diff options
140 files changed, 1913 insertions, 1556 deletions
diff --git a/Documentation/kernel-parameters.txt b/Documentation/kernel-parameters.txt index 90b3924071b..e87bdbfbcc7 100644 --- a/Documentation/kernel-parameters.txt +++ b/Documentation/kernel-parameters.txt @@ -17,6 +17,12 @@ are specified on the kernel command line with the module name plus usbcore.blinkenlights=1 +Hyphens (dashes) and underscores are equivalent in parameter names, so + log_buf_len=1M print-fatal-signals=1 +can also be entered as + log-buf-len=1M print_fatal_signals=1 + + This document may not be entirely up to date and comprehensive. The command "modinfo -p ${modulename}" shows a current list of all parameters of a loadable module. Loadable modules, after being loaded into the running kernel, also @@ -345,7 +351,7 @@ and is between 256 and 4096 characters. It is defined in the file not play well with APC CPU idle - disable it if you have APC and your system crashes randomly. - apic= [APIC,i386] Advanced Programmable Interrupt Controller + apic= [APIC,X86-32] Advanced Programmable Interrupt Controller Change the output verbosity whilst booting Format: { quiet (default) | verbose | debug } Change the amount of debugging information output @@ -702,7 +708,7 @@ and is between 256 and 4096 characters. It is defined in the file to discrete, to make X server driver able to add WB entry later. This parameter enables that. - enable_timer_pin_1 [i386,x86-64] + enable_timer_pin_1 [X86] Enable PIN 1 of APIC timer Can be useful to work around chipset bugs (in particular on some ATI chipsets). @@ -775,7 +781,7 @@ and is between 256 and 4096 characters. It is defined in the file hashdist= [KNL,NUMA] Large hashes allocated during boot are distributed across NUMA nodes. Defaults on - for IA-64, off otherwise. + for 64bit NUMA, off otherwise. Format: 0 | 1 (for off | on) hcl= [IA-64] SGI's Hardware Graph compatibility layer diff --git a/Documentation/lockdep-design.txt b/Documentation/lockdep-design.txt index 938ea22f2cc..e20d913d591 100644 --- a/Documentation/lockdep-design.txt +++ b/Documentation/lockdep-design.txt @@ -54,9 +54,9 @@ locking error messages, inside curlies. A contrived example: The bit position indicates STATE, STATE-read, for each of the states listed above, and the character displayed in each indicates: - '.' acquired while irqs disabled - '+' acquired in irq context - '-' acquired with irqs enabled + '.' acquired while irqs disabled and not in irq context + '-' acquired in irq context + '+' acquired with irqs enabled '?' acquired in irq context with irqs enabled. Unused mutexes cannot be part of the cause of an error. diff --git a/MAINTAINERS b/MAINTAINERS index 9de961bd121..2b349ba4add 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -3434,11 +3434,10 @@ L: linuxppc-dev@ozlabs.org S: Maintained LINUX FOR POWERPC EMBEDDED MPC5XXX -P: Sylvain Munaut -M: tnt@246tNt.com P: Grant Likely M: grant.likely@secretlab.ca L: linuxppc-dev@ozlabs.org +T: git git://git.secretlab.ca/git/linux-2.6.git S: Maintained LINUX FOR POWERPC EMBEDDED PPC4XX @@ -3456,6 +3455,7 @@ P: Grant Likely M: grant.likely@secretlab.ca W: http://wiki.secretlab.ca/index.php/Linux_on_Xilinx_Virtex L: linuxppc-dev@ozlabs.org +T: git git://git.secretlab.ca/git/linux-2.6.git S: Maintained LINUX FOR POWERPC EMBEDDED PPC8XX diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9faccc411c2..e60ec54df33 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -454,6 +454,7 @@ config ARCH_MXC select ARCH_MTD_XIP select GENERIC_GPIO select ARCH_REQUIRE_GPIOLIB + select HAVE_CLK help Support for Freescale MXC/iMX-based family of processors diff --git a/arch/arm/configs/kirkwood_defconfig b/arch/arm/configs/kirkwood_defconfig index c367ae44012..dcf8153a947 100644 --- a/arch/arm/configs/kirkwood_defconfig +++ b/arch/arm/configs/kirkwood_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.29-rc5 -# Tue Mar 3 21:45:57 2009 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 11:58:57 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -66,20 +66,20 @@ CONFIG_NAMESPACES=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y # CONFIG_EMBEDDED is not set CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y # CONFIG_KALLSYMS_ALL is not set # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y @@ -89,6 +89,7 @@ CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y CONFIG_PCI_QUIRKS=y CONFIG_SLUB_DEBUG=y +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set @@ -101,6 +102,7 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_SLABINFO=y CONFIG_RT_MUTEXES=y @@ -113,7 +115,6 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_SRCVERSION_ALL is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -142,6 +143,7 @@ CONFIG_DEFAULT_IOSCHED="cfq" # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -162,6 +164,7 @@ CONFIG_ARCH_KIRKWOOD=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set @@ -217,6 +220,7 @@ CONFIG_PCI_SYSCALL=y CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set # CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -237,6 +241,7 @@ CONFIG_AEABI=y CONFIG_ARCH_FLATMEM_HAS_HOLES=y # CONFIG_ARCH_SPARSEMEM_DEFAULT is not set # CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set @@ -249,6 +254,8 @@ CONFIG_SPLIT_PTLOCK_CPUS=4096 CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -293,7 +300,6 @@ CONFIG_NET=y # # Networking options # -CONFIG_COMPAT_NET_DEV_OPS=y CONFIG_PACKET=y CONFIG_PACKET_MMAP=y CONFIG_UNIX=y @@ -324,7 +330,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -357,6 +363,7 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set # CONFIG_DCB is not set @@ -365,20 +372,20 @@ CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set -# CONFIG_PHONET is not set CONFIG_WIRELESS=y CONFIG_CFG80211=y # CONFIG_CFG80211_REG_DEBUG is not set -# CONFIG_NL80211 is not set CONFIG_WIRELESS_OLD_REGULATORY=y CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y CONFIG_LIB80211=y +# CONFIG_LIB80211_DEBUG is not set CONFIG_MAC80211=y # @@ -513,7 +520,6 @@ CONFIG_MTD_NAND_ORION=y # LPDDR flash memory drivers # # CONFIG_MTD_LPDDR is not set -# CONFIG_MTD_QINFO_PROBE is not set # # UBI - Unsorted block images @@ -592,8 +598,10 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set # CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set # CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set @@ -614,6 +622,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -687,6 +696,7 @@ CONFIG_SATA_MV=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -724,8 +734,10 @@ CONFIG_MII=y # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set # CONFIG_ENC28J60 is not set +# CONFIG_ETHOC is not set # CONFIG_SMC911X is not set # CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set @@ -763,6 +775,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -777,6 +790,7 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set # CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -789,10 +803,11 @@ CONFIG_WLAN_80211=y CONFIG_LIBERTAS=y # CONFIG_LIBERTAS_USB is not set CONFIG_LIBERTAS_SDIO=y +# CONFIG_LIBERTAS_SPI is not set # CONFIG_LIBERTAS_DEBUG is not set # CONFIG_LIBERTAS_THINFIRM is not set -# CONFIG_HERMES is not set # CONFIG_ATMEL is not set +# CONFIG_AT76C50X_USB is not set # CONFIG_PRISM54 is not set # CONFIG_USB_ZD1201 is not set # CONFIG_USB_NET_RNDIS_WLAN is not set @@ -800,20 +815,20 @@ CONFIG_LIBERTAS_SDIO=y # CONFIG_RTL8187 is not set # CONFIG_ADM8211 is not set # CONFIG_MAC80211_HWSIM is not set +# CONFIG_MWL8K is not set # CONFIG_P54_COMMON is not set # CONFIG_ATH5K is not set # CONFIG_ATH9K is not set +# CONFIG_AR9170_USB is not set # CONFIG_IPW2100 is not set # CONFIG_IPW2200 is not set -# CONFIG_IWLCORE is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_IWLAGN is not set -# CONFIG_IWL3945 is not set +# CONFIG_IWLWIFI is not set # CONFIG_HOSTAP is not set # CONFIG_B43 is not set # CONFIG_B43LEGACY is not set # CONFIG_ZD1211RW is not set # CONFIG_RT2X00 is not set +# CONFIG_HERMES is not set # # Enable WiMAX (Networking options) to see the WiMAX drivers @@ -908,6 +923,7 @@ CONFIG_SERIAL_8250_RUNTIME_UARTS=2 # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set @@ -982,7 +998,6 @@ CONFIG_I2C_MV64XXX=y # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -1082,15 +1097,17 @@ CONFIG_USB_HID=y # # Special HID drivers # -CONFIG_HID_COMPAT=y CONFIG_HID_A4TECH=y CONFIG_HID_APPLE=y CONFIG_HID_BELKIN=y CONFIG_HID_CHERRY=y CONFIG_HID_CHICONY=y CONFIG_HID_CYPRESS=y +# CONFIG_DRAGONRISE_FF is not set CONFIG_HID_EZKEY=y +CONFIG_HID_KYE=y CONFIG_HID_GYRATION=y +CONFIG_HID_KENSINGTON=y CONFIG_HID_LOGITECH=y # CONFIG_LOGITECH_FF is not set # CONFIG_LOGIRUMBLEPAD2_FF is not set @@ -1152,11 +1169,11 @@ CONFIG_USB_PRINTER=m # CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may also be needed; +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set @@ -1198,7 +1215,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1215,6 +1231,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # OTG and related infrastructure # # CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set # CONFIG_UWB is not set CONFIG_MMC=y # CONFIG_MMC_DEBUG is not set @@ -1245,7 +1262,11 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_DAC124S085 is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1255,6 +1276,10 @@ CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y # CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1329,7 +1354,9 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set +# CONFIG_AUXDISPLAY is not set # CONFIG_REGULATOR is not set # CONFIG_UIO is not set # CONFIG_STAGING is not set @@ -1341,6 +1368,7 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set # CONFIG_EXT4_FS is not set CONFIG_JBD=y @@ -1361,6 +1389,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -1419,6 +1452,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1430,7 +1464,6 @@ CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_REGISTER_V4 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1502,6 +1535,9 @@ CONFIG_DEBUG_KERNEL=y CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 # CONFIG_SCHED_DEBUG is not set # CONFIG_SCHEDSTATS is not set # CONFIG_TIMER_STATS is not set @@ -1538,10 +1574,12 @@ CONFIG_DEBUG_MEMORY_INIT=y # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set CONFIG_NOP_TRACER=y CONFIG_HAVE_FUNCTION_TRACER=y CONFIG_RING_BUFFER=y CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y # # Tracers @@ -1551,11 +1589,15 @@ CONFIG_TRACING=y # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set # CONFIG_BOOT_TRACER is not set # CONFIG_TRACE_BRANCH_PROFILING is not set # CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set # CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_DYNAMIC_PRINTK_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set @@ -1587,10 +1629,12 @@ CONFIG_CRYPTO_BLKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG2=y +CONFIG_CRYPTO_PCOMP=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=y # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1659,6 +1703,7 @@ CONFIG_CRYPTO_ARC4=y # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set # @@ -1667,6 +1712,7 @@ CONFIG_CRYPTO_ARC4=y # CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines @@ -1682,7 +1728,7 @@ CONFIG_CRC32=y CONFIG_LIBCRC32C=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/mv78xx0_defconfig b/arch/arm/configs/mv78xx0_defconfig index b0698722e0c..398274b0771 100644 --- a/arch/arm/configs/mv78xx0_defconfig +++ b/arch/arm/configs/mv78xx0_defconfig @@ -1,11 +1,11 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.26-rc5 -# Fri Jun 13 02:57:32 2008 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 14:22:12 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y -# CONFIG_GENERIC_GPIO is not set +CONFIG_GENERIC_GPIO=y CONFIG_GENERIC_TIME=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_MMU=y @@ -22,8 +22,7 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y +CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -43,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -54,32 +62,35 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y -CONFIG_SYSCTL_SYSCALL_CHECK=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y @@ -87,10 +98,9 @@ CONFIG_KPROBES=y CONFIG_KRETPROBES=y CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_DMA_ATTRS is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set +CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -98,12 +108,10 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_KMOD is not set CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set +# CONFIG_BLK_DEV_INTEGRITY is not set # # IO Schedulers @@ -117,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System Type @@ -127,11 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_CO285 is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -152,28 +159,23 @@ CONFIG_ARCH_MV78XX0=y # CONFIG_ARCH_ORION5X is not set # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Marvell MV78xx0 Implementations # CONFIG_MACH_DB78X00_BP=y CONFIG_MACH_RD78X00_MASA=y - -# -# Boot options -# - -# -# Power management -# CONFIG_PLAT_ORION=y # @@ -199,6 +201,7 @@ CONFIG_ARM_THUMB=y # CONFIG_CPU_DCACHE_DISABLE is not set CONFIG_OUTER_CACHE=y CONFIG_CACHE_FEROCEON_L2=y +# CONFIG_CACHE_FEROCEON_L2_WRITETHROUGH is not set # # Bus support @@ -208,6 +211,8 @@ CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -217,25 +222,33 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +CONFIG_HIGHMEM=y CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_BOUNCE=y CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_ALIGNMENT_TRAP=y # @@ -248,6 +261,11 @@ CONFIG_CMDLINE="" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # @@ -263,6 +281,8 @@ CONFIG_VFP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set @@ -271,10 +291,6 @@ CONFIG_BINFMT_ELF=y # # CONFIG_PM is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y - -# -# Networking -# CONFIG_NET=y # @@ -310,7 +326,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -325,6 +341,7 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +# CONFIG_NET_DSA is not set # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -334,26 +351,23 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -CONFIG_WIRELESS_EXT=y -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIRELESS is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -368,6 +382,8 @@ CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y CONFIG_FW_LOADER=y +# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_EXTRA_FIRMWARE="" # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set # CONFIG_SYS_HYPERVISOR is not set @@ -376,6 +392,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -429,9 +446,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_INTEL_VR_NOR is not set @@ -456,6 +471,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set @@ -466,6 +482,11 @@ CONFIG_MTD_NAND_ORION=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -486,10 +507,20 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set +# CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -547,7 +578,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -566,6 +601,8 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_NSP32 is not set # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set +# CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -632,11 +669,15 @@ CONFIG_SATA_MV=y # # IEEE 1394 (FireWire) support # + +# +# Enable only one of the two stacks, unless you know what you are doing +# # CONFIG_FIREWIRE is not set # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y -# CONFIG_NETDEVICES_MULTIQUEUE is not set +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -644,7 +685,26 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -654,19 +714,25 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -676,18 +742,20 @@ CONFIG_NET_PCI=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_E1000E is not set -# CONFIG_E1000E_ENABLED is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -701,6 +769,9 @@ CONFIG_NETDEV_1000=y CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set +# CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -709,7 +780,10 @@ CONFIG_MV643XX_ETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -786,11 +860,11 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -799,44 +873,63 @@ CONFIG_DEVPORT=y CONFIG_I2C=y CONFIG_I2C_BOARDINFO=y CONFIG_I2C_CHARDEV=y +CONFIG_I2C_HELPER_AUTO=y # # I2C Hardware Bus support # + +# +# PC SMBus host controller drivers +# # CONFIG_I2C_ALI1535 is not set # CONFIG_I2C_ALI1563 is not set # CONFIG_I2C_ALI15X3 is not set # CONFIG_I2C_AMD756 is not set # CONFIG_I2C_AMD8111 is not set # CONFIG_I2C_I801 is not set -# CONFIG_I2C_I810 is not set +# CONFIG_I2C_ISCH is not set # CONFIG_I2C_PIIX4 is not set # CONFIG_I2C_NFORCE2 is not set -# CONFIG_I2C_OCORES is not set -# CONFIG_I2C_PARPORT_LIGHT is not set -# CONFIG_I2C_PROSAVAGE is not set -# CONFIG_I2C_SAVAGE4 is not set -# CONFIG_I2C_SIMTEC is not set # CONFIG_I2C_SIS5595 is not set # CONFIG_I2C_SIS630 is not set # CONFIG_I2C_SIS96X is not set -# CONFIG_I2C_TAOS_EVM is not set -# CONFIG_I2C_STUB is not set -# CONFIG_I2C_TINY_USB is not set # CONFIG_I2C_VIA is not set # CONFIG_I2C_VIAPRO is not set + +# +# I2C system bus drivers (mostly embedded / system-on-chip) +# +# CONFIG_I2C_GPIO is not set +CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_OCORES is not set +# CONFIG_I2C_SIMTEC is not set + +# +# External I2C/SMBus adapter drivers +# +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_TAOS_EVM is not set +# CONFIG_I2C_TINY_USB is not set + +# +# Graphics adapter I2C/DDC channel drivers +# # CONFIG_I2C_VOODOO3 is not set + +# +# Other I2C/SMBus bus drivers +# # CONFIG_I2C_PCA_PLATFORM is not set -CONFIG_I2C_MV64XXX=y +# CONFIG_I2C_STUB is not set # # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set -# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_PCA9539 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -848,6 +941,7 @@ CONFIG_I2C_MV64XXX=y # CONFIG_POWER_SUPPLY is not set CONFIG_HWMON=y # CONFIG_HWMON_VID is not set +# CONFIG_SENSORS_AD7414 is not set # CONFIG_SENSORS_AD7418 is not set # CONFIG_SENSORS_ADM1021 is not set # CONFIG_SENSORS_ADM1025 is not set @@ -855,14 +949,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -877,10 +974,15 @@ CONFIG_HWMON=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -900,20 +1002,28 @@ CONFIG_HWMON=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # # Multifunction device drivers # +# CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set -# CONFIG_MFD_ASIC3 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set +# CONFIG_MFD_TMIO is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -944,10 +1054,6 @@ CONFIG_SSB_POSSIBLE=y # Display device support # # CONFIG_DISPLAY_SUPPORT is not set - -# -# Sound -# # CONFIG_SOUND is not set CONFIG_HID_SUPPORT=y CONFIG_HID=y @@ -958,9 +1064,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -978,6 +1111,9 @@ CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -986,12 +1122,15 @@ CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -999,20 +1138,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y # CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y @@ -1028,7 +1167,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # # CONFIG_USB_MDC800 is not set # CONFIG_USB_MICROTEK is not set -# CONFIG_USB_MON is not set # # USB port drivers @@ -1041,7 +1179,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set -# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1049,7 +1187,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1059,14 +1196,29 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y # # LED drivers # +# CONFIG_LEDS_PCA9532 is not set +# CONFIG_LEDS_GPIO is not set +# CONFIG_LEDS_LP5521 is not set +# CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1074,7 +1226,12 @@ CONFIG_LEDS_CLASS=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set # CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1105,6 +1262,8 @@ CONFIG_RTC_DRV_RS5C372=y CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set # CONFIG_RTC_DRV_S35390A is not set +# CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1114,18 +1273,25 @@ CONFIG_RTC_DRV_M41T80=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set # CONFIG_RTC_DRV_M48T86 is not set +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # # on-CPU RTC drivers # +# CONFIG_DMADEVICES is not set +# CONFIG_AUXDISPLAY is not set +# CONFIG_REGULATOR is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1134,14 +1300,25 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1151,6 +1328,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -1174,15 +1356,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1202,25 +1382,27 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set +# CONFIG_OMFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y # CONFIG_NFS_V3_ACL is not set # CONFIG_NFS_V4 is not set -# CONFIG_NFSD is not set CONFIG_ROOT_NFS=y +# CONFIG_NFSD is not set CONFIG_LOCKD=y CONFIG_LOCKD_V4=y CONFIG_NFS_COMMON=y CONFIG_SUNRPC=y -# CONFIG_SUNRPC_BIND34 is not set # CONFIG_RPCSEC_GSS_KRB5 is not set # CONFIG_RPCSEC_GSS_SPKM3 is not set # CONFIG_SMB_FS is not set @@ -1301,11 +1483,16 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y +# CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set +CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1320,22 +1507,55 @@ CONFIG_DEBUG_PREEMPT=y # CONFIG_LOCK_STAT is not set # CONFIG_DEBUG_SPINLOCK_SLEEP is not set # CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +CONFIG_STACKTRACE=y # CONFIG_DEBUG_KOBJECT is not set +# CONFIG_DEBUG_HIGHMEM is not set # CONFIG_DEBUG_BUGVERBOSE is not set CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_VM is not set # CONFIG_DEBUG_WRITECOUNT is not set +# CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set -CONFIG_FRAME_POINTER=y +# CONFIG_DEBUG_NOTIFIERS is not set # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set # CONFIG_LATENCYTOP is not set +CONFIG_SYSCTL_SYSCALL_CHECK=y +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_PREEMPT_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1347,17 +1567,27 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1393,6 +1623,10 @@ CONFIG_CRYPTO_PCBC=m # CONFIG_CRYPTO_MD4 is not set # CONFIG_CRYPTO_MD5 is not set # CONFIG_CRYPTO_MICHAEL_MIC is not set +# CONFIG_CRYPTO_RMD128 is not set +# CONFIG_CRYPTO_RMD160 is not set +# CONFIG_CRYPTO_RMD256 is not set +# CONFIG_CRYPTO_RMD320 is not set # CONFIG_CRYPTO_SHA1 is not set # CONFIG_CRYPTO_SHA256 is not set # CONFIG_CRYPTO_SHA512 is not set @@ -1422,25 +1656,32 @@ CONFIG_CRYPTO_PCBC=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m +# CONFIG_CRC_T10DIF is not set CONFIG_CRC_ITU_T=m CONFIG_CRC32=y # CONFIG_CRC7 is not set # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/configs/mx31moboard_defconfig b/arch/arm/configs/mx31moboard_defconfig deleted file mode 100644 index e90f86d6dee..00000000000 --- a/arch/arm/configs/mx31moboard_defconfig +++ /dev/null @@ -1,790 +0,0 @@ -# -# Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc5 -# Fri Oct 24 11:41:22 2008 -# -CONFIG_ARM=y -CONFIG_SYS_SUPPORTS_APM_EMULATION=y -CONFIG_GENERIC_GPIO=y -CONFIG_GENERIC_TIME=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_MMU=y -# CONFIG_NO_IOPORT is not set -CONFIG_GENERIC_HARDIRQS=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_TRACE_IRQFLAGS_SUPPORT=y -CONFIG_HARDIRQS_SW_RESEND=y -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_RWSEM_GENERIC_SPINLOCK=y -# CONFIG_ARCH_HAS_ILOG2_U32 is not set -# CONFIG_ARCH_HAS_ILOG2_U64 is not set -CONFIG_GENERIC_HWEIGHT=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y -CONFIG_ARCH_MTD_XIP=y -CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y -CONFIG_VECTORS_BASE=0xffff0000 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" - -# -# General setup -# -CONFIG_EXPERIMENTAL=y -CONFIG_BROKEN_ON_SMP=y -CONFIG_LOCK_KERNEL=y -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_LOCALVERSION="" -CONFIG_LOCALVERSION_AUTO=y -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -# CONFIG_POSIX_MQUEUE is not set -# CONFIG_BSD_PROCESS_ACCT is not set -# CONFIG_TASKSTATS is not set -# CONFIG_AUDIT is not set -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set -CONFIG_GROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -# CONFIG_RT_GROUP_SCHED is not set -CONFIG_USER_SCHED=y -# CONFIG_CGROUP_SCHED is not set -CONFIG_SYSFS_DEPRECATED=y -CONFIG_SYSFS_DEPRECATED_V2=y -# CONFIG_RELAY is not set -# CONFIG_NAMESPACES is not set -# CONFIG_BLK_DEV_INITRD is not set -CONFIG_CC_OPTIMIZE_FOR_SIZE=y -CONFIG_SYSCTL=y -CONFIG_EMBEDDED=y -CONFIG_UID16=y -CONFIG_SYSCTL_SYSCALL=y -CONFIG_KALLSYMS=y -# CONFIG_KALLSYMS_EXTRA_PASS is not set -CONFIG_HOTPLUG=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_ANON_INODES=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -CONFIG_SHMEM=y -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLAB=y -# CONFIG_SLUB is not set -# CONFIG_SLOB is not set -# CONFIG_PROFILING is not set -# CONFIG_MARKERS is not set -CONFIG_HAVE_OPROFILE=y -# CONFIG_KPROBES is not set -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set -# CONFIG_HAVE_IOREMAP_PROT is not set -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -# CONFIG_MODULE_FORCE_LOAD is not set -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -CONFIG_MODVERSIONS=y -# CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y -CONFIG_BLOCK=y -# CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set -# CONFIG_BLK_DEV_BSG is not set -# CONFIG_BLK_DEV_INTEGRITY is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_AS=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -# CONFIG_DEFAULT_AS is not set -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y - -# -# System Type -# -# CONFIG_ARCH_AAEC2000 is not set -# CONFIG_ARCH_INTEGRATOR is not set -# CONFIG_ARCH_REALVIEW is not set -# CONFIG_ARCH_VERSATILE is not set -# CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set -# CONFIG_ARCH_CLPS711X is not set -# CONFIG_ARCH_EBSA110 is not set -# CONFIG_ARCH_EP93XX is not set -# CONFIG_ARCH_FOOTBRIDGE is not set -# CONFIG_ARCH_NETX is not set -# CONFIG_ARCH_H720X is not set -# CONFIG_ARCH_IMX is not set -# CONFIG_ARCH_IOP13XX is not set -# CONFIG_ARCH_IOP32X is not set -# CONFIG_ARCH_IOP33X is not set -# CONFIG_ARCH_IXP23XX is not set -# CONFIG_ARCH_IXP2000 is not set -# CONFIG_ARCH_IXP4XX is not set -# CONFIG_ARCH_L7200 is not set -# CONFIG_ARCH_KIRKWOOD is not set -# CONFIG_ARCH_KS8695 is not set -# CONFIG_ARCH_NS9XXX is not set -# CONFIG_ARCH_LOKI is not set -# CONFIG_ARCH_MV78XX0 is not set -CONFIG_ARCH_MXC=y -# CONFIG_ARCH_ORION5X is not set -# CONFIG_ARCH_PNX4008 is not set -# CONFIG_ARCH_PXA is not set -# CONFIG_ARCH_RPC is not set -# CONFIG_ARCH_SA1100 is not set -# CONFIG_ARCH_S3C2410 is not set -# CONFIG_ARCH_SHARK is not set -# CONFIG_ARCH_LH7A40X is not set -# CONFIG_ARCH_DAVINCI is not set -# CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set - -# -# Boot options -# - -# -# Power management -# - -# -# Freescale MXC Implementations -# -# CONFIG_ARCH_MX2 is not set -CONFIG_ARCH_MX3=y - -# -# MX3 Options -# -# CONFIG_MACH_MX31ADS is not set -# CONFIG_MACH_PCM037 is not set -# CONFIG_MACH_MX31LITE is not set -CONFIG_MACH_MX31MOBOARD=y -# CONFIG_MXC_IRQ_PRIOR is not set - -# -# Processor Type -# -CONFIG_CPU_32=y -CONFIG_CPU_V6=y -# CONFIG_CPU_32v6K is not set -CONFIG_CPU_32v6=y -CONFIG_CPU_ABRT_EV6=y -CONFIG_CPU_PABRT_NOIFAR=y -CONFIG_CPU_CACHE_V6=y -CONFIG_CPU_CACHE_VIPT=y -CONFIG_CPU_COPY_V6=y -CONFIG_CPU_TLB_V6=y -CONFIG_CPU_HAS_ASID=y -CONFIG_CPU_CP15=y -CONFIG_CPU_CP15_MMU=y - -# -# Processor Features -# -CONFIG_ARM_THUMB=y -# CONFIG_CPU_ICACHE_DISABLE is not set -# CONFIG_CPU_DCACHE_DISABLE is not set -# CONFIG_CPU_BPREDICT_DISABLE is not set -# CONFIG_OUTER_CACHE is not set - -# -# Bus support -# -# CONFIG_PCI_SYSCALL is not set -# CONFIG_ARCH_SUPPORTS_MSI is not set -# CONFIG_PCCARD is not set - -# -# Kernel Features -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y -CONFIG_GENERIC_CLOCKEVENTS_BUILD=y -CONFIG_PREEMPT=y -CONFIG_HZ=100 -CONFIG_AEABI=y -# CONFIG_OABI_COMPAT is not set -CONFIG_ARCH_FLATMEM_HAS_HOLES=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_FLATMEM_MANUAL=y -# CONFIG_DISCONTIGMEM_MANUAL is not set -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_FLATMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set -CONFIG_PAGEFLAGS_EXTENDED=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_ALIGNMENT_TRAP=y - -# -# Boot options -# -CONFIG_ZBOOT_ROM_TEXT=0x0 -CONFIG_ZBOOT_ROM_BSS=0x0 -CONFIG_CMDLINE="noinitrd console=ttymxc0,115200 root=/dev/mtdblock2 rw ip=off" -# CONFIG_XIP_KERNEL is not set -# CONFIG_KEXEC is not set - -# -# Floating point emulation -# - -# -# At least one emulation must be selected -# -CONFIG_VFP=y - -# -# Userspace binary formats -# -CONFIG_BINFMT_ELF=y -# CONFIG_BINFMT_AOUT is not set -# CONFIG_BINFMT_MISC is not set - -# -# Power management options -# -# CONFIG_PM is not set -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_NET=y - -# -# Networking options -# -CONFIG_PACKET=y -# CONFIG_PACKET_MMAP is not set -CONFIG_UNIX=y -# CONFIG_NET_KEY is not set -CONFIG_INET=y -# CONFIG_IP_MULTICAST is not set -# CONFIG_IP_ADVANCED_ROUTER is not set -CONFIG_IP_FIB_HASH=y -CONFIG_IP_PNP=y -CONFIG_IP_PNP_DHCP=y -# CONFIG_IP_PNP_BOOTP is not set -# CONFIG_IP_PNP_RARP is not set -# CONFIG_NET_IPIP is not set -# CONFIG_NET_IPGRE is not set -# CONFIG_ARPD is not set -# CONFIG_SYN_COOKIES is not set -# CONFIG_INET_AH is not set -# CONFIG_INET_ESP is not set -# CONFIG_INET_IPCOMP is not set -# CONFIG_INET_XFRM_TUNNEL is not set -# CONFIG_INET_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_TRANSPORT is not set -# CONFIG_INET_XFRM_MODE_TUNNEL is not set -# CONFIG_INET_XFRM_MODE_BEET is not set -# CONFIG_INET_LRO is not set -# CONFIG_INET_DIAG is not set -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -# CONFIG_IPV6 is not set -# CONFIG_NETWORK_SECMARK is not set -# CONFIG_NETFILTER is not set -# CONFIG_IP_DCCP is not set -# CONFIG_IP_SCTP is not set -# CONFIG_TIPC is not set -# CONFIG_ATM is not set -# CONFIG_BRIDGE is not set -# CONFIG_VLAN_8021Q is not set -# CONFIG_DECNET is not set -# CONFIG_LLC2 is not set -# CONFIG_IPX is not set -# CONFIG_ATALK is not set -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_ECONET is not set -# CONFIG_WAN_ROUTER is not set -# CONFIG_NET_SCHED is not set - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_HAMRADIO is not set -# CONFIG_CAN is not set -# CONFIG_IRDA is not set -# CONFIG_BT is not set -# CONFIG_AF_RXRPC is not set - -# -# Wireless -# -# CONFIG_CFG80211 is not set -# CONFIG_WIRELESS_EXT is not set -# CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set -# CONFIG_RFKILL is not set -# CONFIG_NET_9P is not set - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER_PATH="/sbin/hotplug" -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=m -CONFIG_FIRMWARE_IN_KERNEL=y -CONFIG_EXTRA_FIRMWARE="" -# CONFIG_SYS_HYPERVISOR is not set -# CONFIG_CONNECTOR is not set -CONFIG_MTD=y -# CONFIG_MTD_DEBUG is not set -# CONFIG_MTD_CONCAT is not set -CONFIG_MTD_PARTITIONS=y -CONFIG_MTD_REDBOOT_PARTS=y -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -CONFIG_MTD_REDBOOT_PARTS_READONLY=y -# CONFIG_MTD_CMDLINE_PARTS is not set -# CONFIG_MTD_AFS_PARTS is not set -# CONFIG_MTD_AR7_PARTS is not set - -# -# User Modules And Translation Layers -# -CONFIG_MTD_CHAR=y -CONFIG_MTD_BLKDEVS=y -CONFIG_MTD_BLOCK=y -# CONFIG_FTL is not set -# CONFIG_NFTL is not set -# CONFIG_INFTL is not set -# CONFIG_RFD_FTL is not set -# CONFIG_SSFDC is not set -# CONFIG_MTD_OOPS is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=y -# CONFIG_MTD_JEDECPROBE is not set -CONFIG_MTD_GEN_PROBE=y -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -# CONFIG_MTD_MAP_BANK_WIDTH_1 is not set -CONFIG_MTD_MAP_BANK_WIDTH_2=y -# CONFIG_MTD_MAP_BANK_WIDTH_4 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set -# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set -CONFIG_MTD_CFI_I1=y -# CONFIG_MTD_CFI_I2 is not set -# CONFIG_MTD_CFI_I4 is not set -# CONFIG_MTD_CFI_I8 is not set -# CONFIG_MTD_OTP is not set -# CONFIG_MTD_CFI_INTELEXT is not set -CONFIG_MTD_CFI_AMDSTD=y -# CONFIG_MTD_CFI_STAA is not set -CONFIG_MTD_CFI_UTIL=y -# CONFIG_MTD_RAM is not set -# CONFIG_MTD_ROM is not set -# CONFIG_MTD_ABSENT is not set -# CONFIG_MTD_XIP is not set - -# -# Mapping drivers for chip access -# -# CONFIG_MTD_COMPLEX_MAPPINGS is not set -CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=2 -# CONFIG_MTD_ARM_INTEGRATOR is not set -# CONFIG_MTD_PLATRAM is not set - -# -# Self-contained MTD device drivers -# -# CONFIG_MTD_SLRAM is not set -# CONFIG_MTD_PHRAM is not set -# CONFIG_MTD_MTDRAM is not set -# CONFIG_MTD_BLOCK2MTD is not set - -# -# Disk-On-Chip Device Drivers -# -# CONFIG_MTD_DOC2000 is not set -# CONFIG_MTD_DOC2001 is not set -# CONFIG_MTD_DOC2001PLUS is not set -# CONFIG_MTD_NAND is not set -# CONFIG_MTD_ONENAND is not set - -# -# UBI - Unsorted block images -# -# CONFIG_MTD_UBI is not set -# CONFIG_PARPORT is not set -# CONFIG_BLK_DEV is not set -# CONFIG_MISC_DEVICES is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -# CONFIG_RAID_ATTRS is not set -# CONFIG_SCSI is not set -# CONFIG_SCSI_DMA is not set -# CONFIG_SCSI_NETLINK is not set -# CONFIG_ATA is not set -# CONFIG_MD is not set -CONFIG_NETDEVICES=y -# CONFIG_DUMMY is not set -# CONFIG_BONDING is not set -# CONFIG_MACVLAN is not set -# CONFIG_EQUALIZER is not set -# CONFIG_TUN is not set -# CONFIG_VETH is not set -# CONFIG_PHYLIB is not set -CONFIG_NET_ETHERNET=y -CONFIG_MII=y -# CONFIG_AX88796 is not set -CONFIG_SMC91X=y -# CONFIG_DM9000 is not set -# CONFIG_IBM_NEW_EMAC_ZMII is not set -# CONFIG_IBM_NEW_EMAC_RGMII is not set -# CONFIG_IBM_NEW_EMAC_TAH is not set -# CONFIG_IBM_NEW_EMAC_EMAC4 is not set -# CONFIG_B44 is not set -# CONFIG_NETDEV_1000 is not set -# CONFIG_NETDEV_10000 is not set - -# -# Wireless LAN -# -# CONFIG_WLAN_PRE80211 is not set -# CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set -# CONFIG_WAN is not set -# CONFIG_PPP is not set -# CONFIG_SLIP is not set -# CONFIG_NETCONSOLE is not set -# CONFIG_NETPOLL is not set -# CONFIG_NET_POLL_CONTROLLER is not set -# CONFIG_ISDN is not set - -# -# Input device support -# -# CONFIG_INPUT is not set - -# -# Hardware I/O ports -# -# CONFIG_SERIO is not set -# CONFIG_GAMEPORT is not set - -# -# Character devices -# -# CONFIG_VT is not set -CONFIG_DEVKMEM=y -# CONFIG_SERIAL_NONSTANDARD is not set - -# -# Serial drivers -# -# CONFIG_SERIAL_8250 is not set - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_IMX=y -CONFIG_SERIAL_IMX_CONSOLE=y -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_UNIX98_PTYS=y -# CONFIG_LEGACY_PTYS is not set -# CONFIG_IPMI_HANDLER is not set -# CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set -# CONFIG_R3964 is not set -# CONFIG_RAW_DRIVER is not set -# CONFIG_TCG_TPM is not set -# CONFIG_I2C is not set -# CONFIG_SPI is not set -CONFIG_ARCH_REQUIRE_GPIOLIB=y -CONFIG_GPIOLIB=y -# CONFIG_GPIO_SYSFS is not set - -# -# I2C GPIO expanders: -# - -# -# PCI GPIO expanders: -# - -# -# SPI GPIO expanders: -# -# CONFIG_W1 is not set -# CONFIG_POWER_SUPPLY is not set -# CONFIG_HWMON is not set -# CONFIG_WATCHDOG is not set - -# -# Sonics Silicon Backplane -# -CONFIG_SSB_POSSIBLE=y -# CONFIG_SSB is not set - -# -# Multifunction device drivers -# -# CONFIG_MFD_CORE is not set -# CONFIG_MFD_SM501 is not set -# CONFIG_HTC_EGPIO is not set -# CONFIG_HTC_PASIC3 is not set -# CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set -# CONFIG_MFD_TC6393XB is not set - -# -# Multimedia devices -# - -# -# Multimedia core support -# -# CONFIG_VIDEO_DEV is not set -# CONFIG_DVB_CORE is not set -# CONFIG_VIDEO_MEDIA is not set - -# -# Multimedia drivers -# -# CONFIG_DAB is not set - -# -# Graphics support -# -# CONFIG_VGASTATE is not set -# CONFIG_VIDEO_OUTPUT_CONTROL is not set -# CONFIG_FB is not set -# CONFIG_BACKLIGHT_LCD_SUPPORT is not set - -# -# Display device support -# -# CONFIG_DISPLAY_SUPPORT is not set -# CONFIG_SOUND is not set -# CONFIG_USB_SUPPORT is not set -# CONFIG_MMC is not set -# CONFIG_NEW_LEDS is not set -CONFIG_RTC_LIB=y -# CONFIG_RTC_CLASS is not set -# CONFIG_DMADEVICES is not set - -# -# Voltage and Current regulators -# -# CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set -# CONFIG_UIO is not set - -# -# File systems -# -# CONFIG_EXT2_FS is not set -# CONFIG_EXT3_FS is not set -# CONFIG_EXT4DEV_FS is not set -# CONFIG_REISERFS_FS is not set -# CONFIG_JFS_FS is not set -# CONFIG_FS_POSIX_ACL is not set -# CONFIG_XFS_FS is not set -# CONFIG_OCFS2_FS is not set -# CONFIG_DNOTIFY is not set -CONFIG_INOTIFY=y -CONFIG_INOTIFY_USER=y -# CONFIG_QUOTA is not set -# CONFIG_AUTOFS_FS is not set -# CONFIG_AUTOFS4_FS is not set -# CONFIG_FUSE_FS is not set - -# -# CD-ROM/DVD Filesystems -# -# CONFIG_ISO9660_FS is not set -# CONFIG_UDF_FS is not set - -# -# DOS/FAT/NT Filesystems -# -# CONFIG_MSDOS_FS is not set -# CONFIG_VFAT_FS is not set -# CONFIG_NTFS_FS is not set - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_SYSCTL=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -# CONFIG_TMPFS_POSIX_ACL is not set -# CONFIG_HUGETLB_PAGE is not set -# CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# -# CONFIG_ADFS_FS is not set -# CONFIG_AFFS_FS is not set -# CONFIG_HFS_FS is not set -# CONFIG_HFSPLUS_FS is not set -# CONFIG_BEFS_FS is not set -# CONFIG_BFS_FS is not set -# CONFIG_EFS_FS is not set -CONFIG_JFFS2_FS=y -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -# CONFIG_CRAMFS is not set -# CONFIG_VXFS_FS is not set -# CONFIG_MINIX_FS is not set -# CONFIG_OMFS_FS is not set -# CONFIG_HPFS_FS is not set -# CONFIG_QNX4FS_FS is not set -# CONFIG_ROMFS_FS is not set -# CONFIG_SYSV_FS is not set -# CONFIG_UFS_FS is not set -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -# CONFIG_NFS_V3 is not set -# CONFIG_NFS_V4 is not set -CONFIG_ROOT_NFS=y -# CONFIG_NFSD is not set -CONFIG_LOCKD=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -# CONFIG_RPCSEC_GSS_KRB5 is not set -# CONFIG_RPCSEC_GSS_SPKM3 is not set -# CONFIG_SMB_FS is not set -# CONFIG_CIFS is not set -# CONFIG_NCP_FS is not set -# CONFIG_CODA_FS is not set -# CONFIG_AFS_FS is not set - -# -# Partition Types -# -# CONFIG_PARTITION_ADVANCED is not set -CONFIG_MSDOS_PARTITION=y -# CONFIG_NLS is not set -# CONFIG_DLM is not set - -# -# Kernel hacking -# -# CONFIG_PRINTK_TIME is not set -# CONFIG_ENABLE_WARN_DEPRECATED is not set -# CONFIG_ENABLE_MUST_CHECK is not set -CONFIG_FRAME_WARN=1024 -# CONFIG_MAGIC_SYSRQ is not set -# CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_KERNEL is not set -# CONFIG_DEBUG_BUGVERBOSE is not set -# CONFIG_DEBUG_MEMORY_INIT is not set -CONFIG_FRAME_POINTER=y -# CONFIG_LATENCYTOP is not set -CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_PREEMPT_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_CONTEXT_SWITCH_TRACER is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_DEBUG_USER is not set - -# -# Security options -# -# CONFIG_KEYS is not set -# CONFIG_SECURITY is not set -# CONFIG_SECURITY_FILE_CAPABILITIES is not set -# CONFIG_CRYPTO is not set - -# -# Library routines -# -CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set -# CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set -# CONFIG_CRC_T10DIF is not set -# CONFIG_CRC_ITU_T is not set -CONFIG_CRC32=y -# CONFIG_CRC7 is not set -# CONFIG_LIBCRC32C is not set -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT=y -CONFIG_HAS_DMA=y diff --git a/arch/arm/configs/mx3_defconfig b/arch/arm/configs/mx3_defconfig index 72a8201a537..20ada526f6d 100644 --- a/arch/arm/configs/mx3_defconfig +++ b/arch/arm/configs/mx3_defconfig @@ -197,7 +197,7 @@ CONFIG_MXC_PWM=y # CONFIG_CPU_32=y CONFIG_CPU_V6=y -CONFIG_CPU_32v6K=y +# CONFIG_CPU_32v6K is not set CONFIG_CPU_32v6=y CONFIG_CPU_ABRT_EV6=y CONFIG_CPU_PABRT_NOIFAR=y diff --git a/arch/arm/configs/orion5x_defconfig b/arch/arm/configs/orion5x_defconfig index 020e6a8a9e5..5b98f764511 100644 --- a/arch/arm/configs/orion5x_defconfig +++ b/arch/arm/configs/orion5x_defconfig @@ -1,7 +1,7 @@ # # Automatically generated make config: don't edit -# Linux kernel version: 2.6.27-rc4 -# Fri Aug 22 12:38:51 2008 +# Linux kernel version: 2.6.30-rc4 +# Mon May 4 14:07:25 2009 # CONFIG_ARM=y CONFIG_SYS_SUPPORTS_APM_EMULATION=y @@ -22,8 +22,6 @@ CONFIG_RWSEM_GENERIC_SPINLOCK=y # CONFIG_ARCH_HAS_ILOG2_U64 is not set CONFIG_GENERIC_HWEIGHT=y CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_SUPPORTS_AOUT=y -CONFIG_ZONE_DMA=y CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ=y CONFIG_VECTORS_BASE=0xffff0000 CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" @@ -44,10 +42,19 @@ CONFIG_SYSVIPC_SYSCTL=y # CONFIG_BSD_PROCESS_ACCT is not set # CONFIG_TASKSTATS is not set # CONFIG_AUDIT is not set + +# +# RCU Subsystem +# +CONFIG_CLASSIC_RCU=y +# CONFIG_TREE_RCU is not set +# CONFIG_PREEMPT_RCU is not set +# CONFIG_TREE_RCU_TRACE is not set +# CONFIG_PREEMPT_RCU_TRACE is not set # CONFIG_IKCONFIG is not set CONFIG_LOG_BUF_SHIFT=14 -# CONFIG_CGROUPS is not set # CONFIG_GROUP_SCHED is not set +# CONFIG_CGROUPS is not set CONFIG_SYSFS_DEPRECATED=y CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_RELAY is not set @@ -55,48 +62,45 @@ CONFIG_SYSFS_DEPRECATED_V2=y # CONFIG_BLK_DEV_INITRD is not set CONFIG_CC_OPTIMIZE_FOR_SIZE=y CONFIG_SYSCTL=y +CONFIG_ANON_INODES=y CONFIG_EMBEDDED=y CONFIG_UID16=y CONFIG_SYSCTL_SYSCALL=y CONFIG_KALLSYMS=y CONFIG_KALLSYMS_ALL=y # CONFIG_KALLSYMS_EXTRA_PASS is not set +# CONFIG_STRIP_ASM_SYMS is not set CONFIG_HOTPLUG=y CONFIG_PRINTK=y CONFIG_BUG=y CONFIG_ELF_CORE=y -CONFIG_COMPAT_BRK=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y -CONFIG_ANON_INODES=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y CONFIG_SHMEM=y +CONFIG_AIO=y CONFIG_VM_EVENT_COUNTERS=y +CONFIG_PCI_QUIRKS=y # CONFIG_SLUB_DEBUG is not set +CONFIG_COMPAT_BRK=y # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set CONFIG_PROFILING=y +CONFIG_TRACEPOINTS=y # CONFIG_MARKERS is not set CONFIG_OPROFILE=y CONFIG_HAVE_OPROFILE=y CONFIG_KPROBES=y -# CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS is not set CONFIG_KRETPROBES=y -# CONFIG_HAVE_IOREMAP_PROT is not set CONFIG_HAVE_KPROBES=y CONFIG_HAVE_KRETPROBES=y -# CONFIG_HAVE_ARCH_TRACEHOOK is not set -# CONFIG_HAVE_DMA_ATTRS is not set -# CONFIG_USE_GENERIC_SMP_HELPERS is not set -# CONFIG_HAVE_CLK is not set -CONFIG_PROC_PAGE_MONITOR=y +# CONFIG_SLOW_WORK is not set CONFIG_HAVE_GENERIC_DMA_COHERENT=y CONFIG_RT_MUTEXES=y -# CONFIG_TINY_SHMEM is not set CONFIG_BASE_SMALL=0 CONFIG_MODULES=y # CONFIG_MODULE_FORCE_LOAD is not set @@ -104,11 +108,8 @@ CONFIG_MODULE_UNLOAD=y # CONFIG_MODULE_FORCE_UNLOAD is not set # CONFIG_MODVERSIONS is not set # CONFIG_MODULE_SRCVERSION_ALL is not set -CONFIG_KMOD=y CONFIG_BLOCK=y # CONFIG_LBD is not set -# CONFIG_BLK_DEV_IO_TRACE is not set -# CONFIG_LSF is not set # CONFIG_BLK_DEV_BSG is not set # CONFIG_BLK_DEV_INTEGRITY is not set @@ -124,7 +125,7 @@ CONFIG_IOSCHED_CFQ=y CONFIG_DEFAULT_CFQ=y # CONFIG_DEFAULT_NOOP is not set CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_CLASSIC_RCU=y +# CONFIG_FREEZER is not set # # System Type @@ -134,10 +135,10 @@ CONFIG_CLASSIC_RCU=y # CONFIG_ARCH_REALVIEW is not set # CONFIG_ARCH_VERSATILE is not set # CONFIG_ARCH_AT91 is not set -# CONFIG_ARCH_CLPS7500 is not set # CONFIG_ARCH_CLPS711X is not set # CONFIG_ARCH_EBSA110 is not set # CONFIG_ARCH_EP93XX is not set +# CONFIG_ARCH_GEMINI is not set # CONFIG_ARCH_FOOTBRIDGE is not set # CONFIG_ARCH_NETX is not set # CONFIG_ARCH_H720X is not set @@ -158,14 +159,17 @@ CONFIG_CLASSIC_RCU=y CONFIG_ARCH_ORION5X=y # CONFIG_ARCH_PNX4008 is not set # CONFIG_ARCH_PXA is not set +# CONFIG_ARCH_MMP is not set # CONFIG_ARCH_RPC is not set # CONFIG_ARCH_SA1100 is not set # CONFIG_ARCH_S3C2410 is not set +# CONFIG_ARCH_S3C64XX is not set # CONFIG_ARCH_SHARK is not set # CONFIG_ARCH_LH7A40X is not set # CONFIG_ARCH_DAVINCI is not set # CONFIG_ARCH_OMAP is not set -# CONFIG_ARCH_MSM7X00A is not set +# CONFIG_ARCH_MSM is not set +# CONFIG_ARCH_W90X900 is not set # # Orion Implementations @@ -175,6 +179,7 @@ CONFIG_MACH_RD88F5182=y CONFIG_MACH_KUROBOX_PRO=y CONFIG_MACH_DNS323=y CONFIG_MACH_TS209=y +CONFIG_MACH_TERASTATION_PRO2=y CONFIG_MACH_LINKSTATION_PRO=y CONFIG_MACH_LINKSTATION_MINI=y CONFIG_MACH_TS409=y @@ -187,14 +192,6 @@ CONFIG_MACH_WNR854T=y CONFIG_MACH_RD88F5181L_GE=y CONFIG_MACH_RD88F5181L_FXO=y CONFIG_MACH_RD88F6183AP_GE=y - -# -# Boot options -# - -# -# Power management -# CONFIG_PLAT_ORION=y # @@ -228,6 +225,8 @@ CONFIG_PCI_SYSCALL=y # CONFIG_ARCH_SUPPORTS_MSI is not set CONFIG_PCI_LEGACY=y # CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_STUB is not set +# CONFIG_PCI_IOV is not set # CONFIG_PCCARD is not set # @@ -237,25 +236,32 @@ CONFIG_TICK_ONESHOT=y CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y CONFIG_GENERIC_CLOCKEVENTS_BUILD=y +CONFIG_VMSPLIT_3G=y +# CONFIG_VMSPLIT_2G is not set +# CONFIG_VMSPLIT_1G is not set +CONFIG_PAGE_OFFSET=0xC0000000 CONFIG_PREEMPT=y CONFIG_HZ=100 CONFIG_AEABI=y CONFIG_OABI_COMPAT=y -# CONFIG_ARCH_DISCONTIGMEM_ENABLE is not set +CONFIG_ARCH_FLATMEM_HAS_HOLES=y +# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set +# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set +# CONFIG_HIGHMEM is not set CONFIG_SELECT_MEMORY_MODEL=y CONFIG_FLATMEM_MANUAL=y # CONFIG_DISCONTIGMEM_MANUAL is not set # CONFIG_SPARSEMEM_MANUAL is not set CONFIG_FLATMEM=y CONFIG_FLAT_NODE_MEM_MAP=y -# CONFIG_SPARSEMEM_STATIC is not set -# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set CONFIG_PAGEFLAGS_EXTENDED=y CONFIG_SPLIT_PTLOCK_CPUS=4096 -# CONFIG_RESOURCES_64BIT is not set -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y +# CONFIG_PHYS_ADDR_T_64BIT is not set +CONFIG_ZONE_DMA_FLAG=0 CONFIG_VIRT_TO_BUS=y +CONFIG_UNEVICTABLE_LRU=y +CONFIG_HAVE_MLOCK=y +CONFIG_HAVE_MLOCKED_PAGE_BIT=y CONFIG_LEDS=y CONFIG_LEDS_CPU=y CONFIG_ALIGNMENT_TRAP=y @@ -270,6 +276,11 @@ CONFIG_CMDLINE="" # CONFIG_KEXEC is not set # +# CPU Power Management +# +# CONFIG_CPU_IDLE is not set + +# # Floating point emulation # @@ -285,13 +296,18 @@ CONFIG_VFP=y # Userspace binary formats # CONFIG_BINFMT_ELF=y +# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set +CONFIG_HAVE_AOUT=y # CONFIG_BINFMT_AOUT is not set # CONFIG_BINFMT_MISC is not set # # Power management options # -# CONFIG_PM is not set +CONFIG_PM=y +# CONFIG_PM_DEBUG is not set +# CONFIG_SUSPEND is not set +# CONFIG_APM_EMULATION is not set CONFIG_ARCH_SUSPEND_POSSIBLE=y CONFIG_NET=y @@ -328,7 +344,7 @@ CONFIG_IP_PNP_BOOTP=y CONFIG_INET_XFRM_MODE_TRANSPORT=y CONFIG_INET_XFRM_MODE_TUNNEL=y CONFIG_INET_XFRM_MODE_BEET=y -# CONFIG_INET_LRO is not set +CONFIG_INET_LRO=y CONFIG_INET_DIAG=y CONFIG_INET_TCP_DIAG=y # CONFIG_TCP_CONG_ADVANCED is not set @@ -343,6 +359,15 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_TIPC is not set # CONFIG_ATM is not set # CONFIG_BRIDGE is not set +CONFIG_NET_DSA=y +CONFIG_NET_DSA_TAG_DSA=y +CONFIG_NET_DSA_TAG_EDSA=y +# CONFIG_NET_DSA_TAG_TRAILER is not set +CONFIG_NET_DSA_MV88E6XXX=y +# CONFIG_NET_DSA_MV88E6060 is not set +CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y +CONFIG_NET_DSA_MV88E6131=y +CONFIG_NET_DSA_MV88E6123_61_65=y # CONFIG_VLAN_8021Q is not set # CONFIG_DECNET is not set # CONFIG_LLC2 is not set @@ -352,27 +377,29 @@ CONFIG_DEFAULT_TCP_CONG="cubic" # CONFIG_LAPB is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set +# CONFIG_PHONET is not set # CONFIG_NET_SCHED is not set +# CONFIG_DCB is not set # # Network testing # CONFIG_NET_PKTGEN=m # CONFIG_NET_TCPPROBE is not set +# CONFIG_NET_DROP_MONITOR is not set # CONFIG_HAMRADIO is not set # CONFIG_CAN is not set # CONFIG_IRDA is not set # CONFIG_BT is not set # CONFIG_AF_RXRPC is not set - -# -# Wireless -# +CONFIG_WIRELESS=y # CONFIG_CFG80211 is not set +# CONFIG_WIRELESS_OLD_REGULATORY is not set CONFIG_WIRELESS_EXT=y CONFIG_WIRELESS_EXT_SYSFS=y +# CONFIG_LIB80211 is not set # CONFIG_MAC80211 is not set -# CONFIG_IEEE80211 is not set +# CONFIG_WIMAX is not set # CONFIG_RFKILL is not set # CONFIG_NET_9P is not set @@ -397,6 +424,7 @@ CONFIG_MTD=y # CONFIG_MTD_DEBUG is not set # CONFIG_MTD_CONCAT is not set CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_TESTS is not set # CONFIG_MTD_REDBOOT_PARTS is not set CONFIG_MTD_CMDLINE_PARTS=y # CONFIG_MTD_AFS_PARTS is not set @@ -450,9 +478,7 @@ CONFIG_MTD_CFI_UTIL=y # # CONFIG_MTD_COMPLEX_MAPPINGS is not set CONFIG_MTD_PHYSMAP=y -CONFIG_MTD_PHYSMAP_START=0x0 -CONFIG_MTD_PHYSMAP_LEN=0x0 -CONFIG_MTD_PHYSMAP_BANKWIDTH=0 +# CONFIG_MTD_PHYSMAP_COMPAT is not set # CONFIG_MTD_ARM_INTEGRATOR is not set # CONFIG_MTD_IMPA7 is not set # CONFIG_MTD_INTEL_VR_NOR is not set @@ -477,6 +503,7 @@ CONFIG_MTD_NAND=y CONFIG_MTD_NAND_VERIFY_WRITE=y # CONFIG_MTD_NAND_ECC_SMC