diff options
| -rw-r--r-- | drivers/char/drm/via_dma.c | 59 | ||||
| -rw-r--r-- | drivers/char/drm/via_dmablit.c | 2 |
2 files changed, 54 insertions, 7 deletions
diff --git a/drivers/char/drm/via_dma.c b/drivers/char/drm/via_dma.c index 94baec692b5..7a339dba6a6 100644 --- a/drivers/char/drm/via_dma.c +++ b/drivers/char/drm/via_dma.c @@ -126,6 +126,8 @@ via_cmdbuf_wait(drm_via_private_t * dev_priv, unsigned int size) hw_addr, cur_addr, next_addr); return -1; } + if ((cur_addr < hw_addr) && (next_addr >= hw_addr)) + msleep(1); } while ((cur_addr < hw_addr) && (next_addr >= hw_addr)); return 0; } @@ -416,27 +418,50 @@ static int via_hook_segment(drm_via_private_t * dev_priv, int paused, count; volatile uint32_t *paused_at = dev_priv->last_pause_ptr; uint32_t reader,ptr; + uint32_t diff; paused = 0; via_flush_write_combine(); (void) *(volatile uint32_t *)(via_get_dma(dev_priv) -1); + *paused_at = pause_addr_lo; via_flush_write_combine(); (void) *paused_at; + reader = *(dev_priv->hw_addr_ptr); ptr = ((volatile char *)paused_at - dev_priv->dma_ptr) + dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr + 4; + dev_priv->last_pause_ptr = via_get_dma(dev_priv) - 1; - if ((ptr - reader) <= dev_priv->dma_diff ) { - count = 10000000; - while (!(paused = (VIA_READ(0x41c) & 0x80000000)) && count--); + /* + * If there is a possibility that the command reader will + * miss the new pause address and pause on the old one, + * In that case we need to program the new start address + * using PCI. + */ + + diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff; + count = 10000000; + while(diff == 0 && count--) { + paused = (VIA_READ(0x41c) & 0x80000000); + if (paused) + break; + reader = *(dev_priv->hw_addr_ptr); + diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff; } + paused = VIA_READ(0x41c) & 0x80000000; + if (paused && !no_pci_fire) { reader = *(dev_priv->hw_addr_ptr); - if ((ptr - reader) == dev_priv->dma_diff) { - + diff = (uint32_t) (ptr - reader) - dev_priv->dma_diff; + diff &= (dev_priv->dma_high - 1); + if (diff != 0 && diff < (dev_priv->dma_high >> 1)) { + DRM_ERROR("Paused at incorrect address. " + "0x%08x, 0x%08x 0x%08x\n", + ptr, reader, dev_priv->dma_diff); + } else if (diff == 0) { /* * There is a concern that these writes may stall the PCI bus * if the GPU is not idle. However, idling the GPU first @@ -577,6 +602,7 @@ static void via_cmdbuf_jump(drm_via_private_t * dev_priv) uint32_t pause_addr_lo, pause_addr_hi; uint32_t jump_addr_lo, jump_addr_hi; volatile uint32_t *last_pause_ptr; + uint32_t dma_low_save1, dma_low_save2; agp_base = dev_priv->dma_offset + (uint32_t) dev_priv->agpAddr; via_align_cmd(dev_priv, HC_HAGPBpID_JUMP, 0, &jump_addr_hi, @@ -603,8 +629,29 @@ static void via_cmdbuf_jump(drm_via_private_t * dev_priv) &pause_addr_lo, 0); *last_pause_ptr = pause_addr_lo; + dma_low_save1 = dev_priv->dma_low; - via_hook_segment( dev_priv, jump_addr_hi, jump_addr_lo, 0); + /* + * Now, set a trap that will pause the regulator if it tries to rerun the old + * command buffer. (Which may happen if via_hook_segment detecs a command regulator pause + * and reissues the jump command over PCI, while the regulator has already taken the jump + * and actually paused at the current buffer end). + * There appears to be no other way to detect this condition, since the hw_addr_pointer + * does not seem to get updated immediately when a jump occurs. + */ + + last_pause_ptr = + via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, + &pause_addr_lo, 0) - 1; + via_align_cmd(dev_priv, HC_HAGPBpID_PAUSE, 0, &pause_addr_hi, + &pause_addr_lo, 0); + *last_pause_ptr = pause_addr_lo; + + dma_low_save2 = dev_priv->dma_low; + dev_priv->dma_low = dma_low_save1; + via_hook_segment(dev_priv, jump_addr_hi, jump_addr_lo, 0); + dev_priv->dma_low = dma_low_save2; + via_hook_segment(dev_priv, pause_addr_hi, pause_addr_lo, 0); } diff --git a/drivers/char/drm/via_dmablit.c b/drivers/char/drm/via_dmablit.c index 33c5197b73c..409e00afdd0 100644 --- a/drivers/char/drm/via_dmablit.c +++ b/drivers/char/drm/via_dmablit.c @@ -603,7 +603,7 @@ via_build_sg_info(struct drm_device *dev, drm_via_sg_info_t *vsg, drm_via_dmabli * (Not a big limitation anyway.) */ - if ((xfer->mem_stride - xfer->line_length) >= PAGE_SIZE) { + if ((xfer->mem_stride - xfer->line_length) > 2*PAGE_SIZE) { DRM_ERROR("Too large system memory stride. Stride: %d, " "Length: %d\n", xfer->mem_stride, xfer->line_length); return -EINVAL; |