aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--drivers/usb/storage/Kconfig9
-rw-r--r--drivers/usb/storage/Makefile1
-rw-r--r--drivers/usb/storage/alauda.c1119
-rw-r--r--drivers/usb/storage/alauda.h100
-rw-r--r--drivers/usb/storage/unusual_devs.h14
-rw-r--r--drivers/usb/storage/usb.c12
-rw-r--r--include/linux/usb_usual.h3
7 files changed, 1258 insertions, 0 deletions
diff --git a/drivers/usb/storage/Kconfig b/drivers/usb/storage/Kconfig
index bdfcb95d9c1..92be101feba 100644
--- a/drivers/usb/storage/Kconfig
+++ b/drivers/usb/storage/Kconfig
@@ -112,6 +112,15 @@ config USB_STORAGE_JUMPSHOT
Say Y here to include additional code to support the Lexar Jumpshot
USB CompactFlash reader.
+config USB_STORAGE_ALAUDA
+ bool "Olympus MAUSB-10/Fuji DPC-R1 support (EXPERIMENTAL)"
+ depends on USB_STORAGE && EXPERIMENTAL
+ help
+ Say Y here to include additional code to support the Olympus MAUSB-10
+ and Fujifilm DPC-R1 USB Card reader/writer devices.
+
+ These devices are based on the Alauda chip and support support both
+ XD and SmartMedia cards.
config USB_STORAGE_ONETOUCH
bool "Support OneTouch Button on Maxtor Hard Drives (EXPERIMENTAL)"
diff --git a/drivers/usb/storage/Makefile b/drivers/usb/storage/Makefile
index 2d416e9028b..8cbba22508a 100644
--- a/drivers/usb/storage/Makefile
+++ b/drivers/usb/storage/Makefile
@@ -18,6 +18,7 @@ usb-storage-obj-$(CONFIG_USB_STORAGE_DPCM) += dpcm.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ISD200) += isd200.o
usb-storage-obj-$(CONFIG_USB_STORAGE_DATAFAB) += datafab.o
usb-storage-obj-$(CONFIG_USB_STORAGE_JUMPSHOT) += jumpshot.o
+usb-storage-obj-$(CONFIG_USB_STORAGE_ALAUDA) += alauda.o
usb-storage-obj-$(CONFIG_USB_STORAGE_ONETOUCH) += onetouch.o
usb-storage-objs := scsiglue.o protocol.o transport.o usb.o \
diff --git a/drivers/usb/storage/alauda.c b/drivers/usb/storage/alauda.c
new file mode 100644
index 00000000000..4d3cbb12b71
--- /dev/null
+++ b/drivers/usb/storage/alauda.c
@@ -0,0 +1,1119 @@
+/*
+ * Driver for Alauda-based card readers
+ *
+ * Current development and maintenance by:
+ * (c) 2005 Daniel Drake <dsd@gentoo.org>
+ *
+ * The 'Alauda' is a chip manufacturered by RATOC for OEM use.
+ *
+ * Alauda implements a vendor-specific command set to access two media reader
+ * ports (XD, SmartMedia). This driver converts SCSI commands to the commands
+ * which are accepted by these devices.
+ *
+ * The driver was developed through reverse-engineering, with the help of the
+ * sddr09 driver which has many similarities, and with some help from the
+ * (very old) vendor-supplied GPL sma03 driver.
+ *
+ * For protocol info, see http://alauda.sourceforge.net
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#include <scsi/scsi.h>
+#include <scsi/scsi_cmnd.h>
+#include <scsi/scsi_device.h>
+
+#include "usb.h"
+#include "transport.h"
+#include "protocol.h"
+#include "debug.h"
+#include "alauda.h"
+
+#define short_pack(lsb,msb) ( ((u16)(lsb)) | ( ((u16)(msb))<<8 ) )
+#define LSB_of(s) ((s)&0xFF)
+#define MSB_of(s) ((s)>>8)
+
+#define MEDIA_PORT(us) us->srb->device->lun
+#define MEDIA_INFO(us) ((struct alauda_info *)us->extra)->port[MEDIA_PORT(us)]
+
+#define PBA_LO(pba) ((pba & 0xF) << 5)
+#define PBA_HI(pba) (pba >> 3)
+#define PBA_ZONE(pba) (pba >> 11)
+
+/*
+ * Media handling
+ */
+
+struct alauda_card_info {
+ unsigned char id; /* id byte */
+ unsigned char chipshift; /* 1<<cs bytes total capacity */
+ unsigned char pageshift; /* 1<<ps bytes in a page */
+ unsigned char blockshift; /* 1<<bs pages per block */
+ unsigned char zoneshift; /* 1<<zs blocks per zone */
+};
+
+static struct alauda_card_info alauda_card_ids[] = {
+ /* NAND flash */
+ { 0x6e, 20, 8, 4, 8}, /* 1 MB */
+ { 0xe8, 20, 8, 4, 8}, /* 1 MB */
+ { 0xec, 20, 8, 4, 8}, /* 1 MB */
+ { 0x64, 21, 8, 4, 9}, /* 2 MB */
+ { 0xea, 21, 8, 4, 9}, /* 2 MB */
+ { 0x6b, 22, 9, 4, 9}, /* 4 MB */
+ { 0xe3, 22, 9, 4, 9}, /* 4 MB */
+ { 0xe5, 22, 9, 4, 9}, /* 4 MB */
+ { 0xe6, 23, 9, 4, 10}, /* 8 MB */
+ { 0x73, 24, 9, 5, 10}, /* 16 MB */
+ { 0x75, 25, 9, 5, 10}, /* 32 MB */
+ { 0x76, 26, 9, 5, 10}, /* 64 MB */
+ { 0x79, 27, 9, 5, 10}, /* 128 MB */
+ { 0x71, 28, 9, 5, 10}, /* 256 MB */
+
+ /* MASK ROM */
+ { 0x5d, 21, 9, 4, 8}, /* 2 MB */
+ { 0xd5, 22, 9, 4, 9}, /* 4 MB */
+ { 0xd6, 23, 9, 4, 10}, /* 8 MB */
+ { 0x57, 24, 9, 4, 11}, /* 16 MB */
+ { 0x58, 25, 9, 4, 12}, /* 32 MB */
+ { 0,}
+};
+
+static struct alauda_card_info *alauda_card_find_id(unsigned char id) {
+ int i;
+
+ for (i = 0; alauda_card_ids[i].id != 0; i++)
+ if (alauda_card_ids[i].id == id)
+ return &(alauda_card_ids[i]);
+ return NULL;
+}
+
+/*
+ * ECC computation.
