aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/block/ub.c20
-rw-r--r--drivers/isdn/hisax/st5481_usb.c9
-rw-r--r--drivers/media/video/pvrusb2/pvrusb2-hdw.c1
-rw-r--r--drivers/usb/class/cdc-wdm.c2
-rw-r--r--drivers/usb/core/devio.c2
-rw-r--r--drivers/usb/core/hcd.c26
-rw-r--r--drivers/usb/core/hcd.h14
-rw-r--r--drivers/usb/core/message.c58
-rw-r--r--drivers/usb/core/usb.c2
-rw-r--r--drivers/usb/gadget/u_ether.c8
-rw-r--r--drivers/usb/host/whci/asl.c15
-rw-r--r--drivers/usb/host/whci/hcd.c23
-rw-r--r--drivers/usb/host/whci/pzl.c16
-rw-r--r--drivers/usb/host/whci/qset.c24
-rw-r--r--drivers/usb/host/whci/whcd.h1
-rw-r--r--drivers/usb/host/whci/whci-hc.h1
-rw-r--r--drivers/usb/musb/cppi_dma.c23
-rw-r--r--drivers/usb/musb/musb_core.c12
-rw-r--r--drivers/usb/musb/musb_gadget.c33
-rw-r--r--drivers/usb/musb/musb_host.c406
-rw-r--r--drivers/usb/musb/musbhsdma.c66
-rw-r--r--drivers/usb/serial/ftdi_sio.c1
-rw-r--r--drivers/usb/serial/ftdi_sio.h7
-rw-r--r--drivers/usb/serial/moto_modem.c1
-rw-r--r--drivers/usb/serial/option.c5
-rw-r--r--drivers/usb/serial/qcserial.c21
-rw-r--r--drivers/usb/storage/Makefile3
-rw-r--r--drivers/usb/storage/transport.c4
-rw-r--r--drivers/usb/storage/unusual_devs.h14
-rw-r--r--drivers/usb/wusbcore/devconnect.c21
-rw-r--r--drivers/usb/wusbcore/wusbhc.c32
-rw-r--r--include/linux/usb.h9
32 files changed, 532 insertions, 348 deletions
diff --git a/drivers/block/ub.c b/drivers/block/ub.c
index 69b7f8e7759..689cd27ac89 100644
--- a/drivers/block/ub.c
+++ b/drivers/block/ub.c
@@ -1025,6 +1025,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
{
struct urb *urb = &sc->work_urb;
struct bulk_cs_wrap *bcs;
+ int endp;
int len;
int rc;
@@ -1033,6 +1034,10 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
return;
}
+ endp = usb_pipeendpoint(sc->last_pipe);
+ if (usb_pipein(sc->last_pipe))
+ endp |= USB_DIR_IN;
+
if (cmd->state == UB_CMDST_CLEAR) {
if (urb->status == -EPIPE) {
/*
@@ -1048,9 +1053,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
* We ignore the result for the halt clear.
*/
- /* reset the endpoint toggle */
- usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
- usb_pipeout(sc->last_pipe), 0);
+ usb_reset_endpoint(sc->dev, endp);
ub_state_sense(sc, cmd);
@@ -1065,9 +1068,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
* We ignore the result for the halt clear.
*/
- /* reset the endpoint toggle */
- usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
- usb_pipeout(sc->last_pipe), 0);
+ usb_reset_endpoint(sc->dev, endp);
ub_state_stat(sc, cmd);
@@ -1082,9 +1083,7 @@ static void ub_scsi_urb_compl(struct ub_dev *sc, struct ub_scsi_cmd *cmd)
* We ignore the result for the halt clear.
*/
- /* reset the endpoint toggle */
- usb_settoggle(sc->dev, usb_pipeendpoint(sc->last_pipe),
- usb_pipeout(sc->last_pipe), 0);
+ usb_reset_endpoint(sc->dev, endp);
ub_state_stat_counted(sc, cmd);
@@ -2119,8 +2118,7 @@ static int ub_probe_clear_stall(struct ub_dev *sc, int stalled_pipe)
del_timer_sync(&timer);
usb_kill_urb(&sc->work_urb);
- /* reset the endpoint toggle */
- usb_settoggle(sc->dev, endp, usb_pipeout(sc->last_pipe), 0);
+ usb_reset_endpoint(sc->dev, endp);
return 0;
}
diff --git a/drivers/isdn/hisax/st5481_usb.c b/drivers/isdn/hisax/st5481_usb.c
index ec3c0e50766..2b3a055059e 100644
--- a/drivers/isdn/hisax/st5481_usb.c
+++ b/drivers/isdn/hisax/st5481_usb.c
@@ -149,14 +149,7 @@ static void usb_ctrl_complete(struct urb *urb)
if (ctrl_msg->dr.bRequest == USB_REQ_CLEAR_FEATURE) {
/* Special case handling for pipe reset */
le16_to_cpus(&ctrl_msg->dr.wIndex);
-
- /* toggle is reset on clear */
- usb_settoggle(adapter->usb_dev,
- ctrl_msg->dr.wIndex & ~USB_DIR_IN,
- (ctrl_msg->dr.wIndex & USB_DIR_IN) == 0,
- 0);
-
-
+ usb_reset_endpoint(adapter->usb_dev, ctrl_msg->dr.wIndex);
}
if (ctrl_msg->complete)
diff --git a/drivers/media/video/pvrusb2/pvrusb2-hdw.c b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
index d9d974a8f52..add3395d324 100644
--- a/drivers/media/video/pvrusb2/pvrusb2-hdw.c
+++ b/drivers/media/video/pvrusb2/pvrusb2-hdw.c
@@ -1461,7 +1461,6 @@ static int pvr2_upload_firmware1(struct pvr2_hdw *hdw)
return ret;
}
- usb_settoggle(hdw->usb_dev, 0 & 0xf, !(0 & USB_DIR_IN), 0);
usb_clear_halt(hdw->usb_dev, usb_sndbulkpipe(hdw->usb_dev, 0 & 0x7f));
pipe = usb_sndctrlpipe(hdw->usb_dev, 0);
diff --git a/drivers/usb/class/cdc-wdm.c b/drivers/usb/class/cdc-wdm.c
index 3771d6e6d0c..34e6108e1d4 100644
--- a/drivers/usb/class/cdc-wdm.c
+++ b/drivers/usb/class/cdc-wdm.c
@@ -652,7 +652,7 @@ next_desc:
iface = &intf->altsetting[0];
ep = &iface->endpoint[0].desc;
- if (!usb_endpoint_is_int_in(ep)) {
+ if (!ep || !usb_endpoint_is_int_in(ep)) {
rv = -EINVAL;
goto err;
}
diff --git a/drivers/usb/core/devio.c b/drivers/usb/core/devio.c
index df3c539f652..308609039c7 100644
--- a/drivers/usb/core/devio.c
+++ b/drivers/usb/core/devio.c
@@ -841,7 +841,7 @@ static int proc_resetep(struct dev_state *ps, void __user *arg)
ret = checkintf(ps, ret);
if (ret)
return ret;
- usb_settoggle(ps->dev, ep & 0xf, !(ep & USB_DIR_IN), 0);
+ usb_reset_endpoint(ps->dev, ep);
return 0;
}
diff --git a/drivers/usb/core/hcd.c b/drivers/usb/core/hcd.c
index 81fa8506825..42b93da1085 100644
--- a/drivers/usb/core/hcd.c
+++ b/drivers/usb/core/hcd.c
@@ -1539,6 +1539,32 @@ void usb_hcd_disable_endpoint(struct usb_device *udev,
hcd->driver->endpoint_disable(hcd, ep);
}
+/**
+ * usb_hcd_reset_endpoint - reset host endpoint state
+ * @udev: USB device.
+ * @ep: the endpoint to reset.
+ *
+ * Resets any host endpoint state such as the toggle bit, sequence
+ * number and current window.
+ */
+void usb_hcd_reset_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep)
+{
+ struct usb_hcd *hcd = bus_to_hcd(udev->bus);
+
+ if (hcd->driver->endpoint_reset)
+ hcd->driver->endpoint_reset(hcd, ep);
+ else {
+ int epnum = usb_endpoint_num(&ep->desc);
+ int is_out = usb_endpoint_dir_out(&ep->desc);
+ int is_control = usb_endpoint_xfer_control(&ep->desc);
+
+ usb_settoggle(udev, epnum, is_out, 0);
+ if (is_control)
+ usb_settoggle(udev, epnum, !is_out, 0);
+ }
+}
+
/* Protect against drivers that try to unlink URBs after the device
* is gone, by waiting until all unlinks for @udev are finished.
* Since we don't currently track URBs by device, simply wait until
diff --git a/drivers/usb/core/hcd.h b/drivers/usb/core/hcd.h
index f750eb1ab59..e7d4479de41 100644
--- a/drivers/usb/core/hcd.h
+++ b/drivers/usb/core/hcd.h
@@ -206,6 +206,11 @@ struct hc_driver {
void (*endpoint_disable)(struct usb_hcd *hcd,
struct usb_host_endpoint *ep);
+ /* (optional) reset any endpoint state such as sequence number
+ and current window */
+ void (*endpoint_reset)(struct usb_hcd *hcd,
+ struct usb_host_endpoint *ep);
+
/* root hub support */
int (*hub_status_data) (struct usb_hcd *hcd, char *buf);
int (*hub_control) (struct usb_hcd *hcd,
@@ -234,6 +239,8 @@ extern void usb_hcd_flush_endpoint(struct usb_device *udev,
struct usb_host_endpoint *ep);
extern void usb_hcd_disable_endpoint(struct usb_device *udev,
struct usb_host_endpoint *ep);
+extern void usb_hcd_reset_endpoint(struct usb_device *udev,
+ struct usb_host_endpoint *ep);
extern void usb_hcd_synchronize_unlinks(struct usb_device *udev);
extern int usb_hcd_get_frame_number(struct usb_device *udev);
@@ -279,6 +286,13 @@ extern irqreturn_t usb_hcd_irq(int irq, void *__hcd);
extern void usb_hc_died(struct usb_hcd *hcd);
extern void usb_hcd_poll_rh_status(struct usb_hcd *hcd);
+/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
+#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
+#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
+#define usb_settoggle(dev, ep, out, bit) \
+ ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
+ ((bit) << (ep)))
+
/* -------------------------------------------------------------------------- */
/* Enumeration is only for the hub driver, or HCD virtual root hubs */
diff --git a/drivers/usb/core/message.c b/drivers/usb/core/message.c
index 30a0690f368..b6262837765 100644
--- a/drivers/usb/core/message.c
+++ b/drivers/usb/core/message.c
@@ -1002,8 +1002,7 @@ int usb_clear_halt(struct usb_device *dev, int pipe)
* the copy in usb-storage, for as long as we need two copies.
