diff options
79 files changed, 2226 insertions, 488 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index c3b215970f7..1f02d96a5db 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -636,7 +636,7 @@ P: Dirk Opfer M: dirk@opfer-online.de S: Maintained -ARM/PALMTX,PALMT5,PALMLD SUPPORT +ARM/PALMTX,PALMT5,PALMLD,PALMTE2 SUPPORT P: Marek Vasut M: marek.vasut@gmail.com W: http://hackndev.com @@ -3057,7 +3057,7 @@ S: Supported MULTIMEDIA CARD (MMC), SECURE DIGITAL (SD) AND SDIO SUBSYSTEM P: Pierre Ossman -M: drzeus-mmc@drzeus.cx +M: pierre@ossman.eu L: linux-kernel@vger.kernel.org S: Maintained @@ -3939,7 +3939,7 @@ S: Maintained SECURE DIGITAL HOST CONTROLLER INTERFACE (SDHCI) DRIVER P: Pierre Ossman -M: drzeus-sdhci@drzeus.cx +M: pierre@ossman.eu L: sdhci-devel@lists.ossman.eu S: Maintained @@ -4926,7 +4926,7 @@ S: Maintained W83L51xD SD/MMC CARD INTERFACE DRIVER P: Pierre Ossman -M: drzeus-wbsd@drzeus.cx +M: pierre@ossman.eu L: linux-kernel@vger.kernel.org S: Maintained diff --git a/arch/arm/configs/magician_defconfig b/arch/arm/configs/magician_defconfig index 82428c2f234..f56837f69ca 100644 --- a/arch/arm/configs/magician_defconfig +++ b/arch/arm/configs/magician_defconfig @@ -1183,7 +1183,11 @@ CONFIG_RTC_INTF_DEV=y CONFIG_RTC_DRV_SA1100=y # CONFIG_RTC_DRV_PXA is not set # CONFIG_DMADEVICES is not set -# CONFIG_REGULATOR is not set +CONFIG_REGULATOR=y +# CONFIG_REGULATOR_DEBUG is not set +# CONFIG_REGULATOR_FIXED_VOLTAGE is not set +# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set +CONFIG_REGULATOR_BQ24022=y # CONFIG_UIO is not set # CONFIG_STAGING is not set diff --git a/arch/arm/include/asm/sizes.h b/arch/arm/include/asm/sizes.h index c10d1aa4b48..ada93a8fc2e 100644 --- a/arch/arm/include/asm/sizes.h +++ b/arch/arm/include/asm/sizes.h @@ -32,6 +32,7 @@ #define SZ_4K 0x00001000 #define SZ_8K 0x00002000 #define SZ_16K 0x00004000 +#define SZ_32K 0x00008000 #define SZ_64K 0x00010000 #define SZ_128K 0x00020000 #define SZ_256K 0x00040000 diff --git a/arch/arm/mach-at91/include/mach/board.h b/arch/arm/mach-at91/include/mach/board.h index 793fe7b25f3..e6afff849b8 100644 --- a/arch/arm/mach-at91/include/mach/board.h +++ b/arch/arm/mach-at91/include/mach/board.h @@ -87,7 +87,7 @@ extern void __init at91_add_device_eth(struct at91_eth_data *data); /* USB Host */ struct at91_usbh_data { u8 ports; /* number of ports on root hub */ - u8 vbus_pin[]; /* port power-control pin */ + u8 vbus_pin[2]; /* port power-control pin */ }; extern void __init at91_add_device_usbh(struct at91_usbh_data *data); diff --git a/arch/arm/mach-omap1/clock.c b/arch/arm/mach-omap1/clock.c index dafe4f71d15..336e51dc612 100644 --- a/arch/arm/mach-omap1/clock.c +++ b/arch/arm/mach-omap1/clock.c @@ -590,27 +590,28 @@ static void omap1_init_ext_clk(struct clk * clk) static int omap1_clk_enable(struct clk *clk) { int ret = 0; + if (clk->usecount++ == 0) { - if (likely(clk->parent)) { + if (clk->parent) { ret = omap1_clk_enable(clk->parent); - - if (unlikely(ret != 0)) { - clk->usecount--; - return ret; - } + if (ret) + goto err; if (clk->flags & CLOCK_NO_IDLE_PARENT) omap1_clk_deny_idle(clk->parent); } ret = clk->ops->enable(clk); - - if (unlikely(ret != 0) && clk->parent) { - omap1_clk_disable(clk->parent); - clk->usecount--; + if (ret) { + if (clk->parent) + omap1_clk_disable(clk->parent); + goto err; } } + return ret; +err: + clk->usecount--; return ret; } diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 96a2006cb59..3e66d9099ea 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -343,6 +343,15 @@ config ARCH_PXA_PALM bool "PXA based Palm PDAs" select HAVE_PWM +config MACH_PALMTE2 + bool "Palm Tungsten|E2" + default y + depends on ARCH_PXA_PALM + select PXA25x + help + Say Y here if you intend to run this kernel on a Palm Tungsten|E2 + handheld computer. + config MACH_PALMT5 bool "Palm Tungsten|T5" default y diff --git a/arch/arm/mach-pxa/Makefile b/arch/arm/mach-pxa/Makefile index c80e1bac494..682dbf4e14b 100644 --- a/arch/arm/mach-pxa/Makefile +++ b/arch/arm/mach-pxa/Makefile @@ -57,6 +57,7 @@ obj-$(CONFIG_MACH_E740) += e740.o obj-$(CONFIG_MACH_E750) += e750.o obj-$(CONFIG_MACH_E400) += e400.o obj-$(CONFIG_MACH_E800) += e800.o +obj-$(CONFIG_MACH_PALMTE2) += palmte2.o obj-$(CONFIG_MACH_PALMT5) += palmt5.o obj-$(CONFIG_MACH_PALMTX) += palmtx.o obj-$(CONFIG_MACH_PALMLD) += palmld.o diff --git a/arch/arm/mach-pxa/cm-x2xx.c b/arch/arm/mach-pxa/cm-x2xx.c index 117b5435f8d..b50ef39eabf 100644 --- a/arch/arm/mach-pxa/cm-x2xx.c +++ b/arch/arm/mach-pxa/cm-x2xx.c @@ -121,7 +121,7 @@ static inline void cmx2xx_init_dm9000(void) {} /* UCB1400 touchscreen controller */ #if defined(CONFIG_TOUCHSCREEN_UCB1400) || defined(CONFIG_TOUCHSCREEN_UCB1400_MODULE) static struct platform_device cmx2xx_ts_device = { - .name = "ucb1400_ts", + .name = "ucb1400_core", .id = -1, }; diff --git a/arch/arm/mach-pxa/colibri-pxa300.c b/arch/arm/mach-pxa/colibri-pxa300.c index 10c2eaf9323..7c9c34c19ae 100644 --- a/arch/arm/mach-pxa/colibri-pxa300.c +++ b/arch/arm/mach-pxa/colibri-pxa300.c @@ -15,7 +15,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/gpio.h> -#include <net/ax88796.h> +#include <linux/interrupt.h> #include <asm/mach-types.h> #include <asm/sizes.h> @@ -32,12 +32,13 @@ #if defined(CONFIG_AX88796) #define COLIBRI_ETH_IRQ_GPIO mfp_to_gpio(GPIO26_GPIO) + /* * Asix AX88796 Ethernet */ static struct ax_plat_data colibri_asix_platdata = { - .flags = AXFLG_MAC_FROMDEV, - .wordlength = 2 + .flags = 0, /* defined later */ + .wordlength = 2, }; static struct resource colibri_asix_resource[] = { @@ -49,7 +50,7 @@ static struct resource colibri_asix_resource[] = { [1] = { .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; @@ -70,8 +71,8 @@ static mfp_cfg_t colibri_pxa300_eth_pin_config[] __initdata = { static void __init colibri_pxa300_init_eth(void) { + colibri_pxa3xx_init_eth(&colibri_asix_platdata); pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa300_eth_pin_config)); - set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING); platform_device_register(&asix_device); } #else diff --git a/arch/arm/mach-pxa/colibri-pxa320.c b/arch/arm/mach-pxa/colibri-pxa320.c index 55b74a7a615..a18d37b3c5e 100644 --- a/arch/arm/mach-pxa/colibri-pxa320.c +++ b/arch/arm/mach-pxa/colibri-pxa320.c @@ -15,7 +15,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/gpio.h> -#include <net/ax88796.h> +#include <linux/interrupt.h> #include <asm/mach-types.h> #include <asm/sizes.h> @@ -38,8 +38,8 @@ * Asix AX88796 Ethernet */ static struct ax_plat_data colibri_asix_platdata = { - .flags = AXFLG_MAC_FROMDEV, - .wordlength = 2 + .flags = 0, /* defined later */ + .wordlength = 2, }; static struct resource colibri_asix_resource[] = { @@ -51,7 +51,7 @@ static struct resource colibri_asix_resource[] = { [1] = { .start = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), .end = gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), - .flags = IORESOURCE_IRQ + .flags = IORESOURCE_IRQ | IRQF_TRIGGER_FALLING, } }; @@ -72,8 +72,8 @@ static mfp_cfg_t colibri_pxa320_eth_pin_config[] __initdata = { static void __init colibri_pxa320_init_eth(void) { + colibri_pxa3xx_init_eth(&colibri_asix_platdata); pxa3xx_mfp_config(ARRAY_AND_SIZE(colibri_pxa320_eth_pin_config)); - set_irq_type(gpio_to_irq(COLIBRI_ETH_IRQ_GPIO), IRQ_TYPE_EDGE_FALLING); platform_device_register(&asix_device); } #else diff --git a/arch/arm/mach-pxa/colibri-pxa3xx.c b/arch/arm/mach-pxa/colibri-pxa3xx.c index 12d0afc54aa..ea34e34f8cd 100644 --- a/arch/arm/mach-pxa/colibri-pxa3xx.c +++ b/arch/arm/mach-pxa/colibri-pxa3xx.c @@ -14,6 +14,7 @@ #include <linux/kernel.h> #include <linux/platform_device.h> #include <linux/gpio.h> +#include <linux/etherdevice.h> #include <asm/mach-types.h> #include <mach/hardware.h> #include <asm/sizes.h> @@ -28,6 +29,40 @@ #include "generic.h" #include "devices.h" +#if defined(CONFIG_AX88796) +#define ETHER_ADDR_LEN 6 +static u8 ether_mac_addr[ETHER_ADDR_LEN]; + +void __init colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data) +{ + int i; + u64 serial = ((u64) system_serial_high << 32) | system_serial_low; + + /* + * If the bootloader passed in a serial boot tag, which contains a + * valid ethernet MAC, pass it to the interface. Toradex ships the + * modules with their own bootloader which provides a valid MAC + * this way. + */ + + for (i = 0; i < ETHER_ADDR_LEN; i++) { + ether_mac_addr[i] = serial & 0xff; + serial >>= 8; + } + + if (is_valid_ether_addr(ether_mac_addr)) { + plat_data->flags |= AXFLG_MAC_FROMPLATFORM; + plat_data->mac_addr = ether_mac_addr; + printk(KERN_INFO "%s(): taking MAC from serial boot tag\n", + __func__); + } else { + plat_data->flags |= AXFLG_MAC_FROMDEV; + printk(KERN_INFO "%s(): no valid serial boot tag found, " + "taking MAC from device\n", __func__); + } +} +#endif + #if defined(CONFIG_MMC_PXA) || defined(CONFIG_MMC_PXA_MODULE) static int mmc_detect_pin; diff --git a/arch/arm/mach-pxa/csb701.c b/arch/arm/mach-pxa/csb701.c index 4a2a2952c37..5a221a49ea4 100644 --- a/arch/arm/mach-pxa/csb701.c +++ b/arch/arm/mach-pxa/csb701.c @@ -5,6 +5,8 @@ #include <linux/input.h> #include <linux/leds.h> +#include <asm/mach-types.h> + static struct gpio_keys_button csb701_buttons[] = { { .code = 0x7, @@ -54,6 +56,9 @@ static struct platform_device *devices[] __initdata = { static int __init csb701_init(void) { + if (!machine_is_csb726()) + return -ENODEV; + return platform_add_devices(devices, ARRAY_SIZE(devices)); } diff --git a/arch/arm/mach-pxa/e740.c b/arch/arm/mach-pxa/e740.c index 07500a04fd8..a36fc17f671 100644 --- a/arch/arm/mach-pxa/e740.c +++ b/arch/arm/mach-pxa/e740.c @@ -29,6 +29,7 @@ #include <mach/udc.h> #include <mach/irda.h> #include <mach/irqs.h> +#include <mach/audio.h> #include "generic.h" #include "eseries.h" @@ -197,6 +198,7 @@ static void __init e740_init(void) eseries_get_tmio_gpios(); platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_udc_info(&e7xx_udc_mach_info); + pxa_set_ac97_info(NULL); e7xx_irda_init(); pxa_set_ficp_info(&e7xx_ficp_platform_data); } diff --git a/arch/arm/mach-pxa/e750.c b/arch/arm/mach-pxa/e750.c index 6126c04e02b..1d00110590e 100644 --- a/arch/arm/mach-pxa/e750.c +++ b/arch/arm/mach-pxa/e750.c @@ -28,6 +28,7 @@ #include <mach/udc.h> #include <mach/irda.h> #include <mach/irqs.h> +#include <mach/audio.h> #include "generic.h" #include "eseries.h" @@ -198,6 +199,7 @@ static void __init e750_init(void) eseries_get_tmio_gpios(); platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_udc_info(&e7xx_udc_mach_info); + pxa_set_ac97_info(NULL); e7xx_irda_init(); pxa_set_ficp_info(&e7xx_ficp_platform_data); } diff --git a/arch/arm/mach-pxa/e800.c b/arch/arm/mach-pxa/e800.c index 74ab09812a7..9866c7b9e78 100644 --- a/arch/arm/mach-pxa/e800.c +++ b/arch/arm/mach-pxa/e800.c @@ -27,6 +27,7 @@ #include <mach/eseries-gpio.h> #include <mach/udc.h> #include <mach/irqs.h> +#include <mach/audio.h> #include "generic.h" #include "eseries.h" @@ -199,6 +200,7 @@ static void __init e800_init(void) eseries_get_tmio_gpios(); platform_add_devices(devices, ARRAY_SIZE(devices)); pxa_set_udc_info(&e800_udc_mach_info); + pxa_set_ac97_info(NULL); } MACHINE_START(E800, "Toshiba e800") diff --git a/arch/arm/mach-pxa/em-x270.c b/arch/arm/mach-pxa/em-x270.c index 920dfb8d36d..67611dadb44 100644 --- a/arch/arm/mach-pxa/em-x270.c +++ b/arch/arm/mach-pxa/em-x270.c @@ -25,8 +25,10 @@ #include <linux/regulator/machine.h> #include <linux/spi/spi.h> #include <linux/spi/tdo24m.h> +#include <linux/spi/libertas_spi.h> #include <linux/power_supply.h> #include <linux/apm-emulation.h> +#include <linux/delay.h> #include <media/soc_camera.h> @@ -62,6 +64,8 @@ #define GPIO93_CAM_RESET (93) #define GPIO41_ETHIRQ (41) #define EM_X270_ETHIRQ IRQ_GPIO(GPIO41_ETHIRQ) +#define GPIO115_WLAN_PWEN (115) +#define GPIO19_WLAN_STRAP (19) static int mmc_cd; static int nand_rb; @@ -159,8 +163,8 @@ static unsigned long common_pin_config[] = { GPIO57_SSP1_TXD, /* SSP2 */ - GPIO19_SSP2_SCLK, - GPIO14_SSP2_SFRM, + GPIO19_GPIO, /* SSP2 clock is used as GPIO for Libertas pin-strap */ + GPIO14_GPIO, GPIO89_SSP2_TXD, GPIO88_SSP2_RXD, @@ -648,20 +652,86 @@ static struct tdo24m_platform_data em_x270_tdo24m_pdata = { .model = TDO35S, }; +static struct pxa2xx_spi_master em_x270_spi_2_info = { + .num_chipselect = 1, + .enable_dma = 1, +}; + +static struct pxa2xx_spi_chip em_x270_libertas_chip = { + .rx_threshold = 1, + .tx_threshold = 1, + .timeout = 1000, +}; + +static unsigned long em_x270_libertas_pin_config[] = { + /* SSP2 */ + GPIO19_SSP2_SCLK, + GPIO14_GPIO, + GPIO89_SSP2_TXD, + GPIO88_SSP2_RXD, +}; + +static int em_x270_libertas_setup(struct spi_device *spi) +{ + int err = gpio_request(GPIO115_WLAN_PWEN, "WLAN PWEN"); + if (err) + return err; + + gpio_direction_output(GPIO19_WLAN_STRAP, 1); + mdelay(100); + + pxa2xx_mfp_config(ARRAY_AND_SIZE(em_x270_libertas_pin_config)); + + gpio_direction_output(GPIO115_WLAN_PWEN, 0); + mdelay(100); + gpio_set_value(GPIO115_WLAN_PWEN, 1); + mdelay(100); + + spi->bits_per_word = 16; + spi_setup(spi); + + return 0; +} + +static int em_x270_libertas_teardown(struct spi_device *spi) +{ + gpio_set_value(GPIO115_WLAN_PWEN, 0); + gpio_free(GPIO115_WLAN_PWEN); + + return 0; +} + +struct libertas_spi_platform_data em_x270_libertas_pdata = { + .use_dummy_writes = 1, + .gpio_cs = 14, + .setup = em_x270_libertas_setup, + .teardown = em_x270_libertas_teardown, +}; + static struct spi_board_info em_x270_spi_devices[] __initdata = { { - .modalias = "tdo24m", - .max_speed_hz = 1000000, - .bus_num = 1, - .chip_select = 0, - .controller_data = &em_x270_tdo24m_chip, - .platform_data = &em_x270_tdo24m_pdata, + .modalias = "tdo24m", + .max_speed_hz = 1000000, + .bus_num = 1, + .chip_select = 0, + .controller_data = &em_x270_tdo24m_chip, + .platform_data = &em_x270_tdo24m_pdata, + }, + { + .modalias = "libertas_spi", + .max_speed_hz = 13000000, + .bus_num = 2, + .irq = IRQ_GPIO(116), + .chip_select = 0, + .controller_data = &em_x270_libertas_chip, + .platform_data = &em_x270_libertas_pdata, }, }; static void __init em_x270_init_spi(void) { pxa2xx_set_spi_info(1, &em_x270_spi_info); + pxa2xx_set_spi_info(2, &em_x270_spi_2_info); spi_register_board_info(ARRAY_AND_SIZE(em_x270_spi_devices)); } #else diff --git a/arch/arm/mach-pxa/include/mach/colibri.h b/arch/arm/mach-pxa/include/mach/colibri.h index 3f2a01d6a03..90230c6f992 100644 --- a/arch/arm/mach-pxa/include/mach/colibri.h +++ b/arch/arm/mach-pxa/include/mach/colibri.h @@ -1,5 +1,8 @@ #ifndef _COLIBRI_H_ #define _COLIBRI_H_ + +#include <net/ax88796.h> + /* * common settings for all modules */ @@ -16,6 +19,10 @@ extern void colibri_pxa3xx_init_lcd(int bl_pin); static inline void colibri_pxa3xx_init_lcd(int) {} #endif +#if defined(CONFIG_AX88796) +extern void colibri_pxa3xx_init_eth(struct ax_plat_data *plat_data); +#endif + /* physical memory regions */ #define COLIBRI_SDRAM_BASE 0xa0000000 /* SDRAM region */ diff --git a/arch/arm/mach-pxa/include/mach/magician.h b/arch/arm/mach-pxa/include/mach/magician.h index 82a399f3f9f..20ef37d4a9a 100644 --- a/arch/arm/mach-pxa/include/mach/magician.h +++ b/arch/arm/mach-pxa/include/mach/magician.h @@ -27,7 +27,7 @@ #define GPIO22_MAGICIAN_VIBRA_EN 22 #define GPIO26_MAGICIAN_GSM_POWER 26 #define GPIO27_MAGICIAN_USBC_PUEN 27 -#define GPIO30_MAGICIAN_nCHARGE_EN 30 +#define GPIO30_MAGICIAN_BQ24022_nCHARGE_EN 30 #define GPIO37_MAGICIAN_KEY_HANGUP 37 #define GPIO38_MAGICIAN_KEY_CONTACTS 38 #define GPIO40_MAGICIAN_GSM_OUT2 40 @@ -98,7 +98,7 @@ #define EGPIO_MAGICIAN_UNKNOWN_WAVEDEV_DLL MAGICIAN_EGPIO(2, 2) #define EGPIO_MAGICIAN_FLASH_VPP MAGICIAN_EGPIO(2, 3) #define EGPIO_MAGICIAN_BL_POWER2 MAGICIAN_EGPIO(2, 4) -#define EGPIO_MAGICIAN_CHARGE_EN MAGICIAN_EGPIO(2, 5) +#define EGPIO_MAGICIAN_BQ24022_ISET2 MAGICIAN_EGPIO(2, 5) #define EGPIO_MAGICIAN_GSM_POWER MAGICIAN_EGPIO(2, 7) /* input */ diff --git a/arch/arm/mach-pxa/include/mach/palmld.h b/arch/arm/mach-pxa/include/mach/palmld.h index 7c295a48d78..fb13c82ad6d 100644 --- a/arch/arm/mach-pxa/include/mach/palmld.h +++ b/arch/arm/mach-pxa/include/mach/palmld.h @@ -87,6 +87,7 @@ #define PALMLD_IDE_SIZE 0x00100000 #define PALMLD_PHYS_IO_START 0x40000000 +#define PALMLD_STR_BASE 0xa0200000 /* BATTERY */ #define PALMLD_BAT_MAX_VOLTAGE 4000 /* 4.00V maximum voltage */ diff --git a/arch/arm/mach-pxa/include/mach/palmt5.h b/arch/arm/mach-pxa/include/mach/palmt5.h index 94db2881f04..052bfe788ad 100644 --- a/arch/arm/mach-pxa/include/mach/palmt5.h +++ b/arch/arm/mach-pxa/include/mach/palmt5.h @@ -59,6 +59,7 @@ /* Various addresses */ #define PALMT5_PHYS_RAM_START 0xa0000000 #define PALMT5_PHYS_IO_START 0x40000000 +#define PALMT5_STR_BASE 0xa0200000 /* TOUCHSCREEN */ #define AC97_LINK_FRAME 21 diff --git a/arch/arm/mach-pxa/include/mach/palmte2.h b/arch/arm/mach-pxa/include/mach/palmte2.h new file mode 100644 index 00000000000..12361341f9d --- /dev/null +++ b/arch/arm/mach-pxa/include/mach/palmte2.h @@ -0,0 +1,68 @@ +/* + * GPIOs and interrupts for Palm Tungsten|E2 Handheld Computer + * + * Author: + * Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + */ + +#ifndef _INCLUDE_PALMTE2_H_ +#define _INCLUDE_PALMTE2_H_ + +/** HERE ARE