+ */
+
+static unsigned char parity[256];
+static unsigned char ecc2[256];
+
+static void nand_init_ecc(void) {
+ int i, j, a;
+
+ parity[0] = 0;
+ for (i = 1; i < 256; i++)
+ parity[i] = (parity[i&(i-1)] ^ 1);
+
+ for (i = 0; i < 256; i++) {
+ a = 0;
+ for (j = 0; j < 8; j++) {
+ if (i & (1<<j)) {
+ if ((j & 1) == 0)
+ a ^= 0x04;
+ if ((j & 2) == 0)
+ a ^= 0x10;
+ if ((j & 4) == 0)
+ a ^= 0x40;
+ }
+ }
+ ecc2[i] = ~(a ^ (a<<1) ^ (parity[i] ? 0xa8 : 0));
+ }
+}
+
+/* compute 3-byte ecc on 256 bytes */
+static void nand_compute_ecc(unsigned char *data, unsigned char *ecc) {
+ int i, j, a;
+ unsigned char par, bit, bits[8];
+
+ par = 0;
+ for (j = 0; j < 8; j++)
+ bits[j] = 0;
+
+ /* collect 16 checksum bits */
+ for (i = 0; i < 256; i++) {
+ par ^= data[i];
+ bit = parity[data[i]];
+ for (j = 0; j < 8; j++)
+ if ((i & (1<<j)) == 0)
+ bits[j] ^= bit;
+ }
+
+ /* put 4+4+4 = 12 bits in the ecc */
+ a = (bits[3] << 6) + (bits[2] << 4) + (bits[1] << 2) + bits[0];
+ ecc[0] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
+
+ a = (bits[7] << 6) + (bits[6] << 4) + (bits[5] << 2) + bits[4];
+ ecc[1] = ~(a ^ (a<<1) ^ (parity[par] ? 0xaa : 0));
+
+ ecc[2] = ecc2[par];
+}
+
+static int nand_compare_ecc(unsigned char *data, unsigned char *ecc) {
+ return (data[0] == ecc[0] && data[1] == ecc[1] && data[2] == ecc[2]);
+}
+
+static void nand_store_ecc(unsigned char *data, unsigned char *ecc) {
+ memcpy(data, ecc, 3);
+}
+
+/*
+ * Alauda driver
+ */
+
+/*
+ * Forget our PBA <---> LBA mappings for a particular port
+ */
+static void alauda_free_maps (struct alauda_media_info *media_info)
+{
+ unsigned int shift = media_info->zoneshift
+ + media_info->blockshift + media_info->pageshift;
+ unsigned int num_zones = media_info->capacity >> shift;
+ unsigned int i;
+
+ if (media_info->lba_to_pba != NULL)
+ for (i = 0; i < num_zones; i++) {
+ kfree(media_info->lba_to_pba[i]);
+ media_info->lba_to_pba[i] = NULL;
+ }
+
+ if (media_info->pba_to_lba != NULL)
+ for (i = 0; i < num_zones; i++) {
+ kfree(media_info->pba_to_lba[i]);
+ media_info->pba_to_lba[i] = NULL;
+ }
+}
+
+/*
+ * Returns 2 bytes of status data
+ * The first byte describes media status, and second byte describes door status
+ */
+static int alauda_get_media_status(struct us_data *us, unsigned char *data)
+{
+ int rc;
+ unsigned char command;
+
+ if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
+ command = ALAUDA_GET_XD_MEDIA_STATUS;
+ else
+ command = ALAUDA_GET_SM_MEDIA_STATUS;
+
+ rc = usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
+ command, 0xc0, 0, 1, data, 2);
+
+ US_DEBUGP("alauda_get_media_status: Media status %02X %02X\n",
+ data[0], data[1]);
+
+ return rc;
+}
+
+/*
+ * Clears the "media was changed" bit so that we know when it changes again
+ * in the future.
+ */
+static int alauda_ack_media(struct us_data *us)
+{
+ unsigned char command;
+
+ if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
+ command = ALAUDA_ACK_XD_MEDIA_CHANGE;
+ else
+ command = ALAUDA_ACK_SM_MEDIA_CHANGE;
+
+ return usb_stor_ctrl_transfer(us, us->send_ctrl_pipe,
+ command, 0x40, 0, 1, NULL, 0);
+}
+
+/*
+ * Retrieves a 4-byte media signature, which indicates manufacturer, capacity,
+ * and some other details.
+ */
+static int alauda_get_media_signature(struct us_data *us, unsigned char *data)
+{
+ unsigned char command;
+
+ if (MEDIA_PORT(us) == ALAUDA_PORT_XD)
+ command = ALAUDA_GET_XD_MEDIA_SIG;
+ else
+ command = ALAUDA_GET_SM_MEDIA_SIG;
+
+ return usb_stor_ctrl_transfer(us, us->recv_ctrl_pipe,
+ command, 0xc0, 0, 0, data, 4);
+}
+
+/*
+ * Resets the media status (but not the whole device?)
+ */
+static int alauda_reset_media(struct us_data *us)
+{
+ unsigned char *command = us->iobuf;
+
+ memset(command, 0, 9);
+ command[0] = ALAUDA_BULK_CMD;
+ command[1] = ALAUDA_BULK_RESET_MEDIA;
+ command[8] = MEDIA_PORT(us);
+
+ return usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ command, 9, NULL);
+}
+
+/*
+ * Examines the media and deduces capacity, etc.
