diff options
192 files changed, 9116 insertions, 1153 deletions
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9722f8bb506..df026340a50 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -498,6 +498,13 @@ config ARCH_S3C2410 BAST (<http://www.simtec.co.uk/products/EB110ITX/>), the IPAQ 1940 or the Samsung SMDK2410 development board (and derivatives). +config ARCH_S3C64XX + bool "Samsung S3C64XX" + select GENERIC_GPIO + select HAVE_CLK + help + Samsung S3C64XX series based systems + config ARCH_SHARK bool "Shark" select ISA @@ -590,6 +597,7 @@ source "arch/arm/mach-orion5x/Kconfig" source "arch/arm/mach-kirkwood/Kconfig" source "arch/arm/plat-s3c24xx/Kconfig" +source "arch/arm/plat-s3c64xx/Kconfig" source "arch/arm/plat-s3c/Kconfig" if ARCH_S3C2410 @@ -601,6 +609,11 @@ source "arch/arm/mach-s3c2442/Kconfig" source "arch/arm/mach-s3c2443/Kconfig" endif +if ARCH_S3C64XX +source "arch/arm/mach-s3c6400/Kconfig" +source "arch/arm/mach-s3c6410/Kconfig" +endif + source "arch/arm/mach-lh7a40x/Kconfig" source "arch/arm/mach-imx/Kconfig" diff --git a/arch/arm/Makefile b/arch/arm/Makefile index bd6e28115eb..91b02cbc23b 100644 --- a/arch/arm/Makefile +++ b/arch/arm/Makefile @@ -121,7 +121,10 @@ endif machine-$(CONFIG_ARCH_OMAP3) := omap2 plat-$(CONFIG_ARCH_OMAP) := omap machine-$(CONFIG_ARCH_S3C2410) := s3c2410 s3c2400 s3c2412 s3c2440 s3c2442 s3c2443 + machine-$(CONFIG_ARCH_S3C24A0) := s3c24a0 plat-$(CONFIG_PLAT_S3C24XX) := s3c24xx s3c + machine-$(CONFIG_ARCH_S3C64XX) := s3c6400 s3c6410 + plat-$(CONFIG_PLAT_S3C64XX) := s3c64xx s3c machine-$(CONFIG_ARCH_LH7A40X) := lh7a40x machine-$(CONFIG_ARCH_VERSATILE) := versatile machine-$(CONFIG_ARCH_IMX) := imx diff --git a/arch/arm/common/vic.c b/arch/arm/common/vic.c index f1e4b8f60ca..ecf0bfbab10 100644 --- a/arch/arm/common/vic.c +++ b/arch/arm/common/vic.c @@ -69,12 +69,12 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, /* * Make sure we clear all existing interrupts */ - writel(0, base + VIC_VECT_ADDR); + writel(0, base + VIC_PL190_VECT_ADDR); for (i = 0; i < 19; i++) { unsigned int value; - value = readl(base + VIC_VECT_ADDR); - writel(value, base + VIC_VECT_ADDR); + value = readl(base + VIC_PL190_VECT_ADDR); + writel(value, base + VIC_PL190_VECT_ADDR); } for (i = 0; i < 16; i++) { @@ -82,7 +82,7 @@ void __init vic_init(void __iomem *base, unsigned int irq_start, writel(VIC_VECT_CNTL_ENABLE | i, reg); } - writel(32, base + VIC_DEF_VECT_ADDR); + writel(32, base + VIC_PL190_DEF_VECT_ADDR); for (i = 0; i < 32; i++) { unsigned int irq = irq_start + i; diff --git a/arch/arm/configs/s3c6400_defconfig b/arch/arm/configs/s3c6400_defconfig new file mode 100644 index 00000000000..cf3c1b5d704 --- /dev/null +++ b/arch/arm/configs/s3c6400_defconfig @@ -0,0 +1,845 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.28-rc3 +# Mon Nov 3 10:10:30 2008 +# +CONFIG_ARM=y +CONFIG_SYS_SUPPORTS_APM_EMULATION=y +CONFIG_GENERIC_GPIO=y +# CONFIG_GENERIC_TIME is not set +# CONFIG_GENERIC_CLOCKEVENTS is not set +CONFIG_MMU=y +CONFIG_NO_IOPORT=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_HAVE_LATENCYTOP_SUPPORT=y +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_HARDIRQS_SW_RESEND=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_RWSEM_GENERIC_SPINLOCK=y +# CONFIG_ARCH_HAS_ILOG2_U32 is not set +# CONFIG_ARCH_HAS_ILOG2_U64 is not set +CONFIG_GENERIC_HWEIGHT=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y +CONFIG_VECTORS_BASE=0xffff0000 +CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" + +# +# General setup +# +CONFIG_EXPERIMENTAL=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 +CONFIG_LOCALVERSION="" +CONFIG_LOCALVERSION_AUTO=y +CONFIG_SWAP=y +# CONFIG_SYSVIPC is not set +# CONFIG_BSD_PROCESS_ACCT is not set +# CONFIG_IKCONFIG is not set +CONFIG_LOG_BUF_SHIFT=17 +# CONFIG_CGROUPS is not set +# CONFIG_GROUP_SCHED is not set +CONFIG_SYSFS_DEPRECATED=y +CONFIG_SYSFS_DEPRECATED_V2=y +# CONFIG_RELAY is not set +CONFIG_NAMESPACES=y +# CONFIG_UTS_NS is not set +# CONFIG_USER_NS is not set +# CONFIG_PID_NS is not set +CONFIG_BLK_DEV_INITRD=y +CONFIG_INITRAMFS_SOURCE="" +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SYSCTL=y +# CONFIG_EMBEDDED is not set +CONFIG_UID16=y +CONFIG_SYSCTL_SYSCALL=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +# CONFIG_KALLSYMS_EXTRA_PASS is not set +CONFIG_HOTPLUG=y +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_ELF_CORE=y +CONFIG_COMPAT_BRK=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_ANON_INODES=y +CONFIG_EPOLL=y +CONFIG_SIGNALFD=y +CONFIG_TIMERFD=y +CONFIG_EVENTFD=y +CONFIG_SHMEM=y +CONFIG_AIO=y +CONFIG_VM_EVENT_COUNTERS=y +CONFIG_SLUB_DEBUG=y +# CONFIG_SLAB is not set +CONFIG_SLUB=y +# CONFIG_SLOB is not set +# CONFIG_PROFILING is not set +# CONFIG_MARKERS is not set +CONFIG_HAVE_OPROFILE=y +# CONFIG_KPROBES is not set +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_CLK=y +CONFIG_HAVE_GENERIC_DMA_COHERENT=y +CONFIG_SLABINFO=y +CONFIG_RT_MUTEXES=y +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +# CONFIG_MODULE_FORCE_LOAD is not set +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +CONFIG_KMOD=y +CONFIG_BLOCK=y +CONFIG_LBD=y +# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_LSF=y +# CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +CONFIG_IOSCHED_DEADLINE=y +CONFIG_IOSCHED_CFQ=y +# CONFIG_DEFAULT_AS is not set +# CONFIG_DEFAULT_DEADLINE is not set +CONFIG_DEFAULT_CFQ=y +# CONFIG_DEFAULT_NOOP is not set +CONFIG_DEFAULT_IOSCHED="cfq" +CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set + +# +# System Type +# +# CONFIG_ARCH_AAEC2000 is not set +# CONFIG_ARCH_INTEGRATOR is not set +# CONFIG_ARCH_REALVIEW is not set +# CONFIG_ARCH_VERSATILE is not set +# CONFIG_ARCH_AT91 is not set +# CONFIG_ARCH_CLPS7500 is not set +# CONFIG_ARCH_CLPS711X is not set +# CONFIG_ARCH_EBSA110 is not set +# CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_FOOTBRIDGE is not set +# CONFIG_ARCH_NETX is not set +# CONFIG_ARCH_H720X is not set +# CONFIG_ARCH_IMX is not set +# CONFIG_ARCH_IOP13XX is not set +# CONFIG_ARCH_IOP32X is not set +# CONFIG_ARCH_IOP33X is not set +# CONFIG_ARCH_IXP23XX is not set +# CONFIG_ARCH_IXP2000 is not set +# CONFIG_ARCH_IXP4XX is not set +# CONFIG_ARCH_L7200 is not set +# CONFIG_ARCH_KIRKWOOD is not set +# CONFIG_ARCH_KS8695 is not set +# CONFIG_ARCH_NS9XXX is not set +# CONFIG_ARCH_LOKI is not set +# CONFIG_ARCH_MV78XX0 is not set +# CONFIG_ARCH_MXC is not set +# CONFIG_ARCH_ORION5X is not set +# CONFIG_ARCH_PNX4008 is not set +# CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_RPC is not set +# CONFIG_ARCH_SA1100 is not set +# CONFIG_ARCH_S3C2410 is not set +CONFIG_ARCH_S3C64XX=y +# CONFIG_ARCH_SHARK is not set +# CONFIG_ARCH_LH7A40X is not set +# CONFIG_ARCH_DAVINCI is not set +# CONFIG_ARCH_OMAP is not set +# CONFIG_ARCH_MSM is not set +CONFIG_PLAT_S3C64XX=y +CONFIG_CPU_S3C6400_INIT=y +CONFIG_CPU_S3C6400_CLOCK=y +CONFIG_S3C64XX_SETUP_I2C0=y +CONFIG_S3C64XX_SETUP_I2C1=y +CONFIG_PLAT_S3C=y + +# +# Boot options +# +CONFIG_S3C_BOOT_ERROR_RESET=y + +# +# Power management +# +CONFIG_S3C_LOWLEVEL_UART_PORT=0 +CONFIG_S3C_GPIO_SPACE=0 +CONFIG_S3C_GPIO_TRACK=y +CONFIG_S3C_GPIO_PULL_UPDOWN=y +CONFIG_S3C_GPIO_CFG_S3C24XX=y +CONFIG_S3C_GPIO_CFG_S3C64XX=y +CONFIG_S3C_DEV_HSMMC=y +CONFIG_S3C_DEV_HSMMC1=y +CONFIG_S3C_DEV_I2C1=y +CONFIG_CPU_S3C6410=y +CONFIG_S3C6410_SETUP_SDHCI=y +CONFIG_MACH_SMDK6410=y +CONFIG_SMDK6410_SD_CH0=y +# CONFIG_SMDK6410_SD_CH1 is not set + +# +# Processor Type +# +CONFIG_CPU_32=y +CONFIG_CPU_V6=y +CONFIG_CPU_32v6K=y +CONFIG_CPU_32v6=y +CONFIG_CPU_ABRT_EV6=y +CONFIG_CPU_PABRT_NOIFAR=y +CONFIG_CPU_CACHE_V6=y +CONFIG_CPU_CACHE_VIPT=y +CONFIG_CPU_COPY_V6=y +CONFIG_CPU_TLB_V6=y +CONFIG_CPU_HAS_ASID=y +CONFIG_CPU_CP15=y +CONFIG_CPU_CP15_MMU=y + +# +# Processor Features +# +CONFIG_ARM_THUMB=y +# CONFIG_CPU_ICACHE_DISABLE is not set +# CONFIG_CPU_DCACHE_DISABLE is not set +# CONFIG_CPU_BPREDICT_DISABLE is not set +# CONFIG_OUTER_CACHE is not set +CONFIG_ARM_VIC=y + +# +# Bus support +# +# CONFIG_PCI_SYSCALL is not set +# CONFIG_ARCH_SUPPORTS_MSI is not set +# CONFIG_PCCARD is not set + +# +# Kernel Features +# +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 +# CONFIG_PREEMPT is not set +CONFIG_HZ=100 +CONFIG_AEABI=y +CONFIG_OABI_COMPAT=y +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_FLATMEM_MANUAL=y +# CONFIG_DISCONTIGMEM_MANUAL is not set +# CONFIG_SPARSEMEM_MANUAL is not set +CONFIG_FLATMEM=y +CONFIG_FLAT_NODE_MEM_MAP=y +CONFIG_PAGEFLAGS_EXTENDED=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +# CONFIG_RESOURCES_64BIT is not set +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 +CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_ALIGNMENT_TRAP=y + +# +# Boot options +# +CONFIG_ZBOOT_ROM_TEXT=0 +CONFIG_ZBOOT_ROM_BSS=0 +CONFIG_CMDLINE="console=ttySAC0,115200 root=/dev/ram init=/bin/bash initrd=0x51000000,4M" +# CONFIG_XIP_KERNEL is not set +# CONFIG_KEXEC is not set + +# +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# +# Floating point emulation +# + +# +# At least one emulation must be selected +# +# CONFIG_FPE_NWFPE is not set +# CONFIG_FPE_FASTFPE is not set +CONFIG_VFP=y + +# +# Userspace binary formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Power management options +# +# CONFIG_PM is not set +CONFIG_ARCH_SUSPEND_POSSIBLE=y +# CONFIG_NET is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=y +CONFIG_FIRMWARE_IN_KERNEL=y +CONFIG_EXTRA_FIRMWARE="" +# CONFIG_DEBUG_DRIVER is not set +# CONFIG_DEBUG_DEVRES is not set +# CONFIG_SYS_HYPERVISOR is not set +# CONFIG_MTD is not set +# CONFIG_PARPORT is not set +CONFIG_BLK_DEV=y +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=y +# CONFIG_BLK_DEV_CRYPTOLOOP is not set +CONFIG_BLK_DEV_RAM=y +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_BLK_DEV_RAM_SIZE=4096 +# CONFIG_BLK_DEV_XIP is not set +# CONFIG_CDROM_PKTCDVD is not set +CONFIG_MISC_DEVICES=y +# CONFIG_EEPROM_93CX6 is not set +# CONFIG_ENCLOSURE_SERVICES is not set +CONFIG_HAVE_IDE=y +# CONFIG_IDE is not set + +# +# SCSI device support +# +# CONFIG_RAID_ATTRS is not set +# CONFIG_SCSI is not set +# CONFIG_SCSI_DMA is not set +# CONFIG_SCSI_NETLINK is not set +# CONFIG_ATA is not set +# CONFIG_MD is not set + +# +# Input device support +# +CONFIG_INPUT=y +# CONFIG_INPUT_FF_MEMLESS is not set +# CONFIG_INPUT_POLLDEV is not set + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=y +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=y +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_KEYBOARD_STOWAWAY is not set +# CONFIG_KEYBOARD_GPIO is not set +CONFIG_INPUT_MOUSE=y +CONFIG_MOUSE_PS2=y +CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_LOGIPS2PP=y +CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_LIFEBOOK=y +CONFIG_MOUSE_PS2_TRACKPOINT=y +# CONFIG_MOUSE_PS2_ELANTECH is not set +# CONFIG_MOUSE_PS2_TOUCHKIT is not set +# CONFIG_MOUSE_SERIAL is not set +# CONFIG_MOUSE_APPLETOUCH is not set +# CONFIG_MOUSE_BCM5974 is not set +# CONFIG_MOUSE_VSXXXAA is not set +# CONFIG_MOUSE_GPIO is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TABLET is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +CONFIG_SERIO_SERPORT=y +CONFIG_SERIO_LIBPS2=y +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +CONFIG_VT=y +CONFIG_CONSOLE_TRANSLATIONS=y +CONFIG_VT_CONSOLE=y +CONFIG_HW_CONSOLE=y +# CONFIG_VT_HW_CONSOLE_BINDING is not set +CONFIG_DEVKMEM=y +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +# CONFIG_SERIAL_8250_CONSOLE is not set +CONFIG_SERIAL_8250_NR_UARTS=4 +CONFIG_SERIAL_8250_RUNTIME_UARTS=4 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_SAMSUNG=y +CONFIG_SERIAL_SAMSUNG_UARTS=4 +# CONFIG_SERIAL_SAMSUNG_DEBUG is not set +CONFIG_SERIAL_SAMSUNG_CONSOLE=y +CONFIG_SERIAL_S3C6400=y +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +CONFIG_UNIX98_PTYS=y +CONFIG_LEGACY_PTYS=y +CONFIG_LEGACY_PTY_COUNT=256 +# CONFIG_IPMI_HANDLER is not set +CONFIG_HW_RANDOM=y +# CONFIG_NVRAM is not set +# CONFIG_R3964 is not set +# CONFIG_RAW_DRIVER is not set +# CONFIG_TCG_TPM is not set +CONFIG_I2C=y +CONFIG_I2C_BOARDINFO=y +CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y + +# +# I2C Hardware Bus support +# + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +# CONFIG_I2C_OCORES is not set +CONFIG_I2C_S3C2410=y +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set + +# +# Other I2C/SMBus bus drivers +# +# CONFIG_I2C_PCA_PLATFORM is not set +# CONFIG_I2C_STUB is not set + +# +# Miscellaneous I2C Chip support +# +# CONFIG_DS1682 is not set +CONFIG_AT24=y +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_PCF8575 is not set +# CONFIG_SENSORS_PCA9539 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_TPS65010 is not set +# CONFIG_SENSORS_MAX6875 is not set +# CONFIG_SENSORS_TSL2550 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set +# CONFIG_SPI is not set +CONFIG_ARCH_REQUIRE_GPIOLIB=y +CONFIG_GPIOLIB=y +# CONFIG_DEBUG_GPIO is not set +# CONFIG_GPIO_SYSFS is not set + +# +# I2C GPIO expanders: +# +# CONFIG_GPIO_MAX732X is not set +# CONFIG_GPIO_PCA953X is not set +# CONFIG_GPIO_PCF857X is not set + +# +# PCI GPIO expanders: +# + +# +# SPI GPIO expanders: +# +# CONFIG_W1 is not set +# CONFIG_POWER_SUPPLY is not set +CONFIG_HWMON=y +# CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set +# CONFIG_SENSORS_AD7418 is not set +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1029 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7470 is not set +# CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ATXP1 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_F71805F is not set +# CONFIG_SENSORS_F71882FG is not set +# CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_MAX1619 is not set +# CONFIG_SENSORS_MAX6650 is not set +# CONFIG_SENSORS_PC87360 is not set +# CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_DME1737 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_SMSC47M192 is not set +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_ADS7828 is not set +# CONFIG_SENSORS_THMC50 is not set +# CONFIG_SENSORS_VT1211 is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83791D is not set +# CONFIG_SENSORS_W83792D is not set +# CONFIG_SENSORS_W83793 is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83L786NG is not set +# CONFIG_SENSORS_W83627HF is not set +# CONFIG_SENSORS_W83627EHF is not set +# CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set +# CONFIG_WATCHDOG is not set + +# +# Sonics Silicon Backplane +# +CONFIG_SSB_POSSIBLE=y +# CONFIG_SSB is not set + +# +# Multifunction device drivers +# +# CONFIG_MFD_CORE is not set +# CONFIG_MFD_SM501 is not set +# CONFIG_MFD_ASIC3 is not set +# CONFIG_HTC_EGPIO is not set +# CONFIG_HTC_PASIC3 is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_T7L66XB is not set +# CONFIG_MFD_TC6387XB is not set +# CONFIG_MFD_TC6393XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set + +# +# Multimedia devices +# + +# +# Multimedia core support +# +# CONFIG_VIDEO_DEV is not set +# CONFIG_VIDEO_MEDIA is not set + +# +# Multimedia drivers +# +# CONFIG_DAB is not set + +# +# Graphics support +# +# CONFIG_VGASTATE is not set +# CONFIG_VIDEO_OUTPUT_CONTROL is not set +# CONFIG_FB is not set +# CONFIG_BACKLIGHT_LCD_SUPPORT is not set + +# +# Display device support +# +# CONFIG_DISPLAY_SUPPORT is not set + +# +# Console display driver support +# +# CONFIG_VGA_CONSOLE is not set +CONFIG_DUMMY_CONSOLE=y +# CONFIG_SOUND is not set +CONFIG_HID_SUPPORT=y +CONFIG_HID=y +CONFIG_HID_DEBUG=y +# CONFIG_HIDRAW is not set +# CONFIG_HID_PID is not set + +# +# Special HID drivers +# +# CONFIG_HID_COMPAT is not set +CONFIG_USB_SUPPORT=y +CONFIG_USB_ARCH_HAS_HCD=y +# CONFIG_USB_ARCH_HAS_OHCI is not set +# CONFIG_USB_ARCH_HAS_EHCI is not set +# CONFIG_USB is not set + +# +# Enable Host or Gadget support to see Inventra options +# + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# +# CONFIG_USB_GADGET is not set +CONFIG_MMC=y +CONFIG_MMC_DEBUG=y +CONFIG_MMC_UNSAFE_RESUME=y + +# +# MMC/SD/SDIO Card Drivers +# +CONFIG_MMC_BLOCK=y +CONFIG_MMC_BLOCK_BOUNCE=y +CONFIG_SDIO_UART=y +# CONFIG_MMC_TEST is not set + +# +# MMC/SD/SDIO Host Controller Drivers +# +CONFIG_MMC_SDHCI=y +CONFIG_MMC_SDHCI_S3C=y +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set +# CONFIG_NEW_LEDS is not set +CONFIG_RTC_LIB=y +# CONFIG_RTC_CLASS is not set +# CONFIG_DMADEVICES is not set + +# +# Voltage and Current regulators +# +# CONFIG_REGULATOR is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +# CONFIG_REGULATOR_BQ24022 is not set +# CONFIG_UIO is not set + +# +# File systems +# +CONFIG_EXT2_FS=y +# CONFIG_EXT2_FS_XATTR is not set +# CONFIG_EXT2_FS_XIP is not set +CONFIG_EXT3_FS=y +CONFIG_EXT3_FS_XATTR=y +CONFIG_EXT3_FS_POSIX_ACL=y +CONFIG_EXT3_FS_SECURITY=y +# CONFIG_EXT4_FS is not set +CONFIG_JBD=y +CONFIG_FS_MBCACHE=y +# CONFIG_REISERFS_FS is not set +# CONFIG_JFS_FS is not set +CONFIG_FS_POSIX_ACL=y +CONFIG_FILE_LOCKING=y +# CONFIG_XFS_FS is not set +# CONFIG_GFS2_FS is not set +CONFIG_DNOTIFY=y +CONFIG_INOTIFY=y +CONFIG_INOTIFY_USER=y +# CONFIG_QUOTA is not set +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set +# CONFIG_FUSE_FS is not set +CONFIG_GENERIC_ACL=y + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +# CONFIG_MSDOS_FS is not set +# CONFIG_VFAT_FS is not set +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y +CONFIG_SYSFS=y +CONFIG_TMPFS=y +CONFIG_TMPFS_POSIX_ACL=y +# CONFIG_HUGETLB_PAGE is not set +# CONFIG_CONFIGFS_FS is not set + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +CONFIG_CRAMFS=y +# CONFIG_VXFS_FS is not set +# CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +CONFIG_ROMFS_FS=y +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Partition Types +# +# CONFIG_PARTITION_ADVANCED is not set +CONFIG_MSDOS_PARTITION=y +# CONFIG_NLS is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +CONFIG_ENABLE_WARN_DEPRECATED=y +CONFIG_ENABLE_MUST_CHECK=y +CONFIG_FRAME_WARN=1024 +CONFIG_MAGIC_SYSRQ=y +# CONFIG_UNUSED_SYMBOLS is not set +# CONFIG_DEBUG_FS is not set +# CONFIG_HEADERS_CHECK is not set +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_SHIRQ is not set +CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_SCHED_DEBUG=y +# CONFIG_SCHEDSTATS is not set +# CONFIG_TIMER_STATS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_DEBUG_RT_MUTEXES=y +CONFIG_DEBUG_PI_LIST=y +# CONFIG_RT_MUTEX_TESTER is not set +CONFIG_DEBUG_SPINLOCK=y +CONFIG_DEBUG_MUTEXES=y +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +CONFIG_DEBUG_SPINLOCK_SLEEP=y +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_DEBUG_KOBJECT is not set +CONFIG_DEBUG_BUGVERBOSE=y +CONFIG_DEBUG_INFO=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_WRITECOUNT is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_SG is not set +CONFIG_FRAME_POINTER=y +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_FAULT_INJECTION is not set +# CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +CONFIG_HAVE_FUNCTION_TRACER=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_DEBUG_USER=y +CONFIG_DEBUG_ERRORS=y +# CONFIG_DEBUG_STACK_USAGE is not set +CONFIG_DEBUG_LL=y +# CONFIG_DEBUG_ICEDCC is not set +CONFIG_DEBUG_S3C_PORT=y +CONFIG_DEBUG_S3C_UART=0 + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set +# CONFIG_SECURITY_FILE_CAPABILITIES is not set +# CONFIG_CRYPTO is not set + +# +# Library routines +# +CONFIG_BITREVERSE=y +# CONFIG_CRC_CCITT is not set +# CONFIG_CRC16 is not set +# CONFIG_CRC_T10DIF is not set +# CONFIG_CRC_ITU_T is not set +CONFIG_CRC32=y +# CONFIG_CRC7 is not set +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_PLIST=y +CONFIG_HAS_IOMEM=y +CONFIG_HAS_DMA=y diff --git a/arch/arm/include/asm/hardware/vic.h b/arch/arm/include/asm/hardware/vic.h index 263f2c362a3..f87328d4a18 100644 --- a/arch/arm/include/asm/hardware/vic.h +++ b/arch/arm/include/asm/hardware/vic.h @@ -29,15 +29,17 @@ #define VIC_INT_SOFT 0x18 #define VIC_INT_SOFT_CLEAR 0x1c #define VIC_PROTECT 0x20 -#define VIC_VECT_ADDR 0x30 -#define VIC_DEF_VECT_ADDR 0x34 +#define VIC_PL190_VECT_ADDR 0x30 /* PL190 only */ +#define VIC_PL190_DEF_VECT_ADDR 0x34 /* PL190 only */ -#define VIC_VECT_ADDR0 0x100 /* 0 to 15 */ -#define VIC_VECT_CNTL0 0x200 /* 0 to 15 */ +#define VIC_VECT_ADDR0 0x100 /* 0 to 15 (0..31 PL192) */ +#define VIC_VECT_CNTL0 0x200 /* 0 to 15 (0..31 PL192) */ #define VIC_ITCR 0x300 /* VIC test control register */ #define VIC_VECT_CNTL_ENABLE (1 << 5) +#define VIC_PL192_VECT_ADDR 0xF00 + #ifndef __ASSEMBLY__ void vic_init(void __iomem *base, unsigned int irq_start, u32 vic_sources); #endif diff --git a/arch/arm/mach-s3c2410/Kconfig b/arch/arm/mach-s3c2410/Kconfig index 99fdc736698..c8798dc869b 100644 --- a/arch/arm/mach-s3c2410/Kconfig +++ b/arch/arm/mach-s3c2410/Kconfig @@ -32,11 +32,6 @@ config S3C2410_GPIO help GPIO code for S3C2410 and similar processors -config S3C2410_CLOCK - bool - help - Clock code for the S3C2410, and similar processors - config SIMTEC_NOR bool help @@ -84,6 +79,7 @@ config ARCH_BAST select PM_SIMTEC if PM select SIMTEC_NOR select MACH_BAST_IDE + select S3C24XX_DCLK select ISA help Say Y here if you are using the Simtec Electronics EB2410ITX @@ -121,6 +117,7 @@ config MACH_TCT_HAMMER config MACH_VR1000 bool "Thorcom VR1000" select PM_SIMTEC if PM + select S3C24XX_DCLK select SIMTEC_NOR select MACH_BAST_IDE select CPU_S3C2410 diff --git a/arch/arm/mach-s3c2410/Makefile b/arch/arm/mach-s3c2410/Makefile index 00f31f8c4e7..fca02f82711 100644 --- a/arch/arm/mach-s3c2410/Makefile +++ b/arch/arm/mach-s3c2410/Makefile @@ -15,7 +15,6 @@ obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_CPU_S3C2410_DMA) += dma.o obj-$(CONFIG_S3C2410_PM) += pm.o sleep.o obj-$(CONFIG_S3C2410_GPIO) += gpio.o -obj-$(CONFIG_S3C2410_CLOCK) += clock.o # Machine support diff --git a/arch/arm/mach-s3c2410/dma.c b/arch/arm/mach-s3c2410/dma.c index 7d914a470b6..30983cc612d 100644 --- a/arch/arm/mach-s3c2410/dma.c +++ b/arch/arm/mach-s3c2410/dma.c @@ -25,12 +25,12 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c/regs-ac97.h> +#include <plat/regs-ac97.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> #include <asm/plat-s3c24xx/regs-iis.h> -#include <asm/plat-s3c24xx/regs-spi.h> +#include <plat/regs-spi.h> static struct s3c24xx_dma_map __initdata s3c2410_dma_mappings[] = { [DMACH_XD0] = { diff --git a/arch/arm/mach-s3c2410/include/mach/gpio-core.h b/arch/arm/mach-s3c2410/include/mach/gpio-core.h new file mode 100644 index 00000000000..6c9fbb99ef1 --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/gpio-core.h @@ -0,0 +1,34 @@ +/* arch/arm/mach-s3c24100/include/mach/gpio-core.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C2410 - GPIO core support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_GPIO_CORE_H +#define __ASM_ARCH_GPIO_CORE_H __FILE__ + +#include <plat/gpio-core.h> +#include <mach/regs-gpio.h> + +extern struct s3c_gpio_chip s3c24xx_gpios[]; + +static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int pin) +{ + struct s3c_gpio_chip *chip; + + if (pin > S3C2410_GPG10) + return NULL; + + chip = &s3c24xx_gpios[pin/32]; + return (S3C2410_GPIO_OFFSET(pin) > chip->chip.ngpio) ? chip : NULL; +} + +#endif /* __ASM_ARCH_GPIO_CORE_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/irqs.h b/arch/arm/mach-s3c2410/include/mach/irqs.h index 950c71bf148..fa8764b0569 100644 --- a/arch/arm/mach-s3c2410/include/mach/irqs.h +++ b/arch/arm/mach-s3c2410/include/mach/irqs.h @@ -134,6 +134,8 @@ #define IRQ_S3C2443_HSMMC S3C2410_IRQ(20) /* IRQ_SDI */ #define IRQ_S3C2443_NAND S3C2410_IRQ(24) /* reserved */ +#define IRQ_HSMMC0 IRQ_S3C2443_HSMMC + #define IRQ_S3C2443_LCD1 S3C2410_IRQSUB(14) #define IRQ_S3C2443_LCD2 S3C2410_IRQSUB(15) #define IRQ_S3C2443_LCD3 S3C2410_IRQSUB(16) diff --git a/arch/arm/mach-s3c2410/include/mach/map.h b/arch/arm/mach-s3c2410/include/mach/map.h index 23c470c2e5b..255fdfeaf95 100644 --- a/arch/arm/mach-s3c2410/include/mach/map.h +++ b/arch/arm/mach-s3c2410/include/mach/map.h @@ -13,34 +13,20 @@ #ifndef __ASM_ARCH_MAP_H #define __ASM_ARCH_MAP_H +#include <plat/map-base.h> #include <plat/map.h> #define S3C2410_ADDR(x) S3C_ADDR(x) -/* interrupt controller is the first thing we put in, to make - * the assembly code for the irq detection easier - */ -#define S3C24XX_VA_IRQ S3C_VA_IRQ -#define S3C2410_PA_IRQ (0x4A000000) -#define S3C24XX_SZ_IRQ SZ_1M - -/* memory controller registers */ -#define S3C24XX_VA_MEMCTRL S3C_VA_MEM -#define S3C2410_PA_MEMCTRL (0x48000000) -#define S3C24XX_SZ_MEMCTRL SZ_1M - /* USB host controller */ #define S3C2410_PA_USBHOST (0x49000000) -#define S3C24XX_SZ_USBHOST SZ_1M /* DMA controller */ #define S3C2410_PA_DMA (0x4B000000) #define S3C24XX_SZ_DMA SZ_1M /* Clock and Power management */ -#define S3C24XX_VA_CLKPWR S3C_VA_SYS #define S3C2410_PA_CLKPWR (0x4C000000) -#define S3C24XX_SZ_CLKPWR SZ_1M /* LCD controller */ #define S3C2410_PA_LCD (0x4D000000) @@ -48,48 +34,12 @@ /* NAND flash controller */ #define S3C2410_PA_NAND (0x4E000000) -#define S3C24XX_SZ_NAND SZ_1M - -/* UARTs */ -#define S3C24XX_VA_UART S3C_VA_UART -#define S3C2410_PA_UART (0x50000000) -#define S3C24XX_SZ_UART SZ_1M - -/* Timers */ -#define S3C24XX_VA_TIMER S3C_VA_TIMER -#define S3C2410_PA_TIMER (0x51000000) -#define S3C24XX_SZ_TIMER SZ_1M - -/* USB Device port */ -#define S3C2410_PA_USBDEV (0x52000000) -#define S3C24XX_SZ_USBDEV SZ_1M - -/* Watchdog */ -#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG -#define S3C2410_PA_WATCHDOG (0x53000000) -#define S3C24XX_SZ_WATCHDOG SZ_1M /* IIC hardware controller */ #define S3C2410_PA_IIC (0x54000000) -#define S3C24XX_SZ_IIC SZ_1M /* IIS controller */ #define S3C2410_PA_IIS (0x55000000) -#define S3C24XX_SZ_IIS SZ_1M - -/* GPIO ports */ - -/* the calculation for the VA of this must ensure that - * it is the same distance apart from the UART in the - * phsyical address space, as the initial mapping for the IO - * is done as a 1:1 maping. This puts it (currently) at - * 0xFA800000, which is not in the way of any current mapping - * by the base system. -*/ - -#define S3C2410_PA_GPIO (0x56000000) -#define S3C24XX_VA_GPIO ((S3C2410_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) -#define S3C24XX_SZ_GPIO SZ_1M /* RTC */ #define S3C2410_PA_RTC (0x57000000) @@ -97,15 +47,12 @@ /* ADC */ #define S3C2410_PA_ADC (0x58000000) -#define S3C24XX_SZ_ADC SZ_1M /* SPI */ #define S3C2410_PA_SPI (0x59000000) -#define S3C24XX_SZ_SPI SZ_1M /* SDI */ #define S3C2410_PA_SDI (0x5A000000) -#define S3C24XX_SZ_SDI SZ_1M /* CAMIF */ #define S3C2440_PA_CAMIF (0x4F000000) @@ -120,13 +67,6 @@ #define S3C2443_PA_HSMMC (0x4A800000) #define S3C2443_SZ_HSMMC (256) -/* ISA style IO, for each machine to sort out mappings for, if it - * implements it. We reserve two 16M regions for ISA. - */ - -#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000) -#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000) - /* physical addresses of all the chip-select areas */ #define S3C2410_CS0 (0x00000000) @@ -152,27 +92,16 @@ #define S3C24XX_PA_TIMER S3C2410_PA_TIMER #define S3C24XX_PA_USBDEV S3C2410_PA_USBDEV #define S3C24XX_PA_WATCHDOG S3C2410_PA_WATCHDOG -#define S3C24XX_PA_IIC S3C2410_PA_IIC #define S3C24XX_PA_IIS S3C2410_PA_IIS #define S3C24XX_PA_GPIO S3C2410_PA_GPIO #define S3C24XX_PA_RTC S3C2410_PA_RTC #define S3C24XX_PA_ADC S3C2410_PA_ADC #define S3C24XX_PA_SPI S3C2410_PA_SPI +#define S3C24XX_PA_SDI S3C2410_PA_SDI +#define S3C24XX_PA_NAND S3C2410_PA_NAND -/* deal with the registers that move under the 2412/2413 */ - -#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) -#ifndef __ASSEMBLY__ -extern void __iomem *s3c24xx_va_gpio2; -#endif -#ifdef CONFIG_CPU_S3C2412_ONLY -#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) -#else -#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 -#endif -#else -#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO -#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO -#endif +#define S3C_PA_IIC S3C2410_PA_IIC +#define S3C_PA_UART S3C24XX_PA_UART +#define S3C_PA_HSMMC0 S3C2443_PA_HSMMC #endif /* __ASM_ARCH_MAP_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-clock.h b/arch/arm/mach-s3c2410/include/mach/regs-clock.h index b3f90aa7807..2a5d90e957f 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-clock.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-clock.h @@ -42,13 +42,6 @@ #define S3C2410_CLKCON_IIS (1<<17) #define S3C2410_CLKCON_SPI (1<<18) -#define S3C2410_PLLCON_MDIVSHIFT 12 -#define S3C2410_PLLCON_PDIVSHIFT 4 -#define S3C2410_PLLCON_SDIVSHIFT 0 -#define S3C2410_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1) -#define S3C2410_PLLCON_PDIVMASK ((1<<5)-1) -#define S3C2410_PLLCON_SDIVMASK 3 - /* DCLKCON register addresses in gpio.h */ #define S3C2410_DCLKCON_DCLK0EN (1<<0) @@ -76,32 +69,6 @@ #define S3C2410_CLKSLOW_SLOWVAL(x) (x) #define S3C2410_CLKSLOW_GET_SLOWVAL(x) ((x) & 7) -#ifndef __ASSEMBLY__ - -#include <asm/div64.h> - -static inline unsigned int -s3c2410_get_pll(unsigned int pllval, unsigned int baseclk) -{ - unsigned int mdiv, pdiv, sdiv; - uint64_t fvco; - - mdiv = pllval >> S3C2410_PLLCON_MDIVSHIFT; - pdiv = pllval >> S3C2410_PLLCON_PDIVSHIFT; - sdiv = pllval >> S3C2410_PLLCON_SDIVSHIFT; - - mdiv &= S3C2410_PLLCON_MDIVMASK; - pdiv &= S3C2410_PLLCON_PDIVMASK; - sdiv &= S3C2410_PLLCON_SDIVMASK; - - fvco = (uint64_t)baseclk * (mdiv + 8); - do_div(fvco, (pdiv + 2) << sdiv); - - return (unsigned int)fvco; -} - -#endif /* __ASSEMBLY__ */ - #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) /* extra registers */ diff --git a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h index 528080ceac4..32107761306 100644 --- a/arch/arm/mach-s3c2410/include/mach/regs-gpio.h +++ b/arch/arm/mach-s3c2410/include/mach/regs-gpio.h @@ -1053,13 +1053,6 @@ #define S3C24XX_EXTINT1 S3C24XX_GPIOREG2(0x8C) #define S3C24XX_EXTINT2 S3C24XX_GPIOREG2(0x90) -/* values for S3C2410_EXTINT0/1/2 */ -#define S3C2410_EXTINT_LOWLEV (0x00) -#define S3C2410_EXTINT_HILEV (0x01) -#define S3C2410_EXTINT_FALLEDGE (0x02) -#define S3C2410_EXTINT_RISEEDGE (0x04) -#define S3C2410_EXTINT_BOTHEDGE (0x06) - /* interrupt filtering conrrol for EINT16..EINT23 */ #define S3C2410_EINFLT0 S3C2410_GPIOREG(0x94) #define S3C2410_EINFLT1 S3C2410_GPIOREG(0x98) diff --git a/arch/arm/mach-s3c2410/include/mach/spi.h b/arch/arm/mach-s3c2410/include/mach/spi.h index 46d46f5b99f..774f3adfe8a 100644 --- a/arch/arm/mach-s3c2410/include/mach/spi.h +++ b/arch/arm/mach-s3c2410/include/mach/spi.h @@ -22,5 +22,12 @@ struct s3c2410_spi_info { void (*set_cs)(struct s3c2410_spi_info *spi, int cs, int pol); }; +/* Standard setup / suspend routines for SPI GPIO pins. */ + +extern void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, + int enable); + +extern void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, + int enable); #endif /* __ASM_ARCH_SPI_H */ diff --git a/arch/arm/mach-s3c2410/include/mach/system-reset.h b/arch/arm/mach-s3c2410/include/mach/system-reset.h index 43535a0e718..7613d0a384b 100644 --- a/arch/arm/mach-s3c2410/include/mach/system-reset.h +++ b/arch/arm/mach-s3c2410/include/mach/system-reset.h @@ -13,7 +13,7 @@ #include <mach/hardware.h> #include <linux/io.h> -#include <asm/plat-s3c/regs-watchdog.h> +#include <plat/regs-watchdog.h> #include <mach/regs-clock.h> #include <linux/clk.h> diff --git a/arch/arm/mach-s3c2410/include/mach/tick.h b/arch/arm/mach-s3c2410/include/mach/tick.h new file mode 100644 index 00000000000..544da41979d --- /dev/null +++ b/arch/arm/mach-s3c2410/include/mach/tick.h @@ -0,0 +1,15 @@ +/* linux/arch/arm/mach-s3c2410/include/mach/tick.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C2410 - timer tick support + */ + +#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0)) + +static inline int s3c24xx_ostimer_pending(void) +{ + return __raw_readl(S3C2410_SRCPND) & SRCPND_TIMER4; +} diff --git a/arch/arm/mach-s3c2410/include/mach/uncompress.h b/arch/arm/mach-s3c2410/include/mach/uncompress.h index ab39491beee..c9432103750 100644 --- a/arch/arm/mach-s3c2410/include/mach/uncompress.h +++ b/arch/arm/mach-s3c2410/include/mach/uncompress.h @@ -1,3 +1,4 @@ + /* arch/arm/mach-s3c2410/include/mach/uncompress.h * * Copyright (c) 2003, 2007 Simtec Electronics diff --git a/arch/arm/mach-s3c2410/mach-amlm5900.c b/arch/arm/mach-s3c2410/mach-amlm5900.c index d061fea0190..6d6995afeb4 100644 --- a/arch/arm/mach-s3c2410/mach-amlm5900.c +++ b/arch/arm/mach-s3c2410/mach-amlm5900.c @@ -52,6 +52,7 @@ #include <mach/regs-lcd.h> #include <mach/regs-gpio.h> +#include <plat/iic.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -150,7 +151,7 @@ static struct platform_device *amlm5900_devices[] __initdata = { #endif &s3c_device_adc, &s3c_device_wdt, - &s3c_device_i2c, + &s3c_device_i2c0, &s3c_device_usb, &s3c_device_rtc, &s3c_device_usbgadget, @@ -233,6 +234,7 @@ static void __init amlm5900_init(void) #ifdef CONFIG_FB_S3C2410 s3c24xx_fb_set_platdata(&amlm5900_fb_info); #endif + s3c_i2c0_set_platdata(NULL); platform_add_devices(amlm5900_devices, ARRAY_SIZE(amlm5900_devices)); } diff --git a/arch/arm/mach-s3c2410/mach-bast.c b/arch/arm/mach-s3c2410/mach-bast.c index 8db9c700e3c..01bd76725b9 100644 --- a/arch/arm/mach-s3c2410/mach-bast.c +++ b/arch/arm/mach-s3c2410/mach-bast.c @@ -44,8 +44,8 @@ #include <mach/regs-mem.h> #include <mach/regs-lcd.h> -#include <asm/plat-s3c/nand.h> -#include <asm/plat-s3c/iic.h> +#include <plat/nand.h> +#include <plat/iic.h> #include <mach/fb.h> #include <linux/mtd/mtd.h> @@ -406,7 +406,7 @@ static struct platform_device bast_sio = { * standard 100KHz i2c bus frequency */ -static struct s3c2410_platform_i2c bast_i2c_info = { +static struct s3c2410_platform_i2c __initdata bast_i2c_info = { .flags = 0, .slave_addr = 0x10, .bus_freq = 100*1000, @@ -553,7 +553,7 @@ static struct platform_device *bast_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, - &s3c_device_i2c, + &s3c_device_i2c0, &s3c_device_rtc, &s3c_device_nand, &bast_device_dm9k, @@ -588,7 +588,8 @@ static void __init bast_map_io(void) s3c24xx_register_clocks(bast_clocks, ARRAY_SIZE(bast_clocks)); s3c_device_nand.dev.platform_data = &bast_nand_info; - s3c_device_i2c.dev.platform_data = &bast_i2c_info; + + s3c_i2c0_set_platdata(&bast_i2c_info); s3c24xx_init_io(bast_iodesc, ARRAY_SIZE(bast_iodesc)); s3c24xx_init_clocks(0); diff --git a/arch/arm/mach-s3c2410/mach-h1940.c b/arch/arm/mach-s3c2410/mach-h1940.c index 98716d0108e..821a1668c3a 100644 --- a/arch/arm/mach-s3c2410/mach-h1940.c +++ b/arch/arm/mach-s3c2410/mach-h1940.c @@ -38,11 +38,13 @@ #include <mach/h1940.h> #include <mach/h1940-latch.h> #include <mach/fb.h> -#include <asm/plat-s3c24xx/udc.h> +#include <plat/udc.h> +#include <plat/iic.h> #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/pll.h> #include <plat/pm.h> static struct map_desc h1940_iodesc[] __initdata = { @@ -183,7 +185,7 @@ static struct platform_device *h1940_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, - &s3c_device_i2c, + &s3c_device_i2c0, &s3c_device_iis, &s3c_device_usbgadget, &s3c_device_leds, @@ -215,6 +217,7 @@ static void __init h1940_init(void) s3c24xx_fb_set_platdata(&h1940_fb_info); s3c24xx_udc_set_platdata(&h1940_udc_cfg); + s3c_i2c0_set_platdata(NULL); /* Turn off suspend on both USB ports, and switch the * selectable USB port to USB device mode. */ @@ -223,10 +226,9 @@ static void __init h1940_init(void) S3C2410_MISCCR_USBSUSPND0 | S3C2410_MISCCR_USBSUSPND1, 0x0); - tmp = ( - 0x78 << S3C2410_PLLCON_MDIVSHIFT) - | (0x02 << S3C2410_PLLCON_PDIVSHIFT) - | (0x03 << S3C2410_PLLCON_SDIVSHIFT); + tmp = (0x78 << S3C24XX_PLLCON_MDIVSHIFT) + | (0x02 << S3C24XX_PLLCON_PDIVSHIFT) + | (0x03 << S3C24XX_PLLCON_SDIVSHIFT); writel(tmp, S3C2410_UPLLCON); platform_add_devices(h1940_devices, ARRAY_SIZE(h1940_devices)); diff --git a/arch/arm/mach-s3c2410/mach-n30.c b/arch/arm/mach-s3c2410/mach-n30.c index 82505517846..1269e59d294 100644 --- a/arch/arm/mach-s3c2410/mach-n30.c +++ b/arch/arm/mach-s3c2410/mach-n30.c @@ -40,14 +40,14 @@ #include <asm/mach/irq.h> #include <asm/mach/map.h> -#include <asm/plat-s3c/iic.h> +#include <plat/iic.h> #include <plat/regs-serial.h> #include <plat/clock.h> #include <plat/cpu.h> #include <plat/devs.h> #include <plat/s3c2410.h> -#include <asm/plat-s3c24xx/udc.h> +#include <plat/udc.h> static struct map_desc n30_iodesc[] __initdata = { /* nothing here yet */ @@ -320,7 +320,7 @@ static struct s3c2410fb_mach_info n30_fb_info __initdata = { static struct platform_device *n30_devices[] __initdata = { &s3c_device_lcd, &s3c_device_wdt, - &s3c_device_i2c, + &s3c_device_i2c0, &s3c_device_iis, &s3c_device_usb, &s3c_device_usbgadget, @@ -332,7 +332,7 @@ static struct platform_device *n30_devices[] __initdata = { static struct platform_device *n35_devices[] __initdata = { &s3c_device_lcd, &s3c_device_wdt, - &s3c_device_i2c, + &s3c_device_i2c0, &s3c_device_iis, &s3c_device_usbgadget, &n35_button_device, @@ -501,7 +501,7 @@ static void __init n30_init_irq(void) static void __init n30_init(void) { s3c24xx_fb_set_platdata(&n30_fb_info); - s3c_device_i2c.dev.platform_data = &n30_i2ccfg; + s3c_device_i2c0.dev.platform_data = &n30_i2ccfg; s3c24xx_udc_set_platdata(&n30_udc_cfg); /* Turn off suspend on both USB ports, and switch the diff --git a/arch/arm/mach-s3c2410/mach-otom.c b/arch/arm/mach-s3c2410/mach-otom.c index d8255cf87e4..f6c7261a4a1 100644 --- a/arch/arm/mach-s3c2410/mach-otom.c +++ b/arch/arm/mach-s3c2410/mach-otom.c @@ -35,6 +35,7 @@ #include <plat/s3c2410.h> #include <plat/clock.h> #include <plat/devs.h> +#include <plat/iic.h> #include <plat/cpu.h> static struct map_desc otom11_iodesc[] __initdata = { @@ -94,7 +95,7 @@ static struct platform_device *otom11_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, - &s3c_device_i2c, + &s3c_device_i2c0, &s3c_device_iis, &s3c_device_rtc, &otom_device_nor, @@ -109,6 +110,7 @@ static void __init otom11_map_io(void) static void __init otom11_init(void) { + s3c_i2c0_set_platdata(NULL); platform_add_devices(otom11_devices, ARRAY_SIZE(otom11_devices)); } diff --git a/arch/arm/mach-s3c2410/mach-qt2410.c b/arch/arm/mach-s3c2410/mach-qt2410.c index 661807e14e8..9678a53ceeb 100644 --- a/arch/arm/mach-s3c2410/mach-qt2410.c +++ b/arch/arm/mach-s3c2410/mach-qt2410.c @@ -50,10 +50,11 @@ #include <mach/leds-gpio.h> #include <plat/regs-serial.h> #include <mach/fb.h> -#include <asm/plat-s3c/nand.h> -#include <asm/plat-s3c24xx/udc.h> +#include <plat/nand.h> +#include <plat/udc.h> #include <mach/spi.h> #include <mach/spi-gpio.h> +#include <plat/iic.h> #include <plat/common-smdk.h> #include <plat/devs.h> @@ -247,7 +248,7 @@ static struct platform_device *qt2410_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, - &s3c_device_i2c, + &s3c_device_i2c0, &s3c_device_iis, &s3c_device_sdi, &s3c_device_usbgadget, @@ -349,6 +350,7 @@ static void __init qt2410_machine_init(void) s3c2410_gpio_setpin(S3C2410_GPB0, 1); s3c24xx_udc_set_platdata(&qt2410_udc_cfg); + s3c_i2c0_set_platdata(NULL); s3c2410_gpio_cfgpin(S3C2410_GPB5, S3C2410_GPIO_OUTPUT); diff --git a/arch/arm/mach-s3c2410/mach-smdk2410.c b/arch/arm/mach-s3c2410/mach-smdk2410.c index 152527bb287..c49126ccb1d 100644 --- a/arch/arm/mach-s3c2410/mach-smdk2410.c +++ b/arch/arm/mach-s3c2410/mach-smdk2410.c @@ -47,6 +47,7 @@ #include <asm/mach-types.h> #include <plat/regs-serial.h> +#include <plat/iic.