*/
- /* toggle was reset by the clear */
- usb_settoggle(dev, usb_pipeendpoint(pipe), usb_pipeout(pipe), 0);
+ usb_reset_endpoint(dev, endp);
return 0;
}
@@ -1076,6 +1075,30 @@ void usb_disable_endpoint(struct usb_device *dev, unsigned int epaddr,
}
/**
+ * usb_reset_endpoint - Reset an endpoint's state.
+ * @dev: the device whose endpoint is to be reset
+ * @epaddr: the endpoint's address. Endpoint number for output,
+ * endpoint number + USB_DIR_IN for input
+ *
+ * Resets any host-side endpoint state such as the toggle bit,
+ * sequence number or current window.
+ */
+void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr)
+{
+ unsigned int epnum = epaddr & USB_ENDPOINT_NUMBER_MASK;
+ struct usb_host_endpoint *ep;
+
+ if (usb_endpoint_out(epaddr))
+ ep = dev->ep_out[epnum];
+ else
+ ep = dev->ep_in[epnum];
+ if (ep)
+ usb_hcd_reset_endpoint(dev, ep);
+}
+EXPORT_SYMBOL_GPL(usb_reset_endpoint);
+
+
+/**
* usb_disable_interface -- Disable all endpoints for an interface
* @dev: the device whose interface is being disabled
* @intf: pointer to the interface descriptor
@@ -1117,7 +1140,6 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
usb_disable_endpoint(dev, i, true);
usb_disable_endpoint(dev, i + USB_DIR_IN, true);
}
- dev->toggle[0] = dev->toggle[1] = 0;
/* getting rid of interfaces will disconnect
* any drivers bound to them (a key side effect)
@@ -1154,28 +1176,24 @@ void usb_disable_device(struct usb_device *dev, int skip_ep0)
* usb_enable_endpoint - Enable an endpoint for USB communications
* @dev: the device whose interface is being enabled
* @ep: the endpoint
- * @reset_toggle: flag to set the endpoint's toggle back to 0
+ * @reset_ep: flag to reset the endpoint state
*
- * Resets the endpoint toggle if asked, and sets dev->ep_{in,out} pointers.
+ * Resets the endpoint state if asked, and sets dev->ep_{in,out} pointers.
* For control endpoints, both the input and output sides are handled.
*/
void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep,
- bool reset_toggle)
+ bool reset_ep)
{
int epnum = usb_endpoint_num(&ep->desc);
int is_out = usb_endpoint_dir_out(&ep->desc);
int is_control = usb_endpoint_xfer_control(&ep->desc);
- if (is_out || is_control) {
- if (reset_toggle)
- usb_settoggle(dev, epnum, 1, 0);
+ if (reset_ep)
+ usb_hcd_reset_endpoint(dev, ep);
+ if (is_out || is_control)
dev->ep_out[epnum] = ep;
- }
- if (!is_out || is_control) {
- if (reset_toggle)
- usb_settoggle(dev, epnum, 0, 0);
+ if (!is_out || is_control)
dev->ep_in[epnum] = ep;
- }
ep->enabled = 1;
}
@@ -1183,18 +1201,18 @@ void usb_enable_endpoint(struct usb_device *dev, struct usb_host_endpoint *ep,
* usb_enable_interface - Enable all the endpoints for an interface
* @dev: the device whose interface is being enabled
* @intf: pointer to the interface descriptor
- * @reset_toggles: flag to set the endpoints' toggles back to 0
+ * @reset_eps: flag to reset the endpoints' state
*
* Enables all the endpoints for the interface's current altsetting.
*/
void usb_enable_interface(struct usb_device *dev,
- struct usb_interface *intf, bool reset_toggles)
+ struct usb_interface *intf, bool reset_eps)
{
struct usb_host_interface *alt = intf->cur_altsetting;
int i;
for (i = 0; i < alt->desc.bNumEndpoints; ++i)
- usb_enable_endpoint(dev, &alt->endpoint[i], reset_toggles);
+ usb_enable_endpoint(dev, &alt->endpoint[i], reset_eps);
}
/**
@@ -1335,7 +1353,7 @@ EXPORT_SYMBOL_GPL(usb_set_interface);
* This issues a standard SET_CONFIGURATION request to the device using
* the current configuration. The effect is to reset most USB-related
* state in the device, including interface altsettings (reset to zero),
- * endpoint halts (cleared), and data toggle (only for bulk and interrupt
+ * endpoint halts (cleared), and endpoint state (only for bulk and interrupt
* endpoints). Other usbcore state is unchanged, including bindings of
* usb device drivers to interfaces.
*
@@ -1343,7 +1361,7 @@ EXPORT_SYMBOL_GPL(usb_set_interface);
* (multi-interface) devices. Instead, the driver for each interface may
* use usb_set_interface() on the interfaces it claims. Be careful though;
* some devices don't support the SET_INTERFACE request, and others won't
- * reset all the interface state (notably data toggles). Resetting the whole
+ * reset all the interface state (notably endpoint state). Resetting the whole
* configuration would affect other drivers' interfaces.
*
* The caller must own the device lock.
@@ -1376,8 +1394,6 @@ int usb_reset_configuration(struct usb_device *dev)
if (retval < 0)
return retval;
- dev->toggle[0] = dev->toggle[1] = 0;
-
/* re-init hc/hcd interface/endpoint state */
for (i = 0; i < config->desc.bNumInterfaces; i++) {
struct usb_interface *intf = config->interface[i];
diff --git a/drivers/usb/core/usb.c b/drivers/usb/core/usb.c
index dcfc072630c..7eee400d3e3 100644
--- a/drivers/usb/core/usb.c
+++ b/drivers/usb/core/usb.c
@@ -362,7 +362,7 @@ struct usb_device *usb_alloc_dev(struct usb_device *parent,
dev->ep0.desc.bLength = USB_DT_ENDPOINT_SIZE;
dev->ep0.desc.bDescriptorType = USB_DT_ENDPOINT;
/* ep0 maxpacket comes later, from device descriptor */
- usb_enable_endpoint(dev, &dev->ep0, true);
+ usb_enable_endpoint(dev, &dev->ep0, false);
dev->can_submit = 1;
/* Save readable and stable topology id, distinguishing devices
diff --git a/drivers/usb/gadget/u_ether.c b/drivers/usb/gadget/u_ether.c
index 96d65ca06ec..4007770f7ed 100644
--- a/drivers/usb/gadget/u_ether.c
+++ b/drivers/usb/gadget/u_ether.c
@@ -175,12 +175,6 @@ static void eth_get_drvinfo(struct net_device *net, struct ethtool_drvinfo *p)
strlcpy(p->bus_info, dev_name(&dev->gadget->dev), sizeof p->bus_info);
}
-static u32 eth_get_link(struct net_device *net)
-{
- struct eth_dev *dev = netdev_priv(net);
- return dev->gadget->speed != USB_SPEED_UNKNOWN;
-}
-
/* REVISIT can also support:
* - WOL (by tracking suspends and issuing remote wakeup)
* - msglevel (implies updated messaging)
@@ -189,7 +183,7 @@ static u32 eth_get_link(struct net_device *net)
static struct ethtool_ops ops = {
.get_drvinfo = eth_get_drvinfo,
- .get_link = eth_get_link
+ .get_link = ethtool_op_get_link,
};
static void defer_kevent(struct eth_dev *dev, int flag)
diff --git a/drivers/usb/host/whci/asl.c b/drivers/usb/host/whci/asl.c
index 958751ccea4..c2050785a81 100644
--- a/drivers/usb/host/whci/asl.c
+++ b/drivers/usb/host/whci/asl.c
@@ -122,7 +122,8 @@ static uint32_t process_qset(struct whc *whc, struct whc_qset *qset)
process_inactive_qtd(whc, qset, td);
}
- update |= qset_add_qtds(whc, qset);
+ if (!qset->remove)
+ update |= qset_add_qtds(whc, qset);
done:
/*
@@ -254,23 +255,29 @@ int asl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags)
spin_lock_irqsave(&whc->lock, flags);
+ err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
+ if (err < 0) {
+ spin_unlock_irqrestore(&whc->lock, flags);
+ return err;
+ }
+
qset = get_qset(whc, urb, GFP_ATOMIC);
if (qset == NULL)
err = -ENOMEM;
else
err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
if (!err) {
- usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
if (!qset->in_sw_list)
asl_qset_insert_begin(whc, qset);
- }
+ } else
+ usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb);
spin_unlock_irqrestore(&whc->lock, flags);
if (!err)
queue_work(whc->workqueue, &whc->async_work);
- return 0;
+ return err;
