diff options
| -rw-r--r-- | Documentation/i2c/summary | 45 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-davinci.c | 4 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-gpio.c | 1 | ||||
| -rw-r--r-- | drivers/i2c/busses/i2c-omap.c | 6 | ||||
| -rw-r--r-- | drivers/i2c/chips/isp1301_omap.c | 2 | ||||
| -rw-r--r-- | drivers/media/video/videobuf-core.c | 14 |
6 files changed, 24 insertions, 48 deletions
diff --git a/Documentation/i2c/summary b/Documentation/i2c/summary index 003c7319b8c..13ab076dcd9 100644 --- a/Documentation/i2c/summary +++ b/Documentation/i2c/summary @@ -1,5 +1,3 @@ -This is an explanation of what i2c is, and what is supported in this package. - I2C and SMBus ============= @@ -33,52 +31,17 @@ When we talk about I2C, we use the following terms: Client An Algorithm driver contains general code that can be used for a whole class -of I2C adapters. Each specific adapter driver depends on one algorithm -driver. +of I2C adapters. Each specific adapter driver either depends on one algorithm +driver, or includes its own implementation. A Driver driver (yes, this sounds ridiculous, sorry) contains the general code to access some type of device. Each detected device gets its own data in the Client structure. Usually, Driver and Client are more closely integrated than Algorithm and Adapter. -For a given configuration, you will need a driver for your I2C bus (usually -a separate Adapter and Algorithm driver), and drivers for your I2C devices -(usually one driver for each device). There are no I2C device drivers -in this package. See the lm_sensors project http://www.lm-sensors.nu -for device drivers. +For a given configuration, you will need a driver for your I2C bus, and +drivers for your I2C devices (usually one driver for each device). At this time, Linux only operates I2C (or SMBus) in master mode; you can't use these APIs to make a Linux system behave as a slave/device, either to speak a custom protocol or to emulate some other device. - - -Included Bus Drivers -==================== -Note that only stable drivers are patched into the kernel by 'mkpatch'. - - -Base modules ------------- - -i2c-core: The basic I2C code, including the /proc/bus/i2c* interface -i2c-dev: The /dev/i2c-* interface -i2c-proc: The /proc/sys/dev/sensors interface for device (client) drivers - -Algorithm drivers ------------------ - -i2c-algo-bit: A bit-banging algorithm -i2c-algo-pcf: A PCF 8584 style algorithm -i2c-algo-ibm_ocp: An algorithm for the I2C device in IBM 4xx processors (NOT BUILT BY DEFAULT) - -Adapter drivers ---------------- - -i2c-elektor: Elektor ISA card (uses i2c-algo-pcf) -i2c-elv: ELV parallel port adapter (uses i2c-algo-bit) -i2c-pcf-epp: PCF8584 on a EPP parallel port (uses i2c-algo-pcf) (NOT mkpatched) -i2c-philips-par: Philips style parallel port adapter (uses i2c-algo-bit) -i2c-adap-ibm_ocp: IBM 4xx processor I2C device (uses i2c-algo-ibm_ocp) (NOT BUILT BY DEFAULT) -i2c-pport: Primitive parallel port adapter (uses i2c-algo-bit) -i2c-velleman: Velleman K8000 parallel port adapter (uses i2c-algo-bit) - diff --git a/drivers/i2c/busses/i2c-davinci.c b/drivers/i2c/busses/i2c-davinci.c index bd7aaff3524..67679882ebe 100644 --- a/drivers/i2c/busses/i2c-davinci.c +++ b/drivers/i2c/busses/i2c-davinci.c @@ -404,7 +404,7 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) DAVINCI_I2C_STR_REG, w); } else - dev_err(dev->dev, "RDR IRQ while no" + dev_err(dev->dev, "RDR IRQ while no " "data requested\n"); break; @@ -423,7 +423,7 @@ static irqreturn_t i2c_davinci_isr(int this_irq, void *dev_id) DAVINCI_I2C_IMR_REG, w); } else - dev_err(dev->dev, "TDR IRQ while no data to" + dev_err(dev->dev, "TDR IRQ while no data to " "send\n"); break; diff --git a/drivers/i2c/busses/i2c-gpio.c b/drivers/i2c/busses/i2c-gpio.c index 44e1cd21bb0..3ca19fc234f 100644 --- a/drivers/i2c/busses/i2c-gpio.c +++ b/drivers/i2c/busses/i2c-gpio.c @@ -140,6 +140,7 @@ static int __init i2c_gpio_probe(struct platform_device *pdev) adap->owner = THIS_MODULE; snprintf(adap->name, sizeof(adap->name), "i2c-gpio%d", pdev->id); adap->algo_data = bit_data; + adap->class = I2C_CLASS_HWMON; adap->dev.parent = &pdev->dev; /* diff --git a/drivers/i2c/busses/i2c-omap.c b/drivers/i2c/busses/i2c-omap.c index 89a30028ddb..cb55cf2ba1e 100644 --- a/drivers/i2c/busses/i2c-omap.c +++ b/drivers/i2c/busses/i2c-omap.c @@ -203,7 +203,7 @@ static int omap_i2c_init(struct omap_i2c_dev *dev) while (!(omap_i2c_read_reg(dev, OMAP_I2C_SYSS_REG) & OMAP_I2C_SYSS_RDONE)) { if (time_after(jiffies, timeout)) { - dev_warn(dev->dev, "timeout waiting" + dev_warn(dev->dev, "timeout waiting " "for controller reset\n"); return -ETIMEDOUT; } @@ -483,7 +483,7 @@ omap_i2c_isr(int this_irq, void *dev_id) dev->buf_len--; } } else - dev_err(dev->dev, "RRDY IRQ while no data" + dev_err(dev->dev, "RRDY IRQ while no data " "requested\n"); omap_i2c_ack_stat(dev, OMAP_I2C_STAT_RRDY); continue; @@ -498,7 +498,7 @@ omap_i2c_isr(int this_irq, void *dev_id) dev->buf_len--; } } else - dev_err(dev->dev, "XRDY IRQ while no" + dev_err(dev->dev, "XRDY IRQ while no " "data to send\n"); omap_i2c_write_reg(dev, OMAP_I2C_DATA_REG, w); omap_i2c_ack_stat(dev, OMAP_I2C_STAT_XRDY); diff --git a/drivers/i2c/chips/isp1301_omap.c b/drivers/i2c/chips/isp1301_omap.c index fe04e46991a..b767603a07b 100644 --- a/drivers/i2c/chips/isp1301_omap.c +++ b/drivers/i2c/chips/isp1301_omap.c @@ -26,7 +26,7 @@ #include <linux/interrupt.h> #include <linux/platform_device.h> #include <linux/usb/ch9.h> -#include <linux/usb_gadget.h> +#include <linux/usb/gadget.h> #include <linux/usb.h> #include <linux/usb/otg.h> #include <linux/i2c.h> diff --git a/drivers/media/video/videobuf-core.c b/drivers/media/video/videobuf-core.c index de2f56b1916..81f77d2b4bd 100644 --- a/drivers/media/video/videobuf-core.c +++ b/drivers/media/video/videobuf-core.c @@ -806,7 +806,7 @@ ssize_t videobuf_read_one(struct videobuf_queue *q, } /* Locking: Caller holds q->lock */ -int videobuf_read_start(struct videobuf_queue *q) +int __videobuf_read_start(struct videobuf_queue *q) { enum v4l2_field field; unsigned long flags=0; @@ -862,6 +862,17 @@ static void __videobuf_read_stop(struct videobuf_queue *q) } +int videobuf_read_start(struct videobuf_queue *q) +{ + int rc; + + mutex_lock(&q->lock); + rc = __videobuf_read_start(q); + mutex_unlock(&q->lock); + + return rc; +} + void videobuf_read_stop(struct videobuf_queue *q) { mutex_lock(&q->lock); @@ -1058,6 +1069,7 @@ EXPORT_SYMBOL_GPL(videobuf_dqbuf); EXPORT_SYMBOL_GPL(videobuf_streamon); EXPORT_SYMBOL_GPL(videobuf_streamoff); +EXPORT_SYMBOL_GPL(videobuf_read_start); EXPORT_SYMBOL_GPL(videobuf_read_stop); EXPORT_SYMBOL_GPL(videobuf_stop); EXPORT_SYMBOL_GPL(videobuf_read_stream); |