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -89,7 +90,7 @@ static struct platform_device *smdk2410_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, - &s3c_device_i2c, + &s3c_device_i2c0, &s3c_device_iis, }; @@ -102,6 +103,7 @@ static void __init smdk2410_map_io(void) static void __init smdk2410_init(void) { + s3c_i2c0_set_platdata(NULL); platform_add_devices(smdk2410_devices, ARRAY_SIZE(smdk2410_devices)); smdk_machine_init(); } diff --git a/arch/arm/mach-s3c2410/mach-tct_hammer.c b/arch/arm/mach-s3c2410/mach-tct_hammer.c index 309dcf4c870..8fdb0430bd4 100644 --- a/arch/arm/mach-s3c2410/mach-tct_hammer.c +++ b/arch/arm/mach-s3c2410/mach-tct_hammer.c @@ -45,6 +45,7 @@ #include <asm/mach-types.h> #include <plat/regs-serial.h> +#include <plat/iic.h> #include <plat/devs.h> #include <plat/cpu.h> @@ -127,7 +128,7 @@ static struct s3c2410_uartcfg tct_hammer_uartcfgs[] = { static struct platform_device *tct_hammer_devices[] __initdata = { &s3c_device_adc, &s3c_device_wdt, - &s3c_device_i2c, + &s3c_device_i2c0, &s3c_device_usb, &s3c_device_rtc, &s3c_device_usbgadget, @@ -146,6 +147,7 @@ static void __init tct_hammer_map_io(void) static void __init tct_hammer_init(void) { + s3c_i2c0_set_platdata(NULL); platform_add_devices(tct_hammer_devices, ARRAY_SIZE(tct_hammer_devices)); } diff --git a/arch/arm/mach-s3c2410/mach-vr1000.c b/arch/arm/mach-s3c2410/mach-vr1000.c index 941353af16d..61a1ea9c5c5 100644 --- a/arch/arm/mach-s3c2410/mach-vr1000.c +++ b/arch/arm/mach-s3c2410/mach-vr1000.c @@ -47,6 +47,7 @@ #include <plat/clock.h> #include <plat/devs.h> #include <plat/cpu.h> +#include <plat/iic.h> #include "usb-simtec.h" #include "nor-simtec.h" @@ -334,7 +335,7 @@ static struct platform_device *vr1000_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, - &s3c_device_i2c, + &s3c_device_i2c0, &s3c_device_adc, &serial_device, &vr1000_dm9k0, @@ -384,6 +385,7 @@ static void __init vr1000_map_io(void) static void __init vr1000_init(void) { + s3c_i2c0_set_platdata(NULL); platform_add_devices(vr1000_devices, ARRAY_SIZE(vr1000_devices)); i2c_register_board_info(0, vr1000_i2c_devs, diff --git a/arch/arm/mach-s3c2410/s3c2410.c b/arch/arm/mach-s3c2410/s3c2410.c index ac79b536c4c..feb141b1f91 100644 --- a/arch/arm/mach-s3c2410/s3c2410.c +++ b/arch/arm/mach-s3c2410/s3c2410.c @@ -16,6 +16,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/clk.h> #include <linux/sysdev.h> #include <linux/serial_core.h> #include <linux/platform_device.h> @@ -28,6 +29,8 @@ #include <mach/hardware.h> #include <asm/irq.h> +#include <plat/cpu-freq.h> + #include <mach/regs-clock.h> #include <plat/regs-serial.h> @@ -35,6 +38,7 @@ #include <plat/cpu.h> #include <plat/devs.h> #include <plat/clock.h> +#include <plat/pll.h> /* Initial IO mappings */ @@ -59,25 +63,28 @@ void __init s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no) * machine specific initialisation. */ -void __init s3c2410_map_io(struct map_desc *mach_desc, int mach_size) +void __init s3c2410_map_io(void) { - /* register our io-tables */ - iotable_init(s3c2410_iodesc, ARRAY_SIZE(s3c2410_iodesc)); - iotable_init(mach_desc, mach_size); } -void __init s3c2410_init_clocks(int xtal) +void __init_or_cpufreq s3c2410_setup_clocks(void) { + struct clk *xtal_clk; unsigned long tmp; + unsigned long xtal; unsigned long fclk; unsigned long hclk; unsigned long pclk; + xtal_clk = clk_get(NULL, "xtal"); + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + /* now we've got our machine bits initialised, work out what * clocks we've got */ - fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal); + fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal); tmp = __raw_readl(S3C2410_CLKDIVN); @@ -95,7 +102,13 @@ void __init s3c2410_init_clocks(int xtal) * console to use them */ - s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); + s3c24xx_setup_clocks(fclk, hclk, pclk); +} + +void __init s3c2410_init_clocks(int xtal) +{ + s3c24xx_register_baseclocks(xtal); + s3c2410_setup_clocks(); s3c2410_baseclk_add(); } diff --git a/arch/arm/mach-s3c2412/clock.c b/arch/arm/mach-s3c2412/clock.c index 96d9eb15424..3ce15e082e7 100644 --- a/arch/arm/mach-s3c2412/clock.c +++ b/arch/arm/mach-s3c2412/clock.c @@ -93,12 +93,6 @@ static int s3c2412_upll_enable(struct clk *clk, int enable) /* clock selections */ -/* CPU EXTCLK input */ -static struct clk clk_ext = { - .name = "extclk", - .id = -1, -}; - static struct clk clk_erefclk = { .name = "erefclk", .id = -1, diff --git a/arch/arm/mach-s3c2412/dma.c b/arch/arm/mach-s3c2412/dma.c index ba0591e71f3..f8b2dd4a363 100644 --- a/arch/arm/mach-s3c2412/dma.c +++ b/arch/arm/mach-s3c2412/dma.c @@ -26,13 +26,13 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c/regs-ac97.h> +#include <plat/regs-ac97.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> #include <asm/plat-s3c24xx/regs-s3c2412-iis.h> #include <asm/plat-s3c24xx/regs-iis.h> -#include <asm/plat-s3c24xx/regs-spi.h> +#include <plat/regs-spi.h> #define MAP(x) { (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID, (x)| DMA_CH_VALID } diff --git a/arch/arm/mach-s3c2412/mach-jive.c b/arch/arm/mach-s3c2412/mach-jive.c index b08f18c8c47..e08a0f06224 100644 --- a/arch/arm/mach-s3c2412/mach-jive.c +++ b/arch/arm/mach-s3c2412/mach-jive.c @@ -31,8 +31,8 @@ #include <asm/mach/irq.h> #include <plat/regs-serial.h> -#include <asm/plat-s3c/nand.h> -#include <asm/plat-s3c/iic.h> +#include <plat/nand.h> +#include <plat/iic.h> #include <mach/regs-power.h> #include <mach/regs-gpio.h> @@ -52,7 +52,8 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pm.h> -#include <asm/plat-s3c24xx/udc.h> +#include <plat/udc.h> +#include <plat/iic.h> static struct map_desc jive_iodesc[] __initdata = { }; @@ -450,14 +451,14 @@ static struct spi_board_info __initdata jive_spi_devs[] = { /* I2C bus and device configuration. */ -static struct s3c2410_platform_i2c jive_i2c_cfg = { +static struct s3c2410_platform_i2c jive_i2c_cfg __initdata = { .max_freq = 80 * 1000, .bus_freq = 50 * 1000, .flags = S3C_IICFLG_FILTER, .sda_delay = 2, }; -static struct i2c_board_info jive_i2c_devs[] = { +static struct i2c_board_info jive_i2c_devs[] __initdata = { [0] = { I2C_BOARD_INFO("lis302dl", 0x1c), .irq = IRQ_EINT14, @@ -470,7 +471,7 @@ static struct platform_device *jive_devices[] __initdata = { &s3c_device_usb, &s3c_device_rtc, &s3c_device_wdt, - &s3c_device_i2c, + &s3c_device_i2c0, &s3c_device_lcd, &jive_device_lcdspi, &jive_device_wm8750, @@ -663,7 +664,7 @@ static void __init jive_machine_init(void) spi_register_board_info(jive_spi_devs, ARRAY_SIZE(jive_spi_devs)); - s3c_device_i2c.dev.platform_data = &jive_i2c_cfg; + s3c_i2c0_set_platdata(&jive_i2c_cfg); i2c_register_board_info(0, jive_i2c_devs, ARRAY_SIZE(jive_i2c_devs)); pm_power_off = jive_power_off; diff --git a/arch/arm/mach-s3c2412/mach-smdk2413.c b/arch/arm/mach-s3c2412/mach-smdk2413.c index c719b5a740a..eba66aa6bd2 100644 --- a/arch/arm/mach-s3c2412/mach-smdk2413.c +++ b/arch/arm/mach-s3c2412/mach-smdk2413.c @@ -37,7 +37,8 @@ #include <mach/regs-lcd.h> #include <mach/idle.h> -#include <asm/plat-s3c24xx/udc.h> +#include <plat/udc.h> +#include <plat/iic.h> #include <mach/fb.h> #include <plat/s3c2410.h> @@ -105,7 +106,7 @@ static struct platform_device *smdk2413_devices[] __initdata = { &s3c_device_usb, //&s3c_device_lcd, &s3c_device_wdt, - &s3c_device_i2c, + &s3c_device_i2c0, &s3c_device_iis, &s3c_device_usbgadget, }; @@ -142,6 +143,7 @@ static void __init smdk2413_machine_init(void) s3c24xx_udc_set_platdata(&smdk2413_udc_cfg); + s3c_i2c0_set_platdata(NULL); platform_add_devices(smdk2413_devices, ARRAY_SIZE(smdk2413_devices)); smdk_machine_init(); diff --git a/arch/arm/mach-s3c2412/mach-vstms.c b/arch/arm/mach-s3c2412/mach-vstms.c index 4cfa19ad9be..11e8ad49fc7 100644 --- a/arch/arm/mach-s3c2412/mach-vstms.c +++ b/arch/arm/mach-s3c2412/mach-vstms.c @@ -39,7 +39,8 @@ #include <mach/idle.h> #include <mach/fb.h> -#include <asm/plat-s3c/nand.h> +#include <plat/iic.h> +#include <plat/nand.h> #include <plat/s3c2410.h> #include <plat/s3c2412.h> @@ -122,7 +123,7 @@ static struct s3c2410_platform_nand vstms_nand_info = { static struct platform_device *vstms_devices[] __initdata = { &s3c_device_usb, &s3c_device_wdt, - &s3c_device_i2c, + &s3c_device_i2c0, &s3c_device_iis, &s3c_device_rtc, &s3c_device_nand, @@ -151,6 +152,7 @@ static void __init vstms_map_io(void) static void __init vstms_init(void) { + s3c_i2c0_set_platdata(NULL); platform_add_devices(vstms_devices, ARRAY_SIZE(vstms_devices)); } diff --git a/arch/arm/mach-s3c2412/s3c2412.c b/arch/arm/mach-s3c2412/s3c2412.c index 313759c3da6..5b5aba69ec3 100644 --- a/arch/arm/mach-s3c2412/s3c2412.c +++ b/arch/arm/mach-s3c2412/s3c2412.c @@ -16,6 +16,7 @@ #include <linux/list.h> #include <linux/timer.h> #include <linux/init.h> +#include <linux/clk.h> #include <linux/delay.h> #include <linux/sysdev.h> #include <linux/serial_core.h> @@ -33,13 +34,15 @@ #include <mach/reset.h> #include <mach/idle.h> +#include <plat/cpu-freq.h> + #include <mach/regs-clock.h> #include <plat/regs-serial.h> #include <mach/regs-power.h> #include <mach/regs-gpio.h> #include <mach/regs-gpioj.h> #include <mach/regs-dsc.h> -#include <asm/plat-s3c24xx/regs-spi.h> +#include <plat/regs-spi.h> #include <mach/regs-s3c2412.h> #include <plat/s3c2412.h> @@ -47,6 +50,7 @@ #include <plat/devs.h> #include <plat/clock.h> #include <plat/pm.h> +#include <plat/pll.h> #ifndef CONFIG_CPU_S3C2412_ONLY void __iomem *s3c24xx_va_gpio2 = S3C24XX_VA_GPIO; @@ -136,7 +140,7 @@ static void s3c2412_hard_reset(void) * machine specific initialisation. */ -void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size) +void __init s3c2412_map_io(void) { /* move base of IO */ @@ -153,20 +157,25 @@ void __init s3c2412_map_io(struct map_desc *mach_desc, int mach_size) /* register our io-tables */ iotable_init(s3c2412_iodesc, ARRAY_SIZE(s3c2412_iodesc)); - iotable_init(mach_desc, mach_size); } -void __init s3c2412_init_clocks(int xtal) +void __init_or_cpufreq s3c2412_setup_clocks(void) { + struct clk *xtal_clk; unsigned long tmp; + unsigned long xtal; unsigned long fclk; unsigned long hclk; unsigned long pclk; + xtal_clk = clk_get(NULL, "xtal"); + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + /* now we've got our machine bits initialised, work out what * clocks we've got */ - fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal*2); + fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal * 2); clk_mpll.rate = fclk; @@ -183,11 +192,17 @@ void __init s3c2412_init_clocks(int xtal) printk("S3C2412: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); + s3c24xx_setup_clocks(fclk, hclk, pclk); +} + +void __init s3c2412_init_clocks(int xtal) +{ /* initialise the clocks here, to allow other things like the * console to use them */ - s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); + s3c24xx_register_baseclocks(xtal); + s3c2412_setup_clocks(); s3c2412_baseclk_add(); } diff --git a/arch/arm/mach-s3c2440/Kconfig b/arch/arm/mach-s3c2440/Kconfig index 25de042ab99..ad52b3c0f47 100644 --- a/arch/arm/mach-s3c2440/Kconfig +++ b/arch/arm/mach-s3c2440/Kconfig @@ -28,6 +28,7 @@ menu "S3C2440 Machines" config MACH_ANUBIS bool "Simtec Electronics ANUBIS" select CPU_S3C2440 + select S3C24XX_DCLK select PM_SIMTEC if PM select HAVE_PATA_PLATFORM help @@ -37,6 +38,7 @@ config MACH_ANUBIS config MACH_OSIRIS bool "Simtec IM2440D20 (OSIRIS) module" select CPU_S3C2440 + select S3C24XX_DCLK select PM_SIMTEC if PM help Say Y here if you are using the Simtec IM2440D20 module, also diff --git a/arch/arm/mach-s3c2440/dma.c b/arch/arm/mach-s3c2440/dma.c index 32303f6a832..53be553bfc2 100644 --- a/arch/arm/mach-s3c2440/dma.c +++ b/arch/arm/mach-s3c2440/dma.c @@ -25,12 +25,12 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c/regs-ac97.h> +#include <plat/regs-ac97.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> #include <asm/plat-s3c24xx/regs-iis.h> -#include <asm/plat-s3c24xx/regs-spi.h> +#include <plat/regs-spi.h> static struct s3c24xx_dma_map __initdata s3c2440_dma_mappings[] = { [DMACH_XD0] = { diff --git a/arch/arm/mach-s3c2440/mach-anubis.c b/arch/arm/mach-s3c2440/mach-anubis.c index e2beca47048..a9bbc41c456 100644 --- a/arch/arm/mach-s3c2440/mach-anubis.c +++ b/arch/arm/mach-s3c2440/mach-anubis.c @@ -39,7 +39,8 @@ #include <mach/regs-gpio.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> -#include <asm/plat-s3c/nand.h> +#include <plat/nand.h> +#include <plat/iic.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -404,7 +405,7 @@ static struct platform_device *anubis_devices[] __initdata = { &s3c_device_usb, &s3c_device_wdt, &s3c_device_adc, - &s3c_device_i2c, + &s3c_device_i2c0, &s3c_device_rtc, &s3c_device_nand, &anubis_device_ide0, @@ -468,6 +469,7 @@ static void __init anubis_map_io(void) static void __init anubis_init(void) { + s3c_i2c0_set_platdata(NULL); platform_add_devices(anubis_devices, ARRAY_SIZE(anubis_devices)); i2c_register_board_info(0, anubis_i2c_devs, diff --git a/arch/arm/mach-s3c2440/mach-at2440evb.c b/arch/arm/mach-s3c2440/mach-at2440evb.c index 66876c6f2f1..55e07ae5ab8 100644 --- a/arch/arm/mach-s3c2440/mach-at2440evb.c +++ b/arch/arm/mach-s3c2440/mach-at2440evb.c @@ -35,7 +35,8 @@ #include <mach/regs-gpio.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> -#include <asm/plat-s3c/nand.h> +#include <plat/nand.h> +#include <plat/iic.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -166,7 +167,7 @@ static struct platform_device *at2440evb_devices[] __initdata = { &s3c_device_usb, &s3c_device_wdt, &s3c_device_adc, - &s3c_device_i2c, + &s3c_device_i2c0, &s3c_device_rtc, &s3c_device_nand, &at2440evb_device_eth, @@ -183,6 +184,7 @@ static void __init at2440evb_map_io(void) static void __init at2440evb_init(void) { + s3c_i2c0_set_platdata(NULL); platform_add_devices(at2440evb_devices, ARRAY_SIZE(at2440evb_devices)); } diff --git a/arch/arm/mach-s3c2440/mach-nexcoder.c b/arch/arm/mach-s3c2440/mach-nexcoder.c index a546307fd53..7aeaa972d7f 100644 --- a/arch/arm/mach-s3c2440/mach-nexcoder.c +++ b/arch/arm/mach-s3c2440/mach-nexcoder.c @@ -37,6 +37,7 @@ //#include <asm/debug-ll.h> #include <mach/regs-gpio.h> #include <plat/regs-serial.h> +#include <plat/iic.h> #include <plat/s3c2410.h> #include <plat/s3c2440.h> @@ -107,7 +108,7 @@ static struct platform_device *nexcoder_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, - &s3c_device_i2c, + &s3c_device_i2c0, &s3c_device_iis, &s3c_device_rtc, &s3c_device_camif, @@ -142,6 +143,7 @@ static void __init nexcoder_map_io(void) static void __init nexcoder_init(void) { + s3c_i2c0_set_platdata(NULL); platform_add_devices(nexcoder_devices, ARRAY_SIZE(nexcoder_devices)); }; diff --git a/arch/arm/mach-s3c2440/mach-osiris.c b/arch/arm/mach-s3c2440/mach-osiris.c index 2361d606abc..41a00f57e5d 100644 --- a/arch/arm/mach-s3c2440/mach-osiris.c +++ b/arch/arm/mach-s3c2440/mach-osiris.c @@ -37,7 +37,8 @@ #include <mach/regs-gpio.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> -#include <asm/plat-s3c/nand.h> +#include <plat/nand.h> +#include <plat/iic.h> #include <linux/mtd/mtd.h> #include <linux/mtd/nand.h> @@ -335,7 +336,7 @@ static struct i2c_board_info osiris_i2c_devs[] __initdata = { /* Standard Osiris devices */ static struct platform_device *osiris_devices[] __initdata = { - &s3c_device_i2c, + &s3c_device_i2c0, &s3c_device_wdt, &s3c_device_nand, &osiris_pcmcia, @@ -398,6 +399,8 @@ static void __init osiris_init(void) sysdev_class_register(&osiris_pm_sysclass); sysdev_register(&osiris_pm_sysdev); + s3c_i2c0_set_platdata(NULL); + i2c_register_board_info(0, osiris_i2c_devs, ARRAY_SIZE(osiris_i2c_devs)); diff --git a/arch/arm/mach-s3c2440/mach-rx3715.c b/arch/arm/mach-s3c2440/mach-rx3715.c index 4d14c7cff89..12d378f84ad 100644 --- a/arch/arm/mach-s3c2440/mach-rx3715.c +++ b/arch/arm/mach-s3c2440/mach-rx3715.c @@ -42,7 +42,7 @@ #include <mach/regs-lcd.h> #include <mach/h1940.h> -#include <asm/plat-s3c/nand.h> +#include <plat/nand.h> #include <mach/fb.h> #include <plat/clock.h> @@ -179,7 +179,7 @@ static struct platform_device *rx3715_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, - &s3c_device_i2c, + &s3c_device_i2c0, &s3c_device_iis, &s3c_device_nand, }; diff --git a/arch/arm/mach-s3c2440/mach-smdk2440.c b/arch/arm/mach-s3c2440/mach-smdk2440.c index fefeaaa4155..db6eafbd4d9 100644 --- a/arch/arm/mach-s3c2440/mach-smdk2440.c +++ b/arch/arm/mach-s3c2440/mach-smdk2440.c @@ -37,6 +37,7 @@ #include <mach/idle.h> #include <mach/fb.h> +#include <plat/iic.h> #include <plat/s3c2410.h> #include <plat/s3c2440.h> @@ -152,7 +153,7 @@ static struct platform_device *smdk2440_devices[] __initdata = { &s3c_device_usb, &s3c_device_lcd, &s3c_device_wdt, - &s3c_device_i2c, + &s3c_device_i2c0, &s3c_device_iis, }; @@ -166,6 +167,7 @@ static void __init smdk2440_map_io(void) static void __init smdk2440_machine_init(void) { s3c24xx_fb_set_platdata(&smdk2440_fb_info); + s3c_i2c0_set_platdata(NULL); platform_add_devices(smdk2440_devices, ARRAY_SIZE(smdk2440_devices)); smdk_machine_init(); diff --git a/arch/arm/mach-s3c2443/Kconfig b/arch/arm/mach-s3c2443/Kconfig index 14252f57375..212141baebe 100644 --- a/arch/arm/mach-s3c2443/Kconfig +++ b/arch/arm/mach-s3c2443/Kconfig @@ -24,6 +24,7 @@ config MACH_SMDK2443 bool "SMDK2443" select CPU_S3C2443 select MACH_SMDK + select S3C_DEV_HSMMC help Say Y here if you are using an SMDK2443 diff --git a/arch/arm/mach-s3c2443/clock.c b/arch/arm/mach-s3c2443/clock.c index f854e7385e3..363f3960878 100644 --- a/arch/arm/mach-s3c2443/clock.c +++ b/arch/arm/mach-s3c2443/clock.c @@ -39,6 +39,8 @@ #include <mach/regs-s3c2443-clock.h> +#include <plat/cpu-freq.h> + #include <plat/s3c2443.h> #include <plat/clock.h> #include <plat/cpu.h> @@ -145,12 +147,6 @@ static unsigned long s3c2443_roundrate_clksrc256(struct clk *clk, /* clock selections */ -/* CPU EXTCLK input */ -static struct clk clk_ext = { - .name = "ext", - .id = -1, -}; - static struct clk clk_mpllref = { .name = "mpllref", .parent = &clk_xtal, @@ -165,14 +161,6 @@ static struct clk clk_mpll = { }; #endif -static struct clk clk_epllref; - -static struct clk clk_epll = { - .name = "epll", - .parent = &clk_epllref, - .id = -1, -}; - static struct clk clk_i2s_ext = { .name = "i2s-ext", .id = -1, @@ -1011,22 +999,20 @@ static struct clk *clks[] __initdata = { &clk_prediv, }; -void __init s3c2443_init_clocks(int xtal) +void __init_or_cpufreq s3c2443_setup_clocks(void) { - unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); unsigned long mpllcon = __raw_readl(S3C2443_MPLLCON); unsigned long clkdiv0 = __raw_readl(S3C2443_CLKDIV0); + struct clk *xtal_clk; + unsigned long xtal; unsigned long pll; unsigned long fclk; unsigned long hclk; unsigned long pclk; - struct clk *clkp; - int ret; - int ptr; - /* s3c2443 parents h and p clocks from prediv */ - clk_h.parent = &clk_prediv; - clk_p.parent = &clk_prediv; + xtal_clk = clk_get(NULL, "xtal"); + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); pll = s3c2443_get_mpll(mpllcon, xtal); clk_msysclk.rate = pll; @@ -1036,13 +1022,29 @@ void __init s3c2443_init_clocks(int xtal) hclk /= s3c2443_get_hdiv(clkdiv0); pclk = hclk / ((clkdiv0 & S3C2443_CLKDIV0_HALF_PCLK) ? 2 : 1); - s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); + s3c24xx_setup_clocks(fclk, hclk, pclk); printk("S3C2443: mpll %s %ld.%03ld MHz, cpu %ld.%03ld MHz, mem %ld.%03ld MHz, pclk %ld.%03ld MHz\n", (mpllcon & S3C2443_PLLCON_OFF) ? "off":"on", print_mhz(pll), print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); + s3c24xx_setup_clocks(fclk, hclk, pclk); +} + +void __init s3c2443_init_clocks(int xtal) +{ + struct clk *clkp; + unsigned long epllcon = __raw_readl(S3C2443_EPLLCON); + int ret; + int ptr; + + /* s3c2443 parents h and p clocks from prediv */ + clk_h.parent = &clk_prediv; + clk_p.parent = &clk_prediv; + + s3c24xx_register_baseclocks(xtal); + s3c2443_setup_clocks(); s3c2443_clk_initparents(); for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { @@ -1056,7 +1058,7 @@ void __init s3c2443_init_clocks(int xtal) } clk_epll.rate = s3c2443_get_epll(epllcon, xtal); - + clk_epll.parent = &clk_epllref; clk_usb_bus.parent = &clk_usb_bus_host; /* ensure usb bus clock is within correct rate of 48MHz */ diff --git a/arch/arm/mach-s3c2443/dma.c b/arch/arm/mach-s3c2443/dma.c index f73ccb25ff9..872482f0268 100644 --- a/arch/arm/mach-s3c2443/dma.c +++ b/arch/arm/mach-s3c2443/dma.c @@ -26,12 +26,12 @@ #include <plat/regs-serial.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c/regs-ac97.h> +#include <plat/regs-ac97.h> #include <mach/regs-mem.h> #include <mach/regs-lcd.h> #include <mach/regs-sdi.h> #include <asm/plat-s3c24xx/regs-iis.h> -#include <asm/plat-s3c24xx/regs-spi.h> +#include <plat/regs-spi.h> #define MAP(x) { \ [0] = (x) | DMA_CH_VALID, \ diff --git a/arch/arm/mach-s3c2443/mach-smdk2443.c b/arch/arm/mach-s3c2443/mach-smdk2443.c index a7fe65f3dcc..039a4624310 100644 --- a/arch/arm/mach-s3c2443/mach-smdk2443.c +++ b/arch/arm/mach-s3c2443/mach-smdk2443.c @@ -37,6 +37,7 @@ #include <mach/idle.h> #include <mach/fb.h> +#include <plat/iic.h> #include <plat/s3c2410.h> #include <plat/s3c2440.h> @@ -103,8 +104,8 @@ static struct s3c2410_uartcfg smdk2443_uartcfgs[] __initdata = { static struct platform_device *smdk2443_devices[] __initdata = { &s3c_device_wdt, - &s3c_device_i2c, - &s3c_device_hsmmc, + &s3c_device_i2c0, + &s3c_device_hsmmc0, }; static void __init smdk2443_map_io(void) @@ -116,6 +117,7 @@ static void __init smdk2443_map_io(void) static void __init smdk2443_machine_init(void) { + s3c_i2c0_set_platdata(NULL); platform_add_devices(smdk2443_devices, ARRAY_SIZE(smdk2443_devices)); smdk_machine_init(); } diff --git a/arch/arm/mach-s3c2443/s3c2443.c b/arch/arm/mach-s3c2443/s3c2443.c index bbeddf9ddcb..ce2ec329893 100644 --- a/arch/arm/mach-s3c2443/s3c2443.c +++ b/arch/arm/mach-s3c2443/s3c2443.c @@ -81,10 +81,9 @@ void __init s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no) * machine specific initialisation. */ -void __init s3c2443_map_io(struct map_desc *mach_desc, int mach_size) +void __init s3c2443_map_io(void) { iotable_init(s3c2443_iodesc, ARRAY_SIZE(s3c2443_iodesc)); - iotable_init(mach_desc, mach_size); } /* need to register class before we actually register the device, and diff --git a/arch/arm/mach-s3c24a0/include/mach/debug-macro.S b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S new file mode 100644 index 00000000000..f0ef0ab475f --- /dev/null +++ b/arch/arm/mach-s3c24a0/include/mach/debug-macro.S @@ -0,0 +1,28 @@ +/* arch/arm/mach-s3c2410/include/mach/debug-macro.S + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* pull in the relevant register and map files. */ + +#include <mach/map.h> +#include <plat/regs-serial.h> + + .macro addruart, rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 + ldreq \rx, = S3C24XX_PA_UART + ldrne \rx, = S3C24XX_VA_UART +#if CONFIG_DEBUG_S3C_UART != 0 + add \rx, \rx, #(S3C2410_UART1_OFF * CONFIG_DEBUG_S3C_UART) +#endif + .endm + +/* include the reset of the code which will do the work, we're only + * compiling for a single cpu processor type so the default of s3c2440 + * will be fine with us. + */ + +#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s3c24a0/include/mach/io.h b/arch/arm/mach-s3c24a0/include/mach/io.h new file mode 100644 index 00000000000..c163364773b --- /dev/null +++ b/arch/arm/mach-s3c24a0/include/mach/io.h @@ -0,0 +1,16 @@ +/* arch/arm/mach-s3c24a0/include/mach/io.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben-linux@fluff.org> + * + * IO access and mapping routines for the S3C24A0 + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +/* No current ISA/PCI bus support. */ +#define __io(a) ((void __iomem *)(a)) +#define __mem_pci(a) (a) + +#endif diff --git a/arch/arm/mach-s3c24a0/include/mach/irqs.h b/arch/arm/mach-s3c24a0/include/mach/irqs.h new file mode 100644 index 00000000000..ae8c0e35978 --- /dev/null +++ b/arch/arm/mach-s3c24a0/include/mach/irqs.h @@ -0,0 +1,115 @@ +/* linux/arch/arm/mach-s3c24a0/include/mach/irqs.h + * + * Copyright (c) 2003-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + + +#ifndef __ASM_ARCH_24A0_IRQS_H +#define __ASM_ARCH_24A0_IRQS_H __FILE__ + +#define IRQ_EINT0t2 S3C2410_IRQ(0) /* 16 */ +/* for generic entry-macro.S */ +#define IRQ_EINT0 IRQ_EINT0t2 + +#define IRQ_EINT3t6 S3C2410_IRQ(1) +#define IRQ_EINT7t10 S3C2410_IRQ(2) +#define IRQ_EINT11t14 S3C2410_IRQ(3) +#define IRQ_EINT15t18 S3C2410_IRQ(4) /* 20 */ +#define IRQ_TICK S3C2410_IRQ(5) +#define IRQ_DCTQ S3C2410_IRQ(6) +#define IRQ_MC S3C2410_IRQ(7) +#define IRQ_ME S3C2410_IRQ(8) /* 24 */ +#define IRQ_KEYPAD S3C2410_IRQ(9) +#define IRQ_TIMER0 S3C2410_IRQ(10) +#define IRQ_TIMER1 S3C2410_IRQ(11) +#define IRQ_TIMER2 S3C2410_IRQ(12) +#define IRQ_TIMER3_4 S3C2410_IRQ(13) +#define IRQ_OS_TIMER IRQ_TIMER3_4 +#define IRQ_LCD S3C2410_IRQ(14) +#define IRQ_CAM_C S3C2410_IRQ(15) +#define IRQ_WDT_BATFLT S3C2410_IRQ(16) /* 32 */ +#define IRQ_UART0 S3C2410_IRQ(17) +#define IRQ_CAM_P S3C2410_IRQ(18) +#define IRQ_MODEM S3C2410_IRQ(19) +#define IRQ_DMA S3C2410_IRQ(20) +#define IRQ_SDI S3C2410_IRQ(21) +#define IRQ_SPI0 S3C2410_IRQ(22) +#define IRQ_UART1 S3C2410_IRQ(23) +#define IRQ_AC97_NFLASH S3C2410_IRQ(24) /* 40 */ +#define IRQ_USBD S3C2410_IRQ(25) +#define IRQ_USBH S3C2410_IRQ(26) +#define IRQ_IIC S3C2410_IRQ(27) +#define IRQ_IRDA_MSTICK S3C2410_IRQ(28) /* 44 */ +#define IRQ_VLX_SPI1 S3C2410_IRQ(29) +#define IRQ_RTC S3C2410_IRQ(30) /* 46 */ +#define IRQ_ADC_PEN S3C2410_IRQ(31) + +/* interrupts generated from the external interrupts sources */ +#define IRQ_EINT00 S3C2410_IRQ(32) /* 48 */ +#define IRQ_EINT1 S3C2410_IRQ(33) +#define IRQ_EINT2 S3C2410_IRQ(34) +#define IRQ_EINT3 S3C2410_IRQ(35) +#define IRQ_EINT4 S3C2410_IRQ(36) +#define IRQ_EINT5 S3C2410_IRQ(37) +#define IRQ_EINT6 S3C2410_IRQ(38) +#define IRQ_EINT7 S3C2410_IRQ(39) +#define IRQ_EINT8 S3C2410_IRQ(40) +#define IRQ_EINT9 S3C2410_IRQ(41) +#define IRQ_EINT10 S3C2410_IRQ(42) +#define IRQ_EINT11 S3C2410_IRQ(43) +#define IRQ_EINT12 S3C2410_IRQ(44) +#define IRQ_EINT13 S3C2410_IRQ(45) +#define IRQ_EINT14 S3C2410_IRQ(46) +#define IRQ_EINT15 S3C2410_IRQ(47) +#define IRQ_EINT16 S3C2410_IRQ(48) +#define IRQ_EINT17 S3C2410_IRQ(49) +#define IRQ_EINT18 S3C2410_IRQ(50) + +/* SUB IRQS */ +#define IRQ_S3CUART_RX0 S3C2410_IRQ(51) /* 67 */ +#define IRQ_S3CUART_TX0 S3C2410_IRQ(52) +#define IRQ_S3CUART_ERR0 S3C2410_IRQ(53) + +#define IRQ_S3CUART_RX1 S3C2410_IRQ(54) +#define IRQ_S3CUART_TX1 S3C2410_IRQ(55) +#define IRQ_S3CUART_ERR1 S3C2410_IRQ(56) + +#define IRQ_S3CUART_RX2 (0x0) +#define IRQ_S3CUART_TX2 (0x0) +#define IRQ_S3CUART_ERR2 (0x0) + + +#define IRQ_IRDA S3C2410_IRQ(57) +#define IRQ_MSTICK S3C2410_IRQ(58) +#define IRQ_RESERVED0 S3C2410_IRQ(59) +#define IRQ_RESERVED1 S3C2410_IRQ(60) +#define IRQ_RESERVED2 S3C2410_IRQ(61) +#define IRQ_TIMER3 S3C2410_IRQ(62) +#define IRQ_TIMER4 S3C2410_IRQ(63) +#define IRQ_WDT S3C2410_IRQ(64) +#define IRQ_BATFLT S3C2410_IRQ(65) +#define IRQ_POST S3C2410_IRQ(66) +#define IRQ_DISP_FIFO S3C2410_IRQ(67) +#define IRQ_PENUP S3C2410_IRQ(68) +#define IRQ_PENDN S3C2410_IRQ(69) +#define IRQ_ADC S3C2410_IRQ(70) +#define IRQ_DISP_FRAME S3C2410_IRQ(71) +#define IRQ_NFLASH S3C2410_IRQ(72) +#define IRQ_AC97 S3C2410_IRQ(73) +#define IRQ_SPI1 S3C2410_IRQ(74) +#define IRQ_VLX S3C2410_IRQ(75) +#define IRQ_DMA0 S3C2410_IRQ(76) +#define IRQ_DMA1 S3C2410_IRQ(77) +#define IRQ_DMA2 S3C2410_IRQ(78) +#define IRQ_DMA3 S3C2410_IRQ(79) + +#define IRQ_TC (0x0) + +#define NR_IRQS (IRQ_DMA3+1) + +#endif /* __ASM_ARCH_24A0_IRQS_H */ diff --git a/arch/arm/mach-s3c24a0/include/mach/map.h b/arch/arm/mach-s3c24a0/include/mach/map.h new file mode 100644 index 00000000000..a01132717e3 --- /dev/null +++ b/arch/arm/mach-s3c24a0/include/mach/map.h @@ -0,0 +1,85 @@ +/* linux/arch/arm/mach-s3c24a0/include/mach/map.h + * + * Copyright 2003,2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24A0 - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_24A0_MAP_H +#define __ASM_ARCH_24A0_MAP_H __FILE__ + +#include <plat/map-base.h> +#include <plat/map.h> + +#define S3C24A0_PA_IO_BASE (0x40000000) +#define S3C24A0_PA_CLKPWR (0x40000000) +#define S3C24A0_PA_IRQ (0x40200000) +#define S3C24A0_PA_DMA (0x40400000) +#define S3C24A0_PA_MEMCTRL (0x40C00000) +#define S3C24A0_PA_NAND (0x40C00000) +#define S3C24A0_PA_SROM (0x40C20000) +#define S3C24A0_PA_SDRAM (0x40C40000) +#define S3C24A0_PA_BUSM (0x40CE0000) +#define S3C24A0_PA_USBHOST (0x41000000) +#define S3C24A0_PA_MODEMIF (0x41180000) +#define S3C24A0_PA_IRDA (0x41800000) +#define S3C24A0_PA_TIMER (0x44000000) +#define S3C24A0_PA_WATCHDOG (0x44100000) +#define S3C24A0_PA_RTC (0x44200000) +#define S3C24A0_PA_UART (0x44400000) +#define S3C24A0_PA_UART0 (S3C24A0_PA_UART) +#define S3C24A0_PA_UART1 (S3C24A0_PA_UART + 0x4000) +#define S3C24A0_PA_SPI (0x44500000) +#define S3C24A0_PA_IIC (0x44600000) +#define S3C24A0_PA_IIS (0x44700000) +#define S3C24A0_PA_GPIO (0x44800000) +#define S3C24A0_PA_KEYIF (0x44900000) +#define S3C24A0_PA_USBDEV (0x44A00000) +#define S3C24A0_PA_AC97 (0x45000000) +#define S3C24A0_PA_ADC (0x45800000) +#define S3C24A0_PA_SDI (0x46000000) +#define S3C24A0_PA_MS (0x46100000) +#define S3C24A0_PA_LCD (0x4A000000) +#define S3C24A0_PA_VPOST (0x4A100000) + +/* physical addresses of all the chip-select areas */ + +#define S3C24A0_CS0 (0x00000000) +#define S3C24A0_CS1 (0x04000000) +#define S3C24A0_CS2 (0x08000000) +#define S3C24A0_CS3 (0x0C000000) +#define S3C24A0_CS4 (0x10000000) +#define S3C24A0_CS5 (0x40000000) + +#define S3C24A0_SDRAM_PA (S3C24A0_CS4) + +/* Use a single interface for common resources between S3C24XX cpus */ + +#define S3C24XX_PA_IRQ S3C24A0_PA_IRQ +#define S3C24XX_PA_MEMCTRL S3C24A0_PA_MEMCTRL +#define S3C24XX_PA_USBHOST S3C24A0_PA_USBHOST +#define S3C24XX_PA_DMA S3C24A0_PA_DMA +#define S3C24XX_PA_CLKPWR S3C24A0_PA_CLKPWR +#define S3C24XX_PA_LCD S3C24A0_PA_LCD +#define S3C24XX_PA_UART S3C24A0_PA_UART +#define S3C24XX_PA_TIMER S3C24A0_PA_TIMER +#define S3C24XX_PA_USBDEV S3C24A0_PA_USBDEV +#define S3C24XX_PA_WATCHDOG S3C24A0_PA_WATCHDOG +#define S3C24XX_PA_IIS S3C24A0_PA_IIS +#define S3C24XX_PA_GPIO S3C24A0_PA_GPIO +#define S3C24XX_PA_RTC S3C24A0_PA_RTC +#define S3C24XX_PA_ADC S3C24A0_PA_ADC +#define S3C24XX_PA_SPI S3C24A0_PA_SPI +#define S3C24XX_PA_SDI S3C24A0_PA_SDI +#define S3C24XX_PA_NAND S3C24A0_PA_NAND + +#define S3C_PA_UART S3C24A0_PA_UART +#define S3C_PA_IIC S3C24A0_PA_IIC + +#endif /* __ASM_ARCH_24A0_MAP_H */ diff --git a/arch/arm/mach-s3c24a0/include/mach/memory.h b/arch/arm/mach-s3c24a0/include/mach/memory.h new file mode 100644 index 00000000000..585211ca018 --- /dev/null +++ b/arch/arm/mach-s3c24a0/include/mach/memory.h @@ -0,0 +1,19 @@ +/* linux/arch/arm/mach-s3c24a0/include/mach/memory.h + * from linux/include/asm-arm/arch-rpc/memory.h + * + * Copyright (C) 1996,1997,1998 Russell King. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_24A0_MEMORY_H +#define __ASM_ARCH_24A0_MEMORY_H __FILE__ + +#define PHYS_OFFSET UL(0x10000000) + +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + +#endif diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-clock.h b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h new file mode 100644 index 00000000000..af2abd756c3 --- /dev/null +++ b/arch/arm/mach-s3c24a0/include/mach/regs-clock.h @@ -0,0 +1,88 @@ +/* linux/arch/arm/mach-s3c24a0/include/mach/regs-clock.h + * + * Copyright (c) 2003,2004,2005,2006 Simtec Electronics <linux@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C24A0 clock register definitions +*/ + +#ifndef __ASM_ARCH_24A0_REGS_CLOCK_H +#define __ASM_ARCH_24A0_REGS_CLOCK_H __FILE__ + +#define S3C24A0_MPLLCON S3C2410_CLKREG(0x10) +#define S3C24A0_UPLLCON S3C2410_CLKREG(0x14) +#define S3C24A0_CLKCON S3C2410_CLKREG(0x20) +#define S3C24A0_CLKSRC S3C2410_CLKREG(0x24) +#define S3C24A0_CLKDIVN S3C2410_CLKREG(0x28) + +/* CLKCON register bits */ + +#define S3C24A0_CLKCON_VLX (1<<29) +#define S3C24A0_CLKCON_VPOST (1<<28) +#define S3C24A0_CLKCON_WDT (1<<27) /* reserved */ +#define S3C24A0_CLKCON_MPEGDCTQ (1<<26) +#define S3C24A0_CLKCON_VPOSTIF (1<<25) +#define S3C24A0_CLKCON_MPEG4IF (1<<24) +#define S3C24A0_CLKCON_CAM_UPLL (1<<23) +#define S3C24A0_CLKCON_LCDC (1<<22) +#define S3C24A0_CLKCON_CAM_HCLK (1<<21) +#define S3C24A0_CLKCON_MPEG4 (1<<20) +#define S3C24A0_CLKCON_KEYPAD (1<<19) +#define S3C24A0_CLKCON_ADC (1<<18) +#define S3C24A0_CLKCON_SDI (1<<17) +#define S3C24A0_CLKCON_MS (1<<16) /* memory stick */ +#define S3C24A0_CLKCON_USBD (1<<15) +#define S3C24A0_CLKCON_GPIO (1<<14) +#define S3C24A0_CLKCON_IIS (1<<13) +#define S3C24A0_CLKCON_IIC (1<<12) +#define S3C24A0_CLKCON_SPI (1<<11) +#define S3C24A0_CLKCON_UART1 (1<<10) +#define S3C24A0_CLKCON_UART0 (1<<9) +#define S3C24A0_CLKCON_PWMT (1<<8) +#define S3C24A0_CLKCON_USBH (1<<7) +#define S3C24A0_CLKCON_AC97 (1<<6) +#define S3C24A0_CLKCON_IrDA (1<<4) +#define S3C24A0_CLKCON_IDLE (1<<2) +#define S3C24A0_CLKCON_MON (1<<1) +#define S3C24A0_CLKCON_STOP (1<<0) + +/* CLKSRC register bits */ + +#define S3C24A0_CLKSRC_OSC (1<<8) /* CLKSRC */ +#define S3C24A0_CLKSRC_UPLL (1<<7) +#define S3C24A0_CLKSRC_MPLL (1<<5) +#define S3C24A0_CLKSRC_EXT (1<<4) + +/* Use a single interface with the common code, for s3c24xx */ + +#define S3C2410_MPLLCON S3C24A0_MPLLCON +#define S3C2410_UPLLCON S3C24A0_UPLLCON +#define S3C2410_CLKCON S3C24A0_CLKCON +#define S3C2410_CLKSLOW S3C24A0_CLKSRC +#define S3C2410_CLKDIVN S3C24A0_CLKDIVN + +#define S3C2410_CLKCON_IDLE S3C24A0_CLKCON_IDLE +#define S3C2410_CLKCON_POWER S3C24A0_CLKCON_STOP +#define S3C2410_CLKCON_LCDC S3C24A0_CLKCON_LCDC +#define S3C2410_CLKCON_USBH S3C24A0_CLKCON_USBH +#define S3C2410_CLKCON_USBD S3C24A0_CLKCON_USBD +#define S3C2410_CLKCON_PWMT S3C24A0_CLKCON_PWMT +#define S3C2410_CLKCON_SDI S3C24A0_CLKCON_SDI +#define S3C2410_CLKCON_UART0 S3C24A0_CLKCON_UART0 +#define S3C2410_CLKCON_UART1 S3C24A0_CLKCON_UART1 +#define S3C2410_CLKCON_GPIO S3C24A0_CLKCON_GPIO +#define S3C2410_CLKCON_ADC S3C24A0_CLKCON_ADC +#define S3C2410_CLKCON_IIC S3C24A0_CLKCON_IIC +#define S3C2410_CLKCON_IIS S3C24A0_CLKCON_IIS +#define S3C2410_CLKCON_SPI S3C24A0_CLKCON_SPI + +#define S3C2410_CLKSLOW_UCLK_OFF S3C24A0_CLKSRC_UPLL +#define S3C2410_CLKSLOW_MPLL_OFF S3C24A0_CLKSRC_MPLL +#define S3C2410_CLKSLOW_SLOW (0xFF) +#define S3C2410_CLKSLOW_GET_SLOWVAL(x) (0x1) + +#endif /* __ASM_ARCH_24A0_REGS_CLOCK_H */ diff --git a/arch/arm/mach-s3c24a0/include/mach/regs-irq.h b/arch/arm/mach-s3c24a0/include/mach/regs-irq.h new file mode 100644 index 00000000000..6086f6f189e --- /dev/null +++ b/arch/arm/mach-s3c24a0/include/mach/regs-irq.h @@ -0,0 +1,25 @@ +/* linux/arch/arm/mach-s3c24a0/include/mach/regs-irq.h + * + * Copyright (c) 2003 Simtec Electronics <linux@simtec.co.uk> + * http://www.simtec.co.uk/products/SWLINUX/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + + +#ifndef ___ASM_ARCH_24A0_REGS_IRQ_H +#define ___ASM_ARCH_24A0_REGS_IRQ_H __FILE__ + + +#define S3C2410_EINTMASK S3C2410_EINTREG(0x034) +#define S3C2410_EINTPEND S3C2410_EINTREG(0X038) + +#define S3C24XX_EINTMASK S3C24XX_EINTREG(0x034) +#define S3C24XX_EINTPEND S3C24XX_EINTREG(0X038) + +#endif /* __ASM_ARCH_24A0_REGS_IRQ_H */ + + + diff --git a/arch/arm/mach-s3c24a0/include/mach/system.h b/arch/arm/mach-s3c24a0/include/mach/system.h new file mode 100644 index 00000000000..bd1bd195765 --- /dev/null +++ b/arch/arm/mach-s3c24a0/include/mach/system.h @@ -0,0 +1,25 @@ +/* linux/arch/arm/mach-s3c24a0/include/mach/system.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24A0 - System function defines and includes + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <mach/hardware.h> +#include <asm/io.h> + +#include <mach/map.h> + +static void arch_idle(void) +{ + /* currently no specific idle support. */ +} + +void (*s3c24xx_reset_hook)(void); + +#include <asm/plat-s3c24xx/system-reset.h> diff --git a/arch/arm/mach-s3c24a0/include/mach/tick.h b/arch/arm/mach-s3c24a0/include/mach/tick.h new file mode 100644 index 00000000000..9dea8ba6fb7 --- /dev/null +++ b/arch/arm/mach-s3c24a0/include/mach/tick.h @@ -0,0 +1,15 @@ +/* linux/arch/arm/mach-s3c24a0/include/mach/tick.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C24A0 - timer tick support + */ + +#define SUBSRC_TIMER4 (1 << (IRQ_TIMER4 - IRQ_S3CUART_RX0)) + +static inline int s3c24xx_ostimer_pending(void) +{ + return __raw_readl(S3C2410_SUBSRCPND) & SUBSRC_TIMER4; +} diff --git a/arch/arm/mach-s3c24a0/include/mach/timex.h b/arch/arm/mach-s3c24a0/include/mach/timex.h new file mode 100644 index 00000000000..98573424a01 --- /dev/null +++ b/arch/arm/mach-s3c24a0/include/mach/timex.h @@ -0,0 +1,18 @@ +/* linux/arch/arm/mach-s3c24a0/include/mach/timex.h + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C2410 - time parameters + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_TIMEX_H +#define __ASM_ARCH_TIMEX_H + +#define CLOCK_TICK_RATE 12000000 + +#endif /* __ASM_ARCH_TIMEX_H */ diff --git a/arch/arm/mach-s3c24a0/include/mach/vmalloc.h b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h new file mode 100644 index 00000000000..4d4fe484958 --- /dev/null +++ b/arch/arm/mach-s3c24a0/include/mach/vmalloc.h @@ -0,0 +1,17 @@ +/* linux/include/asm-arm/arch-s3c24ao/vmalloc.h + * + * Copyright 2008 Simtec Electronics <linux@simtec.co.uk> + + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C24A0 vmalloc definition +*/ + +#ifndef __ASM_ARCH_VMALLOC_H +#define __ASM_ARCH_VMALLOC_H + +#define VMALLOC_END (0xE0000000) + +#endif /* __ASM_ARCH_VMALLOC_H */ diff --git a/arch/arm/mach-s3c6400/Kconfig b/arch/arm/mach-s3c6400/Kconfig new file mode 100644 index 00000000000..6da82b5c09b --- /dev/null +++ b/arch/arm/mach-s3c6400/Kconfig @@ -0,0 +1,8 @@ +# arch/arm/mach-s3c6400/Kconfig +# +# Copyright 2008 Openmoko, Inc. +# Simtec Electronics, Ben Dooks <ben@simtec.co.uk> +# +# Licensed under GPLv2 + +# Currently nothing here, this will be added later diff --git a/arch/arm/mach-s3c6400/Makefile b/arch/arm/mach-s3c6400/Makefile new file mode 100644 index 00000000000..8f397db25b8 --- /dev/null +++ b/arch/arm/mach-s3c6400/Makefile @@ -0,0 +1,15 @@ +# arch/arm/mach-s3c6400/Makefile +# +# Copyright 2008 Openmoko, Inc. +# Copyright 2008 Simtec Electronics +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +# Core support for S3C6400 system + +obj-n += blank.o diff --git a/arch/arm/mach-s3c6400/Makefile.boot b/arch/arm/mach-s3c6400/Makefile.boot new file mode 100644 index 00000000000..ba41fdc0a58 --- /dev/null +++ b/arch/arm/mach-s3c6400/Makefile.boot @@ -0,0 +1,2 @@ + zreladdr-y := 0x50008000 +params_phys-y := 0x50000100 diff --git a/arch/arm/mach-s3c6400/include/mach/debug-macro.S b/arch/arm/mach-s3c6400/include/mach/debug-macro.S new file mode 100644 index 00000000000..b18ac5266df --- /dev/null +++ b/arch/arm/mach-s3c6400/include/mach/debug-macro.S @@ -0,0 +1,39 @@ +/* arch/arm/mach-s3c6400/include/mach/debug-macro.S + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* pull in the relevant register and map files. */ + +#include <mach/map.h> +#include <plat/regs-serial.h> + + /* note, for the boot process to work we have to keep the UART + * virtual address aligned to an 1MiB boundary for the L1 + * mapping the head code makes. We keep the UART virtual address + * aligned and add in the offset when we load the value here. + */ + + .macro addruart, rx + mrc p15, 0, \rx, c1, c0 + tst \rx, #1 + ldreq \rx, = S3C_PA_UART + ldrne \rx, = (S3C_VA_UART + S3C_PA_UART & 0xfffff) +#if CONFIG_DEBUG_S3C_UART != 0 + add \rx, \rx, #(0x400 * CONFIG_DEBUG_S3C_UART) +#endif + .endm + +/* include the reset of the code which will do the work, we're only + * compiling for a single cpu processor type so the default of s3c2440 + * will be fine with us. + */ + +#include <plat/debug-macro.S> diff --git a/arch/arm/mach-s3c6400/include/mach/dma.h b/arch/arm/mach-s3c6400/include/mach/dma.h new file mode 100644 index 00000000000..9771ac2cb07 --- /dev/null +++ b/arch/arm/mach-s3c6400/include/mach/dma.h @@ -0,0 +1,16 @@ +/* linux/arch/arm/mach-s3c6400/include/mach/dma.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C6400 - DMA support + */ + +#ifndef __ASM_ARCH_DMA_H +#define __ASM_ARCH_DMA_H __FILE__ + +/* currently nothing here, placeholder */ + +#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/entry-macro.S b/arch/arm/mach-s3c6400/include/mach/entry-macro.S new file mode 100644 index 00000000000..fbd90d2cf35 --- /dev/null +++ b/arch/arm/mach-s3c6400/include/mach/entry-macro.S @@ -0,0 +1,44 @@ +/* arch/arm/mach-s3c6400/include/mach/entry-macro.S + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * Low-level IRQ helper macros for the Samsung S3C64XX series + * + * This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without any + * warranty of any kind, whether express or implied. +*/ + +#include <asm/hardware/vic.h> +#include <mach/map.h> +#include <plat/irqs.h> + + .macro disable_fiq + .endm + + .macro get_irqnr_preamble, base, tmp + ldr \base, =S3C_VA_VIC0 + .endm + + .macro arch_ret_to_user, tmp1, tmp2 + .endm + + .macro get_irqnr_and_base, irqnr, irqstat, base, tmp + + @ check the vic0 + mov \irqnr, # S3C_IRQ_OFFSET + 31 + ldr \irqstat, [ \base, # VIC_IRQ_STATUS ] + teq \irqstat, #0 + + @ otherwise try vic1 + addeq \tmp, \base, #(S3C_VA_VIC1 - S3C_VA_VIC0) + addeq \irqnr, \irqnr, #32 + ldreq \irqstat, [ \tmp, # VIC_IRQ_STATUS ] + teqeq \irqstat, #0 + + clzne \irqstat, \irqstat + subne \irqnr, \irqnr, \irqstat + .endm diff --git a/arch/arm/mach-s3c6400/include/mach/gpio-core.h b/arch/arm/mach-s3c6400/include/mach/gpio-core.h new file mode 100644 index 00000000000..d89aae68b0a --- /dev/null +++ b/arch/arm/mach-s3c6400/include/mach/gpio-core.h @@ -0,0 +1,21 @@ +/* arch/arm/mach-s3c6400/include/mach/gpio-core.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - GPIO core support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_GPIO_CORE_H +#define __ASM_ARCH_GPIO_CORE_H __FILE__ + +/* currently we just include the platform support */ +#include <plat/gpio-core.h> + +#endif /* __ASM_ARCH_GPIO_CORE_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/gpio.h b/arch/arm/mach-s3c6400/include/mach/gpio.h new file mode 100644 index 00000000000..e8e35e8fe73 --- /dev/null +++ b/arch/arm/mach-s3c6400/include/mach/gpio.h @@ -0,0 +1,96 @@ +/* arch/arm/mach-s3c6400/include/mach/gpio.