}
/**
diff --git a/drivers/usb/host/whci/hcd.c b/drivers/usb/host/whci/hcd.c
index 1569afd6245..e019a5058ab 100644
--- a/drivers/usb/host/whci/hcd.c
+++ b/drivers/usb/host/whci/hcd.c
@@ -186,6 +186,28 @@ static void whc_endpoint_disable(struct usb_hcd *usb_hcd,
}
}
+static void whc_endpoint_reset(struct usb_hcd *usb_hcd,
+ struct usb_host_endpoint *ep)
+{
+ struct wusbhc *wusbhc = usb_hcd_to_wusbhc(usb_hcd);
+ struct whc *whc = wusbhc_to_whc(wusbhc);
+ struct whc_qset *qset;
+
+ qset = ep->hcpriv;
+ if (qset) {
+ qset->remove = 1;
+
+ if (usb_endpoint_xfer_bulk(&ep->desc)
+ || usb_endpoint_xfer_control(&ep->desc))
+ queue_work(whc->workqueue, &whc->async_work);
+ else
+ queue_work(whc->workqueue, &whc->periodic_work);
+
+ qset_reset(whc, qset);
+ }
+}
+
+
static struct hc_driver whc_hc_driver = {
.description = "whci-hcd",
.product_desc = "Wireless host controller",
@@ -200,6 +222,7 @@ static struct hc_driver whc_hc_driver = {
.urb_enqueue = whc_urb_enqueue,
.urb_dequeue = whc_urb_dequeue,
.endpoint_disable = whc_endpoint_disable,
+ .endpoint_reset = whc_endpoint_reset,
.hub_status_data = wusbhc_rh_status_data,
.hub_control = wusbhc_rh_control,
diff --git a/drivers/usb/host/whci/pzl.c b/drivers/usb/host/whci/pzl.c
index df8b85f0709..ff4ef9e910d 100644
--- a/drivers/usb/host/whci/pzl.c
+++ b/drivers/usb/host/whci/pzl.c
@@ -128,7 +128,8 @@ static enum whc_update pzl_process_qset(struct whc *whc, struct whc_qset *qset)
process_inactive_qtd(whc, qset, td);
}
- update |= qset_add_qtds(whc, qset);
+ if (!qset->remove)
+ update |= qset_add_qtds(whc, qset);
done:
/*
@@ -282,23 +283,29 @@ int pzl_urb_enqueue(struct whc *whc, struct urb *urb, gfp_t mem_flags)
spin_lock_irqsave(&whc->lock, flags);
+ err = usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
+ if (err < 0) {
+ spin_unlock_irqrestore(&whc->lock, flags);
+ return err;
+ }
+
qset = get_qset(whc, urb, GFP_ATOMIC);
if (qset == NULL)
err = -ENOMEM;
else
err = qset_add_urb(whc, qset, urb, GFP_ATOMIC);
if (!err) {
- usb_hcd_link_urb_to_ep(&whc->wusbhc.usb_hcd, urb);
if (!qset->in_sw_list)
qset_insert_in_sw_list(whc, qset);
- }
+ } else
+ usb_hcd_unlink_urb_from_ep(&whc->wusbhc.usb_hcd, urb);
spin_unlock_irqrestore(&whc->lock, flags);
if (!err)
queue_work(whc->workqueue, &whc->periodic_work);
- return 0;
+ return err;
}
/**
@@ -353,7 +360,6 @@ void pzl_qset_delete(struct whc *whc, struct whc_qset *qset)
qset_delete(whc, qset);
}
-
/**
* pzl_init - initialize the periodic zone list
* @whc: the WHCI host controller
diff --git a/drivers/usb/host/whci/qset.c b/drivers/usb/host/whci/qset.c
index 7be74314ee1..640b38fbd05 100644
--- a/drivers/usb/host/whci/qset.c
+++ b/drivers/usb/host/whci/qset.c
@@ -89,11 +89,16 @@ static void qset_fill_qh(struct whc_qset *qset, struct urb *urb)
QH_INFO3_TX_RATE_53_3
| QH_INFO3_TX_PWR(0) /* 0 == max power */
);
+
+ qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
}
/**
* qset_clear - clear fields in a qset so it may be reinserted into a
- * schedule
+ * schedule.
+ *
+ * The sequence number and current window are not cleared (see
+ * qset_reset()).
*/
void qset_clear(struct whc *whc, struct whc_qset *qset)
{
@@ -101,9 +106,8 @@ void qset_clear(struct whc *whc, struct whc_qset *qset)
qset->remove = 0;
qset->qh.link = cpu_to_le32(QH_LINK_NTDS(8) | QH_LINK_T);
- qset->qh.status = cpu_to_le16(QH_STATUS_ICUR(qset->td_start));
+ qset->qh.status = qset->qh.status & QH_STATUS_SEQ_MASK;
qset->qh.err_count = 0;
- qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
qset->qh.scratch[0] = 0;
qset->qh.scratch[1] = 0;
qset->qh.scratch[2] = 0;
@@ -114,6 +118,20 @@ void qset_clear(struct whc *whc, struct whc_qset *qset)
}
/**
+ * qset_reset - reset endpoint state in a qset.
+ *
+ * Clears the sequence number and current window. This qset must not
+ * be in the ASL or PZL.
+ */
+void qset_reset(struct whc *whc, struct whc_qset *qset)
+{
+ wait_for_completion(&qset->remove_complete);
+
+ qset->qh.status &= ~QH_STATUS_SEQ_MASK;
+ qset->qh.cur_window = cpu_to_le32((1 << qset->max_burst) - 1);
+}
+
+/**
* get_qset - get the qset for an async endpoint
*
* A new qset is created if one does not already exist.
diff --git a/drivers/usb/host/whci/whcd.h b/drivers/usb/host/whci/whcd.h
index d3543a181dc..24e94d983c5 100644
--- a/drivers/usb/host/whci/whcd.h
+++ b/drivers/usb/host/whci/whcd.h
@@ -184,6 +184,7 @@ void qset_free(struct whc *whc, struct whc_qset *qset);
struct whc_qset *get_qset(struct whc *whc, struct urb *urb, gfp_t mem_flags);
void qset_delete(struct whc *whc, struct whc_qset *qset);
void qset_clear(struct whc *whc, struct whc_qset *qset);
+void qset_reset(struct whc *whc, struct whc_qset *qset);
int qset_add_urb(struct whc *whc, struct whc_qset *qset, struct urb *urb,
gfp_t mem_flags);
void qset_free_std(struct whc *whc, struct whc_std *std);
diff --git a/drivers/usb/host/whci/whci-hc.h b/drivers/usb/host/whci/whci-hc.h
index 51df7e313b3..794dba0d0f0 100644
--- a/drivers/usb/host/whci/whci-hc.h
+++ b/drivers/usb/host/whci/whci-hc.h
@@ -185,6 +185,7 @@ struct whc_qhead {
#define QH_STATUS_FLOW_CTRL (1 << 15)
#define QH_STATUS_ICUR(i) ((i) << 5)
#define QH_STATUS_TO_ICUR(s) (((s) >> 5) & 0x7)
+#define QH_STATUS_SEQ_MASK 0x1f
/**
* usb_pipe_to_qh_type - USB core pipe type to QH transfer type
diff --git a/drivers/usb/musb/cppi_dma.c b/drivers/usb/musb/cppi_dma.c
index 569ef0fed0f..1976e9b4180 100644
--- a/drivers/usb/musb/cppi_dma.c
+++ b/drivers/usb/musb/cppi_dma.c
@@ -579,6 +579,7 @@ cppi_next_tx_segment(struct musb *musb, struct cppi_channel *tx)
* trigger the "send a ZLP?" confusion.
*/
rndis = (maxpacket & 0x3f) == 0
+ && length > maxpacket
&& length < 0xffff
&& (length % maxpacket) != 0;
@@ -1228,27 +1229,7 @@ void cppi_completion(struct musb *musb, u32 rx, u32 tx)
hw_ep = tx_ch->hw_ep;
- /* Peripheral role never repurposes the
- * endpoint, so immediate completion is
- * safe. Host role waits for the fifo
- * to empty (TXPKTRDY irq) before going
- * to the next queued bulk transfer.
- */
- if (is_host_active(cppi->musb)) {
-#if 0
- /* WORKAROUND because we may
- * not always get TXKPTRDY ...
- */
- int csr;
-
- csr = musb_readw(hw_ep->regs,
- MUSB_TXCSR);
- if (csr & MUSB_TXCSR_TXPKTRDY)
-#endif
- completed = false;
- }
- if (completed)
- musb_dma_completion(musb, index + 1, 1);
+ musb_dma_completion(musb, index + 1, 1);
} else {
/* Bigger transfer than we could fit in
diff --git a/drivers/usb/musb/musb_core.c b/drivers/usb/musb/musb_core.c
index 338cd1611ab..0112353ec97 100644
--- a/drivers/usb/musb/musb_core.c
+++ b/drivers/usb/musb/musb_core.c
@@ -2170,26 +2170,22 @@ static int musb_suspend(struct platform_device *pdev, pm_message_t message)
return 0;
}
-static int musb_resume(struct platform_device *pdev)
+static int musb_resume_early(struct platform_device *pdev)
{
- unsigned long flags;
struct musb *musb = dev_to_musb(&pdev->dev);
if (!musb->clock)
return 0;
- spin_lock_irqsave(&musb->lock, flags);
-
if (musb->set_clock)
musb->set_clock(musb->clock, 1);
else
clk_enable(musb->clock);
/* for static cmos like DaVinci, register values were preserved
- * unless for some reason the whole soc powered down and we're
- * not treating that as a whole-system restart (e.g. swsusp)
+ * unless for some reason the whole soc powered down or the USB
+ * module got reset through the PSC (vs just being disabled).
