d is empty\n", bay->index); @@ -414,9 +416,9 @@ static void poll_media_bay(struct media_bay_info* bay) } } +#ifdef CONFIG_MAC_FLOPPY int check_media_bay(struct device_node *which_bay, int what) { -#ifdef CONFIG_BLK_DEV_IDE int i; for (i=0; i<media_bay_count; i++) @@ -426,14 +428,14 @@ int check_media_bay(struct device_node *which_bay, int what) media_bays[i].cd_index = -1; return -EINVAL; } -#endif /* CONFIG_BLK_DEV_IDE */ return -ENODEV; } EXPORT_SYMBOL(check_media_bay); +#endif /* CONFIG_MAC_FLOPPY */ +#ifdef CONFIG_BLK_DEV_IDE_PMAC int check_media_bay_by_base(unsigned long base, int what) { -#ifdef CONFIG_BLK_DEV_IDE int i; for (i=0; i<media_bay_count; i++) @@ -443,15 +445,13 @@ int check_media_bay_by_base(unsigned long base, int what) media_bays[i].cd_index = -1; return -EINVAL; } -#endif - + return -ENODEV; } int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base, - int irq, int index) + int irq, int index) { -#ifdef CONFIG_BLK_DEV_IDE int i; for (i=0; i<media_bay_count; i++) { @@ -483,10 +483,10 @@ int media_bay_set_ide_infos(struct device_node* which_bay, unsigned long base, return -ENODEV; } } -#endif /* CONFIG_BLK_DEV_IDE */ - + return -ENODEV; } +#endif /* CONFIG_BLK_DEV_IDE_PMAC */ static void media_bay_step(int i) { @@ -521,14 +521,13 @@ static void media_bay_step(int i) bay->state = mb_resetting; MBDBG("mediabay%d: waiting reset (kind:%d)\n", i, bay->content_id); break; - case mb_resetting: if (bay->content_id != MB_CD) { MBDBG("mediabay%d: bay is up (kind:%d)\n", i, bay->content_id); bay->state = mb_up; break; } -#ifdef CONFIG_BLK_DEV_IDE +#ifdef CONFIG_BLK_DEV_IDE_PMAC MBDBG("mediabay%d: waiting IDE reset (kind:%d)\n", i, bay->content_id); bay->ops->un_reset_ide(bay); bay->timer = msecs_to_jiffies(MB_IDE_WAIT); @@ -536,16 +535,14 @@ static void media_bay_step(int i) #else printk(KERN_DEBUG "media-bay %d is ide (not compiled in kernel)\n", i); set_mb_power(bay, 0); -#endif /* CONFIG_BLK_DEV_IDE */ +#endif /* CONFIG_BLK_DEV_IDE_PMAC */ break; - -#ifdef CONFIG_BLK_DEV_IDE +#ifdef CONFIG_BLK_DEV_IDE_PMAC case mb_ide_resetting: bay->timer = msecs_to_jiffies(MB_IDE_TIMEOUT); bay->state = mb_ide_waiting; MBDBG("mediabay%d: waiting IDE ready (kind:%d)\n", i, bay->content_id); break; - case mb_ide_waiting: if (bay->cd_base == NULL) { bay->timer = 0; @@ -587,11 +584,10 @@ static void media_bay_step(int i) bay->timer = 0; } break; -#endif /* CONFIG_BLK_DEV_IDE */ - +#endif /* CONFIG_BLK_DEV_IDE_PMAC */ case mb_powering_down: bay->state = mb_empty; -#ifdef CONFIG_BLK_DEV_IDE +#ifdef CONFIG_BLK_DEV_IDE_PMAC if (bay->cd_index >= 0) { printk(KERN_DEBUG "Unregistering mb %d ide, index:%d\n", i, bay->cd_index); @@ -607,7 +603,7 @@ static void media_bay_step(int i) bay->content_id = MB_NO; } } -#endif /* CONFIG_BLK_DEV_IDE */ +#endif /* CONFIG_BLK_DEV_IDE_PMAC */ MBDBG("mediabay%d: end of power down\n", i); break; } @@ -739,7 +735,7 @@ static int media_bay_resume(struct macio_dev *mdev) bay->last_value = bay->content_id; bay->value_count = msecs_to_jiffies(MB_STABLE_DELAY); bay->timer = msecs_to_jiffies(MB_POWER_DELAY); -#ifdef CONFIG_BLK_DEV_IDE +#ifdef CONFIG_BLK_DEV_IDE_PMAC bay->cd_retry = 0; #endif do { @@ -829,7 +825,7 @@ static int __init media_bay_init(void) for (i=0; i<MAX_BAYS; i++) { memset((char *)&media_bays[i], 0, sizeof(struct media_bay_info)); media_bays[i].content_id = -1; -#ifdef CONFIG_BLK_DEV_IDE +#ifdef CONFIG_BLK_DEV_IDE_PMAC media_bays[i].cd_index = -1; #endif } diff --git a/drivers/scsi/ide-scsi.c b/drivers/scsi/ide-scsi.c index 6c4f0f08178..68e5c632c5d 100644 --- a/drivers/scsi/ide-scsi.c +++ b/drivers/scsi/ide-scsi.c @@ -287,7 +287,7 @@ static int idescsi_end_request(ide_drive_t *, int, int); static ide_startstop_t idescsi_atapi_error(ide_drive_t *drive, struct request *rq, u8 stat, u8 err) { - if (HWIF(drive)->INB(IDE_STATUS_REG) & (BUSY_STAT|DRQ_STAT)) + if (ide_read_status(drive) & (BUSY_STAT | DRQ_STAT)) /* force an abort */ HWIF(drive)->OUTB(WIN_IDLEIMMEDIATE,IDE_COMMAND_REG); @@ -423,7 +423,7 @@ static ide_startstop_t idescsi_pc_intr (ide_drive_t *drive) } /* Clear the interrupt */ - stat = drive->hwif->INB(IDE_STATUS_REG); + stat = ide_read_status(drive); if ((stat & DRQ_STAT) == 0) { /* No more interrupts */ diff --git a/include/asm-powerpc/mediabay.h b/include/asm-powerpc/mediabay.h index 9daa3252d7b..de83fe19630 100644 --- a/include/asm-powerpc/mediabay.h +++ b/include/asm-powerpc/mediabay.h @@ -18,14 +18,14 @@ #define MB_NO 7 /* media bay contains nothing */ int check_media_bay(struct device_node *which_bay, int what); -int check_media_bay_by_base(unsigned long base, int what); /* Number of bays in the machine or 0 */ extern int media_bay_count; -/* called by pmac-ide.c to register IDE controller for media bay */ -extern int media_bay_set_ide_infos(struct device_node* which_bay, - unsigned long base, int irq, int index); +int check_media_bay_by_base(unsigned long base, int what); +/* called by IDE PMAC host driver to register IDE controller for media bay */ +int media_bay_set_ide_infos(struct device_node *which_bay, unsigned long base, + int irq, int index); #endif /* __KERNEL__ */ #endif /* _PPC_MEDIABAY_H */ diff --git a/include/linux/ide.h b/include/linux/ide.h index 367c17084a2..acec99da832 100644 --- a/include/linux/ide.h +++ b/include/linux/ide.h @@ -115,10 +115,6 @@ typedef unsigned char byte; /* used everywhere */ #define SATA_ERROR_OFFSET (1) #define SATA_CONTROL_OFFSET (2) -#define SATA_MISC_OFFSET (0) -#define SATA_PHY_OFFSET (1) -#define SATA_IEN_OFFSET (2) - /* * Our Physical Region Descriptor (PRD) table should be large enough * to handle the biggest I/O request we are likely to see. Since requests @@ -173,7 +169,7 @@ enum { ide_unknown, ide_generic, ide_pci, ide_rz1000, ide_trm290, ide_cmd646, ide_cy82c693, ide_4drives, ide_pmac, ide_etrax100, ide_acorn, - ide_au1xxx, ide_forced + ide_au1xxx, ide_palm3710, ide_forced }; typedef u8 hwif_chipset_t; @@ -198,17 +194,6 @@ struct ide_drive_s; int ide_register_hw(hw_regs_t *, void (*)(struct ide_drive_s *), struct hwif_s **); -void ide_setup_ports( hw_regs_t *hw, - unsigned long base, - int *offsets, - unsigned long ctrl, - unsigned long intr, - ide_ack_intr_t *ack_intr, -#if 0 - ide_io_ops_t *iops, -#endif - int irq); - static inline void ide_std_init_ports(hw_regs_t *hw, unsigned long io_addr, unsigned long ctl_addr) @@ -473,7 +458,6 @@ typedef struct hwif_s { /* task file registers for pata and sata */ unsigned long io_ports[IDE_NR_PORTS]; unsigned long sata_scr[SATA_NR_PORTS]; - unsigned long sata_misc[SATA_NR_PORTS]; ide_drive_t drives[MAX_DRIVES]; /* drive info */ @@ -1014,7 +998,8 @@ extern int __ide_pci_register_driver(struct pci_driver *driver, struct module *o void ide_pci_setup_ports(struct pci_dev *, const struct ide_port_info *, int, u8 *); void ide_setup_pci_noise(struct pci_dev *, const struct ide_port_info *); -#ifdef CONFIG_BLK_DEV_IDEDMA_PCI +/* FIXME: palm_bk3710 uses BLK_DEV_IDEDMA_PCI without BLK_DEV_IDEPCI! */ +#if defined(CONFIG_BLK_DEV_IDEPCI) && defined(CONFIG_BLK_DEV_IDEDMA_PCI) void ide_hwif_setup_dma(ide_hwif_t *, const struct ide_port_info *); #else static inline void ide_hwif_setup_dma(ide_hwif_t *hwif, @@ -1324,4 +1309,25 @@ static inline void ide_set_irq(ide_drive_t *drive, int on) drive->hwif->OUTB(drive->ctl | (on ? 0 : 2), IDE_CONTROL_REG); } +static inline u8 ide_read_status(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + + return hwif->INB(hwif->io_ports[IDE_STATUS_OFFSET]); +} + +static inline u8 ide_read_altstatus(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + + return hwif->INB(hwif->io_ports[IDE_CONTROL_OFFSET]); +} + +static inline u8 ide_read_error(ide_drive_t *drive) +{ + ide_hwif_t *hwif = drive->hwif; + + return hwif->INB(hwif->io_ports[IDE_ERROR_OFFSET]); +} + #endif /* _IDE_H */ |