GPIOs **/ + +/* GPIOs */ +#define GPIO_NR_PALMTE2_POWER_DETECT 9 +#define GPIO_NR_PALMTE2_HOTSYNC_BUTTON_N 4 +#define GPIO_NR_PALMTE2_EARPHONE_DETECT 15 + +/* SD/MMC */ +#define GPIO_NR_PALMTE2_SD_DETECT_N 10 +#define GPIO_NR_PALMTE2_SD_POWER 55 +#define GPIO_NR_PALMTE2_SD_READONLY 51 + +/* IRDA - disable GPIO connected to SD pin of tranceiver (TFBS4710?) ? */ +#define GPIO_NR_PALMTE2_IR_DISABLE 48 + +/* USB */ +#define GPIO_NR_PALMTE2_USB_DETECT_N 35 +#define GPIO_NR_PALMTE2_USB_PULLUP 53 + +/* LCD/BACKLIGHT */ +#define GPIO_NR_PALMTE2_BL_POWER 56 +#define GPIO_NR_PALMTE2_LCD_POWER 37 + +/* KEYS */ +#define GPIO_NR_PALMTE2_KEY_NOTES 5 +#define GPIO_NR_PALMTE2_KEY_TASKS 7 +#define GPIO_NR_PALMTE2_KEY_CALENDAR 11 +#define GPIO_NR_PALMTE2_KEY_CONTACTS 13 +#define GPIO_NR_PALMTE2_KEY_CENTER 14 +#define GPIO_NR_PALMTE2_KEY_LEFT 19 +#define GPIO_NR_PALMTE2_KEY_RIGHT 20 +#define GPIO_NR_PALMTE2_KEY_DOWN 21 +#define GPIO_NR_PALMTE2_KEY_UP 22 + +/** HERE ARE INIT VALUES **/ + +/* BACKLIGHT */ +#define PALMTE2_MAX_INTENSITY 0xFE +#define PALMTE2_DEFAULT_INTENSITY 0x7E +#define PALMTE2_LIMIT_MASK 0x7F +#define PALMTE2_PRESCALER 0x3F +#define PALMTE2_PERIOD_NS 3500 + +/* BATTERY */ +#define PALMTE2_BAT_MAX_VOLTAGE 4000 /* 4.00v current voltage */ +#define PALMTE2_BAT_MIN_VOLTAGE 3550 /* 3.55v critical voltage */ +#define PALMTE2_BAT_MAX_CURRENT 0 /* unknokn */ +#define PALMTE2_BAT_MIN_CURRENT 0 /* unknown */ +#define PALMTE2_BAT_MAX_CHARGE 1 /* unknown */ +#define PALMTE2_BAT_MIN_CHARGE 1 /* unknown */ +#define PALMTE2_MAX_LIFE_MINS 360 /* on-life in minutes */ + +#endif diff --git a/arch/arm/mach-pxa/include/mach/palmtx.h b/arch/arm/mach-pxa/include/mach/palmtx.h index 1e8bccbda51..9f7d62fb4cb 100644 --- a/arch/arm/mach-pxa/include/mach/palmtx.h +++ b/arch/arm/mach-pxa/include/mach/palmtx.h @@ -78,6 +78,8 @@ #define PALMTX_PHYS_RAM_START 0xa0000000 #define PALMTX_PHYS_IO_START 0x40000000 +#define PALMTX_STR_BASE 0xa0200000 + #define PALMTX_PHYS_FLASH_START PXA_CS0_PHYS /* ChipSelect 0 */ #define PALMTX_PHYS_NAND_START PXA_CS1_PHYS /* ChipSelect 1 */ diff --git a/arch/arm/mach-pxa/magician.c b/arch/arm/mach-pxa/magician.c index deeea1c2782..c899bbd94dc 100644 --- a/arch/arm/mach-pxa/magician.c +++ b/arch/arm/mach-pxa/magician.c @@ -25,6 +25,8 @@ #include <linux/mtd/physmap.h> #include <linux/pda_power.h> #include <linux/pwm_backlight.h> +#include <linux/regulator/bq24022.h> +#include <linux/regulator/machine.h> #include <linux/usb/gpio_vbus.h> #include <mach/hardware.h> @@ -552,33 +554,7 @@ static struct platform_device gpio_vbus = { static int power_supply_init(struct device *dev) { - int ret; - - ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC"); - if (ret) - goto err_cs_ac; - ret = gpio_request(EGPIO_MAGICIAN_CABLE_STATE_USB, "CABLE_STATE_USB"); - if (ret) - goto err_cs_usb; - ret = gpio_request(EGPIO_MAGICIAN_CHARGE_EN, "CHARGE_EN"); - if (ret) - goto err_chg_en; - ret = gpio_request(GPIO30_MAGICIAN_nCHARGE_EN, "nCHARGE_EN"); - if (!ret) - ret = gpio_direction_output(GPIO30_MAGICIAN_nCHARGE_EN, 0); - if (ret) - goto err_nchg_en; - - return 0; - -err_nchg_en: - gpio_free(EGPIO_MAGICIAN_CHARGE_EN); -err_chg_en: - gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB); -err_cs_usb: - gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC); -err_cs_ac: - return ret; + return gpio_request(EGPIO_MAGICIAN_CABLE_STATE_AC, "CABLE_STATE_AC"); } static int magician_is_ac_online(void) @@ -586,22 +562,8 @@ static int magician_is_ac_online(void) return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_AC); } -static int magician_is_usb_online(void) -{ - return gpio_get_value(EGPIO_MAGICIAN_CABLE_STATE_USB); -} - -static void magician_set_charge(int flags) -{ - gpio_set_value(GPIO30_MAGICIAN_nCHARGE_EN, !flags); - gpio_set_value(EGPIO_MAGICIAN_CHARGE_EN, flags); -} - static void power_supply_exit(struct device *dev) { - gpio_free(GPIO30_MAGICIAN_nCHARGE_EN); - gpio_free(EGPIO_MAGICIAN_CHARGE_EN); - gpio_free(EGPIO_MAGICIAN_CABLE_STATE_USB); gpio_free(EGPIO_MAGICIAN_CABLE_STATE_AC); } @@ -612,8 +574,6 @@ static char *magician_supplicants[] = { static struct pda_power_pdata power_supply_info = { .init = power_supply_init, .is_ac_online = magician_is_ac_online, - .is_usb_online = magician_is_usb_online, - .set_charge = magician_set_charge, .exit = power_supply_exit, .supplied_to = magician_supplicants, .num_supplicants = ARRAY_SIZE(magician_supplicants), @@ -646,6 +606,43 @@ static struct platform_device power_supply = { .num_resources = ARRAY_SIZE(power_supply_resources), }; +/* + * Battery charger + */ + +static struct regulator_consumer_supply bq24022_consumers[] = { + { + .dev = &gpio_vbus.dev, + .supply = "vbus_draw", + }, + { + .dev = &power_supply.dev, + .supply = "ac_draw", + }, +}; + +static struct regulator_init_data bq24022_init_data = { + .constraints = { + .max_uA = 500000, + .valid_ops_mask = REGULATOR_CHANGE_CURRENT, + }, + .num_consumer_supplies = ARRAY_SIZE(bq24022_consumers), + .consumer_supplies = bq24022_consumers, +}; + +static struct bq24022_mach_info bq24022_info = { + .gpio_nce = GPIO30_MAGICIAN_BQ24022_nCHARGE_EN, + .gpio_iset2 = EGPIO_MAGICIAN_BQ24022_ISET2, + .init_data = &bq24022_init_data, +}; + +static struct platform_device bq24022 = { + .name = "bq24022", + .id = -1, + .dev = { + .platform_data = &bq24022_info, + }, +}; /* * MMC/SD @@ -756,6 +753,7 @@ static struct platform_device *devices[] __initdata = { &egpio, &backlight, &pasic3, + &bq24022, &gpio_vbus, &power_supply, &strataflash, diff --git a/arch/arm/mach-pxa/mioa701.c b/arch/arm/mach-pxa/mioa701.c index 97c93a7a285..9203b069b35 100644 --- a/arch/arm/mach-pxa/mioa701.c +++ b/arch/arm/mach-pxa/mioa701.c @@ -50,6 +50,7 @@ #include <mach/pxa27x-udc.h> #include <mach/i2c.h> #include <mach/camera.h> +#include <mach/audio.h> #include <media/soc_camera.h> #include <mach/mioa701.h> @@ -763,8 +764,6 @@ MIO_PARENT_DEV(mioa701_backlight, "pwm-backlight", &pxa27x_device_pwm0.dev, &mioa701_backlight_data); MIO_SIMPLE_DEV(mioa701_led, "leds-gpio", &gpio_led_info) MIO_SIMPLE_DEV(pxa2xx_pcm, "pxa2xx-pcm", NULL) -MIO_SIMPLE_DEV(pxa2xx_ac97, "pxa2xx-ac97", NULL) -MIO_PARENT_DEV(mio_wm9713_codec, "wm9713-codec", &pxa2xx_ac97.dev, NULL) MIO_SIMPLE_DEV(mioa701_sound, "mioa701-wm9713", NULL) MIO_SIMPLE_DEV(mioa701_board, "mioa701-board", NULL) MIO_SIMPLE_DEV(gpio_vbus, "gpio-vbus", &gpio_vbus_data); @@ -774,8 +773,6 @@ static struct platform_device *devices[] __initdata = { &mioa701_backlight, &mioa701_led, &pxa2xx_pcm, - &pxa2xx_ac97, - &mio_wm9713_codec, &mioa701_sound, &power_dev, &strataflash, @@ -818,6 +815,7 @@ static void __init mioa701_machine_init(void) pxa_set_keypad_info(&mioa701_keypad_info); wm97xx_bat_set_pdata(&mioa701_battery_data); pxa_set_udc_info(&mioa701_udc_info); + pxa_set_ac97_info(NULL); pm_power_off = mioa701_poweroff; arm_pm_restart = mioa701_restart; platform_add_devices(devices, ARRAY_SIZE(devices)); diff --git a/arch/arm/mach-pxa/palmld.c b/arch/arm/mach-pxa/palmld.c index 8587477a9bb..ecf5910e39d 100644 --- a/arch/arm/mach-pxa/palmld.c +++ b/arch/arm/mach-pxa/palmld.c @@ -24,6 +24,7 @@ #include <linux/gpio.h> #include <linux/wm97xx_batt.h> #include <linux/power_supply.h> +#include <linux/sysdev.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> @@ -68,10 +69,10 @@ static unsigned long palmld_pin_config[] __initdata = { GPIO47_FICP_TXD, /* MATRIX KEYPAD */ - GPIO100_KP_MKIN_0, - GPIO101_KP_MKIN_1, - GPIO102_KP_MKIN_2, - GPIO97_KP_MKIN_3, + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, GPIO103_KP_MKOUT_0, GPIO104_KP_MKOUT_1, GPIO105_KP_MKOUT_2, @@ -507,6 +508,33 @@ static struct pxafb_mach_info palmld_lcd_screen = { }; /****************************************************************************** + * Power management - standby + ******************************************************************************/ +#ifdef CONFIG_PM +static u32 *addr __initdata; +static u32 resume[3] __initdata = { + 0xe3a00101, /* mov r0, #0x40000000 */ + 0xe380060f, /* orr r0, r0, #0x00f00000 */ + 0xe590f008, /* ldr pc, [r0, #0x08] */ +}; + +static int __init palmld_pm_init(void) +{ + int i; + + /* this is where the bootloader jumps */ + addr = phys_to_virt(PALMLD_STR_BASE); + + for (i = 0; i < 3; i++) + addr[i] = resume[i]; + + return 0; +} + +device_initcall(palmld_pm_init); +#endif + +/****************************************************************************** * Machine init ******************************************************************************/ static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-pxa/palmt5.c b/arch/arm/mach-pxa/palmt5.c index 9521c7b3349..0680f1a575a 100644 --- a/arch/arm/mach-pxa/palmt5.c +++ b/arch/arm/mach-pxa/palmt5.c @@ -75,10 +75,10 @@ static unsigned long palmt5_pin_config[] __initdata = { GPIO95_GPIO, /* usb power */ /* MATRIX KEYPAD */ - GPIO100_KP_MKIN_0, - GPIO101_KP_MKIN_1, - GPIO102_KP_MKIN_2, - GPIO97_KP_MKIN_3, + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, GPIO103_KP_MKOUT_0, GPIO104_KP_MKOUT_1, GPIO105_KP_MKOUT_2, @@ -450,6 +450,33 @@ static struct pxafb_mach_info palmt5_lcd_screen = { }; /****************************************************************************** + * Power management - standby + ******************************************************************************/ +#ifdef CONFIG_PM +static u32 *addr __initdata; +static u32 resume[3] __initdata = { + 0xe3a00101, /* mov r0, #0x40000000 */ + 0xe380060f, /* orr r0, r0, #0x00f00000 */ + 0xe590f008, /* ldr pc, [r0, #0x08] */ +}; + +static int __init palmt5_pm_init(void) +{ + int i; + + /* this is where the bootloader jumps */ + addr = phys_to_virt(PALMT5_STR_BASE); + + for (i = 0; i < 3; i++) + addr[i] = resume[i]; + + return 0; +} + +device_initcall(palmt5_pm_init); +#endif + +/****************************************************************************** * Machine init ******************************************************************************/ static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-pxa/palmte2.c b/arch/arm/mach-pxa/palmte2.c new file mode 100644 index 00000000000..43fcf2e8688 --- /dev/null +++ b/arch/arm/mach-pxa/palmte2.c @@ -0,0 +1,466 @@ +/* + * Hardware definitions for Palm Tungsten|E2 + * + * Author: + * Carlos Eduardo Medaglia Dyonisio <cadu@nerdfeliz.com> + * + * Rewrite for mainline: + * Marek Vasut <marek.vasut@gmail.com> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License version 2 as + * published by the Free Software Foundation. + * + * (find more info at www.hackndev.com) + * + */ + +#include <linux/platform_device.h> +#include <linux/delay.h> +#include <linux/irq.h> +#include <linux/gpio_keys.h> +#include <linux/input.h> +#include <linux/pda_power.h> +#include <linux/pwm_backlight.h> +#include <linux/gpio.h> +#include <linux/wm97xx_batt.h> +#include <linux/power_supply.h> + +#include <asm/mach-types.h> +#include <asm/mach/arch.h> +#include <asm/mach/map.h> + +#include <mach/audio.h> +#include <mach/palmte2.h> +#include <mach/mmc.h> +#include <mach/pxafb.h> +#include <mach/mfp-pxa25x.h> +#include <mach/irda.h> +#include <mach/udc.h> + +#include "generic.h" +#include "devices.h" + +/****************************************************************************** + * Pin configuration + ******************************************************************************/ +static unsigned long palmte2_pin_config[] __initdata = { + /* MMC */ + GPIO6_MMC_CLK, + GPIO8_MMC_CS0, + GPIO10_GPIO, /* SD detect */ + GPIO55_GPIO, /* SD power */ + GPIO51_GPIO, /* SD r/o switch */ + + /* AC97 */ + GPIO28_AC97_BITCLK, + GPIO29_AC97_SDATA_IN_0, + GPIO30_AC97_SDATA_OUT, + GPIO31_AC97_SYNC, + + /* PWM */ + GPIO16_PWM0_OUT, + + /* USB */ + GPIO15_GPIO, /* usb detect */ + GPIO53_GPIO, /* usb power */ + + /* IrDA */ + GPIO48_GPIO, /* ir disable */ + GPIO46_FICP_RXD, + GPIO47_FICP_TXD, + + /* LCD */ + GPIO58_LCD_LDD_0, + GPIO59_LCD_LDD_1, + GPIO60_LCD_LDD_2, + GPIO61_LCD_LDD_3, + GPIO62_LCD_LDD_4, + GPIO63_LCD_LDD_5, + GPIO64_LCD_LDD_6, + GPIO65_LCD_LDD_7, + GPIO66_LCD_LDD_8, + GPIO67_LCD_LDD_9, + GPIO68_LCD_LDD_10, + GPIO69_LCD_LDD_11, + GPIO70_LCD_LDD_12, + GPIO71_LCD_LDD_13, + GPIO72_LCD_LDD_14, + GPIO73_LCD_LDD_15, + GPIO74_LCD_FCLK, + GPIO75_LCD_LCLK, + GPIO76_LCD_PCLK, + GPIO77_LCD_BIAS, + + /* GPIO KEYS */ + GPIO5_GPIO, /* notes */ + GPIO7_GPIO, /* tasks */ + GPIO11_GPIO, /* calendar */ + GPIO13_GPIO, /* contacts */ + GPIO14_GPIO, /* center */ + GPIO19_GPIO, /* left */ + GPIO20_GPIO, /* right */ + GPIO21_GPIO, /* down */ + GPIO22_GPIO, /* up */ + + /* MISC */ + GPIO1_RST, /* reset */ + GPIO4_GPIO, /* Hotsync button */ + GPIO9_GPIO, /* power detect */ + GPIO37_GPIO, /* LCD power */ + GPIO56_GPIO, /* Backlight power */ +}; + +/****************************************************************************** + * SD/MMC card controller + ******************************************************************************/ +static int palmte2_mci_init(struct device *dev, + irq_handler_t palmte2_detect_int, void *data) +{ + int err = 0; + + /* Setup an interrupt for detecting card insert/remove events */ + err = gpio_request(GPIO_NR_PALMTE2_SD_DETECT_N, "SD IRQ"); + if (err) + goto err; + err = gpio_direction_input(GPIO_NR_PALMTE2_SD_DETECT_N); + if (err) + goto err2; + err = request_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), + palmte2_detect_int, IRQF_DISABLED | IRQF_SAMPLE_RANDOM | + IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING, + "SD/MMC card detect", data); + if (err) { + printk(KERN_ERR "%s: cannot request SD/MMC card detect IRQ\n", + __func__); + goto err2; + } + + err = gpio_request(GPIO_NR_PALMTE2_SD_POWER, "SD_POWER"); + if (err) + goto err3; + err = gpio_direction_output(GPIO_NR_PALMTE2_SD_POWER, 0); + if (err) + goto err4; + + err = gpio_request(GPIO_NR_PALMTE2_SD_READONLY, "SD_READONLY"); + if (err) + goto err4; + err = gpio_direction_input(GPIO_NR_PALMTE2_SD_READONLY); + if (err) + goto err5; + + printk(KERN_DEBUG "%s: irq registered\n", __func__); + + return 0; + +err5: + gpio_free(GPIO_NR_PALMTE2_SD_READONLY); +err4: + gpio_free(GPIO_NR_PALMTE2_SD_POWER); +err3: + free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data); +err2: + gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N); +err: + return err; +} + +static void palmte2_mci_exit(struct device *dev, void *data) +{ + gpio_free(GPIO_NR_PALMTE2_SD_READONLY); + gpio_free(GPIO_NR_PALMTE2_SD_POWER); + free_irq(gpio_to_irq(GPIO_NR_PALMTE2_SD_DETECT_N), data); + gpio_free(GPIO_NR_PALMTE2_SD_DETECT_N); +} + +static void palmte2_mci_power(struct device *dev, unsigned int vdd) +{ + struct pxamci_platform_data *p_d = dev->platform_data; + gpio_set_value(GPIO_NR_PALMTE2_SD_POWER, p_d->ocr_mask & (1 << vdd)); +} + +static int palmte2_mci_get_ro(struct device *dev) +{ + return gpio_get_value(GPIO_NR_PALMTE2_SD_READONLY); +} + +static struct pxamci_platform_data palmte2_mci_platform_data = { + .ocr_mask = MMC_VDD_32_33 | MMC_VDD_33_34, + .setpower = palmte2_mci_power, + .get_ro = palmte2_mci_get_ro, + .init = palmte2_mci_init, + .exit = palmte2_mci_exit, +}; + +/****************************************************************************** + * GPIO keys + ******************************************************************************/ +static struct gpio_keys_button palmte2_pxa_buttons[] = { + {KEY_F1, GPIO_NR_PALMTE2_KEY_CONTACTS, 1, "Contacts" }, + {KEY_F2, GPIO_NR_PALMTE2_KEY_CALENDAR, 1, "Calendar" }, + {KEY_F3, GPIO_NR_PALMTE2_KEY_TASKS, 1, "Tasks" }, + {KEY_F4, GPIO_NR_PALMTE2_KEY_NOTES, 1, "Notes" }, + {KEY_ENTER, GPIO_NR_PALMTE2_KEY_CENTER, 1, "Center" }, + {KEY_LEFT, GPIO_NR_PALMTE2_KEY_LEFT, 1, "Left" }, + {KEY_RIGHT, GPIO_NR_PALMTE2_KEY_RIGHT, 1, "Right" }, + {KEY_DOWN, GPIO_NR_PALMTE2_KEY_DOWN, 1, "Down" }, + {KEY_UP, GPIO_NR_PALMTE2_KEY_UP, 1, "Up" }, +}; + +static struct gpio_keys_platform_data palmte2_pxa_keys_data = { + .buttons = palmte2_pxa_buttons, + .nbuttons = ARRAY_SIZE(palmte2_pxa_buttons), +}; + +static struct platform_device palmte2_pxa_keys = { + .name = "gpio-keys", + .id = -1, + .dev = { + .platform_data = &palmte2_pxa_keys_data, + }, +}; + +/****************************************************************************** + * Backlight + ******************************************************************************/ +static int palmte2_backlight_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMTE2_BL_POWER, "BL POWER"); + if (ret) + goto err; + ret = gpio_direction_output(GPIO_NR_PALMTE2_BL_POWER, 0); + if (ret) + goto err2; + ret = gpio_request(GPIO_NR_PALMTE2_LCD_POWER, "LCD POWER"); + if (ret) + goto err2; + ret = gpio_direction_output(GPIO_NR_PALMTE2_LCD_POWER, 0); + if (ret) + goto err3; + + return 0; +err3: + gpio_free(GPIO_NR_PALMTE2_LCD_POWER); +err2: + gpio_free(GPIO_NR_PALMTE2_BL_POWER); +err: + return ret; +} + +static int palmte2_backlight_notify(int brightness) +{ + gpio_set_value(GPIO_NR_PALMTE2_BL_POWER, brightness); + gpio_set_value(GPIO_NR_PALMTE2_LCD_POWER, brightness); + return brightness; +} + +static void palmte2_backlight_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMTE2_BL_POWER); + gpio_free(GPIO_NR_PALMTE2_LCD_POWER); +} + +static struct