+ */
+static int alauda_init_media(struct us_data *us)
+{
+ unsigned char *data = us->iobuf;
+ int ready = 0;
+ struct alauda_card_info *media_info;
+ unsigned int num_zones;
+
+ while (ready == 0) {
+ msleep(20);
+
+ if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (data[0] & 0x10)
+ ready = 1;
+ }
+
+ US_DEBUGP("alauda_init_media: We are ready for action!\n");
+
+ if (alauda_ack_media(us) != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ msleep(10);
+
+ if (alauda_get_media_status(us, data) != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ if (data[0] != 0x14) {
+ US_DEBUGP("alauda_init_media: Media not ready after ack\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ if (alauda_get_media_signature(us, data) != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ US_DEBUGP("alauda_init_media: Media signature: %02X %02X %02X %02X\n",
+ data[0], data[1], data[2], data[3]);
+ media_info = alauda_card_find_id(data[1]);
+ if (media_info == NULL) {
+ printk("alauda_init_media: Unrecognised media signature: "
+ "%02X %02X %02X %02X\n",
+ data[0], data[1], data[2], data[3]);
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ MEDIA_INFO(us).capacity = 1 << media_info->chipshift;
+ US_DEBUGP("Found media with capacity: %ldMB\n",
+ MEDIA_INFO(us).capacity >> 20);
+
+ MEDIA_INFO(us).pageshift = media_info->pageshift;
+ MEDIA_INFO(us).blockshift = media_info->blockshift;
+ MEDIA_INFO(us).zoneshift = media_info->zoneshift;
+
+ MEDIA_INFO(us).pagesize = 1 << media_info->pageshift;
+ MEDIA_INFO(us).blocksize = 1 << media_info->blockshift;
+ MEDIA_INFO(us).zonesize = 1 << media_info->zoneshift;
+
+ MEDIA_INFO(us).uzonesize = ((1 << media_info->zoneshift) / 128) * 125;
+ MEDIA_INFO(us).blockmask = MEDIA_INFO(us).blocksize - 1;
+
+ num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift
+ + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift);
+ MEDIA_INFO(us).pba_to_lba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
+ MEDIA_INFO(us).lba_to_pba = kcalloc(num_zones, sizeof(u16*), GFP_NOIO);
+
+ if (alauda_reset_media(us) != USB_STOR_XFER_GOOD)
+ return USB_STOR_TRANSPORT_ERROR;
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Examines the media status and does the right thing when the media has gone,
+ * appeared, or changed.
+ */
+static int alauda_check_media(struct us_data *us)
+{
+ struct alauda_info *info = (struct alauda_info *) us->extra;
+ unsigned char status[2];
+ int rc;
+
+ rc = alauda_get_media_status(us, status);
+
+ /* Check for no media or door open */
+ if ((status[0] & 0x80) || ((status[0] & 0x1F) == 0x10)
+ || ((status[1] & 0x01) == 0)) {
+ US_DEBUGP("alauda_check_media: No media, or door open\n");
+ alauda_free_maps(&MEDIA_INFO(us));
+ info->sense_key = 0x02;
+ info->sense_asc = 0x3A;
+ info->sense_ascq = 0x00;
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ /* Check for media change */
+ if (status[0] & 0x08) {
+ US_DEBUGP("alauda_check_media: Media change detected\n");
+ alauda_free_maps(&MEDIA_INFO(us));
+ alauda_init_media(us);
+
+ info->sense_key = UNIT_ATTENTION;
+ info->sense_asc = 0x28;
+ info->sense_ascq = 0x00;
+ return USB_STOR_TRANSPORT_FAILED;
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Checks the status from the 2nd status register
+ * Returns 3 bytes of status data, only the first is known
+ */
+static int alauda_check_status2(struct us_data *us)
+{
+ int rc;
+ unsigned char command[] = {
+ ALAUDA_BULK_CMD, ALAUDA_BULK_GET_STATUS2,
+ 0, 0, 0, 0, 3, 0, MEDIA_PORT(us)
+ };
+ unsigned char data[3];
+
+ rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ command, 9, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ data, 3, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ US_DEBUGP("alauda_check_status2: %02X %02X %02X\n", data[0], data[1], data[2]);
+ if (data[0] & ALAUDA_STATUS_ERROR)
+ return USB_STOR_XFER_ERROR;
+
+ return USB_STOR_XFER_GOOD;
+}
+
+/*
+ * Gets the redundancy data for the first page of a PBA
+ * Returns 16 bytes.
+ */
+static int alauda_get_redu_data(struct us_data *us, u16 pba, unsigned char *data)
+{
+ int rc;
+ unsigned char command[] = {
+ ALAUDA_BULK_CMD, ALAUDA_BULK_GET_REDU_DATA,
+ PBA_HI(pba), PBA_ZONE(pba), 0, PBA_LO(pba), 0, 0, MEDIA_PORT(us)
+ };
+
+ rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ command, 9, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ data, 16, NULL);
+}
+
+/*
+ * Finds the first unused PBA in a zone
+ * Returns the absolute PBA of an unused PBA, or 0 if none found.