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C6400 - GPIO lib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define gpio_get_value __gpio_get_value +#define gpio_set_value __gpio_set_value +#define gpio_cansleep __gpio_cansleep +#define gpio_to_irq __gpio_to_irq + +/* GPIO bank sizes */ +#define S3C64XX_GPIO_A_NR (8) +#define S3C64XX_GPIO_B_NR (7) +#define S3C64XX_GPIO_C_NR (8) +#define S3C64XX_GPIO_D_NR (5) +#define S3C64XX_GPIO_E_NR (5) +#define S3C64XX_GPIO_F_NR (16) +#define S3C64XX_GPIO_G_NR (7) +#define S3C64XX_GPIO_H_NR (10) +#define S3C64XX_GPIO_I_NR (16) +#define S3C64XX_GPIO_J_NR (12) +#define S3C64XX_GPIO_K_NR (16) +#define S3C64XX_GPIO_L_NR (15) +#define S3C64XX_GPIO_M_NR (6) +#define S3C64XX_GPIO_N_NR (16) +#define S3C64XX_GPIO_O_NR (16) +#define S3C64XX_GPIO_P_NR (15) +#define S3C64XX_GPIO_Q_NR (9) + +/* GPIO bank numbes */ + +/* CONFIG_S3C_GPIO_SPACE allows the user to select extra + * space for debugging purposes so that any accidental + * change from one gpio bank to another can be caught. +*/ + +#define S3C64XX_GPIO_NEXT(__gpio) \ + ((__gpio##_START) + (__gpio##_NR) + CONFIG_S3C_GPIO_SPACE + 1) + +enum s3c_gpio_number { + S3C64XX_GPIO_A_START = 0, + S3C64XX_GPIO_B_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_A), + S3C64XX_GPIO_C_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_B), + S3C64XX_GPIO_D_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_C), + S3C64XX_GPIO_E_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_D), + S3C64XX_GPIO_F_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_E), + S3C64XX_GPIO_G_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_F), + S3C64XX_GPIO_H_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_G), + S3C64XX_GPIO_I_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_H), + S3C64XX_GPIO_J_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_I), + S3C64XX_GPIO_K_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_J), + S3C64XX_GPIO_L_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_K), + S3C64XX_GPIO_M_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_L), + S3C64XX_GPIO_N_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_M), + S3C64XX_GPIO_O_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_N), + S3C64XX_GPIO_P_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_O), + S3C64XX_GPIO_Q_START = S3C64XX_GPIO_NEXT(S3C64XX_GPIO_P), +}; + +/* S3C64XX GPIO number definitions. */ + +#define S3C64XX_GPA(_nr) (S3C64XX_GPIO_A_START + (_nr)) +#define S3C64XX_GPB(_nr) (S3C64XX_GPIO_B_START + (_nr)) +#define S3C64XX_GPC(_nr) (S3C64XX_GPIO_C_START + (_nr)) +#define S3C64XX_GPD(_nr) (S3C64XX_GPIO_D_START + (_nr)) +#define S3C64XX_GPE(_nr) (S3C64XX_GPIO_E_START + (_nr)) +#define S3C64XX_GPF(_nr) (S3C64XX_GPIO_F_START + (_nr)) +#define S3C64XX_GPG(_nr) (S3C64XX_GPIO_G_START + (_nr)) +#define S3C64XX_GPH(_nr) (S3C64XX_GPIO_H_START + (_nr)) +#define S3C64XX_GPI(_nr) (S3C64XX_GPIO_I_START + (_nr)) +#define S3C64XX_GPJ(_nr) (S3C64XX_GPIO_J_START + (_nr)) +#define S3C64XX_GPK(_nr) (S3C64XX_GPIO_K_START + (_nr)) +#define S3C64XX_GPL(_nr) (S3C64XX_GPIO_L_START + (_nr)) +#define S3C64XX_GPM(_nr) (S3C64XX_GPIO_M_START + (_nr)) +#define S3C64XX_GPN(_nr) (S3C64XX_GPIO_N_START + (_nr)) +#define S3C64XX_GPO(_nr) (S3C64XX_GPIO_O_START + (_nr)) +#define S3C64XX_GPP(_nr) (S3C64XX_GPIO_P_START + (_nr)) +#define S3C64XX_GPQ(_nr) (S3C64XX_GPIO_Q_START + (_nr)) + +/* the end of the S3C64XX specific gpios */ +#define S3C64XX_GPIO_END (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1) +#define S3C_GPIO_END S3C64XX_GPIO_END + +/* define the number of gpios we need to the one after the GPQ() range */ +#define ARCH_NR_GPIOS (S3C64XX_GPQ(S3C64XX_GPIO_Q_NR) + 1) + +#include <asm-generic/gpio.h> diff --git a/arch/arm/mach-s3c6400/include/mach/hardware.h b/arch/arm/mach-s3c6400/include/mach/hardware.h new file mode 100644 index 00000000000..862d033e57a --- /dev/null +++ b/arch/arm/mach-s3c6400/include/mach/hardware.h @@ -0,0 +1,16 @@ +/* linux/arch/arm/mach-s3c6400/include/mach/hardware.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C6400 - Hardware support + */ + +#ifndef __ASM_ARCH_HARDWARE_H +#define __ASM_ARCH_HARDWARE_H __FILE__ + +/* currently nothing here, placeholder */ + +#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/irqs.h b/arch/arm/mach-s3c6400/include/mach/irqs.h new file mode 100644 index 00000000000..b38c47cffc2 --- /dev/null +++ b/arch/arm/mach-s3c6400/include/mach/irqs.h @@ -0,0 +1,20 @@ +/* linux/arch/arm/mach-s3c6400/include/mach/irqs.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C6400 - IRQ definitions + */ + +#ifndef __ASM_ARCH_IRQS_H +#define __ASM_ARCH_IRQS_H __FILE__ + +#ifndef __ASM_ARM_IRQ_H +#error "Do not include this directly, instead #include <asm/irq.h>" +#endif + +#include <plat/irqs.h> + +#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h new file mode 100644 index 00000000000..4d5cd7ee8c1 --- /dev/null +++ b/arch/arm/mach-s3c6400/include/mach/map.h @@ -0,0 +1,66 @@ +/* linux/arch/arm/mach-s3c6400/include/mach/map.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C64XX - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MAP_H +#define __ASM_ARCH_MAP_H __FILE__ + +#include <plat/map-base.h> + +/* HSMMC units */ +#define S3C64XX_PA_HSMMC(x) (0x7C200000 + ((x) * 0x100000)) +#define S3C64XX_PA_HSMMC0 S3C64XX_PA_HSMMC(0) +#define S3C64XX_PA_HSMMC1 S3C64XX_PA_HSMMC(1) +#define S3C64XX_PA_HSMMC2 S3C64XX_PA_HSMMC(2) + +#define S3C_PA_UART (0x7F005000) +#define S3C_PA_UART0 (S3C_PA_UART + 0x00) +#define S3C_PA_UART1 (S3C_PA_UART + 0x400) +#define S3C_PA_UART2 (S3C_PA_UART + 0x800) +#define S3C_PA_UART3 (S3C_PA_UART + 0xC00) +#define S3C_UART_OFFSET (0x400) + +/* See notes on UART VA mapping in debug-macro.S */ +#define S3C_VA_UARTx(x) (S3C_VA_UART + (S3C_PA_UART & 0xfffff) + ((x) * S3C_UART_OFFSET)) + +#define S3C_VA_UART0 S3C_VA_UARTx(0) +#define S3C_VA_UART1 S3C_VA_UARTx(1) +#define S3C_VA_UART2 S3C_VA_UARTx(2) +#define S3C_VA_UART3 S3C_VA_UARTx(3) + +#define S3C64XX_PA_SYSCON (0x7E00F000) +#define S3C64XX_PA_TIMER (0x7F006000) +#define S3C64XX_PA_IIC0 (0x7F004000) +#define S3C64XX_PA_IIC1 (0x7F00F000) + +#define S3C64XX_PA_GPIO (0x7F008000) +#define S3C64XX_VA_GPIO S3C_ADDR(0x00500000) +#define S3C64XX_SZ_GPIO SZ_4K + +#define S3C64XX_PA_SDRAM (0x50000000) +#define S3C64XX_PA_VIC0 (0x71200000) +#define S3C64XX_PA_VIC1 (0x71300000) + +/* place VICs close together */ +#define S3C_VA_VIC0 (S3C_VA_IRQ + 0x00) +#define S3C_VA_VIC1 (S3C_VA_IRQ + 0x10000) + +/* compatibiltiy defines. */ +#define S3C_PA_TIMER S3C64XX_PA_TIMER +#define S3C_PA_HSMMC0 S3C64XX_PA_HSMMC0 +#define S3C_PA_HSMMC1 S3C64XX_PA_HSMMC1 +#define S3C_PA_HSMMC2 S3C64XX_PA_HSMMC2 +#define S3C_PA_IIC S3C64XX_PA_IIC0 +#define S3C_PA_IIC1 S3C64XX_PA_IIC1 + +#endif /* __ASM_ARCH_6400_MAP_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/memory.h b/arch/arm/mach-s3c6400/include/mach/memory.h new file mode 100644 index 00000000000..38c381132f2 --- /dev/null +++ b/arch/arm/mach-s3c6400/include/mach/memory.h @@ -0,0 +1,21 @@ +/* arch/arm/mach-s3c6400/include/mach/memory.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_MEMORY_H +#define __ASM_ARCH_MEMORY_H + +#define PHYS_OFFSET UL(0x50000000) + +#define __virt_to_bus(x) __virt_to_phys(x) +#define __bus_to_virt(x) __phys_to_virt(x) + +#endif diff --git a/arch/arm/mach-s3c6400/include/mach/regs-irq.h b/arch/arm/mach-s3c6400/include/mach/regs-irq.h new file mode 100644 index 00000000000..bcce68a0bb7 --- /dev/null +++ b/arch/arm/mach-s3c6400/include/mach/regs-irq.h @@ -0,0 +1,20 @@ +/* linux/arch/arm/mach-s3c6400/include/mach/regs-irq.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C64XX - IRQ register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_REGS_IRQ_H +#define __ASM_ARCH_REGS_IRQ_H __FILE__ + +#include <asm/hardware/vic.h> + +#endif /* __ASM_ARCH_6400_REGS_IRQ_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/system.h b/arch/arm/mach-s3c6400/include/mach/system.h new file mode 100644 index 00000000000..652bbc403f0 --- /dev/null +++ b/arch/arm/mach-s3c6400/include/mach/system.h @@ -0,0 +1,24 @@ +/* linux/arch/arm/mach-s3c6400/include/mach/system.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C6400 - system implementation + */ + +#ifndef __ASM_ARCH_SYSTEM_H +#define __ASM_ARCH_SYSTEM_H __FILE__ + +static void arch_idle(void) +{ + /* nothing here yet */ +} + +static void arch_reset(char mode) +{ + /* nothing here yet */ +} + +#endif /* __ASM_ARCH_IRQ_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/tick.h b/arch/arm/mach-s3c6400/include/mach/tick.h new file mode 100644 index 00000000000..d9c0dc7014e --- /dev/null +++ b/arch/arm/mach-s3c6400/include/mach/tick.h @@ -0,0 +1,29 @@ +/* linux/arch/arm/mach-s3c6400/include/mach/tick.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C64XX - Timer tick support definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_TICK_H +#define __ASM_ARCH_TICK_H __FILE__ + +/* note, the timer interrutps turn up in 2 places, the vic and then + * the timer block. We take the VIC as the base at the moment. + */ +static inline u32 s3c24xx_ostimer_pending(void) +{ + u32 pend = __raw_readl(S3C_VA_VIC0 + VIC_RAW_STATUS); + return pend & 1 << (IRQ_TIMER4_VIC - S3C64XX_IRQ_VIC0(0)); +} + +#define TICK_MAX (0xffffffff) + +#endif /* __ASM_ARCH_6400_TICK_H */ diff --git a/arch/arm/mach-s3c6400/include/mach/uncompress.h b/arch/arm/mach-s3c6400/include/mach/uncompress.h new file mode 100644 index 00000000000..cc822c57cc1 --- /dev/null +++ b/arch/arm/mach-s3c6400/include/mach/uncompress.h @@ -0,0 +1,26 @@ +/* arch/arm/mach-s3c6400/include/mach/uncompress.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C6400 - uncompress code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_UNCOMPRESS_H +#define __ASM_ARCH_UNCOMPRESS_H + +#include <mach/map.h> +#include <plat/uncompress.h> + +static void arch_detect_cpu(void) +{ + /* we do not need to do any cpu detection here at the moment. */ +} + +#endif /* __ASM_ARCH_UNCOMPRESS_H */ diff --git a/arch/arm/mach-s3c6410/Kconfig b/arch/arm/mach-s3c6410/Kconfig new file mode 100644 index 00000000000..d00b5605100 --- /dev/null +++ b/arch/arm/mach-s3c6410/Kconfig @@ -0,0 +1,60 @@ +# arch/arm/mach-s3c6410/Kconfig +# +# Copyright 2008 Openmoko, Inc. +# Copyright 2008 Simtec Electronics +# +# Licensed under GPLv2 + +# Configuration options for the S3C6410 CPU + +config CPU_S3C6410 + bool + select CPU_S3C6400_INIT + select CPU_S3C6400_CLOCK + help + Enable S3C6410 CPU support + +config S3C6410_SETUP_SDHCI + bool + help + Internal helper functions for S3C6410 based SDHCI systems + +config MACH_SMDK6410 + bool "SMDK6410" + select CPU_S3C6410 + select S3C_DEV_HSMMC + select S3C_DEV_HSMMC1 + select S3C_DEV_I2C1 + select S3C6410_SETUP_SDHCI + select S3C64XX_SETUP_I2C1 + help + Machine support for the Samsung SMDK6410 + +# At least some of the SMDK6410s were shipped with the card detect +# for the MMC/SD slots connected to the same input. This means that +# either the boards need to be altered to have channel0 to an alternate +# configuration or that only one slot can be used. + +choice + prompt "SMDK6410 MMC/SD slot setup" + depends on MACH_SMDK6410 + +config SMDK6410_SD_CH0 + bool "Use channel 0 only" + depends on MACH_SMDK6410 + help + Select CON7 (channel 0) as the MMC/SD slot, as + at least some SMDK6410 boards come with the + resistors fitted so that the card detects for + channels 0 and 1 are the same. + +config SMDK6410_SD_CH1 + bool "Use channel 1 only" + depends on MACH_SMDK6410 + help + Select CON6 (channel 1) as the MMC/SD slot, as + at least some SMDK6410 boards come with the + resistors fitted so that the card detects for + channels 0 and 1 are the same. + +endchoice diff --git a/arch/arm/mach-s3c6410/Makefile b/arch/arm/mach-s3c6410/Makefile new file mode 100644 index 00000000000..2cd4f189036 --- /dev/null +++ b/arch/arm/mach-s3c6410/Makefile @@ -0,0 +1,23 @@ +# arch/arm/plat-s3c6410/Makefile +# +# Copyright 2008 Openmoko, Inc. +# Copyright 2008 Simtec Electronics +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := +obj- := + +# Core support for S3C6410 system + +obj-$(CONFIG_CPU_S3C6410) += cpu.o + +# Helper and device support + +obj-$(CONFIG_S3C6410_SETUP_SDHCI) += setup-sdhci.o + +# machine support + +obj-$(CONFIG_MACH_SMDK6410) += mach-smdk6410.o diff --git a/arch/arm/mach-s3c6410/cpu.c b/arch/arm/mach-s3c6410/cpu.c new file mode 100644 index 00000000000..6a73ca6b7a3 --- /dev/null +++ b/arch/arm/mach-s3c6410/cpu.c @@ -0,0 +1,101 @@ +/* linux/arch/arm/mach-s3c6410/cpu.c + * + * Copyright 2008 Simtec Electronics + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/clk.h> +#include <linux/io.h> +#include <linux/sysdev.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <asm/irq.h> + +#include <plat/cpu-freq.h> +#include <plat/regs-serial.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> +#include <plat/sdhci.h> +#include <plat/iic-core.h> +#include <plat/s3c6400.h> +#include <plat/s3c6410.h> + +/* Initial IO mappings */ + +static struct map_desc s3c6410_iodesc[] __initdata = { +}; + +/* s3c6410_map_io + * + * register the standard cpu IO areas +*/ + +void __init s3c6410_map_io(void) +{ + iotable_init(s3c6410_iodesc, ARRAY_SIZE(s3c6410_iodesc)); + + /* initialise device information early */ + s3c6410_default_sdhci0(); + s3c6410_default_sdhci1(); + + /* the i2c devices are directly compatible with s3c2440 */ + s3c_i2c0_setname("s3c2440-i2c"); + s3c_i2c1_setname("s3c2440-i2c"); +} + +void __init s3c6410_init_clocks(int xtal) +{ + printk(KERN_DEBUG "%s: initialising clocks\n", __func__); + s3c24xx_register_baseclocks(xtal); + s3c64xx_register_clocks(); + s3c6400_register_clocks(); + s3c6400_setup_clocks(); +} + +void __init s3c6410_init_irq(void) +{ + /* VIC0 is missing IRQ7, VIC1 is fully populated. */ + s3c64xx_init_irq(~0 & ~(1 << 7), ~0); +} + +struct sysdev_class s3c6410_sysclass = { + .name = "s3c6410-core", +}; + +static struct sys_device s3c6410_sysdev = { + .cls = &s3c6410_sysclass, +}; + +static int __init s3c6410_core_init(void) +{ + return sysdev_class_register(&s3c6410_sysclass); +} + +core_initcall(s3c6410_core_init); + +int __init s3c6410_init(void) +{ + printk("S3C6410: Initialising architecture\n"); + + return sysdev_register(&s3c6410_sysdev); +} diff --git a/arch/arm/mach-s3c6410/mach-smdk6410.c b/arch/arm/mach-s3c6410/mach-smdk6410.c new file mode 100644 index 00000000000..15c24d00a49 --- /dev/null +++ b/arch/arm/mach-s3c6410/mach-smdk6410.c @@ -0,0 +1,114 @@ +/* linux/arch/arm/mach-s3c6410/mach-smdk6410.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/timer.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/io.h> +#include <linux/i2c.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> +#include <asm/mach/irq.h> + +#include <mach/hardware.h> +#include <mach/map.h> + +#include <asm/irq.h> +#include <asm/mach-types.h> + +#include <plat/regs-serial.h> +#include <plat/iic.h> + +#include <plat/s3c6410.h> +#include <plat/clock.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +#define UCON S3C2410_UCON_DEFAULT | S3C2410_UCON_UCLK +#define ULCON S3C2410_LCON_CS8 | S3C2410_LCON_PNONE | S3C2410_LCON_STOPB +#define UFCON S3C2410_UFCON_RXTRIG8 | S3C2410_UFCON_FIFOMODE + +static struct s3c2410_uartcfg smdk6410_uartcfgs[] __initdata = { + [0] = { + .hwport = 0, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, + [1] = { + .hwport = 1, + .flags = 0, + .ucon = 0x3c5, + .ulcon = 0x03, + .ufcon = 0x51, + }, +}; + +struct map_desc smdk6410_iodesc[] = {}; + +static struct platform_device *smdk6410_devices[] __initdata = { +#ifdef CONFIG_SMDK6410_SD_CH0 + &s3c_device_hsmmc0, +#endif +#ifdef CONFIG_SMDK6410_SD_CH1 + &s3c_device_hsmmc1, +#endif + &s3c_device_i2c0, + &s3c_device_i2c1, +}; + +static struct i2c_board_info i2c_devs0[] __initdata = { + { I2C_BOARD_INFO("24c08", 0x50), }, + { I2C_BOARD_INFO("WM8580", 0X1b), }, +}; + +static struct i2c_board_info i2c_devs1[] __initdata = { + { I2C_BOARD_INFO("24c128", 0x57), }, /* Samsung S524AD0XD1 */ +}; + +static void __init smdk6410_map_io(void) +{ + s3c64xx_init_io(smdk6410_iodesc, ARRAY_SIZE(smdk6410_iodesc)); + s3c24xx_init_clocks(12000000); + s3c24xx_init_uarts(smdk6410_uartcfgs, ARRAY_SIZE(smdk6410_uartcfgs)); +} + +static void __init smdk6410_machine_init(void) +{ + s3c_i2c0_set_platdata(NULL); + s3c_i2c1_set_platdata(NULL); + + i2c_register_board_info(0, i2c_devs0, ARRAY_SIZE(i2c_devs0)); + i2c_register_board_info(1, i2c_devs1, ARRAY_SIZE(i2c_devs1)); + + platform_add_devices(smdk6410_devices, ARRAY_SIZE(smdk6410_devices)); +} + +MACHINE_START(SMDK6410, "SMDK6410") + /* Maintainer: Ben Dooks <ben@fluff.org> */ + .phys_io = S3C_PA_UART & 0xfff00000, + .io_pg_offst = (((u32)S3C_VA_UART) >> 18) & 0xfffc, + .boot_params = S3C64XX_PA_SDRAM + 0x100, + + .init_irq = s3c6410_init_irq, + .map_io = smdk6410_map_io, + .init_machine = smdk6410_machine_init, + .timer = &s3c24xx_timer, +MACHINE_END diff --git a/arch/arm/mach-s3c6410/setup-sdhci.c b/arch/arm/mach-s3c6410/setup-sdhci.c new file mode 100644 index 00000000000..0b5788bd598 --- /dev/null +++ b/arch/arm/mach-s3c6410/setup-sdhci.c @@ -0,0 +1,102 @@ +/* linux/arch/arm/mach-s3c6410/setup-sdhci.c + * + * Copyright 2008 Simtec Electronics + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C6410 - Helper functions for settign up SDHCI device(s) (HSMMC) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/platform_device.h> +#include <linux/io.h> + +#include <linux/mmc/card.h> +#include <linux/mmc/host.h> + +#include <mach/gpio.h> +#include <plat/gpio-cfg.h> +#include <plat/regs-sdhci.h> +#include <plat/sdhci.h> + +/* clock sources for the mmc bus clock, order as for the ctrl2[5..4] */ + +char *s3c6410_hsmmc_clksrcs[4] = { + [0] = "hsmmc", + [1] = "hsmmc", + [2] = "mmc_bus", + /* [3] = "48m", - note not succesfully used yet */ +}; + +void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + unsigned int end; + + end = S3C64XX_GPG(2 + width); + + /* Set all the necessary GPG pins to special-function 0 */ + for (gpio = S3C64XX_GPG(0); gpio < end; gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(2)); +} + +void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card) +{ + u32 ctrl2, ctrl3; + + /* don't need to alter anything acording to card-type */ + + writel(S3C64XX_SDHCI_CONTROL4_DRIVE_9mA, r + S3C64XX_SDHCI_CONTROL4); + + ctrl2 = readl(r + S3C_SDHCI_CONTROL2); + ctrl2 &= S3C_SDHCI_CTRL2_SELBASECLK_MASK; + ctrl2 |= (S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR | + S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK | + S3C_SDHCI_CTRL2_ENFBCLKRX | + S3C_SDHCI_CTRL2_DFCNT_NONE | + S3C_SDHCI_CTRL2_ENCLKOUTHOLD); + + if (ios->clock < 25 * 1000000) + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL3 | + S3C_SDHCI_CTRL3_FCSEL2 | + S3C_SDHCI_CTRL3_FCSEL1 | + S3C_SDHCI_CTRL3_FCSEL0); + else + ctrl3 = (S3C_SDHCI_CTRL3_FCSEL1 | S3C_SDHCI_CTRL3_FCSEL0); + + printk(KERN_INFO "%s: CTRL 2=%08x, 3=%08x\n", __func__, ctrl2, ctrl3); + writel(ctrl2, r + S3C_SDHCI_CONTROL2); + writel(ctrl3, r + S3C_SDHCI_CONTROL3); +} + +void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *dev, int width) +{ + unsigned int gpio; + unsigned int end; + + end = S3C64XX_GPH(2 + width); + + /* Set all the necessary GPG pins to special-function 0 */ + for (gpio = S3C64XX_GPH(0); gpio < end; gpio++) { + s3c_gpio_cfgpin(gpio, S3C_GPIO_SFN(2)); + s3c_gpio_setpull(gpio, S3C_GPIO_PULL_NONE); + } + + s3c_gpio_setpull(S3C64XX_GPG(6), S3C_GPIO_PULL_UP); + s3c_gpio_cfgpin(S3C64XX_GPG(6), S3C_GPIO_SFN(3)); +} diff --git a/arch/arm/mm/Kconfig b/arch/arm/mm/Kconfig index ab5f7a21350..355b990a258 100644 --- a/arch/arm/mm/Kconfig +++ b/arch/arm/mm/Kconfig @@ -183,14 +183,14 @@ config CPU_ARM926T depends on ARCH_INTEGRATOR || ARCH_VERSATILE_PB || \ MACH_VERSATILE_AB || ARCH_OMAP730 || \ ARCH_OMAP16XX || MACH_REALVIEW_EB || \ - ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \ + ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_S3C24A0 || \ ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \ ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \ ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \ ARCH_NS9XXX || ARCH_DAVINCI || ARCH_MX2 default y if ARCH_VERSATILE_PB || MACH_VERSATILE_AB || \ ARCH_OMAP730 || ARCH_OMAP16XX || \ - ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || \ + ARCH_PNX4008 || ARCH_NETX || CPU_S3C2412 || ARCH_S3C24A0 || \ ARCH_AT91SAM9260 || ARCH_AT91SAM9261 || \ ARCH_AT91SAM9263 || ARCH_AT91SAM9RL || \ ARCH_AT91SAM9G20 || ARCH_AT91CAP9 || \ @@ -400,9 +400,10 @@ config CPU_FEROCEON_OLD_ID # ARMv6 config CPU_V6 bool "Support ARM V6 processor" - depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 + depends on ARCH_INTEGRATOR || MACH_REALVIEW_EB || ARCH_OMAP2 || ARCH_MX3 || ARCH_MSM || MACH_REALVIEW_PB11MP || MACH_REALVIEW_PB1176 || ARCH_S3C64XX default y if ARCH_MX3 default y if ARCH_MSM + default y if ARCH_S3C64XX select CPU_32v6 select CPU_ABRT_EV6 select CPU_PABRT_NOIFAR diff --git a/arch/arm/plat-s3c/Kconfig b/arch/arm/plat-s3c/Kconfig index 31656c33e05..d7a6e487f21 100644 --- a/arch/arm/plat-s3c/Kconfig +++ b/arch/arm/plat-s3c/Kconfig @@ -6,8 +6,8 @@ config PLAT_S3C bool - depends on ARCH_S3C2410 - default y if ARCH_S3C2410 + depends on ARCH_S3C2410 || ARCH_S3C24A0 || ARCH_S3C64XX + default y select NO_IOPORT help Base platform code for any Samsung S3C device @@ -16,24 +16,24 @@ config PLAT_S3C config CPU_LLSERIAL_S3C2410_ONLY bool - depends on ARCH_S3C2410 + depends on PLAT_S3C default y if CPU_LLSERIAL_S3C2410 && !CPU_LLSERIAL_S3C2440 config CPU_LLSERIAL_S3C2440_ONLY bool - depends on ARCH_S3C2410 + depends on PLAT_S3C default y if CPU_LLSERIAL_S3C2440 && !CPU_LLSERIAL_S3C2410 config CPU_LLSERIAL_S3C2410 bool - depends on ARCH_S3C2410 + depends on PLAT_S3C help Selected if there is an S3C2410 (or register compatible) serial low-level implementation needed config CPU_LLSERIAL_S3C2440 bool - depends on ARCH_S3C2410 + depends on PLAT_S3C help Selected if there is an S3C2440 (or register compatible) serial low-level implementation needed @@ -102,3 +102,67 @@ config S3C_LOWLEVEL_UART_PORT such as the `Uncompressing...` at start time. The value of this configuration should be between zero and two. The port must have been initialised by the boot-loader before use. + +# options for gpiolib support + +config S3C_GPIO_SPACE + int "Space between gpio banks" + default 0 + help + Add a number of spare GPIO entries between each bank for debugging + purposes. This allows any problems where an counter overflows from + one bank to another to be caught, at the expense of using a little + more memory. + +config S3C_GPIO_TRACK + bool + help + Internal configuration option to enable the s3c specific gpio + chip tracking if the platform requires it. + +config S3C_GPIO_PULL_UPDOWN + bool + help + Internal configuration to enable the correct GPIO pull helper + +config S3C_GPIO_PULL_DOWN + bool + help + Internal configuration to enable the correct GPIO pull helper + +config S3C_GPIO_PULL_UP + bool + help + Internal configuration to enable the correct GPIO pull helper + +config S3C_GPIO_CFG_S3C24XX + bool + help + Internal configuration to enable S3C24XX style GPIO configuration + functions. + +config S3C_GPIO_CFG_S3C64XX + bool + help + Internal configuration to enable S3C64XX style GPIO configuration + functions. + +# device definitions to compile in + +config S3C_DEV_HSMMC + bool + depends on PLAT_S3C + help + Compile in platform device definitions for HSMMC code + +config S3C_DEV_HSMMC1 + bool + depends on PLAT_S3C + help + Compile in platform device definitions for HSMMC channel 1 + +config S3C_DEV_I2C1 + bool + depends on PLAT_S3C + help + Compile in platform device definitions for I2C channel 1 diff --git a/arch/arm/plat-s3c/Makefile b/arch/arm/plat-s3c/Makefile index f03d7b35ba3..3fcee0c44e1 100644 --- a/arch/arm/plat-s3c/Makefile +++ b/arch/arm/plat-s3c/Makefile @@ -1,3 +1,26 @@ -# dummy makefile, currently just including asm/arm/plat-s3c/include/plat +# arch/arm/plat-s3c/Makefile +# +# Copyright 2008 Simtec Electronics +# +# Licensed under GPLv2 -obj-n := dummy.o +obj-y := +obj-m := +obj-n := +obj- := + +# Core support for all Samsung SoCs + +obj-y += init.o +obj-y += time.o +obj-y += clock.o +obj-y += pwm-clock.o +obj-y += gpio.o +obj-y += gpio-config.o + +# devices + +obj-$(CONFIG_S3C_DEV_HSMMC) += dev-hsmmc.o +obj-$(CONFIG_S3C_DEV_HSMMC1) += dev-hsmmc1.o +obj-y += dev-i2c0.o +obj-$(CONFIG_S3C_DEV_I2C1) += dev-i2c1.o diff --git a/arch/arm/plat-s3c/clock.c b/arch/arm/plat-s3c/clock.c new file mode 100644 index 00000000000..1054d18828f --- /dev/null +++ b/arch/arm/plat-s3c/clock.c @@ -0,0 +1,369 @@ +/* linux/arch/arm/plat-s3c24xx/clock.c + * + * Copyright (c) 2004-2005 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX Core clock control support + * + * Based on, and code from linux/arch/arm/mach-versatile/clock.c + ** + ** Copyright (C) 2004 ARM Limited. + ** Written by Deep Blue Solutions Limited. + * + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/platform_device.h> +#include <linux/sysdev.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/clk.h> +#include <linux/spinlock.h> +#include <linux/delay.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <asm/irq.h> + +#include <plat/cpu-freq.h> + +#include <plat/clock.h> +#include <plat/cpu.h> + +/* clock information */ + +static LIST_HEAD(clocks); + +/* We originally used an mutex here, but some contexts (see resume) + * are calling functions such as clk_set_parent() with IRQs disabled + * causing an BUG to be triggered. + */ +DEFINE_SPINLOCK(clocks_lock); + +/* enable and disable calls for use with the clk struct */ + +static int clk_null_enable(struct clk *clk, int enable) +{ + return 0; +} + +/* Clock API calls */ + +struct clk *clk_get(struct device *dev, const char *id) +{ + struct clk *p; + struct clk *clk = ERR_PTR(-ENOENT); + int idno; + + if (dev == NULL || dev->bus != &platform_bus_type) + idno = -1; + else + idno = to_platform_device(dev)->id; + + spin_lock(&clocks_lock); + + list_for_each_entry(p, &clocks, list) { + if (p->id == idno && + strcmp(id, p->name) == 0 && + try_module_get(p->owner)) { + clk = p; + break; + } + } + + /* check for the case where a device was supplied, but the + * clock that was being searched for is not device specific */ + + if (IS_ERR(clk)) { + list_for_each_entry(p, &clocks, list) { + if (p->id == -1 && strcmp(id, p->name) == 0 && + try_module_get(p->owner)) { + clk = p; + break; + } + } + } + + spin_unlock(&clocks_lock); + return clk; +} + +void clk_put(struct clk *clk) +{ + module_put(clk->owner); +} + +int clk_enable(struct clk *clk) +{ + if (IS_ERR(clk) || clk == NULL) + return -EINVAL; + + clk_enable(clk->parent); + + spin_lock(&clocks_lock); + + if ((clk->usage++) == 0) + (clk->enable)(clk, 1); + + spin_unlock(&clocks_lock); + return 0; +} + +void clk_disable(struct clk *clk) +{ + if (IS_ERR(clk) || clk == NULL) + return; + + spin_lock(&clocks_lock); + + if ((--clk->usage) == 0) + (clk->enable)(clk, 0); + + spin_unlock(&clocks_lock); + clk_disable(clk->parent); +} + + +unsigned long clk_get_rate(struct clk *clk) +{ + if (IS_ERR(clk)) + return 0; + + if (clk->rate != 0) + return clk->rate; + + if (clk->get_rate != NULL) + return (clk->get_rate)(clk); + + if (clk->parent != NULL) + return clk_get_rate(clk->parent); + + return clk->rate; +} + +long clk_round_rate(struct clk *clk, unsigned long rate) +{ + if (!IS_ERR(clk) && clk->round_rate) + return (clk->round_rate)(clk, rate); + + return rate; +} + +int clk_set_rate(struct clk *clk, unsigned long rate) +{ + int ret; + + if (IS_ERR(clk)) + return -EINVAL; + + /* We do not default just do a clk->rate = rate as + * the clock may have been made this way by choice. + */ + + WARN_ON(clk->set_rate == NULL); + + if (clk->set_rate == NULL) + return -EINVAL; + + spin_lock(&clocks_lock); + ret = (clk->set_rate)(clk, rate); + spin_unlock(&clocks_lock); + + return ret; +} + +struct clk *clk_get_parent(struct clk *clk) +{ + return clk->parent; +} + +int clk_set_parent(struct clk *clk, struct clk *parent) +{ + int ret = 0; + + if (IS_ERR(clk)) + return -EINVAL; + + spin_lock(&clocks_lock); + + if (clk->set_parent) + ret = (clk->set_parent)(clk, parent); + + spin_unlock(&clocks_lock); + + return ret; +} + +EXPORT_SYMBOL(clk_get); +EXPORT_SYMBOL(clk_put); +EXPORT_SYMBOL(clk_enable); +EXPORT_SYMBOL(clk_disable); +EXPORT_SYMBOL(clk_get_rate); +EXPORT_SYMBOL(clk_round_rate); +EXPORT_SYMBOL(clk_set_rate); +EXPORT_SYMBOL(clk_get_parent); +EXPORT_SYMBOL(clk_set_parent); + +/* base clocks */ + +static int clk_default_setrate(struct clk *clk, unsigned long rate) +{ + clk->rate = rate; + return 0; +} + +struct clk clk_xtal = { + .name = "xtal", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, +}; + +struct clk clk_ext = { + .name = "ext", + .id = -1, +}; + +struct clk clk_epll = { + .name = "epll", + .id = -1, +}; + +struct clk clk_mpll = { + .name = "mpll", + .id = -1, + .set_rate = clk_default_setrate, +}; + +struct clk clk_upll = { + .name = "upll", + .id = -1, + .parent = NULL, + .ctrlbit = 0, +}; + +struct clk clk_f = { + .name = "fclk", + .id = -1, + .rate = 0, + .parent = &clk_mpll, + .ctrlbit = 0, + .set_rate = clk_default_setrate, +}; + +struct clk clk_h = { + .name = "hclk", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, + .set_rate = clk_default_setrate, +}; + +struct clk clk_p = { + .name = "pclk", + .id = -1, + .rate = 0, + .parent = NULL, + .ctrlbit = 0, + .set_rate = clk_default_setrate, +}; + +struct clk clk_usb_bus = { + .name = "usb-bus", + .id = -1, + .rate = 0, + .parent = &clk_upll, +}; + + + +struct clk s3c24xx_uclk = { + .name = "uclk", + .id = -1, +}; + +/* initialise the clock system */ + +int s3c24xx_register_clock(struct clk *clk) +{ + clk->owner = THIS_MODULE; + + if (clk->enable == NULL) + clk->enable = clk_null_enable; + + /* add to the list of available clocks */ + + /* Quick check to see if this clock has already been registered. */ + BUG_ON(clk->list.prev != clk->list.next); + + spin_lock(&clocks_lock); + list_add(&clk->list, &clocks); + spin_unlock(&clocks_lock); + + return 0; +} + +int s3c24xx_register_clocks(struct clk **clks, int nr_clks) +{ + int fails = 0; + + for (; nr_clks > 0; nr_clks--, clks++) { + if (s3c24xx_register_clock(*clks) < 0) + fails++; + } + + return fails; +} + +/* initalise all the clocks */ + +int __init s3c24xx_register_baseclocks(unsigned long xtal) +{ + printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n"); + + clk_xtal.rate = xtal; + + /* register our clocks */ + + if (s3c24xx_register_clock(&clk_xtal) < 0) + printk(KERN_ERR "failed to register master xtal\n"); + + if (s3c24xx_register_clock(&clk_mpll) < 0) + printk(KERN_ERR "failed to register mpll clock\n"); + + if (s3c24xx_register_clock(&clk_upll) < 0) + printk(KERN_ERR "failed to register upll clock\n"); + + if (s3c24xx_register_clock(&clk_f) < 0) + printk(KERN_ERR "failed to register cpu fclk\n"); + + if (s3c24xx_register_clock(&clk_h) < 0) + printk(KERN_ERR "failed to register cpu hclk\n"); + + if (s3c24xx_register_clock(&clk_p) < 0) + printk(KERN_ERR "failed to register cpu pclk\n"); + + return 0; +} + diff --git a/arch/arm/plat-s3c/dev-hsmmc.c b/arch/arm/plat-s3c/dev-hsmmc.c new file mode 100644 index 00000000000..4c05b39810e --- /dev/null +++ b/arch/arm/plat-s3c/dev-hsmmc.c @@ -0,0 +1,68 @@ +/* linux/arch/arm/plat-s3c/dev-hsmmc.c + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series device definition for hsmmc devices + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mmc/host.h> + +#include <mach/map.h> +#include <plat/sdhci.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +#define S3C_SZ_HSMMC (0x1000) + +static struct resource s3c_hsmmc_resource[] = { + [0] = { + .start = S3C_PA_HSMMC0, + .end = S3C_PA_HSMMC0 + S3C_SZ_HSMMC - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_HSMMC0, + .end = IRQ_HSMMC0, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 s3c_device_hsmmc_dmamask = 0xffffffffUL; + +struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata = { + .max_width = 4, + .host_caps = (MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), +}; + +struct platform_device s3c_device_hsmmc0 = { + .name = "s3c-sdhci", + .id = 0, + .num_resources = ARRAY_SIZE(s3c_hsmmc_resource), + .resource = s3c_hsmmc_resource, + .dev = { + .dma_mask = &s3c_device_hsmmc_dmamask, + .coherent_dma_mask = 0xffffffffUL, + .platform_data = &s3c_hsmmc0_def_platdata, + }, +}; + +void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd) +{ + struct s3c_sdhci_platdata *set = &s3c_hsmmc0_def_platdata; + + set->max_width = pd->max_width; + + if (pd->cfg_gpio) + set->cfg_gpio = pd->cfg_gpio; + if (pd->cfg_card) + set->cfg_card = pd->cfg_card; +} diff --git a/arch/arm/plat-s3c/dev-hsmmc1.c b/arch/arm/plat-s3c/dev-hsmmc1.c new file mode 100644 index 00000000000..e49bc4cd0ee --- /dev/null +++ b/arch/arm/plat-s3c/dev-hsmmc1.c @@ -0,0 +1,68 @@ +/* linux/arch/arm/plat-s3c/dev-hsmmc1.c + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series device definition for hsmmc device 1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/platform_device.h> +#include <linux/mmc/host.h> + +#include <mach/map.h> +#include <plat/sdhci.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +#define S3C_SZ_HSMMC (0x1000) + +static struct resource s3c_hsmmc1_resource[] = { + [0] = { + .start = S3C_PA_HSMMC1, + .end = S3C_PA_HSMMC1 + S3C_SZ_HSMMC - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_HSMMC1, + .end = IRQ_HSMMC1, + .flags = IORESOURCE_IRQ, + } +}; + +static u64 s3c_device_hsmmc1_dmamask = 0xffffffffUL; + +struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata = { + .max_width = 4, + .host_caps = (MMC_CAP_4_BIT_DATA | + MMC_CAP_MMC_HIGHSPEED | MMC_CAP_SD_HIGHSPEED), +}; + +struct platform_device s3c_device_hsmmc1 = { + .name = "s3c-sdhci", + .id = 1, + .num_resources = ARRAY_SIZE(s3c_hsmmc1_resource), + .resource = s3c_hsmmc1_resource, + .dev = { + .dma_mask = &s3c_device_hsmmc1_dmamask, + .coherent_dma_mask = 0xffffffffUL, + .platform_data = &s3c_hsmmc1_def_platdata, + }, +}; + +void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd) +{ + struct s3c_sdhci_platdata *set = &s3c_hsmmc1_def_platdata; + + set->max_width = pd->max_width; + + if (pd->cfg_gpio) + set->cfg_gpio = pd->cfg_gpio; + if (pd->cfg_card) + set->cfg_card = pd->cfg_card; +} diff --git a/arch/arm/plat-s3c/dev-i2c0.c b/arch/arm/plat-s3c/dev-i2c0.c new file mode 100644 index 00000000000..2c0128c77c6 --- /dev/null +++ b/arch/arm/plat-s3c/dev-i2c0.c @@ -0,0 +1,71 @@ +/* linux/arch/arm/plat-s3c/dev-i2c0.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series device definition for i2c device 0 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/map.h> + +#include <plat/regs-iic.h> +#include <plat/iic.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s3c_i2c_resource[] = { + [0] = { + .start = S3C_PA_IIC, + .end = S3C_PA_IIC + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IIC, + .end = IRQ_IIC, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_i2c0 = { + .name = "s3c2410-i2c", +#ifdef CONFIG_S3C_DEV_I2C1 + .id = 0, +#else + .id = -1, +#endif + .num_resources = ARRAY_SIZE(s3c_i2c_resource), + .resource = s3c_i2c_resource, +}; + +static struct s3c2410_platform_i2c default_i2c_data0 __initdata = { + .flags = 0, + .slave_addr = 0x10, + .bus_freq = 100*1000, + .max_freq = 400*1000, + .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON, +}; + +void __init s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) + pd = &default_i2c_data0; + + npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + else if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c0_cfg_gpio; + + s3c_device_i2c0.dev.platform_data = npd; +} diff --git a/arch/arm/plat-s3c/dev-i2c1.c b/arch/arm/plat-s3c/dev-i2c1.c new file mode 100644 index 00000000000..9658fb0aec9 --- /dev/null +++ b/arch/arm/plat-s3c/dev-i2c1.c @@ -0,0 +1,68 @@ +/* linux/arch/arm/plat-s3c/dev-i2c1.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series device definition for i2c device 1 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/string.h> +#include <linux/platform_device.h> + +#include <mach/map.h> + +#include <plat/regs-iic.h> +#include <plat/iic.h> +#include <plat/devs.h> +#include <plat/cpu.h> + +static struct resource s3c_i2c_resource[] = { + [0] = { + .start = S3C_PA_IIC1, + .end = S3C_PA_IIC1 + SZ_4K - 1, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_IIC1, + .end = IRQ_IIC1, + .flags = IORESOURCE_IRQ, + }, +}; + +struct platform_device s3c_device_i2c1 = { + .name = "s3c2410-i2c", + .id = 1, + .num_resources = ARRAY_SIZE(s3c_i2c_resource), + .resource = s3c_i2c_resource, +}; + +static struct s3c2410_platform_i2c default_i2c_data1 __initdata = { + .flags = 0, + .bus_num = 1, + .slave_addr = 0x10, + .bus_freq = 100*1000, + .max_freq = 400*1000, + .sda_delay = S3C2410_IICLC_SDA_DELAY5 | S3C2410_IICLC_FILTER_ON, +}; + +void __init s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *pd) +{ + struct s3c2410_platform_i2c *npd; + + if (!pd) + pd = &default_i2c_data1; + + npd = kmemdup(pd, sizeof(struct s3c2410_platform_i2c), GFP_KERNEL); + if (!npd) + printk(KERN_ERR "%s: no memory for platform data\n", __func__); + else if (!npd->cfg_gpio) + npd->cfg_gpio = s3c_i2c1_cfg_gpio; + + s3c_device_i2c1.dev.platform_data = npd; +} diff --git a/arch/arm/plat-s3c/gpio-config.c b/arch/arm/plat-s3c/gpio-config.c new file mode 100644 index 00000000000..7642b975a99 --- /dev/null +++ b/arch/arm/plat-s3c/gpio-config.c @@ -0,0 +1,163 @@ +/* linux/arch/arm/plat-s3c/gpio-config.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series GPIO configuration core + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/gpio.h> +#include <linux/io.h> + +#include <mach/gpio-core.h> +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> + +int s3c_gpio_cfgpin(unsigned int pin, unsigned int config) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned long flags; + int offset; + int ret; + + if (!chip) + return -EINVAL; + + offset = pin - chip->chip.base; + + local_irq_save(flags); + ret = s3c_gpio_do_setcfg(chip, offset, config); + local_irq_restore(flags); + + return ret; +} + +int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull) +{ + struct s3c_gpio_chip *chip = s3c_gpiolib_getchip(pin); + unsigned long flags; + int offset, ret; + + if (!chip) + return -EINVAL; + + offset = pin - chip->chip.base; + + local_irq_save(flags); + ret = s3c_gpio_do_setpull(chip, offset, pull); + local_irq_restore(flags); + + return ret; +} + +#ifdef CONFIG_S3C_GPIO_CFG_S3C24XX +int s3c_gpio_setcfg_s3c24xx_banka(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = off; + u32 con; + + if (s3c_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + + /* Map output to 0, and SFN2 to 1 */ + cfg -= 1; + if (cfg > 1) + return -EINVAL; + + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0x1 << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} + +int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = off * 2; + u32 con; + + if (s3c_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + if (cfg > 3) + return -EINVAL; + + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0x3 << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} +#endif + +#ifdef CONFIG_S3C_GPIO_CFG_S3C64XX +int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg) +{ + void __iomem *reg = chip->base; + unsigned int shift = (off & 7) * 4; + u32 con; + + if (off < 8 && chip->chip.ngpio >= 8) + reg -= 4; + + if (s3c_gpio_is_cfg_special(cfg)) { + cfg &= 0xf; + cfg <<= shift; + } + + con = __raw_readl(reg); + con &= ~(0xf << shift); + con |= cfg; + __raw_writel(con, reg); + + return 0; +} +#endif /* CONFIG_S3C_GPIO_CFG_S3C64XX */ + +#ifdef CONFIG_S3C_GPIO_PULL_UPDOWN +int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + void __iomem *reg = chip->base + 0x08; + int shift = off * 2; + u32 pup; + + pup = __raw_readl(reg); + pup &= ~(3 << shift); + pup |= pull << shift; + __raw_writel(pup, reg); + + return 0; +} + +s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, + unsigned int off) +{ + void __iomem *reg = chip->base + 0x08; + int shift = off * 2; + u32 pup = __raw_readl(reg); + + pup >>= shift; + pup &= 0x3; + return (__force s3c_gpio_pull_t)pup; +} +#endif diff --git a/arch/arm/plat-s3c/gpio.c b/arch/arm/plat-s3c/gpio.c new file mode 100644 index 00000000000..d71dd6d9ce5 --- /dev/null +++ b/arch/arm/plat-s3c/gpio.c @@ -0,0 +1,147 @@ +/* linux/arch/arm/plat-s3c/gpio.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series GPIO core + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/init.h> +#include <linux/io.h> +#include <linux/gpio.h> + +#include <plat/gpio-core.h> + +#ifdef CONFIG_S3C_GPIO_TRACK +struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; + +static __init void s3c_gpiolib_track(struct s3c_gpio_chip *chip) +{ + unsigned int gpn; + int i; + + gpn = chip->chip.base; + for (i = 0; i < chip->chip.ngpio; i++, gpn++) { + BUG_ON(gpn > ARRAY_SIZE(s3c_gpios)); + s3c_gpios[gpn] = chip; + } +} +#endif /* CONFIG_S3C_GPIO_TRACK */ + +/* Default routines for controlling GPIO, based on the original S3C24XX + * GPIO functions which deal with the case where each gpio bank of the + * chip is as following: + * + * base + 0x00: Control register, 2 bits per gpio + * gpio n: 2 bits starting at (2*n) + * 00 = input, 01 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n +*/ + +static int s3c_gpiolib_input(struct gpio_chip *chip, unsigned offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long con; + + local_irq_save(flags); + + con = __raw_readl(base + 0x00); + con &= ~(3 << (offset * 2)); + + __raw_writel(con, base + 0x00); + + local_irq_restore(flags); + return 0; +} + +static int s3c_gpiolib_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long dat; + unsigned long con; + + local_irq_save(flags); + + dat = __raw_readl(base + 0x04); + dat &= ~(1 << offset); + if (value) + dat |= 1 << offset; + __raw_writel(dat, base + 0x04); + + con = __raw_readl(base + 0x00); + con &= ~(3 << (offset * 2)); + con |= 1 << (offset * 2); + + __raw_writel(con, base + 0x00); + __raw_writel(dat, base + 0x04); + + local_irq_restore(flags); + return 0; +} + +static void s3c_gpiolib_set(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long flags; + unsigned long dat; + + local_irq_save(flags); + + dat = __raw_readl(base + 0x04); + dat &= ~(1 << offset); + if (value) + dat |= 1 << offset; + __raw_writel(dat, base + 0x04); + + local_irq_restore(flags); +} + +static int s3c_gpiolib_get(struct gpio_chip *chip, unsigned offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + unsigned long val; + + val = __raw_readl(ourchip->base + 0x04); + val >>= offset; + val &= 1; + + return val; +} + +__init void s3c_gpiolib_add(struct s3c_gpio_chip *chip) +{ + struct gpio_chip *gc = &chip->chip; + int ret; + + BUG_ON(!chip->base); + BUG_ON(!gc->label); + BUG_ON(!gc->ngpio); + + if (!gc->direction_input) + gc->direction_input = s3c_gpiolib_input; + if (!gc->direction_output) + gc->direction_output = s3c_gpiolib_output; + if (!gc->set) + gc->set = s3c_gpiolib_set; + if (!gc->get) + gc->get = s3c_gpiolib_get; + + /* gpiochip_add() prints own failure message on error. */ + ret = gpiochip_add(gc); + if (ret >= 0) + s3c_gpiolib_track(chip); +} diff --git a/arch/arm/plat-s3c/include/mach/io.h b/arch/arm/plat-s3c/include/mach/io.h new file mode 100644 index 00000000000..10d28d66ace --- /dev/null +++ b/arch/arm/plat-s3c/include/mach/io.h @@ -0,0 +1,18 @@ +/* arch/arm/plat-s3c/include/mach/io.