*/
- spin_unlock_irqrestore(&musb->lock, flags);
return 0;
}
@@ -2207,7 +2203,7 @@ static struct platform_driver musb_driver = {
.remove = __devexit_p(musb_remove),
.shutdown = musb_shutdown,
.suspend = musb_suspend,
- .resume = musb_resume,
+ .resume_early = musb_resume_early,
};
/*-------------------------------------------------------------------------*/
diff --git a/drivers/usb/musb/musb_gadget.c b/drivers/usb/musb/musb_gadget.c
index c7ebd0867fc..f79440cdfe7 100644
--- a/drivers/usb/musb/musb_gadget.c
+++ b/drivers/usb/musb/musb_gadget.c
@@ -165,9 +165,15 @@ static void nuke(struct musb_ep *ep, const int status)
if (is_dma_capable() && ep->dma) {
struct dma_controller *c = ep->musb->dma_controller;
int value;
+
if (ep->is_in) {
+ /*
+ * The programming guide says that we must not clear
+ * the DMAMODE bit before DMAENAB, so we only
+ * clear it in the second write...
+ */
musb_writew(epio, MUSB_TXCSR,
- 0 | MUSB_TXCSR_FLUSHFIFO);
+ MUSB_TXCSR_DMAMODE | MUSB_TXCSR_FLUSHFIFO);
musb_writew(epio, MUSB_TXCSR,
0 | MUSB_TXCSR_FLUSHFIFO);
} else {
@@ -230,7 +236,7 @@ static inline int max_ep_writesize(struct musb *musb, struct musb_ep *ep)
| IN token(s) are recd from Host.
| -> DMA interrupt on completion
| calls TxAvail.
- | -> stop DMA, ~DmaEenab,
+ | -> stop DMA, ~DMAENAB,
| -> set TxPktRdy for last short pkt or zlp
| -> Complete Request
| -> Continue next request (call txstate)
@@ -315,9 +321,17 @@ static void txstate(struct musb *musb, struct musb_request *req)
request->dma, request_size);
if (use_dma) {
if (musb_ep->dma->desired_mode == 0) {
- /* ASSERT: DMAENAB is clear */
- csr &= ~(MUSB_TXCSR_AUTOSET |
- MUSB_TXCSR_DMAMODE);
+ /*
+ * We must not clear the DMAMODE bit
+ * before the DMAENAB bit -- and the
+ * latter doesn't always get cleared
+ * before we get here...
+ */
+ csr &= ~(MUSB_TXCSR_AUTOSET
+ | MUSB_TXCSR_DMAENAB);
+ musb_writew(epio, MUSB_TXCSR, csr
+ | MUSB_TXCSR_P_WZC_BITS);
+ csr &= ~MUSB_TXCSR_DMAMODE;
csr |= (MUSB_TXCSR_DMAENAB |
MUSB_TXCSR_MODE);
/* against programming guide */
@@ -334,10 +348,7 @@ static void txstate(struct musb *musb, struct musb_request *req)
#elif defined(CONFIG_USB_TI_CPPI_DMA)
/* program endpoint CSR first, then setup DMA */
- csr &= ~(MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAMODE
- | MUSB_TXCSR_P_UNDERRUN
- | MUSB_TXCSR_TXPKTRDY);
+ csr &= ~(MUSB_TXCSR_P_UNDERRUN | MUSB_TXCSR_TXPKTRDY);
csr |= MUSB_TXCSR_MODE | MUSB_TXCSR_DMAENAB;
musb_writew(epio, MUSB_TXCSR,
(MUSB_TXCSR_P_WZC_BITS & ~MUSB_TXCSR_P_UNDERRUN)
@@ -364,8 +375,8 @@ static void txstate(struct musb *musb, struct musb_request *req)
if (!use_dma) {
c->channel_release(musb_ep->dma);
musb_ep->dma = NULL;
- /* ASSERT: DMAENAB clear */
- csr &= ~(MUSB_TXCSR_DMAMODE | MUSB_TXCSR_MODE);
+ csr &= ~MUSB_TXCSR_DMAENAB;
+ musb_writew(epio, MUSB_TXCSR, csr);
/* invariant: prequest->buf is non-null */
}
#elif defined(CONFIG_USB_TUSB_OMAP_DMA)
diff --git a/drivers/usb/musb/musb_host.c b/drivers/usb/musb/musb_host.c
index 499c431a6d6..db1b57415ec 100644
--- a/drivers/usb/musb/musb_host.c
+++ b/drivers/usb/musb/musb_host.c
@@ -4,6 +4,7 @@
* Copyright 2005 Mentor Graphics Corporation
* Copyright (C) 2005-2006 by Texas Instruments
* Copyright (C) 2006-2007 Nokia Corporation
+ * Copyright (C) 2008-2009 MontaVista Software, Inc. <source@mvista.com>
*
* This program is free software; you can redistribute it and/or
* modify it under the terms of the GNU General Public License
@@ -96,8 +97,8 @@
static void musb_ep_program(struct musb *musb, u8 epnum,
- struct urb *urb, unsigned int nOut,
- u8 *buf, u32 len);
+ struct urb *urb, int is_out,
+ u8 *buf, u32 offset, u32 len);
/*
* Clear TX fifo. Needed to avoid BABBLE errors.
@@ -125,6 +126,29 @@ static void musb_h_tx_flush_fifo(struct musb_hw_ep *ep)
}
}
+static void musb_h_ep0_flush_fifo(struct musb_hw_ep *ep)
+{
+ void __iomem *epio = ep->regs;
+ u16 csr;
+ int retries = 5;
+
+ /* scrub any data left in the fifo */
+ do {
+ csr = musb_readw(epio, MUSB_TXCSR);
+ if (!(csr & (MUSB_CSR0_TXPKTRDY | MUSB_CSR0_RXPKTRDY)))
+ break;
+ musb_writew(epio, MUSB_TXCSR, MUSB_CSR0_FLUSHFIFO);
+ csr = musb_readw(epio, MUSB_TXCSR);
+ udelay(10);
+ } while (--retries);
+
+ WARN(!retries, "Could not flush host TX%d fifo: csr: %04x\n",
+ ep->epnum, csr);
+
+ /* and reset for the next transfer */
+ musb_writew(epio, MUSB_TXCSR, 0);
+}
+
/*
* Start transmit. Caller is responsible for locking shared resources.
* musb must be locked.
@@ -145,13 +169,15 @@ static inline void musb_h_tx_start(struct musb_hw_ep *ep)
}
-static inline void cppi_host_txdma_start(struct musb_hw_ep *ep)
+static inline void musb_h_tx_dma_start(struct musb_hw_ep *ep)
{
u16 txcsr;
/* NOTE: no locks here; caller should lock and select EP */
txcsr = musb_readw(ep->regs, MUSB_TXCSR);
txcsr |= MUSB_TXCSR_DMAENAB | MUSB_TXCSR_H_WZC_BITS;
+ if (is_cppi_enabled())
+ txcsr |= MUSB_TXCSR_DMAMODE;
musb_writew(ep->regs, MUSB_TXCSR, txcsr);
}
@@ -166,9 +192,10 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
{
u16 frame;
u32 len;
- void *buf;
void __iomem *mbase = musb->mregs;
struct urb *urb = next_urb(qh);
+ void *buf = urb->transfer_buffer;
+ u32 offset = 0;
struct musb_hw_ep *hw_ep = qh->hw_ep;
unsigned pipe = urb->pipe;
u8 address = usb_pipedevice(pipe);
@@ -191,7 +218,7 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
case USB_ENDPOINT_XFER_ISOC:
qh->iso_idx = 0;
qh->frame = 0;
- buf = urb->transfer_buffer + urb->iso_frame_desc[0].offset;
+ offset = urb->iso_frame_desc[0].offset;
len = urb->iso_frame_desc[0].length;
break;
default: /* bulk, interrupt */
@@ -209,14 +236,14 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
case USB_ENDPOINT_XFER_ISOC: s = "-iso"; break;
default: s = "-intr"; break;
}; s; }),
- epnum, buf, len);
+ epnum, buf + offset, len);
/* Configure endpoint */
if (is_in || hw_ep->is_shared_fifo)
hw_ep->in_qh = qh;
else
hw_ep->out_qh = qh;
- musb_ep_program(musb, epnum, urb, !is_in, buf, len);
+ musb_ep_program(musb, epnum, urb, !is_in, buf, offset, len);
/* transmit may have more work: start it when it is time */
if (is_in)
@@ -227,7 +254,6 @@ musb_start_urb(struct musb *musb, int is_in, struct musb_qh *qh)
case USB_ENDPOINT_XFER_ISOC:
case USB_ENDPOINT_XFER_INT:
DBG(3, "check whether there's still time for periodic Tx\n");
- qh->iso_idx = 0;
frame = musb_readw(mbase, MUSB_FRAME);
/* FIXME this doesn't implement that scheduling policy ...
* or handle framecounter wrapping
@@ -256,7 +282,7 @@ start:
if (!hw_ep->tx_channel)
musb_h_tx_start(hw_ep);
else if (is_cppi_enabled() || tusb_dma_omap())
- cppi_host_txdma_start(hw_ep);
+ musb_h_tx_dma_start(hw_ep);
}
}
@@ -567,10 +593,17 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
csr = musb_readw(ep->regs, MUSB_TXCSR);
if (csr & MUSB_TXCSR_MODE) {
musb_h_tx_flush_fifo(ep);
+ csr = musb_readw(ep->regs, MUSB_TXCSR);
musb_writew(ep->regs, MUSB_TXCSR,
- MUSB_TXCSR_FRCDATATOG);
+ csr | MUSB_TXCSR_FRCDATATOG);
}
- /* clear mode (and everything else) to enable Rx */
+
+ /*
+ * Clear the MODE bit (and everything else) to enable Rx.