is not set # CONFIG_MTD_NAND_MUSEUM_IDS is not set +# CONFIG_MTD_NAND_GPIO is not set CONFIG_MTD_NAND_IDS=y # CONFIG_MTD_NAND_DISKONCHIP is not set # CONFIG_MTD_NAND_CAFE is not set @@ -487,6 +514,11 @@ CONFIG_MTD_NAND_ORION=y # CONFIG_MTD_ONENAND is not set # +# LPDDR flash memory drivers +# +# CONFIG_MTD_LPDDR is not set + +# # UBI - Unsorted block images # # CONFIG_MTD_UBI is not set @@ -507,11 +539,20 @@ CONFIG_BLK_DEV_LOOP=y # CONFIG_ATA_OVER_ETH is not set CONFIG_MISC_DEVICES=y # CONFIG_PHANTOM is not set -# CONFIG_EEPROM_93CX6 is not set # CONFIG_SGI_IOC4 is not set # CONFIG_TIFM_CORE is not set +# CONFIG_ICS932S401 is not set # CONFIG_ENCLOSURE_SERVICES is not set # CONFIG_HP_ILO is not set +# CONFIG_ISL29003 is not set +# CONFIG_C2PORT is not set + +# +# EEPROM support +# +# CONFIG_EEPROM_AT24 is not set +# CONFIG_EEPROM_LEGACY is not set +# CONFIG_EEPROM_93CX6 is not set CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -569,7 +610,11 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_MEGARAID_NEWGEN is not set # CONFIG_MEGARAID_LEGACY is not set # CONFIG_MEGARAID_SAS is not set +# CONFIG_SCSI_MPT2SAS is not set # CONFIG_SCSI_HPTIOP is not set +# CONFIG_LIBFC is not set +# CONFIG_LIBFCOE is not set +# CONFIG_FCOE is not set # CONFIG_SCSI_DMX3191D is not set # CONFIG_SCSI_FUTURE_DOMAIN is not set # CONFIG_SCSI_IPS is not set @@ -589,6 +634,7 @@ CONFIG_SCSI_LOWLEVEL=y # CONFIG_SCSI_DEBUG is not set # CONFIG_SCSI_SRP is not set # CONFIG_SCSI_DH is not set +# CONFIG_SCSI_OSD_INITIATOR is not set CONFIG_ATA=y # CONFIG_ATA_NONSTANDARD is not set CONFIG_SATA_PMP=y @@ -663,6 +709,7 @@ CONFIG_SATA_MV=y # CONFIG_IEEE1394 is not set # CONFIG_I2O is not set CONFIG_NETDEVICES=y +CONFIG_COMPAT_NET_DEV_OPS=y # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_MACVLAN is not set @@ -670,7 +717,26 @@ CONFIG_NETDEVICES=y # CONFIG_TUN is not set # CONFIG_VETH is not set # CONFIG_ARCNET is not set -# CONFIG_PHYLIB is not set +CONFIG_PHYLIB=y + +# +# MII PHY device drivers +# +CONFIG_MARVELL_PHY=y +# CONFIG_DAVICOM_PHY is not set +# CONFIG_QSEMI_PHY is not set +# CONFIG_LXT_PHY is not set +# CONFIG_CICADA_PHY is not set +# CONFIG_VITESSE_PHY is not set +# CONFIG_SMSC_PHY is not set +# CONFIG_BROADCOM_PHY is not set +# CONFIG_ICPLUS_PHY is not set +# CONFIG_REALTEK_PHY is not set +# CONFIG_NATIONAL_PHY is not set +# CONFIG_STE10XP is not set +# CONFIG_LSI_ET1011C_PHY is not set +# CONFIG_FIXED_PHY is not set +# CONFIG_MDIO_BITBANG is not set CONFIG_NET_ETHERNET=y CONFIG_MII=y # CONFIG_AX88796 is not set @@ -680,19 +746,25 @@ CONFIG_MII=y # CONFIG_NET_VENDOR_3COM is not set # CONFIG_SMC91X is not set # CONFIG_DM9000 is not set +# CONFIG_ETHOC is not set +# CONFIG_SMC911X is not set +# CONFIG_SMSC911X is not set +# CONFIG_DNET is not set # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_IBM_NEW_EMAC_ZMII is not set # CONFIG_IBM_NEW_EMAC_RGMII is not set # CONFIG_IBM_NEW_EMAC_TAH is not set # CONFIG_IBM_NEW_EMAC_EMAC4 is not set +# CONFIG_IBM_NEW_EMAC_NO_FLOW_CTRL is not set +# CONFIG_IBM_NEW_EMAC_MAL_CLR_ICINTSTAT is not set +# CONFIG_IBM_NEW_EMAC_MAL_COMMON_ERR is not set CONFIG_NET_PCI=y # CONFIG_PCNET32 is not set # CONFIG_AMD8111_ETH is not set # CONFIG_ADAPTEC_STARFIRE is not set # CONFIG_B44 is not set # CONFIG_FORCEDETH is not set -# CONFIG_EEPRO100 is not set # CONFIG_E100 is not set # CONFIG_FEALNX is not set # CONFIG_NATSEMI is not set @@ -702,10 +774,12 @@ CONFIG_NET_PCI=y # CONFIG_R6040 is not set # CONFIG_SIS900 is not set # CONFIG_EPIC100 is not set +# CONFIG_SMSC9420 is not set # CONFIG_SUNDANCE is not set # CONFIG_TLAN is not set # CONFIG_VIA_RHINE is not set # CONFIG_SC92031 is not set +# CONFIG_ATL2 is not set CONFIG_NETDEV_1000=y # CONFIG_ACENIC is not set # CONFIG_DL2K is not set @@ -713,6 +787,7 @@ CONFIG_NETDEV_1000=y # CONFIG_E1000E is not set # CONFIG_IP1000 is not set # CONFIG_IGB is not set +# CONFIG_IGBVF is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set @@ -727,6 +802,8 @@ CONFIG_MV643XX_ETH=y # CONFIG_QLA3XXX is not set # CONFIG_ATL1 is not set # CONFIG_ATL1E is not set +# CONFIG_ATL1C is not set +# CONFIG_JME is not set # CONFIG_NETDEV_10000 is not set # CONFIG_TR is not set @@ -735,7 +812,10 @@ CONFIG_MV643XX_ETH=y # # CONFIG_WLAN_PRE80211 is not set # CONFIG_WLAN_80211 is not set -# CONFIG_IWLWIFI_LEDS is not set + +# +# Enable WiMAX (Networking options) to see the WiMAX drivers +# # # USB Network Adapters @@ -819,11 +899,11 @@ CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y # CONFIG_SERIAL_JSM is not set CONFIG_UNIX98_PTYS=y +# CONFIG_DEVPTS_MULTIPLE_INSTANCES is not set CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=16 # CONFIG_IPMI_HANDLER is not set # CONFIG_HW_RANDOM is not set -# CONFIG_NVRAM is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_RAW_DRIVER is not set @@ -886,12 +966,9 @@ CONFIG_I2C_MV64XXX=y # Miscellaneous I2C Chip support # # CONFIG_DS1682 is not set -# CONFIG_EEPROM_AT24 is not set -# CONFIG_EEPROM_LEGACY is not set # CONFIG_SENSORS_PCF8574 is not set # CONFIG_PCF8575 is not set # CONFIG_SENSORS_PCA9539 is not set -# CONFIG_SENSORS_PCF8591 is not set # CONFIG_SENSORS_MAX6875 is not set # CONFIG_SENSORS_TSL2550 is not set # CONFIG_I2C_DEBUG_CORE is not set @@ -911,14 +988,17 @@ CONFIG_HWMON=y # CONFIG_SENSORS_ADM1029 is not set # CONFIG_SENSORS_ADM1031 is not set # CONFIG_SENSORS_ADM9240 is not set +# CONFIG_SENSORS_ADT7462 is not set # CONFIG_SENSORS_ADT7470 is not set # CONFIG_SENSORS_ADT7473 is not set +# CONFIG_SENSORS_ADT7475 is not set # CONFIG_SENSORS_ATXP1 is not set # CONFIG_SENSORS_DS1621 is not set # CONFIG_SENSORS_I5K_AMB is not set # CONFIG_SENSORS_F71805F is not set # CONFIG_SENSORS_F71882FG is not set # CONFIG_SENSORS_F75375S is not set +# CONFIG_SENSORS_G760A is not set # CONFIG_SENSORS_GL518SM is not set # CONFIG_SENSORS_GL520SM is not set # CONFIG_SENSORS_IT87 is not set @@ -933,10 +1013,15 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_LM90 is not set # CONFIG_SENSORS_LM92 is not set # CONFIG_SENSORS_LM93 is not set +# CONFIG_SENSORS_LTC4215 is not set +# CONFIG_SENSORS_LTC4245 is not set +# CONFIG_SENSORS_LM95241 is not set # CONFIG_SENSORS_MAX1619 is not set # CONFIG_SENSORS_MAX6650 is not set # CONFIG_SENSORS_PC87360 is not set # CONFIG_SENSORS_PC87427 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_SHT15 is not set # CONFIG_SENSORS_SIS5595 is not set # CONFIG_SENSORS_DME1737 is not set # CONFIG_SENSORS_SMSC47M1 is not set @@ -956,12 +1041,14 @@ CONFIG_SENSORS_LM75=y # CONFIG_SENSORS_W83627HF is not set # CONFIG_SENSORS_W83627EHF is not set # CONFIG_HWMON_DEBUG_CHIP is not set +# CONFIG_THERMAL is not set +# CONFIG_THERMAL_HWMON is not set # CONFIG_WATCHDOG is not set +CONFIG_SSB_POSSIBLE=y # # Sonics Silicon Backplane # -CONFIG_SSB_POSSIBLE=y # CONFIG_SSB is not set # @@ -970,9 +1057,12 @@ CONFIG_SSB_POSSIBLE=y # CONFIG_MFD_CORE is not set # CONFIG_MFD_SM501 is not set # CONFIG_HTC_PASIC3 is not set +# CONFIG_TWL4030_CORE is not set # CONFIG_MFD_TMIO is not set -# CONFIG_MFD_T7L66XB is not set -# CONFIG_MFD_TC6387XB is not set +# CONFIG_PMIC_DA903X is not set +# CONFIG_MFD_WM8400 is not set +# CONFIG_MFD_WM8350_I2C is not set +# CONFIG_MFD_PCF50633 is not set # # Multimedia devices @@ -1013,9 +1103,36 @@ CONFIG_HID=y # USB Input Devices # CONFIG_USB_HID=y -# CONFIG_USB_HIDINPUT_POWERBOOK is not set -# CONFIG_HID_FF is not set +# CONFIG_HID_PID is not set # CONFIG_USB_HIDDEV is not set + +# +# Special HID drivers +# +# CONFIG_HID_A4TECH is not set +# CONFIG_HID_APPLE is not set +# CONFIG_HID_BELKIN is not set +# CONFIG_HID_CHERRY is not set +# CONFIG_HID_CHICONY is not set +# CONFIG_HID_CYPRESS is not set +# CONFIG_DRAGONRISE_FF is not set +# CONFIG_HID_EZKEY is not set +# CONFIG_HID_KYE is not set +# CONFIG_HID_GYRATION is not set +# CONFIG_HID_KENSINGTON is not set +# CONFIG_HID_LOGITECH is not set +# CONFIG_HID_MICROSOFT is not set +# CONFIG_HID_MONTEREY is not set +# CONFIG_HID_NTRIG is not set +# CONFIG_HID_PANTHERLORD is not set +# CONFIG_HID_PETALYNX is not set +# CONFIG_HID_SAMSUNG is not set +# CONFIG_HID_SONY is not set +# CONFIG_HID_SUNPLUS is not set +# CONFIG_GREENASIA_FF is not set +# CONFIG_HID_TOPSEED is not set +# CONFIG_THRUSTMASTER_FF is not set +# CONFIG_ZEROPLUS_FF is not set CONFIG_USB_SUPPORT=y CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB_ARCH_HAS_OHCI=y @@ -1030,10 +1147,13 @@ CONFIG_USB=y CONFIG_USB_DEVICEFS=y CONFIG_USB_DEVICE_CLASS=y # CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_SUSPEND is not set # CONFIG_USB_OTG is not set # CONFIG_USB_OTG_WHITELIST is not set # CONFIG_USB_OTG_BLACKLIST_HUB is not set # CONFIG_USB_MON is not set +# CONFIG_USB_WUSB is not set +# CONFIG_USB_WUSB_CBAF is not set # # USB Host Controller Drivers @@ -1042,12 +1162,15 @@ CONFIG_USB_DEVICE_CLASS=y CONFIG_USB_EHCI_HCD=y CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y +# CONFIG_USB_OXU210HP_HCD is not set # CONFIG_USB_ISP116X_HCD is not set # CONFIG_USB_ISP1760_HCD is not set # CONFIG_USB_OHCI_HCD is not set # CONFIG_USB_UHCI_HCD is not set # CONFIG_USB_SL811_HCD is not set # CONFIG_USB_R8A66597_HCD is not set +# CONFIG_USB_WHCI_HCD is not set +# CONFIG_USB_HWA_HCD is not set # # USB Device Class drivers @@ -1055,20 +1178,20 @@ CONFIG_USB_EHCI_TT_NEWSCHED=y # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=y # CONFIG_USB_WDM is not set +# CONFIG_USB_TMC is not set # -# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' +# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may # # -# may also be needed; see USB_STORAGE Help for more information +# also be needed; see USB_STORAGE Help for more info # CONFIG_USB_STORAGE=y # CONFIG_USB_STORAGE_DEBUG is not set CONFIG_USB_STORAGE_DATAFAB=y CONFIG_USB_STORAGE_FREECOM=y # CONFIG_USB_STORAGE_ISD200 is not set -CONFIG_USB_STORAGE_DPCM=y # CONFIG_USB_STORAGE_USBAT is not set CONFIG_USB_STORAGE_SDDR09=y CONFIG_USB_STORAGE_SDDR55=y @@ -1076,7 +1199,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_STORAGE_ALAUDA is not set # CONFIG_USB_STORAGE_ONETOUCH is not set # CONFIG_USB_STORAGE_KARMA is not set -# CONFIG_USB_STORAGE_SIERRA is not set # CONFIG_USB_STORAGE_CYPRESS_ATACB is not set # CONFIG_USB_LIBUSUAL is not set @@ -1097,6 +1219,7 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_EMI62 is not set # CONFIG_USB_EMI26 is not set # CONFIG_USB_ADUTUX is not set +# CONFIG_USB_SEVSEG is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_LEGOTOWER is not set # CONFIG_USB_LCD is not set @@ -1104,7 +1227,6 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_LED is not set # CONFIG_USB_CYPRESS_CY7C63 is not set # CONFIG_USB_CYTHERM is not set -# CONFIG_USB_PHIDGET is not set # CONFIG_USB_IDMOUSE is not set # CONFIG_USB_FTDI_ELAN is not set # CONFIG_USB_APPLEDISPLAY is not set @@ -1114,8 +1236,18 @@ CONFIG_USB_STORAGE_JUMPSHOT=y # CONFIG_USB_IOWARRIOR is not set # CONFIG_USB_TEST is not set # CONFIG_USB_ISIGHTFW is not set +# CONFIG_USB_VST is not set # CONFIG_USB_GADGET is not set + +# +# OTG and related infrastructure +# +# CONFIG_USB_GPIO_VBUS is not set +# CONFIG_NOP_USB_XCEIV is not set +# CONFIG_UWB is not set # CONFIG_MMC is not set +# CONFIG_MEMSTICK is not set +# CONFIG_ACCESSIBILITY is not set CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y @@ -1124,7 +1256,10 @@ CONFIG_LEDS_CLASS=y # # CONFIG_LEDS_PCA9532 is not set CONFIG_LEDS_GPIO=y +CONFIG_LEDS_GPIO_PLATFORM=y +# CONFIG_LEDS_LP5521 is not set # CONFIG_LEDS_PCA955X is not set +# CONFIG_LEDS_BD2802 is not set # # LED Triggers @@ -1132,7 +1267,12 @@ CONFIG_LEDS_GPIO=y CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=y CONFIG_LEDS_TRIGGER_HEARTBEAT=y +# CONFIG_LEDS_TRIGGER_BACKLIGHT is not set CONFIG_LEDS_TRIGGER_DEFAULT_ON=y + +# +# iptables trigger is under Netfilter config (LED target) +# CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y @@ -1164,6 +1304,7 @@ CONFIG_RTC_DRV_M41T80=y # CONFIG_RTC_DRV_M41T80_WDT is not set CONFIG_RTC_DRV_S35390A=y # CONFIG_RTC_DRV_FM3130 is not set +# CONFIG_RTC_DRV_RX8581 is not set # # SPI RTC drivers @@ -1173,12 +1314,15 @@ CONFIG_RTC_DRV_S35390A=y # Platform RTC drivers # # CONFIG_RTC_DRV_CMOS is not set +# CONFIG_RTC_DRV_DS1286 is not set # CONFIG_RTC_DRV_DS1511 is not set # CONFIG_RTC_DRV_DS1553 is not set # CONFIG_RTC_DRV_DS1742 is not set # CONFIG_RTC_DRV_STK17TA8 is not set CONFIG_RTC_DRV_M48T86=y +# CONFIG_RTC_DRV_M48T35 is not set # CONFIG_RTC_DRV_M48T59 is not set +# CONFIG_RTC_DRV_BQ4802 is not set # CONFIG_RTC_DRV_V3020 is not set # @@ -1196,16 +1340,12 @@ CONFIG_DMA_ENGINE=y # DMA Clients # # CONFIG_NET_DMA is not set +# CONFIG_ASYNC_TX_DMA is not set # CONFIG_DMATEST is not set - -# -# Voltage and Current regulators -# +# CONFIG_AUXDISPLAY is not set # CONFIG_REGULATOR is not set -# CONFIG_REGULATOR_FIXED_VOLTAGE is not set -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -# CONFIG_REGULATOR_BQ24022 is not set # CONFIG_UIO is not set +# CONFIG_STAGING is not set # # File systems @@ -1214,14 +1354,25 @@ CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT2_FS_XIP is not set CONFIG_EXT3_FS=y +# CONFIG_EXT3_DEFAULTS_TO_ORDERED is not set # CONFIG_EXT3_FS_XATTR is not set -# CONFIG_EXT4DEV_FS is not set +CONFIG_EXT4_FS=m +# CONFIG_EXT4DEV_COMPAT is not set +CONFIG_EXT4_FS_XATTR=y +# CONFIG_EXT4_FS_POSIX_ACL is not set +# CONFIG_EXT4_FS_SECURITY is not set CONFIG_JBD=y +# CONFIG_JBD_DEBUG is not set +CONFIG_JBD2=m +# CONFIG_JBD2_DEBUG is not set +CONFIG_FS_MBCACHE=m # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_FS_POSIX_ACL is not set +CONFIG_FILE_LOCKING=y # CONFIG_XFS_FS is not set # CONFIG_OCFS2_FS is not set +# CONFIG_BTRFS_FS is not set CONFIG_DNOTIFY=y CONFIG_INOTIFY=y CONFIG_INOTIFY_USER=y @@ -1231,6 +1382,11 @@ CONFIG_INOTIFY_USER=y # CONFIG_FUSE_FS is not set # +# Caches +# +# CONFIG_FSCACHE is not set + +# # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m @@ -1254,15 +1410,13 @@ CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" # CONFIG_PROC_FS=y CONFIG_PROC_SYSCTL=y +CONFIG_PROC_PAGE_MONITOR=y CONFIG_SYSFS=y CONFIG_TMPFS=y # CONFIG_TMPFS_POSIX_ACL is not set # CONFIG_HUGETLB_PAGE is not set # CONFIG_CONFIGFS_FS is not set - -# -# Miscellaneous filesystems -# +CONFIG_MISC_FILESYSTEMS=y # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set @@ -1282,6 +1436,7 @@ CONFIG_JFFS2_ZLIB=y CONFIG_JFFS2_RTIME=y # CONFIG_JFFS2_RUBIN is not set CONFIG_CRAMFS=y +# CONFIG_SQUASHFS is not set # CONFIG_VXFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_OMFS_FS is not set @@ -1290,6 +1445,7 @@ CONFIG_CRAMFS=y # CONFIG_ROMFS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set +# CONFIG_NILFS2_FS is not set CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V3=y @@ -1381,13 +1537,16 @@ CONFIG_ENABLE_MUST_CHECK=y CONFIG_FRAME_WARN=1024 CONFIG_MAGIC_SYSRQ=y # CONFIG_UNUSED_SYMBOLS is not set -# CONFIG_DEBUG_FS is not set +CONFIG_DEBUG_FS=y # CONFIG_HEADERS_CHECK is not set CONFIG_DEBUG_KERNEL=y # CONFIG_DEBUG_SHIRQ is not set CONFIG_DETECT_SOFTLOCKUP=y # CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC is not set CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=0 +CONFIG_DETECT_HUNG_TASK=y +# CONFIG_BOOTPARAM_HUNG_TASK_PANIC is not set +CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=0 CONFIG_SCHED_DEBUG=y CONFIG_SCHEDSTATS=y # CONFIG_TIMER_STATS is not set @@ -1411,25 +1570,46 @@ CONFIG_DEBUG_INFO=y # CONFIG_DEBUG_MEMORY_INIT is not set # CONFIG_DEBUG_LIST is not set # CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set CONFIG_FRAME_POINTER=y # CONFIG_BOOT_PRINTK_DELAY is not set # CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_CPU_STALL_DETECTOR is not set # CONFIG_KPROBES_SANITY_TEST is not set # CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set # CONFIG_LKDTM is not set # CONFIG_FAULT_INJECTION is not set CONFIG_LATENCYTOP=y CONFIG_SYSCTL_SYSCALL_CHECK=y -CONFIG_HAVE_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -# CONFIG_FTRACE is not set +# CONFIG_PAGE_POISONING is not set +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_RING_BUFFER=y +CONFIG_TRACING=y +CONFIG_TRACING_SUPPORT=y + +# +# Tracers +# +# CONFIG_FUNCTION_TRACER is not set # CONFIG_IRQSOFF_TRACER is not set # CONFIG_PREEMPT_TRACER is not set # CONFIG_SCHED_TRACER is not set # CONFIG_CONTEXT_SWITCH_TRACER is not set +# CONFIG_EVENT_TRACER is not set +# CONFIG_BOOT_TRACER is not set +# CONFIG_TRACE_BRANCH_PROFILING is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_KMEMTRACE is not set +# CONFIG_WORKQUEUE_TRACER is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_DYNAMIC_DEBUG is not set # CONFIG_SAMPLES is not set CONFIG_HAVE_ARCH_KGDB=y # CONFIG_KGDB is not set +CONFIG_ARM_UNWIND=y CONFIG_DEBUG_USER=y CONFIG_DEBUG_ERRORS=y # CONFIG_DEBUG_STACK_USAGE is not set @@ -1441,18 +1621,27 @@ CONFIG_DEBUG_LL=y # # CONFIG_KEYS is not set # CONFIG_SECURITY is not set +# CONFIG_SECURITYFS is not set # CONFIG_SECURITY_FILE_CAPABILITIES is not set -CONFIG_ASYNC_CORE=y CONFIG_CRYPTO=y # # Crypto core or helper # +# CONFIG_CRYPTO_FIPS is not set CONFIG_CRYPTO_ALGAPI=m +CONFIG_CRYPTO_ALGAPI2=m +CONFIG_CRYPTO_AEAD2=m CONFIG_CRYPTO_BLKCIPHER=m +CONFIG_CRYPTO_BLKCIPHER2=m +CONFIG_CRYPTO_HASH2=m +CONFIG_CRYPTO_RNG2=m +CONFIG_CRYPTO_PCOMP=m CONFIG_CRYPTO_MANAGER=m +CONFIG_CRYPTO_MANAGER2=m # CONFIG_CRYPTO_GF128MUL is not set # CONFIG_CRYPTO_NULL is not set +CONFIG_CRYPTO_WORKQUEUE=m # CONFIG_CRYPTO_CRYPTD is not set # CONFIG_CRYPTO_AUTHENC is not set # CONFIG_CRYPTO_TEST is not set @@ -1521,18 +1710,24 @@ CONFIG_CRYPTO_PCBC=m # Compression # # CONFIG_CRYPTO_DEFLATE is not set +# CONFIG_CRYPTO_ZLIB is not set # CONFIG_CRYPTO_LZO is not set + +# +# Random Number Generation +# +# CONFIG_CRYPTO_ANSI_CPRNG is not set CONFIG_CRYPTO_HW=y # CONFIG_CRYPTO_DEV_HIFN_795X is not set +CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_BITREVERSE=y -# CONFIG_GENERIC_FIND_FIRST_BIT is not set -# CONFIG_GENERIC_FIND_NEXT_BIT is not set +CONFIG_GENERIC_FIND_LAST_BIT=y # CONFIG_CRC_CCITT is not set -# CONFIG_CRC16 is not set +CONFIG_CRC16=m CONFIG_CRC_T10DIF=y CONFIG_CRC_ITU_T=m CONFIG_CRC32=y @@ -1540,7 +1735,7 @@ CONFIG_CRC32=y # CONFIG_LIBCRC32C is not set CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y -CONFIG_PLIST=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT=y CONFIG_HAS_DMA=y +CONFIG_NLATTR=y diff --git a/arch/arm/include/asm/elf.h b/arch/arm/include/asm/elf.h index d7da19bcf92..c207504de84 100644 --- a/arch/arm/include/asm/elf.h +++ b/arch/arm/include/asm/elf.h @@ -45,13 +45,15 @@ typedef struct user_fp elf_fpregset_t; #define EF_ARM_HASENTRY 0x00000002 /* All */ #define EF_ARM_RELEXEC 0x00000001 /* All */ -#define R_ARM_NONE 0 -#define R_ARM_PC24 1 -#define R_ARM_ABS32 2 -#define R_ARM_CALL 28 -#define R_ARM_JUMP24 29 -#define R_ARM_V4BX 40 -#define R_ARM_PREL31 42 +#define R_ARM_NONE 0 +#define R_ARM_PC24 1 +#define R_ARM_ABS32 2 +#define R_ARM_CALL 28 +#define R_ARM_JUMP24 29 +#define R_ARM_V4BX 40 +#define R_ARM_PREL31 42 +#define R_ARM_MOVW_ABS_NC 43 +#define R_ARM_MOVT_ABS 44 /* * These are used to set parameters in the core dumps. diff --git a/arch/arm/kernel/module.c b/arch/arm/kernel/module.c index d1731e39b49..bac03c81489 100644 --- a/arch/arm/kernel/module.c +++ b/arch/arm/kernel/module.c @@ -169,6 +169,21 @@ apply_relocate(Elf32_Shdr *sechdrs, const char *strtab, unsigned int symindex, *(u32 *)loc = offset & 0x7fffffff; break; + case R_ARM_MOVW_ABS_NC: + case R_ARM_MOVT_ABS: + offset = *(u32 *)loc; + offset = ((offset & 0xf0000) >> 4) | (offset & 0xfff); + offset = (offset ^ 0x8000) - 0x8000; + + offset += sym->st_value; + if (ELF32_R_TYPE(rel->r_info) == R_ARM_MOVT_ABS) + offset >>= 16; + + *(u32 *)loc &= 0xfff0f000; + *(u32 *)loc |= ((offset & 0xf000) << 4) | + (offset & 0x0fff); + break; + default: printk(KERN_ERR "%s: unknown relocation: %u\n", module->name, ELF32_R_TYPE(rel->r_info)); diff --git a/arch/arm/mach-davinci/board-dm644x-evm.c b/arch/arm/mach-davinci/board-dm644x-evm.c index c039674fe99..b2e7f9c63bc 100644 --- a/arch/arm/mach-davinci/board-dm644x-evm.c +++ b/arch/arm/mach-davinci/board-dm644x-evm.c @@ -211,7 +211,7 @@ static struct resource ide_resources[] = { }, }; -static u64 ide_dma_mask = DMA_32BIT_MASK; +static u64 ide_dma_mask = DMA_BIT_MASK(32); static struct platform_device ide_dev = { .name = "palm_bk3710", @@ -220,7 +220,7 @@ static struct platform_device ide_dev = { .num_resources = ARRAY_SIZE(ide_resources), .dev = { .dma_mask = &ide_dma_mask, - .coherent_dma_mask = DMA_32BIT_MASK, + .coherent_dma_mask = DMA_BIT_MASK(32), }, }; diff --git a/arch/arm/mach-pxa/Kconfig b/arch/arm/mach-pxa/Kconfig index 3e66d9099ea..17d3fbd368a 100644 --- a/arch/arm/mach-pxa/Kconfig +++ b/arch/arm/mach-pxa/Kconfig @@ -289,12 +289,12 @@ config MACH_LITTLETON config MACH_TAVOREVB bool "PXA930 Evaluation Board (aka TavorEVB)" select PXA3xx - select PXA930 + select CPU_PXA930 config MACH_SAAR bool "PXA930 Handheld Platform (aka SAAR)" select PXA3xx - select PXA930 + select CPU_PXA930 config MACH_ARMCORE bool "CompuLab CM-X255/CM-X270 modules" diff --git a/arch/arm/mach-s3c2412/pm.c b/arch/arm/mach-s3c2412/pm.c index c9cfe40e21f..a7417c479ff 100644 --- a/arch/arm/mach-s3c2412/pm.c +++ b/arch/arm/mach-s3c2412/pm.c @@ -21,6 +21,7 @@ #include <linux/io.h> #include <mach/hardware.h> +#include <asm/cacheflush.h> #include <asm/irq.h> #include <mach/regs-power.h> @@ -39,6 +40,8 @@ static void s3c2412_cpu_suspend(void) { unsigned long tmp; + flush_cache_all(); + /* set our standby method to sleep */ tmp = __raw_readl(S3C2412_PWRCFG); diff --git a/arch/arm/mach-s3c6400/include/mach/map.h b/arch/arm/mach-s3c6400/include/mach/map.h index baf1c0f1ea5..8199972ed5b 100644 --- a/arch/arm/mach-s3c6400/include/mach/map.h +++ b/arch/arm/mach-s3c6400/include/mach/map.h @@ -40,6 +40,8 @@ #define S3C64XX_PA_FB (0x77100000) #define S3C64XX_PA_SYSCON (0x7E00F000) +#define S3C64XX_PA_IIS0 (0x7F002000) +#define S3C64XX_PA_IIS1 (0x7F003000) #define S3C64XX_PA_TIMER (0x7F006000) #define S3C64XX_PA_IIC0 (0x7F004000) #define S3C64XX_PA_IIC1 (0x7F00F000) diff --git a/arch/arm/plat-mxc/dma-mx1-mx2.c b/arch/arm/plat-mxc/dma-mx1-mx2.c index e364a5ed10f..77646436c00 100644 --- a/arch/arm/plat-mxc/dma-mx1-mx2.c +++ b/arch/arm/plat-mxc/dma-mx1-mx2.c @@ -693,12 +693,15 @@ int imx_dma_request(int channel, const char *name) local_irq_restore(flags); return -EBUSY; } + memset(imxdma, 0, sizeof(imxdma)); + imxdma->name = name; + local_irq_restore(flags); /* request_irq() can block */ #ifdef CONFIG_ARCH_MX2 ret = request_irq(MXC_INT_DMACH0 + channel, dma_irq_handler, 0, "DMA", NULL); if (ret) { - local_irq_restore(flags); + imxdma->name = NULL; printk(KERN_CRIT "Can't register IRQ %d for DMA channel %d\n", MXC_INT_DMACH0 + channel, channel); return ret; @@ -708,13 +711,6 @@ int imx_dma_request(int channel, const char *name) imxdma->watchdog.data = channel; #endif - imxdma->name = name; - imxdma->irq_handler = NULL; - imxdma->err_handler = NULL; - imxdma->data = NULL; - imxdma->sg = NULL; - - local_irq_restore(flags); return ret; } EXPORT_SYMBOL(imx_dma_request); @@ -737,10 +733,7 @@ void imx_dma_free(int channel) local_irq_save(flags); /* Disable interrupts */ - __raw_writel(__raw_readl(DMA_BASE + DMA_DIMR) | (1 << channel), - DMA_BASE + DMA_DIMR); - __raw_writel(__raw_readl(DMA_BASE + DMA_CCR(channel)) & ~CCR_CEN, - DMA_BASE + DMA_CCR(channel)); + imx_dma_disable(channel); imxdma->name = NULL; #ifdef CONFIG_ARCH_MX2 diff --git a/arch/arm/plat-mxc/gpio.c b/arch/arm/plat-mxc/gpio.c index c6483bad8a2..89e95798cc3 100644 --- a/arch/arm/plat-mxc/gpio.c +++ b/arch/arm/plat-mxc/gpio.c @@ -124,7 +124,7 @@ static void mx3_gpio_irq_handler(u32 irq, struct irq_desc *desc) irq_stat = __raw_readl(port->base + GPIO_ISR) & __raw_readl(port->base + GPIO_IMR); - BUG_ON(!irq_stat); + mxc_gpio_irq_handler(port, irq_stat); } #endif diff --git a/arch/arm/plat-mxc/include/mach/board-mx27ads.h b/arch/arm/plat-mxc/include/mach/board-mx27ads.h index 1cac9d1135c..d42f4e6116f 100644 --- a/arch/arm/plat-mxc/include/mach/board-mx27ads.h +++ b/arch/arm/plat-mxc/include/mach/board-mx27ads.h @@ -47,7 +47,7 @@ /* * Base address of PBC controller, CS4 */ -#define PBC_BASE_ADDRESS 0xEB000000 +#define PBC_BASE_ADDRESS 0xf4300000 #define PBC_REG_ADDR(offset) (void __force __iomem *) \ (PBC_BASE_ADDRESS + (offset)) diff --git a/arch/ia64/include/asm/idle.h b/arch/ia64/include/asm/idle.h new file mode 100644 index 00000000000..b7685015a8b --- /dev/null +++ b/arch/ia64/include/asm/idle.h @@ -0,0 +1,7 @@ +#ifndef _ASM_IA64_IDLE_H +#define _ASM_IA64_IDLE_H + +static inline void enter_idle(void) { } +static inline void exit_idle(void) { } + +#endif /* _ASM_IA64_IDLE_H */ diff --git a/arch/ia64/include/asm/xen/events.h b/arch/ia64/include/asm/xen/events.h index 73248781fba..b8370c8b619 100644 --- a/arch/ia64/include/asm/xen/events.h +++ b/arch/ia64/include/asm/xen/events.h @@ -36,14 +36,9 @@ static inline int xen_irqs_disabled(struct pt_regs *regs) return !