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben-linux@fluff.org> + * + * Default IO routines for plat-s3c based systems, such as S3C24A0 + */ + +#ifndef __ASM_ARM_ARCH_IO_H +#define __ASM_ARM_ARCH_IO_H + +/* No current ISA/PCI bus support. */ +#define __io(a) ((void __iomem *)(a)) +#define __mem_pci(a) (a) + +#define IO_SPACE_LIMIT (0xFFFFFFFF) + +#endif diff --git a/arch/arm/mach-s3c2410/include/mach/timex.h b/arch/arm/plat-s3c/include/mach/timex.h index 2a425ed0a7e..2a425ed0a7e 100644 --- a/arch/arm/mach-s3c2410/include/mach/timex.h +++ b/arch/arm/plat-s3c/include/mach/timex.h diff --git a/arch/arm/mach-s3c2410/include/mach/vmalloc.h b/arch/arm/plat-s3c/include/mach/vmalloc.h index 315b0078a34..bfd2ca6e307 100644 --- a/arch/arm/mach-s3c2410/include/mach/vmalloc.h +++ b/arch/arm/plat-s3c/include/mach/vmalloc.h @@ -1,4 +1,4 @@ -/* arch/arm/mach-s3c2410/include/mach/vmalloc.h +/* arch/arm/plat-s3c/include/mach/vmalloc.h * * from arch/arm/mach-iop3xx/include/mach/vmalloc.h * diff --git a/arch/arm/plat-s3c24xx/include/plat/clock.h b/arch/arm/plat-s3c/include/plat/clock.h index 235b753cd87..ea1f3ffa971 100644 --- a/arch/arm/plat-s3c24xx/include/plat/clock.h +++ b/arch/arm/plat-s3c/include/plat/clock.h @@ -1,5 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/clock.h - * linux/arch/arm/mach-s3c2410/clock.h +/* linux/arch/arm/plat-s3c/include/plat/clock.h * * Copyright (c) 2004-2005 Simtec Electronics * http://www.simtec.co.uk/products/SWLINUX/ @@ -10,6 +9,8 @@ * published by the Free Software Foundation. */ +#include <linux/spinlock.h> + struct clk { struct list_head list; struct module *owner; @@ -44,21 +45,39 @@ extern struct clk clk_h; extern struct clk clk_p; extern struct clk clk_mpll; extern struct clk clk_upll; +extern struct clk clk_epll; extern struct clk clk_xtal; +extern struct clk clk_ext; + +/* S3C64XX specific clocks */ +extern struct clk clk_27m; +extern struct clk clk_48m; /* exports for arch/arm/mach-s3c2410 * * Please DO NOT use these outside of arch/arm/mach-s3c2410 */ -extern struct mutex clocks_mutex; +extern spinlock_t clocks_lock; extern int s3c2410_clkcon_enable(struct clk *clk, int enable); extern int s3c24xx_register_clock(struct clk *clk); extern int s3c24xx_register_clocks(struct clk **clk, int nr_clks); -extern int s3c24xx_setup_clocks(unsigned long xtal, - unsigned long fclk, - unsigned long hclk, - unsigned long pclk); +extern int s3c24xx_register_baseclocks(unsigned long xtal); + +extern void s3c64xx_register_clocks(void); + +extern void s3c24xx_setup_clocks(unsigned long fclk, + unsigned long hclk, + unsigned long pclk); + +extern void s3c2410_setup_clocks(void); +extern void s3c2412_setup_clocks(void); +extern void s3c244x_setup_clocks(void); +extern void s3c2443_setup_clocks(void); + +/* S3C64XX specific functions and clocks */ + +extern int s3c64xx_sclk_ctrl(struct clk *clk, int enable); diff --git a/arch/arm/plat-s3c/include/plat/cpu-freq.h b/arch/arm/plat-s3c/include/plat/cpu-freq.h new file mode 100644 index 00000000000..c86a13307e9 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/cpu-freq.h @@ -0,0 +1,94 @@ +/* arch/arm/plat-s3c/include/plat/cpu-freq.h + * + * Copyright (c) 2006,2007 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C CPU frequency scaling support - driver and board + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/cpufreq.h> + +struct s3c_cpufreq_info; +struct s3c_cpufreq_board; +struct s3c_iotimings; + +struct s3c_freq { + unsigned long fclk; + unsigned long armclk; + unsigned long hclk_tns; /* in 10ths of ns */ + unsigned long hclk; + unsigned long pclk; +}; + +/* wrapper 'struct cpufreq_freqs' so that any drivers receiving the + * notification can use this information that is not provided by just + * having the core frequency alone. + */ + +struct s3c_cpufreq_freqs { + struct cpufreq_freqs freqs; + struct s3c_freq old; + struct s3c_freq new; +}; + +#define to_s3c_cpufreq(_cf) container_of(_cf, struct s3c_cpufreq_freqs, freqs) + +struct s3c_clkdivs { + int p_divisor; /* fclk / pclk */ + int h_divisor; /* fclk / hclk */ + int arm_divisor; /* not all cpus have this. */ + unsigned char dvs; /* using dvs mode to arm. */ +}; + +#define PLLVAL(_m, _p, _s) (((_m) << 12) | ((_p) << 4) | (_s)) + +struct s3c_pllval { + unsigned long freq; + unsigned long pll_reg; +}; + +struct s3c_cpufreq_config { + struct s3c_freq freq; + struct s3c_pllval pll; + struct s3c_clkdivs divs; + struct s3c_cpufreq_info *info; /* for core, not drivers */ + struct s3c_cpufreq_board *board; +}; + +/* s3c_cpufreq_board + * + * per-board configuraton information, such as memory refresh and + * how to initialise IO timings. + */ +struct s3c_cpufreq_board { + unsigned int refresh; /* refresh period in ns */ + unsigned int auto_io:1; /* automatically init io timings. */ + unsigned int need_io:1; /* set if needs io timing support. */ + + /* any non-zero field in here is taken as an upper limit. */ + struct s3c_freq max; /* frequency limits */ +}; + +/* Things depending on frequency scaling. */ +#ifdef CONFIG_CPU_FREQ_S3C +#define __init_or_cpufreq +#else +#define __init_or_cpufreq __init +#endif + +/* Board functions */ + +#ifdef CONFIG_CPU_FREQ_S3C +extern int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board); +#else + +static inline int s3c_cpufreq_setboard(struct s3c_cpufreq_board *board) +{ + return 0; +} +#endif /* CONFIG_CPU_FREQ_S3C */ diff --git a/arch/arm/plat-s3c24xx/include/plat/cpu.h b/arch/arm/plat-s3c/include/plat/cpu.h index 23e420e8bd5..e62ae0fcfe5 100644 --- a/arch/arm/plat-s3c24xx/include/plat/cpu.h +++ b/arch/arm/plat-s3c/include/plat/cpu.h @@ -1,4 +1,4 @@ -/* linux/include/asm-arm/plat-s3c24xx/cpu.h +/* linux/arch/arm/plat-s3c/include/plat/cpu.h * * Copyright (c) 2004-2005 Simtec Electronics * Ben Dooks <ben@simtec.co.uk> @@ -18,7 +18,7 @@ #define MHZ (1000*1000) #endif -#define print_mhz(m) ((m) / MHZ), ((m / 1000) % 1000) +#define print_mhz(m) ((m) / MHZ), (((m) / 1000) % 1000) /* forward declaration */ struct s3c24xx_uart_resources; @@ -26,11 +26,28 @@ struct platform_device; struct s3c2410_uartcfg; struct map_desc; +/* per-cpu initialisation function table. */ + +struct cpu_table { + unsigned long idcode; + unsigned long idmask; + void (*map_io)(void); + void (*init_uarts)(struct s3c2410_uartcfg *cfg, int no); + void (*init_clocks)(int xtal); + int (*init)(void); + const char *name; +}; + +extern void s3c_init_cpu(unsigned long idcode, + struct cpu_table *cpus, unsigned int cputab_size); + /* core initialisation functions */ extern void s3c24xx_init_irq(void); +extern void s3c64xx_init_irq(u32 vic0, u32 vic1); extern void s3c24xx_init_io(struct map_desc *mach_desc, int size); +extern void s3c64xx_init_io(struct map_desc *mach_desc, int size); extern void s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no); diff --git a/arch/arm/plat-s3c/include/plat/debug-macro.S b/arch/arm/plat-s3c/include/plat/debug-macro.S index 4aa7e2e6c00..3634d4e3708 100644 --- a/arch/arm/plat-s3c/include/plat/debug-macro.S +++ b/arch/arm/plat-s3c/include/plat/debug-macro.S @@ -20,7 +20,7 @@ .endm #ifndef fifo_level -#define fifo_level fifo_level_s3c2410 +#define fifo_level fifo_level_s3c2440 #endif .macro fifo_full_s3c2440 rd, rx diff --git a/arch/arm/plat-s3c24xx/include/plat/devs.h b/arch/arm/plat-s3c/include/plat/devs.h index badaac9d64a..0e342d1fafb 100644 --- a/arch/arm/plat-s3c24xx/include/plat/devs.h +++ b/arch/arm/plat-s3c/include/plat/devs.h @@ -17,6 +17,7 @@ struct s3c24xx_uart_resources { }; extern struct s3c24xx_uart_resources s3c2410_uart_resources[]; +extern struct s3c24xx_uart_resources s3c64xx_uart_resources[]; extern struct platform_device *s3c24xx_uart_devs[]; extern struct platform_device *s3c24xx_uart_src[]; @@ -26,12 +27,15 @@ extern struct platform_device s3c_device_timer[]; extern struct platform_device s3c_device_usb; extern struct platform_device s3c_device_lcd; extern struct platform_device s3c_device_wdt; -extern struct platform_device s3c_device_i2c; +extern struct platform_device s3c_device_i2c0; +extern struct platform_device s3c_device_i2c1; extern struct platform_device s3c_device_iis; extern struct platform_device s3c_device_rtc; extern struct platform_device s3c_device_adc; extern struct platform_device s3c_device_sdi; -extern struct platform_device s3c_device_hsmmc; +extern struct platform_device s3c_device_hsmmc0; +extern struct platform_device s3c_device_hsmmc1; +extern struct platform_device s3c_device_hsmmc2; extern struct platform_device s3c_device_spi0; extern struct platform_device s3c_device_spi1; diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h new file mode 100644 index 00000000000..652e2bbdaa2 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/gpio-cfg-helpers.h @@ -0,0 +1,176 @@ +/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg-helper.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - GPIO pin configuration helper definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* This is meant for core cpu support, machine or other driver files + * should not be including this header. + */ + +#ifndef __PLAT_GPIO_CFG_HELPERS_H +#define __PLAT_GPIO_CFG_HELPERS_H __FILE__ + +/* As a note, all gpio configuration functions are entered exclusively, either + * with the relevant lock held or the system prevented from doing anything else + * by disabling interrupts. +*/ + +static inline int s3c_gpio_do_setcfg(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int config) +{ + return (chip->config->set_config)(chip, off, config); +} + +static inline int s3c_gpio_do_setpull(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull) +{ + return (chip->config->set_pull)(chip, off, pull); +} + +/** + * s3c_gpio_setcfg_s3c24xx - S3C24XX style GPIO configuration. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register + * has two bits of configuration per gpio, which have the following + * functions: + * 00 = input + * 01 = output + * 1x = special function +*/ +extern int s3c_gpio_setcfg_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg); + +/** + * s3c_gpio_setcfg_s3c24xx_a - S3C24XX style GPIO configuration (Bank A) + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register + * has one bit of configuration for the gpio, where setting the bit + * means the pin is in special function mode and unset means output. +*/ +extern int s3c_gpio_setcfg_s3c24xx_a(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg); + +/** + * s3c_gpio_setcfg_s3c64xx_4bit - S3C64XX 4bit single register GPIO config. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @cfg: The configuration value to set. + * + * This helper deal with the GPIO cases where the control register has 4 bits + * of control per GPIO, generally in the form of: + * 0000 = Input + * 0001 = Output + * others = Special functions (dependant on bank) + * + * Note, since the code to deal with the case where there are two control + * registers instead of one, we do not have a seperate set of functions for + * each case. +*/ +extern int s3c_gpio_setcfg_s3c64xx_4bit(struct s3c_gpio_chip *chip, + unsigned int off, unsigned int cfg); + + +/* Pull-{up,down} resistor controls. + * + * S3C2410,S3C2440,S3C24A0 = Pull-UP, + * S3C2412,S3C2413 = Pull-Down + * S3C6400,S3C6410 = Pull-Both [None,Down,Up,Undef] + * S3C2443 = Pull-Both [not same as S3C6400] + */ + +/** + * s3c_gpio_setpull_1up() - Pull configuration for choice of up or none. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @param: pull: The pull mode being requested. + * + * This is a helper function for the case where we have GPIOs with one + * bit configuring the presence of a pull-up resistor. + */ +extern int s3c_gpio_setpull_1up(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + +/** + * s3c_gpio_setpull_1down() - Pull configuration for choice of down or none + * @chip: The gpio chip that is being configured + * @off: The offset for the GPIO being configured + * @param: pull: The pull mode being requested + * + * This is a helper function for the case where we have GPIOs with one + * bit configuring the presence of a pull-down resistor. + */ +extern int s3c_gpio_setpull_1down(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + +/** + * s3c_gpio_setpull_upown() - Pull configuration for choice of up, down or none + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @param: pull: The pull mode being requested. + * + * This is a helper function for the case where we have GPIOs with two + * bits configuring the presence of a pull resistor, in the following + * order: + * 00 = No pull resistor connected + * 01 = Pull-up resistor connected + * 10 = Pull-down resistor connected + */ +extern int s3c_gpio_setpull_updown(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + + +/** + * s3c_gpio_getpull_updown() - Get configuration for choice of up, down or none + * @chip: The gpio chip that the GPIO pin belongs to + * @off: The offset to the pin to get the configuration of. + * + * This helper function reads the state of the pull-{up,down} resistor for the + * given GPIO in the same case as s3c_gpio_setpull_upown. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull_updown(struct s3c_gpio_chip *chip, + unsigned int off); + +/** + * s3c_gpio_setpull_s3c2443() - Pull configuration for s3c2443. + * @chip: The gpio chip that is being configured. + * @off: The offset for the GPIO being configured. + * @param: pull: The pull mode being requested. + * + * This is a helper function for the case where we have GPIOs with two + * bits configuring the presence of a pull resistor, in the following + * order: + * 00 = Pull-up resistor connected + * 10 = Pull-down resistor connected + * x1 = No pull up resistor + */ +extern int s3c_gpio_setpull_s3c2443(struct s3c_gpio_chip *chip, + unsigned int off, s3c_gpio_pull_t pull); + +/** + * s3c_gpio_getpull_s3c2443() - Get configuration for s3c2443 pull resistors + * @chip: The gpio chip that the GPIO pin belongs to. + * @off: The offset to the pin to get the configuration of. + * + * This helper function reads the state of the pull-{up,down} resistor for the + * given GPIO in the same case as s3c_gpio_setpull_upown. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull_s3c24xx(struct s3c_gpio_chip *chip, + unsigned int off); + +#endif /* __PLAT_GPIO_CFG_HELPERS_H */ + diff --git a/arch/arm/plat-s3c/include/plat/gpio-cfg.h b/arch/arm/plat-s3c/include/plat/gpio-cfg.h new file mode 100644 index 00000000000..29cd6a86cad --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/gpio-cfg.h @@ -0,0 +1,110 @@ +/* linux/arch/arm/plat-s3c/include/plat/gpio-cfg.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - GPIO pin configuration + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* This file contains the necessary definitions to get the basic gpio + * pin configuration done such as setting a pin to input or output or + * changing the pull-{up,down} configurations. + */ + +/* Note, this interface is being added to the s3c64xx arch first and will + * be added to the s3c24xx systems later. + */ + +#ifndef __PLAT_GPIO_CFG_H +#define __PLAT_GPIO_CFG_H __FILE__ + +typedef unsigned int __bitwise__ s3c_gpio_pull_t; + +/* forward declaration if gpio-core.h hasn't been included */ +struct s3c_gpio_chip; + +/** + * struct s3c_gpio_cfg GPIO configuration + * @cfg_eint: Configuration setting when used for external interrupt source + * @get_pull: Read the current pull configuration for the GPIO + * @set_pull: Set the current pull configuraiton for the GPIO + * @set_config: Set the current configuration for the GPIO + * @get_config: Read the current configuration for the GPIO + * + * Each chip can have more than one type of GPIO bank available and some + * have different capabilites even when they have the same control register + * layouts. Provide an point to vector control routine and provide any + * per-bank configuration information that other systems such as the + * external interrupt code will need. + */ +struct s3c_gpio_cfg { + unsigned int cfg_eint; + + s3c_gpio_pull_t (*get_pull)(struct s3c_gpio_chip *chip, unsigned offs); + int (*set_pull)(struct s3c_gpio_chip *chip, unsigned offs, + s3c_gpio_pull_t pull); + + unsigned (*get_config)(struct s3c_gpio_chip *chip, unsigned offs); + int (*set_config)(struct s3c_gpio_chip *chip, unsigned offs, + unsigned config); +}; + +#define S3C_GPIO_SPECIAL_MARK (0xfffffff0) +#define S3C_GPIO_SPECIAL(x) (S3C_GPIO_SPECIAL_MARK | (x)) + +/* Defines for generic pin configurations */ +#define S3C_GPIO_INPUT (S3C_GPIO_SPECIAL(0)) +#define S3C_GPIO_OUTPUT (S3C_GPIO_SPECIAL(1)) +#define S3C_GPIO_SFN(x) (S3C_GPIO_SPECIAL(x)) + +#define s3c_gpio_is_cfg_special(_cfg) \ + (((_cfg) & S3C_GPIO_SPECIAL_MARK) == S3C_GPIO_SPECIAL_MARK) + +/** + * s3c_gpio_cfgpin() - Change the GPIO function of a pin. + * @pin pin The pin number to configure. + * @pin to The configuration for the pin's function. + * + * Configure which function is actually connected to the external + * pin, such as an gpio input, output or some form of special function + * connected to an internal peripheral block. + */ +extern int s3c_gpio_cfgpin(unsigned int pin, unsigned int to); + +/* Define values for the pull-{up,down} available for each gpio pin. + * + * These values control the state of the weak pull-{up,down} resistors + * available on most pins on the S3C series. Not all chips support both + * up or down settings, and it may be dependant on the chip that is being + * used to whether the particular mode is available. + */ +#define S3C_GPIO_PULL_NONE ((__force s3c_gpio_pull_t)0x00) +#define S3C_GPIO_PULL_DOWN ((__force s3c_gpio_pull_t)0x01) +#define S3C_GPIO_PULL_UP ((__force s3c_gpio_pull_t)0x02) + +/** + * s3c_gpio_setpull() - set the state of a gpio pin pull resistor + * @pin: The pin number to configure the pull resistor. + * @pull: The configuration for the pull resistor. + * + * This function sets the state of the pull-{up,down} resistor for the + * specified pin. It will return 0 if successfull, or a negative error + * code if the pin cannot support the requested pull setting. +*/ +extern int s3c_gpio_setpull(unsigned int pin, s3c_gpio_pull_t pull); + +/** + * s3c_gpio_getpull() - get the pull resistor state of a gpio pin + * @pin: The pin number to get the settings for + * + * Read the pull resistor value for the specified pin. +*/ +extern s3c_gpio_pull_t s3c_gpio_getpull(unsigned int pin); + +#endif /* __PLAT_GPIO_CFG_H */ diff --git a/arch/arm/plat-s3c/include/plat/gpio-core.h b/arch/arm/plat-s3c/include/plat/gpio-core.h new file mode 100644 index 00000000000..2fc60a580ac --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/gpio-core.h @@ -0,0 +1,77 @@ +/* linux/arch/arm/plat-s3c/include/plat/gpio-core.h + * + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - GPIO core + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Define the core gpiolib support functions that the s3c platforms may + * need to extend or change depending on the hardware and the s3c chip + * selected at build or found at run time. + * + * These definitions are not intended for driver inclusion, there is + * nothing here that should not live outside the platform and core + * specific code. +*/ + +struct s3c_gpio_cfg; + +/** + * struct s3c_gpio_chip - wrapper for specific implementation of gpio + * @chip: The chip structure to be exported via gpiolib. + * @base: The base pointer to the gpio configuration registers. + * @config: special function and pull-resistor control information. + * + * This wrapper provides the necessary information for the Samsung + * specific gpios being registered with gpiolib. + */ +struct s3c_gpio_chip { + struct gpio_chip chip; + struct s3c_gpio_cfg *config; + void __iomem *base; +}; + +static inline struct s3c_gpio_chip *to_s3c_gpio(struct gpio_chip *gpc) +{ + return container_of(gpc, struct s3c_gpio_chip, chip); +} + +/** s3c_gpiolib_add() - add the s3c specific version of a gpio_chip. + * @chip: The chip to register + * + * This is a wrapper to gpiochip_add() that takes our specific gpio chip + * information and makes the necessary alterations for the platform and + * notes the information for use with the configuration systems and any + * other parts of the system. + */ +extern void s3c_gpiolib_add(struct s3c_gpio_chip *chip); + +/* CONFIG_S3C_GPIO_TRACK enables the tracking of the s3c specific gpios + * for use with the configuration calls, and other parts of the s3c gpiolib + * support code. + * + * Not all s3c support code will need this, as some configurations of cpu + * may only support one or two different configuration options and have an + * easy gpio to s3c_gpio_chip mapping function. If this is the case, then + * the machine support file should provide its own s3c_gpiolib_getchip() + * and any other necessary functions. + */ + +#ifdef CONFIG_S3C_GPIO_TRACK +extern struct s3c_gpio_chip *s3c_gpios[S3C_GPIO_END]; + +static inline struct s3c_gpio_chip *s3c_gpiolib_getchip(unsigned int chip) +{ + return (chip < S3C_GPIO_END) ? s3c_gpios[chip] : NULL; +} +#else +/* machine specific code should provide s3c_gpiolib_getchip */ + +static inline void s3c_gpiolib_track(struct s3c_gpio_chip *chip) { } +#endif diff --git a/arch/arm/plat-s3c/include/plat/iic-core.h b/arch/arm/plat-s3c/include/plat/iic-core.h new file mode 100644 index 00000000000..36397ca2096 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/iic-core.h @@ -0,0 +1,35 @@ +/* arch/arm/mach-s3c2410/include/mach/iic-core.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C - I2C Controller core functions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_ARCH_IIC_CORE_H +#define __ASM_ARCH_IIC_CORE_H __FILE__ + +/* These functions are only for use with the core support code, such as + * the cpu specific initialisation code + */ + +/* re-define device name depending on support. */ +static inline void s3c_i2c0_setname(char *name) +{ + /* currently this device is always compiled in */ + s3c_device_i2c0.name = name; +} + +static inline void s3c_i2c1_setname(char *name) +{ +#ifdef CONFIG_S3C_DEV_I2C1 + s3c_device_i2c1.name = name; +#endif +} + +#endif /* __ASM_ARCH_IIC_H */ diff --git a/include/asm-arm/plat-s3c/iic.h b/arch/arm/plat-s3c/include/plat/iic.h index 5106acaa1d0..dc1dfcb9bc6 100644 --- a/include/asm-arm/plat-s3c/iic.h +++ b/arch/arm/plat-s3c/include/plat/iic.h @@ -28,6 +28,30 @@ struct s3c2410_platform_i2c { unsigned long max_freq; /* max frequency for the bus */ unsigned long min_freq; /* min frequency for the bus */ unsigned int sda_delay; /* pclks (s3c2440 only) */ + + void (*cfg_gpio)(struct platform_device *dev); }; +/** + * s3c_i2c0_set_platdata - set platform data for i2c0 device + * @i2c: The platform data to set, or NULL for default data. + * + * Register the given platform data for use with the i2c0 device. This + * call copies the platform data, so the caller can use __initdata for + * their copy. + * + * This call will set cfg_gpio if is null to the default platform + * implementation. + * + * Any user of s3c_device_i2c0 should call this, even if it is with + * NULL to ensure that the device is given the default platform data + * as the driver will no longer carry defaults. + */ +extern void s3c_i2c0_set_platdata(struct s3c2410_platform_i2c *i2c); +extern void s3c_i2c1_set_platdata(struct s3c2410_platform_i2c *i2c); + +/* defined by architecture to configure gpio */ +extern void s3c_i2c0_cfg_gpio(struct platform_device *dev); +extern void s3c_i2c1_cfg_gpio(struct platform_device *dev); + #endif /* __ASM_ARCH_IIC_H */ diff --git a/arch/arm/plat-s3c/include/plat/map.h b/arch/arm/plat-s3c/include/plat/map-base.h index b84289d32a5..b84289d32a5 100644 --- a/arch/arm/plat-s3c/include/plat/map.h +++ b/arch/arm/plat-s3c/include/plat/map-base.h diff --git a/include/asm-arm/plat-s3c/nand.h b/arch/arm/plat-s3c/include/plat/nand.h index f4dcd14af05..f4dcd14af05 100644 --- a/include/asm-arm/plat-s3c/nand.h +++ b/arch/arm/plat-s3c/include/plat/nand.h diff --git a/include/asm-arm/plat-s3c/regs-ac97.h b/arch/arm/plat-s3c/include/plat/regs-ac97.h index c3878f7acb8..c3878f7acb8 100644 --- a/include/asm-arm/plat-s3c/regs-ac97.h +++ b/arch/arm/plat-s3c/include/plat/regs-ac97.h diff --git a/include/asm-arm/plat-s3c/regs-iic.h b/arch/arm/plat-s3c/include/plat/regs-iic.h index 2f7c17de8ac..2f7c17de8ac 100644 --- a/include/asm-arm/plat-s3c/regs-iic.h +++ b/arch/arm/plat-s3c/include/plat/regs-iic.h diff --git a/arch/arm/plat-s3c/include/plat/regs-irqtype.h b/arch/arm/plat-s3c/include/plat/regs-irqtype.h new file mode 100644 index 00000000000..c63cd3fc5ad --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-irqtype.h @@ -0,0 +1,21 @@ +/* arch/arm/plat-s3c/include/plat/regs-irqtype.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C - IRQ detection types. + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +/* values for S3C2410_EXTINT0/1/2 and other cpus in the series, including + * the S3C64XX +*/ +#define S3C2410_EXTINT_LOWLEV (0x00) +#define S3C2410_EXTINT_HILEV (0x01) +#define S3C2410_EXTINT_FALLEDGE (0x02) +#define S3C2410_EXTINT_RISEEDGE (0x04) +#define S3C2410_EXTINT_BOTHEDGE (0x06) diff --git a/include/asm-arm/plat-s3c/regs-nand.h b/arch/arm/plat-s3c/include/plat/regs-nand.h index b2caa4bca27..b2caa4bca27 100644 --- a/include/asm-arm/plat-s3c/regs-nand.h +++ b/arch/arm/plat-s3c/include/plat/regs-nand.h diff --git a/include/asm-arm/plat-s3c/regs-rtc.h b/arch/arm/plat-s3c/include/plat/regs-rtc.h index d5837cf8e40..d5837cf8e40 100644 --- a/include/asm-arm/plat-s3c/regs-rtc.h +++ b/arch/arm/plat-s3c/include/plat/regs-rtc.h diff --git a/arch/arm/plat-s3c/include/plat/regs-sdhci.h b/arch/arm/plat-s3c/include/plat/regs-sdhci.h new file mode 100644 index 00000000000..e34049ad44c --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/regs-sdhci.h @@ -0,0 +1,87 @@ +/* linux/arch/arm/plat-s3c/include/plat/regs-sdhci.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - SDHCI (HSMMC) register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_S3C_SDHCI_REGS_H +#define __PLAT_S3C_SDHCI_REGS_H __FILE__ + +#define S3C_SDHCI_CONTROL2 (0x80) +#define S3C_SDHCI_CONTROL3 (0x84) +#define S3C64XX_SDHCI_CONTROL4 (0x8C) + +#define S3C64XX_SDHCI_CTRL2_ENSTAASYNCCLR (1 << 31) +#define S3C64XX_SDHCI_CTRL2_ENCMDCNFMSK (1 << 30) +#define S3C_SDHCI_CTRL2_CDINVRXD3 (1 << 29) +#define S3C_SDHCI_CTRL2_SLCARDOUT (1 << 28) + +#define S3C_SDHCI_CTRL2_FLTCLKSEL_MASK (0xf << 24) +#define S3C_SDHCI_CTRL2_FLTCLKSEL_SHIFT (24) +#define S3C_SDHCI_CTRL2_FLTCLKSEL(_x) ((_x) << 24) + +#define S3C_SDHCI_CTRL2_LVLDAT_MASK (0xff << 16) +#define S3C_SDHCI_CTRL2_LVLDAT_SHIFT (16) +#define S3C_SDHCI_CTRL2_LVLDAT(_x) ((_x) << 16) + +#define S3C_SDHCI_CTRL2_ENFBCLKTX (1 << 15) +#define S3C_SDHCI_CTRL2_ENFBCLKRX (1 << 14) +#define S3C_SDHCI_CTRL2_SDCDSEL (1 << 13) +#define S3C_SDHCI_CTRL2_SDSIGPC (1 << 12) +#define S3C_SDHCI_CTRL2_ENBUSYCHKTXSTART (1 << 11) + +#define S3C_SDHCI_CTRL2_DFCNT_MASK (0x3 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_SHIFT (9) +#define S3C_SDHCI_CTRL2_DFCNT_NONE (0x0 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_4SDCLK (0x1 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_16SDCLK (0x2 << 9) +#define S3C_SDHCI_CTRL2_DFCNT_64SDCLK (0x3 << 9) + +#define S3C_SDHCI_CTRL2_ENCLKOUTHOLD (1 << 8) +#define S3C_SDHCI_CTRL2_RWAITMODE (1 << 7) +#define S3C_SDHCI_CTRL2_DISBUFRD (1 << 6) +#define S3C_SDHCI_CTRL2_SELBASECLK_MASK (0x3 << 4) +#define S3C_SDHCI_CTRL2_SELBASECLK_SHIFT (4) +#define S3C_SDHCI_CTRL2_PWRSYNC (1 << 3) +#define S3C_SDHCI_CTRL2_ENCLKOUTMSKCON (1 << 1) +#define S3C_SDHCI_CTRL2_HWINITFIN (1 << 0) + +#define S3C_SDHCI_CTRL3_FCSEL3 (1 << 31) +#define S3C_SDHCI_CTRL3_FCSEL2 (1 << 23) +#define S3C_SDHCI_CTRL3_FCSEL1 (1 << 15) +#define S3C_SDHCI_CTRL3_FCSEL0 (1 << 7) + +#define S3C_SDHCI_CTRL3_FIA3_MASK (0x7f << 24) +#define S3C_SDHCI_CTRL3_FIA3_SHIFT (24) +#define S3C_SDHCI_CTRL3_FIA3(_x) ((_x) << 24) + +#define S3C_SDHCI_CTRL3_FIA2_MASK (0x7f << 16) +#define S3C_SDHCI_CTRL3_FIA2_SHIFT (16) +#define S3C_SDHCI_CTRL3_FIA2(_x) ((_x) << 16) + +#define S3C_SDHCI_CTRL3_FIA1_MASK (0x7f << 8) +#define S3C_SDHCI_CTRL3_FIA1_SHIFT (8) +#define S3C_SDHCI_CTRL3_FIA1(_x) ((_x) << 8) + +#define S3C_SDHCI_CTRL3_FIA0_MASK (0x7f << 0) +#define S3C_SDHCI_CTRL3_FIA0_SHIFT (0) +#define S3C_SDHCI_CTRL3_FIA0(_x) ((_x) << 0) + +#define S3C64XX_SDHCI_CONTROL4_DRIVE_MASK (0x3 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_SHIFT (16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_2mA (0x0 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_4mA (0x1 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_7mA (0x2 << 16) +#define S3C64XX_SDHCI_CONTROL4_DRIVE_9mA (0x3 << 16) + +#define S3C64XX_SDHCI_CONTROL4_BUSY (1) + +#endif /* __PLAT_S3C_SDHCI_REGS_H */ diff --git a/arch/arm/plat-s3c/include/plat/regs-serial.h b/arch/arm/plat-s3c/include/plat/regs-serial.h index a0daa647b92..3ca28585cf8 100644 --- a/arch/arm/plat-s3c/include/plat/regs-serial.h +++ b/arch/arm/plat-s3c/include/plat/regs-serial.h @@ -77,6 +77,12 @@ #define S3C2440_UCON_FCLK (3<<10) #define S3C2443_UCON_EPLL (3<<10) +#define S3C6400_UCON_CLKMASK (3<<10) +#define S3C6400_UCON_PCLK (0<<10) +#define S3C6400_UCON_PCLK2 (2<<10) +#define S3C6400_UCON_UCLK0 (1<<10) +#define S3C6400_UCON_UCLK1 (3<<10) + #define S3C2440_UCON2_FCLK_EN (1<<15) #define S3C2440_UCON0_DIVMASK (15 << 12) #define S3C2440_UCON1_DIVMASK (15 << 12) @@ -149,6 +155,14 @@ #define S3C2410_UFSTAT_RXMASK (15<<0) #define S3C2410_UFSTAT_RXSHIFT (0) +/* UFSTAT S3C24A0 */ +#define S3C24A0_UFSTAT_TXFULL (1 << 14) +#define S3C24A0_UFSTAT_RXFULL (1 << 6) +#define S3C24A0_UFSTAT_TXMASK (63 << 8) +#define S3C24A0_UFSTAT_TXSHIFT (8) +#define S3C24A0_UFSTAT_RXMASK (63) +#define S3C24A0_UFSTAT_RXSHIFT (0) + /* UFSTAT S3C2443 same as S3C2440 */ #define S3C2440_UFSTAT_TXFULL (1<<14) #define S3C2440_UFSTAT_RXFULL (1<<6) diff --git a/arch/arm/plat-s3c/include/plat/regs-timer.h b/arch/arm/plat-s3c/include/plat/regs-timer.h index cc0eedd53e3..086ce268583 100644 --- a/arch/arm/plat-s3c/include/plat/regs-timer.h +++ b/arch/arm/plat-s3c/include/plat/regs-timer.h @@ -10,7 +10,6 @@ * S3C2410 Timer configuration */ - #ifndef __ASM_ARCH_REGS_TIMER_H #define __ASM_ARCH_REGS_TIMER_H @@ -21,6 +20,8 @@ #define S3C2410_TCFG1 S3C_TIMERREG(0x04) #define S3C2410_TCON S3C_TIMERREG(0x08) +#define S3C64XX_TINT_CSTAT S3C_TIMERREG(0x44) + #define S3C2410_TCFG_PRESCALER0_MASK (255<<0) #define S3C2410_TCFG_PRESCALER1_MASK (255<<8) #define S3C2410_TCFG_PRESCALER1_SHIFT (8) diff --git a/include/asm-arm/plat-s3c/regs-watchdog.h b/arch/arm/plat-s3c/include/plat/regs-watchdog.h index 4938492470f..4938492470f 100644 --- a/include/asm-arm/plat-s3c/regs-watchdog.h +++ b/arch/arm/plat-s3c/include/plat/regs-watchdog.h diff --git a/arch/arm/plat-s3c/include/plat/sdhci.h b/arch/arm/plat-s3c/include/plat/sdhci.h new file mode 100644 index 00000000000..c4ca3920ca4 --- /dev/null +++ b/arch/arm/plat-s3c/include/plat/sdhci.h @@ -0,0 +1,108 @@ +/* linux/arch/arm/plat-s3c/include/plat/sdhci.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C Platform - SDHCI (HSMMC) platform data definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_S3C_SDHCI_H +#define __PLAT_S3C_SDHCI_H __FILE__ + +struct platform_device; +struct mmc_host; +struct mmc_card; +struct mmc_ios; + +/** + * struct s3c_sdhci_platdata() - Platform device data for Samsung SDHCI + * @max_width: The maximum number of data bits supported. + * @host_caps: Standard MMC host capabilities bit field. + * @cfg_gpio: Configure the GPIO for a specific card bit-width + * @cfg_card: Configure the interface for a specific card and speed. This + * is necessary the controllers and/or GPIO blocks require the + * changing of driver-strength and other controls dependant on + * the card and speed of operation. + * + * Initialisation data specific to either the machine or the platform + * for the device driver to use or call-back when configuring gpio or + * card speed information. +*/ +struct s3c_sdhci_platdata { + unsigned int max_width; + unsigned int host_caps; + + char **clocks; /* set of clock sources */ + + void (*cfg_gpio)(struct platform_device *dev, int width); + void (*cfg_card)(struct platform_device *dev, + void __iomem *regbase, + struct mmc_ios *ios, + struct mmc_card *card); +}; + +/** + * s3c_sdhci0_set_platdata - Set platform data for S3C SDHCI device. + * @pd: Platform data to register to device. + * + * Register the given platform data for use withe S3C SDHCI device. + * The call will copy the platform data, so the board definitions can + * make the structure itself __initdata. + */ +extern void s3c_sdhci0_set_platdata(struct s3c_sdhci_platdata *pd); +extern void s3c_sdhci1_set_platdata(struct s3c_sdhci_platdata *pd); + +/* Default platform data, exported so that per-cpu initialisation can + * set the correct one when there are more than one cpu type selected. +*/ + +extern struct s3c_sdhci_platdata s3c_hsmmc0_def_platdata; +extern struct s3c_sdhci_platdata s3c_hsmmc1_def_platdata; + +/* Helper function availablity */ + +#ifdef CONFIG_S3C6410_SETUP_SDHCI +extern char *s3c6410_hsmmc_clksrcs[4]; + +extern void s3c6410_setup_sdhci0_cfg_gpio(struct platform_device *, int w); +extern void s3c6410_setup_sdhci1_cfg_gpio(struct platform_device *, int w); + +extern void s3c6410_setup_sdhci0_cfg_card(struct platform_device *dev, + void __iomem *r, + struct mmc_ios *ios, + struct mmc_card *card); + +#ifdef CONFIG_S3C_DEV_HSMMC +static inline void s3c6410_default_sdhci0(void) +{ + s3c_hsmmc0_def_platdata.clocks = s3c6410_hsmmc_clksrcs; + s3c_hsmmc0_def_platdata.cfg_gpio = s3c6410_setup_sdhci0_cfg_gpio; + s3c_hsmmc0_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card; +} +#else +static inline void s3c6410_default_sdhci0(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC */ + +#ifdef CONFIG_S3C_DEV_HSMMC1 +static inline void s3c6410_default_sdhci1(void) +{ + s3c_hsmmc1_def_platdata.clocks = s3c6410_hsmmc_clksrcs; + s3c_hsmmc1_def_platdata.cfg_gpio = s3c6410_setup_sdhci1_cfg_gpio; + s3c_hsmmc1_def_platdata.cfg_card = s3c6410_setup_sdhci0_cfg_card; +} +#else +static inline void s3c6410_default_sdhci1(void) { } +#endif /* CONFIG_S3C_DEV_HSMMC1 */ + +#else +static inline void s3c6410_default_sdhci0(void) { } +static inline void s3c6410_default_sdhci1(void) { } +#endif /* CONFIG_S3C6410_SETUP_SDHCI */ + +#endif /* __PLAT_S3C_SDHCI_H */ diff --git a/arch/arm/plat-s3c/include/plat/uncompress.h b/arch/arm/plat-s3c/include/plat/uncompress.h index 4df006b9cc1..eeef32c4312 100644 --- a/arch/arm/plat-s3c/include/plat/uncompress.h +++ b/arch/arm/plat-s3c/include/plat/uncompress.h @@ -28,7 +28,7 @@ static void arch_detect_cpu(void); /* defines for UART registers */ #include <plat/regs-serial.h> -#include <asm/plat-s3c/regs-watchdog.h> +#include <plat/regs-watchdog.h> /* working in physical space... */ #undef S3C2410_WDOGREG @@ -37,7 +37,7 @@ static void arch_detect_cpu(void); /* how many bytes we allow into the FIFO at a time in FIFO mode */ #define FIFO_MAX (14) -#define uart_base S3C24XX_PA_UART + (0x4000*CONFIG_S3C_LOWLEVEL_UART_PORT) +#define uart_base S3C_PA_UART + (S3C_UART_OFFSET * CONFIG_S3C_LOWLEVEL_UART_PORT) static __inline__ void uart_wr(unsigned int reg, unsigned int val) diff --git a/arch/arm/plat-s3c/init.c b/arch/arm/plat-s3c/init.c new file mode 100644 index 00000000000..da8d089f6db --- /dev/null +++ b/arch/arm/plat-s3c/init.c @@ -0,0 +1,161 @@ +/* linux/arch/arm/plat-s3c/init.c + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C series CPU initialisation + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/delay.h> + +#include <mach/hardware.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> + +#include <plat/regs-serial.h> + +static struct cpu_table *cpu; + +static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode, + struct cpu_table *tab, + unsigned int count) +{ + for (; count != 0; count--, tab++) { + if ((idcode & tab->idmask) == tab->idcode) + return tab; + } + + return NULL; +} + +void __init s3c_init_cpu(unsigned long idcode, + struct cpu_table *cputab, unsigned int cputab_size) +{ + cpu = s3c_lookup_cpu(idcode, cputab, cputab_size); + + if (cpu == NULL) { + printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode); + panic("Unknown S3C24XX CPU"); + } + + printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode); + + if (cpu->map_io == NULL || cpu->init == NULL) { + printk(KERN_ERR "CPU %s support not enabled\n", cpu->name); + panic("Unsupported Samsung CPU"); + } + + cpu->map_io(); +} + +/* s3c24xx_init_clocks + * + * Initialise the clock subsystem and associated information from the + * given master crystal value. + * + * xtal = 0 -> use default PLL crystal value (normally 12MHz) + * != 0 -> PLL crystal value in Hz +*/ + +void __init s3c24xx_init_clocks(int xtal) +{ + if (xtal == 0) + xtal = 12*1000*1000; + + if (cpu == NULL) + panic("s3c24xx_init_clocks: no cpu setup?