platform_pwm_backlight_data palmte2_backlight_data = { + .pwm_id = 0, + .max_brightness = PALMTE2_MAX_INTENSITY, + .dft_brightness = PALMTE2_MAX_INTENSITY, + .pwm_period_ns = PALMTE2_PERIOD_NS, + .init = palmte2_backlight_init, + .notify = palmte2_backlight_notify, + .exit = palmte2_backlight_exit, +}; + +static struct platform_device palmte2_backlight = { + .name = "pwm-backlight", + .dev = { + .parent = &pxa25x_device_pwm0.dev, + .platform_data = &palmte2_backlight_data, + }, +}; + +/****************************************************************************** + * IrDA + ******************************************************************************/ +static int palmte2_irda_startup(struct device *dev) +{ + int err; + err = gpio_request(GPIO_NR_PALMTE2_IR_DISABLE, "IR DISABLE"); + if (err) + goto err; + err = gpio_direction_output(GPIO_NR_PALMTE2_IR_DISABLE, 1); + if (err) + gpio_free(GPIO_NR_PALMTE2_IR_DISABLE); +err: + return err; +} + +static void palmte2_irda_shutdown(struct device *dev) +{ + gpio_free(GPIO_NR_PALMTE2_IR_DISABLE); +} + +static void palmte2_irda_transceiver_mode(struct device *dev, int mode) +{ + gpio_set_value(GPIO_NR_PALMTE2_IR_DISABLE, mode & IR_OFF); + pxa2xx_transceiver_mode(dev, mode); +} + +static struct pxaficp_platform_data palmte2_ficp_platform_data = { + .startup = palmte2_irda_startup, + .shutdown = palmte2_irda_shutdown, + .transceiver_cap = IR_SIRMODE | IR_FIRMODE | IR_OFF, + .transceiver_mode = palmte2_irda_transceiver_mode, +}; + +/****************************************************************************** + * UDC + ******************************************************************************/ +static struct pxa2xx_udc_mach_info palmte2_udc_info __initdata = { + .gpio_vbus = GPIO_NR_PALMTE2_USB_DETECT_N, + .gpio_vbus_inverted = 1, + .gpio_pullup = GPIO_NR_PALMTE2_USB_PULLUP, + .gpio_pullup_inverted = 0, +}; + +/****************************************************************************** + * Power supply + ******************************************************************************/ +static int power_supply_init(struct device *dev) +{ + int ret; + + ret = gpio_request(GPIO_NR_PALMTE2_POWER_DETECT, "CABLE_STATE_AC"); + if (ret) + goto err1; + ret = gpio_direction_input(GPIO_NR_PALMTE2_POWER_DETECT); + if (ret) + goto err2; + + return 0; + +err2: + gpio_free(GPIO_NR_PALMTE2_POWER_DETECT); +err1: + return ret; +} + +static int palmte2_is_ac_online(void) +{ + return gpio_get_value(GPIO_NR_PALMTE2_POWER_DETECT); +} + +static void power_supply_exit(struct device *dev) +{ + gpio_free(GPIO_NR_PALMTE2_POWER_DETECT); +} + +static char *palmte2_supplicants[] = { + "main-battery", +}; + +static struct pda_power_pdata power_supply_info = { + .init = power_supply_init, + .is_ac_online = palmte2_is_ac_online, + .exit = power_supply_exit, + .supplied_to = palmte2_supplicants, + .num_supplicants = ARRAY_SIZE(palmte2_supplicants), +}; + +static struct platform_device power_supply = { + .name = "pda-power", + .id = -1, + .dev = { + .platform_data = &power_supply_info, + }, +}; + +/****************************************************************************** + * WM97xx battery + ******************************************************************************/ +static struct wm97xx_batt_info wm97xx_batt_pdata = { + .batt_aux = WM97XX_AUX_ID3, + .temp_aux = WM97XX_AUX_ID2, + .charge_gpio = -1, + .max_voltage = PALMTE2_BAT_MAX_VOLTAGE, + .min_voltage = PALMTE2_BAT_MIN_VOLTAGE, + .batt_mult = 1000, + .batt_div = 414, + .temp_mult = 1, + .temp_div = 1, + .batt_tech = POWER_SUPPLY_TECHNOLOGY_LIPO, + .batt_name = "main-batt", +}; + +/****************************************************************************** + * Framebuffer + ******************************************************************************/ +static struct pxafb_mode_info palmte2_lcd_modes[] = { +{ + .pixclock = 77757, + .xres = 320, + .yres = 320, + .bpp = 16, + + .left_margin = 28, + .right_margin = 7, + .upper_margin = 7, + .lower_margin = 5, + + .hsync_len = 4, + .vsync_len = 1, +}, +}; + +static struct pxafb_mach_info palmte2_lcd_screen = { + .modes = palmte2_lcd_modes, + .num_modes = ARRAY_SIZE(palmte2_lcd_modes), + .lcd_conn = LCD_COLOR_TFT_16BPP | LCD_PCLK_EDGE_FALL, +}; + +/****************************************************************************** + * Machine init + ******************************************************************************/ +static struct platform_device *devices[] __initdata = { +#if defined(CONFIG_KEYBOARD_GPIO) || defined(CONFIG_KEYBOARD_GPIO_MODULE) + &palmte2_pxa_keys, +#endif + &palmte2_backlight, + &power_supply, +}; + +/* setup udc GPIOs initial state */ +static void __init palmte2_udc_init(void) +{ + if (!gpio_request(GPIO_NR_PALMTE2_USB_PULLUP, "UDC Vbus")) { + gpio_direction_output(GPIO_NR_PALMTE2_USB_PULLUP, 1); + gpio_free(GPIO_NR_PALMTE2_USB_PULLUP); + } +} + +static void __init palmte2_init(void) +{ + pxa2xx_mfp_config(ARRAY_AND_SIZE(palmte2_pin_config)); + + set_pxa_fb_info(&palmte2_lcd_screen); + pxa_set_mci_info(&palmte2_mci_platform_data); + palmte2_udc_init(); + pxa_set_udc_info(&palmte2_udc_info); + pxa_set_ac97_info(NULL); + pxa_set_ficp_info(&palmte2_ficp_platform_data); + wm97xx_bat_set_pdata(&wm97xx_batt_pdata); + + platform_add_devices(devices, ARRAY_SIZE(devices)); +} + +MACHINE_START(PALMTE2, "Palm Tungsten|E2") + .phys_io = 0x40000000, + .io_pg_offst = (io_p2v(0x40000000) >> 18) & 0xfffc, + .boot_params = 0xa0000100, + .map_io = pxa_map_io, + .init_irq = pxa25x_init_irq, + .timer = &pxa_timer, + .init_machine = palmte2_init +MACHINE_END diff --git a/arch/arm/mach-pxa/palmtx.c b/arch/arm/mach-pxa/palmtx.c index b490c092461..59d0c1cba55 100644 --- a/arch/arm/mach-pxa/palmtx.c +++ b/arch/arm/mach-pxa/palmtx.c @@ -93,10 +93,10 @@ static unsigned long palmtx_pin_config[] __initdata = { GPIO116_GPIO, /* wifi ready */ /* MATRIX KEYPAD */ - GPIO100_KP_MKIN_0, - GPIO101_KP_MKIN_1, - GPIO102_KP_MKIN_2, - GPIO97_KP_MKIN_3, + GPIO100_KP_MKIN_0 | WAKEUP_ON_LEVEL_HIGH, + GPIO101_KP_MKIN_1 | WAKEUP_ON_LEVEL_HIGH, + GPIO102_KP_MKIN_2 | WAKEUP_ON_LEVEL_HIGH, + GPIO97_KP_MKIN_3 | WAKEUP_ON_LEVEL_HIGH, GPIO103_KP_MKOUT_0, GPIO104_KP_MKOUT_1, GPIO105_KP_MKOUT_2, @@ -459,6 +459,33 @@ static struct pxafb_mach_info palmtx_lcd_screen = { }; /****************************************************************************** + * Power management - standby + ******************************************************************************/ +#ifdef CONFIG_PM +static u32 *addr __initdata; +static u32 resume[3] __initdata = { + 0xe3a00101, /* mov r0, #0x40000000 */ + 0xe380060f, /* orr r0, r0, #0x00f00000 */ + 0xe590f008, /* ldr pc, [r0, #0x08] */ +}; + +static int __init palmtx_pm_init(void) +{ + int i; + + /* this is where the bootloader jumps */ + addr = phys_to_virt(PALMTX_STR_BASE); + + for (i = 0; i < 3; i++) + addr[i] = resume[i]; + + return 0; +} + +device_initcall(palmtx_pm_init); +#endif + +/****************************************************************************** * Machine init ******************************************************************************/ static struct platform_device *devices[] __initdata = { diff --git a/arch/arm/mach-pxa/tosa.c b/arch/arm/mach-pxa/tosa.c index 6e8ade6ae33..afac5b6d3d7 100644 --- a/arch/arm/mach-pxa/tosa.c +++ b/arch/arm/mach-pxa/tosa.c @@ -45,6 +45,7 @@ #include <mach/udc.h> #include <mach/tosa_bt.h> #include <mach/pxa2xx_spi.h> +#include <mach/audio.h> #include <asm/mach/arch.h> #include <mach/tosa.h> @@ -914,6 +915,7 @@ static void __init tosa_init(void) pxa_set_udc_info(&udc_info); pxa_set_ficp_info(&tosa_ficp_platform_data); pxa_set_i2c_info(NULL); + pxa_set_ac97_info(NULL); platform_scoop_config = &tosa_pcmcia_config; pxa2xx_set_spi_info(2, &pxa_ssp_master_info); diff --git a/arch/arm/mm/mmu.c b/arch/arm/mm/mmu.c index b438fc4fb77..e6344ece00c 100644 --- a/arch/arm/mm/mmu.c +++ b/arch/arm/mm/mmu.c @@ -828,6 +828,17 @@ void __init reserve_node_zero(pg_data_t *pgdat) BOOTMEM_DEFAULT); } + if (machine_is_palmld() || machine_is_palmtx()) { + reserve_bootmem_node(pgdat, 0xa0000000, 0x1000, + BOOTMEM_EXCLUSIVE); + reserve_bootmem_node(pgdat, 0xa0200000, 0x1000, + BOOTMEM_EXCLUSIVE); + } + + if (machine_is_palmt5()) + reserve_bootmem_node(pgdat, 0xa0200000, 0x1000, + BOOTMEM_EXCLUSIVE); + #ifdef CONFIG_SA1111 /* * Because of the SA1111 DMA bug, we want to preserve our diff --git a/arch/ia64/include/asm/unistd.h b/arch/ia64/include/asm/unistd.h index 9015979ebe0..10a9eb05f74 100644 --- a/arch/ia64/include/asm/unistd.h +++ b/arch/ia64/include/asm/unistd.h @@ -308,11 +308,13 @@ #define __NR_dup3 1316 #define __NR_pipe2 1317 #define __NR_inotify_init1 1318 +#define __NR_preadv 1319 +#define __NR_pwritev 1320 #ifdef __KERNEL__ -#define NR_syscalls 295 /* length of syscall table */ +#define NR_syscalls 297 /* length of syscall table */ /* * The following defines stop scripts/checksyscalls.sh from complaining about diff --git a/arch/ia64/kernel/entry.S b/arch/ia64/kernel/entry.S index 8dc69669586..7bebac0e1d4 100644 --- a/arch/ia64/kernel/entry.S +++ b/arch/ia64/kernel/entry.S @@ -1803,6 +1803,8 @@ sys_call_table: data8 sys_dup3 data8 sys_pipe2 data8 sys_inotify_init1 + data8 sys_preadv + data8 sys_pwritev // 1320 .org sys_call_table + 8*NR_syscalls // guard against failures to increase NR_syscalls #endif /* __IA64_ASM_PARAVIRTUALIZED_NATIVE */ diff --git a/arch/sparc/include/asm/unistd.h b/arch/sparc/include/asm/unistd.h index 031f038b19f..b8eb71ef316 100644 --- a/arch/sparc/include/asm/unistd.h +++ b/arch/sparc/include/asm/unistd.h @@ -392,8 +392,10 @@ #define __NR_pipe2 321 #define __NR_inotify_init1 322 #define __NR_accept4 323 +#define __NR_preadv 324 +#define __NR_pwritev 325 -#define NR_SYSCALLS 324 +#define NR_SYSCALLS 326 #ifdef __32bit_syscall_numbers__ /* Sparc 32-bit only has the "setresuid32", "getresuid32" variants, diff --git a/arch/sparc/kernel/of_device_64.c b/arch/sparc/kernel/of_device_64.c index b4a12c9aa5f..27381f1baff 100644 --- a/arch/sparc/kernel/of_device_64.c +++ b/arch/sparc/kernel/of_device_64.c @@ -99,8 +99,7 @@ static inline u64 of_read_addr(const u32 *cell, int size) return r; } -static void __init get_cells(struct device_node *dp, - int *addrc, int *sizec) +static void get_cells(struct device_node *dp, int *addrc, int *sizec) { if (addrc) *addrc = of_n_addr_cells(dp); diff --git a/arch/sparc/kernel/pci_fire.c b/arch/sparc/kernel/pci_fire.c index 9462b68f489..d53f45bc7dd 100644 --- a/arch/sparc/kernel/pci_fire.c +++ b/arch/sparc/kernel/pci_fire.c @@ -409,8 +409,8 @@ static void pci_fire_hw_init(struct pci_pbm_info *pbm) upa_writeq(~(u64)0, pbm->pbm_regs + FIRE_PEC_IENAB); } -static int __init pci_fire_pbm_init(struct pci_pbm_info *pbm, - struct of_device *op, u32 portid) +static int __devinit pci_fire_pbm_init(struct pci_pbm_info *pbm, + struct of_device *op, u32 portid) { const struct linux_prom64_registers *regs; struct device_node *dp = op->node; diff --git a/arch/sparc/kernel/pci_psycho.c b/arch/sparc/kernel/pci_psycho.c index 3b34344082e..142b9d6984a 100644 --- a/arch/sparc/kernel/pci_psycho.c +++ b/arch/sparc/kernel/pci_psycho.c @@ -365,8 +365,8 @@ static void pbm_config_busmastering(struct pci_pbm_info *pbm) pci_config_write8(addr, 64); } -static void __init psycho_scan_bus(struct pci_pbm_info *pbm, - struct device *parent) +static void __devinit psycho_scan_bus(struct pci_pbm_info *pbm, + struct device *parent) { pbm_config_busmastering(pbm); pbm->is_66mhz_capable = 0; @@ -482,8 +482,8 @@ static void psycho_pbm_strbuf_init(struct pci_pbm_info *pbm, #define PSYCHO_MEMSPACE_B 0x180000000UL #define PSYCHO_MEMSPACE_SIZE 0x07fffffffUL -static void __init psycho_pbm_init(struct pci_pbm_info *pbm, - struct of_device *op, int is_pbm_a) +static void __devinit psycho_pbm_init(struct pci_pbm_info *pbm, + struct of_device *op, int is_pbm_a) { psycho_pbm_init_common(pbm, op, "PSYCHO", PBM_CHIP_TYPE_PSYCHO); psycho_pbm_strbuf_init(pbm, is_pbm_a); diff --git a/arch/sparc/kernel/pci_sabre.c b/arch/sparc/kernel/pci_sabre.c index 713257b6963..ba6fbeba3e2 100644 --- a/arch/sparc/kernel/pci_sabre.c +++ b/arch/sparc/kernel/pci_sabre.c @@ -402,8 +402,8 @@ static void apb_init(struct pci_bus *sabre_bus) } } -static void __init sabre_scan_bus(struct pci_pbm_info *pbm, - struct device *parent) +static void __devinit sabre_scan_bus(struct pci_pbm_info *pbm, + struct device *parent) { static int once; @@ -442,8 +442,8 @@ static void __init sabre_scan_bus(struct pci_pbm_info *pbm, sabre_register_error_handlers(pbm); } -static void __init sabre_pbm_init(struct pci_pbm_info *pbm, - struct of_device *op) +static void __devinit sabre_pbm_init(struct pci_pbm_info *pbm, + struct of_device *op) { psycho_pbm_init_common(pbm, op, "SABRE", PBM_CHIP_TYPE_SABRE); pbm->pci_afsr = pbm->controller_regs + SABRE_PIOAFSR; diff --git a/arch/sparc/kernel/pci_sun4v.c b/arch/sparc/kernel/pci_sun4v.c index 0ef0ab3d476..5db5ebed35d 100644 --- a/arch/sparc/kernel/pci_sun4v.c +++ b/arch/sparc/kernel/pci_sun4v.c @@ -545,8 +545,8 @@ static const struct dma_ops sun4v_dma_ops = { .sync_sg_for_cpu = dma_4v_sync_sg_for_cpu, }; -static void __init pci_sun4v_scan_bus(struct pci_pbm_info *pbm, - struct device *parent) +static void __devinit pci_sun4v_scan_bus(struct pci_pbm_info *pbm, + struct device *parent) { struct property *prop; struct device_node *dp; @@ -559,8 +559,8 @@ static void __init pci_sun4v_scan_bus(struct pci_pbm_info *pbm, /* XXX register error interrupt handlers XXX */ } -static unsigned long __init probe_existing_entries(struct pci_pbm_info *pbm, - struct iommu *iommu) +static unsigned long __devinit probe_existing_entries(struct pci_pbm_info *pbm, + struct iommu *iommu) { struct iommu_arena *arena = &iommu->arena; unsigned long i, cnt = 0; @@ -587,7 +587,7 @@ static unsigned long __init probe_existing_entries(struct pci_pbm_info *pbm, return cnt; } -static int __init pci_sun4v_iommu_init(struct pci_pbm_info *pbm) +static int __devinit pci_sun4v_iommu_init(struct pci_pbm_info *pbm) { static const u32 vdma_default[] = { 0x80000000, 0x80000000 }; struct iommu *iommu = pbm->iommu; @@ -889,8 +889,8 @@ static void pci_sun4v_msi_init(struct pci_pbm_info *pbm) } #endif /* !(CONFIG_PCI_MSI) */ -static int __init pci_sun4v_pbm_init(struct pci_pbm_info *pbm, - struct of_device *op, u32 devhandle) +static int __devinit pci_sun4v_pbm_init(struct pci_pbm_info *pbm, + struct of_device *op, u32 devhandle) { struct device_node *dp = op->node; int err; diff --git a/arch/sparc/kernel/power.c b/arch/sparc/kernel/power.c index ae88f06a7ec..e2a045c235a 100644 --- a/arch/sparc/kernel/power.c +++ b/arch/sparc/kernel/power.c @@ -23,7 +23,7 @@ static irqreturn_t power_handler(int irq, void *dev_id) return IRQ_HANDLED; } -static int __init has_button_interrupt(unsigned int irq, struct device_node *dp) +static int __devinit has_button_interrupt(unsigned int irq, struct device_node *dp) { if (irq == 0xffffffff) return 0; diff --git a/arch/sparc/kernel/systbls_32.S b/arch/sparc/kernel/systbls_32.S index dccc95df0c7..00ec3b15f38 100644 --- a/arch/sparc/kernel/systbls_32.S +++ b/arch/sparc/kernel/systbls_32.S @@ -81,4 +81,4 @@ sys_call_table: /*305*/ .long sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait /*310*/ .long sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate /*315*/ .long sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1 -/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4 +/*320*/ .long sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv, sys_pwritev diff --git a/arch/sparc/kernel/systbls_64.S b/arch/sparc/kernel/systbls_64.S index a8000b1cda7..82b5bf85b9d 100644 --- a/arch/sparc/kernel/systbls_64.S +++ b/arch/sparc/kernel/systbls_64.S @@ -82,7 +82,7 @@ sys_call_table32: .word compat_sys_set_mempolicy, compat_sys_kexec_load, compat_sys_move_pages, sys_getcpu, compat_sys_epoll_pwait /*310*/ .word compat_sys_utimensat, compat_sys_signalfd, sys_timerfd_create, sys_eventfd, compat_sys_fallocate .word compat_sys_timerfd_settime, compat_sys_timerfd_gettime, compat_sys_signalfd4, sys_eventfd2, sys_epoll_create1 -/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4 +/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, compat_sys_preadv, compat_sys_pwritev #endif /* CONFIG_COMPAT */ @@ -156,4 +156,4 @@ sys_call_table: .word sys_set_mempolicy, sys_kexec_load, sys_move_pages, sys_getcpu, sys_epoll_pwait /*310*/ .word sys_utimensat, sys_signalfd, sys_timerfd_create, sys_eventfd, sys_fallocate .word sys_timerfd_settime, sys_timerfd_gettime, sys_signalfd4, sys_eventfd2, sys_epoll_create1 -/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4 +/*320*/ .word sys_dup3, sys_pipe2, sys_inotify_init1, sys_accept4, sys_preadv, sys_pwritev diff --git a/arch/sparc/mm/init_64.c b/arch/sparc/mm/init_64.c index 2c8dfeb7ab0..f26a352c08a 100644 --- a/arch/sparc/mm/init_64.c +++ b/arch/sparc/mm/init_64.c @@ -70,8 +70,8 @@ extern struct tsb swapper_4m_tsb[KERNEL_TSB4M_NENTRIES]; #define MAX_BANKS 32 -static struct linux_prom64_registers pavail[MAX_BANKS] __initdata; -static int pavail_ents __initdata; +static struct linux_prom64_registers pavail[MAX_BANKS] __devinitdata; +static int pavail_ents __devinitdata; static int cmp_p64(const void *a, const void *b) { @@ -968,7 +968,7 @@ int of_node_to_nid(struct device_node *dp) return nid; } -static void add_node_ranges(void) +static void __init add_node_ranges(void) { int i; @@ -1841,7 +1841,7 @@ void __init paging_init(void) printk("Booting Linux...