+ */
+static u16 alauda_find_unused_pba(struct alauda_media_info *info,
+ unsigned int zone)
+{
+ u16 *pba_to_lba = info->pba_to_lba[zone];
+ unsigned int i;
+
+ for (i = 0; i < info->zonesize; i++)
+ if (pba_to_lba[i] == UNDEF)
+ return (zone << info->zoneshift) + i;
+
+ return 0;
+}
+
+/*
+ * Reads the redundancy data for all PBA's in a zone
+ * Produces lba <--> pba mappings
+ */
+static int alauda_read_map(struct us_data *us, unsigned int zone)
+{
+ unsigned char *data = us->iobuf;
+ int result;
+ int i, j;
+ unsigned int zonesize = MEDIA_INFO(us).zonesize;
+ unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
+ unsigned int lba_offset, lba_real, blocknum;
+ unsigned int zone_base_lba = zone * uzonesize;
+ unsigned int zone_base_pba = zone * zonesize;
+ u16 *lba_to_pba = kcalloc(zonesize, sizeof(u16), GFP_NOIO);
+ u16 *pba_to_lba = kcalloc(zonesize, sizeof(u16), GFP_NOIO);
+ if (lba_to_pba == NULL || pba_to_lba == NULL) {
+ result = USB_STOR_TRANSPORT_ERROR;
+ goto error;
+ }
+
+ US_DEBUGP("alauda_read_map: Mapping blocks for zone %d\n", zone);
+
+ /* 1024 PBA's per zone */
+ for (i = 0; i < zonesize; i++)
+ lba_to_pba[i] = pba_to_lba[i] = UNDEF;
+
+ for (i = 0; i < zonesize; i++) {
+ blocknum = zone_base_pba + i;
+
+ result = alauda_get_redu_data(us, blocknum, data);
+ if (result != USB_STOR_XFER_GOOD) {
+ result = USB_STOR_TRANSPORT_ERROR;
+ goto error;
+ }
+
+ /* special PBAs have control field 0^16 */
+ for (j = 0; j < 16; j++)
+ if (data[j] != 0)
+ goto nonz;
+ pba_to_lba[i] = UNUSABLE;
+ US_DEBUGP("alauda_read_map: PBA %d has no logical mapping\n", blocknum);
+ continue;
+
+ nonz:
+ /* unwritten PBAs have control field FF^16 */
+ for (j = 0; j < 16; j++)
+ if (data[j] != 0xff)
+ goto nonff;
+ continue;
+
+ nonff:
+ /* normal PBAs start with six FFs */
+ if (j < 6) {
+ US_DEBUGP("alauda_read_map: PBA %d has no logical mapping: "
+ "reserved area = %02X%02X%02X%02X "
+ "data status %02X block status %02X\n",
+ blocknum, data[0], data[1], data[2], data[3],
+ data[4], data[5]);
+ pba_to_lba[i] = UNUSABLE;
+ continue;
+ }
+
+ if ((data[6] >> 4) != 0x01) {
+ US_DEBUGP("alauda_read_map: PBA %d has invalid address "
+ "field %02X%02X/%02X%02X\n",
+ blocknum, data[6], data[7], data[11], data[12]);
+ pba_to_lba[i] = UNUSABLE;
+ continue;
+ }
+
+ /* check even parity */
+ if (parity[data[6] ^ data[7]]) {
+ printk("alauda_read_map: Bad parity in LBA for block %d"
+ " (%02X %02X)\n", i, data[6], data[7]);
+ pba_to_lba[i] = UNUSABLE;
+ continue;
+ }
+
+ lba_offset = short_pack(data[7], data[6]);
+ lba_offset = (lba_offset & 0x07FF) >> 1;
+ lba_real = lba_offset + zone_base_lba;
+
+ /*
+ * Every 1024 physical blocks ("zone"), the LBA numbers
+ * go back to zero, but are within a higher block of LBA's.
+ * Also, there is a maximum of 1000 LBA's per zone.
+ * In other words, in PBA 1024-2047 you will find LBA 0-999
+ * which are really LBA 1000-1999. This allows for 24 bad
+ * or special physical blocks per zone.
+ */
+
+ if (lba_offset >= uzonesize) {
+ printk("alauda_read_map: Bad low LBA %d for block %d\n",
+ lba_real, blocknum);
+ continue;
+ }
+
+ if (lba_to_pba[lba_offset] != UNDEF) {
+ printk("alauda_read_map: LBA %d seen for PBA %d and %d\n",
+ lba_real, lba_to_pba[lba_offset], blocknum);
+ continue;
+ }
+
+ pba_to_lba[i] = lba_real;
+ lba_to_pba[lba_offset] = blocknum;
+ continue;
+ }
+
+ MEDIA_INFO(us).lba_to_pba[zone] = lba_to_pba;
+ MEDIA_INFO(us).pba_to_lba[zone] = pba_to_lba;
+ result = 0;
+ goto out;
+
+error:
+ kfree(lba_to_pba);
+ kfree(pba_to_lba);
+out:
+ return result;
+}
+
+/*
+ * Checks to see whether we have already mapped a certain zone
+ * If we haven't, the map is generated
+ */
+static void alauda_ensure_map_for_zone(struct us_data *us, unsigned int zone)
+{
+ if (MEDIA_INFO(us).lba_to_pba[zone] == NULL
+ || MEDIA_INFO(us).pba_to_lba[zone] == NULL)
+ alauda_read_map(us, zone);
+}
+
+/*
+ * Erases an entire block
+ */
+static int alauda_erase_block(struct us_data *us, u16 pba)
+{
+ int rc;
+ unsigned char command[] = {
+ ALAUDA_BULK_CMD, ALAUDA_BULK_ERASE_BLOCK, PBA_HI(pba),
+ PBA_ZONE(pba), 0, PBA_LO(pba), 0x02, 0, MEDIA_PORT(us)
+ };
+ unsigned char buf[2];
+
+ US_DEBUGP("alauda_erase_block: Erasing PBA %d\n", pba);
+
+ rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ command, 9, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ rc = usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ buf, 2, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ US_DEBUGP("alauda_erase_block: Erase result: %02X %02X\n",
+ buf[0], buf[1]);
+ return rc;
+}
+
+/*
+ * Reads data from a certain offset page inside a PBA, including interleaved
+ * redundancy data. Returns (pagesize+64)*pages bytes in data.
+ */
+static int alauda_read_block_raw(struct us_data *us, u16 pba,
+ unsigned int page, unsigned int pages, unsigned char *data)
+{
+ int rc;
+ unsigned char command[] = {
+ ALAUDA_BULK_CMD, ALAUDA_BULK_READ_BLOCK, PBA_HI(pba),
+ PBA_ZONE(pba), 0, PBA_LO(pba) + page, pages, 0, MEDIA_PORT(us)
+ };
+
+ US_DEBUGP("alauda_read_block: pba %d page %d count %d\n",
+ pba, page, pages);
+
+ rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ command, 9, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ return usb_stor_bulk_transfer_buf(us, us->recv_bulk_pipe,
+ data, (MEDIA_INFO(us).pagesize + 64) * pages, NULL);
+}
+
+/*
+ * Reads data from a certain offset page inside a PBA, excluding redundancy
+ * data. Returns pagesize*pages bytes in data. Note that data must be big enough
+ * to hold (pagesize+64)*pages bytes of data, but you can ignore those 'extra'
+ * trailing bytes outside this function.