\n"); + + if (cpu->init_clocks == NULL) + panic("s3c24xx_init_clocks: cpu has no clock init\n"); + else + (cpu->init_clocks)(xtal); +} + +/* uart management */ + +static int nr_uarts __initdata = 0; + +static struct s3c2410_uartcfg uart_cfgs[CONFIG_SERIAL_SAMSUNG_UARTS]; + +/* s3c24xx_init_uartdevs + * + * copy the specified platform data and configuration into our central + * set of devices, before the data is thrown away after the init process. + * + * This also fills in the array passed to the serial driver for the + * early initialisation of the console. +*/ + +void __init s3c24xx_init_uartdevs(char *name, + struct s3c24xx_uart_resources *res, + struct s3c2410_uartcfg *cfg, int no) +{ + struct platform_device *platdev; + struct s3c2410_uartcfg *cfgptr = uart_cfgs; + struct s3c24xx_uart_resources *resp; + int uart; + + memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no); + + for (uart = 0; uart < no; uart++, cfg++, cfgptr++) { + platdev = s3c24xx_uart_src[cfgptr->hwport]; + + resp = res + cfgptr->hwport; + + s3c24xx_uart_devs[uart] = platdev; + + platdev->name = name; + platdev->resource = resp->resources; + platdev->num_resources = resp->nr_resources; + + platdev->dev.platform_data = cfgptr; + } + + nr_uarts = no; +} + +void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + if (cpu == NULL) + return; + + if (cpu->init_uarts == NULL) { + printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n"); + } else + (cpu->init_uarts)(cfg, no); +} + +static int __init s3c_arch_init(void) +{ + int ret; + + // do the correct init for cpu + + if (cpu == NULL) + panic("s3c_arch_init: NULL cpu\n"); + + ret = (cpu->init)(); + if (ret != 0) + return ret; + + ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts); + return ret; +} + +arch_initcall(s3c_arch_init); diff --git a/arch/arm/plat-s3c24xx/pwm-clock.c b/arch/arm/plat-s3c/pwm-clock.c index 3fad68a1e6b..5ccabe4eb7b 100644 --- a/arch/arm/plat-s3c24xx/pwm-clock.c +++ b/arch/arm/plat-s3c/pwm-clock.c @@ -19,11 +19,9 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <mach/map.h> #include <asm/irq.h> -#include <mach/regs-clock.h> -#include <mach/regs-gpio.h> - #include <plat/clock.h> #include <plat/cpu.h> diff --git a/arch/arm/plat-s3c24xx/time.c b/arch/arm/plat-s3c/time.c index c51916236ac..a581ff7ba66 100644 --- a/arch/arm/plat-s3c24xx/time.c +++ b/arch/arm/plat-s3c/time.c @@ -36,6 +36,7 @@ #include <plat/regs-timer.h> #include <mach/regs-irq.h> #include <asm/mach/time.h> +#include <mach/tick.h> #include <plat/clock.h> #include <plat/cpu.h> @@ -43,6 +44,10 @@ static unsigned long timer_startval; static unsigned long timer_usec_ticks; +#ifndef TICK_MAX +#define TICK_MAX (0xffff) +#endif + #define TIMER_USEC_SHIFT 16 /* we use the shifted arithmetic to work out the ratio of timer ticks @@ -91,23 +96,19 @@ static inline unsigned long timer_ticks_to_usec(unsigned long ticks) * IRQs are disabled before entering here from do_gettimeofday() */ -#define SRCPND_TIMER4 (1<<(IRQ_TIMER4 - IRQ_EINT0)) - static unsigned long s3c2410_gettimeoffset (void) { unsigned long tdone; - unsigned long irqpend; unsigned long tval; /* work out how many ticks have gone since last timer interrupt */ - tval = __raw_readl(S3C2410_TCNTO(4)); + tval = __raw_readl(S3C2410_TCNTO(4)); tdone = timer_startval - tval; /* check to see if there is an interrupt pending */ - irqpend = __raw_readl(S3C2410_SRCPND); - if (irqpend & SRCPND_TIMER4) { + if (s3c24xx_ostimer_pending()) { /* re-read the timer, and try and fix up for the missed * interrupt. Note, the interrupt may go off before the * timer has re-loaded from wrapping. @@ -144,7 +145,7 @@ static struct irqaction s3c2410_timer_irq = { machine_is_bast() || \ machine_is_vr1000() || \ machine_is_anubis() || \ - machine_is_osiris() ) + machine_is_osiris()) /* * Set up timer interrupt, and return the current time in seconds. @@ -159,7 +160,7 @@ static void s3c2410_timer_setup (void) unsigned long tcfg1; unsigned long tcfg0; - tcnt = 0xffff; /* default value for tcnt */ + tcnt = TICK_MAX; /* default value for tcnt */ /* read the current timer configuration bits */ @@ -216,11 +217,11 @@ static void s3c2410_timer_setup (void) tcnt--; - printk("timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n", + printk(KERN_DEBUG "timer tcon=%08lx, tcnt %04lx, tcfg %08lx,%08lx, usec %08lx\n", tcon, tcnt, tcfg0, tcfg1, timer_usec_ticks); /* check to see if timer is within 16bit range... */ - if (tcnt > 0xffff) { + if (tcnt > TICK_MAX) { panic("setup_timer: HZ is too small, cannot configure timer!"); return; } @@ -247,7 +248,7 @@ static void s3c2410_timer_setup (void) __raw_writel(tcon, S3C2410_TCON); } -static void __init s3c2410_timer_init (void) +static void __init s3c2410_timer_init(void) { s3c2410_timer_setup(); setup_irq(IRQ_TIMER4, &s3c2410_timer_irq); diff --git a/arch/arm/plat-s3c24xx/Kconfig b/arch/arm/plat-s3c24xx/Kconfig index 0af3872fb76..f0d54fdf88d 100644 --- a/arch/arm/plat-s3c24xx/Kconfig +++ b/arch/arm/plat-s3c24xx/Kconfig @@ -6,8 +6,8 @@ config PLAT_S3C24XX bool - depends on ARCH_S3C2410 - default y if ARCH_S3C2410 + depends on ARCH_S3C2410 || ARCH_S3C24A0 + default y select NO_IOPORT select ARCH_REQUIRE_GPIOLIB help @@ -15,6 +15,19 @@ config PLAT_S3C24XX if PLAT_S3C24XX +# code that is shared between a number of the s3c24xx implementations + +config S3C2410_CLOCK + bool + help + Clock code for the S3C2410, and similar processors which + is currently includes the S3C2410, S3C2440, S3C2442. + +config S3C24XX_DCLK + bool + help + Clock code for supporting DCLK/CLKOUT on S3C24XX architectures + config CPU_S3C244X bool depends on ARCH_S3C2410 && (CPU_S3C2440 || CPU_S3C2442) @@ -49,6 +62,22 @@ config S3C2410_DMA_DEBUG Enable debugging output for the DMA code. This option sends info to the kernel log, at priority KERN_DEBUG. +# SPI default pin configuration code + +config S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13 + bool + help + SPI GPIO configuration code for BUS0 when connected to + GPE11, GPE12 and GPE13. + +config S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7 + bool + help + SPI GPIO configuration code for BUS 1 when connected to + GPG5, GPG6 and GPG7. + +# common code for s3c24xx based machines, such as the SMDKs. + config MACH_SMDK bool help diff --git a/arch/arm/plat-s3c24xx/Makefile b/arch/arm/plat-s3c24xx/Makefile index d82767b2b83..763d3444048 100644 --- a/arch/arm/plat-s3c24xx/Makefile +++ b/arch/arm/plat-s3c24xx/Makefile @@ -17,9 +17,8 @@ obj-y += irq.o obj-y += devs.o obj-y += gpio.o obj-y += gpiolib.o -obj-y += time.o obj-y += clock.o -obj-y += pwm-clock.o +obj-$(CONFIG_S3C24XX_DCLK) += clock-dclk.o # Architecture dependant builds @@ -30,5 +29,17 @@ obj-$(CONFIG_PM_SIMTEC) += pm-simtec.o obj-$(CONFIG_PM) += pm.o obj-$(CONFIG_PM) += sleep.o obj-$(CONFIG_HAVE_PWM) += pwm.o +obj-$(CONFIG_S3C2410_CLOCK) += s3c2410-clock.o obj-$(CONFIG_S3C2410_DMA) += dma.o + +# device specific setup and/or initialisation +obj-$(CONFIG_ARCH_S3C2410) += setup-i2c.o + +# SPI gpio central GPIO functions + +obj-$(CONFIG_S3C24XX_SPI_BUS0_GPE11_GPE12_GPE13) += spi-bus0-gpe11_12_13.o +obj-$(CONFIG_S3C24XX_SPI_BUS1_GPG5_GPG6_GPG7) += spi-bus1-gpg5_6_7.o + +# machine common support + obj-$(CONFIG_MACH_SMDK) += common-smdk.o diff --git a/arch/arm/plat-s3c24xx/clock-dclk.c b/arch/arm/plat-s3c24xx/clock-dclk.c new file mode 100644 index 00000000000..5b75a797b5a --- /dev/null +++ b/arch/arm/plat-s3c24xx/clock-dclk.c @@ -0,0 +1,194 @@ +/* linux/arch/arm/plat-s3c24xx/clock-dclk.c + * + * Copyright (c) 2004,2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * S3C24XX - definitions for DCLK and CLKOUT registers + */ + +#include <linux/kernel.h> +#include <linux/errno.h> +#include <linux/clk.h> +#include <linux/io.h> + +#include <mach/regs-clock.h> +#include <mach/regs-gpio.h> + +#include <plat/clock.h> +#include <plat/cpu.h> + +/* clocks that could be registered by external code */ + +static int s3c24xx_dclk_enable(struct clk *clk, int enable) +{ + unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON); + + if (enable) + dclkcon |= clk->ctrlbit; + else + dclkcon &= ~clk->ctrlbit; + + __raw_writel(dclkcon, S3C24XX_DCLKCON); + + return 0; +} + +static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent) +{ + unsigned long dclkcon; + unsigned int uclk; + + if (parent == &clk_upll) + uclk = 1; + else if (parent == &clk_p) + uclk = 0; + else + return -EINVAL; + + clk->parent = parent; + + dclkcon = __raw_readl(S3C24XX_DCLKCON); + + if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) { + if (uclk) + dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK; + else + dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK; + } else { + if (uclk) + dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK; + else + dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK; + } + + __raw_writel(dclkcon, S3C24XX_DCLKCON); + + return 0; +} +static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate) +{ + unsigned long div; + + if ((rate == 0) || !clk->parent) + return 0; + + div = clk_get_rate(clk->parent) / rate; + if (div < 2) + div = 2; + else if (div > 16) + div = 16; + + return div; +} + +static unsigned long s3c24xx_round_dclk_rate(struct clk *clk, + unsigned long rate) +{ + unsigned long div = s3c24xx_calc_div(clk, rate); + + if (div == 0) + return 0; + + return clk_get_rate(clk->parent) / div; +} + +static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate) +{ + unsigned long mask, data, div = s3c24xx_calc_div(clk, rate); + + if (div == 0) + return -EINVAL; + + if (clk == &s3c24xx_dclk0) { + mask = S3C2410_DCLKCON_DCLK0_DIV_MASK | + S3C2410_DCLKCON_DCLK0_CMP_MASK; + data = S3C2410_DCLKCON_DCLK0_DIV(div) | + S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2); + } else if (clk == &s3c24xx_dclk1) { + mask = S3C2410_DCLKCON_DCLK1_DIV_MASK | + S3C2410_DCLKCON_DCLK1_CMP_MASK; + data = S3C2410_DCLKCON_DCLK1_DIV(div) | + S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2); + } else + return -EINVAL; + + clk->rate = clk_get_rate(clk->parent) / div; + __raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data), + S3C24XX_DCLKCON); + return clk->rate; +} +static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) +{ + unsigned long mask; + unsigned long source; + + /* calculate the MISCCR setting for the clock */ + + if (parent == &clk_xtal) + source = S3C2410_MISCCR_CLK0_MPLL; + else if (parent == &clk_upll) + source = S3C2410_MISCCR_CLK0_UPLL; + else if (parent == &clk_f) + source = S3C2410_MISCCR_CLK0_FCLK; + else if (parent == &clk_h) + source = S3C2410_MISCCR_CLK0_HCLK; + else if (parent == &clk_p) + source = S3C2410_MISCCR_CLK0_PCLK; + else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0) + source = S3C2410_MISCCR_CLK0_DCLK0; + else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1) + source = S3C2410_MISCCR_CLK0_DCLK0; + else + return -EINVAL; + + clk->parent = parent; + + if (clk == &s3c24xx_clkout0) + mask = S3C2410_MISCCR_CLK0_MASK; + else { + source <<= 4; + mask = S3C2410_MISCCR_CLK1_MASK; + } + + s3c2410_modify_misccr(mask, source); + return 0; +} + +/* external clock definitions */ + +struct clk s3c24xx_dclk0 = { + .name = "dclk0", + .id = -1, + .ctrlbit = S3C2410_DCLKCON_DCLK0EN, + .enable = s3c24xx_dclk_enable, + .set_parent = s3c24xx_dclk_setparent, + .set_rate = s3c24xx_set_dclk_rate, + .round_rate = s3c24xx_round_dclk_rate, +}; + +struct clk s3c24xx_dclk1 = { + .name = "dclk1", + .id = -1, + .ctrlbit = S3C2410_DCLKCON_DCLK1EN, + .enable = s3c24xx_dclk_enable, + .set_parent = s3c24xx_dclk_setparent, + .set_rate = s3c24xx_set_dclk_rate, + .round_rate = s3c24xx_round_dclk_rate, +}; + +struct clk s3c24xx_clkout0 = { + .name = "clkout0", + .id = -1, + .set_parent = s3c24xx_clkout_setparent, +}; + +struct clk s3c24xx_clkout1 = { + .name = "clkout1", + .id = -1, + .set_parent = s3c24xx_clkout_setparent, +}; diff --git a/arch/arm/plat-s3c24xx/clock.c b/arch/arm/plat-s3c24xx/clock.c index a005ddbd9ef..8474d05274b 100644 --- a/arch/arm/plat-s3c24xx/clock.c +++ b/arch/arm/plat-s3c24xx/clock.c @@ -27,18 +27,8 @@ */ #include <linux/init.h> -#include <linux/module.h> #include <linux/kernel.h> -#include <linux/list.h> -#include <linux/errno.h> -#include <linux/err.h> -#include <linux/platform_device.h> -#include <linux/sysdev.h> -#include <linux/interrupt.h> -#include <linux/ioport.h> #include <linux/clk.h> -#include <linux/mutex.h> -#include <linux/delay.h> #include <linux/io.h> #include <mach/hardware.h> @@ -47,490 +37,23 @@ #include <mach/regs-clock.h> #include <mach/regs-gpio.h> +#include <plat/cpu-freq.h> + #include <plat/clock.h> #include <plat/cpu.h> - -/* clock information */ - -static LIST_HEAD(clocks); - -DEFINE_MUTEX(clocks_mutex); - -/* enable and disable calls for use with the clk struct */ - -static int clk_null_enable(struct clk *clk, int enable) -{ - return 0; -} - -/* Clock API calls */ - -struct clk *clk_get(struct device *dev, const char *id) -{ - struct clk *p; - struct clk *clk = ERR_PTR(-ENOENT); - int idno; - - if (dev == NULL || dev->bus != &platform_bus_type) - idno = -1; - else - idno = to_platform_device(dev)->id; - - mutex_lock(&clocks_mutex); - - list_for_each_entry(p, &clocks, list) { - if (p->id == idno && - strcmp(id, p->name) == 0 && - try_module_get(p->owner)) { - clk = p; - break; - } - } - - /* check for the case where a device was supplied, but the - * clock that was being searched for is not device specific */ - - if (IS_ERR(clk)) { - list_for_each_entry(p, &clocks, list) { - if (p->id == -1 && strcmp(id, p->name) == 0 && - try_module_get(p->owner)) { - clk = p; - break; - } - } - } - - mutex_unlock(&clocks_mutex); - return clk; -} - -void clk_put(struct clk *clk) -{ - module_put(clk->owner); -} - -int clk_enable(struct clk *clk) -{ - if (IS_ERR(clk) || clk == NULL) - return -EINVAL; - - clk_enable(clk->parent); - - mutex_lock(&clocks_mutex); - - if ((clk->usage++) == 0) - (clk->enable)(clk, 1); - - mutex_unlock(&clocks_mutex); - return 0; -} - -void clk_disable(struct clk *clk) -{ - if (IS_ERR(clk) || clk == NULL) - return; - - mutex_lock(&clocks_mutex); - - if ((--clk->usage) == 0) - (clk->enable)(clk, 0); - - mutex_unlock(&clocks_mutex); - clk_disable(clk->parent); -} - - -unsigned long clk_get_rate(struct clk *clk) -{ - if (IS_ERR(clk)) - return 0; - - if (clk->rate != 0) - return clk->rate; - - if (clk->get_rate != NULL) - return (clk->get_rate)(clk); - - if (clk->parent != NULL) - return clk_get_rate(clk->parent); - - return clk->rate; -} - -long clk_round_rate(struct clk *clk, unsigned long rate) -{ - if (!IS_ERR(clk) && clk->round_rate) - return (clk->round_rate)(clk, rate); - - return rate; -} - -int clk_set_rate(struct clk *clk, unsigned long rate) -{ - int ret; - - if (IS_ERR(clk)) - return -EINVAL; - - /* We do not default just do a clk->rate = rate as - * the clock may have been made this way by choice. - */ - - WARN_ON(clk->set_rate == NULL); - - if (clk->set_rate == NULL) - return -EINVAL; - - mutex_lock(&clocks_mutex); - ret = (clk->set_rate)(clk, rate); - mutex_unlock(&clocks_mutex); - - return ret; -} - -struct clk *clk_get_parent(struct clk *clk) -{ - return clk->parent; -} - -int clk_set_parent(struct clk *clk, struct clk *parent) -{ - int ret = 0; - - if (IS_ERR(clk)) - return -EINVAL; - - mutex_lock(&clocks_mutex); - - if (clk->set_parent) - ret = (clk->set_parent)(clk, parent); - - mutex_unlock(&clocks_mutex); - - return ret; -} - -EXPORT_SYMBOL(clk_get); -EXPORT_SYMBOL(clk_put); -EXPORT_SYMBOL(clk_enable); -EXPORT_SYMBOL(clk_disable); -EXPORT_SYMBOL(clk_get_rate); -EXPORT_SYMBOL(clk_round_rate); -EXPORT_SYMBOL(clk_set_rate); -EXPORT_SYMBOL(clk_get_parent); -EXPORT_SYMBOL(clk_set_parent); - -/* base clocks */ - -static int clk_default_setrate(struct clk *clk, unsigned long rate) -{ - clk->rate = rate; - return 0; -} - -struct clk clk_xtal = { - .name = "xtal", - .id = -1, - .rate = 0, - .parent = NULL, - .ctrlbit = 0, -}; - -struct clk clk_mpll = { - .name = "mpll", - .id = -1, - .set_rate = clk_default_setrate, -}; - -struct clk clk_upll = { - .name = "upll", - .id = -1, - .parent = NULL, - .ctrlbit = 0, -}; - -struct clk clk_f = { - .name = "fclk", - .id = -1, - .rate = 0, - .parent = &clk_mpll, - .ctrlbit = 0, - .set_rate = clk_default_setrate, -}; - -struct clk clk_h = { - .name = "hclk", - .id = -1, - .rate = 0, - .parent = NULL, - .ctrlbit = 0, - .set_rate = clk_default_setrate, -}; - -struct clk clk_p = { - .name = "pclk", - .id = -1, - .rate = 0, - .parent = NULL, - .ctrlbit = 0, - .set_rate = clk_default_setrate, -}; - -struct clk clk_usb_bus = { - .name = "usb-bus", - .id = -1, - .rate = 0, - .parent = &clk_upll, -}; - -/* clocks that could be registered by external code */ - -static int s3c24xx_dclk_enable(struct clk *clk, int enable) -{ - unsigned long dclkcon = __raw_readl(S3C24XX_DCLKCON); - - if (enable) - dclkcon |= clk->ctrlbit; - else - dclkcon &= ~clk->ctrlbit; - - __raw_writel(dclkcon, S3C24XX_DCLKCON); - - return 0; -} - -static int s3c24xx_dclk_setparent(struct clk *clk, struct clk *parent) -{ - unsigned long dclkcon; - unsigned int uclk; - - if (parent == &clk_upll) - uclk = 1; - else if (parent == &clk_p) - uclk = 0; - else - return -EINVAL; - - clk->parent = parent; - - dclkcon = __raw_readl(S3C24XX_DCLKCON); - - if (clk->ctrlbit == S3C2410_DCLKCON_DCLK0EN) { - if (uclk) - dclkcon |= S3C2410_DCLKCON_DCLK0_UCLK; - else - dclkcon &= ~S3C2410_DCLKCON_DCLK0_UCLK; - } else { - if (uclk) - dclkcon |= S3C2410_DCLKCON_DCLK1_UCLK; - else - dclkcon &= ~S3C2410_DCLKCON_DCLK1_UCLK; - } - - __raw_writel(dclkcon, S3C24XX_DCLKCON); - - return 0; -} - -static unsigned long s3c24xx_calc_div(struct clk *clk, unsigned long rate) -{ - unsigned long div; - - if ((rate == 0) || !clk->parent) - return 0; - - div = clk_get_rate(clk->parent) / rate; - if (div < 2) - div = 2; - else if (div > 16) - div = 16; - - return div; -} - -static unsigned long s3c24xx_round_dclk_rate(struct clk *clk, - unsigned long rate) -{ - unsigned long div = s3c24xx_calc_div(clk, rate); - - if (div == 0) - return 0; - - return clk_get_rate(clk->parent) / div; -} - -static int s3c24xx_set_dclk_rate(struct clk *clk, unsigned long rate) -{ - unsigned long mask, data, div = s3c24xx_calc_div(clk, rate); - - if (div == 0) - return -EINVAL; - - if (clk == &s3c24xx_dclk0) { - mask = S3C2410_DCLKCON_DCLK0_DIV_MASK | - S3C2410_DCLKCON_DCLK0_CMP_MASK; - data = S3C2410_DCLKCON_DCLK0_DIV(div) | - S3C2410_DCLKCON_DCLK0_CMP((div + 1) / 2); - } else if (clk == &s3c24xx_dclk1) { - mask = S3C2410_DCLKCON_DCLK1_DIV_MASK | - S3C2410_DCLKCON_DCLK1_CMP_MASK; - data = S3C2410_DCLKCON_DCLK1_DIV(div) | - S3C2410_DCLKCON_DCLK1_CMP((div + 1) / 2); - } else - return -EINVAL; - - clk->rate = clk_get_rate(clk->parent) / div; - __raw_writel(((__raw_readl(S3C24XX_DCLKCON) & ~mask) | data), - S3C24XX_DCLKCON); - return clk->rate; -} - -static int s3c24xx_clkout_setparent(struct clk *clk, struct clk *parent) -{ - unsigned long mask; - unsigned long source; - - /* calculate the MISCCR setting for the clock */ - - if (parent == &clk_xtal) - source = S3C2410_MISCCR_CLK0_MPLL; - else if (parent == &clk_upll) - source = S3C2410_MISCCR_CLK0_UPLL; - else if (parent == &clk_f) - source = S3C2410_MISCCR_CLK0_FCLK; - else if (parent == &clk_h) - source = S3C2410_MISCCR_CLK0_HCLK; - else if (parent == &clk_p) - source = S3C2410_MISCCR_CLK0_PCLK; - else if (clk == &s3c24xx_clkout0 && parent == &s3c24xx_dclk0) - source = S3C2410_MISCCR_CLK0_DCLK0; - else if (clk == &s3c24xx_clkout1 && parent == &s3c24xx_dclk1) - source = S3C2410_MISCCR_CLK0_DCLK0; - else - return -EINVAL; - - clk->parent = parent; - - if (clk == &s3c24xx_clkout0) - mask = S3C2410_MISCCR_CLK0_MASK; - else { - source <<= 4; - mask = S3C2410_MISCCR_CLK1_MASK; - } - - s3c2410_modify_misccr(mask, source); - return 0; -} - -/* external clock definitions */ - -struct clk s3c24xx_dclk0 = { - .name = "dclk0", - .id = -1, - .ctrlbit = S3C2410_DCLKCON_DCLK0EN, - .enable = s3c24xx_dclk_enable, - .set_parent = s3c24xx_dclk_setparent, - .set_rate = s3c24xx_set_dclk_rate, - .round_rate = s3c24xx_round_dclk_rate, -}; - -struct clk s3c24xx_dclk1 = { - .name = "dclk1", - .id = -1, - .ctrlbit = S3C2410_DCLKCON_DCLK1EN, - .enable = s3c24xx_dclk_enable, - .set_parent = s3c24xx_dclk_setparent, - .set_rate = s3c24xx_set_dclk_rate, - .round_rate = s3c24xx_round_dclk_rate, -}; - -struct clk s3c24xx_clkout0 = { - .name = "clkout0", - .id = -1, - .set_parent = s3c24xx_clkout_setparent, -}; - -struct clk s3c24xx_clkout1 = { - .name = "clkout1", - .id = -1, - .set_parent = s3c24xx_clkout_setparent, -}; - -struct clk s3c24xx_uclk = { - .name = "uclk", - .id = -1, -}; - -/* initialise the clock system */ - -int s3c24xx_register_clock(struct clk *clk) -{ - clk->owner = THIS_MODULE; - - if (clk->enable == NULL) - clk->enable = clk_null_enable; - - /* add to the list of available clocks */ - - mutex_lock(&clocks_mutex); - list_add(&clk->list, &clocks); - mutex_unlock(&clocks_mutex); - - return 0; -} - -int s3c24xx_register_clocks(struct clk **clks, int nr_clks) -{ - int fails = 0; - - for (; nr_clks > 0; nr_clks--, clks++) { - if (s3c24xx_register_clock(*clks) < 0) - fails++; - } - - return fails; -} +#include <plat/pll.h> /* initalise all the clocks */ -int __init s3c24xx_setup_clocks(unsigned long xtal, - unsigned long fclk, - unsigned long hclk, - unsigned long pclk) +void __init_or_cpufreq s3c24xx_setup_clocks(unsigned long fclk, + unsigned long hclk, + unsigned long pclk) { - printk(KERN_INFO "S3C24XX Clocks, (c) 2004 Simtec Electronics\n"); - - /* initialise the main system clocks */ - - clk_xtal.rate = xtal; - clk_upll.rate = s3c2410_get_pll(__raw_readl(S3C2410_UPLLCON), xtal); + clk_upll.rate = s3c24xx_get_pll(__raw_readl(S3C2410_UPLLCON), + clk_xtal.rate); clk_mpll.rate = fclk; clk_h.rate = hclk; clk_p.rate = pclk; clk_f.rate = fclk; - - /* assume uart clocks are correctly setup */ - - /* register our clocks */ - - if (s3c24xx_register_clock(&clk_xtal) < 0) - printk(KERN_ERR "failed to register master xtal\n"); - - if (s3c24xx_register_clock(&clk_mpll) < 0) - printk(KERN_ERR "failed to register mpll clock\n"); - - if (s3c24xx_register_clock(&clk_upll) < 0) - printk(KERN_ERR "failed to register upll clock\n"); - - if (s3c24xx_register_clock(&clk_f) < 0) - printk(KERN_ERR "failed to register cpu fclk\n"); - - if (s3c24xx_register_clock(&clk_h) < 0) - printk(KERN_ERR "failed to register cpu hclk\n"); - - if (s3c24xx_register_clock(&clk_p) < 0) - printk(KERN_ERR "failed to register cpu pclk\n"); - - return 0; } diff --git a/arch/arm/plat-s3c24xx/common-smdk.c b/arch/arm/plat-s3c24xx/common-smdk.c index 3098736c65d..3d4837021ac 100644 --- a/arch/arm/plat-s3c24xx/common-smdk.c +++ b/arch/arm/plat-s3c24xx/common-smdk.c @@ -38,7 +38,7 @@ #include <mach/regs-gpio.h> #include <mach/leds-gpio.h> -#include <asm/plat-s3c/nand.h> +#include <plat/nand.h> #include <plat/common-smdk.h> #include <plat/devs.h> diff --git a/arch/arm/plat-s3c24xx/cpu.c b/arch/arm/plat-s3c24xx/cpu.c index 22a329513c0..7a0f494c93b 100644 --- a/arch/arm/plat-s3c24xx/cpu.c +++ b/arch/arm/plat-s3c24xx/cpu.c @@ -55,16 +55,6 @@ #include <plat/s3c2442.h> #include <plat/s3c2443.h> -struct cpu_table { - unsigned long idcode; - unsigned long idmask; - void (*map_io)(struct map_desc *mach_desc, int size); - void (*init_uarts)(struct s3c2410_uartcfg *cfg, int no); - void (*init_clocks)(int xtal); - int (*init)(void); - const char *name; -}; - /* table of supported CPUs */ static const char name_s3c2400[] = "S3C2400"; @@ -169,23 +159,7 @@ static struct map_desc s3c_iodesc[] __initdata = { IODESC_ENT(UART) }; -static struct cpu_table * __init s3c_lookup_cpu(unsigned long idcode) -{ - struct cpu_table *tab; - int count; - - tab = cpu_ids; - for (count = 0; count < ARRAY_SIZE(cpu_ids); count++, tab++) { - if ((idcode & tab->idmask) == tab->idcode) - return tab; - } - - return NULL; -} - -/* cpu information */ - -static struct cpu_table *cpu; +/* read cpu identificaiton code */ static unsigned long s3c24xx_read_idcode_v5(void) { @@ -231,6 +205,7 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) unsigned long idcode = 0x0; /* initialise the io descriptors we need for initialisation */ + iotable_init(mach_desc, size); iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); if (cpu_architecture() >= CPU_ARCH_ARMv5) { @@ -239,117 +214,7 @@ void __init s3c24xx_init_io(struct map_desc *mach_desc, int size) idcode = s3c24xx_read_idcode_v4(); } - cpu = s3c_lookup_cpu(idcode); - - if (cpu == NULL) { - printk(KERN_ERR "Unknown CPU type 0x%08lx\n", idcode); - panic("Unknown S3C24XX CPU"); - } - - printk("CPU %s (id 0x%08lx)\n", cpu->name, idcode); - - if (cpu->map_io == NULL || cpu->init == NULL) { - printk(KERN_ERR "CPU %s support not enabled\n", cpu->name); - panic("Unsupported S3C24XX CPU"); - } - arm_pm_restart = s3c24xx_pm_restart; - (cpu->map_io)(mach_desc, size); -} - -/* s3c24xx_init_clocks - * - * Initialise the clock subsystem and associated information from the - * given master crystal value. - * - * xtal = 0 -> use default PLL crystal value (normally 12MHz) - * != 0 -> PLL crystal value in Hz -*/ - -void __init s3c24xx_init_clocks(int xtal) -{ - if (xtal == 0) - xtal = 12*1000*1000; - - if (cpu == NULL) - panic("s3c24xx_init_clocks: no cpu setup?\n"); - - if (cpu->init_clocks == NULL) - panic("s3c24xx_init_clocks: cpu has no clock init\n"); - else - (cpu->init_clocks)(xtal); -} - -/* uart management */ - -static int nr_uarts __initdata = 0; - -static struct s3c2410_uartcfg uart_cfgs[3]; - -/* s3c24xx_init_uartdevs - * - * copy the specified platform data and configuration into our central - * set of devices, before the data is thrown away after the init process. - * - * This also fills in the array passed to the serial driver for the - * early initialisation of the console. -*/ - -void __init s3c24xx_init_uartdevs(char *name, - struct s3c24xx_uart_resources *res, - struct s3c2410_uartcfg *cfg, int no) -{ - struct platform_device *platdev; - struct s3c2410_uartcfg *cfgptr = uart_cfgs; - struct s3c24xx_uart_resources *resp; - int uart; - - memcpy(cfgptr, cfg, sizeof(struct s3c2410_uartcfg) * no); - - for (uart = 0; uart < no; uart++, cfg++, cfgptr++) { - platdev = s3c24xx_uart_src[cfgptr->hwport]; - - resp = res + cfgptr->hwport; - - s3c24xx_uart_devs[uart] = platdev; - - platdev->name = name; - platdev->resource = resp->resources; - platdev->num_resources = resp->nr_resources; - - platdev->dev.platform_data = cfgptr; - } - - nr_uarts = no; + s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); } - -void __init s3c24xx_init_uarts(struct s3c2410_uartcfg *cfg, int no) -{ - if (cpu == NULL) - return; - - if (cpu->init_uarts == NULL) { - printk(KERN_ERR "s3c24xx_init_uarts: cpu has no uart init\n"); - } else - (cpu->init_uarts)(cfg, no); -} - -static int __init s3c_arch_init(void) -{ - int ret; - - // do the correct init for cpu - - if (cpu == NULL) - panic("s3c_arch_init: NULL cpu\n"); - - ret = (cpu->init)(); - if (ret != 0) - return ret; - - ret = platform_add_devices(s3c24xx_uart_devs, nr_uarts); - return ret; -} - -arch_initcall(s3c_arch_init); diff --git a/arch/arm/plat-s3c24xx/devs.c b/arch/arm/plat-s3c24xx/devs.c index e93f8bf6d33..3cb07b6a0e4 100644 --- a/arch/arm/plat-s3c24xx/devs.c +++ b/arch/arm/plat-s3c24xx/devs.c @@ -29,11 +29,11 @@ #include <asm/irq.h> #include <plat/regs-serial.h> -#include <asm/plat-s3c24xx/udc.h> +#include <plat/udc.h> #include <plat/devs.h> #include <plat/cpu.h> -#include <asm/plat-s3c24xx/regs-spi.h> +#include <plat/regs-spi.h> /* Serial port registrations */ @@ -192,8 +192,8 @@ void __init s3c24xx_fb_set_platdata(struct s3c2410fb_mach_info *pd) static struct resource s3c_nand_resource[] = { [0] = { - .start = S3C2410_PA_NAND, - .end = S3C2410_PA_NAND + S3C24XX_SZ_NAND - 1, + .start = S3C24XX_PA_NAND, + .end = S3C24XX_PA_NAND + S3C24XX_SZ_NAND - 1, .flags = IORESOURCE_MEM, } }; @@ -271,31 +271,6 @@ struct platform_device s3c_device_wdt = { EXPORT_SYMBOL(s3c_device_wdt); -/* I2C */ - -static struct resource s3c_i2c_resource[] = { - [0] = { - .start = S3C24XX_PA_IIC, - .end = S3C24XX_PA_IIC + S3C24XX_SZ_IIC - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_IIC, - .end = IRQ_IIC, - .flags = IORESOURCE_IRQ, - } - -}; - -struct platform_device s3c_device_i2c = { - .name = "s3c2410-i2c", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_i2c_resource), - .resource = s3c_i2c_resource, -}; - -EXPORT_SYMBOL(s3c_device_i2c); - /* IIS */ static struct resource s3c_iis_resource[] = { @@ -382,8 +357,8 @@ struct platform_device s3c_device_adc = { static struct resource s3c_sdi_resource[] = { [0] = { - .start = S3C2410_PA_SDI, - .end = S3C2410_PA_SDI + S3C24XX_SZ_SDI - 1, + .start = S3C24XX_PA_SDI, + .end = S3C24XX_PA_SDI + S3C24XX_SZ_SDI - 1, .flags = IORESOURCE_MEM, }, [1] = { @@ -403,36 +378,6 @@ struct platform_device s3c_device_sdi = { EXPORT_SYMBOL(s3c_device_sdi); -/* High-speed MMC/SD */ - -static struct resource s3c_hsmmc_resource[] = { - [0] = { - .start = S3C2443_PA_HSMMC, - .end = S3C2443_PA_HSMMC + S3C2443_SZ_HSMMC - 1, - .flags = IORESOURCE_MEM, - }, - [1] = { - .start = IRQ_S3C2443_HSMMC, - .end = IRQ_S3C2443_HSMMC, - .flags = IORESOURCE_IRQ, - } -}; - -static u64 s3c_device_hsmmc_dmamask = 0xffffffffUL; - -struct platform_device s3c_device_hsmmc = { - .name = "s3c-sdhci", - .id = -1, - .num_resources = ARRAY_SIZE(s3c_hsmmc_resource), - .resource = s3c_hsmmc_resource, - .dev = { - .dma_mask = &s3c_device_hsmmc_dmamask, - .coherent_dma_mask = 0xffffffffUL - } -}; - - - /* SPI (0) */ static struct resource s3c_spi0_resource[] = { diff --git a/arch/arm/plat-s3c24xx/gpiolib.c b/arch/arm/plat-s3c24xx/gpiolib.c index 3caec6bad3e..f95c6c9d9f1 100644 --- a/arch/arm/plat-s3c24xx/gpiolib.c +++ b/arch/arm/plat-s3c24xx/gpiolib.c @@ -19,104 +19,12 @@ #include <linux/io.h> #include <linux/gpio.h> +#include <plat/gpio-core.h> #include <mach/hardware.h> #include <asm/irq.h> #include <mach/regs-gpio.h> -struct s3c24xx_gpio_chip { - struct gpio_chip chip; - void __iomem *base; -}; - -static inline struct s3c24xx_gpio_chip *to_s3c_chip(struct gpio_chip *gpc) -{ - return container_of(gpc, struct s3c24xx_gpio_chip, chip); -} - -/* these routines are exported for use by other parts of the platform - * and system support, but are not intended to be used directly by the - * drivers themsevles. - */ - -static int s3c24xx_gpiolib_input(struct gpio_chip *chip, unsigned offset) -{ - struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long con; - - local_irq_save(flags); - - con = __raw_readl(base + 0x00); - con &= ~(3 << (offset * 2)); - con |= (S3C2410_GPIO_OUTPUT & 0xf) << (offset * 2); - - __raw_writel(con, base + 0x00); - - local_irq_restore(flags); - return 0; -} - -static int s3c24xx_gpiolib_output(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long dat; - unsigned long con; - - local_irq_save(flags); - - dat = __raw_readl(base + 0x04); - dat &= ~(1 << offset); - if (value) - dat |= 1 << offset; - __raw_writel(dat, base + 0x04); - - con = __raw_readl(base + 0x00); - con &= ~(3 << (offset * 2)); - con |= (S3C2410_GPIO_OUTPUT & 0xf) << (offset * 2); - - __raw_writel(con, base + 0x00); - __raw_writel(dat, base + 0x04); - - local_irq_restore(flags); - return 0; -} - -static void s3c24xx_gpiolib_set(struct gpio_chip *chip, - unsigned offset, int value) -{ - struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip); - void __iomem *base = ourchip->base; - unsigned long flags; - unsigned long dat; - - local_irq_save(flags); - - dat = __raw_readl(base + 0x04); - dat &= ~(1 << offset); - if (value) - dat |= 1 << offset; - __raw_writel(dat, base + 0x04); - - local_irq_restore(flags); -} - -static int s3c24xx_gpiolib_get(struct gpio_chip *chip, unsigned offset) -{ - struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip); - unsigned long val; - - val = __raw_readl(ourchip->base + 0x04); - val >>= offset; - val &= 1; - - return val; -} - static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset) { return -EINVAL; @@ -125,7 +33,7 @@ static int s3c24xx_gpiolib_banka_input(struct gpio_chip *chip, unsigned offset) static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip, unsigned offset, int value) { - struct s3c24xx_gpio_chip *ourchip = to_s3c_chip(chip); + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); void __iomem *base = ourchip->base; unsigned long flags; unsigned long dat; @@ -151,7 +59,7 @@ static int s3c24xx_gpiolib_banka_output(struct gpio_chip *chip, return 0; } -static struct s3c24xx_gpio_chip gpios[] = { +struct s3c_gpio_chip s3c24xx_gpios[] = { [0] = { .base = S3C24XX_GPIO_BASE(S3C2410_GPA0), .chip = { @@ -161,8 +69,6 @@ static struct s3c24xx_gpio_chip gpios[] = { .ngpio = 24, .direction_input = s3c24xx_gpiolib_banka_input, .direction_output = s3c24xx_gpiolib_banka_output, - .set = s3c24xx_gpiolib_set, - .get = s3c24xx_gpiolib_get, }, }, [1] = { @@ -172,10 +78,6 @@ static struct s3c24xx_gpio_chip gpios[] = { .owner = THIS_MODULE, .label = "GPIOB", .ngpio = 16, - .direction_input = s3c24xx_gpiolib_input, - .direction_output = s3c24xx_gpiolib_output, - .set = s3c24xx_gpiolib_set, - .get = s3c24xx_gpiolib_get, }, }, [2] = { @@ -185,10 +87,6 @@ static struct s3c24xx_gpio_chip gpios[] = { .owner = THIS_MODULE, .label = "GPIOC", .ngpio = 16, - .direction_input = s3c24xx_gpiolib_input, - .direction_output = s3c24xx_gpiolib_output, - .set = s3c24xx_gpiolib_set, - .get = s3c24xx_gpiolib_get, }, }, [3] = { @@ -198,10 +96,6 @@ static struct s3c24xx_gpio_chip gpios[] = { .owner = THIS_MODULE, .label = "GPIOD", .ngpio = 16, - .direction_input = s3c24xx_gpiolib_input, - .direction_output = s3c24xx_gpiolib_output, - .set = s3c24xx_gpiolib_set, - .get = s3c24xx_gpiolib_get, }, }, [4] = { @@ -211,10 +105,6 @@ static struct s3c24xx_gpio_chip gpios[] = { .label = "GPIOE", .owner = THIS_MODULE, .ngpio = 16, - .direction_input = s3c24xx_gpiolib_input, - .direction_output = s3c24xx_gpiolib_output, - .set = s3c24xx_gpiolib_set, - .get = s3c24xx_gpiolib_get, }, }, [5] = { @@ -224,10 +114,6 @@ static struct s3c24xx_gpio_chip gpios[] = { .owner = THIS_MODULE, .label = "GPIOF", .ngpio = 8, - .direction_input = s3c24xx_gpiolib_input, - .direction_output = s3c24xx_gpiolib_output, - .set = s3c24xx_gpiolib_set, - .get = s3c24xx_gpiolib_get, }, }, [6] = { @@ -237,21 +123,17 @@ static struct s3c24xx_gpio_chip gpios[] = { .owner = THIS_MODULE, .label = "GPIOG", .ngpio = 10, - .direction_input = s3c24xx_gpiolib_input, - .direction_output = s3c24xx_gpiolib_output, - .set = s3c24xx_gpiolib_set, - .get = s3c24xx_gpiolib_get, }, }, }; static __init int s3c24xx_gpiolib_init(void) { - struct s3c24xx_gpio_chip *chip = gpios; + struct s3c_gpio_chip *chip = s3c24xx_gpios; int gpn; - for (gpn = 0; gpn < ARRAY_SIZE(gpios); gpn++, chip++) - gpiochip_add(&chip->chip); + for (gpn = 0; gpn < ARRAY_SIZE(s3c24xx_gpios); gpn++, chip++) + s3c_gpiolib_add(chip); return 0; } diff --git a/arch/arm/plat-s3c24xx/include/plat/map.h b/arch/arm/plat-s3c24xx/include/plat/map.h new file mode 100644 index 00000000000..fef8ea8b8e1 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/map.h @@ -0,0 +1,99 @@ +/* linux/include/asm-arm/plat-s3c24xx/map.h + * + * Copyright (c) 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX - Memory map definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __ASM_PLAT_S3C24XX_MAP_H +#define __ASM_PLAT_S3C24XX_MAP_H + +/* interrupt controller is the first thing we put in, to make + * the assembly code for the irq detection easier + */ +#define S3C24XX_VA_IRQ S3C_VA_IRQ +#define S3C2410_PA_IRQ (0x4A000000) +#define S3C24XX_SZ_IRQ SZ_1M + +/* memory controller registers */ +#define S3C24XX_VA_MEMCTRL S3C_VA_MEM +#define S3C2410_PA_MEMCTRL (0x48000000) +#define S3C24XX_SZ_MEMCTRL SZ_1M + +/* UARTs */ +#define S3C24XX_VA_UART S3C_VA_UART +#define S3C2410_PA_UART (0x50000000) +#define S3C24XX_SZ_UART SZ_1M +#define S3C_UART_OFFSET (0x4000) + +/* Timers */ +#define S3C24XX_VA_TIMER S3C_VA_TIMER +#define S3C2410_PA_TIMER (0x51000000) +#define S3C24XX_SZ_TIMER SZ_1M + +/* Clock and Power management */ +#define S3C24XX_VA_CLKPWR S3C_VA_SYS +#define S3C24XX_SZ_CLKPWR SZ_1M + +/* USB Device port */ +#define S3C2410_PA_USBDEV (0x52000000) +#define S3C24XX_SZ_USBDEV SZ_1M + +/* Watchdog */ +#define S3C24XX_VA_WATCHDOG S3C_VA_WATCHDOG +#define S3C2410_PA_WATCHDOG (0x53000000) +#define S3C24XX_SZ_WATCHDOG SZ_1M + +/* Standard size definitions for peripheral blocks. */ + +#define S3C24XX_SZ_IIS SZ_1M +#define S3C24XX_SZ_ADC SZ_1M +#define S3C24XX_SZ_SPI SZ_1M +#define S3C24XX_SZ_SDI SZ_1M +#define S3C24XX_SZ_NAND SZ_1M +#define S3C24XX_SZ_USBHOST SZ_1M + +/* GPIO ports */ + +/* the calculation for the VA of this must ensure that + * it is the same distance apart from the UART in the + * phsyical address space, as the initial mapping for the IO + * is done as a 1:1 maping. This puts it (currently) at + * 0xFA800000, which is not in the way of any current mapping + * by the base system. +*/ + +#define S3C2410_PA_GPIO (0x56000000) +#define S3C24XX_VA_GPIO ((S3C24XX_PA_GPIO - S3C24XX_PA_UART) + S3C24XX_VA_UART) +#define S3C24XX_SZ_GPIO SZ_1M + + +/* ISA style IO, for each machine to sort out mappings for, if it + * implements it. We reserve two 16M regions for ISA. + */ + +#define S3C24XX_VA_ISA_WORD S3C2410_ADDR(0x02000000) +#define S3C24XX_VA_ISA_BYTE S3C2410_ADDR(0x03000000) + +/* deal with the registers that move under the 2412/2413 */ + +#if defined(CONFIG_CPU_S3C2412) || defined(CONFIG_CPU_S3C2413) +#ifndef __ASSEMBLY__ +extern void __iomem *s3c24xx_va_gpio2; +#endif +#ifdef CONFIG_CPU_S3C2412_ONLY +#define S3C24XX_VA_GPIO2 (S3C24XX_VA_GPIO + 0x10) +#else +#define S3C24XX_VA_GPIO2 s3c24xx_va_gpio2 +#endif +#else +#define s3c24xx_va_gpio2 S3C24XX_VA_GPIO +#define S3C24XX_VA_GPIO2 S3C24XX_VA_GPIO +#endif + +#endif /* __ASM_PLAT_S3C24XX_MAP_H */ diff --git a/include/asm-arm/plat-s3c24xx/mci.h b/arch/arm/plat-s3c24xx/include/plat/mci.h index 2d0852ac3b2..2d0852ac3b2 100644 --- a/include/asm-arm/plat-s3c24xx/mci.h +++ b/arch/arm/plat-s3c24xx/include/plat/mci.h diff --git a/arch/arm/plat-s3c24xx/include/plat/pll.h b/arch/arm/plat-s3c24xx/include/plat/pll.h new file mode 100644 index 00000000000..7ea8bffa7a9 --- /dev/null +++ b/arch/arm/plat-s3c24xx/include/plat/pll.h @@ -0,0 +1,37 @@ +/* linux/arch/arm/plat-s3c24xx/include/plat/pll.h + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C24xx - common pll registers and code + */ + +#define S3C24XX_PLLCON_MDIVSHIFT 12 +#define S3C24XX_PLLCON_PDIVSHIFT 4 +#define S3C24XX_PLLCON_SDIVSHIFT 0 +#define S3C24XX_PLLCON_MDIVMASK ((1<<(1+(19-12)))-1) +#define S3C24XX_PLLCON_PDIVMASK ((1<<5)-1) +#define S3C24XX_PLLCON_SDIVMASK 3 + +#include <asm/div64.h> + +static inline unsigned int +s3c24xx_get_pll(unsigned int pllval, unsigned int baseclk) +{ + unsigned int mdiv, pdiv, sdiv; + uint64_t fvco; + + mdiv = pllval >> S3C24XX_PLLCON_MDIVSHIFT; + pdiv = pllval >> S3C24XX_PLLCON_PDIVSHIFT; + sdiv = pllval >> S3C24XX_PLLCON_SDIVSHIFT; + + mdiv &= S3C24XX_PLLCON_MDIVMASK; + pdiv &= S3C24XX_PLLCON_PDIVMASK; + sdiv &= S3C24XX_PLLCON_SDIVMASK; + + fvco = (uint64_t)baseclk * (mdiv + 8); + do_div(fvco, (pdiv + 2) << sdiv); + + return (unsigned int)fvco; +} diff --git a/include/asm-arm/plat-s3c24xx/regs-spi.h b/arch/arm/plat-s3c24xx/include/plat/regs-spi.h index 2b35479ee35..2b35479ee35 100644 --- a/include/asm-arm/plat-s3c24xx/regs-spi.h +++ b/arch/arm/plat-s3c24xx/include/plat/regs-spi.h diff --git a/include/asm-arm/plat-s3c24xx/regs-udc.h b/arch/arm/plat-s3c24xx/include/plat/regs-udc.h index f0dd4a41b37..f0dd4a41b37 100644 --- a/include/asm-arm/plat-s3c24xx/regs-udc.h +++ b/arch/arm/plat-s3c24xx/include/plat/regs-udc.h diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h index 3a5a16821af..b3feaea5c70 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2400.h +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2400.h @@ -17,7 +17,7 @@ extern int s3c2400_init(void); -extern void s3c2400_map_io(struct map_desc *mach_desc, int size); +extern void s3c2400_map_io(void); extern void s3c2400_init_uarts(struct s3c2410_uartcfg *cfg, int no); diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h index 3cd1ec677b3..a9ac9e29759 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2410.h +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2410.h @@ -15,7 +15,7 @@ extern int s3c2410_init(void); -extern void s3c2410_map_io(struct map_desc *mach_desc, int size); +extern void s3c2410_map_io(void); extern void s3c2410_init_uarts(struct s3c2410_uartcfg *cfg, int no); diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h b/arch/arm/plat-s3c24xx/include/plat/s3c2412.h index 3ec97685e78..bb15d3b68be 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2412.h +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2412.h @@ -14,7 +14,7 @@ extern int s3c2412_init(void); -extern void s3c2412_map_io(struct map_desc *mach_desc, int size); +extern void s3c2412_map_io(void); extern void s3c2412_init_uarts(struct s3c2410_uartcfg *cfg, int no); diff --git a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h index 11d83b5c84e..815b107ed89 100644 --- a/arch/arm/plat-s3c24xx/include/plat/s3c2443.h +++ b/arch/arm/plat-s3c24xx/include/plat/s3c2443.h @@ -16,7 +16,7 @@ struct s3c2410_uartcfg; extern int s3c2443_init(void); -extern void s3c2443_map_io(struct map_desc *mach_desc, int size); +extern void s3c2443_map_io(void); extern void s3c2443_init_uarts(struct s3c2410_uartcfg *cfg, int no); diff --git a/include/asm-arm/plat-s3c24xx/udc.h b/arch/arm/plat-s3c24xx/include/plat/udc.h index 546bb4008f4..546bb4008f4 100644 --- a/include/asm-arm/plat-s3c24xx/udc.h +++ b/arch/arm/plat-s3c24xx/include/plat/udc.h diff --git a/arch/arm/plat-s3c24xx/irq.c b/arch/arm/plat-s3c24xx/irq.c index 963f7a4f26f..0192ecdc144 100644 --- a/arch/arm/plat-s3c24xx/irq.c +++ b/arch/arm/plat-s3c24xx/irq.c @@ -62,6 +62,7 @@ #include <asm/mach/irq.h> +#include <plat/regs-irqtype.h> #include <mach/regs-irq.h> #include <mach/regs-gpio.h> diff --git a/arch/arm/plat-s3c24xx/pm.c b/arch/arm/plat-s3c24xx/pm.c index 8efb57ad501..bc37cf49f97 100644 --- a/arch/arm/plat-s3c24xx/pm.c +++ b/arch/arm/plat-s3c24xx/pm.c @@ -76,11 +76,13 @@ static struct sleep_save core_save[] = { SAVE_ITEM(S3C2410_BANKCON4), SAVE_ITEM(S3C2410_BANKCON5), +#ifndef CONFIG_CPU_FREQ SAVE_ITEM(S3C2410_CLKDIVN), SAVE_ITEM(S3C2410_MPLLCON), + SAVE_ITEM(S3C2410_REFRESH), +#endif SAVE_ITEM(S3C2410_UPLLCON), SAVE_ITEM(S3C2410_CLKSLOW), - SAVE_ITEM(S3C2410_REFRESH), }; static struct gpio_sleep { diff --git a/arch/arm/mach-s3c2410/clock.c b/arch/arm/plat-s3c24xx/s3c2410-clock.c index 4e07943c1e2..4e07943c1e2 100644 --- a/arch/arm/mach-s3c2410/clock.c +++ b/arch/arm/plat-s3c24xx/s3c2410-clock.c diff --git a/arch/arm/plat-s3c24xx/s3c244x-clock.c b/arch/arm/plat-s3c24xx/s3c244x-clock.c index 7c09773ff9f..dde41f171af 100644 --- a/arch/arm/plat-s3c24xx/s3c244x-clock.c +++ b/arch/arm/plat-s3c24xx/s3c244x-clock.c @@ -31,7 +31,6 @@ #include <linux/sysdev.h> #include <linux/interrupt.h> #include <linux/ioport.h> -#include <linux/mutex.h> #include <linux/clk.h> #include <linux/io.h> @@ -102,13 +101,13 @@ static int s3c244x_clk_add(struct sys_device *sysdev) if (clk_get_rate(clock_upll) > (94 * MHZ)) { clk_usb_bus.rate = clk_get_rate(clock_upll) / 2; - mutex_lock(&clocks_mutex); + spin_lock(&clocks_lock); clkdivn = __raw_readl(S3C2410_CLKDIVN); clkdivn |= S3C2440_CLKDIVN_UCLK; __raw_writel(clkdivn, S3C2410_CLKDIVN); - mutex_unlock(&clocks_mutex); + spin_unlock(&clocks_lock); } return 0; diff --git a/arch/arm/plat-s3c24xx/s3c244x.c b/arch/arm/plat-s3c24xx/s3c244x.c index c0344fac4a9..c1de6bb0101 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.c +++ b/arch/arm/plat-s3c24xx/s3c244x.c @@ -29,6 +29,8 @@ #include <mach/hardware.h> #include <asm/irq.h> +#include <plat/cpu-freq.h> + #include <mach/regs-clock.h> #include <plat/regs-serial.h> #include <mach/regs-gpio.h> @@ -42,6 +44,7 @@ #include <plat/devs.h> #include <plat/cpu.h> #include <plat/pm.h> +#include <plat/pll.h> static struct map_desc s3c244x_iodesc[] __initdata = { IODESC_ENT(CLKPWR), @@ -56,32 +59,34 @@ void __init s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no) s3c24xx_init_uartdevs("s3c2440-uart", s3c2410_uart_resources, cfg, no); } -void __init s3c244x_map_io(struct map_desc *mach_desc, int size) +void __init s3c244x_map_io(void) { /* register our io-tables */ iotable_init(s3c244x_iodesc, ARRAY_SIZE(s3c244x_iodesc)); - iotable_init(mach_desc, size); /* rename any peripherals used differing from the s3c2410 */ s3c_device_sdi.name = "s3c2440-sdi"; - s3c_device_i2c.name = "s3c2440-i2c"; + s3c_device_i2c0.name = "s3c2440-i2c"; s3c_device_nand.name = "s3c2440-nand"; s3c_device_usbgadget.name = "s3c2440-usbgadget"; } -void __init s3c244x_init_clocks(int xtal) +void __init_or_cpufreq s3c244x_setup_clocks(void) { + struct clk *xtal_clk; unsigned long clkdiv; unsigned long camdiv; + unsigned long xtal; unsigned long hclk, fclk, pclk; int hdiv = 1; - /* now we've got our machine bits initialised, work out what - * clocks we've got */ + xtal_clk = clk_get(NULL, "xtal"); + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); - fclk = s3c2410_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2; + fclk = s3c24xx_get_pll(__raw_readl(S3C2410_MPLLCON), xtal) * 2; clkdiv = __raw_readl(S3C2410_CLKDIVN); camdiv = __raw_readl(S3C2440_CAMDIVN); @@ -107,18 +112,24 @@ void __init s3c244x_init_clocks(int xtal) } hclk = fclk / hdiv; - pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN)? 