(ia64_psr(regs)->i); } -static inline void xen_do_IRQ(int irq, struct pt_regs *regs) +static inline void handle_irq(int irq, struct pt_regs *regs) { - struct pt_regs *old_regs; - old_regs = set_irq_regs(regs); - irq_enter(); __do_IRQ(irq); - irq_exit(); - set_irq_regs(old_regs); } #define irq_ctx_init(cpu) do { } while (0) diff --git a/arch/ia64/xen/xensetup.S b/arch/ia64/xen/xensetup.S index 28fed1fcc07..aff8346ea19 100644 --- a/arch/ia64/xen/xensetup.S +++ b/arch/ia64/xen/xensetup.S @@ -54,8 +54,6 @@ END(startup_xen) #define isBP p3 // are we the Bootstrap Processor? - .text - GLOBAL_ENTRY(xen_setup_hook) mov r8=XEN_PV_DOMAIN_ASM (isBP) movl r9=xen_domain_type;; diff --git a/arch/powerpc/kernel/cputable.c b/arch/powerpc/kernel/cputable.c index cd1b687544f..f9c40f869c6 100644 --- a/arch/powerpc/kernel/cputable.c +++ b/arch/powerpc/kernel/cputable.c @@ -382,7 +382,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .machine_check = machine_check_generic, - .oprofile_cpu_type = "ppc64/compat-power5+", + .oprofile_cpu_type = "ppc64/ibm-compat-v1", + .oprofile_type = PPC_OPROFILE_POWER4, .platform = "power5+", }, { /* Power6 */ @@ -416,7 +417,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .machine_check = machine_check_generic, - .oprofile_cpu_type = "ppc64/compat-power6", + .oprofile_cpu_type = "ppc64/ibm-compat-v1", + .oprofile_type = PPC_OPROFILE_POWER4, .platform = "power6", }, { /* 2.06-compliant processor, i.e. Power7 "architected" mode */ @@ -429,7 +431,8 @@ static struct cpu_spec __initdata cpu_specs[] = { .icache_bsize = 128, .dcache_bsize = 128, .machine_check = machine_check_generic, - .oprofile_cpu_type = "ppc64/compat-power7", + .oprofile_type = PPC_OPROFILE_POWER4, + .oprofile_cpu_type = "ppc64/ibm-compat-v1", .platform = "power7", }, { /* Power7 */ @@ -1833,8 +1836,10 @@ static void __init setup_cpu_spec(unsigned long offset, struct cpu_spec *s) * and, in that case, keep the current value for * oprofile_cpu_type. */ - if (old.oprofile_cpu_type == NULL) - t->oprofile_cpu_type = s->oprofile_cpu_type; + if (old.oprofile_cpu_type == NULL) { + t->oprofile_cpu_type = old.oprofile_cpu_type; + t->oprofile_type = old.oprofile_type; + } } *PTRRELOC(&cur_cpu_spec) = &the_cpu_spec; diff --git a/arch/x86/kernel/amd_iommu_init.c b/arch/x86/kernel/amd_iommu_init.c index 42c33cebf00..8c0be0902da 100644 --- a/arch/x86/kernel/amd_iommu_init.c +++ b/arch/x86/kernel/amd_iommu_init.c @@ -49,10 +49,10 @@ #define IVHD_DEV_EXT_SELECT 0x46 #define IVHD_DEV_EXT_SELECT_RANGE 0x47 -#define IVHD_FLAG_HT_TUN_EN 0x00 -#define IVHD_FLAG_PASSPW_EN 0x01 -#define IVHD_FLAG_RESPASSPW_EN 0x02 -#define IVHD_FLAG_ISOC_EN 0x03 +#define IVHD_FLAG_HT_TUN_EN_MASK 0x01 +#define IVHD_FLAG_PASSPW_EN_MASK 0x02 +#define IVHD_FLAG_RESPASSPW_EN_MASK 0x04 +#define IVHD_FLAG_ISOC_EN_MASK 0x08 #define IVMD_FLAG_EXCL_RANGE 0x08 #define IVMD_FLAG_UNITY_MAP 0x01 @@ -569,19 +569,19 @@ static void __init init_iommu_from_acpi(struct amd_iommu *iommu, * First set the recommended feature enable bits from ACPI * into the IOMMU control registers */ - h->flags & IVHD_FLAG_HT_TUN_EN ? + h->flags & IVHD_FLAG_HT_TUN_EN_MASK ? iommu_feature_enable(iommu, CONTROL_HT_TUN_EN) : iommu_feature_disable(iommu, CONTROL_HT_TUN_EN); - h->flags & IVHD_FLAG_PASSPW_EN ? + h->flags & IVHD_FLAG_PASSPW_EN_MASK ? iommu_feature_enable(iommu, CONTROL_PASSPW_EN) : iommu_feature_disable(iommu, CONTROL_PASSPW_EN); - h->flags & IVHD_FLAG_RESPASSPW_EN ? + h->flags & IVHD_FLAG_RESPASSPW_EN_MASK ? iommu_feature_enable(iommu, CONTROL_RESPASSPW_EN) : iommu_feature_disable(iommu, CONTROL_RESPASSPW_EN); - h->flags & IVHD_FLAG_ISOC_EN ? + h->flags & IVHD_FLAG_ISOC_EN_MASK ? iommu_feature_enable(iommu, CONTROL_ISOC_EN) : iommu_feature_disable(iommu, CONTROL_ISOC_EN); diff --git a/arch/x86/kernel/cpu/common.c b/arch/x86/kernel/cpu/common.c index c4f667896c2..c1caefc82e6 100644 --- a/arch/x86/kernel/cpu/common.c +++ b/arch/x86/kernel/cpu/common.c @@ -1203,6 +1203,8 @@ void __cpuinit cpu_init(void) load_TR_desc(); load_LDT(&init_mm.context); + t->x86_tss.io_bitmap_base = offsetof(struct tss_struct, io_bitmap); + #ifdef CONFIG_DOUBLEFAULT /* Set up doublefault TSS pointer in the GDT */ __set_tss_desc(cpu, GDT_ENTRY_DOUBLEFAULT_TSS, &doublefault_tss); diff --git a/arch/x86/kernel/cpu/proc.c b/arch/x86/kernel/cpu/proc.c index f93047fed79..d5e30397246 100644 --- a/arch/x86/kernel/cpu/proc.c +++ b/arch/x86/kernel/cpu/proc.c @@ -14,7 +14,7 @@ static void show_cpuinfo_core(struct seq_file *m, struct cpuinfo_x86 *c, if (c->x86_max_cores * smp_num_siblings > 1) { seq_printf(m, "physical id\t: %d\n", c->phys_proc_id); seq_printf(m, "siblings\t: %d\n", - cpumask_weight(cpu_sibling_mask(cpu))); + cpumask_weight(cpu_core_mask(cpu))); seq_printf(m, "core id\t\t: %d\n", c->cpu_core_id); seq_printf(m, "cpu cores\t: %d\n", c->booted_cores); seq_printf(m, "apicid\t\t: %d\n", c->apicid); diff --git a/arch/x86/mm/kmmio.c b/arch/x86/mm/kmmio.c index 4f115e00486..50dc802a1c4 100644 --- a/arch/x86/mm/kmmio.c +++ b/arch/x86/mm/kmmio.c @@ -87,7 +87,7 @@ static struct kmmio_probe *get_kmmio_probe(unsigned long addr) { struct kmmio_probe *p; list_for_each_entry_rcu(p, &kmmio_probes, list) { - if (addr >= p->addr && addr <= (p->addr + p->len)) + if (addr >= p->addr && addr < (p->addr + p->len)) return p; } return NULL; diff --git a/arch/x86/vdso/vclock_gettime.c b/arch/x86/vdso/vclock_gettime.c index d9d35824c56..6a40b78b46a 100644 --- a/arch/x86/vdso/vclock_gettime.c +++ b/arch/x86/vdso/vclock_gettime.c @@ -104,11 +104,13 @@ notrace int __vdso_gettimeofday(struct timeval *tv, struct timezone *tz) { long ret; if (likely(gtod->sysctl_enabled && gtod->clock.vread)) { - BUILD_BUG_ON(offsetof(struct timeval, tv_usec) != - offsetof(struct timespec, tv_nsec) || - sizeof(*tv) != sizeof(struct timespec)); - do_realtime((struct timespec *)tv); - tv->tv_usec /= 1000; + if (likely(tv != NULL)) { + BUILD_BUG_ON(offsetof(struct timeval, tv_usec) != + offsetof(struct timespec, tv_nsec) || + sizeof(*tv) != sizeof(struct timespec)); + do_realtime((struct timespec *)tv); + tv->tv_usec /= 1000; + } if (unlikely(tz != NULL)) { /* Avoid memcpy. Some old compilers fail to inline it */ tz->tz_minuteswest = gtod->sys_tz.tz_minuteswest; diff --git a/drivers/base/iommu.c b/drivers/base/iommu.c index 9f0e672f4be..8ad4ffea692 100644 --- a/drivers/base/iommu.c +++ b/drivers/base/iommu.c @@ -18,6 +18,8 @@ #include <linux/bug.h> #include <linux/types.h> +#include <linux/module.h> +#include <linux/slab.h> #include <linux/errno.h> #include <linux/iommu.h> diff --git a/drivers/char/random.c b/drivers/char/random.c index f824ef8a927..b2ced39d76b 100644 --- a/drivers/char/random.c +++ b/drivers/char/random.c @@ -1665,15 +1665,20 @@ EXPORT_SYMBOL(secure_dccp_sequence_number); * value is not cryptographically secure but for several uses the cost of * depleting entropy is too high */ +DEFINE_PER_CPU(__u32 [4], get_random_int_hash); unsigned int get_random_int(void) { - /* - * Use IP's RNG. It suits our purpose perfectly: it re-keys itself - * every second, from the entropy pool (and thus creates a limited - * drain on it), and uses halfMD4Transform within the second. We - * also mix it with jiffies and the PID: - */ - return secure_ip_id((__force __be32)(current->pid + jiffies)); + struct keydata *keyptr; + __u32 *hash = get_cpu_var(get_random_int_hash); + int ret; + + keyptr = get_keyptr(); + hash[0] += current->pid + jiffies + get_cycles() + (int)(long)&ret; + + ret = half_md4_transform(hash, keyptr->secret); + put_cpu_var(get_random_int_hash); + + return ret; } /* diff --git a/drivers/char/vt_ioctl.c b/drivers/char/vt_ioctl.c index a2dee0eb6da..e6ce632a393 100644 --- a/drivers/char/vt_ioctl.c +++ b/drivers/char/vt_ioctl.c @@ -400,6 +400,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, case KIOCSOUND: if (!perm) goto eperm; + /* FIXME: This is an old broken API but we need to keep it + supported and somehow separate the historic advertised + tick rate from any real one */ if (arg) arg = CLOCK_TICK_RATE / arg; kd_mksound(arg, 0); @@ -417,6 +420,9 @@ int vt_ioctl(struct tty_struct *tty, struct file * file, */ ticks = HZ * ((arg >> 16) & 0xffff) / 1000; count = ticks ? (arg & 0xffff) : 0; + /* FIXME: This is an old broken API but we need to keep it + supported and somehow separate the historic advertised + tick rate from any real one */ if (count) count = CLOCK_TICK_RATE / count; kd_mksound(count, ticks); diff --git a/drivers/gpu/drm/drm_crtc_helper.c b/drivers/gpu/drm/drm_crtc_helper.c index a04639dc633..45890447fee 100644 --- a/drivers/gpu/drm/drm_crtc_helper.c +++ b/drivers/gpu/drm/drm_crtc_helper.c @@ -561,7 +561,6 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, int saved_x, saved_y; struct drm_encoder *encoder; bool ret = true; - bool depth_changed, bpp_changed; adjusted_mode = drm_mode_duplicate(dev, mode); @@ -570,15 +569,6 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, if (!crtc->enabled) return true; - if (old_fb && crtc->fb) { - depth_changed = (old_fb->depth != crtc->fb->depth); - bpp_changed = (old_fb->bits_per_pixel != - crtc->fb->bits_per_pixel); - } else { - depth_changed = true; - bpp_changed = true; - } - saved_mode = crtc->mode; saved_x = crtc->x; saved_y = crtc->y; @@ -590,15 +580,6 @@ bool drm_crtc_helper_set_mode(struct drm_crtc *crtc, crtc->x = x; crtc->y = y; - if (drm_mode_equal(&saved_mode, &crtc->mode)) { - if (saved_x != crtc->x || saved_y != crtc->y || - depth_changed || bpp_changed) { - ret = !crtc_funcs->mode_set_base(crtc, crtc->x, crtc->y, - old_fb); - goto done; - } - } - /* Pass our mode to the connectors and the CRTC to give them a chance to * adjust it according to limitations or connector properties, and also * a chance to reject the mode entirely. diff --git a/drivers/gpu/drm/drm_drv.c b/drivers/gpu/drm/drm_drv.c index c4ada8b6295..f01def16a66 100644 --- a/drivers/gpu/drm/drm_drv.c +++ b/drivers/gpu/drm/drm_drv.c @@ -456,7 +456,8 @@ int drm_ioctl(struct inode *inode, struct file *filp, retcode = -EINVAL; } else if (((ioctl->flags & DRM_ROOT_ONLY) && !capable(CAP_SYS_ADMIN)) || ((ioctl->flags & DRM_AUTH) && !file_priv->authenticated) || - ((ioctl->flags & DRM_MASTER) && !file_priv->is_master)) { + ((ioctl->flags & DRM_MASTER) && !file_priv->is_master) || + (!(ioctl->flags & DRM_CONTROL_ALLOW) && (file_priv->minor->type == DRM_MINOR_CONTROL))) { retcode = -EACCES; } else { if (cmd & (IOC_IN | IOC_OUT)) { diff --git a/drivers/gpu/drm/drm_stub.c b/drivers/gpu/drm/drm_stub.c index ef878615c49..b9631e3a1ea 100644 --- a/drivers/gpu/drm/drm_stub.c +++ b/drivers/gpu/drm/drm_stub.c @@ -402,14 +402,14 @@ int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent, if (dev->driver->load) { ret = dev->driver->load(dev, ent->driver_data); if (ret) - goto err_g3; + goto err_g4; } /* setup the grouping for the legacy output */ if (drm_core_check_feature(dev, DRIVER_MODESET)) { ret = drm_mode_group_init_legacy_group(dev, &dev->primary->mode_group); if (ret) - goto err_g3; + goto err_g4; } list_add_tail(&dev->driver_item, &driver->device_list); @@ -420,8 +420,11 @@ int drm_get_dev(struct pci_dev *pdev, const struct pci_device_id *ent, return 0; -err_g3: +err_g4: drm_put_minor(&dev->primary); +err_g3: + if (drm_core_check_feature(dev, DRIVER_MODESET)) + drm_put_minor(&dev->control); err_g2: pci_disable_device(pdev); err_g1: @@ -502,11 +505,11 @@ void drm_put_dev(struct drm_device *dev) dev->agp = NULL; } - drm_ht_remove(&dev->map_hash); - drm_ctxbitmap_cleanup(dev); - list_for_each_entry_safe(r_list, list_temp, &dev->maplist, head) drm_rmmap(dev, r_list->map); + drm_ht_remove(&dev->map_hash); + + drm_ctxbitmap_cleanup(dev); if (drm_core_check_feature(dev, DRIVER_MODESET)) drm_put_minor(&dev->control); diff --git a/drivers/gpu/drm/drm_sysfs.c b/drivers/gpu/drm/drm_sysfs.c index 022876ae34f..8f9372921f8 100644 --- a/drivers/gpu/drm/drm_sysfs.c +++ b/drivers/gpu/drm/drm_sysfs.c @@ -489,9 +489,7 @@ int drm_sysfs_device_add(struct drm_minor *minor) return 0; - device_unregister(&minor->kdev); err_out: - return err; } diff --git a/drivers/gpu/drm/r128/r128_cce.c b/drivers/gpu/drm/r128/r128_cce.c index 32de4cedc36..077c0455a6b 100644 --- a/drivers/gpu/drm/r128/r128_cce.c +++ b/drivers/gpu/drm/r128/r128_cce.c @@ -511,9 +511,9 @@ static int r128_do_init_cce(struct drm_device * dev, drm_r128_init_t * init) #if __OS_HAS_AGP if (!dev_priv->is_pci) { - drm_core_ioremap(dev_priv->cce_ring, dev); - drm_core_ioremap(dev_priv->ring_rptr, dev); - drm_core_ioremap(dev->agp_buffer_map, dev); + drm_core_ioremap_wc(dev_priv->cce_ring, dev); + drm_core_ioremap_wc(dev_priv->ring_rptr, dev); + drm_core_ioremap_wc(dev->agp_buffer_map, dev); if (!dev_priv->cce_ring->handle || !dev_priv->ring_rptr->handle || !dev->agp_buffer_map->handle) { diff --git a/drivers/gpu/drm/radeon/radeon_drv.h b/drivers/gpu/drm/radeon/radeon_drv.h index ed4d27e6ee6..8071d965f14 100644 --- a/drivers/gpu/drm/radeon/radeon_drv.h +++ b/drivers/gpu/drm/radeon/radeon_drv.h @@ -99,9 +99,10 @@ * 1.27- Add support for IGP GART * 1.28- Add support for VBL on CRTC2 * 1.29- R500 3D cmd buffer support + * 1.30- Add support for occlusion queries */ #define DRIVER_MAJOR 1 -#define DRIVER_MINOR 29 +#define DRIVER_MINOR 30 #define DRIVER_PATCHLEVEL 0 /* diff --git a/drivers/i2c/algos/i2c-algo-bit.c b/drivers/i2c/algos/i2c-algo-bit.c index d420cc5f563..e25e13980af 100644 --- a/drivers/i2c/algos/i2c-algo-bit.c +++ b/drivers/i2c/algos/i2c-algo-bit.c @@ -104,7 +104,7 @@ static int sclhi(struct i2c_algo_bit_data *adap) * chips may hold it low ("clock stretching") while they * are processing data internally. */ - if (time_after_eq(jiffies, start + adap->timeout)) + if (time_after(jiffies, start + adap->timeout)) return -ETIMEDOUT; cond_resched(); } diff --git a/drivers/i2c/algos/i2c-algo-pca.c b/drivers/i2c/algos/i2c-algo-pca.c index 6318f7ddc1d..78d42aae008 100644 --- a/drivers/i2c/algos/i2c-algo-pca.c +++ b/drivers/i2c/algos/i2c-algo-pca.c @@ -287,10 +287,21 @@ static int pca_xfer(struct i2c_adapter *i2c_adap, case 0x30: /* Data byte in I2CDAT has been transmitted; NOT ACK has been received */ DEB2("NOT ACK received after data byte\n"); + pca_stop(adap); goto out; case 0x38: /* Arbitration lost during SLA+W, SLA+R or data bytes */ DEB2("Arbitration lost\n"); + /* + * The PCA9564 data sheet (2006-09-01) says "A + * START condition will be transmitted when the + * bus becomes free (STOP or SCL and SDA high)" + * when the STA bit is set (p. 11). + * + * In case this won't work, try pca_reset() + * instead. + */ + pca_start(adap); goto out; case 0x58: /* Data byte has been received; NOT ACK has been returned */ diff --git a/drivers/i2c/busses/i2c-ali1535.c b/drivers/i2c/busses/i2c-ali1535.c index 981e080b32a..d108450df06 100644 --- a/drivers/i2c/busses/i2c-ali1535.c +++ b/drivers/i2c/busses/i2c-ali1535.c @@ -284,7 +284,7 @@ static int ali1535_transaction(struct i2c_adapter *adap) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { result = -ETIMEDOUT; dev_err(&adap->dev, "SMBus Timeout!\n"); } diff --git a/drivers/i2c/busses/i2c-ali15x3.c b/drivers/i2c/busses/i2c-ali15x3.c index 39066dee46e..d627fceb790 100644 --- a/drivers/i2c/busses/i2c-ali15x3.c +++ b/drivers/i2c/busses/i2c-ali15x3.c @@ -306,7 +306,7 @@ static int ali15x3_transaction(struct i2c_adapter *adap) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { result = -ETIMEDOUT; dev_err(&adap->dev, "SMBus Timeout!\n"); } diff --git a/drivers/i2c/busses/i2c-amd756.c b/drivers/i2c/busses/i2c-amd756.c index 220f4a1eee1..f7d6fe9c49b 100644 --- a/drivers/i2c/busses/i2c-amd756.c +++ b/drivers/i2c/busses/i2c-amd756.c @@ -126,7 +126,7 @@ static int amd756_transaction(struct i2c_adapter *adap) } while ((temp & (GS_HST_STS | GS_SMB_STS)) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "Busy wait timeout (%04x)\n", temp); goto abort; } @@ -143,7 +143,7 @@ static int amd756_transaction(struct i2c_adapter *adap) } while ((temp & GS_HST_STS) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "Completion timeout!\n"); goto abort; } diff --git a/drivers/i2c/busses/i2c-i801.c b/drivers/i2c/busses/i2c-i801.c index 10411848fd7..9d2c5adf5d4 100644 --- a/drivers/i2c/busses/i2c-i801.c +++ b/drivers/i2c/busses/i2c-i801.c @@ -237,7 +237,7 @@ static int i801_transaction(int xact) status = inb_p(SMBHSTSTS); } while ((status & SMBHSTSTS_HOST_BUSY) && (timeout++ < MAX_TIMEOUT)); - result = i801_check_post(status, timeout >= MAX_TIMEOUT); + result = i801_check_post(status, timeout > MAX_TIMEOUT); if (result < 0) return result; @@ -257,9 +257,9 @@ static void i801_wait_hwpec(void) } while ((!(status & SMBHSTSTS_INTR)) && (timeout++ < MAX_TIMEOUT)); - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) dev_dbg(&I801_dev->dev, "PEC Timeout!\n"); - } + outb_p(status, SMBHSTSTS); } @@ -344,7 +344,7 @@ static int i801_block_transaction_byte_by_byte(union i2c_smbus_data *data, while ((!(status & SMBHSTSTS_BYTE_DONE)) && (timeout++ < MAX_TIMEOUT)); - result = i801_check_post(status, timeout >= MAX_TIMEOUT); + result = i801_check_post(status, timeout > MAX_TIMEOUT); if (result < 0) return result; diff --git a/drivers/i2c/busses/i2c-isch.c b/drivers/i2c/busses/i2c-isch.c index b9c01aa9003..9f6b8e0f863 100644 --- a/drivers/i2c/busses/i2c-isch.c +++ b/drivers/i2c/busses/i2c-isch.c @@ -112,7 +112,7 @@ static int sch_transaction(void) } while ((temp & 0x08) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_err(&sch_adapter.dev, "SMBus Timeout!\n"); result = -ETIMEDOUT; } diff --git a/drivers/i2c/busses/i2c-nforce2.c b/drivers/i2c/busses/i2c-nforce2.c index 2ff4683703a..ec11d1c4e77 100644 --- a/drivers/i2c/busses/i2c-nforce2.c +++ b/drivers/i2c/busses/i2c-nforce2.c @@ -173,7 +173,7 @@ static int nforce2_check_status(struct i2c_adapter *adap) temp = inb_p(NVIDIA_SMB_STS); } while ((!temp) && (timeout++ < MAX_TIMEOUT)); - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "SMBus Timeout!\n"); if (smbus->can_abort) nforce2_abort(adap); diff --git a/drivers/i2c/busses/i2c-sis5595.c b/drivers/i2c/busses/i2c-sis5595.c index f320ab27da4..139f0c7f12a 100644 --- a/drivers/i2c/busses/i2c-sis5595.c +++ b/drivers/i2c/busses/i2c-sis5595.c @@ -256,7 +256,7 @@ static int sis5595_transaction(struct i2c_adapter *adap) } while (!(temp & 0x40) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "SMBus Timeout!\n"); result = -ETIMEDOUT; } diff --git a/drivers/i2c/busses/i2c-sis630.c b/drivers/i2c/busses/i2c-sis630.c index 50c3610e602..70ca41e90e5 100644 --- a/drivers/i2c/busses/i2c-sis630.c +++ b/drivers/i2c/busses/i2c-sis630.c @@ -173,7 +173,7 @@ static int sis630_transaction_wait(struct i2c_adapter *adap, int size) } while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&adap->dev, "SMBus Timeout!\n"); result = -ETIMEDOUT; } diff --git a/drivers/i2c/busses/i2c-sis96x.c b/drivers/i2c/busses/i2c-sis96x.c index 7e1594b4057..8295885b2fd 100644 --- a/drivers/i2c/busses/i2c-sis96x.c +++ b/drivers/i2c/busses/i2c-sis96x.c @@ -132,7 +132,7 @@ static int sis96x_transaction(int size) } while (!(temp & 0x0e) && (timeout++ < MAX_TIMEOUT)); /* If the SMBus is still busy, we give up */ - if (timeout >= MAX_TIMEOUT) { + if (timeout > MAX_TIMEOUT) { dev_dbg(&sis96x_adapter.dev, "SMBus Timeout! (0x%02x)\n", temp); result = -ETIMEDOUT; } diff --git a/drivers/misc/isl29003.c b/drivers/misc/isl29003.c index 2e2a5923d4c..a71e245801e 100644 --- a/drivers/misc/isl29003.c +++ b/drivers/misc/isl29003.c @@ -64,6 +64,7 @@ struct isl29003_data { struct i2c_client *client; struct mutex lock; u8 reg_cache[ISL29003_NUM_CACHABLE_REGS]; + u8 power_state_before_suspend; }; static int gain_range[] = { @@ -411,6 +412,9 @@ static int __devexit isl29003_remove(struct i2c_client *client) #ifdef CONFIG_PM static int isl29003_suspend(struct i2c_client *client, pm_message_t mesg) { + struct isl29003_data *data = i2c_get_clientdata(client); + + data->power_state_before_suspend = isl29003_get_power_state(client); return isl29003_set_power_state(client, 0); } @@ -421,10 +425,11 @@ static int isl29003_resume(struct i2c_client *client) /* restore registers from cache */ for (i = 0; i < ARRAY_SIZE(data->reg_cache); i++) - if (!i2c_smbus_write_byte_data(client, i, data->reg_cache[i])) + if (i2c_smbus_write_byte_data(client, i, data->reg_cache[i])) return -EIO; - return 0; + return isl29003_set_power_state(client, + data->power_state_before_suspend); } #else diff --git a/drivers/mmc/card/block.c b/drivers/mmc/card/block.c index fe8041e619e..b25e9b6516a 100644 --- a/drivers/mmc/card/block.c +++ b/drivers/mmc/card/block.c @@ -254,6 +254,14 @@ static int mmc_blk_issue_rq(struct mmc_queue *mq, struct request *req) brq.data.blocks = req->nr_sectors; /* + * The block layer doesn't support all sector count + * restrictions, so we need to be prepared for too big + * requests. + */ + if (brq.data.blocks > card->host->max_blk_count) + brq.data.blocks = card->host->max_blk_count; + + /* * After a read error, we redo the request one sector at a time * in order to accurately determine which sectors can be read * successfully. diff --git a/drivers/mmc/core/core.c b/drivers/mmc/core/core.c index fa073ab3fa3..26491173275 100644 --- a/drivers/mmc/core/core.c +++ b/drivers/mmc/core/core.c @@ -706,7 +706,7 @@ static void mmc_power_up(struct mmc_host *host) * This delay should be sufficient to allow the power supply * to reach the minimum voltage. */ - mmc_delay(2); + mmc_delay(10); host->ios.clock = host->f_min; host->ios.power_mode = MMC_POWER_ON; @@ -716,7 +716,7 @@ static void mmc_power_up(struct mmc_host *host) * This delay must be at least 74 clock sizes, or 1 ms, or the * time required to reach a stable voltage. */ - mmc_delay(2); + mmc_delay(10); } static void mmc_power_off(struct mmc_host *host) diff --git a/drivers/mmc/host/mmci.c b/drivers/mmc/host/mmci.c index a663429b3d5..36875dcfa49 100644 --- a/drivers/mmc/host/mmci.c +++ b/drivers/mmc/host/mmci.c @@ -514,6 +514,7 @@ static int __devinit mmci_probe(struct amba_device *dev, void *id) } host = mmc_priv(mmc); + host->mmc = mmc; /* Bits 12 thru 19 is the designer */ host->hw_designer = (dev->periphid >> 12) & 0xff; /* Bits 20 thru 23 is the revison */ @@ -545,7 +546,6 @@ static int __devinit mmci_probe(struct amba_device *dev, void *id) host->mclk = clk_get_rate(host->clk); DBG(host, "eventual mclk rate: %u Hz\n", host->mclk); } - host->mmc = mmc; host->base = ioremap(dev->res.start, SZ_4K); if (!host->base) { ret = -ENOMEM; diff --git a/drivers/mmc/host/mvsdio.c b/drivers/mmc/host/mvsdio.c index b5c375d94ab..c643d0fe118 100644 --- a/drivers/mmc/host/mvsdio.c +++ b/drivers/mmc/host/mvsdio.c @@ -825,24 +825,23 @@ static int __exit mvsd_remove(struct platform_device *pdev) } #ifdef CONFIG_PM -static int mvsd_suspend(struct platform_device *dev, pm_message_t state, - u32 level) +static int mvsd_suspend(struct platform_device *dev, pm_message_t state) { struct mmc_host *mmc = platform_get_drvdata(dev); int ret = 0; - if (mmc && level == SUSPEND_DISABLE) + if (mmc) ret = mmc_suspend_host(mmc, state); return ret; } -static int mvsd_resume(struct platform_device *dev, u32 level) +static int mvsd_resume(struct platform_device *dev) { - struct mmc_host *mmc = platform_dev_get_drvdata(dev); + struct mmc_host *mmc = platform_get_drvdata(dev); int ret = 0; - if (mmc && level == RESUME_ENABLE) + if (mmc) ret = mmc_resume_host(mmc); return ret; diff --git a/drivers/mmc/host/sdhci-pci.c b/drivers/mmc/host/sdhci-pci.c index cd37962ec44..65be27995d5 100644 --- a/drivers/mmc/host/sdhci-pci.c +++ b/drivers/mmc/host/sdhci-pci.c @@ -522,8 +522,8 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot( host = sdhci_alloc_host(&pdev->dev, sizeof(struct sdhci_pci_slot)); if (IS_ERR(host)) { - ret = PTR_ERR(host); - goto unmap; + dev_err(&pdev->dev, "cannot allocate host\n"); + return ERR_PTR(PTR_ERR(host)); } slot = sdhci_priv(host); @@ -541,7 +541,7 @@ static struct sdhci_pci_slot * __devinit sdhci_pci_probe_slot( ret = pci_request_region(pdev, bar, mmc_hostname(host->mmc)); if (ret) { dev_err(&pdev->dev, "cannot request region\n"); - return ERR_PTR(ret); + goto free; } addr = pci_resource_start(pdev, bar); @@ -572,6 +572,8 @@ unmap: release: pci_release_region(pdev, bar); + +free: sdhci_free_host(host); return ERR_PTR(ret); diff --git a/drivers/mmc/host/sdhci.h