+ */
+static int alauda_read_block(struct us_data *us, u16 pba,
+ unsigned int page, unsigned int pages, unsigned char *data)
+{
+ int i, rc;
+ unsigned int pagesize = MEDIA_INFO(us).pagesize;
+
+ rc = alauda_read_block_raw(us, pba, page, pages, data);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ /* Cut out the redundancy data */
+ for (i = 0; i < pages; i++) {
+ int dest_offset = i * pagesize;
+ int src_offset = i * (pagesize + 64);
+ memmove(data + dest_offset, data + src_offset, pagesize);
+ }
+
+ return rc;
+}
+
+/*
+ * Writes an entire block of data and checks status after write.
+ * Redundancy data must be already included in data. Data should be
+ * (pagesize+64)*blocksize bytes in length.
+ */
+static int alauda_write_block(struct us_data *us, u16 pba, unsigned char *data)
+{
+ int rc;
+ struct alauda_info *info = (struct alauda_info *) us->extra;
+ unsigned char command[] = {
+ ALAUDA_BULK_CMD, ALAUDA_BULK_WRITE_BLOCK, PBA_HI(pba),
+ PBA_ZONE(pba), 0, PBA_LO(pba), 32, 0, MEDIA_PORT(us)
+ };
+
+ US_DEBUGP("alauda_write_block: pba %d\n", pba);
+
+ rc = usb_stor_bulk_transfer_buf(us, us->send_bulk_pipe,
+ command, 9, NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ rc = usb_stor_bulk_transfer_buf(us, info->wr_ep, data,
+ (MEDIA_INFO(us).pagesize + 64) * MEDIA_INFO(us).blocksize,
+ NULL);
+ if (rc != USB_STOR_XFER_GOOD)
+ return rc;
+
+ return alauda_check_status2(us);
+}
+
+/*
+ * Write some data to a specific LBA.
+ */
+static int alauda_write_lba(struct us_data *us, u16 lba,
+ unsigned int page, unsigned int pages,
+ unsigned char *ptr, unsigned char *blockbuffer)
+{
+ u16 pba, lbap, new_pba;
+ unsigned char *bptr, *cptr, *xptr;
+ unsigned char ecc[3];
+ int i, result;
+ unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
+ unsigned int zonesize = MEDIA_INFO(us).zonesize;
+ unsigned int pagesize = MEDIA_INFO(us).pagesize;
+ unsigned int blocksize = MEDIA_INFO(us).blocksize;
+ unsigned int lba_offset = lba % uzonesize;
+ unsigned int new_pba_offset;
+ unsigned int zone = lba / uzonesize;
+
+ alauda_ensure_map_for_zone(us, zone);
+
+ pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset];
+ if (pba == 1) {
+ /* Maybe it is impossible to write to PBA 1.
+ Fake success, but don't do anything. */
+ printk("alauda_write_lba: avoid writing to pba 1\n");
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ new_pba = alauda_find_unused_pba(&MEDIA_INFO(us), zone);
+ if (!new_pba) {
+ printk("alauda_write_lba: Out of unused blocks\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* read old contents */
+ if (pba != UNDEF) {
+ result = alauda_read_block_raw(us, pba, 0,
+ blocksize, blockbuffer);
+ if (result != USB_STOR_XFER_GOOD)
+ return result;
+ } else {
+ memset(blockbuffer, 0, blocksize * (pagesize + 64));
+ }
+
+ lbap = (lba_offset << 1) | 0x1000;
+ if (parity[MSB_of(lbap) ^ LSB_of(lbap)])
+ lbap ^= 1;
+
+ /* check old contents and fill lba */
+ for (i = 0; i < blocksize; i++) {
+ bptr = blockbuffer + (i * (pagesize + 64));
+ cptr = bptr + pagesize;
+ nand_compute_ecc(bptr, ecc);
+ if (!nand_compare_ecc(cptr+13, ecc)) {
+ US_DEBUGP("Warning: bad ecc in page %d- of pba %d\n",
+ i, pba);
+ nand_store_ecc(cptr+13, ecc);
+ }
+ nand_compute_ecc(bptr + (pagesize / 2), ecc);
+ if (!nand_compare_ecc(cptr+8, ecc)) {
+ US_DEBUGP("Warning: bad ecc in page %d+ of pba %d\n",
+ i, pba);
+ nand_store_ecc(cptr+8, ecc);
+ }
+ cptr[6] = cptr[11] = MSB_of(lbap);
+ cptr[7] = cptr[12] = LSB_of(lbap);
+ }
+
+ /* copy in new stuff and compute ECC */
+ xptr = ptr;
+ for (i = page; i < page+pages; i++) {
+ bptr = blockbuffer + (i * (pagesize + 64));
+ cptr = bptr + pagesize;
+ memcpy(bptr, xptr, pagesize);
+ xptr += pagesize;
+ nand_compute_ecc(bptr, ecc);
+ nand_store_ecc(cptr+13, ecc);
+ nand_compute_ecc(bptr + (pagesize / 2), ecc);
+ nand_store_ecc(cptr+8, ecc);
+ }
+
+ result = alauda_write_block(us, new_pba, blockbuffer);
+ if (result != USB_STOR_XFER_GOOD)
+ return result;
+
+ new_pba_offset = new_pba - (zone * zonesize);
+ MEDIA_INFO(us).pba_to_lba[zone][new_pba_offset] = lba;
+ MEDIA_INFO(us).lba_to_pba[zone][lba_offset] = new_pba;
+ US_DEBUGP("alauda_write_lba: Remapped LBA %d to PBA %d\n",
+ lba, new_pba);
+
+ if (pba != UNDEF) {
+ unsigned int pba_offset = pba - (zone * zonesize);
+ result = alauda_erase_block(us, pba);
+ if (result != USB_STOR_XFER_GOOD)
+ return result;
+ MEDIA_INFO(us).pba_to_lba[zone][pba_offset] = UNDEF;
+ }
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+/*
+ * Read data from a specific sector address
+ */
+static int alauda_read_data(struct us_data *us, unsigned long address,
+ unsigned int sectors)
+{
+ unsigned char *buffer;
+ u16 lba, max_lba;
+ unsigned int page, len, index, offset;
+ unsigned int blockshift = MEDIA_INFO(us).blockshift;
+ unsigned int pageshift = MEDIA_INFO(us).pageshift;
+ unsigned int blocksize = MEDIA_INFO(us).blocksize;
+ unsigned int pagesize = MEDIA_INFO(us).pagesize;
+ unsigned int uzonesize = MEDIA_INFO(us).uzonesize;
+ int result;
+
+ /*
+ * Since we only read in one block at a time, we have to create
+ * a bounce buffer and move the data a piece at a time between the
+ * bounce buffer and the actual transfer buffer.