+ * NOTE: we mustn't clear the DMAMODE bit before DMAENAB.
+ */
+ if (csr & MUSB_TXCSR_DMAMODE)
+ musb_writew(ep->regs, MUSB_TXCSR, MUSB_TXCSR_DMAMODE);
musb_writew(ep->regs, MUSB_TXCSR, 0);
/* scrub all previous state, clearing toggle */
@@ -601,14 +634,68 @@ musb_rx_reinit(struct musb *musb, struct musb_qh *qh, struct musb_hw_ep *ep)
ep->rx_reinit = 0;
}
+static bool musb_tx_dma_program(struct dma_controller *dma,
+ struct musb_hw_ep *hw_ep, struct musb_qh *qh,
+ struct urb *urb, u32 offset, u32 length)
+{
+ struct dma_channel *channel = hw_ep->tx_channel;
+ void __iomem *epio = hw_ep->regs;
+ u16 pkt_size = qh->maxpacket;
+ u16 csr;
+ u8 mode;
+
+#ifdef CONFIG_USB_INVENTRA_DMA
+ if (length > channel->max_len)
+ length = channel->max_len;
+
+ csr = musb_readw(epio, MUSB_TXCSR);
+ if (length > pkt_size) {
+ mode = 1;
+ csr |= MUSB_TXCSR_AUTOSET
+ | MUSB_TXCSR_DMAMODE
+ | MUSB_TXCSR_DMAENAB;
+ } else {
+ mode = 0;
+ csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAMODE);
+ csr |= MUSB_TXCSR_DMAENAB; /* against programmer's guide */
+ }
+ channel->desired_mode = mode;
+ musb_writew(epio, MUSB_TXCSR, csr);
+#else
+ if (!is_cppi_enabled() && !tusb_dma_omap())
+ return false;
+
+ channel->actual_len = 0;
+
+ /*
+ * TX uses "RNDIS" mode automatically but needs help
+ * to identify the zero-length-final-packet case.
+ */
+ mode = (urb->transfer_flags & URB_ZERO_PACKET) ? 1 : 0;
+#endif
+
+ qh->segsize = length;
+
+ if (!dma->channel_program(channel, pkt_size, mode,
+ urb->transfer_dma + offset, length)) {
+ dma->channel_release(channel);
+ hw_ep->tx_channel = NULL;
+
+ csr = musb_readw(epio, MUSB_TXCSR);
+ csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
+ musb_writew(epio, MUSB_TXCSR, csr | MUSB_TXCSR_H_WZC_BITS);
+ return false;
+ }
+ return true;
+}
/*
* Program an HDRC endpoint as per the given URB
* Context: irqs blocked, controller lock held
*/
static void musb_ep_program(struct musb *musb, u8 epnum,
- struct urb *urb, unsigned int is_out,
- u8 *buf, u32 len)
+ struct urb *urb, int is_out,
+ u8 *buf, u32 offset, u32 len)
{
struct dma_controller *dma_controller;
struct dma_channel *dma_channel;
@@ -667,12 +754,17 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
/* general endpoint setup */
if (epnum) {
- /* ASSERT: TXCSR_DMAENAB was already cleared */
-
/* flush all old state, set default */
musb_h_tx_flush_fifo(hw_ep);
+
+ /*
+ * We must not clear the DMAMODE bit before or in
+ * the same cycle with the DMAENAB bit, so we clear
+ * the latter first...
+ */
csr &= ~(MUSB_TXCSR_H_NAKTIMEOUT
- | MUSB_TXCSR_DMAMODE
+ | MUSB_TXCSR_AUTOSET
+ | MUSB_TXCSR_DMAENAB
| MUSB_TXCSR_FRCDATATOG
| MUSB_TXCSR_H_RXSTALL
| MUSB_TXCSR_H_ERROR
@@ -680,24 +772,20 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
);
csr |= MUSB_TXCSR_MODE;
- if (usb_gettoggle(urb->dev,
- qh->epnum, 1))
+ if (usb_gettoggle(urb->dev, qh->epnum, 1))
csr |= MUSB_TXCSR_H_WR_DATATOGGLE
| MUSB_TXCSR_H_DATATOGGLE;
else
csr |= MUSB_TXCSR_CLRDATATOG;
- /* twice in case of double packet buffering */
musb_writew(epio, MUSB_TXCSR, csr);
/* REVISIT may need to clear FLUSHFIFO ... */
+ csr &= ~MUSB_TXCSR_DMAMODE;
musb_writew(epio, MUSB_TXCSR, csr);
csr = musb_readw(epio, MUSB_TXCSR);
} else {
/* endpoint 0: just flush */
- musb_writew(epio, MUSB_CSR0,
- csr | MUSB_CSR0_FLUSHFIFO);
- musb_writew(epio, MUSB_CSR0,
- csr | MUSB_CSR0_FLUSHFIFO);
+ musb_h_ep0_flush_fifo(hw_ep);
}
/* target addr and (for multipoint) hub addr/port */
@@ -734,113 +822,14 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
else
load_count = min((u32) packet_sz, len);
-#ifdef CONFIG_USB_INVENTRA_DMA
- if (dma_channel) {
-
- /* clear previous state */
- csr = musb_readw(epio, MUSB_TXCSR);
- csr &= ~(MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAMODE
- | MUSB_TXCSR_DMAENAB);
- csr |= MUSB_TXCSR_MODE;
- musb_writew(epio, MUSB_TXCSR,
- csr | MUSB_TXCSR_MODE);
-
- qh->segsize = min(len, dma_channel->max_len);
-
- if (qh->segsize <= packet_sz)
- dma_channel->desired_mode = 0;
- else
- dma_channel->desired_mode = 1;
-
-
- if (dma_channel->desired_mode == 0) {
- csr &= ~(MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAMODE);
- csr |= (MUSB_TXCSR_DMAENAB);
- /* against programming guide */
- } else
- csr |= (MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAENAB
- | MUSB_TXCSR_DMAMODE);
-
- musb_writew(epio, MUSB_TXCSR, csr);
-
- dma_ok = dma_controller->channel_program(
- dma_channel, packet_sz,
- dma_channel->desired_mode,
- urb->transfer_dma,
- qh->segsize);
- if (dma_ok) {
- load_count = 0;
- } else {
- dma_controller->channel_release(dma_channel);
- if (is_out)
- hw_ep->tx_channel = NULL;
- else
- hw_ep->rx_channel = NULL;
- dma_channel = NULL;
- }
- }
-#endif
-
- /* candidate for DMA */
- if ((is_cppi_enabled() || tusb_dma_omap()) && dma_channel) {
-
- /* program endpoint CSRs first, then setup DMA.
- * assume CPPI setup succeeds.
- * defer enabling dma.
- */
- csr = musb_readw(epio, MUSB_TXCSR);
- csr &= ~(MUSB_TXCSR_AUTOSET
- | MUSB_TXCSR_DMAMODE
- | MUSB_TXCSR_DMAENAB);
- csr |= MUSB_TXCSR_MODE;
- musb_writew(epio, MUSB_TXCSR,
- csr | MUSB_TXCSR_MODE);
-
- dma_channel->actual_len = 0L;
- qh->segsize = len;
-
- /* TX uses "rndis" mode automatically, but needs help
- * to identify the zero-length-final-packet case.
- */
- dma_ok = dma_controller->channel_program(
- dma_channel, packet_sz,
- (urb->transfer_flags
- & URB_ZERO_PACKET)
- == URB_ZERO_PACKET,
- urb->transfer_dma,
- qh->segsize);
- if (dma_ok) {
- load_count = 0;
- } else {
- dma_controller->channel_release(dma_channel);
- hw_ep->tx_channel = NULL;
- dma_channel = NULL;
-
- /* REVISIT there's an error path here that
- * needs handling: can't do dma, but
- * there's no pio buffer address...