b/drivers/mmc/host/sdhci.h index f20a834f430..65c6f996bbd 100644 --- a/drivers/mmc/host/sdhci.h +++ b/drivers/mmc/host/sdhci.h @@ -125,7 +125,7 @@ #define SDHCI_INT_DATA_MASK (SDHCI_INT_DATA_END | SDHCI_INT_DMA_END | \ SDHCI_INT_DATA_AVAIL | SDHCI_INT_SPACE_AVAIL | \ SDHCI_INT_DATA_TIMEOUT | SDHCI_INT_DATA_CRC | \ - SDHCI_INT_DATA_END_BIT) + SDHCI_INT_DATA_END_BIT | SDHCI_ADMA_ERROR) #define SDHCI_INT_ALL_MASK ((unsigned int)-1) #define SDHCI_ACMD12_ERR 0x3C diff --git a/drivers/net/bonding/bond_alb.c b/drivers/net/bonding/bond_alb.c index 553a8991977..46d312bedfb 100644 --- a/drivers/net/bonding/bond_alb.c +++ b/drivers/net/bonding/bond_alb.c @@ -1706,10 +1706,8 @@ void bond_alb_handle_active_change(struct bonding *bond, struct slave *new_slave * Called with RTNL */ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr) - __releases(&bond->curr_slave_lock) - __releases(&bond->lock) __acquires(&bond->lock) - __acquires(&bond->curr_slave_lock) + __releases(&bond->lock) { struct bonding *bond = netdev_priv(bond_dev); struct sockaddr *sa = addr; @@ -1745,9 +1743,6 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr) } } - write_unlock_bh(&bond->curr_slave_lock); - read_unlock(&bond->lock); - if (swap_slave) { alb_swap_mac_addr(bond, swap_slave, bond->curr_active_slave); alb_fasten_mac_swap(bond, swap_slave, bond->curr_active_slave); @@ -1755,16 +1750,15 @@ int bond_alb_set_mac_address(struct net_device *bond_dev, void *addr) alb_set_slave_mac_addr(bond->curr_active_slave, bond_dev->dev_addr, bond->alb_info.rlb_enabled); + read_lock(&bond->lock); alb_send_learning_packets(bond->curr_active_slave, bond_dev->dev_addr); if (bond->alb_info.rlb_enabled) { /* inform clients mac address has changed */ rlb_req_update_slave_clients(bond, bond->curr_active_slave); } + read_unlock(&bond->lock); } - read_lock(&bond->lock); - write_lock_bh(&bond->curr_slave_lock); - return 0; } diff --git a/drivers/net/bonding/bond_main.c b/drivers/net/bonding/bond_main.c index 63369b6b14d..2188a96fc09 100644 --- a/drivers/net/bonding/bond_main.c +++ b/drivers/net/bonding/bond_main.c @@ -2213,33 +2213,24 @@ static int bond_slave_info_query(struct net_device *bond_dev, struct ifslave *in { struct bonding *bond = netdev_priv(bond_dev); struct slave *slave; - int i, found = 0; - - if (info->slave_id < 0) { - return -ENODEV; - } + int i, res = -ENODEV; read_lock(&bond->lock); bond_for_each_slave(bond, slave, i) { if (i == (int)info->slave_id) { - found = 1; + res = 0; + strcpy(info->slave_name, slave->dev->name); + info->link = slave->link; + info->state = slave->state; + info->link_failure_count = slave->link_failure_count; break; } } read_unlock(&bond->lock); - if (found) { - strcpy(info->slave_name, slave->dev->name); - info->link = slave->link; - info->state = slave->state; - info->link_failure_count = slave->link_failure_count; - } else { - return -ENODEV; - } - - return 0; + return res; } /*-------------------------------- Monitoring -------------------------------*/ @@ -5167,16 +5158,15 @@ int bond_create(char *name, struct bond_params *params) up_write(&bonding_rwsem); rtnl_unlock(); /* allows sysfs registration of net device */ res = bond_create_sysfs_entry(netdev_priv(bond_dev)); - if (res < 0) { - rtnl_lock(); - down_write(&bonding_rwsem); - bond_deinit(bond_dev); - unregister_netdevice(bond_dev); - goto out_rtnl; - } + if (res < 0) + goto out_unreg; return 0; +out_unreg: + rtnl_lock(); + down_write(&bonding_rwsem); + unregister_netdevice(bond_dev); out_bond: bond_deinit(bond_dev); out_netdev: diff --git a/drivers/net/cxgb3/t3_hw.c b/drivers/net/cxgb3/t3_hw.c index e1bd690ff83..4f68aeb2679 100644 --- a/drivers/net/cxgb3/t3_hw.c +++ b/drivers/net/cxgb3/t3_hw.c @@ -3779,7 +3779,7 @@ int t3_prep_adapter(struct adapter *adapter, const struct adapter_info *ai, adapter->params.info = ai; adapter->params.nports = ai->nports0 + ai->nports1; - adapter->params.chan_map = !!ai->nports0 | (!!ai->nports1 << 1); + adapter->params.chan_map = (!!ai->nports0) | (!!ai->nports1 << 1); adapter->params.rev = t3_read_reg(adapter, A_PL_REV); /* * We used to only run the "adapter check task" once a second if diff --git a/drivers/net/e1000/e1000_main.c b/drivers/net/e1000/e1000_main.c index 6a46ceed943..b1419e21b46 100644 --- a/drivers/net/e1000/e1000_main.c +++ b/drivers/net/e1000/e1000_main.c @@ -3738,7 +3738,7 @@ static irqreturn_t e1000_intr(int irq, void *data) struct e1000_hw *hw = &adapter->hw; u32 rctl, icr = er32(ICR); - if (unlikely((!icr) || test_bit(__E1000_RESETTING, &adapter->flags))) + if (unlikely((!icr) || test_bit(__E1000_DOWN, &adapter->flags))) return IRQ_NONE; /* Not our interrupt */ /* IMS will not auto-mask if INT_ASSERTED is not set, and if it is diff --git a/drivers/net/ehea/ehea.h b/drivers/net/ehea/ehea.h index 6e317caf429..16a41389575 100644 --- a/drivers/net/ehea/ehea.h +++ b/drivers/net/ehea/ehea.h @@ -40,7 +40,7 @@ #include <asm/io.h> #define DRV_NAME "ehea" -#define DRV_VERSION "EHEA_0100" +#define DRV_VERSION "EHEA_0101" /* eHEA capability flags */ #define DLPAR_PORT_ADD_REM 1 diff --git a/drivers/net/ehea/ehea_main.c b/drivers/net/ehea/ehea_main.c index 604c844d076..b22dab9153f 100644 --- a/drivers/net/ehea/ehea_main.c +++ b/drivers/net/ehea/ehea_main.c @@ -545,14 +545,17 @@ static inline struct sk_buff *get_skb_by_index(struct sk_buff **skb_array, x &= (arr_len - 1); pref = skb_array[x]; - prefetchw(pref); - prefetchw(pref + EHEA_CACHE_LINE); - - pref = (skb_array[x]->data); - prefetch(pref); - prefetch(pref + EHEA_CACHE_LINE); - prefetch(pref + EHEA_CACHE_LINE * 2); - prefetch(pref + EHEA_CACHE_LINE * 3); + if (pref) { + prefetchw(pref); + prefetchw(pref + EHEA_CACHE_LINE); + + pref = (skb_array[x]->data); + prefetch(pref); + prefetch(pref + EHEA_CACHE_LINE); + prefetch(pref + EHEA_CACHE_LINE * 2); + prefetch(pref + EHEA_CACHE_LINE * 3); + } + skb = skb_array[skb_index]; skb_array[skb_index] = NULL; return skb; @@ -569,12 +572,14 @@ static inline struct sk_buff *get_skb_by_index_ll(struct sk_buff **skb_array, x &= (arr_len - 1); pref = skb_array[x]; - prefetchw(pref); - prefetchw(pref + EHEA_CACHE_LINE); + if (pref) { + prefetchw(pref); + prefetchw(pref + EHEA_CACHE_LINE); - pref = (skb_array[x]->data); - prefetchw(pref); - prefetchw(pref + EHEA_CACHE_LINE); + pref = (skb_array[x]->data); + prefetchw(pref); + prefetchw(pref + EHEA_CACHE_LINE); + } skb = skb_array[wqe_index]; skb_array[wqe_index] = NULL; diff --git a/drivers/net/mv643xx_eth.c b/drivers/net/mv643xx_eth.c index b3185bf2c15..a400d7115f7 100644 --- a/drivers/net/mv643xx_eth.c +++ b/drivers/net/mv643xx_eth.c @@ -393,12 +393,12 @@ struct mv643xx_eth_private { struct work_struct tx_timeout_task; struct napi_struct napi; + u8 oom; u8 work_link; u8 work_tx; u8 work_tx_end; u8 work_rx; u8 work_rx_refill; - u8 work_rx_oom; int skb_size; struct sk_buff_head rx_recycle; @@ -661,7 +661,7 @@ static int rxq_refill(struct rx_queue *rxq, int budget) dma_get_cache_alignment() - 1); if (skb == NULL) { - mp->work_rx_oom |= 1 << rxq->index; + mp->oom = 1; goto oom; } @@ -1255,7 +1255,6 @@ static void mib_counters_update(struct mv643xx_eth_private *mp) spin_lock_bh(&mp->mib_counters_lock); p->good_octets_received += mib_read(mp, 0x00); - p->good_octets_received += (u64)mib_read(mp, 0x04) << 32; p->bad_octets_received += mib_read(mp, 0x08); p->internal_mac_transmit_err += mib_read(mp, 0x0c); p->good_frames_received += mib_read(mp, 0x10); @@ -1269,7 +1268,6 @@ static void mib_counters_update(struct mv643xx_eth_private *mp) p->frames_512_to_1023_octets += mib_read(mp, 0x30); p->frames_1024_to_max_octets += mib_read(mp, 0x34); p->good_octets_sent += mib_read(mp, 0x38); - p->good_octets_sent += (u64)mib_read(mp, 0x3c) << 32; p->good_frames_sent += mib_read(mp, 0x40); p->excessive_collision += mib_read(mp, 0x44); p->multicast_frames_sent += mib_read(mp, 0x48); @@ -2167,8 +2165,10 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) mp = container_of(napi, struct mv643xx_eth_private, napi); - mp->work_rx_refill |= mp->work_rx_oom; - mp->work_rx_oom = 0; + if (unlikely(mp->oom)) { + mp->oom = 0; + del_timer(&mp->rx_oom); + } work_done = 0; while (work_done < budget) { @@ -2182,8 +2182,10 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) continue; } - queue_mask = mp->work_tx | mp->work_tx_end | - mp->work_rx | mp->work_rx_refill; + queue_mask = mp->work_tx | mp->work_tx_end | mp->work_rx; + if (likely(!mp->oom)) + queue_mask |= mp->work_rx_refill; + if (!queue_mask) { if (mv643xx_eth_collect_events(mp)) continue; @@ -2204,7 +2206,7 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) txq_maybe_wake(mp->txq + queue); } else if (mp->work_rx & queue_mask) { work_done += rxq_process(mp->rxq + queue, work_tbd); - } else if (mp->work_rx_refill & queue_mask) { + } else if (!mp->oom && (mp->work_rx_refill & queue_mask)) { work_done += rxq_refill(mp->rxq + queue, work_tbd); } else { BUG(); @@ -2212,7 +2214,7 @@ static int mv643xx_eth_poll(struct napi_struct *napi, int budget) } if (work_done < budget) { - if (mp->work_rx_oom) + if (mp->oom) mod_timer(&mp->rx_oom, jiffies + (HZ / 10)); napi_complete(napi); wrlp(mp, INT_MASK, INT_TX_END | INT_RX | INT_EXT); @@ -2372,7 +2374,7 @@ static int mv643xx_eth_open(struct net_device *dev) rxq_refill(mp->rxq + i, INT_MAX); } - if (mp->work_rx_oom) { + if (mp->oom) { mp->rx_oom.expires = jiffies + (HZ / 10); add_timer(&mp->rx_oom); } diff --git a/drivers/net/ne2k-pci.c b/drivers/net/ne2k-pci.c index eb66f658f9d..7d83896b8c2 100644 --- a/drivers/net/ne2k-pci.c +++ b/drivers/net/ne2k-pci.c @@ -374,18 +374,17 @@ static int __devinit ne2k_pci_init_one (struct pci_dev *pdev, dev->ethtool_ops = &ne2k_pci_ethtool_ops; NS8390_init(dev, 0); + memcpy(dev->dev_addr, SA_prom, 6); + memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); + i = register_netdev(dev); if (i) goto err_out_free_netdev; - for(i = 0; i < 6; i++) - dev->dev_addr[i] = SA_prom[i]; printk("%s: %s found at %#lx, IRQ %d, %pM.\n", dev->name, pci_clone_list[chip_idx].name, ioaddr, dev->irq, dev->dev_addr); - memcpy(dev->perm_addr, dev->dev_addr, dev->addr_len); - return 0; err_out_free_netdev: diff --git a/drivers/net/netconsole.c b/drivers/net/netconsole.c index eceadf787a6..bf4af5248cb 100644 --- a/drivers/net/netconsole.c +++ b/drivers/net/netconsole.c @@ -664,7 +664,7 @@ static int netconsole_netdev_event(struct notifier_block *this, struct netconsole_target *nt; struct net_device *dev = ptr; - if (!(event == NETDEV_CHANGENAME)) + if (!(event == NETDEV_CHANGENAME || event == NETDEV_UNREGISTER)) goto done; spin_lock_irqsave(&target_list_lock, flags); @@ -675,6 +675,15 @@ static int netconsole_netdev_event(struct notifier_block *this, case NETDEV_CHANGENAME: strlcpy(nt->np.dev_name, dev->name, IFNAMSIZ); break; + case NETDEV_UNREGISTER: + if (!nt->enabled) + break; + netpoll_cleanup(&nt->np); + nt->enabled = 0; + printk(KERN_INFO "netconsole: network logging stopped" + ", interface %s unregistered\n", + dev->name); + break; } } netconsole_target_put(nt); diff --git a/drivers/net/usb/Kconfig b/drivers/net/usb/Kconfig index 8ee21030e9a..dfc6cf765fb 100644 --- a/drivers/net/usb/Kconfig +++ b/drivers/net/usb/Kconfig @@ -180,6 +180,20 @@ config USB_NET_CDCETHER IEEE 802 "local assignment" bit is set in the address, a "usbX" name is used instead. +config USB_NET_CDC_EEM + tristate "CDC EEM support" + depends on USB_USBNET && EXPERIMENTAL + help + This option supports devices conforming to the Communication Device + Class (CDC) Ethernet Emulation Model, a specification that's easy to + implement in device firmware. The CDC EEM specifications are available + from <http://www.usb.org/>. + + This driver creates an interface named "ethX", where X depends on + what other networking devices you have in use. However, if the + IEEE 802 "local assignment" bit is set in the address, a "usbX" + name is used instead. + config USB_NET_DM9601 tristate "Davicom DM9601 based USB 1.1 10/100 ethernet devices" depends on USB_USBNET diff --git a/drivers/net/usb/Makefile b/drivers/net/usb/Makefile index 88a87eeb376..c8aef62cf2b 100644 --- a/drivers/net/usb/Makefile +++ b/drivers/net/usb/Makefile @@ -9,6 +9,7 @@ obj-$(CONFIG_USB_RTL8150) += rtl8150.o obj-$(CONFIG_USB_HSO) += hso.o obj-$(CONFIG_USB_NET_AX8817X) += asix.o obj-$(CONFIG_USB_NET_CDCETHER) += cdc_ether.o +obj-$(CONFIG_USB_NET_CDC_EEM) += cdc_eem.o obj-$(CONFIG_USB_NET_DM9601) += dm9601.o obj-$(CONFIG_USB_NET_SMSC95XX) += smsc95xx.o obj-$(CONFIG_USB_NET_GL620A) += gl620a.o diff --git a/drivers/net/usb/cdc_eem.c b/drivers/net/usb/cdc_eem.c new file mode 100644 index 00000000000..80e01778dd3 --- /dev/null +++ b/drivers/net/usb/cdc_eem.c @@ -0,0 +1,381 @@ +/* + * USB CDC EEM network interface driver + * Copyright (C) 2009 Oberthur Technologies + * by Omar Laazimani, Olivier Condemine + * + * This program is free software; you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation; either version 2 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 USA + */ + +#include <linux/module.h> +#include <linux/init.h> +#include <linux/netdevice.h> +#include <linux/etherdevice.h> +#include <linux/ctype.h> +#include <linux/ethtool.h> +#include <linux/workqueue.h> +#include <linux/mii.h> +#include <linux/usb.h> +#include <linux/crc32.h> +#include <linux/usb/cdc.h> +#include <linux/usb/usbnet.h> + + +/* + * This driver is an implementation of the CDC "Ethernet Emulation + * Model" (EEM) specification, which encapsulates Ethernet frames + * for transport over USB using a simpler USB device model than the + * previous CDC "Ethernet Control Model" (ECM, or "CDC Ethernet"). + * + * For details, see www.usb.org/developers/devclass_docs/CDC_EEM10.pdf + * + * This version has been tested with GIGAntIC WuaoW SIM Smart Card on 2.6.24, + * 2.6.27 and 2.6.30rc2 kernel. + * It has also been validated on Openmoko Om 2008.12 (based on 2.6.24 kernel). + * build on 23-April-2009 + */ + +#define EEM_HEAD 2 /* 2 byte header */ + +/*-------------------------------------------------------------------------*/ + +static void eem_linkcmd_complete(struct urb *urb) +{ + dev_kfree_skb(urb->context); + usb_free_urb(urb); +} + +static void eem_linkcmd(struct usbnet *dev, struct sk_buff *skb) +{ + struct urb *urb; + int status; + + urb = usb_alloc_urb(0, GFP_ATOMIC); + if (!urb) + goto fail; + + usb_fill_bulk_urb(urb, dev->udev, dev->out, + skb->data, skb->len, eem_linkcmd_complete, skb); + + status = usb_submit_urb(urb, GFP_ATOMIC); + if (status) { + usb_free_urb(urb); +fail: + dev_kfree_skb(skb); + devwarn(dev, "link cmd failure\n"); + return; + } +} + +static int eem_bind(struct usbnet *dev, struct usb_interface *intf) +{ + int status = 0; + + status = usbnet_get_endpoints(dev, intf); + if (status < 0) { + usb_set_intfdata(intf, NULL); + usb_driver_release_interface(driver_of(intf), intf); + return status; + } + + /* no jumbogram (16K) support for now */ + + dev->net->hard_header_len += EEM_HEAD + ETH_FCS_LEN; + + return 0; +} + +/* + * EEM permits packing multiple Ethernet frames into USB transfers + * (a "bundle"), but for TX we don't try to do that. + */ +static struct sk_buff *eem_tx_fixup(struct usbnet *dev, struct sk_buff *skb, + gfp_t flags) +{ + struct sk_buff *skb2 = NULL; + u16 len = skb->len; + u32 crc = 0; + int padlen = 0; + + /* When ((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket) is + * zero, stick two bytes of zero length EEM packet on the end. + * Else the framework would add invalid single byte padding, + * since it can't know whether ZLPs will be handled right by + * all the relevant hardware and software. + */ + if (!((len + EEM_HEAD + ETH_FCS_LEN) % dev->maxpacket)) + padlen += 2; + + if (!skb_cloned(skb)) { + int headroom = skb_headroom(skb); + int tailroom = skb_tailroom(skb); + + if ((tailroom >= ETH_FCS_LEN + padlen) + && (headroom >= EEM_HEAD)) + goto done; + + if ((headroom + tailroom) + > (EEM_HEAD + ETH_FCS_LEN + padlen)) { + skb->data = memmove(skb->head + + EEM_HEAD, + skb->data, + skb->len); + skb_set_tail_pointer(skb, len); + goto done; + } + } + + skb2 = skb_copy_expand(skb, EEM_HEAD, ETH_FCS_LEN + padlen, flags); + if (!skb2) + return NULL; + + dev_kfree_skb_any(skb); + skb = skb2; + +done: + /* we don't use the "no Ethernet CRC" option */ + crc = crc32_le(~0, skb->data, skb->len); + crc = ~crc; + + put_unaligned_le32(crc, skb_put(skb, 4)); + + /* EEM packet header format: + * b0..13: length of ethernet frame + * b14: bmCRC (1 == valid Ethernet CRC) + * b15: bmType (0 == data) + */ + len = skb->len; + put_unaligned_le16(BIT(14) | len, skb_push(skb, 2)); + + /* Bundle a zero length EEM packet if needed */ + if (padlen) + put_unaligned_le16(0, skb_put(skb, 2)); + + return skb; +} + +static int eem_rx_fixup(struct usbnet *dev, struct sk_buff *skb) +{ + /* + * Our task here is to strip off framing, leaving skb with one + * data frame for the usbnet framework code to process. But we + * may have received multiple EEM payloads, or command payloads. + * So we must process _everything_ as if it's a header, except + * maybe the last data payload + * + * REVISIT the framework needs updating so that when we consume + * all payloads (the last or only message was a command, or a + * zero length EEM packet) that is not accounted as an rx_error. + */ + do { + struct sk_buff *skb2 = NULL; + u16 header; + u16 len = 0; + + /* incomplete EEM header? */ + if (skb->len < EEM_HEAD) + return 0; + + /* + * EEM packet header format: + * b0..14: EEM type dependant (Data or Command) + * b15: bmType + */ + header = get_unaligned_le16(skb->data); + skb_pull(skb, EEM_HEAD); + + /* + * The bmType bit helps to denote when EEM + * packet is data or command : + * bmType = 0 : EEM data payload + * bmType = 1 : EEM (link) command + */ + if (header & BIT(15)) { + u16 bmEEMCmd; + + /* + * EEM (link) command packet: + * b0..10: bmEEMCmdParam + * b11..13: bmEEMCmd + * b14: bmReserved (must be 0) + * b15: 1 (EEM command) + */ + if (header & BIT(14)) { + devdbg(dev, "reserved command %04x\n", header); + continue; + } + + bmEEMCmd = (header >> 11) & 0x7; + switch (bmEEMCmd) { + + /* Responding to echo requests is mandatory. */ + case 0: /* Echo command */ + len = header & 0x7FF; + + /* bogus command? */ + if (skb->len < len) + return 0; + + skb2 = skb_clone(skb, GFP_ATOMIC); + if (unlikely(!skb2)) + goto next; + skb_trim(skb2, len); + put_unaligned_le16(BIT(15) | (1 << 11) | len, + skb_push(skb2, 2)); + eem_linkcmd(dev, skb2); + break; + + /* + * Host may choose to ignore hints. + * - suspend: peripheral ready to suspend + * - response: suggest N millisec polling + * - response complete: suggest N sec polling + */ + case 2: /* Suspend hint */ + case 3: /* Response hint */ + case 4: /* Response complete hint */ + continue; + + /* + * Hosts should never receive host-to-peripheral + * or reserved command codes; or responses to an + * echo command we didn't send. + */ + case 1: /* Echo response */ + case 5: /* Tickle */ + default: /* reserved */ + devwarn(dev, "unexpected link command %d\n", + bmEEMCmd); + continue; + } + + } else { + u32 crc, crc2; + int is_last; + + /* zero length EEM packet? */ + if (header == 0) + continue; + + /* + * EEM data packet header : + * b0..13: length of ethernet frame + * b14: bmCRC + * b15: 0 (EEM data) + */ + len = header & 0x3FFF; + + /* bogus EEM payload? */ + if (skb->len < len) + return 0; + + /* bogus ethernet frame? */ + if (len < (ETH_HLEN + ETH_FCS_LEN)) + goto next; + + /* + * Treat the last payload differently: framework + * code expects our "fixup" to have stripped off + * headers, so "skb" is a data packet (or error). + * Else if it's not the last payload, keep "skb" + * for further processing. + */ + is_last = (len == skb->len); + if (is_last) + skb2 = skb; + else { + skb2 = skb_clone(skb, GFP_ATOMIC); + if (unlikely(!skb2)) + return 0; + } + + crc = get_unaligned_le32(skb2->data + + len - ETH_FCS_LEN); + skb_trim(skb2, len - ETH_FCS_LEN); + + /* + * The bmCRC helps to denote when the CRC field in + * the Ethernet frame contains a calculated CRC: + * bmCRC = 1 : CRC is calculated + * bmCRC = 0 : CRC = 0xDEADBEEF + */ + if (header & BIT(14)) + crc2 = ~crc32_le(~0, skb2->data, len); + else + crc2 = 0xdeadbeef; + + if (is_last) + return crc == crc2; + + if (unlikely(crc != crc2)) { + dev->stats.rx_errors++; + dev_kfree_skb_any(skb2); + } else + usbnet_skb_return(dev, skb2); + } + +next: + skb_pull(skb, len); + } while (skb->len); + + return 1; +} + +static const struct driver_info eem_info = { + .description = "CDC EEM Device", + .flags = FLAG_ETHER, + .bind = eem_bind, + .rx_fixup = eem_rx_fixup, + .tx_fixup = eem_tx_fixup, +}; + +/*-------------------------------------------------------------------------*/ + +static const struct usb_device_id products[] = { +{ + USB_INTERFACE_INFO(USB_CLASS_COMM, USB_CDC_SUBCLASS_EEM, + USB_CDC_PROTO_EEM), + .driver_info = (unsigned long) &eem_info, +}, +{ + /* EMPTY == end of list */ +}, +}; +MODULE_DEVICE_TABLE(usb, products); + +static struct usb_driver eem_driver = { + .name = "cdc_eem", + .id_table = products, + .probe = usbnet_probe, + .disconnect = usbnet_disconnect, + .suspend = usbnet_suspend, + .resume = usbnet_resume, +}; + + +static int __init eem_init(void) +{ + return usb_register(&eem_driver); +} +module_init(eem_init); + +static void __exit eem_exit(void) +{ + usb_deregister(&eem_driver); +} +module_exit(eem_exit); + +MODULE_AUTHOR("Omar Laazimani <omar.oberthur@gmail.com>"); +MODULE_DESCRIPTION("USB CDC EEM"); +MODULE_LICENSE("GPL"); diff --git a/drivers/net/usb/smsc95xx.c b/drivers/net/usb/smsc95xx.c index dc166532659..5a7283372b5 100644 --- a/drivers/net/usb/smsc95xx.c +++ b/drivers/net/usb/smsc95xx.c @@ -941,6 +941,16 @@ static int smsc95xx_reset(struct usbnet *dev) if (netif_msg_ifup(dev)) devdbg(dev, "ID_REV = 0x%08x", read_buf); + /* Configure GPIO pins as LED outputs */ + write_buf = LED_GPIO_CFG_SPD_LED | LED_GPIO_CFG_LNK_LED | + LED_GPIO_CFG_FDX_LED; + ret = smsc95xx_write_reg(dev, LED_GPIO_CFG, write_buf); + if (ret < 0) { + devwarn(dev, "Failed to write LED_GPIO_CFG register, ret=%d", + ret); + return ret; + } + /* Init Tx */ write_buf = 0; ret = smsc95xx_write_reg(dev, FLOW, write_buf); @@ -1231,6 +1241,11 @@ static const struct usb_device_id products[] = { USB_DEVICE(0x0424, 0x9500), .driver_info = (unsigned long) &smsc95xx_info, }, + { + /* SMSC9512/9514 USB Hub & Ethernet Device */ + USB_DEVICE(0x0424, 0xec00), + .driver_info = (unsigned long) &smsc95xx_info, + }, { }, /* END */ }; MODULE_DEVICE_TABLE(usb, products); diff --git a/drivers/net/usb/smsc95xx.h b/drivers/net/usb/smsc95xx.h index 66b5c84f302..86bc44977fb 100644 --- a/drivers/net/usb/smsc95xx.h +++ b/drivers/net/usb/smsc95xx.h @@ -99,6 +99,9 @@ #define PM_CTL_WUPS_MULTI_ (0x00000003) #define LED_GPIO_CFG (0x24) +#define LED_GPIO_CFG_SPD_LED (0x01000000) +#define LED_GPIO_CFG_LNK_LED (0x00100000) +#define LED_GPIO_CFG_FDX_LED (0x00010000) #define GPIO_CFG (0x28) diff --git a/drivers/net/virtio_net.c b/drivers/net/virtio_net.c index 9c82a39497e..4d1d47953fc 100644 --- a/drivers/net/virtio_net.c +++ b/drivers/net/virtio_net.c @@ -616,10 +616,11 @@ static int virtnet_open(struct net_device *dev) static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd, struct scatterlist *data, int out, int in) { - struct scatterlist sg[VIRTNET_SEND_COMMAND_SG_MAX + 2]; + struct scatterlist *s, sg[VIRTNET_SEND_COMMAND_SG_MAX + 2]; struct virtio_net_ctrl_hdr ctrl; virtio_net_ctrl_ack status = ~0; unsigned int tmp; + int i; if (!virtio_has_feature(vi->vdev, VIRTIO_NET_F_CTRL_VQ)) { BUG(); /* Caller should know better */ @@ -637,7 +638,8 @@ static bool virtnet_send_command(struct virtnet_info *vi, u8 class, u8 cmd, sg_init_table(sg, out + in); sg_set_buf(&sg[0], &ctrl, sizeof(ctrl)); - memcpy(&sg[1], data, sizeof(struct scatterlist) * (out + in - 2)); + for_each_sg(data, s, out + in - 2, i) + sg_set_buf(&sg[i + 1], sg_virt(s), s->length); sg_set_buf(&sg[out + in - 1], &status, sizeof(status)); if (vi->cvq->vq_ops->add_buf(vi->cvq, sg, out, in, vi) != 0) @@ -692,7 +694,7 @@ static void virtnet_set_rx_mode(struct net_device *dev) promisc = ((dev->flags & IFF_PROMISC) != 0); allmulti = ((dev->flags & IFF_ALLMULTI) != 0); - sg_set_buf(sg, &promisc, sizeof(promisc)); + sg_init_one(sg, &promisc, sizeof(promisc)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX, VIRTIO_NET_CTRL_RX_PROMISC, @@ -700,7 +702,7 @@ static void virtnet_set_rx_mode(struct net_device *dev) dev_warn(&dev->dev, "Failed to %sable promisc mode.