\n"); } -int __init page_in_phys_avail(unsigned long paddr) +int __devinit page_in_phys_avail(unsigned long paddr) { int i; diff --git a/arch/x86/include/asm/cpufeature.h b/arch/x86/include/asm/cpufeature.h index 0beba0d1468..bb83b1c397a 100644 --- a/arch/x86/include/asm/cpufeature.h +++ b/arch/x86/include/asm/cpufeature.h @@ -154,6 +154,7 @@ * CPUID levels like 0x6, 0xA etc */ #define X86_FEATURE_IDA (7*32+ 0) /* Intel Dynamic Acceleration */ +#define X86_FEATURE_ARAT (7*32+ 1) /* Always Running APIC Timer */ /* Virtualization flags: Linux defined */ #define X86_FEATURE_TPR_SHADOW (8*32+ 0) /* Intel TPR Shadow */ diff --git a/arch/x86/kernel/apic/apic.c b/arch/x86/kernel/apic/apic.c index 098ec84b8c0..f2870920f24 100644 --- a/arch/x86/kernel/apic/apic.c +++ b/arch/x86/kernel/apic/apic.c @@ -431,6 +431,12 @@ static void __cpuinit setup_APIC_timer(void) { struct clock_event_device *levt = &__get_cpu_var(lapic_events); + if (cpu_has(¤t_cpu_data, X86_FEATURE_ARAT)) { + lapic_clockevent.features &= ~CLOCK_EVT_FEAT_C3STOP; + /* Make LAPIC timer preferrable over percpu HPET */ + lapic_clockevent.rating = 150; + } + memcpy(levt, &lapic_clockevent, sizeof(*levt)); levt->cpumask = cpumask_of(smp_processor_id()); diff --git a/arch/x86/kernel/cpu/addon_cpuid_features.c b/arch/x86/kernel/cpu/addon_cpuid_features.c index 8220ae69849..c965e521271 100644 --- a/arch/x86/kernel/cpu/addon_cpuid_features.c +++ b/arch/x86/kernel/cpu/addon_cpuid_features.c @@ -31,6 +31,7 @@ void __cpuinit init_scattered_cpuid_features(struct cpuinfo_x86 *c) static const struct cpuid_bit __cpuinitconst cpuid_bits[] = { { X86_FEATURE_IDA, CR_EAX, 1, 0x00000006 }, + { X86_FEATURE_ARAT, CR_EAX, 2, 0x00000006 }, { 0, 0, 0, 0 } }; diff --git a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c index 19f6b9d27e8..9d3af380c6b 100644 --- a/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c +++ b/arch/x86/kernel/cpu/cpufreq/acpi-cpufreq.c @@ -68,6 +68,7 @@ struct acpi_cpufreq_data { unsigned int max_freq; unsigned int resume; unsigned int cpu_feature; + u64 saved_aperf, saved_mperf; }; static DEFINE_PER_CPU(struct acpi_cpufreq_data *, drv_data); @@ -241,26 +242,23 @@ static u32 get_cur_val(const struct cpumask *mask) return cmd.val; } -struct perf_cur { +struct perf_pair { union { struct { u32 lo; u32 hi; } split; u64 whole; - } aperf_cur, mperf_cur; + } aperf, mperf; }; static long read_measured_perf_ctrs(void *_cur) { - struct perf_cur *cur = _cur; + struct perf_pair *cur = _cur; - rdmsr(MSR_IA32_APERF, cur->aperf_cur.split.lo, cur->aperf_cur.split.hi); - rdmsr(MSR_IA32_MPERF, cur->mperf_cur.split.lo, cur->mperf_cur.split.hi); - - wrmsr(MSR_IA32_APERF, 0, 0); - wrmsr(MSR_IA32_MPERF, 0, 0); + rdmsr(MSR_IA32_APERF, cur->aperf.split.lo, cur->aperf.split.hi); + rdmsr(MSR_IA32_MPERF, cur->mperf.split.lo, cur->mperf.split.hi); return 0; } @@ -281,52 +279,57 @@ static long read_measured_perf_ctrs(void *_cur) static unsigned int get_measured_perf(struct cpufreq_policy *policy, unsigned int cpu) { - struct perf_cur cur; + struct perf_pair readin, cur; unsigned int perf_percent; unsigned int retval; - if (!work_on_cpu(cpu, read_measured_perf_ctrs, &cur)) + if (!work_on_cpu(cpu, read_measured_perf_ctrs, &readin)) return 0; + cur.aperf.whole = readin.aperf.whole - + per_cpu(drv_data, cpu)->saved_aperf; + cur.mperf.whole = readin.mperf.whole - + per_cpu(drv_data, cpu)->saved_mperf; + per_cpu(drv_data, cpu)->saved_aperf = readin.aperf.whole; + per_cpu(drv_data, cpu)->saved_mperf = readin.mperf.whole; + #ifdef __i386__ /* * We dont want to do 64 bit divide with 32 bit kernel * Get an approximate value. Return failure in case we cannot get * an approximate value. */ - if (unlikely(cur.aperf_cur.split.hi || cur.mperf_cur.split.hi)) { + if (unlikely(cur.aperf.split.hi || cur.mperf.split.hi)) { int shift_count; u32 h; - h = max_t(u32, cur.aperf_cur.split.hi, cur.mperf_cur.split.hi); + h = max_t(u32, cur.aperf.split.hi, cur.mperf.split.hi); shift_count = fls(h); - cur.aperf_cur.whole >>= shift_count; - cur.mperf_cur.whole >>= shift_count; + cur.aperf.whole >>= shift_count; + cur.mperf.whole >>= shift_count; } - if (((unsigned long)(-1) / 100) < cur.aperf_cur.split.lo) { + if (((unsigned long)(-1) / 100) < cur.aperf.split.lo) { int shift_count = 7; - cur.aperf_cur.split.lo >>= shift_count; - cur.mperf_cur.split.lo >>= shift_count; + cur.aperf.split.lo >>= shift_count; + cur.mperf.split.lo >>= shift_count; } - if (cur.aperf_cur.split.lo && cur.mperf_cur.split.lo) - perf_percent = (cur.aperf_cur.split.lo * 100) / - cur.mperf_cur.split.lo; + if (cur.aperf.split.lo && cur.mperf.split.lo) + perf_percent = (cur.aperf.split.lo * 100) / cur.mperf.split.lo; else perf_percent = 0; #else - if (unlikely(((unsigned long)(-1) / 100) < cur.aperf_cur.whole)) { + if (unlikely(((unsigned long)(-1) / 100) < cur.aperf.whole)) { int shift_count = 7; - cur.aperf_cur.whole >>= shift_count; - cur.mperf_cur.whole >>= shift_count; + cur.aperf.whole >>= shift_count; + cur.mperf.whole >>= shift_count; } - if (cur.aperf_cur.whole && cur.mperf_cur.whole) - perf_percent = (cur.aperf_cur.whole * 100) / - cur.mperf_cur.whole; + if (cur.aperf.whole && cur.mperf.whole) + perf_percent = (cur.aperf.whole * 100) / cur.mperf.whole; else perf_percent = 0; diff --git a/arch/x86/kernel/cpu/cpufreq/longhaul.c b/arch/x86/kernel/cpu/cpufreq/longhaul.c index 0bd48e65a0c..ce2ed3e4aad 100644 --- a/arch/x86/kernel/cpu/cpufreq/longhaul.c +++ b/arch/x86/kernel/cpu/cpufreq/longhaul.c @@ -33,7 +33,6 @@ #include <linux/timex.h> #include <linux/io.h> #include <linux/acpi.h> -#include <linux/kernel.h> #include <asm/msr.h> #include <acpi/processor.h> diff --git a/drivers/acpi/acpica/hwvalid.c b/drivers/acpi/acpica/hwvalid.c index bd3c937b0ac..7737afb157c 100644 --- a/drivers/acpi/acpica/hwvalid.c +++ b/drivers/acpi/acpica/hwvalid.c @@ -90,7 +90,6 @@ static const struct acpi_port_info acpi_protected_ports[] = { {"PIT2", 0x0048, 0x004B, ACPI_OSI_WIN_XP}, {"RTC", 0x0070, 0x0071, ACPI_OSI_WIN_XP}, {"CMOS", 0x0074, 0x0076, ACPI_OSI_WIN_XP}, - {"DMA1", 0x0081, 0x0083, ACPI_OSI_WIN_XP}, {"DMA1L", 0x0087, 0x0087, ACPI_OSI_WIN_XP}, {"DMA2", 0x0089, 0x008B, ACPI_OSI_WIN_XP}, {"DMA2L", 0x008F, 0x008F, ACPI_OSI_WIN_XP}, diff --git a/drivers/acpi/battery.c b/drivers/acpi/battery.c index b0de6312919..3c7d8942f23 100644 --- a/drivers/acpi/battery.c +++ b/drivers/acpi/battery.c @@ -903,7 +903,7 @@ static struct acpi_driver acpi_battery_driver = { }, }; -static void __init acpi_battery_init_async(void *unused, async_cookie_t cookie) +static void acpi_battery_init_async(void *unused, async_cookie_t cookie) { if (acpi_disabled) return; diff --git a/drivers/acpi/proc.c b/drivers/acpi/proc.c index 05dfdc96802..d0d550d22a6 100644 --- a/drivers/acpi/proc.c +++ b/drivers/acpi/proc.c @@ -343,9 +343,6 @@ acpi_system_write_alarm(struct file *file, } #endif /* HAVE_ACPI_LEGACY_ALARM */ -extern struct list_head acpi_wakeup_device_list; -extern spinlock_t acpi_device_lock; - static int acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) { @@ -353,7 +350,7 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) seq_printf(seq, "Device\tS-state\t Status Sysfs node\n"); - spin_lock(&acpi_device_lock); + mutex_lock(&acpi_device_lock); list_for_each_safe(node, next, &acpi_wakeup_device_list) { struct acpi_device *dev = container_of(node, struct acpi_device, wakeup_list); @@ -361,7 +358,6 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) if (!dev->wakeup.flags.valid) continue; - spin_unlock(&acpi_device_lock); ldev = acpi_get_physical_device(dev->handle); seq_printf(seq, "%s\t S%d\t%c%-8s ", @@ -376,9 +372,8 @@ acpi_system_wakeup_device_seq_show(struct seq_file *seq, void *offset) seq_printf(seq, "\n"); put_device(ldev); - spin_lock(&acpi_device_lock); } - spin_unlock(&acpi_device_lock); + mutex_unlock(&acpi_device_lock); return 0; } @@ -409,7 +404,7 @@ acpi_system_write_wakeup_device(struct file *file, strbuf[len] = '\0'; sscanf(strbuf, "%s", str); - spin_lock(&acpi_device_lock); + mutex_lock(&acpi_device_lock); list_for_each_safe(node, next, &acpi_wakeup_device_list) { struct acpi_device *dev = container_of(node, struct acpi_device, wakeup_list); @@ -446,7 +441,7 @@ acpi_system_write_wakeup_device(struct file *file, } } } - spin_unlock(&acpi_device_lock); + mutex_unlock(&acpi_device_lock); return count; } diff --git a/drivers/acpi/processor_idle.c b/drivers/acpi/processor_idle.c index 4e6e758bd39..6fe121434ff 100644 --- a/drivers/acpi/processor_idle.c +++ b/drivers/acpi/processor_idle.c @@ -145,6 +145,9 @@ static void acpi_timer_check_state(int state, struct acpi_processor *pr, struct acpi_processor_power *pwr = &pr->power; u8 type = local_apic_timer_c2_ok ? ACPI_STATE_C3 : ACPI_STATE_C2; + if (cpu_has(&cpu_data(pr->id), X86_FEATURE_ARAT)) + return; + /* * Check, if one of the previous states already marked the lapic * unstable diff --git a/drivers/acpi/scan.c b/drivers/acpi/scan.c index 20c23c04920..8ff510b91d8 100644 --- a/drivers/acpi/scan.c +++ b/drivers/acpi/scan.c @@ -24,7 +24,7 @@ extern struct acpi_device *acpi_root; static LIST_HEAD(acpi_device_list); static LIST_HEAD(acpi_bus_id_list); -DEFINE_SPINLOCK(acpi_device_lock); +DEFINE_MUTEX(acpi_device_lock); LIST_HEAD(acpi_wakeup_device_list); struct acpi_device_bus_id{ @@ -491,7 +491,6 @@ static int acpi_device_register(struct acpi_device *device, */ INIT_LIST_HEAD(&device->children); INIT_LIST_HEAD(&device->node); - INIT_LIST_HEAD(&device->g_list); INIT_LIST_HEAD(&device->wakeup_list); new_bus_id = kzalloc(sizeof(struct acpi_device_bus_id), GFP_KERNEL); @@ -500,7 +499,7 @@ static int acpi_device_register(struct acpi_device *device, return -ENOMEM; } - spin_lock(&acpi_device_lock); + mutex_lock(&acpi_device_lock); /* * Find suitable bus_id and instance number in acpi_bus_id_list * If failed, create one and link it into acpi_bus_id_list @@ -521,14 +520,12 @@ static int acpi_device_register(struct acpi_device *device, } dev_set_name(&device->dev, "%s:%02x", acpi_device_bus_id->bus_id, acpi_device_bus_id->instance_no); - if (device->parent) { + if (device->parent) list_add_tail(&device->node, &device->parent->children); - list_add_tail(&device->g_list, &device->parent->g_list); - } else - list_add_tail(&device->g_list, &acpi_device_list); + if (device->wakeup.flags.valid) list_add_tail(&device->wakeup_list, &acpi_wakeup_device_list); - spin_unlock(&acpi_device_lock); + mutex_unlock(&acpi_device_lock); if (device->parent) device->dev.parent = &parent->dev; @@ -549,28 +546,22 @@ static int acpi_device_register(struct acpi_device *device, device->removal_type = ACPI_BUS_REMOVAL_NORMAL; return 0; end: - spin_lock(&acpi_device_lock); - if (device->parent) { + mutex_lock(&acpi_device_lock); + if (device->parent) list_del(&device->node); - list_del(&device->g_list); - } else - list_del(&device->g_list); list_del(&device->wakeup_list); - spin_unlock(&acpi_device_lock); + mutex_unlock(&acpi_device_lock); return result; } static void acpi_device_unregister(struct acpi_device *device, int type) { - spin_lock(&acpi_device_lock); - if (device->parent) { + mutex_lock(&acpi_device_lock); + if (device->parent) list_del(&device->node); - list_del(&device->g_list); - } else - list_del(&device->g_list); list_del(&device->wakeup_list); - spin_unlock(&acpi_device_lock); + mutex_unlock(&acpi_device_lock); acpi_detach_data(device->handle, acpi_bus_data_handler); diff --git a/drivers/acpi/sleep.h b/drivers/acpi/sleep.h index cfaf8f5b0a1..8a8f3b3382a 100644 --- a/drivers/acpi/sleep.h +++ b/drivers/acpi/sleep.h @@ -5,3 +5,6 @@ extern int acpi_suspend (u32 state); extern void acpi_enable_wakeup_device_prep(u8 sleep_state); extern void acpi_enable_wakeup_device(u8 sleep_state); extern void acpi_disable_wakeup_device(u8 sleep_state); + +extern struct list_head acpi_wakeup_device_list; +extern struct mutex acpi_device_lock; diff --git a/drivers/acpi/thermal.c b/drivers/acpi/thermal.c index e8c143caf0f..9cd15e8c893 100644 --- a/drivers/acpi/thermal.c +++ b/drivers/acpi/thermal.c @@ -98,6 +98,7 @@ MODULE_PARM_DESC(psv, "Disable or override all passive trip points."); static int acpi_thermal_add(struct acpi_device *device); static int acpi_thermal_remove(struct acpi_device *device, int type); static int acpi_thermal_resume(struct acpi_device *device); +static void acpi_thermal_notify(struct acpi_device *device, u32 event); static int acpi_thermal_state_open_fs(struct inode *inode, struct file *file); static int acpi_thermal_temp_open_fs(struct inode *inode, struct file *file); static int acpi_thermal_trip_open_fs(struct inode *inode, struct file *file); @@ -123,6 +124,7 @@ static struct acpi_driver acpi_thermal_driver = { .add = acpi_thermal_add, .remove = acpi_thermal_remove, .resume = acpi_thermal_resume, + .notify = acpi_thermal_notify, }, }; @@ -192,6 +194,7 @@ struct acpi_thermal { struct acpi_handle_list devices; struct thermal_zone_device *thermal_zone; int tz_enabled; + int kelvin_offset; struct mutex lock; }; @@ -581,7 +584,7 @@ static void acpi_thermal_check(void *data) } /* sys I/F for generic thermal sysfs support */ -#define KELVIN_TO_MILLICELSIUS(t) (t * 100 - 273200) +#define KELVIN_TO_MILLICELSIUS(t, off) (((t) - (off)) * 100) static int thermal_get_temp(struct thermal_zone_device *thermal, unsigned long *temp) @@ -596,7 +599,7 @@ static int thermal_get_temp(struct thermal_zone_device *thermal, if (result) return result; - *temp = KELVIN_TO_MILLICELSIUS(tz->temperature); + *temp = KELVIN_TO_MILLICELSIUS(tz->temperature, tz->kelvin_offset); return 0; } @@ -702,7 +705,8 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal, if (tz->trips.critical.flags.valid) { if (!trip) { *temp = KELVIN_TO_MILLICELSIUS( - tz->trips.critical.temperature); + tz->trips.critical.temperature, + tz->kelvin_offset); return 0; } trip--; @@ -711,7 +715,8 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal, if (tz->trips.hot.flags.valid) { if (!trip) { *temp = KELVIN_TO_MILLICELSIUS( - tz->trips.hot.temperature); + tz->trips.hot.temperature, + tz->kelvin_offset); return 0; } trip--; @@ -720,7 +725,8 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal, if (tz->trips.passive.flags.valid) { if (!trip) { *temp = KELVIN_TO_MILLICELSIUS( - tz->trips.passive.temperature); + tz->trips.passive.temperature, + tz->kelvin_offset); return 0; } trip--; @@ -730,7 +736,8 @@ static int thermal_get_trip_temp(struct thermal_zone_device *thermal, tz->trips.active[i].flags.valid; i++) { if (!trip) { *temp = KELVIN_TO_MILLICELSIUS( - tz->trips.active[i].temperature); + tz->trips.active[i].temperature, + tz->kelvin_offset); return 0; } trip--; @@ -745,7 +752,8 @@ static int thermal_get_crit_temp(struct thermal_zone_device *thermal, if (tz->trips.critical.flags.valid) { *temperature = KELVIN_TO_MILLICELSIUS( - tz->trips.critical.temperature); + tz->trips.critical.temperature, + tz->kelvin_offset); return 0; } else return -EINVAL; @@ -1264,17 +1272,14 @@ static int acpi_thermal_remove_fs(struct acpi_device *device) Driver Interface -------------------------------------------------------------------------- */ -static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data) +static void acpi_thermal_notify(struct acpi_device *device, u32 event) { - struct acpi_thermal *tz = data; - struct acpi_device *device = NULL; + struct acpi_thermal *tz = acpi_driver_data(device); if (!tz) return; - device = tz->device; - switch (event) { case ACPI_THERMAL_NOTIFY_TEMPERATURE: acpi_thermal_check(tz); @@ -1298,8 +1303,6 @@ static void acpi_thermal_notify(acpi_handle handle, u32 event, void *data) "Unsupported event [0x%x]\n", event)); break; } - - return; } static int acpi_thermal_get_info(struct acpi_thermal *tz) @@ -1334,10 +1337,28 @@ static int acpi_thermal_get_info(struct acpi_thermal *tz) return 0; } +/* + * The exact offset between Kelvin and degree Celsius is 273.15. However ACPI + * handles temperature values with a single decimal place. As a consequence, + * some implementations use an offset of 273.1 and others use an offset of + * 273.2. Try to find out which one is being used, to present the most + * accurate and visually appealing number. + * + * The heuristic below should work for all ACPI thermal zones which have a + * critical trip point with a value being a multiple of 0.5 degree Celsius. + */ +static void acpi_thermal_guess_offset(struct acpi_thermal *tz) +{ + if (tz->trips.critical.flags.valid && + (tz->trips.critical.temperature % 5) == 1) + tz->kelvin_offset = 2731; + else + tz->kelvin_offset = 2732; +} + static int acpi_thermal_add(struct acpi_device *device) { int result = 0; - acpi_status status = AE_OK; struct acpi_thermal *tz = NULL; @@ -1360,6 +1381,8 @@ static int acpi_thermal_add(struct acpi_device *device) if (result) goto free_memory; + acpi_thermal_guess_offset(tz); + result = acpi_thermal_register_thermal_zone(tz); if (result) goto free_memory; @@ -1368,21 +1391,11 @@ static int acpi_thermal_add(struct acpi_device *device) if (result) goto unregister_thermal_zone; - status = acpi_install_notify_handler(device->handle, - ACPI_DEVICE_NOTIFY, - acpi_thermal_notify, tz); - if (ACPI_FAILURE(status)) { - result = -ENODEV; - goto remove_fs; - } - printk(KERN_INFO PREFIX "%s [%s] (%ld C)\n", acpi_device_name(device), acpi_device_bid(device), KELVIN_TO_CELSIUS(tz->temperature)); goto end; -remove_fs: - acpi_thermal_remove_fs(device); unregister_thermal_zone: thermal_zone_device_unregister(tz->thermal_zone); free_memory: @@ -1393,7 +1406,6 @@ end: static int acpi_thermal_remove(struct acpi_device *device, int type) { - acpi_status status = AE_OK; struct acpi_thermal *tz = NULL; if (!device || !acpi_driver_data(device)) @@ -1401,10 +1413,6 @@ static int acpi_thermal_remove(struct acpi_device *device, int type) tz = acpi_driver_data(device); - status = acpi_remove_notify_handler(device->handle, - ACPI_DEVICE_NOTIFY, - acpi_thermal_notify); - acpi_thermal_remove_fs(device); acpi_thermal_unregister_thermal_zone(tz); mutex_destroy(&tz->lock); diff --git a/drivers/acpi/video.c b/drivers/acpi/video.c index ab06143672b..cd4fb7543a9 100644 --- a/drivers/acpi/video.c +++ b/drivers/acpi/video.c @@ -79,6 +79,7 @@ module_param(brightness_switch_enabled, bool, 0644); static int acpi_video_bus_add(struct acpi_device *device); static int acpi_video_bus_remove(struct acpi_device *device, int type); static int acpi_video_resume(struct acpi_device *device); +static void acpi_video_bus_notify(struct acpi_device *device, u32 event); static const struct acpi_device_id video_device_ids[] = { {ACPI_VIDEO_HID, 0}, @@ -94,6 +95,7 @@ static struct acpi_driver acpi_video_bus = { .add = acpi_video_bus_add, .remove = acpi_video_bus_remove, .resume = acpi_video_resume, + .notify = acpi_video_bus_notify, }, }; @@ -1986,17 +1988,15 @@ static int acpi_video_bus_stop_devices(struct acpi_video_bus *video) return acpi_video_bus_DOS(video, 0, 1); } -static void acpi_video_bus_notify(acpi_handle handle, u32 event, void *data) +static void acpi_video_bus_notify(struct acpi_device *device, u32 event) { - struct acpi_video_bus *video = data; - struct acpi_device *device = NULL; + struct acpi_video_bus *video = acpi_driver_data(device); struct input_dev *input; int keycode; if (!video) return; - device = video->device; input = video->input; switch (event) { @@ -2127,7 +2127,6 @@ static int acpi_video_resume(struct acpi_device *device) static int acpi_video_bus_add(struct acpi_device *device) { - acpi_status status; struct acpi_video_bus *video; struct input_dev *input; int error; @@ -2169,20 +2168,10 @@ static int acpi_video_bus_add(struct acpi_device *device) acpi_video_bus_get_devices(video, device); acpi_video_bus_start_devices(video); - status = acpi_install_notify_handler(device->handle, - ACPI_DEVICE_NOTIFY, - acpi_video_bus_notify, video); - if (ACPI_FAILURE(status)) { - printk(KERN_ERR PREFIX - "Error installing notify handler\n"); - error = -ENODEV; - goto err_stop_video; - } - video->input = input = input_allocate_device(); if (!input) { error = -ENOMEM; - goto err_uninstall_notify; + goto err_stop_video; } snprintf(video->phys, sizeof(video->phys), @@ -2218,9 +2207,6 @@ static int acpi_video_bus_add(struct acpi_device *device) err_free_input_dev: input_free_device(input); - err_uninstall_notify: - acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, - acpi_video_bus_notify); err_stop_video: acpi_video_bus_stop_devices(video); acpi_video_bus_put_devices(video); @@ -2235,7 +2221,6 @@ static int acpi_video_bus_add(struct acpi_device *device) static int acpi_video_bus_remove(struct acpi_device *device, int type) { - acpi_status status = 0; struct acpi_video_bus *video = NULL; @@ -2245,11 +2230,6 @@ static int acpi_video_bus_remove(struct acpi_device *device, int type) video = acpi_driver_data(device); acpi_video_bus_stop_devices(video); - - status = acpi_remove_notify_handler(video->device->handle, - ACPI_DEVICE_NOTIFY, - acpi_video_bus_notify); - acpi_video_bus_put_devices(video); acpi_video_bus_remove_fs(device); diff --git a/drivers/acpi/wakeup.c b/drivers/acpi/wakeup.c index 5aee8c26cc9..88725dcdf8b 100644 --- a/drivers/acpi/wakeup.c +++ b/drivers/acpi/wakeup.c @@ -12,12 +12,14 @@ #include "internal.h" #include "sleep.h" +/* + * We didn't lock acpi_device_lock in the file, because it invokes oops in + * suspend/resume and isn't really required as this is called in S-state. At + * that time, there is no device hotplug + **/ #define _COMPONENT ACPI_SYSTEM_COMPONENT ACPI_MODULE_NAME("wakeup_devices") -extern struct list_head acpi_wakeup_device_list; -extern spinlock_t acpi_device_lock; - /** * acpi_enable_wakeup_device_prep - prepare wakeup devices * @sleep_state: ACPI state @@ -29,7 +31,6 @@ void acpi_enable_wakeup_device_prep(u8 sleep_state) { struct list_head *node, *next; - spin_lock(&acpi_device_lock); list_for_each_safe(node, next, &acpi_wakeup_device_list) { struct acpi_device *dev = container_of(node, struct acpi_device, @@ -40,11 +41,8 @@ void acpi_enable_wakeup_device_prep(u8 sleep_state) (sleep_state > (u32) dev->wakeup.sleep_state)) continue; - spin_unlock(&acpi_device_lock); acpi_enable_wakeup_device_power(dev, sleep_state); - spin_lock(&acpi_device_lock); } - spin_unlock(&acpi_device_lock); } /** @@ -60,7 +58,6 @@ void acpi_enable_wakeup_device(u8 sleep_state) * Caution: this routine must be invoked when interrupt is disabled * Refer ACPI2.0: P212 */ - spin_lock(&acpi_device_lock); list_for_each_safe(node, next, &acpi_wakeup_device_list) { struct acpi_device *dev = container_of(node, struct acpi_device, wakeup_list); @@ -74,22 +71,17 @@ void acpi_enable_wakeup_device(u8 sleep_state) if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared) || sleep_state > (u32) dev->wakeup.sleep_state) { if (dev->wakeup.flags.run_wake) { - spin_unlock(&acpi_device_lock); /* set_gpe_type will disable GPE, leave it like that */ acpi_set_gpe_type(dev->wakeup.gpe_device, dev->wakeup.gpe_number, ACPI_GPE_TYPE_RUNTIME); - spin_lock(&acpi_device_lock); } continue; } - spin_unlock(&acpi_device_lock); if (!dev->wakeup.flags.run_wake) acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); - spin_lock(&acpi_device_lock); } - spin_unlock(&acpi_device_lock); } /** @@ -101,7 +93,6 @@ void acpi_disable_wakeup_device(u8 sleep_state) { struct list_head *node, *next; - spin_lock(&acpi_device_lock); list_for_each_safe(node, next, &acpi_wakeup_device_list) { struct acpi_device *dev = container_of(node, struct acpi_device, wakeup_list); @@ -112,19 +103,16 @@ void acpi_disable_wakeup_device(u8 sleep_state) if ((!dev->wakeup.state.enabled && !dev->wakeup.flags.prepared) || sleep_state > (u32) dev->wakeup.sleep_state) { if (dev->wakeup.flags.run_wake) { - spin_unlock(&acpi_device_lock); acpi_set_gpe_type(dev->wakeup.gpe_device, dev->wakeup.gpe_number, ACPI_GPE_TYPE_WAKE_RUN); /* Re-enable it, since set_gpe_type will disable it */ acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); - spin_lock(&acpi_device_lock); } continue; } - spin_unlock(&acpi_device_lock); acpi_disable_wakeup_device_power(dev); /* Never disable run-wake GPE */ if (!dev->wakeup.flags.run_wake) { @@ -133,16 +121,14 @@ void acpi_disable_wakeup_device(u8 sleep_state) acpi_clear_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number, ACPI_NOT_ISR); } - spin_lock(&acpi_device_lock); } - spin_unlock(&acpi_device_lock); } int __init acpi_wakeup_device_init(void) { struct list_head *node, *next; - spin_lock(&acpi_device_lock); + mutex_lock(&acpi_device_lock); list_for_each_safe(node, next, &acpi_wakeup_device_list) { struct acpi_device *dev = container_of(node, struct acpi_device, @@ -150,15 +136,13 @@ int __init acpi_wakeup_device_init(void) /* In case user doesn't load button driver */ if (!dev->wakeup.flags.run_wake || dev->wakeup.state.enabled) continue; - spin_unlock(&acpi_device_lock); acpi_set_gpe_type(dev->wakeup.gpe_device, dev->wakeup.gpe_number, ACPI_GPE_TYPE_WAKE_RUN); acpi_enable_gpe(dev->wakeup.gpe_device, dev->wakeup.gpe_number); dev->wakeup.state.enabled = 1; - spin_lock(&acpi_device_lock); } - spin_unlock(&acpi_device_lock); + mutex_unlock(&acpi_device_lock); return 0; } diff --git a/drivers/mmc/core/mmc.c b/drivers/mmc/core/mmc.c index c232d11a7ed..06084dbf127 100644 --- a/drivers/mmc/core/mmc.c +++ b/drivers/mmc/core/mmc.c @@ -208,7 +208,7 @@ static int mmc_read_ext_csd(struct mmc_card *card) } ext_csd_struct = ext_csd[EXT_CSD_REV]; - if (ext_csd_struct > 2) { + if (ext_csd_struct > 3) { printk(KERN_ERR "%s: unrecognised EXT_CSD structure " "version %d\n", mmc_hostname(card->host), ext_csd_struct); diff --git a/drivers/mmc/core/sd.c b/drivers/mmc/core/sd.c index 26fc098d77c..cd81c395e16 100644 --- a/drivers/mmc/core/sd.c +++ b/drivers/mmc/core/sd.c @@ -363,15 +363,6 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, goto err; /* - * For SPI, enable CRC as appropriate. - */ - if (mmc_host_is_spi(host)) { - err = mmc_spi_set_crc(host, use_spi_crc); - if (err) - goto err; - } - - /* * Fetch CID from card. */ if (mmc_host_is_spi(host)) @@ -458,6 +449,18 @@ static int mmc_sd_init_card(struct mmc_host *host, u32 ocr, } /* + * For SPI, enable CRC as appropriate. + * This CRC enable is located AFTER the reading of the + * card registers because some SDHC cards are not able + * to provide valid CRCs for non-512-byte blocks. + */ + if (mmc_host_is_spi(host)) { + err = mmc_spi_set_crc(host, use_spi_crc); + if (err) + goto free_card; + } + + /* * Attempt to change to high-speed (if supported) */ err = mmc_switch_hs(card); diff --git a/drivers/mmc/host/imxmmc.c b/drivers/mmc/host/imxmmc.c index eb29b1d933a..e0be21a4a69 100644 --- a/drivers/mmc/host/imxmmc.c +++ b/drivers/mmc/host/imxmmc.c @@ -307,13 +307,6 @@ static void imxmci_setup_data(struct imxmci_host *host, struct mmc_data *data) wmb(); - if (host->actual_bus_width == MMC_BUS_WIDTH_4) - BLR(host->dma) = 0; /* burst 64 byte read / 64 bytes write */ - else - BLR(host->dma) = 16; /* burst 16 byte read / 16 bytes write */ - - RSSR(host->dma) = DMA_REQ_SDHC; - set_bit(IMXMCI_PEND_DMA_DATA_b, &host->pending_events); clear_bit(IMXMCI_PEND_CPU_DATA_b, &host->pending_events); @@ -818,9 +811,11 @@ static void imxmci_set_ios(struct mmc_host *mmc, struct mmc_ios *ios) if (ios->bus_width == MMC_BUS_WIDTH_4) { host->actual_bus_width = MMC_BUS_WIDTH_4; imx_gpio_mode(PB11_PF_SD_DAT3); + BLR(host->dma) = 0; /* burst 64 byte read/write */ } else { host->actual_bus_width = MMC_BUS_WIDTH_1; imx_gpio_mode(GPIO_PORTB | GPIO_IN | GPIO_PUEN | 11); + BLR(host->dma) = 16; /* burst 16 byte read/write */ } if (host->power_mode != ios->power_mode) { @@ -938,7 +933,7 @@ static void imxmci_check_status(unsigned long data) mod_timer(&host->timer, jiffies + (HZ>>1)); } -static int imxmci_probe(struct platform_device *pdev) +static int __init imxmci_probe(struct platform_device *pdev) { struct mmc_host *mmc; struct imxmci_host *host = NULL; @@ -1034,6 +1029,7 @@ static int imxmci_probe(struct platform_device *pdev) } host->dma_allocated = 1; imx_dma_setup_handlers(host->dma, imxmci_dma_irq, NULL, host); + RSSR(host->dma) = DMA_REQ_SDHC; tasklet_init(&host->tasklet, imxmci_tasklet_fnc, (unsigned long)host); host->status_reg=0; @@ -1079,7 +1075,7 @@ out: return ret; } -static int imxmci_remove(struct platform_device *pdev) +static int __exit imxmci_remove(struct platform_device *pdev) { struct mmc_host *mmc = platform_get_drvdata(pdev); @@ -1145,8 +1141,7 @@ static int imxmci_resume(struct platform_device *dev) #endif /* CONFIG_PM */ static struct platform_driver imxmci_driver = { - .probe = imxmci_probe, - .remove = imxmci_remove, + .remove = __exit_p(imxmci_remove), .suspend = imxmci_suspend, .resume = imxmci_resume, .driver = { @@ -1157,7 +1152,7 @@ static struct platform_driver imxmci_driver = { static int __init imxmci_init(void) { - return platform_driver_register(&imxmci_driver); + return platform_driver_probe(&imxmci_driver, imxmci_probe); } static void __exit imxmci_exit(void) diff --git a/drivers/mmc/host/mmc_spi.c b/drivers/mmc/host/mmc_spi.c index 72f8bde4877..f48349d18c9 100644 --- a/drivers/mmc/host/mmc_spi.c +++ b/drivers/mmc/host/mmc_spi.c @@ -24,7 +24,7 @@ * along with this program; if not, write to the Free Software * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. */ -#include <linux/hrtimer.h> +#include <linux/sched.h> #include <linux/delay.h> #include <linux/bio.h> #include <linux/dma-mapping.h> @@ -95,7 +95,7 @@ * reads which takes nowhere near that long. Older cards may be able to use * shorter timeouts ... but why bother? */ -#define r1b_timeout ktime_set(3, 0) +#define r1b_timeout (HZ * 3) /****************************************************************************/ @@ -183,12 +183,11 @@ mmc_spi_readbytes(struct mmc_spi_host *host, unsigned len) return status; } -static int -mmc_spi_skip(struct mmc_spi_host *host, ktime_t timeout, unsigned n, u8 byte) +static int mmc_spi_skip(struct mmc_spi_host *host, unsigned long timeout, + unsigned n, u8 byte) { u8 *cp = host->data->status; - - timeout = ktime_add(timeout, ktime_get()); + unsigned long start = jiffies; while (1) { int status; @@ -203,22 +202,26 @@ mmc_spi_skip(struct mmc_spi_host *host, ktime_t timeout, unsigned n, u8 byte) return cp[i]; } - /* REVISIT investigate msleep() to avoid busy-wait I/O - * in at least some cases. - */ - if (ktime_to_ns(ktime_sub(ktime_get(), timeout)) > 0) + if (time_is_before_jiffies(start + timeout)) break; + + /* If we need long timeouts, we may release the CPU. + * We use jiffies here because we want to have a relation + * between elapsed time and the blocking of the scheduler. + */ + if (time_is_before_jiffies(start+1)) + schedule(); } return -ETIMEDOUT; } static inline int -mmc_spi_wait_unbusy(struct mmc_spi_host *host, ktime_t timeout) +mmc_spi_wait_unbusy(struct mmc_spi_host *host, unsigned long timeout) { return mmc_spi_skip(host, timeout, sizeof(host->data->status), 0); } -static int mmc_spi_readtoken(struct mmc_spi_host *host, ktime_t timeout) +static int mmc_spi_readtoken(struct mmc_spi_host *host, unsigned long timeout) { return mmc_spi_skip(host, timeout, 1, 0xff); } @@ -251,6 +254,10 @@ static int mmc_spi_response_get(struct mmc_spi_host *host, u8 *cp = host->data->status; u8 *end = cp + host->t.len; int value = 0; + int bitshift; + u8 leftover = 0; + unsigned short rotator; + int i; char tag[32]; snprintf(tag, sizeof(tag), " ... CMD%d response SPI_%s", @@ -268,9 +275,8 @@ static int mmc_spi_response_get(struct mmc_spi_host *host, /* Data block reads (R1 response types) may need more data... */ if (cp == end) { - unsigned i; - cp = host->data->status; + end = cp+1; /* Card sends N(CR) (== 1..8) bytes of all-ones then one * status byte ... and we already scanned 2 bytes. @@ -295,20 +301,34 @@ static int mmc_spi_response_get(struct mmc_spi_host *host, } checkstatus: - if (*cp & 0x80) { - dev_dbg(&host->spi->dev, "%s: INVALID RESPONSE, %02x\n", - tag, *cp); - value = -EBADR; - goto done; + bitshift = 0; + if (*cp & 0x80) { + /* Houston, we have an ugly card with a bit-shifted response */ + rotator = *cp++ << 8; + /* read the next byte */ + if (cp == end) { + value = mmc_spi_readbytes(host, 1); + if (value < 0) + goto done; + cp = host->data->status; + end = cp+1; + } + rotator |= *cp++; + while (rotator & 0x8000) { + bitshift++; + rotator <<= 1; + } + cmd->resp[0] = rotator >> 8; + leftover = rotator; + } else { + cmd->resp[0] = *cp++; } - - cmd->resp[0] = *cp++; cmd->error = 0; /* Status byte: the entire seven-bit R1 response. */ if (cmd->resp[0] != 0) { if ((R1_SPI_PARAMETER | R1_SPI_ADDRESS - | R1_SPI_ILLEGAL_COMMAND) + | R1_SPI_ILLEGAL_COMMAND) & cmd->resp[0]) value = -EINVAL; else if (R1_SPI_COM_CRC & cmd->resp[0]) @@ -336,12 +356,45 @@ checkstatus: * SPI R5 == R1 + data byte; IO_RW_DIRECT */ case MMC_RSP_SPI_R2: - cmd->resp[0] |= *cp << 8; + /* read the next byte */ + if (cp == end) { + value = mmc_spi_readbytes(host, 1); + if (value < 0) + goto done; + cp = host->data->status; + end = cp+1; + } + if (bitshift) { + rotator = leftover << 8; + rotator |= *cp << bitshift; + cmd->resp[0] |= (rotator & 0xFF00); + } else { + cmd->resp[0] |= *cp << 8; + } break; /* SPI R3, R4, or R7 == R1 + 4 bytes */ case MMC_RSP_SPI_R3: - cmd->resp[1] = get_unaligned_be32(cp); + rotator = leftover << 8; + cmd->resp[1] = 0; + for (i = 0; i < 4; i++) { + cmd->resp[1] <<= 8; + /* read the next byte */ + if (cp == end) { + value = mmc_spi_readbytes(host, 1); + if (value < 0) + goto done; + cp = host->data->status; + end = cp+1; + } + if (bitshift) { + rotator |= *cp++ << bitshift; + cmd->resp[1] |= (rotator >> 8); + rotator <<= 8; + } else { + cmd->resp[1] |= *cp++; + } + } break; /* SPI R1 == just one status byte */ @@ -607,7 +660,7 @@ mmc_spi_setup_data_message( */ static int mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t, - ktime_t timeout) + unsigned long timeout) { struct spi_device *spi = host->spi; int status, i; @@ -717,11 +770,13 @@ mmc_spi_writeblock(struct mmc_spi_host *host, struct spi_transfer *t, */ static int mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t, - ktime_t