- */
- }
- }
+ if (dma_channel && musb_tx_dma_program(dma_controller,
+ hw_ep, qh, urb, offset, len))
+ load_count = 0;
if (load_count) {
- /* ASSERT: TXCSR_DMAENAB was already cleared */
-
/* PIO to load FIFO */
qh->segsize = load_count;
musb_write_fifo(hw_ep, load_count, buf);
- csr = musb_readw(epio, MUSB_TXCSR);
- csr &= ~(MUSB_TXCSR_DMAENAB
- | MUSB_TXCSR_DMAMODE
- | MUSB_TXCSR_AUTOSET);
- /* write CSR */
- csr |= MUSB_TXCSR_MODE;
-
- if (epnum)
- musb_writew(epio, MUSB_TXCSR, csr);
}
/* re-enable interrupt */
@@ -895,7 +884,7 @@ static void musb_ep_program(struct musb *musb, u8 epnum,
dma_channel, packet_sz,
!(urb->transfer_flags
& URB_SHORT_NOT_OK),
- urb->transfer_dma,
+ urb->transfer_dma + offset,
qh->segsize);
if (!dma_ok) {
dma_controller->channel_release(
@@ -1063,11 +1052,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
musb_writew(epio, MUSB_CSR0, csr);
} else {
- csr |= MUSB_CSR0_FLUSHFIFO;
- musb_writew(epio, MUSB_CSR0, csr);
- musb_writew(epio, MUSB_CSR0, csr);
- csr &= ~MUSB_CSR0_H_NAKTIMEOUT;
- musb_writew(epio, MUSB_CSR0, csr);
+ musb_h_ep0_flush_fifo(hw_ep);
}
musb_writeb(epio, MUSB_NAKLIMIT0, 0);
@@ -1081,10 +1066,7 @@ irqreturn_t musb_h_ep0_irq(struct musb *musb)
* SHOULD NEVER HAPPEN! */
ERR("no URB for end 0\n");
- musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
- musb_writew(epio, MUSB_CSR0, MUSB_CSR0_FLUSHFIFO);
- musb_writew(epio, MUSB_CSR0, 0);
-
+ musb_h_ep0_flush_fifo(hw_ep);
goto done;
}
@@ -1145,8 +1127,8 @@ void musb_host_tx(struct musb *musb, u8 epnum)
int pipe;
bool done = false;
u16 tx_csr;
- size_t wLength = 0;
- u8 *buf = NULL;
+ size_t length = 0;
+ size_t offset = 0;
struct urb *urb;
struct musb_hw_ep *hw_ep = musb->endpoints + epnum;
void __iomem *epio = hw_ep->regs;
@@ -1164,7 +1146,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
/* with CPPI, DMA sometimes triggers "extra" irqs */
if (!urb) {
DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
- goto finish;
+ return;
}
pipe = urb->pipe;
@@ -1201,7 +1183,7 @@ void musb_host_tx(struct musb *musb, u8 epnum)
musb_writew(epio, MUSB_TXCSR,
MUSB_TXCSR_H_WZC_BITS
| MUSB_TXCSR_TXPKTRDY);
- goto finish;
+ return;
}
if (status) {
@@ -1233,29 +1215,89 @@ void musb_host_tx(struct musb *musb, u8 epnum)
/* second cppi case */
if (dma_channel_status(dma) == MUSB_DMA_STATUS_BUSY) {
DBG(4, "extra TX%d ready, csr %04x\n", epnum, tx_csr);
- goto finish;
+ return;
+ }
+
+ if (is_dma_capable() && dma && !status) {
+ /*
+ * DMA has completed. But if we're using DMA mode 1 (multi
+ * packet DMA), we need a terminal TXPKTRDY interrupt before
+ * we can consider this transfer completed, lest we trash
+ * its last packet when writing the next URB's data. So we
+ * switch back to mode 0 to get that interrupt; we'll come
+ * back here once it happens.
+ */
+ if (tx_csr & MUSB_TXCSR_DMAMODE) {
+ /*
+ * We shouldn't clear DMAMODE with DMAENAB set; so
+ * clear them in a safe order. That should be OK
+ * once TXPKTRDY has been set (and I've never seen
+ * it being 0 at this moment -- DMA interrupt latency
+ * is significant) but if it hasn't been then we have
+ * no choice but to stop being polite and ignore the
+ * programmer's guide... :-)
+ *
+ * Note that we must write TXCSR with TXPKTRDY cleared
+ * in order not to re-trigger the packet send (this bit
+ * can't be cleared by CPU), and there's another caveat:
+ * TXPKTRDY may be set shortly and then cleared in the
+ * double-buffered FIFO mode, so we do an extra TXCSR
+ * read for debouncing...
+ */
+ tx_csr &= musb_readw(epio, MUSB_TXCSR);
+ if (tx_csr & MUSB_TXCSR_TXPKTRDY) {
+ tx_csr &= ~(MUSB_TXCSR_DMAENAB |
+ MUSB_TXCSR_TXPKTRDY);
+ musb_writew(epio, MUSB_TXCSR,
+ tx_csr | MUSB_TXCSR_H_WZC_BITS);
+ }
+ tx_csr &= ~(MUSB_TXCSR_DMAMODE |
+ MUSB_TXCSR_TXPKTRDY);
+ musb_writew(epio, MUSB_TXCSR,
+ tx_csr | MUSB_TXCSR_H_WZC_BITS);
+
+ /*
+ * There is no guarantee that we'll get an interrupt
+ * after clearing DMAMODE as we might have done this
+ * too late (after TXPKTRDY was cleared by controller).
+ * Re-read TXCSR as we have spoiled its previous value.
+ */
+ tx_csr = musb_readw(epio, MUSB_TXCSR);
+ }
+ /*
+ * We may get here from a DMA completion or TXPKTRDY interrupt.
+ * In any case, we must check the FIFO status here and bail out
+ * only if the FIFO still has data -- that should prevent the
+ * "missed" TXPKTRDY interrupts and deal with double-buffered
+ * FIFO mode too...
+ */
+ if (tx_csr & (MUSB_TXCSR_FIFONOTEMPTY | MUSB_TXCSR_TXPKTRDY)) {
+ DBG(2, "DMA complete but packet still in FIFO, "
+ "CSR %04x\n", tx_csr);
+ return;
+ }
}
- /* REVISIT this looks wrong... */
if (!status || dma || usb_pipeisoc(pipe)) {
if (dma)
- wLength = dma->actual_len;
+ length = dma->actual_len;
else
- wLength = qh->segsize;
- qh->offset += wLength;
+ length = qh->segsize;
+ qh->offset += length;
if (usb_pipeisoc(pipe)) {
struct usb_iso_packet_descriptor *d;
d = urb->iso_frame_desc + qh->iso_idx;
- d->actual_length = qh->segsize;
+ d->actual_length = length;
+ d->status = status;
if (++qh->iso_idx >= urb->number_of_packets) {
done = true;
} else {
d++;
- buf = urb->transfer_buffer + d->offset;
- wLength = d->length;
+ offset = d->offset;
+ length = d->length;
}
} else if (dma) {
done = true;
@@ -1268,10 +1310,8 @@ void musb_host_tx(struct musb *musb, u8 epnum)
& URB_ZERO_PACKET))
done = true;
if (!done) {
- buf = urb->transfer_buffer
- + qh->offset;
- wLength = urb->transfer_buffer_length
- - qh->offset;
+ offset = qh->offset;
+ length = urb->transfer_buffer_length - offset;
}
}
}
@@ -1290,28 +1330,31 @@ void musb_host_tx(struct musb *musb, u8 epnum)
urb->status = status;
urb->actual_length = qh->offset;
musb_advance_schedule(musb, urb, hw_ep, USB_DIR_OUT);
+ return;
+ } else if (usb_pipeisoc(pipe) && dma) {
+ if (musb_tx_dma_program(musb->dma_controller, hw_ep, qh, urb,
+ offset, length))
+ return;
+ } else if (tx_csr & MUSB_TXCSR_DMAENAB) {
+ DBG(1, "not complete, but DMA enabled?\n");
+ return;
+ }
- } else if (!(tx_csr & MUSB_TXCSR_DMAENAB)) {
- /* WARN_ON(!buf); */
-
- /* REVISIT: some docs say that when hw_ep->tx_double_buffered,
- * (and presumably, fifo is not half-full) we should write TWO
- * packets before updating TXCSR ... other docs disagree ...
- */
- /* PIO: start next packet in this URB */
- if (wLength > qh->maxpacket)
- wLength = qh->maxpacket;
- musb_write_fifo(hw_ep, wLength, buf);
- qh->segsize = wLength;
-
- musb_ep_select(mbase, epnum);
- musb_writew(epio, MUSB_TXCSR,
- MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
- } else
- DBG(1, "not complete, but dma enabled?\n");
+ /*
+ * PIO: start next packet in this URB.
+ *
+ * REVISIT: some docs say that when hw_ep->tx_double_buffered,
+ * (and presumably, FIFO is not half-full) we should write *two*
+ * packets before updating TXCSR; other docs disagree...
+ */
+ if (length > qh->maxpacket)
+ length = qh->maxpacket;
+ musb_write_fifo(hw_ep, length, urb->transfer_buffer + offset);
+ qh->segsize = length;
-finish:
- return;
+ musb_ep_select(mbase, epnum);
+ musb_writew(epio, MUSB_TXCSR,
+ MUSB_TXCSR_H_WZC_BITS | MUSB_TXCSR_TXPKTRDY);
}
@@ -1841,7 +1884,7 @@ static int musb_urb_enqueue(
unsigned long flags;
struct musb *musb = hcd_to_musb(hcd);
struct usb_host_endpoint *hep = urb->ep;
- struct musb_qh *qh = hep->hcpriv;
+ struct musb_qh *qh;
struct usb_endpoint_descriptor *epd = &hep->desc;
int ret;
unsigned type_reg;
@@ -1853,22 +1896,21 @@ static int musb_urb_enqueue(
spin_lock_irqsave(&musb->lock, flags);
ret = usb_hcd_link_urb_to_ep(hcd, urb);
+ qh = ret ? NULL : hep->hcpriv;
+ if (qh)
+ urb->hcpriv = qh;
spin_unlock_irqrestore(&musb->lock, flags);
- if (ret)
- return ret;
/* DMA mapping was already done, if needed, and this urb is on
- * hep->urb_list ... so there's little to do unless hep wasn't
- * yet scheduled onto a live qh.
+ * hep->urb_list now ... so we're done, unless hep wasn't yet
+ * scheduled onto a live qh.
*
* REVISIT best to keep hep->hcpriv valid until the endpoint gets
* disabled, testing for empty qh->ring and avoiding qh setup costs
* except for the first urb queued after a config change.
*/
- if (qh) {
- urb->hcpriv = qh;
- return 0;
- }
+ if (qh || ret)
+ return ret;
/* Allocate and initialize qh, minimizing the work done each time
* hw_ep gets reprogrammed, or with irqs blocked. Then schedule it.
@@ -2044,7 +2086,7 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in)
* endpoint's irq status here to avoid bogus irqs.
* clearing that status is platform-specific...