\n", promisc ? "en" : "dis"); - sg_set_buf(sg, &allmulti, sizeof(allmulti)); + sg_init_one(sg, &allmulti, sizeof(allmulti)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_RX, VIRTIO_NET_CTRL_RX_ALLMULTI, @@ -716,6 +718,8 @@ static void virtnet_set_rx_mode(struct net_device *dev) return; } + sg_init_table(sg, 2); + /* Store the unicast list and count in the front of the buffer */ mac_data->entries = dev->uc_count; addr = dev->uc_list; @@ -744,24 +748,24 @@ static void virtnet_set_rx_mode(struct net_device *dev) kfree(buf); } -static void virnet_vlan_rx_add_vid(struct net_device *dev, u16 vid) +static void virtnet_vlan_rx_add_vid(struct net_device *dev, u16 vid) { struct virtnet_info *vi = netdev_priv(dev); struct scatterlist sg; - sg_set_buf(&sg, &vid, sizeof(vid)); + sg_init_one(&sg, &vid, sizeof(vid)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN, VIRTIO_NET_CTRL_VLAN_ADD, &sg, 1, 0)) dev_warn(&dev->dev, "Failed to add VLAN ID %d.\n", vid); } -static void virnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid) +static void virtnet_vlan_rx_kill_vid(struct net_device *dev, u16 vid) { struct virtnet_info *vi = netdev_priv(dev); struct scatterlist sg; - sg_set_buf(&sg, &vid, sizeof(vid)); + sg_init_one(&sg, &vid, sizeof(vid)); if (!virtnet_send_command(vi, VIRTIO_NET_CTRL_VLAN, VIRTIO_NET_CTRL_VLAN_DEL, &sg, 1, 0)) @@ -794,8 +798,8 @@ static const struct net_device_ops virtnet_netdev = { .ndo_set_mac_address = virtnet_set_mac_address, .ndo_set_rx_mode = virtnet_set_rx_mode, .ndo_change_mtu = virtnet_change_mtu, - .ndo_vlan_rx_add_vid = virnet_vlan_rx_add_vid, - .ndo_vlan_rx_kill_vid = virnet_vlan_rx_kill_vid, + .ndo_vlan_rx_add_vid = virtnet_vlan_rx_add_vid, + .ndo_vlan_rx_kill_vid = virtnet_vlan_rx_kill_vid, #ifdef CONFIG_NET_POLL_CONTROLLER .ndo_poll_controller = virtnet_netpoll, #endif diff --git a/drivers/net/wireless/ath5k/debug.c b/drivers/net/wireless/ath5k/debug.c index 9770bb3d40f..4904a07e4b5 100644 --- a/drivers/net/wireless/ath5k/debug.c +++ b/drivers/net/wireless/ath5k/debug.c @@ -424,7 +424,7 @@ ath5k_debug_dump_bands(struct ath5k_softc *sc) for (b = 0; b < IEEE80211_NUM_BANDS; b++) { struct ieee80211_supported_band *band = &sc->sbands[b]; - char bname[5]; + char bname[6]; switch (band->band) { case IEEE80211_BAND_2GHZ: strcpy(bname, "2 GHz"); diff --git a/drivers/net/wireless/iwlwifi/iwl-scan.c b/drivers/net/wireless/iwlwifi/iwl-scan.c index 23644cf884f..e7c65c4f741 100644 --- a/drivers/net/wireless/iwlwifi/iwl-scan.c +++ b/drivers/net/wireless/iwlwifi/iwl-scan.c @@ -925,11 +925,11 @@ void iwl_bg_scan_completed(struct work_struct *work) IWL_DEBUG_SCAN(priv, "SCAN complete scan\n"); + ieee80211_scan_completed(priv->hw, false); + if (test_bit(STATUS_EXIT_PENDING, &priv->status)) return; - ieee80211_scan_completed(priv->hw, false); - /* Since setting the TXPOWER may have been deferred while * performing the scan, fire one off */ mutex_lock(&priv->mutex); diff --git a/drivers/net/wireless/iwlwifi/iwl3945-base.c b/drivers/net/wireless/iwlwifi/iwl3945-base.c index 617c4235d97..70a00c8ee42 100644 --- a/drivers/net/wireless/iwlwifi/iwl3945-base.c +++ b/drivers/net/wireless/iwlwifi/iwl3945-base.c @@ -1694,7 +1694,6 @@ void iwl3945_rx_queue_reset(struct iwl_priv *priv, struct iwl_rx_queue *rxq) rxq->free_count = 0; spin_unlock_irqrestore(&rxq->lock, flags); } -EXPORT_SYMBOL(iwl3945_rx_queue_reset); /* * this should be called while priv->lock is locked diff --git a/drivers/net/wireless/rndis_wlan.c b/drivers/net/wireless/rndis_wlan.c index db91db77650..bebf735cd4b 100644 --- a/drivers/net/wireless/rndis_wlan.c +++ b/drivers/net/wireless/rndis_wlan.c @@ -2558,6 +2558,11 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf) mutex_init(&priv->command_lock); spin_lock_init(&priv->stats_lock); + /* because rndis_command() sleeps we need to use workqueue */ + priv->workqueue = create_singlethread_workqueue("rndis_wlan"); + INIT_WORK(&priv->work, rndis_wext_worker); + INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats); + /* try bind rndis_host */ retval = generic_rndis_bind(usbdev, intf, FLAG_RNDIS_PHYM_WIRELESS); if (retval < 0) @@ -2603,16 +2608,17 @@ static int rndis_wext_bind(struct usbnet *usbdev, struct usb_interface *intf) disassociate(usbdev, 1); netif_carrier_off(usbdev->net); - /* because rndis_command() sleeps we need to use workqueue */ - priv->workqueue = create_singlethread_workqueue("rndis_wlan"); - INIT_DELAYED_WORK(&priv->stats_work, rndis_update_wireless_stats); queue_delayed_work(priv->workqueue, &priv->stats_work, round_jiffies_relative(STATS_UPDATE_JIFFIES)); - INIT_WORK(&priv->work, rndis_wext_worker); return 0; fail: + cancel_delayed_work_sync(&priv->stats_work); + cancel_work_sync(&priv->work); + flush_workqueue(priv->workqueue); + destroy_workqueue(priv->workqueue); + kfree(priv); return retval; } diff --git a/drivers/serial/jsm/jsm.h b/drivers/serial/jsm/jsm.h index 8871aaa3dba..c0a3e2734e2 100644 --- a/drivers/serial/jsm/jsm.h +++ b/drivers/serial/jsm/jsm.h @@ -130,8 +130,6 @@ struct jsm_board struct pci_dev *pci_dev; u32 maxports; /* MAX ports this board can handle */ - spinlock_t bd_lock; /* Used to protect board */ - spinlock_t bd_intr_lock; /* Used to protect the poller tasklet and * the interrupt routine from each other. */ diff --git a/drivers/serial/jsm/jsm_driver.c b/drivers/serial/jsm/jsm_driver.c index d2d32a19862..b3604aa322a 100644 --- a/drivers/serial/jsm/jsm_driver.c +++ b/drivers/serial/jsm/jsm_driver.c @@ -88,7 +88,6 @@ static int __devinit jsm_probe_one(struct pci_dev *pdev, const struct pci_device else brd->maxports = 2; - spin_lock_init(&brd->bd_lock); spin_lock_init(&brd->bd_intr_lock); /* store which revision we have */ diff --git a/drivers/serial/s3c6400.c b/drivers/serial/s3c6400.c index 06936d13393..3e378523368 100644 --- a/drivers/serial/s3c6400.c +++ b/drivers/serial/s3c6400.c @@ -102,6 +102,7 @@ static struct s3c24xx_uart_info s3c6400_uart_inf = { .name = "Samsung S3C6400 UART", .type = PORT_S3C6400, .fifosize = 64, + .has_divslot = 1, .rx_fifomask = S3C2440_UFSTAT_RXMASK, .rx_fifoshift = S3C2440_UFSTAT_RXSHIFT, .rx_fifofull = S3C2440_UFSTAT_RXFULL, diff --git a/drivers/serial/samsung.c b/drivers/serial/samsung.c index e06686ae858..93b5d75db12 100644 --- a/drivers/serial/samsung.c +++ b/drivers/serial/samsung.c @@ -508,6 +508,7 @@ s3c24xx_serial_setsource(struct uart_port *port, struct s3c24xx_uart_clksrc *c) struct baud_calc { struct s3c24xx_uart_clksrc *clksrc; unsigned int calc; + unsigned int divslot; unsigned int quot; struct clk *src; }; @@ -517,6 +518,7 @@ static int s3c24xx_serial_calcbaud(struct baud_calc *calc, struct s3c24xx_uart_clksrc *clksrc, unsigned int baud) { + struct s3c24xx_uart_port *ourport = to_ourport(port); unsigned long rate; calc->src = clk_get(port->dev, clksrc->name); @@ -527,8 +529,24 @@ static int s3c24xx_serial_calcbaud(struct baud_calc *calc, rate /= clksrc->divisor; calc->clksrc = clksrc; - calc->quot = (rate + (8 * baud)) / (16 * baud); - calc->calc = (rate / (calc->quot * 16)); + + if (ourport->info->has_divslot) { + unsigned long div = rate / baud; + + /* The UDIVSLOT register on the newer UARTs allows us to + * get a divisor adjustment of 1/16th on the baud clock. + * + * We don't keep the UDIVSLOT value (the 16ths we calculated + * by not multiplying the baud by 16) as it is easy enough + * to recalculate. + */ + + calc->quot = div / 16; + calc->calc = rate / div; + } else { + calc->quot = (rate + (8 * baud)) / (16 * baud); + calc->calc = (rate / (calc->quot * 16)); + } calc->quot--; return 1; @@ -611,6 +629,30 @@ static unsigned int s3c24xx_serial_getclk(struct uart_port *port, return best->quot; } +/* udivslot_table[] + * + * This table takes the fractional value of the baud divisor and gives + * the recommended setting for the UDIVSLOT register. + */ +static u16 udivslot_table[16] = { + [0] = 0x0000, + [1] = 0x0080, + [2] = 0x0808, + [3] = 0x0888, + [4] = 0x2222, + [5] = 0x4924, + [6] = 0x4A52, + [7] = 0x54AA, + [8] = 0x5555, + [9] = 0xD555, + [10] = 0xD5D5, + [11] = 0xDDD5, + [12] = 0xDDDD, + [13] = 0xDFDD, + [14] = 0xDFDF, + [15] = 0xFFDF, +}; + static void s3c24xx_serial_set_termios(struct uart_port *port, struct ktermios *termios, struct ktermios *old) @@ -623,6 +665,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, unsigned int baud, quot; unsigned int ulcon; unsigned int umcon; + unsigned int udivslot = 0; /* * We don't support modem control lines. @@ -644,6 +687,7 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, /* check to see if we need to change clock source */ if (ourport->clksrc != clksrc || ourport->baudclk != clk) { + dbg("selecting clock %p\n", clk); s3c24xx_serial_setsource(port, clksrc); if (ourport->baudclk != NULL && !IS_ERR(ourport->baudclk)) { @@ -658,6 +702,13 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, ourport->baudclk_rate = clk ? clk_get_rate(clk) : 0; } + if (ourport->info->has_divslot) { + unsigned int div = ourport->baudclk_rate / baud; + + udivslot = udivslot_table[div & 15]; + dbg("udivslot = %04x (div %d)\n", udivslot, div & 15); + } + switch (termios->c_cflag & CSIZE) { case CS5: dbg("config: 5bits/char\n"); @@ -697,12 +748,16 @@ static void s3c24xx_serial_set_termios(struct uart_port *port, spin_lock_irqsave(&port->lock, flags); - dbg("setting ulcon to %08x, brddiv to %d\n", ulcon, quot); + dbg("setting ulcon to %08x, brddiv to %d, udivslot %08x\n", + ulcon, quot, udivslot); wr_regl(port, S3C2410_ULCON, ulcon); wr_regl(port, S3C2410_UBRDIV, quot); wr_regl(port, S3C2410_UMCON, umcon); + if (ourport->info->has_divslot) + wr_regl(port, S3C2443_DIVSLOT, udivslot); + dbg("uart: ulcon = 0x%08x, ucon = 0x%08x, ufcon = 0x%08x\n", rd_regl(port, S3C2410_ULCON), rd_regl(port, S3C2410_UCON), diff --git a/drivers/serial/samsung.h b/drivers/serial/samsung.h index 571d6b90d20..7afb94843a0 100644 --- a/drivers/serial/samsung.h +++ b/drivers/serial/samsung.h @@ -21,6 +21,10 @@ struct s3c24xx_uart_info { unsigned long tx_fifoshift; unsigned long tx_fifofull; + /* uart port features */ + + unsigned int has_divslot:1; + /* clock source control */ int (*get_clksrc)(struct uart_port *, struct s3c24xx_uart_clksrc *clk); diff --git a/drivers/video/Makefile b/drivers/video/Makefile index 0dbd6c68d76..d8d0be5151e 100644 --- a/drivers/video/Makefile +++ b/drivers/video/Makefile @@ -56,7 +56,6 @@ obj-$(CONFIG_FB_CT65550) += chipsfb.o obj-$(CONFIG_FB_IMSTT) += imsttfb.o obj-$(CONFIG_FB_FM2) += fm2fb.o obj-$(CONFIG_FB_VT8623) += vt8623fb.o -obj-$(CONFIG_FB_CYBLA) += cyblafb.o obj-$(CONFIG_FB_TRIDENT) += tridentfb.o obj-$(CONFIG_FB_LE80578) += vermilion/ obj-$(CONFIG_FB_S3) += s3fb.o diff --git a/drivers/video/cfbfillrect.c b/drivers/video/cfbfillrect.c index 64b35766b2a..ba9f58b2a5e 100644 --- a/drivers/video/cfbfillrect.c +++ b/drivers/video/cfbfillrect.c @@ -9,10 +9,6 @@ * * NOTES: * - * The code for depths like 24 that don't have integer number of pixels per - * long is broken and needs to be fixed. For now I turned these types of - * mode off. - * * Also need to add code to deal with cards endians that are different than * the native cpu endians. I also need to deal with MSB position in the word. * @@ -139,7 +135,7 @@ bitfill_unaligned(struct fb_info *p, unsigned long __iomem *dst, int dst_idx, // Trailing bits if (last) - FB_WRITEL(comp(pat, FB_READL(dst), first), dst); + FB_WRITEL(comp(pat, FB_READL(dst), last), dst); } } @@ -281,7 +277,7 @@ bitfill_unaligned_rev(struct fb_info *p, unsigned long __iomem *dst, void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect) { - unsigned long pat, fg; + unsigned long pat, pat2, fg; unsigned long width = rect->width, height = rect->height; int bits = BITS_PER_LONG, bytes = bits >> 3; u32 bpp = p->var.bits_per_pixel; @@ -297,7 +293,7 @@ void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect) else fg = rect->color; - pat = pixel_to_pat( bpp, fg); + pat = pixel_to_pat(bpp, fg); dst = (unsigned long __iomem *)((unsigned long)p->screen_base & ~(bytes-1)); dst_idx = ((unsigned long)p->screen_base & (bytes - 1))*8; @@ -333,17 +329,16 @@ void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect) dst_idx += p->fix.line_length*8; } } else { - int right; - int r; - int rot = (left-dst_idx) % bpp; + int right, r; void (*fill_op)(struct fb_info *p, unsigned long __iomem *dst, int dst_idx, unsigned long pat, int left, int right, unsigned n, int bits) = NULL; - - /* rotate pattern to correct start position */ - pat = pat << rot | pat >> (bpp-rot); - - right = bpp-left; +#ifdef __LITTLE_ENDIAN + right = left; + left = bpp - right; +#else + right = bpp - left; +#endif switch (rect->rop) { case ROP_XOR: fill_op = bitfill_unaligned_rev; @@ -352,17 +347,18 @@ void cfb_fillrect(struct fb_info *p, const struct fb_fillrect *rect) fill_op = bitfill_unaligned; break; default: - printk( KERN_ERR "cfb_fillrect(): unknown rop, defaulting to ROP_COPY\n"); + printk(KERN_ERR "cfb_fillrect(): unknown rop, defaulting to ROP_COPY\n"); fill_op = bitfill_unaligned; break; } while (height--) { - dst += dst_idx >> (ffs(bits) - 1); + dst += dst_idx / bits; dst_idx &= (bits - 1); - fill_op(p, dst, dst_idx, pat, left, right, + r = dst_idx % bpp; + /* rotate pattern to the correct start position */ + pat2 = le_long_to_cpu(rolx(cpu_to_le_long(pat), r, bpp)); + fill_op(p, dst, dst_idx, pat2, left, right, width*bpp, bits); - r = (p->fix.line_length*8) % bpp; - pat = pat << (bpp-r) | pat >> r; dst_idx += p->fix.line_length*8; } } diff --git a/drivers/video/fb_draw.h b/drivers/video/fb_draw.h index 1db622192bd..04c01faaf77 100644 --- a/drivers/video/fb_draw.h +++ b/drivers/video/fb_draw.h @@ -33,11 +33,11 @@ pixel_to_pat( u32 bpp, u32 pixel) case 8: return 0x0101010101010101ul*pixel; case 12: - return 0x0001001001001001ul*pixel; + return 0x1001001001001001ul*pixel; case 16: return 0x0001000100010001ul*pixel; case 24: - return 0x0000000001000001ul*pixel; + return 0x0001000001000001ul*pixel; case 32: return 0x0000000100000001ul*pixel; default: @@ -58,11 +58,11 @@ pixel_to_pat( u32 bpp, u32 pixel) case 8: return 0x01010101ul*pixel; case 12: - return 0x00001001ul*pixel; + return 0x01001001ul*pixel; case 16: return 0x00010001ul*pixel; case 24: - return 0x00000001ul*pixel; + return 0x01000001ul*pixel; case 32: return 0x00000001ul*pixel; default: @@ -167,4 +167,17 @@ static inline unsigned long fb_rev_pixels_in_long(unsigned long val, #endif /* CONFIG_FB_CFB_REV_PIXELS_IN_BYTE */ +#define cpu_to_le_long _cpu_to_le_long(BITS_PER_LONG) +#define _cpu_to_le_long(x) __cpu_to_le_long(x) +#define __cpu_to_le_long(x) cpu_to_le##x + +#define le_long_to_cpu _le_long_to_cpu(BITS_PER_LONG) +#define _le_long_to_cpu(x) __le_long_to_cpu(x) +#define __le_long_to_cpu(x) le##x##_to_cpu + +static inline unsigned long rolx(unsigned long word, unsigned int shift, unsigned int x) +{ + return (word << shift) | (word >> (x - shift)); +} + #endif /* FB_DRAW_H */ diff --git a/drivers/video/mx3fb.c b/drivers/video/mx3fb.c index 21b3692092f..9894de1c9b9 100644 --- a/drivers/video/mx3fb.c +++ b/drivers/video/mx3fb.c @@ -1152,11 +1152,11 @@ static struct fb_ops mx3fb_ops = { */ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state) { - struct mx3fb_data *drv_data = platform_get_drvdata(pdev); - struct mx3fb_info *mx3_fbi = drv_data->fbi->par; + struct mx3fb_data *mx3fb = platform_get_drvdata(pdev); + struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; acquire_console_sem(); - fb_set_suspend(drv_data->fbi, 1); + fb_set_suspend(mx3fb->fbi, 1); release_console_sem(); if (mx3_fbi->blank == FB_BLANK_UNBLANK) { @@ -1172,16 +1172,16 @@ static int mx3fb_suspend(struct platform_device *pdev, pm_message_t state) */ static int mx3fb_resume(struct platform_device *pdev) { - struct mx3fb_data *drv_data = platform_get_drvdata(pdev); - struct mx3fb_info *mx3_fbi = drv_data->fbi->par; + struct mx3fb_data *mx3fb = platform_get_drvdata(pdev); + struct mx3fb_info *mx3_fbi = mx3fb->fbi->par; if (mx3_fbi->blank == FB_BLANK_UNBLANK) { sdc_enable_channel(mx3_fbi); - sdc_set_brightness(mx3fb, drv_data->backlight_level); + sdc_set_brightness(mx3fb, mx3fb->backlight_level); } acquire_console_sem(); - fb_set_suspend(drv_data->fbi, 0); + fb_set_suspend(mx3fb->fbi, 0); release_console_sem(); return 0; diff --git a/drivers/video/sysfillrect.c b/drivers/video/sysfillrect.c index f94d6b6e29e..33ee3d34f9d 100644 --- a/drivers/video/sysfillrect.c +++ b/drivers/video/sysfillrect.c @@ -124,7 +124,7 @@ bitfill_unaligned(struct fb_info *p, unsigned long *dst, int dst_idx, /* Trailing bits */ if (last) - *dst = comp(pat, *dst, first); + *dst = comp(pat, *dst, last); } } @@ -242,7 +242,7 @@ bitfill_unaligned_rev(struct fb_info *p, unsigned long *dst, int dst_idx, void sys_fillrect(struct fb_info *p, const struct fb_fillrect *rect) { - unsigned long pat, fg; + unsigned long pat, pat2, fg; unsigned long width = rect->width, height = rect->height; int bits = BITS_PER_LONG, bytes = bits >> 3; u32 bpp = p->var.bits_per_pixel; @@ -292,17 +292,16 @@ void sys_fillrect(struct fb_info *p, const struct fb_fillrect *rect) dst_idx += p->fix.line_length*8; } } else { - int right; - int r; - int rot = (left-dst_idx) % bpp; + int right, r; void (*fill_op)(struct fb_info *p, unsigned long *dst, int dst_idx, unsigned long pat, int left, int right, unsigned n, int bits) = NULL; - - /* rotate pattern to correct start position */ - pat = pat << rot | pat >> (bpp-rot); - - right = bpp-left; +#ifdef __LITTLE_ENDIAN + right = left; + left = bpp - right; +#else + right = bpp - left; +#endif switch (rect->rop) { case ROP_XOR: fill_op = bitfill_unaligned_rev; @@ -311,18 +310,19 @@ void sys_fillrect(struct fb_info *p, const struct fb_fillrect *rect) fill_op = bitfill_unaligned; break; default: - printk(KERN_ERR "cfb_fillrect(): unknown rop, " + printk(KERN_ERR "sys_fillrect(): unknown rop, " "defaulting to ROP_COPY\n"); fill_op = bitfill_unaligned; break; } while (height--) { - dst += dst_idx >> (ffs(bits) - 1); + dst += dst_idx / bits; dst_idx &= (bits - 1); - fill_op(p, dst, dst_idx, pat, left, right, + r = dst_idx % bpp; + /* rotate pattern to the correct start position */ + pat2 = le_long_to_cpu(rolx(cpu_to_le_long(pat), r, bpp)); + fill_op(p, dst, dst_idx, pat2, left, right, width*bpp, bits); - r = (p->fix.line_length*8) % bpp; - pat = pat << (bpp-r) | pat >> r; dst_idx += p->fix.line_length*8; } } diff --git a/drivers/xen/balloon.c b/drivers/xen/balloon.c index efa4b363ce7..f5bbd9e8341 100644 --- a/drivers/xen/balloon.c +++ b/drivers/xen/balloon.c @@ -513,7 +513,8 @@ static ssize_t show_target(struct sys_device *dev, struct sysdev_attribute *attr char *buf) { return sprintf(buf, "%llu\n", - (u64)balloon_stats.target_pages << PAGE_SHIFT); + (unsigned long long)balloon_stats.target_pages + << PAGE_SHIFT); } static ssize_t store_target(struct sys_device *dev, diff --git a/fs/ioctl.c b/fs/ioctl.c index ac2d47e4392..82d9c42b8ba 100644 --- a/fs/ioctl.c +++ b/fs/ioctl.c @@ -258,7 +258,7 @@ int __generic_block_fiemap(struct inode *inode, long long length = 0, map_len = 0; u64 logical = 0, phys = 0, size = 0; u32 flags = FIEMAP_EXTENT_MERGED; - int ret = 0; + int ret = 0, past_eof = 0, whole_file = 0; if ((ret = fiemap_check_flags(fieinfo, FIEMAP_FLAG_SYNC))) return ret; @@ -266,6 +266,9 @@ int __generic_block_fiemap(struct inode *inode, start_blk = logical_to_blk(inode, start); length = (long long)min_t(u64, len, i_size_read(inode)); + if (length < len) + whole_file = 1; + map_len = length; do { @@ -282,11 +285,26 @@ int __generic_block_fiemap(struct inode *inode, /* HOLE */ if (!buffer_mapped(&tmp)) { + length -= blk_to_logical(inode, 1); + start_blk++; + + /* + * we want to handle the case where there is an + * allocated block at the front of the file, and then + * nothing but holes up to the end of the file properly, + * to make sure that extent at the front gets properly + * marked with FIEMAP_EXTENT_LAST + */ + if (!past_eof && + blk_to_logical(inode, start_blk) >= + blk_to_logical(inode, 0)+i_size_read(inode)) + past_eof = 1; + /* * first hole after going past the EOF, this is our * last extent */ - if (length <= 0) { + if (past_eof && size) { flags = FIEMAP_EXTENT_MERGED|FIEMAP_EXTENT_LAST; ret = fiemap_fill_next_extent(fieinfo, logical, phys, size, @@ -294,15 +312,37 @@ int __generic_block_fiemap(struct inode *inode, break; } - length -= blk_to_logical(inode, 1); - /* if we have holes up to/past EOF then we're done */ - if (length <= 0) + if (length <= 0 || past_eof) break; - - start_blk++; } else { - if (length <= 0 && size) { + /* + * we have gone over the length of what we wanted to + * map, and it wasn't the entire file, so add the extent + * we got last time and exit. + * + * This is for the case where say we want to map all the + * way up to the second to the last block in a file, but + * the last block is a hole, making the second to last + * block FIEMAP_EXTENT_LAST. In this case we want to + * see if there is a hole after the second to last block + * so we can mark it properly. If we found data after + * we exceeded the length we were requesting, then we + * are good to go, just add the extent to the fieinfo + * and break + */ + if (length <= 0 && !whole_file) { + ret = fiemap_fill_next_extent(fieinfo, logical, + phys, size, + flags); + break; + } + + /* + * if size != 0 then we know we already have an extent + * to add, so add it. + */ + if (size) { ret = fiemap_fill_next_extent(fieinfo, logical, phys, size, flags); @@ -319,19 +359,14 @@ int __generic_block_fiemap(struct inode *inode, start_blk += logical_to_blk(inode, size); /* - * if we are past the EOF we need to loop again to see - * if there is a hole so we can mark this extent as the - * last one, and if not keep mapping things until we - * find a hole, or we run out of slots in the extent - * array + * If we are past the EOF, then we need to make sure as + * soon as we find a hole that the last extent we found + * is marked with FIEMAP_EXTENT_LAST */ - if (length <= 0) - continue; - - ret = fiemap_fill_next_extent(fieinfo, logical, phys, - size, flags); - if (ret) - break; + if (!past_eof && + logical+size >= + blk_to_logical(inode, 0)+i_size_read(inode)) + past_eof = 1; } cond_resched(); } while (1); diff --git a/fs/nfs/file.c b/fs/nfs/file.c index 5a97bcfe03e..ec7e27d00bc 100644 --- a/fs/nfs/file.c +++ b/fs/nfs/file.c @@ -517,10 +517,10 @@ static int nfs_vm_page_mkwrite(struct vm_area_struct *vma, struct vm_fault *vmf) ret = nfs_updatepage(filp, page, 0, pagelen); out_unlock: + if (!ret) + return VM_FAULT_LOCKED; unlock_page(page); - if (ret) - ret = VM_FAULT_SIGBUS; - return ret; + return VM_FAULT_SIGBUS; } static struct vm_operations_struct nfs_file_vm_ops = { diff --git a/fs/notify/inotify/inotify_user.c b/fs/notify/inotify/inotify_user.c index bed766e435b..1634319e240 100644 --- a/fs/notify/inotify/inotify_user.c +++ b/fs/notify/inotify/inotify_user.c @@ -220,7 +220,7 @@ static struct inotify_kernel_event * kernel_event(s32 wd, u32 mask, u32 cookie, rem = 0; } - kevent->name = kmalloc(len + rem, GFP_KERNEL); + kevent->name = kmalloc(len + rem, GFP_NOFS); if (unlikely(!kevent->name)) { kmem_cache_free(event_cachep, kevent); return NULL; diff --git a/fs/proc/array.c b/fs/proc/array.c index 7e4877d9dcb..725a650bbbb 100644 --- a/fs/proc/array.c +++ b/fs/proc/array.c @@ -80,6 +80,7 @@ #include <linux/delayacct.h> #include <linux/seq_file.h> #include <linux/pid_namespace.h> +#include <linux/ptrace.h> #include <linux/tracehook.h> #include <asm/pgtable.h> @@ -352,6 +353,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns, char state; pid_t ppid = 0, pgid = -1, sid = -1; int num_threads = 0; + int permitted; struct mm_struct *mm; unsigned long long start_time; unsigned long cmin_flt = 0, cmaj_flt = 0; @@ -364,11 +366,14 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns, state = *get_task_state(task); vsize = eip = esp = 0; + permitted = ptrace_may_access(task, PTRACE_MODE_READ); mm = get_task_mm(task); if (mm) { vsize = task_vsize(mm); - eip = KSTK_EIP(task); - esp = KSTK_ESP(task); + if (permitted) { + eip = KSTK_EIP(task); + esp = KSTK_ESP(task); + } } get_task_comm(tcomm, task); @@ -424,7 +429,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns, unlock_task_sighand(task, &flags); } - if (!whole || num_threads < 2) + if (permitted && (!whole || num_threads < 2)) wchan = get_wchan(task); if (!whole) { min_flt = task->min_flt; @@ -476,7 +481,7 @@ static int do_task_stat(struct seq_file *m, struct pid_namespace *ns, rsslim, mm ? mm->start_code : 0, mm ? mm->end_code : 0, - mm ? mm->start_stack : 0, + (permitted && mm) ? mm->start_stack : 0, esp, eip, /* The signal information here is obsolete. diff --git a/fs/proc/base.c b/fs/proc/base.c index aa763ab0077..fb45615943c 100644 --- a/fs/proc/base.c +++ b/fs/proc/base.c @@ -322,7 +322,10 @@ static int proc_pid_wchan(struct task_struct *task, char *buffer) wchan = get_wchan(task); if (lookup_symbol_name(wchan, symname) < 0) - return sprintf(buffer, "%lu", wchan); + if (!ptrace_may_access(task, PTRACE_MODE_READ)) + return 0; + else + return sprintf(buffer, "%lu", wchan); else return sprintf(buffer, "%s", symname); } diff --git a/include/asm-generic/bug.h b/include/asm-generic/bug.h index e727fe0d145..4b6755984d2 100644 --- a/include/asm-generic/bug.h +++ b/include/asm-generic/bug.h @@ -58,12 +58,13 @@ struct bug_entry { */ #ifndef __WARN #ifndef __ASSEMBLY__ -extern void warn_slowpath(const char *file, const int line, +extern void warn_slowpath_fmt(const char *file, const int line, const char *fmt, ...) __attribute__((format(printf, 3, 4))); +extern void warn_slowpath_null(const char *file, const int line); #define WANT_WARN_ON_SLOWPATH #endif -#define __WARN() warn_slowpath(__FILE__, __LINE__, NULL) -#define __WARN_printf(arg...) warn_slowpath(__FILE__, __LINE__, arg) +#define __WARN() warn_slowpath_null(__FILE__, __LINE__) +#define __WARN_printf(arg...) warn_slowpath_fmt(__FILE__, __LINE__, arg) #else #define __WARN_printf(arg...) do { printk(arg); __WARN(); } while (0) #endif diff --git a/include/linux/netfilter/x_tables.h b/include/linux/netfilter/x_tables.h index 1b2e43502ef..c9efe039dc5 100644 --- a/include/linux/netfilter/x_tables.h +++ b/include/linux/netfilter/x_tables.h @@ -472,7 +472,7 @@ static inline void xt_info_rdlock_bh(void) local_bh_disable(); lock = &__get_cpu_var(xt_info_locks); - if (!lock->readers++) + if (likely(!lock->readers++)) spin_lock(&lock->lock); } @@ -480,7 +480,7 @@ static inline void xt_info_rdunlock_bh(void) { struct xt_info_lock *lock = &__get_cpu_var(xt_info_locks); - if (!