2:1); + pclk = hclk / ((clkdiv & S3C2440_CLKDIVN_PDIVN) ? 2 : 1); /* print brief summary of clocks, etc */ printk("S3C244X: core %ld.%03ld MHz, memory %ld.%03ld MHz, peripheral %ld.%03ld MHz\n", print_mhz(fclk), print_mhz(hclk), print_mhz(pclk)); + s3c24xx_setup_clocks(fclk, hclk, pclk); +} + +void __init s3c244x_init_clocks(int xtal) +{ /* initialise the clocks here, to allow other things like the * console to use them, and to add new ones after the initialisation */ - s3c24xx_setup_clocks(xtal, fclk, hclk, pclk); + s3c24xx_register_baseclocks(xtal); + s3c244x_setup_clocks(); s3c2410_baseclk_add(); } diff --git a/arch/arm/plat-s3c24xx/s3c244x.h b/arch/arm/plat-s3c24xx/s3c244x.h index f8ed17676a3..6aab5eaae2b 100644 --- a/arch/arm/plat-s3c24xx/s3c244x.h +++ b/arch/arm/plat-s3c24xx/s3c244x.h @@ -12,7 +12,7 @@ #if defined(CONFIG_CPU_S3C2440) || defined(CONFIG_CPU_S3C2442) -extern void s3c244x_map_io(struct map_desc *mach_desc, int size); +extern void s3c244x_map_io(void); extern void s3c244x_init_uarts(struct s3c2410_uartcfg *cfg, int no); diff --git a/arch/arm/plat-s3c24xx/setup-i2c.c b/arch/arm/plat-s3c24xx/setup-i2c.c new file mode 100644 index 00000000000..d62b7e7fb35 --- /dev/null +++ b/arch/arm/plat-s3c24xx/setup-i2c.c @@ -0,0 +1,25 @@ +/* linux/arch/arm/plat-s3c24xx/setup-i2c.c + * + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX Base setup for i2c device + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> + +struct platform_device; + +#include <plat/iic.h> +#include <mach/hardware.h> +#include <mach/regs-gpio.h> + +void s3c_i2c0_cfg_gpio(struct platform_device *dev) +{ + s3c2410_gpio_cfgpin(S3C2410_GPE15, S3C2410_GPE15_IICSDA); + s3c2410_gpio_cfgpin(S3C2410_GPE14, S3C2410_GPE14_IICSCL); +} diff --git a/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c new file mode 100644 index 00000000000..8b403cbb53d --- /dev/null +++ b/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c @@ -0,0 +1,37 @@ +/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpe11_12_13.c + * + * Copyright (c) 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX SPI - gpio configuration for bus 0 on gpe11,12,13 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. +*/ + +#include <linux/kernel.h> + +#include <mach/hardware.h> + +#include <mach/spi.h> +#include <mach/regs-gpio.h> + +void s3c24xx_spi_gpiocfg_bus0_gpe11_12_13(struct s3c2410_spi_info *spi, + int enable) +{ + if (enable) { + s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPE13_SPICLK0); + s3c2410_gpio_cfgpin(S3C2410_GPE12, S3C2410_GPE12_SPIMOSI0); + s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPE11_SPIMISO0); + s3c2410_gpio_pullup(S3C2410_GPE11, 0); + s3c2410_gpio_pullup(S3C2410_GPE13, 0); + } else { + s3c2410_gpio_cfgpin(S3C2410_GPE13, S3C2410_GPIO_INPUT); + s3c2410_gpio_cfgpin(S3C2410_GPE11, S3C2410_GPIO_INPUT); + s3c2410_gpio_pullup(S3C2410_GPE11, 1); + s3c2410_gpio_pullup(S3C2410_GPE12, 1); + s3c2410_gpio_pullup(S3C2410_GPE13, 1); + } +} diff --git a/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c new file mode 100644 index 00000000000..8fccd4e549f --- /dev/null +++ b/arch/arm/plat-s3c24xx/spi-bus1-gpg5_6_7.c @@ -0,0 +1,37 @@ +/* linux/arch/arm/plat-s3c24xx/spi-bus0-gpg5_6_7.c + * + * Copyright (c) 2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * Ben Dooks <ben@simtec.co.uk> + * + * S3C24XX SPI - gpio configuration for bus 1 on gpg5,6,7 + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License. +*/ + +#include <linux/kernel.h> + +#include <mach/hardware.h> + +#include <mach/spi.h> +#include <mach/regs-gpio.h> + +void s3c24xx_spi_gpiocfg_bus1_gpg5_6_7(struct s3c2410_spi_info *spi, + int enable) +{ + if (enable) { + s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPG7_SPICLK1); + s3c2410_gpio_cfgpin(S3C2410_GPG6, S3C2410_GPG6_SPIMOSI1); + s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPG5_SPIMISO1); + s3c2410_gpio_pullup(S3C2410_GPG5, 0); + s3c2410_gpio_pullup(S3C2410_GPG6, 0); + } else { + s3c2410_gpio_cfgpin(S3C2410_GPG7, S3C2410_GPIO_INPUT); + s3c2410_gpio_cfgpin(S3C2410_GPG5, S3C2410_GPIO_INPUT); + s3c2410_gpio_pullup(S3C2410_GPG5, 1); + s3c2410_gpio_pullup(S3C2410_GPG6, 1); + s3c2410_gpio_pullup(S3C2410_GPG7, 1); + } +} diff --git a/arch/arm/plat-s3c64xx/Kconfig b/arch/arm/plat-s3c64xx/Kconfig new file mode 100644 index 00000000000..9037eb47076 --- /dev/null +++ b/arch/arm/plat-s3c64xx/Kconfig @@ -0,0 +1,56 @@ +# arch/arm/plat-s3c64xx/Kconfig +# +# Copyright 2008 Openmoko, Inc. +# Copyright 2008 Simtec Electronics +# Ben Dooks <ben@simtec.co.uk> +# +# Licensed under GPLv2 + +config PLAT_S3C64XX + bool + depends on ARCH_S3C64XX + select PLAT_S3C + select ARM_VIC + default y + select NO_IOPORT + select ARCH_REQUIRE_GPIOLIB + select S3C_GPIO_TRACK + select S3C_GPIO_PULL_UPDOWN + select S3C_GPIO_CFG_S3C24XX + select S3C_GPIO_CFG_S3C64XX + help + Base platform code for any Samsung S3C64XX device + +if PLAT_S3C64XX + +# Configuration options shared by all S3C64XX implementations + +config CPU_S3C6400_INIT + bool + help + Common initialisation code for the S3C6400 that is shared + by other CPUs in the series, such as the S3C6410. + +config CPU_S3C6400_CLOCK + bool + help + Common clock support code for the S3C6400 that is shared + by other CPUs in the series, such as the S3C6410. + +# platform specific device setup + +config S3C64XX_SETUP_I2C0 + bool + default y + help + Common setup code for i2c bus 0. + + Note, currently since i2c0 is always compiled, this setup helper + is always compiled with it. + +config S3C64XX_SETUP_I2C1 + bool + help + Common setup code for i2c bus 1. + +endif diff --git a/arch/arm/plat-s3c64xx/Makefile b/arch/arm/plat-s3c64xx/Makefile new file mode 100644 index 00000000000..0a0b8c48a3e --- /dev/null +++ b/arch/arm/plat-s3c64xx/Makefile @@ -0,0 +1,30 @@ +# arch/arm/plat-s3c64xx/Makefile +# +# Copyright 2008 Openmoko, Inc. +# Copyright 2008 Simtec Electronics +# +# Licensed under GPLv2 + +obj-y := +obj-m := +obj-n := dummy.o +obj- := + +# Core files + +obj-y += dev-uart.o +obj-y += cpu.o +obj-y += irq.o +obj-y += irq-eint.o +obj-y += clock.o +obj-y += gpiolib.o + +# CPU support + +obj-$(CONFIG_CPU_S3C6400_INIT) += s3c6400-init.o +obj-$(CONFIG_CPU_S3C6400_CLOCK) += s3c6400-clock.o + +# Device setup + +obj-$(CONFIG_S3C64XX_SETUP_I2C0) += setup-i2c0.o +obj-$(CONFIG_S3C64XX_SETUP_I2C1) += setup-i2c1.o diff --git a/arch/arm/plat-s3c64xx/clock.c b/arch/arm/plat-s3c64xx/clock.c new file mode 100644 index 00000000000..523da0cb55c --- /dev/null +++ b/arch/arm/plat-s3c64xx/clock.c @@ -0,0 +1,280 @@ +/* linux/arch/arm/plat-s3c64xx/clock.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX Base clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/delay.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> + +#include <plat/regs-sys.h> +#include <plat/regs-clock.h> +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> + +struct clk clk_27m = { + .name = "clk_27m", + .id = -1, + .rate = 27000000, +}; + +static int clk_48m_ctrl(struct clk *clk, int enable) +{ + unsigned long flags; + u32 val; + + /* can't rely on clock lock, this register has other usages */ + local_irq_save(flags); + + val = __raw_readl(S3C64XX_OTHERS); + if (enable) + val |= S3C64XX_OTHERS_USBMASK; + else + val &= ~S3C64XX_OTHERS_USBMASK; + + __raw_writel(val, S3C64XX_OTHERS); + local_irq_restore(flags); + + return 0; +} + +struct clk clk_48m = { + .name = "clk_48m", + .id = -1, + .rate = 48000000, + .enable = clk_48m_ctrl, +}; + +static int inline s3c64xx_gate(void __iomem *reg, + struct clk *clk, + int enable) +{ + unsigned int ctrlbit = clk->ctrlbit; + u32 con; + + con = __raw_readl(reg); + + if (enable) + con |= ctrlbit; + else + con &= ~ctrlbit; + + __raw_writel(con, reg); + return 0; +} + +static int s3c64xx_pclk_ctrl(struct clk *clk, int enable) +{ + return s3c64xx_gate(S3C_PCLK_GATE, clk, enable); +} + +static int s3c64xx_hclk_ctrl(struct clk *clk, int enable) +{ + return s3c64xx_gate(S3C_HCLK_GATE, clk, enable); +} + +int s3c64xx_sclk_ctrl(struct clk *clk, int enable) +{ + return s3c64xx_gate(S3C_SCLK_GATE, clk, enable); +} + +static struct clk init_clocks_disable[] = { + { + .name = "nand", + .id = -1, + .parent = &clk_h, + }, { + .name = "adc", + .id = -1, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_TSADC, + }, { + .name = "i2c", + .id = -1, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_IIC, + }, { + .name = "iis", + .id = 0, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_IIS0, + }, { + .name = "iis", + .id = 1, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_IIS1, + }, { + .name = "spi", + .id = 0, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_SPI0, + }, { + .name = "spi", + .id = 1, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_SPI1, + }, { + .name = "48m", + .id = 0, + .parent = &clk_48m, + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_MMC0_48, + }, { + .name = "48m", + .id = 1, + .parent = &clk_48m, + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_MMC1_48, + }, { + .name = "48m", + .id = 2, + .parent = &clk_48m, + .enable = s3c64xx_sclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_MMC2_48, + }, +}; + +static struct clk init_clocks[] = { + { + .name = "lcd", + .id = -1, + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_LCD, + }, { + .name = "gpio", + .id = -1, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_GPIO, + }, { + .name = "usb-host", + .id = -1, + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_SCLK_UHOST, + }, { + .name = "hsmmc", + .id = 0, + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_HSMMC0, + }, { + .name = "hsmmc", + .id = 1, + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_HSMMC1, + }, { + .name = "hsmmc", + .id = 2, + .parent = &clk_h, + .enable = s3c64xx_hclk_ctrl, + .ctrlbit = S3C_CLKCON_HCLK_HSMMC2, + }, { + .name = "timers", + .id = -1, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_PWM, + }, { + .name = "uart", + .id = 0, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_UART0, + }, { + .name = "uart", + .id = 1, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_UART1, + }, { + .name = "uart", + .id = 2, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_UART2, + }, { + .name = "uart", + .id = 3, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_UART3, + }, { + .name = "rtc", + .id = -1, + .parent = &clk_p, + .enable = s3c64xx_pclk_ctrl, + .ctrlbit = S3C_CLKCON_PCLK_RTC, + }, { + .name = "watchdog", + .id = -1, + .parent = &clk_p, + .ctrlbit = S3C_CLKCON_PCLK_WDT, + }, { + .name = "ac97", + .id = -1, + .parent = &clk_p, + .ctrlbit = S3C_CLKCON_PCLK_AC97, + } +}; + +static struct clk *clks[] __initdata = { + &clk_ext, + &clk_epll, + &clk_27m, + &clk_48m, +}; + +void s3c64xx_register_clocks(void) +{ + struct clk *clkp; + int ret; + int ptr; + + s3c24xx_register_clocks(clks, ARRAY_SIZE(clks)); + + clkp = init_clocks; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks); ptr++, clkp++) { + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + } + + clkp = init_clocks_disable; + for (ptr = 0; ptr < ARRAY_SIZE(init_clocks_disable); ptr++, clkp++) { + + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + + (clkp->enable)(clkp, 0); + } +} diff --git a/arch/arm/plat-s3c64xx/cpu.c b/arch/arm/plat-s3c64xx/cpu.c new file mode 100644 index 00000000000..36182fcfaeb --- /dev/null +++ b/arch/arm/plat-s3c64xx/cpu.c @@ -0,0 +1,115 @@ +/* linux/arch/arm/plat-s3c64xx/cpu.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX CPU Support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/interrupt.h> +#include <linux/ioport.h> +#include <linux/serial_core.h> +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> + +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <plat/regs-serial.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/clock.h> + +#include <plat/s3c6400.h> +#include <plat/s3c6410.h> + +/* table of supported CPUs */ + +static const char name_s3c6400[] = "S3C6400"; +static const char name_s3c6410[] = "S3C6410"; + +static struct cpu_table cpu_ids[] __initdata = { + { + .idcode = 0x36400000, + .idmask = 0xfffff000, + .map_io = s3c6400_map_io, + .init_clocks = s3c6400_init_clocks, + .init_uarts = s3c6400_init_uarts, + .init = s3c6400_init, + .name = name_s3c6400, + }, { + .idcode = 0x36410100, + .idmask = 0xffffff00, + .map_io = s3c6410_map_io, + .init_clocks = s3c6410_init_clocks, + .init_uarts = s3c6410_init_uarts, + .init = s3c6410_init, + .name = name_s3c6410, + }, +}; + +/* minimal IO mapping */ + +/* see notes on uart map in arch/arm/mach-s3c6400/include/mach/debug-macro.S */ +#define UART_OFFS (S3C_PA_UART & 0xfffff) + +static struct map_desc s3c_iodesc[] __initdata = { + { + .virtual = (unsigned long)S3C_VA_SYS, + .pfn = __phys_to_pfn(S3C64XX_PA_SYSCON), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)(S3C_VA_UART + UART_OFFS), + .pfn = __phys_to_pfn(S3C_PA_UART), + .length = SZ_4K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_VIC0, + .pfn = __phys_to_pfn(S3C64XX_PA_VIC0), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_VIC1, + .pfn = __phys_to_pfn(S3C64XX_PA_VIC1), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C_VA_TIMER, + .pfn = __phys_to_pfn(S3C_PA_TIMER), + .length = SZ_16K, + .type = MT_DEVICE, + }, { + .virtual = (unsigned long)S3C64XX_VA_GPIO, + .pfn = __phys_to_pfn(S3C64XX_PA_GPIO), + .length = SZ_4K, + .type = MT_DEVICE, + }, +}; + +/* read cpu identification code */ + +void __init s3c64xx_init_io(struct map_desc *mach_desc, int size) +{ + unsigned long idcode; + + /* initialise the io descriptors we need for initialisation */ + iotable_init(s3c_iodesc, ARRAY_SIZE(s3c_iodesc)); + iotable_init(mach_desc, size); + + idcode = __raw_readl(S3C_VA_SYS + 0x118); + s3c_init_cpu(idcode, cpu_ids, ARRAY_SIZE(cpu_ids)); +} diff --git a/arch/arm/plat-s3c64xx/dev-uart.c b/arch/arm/plat-s3c64xx/dev-uart.c new file mode 100644 index 00000000000..62c11a6fc7b --- /dev/null +++ b/arch/arm/plat-s3c64xx/dev-uart.c @@ -0,0 +1,176 @@ +/* linux/arch/arm/plat-s3c64xx/dev-uart.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Base S3C64XX UART resource and device definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * +*/ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/interrupt.h> +#include <linux/list.h> +#include <linux/platform_device.h> + +#include <asm/mach/arch.h> +#include <asm/mach/irq.h> +#include <mach/hardware.h> +#include <mach/map.h> + +#include <plat/devs.h> + +/* Serial port registrations */ + +/* 64xx uarts are closer together */ + +static struct resource s3c64xx_uart0_resource[] = { + [0] = { + .start = S3C_PA_UART0, + .end = S3C_PA_UART0 + 0x100, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S3CUART_RX0, + .end = IRQ_S3CUART_RX0, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S3CUART_TX0, + .end = IRQ_S3CUART_TX0, + .flags = IORESOURCE_IRQ, + + }, + [3] = { + .start = IRQ_S3CUART_ERR0, + .end = IRQ_S3CUART_ERR0, + .flags = IORESOURCE_IRQ, + } +}; + +static struct resource s3c64xx_uart1_resource[] = { + [0] = { + .start = S3C_PA_UART1, + .end = S3C_PA_UART1 + 0x100, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S3CUART_RX1, + .end = IRQ_S3CUART_RX1, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S3CUART_TX1, + .end = IRQ_S3CUART_TX1, + .flags = IORESOURCE_IRQ, + + }, + [3] = { + .start = IRQ_S3CUART_ERR1, + .end = IRQ_S3CUART_ERR1, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource s3c6xx_uart2_resource[] = { + [0] = { + .start = S3C_PA_UART2, + .end = S3C_PA_UART2 + 0x100, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S3CUART_RX2, + .end = IRQ_S3CUART_RX2, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S3CUART_TX2, + .end = IRQ_S3CUART_TX2, + .flags = IORESOURCE_IRQ, + + }, + [3] = { + .start = IRQ_S3CUART_ERR2, + .end = IRQ_S3CUART_ERR2, + .flags = IORESOURCE_IRQ, + }, +}; + +static struct resource s3c64xx_uart3_resource[] = { + [0] = { + .start = S3C_PA_UART3, + .end = S3C_PA_UART3 + 0x100, + .flags = IORESOURCE_MEM, + }, + [1] = { + .start = IRQ_S3CUART_RX3, + .end = IRQ_S3CUART_RX3, + .flags = IORESOURCE_IRQ, + }, + [2] = { + .start = IRQ_S3CUART_TX3, + .end = IRQ_S3CUART_TX3, + .flags = IORESOURCE_IRQ, + + }, + [3] = { + .start = IRQ_S3CUART_ERR3, + .end = IRQ_S3CUART_ERR3, + .flags = IORESOURCE_IRQ, + }, +}; + + +struct s3c24xx_uart_resources s3c64xx_uart_resources[] __initdata = { + [0] = { + .resources = s3c64xx_uart0_resource, + .nr_resources = ARRAY_SIZE(s3c64xx_uart0_resource), + }, + [1] = { + .resources = s3c64xx_uart1_resource, + .nr_resources = ARRAY_SIZE(s3c64xx_uart1_resource), + }, + [2] = { + .resources = s3c6xx_uart2_resource, + .nr_resources = ARRAY_SIZE(s3c6xx_uart2_resource), + }, + [3] = { + .resources = s3c64xx_uart3_resource, + .nr_resources = ARRAY_SIZE(s3c64xx_uart3_resource), + }, +}; + +/* uart devices */ + +static struct platform_device s3c24xx_uart_device0 = { + .id = 0, +}; + +static struct platform_device s3c24xx_uart_device1 = { + .id = 1, +}; + +static struct platform_device s3c24xx_uart_device2 = { + .id = 2, +}; + +static struct platform_device s3c24xx_uart_device3 = { + .id = 3, +}; + +struct platform_device *s3c24xx_uart_src[4] = { + &s3c24xx_uart_device0, + &s3c24xx_uart_device1, + &s3c24xx_uart_device2, + &s3c24xx_uart_device3, +}; + +struct platform_device *s3c24xx_uart_devs[4] = { +}; + diff --git a/arch/arm/plat-s3c64xx/gpiolib.c b/arch/arm/plat-s3c64xx/gpiolib.c new file mode 100644 index 00000000000..cc62941d7b5 --- /dev/null +++ b/arch/arm/plat-s3c64xx/gpiolib.c @@ -0,0 +1,420 @@ +/* arch/arm/plat-s3c64xx/gpiolib.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - GPIOlib support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <mach/map.h> +#include <mach/gpio.h> +#include <mach/gpio-core.h> + +#include <plat/gpio-cfg.h> +#include <plat/gpio-cfg-helpers.h> +#include <plat/regs-gpio.h> + +/* GPIO bank summary: + * + * Bank GPIOs Style SlpCon ExtInt Group + * A 8 4Bit Yes 1 + * B 7 4Bit Yes 1 + * C 8 4Bit Yes 2 + * D 5 4Bit Yes 3 + * E 5 4Bit Yes None + * F 16 2Bit Yes 4 [1] + * G 7 4Bit Yes 5 + * H 10 4Bit[2] Yes 6 + * I 16 2Bit Yes None + * J 12 2Bit Yes None + * K 16 4Bit[2] No None + * L 15 4Bit[2] No None + * M 6 4Bit No IRQ_EINT + * N 16 2Bit No IRQ_EINT + * O 16 2Bit Yes 7 + * P 15 2Bit Yes 8 + * Q 9 2Bit Yes 9 + * + * [1] BANKF pins 14,15 do not form part of the external interrupt sources + * [2] BANK has two control registers, GPxCON0 and GPxCON1 + */ + +#define OFF_GPCON (0x00) +#define OFF_GPDAT (0x04) + +#define con_4bit_shift(__off) ((__off) * 4) + +#if 1 +#define gpio_dbg(x...) do { } while(0) +#else +#define gpio_dbg(x...) printk(KERN_DEBUG ## x) +#endif + +/* The s3c64xx_gpiolib_4bit routines are to control the gpio banks where + * the gpio configuration register (GPxCON) has 4 bits per GPIO, as the + * following example: + * + * base + 0x00: Control register, 4 bits per gpio + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Data register, 1 bit per gpio + * bit n: data bit n + * + * Note, since the data register is one bit per gpio and is at base + 0x4 + * we can use s3c_gpiolib_get and s3c_gpiolib_set to change the state of + * the output. +*/ + +static int s3c64xx_gpiolib_4bit_input(struct gpio_chip *chip, unsigned offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + + con = __raw_readl(base + OFF_GPCON); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, base + OFF_GPCON); + + gpio_dbg("%s: %p: CON now %08lx\n", __func__, base, con); + + return 0; +} + +static int s3c64xx_gpiolib_4bit_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + unsigned long con; + unsigned long dat; + + con = __raw_readl(base + OFF_GPCON); + con &= ~(0xf << con_4bit_shift(offset)); + con |= 0x1 << con_4bit_shift(offset); + + dat = __raw_readl(base + OFF_GPDAT); + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + OFF_GPDAT); + __raw_writel(con, base + OFF_GPCON); + __raw_writel(dat, base + OFF_GPDAT); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +/* The next set of routines are for the case where the GPIO configuration + * registers are 4 bits per GPIO but there is more than one register (the + * bank has more than 8 GPIOs. + * + * This case is the similar to the 4 bit case, but the registers are as + * follows: + * + * base + 0x00: Control register, 4 bits per gpio (lower 8 GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x04: Control register, 4 bits per gpio (up to 8 additions GPIOs) + * gpio n: 4 bits starting at (4*n) + * 0000 = input, 0001 = output, others mean special-function + * base + 0x08: Data register, 1 bit per gpio + * bit n: data bit n + * + * To allow us to use the s3c_gpiolib_get and s3c_gpiolib_set routines we + * store the 'base + 0x4' address so that these routines see the data + * register at ourchip->base + 0x04. +*/ + +static int s3c64xx_gpiolib_4bit2_input(struct gpio_chip *chip, unsigned offset) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + + if (offset > 7) + offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(offset)); + __raw_writel(con, regcon); + + gpio_dbg("%s: %p: CON %08lx\n", __func__, base, con); + + return 0; + +} + +static int s3c64xx_gpiolib_4bit2_output(struct gpio_chip *chip, + unsigned offset, int value) +{ + struct s3c_gpio_chip *ourchip = to_s3c_gpio(chip); + void __iomem *base = ourchip->base; + void __iomem *regcon = base; + unsigned long con; + unsigned long dat; + + if (offset > 7) + offset -= 8; + else + regcon -= 4; + + con = __raw_readl(regcon); + con &= ~(0xf << con_4bit_shift(offset)); + con |= 0x1 << con_4bit_shift(offset); + + dat = __raw_readl(base + OFF_GPDAT); + if (value) + dat |= 1 << offset; + else + dat &= ~(1 << offset); + + __raw_writel(dat, base + OFF_GPDAT); + __raw_writel(con, regcon); + __raw_writel(dat, base + OFF_GPDAT); + + gpio_dbg("%s: %p: CON %08lx, DAT %08lx\n", __func__, base, con, dat); + + return 0; +} + +static struct s3c_gpio_cfg gpio_4bit_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_4bit_cfg_eint0111 = { + .cfg_eint = 7, + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_4bit_cfg_eint0011 = { + .cfg_eint = 3, + .set_config = s3c_gpio_setcfg_s3c64xx_4bit, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_chip gpio_4bit[] = { + { + .base = S3C64XX_GPA_BASE, + .config = &gpio_4bit_cfg_eint0111, + .chip = { + .base = S3C64XX_GPA(0), + .ngpio = S3C64XX_GPIO_A_NR, + .label = "GPA", + }, + }, { + .base = S3C64XX_GPB_BASE, + .config = &gpio_4bit_cfg_eint0111, + .chip = { + .base = S3C64XX_GPB(0), + .ngpio = S3C64XX_GPIO_B_NR, + .label = "GPB", + }, + }, { + .base = S3C64XX_GPC_BASE, + .config = &gpio_4bit_cfg_eint0111, + .chip = { + .base = S3C64XX_GPC(0), + .ngpio = S3C64XX_GPIO_C_NR, + .label = "GPC", + }, + }, { + .base = S3C64XX_GPD_BASE, + .config = &gpio_4bit_cfg_eint0111, + .chip = { + .base = S3C64XX_GPD(0), + .ngpio = S3C64XX_GPIO_D_NR, + .label = "GPD", + }, + }, { + .base = S3C64XX_GPE_BASE, + .config = &gpio_4bit_cfg_noint, + .chip = { + .base = S3C64XX_GPE(0), + .ngpio = S3C64XX_GPIO_E_NR, + .label = "GPE", + }, + }, { + .base = S3C64XX_GPG_BASE, + .config = &gpio_4bit_cfg_eint0111, + .chip = { + .base = S3C64XX_GPG(0), + .ngpio = S3C64XX_GPIO_G_NR, + .label = "GPG", + }, + }, { + .base = S3C64XX_GPM_BASE, + .config = &gpio_4bit_cfg_eint0011, + .chip = { + .base = S3C64XX_GPM(0), + .ngpio = S3C64XX_GPIO_M_NR, + .label = "GPM", + }, + }, +}; + +static struct s3c_gpio_chip gpio_4bit2[] = { + { + .base = S3C64XX_GPH_BASE + 0x4, + .config = &gpio_4bit_cfg_eint0111, + .chip = { + .base = S3C64XX_GPH(0), + .ngpio = S3C64XX_GPIO_H_NR, + .label = "GPH", + }, + }, { + .base = S3C64XX_GPK_BASE + 0x4, + .config = &gpio_4bit_cfg_noint, + .chip = { + .base = S3C64XX_GPK(0), + .ngpio = S3C64XX_GPIO_K_NR, + .label = "GPK", + }, + }, { + .base = S3C64XX_GPL_BASE + 0x4, + .config = &gpio_4bit_cfg_eint0011, + .chip = { + .base = S3C64XX_GPL(0), + .ngpio = S3C64XX_GPIO_L_NR, + .label = "GPL", + }, + }, +}; + +static struct s3c_gpio_cfg gpio_2bit_cfg_noint = { + .set_config = s3c_gpio_setcfg_s3c24xx, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_2bit_cfg_eint10 = { + .cfg_eint = 2, + .set_config = s3c_gpio_setcfg_s3c24xx, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_cfg gpio_2bit_cfg_eint11 = { + .cfg_eint = 3, + .set_config = s3c_gpio_setcfg_s3c24xx, + .set_pull = s3c_gpio_setpull_updown, + .get_pull = s3c_gpio_getpull_updown, +}; + +static struct s3c_gpio_chip gpio_2bit[] = { + { + .base = S3C64XX_GPF_BASE, + .config = &gpio_2bit_cfg_eint11, + .chip = { + .base = S3C64XX_GPF(0), + .ngpio = S3C64XX_GPIO_F_NR, + .label = "GPF", + }, + }, { + .base = S3C64XX_GPI_BASE, + .config = &gpio_2bit_cfg_noint, + .chip = { + .base = S3C64XX_GPI(0), + .ngpio = S3C64XX_GPIO_I_NR, + .label = "GPI", + }, + }, { + .base = S3C64XX_GPJ_BASE, + .config = &gpio_2bit_cfg_noint, + .chip = { + .base = S3C64XX_GPJ(0), + .ngpio = S3C64XX_GPIO_J_NR, + .label = "GPJ", + }, + }, { + .base = S3C64XX_GPN_BASE, + .config = &gpio_2bit_cfg_eint10, + .chip = { + .base = S3C64XX_GPN(0), + .ngpio = S3C64XX_GPIO_N_NR, + .label = "GPN", + }, + }, { + .base = S3C64XX_GPO_BASE, + .config = &gpio_2bit_cfg_eint11, + .chip = { + .base = S3C64XX_GPO(0), + .ngpio = S3C64XX_GPIO_O_NR, + .label = "GPO", + }, + }, { + .base = S3C64XX_GPP_BASE, + .config = &gpio_2bit_cfg_eint11, + .chip = { + .base = S3C64XX_GPP(0), + .ngpio = S3C64XX_GPIO_P_NR, + .label = "GPP", + }, + }, { + .base = S3C64XX_GPQ_BASE, + .config = &gpio_2bit_cfg_eint11, + .chip = { + .base = S3C64XX_GPQ(0), + .ngpio = S3C64XX_GPIO_Q_NR, + .label = "GPQ", + }, + }, +}; + +static __init void s3c64xx_gpiolib_add_4bit(struct s3c_gpio_chip *chip) +{ + chip->chip.direction_input = s3c64xx_gpiolib_4bit_input; + chip->chip.direction_output = s3c64xx_gpiolib_4bit_output; +} + +static __init void s3c64xx_gpiolib_add_4bit2(struct s3c_gpio_chip *chip) +{ + chip->chip.direction_input = s3c64xx_gpiolib_4bit2_input; + chip->chip.direction_output = s3c64xx_gpiolib_4bit2_output; +} + +static __init void s3c64xx_gpiolib_add(struct s3c_gpio_chip *chips, + int nr_chips, + void (*fn)(struct s3c_gpio_chip *)) +{ + for (; nr_chips > 0; nr_chips--, chips++) { + if (fn) + (fn)(chips); + s3c_gpiolib_add(chips); + } +} + +static __init int s3c64xx_gpiolib_init(void) +{ + s3c64xx_gpiolib_add(gpio_4bit, ARRAY_SIZE(gpio_4bit), + s3c64xx_gpiolib_add_4bit); + + s3c64xx_gpiolib_add(gpio_4bit2, ARRAY_SIZE(gpio_4bit2), + s3c64xx_gpiolib_add_4bit2); + + s3c64xx_gpiolib_add(gpio_2bit, ARRAY_SIZE(gpio_2bit), NULL); + + return 0; +} + +arch_initcall(s3c64xx_gpiolib_init); diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h new file mode 100644 index 00000000000..9aa0e427d11 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h @@ -0,0 +1,48 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-a.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank A register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPACON (S3C64XX_GPA_BASE + 0x00) +#define S3C64XX_GPADAT (S3C64XX_GPA_BASE + 0x04) +#define S3C64XX_GPAPUD (S3C64XX_GPA_BASE + 0x08) +#define S3C64XX_GPACONSLP (S3C64XX_GPA_BASE + 0x0c) +#define S3C64XX_GPAPUDSLP (S3C64XX_GPA_BASE + 0x10) + +#define S3C64XX_GPA_CONMASK(__gpio) (0xf << ((__gpio) * 4)) +#define S3C64XX_GPA_INPUT(__gpio) (0x0 << ((__gpio) * 4)) +#define S3C64XX_GPA_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) + +#define S3C64XX_GPA0_UART_RXD0 (0x02 << 0) +#define S3C64XX_GPA0_EINT_G1_0 (0x07 << 0) + +#define S3C64XX_GPA1_UART_TXD0 (0x02 << 4) +#define S3C64XX_GPA1_EINT_G1_1 (0x07 << 4) + +#define S3C64XX_GPA2_UART_nCTS0 (0x02 << 8) +#define S3C64XX_GPA2_EINT_G1_2 (0x07 << 8) + +#define S3C64XX_GPA3_UART_nRTS0 (0x02 << 12) +#define S3C64XX_GPA3_EINT_G1_3 (0x07 << 12) + +#define S3C64XX_GPA4_UART_RXD1 (0x02 << 16) +#define S3C64XX_GPA4_EINT_G1_4 (0x07 << 16) + +#define S3C64XX_GPA5_UART_TXD1 (0x02 << 20) +#define S3C64XX_GPA5_EINT_G1_5 (0x07 << 20) + +#define S3C64XX_GPA6_UART_nCTS1 (0x02 << 24) +#define S3C64XX_GPA6_EINT_G1_6 (0x07 << 24) + +#define S3C64XX_GPA7_UART_nRTS1 (0x02 << 28) +#define S3C64XX_GPA7_EINT_G1_7 (0x07 << 28) + diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h new file mode 100644 index 00000000000..3933adb4d50 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h @@ -0,0 +1,60 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-b.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank B register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPBCON (S3C64XX_GPB_BASE + 0x00) +#define S3C64XX_GPBDAT (S3C64XX_GPB_BASE + 0x04) +#define S3C64XX_GPBPUD (S3C64XX_GPB_BASE + 0x08) +#define S3C64XX_GPBCONSLP (S3C64XX_GPB_BASE + 0x0c) +#define S3C64XX_GPBPUDSLP (S3C64XX_GPB_BASE + 0x10) + +#define S3C64XX_GPB_CONMASK(__gpio) (0xf << ((__gpio) * 4)) +#define S3C64XX_GPB_INPUT(__gpio) (0x0 << ((__gpio) * 4)) +#define S3C64XX_GPB_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) + +#define S3C64XX_GPB0_UART_RXD2 (0x02 << 0) +#define S3C64XX_GPB0_EXTDMA_REQ (0x03 << 0) +#define S3C64XX_GPB0_IrDA_RXD (0x04 << 0) +#define S3C64XX_GPB0_ADDR_CF0 (0x05 << 0) +#define S3C64XX_GPB0_EINT_G1_8 (0x07 << 0) + +#define S3C64XX_GPB1_UART_TXD2 (0x02 << 4) +#define S3C64XX_GPB1_EXTDMA_ACK (0x03 << 4) +#define S3C64XX_GPB1_IrDA_TXD (0x04 << 4) +#define S3C64XX_GPB1_ADDR_CF1 (0x05 << 4) +#define S3C64XX_GPB1_EINT_G1_9 (0x07 << 4) + +#define S3C64XX_GPB2_UART_RXD3 (0x02 << 8) +#define S3C64XX_GPB2_IrDA_RXD (0x03 << 8) +#define S3C64XX_GPB2_EXTDMA_REQ (0x04 << 8) +#define S3C64XX_GPB2_ADDR_CF2 (0x05 << 8) +#define S3C64XX_GPB2_I2C_SCL1 (0x06 << 8) +#define S3C64XX_GPB2_EINT_G1_10 (0x07 << 8) + +#define S3C64XX_GPB3_UART_TXD3 (0x02 << 12) +#define S3C64XX_GPB3_IrDA_TXD (0x03 << 12) +#define S3C64XX_GPB3_EXTDMA_ACK (0x04 << 12) +#define S3C64XX_GPB3_I2C_SDA1 (0x06 << 12) +#define S3C64XX_GPB3_EINT_G1_11 (0x07 << 12) + +#define S3C64XX_GPB4_IrDA_SDBW (0x02 << 16) +#define S3C64XX_GPB4_CAM_FIELD (0x03 << 16) +#define S3C64XX_GPB4_CF_DATA_DIR (0x04 << 16) +#define S3C64XX_GPB4_EINT_G1_12 (0x07 << 16) + +#define S3C64XX_GPB5_I2C_SCL0 (0x02 << 20) +#define S3C64XX_GPB5_EINT_G1_13 (0x07 << 20) + +#define S3C64XX_GPB6_I2C_SDA0 (0x02 << 24) +#define S3C64XX_GPB6_EINT_G1_14 (0x07 << 24) + diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h new file mode 100644 index 00000000000..c47daf7e272 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h @@ -0,0 +1,53 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-c.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank C register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPCCON (S3C64XX_GPC_BASE + 0x00) +#define S3C64XX_GPCDAT (S3C64XX_GPC_BASE + 0x04) +#define S3C64XX_GPCPUD (S3C64XX_GPC_BASE + 0x08) +#define S3C64XX_GPCCONSLP (S3C64XX_GPC_BASE + 0x0c) +#define S3C64XX_GPCPUDSLP (S3C64XX_GPC_BASE + 0x10) + +#define S3C64XX_GPC_CONMASK(__gpio) (0xf << ((__gpio) * 4)) +#define S3C64XX_GPC_INPUT(__gpio) (0x0 << ((__gpio) * 4)) +#define S3C64XX_GPC_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) + +#define S3C64XX_GPC0_SPI_MISO0 (0x02 << 0) +#define S3C64XX_GPC0_EINT_G2_0 (0x07 << 0) + +#define S3C64XX_GPC1_SPI_CLKO (0x02 << 4) +#define S3C64XX_GPC1_EINT_G2_1 (0x07 << 4) + +#define S3C64XX_GPC2_SPI_MOSIO (0x02 << 8) +#define S3C64XX_GPC2_EINT_G2_2 (0x07 << 8) + +#define S3C64XX_GPC3_SPI_nCSO (0x02 << 12) +#define S3C64XX_GPC3_EINT_G2_3 (0x07 << 12) + +#define S3C64XX_GPC4_SPI_MISO1 (0x02 << 16) +#define S3C64XX_GPC4_MMC2_CMD (0x03 << 16) +#define S3C64XX_GPC4_I2S0_V40_DO (0x05 << 16) +#define S3C64XX_GPC4_EINT_G2_4 (0x07 << 16) + +#define S3C64XX_GPC5_SPI_CLK1 (0x02 << 20) +#define S3C64XX_GPC5_MMC2_CLK (0x03 << 20) +#define S3C64XX_GPC5_I2S1_V40_DO (0x05 << 20) +#define S3C64XX_GPC5_EINT_G2_5 (0x07 << 20) + +#define S3C64XX_GPC6_SPI_MOSI1 (0x02 << 24) +#define S3C64XX_GPC6_EINT_G2_6 (0x07 << 24) + +#define S3C64XX_GPC7_SPI_nCS1 (0x02 << 28) +#define S3C64XX_GPC7_I2S2_V40_DO (0x05 << 28) +#define S3C64XX_GPC7_EINT_G2_7 (0x07 << 28) + diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h new file mode 100644 index 00000000000..6fe4a49c26f --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h @@ -0,0 +1,49 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-d.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank D register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPDCON (S3C64XX_GPD_BASE + 0x00) +#define S3C64XX_GPDDAT (S3C64XX_GPD_BASE + 0x04) +#define S3C64XX_GPDPUD (S3C64XX_GPD_BASE + 0x08) +#define S3C64XX_GPDCONSLP (S3C64XX_GPD_BASE + 0x0c) +#define S3C64XX_GPDPUDSLP (S3C64XX_GPD_BASE + 0x10) + +#define S3C64XX_GPD_CONMASK(__gpio) (0xf << ((__gpio) * 4)) +#define S3C64XX_GPD_INPUT(__gpio) (0x0 << ((__gpio) * 4)) +#define S3C64XX_GPD_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) + +#define S3C64XX_GPD0_PCM0_SCLK (0x02 << 0) +#define S3C64XX_GPD0_I2S0_CLK (0x03 << 0) +#define S3C64XX_GPD0_AC97_BITCLK (0x04 << 0) +#define S3C64XX_GPD0_EINT_G3_0 (0x07 << 0) + +#define S3C64XX_GPD1_PCM0_EXTCLK (0x02 << 4) +#define S3C64XX_GPD1_I2S0_CDCLK (0x03 << 4) +#define S3C64XX_GPD1_AC97_nRESET (0x04 << 4) +#define S3C64XX_GPD1_EINT_G3_1 (0x07 << 4) + +#define S3C64XX_GPD2_PCM0_FSYNC (0x02 << 8) +#define S3C64XX_GPD2_I2S0_LRCLK (0x03 << 8) +#define S3C64XX_GPD2_AC97_SYNC (0x04 << 8) +#define S3C64XX_GPD2_EINT_G3_2 (0x07 << 8) + +#define S3C64XX_GPD3_PCM0_SIN (0x02 << 12) +#define S3C64XX_GPD3_I2S0_DI (0x03 << 12) +#define S3C64XX_GPD3_AC97_SDI (0x04 << 12) +#define S3C64XX_GPD3_EINT_G3_3 (0x07 << 12) + +#define S3C64XX_GPD4_PCM0_SOUT (0x02 << 16) +#define S3C64XX_GPD4_I2S0_D0 (0x03 << 16) +#define S3C64XX_GPD4_AC97_SDO (0x04 << 16) +#define S3C64XX_GPD4_EINT_G3_4 (0x07 << 16) + diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h new file mode 100644 index 00000000000..7fcf3d8e0a4 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h @@ -0,0 +1,44 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-e.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank E register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPECON (S3C64XX_GPE_BASE + 0x00) +#define S3C64XX_GPEDAT (S3C64XX_GPE_BASE + 0x04) +#define S3C64XX_GPEPUD (S3C64XX_GPE_BASE + 0x08) +#define S3C64XX_GPECONSLP (S3C64XX_GPE_BASE + 0x0c) +#define S3C64XX_GPEPUDSLP (S3C64XX_GPE_BASE + 0x10) + +#define S3C64XX_GPE_CONMASK(__gpio) (0xf << ((__gpio) * 4)) +#define S3C64XX_GPE_INPUT(__gpio) (0x0 << ((__gpio) * 4)) +#define S3C64XX_GPE_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) + +#define S3C64XX_GPE0_PCM1_SCLK (0x02 << 0) +#define S3C64XX_GPE0_I2S1_CLK (0x03 << 0) +#define S3C64XX_GPE0_AC97_BITCLK (0x04 << 0) + +#define S3C64XX_GPE1_PCM1_EXTCLK (0x02 << 4) +#define S3C64XX_GPE1_I2S1_CDCLK (0x03 << 4) +#define S3C64XX_GPE1_AC97_nRESET (0x04 << 4) + +#define S3C64XX_GPE2_PCM1_FSYNC (0x02 << 8) +#define S3C64XX_GPE2_I2S1_LRCLK (0x03 << 8) +#define S3C64XX_GPE2_AC97_SYNC (0x04 << 8) + +#define S3C64XX_GPE3_PCM1_SIN (0x02 << 12) +#define S3C64XX_GPE3_I2S1_DI (0x03 << 12) +#define S3C64XX_GPE3_AC97_SDI (0x04 << 12) + +#define S3C64XX_GPE4_PCM1_SOUT (0x02 << 16) +#define S3C64XX_GPE4_I2S1_D0 (0x03 << 16) +#define S3C64XX_GPE4_AC97_SDO (0x04 << 16) + diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h new file mode 100644 index 00000000000..f3faff974a1 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h @@ -0,0 +1,71 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-f.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank F register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPFCON (S3C64XX_GPF_BASE + 0x00) +#define S3C64XX_GPFDAT (S3C64XX_GPF_BASE + 0x04) +#define S3C64XX_GPFPUD (S3C64XX_GPF_BASE + 0x08) +#define S3C64XX_GPFCONSLP (S3C64XX_GPF_BASE + 0x0c) +#define S3C64XX_GPFPUDSLP (S3C64XX_GPF_BASE + 0x10) + +#define S3C64XX_GPF_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S3C64XX_GPF_INPUT(__gpio) (0x0 << ((__gpio) * 2)) +#define S3C64XX_GPF_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + +#define S3C64XX_GPF0_CAMIF_CLK (0x02 << 0) +#define S3C64XX_GPF0_EINT_G4_0 (0x03 << 0) + +#define S3C64XX_GPF1_CAMIF_HREF (0x02 << 2) +#define S3C64XX_GPF1_EINT_G4_1 (0x03 << 2) + +#define S3C64XX_GPF2_CAMIF_PCLK (0x02 << 4) +#define S3C64XX_GPF2_EINT_G4_2 (0x03 << 4) + +#define S3C64XX_GPF3_CAMIF_nRST (0x02 << 6) +#define S3C64XX_GPF3_EINT_G4_3 (0x03 << 6) + +#define S3C64XX_GPF4_CAMIF_VSYNC (0x02 << 8) +#define S3C64XX_GPF4_EINT_G4_4 (0x03 << 8) + +#define S3C64XX_GPF5_CAMIF_YDATA0 (0x02 << 10) +#define S3C64XX_GPF5_EINT_G4_5 (0x03 << 10) + +#define S3C64XX_GPF6_CAMIF_YDATA1 (0x02 << 12) +#define S3C64XX_GPF6_EINT_G4_6 (0x03 << 12) + +#define S3C64XX_GPF7_CAMIF_YDATA2 (0x02 << 14) +#define S3C64XX_GPF7_EINT_G4_7 (0x03 << 14) + +#define S3C64XX_GPF8_CAMIF_YDATA3 (0x02 << 16) +#define S3C64XX_GPF8_EINT_G4_8 (0x03 << 16) + +#define S3C64XX_GPF9_CAMIF_YDATA4 (0x02 << 18) +#define S3C64XX_GPF9_EINT_G4_9 (0x03 << 18) + +#define S3C64XX_GPF10_CAMIF_YDATA5 (0x02 << 20) +#define S3C64XX_GPF10_EINT_G4_10 (0x03 << 20) + +#define S3C64XX_GPF11_CAMIF_YDATA6 (0x02 << 22) +#define S3C64XX_GPF11_EINT_G4_11 (0x03 << 22) + +#define S3C64XX_GPF12_CAMIF_YDATA7 (0x02 << 24) +#define S3C64XX_GPF12_EINT_G4_12 (0x03 << 24) + +#define S3C64XX_GPF13_PWM_ECLK (0x02 << 26) +#define S3C64XX_GPF13_EINT_G4_13 (0x03 << 26) + +#define S3C64XX_GPF14_PWM_TOUT0 (0x02 << 28) +#define S3C64XX_GPF14_CLKOUT0 (0x03 << 28) + +#define S3C64XX_GPF15_PWM_TOUT1 (0x02 << 30) + diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h new file mode 100644 index 00000000000..35bbd2378e5 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h @@ -0,0 +1,42 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-g.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank G register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPGCON (S3C64XX_GPG_BASE + 0x00) +#define S3C64XX_GPGDAT (S3C64XX_GPG_BASE + 0x04) +#define S3C64XX_GPGPUD (S3C64XX_GPG_BASE + 0x08) +#define S3C64XX_GPGCONSLP (S3C64XX_GPG_BASE + 0x0c) +#define S3C64XX_GPGPUDSLP (S3C64XX_GPG_BASE + 0x10) + +#define S3C64XX_GPG_CONMASK(__gpio) (0xf << ((__gpio) * 4)) +#define S3C64XX_GPG_INPUT(__gpio) (0x0 << ((__gpio) * 4)) +#define S3C64XX_GPG_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) + +#define S3C64XX_GPG0_MMC0_CLK (0x02 << 0) +#define S3C64XX_GPG0_EINT_G5_0 (0x07 << 0) + +#define S3C64XX_GPG1_MMC0_CMD (0x02 << 4) +#define S3C64XX_GPG1_EINT_G5_1 (0x07 << 4) + +#define S3C64XX_GPG2_MMC0_DATA0 (0x02 << 8) +#define S3C64XX_GPG2_EINT_G5_2 (0x07 << 8) + +#define S3C64XX_GPG3_MMC0_DATA1 (0x02 << 12) +#define S3C64XX_GPG3_EINT_G5_3 (0x07 << 12) + +#define S3C64XX_GPG4_MMC0_DATA2 (0x02 << 16) +#define S3C64XX_GPG4_EINT_G5_4 (0x07 << 16) + +#define S3C64XX_GPG5_MMC0_DATA3 (0x02 << 20) +#define S3C64XX_GPG5_EINT_G5_5 (0x07 << 20) + diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h new file mode 100644 index 00000000000..81549516572 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h @@ -0,0 +1,74 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-h.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank H register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPHCON0 (S3C64XX_GPH_BASE + 0x00) +#define S3C64XX_GPHCON1 (S3C64XX_GPH_BASE + 0x04) +#define S3C64XX_GPHDAT (S3C64XX_GPH_BASE + 0x08) +#define S3C64XX_GPHPUD (S3C64XX_GPH_BASE + 0x0c) +#define S3C64XX_GPHCONSLP (S3C64XX_GPH_BASE + 0x10) +#define S3C64XX_GPHPUDSLP (S3C64XX_GPH_BASE + 0x14) + +#define S3C64XX_GPH_CONMASK(__gpio) (0xf << ((__gpio) * 4)) +#define S3C64XX_GPH_INPUT(__gpio) (0x0 << ((__gpio) * 4)) +#define S3C64XX_GPH_OUTPUT(__gpio) (0x1 << ((__gpio) * 4)) + +#define S3C64XX_GPH0_MMC1_CLK (0x02 << 0) +#define S3C64XX_GPH0_KP_COL0 (0x04 << 0) +#define S3C64XX_GPH0_EINT_G6_0 (0x07 << 0) + +#define S3C64XX_GPH1_MMC1_CMD (0x02 << 4) +#define S3C64XX_GPH1_KP_COL1 (0x04 << 4) +#define S3C64XX_GPH1_EINT_G6_1 (0x07 << 4) + +#define S3C64XX_GPH2_MMC1_DATA0 (0x02 << 8) +#define S3C64XX_GPH2_KP_COL2 (0x04 << 8) +#define S3C64XX_GPH2_EINT_G6_2 (0x07 << 8) + +#define S3C64XX_GPH3_MMC1_DATA1 (0x02 << 12) +#define S3C64XX_GPH3_KP_COL3 (0x04 << 12) +#define S3C64XX_GPH3_EINT_G6_3 (0x07 << 12) + +#define S3C64XX_GPH4_MMC1_DATA2 (0x02 << 16) +#define S3C64XX_GPH4_KP_COL4 (0x04 << 16) +#define S3C64XX_GPH4_EINT_G6_4 (0x07 << 16) + +#define S3C64XX_GPH5_MMC1_DATA3 (0x02 << 20) +#define S3C64XX_GPH5_KP_COL5 (0x04 << 20) +#define S3C64XX_GPH5_EINT_G6_5 (0x07 << 20) + +#define S3C64XX_GPH6_MMC1_DATA4 (0x02 << 24) +#define S3C64XX_GPH6_MMC2_DATA0 (0x03 << 24) +#define S3C64XX_GPH6_KP_COL6 (0x04 << 24) +#define S3C64XX_GPH6_I2S_V40_BCLK (0x05 << 24) +#define S3C64XX_GPH6_ADDR_CF0 (0x06 << 24) +#define S3C64XX_GPH6_EINT_G6_6 (0x07 << 24) + +#define S3C64XX_GPH7_MMC1_DATA5 (0x02 << 28) +#define S3C64XX_GPH7_MMC2_DATA1 (0x03 << 28) +#define S3C64XX_GPH7_KP_COL7 (0x04 << 28) +#define S3C64XX_GPH7_I2S_V40_CDCLK (0x05 << 28) +#define S3C64XX_GPH7_ADDR_CF1 (0x06 << 28) +#define S3C64XX_GPH7_EINT_G6_7 (0x07 << 28) + +#define S3C64XX_GPH8_MMC1_DATA6 (0x02 << 32) +#define S3C64XX_GPH8_MMC2_DATA2 (0x03 << 32) +#define S3C64XX_GPH8_I2S_V40_LRCLK (0x05 << 32) +#define S3C64XX_GPH8_ADDR_CF2 (0x06 << 32) +#define S3C64XX_GPH8_EINT_G6_8 (0x07 << 32) + +#define S3C64XX_GPH9_MMC1_DATA7 (0x02 << 36) +#define S3C64XX_GPH9_MMC2_DATA3 (0x03 << 36) +#define S3C64XX_GPH9_I2S_V40_DI (0x05 << 36) +#define S3C64XX_GPH9_EINT_G6_9 (0x07 << 36) + diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h new file mode 100644 index 00000000000..ce9ebe33556 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h @@ -0,0 +1,40 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-i.