*/
- } else {
+ } else if (ep->epnum) {
musb_h_tx_flush_fifo(ep);
csr = musb_readw(epio, MUSB_TXCSR);
csr &= ~(MUSB_TXCSR_AUTOSET
@@ -2058,6 +2100,8 @@ static int musb_cleanup_urb(struct urb *urb, struct musb_qh *qh, int is_in)
musb_writew(epio, MUSB_TXCSR, csr);
/* flush cpu writebuffer */
csr = musb_readw(epio, MUSB_TXCSR);
+ } else {
+ musb_h_ep0_flush_fifo(ep);
}
if (status == 0)
musb_advance_schedule(ep->musb, urb, ep, is_in);
diff --git a/drivers/usb/musb/musbhsdma.c b/drivers/usb/musb/musbhsdma.c
index 8662e9e159c..5e83f96d6b7 100644
--- a/drivers/usb/musb/musbhsdma.c
+++ b/drivers/usb/musb/musbhsdma.c
@@ -195,30 +195,32 @@ static int dma_channel_abort(struct dma_channel *channel)
void __iomem *mbase = musb_channel->controller->base;
u8 bchannel = musb_channel->idx;
+ int offset;
u16 csr;
if (channel->status == MUSB_DMA_STATUS_BUSY) {
if (musb_channel->transmit) {
-
- csr = musb_readw(mbase,
- MUSB_EP_OFFSET(musb_channel->epnum,
- MUSB_TXCSR));
- csr &= ~(MUSB_TXCSR_AUTOSET |
- MUSB_TXCSR_DMAENAB |
- MUSB_TXCSR_DMAMODE);
- musb_writew(mbase,
- MUSB_EP_OFFSET(musb_channel->epnum, MUSB_TXCSR),
- csr);
+ offset = MUSB_EP_OFFSET(musb_channel->epnum,
+ MUSB_TXCSR);
+
+ /*
+ * The programming guide says that we must clear
+ * the DMAENAB bit before the DMAMODE bit...
+ */
+ csr = musb_readw(mbase, offset);
+ csr &= ~(MUSB_TXCSR_AUTOSET | MUSB_TXCSR_DMAENAB);
+ musb_writew(mbase, offset, csr);
+ csr &= ~MUSB_TXCSR_DMAMODE;
+ musb_writew(mbase, offset, csr);
} else {
- csr = musb_readw(mbase,
- MUSB_EP_OFFSET(musb_channel->epnum,
- MUSB_RXCSR));
+ offset = MUSB_EP_OFFSET(musb_channel->epnum,
+ MUSB_RXCSR);
+
+ csr = musb_readw(mbase, offset);
csr &= ~(MUSB_RXCSR_AUTOCLEAR |
MUSB_RXCSR_DMAENAB |
MUSB_RXCSR_DMAMODE);
- musb_writew(mbase,
- MUSB_EP_OFFSET(musb_channel->epnum, MUSB_RXCSR),
- csr);
+ musb_writew(mbase, offset, csr);
}
musb_writew(mbase,
@@ -296,20 +298,28 @@ static irqreturn_t dma_controller_irq(int irq, void *private_data)
&& ((channel->desired_mode == 0)
|| (channel->actual_len &
(musb_channel->max_packet_sz - 1)))
- ) {
+ ) {
+ u8 epnum = musb_channel->epnum;
+ int offset = MUSB_EP_OFFSET(epnum,
+ MUSB_TXCSR);
+ u16 txcsr;
+
+ /*
+ * The programming guide says that we
+ * must clear DMAENAB before DMAMODE.
+ */
+ musb_ep_select(mbase, epnum);
+ txcsr = musb_readw(mbase, offset);
+ txcsr &= ~(MUSB_TXCSR_DMAENAB
+ | MUSB_TXCSR_AUTOSET);
+ musb_writew(mbase, offset, txcsr);
/* Send out the packet */
- musb_ep_select(mbase,
- musb_channel->epnum);
- musb_writew(mbase, MUSB_EP_OFFSET(
- musb_channel->epnum,
- MUSB_TXCSR),
- MUSB_TXCSR_TXPKTRDY);
- } else {
- musb_dma_completion(
- musb,
- musb_channel->epnum,
- musb_channel->transmit);
+ txcsr &= ~MUSB_TXCSR_DMAMODE;
+ txcsr |= MUSB_TXCSR_TXPKTRDY;
+ musb_writew(mbase, offset, txcsr);
}
+ musb_dma_completion(musb, musb_channel->epnum,
+ musb_channel->transmit);
}
}
}
diff --git a/drivers/usb/serial/ftdi_sio.c b/drivers/usb/serial/ftdi_sio.c
index dcc87aaa862..8100f1d2590 100644
--- a/drivers/usb/serial/ftdi_sio.c
+++ b/drivers/usb/serial/ftdi_sio.c
@@ -668,6 +668,7 @@ static struct usb_device_id id_table_combined [] = {
{ USB_DEVICE(DE_VID, WHT_PID) },
{ USB_DEVICE(ADI_VID, ADI_GNICE_PID),
.driver_info = (kernel_ulong_t)&ftdi_jtag_quirk },
+ { USB_DEVICE(JETI_VID, JETI_SPC1201_PID) },
{ }, /* Optional parameter entry */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/ftdi_sio.h b/drivers/usb/serial/ftdi_sio.h
index daaf63db0b5..c09f658a448 100644
--- a/drivers/usb/serial/ftdi_sio.h
+++ b/drivers/usb/serial/ftdi_sio.h
@@ -913,6 +913,13 @@
#define ADI_GNICE_PID 0xF000
/*
+ * JETI SPECTROMETER SPECBOS 1201
+ * http://www.jeti.com/products/sys/scb/scb1201.php
+ */
+#define JETI_VID 0x0c6c
+#define JETI_SPC1201_PID 0x04b2
+
+/*
* BmRequestType: 1100 0000b
* bRequest: FTDI_E2_READ
* wValue: 0
diff --git a/drivers/usb/serial/moto_modem.c b/drivers/usb/serial/moto_modem.c
index 2e8e05462ef..b66b71ccd12 100644
--- a/drivers/usb/serial/moto_modem.c
+++ b/drivers/usb/serial/moto_modem.c
@@ -25,6 +25,7 @@ static struct usb_device_id id_table [] = {
{ USB_DEVICE(0x05c6, 0x3197) }, /* unknown Motorola phone */
{ USB_DEVICE(0x0c44, 0x0022) }, /* unknown Mororola phone */
{ USB_DEVICE(0x22b8, 0x2a64) }, /* Motorola KRZR K1m */
+ { USB_DEVICE(0x22b8, 0x2c64) }, /* Motorola V950 phone */
{ },
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/serial/option.c b/drivers/usb/serial/option.c
index d560c0b54e6..47bd070f24b 100644
--- a/drivers/usb/serial/option.c
+++ b/drivers/usb/serial/option.c
@@ -300,6 +300,10 @@ static int option_resume(struct usb_serial *serial);
#define BENQ_VENDOR_ID 0x04a5
#define BENQ_PRODUCT_H10 0x4068
+#define DLINK_VENDOR_ID 0x1186
+#define DLINK_PRODUCT_DWM_652 0x3e04
+
+
static struct usb_device_id option_ids[] = {
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_COLT) },
{ USB_DEVICE(OPTION_VENDOR_ID, OPTION_PRODUCT_RICOLA) },
@@ -516,6 +520,7 @@ static struct usb_device_id option_ids[] = {
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_MF628) },
{ USB_DEVICE(ZTE_VENDOR_ID, ZTE_PRODUCT_CDMA_TECH) },
{ USB_DEVICE(BENQ_VENDOR_ID, BENQ_PRODUCT_H10) },
+ { USB_DEVICE(DLINK_VENDOR_ID, DLINK_PRODUCT_DWM_652) },
{ USB_DEVICE(0x1da5, 0x4515) }, /* BenQ H20 */
{ } /* Terminating entry */
};
diff --git a/drivers/usb/serial/qcserial.c b/drivers/usb/serial/qcserial.c
index e6d6b0c17fd..7528b8d57f1 100644
--- a/drivers/usb/serial/qcserial.c
+++ b/drivers/usb/serial/qcserial.c
@@ -26,6 +26,27 @@ static struct usb_device_id id_table[] = {
{USB_DEVICE(0x05c6, 0x9212)}, /* Acer Gobi Modem Device */
{USB_DEVICE(0x03f0, 0x1f1d)}, /* HP un2400 Gobi Modem Device */
{USB_DEVICE(0x03f0, 0x201d)}, /* HP un2400 Gobi QDL Device */
+ {USB_DEVICE(0x04da, 0x250d)}, /* Panasonic Gobi Modem device */
+ {USB_DEVICE(0x04da, 0x250c)}, /* Panasonic Gobi QDL device */
+ {USB_DEVICE(0x413c, 0x8172)}, /* Dell Gobi Modem device */
+ {USB_DEVICE(0x413c, 0x8171)}, /* Dell Gobi QDL device */
+ {USB_DEVICE(0x1410, 0xa001)}, /* Novatel Gobi Modem device */
+ {USB_DEVICE(0x1410, 0xa008)}, /* Novatel Gobi QDL device */
+ {USB_DEVICE(0x0b05, 0x1776)}, /* Asus Gobi Modem device */
+ {USB_DEVICE(0x0b05, 0x1774)}, /* Asus Gobi QDL device */
+ {USB_DEVICE(0x19d2, 0xfff3)}, /* ONDA Gobi Modem device */
+ {USB_DEVICE(0x19d2, 0xfff2)}, /* ONDA Gobi QDL device */
+ {USB_DEVICE(0x1557, 0x0a80)}, /* OQO Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9001)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9002)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9202)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9203)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9222)}, /* Generic Gobi Modem device */
+ {USB_DEVICE(0x05c6, 0x9008)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9201)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9221)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x05c6, 0x9231)}, /* Generic Gobi QDL device */
+ {USB_DEVICE(0x1f45, 0x0001)}, /* Unknown Gobi QDL device */
{ } /* Terminating entry */
};
MODULE_DEVICE_TABLE(usb, id_table);
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index 5be54c01966..ef7e5a8ceab 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -17,7 +17,8 @@ usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \
ifeq ($(CONFIG_USB_LIBUSUAL),)
usb-storage-objs += usual-tables.o
else
- obj-$(CONFIG_USB) += libusual.o usual-tables.o
+ obj-$(CONFIG_USB) += usb-libusual.o
+ usb-libusual-objs := libusual.o usual-tables.o
endif
obj-$(CONFIG_USB_STORAGE_ALAUDA) += ums-alauda.o
diff --git a/drivers/usb/storage/transport.c b/drivers/usb/storage/transport.c
index 49aedb36dc1..fcb32021721 100644
--- a/drivers/usb/storage/transport.c
+++ b/drivers/usb/storage/transport.c
@@ -247,10 +247,8 @@ int usb_stor_clear_halt(struct us_data *us, unsigned int pipe)
USB_ENDPOINT_HALT, endp,
NULL, 0, 3*HZ);
- /* reset the endpoint toggle */
if (result >= 0)
- usb_settoggle(us->pusb_dev, usb_pipeendpoint(pipe),
- usb_pipeout(pipe), 0);
+ usb_reset_endpoint(us->pusb_dev, endp);
US_DEBUGP("%s: result = %d\n", __func__, result);
return result;
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index 1c1f643e8a7..96db479d116 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -975,12 +975,14 @@ UNUSUAL_DEV( 0x07c4, 0xa400, 0x0000, 0xffff,
US_SC_DEVICE, US_PR_DEVICE, NULL,
US_FL_FIX_INQUIRY | US_FL_FIX_CAPACITY ),
-/* Reported by Rauch Wolke <rauchwolke@gmx.net> */
+/* Reported by Rauch Wolke <rauchwolke@gmx.net>
+ * and augmented by binbin <binbinsh@gmail.com> (Bugzilla #12882)
+ */
UNUSUAL_DEV( 0x07c4, 0xa4a5, 0x0000, 0xffff,
"Simple Tech/Datafab",
"CF+SM Reader",
US_SC_DEVICE, US_PR_DEVICE, NULL,
- US_FL_IGNORE_RESIDUE ),
+ US_FL_IGNORE_RESIDUE | US_FL_MAX_SECTORS_64 ),
/* Casio QV 2x00/3x00/4000/8000 digital still cameras are not conformant
* to the USB storage specification in two ways:
@@ -1376,6 +1378,14 @@ UNUSUAL_DEV( 0x10d6, 0x2200, 0x0100, 0x0100,
US_SC_DEVICE, US_PR_DEVICE, NULL,
0),
+/* Reported by Pascal Terjan <pterjan@mandriva.com>
+ * Ignore driver CD mode and force into modem mode by default.