--lock->readers) + if (likely(!--lock->readers)) spin_unlock(&lock->lock); local_bh_enable(); } diff --git a/include/linux/usb/cdc.h b/include/linux/usb/cdc.h index 3c86ed25a04..c24124a42ce 100644 --- a/include/linux/usb/cdc.h +++ b/include/linux/usb/cdc.h @@ -17,6 +17,7 @@ #define USB_CDC_SUBCLASS_DMM 0x09 #define USB_CDC_SUBCLASS_MDLM 0x0a #define USB_CDC_SUBCLASS_OBEX 0x0b +#define USB_CDC_SUBCLASS_EEM 0x0c #define USB_CDC_PROTO_NONE 0 @@ -28,6 +29,8 @@ #define USB_CDC_ACM_PROTO_AT_CDMA 6 #define USB_CDC_ACM_PROTO_VENDOR 0xff +#define USB_CDC_PROTO_EEM 7 + /*-------------------------------------------------------------------------*/ /* diff --git a/include/linux/virtio_net.h b/include/linux/virtio_net.h index 242348bb376..cec79adbe3e 100644 --- a/include/linux/virtio_net.h +++ b/include/linux/virtio_net.h @@ -4,6 +4,7 @@ * compatible drivers/servers. */ #include <linux/types.h> #include <linux/virtio_config.h> +#include <linux/if_ether.h> /* The ID for virtio_net */ #define VIRTIO_ID_NET 1 diff --git a/include/net/9p/client.h b/include/net/9p/client.h index 4012e07162e..e26812274b7 100644 --- a/include/net/9p/client.h +++ b/include/net/9p/client.h @@ -98,7 +98,6 @@ enum p9_req_status_t { struct p9_req_t { int status; int t_err; - u16 flush_tag; wait_queue_head_t *wq; struct p9_fcall *tc; struct p9_fcall *rc; diff --git a/include/net/bluetooth/hci_core.h b/include/net/bluetooth/hci_core.h index be5bd713d2c..73aead222b3 100644 --- a/include/net/bluetooth/hci_core.h +++ b/include/net/bluetooth/hci_core.h @@ -457,6 +457,7 @@ int hci_recv_fragment(struct hci_dev *hdev, int type, void *data, int count); int hci_register_sysfs(struct hci_dev *hdev); void hci_unregister_sysfs(struct hci_dev *hdev); +void hci_conn_init_sysfs(struct hci_conn *conn); void hci_conn_add_sysfs(struct hci_conn *conn); void hci_conn_del_sysfs(struct hci_conn *conn); diff --git a/include/net/tcp.h b/include/net/tcp.h index 1b94b9bfe2d..646dbe3962e 100644 --- a/include/net/tcp.h +++ b/include/net/tcp.h @@ -41,6 +41,7 @@ #include <net/ip.h> #include <net/tcp_states.h> #include <net/inet_ecn.h> +#include <net/dst.h> #include <linux/seq_file.h> @@ -530,6 +531,17 @@ static inline void tcp_fast_path_check(struct sock *sk) tcp_fast_path_on(tp); } +/* Compute the actual rto_min value */ +static inline u32 tcp_rto_min(struct sock *sk) +{ + struct dst_entry *dst = __sk_dst_get(sk); + u32 rto_min = TCP_RTO_MIN; + + if (dst && dst_metric_locked(dst, RTAX_RTO_MIN)) + rto_min = dst_metric_rtt(dst, RTAX_RTO_MIN); + return rto_min; +} + /* Compute the actual receive window we are currently advertising. * Rcv_nxt can be after the window if our peer push more data * than the offered window. @@ -895,7 +907,7 @@ static inline int tcp_prequeue(struct sock *sk, struct sk_buff *skb) wake_up_interruptible(sk->sk_sleep); if (!inet_csk_ack_scheduled(sk)) inet_csk_reset_xmit_timer(sk, ICSK_TIME_DACK, - (3 * TCP_RTO_MIN) / 4, + (3 * tcp_rto_min(sk)) / 4, TCP_RTO_MAX); } return 1; diff --git a/init/initramfs.c b/init/initramfs.c index 9ee7b781041..4c00edc5968 100644 --- a/init/initramfs.c +++ b/init/initramfs.c @@ -574,11 +574,10 @@ static int __init populate_rootfs(void) if (initrd_start) { #ifdef CONFIG_BLK_DEV_RAM int fd; - printk(KERN_INFO "checking if image is initramfs...\n"); + printk(KERN_INFO "Trying to unpack rootfs image as initramfs...\n"); err = unpack_to_rootfs((char *)initrd_start, initrd_end - initrd_start); if (!err) { - printk(KERN_INFO "rootfs image is initramfs; unpacking...\n"); free_initrd(); return 0; } else { @@ -596,15 +595,11 @@ static int __init populate_rootfs(void) free_initrd(); } #else - printk(KERN_INFO "Unpacking initramfs..."); + printk(KERN_INFO "Unpacking initramfs...\n"); err = unpack_to_rootfs((char *)initrd_start, initrd_end - initrd_start); - if (err) { - printk(" failed!\n"); - printk(KERN_EMERG "%s\n", err); - } else { - printk(" done\n"); - } + if (err) + printk(KERN_EMERG "Initramfs unpacking failed: %s\n", err); free_initrd(); #endif } diff --git a/kernel/auditfilter.c b/kernel/auditfilter.c index a6fe71fd5d1..713098ee5a0 100644 --- a/kernel/auditfilter.c +++ b/kernel/auditfilter.c @@ -1028,7 +1028,7 @@ static void audit_update_watch(struct audit_parent *parent, if (audit_enabled) { struct audit_buffer *ab; - ab = audit_log_start(NULL, GFP_KERNEL, + ab = audit_log_start(NULL, GFP_NOFS, AUDIT_CONFIG_CHANGE); audit_log_format(ab, "auid=%u ses=%u", audit_get_loginuid(current), @@ -1067,7 +1067,7 @@ static void audit_remove_parent_watches(struct audit_parent *parent) e = container_of(r, struct audit_entry, rule); if (audit_enabled) { struct audit_buffer *ab; - ab = audit_log_start(NULL, GFP_KERNEL, + ab = audit_log_start(NULL, GFP_NOFS, AUDIT_CONFIG_CHANGE); audit_log_format(ab, "auid=%u ses=%u", audit_get_loginuid(current), diff --git a/kernel/irq/handle.c b/kernel/irq/handle.c index d82142be8dd..26e08754744 100644 --- a/kernel/irq/handle.c +++ b/kernel/irq/handle.c @@ -363,8 +363,6 @@ irqreturn_t handle_IRQ_event(unsigned int irq, struct irqaction *action) irqreturn_t ret, retval = IRQ_NONE; unsigned int status = 0; - WARN_ONCE(!in_irq(), "BUG: IRQ handler called from non-hardirq context!"); - if (!(action->flags & IRQF_DISABLED)) local_irq_enable_in_hardirq(); diff --git a/kernel/panic.c b/kernel/panic.c index 3dcaa166135..874ecf1307a 100644 --- a/kernel/panic.c +++ b/kernel/panic.c @@ -340,7 +340,7 @@ void oops_exit(void) } #ifdef WANT_WARN_ON_SLOWPATH -void warn_slowpath(const char *file, int line, const char *fmt, ...) +void warn_slowpath_fmt(const char *file, int line, const char *fmt, ...) { va_list args; char function[KSYM_SYMBOL_LEN]; @@ -356,7 +356,7 @@ void warn_slowpath(const char *file, int line, const char *fmt, ...) if (board) printk(KERN_WARNING "Hardware name: %s\n", board); - if (fmt) { + if (*fmt) { va_start(args, fmt); vprintk(fmt, args); va_end(args); @@ -367,7 +367,14 @@ void warn_slowpath(const char *file, int line, const char *fmt, ...) print_oops_end_marker(); add_taint(TAINT_WARN); } -EXPORT_SYMBOL(warn_slowpath); +EXPORT_SYMBOL(warn_slowpath_fmt); + +void warn_slowpath_null(const char *file, int line) +{ + static const char *empty = ""; + warn_slowpath_fmt(file, line, empty); +} +EXPORT_SYMBOL(warn_slowpath_null); #endif #ifdef CONFIG_CC_STACKPROTECTOR diff --git a/kernel/posix-cpu-timers.c b/kernel/posix-cpu-timers.c index c9dcf98b446..bece7c0b67b 100644 --- a/kernel/posix-cpu-timers.c +++ b/kernel/posix-cpu-timers.c @@ -1420,19 +1420,19 @@ void run_posix_cpu_timers(struct task_struct *tsk) * timer call will interfere. */ list_for_each_entry_safe(timer, next, &firing, it.cpu.entry) { - int firing; + int cpu_firing; + spin_lock(&timer->it_lock); list_del_init(&timer->it.cpu.entry); - firing = timer->it.cpu.firing; + cpu_firing = timer->it.cpu.firing; timer->it.cpu.firing = 0; /* * The firing flag is -1 if we collided with a reset * of the timer, which already reported this * almost-firing as an overrun. So don't generate an event. */ - if (likely(firing >= 0)) { + if (likely(cpu_firing >= 0)) cpu_timer_fire(timer); - } spin_unlock(&timer->it_lock); } } diff --git a/kernel/sched.c b/kernel/sched.c index b902e587a3a..26efa475bdc 100644 --- a/kernel/sched.c +++ b/kernel/sched.c @@ -4732,7 +4732,7 @@ void account_process_tick(struct task_struct *p, int user_tick) if (user_tick) account_user_time(p, one_jiffy, one_jiffy_scaled); - else if (p != rq->idle) + else if ((p != rq->idle) || (irq_count() != HARDIRQ_OFFSET)) account_system_time(p, HARDIRQ_OFFSET, one_jiffy, one_jiffy_scaled); else diff --git a/kernel/time/tick-common.c b/kernel/time/tick-common.c index 21a5ca84951..83c4417b6a3 100644 --- a/kernel/time/tick-common.c +++ b/kernel/time/tick-common.c @@ -93,7 +93,17 @@ void tick_handle_periodic(struct clock_event_device *dev) for (;;) { if (!clockevents_program_event(dev, next, ktime_get())) return; - tick_periodic(cpu); + /* + * Have to be careful here. If we're in oneshot mode, + * before we call tick_periodic() in a loop, we need + * to be sure we're using a real hardware clocksource. + * Otherwise we could get trapped in an infinite + * loop, as the tick_periodic() increments jiffies, + * when then will increment time, posibly causing + * the loop to trigger again and again. + */ + if (timekeeping_valid_for_hres()) + tick_periodic(cpu); next = ktime_add(next, tick_period); } } diff --git a/kernel/trace/trace.c b/kernel/trace/trace.c index 1ce5dc6372b..a884c09006c 100644 --- a/kernel/trace/trace.c +++ b/kernel/trace/trace.c @@ -3448,6 +3448,7 @@ tracing_buffers_splice_read(struct file *file, loff_t *ppos, if (!ref) break; + ref->ref = 1; ref->buffer = info->tr->buffer; ref->page = ring_buffer_alloc_read_page(ref->buffer); if (!ref->page) { diff --git a/lib/dma-debug.c b/lib/dma-debug.c index d3da7edc034..69da09a085a 100644 --- a/lib/dma-debug.c +++ b/lib/dma-debug.c @@ -400,60 +400,9 @@ out_err: return -ENOMEM; } -static int device_dma_allocations(struct device *dev) -{ - struct dma_debug_entry *entry; - unsigned long flags; - int count = 0, i; - - for (i = 0; i < HASH_SIZE; ++i) { - spin_lock_irqsave(&dma_entry_hash[i].lock, flags); - list_for_each_entry(entry, &dma_entry_hash[i].list, list) { - if (entry->dev == dev) - count += 1; - } - spin_unlock_irqrestore(&dma_entry_hash[i].lock, flags); - } - - return count; -} - -static int dma_debug_device_change(struct notifier_block *nb, - unsigned long action, void *data) -{ - struct device *dev = data; - int count; - - - switch (action) { - case BUS_NOTIFY_UNBIND_DRIVER: - count = device_dma_allocations(dev); - if (count == 0) - break; - err_printk(dev, NULL, "DMA-API: device driver has pending " - "DMA allocations while released from device " - "[count=%d]\n", count); - break; - default: - break; - } - - return 0; -} - void dma_debug_add_bus(struct bus_type *bus) { - struct notifier_block *nb; - - nb = kzalloc(sizeof(struct notifier_block), GFP_KERNEL); - if (nb == NULL) { - printk(KERN_ERR "dma_debug_add_bus: out of memory\n"); - return; - } - - nb->notifier_call = dma_debug_device_change; - - bus_register_notifier(bus, nb); + /* FIXME: register notifier */ } /* diff --git a/mm/Kconfig b/mm/Kconfig index 57971d2ab84..c2b57d81e15 100644 --- a/mm/Kconfig +++ b/mm/Kconfig @@ -225,3 +225,31 @@ config HAVE_MLOCKED_PAGE_BIT config MMU_NOTIFIER bool + +config NOMMU_INITIAL_TRIM_EXCESS + int "Turn on mmap() excess space trimming before booting" + depends on !MMU + default 1 + help + The NOMMU mmap() frequently needs to allocate large contiguous chunks + of memory on which to store mappings, but it can only ask the system + allocator for chunks in 2^N*PAGE_SIZE amounts - which is frequently + more than it requires. To deal with this, mmap() is able to trim off + the excess and return it to the allocator. + + If trimming is enabled, the excess is trimmed off and returned to the + system allocator, which can cause extra fragmentation, particularly + if there are a lot of transient processes. + + If trimming is disabled, the excess is kept, but not used, which for + long-term mappings means that the space is wasted. + + Trimming can be dynamically controlled through a sysctl option + (/proc/sys/vm/nr_trim_pages) which specifies the minimum number of + excess pages there must be before trimming should occur, or zero if + no trimming is to occur. + + This option specifies the initial value of this option. The default + of 1 says that all excess pages should be trimmed. + + See Documentation/nommu-mmap.txt for more information. diff --git a/mm/madvise.c b/mm/madvise.c index b9ce574827c..36d6ea2b634 100644 --- a/mm/madvise.c +++ b/mm/madvise.c @@ -112,6 +112,14 @@ static long madvise_willneed(struct vm_area_struct * vma, if (!file) return -EBADF; + /* + * Page cache readahead assumes page cache pages are order-0 which + * is not the case for hugetlbfs. Do not give a bad return value + * but ignore the advice. + */ + if (vma->vm_flags & VM_HUGETLB) + return 0; + if (file->f_mapping->a_ops->get_xip_mem) { /* no bad return value, but ignore advice */ return 0; diff --git a/mm/nommu.c b/mm/nommu.c index 809998aa7b5..67cd1a487ee 100644 --- a/mm/nommu.c +++ b/mm/nommu.c @@ -66,7 +66,7 @@ struct percpu_counter vm_committed_as; int sysctl_overcommit_memory = OVERCOMMIT_GUESS; /* heuristic overcommit */ int sysctl_overcommit_ratio = 50; /* default is 50% */ int sysctl_max_map_count = DEFAULT_MAX_MAP_COUNT; -int sysctl_nr_trim_pages = 1; /* page trimming behaviour */ +int sysctl_nr_trim_pages = CONFIG_NOMMU_INITIAL_TRIM_EXCESS; int heap_stack_gap = 0; atomic_long_t mmap_pages_allocated; diff --git a/mm/oom_kill.c b/mm/oom_kill.c index 2f3166e308d..92bcf1db16b 100644 --- a/mm/oom_kill.c +++ b/mm/oom_kill.c @@ -514,34 +514,32 @@ void clear_zonelist_oom(struct zonelist *zonelist, gfp_t gfp_mask) */ static void __out_of_memory(gfp_t gfp_mask, int order) { - if (sysctl_oom_kill_allocating_task) { - oom_kill_process(current, gfp_mask, order, 0, NULL, - "Out of memory (oom_kill_allocating_task)"); - - } else { - unsigned long points; - struct task_struct *p; - -retry: - /* - * Rambo mode: Shoot down a process and hope it solves whatever - * issues we may have. - */ - p = select_bad_process(&points, NULL); + struct task_struct *p; + unsigned long points; - if (PTR_ERR(p) == -1UL) + if (sysctl_oom_kill_allocating_task) + if (!oom_kill_process(current, gfp_mask, order, 0, NULL, + "Out of memory (oom_kill_allocating_task)")) return; +retry: + /* + * Rambo mode: Shoot down a process and hope it solves whatever + * issues we may have. + */ + p = select_bad_process(&points, NULL); - /* Found nothing?!?! Either we hang forever, or we panic. */ - if (!p) { - read_unlock(&tasklist_lock); - panic("Out of memory and no killable processes...\n"); - } + if (PTR_ERR(p) == -1UL) + return; - if (oom_kill_process(p, gfp_mask, order, points, NULL, - "Out of memory")) - goto retry; + /* Found nothing?!?! Either we hang forever, or we panic. */ + if (!p) { + read_unlock(&tasklist_lock); + panic("Out of memory and no killable processes...\n"); } + + if (oom_kill_process(p, gfp_mask, order, points, NULL, + "Out of memory")) + goto retry; } /* diff --git a/mm/page_alloc.c b/mm/page_alloc.c index e2f26991fff..fe753ecf2aa 100644 --- a/mm/page_alloc.c +++ b/mm/page_alloc.c @@ -2681,6 +2681,7 @@ static void __meminit zone_init_free_lists(struct zone *zone) static int zone_batchsize(struct zone *zone) { +#ifdef CONFIG_MMU int batch; /* @@ -2706,9 +2707,26 @@ static int zone_batchsize(struct zone *zone) * of pages of one half of the possible page colors * and the other with pages of the other colors. */ - batch = (1 << (fls(batch + batch/2)-1)) - 1; + batch = rounddown_pow_of_two(batch + batch/2) - 1; return batch; + +#else + /* The deferral and batching of frees should be suppressed under NOMMU + * conditions. + * + * The problem is that NOMMU needs to be able to allocate large chunks + * of contiguous memory as there's no hardware page translation to + * assemble apparent contiguous memory from discontiguous pages. + * + * Queueing large contiguous runs of pages for batching, however, + * causes the pages to actually be freed in smaller chunks. As there + * can be a significant delay between the individual batches being + * recycled, this leads to the once large chunks of space being + * fragmented and becoming unavailable for high-order allocations. + */ + return 0; +#endif } static void setup_pageset(struct per_cpu_pageset *p, unsigned long batch) diff --git a/mm/vmalloc.c b/mm/vmalloc.c index fab19876b4d..083716ea38c 100644 --- a/mm/vmalloc.c +++ b/mm/vmalloc.c @@ -402,6 +402,7 @@ overflow: printk(KERN_WARNING "vmap allocation for size %lu failed: " "use vmalloc=<size> to increase size.\n", size); + kfree(va); return ERR_PTR(-EBUSY); } diff --git a/net/9p/client.c b/net/9p/client.c index 1eb580c38fb..dd43a8289b0 100644 --- a/net/9p/client.c +++ b/net/9p/client.c @@ -203,7 +203,6 @@ static struct p9_req_t *p9_tag_alloc(struct p9_client *c, u16 tag) p9pdu_reset(req->tc); p9pdu_reset(req->rc); - req->flush_tag = 0; req->tc->tag = tag-1; req->status = REQ_STATUS_ALLOC; @@ -324,35 +323,9 @@ static void p9_free_req(struct p9_client *c, struct p9_req_t *r) */ void p9_client_cb(struct p9_client *c, struct p9_req_t *req) { - struct p9_req_t *other_req; - unsigned long flags; - P9_DPRINTK(P9_DEBUG_MUX, " tag %d\n", req->tc->tag); - - if (req->status == REQ_STATUS_ERROR) - wake_up(req->wq); - - if (req->flush_tag) { /* flush receive path */ - P9_DPRINTK(P9_DEBUG_9P, "<<< RFLUSH %d\n", req->tc->tag); - spin_lock_irqsave(&c->lock, flags); - other_req = p9_tag_lookup(c, req->flush_tag); - if (other_req->status != REQ_STATUS_FLSH) /* stale flush */ - spin_unlock_irqrestore(&c->lock, flags); - else { - other_req->status = REQ_STATUS_FLSHD; - spin_unlock_irqrestore(&c->lock, flags); - wake_up(other_req->wq); - } - p9_free_req(c, req); - } else { /* normal receive path */ - P9_DPRINTK(P9_DEBUG_MUX, "normal: tag %d\n", req->tc->tag); - spin_lock_irqsave(&c->lock, flags); - if (req->status != REQ_STATUS_FLSHD) - req->status = REQ_STATUS_RCVD; - spin_unlock_irqrestore(&c->lock, flags); - wake_up(req->wq); - P9_DPRINTK(P9_DEBUG_MUX, "wakeup: %d\n", req->tc->tag); - } + wake_up(req->wq); + P9_DPRINTK(P9_DEBUG_MUX, "wakeup: %d\n", req->tc->tag); } EXPORT_SYMBOL(p9_client_cb); @@ -486,9 +459,15 @@ static int p9_client_flush(struct p9_client *c, struct p9_req_t *oldreq) if (IS_ERR(req)) return PTR_ERR(req); - req->flush_tag = oldtag; - /* we don't free anything here because RPC isn't complete */ + /* if we haven't received a response for oldreq, + remove it from the list. */ + spin_lock(&c->lock); + if (oldreq->status == REQ_STATUS_FLSH) + list_del(&oldreq->req_list); + spin_unlock(&c->lock); + + p9_free_req(c, req); return 0; } @@ -509,7 +488,6 @@ p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...) struct p9_req_t *req; unsigned long flags; int sigpending; - int flushed = 0; P9_DPRINTK(P9_DEBUG_MUX, "client %p op %d\n", c, type); @@ -546,42 +524,28 @@ p9_client_rpc(struct p9_client *c, int8_t type, const char *fmt, ...) goto reterr; } - /* if it was a flush we just transmitted, return our tag */ - if (type == P9_TFLUSH) - return req; -again: P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d\n", req->wq, tag); err = wait_event_interruptible(*req->wq, req->status >= REQ_STATUS_RCVD); - P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d returned %d (flushed=%d)\n", - req->wq, tag, err, flushed); + P9_DPRINTK(P9_DEBUG_MUX, "wait %p tag: %d returned %d\n", + req->wq, tag, err); if (req->status == REQ_STATUS_ERROR) { P9_DPRINTK(P9_DEBUG_ERROR, "req_status error %d\n", req->t_err); err = req->t_err; - } else if (err == -ERESTARTSYS && flushed) { - P9_DPRINTK(P9_DEBUG_MUX, "flushed - going again\n"); - goto again; - } else if (req->status == REQ_STATUS_FLSHD) { - P9_DPRINTK(P9_DEBUG_MUX, "flushed - erestartsys\n"); - err = -ERESTARTSYS; } - if ((err == -ERESTARTSYS) && (c->status == Connected) && (!flushed)) { + if ((err == -ERESTARTSYS) && (c->status == Connected)) { P9_DPRINTK(P9_DEBUG_MUX, "flushing\n"); - spin_lock_irqsave(&c->lock, flags); - if (req->status == REQ_STATUS_SENT) - req->status = REQ_STATUS_FLSH; - spin_unlock_irqrestore(&c->lock, flags); sigpending = 1; - flushed = 1; clear_thread_flag(TIF_SIGPENDING); - if (c->trans_mod->cancel(c, req)) { - err = p9_client_flush(c, req); - if (err == 0) - goto again; - } + if (c->trans_mod->cancel(c, req)) + p9_client_flush(c, req); + + /* if we received the response anyway, don't signal error */ + if (req->status == REQ_STATUS_RCVD) + err = 0; } if (sigpending) { @@ -1244,19 +1208,53 @@ struct p9_wstat *p9_client_stat(struct p9_fid *fid) ret->name, ret->uid, ret->gid, ret->muid, ret->extension, ret->n_uid, ret->n_gid, ret->n_muid); + p9_free_req(clnt, req); + return ret; + free_and_error: p9_free_req(clnt, req); error: - return ret; + kfree(ret); + return ERR_PTR(err); } EXPORT_SYMBOL(p9_client_stat); +static int p9_client_statsize(struct p9_wstat *wst, int optional) +{ + int ret; + + /* size[2] type[2] dev[4] qid[13] */ + /* mode[4] atime[4] mtime[4] length[8]*/ + /* name[s] uid[s] gid[s] muid[s] */ + ret = 2+2+4+13+4+4+4+8+2+2+2+2; + + if (wst->name) + ret += strlen(wst->name); + if (wst->uid) + ret += strlen(wst->uid); + if (wst->gid) + ret += strlen(wst->gid); + if (wst->muid) + ret += strlen(wst->muid); + + if (optional) { + ret += 2+4+4+4; /* extension[s] n_uid[4] n_gid[4] n_muid[4] */ + if (wst->extension) + ret += strlen(wst->extension); + } + + return ret; +} + int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst) { int err; struct p9_req_t *req; struct p9_client *clnt; + err = 0; + clnt = fid->clnt; + wst->size = p9_client_statsize(wst, clnt->dotu); P9_DPRINTK(P9_DEBUG_9P, ">>> TWSTAT fid %d\n", fid->fid); P9_DPRINTK(P9_DEBUG_9P, " sz=%x type=%x dev=%x qid=%x.%llx.