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank I register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPICON (S3C64XX_GPI_BASE + 0x00) +#define S3C64XX_GPIDAT (S3C64XX_GPI_BASE + 0x04) +#define S3C64XX_GPIPUD (S3C64XX_GPI_BASE + 0x08) +#define S3C64XX_GPICONSLP (S3C64XX_GPI_BASE + 0x0c) +#define S3C64XX_GPIPUDSLP (S3C64XX_GPI_BASE + 0x10) + +#define S3C64XX_GPI_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S3C64XX_GPI_INPUT(__gpio) (0x0 << ((__gpio) * 2)) +#define S3C64XX_GPI_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + +#define S3C64XX_GPI0_VD0 (0x02 << 0) +#define S3C64XX_GPI1_VD1 (0x02 << 2) +#define S3C64XX_GPI2_VD2 (0x02 << 4) +#define S3C64XX_GPI3_VD3 (0x02 << 6) +#define S3C64XX_GPI4_VD4 (0x02 << 8) +#define S3C64XX_GPI5_VD5 (0x02 << 10) +#define S3C64XX_GPI6_VD6 (0x02 << 12) +#define S3C64XX_GPI7_VD7 (0x02 << 14) +#define S3C64XX_GPI8_VD8 (0x02 << 16) +#define S3C64XX_GPI9_VD9 (0x02 << 18) +#define S3C64XX_GPI10_VD10 (0x02 << 20) +#define S3C64XX_GPI11_VD11 (0x02 << 22) +#define S3C64XX_GPI12_VD12 (0x02 << 24) +#define S3C64XX_GPI13_VD13 (0x02 << 26) +#define S3C64XX_GPI14_VD14 (0x02 << 28) +#define S3C64XX_GPI15_VD15 (0x02 << 30) diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h new file mode 100644 index 00000000000..21a906299d3 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h @@ -0,0 +1,36 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-j.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank J register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPJCON (S3C64XX_GPJ_BASE + 0x00) +#define S3C64XX_GPJDAT (S3C64XX_GPJ_BASE + 0x04) +#define S3C64XX_GPJPUD (S3C64XX_GPJ_BASE + 0x08) +#define S3C64XX_GPJCONSLP (S3C64XX_GPJ_BASE + 0x0c) +#define S3C64XX_GPJPUDSLP (S3C64XX_GPJ_BASE + 0x10) + +#define S3C64XX_GPJ_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S3C64XX_GPJ_INPUT(__gpio) (0x0 << ((__gpio) * 2)) +#define S3C64XX_GPJ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + +#define S3C64XX_GPJ0_VD16 (0x02 << 0) +#define S3C64XX_GPJ1_VD17 (0x02 << 2) +#define S3C64XX_GPJ2_VD18 (0x02 << 4) +#define S3C64XX_GPJ3_VD19 (0x02 << 6) +#define S3C64XX_GPJ4_VD20 (0x02 << 8) +#define S3C64XX_GPJ5_VD21 (0x02 << 10) +#define S3C64XX_GPJ6_VD22 (0x02 << 12) +#define S3C64XX_GPJ7_VD23 (0x02 << 14) +#define S3C64XX_GPJ8_LCD_HSYNC (0x02 << 16) +#define S3C64XX_GPJ9_LCD_VSYNC (0x02 << 18) +#define S3C64XX_GPJ10_LCD_VDEN (0x02 << 20) +#define S3C64XX_GPJ11_LCD_VCLK (0x02 << 22) diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h new file mode 100644 index 00000000000..569e7612088 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h @@ -0,0 +1,54 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-n.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank N register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPNCON (S3C64XX_GPN_BASE + 0x00) +#define S3C64XX_GPNDAT (S3C64XX_GPN_BASE + 0x04) +#define S3C64XX_GPNPUD (S3C64XX_GPN_BASE + 0x08) + +#define S3C64XX_GPN_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S3C64XX_GPN_INPUT(__gpio) (0x0 << ((__gpio) * 2)) +#define S3C64XX_GPN_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + +#define S3C64XX_GPN0_EINT0 (0x02 << 0) +#define S3C64XX_GPN0_KP_ROW0 (0x03 << 0) + +#define S3C64XX_GPN1_EINT1 (0x02 << 2) +#define S3C64XX_GPN1_KP_ROW1 (0x03 << 2) + +#define S3C64XX_GPN2_EINT2 (0x02 << 4) +#define S3C64XX_GPN2_KP_ROW2 (0x03 << 4) + +#define S3C64XX_GPN3_EINT3 (0x02 << 6) +#define S3C64XX_GPN3_KP_ROW3 (0x03 << 6) + +#define S3C64XX_GPN4_EINT4 (0x02 << 8) +#define S3C64XX_GPN4_KP_ROW4 (0x03 << 8) + +#define S3C64XX_GPN5_EINT5 (0x02 << 10) +#define S3C64XX_GPN5_KP_ROW5 (0x03 << 10) + +#define S3C64XX_GPN6_EINT6 (0x02 << 12) +#define S3C64XX_GPN6_KP_ROW6 (0x03 << 12) + +#define S3C64XX_GPN7_EINT7 (0x02 << 14) +#define S3C64XX_GPN7_KP_ROW7 (0x03 << 14) + +#define S3C64XX_GPN8_EINT8 (0x02 << 16) +#define S3C64XX_GPN9_EINT9 (0x02 << 18) +#define S3C64XX_GPN10_EINT10 (0x02 << 20) +#define S3C64XX_GPN11_EINT11 (0x02 << 22) +#define S3C64XX_GPN12_EINT12 (0x02 << 24) +#define S3C64XX_GPN13_EINT13 (0x02 << 26) +#define S3C64XX_GPN14_EINT14 (0x02 << 28) +#define S3C64XX_GPN15_EINT15 (0x02 << 30) diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h new file mode 100644 index 00000000000..b09e12954b5 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h @@ -0,0 +1,70 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-o.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank O register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPOCON (S3C64XX_GPO_BASE + 0x00) +#define S3C64XX_GPODAT (S3C64XX_GPO_BASE + 0x04) +#define S3C64XX_GPOPUD (S3C64XX_GPO_BASE + 0x08) +#define S3C64XX_GPOCONSLP (S3C64XX_GPO_BASE + 0x0c) +#define S3C64XX_GPOPUDSLP (S3C64XX_GPO_BASE + 0x10) + +#define S3C64XX_GPO_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S3C64XX_GPO_INPUT(__gpio) (0x0 << ((__gpio) * 2)) +#define S3C64XX_GPO_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + +#define S3C64XX_GPO0_MEM0_nCS2 (0x02 << 0) +#define S3C64XX_GPO0_EINT_G7_0 (0x03 << 0) + +#define S3C64XX_GPO1_MEM0_nCS3 (0x02 << 2) +#define S3C64XX_GPO1_EINT_G7_1 (0x03 << 2) + +#define S3C64XX_GPO2_MEM0_nCS4 (0x02 << 4) +#define S3C64XX_GPO2_EINT_G7_2 (0x03 << 4) + +#define S3C64XX_GPO3_MEM0_nCS5 (0x02 << 6) +#define S3C64XX_GPO3_EINT_G7_3 (0x03 << 6) + +#define S3C64XX_GPO4_EINT_G7_4 (0x03 << 8) + +#define S3C64XX_GPO5_EINT_G7_5 (0x03 << 10) + +#define S3C64XX_GPO6_MEM0_ADDR6 (0x02 << 12) +#define S3C64XX_GPO6_EINT_G7_6 (0x03 << 12) + +#define S3C64XX_GPO7_MEM0_ADDR7 (0x02 << 14) +#define S3C64XX_GPO7_EINT_G7_7 (0x03 << 14) + +#define S3C64XX_GPO8_MEM0_ADDR8 (0x02 << 16) +#define S3C64XX_GPO8_EINT_G7_8 (0x03 << 16) + +#define S3C64XX_GPO9_MEM0_ADDR9 (0x02 << 18) +#define S3C64XX_GPO9_EINT_G7_9 (0x03 << 18) + +#define S3C64XX_GPO10_MEM0_ADDR10 (0x02 << 20) +#define S3C64XX_GPO10_EINT_G7_10 (0x03 << 20) + +#define S3C64XX_GPO11_MEM0_ADDR11 (0x02 << 22) +#define S3C64XX_GPO11_EINT_G7_11 (0x03 << 22) + +#define S3C64XX_GPO12_MEM0_ADDR12 (0x02 << 24) +#define S3C64XX_GPO12_EINT_G7_12 (0x03 << 24) + +#define S3C64XX_GPO13_MEM0_ADDR13 (0x02 << 26) +#define S3C64XX_GPO13_EINT_G7_13 (0x03 << 26) + +#define S3C64XX_GPO14_MEM0_ADDR14 (0x02 << 28) +#define S3C64XX_GPO14_EINT_G7_14 (0x03 << 28) + +#define S3C64XX_GPO15_MEM0_ADDR15 (0x02 << 30) +#define S3C64XX_GPO15_EINT_G7_15 (0x03 << 30) + diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h new file mode 100644 index 00000000000..92f00517926 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h @@ -0,0 +1,69 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-p.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank P register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPPCON (S3C64XX_GPP_BASE + 0x00) +#define S3C64XX_GPPDAT (S3C64XX_GPP_BASE + 0x04) +#define S3C64XX_GPPPUD (S3C64XX_GPP_BASE + 0x08) +#define S3C64XX_GPPCONSLP (S3C64XX_GPP_BASE + 0x0c) +#define S3C64XX_GPPPUDSLP (S3C64XX_GPP_BASE + 0x10) + +#define S3C64XX_GPP_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S3C64XX_GPP_INPUT(__gpio) (0x0 << ((__gpio) * 2)) +#define S3C64XX_GPP_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + +#define S3C64XX_GPP0_MEM0_ADDRV (0x02 << 0) +#define S3C64XX_GPP0_EINT_G8_0 (0x03 << 0) + +#define S3C64XX_GPP1_MEM0_SMCLK (0x02 << 2) +#define S3C64XX_GPP1_EINT_G8_1 (0x03 << 2) + +#define S3C64XX_GPP2_MEM0_nWAIT (0x02 << 4) +#define S3C64XX_GPP2_EINT_G8_2 (0x03 << 4) + +#define S3C64XX_GPP3_MEM0_RDY0_ALE (0x02 << 6) +#define S3C64XX_GPP3_EINT_G8_3 (0x03 << 6) + +#define S3C64XX_GPP4_MEM0_RDY1_CLE (0x02 << 8) +#define S3C64XX_GPP4_EINT_G8_4 (0x03 << 8) + +#define S3C64XX_GPP5_MEM0_INTsm0_FWE (0x02 << 10) +#define S3C64XX_GPP5_EINT_G8_5 (0x03 << 10) + +#define S3C64XX_GPP6_MEM0_(null) (0x02 << 12) +#define S3C64XX_GPP6_EINT_G8_6 (0x03 << 12) + +#define S3C64XX_GPP7_MEM0_INTsm1_FRE (0x02 << 14) +#define S3C64XX_GPP7_EINT_G8_7 (0x03 << 14) + +#define S3C64XX_GPP8_MEM0_RPn_RnB (0x02 << 16) +#define S3C64XX_GPP8_EINT_G8_8 (0x03 << 16) + +#define S3C64XX_GPP9_MEM0_ATA_RESET (0x02 << 18) +#define S3C64XX_GPP9_EINT_G8_9 (0x03 << 18) + +#define S3C64XX_GPP10_MEM0_ATA_INPACK (0x02 << 20) +#define S3C64XX_GPP10_EINT_G8_10 (0x03 << 20) + +#define S3C64XX_GPP11_MEM0_ATA_REG (0x02 << 22) +#define S3C64XX_GPP11_EINT_G8_11 (0x03 << 22) + +#define S3C64XX_GPP12_MEM0_ATA_WE (0x02 << 24) +#define S3C64XX_GPP12_EINT_G8_12 (0x03 << 24) + +#define S3C64XX_GPP13_MEM0_ATA_OE (0x02 << 26) +#define S3C64XX_GPP13_EINT_G8_13 (0x03 << 26) + +#define S3C64XX_GPP14_MEM0_ATA_CD (0x02 << 28) +#define S3C64XX_GPP14_EINT_G8_14 (0x03 << 28) + diff --git a/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h new file mode 100644 index 00000000000..565e60aaee4 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h @@ -0,0 +1,46 @@ +/* linux/arch/arm/plat-s3c64xx/include/plat/gpio-bank-q.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * GPIO Bank Q register and configuration definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C64XX_GPQCON (S3C64XX_GPQ_BASE + 0x00) +#define S3C64XX_GPQDAT (S3C64XX_GPQ_BASE + 0x04) +#define S3C64XX_GPQPUD (S3C64XX_GPQ_BASE + 0x08) +#define S3C64XX_GPQCONSLP (S3C64XX_GPQ_BASE + 0x0c) +#define S3C64XX_GPQPUDSLP (S3C64XX_GPQ_BASE + 0x10) + +#define S3C64XX_GPQ_CONMASK(__gpio) (0x3 << ((__gpio) * 2)) +#define S3C64XX_GPQ_INPUT(__gpio) (0x0 << ((__gpio) * 2)) +#define S3C64XX_GPQ_OUTPUT(__gpio) (0x1 << ((__gpio) * 2)) + +#define S3C64XX_GPQ0_MEM0_ADDR18_RAS (0x02 << 0) +#define S3C64XX_GPQ0_EINT_G9_0 (0x03 << 0) + +#define S3C64XX_GPQ1_MEM0_ADDR19_CAS (0x02 << 2) +#define S3C64XX_GPQ1_EINT_G9_1 (0x03 << 2) + +#define S3C64XX_GPQ2_EINT_G9_2 (0x03 << 4) + +#define S3C64XX_GPQ3_EINT_G9_3 (0x03 << 6) + +#define S3C64XX_GPQ4_EINT_G9_4 (0x03 << 8) + +#define S3C64XX_GPQ5_EINT_G9_5 (0x03 << 10) + +#define S3C64XX_GPQ6_EINT_G9_6 (0x03 << 12) + +#define S3C64XX_GPQ7_MEM0_ADDR17_WENDMC (0x02 << 14) +#define S3C64XX_GPQ7_EINT_G9_7 (0x03 << 14) + +#define S3C64XX_GPQ8_MEM0_ADDR16_APDMC (0x02 << 16) +#define S3C64XX_GPQ8_EINT_G9_8 (0x03 << 16) + diff --git a/arch/arm/plat-s3c64xx/include/plat/irqs.h b/arch/arm/plat-s3c64xx/include/plat/irqs.h new file mode 100644 index 00000000000..02e8dd4c97d --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/irqs.h @@ -0,0 +1,201 @@ +/* linux/arch/arm/plat-s3c64xx/include/mach/irqs.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - Common IRQ support + */ + +#ifndef __ASM_PLAT_S3C64XX_IRQS_H +#define __ASM_PLAT_S3C64XX_IRQS_H __FILE__ + +/* we keep the first set of CPU IRQs out of the range of + * the ISA space, so that the PC104 has them to itself + * and we don't end up having to do horrible things to the + * standard ISA drivers.... + * + * note, since we're using the VICs, our start must be a + * mulitple of 32 to allow the common code to work + */ + +#define S3C_IRQ_OFFSET (32) + +#define S3C_IRQ(x) ((x) + S3C_IRQ_OFFSET) + +#define S3C_VIC0_BASE S3C_IRQ(0) +#define S3C_VIC1_BASE S3C_IRQ(32) + +/* UART interrupts, each UART has 4 intterupts per channel so + * use the space between the ISA and S3C main interrupts. Note, these + * are not in the same order as the S3C24XX series! */ + +#define IRQ_S3CUART_BASE0 (16) +#define IRQ_S3CUART_BASE1 (20) +#define IRQ_S3CUART_BASE2 (24) +#define IRQ_S3CUART_BASE3 (28) + +#define UART_IRQ_RXD (0) +#define UART_IRQ_ERR (1) +#define UART_IRQ_TXD (2) +#define UART_IRQ_MODEM (3) + +#define IRQ_S3CUART_RX0 (IRQ_S3CUART_BASE0 + UART_IRQ_RXD) +#define IRQ_S3CUART_TX0 (IRQ_S3CUART_BASE0 + UART_IRQ_TXD) +#define IRQ_S3CUART_ERR0 (IRQ_S3CUART_BASE0 + UART_IRQ_ERR) + +#define IRQ_S3CUART_RX1 (IRQ_S3CUART_BASE1 + UART_IRQ_RXD) +#define IRQ_S3CUART_TX1 (IRQ_S3CUART_BASE1 + UART_IRQ_TXD) +#define IRQ_S3CUART_ERR1 (IRQ_S3CUART_BASE1 + UART_IRQ_ERR) + +#define IRQ_S3CUART_RX2 (IRQ_S3CUART_BASE2 + UART_IRQ_RXD) +#define IRQ_S3CUART_TX2 (IRQ_S3CUART_BASE2 + UART_IRQ_TXD) +#define IRQ_S3CUART_ERR2 (IRQ_S3CUART_BASE2 + UART_IRQ_ERR) + +#define IRQ_S3CUART_RX3 (IRQ_S3CUART_BASE3 + UART_IRQ_RXD) +#define IRQ_S3CUART_TX3 (IRQ_S3CUART_BASE3 + UART_IRQ_TXD) +#define IRQ_S3CUART_ERR3 (IRQ_S3CUART_BASE3 + UART_IRQ_ERR) + +/* VIC based IRQs */ + +#define S3C64XX_IRQ_VIC0(x) (S3C_VIC0_BASE + (x)) +#define S3C64XX_IRQ_VIC1(x) (S3C_VIC1_BASE + (x)) + +/* VIC0 */ + +#define IRQ_EINT0_3 S3C64XX_IRQ_VIC0(0) +#define IRQ_EINT4_11 S3C64XX_IRQ_VIC0(1) +#define IRQ_RTC_TIC S3C64XX_IRQ_VIC0(2) +#define IRQ_CAMIF_C S3C64XX_IRQ_VIC0(3) +#define IRQ_CAMIF_P S3C64XX_IRQ_VIC0(4) +#define IRQ_CAMIF_MC S3C64XX_IRQ_VIC0(5) +#define IRQ_S3C6410_IIC1 S3C64XX_IRQ_VIC0(5) +#define IRQ_S3C6410_IIS S3C64XX_IRQ_VIC0(6) +#define IRQ_S3C6400_CAMIF_MP S3C64XX_IRQ_VIC0(6) +#define IRQ_CAMIF_WE_C S3C64XX_IRQ_VIC0(7) +#define IRQ_S3C6410_G3D S3C64XX_IRQ_VIC0(8) +#define IRQ_S3C6400_CAMIF_WE_P S3C64XX_IRQ_VIC0(8) +#define IRQ_POST0 S3C64XX_IRQ_VIC0(9) +#define IRQ_ROTATOR S3C64XX_IRQ_VIC0(10) +#define IRQ_2D S3C64XX_IRQ_VIC0(11) +#define IRQ_TVENC S3C64XX_IRQ_VIC0(12) +#define IRQ_SCALER S3C64XX_IRQ_VIC0(13) +#define IRQ_BATF S3C64XX_IRQ_VIC0(14) +#define IRQ_JPEG S3C64XX_IRQ_VIC0(15) +#define IRQ_MFC S3C64XX_IRQ_VIC0(16) +#define IRQ_SDMA0 S3C64XX_IRQ_VIC0(17) +#define IRQ_SDMA1 S3C64XX_IRQ_VIC0(18) +#define IRQ_ARM_DMAERR S3C64XX_IRQ_VIC0(19) +#define IRQ_ARM_DMA S3C64XX_IRQ_VIC0(20) +#define IRQ_ARM_DMAS S3C64XX_IRQ_VIC0(21) +#define IRQ_KEYPAD S3C64XX_IRQ_VIC0(22) +#define IRQ_TIMER0_VIC S3C64XX_IRQ_VIC0(23) +#define IRQ_TIMER1_VIC S3C64XX_IRQ_VIC0(24) +#define IRQ_TIMER2_VIC S3C64XX_IRQ_VIC0(25) +#define IRQ_WDT S3C64XX_IRQ_VIC0(26) +#define IRQ_TIMER3_VIC S3C64XX_IRQ_VIC0(27) +#define IRQ_TIMER4_VIC S3C64XX_IRQ_VIC0(28) +#define IRQ_LCD_FIFO S3C64XX_IRQ_VIC0(29) +#define IRQ_LCD_VSYNC S3C64XX_IRQ_VIC0(30) +#define IRQ_LCD_SYSTEM S3C64XX_IRQ_VIC0(31) + +/* VIC1 */ + +#define IRQ_EINT12_19 S3C64XX_IRQ_VIC1(0) +#define IRQ_EINT20_27 S3C64XX_IRQ_VIC1(1) +#define IRQ_PCM0 S3C64XX_IRQ_VIC1(2) +#define IRQ_PCM1 S3C64XX_IRQ_VIC1(3) +#define IRQ_AC97 S3C64XX_IRQ_VIC1(4) +#define IRQ_UART0 S3C64XX_IRQ_VIC1(5) +#define IRQ_UART1 S3C64XX_IRQ_VIC1(6) +#define IRQ_UART2 S3C64XX_IRQ_VIC1(7) +#define IRQ_UART3 S3C64XX_IRQ_VIC1(8) +#define IRQ_DMA0 S3C64XX_IRQ_VIC1(9) +#define IRQ_DMA1 S3C64XX_IRQ_VIC1(10) +#define IRQ_ONENAND0 S3C64XX_IRQ_VIC1(11) +#define IRQ_ONENAND1 S3C64XX_IRQ_VIC1(12) +#define IRQ_NFC S3C64XX_IRQ_VIC1(13) +#define IRQ_CFCON S3C64XX_IRQ_VIC1(14) +#define IRQ_UHOST S3C64XX_IRQ_VIC1(15) +#define IRQ_SPI0 S3C64XX_IRQ_VIC1(16) +#define IRQ_SPI1 S3C64XX_IRQ_VIC1(17) +#define IRQ_IIC S3C64XX_IRQ_VIC1(18) +#define IRQ_HSItx S3C64XX_IRQ_VIC1(19) +#define IRQ_HSIrx S3C64XX_IRQ_VIC1(20) +#define IRQ_RESERVED S3C64XX_IRQ_VIC1(21) +#define IRQ_MSM S3C64XX_IRQ_VIC1(22) +#define IRQ_HOSTIF S3C64XX_IRQ_VIC1(23) +#define IRQ_HSMMC0 S3C64XX_IRQ_VIC1(24) +#define IRQ_HSMMC1 S3C64XX_IRQ_VIC1(25) +#define IRQ_HSMMC2 IRQ_SPI1 /* shared with SPI1 */ +#define IRQ_OTG S3C64XX_IRQ_VIC1(26) +#define IRQ_IRDA S3C64XX_IRQ_VIC1(27) +#define IRQ_RTC_ALARM S3C64XX_IRQ_VIC1(28) +#define IRQ_SEC S3C64XX_IRQ_VIC1(29) +#define IRQ_PENDN S3C64XX_IRQ_VIC1(30) +#define IRQ_TC IRQ_PENDN +#define IRQ_ADC S3C64XX_IRQ_VIC1(31) + +#define S3C64XX_TIMER_IRQ(x) S3C_IRQ(64 + (x)) + +#define IRQ_TIMER0 S3C64XX_TIMER_IRQ(0) +#define IRQ_TIMER1 S3C64XX_TIMER_IRQ(1) +#define IRQ_TIMER2 S3C64XX_TIMER_IRQ(2) +#define IRQ_TIMER3 S3C64XX_TIMER_IRQ(3) +#define IRQ_TIMER4 S3C64XX_TIMER_IRQ(4) + +/* compatibility for device defines */ + +#define IRQ_IIC1 IRQ_S3C6410_IIC1 + +/* Since the IRQ_EINT(x) are a linear mapping on current s3c64xx series + * we just defined them as an IRQ_EINT(x) macro from S3C_IRQ_EINT_BASE + * which we place after the pair of VICs. */ + +#define S3C_IRQ_EINT_BASE S3C_IRQ(64+5) + +#define S3C_EINT(x) ((x) + S3C_IRQ_EINT_BASE) +#define IRQ_EINT(x) S3C_EINT(x) + +/* Next the external interrupt groups. These are similar to the IRQ_EINT(x) + * that they are sourced from the GPIO pins but with a different scheme for + * priority and source indication. + * + * The IRQ_EINT(x) can be thought of as 'group 0' of the available GPIO + * interrupts, but for historical reasons they are kept apart from these + * next interrupts. + * + * Use IRQ_EINT_GROUP(group, offset) to get the number for use in the + * machine specific support files. + */ + +#define IRQ_EINT_GROUP1_NR (15) +#define IRQ_EINT_GROUP2_NR (8) +#define IRQ_EINT_GROUP3_NR (5) +#define IRQ_EINT_GROUP4_NR (14) +#define IRQ_EINT_GROUP5_NR (7) +#define IRQ_EINT_GROUP6_NR (10) +#define IRQ_EINT_GROUP7_NR (16) +#define IRQ_EINT_GROUP8_NR (15) +#define IRQ_EINT_GROUP9_NR (9) + +#define IRQ_EINT_GROUP_BASE S3C_EINT(28) +#define IRQ_EINT_GROUP1_BASE (IRQ_EINT_GROUP_BASE + 0x00) +#define IRQ_EINT_GROUP2_BASE (IRQ_EINT_GROUP1_BASE + IRQ_EINT_GROUP1_NR) +#define IRQ_EINT_GROUP3_BASE (IRQ_EINT_GROUP2_BASE + IRQ_EINT_GROUP2_NR) +#define IRQ_EINT_GROUP4_BASE (IRQ_EINT_GROUP3_BASE + IRQ_EINT_GROUP3_NR) +#define IRQ_EINT_GROUP5_BASE (IRQ_EINT_GROUP4_BASE + IRQ_EINT_GROUP4_NR) +#define IRQ_EINT_GROUP6_BASE (IRQ_EINT_GROUP5_BASE + IRQ_EINT_GROUP5_NR) +#define IRQ_EINT_GROUP7_BASE (IRQ_EINT_GROUP6_BASE + IRQ_EINT_GROUP6_NR) +#define IRQ_EINT_GROUP8_BASE (IRQ_EINT_GROUP7_BASE + IRQ_EINT_GROUP7_NR) +#define IRQ_EINT_GROUP9_BASE (IRQ_EINT_GROUP8_BASE + IRQ_EINT_GROUP8_NR) + +#define IRQ_EINT_GROUP(group, no) (IRQ_EINT_GROUP##group##__BASE + (x)) + +/* Set the default NR_IRQS */ + +#define NR_IRQS (IRQ_EINT_GROUP9_BASE + IRQ_EINT_GROUP9_NR + 1) + +#endif /* __ASM_PLAT_S3C64XX_IRQS_H */ + diff --git a/arch/arm/plat-s3c64xx/include/plat/pll.h b/arch/arm/plat-s3c64xx/include/plat/pll.h new file mode 100644 index 00000000000..1a8576422f1 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/pll.h @@ -0,0 +1,74 @@ +/* arch/arm/plat-s3c64xx/include/plat/pll.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX PLL code + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#define S3C6400_PLL_MDIV_MASK ((1 << (25-16)) - 1) +#define S3C6400_PLL_PDIV_MASK ((1 << (13-8)) - 1) +#define S3C6400_PLL_SDIV_MASK ((1 << (2-0)) - 1) +#define S3C6400_PLL_MDIV_SHIFT (16) +#define S3C6400_PLL_PDIV_SHIFT (8) +#define S3C6400_PLL_SDIV_SHIFT (0) + +#include <asm/div64.h> + +static inline unsigned long s3c6400_get_pll(unsigned long baseclk, + u32 pllcon) +{ + u32 mdiv, pdiv, sdiv; + u64 fvco = baseclk; + + mdiv = (pllcon >> S3C6400_PLL_MDIV_SHIFT) & S3C6400_PLL_MDIV_MASK; + pdiv = (pllcon >> S3C6400_PLL_PDIV_SHIFT) & S3C6400_PLL_PDIV_MASK; + sdiv = (pllcon >> S3C6400_PLL_SDIV_SHIFT) & S3C6400_PLL_SDIV_MASK; + + fvco *= mdiv; + do_div(fvco, (pdiv << sdiv)); + + return (unsigned long)fvco; +} + +#define S3C6400_EPLL_MDIV_MASK ((1 << (23-16)) - 1) +#define S3C6400_EPLL_PDIV_MASK ((1 << (13-8)) - 1) +#define S3C6400_EPLL_SDIV_MASK ((1 << (2-0)) - 1) +#define S3C6400_EPLL_MDIV_SHIFT (16) +#define S3C6400_EPLL_PDIV_SHIFT (8) +#define S3C6400_EPLL_SDIV_SHIFT (0) +#define S3C6400_EPLL_KDIV_MASK (0xffff) + +static inline unsigned long s3c6400_get_epll(unsigned long baseclk) +{ + unsigned long result; + u32 epll0 = __raw_readl(S3C_EPLL_CON0); + u32 epll1 = __raw_readl(S3C_EPLL_CON1); + u32 mdiv, pdiv, sdiv, kdiv; + u64 tmp; + + mdiv = (epll0 >> S3C6400_EPLL_MDIV_SHIFT) & S3C6400_EPLL_MDIV_MASK; + pdiv = (epll0 >> S3C6400_EPLL_PDIV_SHIFT) & S3C6400_EPLL_PDIV_MASK; + sdiv = (epll0 >> S3C6400_EPLL_SDIV_SHIFT) & S3C6400_EPLL_SDIV_MASK; + kdiv = epll1 & S3C6400_EPLL_KDIV_MASK; + + /* We need to multiple baseclk by mdiv (the integer part) and kdiv + * which is in 2^16ths, so shift mdiv up (does not overflow) and + * add kdiv before multiplying. The use of tmp is to avoid any + * overflows before shifting bac down into result when multipling + * by the mdiv and kdiv pair. + */ + + tmp = baseclk; + tmp *= (mdiv << 16) + kdiv; + do_div(tmp, (pdiv << sdiv)); + result = tmp >> 16; + + return result; +} diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-clock.h b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h new file mode 100644 index 00000000000..b1082c16324 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/regs-clock.h @@ -0,0 +1,224 @@ +/* arch/arm/plat-s3c64xx/include/plat/regs-clock.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX clock register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_REGS_CLOCK_H +#define __PLAT_REGS_CLOCK_H __FILE__ + +#define S3C_CLKREG(x) (S3C_VA_SYS + (x)) + +#define S3C_APLL_LOCK S3C_CLKREG(0x00) +#define S3C_MPLL_LOCK S3C_CLKREG(0x04) +#define S3C_EPLL_LOCK S3C_CLKREG(0x08) +#define S3C_APLL_CON S3C_CLKREG(0x0C) +#define S3C_MPLL_CON S3C_CLKREG(0x10) +#define S3C_EPLL_CON0 S3C_CLKREG(0x14) +#define S3C_EPLL_CON1 S3C_CLKREG(0x18) +#define S3C_CLK_SRC S3C_CLKREG(0x1C) +#define S3C_CLK_DIV0 S3C_CLKREG(0x20) +#define S3C_CLK_DIV1 S3C_CLKREG(0x24) +#define S3C_CLK_DIV2 S3C_CLKREG(0x28) +#define S3C_CLK_OUT S3C_CLKREG(0x2C) +#define S3C_HCLK_GATE S3C_CLKREG(0x30) +#define S3C_PCLK_GATE S3C_CLKREG(0x34) +#define S3C_SCLK_GATE S3C_CLKREG(0x38) + +/* CLKDIV0 */ +#define S3C6400_CLKDIV0_MFC_MASK (0xf << 28) +#define S3C6400_CLKDIV0_MFC_SHIFT (28) +#define S3C6400_CLKDIV0_JPEG_MASK (0xf << 24) +#define S3C6400_CLKDIV0_JPEG_SHIFT (24) +#define S3C6400_CLKDIV0_CAM_MASK (0xf << 20) +#define S3C6400_CLKDIV0_CAM_SHIFT (20) +#define S3C6400_CLKDIV0_SECURITY_MASK (0x3 << 18) +#define S3C6400_CLKDIV0_SECURITY_SHIFT (18) +#define S3C6400_CLKDIV0_PCLK_MASK (0xf << 12) +#define S3C6400_CLKDIV0_PCLK_SHIFT (12) +#define S3C6400_CLKDIV0_HCLK2_MASK (0x7 << 9) +#define S3C6400_CLKDIV0_HCLK2_SHIFT (9) +#define S3C6400_CLKDIV0_HCLK_MASK (0x1 << 8) +#define S3C6400_CLKDIV0_HCLK_SHIFT (8) +#define S3C6400_CLKDIV0_MPLL_MASK (0x1 << 4) +#define S3C6400_CLKDIV0_MPLL_SHIFT (4) +#define S3C6400_CLKDIV0_ARM_MASK (0x3 << 0) +#define S3C6410_CLKDIV0_ARM_MASK (0x7 << 0) +#define S3C6400_CLKDIV0_ARM_SHIFT (0) + +/* CLKDIV1 */ +#define S3C6410_CLKDIV1_FIMC_MASK (0xf << 24) +#define S3C6410_CLKDIV1_FIMC_SHIFT (24) +#define S3C6400_CLKDIV1_UHOST_MASK (0xf << 20) +#define S3C6400_CLKDIV1_UHOST_SHIFT (20) +#define S3C6400_CLKDIV1_SCALER_MASK (0xf << 16) +#define S3C6400_CLKDIV1_SCALER_SHIFT (16) +#define S3C6400_CLKDIV1_LCD_MASK (0xf << 12) +#define S3C6400_CLKDIV1_LCD_SHIFT (12) +#define S3C6400_CLKDIV1_MMC2_MASK (0xf << 8) +#define S3C6400_CLKDIV1_MMC2_SHIFT (8) +#define S3C6400_CLKDIV1_MMC1_MASK (0xf << 4) +#define S3C6400_CLKDIV1_MMC1_SHIFT (4) +#define S3C6400_CLKDIV1_MMC0_MASK (0xf << 0) +#define S3C6400_CLKDIV1_MMC0_SHIFT (0) + +/* CLKDIV2 */ +#define S3C6410_CLKDIV2_AUDIO2_MASK (0xf << 24) +#define S3C6410_CLKDIV2_AUDIO2_SHIFT (24) +#define S3C6400_CLKDIV2_IRDA_MASK (0xf << 20) +#define S3C6400_CLKDIV2_IRDA_SHIFT (20) +#define S3C6400_CLKDIV2_UART_MASK (0xf << 16) +#define S3C6400_CLKDIV2_UART_SHIFT (16) +#define S3C6400_CLKDIV2_AUDIO1_MASK (0xf << 12) +#define S3C6400_CLKDIV2_AUDIO1_SHIFT (12) +#define S3C6400_CLKDIV2_AUDIO0_MASK (0xf << 8) +#define S3C6400_CLKDIV2_AUDIO0_SHIFT (8) +#define S3C6400_CLKDIV2_SPI1_MASK (0xf << 4) +#define S3C6400_CLKDIV2_SPI1_SHIFT (4) +#define S3C6400_CLKDIV2_SPI0_MASK (0xf << 0) +#define S3C6400_CLKDIV2_SPI0_SHIFT (0) + +/* HCLK GATE Registers */ +#define S3C_CLKCON_HCLK_BUS (1<<30) +#define S3C_CLKCON_HCLK_SECUR (1<<29) +#define S3C_CLKCON_HCLK_SDMA1 (1<<28) +#define S3C_CLKCON_HCLK_SDMA2 (1<<27) +#define S3C_CLKCON_HCLK_UHOST (1<<26) +#define S3C_CLKCON_HCLK_IROM (1<<25) +#define S3C_CLKCON_HCLK_DDR1 (1<<24) +#define S3C_CLKCON_HCLK_DDR0 (1<<23) +#define S3C_CLKCON_HCLK_MEM1 (1<<22) +#define S3C_CLKCON_HCLK_MEM0 (1<<21) +#define S3C_CLKCON_HCLK_USB (1<<20) +#define S3C_CLKCON_HCLK_HSMMC2 (1<<19) +#define S3C_CLKCON_HCLK_HSMMC1 (1<<18) +#define S3C_CLKCON_HCLK_HSMMC0 (1<<17) +#define S3C_CLKCON_HCLK_MDP (1<<16) +#define S3C_CLKCON_HCLK_DHOST (1<<15) +#define S3C_CLKCON_HCLK_IHOST (1<<14) +#define S3C_CLKCON_HCLK_DMA1 (1<<13) +#define S3C_CLKCON_HCLK_DMA0 (1<<12) +#define S3C_CLKCON_HCLK_JPEG (1<<11) +#define S3C_CLKCON_HCLK_CAMIF (1<<10) +#define S3C_CLKCON_HCLK_SCALER (1<<9) +#define S3C_CLKCON_HCLK_2D (1<<8) +#define S3C_CLKCON_HCLK_TV (1<<7) +#define S3C_CLKCON_HCLK_POST0 (1<<5) +#define S3C_CLKCON_HCLK_ROT (1<<4) +#define S3C_CLKCON_HCLK_LCD (1<<3) +#define S3C_CLKCON_HCLK_TZIC (1<<2) +#define S3C_CLKCON_HCLK_INTC (1<<1) +#define S3C_CLKCON_HCLK_MFC (1<<0) + +/* PCLK GATE Registers */ +#define S3C6410_CLKCON_PCLK_I2C1 (1<<27) +#define S3C6410_CLKCON_PCLK_IIS2 (1<<26) +#define S3C_CLKCON_PCLK_SKEY (1<<24) +#define S3C_CLKCON_PCLK_CHIPID (1<<23) +#define S3C_CLKCON_PCLK_SPI1 (1<<22) +#define S3C_CLKCON_PCLK_SPI0 (1<<21) +#define S3C_CLKCON_PCLK_HSIRX (1<<20) +#define S3C_CLKCON_PCLK_HSITX (1<<19) +#define S3C_CLKCON_PCLK_GPIO (1<<18) +#define S3C_CLKCON_PCLK_IIC (1<<17) +#define S3C_CLKCON_PCLK_IIS1 (1<<16) +#define S3C_CLKCON_PCLK_IIS0 (1<<15) +#define S3C_CLKCON_PCLK_AC97 (1<<14) +#define S3C_CLKCON_PCLK_TZPC (1<<13) +#define S3C_CLKCON_PCLK_TSADC (1<<12) +#define S3C_CLKCON_PCLK_KEYPAD (1<<11) +#define S3C_CLKCON_PCLK_IRDA (1<<10) +#define S3C_CLKCON_PCLK_PCM1 (1<<9) +#define S3C_CLKCON_PCLK_PCM0 (1<<8) +#define S3C_CLKCON_PCLK_PWM (1<<7) +#define S3C_CLKCON_PCLK_RTC (1<<6) +#define S3C_CLKCON_PCLK_WDT (1<<5) +#define S3C_CLKCON_PCLK_UART3 (1<<4) +#define S3C_CLKCON_PCLK_UART2 (1<<3) +#define S3C_CLKCON_PCLK_UART1 (1<<2) +#define S3C_CLKCON_PCLK_UART0 (1<<1) +#define S3C_CLKCON_PCLK_MFC (1<<0) + +/* SCLK GATE Registers */ +#define S3C_CLKCON_SCLK_UHOST (1<<30) +#define S3C_CLKCON_SCLK_MMC2_48 (1<<29) +#define S3C_CLKCON_SCLK_MMC1_48 (1<<28) +#define S3C_CLKCON_SCLK_MMC0_48 (1<<27) +#define S3C_CLKCON_SCLK_MMC2 (1<<26) +#define S3C_CLKCON_SCLK_MMC1 (1<<25) +#define S3C_CLKCON_SCLK_MMC0 (1<<24) +#define S3C_CLKCON_SCLK_SPI1_48 (1<<23) +#define S3C_CLKCON_SCLK_SPI0_48 (1<<22) +#define S3C_CLKCON_SCLK_SPI1 (1<<21) +#define S3C_CLKCON_SCLK_SPI0 (1<<20) +#define S3C_CLKCON_SCLK_DAC27 (1<<19) +#define S3C_CLKCON_SCLK_TV27 (1<<18) +#define S3C_CLKCON_SCLK_SCALER27 (1<<17) +#define S3C_CLKCON_SCLK_SCALER (1<<16) +#define S3C_CLKCON_SCLK_LCD27 (1<<15) +#define S3C_CLKCON_SCLK_LCD (1<<14) +#define S3C6400_CLKCON_SCLK_POST1_27 (1<<13) +#define S3C6410_CLKCON_FIMC (1<<13) +#define S3C_CLKCON_SCLK_POST0_27 (1<<12) +#define S3C6400_CLKCON_SCLK_POST1 (1<<11) +#define S3C6410_CLKCON_SCLK_AUDIO2 (1<<11) +#define S3C_CLKCON_SCLK_POST0 (1<<10) +#define S3C_CLKCON_SCLK_AUDIO1 (1<<9) +#define S3C_CLKCON_SCLK_AUDIO0 (1<<8) +#define S3C_CLKCON_SCLK_SECUR (1<<7) +#define S3C_CLKCON_SCLK_IRDA (1<<6) +#define S3C_CLKCON_SCLK_UART (1<<5) +#define S3C_CLKCON_SCLK_ONENAND (1<<4) +#define S3C_CLKCON_SCLK_MFC (1<<3) +#define S3C_CLKCON_SCLK_CAM (1<<2) +#define S3C_CLKCON_SCLK_JPEG (1<<1) + +/* CLKSRC */ + +#define S3C6400_CLKSRC_APLL_MOUT (1 << 0) +#define S3C6400_CLKSRC_MPLL_MOUT (1 << 1) +#define S3C6400_CLKSRC_EPLL_MOUT (1 << 2) +#define S3C6400_CLKSRC_APLL_MOUT_SHIFT (0) +#define S3C6400_CLKSRC_MPLL_MOUT_SHIFT (1) +#define S3C6400_CLKSRC_EPLL_MOUT_SHIFT (2) +#define S3C6400_CLKSRC_MFC (1 << 4) + +#define S3C6410_CLKSRC_TV27_MASK (0x1 << 31) +#define S3C6410_CLKSRC_TV27_SHIFT (31) +#define S3C6410_CLKSRC_DAC27_MASK (0x1 << 30) +#define S3C6410_CLKSRC_DAC27_SHIFT (30) +#define S3C6400_CLKSRC_SCALER_MASK (0x3 << 28) +#define S3C6400_CLKSRC_SCALER_SHIFT (28) +#define S3C6400_CLKSRC_LCD_MASK (0x3 << 26) +#define S3C6400_CLKSRC_LCD_SHIFT (26) +#define S3C6400_CLKSRC_IRDA_MASK (0x3 << 24) +#define S3C6400_CLKSRC_IRDA_SHIFT (24) +#define S3C6400_CLKSRC_MMC2_MASK (0x3 << 22) +#define S3C6400_CLKSRC_MMC2_SHIFT (22) +#define S3C6400_CLKSRC_MMC1_MASK (0x3 << 20) +#define S3C6400_CLKSRC_MMC1_SHIFT (20) +#define S3C6400_CLKSRC_MMC0_MASK (0x3 << 18) +#define S3C6400_CLKSRC_MMC0_SHIFT (18) +#define S3C6400_CLKSRC_SPI1_MASK (0x3 << 16) +#define S3C6400_CLKSRC_SPI1_SHIFT (16) +#define S3C6400_CLKSRC_SPI0_MASK (0x3 << 14) +#define S3C6400_CLKSRC_SPI0_SHIFT (14) +#define S3C6400_CLKSRC_UART_MASK (0x1 << 13) +#define S3C6400_CLKSRC_UART_SHIFT (13) +#define S3C6400_CLKSRC_AUDIO1_MASK (0x7 << 10) +#define S3C6400_CLKSRC_AUDIO1_SHIFT (10) +#define S3C6400_CLKSRC_AUDIO0_MASK (0x7 << 7) +#define S3C6400_CLKSRC_AUDIO0_SHIFT (7) +#define S3C6400_CLKSRC_UHOST_MASK (0x3 << 5) +#define S3C6400_CLKSRC_UHOST_SHIFT (5) + + +#endif /* _PLAT_REGS_CLOCK_H */ diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h b/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h new file mode 100644 index 00000000000..75b873d8280 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/regs-gpio.h @@ -0,0 +1,35 @@ +/* linux/arch/arm/plat-s3c64xx/include/mach/regs-gpio.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - GPIO register definitions + */ + +#ifndef __ASM_PLAT_S3C64XX_REGS_GPIO_H +#define __ASM_PLAT_S3C64XX_REGS_GPIO_H __FILE__ + +/* Base addresses for each of the banks */ + +#define S3C64XX_GPA_BASE (S3C64XX_VA_GPIO + 0x0000) +#define S3C64XX_GPB_BASE (S3C64XX_VA_GPIO + 0x0020) +#define S3C64XX_GPC_BASE (S3C64XX_VA_GPIO + 0x0040) +#define S3C64XX_GPD_BASE (S3C64XX_VA_GPIO + 0x0060) +#define S3C64XX_GPE_BASE (S3C64XX_VA_GPIO + 0x0080) +#define S3C64XX_GPF_BASE (S3C64XX_VA_GPIO + 0x00A0) +#define S3C64XX_GPG_BASE (S3C64XX_VA_GPIO + 0x00C0) +#define S3C64XX_GPH_BASE (S3C64XX_VA_GPIO + 0x00E0) +#define S3C64XX_GPI_BASE (S3C64XX_VA_GPIO + 0x0100) +#define S3C64XX_GPJ_BASE (S3C64XX_VA_GPIO + 0x0120) +#define S3C64XX_GPK_BASE (S3C64XX_VA_GPIO + 0x0800) +#define S3C64XX_GPL_BASE (S3C64XX_VA_GPIO + 0x0810) +#define S3C64XX_GPM_BASE (S3C64XX_VA_GPIO + 0x0820) +#define S3C64XX_GPN_BASE (S3C64XX_VA_GPIO + 0x0830) +#define S3C64XX_GPO_BASE (S3C64XX_VA_GPIO + 0x0140) +#define S3C64XX_GPP_BASE (S3C64XX_VA_GPIO + 0x0160) +#define S3C64XX_GPQ_BASE (S3C64XX_VA_GPIO + 0x0180) + +#endif /* __ASM_PLAT_S3C64XX_REGS_GPIO_H */ + diff --git a/arch/arm/plat-s3c64xx/include/plat/regs-sys.h b/arch/arm/plat-s3c64xx/include/plat/regs-sys.h new file mode 100644 index 00000000000..d8ed8291709 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/regs-sys.h @@ -0,0 +1,24 @@ +/* arch/arm/plat-s3c64xx/include/plat/regs-sys.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX system register definitions + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifndef __PLAT_REGS_SYS_H +#define __PLAT_REGS_SYS_H __FILE__ + +#define S3C_SYSREG(x) (S3C_VA_SYS + (x)) + +#define S3C64XX_OTHERS S3C_SYSREG(0x900) + +#define S3C64XX_OTHERS_USBMASK (1 << 16) + +#endif /* _PLAT_REGS_SYS_H */ diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6400.h b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h new file mode 100644 index 00000000000..571eaa2e54f --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/s3c6400.h @@ -0,0 +1,35 @@ +/* arch/arm/plat-s3c64xx/include/plat/s3c6400.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Header file for s3c6400 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +/* Common init code for S3C6400 related SoCs */ + +extern void s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no); +extern void s3c6400_register_clocks(void); +extern void s3c6400_setup_clocks(void); + +#ifdef CONFIG_CPU_S3C6400 + +extern int s3c6400_init(void); +extern void s3c6400_map_io(void); +extern void s3c6400_init_clocks(int xtal); + +#define s3c6400_init_uarts s3c6400_common_init_uarts + +#else +#define s3c6400_init_clocks NULL +#define s3c6400_init_uarts NULL +#define s3c6400_map_io NULL +#define s3c6400_init NULL +#endif + diff --git a/arch/arm/plat-s3c64xx/include/plat/s3c6410.h b/arch/arm/plat-s3c64xx/include/plat/s3c6410.h new file mode 100644 index 00000000000..50dcdd6f680 --- /dev/null +++ b/arch/arm/plat-s3c64xx/include/plat/s3c6410.h @@ -0,0 +1,29 @@ +/* arch/arm/plat-s3c64xx/include/plat/s3c6410.h + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Header file for s3c6410 cpu support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#ifdef CONFIG_CPU_S3C6410 + +extern int s3c6410_init(void); +extern void s3c6410_init_irq(void); +extern void s3c6410_map_io(void); +extern void s3c6410_init_clocks(int xtal); + +#define s3c6410_init_uarts s3c6400_common_init_uarts + +#else +#define s3c6410_init_clocks NULL +#define s3c6410_init_uarts NULL +#define s3c6410_map_io NULL +#define s3c6410_init NULL +#endif diff --git a/arch/arm/plat-s3c64xx/irq-eint.c b/arch/arm/plat-s3c64xx/irq-eint.c new file mode 100644 index 00000000000..8c01f9cd94b --- /dev/null +++ b/arch/arm/plat-s3c64xx/irq-eint.c @@ -0,0 +1,202 @@ +/* arch/arm/plat-s3c64xx/irq-eint.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - Interrupt handling for IRQ_EINT(x) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <asm/hardware/vic.h> + +#include <plat/regs-irqtype.h> + +#include <mach/map.h> +#include <plat/cpu.h> + +/* GPIO is 0x7F008xxx, */ +#define S3C64XX_GPIOREG(x) (S3C64XX_VA_GPIO + (x)) + +#define S3C64XX_EINT0CON0 S3C64XX_GPIOREG(0x900) +#define S3C64XX_EINT0CON1 S3C64XX_GPIOREG(0x904) +#define S3C64XX_EINT0FLTCON0 S3C64XX_GPIOREG(0x910) +#define S3C64XX_EINT0FLTCON1 S3C64XX_GPIOREG(0x914) +#define S3C64XX_EINT0FLTCON2 S3C64XX_GPIOREG(0x918) +#define S3C64XX_EINT0FLTCON3 S3C64XX_GPIOREG(0x91C) + +#define S3C64XX_EINT0MASK S3C64XX_GPIOREG(0x920) +#define S3C64XX_EINT0PEND S3C64XX_GPIOREG(0x924) + + +#define eint_offset(irq) ((irq) - IRQ_EINT(0)) +#define eint_irq_to_bit(irq) (1 << eint_offset(irq)) + +static inline void s3c_irq_eint_mask(unsigned int irq) +{ + u32 mask; + + mask = __raw_readl(S3C64XX_EINT0MASK); + mask |= eint_irq_to_bit(irq); + __raw_writel(mask, S3C64XX_EINT0MASK); +} + +static void s3c_irq_eint_unmask(unsigned int irq) +{ + u32 mask; + + mask = __raw_readl(S3C64XX_EINT0MASK); + mask |= eint_irq_to_bit(irq); + __raw_writel(mask, S3C64XX_EINT0MASK); +} + +static inline void s3c_irq_eint_ack(unsigned int irq) +{ + __raw_writel(eint_irq_to_bit(irq), S3C64XX_EINT0PEND); +} + +static void s3c_irq_eint_maskack(unsigned int irq) +{ + /* compiler should in-line these */ + s3c_irq_eint_mask(irq); + s3c_irq_eint_ack(irq); +} + +static int s3c_irq_eint_set_type(unsigned int irq, unsigned int type) +{ + int offs = eint_offset(irq); + int shift; + u32 ctrl, mask; + u32 newvalue = 0; + void __iomem *reg; + + if (offs > 27) + return -EINVAL; + + if (offs > 15) + reg = S3C64XX_EINT0CON0; + else + reg = S3C64XX_EINT0CON1; + + switch (type) { + case IRQ_TYPE_NONE: + printk(KERN_WARNING "No edge setting!\n"); + break; + + case IRQ_TYPE_EDGE_RISING: + newvalue = S3C2410_EXTINT_RISEEDGE; + break; + + case IRQ_TYPE_EDGE_FALLING: + newvalue = S3C2410_EXTINT_FALLEDGE; + break; + + case IRQ_TYPE_EDGE_BOTH: + newvalue = S3C2410_EXTINT_BOTHEDGE; + break; + + case IRQ_TYPE_LEVEL_LOW: + newvalue = S3C2410_EXTINT_LOWLEV; + break; + + case IRQ_TYPE_LEVEL_HIGH: + newvalue = S3C2410_EXTINT_HILEV; + break; + + default: + printk(KERN_ERR "No such irq type %d", type); + return -1; + } + + shift = (offs / 2) * 4; + mask = 0x7 << shift; + + ctrl = __raw_readl(reg); + ctrl &= ~mask; + ctrl |= newvalue << shift; + __raw_writel(ctrl, reg); + + return 0; +} + +static struct irq_chip s3c_irq_eint = { + .name = "s3c-eint", + .mask = s3c_irq_eint_mask, + .unmask = s3c_irq_eint_unmask, + .mask_ack = s3c_irq_eint_maskack, + .ack = s3c_irq_eint_ack, + .set_type = s3c_irq_eint_set_type, +}; + +/* s3c_irq_demux_eint + * + * This function demuxes the IRQ from the group0 external interrupts, + * from IRQ_EINT(0) to IRQ_EINT(27). It is designed to be inlined into + * the specific handlers s3c_irq_demux_eintX_Y. + */ +static inline void s3c_irq_demux_eint(unsigned int start, unsigned int end) +{ + u32 status = __raw_readl(S3C64XX_EINT0PEND); + u32 mask = __raw_readl(S3C64XX_EINT0MASK); + unsigned int irq; + + status &= ~mask; + status >>= start; + status &= (1 << (end - start + 1)) - 1; + + for (irq = IRQ_EINT(start); irq <= IRQ_EINT(end); irq++) { + if (status & 1) + generic_handle_irq(irq); + + status >>= 1; + } +} + +static void s3c_irq_demux_eint0_3(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_eint(0, 3); +} + +static void s3c_irq_demux_eint4_11(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_eint(4, 11); +} + +static void s3c_irq_demux_eint12_19(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_eint(12, 19); +} + +static void s3c_irq_demux_eint20_27(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_eint(20, 27); +} + +int __init s3c64xx_init_irq_eint(void) +{ + int irq; + + for (irq = IRQ_EINT(0); irq <= IRQ_EINT(27); irq++) { + set_irq_chip(irq, &s3c_irq_eint); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + + set_irq_chained_handler(IRQ_EINT0_3, s3c_irq_demux_eint0_3); + set_irq_chained_handler(IRQ_EINT4_11, s3c_irq_demux_eint4_11); + set_irq_chained_handler(IRQ_EINT12_19, s3c_irq_demux_eint12_19); + set_irq_chained_handler(IRQ_EINT20_27, s3c_irq_demux_eint20_27); + + return 0; +} + +arch_initcall(s3c64xx_init_irq_eint); diff --git a/arch/arm/plat-s3c64xx/irq.c b/arch/arm/plat-s3c64xx/irq.c new file mode 100644 index 00000000000..a94f1d5e819 --- /dev/null +++ b/arch/arm/plat-s3c64xx/irq.c @@ -0,0 +1,257 @@ +/* arch/arm/plat-s3c64xx/irq.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C64XX - Interrupt handling + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/interrupt.h> +#include <linux/irq.h> +#include <linux/io.h> + +#include <asm/hardware/vic.h> + +#include <mach/map.h> +#include <plat/regs-timer.h> +#include <plat/cpu.h> + +/* Timer interrupt handling */ + +static void s3c_irq_demux_timer(unsigned int base_irq, unsigned int sub_irq) +{ + generic_handle_irq(sub_irq); +} + +static void s3c_irq_demux_timer0(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_timer(irq, IRQ_TIMER0); +} + +static void s3c_irq_demux_timer1(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_timer(irq, IRQ_TIMER1); +} + +static void s3c_irq_demux_timer2(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_timer(irq, IRQ_TIMER2); +} + +static void s3c_irq_demux_timer3(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_timer(irq, IRQ_TIMER3); +} + +static void s3c_irq_demux_timer4(unsigned int irq, struct irq_desc *desc) +{ + s3c_irq_demux_timer(irq, IRQ_TIMER4); +} + +/* We assume the IRQ_TIMER0..IRQ_TIMER4 range is continuous. */ + +static void s3c_irq_timer_mask(unsigned int irq) +{ + u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); + + reg &= 0x1f; /* mask out pending interrupts */ + reg &= ~(1 << (irq - IRQ_TIMER0)); + __raw_writel(reg, S3C64XX_TINT_CSTAT); +} + +static void s3c_irq_timer_unmask(unsigned int irq) +{ + u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); + + reg &= 0x1f; /* mask out pending interrupts */ + reg |= 1 << (irq - IRQ_TIMER0); + __raw_writel(reg, S3C64XX_TINT_CSTAT); +} + +static void s3c_irq_timer_ack(unsigned int irq) +{ + u32 reg = __raw_readl(S3C64XX_TINT_CSTAT); + + reg &= 0x1f; + reg |= (1 << 5) << (irq - IRQ_TIMER0); + __raw_writel(reg, S3C64XX_TINT_CSTAT); +} + +static struct irq_chip s3c_irq_timer = { + .name = "s3c-timer", + .mask = s3c_irq_timer_mask, + .unmask = s3c_irq_timer_unmask, + .ack = s3c_irq_timer_ack, +}; + +struct uart_irq { + void __iomem *regs; + unsigned int base_irq; + unsigned int parent_irq; +}; + +/* Note, we make use of the fact that the parent IRQs, IRQ_UART[0..3] + * are consecutive when looking up the interrupt in the demux routines. + */ +static struct uart_irq uart_irqs[] = { + [0] = { + .regs = S3C_VA_UART0, + .base_irq = IRQ_S3CUART_BASE0, + .parent_irq = IRQ_UART0, + }, + [1] = { + .regs = S3C_VA_UART1, + .base_irq = IRQ_S3CUART_BASE1, + .parent_irq = IRQ_UART1, + }, + [2] = { + .regs = S3C_VA_UART2, + .base_irq = IRQ_S3CUART_BASE2, + .parent_irq = IRQ_UART2, + }, + [3] = { + .regs = S3C_VA_UART3, + .base_irq = IRQ_S3CUART_BASE3, + .parent_irq = IRQ_UART3, + }, +}; + +static inline void __iomem *s3c_irq_uart_base(unsigned int irq) +{ + struct uart_irq *uirq = get_irq_chip_data(irq); + return uirq->regs; +} + +static inline unsigned int s3c_irq_uart_bit(unsigned int irq) +{ + return irq & 3; +} + +/* UART interrupt registers, not worth adding to seperate include header */ +#define S3C64XX_UINTP 0x30 +#define S3C64XX_UINTSP 0x34 +#define S3C64XX_UINTM 0x38 + +static void s3c_irq_uart_mask(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + u32 reg; + + reg = __raw_readl(regs + S3C64XX_UINTM); + reg |= (1 << bit); + __raw_writel(reg, regs + S3C64XX_UINTM); +} + +static void s3c_irq_uart_maskack(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + u32 reg; + + reg = __raw_readl(regs + S3C64XX_UINTM); + reg |= (1 << bit); + __raw_writel(reg, regs + S3C64XX_UINTM); + __raw_writel(1 << bit, regs + S3C64XX_UINTP); +} + +static void s3c_irq_uart_unmask(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + u32 reg; + + reg = __raw_readl(regs + S3C64XX_UINTM); + reg &= ~(1 << bit); + __raw_writel(reg, regs + S3C64XX_UINTM); +} + +static void s3c_irq_uart_ack(unsigned int irq) +{ + void __iomem *regs = s3c_irq_uart_base(irq); + unsigned int bit = s3c_irq_uart_bit(irq); + + __raw_writel(1 << bit, regs + S3C64XX_UINTP); +} + +static void s3c_irq_demux_uart(unsigned int irq, struct irq_desc *desc) +{ + struct uart_irq *uirq = &uart_irqs[irq - IRQ_UART0]; + u32 pend = __raw_readl(uirq->regs + S3C64XX_UINTP); + int base = uirq->base_irq; + + if (pend & (1 << 0)) + generic_handle_irq(base); + if (pend & (1 << 1)) + generic_handle_irq(base + 1); + if (pend & (1 << 2)) + generic_handle_irq(base + 2); + if (pend & (1 << 3)) + generic_handle_irq(base + 3); +} + +static struct irq_chip s3c_irq_uart = { + .name = "s3c-uart", + .mask = s3c_irq_uart_mask, + .unmask = s3c_irq_uart_unmask, + .mask_ack = s3c_irq_uart_maskack, + .ack = s3c_irq_uart_ack, +}; + +static void __init s3c64xx_uart_irq(struct uart_irq *uirq) +{ + void *reg_base = uirq->regs; + unsigned int irq; + int offs; + + /* mask all interrupts at the start. */ + __raw_writel(0xf, reg_base + S3C64XX_UINTM); + + for (offs = 0; offs < 3; offs++) { + irq = uirq->base_irq + offs; + + set_irq_chip(irq, &s3c_irq_uart); + set_irq_chip_data(irq, uirq); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + + set_irq_chained_handler(uirq->parent_irq, s3c_irq_demux_uart); +} + +void __init s3c64xx_init_irq(u32 vic0_valid, u32 vic1_valid) +{ + int uart, irq; + + printk(KERN_DEBUG "%s: initialising interrupts\n", __func__); + + /* initialise the pair of VICs */ + vic_init(S3C_VA_VIC0, S3C_VIC0_BASE, vic0_valid); + vic_init(S3C_VA_VIC1, S3C_VIC1_BASE, vic1_valid); + + /* add the timer sub-irqs */ + + set_irq_chained_handler(IRQ_TIMER0_VIC, s3c_irq_demux_timer0); + set_irq_chained_handler(IRQ_TIMER1_VIC, s3c_irq_demux_timer1); + set_irq_chained_handler(IRQ_TIMER2_VIC, s3c_irq_demux_timer2); + set_irq_chained_handler(IRQ_TIMER3_VIC, s3c_irq_demux_timer3); + set_irq_chained_handler(IRQ_TIMER4_VIC, s3c_irq_demux_timer4); + + for (irq = IRQ_TIMER0; irq <= IRQ_TIMER4; irq++) { + set_irq_chip(irq, &s3c_irq_timer); + set_irq_handler(irq, handle_level_irq); + set_irq_flags(irq, IRQF_VALID); + } + + for (uart = 0; uart < ARRAY_SIZE(uart_irqs); uart++) + s3c64xx_uart_irq(&uart_irqs[uart]); +} + + diff --git a/arch/arm/plat-s3c64xx/s3c6400-clock.c b/arch/arm/plat-s3c64xx/s3c6400-clock.c new file mode 100644 index 00000000000..8d9a0cada66 --- /dev/null +++ b/arch/arm/plat-s3c64xx/s3c6400-clock.c @@ -0,0 +1,655 @@ +/* linux/arch/arm/plat-s3c64xx/s3c6400-clock.