timeout) + unsigned long timeout) { struct spi_device *spi = host->spi; int status; struct scratch *scratch = host->data; + unsigned int bitshift; + u8 leftover; /* At least one SD card sends an all-zeroes byte when N(CX) * applies, before the all-ones bytes ... just cope with that. @@ -733,38 +788,60 @@ mmc_spi_readblock(struct mmc_spi_host *host, struct spi_transfer *t, if (status == 0xff || status == 0) status = mmc_spi_readtoken(host, timeout); - if (status == SPI_TOKEN_SINGLE) { - if (host->dma_dev) { - dma_sync_single_for_device(host->dma_dev, - host->data_dma, sizeof(*scratch), - DMA_BIDIRECTIONAL); - dma_sync_single_for_device(host->dma_dev, - t->rx_dma, t->len, - DMA_FROM_DEVICE); - } + if (status < 0) { + dev_dbg(&spi->dev, "read error %02x (%d)\n", status, status); + return status; + } - status = spi_sync(spi, &host->m); + /* The token may be bit-shifted... + * the first 0-bit precedes the data stream. + */ + bitshift = 7; + while (status & 0x80) { + status <<= 1; + bitshift--; + } + leftover = status << 1; - if (host->dma_dev) { - dma_sync_single_for_cpu(host->dma_dev, - host->data_dma, sizeof(*scratch), - DMA_BIDIRECTIONAL); - dma_sync_single_for_cpu(host->dma_dev, - t->rx_dma, t->len, - DMA_FROM_DEVICE); - } + if (host->dma_dev) { + dma_sync_single_for_device(host->dma_dev, + host->data_dma, sizeof(*scratch), + DMA_BIDIRECTIONAL); + dma_sync_single_for_device(host->dma_dev, + t->rx_dma, t->len, + DMA_FROM_DEVICE); + } - } else { - dev_dbg(&spi->dev, "read error %02x (%d)\n", status, status); + status = spi_sync(spi, &host->m); - /* we've read extra garbage, timed out, etc */ - if (status < 0) - return status; + if (host->dma_dev) { + dma_sync_single_for_cpu(host->dma_dev, + host->data_dma, sizeof(*scratch), + DMA_BIDIRECTIONAL); + dma_sync_single_for_cpu(host->dma_dev, + t->rx_dma, t->len, + DMA_FROM_DEVICE); + } - /* low four bits are an R2 subset, fifth seems to be - * vendor specific ... map them all to generic error.. + if (bitshift) { + /* Walk through the data and the crc and do + * all the magic to get byte-aligned data. */ - return -EIO; + u8 *cp = t->rx_buf; + unsigned int len; + unsigned int bitright = 8 - bitshift; + u8 temp; + for (len = t->len; len; len--) { + temp = *cp; + *cp++ = leftover | (temp >> bitshift); + leftover = temp << bitright; + } + cp = (u8 *) &scratch->crc_val; + temp = *cp; + *cp++ = leftover | (temp >> bitshift); + leftover = temp << bitright; + temp = *cp; + *cp = leftover | (temp >> bitshift); } if (host->mmc->use_spi_crc) { @@ -803,7 +880,7 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd, unsigned n_sg; int multiple = (data->blocks > 1); u32 clock_rate; - ktime_t timeout; + unsigned long timeout; if (data->flags & MMC_DATA_READ) direction = DMA_FROM_DEVICE; @@ -817,8 +894,9 @@ mmc_spi_data_do(struct mmc_spi_host *host, struct mmc_command *cmd, else clock_rate = spi->max_speed_hz; - timeout = ktime_add_ns(ktime_set(0, 0), data->timeout_ns + - data->timeout_clks * 1000000 / clock_rate); + timeout = data->timeout_ns + + data->timeout_clks * 1000000 / clock_rate; + timeout = usecs_to_jiffies((unsigned int)(timeout / 1000)) + 1; /* Handle scatterlist segments one at a time, with synch for * each 512-byte block diff --git a/drivers/mmc/host/omap_hsmmc.c b/drivers/mmc/host/omap_hsmmc.c index d183be6f2a5..e62a22a7f00 100644 --- a/drivers/mmc/host/omap_hsmmc.c +++ b/drivers/mmc/host/omap_hsmmc.c @@ -298,7 +298,6 @@ mmc_omap_xfer_done(struct mmc_omap_host *host, struct mmc_data *data) struct mmc_request *mrq = host->mrq; host->mrq = NULL; - mmc_omap_fclk_lazy_disable(host); mmc_request_done(host->mmc, mrq); return; } @@ -434,6 +433,8 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) if (host->mrq == NULL) { OMAP_HSMMC_WRITE(host->base, STAT, OMAP_HSMMC_READ(host->base, STAT)); + /* Flush posted write */ + OMAP_HSMMC_READ(host->base, STAT); return IRQ_HANDLED; } @@ -489,8 +490,10 @@ static irqreturn_t mmc_omap_irq(int irq, void *dev_id) } OMAP_HSMMC_WRITE(host->base, STAT, status); + /* Flush posted write */ + OMAP_HSMMC_READ(host->base, STAT); - if (end_cmd || (status & CC)) + if (end_cmd || ((status & CC) && host->cmd)) mmc_omap_cmd_done(host, host->cmd); if (end_trans || (status & TC)) mmc_omap_xfer_done(host, data); diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index c5b316e2237..cd37962ec44 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -729,6 +729,6 @@ static void __exit sdhci_drv_exit(void) module_init(sdhci_drv_init); module_exit(sdhci_drv_exit); -MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>"); +MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>"); MODULE_DESCRIPTION("Secure Digital Host Controller Interface PCI driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/mmc/host/sdhci.c b/drivers/mmc/host/sdhci.c index 30d8e3d4e6f..9234be2226e 100644 --- a/drivers/mmc/host/sdhci.c +++ b/drivers/mmc/host/sdhci.c @@ -1935,7 +1935,7 @@ module_exit(sdhci_drv_exit); module_param(debug_quirks, uint, 0444); -MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>"); +MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>"); MODULE_DESCRIPTION("Secure Digital Host Controller Interface core driver"); MODULE_LICENSE("GPL"); diff --git a/drivers/mmc/host/wbsd.c b/drivers/mmc/host/wbsd.c index adda3795203..89bf8cd25ca 100644 --- a/drivers/mmc/host/wbsd.c +++ b/drivers/mmc/host/wbsd.c @@ -2036,7 +2036,7 @@ module_param_named(irq, param_irq, uint, 0444); module_param_named(dma, param_dma, int, 0444); MODULE_LICENSE("GPL"); -MODULE_AUTHOR("Pierre Ossman <drzeus@drzeus.cx>"); +MODULE_AUTHOR("Pierre Ossman <pierre@ossman.eu>"); MODULE_DESCRIPTION("Winbond W83L51xD SD/MMC card interface driver"); #ifdef CONFIG_PNP diff --git a/drivers/platform/x86/fujitsu-laptop.c b/drivers/platform/x86/fujitsu-laptop.c index 45940f31fe9..218b9a16ac3 100644 --- a/drivers/platform/x86/fujitsu-laptop.c +++ b/drivers/platform/x86/fujitsu-laptop.c @@ -174,8 +174,7 @@ struct fujitsu_hotkey_t { static struct fujitsu_hotkey_t *fujitsu_hotkey; -static void acpi_fujitsu_hotkey_notify(acpi_handle handle, u32 event, - void *data); +static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event); #ifdef CONFIG_LEDS_CLASS static enum led_brightness logolamp_get(struct led_classdev *cdev); @@ -203,7 +202,7 @@ struct led_classdev kblamps_led = { static u32 dbg_level = 0x03; #endif -static void acpi_fujitsu_notify(acpi_handle handle, u32 event, void *data); +static void acpi_fujitsu_notify(struct acpi_device *device, u32 event); /* Fujitsu ACPI interface function */ @@ -658,7 +657,6 @@ static struct dmi_system_id fujitsu_dmi_table[] = { static int acpi_fujitsu_add(struct acpi_device *device) { - acpi_status status; acpi_handle handle; int result = 0; int state = 0; @@ -673,20 +671,10 @@ static int acpi_fujitsu_add(struct acpi_device *device) sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS); device->driver_data = fujitsu; - status = acpi_install_notify_handler(device->handle, - ACPI_DEVICE_NOTIFY, - acpi_fujitsu_notify, fujitsu); - - if (ACPI_FAILURE(status)) { - printk(KERN_ERR "Error installing notify handler\n"); - error = -ENODEV; - goto err_stop; - } - fujitsu->input = input = input_allocate_device(); if (!input) { error = -ENOMEM; - goto err_uninstall_notify; + goto err_stop; } snprintf(fujitsu->phys, sizeof(fujitsu->phys), @@ -743,9 +731,6 @@ static int acpi_fujitsu_add(struct acpi_device *device) end: err_free_input_dev: input_free_device(input); -err_uninstall_notify: - acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, - acpi_fujitsu_notify); err_stop: return result; @@ -753,7 +738,6 @@ err_stop: static int acpi_fujitsu_remove(struct acpi_device *device, int type) { - acpi_status status; struct fujitsu_t *fujitsu = NULL; if (!device || !acpi_driver_data(device)) @@ -761,10 +745,6 @@ static int acpi_fujitsu_remove(struct acpi_device *device, int type) fujitsu = acpi_driver_data(device); - status = acpi_remove_notify_handler(fujitsu->acpi_handle, - ACPI_DEVICE_NOTIFY, - acpi_fujitsu_notify); - if (!device || !acpi_driver_data(device)) return -EINVAL; @@ -775,7 +755,7 @@ static int acpi_fujitsu_remove(struct acpi_device *device, int type) /* Brightness notify */ -static void acpi_fujitsu_notify(acpi_handle handle, u32 event, void *data) +static void acpi_fujitsu_notify(struct acpi_device *device, u32 event) { struct input_dev *input; int keycode; @@ -829,15 +809,12 @@ static void acpi_fujitsu_notify(acpi_handle handle, u32 event, void *data) input_report_key(input, keycode, 0); input_sync(input); } - - return; } /* ACPI device for hotkey handling */ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) { - acpi_status status; acpi_handle handle; int result = 0; int state = 0; @@ -854,17 +831,6 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) sprintf(acpi_device_class(device), "%s", ACPI_FUJITSU_CLASS); device->driver_data = fujitsu_hotkey; - status = acpi_install_notify_handler(device->handle, - ACPI_DEVICE_NOTIFY, - acpi_fujitsu_hotkey_notify, - fujitsu_hotkey); - - if (ACPI_FAILURE(status)) { - printk(KERN_ERR "Error installing notify handler\n"); - error = -ENODEV; - goto err_stop; - } - /* kfifo */ spin_lock_init(&fujitsu_hotkey->fifo_lock); fujitsu_hotkey->fifo = @@ -879,7 +845,7 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) fujitsu_hotkey->input = input = input_allocate_device(); if (!input) { error = -ENOMEM; - goto err_uninstall_notify; + goto err_free_fifo; } snprintf(fujitsu_hotkey->phys, sizeof(fujitsu_hotkey->phys), @@ -975,9 +941,7 @@ static int acpi_fujitsu_hotkey_add(struct acpi_device *device) end: err_free_input_dev: input_free_device(input); -err_uninstall_notify: - acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, - acpi_fujitsu_hotkey_notify); +err_free_fifo: kfifo_free(fujitsu_hotkey->fifo); err_stop: @@ -986,7 +950,6 @@ err_stop: static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type) { - acpi_status status; struct fujitsu_hotkey_t *fujitsu_hotkey = NULL; if (!device || !acpi_driver_data(device)) @@ -994,10 +957,6 @@ static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type) fujitsu_hotkey = acpi_driver_data(device); - status = acpi_remove_notify_handler(fujitsu_hotkey->acpi_handle, - ACPI_DEVICE_NOTIFY, - acpi_fujitsu_hotkey_notify); - fujitsu_hotkey->acpi_handle = NULL; kfifo_free(fujitsu_hotkey->fifo); @@ -1005,8 +964,7 @@ static int acpi_fujitsu_hotkey_remove(struct acpi_device *device, int type) return 0; } -static void acpi_fujitsu_hotkey_notify(acpi_handle handle, u32 event, - void *data) +static void acpi_fujitsu_hotkey_notify(struct acpi_device *device, u32 event) { struct input_dev *input; int keycode, keycode_r; @@ -1089,8 +1047,6 @@ static void acpi_fujitsu_hotkey_notify(acpi_handle handle, u32 event, input_sync(input); break; } - - return; } /* Initialization */ @@ -1107,6 +1063,7 @@ static struct acpi_driver acpi_fujitsu_driver = { .ops = { .add = acpi_fujitsu_add, .remove = acpi_fujitsu_remove, + .notify = acpi_fujitsu_notify, }, }; @@ -1122,6 +1079,7 @@ static struct acpi_driver acpi_fujitsu_hotkey_driver = { .ops = { .add = acpi_fujitsu_hotkey_add, .remove = acpi_fujitsu_hotkey_remove, + .notify = acpi_fujitsu_hotkey_notify, }, }; diff --git a/drivers/platform/x86/panasonic-laptop.c b/drivers/platform/x86/panasonic-laptop.c index a5ce4bc202e..fe7cf0188ac 100644 --- a/drivers/platform/x86/panasonic-laptop.c +++ b/drivers/platform/x86/panasonic-laptop.c @@ -176,6 +176,7 @@ enum SINF_BITS { SINF_NUM_BATTERIES = 0, static int acpi_pcc_hotkey_add(struct acpi_device *device); static int acpi_pcc_hotkey_remove(struct acpi_device *device, int type); static int acpi_pcc_hotkey_resume(struct acpi_device *device); +static void acpi_pcc_hotkey_notify(struct acpi_device *device, u32 event); static const struct acpi_device_id pcc_device_ids[] = { { "MAT0012", 0}, @@ -194,6 +195,7 @@ static struct acpi_driver acpi_pcc_driver = { .add = acpi_pcc_hotkey_add, .remove = acpi_pcc_hotkey_remove, .resume = acpi_pcc_hotkey_resume, + .notify = acpi_pcc_hotkey_notify, }, }; @@ -271,7 +273,7 @@ static int acpi_pcc_retrieve_biosdata(struct pcc_acpi *pcc, u32 *sinf) union acpi_object *hkey = NULL; int i; - status = acpi_evaluate_object(pcc->handle, METHOD_HKEY_SINF, 0, + status = acpi_evaluate_object(pcc->handle, METHOD_HKEY_SINF, NULL, &buffer); if (ACPI_FAILURE(status)) { ACPI_DEBUG_PRINT((ACPI_DB_ERROR, @@ -527,9 +529,9 @@ static void acpi_pcc_generate_keyinput(struct pcc_acpi *pcc) return; } -static void acpi_pcc_hotkey_notify(acpi_handle handle, u32 event, void *data) +static void acpi_pcc_hotkey_notify(struct acpi_device *device, u32 event) { - struct pcc_acpi *pcc = (struct pcc_acpi *) data; + struct pcc_acpi *pcc = acpi_driver_data(device); switch (event) { case HKEY_NOTIFY: @@ -599,7 +601,6 @@ static int acpi_pcc_hotkey_resume(struct acpi_device *device) static int acpi_pcc_hotkey_add(struct acpi_device *device) { - acpi_status status; struct pcc_acpi *pcc; int num_sifr, result; @@ -640,22 +641,11 @@ static int acpi_pcc_hotkey_add(struct acpi_device *device) goto out_sinf; } - /* initialize hotkey input device */ - status = acpi_install_notify_handler(pcc->handle, ACPI_DEVICE_NOTIFY, - acpi_pcc_hotkey_notify, pcc); - - if (ACPI_FAILURE(status)) { - ACPI_DEBUG_PRINT((ACPI_DB_ERROR, - "Error installing notify handler\n")); - result = -ENODEV; - goto out_input; - } - /* initialize backlight */ pcc->backlight = backlight_device_register("panasonic", NULL, pcc, &pcc_backlight_ops); if (IS_ERR(pcc->backlight)) - goto out_notify; + goto out_input; if (!acpi_pcc_retrieve_biosdata(pcc, pcc->sinf)) { ACPI_DEBUG_PRINT((ACPI_DB_ERROR, @@ -680,9 +670,6 @@ static int acpi_pcc_hotkey_add(struct acpi_device *device) out_backlight: backlight_device_unregister(pcc->backlight); -out_notify: - acpi_remove_notify_handler(pcc->handle, ACPI_DEVICE_NOTIFY, - acpi_pcc_hotkey_notify); out_input: input_unregister_device(pcc->input_dev); /* no need to input_free_device() since core input API refcount and @@ -723,9 +710,6 @@ static int acpi_pcc_hotkey_remove(struct acpi_device *device, int type) backlight_device_unregister(pcc->backlight); - acpi_remove_notify_handler(pcc->handle, ACPI_DEVICE_NOTIFY, - acpi_pcc_hotkey_notify); - input_unregister_device(pcc->input_dev); /* no need to input_free_device() since core input API refcount and * free()s the device */ diff --git a/drivers/platform/x86/sony-laptop.c b/drivers/platform/x86/sony-laptop.c index a90ec5cb2f2..d3c92d777bd 100644 --- a/drivers/platform/x86/sony-laptop.c +++ b/drivers/platform/x86/sony-laptop.c @@ -914,7 +914,7 @@ static struct sony_nc_event sony_127_events[] = { /* * ACPI callbacks */ -static void sony_acpi_notify(acpi_handle handle, u32 event, void *data) +static void sony_nc_notify(struct acpi_device *device, u32 event) { u32 ev = event; @@ -933,7 +933,7 @@ static void sony_acpi_notify(acpi_handle handle, u32 event, void *data) struct sony_nc_event *key_event; if (sony_call_snc_handle(key_handle, 0x200, &result)) { - dprintk("sony_acpi_notify, unable to decode" + dprintk("sony_nc_notify, unable to decode" " event 0x%.2x 0x%.2x\n", key_handle, ev); /* restore the original event */ @@ -968,7 +968,7 @@ static void sony_acpi_notify(acpi_handle handle, u32 event, void *data) } else sony_laptop_report_input_event(ev); - dprintk("sony_acpi_notify, event: 0x%.2x\n", ev); + dprintk("sony_nc_notify, event: 0x%.2x\n", ev); acpi_bus_generate_proc_event(sony_nc_acpi_device, 1, ev); } @@ -1276,15 +1276,6 @@ static int sony_nc_add(struct acpi_device *device) goto outwalk; } - status = acpi_install_notify_handler(sony_nc_acpi_handle, - ACPI_DEVICE_NOTIFY, - sony_acpi_notify, NULL); - if (ACPI_FAILURE(status)) { - printk(KERN_WARNING DRV_PFX "unable to install notify handler (%u)\n", status); - result = -ENODEV; - goto outinput; - } - if (acpi_video_backlight_support()) { printk(KERN_INFO DRV_PFX "brightness ignored, must be " "controlled by ACPI video driver\n"); @@ -1362,13 +1353,6 @@ static int sony_nc_add(struct acpi_device *device) if (sony_backlight_device) backlight_device_unregister(sony_backlight_device); - status = acpi_remove_notify_handler(sony_nc_acpi_handle, - ACPI_DEVICE_NOTIFY, - sony_acpi_notify); - if (ACPI_FAILURE(status)) - printk(KERN_WARNING DRV_PFX "unable to remove notify handler\n"); - - outinput: sony_laptop_remove_input(); outwalk: @@ -1378,7 +1362,6 @@ static int sony_nc_add(struct acpi_device *device) static int sony_nc_remove(struct acpi_device *device, int type) { - acpi_status status; struct sony_nc_value *item; if (sony_backlight_device) @@ -1386,12 +1369,6 @@ static int sony_nc_remove(struct acpi_device *device, int type) sony_nc_acpi_device = NULL; - status = acpi_remove_notify_handler(sony_nc_acpi_handle, - ACPI_DEVICE_NOTIFY, - sony_acpi_notify); - if (ACPI_FAILURE(status)) - printk(KERN_WARNING DRV_PFX "unable to remove notify handler\n"); - for (item = sony_nc_values; item->name; ++item) { device_remove_file(&sony_pf_device->dev, &item->devattr); } @@ -1425,6 +1402,7 @@ static struct acpi_driver sony_nc_driver = { .add = sony_nc_add, .remove = sony_nc_remove, .resume = sony_nc_resume, + .notify = sony_nc_notify, }, }; diff --git a/drivers/platform/x86/wmi.c b/drivers/platform/x86/wmi.c index 2f269e117b8..043b208d971 100644 --- a/drivers/platform/x86/wmi.c +++ b/drivers/platform/x86/wmi.c @@ -81,6 +81,7 @@ static struct wmi_block wmi_blocks; static int acpi_wmi_remove(struct acpi_device *device, int type); static int acpi_wmi_add(struct acpi_device *device); +static void acpi_wmi_notify(struct acpi_device *device, u32 event); static const struct acpi_device_id wmi_device_ids[] = { {"PNP0C14", 0}, @@ -96,6 +97,7 @@ static struct acpi_driver acpi_wmi_driver = { .ops = { .add = acpi_wmi_add, .remove = acpi_wmi_remove, + .notify = acpi_wmi_notify, }, }; @@ -643,12 +645,11 @@ acpi_wmi_ec_space_handler(u32 function, acpi_physical_address address, } } -static void acpi_wmi_notify(acpi_handle handle, u32 event, void *data) +static void acpi_wmi_notify(struct acpi_device *device, u32 event) { struct guid_block *block; struct wmi_block *wblock; struct list_head *p; - struct acpi_device *device = data; list_for_each(p, &wmi_blocks.list) { wblock = list_entry(p, struct wmi_block, list); @@ -669,9 +670,6 @@ static void acpi_wmi_notify(acpi_handle handle, u32 event, void *data) static int acpi_wmi_remove(struct acpi_device *device, int type) { - acpi_remove_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, - acpi_wmi_notify); - acpi_remove_address_space_handler(device->handle, ACPI_ADR_SPACE_EC, &acpi_wmi_ec_space_handler); @@ -683,13 +681,6 @@ static int __init acpi_wmi_add(struct acpi_device *device) acpi_status status; int result = 0; - status = acpi_install_notify_handler(device->handle, ACPI_DEVICE_NOTIFY, - acpi_wmi_notify, device); - if (ACPI_FAILURE(status)) { - printk(KERN_ERR PREFIX "Error installing notify handler\n"); - return -ENODEV; - } - status = acpi_install_address_space_handler(device->handle, ACPI_ADR_SPACE_EC, &acpi_wmi_ec_space_handler, diff --git a/drivers/serial/max3100.c b/drivers/serial/max3100.c new file mode 100644 index 00000000000..9fd33e5622b --- /dev/null +++ b/drivers/serial/max3100.c @@ -0,0 +1,927 @@ +/* + * + * Copyright (C) 2008 Christian Pellegrin <chripell@evolware.org> + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * + * Notes: the MAX3100 doesn't provide an interrupt on CTS so we have + * to use polling for flow control. TX empty IRQ is unusable, since + * writing conf clears FIFO buffer and we cannot have this interrupt + * always asking us for attention. + * + * Example platform data: + + static struct plat_max3100 max3100_plat_data = { + .loopback = 0, + .crystal = 0, + .poll_time = 100, + }; + + static struct spi_board_info spi_board_info[] = { + { + .modalias = "max3100", + .platform_data = &max3100_plat_data, + .irq = IRQ_EINT12, + .max_speed_hz = 5*1000*1000, + .chip_select = 0, + }, + }; + + * The initial minor number is 209 in the low-density serial port: + * mknod /dev/ttyMAX0 c 204 209 + */ + +#define MAX3100_MAJOR 204 +#define MAX3100_MINOR 209 +/* 4 MAX3100s should be enough for everyone */ +#define MAX_MAX3100 4 + +#include <linux/delay.h> +#include <linux/device.h> +#include <linux/serial_core.h> +#include <linux/serial.h> +#include <linux/spi/spi.h> +#include <linux/freezer.h> + +#include <linux/serial_max3100.h> + +#define MAX3100_C (1<<14) +#define MAX3100_D (0<<14) +#define MAX3100_W (1<<15) +#define MAX3100_RX (0<<15) + +#define MAX3100_WC (MAX3100_W | MAX3100_C) +#define MAX3100_RC (MAX3100_RX | MAX3100_C) +#define MAX3100_WD (MAX3100_W | MAX3100_D) +#define MAX3100_RD (MAX3100_RX | MAX3100_D) +#define MAX3100_CMD (3 << 14) + +#define MAX3100_T (1<<14) +#define MAX3100_R (1<<15) + +#define MAX3100_FEN (1<<13) +#define MAX3100_SHDN (1<<12) +#define MAX3100_TM (1<<11) +#define MAX3100_RM (1<<10) +#define MAX3100_PM (1<<9) +#define MAX3100_RAM (1<<8) +#define MAX3100_IR (1<<7) +#define MAX3100_ST (1<<6) +#define MAX3100_PE (1<<5) +#define MAX3100_L (1<<4) +#define MAX3100_BAUD (0xf) + +#define MAX3100_TE (1<<10) +#define MAX3100_RAFE (1<<10) +#define MAX3100_RTS (1<<9) +#define MAX3100_CTS (1<<9) +#define MAX3100_PT (1<<8) +#define MAX3100_DATA (0xff) + +#define MAX3100_RT (MAX3100_R | MAX3100_T) +#define MAX3100_RTC (MAX3100_RT | MAX3100_CTS | MAX3100_RAFE) + +/* the following simulate a status reg for ignore_status_mask */ +#define MAX3100_STATUS_PE 1 +#define MAX3100_STATUS_FE 2 +#define MAX3100_STATUS_OE 4 + +struct max3100_port { + struct uart_port port; + struct spi_device *spi; + + int cts; /* last CTS received for flow ctrl */ + int tx_empty; /* last TX empty bit */ + + spinlock_t conf_lock; /* shared data */ + int conf_commit; /* need to make changes */ + int conf; /* configuration for the MAX31000 + * (bits 0-7, bits 8-11 are irqs) */ + int rts_commit; /* need to change rts */ + int rts; /* rts status */ + int baud; /* current baud rate */ + + int parity; /* keeps track if we should send parity */ +#define MAX3100_PARITY_ON 1 +#define MAX3100_PARITY_ODD 2 +#define MAX3100_7BIT 4 + int rx_enabled; /* if we should rx chars */ + + int irq; /* irq assigned to the max3100 */ + + int minor; /* minor number */ + int crystal; /* 1 if 3.6864Mhz crystal 0 for 1.8432 */ + int loopback; /* 1 if we are in loopback mode */ + + /* for handling irqs: need workqueue since we do spi_sync */ + struct workqueue_struct *workqueue; + struct work_struct work; + /* set to 1 to make the workhandler exit as soon as possible */ + int force_end_work; + /* need to know we are suspending to avoid deadlock on workqueue */ + int suspending; + + /* hook for suspending MAX3100 via dedicated pin */ + void (*max3100_hw_suspend) (int suspend); + + /* poll time (in ms) for ctrl lines */ + int poll_time; + /* and its timer */ + struct timer_list timer; +}; + +static struct max3100_port *max3100s[MAX_MAX3100]; /* the chips */ +static DEFINE_MUTEX(max3100s_lock); /* race on probe */ + +static int max3100_do_parity(struct max3100_port *s, u16 c) +{ + int parity; + + if (s->parity & MAX3100_PARITY_ODD) + parity = 1; + else + parity = 0; + + if (s->parity & MAX3100_7BIT) + c &= 0x7f; + else + c &= 0xff; + + parity = parity ^ (hweight8(c) & 1); + return parity; +} + +static int max3100_check_parity(struct max3100_port *s, u16 c) +{ + return max3100_do_parity(s, c) == ((c >> 8) & 1); +} + +static void max3100_calc_parity(struct max3100_port *s, u16 *c) +{ + if (s->parity & MAX3100_7BIT) + *c &= 0x7f; + else + *c &= 0xff; + + if (s->parity & MAX3100_PARITY_ON) + *c |= max3100_do_parity(s, *c) << 8; +} + +static void max3100_work(struct work_struct *w); + +static void max3100_dowork(struct max3100_port *s) +{ + if (!s->force_end_work && !work_pending(&s->work) && + !freezing(current) && !s->suspending) + queue_work(s->workqueue, &s->work); +} + +static void max3100_timeout(unsigned long data) +{ + struct max3100_port *s = (struct max3100_port *)data; + + if (s->port.info) { + max3100_dowork(s); + mod_timer(&s->timer, jiffies + s->poll_time); + } +} + +static int max3100_sr(struct max3100_port *s, u16 tx, u16 *rx) +{ + struct spi_message message; + u16 etx, erx; + int status; + struct spi_transfer tran = { + .tx_buf = &etx, + .rx_buf = &erx, + .len = 2, + }; + + etx = cpu_to_be16(tx); + spi_message_init(&message); + spi_message_add_tail(&tran, &message); + status = spi_sync(s->spi, &message); + if (status) { + dev_warn(&s->spi->dev, "error while calling spi_sync\n"); + return -EIO; + } + *rx = be16_to_cpu(erx); + s->tx_empty = (*rx & MAX3100_T) > 0; + dev_dbg(&s->spi->dev, "%04x - %04x\n", tx, *rx); + return 0; +} + +static int max3100_handlerx(struct max3100_port *s, u16 rx) +{ + unsigned int ch, flg, status = 0; + int ret = 0, cts; + + if (rx & MAX3100_R && s->rx_enabled) { + dev_dbg(&s->spi->dev, "%s\n", __func__); + ch = rx & (s->parity & MAX3100_7BIT ? 0x7f : 0xff); + if (rx & MAX3100_RAFE) { + s->port.icount.frame++; + flg = TTY_FRAME; + status |= MAX3100_STATUS_FE; + } else { + if (s->parity & MAX3100_PARITY_ON) { + if (max3100_check_parity(s, rx)) { + s->port.icount.rx++; + flg = TTY_NORMAL; + } else { + s->port.icount.parity++; + flg = TTY_PARITY; + status |= MAX3100_STATUS_PE; + } + } else { + s->port.icount.rx++; + flg = TTY_NORMAL; + } + } + uart_insert_char(&s->port, status, MAX3100_STATUS_OE, ch, flg); + ret = 1; + } + + cts = (rx & MAX3100_CTS) > 0; + if (s->cts != cts) { + s->cts = cts; + uart_handle_cts_change(&s->port, cts ? TIOCM_CTS : 0); + } + + return ret; +} + +static void max3100_work(struct work_struct *w) +{ + struct max3100_port *s = container_of(w, struct max3100_port, work); + int rxchars; + u16 tx, rx; + int conf, cconf, rts, crts; + struct circ_buf *xmit = &s->port.info->xmit; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + rxchars = 0; + do { + spin_lock(&s->conf_lock); + conf = s->conf; + cconf = s->conf_commit; + s->conf_commit = 0; + rts = s->rts; + crts = s->rts_commit; + s->rts_commit = 0; + spin_unlock(&s->conf_lock); + if (cconf) + max3100_sr(s, MAX3100_WC | conf, &rx); + if (crts) { + max3100_sr(s, MAX3100_WD | MAX3100_TE | + (s->rts ? MAX3100_RTS : 0), &rx); + rxchars += max3100_handlerx(s, rx); + } + + max3100_sr(s, MAX3100_RD, &rx); + rxchars += max3100_handlerx(s, rx); + + if (rx & MAX3100_T) { + tx = 0xffff; + if (s->port.x_char) { + tx = s->port.x_char; + s->port.icount.tx++; + s->port.x_char = 0; + } else if (!uart_circ_empty(xmit) && + !uart_tx_stopped(&s->port)) { + tx = xmit->buf[xmit->tail]; + xmit->tail = (xmit->tail + 1) & + (UART_XMIT_SIZE - 1); + s->port.icount.tx++; + } + if (tx != 0xffff) { + max3100_calc_parity(s, &tx); + tx |= MAX3100_WD | (s->rts ? MAX3100_RTS : 0); + max3100_sr(s, tx, &rx); + rxchars += max3100_handlerx(s, rx); + } + } + + if (rxchars > 16 && s->port.info->port.tty != NULL) { + tty_flip_buffer_push(s->port.info->port.tty); + rxchars = 0; + } + if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS) + uart_write_wakeup(&s->port); + + } while (!s->force_end_work && + !freezing(current) && + ((rx & MAX3100_R) || + (!uart_circ_empty(xmit) && + !uart_tx_stopped(&s->port)))); + + if (rxchars > 0 && s->port.info->port.tty != NULL) + tty_flip_buffer_push(s->port.info->port.tty); +} + +static irqreturn_t max3100_irq(int irqno, void *dev_id) +{ + struct max3100_port *s = dev_id; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + max3100_dowork(s); + return IRQ_HANDLED; +} + +static void max3100_enable_ms(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + if (s->poll_time > 0) + mod_timer(&s->timer, jiffies); + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static void max3100_start_tx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + max3100_dowork(s); +} + +static void max3100_stop_rx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + s->rx_enabled = 0; + spin_lock(&s->conf_lock); + s->conf &= ~MAX3100_RM; + s->conf_commit = 1; + spin_unlock(&s->conf_lock); + max3100_dowork(s); +} + +static unsigned int max3100_tx_empty(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + /* may not be truly up-to-date */ + max3100_dowork(s); + return s->tx_empty; +} + +static unsigned int max3100_get_mctrl(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + /* may not be truly up-to-date */ + max3100_dowork(s); + /* always assert DCD and DSR since these lines are not wired */ + return (s->cts ? TIOCM_CTS : 0) | TIOCM_DSR | TIOCM_CAR; +} + +static void max3100_set_mctrl(struct uart_port *port, unsigned int mctrl) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int rts; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + rts = (mctrl & TIOCM_RTS) > 0; + + spin_lock(&s->conf_lock); + if (s->rts != rts) { + s->rts = rts; + s->rts_commit = 1; + max3100_dowork(s); + } + spin_unlock(&s->conf_lock); +} + +static void +max3100_set_termios(struct uart_port *port, struct ktermios *termios, + struct ktermios *old) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int baud = 0; + unsigned cflag; + u32 param_new, param_mask, parity = 0; + struct tty_struct *tty = s->port.info->port.tty; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + if (!tty) + return; + + cflag = termios->c_cflag; + param_new = 0; + param_mask = 0; + + baud = tty_get_baud_rate(tty); + param_new = s->conf & MAX3100_BAUD; + switch (baud) { + case 300: + if (s->crystal) + baud = s->baud; + else + param_new = 15; + break; + case 600: + param_new = 14 + s->crystal; + break; + case 1200: + param_new = 13 + s->crystal; + break; + case 2400: + param_new = 12 + s->crystal; + break; + case 4800: + param_new = 11 + s->crystal; + break; + case 9600: + param_new = 10 + s->crystal; + break; + case 19200: + param_new = 9 + s->crystal; + break; + case 38400: + param_new = 8 + s->crystal; + break; + case 57600: + param_new = 1 + s->crystal; + break; + case 115200: + param_new = 0 + s->crystal; + break; + case 230400: + if (s->crystal) + param_new = 0; + else + baud = s->baud; + break; + default: + baud = s->baud; + } + tty_encode_baud_rate(tty, baud, baud); + s->baud = baud; + param_mask |= MAX3100_BAUD; + + if ((cflag & CSIZE) == CS8) { + param_new &= ~MAX3100_L; + parity &= ~MAX3100_7BIT; + } else { + param_new |= MAX3100_L; + parity |= MAX3100_7BIT; + cflag = (cflag & ~CSIZE) | CS7; + } + param_mask |= MAX3100_L; + + if (cflag & CSTOPB) + param_new |= MAX3100_ST; + else + param_new &= ~MAX3100_ST; + param_mask |= MAX3100_ST; + + if (cflag & PARENB) { + param_new |= MAX3100_PE; + parity |= MAX3100_PARITY_ON; + } else { + param_new &= ~MAX3100_PE; + parity &= ~MAX3100_PARITY_ON; + } + param_mask |= MAX3100_PE; + + if (cflag & PARODD) + parity |= MAX3100_PARITY_ODD; + else + parity &= ~MAX3100_PARITY_ODD; + + /* mask termios capabilities we don't support */ + cflag &= ~CMSPAR; + termios->c_cflag = cflag; + + s->port.ignore_status_mask = 0; + if (termios->c_iflag & IGNPAR) + s->port.ignore_status_mask |= + MAX3100_STATUS_PE | MAX3100_STATUS_FE | + MAX3100_STATUS_OE; + + /* we are sending char from a workqueue so enable */ + s->port.info->port.tty->low_latency = 1; + + if (s->poll_time > 0) + del_timer_sync(&s->timer); + + uart_update_timeout(port, termios->c_cflag, baud); + + spin_lock(&s->conf_lock); + s->conf = (s->conf & ~param_mask) | (param_new & param_mask); + s->conf_commit = 1; + s->parity = parity; + spin_unlock(&s->conf_lock); + max3100_dowork(s); + + if (UART_ENABLE_MS(&s->port, termios->c_cflag)) + max3100_enable_ms(&s->port); +} + +static void max3100_shutdown(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (s->suspending) + return; + + s->force_end_work = 1; + + if (s->poll_time > 0) + del_timer_sync(&s->timer); + + if (s->workqueue) { + flush_workqueue(s->workqueue); + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + } + if (s->irq) + free_irq(s->irq, s); + + /* set shutdown mode to save power */ + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(1); + else { + u16 tx, rx; + + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(s, tx, &rx); + } +} + +static int max3100_startup(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + char b[12]; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + s->conf = MAX3100_RM; + s->baud = s->crystal ? 230400 : 115200; + s->rx_enabled = 1; + + if (s->suspending) + return 0; + + s->force_end_work = 0; + s->parity = 0; + s->rts = 0; + + sprintf(b, "max3100-%d", s->minor); + s->workqueue = create_freezeable_workqueue(b); + if (!s->workqueue) { + dev_warn(&s->spi->dev, "cannot create workqueue\n"); + return -EBUSY; + } + INIT_WORK(&s->work, max3100_work); + + if (request_irq(s->irq, max3100_irq, + IRQF_TRIGGER_FALLING, "max3100", s) < 0) { + dev_warn(&s->spi->dev, "cannot allocate irq %d\n", s->irq); + s->irq = 0; + destroy_workqueue(s->workqueue); + s->workqueue = NULL; + return -EBUSY; + } + + if (s->loopback) { + u16 tx, rx; + tx = 0x4001; + max3100_sr(s, tx, &rx); + } + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(0); + s->conf_commit = 1; + max3100_dowork(s); + /* wait for clock to settle */ + msleep(50); + + max3100_enable_ms(&s->port); + + return 0; +} + +static const char *max3100_type(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + return s->port.type == PORT_MAX3100 ? "MAX3100" : NULL; +} + +static void max3100_release_port(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static void max3100_config_port(struct uart_port *port, int flags) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (flags & UART_CONFIG_TYPE) + s->port.type = PORT_MAX3100; +} + +static int max3100_verify_port(struct uart_port *port, + struct serial_struct *ser) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + int ret = -EINVAL; + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (ser->type == PORT_UNKNOWN || ser->type == PORT_MAX3100) + ret = 0; + return ret; +} + +static void max3100_stop_tx(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static int max3100_request_port(struct uart_port *port) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + return 0; +} + +static void max3100_break_ctl(struct uart_port *port, int break_state) +{ + struct max3100_port *s = container_of(port, + struct max3100_port, + port); + + dev_dbg(&s->spi->dev, "%s\n", __func__); +} + +static struct uart_ops max3100_ops = { + .tx_empty = max3100_tx_empty, + .set_mctrl = max3100_set_mctrl, + .get_mctrl = max3100_get_mctrl, + .stop_tx = max3100_stop_tx, + .start_tx = max3100_start_tx, + .stop_rx = max3100_stop_rx, + .enable_ms = max3100_enable_ms, + .break_ctl = max3100_break_ctl, + .startup = max3100_startup, + .shutdown = max3100_shutdown, + .set_termios = max3100_set_termios, + .type = max3100_type, + .release_port = max3100_release_port, + .request_port = max3100_request_port, + .config_port = max3100_config_port, + .verify_port = max3100_verify_port, +}; + +static struct uart_driver max3100_uart_driver = { + .owner = THIS_MODULE, + .driver_name = "ttyMAX", + .dev_name = "ttyMAX", + .major = MAX3100_MAJOR, + .minor = MAX3100_MINOR, + .nr = MAX_MAX3100, +}; +static int uart_driver_registered; + +static int __devinit max3100_probe(struct spi_device *spi) +{ + int i, retval; + struct plat_max3100 *pdata; + u16 tx, rx; + + mutex_lock(&max3100s_lock); + + if (!uart_driver_registered) { + uart_driver_registered = 1; + retval = uart_register_driver(&max3100_uart_driver); + if (retval) { + printk(KERN_ERR "Couldn't register max3100 uart driver\n"); + mutex_unlock(&max3100s_lock); + return retval; + } + } + + for (i = 0; i < MAX_MAX3100; i++) + if (!max3100s[i]) + break; + if (i == MAX_MAX3100) { + dev_warn(&spi->dev, "too many MAX3100 chips\n"); + mutex_unlock(&max3100s_lock); + return -ENOMEM; + } + + max3100s[i] = kzalloc(sizeof(struct max3100_port), GFP_KERNEL); + if (!max3100s[i]) { + dev_warn(&spi->dev, + "kmalloc for max3100 structure %d failed!