+ * We make this buffer big enough to hold temporary redundancy data,
+ * which we use when reading the data blocks.
+ */
+
+ len = min(sectors, blocksize) * (pagesize + 64);
+ buffer = kmalloc(len, GFP_NOIO);
+ if (buffer == NULL) {
+ printk("alauda_read_data: Out of memory\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* Figure out the initial LBA and page */
+ lba = address >> blockshift;
+ page = (address & MEDIA_INFO(us).blockmask);
+ max_lba = MEDIA_INFO(us).capacity >> (blockshift + pageshift);
+
+ result = USB_STOR_TRANSPORT_GOOD;
+ index = offset = 0;
+
+ while (sectors > 0) {
+ unsigned int zone = lba / uzonesize; /* integer division */
+ unsigned int lba_offset = lba - (zone * uzonesize);
+ unsigned int pages;
+ u16 pba;
+ alauda_ensure_map_for_zone(us, zone);
+
+ /* Not overflowing capacity? */
+ if (lba >= max_lba) {
+ US_DEBUGP("Error: Requested lba %u exceeds "
+ "maximum %u\n", lba, max_lba);
+ result = USB_STOR_TRANSPORT_ERROR;
+ break;
+ }
+
+ /* Find number of pages we can read in this block */
+ pages = min(sectors, blocksize - page);
+ len = pages << pageshift;
+
+ /* Find where this lba lives on disk */
+ pba = MEDIA_INFO(us).lba_to_pba[zone][lba_offset];
+
+ if (pba == UNDEF) { /* this lba was never written */
+ US_DEBUGP("Read %d zero pages (LBA %d) page %d\n",
+ pages, lba, page);
+
+ /* This is not really an error. It just means
+ that the block has never been written.
+ Instead of returning USB_STOR_TRANSPORT_ERROR
+ it is better to return all zero data. */
+
+ memset(buffer, 0, len);
+ } else {
+ US_DEBUGP("Read %d pages, from PBA %d"
+ " (LBA %d) page %d\n",
+ pages, pba, lba, page);
+
+ result = alauda_read_block(us, pba, page, pages, buffer);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ break;
+ }
+
+ /* Store the data in the transfer buffer */
+ usb_stor_access_xfer_buf(buffer, len, us->srb,
+ &index, &offset, TO_XFER_BUF);
+
+ page = 0;
+ lba++;
+ sectors -= pages;
+ }
+
+ kfree(buffer);
+ return result;
+}
+
+/*
+ * Write data to a specific sector address
+ */
+static int alauda_write_data(struct us_data *us, unsigned long address,
+ unsigned int sectors)
+{
+ unsigned char *buffer, *blockbuffer;
+ unsigned int page, len, index, offset;
+ unsigned int blockshift = MEDIA_INFO(us).blockshift;
+ unsigned int pageshift = MEDIA_INFO(us).pageshift;
+ unsigned int blocksize = MEDIA_INFO(us).blocksize;
+ unsigned int pagesize = MEDIA_INFO(us).pagesize;
+ u16 lba, max_lba;
+ int result;
+
+ /*
+ * Since we don't write the user data directly to the device,
+ * we have to create a bounce buffer and move the data a piece
+ * at a time between the bounce buffer and the actual transfer buffer.
+ */
+
+ len = min(sectors, blocksize) * pagesize;
+ buffer = kmalloc(len, GFP_NOIO);
+ if (buffer == NULL) {
+ printk("alauda_write_data: Out of memory\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /*
+ * We also need a temporary block buffer, where we read in the old data,
+ * overwrite parts with the new data, and manipulate the redundancy data
+ */
+ blockbuffer = kmalloc((pagesize + 64) * blocksize, GFP_NOIO);
+ if (blockbuffer == NULL) {
+ printk("alauda_write_data: Out of memory\n");
+ kfree(buffer);
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+
+ /* Figure out the initial LBA and page */
+ lba = address >> blockshift;
+ page = (address & MEDIA_INFO(us).blockmask);
+ max_lba = MEDIA_INFO(us).capacity >> (pageshift + blockshift);
+
+ result = USB_STOR_TRANSPORT_GOOD;
+ index = offset = 0;
+
+ while (sectors > 0) {
+ /* Write as many sectors as possible in this block */
+ unsigned int pages = min(sectors, blocksize - page);
+ len = pages << pageshift;
+
+ /* Not overflowing capacity? */
+ if (lba >= max_lba) {
+ US_DEBUGP("alauda_write_data: Requested lba %u exceeds "
+ "maximum %u\n", lba, max_lba);
+ result = USB_STOR_TRANSPORT_ERROR;
+ break;
+ }
+
+ /* Get the data from the transfer buffer */
+ usb_stor_access_xfer_buf(buffer, len, us->srb,
+ &index, &offset, FROM_XFER_BUF);
+
+ result = alauda_write_lba(us, lba, page, pages, buffer,
+ blockbuffer);
+ if (result != USB_STOR_TRANSPORT_GOOD)
+ break;
+
+ page = 0;
+ lba++;
+ sectors -= pages;
+ }
+
+ kfree(buffer);
+ kfree(blockbuffer);
+ return result;
+}
+
+/*
+ * Our interface with the rest of the world
+ */
+
+static void alauda_info_destructor(void *extra)
+{
+ struct alauda_info *info = (struct alauda_info *) extra;
+ int port;
+
+ if (!info)
+ return;
+
+ for (port = 0; port < 2; port++) {
+ struct alauda_media_info *media_info = &info->port[port];
+
+ alauda_free_maps(media_info);
+ kfree(media_info->lba_to_pba);