+ */
+UNUSUAL_DEV( 0x1186, 0x3e04, 0x0000, 0x0000,
+ "D-Link",
+ "USB Mass Storage",
+ US_SC_DEVICE, US_PR_DEVICE, option_ms_init, 0),
+
/* Reported by Kevin Lloyd <linux@sierrawireless.com>
* Entry is needed for the initializer function override,
* which instructs the device to load as a modem
diff --git a/drivers/usb/wusbcore/devconnect.c b/drivers/usb/wusbcore/devconnect.c
index 386eaa22d21..4ac4300a3f9 100644
--- a/drivers/usb/wusbcore/devconnect.c
+++ b/drivers/usb/wusbcore/devconnect.c
@@ -267,6 +267,8 @@ static void wusbhc_devconnect_acked_work(struct work_struct *work)
mutex_lock(&wusbhc->mutex);
wusbhc_devconnect_acked(wusbhc, wusb_dev);
mutex_unlock(&wusbhc->mutex);
+
+ wusb_dev_put(wusb_dev);
}
/*
@@ -396,7 +398,8 @@ static void __wusbhc_dev_disconnect(struct wusbhc *wusbhc,
/* After a device disconnects, change the GTK (see [WUSB]
* section 6.2.11.2). */
- wusbhc_gtk_rekey(wusbhc);
+ if (wusbhc->active)
+ wusbhc_gtk_rekey(wusbhc);
/* The Wireless USB part has forgotten about the device already; now
* khubd's timer will pick up the disconnection and remove the USB
@@ -1084,15 +1087,21 @@ error_mmcie_set:
* wusbhc_devconnect_stop - stop managing connected devices
* @wusbhc: the WUSB HC
*
- * Removes the Host Info IE and stops the keep alives.
- *
- * FIXME: should this disconnect all devices?
+ * Disconnects any devices still connected, stops the keep alives and
+ * removes the Host Info IE.
*/
void wusbhc_devconnect_stop(struct wusbhc *wusbhc)
{
- cancel_delayed_work_sync(&wusbhc->keep_alive_timer);
- WARN_ON(!list_empty(&wusbhc->cack_list));
+ int i;
+ mutex_lock(&wusbhc->mutex);
+ for (i = 0; i < wusbhc->ports_max; i++) {
+ if (wusbhc->port[i].wusb_dev)
+ __wusbhc_dev_disconnect(wusbhc, &wusbhc->port[i]);
+ }
+ mutex_unlock(&wusbhc->mutex);
+
+ cancel_delayed_work_sync(&wusbhc->keep_alive_timer);
wusbhc_mmcie_rm(wusbhc, &wusbhc->wuie_host_info->hdr);
kfree(wusbhc->wuie_host_info);
wusbhc->wuie_host_info = NULL;
diff --git a/drivers/usb/wusbcore/wusbhc.c b/drivers/usb/wusbcore/wusbhc.c
index 07c63a31c79..ee6256f2363 100644
--- a/drivers/usb/wusbcore/wusbhc.c
+++ b/drivers/usb/wusbcore/wusbhc.c
@@ -88,33 +88,31 @@ static DEVICE_ATTR(wusb_trust_timeout, 0644, wusb_trust_timeout_show,
wusb_trust_timeout_store);
/*
- * Show & store the current WUSB CHID
+ * Show the current WUSB CHID.
*/
static ssize_t wusb_chid_show(struct device *dev,
struct device_attribute *attr, char *buf)
{
struct wusbhc *wusbhc = usbhc_dev_to_wusbhc(dev);
+ const struct wusb_ckhdid *chid;
ssize_t result = 0;
if (wusbhc->wuie_host_info != NULL)
- result += ckhdid_printf(buf, PAGE_SIZE,
- &wusbhc->wuie_host_info->CHID);
+ chid = &wusbhc->wuie_host_info->CHID;
+ else
+ chid = &wusb_ckhdid_zero;
+
+ result += ckhdid_printf(buf, PAGE_SIZE, chid);
+ result += sprintf(buf + result, "\n");
+
return result;
}
/*
- * Store a new CHID
- *
- * This will (FIXME) trigger many changes.
- *
- * - Send an all zeros CHID and it will stop the controller
- * - Send a non-zero CHID and it will start it
- * (unless it was started, it will just change the CHID,
- * diconnecting all devices first).
+ * Store a new CHID.
*
- * So first we scan the MMC we are sent and then we act on it. We
- * read it in the same format as we print it, an ASCII string of 16
- * hex bytes.
+ * - Write an all zeros CHID and it will stop the controller
+ * - Write a non-zero CHID and it will start it.
*
* See wusbhc_chid_set() for more info.
*/
@@ -339,13 +337,15 @@ void wusbhc_giveback_urb(struct wusbhc *wusbhc, struct urb *urb, int status)
{
struct wusb_dev *wusb_dev = __wusb_dev_get_by_usb_dev(wusbhc, urb->dev);
- if (status == 0) {
+ if (status == 0 && wusb_dev) {
wusb_dev->entry_ts = jiffies;
- /* wusbhc_devconnect_acked() can't be called from from
+ /* wusbhc_devconnect_acked() can't be called from
atomic context so defer it to a work queue. */
if (!list_empty(&wusb_dev->cack_node))
queue_work(wusbd, &wusb_dev->devconnect_acked_work);
+ else
+ wusb_dev_put(wusb_dev);
}
usb_hcd_giveback_urb(&wusbhc->usb_hcd, urb, status);
diff --git a/include/linux/usb.h b/include/linux/usb.h
index c6b2ab41b90..3aa2cd1f8d0 100644
--- a/include/linux/usb.h
+++ b/include/linux/usb.h
@@ -1387,6 +1387,7 @@ extern int usb_string(struct usb_device *dev, int index,
extern int usb_clear_halt(struct usb_device *dev, int pipe);
extern int usb_reset_configuration(struct usb_device *dev);
extern int usb_set_interface(struct usb_device *dev, int ifnum, int alternate);
+extern void usb_reset_endpoint(struct usb_device *dev, unsigned int epaddr);
/* this request isn't really synchronous, but it belongs with the others */
extern int usb_driver_set_configuration(struct usb_device *udev, int config);
@@ -1491,14 +1492,6 @@ void usb_sg_wait(struct usb_sg_request *io);
#define usb_pipecontrol(pipe) (usb_pipetype((pipe)) == PIPE_CONTROL)
#define usb_pipebulk(pipe) (usb_pipetype((pipe)) == PIPE_BULK)
-/* The D0/D1 toggle bits ... USE WITH CAUTION (they're almost hcd-internal) */
-#define usb_gettoggle(dev, ep, out) (((dev)->toggle[out] >> (ep)) & 1)
-#define usb_dotoggle(dev, ep, out) ((dev)->toggle[out] ^= (1 << (ep)))
-#define usb_settoggle(dev, ep, out, bit) \
- ((dev)->toggle[out] = ((dev)->toggle[out] & ~(1 << (ep))) | \
- ((bit) << (ep)))
-
-
static inline unsigned int __create_pipe(struct usb_device *dev,
unsigned int endpoint)
{