\n", i); + mutex_unlock(&max3100s_lock); + return -ENOMEM; + } + max3100s[i]->spi = spi; + max3100s[i]->irq = spi->irq; + spin_lock_init(&max3100s[i]->conf_lock); + dev_set_drvdata(&spi->dev, max3100s[i]); + pdata = spi->dev.platform_data; + max3100s[i]->crystal = pdata->crystal; + max3100s[i]->loopback = pdata->loopback; + max3100s[i]->poll_time = pdata->poll_time * HZ / 1000; + if (pdata->poll_time > 0 && max3100s[i]->poll_time == 0) + max3100s[i]->poll_time = 1; + max3100s[i]->max3100_hw_suspend = pdata->max3100_hw_suspend; + max3100s[i]->minor = i; + init_timer(&max3100s[i]->timer); + max3100s[i]->timer.function = max3100_timeout; + max3100s[i]->timer.data = (unsigned long) max3100s[i]; + + dev_dbg(&spi->dev, "%s: adding port %d\n", __func__, i); + max3100s[i]->port.irq = max3100s[i]->irq; + max3100s[i]->port.uartclk = max3100s[i]->crystal ? 3686400 : 1843200; + max3100s[i]->port.fifosize = 16; + max3100s[i]->port.ops = &max3100_ops; + max3100s[i]->port.flags = UPF_SKIP_TEST | UPF_BOOT_AUTOCONF; + max3100s[i]->port.line = i; + max3100s[i]->port.type = PORT_MAX3100; + max3100s[i]->port.dev = &spi->dev; + retval = uart_add_one_port(&max3100_uart_driver, &max3100s[i]->port); + if (retval < 0) + dev_warn(&spi->dev, + "uart_add_one_port failed for line %d with error %d\n", + i, retval); + + /* set shutdown mode to save power. Will be woken-up on open */ + if (max3100s[i]->max3100_hw_suspend) + max3100s[i]->max3100_hw_suspend(1); + else { + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(max3100s[i], tx, &rx); + } + mutex_unlock(&max3100s_lock); + return 0; +} + +static int __devexit max3100_remove(struct spi_device *spi) +{ + struct max3100_port *s = dev_get_drvdata(&spi->dev); + int i; + + mutex_lock(&max3100s_lock); + + /* find out the index for the chip we are removing */ + for (i = 0; i < MAX_MAX3100; i++) + if (max3100s[i] == s) + break; + + dev_dbg(&spi->dev, "%s: removing port %d\n", __func__, i); + uart_remove_one_port(&max3100_uart_driver, &max3100s[i]->port); + kfree(max3100s[i]); + max3100s[i] = NULL; + + /* check if this is the last chip we have */ + for (i = 0; i < MAX_MAX3100; i++) + if (max3100s[i]) { + mutex_unlock(&max3100s_lock); + return 0; + } + pr_debug("removing max3100 driver\n"); + uart_unregister_driver(&max3100_uart_driver); + + mutex_unlock(&max3100s_lock); + return 0; +} + +#ifdef CONFIG_PM + +static int max3100_suspend(struct spi_device *spi, pm_message_t state) +{ + struct max3100_port *s = dev_get_drvdata(&spi->dev); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + disable_irq(s->irq); + + s->suspending = 1; + uart_suspend_port(&max3100_uart_driver, &s->port); + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(1); + else { + /* no HW suspend, so do SW one */ + u16 tx, rx; + + tx = MAX3100_WC | MAX3100_SHDN; + max3100_sr(s, tx, &rx); + } + return 0; +} + +static int max3100_resume(struct spi_device *spi) +{ + struct max3100_port *s = dev_get_drvdata(&spi->dev); + + dev_dbg(&s->spi->dev, "%s\n", __func__); + + if (s->max3100_hw_suspend) + s->max3100_hw_suspend(0); + uart_resume_port(&max3100_uart_driver, &s->port); + s->suspending = 0; + + enable_irq(s->irq); + + s->conf_commit = 1; + if (s->workqueue) + max3100_dowork(s); + + return 0; +} + +#else +#define max3100_suspend NULL +#define max3100_resume NULL +#endif + +static struct spi_driver max3100_driver = { + .driver = { + .name = "max3100", + .bus = &spi_bus_type, + .owner = THIS_MODULE, + }, + + .probe = max3100_probe, + .remove = __devexit_p(max3100_remove), + .suspend = max3100_suspend, + .resume = max3100_resume, +}; + +static int __init max3100_init(void) +{ + return spi_register_driver(&max3100_driver); +} +module_init(max3100_init); + +static void __exit max3100_exit(void) +{ + spi_unregister_driver(&max3100_driver); +} +module_exit(max3100_exit); + +MODULE_DESCRIPTION("MAX3100 driver"); +MODULE_AUTHOR("Christian Pellegrin <chripell@evolware.org>"); +MODULE_LICENSE("GPL"); diff --git a/drivers/serial/sunsu.c b/drivers/serial/sunsu.c index a4dc79b1d7a..47c6837850b 100644 --- a/drivers/serial/sunsu.c +++ b/drivers/serial/sunsu.c @@ -1178,7 +1178,7 @@ static struct uart_driver sunsu_reg = { .major = TTY_MAJOR, }; -static int __init sunsu_kbd_ms_init(struct uart_sunsu_port *up) +static int __devinit sunsu_kbd_ms_init(struct uart_sunsu_port *up) { int quot, baud; #ifdef CONFIG_SERIO diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index 4ed228a8994..bb5e6f67157 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -280,7 +280,7 @@ static int ohci_hcd_at91_drv_probe(struct platform_device *pdev) * are always powered while this driver is active, and use * active-low power switches. */ - for (i = 0; i < pdata->ports; i++) { + for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { if (pdata->vbus_pin[i] <= 0) continue; gpio_request(pdata->vbus_pin[i], "ohci_vbus"); @@ -298,7 +298,7 @@ static int ohci_hcd_at91_drv_remove(struct platform_device *pdev) int i; if (pdata) { - for (i = 0; i < pdata->ports; i++) { + for (i = 0; i < ARRAY_SIZE(pdata->vbus_pin); i++) { if (pdata->vbus_pin[i] <= 0) continue; gpio_direction_output(pdata->vbus_pin[i], 1); diff --git a/fs/befs/super.c b/fs/befs/super.c index 41f2b4d0093..ca40f828f64 100644 --- a/fs/befs/super.c +++ b/fs/befs/super.c @@ -8,6 +8,7 @@ */ #include <linux/fs.h> +#include <asm/page.h> /* for PAGE_SIZE */ #include "befs.h" #include "super.h" diff --git a/fs/buffer.c b/fs/buffer.c index 6e35762b616..13edf7ad3ff 100644 --- a/fs/buffer.c +++ b/fs/buffer.c @@ -1596,6 +1596,16 @@ EXPORT_SYMBOL(unmap_underlying_metadata); * locked buffer. This only can happen if someone has written the buffer * directly, with submit_bh(). At the address_space level PageWriteback * prevents this contention from occurring. + * + * If block_write_full_page() is called with wbc->sync_mode == + * WB_SYNC_ALL, the writes are posted using WRITE_SYNC_PLUG; this + * causes the writes to be flagged as synchronous writes, but the + * block device queue will NOT be unplugged, since usually many pages + * will be pushed to the out before the higher-level caller actually + * waits for the writes to be completed. The various wait functions, + * such as wait_on_writeback_range() will ultimately call sync_page() + * which will ultimately call blk_run_backing_dev(), which will end up + * unplugging the device queue. */ static int __block_write_full_page(struct inode *inode, struct page *page, get_block_t *get_block, struct writeback_control *wbc) @@ -1606,7 +1616,8 @@ static int __block_write_full_page(struct inode *inode, struct page *page, struct buffer_head *bh, *head; const unsigned blocksize = 1 << inode->i_blkbits; int nr_underway = 0; - int write_op = (wbc->sync_mode == WB_SYNC_ALL ? WRITE_SYNC : WRITE); + int write_op = (wbc->sync_mode == WB_SYNC_ALL ? + WRITE_SYNC_PLUG : WRITE); BUG_ON(!PageLocked(page)); diff --git a/fs/ext3/inode.c b/fs/ext3/inode.c index 466a332e0bd..fcfa2436185 100644 --- a/fs/ext3/inode.c +++ b/fs/ext3/inode.c @@ -1521,12 +1521,16 @@ static int ext3_ordered_writepage(struct page *page, if (!page_has_buffers(page)) { create_empty_buffers(page, inode->i_sb->s_blocksize, (1 << BH_Dirty)|(1 << BH_Uptodate)); - } else if (!walk_page_buffers(NULL, page_buffers(page), 0, PAGE_CACHE_SIZE, NULL, buffer_unmapped)) { - /* Provide NULL instead of get_block so that we catch bugs if buffers weren't really mapped */ - return block_write_full_page(page, NULL, wbc); + page_bufs = page_buffers(page); + } else { + page_bufs = page_buffers(page); + if (!walk_page_buffers(NULL, page_bufs, 0, PAGE_CACHE_SIZE, + NULL, buffer_unmapped)) { + /* Provide NULL get_block() to catch bugs if buffers + * weren't really mapped */ + return block_write_full_page(page, NULL, wbc); + } } - page_bufs = page_buffers(page); - handle = ext3_journal_start(inode, ext3_writepage_trans_blocks(inode)); if (IS_ERR(handle)) { @@ -1581,6 +1585,15 @@ static int ext3_writeback_writepage(struct page *page, if (ext3_journal_current_handle()) goto out_fail; + if (page_has_buffers(page)) { + if (!walk_page_buffers(NULL, page_buffers(page), 0, + PAGE_CACHE_SIZE, NULL, buffer_unmapped)) { + /* Provide NULL get_block() to catch bugs if buffers + * weren't really mapped */ + return block_write_full_page(page, NULL, wbc); + } + } + handle = ext3_journal_start(inode, ext3_writepage_trans_blocks(inode)); if (IS_ERR(handle)) { ret = PTR_ERR(handle); diff --git a/fs/proc/task_nommu.c b/fs/proc/task_nommu.c index 12c20377772..64a72e2e765 100644 --- a/fs/proc/task_nommu.c +++ b/fs/proc/task_nommu.c @@ -135,7 +135,7 @@ static int nommu_vma_show(struct seq_file *m, struct vm_area_struct *vma) struct inode *inode = vma->vm_file->f_path.dentry->d_inode; dev = inode->i_sb->s_dev; ino = inode->i_ino; - pgoff = (loff_t)vma->pg_off << PAGE_SHIFT; + pgoff = (loff_t)vma->vm_pgoff << PAGE_SHIFT; } seq_printf(m, diff --git a/include/acpi/acpi_bus.h b/include/acpi/acpi_bus.h index a2228511d4b..c34b1102290 100644 --- a/include/acpi/acpi_bus.h +++ b/include/acpi/acpi_bus.h @@ -270,7 +270,6 @@ struct acpi_device { struct list_head children; struct list_head node; struct list_head wakeup_list; - struct list_head g_list; struct acpi_device_status status; struct acpi_device_flags flags; struct acpi_device_pnp pnp; diff --git a/include/linux/serial_max3100.h b/include/linux/serial_max3100.h new file mode 100644 index 00000000000..4976befb6ae --- /dev/null +++ b/include/linux/serial_max3100.h @@ -0,0 +1,52 @@ +/* + * + * Copyright (C) 2007 Christian Pellegrin + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + */ + + +#ifndef _LINUX_SERIAL_MAX3100_H +#define _LINUX_SERIAL_MAX3100_H 1 + + +/** + * struct plat_max3100 - MAX3100 SPI UART platform data + * @loopback: force MAX3100 in loopback + * @crystal: 1 for 3.6864 Mhz, 0 for 1.8432 + * @max3100_hw_suspend: MAX3100 has a shutdown pin. This is a hook + * called on suspend and resume to activate it. + * @poll_time: poll time for CTS signal in ms, 0 disables (so no hw + * flow ctrl is possible but you have less CPU usage) + * + * You should use this structure in your machine description to specify + * how the MAX3100 is connected. Example: + * + * static struct plat_max3100 max3100_plat_data = { + * .loopback = 0, + * .crystal = 0, + * .poll_time = 100, + * }; + * + * static struct spi_board_info spi_board_info[] = { + * { + * .modalias = "max3100", + * .platform_data = &max3100_plat_data, + * .irq = IRQ_EINT12, + * .max_speed_hz = 5*1000*1000, + * .chip_select = 0, + * }, + * }; + * + **/ +struct plat_max3100 { + int loopback; + int crystal; + void (*max3100_hw_suspend) (int suspend); + int poll_time; +}; + +#endif diff --git a/kernel/ptrace.c b/kernel/ptrace.c index aaad0ec3419..64191fa09b7 100644 --- a/kernel/ptrace.c +++ b/kernel/ptrace.c @@ -21,9 +21,7 @@ #include <linux/audit.h> #include <linux/pid_namespace.h> #include <linux/syscalls.h> - -#include <asm/pgtable.h> -#include <asm/uaccess.h> +#include <linux/uaccess.h> /* @@ -48,7 +46,7 @@ void __ptrace_link(struct task_struct *child, struct task_struct *new_parent) list_add(&child->ptrace_entry, &new_parent->ptraced); child->parent = new_parent; } - + /* * Turn a tracing stop into a normal stop now, since with no tracer there * would be no way to wake it up with SIGCONT or SIGKILL. If there was a @@ -173,7 +171,7 @@ bool ptrace_may_access(struct task_struct *task, unsigned int mode) task_lock(task); err = __ptrace_may_access(task, mode); task_unlock(task); - return (!err ? true : false); + return !err; } int ptrace_attach(struct task_struct *task) @@ -358,7 +356,7 @@ int ptrace_readdata(struct task_struct *tsk, unsigned long src, char __user *dst copied += retval; src += retval; dst += retval; - len -= retval; + len -= retval; } return copied; } @@ -383,7 +381,7 @@ int ptrace_writedata(struct task_struct *tsk, char __user *src, unsigned long ds copied += retval; src += retval; dst += retval; - len -= retval; + len -= retval; } return copied; } @@ -496,9 +494,9 @@ static int ptrace_resume(struct task_struct *child, long request, long data) if (unlikely(!arch_has_single_step())) return -EIO; user_enable_single_step(child); - } - else + } else { user_disable_single_step(child); + } child->exit_code = data; wake_up_process(child); diff --git a/sound/sparc/cs4231.c b/sound/sparc/cs4231.c index 7d93fa705cc..8d13d933087 100644 --- a/sound/sparc/cs4231.c +++ b/sound/sparc/cs4231.c @@ -703,7 +703,7 @@ static int snd_cs4231_timer_stop(struct snd_timer *timer) return 0; } -static void __init snd_cs4231_init(struct snd_cs4231 *chip) +static void __devinit snd_cs4231_init(struct snd_cs4231 *chip) { unsigned long flags; @@ -1020,7 +1020,7 @@ static snd_pcm_uframes_t snd_cs4231_capture_pointer( return bytes_to_frames(substream->runtime, ptr); } -static int __init snd_cs4231_probe(struct snd_cs4231 *chip) +static int __devinit snd_cs4231_probe(struct snd_cs4231 *chip) { unsigned long flags; int i; @@ -1219,7 +1219,7 @@ static struct snd_pcm_ops snd_cs4231_capture_ops = { .pointer = snd_cs4231_capture_pointer, }; -static int __init snd_cs4231_pcm(struct snd_card *card) +static int __devinit snd_cs4231_pcm(struct snd_card *card) { struct snd_cs4231 *chip = card->private_data; struct snd_pcm *pcm; @@ -1248,7 +1248,7 @@ static int __init snd_cs4231_pcm(struct snd_card *card) return 0; } -static int __init snd_cs4231_timer(struct snd_card *card) +static int __devinit snd_cs4231_timer(struct snd_card *card) { struct snd_cs4231 *chip = card->private_data; struct snd_timer *timer; @@ -1499,7 +1499,7 @@ static int snd_cs4231_put_double(struct snd_kcontrol *kcontrol, .private_value = (left_reg) | ((right_reg) << 8) | ((shift_left) << 16) | \ ((shift_right) << 19) | ((mask) << 24) | ((invert) << 22) } -static struct snd_kcontrol_new snd_cs4231_controls[] __initdata = { +static struct snd_kcontrol_new snd_cs4231_controls[] __devinitdata = { CS4231_DOUBLE("PCM Playback Switch", 0, CS4231_LEFT_OUTPUT, CS4231_RIGHT_OUTPUT, 7, 7, 1, 1), CS4231_DOUBLE("PCM Playback Volume", 0, CS4231_LEFT_OUTPUT, @@ -1538,7 +1538,7 @@ CS4231_SINGLE("Line Out Switch", 0, CS4231_PIN_CTRL, 6, 1, 1), CS4231_SINGLE("Headphone Out Switch", 0, CS4231_PIN_CTRL, 7, 1, 1) }; -static int __init snd_cs4231_mixer(struct snd_card *card) +static int __devinit snd_cs4231_mixer(struct snd_card *card) { struct snd_cs4231 *chip = card->private_data; int err, idx; @@ -1559,7 +1559,7 @@ static int __init snd_cs4231_mixer(struct snd_card *card) static int dev; -static int __init cs4231_attach_begin(struct snd_card **rcard) +static int __devinit cs4231_attach_begin(struct snd_card **rcard) { struct snd_card *card; struct snd_cs4231 *chip; @@ -1590,7 +1590,7 @@ static int __init cs4231_attach_begin(struct snd_card **rcard) return 0; } -static int __init cs4231_attach_finish(struct snd_card *card) +static int __devinit cs4231_attach_finish(struct snd_card *card) { struct snd_cs4231 *chip = card->private_data; int err; @@ -1794,9 +1794,9 @@ static struct snd_device_ops snd_cs4231_sbus_dev_ops = { .dev_free = snd_cs4231_sbus_dev_free, }; -static int __init snd_cs4231_sbus_create(struct snd_card *card, - struct of_device *op, - int dev) +static int __devinit snd_cs4231_sbus_create(struct snd_card *card, + struct of_device *op, + int dev) { struct snd_cs4231 *chip = card->private_data; int err; @@ -1960,9 +1960,9 @@ static struct snd_device_ops snd_cs4231_ebus_dev_ops = { .dev_free = snd_cs4231_ebus_dev_free, }; -static int __init snd_cs4231_ebus_create(struct snd_card *card, - struct of_device *op, - int dev) +static int __devinit snd_cs4231_ebus_create(struct snd_card *card, + struct of_device *op, + int dev) { struct snd_cs4231 *chip = card->private_data; int err; |