+ kfree(media_info->pba_to_lba);
+ }
+}
+
+/*
+ * Initialize alauda_info struct and find the data-write endpoint
+ */
+int init_alauda(struct us_data *us)
+{
+ struct alauda_info *info;
+ struct usb_host_interface *altsetting = us->pusb_intf->cur_altsetting;
+ nand_init_ecc();
+
+ us->extra = kzalloc(sizeof(struct alauda_info), GFP_NOIO);
+ if (!us->extra) {
+ US_DEBUGP("init_alauda: Gah! Can't allocate storage for"
+ "alauda info struct!\n");
+ return USB_STOR_TRANSPORT_ERROR;
+ }
+ info = (struct alauda_info *) us->extra;
+ us->extra_destructor = alauda_info_destructor;
+
+ info->wr_ep = usb_sndbulkpipe(us->pusb_dev,
+ altsetting->endpoint[0].desc.bEndpointAddress
+ & USB_ENDPOINT_NUMBER_MASK);
+
+ return USB_STOR_TRANSPORT_GOOD;
+}
+
+int alauda_transport(struct scsi_cmnd *srb, struct us_data *us)
+{
+ int rc;
+ struct alauda_info *info = (struct alauda_info *) us->extra;
+ unsigned char *ptr = us->iobuf;
+ static unsigned char inquiry_response[36] = {
+ 0x00, 0x80, 0x00, 0x01, 0x1F, 0x00, 0x00, 0x00
+ };
+
+ if (srb->cmnd[0] == INQUIRY) {
+ US_DEBUGP("alauda_transport: INQUIRY. "
+ "Returning bogus response.\n");
+ memcpy(ptr, inquiry_response, sizeof(inquiry_response));
+ fill_inquiry_response(us, ptr, 36);
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == TEST_UNIT_READY) {
+ US_DEBUGP("alauda_transport: TEST_UNIT_READY.\n");
+ return alauda_check_media(us);
+ }
+
+ if (srb->cmnd[0] == READ_CAPACITY) {
+ unsigned int num_zones;
+ unsigned long capacity;
+
+ rc = alauda_check_media(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ num_zones = MEDIA_INFO(us).capacity >> (MEDIA_INFO(us).zoneshift
+ + MEDIA_INFO(us).blockshift + MEDIA_INFO(us).pageshift);
+
+ capacity = num_zones * MEDIA_INFO(us).uzonesize
+ * MEDIA_INFO(us).blocksize;
+
+ /* Report capacity and page size */
+ ((__be32 *) ptr)[0] = cpu_to_be32(capacity - 1);
+ ((__be32 *) ptr)[1] = cpu_to_be32(512);
+
+ usb_stor_set_xfer_buf(ptr, 8, srb);
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == READ_10) {
+ unsigned int page, pages;
+
+ rc = alauda_check_media(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ page = short_pack(srb->cmnd[3], srb->cmnd[2]);
+ page <<= 16;
+ page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
+ pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
+
+ US_DEBUGP("alauda_transport: READ_10: page %d pagect %d\n",
+ page, pages);
+
+ return alauda_read_data(us, page, pages);
+ }
+
+ if (srb->cmnd[0] == WRITE_10) {
+ unsigned int page, pages;
+
+ rc = alauda_check_media(us);
+ if (rc != USB_STOR_TRANSPORT_GOOD)
+ return rc;
+
+ page = short_pack(srb->cmnd[3], srb->cmnd[2]);
+ page <<= 16;
+ page |= short_pack(srb->cmnd[5], srb->cmnd[4]);
+ pages = short_pack(srb->cmnd[8], srb->cmnd[7]);
+
+ US_DEBUGP("alauda_transport: WRITE_10: page %d pagect %d\n",
+ page, pages);
+
+ return alauda_write_data(us, page, pages);
+ }
+
+ if (srb->cmnd[0] == REQUEST_SENSE) {
+ US_DEBUGP("alauda_transport: REQUEST_SENSE.\n");
+
+ memset(ptr, 0, 18);
+ ptr[0] = 0xF0;
+ ptr[2] = info->sense_key;
+ ptr[7] = 11;
+ ptr[12] = info->sense_asc;
+ ptr[13] = info->sense_ascq;
+ usb_stor_set_xfer_buf(ptr, 18, srb);
+
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ if (srb->cmnd[0] == ALLOW_MEDIUM_REMOVAL) {
+ /* sure. whatever. not like we can stop the user from popping
+ the media out of the device (no locking doors, etc) */
+ return USB_STOR_TRANSPORT_GOOD;
+ }
+
+ US_DEBUGP("alauda_transport: Gah! Unknown command: %d (0x%x)\n",
+ srb->cmnd[0], srb->cmnd[0]);
+ info->sense_key = 0x05;
+ info->sense_asc = 0x20;
+ info->sense_ascq = 0x00;
+ return USB_STOR_TRANSPORT_FAILED;
+}
+
diff --git a/drivers/usb/storage/alauda.h b/drivers/usb/storage/alauda.h
new file mode 100644
index 00000000000..a700f87d080
--- /dev/null
+++ b/drivers/usb/storage/alauda.h
@@ -0,0 +1,100 @@
+/*
+ * Driver for Alauda-based card readers
+ *
+ * Current development and maintenance by:
+ * (c) 2005 Daniel Drake <dsd@gentoo.org>
+ *
+ * See alauda.c for more explanation.
+ *
+ * This program is free software; you can redistribute it and/or modify it
+ * under the terms of the GNU General Public License as published by the
+ * Free Software Foundation; either version 2, or (at your option) any
+ * later version.
+ *
+ * This program is distributed in the hope that it will be useful, but
+ * WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU
+ * General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License along
+ * with this program; if not, write to the Free Software Foundation, Inc.,
+ * 675 Mass Ave, Cambridge, MA 02139, USA.