%x\n" @@ -1268,10 +1266,8 @@ int p9_client_wstat(struct p9_fid *fid, struct p9_wstat *wst) wst->atime, wst->mtime, (unsigned long long)wst->length, wst->name, wst->uid, wst->gid, wst->muid, wst->extension, wst->n_uid, wst->n_gid, wst->n_muid); - err = 0; - clnt = fid->clnt; - req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, 0, wst); + req = p9_client_rpc(clnt, P9_TWSTAT, "dwS", fid->fid, wst->size, wst); if (IS_ERR(req)) { err = PTR_ERR(req); goto error; diff --git a/net/9p/trans_fd.c b/net/9p/trans_fd.c index c613ed08a5e..a2a1814c7a8 100644 --- a/net/9p/trans_fd.c +++ b/net/9p/trans_fd.c @@ -213,8 +213,8 @@ static void p9_conn_cancel(struct p9_conn *m, int err) spin_unlock_irqrestore(&m->client->lock, flags); list_for_each_entry_safe(req, rtmp, &cancel_list, req_list) { - list_del(&req->req_list); P9_DPRINTK(P9_DEBUG_ERROR, "call back req %p\n", req); + list_del(&req->req_list); p9_client_cb(m->client, req); } } @@ -336,7 +336,8 @@ static void p9_read_work(struct work_struct *work) "mux %p pkt: size: %d bytes tag: %d\n", m, n, tag); m->req = p9_tag_lookup(m->client, tag); - if (!m->req) { + if (!m->req || (m->req->status != REQ_STATUS_SENT && + m->req->status != REQ_STATUS_FLSH)) { P9_DPRINTK(P9_DEBUG_ERROR, "Unexpected packet tag %d\n", tag); err = -EIO; @@ -361,10 +362,11 @@ static void p9_read_work(struct work_struct *work) if ((m->req) && (m->rpos == m->rsize)) { /* packet is read in */ P9_DPRINTK(P9_DEBUG_TRANS, "got new packet\n"); spin_lock(&m->client->lock); + if (m->req->status != REQ_STATUS_ERROR) + m->req->status = REQ_STATUS_RCVD; list_del(&m->req->req_list); spin_unlock(&m->client->lock); p9_client_cb(m->client, m->req); - m->rbuf = NULL; m->rpos = 0; m->rsize = 0; @@ -454,6 +456,7 @@ static void p9_write_work(struct work_struct *work) req = list_entry(m->unsent_req_list.next, struct p9_req_t, req_list); req->status = REQ_STATUS_SENT; + P9_DPRINTK(P9_DEBUG_TRANS, "move req %p\n", req); list_move_tail(&req->req_list, &m->req_list); m->wbuf = req->tc->sdata; @@ -683,12 +686,13 @@ static int p9_fd_cancel(struct p9_client *client, struct p9_req_t *req) P9_DPRINTK(P9_DEBUG_TRANS, "client %p req %p\n", client, req); spin_lock(&client->lock); - list_del(&req->req_list); if (req->status == REQ_STATUS_UNSENT) { + list_del(&req->req_list); req->status = REQ_STATUS_FLSHD; ret = 0; - } + } else if (req->status == REQ_STATUS_SENT) + req->status = REQ_STATUS_FLSH; spin_unlock(&client->lock); diff --git a/net/9p/trans_rdma.c b/net/9p/trans_rdma.c index 7fa0eb20b2f..ac4990041eb 100644 --- a/net/9p/trans_rdma.c +++ b/net/9p/trans_rdma.c @@ -295,6 +295,7 @@ handle_recv(struct p9_client *client, struct p9_trans_rdma *rdma, goto err_out; req->rc = c->rc; + req->status = REQ_STATUS_RCVD; p9_client_cb(client, req); return; diff --git a/net/9p/trans_virtio.c b/net/9p/trans_virtio.c index 2d7781ec663..bb8579a141a 100644 --- a/net/9p/trans_virtio.c +++ b/net/9p/trans_virtio.c @@ -134,6 +134,7 @@ static void req_done(struct virtqueue *vq) P9_DPRINTK(P9_DEBUG_TRANS, ": rc %p\n", rc); P9_DPRINTK(P9_DEBUG_TRANS, ": lookup tag %d\n", rc->tag); req = p9_tag_lookup(chan->client, rc->tag); + req->status = REQ_STATUS_RCVD; p9_client_cb(chan->client, req); } } diff --git a/net/atm/br2684.c b/net/atm/br2684.c index 334fcd4a4ea..3100a8940af 100644 --- a/net/atm/br2684.c +++ b/net/atm/br2684.c @@ -549,6 +549,7 @@ static void br2684_setup(struct net_device *netdev) struct br2684_dev *brdev = BRPRIV(netdev); ether_setup(netdev); + brdev->net_dev = netdev; netdev->netdev_ops = &br2684_netdev_ops; diff --git a/net/bluetooth/hci_conn.c b/net/bluetooth/hci_conn.c index 375f4b4f7f7..61309b26f27 100644 --- a/net/bluetooth/hci_conn.c +++ b/net/bluetooth/hci_conn.c @@ -248,6 +248,8 @@ struct hci_conn *hci_conn_add(struct hci_dev *hdev, int type, bdaddr_t *dst) if (hdev->notify) hdev->notify(hdev, HCI_NOTIFY_CONN_ADD); + hci_conn_init_sysfs(conn); + tasklet_enable(&hdev->tx_task); return conn; diff --git a/net/bluetooth/hci_sysfs.c b/net/bluetooth/hci_sysfs.c index b7c51082dde..582d8877078 100644 --- a/net/bluetooth/hci_sysfs.c +++ b/net/bluetooth/hci_sysfs.c @@ -9,7 +9,7 @@ struct class *bt_class = NULL; EXPORT_SYMBOL_GPL(bt_class); -static struct workqueue_struct *bluetooth; +static struct workqueue_struct *bt_workq; static inline char *link_typetostr(int type) { @@ -89,8 +89,8 @@ static void add_conn(struct work_struct *work) { struct hci_conn *conn = container_of(work, struct hci_conn, work_add); - /* ensure previous add/del is complete */ - flush_workqueue(bluetooth); + /* ensure previous del is complete */ + flush_work(&conn->work_del); if (device_add(&conn->dev) < 0) { BT_ERR("Failed to register connection device"); @@ -98,27 +98,6 @@ static void add_conn(struct work_struct *work) } } -void hci_conn_add_sysfs(struct hci_conn *conn) -{ - struct hci_dev *hdev = conn->hdev; - - BT_DBG("conn %p", conn); - - conn->dev.type = &bt_link; - conn->dev.class = bt_class; - conn->dev.parent = &hdev->dev; - - dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle); - - dev_set_drvdata(&conn->dev, conn); - - device_initialize(&conn->dev); - - INIT_WORK(&conn->work_add, add_conn); - - queue_work(bluetooth, &conn->work_add); -} - /* * The rfcomm tty device will possibly retain even when conn * is down, and sysfs doesn't support move zombie device, @@ -134,8 +113,11 @@ static void del_conn(struct work_struct *work) struct hci_conn *conn = container_of(work, struct hci_conn, work_del); struct hci_dev *hdev = conn->hdev; - /* ensure previous add/del is complete */ - flush_workqueue(bluetooth); + /* ensure previous add is complete */ + flush_work(&conn->work_add); + + if (!device_is_registered(&conn->dev)) + return; while (1) { struct device *dev; @@ -152,16 +134,40 @@ static void del_conn(struct work_struct *work) hci_dev_put(hdev); } -void hci_conn_del_sysfs(struct hci_conn *conn) +void hci_conn_init_sysfs(struct hci_conn *conn) { + struct hci_dev *hdev = conn->hdev; + BT_DBG("conn %p", conn); - if (!device_is_registered(&conn->dev)) - return; + conn->dev.type = &bt_link; + conn->dev.class = bt_class; + conn->dev.parent = &hdev->dev; + + dev_set_drvdata(&conn->dev, conn); + device_initialize(&conn->dev); + + INIT_WORK(&conn->work_add, add_conn); INIT_WORK(&conn->work_del, del_conn); +} + +void hci_conn_add_sysfs(struct hci_conn *conn) +{ + struct hci_dev *hdev = conn->hdev; + + BT_DBG("conn %p", conn); + + dev_set_name(&conn->dev, "%s:%d", hdev->name, conn->handle); + + queue_work(bt_workq, &conn->work_add); +} + +void hci_conn_del_sysfs(struct hci_conn *conn) +{ + BT_DBG("conn %p", conn); - queue_work(bluetooth, &conn->work_del); + queue_work(bt_workq, &conn->work_del); } static inline char *host_typetostr(int type) @@ -438,13 +444,13 @@ void hci_unregister_sysfs(struct hci_dev *hdev) int __init bt_sysfs_init(void) { - bluetooth = create_singlethread_workqueue("bluetooth"); - if (!bluetooth) + bt_workq = create_singlethread_workqueue("bluetooth"); + if (!bt_workq) return -ENOMEM; bt_class = class_create(THIS_MODULE, "bluetooth"); if (IS_ERR(bt_class)) { - destroy_workqueue(bluetooth); + destroy_workqueue(bt_workq); return PTR_ERR(bt_class); } @@ -453,7 +459,7 @@ int __init bt_sysfs_init(void) void bt_sysfs_cleanup(void) { - destroy_workqueue(bluetooth); + destroy_workqueue(bt_workq); class_destroy(bt_class); } diff --git a/net/core/dev.c b/net/core/dev.c index 308a7d0c277..e2e9e4af3ac 100644 --- a/net/core/dev.c +++ b/net/core/dev.c @@ -1735,11 +1735,12 @@ u16 skb_tx_hash(const struct net_device *dev, const struct sk_buff *skb) { u32 hash; - if (skb_rx_queue_recorded(skb)) { - hash = skb_get_rx_queue(skb); - } else if (skb->sk && skb->sk->sk_hash) { + if (skb_rx_queue_recorded(skb)) + return skb_get_rx_queue(skb) % dev->real_num_tx_queues; + + if (skb->sk && skb->sk->sk_hash) hash = skb->sk->sk_hash; - } else + else hash = skb->protocol; hash = jhash_1word(hash, skb_tx_hashrnd); diff --git a/net/core/skbuff.c b/net/core/skbuff.c index ce6356cd9f7..f091a5a845c 100644 --- a/net/core/skbuff.c +++ b/net/core/skbuff.c @@ -1365,9 +1365,8 @@ static void sock_spd_release(struct splice_pipe_desc *spd, unsigned int i) static inline struct page *linear_to_page(struct page *page, unsigned int *len, unsigned int *offset, - struct sk_buff *skb) + struct sk_buff *skb, struct sock *sk) { - struct sock *sk = skb->sk; struct page *p = sk->sk_sndmsg_page; unsigned int off; @@ -1405,13 +1404,14 @@ new_page: */ static inline int spd_fill_page(struct splice_pipe_desc *spd, struct page *page, unsigned int *len, unsigned int offset, - struct sk_buff *skb, int linear) + struct sk_buff *skb, int linear, + struct sock *sk) { if (unlikely(spd->nr_pages == PIPE_BUFFERS)) return 1; if (linear) { - page = linear_to_page(page, len, &offset, skb); + page = linear_to_page(page, len, &offset, skb, sk); if (!page) return 1; } else @@ -1442,7 +1442,8 @@ static inline void __segment_seek(struct page **page, unsigned int *poff, static inline int __splice_segment(struct page *page, unsigned int poff, unsigned int plen, unsigned int *off, unsigned int *len, struct sk_buff *skb, - struct splice_pipe_desc *spd, int linear) + struct splice_pipe_desc *spd, int linear, + struct sock *sk) { if (!*len) return 1; @@ -1465,7 +1466,7 @@ static inline int __splice_segment(struct page *page, unsigned int poff, /* the linear region may spread across several pages */ flen = min_t(unsigned int, flen, PAGE_SIZE - poff); - if (spd_fill_page(spd, page, &flen, poff, skb, linear)) + if (spd_fill_page(spd, page, &flen, poff, skb, linear, sk)) return 1; __segment_seek(&page, &poff, &plen, flen); @@ -1481,8 +1482,8 @@ static inline int __splice_segment(struct page *page, unsigned int poff, * pipe is full or if we already spliced the requested length. */ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, - unsigned int *len, - struct splice_pipe_desc *spd) + unsigned int *len, struct splice_pipe_desc *spd, + struct sock *sk) { int seg; @@ -1492,7 +1493,7 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, if (__splice_segment(virt_to_page(skb->data), (unsigned long) skb->data & (PAGE_SIZE - 1), skb_headlen(skb), - offset, len, skb, spd, 1)) + offset, len, skb, spd, 1, sk)) return 1; /* @@ -1502,7 +1503,7 @@ static int __skb_splice_bits(struct sk_buff *skb, unsigned int *offset, const skb_frag_t *f = &skb_shinfo(skb)->frags[seg]; if (__splice_segment(f->page, f->page_offset, f->size, - offset, len, skb, spd, 0)) + offset, len, skb, spd, 0, sk)) return 1; } @@ -1528,12 +1529,13 @@ int skb_splice_bits(struct sk_buff *skb, unsigned int offset, .ops = &sock_pipe_buf_ops, .spd_release = sock_spd_release, }; + struct sock *sk = skb->sk; /* * __skb_splice_bits() only fails if the output has no room left, * so no point in going over the frag_list for the error case. */ - if (__skb_splice_bits(skb, &offset, &tlen, &spd)) + if (__skb_splice_bits(skb, &offset, &tlen, &spd, sk)) goto done; else if (!tlen) goto done; @@ -1545,14 +1547,13 @@ int skb_splice_bits(struct sk_buff *skb, unsigned int offset, struct sk_buff *list = skb_shinfo(skb)->frag_list; for (; list && tlen; list = list->next) { - if (__skb_splice_bits(list, &offset, &tlen, &spd)) + if (__skb_splice_bits(list, &offset, &tlen, &spd, sk)) break; } } done: if (spd.nr_pages) { - struct sock *sk = skb->sk; int ret; /* diff --git a/net/ipv4/tcp_input.c b/net/ipv4/tcp_input.c index c96a6bb2543..eec3e6f9956 100644 --- a/net/ipv4/tcp_input.c +++ b/net/ipv4/tcp_input.c @@ -597,16 +597,6 @@ static void tcp_event_data_recv(struct sock *sk, struct sk_buff *skb) tcp_grow_window(sk, skb); } -static u32 tcp_rto_min(struct sock *sk) -{ - struct dst_entry *dst = __sk_dst_get(sk); - u32 rto_min = TCP_RTO_MIN; - - if (dst && dst_metric_locked(dst, RTAX_RTO_MIN)) - rto_min = dst_metric_rtt(dst, RTAX_RTO_MIN); - return rto_min; -} - /* Called to compute a smoothed rtt estimate. The data fed to this * routine either comes from timestamps, or from segments that were * known _not_ to have been retransmitted [see Karn/Partridge diff --git a/net/mac80211/main.c b/net/mac80211/main.c index fbcbed6cad0..14134193cd1 100644 --- a/net/mac80211/main.c +++ b/net/mac80211/main.c @@ -757,6 +757,7 @@ struct ieee80211_hw *ieee80211_alloc_hw(size_t priv_data_len, local->hw.conf.long_frame_max_tx_count = 4; local->hw.conf.short_frame_max_tx_count = 7; local->hw.conf.radio_enabled = true; + local->user_power_level = -1; INIT_LIST_HEAD(&local->interfaces); mutex_init(&local->iflist_mtx); @@ -909,6 +910,13 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) if (result < 0) goto fail_sta_info; + result = ieee80211_wep_init(local); + if (result < 0) { + printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n", + wiphy_name(local->hw.wiphy), result); + goto fail_wep; + } + rtnl_lock(); result = dev_alloc_name(local->mdev, local->mdev->name); if (result < 0) @@ -930,14 +938,6 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) goto fail_rate; } - result = ieee80211_wep_init(local); - - if (result < 0) { - printk(KERN_DEBUG "%s: Failed to initialize wep: %d\n", - wiphy_name(local->hw.wiphy), result); - goto fail_wep; - } - /* add one default STA interface if supported */ if (local->hw.wiphy->interface_modes & BIT(NL80211_IFTYPE_STATION)) { result = ieee80211_if_add(local, "wlan%d", NULL, @@ -967,13 +967,13 @@ int ieee80211_register_hw(struct ieee80211_hw *hw) return 0; -fail_wep: - rate_control_deinitialize(local); fail_rate: unregister_netdevice(local->mdev); local->mdev = NULL; fail_dev: rtnl_unlock(); + ieee80211_wep_free(local); +fail_wep: sta_info_stop(local); fail_sta_info: debugfs_hw_del(local); diff --git a/net/netfilter/Kconfig b/net/netfilter/Kconfig index 881203c4a14..cb3ad741ebf 100644 --- a/net/netfilter/Kconfig +++ b/net/netfilter/Kconfig @@ -837,6 +837,7 @@ config NETFILTER_XT_MATCH_SOCKET depends on NETFILTER_TPROXY depends on NETFILTER_XTABLES depends on NETFILTER_ADVANCED + depends on !NF_CONNTRACK || NF_CONNTRACK select NF_DEFRAG_IPV4 help This option adds a `socket' match, which can be used to match diff --git a/net/sched/cls_api.c b/net/sched/cls_api.c index 173fcc4b050..0759f32e9dc 100644 --- a/net/sched/cls_api.c +++ b/net/sched/cls_api.c @@ -254,7 +254,7 @@ replay: } tp->ops = tp_ops; tp->protocol = protocol; - tp->prio = nprio ? : tcf_auto_prio(*back); + tp->prio = nprio ? : TC_H_MAJ(tcf_auto_prio(*back)); tp->q = q; tp->classify = tp_ops->classify; tp->classid = parent; diff --git a/scripts/mod/modpost.c b/scripts/mod/modpost.c index 936b6f8e46f..161b7846733 100644 --- a/scripts/mod/modpost.c +++ b/scripts/mod/modpost.c @@ -384,11 +384,19 @@ static int parse_elf(struct elf_info *info, const char *filename) return 0; } /* Fix endianness in ELF header */ - hdr->e_shoff = TO_NATIVE(hdr->e_shoff); - hdr->e_shstrndx = TO_NATIVE(hdr->e_shstrndx); - hdr->e_shnum = TO_NATIVE(hdr->e_shnum); - hdr->e_machine = TO_NATIVE(hdr->e_machine); - hdr->e_type = TO_NATIVE(hdr->e_type); + hdr->e_type = TO_NATIVE(hdr->e_type); + hdr->e_machine = TO_NATIVE(hdr->e_machine); + hdr->e_version = TO_NATIVE(hdr->e_version); + hdr->e_entry = TO_NATIVE(hdr->e_entry); + hdr->e_phoff = TO_NATIVE(hdr->e_phoff); + hdr->e_shoff = TO_NATIVE(hdr->e_shoff); + hdr->e_flags = TO_NATIVE(hdr->e_flags); + hdr->e_ehsize = TO_NATIVE(hdr->e_ehsize); + hdr->e_phentsize = TO_NATIVE(hdr->e_phentsize); + hdr->e_phnum = TO_NATIVE(hdr->e_phnum); + hdr->e_shentsize = TO_NATIVE(hdr->e_shentsize); + hdr->e_shnum = TO_NATIVE(hdr->e_shnum); + hdr->e_shstrndx = TO_NATIVE(hdr->e_shstrndx); sechdrs = (void *)hdr + hdr->e_shoff; info->sechdrs = sechdrs; @@ -402,13 +410,16 @@ static int parse_elf(struct elf_info *info, const char *filename) /* Fix endianness in section headers */ for (i = 0; i < hdr->e_shnum; i++) { - sechdrs[i].sh_type = TO_NATIVE(sechdrs[i].sh_type); - sechdrs[i].sh_offset = TO_NATIVE(sechdrs[i].sh_offset); - sechdrs[i].sh_size = TO_NATIVE(sechdrs[i].sh_size); - sechdrs[i].sh_link = TO_NATIVE(sechdrs[i].sh_link); - sechdrs[i].sh_name = TO_NATIVE(sechdrs[i].sh_name); - sechdrs[i].sh_info = TO_NATIVE(sechdrs[i].sh_info); - sechdrs[i].sh_addr = TO_NATIVE(sechdrs[i].sh_addr); + sechdrs[i].sh_name = TO_NATIVE(sechdrs[i].sh_name); + sechdrs[i].sh_type = TO_NATIVE(sechdrs[i].sh_type); + sechdrs[i].sh_flags = TO_NATIVE(sechdrs[i].sh_flags); + sechdrs[i].sh_addr = TO_NATIVE(sechdrs[i].sh_addr); + sechdrs[i].sh_offset = TO_NATIVE(sechdrs[i].sh_offset); + sechdrs[i].sh_size = TO_NATIVE(sechdrs[i].sh_size); + sechdrs[i].sh_link = TO_NATIVE(sechdrs[i].sh_link); + sechdrs[i].sh_info = TO_NATIVE(sechdrs[i].sh_info); + sechdrs[i].sh_addralign = TO_NATIVE(sechdrs[i].sh_addralign); + sechdrs[i].sh_entsize = TO_NATIVE(sechdrs[i].sh_entsize); } /* Find symbol table. */ for (i = 1; i < hdr->e_shnum; i++) { @@ -716,7 +727,17 @@ int match(const char *sym, const char * const pat[]) /* sections that we do not want to do full section mismatch check on */ static const char *section_white_list[] = - { ".comment", ".debug*", ".stab*", ".note*", ".got*", ".toc*", NULL }; +{ + ".comment*", + ".debug*", + ".mdebug*", /* alpha, score, mips etc. */ + ".pdr", /* alpha, score, mips etc. */ + ".stab*", + ".note*", + ".got*", + ".toc*", + NULL +}; /* * This is used to find sections missing the SHF_ALLOC flag. diff --git a/security/selinux/hooks.c b/security/selinux/hooks.c index ba808ef6bab..2fcad7c33ea 100644 --- a/security/selinux/hooks.c +++ b/security/selinux/hooks.c @@ -3153,7 +3153,7 @@ static int selinux_file_send_sigiotask(struct task_struct *tsk, struct fown_struct *fown, int signum) { struct file *file; - u32 sid = current_sid(); + u32 sid = task_sid(tsk); u32 perm; struct file_security_struct *fsec; diff --git a/sound/core/pcm_lib.c b/sound/core/pcm_lib.c index 63d088f2265..a2a792c18c4 100644 --- a/sound/core/pcm_lib.c +++ b/sound/core/pcm_lib.c @@ -249,6 +249,12 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) new_hw_ptr = hw_base + pos; } } + /* Skip the jiffies check for hardwares with BATCH flag. + * Such hardware usually just increases the position at each IRQ, + * thus it can't give any strange position. + */ + if (runtime->hw.info & SNDRV_PCM_INFO_BATCH) + goto no_jiffies_check; hdelta = new_hw_ptr - old_hw_ptr; jdelta = jiffies - runtime->hw_ptr_jiffies; if (((hdelta * HZ) / runtime->rate) > jdelta + HZ/100) { @@ -272,6 +278,7 @@ static int snd_pcm_update_hw_ptr_interrupt(struct snd_pcm_substream *substream) hw_base -= hw_base % runtime->buffer_size; delta = 0; } + no_jiffies_check: if (delta > runtime->period_size + runtime->period_size / 2) { hw_ptr_error(substream, "Lost interrupts? " diff --git a/sound/isa/msnd/msnd.c b/sound/isa/msnd/msnd.c index 906454413ed..3a1526ae172 100644 --- a/sound/isa/msnd/msnd.c +++ b/sound/isa/msnd/msnd.c @@ -438,7 +438,8 @@ static void snd_msnd_capture_reset_queue(struct snd_msnd *chip, static struct snd_pcm_hardware snd_msnd_playback = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_MMAP_VALID, + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH, .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_8000_48000, .rate_min = 8000, @@ -456,7 +457,8 @@ static struct snd_pcm_hardware snd_msnd_playback = { static struct snd_pcm_hardware snd_msnd_capture = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | - SNDRV_PCM_INFO_MMAP_VALID, + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH, .formats = SNDRV_PCM_FMTBIT_U8 | SNDRV_PCM_FMTBIT_S16_LE, .rates = SNDRV_PCM_RATE_8000_48000, .rate_min = 8000, diff --git a/sound/pci/bt87x.c b/sound/pci/bt87x.c index a299340519d..ce3f2e90f4d 100644 --- a/sound/pci/bt87x.c +++ b/sound/pci/bt87x.c @@ -349,7 +349,8 @@ static struct snd_pcm_hardware snd_bt87x_digital_hw = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP_VALID, + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH, .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = 0, /* set at runtime */ .channels_min = 2, @@ -365,7 +366,8 @@ static struct snd_pcm_hardware snd_bt87x_analog_hw = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP_VALID, + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH, .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S8, .rates = SNDRV_PCM_RATE_KNOT, .rate_min = ANALOG_CLOCK / CLOCK_DIV_MAX, diff --git a/sound/pci/echoaudio/indigodjx.c b/sound/pci/echoaudio/indigodjx.c index 3482ef69f49..2e44316530a 100644 --- a/sound/pci/echoaudio/indigodjx.c +++ b/sound/pci/echoaudio/indigodjx.c @@ -88,6 +88,7 @@ static struct snd_pcm_hardware pcm_hardware_skel = { .rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_64000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000, .rate_min = 32000, diff --git a/sound/pci/echoaudio/indigoiox.c b/sound/pci/echoaudio/indigoiox.c index aebee27a40f..eb3819f9654 100644 --- a/sound/pci/echoaudio/indigoiox.c +++ b/sound/pci/echoaudio/indigoiox.c @@ -89,6 +89,7 @@ static struct snd_pcm_hardware pcm_hardware_skel = { .rates = SNDRV_PCM_RATE_32000 | SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000 | + SNDRV_PCM_RATE_64000 | SNDRV_PCM_RATE_88200 | SNDRV_PCM_RATE_96000, .rate_min = 32000, diff --git a/sound/pci/korg1212/korg1212.c b/sound/pci/korg1212/korg1212.c index 8b79969034b..7cc38a11e99 100644 --- a/sound/pci/korg1212/korg1212.c +++ b/sound/pci/korg1212/korg1212.c @@ -1238,7 +1238,8 @@ static struct snd_pcm_hardware snd_korg1212_playback_info = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED), + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BATCH), .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000), @@ -1258,7 +1259,8 @@ static struct snd_pcm_hardware snd_korg1212_capture_info = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED), + SNDRV_PCM_INFO_INTERLEAVED | + SNDRV_PCM_INFO_BATCH), .formats = SNDRV_PCM_FMTBIT_S16_LE, .rates = (SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000), diff --git a/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c b/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c index 01066c95580..d057e648964 100644 --- a/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c +++ b/sound/pcmcia/pdaudiocf/pdaudiocf_pcm.c @@ -240,7 +240,8 @@ static int pdacf_pcm_prepare(struct snd_pcm_substream *subs) static struct snd_pcm_hardware pdacf_pcm_capture_hw = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_PAUSE | SNDRV_PCM_INFO_RESUME | - SNDRV_PCM_INFO_MMAP_VALID), + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH), .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S24_3LE | SNDRV_PCM_FMTBIT_S24_3BE | SNDRV_PCM_FMTBIT_S32_LE | SNDRV_PCM_FMTBIT_S32_BE, diff --git a/sound/soc/au1x/dbdma2.c b/sound/soc/au1x/dbdma2.c index 30490a25914..594c6c5b783 100644 --- a/sound/soc/au1x/dbdma2.c +++ b/sound/soc/au1x/dbdma2.c @@ -82,7 +82,7 @@ static struct au1xpsc_audio_dmadata *au1xpsc_audio_pcmdma[2]; /* PCM hardware DMA capabilities - platform specific */ static const struct snd_pcm_hardware au1xpsc_pcm_hardware = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED, + SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BATCH, .formats = AU1XPSC_PCM_FMTS, .period_bytes_min = AU1XPSC_PERIOD_MIN_BYTES, .period_bytes_max = 4096 * 1024 - 1, diff --git a/sound/soc/codecs/twl4030.c b/sound/soc/codecs/twl4030.c index 921b205de28..df7c8c281d2 100644 --- a/sound/soc/codecs/twl4030.c +++ b/sound/soc/codecs/twl4030.c @@ -836,6 +836,12 @@ static DECLARE_TLV_DB_SCALE(analog_tlv, -2400, 200, 0); static DECLARE_TLV_DB_SCALE(output_tvl, -1200, 600, 1); /* + * Gain control for earpiece amplifier + * 0 dB to 12 dB in 6 dB steps (mute instead of -6) + */ +static DECLARE_TLV_DB_SCALE(output_ear_tvl, -600, 600, 1); + +/* * Capture gain after the ADCs * from 0 dB to 31 dB in 1 dB steps */ @@ -900,7 +906,7 @@ static const struct snd_kcontrol_new twl4030_snd_controls[] = { 4, 3, 0, output_tvl), SOC_SINGLE_TLV_TWL4030("Earpiece Playback Volume", - TWL4030_REG_EAR_CTL, 4, 3, 0, output_tvl), + TWL4030_REG_EAR_CTL, 4, 3, 0, output_ear_tvl), /* Common capture gain controls */ SOC_DOUBLE_R_TLV("TX1 Digital Capture Volume", diff --git a/sound/soc/codecs/wm8350.c b/sound/soc/codecs/wm8350.c index 3b1d0993bed..0275321ff8a 100644 --- a/sound/soc/codecs/wm8350.c +++ b/sound/soc/codecs/wm8350.c @@ -968,7 +968,7 @@ static int wm8350_pcm_trigger(struct snd_pcm_substream *substream, * required for LRC in master mode. The DACs or ADCs need a * valid audio path i.e. pin -> ADC or DAC -> pin before * the LRC will be enabled in master mode. */ - if (!master && cmd != SNDRV_PCM_TRIGGER_START) + if (!master || cmd != SNDRV_PCM_TRIGGER_START) return 0; if (substream->stream == SNDRV_PCM_STREAM_CAPTURE) { diff --git a/sound/soc/fsl/mpc5200_psc_i2s.c b/sound/soc/fsl/mpc5200_psc_i2s.c index 3aa729df27b..1111c710118 100644 --- a/sound/soc/fsl/mpc5200_psc_i2s.c +++ b/sound/soc/fsl/mpc5200_psc_i2s.c @@ -504,7 +504,8 @@ static struct snd_soc_dai psc_i2s_dai_template = { static const struct snd_pcm_hardware psc_i2s_pcm_hardware = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_MMAP_VALID | - SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER, + SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | + SNDRV_PCM_INFO_BATCH, .formats = SNDRV_PCM_FMTBIT_S8 | SNDRV_PCM_FMTBIT_S16_BE | SNDRV_PCM_FMTBIT_S24_BE | SNDRV_PCM_FMTBIT_S32_BE, .rate_min = 8000, diff --git a/sound/soc/sh/dma-sh7760.c b/sound/soc/sh/dma-sh7760.c index 0dad3a0bb92..baddb1242c7 100644 --- a/sound/soc/sh/dma-sh7760.c +++ b/sound/soc/sh/dma-sh7760.c @@ -103,7 +103,8 @@ static struct snd_pcm_hardware camelot_pcm_hardware = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP_VALID), + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH), .formats = DMABRG_FMTS, .rates = DMABRG_RATES, .rate_min = 8000, diff --git a/sound/sparc/dbri.c b/sound/sparc/dbri.c index af95ff1e126..1d2e51b3f91 100644 --- a/sound/sparc/dbri.c +++ b/sound/sparc/dbri.c @@ -1975,7 +1975,8 @@ static struct snd_pcm_hardware snd_dbri_pcm_hw = { .info = SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP_VALID, + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH, .formats = SNDRV_PCM_FMTBIT_MU_LAW | SNDRV_PCM_FMTBIT_A_LAW | SNDRV_PCM_FMTBIT_U8 | diff --git a/sound/usb/usx2y/usbusx2yaudio.c b/sound/usb/usx2y/usbusx2yaudio.c index 9a608fa8515..dd1ab617784 100644 --- a/sound/usb/usx2y/usbusx2yaudio.c +++ b/sound/usb/usx2y/usbusx2yaudio.c @@ -870,7 +870,8 @@ static struct snd_pcm_hardware snd_usX2Y_2c = { .info = (SNDRV_PCM_INFO_MMAP | SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER | - SNDRV_PCM_INFO_MMAP_VALID), + SNDRV_PCM_INFO_MMAP_VALID | + SNDRV_PCM_INFO_BATCH), .formats = SNDRV_PCM_FMTBIT_S16_LE | SNDRV_PCM_FMTBIT_S24_3LE, .rates = SNDRV_PCM_RATE_44100 | SNDRV_PCM_RATE_48000, .rate_min = 44100, |