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C6400 based common clock support + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> +#include <linux/list.h> +#include <linux/errno.h> +#include <linux/err.h> +#include <linux/clk.h> +#include <linux/sysdev.h> +#include <linux/io.h> + +#include <mach/hardware.h> +#include <mach/map.h> + +#include <plat/cpu-freq.h> + +#include <plat/regs-clock.h> +#include <plat/clock.h> +#include <plat/cpu.h> +#include <plat/pll.h> + +/* fin_apll, fin_mpll and fin_epll are all the same clock, which we call + * ext_xtal_mux for want of an actual name from the manual. +*/ + +struct clk clk_ext_xtal_mux = { + .name = "ext_xtal", + .id = -1, +}; + +#define clk_fin_apll clk_ext_xtal_mux +#define clk_fin_mpll clk_ext_xtal_mux +#define clk_fin_epll clk_ext_xtal_mux + +#define clk_fout_mpll clk_mpll + +struct clk_sources { + unsigned int nr_sources; + struct clk **sources; +}; + +struct clksrc_clk { + struct clk clk; + unsigned int mask; + unsigned int shift; + + struct clk_sources *sources; + + unsigned int divider_shift; + void __iomem *reg_divider; +}; + +struct clk clk_fout_apll = { + .name = "fout_apll", + .id = -1, +}; + +static struct clk *clk_src_apll_list[] = { + [0] = &clk_fin_apll, + [1] = &clk_fout_apll, +}; + +static struct clk_sources clk_src_apll = { + .sources = clk_src_apll_list, + .nr_sources = ARRAY_SIZE(clk_src_apll_list), +}; + +struct clksrc_clk clk_mout_apll = { + .clk = { + .name = "mout_apll", + .id = -1, + }, + .shift = S3C6400_CLKSRC_APLL_MOUT_SHIFT, + .mask = S3C6400_CLKSRC_APLL_MOUT, + .sources = &clk_src_apll, +}; + +struct clk clk_fout_epll = { + .name = "fout_epll", + .id = -1, +}; + +static struct clk *clk_src_epll_list[] = { + [0] = &clk_fin_epll, + [1] = &clk_fout_epll, +}; + +static struct clk_sources clk_src_epll = { + .sources = clk_src_epll_list, + .nr_sources = ARRAY_SIZE(clk_src_epll_list), +}; + +struct clksrc_clk clk_mout_epll = { + .clk = { + .name = "mout_epll", + .id = -1, + }, + .shift = S3C6400_CLKSRC_EPLL_MOUT_SHIFT, + .mask = S3C6400_CLKSRC_EPLL_MOUT, + .sources = &clk_src_epll, +}; + +static struct clk *clk_src_mpll_list[] = { + [0] = &clk_fin_mpll, + [1] = &clk_fout_mpll, +}; + +static struct clk_sources clk_src_mpll = { + .sources = clk_src_mpll_list, + .nr_sources = ARRAY_SIZE(clk_src_mpll_list), +}; + +struct clksrc_clk clk_mout_mpll = { + .clk = { + .name = "mout_mpll", + .id = -1, + }, + .shift = S3C6400_CLKSRC_MPLL_MOUT_SHIFT, + .mask = S3C6400_CLKSRC_MPLL_MOUT, + .sources = &clk_src_mpll, +}; + +static unsigned long s3c64xx_clk_doutmpll_get_rate(struct clk *clk) +{ + unsigned long rate = clk_get_rate(clk->parent); + + printk(KERN_DEBUG "%s: parent is %ld\n", __func__, rate); + + if (__raw_readl(S3C_CLK_DIV0) & S3C6400_CLKDIV0_MPLL_MASK) + rate /= 2; + + return rate; +} + +struct clk clk_dout_mpll = { + .name = "dout_mpll", + .id = -1, + .parent = &clk_mout_mpll.clk, + .get_rate = s3c64xx_clk_doutmpll_get_rate, +}; + +static struct clk *clkset_spi_mmc_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + &clk_fin_epll, + &clk_27m, +}; + +static struct clk_sources clkset_spi_mmc = { + .sources = clkset_spi_mmc_list, + .nr_sources = ARRAY_SIZE(clkset_spi_mmc_list), +}; + +static struct clk *clkset_irda_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + NULL, + &clk_27m, +}; + +static struct clk_sources clkset_irda = { + .sources = clkset_irda_list, + .nr_sources = ARRAY_SIZE(clkset_irda_list), +}; + +static struct clk *clkset_uart_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + NULL, + NULL +}; + +static struct clk_sources clkset_uart = { + .sources = clkset_uart_list, + .nr_sources = ARRAY_SIZE(clkset_uart_list), +}; + +static struct clk *clkset_uhost_list[] = { + &clk_mout_epll.clk, + &clk_dout_mpll, + &clk_fin_epll, + &clk_48m, +}; + +static struct clk_sources clkset_uhost = { + .sources = clkset_uhost_list, + .nr_sources = ARRAY_SIZE(clkset_uhost_list), +}; + + +/* The peripheral clocks are all controlled via clocksource followed + * by an optional divider and gate stage. We currently roll this into + * one clock which hides the intermediate clock from the mux. + * + * Note, the JPEG clock can only be an even divider... + * + * The scaler and LCD clocks depend on the S3C64XX version, and also + * have a common parent divisor so are not included here. + */ + +static inline struct clksrc_clk *to_clksrc(struct clk *clk) +{ + return container_of(clk, struct clksrc_clk, clk); +} + +static unsigned long s3c64xx_getrate_clksrc(struct clk *clk) +{ + struct clksrc_clk *sclk = to_clksrc(clk); + unsigned long rate = clk_get_rate(clk->parent); + u32 clkdiv = __raw_readl(sclk->reg_divider); + + clkdiv >>= sclk->divider_shift; + clkdiv &= 0xf; + clkdiv++; + + rate /= clkdiv; + return rate; +} + +static int s3c64xx_setrate_clksrc(struct clk *clk, unsigned long rate) +{ + struct clksrc_clk *sclk = to_clksrc(clk); + void __iomem *reg = sclk->reg_divider; + unsigned int div; + u32 val; + + rate = clk_round_rate(clk, rate); + div = clk_get_rate(clk->parent) / rate; + + val = __raw_readl(reg); + val &= ~sclk->mask; + val |= (rate - 1) << sclk->shift; + __raw_writel(val, reg); + + return 0; +} + +static int s3c64xx_setparent_clksrc(struct clk *clk, struct clk *parent) +{ + struct clksrc_clk *sclk = to_clksrc(clk); + struct clk_sources *srcs = sclk->sources; + u32 clksrc = __raw_readl(S3C_CLK_SRC); + int src_nr = -1; + int ptr; + + for (ptr = 0; ptr < srcs->nr_sources; ptr++) + if (srcs->sources[ptr] == parent) { + src_nr = ptr; + break; + } + + if (src_nr >= 0) { + clksrc &= ~sclk->mask; + clksrc |= src_nr << sclk->shift; + + __raw_writel(clksrc, S3C_CLK_SRC); + return 0; + } + + return -EINVAL; +} + +static unsigned long s3c64xx_roundrate_clksrc(struct clk *clk, + unsigned long rate) +{ + unsigned long parent_rate = clk_get_rate(clk->parent); + int div; + + if (rate > parent_rate) + rate = parent_rate; + else { + div = rate / parent_rate; + + if (div == 0) + div = 1; + if (div > 16) + div = 16; + + rate = parent_rate / div; + } + + return rate; +} + +static struct clksrc_clk clk_mmc0 = { + .clk = { + .name = "mmc_bus", + .id = 0, + .ctrlbit = S3C_CLKCON_SCLK_MMC0, + .enable = s3c64xx_sclk_ctrl, + .set_parent = s3c64xx_setparent_clksrc, + .get_rate = s3c64xx_getrate_clksrc, + .set_rate = s3c64xx_setrate_clksrc, + .round_rate = s3c64xx_roundrate_clksrc, + }, + .shift = S3C6400_CLKSRC_MMC0_SHIFT, + .mask = S3C6400_CLKSRC_MMC0_MASK, + .sources = &clkset_spi_mmc, + .divider_shift = S3C6400_CLKDIV1_MMC0_SHIFT, + .reg_divider = S3C_CLK_DIV1, +}; + +static struct clksrc_clk clk_mmc1 = { + .clk = { + .name = "mmc_bus", + .id = 1, + .ctrlbit = S3C_CLKCON_SCLK_MMC1, + .enable = s3c64xx_sclk_ctrl, + .get_rate = s3c64xx_getrate_clksrc, + .set_rate = s3c64xx_setrate_clksrc, + .set_parent = s3c64xx_setparent_clksrc, + .round_rate = s3c64xx_roundrate_clksrc, + }, + .shift = S3C6400_CLKSRC_MMC1_SHIFT, + .mask = S3C6400_CLKSRC_MMC1_MASK, + .sources = &clkset_spi_mmc, + .divider_shift = S3C6400_CLKDIV1_MMC1_SHIFT, + .reg_divider = S3C_CLK_DIV1, +}; + +static struct clksrc_clk clk_mmc2 = { + .clk = { + .name = "mmc_bus", + .id = 2, + .ctrlbit = S3C_CLKCON_SCLK_MMC2, + .enable = s3c64xx_sclk_ctrl, + .get_rate = s3c64xx_getrate_clksrc, + .set_rate = s3c64xx_setrate_clksrc, + .set_parent = s3c64xx_setparent_clksrc, + .round_rate = s3c64xx_roundrate_clksrc, + }, + .shift = S3C6400_CLKSRC_MMC2_SHIFT, + .mask = S3C6400_CLKSRC_MMC2_MASK, + .sources = &clkset_spi_mmc, + .divider_shift = S3C6400_CLKDIV1_MMC2_SHIFT, + .reg_divider = S3C_CLK_DIV1, +}; + +static struct clksrc_clk clk_usbhost = { + .clk = { + .name = "usb-host-bus", + .id = -1, + .ctrlbit = S3C_CLKCON_SCLK_UHOST, + .enable = s3c64xx_sclk_ctrl, + .set_parent = s3c64xx_setparent_clksrc, + .get_rate = s3c64xx_getrate_clksrc, + .set_rate = s3c64xx_setrate_clksrc, + .round_rate = s3c64xx_roundrate_clksrc, + }, + .shift = S3C6400_CLKSRC_UHOST_SHIFT, + .mask = S3C6400_CLKSRC_UHOST_MASK, + .sources = &clkset_uhost, + .divider_shift = S3C6400_CLKDIV1_UHOST_SHIFT, + .reg_divider = S3C_CLK_DIV1, +}; + +static struct clksrc_clk clk_uart_uclk1 = { + .clk = { + .name = "uclk1", + .id = -1, + .ctrlbit = S3C_CLKCON_SCLK_UART, + .enable = s3c64xx_sclk_ctrl, + .set_parent = s3c64xx_setparent_clksrc, + .get_rate = s3c64xx_getrate_clksrc, + .set_rate = s3c64xx_setrate_clksrc, + .round_rate = s3c64xx_roundrate_clksrc, + }, + .shift = S3C6400_CLKSRC_UART_SHIFT, + .mask = S3C6400_CLKSRC_UART_MASK, + .sources = &clkset_uart, + .divider_shift = S3C6400_CLKDIV2_UART_SHIFT, + .reg_divider = S3C_CLK_DIV2, +}; + +/* Where does UCLK0 come from? */ + +static struct clksrc_clk clk_spi0 = { + .clk = { + .name = "spi-bus", + .id = 0, + .ctrlbit = S3C_CLKCON_SCLK_SPI0, + .enable = s3c64xx_sclk_ctrl, + .set_parent = s3c64xx_setparent_clksrc, + .get_rate = s3c64xx_getrate_clksrc, + .set_rate = s3c64xx_setrate_clksrc, + .round_rate = s3c64xx_roundrate_clksrc, + }, + .shift = S3C6400_CLKSRC_SPI0_SHIFT, + .mask = S3C6400_CLKSRC_SPI0_MASK, + .sources = &clkset_spi_mmc, + .divider_shift = S3C6400_CLKDIV2_SPI0_SHIFT, + .reg_divider = S3C_CLK_DIV2, +}; + +static struct clksrc_clk clk_spi1 = { + .clk = { + .name = "spi-bus", + .id = 1, + .ctrlbit = S3C_CLKCON_SCLK_SPI1, + .enable = s3c64xx_sclk_ctrl, + .set_parent = s3c64xx_setparent_clksrc, + .get_rate = s3c64xx_getrate_clksrc, + .set_rate = s3c64xx_setrate_clksrc, + .round_rate = s3c64xx_roundrate_clksrc, + }, + .shift = S3C6400_CLKSRC_SPI1_SHIFT, + .mask = S3C6400_CLKSRC_SPI1_MASK, + .sources = &clkset_spi_mmc, + .divider_shift = S3C6400_CLKDIV2_SPI1_SHIFT, + .reg_divider = S3C_CLK_DIV2, +}; + +static struct clk clk_iis_cd0 = { + .name = "iis_cdclk0", + .id = -1, +}; + +static struct clk clk_iis_cd1 = { + .name = "iis_cdclk1", + .id = -1, +}; + +static struct clk clk_pcm_cd = { + .name = "pcm_cdclk", + .id = -1, +}; + +static struct clk *clkset_audio0_list[] = { + [0] = &clk_mout_epll.clk, + [1] = &clk_dout_mpll, + [2] = &clk_fin_epll, + [3] = &clk_iis_cd0, + [4] = &clk_pcm_cd, +}; + +static struct clk_sources clkset_audio0 = { + .sources = clkset_audio0_list, + .nr_sources = ARRAY_SIZE(clkset_audio0_list), +}; + +static struct clksrc_clk clk_audio0 = { + .clk = { + .name = "audio-bus", + .id = 0, + .ctrlbit = S3C_CLKCON_SCLK_AUDIO0, + .enable = s3c64xx_sclk_ctrl, + .set_parent = s3c64xx_setparent_clksrc, + .get_rate = s3c64xx_getrate_clksrc, + .set_rate = s3c64xx_setrate_clksrc, + .round_rate = s3c64xx_roundrate_clksrc, + }, + .shift = S3C6400_CLKSRC_AUDIO0_SHIFT, + .mask = S3C6400_CLKSRC_AUDIO0_MASK, + .sources = &clkset_audio0, + .divider_shift = S3C6400_CLKDIV2_AUDIO0_SHIFT, + .reg_divider = S3C_CLK_DIV2, +}; + +static struct clk *clkset_audio1_list[] = { + [0] = &clk_mout_epll.clk, + [1] = &clk_dout_mpll, + [2] = &clk_fin_epll, + [3] = &clk_iis_cd1, + [4] = &clk_pcm_cd, +}; + +static struct clk_sources clkset_audio1 = { + .sources = clkset_audio1_list, + .nr_sources = ARRAY_SIZE(clkset_audio1_list), +}; + +static struct clksrc_clk clk_audio1 = { + .clk = { + .name = "audio-bus", + .id = 1, + .ctrlbit = S3C_CLKCON_SCLK_AUDIO1, + .enable = s3c64xx_sclk_ctrl, + .set_parent = s3c64xx_setparent_clksrc, + .get_rate = s3c64xx_getrate_clksrc, + .set_rate = s3c64xx_setrate_clksrc, + .round_rate = s3c64xx_roundrate_clksrc, + }, + .shift = S3C6400_CLKSRC_AUDIO1_SHIFT, + .mask = S3C6400_CLKSRC_AUDIO1_MASK, + .sources = &clkset_audio1, + .divider_shift = S3C6400_CLKDIV2_AUDIO1_SHIFT, + .reg_divider = S3C_CLK_DIV2, +}; + +static struct clksrc_clk clk_irda = { + .clk = { + .name = "irda-bus", + .id = 0, + .ctrlbit = S3C_CLKCON_SCLK_IRDA, + .enable = s3c64xx_sclk_ctrl, + .set_parent = s3c64xx_setparent_clksrc, + .get_rate = s3c64xx_getrate_clksrc, + .set_rate = s3c64xx_setrate_clksrc, + .round_rate = s3c64xx_roundrate_clksrc, + }, + .shift = S3C6400_CLKSRC_IRDA_SHIFT, + .mask = S3C6400_CLKSRC_IRDA_MASK, + .sources = &clkset_irda, + .divider_shift = S3C6400_CLKDIV2_IRDA_SHIFT, + .reg_divider = S3C_CLK_DIV2, +}; + +/* Clock initialisation code */ + +static struct clksrc_clk *init_parents[] = { + &clk_mout_apll, + &clk_mout_epll, + &clk_mout_mpll, + &clk_mmc0, + &clk_mmc1, + &clk_mmc2, + &clk_usbhost, + &clk_uart_uclk1, + &clk_spi0, + &clk_spi1, + &clk_audio0, + &clk_audio1, + &clk_irda, +}; + +static void __init_or_cpufreq s3c6400_set_clksrc(struct clksrc_clk *clk) +{ + struct clk_sources *srcs = clk->sources; + u32 clksrc = __raw_readl(S3C_CLK_SRC); + + clksrc &= clk->mask; + clksrc >>= clk->shift; + + if (clksrc > srcs->nr_sources || !srcs->sources[clksrc]) { + printk(KERN_ERR "%s: bad source %d\n", + clk->clk.name, clksrc); + return; + } + + clk->clk.parent = srcs->sources[clksrc]; + + printk(KERN_INFO "%s: source is %s (%d), rate is %ld\n", + clk->clk.name, clk->clk.parent->name, clksrc, + clk_get_rate(&clk->clk)); +} + +#define GET_DIV(clk, field) ((((clk) & field##_MASK) >> field##_SHIFT) + 1) + +void __init_or_cpufreq s3c6400_setup_clocks(void) +{ + struct clk *xtal_clk; + unsigned long xtal; + unsigned long fclk; + unsigned long hclk; + unsigned long hclk2; + unsigned long pclk; + unsigned long epll; + unsigned long apll; + unsigned long mpll; + unsigned int ptr; + u32 clkdiv0; + + printk(KERN_DEBUG "%s: registering clocks\n", __func__); + + clkdiv0 = __raw_readl(S3C_CLK_DIV0); + printk(KERN_DEBUG "%s: clkdiv0 = %08x\n", __func__, clkdiv0); + + xtal_clk = clk_get(NULL, "xtal"); + BUG_ON(IS_ERR(xtal_clk)); + + xtal = clk_get_rate(xtal_clk); + clk_put(xtal_clk); + + printk(KERN_DEBUG "%s: xtal is %ld\n", __func__, xtal); + + epll = s3c6400_get_epll(xtal); + mpll = s3c6400_get_pll(xtal, __raw_readl(S3C_MPLL_CON)); + apll = s3c6400_get_pll(xtal, __raw_readl(S3C_APLL_CON)); + + fclk = mpll; + + printk(KERN_INFO "S3C64XX: PLL settings, A=%ld, M=%ld, E=%ld\n", + apll, mpll, epll); + + hclk2 = mpll / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK2); + hclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_HCLK); + pclk = hclk2 / GET_DIV(clkdiv0, S3C6400_CLKDIV0_PCLK); + + printk(KERN_INFO "S3C64XX: HCLK2=%ld, HCLK=%ld, PCLK=%ld\n", + hclk2, hclk, pclk); + + clk_fout_mpll.rate = mpll; + clk_fout_epll.rate = epll; + clk_fout_apll.rate = apll; + + clk_h.rate = hclk; + clk_p.rate = pclk; + clk_f.rate = fclk; + + for (ptr = 0; ptr < ARRAY_SIZE(init_parents); ptr++) + s3c6400_set_clksrc(init_parents[ptr]); +} + +static struct clk *clks[] __initdata = { + &clk_ext_xtal_mux, + &clk_iis_cd0, + &clk_iis_cd1, + &clk_pcm_cd, + &clk_mout_epll.clk, + &clk_fout_epll, + &clk_mout_mpll.clk, + &clk_dout_mpll, + &clk_mmc0.clk, + &clk_mmc1.clk, + &clk_mmc2.clk, + &clk_usbhost.clk, + &clk_uart_uclk1.clk, + &clk_spi0.clk, + &clk_spi1.clk, + &clk_audio0.clk, + &clk_audio1.clk, + &clk_irda.clk, +}; + +void __init s3c6400_register_clocks(void) +{ + struct clk *clkp; + int ret; + int ptr; + + for (ptr = 0; ptr < ARRAY_SIZE(clks); ptr++) { + clkp = clks[ptr]; + ret = s3c24xx_register_clock(clkp); + if (ret < 0) { + printk(KERN_ERR "Failed to register clock %s (%d)\n", + clkp->name, ret); + } + } + + clk_mpll.parent = &clk_mout_mpll.clk; + clk_epll.parent = &clk_mout_epll.clk; +} diff --git a/arch/arm/plat-s3c64xx/s3c6400-init.c b/arch/arm/plat-s3c64xx/s3c6400-init.c new file mode 100644 index 00000000000..6c28f39df09 --- /dev/null +++ b/arch/arm/plat-s3c64xx/s3c6400-init.c @@ -0,0 +1,29 @@ +/* linux/arch/arm/plat-s3c64xx/s3c6400-init.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * S3C6400 - CPU initialisation (common with other S3C64XX chips) + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + */ + +#include <linux/kernel.h> +#include <linux/types.h> +#include <linux/init.h> + +#include <plat/cpu.h> +#include <plat/devs.h> +#include <plat/s3c6400.h> +#include <plat/s3c6410.h> + +/* uart registration process */ + +void __init s3c6400_common_init_uarts(struct s3c2410_uartcfg *cfg, int no) +{ + s3c24xx_init_uartdevs("s3c6400-uart", s3c64xx_uart_resources, cfg, no); +} diff --git a/arch/arm/plat-s3c64xx/setup-i2c0.c b/arch/arm/plat-s3c64xx/setup-i2c0.c new file mode 100644 index 00000000000..36448076372 --- /dev/null +++ b/arch/arm/plat-s3c64xx/setup-i2c0.c @@ -0,0 +1,31 @@ +/* linux/arch/arm/plat-s3c64xx/setup-i2c0.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Base S3C64XX I2C bus 0 gpio configuration + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> + +struct platform_device; /* don't need the contents */ + +#include <mach/gpio.h> +#include <plat/iic.h> +#include <plat/gpio-bank-b.h> +#include <plat/gpio-cfg.h> + +void s3c_i2c0_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S3C64XX_GPB(5), S3C64XX_GPB5_I2C_SCL0); + s3c_gpio_cfgpin(S3C64XX_GPB(6), S3C64XX_GPB6_I2C_SDA0); + s3c_gpio_setpull(S3C64XX_GPB(5), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S3C64XX_GPB(6), S3C_GPIO_PULL_UP); +} diff --git a/arch/arm/plat-s3c64xx/setup-i2c1.c b/arch/arm/plat-s3c64xx/setup-i2c1.c new file mode 100644 index 00000000000..bbe229bd90c --- /dev/null +++ b/arch/arm/plat-s3c64xx/setup-i2c1.c @@ -0,0 +1,31 @@ +/* linux/arch/arm/plat-s3c64xx/setup-i2c1.c + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * Base S3C64XX I2C bus 1 gpio configuration + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/kernel.h> +#include <linux/types.h> + +struct platform_device; /* don't need the contents */ + +#include <mach/gpio.h> +#include <plat/iic.h> +#include <plat/gpio-bank-b.h> +#include <plat/gpio-cfg.h> + +void s3c_i2c1_cfg_gpio(struct platform_device *dev) +{ + s3c_gpio_cfgpin(S3C64XX_GPB(2), S3C64XX_GPB2_I2C_SCL1); + s3c_gpio_cfgpin(S3C64XX_GPB(3), S3C64XX_GPB3_I2C_SDA1); + s3c_gpio_setpull(S3C64XX_GPB(2), S3C_GPIO_PULL_UP); + s3c_gpio_setpull(S3C64XX_GPB(3), S3C_GPIO_PULL_UP); +} diff --git a/drivers/i2c/busses/i2c-s3c2410.c b/drivers/i2c/busses/i2c-s3c2410.c index 1fac4e23313..fdebd930408 100644 --- a/drivers/i2c/busses/i2c-s3c2410.c +++ b/drivers/i2c/busses/i2c-s3c2410.c @@ -40,8 +40,8 @@ #include <asm/io.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c/regs-iic.h> -#include <asm/plat-s3c/iic.h> +#include <plat/regs-iic.h> +#include <plat/iic.h> /* i2c controller state */ diff --git a/drivers/mmc/host/s3cmci.c b/drivers/mmc/host/s3cmci.c index 3b2085b5776..fcc98a4cce3 100644 --- a/drivers/mmc/host/s3cmci.c +++ b/drivers/mmc/host/s3cmci.c @@ -25,7 +25,7 @@ #include <mach/regs-sdi.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c24xx/mci.h> +#include <plat/mci.h> #include "s3cmci.h" diff --git a/drivers/mtd/nand/s3c2410.c b/drivers/mtd/nand/s3c2410.c index 556139ed1fd..098f5162388 100644 --- a/drivers/mtd/nand/s3c2410.c +++ b/drivers/mtd/nand/s3c2410.c @@ -45,8 +45,8 @@ #include <asm/io.h> -#include <asm/plat-s3c/regs-nand.h> -#include <asm/plat-s3c/nand.h> +#include <plat/regs-nand.h> +#include <plat/nand.h> #ifdef CONFIG_MTD_NAND_S3C2410_HWECC static int hardware_ecc = 1; diff --git a/drivers/rtc/rtc-s3c.c b/drivers/rtc/rtc-s3c.c index f59277bbeda..7a568beba3f 100644 --- a/drivers/rtc/rtc-s3c.c +++ b/drivers/rtc/rtc-s3c.c @@ -26,7 +26,7 @@ #include <asm/uaccess.h> #include <asm/io.h> #include <asm/irq.h> -#include <asm/plat-s3c/regs-rtc.h> +#include <plat/regs-rtc.h> /* I have yet to find an S3C implementation with more than one * of these rtc blocks in */ diff --git a/drivers/serial/Kconfig b/drivers/serial/Kconfig index 579d63a81aa..b695ab3142d 100644 --- a/drivers/serial/Kconfig +++ b/drivers/serial/Kconfig @@ -447,7 +447,7 @@ config SERIAL_CLPS711X_CONSOLE config SERIAL_SAMSUNG tristate "Samsung SoC serial support" - depends on ARM && PLAT_S3C24XX + depends on ARM && PLAT_S3C select SERIAL_CORE help Support for the on-chip UARTs on the Samsung S3C24XX series CPUs, @@ -455,6 +455,16 @@ config SERIAL_SAMSUNG provide all of these ports, depending on how the serial port pins are configured. +config SERIAL_SAMSUNG_UARTS + int + depends on SERIAL_SAMSUNG + default 2 if ARCH_S3C2400 + default 4 if ARCH_S3C64XX || CPU_S3C2443 + default 3 + help + Select the number of available UART ports for the Samsung S3C + serial driver + config SERIAL_SAMSUNG_DEBUG bool "Samsung SoC serial debug" depends on SERIAL_SAMSUNG && DEBUG_LL @@ -508,7 +518,20 @@ config SERIAL_S3C2440 help Serial port support for the Samsung S3C2440 and S3C2442 SoC +config SERIAL_S3C24A0 + tristate "Samsung S3C24A0 Serial port support" + depends on SERIAL_SAMSUNG && CPU_S3C24A0 + default y if CPU_S3C24A0 + help + Serial port support for the Samsung S3C24A0 SoC +config SERIAL_S3C6400 + tristate "Samsung S3C6400/S3C6410 Serial port support" + depends on SERIAL_SAMSUNG && (CPU_S3C600 || CPU_S3C6410) + default y + help + Serial port support for the Samsung S3C6400 and S3C6410 + SoCs config SERIAL_DZ bool "DECstation DZ serial driver" diff --git a/drivers/serial/Makefile b/drivers/serial/Makefile index 0c17c8ddb19..dfe775ac45b 100644 --- a/drivers/serial/Makefile +++ b/drivers/serial/Makefile @@ -41,6 +41,8 @@ obj-$(CONFIG_SERIAL_S3C2400) += s3c2400.o obj-$(CONFIG_SERIAL_S3C2410) += s3c2410.o obj-$(CONFIG_SERIAL_S3C2412) += s3c2412.o obj-$(CONFIG_SERIAL_S3C2440) += s3c2440.o +obj-$(CONFIG_SERIAL_S3C24A0) += s3c24a0.o +obj-$(CONFIG_SERIAL_S3C6400) += s3c6400.o obj-$(CONFIG_SERIAL_IP22_ZILOG) += ip22zilog.o obj-$(CONFIG_SERIAL_MUX) += mux.o obj-$(CONFIG_SERIAL_68328) += 68328serial.o diff --git a/drivers/serial/s3c24a0.c b/drivers/serial/s3c24a0.c new file mode 100644 index 00000000000..ebf2fd3c8f7 --- /dev/null +++ b/drivers/serial/s3c24a0.c @@ -0,0 +1,118 @@ +/* linux/drivers/serial/s3c24a0.c + * + * Driver for Samsung S3C24A0 SoC onboard UARTs. + * + * Based on drivers/serial/s3c2410.c + * + * Author: Sandeep Patil <sandeep.patil@azingo.com> + * + * Ben Dooks, Copyright (c) 2003-2005,2008 Simtec Electronics + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/serial.h> +#include <linux/io.h> +#include <linux/irq.h> + +#include <mach/hardware.h> + +#include <plat/regs-serial.h> +#include <mach/regs-gpio.h> + +#include "samsung.h" + +static int s3c24a0_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + if (strcmp(clk->name, "uclk") == 0) + ucon |= S3C2410_UCON_UCLK; + else + ucon &= ~S3C2410_UCON_UCLK; + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + +static int s3c24a0_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + clk->divisor = 1; + clk->name = (ucon & S3C2410_UCON_UCLK) ? "uclk" : "pclk"; + + return 0; +} + +static int s3c24a0_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + dbg("s3c24a0_serial_resetport: port=%p (%08lx), cfg=%p\n", + port, port->mapbase, cfg); + + wr_regl(port, S3C2410_UCON, cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c24a0_uart_inf = { + .name = "Samsung S3C24A0 UART", + .type = PORT_S3C2410, + .fifosize = 16, + .rx_fifomask = S3C24A0_UFSTAT_RXMASK, + .rx_fifoshift = S3C24A0_UFSTAT_RXSHIFT, + .rx_fifofull = S3C24A0_UFSTAT_RXFULL, + .tx_fifofull = S3C24A0_UFSTAT_TXFULL, + .tx_fifomask = S3C24A0_UFSTAT_TXMASK, + .tx_fifoshift = S3C24A0_UFSTAT_TXSHIFT, + .get_clksrc = s3c24a0_serial_getsource, + .set_clksrc = s3c24a0_serial_setsource, + .reset_port = s3c24a0_serial_resetport, +}; + +static int s3c24a0_serial_probe(struct platform_device *dev) +{ + return s3c24xx_serial_probe(dev, &s3c24a0_uart_inf); +} + +static struct platform_driver s3c24a0_serial_drv = { + .probe = s3c24a0_serial_probe, + .remove = s3c24xx_serial_remove, + .driver = { + .name = "s3c24a0-uart", + .owner = THIS_MODULE, + }, +}; + +s3c24xx_console_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf); + +static int __init s3c24a0_serial_init(void) +{ + return s3c24xx_serial_init(&s3c24a0_serial_drv, &s3c24a0_uart_inf); +} + +static void __exit s3c24a0_serial_exit(void) +{ + platform_driver_unregister(&s3c24a0_serial_drv); +} + +module_init(s3c24a0_serial_init); +module_exit(s3c24a0_serial_exit); + diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c new file mode 100644 index 00000000000..06936d13393 --- /dev/null +++ b/drivers/serial/s3c6400.c @@ -0,0 +1,151 @@ +/* linux/drivers/serial/s3c6400.c + * + * Driver for Samsung S3C6400 and S3C6410 SoC onboard UARTs. + * + * Copyright 2008 Openmoko, Inc. + * Copyright 2008 Simtec Electronics + * Ben Dooks <ben@simtec.co.uk> + * http://armlinux.simtec.co.uk/ + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. +*/ + +#include <linux/module.h> +#include <linux/ioport.h> +#include <linux/io.h> +#include <linux/platform_device.h> +#include <linux/init.h> +#include <linux/serial_core.h> +#include <linux/serial.h> + +#include <asm/irq.h> +#include <mach/hardware.h> + +#include <plat/regs-serial.h> + +#include "samsung.h" + +static int s3c6400_serial_setsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + if (strcmp(clk->name, "uclk0") == 0) { + ucon &= ~S3C6400_UCON_CLKMASK; + ucon |= S3C6400_UCON_UCLK0; + } else if (strcmp(clk->name, "uclk1") == 0) + ucon |= S3C6400_UCON_UCLK1; + else if (strcmp(clk->name, "pclk") == 0) { + /* See notes about transitioning from UCLK to PCLK */ + ucon &= ~S3C6400_UCON_UCLK0; + } else { + printk(KERN_ERR "unknown clock source %s\n", clk->name); + return -EINVAL; + } + + wr_regl(port, S3C2410_UCON, ucon); + return 0; +} + + +static int s3c6400_serial_getsource(struct uart_port *port, + struct s3c24xx_uart_clksrc *clk) +{ + u32 ucon = rd_regl(port, S3C2410_UCON); + + clk->divisor = 1; + + switch (ucon & S3C6400_UCON_CLKMASK) { + case S3C6400_UCON_UCLK0: + clk->name = "uclk0"; + break; + + case S3C6400_UCON_UCLK1: + clk->name = "uclk1"; + break; + + case S3C6400_UCON_PCLK: + case S3C6400_UCON_PCLK2: + clk->name = "pclk"; + break; + } + + return 0; +} + +static int s3c6400_serial_resetport(struct uart_port *port, + struct s3c2410_uartcfg *cfg) +{ + unsigned long ucon = rd_regl(port, S3C2410_UCON); + + dbg("s3c6400_serial_resetport: port=%p (%08lx), cfg=%p\n", + port, port->mapbase, cfg); + + /* ensure we don't change the clock settings... */ + + ucon &= S3C6400_UCON_CLKMASK; + + wr_regl(port, S3C2410_UCON, ucon | cfg->ucon); + wr_regl(port, S3C2410_ULCON, cfg->ulcon); + + /* reset both fifos */ + + wr_regl(port, S3C2410_UFCON, cfg->ufcon | S3C2410_UFCON_RESETBOTH); + wr_regl(port, S3C2410_UFCON, cfg->ufcon); + + return 0; +} + +static struct s3c24xx_uart_info s3c6400_uart_inf = { + .name = "Samsung S3C6400 UART", + .type = PORT_S3C6400, + .fifosize = 64, + .rx_fifomask = S3C2440_UFSTAT_RXMASK, + .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, + .rx_fifofull = S3C2440_UFSTAT_RXFULL, + .tx_fifofull = S3C2440_UFSTAT_TXFULL, + .tx_fifomask = S3C2440_UFSTAT_TXMASK, + .tx_fifoshift = S3C2440_UFSTAT_TXSHIFT, + .get_clksrc = s3c6400_serial_getsource, + .set_clksrc = s3c6400_serial_setsource, + .reset_port = s3c6400_serial_resetport, +}; + +/* device management */ + +static int s3c6400_serial_probe(struct platform_device *dev) +{ + dbg("s3c6400_serial_probe: dev=%p\n", dev); + return s3c24xx_serial_probe(dev, &s3c6400_uart_inf); +} + +static struct platform_driver s3c6400_serial_drv = { + .probe = s3c6400_serial_probe, + .remove = s3c24xx_serial_remove, + .driver = { + .name = "s3c6400-uart", + .owner = THIS_MODULE, + }, +}; + +s3c24xx_console_init(&s3c6400_serial_drv, &s3c6400_uart_inf); + +static int __init s3c6400_serial_init(void) +{ + return s3c24xx_serial_init(&s3c6400_serial_drv, &s3c6400_uart_inf); +} + +static void __exit s3c6400_serial_exit(void) +{ + platform_driver_unregister(&s3c6400_serial_drv); +} + +module_init(s3c6400_serial_init); +module_exit(s3c6400_serial_exit); + +MODULE_DESCRIPTION("Samsung S3C6400,S3C6410 SoC Serial port driver"); +MODULE_AUTHOR("Ben Dooks <ben@simtec.co.uk>"); +MODULE_LICENSE("GPL v2"); +MODULE_ALIAS("platform:s3c6400-uart"); diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index 1e219d3d035..dc7e7ebad23 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -42,13 +42,14 @@ #include <linux/serial.h> #include <linux/delay.h> #include <linux/clk.h> +#include <linux/cpufreq.h> #include <asm/irq.h> #include <mach/hardware.h> +#include <mach/map.h> #include <plat/regs-serial.h> -#include <mach/regs-gpio.h> #include "samsung.h" @@ -58,19 +59,6 @@ #define S3C24XX_SERIAL_MAJOR 204 #define S3C24XX_SERIAL_MINOR 64 -/* we can support 3 uarts, but not always use them */ - -#ifdef CONFIG_CPU_S3C2400 -#define NR_PORTS (2) -#else -#define NR_PORTS (3) -#endif - -/* port irq numbers */ - -#define TX_IRQ(port) ((port)->irq + 1) -#define RX_IRQ(port) ((port)->irq) - /* macros to change one thing to another */ #define tx_enabled(port) ((port)->unused[0]) @@ -136,8 +124,10 @@ static void s3c24xx_serial_rx_disable(struct uart_port *port) static void s3c24xx_serial_stop_tx(struct uart_port *port) { + struct s3c24xx_uart_port *ourport = to_ourport(port); + if (tx_enabled(port)) { - disable_irq(TX_IRQ(port)); + disable_irq(ourport->tx_irq); tx_enabled(port) = 0; if (port->flags & UPF_CONS_FLOW) s3c24xx_serial_rx_enable(port); @@ -146,11 +136,13 @@ static void s3c24xx_serial_stop_tx(struct uart_port *port) static void s3c24xx_serial_start_tx(struct uart_port *port) { + struct s3c24xx_uart_port *ourport = to_ourport(port); + if (!tx_enabled(port)) { if (port->flags & UPF_CONS_FLOW) s3c24xx_serial_rx_disable(port); - enable_irq(TX_IRQ(port)); + enable_irq(ourport->tx_irq); tx_enabled(port) = 1; } } @@ -158,9 +150,11 @@ static void s3c24xx_serial_start_tx(struct uart_port *port) static void s3c24xx_serial_stop_rx(struct uart_port *port) { + struct s3c24xx_uart_port *ourport = to_ourport(port); + if (rx_enabled(port)) { dbg("s3c24xx_serial_stop_rx: port=%p\n", port); - disable_irq(RX_IRQ(port)); + disable_irq(ourport->rx_irq); rx_enabled(port) = 0; } } @@ -384,13 +378,13 @@ static void s3c24xx_serial_shutdown(struct uart_port *port) struct s3c24xx_uart_port *ourport = to_ourport(port); if (ourport->tx_claimed) { - free_irq(TX_IRQ(port), ourport); + free_irq(ourport->tx_irq, ourport); tx_enabled(port) = 0; ourport->tx_claimed = 0; } if (ourport->rx_claimed) { - free_irq(RX_IRQ(port), ourport); + free_irq(ourport->rx_irq, ourport); ourport->rx_claimed = 0; rx_enabled(port) = 0; } @@ -407,12 +401,11 @@ static int s3c24xx_serial_startup(struct uart_port *port) rx_enabled(port) = 1; - ret = request_irq(RX_IRQ(port), - s3c24xx_serial_rx_chars, 0, + ret = request_irq(ourport->rx_irq, s3c24xx_serial_rx_chars, 0, s3c24xx_serial_portname(port), ourport); if (ret != 0) { - printk(KERN_ERR "cannot get irq %d\n", RX_IRQ(port)); + printk(KERN_ERR "cannot get irq %d\n", ourport->rx_irq); return ret; } @@ -422,12 +415,11 @@ static int s3c24xx_serial_startup(struct uart_port *port) tx_enabled(port) = 1; - ret = request_irq(TX_IRQ(port), - s3c24xx_serial_tx_chars, 0, + ret = request_irq(ourport->tx_irq, s3c24xx_serial_tx_chars, 0, s3c24xx_serial_portname(port), ourport); if (ret) { - printk(KERN_ERR "cannot get irq %d\n", TX_IRQ(port)); + printk(KERN_ERR "cannot get irq %d\n", ourport->tx_irq); goto err; } @@ -452,6 +444,8 @@ static void s3c24xx_serial_pm(struct uart_port *port, unsigned int level, { struct s3c24xx_uart_port *ourport = to_ourport(port); + ourport->pm_level = level; + switch (level) { case 3: if (!IS_ERR(ourport->baudclk) && ourport->baudclk != NULL) @@ -661,6 +655,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, ourport->clksrc = clksrc; ourport->baudclk = clk; + ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; } switch (termios->c_cflag & CSIZE) { @@ -752,6 +747,8 @@ static const char *s3c24xx_serial_type(struct uart_port *port) return "S3C2440"; case PORT_S3C2412: return "S3C2412"; + case PORT_S3C6400: + return "S3C6400/10"; default: return NULL; } @@ -827,14 +824,14 @@ static struct uart_ops s3c24xx_serial_ops = { static struct uart_driver s3c24xx_uart_drv = { .owner = THIS_MODULE, .dev_name = "s3c2410_serial", - .nr = 3, + .nr = CONFIG_SERIAL_SAMSUNG_UARTS, .cons = S3C24XX_SERIAL_CONSOLE, .driver_name = S3C24XX_SERIAL_NAME, .major = S3C24XX_SERIAL_MAJOR, .minor = S3C24XX_SERIAL_MINOR, }; -static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = { +static struct s3c24xx_uart_port s3c24xx_serial_ports[CONFIG_SERIAL_SAMSUNG_UARTS] = { [0] = { .port = { .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[0].port.lock), @@ -859,7 +856,7 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = { .line = 1, } }, -#if NR_PORTS > 2 +#if CONFIG_SERIAL_SAMSUNG_UARTS > 2 [2] = { .port = { @@ -872,6 +869,20 @@ static struct s3c24xx_uart_port s3c24xx_serial_ports[NR_PORTS] = { .flags = UPF_BOOT_AUTOCONF, .line = 2, } + }, +#endif +#if CONFIG_SERIAL_SAMSUNG_UARTS > 3 + [3] = { + .port = { + .lock = __SPIN_LOCK_UNLOCKED(s3c24xx_serial_ports[3].port.lock), + .iotype = UPIO_MEM, + .irq = IRQ_S3CUART_RX3, + .uartclk = 0, + .fifosize = 16, + .ops = &s3c24xx_serial_ops, + .flags = UPF_BOOT_AUTOCONF, + .line = 3, + } } #endif }; @@ -890,6 +901,93 @@ static inline int s3c24xx_serial_resetport(struct uart_port *port, return (info->reset_port)(port, cfg); } + +#ifdef CONFIG_CPU_FREQ + +static int s3c24xx_serial_cpufreq_transition(struct notifier_block *nb, + unsigned long val, void *data) +{ + struct s3c24xx_uart_port *port; + struct uart_port *uport; + + port = container_of(nb, struct s3c24xx_uart_port, freq_transition); + uport = &port->port; + + /* check to see if port is enabled */ + + if (port->pm_level != 0) + return 0; + + /* try and work out if the baudrate is changing, we can detect + * a change in rate, but we do not have support for detecting + * a disturbance in the clock-rate over the change. + */ + + if (IS_ERR(port->clk)) + goto exit; + + if (port->baudclk_rate == clk_get_rate(port->clk)) + goto exit; + + if (val == CPUFREQ_PRECHANGE) { + /* we should really shut the port down whilst the + * frequency change is in progress. */ + + } else if (val == CPUFREQ_POSTCHANGE) { + struct ktermios *termios; + struct tty_struct *tty; + + if (uport->info == NULL) { + printk(KERN_WARNING "%s: info NULL\n", __func__); + goto exit; + } + + tty = uport->info->port.tty; + + if (tty == NULL) { + printk(KERN_WARNING "%s: tty is NULL\n", __func__); + goto exit; + } + + termios = tty->termios; + + if (termios == NULL) { + printk(KERN_WARNING "%s: no termios?\n", __func__); + goto exit; + } + + s3c24xx_serial_set_termios(uport, termios, NULL); + } + + exit: + return 0; +} + +static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) +{ + port->freq_transition.notifier_call = s3c24xx_serial_cpufreq_transition; + + return cpufreq_register_notifier(&port->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} + +static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) +{ + cpufreq_unregister_notifier(&port->freq_transition, + CPUFREQ_TRANSITION_NOTIFIER); +} + +#else +static inline int s3c24xx_serial_cpufreq_register(struct s3c24xx_uart_port *port) +{ + return 0; +} + +static inline void s3c24xx_serial_cpufreq_deregister(struct s3c24xx_uart_port *port) +{ +} +#endif + /* s3c24xx_serial_init_port * * initialise a single serial port from the platform device given @@ -914,8 +1012,11 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, if (port->mapbase != 0) return 0; - if (cfg->hwport > 3) - return -EINVAL; + if (cfg->hwport > CONFIG_SERIAL_SAMSUNG_UARTS) { + printk(KERN_ERR "%s: port %d bigger than %d\n", __func__, + cfg->hwport, CONFIG_SERIAL_SAMSUNG_UARTS); + return -ERANGE; + } /* setup info for port */ port->dev = &platdev->dev; @@ -943,18 +1044,26 @@ static int s3c24xx_serial_init_port(struct s3c24xx_uart_port *ourport, dbg("resource %p (%lx..%lx)\n", res, res->start, res->end); - port->mapbase = res->start; - port->membase = S3C24XX_VA_UART + (res->start - S3C24XX_PA_UART); + port->mapbase = res->start; + port->membase = S3C_VA_UART + res->start - (S3C_PA_UART & 0xfff00000); ret = platform_get_irq(platdev, 0); if (ret < 0) port->irq = 0; - else + else { port->irq = ret; + ourport->rx_irq = ret; + ourport->tx_irq = ret + 1; + } + + ret = platform_get_irq(platdev, 1); + if (ret > 0) + ourport->tx_irq = ret; ourport->clk = clk_get(&platdev->dev, "uart"); - dbg("port: map=%08x, mem=%08x, irq=%d, clock=%ld\n", - port->mapbase, port->membase, port->irq, port->uartclk); + dbg("port: map=%08x, mem=%08x, irq=%d (%d,%d), clock=%ld\n", + port->mapbase, port->membase, port->irq, + ourport->rx_irq, ourport->tx_irq, port->uartclk); /* reset the fifos (and setup the uart) */ s3c24xx_serial_resetport(port, cfg); @@ -1002,6 +1111,10 @@ int s3c24xx_serial_probe(struct platform_device *dev, if (ret < 0) printk(KERN_ERR "%s: failed to add clksrc attr.\n", __func__); + ret = s3c24xx_serial_cpufreq_register(ourport); + if (ret < 0) + dev_err(&dev->dev, "failed to add cpufreq notifier\n"); + return 0; probe_err: @@ -1015,6 +1128,7 @@ int s3c24xx_serial_remove(struct platform_device *dev) struct uart_port *port = s3c24xx_dev_to_port(&dev->dev); if (port) { + s3c24xx_serial_cpufreq_deregister(to_ourport(port)); device_remove_file(&dev->dev, &dev_attr_clock_source); uart_remove_one_port(&s3c24xx_uart_drv, port); } @@ -1219,7 +1333,7 @@ static int s3c24xx_serial_init_ports(struct s3c24xx_uart_info *info) platdev_ptr = s3c24xx_uart_devs; - for (i = 0; i < NR_PORTS; i++, ptr++, platdev_ptr++) { + for (i = 0; i < CONFIG_SERIAL_SAMSUNG_UARTS; i++, ptr++, platdev_ptr++) { s3c24xx_serial_init_port(ptr, info, *platdev_ptr); } @@ -1240,7 +1354,7 @@ s3c24xx_serial_console_setup(struct console *co, char *options) /* is this a valid port */ - if (co->index == -1 || co->index >= NR_PORTS) + if (co->index == -1 || co->index >= CONFIG_SERIAL_SAMSUNG_UARTS) co->index = 0; port = &s3c24xx_serial_ports[co->index].port; diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h index 5c92ebbe7d9..571d6b90d20 100644 --- a/drivers/serial/samsung.h +++ b/drivers/serial/samsung.h @@ -33,12 +33,21 @@ struct s3c24xx_uart_info { struct s3c24xx_uart_port { unsigned char rx_claimed; unsigned char tx_claimed; + unsigned int pm_level; + unsigned long baudclk_rate; + + unsigned int rx_irq; + unsigned int tx_irq; struct s3c24xx_uart_info *info; struct s3c24xx_uart_clksrc *clksrc; struct clk *clk; struct clk *baudclk; struct uart_port port; + +#ifdef CONFIG_CPU_FREQ + struct notifier_block freq_transition; +#endif }; /* conversion functions */ diff --git a/drivers/spi/spi_s3c24xx.c b/drivers/spi/spi_s3c24xx.c index c252cbac00f..256d18395a2 100644 --- a/drivers/spi/spi_s3c24xx.c +++ b/drivers/spi/spi_s3c24xx.c @@ -28,7 +28,7 @@ #include <mach/hardware.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c24xx/regs-spi.h> +#include <plat/regs-spi.h> #include <mach/spi.h> struct s3c24xx_spi { diff --git a/drivers/usb/gadget/s3c2410_udc.c b/drivers/usb/gadget/s3c2410_udc.c index 00ba06b4475..8d8d6516598 100644 --- a/drivers/usb/gadget/s3c2410_udc.c +++ b/drivers/usb/gadget/s3c2410_udc.c @@ -53,8 +53,8 @@ #include <mach/hardware.h> #include <mach/regs-gpio.h> -#include <asm/plat-s3c24xx/regs-udc.h> -#include <asm/plat-s3c24xx/udc.h> +#include <plat/regs-udc.h> +#include <plat/udc.h> #include "s3c2410_udc.h" diff --git a/drivers/watchdog/s3c2410_wdt.c b/drivers/watchdog/s3c2410_wdt.c index f7f6ce82a5e..e31925ee834 100644 --- a/drivers/watchdog/s3c2410_wdt.c +++ b/drivers/watchdog/s3c2410_wdt.c @@ -42,7 +42,7 @@ #undef S3C_VA_WATCHDOG #define S3C_VA_WATCHDOG (0) -#include <asm/plat-s3c/regs-watchdog.h> +#include <plat/regs-watchdog.h> #define PFX "s3c2410-wdt: " diff --git a/include/linux/serial_core.h b/include/linux/serial_core.h index e27f216361f..17514b81b18 100644 --- a/include/linux/serial_core.h +++ b/include/linux/serial_core.h @@ -155,6 +155,8 @@ #define PORT_SC26XX 82 +#define PORT_S3C6400 83 + #ifdef __KERNEL__ #include <linux/compiler.h> diff --git a/sound/soc/s3c24xx/s3c2443-ac97.c b/sound/soc/s3c24xx/s3c2443-ac97.c index 19c5c3cf5d8..c473a3b97b5 100644 --- a/sound/soc/s3c24xx/s3c2443-ac97.c +++ b/sound/soc/s3c24xx/s3c2443-ac97.c @@ -28,7 +28,7 @@ #include <sound/soc.h> #include <mach/hardware.h> -#include <asm/plat-s3c/regs-ac97.h> +#include <plat/regs-ac97.h> #include <mach/regs-gpio.h> #include <mach/regs-clock.h> #include <mach/audio.h> |