+ */
+
+#ifndef _USB_ALAUDA_H
+#define _USB_ALAUDA_H
+
+/*
+ * Status bytes
+ */
+#define ALAUDA_STATUS_ERROR 0x01
+#define ALAUDA_STATUS_READY 0x40
+
+/*
+ * Control opcodes (for request field)
+ */
+#define ALAUDA_GET_XD_MEDIA_STATUS 0x08
+#define ALAUDA_GET_SM_MEDIA_STATUS 0x98
+#define ALAUDA_ACK_XD_MEDIA_CHANGE 0x0a
+#define ALAUDA_ACK_SM_MEDIA_CHANGE 0x9a
+#define ALAUDA_GET_XD_MEDIA_SIG 0x86
+#define ALAUDA_GET_SM_MEDIA_SIG 0x96
+
+/*
+ * Bulk command identity (byte 0)
+ */
+#define ALAUDA_BULK_CMD 0x40
+
+/*
+ * Bulk opcodes (byte 1)
+ */
+#define ALAUDA_BULK_GET_REDU_DATA 0x85
+#define ALAUDA_BULK_READ_BLOCK 0x94
+#define ALAUDA_BULK_ERASE_BLOCK 0xa3
+#define ALAUDA_BULK_WRITE_BLOCK 0xb4
+#define ALAUDA_BULK_GET_STATUS2 0xb7
+#define ALAUDA_BULK_RESET_MEDIA 0xe0
+
+/*
+ * Port to operate on (byte 8)
+ */
+#define ALAUDA_PORT_XD 0x00
+#define ALAUDA_PORT_SM 0x01
+
+/*
+ * LBA and PBA are unsigned ints. Special values.
+ */
+#define UNDEF 0xffff
+#define SPARE 0xfffe
+#define UNUSABLE 0xfffd
+
+int init_alauda(struct us_data *us);
+int alauda_transport(struct scsi_cmnd *srb, struct us_data *us);
+
+struct alauda_media_info {
+ unsigned long capacity; /* total media size in bytes */
+ unsigned int pagesize; /* page size in bytes */
+ unsigned int blocksize; /* number of pages per block */
+ unsigned int uzonesize; /* number of usable blocks per zone */
+ unsigned int zonesize; /* number of blocks per zone */
+ unsigned int blockmask; /* mask to get page from address */
+
+ unsigned char pageshift;
+ unsigned char blockshift;
+ unsigned char zoneshift;
+
+ u16 **lba_to_pba; /* logical to physical block map */
+ u16 **pba_to_lba; /* physical to logical block map */
+};
+
+struct alauda_info {
+ struct alauda_media_info port[2];
+ int wr_ep; /* endpoint to write data out of */
+
+ unsigned char sense_key;
+ unsigned long sense_asc; /* additional sense code */
+ unsigned long sense_ascq; /* additional sense code qualifier */
+};
+
+#endif
+
diff --git a/drivers/usb/storage/unusual_devs.h b/drivers/usb/storage/unusual_devs.h
index be3c06d1753..7a865dd0468 100644
--- a/drivers/usb/storage/unusual_devs.h
+++ b/drivers/usb/storage/unusual_devs.h
@@ -535,6 +535,13 @@ UNUSUAL_DEV( 0x057b, 0x0022, 0x0000, 0x9999,
"Silicon Media R/W",
US_SC_DEVICE, US_PR_DEVICE, NULL, 0),
+#ifdef CONFIG_USB_STORAGE_ALAUDA
+UNUSUAL_DEV( 0x0584, 0x0008, 0x0102, 0x0102,
+ "Fujifilm",
+ "DPC-R1 (Alauda)",
+ US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
+#endif
+
/* Fabrizio Fellini <fello@libero.it> */
UNUSUAL_DEV( 0x0595, 0x4343, 0x0000, 0x2210,
"Fujifilm",
@@ -784,6 +791,13 @@ UNUSUAL_DEV( 0x07af, 0x0006, 0x0100, 0x0100,
US_SC_SCSI, US_PR_DPCM_USB, NULL, 0 ),
#endif
+#ifdef CONFIG_USB_STORAGE_ALAUDA
+UNUSUAL_DEV( 0x07b4, 0x010a, 0x0102, 0x0102,
+ "Olympus",
+ "MAUSB-10 (Alauda)",
+ US_SC_SCSI, US_PR_ALAUDA, init_alauda, 0 ),
+#endif
+
#ifdef CONFIG_USB_STORAGE_DATAFAB
UNUSUAL_DEV( 0x07c4, 0xa000, 0x0000, 0x0015,
"Datafab",
diff --git a/drivers/usb/storage/usb.c b/drivers/usb/storage/usb.c
index 85c8c17b3c0..dbcf23980ff 100644
--- a/drivers/usb/storage/usb.c
+++ b/drivers/usb/storage/usb.c
@@ -94,6 +94,9 @@
#ifdef CONFIG_USB_STORAGE_ONETOUCH
#include "onetouch.h"
#endif
+#ifdef CONFIG_USB_STORAGE_ALAUDA
+#include "alauda.h"
+#endif
/* Some informational data */
MODULE_AUTHOR("Matthew Dharm <mdharm-usb@one-eyed-alien.net>");
@@ -644,6 +647,15 @@ static int get_protocol(struct us_data *us)
break;
#endif
+#ifdef CONFIG_USB_STORAGE_ALAUDA
+ case US_PR_ALAUDA:
+ us->transport_name = "Alauda Control/Bulk";
+ us->transport = alauda_transport;
+ us->transport_reset = usb_stor_Bulk_reset;
+ us->max_lun = 1;
+ break;
+#endif
+
default:
return -EIO;
}
diff --git a/include/linux/usb_usual.h b/include/linux/usb_usual.h
index f9c058f3371..b2d08984a9f 100644
--- a/include/linux/usb_usual.h
+++ b/include/linux/usb_usual.h
@@ -102,6 +102,9 @@ enum { US_DO_ALL_FLAGS };
#ifdef CONFIG_USB_STORAGE_JUMPSHOT
#define US_PR_JUMPSHOT 0xf3 /* Lexar Jumpshot */
#endif
+#ifdef CONFIG_USB_STORAGE_ALAUDA
+#define US_PR_ALAUDA 0xf4 /* Alauda chipsets */
+#endif
#define US_PR_DEVICE 0xff /* Use device's value */